| /* |
| * Copyright (c) 2016,2017 MediaTek Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * See http://www.gnu.org/licenses/gpl-2.0.html for more details. |
| */ |
| |
| #include "btmtk_config.h" |
| #include <linux/version.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/module.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/cdev.h> |
| #include <linux/spinlock.h> |
| #include <linux/kallsyms.h> |
| #include <linux/device.h> |
| |
| #include "btmtk_define.h" |
| #include "btmtk_drv.h" |
| #include "btmtk_sdio.h" |
| |
| static dev_t g_devIDfwlog; |
| static struct class *pBTClass; |
| static struct device *pBTDev; |
| struct device *pBTDevfwlog; |
| static wait_queue_head_t inq; |
| static wait_queue_head_t fw_log_inq; |
| static struct fasync_struct *fasync; |
| /*static int btmtk_woble_state = BTMTK_WOBLE_STATE_UNKNOWN;*/ |
| |
| static int need_reset_stack; |
| /* The btmtk_sdio_remove() callback function is called |
| * when user removes this module from kernel space or ejects |
| * the card from the slot. The driver handles these 2 cases |
| * differently. |
| * If the user is removing the module, a MODULE_SHUTDOWN_REQ |
| * command is sent to firmware and interrupt will be disabled. |
| * If the card is removed, there is no need to send command |
| * or disable interrupt. |
| * |
| * The variable 'user_rmmod' is used to distinguish these two |
| * scenarios. This flag is initialized as FALSE in case the card |
| * is removed, and will be set to TRUE for module removal when |
| * module_exit function is called. |
| */ |
| |
| /*============================================================================*/ |
| /* Callback Functions */ |
| /*============================================================================*/ |
| |
| static u8 user_rmmod; |
| |
| struct completion g_done; |
| unsigned char probe_counter; |
| unsigned char current_fwdump_file_number; |
| struct btmtk_private *g_priv; |
| #define STR_COREDUMP_END "coredump end\n\n" |
| const u8 READ_ADDRESS_EVENT[] = { 0x0e, 0x0a, 0x01, 0x09, 0x10, 0x00 }; |
| |
| static struct ring_buffer metabuffer; |
| u8 probe_ready; |
| |
| static char fw_dump_file_name[FW_DUMP_FILE_NAME_SIZE] = {0}; |
| static char event_need_compare[EVENT_COMPARE_SIZE] = {0}; |
| static char event_need_compare_len; |
| static char event_compare_status; |
| /*add special header in the beginning of even, stack won't recognize these event*/ |
| static char event_add_spec_header_status; |
| |
| struct _OSAL_UNSLEEPABLE_LOCK_ event_compare_status_lock; |
| struct _OSAL_UNSLEEPABLE_LOCK_ tx_function_lock; |
| |
| |
| |
| int fw_dump_buffer_full; |
| int fw_dump_total_read_size; |
| int fw_dump_total_write_size; |
| int fw_dump_buffer_used_size; |
| int fw_dump_task_should_stop; |
| u8 *fw_dump_ptr; |
| u8 *fw_dump_read_ptr; |
| u8 *fw_dump_write_ptr; |
| struct timeval fw_dump_last_write_time; |
| int fw_dump_end_checking_task_should_stop; |
| int fw_is_doing_coredump; |
| int fw_is_coredump_end_packet; |
| |
| #if SAVE_FW_DUMP_IN_KERNEL |
| static struct file *fw_dump_file; |
| #else |
| static int fw_dump_file; |
| #endif |
| |
| static const struct btmtk_sdio_card_reg btmtk_reg_6630 = { |
| .cfg = 0x03, |
| .host_int_mask = 0x04, |
| .host_intstatus = 0x05, |
| .card_status = 0x20, |
| .sq_read_base_addr_a0 = 0x10, |
| .sq_read_base_addr_a1 = 0x11, |
| .card_fw_status0 = 0x40, |
| .card_fw_status1 = 0x41, |
| .card_rx_len = 0x42, |
| .card_rx_unit = 0x43, |
| .io_port_0 = 0x00, |
| .io_port_1 = 0x01, |
| .io_port_2 = 0x02, |
| .int_read_to_clear = false, |
| .func_num = 2, |
| .chip_id = 0x6630, |
| }; |
| |
| static const struct btmtk_sdio_card_reg btmtk_reg_6632 = { |
| .cfg = 0x03, |
| .host_int_mask = 0x04, |
| .host_intstatus = 0x05, |
| .card_status = 0x20, |
| .sq_read_base_addr_a0 = 0x10, |
| .sq_read_base_addr_a1 = 0x11, |
| .card_fw_status0 = 0x40, |
| .card_fw_status1 = 0x41, |
| .card_rx_len = 0x42, |
| .card_rx_unit = 0x43, |
| .io_port_0 = 0x00, |
| .io_port_1 = 0x01, |
| .io_port_2 = 0x02, |
| .int_read_to_clear = false, |
| .func_num = 2, |
| .chip_id = 0x6632, |
| }; |
| |
| static const struct btmtk_sdio_card_reg btmtk_reg_7668 = { |
| .cfg = 0x03, |
| .host_int_mask = 0x04, |
| .host_intstatus = 0x05, |
| .card_status = 0x20, |
| .sq_read_base_addr_a0 = 0x10, |
| .sq_read_base_addr_a1 = 0x11, |
| .card_fw_status0 = 0x40, |
| .card_fw_status1 = 0x41, |
| .card_rx_len = 0x42, |
| .card_rx_unit = 0x43, |
| .io_port_0 = 0x00, |
| .io_port_1 = 0x01, |
| .io_port_2 = 0x02, |
| .int_read_to_clear = false, |
| .func_num = 2, |
| .chip_id = 0x7668, |
| }; |
| |
| static const struct btmtk_sdio_card_reg btmtk_reg_7666 = { |
| .cfg = 0x03, |
| .host_int_mask = 0x04, |
| .host_intstatus = 0x05, |
| .card_status = 0x20, |
| .sq_read_base_addr_a0 = 0x10, |
| .sq_read_base_addr_a1 = 0x11, |
| .card_fw_status0 = 0x40, |
| .card_fw_status1 = 0x41, |
| .card_rx_len = 0x42, |
| .card_rx_unit = 0x43, |
| .io_port_0 = 0x00, |
| .io_port_1 = 0x01, |
| .io_port_2 = 0x02, |
| .int_read_to_clear = false, |
| .func_num = 2, |
| .chip_id = 0x7666, |
| }; |
| |
| static const struct btmtk_sdio_device btmtk_sdio_6630 = { |
| .helper = "mtmk/sd8688_helper.bin", |
| .firmware = "mt6632_patch_e1_hdr.bin", |
| .reg = &btmtk_reg_6630, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 64, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmtk_sdio_device btmtk_sdio_6632 = { |
| .helper = "mtmk/sd8688_helper.bin", |
| .firmware = "mt6632_patch_e1_hdr.bin", |
| .reg = &btmtk_reg_6632, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 64, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmtk_sdio_device btmtk_sdio_7668 = { |
| .helper = "mtmk/sd8688_helper.bin", |
| #if CFG_THREE_IN_ONE_FIRMWARE |
| .firmware = "MT7668_FW", |
| #else |
| .firmware = "mt7668_patch_e1_hdr.bin", |
| .firmware1 = "mt7668_patch_e2_hdr.bin", |
| #endif |
| .reg = &btmtk_reg_7668, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 64, |
| .supports_fw_dump = false, |
| }; |
| |
| static const struct btmtk_sdio_device btmtk_sdio_7666 = { |
| .helper = "mtmk/sd8688_helper.bin", |
| .firmware = "mt7668_patch_e1_hdr.bin", |
| .reg = &btmtk_reg_7666, |
| .support_pscan_win_report = false, |
| .sd_blksz_fw_dl = 64, |
| .supports_fw_dump = false, |
| }; |
| |
| |
| unsigned char *txbuf; |
| static unsigned char *rxbuf; |
| static u32 rx_length; |
| static struct btmtk_sdio_card *g_card; |
| |
| /* |
| * add in include/linux/mmc/sdio_ids.h |
| */ |
| #define SDIO_VENDOR_ID_MEDIATEK 0x037A |
| |
| static const struct sdio_device_id btmtk_sdio_ids[] = { |
| /* Mediatek SD8688 Bluetooth device */ |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x6630), |
| .driver_data = (unsigned long) &btmtk_sdio_6630 }, |
| |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x6632), |
| .driver_data = (unsigned long) &btmtk_sdio_6632 }, |
| |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7668), |
| .driver_data = (unsigned long) &btmtk_sdio_7668 }, |
| |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7666), |
| .driver_data = (unsigned long) &btmtk_sdio_7666 }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(sdio, btmtk_sdio_ids); |
| |
| |
| static void btmtk_sdio_woble_free_setting_struct(struct woble_setting_struct *woble_struct, int count) |
| { |
| int i = 0; |
| |
| for (i = 0; i < count; i++) { |
| if (woble_struct[i].content) { |
| pr_info("%s:kfree %d", __func__, i); |
| kfree(woble_struct[i].content); |
| woble_struct[i].content = NULL; |
| woble_struct[i].length = 0; |
| } else |
| woble_struct[i].length = 0; |
| } |
| } |
| |
| static void btmtk_sdio_woble_free_setting(void) |
| { |
| pr_info("%s begin", __func__); |
| if (g_card == NULL) { |
| pr_err("%s: g_data == NULL", __func__); |
| return; |
| } |
| |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_apcf, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_apcf_fill_mac, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_apcf_fill_mac_location, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_off, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_off_status_event, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_off_comp_event, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_on, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_on_status_event, WOBLE_SETTING_COUNT); |
| btmtk_sdio_woble_free_setting_struct(g_card->woble_setting_radio_on_comp_event, WOBLE_SETTING_COUNT); |
| |
| if (g_card->woble_setting_len) { |
| kfree(g_card->woble_setting); |
| g_card->woble_setting_len = 0; |
| g_card->woble_setting = NULL; |
| } |
| pr_info("%s end", __func__); |
| } |
| |
| static int btmtk_sdio_load_woble_block_setting(char *block_name, struct woble_setting_struct *save_content, |
| int save_content_count, u8 *searchconetnt) |
| { |
| int ret = 0; |
| int i = 0; |
| long parsing_result = 0; |
| u8 *search_result = NULL; |
| u8 *search_end = NULL; |
| u8 search[32]; |
| u8 temp[128]; /* save for total hex number */ |
| u8 *next_number = NULL; |
| u8 *next_block = NULL; |
| u8 number[8]; |
| int temp_len; |
| |
| memset(search, 0, sizeof(search)); |
| memset(temp, 0, sizeof(temp)); |
| memset(number, 0, sizeof(number)); |
| |
| /* search block name */ |
| for (i = 0; i < WOBLE_SETTING_COUNT; i++) { |
| temp_len = 0; |
| snprintf(search, sizeof(search), "%s%02d:", block_name, i); /* ex APCF01 */ |
| search_result = strstr(searchconetnt, search); |
| if (search_result) { |
| memset(temp, 0, sizeof(temp)); |
| temp_len = 0; |
| search_result += strlen(search); /* move to first number */ |
| |
| do { |
| next_number = NULL; |
| search_end = strstr(search_result, ","); |
| if ((search_end - search_result) <= 0) { |
| pr_info("%s can not find search end, break", __func__); |
| break; |
| } |
| |
| if ((search_end - search_result) > sizeof(number)) |
| break; |
| |
| memset(number, 0, sizeof(number)); |
| memcpy(number, search_result, search_end - search_result); |
| |
| if (number[0] == 0x20) /* space */ |
| ret = kstrtol(number + 1, 0, &parsing_result); |
| else |
| ret = kstrtol(number, 0, &parsing_result); |
| |
| if (ret == 0) { |
| if (temp_len >= sizeof(temp)) { |
| pr_err("%s: %s data over %zu", __func__, search, sizeof(temp)); |
| break; |
| } |
| temp[temp_len] = parsing_result; |
| temp_len++; |
| /* find next number */ |
| next_number = strstr(search_end, "0x"); |
| |
| /* find next block */ |
| next_block = strstr(search_end, ":"); |
| } else { |
| pr_debug("%s:kstrtol ret = %d, search %s", __func__, ret, search); |
| break; |
| } |
| |
| if (next_number == NULL) { |
| pr_debug("%s: not find next apcf number temp_len %d, break, search %s", |
| __func__, temp_len, search); |
| break; |
| } |
| |
| if ((next_number > next_block) && (next_block != 0)) { |
| pr_debug("%s: find next apcf number is over to next block ", __func__); |
| pr_debug("%s: temp_len %d, break, search %s", |
| __func__, temp_len, search); |
| break; |
| } |
| |
| search_result = search_end + 1; |
| } while (1); |
| } else |
| pr_debug("%s: %s is not found", __func__, search); |
| |
| if (temp_len) { |
| pr_info("%s: %s found", __func__, search); |
| pr_debug("%s: kzalloc i=%d temp_len=%d", __func__, i, temp_len); |
| save_content[i].content = kzalloc(temp_len, GFP_KERNEL); |
| memcpy(save_content[i].content, temp, temp_len); |
| save_content[i].length = temp_len; |
| pr_debug("%s:x save_content[%d].length %d temp_len=%d", |
| __func__, i, save_content[i].length, temp_len); |
| } |
| |
| } |
| return ret; |
| } |
| |
| static int btmtk_sdio_load_woble_setting(u8 *image, char *bin_name, |
| struct device *dev, u32 *code_len, struct btmtk_sdio_card *data) |
| { |
| int err; |
| const struct firmware *fw_entry = NULL; |
| |
| pr_info("%s: begin woble_setting_file_name = %s", __func__, bin_name); |
| err = request_firmware(&fw_entry, bin_name, dev); |
| if (err != 0) { |
| kfree(image); |
| image = NULL; |
| pr_err("%s: request_firmware function for woble setting fail!! error code = %d", __func__, err); |
| return err; |
| } |
| |
| if (fw_entry) { |
| image = kzalloc(fw_entry->size + 1, GFP_KERNEL); /* w:move to btmtk_usb_free_memory */ |
| pr_info("%s: woble_setting request_firmware size %zu success", __func__, fw_entry->size); |
| } else { |
| pr_err("%s: fw_entry is NULL request_firmware may fail!! error code = %d", __func__, err); |
| return err; |
| } |
| if (image == NULL) { |
| pr_err("%s: kzalloc size %zu failed!!", __func__, fw_entry->size); |
| *code_len = 0; |
| return err; |
| } |
| |
| memcpy(image, fw_entry->data, fw_entry->size); |
| image[fw_entry->size] = '\0'; |
| |
| *code_len = fw_entry->size; |
| pr_info("%s: code_len (%d) assign done", __func__, *code_len); |
| |
| err = btmtk_sdio_load_woble_block_setting("APCF", |
| data->woble_setting_apcf, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("APCF_ADD_MAC", |
| data->woble_setting_apcf_fill_mac, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("APCF_ADD_MAC_LOCATION", |
| data->woble_setting_apcf_fill_mac_location, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOOFF", |
| data->woble_setting_radio_off, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOOFF_STATUS_EVENT", |
| data->woble_setting_radio_off_status_event, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOOFF_COMPLETE_EVENT", |
| data->woble_setting_radio_off_comp_event, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOON", |
| data->woble_setting_radio_on, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOON_STATUS_EVENT", |
| data->woble_setting_radio_on_status_event, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("RADIOON_COMPLETE_EVENT", |
| data->woble_setting_radio_on_comp_event, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("APCF_RESMUE", |
| data->woble_setting_apcf_resume, WOBLE_SETTING_COUNT, image); |
| if (err) |
| goto LOAD_END; |
| |
| err = btmtk_sdio_load_woble_block_setting("APCF_COMPLETE_EVENT", |
| data->woble_setting_apcf_resume, WOBLE_SETTING_COUNT, image); |
| |
| LOAD_END: |
| if (err) |
| pr_info("%s: error return %d", __func__, err); |
| |
| return err; |
| } |
| |
| static inline void btmtk_sdio_woble_wake_lock(struct btmtk_sdio_card *data) |
| { |
| #if (SUPPORT_UNIFY_WOBLE & SUPPORT_ANDROID) |
| BTUSB_INFO("%s:", __func__); |
| wake_lock(&data->woble_wlock); |
| #endif |
| } |
| |
| static inline void btmtk_sdio_woble_wake_unlock(struct btmtk_sdio_card *data) |
| { |
| #if (SUPPORT_UNIFY_WOBLE & SUPPORT_ANDROID) |
| BTUSB_INFO("%s:", __func__); |
| wake_unlock(&data->woble_wlock); |
| #endif |
| } |
| |
| u32 lock_unsleepable_lock(struct _OSAL_UNSLEEPABLE_LOCK_ *pUSL) |
| { |
| spin_lock_irqsave(&(pUSL->lock), pUSL->flag); |
| return 0; |
| } |
| |
| u32 unlock_unsleepable_lock(struct _OSAL_UNSLEEPABLE_LOCK_ *pUSL) |
| { |
| spin_unlock_irqrestore(&(pUSL->lock), pUSL->flag); |
| return 0; |
| } |
| |
| static int btmtk_sdio_readb(u32 offset, u32 *val) |
| { |
| u32 ret = 0; |
| |
| if (g_card->func == NULL) { |
| pr_err("%s g_card->func is NULL\n", __func__); |
| return -EIO; |
| } |
| sdio_claim_host(g_card->func); |
| *val = sdio_readb(g_card->func, offset, &ret); |
| sdio_release_host(g_card->func); |
| return ret; |
| } |
| |
| static int btmtk_sdio_writel(u32 offset, u32 val) |
| { |
| u32 ret = 0; |
| |
| if (g_card->func == NULL) { |
| pr_err("%s g_card->func is NULL\n", __func__); |
| return -EIO; |
| } |
| sdio_claim_host(g_card->func); |
| sdio_writel(g_card->func, val, offset, &ret); |
| sdio_release_host(g_card->func); |
| return ret; |
| } |
| |
| static int btmtk_sdio_readl(u32 offset, u32 *val) |
| { |
| u32 ret = 0; |
| |
| if (g_card->func == NULL) { |
| pr_err("g_card->func is NULL\n"); |
| return -EIO; |
| } |
| sdio_claim_host(g_card->func); |
| *val = sdio_readl(g_card->func, offset, &ret); |
| sdio_release_host(g_card->func); |
| return ret; |
| } |
| |
| struct sk_buff *btmtk_create_send_data(struct sk_buff *skb) |
| { |
| struct sk_buff *queue_skb = NULL; |
| u32 sdio_header_len = skb->len + BTM_HEADER_LEN; |
| |
| if (skb_headroom(skb) < (BTM_HEADER_LEN)) { |
| queue_skb = bt_skb_alloc(sdio_header_len, GFP_ATOMIC); |
| if (queue_skb == NULL) { |
| pr_err("bt_skb_alloc fail return\n"); |
| return 0; |
| } |
| |
| queue_skb->data[0] = (sdio_header_len & 0x0000ff); |
| queue_skb->data[1] = (sdio_header_len & 0x00ff00) >> 8; |
| queue_skb->data[2] = 0; |
| queue_skb->data[3] = 0; |
| queue_skb->data[4] = bt_cb(skb)->pkt_type; |
| queue_skb->len = sdio_header_len; |
| memcpy(&queue_skb->data[5], &skb->data[0], skb->len); |
| kfree_skb(skb); |
| } else { |
| queue_skb = skb; |
| skb_push(queue_skb, BTM_HEADER_LEN); |
| queue_skb->data[0] = (sdio_header_len & 0x0000ff); |
| queue_skb->data[1] = (sdio_header_len & 0x00ff00) >> 8; |
| queue_skb->data[2] = 0; |
| queue_skb->data[3] = 0; |
| queue_skb->data[4] = bt_cb(skb)->pkt_type; |
| } |
| |
| pr_info("%s end\n", __func__); |
| return queue_skb; |
| } |
| |
| static int btmtk_sdio_set_own_back(int owntype) |
| { |
| /*Set driver own*/ |
| int ret = 0; |
| u32 u32LoopCount = 0; |
| u32 u32ReadCRValue = 0; |
| u32 ownValue = 0; |
| u32 set_checkretry = 30; |
| |
| pr_debug("%s owntype %d\n", __func__, owntype); |
| |
| if (user_rmmod) |
| set_checkretry = 1; |
| |
| ret = btmtk_sdio_readl(CHLPCR, &u32ReadCRValue); |
| |
| pr_debug("%s btmtk_sdio_readl CHLPCR done\n", __func__); |
| if (owntype == DRIVER_OWN) { |
| if ((u32ReadCRValue&0x100) == 0x100) { |
| pr_debug("%s already driver own 0x%0x, return\n", |
| __func__, u32ReadCRValue); |
| return ret; |
| } |
| } else if (owntype == FW_OWN) { |
| if ((u32ReadCRValue&0x100) == 0) { |
| pr_debug("%s already FW own 0x%0x, return\n", |
| __func__, u32ReadCRValue); |
| return ret; |
| } |
| } |
| |
| setretry: |
| |
| if (owntype == DRIVER_OWN) |
| ownValue = 0x00000200; |
| else |
| ownValue = 0x00000100; |
| |
| pr_debug("%s write CHLPCR 0x%x\n", __func__, ownValue); |
| ret = btmtk_sdio_writel(CHLPCR, ownValue); |
| if (ret) { |
| ret = -EINVAL; |
| goto done; |
| } |
| pr_debug("%s write CHLPCR 0x%x done\n", __func__, ownValue); |
| |
| u32LoopCount = 1000; |
| |
| if (owntype == DRIVER_OWN) { |
| do { |
| udelay(1); |
| ret = btmtk_sdio_readl(CHLPCR, &u32ReadCRValue); |
| u32LoopCount--; |
| pr_debug("%s DRIVER_OWN btmtk_sdio_readl CHLPCR 0x%x\n", |
| __func__, u32ReadCRValue); |
| } while ((u32LoopCount > 0) && |
| ((u32ReadCRValue&0x100) != 0x100)); |
| |
| if ((u32LoopCount == 0) && (0x100 != (u32ReadCRValue&0x100)) |
| && (set_checkretry > 0)) { |
| pr_warn("%s retry set_check driver own, CHLPCR 0x%x\n", |
| __func__, u32ReadCRValue); |
| set_checkretry--; |
| mdelay(20); |
| goto setretry; |
| } |
| } else { |
| do { |
| udelay(1); |
| ret = btmtk_sdio_readl(CHLPCR, &u32ReadCRValue); |
| u32LoopCount--; |
| pr_debug("%s FW_OWN btmtk_sdio_readl CHLPCR 0x%x\n", |
| __func__, u32ReadCRValue); |
| } while ((u32LoopCount > 0) && ((u32ReadCRValue&0x100) != 0)); |
| |
| if ((u32LoopCount == 0) && |
| ((u32ReadCRValue&0x100) != 0) && |
| (set_checkretry > 0)) { |
| pr_warn("%s retry set_check FW own, CHLPCR 0x%x\n", |
| __func__, u32ReadCRValue); |
| set_checkretry--; |
| goto setretry; |
| } |
| } |
| |
| pr_debug("%s CHLPCR(0x%x), is 0x%x\n", |
| __func__, CHLPCR, u32ReadCRValue); |
| |
| if (owntype == DRIVER_OWN) { |
| if ((u32ReadCRValue&0x100) == 0x100) |
| pr_debug("%s check %04x, is 0x100 driver own success\n", |
| __func__, CHLPCR); |
| else { |
| pr_debug("%s check %04x, is %x shuld be 0x100\n", |
| __func__, CHLPCR, u32ReadCRValue); |
| ret = EINVAL; |
| goto done; |
| } |
| } else { |
| if (0x0 == (u32ReadCRValue&0x100)) |
| pr_debug("%s check %04x, bit 8 is 0 FW own success\n", |
| __func__, CHLPCR); |
| else{ |
| pr_debug("%s bit 8 should be 0, %04x bit 8 is %04x\n", |
| __func__, u32ReadCRValue, |
| (u32ReadCRValue&0x100)); |
| ret = EINVAL; |
| goto done; |
| } |
| } |
| |
| done: |
| if (owntype == DRIVER_OWN) { |
| if (ret) |
| pr_err("%s set driver own fail\n", __func__); |
| else |
| pr_debug("%s set driver own success\n", __func__); |
| } else if (owntype == FW_OWN) { |
| if (ret) |
| pr_err("%s set FW own fail\n", __func__); |
| else |
| pr_debug("%s set FW own success\n", __func__); |
| } else |
| pr_err("%s unknown type %d\n", __func__, owntype); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_enable_interrupt(int enable) |
| { |
| u32 ret = 0; |
| u32 cr_value = 0; |
| |
| if (enable) |
| cr_value |= C_FW_INT_EN_SET; |
| else |
| cr_value |= C_FW_INT_EN_CLEAR; |
| |
| ret = btmtk_sdio_writel(CHLPCR, cr_value); |
| pr_debug("%s enable %d write CHLPCR 0x%08x\n", |
| __func__, enable, cr_value); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_get_rx_unit(struct btmtk_sdio_card *card) |
| { |
| u8 reg; |
| int ret; |
| |
| reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret); |
| if (!ret) |
| card->rx_unit = reg; |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_enable_host_int_mask( |
| struct btmtk_sdio_card *card, |
| u8 mask) |
| { |
| int ret; |
| |
| sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret); |
| if (ret) { |
| pr_err("Unable to enable the host interrupt!\n"); |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_disable_host_int_mask( |
| struct btmtk_sdio_card *card, |
| u8 mask) |
| { |
| u8 host_int_mask; |
| int ret; |
| |
| host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret); |
| if (ret) |
| return -EIO; |
| |
| host_int_mask &= ~mask; |
| |
| sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret); |
| if (ret < 0) { |
| pr_err("Unable to disable the host interrupt!\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /*for debug*/ |
| int btmtk_print_buffer_conent(u8 *buf, u32 Datalen) |
| { |
| int i = 0; |
| int print_finish = 0; |
| /*Print out txbuf data for debug*/ |
| for (i = 0; i <= (Datalen-1); i += 16) { |
| if ((i+16) <= Datalen) { |
| pr_debug("%s: %02X%02X%02X%02X%02X %02X%02X%02X%02X%02X %02X%02X%02X%02X%02X %02X\n", |
| __func__, |
| buf[i], buf[i+1], buf[i+2], buf[i+3], |
| buf[i+4], buf[i+5], buf[i+6], buf[i+7], |
| buf[i+8], buf[i+9], buf[i+10], buf[i+11], |
| buf[i+12], buf[i+13], buf[i+14], buf[i+15]); |
| } else { |
| for (; i < (Datalen); i++) |
| pr_debug("%s: %02X\n", __func__, buf[i]); |
| |
| print_finish = 1; |
| } |
| |
| if (print_finish) |
| break; |
| } |
| return 0; |
| } |
| |
| static int btmtk_sdio_send_tx_data(u8 *buffer, int tx_data_len) |
| { |
| int ret = 0; |
| u8 MultiBluckCount = 0; |
| u8 redundant = 0; |
| |
| MultiBluckCount = tx_data_len/SDIO_BLOCK_SIZE; |
| redundant = tx_data_len % SDIO_BLOCK_SIZE; |
| |
| if (redundant) |
| tx_data_len = (MultiBluckCount+1)*SDIO_BLOCK_SIZE; |
| |
| sdio_claim_host(g_card->func); |
| ret = sdio_writesb(g_card->func, CTDR, buffer, tx_data_len); |
| sdio_release_host(g_card->func); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_recv_rx_data(void) |
| { |
| int ret = 0; |
| u32 u32ReadCRValue = 0; |
| int retry_count = 5; |
| u32 sdio_header_length = 0; |
| |
| memset(rxbuf, 0, MTK_RXDATA_SIZE); |
| |
| do { |
| ret = btmtk_sdio_readl(CHISR, &u32ReadCRValue); |
| pr_debug("%s: loop Get CHISR 0x%08X\n", |
| __func__, u32ReadCRValue); |
| rx_length = (u32ReadCRValue & RX_PKT_LEN) >> 16; |
| if (rx_length == 0xFFFF) { |
| pr_warn("%s: 0xFFFF==rx_length, error return -EIO\n", |
| __func__); |
| ret = -EIO; |
| break; |
| } |
| |
| if ((RX_DONE&u32ReadCRValue) && rx_length) { |
| pr_debug("%s: u32ReadCRValue = %08X\n", |
| __func__, u32ReadCRValue); |
| u32ReadCRValue &= 0xFFFB; |
| ret = btmtk_sdio_writel(CHISR, u32ReadCRValue); |
| pr_debug("%s: write = %08X\n", |
| __func__, u32ReadCRValue); |
| |
| |
| sdio_claim_host(g_card->func); |
| ret = sdio_readsb(g_card->func, rxbuf, CRDR, rx_length); |
| sdio_release_host(g_card->func); |
| sdio_header_length = (rxbuf[1] << 8); |
| sdio_header_length |= rxbuf[0]; |
| |
| if (sdio_header_length != rx_length) { |
| pr_err("%s sdio header length %d, rx_length %d mismatch\n", |
| __func__, sdio_header_length, |
| rx_length); |
| break; |
| } |
| |
| if (sdio_header_length == 0) { |
| pr_warn("%s: get sdio_header_length = %d\n", |
| __func__, sdio_header_length); |
| continue; |
| } |
| |
| break; |
| } |
| |
| retry_count--; |
| if (retry_count <= 0) { |
| pr_warn("%s: retry_count = %d,timeout\n", |
| __func__, retry_count); |
| ret = -EIO; |
| break; |
| } |
| |
| /* msleep(1); */ |
| mdelay(3); |
| pr_debug("%s: retry_count = %d,wait\n", __func__, retry_count); |
| |
| if (ret) |
| break; |
| } while (1); |
| |
| if (ret) |
| return -EIO; |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_send_wmt_reset(void) |
| { |
| int ret = 0; |
| u8 wmt_event[8] = {4, 0xE4, 5, 2, 7, 1, 0, 0}; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| u8 mtksdio_wmt_reset[9] = {1, 0x6F, 0xFC, 5, 1, 7, 1, 0, 4}; |
| |
| pr_info("%s:\n", __func__); |
| mtksdio_packet_header[0] = sizeof(mtksdio_packet_header) + |
| sizeof(mtksdio_wmt_reset); |
| |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf+MTK_SDIO_PACKET_HEADER_SIZE, mtksdio_wmt_reset, |
| sizeof(mtksdio_wmt_reset)); |
| |
| btmtk_sdio_send_tx_data(txbuf, |
| MTK_SDIO_PACKET_HEADER_SIZE+sizeof(mtksdio_wmt_reset)); |
| btmtk_sdio_recv_rx_data(); |
| |
| /*compare rx data is wmt reset correct response or not*/ |
| if (memcmp(wmt_event, rxbuf+MTK_SDIO_PACKET_HEADER_SIZE, |
| sizeof(wmt_event)) != 0) { |
| ret = -EIO; |
| pr_warn("%s: fail\n", __func__); |
| } |
| |
| return ret; |
| } |
| |
| static u32 btmtk_sdio_bt_memRegister_read(u32 cr) |
| { |
| int retrytime = 300; |
| u32 result = 0; |
| u8 wmt_event[15] = {0x04, 0xE4, 0x10, 0x02, |
| 0x08, 0x0C/*0x1C*/, 0x00, 0x00, |
| 0x00, 0x00, 0x01, 0x00, |
| 0x00, 0x00, 0x80}; |
| /* msleep(1000); */ |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| u8 mtksdio_wmt_cmd[16] = {0x1, 0x6F, 0xFC, 0x0C, |
| 0x01, 0x08, 0x08, 0x00, |
| 0x02, 0x01, 0x00, 0x01, |
| 0x00, 0x00, 0x00, 0x00}; |
| mtksdio_packet_header[0] = sizeof(mtksdio_packet_header) |
| + sizeof(mtksdio_wmt_cmd); |
| pr_info("%s: read cr %x\n", __func__, cr); |
| |
| memcpy(&mtksdio_wmt_cmd[12], &cr, sizeof(cr)); |
| |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf + MTK_SDIO_PACKET_HEADER_SIZE, mtksdio_wmt_cmd, |
| sizeof(mtksdio_wmt_cmd)); |
| |
| btmtk_sdio_send_tx_data(txbuf, |
| MTK_SDIO_PACKET_HEADER_SIZE + sizeof(mtksdio_wmt_cmd)); |
| btmtk_print_buffer_conent(txbuf, |
| MTK_SDIO_PACKET_HEADER_SIZE + sizeof(mtksdio_wmt_cmd)); |
| |
| do { |
| usleep_range(10*1000, 15*1000); |
| btmtk_sdio_recv_rx_data(); |
| retrytime--; |
| if (retrytime <= 0) |
| break; |
| |
| pr_info("%s: retrytime %d\n", __func__, retrytime); |
| } while (!rxbuf[0]); |
| |
| btmtk_print_buffer_conent(rxbuf, rx_length); |
| /* compare rx data is wmt reset correct response or not */ |
| #if 0 |
| if (memcmp(wmt_event, |
| rxbuf+MTK_SDIO_PACKET_HEADER_SIZE, |
| sizeof(wmt_event)) != 0) { |
| ret = -EIO; |
| pr_info("%s: fail\n", __func__); |
| } |
| #endif |
| memcpy(&result, rxbuf+MTK_SDIO_PACKET_HEADER_SIZE + sizeof(wmt_event), |
| sizeof(result)); |
| pr_info("%s: ger cr 0x%x value 0x%x\n", __func__, cr, result); |
| return result; |
| } |
| |
| /* 1:on , 0:off */ |
| static int btmtk_sdio_bt_set_power(u8 onoff) |
| { |
| int ret = 0; |
| int retrytime = 60; |
| u8 wmt_event[8] = {4, 0xE4, 5, 2, 6, 1, 0, 0}; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| u8 mtksdio_wmt_cmd[10] = {1, 0x6F, 0xFC, 6, 1, 6, 2, 0, 0, 1}; |
| |
| if (onoff == 0) |
| retrytime = 3; |
| |
| mtksdio_packet_header[0] = |
| sizeof(mtksdio_packet_header) + sizeof(mtksdio_wmt_cmd); |
| pr_info("%s: onoff %d\n", __func__, onoff); |
| |
| mtksdio_wmt_cmd[9] = onoff; |
| |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf+MTK_SDIO_PACKET_HEADER_SIZE, mtksdio_wmt_cmd, |
| sizeof(mtksdio_wmt_cmd)); |
| |
| btmtk_sdio_send_tx_data(txbuf, |
| MTK_SDIO_PACKET_HEADER_SIZE+sizeof(mtksdio_wmt_cmd)); |
| |
| do { |
| msleep(100); |
| btmtk_sdio_recv_rx_data(); |
| retrytime--; |
| if (retrytime <= 0) |
| break; |
| |
| if (retrytime < 40) |
| pr_warn("%s: retry over 2s, retrytime %d\n", |
| __func__, retrytime); |
| |
| pr_debug("%s: retrytime %d\n", __func__, retrytime); |
| } while (!rxbuf[0]); |
| |
| |
| /*compare rx data is wmt reset correct response or not*/ |
| if (memcmp(wmt_event, rxbuf+MTK_SDIO_PACKET_HEADER_SIZE, |
| sizeof(wmt_event)) != 0) { |
| ret = -EIO; |
| pr_info("%s: fail\n", __func__); |
| } |
| |
| return ret; |
| } |
| |
| #if BTMTK_BIN_FILE_MODE |
| static int btmtk_sdio_send_and_check(u8 *cmd, u16 cmd_len, |
| u8 *event, u16 event_len) |
| { |
| int ret = 0; |
| int retrytime = 60; |
| int len = 0; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| |
| len = MTK_SDIO_PACKET_HEADER_SIZE + cmd_len; |
| |
| mtksdio_packet_header[0] = (len & 0x0000ff); |
| mtksdio_packet_header[1] = (len & 0x00ff00) >> 8; |
| |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf + MTK_SDIO_PACKET_HEADER_SIZE, cmd, cmd_len); |
| |
| btmtk_sdio_send_tx_data(txbuf, len); |
| |
| if (event && (event_len != 0)) { |
| do { |
| msleep(100); |
| btmtk_sdio_recv_rx_data(); |
| retrytime--; |
| if (retrytime <= 0) |
| break; |
| |
| if (retrytime < 40) |
| pr_warn("%s: retry over 2s, retrytime %d\n", |
| __func__, retrytime); |
| } while (!rxbuf[0]); |
| |
| if (memcmp(event, rxbuf + MTK_SDIO_PACKET_HEADER_SIZE, |
| event_len) != 0) { |
| ret = -EIO; |
| pr_warn("%s: fail\n", __func__); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static bool btmtk_is_bin_file_mode(uint8_t *buf, size_t buf_size) |
| { |
| char *p_buf = NULL; |
| char *ptr = NULL, *p = NULL; |
| bool ret = true; |
| |
| if (!buf) { |
| pr_warn("%s: buf is null\n", __func__); |
| return false; |
| } else if (buf_size < (strlen(E2P_MODE) + 2)) { |
| pr_warn("%s: incorrect buf size(%d)\n", |
| __func__, (int)buf_size); |
| return false; |
| } |
| |
| p_buf = kmalloc(buf_size + 1, GFP_KERNEL); |
| if (!p_buf) { |
| pr_warn("%s: alloc p_buf failed\n", __func__); |
| return false; |
| } |
| memcpy(p_buf, buf, buf_size); |
| p_buf[buf_size] = '\0'; |
| |
| /* find string */ |
| p = ptr = strstr(p_buf, E2P_MODE); |
| if (!ptr) { |
| pr_notice("%s: Can't find %s\n", __func__, E2P_MODE); |
| ret = false; |
| goto out; |
| } |
| |
| if (p > p_buf) { |
| p--; |
| while ((*p == ' ') && (p != p_buf)) |
| p--; |
| if (*p == '#') { |
| pr_notice("%s: It's not EEPROM - Bin file mode\n", __func__); |
| ret = false; |
| goto out; |
| } |
| } |
| |
| /* check access mode */ |
| ptr += (strlen(E2P_MODE) + 1); |
| if (*ptr != BIN_FILE_MODE) { |
| pr_notice("%s: It's not EEPROM - Bin file mode, mode: %c\n", __func__, *ptr); |
| ret = false; |
| goto out; |
| } |
| |
| out: |
| kfree(p_buf); |
| return ret; |
| } |
| |
| static void btmtk_set_eeprom2ctrler(uint8_t *buf, |
| size_t buf_size, |
| bool is7668) |
| { |
| int ret = -1; |
| uint8_t set_bdaddr[] = {0x01, 0x1A, 0xFC, 0x06, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; |
| uint8_t set_bdaddr_e[] = {0x04, 0x0E, 0x04, 0x01, |
| 0x1A, 0xFC, 0x00}; |
| uint8_t set_radio[] = {0x01, 0x79, 0xFC, 0x08, |
| 0x07, 0x80, 0x00, 0x06, 0x07, 0x07, 0x00, 0x00}; |
| uint8_t set_radio_e[] = {0x04, 0x0E, 0x04, 0x01, |
| 0x79, 0xFC, 0x00}; |
| uint8_t set_pwr_offset[] = {0x01, 0x93, 0xFC, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; |
| uint8_t set_pwr_offset_e[] = {0x04, 0x0E, 0x04, 0x01, |
| 0x93, 0xFC, 0x00}; |
| uint8_t set_xtal[] = {0x01, 0x0E, 0xFC, 0x02, 0x00, 0x00}; |
| uint8_t set_xtal_e[] = {0x04, 0x0E, 0x04, 0x01, |
| 0x0E, 0xFC, 0x00}; |
| uint16_t offset = 0; |
| |
| if (!buf) { |
| pr_warn("%s: buf is null\n", __func__); |
| return; |
| } else if ((is7668 == true && buf_size < 0x389) |
| || (is7668 == false && buf_size < 0x133)) { |
| pr_warn("%s: incorrect buf size(%d)\n", |
| __func__, (int)buf_size); |
| return; |
| } |
| |
| /* set BD address */ |
| if (is7668) |
| offset = 0x384; |
| else |
| offset = 0x1A; |
| |
| set_bdaddr[4] = *(buf + offset); |
| set_bdaddr[5] = *(buf + offset + 1); |
| set_bdaddr[6] = *(buf + offset + 2); |
| set_bdaddr[7] = *(buf + offset + 3); |
| set_bdaddr[8] = *(buf + offset + 4); |
| set_bdaddr[9] = *(buf + offset + 5); |
| ret = btmtk_sdio_send_and_check(set_bdaddr, sizeof(set_bdaddr), |
| set_bdaddr_e, sizeof(set_bdaddr_e)); |
| pr_notice("%s: set BDAddress(%02X-%02X-%02X-%02X-%02X-%02X) %s\n", |
| __func__, |
| set_bdaddr[9], set_bdaddr[8], set_bdaddr[7], |
| set_bdaddr[6], set_bdaddr[5], set_bdaddr[4], |
| ret < 0 ? "fail" : "OK"); |
| |
| /* radio setting - BT power */ |
| if (is7668) { |
| offset = 0x382; |
| /* BT default power */ |
| set_radio[4] = (*(buf + offset) & 0x07); |
| /* BLE default power */ |
| set_radio[8] = (*(buf + offset + 1) & 0x07); |
| /* TX MAX power */ |
| set_radio[9] = (*(buf + offset) & 0x70) >> 4; |
| /* TX power sub level */ |
| set_radio[10] = (*(buf + offset + 1) & 0x30) >> 4; |
| /* BR/EDR power diff mode */ |
| set_radio[11] = (*(buf + offset + 1) & 0xc0) >> 6; |
| } else { |
| offset = 0x132; |
| /* BT default power */ |
| set_radio[4] = *(buf + offset); |
| /* BLE default power(no this for 7662 in table) */ |
| set_radio[8] = *(buf + offset); |
| /* TX MAX power */ |
| set_radio[9] = *(buf + offset + 1); |
| } |
| ret = btmtk_sdio_send_and_check(set_radio, sizeof(set_radio), |
| set_radio_e, sizeof(set_radio_e)); |
| pr_notice("%s: set radio(BT/BLE default power: %d/%d MAX power: %d) %s\n", |
| __func__, |
| set_radio[4], set_radio[8], set_radio[9], |
| ret < 0 ? "fail" : "OK"); |
| |
| /* |
| * BT TX power compensation for low, middle and high |
| * channel |
| */ |
| if (is7668) { |
| offset = 0x36D; |
| /* length */ |
| set_pwr_offset[3] = 6; |
| /* Group 0 CH 0 ~ CH14 */ |
| set_pwr_offset[4] = *(buf + offset); |
| /* Group 1 CH15 ~ CH27 */ |
| set_pwr_offset[5] = *(buf + offset + 1); |
| /* Group 2 CH28 ~ CH40 */ |
| set_pwr_offset[6] = *(buf + offset + 2); |
| /* Group 3 CH41 ~ CH53 */ |
| set_pwr_offset[7] = *(buf + offset + 3); |
| /* Group 4 CH54 ~ CH66 */ |
| set_pwr_offset[8] = *(buf + offset + 4); |
| /* Group 5 CH67 ~ CH84 */ |
| set_pwr_offset[9] = *(buf + offset + 5); |
| } else { |
| offset = 0x139; |
| /* length */ |
| set_pwr_offset[3] = 3; |
| /* low channel */ |
| set_pwr_offset[4] = *(buf + offset); |
| /* middle channel */ |
| set_pwr_offset[5] = *(buf + offset + 1); |
| /* high channel */ |
| set_pwr_offset[6] = *(buf + offset + 2); |
| } |
| ret = btmtk_sdio_send_and_check(set_pwr_offset, sizeof(set_pwr_offset), |
| set_pwr_offset_e, sizeof(set_pwr_offset_e)); |
| pr_notice("%s: set power offset(%02X %02X %02X %02X %02X %02X) %s\n", |
| __func__, |
| set_pwr_offset[4], set_pwr_offset[5], |
| set_pwr_offset[6], set_pwr_offset[7], |
| set_pwr_offset[8], set_pwr_offset[9], |
| ret < 0 ? "fail" : "OK"); |
| |
| /* XTAL setting */ |
| if (is7668) { |
| offset = 0xF4; |
| /* BT default power */ |
| set_xtal[4] = *(buf + offset); |
| set_xtal[5] = *(buf + offset + 1); |
| ret = btmtk_sdio_send_and_check(set_xtal, sizeof(set_xtal), |
| set_xtal_e, sizeof(set_xtal_e)); |
| pr_notice("%s: set XTAL(0x%02X %02X) %s\n", |
| __func__, |
| set_xtal[4], set_xtal[5], |
| ret < 0 ? "fail" : "OK"); |
| } |
| } |
| |
| static void btmtk_eeprom_bin_file(struct btmtk_sdio_card *card) |
| { |
| char *cfg_file = NULL; |
| char bin_file[32]; |
| |
| const struct firmware *cfg_fw = NULL; |
| const struct firmware *bin_fw = NULL; |
| |
| int ret = -1; |
| int chipid = card->func->device; |
| |
| pr_notice("%s: %X series\n", __func__, chipid); |
| cfg_file = E2P_ACCESS_MODE_SWITCHER; |
| sprintf(bin_file, E2P_BIN_FILE, chipid); |
| |
| usleep_range(10*1000, 15*1000); |
| |
| /* request configure file */ |
| ret = request_firmware(&cfg_fw, cfg_file, &card->func->dev); |
| if (ret < 0) { |
| if (ret == -ENOENT) |
| pr_notice("%s: Configure file not found, ignore EEPROM bin file\n", |
| __func__); |
| else |
| pr_notice("%s: request configure file fail(%d)\n", |
| __func__, ret); |
| return; |
| } |
| |
| if (btmtk_is_bin_file_mode((uint8_t *)cfg_fw->data, cfg_fw->size) == false) |
| goto exit2; |
| |
| usleep_range(10*1000, 15*1000); |
| |
| /* open bin file for EEPROM */ |
| ret = request_firmware(&bin_fw, bin_file, &card->func->dev); |
| if (ret < 0) { |
| pr_notice("%s: request bin file fail(%d)\n", |
| __func__, ret); |
| goto exit2; |
| } |
| |
| /* set parameters to controller */ |
| btmtk_set_eeprom2ctrler((uint8_t *)bin_fw->data, |
| bin_fw->size, |
| (card->func->device == 0x7668 ? true : false)); |
| |
| exit2: |
| if (cfg_fw) |
| release_firmware(cfg_fw); |
| if (bin_fw) |
| release_firmware(bin_fw); |
| } |
| #endif |
| |
| /* 1:on , 0:off */ |
| static int btmtk_sdio_set_sleep(void) |
| { |
| int ret = 0; |
| u8 wmt_event[8] = {4, 0xE, 4, 1, 0x7A, 0xFC, 0}; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| u8 mtksdio_wmt_cmd[11] = {1, 0x7A, 0xFC, 7, |
| /*3:sdio, 5:usb*/03, |
| /*host non sleep duration*/0x80, 0x02, |
| /*host non sleep duration*/0x80, 0x02, 0x0, 0x00}; |
| |
| mtksdio_packet_header[0] = |
| sizeof(mtksdio_packet_header) + sizeof(mtksdio_wmt_cmd); |
| pr_info("%s begin\n", __func__); |
| |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf+MTK_SDIO_PACKET_HEADER_SIZE, mtksdio_wmt_cmd, |
| sizeof(mtksdio_wmt_cmd)); |
| |
| btmtk_sdio_send_tx_data(txbuf, |
| MTK_SDIO_PACKET_HEADER_SIZE+sizeof(mtksdio_wmt_cmd)); |
| btmtk_sdio_recv_rx_data(); |
| btmtk_print_buffer_conent(rxbuf, rx_length); |
| /*compare rx data is wmt reset correct response or not*/ |
| if (memcmp(wmt_event, rxbuf+MTK_SDIO_PACKET_HEADER_SIZE, |
| sizeof(wmt_event)) != 0) { |
| ret = -EIO; |
| pr_info("%s: fail\n", __func__); |
| } |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_host_to_card(struct btmtk_private *priv, |
| u8 *payload, u16 nb) |
| { |
| struct btmtk_sdio_card *card = priv->btmtk_dev.card; |
| int ret = 0; |
| int i = 0; |
| u8 MultiBluckCount = 0; |
| u8 redundant = 0; |
| |
| //lock_unsleepable_lock(&tx_function_lock); |
| |
| if (payload != txbuf) { |
| memset(txbuf, 0, MTK_TXDATA_SIZE); |
| memcpy(txbuf, payload, nb); |
| } |
| |
| if (!card || !card->func) { |
| pr_err("card or function is NULL!\n"); |
| //unlock_unsleepable_lock(&tx_function_lock); |
| return -EINVAL; |
| } |
| |
| MultiBluckCount = nb/SDIO_BLOCK_SIZE; |
| redundant = nb % SDIO_BLOCK_SIZE; |
| |
| if (redundant) |
| nb = (MultiBluckCount+1)*SDIO_BLOCK_SIZE; |
| |
| if (nb < 16) |
| btmtk_print_buffer_conent(txbuf, nb); |
| else |
| btmtk_print_buffer_conent(txbuf, 16); |
| |
| do { |
| /* Transfer data to card */ |
| sdio_claim_host(card->func); |
| ret = sdio_writesb(card->func, CTDR, txbuf, nb); |
| sdio_release_host(card->func); |
| if (ret < 0) { |
| i++; |
| pr_err("i=%d writesb failed: %d\n", i, ret); |
| pr_err("hex: %*ph\n", nb, txbuf); |
| ret = -EIO; |
| if (i > MAX_WRITE_IOMEM_RETRY) |
| goto exit; |
| } |
| } while (ret); |
| |
| if (priv) |
| priv->btmtk_dev.tx_dnld_rdy = false; |
| |
| exit: |
| |
| //unlock_unsleepable_lock(&tx_function_lock); |
| return ret; |
| } |
| |
| static int btmtk_sdio_set_i2s_slave(void) |
| { |
| int ret = 0; |
| u8 wmt_event[7] = { 4, 0xE, 4, 1, 0x72, 0xFC, 0 }; |
| u8 cmd[] = { 1, 0x72, 0xFC, 4, 03, 0x10, 0x00, 0x02 }; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = { 0 }; |
| |
| pr_info("%s\n", __func__); |
| mtksdio_packet_header[0] = sizeof(mtksdio_packet_header) + sizeof(cmd); |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf + MTK_SDIO_PACKET_HEADER_SIZE, cmd, sizeof(cmd)); |
| btmtk_sdio_send_tx_data(txbuf, MTK_SDIO_PACKET_HEADER_SIZE + sizeof(cmd)); |
| |
| btmtk_sdio_recv_rx_data(); |
| |
| pr_debug("%s rx_length %d\n", __func__, rx_length); |
| pr_debug("%s rx_length %d %02x%02x%02x%02x%02x\%02x%02x%02x%02x%02x%02x%02x\n", __func__, |
| rx_length, rxbuf[0], rxbuf[1], rxbuf[2], rxbuf[3], rxbuf[4] |
| , rxbuf[5], rxbuf[6], rxbuf[7], rxbuf[8], rxbuf[9] |
| , rxbuf[10], rxbuf[11]); |
| /* compare rx data is wmt reset correct response or not */ |
| if (memcmp(wmt_event, rxbuf + MTK_SDIO_PACKET_HEADER_SIZE, sizeof(wmt_event)) != 0) { |
| ret = -EIO; |
| pr_err("%s: fail\n", __func__); |
| } |
| return ret; |
| } |
| |
| static int btmtk_sdio_read_pin_mux_setting(u32 *value) |
| { |
| int ret = 0; |
| u8 cmd[] = { 1, 0xD1, 0xFC, 4, 0x54, 0x30, 0x02, 0x81 }; |
| u8 tempvalue = 0; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = { 0 }; |
| |
| pr_info("%s\n", __func__); |
| mtksdio_packet_header[0] = sizeof(mtksdio_packet_header) + sizeof(cmd); |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf + MTK_SDIO_PACKET_HEADER_SIZE, cmd, sizeof(cmd)); |
| pr_debug("%s tx buf %02x%02x%02x%02x%02x\%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| __func__, txbuf[0], txbuf[1], txbuf[2], txbuf[3], txbuf[4] |
| , txbuf[5], txbuf[6], txbuf[7], txbuf[8], txbuf[9] |
| , txbuf[10], txbuf[11], txbuf[12], txbuf[13], txbuf[14]); |
| btmtk_sdio_send_tx_data(txbuf, MTK_SDIO_PACKET_HEADER_SIZE + sizeof(cmd)); |
| |
| btmtk_sdio_recv_rx_data(); |
| |
| pr_debug("%s rx_length %d\n", __func__, rx_length); |
| pr_debug |
| ("%s rx_length %d %02x%02x%02x%02x%02x\%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| __func__, rx_length, rxbuf[0], rxbuf[1], rxbuf[2], rxbuf[3], rxbuf[4] |
| , rxbuf[5], rxbuf[6], rxbuf[7], rxbuf[8], rxbuf[9] |
| , rxbuf[10], rxbuf[11], rxbuf[12], rxbuf[13], rxbuf[14]); |
| |
| if (rx_length >= 15) { |
| tempvalue = rxbuf[14]; |
| *value = (rxbuf[14] << 24) + (rxbuf[13] << 16) + (rxbuf[12] << 8) + rxbuf[11]; |
| pr_debug("%s value=%08x\n", __func__, *value); |
| } else |
| ret = -EIO; |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_write_pin_mux_setting(u32 value) |
| { |
| int ret = 0; |
| u8 event[7] = { 4, 0xE, 4, 1, 0xD0, 0xFC, 0 }; |
| u8 cmd[12] = { 1, 0xD0, 0xFC, 8, 0x54, 0x30, 0x02, 0x81, 0, 0, 0, 0 }; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = { 0 }; |
| |
| pr_info("%s begin\n", __func__); |
| cmd[8] = (value & 0x000000FF); |
| cmd[9] = ((value & 0x0000FF00) >> 8); |
| cmd[10] = ((value & 0x00FF0000) >> 16); |
| cmd[11] = ((value & 0xFF000000) >> 24); |
| |
| pr_debug("%s value=%08x begin\n", __func__, value); |
| mtksdio_packet_header[0] = sizeof(mtksdio_packet_header) + sizeof(cmd); |
| memcpy(txbuf, mtksdio_packet_header, MTK_SDIO_PACKET_HEADER_SIZE); |
| memcpy(txbuf + MTK_SDIO_PACKET_HEADER_SIZE, cmd, sizeof(cmd)); |
| |
| pr_debug("%s tx buf %02x%02x%02x%02x%02x\%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| __func__, txbuf[0], txbuf[1], txbuf[2], txbuf[3], txbuf[4], |
| txbuf[5], txbuf[6], txbuf[7], txbuf[8], txbuf[9], |
| txbuf[10], txbuf[11], txbuf[12], txbuf[13], txbuf[14], txbuf[15]); |
| |
| btmtk_sdio_send_tx_data(txbuf, MTK_SDIO_PACKET_HEADER_SIZE + sizeof(cmd)); |
| |
| btmtk_sdio_recv_rx_data(); |
| |
| pr_debug("%s rx_length %d\n", __func__, rx_length); |
| pr_debug |
| ("%s rx_length %d %02x%02x%02x%02x%02x\%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| __func__, rx_length, rxbuf[0], rxbuf[1], rxbuf[2], rxbuf[3], rxbuf[4] |
| , rxbuf[5], rxbuf[6], rxbuf[7], rxbuf[8], rxbuf[9] |
| , rxbuf[10], rxbuf[11], rxbuf[12], rxbuf[13], rxbuf[14]); |
| |
| /* compare rx data is wmt reset correct response or not */ |
| if (memcmp(event, rxbuf + MTK_SDIO_PACKET_HEADER_SIZE, sizeof(event)) != 0) { |
| ret = -EIO; |
| pr_err("%s: fail\n", __func__); |
| } |
| return ret; |
| |
| } |
| |
| static int btmtk_send_rom_patch(u8 *fwbuf, u32 fwlen, int mode) |
| { |
| int ret = 0; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| int stp_len = 0; |
| u8 mtkdata_header[MTKDATA_HEADER_SIZE] = {0}; |
| |
| int copy_len = 0; |
| int Datalen = fwlen; |
| u32 u32ReadCRValue = 0; |
| |
| |
| pr_debug("%s fwlen %d, mode = %d\n", __func__, fwlen, mode); |
| if (fwlen < Datalen) { |
| pr_err("%s file size = %d,is not corect\n", __func__, fwlen); |
| return -ENOENT; |
| } |
| |
| stp_len = Datalen + MTKDATA_HEADER_SIZE; |
| |
| |
| mtkdata_header[0] = 0x2;/*ACL data*/ |
| mtkdata_header[1] = 0x6F; |
| mtkdata_header[2] = 0xFC; |
| |
| mtkdata_header[3] = ((Datalen+4+1)&0x00FF); |
| mtkdata_header[4] = ((Datalen+4+1)&0xFF00)>>8; |
| |
| mtkdata_header[5] = 0x1; |
| mtkdata_header[6] = 0x1; |
| |
| mtkdata_header[7] = ((Datalen+1)&0x00FF); |
| mtkdata_header[8] = ((Datalen+1)&0xFF00)>>8; |
| |
| mtkdata_header[9] = mode; |
| |
| /* 0 and 1 is packet length, include MTKSTP_HEADER_SIZE */ |
| mtksdio_packet_header[0] = |
| (Datalen+4+MTKSTP_HEADER_SIZE+6)&0xFF; |
| mtksdio_packet_header[1] = |
| ((Datalen+4+MTKSTP_HEADER_SIZE+6)&0xFF00)>>8; |
| mtksdio_packet_header[2] = 0; |
| mtksdio_packet_header[3] = 0; |
| |
| /* |
| * mtksdio_packet_header[2] and mtksdio_packet_header[3] |
| * are reserved |
| */ |
| pr_debug("%s result %02x %02x\n", __func__, |
| ((Datalen+4+MTKSTP_HEADER_SIZE+6)&0xFF00)>>8, |
| (Datalen+4+MTKSTP_HEADER_SIZE+6)); |
| |
| memcpy(txbuf+copy_len, mtksdio_packet_header, |
| MTK_SDIO_PACKET_HEADER_SIZE); |
| copy_len += MTK_SDIO_PACKET_HEADER_SIZE; |
| |
| memcpy(txbuf+copy_len, mtkdata_header, MTKDATA_HEADER_SIZE); |
| copy_len += MTKDATA_HEADER_SIZE; |
| |
| memcpy(txbuf+copy_len, fwbuf, Datalen); |
| copy_len += Datalen; |
| |
| pr_debug("%s txbuf %02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| __func__, |
| txbuf[0], txbuf[1], txbuf[2], txbuf[3], txbuf[4], |
| txbuf[5], txbuf[6], txbuf[7], txbuf[8], txbuf[9]); |
| |
| |
| ret = btmtk_sdio_readl(CHIER, &u32ReadCRValue); |
| pr_debug("%s: CHIER u32ReadCRValue %x, ret %d\n", |
| __func__, u32ReadCRValue, ret); |
| |
| ret = btmtk_sdio_readl(CHLPCR, &u32ReadCRValue); |
| pr_debug("%s: CHLPCR u32ReadCRValue %x, ret %d\n", |
| __func__, u32ReadCRValue, ret); |
| |
| ret = btmtk_sdio_readl(CHISR, &u32ReadCRValue); |
| pr_debug("%s: 0CHISR u32ReadCRValue %x, ret %d\n", |
| __func__, u32ReadCRValue, ret); |
| ret = btmtk_sdio_readl(CHISR, &u32ReadCRValue); |
| pr_debug("%s: 00CHISR u32ReadCRValue %x, ret %d\n", |
| __func__, u32ReadCRValue, ret); |
| |
| btmtk_sdio_send_tx_data(txbuf, copy_len); |
| |
| ret = btmtk_sdio_recv_rx_data(); |
| |
| return ret; |
| } |
| |
| |
| |
| /* |
| * type: cmd:1, ACL:2 |
| * ------------------------------------------------- |
| * mtksdio hedaer 4 byte| wmt header | |
| * |
| * |
| * data len should less than 512-4-4 |
| */ |
| static int btmtk_sdio_send_wohci(u8 type, u32 len, u8 *data) |
| { |
| u32 ret = 0; |
| u32 push_in_data_len = 0; |
| u8 mtk_wmt_header[MTKWMT_HEADER_SIZE] = {0}; |
| u8 mtksdio_packet_header[MTK_SDIO_PACKET_HEADER_SIZE] = {0}; |
| u8 mtk_tx_data[512] = {0}; |
| |
| mtk_wmt_header[0] = type; |
| mtk_wmt_header[1] = 0x6F; |
| mtk_wmt_header[2] = 0xFC; |
| mtk_wmt_header[3] = len; |
| |
| mtksdio_packet_header[0] = |
| (len+MTKWMT_HEADER_SIZE+MTK_SDIO_PACKET_HEADER_SIZE)&0xFF; |
| mtksdio_packet_header[1] = |
| ((len+MTKWMT_HEADER_SIZE+MTK_SDIO_PACKET_HEADER_SIZE)&0xFF00) |
| >>8; |
| mtksdio_packet_header[2] = 0; |
| mtksdio_packet_header[3] = 0; |
| /* |
| * mtksdio_packet_header[2] and mtksdio_packet_header[3] |
| * are reserved |
| */ |
| |
| memcpy(mtk_tx_data, mtksdio_packet_header, |
| sizeof(mtksdio_packet_header)); |
| push_in_data_len += sizeof(mtksdio_packet_header); |
| |
| memcpy(mtk_tx_data+push_in_data_len, mtk_wmt_header, |
| sizeof(mtk_wmt_header)); |
| push_in_data_len += sizeof(mtk_wmt_header); |
| |
| memcpy(mtk_tx_data+push_in_data_len, data, len); |
| push_in_data_len += len; |
| |
| sdio_claim_host(g_card->func); |
| ret = sdio_writesb(g_card->func, CTDR, mtk_tx_data, push_in_data_len); |
| sdio_release_host(g_card->func); |
| |
| pr_info("%s retrun 0x%0x\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * data event: |
| * return |
| * 0: |
| * patch download is not complete/get patch semaphore fail |
| * 1: |
| * patch download is complete by others |
| * 2 |
| * patch download is not coplete |
| * 3:(for debug) |
| * release patch semaphore success |
| */ |
| static int btmtk_sdio_need_load_rom_patch(void) |
| { |
| u32 ret = -1; |
| u8 cmd[] = {0x1, 0x17, 0x1, 0x0, 0x1}; |
| u8 event[] = {0x2, 0x17, 0x1, 0x0}; |
| |
| do { |
| ret = btmtk_sdio_send_wohci(HCI_COMMAND_PKT, sizeof(cmd), cmd); |
| |
| if (ret) { |
| pr_err("%s btmtk_sdio_send_wohci return fail ret %d\n", |
| __func__, ret); |
| break; |
| } |
| |
| ret = btmtk_sdio_recv_rx_data(); |
| if (ret) |
| break; |
| |
| if (rx_length == 12) { |
| if (memcmp(rxbuf+7, event, sizeof(event)) == 0) |
| return rxbuf[11]; |
| |
| pr_err("%s receive event content is not correct, print receive data\n", |
| __func__); |
| btmtk_print_buffer_conent(rxbuf, rx_length); |
| } |
| } while (0); |
| pr_err("%s return ret %d\n", __func__, ret); |
| return ret; |
| } |
| static int btmtk_sdio_set_write_clear(void) |
| { |
| u32 u32ReadCRValue = 0; |
| u32 ret = 0; |
| |
| ret = btmtk_sdio_readl(CHCR, &u32ReadCRValue); |
| if (ret) { |
| pr_err("%s read CHCR error\n", __func__); |
| ret = EINVAL; |
| return ret; |
| } |
| |
| u32ReadCRValue |= 0x00000002; |
| btmtk_sdio_writel(CHCR, u32ReadCRValue); |
| pr_info("%s write CHCR 0x%08X\n", __func__, u32ReadCRValue); |
| ret = btmtk_sdio_readl(CHCR, &u32ReadCRValue); |
| pr_info("%s read CHCR 0x%08X\n", __func__, u32ReadCRValue); |
| if (u32ReadCRValue&0x00000002) |
| pr_info("%s write clear\n", __func__); |
| else |
| pr_info("%s read clear\n", __func__); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_set_i2s(void) |
| { |
| int ret = 0; |
| u32 pinmux = 0; |
| |
| ret = btmtk_sdio_set_i2s_slave(); |
| if (ret) { |
| pr_err("btmtk_sdio_set_i2s_slave error(%d)\n", ret); |
| return ret; |
| } |
| ret = btmtk_sdio_read_pin_mux_setting(&pinmux); |
| if (ret) { |
| pr_err("btmtk_sdio_read_pin_mux_setting error(%d)\n", ret); |
| return ret; |
| } |
| |
| pinmux &= 0x0000FFFF; |
| pinmux |= 0x22220000; |
| ret = btmtk_sdio_write_pin_mux_setting(pinmux); |
| |
| if (ret) { |
| pr_err("btmtk_sdio_write_pin_mux_setting error(%d)\n", ret); |
| return ret; |
| } |
| |
| pinmux = 0; |
| ret = btmtk_sdio_read_pin_mux_setting(&pinmux); |
| if (ret) { |
| pr_err("btmtk_sdio_read_pin_mux_setting error(%d)\n", ret); |
| return ret; |
| } |
| pr_info("confirm pinmux %04x\n", pinmux); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_download_rom_patch( |
| struct btmtk_sdio_card *card) |
| { |
| const struct firmware *fw_firmware = NULL; |
| const u8 *firmware = NULL; |
| int firmwarelen, ret = 0; |
| void *tmpfwbuf = NULL; |
| u8 *fwbuf; |
| struct _PATCH_HEADER *patchHdr; |
| u8 *cDateTime = NULL; |
| u16 u2HwVer = 0; |
| u16 u2SwVer = 0; |
| u32 u4PatchVer = 0; |
| u32 uhwversion = 0; |
| |
| u32 u32ReadCRValue = 0; |
| |
| int RedundantSize = 0; |
| u32 bufferOffset = 0; |
| u8 patch_status = 0; |
| |
| ret = btmtk_sdio_set_own_back(DRIVER_OWN); |
| |
| if (ret) |
| return ret; |
| |
| patch_status = btmtk_sdio_need_load_rom_patch(); |
| |
| pr_debug("%s patch_status %d\n", __func__, patch_status); |
| |
| if (patch_status == PATCH_IS_DOWNLOAD_BT_OTHER || |
| patch_status == PATCH_READY) { |
| pr_info("%s patch is ready no need load patch again\n", |
| __func__); |
| |
| ret = btmtk_sdio_readl(0, &u32ReadCRValue); |
| pr_info("%s read chipid = %x\n", __func__, u32ReadCRValue); |
| |
| /*Set interrupt output*/ |
| ret = btmtk_sdio_writel(CHIER, FIRMWARE_INT|TX_FIFO_OVERFLOW | |
| FW_INT_IND_INDICATOR | TX_COMPLETE_COUNT | |
| TX_UNDER_THOLD | TX_EMPTY | RX_DONE); |
| |
| if (ret) { |
| pr_err("Set interrupt output fail(%d)\n", ret); |
| ret = -EIO; |
| } |
| |
| /*enable interrupt output*/ |
| ret = btmtk_sdio_writel(CHLPCR, C_FW_INT_EN_SET); |
| if (ret) { |
| pr_err("enable interrupt output fail(%d)\n", ret); |
| ret = -EIO; |
| goto done; |
| } |
| |
| ret = btmtk_sdio_bt_set_power(1); |
| if (ret) |
| return ret; |
| |
| #if BTMTK_BIN_FILE_MODE |
| /* Send hci cmd before sleep */ |
| btmtk_eeprom_bin_file(card); |
| #endif |
| |
| ret = btmtk_sdio_set_sleep(); |
| btmtk_sdio_set_write_clear(); |
| return ret; |
| } |
| |
| uhwversion = btmtk_sdio_bt_memRegister_read(HW_VERSION); |
| pr_info("%s uhwversion 0x%x\n", __func__, uhwversion); |
| |
| if (uhwversion == 0x8A00) { |
| pr_info("%s request_firmware(firmware name %s)\n", |
| __func__, card->firmware); |
| ret = request_firmware(&fw_firmware, card->firmware, |
| &card->func->dev); |
| |
| if ((ret < 0) || !fw_firmware) { |
| pr_err("request_firmware(firmware name %s) failed, error code = %d\n", |
| card->firmware, |
| ret); |
| ret = -ENOENT; |
| goto done; |
| } |
| } else { |
| pr_info("%s request_firmware(firmware name %s)\n", |
| __func__, card->firmware1); |
| ret = request_firmware(&fw_firmware, |
| card->firmware1, |
| &card->func->dev); |
| |
| if ((ret < 0) || !fw_firmware) { |
| pr_err("request_firmware(firmware name %s) failed, error code = %d\n", |
| card->firmware1, ret); |
| ret = -ENOENT; |
| goto done; |
| } |
| } |
| |
| firmware = fw_firmware->data; |
| firmwarelen = fw_firmware->size; |
| |
| pr_debug("Downloading FW image (%d bytes)\n", firmwarelen); |
| |
| tmpfwbuf = kzalloc(firmwarelen, GFP_KERNEL); |
| |
| if (!tmpfwbuf) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| /* Ensure aligned firmware buffer */ |
| memcpy(tmpfwbuf, firmware, firmwarelen); |
| fwbuf = tmpfwbuf; |
| |
| /*Display rom patch info*/ |
| patchHdr = (struct _PATCH_HEADER *)fwbuf; |
| cDateTime = patchHdr->ucDateTime; |
| u2HwVer = patchHdr->u2HwVer; |
| u2SwVer = patchHdr->u2SwVer; |
| u4PatchVer = patchHdr->u4PatchVer; |
| |
| pr_debug("=====================================\n"); |
| pr_info("===============Patch Info============\n"); |
| pr_info("Built Time = %s\n", cDateTime); |
| pr_info("Hw Ver = 0x%x\n", |
| ((u2HwVer & 0x00ff) << 8) | ((u2HwVer & 0xff00) >> 8)); |
| pr_info("Sw Ver = 0x%x\n", |
| ((u2SwVer & 0x00ff) << 8) | ((u2SwVer & 0xff00) >> 8)); |
| pr_info("Patch Ver = 0x%04x\n", |
| ((u4PatchVer & 0xff000000) >> 24) | |
| ((u4PatchVer & 0x00ff0000) >> 16)); |
| pr_info("Platform = %c%c%c%c\n", |
| patchHdr->ucPlatform[0], |
| patchHdr->ucPlatform[1], |
| patchHdr->ucPlatform[2], |
| patchHdr->ucPlatform[3]); |
| pr_info("Patch start addr = %02x\n", patchHdr->u2PatchStartAddr); |
| pr_info("=====================================\n"); |
| |
| fwbuf += sizeof(struct _PATCH_HEADER); |
| pr_debug("%s PATCH_HEADER size %zd\n", |
| __func__, sizeof(struct _PATCH_HEADER)); |
| firmwarelen -= sizeof(struct _PATCH_HEADER); |
| |
| ret = btmtk_sdio_readl(0, &u32ReadCRValue); |
| pr_info("%s read chipid = %x\n", __func__, u32ReadCRValue); |
| |
| /*Set interrupt output*/ |
| ret = btmtk_sdio_writel(CHIER, FIRMWARE_INT|TX_FIFO_OVERFLOW | |
| FW_INT_IND_INDICATOR | TX_COMPLETE_COUNT | |
| TX_UNDER_THOLD | TX_EMPTY | RX_DONE); |
| |
| if (ret) { |
| pr_err("Set interrupt output fail(%d)\n", ret); |
| ret = -EIO; |
| goto done; |
| } |
| |
| /*enable interrupt output*/ |
| ret = btmtk_sdio_writel(CHLPCR, C_FW_INT_EN_SET); |
| |
| if (ret) { |
| pr_err("enable interrupt output fail(%d)\n", ret); |
| ret = -EIO; |
| goto done; |
| } |
| |
| RedundantSize = firmwarelen; |
| pr_debug("%s firmwarelen %d\n", __func__, firmwarelen); |
| |
| do { |
| bufferOffset = firmwarelen - RedundantSize; |
| |
| if (RedundantSize == firmwarelen && |
| RedundantSize >= PATCH_DOWNLOAD_SIZE) |
| ret = btmtk_send_rom_patch(fwbuf+bufferOffset, |
| PATCH_DOWNLOAD_SIZE, SDIO_PATCH_DOWNLOAD_FIRST); |
| else if (RedundantSize == firmwarelen) |
| ret = btmtk_send_rom_patch(fwbuf+bufferOffset, |
| RedundantSize, SDIO_PATCH_DOWNLOAD_FIRST); |
| else if (RedundantSize < PATCH_DOWNLOAD_SIZE) { |
| ret = btmtk_send_rom_patch(fwbuf+bufferOffset, |
| RedundantSize, SDIO_PATCH_DOWNLOAD_END); |
| pr_debug("%s patch downoad last patch part\n", |
| __func__); |
| } else |
| ret = btmtk_send_rom_patch(fwbuf+bufferOffset, |
| PATCH_DOWNLOAD_SIZE, SDIO_PATCH_DOWNLOAD_CON); |
| |
| RedundantSize -= PATCH_DOWNLOAD_SIZE; |
| |
| if (ret) { |
| pr_err("%s btmtk_send_rom_patch fail\n", __func__); |
| goto done; |
| } |
| pr_debug("%s RedundantSize %d\n", __func__, RedundantSize); |
| if (RedundantSize <= 0) { |
| pr_debug("%s patch downoad finish\n", __func__); |
| break; |
| } |
| } while (1); |
| |
| btmtk_sdio_set_write_clear(); |
| |
| if (btmtk_sdio_need_load_rom_patch() == PATCH_READY) |
| pr_info("%s patchdownload is done by BT\n", __func__); |
| |
| |
| ret = btmtk_sdio_send_wmt_reset(); |
| |
| if (ret) |
| goto done; |
| |
| ret = btmtk_sdio_bt_set_power(1); |
| |
| if (ret) { |
| ret = EINVAL; |
| goto done; |
| } |
| |
| #if BTMTK_BIN_FILE_MODE |
| /* Send hci cmd before sleep */ |
| btmtk_eeprom_bin_file(card); |
| #endif |
| |
| ret = btmtk_sdio_set_sleep(); |
| |
| done: |
| |
| kfree(tmpfwbuf); |
| release_firmware(fw_firmware); |
| |
| if (!ret) |
| pr_info("%s success\n", __func__); |
| else |
| pr_info("%s fail\n", __func__); |
| |
| return ret; |
| } |
| |
| static void btmtk_sdio_for_code_style(void) |
| { |
| pr_info("%s vfs_fsync\n", __func__); |
| |
| #if SAVE_FW_DUMP_IN_KERNEL |
| if (fw_dump_file) |
| vfs_fsync(fw_dump_file, 0); |
| #endif |
| |
| if (fw_dump_file) { |
| pr_info("%s : close file %s\n", |
| __func__, fw_dump_file_name); |
| #if SAVE_FW_DUMP_IN_KERNEL |
| filp_close(fw_dump_file, NULL); |
| /* #endif */ |
| fw_dump_file = NULL; |
| #endif |
| fw_is_doing_coredump = false; |
| fw_is_coredump_end_packet = true; |
| } else { |
| fw_is_doing_coredump = false; |
| pr_info("%s : fw_dump_file is NULL can't close file %s\n", |
| __func__, fw_dump_file_name); |
| } |
| } |
| |
| static int btmtk_sdio_card_to_host(struct btmtk_private *priv, const u8 *event, const int event_len, |
| int add_spec_header) |
| /*event: check event which want to compare*/ |
| /*return value: -x fail, 0 success*/ |
| { |
| u16 buf_len = 0; |
| int ret = 0; |
| struct sk_buff *skb = NULL; |
| struct sk_buff *fops_skb = NULL; |
| u32 type; |
| u32 fourbalignment_len = 0; |
| u32 dump_len = 0; |
| char *core_dump_end = NULL; |
| u16 org_packet_len = 0; |
| int i = 0; |
| unsigned char spec_header[] = { 0xff, 0x00, 0xFE, 0x00 }; |
| |
| #if SUPPORT_FW_DUMP |
| fw_is_coredump_end_packet = false; |
| if (rx_length > (SDIO_HEADER_LEN+8)) { |
| if (rxbuf[SDIO_HEADER_LEN] == 0x80) { |
| dump_len = (rxbuf[SDIO_HEADER_LEN+1]&0x0F)*256 |
| + rxbuf[SDIO_HEADER_LEN+2]; |
| pr_notice("%s get dump length %d\n", |
| __func__, dump_len); |
| if (rxbuf[SDIO_HEADER_LEN+5] == 0x6F && |
| rxbuf[SDIO_HEADER_LEN+6] == 0xFC) { |
| |
| fw_is_doing_coredump = true; |
| |
| #if SAVE_FW_DUMP_IN_KERNEL |
| if ((fw_dump_total_read_size == 0) |
| && (fw_dump_file == NULL)) { |
| if (current_fwdump_file_number |
| == probe_counter) |
| goto FW_DONE; |
| /* #if SAVE_FW_DUMP_IN_KERNEL */ |
| memset(fw_dump_file_name, 0, |
| sizeof(fw_dump_file_name)); |
| snprintf(fw_dump_file_name, |
| sizeof(fw_dump_file_name), |
| FW_DUMP_FILE_NAME"_%d", |
| probe_counter); |
| pr_warn("%s : open file %s\n", |
| __func__, |
| fw_dump_file_name); |
| fw_dump_file = filp_open( |
| fw_dump_file_name, |
| O_RDWR | O_CREAT, |
| 0644); |
| if (fw_dump_file) { |
| current_fwdump_file_number = |
| probe_counter; |
| pr_warn("%s : open file %s success\n", |
| __func__, |
| fw_dump_file_name); |
| } else |
| pr_warn("%s : open file %s fail\n", |
| __func__, |
| fw_dump_file_name); |
| /* #endif */ |
| } |
| #endif |
| fw_dump_total_read_size += dump_len; |
| |
| #if SAVE_FW_DUMP_IN_KERNEL |
| if (fw_dump_file->f_op == NULL) |
| pr_warn("%s : fw_dump_file->f_op is NULL\n", |
| __func__); |
| |
| if (fw_dump_file->f_op->write == NULL) |
| pr_warn("%s : fw_dump_file->f_op->write is NULL\n", |
| __func__); |
| |
| |
| if ((dump_len > 0) && fw_dump_file) |
| fw_dump_file->f_op->write(fw_dump_file, |
| &rxbuf[SDIO_HEADER_LEN+10], |
| dump_len, |
| &fw_dump_file->f_pos); |
| |
| #endif |
| |
| if (dump_len >= sizeof(FW_DUMP_END_EVENT)) { |
| core_dump_end = strstr( |
| &rxbuf[SDIO_HEADER_LEN+10], |
| FW_DUMP_END_EVENT); |
| pr_warn("%s : core_dump_end %d\n", |
| __func__, SDIO_HEADER_LEN); |
| if (core_dump_end) |
| btmtk_sdio_for_code_style(); |
| } |
| } |
| } |
| } |
| #endif |
| |
| #if SAVE_FW_DUMP_IN_KERNEL |
| FW_DONE: |
| #endif |
| |
| type = rxbuf[MTK_SDIO_PACKET_HEADER_SIZE]; |
| |
| btmtk_print_buffer_conent(rxbuf, rx_length); |
| |
| /* Read the length of data to be transferred , not include pkt type*/ |
| buf_len = rx_length-(MTK_SDIO_PACKET_HEADER_SIZE+1); |
| |
| pr_debug("buf_len : %d\n", buf_len); |
| if (rx_length <= SDIO_HEADER_LEN) { |
| pr_warn("invalid packet length: %d\n", buf_len); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Allocate buffer */ |
| /* rx_length = num_blocks * blksz + BTSDIO_DMA_ALIGN*/ |
| skb = bt_skb_alloc(rx_length, GFP_ATOMIC); |
| if (skb == NULL) { |
| pr_warn("No free skb\n"); |
| ret = -ENOMEM; |
| goto exit; |
| } |
| |
| pr_debug("%s rx_length %d,buf_len %d\n", __func__, rx_length, buf_len); |
| |
| memcpy(skb->data, &rxbuf[MTK_SDIO_PACKET_HEADER_SIZE+1], buf_len); |
| |
| switch (type) { |
| case HCI_ACLDATA_PKT: |
| pr_debug("%s data[2] 0x%02x, data[3] 0x%02x\n", |
| __func__, skb->data[2], skb->data[3]); |
| buf_len = skb->data[2] + skb->data[3]*256 + 4; |
| pr_debug("%s acl buf_len %d\n", __func__, buf_len); |
| break; |
| case HCI_SCODATA_PKT: |
| buf_len = skb->data[3] + 3; |
| break; |
| case HCI_EVENT_PKT: |
| buf_len = skb->data[1] + 2; |
| break; |
| } |
| |
| if (event_compare_status == BTMTK_SDIO_EVENT_COMPARE_STATE_NEED_COMPARE) |
| BTSDIO_INFO_RAW(skb->data, buf_len, "%s: skb->data :", __func__); |
| |
| if ((buf_len >= sizeof(READ_ADDRESS_EVENT)) |
| && (event_compare_status == BTMTK_SDIO_EVENT_COMPARE_STATE_NEED_COMPARE)) { |
| if ((memcmp(skb->data, READ_ADDRESS_EVENT, sizeof(READ_ADDRESS_EVENT)) == 0) && (buf_len == 12)) { |
| for (i = 0; i < BD_ADDRESS_SIZE; i++) |
| g_card->bdaddr[i] = skb->data[6 + i]; |
| |
| pr_info("%s: GET TV BDADDR = %02X:%02X:%02X:%02X:%02X:%02X", __func__, |
| g_card->bdaddr[0], g_card->bdaddr[1], g_card->bdaddr[2], |
| g_card->bdaddr[3], g_card->bdaddr[4], g_card->bdaddr[5]); |
| |
| //event_compare_status = BTMTK_SDIO_EVENT_COMPARE_STATE_COMPARE_SUCCESS; |
| } else |
| pr_info("%s READ_ADDRESS_EVENT compare fail buf_len %d\n", __func__, buf_len); |
| } |
| |
| lock_unsleepable_lock(&(metabuffer.spin_lock)); |
| if ((!fw_is_doing_coredump) & |
| (!fw_is_coredump_end_packet)) { |
| if (event_compare_status == BTMTK_SDIO_EVENT_COMPARE_STATE_NEED_COMPARE) { |
| /*compare with tx hci cmd*/ |
| if (buf_len >= event_need_compare_len) { |
| if (memcmp(skb->data, event_need_compare, event_need_compare_len) == 0) { |
| event_compare_status = BTMTK_SDIO_EVENT_COMPARE_STATE_COMPARE_SUCCESS; |
| pr_info("%s compare success\n", __func__); |
| } else { |
| pr_debug("%s compare fail\n", __func__); |
| BTSDIO_DEBUG_RAW(event_need_compare, event_need_compare_len, |
| "%s: event_need_compare :", __func__); |
| } |
| } |
| } |
| |
| if (event_add_spec_header_status) { |
| /*compare with tx hci cmd*/ |
| org_packet_len = buf_len; |
| buf_len += sizeof(spec_header); |
| fops_skb = bt_skb_alloc(buf_len, GFP_ATOMIC); |
| bt_cb(fops_skb)->pkt_type = HCI_EVENT_PKT; |
| memcpy(fops_skb->data, spec_header, sizeof(spec_header)); |
| memcpy(fops_skb->data + sizeof(spec_header), skb->data, buf_len); |
| } else { |
| org_packet_len = buf_len; |
| fops_skb = bt_skb_alloc(buf_len, GFP_ATOMIC); |
| bt_cb(fops_skb)->pkt_type = type; |
| memcpy(fops_skb->data, skb->data, buf_len); |
| } |
| |
| fops_skb->len = buf_len; |
| skb_queue_tail(&g_priv->adapter->fops_queue, fops_skb); |
| if (skb_queue_empty(&g_priv->adapter->fops_queue)) |
| pr_info("%s fops_queue is empty\n", __func__); |
| |
| kfree_skb(skb); |
| unlock_unsleepable_lock(&(metabuffer.spin_lock)); |
| wake_up_interruptible(&inq); |
| goto exit; |
| } |
| unlock_unsleepable_lock(&(metabuffer.spin_lock)); |
| |
| exit: |
| if (ret) { |
| pr_debug("%s fail free skb\n", __func__); |
| kfree_skb(skb); |
| } |
| |
| buf_len += 1; |
| if (buf_len % 4) |
| fourbalignment_len = buf_len + 4 - (buf_len % 4); |
| else |
| fourbalignment_len = buf_len; |
| |
| rx_length -= fourbalignment_len; |
| |
| if (rx_length > (MTK_SDIO_PACKET_HEADER_SIZE)) { |
| memcpy(&rxbuf[MTK_SDIO_PACKET_HEADER_SIZE], |
| &rxbuf[MTK_SDIO_PACKET_HEADER_SIZE+fourbalignment_len], |
| rx_length-MTK_SDIO_PACKET_HEADER_SIZE); |
| } |
| |
| pr_debug("%s ret %d, rx_length, %d,fourbalignment_len %d <--\n", |
| __func__, ret, rx_length, fourbalignment_len); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_process_int_status( |
| struct btmtk_private *priv) |
| { |
| int ret = 0; |
| u32 u32rxdatacount = 0; |
| u32 u32ReadCRValue = 0; |
| |
| ret = btmtk_sdio_readl(CHISR, &u32ReadCRValue); |
| pr_debug("%s check TX_EMPTY CHISR 0x%08x\n", __func__, u32ReadCRValue); |
| if (TX_EMPTY&u32ReadCRValue) { |
| ret = btmtk_sdio_writel(CHISR, (TX_EMPTY | TX_COMPLETE_COUNT)); |
| priv->btmtk_dev.tx_dnld_rdy = true; |
| pr_debug("%s set tx_dnld_rdy 1\n", __func__); |
| } |
| |
| if (RX_DONE&u32ReadCRValue) |
| ret = btmtk_sdio_recv_rx_data(); |
| |
| if (ret == 0) { |
| lock_unsleepable_lock(&event_compare_status_lock); |
| while (rx_length > (MTK_SDIO_PACKET_HEADER_SIZE)) { |
| btmtk_sdio_card_to_host(priv, NULL, -1, 0); |
| u32rxdatacount++; |
| pr_debug("%s u32rxdatacount %d\n", |
| __func__, u32rxdatacount); |
| } |
| unlock_unsleepable_lock(&event_compare_status_lock); |
| } |
| |
| btmtk_sdio_enable_interrupt(1); |
| |
| return 0; |
| } |
| |
| static void btmtk_sdio_interrupt(struct sdio_func *func) |
| { |
| struct btmtk_private *priv; |
| struct btmtk_sdio_card *card; |
| |
| card = sdio_get_drvdata(func); |
| |
| if (!card) |
| return; |
| |
| |
| if (!card->priv) |
| return; |
| |
| priv = card->priv; |
| btmtk_sdio_enable_interrupt(0); |
| |
| btmtk_interrupt(priv); |
| } |
| |
| static int btmtk_sdio_register_dev(struct btmtk_sdio_card *card) |
| { |
| struct sdio_func *func; |
| u32 u32ReadCRValue = 0; |
| u8 reg; |
| int ret = 0; |
| |
| if (!card || !card->func) { |
| pr_err("Error: card or function is NULL!\n"); |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| func = card->func; |
| |
| sdio_claim_host(func); |
| |
| ret = sdio_enable_func(func); |
| if (ret) { |
| pr_err("sdio_enable_func() failed: ret=%d\n", ret); |
| ret = -EIO; |
| goto release_host; |
| } |
| |
| btmtk_sdio_readb(SDIO_CCCR_IENx, &u32ReadCRValue); |
| pr_info("before claim irq read SDIO_CCCR_IENx %x, func num %d\n", |
| u32ReadCRValue, func->num); |
| |
| ret = sdio_claim_irq(func, btmtk_sdio_interrupt); |
| if (ret) { |
| pr_err("sdio_claim_irq failed: ret=%d\n", ret); |
| ret = -EIO; |
| goto disable_func; |
| } |
| pr_info("sdio_claim_irq success: ret=%d\n", ret); |
| |
| btmtk_sdio_readb(SDIO_CCCR_IENx, &u32ReadCRValue); |
| pr_info("after claim irq read SDIO_CCCR_IENx %x\n", u32ReadCRValue); |
| |
| ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE); |
| if (ret) { |
| pr_err("cannot set SDIO block size\n"); |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| reg = sdio_readb(func, card->reg->io_port_0, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport = reg; |
| |
| reg = sdio_readb(func, card->reg->io_port_1, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport |= (reg << 8); |
| |
| reg = sdio_readb(func, card->reg->io_port_2, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| card->ioport |= (reg << 16); |
| |
| pr_info("SDIO FUNC%d IO port: 0x%x\n", func->num, card->ioport); |
| |
| if (card->reg->int_read_to_clear) { |
| reg = sdio_readb(func, card->reg->host_int_rsr, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| sdio_writeb(func, reg | 0x3f, card->reg->host_int_rsr, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| |
| reg = sdio_readb(func, card->reg->card_misc_cfg, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| sdio_writeb(func, reg | 0x10, card->reg->card_misc_cfg, &ret); |
| if (ret < 0) { |
| ret = -EIO; |
| goto release_irq; |
| } |
| } |
| |
| sdio_set_drvdata(func, card); |
| |
| sdio_release_host(func); |
| |
| return 0; |
| |
| release_irq: |
| sdio_release_irq(func); |
| |
| disable_func: |
| sdio_disable_func(func); |
| |
| release_host: |
| sdio_release_host(func); |
| |
| failed: |
| pr_info("%s fail\n", __func__); |
| return ret; |
| } |
| |
| static int btmtk_sdio_unregister_dev(struct btmtk_sdio_card *card) |
| { |
| if (card && card->func) { |
| sdio_claim_host(card->func); |
| sdio_release_irq(card->func); |
| sdio_disable_func(card->func); |
| sdio_release_host(card->func); |
| sdio_set_drvdata(card->func, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int btmtk_sdio_enable_host_int(struct btmtk_sdio_card *card) |
| { |
| int ret; |
| u32 read_data = 0; |
| |
| if (!card || !card->func) |
| return -EINVAL; |
| |
| sdio_claim_host(card->func); |
| |
| ret = btmtk_sdio_enable_host_int_mask(card, HIM_ENABLE); |
| |
| btmtk_sdio_get_rx_unit(card); |
| |
| if (0) { |
| typedef int (*fp_sdio_hook)(struct mmc_host *host, |
| unsigned int width); |
| fp_sdio_hook func_sdio_hook = |
| (fp_sdio_hook)kallsyms_lookup_name("mmc_set_bus_width"); |
| unsigned char data = 0; |
| |
| data = sdio_f0_readb(card->func, SDIO_CCCR_IF, &ret); |
| if (ret) |
| pr_info("%s sdio_f0_readb ret %d\n", __func__, ret); |
| |
| pr_info("%s sdio_f0_readb data 0x%X!\n", __func__, data); |
| |
| data &= ~SDIO_BUS_WIDTH_MASK; |
| data |= SDIO_BUS_ASYNC_INT; |
| card->func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| |
| sdio_f0_writeb(card->func, data, SDIO_CCCR_IF, &ret); |
| if (ret) |
| pr_info("%s sdio_f0_writeb ret %d\n", __func__, ret); |
| |
| pr_info("%s func_sdio_hook at 0x%p!\n", |
| __func__, func_sdio_hook); |
| if (func_sdio_hook) |
| func_sdio_hook(card->func->card->host, MMC_BUS_WIDTH_1); |
| |
| data = sdio_f0_readb(card->func, SDIO_CCCR_IF, &ret); |
| if (ret) |
| pr_info("%s sdio_f0_readb 2 ret %d\n", |
| __func__, ret); |
| |
| pr_info("%s sdio_f0_readb2 data 0x%X\n", __func__, data); |
| } |
| |
| sdio_release_host(card->func); |
| |
| /* workaround for some platform no host clock sometimes */ |
| |
| btmtk_sdio_readl(CSDIOCSR, &read_data); |
| pr_info("%s read CSDIOCSR is 0x%X\n", __func__, read_data); |
| read_data |= 0x4; |
| btmtk_sdio_writel(CSDIOCSR, read_data); |
| pr_info("%s write CSDIOCSR is 0x%X\n", __func__, read_data); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_disable_host_int(struct btmtk_sdio_card *card) |
| { |
| int ret; |
| |
| if (!card || !card->func) |
| return -EINVAL; |
| |
| sdio_claim_host(card->func); |
| |
| ret = btmtk_sdio_disable_host_int_mask(card, HIM_DISABLE); |
| |
| sdio_release_host(card->func); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_download_fw(struct btmtk_sdio_card *card) |
| { |
| int ret; |
| |
| pr_info("%s begin\n", __func__); |
| if (!card || !card->func) { |
| pr_err("card or function is NULL!\n"); |
| return -EINVAL; |
| } |
| |
| sdio_claim_host(card->func); |
| |
| if (btmtk_sdio_download_rom_patch(card)) { |
| pr_err("Failed to download firmware!\n"); |
| ret = -EIO; |
| goto done; |
| } |
| |
| /* |
| * winner or not, with this test the FW synchronizes |
| * when the |
| * module can continue its initialization |
| */ |
| sdio_release_host(card->func); |
| |
| return 0; |
| done: |
| sdio_release_host(card->func); |
| return ret; |
| } |
| |
| static int btmtk_sdio_push_data_to_metabuffer( |
| char *data, |
| int len, |
| u8 type) |
| { |
| int remainLen = 0; |
| |
| if (metabuffer.write_p >= metabuffer.read_p) |
| remainLen = metabuffer.write_p - metabuffer.read_p; |
| else |
| remainLen = META_BUFFER_SIZE - |
| (metabuffer.read_p - metabuffer.write_p); |
| |
| if ((remainLen + 1 + len) >= META_BUFFER_SIZE) { |
| pr_warn("%s copy copyLen %d > META_BUFFER_SIZE(%d), push back to queue\n", |
| __func__, |
| (remainLen + 1 + len), |
| META_BUFFER_SIZE); |
| return -1; |
| } |
| |
| metabuffer.buffer[metabuffer.write_p] = type; |
| metabuffer.write_p++; |
| if (metabuffer.write_p >= META_BUFFER_SIZE) |
| metabuffer.write_p = 0; |
| |
| if (metabuffer.write_p + len <= META_BUFFER_SIZE) |
| memcpy(&metabuffer.buffer[metabuffer.write_p], |
| data, |
| len); |
| else { |
| memcpy(&metabuffer.buffer[metabuffer.write_p], |
| data, |
| META_BUFFER_SIZE - metabuffer.write_p); |
| memcpy(metabuffer.buffer, |
| &data[META_BUFFER_SIZE - metabuffer.write_p], |
| len - (META_BUFFER_SIZE - metabuffer.write_p)); |
| } |
| |
| metabuffer.write_p += len; |
| if (metabuffer.write_p >= META_BUFFER_SIZE) |
| metabuffer.write_p -= META_BUFFER_SIZE; |
| |
| remainLen += (1 + len); |
| return 0; |
| } |
| |
| static int btmtk_sdio_pull_data_from_metabuffer( |
| char __user *buf, |
| size_t count) |
| { |
| int copyLen = 0; |
| unsigned long ret = 0; |
| |
| if (metabuffer.write_p >= metabuffer.read_p) |
| copyLen = metabuffer.write_p - metabuffer.read_p; |
| else |
| copyLen = META_BUFFER_SIZE - |
| (metabuffer.read_p - metabuffer.write_p); |
| |
| if (copyLen > count) |
| copyLen = count; |
| |
| if (metabuffer.read_p + copyLen <= META_BUFFER_SIZE) |
| ret = copy_to_user(buf, |
| &metabuffer.buffer[metabuffer.read_p], |
| copyLen); |
| else { |
| ret = copy_to_user(buf, |
| &metabuffer.buffer[metabuffer.read_p], |
| META_BUFFER_SIZE - metabuffer.read_p); |
| if (!ret) |
| ret = copy_to_user( |
| &buf[META_BUFFER_SIZE - metabuffer.read_p], |
| metabuffer.buffer, |
| copyLen - (META_BUFFER_SIZE-metabuffer.read_p)); |
| } |
| |
| if (ret) |
| pr_warn("%s copy to user fail, ret %d\n", __func__, (int)ret); |
| |
| metabuffer.read_p += (copyLen - ret); |
| if (metabuffer.read_p >= META_BUFFER_SIZE) |
| metabuffer.read_p -= META_BUFFER_SIZE; |
| |
| return (copyLen - ret); |
| } |
| |
| static int btmtk_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| int ret = 0; |
| struct btmtk_private *priv = NULL; |
| struct btmtk_sdio_card *card = NULL; |
| struct btmtk_sdio_device *data = (void *) id->driver_data; |
| u32 u32ReadCRValue = 0; |
| |
| probe_counter++; |
| pr_info("%s Mediatek Bluetooth driver Version=%s\n", |
| __func__, VERSION); |
| pr_info("vendor=0x%x, device=0x%x, class=%d, fn=%d, support func_num %d\n", |
| id->vendor, id->device, id->class, |
| func->num, data->reg->func_num); |
| |
| if (func->num != data->reg->func_num) { |
| pr_info("func num is not match\n"); |
| return -ENODEV; |
| } |
| |
| card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL); |
| if (!card) |
| return -ENOMEM; |
| |
| card->func = func; |
| g_card = card; |
| |
| if (id->driver_data) { |
| card->helper = data->helper; |
| card->firmware = data->firmware; |
| card->firmware1 = data->firmware1; |
| card->reg = data->reg; |
| card->sd_blksz_fw_dl = data->sd_blksz_fw_dl; |
| card->support_pscan_win_report = data->support_pscan_win_report; |
| card->supports_fw_dump = data->supports_fw_dump; |
| card->chip_id = data->reg->chip_id; |
| card->suspend_count = 0; |
| pr_info("%s chip_id is %x\n", __func__, data->reg->chip_id); |
| /*allocate memory for woble_setting_file*/ |
| g_card->woble_setting_file_name = kzalloc(MAX_BIN_FILE_NAME_LEN, GFP_KERNEL); |
| if (!g_card->woble_setting_file_name) |
| return -1; |
| |
| memcpy(g_card->woble_setting_file_name, |
| WOBLE_SETTING_FILE_NAME, |
| sizeof(WOBLE_SETTING_FILE_NAME)); |
| } |
| |
| pr_debug("%s func device %X\n", __func__, card->func->device); |
| pr_debug("%s Call btmtk_sdio_register_dev\n", __func__); |
| if (btmtk_sdio_register_dev(card) < 0) { |
| pr_err("Failed to register BT device!\n"); |
| return -ENODEV; |
| } |
| |
| pr_debug("%s btmtk_sdio_register_dev success\n", __func__); |
| |
| /* Disable the interrupts on the card */ |
| btmtk_sdio_enable_host_int(card); |
| pr_debug("call btmtk_sdio_enable_host_int done\n"); |
| if (btmtk_sdio_download_fw(card)) { |
| pr_err("Downloading firmware failed!\n"); |
| ret = -ENODEV; |
| goto unreg_dev; |
| } |
| |
| btmtk_sdio_set_i2s(); |
| /* Move from btmtk_fops_open() */ |
| spin_lock_init(&(metabuffer.spin_lock.lock)); |
| spin_lock_init(&(event_compare_status_lock.lock)); |
| spin_lock_init(&(tx_function_lock.lock)); |
| pr_debug("%s spin_lock_init end\n", __func__); |
| |
| priv = btmtk_add_card(card); |
| if (!priv) { |
| pr_err("Initializing card failed!\n"); |
| ret = -ENODEV; |
| goto unreg_dev; |
| } |
| pr_debug("btmtk_add_card success\n"); |
| card->priv = priv; |
| pr_debug("assign priv done\n"); |
| /* Initialize the interface specific function pointers */ |
| priv->hw_host_to_card = btmtk_sdio_host_to_card; |
| priv->hw_process_int_status = btmtk_sdio_process_int_status; |
| priv->hw_set_own_back = btmtk_sdio_set_own_back; |
| |
| g_priv = priv; |
| if (!fw_dump_ptr) |
| fw_dump_ptr = kmalloc(FW_DUMP_BUF_SIZE, GFP_ATOMIC); |
| |
| if (!fw_dump_ptr) { |
| ret = -ENODEV; |
| return ret; |
| } |
| |
| memset(&metabuffer.buffer, 0, META_BUFFER_SIZE); |
| memset(fw_dump_ptr, 0, FW_DUMP_BUF_SIZE); |
| |
| fw_dump_task_should_stop = 0; |
| #if SAVE_FW_DUMP_IN_KERNEL |
| fw_dump_file = NULL; |
| #endif |
| fw_dump_read_ptr = fw_dump_ptr; |
| fw_dump_write_ptr = fw_dump_ptr; |
| fw_dump_total_read_size = 0; |
| fw_dump_total_write_size = 0; |
| fw_dump_buffer_used_size = 0; |
| fw_dump_buffer_full = 0; |
| |
| ret = btmtk_sdio_readl(CHLPCR, &u32ReadCRValue); |
| pr_debug("%s read CHLPCR (0x%08X)\n", __func__, u32ReadCRValue); |
| pr_debug("%s chipid is (0x%X)\n", __func__, g_card->chip_id); |
| if (is_support_unify_woble(g_card)) { |
| memset(g_card->bdaddr, 0, BD_ADDRESS_SIZE); |
| btmtk_sdio_load_woble_setting(g_card->woble_setting, |
| g_card->woble_setting_file_name, |
| &g_card->func->dev, |
| &g_card->woble_setting_len, |
| g_card); |
| } |
| |
| pr_info("%s normal end\n", __func__); |
| probe_ready = true; |
| return 0; |
| |
| unreg_dev: |
| btmtk_sdio_unregister_dev(card); |
| |
| pr_err("%s fail end\n", __func__); |
| return ret; |
| } |
| |
| static void btmtk_sdio_remove(struct sdio_func *func) |
| { |
| struct btmtk_sdio_card *card; |
| |
| pr_info("%s begin user_rmmod %d\n", __func__, user_rmmod); |
| probe_ready = false; |
| |
| if (func) { |
| card = sdio_get_drvdata(func); |
| if (card) { |
| /* Send SHUTDOWN command & disable interrupt |
| * if user removes the module. |
| */ |
| if (user_rmmod) { |
| pr_info("%s begin user_rmmod %d in user mode\n", |
| __func__, user_rmmod); |
| btmtk_sdio_set_own_back(DRIVER_OWN); |
| btmtk_sdio_enable_interrupt(0); |
| btmtk_sdio_bt_set_power(0); |
| btmtk_sdio_set_own_back(FW_OWN); |
| |
| btmtk_sdio_disable_host_int(card); |
| } |
| btmtk_sdio_woble_free_setting(); |
| pr_debug("unregester dev\n"); |
| card->priv->surprise_removed = true; |
| btmtk_sdio_unregister_dev(card); |
| btmtk_remove_card(card->priv); |
| need_reset_stack = 1; |
| } |
| } |
| pr_info("%s end\n", __func__); |
| } |
| |
| /* |
| * cmd_type: |
| * #define HCI_COMMAND_PKT 0x01 |
| * #define HCI_ACLDATA_PKT 0x02 |
| * #define HCI_SCODATA_PKT 0x03 |
| * #define HCI_EVENT_PKT 0x04 |
| * #define HCI_VENDOR_PKT 0xff |
| */ |
| static int btmtk_sdio_send_hci_cmd(u8 cmd_type, u8 *cmd, int cmd_len, |
| const u8 *event, const int event_len, |
| int total_timeout, int add_spec_header, bool wait_until) |
| /*cmd: if cmd is null, don't compare event, just return 0 if send cmd success*/ |
| /* total_timeout: -1 */ |
| /* add_spec_header:0 hci event, 1 use vend specic event header*/ |
| /* return 0 if compare successfully and no need to compare */ |
| /* return < 0 if error*/ |
| /*wait_until: 0:need compare with first event after cmd*/ |
| /*return value: 0 or positive success, -x fail*/ |
| { |
| int ret = -1; |
| unsigned long comp_event_timo = 0, start_time = 0; |
| struct sk_buff *skb = NULL; |
| |
| if (cmd_len == 0) { |
| pr_err("%s cmd_len (%d) error return\n", __func__, cmd_len); |
| return -EINVAL; |
| } |
| |
| |
| skb = bt_skb_alloc(cmd_len, GFP_ATOMIC); |
| bt_cb(skb)->pkt_type = cmd_type; |
| memcpy(&skb->data[0], cmd, cmd_len); |
| skb->len = cmd_len; |
| skb_queue_tail(&g_priv->adapter->tx_queue, skb); |
| wake_up_interruptible(&g_priv->main_thread.wait_q); |
| |
| |
| if (event == NULL) |
| return 0; |
| |
| if (event_len > EVENT_COMPARE_SIZE) { |
| pr_err("%s event_len (%d) > EVENT_COMPARE_SIZE(%d), error\n", __func__, event_len, EVENT_COMPARE_SIZE); |
| return -1; |
| } |
| |
| memcpy(event_need_compare, event, event_len); |
| event_need_compare_len = event_len; |
| |
| start_time = jiffies; |
| // check HCI event |
| event_add_spec_header_status = add_spec_header; |
| comp_event_timo = jiffies + msecs_to_jiffies(total_timeout); |
| ret = -1; |
| event_compare_status = BTMTK_SDIO_EVENT_COMPARE_STATE_NEED_COMPARE; |
| |
| pr_info("%s event_need_compare_len %d\n", __func__, event_need_compare_len); |
| do { |
| //check if event_compare_success |
| if (event_compare_status == BTMTK_SDIO_EVENT_COMPARE_STATE_COMPARE_SUCCESS) { |
| pr_info("%s compare success\n", __func__); |
| ret = 0; |
| break; |
| } |
| |
| msleep(100); |
| } while (time_before(jiffies, comp_event_timo)); |
| event_compare_status = BTMTK_SDIO_EVENT_COMPARE_STATE_NOTHING_NEED_COMPARE; |
| event_add_spec_header_status = 0; |
| pr_info("%s ret %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int btmtk_sdio_send_get_vendor_cap(void) |
| { |
| int ret = -1; |
| u8 get_vendor_cap_cmd[] = { 0x53, 0xFD, 0x00 }; |
| u8 get_vendor_cap_event[] = { 0x0e, 0x12, 0x01, 0x53, 0xFD, 0x00}; |
| |
| pr_info("%s: begin", __func__); |
| BTSDIO_INFO_RAW(get_vendor_cap_cmd, sizeof(get_vendor_cap_cmd), "%s: send vendor_cap_cmd is:", __func__); |
| ret = btmtk_sdio_send_hci_cmd(HCI_COMMAND_PKT, get_vendor_cap_cmd, sizeof(get_vendor_cap_cmd), |
| get_vendor_cap_event, sizeof(get_vendor_cap_event), |
| WOBLE_COMP_EVENT_TIMO, 1, 1); |
| |
| pr_info("%s: ret %d", __func__, ret); |
| return ret; |
| } |
| |
| static int btmtk_sdio_send_read_BDADDR_cmd(void) |
| { |
| u8 cmd[] = { 0x09, 0x10, 0x00 }; |
| int ret = -1; |
| unsigned char zero[BD_ADDRESS_SIZE]; |
| |
| pr_info("%s: begin", __func__); |
| if (g_card == NULL) { |
| pr_err("%s: g_card == NULL!", __func__); |
| return -1; |
| } |
| |
| memset(zero, 0, sizeof(zero)); |
| if (memcmp(g_card->bdaddr, zero, BD_ADDRESS_SIZE) != 0) { |
| pr_info("%s: already got bdaddr %02x%02x%02x%02x%02x%02x, return 0", __func__, |
| g_card->bdaddr[0], g_card->bdaddr[1], g_card->bdaddr[2], |
| g_card->bdaddr[3], g_card->bdaddr[4], g_card->bdaddr[5]); |
| return 0; |
| } |
| BTSDIO_INFO_RAW(cmd, sizeof(cmd), "%s: send read bd address cmd is:", __func__); |
| ret = btmtk_sdio_send_hci_cmd(HCI_COMMAND_PKT, cmd, sizeof(cmd), |
| READ_ADDRESS_EVENT, sizeof(READ_ADDRESS_EVENT), WOBLE_COMP_EVENT_TIMO, 1, 1); |
| /*BD address will get in btmtk_sdio_host_to_card*/ |
| pr_info("%s: ret = %d", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int btmtk_sdio_set_Woble_APCF_filter_parameter(void) |
| { |
| int ret = -1; |
| u8 cmd[] = { 0x57, 0xfd, 0x0a, 0x01, 0x00, 0x5a, 0x20, 0x00, 0x20, 0x00, 0x01, 0x80, 0x00 }; |
| u8 event_complete[] = { 0x0e, 0x07, 0x01, 0x57, 0xfd, 0x00, 0x01/*, 00, 63*/ }; |
| |
| pr_info("%s: begin", __func__); |
| ret = btmtk_sdio_send_hci_cmd(HCI_COMMAND_PKT, cmd, sizeof(cmd), |
| event_complete, sizeof(event_complete), |
| WOBLE_COMP_EVENT_TIMO, 1, 1); |
| if (ret < 0) |
| pr_err("%s: end ret %d", __func__, ret); |
| else |
| ret = 0; |
| |
| pr_info("%s: end ret=%d", __func__, ret); |
| return ret; |
| } |
| |
| |
| /** |
| * Set APCF manufacturer data and filter parameter |
| */ |
| static int btmtk_sdio_set_Woble_APCF(void) |
| { |
| int ret = -1; |
| int i = 0; |
| u8 manufactur_data[] = { 0x57, 0xfd, 0x27, 0x06, 0x00, 0x5a, |
| 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x43, 0x52, 0x4B, 0x54, 0x4D, |
| 0xFF, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, |
| 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| u8 event_complete[] = { 0x0e, 0x07,
|