/*
 * Copyright (c) 2013-2016 ARM Limited. All rights reserved.
 * Copyright (c) 2016, Freescale Semiconductor, Inc. Not a Contribution.
 * Copyright 2016-2017 NXP. Not a Contribution.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "fsl_i2c_cmsis.h"

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.ii2c_cmsis"
#endif

#if ((RTE_I2C0 && defined(I2C0)) || (RTE_I2C1 && defined(I2C1)) || (RTE_I2C2 && defined(I2C2)) || \
     (RTE_I2C3 && defined(I2C3)) || (RTE_I2C4 && defined(I2C4)))

#define ARM_I2C_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 1)

/*
 * ARMCC does not support split the data section automatically, so the driver
 * needs to split the data to separate sections explicitly, to reduce codesize.
 */
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
#define ARMCC_SECTION(section_name) __attribute__((section(section_name)))
#endif

typedef const struct _cmsis_i2c_resource
{
    I2C_Type *base;            /*!< I2C peripheral base address.      */
    uint32_t (*GetFreq)(void); /*!< Function to get the clock frequency. */

} cmsis_i2c_resource_t;

typedef union _cmsis_i2c_handle
{
    i2c_master_handle_t master_handle; /*!< master Interupt transfer handle. */
    i2c_slave_handle_t slave_handle;   /*!< slave Interupt transfer handle. */
} cmsis_i2c_handle_t;

typedef struct _cmsis_i2c_interrupt_driver_state
{
    cmsis_i2c_resource_t *resource; /*!< Basic I2C resource. */
    cmsis_i2c_handle_t *handle;
    ARM_I2C_SignalEvent_t cb_event; /*!< Callback function.     */
    uint8_t flags;                  /*!< Control and state flags. */
} cmsis_i2c_interrupt_driver_state_t;

static const ARM_DRIVER_VERSION s_i2cDriverVersion        = {ARM_I2C_API_VERSION, ARM_I2C_DRV_VERSION};
static const ARM_I2C_CAPABILITIES s_i2cDriverCapabilities = {
    0, /*< supports 10-bit addressing */
};

extern uint32_t I2C_GetInstance(I2C_Type *base);

static ARM_DRIVER_VERSION I2Cx_GetVersion(void)
{
    return s_i2cDriverVersion;
}

static ARM_I2C_CAPABILITIES I2Cx_GetCapabilities(void)
{
    return s_i2cDriverCapabilities;
}

#endif

#if ((RTE_I2C0 && !RTE_I2C0_DMA_EN) || (RTE_I2C1 && !RTE_I2C1_DMA_EN) || (RTE_I2C2 && !RTE_I2C2_DMA_EN) || \
     (RTE_I2C3 && !RTE_I2C3_DMA_EN) || (RTE_I2C4 && !RTE_I2C4_DMA_EN))

static void KSDK_I2C_SLAVE_InterruptCallback(I2C_Type *base, i2c_slave_transfer_t *xfer, void *userData)
{
    uint32_t event;

    switch (xfer->event)
    {
        case kI2C_SlaveCompletionEvent: /* Occurs after Slave Transmit/Receive operation has finished. */
            event = ARM_I2C_EVENT_TRANSFER_DONE;
            break;

        default:
            event = ARM_I2C_EVENT_TRANSFER_INCOMPLETE;
            break;
    }

    if (userData)
    {
        ((ARM_I2C_SignalEvent_t)userData)(event);
    }
}

static void KSDK_I2C_MASTER_InterruptCallback(I2C_Type *base,
                                              i2c_master_handle_t *handle,
                                              status_t status,
                                              void *userData)
{
    uint32_t event;

    switch (status)
    {
        case kStatus_Success: /* Occurs after Master Transmit/Receive operation has finished. */
            event = ARM_I2C_EVENT_TRANSFER_DONE;
            break;

        case kStatus_I2C_Addr_Nak: /* Occurs in master mode when address is not acknowledged from slave.*/
            event = ARM_I2C_EVENT_ADDRESS_NACK;
            break;

        case kStatus_I2C_ArbitrationLost: /* Occurs in master mode when arbitration is lost.*/
            event = ARM_I2C_EVENT_ARBITRATION_LOST;
            break;

        default:
            event = ARM_I2C_EVENT_TRANSFER_INCOMPLETE;
            break;
    }

    /* User data is actually CMSIS driver callback. */
    if (userData)
    {
        ((ARM_I2C_SignalEvent_t)userData)(event);
    }
}

static int32_t I2C_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    if (!(i2c->flags & I2C_FLAG_INIT))
    {
        i2c->cb_event = cb_event; /* cb_event is CMSIS driver callback. */
        i2c->flags    = I2C_FLAG_INIT;
    }

    return ARM_DRIVER_OK;
}

static int32_t I2C_InterruptUninitialize(cmsis_i2c_interrupt_driver_state_t *i2c)
{
    i2c->flags = I2C_FLAG_UNINIT;
    return ARM_DRIVER_OK;
}

int32_t I2C_Master_InterruptTransmit(
    uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    int32_t status;
    int32_t ret;
    i2c_master_transfer_t masterXfer;

    /* Check if the I2C bus is idle - if not return busy status. */
    if (i2c->handle->master_handle.state != 0)
    {
        return ARM_DRIVER_ERROR_BUSY;
    }

    /* Create master_handle */
    I2C_MasterTransferCreateHandle(i2c->resource->base, &(i2c->handle->master_handle),
                                   KSDK_I2C_MASTER_InterruptCallback, (void *)i2c->cb_event);

    masterXfer.slaveAddress   = addr;                     /*7-bit slave address.*/
    masterXfer.direction      = kI2C_Write;               /* Transfer direction.*/
    masterXfer.subaddress     = (uint32_t)NULL;           /* Sub address */
    masterXfer.subaddressSize = 0;                        /* Size of command buffer.*/
    masterXfer.data           = (uint8_t *)data;          /* Transfer buffer.*/
    masterXfer.dataSize       = num;                      /* Transfer size.*/
    masterXfer.flags          = kI2C_TransferDefaultFlag; /* Transfer flag which controls the transfer.*/

    if (i2c->resource->base->I2SR & 0x20)
    {
        masterXfer.flags |= kI2C_TransferRepeatedStartFlag;
    }

    if (xfer_pending)
    {
        masterXfer.flags |= kI2C_TransferNoStopFlag;
    }

    status = I2C_MasterTransferNonBlocking(i2c->resource->base, &(i2c->handle->master_handle), &masterXfer);

    switch (status)
    {
        case kStatus_Success:
            ret = ARM_DRIVER_OK;
            break;

        case kStatus_I2C_Busy:
            ret = ARM_DRIVER_ERROR_BUSY;
            break;

        case kStatus_I2C_Timeout:
            ret = ARM_DRIVER_ERROR_TIMEOUT;
            break;

        default:
            ret = ARM_DRIVER_ERROR;
            break;
    }

    return ret;
}

int32_t I2C_Master_InterruptReceive(
    uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    int32_t status;
    int32_t ret;
    i2c_master_transfer_t masterXfer;

    /* Check if the I2C bus is idle - if not return busy status. */
    if (i2c->handle->master_handle.state != 0)
    {
        return ARM_DRIVER_ERROR_BUSY;
    }

    /* Create master_handle */
    I2C_MasterTransferCreateHandle(i2c->resource->base, &(i2c->handle->master_handle),
                                   KSDK_I2C_MASTER_InterruptCallback, (void *)i2c->cb_event);

    masterXfer.slaveAddress   = addr;                     /*7-bit slave address.*/
    masterXfer.direction      = kI2C_Read;                /* Transfer direction.*/
    masterXfer.subaddress     = (uint32_t)NULL;           /* Sub address */
    masterXfer.subaddressSize = 0;                        /* Size of command buffer.*/
    masterXfer.data           = data;                     /* Transfer buffer.*/
    masterXfer.dataSize       = num;                      /* Transfer size.*/
    masterXfer.flags          = kI2C_TransferDefaultFlag; /* Transfer flag which controls the transfer.*/

    if (i2c->resource->base->I2SR & 0x20)
    {
        masterXfer.flags |= kI2C_TransferRepeatedStartFlag;
    }

    if (xfer_pending)
    {
        masterXfer.flags |= kI2C_TransferNoStopFlag;
    }

    status = I2C_MasterTransferNonBlocking(i2c->resource->base, &(i2c->handle->master_handle), &masterXfer);

    switch (status)
    {
        case kStatus_Success:
            ret = ARM_DRIVER_OK;
            break;

        case kStatus_I2C_Busy:
            ret = ARM_DRIVER_ERROR_BUSY;
            break;

        case kStatus_I2C_Timeout:
            ret = ARM_DRIVER_ERROR_TIMEOUT;
            break;

        default:
            ret = ARM_DRIVER_ERROR;
            break;
    }

    return ret;
}

int32_t I2C_Slave_InterruptTransmit(const uint8_t *data, uint32_t num, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    int32_t status;
    int32_t ret;

    /* Create slave_handle */
    I2C_SlaveTransferCreateHandle(i2c->resource->base, &(i2c->handle->slave_handle), KSDK_I2C_SLAVE_InterruptCallback,
                                  (void *)i2c->cb_event);

    status = I2C_SlaveTransferNonBlocking(i2c->resource->base, &(i2c->handle->slave_handle), kI2C_SlaveCompletionEvent);

    i2c->handle->slave_handle.transfer.data =
        (uint8_t *)data;                               /* Pointer to buffer with data to transmit to I2C Master */
    i2c->handle->slave_handle.transfer.dataSize = num; /* Number of data bytes to transmit */
    i2c->handle->slave_handle.transfer.transferredCount =
        0; /* Number of bytes actually transferred since start or last repeated start. */

    switch (status)
    {
        case kStatus_Success:
            ret = ARM_DRIVER_OK;
            break;

        case kStatus_I2C_Busy:
            ret = ARM_DRIVER_ERROR_BUSY;
            break;

        default:
            ret = ARM_DRIVER_ERROR;
            break;
    }

    return ret;
}

int32_t I2C_Slave_InterruptReceive(uint8_t *data, uint32_t num, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    int32_t status;
    int32_t ret;

    /* Create slave_handle */
    I2C_SlaveTransferCreateHandle(i2c->resource->base, &(i2c->handle->slave_handle), KSDK_I2C_SLAVE_InterruptCallback,
                                  (void *)i2c->cb_event);

    status = I2C_SlaveTransferNonBlocking(i2c->resource->base, &(i2c->handle->slave_handle), kI2C_SlaveCompletionEvent);

    i2c->handle->slave_handle.transfer.data     = data; /* Pointer to buffer with data to transmit to I2C Master */
    i2c->handle->slave_handle.transfer.dataSize = num;  /* Number of data bytes to transmit */
    i2c->handle->slave_handle.transfer.transferredCount =
        0; /* Number of bytes actually transferred since start or last repeated start. */

    switch (status)
    {
        case kStatus_Success:
            ret = ARM_DRIVER_OK;
            break;

        case kStatus_I2C_Busy:
            ret = ARM_DRIVER_ERROR_BUSY;
            break;

        default:
            ret = ARM_DRIVER_ERROR;
            break;
    }

    return ret;
}

int32_t I2C_InterruptGetDataCount(cmsis_i2c_interrupt_driver_state_t *i2c)
{
    uint32_t cnt; /* The number of currently transferred data bytes */

    if (i2c->handle->slave_handle.transfer.transferredCount)
    {
        cnt = i2c->handle->slave_handle.transfer.transferredCount;
    }
    else
    {
        cnt = &(i2c->handle->master_handle).transferSize - &(i2c->handle->master_handle).transfer.dataSize;
    }

    return cnt;
}

int32_t I2C_InterruptControl(uint32_t control, uint32_t arg, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    uint32_t baudRate_Bps;

    switch (control)
    {
        /* Set Own Slave Address; arg = slave address */
        case ARM_I2C_OWN_ADDRESS:
            i2c->resource->base->IADR = (arg << 1U);
            return ARM_DRIVER_OK;

        /* Set Bus Speed; arg = bus speed */
        case ARM_I2C_BUS_SPEED:
            switch (arg)
            {
                case ARM_I2C_BUS_SPEED_STANDARD:
                    baudRate_Bps = 100000;
                    break;

                case ARM_I2C_BUS_SPEED_FAST:
                    baudRate_Bps = 400000;
                    break;

                case ARM_I2C_BUS_SPEED_FAST_PLUS:
                    baudRate_Bps = 1000000;
                    break;

                default:
                    return ARM_DRIVER_ERROR_UNSUPPORTED;
            }

            I2C_MasterSetBaudRate(i2c->resource->base, baudRate_Bps, i2c->resource->GetFreq());

            return ARM_DRIVER_OK;
        /* Not supported */
        case ARM_I2C_BUS_CLEAR:
            return ARM_DRIVER_ERROR_UNSUPPORTED;

        /* Aborts the data transfer between Master and Slave for Transmit or Receive */
        case ARM_I2C_ABORT_TRANSFER:
            if (!i2c->resource->base->IADR)
            {
                /* Disable master interrupt and send STOP signal */
                I2C_MasterTransferAbort(i2c->resource->base, &(i2c->handle->master_handle));

                i2c->handle->master_handle.transferSize      = 0;
                i2c->handle->master_handle.transfer.data     = NULL;
                i2c->handle->master_handle.transfer.dataSize = 0;
            }
            /* If slave receive */
            else if (!(i2c->resource->base->I2SR & kI2C_TransferDirectionFlag))
            {
                i2c->resource->base->I2CR |= I2C_I2CR_TXAK_MASK;

                while (i2c->handle->slave_handle.state != 0)
                {
                }
                /* Disable slave interrupt */

                I2C_SlaveTransferAbort(i2c->resource->base, &(i2c->handle->slave_handle));

                i2c->handle->slave_handle.transfer.data     = NULL;
                i2c->handle->slave_handle.transfer.dataSize = 0;
            }
            return ARM_DRIVER_OK;
        default:
            return ARM_DRIVER_ERROR_UNSUPPORTED;
    }
}

static int32_t I2C_InterruptPowerControl(ARM_POWER_STATE state, cmsis_i2c_interrupt_driver_state_t *i2c)
{
    switch (state)
    {
        i2c_master_config_t masterConfig;
        i2c_slave_config_t slaveConfig;

        /* Terminates any pending data transfers, disable i2c moduole and i2c clock */
        case ARM_POWER_OFF:
            if (i2c->flags & I2C_FLAG_POWER)
            {
                I2C_InterruptControl(ARM_I2C_ABORT_TRANSFER, 0, i2c);

                I2C_MasterDeinit(i2c->resource->base);

                i2c->flags = I2C_FLAG_INIT;
            }

            return ARM_DRIVER_OK;

        /* Not supported */
        case ARM_POWER_LOW:
            return ARM_DRIVER_ERROR_UNSUPPORTED;

        /* Enable i2c moduole and i2c clock */
        case ARM_POWER_FULL:
            if (i2c->flags == I2C_FLAG_UNINIT)
            {
                return ARM_DRIVER_ERROR;
            }

            if (i2c->flags & I2C_FLAG_POWER)
            {
                /* Driver already powered */
                break;
            }

            I2C_MasterGetDefaultConfig(&masterConfig);
            I2C_MasterInit(i2c->resource->base, &masterConfig, i2c->resource->GetFreq());

            I2C_SlaveGetDefaultConfig(&slaveConfig);
            I2C_SlaveInit(i2c->resource->base, &slaveConfig);

            i2c->flags |= I2C_FLAG_POWER;

            return ARM_DRIVER_OK;

        default:
            return ARM_DRIVER_ERROR_UNSUPPORTED;
    }

    return ARM_DRIVER_OK;
}

ARM_I2C_STATUS I2C_InterruptGetStatus(cmsis_i2c_interrupt_driver_state_t *i2c)
{
    ARM_I2C_STATUS stat      = {0};
    uint32_t ksdk_i2c_status = I2C_SlaveGetStatusFlags(i2c->resource->base);
    uint32_t dataSize;

    if (!i2c->resource->base->IADR)
    {
        dataSize       = i2c->handle->master_handle.transfer.dataSize;
        stat.direction = !(!(ksdk_i2c_status & kI2C_TransferDirectionFlag)); /* Direction: 0=Transmitter, 1=Receiver.*/
        stat.mode      = 1;                                                  /* Mode: 0=Slave, 1=Master.*/
    }
    else
    {
        dataSize       = i2c->handle->slave_handle.transfer.dataSize;
        stat.direction = !(ksdk_i2c_status & kI2C_TransferDirectionFlag); /* Direction: 0=Transmitter, 1=Receiver.*/
        stat.mode      = 0;                                               /* Mode: 0=Slave, 1=Master.*/
    }

    if (dataSize != 0)
    {
        stat.busy = 1; /* Busy flag.*/
    }
    else
    {
        stat.busy = 0; /* Busy flag.*/
    }

    stat.arbitration_lost =
        !(!(ksdk_i2c_status &
            kI2C_ArbitrationLostFlag)); /* Master lost arbitration (cleared on start of next Master operation)*/

    return stat;
}

#endif

#if defined(I2C0) && RTE_I2C0
/* User needs to provide the implementation for I2C0_GetFreq/InitPins/DeinitPins
in the application for enabling according instance. */
extern uint32_t I2C0_GetFreq(void);
extern void I2C0_InitPins(void);
extern void I2C0_DeinitPins(void);

cmsis_i2c_resource_t I2C0_Resource = {I2C0, I2C0_GetFreq};

cmsis_i2c_handle_t I2C0_handle;

#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
ARMCC_SECTION("i2c0_interrupt_driver_state")
cmsis_i2c_interrupt_driver_state_t I2C0_InterruptDriverState = {
#else
cmsis_i2c_interrupt_driver_state_t I2C0_InterruptDriverState = {
#endif
    &I2C0_Resource,
    &I2C0_handle,

};

static int32_t I2C0_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event)
{
    I2C0_InitPins();
    return I2C_InterruptInitialize(cb_event, &I2C0_InterruptDriverState);
}

static int32_t I2C0_InterruptUninitialize(void)
{
    I2C0_DeinitPins();
    return I2C_InterruptUninitialize(&I2C0_InterruptDriverState);
}

static int32_t I2C0_InterruptPowerControl(ARM_POWER_STATE state)
{
    return I2C_InterruptPowerControl(state, &I2C0_InterruptDriverState);
}

int32_t I2C0_Master_InterruptTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptTransmit(addr, data, num, xfer_pending, &I2C0_InterruptDriverState);
}

int32_t I2C0_Master_InterruptReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptReceive(addr, data, num, xfer_pending, &I2C0_InterruptDriverState);
}

int32_t I2C0_Slave_InterruptTransmit(const uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptTransmit(data, num, &I2C0_InterruptDriverState);
}

int32_t I2C0_Slave_InterruptReceive(uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptReceive(data, num, &I2C0_InterruptDriverState);
}

int32_t I2C0_InterruptGetDataCount(void)
{
    return I2C_InterruptGetDataCount(&I2C0_InterruptDriverState);
}

int32_t I2C0_InterruptControl(uint32_t control, uint32_t arg)
{
    return I2C_InterruptControl(control, arg, &I2C0_InterruptDriverState);
}

ARM_I2C_STATUS I2C0_InterruptGetStatus(void)
{
    return I2C_InterruptGetStatus(&I2C0_InterruptDriverState);
}

ARM_DRIVER_I2C Driver_I2C0 = {I2Cx_GetVersion,
                              I2Cx_GetCapabilities,
                              I2C0_InterruptInitialize,
                              I2C0_InterruptUninitialize,
                              I2C0_InterruptPowerControl,
                              I2C0_Master_InterruptTransmit,
                              I2C0_Master_InterruptReceive,
                              I2C0_Slave_InterruptTransmit,
                              I2C0_Slave_InterruptReceive,
                              I2C0_InterruptGetDataCount,
                              I2C0_InterruptControl,
                              I2C0_InterruptGetStatus};

#endif

#if defined(I2C1) && RTE_I2C1

/* User needs to provide the implementation for I2C1_GetFreq/InitPins/DeinitPins
in the application for enabling according instance. */
extern uint32_t I2C1_GetFreq(void);
extern void I2C1_InitPins(void);
extern void I2C1_DeinitPins(void);

cmsis_i2c_resource_t I2C1_Resource = {I2C1, I2C1_GetFreq};
cmsis_i2c_handle_t I2C1_Handle;

#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
ARMCC_SECTION("i2c1_interrupt_driver_state")
cmsis_i2c_interrupt_driver_state_t I2C1_InterruptDriverState = {
#else
cmsis_i2c_interrupt_driver_state_t I2C1_InterruptDriverState = {
#endif
    &I2C1_Resource,
    &I2C1_Handle,
};

static int32_t I2C1_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event)
{
    I2C1_InitPins();
    return I2C_InterruptInitialize(cb_event, &I2C1_InterruptDriverState);
}

static int32_t I2C1_InterruptUninitialize(void)
{
    I2C1_DeinitPins();
    return I2C_InterruptUninitialize(&I2C1_InterruptDriverState);
}

static int32_t I2C1_InterruptPowerControl(ARM_POWER_STATE state)
{
    return I2C_InterruptPowerControl(state, &I2C1_InterruptDriverState);
}

int32_t I2C1_Master_InterruptTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptTransmit(addr, data, num, xfer_pending, &I2C1_InterruptDriverState);
}

int32_t I2C1_Master_InterruptReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptReceive(addr, data, num, xfer_pending, &I2C1_InterruptDriverState);
}

int32_t I2C1_Slave_InterruptTransmit(const uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptTransmit(data, num, &I2C1_InterruptDriverState);
}

int32_t I2C1_Slave_InterruptReceive(uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptReceive(data, num, &I2C1_InterruptDriverState);
}

int32_t I2C1_InterruptGetDataCount(void)
{
    return I2C_InterruptGetDataCount(&I2C1_InterruptDriverState);
}

int32_t I2C1_InterruptControl(uint32_t control, uint32_t arg)
{
    return I2C_InterruptControl(control, arg, &I2C1_InterruptDriverState);
}

ARM_I2C_STATUS I2C1_InterruptGetStatus(void)
{
    return I2C_InterruptGetStatus(&I2C1_InterruptDriverState);
}

ARM_DRIVER_I2C Driver_I2C1 = {I2Cx_GetVersion,
                              I2Cx_GetCapabilities,
                              I2C1_InterruptInitialize,
                              I2C1_InterruptUninitialize,
                              I2C1_InterruptPowerControl,
                              I2C1_Master_InterruptTransmit,
                              I2C1_Master_InterruptReceive,
                              I2C1_Slave_InterruptTransmit,
                              I2C1_Slave_InterruptReceive,
                              I2C1_InterruptGetDataCount,
                              I2C1_InterruptControl,
                              I2C1_InterruptGetStatus};

#endif

#if defined(I2C2) && RTE_I2C2

/* User needs to provide the implementation for I2C2_GetFreq/InitPins/DeinitPins
in the application for enabling according instance. */
extern uint32_t I2C2_GetFreq(void);
extern void I2C2_InitPins(void);
extern void I2C2_DeinitPins(void);

cmsis_i2c_resource_t I2C2_Resource = {I2C2, I2C2_GetFreq};

cmsis_i2c_handle_t I2C2_Handle;

#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
ARMCC_SECTION("i2c2_interrupt_driver_state")
cmsis_i2c_interrupt_driver_state_t I2C2_InterruptDriverState = {
#else
cmsis_i2c_interrupt_driver_state_t I2C2_InterruptDriverState = {
#endif
    &I2C2_Resource,
    &I2C2_Handle,

};

static int32_t I2C2_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event)
{
    I2C2_InitPins();
    return I2C_InterruptInitialize(cb_event, &I2C2_InterruptDriverState);
}

static int32_t I2C2_InterruptUninitialize(void)
{
    I2C2_DeinitPins();
    return I2C_InterruptUninitialize(&I2C2_InterruptDriverState);
}

static int32_t I2C2_InterruptPowerControl(ARM_POWER_STATE state)
{
    return I2C_InterruptPowerControl(state, &I2C2_InterruptDriverState);
}

int32_t I2C2_Master_InterruptTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptTransmit(addr, data, num, xfer_pending, &I2C2_InterruptDriverState);
}

int32_t I2C2_Master_InterruptReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptReceive(addr, data, num, xfer_pending, &I2C2_InterruptDriverState);
}

int32_t I2C2_Slave_InterruptTransmit(const uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptTransmit(data, num, &I2C2_InterruptDriverState);
}

int32_t I2C2_Slave_InterruptReceive(uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptReceive(data, num, &I2C2_InterruptDriverState);
}

int32_t I2C2_InterruptGetDataCount(void)
{
    return I2C_InterruptGetDataCount(&I2C2_InterruptDriverState);
}

int32_t I2C2_InterruptControl(uint32_t control, uint32_t arg)
{
    return I2C_InterruptControl(control, arg, &I2C2_InterruptDriverState);
}

ARM_I2C_STATUS I2C2_InterruptGetStatus(void)
{
    return I2C_InterruptGetStatus(&I2C2_InterruptDriverState);
}

ARM_DRIVER_I2C Driver_I2C2 = {I2Cx_GetVersion,
                              I2Cx_GetCapabilities,
                              I2C2_InterruptInitialize,
                              I2C2_InterruptUninitialize,
                              I2C2_InterruptPowerControl,
                              I2C2_Master_InterruptTransmit,
                              I2C2_Master_InterruptReceive,
                              I2C2_Slave_InterruptTransmit,
                              I2C2_Slave_InterruptReceive,
                              I2C2_InterruptGetDataCount,
                              I2C2_InterruptControl,
                              I2C2_InterruptGetStatus};

#endif

#if defined(I2C3) && RTE_I2C3

/* User needs to provide the implementation for I2C3_GetFreq/InitPins/DeinitPins
in the application for enabling according instance. */
extern uint32_t I2C3_GetFreq(void);
extern void I2C3_InitPins(void);
extern void I2C3_DeinitPins(void);

cmsis_i2c_resource_t I2C3_Resource = {I2C3, I2C3_GetFreq};
cmsis_i2c_handle_t I2C3_Handle;

#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
ARMCC_SECTION("i2c3_interrupt_driver_state")
cmsis_i2c_interrupt_driver_state_t I2C3_InterruptDriverState = {
#else
cmsis_i2c_interrupt_driver_state_t I2C3_InterruptDriverState = {
#endif
    &I2C3_Resource,
    &I2C3_Handle,
};

static int32_t I2C3_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event)
{
    I2C3_InitPins();
    return I2C_InterruptInitialize(cb_event, &I2C3_InterruptDriverState);
}

static int32_t I2C3_InterruptUninitialize(void)
{
    I2C3_DeinitPins();
    return I2C_InterruptUninitialize(&I2C3_InterruptDriverState);
}

static int32_t I2C3_InterruptPowerControl(ARM_POWER_STATE state)
{
    return I2C_InterruptPowerControl(state, &I2C3_InterruptDriverState);
}

int32_t I2C3_Master_InterruptTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptTransmit(addr, data, num, xfer_pending, &I2C3_InterruptDriverState);
}

int32_t I2C3_Master_InterruptReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptReceive(addr, data, num, xfer_pending, &I2C3_InterruptDriverState);
}

int32_t I2C3_Slave_InterruptTransmit(const uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptTransmit(data, num, &I2C3_InterruptDriverState);
}

int32_t I2C3_Slave_InterruptReceive(uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptReceive(data, num, &I2C3_InterruptDriverState);
}

int32_t I2C3_InterruptGetDataCount(void)
{
    return I2C_InterruptGetDataCount(&I2C3_InterruptDriverState);
}

int32_t I2C3_InterruptControl(uint32_t control, uint32_t arg)
{
    return I2C_InterruptControl(control, arg, &I2C3_InterruptDriverState);
}

ARM_I2C_STATUS I2C3_InterruptGetStatus(void)
{
    return I2C_InterruptGetStatus(&I2C3_InterruptDriverState);
}

ARM_DRIVER_I2C Driver_I2C3 = {I2Cx_GetVersion,
                              I2Cx_GetCapabilities,
                              I2C3_InterruptInitialize,
                              I2C3_InterruptUninitialize,
                              I2C3_InterruptPowerControl,
                              I2C3_Master_InterruptTransmit,
                              I2C3_Master_InterruptReceive,
                              I2C3_Slave_InterruptTransmit,
                              I2C3_Slave_InterruptReceive,
                              I2C3_InterruptGetDataCount,
                              I2C3_InterruptControl,
                              I2C3_InterruptGetStatus};

#endif

#if defined(I2C4) && RTE_I2C4

/* User needs to provide the implementation for I2C4_GetFreq/InitPins/DeinitPins
in the application for enabling according instance. */
extern uint32_t I2C4_GetFreq(void);
extern void I2C4_InitPins(void);
extern void I2C4_DeinitPins(void);

cmsis_i2c_resource_t I2C4_Resource = {I2C4, I2C4_GetFreq};
cmsis_i2c_handle_t I2C4_Handle;

#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
ARMCC_SECTION("i2c3_interrupt_driver_state")
cmsis_i2c_interrupt_driver_state_t I2C4_InterruptDriverState = {
#else
cmsis_i2c_interrupt_driver_state_t I2C4_InterruptDriverState = {
#endif
    &I2C4_Resource,
    &I2C4_Handle,
};

static int32_t I2C4_InterruptInitialize(ARM_I2C_SignalEvent_t cb_event)
{
    I2C4_InitPins();
    return I2C_InterruptInitialize(cb_event, &I2C4_InterruptDriverState);
}

static int32_t I2C4_InterruptUninitialize(void)
{
    I2C4_DeinitPins();
    return I2C_InterruptUninitialize(&I2C4_InterruptDriverState);
}

static int32_t I2C4_InterruptPowerControl(ARM_POWER_STATE state)
{
    return I2C_InterruptPowerControl(state, &I2C4_InterruptDriverState);
}

int32_t I2C4_Master_InterruptTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptTransmit(addr, data, num, xfer_pending, &I2C4_InterruptDriverState);
}

int32_t I2C4_Master_InterruptReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
    return I2C_Master_InterruptReceive(addr, data, num, xfer_pending, &I2C4_InterruptDriverState);
}

int32_t I2C4_Slave_InterruptTransmit(const uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptTransmit(data, num, &I2C4_InterruptDriverState);
}

int32_t I2C4_Slave_InterruptReceive(uint8_t *data, uint32_t num)
{
    return I2C_Slave_InterruptReceive(data, num, &I2C4_InterruptDriverState);
}

int32_t I2C4_InterruptGetDataCount(void)
{
    return I2C_InterruptGetDataCount(&I2C4_InterruptDriverState);
}

int32_t I2C4_InterruptControl(uint32_t control, uint32_t arg)
{
    return I2C_InterruptControl(control, arg, &I2C4_InterruptDriverState);
}

ARM_I2C_STATUS I2C4_InterruptGetStatus(void)
{
    return I2C_InterruptGetStatus(&I2C4_InterruptDriverState);
}

ARM_DRIVER_I2C Driver_I2C4 = {I2Cx_GetVersion,
                              I2Cx_GetCapabilities,
                              I2C4_InterruptInitialize,
                              I2C4_InterruptUninitialize,
                              I2C4_InterruptPowerControl,
                              I2C4_Master_InterruptTransmit,
                              I2C4_Master_InterruptReceive,
                              I2C4_Slave_InterruptTransmit,
                              I2C4_Slave_InterruptReceive,
                              I2C4_InterruptGetDataCount,
                              I2C4_InterruptControl,
                              I2C4_InterruptGetStatus};

#endif