blob: 13d28fdbdbb535cdf665b39c8b52ad5127d0b9b9 [file] [log] [blame]
config ARCH_HAS_RESET_CONTROLLER
bool
menuconfig RESET_CONTROLLER
bool "Reset Controller Support"
default y if ARCH_HAS_RESET_CONTROLLER
help
Generic Reset Controller support.
This framework is designed to abstract reset handling of devices
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
if RESET_CONTROLLER
config RESET_A10SR
tristate "Altera Arria10 System Resource Reset"
depends on MFD_ALTERA_A10SR
help
This option enables support for the external reset functions for
peripheral PHYs on the Altera Arria10 System Resource Chip.
config RESET_ATH79
bool "AR71xx Reset Driver" if COMPILE_TEST
default ATH79
help
This enables the ATH79 reset controller driver that supports the
AR71xx SoC reset controller.
config RESET_AXS10X
bool "AXS10x Reset Driver" if COMPILE_TEST
default ARC_PLAT_AXS10X
help
This enables the reset controller driver for AXS10x.
config RESET_BERLIN
bool "Berlin Reset Driver" if COMPILE_TEST
default ARCH_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
config RESET_HSDK
bool "Synopsys HSDK Reset Driver"
depends on HAS_IOMEM
depends on ARC_SOC_HSDK || COMPILE_TEST
help
This enables the reset controller driver for HSDK board.
config RESET_IMX7
bool "i.MX7 Reset Driver" if COMPILE_TEST
depends on HAS_IOMEM
default SOC_IMX7D
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
config RESET_LANTIQ
bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
default SOC_TYPE_XWAY
help
This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
help
This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
config RESET_MESON
bool "Meson Reset Driver" if COMPILE_TEST
default ARCH_MESON
help
This enables the reset driver for Amlogic Meson SoCs.
config RESET_MESON_AUDIO_ARB
tristate "Meson Audio Memory Arbiter Reset Driver"
depends on ARCH_MESON || COMPILE_TEST
help
This enables the reset driver for Audio Memory Arbiter of
Amlogic's A113 based SoCs
config RESET_OXNAS
bool
config RESET_PISTACHIO
bool "Pistachio Reset Driver" if COMPILE_TEST
default MACH_PISTACHIO
help
This enables the reset driver for ImgTec Pistachio SoCs.
config RESET_QCOM_AOSS
bool "Qcom AOSS Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the AOSS (always on subsystem) reset driver
for Qualcomm SDM845 SoCs. Say Y if you want to control
reset signals provided by AOSS for Modem, Venus, ADSP,
GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
exclusive register space.
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- ZTE's zx2967 family
config RESET_STM32MP157
bool "STM32MP157 Reset Driver" if COMPILE_TEST
default MACH_STM32MP157
help
This enables the RCC reset controller driver for STM32 MPUs.
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
select RESET_SIMPLE
help
This enables the reset driver for Allwinner SoCs.
config RESET_TI_SCI
tristate "TI System Control Interface (TI-SCI) reset driver"
depends on TI_SCI_PROTOCOL
help
This enables the reset driver support over TI System Control Interface
available on some new TI's SoCs. If you wish to use reset resources
managed by the TI System Controller, say Y here. Otherwise, say N.
config RESET_TI_SYSCON
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
select MFD_SYSCON
help
This enables the reset driver support for TI devices with
memory-mapped reset registers as part of a syscon device node. If
you wish to use the reset framework for such memory-mapped devices,
say Y here. Otherwise, say N.
config RESET_UNIPHIER
tristate "Reset controller driver for UniPhier SoCs"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on OF && MFD_SYSCON
default ARCH_UNIPHIER
help
Support for reset controllers on UniPhier SoCs.
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
config RESET_UNIPHIER_USB3
tristate "USB3 reset driver for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
Support for the USB3 core reset on UniPhier SoCs.
Say Y if you want to control reset signals provided by
USB3 glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
default ARCH_ZYNQ
help
This enables the reset controller driver for Xilinx Zynq SoCs.
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
source "drivers/reset/tegra/Kconfig"
endif