| # |
| # Phy drivers for Samsung platforms |
| # |
| config PHY_EXYNOS_DP_VIDEO |
| tristate "EXYNOS SoC series Display Port PHY driver" |
| depends on OF |
| depends on ARCH_EXYNOS || COMPILE_TEST |
| default ARCH_EXYNOS |
| select GENERIC_PHY |
| help |
| Support for Display Port PHY found on Samsung EXYNOS SoCs. |
| |
| config PHY_EXYNOS_MIPI_VIDEO |
| tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" |
| depends on HAS_IOMEM |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select GENERIC_PHY |
| default y if ARCH_S5PV210 || ARCH_EXYNOS |
| help |
| Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P |
| and EXYNOS SoCs. |
| |
| config PHY_EXYNOS_PCIE |
| bool "Exynos PCIe PHY driver" |
| depends on OF && (ARCH_EXYNOS || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| Enable PCIe PHY support for Exynos SoC series. |
| This driver provides PHY interface for Exynos PCIe controller. |
| |
| config PHY_SAMSUNG_USB2 |
| tristate "Samsung USB 2.0 PHY driver" |
| depends on HAS_IOMEM |
| depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default ARCH_EXYNOS |
| help |
| Enable this to support the Samsung USB 2.0 PHY driver for Samsung |
| SoCs. This driver provides the interface for USB 2.0 PHY. Support |
| for particular PHYs will be enabled based on the SoC type in addition |
| to this driver. |
| |
| config PHY_EXYNOS4210_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default CPU_EXYNOS4210 |
| |
| config PHY_EXYNOS4X12_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS3250 || SOC_EXYNOS4412 |
| |
| config PHY_EXYNOS5250_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS5250 || SOC_EXYNOS5420 |
| |
| config PHY_S5PV210_USB2 |
| bool "Support for S5PV210" |
| depends on PHY_SAMSUNG_USB2 |
| depends on ARCH_S5PV210 |
| help |
| Enable USB PHY support for S5PV210. This option requires that Samsung |
| USB 2.0 PHY driver is enabled and means that support for this |
| particular SoC is compiled in the driver. In case of S5PV210 two phys |
| are available - device and host. |
| |
| config PHY_EXYNOS5_USBDRD |
| tristate "Exynos5 SoC series USB DRD PHY driver" |
| depends on ARCH_EXYNOS && OF |
| depends on HAS_IOMEM |
| depends on USB_DWC3_EXYNOS |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default y |
| help |
| Enable USB DRD PHY support for Exynos 5 SoC series. |
| This driver provides PHY interface for USB 3.0 DRD controller |
| present on Exynos5 SoC series. |
| |
| config PHY_EXYNOS5250_SATA |
| tristate "Exynos5250 Sata SerDes/PHY driver" |
| depends on SOC_EXYNOS5250 |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| select I2C |
| select I2C_S3C2410 |
| select MFD_SYSCON |
| help |
| Enable this to support SATA SerDes/Phy found on Samsung's |
| Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, |
| SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host |
| port to accept one SATA device. |
