/*
 * Copyright 2016 Broadcom
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License, version 2, as
 * published by the Free Software Foundation (the "GPL").
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License version 2 (GPLv2) for more details.
 *
 * You should have received a copy of the GNU General Public License
 * version 2 (GPLv2) along with this source code.
 */
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/mdio-mux.h>
#include <linux/delay.h>

#define MDIO_RATE_ADJ_EXT_OFFSET	0x000
#define MDIO_RATE_ADJ_INT_OFFSET	0x004
#define MDIO_RATE_ADJ_DIVIDENT_SHIFT	16

#define MDIO_SCAN_CTRL_OFFSET		0x008
#define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR	28

#define MDIO_PARAM_OFFSET		0x23c
#define MDIO_PARAM_MIIM_CYCLE		29
#define MDIO_PARAM_INTERNAL_SEL		25
#define MDIO_PARAM_BUS_ID		22
#define MDIO_PARAM_C45_SEL		21
#define MDIO_PARAM_PHY_ID		16
#define MDIO_PARAM_PHY_DATA		0

#define MDIO_READ_OFFSET		0x240
#define MDIO_READ_DATA_MASK		0xffff
#define MDIO_ADDR_OFFSET		0x244

#define MDIO_CTRL_OFFSET		0x248
#define MDIO_CTRL_WRITE_OP		0x1
#define MDIO_CTRL_READ_OP		0x2

#define MDIO_STAT_OFFSET		0x24c
#define MDIO_STAT_DONE			1

#define BUS_MAX_ADDR			32
#define EXT_BUS_START_ADDR		16

#define MDIO_REG_ADDR_SPACE_SIZE	0x250

#define MDIO_OPERATING_FREQUENCY	11000000
#define MDIO_RATE_ADJ_DIVIDENT		1

struct iproc_mdiomux_desc {
	void *mux_handle;
	void __iomem *base;
	struct device *dev;
	struct mii_bus *mii_bus;
	struct clk *core_clk;
};

static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
{
	u32 divisor;
	u32 val;

	/* Disable external mdio master access */
	val = readl(md->base + MDIO_SCAN_CTRL_OFFSET);
	val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR);
	writel(val, md->base + MDIO_SCAN_CTRL_OFFSET);

	if (md->core_clk) {
		/* use rate adjust regs to derrive the mdio's operating
		 * frequency from the specified core clock
		 */
		divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY;
		divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1);
		val = divisor;
		val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT;
		writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET);
		writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET);
	}
}

static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
{
	unsigned int timeout = 1000; /* loop for 1s */
	u32 val;

	do {
		val = readl(base + MDIO_STAT_OFFSET);
		if ((val & MDIO_STAT_DONE) == result)
			return 0;

		usleep_range(1000, 2000);
	} while (timeout--);

	return -ETIMEDOUT;
}

/* start_miim_ops- Program and start MDIO transaction over mdio bus.
 * @base: Base address
 * @phyid: phyid of the selected bus.
 * @reg: register offset to be read/written.
 * @val :0 if read op else value to be written in @reg;
 * @op: Operation that need to be carried out.
 *      MDIO_CTRL_READ_OP: Read transaction.
 *      MDIO_CTRL_WRITE_OP: Write transaction.
 *
 * Return value: Successful Read operation returns read reg values and write
 *      operation returns 0. Failure operation returns negative error code.
 */
static int start_miim_ops(void __iomem *base,
			  u16 phyid, u32 reg, u16 val, u32 op)
{
	u32 param;
	int ret;

	writel(0, base + MDIO_CTRL_OFFSET);
	ret = iproc_mdio_wait_for_idle(base, 0);
	if (ret)
		goto err;

	param = readl(base + MDIO_PARAM_OFFSET);
	param |= phyid << MDIO_PARAM_PHY_ID;
	param |= val << MDIO_PARAM_PHY_DATA;
	if (reg & MII_ADDR_C45)
		param |= BIT(MDIO_PARAM_C45_SEL);

	writel(param, base + MDIO_PARAM_OFFSET);

	writel(reg, base + MDIO_ADDR_OFFSET);

	writel(op, base + MDIO_CTRL_OFFSET);

	ret = iproc_mdio_wait_for_idle(base, 1);
	if (ret)
		goto err;

	if (op == MDIO_CTRL_READ_OP)
		ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
err:
	return ret;
}

static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
{
	struct iproc_mdiomux_desc *md = bus->priv;
	int ret;

	ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
	if (ret < 0)
		dev_err(&bus->dev, "mdiomux read operation failed!!!");

	return ret;
}

static int iproc_mdiomux_write(struct mii_bus *bus,
			       int phyid, int reg, u16 val)
{
	struct iproc_mdiomux_desc *md = bus->priv;
	int ret;

	/* Write val at reg offset */
	ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
	if (ret < 0)
		dev_err(&bus->dev, "mdiomux write operation failed!!!");

	return ret;
}

static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
				    void *data)
{
	struct iproc_mdiomux_desc *md = data;
	u32 param, bus_id;
	bool bus_dir;

	/* select bus and its properties */
	bus_dir = (desired_child < EXT_BUS_START_ADDR);
	bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);

	param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
	param |= (bus_id << MDIO_PARAM_BUS_ID);

	writel(param, md->base + MDIO_PARAM_OFFSET);
	return 0;
}

static int mdio_mux_iproc_probe(struct platform_device *pdev)
{
	struct iproc_mdiomux_desc *md;
	struct mii_bus *bus;
	struct resource *res;
	int rc;

	md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
	if (!md)
		return -ENOMEM;
	md->dev = &pdev->dev;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res->start & 0xfff) {
		/* For backward compatibility in case the
		 * base address is specified with an offset.
		 */
		dev_info(&pdev->dev, "fix base address in dt-blob\n");
		res->start &= ~0xfff;
		res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1;
	}
	md->base = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(md->base)) {
		dev_err(&pdev->dev, "failed to ioremap register\n");
		return PTR_ERR(md->base);
	}

	md->mii_bus = devm_mdiobus_alloc(&pdev->dev);
	if (!md->mii_bus) {
		dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
		return -ENOMEM;
	}

	md->core_clk = devm_clk_get(&pdev->dev, NULL);
	if (md->core_clk == ERR_PTR(-ENOENT) ||
	    md->core_clk == ERR_PTR(-EINVAL))
		md->core_clk = NULL;
	else if (IS_ERR(md->core_clk))
		return PTR_ERR(md->core_clk);

	rc = clk_prepare_enable(md->core_clk);
	if (rc) {
		dev_err(&pdev->dev, "failed to enable core clk\n");
		return rc;
	}

	bus = md->mii_bus;
	bus->priv = md;
	bus->name = "iProc MDIO mux bus";
	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
	bus->parent = &pdev->dev;
	bus->read = iproc_mdiomux_read;
	bus->write = iproc_mdiomux_write;

	bus->phy_mask = ~0;
	bus->dev.of_node = pdev->dev.of_node;
	rc = mdiobus_register(bus);
	if (rc) {
		dev_err(&pdev->dev, "mdiomux registration failed\n");
		goto out_clk;
	}

	platform_set_drvdata(pdev, md);

	rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn,
			   &md->mux_handle, md, md->mii_bus);
	if (rc) {
		dev_info(md->dev, "mdiomux initialization failed\n");
		goto out_register;
	}

	mdio_mux_iproc_config(md);

	dev_info(md->dev, "iProc mdiomux registered\n");
	return 0;

out_register:
	mdiobus_unregister(bus);
out_clk:
	clk_disable_unprepare(md->core_clk);
	return rc;
}

static int mdio_mux_iproc_remove(struct platform_device *pdev)
{
	struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);

	mdio_mux_uninit(md->mux_handle);
	mdiobus_unregister(md->mii_bus);
	clk_disable_unprepare(md->core_clk);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int mdio_mux_iproc_suspend(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);

	clk_disable_unprepare(md->core_clk);

	return 0;
}

static int mdio_mux_iproc_resume(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
	int rc;

	rc = clk_prepare_enable(md->core_clk);
	if (rc) {
		dev_err(md->dev, "failed to enable core clk\n");
		return rc;
	}
	mdio_mux_iproc_config(md);

	return 0;
}
#endif

static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops,
			 mdio_mux_iproc_suspend, mdio_mux_iproc_resume);

static const struct of_device_id mdio_mux_iproc_match[] = {
	{
		.compatible = "brcm,mdio-mux-iproc",
	},
	{},
};
MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);

static struct platform_driver mdiomux_iproc_driver = {
	.driver = {
		.name		= "mdio-mux-iproc",
		.of_match_table = mdio_mux_iproc_match,
		.pm		= &mdio_mux_iproc_pm_ops,
	},
	.probe		= mdio_mux_iproc_probe,
	.remove		= mdio_mux_iproc_remove,
};

module_platform_driver(mdiomux_iproc_driver);

MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
MODULE_LICENSE("GPL v2");