drivers/iio/magnetometer/st_magn_core.c - linux-mtk - Git at Google

 /*
  * STMicroelectronics magnetometers driver
  *
  * Copyright 2012-2013 STMicroelectronics Inc.
  *
  * Denis Ciocca <denis.ciocca@st.com>
  *
  * Licensed under the GPL-2.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>

 #include <linux/iio/common/st_sensors.h>
 #include "st_magn.h"

 #define ST_MAGN_NUMBER_DATA_CHANNELS		3

 /* DEFAULT VALUE FOR SENSORS */
 #define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0X03
 #define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0X07
 #define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0X05

 /* FULLSCALE */
 #define ST_MAGN_FS_AVL_1300MG			1300
 #define ST_MAGN_FS_AVL_1900MG			1900
 #define ST_MAGN_FS_AVL_2500MG			2500
 #define ST_MAGN_FS_AVL_4000MG			4000
 #define ST_MAGN_FS_AVL_4700MG			4700
 #define ST_MAGN_FS_AVL_5600MG			5600
 #define ST_MAGN_FS_AVL_8000MG			8000
 #define ST_MAGN_FS_AVL_8100MG			8100
 #define ST_MAGN_FS_AVL_12000MG			12000
 #define ST_MAGN_FS_AVL_15000MG			15000
 #define ST_MAGN_FS_AVL_16000MG			16000

 /* Special L addresses for Sensor 2 */
 #define ST_MAGN_2_OUT_X_L_ADDR			0x28
 #define ST_MAGN_2_OUT_Y_L_ADDR			0x2a
 #define ST_MAGN_2_OUT_Z_L_ADDR			0x2c

 /* Special L addresses for sensor 3 */
 #define ST_MAGN_3_OUT_X_L_ADDR			0x68
 #define ST_MAGN_3_OUT_Y_L_ADDR			0x6a
 #define ST_MAGN_3_OUT_Z_L_ADDR			0x6c

 static const struct iio_chan_spec st_magn_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
 			ST_MAGN_DEFAULT_OUT_X_H_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
 			ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
 			ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

 static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
 			ST_MAGN_2_OUT_X_L_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
 			ST_MAGN_2_OUT_Y_L_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
 			ST_MAGN_2_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

 static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
 			ST_MAGN_3_OUT_X_L_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
 			ST_MAGN_3_OUT_Y_L_ADDR),
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
 			ST_MAGN_3_OUT_Z_L_ADDR),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };

 static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
 		.wai = 0, /* This sensor has no valid WhoAmI report 0 */
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM303DLH_MAGN_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
 		.odr = {
 			.addr = 0x00,
 			.mask = 0x1c,
 			.odr_avl = {
 				{ .hz = 1, .value = 0x00 },
 				{ .hz = 2, .value = 0x01 },
 				{ .hz = 3, .value = 0x02 },
 				{ .hz = 8, .value = 0x03 },
 				{ .hz = 15, .value = 0x04 },
 				{ .hz = 30, .value = 0x05 },
 				{ .hz = 75, .value = 0x06 },
 				/* 220 Hz, 0x07 reportedly exist */
 			},
 		},
 		.pw = {
 			.addr = 0x02,
 			.mask = 0x03,
 			.value_on = 0x00,
 			.value_off = 0x03,
 		},
 		.fs = {
 			.addr = 0x01,
 			.mask = 0xe0,
 			.fs_avl = {
 				[0] = {
 					.num = ST_MAGN_FS_AVL_1300MG,
 					.value = 0x01,
 					.gain = 1100,
 					.gain2 = 980,
 				},
 				[1] = {
 					.num = ST_MAGN_FS_AVL_1900MG,
 					.value = 0x02,
 					.gain = 855,
 					.gain2 = 760,
 				},
 				[2] = {
 					.num = ST_MAGN_FS_AVL_2500MG,
 					.value = 0x03,
 					.gain = 670,
 					.gain2 = 600,
 				},
 				[3] = {
 					.num = ST_MAGN_FS_AVL_4000MG,
 					.value = 0x04,
 					.gain = 450,
 					.gain2 = 400,
 				},
 				[4] = {
 					.num = ST_MAGN_FS_AVL_4700MG,
 					.value = 0x05,
 					.gain = 400,
 					.gain2 = 355,
 				},
 				[5] = {
 					.num = ST_MAGN_FS_AVL_5600MG,
 					.value = 0x06,
 					.gain = 330,
 					.gain2 = 295,
 				},
 				[6] = {
 					.num = ST_MAGN_FS_AVL_8100MG,
 					.value = 0x07,
 					.gain = 230,
 					.gain2 = 205,
 				},
 			},
 		},
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
 		.wai = 0x3c,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM303DLHC_MAGN_DEV_NAME,
 			[1] = LSM303DLM_MAGN_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
 		.odr = {
 			.addr = 0x00,
 			.mask = 0x1c,
 			.odr_avl = {
 				{ .hz = 1, .value = 0x00 },
 				{ .hz = 2, .value = 0x01 },
 				{ .hz = 3, .value = 0x02 },
 				{ .hz = 8, .value = 0x03 },
 				{ .hz = 15, .value = 0x04 },
 				{ .hz = 30, .value = 0x05 },
 				{ .hz = 75, .value = 0x06 },
 				{ .hz = 220, .value = 0x07 },
 			},
 		},
 		.pw = {
 			.addr = 0x02,
 			.mask = 0x03,
 			.value_on = 0x00,
 			.value_off = 0x03,
 		},
 		.fs = {
 			.addr = 0x01,
 			.mask = 0xe0,
 			.fs_avl = {
 				[0] = {
 					.num = ST_MAGN_FS_AVL_1300MG,
 					.value = 0x01,
 					.gain = 909,
 					.gain2 = 1020,
 				},
 				[1] = {
 					.num = ST_MAGN_FS_AVL_1900MG,
 					.value = 0x02,
 					.gain = 1169,
 					.gain2 = 1315,
 				},
 				[2] = {
 					.num = ST_MAGN_FS_AVL_2500MG,
 					.value = 0x03,
 					.gain = 1492,
 					.gain2 = 1666,
 				},
 				[3] = {
 					.num = ST_MAGN_FS_AVL_4000MG,
 					.value = 0x04,
 					.gain = 2222,
 					.gain2 = 2500,
 				},
 				[4] = {
 					.num = ST_MAGN_FS_AVL_4700MG,
 					.value = 0x05,
 					.gain = 2500,
 					.gain2 = 2816,
 				},
 				[5] = {
 					.num = ST_MAGN_FS_AVL_5600MG,
 					.value = 0x06,
 					.gain = 3030,
 					.gain2 = 3389,
 				},
 				[6] = {
 					.num = ST_MAGN_FS_AVL_8100MG,
 					.value = 0x07,
 					.gain = 4347,
 					.gain2 = 4878,
 				},
 			},
 		},
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
 		.wai = 0x3d,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3MDL_MAGN_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
 		.odr = {
 			.addr = 0x20,
 			.mask = 0x1c,
 			.odr_avl = {
 				{ .hz = 1, .value = 0x00 },
 				{ .hz = 2, .value = 0x01 },
 				{ .hz = 3, .value = 0x02 },
 				{ .hz = 5, .value = 0x03 },
 				{ .hz = 10, .value = 0x04 },
 				{ .hz = 20, .value = 0x05 },
 				{ .hz = 40, .value = 0x06 },
 				{ .hz = 80, .value = 0x07 },
 			},
 		},
 		.pw = {
 			.addr = 0x22,
 			.mask = 0x03,
 			.value_on = 0x00,
 			.value_off = 0x03,
 		},
 		.fs = {
 			.addr = 0x21,
 			.mask = 0x60,
 			.fs_avl = {
 				[0] = {
 					.num = ST_MAGN_FS_AVL_4000MG,
 					.value = 0x00,
 					.gain = 146,
 				},
 				[1] = {
 					.num = ST_MAGN_FS_AVL_8000MG,
 					.value = 0x01,
 					.gain = 292,
 				},
 				[2] = {
 					.num = ST_MAGN_FS_AVL_12000MG,
 					.value = 0x02,
 					.gain = 438,
 				},
 				[3] = {
 					.num = ST_MAGN_FS_AVL_16000MG,
 					.value = 0x03,
 					.gain = 584,
 				},
 			},
 		},
 		.drdy_irq = {
 			/* drdy line is routed drdy pin */
 			.stat_drdy = {
 				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
 				.mask = 0x07,
 			},
 		},
 		.sim = {
 			.addr = 0x22,
 			.value = BIT(2),
 		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
 		.wai = 0x40,
 		.wai_addr = 0x4f,
 		.sensors_supported = {
 			[0] = LSM303AGR_MAGN_DEV_NAME,
 			[1] = LIS2MDL_MAGN_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
 		.odr = {
 			.addr = 0x60,
 			.mask = 0x0c,
 			.odr_avl = {
 				{ .hz = 10, .value = 0x00 },
 				{ .hz = 20, .value = 0x01 },
 				{ .hz = 50, .value = 0x02 },
 				{ .hz = 100, .value = 0x03 },
 			},
 		},
 		.pw = {
 			.addr = 0x60,
 			.mask = 0x03,
 			.value_on = 0x00,
 			.value_off = 0x03,
 		},
 		.fs = {
 			.fs_avl = {
 				[0] = {
 					.num = ST_MAGN_FS_AVL_15000MG,
 					.gain = 1500,
 				},
 			},
 		},
 		.bdu = {
 			.addr = 0x62,
 			.mask = 0x10,
 		},
 		.drdy_irq = {
 			.int1 = {
 				.addr = 0x62,
 				.mask = 0x01,
 			},
 			.stat_drdy = {
 				.addr = 0x67,
 				.mask = 0x07,
 			},
 		},
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
 };

 static int st_magn_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *ch, int *val,
 							int *val2, long mask)
 {
 	int err;
 	struct st_sensor_data *mdata = iio_priv(indio_dev);

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		err = st_sensors_read_info_raw(indio_dev, ch, val);
 		if (err < 0)
 			goto read_error;

 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
 		if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
 					(mdata->current_fullscale->gain2 != 0))
 			*val2 = mdata->current_fullscale->gain2;
 		else
 			*val2 = mdata->current_fullscale->gain;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = mdata->odr;
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}

 read_error:
 	return err;
 }

 static int st_magn_write_raw(struct iio_dev *indio_dev,
 		struct iio_chan_spec const *chan, int val, int val2, long mask)
 {
 	int err;

 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
 		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		if (val2)
 			return -EINVAL;
 		mutex_lock(&indio_dev->mlock);
 		err = st_sensors_set_odr(indio_dev, val);
 		mutex_unlock(&indio_dev->mlock);
 		return err;
 	default:
 		err = -EINVAL;
 	}

 	return err;
 }

 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);

 static struct attribute *st_magn_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
 	NULL,
 };

 static const struct attribute_group st_magn_attribute_group = {
 	.attrs = st_magn_attributes,
 };

 static const struct iio_info magn_info = {
 	.attrs = &st_magn_attribute_group,
 	.read_raw = &st_magn_read_raw,
 	.write_raw = &st_magn_write_raw,
 	.debugfs_reg_access = &st_sensors_debugfs_reg_access,
 };

 #ifdef CONFIG_IIO_TRIGGER
 static const struct iio_trigger_ops st_magn_trigger_ops = {
 	.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
 	.validate_device = st_sensors_validate_device,
 };
 #define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
 #else
 #define ST_MAGN_TRIGGER_OPS NULL
 #endif

 int st_magn_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
 	int irq = mdata->get_irq_data_ready(indio_dev);
 	int err;

 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &magn_info;
 	mutex_init(&mdata->tb.buf_lock);

 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;

 	err = st_sensors_check_device_support(indio_dev,
 					ARRAY_SIZE(st_magn_sensors_settings),
 					st_magn_sensors_settings);
 	if (err < 0)
 		goto st_magn_power_off;

 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
 	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
 	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

 	mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
 					&mdata->sensor_settings->fs.fs_avl[0];
 	mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;

 	err = st_sensors_init_sensor(indio_dev, NULL);
 	if (err < 0)
 		goto st_magn_power_off;

 	err = st_magn_allocate_ring(indio_dev);
 	if (err < 0)
 		goto st_magn_power_off;

 	if (irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						ST_MAGN_TRIGGER_OPS);
 		if (err < 0)
 			goto st_magn_probe_trigger_error;
 	}

 	err = iio_device_register(indio_dev);
 	if (err)
 		goto st_magn_device_register_error;

 	dev_info(&indio_dev->dev, "registered magnetometer %s\n",
 		 indio_dev->name);

 	return 0;

 st_magn_device_register_error:
 	if (irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_magn_probe_trigger_error:
 	st_magn_deallocate_ring(indio_dev);
 st_magn_power_off:
 	st_sensors_power_disable(indio_dev);

 	return err;
 }
 EXPORT_SYMBOL(st_magn_common_probe);

 void st_magn_common_remove(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);

 	st_sensors_power_disable(indio_dev);

 	iio_device_unregister(indio_dev);
 	if (mdata->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);

 	st_magn_deallocate_ring(indio_dev);
 }
 EXPORT_SYMBOL(st_magn_common_remove);

 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
 MODULE_LICENSE("GPL v2");
	/*
	* STMicroelectronics magnetometers driver
	*
	* Copyright 2012-2013 STMicroelectronics Inc.
	*
	* Denis Ciocca <denis.ciocca@st.com>
	*
	* Licensed under the GPL-2.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/errno.h>
	#include <linux/types.h>
	#include <linux/mutex.h>
	#include <linux/interrupt.h>
	#include <linux/i2c.h>
	#include <linux/gpio.h>
	#include <linux/irq.h>
	#include <linux/delay.h>
	#include <linux/iio/iio.h>
	#include <linux/iio/sysfs.h>
	#include <linux/iio/buffer.h>

	#include <linux/iio/common/st_sensors.h>
	#include "st_magn.h"

	#define ST_MAGN_NUMBER_DATA_CHANNELS 3

	/* DEFAULT VALUE FOR SENSORS */
	#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
	#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
	#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05

	/* FULLSCALE */
	#define ST_MAGN_FS_AVL_1300MG 1300
	#define ST_MAGN_FS_AVL_1900MG 1900
	#define ST_MAGN_FS_AVL_2500MG 2500
	#define ST_MAGN_FS_AVL_4000MG 4000
	#define ST_MAGN_FS_AVL_4700MG 4700
	#define ST_MAGN_FS_AVL_5600MG 5600
	#define ST_MAGN_FS_AVL_8000MG 8000
	#define ST_MAGN_FS_AVL_8100MG 8100
	#define ST_MAGN_FS_AVL_12000MG 12000
	#define ST_MAGN_FS_AVL_15000MG 15000
	#define ST_MAGN_FS_AVL_16000MG 16000

	/* Special L addresses for Sensor 2 */
	#define ST_MAGN_2_OUT_X_L_ADDR 0x28
	#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
	#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c

	/* Special L addresses for sensor 3 */
	#define ST_MAGN_3_OUT_X_L_ADDR 0x68
	#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
	#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c

	static const struct iio_chan_spec st_magn_16bit_channels[] = {
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
	ST_MAGN_DEFAULT_OUT_X_H_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
	ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
	ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
	};

	static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
	ST_MAGN_2_OUT_X_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
	ST_MAGN_2_OUT_Y_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
	ST_MAGN_2_OUT_Z_L_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
	};

	static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
	ST_MAGN_3_OUT_X_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
	ST_MAGN_3_OUT_Y_L_ADDR),
	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
	BIT(IIO_CHAN_INFO_RAW) \| BIT(IIO_CHAN_INFO_SCALE),
	ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
	ST_MAGN_3_OUT_Z_L_ADDR),
	IIO_CHAN_SOFT_TIMESTAMP(3)
	};

	static const struct st_sensor_settings st_magn_sensors_settings[] = {
	{
	.wai = 0, /* This sensor has no valid WhoAmI report 0 */
	.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
	.sensors_supported = {
	[0] = LSM303DLH_MAGN_DEV_NAME,
	},
	.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
	.odr = {
	.addr = 0x00,
	.mask = 0x1c,
	.odr_avl = {
	{ .hz = 1, .value = 0x00 },
	{ .hz = 2, .value = 0x01 },
	{ .hz = 3, .value = 0x02 },
	{ .hz = 8, .value = 0x03 },
	{ .hz = 15, .value = 0x04 },
	{ .hz = 30, .value = 0x05 },
	{ .hz = 75, .value = 0x06 },
	/* 220 Hz, 0x07 reportedly exist */
	},
	},
	.pw = {
	.addr = 0x02,
	.mask = 0x03,
	.value_on = 0x00,
	.value_off = 0x03,
	},
	.fs = {
	.addr = 0x01,
	.mask = 0xe0,
	.fs_avl = {
	[0] = {
	.num = ST_MAGN_FS_AVL_1300MG,
	.value = 0x01,
	.gain = 1100,
	.gain2 = 980,
	},
	[1] = {
	.num = ST_MAGN_FS_AVL_1900MG,
	.value = 0x02,
	.gain = 855,
	.gain2 = 760,
	},
	[2] = {
	.num = ST_MAGN_FS_AVL_2500MG,
	.value = 0x03,
	.gain = 670,
	.gain2 = 600,
	},
	[3] = {
	.num = ST_MAGN_FS_AVL_4000MG,
	.value = 0x04,
	.gain = 450,
	.gain2 = 400,
	},
	[4] = {
	.num = ST_MAGN_FS_AVL_4700MG,
	.value = 0x05,
	.gain = 400,
	.gain2 = 355,
	},
	[5] = {
	.num = ST_MAGN_FS_AVL_5600MG,
	.value = 0x06,
	.gain = 330,
	.gain2 = 295,
	},
	[6] = {
	.num = ST_MAGN_FS_AVL_8100MG,
	.value = 0x07,
	.gain = 230,
	.gain2 = 205,
	},
	},
	},
	.multi_read_bit = false,
	.bootime = 2,
	},
	{
	.wai = 0x3c,
	.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
	.sensors_supported = {
	[0] = LSM303DLHC_MAGN_DEV_NAME,
	[1] = LSM303DLM_MAGN_DEV_NAME,
	},
	.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
	.odr = {
	.addr = 0x00,
	.mask = 0x1c,
	.odr_avl = {
	{ .hz = 1, .value = 0x00 },
	{ .hz = 2, .value = 0x01 },
	{ .hz = 3, .value = 0x02 },
	{ .hz = 8, .value = 0x03 },
	{ .hz = 15, .value = 0x04 },
	{ .hz = 30, .value = 0x05 },
	{ .hz = 75, .value = 0x06 },
	{ .hz = 220, .value = 0x07 },
	},
	},
	.pw = {
	.addr = 0x02,
	.mask = 0x03,
	.value_on = 0x00,
	.value_off = 0x03,
	},
	.fs = {
	.addr = 0x01,
	.mask = 0xe0,
	.fs_avl = {
	[0] = {
	.num = ST_MAGN_FS_AVL_1300MG,
	.value = 0x01,
	.gain = 909,
	.gain2 = 1020,
	},
	[1] = {
	.num = ST_MAGN_FS_AVL_1900MG,
	.value = 0x02,
	.gain = 1169,
	.gain2 = 1315,
	},
	[2] = {
	.num = ST_MAGN_FS_AVL_2500MG,
	.value = 0x03,
	.gain = 1492,
	.gain2 = 1666,
	},
	[3] = {
	.num = ST_MAGN_FS_AVL_4000MG,
	.value = 0x04,
	.gain = 2222,
	.gain2 = 2500,
	},
	[4] = {
	.num = ST_MAGN_FS_AVL_4700MG,
	.value = 0x05,
	.gain = 2500,
	.gain2 = 2816,
	},
	[5] = {
	.num = ST_MAGN_FS_AVL_5600MG,
	.value = 0x06,
	.gain = 3030,
	.gain2 = 3389,
	},
	[6] = {
	.num = ST_MAGN_FS_AVL_8100MG,
	.value = 0x07,
	.gain = 4347,
	.gain2 = 4878,
	},
	},
	},
	.multi_read_bit = false,
	.bootime = 2,
	},
	{
	.wai = 0x3d,
	.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
	.sensors_supported = {
	[0] = LIS3MDL_MAGN_DEV_NAME,
	},
	.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
	.odr = {
	.addr = 0x20,
	.mask = 0x1c,
	.odr_avl = {
	{ .hz = 1, .value = 0x00 },
	{ .hz = 2, .value = 0x01 },
	{ .hz = 3, .value = 0x02 },
	{ .hz = 5, .value = 0x03 },
	{ .hz = 10, .value = 0x04 },
	{ .hz = 20, .value = 0x05 },
	{ .hz = 40, .value = 0x06 },
	{ .hz = 80, .value = 0x07 },
	},
	},
	.pw = {
	.addr = 0x22,
	.mask = 0x03,
	.value_on = 0x00,
	.value_off = 0x03,
	},
	.fs = {
	.addr = 0x21,
	.mask = 0x60,
	.fs_avl = {
	[0] = {
	.num = ST_MAGN_FS_AVL_4000MG,
	.value = 0x00,
	.gain = 146,
	},
	[1] = {
	.num = ST_MAGN_FS_AVL_8000MG,
	.value = 0x01,
	.gain = 292,
	},
	[2] = {
	.num = ST_MAGN_FS_AVL_12000MG,
	.value = 0x02,
	.gain = 438,
	},
	[3] = {
	.num = ST_MAGN_FS_AVL_16000MG,
	.value = 0x03,
	.gain = 584,
	},
	},
	},
	.drdy_irq = {
	/* drdy line is routed drdy pin */
	.stat_drdy = {
	.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
	.mask = 0x07,
	},
	},
	.sim = {
	.addr = 0x22,
	.value = BIT(2),
	},
	.multi_read_bit = true,
	.bootime = 2,
	},
	{
	.wai = 0x40,
	.wai_addr = 0x4f,
	.sensors_supported = {
	[0] = LSM303AGR_MAGN_DEV_NAME,
	[1] = LIS2MDL_MAGN_DEV_NAME,
	},
	.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
	.odr = {
	.addr = 0x60,
	.mask = 0x0c,
	.odr_avl = {
	{ .hz = 10, .value = 0x00 },
	{ .hz = 20, .value = 0x01 },
	{ .hz = 50, .value = 0x02 },
	{ .hz = 100, .value = 0x03 },
	},
	},
	.pw = {
	.addr = 0x60,
	.mask = 0x03,
	.value_on = 0x00,
	.value_off = 0x03,
	},
	.fs = {
	.fs_avl = {
	[0] = {
	.num = ST_MAGN_FS_AVL_15000MG,
	.gain = 1500,
	},
	},
	},
	.bdu = {
	.addr = 0x62,
	.mask = 0x10,
	},
	.drdy_irq = {
	.int1 = {
	.addr = 0x62,
	.mask = 0x01,
	},
	.stat_drdy = {
	.addr = 0x67,
	.mask = 0x07,
	},
	},
	.multi_read_bit = false,
	.bootime = 2,
	},
	};

	static int st_magn_read_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const ch, int val,
	int *val2, long mask)
	{
	int err;
	struct st_sensor_data *mdata = iio_priv(indio_dev);

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
	err = st_sensors_read_info_raw(indio_dev, ch, val);
	if (err < 0)
	goto read_error;

	return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
	*val = 0;
	if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
	(mdata->current_fullscale->gain2 != 0))
	*val2 = mdata->current_fullscale->gain2;
	else
	*val2 = mdata->current_fullscale->gain;
	return IIO_VAL_INT_PLUS_MICRO;
	case IIO_CHAN_INFO_SAMP_FREQ:
	*val = mdata->odr;
	return IIO_VAL_INT;
	default:
	return -EINVAL;
	}

	read_error:
	return err;
	}

	static int st_magn_write_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const *chan, int val, int val2, long mask)
	{
	int err;

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
	err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
	break;
	case IIO_CHAN_INFO_SAMP_FREQ:
	if (val2)
	return -EINVAL;
	mutex_lock(&indio_dev->mlock);
	err = st_sensors_set_odr(indio_dev, val);
	mutex_unlock(&indio_dev->mlock);
	return err;
	default:
	err = -EINVAL;
	}

	return err;
	}

	static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
	static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);

	static struct attribute *st_magn_attributes[] = {
	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
	&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
	NULL,
	};

	static const struct attribute_group st_magn_attribute_group = {
	.attrs = st_magn_attributes,
	};

	static const struct iio_info magn_info = {
	.attrs = &st_magn_attribute_group,
	.read_raw = &st_magn_read_raw,
	.write_raw = &st_magn_write_raw,
	.debugfs_reg_access = &st_sensors_debugfs_reg_access,
	};

	#ifdef CONFIG_IIO_TRIGGER
	static const struct iio_trigger_ops st_magn_trigger_ops = {
	.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
	.validate_device = st_sensors_validate_device,
	};
	#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
	#else
	#define ST_MAGN_TRIGGER_OPS NULL
	#endif

	int st_magn_common_probe(struct iio_dev *indio_dev)
	{
	struct st_sensor_data *mdata = iio_priv(indio_dev);
	int irq = mdata->get_irq_data_ready(indio_dev);
	int err;

	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &magn_info;
	mutex_init(&mdata->tb.buf_lock);

	err = st_sensors_power_enable(indio_dev);
	if (err)
	return err;

	err = st_sensors_check_device_support(indio_dev,
	ARRAY_SIZE(st_magn_sensors_settings),
	st_magn_sensors_settings);
	if (err < 0)
	goto st_magn_power_off;

	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
	indio_dev->channels = mdata->sensor_settings->ch;
	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;

	mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
	&mdata->sensor_settings->fs.fs_avl[0];
	mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;

	err = st_sensors_init_sensor(indio_dev, NULL);
	if (err < 0)
	goto st_magn_power_off;

	err = st_magn_allocate_ring(indio_dev);
	if (err < 0)
	goto st_magn_power_off;

	if (irq > 0) {
	err = st_sensors_allocate_trigger(indio_dev,
	ST_MAGN_TRIGGER_OPS);
	if (err < 0)
	goto st_magn_probe_trigger_error;
	}

	err = iio_device_register(indio_dev);
	if (err)
	goto st_magn_device_register_error;

	dev_info(&indio_dev->dev, "registered magnetometer %s\n",
	indio_dev->name);

	return 0;

	st_magn_device_register_error:
	if (irq > 0)
	st_sensors_deallocate_trigger(indio_dev);
	st_magn_probe_trigger_error:
	st_magn_deallocate_ring(indio_dev);
	st_magn_power_off:
	st_sensors_power_disable(indio_dev);

	return err;
	}
	EXPORT_SYMBOL(st_magn_common_probe);

	void st_magn_common_remove(struct iio_dev *indio_dev)
	{
	struct st_sensor_data *mdata = iio_priv(indio_dev);

	st_sensors_power_disable(indio_dev);

	iio_device_unregister(indio_dev);
	if (mdata->get_irq_data_ready(indio_dev) > 0)
	st_sensors_deallocate_trigger(indio_dev);

	st_magn_deallocate_ring(indio_dev);
	}
	EXPORT_SYMBOL(st_magn_common_remove);

	MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
	MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
	MODULE_LICENSE("GPL v2");