Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  Added support for usb ethernet (0x0fe6, 0x9700)
  r8169: fix RTL8168DP power off issue.
  r8169: correct settings of rtl8102e.
  r8169: fix incorrect args to oob notify.
  DM9000B: Fix PHY power for network down/up
  DM9000B: Fix reg_save after spin_lock in dm9000_timeout
  net_sched: long word align struct qdisc_skb_cb data
  sfc: lower stack usage in efx_ethtool_self_test
  bridge: Use IPv6 link-local address for multicast listener queries
  bridge: Fix MLD queries' ethernet source address
  bridge: Allow mcast snooping for transient link local addresses too
  ipv6: Add IPv6 multicast address flag defines
  bridge: Add missing ntohs()s for MLDv2 report parsing
  bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
  bridge: Fix IPv6 multicast snooping by storing correct protocol type
  p54pci: update receive dma buffers before and after processing
  fix cfg80211_wext_siwfreq lock ordering...
  rt2x00: Fix WPA TKIP Michael MIC failures.
  ath5k: Fix fast channel switching
  tcp: undo_retrans counter fixes
  ...
diff --git a/.gitignore b/.gitignore
index 8faa6c0..5d56a3f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -28,6 +28,7 @@
 *.gz
 *.bz2
 *.lzma
+*.xz
 *.lzo
 *.patch
 *.gcno
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 5e87ad5..f51f285 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef1..a22ecf4 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee..d2b56a4 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4..f4a04c0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c75..6f99e12 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
diff --git a/Makefile b/Makefile
index 5e40aa2..26d7d82 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 26d45e5..166efa2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1177,6 +1177,31 @@
 	  visible impact on the overall performance or power consumption of the
 	  processor.
 
+config ARM_ERRATA_751472
+	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 751472 Cortex-A9 (prior
+	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
+	  completion of a following broadcasted operation if the second
+	  operation is received by a CPU before the ICIALLUIS has completed,
+	  potentially leading to corrupted entries in the cache or TLB.
+
+config ARM_ERRATA_753970
+	bool "ARM errata: cache sync operation may be faulty"
+	depends on CACHE_PL310
+	help
+	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
+
+	  Under some condition the effect of cache sync operation on
+	  the store buffer still remains when the operation completes.
+	  This means that the store buffer is always asked to drain and
+	  this prevents it from merging any further writes. The workaround
+	  is to replace the normal offset of cache sync operation (0x730)
+	  by another offset targeting an unmapped PL310 register 0x740.
+	  This has the same effect as the cache sync operation: store buffer
+	  drain and waiting for all buffers empty.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1ad..6f7b292 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -15,7 +15,7 @@
 LDFLAGS_vmlinux	+= --be8
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index ab204db..c602896 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,3 +1,7 @@
 font.c
-piggy.gz
+lib1funcs.S
+piggy.gzip
+piggy.lzo
+piggy.lzma
+vmlinux
 vmlinux.lds
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 5aeec1e..16bd480 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -36,6 +36,7 @@
 #define L2X0_RAW_INTR_STAT		0x21C
 #define L2X0_INTR_CLEAR			0x220
 #define L2X0_CACHE_SYNC			0x730
+#define L2X0_DUMMY_REG			0x740
 #define L2X0_INV_LINE_PA		0x770
 #define L2X0_INV_WAY			0x77C
 #define L2X0_CLEAN_LINE_PA		0x7B0
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index 721847d..e0d1c0c 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -58,6 +58,9 @@
 
 static inline void sysctl_soft_reset(void __iomem *base)
 {
+	/* switch to slow mode */
+	writel(0x2, base + SCCTRL);
+
 	/* writing any value to SCSYSSTAT reg will reset system */
 	writel(0, base + SCSYSSTAT);
 }
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index f41a6f5..82dfe5d 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -18,16 +18,34 @@
 #define __ASMARM_TLB_H
 
 #include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
 
 #ifndef CONFIG_MMU
 
 #include <linux/pagemap.h>
+
+#define tlb_flush(tlb)	((void) tlb)
+
 #include <asm-generic/tlb.h>
 
 #else /* !CONFIG_MMU */
 
+#include <linux/swap.h>
 #include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * We need to delay page freeing for SMP as other CPUs can access pages
+ * which have been removed but not yet had their TLB entries invalidated.
+ * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
+ * we need to apply this same delaying tactic to ensure correct operation.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
+#define tlb_fast_mode(tlb)	0
+#define FREE_PTE_NR		500
+#else
+#define tlb_fast_mode(tlb)	1
+#define FREE_PTE_NR		0
+#endif
 
 /*
  * TLB handling.  This allows us to remove pages from the page
@@ -36,12 +54,58 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	struct vm_area_struct	*vma;
 	unsigned long		range_start;
 	unsigned long		range_end;
+	unsigned int		nr;
+	struct page		*pages[FREE_PTE_NR];
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
 
+/*
+ * This is unnecessarily complex.  There's three ways the TLB shootdown
+ * code is used:
+ *  1. Unmapping a range of vmas.  See zap_page_range(), unmap_region().
+ *     tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
+ *     tlb->vma will be non-NULL.
+ *  2. Unmapping all vmas.  See exit_mmap().
+ *     tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
+ *     tlb->vma will be non-NULL.  Additionally, page tables will be freed.
+ *  3. Unmapping argument pages.  See shift_arg_pages().
+ *     tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
+ *     tlb->vma will be NULL.
+ */
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	if (tlb->fullmm || !tlb->vma)
+		flush_tlb_mm(tlb->mm);
+	else if (tlb->range_end > 0) {
+		flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
+}
+
+static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+	tlb_flush(tlb);
+	if (!tlb_fast_mode(tlb)) {
+		free_pages_and_swap_cache(tlb->pages, tlb->nr);
+		tlb->nr = 0;
+	}
+}
+
 static inline struct mmu_gather *
 tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
 {
@@ -49,6 +113,8 @@
 
 	tlb->mm = mm;
 	tlb->fullmm = full_mm_flush;
+	tlb->vma = NULL;
+	tlb->nr = 0;
 
 	return tlb;
 }
@@ -56,8 +122,7 @@
 static inline void
 tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 {
-	if (tlb->fullmm)
-		flush_tlb_mm(tlb->mm);
+	tlb_flush_mmu(tlb);
 
 	/* keep the page table cache within bounds */
 	check_pgt_cache();
@@ -71,12 +136,7 @@
 static inline void
 tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
 {
-	if (!tlb->fullmm) {
-		if (addr < tlb->range_start)
-			tlb->range_start = addr;
-		if (addr + PAGE_SIZE > tlb->range_end)
-			tlb->range_end = addr + PAGE_SIZE;
-	}
+	tlb_add_flush(tlb, addr);
 }
 
 /*
@@ -89,6 +149,7 @@
 {
 	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->vma = vma;
 		tlb->range_start = TASK_SIZE;
 		tlb->range_end = 0;
 	}
@@ -97,12 +158,30 @@
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm && tlb->range_end > 0)
-		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
+	if (!tlb->fullmm)
+		tlb_flush(tlb);
 }
 
-#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+	} else {
+		tlb->pages[tlb->nr++] = page;
+		if (tlb->nr >= FREE_PTE_NR)
+			tlb_flush_mmu(tlb);
+	}
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+	unsigned long addr)
+{
+	pgtable_page_dtor(pte);
+	tlb_add_flush(tlb, addr);
+	tlb_remove_page(tlb, pte);
+}
+
+#define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
 #define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index ce7378ea..d2005de 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -10,12 +10,7 @@
 #ifndef _ASMARM_TLBFLUSH_H
 #define _ASMARM_TLBFLUSH_H
 
-
-#ifndef CONFIG_MMU
-
-#define tlb_flush(tlb)	((void) tlb)
-
-#else /* CONFIG_MMU */
+#ifdef CONFIG_MMU
 
 #include <asm/glue.h>
 
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 2c1f005..8f6ed43 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1437,7 +1437,7 @@
 
 		return space_cccc_1100_010x(insn, asi);
 
-	} else if ((insn & 0x0e000000) == 0x0c400000) {
+	} else if ((insn & 0x0e000000) == 0x0c000000) {
 
 		return space_cccc_110x(insn, asi);
 
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index b8af96e..2c79eec 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -97,28 +97,34 @@
 			   irq, cpu);
 	return err;
 #else
-	return 0;
+	return -EINVAL;
 #endif
 }
 
 static int
 init_cpu_pmu(void)
 {
-	int i, err = 0;
+	int i, irqs, err = 0;
 	struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
 
-	if (!pdev) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (!pdev)
+		return -ENODEV;
 
-	for (i = 0; i < pdev->num_resources; ++i) {
+	irqs = pdev->num_resources;
+
+	/*
+	 * If we have a single PMU interrupt that we can't shift, assume that
+	 * we're running on a uniprocessor machine and continue.
+	 */
+	if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
+		return 0;
+
+	for (i = 0; i < irqs; ++i) {
 		err = set_irq_affinity(platform_get_irq(pdev, i), i);
 		if (err)
 			break;
 	}
 
-out:
 	return err;
 }
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 420b8d6..5ea4fb71 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -226,8 +226,8 @@
 		 * Register 0 and check for VMSAv7 or PMSAv7 */
 		asm("mrc	p15, 0, %0, c0, c1, 4"
 		    : "=r" (mmfr0));
-		if ((mmfr0 & 0x0000000f) == 0x00000003 ||
-		    (mmfr0 & 0x000000f0) == 0x00000030)
+		if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
+		    (mmfr0 & 0x000000f0) >= 0x00000030)
 			cpu_arch = CPU_ARCH_ARMv7;
 		else if ((mmfr0 & 0x0000000f) == 0x00000002 ||
 			 (mmfr0 & 0x000000f0) == 0x00000020)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 907d5a6..abaf844 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -474,7 +474,9 @@
 	unsigned long handler = (unsigned long)ka->sa.sa_handler;
 	unsigned long retcode;
 	int thumb = 0;
-	unsigned long cpsr = regs->ARM_cpsr & ~PSR_f;
+	unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT);
+
+	cpsr |= PSR_ENDSTATE;
 
 	/*
 	 * Maybe we need to deliver a 32-bit signal to a 26-bit task.
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 86b66f3..6146279 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -21,6 +21,12 @@
 #define ARM_CPU_KEEP(x)
 #endif
 
+#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
+#define ARM_EXIT_KEEP(x)	x
+#else
+#define ARM_EXIT_KEEP(x)
+#endif
+
 OUTPUT_ARCH(arm)
 ENTRY(stext)
 
@@ -43,6 +49,7 @@
 		_sinittext = .;
 			HEAD_TEXT
 			INIT_TEXT
+			ARM_EXIT_KEEP(EXIT_TEXT)
 		_einittext = .;
 		ARM_CPU_DISCARD(PROC_INFO)
 		__arch_info_begin = .;
@@ -67,6 +74,7 @@
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
+		ARM_EXIT_KEEP(EXIT_DATA)
 #endif
 	}
 
@@ -162,6 +170,7 @@
 		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
+		ARM_EXIT_KEEP(EXIT_DATA)
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
@@ -247,6 +256,8 @@
 	}
 #endif
 
+	NOTES
+
 	BSS_SECTION(0, 0, 0)
 	_end = .;
 
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a..058dab4 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p6442/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P6442_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM	0x20000000
 
-#define S5P6442_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0		0xC0B00000
+#define S5P6442_PA_I2S1		0xF2200000
 
-#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P6442_PA_CHIPID	0xE0000000
 
-#define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P6442_PA_SYSCON	0xE0100000
 
-#define S5P6442_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO		0xE0200000
+
+#define S5P6442_PA_VIC0		0xE4000000
+#define S5P6442_PA_VIC1		0xE4100000
+#define S5P6442_PA_VIC2		0xE4200000
+
+#define S5P6442_PA_SROMC	0xE7000000
 
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
 
-#define S5P6442_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6442_PA_TIMER
+#define S5P6442_PA_TIMER	0xEA000000
 
-#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+#define S5P6442_PA_SYSTIMER	0xEA100000
 
-#define S5P6442_PA_WATCHDOG	(0xEA200000)
+#define S5P6442_PA_WATCHDOG	0xEA200000
 
-#define S5P6442_PA_UART		(0xEC000000)
+#define S5P6442_PA_UART		0xEC000000
 
-#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART		SZ_256
-
-#define S5P6442_PA_IIC0		(0xEC100000)
-
-#define S5P6442_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0		0xEC100000
 
 #define S5P6442_PA_SPI		0xEC300000
 
-/* I2S */
-#define S5P6442_PA_I2S0		0xC0B00000
-#define S5P6442_PA_I2S1		0xF2200000
-
-/* PCM */
 #define S5P6442_PA_PCM0		0xF2400000
 #define S5P6442_PA_PCM1		0xF2500000
 
-/* compatibiltiy defines. */
-#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
-#define S3C_PA_UART		S5P6442_PA_UART
+/* Compatibiltiy Defines */
+
 #define S3C_PA_IIC		S5P6442_PA_IIC0
+#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART		S5P6442_PA_UART
+
+#define S5P_PA_UART(x)		(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0		S5P_PA_UART(0)
+#define S5P_PA_UART1		S5P_PA_UART(1)
+#define S5P_PA_UART2		S5P_PA_UART(2)
+
+#define S5P_SZ_UART		SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5..95c9125 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p64x0/include/mach/map.h
  *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * S5P64X0 - Memory map definitions
@@ -16,30 +16,63 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P64X0_PA_SDRAM	(0x20000000)
+#define S5P64X0_PA_SDRAM	0x20000000
 
-#define S5P64X0_PA_CHIPID	(0xE0000000)
+#define S5P64X0_PA_CHIPID	0xE0000000
+
+#define S5P64X0_PA_SYSCON	0xE0100000
+
+#define S5P64X0_PA_GPIO		0xE0308000
+
+#define S5P64X0_PA_VIC0		0xE4000000
+#define S5P64X0_PA_VIC1		0xE4100000
+
+#define S5P64X0_PA_SROMC	0xE7000000
+
+#define S5P64X0_PA_PDMA		0xE9000000
+
+#define S5P64X0_PA_TIMER	0xEA000000
+#define S5P64X0_PA_RTC		0xEA100000
+#define S5P64X0_PA_WDT		0xEA200000
+
+#define S5P6440_PA_IIC0		0xEC104000
+#define S5P6440_PA_IIC1		0xEC20F000
+#define S5P6450_PA_IIC0		0xEC100000
+#define S5P6450_PA_IIC1		0xEC200000
+
+#define S5P64X0_PA_SPI0		0xEC400000
+#define S5P64X0_PA_SPI1		0xEC500000
+
+#define S5P64X0_PA_HSOTG	0xED100000
+
+#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S		0xF2000000
+#define S5P6450_PA_I2S1		0xF2800000
+#define S5P6450_PA_I2S2		0xF2900000
+
+#define S5P64X0_PA_PCM		0xF2100000
+
+#define S5P64X0_PA_ADC		0xF3000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
+#define S3C_PA_RTC		S5P64X0_PA_RTC
+#define S3C_PA_WDT		S5P64X0_PA_WDT
+
 #define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO		(0xE0308000)
-
-#define S5P64X0_PA_VIC0		(0xE4000000)
-#define S5P64X0_PA_VIC1		(0xE4100000)
-
-#define S5P64X0_PA_SROMC	(0xE7000000)
 #define S5P_PA_SROMC		S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA		(0xE9000000)
-
-#define S5P64X0_PA_TIMER	(0xEA000000)
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
 #define S5P_PA_TIMER		S5P64X0_PA_TIMER
 
-#define S5P64X0_PA_RTC		(0xEA100000)
+#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
 
-#define S5P64X0_PA_WDT		(0xEA200000)
+/* UART */
 
 #define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
 #define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
@@ -53,36 +86,4 @@
 
 #define S5P_SZ_UART		SZ_256
 
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P6440_PA_IIC1		(0xEC20F000)
-#define S5P6450_PA_IIC0		(0xEC100000)
-#define S5P6450_PA_IIC1		(0xEC200000)
-
-#define S5P64X0_PA_SPI0		(0xEC400000)
-#define S5P64X0_PA_SPI1		(0xEC500000)
-
-#define S5P64X0_PA_HSOTG	(0xED100000)
-
-#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_I2S		(0xF2000000)
-#define S5P6450_PA_I2S1		0xF2800000
-#define S5P6450_PA_I2S2		0xF2900000
-
-#define S5P64X0_PA_PCM		(0xF2100000)
-
-#define S5P64X0_PA_ADC		(0xF3000000)
-
-/* compatibiltiy defines. */
-
-#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC		S5P6440_PA_IIC0
-#define S3C_PA_IIC1		S5P6440_PA_IIC1
-#define S3C_PA_RTC		S5P64X0_PA_RTC
-#define S3C_PA_WDT		S5P64X0_PA_WDT
-
-#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
-
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b..ccbe6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/include/mach/map.h
  *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -16,145 +19,115 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
- * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
- * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
- * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
- * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
- * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
- *
- */
+#define S5PC100_PA_SDRAM		0x20000000
 
-#define S5PC100_PA_ONENAND_BUF	(0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF	(SZ_256M - SZ_32M)
+#define S5PC100_PA_ONENAND		0xE7100000
+#define S5PC100_PA_ONENAND_BUF		0xB0000000
 
-/* Chip ID */
+#define S5PC100_PA_CHIPID		0xE0000000
 
-#define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
+#define S5PC100_PA_SYSCON		0xE0100000
 
-#define S5PC100_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
+#define S5PC100_PA_OTHERS		0xE0200000
 
-#define S5PC100_PA_OTHERS	(0xE0200000)
-#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_GPIO			0xE0300000
 
-#define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5PC100_PA_VIC0			0xE4000000
+#define S5PC100_PA_VIC1			0xE4100000
+#define S5PC100_PA_VIC2			0xE4200000
 
-/* Interrupt */
-#define S5PC100_PA_VIC0		(0xE4000000)
-#define S5PC100_PA_VIC1		(0xE4100000)
-#define S5PC100_PA_VIC2		(0xE4200000)
-#define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_SROMC		0xE7000000
 
-#define S5PC100_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5PC100_PA_SROMC
+#define S5PC100_PA_CFCON		0xE7800000
 
-#define S5PC100_PA_ONENAND	(0xE7100000)
+#define S5PC100_PA_MDMA			0xE8100000
+#define S5PC100_PA_PDMA0		0xE9000000
+#define S5PC100_PA_PDMA1		0xE9200000
 
-#define S5PC100_PA_CFCON	(0xE7800000)
+#define S5PC100_PA_TIMER		0xEA000000
+#define S5PC100_PA_SYSTIMER		0xEA100000
+#define S5PC100_PA_WATCHDOG		0xEA200000
+#define S5PC100_PA_RTC			0xEA300000
 
-/* DMA */
-#define S5PC100_PA_MDMA		(0xE8100000)
-#define S5PC100_PA_PDMA0	(0xE9000000)
-#define S5PC100_PA_PDMA1	(0xE9200000)
+#define S5PC100_PA_UART			0xEC000000
 
-/* Timer */
-#define S5PC100_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5PC100_PA_TIMER
+#define S5PC100_PA_IIC0			0xEC100000
+#define S5PC100_PA_IIC1			0xEC200000
 
-#define S5PC100_PA_SYSTIMER	(0xEA100000)
+#define S5PC100_PA_SPI0			0xEC300000
+#define S5PC100_PA_SPI1			0xEC400000
+#define S5PC100_PA_SPI2			0xEC500000
 
-#define S5PC100_PA_WATCHDOG	(0xEA200000)
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_USB_HSOTG		0xED200000
+#define S5PC100_PA_USB_HSPHY		0xED300000
 
-#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC100_PA_HSMMC(x)		(0xED800000 + ((x) * 0x100000))
 
-#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5PC100_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5PC100_PA_UART + 0xC00)
-#define S5P_SZ_UART		SZ_256
+#define S5PC100_PA_FB			0xEE000000
 
-#define S5PC100_PA_IIC0		(0xEC100000)
-#define S5PC100_PA_IIC1		(0xEC200000)
+#define S5PC100_PA_FIMC0		0xEE200000
+#define S5PC100_PA_FIMC1		0xEE300000
+#define S5PC100_PA_FIMC2		0xEE400000
 
-/* SPI */
-#define S5PC100_PA_SPI0		0xEC300000
-#define S5PC100_PA_SPI1		0xEC400000
-#define S5PC100_PA_SPI2		0xEC500000
+#define S5PC100_PA_I2S0			0xF2000000
+#define S5PC100_PA_I2S1			0xF2100000
+#define S5PC100_PA_I2S2			0xF2200000
 
-/* USB HS OTG */
-#define S5PC100_PA_USB_HSOTG	(0xED200000)
-#define S5PC100_PA_USB_HSPHY	(0xED300000)
+#define S5PC100_PA_AC97			0xF2300000
 
-#define S5PC100_PA_FB		(0xEE000000)
+#define S5PC100_PA_PCM0			0xF2400000
+#define S5PC100_PA_PCM1			0xF2500000
 
-#define S5PC100_PA_FIMC0	(0xEE200000)
-#define S5PC100_PA_FIMC1	(0xEE300000)
-#define S5PC100_PA_FIMC2	(0xEE400000)
+#define S5PC100_PA_SPDIF		0xF2600000
 
-#define S5PC100_PA_I2S0		(0xF2000000)
-#define S5PC100_PA_I2S1		(0xF2100000)
-#define S5PC100_PA_I2S2		(0xF2200000)
+#define S5PC100_PA_TSADC		0xF3000000
 
-#define S5PC100_PA_AC97		0xF2300000
+#define S5PC100_PA_KEYPAD		0xF3100000
 
-/* PCM */
-#define S5PC100_PA_PCM0		0xF2400000
-#define S5PC100_PA_PCM1		0xF2500000
+/* Compatibiltiy Defines */
 
-#define S5PC100_PA_SPDIF	0xF2600000
+#define S3C_PA_FB			S5PC100_PA_FB
+#define S3C_PA_HSMMC0			S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC			S5PC100_PA_IIC0
+#define S3C_PA_IIC1			S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD			S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND			S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF		S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC			S5PC100_PA_RTC
+#define S3C_PA_TSADC			S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG		S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY		S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT			S5PC100_PA_WATCHDOG
 
-#define S5PC100_PA_TSADC	(0xF3000000)
+#define S5P_PA_CHIPID			S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0			S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1			S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2			S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM			S5PC100_PA_SDRAM
+#define S5P_PA_SROMC			S5PC100_PA_SROMC
+#define S5P_PA_SYSCON			S5PC100_PA_SYSCON
+#define S5P_PA_TIMER			S5PC100_PA_TIMER
 
-/* KEYPAD */
-#define S5PC100_PA_KEYPAD	(0xF3100000)
+#define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
 
-#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
 
-#define S5PC100_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5PC100_PA_SDRAM
+#define S3C_SZ_ONENAND_BUF		(SZ_256M - SZ_32M)
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5PC100_PA_UART
-#define S3C_PA_IIC		S5PC100_PA_IIC0
-#define S3C_PA_IIC1		S5PC100_PA_IIC1
-#define S3C_PA_FB		S5PC100_PA_FB
-#define S3C_PA_G2D		S5PC100_PA_G2D
-#define S3C_PA_G3D		S5PC100_PA_G3D
-#define S3C_PA_JPEG		S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
-#define S5P_VA_VIC0		S5PC1XX_VA_VIC(0)
-#define S5P_VA_VIC1		S5PC1XX_VA_VIC(1)
-#define S5P_VA_VIC2		S5PC1XX_VA_VIC(2)
-#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
-#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
-#define S3C_PA_WDT		S5PC100_PA_WATCHDOG
-#define S3C_PA_TSADC		S5PC100_PA_TSADC
-#define S3C_PA_ONENAND		S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
-#define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
-#define S3C_PA_RTC		S5PC100_PA_RTC
+/* UART */
 
-#define SAMSUNG_PA_ADC		S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON	S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD	S5PC100_PA_KEYPAD
+#define S3C_PA_UART			S5PC100_PA_UART
 
-#define S5P_PA_FIMC0		S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1		S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2		S5PC100_PA_FIMC2
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
 
-#endif /* __ASM_ARCH_C100_MAP_H */
+#define S5P_SZ_UART			SZ_256
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 3611492..1dd5883 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5pv210/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5PV210 - Memory map definitions
@@ -16,122 +16,120 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5PV210_PA_SROM_BANK5	(0xA8000000)
+#define S5PV210_PA_SDRAM		0x20000000
 
-#define S5PC110_PA_ONENAND	(0xB0000000)
-#define S5P_PA_ONENAND		S5PC110_PA_ONENAND
+#define S5PV210_PA_SROM_BANK5		0xA8000000
 
-#define S5PC110_PA_ONENAND_DMA	(0xB0600000)
-#define S5P_PA_ONENAND_DMA	S5PC110_PA_ONENAND_DMA
+#define S5PC110_PA_ONENAND		0xB0000000
+#define S5PC110_PA_ONENAND_DMA		0xB0600000
 
-#define S5PV210_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5PV210_PA_CHIPID
+#define S5PV210_PA_CHIPID		0xE0000000
 
-#define S5PV210_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5PV210_PA_SYSCON
+#define S5PV210_PA_SYSCON		0xE0100000
 
-#define S5PV210_PA_GPIO		(0xE0200000)
+#define S5PV210_PA_GPIO			0xE0200000
 
-/* SPI */
-#define S5PV210_PA_SPI0		0xE1300000
-#define S5PV210_PA_SPI1		0xE1400000
+#define S5PV210_PA_SPDIF		0xE1100000
 
-#define S5PV210_PA_KEYPAD	(0xE1600000)
+#define S5PV210_PA_SPI0			0xE1300000
+#define S5PV210_PA_SPI1			0xE1400000
 
-#define S5PV210_PA_IIC0		(0xE1800000)
-#define S5PV210_PA_IIC1		(0xFAB00000)
-#define S5PV210_PA_IIC2		(0xE1A00000)
+#define S5PV210_PA_KEYPAD		0xE1600000
 
-#define S5PV210_PA_TIMER	(0xE2500000)
-#define S5P_PA_TIMER		S5PV210_PA_TIMER
+#define S5PV210_PA_ADC			0xE1700000
 
-#define S5PV210_PA_SYSTIMER	(0xE2600000)
+#define S5PV210_PA_IIC0			0xE1800000
+#define S5PV210_PA_IIC1			0xFAB00000
+#define S5PV210_PA_IIC2			0xE1A00000
 
-#define S5PV210_PA_WATCHDOG	(0xE2700000)
+#define S5PV210_PA_AC97			0xE2200000
 
-#define S5PV210_PA_RTC		(0xE2800000)
-#define S5PV210_PA_UART		(0xE2900000)
+#define S5PV210_PA_PCM0			0xE2300000
+#define S5PV210_PA_PCM1			0xE1200000
+#define S5PV210_PA_PCM2			0xE2B00000
 
-#define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5PV210_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5PV210_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5PV210_PA_UART + 0xC00)
+#define S5PV210_PA_TIMER		0xE2500000
+#define S5PV210_PA_SYSTIMER		0xE2600000
+#define S5PV210_PA_WATCHDOG		0xE2700000
+#define S5PV210_PA_RTC			0xE2800000
 
-#define S5P_SZ_UART		SZ_256
+#define S5PV210_PA_UART			0xE2900000
 
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5PV210_PA_SROMC		0xE8000000
 
-#define S5PV210_PA_SROMC	(0xE8000000)
-#define S5P_PA_SROMC		S5PV210_PA_SROMC
+#define S5PV210_PA_CFCON		0xE8200000
 
-#define S5PV210_PA_CFCON	(0xE8200000)
+#define S5PV210_PA_HSMMC(x)		(0xEB000000 + ((x) * 0x100000))
 
-#define S5PV210_PA_MDMA		0xFA200000
-#define S5PV210_PA_PDMA0	0xE0900000
-#define S5PV210_PA_PDMA1	0xE0A00000
+#define S5PV210_PA_HSOTG		0xEC000000
+#define S5PV210_PA_HSPHY		0xEC100000
 
-#define S5PV210_PA_FB		(0xF8000000)
+#define S5PV210_PA_IIS0			0xEEE30000
+#define S5PV210_PA_IIS1			0xE2100000
+#define S5PV210_PA_IIS2			0xE2A00000
 
-#define S5PV210_PA_FIMC0	(0xFB200000)
-#define S5PV210_PA_FIMC1	(0xFB300000)
-#define S5PV210_PA_FIMC2	(0xFB400000)
+#define S5PV210_PA_DMC0			0xF0000000
+#define S5PV210_PA_DMC1			0xF1400000
 
-#define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_VIC0			0xF2000000
+#define S5PV210_PA_VIC1			0xF2100000
+#define S5PV210_PA_VIC2			0xF2200000
+#define S5PV210_PA_VIC3			0xF2300000
 
-#define S5PV210_PA_HSOTG	(0xEC000000)
-#define S5PV210_PA_HSPHY	(0xEC100000)
+#define S5PV210_PA_FB			0xF8000000
 
-#define S5PV210_PA_VIC0		(0xF2000000)
-#define S5PV210_PA_VIC1		(0xF2100000)
-#define S5PV210_PA_VIC2		(0xF2200000)
-#define S5PV210_PA_VIC3		(0xF2300000)
+#define S5PV210_PA_MDMA			0xFA200000
+#define S5PV210_PA_PDMA0		0xE0900000
+#define S5PV210_PA_PDMA1		0xE0A00000
 
-#define S5PV210_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5PV210_PA_SDRAM
+#define S5PV210_PA_MIPI_CSIS		0xFA600000
 
-/* S/PDIF */
-#define S5PV210_PA_SPDIF	0xE1100000
+#define S5PV210_PA_FIMC0		0xFB200000
+#define S5PV210_PA_FIMC1		0xFB300000
+#define S5PV210_PA_FIMC2		0xFB400000
 
-/* I2S */
-#define S5PV210_PA_IIS0		0xEEE30000
-#define S5PV210_PA_IIS1		0xE2100000
-#define S5PV210_PA_IIS2		0xE2A00000
+/* Compatibiltiy Defines */
 
-/* PCM */
-#define S5PV210_PA_PCM0		0xE2300000
-#define S5PV210_PA_PCM1		0xE1200000
-#define S5PV210_PA_PCM2		0xE2B00000
+#define S3C_PA_FB			S5PV210_PA_FB
+#define S3C_PA_HSMMC0			S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3			S5PV210_PA_HSMMC(3)
+#define S3C_PA_IIC			S5PV210_PA_IIC0
+#define S3C_PA_IIC1			S5PV210_PA_IIC1
+#define S3C_PA_IIC2			S5PV210_PA_IIC2
+#define S3C_PA_RTC			S5PV210_PA_RTC
+#define S3C_PA_USB_HSOTG		S5PV210_PA_HSOTG
+#define S3C_PA_WDT			S5PV210_PA_WATCHDOG
 
-/* AC97 */
-#define S5PV210_PA_AC97		0xE2200000
+#define S5P_PA_CHIPID			S5PV210_PA_CHIPID
+#define S5P_PA_FIMC0			S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1			S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2			S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
+#define S5P_PA_ONENAND			S5PC110_PA_ONENAND
+#define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
+#define S5P_PA_SDRAM			S5PV210_PA_SDRAM
+#define S5P_PA_SROMC			S5PV210_PA_SROMC
+#define S5P_PA_SYSCON			S5PV210_PA_SYSCON
+#define S5P_PA_TIMER			S5PV210_PA_TIMER
 
-#define S5PV210_PA_ADC		(0xE1700000)
+#define SAMSUNG_PA_ADC			S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON		S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD		S5PV210_PA_KEYPAD
 
-#define S5PV210_PA_DMC0		(0xF0000000)
-#define S5PV210_PA_DMC1		(0xF1400000)
+/* UART */
 
-#define S5PV210_PA_MIPI_CSIS	0xFA600000
+#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5PV210_PA_UART
-#define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3		S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC		S5PV210_PA_IIC0
-#define S3C_PA_IIC1		S5PV210_PA_IIC1
-#define S3C_PA_IIC2		S5PV210_PA_IIC2
-#define S3C_PA_FB		S5PV210_PA_FB
-#define S3C_PA_RTC		S5PV210_PA_RTC
-#define S3C_PA_WDT		S5PV210_PA_WATCHDOG
-#define S3C_PA_USB_HSOTG	S5PV210_PA_HSOTG
-#define S5P_PA_FIMC0		S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1		S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2		S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0	S5PV210_PA_MIPI_CSIS
+#define S3C_PA_UART			S5PV210_PA_UART
 
-#define SAMSUNG_PA_ADC		S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD	S5PV210_PA_KEYPAD
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+
+#define S5P_SZ_UART			SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 461aa035..557add4 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -149,7 +149,7 @@
 
 static struct regulator_init_data aquila_ldo3_data = {
 	.constraints	= {
-		.name		= "VUSB/MIPI_1.1V",
+		.name		= "VUSB+MIPI_1.1V",
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
@@ -197,7 +197,7 @@
 
 static struct regulator_init_data aquila_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VADC_3.3V",
+		.name		= "VUSB+VADC_3.3V",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
@@ -207,7 +207,7 @@
 
 static struct regulator_init_data aquila_ldo9_data = {
 	.constraints	= {
-		.name		= "VCC/VCAM_2.8V",
+		.name		= "VCC+VCAM_2.8V",
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
@@ -381,9 +381,12 @@
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_max_voltage1 = 1200000,
-	.buck1_max_voltage2 = 1200000,
-	.buck2_max_voltage = 1200000,
+	.buck1_voltage1	= 1200000,
+	.buck1_voltage2	= 1200000,
+	.buck1_voltage3	= 1200000,
+	.buck1_voltage4	= 1200000,
+	.buck2_voltage1	= 1200000,
+	.buck2_voltage2	= 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e22d511..056f5c7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -288,7 +288,7 @@
 
 static struct regulator_init_data goni_ldo3_data = {
 	.constraints	= {
-		.name		= "VUSB/MIPI_1.1V",
+		.name		= "VUSB+MIPI_1.1V",
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
@@ -337,7 +337,7 @@
 
 static struct regulator_init_data goni_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VADC_3.3V",
+		.name		= "VUSB+VADC_3.3V",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
@@ -347,7 +347,7 @@
 
 static struct regulator_init_data goni_ldo9_data = {
 	.constraints	= {
-		.name		= "VCC/VCAM_2.8V",
+		.name		= "VCC+VCAM_2.8V",
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
@@ -521,9 +521,12 @@
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_max_voltage1 = 1200000,
-	.buck1_max_voltage2 = 1200000,
-	.buck2_max_voltage = 1200000,
+	.buck1_voltage1	= 1200000,
+	.buck1_voltage2	= 1200000,
+	.buck1_voltage3	= 1200000,
+	.buck1_voltage4	= 1200000,
+	.buck2_voltage1	= 1200000,
+	.buck2_voltage2	= 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 3060f78..901657f 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5pv310/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5PV310 - Memory map definitions
@@ -23,90 +23,43 @@
 
 #include <plat/map-s5p.h>
 
-#define S5PV310_PA_SYSRAM		(0x02025000)
+#define S5PV310_PA_SYSRAM		0x02025000
+
+#define S5PV310_PA_I2S0			0x03830000
+#define S5PV310_PA_I2S1			0xE3100000
+#define S5PV310_PA_I2S2			0xE2A00000
+
+#define S5PV310_PA_PCM0			0x03840000
+#define S5PV310_PA_PCM1			0x13980000
+#define S5PV310_PA_PCM2			0x13990000
 
 #define S5PV310_PA_SROM_BANK(x)		(0x04000000 + ((x) * 0x01000000))
 
-#define S5PC210_PA_ONENAND		(0x0C000000)
-#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+#define S5PC210_PA_ONENAND		0x0C000000
+#define S5PC210_PA_ONENAND_DMA		0x0C600000
 
-#define S5PC210_PA_ONENAND_DMA		(0x0C600000)
-#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+#define S5PV310_PA_CHIPID		0x10000000
 
-#define S5PV310_PA_CHIPID		(0x10000000)
-#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
+#define S5PV310_PA_SYSCON		0x10010000
+#define S5PV310_PA_PMU			0x10020000
+#define S5PV310_PA_CMU			0x10030000
 
-#define S5PV310_PA_SYSCON		(0x10010000)
-#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+#define S5PV310_PA_WATCHDOG		0x10060000
+#define S5PV310_PA_RTC			0x10070000
 
-#define S5PV310_PA_PMU			(0x10020000)
+#define S5PV310_PA_DMC0			0x10400000
 
-#define S5PV310_PA_CMU			(0x10030000)
+#define S5PV310_PA_COMBINER		0x10448000
 
-#define S5PV310_PA_WATCHDOG		(0x10060000)
-#define S5PV310_PA_RTC			(0x10070000)
+#define S5PV310_PA_COREPERI		0x10500000
+#define S5PV310_PA_GIC_CPU		0x10500100
+#define S5PV310_PA_TWD			0x10500600
+#define S5PV310_PA_GIC_DIST		0x10501000
+#define S5PV310_PA_L2CC			0x10502000
 
-#define S5PV310_PA_DMC0			(0x10400000)
-
-#define S5PV310_PA_COMBINER		(0x10448000)
-
-#define S5PV310_PA_COREPERI		(0x10500000)
-#define S5PV310_PA_GIC_CPU		(0x10500100)
-#define S5PV310_PA_TWD			(0x10500600)
-#define S5PV310_PA_GIC_DIST		(0x10501000)
-#define S5PV310_PA_L2CC			(0x10502000)
-
-/* DMA */
-#define S5PV310_PA_MDMA		0x10810000
-#define S5PV310_PA_PDMA0	0x12680000
-#define S5PV310_PA_PDMA1	0x12690000
-
-#define S5PV310_PA_GPIO1		(0x11400000)
-#define S5PV310_PA_GPIO2		(0x11000000)
-#define S5PV310_PA_GPIO3		(0x03860000)
-
-#define S5PV310_PA_MIPI_CSIS0		0x11880000
-#define S5PV310_PA_MIPI_CSIS1		0x11890000
-
-#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
-
-#define S5PV310_PA_SROMC		(0x12570000)
-#define S5P_PA_SROMC			S5PV310_PA_SROMC
-
-/* S/PDIF */
-#define S5PV310_PA_SPDIF	0xE1100000
-
-/* I2S */
-#define S5PV310_PA_I2S0		0x03830000
-#define S5PV310_PA_I2S1		0xE3100000
-#define S5PV310_PA_I2S2		0xE2A00000
-
-/* PCM */
-#define S5PV310_PA_PCM0		0x03840000
-#define S5PV310_PA_PCM1		0x13980000
-#define S5PV310_PA_PCM2		0x13990000
-
-/* AC97 */
-#define S5PV310_PA_AC97		0x139A0000
-
-#define S5PV310_PA_UART			(0x13800000)
-
-#define S5P_PA_UART(x)			(S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-#define S5P_PA_UART4			S5P_PA_UART(4)
-
-#define S5P_SZ_UART			SZ_256
-
-#define S5PV310_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
-
-#define S5PV310_PA_TIMER		(0x139D0000)
-#define S5P_PA_TIMER			S5PV310_PA_TIMER
-
-#define S5PV310_PA_SDRAM		(0x40000000)
-#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+#define S5PV310_PA_MDMA			0x10810000
+#define S5PV310_PA_PDMA0		0x12680000
+#define S5PV310_PA_PDMA1		0x12690000
 
 #define S5PV310_PA_SYSMMU_MDMA		0x10A40000
 #define S5PV310_PA_SYSMMU_SSS		0x10A50000
@@ -125,8 +78,31 @@
 #define S5PV310_PA_SYSMMU_MFC_L		0x13620000
 #define S5PV310_PA_SYSMMU_MFC_R		0x13630000
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART			S5PV310_PA_UART
+#define S5PV310_PA_GPIO1		0x11400000
+#define S5PV310_PA_GPIO2		0x11000000
+#define S5PV310_PA_GPIO3		0x03860000
+
+#define S5PV310_PA_MIPI_CSIS0		0x11880000
+#define S5PV310_PA_MIPI_CSIS1		0x11890000
+
+#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC		0x12570000
+
+#define S5PV310_PA_UART			0x13800000
+
+#define S5PV310_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_AC97			0x139A0000
+
+#define S5PV310_PA_TIMER		0x139D0000
+
+#define S5PV310_PA_SDRAM		0x40000000
+
+#define S5PV310_PA_SPDIF		0xE1100000
+
+/* Compatibiltiy Defines */
+
 #define S3C_PA_HSMMC0			S5PV310_PA_HSMMC(0)
 #define S3C_PA_HSMMC1			S5PV310_PA_HSMMC(1)
 #define S3C_PA_HSMMC2			S5PV310_PA_HSMMC(2)
@@ -141,7 +117,28 @@
 #define S3C_PA_IIC7			S5PV310_PA_IIC(7)
 #define S3C_PA_RTC			S5PV310_PA_RTC
 #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+
+#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
 #define S5P_PA_MIPI_CSIS0		S5PV310_PA_MIPI_CSIS0
 #define S5P_PA_MIPI_CSIS1		S5PV310_PA_MIPI_CSIS1
+#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+#define S5P_PA_SROMC			S5PV310_PA_SROMC
+#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+#define S5P_PA_TIMER			S5PV310_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART			S5PV310_PA_UART
+
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+#define S5P_PA_UART4			S5P_PA_UART(4)
+
+#define S5P_SZ_UART			SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
index cacf17a..53677e4 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -62,7 +62,7 @@
 #define SPEAR320_SMII1_BASE		0xAB000000
 #define SPEAR320_SMII1_SIZE		0x01000000
 
-#define SPEAR320_SOC_CONFIG_BASE	0xB4000000
+#define SPEAR320_SOC_CONFIG_BASE	0xB3000000
 #define SPEAR320_SOC_CONFIG_SIZE	0x00000070
 /* Interrupt registers offsets and masks */
 #define INT_STS_MASK_REG		0x04
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 66ad276..04c7798 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -57,5 +57,6 @@
 	const struct matrix_keymap_data *keymap_data;
 
 	bool wakeup;
+	bool use_fn_map;
 };
 #endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 170c9bb..f2ce38e 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -49,7 +49,13 @@
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
+
+#ifdef CONFIG_ARM_ERRATA_753970
+	/* write to an unmmapped register */
+	writel_relaxed(0, base + L2X0_DUMMY_REG);
+#else
 	writel_relaxed(0, base + L2X0_CACHE_SYNC);
+#endif
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0c1172b..8e33562 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -264,6 +264,12 @@
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_751472
+	cmp	r6, #0x30			@ present prior to r3p0
+	mrclt	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrlt	r10, r10, #1 << 11		@ set bit #11
+	mcrlt	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
 3:	mov	r10, #0
 #ifdef HARVARD_CACHE
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a73428..afaf87f 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
 static struct resource s5p_uart0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART0,
-		.end	= S5P_PA_UART0 + S5P_SZ_UART,
+		.end	= S5P_PA_UART0 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -51,7 +51,7 @@
 static struct resource s5p_uart1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART1,
-		.end	= S5P_PA_UART1 + S5P_SZ_UART,
+		.end	= S5P_PA_UART1 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -74,7 +74,7 @@
 static struct resource s5p_uart2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART2,
-		.end	= S5P_PA_UART2 + S5P_SZ_UART,
+		.end	= S5P_PA_UART2 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -98,7 +98,7 @@
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
 	[0] = {
 		.start	= S5P_PA_UART3,
-		.end	= S5P_PA_UART3 + S5P_SZ_UART,
+		.end	= S5P_PA_UART3 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -123,7 +123,7 @@
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 4
 	[0] = {
 		.start	= S5P_PA_UART4,
-		.end	= S5P_PA_UART4 + S5P_SZ_UART,
+		.end	= S5P_PA_UART4 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -148,7 +148,7 @@
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 5
 	[0] = {
 		.start	= S5P_PA_UART5,
-		.end	= S5P_PA_UART5 + S5P_SZ_UART,
+		.end	= S5P_PA_UART5 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 236ef84..3e4bd81 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -58,4 +58,3 @@
 
 	s3c_device_ts.dev.platform_data = npd;
 }
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 99ba678..6dd455b 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -24,10 +24,10 @@
 {
 	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
 
-	while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+	while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
 		barrier();
 
-	writel(c, base + UART01x_DR);
+	writel_relaxed(c, base + UART01x_DR);
 }
 
 static inline void flush(void)
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
index 09e9372..8c8b24d 100644
--- a/arch/arm/plat-spear/include/plat/vmalloc.h
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -14,6 +14,6 @@
 #ifndef __PLAT_VMALLOC_H
 #define __PLAT_VMALLOC_H
 
-#define VMALLOC_END		0xF0000000
+#define VMALLOC_END		0xF0000000UL
 
 #endif /* __PLAT_VMALLOC_H */
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 4422189..c49be84 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -72,11 +72,6 @@
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	.init.data : { INIT_DATA }
 	.init.setup : { INIT_SETUP(16) }
-#ifdef CONFIG_ETRAX_ARCH_V32
-	__start___param = .;
-	__param : { *(__param) }
-	__stop___param = .;
-#endif
 	.initcall.init : {
 		INIT_CALLS
 	}
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1..2751b3a 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@
 	unsigned long output_addr;
 	unsigned char *output;
 
-	check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+	output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+	check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
 	memset(&_bss, 0, &_ebss - &_bss);
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+	output = (unsigned char *) output_addr;
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea1..5c5ba10 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
 
 static inline int atomic_read(const atomic_t *v)
 {
-	barrier();
-	return v->counter;
+	int c;
+
+	asm volatile(
+		"	l	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic_set(atomic_t *v, int i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	st	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@
 
 static inline long long atomic64_read(const atomic64_t *v)
 {
-	barrier();
-	return v->counter;
+	long long c;
+
+	asm volatile(
+		"	lg	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic64_set(atomic64_t *v, long long i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	stg	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa6..2a30d5a 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
 
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
+#define NET_SKB_PAD	   32
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index e2f6a99..cc29086 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -22,6 +22,7 @@
 
 #define ARCH_P4_CNTRVAL_BITS	(40)
 #define ARCH_P4_CNTRVAL_MASK	((1ULL << ARCH_P4_CNTRVAL_BITS) - 1)
+#define ARCH_P4_UNFLAGGED_BIT	((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1))
 
 #define P4_ESCR_EVENT_MASK	0x7e000000U
 #define P4_ESCR_EVENT_SHIFT	25
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index f7a0993..ff751a9 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -770,9 +770,14 @@
 		return 1;
 	}
 
-	/* it might be unflagged overflow */
-	rdmsrl(hwc->event_base + hwc->idx, v);
-	if (!(v & ARCH_P4_CNTRVAL_MASK))
+	/*
+	 * In some circumstances the overflow might issue an NMI but did
+	 * not set P4_CCCR_OVF bit. Because a counter holds a negative value
+	 * we simply check for high bit being set, if it's cleared it means
+	 * the counter has reached zero value and continued counting before
+	 * real NMI signal was received:
+	 */
+	if (!(v & ARCH_P4_UNFLAGGED_BIT))
 		return 1;
 
 	return 0;
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 9252e85..780498d 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -773,18 +773,23 @@
 #else
 			printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
 #endif
+			pci_unregister_driver(&agp_amd64_pci_driver);
 			return -ENODEV;
 		}
 
 		/* First check that we have at least one AMD64 NB */
-		if (!pci_dev_present(amd_nb_misc_ids))
+		if (!pci_dev_present(amd_nb_misc_ids)) {
+			pci_unregister_driver(&agp_amd64_pci_driver);
 			return -ENODEV;
+		}
 
 		/* Look for any AGP bridge */
 		agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table;
 		err = driver_attach(&agp_amd64_pci_driver.driver);
-		if (err == 0 && agp_bridges_found == 0)
+		if (err == 0 && agp_bridges_found == 0) {
+			pci_unregister_driver(&agp_amd64_pci_driver);
 			err = -ENODEV;
+		}
 	}
 	return err;
 }
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 777181a..bcbbc71 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -830,8 +830,7 @@
 			    test_bit(IS_ANY_T1, &dev->flags))) {
 				DEBUGP(4, dev, "Perform AUTOPPS\n");
 				set_bit(IS_AUTOPPS_ACT, &dev->flags);
-				ptsreq.protocol = ptsreq.protocol =
-				    (0x01 << dev->proto);
+				ptsreq.protocol = (0x01 << dev->proto);
 				ptsreq.flags = 0x01;
 				ptsreq.pts1 = 0x00;
 				ptsreq.pts2 = 0x00;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 94b8eb4..444155a 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -78,7 +78,6 @@
 static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data)
 {
 	struct ipw_dev *ipw = priv_data;
-	struct resource *io_resource;
 	int ret;
 
 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -92,9 +91,12 @@
 	if (ret)
 		return ret;
 
-	io_resource = request_region(p_dev->resource[0]->start,
-				resource_size(p_dev->resource[0]),
-				IPWIRELESS_PCCARD_NAME);
+	if (!request_region(p_dev->resource[0]->start,
+			    resource_size(p_dev->resource[0]),
+			    IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit;
+	}
 
 	p_dev->resource[2]->flags |=
 		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
@@ -105,22 +107,25 @@
 
 	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr);
 	if (ret != 0)
-		goto exit2;
+		goto exit1;
 
 	ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100;
 
-	ipw->attr_memory = ioremap(p_dev->resource[2]->start,
+	ipw->common_memory = ioremap(p_dev->resource[2]->start,
 				resource_size(p_dev->resource[2]));
-	request_mem_region(p_dev->resource[2]->start,
-			resource_size(p_dev->resource[2]),
-			IPWIRELESS_PCCARD_NAME);
+	if (!request_mem_region(p_dev->resource[2]->start,
+				resource_size(p_dev->resource[2]),
+				IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit2;
+	}
 
 	p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM |
 					WIN_ENABLE;
 	p_dev->resource[3]->end = 0; /* this used to be 0x1000 */
 	ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0);
 	if (ret != 0)
-		goto exit2;
+		goto exit3;
 
 	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0);
 	if (ret != 0)
@@ -128,23 +133,28 @@
 
 	ipw->attr_memory = ioremap(p_dev->resource[3]->start,
 				resource_size(p_dev->resource[3]));
-	request_mem_region(p_dev->resource[3]->start,
-			resource_size(p_dev->resource[3]),
-			IPWIRELESS_PCCARD_NAME);
+	if (!request_mem_region(p_dev->resource[3]->start,
+				resource_size(p_dev->resource[3]),
+				IPWIRELESS_PCCARD_NAME)) {
+		ret = -EBUSY;
+		goto exit4;
+	}
 
 	return 0;
 
+exit4:
+	iounmap(ipw->attr_memory);
 exit3:
+	release_mem_region(p_dev->resource[2]->start,
+			resource_size(p_dev->resource[2]));
 exit2:
-	if (ipw->common_memory) {
-		release_mem_region(p_dev->resource[2]->start,
-				resource_size(p_dev->resource[2]));
-		iounmap(ipw->common_memory);
-	}
+	iounmap(ipw->common_memory);
 exit1:
-	release_resource(io_resource);
+	release_region(p_dev->resource[0]->start,
+		       resource_size(p_dev->resource[0]));
+exit:
 	pcmcia_disable_device(p_dev);
-	return -1;
+	return ret;
 }
 
 static int config_ipwireless(struct ipw_dev *ipw)
@@ -219,6 +229,8 @@
 
 static void release_ipwireless(struct ipw_dev *ipw)
 {
+	release_region(ipw->link->resource[0]->start,
+		       resource_size(ipw->link->resource[0]));
 	if (ipw->common_memory) {
 		release_mem_region(ipw->link->resource[2]->start,
 				resource_size(ipw->link->resource[2]));
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c..36e0fa1 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -577,11 +577,9 @@
 	if (rc)
 		return;
 
-	if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
-	    be32_to_cpu(tpm_cmd.header.out.length)
-	    != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+	if (be32_to_cpu(tpm_cmd.header.out.return_code)
+	    != 3 * sizeof(u32))
 		return;
-
 	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
 	chip->vendor.duration[TPM_SHORT] =
 	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
 
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%d %d %d\n",
-	               jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff77..72ddb03 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@
 				char *);
 extern ssize_t tpm_show_temp_deactivated(struct device *,
 					 struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
-				 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e..dd21df5 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@
 		   NULL);
 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
 
 static struct attribute *tis_attrs[] = {
 	&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@
 	&dev_attr_owned.attr,
 	&dev_attr_temp_deactivated.attr,
 	&dev_attr_caps.attr,
-	&dev_attr_cancel.attr,
-	&dev_attr_timeouts.attr, NULL,
+	&dev_attr_cancel.attr, NULL,
 };
 
 static struct attribute_group tis_attr_grp = {
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3dadfa2..53120a7 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -164,8 +164,10 @@
 	 * available. In that case we can't account for this and just
 	 * hope for the best.
 	 */
-	if ((vblrc > 0) && (abs(diff_ns) > 1000000))
+	if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) {
 		atomic_inc(&dev->_vblank_count[crtc]);
+		smp_mb__after_atomic_inc();
+	}
 
 	/* Invalidate all timestamps while vblank irq's are off. */
 	clear_vblank_timestamps(dev, crtc);
@@ -491,6 +493,12 @@
 	/* Dot clock in Hz: */
 	dotclock = (u64) crtc->hwmode.clock * 1000;
 
+	/* Fields of interlaced scanout modes are only halve a frame duration.
+	 * Double the dotclock to get halve the frame-/line-/pixelduration.
+	 */
+	if (crtc->hwmode.flags & DRM_MODE_FLAG_INTERLACE)
+		dotclock *= 2;
+
 	/* Valid dotclock? */
 	if (dotclock > 0) {
 		/* Convert scanline length in pixels and video dot clock to
@@ -603,14 +611,6 @@
 		return -EAGAIN;
 	}
 
-	/* Don't know yet how to handle interlaced or
-	 * double scan modes. Just no-op for now.
-	 */
-	if (mode->flags & (DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLSCAN)) {
-		DRM_DEBUG("crtc %d: Noop due to unsupported mode.\n", crtc);
-		return -ENOTSUPP;
-	}
-
 	/* Get current scanout position with system timestamp.
 	 * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times
 	 * if single query takes longer than max_error nanoseconds.
@@ -858,10 +858,11 @@
 	if (rc) {
 		tslot = atomic_read(&dev->_vblank_count[crtc]) + diff;
 		vblanktimestamp(dev, crtc, tslot) = t_vblank;
-		smp_wmb();
 	}
 
+	smp_mb__before_atomic_inc();
 	atomic_add(diff, &dev->_vblank_count[crtc]);
+	smp_mb__after_atomic_inc();
 }
 
 /**
@@ -1293,15 +1294,16 @@
 	 * e.g., due to spurious vblank interrupts. We need to
 	 * ignore those for accounting.
 	 */
-	if (abs(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
+	if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
 		/* Store new timestamp in ringbuffer. */
 		vblanktimestamp(dev, crtc, vblcount + 1) = tvblank;
-		smp_wmb();
 
 		/* Increment cooked vblank count. This also atomically commits
 		 * the timestamp computed above.
 		 */
+		smp_mb__before_atomic_inc();
 		atomic_inc(&dev->_vblank_count[crtc]);
+		smp_mb__after_atomic_inc();
 	} else {
 		DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n",
 			  crtc, (int) diff_ns);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15d94c63..729d423 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,17 +1553,7 @@
 
 /* Backlight control */
 #define BLC_PWM_CTL		0x61254
-#define   BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
 #define BLC_PWM_CTL2		0x61250 /* 965+ only */
-#define   BLM_COMBINATION_MODE (1 << 30)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define   BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
-#define   BLM_LEGACY_MODE				(1 << 16)
 /*
  * This is the number of cycles out of the backlight modulation cycle for which
  * the backlight is on.
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index c65992d..d860abe 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -30,8 +30,6 @@
 
 #include "intel_drv.h"
 
-#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
-
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -112,19 +110,6 @@
 	dev_priv->pch_pf_size = (width << 16) | height;
 }
 
-static int is_backlight_combination_mode(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
-
-	if (IS_GEN2(dev))
-		return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
-
-	return 0;
-}
-
 static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 {
 	u32 val;
@@ -181,9 +166,6 @@
 			if (INTEL_INFO(dev)->gen < 4)
 				max &= ~1;
 		}
-
-		if (is_backlight_combination_mode(dev))
-			max *= 0xff;
 	}
 
 	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
@@ -201,15 +183,6 @@
 		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 		if (IS_PINEVIEW(dev))
 			val >>= 1;
-
-		if (is_backlight_combination_mode(dev)){
-			u8 lbpc;
-
-			val &= ~1;
-			pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
-			val *= lbpc;
-			val >>= 1;
-		}
 	}
 
 	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
@@ -232,16 +205,6 @@
 
 	if (HAS_PCH_SPLIT(dev))
 		return intel_pch_panel_set_backlight(dev, level);
-
-	if (is_backlight_combination_mode(dev)){
-		u32 max = intel_panel_get_max_backlight(dev);
-		u8 lpbc;
-
-		lpbc = level * 0xfe / max + 1;
-		level /= lpbc;
-		pci_write_config_byte(dev->pdev, PCI_LBPC, lpbc);
-	}
-
 	tmp = I915_READ(BLC_PWM_CTL);
 	if (IS_PINEVIEW(dev)) {
 		tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 56deae5..93fa735 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3490,7 +3490,7 @@
 		track->num_texture = 16;
 		track->maxy = 4096;
 		track->separate_cube = 0;
-		track->aaresolve = true;
+		track->aaresolve = false;
 		track->aa.robj = NULL;
 	}
 
@@ -3801,8 +3801,6 @@
 	r100_mc_program(rdev);
 	/* Resume clock */
 	r100_clock_startup(rdev);
-	/* Initialize GPU configuration (# pipes, ...) */
-//	r100_gpu_init(rdev);
 	/* Initialize GART (initialize after TTM so we can allocate
 	 * memory through TTM but finalize after TTM) */
 	r100_enable_bm(rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0e65709..3e7e7f9e 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -971,7 +971,7 @@
 		max_fractional_feed_div = pll->max_frac_feedback_div;
 	}
 
-	for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
+	for (post_div = max_post_div; post_div >= min_post_div; --post_div) {
 		uint32_t ref_div;
 
 		if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 66324b5..cc44bdf 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -113,11 +113,14 @@
 	u32 tiling_flags = 0;
 	int ret;
 	int aligned_size, size;
+	int height = mode_cmd->height;
 
 	/* need to align pitch with crtc limits */
 	mode_cmd->pitch = radeon_align_pitch(rdev, mode_cmd->width, mode_cmd->bpp, fb_tiled) * ((mode_cmd->bpp + 1) / 8);
 
-	size = mode_cmd->pitch * mode_cmd->height;
+	if (rdev->family >= CHIP_R600)
+		height = ALIGN(mode_cmd->height, 8);
+	size = mode_cmd->pitch * height;
 	aligned_size = ALIGN(size, PAGE_SIZE);
 	ret = radeon_gem_object_create(rdev, aligned_size, 0,
 				       RADEON_GEM_DOMAIN_VRAM,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484..297bc9a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
-	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 	depends on X86 && PCI
 	help
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
-	  the AMD Family 10h and all revisions of the AMD Family 11h
-	  microarchitectures.
+	  the AMD Family 10h and all revisions of the AMD Family 11h,
+	  12h (Llano), and 14h (Brazos) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -455,13 +455,14 @@
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
-	tristate "JEDEC JC42.4 compliant temperature sensors"
+	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
 	help
-	  If you say yes here you get support for Jedec JC42.4 compliant
-	  temperature sensors. Support will include, but not be limited to,
-	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+	  If you say yes here, you get support for JEDEC JC42.4 compliant
+	  temperature sensors, which are used on many DDR3 memory modules for
+	  mobile devices and servers.  Support will include, but not be limited
+	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
@@ -574,7 +575,7 @@
 	help
 	  If you say yes here you get support for National Semiconductor LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-	  EMC6D101 and EMC6D102.
+	  EMC6D101, EMC6D102, and EMC6D103.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78..9349912 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@
 
 /* Configuration register defines */
 #define JC42_CFG_CRIT_ONLY	(1 << 2)
+#define JC42_CFG_TCRIT_LOCK	(1 << 6)
+#define JC42_CFG_EVENT_LOCK	(1 << 7)
 #define JC42_CFG_SHUTDOWN	(1 << 8)
 #define JC42_CFG_HYST_SHIFT	9
 #define JC42_CFG_HYST_MASK	0x03
@@ -332,7 +334,7 @@
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct jc42_data *data = i2c_get_clientdata(client);
-	long val;
+	unsigned long val;
 	int diff, hyst;
 	int err;
 	int ret = count;
@@ -380,14 +382,14 @@
 
 static DEVICE_ATTR(temp1_input, S_IRUGO,
 		   show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
 		   show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
 		   show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
 		   show_temp_max, set_temp_max);
 
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
 		   show_temp_crit_hyst, set_temp_crit_hyst);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
 		   show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@
 	NULL
 };
 
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	unsigned int config = data->config;
+	bool readonly;
+
+	if (attr == &dev_attr_temp1_crit.attr)
+		readonly = config & JC42_CFG_TCRIT_LOCK;
+	else if (attr == &dev_attr_temp1_min.attr ||
+		 attr == &dev_attr_temp1_max.attr)
+		readonly = config & JC42_CFG_EVENT_LOCK;
+	else if (attr == &dev_attr_temp1_crit_hyst.attr)
+		readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+	else
+		readonly = true;
+
+	return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
 static const struct attribute_group jc42_group = {
 	.attrs = jc42_attributes,
+	.is_visible = jc42_attribute_mode,
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a240..82bf65a 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
 /*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <asm/processor.h>
 
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL");
 
@@ -208,6 +208,7 @@
 static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e22984..d2cc286 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@
 enum chips {
 	any_chip, lm85b, lm85c,
 	adm1027, adt7463, adt7468,
-	emc6d100, emc6d102
+	emc6d100, emc6d102, emc6d103
 };
 
 /* The LM85 registers */
@@ -90,6 +90,9 @@
 #define	LM85_VERSTEP_EMC6D100_A0        0x60
 #define	LM85_VERSTEP_EMC6D100_A1        0x61
 #define	LM85_VERSTEP_EMC6D102		0x65
+#define	LM85_VERSTEP_EMC6D103_A0	0x68
+#define	LM85_VERSTEP_EMC6D103_A1	0x69
+#define	LM85_VERSTEP_EMC6D103S		0x6A	/* Also known as EMC6D103:A2 */
 
 #define	LM85_REG_CONFIG			0x40
 
@@ -348,6 +351,7 @@
 	{ "emc6d100", emc6d100 },
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
+	{ "emc6d103", emc6d103 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@
 		case LM85_VERSTEP_EMC6D102:
 			type_name = "emc6d102";
 			break;
+		case LM85_VERSTEP_EMC6D103_A0:
+		case LM85_VERSTEP_EMC6D103_A1:
+			type_name = "emc6d103";
+			break;
+		/*
+		 * Registers apparently missing in EMC6D103S/EMC6D103:A2
+		 * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+		 * (according to the data sheets), but used unconditionally
+		 * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+		 * So skip EMC6D103S for now.
+		case LM85_VERSTEP_EMC6D103S:
+			type_name = "emc6d103s";
+			break;
+		 */
 		}
 	} else {
 		dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@
 	case adt7468:
 	case emc6d100:
 	case emc6d102:
+	case emc6d103:
 		data->freq_map = adm1027_freq_map;
 		break;
 	default:
@@ -1468,7 +1487,7 @@
 			/* More alarm bits */
 			data->alarms |= lm85_read_value(client,
 						EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102) {
+		} else if (data->type == emc6d102 || data->type == emc6d103) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b605ff3..829a2a1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -847,11 +847,15 @@
 			dev_err(dev->dev, "Arbitration lost\n");
 			err |= OMAP_I2C_STAT_AL;
 		}
+		/*
+		 * ProDB0017052: Clear ARDY bit twice
+		 */
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 					OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, stat &
 				(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
-				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
+				OMAP_I2C_STAT_ARDY));
 			omap_i2c_complete_cmd(dev, err);
 			return IRQ_HANDLED;
 		}
@@ -1137,12 +1141,41 @@
 	return 0;
 }
 
+#ifdef CONFIG_SUSPEND
+static int omap_i2c_suspend(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+			dev->bus->pm->runtime_suspend(dev);
+
+	return 0;
+}
+
+static int omap_i2c_resume(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+			dev->bus->pm->runtime_resume(dev);
+
+	return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+	.suspend = omap_i2c_suspend,
+	.resume = omap_i2c_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
+		.pm	= OMAP_I2C_PM_OPS,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 495be45..266135d 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -942,7 +942,7 @@
 	adap->owner = THIS_MODULE;
 	/* DDC class but actually often used for more generic I2C */
 	adap->class = I2C_CLASS_DDC;
-	strncpy(adap->name, "ST Microelectronics DDC I2C adapter",
+	strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
 		sizeof(adap->name));
 	adap->nr = bus_nr;
 	adap->algo = &stu300_algo;
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 23cf8fc..5b8f59d 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -360,7 +360,7 @@
 	event->owner = owner;
 
 	list_add_tail(&event->node, &gameport_event_list);
-	schedule_work(&gameport_event_work);
+	queue_work(system_long_wq, &gameport_event_work);
 
 out:
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index ac471b7..99ce903 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -71,8 +71,9 @@
 	spinlock_t lock;
 	unsigned int repoll_dly;
 	unsigned long cp_dly_jiffies;
+	bool use_fn_map;
 	const struct tegra_kbc_platform_data *pdata;
-	unsigned short keycode[KBC_MAX_KEY];
+	unsigned short keycode[KBC_MAX_KEY * 2];
 	unsigned short current_keys[KBC_MAX_KPENT];
 	unsigned int num_pressed_keys;
 	struct timer_list timer;
@@ -178,6 +179,40 @@
 	KEY(15, 5, KEY_F2),
 	KEY(15, 6, KEY_CAPSLOCK),
 	KEY(15, 7, KEY_F6),
+
+	/* Software Handled Function Keys */
+	KEY(20, 0, KEY_KP7),
+
+	KEY(21, 0, KEY_KP9),
+	KEY(21, 1, KEY_KP8),
+	KEY(21, 2, KEY_KP4),
+	KEY(21, 4, KEY_KP1),
+
+	KEY(22, 1, KEY_KPSLASH),
+	KEY(22, 2, KEY_KP6),
+	KEY(22, 3, KEY_KP5),
+	KEY(22, 4, KEY_KP3),
+	KEY(22, 5, KEY_KP2),
+	KEY(22, 7, KEY_KP0),
+
+	KEY(27, 1, KEY_KPASTERISK),
+	KEY(27, 3, KEY_KPMINUS),
+	KEY(27, 4, KEY_KPPLUS),
+	KEY(27, 5, KEY_KPDOT),
+
+	KEY(28, 5, KEY_VOLUMEUP),
+
+	KEY(29, 3, KEY_HOME),
+	KEY(29, 4, KEY_END),
+	KEY(29, 5, KEY_BRIGHTNESSDOWN),
+	KEY(29, 6, KEY_VOLUMEDOWN),
+	KEY(29, 7, KEY_BRIGHTNESSUP),
+
+	KEY(30, 0, KEY_NUMLOCK),
+	KEY(30, 1, KEY_SCROLLLOCK),
+	KEY(30, 2, KEY_MUTE),
+
+	KEY(31, 4, KEY_HELP),
 };
 
 static const struct matrix_keymap_data tegra_kbc_default_keymap_data = {
@@ -224,6 +259,7 @@
 	unsigned int i;
 	unsigned int num_down = 0;
 	unsigned long flags;
+	bool fn_keypress = false;
 
 	spin_lock_irqsave(&kbc->lock, flags);
 	for (i = 0; i < KBC_MAX_KPENT; i++) {
@@ -237,11 +273,28 @@
 				MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);
 
 			scancodes[num_down] = scancode;
-			keycodes[num_down++] = kbc->keycode[scancode];
+			keycodes[num_down] = kbc->keycode[scancode];
+			/* If driver uses Fn map, do not report the Fn key. */
+			if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
+				fn_keypress = true;
+			else
+				num_down++;
 		}
 
 		val >>= 8;
 	}
+
+	/*
+	 * If the platform uses Fn keymaps, translate keys on a Fn keypress.
+	 * Function keycodes are KBC_MAX_KEY apart from the plain keycodes.
+	 */
+	if (fn_keypress) {
+		for (i = 0; i < num_down; i++) {
+			scancodes[i] += KBC_MAX_KEY;
+			keycodes[i] = kbc->keycode[scancodes[i]];
+		}
+	}
+
 	spin_unlock_irqrestore(&kbc->lock, flags);
 
 	tegra_kbc_report_released_keys(kbc->idev,
@@ -594,8 +647,11 @@
 
 	input_dev->keycode = kbc->keycode;
 	input_dev->keycodesize = sizeof(kbc->keycode[0]);
-	input_dev->keycodemax = ARRAY_SIZE(kbc->keycode);
+	input_dev->keycodemax = KBC_MAX_KEY;
+	if (pdata->use_fn_map)
+		input_dev->keycodemax *= 2;
 
+	kbc->use_fn_map = pdata->use_fn_map;
 	keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
 	matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
 				   input_dev->keycode, input_dev->keybit);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 25e5d04..7453938 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,6 +51,29 @@
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
+
+/*
+ * The following describes response for the 0x0c query.
+ *
+ * byte	mask	name			meaning
+ * ----	----	-------			------------
+ * 1	0x01	adjustable threshold	capacitive button sensitivity
+ *					can be adjusted
+ * 1	0x02	report max		query 0x0d gives max coord reported
+ * 1	0x04	clearpad		sensor is ClearPad product
+ * 1	0x08	advanced gesture	not particularly meaningful
+ * 1	0x10	clickpad bit 0		1-button ClickPad
+ * 1	0x60	multifinger mode	identifies firmware finger counting
+ *					(not reporting!) algorithm.
+ *					Not particularly meaningful
+ * 1	0x80    covered pad		W clipped to 14, 15 == pad mostly covered
+ * 2	0x01    clickpad bit 1		2-button ClickPad
+ * 2	0x02    deluxe LED controls	touchpad support LED commands
+ *					ala multimedia control bar
+ * 2	0x04	reduced filtering	firmware does less filtering on
+ *					position data, driver should watch
+ *					for noise.
+ */
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 7c38d1f..ba70058 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -299,7 +299,7 @@
 	event->owner = owner;
 
 	list_add_tail(&event->node, &serio_event_list);
-	schedule_work(&serio_event_work);
+	queue_work(system_long_wq, &serio_event_work);
 
 out:
 	spin_unlock_irqrestore(&serio_event_lock, flags);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 0bdda5b3..42fbf1a 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -518,6 +518,8 @@
 		flags |= CONF_ENABLE_IOCARD;
 	if (flags & CONF_ENABLE_IOCARD)
 		s->socket.flags |= SS_IOCARD;
+	if (flags & CONF_ENABLE_ZVCARD)
+		s->socket.flags |= SS_ZVCARD | SS_IOCARD;
 	if (flags & CONF_ENABLE_SPKR) {
 		s->socket.flags |= SS_SPKR_ENA;
 		status = CCSR_AUDIO_ENA;
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 3755e7c..2c54054 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -215,7 +215,7 @@
 }
 #endif
 
-static void pxa2xx_configure_sockets(struct device *dev)
+void pxa2xx_configure_sockets(struct device *dev)
 {
 	struct pcmcia_low_level *ops = dev->platform_data;
 	/*
diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h
index bb62ea8..b609b45 100644
--- a/drivers/pcmcia/pxa2xx_base.h
+++ b/drivers/pcmcia/pxa2xx_base.h
@@ -1,3 +1,4 @@
 int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
 void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
+void pxa2xx_configure_sockets(struct device *dev);
 
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index b9f8c8f..25afe63 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -226,6 +226,7 @@
 		lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
 
 		pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+		pxa2xx_configure_sockets(&sadev->dev);
 		ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
 				pxa2xx_drv_pcmcia_add_one);
 	}
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d163bc2..a59af5b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -227,7 +227,7 @@
 config IDEAPAD_LAPTOP
 	tristate "Lenovo IdeaPad Laptop Extras"
 	depends on ACPI
-	depends on RFKILL
+	depends on RFKILL && INPUT
 	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index c5c4b8c..38b34a7 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -84,7 +84,7 @@
  */
 #define AMW0_GUID1		"67C3371D-95A3-4C37-BB61-DD47B491DAAB"
 #define AMW0_GUID2		"431F16ED-0C2B-444C-B267-27DEB140CF9C"
-#define WMID_GUID1		"6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
+#define WMID_GUID1		"6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
 #define WMID_GUID2		"95764E09-FB56-4e83-B31A-37761F60994A"
 #define WMID_GUID3		"61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
 
@@ -1280,7 +1280,7 @@
 			return -EINVAL;
 	return count;
 }
-static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
 	set_bool_threeg);
 
 static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 4633fd8..fe49593 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1081,14 +1081,8 @@
 	struct proc_dir_entry *proc;
 	mode_t mode;
 
-	/*
-	 * If parameter uid or gid is not changed, keep the default setting for
-	 * our proc entries (-rw-rw-rw-) else, it means we care about security,
-	 * and then set to -rw-rw----
-	 */
-
 	if ((asus_uid == 0) && (asus_gid == 0)) {
-		mode = S_IFREG | S_IRUGO | S_IWUGO;
+		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
 		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 34657f9..ad24ef3 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -290,9 +290,12 @@
 	dell_send_request(buffer, 17, 11);
 
 	/* If the hardware switch controls this radio, and the hardware
-	   switch is disabled, don't allow changing the software state */
+	   switch is disabled, don't allow changing the software state.
+	   If the hardware switch is reported as not supported, always
+	   fire the SMI to toggle the killswitch. */
 	if ((hwswitch_state & BIT(hwswitch_bit)) &&
-	    !(buffer->output[1] & BIT(16))) {
+	    !(buffer->output[1] & BIT(16)) &&
+	    (buffer->output[1] & BIT(0))) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -398,6 +401,23 @@
 
 static void dell_update_rfkill(struct work_struct *ignored)
 {
+	int status;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+	release_buffer();
+
+	/* if hardware rfkill is not supported, set it explicitly */
+	if (!(status & BIT(0))) {
+		if (wifi_rfkill)
+			dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
+		if (bluetooth_rfkill)
+			dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
+		if (wwan_rfkill)
+			dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
+	}
+
 	if (wifi_rfkill)
 		dell_rfkill_query(wifi_rfkill, (void *)1);
 	if (bluetooth_rfkill)
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 930e627..61433d4 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -60,69 +60,20 @@
 #define GPOSW_DOU 0x08
 #define GPOSW_RDRV 0x30
 
+#define GPIO_UPDATE_TYPE	0x80000000
 
 #define NUM_GPIO 24
 
-struct pmic_gpio_irq {
-	spinlock_t lock;
-	u32 trigger[NUM_GPIO];
-	u32 dirty;
-	struct work_struct work;
-};
-
-
 struct pmic_gpio {
+	struct mutex		buslock;
 	struct gpio_chip	chip;
-	struct pmic_gpio_irq	irqtypes;
 	void			*gpiointr;
 	int			irq;
 	unsigned		irq_base;
+	unsigned int		update_type;
+	u32			trigger_type;
 };
 
-static void pmic_program_irqtype(int gpio, int type)
-{
-	if (type & IRQ_TYPE_EDGE_RISING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static void pmic_irqtype_work(struct work_struct *work)
-{
-	struct pmic_gpio_irq *t =
-		container_of(work, struct pmic_gpio_irq, work);
-	unsigned long flags;
-	int i;
-	u16 type;
-
-	spin_lock_irqsave(&t->lock, flags);
-	/* As we drop the lock, we may need multiple scans if we race the
-	   pmic_irq_type function */
-	while (t->dirty) {
-		/*
-		 *	For each pin that has the dirty bit set send an IPC
-		 *	message to configure the hardware via the PMIC
-		 */
-		for (i = 0; i < NUM_GPIO; i++) {
-			if (!(t->dirty & (1 << i)))
-				continue;
-			t->dirty &= ~(1 << i);
-			/* We can't trust the array entry or dirty
-			   once the lock is dropped */
-			type = t->trigger[i];
-			spin_unlock_irqrestore(&t->lock, flags);
-			pmic_program_irqtype(i, type);
-			spin_lock_irqsave(&t->lock, flags);
-		}
-	}
-	spin_unlock_irqrestore(&t->lock, flags);
-}
-
 static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 8) {
@@ -190,25 +141,24 @@
 			1 << (offset - 16));
 }
 
-static int pmic_irq_type(unsigned irq, unsigned type)
+/*
+ * This is called from genirq with pg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int pmic_irq_type(struct irq_data *data, unsigned type)
 {
-	struct pmic_gpio *pg = get_irq_chip_data(irq);
-	u32 gpio = irq - pg->irq_base;
-	unsigned long flags;
+	struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+	u32 gpio = data->irq - pg->irq_base;
 
 	if (gpio >= pg->chip.ngpio)
 		return -EINVAL;
 
-	spin_lock_irqsave(&pg->irqtypes.lock, flags);
-	pg->irqtypes.trigger[gpio] = type;
-	pg->irqtypes.dirty |=  (1 << gpio);
-	spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
-	schedule_work(&pg->irqtypes.work);
+	pg->trigger_type = type;
+	pg->update_type = gpio | GPIO_UPDATE_TYPE;
 	return 0;
 }
 
-
-
 static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
@@ -217,38 +167,32 @@
 }
 
 /* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(unsigned irq)
-{
-};
+static void pmic_irq_unmask(struct irq_data *data) { }
 
-static void pmic_irq_mask(unsigned irq)
-{
-};
+static void pmic_irq_mask(struct irq_data *data) { }
 
 static struct irq_chip pmic_irqchip = {
 	.name		= "PMIC-GPIO",
-	.mask		= pmic_irq_mask,
-	.unmask		= pmic_irq_unmask,
-	.set_type	= pmic_irq_type,
+	.irq_mask	= pmic_irq_mask,
+	.irq_unmask	= pmic_irq_unmask,
+	.irq_set_type	= pmic_irq_type,
 };
 
-static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+static irqreturn_t pmic_irq_handler(int irq, void *data)
 {
-	struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+	struct pmic_gpio *pg = data;
 	u8 intsts = *((u8 *)pg->gpiointr + 4);
 	int gpio;
+	irqreturn_t ret = IRQ_NONE;
 
 	for (gpio = 0; gpio < 8; gpio++) {
 		if (intsts & (1 << gpio)) {
 			pr_debug("pmic pin %d triggered\n", gpio);
 			generic_handle_irq(pg->irq_base + gpio);
+			ret = IRQ_HANDLED;
 		}
 	}
-
-	if (desc->chip->irq_eoi)
-		desc->chip->irq_eoi(irq_get_irq_data(irq));
-	else
-		dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
+	return ret;
 }
 
 static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
@@ -297,8 +241,7 @@
 	pg->chip.can_sleep = 1;
 	pg->chip.dev = dev;
 
-	INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
-	spin_lock_init(&pg->irqtypes.lock);
+	mutex_init(&pg->buslock);
 
 	pg->chip.dev = dev;
 	retval = gpiochip_add(&pg->chip);
@@ -306,8 +249,13 @@
 		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
 		goto err;
 	}
-	set_irq_data(pg->irq, pg);
-	set_irq_chained_handler(pg->irq, pmic_irq_handler);
+
+	retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
+	if (retval) {
+		printk(KERN_WARNING "pmic: Interrupt request failed\n");
+		goto err;
+	}
+
 	for (i = 0; i < 8; i++) {
 		set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
 					handle_simple_irq, "demux");
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 1fe0f1f..865ef78 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -162,7 +162,7 @@
 			return -EINVAL; \
 	return count; \
 } \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
 	show_bool_##value, set_bool_##value);
 
 show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index dd59958..eb99223 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2275,16 +2275,12 @@
 	if (keycode != KEY_RESERVED) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 1);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 0);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
 		mutex_unlock(&tpacpi_inputdev_send_mutex);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d..a9fe23d 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@
 static struct ccw_device_id dasd_eckd_ids[] = {
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
 	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 44c5954..81ce6a8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -48,6 +48,10 @@
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Samsung Android phone modem - ID conflict with SPH-I500 */
+	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -68,6 +72,10 @@
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Keytouch QWERTY Panel keyboard */
+	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d74a811..e6400be 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -488,6 +488,15 @@
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
 	/*
 	 * FIXME: Remove this flag.
 	 *
@@ -501,14 +510,6 @@
 	 */
 	unsigned                double_buffer_not_ok:1 __deprecated;
 
-	u8			address;
-	u8			test_mode_nr;
-	u16			ackpend;		/* ep0 */
-	enum musb_g_ep0_state	ep0_state;
-	struct usb_gadget	g;			/* the gadget */
-	struct usb_gadget_driver *gadget_driver;	/* its driver */
-#endif
-
 	struct musb_hdrc_config	*config;
 
 #ifdef MUSB_CONFIG_PROC_FS
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a3f1233..bc8badd 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -362,6 +362,7 @@
 
 static int omap2430_musb_exit(struct musb *musb)
 {
+	del_timer_sync(&musb_idle_timer);
 
 	omap2430_low_level_exit(musb);
 	otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8..0457813 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
        { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a..9c014e2 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@
 		    __func__, status, endpoint);
 	} else {
 		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
+		if (tty) {
+			if (urb->actual_length) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			} else
+				dbg("%s: empty read urb received", __func__);
+			tty_kref_put(tty);
+		}
 
 		/* Resubmit urb so we continue receiving */
 		if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89..1c11959 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
 #include "visor.h"
 
 /*
@@ -479,6 +480,17 @@
 
 	dbg("%s", __func__);
 
+	/*
+	 * some Samsung Android phones in modem mode have the same ID
+	 * as SPH-I500, but they are ACM devices, so dont bind to them
+	 */
+	if (id->idVendor == SAMSUNG_VENDOR_ID &&
+		id->idProduct == SAMSUNG_SPH_I500_ID &&
+		serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+		serial->dev->descriptor.bDeviceSubClass ==
+			USB_CDC_SUBCLASS_ACM)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 0bc68de..f0aef78 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -60,6 +60,7 @@
 	}
 	di->dentry = dentry;
 	di->lease_session = NULL;
+	di->parent_inode = igrab(dentry->d_parent->d_inode);
 	dentry->d_fsdata = di;
 	dentry->d_time = jiffies;
 	ceph_dentry_lru_add(dentry);
@@ -1033,7 +1034,7 @@
 	u64 snapid = CEPH_NOSNAP;
 
 	if (!IS_ROOT(dentry)) {
-		parent_inode = dentry->d_parent->d_inode;
+		parent_inode = di->parent_inode;
 		if (parent_inode)
 			snapid = ceph_snap(parent_inode);
 	}
@@ -1058,6 +1059,8 @@
 		kmem_cache_free(ceph_dentry_cachep, di);
 		dentry->d_fsdata = NULL;
 	}
+	if (parent_inode)
+		iput(parent_inode);
 }
 
 static int ceph_snapdir_d_revalidate(struct dentry *dentry,
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 39c243a..f40b913 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -584,10 +584,14 @@
 	if (lastinode)
 		iput(lastinode);
 
-	dout("queue_realm_cap_snaps %p %llx children\n", realm, realm->ino);
-	list_for_each_entry(child, &realm->children, child_item)
-		queue_realm_cap_snaps(child);
+	list_for_each_entry(child, &realm->children, child_item) {
+		dout("queue_realm_cap_snaps %p %llx queue child %p %llx\n",
+		     realm, realm->ino, child, child->ino);
+		list_del_init(&child->dirty_item);
+		list_add(&child->dirty_item, &realm->dirty_item);
+	}
 
+	list_del_init(&realm->dirty_item);
 	dout("queue_realm_cap_snaps %p %llx done\n", realm, realm->ino);
 }
 
@@ -683,7 +687,9 @@
 	 * queue cap snaps _after_ we've built the new snap contexts,
 	 * so that i_head_snapc can be set appropriately.
 	 */
-	list_for_each_entry(realm, &dirty_realms, dirty_item) {
+	while (!list_empty(&dirty_realms)) {
+		realm = list_first_entry(&dirty_realms, struct ceph_snap_realm,
+					 dirty_item);
 		queue_realm_cap_snaps(realm);
 	}
 
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 20b907d..88fcaa2 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -207,6 +207,7 @@
 	struct dentry *dentry;
 	u64 time;
 	u64 offset;
+	struct inode *parent_inode;
 };
 
 struct ceph_inode_xattrs_info {
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4a33302..a9371b6 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -127,5 +127,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.70"
+#define CIFS_VERSION   "1.71"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8d9189f..79f641e 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -170,7 +170,7 @@
 {
 	int rc, alen, slen;
 	const char *pct;
-	char *endp, scope_id[13];
+	char scope_id[13];
 	struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
 	struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
 
@@ -197,9 +197,9 @@
 		memcpy(scope_id, pct + 1, slen);
 		scope_id[slen] = '\0';
 
-		s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
-		if (endp != scope_id + slen)
-			return 0;
+		rc = strict_strtoul(scope_id, 0,
+					(unsigned long *)&s6->sin6_scope_id);
+		rc = (rc == 0) ? 1 : 0;
 	}
 
 	return rc;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 1adc962..1676570 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -656,13 +656,13 @@
 
 	if (type == LANMAN) {
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
-		char lnm_session_key[CIFS_SESS_KEY_SIZE];
+		char lnm_session_key[CIFS_AUTH_RESP_SIZE];
 
 		pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
 
 		/* no capabilities flags in old lanman negotiation */
 
-		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
 
 		/* Calculate hash with password and copy into bcc_ptr.
 		 * Encryption Key (stored as in cryptkey) gets used if the
@@ -675,8 +675,8 @@
 					true : false, lnm_session_key);
 
 		ses->flags |= CIFS_SES_LANMAN;
-		memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_SESS_KEY_SIZE);
-		bcc_ptr += CIFS_SESS_KEY_SIZE;
+		memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+		bcc_ptr += CIFS_AUTH_RESP_SIZE;
 
 		/* can not sign if LANMAN negotiated so no need
 		to calculate signing key? but what if server
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 6fc4f31..534c1d4 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -46,24 +46,28 @@
 {
 	struct dentry *lower_dentry;
 	struct vfsmount *lower_mnt;
-	struct dentry *dentry_save;
-	struct vfsmount *vfsmount_save;
+	struct dentry *dentry_save = NULL;
+	struct vfsmount *vfsmount_save = NULL;
 	int rc = 1;
 
-	if (nd->flags & LOOKUP_RCU)
+	if (nd && nd->flags & LOOKUP_RCU)
 		return -ECHILD;
 
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
 	lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
 	if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
 		goto out;
-	dentry_save = nd->path.dentry;
-	vfsmount_save = nd->path.mnt;
-	nd->path.dentry = lower_dentry;
-	nd->path.mnt = lower_mnt;
+	if (nd) {
+		dentry_save = nd->path.dentry;
+		vfsmount_save = nd->path.mnt;
+		nd->path.dentry = lower_dentry;
+		nd->path.mnt = lower_mnt;
+	}
 	rc = lower_dentry->d_op->d_revalidate(lower_dentry, nd);
-	nd->path.dentry = dentry_save;
-	nd->path.mnt = vfsmount_save;
+	if (nd) {
+		nd->path.dentry = dentry_save;
+		nd->path.mnt = vfsmount_save;
+	}
 	if (dentry->d_inode) {
 		struct inode *lower_inode =
 			ecryptfs_inode_to_lower(dentry->d_inode);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index dbc84ed..e007534 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -632,8 +632,7 @@
 		       u32 flags);
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct inode *ecryptfs_dir_inode,
-					struct nameidata *ecryptfs_nd);
+					struct inode *ecryptfs_dir_inode);
 int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
 					 size_t *decrypted_name_size,
 					 struct dentry *ecryptfs_dentry,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 81e10e6..7d1050e 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -317,6 +317,7 @@
 
 const struct file_operations ecryptfs_dir_fops = {
 	.readdir = ecryptfs_readdir,
+	.read = generic_read_dir,
 	.unlocked_ioctl = ecryptfs_unlocked_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = ecryptfs_compat_ioctl,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index bd33f87..b592938 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -74,16 +74,20 @@
 	unsigned int flags_save;
 	int rc;
 
-	dentry_save = nd->path.dentry;
-	vfsmount_save = nd->path.mnt;
-	flags_save = nd->flags;
-	nd->path.dentry = lower_dentry;
-	nd->path.mnt = lower_mnt;
-	nd->flags &= ~LOOKUP_OPEN;
+	if (nd) {
+		dentry_save = nd->path.dentry;
+		vfsmount_save = nd->path.mnt;
+		flags_save = nd->flags;
+		nd->path.dentry = lower_dentry;
+		nd->path.mnt = lower_mnt;
+		nd->flags &= ~LOOKUP_OPEN;
+	}
 	rc = vfs_create(lower_dir_inode, lower_dentry, mode, nd);
-	nd->path.dentry = dentry_save;
-	nd->path.mnt = vfsmount_save;
-	nd->flags = flags_save;
+	if (nd) {
+		nd->path.dentry = dentry_save;
+		nd->path.mnt = vfsmount_save;
+		nd->flags = flags_save;
+	}
 	return rc;
 }
 
@@ -241,8 +245,7 @@
  */
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct inode *ecryptfs_dir_inode,
-					struct nameidata *ecryptfs_nd)
+					struct inode *ecryptfs_dir_inode)
 {
 	struct dentry *lower_dir_dentry;
 	struct vfsmount *lower_mnt;
@@ -290,8 +293,6 @@
 		goto out;
 	if (special_file(lower_inode->i_mode))
 		goto out;
-	if (!ecryptfs_nd)
-		goto out;
 	/* Released in this function */
 	page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER);
 	if (!page_virt) {
@@ -349,75 +350,6 @@
 }
 
 /**
- * ecryptfs_new_lower_dentry
- * @name: The name of the new dentry.
- * @lower_dir_dentry: Parent directory of the new dentry.
- * @nd: nameidata from last lookup.
- *
- * Create a new dentry or get it from lower parent dir.
- */
-static struct dentry *
-ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
-			  struct nameidata *nd)
-{
-	struct dentry *new_dentry;
-	struct dentry *tmp;
-	struct inode *lower_dir_inode;
-
-	lower_dir_inode = lower_dir_dentry->d_inode;
-
-	tmp = d_alloc(lower_dir_dentry, name);
-	if (!tmp)
-		return ERR_PTR(-ENOMEM);
-
-	mutex_lock(&lower_dir_inode->i_mutex);
-	new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
-	mutex_unlock(&lower_dir_inode->i_mutex);
-
-	if (!new_dentry)
-		new_dentry = tmp;
-	else
-		dput(tmp);
-
-	return new_dentry;
-}
-
-
-/**
- * ecryptfs_lookup_one_lower
- * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
- * @lower_dir_dentry: lower parent directory
- * @name: lower file name
- *
- * Get the lower dentry from vfs. If lower dentry does not exist yet,
- * create it.
- */
-static struct dentry *
-ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
-			  struct dentry *lower_dir_dentry, struct qstr *name)
-{
-	struct nameidata nd;
-	struct vfsmount *lower_mnt;
-	int err;
-
-	lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
-				    ecryptfs_dentry->d_parent));
-	err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
-	mntput(lower_mnt);
-
-	if (!err) {
-		/* we dont need the mount */
-		mntput(nd.path.mnt);
-		return nd.path.dentry;
-	}
-	if (err != -ENOENT)
-		return ERR_PTR(err);
-
-	/* create a new lower dentry */
-	return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
-}
-
-/**
  * ecryptfs_lookup
  * @ecryptfs_dir_inode: The eCryptfs directory inode
  * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
@@ -434,7 +366,6 @@
 	size_t encrypted_and_encoded_name_size;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
 	struct dentry *lower_dir_dentry, *lower_dentry;
-	struct qstr lower_name;
 	int rc = 0;
 
 	if ((ecryptfs_dentry->d_name.len == 1
@@ -444,20 +375,14 @@
 		goto out_d_drop;
 	}
 	lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
-	lower_name.name = ecryptfs_dentry->d_name.name;
-	lower_name.len = ecryptfs_dentry->d_name.len;
-	lower_name.hash = ecryptfs_dentry->d_name.hash;
-	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
-		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-				lower_dir_dentry->d_inode, &lower_name);
-		if (rc < 0)
-			goto out_d_drop;
-	}
-	lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
-						 lower_dir_dentry, &lower_name);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+	lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
+				      lower_dir_dentry,
+				      ecryptfs_dentry->d_name.len);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
-		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
 				"[%d] on lower_dentry = [%s]\n", __func__, rc,
 				encrypted_and_encoded_name);
 		goto out_d_drop;
@@ -479,28 +404,21 @@
 		       "filename; rc = [%d]\n", __func__, rc);
 		goto out_d_drop;
 	}
-	lower_name.name = encrypted_and_encoded_name;
-	lower_name.len = encrypted_and_encoded_name_size;
-	lower_name.hash = full_name_hash(lower_name.name, lower_name.len);
-	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
-		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-				lower_dir_dentry->d_inode, &lower_name);
-		if (rc < 0)
-			goto out_d_drop;
-	}
-	lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
-						 lower_dir_dentry, &lower_name);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+	lower_dentry = lookup_one_len(encrypted_and_encoded_name,
+				      lower_dir_dentry,
+				      encrypted_and_encoded_name_size);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
-		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
 				"[%d] on lower_dentry = [%s]\n", __func__, rc,
 				encrypted_and_encoded_name);
 		goto out_d_drop;
 	}
 lookup_and_interpose:
 	rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
-						 ecryptfs_dir_inode,
-						 ecryptfs_nd);
+						 ecryptfs_dir_inode);
 	goto out;
 out_d_drop:
 	d_drop(ecryptfs_dentry);
@@ -1092,6 +1010,8 @@
 	rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
 			 ecryptfs_dentry_to_lower(dentry), &lower_stat);
 	if (!rc) {
+		fsstack_copy_attr_all(dentry->d_inode,
+				      ecryptfs_inode_to_lower(dentry->d_inode));
 		generic_fillattr(dentry->d_inode, stat);
 		stat->blocks = lower_stat.blocks;
 	}
diff --git a/fs/eventfd.c b/fs/eventfd.c
index e0194b3..d9a5917 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -99,7 +99,7 @@
  * @ctx: [in] Pointer to eventfd context.
  *
  * The eventfd context reference must have been previously acquired either
- * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ * with eventfd_ctx_get() or eventfd_ctx_fdget().
  */
 void eventfd_ctx_put(struct eventfd_ctx *ctx)
 {
@@ -146,9 +146,9 @@
  * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
  * @ctx: [in] Pointer to eventfd context.
  * @wait: [in] Wait queue to be removed.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
  *
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
  *
  * -EAGAIN      : The operation would have blocked.
  *
@@ -175,11 +175,11 @@
  * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
  * @ctx: [in] Pointer to eventfd context.
  * @no_wait: [in] Different from zero if the operation should not block.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
  *
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
  *
- * -EAGAIN      : The operation would have blocked but @no_wait was nonzero.
+ * -EAGAIN      : The operation would have blocked but @no_wait was non-zero.
  * -ERESTARTSYS : A signal interrupted the wait operation.
  *
  * If @no_wait is zero, the function might sleep until the eventfd internal
diff --git a/fs/xfs/linux-2.6/xfs_discard.c b/fs/xfs/linux-2.6/xfs_discard.c
index 05201ae..d61611c 100644
--- a/fs/xfs/linux-2.6/xfs_discard.c
+++ b/fs/xfs/linux-2.6/xfs_discard.c
@@ -152,6 +152,8 @@
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -XFS_ERROR(EPERM);
+	if (!blk_queue_discard(q))
+		return -XFS_ERROR(EOPNOTSUPP);
 	if (copy_from_user(&range, urange, sizeof(range)))
 		return -XFS_ERROR(EFAULT);
 
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index cec89dd..85668ef 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -53,6 +53,9 @@
 	xfs_fsop_geom_t		*geo,
 	int			new_version)
 {
+
+	memset(geo, 0, sizeof(*geo));
+
 	geo->blocksize = mp->m_sb.sb_blocksize;
 	geo->rtextsize = mp->m_sb.sb_rextsize;
 	geo->agblocks = mp->m_sb.sb_agblocks;
diff --git a/include/linux/module.h b/include/linux/module.h
index 9bdf27c..5de4204 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -62,7 +62,7 @@
 	struct module_attribute mattr;
 	const char *module_name;
 	const char *version;
-};
+} __attribute__ ((__aligned__(sizeof(void *))));
 
 struct module_kobject
 {
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 8479b66..3fd5064 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -261,6 +261,7 @@
 #define CONF_ENABLE_ESR         0x0008
 #define CONF_ENABLE_IOCARD	0x0010 /* auto-enabled if IO resources or IRQ
 					* (CONF_ENABLE_IRQ) in use */
+#define CONF_ENABLE_ZVCARD	0x0020
 
 /* flags used by pcmcia_loop_config() autoconfiguration */
 #define CONF_AUTO_CHECK_VCC	0x0100 /* check for matching Vcc? */
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
index b4a0db23..1eeebd5 100644
--- a/include/sound/wm8903.h
+++ b/include/sound/wm8903.h
@@ -17,13 +17,9 @@
 /*
  * R6 (0x06) - Mic Bias Control 0
  */
-#define WM8903_MICDET_HYST_ENA                  0x0080  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_MASK             0x0080  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_SHIFT                 7  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_WIDTH                 1  /* MICDET_HYST_ENA */
-#define WM8903_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_MASK                  0x0030  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_WIDTH                      2  /* MICDET_THR - [5:4] */
 #define WM8903_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
 #define WM8903_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
 #define WM8903_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 4571ae7..99c3bc8 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -3,6 +3,12 @@
  */
 #include <linux/irqdesc.h>
 
+#ifdef CONFIG_SPARSE_IRQ
+# define IRQ_BITMAP_BITS	(NR_IRQS + 8196)
+#else
+# define IRQ_BITMAP_BITS	NR_IRQS
+#endif
+
 extern int noirqdebug;
 
 #define irq_data_to_desc(data)	container_of(data, struct irq_desc, irq_data)
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 282f202..2039bea 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -94,7 +94,7 @@
 EXPORT_SYMBOL_GPL(nr_irqs);
 
 static DEFINE_MUTEX(sparse_irq_lock);
-static DECLARE_BITMAP(allocated_irqs, NR_IRQS);
+static DECLARE_BITMAP(allocated_irqs, IRQ_BITMAP_BITS);
 
 #ifdef CONFIG_SPARSE_IRQ
 
@@ -217,6 +217,15 @@
 	initcnt = arch_probe_nr_irqs();
 	printk(KERN_INFO "NR_IRQS:%d nr_irqs:%d %d\n", NR_IRQS, nr_irqs, initcnt);
 
+	if (WARN_ON(nr_irqs > IRQ_BITMAP_BITS))
+		nr_irqs = IRQ_BITMAP_BITS;
+
+	if (WARN_ON(initcnt > IRQ_BITMAP_BITS))
+		initcnt = IRQ_BITMAP_BITS;
+
+	if (initcnt > nr_irqs)
+		nr_irqs = initcnt;
+
 	for (i = 0; i < initcnt; i++) {
 		desc = alloc_desc(i, node);
 		set_bit(i, allocated_irqs);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0caa59f..9033c1c 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1100,7 +1100,7 @@
 	if (retval)
 		kfree(action);
 
-#ifdef CONFIG_DEBUG_SHIRQ
+#ifdef CONFIG_DEBUG_SHIRQ_FIXME
 	if (!retval && (irqflags & IRQF_SHARED)) {
 		/*
 		 * It's a shared IRQ -- the driver ought to be prepared for it
diff --git a/kernel/irq/resend.c b/kernel/irq/resend.c
index 891115a..dc49358 100644
--- a/kernel/irq/resend.c
+++ b/kernel/irq/resend.c
@@ -23,7 +23,7 @@
 #ifdef CONFIG_HARDIRQS_SW_RESEND
 
 /* Bitmap to handle software resend of interrupts: */
-static DECLARE_BITMAP(irqs_resend, NR_IRQS);
+static DECLARE_BITMAP(irqs_resend, IRQ_BITMAP_BITS);
 
 /*
  * Run software resends of IRQ's
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 999835b..656222f 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -782,6 +782,10 @@
 	raw_spin_unlock_irq(&ctx->lock);
 }
 
+#define MAX_INTERRUPTS (~0ULL)
+
+static void perf_log_throttle(struct perf_event *event, int enable);
+
 static int
 event_sched_in(struct perf_event *event,
 		 struct perf_cpu_context *cpuctx,
@@ -794,6 +798,17 @@
 
 	event->state = PERF_EVENT_STATE_ACTIVE;
 	event->oncpu = smp_processor_id();
+
+	/*
+	 * Unthrottle events, since we scheduled we might have missed several
+	 * ticks already, also for a heavily scheduling task there is little
+	 * guarantee it'll get a tick in a timely manner.
+	 */
+	if (unlikely(event->hw.interrupts == MAX_INTERRUPTS)) {
+		perf_log_throttle(event, 1);
+		event->hw.interrupts = 0;
+	}
+
 	/*
 	 * The new state must be visible before we turn it on in the hardware:
 	 */
@@ -1596,10 +1611,6 @@
 	}
 }
 
-#define MAX_INTERRUPTS (~0ULL)
-
-static void perf_log_throttle(struct perf_event *event, int enable);
-
 static u64 perf_calculate_period(struct perf_event *event, u64 nsec, u64 count)
 {
 	u64 frequency = event->attr.sample_freq;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index dff633d..35b36b8 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -252,8 +252,12 @@
 {
 	struct kvec iov = {buf, len};
 	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+	int r;
 
-	return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+	r = kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+	if (r == -EAGAIN)
+		r = 0;
+	return r;
 }
 
 /*
@@ -264,13 +268,17 @@
 		     size_t kvlen, size_t len, int more)
 {
 	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+	int r;
 
 	if (more)
 		msg.msg_flags |= MSG_MORE;
 	else
 		msg.msg_flags |= MSG_EOR;  /* superfluous, but what the hell */
 
-	return kernel_sendmsg(sock, &msg, iov, kvlen, len);
+	r = kernel_sendmsg(sock, &msg, iov, kvlen, len);
+	if (r == -EAGAIN)
+		r = 0;
+	return r;
 }
 
 
@@ -847,6 +855,8 @@
 		    (msg->pages || msg->pagelist || msg->bio || in_trail))
 			kunmap(page);
 
+		if (ret == -EAGAIN)
+			ret = 0;
 		if (ret <= 0)
 			goto out;
 
@@ -1737,16 +1747,12 @@
 	if (con->out_skip) {
 		ret = write_partial_skip(con);
 		if (ret <= 0)
-			goto done;
-		if (ret < 0) {
-			dout("try_write write_partial_skip err %d\n", ret);
-			goto done;
-		}
+			goto out;
 	}
 	if (con->out_kvec_left) {
 		ret = write_partial_kvec(con);
 		if (ret <= 0)
-			goto done;
+			goto out;
 	}
 
 	/* msg pages? */
@@ -1761,11 +1767,11 @@
 		if (ret == 1)
 			goto more_kvec;  /* we need to send the footer, too! */
 		if (ret == 0)
-			goto done;
+			goto out;
 		if (ret < 0) {
 			dout("try_write write_partial_msg_pages err %d\n",
 			     ret);
-			goto done;
+			goto out;
 		}
 	}
 
@@ -1789,10 +1795,9 @@
 	/* Nothing to do! */
 	clear_bit(WRITE_PENDING, &con->state);
 	dout("try_write nothing else to write.\n");
-done:
 	ret = 0;
 out:
-	dout("try_write done on %p\n", con);
+	dout("try_write done on %p ret %d\n", con, ret);
 	return ret;
 }
 
@@ -1821,19 +1826,17 @@
 			dout("try_read connecting\n");
 			ret = read_partial_banner(con);
 			if (ret <= 0)
-				goto done;
-			if (process_banner(con) < 0) {
-				ret = -1;
 				goto out;
-			}
+			ret = process_banner(con);
+			if (ret < 0)
+				goto out;
 		}
 		ret = read_partial_connect(con);
 		if (ret <= 0)
-			goto done;
-		if (process_connect(con) < 0) {
-			ret = -1;
 			goto out;
-		}
+		ret = process_connect(con);
+		if (ret < 0)
+			goto out;
 		goto more;
 	}
 
@@ -1848,7 +1851,7 @@
 		dout("skipping %d / %d bytes\n", skip, -con->in_base_pos);
 		ret = ceph_tcp_recvmsg(con->sock, buf, skip);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		con->in_base_pos += ret;
 		if (con->in_base_pos)
 			goto more;
@@ -1859,7 +1862,7 @@
 		 */
 		ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		dout("try_read got tag %d\n", (int)con->in_tag);
 		switch (con->in_tag) {
 		case CEPH_MSGR_TAG_MSG:
@@ -1870,7 +1873,7 @@
 			break;
 		case CEPH_MSGR_TAG_CLOSE:
 			set_bit(CLOSED, &con->state);   /* fixme */
-			goto done;
+			goto out;
 		default:
 			goto bad_tag;
 		}
@@ -1882,13 +1885,12 @@
 			case -EBADMSG:
 				con->error_msg = "bad crc";
 				ret = -EIO;
-				goto out;
+				break;
 			case -EIO:
 				con->error_msg = "io error";
-				goto out;
-			default:
-				goto done;
+				break;
 			}
+			goto out;
 		}
 		if (con->in_tag == CEPH_MSGR_TAG_READY)
 			goto more;
@@ -1898,15 +1900,13 @@
 	if (con->in_tag == CEPH_MSGR_TAG_ACK) {
 		ret = read_partial_ack(con);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		process_ack(con);
 		goto more;
 	}
 
-done:
-	ret = 0;
 out:
-	dout("try_read done on %p\n", con);
+	dout("try_read done on %p ret %d\n", con, ret);
 	return ret;
 
 bad_tag:
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index c9a16ab..6c94c6c 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -315,6 +315,7 @@
 	char *end = m + len;
 	char *p;
 	char s[PATH_MAX];
+	int first;
 
 	p = strchr(m, ':');
 	if (!p) {
@@ -327,6 +328,7 @@
 
 	clear_config();
 
+	first = 1;
 	while (m < end) {
 		while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
 			m++;
@@ -340,9 +342,17 @@
 		if (strrcmp(s, "include/generated/autoconf.h") &&
 		    strrcmp(s, "arch/um/include/uml-config.h") &&
 		    strrcmp(s, ".ver")) {
-			printf("  %s \\\n", s);
+			/*
+			 * Do not output the first dependency (the
+			 * source file), so that kbuild is not confused
+			 * if a .c file is rewritten into .S or vice
+			 * versa.
+			 */
+			if (!first)
+				printf("  %s \\\n", s);
 			do_config_file(s);
 		}
+		first = 0;
 		m = p + 1;
 	}
 	printf("\n%s: $(deps_%s)\n\n", target, target);
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f3..16c0bdf 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@
 static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
 {
 	stream_t *dma = &vortex->dma_adb[adbdma];
-	int temp;
+	int temp, page, delta;
 
 	temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
-	return temp;
+	page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+	if (dma->nr_periods >= 4)
+		delta = (page - dma->period_real) & 3;
+	else {
+		delta = (page - dma->period_real);
+		if (delta < 0)
+			delta += dma->nr_periods;
+	}
+	return (dma->period_virt + delta) * dma->period_bytes
+		+ (temp & (dma->period_bytes - 1));
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcd..fcedad9 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d3..dd7c5c1 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3410,7 +3410,7 @@
 		}
 	}
 	spec->multiout.dac_nids = spec->private_dac_nids;
-	spec->multiout.max_channels = nums * 2;
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
 	if (cfg->hp_outs > 0)
 		spec->auto_mute = 1;
@@ -3729,9 +3729,9 @@
 	return 0;
 }
 
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
 			      const char *dir, int cidx,
-			      hda_nid_t nid, int hda_dir)
+			      hda_nid_t nid, int hda_dir, int amp_idx)
 {
 	static char name[32];
 	static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3743,8 @@
 
 	for (i = 0; i < 2; i++) {
 		struct snd_kcontrol *kctl;
-		knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+		knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+							    hda_dir);
 		knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
 		knew[i].index = cidx;
 		snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3760,9 @@
 	return 0;
 }
 
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir)		\
+	cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
 #define cx_auto_add_pb_volume(codec, nid, str, idx)			\
 	cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
 
@@ -3808,29 +3812,60 @@
 	struct conexant_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
 	static const char *prev_label;
-	int i, err, cidx;
+	int i, err, cidx, conn_len;
+	hda_nid_t conn[HDA_MAX_CONNECTIONS];
 
-	err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
-				 HDA_INPUT);
-	if (err < 0)
-		return err;
+	int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+	int adc_nid = spec->adc_nids[0];
+
+	conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+					   HDA_MAX_CONNECTIONS);
+	if (conn_len < 0)
+		return conn_len;
+
+	multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+	if (!multi_adc_volume) {
+		err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+					 HDA_INPUT);
+		if (err < 0)
+			return err;
+	}
+
 	prev_label = NULL;
 	cidx = 0;
 	for (i = 0; i < cfg->num_inputs; i++) {
 		hda_nid_t nid = cfg->inputs[i].pin;
 		const char *label;
-		if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+		int j;
+		int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+		if (!pin_amp && !multi_adc_volume)
 			continue;
+
 		label = hda_get_autocfg_input_label(codec, cfg, i);
 		if (label == prev_label)
 			cidx++;
 		else
 			cidx = 0;
 		prev_label = label;
-		err = cx_auto_add_volume(codec, label, " Capture", cidx,
-					 nid, HDA_INPUT);
-		if (err < 0)
-			return err;
+
+		if (pin_amp) {
+			err = cx_auto_add_volume(codec, label, " Boost", cidx,
+						 nid, HDA_INPUT);
+			if (err < 0)
+				return err;
+		}
+
+		if (!multi_adc_volume)
+			continue;
+		for (j = 0; j < conn_len; j++) {
+			if (conn[j] == nid) {
+				err = cx_auto_add_volume_idx(codec, label,
+				    " Capture", cidx, adc_nid, HDA_INPUT, j);
+				if (err < 0)
+					return err;
+				break;
+			}
+		}
 	}
 	return 0;
 }
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
index bb4bf65..0bb424a 100644
--- a/sound/soc/codecs/cx20442.c
+++ b/sound/soc/codecs/cx20442.c
@@ -367,7 +367,7 @@
 	return 0;
 }
 
-static const u8 cx20442_reg = CX20442_TELOUT | CX20442_MIC;
+static const u8 cx20442_reg;
 
 static struct snd_soc_codec_driver cx20442_codec_dev = {
 	.probe = 	cx20442_codec_probe,
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 987476a..017d99c 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -1482,7 +1482,7 @@
 			    WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
 			    irq_mask);
 
-	if (det && shrt) {
+	if (det || shrt) {
 		/* Enable mic detection, this may not have been set through
 		 * platform data (eg, if the defaults are OK). */
 		snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 37b8aa8..a60b5db 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -107,6 +107,9 @@
 
 	int revision;
 	struct wm8994_pdata *pdata;
+
+	unsigned int aif1clk_enable:1;
+	unsigned int aif2clk_enable:1;
 };
 
 static int wm8994_readable(unsigned int reg)
@@ -1004,6 +1007,93 @@
 	}
 }
 
+static int late_enable_ev(struct snd_soc_dapm_widget *w,
+			  struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		if (wm8994->aif1clk_enable)
+			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+					    WM8994_AIF1CLK_ENA_MASK,
+					    WM8994_AIF1CLK_ENA);
+		if (wm8994->aif2clk_enable)
+			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+					    WM8994_AIF2CLK_ENA_MASK,
+					    WM8994_AIF2CLK_ENA);
+		break;
+	}
+
+	return 0;
+}
+
+static int late_disable_ev(struct snd_soc_dapm_widget *w,
+			   struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMD:
+		if (wm8994->aif1clk_enable) {
+			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
+					    WM8994_AIF1CLK_ENA_MASK, 0);
+			wm8994->aif1clk_enable = 0;
+		}
+		if (wm8994->aif2clk_enable) {
+			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
+					    WM8994_AIF2CLK_ENA_MASK, 0);
+			wm8994->aif2clk_enable = 0;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static int aif1clk_ev(struct snd_soc_dapm_widget *w,
+		      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		wm8994->aif1clk_enable = 1;
+		break;
+	}
+
+	return 0;
+}
+
+static int aif2clk_ev(struct snd_soc_dapm_widget *w,
+		      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		wm8994->aif2clk_enable = 1;
+		break;
+	}
+
+	return 0;
+}
+
+static int dac_ev(struct snd_soc_dapm_widget *w,
+		  struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	unsigned int mask = 1 << w->shift;
+
+	snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+			    mask, mask);
+	return 0;
+}
+
 static const char *hp_mux_text[] = {
 	"Mixer",
 	"DAC",
@@ -1272,6 +1362,47 @@
 static const struct snd_kcontrol_new aif2dacr_src_mux =
 	SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum);
 
+static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = {
+SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_ev,
+	SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_ev,
+	SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+	late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC1R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+	late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC2L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+	late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_PGA_E("Late DAC2R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+	late_enable_ev, SND_SOC_DAPM_PRE_PMU),
+
+SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev)
+};
+
+static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
+SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0)
+};
+
+static const struct snd_soc_dapm_widget wm8994_dac_revd_widgets[] = {
+SND_SOC_DAPM_DAC_E("DAC2L", NULL, SND_SOC_NOPM, 3, 0,
+	dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC2R", NULL, SND_SOC_NOPM, 2, 0,
+	dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1L", NULL, SND_SOC_NOPM, 1, 0,
+	dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1R", NULL, SND_SOC_NOPM, 0, 0,
+	dac_ev, SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_widget wm8994_dac_widgets[] = {
+SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
+SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
+};
+
 static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
 SND_SOC_DAPM_INPUT("DMIC1DAT"),
 SND_SOC_DAPM_INPUT("DMIC2DAT"),
@@ -1284,9 +1415,6 @@
 SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0),
 SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0),
 
-SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
-SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0),
-
 SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL,
 		     0, WM8994_POWER_MANAGEMENT_4, 9, 0),
 SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL,
@@ -1372,11 +1500,6 @@
 SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
 SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
 
-SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
-SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
-SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
-SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
-
 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
 
@@ -1516,14 +1639,12 @@
 	{ "AIF2ADC Mux", "AIF3DACDAT", "AIF3ADCDAT" },
 
 	/* DAC1 inputs */
-	{ "DAC1L", NULL, "DAC1L Mixer" },
 	{ "DAC1L Mixer", "AIF2 Switch", "AIF2DACL" },
 	{ "DAC1L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
 	{ "DAC1L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
 	{ "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" },
 	{ "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" },
 
-	{ "DAC1R", NULL, "DAC1R Mixer" },
 	{ "DAC1R Mixer", "AIF2 Switch", "AIF2DACR" },
 	{ "DAC1R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
 	{ "DAC1R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
@@ -1532,7 +1653,6 @@
 
 	/* DAC2/AIF2 outputs  */
 	{ "AIF2ADCL", NULL, "AIF2DAC2L Mixer" },
-	{ "DAC2L", NULL, "AIF2DAC2L Mixer" },
 	{ "AIF2DAC2L Mixer", "AIF2 Switch", "AIF2DACL" },
 	{ "AIF2DAC2L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
 	{ "AIF2DAC2L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
@@ -1540,7 +1660,6 @@
 	{ "AIF2DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" },
 
 	{ "AIF2ADCR", NULL, "AIF2DAC2R Mixer" },
-	{ "DAC2R", NULL, "AIF2DAC2R Mixer" },
 	{ "AIF2DAC2R Mixer", "AIF2 Switch", "AIF2DACR" },
 	{ "AIF2DAC2R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
 	{ "AIF2DAC2R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
@@ -1584,6 +1703,24 @@
 	{ "Right Headphone Mux", "DAC", "DAC1R" },
 };
 
+static const struct snd_soc_dapm_route wm8994_lateclk_revd_intercon[] = {
+	{ "DAC1L", NULL, "Late DAC1L Enable PGA" },
+	{ "Late DAC1L Enable PGA", NULL, "DAC1L Mixer" },
+	{ "DAC1R", NULL, "Late DAC1R Enable PGA" },
+	{ "Late DAC1R Enable PGA", NULL, "DAC1R Mixer" },
+	{ "DAC2L", NULL, "Late DAC2L Enable PGA" },
+	{ "Late DAC2L Enable PGA", NULL, "AIF2DAC2L Mixer" },
+	{ "DAC2R", NULL, "Late DAC2R Enable PGA" },
+	{ "Late DAC2R Enable PGA", NULL, "AIF2DAC2R Mixer" }
+};
+
+static const struct snd_soc_dapm_route wm8994_lateclk_intercon[] = {
+	{ "DAC1L", NULL, "DAC1L Mixer" },
+	{ "DAC1R", NULL, "DAC1R Mixer" },
+	{ "DAC2L", NULL, "AIF2DAC2L Mixer" },
+	{ "DAC2R", NULL, "AIF2DAC2R Mixer" },
+};
+
 static const struct snd_soc_dapm_route wm8994_revd_intercon[] = {
 	{ "AIF1DACDAT", NULL, "AIF2DACDAT" },
 	{ "AIF2DACDAT", NULL, "AIF1DACDAT" },
@@ -2514,6 +2651,22 @@
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	int i, ret;
+	unsigned int val, mask;
+
+	if (wm8994->revision < 4) {
+		/* force a HW read */
+		val = wm8994_reg_read(codec->control_data,
+				      WM8994_POWER_MANAGEMENT_5);
+
+		/* modify the cache only */
+		codec->cache_only = 1;
+		mask =  WM8994_DAC1R_ENA | WM8994_DAC1L_ENA |
+			WM8994_DAC2R_ENA | WM8994_DAC2L_ENA;
+		val &= mask;
+		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+				    mask, val);
+		codec->cache_only = 0;
+	}
 
 	/* Restore the registers */
 	ret = snd_soc_cache_sync(codec);
@@ -3125,6 +3278,17 @@
 	case WM8994:
 		snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
 					  ARRAY_SIZE(wm8994_specific_dapm_widgets));
+		if (wm8994->revision < 4) {
+			snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
+						  ARRAY_SIZE(wm8994_lateclk_revd_widgets));
+			snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
+						  ARRAY_SIZE(wm8994_dac_revd_widgets));
+		} else {
+			snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
+						  ARRAY_SIZE(wm8994_lateclk_widgets));
+			snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
+						  ARRAY_SIZE(wm8994_dac_widgets));
+		}
 		break;
 	case WM8958:
 		snd_soc_add_controls(codec, wm8958_snd_controls,
@@ -3143,10 +3307,15 @@
 		snd_soc_dapm_add_routes(dapm, wm8994_intercon,
 					ARRAY_SIZE(wm8994_intercon));
 
-		if (wm8994->revision < 4)
+		if (wm8994->revision < 4) {
 			snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon,
 						ARRAY_SIZE(wm8994_revd_intercon));
-			
+			snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon,
+						ARRAY_SIZE(wm8994_lateclk_revd_intercon));
+		} else {
+			snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
+						ARRAY_SIZE(wm8994_lateclk_intercon));
+		}
 		break;
 	case WM8958:
 		snd_soc_dapm_add_routes(dapm, wm8958_intercon,
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 8194f15..25e5423 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -712,7 +712,15 @@
 		    !path->connected(path->source, path->sink))
 			continue;
 
-		if (path->sink && path->sink->power_check &&
+		if (!path->sink)
+			continue;
+
+		if (path->sink->force) {
+			power = 1;
+			break;
+		}
+
+		if (path->sink->power_check &&
 		    path->sink->power_check(path->sink)) {
 			power = 1;
 			break;
@@ -1627,6 +1635,7 @@
 int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm)
 {
 	struct snd_soc_dapm_widget *w;
+	unsigned int val;
 
 	list_for_each_entry(w, &dapm->card->widgets, list)
 	{
@@ -1675,6 +1684,18 @@
 		case snd_soc_dapm_post:
 			break;
 		}
+
+		/* Read the initial power state from the device */
+		if (w->reg >= 0) {
+			val = snd_soc_read(w->codec, w->reg);
+			val &= 1 << w->shift;
+			if (w->invert)
+				val = !val;
+
+			if (val)
+				w->power = 1;
+		}
+
 		w->new = 1;
 	}
 
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b9747..66eabaf 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@
 	}
 
 	dev->pcm->private_data = dev;
-	strcpy(dev->pcm->name, dev->product_name);
+	strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
 
 	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
 	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c7..a1a47088 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@
 	if (ret < 0)
 		return ret;
 
-	strcpy(rmidi->name, device->product_name);
+	strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
 
 	rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
 	rmidi->private_data = device;