diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 8cfeb2b..7f42129 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -52,6 +52,11 @@
 MODULE_PARM_DESC(repeat_period, "repeat period between "
     "keypresses when key is down");
 
+static unsigned int disable_other_ir;
+module_param(disable_other_ir, int, 0644);
+MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
+    "alternative remotes from other manufacturers");
+
 #define dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
@@ -154,6 +159,45 @@
 	return 1;
 }
 
+
+static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	unsigned char data[12];
+	u32 gpio;
+
+	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+
+	/* rising SAA7134_GPIO_GPRESCAN reads the status */
+	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+	gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+	if (0x400000 &~ gpio)
+		return 0; /* No button press */
+
+	ir->c.addr = 0x5a >> 1;
+
+	if (12 != i2c_master_recv(&ir->c, data, 12)) {
+		i2cdprintk("read error\n");
+		return -EIO;
+	}
+	/* IR of this card normally decode signals NEC-standard from
+	 * - Sven IHOO MT 5.1R remote. xxyye718
+	 * - Sven DVD HD-10xx remote. xxyyf708
+	 * - BBK ...
+	 * - mayby others
+	 * So, skip not our, if disable full codes mode.
+	 */
+	if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir)
+		return 0;
+
+	*ir_key = data[9];
+	*ir_raw = data[9];
+
+	return 1;
+}
+
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
 	struct card_ir *ir = dev->remote;
@@ -288,6 +332,16 @@
 	case SAA7134_BOARD_MANLI_MTV001:
 	case SAA7134_BOARD_MANLI_MTV002:
 	case SAA7134_BOARD_BEHOLD_409FM:
+	case SAA7134_BOARD_BEHOLD_401:
+	case SAA7134_BOARD_BEHOLD_403:
+	case SAA7134_BOARD_BEHOLD_403FM:
+	case SAA7134_BOARD_BEHOLD_405:
+	case SAA7134_BOARD_BEHOLD_405FM:
+	case SAA7134_BOARD_BEHOLD_407:
+	case SAA7134_BOARD_BEHOLD_407FM:
+	case SAA7134_BOARD_BEHOLD_409:
+	case SAA7134_BOARD_BEHOLD_505FM:
+	case SAA7134_BOARD_BEHOLD_507_9FM:
 		ir_codes     = ir_codes_manli;
 		mask_keycode = 0x001f00;
 		mask_keyup   = 0x004000;
@@ -458,6 +512,12 @@
 		ir->get_key   = get_key_hvr1110;
 		ir->ir_codes  = ir_codes_hauppauge_new;
 		break;
+	case SAA7134_BOARD_BEHOLD_607_9FM:
+	case SAA7134_BOARD_BEHOLD_M6:
+		snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV");
+		ir->get_key   = get_key_beholdm6xx;
+		ir->ir_codes  = ir_codes_behold;
+		break;
 	default:
 		dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
 		break;