diff --git a/drivers/pinctrl/pinctrl-tegra.h b/drivers/pinctrl/pinctrl-tegra.h
index 6053832..7262ba8 100644
--- a/drivers/pinctrl/pinctrl-tegra.h
+++ b/drivers/pinctrl/pinctrl-tegra.h
@@ -78,55 +78,49 @@
 
 /**
  * struct tegra_pingroup - Tegra pin group
- * @mux_reg:		Mux register offset. -1 if unsupported.
- * @mux_bank:		Mux register bank. 0 if unsupported.
- * @mux_bit:		Mux register bit. 0 if unsupported.
- * @pupd_reg:		Pull-up/down register offset. -1 if unsupported.
- * @pupd_bank:		Pull-up/down register bank. 0 if unsupported.
- * @pupd_bit:		Pull-up/down register bit. 0 if unsupported.
- * @tri_reg:		Tri-state register offset. -1 if unsupported.
- * @tri_bank:		Tri-state register bank. 0 if unsupported.
- * @tri_bit:		Tri-state register bit. 0 if unsupported.
- * @einput_reg:		Enable-input register offset. -1 if unsupported.
- * @einput_bank:	Enable-input register bank. 0 if unsupported.
- * @einput_bit:		Enable-input register bit. 0 if unsupported.
- * @odrain_reg:		Open-drain register offset. -1 if unsupported.
- * @odrain_bank:	Open-drain register bank. 0 if unsupported.
- * @odrain_bit:		Open-drain register bit. 0 if unsupported.
- * @lock_reg:		Lock register offset. -1 if unsupported.
- * @lock_bank:		Lock register bank. 0 if unsupported.
- * @lock_bit:		Lock register bit. 0 if unsupported.
- * @ioreset_reg:	IO reset register offset. -1 if unsupported.
- * @ioreset_bank:	IO reset register bank. 0 if unsupported.
- * @ioreset_bit:	IO reset register bit. 0 if unsupported.
- * @rcv_sel_reg:	Receiver select offset. -1 if unsupported.
- * @rcv_sel_bank:	Receiver select bank. 0 if unsupported.
- * @rcv_sel_bit:	Receiver select bit. 0 if unsupported.
- * @drv_reg:		Drive fields register offset. -1 if unsupported.
- *			This register contains the hsm, schmitt, lpmd, drvdn,
- *			drvup, slwr, and slwf parameters.
- * @drv_bank:		Drive fields register bank. 0 if unsupported.
- * @hsm_bit:		High Speed Mode register bit. 0 if unsupported.
- * @schmitt_bit:	Scmitt register bit. 0 if unsupported.
- * @lpmd_bit:		Low Power Mode register bit. 0 if unsupported.
- * @drvdn_bit:		Drive Down register bit. 0 if unsupported.
- * @drvdn_width:	Drive Down field width. 0 if unsupported.
- * @drvup_bit:		Drive Up register bit. 0 if unsupported.
- * @drvup_width:	Drive Up field width. 0 if unsupported.
- * @slwr_bit:		Slew Rising register bit. 0 if unsupported.
- * @slwr_width:		Slew Rising field width. 0 if unsupported.
- * @slwf_bit:		Slew Falling register bit. 0 if unsupported.
- * @slwf_width:		Slew Falling field width. 0 if unsupported.
- * @drvtype_reg:	Drive type fields register offset. -1 if unsupported.
- * @drvtype_bank:	Drive type fields register bank. 0 if unsupported.
- * @drvtype_bit:	Drive type register bit. 0 if unsupported.
+ * @mux_reg:		Mux register offset.
+ *			This register contains the mux, einput, odrain, lock,
+ *			ioreset, rcv_sel parameters.
+ * @mux_bank:		Mux register bank.
+ * @mux_bit:		Mux register bit.
+ * @pupd_reg:		Pull-up/down register offset.
+ * @pupd_bank:		Pull-up/down register bank.
+ * @pupd_bit:		Pull-up/down register bit.
+ * @tri_reg:		Tri-state register offset.
+ * @tri_bank:		Tri-state register bank.
+ * @tri_bit:		Tri-state register bit.
+ * @einput_bit:		Enable-input register bit.
+ * @odrain_bit:		Open-drain register bit.
+ * @lock_bit:		Lock register bit.
+ * @ioreset_bit:	IO reset register bit.
+ * @rcv_sel_bit:	Receiver select bit.
+ * @drv_reg:		Drive fields register offset.
+ *			This register contains hsm, schmitt, lpmd, drvdn,
+ *			drvup, slwr, slwf, and drvtype parameters.
+ * @drv_bank:		Drive fields register bank.
+ * @hsm_bit:		High Speed Mode register bit.
+ * @schmitt_bit:	Scmitt register bit.
+ * @lpmd_bit:		Low Power Mode register bit.
+ * @drvdn_bit:		Drive Down register bit.
+ * @drvdn_width:	Drive Down field width.
+ * @drvup_bit:		Drive Up register bit.
+ * @drvup_width:	Drive Up field width.
+ * @slwr_bit:		Slew Rising register bit.
+ * @slwr_width:		Slew Rising field width.
+ * @slwf_bit:		Slew Falling register bit.
+ * @slwf_width:		Slew Falling field width.
+ * @drvtype_bit:	Drive type register bit.
+ *
+ * -1 in a *_reg field means that feature is unsupported for this group.
+ * *_bank and *_reg values are irrelevant when *_reg is -1.
+ * When *_reg is valid, *_bit may be -1 to indicate an unsupported feature.
  *
  * A representation of a group of pins (possibly just one pin) in the Tegra
  * pin controller. Each group allows some parameter or parameters to be
  * configured. The most common is mux function selection. Many others exist
  * such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
  * certain groups may only support configuring certain parameters, hence
- * each parameter is optional, represented by a -1 "reg" value.
+ * each parameter is optional.
  */
 struct tegra_pingroup {
 	const char *name;
@@ -137,39 +131,27 @@
 	s16 mux_reg;
 	s16 pupd_reg;
 	s16 tri_reg;
-	s16 einput_reg;
-	s16 odrain_reg;
-	s16 lock_reg;
-	s16 ioreset_reg;
-	s16 rcv_sel_reg;
 	s16 drv_reg;
-	s16 drvtype_reg;
 	u32 mux_bank:2;
 	u32 pupd_bank:2;
 	u32 tri_bank:2;
-	u32 einput_bank:2;
-	u32 odrain_bank:2;
-	u32 ioreset_bank:2;
-	u32 rcv_sel_bank:2;
-	u32 lock_bank:2;
 	u32 drv_bank:2;
-	u32 drvtype_bank:2;
-	u32 mux_bit:5;
-	u32 pupd_bit:5;
-	u32 tri_bit:5;
-	u32 einput_bit:5;
-	u32 odrain_bit:5;
-	u32 lock_bit:5;
-	u32 ioreset_bit:5;
-	u32 rcv_sel_bit:5;
-	u32 hsm_bit:5;
-	u32 schmitt_bit:5;
-	u32 lpmd_bit:5;
-	u32 drvdn_bit:5;
-	u32 drvup_bit:5;
-	u32 slwr_bit:5;
-	u32 slwf_bit:5;
-	u32 drvtype_bit:5;
+	u32 mux_bit:6;
+	u32 pupd_bit:6;
+	u32 tri_bit:6;
+	u32 einput_bit:6;
+	u32 odrain_bit:6;
+	u32 lock_bit:6;
+	u32 ioreset_bit:6;
+	u32 rcv_sel_bit:6;
+	u32 hsm_bit:6;
+	u32 schmitt_bit:6;
+	u32 lpmd_bit:6;
+	u32 drvdn_bit:6;
+	u32 drvup_bit:6;
+	u32 slwr_bit:6;
+	u32 slwf_bit:6;
+	u32 drvtype_bit:6;
 	u32 drvdn_width:6;
 	u32 drvup_width:6;
 	u32 slwr_width:6;