diff --git a/.mailmap b/.mailmap
index a4806f0..9b0d026 100644
--- a/.mailmap
+++ b/.mailmap
@@ -68,6 +68,7 @@
 Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Mark Brown <broonie@sirena.org.uk>
@@ -111,3 +112,4 @@
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 0000000..964c7a8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,22 @@
+What: 		/sys/firmware/acpi/pm_profile
+Date:		03-Nov-2011
+KernelVersion:	v3.2
+Contact:	linux-acpi@vger.kernel.org
+Description: 	The ACPI pm_profile sysfs interface exports the platform
+		power management (and performance) requirement expectations
+		as provided by BIOS. The integer value is directly passed as
+		retrieved from the FADT ACPI table.
+Values:         For possible values see ACPI specification:
+		5.2.9 Fixed ACPI Description Table (FADT)
+		Field: Preferred_PM_Profile
+
+		Currently these values are defined by spec:
+		0 Unspecified
+		1 Desktop
+		2 Mobile
+		3 Workstation
+		4 Enterprise Server
+		5 SOHO Server
+		6 Appliance PC
+		7 Performance Server
+		>7 Reserved
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 2b5d561..c1eb41c 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -206,16 +206,3 @@
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index f5bb0a3..53d99ed 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -71,3 +71,10 @@
 		a dump device, as kdump requires resetting the device in order
 		to work reliably.
 
+Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
+Date:		July 2011
+Kernel Version:	3.0
+Contact:	iss_storagedev@hp.com
+Description:	Value of "simple" indicates that the controller has been placed
+		in "simple mode". Value of "performant" indicates that the
+		controller has been placed in "performant mode".
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-multitouch b/Documentation/ABI/testing/sysfs-driver-hid-multitouch
new file mode 100644
index 0000000..f79839d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-multitouch
@@ -0,0 +1,9 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/quirks
+Date:		November 2011
+Contact:	Benjamin Tissoires <benjamin.tissoires@gmail.com>
+Description:	The integer value of this attribute corresponds to the
+		quirks actually in place to handle the device's protocol.
+		When read, this attribute returns the current settings (see
+		MT_QUIRKS_* in hid-multitouch.c).
+		When written this attribute change on the fly the quirks, then
+		the protocol to handle the device.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
new file mode 100644
index 0000000..189dc43
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku
@@ -0,0 +1,135 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the actual
+		profile. This value is persistent, so its equivalent to the
+		profile that's active when the device is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the device activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 6 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile number for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock key for a specific profile. Profile number is included
+		in written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile number is included
+		in written data. The data has to be 65 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile number is included
+		in written data. The data has to be 41 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the media
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 29 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile number is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the time in secs since
+		epoch in which the last configuration took place.
+		The data has to be 20 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile number is included in written data.
+		The data has to be 10 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index c940239..2b90d32 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -166,8 +166,8 @@
 else
 	do_that();
 
-This does not apply if one branch of a conditional statement is a single
-statement. Use braces in both branches.
+This does not apply if only one branch of a conditional statement is a single
+statement; in the latter case use braces in both branches:
 
 if (condition) {
 	do_this();
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c279158..196b8b9 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -32,7 +32,7 @@
       The Linux DRM layer contains code intended to support the needs
       of complex graphics devices, usually containing programmable
       pipelines well suited to 3D graphics acceleration.  Graphics
-      drivers in the kernel can make use of DRM functions to make
+      drivers in the kernel may make use of DRM functions to make
       tasks like memory management, interrupt handling and DMA easier,
       and provide a uniform interface to applications.
     </para>
@@ -57,10 +57,10 @@
       existing drivers.
     </para>
     <para>
-      First, we'll go over some typical driver initialization
+      First, we go over some typical driver initialization
       requirements, like setting up command buffers, creating an
       initial output configuration, and initializing core services.
-      Subsequent sections will cover core internals in more detail,
+      Subsequent sections cover core internals in more detail,
       providing implementation notes and examples.
     </para>
     <para>
@@ -74,7 +74,7 @@
     </para>
     <para>
       The core of every DRM driver is struct drm_driver.  Drivers
-      will typically statically initialize a drm_driver structure,
+      typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -88,8 +88,8 @@
     </para>
     <programlisting>
       static struct drm_driver driver = {
-	/* don't use mtrr's here, the Xserver or user space app should
-	 * deal with them for intel hardware.
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
@@ -154,8 +154,8 @@
     </programlisting>
     <para>
       In the example above, taken from the i915 DRM driver, the driver
-      sets several flags indicating what core features it supports.
-      We'll go over the individual callbacks in later sections.  Since
+      sets several flags indicating what core features it supports;
+      we go over the individual callbacks in later sections.  Since
       flags indicate which features your driver supports to the DRM
       core, you need to set most of them prior to calling drm_init().  Some,
       like DRIVER_MODESET can be set later based on user supplied parameters,
@@ -203,8 +203,8 @@
 	<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
 	<listitem>
 	  <para>
-	    DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
-	    handler, DRIVER_IRQ_SHARED indicates whether the device &amp;
+	    DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+	    handler.  DRIVER_IRQ_SHARED indicates whether the device &amp;
 	    handler support shared IRQs (note that this is required of
 	    PCI drivers).
 	  </para>
@@ -214,8 +214,8 @@
 	<term>DRIVER_DMA_QUEUE</term>
 	<listitem>
 	  <para>
-	    If the driver queues DMA requests and completes them
-	    asynchronously, this flag should be set.  Deprecated.
+	    Should be set if the driver queues DMA requests and completes them
+	    asynchronously.  Deprecated.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -238,7 +238,7 @@
     </variablelist>
     <para>
       In this specific case, the driver requires AGP and supports
-      IRQs.  DMA, as we'll see, is handled by device specific ioctls
+      IRQs.  DMA, as discussed later, is handled by device-specific ioctls
       in this case.  It also supports the kernel mode setting APIs, though
       unlike in the actual i915 driver source, this example unconditionally
       exports KMS capability.
@@ -269,36 +269,34 @@
       initial output configuration.
     </para>
     <para>
-      Note that the tasks performed at driver load time must not
-      conflict with DRM client requirements.  For instance, if user
+      If compatibility is a concern (e.g. with drivers converted over
+      to the new interfaces from the old ones), care must be taken to
+      prevent device initialization and control that is incompatible with
+      currently active userspace drivers.  For instance, if user
       level mode setting drivers are in use, it would be problematic
       to perform output discovery &amp; configuration at load time.
-      Likewise, if pre-memory management aware user level drivers are
+      Likewise, if user-level drivers unaware of memory management are
       in use, memory management and command buffer setup may need to
-      be omitted.  These requirements are driver specific, and care
+      be omitted.  These requirements are driver-specific, and care
       needs to be taken to keep both old and new applications and
       libraries working.  The i915 driver supports the "modeset"
       module parameter to control whether advanced features are
-      enabled at load time or in legacy fashion.  If compatibility is
-      a concern (e.g. with drivers converted over to the new interfaces
-      from the old ones), care must be taken to prevent incompatible
-      device initialization and control with the currently active
-      userspace drivers.
+      enabled at load time or in legacy fashion.
     </para>
 
     <sect2>
       <title>Driver private &amp; performance counters</title>
       <para>
 	The driver private hangs off the main drm_device structure and
-	can be used for tracking various device specific bits of
+	can be used for tracking various device-specific bits of
 	information, like register offsets, command buffer status,
 	register state for suspend/resume, etc.  At load time, a
-	driver can simply allocate one and set drm_device.dev_priv
-	appropriately; at unload the driver can free it and set
-	drm_device.dev_priv to NULL.
+	driver may simply allocate one and set drm_device.dev_priv
+	appropriately; it should be freed and drm_device.dev_priv set
+	to NULL when the driver is unloaded.
       </para>
       <para>
-	The DRM supports several counters which can be used for rough
+	The DRM supports several counters which may be used for rough
 	performance characterization.  Note that the DRM stat counter
 	system is not often used by applications, and supporting
 	additional counters is completely optional.
@@ -307,15 +305,15 @@
 	These interfaces are deprecated and should not be used.  If performance
 	monitoring is desired, the developer should investigate and
 	potentially enhance the kernel perf and tracing infrastructure to export
-	GPU related performance information to performance monitoring
-	tools and applications.
+	GPU related performance information for consumption by performance
+	monitoring tools and applications.
       </para>
     </sect2>
 
     <sect2>
       <title>Configuring the device</title>
       <para>
-	Obviously, device configuration will be device specific.
+	Obviously, device configuration is device-specific.
 	However, there are several common operations: finding a
 	device's PCI resources, mapping them, and potentially setting
 	up an IRQ handler.
@@ -323,10 +321,10 @@
       <para>
 	Finding &amp; mapping resources is fairly straightforward.  The
 	DRM wrapper functions, drm_get_resource_start() and
-	drm_get_resource_len() can be used to find BARs on the given
+	drm_get_resource_len(), may be used to find BARs on the given
 	drm_device struct.  Once those values have been retrieved, the
 	driver load function can call drm_addmap() to create a new
-	mapping for the BAR in question.  Note you'll probably want a
+	mapping for the BAR in question.  Note that you probably want a
 	drm_local_map_t in your driver private structure to track any
 	mappings you create.
 <!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
@@ -335,20 +333,20 @@
       <para>
 	if compatibility with other operating systems isn't a concern
 	(DRM drivers can run under various BSD variants and OpenSolaris),
-	native Linux calls can be used for the above, e.g. pci_resource_*
+	native Linux calls may be used for the above, e.g. pci_resource_*
 	and iomap*/iounmap.  See the Linux device driver book for more
 	info.
       </para>
       <para>
-	Once you have a register map, you can use the DRM_READn() and
+	Once you have a register map, you may use the DRM_READn() and
 	DRM_WRITEn() macros to access the registers on your device, or
-	use driver specific versions to offset into your MMIO space
-	relative to a driver specific base pointer (see I915_READ for
-	example).
+	use driver-specific versions to offset into your MMIO space
+	relative to a driver-specific base pointer (see I915_READ for
+	an example).
       </para>
       <para>
 	If your device supports interrupt generation, you may want to
-	setup an interrupt handler at driver load time as well.  This
+	set up an interrupt handler when the driver is loaded.  This
 	is done using the drm_irq_install() function.  If your device
 	supports vertical blank interrupts, it should call
 	drm_vblank_init() to initialize the core vblank handling code before
@@ -357,7 +355,7 @@
       </para>
 <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
       <para>
-	Once your interrupt handler is registered (it'll use your
+	Once your interrupt handler is registered (it uses your
 	drm_driver.irq_handler as the actual interrupt handling
 	function), you can safely enable interrupts on your device,
 	assuming any other state your interrupt handler uses is also
@@ -371,10 +369,10 @@
 	using the pci_map_rom() call, a convenience function that
 	takes care of mapping the actual ROM, whether it has been
 	shadowed into memory (typically at address 0xc0000) or exists
-	on the PCI device in the ROM BAR.  Note that once you've
-	mapped the ROM and extracted any necessary information, be
-	sure to unmap it; on many devices the ROM address decoder is
-	shared with other BARs, so leaving it mapped can cause
+	on the PCI device in the ROM BAR.  Note that after the ROM
+	has been mapped and any necessary information has been extracted,
+	it should be unmapped; on many devices, the ROM address decoder is
+	shared with other BARs, so leaving it mapped could cause
 	undesired behavior like hangs or memory corruption.
 <!--!Fdrivers/pci/rom.c pci_map_rom-->
       </para>
@@ -389,9 +387,9 @@
 	should support a memory manager.
       </para>
       <para>
-	If your driver supports memory management (it should!), you'll
+	If your driver supports memory management (it should!), you
 	need to set that up at load time as well.  How you initialize
-	it depends on which memory manager you're using, TTM or GEM.
+	it depends on which memory manager you're using: TTM or GEM.
       </para>
       <sect3>
 	<title>TTM initialization</title>
@@ -401,7 +399,7 @@
 	  and devices with dedicated video RAM (VRAM), i.e. most discrete
 	  graphics devices.  If your device has dedicated RAM, supporting
 	  TTM is desirable.  TTM also integrates tightly with your
-	  driver specific buffer execution function.  See the radeon
+	  driver-specific buffer execution function.  See the radeon
 	  driver for examples.
 	</para>
 	<para>
@@ -429,21 +427,21 @@
 	  created by the memory manager at runtime.  Your global TTM should
 	  have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
 	  object should be sizeof(struct ttm_mem_global), and the init and
-	  release hooks should point at your driver specific init and
-	  release routines, which will probably eventually call
-	  ttm_mem_global_init and ttm_mem_global_release respectively.
+	  release hooks should point at your driver-specific init and
+	  release routines, which probably eventually call
+	  ttm_mem_global_init and ttm_mem_global_release, respectively.
 	</para>
 	<para>
 	  Once your global TTM accounting structure is set up and initialized
-	  (done by calling ttm_global_item_ref on the global object you
-	  just created), you'll need to create a buffer object TTM to
+	  by calling ttm_global_item_ref() on it,
+	  you need to create a buffer object TTM to
 	  provide a pool for buffer object allocation by clients and the
 	  kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
 	  and its size should be sizeof(struct ttm_bo_global).  Again,
-	  driver specific init and release functions can be provided,
-	  likely eventually calling ttm_bo_global_init and
-	  ttm_bo_global_release, respectively.  Also like the previous
-	  object, ttm_global_item_ref is used to create an initial reference
+	  driver-specific init and release functions may be provided,
+	  likely eventually calling ttm_bo_global_init() and
+	  ttm_bo_global_release(), respectively.  Also, like the previous
+	  object, ttm_global_item_ref() is used to create an initial reference
 	  count for the TTM, which will call your initialization function.
 	</para>
       </sect3>
@@ -453,27 +451,26 @@
 	  GEM is an alternative to TTM, designed specifically for UMA
 	  devices.  It has simpler initialization and execution requirements
 	  than TTM, but has no VRAM management capability.  Core GEM
-	  initialization is comprised of a basic drm_mm_init call to create
+	  is initialized by calling drm_mm_init() to create
 	  a GTT DRM MM object, which provides an address space pool for
-	  object allocation.  In a KMS configuration, the driver will
-	  need to allocate and initialize a command ring buffer following
-	  basic GEM initialization.  Most UMA devices have a so-called
+	  object allocation.  In a KMS configuration, the driver
+	  needs to allocate and initialize a command ring buffer following
+	  core GEM initialization.  A UMA device usually has what is called a
 	  "stolen" memory region, which provides space for the initial
 	  framebuffer and large, contiguous memory regions required by the
-	  device.  This space is not typically managed by GEM, and must
+	  device.  This space is not typically managed by GEM, and it must
 	  be initialized separately into its own DRM MM object.
 	</para>
 	<para>
-	  Initialization will be driver specific, and will depend on
-	  the architecture of the device.  In the case of Intel
+	  Initialization is driver-specific. In the case of Intel
 	  integrated graphics chips like 965GM, GEM initialization can
 	  be done by calling the internal GEM init function,
 	  i915_gem_do_init().  Since the 965GM is a UMA device
-	  (i.e. it doesn't have dedicated VRAM), GEM will manage
+	  (i.e. it doesn't have dedicated VRAM), GEM manages
 	  making regular RAM available for GPU operations.  Memory set
 	  aside by the BIOS (called "stolen" memory by the i915
-	  driver) will be managed by the DRM memrange allocator; the
-	  rest of the aperture will be managed by GEM.
+	  driver) is managed by the DRM memrange allocator; the
+	  rest of the aperture is managed by GEM.
 	  <programlisting>
 	    /* Basic memrange allocator for stolen space (aka vram) */
 	    drm_memrange_init(&amp;dev_priv->vram, 0, prealloc_size);
@@ -483,7 +480,7 @@
 <!--!Edrivers/char/drm/drm_memrange.c-->
 	</para>
 	<para>
-	  Once the memory manager has been set up, we can allocate the
+	  Once the memory manager has been set up, we may allocate the
 	  command buffer.  In the i915 case, this is also done with a
 	  GEM function, i915_gem_init_ringbuffer().
 	</para>
@@ -493,16 +490,25 @@
     <sect2>
       <title>Output configuration</title>
       <para>
-	The final initialization task is output configuration.  This involves
-	finding and initializing the CRTCs, encoders and connectors
-	for your device, creating an initial configuration and
-	registering a framebuffer console driver.
+	The final initialization task is output configuration.  This involves:
+	<itemizedlist>
+	  <listitem>
+	    Finding and initializing the CRTCs, encoders, and connectors
+	    for the device.
+	  </listitem>
+	  <listitem>
+	    Creating an initial configuration.
+	  </listitem>
+	  <listitem>
+	    Registering a framebuffer console driver.
+	  </listitem>
+	</itemizedlist>
       </para>
       <sect3>
 	<title>Output discovery and initialization</title>
 	<para>
-	  Several core functions exist to create CRTCs, encoders and
-	  connectors, namely drm_crtc_init(), drm_connector_init() and
+	  Several core functions exist to create CRTCs, encoders, and
+	  connectors, namely: drm_crtc_init(), drm_connector_init(), and
 	  drm_encoder_init(), along with several "helper" functions to
 	  perform common tasks.
 	</para>
@@ -555,10 +561,10 @@
 	</programlisting>
 	<para>
 	  In the example above (again, taken from the i915 driver), a
-	  CRT connector and encoder combination is created.  A device
-	  specific i2c bus is also created, for fetching EDID data and
+	  CRT connector and encoder combination is created.  A device-specific
+	  i2c bus is also created for fetching EDID data and
 	  performing monitor detection.  Once the process is complete,
-	  the new connector is registered with sysfs, to make its
+	  the new connector is registered with sysfs to make its
 	  properties available to applications.
 	</para>
 	<sect4>
@@ -567,12 +573,12 @@
 	    Since many PC-class graphics devices have similar display output
 	    designs, the DRM provides a set of helper functions to make
 	    output management easier.  The core helper routines handle
-	    encoder re-routing and disabling of unused functions following
-	    mode set.  Using the helpers is optional, but recommended for
+	    encoder re-routing and the disabling of unused functions following
+	    mode setting.  Using the helpers is optional, but recommended for
 	    devices with PC-style architectures (i.e. a set of display planes
 	    for feeding pixels to encoders which are in turn routed to
 	    connectors).  Devices with more complex requirements needing
-	    finer grained management can opt to use the core callbacks
+	    finer grained management may opt to use the core callbacks
 	    directly.
 	  </para>
 	  <para>
@@ -580,17 +586,25 @@
 	  </para>
 	</sect4>
 	<para>
-	  For each encoder, CRTC and connector, several functions must
-	  be provided, depending on the object type.  Encoder objects
-	  need to provide a DPMS (basically on/off) function, mode fixup
-	  (for converting requested modes into native hardware timings),
-	  and prepare, set and commit functions for use by the core DRM
-	  helper functions.  Connector helpers need to provide mode fetch and
-	  validity functions as well as an encoder matching function for
-	  returning an ideal encoder for a given connector.  The core
-	  connector functions include a DPMS callback, (deprecated)
-	  save/restore routines, detection, mode probing, property handling,
-	  and cleanup functions.
+	  Each encoder object needs to provide:
+	  <itemizedlist>
+	    <listitem>
+	      A DPMS (basically on/off) function.
+	    </listitem>
+	    <listitem>
+	      A mode-fixup function (for converting requested modes into
+	      native hardware timings).
+	    </listitem>
+	    <listitem>
+	      Functions (prepare, set, and commit) for use by the core DRM
+	      helper functions.
+	    </listitem>
+	  </itemizedlist>
+	  Connector helpers need to provide functions (mode-fetch, validity,
+	  and encoder-matching) for returning an ideal encoder for a given
+	  connector.  The core connector functions include a DPMS callback,
+	  save/restore routines (deprecated), detection, mode probing,
+	  property handling, and cleanup functions.
 	</para>
 <!--!Edrivers/char/drm/drm_crtc.h-->
 <!--!Edrivers/char/drm/drm_crtc.c-->
@@ -605,23 +619,34 @@
     <title>VBlank event handling</title>
     <para>
       The DRM core exposes two vertical blank related ioctls:
-      DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+      <variablelist>
+        <varlistentry>
+          <term>DRM_IOCTL_WAIT_VBLANK</term>
+          <listitem>
+            <para>
+              This takes a struct drm_wait_vblank structure as its argument,
+              and it is used to block or request a signal when a specified
+              vblank event occurs.
+            </para>
+          </listitem>
+        </varlistentry>
+        <varlistentry>
+          <term>DRM_IOCTL_MODESET_CTL</term>
+          <listitem>
+            <para>
+              This should be called by application level drivers before and
+              after mode setting, since on many devices the vertical blank
+              counter is reset at that time.  Internally, the DRM snapshots
+              the last vblank count when the ioctl is called with the
+              _DRM_PRE_MODESET command, so that the counter won't go backwards
+              (which is dealt with when _DRM_POST_MODESET is used).
+            </para>
+          </listitem>
+        </varlistentry>
+      </variablelist>
 <!--!Edrivers/char/drm/drm_irq.c-->
     </para>
     <para>
-      DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
-      as its argument, and is used to block or request a signal when a
-      specified vblank event occurs.
-    </para>
-    <para>
-      DRM_IOCTL_MODESET_CTL should be called by application level
-      drivers before and after mode setting, since on many devices the
-      vertical blank counter will be reset at that time.  Internally,
-      the DRM snapshots the last vblank count when the ioctl is called
-      with the _DRM_PRE_MODESET command so that the counter won't go
-      backwards (which is dealt with when _DRM_POST_MODESET is used).
-    </para>
-    <para>
       To support the functions above, the DRM core provides several
       helper functions for tracking vertical blank counters, and
       requires drivers to provide several callbacks:
@@ -632,24 +657,24 @@
       register.  The enable and disable vblank callbacks should enable
       and disable vertical blank interrupts, respectively.  In the
       absence of DRM clients waiting on vblank events, the core DRM
-      code will use the disable_vblank() function to disable
-      interrupts, which saves power.  They'll be re-enabled again when
+      code uses the disable_vblank() function to disable
+      interrupts, which saves power.  They are re-enabled again when
       a client calls the vblank wait ioctl above.
     </para>
     <para>
-      Devices that don't provide a count register can simply use an
+      A device that doesn't provide a count register may simply use an
       internal atomic counter incremented on every vertical blank
-      interrupt, and can make their enable and disable vblank
-      functions into no-ops.
+      interrupt (and then treat the enable_vblank() and disable_vblank()
+      callbacks as no-ops).
     </para>
   </sect1>
 
   <sect1>
     <title>Memory management</title>
     <para>
-      The memory manager lies at the heart of many DRM operations, and
-      is also required to support advanced client features like OpenGL
-      pbuffers.  The DRM currently contains two memory managers, TTM
+      The memory manager lies at the heart of many DRM operations; it
+      is required to support advanced client features like OpenGL
+      pbuffers.  The DRM currently contains two memory managers: TTM
       and GEM.
     </para>
 
@@ -679,41 +704,46 @@
       <para>
 	GEM-enabled drivers must provide gem_init_object() and
 	gem_free_object() callbacks to support the core memory
-	allocation routines.  They should also provide several driver
-	specific ioctls to support command execution, pinning, buffer
+	allocation routines.  They should also provide several driver-specific
+	ioctls to support command execution, pinning, buffer
 	read &amp; write, mapping, and domain ownership transfers.
       </para>
       <para>
-	On a fundamental level, GEM involves several operations: memory
-	allocation and freeing, command execution, and aperture management
-	at command execution time.  Buffer object allocation is relatively
+	On a fundamental level, GEM involves several operations:
+	<itemizedlist>
+	  <listitem>Memory allocation and freeing</listitem>
+	  <listitem>Command execution</listitem>
+	  <listitem>Aperture management at command execution time</listitem>
+	</itemizedlist>
+	Buffer object allocation is relatively
 	straightforward and largely provided by Linux's shmem layer, which
 	provides memory to back each object.  When mapped into the GTT
 	or used in a command buffer, the backing pages for an object are
 	flushed to memory and marked write combined so as to be coherent
-	with the GPU.  Likewise, when the GPU finishes rendering to an object,
-	if the CPU accesses it, it must be made coherent with the CPU's view
+	with the GPU.  Likewise, if the CPU accesses an object after the GPU
+	has finished rendering to the object, then the object must be made
+	coherent with the CPU's view
 	of memory, usually involving GPU cache flushing of various kinds.
-	This core CPU&lt;-&gt;GPU coherency management is provided by the GEM
-	set domain function, which evaluates an object's current domain and
+	This core CPU&lt;-&gt;GPU coherency management is provided by a
+	device-specific ioctl, which evaluates an object's current domain and
 	performs any necessary flushing or synchronization to put the object
 	into the desired coherency domain (note that the object may be busy,
-	i.e. an active render target; in that case the set domain function
-	will block the client and wait for rendering to complete before
+	i.e. an active render target; in that case, setting the domain
+	blocks the client and waits for rendering to complete before
 	performing any necessary flushing operations).
       </para>
       <para>
 	Perhaps the most important GEM function is providing a command
 	execution interface to clients.  Client programs construct command
-	buffers containing references to previously allocated memory objects
-	and submit them to GEM.  At that point, GEM will take care to bind
+	buffers containing references to previously allocated memory objects,
+	and then submit them to GEM.  At that point, GEM takes care to bind
 	all the objects into the GTT, execute the buffer, and provide
 	necessary synchronization between clients accessing the same buffers.
 	This often involves evicting some objects from the GTT and re-binding
 	others (a fairly expensive operation), and providing relocation
 	support which hides fixed GTT offsets from clients.  Clients must
 	take care not to submit command buffers that reference more objects
-	than can fit in the GTT or GEM will reject them and no rendering
+	than can fit in the GTT; otherwise, GEM will reject them and no rendering
 	will occur.  Similarly, if several objects in the buffer require
 	fence registers to be allocated for correct rendering (e.g. 2D blits
 	on pre-965 chips), care must be taken not to require more fence
@@ -729,7 +759,7 @@
     <title>Output management</title>
     <para>
       At the core of the DRM output management code is a set of
-      structures representing CRTCs, encoders and connectors.
+      structures representing CRTCs, encoders, and connectors.
     </para>
     <para>
       A CRTC is an abstraction representing a part of the chip that
@@ -765,21 +795,19 @@
   <sect1>
     <title>Framebuffer management</title>
     <para>
-      In order to set a mode on a given CRTC, encoder and connector
-      configuration, clients need to provide a framebuffer object which
-      will provide a source of pixels for the CRTC to deliver to the encoder(s)
-      and ultimately the connector(s) in the configuration.  A framebuffer
-      is fundamentally a driver specific memory object, made into an opaque
-      handle by the DRM addfb function.  Once an fb has been created this
-      way it can be passed to the KMS mode setting routines for use in
-      a configuration.
+      Clients need to provide a framebuffer object which provides a source
+      of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+      connector(s). A framebuffer is fundamentally a driver-specific memory
+      object, made into an opaque handle by the DRM's addfb() function.
+      Once a framebuffer has been created this way, it may be passed to the
+      KMS mode setting routines for use in a completed configuration.
     </para>
   </sect1>
 
   <sect1>
     <title>Command submission &amp; fencing</title>
     <para>
-      This should cover a few device specific command submission
+      This should cover a few device-specific command submission
       implementations.
     </para>
   </sect1>
@@ -789,7 +817,7 @@
     <para>
       The DRM core provides some suspend/resume code, but drivers
       wanting full suspend/resume support should provide save() and
-      restore() functions.  These will be called at suspend,
+      restore() functions.  These are called at suspend,
       hibernate, or resume time, and should perform any state save or
       restore required by your device across suspend or hibernate
       states.
@@ -812,8 +840,8 @@
     <para>
       The DRM core exports several interfaces to applications,
       generally intended to be used through corresponding libdrm
-      wrapper functions.  In addition, drivers export device specific
-      interfaces for use by userspace drivers &amp; device aware
+      wrapper functions.  In addition, drivers export device-specific
+      interfaces for use by userspace drivers &amp; device-aware
       applications through ioctls and sysfs files.
     </para>
     <para>
@@ -822,8 +850,8 @@
       management, memory management, and output management.
     </para>
     <para>
-      Cover generic ioctls and sysfs layout here.  Only need high
-      level info, since man pages will cover the rest.
+      Cover generic ioctls and sysfs layout here.  We only need high-level
+      info, since man pages should cover the rest.
     </para>
   </chapter>
 
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 91410b6..b68698f 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2486,6 +2486,9 @@
         <listitem>
 	  <para>Flash API. <xref linkend="flash-controls" /></para>
         </listitem>
+        <listitem>
+	  <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
+        </listitem>
       </itemizedlist>
     </section>
 
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 23fdf79..3bc5ee8 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -232,8 +232,9 @@
 	    <entry>Enables a power line frequency filter to avoid
 flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
 <constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1) and
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2).</entry>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_HUE_AUTO</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index c57d1ec..3f47df1 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -927,6 +927,33 @@
 Applications set or clear this flag before calling the
 <constant>VIDIOC_QBUF</constant> ioctl.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry>
+	    <entry>0x0400</entry>
+	    <entry>The buffer has been prepared for I/O and can be queued by the
+application. Drivers set or clear this flag when the
+<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link>, <link
+	  linkend="vidioc-qbuf">VIDIOC_PREPARE_BUF</link>, <link
+	  linkend="vidioc-qbuf">VIDIOC_QBUF</link> or <link
+	  linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
+	    <entry>0x0400</entry>
+	    <entry>Caches do not have to be invalidated for this buffer.
+Typically applications shall use this flag if the data captured in the buffer
+is not going to be touched by the CPU, instead the buffer will, probably, be
+passed on to a DMA-capable hardware unit for further processing or output.
+</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
+	    <entry>0x0800</entry>
+	    <entry>Caches do not have to be cleaned for this buffer.
+Typically applications shall use this flag for output buffers if the data
+in this buffer has not been created by the CPU but by some DMA-capable unit,
+in which case caches have not been used.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 40132c2..2ab365c 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -469,6 +469,7 @@
     &sub-close;
     &sub-ioctl;
     <!-- All ioctls go here. -->
+    &sub-create-bufs;
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
     &sub-dbg-g-register;
@@ -511,6 +512,7 @@
     &sub-queryctrl;
     &sub-query-dv-preset;
     &sub-querystd;
+    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
new file mode 100644
index 0000000..73ae8a6
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -0,0 +1,139 @@
+<refentry id="vidioc-create-bufs">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_CREATE_BUFS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_CREATE_BUFS</refname>
+    <refpurpose>Create buffers for Memory Mapped or User Pointer I/O</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_create_buffers *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_CREATE_BUFS</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>This ioctl is used to create buffers for <link linkend="mmap">memory
+mapped</link> or <link linkend="userp">user pointer</link>
+I/O. It can be used as an alternative or in addition to the
+<constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter control over buffers
+is required. This ioctl can be called multiple times to create buffers of
+different sizes.</para>
+
+    <para>To allocate device buffers applications initialize relevant fields of
+the <structname>v4l2_create_buffers</structname> structure. They set the
+<structfield>type</structfield> field in the
+<structname>v4l2_format</structname> structure, embedded in this
+structure, to the respective stream or buffer type.
+<structfield>count</structfield> must be set to the number of required buffers.
+<structfield>memory</structfield> specifies the required I/O method. The
+<structfield>format</structfield> field shall typically be filled in using
+either the <constant>VIDIOC_TRY_FMT</constant> or
+<constant>VIDIOC_G_FMT</constant> ioctl(). Additionally, applications can adjust
+<structfield>sizeimage</structfield> fields to fit their specific needs. The
+<structfield>reserved</structfield> array must be zeroed.</para>
+
+    <para>When the ioctl is called with a pointer to this structure the driver
+will attempt to allocate up to the requested number of buffers and store the
+actual number allocated and the starting index in the
+<structfield>count</structfield> and the <structfield>index</structfield> fields
+respectively. On return <structfield>count</structfield> can be smaller than
+the number requested. The driver may also increase buffer sizes if required,
+however, it will not update <structfield>sizeimage</structfield> field values.
+The user has to use <constant>VIDIOC_QUERYBUF</constant> to retrieve that
+information.</para>
+
+    <table pgwide="1" frame="none" id="v4l2-create-buffers">
+      <title>struct <structname>v4l2_create_buffers</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>index</structfield></entry>
+	    <entry>The starting buffer index, returned by the driver.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>count</structfield></entry>
+	    <entry>The number of buffers requested or granted.</entry>
+	  </row>
+	  <row>
+	    <entry>&v4l2-memory;</entry>
+	    <entry><structfield>memory</structfield></entry>
+	    <entry>Applications set this field to
+<constant>V4L2_MEMORY_MMAP</constant> or
+<constant>V4L2_MEMORY_USERPTR</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>&v4l2-format;</entry>
+	    <entry><structfield>format</structfield></entry>
+	    <entry>Filled in by the application, preserved by the driver.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[8]</entry>
+	    <entry>A place holder for future extensions.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>ENOMEM</errorcode></term>
+	<listitem>
+	  <para>No memory to allocate buffers for <link linkend="mmap">memory
+mapped</link> I/O.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The buffer type (<structfield>type</structfield> field) or the
+requested I/O method (<structfield>memory</structfield>) is not
+supported.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
new file mode 100644
index 0000000..7bde698
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
@@ -0,0 +1,88 @@
+<refentry id="vidioc-prepare-buf">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_PREPARE_BUF</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_PREPARE_BUF</refname>
+    <refpurpose>Prepare a buffer for I/O</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_buffer *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_PREPARE_BUF</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>Applications can optionally call the
+<constant>VIDIOC_PREPARE_BUF</constant> ioctl to pass ownership of the buffer
+to the driver before actually enqueuing it, using the
+<constant>VIDIOC_QBUF</constant> ioctl, and to prepare it for future I/O.
+Such preparations may include cache invalidation or cleaning. Performing them
+in advance saves time during the actual I/O. In case such cache operations are
+not required, the application can use one of
+<constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant> and
+<constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant> flags to skip the respective
+step.</para>
+
+    <para>The <structname>v4l2_buffer</structname> structure is
+specified in <xref linkend="buffer" />.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>File I/O is in progress.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The buffer <structfield>type</structfield> is not
+supported, or the <structfield>index</structfield> is out of bounds,
+or no buffers have been allocated yet, or the
+<structfield>userptr</structfield> or
+<structfield>length</structfield> are invalid.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 17910e2..0c674be 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -572,7 +572,7 @@
 			</para>
 			<para>
 				The simplest way to activate the FLASH based bad block table support 
-				is to set the option NAND_USE_FLASH_BBT in the option field of
+				is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
 				the nand chip structure before calling nand_scan(). For AG-AND
 				chips is this done by default.
 				This activates the default FLASH based bad block table functionality 
@@ -773,20 +773,6 @@
 				done according to the default builtin scheme.
 			</para>
 		</sect2>
-		<sect2 id="User_space_placement_selection">
-			<title>User space placement selection</title>
-		<para>
-			All non ecc functions like mtd->read and mtd->write use an internal 
-			structure, which can be set by an ioctl. This structure is preset 
-			to the autoplacement default.
-	     		<programlisting>
-	ioctl (fd, MEMSETOOBSEL, oobsel);
-	     		</programlisting>
-			oobsel is a pointer to a user supplied structure of type
-			nand_oobconfig. The contents of this structure must match the 
-			criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
-		</para>
-		</sect2>
 	</sect1>	
 	<sect1 id="Spare_area_autoplacement_default">
 		<title>Spare area autoplacement default schemes</title>
@@ -1158,9 +1144,6 @@
 		These constants are defined in nand.h. They are ored together to describe
 		the functionality.
      		<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT	0x00010000
 /* The hw ecc generator provides a syndrome instead a ecc value on read 
  * This can only work if we have the ecc bytes directly behind the 
  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 54883de..ac3d001 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -521,6 +521,11 @@
 
 <itemizedlist>
 <listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
+<listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
 card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical
@@ -553,7 +558,7 @@
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index 71cfbdc..3b2612e 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -1,6 +1,6 @@
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
-assigned globally at boot time only presently.
+'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
+globally at boot time only presently.
 
 Each io queue has a set of io scheduler tunables associated with it. These
 tunables control how the io scheduler works. You can find these entries
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index c00c6a5..b79d0a1 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -78,6 +78,16 @@
 /dev/cciss/c1d1p2		Controller 1, disk 1, partition 2
 /dev/cciss/c1d1p3		Controller 1, disk 1, partition 3
 
+CCISS simple mode support
+-------------------------
+
+The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
+from putting the controller into "performant" mode. The difference is that
+with simple mode, each command completion requires an interrupt, while with
+"performant mode" (the default, and ordinarily better performing) it is
+possible to have multiple command completions indicated by a single
+interrupt.
+
 SCSI tape drive and medium changer support
 ------------------------------------------
 
@@ -88,14 +98,12 @@
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
-time.  The driver must be directed to dynamically engage the SCSI core via 
-the /proc filesystem entry which the "block" side of the driver creates as 
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
-the SCSI core may not yet be initialized (because the driver is a block 
-driver) and attempting to register it with the SCSI core in such a case 
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected.  The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
+
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cd67e90..9c452ef 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -454,8 +454,8 @@
 move it into a new cgroup (possibly the root cgroup) by writing to the
 new cgroup's tasks file.
 
-Note: If the ns cgroup is active, moving a process to another cgroup can
-fail.
+Note: Due to some restrictions enforced by some cgroup subsystems, moving
+a process to another cgroup can fail.
 
 2.3 Mounting hierarchies by name
 --------------------------------
diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt
index c21d777..7e62de1 100644
--- a/Documentation/cgroups/freezer-subsystem.txt
+++ b/Documentation/cgroups/freezer-subsystem.txt
@@ -33,9 +33,9 @@
 
 	From a second, unrelated bash shell:
 	$ kill -SIGSTOP 16690
-	$ kill -SIGCONT 16990
+	$ kill -SIGCONT 16690
 
-	<at this point 16990 exits and causes 16644 to exit too>
+	<at this point 16690 exits and causes 16644 to exit too>
 
 This happens because bash can observe both signals and choose how it
 responds to them.
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
new file mode 100644
index 0000000..79caa56
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
@@ -0,0 +1,17 @@
+* Calxeda SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "calxeda,hb-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Example:
+        sata@ffe08000 {
+		compatible = "calxeda,hb-ahci";
+                reg = <0xffe08000 0x1000>;
+                interrupts = <115>;
+        };
+
diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
new file mode 100644
index 0000000..ef66ddd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
@@ -0,0 +1,14 @@
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash@1 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+	spi-max-frequency = <25000000>;
+	reg = <1>;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 39e9415..380914e 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
 * Board Control and Status (BCSR)
 
 Required properties:
@@ -12,25 +17,26 @@
 		reg = <f8000000 8000>;
 	};
 
-* Freescale on board FPGA
+* Freescale on-board FPGA
 
 This is the memory-mapped registers for on board FPGA.
 
 Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
-  set.
+- compatible: should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
 - interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
 
-Example (MPC8610HPCD):
+Example (P1022DS):
 
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-		interrupt-parent = <&mpic>;
-		interrupts = <8 8>;
-	};
+	 board-control@3,0 {
+		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		 reg = <3 0 0x30>;
+		 interrupt-parent = <&mpic>;
+		 interrupts = <8 8 0 0>;
+	 };
 
 * Freescale BCSR GPIO banks
 
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
new file mode 100644
index 0000000..9d54eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -0,0 +1,395 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change.  Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr" and "simple-bus".
+	The DCSR space exists in the memory-mapped bus.
+
+	- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing physical addresses in child nodes.
+
+	- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing the size of physical addresses in
+	child nodes.
+
+	- ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the physical address
+	range of the DCSR space.
+
+EXAMPLE
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-epu"
+
+	- interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by the EPU.
+	The value of the interrupts property consists of three
+	interrupt specifiers. The format of the specifier is defined
+	by the binding document describing the node's interrupt parent.
+
+	The EPU counters can be configured to assert the performance
+	monitor interrupt signal based on either counter overflow or value
+	match. Which counter asserted the interrupt is captured in an EPU
+	Counter Interrupt Status Register (EPCPUISR).
+
+	The EPU unit can also be configured to assert either or both of
+	two interrupt signals based on debug event sources within the SoC.
+	The interrupt signals are epu_xt_int0 and epu_xt_int1.
+	Which event source asserted the interrupt is captured in an EPU
+	Interrupt Status Register (EPISR0,EPISR1).
+
+	Interrupt numbers are lised in order (perfmon, event0, event1).
+
+	- interrupt-parent
+	Usage: required
+	Value type: <phandle>
+	Definition: A single <phandle> value that points
+	to the interrupt parent to which the child domain
+	is being mapped. Value must be "&mpic"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		interrupt-parent = <&mpic>;
+		reg = <0x0 0x1000>;
+	};
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-npc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The Nexus Port controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the Nexus Port Controller
+	control and status registers.
+
+	The second register range describes the Nexus Port Controller
+	internal trace buffer. The NPC trace buffer is a small memory buffer
+	which stages the nexus trace data for transmission via the Aurora port
+	or to a DDR based trace buffer. In some configurations the NPC trace
+	buffer can be the only trace buffer used.
+
+
+EXAMPLE
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-nxc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-corenet"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The CoreNet Debug controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the CoreNet Debug Controller
+	functionalty to perform transaction and transaction attribute matches.
+
+	The second register range describes the CoreNet Debug Controller
+	functionalty to trigger event notifications and debug traces.
+
+EXAMPLE
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+	generic compatible string "fsl,dcsr-dpaa".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+	generic compatible string "fsl,dcsr-ocn".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-ddr"
+
+	- dev-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its
+	component controller.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+	generic compatible string "fsl,dcsr-nal".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+	generic compatible string "fsl,dcsr-rcpm".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the cpu
+	of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+	generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+	- cpu-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its cpu.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+
+=======================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 70558c3..5d586e1 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -25,6 +25,16 @@
   are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
   to MPIC.
 
+Optional properties:
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+  is used for MSI messaging.  The address of MSIIR in PCI address space is
+  the MSI message address.
+
+  This property may be used in virtualized environments where the hypervisor
+  has created an alternate mapping for the MSIR block.  See below for an
+  explanation.
+
+
 Example:
 	msi@41600 {
 		compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
@@ -41,3 +51,35 @@
 			0xe7 0>;
 		interrupt-parent = <&mpic>;
 	};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR.  The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window.  The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical").  However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address.  Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives).  The first subwindow after the end of guest memory is used for
+this.  The address specified in the msi-address-64 property is the PCI
+address of MSIIR.  The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index e855278..874921e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@
 ramtron	Ramtron International
 samsung	Samsung Semiconductor
 schindler	Schindler
+sil	Silicon Image
 simtek
 sirf	SiRF Technology, Inc.
 stericsson	ST-Ericsson
diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt
index 64087c3..7671352 100644
--- a/Documentation/filesystems/btrfs.txt
+++ b/Documentation/filesystems/btrfs.txt
@@ -63,8 +63,8 @@
 Userspace tools for creating and manipulating Btrfs file systems are
 available from the git repository at the following location:
 
- http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
- git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
+ http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
 
 These include the following tools:
 
diff --git a/Documentation/filesystems/hfs.txt b/Documentation/filesystems/hfs.txt
index bd0fa770..d096df6 100644
--- a/Documentation/filesystems/hfs.txt
+++ b/Documentation/filesystems/hfs.txt
@@ -1,3 +1,4 @@
+Note: This filesystem doesn't have a maintainer.
 
 Macintosh HFS Filesystem for Linux
 ==================================
@@ -76,8 +77,6 @@
 Credits
 =======
 
-The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU)
-and is now maintained by Roman Zippel (roman@ardistech.com) at Ardis
-Technologies.
-Roman rewrote large parts of the code and brought in btree routines derived
-from Brad Boyer's hfsplus driver (also maintained by Roman now).
+The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU).
+Roman Zippel (roman@ardistech.com) rewrote large parts of the code and brought
+in btree routines derived from Brad Boyer's hfsplus driver.
diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.txt
index 59a919f..cfd0271 100644
--- a/Documentation/filesystems/inotify.txt
+++ b/Documentation/filesystems/inotify.txt
@@ -194,7 +194,8 @@
 Each watch is associated with an inotify_watch structure.  Watches are chained
 off of each associated inotify_handle and each associated inode.
 
-See fs/inotify.c and fs/inotify_user.c for the locking and lifetime rules.
+See fs/notify/inotify/inotify_fsnotify.c and fs/notify/inotify/inotify_user.c
+for the locking and lifetime rules.
 
 
 (vi) Rationale
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 76ffef9..3f44dbd 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -14,6 +14,10 @@
     Prefix: 'w83627dhg'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: not available
+  * Winbond W83627UHG
+    Prefix: 'w83627uhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: available from www.nuvoton.com
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -42,14 +46,13 @@
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P, W83667HG, W83667HG-B, W83667HG-I (NCT6775F),
-and NCT6776F super I/O chips. We will refer to them collectively as
-Winbond chips.
+W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
+(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
+as Winbond chips.
 
-The chips implement three temperature sensors (up to four for 667HG-B, and nine
-for NCT6775F and NCT6776F), five fan rotation speed sensors, ten analog voltage
-sensors (only nine for the 627DHG), one VID (6 pins for the 627EHF/EHG, 8 pins
-for the 627DHG and 667HG), alarms with beep warnings (control unimplemented),
+The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
+(except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
 
 The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are
@@ -86,17 +89,16 @@
 
 temp1 -> pwm1
 temp2 -> pwm2
-temp3 -> pwm3
+temp3 -> pwm3 (not on 627UHG)
 prog  -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
 	       supported by the driver)
 
 /sys files
 ----------
 
-name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
-       it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
-       for the W83667HG and W83667HG-B it is set to "w83667hg", for NCT6775F it
-       is set to "nct6775", and for NCT6776F it is set to "nct6776".
+name - this is a standard hwmon device entry, it contains the name of
+       the device (see the prefix in the list of supported devices at
+       the top of this file)
 
 pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
 	   0 (stop) to 255 (full)
diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt
index 7dcd1a4..a903ee5 100644
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -39,23 +39,20 @@
      in case an unused hwspinlock isn't available. Users of this
      API will usually want to communicate the lock's id to the remote core
      before it can be used to achieve synchronization.
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
    - assign a specific hwspinlock id and return its address, or NULL
      if that hwspinlock is already in use. Usually board code will
      be calling this function in order to reserve specific hwspinlock
      ids for predefined purposes.
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   int hwspin_lock_free(struct hwspinlock *hwlock);
    - free a previously-assigned hwspinlock; returns 0 on success, or an
      appropriate error code on failure (e.g. -EINVAL if the hwspinlock
      is already free).
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
    - lock a previously-assigned hwspinlock with a timeout limit (specified in
@@ -230,45 +227,62 @@
 
 4. API for implementors
 
-  int hwspin_lock_register(struct hwspinlock *hwlock);
+  int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+		const struct hwspinlock_ops *ops, int base_id, int num_locks);
    - to be called from the underlying platform-specific implementation, in
-     order to register a new hwspinlock instance. Can be called from an atomic
-     context (this function will not sleep) but not from within interrupt
-     context. Returns 0 on success, or appropriate error code on failure.
+     order to register a new hwspinlock device (which is usually a bank of
+     numerous locks). Should be called from a process context (this function
+     might sleep).
+     Returns 0 on success, or appropriate error code on failure.
 
-  struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+  int hwspin_lock_unregister(struct hwspinlock_device *bank);
    - to be called from the underlying vendor-specific implementation, in order
-     to unregister an existing (and unused) hwspinlock instance.
-     Can be called from an atomic context (will not sleep) but not from
-     within interrupt context.
+     to unregister an hwspinlock device (which is usually a bank of numerous
+     locks).
+     Should be called from a process context (this function might sleep).
      Returns the address of hwspinlock on success, or NULL on error (e.g.
      if the hwspinlock is sill in use).
 
-5. struct hwspinlock
+5. Important structs
 
-This struct represents an hwspinlock instance. It is registered by the
-underlying hwspinlock implementation using the hwspin_lock_register() API.
+struct hwspinlock_device is a device which usually contains a bank
+of hardware locks. It is registered by the underlying hwspinlock
+implementation using the hwspin_lock_register() API.
 
 /**
- * struct hwspinlock - vendor-specific hwspinlock implementation
- *
- * @dev: underlying device, will be used with runtime PM api
- * @ops: vendor-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
- * @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
  */
-struct hwspinlock {
+struct hwspinlock_device {
 	struct device *dev;
 	const struct hwspinlock_ops *ops;
-	int id;
-	spinlock_t lock;
-	struct module *owner;
+	int base_id;
+	int num_locks;
+	struct hwspinlock lock[0];
 };
 
-The underlying implementation is responsible to assign the dev, ops, id and
-owner members. The lock member, OTOH, is initialized and used by the hwspinlock
-core.
+struct hwspinlock_device contains an array of hwspinlock structs, each
+of which represents a single hardware lock:
+
+/**
+ * struct hwspinlock - this struct represents a single hwspinlock instance
+ * @bank: the hwspinlock_device structure which owns this lock
+ * @lock: initialized and used by hwspinlock core
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
+ */
+struct hwspinlock {
+	struct hwspinlock_device *bank;
+	spinlock_t lock;
+	void *priv;
+};
+
+When registering a bank of locks, the hwspinlock driver only needs to
+set the priv members of the locks. The rest of the members are set and
+initialized by the hwspinlock core itself.
 
 6. Implementation callbacks
 
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index e989070..cdfe139 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3ff0dad..9d66682 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -411,9 +411,9 @@
 
 0x1004	0x03	FN+F4		Sleep button (ACPI sleep button
 				semantics, i.e. sleep-to-RAM).
-				It is always generate some kind
+				It always generates some kind
 				of event, either the hot key
-				event or a ACPI sleep button
+				event or an ACPI sleep button
 				event. The firmware may
 				refuse to generate further FN+F4
 				key presses until a S3 or S4 ACPI
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 4996586..79699c2 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -61,8 +61,8 @@
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
 blink_set() function (see <linux/leds.h>). To set an LED to blinking,
-however, it is better to use use the API function led_blink_set(),
-as it will check and implement software fallback if necessary.
+however, it is better to use the API function led_blink_set(), as it
+will check and implement software fallback if necessary.
 
 To turn off blinking again, use the API function led_brightness_set()
 as that will not just set the LED brightness but also stop any software
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index cb7f314..f049a1c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -20,7 +20,7 @@
 	default FALSE
 
 min_pmtu - INTEGER
-	default 562 - minimum discovered Path MTU
+	default 552 - minimum discovered Path MTU
 
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index 4ccdbca..f2a2488 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -15,6 +15,23 @@
         enabled and the variable is automatically set to 2, otherwise
         the strategy is disabled and the variable is  set  to 1.
 
+conntrack - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	If set, maintain connection tracking entries for
+	connections handled by IPVS.
+
+	This should be enabled if connections handled by IPVS are to be
+	also handled by stateful firewall rules. That is, iptables rules
+	that make use of connection tracking.  It is a performance
+	optimisation to disable this setting otherwise.
+
+	Connections handled by the IPVS FTP application module
+	will have connection tracking entries regardless of this setting.
+
+	Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled.
+
 cache_bypass - BOOLEAN
         0 - disabled (default)
         not 0 - enabled
@@ -39,7 +56,7 @@
 	11         - IPVS packet handling (ip_vs_in/ip_vs_out)
 	12 or more - packet traversal
 
-	Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG
+	Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled.
 
 	Higher debugging levels include the messages for lower debugging
 	levels, so setting debug level 2, includes level 0, 1 and 2
@@ -123,13 +140,11 @@
 secure_tcp - INTEGER
         0  - disabled (default)
 
-        The secure_tcp defense is to use a more complicated state
-        transition table and some possible short timeouts of each
-        state. In the VS/NAT, it delays the entering the ESTABLISHED
-        until the real server starts to send data and ACK packet
-        (after 3-way handshake).
+	The secure_tcp defense is to use a more complicated TCP state
+	transition table. For VS/NAT, it also delays entering the
+	TCP ESTABLISHED state until the three way handshake is completed.
 
-        The value definition is the same as that of drop_entry or
+        The value definition is the same as that of drop_entry and
         drop_packet.
 
 sync_threshold - INTEGER
@@ -141,3 +156,36 @@
         synchronized, every time the number of its incoming packets
         modulus 50 equals the threshold. The range of the threshold is
         from 0 to 49.
+
+snat_reroute - BOOLEAN
+	0 - disabled
+	not 0 - enabled (default)
+
+	If enabled, recalculate the route of SNATed packets from
+	realservers so that they are routed as if they originate from the
+	director. Otherwise they are routed as if they are forwarded by the
+	director.
+
+	If policy routing is in effect then it is possible that the route
+	of a packet originating from a director is routed differently to a
+	packet being forwarded by the director.
+
+	If policy routing is not in effect then the recalculated route will
+	always be the same as the original route so it is an optimisation
+	to disable snat_reroute and avoid the recalculation.
+
+sync_version - INTEGER
+	default 1
+
+	The version of the synchronisation protocol used when sending
+	synchronisation messages.
+
+	0 selects the original synchronisation protocol (version 0). This
+	should be used when sending synchronisation messages to a legacy
+	system that only understands the original synchronisation protocol.
+
+	1 selects the current synchronisation protocol (version 1). This
+	should be used where possible.
+
+	Kernels with this sync_version entry are able to receive messages
+	of both version 1 and version 2 of the synchronisation protocol.
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index 6fe9001..13032c0 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -263,6 +263,8 @@
  12: 'I' if the kernel is working around a severe bug in the platform
      firmware (BIOS or similar).
 
+ 13: 'O' if an externally-built ("out-of-tree") module has been loaded.
+
 The primary reason for the 'Tainted: ' string is to tell kernel
 debuggers if this is a clean kernel or if anything unusual has
 occurred.  Tainting is permanent: even if an offending module is
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 646a89e..3139fb5 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -123,9 +123,10 @@
 Subsystem-Level Methods
 -----------------------
 The core methods to suspend and resume devices reside in struct dev_pm_ops
-pointed to by the pm member of struct bus_type, struct device_type and
-struct class.  They are mostly of interest to the people writing infrastructure
-for buses, like PCI or USB, or device type and device class drivers.
+pointed to by the ops member of struct dev_pm_domain, or by the pm member of
+struct bus_type, struct device_type and struct class.  They are mostly of
+interest to the people writing infrastructure for platforms and buses, like PCI
+or USB, or device type and device class drivers.
 
 Bus drivers implement these methods as appropriate for the hardware and the
 drivers using it; PCI works differently from USB, and so on.  Not many people
@@ -139,41 +140,57 @@
 
 /sys/devices/.../power/wakeup files
 -----------------------------------
-All devices in the driver model have two flags to control handling of wakeup
-events (hardware signals that can force the device and/or system out of a low
-power state).  These flags are initialized by bus or device driver code using
+All device objects in the driver model contain fields that control the handling
+of system wakeup events (hardware signals that can force the system out of a
+sleep state).  These fields are initialized by bus or device driver code using
 device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
 include/linux/pm_wakeup.h.
 
-The "can_wakeup" flag just records whether the device (and its driver) can
+The "power.can_wakeup" flag just records whether the device (and its driver) can
 physically support wakeup events.  The device_set_wakeup_capable() routine
-affects this flag.  The "should_wakeup" flag controls whether the device should
-try to use its wakeup mechanism.  device_set_wakeup_enable() affects this flag;
-for the most part drivers should not change its value.  The initial value of
-should_wakeup is supposed to be false for the majority of devices; the major
-exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
-(wake-on-LAN) feature has been set up with ethtool.  It should also default
-to true for devices that don't generate wakeup requests on their own but merely
-forward wakeup requests from one bus to another (like PCI bridges).
+affects this flag.  The "power.wakeup" field is a pointer to an object of type
+struct wakeup_source used for controlling whether or not the device should use
+its system wakeup mechanism and for notifying the PM core of system wakeup
+events signaled by the device.  This object is only present for wakeup-capable
+devices (i.e. devices whose "can_wakeup" flags are set) and is created (or
+removed) by device_set_wakeup_capable().
 
 Whether or not a device is capable of issuing wakeup events is a hardware
 matter, and the kernel is responsible for keeping track of it.  By contrast,
 whether or not a wakeup-capable device should issue wakeup events is a policy
 decision, and it is managed by user space through a sysfs attribute: the
-power/wakeup file.  User space can write the strings "enabled" or "disabled" to
-set or clear the "should_wakeup" flag, respectively.  This file is only present
-for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
-and is created (or removed) by device_set_wakeup_capable().  Reads from the
-file will return the corresponding string.
+"power/wakeup" file.  User space can write the strings "enabled" or "disabled"
+to it to indicate whether or not, respectively, the device is supposed to signal
+system wakeup.  This file is only present if the "power.wakeup" object exists
+for the given device and is created (or removed) along with that object, by
+device_set_wakeup_capable().  Reads from the file will return the corresponding
+string.
 
-The device_may_wakeup() routine returns true only if both flags are set.
+The "power/wakeup" file is supposed to contain the "disabled" string initially
+for the majority of devices; the major exceptions are power buttons, keyboards,
+and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with
+ethtool.  It should also default to "enabled" for devices that don't generate
+wakeup requests on their own but merely forward wakeup requests from one bus to
+another (like PCI Express ports).
+
+The device_may_wakeup() routine returns true only if the "power.wakeup" object
+exists and the corresponding "power/wakeup" file contains the string "enabled".
 This information is used by subsystems, like the PCI bus type code, to see
 whether or not to enable the devices' wakeup mechanisms.  If device wakeup
 mechanisms are enabled or disabled directly by drivers, they also should use
 device_may_wakeup() to decide what to do during a system sleep transition.
-However for runtime power management, wakeup events should be enabled whenever
-the device and driver both support them, regardless of the should_wakeup flag.
+Device drivers, however, are not supposed to call device_set_wakeup_enable()
+directly in any case.
 
+It ought to be noted that system wakeup is conceptually different from "remote
+wakeup" used by runtime power management, although it may be supported by the
+same physical mechanism.  Remote wakeup is a feature allowing devices in
+low-power states to trigger specific interrupts to signal conditions in which
+they should be put into the full-power state.  Those interrupts may or may not
+be used to signal system wakeup events, depending on the hardware design.  On
+some systems it is impossible to trigger them from system sleep states.  In any
+case, remote wakeup should always be enabled for runtime power management for
+all devices and drivers that support it.
 
 /sys/devices/.../power/control files
 ------------------------------------
@@ -249,20 +266,31 @@
 support all these callbacks and not all drivers use all the callbacks.  The
 various phases always run after tasks have been frozen and before they are
 unfrozen.  Furthermore, the *_noirq phases run at a time when IRQ handlers have
-been disabled (except for those marked with the IRQ_WAKEUP flag).
+been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
 
-All phases use bus, type, or class callbacks (that is, methods defined in
-dev->bus->pm, dev->type->pm, or dev->class->pm).  These callbacks are mutually
-exclusive, so if the device type provides a struct dev_pm_ops object pointed to
-by its pm field (i.e. both dev->type and dev->type->pm are defined), the
-callbacks included in that object (i.e. dev->type->pm) will be used.  Otherwise,
-if the class provides a struct dev_pm_ops object pointed to by its pm field
-(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
-callbacks from that object (i.e. dev->class->pm).  Finally, if the pm fields of
-both the device type and class objects are NULL (or those objects do not exist),
-the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
-will be used (this allows device types to override callbacks provided by bus
-types or classes if necessary).
+All phases use PM domain, bus, type, or class callbacks (that is, methods
+defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
+These callbacks are regarded by the PM core as mutually exclusive.  Moreover,
+PM domain callbacks always take precedence over bus, type and class callbacks,
+while type callbacks take precedence over bus and class callbacks, and class
+callbacks take precedence over bus callbacks.  To be precise, the following
+rules are used to determine which callback to execute in the given phase:
+
+    1.	If dev->pm_domain is present, the PM core will attempt to execute the
+	callback included in dev->pm_domain->ops.  If that callback is not
+	present, no action will be carried out for the given device.
+
+    2.	Otherwise, if both dev->type and dev->type->pm are present, the callback
+	included in dev->type->pm will be executed.
+
+    3.	Otherwise, if both dev->class and dev->class->pm are present, the
+	callback included in dev->class->pm will be executed.
+
+    4.	Otherwise, if both dev->bus and dev->bus->pm are present, the callback
+	included in dev->bus->pm will be executed.
+
+This allows PM domains and device types to override callbacks provided by bus
+types or device classes if necessary.
 
 These callbacks may in turn invoke device- or driver-specific methods stored in
 dev->driver->pm, but they don't have to.
@@ -283,9 +311,8 @@
 
 	After the prepare callback method returns, no new children may be
 	registered below the device.  The method may also prepare the device or
-	driver in some way for the upcoming system power transition (for
-	example, by allocating additional memory required for this purpose), but
-	it should not put the device into a low-power state.
+	driver in some way for the upcoming system power transition, but it
+	should not put the device into a low-power state.
 
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 38b5724..316c2ba 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -22,12 +22,12 @@
 either wakes them up, if they are kernel threads, or sends fake signals to them,
 if they are user space processes.  A task that has TIF_FREEZE set, should react
 to it by calling the function called refrigerator() (defined in
-kernel/power/process.c), which sets the task's PF_FROZEN flag, changes its state
+kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
 to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
 Then, we say that the task is 'frozen' and therefore the set of functions
 handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c and include/linux/freezer.h).  User space
-processes are generally frozen before kernel threads.
+defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
+User space processes are generally frozen before kernel threads.
 
 It is not recommended to call refrigerator() directly.  Instead, it is
 recommended to use the try_to_freeze() function (defined in
@@ -95,7 +95,7 @@
 additional memory and we prevent them from doing that by freezing them earlier.
 [Of course, this also means that device drivers should not allocate substantial
 amounts of memory from their .suspend() callbacks before hibernation, but this
-is e separate issue.]
+is a separate issue.]
 
 3. The third reason is to prevent user space processes and some kernel threads
 from interfering with the suspending and resuming of devices.  A user space
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 0e85608..c2ae8bf 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -44,25 +44,33 @@
 };
 
 The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
-are executed by the PM core for either the power domain, or the device type
-(if the device power domain's struct dev_pm_ops does not exist), or the class
-(if the device power domain's and type's struct dev_pm_ops object does not
-exist), or the bus type (if the device power domain's, type's and class'
-struct dev_pm_ops objects do not exist) of the given device, so the priority
-order of callbacks from high to low is that power domain callbacks, device
-type callbacks, class callbacks and bus type callbacks, and the high priority
-one will take precedence over low priority one. The bus type, device type and
-class callbacks are referred to as subsystem-level callbacks in what follows,
-and generally speaking, the power domain callbacks are used for representing
-power domains within a SoC.
+are executed by the PM core for the device's subsystem that may be either of
+the following:
+
+  1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
+     is present.
+
+  2. Device type of the device, if both dev->type and dev->type->pm are present.
+
+  3. Device class of the device, if both dev->class and dev->class->pm are
+     present.
+
+  4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
+
+The PM core always checks which callback to use in the order given above, so the
+priority order of callbacks from high to low is: PM domain, device type, class
+and bus type.  Moreover, the high-priority one will always take precedence over
+a low-priority one.  The PM domain, bus type, device type and class callbacks
+are referred to as subsystem-level callbacks in what follows.
 
 By default, the callbacks are always invoked in process context with interrupts
 enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
-to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
-callbacks should be invoked in atomic context with interrupts disabled.
-This implies that these callback routines must not block or sleep, but it also
-means that the synchronous helper functions listed at the end of Section 4 can
-be used within an interrupt handler or in an atomic context.
+to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
+->runtime_idle() callbacks may be invoked in atomic context with interrupts
+disabled for a given device.  This implies that the callback routines in
+question must not block or sleep, but it also means that the synchronous helper
+functions listed at the end of Section 4 may be used for that device within an
+interrupt handler or generally in an atomic context.
 
 The subsystem-level suspend callback is _entirely_ _responsible_ for handling
 the suspend of the device as appropriate, which may, but need not include
@@ -789,6 +797,16 @@
 Similarly, if the power.use_autosuspend field isn't set then the autosuspend
 helper functions will behave just like the non-autosuspend counterparts.
 
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired.  If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend.  The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
 The implementation is well suited for asynchronous use in interrupt contexts.
 However such use inevitably involves races, because the PM core can't
 synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt
index 60a6f65..39ddcdb 100644
--- a/Documentation/serial/computone.txt
+++ b/Documentation/serial/computone.txt
@@ -20,8 +20,6 @@
 Date: 11/01/2001
 Historical Author: Andrew Manison <amanison@america.net>
 Primary Author: Doug McNash
-Support: support@computone.com
-Fixes and Updates: Mike Warfield <mhw@wittsend.com>
 
 This file assumes that you are using the Computone drivers which are
 integrated into the kernel sources.  For updating the drivers or installing
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index 079cb3d..41c8378 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 4f34432..edad99a 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -349,6 +349,7 @@
   ref		Reference board
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
+  dell-vostro-3500	Dell Vostro 3500 laptop
   hp		HP laptops with (inverted) mute-LED
   hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 03e2771..91fee3b 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -579,7 +579,7 @@
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:
 
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 
 The master branch or for-next branches can be used as the main
 development branches in general while the HD-audio specific patches
@@ -594,7 +594,7 @@
 install(-modules).  See INSTALL in the package.  The snapshot tarballs
 are found at:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
 
 
 Sending a Bug Report
@@ -696,7 +696,7 @@
 
 The hda-verb program is found in the ftp directory:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 Also a git repository is available:
 
@@ -764,7 +764,7 @@
 
 The package is found in:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 A git repository is available:
 
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
index 37a02ce..f0ffc27 100644
--- a/Documentation/usb/linux-cdc-acm.inf
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -90,10 +90,10 @@
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 
 ;------------------------------------------------------------------------------
diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.txt
new file mode 100644
index 0000000..ae1e900
--- /dev/null
+++ b/Documentation/watchdog/convert_drivers_to_kernel_api.txt
@@ -0,0 +1,195 @@
+Converting old watchdog drivers to the watchdog framework
+by Wolfram Sang <w.sang@pengutronix.de>
+=========================================================
+
+Before the watchdog framework came into the kernel, every driver had to
+implement the API on its own. Now, as the framework factored out the common
+components, those drivers can be lightened making it a user of the framework.
+This document shall guide you for this task. The necessary steps are described
+as well as things to look out for.
+
+
+Remove the file_operations struct
+---------------------------------
+
+Old drivers define their own file_operations for actions like open(), write(),
+etc... These are now handled by the framework and just call the driver when
+needed. So, in general, the 'file_operations' struct and assorted functions can
+go. Only very few driver-specific details have to be moved to other functions.
+Here is a overview of the functions and probably needed actions:
+
+- open: Everything dealing with resource management (file-open checks, magic
+  close preparations) can simply go. Device specific stuff needs to go to the
+  driver specific start-function. Note that for some drivers, the start-function
+  also serves as the ping-function. If that is the case and you need start/stop
+  to be balanced (clocks!), you are better off refactoring a separate start-function.
+
+- close: Same hints as for open apply.
+
+- write: Can simply go, all defined behaviour is taken care of by the framework,
+  i.e. ping on write and magic char ('V') handling.
+
+- ioctl: While the driver is allowed to have extensions to the IOCTL interface,
+  the most common ones are handled by the framework, supported by some assistance
+  from the driver:
+
+	WDIOC_GETSUPPORT:
+		Returns the mandatory watchdog_info struct from the driver
+
+	WDIOC_GETSTATUS:
+		Needs the status-callback defined, otherwise returns 0
+
+	WDIOC_GETBOOTSTATUS:
+		Needs the bootstatus member properly set. Make sure it is 0 if you
+		don't have further support!
+
+	WDIOC_SETOPTIONS:
+		No preparations needed
+
+	WDIOC_KEEPALIVE:
+		If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING
+		set
+
+	WDIOC_SETTIMEOUT:
+		Options in watchdog_info need to have WDIOF_SETTIMEOUT set
+		and a set_timeout-callback has to be defined. The core will also
+		do limit-checking, if min_timeout and max_timeout in the watchdog
+		device are set. All is optional.
+
+	WDIOC_GETTIMEOUT:
+		No preparations needed
+
+  Other IOCTLs can be served using the ioctl-callback. Note that this is mainly
+  intended for porting old drivers; new drivers should not invent private IOCTLs.
+  Private IOCTLs are processed first. When the callback returns with
+  -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error
+  is directly given to the user.
+
+Example conversion:
+
+-static const struct file_operations s3c2410wdt_fops = {
+-       .owner          = THIS_MODULE,
+-       .llseek         = no_llseek,
+-       .write          = s3c2410wdt_write,
+-       .unlocked_ioctl = s3c2410wdt_ioctl,
+-       .open           = s3c2410wdt_open,
+-       .release        = s3c2410wdt_release,
+-};
+
+Check the functions for device-specific stuff and keep it for later
+refactoring. The rest can go.
+
+
+Remove the miscdevice
+---------------------
+
+Since the file_operations are gone now, you can also remove the 'struct
+miscdevice'. The framework will create it on watchdog_dev_register() called by
+watchdog_register_device().
+
+-static struct miscdevice s3c2410wdt_miscdev = {
+-       .minor          = WATCHDOG_MINOR,
+-       .name           = "watchdog",
+-       .fops           = &s3c2410wdt_fops,
+-};
+
+
+Remove obsolete includes and defines
+------------------------------------
+
+Because of the simplifications, a few defines are probably unused now. Remove
+them. Includes can be removed, too. For example:
+
+- #include <linux/fs.h>
+- #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
+- #include <linux/uaccess.h> (if no custom IOCTLs are used)
+
+
+Add the watchdog operations
+---------------------------
+
+All possible callbacks are defined in 'struct watchdog_ops'. You can find it
+explained in 'watchdog-kernel-api.txt' in this directory. start(), stop() and
+owner must be set, the rest are optional. You will easily find corresponding
+functions in the old driver. Note that you will now get a pointer to the
+watchdog_device as a parameter to these functions, so you probably have to
+change the function header. Other changes are most likely not needed, because
+here simply happens the direct hardware access. If you have device-specific
+code left from the above steps, it should be refactored into these callbacks.
+
+Here is a simple example:
+
++static struct watchdog_ops s3c2410wdt_ops = {
++       .owner = THIS_MODULE,
++       .start = s3c2410wdt_start,
++       .stop = s3c2410wdt_stop,
++       .ping = s3c2410wdt_keepalive,
++       .set_timeout = s3c2410wdt_set_heartbeat,
++};
+
+A typical function-header change looks like:
+
+-static void s3c2410wdt_keepalive(void)
++static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+ {
+...
++
++       return 0;
+ }
+
+...
+
+-       s3c2410wdt_keepalive();
++       s3c2410wdt_keepalive(&s3c2410_wdd);
+
+
+Add the watchdog device
+-----------------------
+
+Now we need to create a 'struct watchdog_device' and populate it with the
+necessary information for the framework. The struct is also explained in detail
+in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory
+watchdog_info struct and the newly created watchdog_ops. Often, old drivers
+have their own record-keeping for things like bootstatus and timeout using
+static variables. Those have to be converted to use the members in
+watchdog_device. Note that the timeout values are unsigned int. Some drivers
+use signed int, so this has to be converted, too.
+
+Here is a simple example for a watchdog device:
+
++static struct watchdog_device s3c2410_wdd = {
++       .info = &s3c2410_wdt_ident,
++       .ops = &s3c2410wdt_ops,
++};
+
+
+Register the watchdog device
+----------------------------
+
+Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev).
+Make sure the return value gets checked and the error message, if present,
+still fits. Also convert the unregister case.
+
+-       ret = misc_register(&s3c2410wdt_miscdev);
++       ret = watchdog_register_device(&s3c2410_wdd);
+
+...
+
+-       misc_deregister(&s3c2410wdt_miscdev);
++       watchdog_unregister_device(&s3c2410_wdd);
+
+
+Update the Kconfig-entry
+------------------------
+
+The entry for the driver now needs to select WATCHDOG_CORE:
+
++       select WATCHDOG_CORE
+
+
+Create a patch and send it to upstream
+--------------------------------------
+
+Make sure you understood Documentation/SubmittingPatches and send your patch to
+linux-watchdog@vger.kernel.org. We are looking forward to it :)
+
diff --git a/Kbuild b/Kbuild
index 2114113..b8b708a 100644
--- a/Kbuild
+++ b/Kbuild
@@ -88,11 +88,13 @@
 # 3) Check for missing system calls
 #
 
-quiet_cmd_syscalls = CALL    $<
-      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
+always += missing-syscalls
+targets += missing-syscalls
 
-PHONY += missing-syscalls
-missing-syscalls: scripts/checksyscalls.sh FORCE
+quiet_cmd_syscalls = CALL    $<
+      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
+
+missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
 	$(call cmd,syscalls)
 
 # Keep these two files during make clean
diff --git a/MAINTAINERS b/MAINTAINERS
index 4cb8c51..4475602 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -789,6 +789,7 @@
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
+F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/
 
 ARM/FREESCALE IMX51
@@ -804,6 +805,13 @@
 T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/*imx6*
 
+ARM/FREESCALE MXS ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:	arch/arm/mach-mxs/
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1032,6 +1040,7 @@
 F:	arch/arm/include/asm/hardware/iomd.h
 F:	arch/arm/include/asm/hardware/memc.h
 F:	arch/arm/mach-rpc/
+F:	drivers/net/ethernet/8390/etherh.c
 F:	drivers/net/ethernet/i825xx/ether1*
 F:	drivers/net/ethernet/seeq/ether3*
 F:	drivers/scsi/arm/
@@ -1105,6 +1114,7 @@
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Kamil Debski <k.debski@samsung.com>
+M:     Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1716,6 +1726,7 @@
 F:	include/linux/can/core.h
 F:	include/linux/can/bcm.h
 F:	include/linux/can/raw.h
+F:	include/linux/can/gw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
@@ -1786,6 +1797,14 @@
 F:	net/wireless/*
 X:	net/wireless/wext*
 
+CHAR and MISC DRIVERS
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Greg Kroah-Hartman <greg@kroah.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S:	Maintained
+F:	drivers/char/*
+F:	drivers/misc/*
+
 CHECKPATCH
 M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
@@ -1924,9 +1943,11 @@
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <paul@paulmenage.org>
+M:	Tejun Heo <tj@kernel.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
+L:	cgroups@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
@@ -2340,6 +2361,13 @@
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
 
+DRM DRIVERS FOR EXYNOS
+M:	Inki Dae <inki.dae@samsung.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Supported
+F:	drivers/gpu/drm/exynos
+F:	include/drm/exynos*
+
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -2386,7 +2414,7 @@
 F:	net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
-M:	Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M:	Tyler Hicks <tyhicks@canonical.com>
 M:	Dustin Kirkland <kirkland@canonical.com>
 L:	ecryptfs@vger.kernel.org
 W:	https://launchpad.net/ecryptfs
@@ -2574,7 +2602,7 @@
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3018,6 +3046,13 @@
 F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
+HARDWARE SPINLOCK CORE
+M:	Ohad Ben-Cohen <ohad@wizery.com>
+S:	Maintained
+F:	Documentation/hwspinlock.txt
+F:	drivers/hwspinlock/hwspinlock_*
+F:	include/linux/hwspinlock.h
+
 HARMONY SOUND DRIVER
 M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
@@ -3701,7 +3736,7 @@
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/
@@ -4287,6 +4322,7 @@
 M:	Balbir Singh <bsingharora@gmail.com>
 M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
@@ -4320,7 +4356,7 @@
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/linux.git
+T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
 F:	Documentation/mips/
@@ -4453,7 +4489,7 @@
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -4469,11 +4505,9 @@
 F:	drivers/net/ethernet/neterion/
 
 NETFILTER/IPTABLES/IPCHAINS
-P:	Rusty Russell
-P:	Marc Boucher
-P:	James Morris
 P:	Harald Welte
 P:	Jozsef Kadlecsik
+M:	Pablo Neira Ayuso <pablo@netfilter.org>
 M:	Patrick McHardy <kaber@trash.net>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
@@ -4666,7 +4700,7 @@
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
 Q:	http://patchwork.kernel.org/project/linux-omap/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
 S:	Maintained
 F:	arch/arm/*omap*/
 
@@ -4714,6 +4748,13 @@
 F:	drivers/video/omap2/
 F:	Documentation/arm/OMAP/DSS
 
+OMAP HARDWARE SPINLOCK SUPPORT
+M:	Ohad Ben-Cohen <ohad@wizery.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/hwspinlock/omap_hwspinlock.c
+F:	arch/arm/mach-omap2/hwspinlock.c
+
 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org
@@ -4925,7 +4966,7 @@
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -5457,7 +5498,7 @@
 F:	drivers/net/ethernet/rdc/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-M:	Andy Grover <andy.grover@oracle.com>
+M:	Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
@@ -5634,7 +5675,6 @@
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassisinghbrar@gmail.com>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
@@ -5963,7 +6003,7 @@
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -6108,7 +6148,7 @@
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
@@ -7377,8 +7417,8 @@
 F:	arch/x86/kernel/cpu/mcheck/*
 
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
@@ -7411,7 +7451,8 @@
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Alex Elder <aelder@sgi.com>
+M:	Ben Myers <bpm@sgi.com>
+M:	Alex Elder <elder@kernel.org>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
diff --git a/Makefile b/Makefile
index 07bc925..12aafc2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 3
-PATCHLEVEL = 1
+PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION =
-NAME = "Divemaster Edition"
+EXTRAVERSION = -rc4
+NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -983,7 +983,6 @@
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
-	$(Q)$(MAKE) $(build)=. missing-syscalls
 
 # All the preparing..
 prepare: prepare0
@@ -1198,7 +1197,7 @@
 	@find $(srctree) $(RCS_FIND_IGNORE) \
 		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
 		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-		-o -name '.*.rej' -o -size 0 \
+		-o -name '.*.rej' \
 		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
 		-type f -print | xargs rm -f
 
@@ -1296,7 +1295,6 @@
 	@echo  '		2: warnings which occur quite often but may still be relevant'
 	@echo  '		3: more obscure warnings, can most likely be ignored'
 	@echo  '		Multiple levels can be combined with W=12 or W=123'
-	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 8bb9362..3d74801 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -445,11 +445,6 @@
 	  Is this a machine based on the EV67 core?  If in doubt, select N here
 	  and the machine will be treated as an EV6.
 
-config ALPHA_EV7
-	bool
-	depends on ALPHA_MARVEL
-	default y
-
 config ALPHA_MCPCIA
 	bool
 	depends on ALPHA_RAWHIDE
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index a872078..00096df 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -303,6 +303,7 @@
 #include <linux/vmalloc.h>
 #include <linux/agp_backend.h>
 #include <linux/agpgart.h>
+#include <linux/export.h>
 #include <asm/pgalloc.h>
 
 #define GET_PAGE_DIR_OFF(addr) (addr >> 22)
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index b899e95..53649c7 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/stat.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 022c2748..4361080 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -7,6 +7,7 @@
 #include <linux/pci.h>
 #include <linux/gfp.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/scatterlist.h>
 #include <linux/log2.h>
 #include <linux/dma-mapping.h>
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index cc0fd86..32de560 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -43,6 +43,7 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <linux/log2.h>
+#include <linux/export.h>
 
 extern struct atomic_notifier_head panic_notifier_list;
 static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe6b052..e084b7e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -595,6 +595,7 @@
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
+	select GENERIC_ALLOCATOR
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -769,6 +770,7 @@
 	select CPU_V6
 	select ARM_VIC
 	select HAVE_CLK
+	select HAVE_TCM
 	select CLKDEV_LOOKUP
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
@@ -777,9 +779,6 @@
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
 	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
@@ -838,8 +837,8 @@
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
-config ARCH_EXYNOS4
-	bool "Samsung EXYNOS4"
+config ARCH_EXYNOS
+	bool "SAMSUNG EXYNOS"
 	select CPU_V7
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -853,7 +852,7 @@
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select NEED_MACH_MEMORY_H
 	help
-	  Samsung EXYNOS4 series based systems
+	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
 config ARCH_SHARK
 	bool "Shark"
@@ -1080,7 +1079,7 @@
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
-source "arch/arm/mach-exynos4/Kconfig"
+source "arch/arm/mach-exynos/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
@@ -1232,7 +1231,7 @@
 	  capabilities of the processor.
 
 config PL310_ERRATA_588369
-	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0
 	help
 	   The PL310 L2 cache controller implements three types of Clean &
@@ -1257,7 +1256,7 @@
 	  entries regardless of the ASID.
 
 config PL310_ERRATA_727915
-	bool "Background Clean & Invalidate by Way operation can cause data corruption"
+	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
 	depends on CACHE_L2X0
 	help
 	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@@ -1290,8 +1289,8 @@
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config ARM_ERRATA_753970
-	bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+	bool "PL310 errata: cache sync operation may be faulty"
 	depends on CACHE_PL310
 	help
 	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -1353,6 +1352,18 @@
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -2212,7 +2223,7 @@
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b7c2d37..dfcf3b0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,7 +180,7 @@
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
+machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 176062a..5df26a9 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -65,6 +65,8 @@
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 9b29a62..3f9abd6b 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -22,11 +22,10 @@
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 
 	sdhci@c8000600 {
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		support-8bit;
 	};
 };
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 0e6ae47..410a546 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -526,7 +526,8 @@
 		sizeof(u32));
 	BUG_ON(!gic->saved_ppi_conf);
 
-	cpu_pm_register_notifier(&gic_notifier_block);
+	if (gic == &gic_data[0])
+		cpu_pm_register_notifier(&gic_notifier_block);
 }
 #else
 static void __init gic_pm_init(struct gic_chip_data *gic)
@@ -581,13 +582,16 @@
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
+	domain->hwirq_base = 32;
 	if (gic_nr == 0) {
 		gic_cpu_base_addr = cpu_base;
-		domain->hwirq_base = 16;
-		if (irq_start > 0)
-			irq_start = (irq_start & ~31) + 16;
-	} else
-		domain->hwirq_base = 32;
+
+		if ((irq_start & 31) > 0) {
+			domain->hwirq_base = 16;
+			if (irq_start != -1)
+				irq_start = (irq_start & ~31) + 16;
+		}
+	}
 
 	/*
 	 * Find out how many interrupts are supported.
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index a7934ba..b539ec8 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -25,6 +25,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include <asm/mach/pci.h>
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 7129cfb..f407a6b 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1211,8 +1211,8 @@
 	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
 	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
 
-	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
-	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
 
 	ccr |= (rqc->swap << CC_SWAP_SHFT);
 
@@ -1623,6 +1623,11 @@
 	return -1;
 }
 
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+	return pi->pcfg.irq_ns & (1 << i);
+}
+
 /* Upon success, returns IdentityToken for the
  * allocated channel, NULL otherwise.
  */
@@ -1647,7 +1652,8 @@
 
 	for (i = 0; i < chans; i++) {
 		thrd = &pl330->channels[i];
-		if (thrd->free) {
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pi, i))) {
 			thrd->ev = _alloc_event(thrd);
 			if (thrd->ev >= 0) {
 				thrd->free = false;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 1cde34a..0c616d5 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -16,6 +16,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <asm/hardware/scoop.h>
 
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9_defconfig
similarity index 93%
rename from arch/arm/configs/at91cap9adk_defconfig
rename to arch/arm/configs/at91cap9_defconfig
index ffb1edd..8826eb2 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9_defconfig
@@ -38,7 +38,6 @@
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -52,16 +51,12 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +76,6 @@
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -99,7 +93,6 @@
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index 38cb7c9..bbe4e1a 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -5,7 +5,6 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -56,7 +55,6 @@
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -75,18 +73,8 @@
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -108,8 +96,6 @@
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -119,14 +105,23 @@
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_PHYLIB=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -139,18 +134,6 @@
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@@ -158,9 +141,9 @@
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -290,7 +273,6 @@
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
@@ -335,7 +317,6 @@
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260_defconfig
similarity index 86%
rename from arch/arm/configs/at91sam9260ek_defconfig
rename to arch/arm/configs/at91sam9260_defconfig
index f8a9226..505b376 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -12,11 +12,23 @@
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
 CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
@@ -33,12 +45,10 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -55,7 +65,6 @@
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -71,7 +80,6 @@
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20_defconfig
similarity index 90%
rename from arch/arm/configs/at91sam9g20ek_defconfig
rename to arch/arm/configs/at91sam9g20_defconfig
index 9e90e6d..9123568 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -14,6 +14,15 @@
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
 CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
@@ -21,9 +30,10 @@
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,8 +47,6 @@
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -48,17 +56,13 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@@ -66,15 +70,14 @@
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
@@ -82,7 +85,6 @@
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -105,7 +107,6 @@
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index c5876d2..606d48f 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,6 +18,7 @@
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
@@ -73,11 +74,8 @@
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_AT76C50X_USB=m
@@ -131,7 +129,6 @@
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_FB_UDL=m
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rl_defconfig
similarity index 94%
rename from arch/arm/configs/at91sam9rlek_defconfig
rename to arch/arm/configs/at91sam9rl_defconfig
index 75621e4..ad562ee 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -23,8 +23,6 @@
 CONFIG_UNIX=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -35,7 +33,6 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -62,13 +59,11 @@
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index cd40bb5..bffe68e 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -4,19 +4,18 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS4=y
+CONFIG_ARCH_EXYNOS=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
 CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_SMDKV310=y
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
 CONFIG_MACH_ORIGEN=y
+CONFIG_MACH_SMDK4412=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -61,13 +60,9 @@
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
 CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 227a477..d95763d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -287,7 +287,7 @@
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 176ec22..fd996bb 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -263,7 +263,7 @@
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index a88e64d..443675d 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -132,7 +132,7 @@
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462..a7e7775 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,7 +48,6 @@
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
 CONFIG_OMAP_ARM_195MHZ=y
 CONFIG_OMAP_ARM_192MHZ=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4a5a126..374000e 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -14,8 +14,6 @@
 CONFIG_ARCH_U300=y
 CONFIG_MACH_U300=y
 CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
 CONFIG_MACH_U300_SPIDUMMY=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -26,19 +24,21 @@
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
@@ -51,6 +51,7 @@
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -65,10 +66,8 @@
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 97d31a4..2d7b6e7 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -10,7 +10,7 @@
 CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
@@ -24,6 +24,7 @@
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -41,11 +42,8 @@
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -72,15 +70,12 @@
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
 CONFIG_MMC=y
@@ -97,6 +92,7 @@
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 59577ad..547a3c1 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -140,7 +140,7 @@
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 1db1143..7df239b 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index e4a04e4..33c78d7 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -21,6 +21,9 @@
  * OneNAND features.
 */
 
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
@@ -138,3 +141,4 @@
 	u32	control1;
 };
 
+#endif /* ASM_PL080_H */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 7d19425..2b0efc3 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b8..0bda22c 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -55,16 +55,6 @@
 extern void
 release_pmu(enum arm_pmu_type type);
 
-/**
- * init_pmu() - Initialise the PMU.
- *
- * Initialise the system ready for PMU enabling. This should typically set the
- * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
- * the actual hardware initialisation.
- */
-extern int
-init_pmu(enum arm_pmu_type type);
-
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index a7e457e..58b8b84 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -25,7 +25,7 @@
 
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 #else
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index c60a294..4a11237 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 8e3c6f1..5b0bce6 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/cryptohash.h>
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index c0d9203..b530e91 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -5,7 +5,7 @@
  *
  *  Bits taken from various places.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9943e9e..463ff4a 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 1a33e9d..bee7f9d 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/bootmem.h>
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 9b05c6a..ddba41d 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/personality.h>
 #include <linux/binfmts.h>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9ad50c4..b145f16 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -497,7 +497,7 @@
 	.popsection
 	.pushsection __ex_table,"a"
 	.long	1b, 4b
-#if __LINUX_ARM_ARCH__ >= 7
+#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 1bec8b5..36d20bd 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -24,6 +24,7 @@
 #include <linux/miscdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <asm/hardware/coresight.h>
 #include <asm/sections.h>
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 566c54c..08c82fd 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -360,7 +360,7 @@
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index f447030..dcd5b4d 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 7cb2926..3efd82c 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -22,7 +22,6 @@
  *  Naturally it's not a 1:1 relation, but there are similarities.
  */
 #include <linux/kernel_stat.h>
-#include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 9fe8910..8a30c89 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -519,10 +519,12 @@
 static const union decode_item arm_cccc_0001_____1001_table[] = {
 	/* Synchronization primitives					*/
 
+#if __LINUX_ARM_ARCH__ < 6
+	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
 	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
 	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
 						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
+#endif
 	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
 	/* And unallocated instructions...				*/
 	DECODE_END
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index fc82de8..ba32b39 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -427,18 +427,25 @@
 
 	TEST_GROUP("Synchronization primitives")
 
-	/*
-	 * Use hard coded constants for SWP instructions to avoid warnings
-	 * about deprecated instructions.
-	 */
-	TEST_RP( ".word 0xe108e097 @ swp	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x610d0091 @ swpvs	r0, r",1,VAL1,", [sp]")
-	TEST_RP( ".word 0xe10cd09e @ swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swp	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
+	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#else
+	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
+	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
 	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
 	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
-	TEST_RP( ".word 0xe148e097 @ swpb	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x614d0091 @ swpvsb	r0, r",1,VAL1,", [sp]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
+#else
+	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
 
 	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
@@ -550,7 +557,7 @@
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
 	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strd	r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
 	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
 	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
 
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
index 5e726c3..5d8b857 100644
--- a/arch/arm/kernel/kprobes-test-thumb.c
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -222,8 +222,8 @@
 DONT_TEST_IN_ITBLOCK(
 	TEST_BF_R(  "cbnz	r",0,0, ", 2f")
 	TEST_BF_R(  "cbz	r",2,-1,", 2f")
-	TEST_BF_RX( "cbnz	r",4,1, ", 2f",0x20)
-	TEST_BF_RX( "cbz	r",7,0, ", 2f",0x40)
+	TEST_BF_RX( "cbnz	r",4,1, ", 2f", SPACE_0x20)
+	TEST_BF_RX( "cbz	r",7,0, ", 2f", SPACE_0x40)
 )
 	TEST_R("sxth	r0, r",7, HH1,"")
 	TEST_R("sxth	r7, r",0, HH2,"")
@@ -246,7 +246,7 @@
 	TESTCASE_START(code)		\
 	TEST_ARG_PTR(13, offset)	\
 	TEST_ARG_END("")		\
-	TEST_BRANCH_F(code,0)		\
+	TEST_BRANCH_F(code)		\
 	TESTCASE_END
 
 	TEST("push	{r0}")
@@ -319,8 +319,8 @@
 
 	TEST_BF(  "b	2f")
 	TEST_BB(  "b	2b")
-	TEST_BF_X("b	2f", 0x400)
-	TEST_BB_X("b	2b", 0x400)
+	TEST_BF_X("b	2f", SPACE_0x400)
+	TEST_BB_X("b	2b", SPACE_0x400)
 
 	TEST_GROUP("Testing instructions in IT blocks")
 
@@ -746,7 +746,7 @@
 	TEST_BB("bne.w	2b")
 	TEST_BF("bgt.w	2f")
 	TEST_BB("blt.w	2b")
-	TEST_BF_X("bpl.w	2f",0x1000)
+	TEST_BF_X("bpl.w	2f", SPACE_0x1000)
 )
 
 	TEST_UNSUPPORTED("msr	cpsr, r0")
@@ -786,11 +786,11 @@
 
 	TEST_BF(  "b.w	2f")
 	TEST_BB(  "b.w	2b")
-	TEST_BF_X("b.w	2f", 0x1000)
+	TEST_BF_X("b.w	2f", SPACE_0x1000)
 
 	TEST_BF(  "bl.w	2f")
 	TEST_BB(  "bl.w	2b")
-	TEST_BB_X("bl.w	2b", 0x1000)
+	TEST_BB_X("bl.w	2b", SPACE_0x1000)
 
 	TEST_X(	"blx	__dummy_arm_subroutine",
 		".arm				\n\t"
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
index 0dc5d77..e28a869 100644
--- a/arch/arm/kernel/kprobes-test.h
+++ b/arch/arm/kernel/kprobes-test.h
@@ -149,23 +149,31 @@
 	"1:	"instruction"				\n\t"	\
 	"	nop					\n\t"
 
-#define TEST_BRANCH_F(instruction, xtra_dist)			\
+#define TEST_BRANCH_F(instruction)				\
 	TEST_INSTRUCTION(instruction)				\
-	".if "#xtra_dist"				\n\t"	\
-	"	b	99f				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"
 
-#define TEST_BRANCH_B(instruction, xtra_dist)			\
+#define TEST_BRANCH_B(instruction)				\
 	"	b	50f				\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"	\
 	"	b	99f				\n\t"	\
-	".if "#xtra_dist"				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	TEST_INSTRUCTION(instruction)
+
+#define TEST_BRANCH_FX(instruction, codex)			\
+	TEST_INSTRUCTION(instruction)				\
+	"	b	99f				\n\t"	\
+	codex"						\n\t"	\
+	"	b	99f				\n\t"	\
+	"2:	nop					\n\t"
+
+#define TEST_BRANCH_BX(instruction, codex)			\
+	"	b	50f				\n\t"	\
+	"	b	99f				\n\t"	\
+	"2:	nop					\n\t"	\
+	"	b	99f				\n\t"	\
+	codex"						\n\t"	\
 	TEST_INSTRUCTION(instruction)
 
 #define TESTCASE_END						\
@@ -301,47 +309,60 @@
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg1 code2, 0)	\
+	TEST_BRANCH_F(code1 #reg1 code2)	\
 	TESTCASE_END
 
-#define TEST_BF_X(code, xtra_dist)		\
+#define TEST_BF(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code, xtra_dist)		\
+	TEST_BRANCH_F(code)			\
 	TESTCASE_END
 
-#define TEST_BB_X(code, xtra_dist)		\
+#define TEST_BB(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code, xtra_dist)		\
+	TEST_BRANCH_B(code)			\
 	TESTCASE_END
 
-#define TEST_BF_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_F(code1 #reg code2, xtra_dist)	\
+#define TEST_BF_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_F(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BB_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_B(code1 #reg code2, xtra_dist)	\
+#define TEST_BB_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_B(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BF(code)	TEST_BF_X(code, 0)
-#define TEST_BB(code)	TEST_BB_X(code, 0)
-
-#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
-#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
-
 #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
-	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)		\
+	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3)		\
+	TESTCASE_END
+
+#define TEST_BF_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_FX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BB_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_BX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, codex)	\
+	TESTCASE_START(code1 #reg code2)		\
+	TEST_ARG_REG(reg, val)				\
+	TEST_ARG_END("")				\
+	TEST_BRANCH_FX(code1 #reg code2, codex)		\
 	TESTCASE_END
 
 #define TEST_X(code, codex)			\
@@ -372,6 +393,25 @@
 	TESTCASE_END
 
 
+/*
+ * Macros for defining space directives spread over multiple lines.
+ * These are required so the compiler guesses better the length of inline asm
+ * code and will spill the literal pool early enough to avoid generating PC
+ * relative loads with out of range offsets.
+ */
+#define TWICE(x)	x x
+#define SPACE_0x8	TWICE(".space 4\n\t")
+#define SPACE_0x10	TWICE(SPACE_0x8)
+#define SPACE_0x20	TWICE(SPACE_0x10)
+#define SPACE_0x40	TWICE(SPACE_0x20)
+#define SPACE_0x80	TWICE(SPACE_0x40)
+#define SPACE_0x100	TWICE(SPACE_0x80)
+#define SPACE_0x200	TWICE(SPACE_0x100)
+#define SPACE_0x400	TWICE(SPACE_0x200)
+#define SPACE_0x800	TWICE(SPACE_0x400)
+#define SPACE_0x1000	TWICE(SPACE_0x800)
+
+
 /* Various values used in test cases... */
 #define N(val)	(val ^ 0xffffffff)
 #define VAL1	0x12345678
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 0f107dc..0bcd383 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -7,10 +7,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/syscore_ops.h>
+#include <linux/string.h>
 
 #include <asm/leds.h>
 
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index c1b4463..e59bbd4 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -32,24 +32,6 @@
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e6e5d7c..c475379 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -15,7 +15,7 @@
 #include <linux/bitmap.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/perf_event.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
@@ -343,8 +343,14 @@
 {
 	struct perf_event *sibling, *leader = event->group_leader;
 	struct pmu_hw_events fake_pmu;
+	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
 
-	memset(&fake_pmu, 0, sizeof(fake_pmu));
+	/*
+	 * Initialise the fake PMU. We only need to populate the
+	 * used_mask for the purposes of validation.
+	 */
+	memset(fake_used_mask, 0, sizeof(fake_used_mask));
+	fake_pmu.used_mask = fake_used_mask;
 
 	if (!validate_event(&fake_pmu, leader))
 		return -ENOSPC;
@@ -396,6 +402,9 @@
 	int i, err, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
+	if (!pmu_device)
+		return -ENODEV;
+
 	err = reserve_pmu(armpmu->type);
 	if (err) {
 		pr_warning("unable to reserve pmu\n");
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index a4b1b07..679cf4d 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index 2c3407e..2334bf8 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -33,3 +33,4 @@
 {
 	clear_bit_unlock(type, pmu_lock);
 }
+EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index fd08140..3d0c6fb 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -10,7 +10,7 @@
  */
 #include <stdarg.h>
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -192,6 +192,9 @@
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 2491f3b..483727a 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/elf.h>
 #include <linux/smp.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 0b13a72..8085417 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -8,7 +8,7 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/ftrace.h>
 
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bda0a21..3448a3f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
 #include <linux/ioport.h>
@@ -461,8 +461,10 @@
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 381d23a..00f79e5 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 62e7c61..d2b1779 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -12,7 +12,7 @@
  *  have a non-standard calling sequence on the Linux/arm
  *  platform.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 5a54b95..8c57dd3 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -11,7 +11,7 @@
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/time.h>
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 1040c00..8200dea 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -43,7 +43,7 @@
 
 struct cputopo_arm cpu_topology[NR_CPUS];
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_topology[cpu].core_sibling;
 }
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index d2cb0b3..e7e8365 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -39,7 +39,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index 1796157..e42adc6 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 10d868a..d6408d1 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,5 +1,9 @@
+#include <asm/unwind.h>
+
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -13,9 +17,13 @@
 	cmp	r0, #0
 	bne	1b
 	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -34,9 +42,13 @@
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #else
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r2, r0, #31
@@ -49,6 +61,8 @@
 	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
 /**
@@ -59,7 +73,9 @@
  * Note: we can trivially conditionalise the store instruction
  * to avoid dirtying the data cache.
  */
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r3, r0, #31
@@ -73,5 +89,7 @@
 	moveq	r0, #0
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #endif
diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S
index 68ed5b6..f402786 100644
--- a/arch/arm/lib/changebit.S
+++ b/arch/arm/lib/changebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_change_bit)
-	bitop	eor
-ENDPROC(_change_bit)
+bitop	_change_bit, eor
diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S
index 4c04c3b..f6b75fb 100644
--- a/arch/arm/lib/clearbit.S
+++ b/arch/arm/lib/clearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_clear_bit)
-	bitop	bic
-ENDPROC(_clear_bit)
+bitop	_clear_bit, bic
diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S
index bbee5c6..618feda 100644
--- a/arch/arm/lib/setbit.S
+++ b/arch/arm/lib/setbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
 		.text
 
-ENTRY(_set_bit)
-	bitop	orr
-ENDPROC(_set_bit)
+bitop	_set_bit, orr
diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S
index 15a4d43..4becdc3 100644
--- a/arch/arm/lib/testchangebit.S
+++ b/arch/arm/lib/testchangebit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit)
-	testop	eor, str
-ENDPROC(_test_and_change_bit)
+testop	_test_and_change_bit, eor, str
diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S
index 521b66b..918841d 100644
--- a/arch/arm/lib/testclearbit.S
+++ b/arch/arm/lib/testclearbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit)
-	testop	bicne, strne
-ENDPROC(_test_and_clear_bit)
+testop	_test_and_clear_bit, bicne, strne
diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S
index 1c98cc2..8d1b2fe 100644
--- a/arch/arm/lib/testsetbit.S
+++ b/arch/arm/lib/testsetbit.S
@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit)
-	testop	orreq, streq
-ENDPROC(_test_and_set_bit)
+testop	_test_and_set_bit, orreq, streq
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a6b7991..d111c3e9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -195,12 +195,6 @@
 
 comment "AT91SAM9260 Variants"
 
-config ARCH_AT91SAM9260_SAM9XE
-	bool "AT91SAM9XE"
-	help
-	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
-	  They are basically AT91SAM9260s with various sizes of embedded Flash.
-
 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index a4401d6..adad70d 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -98,7 +98,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -1021,8 +1021,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1035,7 +1035,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01d8bbd..66591fa 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -877,8 +877,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -891,7 +891,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 24b6f8c..25e3464 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -837,8 +837,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -851,7 +851,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3b70b389..ae78f4d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -816,8 +816,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -830,7 +830,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 3faa1fd..ad017eb 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1196,8 +1196,8 @@
 
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1210,7 +1210,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 000b5e1..09a16d6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -197,7 +197,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1346,7 +1346,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 305a851..628eb56 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -75,7 +75,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -908,8 +908,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -922,7 +922,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 0487ea1..4282d96 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -130,19 +130,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
-	return afeb9260_nand_partition;
-}
-
 static struct atmel_nand_data __initdata afeb9260_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
 	.bus_width_16	= 0,
+	.parts		= afeb9260_nand_partition,
+	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),
 };
 
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 747b2ea..f90cfb3 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -132,19 +132,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(cam60_nand_partition);
-	return cam60_nand_partition;
-}
-
 static struct atmel_nand_data __initdata cam60_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	// .det_pin	= ... not there
 	.rdy_pin	= AT91_PIN_PA9,
 	.enable_pin	= AT91_PIN_PA7,
-	.partition_info	= nand_partitions,
+	.parts		= cam60_nand_partition,
+	.num_parts	= ARRAY_SIZE(cam60_nand_partition),
 };
 
 static struct sam9_smc_config __initdata cam60_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 0626703..5dffd3b 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -169,19 +169,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
-	return cap9adk_nand_partitions;
-}
-
 static struct atmel_nand_data __initdata cap9adk_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
-	.partition_info	= nand_partitions,
+	.parts		= cap9adk_nand_partitions,
+	.num_parts	= ARRAY_SIZE(cap9adk_nand_partitions),
 };
 
 static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 15a3f1a..e61351f 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -97,19 +97,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
-	return kb9202_nand_partition;
-}
-
 static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	// .det_pin	= ... not there
 	.rdy_pin	= AT91_PIN_PC29,
 	.enable_pin	= AT91_PIN_PC28,
-	.partition_info	= nand_partitions,
+	.parts		= kb9202_nand_partition,
+	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };
 
 static void __init kb9202_board_init(void)
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 6094496..ef816c1 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -182,19 +182,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(neocore926_nand_partition);
-	return neocore926_nand_partition;
-}
-
 static struct atmel_nand_data __initdata neocore926_nand_data = {
 	.ale			= 21,
 	.cle			= 22,
 	.rdy_pin		= AT91_PIN_PB19,
 	.rdy_pin_active_low	= 1,
 	.enable_pin		= AT91_PIN_PD15,
-	.partition_info		= nand_partitions,
+	.parts			= neocore926_nand_partition,
+	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
 };
 
 static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 938cc39..07421bd 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -130,19 +130,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index b4ac30e..80a8c9c 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -138,19 +138,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(dk_nand_partition);
-	return dk_nand_partition;
-}
-
 static struct atmel_nand_data __initdata dk_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	.det_pin	= AT91_PIN_PB1,
 	.rdy_pin	= AT91_PIN_PC2,
 	// .enable_pin	= ... not there
-	.partition_info	= nand_partitions,
+	.parts		= dk_nand_partition,
+	.num_parts	= ARRAY_SIZE(dk_nand_partition),
 };
 
 #define DK_FLASH_BASE	AT91_CHIPSELECT_0
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 2a21e79..072d53a 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -131,19 +131,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 89c8b57..4f10181 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -173,19 +173,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 3741f43..b005b73 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -179,19 +179,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index a580dd4..bccdcf2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -180,19 +180,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8d77c2f..64fc75c 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -157,19 +157,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 /* det_pin is not connected */
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2d6203a..92de912 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -137,19 +137,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 /* det_pin is not connected */
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 39a28ef..b2b7482 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -88,19 +88,14 @@
 	},
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PD17,
 	.enable_pin	= AT91_PIN_PB6,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index c73d25e..0df01c6 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -97,18 +97,12 @@
 	},
 };
 
-static struct mtd_partition * __init
-snapper9260_nand_partition_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
-	return snapper9260_nand_partitions;
-}
-
 static struct atmel_nand_data __initdata snapper9260_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
-	.partition_info	= snapper9260_nand_partition_info,
+	.parts		= snapper9260_nand_partitions,
+	.num_parts	= ARRAY_SIZE(snapper9260_nand_partitions),
 	.bus_width_16	= 0,
 };
 
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 5852d3d..0a20bab 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -190,19 +190,14 @@
 	}
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
-	.partition_info	= nand_partitions,
+	.parts		= ek_nand_partition,
+	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
 
 static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 3c288b3..12a3f95 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -172,19 +172,14 @@
 	}
 };
 
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(yl9200_nand_partition);
-	return yl9200_nand_partition;
-}
-
 static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.ale		= 6,
 	.cle		= 7,
 	// .det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
 	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
-	.partition_info	= nand_partitions,
+	.parts		= yl9200_nand_partition,
+	.num_parts	= ARRAY_SIZE(yl9200_nand_partition),
 };
 
 /*
@@ -389,7 +384,7 @@
 #include <video/s1d13xxxfb.h>
 
 
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 1cfeac1..a851e6c9 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -19,6 +19,7 @@
 #include <linux/cpuidle.h>
 #include <asm/proc-fns.h>
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include "pm.h"
 
@@ -33,7 +34,8 @@
 
 /* Actual code that puts the SoC in different idle states */
 static int at91_enter_idle(struct cpuidle_device *dev,
-			       struct cpuidle_state *state)
+			struct cpuidle_driver *drv,
+			       int index)
 {
 	struct timeval before, after;
 	int idle_time;
@@ -41,10 +43,10 @@
 
 	local_irq_disable();
 	do_gettimeofday(&before);
-	if (state == &dev->states[0])
+	if (index == 0)
 		/* Wait for interrupt state */
 		cpu_do_idle();
-	else if (state == &dev->states[1]) {
+	else if (index == 1) {
 		asm("b 1f; .align 5; 1:");
 		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
 		saved_lpr = sdram_selfrefresh_enable();
@@ -55,34 +57,38 @@
 	local_irq_enable();
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
 			(after.tv_usec - before.tv_usec);
-	return idle_time;
+
+	dev->last_residency = idle_time;
+	return index;
 }
 
 /* Initialize CPU idle by registering the idle states */
 static int at91_init_cpuidle(void)
 {
 	struct cpuidle_device *device;
-
-	cpuidle_register_driver(&at91_idle_driver);
+	struct cpuidle_driver *driver = &at91_idle_driver;
 
 	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
 	device->state_count = AT91_MAX_STATES;
+	driver->state_count = AT91_MAX_STATES;
 
 	/* Wait for interrupt state */
-	device->states[0].enter = at91_enter_idle;
-	device->states[0].exit_latency = 1;
-	device->states[0].target_residency = 10000;
-	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[0].name, "WFI");
-	strcpy(device->states[0].desc, "Wait for interrupt");
+	driver->states[0].enter = at91_enter_idle;
+	driver->states[0].exit_latency = 1;
+	driver->states[0].target_residency = 10000;
+	driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[0].name, "WFI");
+	strcpy(driver->states[0].desc, "Wait for interrupt");
 
 	/* Wait for interrupt and RAM self refresh state */
-	device->states[1].enter = at91_enter_idle;
-	device->states[1].exit_latency = 10;
-	device->states[1].target_residency = 10000;
-	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[1].name, "RAM_SR");
-	strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+	driver->states[1].enter = at91_enter_idle;
+	driver->states[1].exit_latency = 10;
+	driver->states[1].target_residency = 10000;
+	driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[1].name, "RAM_SR");
+	strcpy(driver->states[1].desc, "WFI and RAM Self Refresh");
+
+	cpuidle_register_driver(&at91_idle_driver);
 
 	if (cpuidle_register_device(device)) {
 		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index d07767f..eac92e9 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -117,7 +117,8 @@
 	u8		ale;		/* address line number connected to ALE */
 	u8		cle;		/* address line number connected to CLE */
 	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
+	struct mtd_partition *parts;
+	unsigned int	num_parts;
 };
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
index 8eb459f..8e4a1bd 100644
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
+#include <mach/hardware.h>
+
 #define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 43eadbcc..430da12 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -235,7 +235,7 @@
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 0ca0005..f4d4d6d 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -26,6 +26,7 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/irqreturn.h>
 #include <linux/proc_fs.h>
 #include <linux/slab.h>
@@ -35,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 8616876..1adec78e 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -14,6 +14,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <asm/page.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 26d94c0..11c3db9 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -377,7 +377,7 @@
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
 	.ecc_mode	= NAND_ECC_HW,
 	.ecc_bits	= 4,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,
 	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
 	.timing         = &da830_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index ec21663..1d7d249 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -256,7 +256,7 @@
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
 	.ecc_bits	= 4,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &da850_evm_nandflash_timing,
 };
 
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 6556628..4e0e707 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -77,7 +77,7 @@
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
 
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b307470..ff2d241 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -74,7 +74,7 @@
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW_SYNDROME,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 };
 
 static struct resource davinci_nand_resources[] = {
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 04c43ab..1918ae7 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -139,7 +139,7 @@
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
-	.options		= NAND_USE_FLASH_BBT,
+	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a005e769..0cf8abf 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -23,6 +23,7 @@
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
+#include <linux/export.h>
 
 #include <media/tvp514x.h>
 
@@ -150,7 +151,7 @@
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,
 };
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 337c45e..e574d7f8 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -31,6 +31,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
+#include <linux/export.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 6efc84cc..3cfff55 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -396,7 +396,8 @@
 	.parts		= mityomapl138_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+	.bbt_options	= NAND_BBT_USE_FLASH,
+	.options	= NAND_BUSWIDTH_16,
 	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
 };
 
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 38d6f64..e5f231a 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -87,7 +87,7 @@
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 };
 
 static struct resource davinci_ntosd2_nandflash_resource[] = {
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 90ee7b5..f69e40a 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -144,7 +144,7 @@
 	.parts		= nand_partitions,
 	.nr_parts	= ARRAY_SIZE(nand_partitions),
 	.ecc_mode	= NAND_ECC_HW,
-	.options	= NAND_USE_FLASH_BBT,
+	.bbt_options	= NAND_BBT_USE_FLASH,
 	.ecc_bits	= 1,
 };
 
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
index ba8b12b..f2232ca 100644
--- a/arch/arm/mach-davinci/cdce949.c
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 
 #include <mach/clock.h>
 #include <mach/cdce949.h>
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 41669ec..5bba707 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <mach/cpufreq.h>
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 0b314bf..a30c7c5 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
 #include <asm/proc-fns.h>
 
 #include <mach/cpuidle.h>
@@ -78,9 +79,11 @@
 
 /* Actual code that puts the SoC in different idle states */
 static int davinci_enter_idle(struct cpuidle_device *dev,
-						struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+						int index)
 {
-	struct davinci_ops *ops = cpuidle_get_statedata(state);
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
 	struct timeval before, after;
 	int idle_time;
 
@@ -98,13 +101,17 @@
 	local_irq_enable();
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
 			(after.tv_usec - before.tv_usec);
-	return idle_time;
+
+	dev->last_residency = idle_time;
+
+	return index;
 }
 
 static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct cpuidle_device *device;
+	struct cpuidle_driver *driver = &davinci_idle_driver;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
 
 	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
@@ -116,33 +123,34 @@
 
 	ddr2_reg_base = pdata->ddr2_ctlr_base;
 
+	/* Wait for interrupt state */
+	driver->states[0].enter = davinci_enter_idle;
+	driver->states[0].exit_latency = 1;
+	driver->states[0].target_residency = 10000;
+	driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[0].name, "WFI");
+	strcpy(driver->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	driver->states[1].enter = davinci_enter_idle;
+	driver->states[1].exit_latency = 10;
+	driver->states[1].target_residency = 10000;
+	driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[1].name, "DDR SR");
+	strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
+	if (pdata->ddr2_pdown)
+		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
+	cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
+
+	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+	driver->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
 	ret = cpuidle_register_driver(&davinci_idle_driver);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register driver\n");
 		return ret;
 	}
 
-	/* Wait for interrupt state */
-	device->states[0].enter = davinci_enter_idle;
-	device->states[0].exit_latency = 1;
-	device->states[0].target_residency = 10000;
-	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[0].name, "WFI");
-	strcpy(device->states[0].desc, "Wait for interrupt");
-
-	/* Wait for interrupt and DDR self refresh state */
-	device->states[1].enter = davinci_enter_idle;
-	device->states[1].exit_latency = 10;
-	device->states[1].target_residency = 10000;
-	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[1].name, "DDR SR");
-	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
-	if (pdata->ddr2_pdown)
-		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
-	cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
-
-	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
-
 	ret = cpuidle_register_device(device);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register device\n");
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbaae4772..960e9de 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,6 +15,8 @@
 
 #include <asm-generic/gpio.h>
 
+#define __ARM_GPIOLIB_COMPLEX
+
 /* The inline versions use the static inlines in the driver header */
 #include "gpio-davinci.h"
 
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index 0251510..1cf555a 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -74,8 +74,10 @@
 	nand_ecc_modes_t	ecc_mode;
 	u8			ecc_bits;
 
-	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
+	/* e.g. NAND_BUSWIDTH_16 */
 	unsigned		options;
+	/* e.g. NAND_BBT_USE_FLASH */
+	unsigned		bbt_options;
 
 	/* Main and mirror bbt descriptor overrides */
 	struct nand_bbt_descr	*bbt_td;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 94c78bc..2432a6b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -33,6 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 1ade3c3..8b2f143 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -116,8 +116,9 @@
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	}, {
 		.name		= "Linux",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0,			/* filled in later */
+		.offset		= MTDPART_OFS_RETAIN,
+		.size		= TS72XX_REDBOOT_PART_SIZE,
+				/* leave so much for last partition */
 	}, {
 		.name		= "RedBoot",
 		.offset		= MTDPART_OFS_APPEND,
@@ -126,28 +127,14 @@
 	},
 };
 
-static void ts72xx_nand_set_parts(uint64_t size,
-				  struct platform_nand_chip *chip)
-{
-	/* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
-	if (size == SZ_32M || size == SZ_128M) {
-		/* Set the "Linux" partition size */
-		ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
-
-		chip->partitions = ts72xx_nand_parts;
-		chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
-	} else {
-		pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
-	}
-}
-
 static struct platform_nand_data ts72xx_nand_data = {
 	.chip = {
 		.nr_chips	= 1,
 		.chip_offset	= 0,
 		.chip_delay	= 15,
 		.part_probe_types = ts72xx_nand_part_probes,
-		.set_parts	= ts72xx_nand_set_parts,
+		.partitions	= ts72xx_nand_parts,
+		.nr_partitions	= ARRAY_SIZE(ts72xx_nand_parts),
 	},
 	.ctrl = {
 		.cmd_ctrl	= ts72xx_nand_hwcontrol,
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos/Kconfig
similarity index 75%
rename from arch/arm/mach-exynos4/Kconfig
rename to arch/arm/mach-exynos/Kconfig
index a652735..724ec0f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Kconfig
+# arch/arm/mach-exynos/Kconfig
 #
 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 #		http://www.samsung.com/
@@ -7,22 +7,47 @@
 
 # Configuration options for the EXYNOS4
 
-if ARCH_EXYNOS4
+if ARCH_EXYNOS
+
+menu "SAMSUNG EXYNOS SoCs Support"
+
+choice
+	prompt "EXYNOS System Type"
+	default ARCH_EXYNOS4
+
+config ARCH_EXYNOS4
+	bool "SAMSUNG EXYNOS4"
+	help
+	  Samsung EXYNOS4 SoCs based systems
+
+endchoice
+
+comment "EXYNOS SoCs"
 
 config CPU_EXYNOS4210
-	bool
-	select S3C_PL330_DMA
+	bool "SAMSUNG EXYNOS4210"
+	default y
+	depends on ARCH_EXYNOS4
+	select SAMSUNG_DMADEV
 	select ARM_CPU_SUSPEND if PM
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
-	bool
+	bool "SAMSUNG EXYNOS4212"
+	default y
+	depends on ARCH_EXYNOS4
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4212 SoC support
 
 config SOC_EXYNOS4412
-	bool
+	bool "SAMSUNG EXYNOS4412"
+	default y
+	depends on ARCH_EXYNOS4
 	help
 	  Enable EXYNOS4412 SoC support
 
@@ -120,7 +145,7 @@
 
 # machine support
 
-menu "EXYNOS4 Machines"
+if ARCH_EXYNOS4
 
 comment "EXYNOS4210 Boards"
 
@@ -137,6 +162,14 @@
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -151,6 +184,7 @@
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
@@ -176,19 +210,26 @@
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_FIMC
+	select S5P_SETUP_MIPIPHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -196,21 +237,33 @@
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
+	select S5P_GPIO_INT
 	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S5P_SETUP_MIPIPHY
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
 	help
@@ -221,8 +274,23 @@
 	select CPU_EXYNOS4210
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
@@ -257,12 +325,11 @@
 	select MACH_SMDK4212
 	help
 	  Machine support for Samsung SMDK4412
+endif
 
-endmenu
+if ARCH_EXYNOS4
 
-comment "Configuration for HSMMC bus width"
-
-menu "Use 8-bit bus width"
+comment "Configuration for HSMMC 8-bit bus width"
 
 config EXYNOS4_SDHCI_CH0_8BIT
 	bool "Channel 0 with 8-bit bus"
@@ -275,6 +342,7 @@
 	help
 	  Support HSMMC Channel 2 8-bit bus.
 	  If selected, Channel 3 is disabled.
+endif
 
 endmenu
 
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos/Makefile
similarity index 88%
rename from arch/arm/mach-exynos4/Makefile
rename to arch/arm/mach-exynos/Makefile
index c9b2e1f..59069a3 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -1,4 +1,4 @@
-# arch/arm/mach-exynos4/Makefile
+# arch/arm/mach-exynos/Makefile
 #
 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 #		http://www.samsung.com/
@@ -12,11 +12,11 @@
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
@@ -39,11 +39,11 @@
 
 # device support
 
-obj-y					+= dev-audio.o
+obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI)	+= dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
@@ -57,5 +57,4 @@
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
similarity index 100%
rename from arch/arm/mach-exynos4/Makefile.boot
rename to arch/arm/mach-exynos/Makefile.boot
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
similarity index 100%
rename from arch/arm/mach-exynos4/clock-exynos4210.c
rename to arch/arm/mach-exynos/clock-exynos4210.c
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
similarity index 100%
rename from arch/arm/mach-exynos4/clock-exynos4212.c
rename to arch/arm/mach-exynos/clock-exynos4212.c
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos/clock.c
similarity index 86%
rename from arch/arm/mach-exynos4/clock.c
rename to arch/arm/mach-exynos/clock.c
index 0d59be3..2894f0a 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -111,6 +111,11 @@
 	.name		= "sclk_usbphy1",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -146,6 +151,11 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
 }
 
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
 static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -186,6 +196,16 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -503,13 +523,43 @@
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
@@ -630,6 +680,12 @@
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_aclk_100.clk,
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 14),
+	}, {
 		.name		= "SYSMMU_MDMA",
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 5),
@@ -831,6 +887,81 @@
 	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
 };
 
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_sclk_dac,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.parent = &clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_sclk_hdmi,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -1157,6 +1288,71 @@
 	.get_rate = exynos4_fout_apll_get_rate,
 };
 
+static u32 vpll_div[][8] = {
+	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
+	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con0, vpll_con1 = 0;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+	vpll_con0 &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
+			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
+			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+			vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+			vpll_con0 |= vpll_div[i][7] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con0, S5P_VPLL_CON0);
+	__raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+	.get_rate = exynos4_vpll_get_rate,
+	.set_rate = exynos4_vpll_set_rate,
+};
+
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1214,6 +1410,7 @@
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &exynos4_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1241,7 +1438,10 @@
 }
 
 static struct clk *clks[] __initdata = {
-	/* Nothing here yet */
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
 };
 
 #ifdef CONFIG_PM_SLEEP
@@ -1275,6 +1475,9 @@
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
@@ -1282,5 +1485,7 @@
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	register_syscore_ops(&exynos4_clock_syscore_ops);
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos/cpu.c
similarity index 90%
rename from arch/arm/mach-exynos4/cpu.c
rename to arch/arm/mach-exynos/cpu.c
index a348434..90ec247 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/cpu.c
+/* linux/arch/arm/mach-exynos/cpu.c
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -28,6 +28,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
@@ -39,28 +40,47 @@
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
 
 /* Initial IO mappings */
-static struct map_desc exynos4_iodesc[] __initdata = {
+static struct map_desc exynos_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
 		.length		= SZ_4K,
-		.type	 	= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
+		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
 		.length		= SZ_8K,
@@ -91,11 +111,6 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
 		.length		= SZ_4K,
@@ -105,16 +120,6 @@
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -136,7 +141,7 @@
 	},
 };
 
-static void exynos4_idle(void)
+static void exynos_idle(void)
 {
 	if (!need_resched())
 		cpu_do_idle();
@@ -150,12 +155,13 @@
 }
 
 /*
- * exynos4_map_io
+ * exynos_map_io
  *
  * register the standard cpu IO areas
  */
 void __init exynos4_map_io(void)
 {
+	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
@@ -182,6 +188,7 @@
 	s3c_i2c2_setname("s3c2440-i2c");
 
 	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
 }
 
 void __init exynos4_init_clocks(int xtal)
@@ -248,7 +255,6 @@
 {
 	return sysdev_class_register(&exynos4_sysclass);
 }
-
 core_initcall(exynos4_core_init);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -277,15 +283,16 @@
 early_initcall(exynos4_l2x0_cache_init);
 #endif
 
-int __init exynos4_init(void)
+int __init exynos_init(void)
 {
-	printk(KERN_INFO "EXYNOS4: Initializing architecture\n");
+	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
 
 	/* set idle function */
-	pm_idle = exynos4_idle;
+	pm_idle = exynos_idle;
 
 	/* set sw_reset function */
-	s5p_reset_hook = exynos4_sw_reset;
+	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+		s5p_reset_hook = exynos4_sw_reset;
 
 	return sysdev_register(&exynos4_sysdev);
 }
diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
similarity index 74%
rename from arch/arm/mach-exynos4/cpuidle.c
rename to arch/arm/mach-exynos/cpuidle.c
index bf7e96f..4ebb382 100644
--- a/arch/arm/mach-exynos4/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -12,11 +12,14 @@
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 
 static int exynos4_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_state *state);
+			struct cpuidle_driver *drv,
+			      int index);
 
 static struct cpuidle_state exynos4_cpuidle_set[] = {
 	[0] = {
@@ -37,7 +40,8 @@
 };
 
 static int exynos4_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+			      int index)
 {
 	struct timeval before, after;
 	int idle_time;
@@ -52,29 +56,31 @@
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
 		    (after.tv_usec - before.tv_usec);
 
-	return idle_time;
+	dev->last_residency = idle_time;
+	return index;
 }
 
 static int __init exynos4_init_cpuidle(void)
 {
 	int i, max_cpuidle_state, cpu_id;
 	struct cpuidle_device *device;
+	struct cpuidle_driver *drv = &exynos4_idle_driver;
 
+	/* Setup cpuidle driver */
+	drv->state_count = (sizeof(exynos4_cpuidle_set) /
+				       sizeof(struct cpuidle_state));
+	max_cpuidle_state = drv->state_count;
+	for (i = 0; i < max_cpuidle_state; i++) {
+		memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
+				sizeof(struct cpuidle_state));
+	}
 	cpuidle_register_driver(&exynos4_idle_driver);
 
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
 		device->cpu = cpu_id;
 
-		device->state_count = (sizeof(exynos4_cpuidle_set) /
-					       sizeof(struct cpuidle_state));
-
-		max_cpuidle_state = device->state_count;
-
-		for (i = 0; i < max_cpuidle_state; i++) {
-			memcpy(&device->states[i], &exynos4_cpuidle_set[i],
-					sizeof(struct cpuidle_state));
-		}
+		device->state_count = drv->state_count;
 
 		if (cpuidle_register_device(device)) {
 			printk(KERN_ERR "CPUidle register device failed\n,");
diff --git a/arch/arm/mach-exynos4/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-ahci.c
rename to arch/arm/mach-exynos/dev-ahci.c
diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-audio.c
rename to arch/arm/mach-exynos/dev-audio.c
diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-dwmci.c
rename to arch/arm/mach-exynos/dev-dwmci.c
diff --git a/arch/arm/mach-exynos4/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c
similarity index 100%
rename from arch/arm/mach-exynos4/dev-pd.c
rename to arch/arm/mach-exynos/dev-pd.c
diff --git a/arch/arm/mach-exynos4/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c
similarity index 99%
rename from arch/arm/mach-exynos4/dev-sysmmu.c
rename to arch/arm/mach-exynos/dev-sysmmu.c
index 3b7cae0..781563f 100644
--- a/arch/arm/mach-exynos4/dev-sysmmu.c
+++ b/arch/arm/mach-exynos/dev-sysmmu.c
@@ -12,6 +12,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
new file mode 100644
index 0000000..9667c61
--- /dev/null
+++ b/arch/arm/mach-exynos/dma.c
@@ -0,0 +1,250 @@
+/* linux/arch/arm/mach-exynos4/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	},
+};
+
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
+};
+
+struct amba_device exynos4_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &exynos4_pdma0_pdata,
+	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA0,
+		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[25] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_TX,
+		.rqtype = MEMTODEV,
+	},
+};
+
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
+};
+
+struct amba_device exynos4_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &exynos4_pdma1_pdata,
+	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA1,
+		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+static int __init exynos4_dma_init(void)
+{
+	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(exynos4_dma_init);
diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos/headsmp.S
similarity index 100%
rename from arch/arm/mach-exynos4/headsmp.S
rename to arch/arm/mach-exynos/headsmp.S
diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos/hotplug.c
similarity index 100%
rename from arch/arm/mach-exynos4/hotplug.c
rename to arch/arm/mach-exynos/hotplug.c
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/debug-macro.S
rename to arch/arm/mach-exynos/include/mach/debug-macro.S
diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos/include/mach/dma.h
similarity index 89%
rename from arch/arm/mach-exynos4/include/mach/dma.h
rename to arch/arm/mach-exynos/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-exynos4/include/mach/dma.h
+++ b/arch/arm/mach-exynos/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos/include/mach/dwmci.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/dwmci.h
rename to arch/arm/mach-exynos/include/mach/dwmci.h
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/entry-macro.S
rename to arch/arm/mach-exynos/include/mach/entry-macro.S
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/exynos4-clock.h
rename to arch/arm/mach-exynos/include/mach/exynos4-clock.h
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/gpio.h
rename to arch/arm/mach-exynos/include/mach/gpio.h
diff --git a/arch/arm/mach-exynos4/include/mach/hardware.h b/arch/arm/mach-exynos/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/hardware.h
rename to arch/arm/mach-exynos/include/mach/hardware.h
diff --git a/arch/arm/mach-exynos4/include/mach/io.h b/arch/arm/mach-exynos/include/mach/io.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/io.h
rename to arch/arm/mach-exynos/include/mach/io.h
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
similarity index 97%
rename from arch/arm/mach-exynos4/include/mach/irqs.h
rename to arch/arm/mach-exynos/include/mach/irqs.h
index 2d3f6bc..dfd4b7e 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -95,7 +95,11 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_MIXER		IRQ_SPI(91)
+#define IRQ_HDMI		IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
 #define IRQ_MFC			IRQ_SPI(94)
+#define IRQ_SDO			IRQ_SPI(95)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
 #define IRQ_I2S0		IRQ_SPI(97)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
similarity index 87%
rename from arch/arm/mach-exynos4/include/mach/map.h
rename to arch/arm/mach-exynos/include/mach/map.h
index 9f97eb8..058541d 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/map.h
+/* linux/arch/arm/mach-exynos/include/mach/map.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -112,6 +112,12 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_VP			0x12C00000
+#define EXYNOS4_PA_MIXER		0x12C10000
+#define EXYNOS4_PA_SDO			0x12C20000
+#define EXYNOS4_PA_HDMI			0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
+
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
@@ -139,33 +145,45 @@
 #define S3C_PA_IIC5			EXYNOS4_PA_IIC(5)
 #define S3C_PA_IIC6			EXYNOS4_PA_IIC(6)
 #define S3C_PA_IIC7			EXYNOS4_PA_IIC(7)
-#define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
-#define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
+#define S3C_PA_UART			EXYNOS4_PA_UART
 
 #define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
+#define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
 #define S5P_PA_FIMC2			EXYNOS4_PA_FIMC2
 #define S5P_PA_FIMC3			EXYNOS4_PA_FIMC3
+#define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
+#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
+#define S5P_PA_MFC			EXYNOS4_PA_MFC
 #define S5P_PA_MIPI_CSIS0		EXYNOS4_PA_MIPI_CSIS0
 #define S5P_PA_MIPI_CSIS1		EXYNOS4_PA_MIPI_CSIS1
-#define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
+#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
 #define S5P_PA_ONENAND			EXYNOS4_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
+#define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
 #define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_MFC			EXYNOS4_PA_MFC
 #define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
-#define S5P_PA_EHCI			EXYNOS4_PA_EHCI
+#define S5P_PA_VP			EXYNOS4_PA_VP
 
+#define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-/* UART */
+#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
+#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
+#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
+#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
+#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
 
-#define S3C_PA_UART			EXYNOS4_PA_UART
+/* Compatibility UART */
+
+#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
diff --git a/arch/arm/mach-exynos4/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/memory.h
rename to arch/arm/mach-exynos/include/mach/memory.h
diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
similarity index 89%
rename from arch/arm/mach-exynos4/include/mach/pm-core.h
rename to arch/arm/mach-exynos/include/mach/pm-core.h
index 1df3b81..9d8da51e3 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -14,6 +14,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
 #include <mach/regs-pmu.h>
 
 static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@
 	/* nothing here yet */
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
+
+#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
similarity index 84%
rename from arch/arm/mach-exynos4/include/mach/pmu.h
rename to arch/arm/mach-exynos/include/mach/pmu.h
index a952904..632dd56 100644
--- a/arch/arm/mach-exynos4/include/mach/pmu.h
+++ b/arch/arm/mach-exynos/include/mach/pmu.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PMU_H
 #define __ASM_ARCH_PMU_H __FILE__
 
+#define PMU_TABLE_END	NULL
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,6 +22,11 @@
 	NUM_SYS_POWERDOWN,
 };
 
+struct exynos4_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
 
 #endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-audss.h
rename to arch/arm/mach-exynos/include/mach/regs-audss.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-clock.h
rename to arch/arm/mach-exynos/include/mach/regs-clock.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-gpio.h
rename to arch/arm/mach-exynos/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-irq.h
rename to arch/arm/mach-exynos/include/mach/regs-irq.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-mct.h
rename to arch/arm/mach-exynos/include/mach/regs-mct.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mem.h b/arch/arm/mach-exynos/include/mach/regs-mem.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-mem.h
rename to arch/arm/mach-exynos/include/mach/regs-mem.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
similarity index 69%
rename from arch/arm/mach-exynos4/include/mach/regs-pmu.h
rename to arch/arm/mach-exynos/include/mach/regs-pmu.h
index cdf9b47..4fff8e9 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -25,9 +25,10 @@
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
@@ -35,15 +36,17 @@
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
-#define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE			(1 << 0)
+#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE			(1 << 0)
+
+#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE			(1 << 0)
 
 #define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
 #define S5P_MIPI_DPHY_ENABLE			(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
 #define S5P_MIPI_DPHY_MRESETN			(1 << 2)
 
-#define S5P_PMU_SATA_PHY_CONTROL		S5P_PMUREG(0x0720)
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
 #define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
 #define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
 #define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR		S5P_PMUREG(0x1154)
 #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
 #define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
 #define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
 #define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
 #define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
 #define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR		S5P_PMUREG(0x1174)
 #define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
 #define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
 #define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
 #define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
 #define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
 #define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR			S5P_PMUREG(0x11C4)
 #define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
 #define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
 #define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
 #define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
 #define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR			S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR			S5P_PMUREG(0x11E4)
 #define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
 #define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
 #define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
 #define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
 #define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
 #define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR				S5P_PMUREG(0x1394)
 #define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
 #define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
 #define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
 #define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF			S5P_PMUREG(0x3CA0)
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
@@ -165,4 +161,60 @@
 
 #define S5P_CHECK_SLEEP				0x00000BAD
 
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
rename to arch/arm/mach-exynos/include/mach/regs-sysmmu.h
diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
rename to arch/arm/mach-exynos/include/mach/regs-usb-phy.h
diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/sysmmu.h
rename to arch/arm/mach-exynos/include/mach/sysmmu.h
diff --git a/arch/arm/mach-exynos4/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/system.h
rename to arch/arm/mach-exynos/include/mach/system.h
diff --git a/arch/arm/mach-exynos4/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/timex.h
rename to arch/arm/mach-exynos/include/mach/timex.h
diff --git a/arch/arm/mach-exynos4/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/uncompress.h
rename to arch/arm/mach-exynos/include/mach/uncompress.h
diff --git a/arch/arm/mach-exynos4/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
similarity index 100%
rename from arch/arm/mach-exynos4/include/mach/vmalloc.h
rename to arch/arm/mach-exynos/include/mach/vmalloc.h
diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos/init.c
similarity index 100%
rename from arch/arm/mach-exynos4/init.c
rename to arch/arm/mach-exynos/init.c
diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
similarity index 100%
rename from arch/arm/mach-exynos4/irq-combiner.c
rename to arch/arm/mach-exynos/irq-combiner.c
diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
similarity index 100%
rename from arch/arm/mach-exynos4/irq-eint.c
rename to arch/arm/mach-exynos/irq-eint.c
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
similarity index 100%
rename from arch/arm/mach-exynos4/mach-armlex4210.c
rename to arch/arm/mach-exynos/mach-armlex4210.c
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
similarity index 85%
rename from arch/arm/mach-exynos4/mach-nuri.c
rename to arch/arm/mach-exynos/mach-nuri.c
index 6e05368..236bbe1 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -27,15 +27,20 @@
 #include <linux/pwm_backlight.h>
 
 #include <video/platform_lcd.h>
+#include <media/m5mols.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
@@ -43,6 +48,9 @@
 #include <plat/iic.h>
 #include <plat/mfc.h>
 #include <plat/pd.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
@@ -63,6 +71,8 @@
 enum fixed_regulator_id {
 	FIXED_REG_ID_MMC = 0,
 	FIXED_REG_ID_MAX8903,
+	FIXED_REG_ID_CAM_A28V,
+	FIXED_REG_ID_CAM_12V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -199,6 +209,33 @@
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 1,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1280,
+		.yres		= 800,
+		.refresh	= 60,
+	},
+	.max_bpp	= 24,
+	.default_bpp	= 16,
+	.virtual_x	= 1280,
+	.virtual_y	= 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+	.win[0]		= &nuri_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
 	int gpio = EXYNOS4_GPE1(5);
@@ -1037,13 +1074,6 @@
 	},
 };
 
-static struct device *nuri_cm_devices[] = {
-	&s3c_device_i2c5.dev,
-	&s3c_device_adc.dev,
-	NULL, /* Reserved for UART */
-	NULL,
-};
-
 static void __init nuri_power_init(void)
 {
 	int gpio;
@@ -1088,10 +1118,141 @@
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* CAMERA */
+static struct regulator_consumer_supply cam_vdda_supply[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data cam_vdda_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
+	.consumer_supplies = cam_vdda_supply,
+};
+
+static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
+	.supply_name	= "CAM_IO_EN",
+	.microvolts	= 2800000,
+	.gpio		= EXYNOS4_GPE2(1), /* CAM_IO_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_vdda_reg_init_data,
+};
+
+static struct platform_device cam_vdda_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
+	.dev = { .platform_data	= &cam_vdda_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply camera_8m_12v_supply =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data cam_8m_12v_reg_init_data = {
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &camera_8m_12v_supply,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS
+	},
+};
+
+static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
+	.supply_name	= "8M_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_8m_12v_reg_init_data,
+};
+
+static struct platform_device cam_8m_12v_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
+	.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset = GPIO_CAM_MEGA_RST,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data	= &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
+	{
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.clk_frequency	= 24000000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= nuri_camera_sensors,
+	.num_clients	= ARRAY_SIZE(nuri_camera_sensors),
+};
+
+static struct gpio nuri_camera_gpios[] = {
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void nuri_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(nuri_camera_gpios,
+			       ARRAY_SIZE(nuri_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
+	if (!IS_ERR_VALUE(m5mols_board_info.irq))
+		s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
+	else
+		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_RST);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
+		pr_err("%s: Camera port A setup failed\n", __func__);
+		return;
+	}
+	/* Increase drive strength of the sensor clock output */
+	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
+static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
+	.frequency	= 400000U,
+	.sda_delay	= 200,
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
+	&s3c_device_i2c0,
 	&emmc_fixed_voltage,
+	&s5p_device_mipi_csis0,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -1106,6 +1267,9 @@
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&s5p_device_fimc_md,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1113,6 +1277,8 @@
 	&nuri_backlight_device,
 	&max8903_fixed_reg_dev,
 	&nuri_max8903_device,
+	&cam_vdda_fixed_rdev,
+	&cam_8m_12v_fixed_rdev,
 };
 
 static void __init nuri_map_io(void)
@@ -1133,6 +1299,7 @@
 	nuri_tsp_init();
 	nuri_power_init();
 
+	s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 	s3c_i2c3_set_platdata(&i2c3_data);
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
@@ -1142,12 +1309,23 @@
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
+	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
+	nuri_camera_init();
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(NURI, "NURI")
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
new file mode 100644
index 0000000..f80b563
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -0,0 +1,700 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *		http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <video/platform_lcd.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
+#include <plat/mfc.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+};
+
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+	.constraints	= {
+		.name		= "VDD_ABB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data	= {
+	.constraints	= {
+		.name		= "VDD_ALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
+	.consumer_supplies	= ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+	.constraints	= {
+		.name		= "VDD_RTC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
+	.consumer_supplies	= ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
+	.consumer_supplies	= ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+	.constraints	= {
+		.name		= "VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
+	.consumer_supplies	= ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+	.constraints	= {
+		.name		= "DVDD_SWB_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
+	.consumer_supplies	= ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+	.constraints	= {
+		.name		= "VDD_PLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_3V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
+	.consumer_supplies	= ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+	.constraints	= {
+		.name		= "AVDD18_SWB_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
+	.consumer_supplies	= ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+	.constraints	= {
+		.name		= "VDD_SWB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
+	.consumer_supplies	= ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+	.constraints	= {
+		.name		= "VDD_MIF_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_1.2V",
+		.min_uV		= 950000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
+	.consumer_supplies	= buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+	.constraints	= {
+		.name		= "VDDQ_M1M2_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+	.constraints	= {
+		.name		= "VDD_LCD_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.boot_on	= 1,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
+	.consumer_supplies	= buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+	{ MAX8997_LDO1,		&max8997_ldo1_data },
+	{ MAX8997_LDO2,		&max8997_ldo2_data },
+	{ MAX8997_LDO3,		&max8997_ldo3_data },
+	{ MAX8997_LDO4,		&max8997_ldo4_data },
+	{ MAX8997_LDO6,		&max8997_ldo6_data },
+	{ MAX8997_LDO7,		&max8997_ldo7_data },
+	{ MAX8997_LDO8,		&max8997_ldo8_data },
+	{ MAX8997_LDO9,		&max8997_ldo9_data },
+	{ MAX8997_LDO10,	&max8997_ldo10_data },
+	{ MAX8997_LDO11,	&max8997_ldo11_data },
+	{ MAX8997_LDO14,	&max8997_ldo14_data },
+	{ MAX8997_LDO17,	&max8997_ldo17_data },
+	{ MAX8997_LDO21,	&max8997_ldo21_data },
+	{ MAX8997_BUCK1,	&max8997_buck1_data },
+	{ MAX8997_BUCK2,	&max8997_buck2_data },
+	{ MAX8997_BUCK3,	&max8997_buck3_data },
+	{ MAX8997_BUCK5,	&max8997_buck5_data },
+	{ MAX8997_BUCK7,	&max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+	.regulators	= origen_max8997_regulators,
+
+	.wakeup	= true,
+	.buck1_gpiodvs	= false,
+	.buck2_gpiodvs	= false,
+	.buck5_gpiodvs	= false,
+	.irq_base	= IRQ_GPIO_END + 1,
+
+	.ignore_gpiodvs_side_effect = true,
+	.buck125_default_idx = 0x0,
+
+	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
+	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
+	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
+
+	.buck1_voltage[0]	= 1350000,
+	.buck1_voltage[1]	= 1300000,
+	.buck1_voltage[2]	= 1250000,
+	.buck1_voltage[3]	= 1200000,
+	.buck1_voltage[4]	= 1150000,
+	.buck1_voltage[5]	= 1100000,
+	.buck1_voltage[6]	= 1000000,
+	.buck1_voltage[7]	= 950000,
+
+	.buck2_voltage[0]	= 1100000,
+	.buck2_voltage[1]	= 1100000,
+	.buck2_voltage[2]	= 1100000,
+	.buck2_voltage[3]	= 1100000,
+	.buck2_voltage[4]	= 1000000,
+	.buck2_voltage[5]	= 1000000,
+	.buck2_voltage[6]	= 1000000,
+	.buck2_voltage[7]	= 1000000,
+
+	.buck5_voltage[0]	= 1200000,
+	.buck5_voltage[1]	= 1200000,
+	.buck5_voltage[2]	= 1200000,
+	.buck5_voltage[3]	= 1200000,
+	.buck5_voltage[4]	= 1200000,
+	.buck5_voltage[5]	= 1200000,
+	.buck5_voltage[6]	= 1200000,
+	.buck5_voltage[7]	= 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+		.platform_data	= &origen_max8997_pdata,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+	{
+		.code			= KEY_MENU,
+		.gpio			= EXYNOS4_GPX1(5),
+		.desc			= "gpio-keys: KEY_MENU",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_HOME,
+		.gpio			= EXYNOS4_GPX1(6),
+		.desc			= "gpio-keys: KEY_HOME",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_BACK,
+		.gpio			= EXYNOS4_GPX1(7),
+		.desc			= "gpio-keys: KEY_BACK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_UP,
+		.gpio			= EXYNOS4_GPX2(0),
+		.desc			= "gpio-keys: KEY_UP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_DOWN,
+		.gpio			= EXYNOS4_GPX2(1),
+		.desc			= "gpio-keys: KEY_DOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+	.buttons	= origen_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+	.name		= "gpio-keys",
+	.dev		= {
+		.platform_data	= &origen_gpio_keys_data,
+	},
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	int ret;
+
+	if (power)
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_HIGH, "GPE3_4");
+	else
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+	gpio_free(EXYNOS4_GPE3(4));
+
+	if (ret)
+		pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+	.set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 16,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1024,
+		.yres		= 600,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+	.win[0]		= &origen_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_i2c0,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimd0,
+	&s5p_device_hdmi,
+	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
+	&s5p_device_mixer,
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_TV],
+	&exynos4_device_pd[PD_G3D],
+	&exynos4_device_pd[PD_LCD1],
+	&exynos4_device_pd[PD_CAM],
+	&exynos4_device_pd[PD_GPS],
+	&exynos4_device_pd[PD_MFC],
+	&origen_device_gpiokeys,
+	&origen_lcd_hv070wsa,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+	.no		= EXYNOS4_GPD0(0),
+	.func		= S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+	.pwm_id		= 0,
+	.pwm_period_ns	= 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+	/* Direct HPD to HDMI chip */
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_power_init(void)
+{
+	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
+static void __init origen_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+static void __init origen_machine_init(void)
+{
+	origen_power_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+	/*
+	 * Since sdhci instance 2 can contain a bootable media,
+	 * sdhci instance 0 is registered after instance 2.
+	 */
+	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+	origen_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
+	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
+	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+
+	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= origen_map_io,
+	.init_machine	= origen_machine_init,
+	.timer		= &exynos4_timer,
+	.reserve	= &origen_reserve,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
similarity index 100%
rename from arch/arm/mach-exynos4/mach-smdk4x12.c
rename to arch/arm/mach-exynos/mach-smdk4x12.c
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
similarity index 87%
rename from arch/arm/mach-exynos4/mach-smdkv310.c
rename to arch/arm/mach-exynos/mach-smdkv310.c
index 2c1a076..cec2afa 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -37,6 +37,9 @@
 #include <plat/pd.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -232,17 +235,36 @@
 	{I2C_BOARD_INFO("wm8994", 0x1a),},
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c1,
+	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_G3D],
 	&exynos4_device_pd[PD_LCD0],
@@ -258,6 +280,8 @@
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
+	&s5p_device_hdmi,
+	&s5p_device_mixer,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -294,6 +318,18 @@
 	.pwm_period_ns  = 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -301,6 +337,11 @@
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
+static void __init smdkv310_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv310_machine_init(void)
 {
 	s3c_i2c1_set_platdata(NULL);
@@ -313,12 +354,19 @@
 	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
+	smdkv310_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
@@ -329,6 +377,7 @@
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
similarity index 67%
rename from arch/arm/mach-exynos4/mach-universal_c210.c
rename to arch/arm/mach-exynos/mach-universal_c210.c
index 2aac6f7..a2a177f 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
 #include <plat/devs.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -110,6 +120,9 @@
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);
 
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
 static struct regulator_init_data lp3974_buck1_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V",
@@ -153,6 +166,8 @@
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo3_data = {
 	.constraints	= {
 		.name		= "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+	.consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
 };
 
 static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+	.consumer_supplies = lp3974_ldo4_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo7_data = {
 	.constraints	= {
 		.name		= "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
+	.consumer_supplies	= lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+	.consumer_supplies = lp3974_ldo8_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+	REGULATOR_SUPPLY("dig_28", "0-001f");
+
 static struct regulator_init_data lp3974_ldo11_data = {
 	.constraints	= {
 		.name		= "CAM_AF_3.3V",
@@ -297,6 +341,8 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo11_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+	REGULATOR_SUPPLY("dig_18", "0-001f");
+
 static struct regulator_init_data lp3974_ldo14_data = {
 	.constraints	= {
 		.name		= "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo14_consumer,
 };
 
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
 static struct regulator_init_data lp3974_ldo15_data = {
 	.constraints	= {
 		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
 static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
+	.consumer_supplies	= lp3974_ldo16_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@
 	.wakeup			= true,
 };
 
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC0,
+	FIXED_REG_ID_HDMI_5V,
+	FIXED_REG_ID_CAM_S_IF,
+	FIXED_REG_ID_CAM_I_CORE,
+	FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "HDMI_5V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+	.supply_name		= "HDMI_EN1",
+	.microvolts		= 5000000,
+	.gpio			= EXYNOS4_GPE0(1),
+	.enable_high		= true,
+	.init_data		= &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= FIXED_REG_ID_HDMI_5V,
+	.dev			= {
+		.platform_data	= &hdmi_fixed_voltage_config,
+	},
+};
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	{
@@ -573,6 +673,11 @@
 	gpio_direction_output(gpio, 1);
 }
 
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+	.frequency	= 300 * 1000,
+	.sda_delay	= 200,
+};
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -658,7 +763,7 @@
 
 static struct platform_device mmc0_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 0,
+	.id			= FIXED_REG_ID_MMC0,
 	.dev			= {
 		.platform_data	= &mmc0_fixed_voltage_config,
 	},
@@ -692,18 +797,165 @@
 	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
 }
 
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	/* Camera, To be updated */
-};
-
 /* I2C1 */
 static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+	.win[0]		= &universal_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+	REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+	.supply_name	= "CAM_I_CORE_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+	REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+	.supply_name	= "CAM_S_IF_1.8V",
+	.microvolts	= 1800000,
+	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
+	.enable_high	= 1,
+	.init_data	= &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+	return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset	= GPIO_CAM_MEGA_nRST,
+	.reset_polarity	= 0,
+	.set_power	= m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 21600000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= universal_camera_sensors,
+	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
+};
+
+static struct gpio universal_camera_gpios[] = {
+	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(universal_camera_gpios,
+			       ARRAY_SIZE(universal_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+	else
+		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_nRST);
+	gpio_free(GPIO_CAM_8M_ISP_INT);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+		pr_err("Camera port A setup failed\n");
+}
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -712,17 +964,30 @@
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
+	&s5p_device_i2c_hdmiphy,
+	&hdmi_fixed_voltage,
+	&exynos4_device_pd[PD_TV],
+	&s5p_device_hdmi,
+	&s5p_device_sdo,
+	&s5p_device_mixer,
 
 	/* Universal Devices */
 	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&cam_i_core_fixed_reg_dev,
+	&cam_s_if_fixed_reg_dev,
+	&s5p_device_fimc_md,
 };
 
 static void __init universal_map_io(void)
@@ -732,6 +997,20 @@
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+	gpio_direction_input(EXYNOS4_GPX3(7));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init universal_reserve(void)
 {
 	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1019,9 @@
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
+	s5p_tv_setup();
 
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
 	universal_tsp_init();
@@ -749,15 +1029,28 @@
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 
 	s3c_i2c5_set_platdata(NULL);
+	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	universal_camera_init();
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos/mct.c
similarity index 91%
rename from arch/arm/mach-exynos4/mct.c
rename to arch/arm/mach-exynos/mct.c
index f191608..97343df 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,7 +44,7 @@
 	char name[10];
 };
 
-struct mct_clock_event_device mct_tick[NR_CPUS];
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
 
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
@@ -302,7 +302,7 @@
 static int exynos4_tick_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
 
 	exynos4_mct_tick_start(cycles, mevt);
 
@@ -312,7 +312,7 @@
 static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 					 struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()];
+	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
 
 	exynos4_mct_tick_stop(mevt);
 
@@ -376,14 +376,16 @@
 
 static void exynos4_mct_tick_init(struct clock_event_device *evt)
 {
+	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
 
-	mct_tick[cpu].evt = evt;
+	mevt = this_cpu_ptr(&percpu_mct_tick);
+	mevt->evt = evt;
 
-	mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
-	sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mevt->name, "mct_tick%d", cpu);
 
-	evt->name = mct_tick[cpu].name;
+	evt->name = mevt->name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
 	evt->set_mode = exynos4_tick_set_mode;
@@ -398,21 +400,21 @@
 
 	clockevents_register_device(evt);
 
-	exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
+	exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
-			mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+			mct_tick0_event_irq.dev_id = mevt;
 			evt->irq = IRQ_MCT_L0;
 			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
 		} else {
-			mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+			mct_tick1_event_irq.dev_id = mevt;
 			evt->irq = IRQ_MCT_L1;
 			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
 			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
 		}
 	} else {
-		gic_enable_ppi(IRQ_MCT_LOCALTIMER);
+		enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
 	}
 }
 
@@ -427,9 +429,11 @@
 void local_timer_stop(struct clock_event_device *evt)
 {
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	disable_irq(evt->irq);
+	if (mct_int_type == MCT_INT_SPI)
+		disable_irq(evt->irq);
+	else
+		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
-
 #endif /* CONFIG_LOCAL_TIMERS */
 
 static void __init exynos4_timer_resources(void)
@@ -438,6 +442,16 @@
 	mct_clk = clk_get(NULL, "xtal");
 
 	clk_rate = clk_get_rate(mct_clk);
+
+	if (mct_int_type == MCT_INT_PPI) {
+		int err;
+
+		err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+					 exynos4_mct_tick_isr, "MCT",
+					 &percpu_mct_tick);
+		WARN(err, "MCT: can't request IRQ %d (%d)\n",
+		     IRQ_MCT_LOCALTIMER, err);
+	}
 }
 
 static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos/platsmp.c
similarity index 99%
rename from arch/arm/mach-exynos4/platsmp.c
rename to arch/arm/mach-exynos/platsmp.c
index 0559540..69ffb2f 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -110,8 +110,6 @@
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
-
-	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos/pm.c
similarity index 98%
rename from arch/arm/mach-exynos4/pm.c
rename to arch/arm/mach-exynos/pm.c
index 62e4f43..509a435 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -339,6 +339,13 @@
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
+	if (soc_is_exynos4212()) {
+		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+			 S5P_USE_STANDBYWFE_ISP_ARM);
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	/* Save Power control register */
 	asm ("mrc p15, 0, %0, c15, c0, 0"
 	     : "=r" (tmp) : : "cc");
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
new file mode 100644
index 0000000..bba48f5
--- /dev/null
+++ b/arch/arm/mach-exynos/pmu.c
@@ -0,0 +1,230 @@
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int i;
+
+	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos4_pmu_config[i].val[mode],
+				exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+	exynos4_pmu_config = exynos4210_pmu_config;
+
+	if (soc_is_exynos4210()) {
+		exynos4_pmu_config = exynos4210_pmu_config;
+		pr_info("EXYNOS4210 PMU Initialize\n");
+	} else if (soc_is_exynos4212()) {
+		exynos4_pmu_config = exynos4212_pmu_config;
+		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else {
+		pr_info("EXYNOS4: PMU not supported\n");
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_pmu_init);
diff --git a/arch/arm/mach-exynos4/setup-fimc.c b/arch/arm/mach-exynos/setup-fimc.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-fimc.c
rename to arch/arm/mach-exynos/setup-fimc.c
diff --git a/arch/arm/mach-exynos4/setup-fimd0.c b/arch/arm/mach-exynos/setup-fimd0.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-fimd0.c
rename to arch/arm/mach-exynos/setup-fimd0.c
diff --git a/arch/arm/mach-exynos4/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c0.c
rename to arch/arm/mach-exynos/setup-i2c0.c
diff --git a/arch/arm/mach-exynos4/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c1.c
rename to arch/arm/mach-exynos/setup-i2c1.c
diff --git a/arch/arm/mach-exynos4/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c2.c
rename to arch/arm/mach-exynos/setup-i2c2.c
diff --git a/arch/arm/mach-exynos4/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c3.c
rename to arch/arm/mach-exynos/setup-i2c3.c
diff --git a/arch/arm/mach-exynos4/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c4.c
rename to arch/arm/mach-exynos/setup-i2c4.c
diff --git a/arch/arm/mach-exynos4/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c5.c
rename to arch/arm/mach-exynos/setup-i2c5.c
diff --git a/arch/arm/mach-exynos4/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c6.c
rename to arch/arm/mach-exynos/setup-i2c6.c
diff --git a/arch/arm/mach-exynos4/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-i2c7.c
rename to arch/arm/mach-exynos/setup-i2c7.c
diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos/setup-keypad.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-keypad.c
rename to arch/arm/mach-exynos/setup-keypad.c
diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-sdhci-gpio.c
rename to arch/arm/mach-exynos/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c
new file mode 100644
index 0000000..92937b4
--- /dev/null
+++ b/arch/arm/mach-exynos/setup-sdhci.c
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-exynos4/setup-sdhci.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *exynos4_hsmmc_clksrcs[4] = {
+	[0] = NULL,
+	[1] = NULL,
+	[2] = "sclk_mmc",	/* mmc_bus */
+	[3] = NULL,
+};
diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
similarity index 100%
rename from arch/arm/mach-exynos4/setup-usb-phy.c
rename to arch/arm/mach-exynos/setup-usb-phy.c
diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
deleted file mode 100644
index 564bb53..0000000
--- a/arch/arm/mach-exynos4/dma.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource exynos4_pdma0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA0,
-		.end	= EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM2_RX,
-		[3] = DMACH_PCM2_TX,
-		[4] = DMACH_MSM_REQ0,
-		[5] = DMACH_MSM_REQ2,
-		[6] = DMACH_SPI0_RX,
-		[7] = DMACH_SPI0_TX,
-		[8] = DMACH_SPI2_RX,
-		[9] = DMACH_SPI2_TX,
-		[10] = DMACH_I2S0S_TX,
-		[11] = DMACH_I2S0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S2_RX,
-		[14] = DMACH_I2S2_TX,
-		[15] = DMACH_UART0_RX,
-		[16] = DMACH_UART0_TX,
-		[17] = DMACH_UART2_RX,
-		[18] = DMACH_UART2_TX,
-		[19] = DMACH_UART4_RX,
-		[20] = DMACH_UART4_TX,
-		[21] = DMACH_SLIMBUS0_RX,
-		[22] = DMACH_SLIMBUS0_TX,
-		[23] = DMACH_SLIMBUS2_RX,
-		[24] = DMACH_SLIMBUS2_TX,
-		[25] = DMACH_SLIMBUS4_RX,
-		[26] = DMACH_SLIMBUS4_TX,
-		[27] = DMACH_AC97_MICIN,
-		[28] = DMACH_AC97_PCMIN,
-		[29] = DMACH_AC97_PCMOUT,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
-};
-
-static struct platform_device exynos4_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma0_resource),
-	.resource	= exynos4_pdma0_resource,
-	.dev		= {
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma0_pdata,
-	},
-};
-
-static struct resource exynos4_pdma1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA1,
-		.end	= EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM1_RX,
-		[3] = DMACH_PCM1_TX,
-		[4] = DMACH_MSM_REQ1,
-		[5] = DMACH_MSM_REQ3,
-		[6] = DMACH_SPI1_RX,
-		[7] = DMACH_SPI1_TX,
-		[8] = DMACH_I2S0S_TX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S1_RX,
-		[12] = DMACH_I2S1_TX,
-		[13] = DMACH_UART0_RX,
-		[14] = DMACH_UART0_TX,
-		[15] = DMACH_UART1_RX,
-		[16] = DMACH_UART1_TX,
-		[17] = DMACH_UART3_RX,
-		[18] = DMACH_UART3_TX,
-		[19] = DMACH_SLIMBUS1_RX,
-		[20] = DMACH_SLIMBUS1_TX,
-		[21] = DMACH_SLIMBUS3_RX,
-		[22] = DMACH_SLIMBUS3_TX,
-		[23] = DMACH_SLIMBUS5_RX,
-		[24] = DMACH_SLIMBUS5_TX,
-		[25] = DMACH_SLIMBUS0AUX_RX,
-		[26] = DMACH_SLIMBUS0AUX_TX,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
-};
-
-static struct platform_device exynos4_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma1_resource),
-	.resource	= exynos4_pdma1_resource,
-	.dev		= {
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma1_pdata,
-	},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
-	&exynos4_device_pdma0,
-	&exynos4_device_pdma1,
-};
-
-static int __init exynos4_dma_init(void)
-{
-	platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
-
-	return 0;
-}
-arch_initcall(exynos4_dma_init);
diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-exynos4/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
deleted file mode 100644
index b5f6f38..0000000
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- *		http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct platform_device *origen_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-};
-
-static void __init origen_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
-}
-
-static void __init origen_machine_init(void)
-{
-	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
-	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
-	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= origen_map_io,
-	.init_machine	= origen_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
deleted file mode 100644
index 7ea9eb2..0000000
--- a/arch/arm/mach-exynos4/pmu.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* linux/arch/arm/mach-exynos4/pmu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4210 - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <mach/regs-clock.h>
-#include <mach/pmu.h>
-
-static void __iomem *sys_powerdown_reg[] = {
-	S5P_ARM_CORE0_LOWPWR,
-	S5P_DIS_IRQ_CORE0,
-	S5P_DIS_IRQ_CENTRAL0,
-	S5P_ARM_CORE1_LOWPWR,
-	S5P_DIS_IRQ_CORE1,
-	S5P_DIS_IRQ_CENTRAL1,
-	S5P_ARM_COMMON_LOWPWR,
-	S5P_L2_0_LOWPWR,
-	S5P_L2_1_LOWPWR,
-	S5P_CMU_ACLKSTOP_LOWPWR,
-	S5P_CMU_SCLKSTOP_LOWPWR,
-	S5P_CMU_RESET_LOWPWR,
-	S5P_APLL_SYSCLK_LOWPWR,
-	S5P_MPLL_SYSCLK_LOWPWR,
-	S5P_VPLL_SYSCLK_LOWPWR,
-	S5P_EPLL_SYSCLK_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
-	S5P_CMU_RESET_GPSALIVE_LOWPWR,
-	S5P_CMU_CLKSTOP_CAM_LOWPWR,
-	S5P_CMU_CLKSTOP_TV_LOWPWR,
-	S5P_CMU_CLKSTOP_MFC_LOWPWR,
-	S5P_CMU_CLKSTOP_G3D_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
-	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_LOWPWR,
-	S5P_CMU_RESET_CAM_LOWPWR,
-	S5P_CMU_RESET_TV_LOWPWR,
-	S5P_CMU_RESET_MFC_LOWPWR,
-	S5P_CMU_RESET_G3D_LOWPWR,
-	S5P_CMU_RESET_LCD0_LOWPWR,
-	S5P_CMU_RESET_LCD1_LOWPWR,
-	S5P_CMU_RESET_MAUDIO_LOWPWR,
-	S5P_CMU_RESET_GPS_LOWPWR,
-	S5P_TOP_BUS_LOWPWR,
-	S5P_TOP_RETENTION_LOWPWR,
-	S5P_TOP_PWR_LOWPWR,
-	S5P_LOGIC_RESET_LOWPWR,
-	S5P_ONENAND_MEM_LOWPWR,
-	S5P_MODIMIF_MEM_LOWPWR,
-	S5P_G2D_ACP_MEM_LOWPWR,
-	S5P_USBOTG_MEM_LOWPWR,
-	S5P_HSMMC_MEM_LOWPWR,
-	S5P_CSSYS_MEM_LOWPWR,
-	S5P_SECSS_MEM_LOWPWR,
-	S5P_PCIE_MEM_LOWPWR,
-	S5P_SATA_MEM_LOWPWR,
-	S5P_PAD_RETENTION_DRAM_LOWPWR,
-	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
-	S5P_PAD_RETENTION_GPIO_LOWPWR,
-	S5P_PAD_RETENTION_UART_LOWPWR,
-	S5P_PAD_RETENTION_MMCA_LOWPWR,
-	S5P_PAD_RETENTION_MMCB_LOWPWR,
-	S5P_PAD_RETENTION_EBIA_LOWPWR,
-	S5P_PAD_RETENTION_EBIB_LOWPWR,
-	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
-	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
-	S5P_XUSBXTI_LOWPWR,
-	S5P_XXTI_LOWPWR,
-	S5P_EXT_REGULATOR_LOWPWR,
-	S5P_GPIO_MODE_LOWPWR,
-	S5P_GPIO_MODE_MAUDIO_LOWPWR,
-	S5P_CAM_LOWPWR,
-	S5P_TV_LOWPWR,
-	S5P_MFC_LOWPWR,
-	S5P_G3D_LOWPWR,
-	S5P_LCD0_LOWPWR,
-	S5P_LCD1_LOWPWR,
-	S5P_MAUDIO_LOWPWR,
-	S5P_GPS_LOWPWR,
-	S5P_GPS_ALIVE_LOWPWR,
-};
-
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
-	/* { AFTR, LPA, SLEEP }*/
-	{ 0, 0, 2 },	/* ARM_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
-	{ 0, 0, 2 },	/* ARM_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
-	{ 0, 0, 2 },	/* ARM_COMMON */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
-	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
-	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
-	{ 1, 1, 0 },	/* CMU_RESET */
-	{ 1, 0, 0 },	/* APLL_SYSCLK */
-	{ 1, 0, 0 },	/* MPLL_SYSCLK */
-	{ 1, 0, 0 },	/* VPLL_SYSCLK */
-	{ 1, 1, 0 },	/* EPLL_SYSCLK */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
-	{ 1, 1, 0 },	/* CMU_RESET_CAM */
-	{ 1, 1, 0 },	/* CMU_RESET_TV */
-	{ 1, 1, 0 },	/* CMU_RESET_MFC */
-	{ 1, 1, 0 },	/* CMU_RESET_G3D */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
-	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS */
-	{ 3, 0, 0 },	/* TOP_BUS */
-	{ 1, 0, 1 },	/* TOP_RETENTION */
-	{ 3, 0, 3 },	/* TOP_PWR */
-	{ 1, 1, 0 },	/* LOGIC_RESET */
-	{ 3, 0, 0 },	/* ONENAND_MEM */
-	{ 3, 0, 0 },	/* MODIMIF_MEM */
-	{ 3, 0, 0 },	/* G2D_ACP_MEM */
-	{ 3, 0, 0 },	/* USBOTG_MEM */
-	{ 3, 0, 0 },	/* HSMMC_MEM */
-	{ 3, 0, 0 },	/* CSSYS_MEM */
-	{ 3, 0, 0 },	/* SECSS_MEM */
-	{ 3, 0, 0 },	/* PCIE_MEM */
-	{ 3, 0, 0 },	/* SATA_MEM */
-	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
-	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
-	{ 1, 1, 0 },	/* XUSBXTI */
-	{ 1, 1, 0 },	/* XXTI */
-	{ 1, 1, 0 },	/* EXT_REGULATOR */
-	{ 1, 0, 0 },	/* GPIO_MODE */
-	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
-	{ 7, 0, 0 },	/* CAM */
-	{ 7, 0, 0 },	/* TV */
-	{ 7, 0, 0 },	/* MFC */
-	{ 7, 0, 0 },	/* G3D */
-	{ 7, 0, 0 },	/* LCD0 */
-	{ 7, 0, 0 },	/* LCD1 */
-	{ 7, 7, 0 },	/* MAUDIO */
-	{ 7, 0, 0 },	/* GPS */
-	{ 7, 0, 0 },	/* GPS_ALIVE */
-};
-
-void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
-
-	for (; count > 0; count--)
-		__raw_writel(sys_powerdown_val[count - 1][mode],
-				sys_powerdown_reg[count - 1]);
-}
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
deleted file mode 100644
index 1e83f8c..0000000
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
-	[0] = NULL,
-	[1] = NULL,
-	[2] = "sclk_mmc",	/* mmc_bus */
-	[3] = NULL,
-};
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
-				  struct mmc_ios *ios, struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
-	/* select base clock source to HCLK */
-
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
-	/*
-	 * clear async mode, enable conflict mask, rx feedback ctrl, SD
-	 * clk hold and no use debounce count
-	 */
-
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	/* Tx and Rx feedback clock delay control */
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index b82dcf0..88660d5 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/unified.h>
@@ -72,6 +73,9 @@
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
 	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..c44aa97 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -10,11 +10,6 @@
 config HAVE_IMX_SRC
 	bool
 
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX1
 	bool
 
@@ -27,12 +22,6 @@
 config MACH_MX27
 	bool
 
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -72,7 +61,6 @@
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -82,7 +70,6 @@
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
-	select ARCH_MX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 22d8588..cfede57 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,22 +1,26 @@
-zreladdr-$(CONFIG_ARCH_MX1)	+= 0x08008000
-params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
+params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
 
-zreladdr-$(CONFIG_MACH_MX21)	+= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
 
-zreladdr-$(CONFIG_ARCH_MX25)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
 
-zreladdr-$(CONFIG_MACH_MX27)	+= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
 
-zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index e0b926d..039a7ab 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1139,7 +1139,7 @@
 		return -EINVAL;
 
 	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_pred >> d->bp_pred) + 1);
+		  ((d->bm_podf >> d->bp_podf) + 1);
 
 	div = parent_rate / rate;
 	if (div == 0)
@@ -1953,14 +1953,17 @@
 	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
 };
 
+void __init imx6q_clock_map_io(void)
+{
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
 
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-
 	/* retrieve the freqency of fixed clocks from device tree */
 	for_each_compatible_node(np, NULL, "fixed-clock") {
 		u32 rate;
@@ -2002,6 +2005,21 @@
 	clk_set_rate(&asrc_serial_clk, 1500000);
 	clk_set_rate(&enfc_clk, 11000000);
 
+	/*
+	 * Before pinctrl API is available, we have to rely on the pad
+	 * configuration set up by bootloader.  For usdhc example here,
+	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+	 *
+	 * FIXME: This is should be removed after pinctrl API is available.
+	 * At that time, usdhc driver can call pinctrl API to change pad
+	 * configuration dynamically per different usdhc clock settings.
+	 */
+	clk_set_rate(&usdhc1_clk, 49500000);
+	clk_set_rate(&usdhc2_clk, 49500000);
+	clk_set_rate(&usdhc3_clk, 49500000);
+	clk_set_rate(&usdhc4_clk, 49500000);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 8bf5fa3..9cd860a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -34,6 +34,7 @@
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
 static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index cfa8417..ba232d7 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -293,8 +293,7 @@
 		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
 
 	},
-	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
-	MC13783_USE_RTC,
+	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
 };
 
 /* SPI */
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 60f1fda..b8c54b8 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -492,7 +492,7 @@
 		.regulators = mx31_3ds_regulators,
 		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
 	},
-	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+	.flags  = MC13XXX_USE_TOUCHSCREEN,
 };
 
 /* SPI */
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 5defd8e..102ec99 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/moduleparam.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index c97c26d..5366d2d 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -21,6 +21,7 @@
 #include <linux/memory.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/moduleparam.h>
 #include <linux/smsc911x.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
@@ -112,8 +113,7 @@
 };
 
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
-	.flags  = MC13XXX_USE_RTC |
-		  MC13XXX_USE_REGULATOR,
+	.flags = MC13XXX_USE_RTC,
 };
 
 static struct spi_board_info mc13783_spi_dev __initdata = {
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index fff7791..9326915 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/moduleparam.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
@@ -31,6 +32,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/input.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -225,7 +227,7 @@
 	},
 };
 
-static struct mc13783_led_platform_data moboard_led[] = {
+static struct mc13xxx_led_platform_data moboard_led[] = {
 	{
 		.id = MC13783_LED_R1,
 		.name = "coreboard-led-4:red",
@@ -258,7 +260,7 @@
 	},
 };
 
-static struct mc13783_leds_platform_data moboard_leds = {
+static struct mc13xxx_leds_platform_data moboard_leds = {
 	.num_leds = ARRAY_SIZE(moboard_led),
 	.led = moboard_led,
 	.flags = MC13783_LED_SLEWLIMTC,
@@ -267,14 +269,20 @@
 	.tc2_period = MC13783_LED_PERIOD_10MS,
 };
 
+static struct mc13xxx_buttons_platform_data moboard_buttons = {
+	.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
+			MC13783_BUTTON_POL_INVERT,
+	.b1on_key = KEY_POWER,
+};
+
 static struct mc13xxx_platform_data moboard_pmic = {
 	.regulators = {
 		.regulators = moboard_regulators,
 		.num_regulators = ARRAY_SIZE(moboard_regulators),
 	},
 	.leds = &moboard_leds,
-	.flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
-		MC13XXX_USE_ADC | MC13XXX_USE_LED,
+	.buttons = &moboard_buttons,
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 100bc73..a17e9c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -268,8 +268,7 @@
 		.regulators = pcm038_regulators,
 		.num_regulators = ARRAY_SIZE(pcm038_regulators),
 	},
-	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
-		 MC13783_USE_TOUCHSCREEN,
+	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
 };
 
 static struct spi_board_info pcm038_spi_board_info[] __initdata = {
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9f0e82e..31807d2 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -33,29 +33,32 @@
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
+
+	if (!need_resched())
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -108,6 +111,7 @@
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 }
 
+#ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@@ -126,33 +130,11 @@
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
-	imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
+	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
@@ -161,11 +143,6 @@
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 	.per_2_per_addr = 1677,
 };
@@ -199,6 +176,35 @@
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	pm_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
 
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
@@ -254,3 +260,4 @@
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 36cacbd..a8e3368 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <asm/unified.h>
 
 #define SRC_SCR				0x000
@@ -23,10 +24,15 @@
 
 static void __iomem *src_base;
 
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu)		0
+#endif
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
+	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
@@ -35,6 +41,7 @@
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
+	cpu = cpu_logical_map(cpu);
 	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
 		       src_base + SRC_GPR1 + cpu * 8);
 }
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 251c408..db012fa 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
+#include <linux/export.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 59a5126..24f0fe3 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -25,6 +25,7 @@
 #include <linux/bitops.h>
 #include <linux/serial_8250.h>
 #include <linux/mm.h>
+#include <linux/export.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index f72a3a8..8325058 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/export.h>
 #include <asm/dma-mapping.h>
 
 #include <asm/cputype.h>
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 0777257..b86a005 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -28,6 +28,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include <mach/udc.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index f68d33f..7088180 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
 #include <asm/proc-fns.h>
 #include <mach/kirkwood.h>
 
@@ -32,17 +33,18 @@
 
 /* Actual code that puts the SoC in different idle states */
 static int kirkwood_enter_idle(struct cpuidle_device *dev,
-			       struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+			       int index)
 {
 	struct timeval before, after;
 	int idle_time;
 
 	local_irq_disable();
 	do_gettimeofday(&before);
-	if (state == &dev->states[0])
+	if (index == 0)
 		/* Wait for interrupt state */
 		cpu_do_idle();
-	else if (state == &dev->states[1]) {
+	else if (index == 1) {
 		/*
 		 * Following write will put DDR in self refresh.
 		 * Note that we have 256 cycles before DDR puts it
@@ -57,35 +59,40 @@
 	local_irq_enable();
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
 			(after.tv_usec - before.tv_usec);
-	return idle_time;
+
+	/* Update last residency */
+	dev->last_residency = idle_time;
+
+	return index;
 }
 
 /* Initialize CPU idle by registering the idle states */
 static int kirkwood_init_cpuidle(void)
 {
 	struct cpuidle_device *device;
-
-	cpuidle_register_driver(&kirkwood_idle_driver);
+	struct cpuidle_driver *driver = &kirkwood_idle_driver;
 
 	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
 	device->state_count = KIRKWOOD_MAX_STATES;
+	driver->state_count = KIRKWOOD_MAX_STATES;
 
 	/* Wait for interrupt state */
-	device->states[0].enter = kirkwood_enter_idle;
-	device->states[0].exit_latency = 1;
-	device->states[0].target_residency = 10000;
-	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[0].name, "WFI");
-	strcpy(device->states[0].desc, "Wait for interrupt");
+	driver->states[0].enter = kirkwood_enter_idle;
+	driver->states[0].exit_latency = 1;
+	driver->states[0].target_residency = 10000;
+	driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[0].name, "WFI");
+	strcpy(driver->states[0].desc, "Wait for interrupt");
 
 	/* Wait for interrupt and DDR self refresh state */
-	device->states[1].enter = kirkwood_enter_idle;
-	device->states[1].exit_latency = 10;
-	device->states[1].target_residency = 10000;
-	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(device->states[1].name, "DDR SR");
-	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+	driver->states[1].enter = kirkwood_enter_idle;
+	driver->states[1].exit_latency = 10;
+	driver->states[1].target_residency = 10000;
+	driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(driver->states[1].name, "DDR SR");
+	strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
 
+	cpuidle_register_driver(&kirkwood_idle_driver);
 	if (cpuidle_register_device(device)) {
 		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
 		return -EIO;
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8f948f9..ba254a7 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -7,7 +7,7 @@
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
 obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5ad7..7a60bbb 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -167,8 +167,9 @@
 
 static struct pxa3xx_nand_platform_data aspenite_nand_info = {
 	.enable_arbiter	= 1,
-	.parts		= aspenite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+	.num_cs = 1,
+	.parts[0]	= aspenite_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
 static struct i2c_board_info aspenite_i2c_info[] __initdata = {
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index e411252..983cfb1 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -185,6 +185,15 @@
 		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
 };
 
+static struct sram_platdata mmp2_asram_platdata = {
+	.pool_name	= "asram",
+	.granularity	= SRAM_GRANULARITY,
+};
+
+static struct sram_platdata mmp2_isram_platdata = {
+	.pool_name	= "isram",
+	.granularity	= SRAM_GRANULARITY,
+};
 
 static void __init brownstone_init(void)
 {
@@ -196,6 +205,8 @@
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+	mmp2_add_asram(&mmp2_asram_platdata);
+	mmp2_add_isram(&mmp2_isram_platdata);
 
 	/* enable 5v regulator */
 	platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 6915656..4665767 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -182,7 +182,7 @@
 
 	/* on-chip devices */
 	pxa168_add_uart(3);
-	pxa168_add_ssp(0);
+	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index d14eeaf..99b4ce1 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index de7b888..2f7b2d3 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
+#include <mach/sram.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
@@ -28,6 +29,8 @@
 extern struct pxa_device_desc mmp2_device_sdh1;
 extern struct pxa_device_desc mmp2_device_sdh2;
 extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct pxa_device_desc mmp2_device_asram;
+extern struct pxa_device_desc mmp2_device_isram;
 
 static inline int mmp2_add_uart(int id)
 {
@@ -85,5 +88,15 @@
 	return pxa_register_device(d, data, sizeof(*data));
 }
 
+static inline int mmp2_add_asram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+}
+
+static inline int mmp2_add_isram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_MMP2_H */
 
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
new file mode 100644
index 0000000..239e0fc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/sram.h
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ *  SRAM Memory Management
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+enum sram_type {
+	MMP_SRAM_UNDEFINED = 0,
+	MMP_ASRAM,
+	MMP_ISRAM,
+};
+
+struct sram_platdata {
+	char *pool_name;
+	int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 7a7e8e4..5dd1d4a 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -226,4 +226,7 @@
 MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
 MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
 MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
+/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
+MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
 
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
new file mode 100644
index 0000000..4304f95
--- /dev/null
+++ b/arch/arm/mach-mmp/sram.c
@@ -0,0 +1,168 @@
+/*
+ *  linux/arch/arm/mach-mmp/sram.c
+ *
+ *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *  All Rights Reserved
+ *
+ *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+	char *pool_name;
+	struct gen_pool *gpool;
+	int granularity;
+
+	phys_addr_t sram_phys;
+	void __iomem *sram_virt;
+	u32 sram_size;
+
+	struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+	struct sram_bank_info *info = NULL;
+
+	if (!pool_name)
+		return NULL;
+
+	mutex_lock(&sram_lock);
+
+	list_for_each_entry(info, &sram_bank_list, node)
+		if (!strcmp(pool_name, info->pool_name))
+			break;
+
+	mutex_unlock(&sram_lock);
+
+	if (&info->node == &sram_bank_list)
+		return NULL;
+
+	return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+	struct sram_platdata *pdata = pdev->dev.platform_data;
+	struct sram_bank_info *info;
+	struct resource *res;
+	int ret = 0;
+
+	if (!pdata && !pdata->pool_name)
+		return -ENODEV;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (!resource_size(res))
+		return 0;
+
+	info->sram_phys   = (phys_addr_t)res->start;
+	info->sram_size   = resource_size(res);
+	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
+	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
+	info->granularity = pdata->granularity;
+
+	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+	if (!info->gpool) {
+		dev_err(&pdev->dev, "create pool failed\n");
+		ret = -ENOMEM;
+		goto create_pool_err;
+	}
+
+	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+				info->sram_phys, info->sram_size, -1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "add new chunk failed\n");
+		ret = -ENOMEM;
+		goto add_chunk_err;
+	}
+
+	mutex_lock(&sram_lock);
+	list_add(&info->node, &sram_bank_list);
+	mutex_unlock(&sram_lock);
+
+	platform_set_drvdata(pdev, info);
+
+	dev_info(&pdev->dev, "initialized\n");
+	return 0;
+
+add_chunk_err:
+	gen_pool_destroy(info->gpool);
+create_pool_err:
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+	struct sram_bank_info *info;
+
+	info = platform_get_drvdata(pdev);
+	if (info == NULL)
+		return -ENODEV;
+
+	mutex_lock(&sram_lock);
+	list_del(&info->node);
+	mutex_unlock(&sram_lock);
+
+	gen_pool_destroy(info->gpool);
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+	kfree(info);
+	return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+	{ "asram", MMP_ASRAM },
+	{ "isram", MMP_ISRAM },
+	{ }
+};
+
+static struct platform_driver sram_driver = {
+	.probe		= sram_probe,
+	.remove		= sram_remove,
+	.driver		= {
+		.name	= "mmp-sram",
+	},
+	.id_table	= sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+	return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4285dfd..4ad3969 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -15,6 +15,8 @@
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 71de506..db81ed53 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -42,8 +42,8 @@
 
 extern struct sys_timer msm_timer;
 
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index b04468e..6dc1cbd 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -32,8 +32,8 @@
 
 #include "devices.h"
 
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index cf38e22..44bf716 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -28,8 +28,8 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 140ddbb..8759ecf 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index 232f97a..bafabb5 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -180,6 +180,9 @@
 			__asmeq("%1", "r0")
 			__asmeq("%2", "r1")
 			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0)
 			: "r" (r0), "r" (r1), "r" (r2)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 2aacf41..4cb2769 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1281,9 +1281,9 @@
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1634,6 +1634,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
 				   unsigned long *ckih1, unsigned long *ckih2)
 {
@@ -1671,3 +1672,4 @@
 	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
 	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
 }
+#endif
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 5c53282..5e2e7a8 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int mx5_cpu_rev = -1;
 
@@ -67,7 +67,8 @@
 	if (!cpu_is_mx51())
 		return 0;
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 26eacc9..df4a508f2 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -23,7 +23,9 @@
 
 static void imx5_idle(void)
 {
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (!need_resched())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	local_irq_enable();
 }
 
 /*
@@ -89,7 +91,7 @@
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
+	pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index b004e17..ec6ca91 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -565,7 +565,7 @@
 };
 
 static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+	.flags = MC13XXX_USE_RTC,
 	.regulators = {
 		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
 		.regulators = mx51_efika_regulators,
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 229ae34..da6e4aa 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -404,7 +404,7 @@
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index ac2316d..064ec5a 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -471,7 +471,8 @@
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+	else
+		mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
 	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc1-slot-power");
@@ -480,7 +481,6 @@
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index f009b54..e4cfb7e 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a0281..73f287d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@
 comment "OMAP CPU Speed"
 	depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-	bool "OMAP clocks set by bootloader"
-	depends on ARCH_OMAP1
-	help
-	  Enable this option to prevent the kernel from overriding the clock
-	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-	  internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
 	bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1f1db76..b0f15d2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -19,6 +19,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/export.h>
 
 #include <media/soc_camera.h>
 
@@ -301,8 +302,6 @@
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
 	omap_board_config = ams_delta_config;
 	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
@@ -372,10 +371,16 @@
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c6fe61d..4206157 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -42,7 +42,6 @@
 #include <plat/irda.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
-#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 667a7cb..092a4c0 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/i2c.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 2a6545b..61ed6cd 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -25,6 +25,7 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/smc91x.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <mach/system.h>
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09ef..16b1423 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9..1297bb5 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -767,6 +767,15 @@
 	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
@@ -835,9 +844,12 @@
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
 	 */
 	{
 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +874,10 @@
 			}
 		}
 	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
-#endif
 	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+	omap1_show_rates();
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +922,21 @@
 
 	return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+		return;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef988..475cb2f 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -30,6 +30,8 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@
 		return -ENODEV;
 
 	omap_sram_init();
+	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index c0e1f48..e962926 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -9,6 +9,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 495b398..89ea20c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -116,7 +116,7 @@
 		return;
 	}
 
-#ifdef CONFIG_OMAP_MPU_TIMER
+#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
 #else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 497e9dc..e1293aa 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,7 +14,6 @@
 	select SERIAL_OMAP_CONSOLE
 	select I2C
 	select I2C_OMAP
-	select MFD_SUPPORT
 	select MENELAUS if ARCH_OMAP2
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
@@ -335,6 +334,7 @@
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
+	select ARM_AMBA
 	select OC_ETM
 	help
 	  Say Y here to enable debugging hardware of omap3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69ab1c0..b009f17 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o
+	 common.o gpio.o dma.o wd_timer.o display.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -264,7 +264,4 @@
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 
-disp-$(CONFIG_OMAP2_DSS)		:= display.o
-obj-y					+= $(disp-m) $(disp-y)
-
 obj-y					+= common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 4291894..90154e4 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -226,7 +226,6 @@
 {
 	int ret;
 
-	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 0cc9094..fb55fa3d 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -28,6 +28,7 @@
  * XXX: Still needed to boot until the i2c & twl driver is adapted to
  * device-tree
  */
+#ifdef CONFIG_ARCH_OMAP4
 static struct twl4030_platform_data sdp4430_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -37,7 +38,9 @@
 {
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP3
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -47,6 +50,7 @@
 {
 	omap3_pmic_init("twl4030", &beagle_twldata);
 }
+#endif
 
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
@@ -72,17 +76,21 @@
 	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
+#ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_init(void)
 {
 	omap4_i2c_init();
 	omap_generic_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP3
 static void __init omap3_init(void)
 {
 	omap3_i2c_init();
 	omap_generic_init();
 }
+#endif
 
 #if defined(CONFIG_SOC_OMAP2420)
 static const char *omap242x_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c12666e..8b351d9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,7 +35,6 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/keypad.h>
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@@ -50,10 +50,8 @@
 
 #define H4_ETHR_GPIO_IRQ		92
 
-static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
-static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-
-static const unsigned int h4_keymap[] = {
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t board_matrix_keys[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(1, 0, KEY_RIGHT),
 	KEY(2, 0, KEY_A),
@@ -86,6 +84,71 @@
 	KEY(4, 5, KEY_ENTER),
 };
 
+static const struct matrix_keymap_data board_keymap_data = {
+	.keymap			= board_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(board_matrix_keys),
+};
+
+static unsigned int board_keypad_row_gpios[] = {
+	88, 89, 124, 11, 6, 96
+};
+
+static unsigned int board_keypad_col_gpios[] = {
+	90, 91, 100, 36, 12, 97, 98
+};
+
+static struct matrix_keypad_platform_data board_keypad_platform_data = {
+	.keymap_data	= &board_keymap_data,
+	.row_gpios	= board_keypad_row_gpios,
+	.num_row_gpios	= ARRAY_SIZE(board_keypad_row_gpios),
+	.col_gpios	= board_keypad_col_gpios,
+	.num_col_gpios	= ARRAY_SIZE(board_keypad_col_gpios),
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device board_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &board_keypad_platform_data,
+	},
+};
+static void __init board_mkp_init(void)
+{
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
+		board_keypad_row_gpios[5] = 0;
+		board_keypad_col_gpios[2] = 15;
+		board_keypad_col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
+	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
+
+	platform_device_register(&board_keyboard);
+}
+#else
+static inline void board_mkp_init(void)
+{
+}
+#endif
+
 static struct mtd_partition h4_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -137,31 +200,8 @@
 	.resource	= &h4_flash_resource,
 };
 
-static const struct matrix_keymap_data h4_keymap_data = {
-	.keymap		= h4_keymap,
-	.keymap_size	= ARRAY_SIZE(h4_keymap),
-};
-
-static struct omap_kp_platform_data h4_kp_data = {
-	.rows		= 6,
-	.cols		= 7,
-	.keymap_data	= &h4_keymap_data,
-	.rep		= true,
-	.row_gpios 	= row_gpios,
-	.col_gpios 	= col_gpios,
-};
-
-static struct platform_device h4_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h4_kp_data,
-	},
-};
-
 static struct platform_device *h4_devices[] __initdata = {
 	&h4_flash_device,
-	&h4_kp_device,
 };
 
 static struct panel_generic_dpi_data h4_panel_data = {
@@ -336,31 +376,7 @@
 	 * if not needed.
 	 */
 
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
-	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-	if (omap_has_menelaus()) {
-		omap_mux_init_signal("sdrc_a14.gpio0",
-			OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-		omap_mux_init_signal("gpio_98", 0);
-		row_gpios[5] = 0;
-		col_gpios[2] = 15;
-		col_gpios[6] = 18;
-	} else {
-		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("gpio_100", 0);
-		omap_mux_init_signal("gpio_98", 0);
-	}
-	omap_mux_init_signal("gpio_90", 0);
-	omap_mux_init_signal("gpio_91", 0);
-	omap_mux_init_signal("gpio_36", 0);
-	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-	omap_mux_init_signal("gpio_97", 0);
-#endif
-
+	board_mkp_init();
 	i2c_register_board_info(1, h4_i2c_board_info,
 			ARRAY_SIZE(h4_i2c_board_info));
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 70261bc..4a71cb7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -378,7 +378,8 @@
 static int __init omap3_beagle_i2c_init(void)
 {
 	omap3_pmic_get_config(&beagle_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
 			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
 
 	beagle_twldata.vpll2->constraints.name = "VDVI";
@@ -444,9 +445,15 @@
 	},
 };
 
+static struct platform_device madc_hwmon = {
+	.name	= "twl4030_madc_hwmon",
+	.id	= -1,
+};
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
+	&madc_hwmon,
 };
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 2d24e28..ec00b2e 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -34,6 +34,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/export.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index bcffee0..e069a9b 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -46,10 +46,19 @@
 					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
 
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN		750000
-#define DPLL_FINT_BAND1_MAX		2100000
-#define DPLL_FINT_BAND2_MIN		7500000
-#define DPLL_FINT_BAND2_MAX		21000000
+#define OMAP3430_DPLL_FINT_BAND1_MIN	750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN	7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX	21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN	500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX	2500000
+#define OMAP3PLUS_DPLL_FINT_MIN		32000
+#define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
 /* _dpll_test_fint() return codes */
 #define DPLL_FINT_UNDERFLOW		-1
@@ -71,33 +80,43 @@
 static int _dpll_test_fint(struct clk *clk, u8 n)
 {
 	struct dpll_data *dd;
-	long fint;
+	long fint, fint_min, fint_max;
 	int ret = 0;
 
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
 	fint = clk->parent->rate / n;
-	if (fint < DPLL_FINT_BAND1_MIN) {
 
+	if (cpu_is_omap24xx()) {
+		/* Should not be called for OMAP2, so warn if it is called */
+		WARN(1, "No fint limits available for OMAP2!\n");
+		return DPLL_FINT_INVALID;
+	} else if (cpu_is_omap3430()) {
+		fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+		fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+	} else if (dd->flags & DPLL_J_TYPE) {
+		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+		fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+	} else {
+		fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+		fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+	}
+
+	if (fint < fint_min) {
 		pr_debug("rejecting n=%d due to Fint failure, "
 			 "lowering max_divider\n", n);
 		dd->max_divider = n;
 		ret = DPLL_FINT_UNDERFLOW;
-
-	} else if (fint > DPLL_FINT_BAND1_MAX &&
-		   fint < DPLL_FINT_BAND2_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-
-	} else if (fint > DPLL_FINT_BAND2_MAX) {
-
+	} else if (fint > fint_max) {
 		pr_debug("rejecting n=%d due to Fint failure, "
 			 "boosting min_divider\n", n);
 		dd->min_divider = n;
 		ret = DPLL_FINT_INVALID;
-
+	} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
+		   fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 48ac568..2311bc2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -66,6 +66,8 @@
 int omap4_dpllmx_gatectrl_read(struct clk *clk);
 void omap4_dpllmx_allow_gatectrl(struct clk *clk);
 void omap4_dpllmx_deny_gatectrl(struct clk *clk);
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 14a6277..61ad385 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,18 +1898,6 @@
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_242X),
-	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_242X),
-	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_242X),
-	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_242X),
-	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_242X),
-	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_242X),
-	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_242X),
-	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_242X),
-	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_242X),
-	CLK("omap_timer.10",	"fck",	&gpt10_fck,	CK_242X),
-	CLK("omap_timer.11",	"fck",	&gpt11_fck,	CK_242X),
-	CLK("omap_timer.12",	"fck",	&gpt12_fck,	CK_242X),
 	CLK("omap_timer.1",	"32k_ck",	&func_32k_ck,	CK_243X),
 	CLK("omap_timer.2",	"32k_ck",	&func_32k_ck,	CK_243X),
 	CLK("omap_timer.3",	"32k_ck",	&func_32k_ck,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index ea6717c..0cc1287 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,18 +1998,6 @@
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
-	CLK("omap_timer.1",     "fck",  &gpt1_fck,      CK_243X),
-	CLK("omap_timer.2",     "fck",  &gpt2_fck,      CK_243X),
-	CLK("omap_timer.3",     "fck",  &gpt3_fck,      CK_243X),
-	CLK("omap_timer.4",     "fck",  &gpt4_fck,      CK_243X),
-	CLK("omap_timer.5",     "fck",  &gpt5_fck,      CK_243X),
-	CLK("omap_timer.6",     "fck",  &gpt6_fck,      CK_243X),
-	CLK("omap_timer.7",     "fck",  &gpt7_fck,      CK_243X),
-	CLK("omap_timer.8",     "fck",  &gpt8_fck,      CK_243X),
-	CLK("omap_timer.9",     "fck",  &gpt9_fck,      CK_243X),
-	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_243X),
-	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_243X),
-	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_243X),
 	CLK("omap_timer.1",	"32k_ck",  &func_32k_ck,   CK_243X),
 	CLK("omap_timer.2",	"32k_ck",  &func_32k_ck,   CK_243X),
 	CLK("omap_timer.3",	"32k_ck",  &func_32k_ck,   CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 65dd363..5d0064a 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,18 +3464,6 @@
 	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
 	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
-	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_3XXX),
-	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_3XXX),
-	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_3XXX),
-	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_3XXX),
-	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_3XXX),
-	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_3XXX),
-	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_3XXX),
-	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_3XXX),
-	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_3XXX),
-	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_3XXX),
-	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_3XXX),
-	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_3XXX),
 	CLK("omap_timer.1",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK("omap_timer.2",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK("omap_timer.3",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
index 7ceb870..287a46f 100644
--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -8,6 +8,13 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 
+/*
+ * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
+ *    set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
+ *    vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
+ */
+#define OMAP4430_REGM4XEN_MULT	4
+
 int omap4xxx_clk_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 946bf04..0798a80 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -270,8 +270,8 @@
 	.dpll_data	= &dpll_abe_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
+	.recalc		= &omap4_dpll_regm4xen_recalc,
+	.round_rate	= &omap4_dpll_regm4xen_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 };
 
@@ -1195,11 +1195,25 @@
 	.recalc		= &omap2_clksel_recalc,
 };
 
+static const struct clksel_rate div2_2to1_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel ocp_abe_iclk_div[] = {
+	{ .parent = &aess_fclk, .rates = div2_2to1_rates },
+	{ .parent = NULL },
+};
+
 static struct clk ocp_abe_iclk = {
 	.name		= "ocp_abe_iclk",
 	.parent		= &aess_fclk,
+	.clksel		= ocp_abe_iclk_div,
+	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk per_abe_24m_fclk = {
@@ -1398,9 +1412,9 @@
 };
 
 static const struct clksel_rate div3_8to32_rates[] = {
-	{ .div = 8, .val = 0, .flags = RATE_IN_44XX },
-	{ .div = 16, .val = 1, .flags = RATE_IN_44XX },
-	{ .div = 32, .val = 2, .flags = RATE_IN_44XX },
+	{ .div = 8, .val = 0, .flags = RATE_IN_4460 },
+	{ .div = 16, .val = 1, .flags = RATE_IN_4460 },
+	{ .div = 32, .val = 2, .flags = RATE_IN_4460 },
 	{ .div = 0 },
 };
 
@@ -3363,17 +3377,6 @@
 	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_timer.1",	"fck",			&timer1_fck,	CK_443X),
-	CLK("omap_timer.2",	"fck",			&timer2_fck,	CK_443X),
-	CLK("omap_timer.3",	"fck",			&timer3_fck,	CK_443X),
-	CLK("omap_timer.4",	"fck",			&timer4_fck,	CK_443X),
-	CLK("omap_timer.5",	"fck",			&timer5_fck,	CK_443X),
-	CLK("omap_timer.6",	"fck",			&timer6_fck,	CK_443X),
-	CLK("omap_timer.7",	"fck",			&timer7_fck,	CK_443X),
-	CLK("omap_timer.8",	"fck",			&timer8_fck,	CK_443X),
-	CLK("omap_timer.9",	"fck",			&timer9_fck,	CK_443X),
-	CLK("omap_timer.10",	"fck",			&timer10_fck,	CK_443X),
-	CLK("omap_timer.11",	"fck",			&timer11_fck,	CK_443X),
 	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
 	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
 	CLK("omap_timer.3",	"32k_ck",	&sys_32k_ck,	CK_443X),
@@ -3403,12 +3406,12 @@
 	struct omap_clk *c;
 	u32 cpu_clkflg;
 
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
 		cpu_clkflg = CK_443X;
 	} else if (cpu_is_omap446x()) {
-		cpu_mask = RATE_IN_4460;
-		cpu_clkflg = CK_446X;
+		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
+		cpu_clkflg = CK_446X | CK_443X;
 	} else {
 		return 0;
 	}
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8480ee4..ad07689 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/limits.h>
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 4bf6e6e..942bb4f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -24,6 +24,7 @@
 
 #include <linux/sched.h>
 #include <linux/cpuidle.h>
+#include <linux/export.h>
 
 #include <plat/prcm.h>
 #include <plat/irqs.h>
@@ -88,17 +89,21 @@
 /**
  * omap3_enter_idle - Programs OMAP3 to enter the specified state
  * @dev: cpuidle device
- * @state: The target state to be programmed
+ * @drv: cpuidle driver
+ * @index: the index of state to be entered
  *
  * Called from the CPUidle framework to program the device to the
  * specified target state selected by the governor.
  */
 static int omap3_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+				int index)
 {
-	struct omap3_idle_statedata *cx = cpuidle_get_statedata(state);
+	struct omap3_idle_statedata *cx =
+			cpuidle_get_statedata(&dev->states_usage[index]);
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+	int idle_time;
 
 	/* Used to keep track of the total time in idle */
 	getnstimeofday(&ts_preidle);
@@ -113,7 +118,7 @@
 		goto return_sleep_time;
 
 	/* Deny idle for C1 */
-	if (state == &dev->states[0]) {
+	if (index == 0) {
 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
 		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
 	}
@@ -122,7 +127,7 @@
 	omap_sram_idle();
 
 	/* Re-allow idle for C1 */
-	if (state == &dev->states[0]) {
+	if (index == 0) {
 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
 		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
 	}
@@ -134,28 +139,38 @@
 	local_irq_enable();
 	local_fiq_enable();
 
-	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
+	idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \
+								USEC_PER_SEC;
+
+	/* Update cpuidle counters */
+	dev->last_residency = idle_time;
+
+	return index;
 }
 
 /**
  * next_valid_state - Find next valid C-state
  * @dev: cpuidle device
- * @state: Currently selected C-state
+ * @drv: cpuidle driver
+ * @index: Index of currently selected c-state
  *
- * If the current state is valid, it is returned back to the caller.
- * Else, this function searches for a lower c-state which is still
- * valid.
+ * If the state corresponding to index is valid, index is returned back
+ * to the caller. Else, this function searches for a lower c-state which is
+ * still valid (as defined in omap3_power_states[]) and returns its index.
  *
  * A state is valid if the 'valid' field is enabled and
  * if it satisfies the enable_off_mode condition.
  */
-static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
-					      struct cpuidle_state *curr)
+static int next_valid_state(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+				int index)
 {
-	struct cpuidle_state *next = NULL;
-	struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr);
+	struct cpuidle_state_usage *curr_usage = &dev->states_usage[index];
+	struct cpuidle_state *curr = &drv->states[index];
+	struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage);
 	u32 mpu_deepest_state = PWRDM_POWER_RET;
 	u32 core_deepest_state = PWRDM_POWER_RET;
+	int next_index = -1;
 
 	if (enable_off_mode) {
 		mpu_deepest_state = PWRDM_POWER_OFF;
@@ -172,20 +187,20 @@
 	if ((cx->valid) &&
 	    (cx->mpu_state >= mpu_deepest_state) &&
 	    (cx->core_state >= core_deepest_state)) {
-		return curr;
+		return index;
 	} else {
 		int idx = OMAP3_NUM_STATES - 1;
 
 		/* Reach the current state starting at highest C-state */
 		for (; idx >= 0; idx--) {
-			if (&dev->states[idx] == curr) {
-				next = &dev->states[idx];
+			if (&drv->states[idx] == curr) {
+				next_index = idx;
 				break;
 			}
 		}
 
 		/* Should never hit this condition */
-		WARN_ON(next == NULL);
+		WARN_ON(next_index == -1);
 
 		/*
 		 * Drop to next valid state.
@@ -193,41 +208,44 @@
 		 */
 		idx--;
 		for (; idx >= 0; idx--) {
-			cx = cpuidle_get_statedata(&dev->states[idx]);
+			cx = cpuidle_get_statedata(&dev->states_usage[idx]);
 			if ((cx->valid) &&
 			    (cx->mpu_state >= mpu_deepest_state) &&
 			    (cx->core_state >= core_deepest_state)) {
-				next = &dev->states[idx];
+				next_index = idx;
 				break;
 			}
 		}
 		/*
 		 * C1 is always valid.
-		 * So, no need to check for 'next==NULL' outside this loop.
+		 * So, no need to check for 'next_index == -1' outside
+		 * this loop.
 		 */
 	}
 
-	return next;
+	return next_index;
 }
 
 /**
  * omap3_enter_idle_bm - Checks for any bus activity
  * @dev: cpuidle device
- * @state: The target state to be programmed
+ * @drv: cpuidle driver
+ * @index: array index of target state to be programmed
  *
  * This function checks for any pending activity and then programs
  * the device to the specified or a safer state.
  */
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
-			       struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+			       int index)
 {
-	struct cpuidle_state *new_state;
+	int new_state_idx;
 	u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
 	struct omap3_idle_statedata *cx;
 	int ret;
 
 	if (!omap3_can_sleep()) {
-		new_state = dev->safe_state;
+		new_state_idx = drv->safe_state_index;
 		goto select_state;
 	}
 
@@ -237,7 +255,7 @@
 	 */
 	cam_state = pwrdm_read_pwrst(cam_pd);
 	if (cam_state == PWRDM_POWER_ON) {
-		new_state = dev->safe_state;
+		new_state_idx = drv->safe_state_index;
 		goto select_state;
 	}
 
@@ -253,7 +271,7 @@
 	 * Prevent PER off if CORE is not in retention or off as this
 	 * would disable PER wakeups completely.
 	 */
-	cx = cpuidle_get_statedata(state);
+	cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	core_next_state = cx->core_state;
 	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
 	if ((per_next_state == PWRDM_POWER_OFF) &&
@@ -264,11 +282,10 @@
 	if (per_next_state != per_saved_state)
 		pwrdm_set_next_pwrst(per_pd, per_next_state);
 
-	new_state = next_valid_state(dev, state);
+	new_state_idx = next_valid_state(dev, drv, index);
 
 select_state:
-	dev->last_state = new_state;
-	ret = omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, drv, new_state_idx);
 
 	/* Restore original PER state if it was modified */
 	if (per_next_state != per_saved_state)
@@ -301,22 +318,31 @@
 	.owner = 	THIS_MODULE,
 };
 
-/* Helper to fill the C-state common data and register the driver_data */
-static inline struct omap3_idle_statedata *_fill_cstate(
-					struct cpuidle_device *dev,
+/* Helper to fill the C-state common data*/
+static inline void _fill_cstate(struct cpuidle_driver *drv,
 					int idx, const char *descr)
 {
-	struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
-	struct cpuidle_state *state = &dev->states[idx];
+	struct cpuidle_state *state = &drv->states[idx];
 
 	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
 	state->target_residency	= cpuidle_params_table[idx].target_residency;
 	state->flags		= CPUIDLE_FLAG_TIME_VALID;
 	state->enter		= omap3_enter_idle_bm;
-	cx->valid		= cpuidle_params_table[idx].valid;
 	sprintf(state->name, "C%d", idx + 1);
 	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
-	cpuidle_set_statedata(state, cx);
+
+}
+
+/* Helper to register the driver_data */
+static inline struct omap3_idle_statedata *_fill_cstate_usage(
+					struct cpuidle_device *dev,
+					int idx)
+{
+	struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
+
+	cx->valid		= cpuidle_params_table[idx].valid;
+	cpuidle_set_statedata(state_usage, cx);
 
 	return cx;
 }
@@ -330,6 +356,7 @@
 int __init omap3_idle_init(void)
 {
 	struct cpuidle_device *dev;
+	struct cpuidle_driver *drv = &omap3_idle_driver;
 	struct omap3_idle_statedata *cx;
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
@@ -337,44 +364,52 @@
 	per_pd = pwrdm_lookup("per_pwrdm");
 	cam_pd = pwrdm_lookup("cam_pwrdm");
 
-	cpuidle_register_driver(&omap3_idle_driver);
+
+	drv->safe_state_index = -1;
 	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
 
 	/* C1 . MPU WFI + Core active */
-	cx = _fill_cstate(dev, 0, "MPU ON + CORE ON");
-	(&dev->states[0])->enter = omap3_enter_idle;
-	dev->safe_state = &dev->states[0];
+	_fill_cstate(drv, 0, "MPU ON + CORE ON");
+	(&drv->states[0])->enter = omap3_enter_idle;
+	drv->safe_state_index = 0;
+	cx = _fill_cstate_usage(dev, 0);
 	cx->valid = 1;	/* C1 is always valid */
 	cx->mpu_state = PWRDM_POWER_ON;
 	cx->core_state = PWRDM_POWER_ON;
 
 	/* C2 . MPU WFI + Core inactive */
-	cx = _fill_cstate(dev, 1, "MPU ON + CORE ON");
+	_fill_cstate(drv, 1, "MPU ON + CORE ON");
+	cx = _fill_cstate_usage(dev, 1);
 	cx->mpu_state = PWRDM_POWER_ON;
 	cx->core_state = PWRDM_POWER_ON;
 
 	/* C3 . MPU CSWR + Core inactive */
-	cx = _fill_cstate(dev, 2, "MPU RET + CORE ON");
+	_fill_cstate(drv, 2, "MPU RET + CORE ON");
+	cx = _fill_cstate_usage(dev, 2);
 	cx->mpu_state = PWRDM_POWER_RET;
 	cx->core_state = PWRDM_POWER_ON;
 
 	/* C4 . MPU OFF + Core inactive */
-	cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON");
+	_fill_cstate(drv, 3, "MPU OFF + CORE ON");
+	cx = _fill_cstate_usage(dev, 3);
 	cx->mpu_state = PWRDM_POWER_OFF;
 	cx->core_state = PWRDM_POWER_ON;
 
 	/* C5 . MPU RET + Core RET */
-	cx = _fill_cstate(dev, 4, "MPU RET + CORE RET");
+	_fill_cstate(drv, 4, "MPU RET + CORE RET");
+	cx = _fill_cstate_usage(dev, 4);
 	cx->mpu_state = PWRDM_POWER_RET;
 	cx->core_state = PWRDM_POWER_RET;
 
 	/* C6 . MPU OFF + Core RET */
-	cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET");
+	_fill_cstate(drv, 5, "MPU OFF + CORE RET");
+	cx = _fill_cstate_usage(dev, 5);
 	cx->mpu_state = PWRDM_POWER_OFF;
 	cx->core_state = PWRDM_POWER_RET;
 
 	/* C7 . MPU OFF + Core OFF */
-	cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF");
+	_fill_cstate(drv, 6, "MPU OFF + CORE OFF");
+	cx = _fill_cstate_usage(dev, 6);
 	/*
 	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
 	 * enable OFF mode in a stable form for previous revisions.
@@ -388,6 +423,9 @@
 	cx->mpu_state = PWRDM_POWER_OFF;
 	cx->core_state = PWRDM_POWER_OFF;
 
+	drv->state_count = OMAP3_NUM_STATES;
+	cpuidle_register_driver(&omap3_idle_driver);
+
 	dev->state_count = OMAP3_NUM_STATES;
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 68ec031..c15cfad 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -318,18 +318,10 @@
 #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
 		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
 
-static struct omap_device_pm_latency omap_mcpdm_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void omap_init_mcpdm(void)
 {
 	struct omap_hwmod *oh;
-	struct omap_device *od;
+	struct platform_device *pdev;
 
 	oh = omap_hwmod_lookup("mcpdm");
 	if (!oh) {
@@ -337,11 +329,8 @@
 		return;
 	}
 
-	od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
-				omap_mcpdm_latency,
-				ARRAY_SIZE(omap_mcpdm_latency), 0);
-	if (IS_ERR(od))
-		printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
 }
 #else
 static inline void omap_init_mcpdm(void) {}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 4036821..dce9905 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -15,6 +15,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -26,8 +27,35 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/common.h>
 
 #include "control.h"
+#include "display.h"
+
+#define DISPC_CONTROL		0x0040
+#define DISPC_CONTROL2		0x0238
+#define DISPC_IRQSTATUS		0x0018
+
+#define DSS_SYSCONFIG		0x10
+#define DSS_SYSSTATUS		0x14
+#define DSS_CONTROL		0x40
+#define DSS_SDI_CONTROL		0x44
+#define DSS_PLL_CONTROL		0x48
+
+#define LCD_EN_MASK		(0x1 << 0)
+#define DIGIT_EN_MASK		(0x1 << 1)
+
+#define FRAMEDONE_IRQ_SHIFT	0
+#define EVSYNC_EVEN_IRQ_SHIFT	2
+#define EVSYNC_ODD_IRQ_SHIFT	3
+#define FRAMEDONE2_IRQ_SHIFT	22
+#define FRAMEDONETV_IRQ_SHIFT	24
+
+/*
+ * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
+ *     reset before deciding that something has gone wrong
+ */
+#define FRAMEDONE_IRQ_TIMEOUT		100
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -171,3 +199,135 @@
 
 	return r;
 }
+
+static void dispc_disable_outputs(void)
+{
+	u32 v, irq_mask = 0;
+	bool lcd_en, digit_en, lcd2_en = false;
+	int i;
+	struct omap_dss_dispc_dev_attr *da;
+	struct omap_hwmod *oh;
+
+	oh = omap_hwmod_lookup("dss_dispc");
+	if (!oh) {
+		WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
+		return;
+	}
+
+	if (!oh->dev_attr) {
+		pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
+		return;
+	}
+
+	da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
+
+	/* store value of LCDENABLE and DIGITENABLE bits */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	lcd_en = v & LCD_EN_MASK;
+	digit_en = v & DIGIT_EN_MASK;
+
+	/* store value of LCDENABLE for LCD2 */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		lcd2_en = v & LCD_EN_MASK;
+	}
+
+	if (!(lcd_en | digit_en | lcd2_en))
+		return; /* no managers currently enabled */
+
+	/*
+	 * If any manager was enabled, we need to disable it before
+	 * DSS clocks are disabled or DISPC module is reset
+	 */
+	if (lcd_en)
+		irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
+
+	if (digit_en) {
+		if (da->has_framedonetv_irq) {
+			irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
+		} else {
+			irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
+				1 << EVSYNC_ODD_IRQ_SHIFT;
+		}
+	}
+
+	if (lcd2_en)
+		irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
+
+	/*
+	 * clear any previous FRAMEDONE, FRAMEDONETV,
+	 * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
+	 */
+	omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
+
+	/* disable LCD and TV managers */
+	v = omap_hwmod_read(oh, DISPC_CONTROL);
+	v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
+	omap_hwmod_write(v, oh, DISPC_CONTROL);
+
+	/* disable LCD2 manager */
+	if (da->manager_count > 2) {
+		v = omap_hwmod_read(oh, DISPC_CONTROL2);
+		v &= ~LCD_EN_MASK;
+		omap_hwmod_write(v, oh, DISPC_CONTROL2);
+	}
+
+	i = 0;
+	while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
+	       irq_mask) {
+		i++;
+		if (i > FRAMEDONE_IRQ_TIMEOUT) {
+			pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
+			break;
+		}
+		mdelay(1);
+	}
+}
+
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+int omap_dss_reset(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int c = 0;
+	int i, r;
+
+	if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
+		pr_err("dss_core: hwmod data doesn't contain reset data\n");
+		return -EINVAL;
+	}
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_enable(oc->_clk);
+
+	dispc_disable_outputs();
+
+	/* clear SDI registers */
+	if (cpu_is_omap3430()) {
+		omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
+		omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
+	}
+
+	/*
+	 * clear DSS_CONTROL register to switch DSS clock sources to
+	 * PRCM clock, if any
+	 */
+	omap_hwmod_write(0x0, oh, DSS_CONTROL);
+
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+				& SYSS_RESETDONE_MASK),
+			MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("dss_core: waiting for reset to finish failed\n");
+	else
+		pr_debug("dss_core: softreset done\n");
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk)
+			clk_disable(oc->_clk);
+
+	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+	return r;
+}
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
new file mode 100644
index 0000000..b871b017
--- /dev/null
+++ b/arch/arm/mach-omap2/display.h
@@ -0,0 +1,29 @@
+/*
+ * display.h - OMAP2+ integration-specific DSS header
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
+
+#include <linux/kernel.h>
+
+struct omap_dss_dispc_dev_attr {
+	u8	manager_count;
+	bool	has_framedonetv_irq;
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index f77022b..fc56745 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -390,7 +390,8 @@
 	 * propagating?
 	 */
 	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
+		clk->rate = (clk->recalc) ? clk->recalc(clk) :
+			omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -424,6 +425,7 @@
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
+	unsigned long hw_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -435,7 +437,8 @@
 	if (!dd)
 		return -EINVAL;
 
-	if (rate == omap2_get_dpll_rate(clk))
+	hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
+	if (rate == hw_rate)
 		return 0;
 
 	/*
@@ -455,7 +458,7 @@
 			new_parent = dd->clk_bypass;
 	} else {
 		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
+			rate = clk->round_rate(clk, rate);
 
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 4e4da61..9c6a296 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -19,6 +19,7 @@
 #include <plat/clock.h>
 
 #include "clock.h"
+#include "clock44xx.h"
 #include "cm-regbits-44xx.h"
 
 /* Supported only on OMAP4 */
@@ -82,3 +83,71 @@
 	.deny_idle	= omap4_dpllmx_deny_gatectrl,
 };
 
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+{
+	u32 v;
+	unsigned long rate;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return 0;
+
+	dd = clk->dpll_data;
+
+	rate = omap2_get_dpll_rate(clk);
+
+	/* regm4xen adds a multiplier of 4 to DPLL calculations */
+	v = __raw_readl(dd->control_reg);
+	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+		rate *= OMAP4430_REGM4XEN_MULT;
+
+	return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate.  Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	u32 v;
+	struct dpll_data *dd;
+	long r;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	/* regm4xen adds a multiplier of 4 to DPLL calculations */
+	v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
+
+	if (v)
+		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+
+	r = omap2_dpll_round_rate(clk, target_rate);
+	if (r == ~0)
+		return r;
+
+	if (v)
+		clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+
+	return clk->dpll_data->last_rounded_rate;
+}
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 911cd2e..74f18f2 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -18,6 +18,7 @@
  * of the OMAP PM core code.
  */
 
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index d776ded..5cdce10 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/onenand_regs.h>
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 7708584..f4a1020 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -129,15 +129,11 @@
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
 	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
 	 */
 	reg = omap4_ctrl_pad_readl(control_pbias_offset);
 	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-		OMAP4_MMC1_PWRDNZ_MASK);
+		OMAP4_MMC1_PWRDNZ_MASK |
+		OMAP4_MMC1_PBIASLITE_VMODE_MASK);
 	omap4_ctrl_pad_writel(reg, control_pbias_offset);
 }
 
@@ -172,12 +168,6 @@
 			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
 			omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		}
-	} else {
-		reg = omap4_ctrl_pad_readl(control_pbias_offset);
-		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_MMC1_PBIASLITE_VMODE_MASK);
-		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 	}
 }
 
@@ -489,7 +479,7 @@
 			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK);
 		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK |
 			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK);
-		reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK|
+		reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK |
 			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK |
 			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK);
 		omap4_ctrl_pad_writel(reg, control_mmc1);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 36e2109..454dfce 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -19,10 +19,15 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/hwspinlock.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
+static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
+	.base_id = 0,
+};
+
 int __init hwspinlocks_init(void)
 {
 	int retval = 0;
@@ -40,7 +45,9 @@
 	if (oh == NULL)
 		return -EINVAL;
 
-	pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
+	pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
+				sizeof(struct hwspinlock_pdata),
+				NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		pr_err("Can't build omap_device for %s:%s\n", dev_name,
 								oh_name);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index d27daf9..7f47092 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -187,8 +187,11 @@
 	OMAP3_CHECK_FEATURE(status, ISP);
 	if (cpu_is_omap3630())
 		omap_features |= OMAP3_HAS_192MHZ_CLK;
-	if (!cpu_is_omap3505() && !cpu_is_omap3517())
+	if (cpu_is_omap3430() || cpu_is_omap3630())
 		omap_features |= OMAP3_HAS_IO_WAKEUP;
+	if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+	    omap_rev() == OMAP3430_REV_ES3_1_2)
+		omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
 
 	omap_features |= OMAP3_HAS_SDRC;
 
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
index c88420d..1e2d332 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
@@ -941,10 +941,10 @@
 #define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
 #define OMAP4_DSI1_LANEENABLE_SHIFT				24
 #define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT					19
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT					14
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
+#define OMAP4_DSI2_PIPD_SHIFT					19
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI1_PIPD_SHIFT					14
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 14)
 
 /* CONTROL_MCBSPLP */
 #define OMAP4_ALBCTRLRX_FSX_SHIFT				31
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a5d8dce..25d20ce 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -359,6 +359,7 @@
 	omap_pm_if_early_init();
 }
 
+#ifdef CONFIG_ARCH_OMAP2
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
@@ -382,11 +383,13 @@
 	omap_hwmod_init_postsetup();
 	omap2430_clk_init();
 }
+#endif
 
 /*
  * Currently only board-omap3beagle.c should call this because of the
  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
  */
+#ifdef CONFIG_ARCH_OMAP3
 void __init omap3_init_early(void)
 {
 	omap2_set_globals_3xxx();
@@ -430,7 +433,9 @@
 	omap_hwmod_init_postsetup();
 	omap3xxx_clk_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP4
 void __init omap4430_init_early(void)
 {
 	omap2_set_globals_443x();
@@ -442,6 +447,7 @@
 	omap_hwmod_init_postsetup();
 	omap4xxx_clk_init();
 }
+#endif
 
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-omap2/io.h
+++ /dev/null
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 86d564a..609ea2d 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index e61fead..b882204 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/platform_device.h>
 
 #include <plat/iommu.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d713807..207a2ff 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -749,7 +749,7 @@
 		ohii = &oh->mpu_irqs[i++];
 	} while (ohii->irq != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -772,7 +772,7 @@
 		ohdi = &oh->sdma_reqs[i++];
 	} while (ohdi->dma_req != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -795,7 +795,7 @@
 		mem = &os->addr[i++];
 	} while (mem->pa_start != mem->pa_end);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -2625,7 +2625,7 @@
  * Returns the context loss count of the powerdomain assocated with @oh
  * upon success, or zero if no powerdomain exists for @oh.
  */
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
 {
 	struct powerdomain *pwrdm;
 	int ret = 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 6d72062..a5409ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -875,6 +875,10 @@
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -899,7 +903,7 @@
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
 	.masters	= omap2420_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -939,6 +943,7 @@
 	.slaves		= omap2420_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -961,6 +966,10 @@
 	&omap2420_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -972,6 +981,8 @@
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2420_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -981,7 +992,7 @@
 static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 	.master		= &omap2420_l4_core_hwmod,
 	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1001,7 +1012,7 @@
 static struct omap_hwmod omap2420_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a2580d0..c4f56cb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -942,6 +942,10 @@
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "tv_clk", .clk = "dss_54m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_fck" },
 };
@@ -966,7 +970,7 @@
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
 	.masters	= omap2430_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 /* l4_core -> dss_dispc */
@@ -1000,6 +1004,7 @@
 	.slaves		= omap2430_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /* l4_core -> dss_rfbi */
@@ -1016,6 +1021,10 @@
 	&omap2430_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1027,6 +1036,8 @@
 			.module_offs = CORE_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap2430_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1036,7 +1047,7 @@
 static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.master		= &omap2430_l4_core_hwmod,
 	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_54m_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
@@ -1050,7 +1061,7 @@
 static struct omap_hwmod omap2430_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_fck",
+	.main_clk	= "dss_54m_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c451729..c11273d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -11,6 +11,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 #include <plat/dma.h>
+#include <plat/common.h>
 
 #include <mach/irqs.h>
 
@@ -43,13 +44,15 @@
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
 struct omap_hwmod_class omap2_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap2_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 3008e16..7f8915a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1369,9 +1369,14 @@
 };
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "video_clk", .clk = "dss_96m_fck" },
+	/*
+	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+	 * driver does not use these clocks.
+	 */
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+	{ .role = "tv_clk", .clk = "dss_tv_fck" },
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
 };
 
 static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1394,11 +1399,12 @@
 	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
 	.masters	= omap3xxx_dss_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-	.flags		= HWMOD_NO_IDLEST,
+	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 };
 
 static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap2_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
@@ -1456,6 +1462,7 @@
 	.slaves		= omap3xxx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
+	.dev_attr	= &omap2_3_dss_dispc_dev_attr
 };
 
 /*
@@ -1486,6 +1493,7 @@
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_dsi1_hwmod,
+	.clk		= "dss_ick",
 	.addr		= omap3xxx_dss_dsi1_addrs,
 	.fw = {
 		.omap2 = {
@@ -1502,6 +1510,10 @@
 	&omap3xxx_l4_core__dss_dsi1,
 };
 
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
@@ -1514,6 +1526,8 @@
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_dsi1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
 	.slaves		= omap3xxx_dss_dsi1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1540,6 +1554,10 @@
 	&omap3xxx_l4_core__dss_rfbi,
 };
 
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+	{ .role = "ick", .clk = "dss_ick" },
+};
+
 static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
 	.name		= "dss_rfbi",
 	.class		= &omap2_rfbi_hwmod_class,
@@ -1551,6 +1569,8 @@
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_rfbi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
 	.slaves		= omap3xxx_dss_rfbi_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -1560,7 +1580,7 @@
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_tv_fck",
+	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
 	.fw = {
 		.omap2 = {
@@ -1578,10 +1598,15 @@
 	&omap3xxx_l4_core__dss_venc,
 };
 
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+	/* required only on OMAP3430 */
+	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
 static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
 	.name		= "dss_venc",
 	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss1_alwon_fck",
+	.main_clk	= "dss_tv_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1589,6 +1614,8 @@
 			.module_offs = OMAP3430_DSS_MOD,
 		},
 	},
+	.opt_clks	= dss_venc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 	.slaves		= omap3xxx_dss_venc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
 	.flags		= HWMOD_NO_IDLEST,
@@ -3159,7 +3186,6 @@
 	&omap3xxx_mmc2_hwmod,
 	&omap3xxx_mmc3_hwmod,
 	&omap3xxx_mpu_hwmod,
-	&omap3xxx_iva_hwmod,
 
 	&omap3xxx_timer1_hwmod,
 	&omap3xxx_timer2_hwmod,
@@ -3188,8 +3214,6 @@
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
 	&omap3xxx_i2c3_hwmod,
-	&omap34xx_sr1_hwmod,
-	&omap34xx_sr2_hwmod,
 
 	/* gpio class */
 	&omap3xxx_gpio1_hwmod,
@@ -3211,8 +3235,6 @@
 	&omap3xxx_mcbsp2_sidetone_hwmod,
 	&omap3xxx_mcbsp3_sidetone_hwmod,
 
-	/* mailbox class */
-	&omap3xxx_mailbox_hwmod,
 
 	/* mcspi class */
 	&omap34xx_mcspi1,
@@ -3225,31 +3247,39 @@
 
 /* 3430ES1-only hwmods */
 static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3430es1_dss_core_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 3430ES2+-only hwmods */
 static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 34xx-only hwmods (all ES revisions) */
 static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap34xx_sr1_hwmod,
 	&omap34xx_sr2_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 36xx-only hwmods (all ES revisions) */
 static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3xxx_uart4_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap36xx_sr1_hwmod,
 	&omap36xx_sr2_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
@@ -3267,7 +3297,7 @@
 
 	/* Register hwmods common to all OMAP3 */
 	r = omap_hwmod_register(omap3xxx_hwmods);
-	if (!r)
+	if (r < 0)
 		return r;
 
 	rev = omap_rev();
@@ -3292,7 +3322,7 @@
 	};
 
 	r = omap_hwmod_register(h);
-	if (!r)
+	if (r < 0)
 		return r;
 
 	/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7695e5d..daaf165 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,6 +30,7 @@
 #include <plat/mmc.h>
 #include <plat/i2c.h>
 #include <plat/dmtimer.h>
+#include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -1187,6 +1188,7 @@
 static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
 	.name	= "dss",
 	.sysc	= &omap44xx_dss_sysc,
+	.reset	= omap_dss_reset,
 };
 
 /* dss */
@@ -1240,12 +1242,12 @@
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "sys_clk", .clk = "dss_sys_clk" },
 	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "dss_clk", .clk = "dss_dss_clk" },
-	{ .role = "video_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
 };
 
 static struct omap_hwmod omap44xx_dss_hwmod = {
 	.name		= "dss_core",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.class		= &omap44xx_dss_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
 	.main_clk	= "dss_dss_clk",
@@ -1325,6 +1327,11 @@
 	{ }
 };
 
+static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
+	.manager_count		= 3,
+	.has_framedonetv_irq	= 1
+};
+
 /* l4_per -> dss_dispc */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -1340,12 +1347,6 @@
 	&omap44xx_l4_per__dss_dispc,
 };
 
-static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
 static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap44xx_dispc_hwmod_class,
@@ -1359,10 +1360,9 @@
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.opt_clks	= dss_dispc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
 	.slaves		= omap44xx_dss_dispc_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
+	.dev_attr	= &omap44xx_dss_dispc_dev_attr
 };
 
 /*
@@ -1624,7 +1624,7 @@
 	.clkdm_name	= "l3_dss_clkdm",
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_48mhz_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
@@ -1785,7 +1785,7 @@
 	.name		= "dss_venc",
 	.class		= &omap44xx_venc_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
+	.main_clk	= "dss_tv_clk",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index de832eb..51e5418 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -49,3 +49,7 @@
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
 };
 
+struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
+	.manager_count		= 2,
+	.has_framedonetv_irq	= 0
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 39a7c37..ad5d8f0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,8 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "display.h"
+
 /* Common address space across OMAP2xxx */
 extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
 extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
@@ -111,4 +113,6 @@
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
 
+extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
+
 #endif
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index c8b1bef..d15225f 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -20,6 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  * USA
  */
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
@@ -236,7 +237,7 @@
 static const struct of_device_id l3_noc_match[] = {
 	{.compatible = "ti,omap4-l3-noc", },
 	{},
-}
+};
 MODULE_DEVICE_TABLE(of, l3_noc_match);
 #else
 #define l3_noc_match NULL
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 2ab7a9e..00bff46 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/opp.h>
+#include <linux/export.h>
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
@@ -23,6 +24,7 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
+#include "twl-common.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -225,11 +227,8 @@
 
 static int __init omap2_common_pm_late_init(void)
 {
-	/* Init the OMAP TWL parameters */
-	omap3_twl_init();
-	omap4_twl_init();
-
 	/* Init the voltage layer */
+	omap_pmic_late_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c8cbd00..efa6649 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,31 +99,27 @@
 {
 	int timeout = 0;
 
-	if (omap_rev() >= OMAP3430_REV_ES3_1) {
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-		/* Do a readback to assure write has been done */
-		omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+	/* Do a readback to assure write has been done */
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
-			 OMAP3430_ST_IO_CHAIN_MASK)) {
-			timeout++;
-			if (timeout > 1000) {
-				printk(KERN_ERR "Wake up daisy chain "
-				       "activation failed.\n");
-				return;
-			}
-			omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKEN);
+	while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+		 OMAP3430_ST_IO_CHAIN_MASK)) {
+		timeout++;
+		if (timeout > 1000) {
+			pr_err("Wake up daisy chain activation failed.\n");
+			return;
 		}
+		omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+					   WKUP_MOD, PM_WKEN);
 	}
 }
 
 static void omap3_disable_io_chain(void)
 {
-	if (omap_rev() >= OMAP3430_REV_ES3_1)
-		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				       PM_WKEN);
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
 }
 
 static void omap3_core_save_context(void)
@@ -363,7 +359,6 @@
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
-	pwrdm_pre_transition();
 
 	/* NEON control */
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
@@ -376,7 +371,8 @@
 	    (per_next_state < PWRDM_POWER_ON ||
 	     core_next_state < PWRDM_POWER_ON)) {
 		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
-		omap3_enable_io_chain();
+		if (omap3_has_io_chain_ctrl())
+			omap3_enable_io_chain();
 	}
 
 	/* Block console output in case it is on one of the OMAP UARTs */
@@ -386,6 +382,8 @@
 			if (!console_trylock())
 				goto console_still_active;
 
+	pwrdm_pre_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
@@ -409,13 +407,14 @@
 	omap3_intc_prepare_idle();
 
 	/*
-	* On EMU/HS devices ROM code restores a SRDC value
-	* from scratchpad which has automatic self refresh on timeout
-	* of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
-	* Hence store/restore the SDRC_POWER register here.
-	*/
-	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	 * On EMU/HS devices ROM code restores a SRDC value
+	 * from scratchpad which has automatic self refresh on timeout
+	 * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
+	 * Hence store/restore the SDRC_POWER register here.
+	 */
+	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
@@ -432,8 +431,9 @@
 		omap34xx_do_sram_idle(save_state);
 
 	/* Restore normal SDRC POWER settings */
-	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
@@ -455,6 +455,8 @@
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
@@ -475,11 +477,10 @@
 	     core_next_state < PWRDM_POWER_ON)) {
 		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 					     PM_WKEN);
-		omap3_disable_io_chain();
+		if (omap3_has_io_chain_ctrl())
+			omap3_disable_io_chain();
 	}
 
-	pwrdm_post_transition();
-
 	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
@@ -870,6 +871,9 @@
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
+	if (!omap3_has_io_chain_ctrl())
+		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+
 	pm_errata_configure();
 
 	/* XXX prcm_setup_regs needs to be before enabling hw
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 5164d58..8a18d1b 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1002,16 +1002,16 @@
  * @pwrdm: struct powerdomain * to wait for
  *
  * Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter.  Returns 0
+ * logic off counter and the per-bank memory off counter.  Returns negative
  * (and WARNs) upon error, otherwise, returns the context loss count.
  */
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
 {
 	int i, count;
 
 	if (!pwrdm) {
 		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
-		return 0;
+		return -ENODEV;
 	}
 
 	count = pwrdm->state_counter[PWRDM_POWER_OFF];
@@ -1020,7 +1020,13 @@
 	for (i = 0; i < pwrdm->banks; i++)
 		count += pwrdm->ret_mem_off_counter[i];
 
-	pr_debug("powerdomain: %s: context loss count = %u\n",
+	/*
+	 * Context loss count has to be a non-negative value. Clear the sign
+	 * bit to get a value range from 0 to INT_MAX.
+	 */
+	count &= INT_MAX;
+
+	pr_debug("powerdomain: %s: context loss count = %d\n",
 		 pwrdm->name, count);
 
 	return count;
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 42e6dd8..0d72a8a 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -217,7 +217,7 @@
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
 bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
 
 extern void omap242x_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 8db5f03..597e2da 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -23,6 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include <mach/system.h>
 #include <plat/common.h>
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 0347b93..cf246b3 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -17,6 +17,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -138,7 +139,7 @@
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
 	} else if (sr_info->ip_type == SR_TYPE_V2) {
 		/* Read the status bits */
-		sr_read_reg(sr_info, IRQSTATUS);
+		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e49fc7b..037b0d7 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -408,14 +408,6 @@
 	return ret;
 }
 
-struct omap_device_pm_latency omap2_dmtimer_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 /**
  * omap_timer_init - build and register timer device with an
  * associated timer hwmod
@@ -477,9 +469,7 @@
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 #endif
 	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
-			omap2_dmtimer_latency,
-			ARRAY_SIZE(omap2_dmtimer_latency),
-			0);
+				 NULL, 0, 0);
 
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s: %s.\n",
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 52243577..10b20c6 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -30,6 +30,7 @@
 #include <plat/usb.h>
 
 #include "twl-common.h"
+#include "pm.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -48,6 +49,16 @@
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap_pmic_late_init(void)
+{
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
+}
+
 #if defined(CONFIG_ARCH_OMAP3)
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 5e83a5b..275dde8 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,6 +1,8 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
+#include <plat/irqs.h>
+
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
 #define TWL_COMMON_PDATA_MADC		(1 << 2)
@@ -30,6 +32,7 @@
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
 
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 47fb5d6..2679750 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,44 +60,6 @@
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
-{
-	switch (board_data->interface_type) {
-	case MUSB_INTERFACE_UTMI:
-		omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT);
-		omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT);
-		break;
-	case MUSB_INTERFACE_ULPI:
-		omap_mux_init_signal("usba0_ulpiphy_clk",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_stp",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dir",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_nxt",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat0",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat1",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat2",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat3",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat4",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat5",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat6",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat7",
-						OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	default:
-		break;
-	}
-}
-
 static struct omap_musb_board_data musb_default_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
 	.mode			= MUSB_OTG,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8dd26b7..994d8f5 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -8,11 +8,13 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/string.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 
 #include <linux/usb/musb.h>
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 64070ac..1f8fdf7 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6c75cd3..b35e200 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -275,7 +275,7 @@
 		.partitions		= ts78xx_ts_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
 		.chip_delay		= 15,
-		.options		= NAND_USE_FLASH_BBT,
+		.bbt_options		= NAND_BBT_USE_FLASH,
 	},
 	.ctrl	= {
 		/*
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
index 8f2c234..58d4ee3 100644
--- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 
 #define UART_SHIFT 2
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b854..4b81f59 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -307,7 +307,7 @@
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
 	if (cmd == PXA2XX_UDC_CMD_CONNECT)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3a7387f..e096bba 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -424,8 +424,9 @@
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
 	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.parts		= cm_x300_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
+	.num_cs		= 1,
+	.parts[0]	= cm_x300_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
 
 static void __init cm_x300_init_nand(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7db6646..05bfa1b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/moduleparam.h>
 #include <linux/kernel.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..d23b92b 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -146,7 +146,7 @@
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
 	.gpio_pullup		= -1,
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 3f9be41..2b8ca0d 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -139,8 +139,9 @@
 static struct pxa3xx_nand_platform_data colibri_nand_info = {
 	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.parts		= colibri_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
+	.num_cs		= 1,
+	.parts[0]	= colibri_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
 };
 
 void __init colibri_pxa3xx_init_nand(void)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3e9483b..549468d 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -32,6 +32,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/module.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8e697dd..d82b7aa 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -144,7 +144,7 @@
 	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
 };
 
-void eseries_register_clks(void)
+static void __init eseries_register_clks(void)
 {
 	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
index be92196..b96949d 100644
--- a/arch/arm/mach-pxa/eseries.h
+++ b/arch/arm/mach-pxa/eseries.h
@@ -11,5 +11,4 @@
 extern void eseries_get_tmio_gpios(void);
 extern struct resource eseries_tmio_resources[];
 extern struct platform_device e300_tc6387xb_device;
-extern void eseries_register_clks(void);
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c8208c..ffdd70d 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -106,7 +106,7 @@
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
 static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
index 576868f..41b4c93 100644
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -25,7 +25,7 @@
 #define GPIO_REGS_VIRT	io_p2v(0x40E00000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 /* GPIO Pin Level Registers */
 #define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index f80bbe2..d4eac3d 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -37,8 +37,8 @@
 #define palm27x_lcd_init(power, mode)	do {} while (0)
 #endif
 
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 extern void __init palm27x_udc_init(int vbus, int pullup,
 					int vbus_inverted);
 #else
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0037e57..7b324ec 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -325,8 +325,9 @@
 
 static struct pxa3xx_nand_platform_data littleton_nand_info = {
 	.enable_arbiter	= 1,
-	.parts		= littleton_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+	.num_cs		= 1,
+	.parts[0]	= littleton_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
 };
 
 static void __init littleton_init_nand(void)
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index b5a8fd3..90928d6 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -389,10 +389,11 @@
 };
 
 static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter = 1,
-	.keep_config = 1,
-	.parts = mxm_8x10_nand_partitions,
-	.nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.num_cs		= 1,
+	.parts[0]	= mxm_8x10_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
 };
 
 static void __init mxm_8x10_nand_init(void)
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 325c245..fbc10d7 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -164,8 +164,8 @@
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info palm27x_udc_info = {
 	.gpio_vbus_inverted	= 1,
 };
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ec7cae..2c24c67 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -338,7 +338,7 @@
 /******************************************************************************
  * UDC
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
 static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 9a9c539..6d38c65 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -394,9 +394,9 @@
 	}
 
 	if (flags & SOCAM_DATAWIDTH_8)
-		gpio_set_value(gpio_bus_switch, 1);
+		gpio_set_value_cansleep(gpio_bus_switch, 1);
 	else
-		gpio_set_value(gpio_bus_switch, 0);
+		gpio_set_value_cansleep(gpio_bus_switch, 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 948ce3e..50c8331 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -16,6 +16,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 #include <linux/pm.h>
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6810cdd..f0c05f4 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -346,8 +346,9 @@
 static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
 	.enable_arbiter	= 1,
 	.keep_config	= 1,
-	.parts		= raumfeld_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
+	.num_cs		= 1,
+	.parts[0]	= raumfeld_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
 };
 
 /**
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d8dec91..953a919 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -30,6 +30,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 35bbf13..1aaed2b 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
 #include <linux/fb.h>
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..ca0c661 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -343,7 +343,7 @@
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
 	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
 	.gpio_pullup		= -1,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 31d4968..6c39c33 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -366,8 +366,9 @@
 
 static struct pxa3xx_nand_platform_data zylonite_nand_info = {
 	.enable_arbiter	= 1,
-	.parts		= zylonite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+	.num_cs		= 1,
+	.parts[0]	= zylonite_nand_partitions,
+	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
 };
 
 static void __init zylonite_init_nand(void)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3700cf3..5261a7e 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,7 +6,6 @@
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index b2b2a5b..ae8e482 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <plat/dma.h>
 #include <linux/sysdev.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
@@ -51,6 +50,18 @@
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_has_circular(void)
+{
+	return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
+
+#include <plat/dma.h>
+
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
@@ -163,7 +174,7 @@
 	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
@@ -196,9 +207,4 @@
 
 typedef unsigned long dma_device_t;
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
index eee0654..a957bc8e 100644
--- a/arch/arm/mach-s3c2410/include/mach/fb.h
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -1,74 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <mach/regs-lcd.h>
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
+#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index bab1392..c53ad34 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 4f7bf32..019ea86 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -53,7 +53,7 @@
 #define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
 
 #if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
 #endif
 
 #define S3C2410_GPIO_NEXT(__gpio) \
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index d67819d..c410a07 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -17,11 +17,11 @@
 
 #include <mach/regs-gpio.h>
 
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
 {
-	struct s3c_gpio_chip *chip;
+	struct samsung_gpio_chip *chip;
 
 	if (pin > S3C_GPIO_END)
 		return NULL;
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index e5a68ea..e53b217 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -191,9 +191,9 @@
 #define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
 
 #ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
 #else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
 #endif
 
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 4cf495f..78ae807 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -149,6 +149,7 @@
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
 #define S3C24XX_PA_SDI      S3C2410_PA_SDI
 #define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 45eea52..2eef7e6 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -64,4 +64,4 @@
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 5e06c72..c3feff3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -65,6 +65,7 @@
 #define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
 #define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
 
+#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
 #define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
 #define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
 #define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
@@ -102,6 +103,7 @@
 #define S3C2443_PCLKCON_UART3		(1<<3)
 #define S3C2443_PCLKCON_IIC		(1<<4)
 #define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
 #define S3C2443_PCLKCON_ADC		(1<<7)
 #define S3C2443_PCLKCON_AC97		(1<<8)
 #define S3C2443_PCLKCON_IIS		(1<<9)
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 556c535..05a7d16 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -35,6 +35,7 @@
 #include <video/platform_lcd.h>
 
 #include <linux/mmc/host.h>
+#include <linux/export.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -696,9 +697,9 @@
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	gpio_request(S3C2410_GPC(0), "LCD power");
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 367d376..4518521 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -49,6 +49,7 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
+#include <mach/regs-lcd.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
 #include <plat/nand.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 343a540..3d7ebc5 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -72,8 +72,8 @@
 
 void __init s3c2410_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index c61e326..d2a7d5ef 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -130,11 +130,11 @@
 
 static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
 				  struct s3c24xx_dma_map *map,
-				  enum s3c2410_dmasrc dir)
+				  enum dma_data_direction dir)
 {
 	unsigned long chsel;
 
-	if (dir == S3C2410_DMASRC_HW)
+	if (dir == DMA_FROM_DEVICE)
 		chsel = map->channels_rx[0];
 	else
 		chsel = map->channels[0];
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 0000000..4526f6b
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+	unsigned long flags;
+	unsigned long slpcon;
+
+	offs *= 2;
+
+	if (pin < S3C2410_GPB(0))
+		return -EINVAL;
+
+	if (pin >= S3C2410_GPF(0) &&
+	    pin <= S3C2410_GPG(16))
+		return -EINVAL;
+
+	if (pin > S3C2410_GPH(16))
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	slpcon = __raw_readl(chip->base + 0x0C);
+
+	slpcon &= ~(3 << offs);
+	slpcon |= state << offs;
+
+	__raw_writel(slpcon, chip->base + 0x0C);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 69b48a7..84c7b03 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -13,7 +13,6 @@
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
-	select S3C_GPIO_PULL_UPDOWN
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
 	help
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81..afbbe8b 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -21,7 +21,6 @@
 #include <plat/cpu.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
 #include <plat/pll.h>
 
 #include <asm/mach/map.h>
@@ -29,6 +28,14 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-s3c2443-clock.h>
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
+*/
+
 static unsigned int armdiv[8] = {
 	[0] = 1,
 	[1] = 2,
@@ -38,6 +45,32 @@
 	[7] = 8,
 };
 
+static struct clksrc_clk hsspi_eplldiv = {
+	.clk = {
+		.name	= "hsspi-eplldiv",
+		.parent	= &clk_esysclk.clk,
+		.ctrlbit = (1 << 14),
+		.enable = s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+	[0] = &hsspi_eplldiv.clk,
+	[1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+	.clk	= {
+		.name	= "hsspi-if",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = hsspi_sources,
+		.nr_sources = ARRAY_SIZE(hsspi_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
@@ -100,20 +133,15 @@
 	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
 };
 
-static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
 void __init_or_cpufreq s3c2416_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_setup_clocks(s3c2416_get_pll);
 }
 
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsspi_eplldiv,
+	&hsspi_mux,
 	&hsmmc_div[0],
 	&hsmmc_div[1],
 	&hsmmc_mux[0],
@@ -131,7 +159,9 @@
 
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2416_CLKDIV0_ARMDIV_MASK);
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 20b3fdfb..ee214bc 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -60,6 +60,7 @@
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -97,6 +98,8 @@
 
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2416-adc");
+
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 #endif
@@ -120,8 +123,8 @@
 
 void __init s3c2416_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
 
 	/* initialize device information early */
 	s3c2416_default_sdhci0();
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
index ed34fad..cee5395 100644
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ b/arch/arm/mach-s3c2416/setup-sdhci.c
@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,30 +22,3 @@
 	[2] = "hsmmc-if",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index c461fb8..914e620 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,7 +5,6 @@
 config CPU_S3C2440
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select CPU_S3C244X
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 684dbb3..0d3453b 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -43,6 +43,7 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
 #include <mach/h1940.h>
 #include <mach/fb.h>
 
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 2270d33..37f8cc6 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -70,6 +70,6 @@
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 6f2b65e..2c822e0 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -182,6 +182,6 @@
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
 }
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index d8eb868..8814031 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,7 +10,6 @@
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
-	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 38058af..1c2c088 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -57,18 +57,14 @@
 
 /* clock selections */
 
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
  * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
 */
 
-/* armdiv divisor table */
-
 static unsigned int armdiv[16] = {
 	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
 	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
@@ -80,92 +76,6 @@
 	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
 };
 
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best)
-			best = div;
-	}
-
-	return parent / best;
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best) {
-			best = div;
-			val = ptr;
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -173,7 +83,7 @@
 
 static struct clksrc_clk clk_hsspi = {
 	.clk	= {
-		.name		= "hsspi",
+		.name		= "hsspi-if",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
 		.enable		= s3c2443_clkcon_enable_s,
@@ -235,48 +145,6 @@
 	},
 };
 
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
 /* standard clock definitions */
 
 static struct clk init_clocks_off[] = {
@@ -286,11 +154,6 @@
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
 	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
 		.name		= "spi",
 		.devname	= "s3c2410-spi.0",
 		.parent		= &clk_p,
@@ -305,27 +168,20 @@
 	}
 };
 
-static struct clk init_clocks[] = {
-};
-
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };
 
 static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
-	&clk_armdiv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll);
 }
 
 void __init s3c2443_init_clocks(int xtal)
@@ -336,7 +192,9 @@
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2443_CLKDIV0_ARMDIV_MASK);
 
 	s3c2443_setup_clocks();
 
@@ -345,10 +203,6 @@
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
-	/* register clocks from clock array */
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
 	 * their own DMA requests to the bus can cause the system to lockup
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index e6a28ba..a22b771 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
 #include <plat/cpu.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -70,6 +71,8 @@
 	s3c_nand_setname("s3c2412-nand");
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2443-adc");
+
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
@@ -90,8 +93,8 @@
 
 void __init s3c2443_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f057b6a..5552e04 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -288,5 +288,6 @@
 	select S3C_DEV_RTC
 	select S3C64XX_DEV_SPI
 	select S3C24XX_GPIO_EXTRA128
+	select I2C
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034..cfc0b99 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -13,7 +13,6 @@
 # Core files
 obj-y				+= cpu.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # Core support for S3C6400 system
 
@@ -55,12 +54,10 @@
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
 
 # device support
 
 obj-y				+= dev-uart.o
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S3C64XX_DEV_TS)	+= dev-ts.o
-obj-$(CONFIG_S3C64XX_DEV_ONENAND1)	+= dev-onenand1.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e3..39c238d 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -25,13 +25,13 @@
 
 #include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
-#include <mach/pll.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/pll.h>
 
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
@@ -735,7 +735,8 @@
 	/* For now assume the mux always selects the crystal */
 	clk_ext_xtal_mux.parent = xtal_clk;
 
-	epll = s3c6400_get_epll(xtal);
+	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
 
@@ -744,7 +745,13 @@
 	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 	       apll, mpll, epll);
 
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+		/* Synchronous mode */
+		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	else
+		/* Asynchronous mode */
+		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
 	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index c704783..de085b7 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -34,8 +34,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 /* table of supported CPUs */
 
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index cad6702..93470b1 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c
deleted file mode 100644
index 999f9e1..0000000
--- a/arch/arm/mach-s3c64xx/dev-onenand1.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
- *
- *  Copyright (c) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S3C64XX series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c64xx_onenand1_resources[] = {
-	[0] = {
-		.start	= S3C64XX_PA_ONENAND1,
-		.end	= S3C64XX_PA_ONENAND1 + 0x400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C64XX_PA_ONENAND1_BUF,
-		.end	= S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_ONENAND1,
-		.end	= IRQ_ONENAND1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
-	.name		= "samsung-onenand",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
-	.resource	= s3c64xx_onenand1_resources,
-};
-
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
-			 &s3c64xx_device_onenand1);
-}
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfaf..17d62f4 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -147,14 +147,14 @@
 	u32 control0, control1;
 
 	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@
 
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@
 	pr_debug("%s: peripheral %d\n", __func__, peripheral);
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 		break;
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 		break;
@@ -740,7 +740,7 @@
 	}
 
 	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
+	writel(0xffffff, S3C64XX_SDMA_SEL);
 
 	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
deleted file mode 100644
index 92b0908..0000000
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    samsung_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    samsung_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
new file mode 100644
index 0000000..be9074e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 0a5d926..fe1a98c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -58,11 +58,15 @@
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
 #include <plat/dma.h>
@@ -95,7 +99,7 @@
 	unsigned char		 peripheral;
 
 	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 
 
 	dma_addr_t		dev_addr;
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
deleted file mode 100644
index 5ef0bb6..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/pll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 38659be..fcf3dca 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -104,7 +104,7 @@
 	__raw_writel(0, S3C64XX_SLPEN);
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* turn on the sleep mode and keep it there, as it seems that during
 	 * suspend the xCON registers get re-set and thus you can end up with
diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
deleted file mode 100644
index b25bede..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9..b91e020 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -21,8 +21,11 @@
 #define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
 #define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
 
+#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
 #endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index d164a28..8eba88e 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -45,7 +45,7 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
new file mode 100644
index 0000000..f208154
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+
+static __devinitdata const struct {
+	u8 id;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+} gf_mods[] = {
+	{ .id = 0x01, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .name = "1253-EV1 Tomatin", },
+	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+					 const struct i2c_device_id *i2c_id)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id)
+			break;
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (!i2c_new_device(i2c->adapter,
+					    &(gf_mods[i].i2c_devs[j])))
+				dev_err(&i2c->dev,
+					"Failed to register dev: %d\n", ret);
+		}
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+			 id, rev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module",
+		.owner = THIS_MODULE,
+	},
+	.probe = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8065803..d04b654 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -43,13 +43,14 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/s3c6410.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
+#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@
 	.id		= -1,
 };
 
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
 	.name		= "speyside-wm8962",
 	.id		= -1,
@@ -295,6 +290,8 @@
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -342,6 +339,7 @@
 	&crag6410_backlight_device,
 	&speyside_device,
 	&speyside_wm8962_device,
+	&lowland_device,
 	&wallvdd_device,
 };
 
@@ -350,6 +348,12 @@
 	.irq_base	= 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+	.dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -365,6 +369,7 @@
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
 	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -500,6 +505,8 @@
 	.backup = &banff_backup_pdata,
 
 	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
 		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -557,8 +564,12 @@
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
 	REGULATOR_SUPPLY("CPVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -611,81 +622,16 @@
 	.disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
 	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
 };
 
 static void __init crag6410_map_io(void)
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 19a0887..952f75f 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -37,7 +37,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fb8969a..1bc85c3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -32,8 +32,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index c30f2e5..cb13cba 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -39,7 +39,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 93170d4..87281e4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,8 +33,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index cbb57de..94c831d 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 04f914b..f112547 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6fd5e95..73450c2 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 5f147c3..8bc8edd 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -63,7 +63,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055e285..b375cd5 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -29,6 +29,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-syscon-power.h>
 #include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -85,6 +86,9 @@
 	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
 	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
 	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+	SAVE_ITEM(S3C64XX_SDMA_SEL),
+	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
 };
 
 void s3c_pm_configure_extint(void)
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 5e93fe3..7a3bc32 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,7 @@
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 312aa6b..4117003 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index f344a22..c75a71b 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,41 +22,3 @@
 	[2] = "mmc_bus",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518..18690c5 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,28 @@
 
 config CPU_S5P6440
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
@@ -31,6 +41,7 @@
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -39,6 +50,7 @@
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6440
@@ -46,6 +58,7 @@
 config MACH_SMDK6450
 	bool "SMDK6450"
 	select CPU_S5P6450
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -54,6 +67,7 @@
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..a1324d8 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -12,10 +12,11 @@
 
 # Core support for S5P64X0 system
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o
 
 # machine support
 
@@ -28,3 +29,4 @@
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd30..c54c65d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -146,7 +146,8 @@
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -499,6 +500,11 @@
 	&clk_pclk_low,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6440_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -581,5 +587,7 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16c..2d04abf 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -179,7 +179,8 @@
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -553,6 +554,11 @@
 	&clk_sclk_audio0,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6450_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -632,5 +638,7 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index 8a93854..ecab40c 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -39,6 +39,7 @@
 #include <plat/s5p6440.h>
 #include <plat/s5p6450.h>
 #include <plat/adc-core.h>
+#include <plat/fb-core.h>
 
 /* Initial IO mappings */
 
@@ -109,6 +110,7 @@
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -119,6 +121,7 @@
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 0e5b3e6..442dd4a 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -21,115 +21,208 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p64x0_pdma_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PDMA,
-		.end	= S5P64X0_PA_PDMA + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DMA0,
-		.end	= IRQ_DMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_MAX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_MAX,
-		[17] = DMACH_MAX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_MAX,
-		[23] = DMACH_MAX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MAX,
-		[28] = DMACH_MAX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+	.peri = s5p6440_pdma_peri,
+};
+
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_USI_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_USI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_UART4_RX,
-		[9] = DMACH_UART4_TX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_PCM1_TX,
-		[17] = DMACH_PCM1_RX,
-		[18] = DMACH_PCM2_TX,
-		[19] = DMACH_PCM2_RX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_USI_TX,
-		[23] = DMACH_USI_RX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_I2S1_TX,
-		[26] = DMACH_I2S1_RX,
-		[27] = DMACH_I2S2_TX,
-		[28] = DMACH_I2S2_RX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_UART5_RX,
-		[31] = DMACH_UART5_TX,
-	},
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+	.peri = s5p6450_pdma_peri,
 };
 
-static struct platform_device s5p64x0_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
-	.resource	= s5p64x0_pdma_resource,
-	.dev		= {
+struct amba_device s5p64x0_device_pdma = {
+	.dev = {
+		.init_name = "dma-pl330",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.res = {
+		.start = S5P64X0_PA_PDMA,
+		.end = S5P64X0_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_DMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5p64x0_dma_init(void)
@@ -139,7 +232,7 @@
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
 
-	platform_device_register(&s5p64x0_device_pdma);
+	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb..5a622af 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5837a36..53982db 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -87,6 +87,10 @@
 
 #define IRQ_I2S0		IRQ_I2SV40
 
+#define IRQ_LCD_FIFO		IRQ_DISPCON0
+#define IRQ_LCD_VSYNC		IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
+
 /* S5P6450 EINT feature will be added */
 
 /*
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 95c9125..4d3ac8a 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -47,6 +47,8 @@
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
+#define S5P64X0_PA_FB		0xEE000000
+
 #define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
@@ -64,6 +66,7 @@
 #define S3C_PA_IIC1		S5P6440_PA_IIC1
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
+#define S3C_PA_FB		S5P64X0_PA_FB
 
 #define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
 #define S5P_PA_SROMC		S5P64X0_PA_SROMC
@@ -85,5 +88,6 @@
 #define S5P_PA_UART5		S5P6450_PA_UART(5)
 
 #define S5P_SZ_UART		SZ_256
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
new file mode 100644
index 0000000..e52f754
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+	/*
+	 * As a note, since the S5P64X0 UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+	__raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow	((1 << 16) - 1)
+#define s3c_irqwake_intallow	(~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/*
+	 * S5P64X0 UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settings.
+	 */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/*
+	 * We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/*
+		 * change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0
+		 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		!(save_clk & S3C6400_UCON_UCLK0) &&
+		delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/*
+			 * as a precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa
+			 */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* ensure sleep mode has been cleared from the system */
+	__raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+	/*
+	 * turn on the sleep mode and keep it there, as it seems that during
+	 * suspend the xCON registers get re-set and thus you can end up with
+	 * problems between going to sleep and resuming.
+	 */
+	__raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
deleted file mode 100644
index 19fff8b7..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S5P64X0 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
index a133f22..bd91112 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -41,17 +41,50 @@
 #define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
 #define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
 
+#define S5P64X0_AHB_CON0		S5P_CLKREG(0x100)
 #define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
 
 #define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
 #define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
 
 #define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE		S5P_CLKREG(0x828)
+
 #define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT		S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0			S5P_CLKREG(0xA00)
 
 #define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
 #define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
 
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG	(1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG	(1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3	(1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2	(1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1	(1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0	(1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE		(1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE		(1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE	(1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE	(1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK		(3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP		(3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN	(1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4	(4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT	(1 << 31)
+#define S5P64X0_OTHERS_RET_UART		(1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1		(1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0		(1 << 24)
 #define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
 
 /* Compatibility defines */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce2547..cfdfa4f 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,14 +34,35 @@
 #define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
 #define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+#define S5P64X0_SPCON1			(S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0		(S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1		(S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON		(S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON		(S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON		(S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON		(S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK		(S5P_VA_GPIO + 0x240)
+
 /* External interrupt control registers for group0 */
 
 #define EINT0CON0_OFFSET		(0x900)
+#define EINT0FLTCON0_OFFSET		(0x910)
+#define EINT0FLTCON1_OFFSET		(0x914)
 #define EINT0MASK_OFFSET		(0x920)
 #define EINT0PEND_OFFSET		(0x924)
 
 #define S5P64X0_EINT0CON0		(S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0		(S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1		(S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
 #define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
 #define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
 
+#define S5P64X0_SLPEN			(S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP		(1 << 0)
+
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index 494e1a8..275dc74 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/gpio-cfg.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
@@ -134,6 +135,7 @@
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+	ct->chip.irq_set_wake = s3c_irqext_wake;
 	ct->regs.ack = EINT0PEND_OFFSET;
 	ct->regs.mask = EINT0MASK_OFFSET;
 	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
new file mode 100644
index 0000000..3e6f245
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S5P64X0_EINT0CON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+	SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+	u32	con;
+	u32	fltcon;
+	u32	mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+	.suspend = s5p64x0_irq_pm_suspend,
+	.resume  = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+	return 0;
+}
+core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 88857f5..4a1250c 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -92,6 +97,59 @@
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+	.win[0]		= &smdk6440_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6440_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6440_GPN(5), 1);
+		gpio_set_value(S5P6440_GPN(5), 0);
+		gpio_set_value(S5P6440_GPN(5), 1);
+		gpio_free(S5P6440_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+	.set_power	= smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6440_lcd_power_data,
+};
+
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -101,6 +159,8 @@
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6440_device_iis,
+	&s3c_device_fb,
+	&smdk6440_lcd_lte480wv,
 };
 
 static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -147,6 +207,17 @@
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6440_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -160,6 +231,9 @@
 
 	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 
+	s5p6440_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index e1b277b..0ab129e 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -110,6 +115,59 @@
 #endif
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+	.win_mode	= {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+	.win[0]		= &smdk6450_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6450_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6450_GPN(5), 1);
+		gpio_set_value(S5P6450_GPN(5), 0);
+		gpio_set_value(S5P6450_GPN(5), 1);
+		gpio_free(S5P6450_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+	.set_power	= smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6450_lcd_power_data,
+};
+
 static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -119,6 +177,9 @@
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6450_device_iis0,
+	&s3c_device_fb,
+	&smdk6450_lcd_lte480wv,
+
 	/* s5p6450_device_spi0 will be added */
 };
 
@@ -166,6 +227,17 @@
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6450_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6450_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -179,6 +251,9 @@
 
 	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 
+	s5p6450_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
 }
 
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
new file mode 100644
index 0000000..6992724
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -0,0 +1,204 @@
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+	SAVE_ITEM(S5P64X0_APLL_CON),
+	SAVE_ITEM(S5P64X0_MPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON_K),
+	SAVE_ITEM(S5P64X0_CLK_SRC0),
+	SAVE_ITEM(S5P64X0_CLK_SRC1),
+	SAVE_ITEM(S5P64X0_CLK_DIV0),
+	SAVE_ITEM(S5P64X0_CLK_DIV1),
+	SAVE_ITEM(S5P64X0_CLK_DIV2),
+	SAVE_ITEM(S5P64X0_CLK_DIV3),
+	SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+	SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+	SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+	SAVE_ITEM(S5P64X0_AHB_CON0),
+	SAVE_ITEM(S5P64X0_SPCON0),
+	SAVE_ITEM(S5P64X0_SPCON1),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+	SAVE_ITEM(S5P64X0_MEM0DRVCON),
+	SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+	SAVE_ITEM(S5P6450_DPLL_CON),
+	SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+	s3c_pm_do_restore_core(s5p64x0_core_save,
+				ARRAY_SIZE(s5p64x0_core_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_restore_core(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_save(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp = 0;
+
+	/*
+	 * Issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case.
+	 */
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+	/* we should never get past here */
+	panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+	u32 tmp;
+
+	samsung_sync_wakemask(S5P64X0_PWR_CFG,
+			s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+	/* store the resume address in INFORM0 register */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+	/* setup clock gating for FIMGVG block */
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+		(S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+		(S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+	/* Configure the stabilization counter with wait time required */
+	__raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+	/* set WFI to SLEEP mode configuration */
+	tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+	tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+	__raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+	tmp = __raw_readl(S5P64X0_PWR_CFG);
+	tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+	tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S5P64X0_PWR_CFG);
+
+	/*
+	 * set OTHERS register to disable interrupt before going to
+	 * sleep. This bit is present only in S5P6450, it is reserved
+	 * in S5P6440.
+	 */
+	if (soc_is_s5p6450()) {
+		tmp = __raw_readl(S5P64X0_OTHERS);
+		tmp |= S5P6450_OTHERS_DISABLE_INT;
+		__raw_writel(tmp, S5P64X0_OTHERS);
+	}
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s5p64x0_pm_prepare;
+	pm_cpu_sleep = s5p64x0_cpu_suspend;
+	pm_uart_udivslot = 1;
+
+	return 0;
+}
+
+static struct sysdev_driver s5p64x0_pm_driver = {
+	.add		= s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+	s3c_pm_init();
+
+	return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(S5P64X0_OTHERS);
+	tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+			S5P64X0_OTHERS_RET_UART);
+	__raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+	.resume		= s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+	return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 0000000..f346ee4
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	if (soc_is_s5p6440()) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (soc_is_s5p6450()) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e8a33c4..e538a4c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@
 config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb3..8d47709 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -33,6 +33,11 @@
 	.name		= "otg_phy",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clk_src_mout_href_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_fin_hpll,
@@ -454,14 +459,14 @@
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1276,5 +1281,7 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0f..065a087 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,150 +21,246 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
+#include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pc100_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA0,
-		.end    = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_EXTERNAL,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_HSI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_HSI_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_EXTERNAL,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_HSI_RX,
-		[29] = DMACH_HSI_TX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pc100_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
-	.resource	= s5pc100_pdma0_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma0_pdata,
 	},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA1,
-		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PC100_PA_PDMA0,
+		.end = S5PC100_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device s5pc100_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
-	.resource	= s5pc100_pdma1_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
-	&s5pc100_device_pdma0,
-	&s5pc100_device_pdma1,
+	.res = {
+		.start = S5PC100_PA_PDMA1,
+		.end = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pc100_dma_init(void)
 {
-	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5pc100/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
deleted file mode 100644
index b34d2f7..0000000
--- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index be25879..6418c6e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -11,17 +11,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -31,35 +21,3 @@
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = "48m",		- note not successfully used yet */
 };
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index aaeb44a..646057a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,9 +11,11 @@
 
 config CPU_S5PV210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable S5PV210 CPU support
 
@@ -93,11 +95,13 @@
 	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
 	select SAMSUNG_DEV_KEYPAD
+	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_FIMC
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ef7e466..009fbe5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
 
 # machine support
 
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f5f8fa8..4c5ac7a 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -174,6 +174,16 @@
 	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
@@ -203,6 +213,11 @@
 	.name		= "pcmcdclk",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -289,14 +304,14 @@
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -330,6 +345,40 @@
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 16),
 	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hdmi",
+		.devname	= "s5pv210-hdmi",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "s5pv210-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
 		.name		= "otg",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip1_ctrl,
@@ -407,6 +456,12 @@
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<9),
 	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
 		.name		= "spi",
 		.devname	= "s3c64xx-spi.0",
 		.parent		= &clk_pclk_psys.clk,
@@ -594,6 +649,23 @@
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
 };
 
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clk *clkset_sclk_audio0_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_pcmcdclk0,
@@ -777,14 +849,6 @@
 		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "sclk_mixer",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &clkset_sclk_mixer,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
-	}, {
-		.clk	= {
 			.name		= "sclk_fimc",
 			.devname	= "s5pv210-fimc.0",
 			.enable		= s5pv210_clk_mask1_ctrl,
@@ -973,9 +1037,6 @@
 	&clk_pclk_psys,
 	&clk_vpllsrc,
 	&clk_sclk_vpll,
-	&clk_sclk_dac,
-	&clk_sclk_pixel,
-	&clk_sclk_hdmi,
 	&clk_mout_dmc0,
 	&clk_sclk_dmc0,
 	&clk_sclk_audio0,
@@ -1060,6 +1121,61 @@
 	.get_rate = s5p_epll_get_rate,
 };
 
+static u32 vpll_div[][5] = {
+	{  54000000, 3, 53, 3, 0 },
+	{ 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con = __raw_readl(S5P_VPLL_CON);
+	vpll_con &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+			vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+			vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+			vpll_con |= vpll_div[i][4] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con, S5P_VPLL_CON);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+	.get_rate = s5pv210_vpll_get_rate,
+	.set_rate = s5pv210_vpll_set_rate,
+};
+
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1108,6 +1224,7 @@
 	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &s5pv210_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1153,11 +1270,15 @@
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 9114572..84ec746 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -42,6 +42,7 @@
 #include <plat/keypad-core.h>
 #include <plat/sdhci.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 /* Initial IO mappings */
 
@@ -145,6 +146,9 @@
 
 	/* Use s5pv210-keypad instead of samsung-keypad */
 	samsung_keypad_setname("s5pv210-keypad");
+
+	/* setup TV devices */
+	s5p_hdmi_setname("s5pv210-hdmi");
 }
 
 void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 497d343..86b749c 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,151 +21,240 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pv210_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA0,
-		.end    = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_MAX,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pv210_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
-	.resource	= s5pv210_pdma0_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma0_pdata,
 	},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA1,
-		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PV210_PA_PDMA0,
+		.end = S5PV210_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
+};
+
+struct dma_pl330_peri pdma1_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_PCM2_RX,
-		[31] = DMACH_PCM2_TX,
-	},
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device s5pv210_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
-	.resource	= s5pv210_pdma1_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
-	&s5pv210_device_pdma0,
-	&s5pv210_device_pdma1,
+	.res = {
+		.start = S5PV210_PA_PDMA1,
+		.end = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pv210_dma_init(void)
 {
-	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/mach-s5pv210/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 81209eb..201842a 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index b9f9ec3..5e0de3a 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -56,7 +56,7 @@
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
 #define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -86,7 +86,7 @@
 #define IRQ_HDMI		S5P_IRQ_VIC2(12)
 #define IRQ_IIC1		S5P_IRQ_VIC2(13)
 #define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_SDO			S5P_IRQ_VIC2(15)
 #define IRQ_I2S0		S5P_IRQ_VIC2(16)
 #define IRQ_I2S1		S5P_IRQ_VIC2(17)
 #define IRQ_I2S2		S5P_IRQ_VIC2(18)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index aac343c..7ff609f 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,12 @@
 #define S5PV210_PA_FIMC1		0xFB300000
 #define S5PV210_PA_FIMC2		0xFB400000
 
+#define S5PV210_PA_SDO			0xF9000000
+#define S5PV210_PA_VP			0xF9100000
+#define S5PV210_PA_MIXER		0xF9200000
+#define S5PV210_PA_HDMI			0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY		0xFA900000
+
 /* Compatibiltiy Defines */
 
 #define S3C_PA_FB			S5PV210_PA_FB
@@ -110,6 +116,13 @@
 #define S5P_PA_FIMC2			S5PV210_PA_FIMC2
 #define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
 #define S5P_PA_MFC			S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO			S5PV210_PA_SDO
+#define S5P_PA_VP			S5PV210_PA_VP
+#define S5P_PA_MIXER			S5PV210_PA_MIXER
+#define S5P_PA_HDMI			S5PV210_PA_HDMI
+
 #define S5P_PA_ONENAND			S5PC110_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index 3e22109..eba8aea 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -43,4 +43,4 @@
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
deleted file mode 100644
index f8a9f1b..0000000
--- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5PV210 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 78925c5..032de66 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -144,8 +144,9 @@
 
 #define S5P_OTHERS		S5P_CLKREG(0xE000)
 #define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
 #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
 #define S5P_MIPI_DPHY_ENABLE	(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN	(1 << 1)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 061cc7e..15edcae 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -272,6 +277,14 @@
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+static void goni_camera_init(void)
+{
+	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+	/* Set max driver strength on CAM_A_CLKOUT pin. */
+	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -285,6 +298,7 @@
 
 static struct regulator_consumer_supply goni_ldo8_consumers[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +489,10 @@
 static struct regulator_consumer_supply buck2_consumer =
 	REGULATOR_SUPPLY("vddint", NULL);
 
+static struct regulator_consumer_supply buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
 static struct regulator_init_data goni_buck1_data = {
 	.constraints	= {
 		.name		= "VARM_1.2V",
@@ -511,6 +529,8 @@
 			.enabled = 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck3_consumer,
 };
 
 static struct regulator_init_data goni_buck4_data = {
@@ -801,6 +821,34 @@
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+	.clk_rate	= 16000000UL,
+	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
+	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+	.platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_ITU_601,
+		.board_info	= &noon010pc30_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 16000000UL,
+	},
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+	.isp_info	= goni_camera_sensors,
+	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
@@ -812,10 +860,13 @@
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+	&s5p_device_mixer,
+	&s5p_device_sdo,
 	&s3c_device_i2c0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5p_device_fimc_md,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -884,6 +935,12 @@
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
+	/* FIMC */
+	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	goni_camera_init();
+
 	/* SPI */
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index a83b6c9..6b8ccc4 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -10,17 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -30,34 +20,3 @@
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = NULL,		- reserved */
 };
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
deleted file mode 100644
index e3452cc..0000000
--- a/arch/arm/mach-s5pv210/sleep.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- * 	Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
-	.text
-
-	/* sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	*/
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
-	*/
-
-ENTRY(s3c_cpu_resume)
-	b	cpu_resume
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bd3e1bf..2965cc9 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
+#include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/collie.h>
 
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 0bb520d..77198fe 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -26,6 +26,7 @@
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
+#include <asm/page.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0c8f6cf..0828fab 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -26,6 +26,7 @@
 	select SH_CLK_CPG
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
+	select I2C
 
 comment "SH-Mobile Board Type"
 
@@ -69,6 +70,11 @@
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
 
+config MACH_KOTA2
+	bool "KOTA2 board"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on ARCH_SH73A0
+
 comment "SH-Mobile System Configuration"
 
 menu "Memory configuration"
@@ -78,6 +84,7 @@
 	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
 				MACH_MACKEREL
+	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
 	  Tweak this only when porting to a new machine which does not
@@ -89,6 +96,7 @@
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
 	default "0x20000000" if MACH_AG5EVM
+	default "0x1e000000" if MACH_KOTA2
 	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
 	help
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 612b270..737bdc6 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o pm_runtime.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
@@ -41,6 +41,7 @@
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
+obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 475342b..b862e9f 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -59,7 +59,7 @@
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= gic_spi(33), /* PINT1 */
+		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -339,6 +339,18 @@
 	},
 };
 
+/* SDHI0 */
+static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
+{
+	struct device *dev = arg;
+	struct sh_mobile_sdhi_info *info = dev->platform_data;
+	struct tmio_mmc_data *pdata = info->pdata;
+
+	tmio_mmc_cd_wakeup(pdata);
+
+	return IRQ_HANDLED;
+}
+
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
@@ -462,19 +474,6 @@
 	shmobile_setup_console();
 }
 
-#define PINTC_ADDR	0xe6900000
-#define PINTER0A	(PINTC_ADDR + 0xa0)
-#define PINTCR0A	(PINTC_ADDR + 0xb0)
-
-void __init ag5evm_init_irq(void)
-{
-	sh73a0_init_irq();
-
-	/* setup PINT: enable PINTA2 as active low */
-	__raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
-	__raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
-}
-
 #define DSI0PHYCR	0xe615006c
 
 static void __init ag5evm_init(void)
@@ -516,14 +515,14 @@
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0, NULL);
 	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
 	gpio_request(GPIO_PORT208, NULL); /* Reset */
 	gpio_direction_output(GPIO_PORT208, 1);
 
@@ -570,6 +569,13 @@
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
+	if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
+			 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			 "sdhi0 cd", &sdhi0_device.dev))
+		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
+	else
+		pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
+
 	/* enable SDHI1 on CN4 [WLAN I/F] */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
 	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
@@ -601,7 +607,7 @@
 
 MACHINE_START(AG5EVM, "ag5evm")
 	.map_io		= ag5evm_map_io,
-	.init_irq	= ag5evm_init_irq,
+	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= shmobile_handle_irq_gic,
 	.init_machine	= ag5evm_init,
 	.timer		= &ag5evm_timer,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 5b7edad..4c865ec 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -200,8 +200,8 @@
 
 static struct resource nor_flash_resources[] = {
 	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
+		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
 		.flags	= IORESOURCE_MEM,
 	}
 };
@@ -933,7 +933,7 @@
 static struct sh_csi2_client_config csi2_clients[] = {
 	{
 		.phy		= SH_CSI2_PHY_MAIN,
-		.lanes		= 3,
+		.lanes		= 0,		/* default: 2 lanes */
 		.channel	= 0,
 		.pdev		= &ap4evb_camera,
 	},
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
new file mode 100644
index 0000000..bd9a784
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -0,0 +1,454 @@
+/*
+ * kota2 board support
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+/* SMSC 9220 */
+static struct resource smsc9220_resources[] = {
+	[0] = {
+		.start		= 0x14000000, /* CS5A */
+		.end		= 0x140000ff, /* A1->A7 */
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= gic_spi(33), /* PINTA2 @ PORT144 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.dev  = {
+		.platform_data = &smsc9220_platdata,
+	},
+	.resource	= smsc9220_resources,
+	.num_resources	= ARRAY_SIZE(smsc9220_resources),
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_platdata = {
+	.mode		= SH_KEYSC_MODE_6,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes	= {
+		KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
+		0, 0, 0, 0, 0,
+		KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
+		0, KEY_DOWN, 0, 0, 0,
+		KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
+		KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
+		KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
+		0, KEY_UP, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start	= 0xe61b0000,
+		.end	= 0xe61b0098 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(71),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name		= "sh_keysc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(keysc_resources),
+	.resource	= keysc_resources,
+	.dev		= {
+		.platform_data	= &keysc_platdata,
+	},
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
+	GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
+	GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
+	GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
+	GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
+	GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
+	GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
+	GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
+	/* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
+	GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
+	/* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons        = gpio_buttons,
+	.nbuttons       = ARRAY_SIZE(gpio_buttons),
+	.poll_interval  = 250, /* polled for now */
+};
+
+static struct platform_device gpio_keys_device = {
+	.name   = "gpio-keys-polled", /* polled for now */
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* GPIO LED */
+#define GPIO_LED(n, g) { .name = n, .gpio = g }
+
+static struct gpio_led gpio_leds[] = {
+	GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
+	GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
+	GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
+	GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
+	GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
+	GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
+	GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_leds_info,
+	},
+};
+
+/* MMCIF */
+static struct resource mmcif_resources[] = {
+	[0] = {
+		.name   = "MMCIF",
+		.start  = 0xe6bd0000,
+		.end    = 0xe6bd00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(140),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(141),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data mmcif_info = {
+	.ocr            = MMC_VDD_165_195,
+	.caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmcif_device = {
+	.name           = "sh_mmcif",
+	.id             = 0,
+	.dev            = {
+		.platform_data          = &mmcif_info,
+	},
+	.num_resources  = ARRAY_SIZE(mmcif_resources),
+	.resource       = mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
+	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name   = "SDHI0",
+		.start  = 0xee100000,
+		.end    = 0xee1000ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(83),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(84),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.dev    = {
+		.platform_data  = &sdhi0_info,
+	},
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
+	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name   = "SDHI1",
+		.start  = 0xee120000,
+		.end    = 0xee1200ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(87),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = gic_spi(88),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= gic_spi(89),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.id             = 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.dev    = {
+		.platform_data  = &sdhi1_info,
+	},
+};
+
+static struct platform_device *kota2_devices[] __initdata = {
+	&eth_device,
+	&keysc_device,
+	&gpio_keys_device,
+	&gpio_leds_device,
+	&mmcif_device,
+	&sdhi0_device,
+	&sdhi1_device,
+};
+
+static struct map_desc kota2_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init kota2_map_io(void)
+{
+	iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
+
+	/* setup early devices and console here as well */
+	sh73a0_add_early_devices();
+	shmobile_setup_console();
+}
+
+#define PINTER0A	0xe69000a0
+#define PINTCR0A	0xe69000b0
+
+void __init kota2_init_irq(void)
+{
+	sh73a0_init_irq();
+
+	/* setup PINT: enable PINTA2 as active low */
+	__raw_writel(1 << 29, PINTER0A);
+	__raw_writew(2 << 10, PINTCR0A);
+}
+
+static void __init kota2_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* SCIFA2 (UART2) */
+	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
+	gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
+
+	/* SCIFA4 (UART1) */
+	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+	/* SMSC911X */
+	gpio_request(GPIO_FN_D0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_NAF15, NULL);
+	gpio_request(GPIO_FN_CS5A_, NULL);
+	gpio_request(GPIO_FN_WE0__FWE, NULL);
+	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
+	gpio_direction_input(GPIO_PORT144);
+	gpio_request(GPIO_PORT145, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT145, 1);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN6_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN7_PU, NULL);
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
+	gpio_request(GPIO_FN_KEYOUT8, NULL);
+
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_PORT208, NULL); /* Reset */
+	gpio_direction_output(GPIO_PORT208, 1);
+
+	/* SDHI0 (microSD) */
+	gpio_request(GPIO_FN_SDHICD0_PU, NULL);
+	gpio_request(GPIO_FN_SDHICMD0_PU, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3_PU, NULL);
+	gpio_request(GPIO_FN_SDHID0_2_PU, NULL);
+	gpio_request(GPIO_FN_SDHID0_1_PU, NULL);
+	gpio_request(GPIO_FN_SDHID0_0_PU, NULL);
+
+	/* SCIFB (BT) */
+	gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL);
+	gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL);
+	gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL);
+	gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL);
+	gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL);
+
+	/* SDHI1 (BCM4330) */
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
+	gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
+	gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
+	gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
+	gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(__io(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+	sh73a0_add_standard_devices();
+	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
+}
+
+static void __init kota2_timer_init(void)
+{
+	sh73a0_clock_init();
+	shmobile_timer.init();
+	return;
+}
+
+struct sys_timer kota2_timer = {
+	.init	= kota2_timer_init,
+};
+
+MACHINE_START(KOTA2, "kota2")
+	.map_io		= kota2_map_io,
+	.init_irq	= kota2_init_irq,
+	.handle_irq	= shmobile_handle_irq_gic,
+	.init_machine	= kota2_init,
+	.timer		= &kota2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3689ad2..9c5e598 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -273,8 +273,8 @@
 
 static struct resource nor_flash_resources[] = {
 	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
+		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
 		.flags	= IORESOURCE_MEM,
 	}
 };
@@ -1223,9 +1223,10 @@
 		.width = 640,
 		.height = 480,
 	},
-	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
-	SOCAM_DATA_ACTIVE_HIGH,
+	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+	V4L2_MBUS_DATA_ACTIVE_HIGH,
+	.mbus_type = V4L2_MBUS_PARALLEL,
 	.set_capture = camera_set_capture,
 };
 
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 6697592..995a9c3 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -476,7 +476,7 @@
 	.disable	= fsidiv_disable,
 };
 
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
 	.phys	= FSIDIVA,
 	.len	= 8,
 };
@@ -484,10 +484,10 @@
 struct clk sh7372_fsidiva_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &sh7372_fsidiva_clk_mapping,
+	.mapping	= &fsidiva_clk_mapping,
 };
 
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
 	.phys	= FSIDIVB,
 	.len	= 8,
 };
@@ -495,7 +495,7 @@
 struct clk sh7372_fsidivb_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &sh7372_fsidivb_clk_mapping,
+	.mapping	= &fsidivb_clk_mapping,
 };
 
 static struct clk *late_main_clks[] = {
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 6b7c7c4..31654d7 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sh_clk.h>
+#include <linux/export.h>
 
 int __init clk_init(void)
 {
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 2e44f11..1b23342 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -26,65 +26,59 @@
 };
 
 static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_state *state)
+				  struct cpuidle_driver *drv,
+				  int index)
 {
 	ktime_t before, after;
-	int requested_state = state - &dev->states[0];
 
-	dev->last_state = &dev->states[requested_state];
 	before = ktime_get();
 
 	local_irq_disable();
 	local_fiq_disable();
 
-	shmobile_cpuidle_modes[requested_state]();
+	shmobile_cpuidle_modes[index]();
 
 	local_irq_enable();
 	local_fiq_enable();
 
 	after = ktime_get();
-	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+	dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	return index;
 }
 
 static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_driver = {
 	.name =		"shmobile_cpuidle",
 	.owner =	THIS_MODULE,
+	.states[0] = {
+		.name = "C1",
+		.desc = "WFI",
+		.exit_latency = 1,
+		.target_residency = 1 * 2,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+	},
+	.safe_state_index = 0, /* C1 */
+	.state_count = 1,
 };
 
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 static int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_state *state;
+	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
 	int i;
 
-	cpuidle_register_driver(&shmobile_cpuidle_driver);
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
-		dev->states[i].enter = shmobile_cpuidle_enter;
-	}
-
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
-	dev->safe_state = state;
-	dev->state_count = i;
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+		drv->states[i].enter = shmobile_cpuidle_enter;
 
 	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(dev);
+		shmobile_cpuidle_setup(drv);
 
+	cpuidle_register_driver(drv);
+
+	dev->state_count = drv->state_count;
 	cpuidle_register_device(dev);
 
 	return 0;
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0cdbf9..834bd6c 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -9,9 +9,9 @@
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h
new file mode 100644
index 0000000..8b22258
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/intc.h
@@ -0,0 +1,246 @@
+#ifndef __ASM_MACH_INTC_H
+#define __ASM_MACH_INTC_H
+#include <linux/sh_intc.h>
+
+#define INTC_IRQ_PINS_ENUM_16L(p)				\
+	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
+	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
+	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
+	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
+
+#define INTC_IRQ_PINS_ENUM_16H(p)				\
+	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
+	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
+	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
+	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
+
+#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
+	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
+	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
+	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
+	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
+	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
+	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
+	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
+	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
+
+#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
+	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
+	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
+	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
+	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
+	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
+	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
+	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
+	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
+
+#define INTC_IRQ_PINS_MASK_16L(p, base)					\
+	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
+	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
+	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
+	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
+	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
+	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_MASK_16H(p, base)					\
+	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
+	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
+	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
+	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
+	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
+	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
+	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
+	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
+	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
+	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
+	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
+	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
+	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
+	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
+	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
+	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
+	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
+	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
+	{ base + 0x00, 32, 4, /* ICR1A */				\
+	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
+	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
+	{ base + 0x04, 32, 4, /* ICR2A */				\
+	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
+	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
+	{ base + 0x08, 32, 4, /* ICR3A */				\
+	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
+	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
+	{ base + 0x0c, 32, 4, /* ICR4A */				\
+	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
+	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_ACK_16L(p, base)					\
+	{ base + 0x20, 0, 8, /* INTREQ00A */				\
+	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
+	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
+	{ base + 0x24, 0, 8, /* INTREQ10A */				\
+	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
+	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
+
+#define INTC_IRQ_PINS_ACK_16H(p, base)					\
+	{ base + 0x28, 0, 8, /* INTREQ20A */				\
+	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
+	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
+	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
+	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
+	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
+
+#define INTC_IRQ_PINS_16(p, base, vect, str)				\
+									\
+static struct resource p ## _resources[] __initdata = {			\
+	[0] = {								\
+		.start	= base,						\
+		.end	= base + 0x64,					\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+};									\
+									\
+enum {									\
+	p ## _UNUSED = 0,						\
+	INTC_IRQ_PINS_ENUM_16L(p),					\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	INTC_IRQ_PINS_VECT_16L(p, vect),				\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	INTC_IRQ_PINS_MASK_16L(p, base),				\
+};									\
+									\
+static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
+	INTC_IRQ_PINS_PRIO_16L(p, base),				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	INTC_IRQ_PINS_SENSE_16L(p, base),				\
+};									\
+									\
+static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
+	INTC_IRQ_PINS_ACK_16L(p, base),					\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.resource = p ## _resources,					\
+	.num_resources = ARRAY_SIZE(p ## _resources),			\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, p ## _prio_registers, \
+			     p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_IRQ_PINS_32(p, base, vect, str)				\
+									\
+static struct resource p ## _resources[] __initdata = {			\
+	[0] = {								\
+		.start	= base,						\
+		.end	= base + 0x6c,					\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+};									\
+									\
+enum {									\
+	p ## _UNUSED = 0,						\
+	INTC_IRQ_PINS_ENUM_16L(p),					\
+	INTC_IRQ_PINS_ENUM_16H(p),					\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	INTC_IRQ_PINS_VECT_16L(p, vect),				\
+	INTC_IRQ_PINS_VECT_16H(p, vect),				\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	INTC_IRQ_PINS_MASK_16L(p, base),				\
+	INTC_IRQ_PINS_MASK_16H(p, base),				\
+};									\
+									\
+static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
+	INTC_IRQ_PINS_PRIO_16L(p, base),				\
+	INTC_IRQ_PINS_PRIO_16H(p, base),				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	INTC_IRQ_PINS_SENSE_16L(p, base),				\
+	INTC_IRQ_PINS_SENSE_16H(p, base),				\
+};									\
+									\
+static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
+	INTC_IRQ_PINS_ACK_16L(p, base),					\
+	INTC_IRQ_PINS_ACK_16H(p, base),					\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.resource = p ## _resources,					\
+	.num_resources = ARRAY_SIZE(p ## _resources),			\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, p ## _prio_registers, \
+			     p ## _sense_registers, p ## _ack_registers) \
+}
+
+#define INTC_PINT_E_EMPTY
+#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
+#define INTC_PINT_E(p)							\
+	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
+	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
+
+#define INTC_PINT_V_NONE
+#define INTC_PINT_V(p, vect)					\
+	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
+	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
+	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
+	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
+
+#define INTC_PINT(p, mask_reg, sense_base, str,				\
+	enums_1, enums_2, enums_3, enums_4,				\
+	vect_1, vect_2, vect_3, vect_4,					\
+	mask_a, mask_b, mask_c, mask_d,					\
+	sense_a, sense_b, sense_c, sense_d)				\
+									\
+enum {									\
+	PINT ## p ## _UNUSED = 0,					\
+	enums_1 enums_2 enums_3 enums_4 				\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	vect_1 vect_2 vect_3 vect_4					\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	{ mask_reg, 0, 32, /* PINTER */					\
+	  { mask_a mask_b mask_c mask_d } }				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
+	  { sense_a } },						\
+	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
+	  { sense_b } },						\
+	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
+	  { sense_c } },						\
+	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
+	  { sense_d } },						\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, NULL,		\
+			     p ## _sense_registers, NULL),		\
+}
+
+#endif  /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 216c3d6..881d515 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -451,18 +451,39 @@
 	GPIO_FN_KEYIN5_PU,
 	GPIO_FN_KEYIN6_PU,
 	GPIO_FN_KEYIN7_PU,
+	GPIO_FN_SDHICD0_PU,
+	GPIO_FN_SDHID0_0_PU,
+	GPIO_FN_SDHID0_1_PU,
+	GPIO_FN_SDHID0_2_PU,
+	GPIO_FN_SDHID0_3_PU,
+	GPIO_FN_SDHICMD0_PU,
+	GPIO_FN_SDHIWP0_PU,
 	GPIO_FN_SDHID1_0_PU,
 	GPIO_FN_SDHID1_1_PU,
 	GPIO_FN_SDHID1_2_PU,
 	GPIO_FN_SDHID1_3_PU,
 	GPIO_FN_SDHICMD1_PU,
+	GPIO_FN_SDHID2_0_PU,
+	GPIO_FN_SDHID2_1_PU,
+	GPIO_FN_SDHID2_2_PU,
+	GPIO_FN_SDHID2_3_PU,
+	GPIO_FN_SDHICMD2_PU,
 	GPIO_FN_MMCCMD0_PU,
 	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_MMCD0_0_PU,
+	GPIO_FN_MMCD0_1_PU,
+	GPIO_FN_MMCD0_2_PU,
+	GPIO_FN_MMCD0_3_PU,
+	GPIO_FN_MMCD0_4_PU,
+	GPIO_FN_MMCD0_5_PU,
+	GPIO_FN_MMCD0_6_PU,
+	GPIO_FN_MMCD0_7_PU,
 	GPIO_FN_FSIACK_PU,
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
 };
+
 /* DMA slave IDs */
 enum {
 	SHDMA_SLAVE_INVALID,
@@ -494,4 +515,8 @@
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
+/* PINT interrupts are located at Linux IRQ 768 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
index cc442d1..cfde9bf 100644
--- a/arch/arm/mach-shmobile/intc-sh7367.c
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <mach/intc.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -31,8 +32,6 @@
 	DISABLED,
 
 	/* interrupt sources INTCA */
-	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
-	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
 	DIRC,
 	CRYPT1_ERR, CRYPT2_STD,
 	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
@@ -76,14 +75,6 @@
 };
 
 static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
-	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
-	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
-	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
-	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
-	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
-	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
-	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
 	INTC_VECT(DIRC, 0x0560),
 	INTC_VECT(CRYPT1_ERR, 0x05e0),
 	INTC_VECT(CRYPT2_STD, 0x0700),
@@ -163,10 +154,6 @@
 };
 
 static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
 	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
 	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
 	    ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
@@ -212,11 +199,6 @@
 };
 
 static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-
 	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
 	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
 	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
@@ -240,29 +222,18 @@
 	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
 };
 
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
-	{ 0xe6900000, 16, 2, /* ICR1A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900004, 16, 2, /* ICR2A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
-	{ 0xe6900020, 0, 8, /* INTREQ00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900024, 0, 8, /* INTREQ10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-};
-
 static struct intc_desc intca_desc __initdata = {
 	.name = "sh7367-intca",
 	.force_enable = ENABLED,
 	.force_disable = DISABLED,
 	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
 			   intca_mask_registers, intca_prio_registers,
-			   intca_sense_registers, intca_ack_registers),
+			   NULL, NULL),
 };
 
+INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000,
+		 INTC_VECT, "sh7367-intca-irq-pins");
+
 enum {
 	UNUSED_INTCS = 0,
 
@@ -432,6 +403,7 @@
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intca_irq_pins_desc);
 	register_intc_controller(&intcs_desc);
 
 	/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 29cdc05..2d8856d 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <mach/intc.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -29,10 +30,6 @@
 	UNUSED_INTCA = 0,
 
 	/* interrupt sources INTCA */
-	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
-	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
-	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
-	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
 	DIRC,
 	CRYPT_STD,
 	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
@@ -86,22 +83,6 @@
 };
 
 static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
-	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
-	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
-	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
-	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
-	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
-	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
-	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
-	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
-	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
-	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
-	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
-	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
-	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
-	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
 	INTC_VECT(DIRC, 0x0560),
 	INTC_VECT(CRYPT_STD, 0x0700),
 	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
@@ -203,15 +184,6 @@
 };
 
 static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
 	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
 	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
 	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
@@ -282,15 +254,6 @@
 };
 
 static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900018, 0, 32, 4, /* INTPRI20A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
 	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
 	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
 	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
@@ -336,33 +299,13 @@
 	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
 };
 
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
-	{ 0xe6900000, 32, 4, /* ICR1A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900004, 32, 4, /* ICR2A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900008, 32, 4, /* ICR3A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690000c, 32, 4, /* ICR4A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
+static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
+			 intca_vectors, intca_groups,
+			 intca_mask_registers, intca_prio_registers,
+			 NULL);
 
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
-	{ 0xe6900020, 0, 8, /* INTREQ00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900024, 0, 8, /* INTREQ10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900028, 0, 8, /* INTREQ20A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690002c, 0, 8, /* INTREQ30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
-			     intca_vectors, intca_groups,
-			     intca_mask_registers, intca_prio_registers,
-			     intca_sense_registers, intca_ack_registers);
-
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-pins");
 enum {
 	UNUSED_INTCS = 0,
 	ENABLED_INTCS,
@@ -618,6 +561,7 @@
 	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intca_irq_pins_desc);
 	register_intc_controller(&intcs_desc);
 
 	/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
index fe45154..2af4e6e 100644
--- a/arch/arm/mach-shmobile/intc-sh7377.c
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <mach/intc.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -31,10 +32,6 @@
 	DISABLED,
 
 	/* interrupt sources INTCA */
-	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
-	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
-	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
-	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
 	DIRC,
 	_2DG,
 	CRYPT_STD,
@@ -91,22 +88,6 @@
 };
 
 static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
-	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
-	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
-	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
-	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
-	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
-	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
-	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
-	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
-	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
-	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
-	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
-	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
-	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
-	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
 	INTC_VECT(DIRC, 0x0560),
 	INTC_VECT(_2DG, 0x05e0),
 	INTC_VECT(CRYPT_STD, 0x0700),
@@ -203,15 +184,6 @@
 };
 
 static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
 	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
 	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
 	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
@@ -273,15 +245,6 @@
 };
 
 static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900018, 0, 32, 4, /* INTPRI10A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-
 	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
 	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
 	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
@@ -315,37 +278,18 @@
 	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
 };
 
-static struct intc_sense_reg intca_sense_registers[] __initdata = {
-	{ 0xe6900000, 16, 2, /* ICR1A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900004, 16, 2, /* ICR2A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900008, 16, 2, /* ICR3A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690000c, 16, 2, /* ICR4A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
-static struct intc_mask_reg intca_ack_registers[] __initdata = {
-	{ 0xe6900020, 0, 8, /* INTREQ00A */
-	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
-	{ 0xe6900024, 0, 8, /* INTREQ10A */
-	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
-	{ 0xe6900028, 0, 8, /* INTREQ20A */
-	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
-	{ 0xe690002c, 0, 8, /* INTREQ30A */
-	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
-};
-
 static struct intc_desc intca_desc __initdata = {
 	.name = "sh7377-intca",
 	.force_enable = ENABLED,
 	.force_disable = DISABLED,
 	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
 			   intca_mask_registers, intca_prio_registers,
-			   intca_sense_registers, intca_ack_registers),
+			   NULL, NULL),
 };
 
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+		 INTC_VECT, "sh7377-intca-irq-pins");
+
 /* this macro ignore entry which is also in INTCA */
 #define __IGNORE(a...)
 #define __IGNORE0(a...) 0
@@ -638,6 +582,7 @@
 	void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intca_irq_pins_desc);
 	register_intc_controller(&intcs_desc);
 
 	/* demux using INTEVTSA */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index a911a60..1eda6b0 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -22,6 +22,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <mach/intc.h>
+#include <mach/sh73a0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -255,20 +257,205 @@
 	return 0; /* always allow wakeup */
 }
 
+#define RELOC_BASE 0x1000
+
+/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
+
+INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
+		 INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
+
+static int to_gic_irq(struct irq_data *data)
+{
+	unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
+
+	if (vect >= 0x3200)
+		vect -= 0x3000;
+	else
+		vect -= 0x0200;
+
+	return gic_spi((vect >> 5) + 1);
+}
+
+static int to_intca_reloc_irq(struct irq_data *data)
+{
+	return data->irq + (RELOC_BASE >> 5);
+}
+
+#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
+#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
+
+static void intca_gic_enable(struct irq_data *data)
+{
+	irq_cb(irq_unmask, to_intca_reloc_irq(data));
+	irq_cb(irq_unmask, to_gic_irq(data));
+}
+
+static void intca_gic_disable(struct irq_data *data)
+{
+	irq_cb(irq_mask, to_gic_irq(data));
+	irq_cb(irq_mask, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_mask_ack(struct irq_data *data)
+{
+	irq_cb(irq_mask, to_gic_irq(data));
+	irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
+}
+
+static void intca_gic_eoi(struct irq_data *data)
+{
+	irq_cb(irq_eoi, to_gic_irq(data));
+}
+
+static int intca_gic_set_type(struct irq_data *data, unsigned int type)
+{
+	return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
+}
+
+static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
+{
+	return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
+}
+
+#ifdef CONFIG_SMP
+static int intca_gic_set_affinity(struct irq_data *data,
+				  const struct cpumask *cpumask,
+				  bool force)
+{
+	return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
+}
+#endif
+
+struct irq_chip intca_gic_irq_chip = {
+	.name			= "INTCA-GIC",
+	.irq_mask		= intca_gic_disable,
+	.irq_unmask		= intca_gic_enable,
+	.irq_mask_ack		= intca_gic_mask_ack,
+	.irq_eoi		= intca_gic_eoi,
+	.irq_enable		= intca_gic_enable,
+	.irq_disable		= intca_gic_disable,
+	.irq_shutdown		= intca_gic_disable,
+	.irq_set_type		= intca_gic_set_type,
+	.irq_set_wake		= intca_gic_set_wake,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= intca_gic_set_affinity,
+#endif
+};
+
+static int to_intc_vect(int irq)
+{
+	unsigned int irq_pin = irq - gic_spi(1);
+	unsigned int offs;
+
+	if (irq_pin < 16)
+		offs = 0x0200;
+	else
+		offs = 0x3000;
+
+	return offs + (irq_pin << 5);
+}
+
+static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
+{
+	generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
+	return IRQ_HANDLED;
+}
+
+static struct irqaction sh73a0_irq_pin_cascade[32];
+
+#define PINTER0 0xe69000a0
+#define PINTER1 0xe69000a4
+#define PINTRR0 0xe69000d0
+#define PINTRR1 0xe69000d4
+
+#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
+#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
+#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
+#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
+#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
+
+INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0",		\
+  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
+  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
+  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
+  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
+  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
+
+INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1",		\
+  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
+  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
+  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
+  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
+  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
+
+static struct irqaction sh73a0_pint0_cascade;
+static struct irqaction sh73a0_pint1_cascade;
+
+static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
+{
+	unsigned long value =  ioread32(rr) & ioread32(er);
+	int k;
+
+	for (k = 0; k < 32; k++) {
+		if (value & (1 << (31 - k))) {
+			generic_handle_irq(base_irq + k);
+			iowrite32(~(1 << (31 - k)), rr);
+		}
+	}
+}
+
+static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
+{
+	pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
+{
+	pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
+	return IRQ_HANDLED;
+}
+
 void __init sh73a0_init_irq(void)
 {
 	void __iomem *gic_dist_base = __io(0xf0001000);
 	void __iomem *gic_cpu_base = __io(0xf0000100);
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+	int k, n;
 
 	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
 
 	register_intc_controller(&intcs_desc);
+	register_intc_controller(&intca_irq_pins_desc);
+	register_intc_controller(&intc_pint0_desc);
+	register_intc_controller(&intc_pint1_desc);
 
 	/* demux using INTEVTSA */
 	sh73a0_intcs_cascade.name = "INTCS cascade";
 	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
 	sh73a0_intcs_cascade.dev_id = intevtsa;
 	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
+
+	/* IRQ pins require special handling through INTCA and GIC */
+	for (k = 0; k < 32; k++) {
+		sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
+		sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
+		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
+
+		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
+					      handle_level_irq, "level");
+		set_irq_flags(n, IRQF_VALID); /* yuck */
+	}
+
+	/* PINT pins are sanely tied to the GIC as SPI */
+	sh73a0_pint0_cascade.name = "PINT0 cascade";
+	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
+	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
+
+	sh73a0_pint1_cascade.name = "PINT1 cascade";
+	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
+	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
 }
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 128555e..e6e5246 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -21,68 +21,49 @@
 #include <linux/gpio.h>
 #include <mach/sh7367.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx)		\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
-	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx),	\
+	PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
-	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
-	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
-	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
-	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
-	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
-	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
-	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
-	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
-	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
 
 	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
 	PINMUX_FUNCTION_END,
@@ -327,41 +308,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
@@ -1098,13 +1044,9 @@
 	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT_273(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
@@ -1345,22 +1287,6 @@
 	GPIO_FN(DIVLOCK),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9c265da..1bd6585 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -25,27 +25,13 @@
 #include <linux/gpio.h>
 #include <mach/sh7372.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
-	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
-	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx), \
+	PORT_10(fn, pfx##10, sfx),	PORT_10(fn, pfx##11, sfx), \
+	PORT_10(fn, pfx##12, sfx),	PORT_10(fn, pfx##13, sfx), \
+	PORT_10(fn, pfx##14, sfx),	PORT_10(fn, pfx##15, sfx), \
+	PORT_10(fn, pfx##16, sfx),	PORT_10(fn, pfx##17, sfx), \
+	PORT_10(fn, pfx##18, sfx),	PORT_1(fn, pfx##190, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -381,108 +367,124 @@
 	PINMUX_MARK_END,
 };
 
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr)							\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr)				     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
+	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
+	PORT_DATA_O(2),			PORT_DATA_I_PD(3),
+	PORT_DATA_I_PD(4),		PORT_DATA_I_PD(5),
+	PORT_DATA_IO_PU_PD(6),		PORT_DATA_I_PD(7),
+	PORT_DATA_IO_PD(8),		PORT_DATA_O(9),
 
-	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
-	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+	PORT_DATA_O(10),		PORT_DATA_O(11),
+	PORT_DATA_IO_PU_PD(12),		PORT_DATA_IO_PD(13),
+	PORT_DATA_IO_PD(14),		PORT_DATA_O(15),
+	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
+	PORT_DATA_I_PD(18),		PORT_DATA_IO(19),
 
-	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
-	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+	PORT_DATA_IO(20),		PORT_DATA_IO(21),
+	PORT_DATA_IO(22),		PORT_DATA_IO(23),
+	PORT_DATA_IO(24),		PORT_DATA_IO(25),
+	PORT_DATA_IO(26),		PORT_DATA_IO(27),
+	PORT_DATA_IO(28),		PORT_DATA_IO(29),
 
-	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
-	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+	PORT_DATA_IO(30),		PORT_DATA_IO(31),
+	PORT_DATA_IO(32),		PORT_DATA_IO(33),
+	PORT_DATA_IO(34),		PORT_DATA_IO(35),
+	PORT_DATA_IO(36),		PORT_DATA_IO(37),
+	PORT_DATA_IO(38),		PORT_DATA_IO(39),
 
-	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
-	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+	PORT_DATA_IO(40),		PORT_DATA_IO(41),
+	PORT_DATA_IO(42),		PORT_DATA_IO(43),
+	PORT_DATA_IO(44),		PORT_DATA_IO(45),
+	PORT_DATA_IO_PU(46),		PORT_DATA_IO_PU(47),
+	PORT_DATA_IO_PU(48),		PORT_DATA_IO_PU(49),
 
-	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
-	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+	PORT_DATA_IO_PU(50),		PORT_DATA_IO_PU(51),
+	PORT_DATA_IO_PU(52),		PORT_DATA_IO_PU(53),
+	PORT_DATA_IO_PU(54),		PORT_DATA_IO_PU(55),
+	PORT_DATA_IO_PU(56),		PORT_DATA_IO_PU(57),
+	PORT_DATA_IO_PU(58),		PORT_DATA_IO_PU(59),
 
-	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
-	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+	PORT_DATA_IO_PU(60),		PORT_DATA_IO_PU(61),
+	PORT_DATA_IO(62),		PORT_DATA_O(63),
+	PORT_DATA_O(64),		PORT_DATA_IO_PU(65),
+	PORT_DATA_O(66),		PORT_DATA_IO_PU(67),  /*66?*/
+	PORT_DATA_O(68),		PORT_DATA_IO(69),
 
-	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
-	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+	PORT_DATA_IO(70),		PORT_DATA_IO(71),
+	PORT_DATA_O(72),		PORT_DATA_I_PU(73),
+	PORT_DATA_I_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
+	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
+	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
 
-	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
-	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
+	PORT_DATA_IO_PU_PD(82),		PORT_DATA_IO_PU_PD(83),
+	PORT_DATA_IO_PU_PD(84),		PORT_DATA_IO_PU_PD(85),
+	PORT_DATA_IO_PU_PD(86),		PORT_DATA_IO_PU_PD(87),
+	PORT_DATA_IO_PU_PD(88),		PORT_DATA_IO_PU_PD(89),
 
-	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
-	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+	PORT_DATA_IO_PU_PD(90),		PORT_DATA_IO_PU_PD(91),
+	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
+	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
+	PORT_DATA_IO_PU(96),		PORT_DATA_IO_PU_PD(97),
+	PORT_DATA_IO_PU_PD(98),		PORT_DATA_O(99), /*99?*/
 
-	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
-	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+	PORT_DATA_IO_PD(100),		PORT_DATA_IO_PD(101),
+	PORT_DATA_IO_PD(102),		PORT_DATA_IO_PD(103),
+	PORT_DATA_IO_PD(104),		PORT_DATA_IO_PD(105),
+	PORT_DATA_IO_PU(106),		PORT_DATA_IO_PU(107),
+	PORT_DATA_IO_PU(108),		PORT_DATA_IO_PU(109),
 
-	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
-	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+	PORT_DATA_IO_PU(110),		PORT_DATA_IO_PU(111),
+	PORT_DATA_IO_PD(112),		PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PU(114),		PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),		PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118),		PORT_DATA_IO_PU(119),
 
-	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
-	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+	PORT_DATA_IO_PU(120),		PORT_DATA_IO_PD(121),
+	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
+	PORT_DATA_IO_PD(124),		PORT_DATA_IO_PD(125),
+	PORT_DATA_IO_PD(126),		PORT_DATA_IO_PD(127),
+	PORT_DATA_IO_PD(128),		PORT_DATA_IO_PU_PD(129),
 
-	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
-	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+	PORT_DATA_IO_PU_PD(130),	PORT_DATA_IO_PU_PD(131),
+	PORT_DATA_IO_PU_PD(132),	PORT_DATA_IO_PU_PD(133),
+	PORT_DATA_IO_PU_PD(134),	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PD(136),		PORT_DATA_IO_PD(137),
+	PORT_DATA_IO_PD(138),		PORT_DATA_IO_PD(139),
 
-	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
-	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+	PORT_DATA_IO_PD(140),		PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),		PORT_DATA_IO_PU_PD(143),
+	PORT_DATA_IO_PD(144),		PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PD(146),		PORT_DATA_IO_PD(147),
+	PORT_DATA_IO_PD(148),		PORT_DATA_IO_PD(149),
 
-	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
-	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+	PORT_DATA_IO_PD(150),		PORT_DATA_IO_PD(151),
+	PORT_DATA_IO_PU_PD(152),	PORT_DATA_I_PD(153),
+	PORT_DATA_IO_PU_PD(154),	PORT_DATA_I_PD(155),
+	PORT_DATA_IO_PD(156),		PORT_DATA_IO_PD(157),
+	PORT_DATA_I_PD(158),		PORT_DATA_IO_PD(159),
 
-	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
-	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+	PORT_DATA_O(160),		PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
+	PORT_DATA_I_PD(164),		PORT_DATA_IO_PD(165),
+	PORT_DATA_I_PD(166),		PORT_DATA_I_PD(167),
+	PORT_DATA_I_PD(168),		PORT_DATA_I_PD(169),
 
-	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
-	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+	PORT_DATA_I_PD(170),		PORT_DATA_O(171),
+	PORT_DATA_IO_PU_PD(172),	PORT_DATA_IO_PU_PD(173),
+	PORT_DATA_IO_PU_PD(174),	PORT_DATA_IO_PU_PD(175),
+	PORT_DATA_IO_PU_PD(176),	PORT_DATA_IO_PU_PD(177),
+	PORT_DATA_IO_PU_PD(178),	PORT_DATA_O(179),
 
-	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
-	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+	PORT_DATA_IO_PU_PD(180),	PORT_DATA_IO_PU_PD(181),
+	PORT_DATA_IO_PU_PD(182),	PORT_DATA_IO_PU_PD(183),
+	PORT_DATA_IO_PU_PD(184),	PORT_DATA_O(185),
+	PORT_DATA_IO_PU_PD(186),	PORT_DATA_IO_PU_PD(187),
+	PORT_DATA_IO_PU_PD(188),	PORT_DATA_IO_PU_PD(189),
 
-	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
-	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
-	_IO_UD(190),
+	PORT_DATA_IO_PU_PD(190),
 
 	/* IRQ */
 	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
@@ -926,10 +928,6 @@
 	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 
 	/* PORT */
@@ -1201,22 +1199,6 @@
 	GPIO_FN(SDENC_DV_CLKI),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0,	0xE6051000), /* PORT0CR */
 	PORTCR(1,	0xE6051001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 613e684..2f10511 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -22,84 +22,65 @@
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx)				\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
-	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
-	_1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx),	\
+	PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx),	\
+	PORT_1(fn, pfx##264, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
-	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
-	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
-	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
-	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
-	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
-	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
-	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
-	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
-	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
 
 	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
 	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@@ -360,45 +341,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 	/* 55-1 (GPIO) */
@@ -1078,13 +1020,9 @@
 	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT_265(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
@@ -1362,23 +1300,6 @@
 	GPIO_FN(RESETOUTS),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)	\
-	0, (out), (in), 0,	\
-		0, 0, 0, 0,	\
-		0, 0, (in_pd), 0,	\
-		0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
-			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,	\
-				PORT##nr##_FN2, PORT##nr##_FN3,	\
-				PORT##nr##_FN4, PORT##nr##_FN5,	\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 3eed44e..e05634c 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -22,84 +22,73 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <mach/sh73a0.h>
+#include <mach/irqs.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx)				\
-	_10(fn, pfx,    sfx), _10(fn, pfx##1, sfx),	\
-	_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx),	\
-	_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx),	\
-	_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx),	\
-	_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx),	\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx),	\
-	_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx),	\
-	_1(fn, pfx##282, sfx),				\
-	_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx),	\
-	_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
+	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
+	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
+	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
+	PORT_1(fn, pfx##282, sfx),				\
+	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
+	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_310(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_310(IN),			/* PORT0_IN -> PORT309_IN */
+	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_310(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_310(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_310(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_310(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
-	PORT_310(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
-	PORT_310(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
-	PORT_310(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
-	PORT_310(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
-	PORT_310(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
-	PORT_310(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
-	PORT_310(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
-	PORT_310(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
-	PORT_310(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
 
 	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
 	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@@ -488,13 +477,34 @@
 	KEYIN5_PU_MARK,
 	KEYIN6_PU_MARK,
 	KEYIN7_PU_MARK,
+	SDHICD0_PU_MARK,
+	SDHID0_0_PU_MARK,
+	SDHID0_1_PU_MARK,
+	SDHID0_2_PU_MARK,
+	SDHID0_3_PU_MARK,
+	SDHICMD0_PU_MARK,
+	SDHIWP0_PU_MARK,
 	SDHID1_0_PU_MARK,
 	SDHID1_1_PU_MARK,
 	SDHID1_2_PU_MARK,
 	SDHID1_3_PU_MARK,
 	SDHICMD1_PU_MARK,
+	SDHID2_0_PU_MARK,
+	SDHID2_1_PU_MARK,
+	SDHID2_2_PU_MARK,
+	SDHID2_3_PU_MARK,
+	SDHICMD2_PU_MARK,
 	MMCCMD0_PU_MARK,
 	MMCCMD1_PU_MARK,
+	MMCD0_0_PU_MARK,
+	MMCD0_1_PU_MARK,
+	MMCD0_2_PU_MARK,
+	MMCD0_3_PU_MARK,
+	MMCD0_4_PU_MARK,
+	MMCD0_5_PU_MARK,
+	MMCD0_6_PU_MARK,
+	MMCD0_7_PU_MARK,
+	FSIBISLD_PU_MARK,
 	FSIACK_PU_MARK,
 	FSIAILR_PU_MARK,
 	FSIAIBT_PU_MARK,
@@ -503,45 +513,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 
@@ -1387,19 +1358,28 @@
 	PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
 	PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
 	PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
+		MSEL4CR_MSEL15_0), \
 	PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
-	PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
+		MSEL4CR_MSEL15_0), \
 	PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
-	PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
+		MSEL4CR_MSEL15_0), \
 	PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
-	PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
+		MSEL4CR_MSEL15_0), \
 	PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
-	PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
+		MSEL4CR_MSEL15_0),
 	PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
 	PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
 	PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
@@ -1516,28 +1496,55 @@
 	PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
 	PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
 
-	PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
-	PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
-	PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
-	PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
-	PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
+	PINMUX_DATA(SDHICD0_PU_MARK,  PORT251_FN1, PORT251_IN_PU),
+	PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
+	PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
+	PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
+	PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
+	PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
+	PINMUX_DATA(SDHIWP0_PU_MARK,  PORT257_FN1, PORT256_IN_PU),
+	PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
+	PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
+	PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
+	PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
+	PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
+	PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
+	PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
+	PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
+	PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
+	PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
 
 	PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
 		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
+	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
 		MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MMCD0_0_PU_MARK,
+		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_PU_MARK,
+		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_PU_MARK,
+		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_PU_MARK,
+		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_PU_MARK,
+		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_5_PU_MARK,
+		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_6_PU_MARK,
+		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_7_PU_MARK,
+		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
+	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
 	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
 	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
 	PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
 	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
-	GPIO_PORT_310(),
+	GPIO_PORT_ALL(),
 
 	/* Table 25-1 (Functions 0-7) */
 	GPIO_FN(VBUS_0),
@@ -2181,31 +2188,39 @@
 	GPIO_FN(KEYIN5_PU),
 	GPIO_FN(KEYIN6_PU),
 	GPIO_FN(KEYIN7_PU),
+	GPIO_FN(SDHICD0_PU),
+	GPIO_FN(SDHID0_0_PU),
+	GPIO_FN(SDHID0_1_PU),
+	GPIO_FN(SDHID0_2_PU),
+	GPIO_FN(SDHID0_3_PU),
+	GPIO_FN(SDHICMD0_PU),
+	GPIO_FN(SDHIWP0_PU),
 	GPIO_FN(SDHID1_0_PU),
 	GPIO_FN(SDHID1_1_PU),
 	GPIO_FN(SDHID1_2_PU),
 	GPIO_FN(SDHID1_3_PU),
 	GPIO_FN(SDHICMD1_PU),
+	GPIO_FN(SDHID2_0_PU),
+	GPIO_FN(SDHID2_1_PU),
+	GPIO_FN(SDHID2_2_PU),
+	GPIO_FN(SDHID2_3_PU),
+	GPIO_FN(SDHICMD2_PU),
 	GPIO_FN(MMCCMD0_PU),
 	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(MMCD0_0_PU),
+	GPIO_FN(MMCD0_1_PU),
+	GPIO_FN(MMCD0_2_PU),
+	GPIO_FN(MMCD0_3_PU),
+	GPIO_FN(MMCD0_4_PU),
+	GPIO_FN(MMCD0_5_PU),
+	GPIO_FN(MMCD0_6_PU),
+	GPIO_FN(MMCD0_7_PU),
 	GPIO_FN(FSIACK_PU),
 	GPIO_FN(FSIAILR_PU),
 	GPIO_FN(FSIAIBT_PU),
 	GPIO_FN(FSIAISLD_PU),
 };
 
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
-		0, \
-		/*0001*/ PORT##nr##_OUT , \
-		/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
-		/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
-		/*1110*/ PORT##nr##_IN_PU, 0, \
-		PORT##nr##_FN0, PORT##nr##_FN1,	PORT##nr##_FN2, \
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5, \
-		PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
@@ -2718,6 +2733,45 @@
 	{ },
 };
 
+/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
+#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
+};
+
 static struct pinmux_info sh73a0_pinmux_info = {
 	.name = "sh73a0_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -2738,6 +2792,9 @@
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh73a0_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index e4e485f..c49a833 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -21,9 +21,11 @@
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+
 static unsigned int __init shmobile_smp_get_core_count(void)
 {
-	if (machine_is_ag5evm())
+	if (is_sh73a0())
 		return sh73a0_get_core_count();
 
 	return 1;
@@ -31,7 +33,7 @@
 
 static void __init shmobile_smp_prepare_cpus(void)
 {
-	if (machine_is_ag5evm())
+	if (is_sh73a0())
 		sh73a0_smp_prepare_cpus();
 }
 
@@ -39,13 +41,13 @@
 {
 	trace_hardirqs_off();
 
-	if (machine_is_ag5evm())
+	if (is_sh73a0())
 		sh73a0_secondary_init(cpu);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	if (machine_is_ag5evm())
+	if (is_sh73a0())
 		return sh73a0_boot_secondary(cpu);
 
 	return -ENOSYS;
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 7961273..34bbcbf 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/bitrev.h>
+#include <linux/console.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
@@ -106,9 +107,8 @@
 	return 0;
 }
 
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 {
-	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
 	unsigned int mask = 1 << sh7372_pd->bit_shift;
 	unsigned int retry_count;
 	int ret = 0;
@@ -123,13 +123,13 @@
 
 	for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
 		if (!(__raw_readl(SWUCR) & mask))
-			goto out;
+			break;
 		if (retry_count > PSTR_RETRIES)
 			udelay(PSTR_DELAY_US);
 		else
 			cpu_relax();
 	}
-	if (__raw_readl(SWUCR) & mask)
+	if (!retry_count)
 		ret = -EIO;
 
 	if (!sh7372_pd->no_debug)
@@ -137,12 +137,17 @@
 			 mask, __raw_readl(PSTR));
 
  out:
-	if (ret == 0 && sh7372_pd->resume)
+	if (ret == 0 && sh7372_pd->resume && do_resume)
 		sh7372_pd->resume();
 
 	return ret;
 }
 
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+	 return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
 static void sh7372_a4r_suspend(void)
 {
 	sh7372_intcs_suspend();
@@ -174,7 +179,7 @@
 	genpd->active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
 	genpd->power_on = pd_power_up;
-	genpd->power_on(&sh7372_pd->genpd);
+	__pd_power_up(sh7372_pd, false);
 }
 
 void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@@ -227,11 +232,23 @@
 	.no_debug = true,
 };
 
+static void sh7372_a3sp_init(void)
+{
+	/* serial consoles make use of SCIF hardware located in A3SP,
+	 * keep such power domain on if "no_console_suspend" is set.
+	 */
+	sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
 struct sh7372_pm_domain sh7372_a3sg = {
 	.bit_shift = 13,
 };
 
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
 
 #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
 static int sh7372_do_idle_core_standby(unsigned long unused)
@@ -402,22 +419,18 @@
 
 #ifdef CONFIG_CPU_IDLE
 
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
 {
-	struct cpuidle_state *state;
-	int i = dev->state_count;
+	struct cpuidle_state *state = &drv->states[drv->state_count];
 
-	state = &dev->states[i];
 	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 10;
 	state->target_residency = 20 + 10;
-	state->power_usage = 1; /* perhaps not */
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+	state->flags = CPUIDLE_FLAG_TIME_VALID;
+	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
 
-	dev->state_count = i + 1;
+	drv->state_count++;
 }
 
 static void sh7372_cpuidle_init(void)
@@ -469,6 +482,8 @@
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
+	sh7372_a3sp_init();
+
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index d368f8d..74743ad 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -101,6 +101,13 @@
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, tegra_dt_match_table,
+				tegra20_auxdata_lookup, NULL);
+
 	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
 		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
 			pinmux_configs[i].init();
@@ -110,12 +117,6 @@
 
 	WARN(i == ARRAY_SIZE(pinmux_configs),
 		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
 }
 
 static const char * tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index e99b456..7a4a26d 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -161,7 +163,9 @@
 
 void harmony_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index fb20894..be30e21 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -158,7 +160,9 @@
 
 void paz00_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index fbce31d..b1c2972 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 #include <mach/pinmux-t2.h>
@@ -191,6 +192,7 @@
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
+	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
 	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
@@ -218,7 +220,9 @@
 
 void __init seaboard_common_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 4969dd2..7ab719d 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 
@@ -157,7 +158,9 @@
 
 void __init trimslice_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index f5aa173..97ef3e5 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -32,6 +32,7 @@
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include <asm/sizes.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index f0394ba..5140dee 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -256,57 +256,8 @@
 };
 #endif
 
-#ifdef CONFIG_AB3550_CORE
-static struct abx500_init_settings ab3550_init_settings[] = {
-	{
-		.bank = 0,
-		.reg = AB3550_IMR1,
-		.setting = 0xff
-	},
-	{
-		.bank = 0,
-		.reg = AB3550_IMR2,
-		.setting = 0xff
-	},
-	{
-		.bank = 0,
-		.reg = AB3550_IMR3,
-		.setting = 0xff
-	},
-	{
-		.bank = 0,
-		.reg = AB3550_IMR4,
-		.setting = 0xff
-	},
-	{
-		.bank = 0,
-		.reg = AB3550_IMR5,
-		/* The two most significant bits are not used */
-		.setting = 0x3f
-	},
-};
-
-static struct ab3550_platform_data ab3550_plf_data = {
-	.irq = {
-		.base = IRQ_AB3550_BASE,
-		.count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
-	},
-	.dev_data = {
-	},
-	.init_settings = ab3550_init_settings,
-	.init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
-};
-#endif
-
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#if defined(CONFIG_AB3550_CORE)
-	{
-		.type = "ab3550",
-		.addr = 0x4A,
-		.irq = IRQ_U300_IRQ0_EXT,
-		.platform_data = &ab3550_plf_data,
-	},
-#elif defined(CONFIG_AB3100_CORE)
+#ifdef CONFIG_AB3100_CORE
 	{
 		.type = "ab3100",
 		.addr = 0x48,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index d270fea..db3fbfa 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -117,14 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-/* Optional AB3550 mixsig chip */
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE			(IRQ_U300_GPIO_END)
-#define IRQ_AB3550_END			(IRQ_AB3550_BASE + 38)
-#else
-#define IRQ_AB3550_END			(IRQ_U300_GPIO_END)
-#endif
-
-#define NR_IRQS				(IRQ_AB3550_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END)
 
 #endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e014aa7..82025ba 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -10,6 +10,7 @@
 #include <linux/amba/bus.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab5500/ab5500.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -87,7 +88,6 @@
 	.brt_val = 0x7F,	/* Max brightness */
 };
 
-
 static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	{
 		/* Backlight */
@@ -101,6 +101,30 @@
 	db5500_add_i2c2(&u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
+
+static struct ab5500_platform_data ab5500_plf_data = {
+	.irq = {
+		.base = 0,
+		.count = 0,
+	},
+	.init_settings = NULL,
+	.init_settings_sz = 0,
+	.pm_power_off = false,
+};
+
+static struct platform_device ab5500_device = {
+	.name = "ab5500-core",
+	.id = 0,
+	.dev = {
+		.platform_data = &ab5500_plf_data,
+	},
+	.num_resources = 0,
+};
+
+static struct platform_device *u5500_platform_devices[] __initdata = {
+	&ab5500_device,
+};
+
 static void __init u5500_uart_init(void)
 {
 	db5500_add_uart0(NULL);
@@ -115,6 +139,9 @@
 	u5500_i2c_init();
 	u5500_sdi_init();
 	u5500_uart_init();
+
+	platform_add_devices(u5500_platform_devices,
+		ARRAY_SIZE(u5500_platform_devices));
 }
 
 MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1405d0e..f418574 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -47,6 +47,6 @@
 	if (cpu_is_u5500())
 		db5500_prcmu_early_init();
 	if (cpu_is_u8500())
-		prcmu_early_init();
+		db8500_prcmu_early_init();
 	clk_init();
 }
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 7a1fa6a..5b0c38a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -422,7 +422,7 @@
 
 /* LCD controller*/
 
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
 	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
 	[0] = {
 		.type		= LCM_DCCS_VA_SRC_RGB565,
@@ -445,7 +445,7 @@
 	},
 };
 
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
 #if defined(CONFIG_GPM1040A0_320X240)
 	.displays		= &nuc900_lcd_info[0],
 #else
diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h
index 94c0e71..23ef1f5 100644
--- a/arch/arm/mach-w90x900/include/mach/mfp.h
+++ b/arch/arm/mach-w90x900/include/mach/mfp.h
@@ -19,6 +19,7 @@
 extern void mfp_set_groupf(struct device *dev);
 extern void mfp_set_groupc(struct device *dev);
 extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
index bd94819..2c4e0c1 100644
--- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+++ b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SPI_H
 #define __ASM_ARCH_SPI_H
 
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
 
 struct nuc900_spi_info {
 	unsigned int num_cs;
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
index fb7fb62..9dd7461 100644
--- a/arch/arm/mach-w90x900/mfp.c
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -26,10 +26,8 @@
 #define REG_MFSEL	(W90X900_VA_GCR + 0xC)
 
 #define GPSELF		(0x01 << 1)
-
 #define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
+#define GPSELD		(0x0f << 4)
 
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
@@ -37,11 +35,16 @@
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
 #define GPIOG22TO23	(0x03 << 22)
+#define GPIOG18TO20	(0x07 << 18)
 
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 #define ENAC97		(0x02 << 22)
+#define ENSD1		(0x02 << 18)
+#define ENSD0		(0x0a << 4)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -127,16 +130,19 @@
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
 {
 	unsigned long mfpen;
 	const char *dev_id;
 
-	BUG_ON(!dev);
+	BUG_ON((!dev) && (!subname));
 
 	mutex_lock(&mfp_mutex);
 
-	dev_id = dev_name(dev);
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
 
 	mfpen = __raw_readl(REG_MFSEL);
 
@@ -152,6 +158,9 @@
 	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
 		mfpen &= ~(GPIOG22TO23);
 		mfpen |= ENAC97;/*enable AC97*/
+	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+		mfpen &= ~(GPIOG18TO20);
+		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
@@ -162,3 +171,30 @@
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON((!dev) && (!subname));
+
+	mutex_lock(&mfp_mutex);
+
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+		mfpen &= ~GPSELD;/*enable sd0*/
+		mfpen |= ENSD0;
+	} else
+		mfpen &= (~GPSELD);
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 8ac9e9f..b1e192b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -61,7 +61,7 @@
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_ARM_ERRATA_753970
+#ifdef CONFIG_PL310_ERRATA_753970
 	/* write to an unmmapped register */
 	writel_relaxed(0, base + L2X0_DUMMY_REG);
 #else
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4e7f6c..1aa664a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -168,7 +168,7 @@
 	pte_t *pte;
 	int i = 0;
 	unsigned long base = consistent_base;
-	unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
@@ -332,6 +332,15 @@
 	struct page *page;
 	void *addr;
 
+	/*
+	 * Following is a work-around (a.k.a. hack) to prevent pages
+	 * with __GFP_COMP being passed to split_page() which cannot
+	 * handle them.  The real problem is that this flag probably
+	 * should be 0 on ARM as it is not supported on this
+	 * platform; see CONFIG_HUGETLBFS.
+	 */
+	gfp &= ~(__GFP_COMP);
+
 	*handle = ~0;
 	size = PAGE_ALIGN(size);
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 7cab791..7599e26 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -8,7 +8,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 04e9a92..fbdd12e 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/mman.h>
+#include <linux/export.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
 #include <linux/of_fdt.h>
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 74be05f..44b628e 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -9,8 +9,7 @@
 #include <linux/io.h>
 #include <linux/personality.h>
 #include <linux/random.h>
-#include <asm/cputype.h>
-#include <asm/system.h>
+#include <asm/cachetype.h>
 
 #define COLOUR_ALIGN(addr,pgoff)		\
 	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
@@ -32,25 +31,15 @@
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-	unsigned int cache_type;
-	int do_align = 0, aliasing = 0;
+	int do_align = 0;
+	int aliasing = cache_is_vipt_aliasing();
 
 	/*
 	 * We only need to do colour alignment if either the I or D
-	 * caches alias.  This is indicated by bits 9 and 21 of the
-	 * cache type register.
+	 * caches alias.
 	 */
-	cache_type = read_cpuid_cachetype();
-	if (cache_type != read_cpuid_id()) {
-		aliasing = (cache_type | cache_type >> 12) & (1 << 11);
-		if (aliasing)
-			do_align = filp || flags & MAP_SHARED;
-	}
-#else
-#define do_align 0
-#define aliasing 0
-#endif
+	if (aliasing)
+		do_align = filp || (flags & MAP_SHARED);
 
 	/*
 	 * We enforce the MAP_FIXED case.
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
index 640e498..e4de9be 100644
--- a/arch/arm/plat-iop/gpio.c
+++ b/arch/arm/plat-iop/gpio.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 #include <asm/hardware/iop3xx.h>
 
 void gpio_line_config(int line, int direction)
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 7cdc516..568dd02 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a08a951..b3a1f2b3 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,7 +10,7 @@
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
@@ -26,7 +26,7 @@
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 8875fb4..55f1569 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 #include <mach/hardware.h>
 
 #include "irq-common.h"
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
index b3b8eed..12f8f81 100644
--- a/arch/arm/plat-mxc/gic.c
+++ b/arch/arm/plat-mxc/gic.c
@@ -28,21 +28,14 @@
 		if (irqnr == 1023)
 			break;
 
-		if (irqnr > 29 && irqnr < 1021)
+		if (irqnr > 15 && irqnr < 1021)
 			handle_IRQ(irqnr, regs);
 #ifdef CONFIG_SMP
-		else if (irqnr < 16) {
+		else {
 			writel_relaxed(irqstat, gic_cpu_base_addr +
 						GIC_CPU_EOI);
 			handle_IPI(irqnr, regs);
 		}
 #endif
-#ifdef CONFIG_LOCAL_TIMERS
-		else if (irqnr == 29) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_local_timer(regs);
-		}
-#endif
 	} while (1);
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 83b745a..c75f254 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -85,7 +85,6 @@
 };
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void (*imx_idle)(void);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
@@ -133,4 +132,5 @@
 extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_pm_init(void);
+extern void imx6q_clock_map_io(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 9fe0dfc..ca5cf26 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -25,6 +25,3 @@
 
 	.macro test_for_ipi, irqnr, irqstat, base, tmp
 	.endm
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	.endm
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 00a7819..a4d36d6 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -50,20 +50,6 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
-#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
-#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
-#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
-#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
-#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
-#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
-#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
-#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
-#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
-#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
-#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
-#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
-#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
-
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cf88b35..b9895d2 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,14 +17,9 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-extern void (*imx_idle)(void);
-
 static inline void arch_idle(void)
 {
-	if (imx_idle != NULL)
-		(imx_idle)();
-	else
-		cpu_do_idle();
+	cpu_do_idle();
 }
 
 void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 9dad8dc..d65fb31 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -28,8 +29,8 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-void (*imx_idle)(void) = NULL;
 void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+EXPORT_SYMBOL_GPL(imx_ioremap);
 
 static void __iomem *wdog_base;
 
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index e993a184..a3c164c 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 3ba4d11..567e4b5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 2def4e1..af3b92b 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -35,6 +35,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/err.h>
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 679cbd4..db071bc 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -184,7 +184,7 @@
 			NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
-	return PTR_ERR(pdev);
+	return PTR_RET(pdev);
 }
 #else
 static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 197ca03..eb73ab4 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -165,8 +165,8 @@
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	u8			flags;
 #  endif
+	u8			flags;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index c50df48..3ff3e36 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 
 #include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
 
 struct sys_timer;
 
@@ -55,6 +56,8 @@
 void ti816x_init_early(void);
 void omap4430_init_early(void);
 
+extern int omap_dss_reset(struct omap_hwmod *);
+
 void omap_sram_init(void);
 
 /*
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 2f90269..408a12f 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -399,6 +399,13 @@
 
 /*
  * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ *    family have OS-level control over the I/O chain clock.  This is
+ *    to avoid a window during which wakeups could potentially be lost
+ *    during powerdomain transitions.  If this bit is set, it
+ *    indicates that the chip does support OS-level control of this
+ *    feature.
  */
 extern u32 omap_features;
 
@@ -410,9 +417,10 @@
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
 #define OMAP3_HAS_IO_WAKEUP		BIT(6)
 #define OMAP3_HAS_SDRC			BIT(7)
-#define OMAP4_HAS_MPU_1GHZ		BIT(8)
-#define OMAP4_HAS_MPU_1_2GHZ		BIT(9)
-#define OMAP4_HAS_MPU_1_5GHZ		BIT(10)
+#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
+#define OMAP4_HAS_MPU_1GHZ		BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
 
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
@@ -429,12 +437,11 @@
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
 OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
 OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
 
 /*
  * Runtime detection of OMAP4 features
  */
-extern u32 omap_features;
-
 #define OMAP4_HAS_FEATURE(feat, flag)			\
 static inline unsigned int omap4_has_ ##feat(void)	\
 {							\
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index d11025e..9418f00 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -104,7 +104,7 @@
 
 	bool loses_context;
 
-	u32 (*get_context_loss_count)(struct device *dev);
+	int (*get_context_loss_count)(struct device *dev);
 };
 
 struct omap_dm_timer *omap_dm_timer_request(void);
@@ -279,7 +279,7 @@
 	struct platform_device *pdev;
 	struct list_head node;
 
-	u32 (*get_context_loss_count)(struct device *dev);
+	int (*get_context_loss_count)(struct device *dev);
 };
 
 int omap_dm_timer_prepare(struct omap_dm_timer *timer);
diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
deleted file mode 100644
index b53055b..0000000
--- a/arch/arm/plat-omap/include/plat/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  -------
- *
- *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
- *  					original version based in sa1100 driver
- *  					and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <plat/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <plat/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE	(1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
-	char *id;		/* identification string */
-	int stream_id;		/* numeric identification */
-	int dma_dev;		/* dma number of that device */
-	int *lch;		/* Chain of channels this stream is linked to */
-	char started;		/* to store if the chain was started or not */
-	int dma_q_head;		/* DMA Channel Q Head */
-	int dma_q_tail;		/* DMA Channel Q Tail */
-	char dma_q_count;	/* DMA Channel Q Count */
-	int active:1;		/* we are using this stream for transfer now */
-	int period;		/* current transfer period */
-	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
-	struct snd_pcm_substream *stream;	/* the pcm stream */
-	unsigned linked:1;	/* dma channels linked */
-	int offset;		/* store start position of the last period in the alsa buffer */
-	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
-	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
-	struct snd_card *card;
-	struct snd_pcm *pcm;
-	long samplerate;
-	struct audio_stream s[2];	/* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
-	char 	*name;
-	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
-	struct	snd_pcm_hardware *snd_omap_alsa_playback;
-	struct	snd_pcm_hardware *snd_omap_alsa_capture;
-	void	(*codec_configure_dev)(void);
-	void	(*codec_set_samplerate)(long);
-	void	(*codec_clock_setup)(void);
-	int	(*codec_clock_on)(void);
-	int 	(*codec_clock_off)(void);
-	int	(*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend	NULL
-#define snd_omap_alsa_resume	NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 0840df8..67faa7b 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -342,9 +342,9 @@
  * driver must restore device context.   If the number of context losses
  * exceeds the maximum positive integer, the function will wrap to 0 and
  * continue counting.  Returns the number of context losses for this device,
- * or zero upon error.
+ * or negative value upon error.
  */
-u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+int omap_pm_get_dev_context_loss_count(struct device *dev);
 
 void omap_pm_enable_off_mode(void);
 void omap_pm_disable_off_mode(void);
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 12c5b0c..51423d2 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -107,7 +107,7 @@
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
 struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-u32 omap_device_get_context_loss_count(struct platform_device *pdev);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
 
 /* Other */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 5419f1a..8b372ed 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -600,7 +600,7 @@
 				 void *user);
 
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 
 int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 69ddc9f..ad80112 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -29,6 +29,7 @@
 #include <linux/kfifo.h>
 #include <linux/err.h>
 #include <linux/notifier.h>
+#include <linux/module.h>
 
 #include <plat/mailbox.h>
 
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index b0471bb2..3dc3801 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -27,7 +27,7 @@
 #include <plat/omap_device.h>
 
 static bool off_mode_enabled;
-static u32 dummy_context_loss_counter;
+static int dummy_context_loss_counter;
 
 /*
  * Device-driver-originated constraints (via board-*.c files)
@@ -311,22 +311,32 @@
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	u32 count;
+	int count;
 
 	if (WARN_ON(!dev))
-		return 0;
+		return -ENODEV;
 
 	if (dev->parent == &omap_device_parent) {
 		count = omap_device_get_context_loss_count(pdev);
 	} else {
 		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
 			  dev_name(dev));
-		if (off_mode_enabled)
-			dummy_context_loss_counter++;
+
 		count = dummy_context_loss_counter;
+
+		if (off_mode_enabled) {
+			count++;
+			/*
+			 * Context loss count has to be a non-negative value.
+			 * Clear the sign bit to get a value range from 0 to
+			 * INT_MAX.
+			 */
+			count &= INT_MAX;
+			dummy_context_loss_counter = count;
+		}
 	}
 
 	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
@@ -337,7 +347,7 @@
 
 #else
 
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
 {
 	return dummy_context_loss_counter;
 }
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index cd90bed..e8d9869 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -78,6 +78,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/err.h>
@@ -426,7 +427,7 @@
  * return the context loss counter for that hwmod, otherwise return
  * zero.
  */
-u32 omap_device_get_context_loss_count(struct platform_device *pdev)
+int omap_device_get_context_loss_count(struct platform_device *pdev)
 {
 	struct omap_device *od;
 	u32 ret = 0;
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 442301f..c42f39f 100644
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
@@ -41,6 +41,19 @@
 	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
 };
 
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT		(2)
 struct pxa3xx_nand_platform_data {
 
 	/* the data flash bus is shared between the Static Memory
@@ -52,8 +65,11 @@
 	/* allow platform code to keep OBM/bootloader defined NFC config */
 	int	keep_config;
 
-	const struct mtd_partition		*parts;
-	unsigned int				nr_parts;
+	/* indicate how many chip selects will be used */
+	int	num_cs;
+
+	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
+	unsigned int				nr_parts[NUM_CHIP_SELECT];
 
 	const struct pxa3xx_nand_flash * 	flash;
 	size_t					num_flash;
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 8c5b302..d8973ac 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,6 @@
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEV_NAND
-	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 0291bd6..b2b0112 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -14,9 +14,7 @@
 
 obj-y				+= cpu.o
 obj-y				+= irq.o
-obj-y				+= devs.o
-obj-y				+= gpio.o
-obj-y				+= gpiolib.o
+obj-y				+= dev-uart.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
index a927666..c7adad0 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -12,7 +12,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
diff --git a/arch/arm/plat-s3c24xx/dev-uart.c b/arch/arm/plat-s3c24xx/dev-uart.c
new file mode 100644
index 0000000..9ab22e6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/dev-uart.c
@@ -0,0 +1,100 @@
+/* linux/arch/arm/plat-s3c24xx/dev-uart.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX UART resource and platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART0,
+		.end   = S3C2410_PA_UART0 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX0,
+		.end   = IRQ_S3CUART_ERR0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART1,
+		.end   = S3C2410_PA_UART1 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX1,
+		.end   = IRQ_S3CUART_ERR1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+	[0] = {
+		.start = S3C2410_PA_UART2,
+		.end   = S3C2410_PA_UART2 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX2,
+		.end   = IRQ_S3CUART_ERR2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+	[0] = {
+		.start = S3C2443_PA_UART3,
+		.end   = S3C2443_PA_UART3 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX3,
+		.end   = IRQ_S3CUART_ERR3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c2410_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c2410_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c2410_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c2410_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
+	},
+};
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
deleted file mode 100644
index a76bf2d..0000000
--- a/arch/arm/plat-s3c24xx/devs.c
+++ /dev/null
@@ -1,528 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/devs.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <plat/udc.h>
-#include <plat/mci.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-spi.h>
-#include <plat/ts.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART0,
-		.end   = S3C2410_PA_UART0 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX0,
-		.end   = IRQ_S3CUART_ERR0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART1,
-		.end   = S3C2410_PA_UART1 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX1,
-		.end   = IRQ_S3CUART_ERR1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART2,
-		.end   = S3C2410_PA_UART2 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX2,
-		.end   = IRQ_S3CUART_ERR2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart3_resource[] = {
-	[0] = {
-		.start = S3C2443_PA_UART3,
-		.end   = S3C2443_PA_UART3 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX3,
-		.end   = IRQ_S3CUART_ERR3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c2410_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
-	},
-};
-
-/* LCD Controller */
-
-static struct resource s3c_lcd_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_LCD,
-		.end   = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD,
-		.end   = IRQ_LCD,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_lcd = {
-	.name		  = "s3c2410-lcd",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_lcd_resource),
-	.resource	  = s3c_lcd_resource,
-	.dev              = {
-		.dma_mask		= &s3c_device_lcd_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_lcd);
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
-	if (npd) {
-		npd->displays = kmemdup(pd->displays,
-			sizeof(struct s3c2410fb_display) * npd->num_displays,
-			GFP_KERNEL);
-		if (!npd->displays)
-			printk(KERN_ERR "no memory for LCD display data\n");
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-
-/* Touchscreen */
-
-static struct resource s3c_ts_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_ADC,
-		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-
-};
-
-struct platform_device s3c_device_ts = {
-	.name		  = "s3c2410-ts",
-	.id		  = -1,
-	.dev.parent	= &s3c_device_adc.dev,
-	.num_resources	  = ARRAY_SIZE(s3c_ts_resource),
-	.resource	  = s3c_ts_resource,
-};
-EXPORT_SYMBOL(s3c_device_ts);
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
-	s3c_set_platdata(hard_s3c2410ts_info,
-			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-
-/* USB Device (Gadget)*/
-
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBDEV,
-		.end   = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		  = "s3c2410-usbgadget",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	  = s3c_usbgadget_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_usbgadget);
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-
-/* USB High Speed 2.0 Device (Gadget) */
-static struct resource s3c_hsudc_resource[] = {
-	[0] = {
-		.start	= S3C2416_PA_HSUDC,
-		.end	= S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USBD,
-		.end	= IRQ_USBD,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsudc = {
-	.name		= "s3c-hsudc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
-	.resource	= s3c_hsudc_resource,
-	.dev		= {
-		.dma_mask		= &s3c_hsudc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-
-/* IIS */
-
-static struct resource s3c_iis_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_IIS,
-		.end   = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static u64 s3c_device_iis_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_iis = {
-	.name		  = "s3c24xx-iis",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_iis_resource),
-	.resource	  = s3c_iis_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_iis_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_iis);
-
-/* RTC */
-
-static struct resource s3c_rtc_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_RTC,
-		.end   = S3C24XX_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_TICK,
-		.end   = IRQ_TICK,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		  = "s3c2410-rtc",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
-	.resource	  = s3c_rtc_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_rtc);
-
-/* ADC */
-
-static struct resource s3c_adc_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_ADC,
-		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_adc = {
-	.name		  = "s3c24xx-adc",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_adc_resource),
-	.resource	  = s3c_adc_resource,
-};
-
-/* SDI */
-
-static struct resource s3c_sdi_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_SDI,
-		.end   = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SDI,
-		.end   = IRQ_SDI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		  = "s3c2410-sdi",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_sdi_resource),
-	.resource	  = s3c_sdi_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_sdi);
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
-			 &s3c_device_sdi);
-}
-
-
-/* SPI (0) */
-
-static struct resource s3c_spi0_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_SPI,
-		.end   = S3C24XX_PA_SPI + 0x1f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi0 = {
-	.name		  = "s3c2410-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c_spi0_resource),
-	.resource	  = s3c_spi0_resource,
-        .dev              = {
-                .dma_mask = &s3c_device_spi0_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
-        }
-};
-
-EXPORT_SYMBOL(s3c_device_spi0);
-
-/* SPI (1) */
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_SPI + S3C2410_SPI1,
-		.end   = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi1 = {
-	.name		  = "s3c2410-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_spi1_resource),
-	.resource	  = s3c_spi1_resource,
-        .dev              = {
-                .dma_mask = &s3c_device_spi1_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
-        }
-};
-
-EXPORT_SYMBOL(s3c_device_spi1);
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* Camif Controller */
-
-static struct resource s3c_camif_resource[] = {
-	[0] = {
-		.start = S3C2440_PA_CAMIF,
-		.end   = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CAM,
-		.end   = IRQ_CAM,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-static u64 s3c_device_camif_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_camif = {
-	.name		  = "s3c2440-camif",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_camif_resource),
-	.resource	  = s3c_camif_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_camif_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_camif);
-
-/* AC97 */
-
-static struct resource s3c_ac97_resource[] = {
-	[0] = {
-		.start = S3C2440_PA_AC97,
-		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3C244x_AC97,
-		.end   = IRQ_S3C244x_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name  = "PCM out",
-		.start = DMACH_PCM_OUT,
-		.end   = DMACH_PCM_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.name  = "PCM in",
-		.start = DMACH_PCM_IN,
-		.end   = DMACH_PCM_IN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.name  = "Mic in",
-		.start = DMACH_MIC_IN,
-		.end   = DMACH_MIC_IN,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
-	.resource	  = s3c_ac97_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_audio_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_ac97);
-
-/* ASoC I2S */
-
-struct platform_device s3c2412_device_iis = {
-	.name		  = "s3c2412-iis",
-	.id		  = -1,
-	.dev              = {
-		.dma_mask = &s3c_device_audio_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c2412_device_iis);
-
-#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 539bd0e..53754bcf 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1094,14 +1094,14 @@
  *
  * configure the dma source/destination hardware type and address
  *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
+ * source:    DMA_FROM_DEVICE: source is hardware
+ *            DMA_TO_DEVICE: source is memory
  *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@
 	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@
 		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		/* source is memory */
 		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
deleted file mode 100644
index 2f3d7c0..0000000
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
deleted file mode 100644
index 243b641..0000000
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4)
-		return IRQ_EINT0 + offset;
-	
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-	
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
-	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 24,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPB(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOB",
-			.ngpio			= 16,
-		},
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPC(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOC",
-			.ngpio			= 16,
-		},
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPD(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOD",
-			.ngpio			= 16,
-		},
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPE(0),
-			.label			= "GPIOE",
-			.owner			= THIS_MODULE,
-			.ngpio			= 16,
-		},
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPF(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOF",
-			.ngpio			= 8,
-			.to_irq			= s3c24xx_gpiolib_bankf_toirq,
-		},
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base			= S3C2410_GPG(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOG",
-			.ngpio			= 16,
-			.to_irq			= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C2410_GPHCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPH(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOH",
-			.ngpio			= 11,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPJ(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOJ",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPK(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOK",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPL(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOL",
-			.ngpio			= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPM(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOM",
-			.ngpio			= 2,
-		},
-	},
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s3c24xx_gpios;
-	int gpn;
-
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-
-		s3c_gpiolib_add(chip);
-	}
-
-	return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83..0000000
--- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
deleted file mode 100644
index a087de2..0000000
--- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << (1 + tcfg1);
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 0;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div) - 1;
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
deleted file mode 100644
index 005729a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/pll.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - common pll registers and code
- */
-
-#define S3C24XX_PLLCON_MDIVSHIFT	12
-#define S3C24XX_PLLCON_PDIVSHIFT	4
-#define S3C24XX_PLLCON_SDIVSHIFT	0
-#define S3C24XX_PLLCON_MDIVMASK		((1<<(1+(19-12)))-1)
-#define S3C24XX_PLLCON_PDIVMASK		((1<<5)-1)
-#define S3C24XX_PLLCON_SDIVMASK		3
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C24XX_PLLCON_MDIVMASK;
-	pdiv &= S3C24XX_PLLCON_PDIVMASK;
-	sdiv &= S3C24XX_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_M_SHIFT	(14)
-#define S3C2416_PLL_P_SHIFT	(5)
-#define S3C2416_PLL_S_MASK	(7)
-#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
-#define S3C2416_PLL_P_MASK	(63)
-
-static inline unsigned int
-s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int m, p, s;
-	uint64_t fvco;
-
-	m = pllval >> S3C2416_PLL_M_SHIFT;
-	p = pllval >> S3C2416_PLL_P_SHIFT;
-
-	s = pllval & S3C2416_PLL_S_MASK;
-	m &= S3C2416_PLL_M_MASK;
-	p &= S3C2416_PLL_P_MASK;
-
-	fvco = (uint64_t)baseclk * m;
-	do_div(fvco, (p << s));
-
-	return (unsigned int)fvco;
-}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
deleted file mode 100644
index 1b0f4c3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1<<0)
-#define S3C2410_DISRCC_APB		(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP		(1<<2)
-#define S3C2410_DMASKTRIG_ON		(1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
-
-#define S3C2410_DCON_DEMAND		(0<<31)
-#define S3C2410_DCON_HANDSHAKE		(1<<31)
-#define S3C2410_DCON_SYNC_PCLK		(0<<30)
-#define S3C2410_DCON_SYNC_HCLK		(1<<30)
-
-#define S3C2410_DCON_INTREQ		(1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
-#define S3C2410_DCON_CH0_UART0		(1<<24)
-#define S3C2410_DCON_CH0_SDI		(2<<24)
-#define S3C2410_DCON_CH0_TIMER		(3<<24)
-#define S3C2410_DCON_CH0_USBEP1		(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
-#define S3C2410_DCON_CH1_UART1		(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
-#define S3C2410_DCON_CH1_SPI		(3<<24)
-#define S3C2410_DCON_CH1_USBEP2		(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
-#define S3C2410_DCON_CH2_SDI		(2<<24)
-#define S3C2410_DCON_CH2_TIMER		(3<<24)
-#define S3C2410_DCON_CH2_USBEP3		(4<<24)
-
-#define S3C2410_DCON_CH3_UART2		(0<<24)
-#define S3C2410_DCON_CH3_SDI		(1<<24)
-#define S3C2410_DCON_CH3_SPI		(2<<24)
-#define S3C2410_DCON_CH3_TIMER		(3<<24)
-#define S3C2410_DCON_CH3_USBEP4		(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7<<24)
-
-#define S3C2410_DCON_BYTE		(0<<20)
-#define S3C2410_DCON_HALFWORD		(1<<20)
-#define S3C2410_DCON_WORD		(2<<20)
-
-#define S3C2410_DCON_AUTORELOAD		(0<<22)
-#define S3C2410_DCON_NORELOAD		(1<<22)
-#define S3C2410_DCON_HWTRIG		(1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT		(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
-#define S3C2440_DCON_CH0_PCMIN		(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
-#define S3C2440_DCON_CH1_SDI		(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5<<24)
-#define S3C2440_DCON_CH2_MICIN		(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN		(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
deleted file mode 100644
index cc44e0e..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON	 (0x00)
-
-#define S3C2410_IISCON_LRINDEX	  (1<<8)
-#define S3C2410_IISCON_TXFIFORDY  (1<<7)
-#define S3C2410_IISCON_RXFIFORDY  (1<<6)
-#define S3C2410_IISCON_TXDMAEN	  (1<<5)
-#define S3C2410_IISCON_RXDMAEN	  (1<<4)
-#define S3C2410_IISCON_TXIDLE	  (1<<3)
-#define S3C2410_IISCON_RXIDLE	  (1<<2)
-#define S3C2410_IISCON_PSCEN	  (1<<1)
-#define S3C2410_IISCON_IISEN	  (1<<0)
-
-#define S3C2410_IISMOD	 (0x04)
-
-#define S3C2440_IISMOD_MPLL	  (1<<9)
-#define S3C2410_IISMOD_SLAVE	  (1<<8)
-#define S3C2410_IISMOD_NOXFER	  (0<<6)
-#define S3C2410_IISMOD_RXMODE	  (1<<6)
-#define S3C2410_IISMOD_TXMODE	  (2<<6)
-#define S3C2410_IISMOD_TXRXMODE	  (3<<6)
-#define S3C2410_IISMOD_LR_LLOW	  (0<<5)
-#define S3C2410_IISMOD_LR_RLOW	  (1<<5)
-#define S3C2410_IISMOD_IIS	  (0<<4)
-#define S3C2410_IISMOD_MSB	  (1<<4)
-#define S3C2410_IISMOD_8BIT	  (0<<3)
-#define S3C2410_IISMOD_16BIT	  (1<<3)
-#define S3C2410_IISMOD_BITMASK	  (1<<3)
-#define S3C2410_IISMOD_256FS	  (0<<2)
-#define S3C2410_IISMOD_384FS	  (1<<2)
-#define S3C2410_IISMOD_16FS	  (0<<0)
-#define S3C2410_IISMOD_32FS	  (1<<0)
-#define S3C2410_IISMOD_48FS	  (2<<0)
-#define S3C2410_IISMOD_FS_MASK	  (3<<0)
-
-#define S3C2410_IISPSR		(0x08)
-#define S3C2410_IISPSR_INTMASK	(31<<5)
-#define S3C2410_IISPSR_INTSHIFT	(5)
-#define S3C2410_IISPSR_EXTMASK	(31<<0)
-#define S3C2410_IISPSR_EXTSHFIT	(0)
-
-#define S3C2410_IISFCON  (0x0c)
-
-#define S3C2410_IISFCON_TXDMA	  (1<<15)
-#define S3C2410_IISFCON_RXDMA	  (1<<14)
-#define S3C2410_IISFCON_TXENABLE  (1<<13)
-#define S3C2410_IISFCON_RXENABLE  (1<<12)
-#define S3C2410_IISFCON_TXMASK	  (0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT	  (6)
-#define S3C2410_IISFCON_RXMASK	  (0x3f)
-#define S3C2410_IISFCON_RXSHIFT	  (0)
-
-#define S3C2410_IISFIFO  (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
deleted file mode 100644
index 892e2f6..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1	(0x20)
-#define S3C2412_SPI1	(0x100)
-
-#define S3C2410_SPCON	(0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2	(0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4	(1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12	(2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14	(3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2	(0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4	(1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12	(2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14	(3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET	(1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET	(1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN		(1<<9)  /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN		(1<<8)  /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX	  (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA	  (2<<5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	  (1<<5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL   (0<<5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	  (1<<4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	  (1<<3)	/* Master/Slave select
-						   0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH	  (1<<2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	  (0<<2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	  (1<<1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	  (0<<1)	/* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD	  (1<<0)	/* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA	 (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE		(1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE		(1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR	(1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR	(1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO	(1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY	(1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL	(1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY	(1<<4)
-
-#define S3C2410_SPSTA_DCOL	  (1<<2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	  (1<<1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	  (1<<0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	  (1<<3)
-
-#define S3C2410_SPPIN	 (0x08)
-
-#define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	  (1<<1)
-#define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
-
-#define S3C2410_SPPRE	 (0x0C)
-#define S3C2410_SPTDAT	 (0x10)
-#define S3C2410_SPRDAT	 (0x14)
-
-#define S3C2412_TXFIFO	 (0x18)
-#define S3C2412_RXFIFO	 (0x18)
-#define S3C2412_SPFIC	 (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
deleted file mode 100644
index f0dd4a4..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1<<7)
-
-#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET		(1<<3) // R
-#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
-
-#define S3C2410_UDC_PWR_DEFAULT		0x00
-
-#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
-
-
-#define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
-#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
-#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
-#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
-#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
-#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
-
-#define S3C2410_UDC_MAXP_8		(1<<0)
-#define S3C2410_UDC_MAXP_16		(1<<1)
-#define S3C2410_UDC_MAXP_32		(1<<2)
-#define S3C2410_UDC_MAXP_64		(1<<3)
-
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 59552c0..5a21b15 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -160,6 +160,124 @@
 	},
 };
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
+static unsigned int *armdiv;
+static int nr_armdiv;
+static int armdivmask;
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
+
+	if (!nr_armdiv)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		if (div) {
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
+			if (calc <= rate && div < best)
+				best = div;
+		}
+	}
+
+	return parent / best;
+}
+
+static unsigned long s3c2443_armclk_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkcon0;
+	int val;
+
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
+	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+	clkcon0 &= armdivmask;
+	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return rate / armdiv[val];
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		if (div) {
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
+			if (calc <= rate && div < best) {
+				best = div;
+				val = ptr;
+			}
+		}
+	}
+
+	if (val >= 0) {
+		unsigned long clkcon0;
+
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= ~armdivmask;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
+
+	return (val == -1) ? -EINVAL : 0;
+}
+
+static struct clk clk_armdiv = {
+	.name		= "armdiv",
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.get_rate = s3c2443_armclk_getrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
+
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
+};
+
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
+
 /* usbhost
  *
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
@@ -205,9 +323,64 @@
 	},
 };
 
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
 
 static struct clk init_clocks_off[] = {
 	{
+		.name		= "iis",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "hsspi",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -253,6 +426,7 @@
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
@@ -347,8 +521,7 @@
 
 /* EPLLCON compatible enough to get on/off information */
 
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
-						   fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
@@ -368,7 +541,7 @@
 	pll = get_mpll(mpllcon, xtal);
 	clk_msysclk.clk.rate = pll;
 
-	fclk = pll / get_fdiv(clkdiv0);
+	fclk = clk_get_rate(&clk_armdiv);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
 	hclk /= s3c2443_get_hdiv(clkdiv0);
 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -403,20 +576,29 @@
 	&clk_ext,
 	&clk_epll,
 	&clk_usb_bus,
+	&clk_armdiv,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_i2s_eplldiv,
+	&clk_i2s,
 	&clk_usb_bus_host,
 	&clk_epllref,
 	&clk_esysclk,
 	&clk_msysclk,
+	&clk_arm,
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       fdiv_fn get_fdiv)
+				       unsigned int *divs, int nr_divs,
+				       int divmask)
 {
 	int ptr;
 
+	armdiv = divs;
+	nr_armdiv = nr_divs;
+	armdivmask = divmask;
+
 	/* s3c2443 parents h and p clocks from prediv */
 	clk_h.parent = &clk_prediv;
 	clk_p.parent = &clk_prediv;
@@ -437,5 +619,5 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
-	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+	s3c2443_common_setup_clocks(get_mpll);
 }
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9a197e5..9b9968f 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
 	default y
 	select ARM_VIC if !ARCH_EXYNOS4
 	select ARM_GIC if ARCH_EXYNOS4
@@ -16,9 +16,6 @@
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_GPIOLIB_4BIT
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
 	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
@@ -42,6 +39,12 @@
 	help
 	  Use the High Resolution timer support
 
+config S5P_PM
+	bool
+	help
+	  Common code for power management support on S5P and newer SoCs
+	  Note: Do not select this for S5P6440 and S5P6450.
+
 comment "System MMU"
 
 config S5P_SYSTEM_MMU
@@ -50,6 +53,12 @@
 	help
 	  Say Y here if you want to enable System MMU
 
+config S5P_SLEEP
+	bool
+	help
+	  Internal config node to apply common S5P sleep management code.
+	  Can be selected by S5P and newer SoCs with similar sleep procedure.
+
 config S5P_DEV_FIMC0
 	bool
 	help
@@ -75,6 +84,11 @@
 	help
 	  Compile in platform device definitions for FIMD controller 0
 
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
 config S5P_DEV_MFC
 	bool
 	help
@@ -95,6 +109,11 @@
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
 
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
 config S5P_DEV_USB_EHCI
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 4b53e04..8763440 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@
 
 # Core files
 
-obj-y				+= dev-pmu.o
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
@@ -20,19 +19,10 @@
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
 obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
 obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
-obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
-obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
-obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
-obj-$(CONFIG_S5P_DEV_FIMC3)	+= dev-fimc3.o
-obj-$(CONFIG_S5P_DEV_FIMD0)	+= dev-fimd0.o
-obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
-obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
-obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
-obj-$(CONFIG_S5P_DEV_USB_EHCI)	+= dev-ehci.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 7b0a28f..a56959e 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -75,7 +75,7 @@
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos4_init,
+		.init		= exynos_init,
 		.name		= name_exynos4210,
 	}, {
 		.idcode		= EXYNOS4212_CPU_ID,
@@ -83,7 +83,7 @@
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos4_init,
+		.init		= exynos_init,
 		.name		= name_exynos4212,
 	}, {
 		.idcode		= EXYNOS4412_CPU_ID,
@@ -91,7 +91,7 @@
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
-		.init		= exynos4_init,
+		.init		= exynos_init,
 		.name		= name_exynos4412,
 	},
 };
diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c
deleted file mode 100644
index e3aabef..0000000
--- a/arch/arm/plat-s5p/dev-csis0.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series device definition for MIPI-CSIS channel 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-
-static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = {
-		.start = S5P_PA_MIPI_CSIS0,
-		.end   = S5P_PA_MIPI_CSIS0 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_MIPI_CSIS0,
-		.end   = IRQ_MIPI_CSIS0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
-	.name		  = "s5p-mipi-csis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis0_resource),
-	.resource	  = s5p_mipi_csis0_resource,
-};
diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c
deleted file mode 100644
index 08b91b5..0000000
--- a/arch/arm/plat-s5p/dev-csis1.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series device definition for MIPI-CSIS channel 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-
-static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = {
-		.start = S5P_PA_MIPI_CSIS1,
-		.end   = S5P_PA_MIPI_CSIS1 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_MIPI_CSIS1,
-		.end   = IRQ_MIPI_CSIS1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
-	.name		  = "s5p-mipi-csis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p_mipi_csis1_resource),
-	.resource	  = s5p_mipi_csis1_resource,
-};
diff --git a/arch/arm/plat-s5p/dev-ehci.c b/arch/arm/plat-s5p/dev-ehci.c
deleted file mode 100644
index 94080ff..0000000
--- a/arch/arm/plat-s5p/dev-ehci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/ehci.h>
-#include <plat/usb-phy.h>
-
-/* USB EHCI Host Controller registration */
-static struct resource s5p_ehci_resource[] = {
-	[0] = {
-		.start	= S5P_PA_EHCI,
-		.end	= S5P_PA_EHCI + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB_HOST,
-		.end	= IRQ_USB_HOST,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 s5p_device_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask = &s5p_device_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
deleted file mode 100644
index 608770f..0000000
--- a/arch/arm/plat-s5p/dev-fimc0.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-fimc0.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC0 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc0_resource[] = {
-	[0] = {
-		.start	= S5P_PA_FIMC0,
-		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_FIMC0,
-		.end	= IRQ_FIMC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc0 = {
-	.name		= "s5p-fimc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
-	.resource	= s5p_fimc0_resource,
-	.dev		= {
-		.dma_mask		= &s5p_fimc0_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
deleted file mode 100644
index 76e3a97..0000000
--- a/arch/arm/plat-s5p/dev-fimc1.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-fimc1.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC1 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc1_resource[] = {
-	[0] = {
-		.start	= S5P_PA_FIMC1,
-		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_FIMC1,
-		.end	= IRQ_FIMC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc1 = {
-	.name		= "s5p-fimc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
-	.resource	= s5p_fimc1_resource,
-	.dev		= {
-		.dma_mask		= &s5p_fimc1_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
deleted file mode 100644
index 24d2981..0000000
--- a/arch/arm/plat-s5p/dev-fimc2.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-fimc2.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC2 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc2_resource[] = {
-	[0] = {
-		.start	= S5P_PA_FIMC2,
-		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_FIMC2,
-		.end	= IRQ_FIMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc2 = {
-	.name		= "s5p-fimc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
-	.resource	= s5p_fimc2_resource,
-	.dev		= {
-		.dma_mask		= &s5p_fimc2_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c
deleted file mode 100644
index ef31bec..0000000
--- a/arch/arm/plat-s5p/dev-fimc3.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-fimc3.c
- *
- * Copyright (c) 2010 Samsung Electronics
- *
- * Base S5P FIMC3 resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <mach/map.h>
-
-static struct resource s5p_fimc3_resource[] = {
-	[0] = {
-		.start	= S5P_PA_FIMC3,
-		.end	= S5P_PA_FIMC3 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_FIMC3,
-		.end	= IRQ_FIMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimc3 = {
-	.name		= "s5p-fimc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s5p_fimc3_resource),
-	.resource	= s5p_fimc3_resource,
-	.dev		= {
-		.dma_mask		= &s5p_fimc3_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c
deleted file mode 100644
index f728bb5..0000000
--- a/arch/arm/plat-s5p/dev-fimd0.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-fimd0.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com
- *
- * Core file for Samsung Display Controller (FIMD) driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s5p_fimd0_resource[] = {
-	[0] = {
-		.start	= S5P_PA_FIMD0,
-		.end	= S5P_PA_FIMD0 + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_FIMD0_VSYNC,
-		.end	= IRQ_FIMD0_VSYNC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_FIMD0_FIFO,
-		.end	= IRQ_FIMD0_FIFO,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_FIMD0_SYSTEM,
-		.end	= IRQ_FIMD0_SYSTEM,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fimd0_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_fimd0 = {
-	.name		= "s5p-fb",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimd0_resource),
-	.resource	= s5p_fimd0_resource,
-	.dev		= {
-		.dma_mask		= &fimd0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			&s5p_device_fimd0);
-}
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c
index 94226a0..a30d36b 100644
--- a/arch/arm/plat-s5p/dev-mfc.c
+++ b/arch/arm/plat-s5p/dev-mfc.c
@@ -22,56 +22,6 @@
 #include <plat/irqs.h>
 #include <plat/mfc.h>
 
-static struct resource s5p_mfc_resource[] = {
-	[0] = {
-		.start	= S5P_PA_MFC,
-		.end	= S5P_PA_MFC + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MFC,
-		.end	= IRQ_MFC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device s5p_device_mfc = {
-	.name		= "s5p-mfc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
-	.resource	= s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device s5p_device_mfc_l = {
-	.name		= "s5p-mfc-l",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &s5p_mfc_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_mfc_r = {
-	.name		= "s5p-mfc-r",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &s5p_mfc_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
 struct s5p_mfc_reserved_mem {
 	phys_addr_t	base;
 	unsigned long	size;
diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
deleted file mode 100644
index 20336c8..0000000
--- a/arch/arm/plat-s5p/dev-onenand.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-onenand.c
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- *  Copyright (c) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5P series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-static struct resource s5p_onenand_resources[] = {
-	[0] = {
-		.start	= S5P_PA_ONENAND,
-		.end	= S5P_PA_ONENAND + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S5P_PA_ONENAND_DMA,
-		.end	= S5P_PA_ONENAND_DMA + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_ONENAND_AUDI,
-		.end	= IRQ_ONENAND_AUDI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s5p_device_onenand = {
-	.name		= "s5pc110-onenand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
-	.resource	= s5p_onenand_resources,
-};
diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c
deleted file mode 100644
index a08576d..0000000
--- a/arch/arm/plat-s5p/dev-pmu.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/arch/arm/plat-s5p/dev-pmu.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource s5p_pmu_resource = {
-	.start	= IRQ_PMU,
-	.end	= IRQ_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-struct platform_device s5p_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= 1,
-	.resource	= &s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
-	platform_device_register(&s5p_device_pmu);
-	return 0;
-}
-arch_initcall(s5p_pmu_init);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
deleted file mode 100644
index 3e21b94..0000000
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/pll.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P PLL code
- *
- * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/div64.h>
-
-#define PLL35XX_MDIV_MASK	(0x3FF)
-#define PLL35XX_PDIV_MASK	(0x3F)
-#define PLL35XX_SDIV_MASK	(0x7)
-#define PLL35XX_MDIV_SHIFT	(16)
-#define PLL35XX_PDIV_SHIFT	(8)
-#define PLL35XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL36XX_KDIV_MASK	(0xFFFF)
-#define PLL36XX_MDIV_MASK	(0x1FF)
-#define PLL36XX_PDIV_MASK	(0x3F)
-#define PLL36XX_SDIV_MASK	(0x7)
-#define PLL36XX_MDIV_SHIFT	(16)
-#define PLL36XX_PDIV_SHIFT	(8)
-#define PLL36XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL45XX_MDIV_MASK	(0x3FF)
-#define PLL45XX_PDIV_MASK	(0x3F)
-#define PLL45XX_SDIV_MASK	(0x7)
-#define PLL45XX_MDIV_SHIFT	(16)
-#define PLL45XX_PDIV_SHIFT	(8)
-#define PLL45XX_SDIV_SHIFT	(0)
-
-enum pll45xx_type_t {
-	pll_4500,
-	pll_4502,
-	pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
-					    enum pll45xx_type_t pll_type)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
-	if (pll_type == pll_4508)
-		sdiv = sdiv - 1;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
-#define PLL46XX_MDIV_MASK	(0x1FF)
-#define PLL46XX_PDIV_MASK	(0x3F)
-#define PLL46XX_SDIV_MASK	(0x7)
-#define PLL46XX_MDIV_SHIFT	(16)
-#define PLL46XX_PDIV_SHIFT	(8)
-#define PLL46XX_SDIV_SHIFT	(0)
-
-enum pll46xx_type_t {
-	pll_4600,
-	pll_4650,
-	pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1,
-					    enum pll46xx_type_t pll_type)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-
-	if (pll_type == pll_4650c)
-		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-	else
-		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	if (pll_type == pll_4600) {
-		tmp *= (mdiv << 16) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 16;
-	} else {
-		tmp *= (mdiv << 10) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 10;
-	}
-
-	return result;
-}
-
-#define PLL90XX_MDIV_MASK	(0xFF)
-#define PLL90XX_PDIV_MASK	(0x3F)
-#define PLL90XX_SDIV_MASK	(0x7)
-#define PLL90XX_KDIV_MASK	(0xffff)
-#define PLL90XX_MDIV_SHIFT	(16)
-#define PLL90XX_PDIV_SHIFT	(8)
-#define PLL90XX_SDIV_SHIFT	(0)
-#define PLL90XX_KDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
-					    u32 pll_con, u32 pll_conk)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
-	kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL65XX_MDIV_MASK	(0x3FF)
-#define PLL65XX_PDIV_MASK	(0x3F)
-#define PLL65XX_SDIV_MASK	(0x7)
-#define PLL65XX_MDIV_SHIFT	(16)
-#define PLL65XX_PDIV_SHIFT	(8)
-#define PLL65XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index c65eb79..1fdfaa4 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -37,7 +37,7 @@
 	int			start;
 	int			nr_groups;
 	int			irq;
-	struct s3c_gpio_chip	**chips;
+	struct samsung_gpio_chip	**chips;
 	void			(*handler)(unsigned int, struct irq_desc *);
 };
 
@@ -87,7 +87,7 @@
 	chained_irq_enter(chip, desc);
 
 	for (group = 0; group < bank->nr_groups; group++) {
-		struct s3c_gpio_chip *chip = bank->chips[group];
+		struct samsung_gpio_chip *chip = bank->chips[group];
 		if (!chip)
 			continue;
 
@@ -110,7 +110,7 @@
 	chained_irq_exit(chip, desc);
 }
 
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
@@ -131,7 +131,7 @@
 		return -EINVAL;
 
 	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
 				      bank->nr_groups, GFP_KERNEL);
 		if (!bank->chips)
 			return -ENOMEM;
@@ -174,7 +174,7 @@
 
 int __init s5p_register_gpio_interrupt(int pin)
 {
-	struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
 	int offset, group;
 	int ret;
 
diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/plat-s5p/sleep.S
similarity index 81%
rename from arch/arm/mach-exynos4/sleep.S
rename to arch/arm/plat-s5p/sleep.S
index 0984078..0fd591b 100644
--- a/arch/arm/mach-exynos4/sleep.S
+++ b/arch/arm/plat-s5p/sleep.S
@@ -1,15 +1,11 @@
-/* linux/arch/arm/mach-exynos4/sleep.S
+/* linux/arch/arm/plat-s5p/sleep.S
  *
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- *	Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ *	Ben Dooks, (c) 2008 Simtec Electronics
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,7 +24,6 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/memory.h>
 
 	.text
 
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index e1cbc72..c8bec9c 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -11,6 +11,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 3895f9a..313eb26 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -74,39 +74,12 @@
 	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
 	  series of processors.
 
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
 config S3C_GPIO_CFG_S3C64XX
 	bool
 	help
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
-	bool
-	select S3C_GPIO_PULL_UPDOWN
-	help
-	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
 config S5P_GPIO_DRVSTR
 	bool
 	help
@@ -295,11 +268,14 @@
 	help
 	  Internal configuration for S3C DMA core
 
-config S3C_PL330_DMA
+config SAMSUNG_DMADEV
 	bool
-	select PL330
+	select DMADEVICES
+	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+					CPU_S5P6450 || CPU_S5P6440)
+	select ARM_AMBA
 	help
-	  S3C DMA API Driver for PL330 DMAC.
+	  Use DMA device engine for PL330 DMAC.
 
 comment "Power management"
 
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 09adb84..6012366 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -1,4 +1,4 @@
-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/plat-samsung/Makefile
 #
 # Copyright 2009 Simtec Electronics
 #
@@ -15,9 +15,6 @@
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
-obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 
@@ -31,40 +28,16 @@
 
 obj-y				+= platformdata.o
 
-obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
-obj-$(CONFIG_S3C_DEV_HSMMC3)	+= dev-hsmmc3.o
-obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
-obj-y				+= dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
-obj-$(CONFIG_S3C_DEV_I2C3)	+= dev-i2c3.o
-obj-$(CONFIG_S3C_DEV_I2C4)	+= dev-i2c4.o
-obj-$(CONFIG_S3C_DEV_I2C5)	+= dev-i2c5.o
-obj-$(CONFIG_S3C_DEV_I2C6)	+= dev-i2c6.o
-obj-$(CONFIG_S3C_DEV_I2C7)	+= dev-i2c7.o
-obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-y				+= devs.o
 obj-y				+= dev-uart.o
-obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_WDT)	+= dev-wdt.o
-obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
-obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
-obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
 
-obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
-obj-$(CONFIG_SAMSUNG_DEV_IDE)	+= dev-ide.o
-obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
-obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)	+= dev-keypad.o
-obj-$(CONFIG_SAMSUNG_DEV_PWM)	+= dev-pwm.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 # DMA support
 
-obj-$(CONFIG_S3C_DMA)		+= dma.o
+obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index ee8deef..33ecd0c 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -41,6 +41,8 @@
 
 enum s3c_cpu_type {
 	TYPE_ADCV1, /* S3C24XX */
+	TYPE_ADCV11, /* S3C2443 */
+	TYPE_ADCV12, /* S3C2416, S3C2450 */
 	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
 	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
 };
@@ -98,13 +100,17 @@
 
 	client->select_cb(client, 1);
 
-	con &= ~S3C2410_ADCCON_MUXMASK;
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+		con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
 	con &= ~S3C2410_ADCCON_STARTMASK;
 
 	if (!client->is_ts) {
 		if (cpu == TYPE_ADCV3)
 			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+			writel(client->channel & 0xf,
+						adc->regs + S3C2443_ADCMUX);
 		else
 			con |= S3C2410_ADCCON_SELMUX(client->channel);
 	}
@@ -293,13 +299,13 @@
 
 	client->nr_samples--;
 
-	if (cpu != TYPE_ADCV1) {
-		/* S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	} else {
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
 		data0 &= 0x3ff;
 		data1 &= 0x3ff;
+	} else {
+		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
 	}
 
 	if (client->convert_cb)
@@ -320,7 +326,7 @@
 	}
 
 exit:
-	if (cpu != TYPE_ADCV1) {
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
 		/* Clear ADC interrupt */
 		writel(0, adc->regs + S3C64XX_ADCCLRINT);
 	}
@@ -332,6 +338,7 @@
 	struct device *dev = &pdev->dev;
 	struct adc_device *adc;
 	struct resource *regs;
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned tmp;
 
@@ -394,10 +401,13 @@
 	clk_enable(adc->clk);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
-		/* Enable 12-bit ADC resolution */
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
-	}
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	dev_info(dev, "attached adc driver\n");
@@ -464,6 +474,7 @@
 	struct platform_device *pdev = container_of(dev,
 			struct platform_device, dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned long tmp;
 
@@ -474,9 +485,13 @@
 	enable_irq(adc->irq);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
 	/* Enable 12-bit ADC resolution */
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	return 0;
@@ -492,6 +507,12 @@
 		.name           = "s3c24xx-adc",
 		.driver_data    = TYPE_ADCV1,
 	}, {
+		.name		= "s3c2443-adc",
+		.driver_data	= TYPE_ADCV11,
+	}, {
+		.name		= "s3c2416-adc",
+		.driver_data	= TYPE_ADCV12,
+	}, {
 		.name           = "s3c64xx-adc",
 		.driver_data    = TYPE_ADCV2,
 	}, {
diff --git a/arch/arm/plat-samsung/dev-adc.c b/arch/arm/plat-samsung/dev-adc.c
deleted file mode 100644
index 9d903d4..0000000
--- a/arch/arm/plat-samsung/dev-adc.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-adc.c
- *
- * Copyright 2010 Maurus Cuelenaere
- *
- * S3C64xx series device definition for ADC device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/adc.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_adc_resource[] = {
-	[0] = {
-		.start = SAMSUNG_PA_ADC,
-		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "samsung-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c
deleted file mode 100644
index 97e35d3..0000000
--- a/arch/arm/plat-samsung/dev-asocdma.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-asocdma.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <plat/devs.h>
-
-static u64 audio_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device samsung_asoc_dma = {
-	.name		  = "samsung-audio",
-	.id		  = -1,
-	.dev              = {
-		.dma_mask = &audio_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	}
-};
-EXPORT_SYMBOL(samsung_asoc_dma);
-
-struct platform_device samsung_asoc_idma = {
-	.name		= "samsung-idma",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &audio_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-EXPORT_SYMBOL(samsung_asoc_idma);
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index 3cedd4c..e657305 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -12,8 +12,10 @@
 
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/pwm_backlight.h>
+#include <linux/slab.h>
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
deleted file mode 100644
index 49a1362..0000000
--- a/arch/arm/plat-samsung/dev-fb.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-fb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for framebuffer device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_fb_resource[] = {
-	[0] = {
-		.start = S3C_PA_FB,
-		.end   = S3C_PA_FB + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD_VSYNC,
-		.end   = IRQ_LCD_VSYNC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_LCD_FIFO,
-		.end   = IRQ_LCD_FIFO,
-		.flags = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start = IRQ_LCD_SYSTEM,
-		.end   = IRQ_LCD_SYSTEM,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_fb = {
-	.name		  = "s3c-fb",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
-	.resource	  = s3c_fb_resource,
-	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
-	.dev.coherent_dma_mask = 0xffffffffUL,
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s3c_device_fb);
-}
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
deleted file mode 100644
index 06825c4..0000000
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC0,
-		.end   = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC0,
-		.end   = IRQ_HSMMC0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc0 = {
-	.name		= "s3c-sdhci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
-	.resource	= s3c_hsmmc_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc0_def_platdata,
-	},
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
-}
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
deleted file mode 100644
index 4524ef4..0000000
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for hsmmc device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc1_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC1,
-		.end   = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC1,
-		.end   = IRQ_HSMMC1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc1 = {
-	.name		= "s3c-sdhci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
-	.resource	= s3c_hsmmc1_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc1_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc1_def_platdata,
-	},
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
-}
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
deleted file mode 100644
index 9cede96..0000000
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
- *
- * Copyright (c) 2009 Samsung Electronics
- * Copyright (c) 2009 Maurus Cuelenaere
- *
- * Based on arch/arm/plat-s3c/dev-hsmmc1.c
- * original file Copyright (c) 2008 Simtec Electronics
- *
- * S3C series device definition for hsmmc device 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc2_resource[] = {
-	[0] = {
-		.start = S3C_PA_HSMMC2,
-		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_HSMMC2,
-		.end   = IRQ_HSMMC2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc2 = {
-	.name		= "s3c-sdhci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
-	.resource	= s3c_hsmmc2_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc2_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc2_def_platdata,
-	},
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
-}
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
deleted file mode 100644
index 0358ef4..0000000
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/plat-samsung/dev-hsmmc1.c
- *
- * Samsung device definition for hsmmc device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/map.h>
-#include <plat/sdhci.h>
-#include <plat/devs.h>
-
-#define S3C_SZ_HSMMC	(0x1000)
-
-static struct resource s3c_hsmmc3_resource[] = {
-	[0] = {
-		.start	= S3C_PA_HSMMC3,
-		.end	= S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_HSMMC3,
-		.end	= IRQ_HSMMC3,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc3 = {
-	.name		= "s3c-sdhci",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
-	.resource	= s3c_hsmmc3_resource,
-	.dev		= {
-		.dma_mask		= &s3c_device_hsmmc3_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
-		.platform_data		= &s3c_hsmmc3_def_platdata,
-	},
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c
deleted file mode 100644
index c91a79c..0000000
--- a/arch/arm/plat-samsung/dev-hwmon.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-hwmon.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Adapted for HWMON by Maurus Cuelenaere
- *
- * Samsung series device definition for HWMON
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-#include <plat/hwmon.h>
-
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
-			 &s3c_device_hwmon);
-}
diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
deleted file mode 100644
index f8251f5..0000000
--- a/arch/arm/plat-samsung/dev-i2c0.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c0.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC,
-		.end   = S3C_PA_IIC + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC,
-		.end   = IRQ_IIC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c0 = {
-	.name		  = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-	.id		  = 0,
-#else
-	.id		  = -1,
-#endif
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd)
-		pd = &default_i2c_data;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c0);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
deleted file mode 100644
index 3b7c7be..0000000
--- a/arch/arm/plat-samsung/dev-i2c1.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c1.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC1,
-		.end   = S3C_PA_IIC1 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC1,
-		.end   = IRQ_IIC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c1 = {
-	.name		  = "s3c2410-i2c",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 1;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c1);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
deleted file mode 100644
index 07e9fd0..0000000
--- a/arch/arm/plat-samsung/dev-i2c2.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c2.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C series device definition for i2c device 2
- *
- * Based on plat-samsung/dev-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC2,
-		.end   = S3C_PA_IIC2 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC2,
-		.end   = IRQ_IIC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c2 = {
-	.name		  = "s3c2410-i2c",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 2;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c2);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c
deleted file mode 100644
index d48efa9..0000000
--- a/arch/arm/plat-samsung/dev-i2c3.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start	= S3C_PA_IIC3,
-		.end	= S3C_PA_IIC3 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IIC3,
-		.end	= IRQ_IIC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c3 = {
-	.name		= "s3c2440-i2c",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
-	.resource	= s3c_i2c_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 3;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c3);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c
deleted file mode 100644
index 07e2644..0000000
--- a/arch/arm/plat-samsung/dev-i2c4.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-i2c4.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start	= S3C_PA_IIC4,
-		.end	= S3C_PA_IIC4 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IIC4,
-		.end	= IRQ_IIC4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c4 = {
-	.name		= "s3c2440-i2c",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
-	.resource	= s3c_i2c_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 4;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c4);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c
deleted file mode 100644
index f496557..0000000
--- a/arch/arm/plat-samsung/dev-i2c5.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P series device definition for i2c device 3
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start	= S3C_PA_IIC5,
-		.end	= S3C_PA_IIC5 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IIC5,
-		.end	= IRQ_IIC5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c5 = {
-	.name		= "s3c2440-i2c",
-	.id		= 5,
-	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
-	.resource	= s3c_i2c_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 5;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c5);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c
deleted file mode 100644
index 141d799..0000000
--- a/arch/arm/plat-samsung/dev-i2c6.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-i2c6.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P series device definition for i2c device 6
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start	= S3C_PA_IIC6,
-		.end	= S3C_PA_IIC6 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IIC6,
-		.end	= IRQ_IIC6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c6 = {
-	.name		= "s3c2440-i2c",
-	.id		= 6,
-	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
-	.resource	= s3c_i2c_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 6;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c6);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c
deleted file mode 100644
index 9dddcd1..0000000
--- a/arch/arm/plat-samsung/dev-i2c7.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-i2c7.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P series device definition for i2c device 7
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start	= S3C_PA_IIC7,
-		.end	= S3C_PA_IIC7 + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IIC7,
-		.end	= IRQ_IIC7,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c7 = {
-	.name		= "s3c2440-i2c",
-	.id		= 7,
-	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
-	.resource	= s3c_i2c_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 7;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c7);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c
deleted file mode 100644
index b497982..0000000
--- a/arch/arm/plat-samsung/dev-ide.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA device definition.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <mach/map.h>
-#include <plat/ata.h>
-#include <plat/devs.h>
-
-static struct resource s3c_cfcon_resource[] = {
-	[0] = {
-		.start	= SAMSUNG_PA_CFCON,
-		.end	= SAMSUNG_PA_CFCON + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CFCON,
-		.end	= IRQ_CFCON,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_cfcon = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
-	.resource	= s3c_cfcon_resource,
-};
-
-void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
-			 &s3c_device_cfcon);
-}
diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c
deleted file mode 100644
index 677c2d7..0000000
--- a/arch/arm/plat-samsung/dev-keypad.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/dev-keypad.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/keypad.h>
-
-static struct resource samsung_keypad_resources[] = {
-	[0] = {
-		.start	= SAMSUNG_PA_KEYPAD,
-		.end	= SAMSUNG_PA_KEYPAD + 0x20 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device samsung_device_keypad = {
-	.name		= "samsung-keypad",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
-	.resource	= samsung_keypad_resources,
-};
-
-void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
-{
-	struct samsung_keypad_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
-			&samsung_device_keypad);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = samsung_keypad_cfg_gpio;
-}
diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
deleted file mode 100644
index b8e30ec..0000000
--- a/arch/arm/plat-samsung/dev-nand.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * S3C series device definition for nand device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/nand.h>
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C_PA_NAND,
-		.end   = S3C_PA_NAND + SZ_1M,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
-/**
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */ 
-
-	npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
-				&s3c_device_nand);
-	if (!npd)
-		return;
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-		
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-}
diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c
deleted file mode 100644
index f54ae71..0000000
--- a/arch/arm/plat-samsung/dev-onenand.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/dev-onenand.c
- *
- *  Copyright (c) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S3C64XX/S5PC100 series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-static struct resource s3c_onenand_resources[] = {
-	[0] = {
-		.start	= S3C_PA_ONENAND,
-		.end	= S3C_PA_ONENAND + 0x400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C_PA_ONENAND_BUF,
-		.end	= S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_ONENAND,
-		.end	= IRQ_ONENAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_onenand = {
-	.name		= "samsung-onenand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
-	.resource	= s3c_onenand_resources,
-};
diff --git a/arch/arm/plat-samsung/dev-pwm.c b/arch/arm/plat-samsung/dev-pwm.c
deleted file mode 100644
index dab47b0..0000000
--- a/arch/arm/plat-samsung/dev-pwm.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-pwm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series device definition for the PWM timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-EXPORT_SYMBOL(s3c_device_timer);
diff --git a/arch/arm/plat-samsung/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c
deleted file mode 100644
index bf4e226..0000000
--- a/arch/arm/plat-samsung/dev-rtc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-rtc.c
- *
- * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_rtc_resource[] = {
-	[0] = {
-		.start	= S3C_PA_RTC,
-		.end	= S3C_PA_RTC + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_RTC_ALARM,
-		.end	= IRQ_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_RTC_TIC,
-		.end	= IRQ_RTC_TIC,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c64xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
deleted file mode 100644
index 5f3d46a..0000000
--- a/arch/arm/plat-samsung/dev-ts.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/dev-ts.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * Adapted by Maurus Cuelenaere for s3c64xx
- *
- * S3C64XX series device definition for touchscreen device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/ts.h>
-
-static struct resource s3c_ts_resource[] = {
-	[0] = {
-		.start = SAMSUNG_PA_ADC,
-		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c64xx-ts",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
-	if (!pd)
-		pd = &default_ts_data;
-
-	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_ts);
-}
diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
deleted file mode 100644
index 33a844a..0000000
--- a/arch/arm/plat-samsung/dev-usb-hsotg.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB high-speed UDC/OtG block
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = {
-		.start	= S3C_PA_USB_HSOTG,
-		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_OTG,
-		.end	= IRQ_OTG,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsotg = {
-	.name		= "s3c-hsotg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
-	.resource	= s3c_usb_hsotg_resources,
-	.dev		= {
-		.dma_mask		= &s3c_hsotg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
deleted file mode 100644
index 33fbaa9..0000000
--- a/arch/arm/plat-samsung/dev-usb.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB host
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/usb-control.h>
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C_PA_USBHOST,
-		.end   = S3C_PA_USBHOST + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ohci = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_ohci);
-
-/**
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
-	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
-			 &s3c_device_ohci);
-}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
deleted file mode 100644
index 019b5b8..0000000
--- a/arch/arm/plat-samsung/dev-wdt.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-wdt.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C series device definition for the watchdog timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_wdt_resource[] = {
-	[0] = {
-		.start	= S3C_PA_WDT,
-		.end	= S3C_PA_WDT + SZ_1K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_WDT,
-		.end	= IRQ_WDT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		= "s3c2410-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
-	.resource	= s3c_wdt_resource,
-};
-EXPORT_SYMBOL(s3c_device_wdt);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
new file mode 100644
index 0000000..4ca8b571
--- /dev/null
+++ b/arch/arm/plat-samsung/devs.c
@@ -0,0 +1,1463 @@
+/* linux/arch/arm/plat-samsung/devs.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Base SAMSUNG platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+#include <asm/pmu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/adc.h>
+#include <plat/ata.h>
+#include <plat/ehci.h>
+#include <plat/fb.h>
+#include <plat/fb-s3c2410.h>
+#include <plat/hwmon.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/mci.h>
+#include <plat/nand.h>
+#include <plat/sdhci.h>
+#include <plat/ts.h>
+#include <plat/udc.h>
+#include <plat/usb-control.h>
+#include <plat/usb-phy.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+
+static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+
+/* AC97 */
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_ac97_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
+	[2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
+	[3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
+	[4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
+};
+
+struct platform_device s3c_device_ac97 = {
+	.name		= "samsung-ac97",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
+	.resource	= s3c_ac97_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ADC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_adc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+	[2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c24xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#if defined(CONFIG_SAMSUNG_DEV_ADC)
+static struct resource s3c_adc_resource[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+	[2] = DEFINE_RES_IRQ(IRQ_ADC),
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "samsung-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
+#endif /* CONFIG_SAMSUNG_DEV_ADC */
+
+/* Camif Controller */
+
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_camif_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
+	[1] = DEFINE_RES_IRQ(IRQ_CAM),
+};
+
+struct platform_device s3c_device_camif = {
+	.name		= "s3c2440-camif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
+	.resource	= s3c_camif_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ASOC DMA */
+
+struct platform_device samsung_asoc_dma = {
+	.name		= "samsung-audio",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+struct platform_device samsung_asoc_idma = {
+	.name		= "samsung-idma",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+/* FB */
+
+#ifdef CONFIG_S3C_DEV_FB
+static struct resource s3c_fb_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
+	[2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
+	[3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
+};
+
+struct platform_device s3c_device_fb = {
+	.name		= "s3c-fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_fb_resource),
+	.resource	= s3c_fb_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+			 &s3c_device_fb);
+}
+#endif /* CONFIG_S3C_DEV_FB */
+
+/* FIMC */
+
+#ifdef CONFIG_S5P_DEV_FIMC0
+static struct resource s5p_fimc0_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_FIMC0),
+};
+
+struct platform_device s5p_device_fimc0 = {
+	.name		= "s5p-fimc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
+	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name	= "s5p-fimc-md",
+	.id	= -1,
+};
+#endif /* CONFIG_S5P_DEV_FIMC0 */
+
+#ifdef CONFIG_S5P_DEV_FIMC1
+static struct resource s5p_fimc1_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_FIMC1),
+};
+
+struct platform_device s5p_device_fimc1 = {
+	.name		= "s5p-fimc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
+	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_FIMC1 */
+
+#ifdef CONFIG_S5P_DEV_FIMC2
+static struct resource s5p_fimc2_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_FIMC2),
+};
+
+struct platform_device s5p_device_fimc2 = {
+	.name		= "s5p-fimc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
+	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_FIMC2 */
+
+#ifdef CONFIG_S5P_DEV_FIMC3
+static struct resource s5p_fimc3_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_FIMC3),
+};
+
+struct platform_device s5p_device_fimc3 = {
+	.name		= "s5p-fimc",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s5p_fimc3_resource),
+	.resource	= s5p_fimc3_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_FIMC3 */
+
+/* FIMD0 */
+
+#ifdef CONFIG_S5P_DEV_FIMD0
+static struct resource s5p_fimd0_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
+	[1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
+	[2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
+	[3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
+};
+
+struct platform_device s5p_device_fimd0 = {
+	.name		= "s5p-fb",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_fimd0_resource),
+	.resource	= s5p_fimd0_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+			 &s5p_device_fimd0);
+}
+#endif /* CONFIG_S5P_DEV_FIMD0 */
+
+/* HWMON */
+
+#ifdef CONFIG_S3C_DEV_HWMON
+struct platform_device s3c_device_hwmon = {
+	.name		= "s3c-hwmon",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
+			 &s3c_device_hwmon);
+}
+#endif /* CONFIG_S3C_DEV_HWMON */
+
+/* HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static struct resource s3c_hsmmc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+	.name		= "s3c-sdhci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
+	.resource	= s3c_hsmmc_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc0_def_platdata,
+	},
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static struct resource s3c_hsmmc1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+	.name		= "s3c-sdhci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
+	.resource	= s3c_hsmmc1_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc1_def_platdata,
+	},
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+/* HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC3
+static struct resource s3c_hsmmc3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
+};
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+	.name		= "s3c-sdhci",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
+	.resource	= s3c_hsmmc3_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_hsmmc3_def_platdata,
+	},
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
+}
+#endif /* CONFIG_S3C_DEV_HSMMC3 */
+
+/* I2C */
+
+static struct resource s3c_i2c0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC),
+};
+
+struct platform_device s3c_device_i2c0 = {
+	.name		= "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+	.id		= 0,
+#else
+	.id		= -1,
+#endif
+	.num_resources	= ARRAY_SIZE(s3c_i2c0_resource),
+	.resource	= s3c_i2c0_resource,
+};
+
+struct s3c2410_platform_i2c default_i2c_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data;
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c0);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+}
+
+#ifdef CONFIG_S3C_DEV_I2C1
+static struct resource s3c_i2c1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC1),
+};
+
+struct platform_device s3c_device_i2c1 = {
+	.name		= "s3c2410-i2c",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_i2c1_resource),
+	.resource	= s3c_i2c1_resource,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 1;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c1);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C1 */
+
+#ifdef CONFIG_S3C_DEV_I2C2
+static struct resource s3c_i2c2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
+};
+
+struct platform_device s3c_device_i2c2 = {
+	.name		= "s3c2410-i2c",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
+	.resource	= s3c_i2c2_resource,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 2;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c2);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C2 */
+
+#ifdef CONFIG_S3C_DEV_I2C3
+static struct resource s3c_i2c3_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
+};
+
+struct platform_device s3c_device_i2c3 = {
+	.name		= "s3c2440-i2c",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
+	.resource	= s3c_i2c3_resource,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 3;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c3);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C3 */
+
+#ifdef CONFIG_S3C_DEV_I2C4
+static struct resource s3c_i2c4_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
+};
+
+struct platform_device s3c_device_i2c4 = {
+	.name		= "s3c2440-i2c",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
+	.resource	= s3c_i2c4_resource,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 4;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c4);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C4 */
+
+#ifdef CONFIG_S3C_DEV_I2C5
+static struct resource s3c_i2c5_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
+};
+
+struct platform_device s3c_device_i2c5 = {
+	.name		= "s3c2440-i2c",
+	.id		= 5,
+	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
+	.resource	= s3c_i2c5_resource,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 5;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c5);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+}
+#endif /*CONFIG_S3C_DEV_I2C5 */
+
+#ifdef CONFIG_S3C_DEV_I2C6
+static struct resource s3c_i2c6_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
+};
+
+struct platform_device s3c_device_i2c6 = {
+	.name		= "s3c2440-i2c",
+	.id		= 6,
+	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
+	.resource	= s3c_i2c6_resource,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 6;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c6);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C6 */
+
+#ifdef CONFIG_S3C_DEV_I2C7
+static struct resource s3c_i2c7_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
+};
+
+struct platform_device s3c_device_i2c7 = {
+	.name		= "s3c2440-i2c",
+	.id		= 7,
+	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
+	.resource	= s3c_i2c7_resource,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = 7;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s3c_device_i2c7);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+}
+#endif /* CONFIG_S3C_DEV_I2C7 */
+
+/* I2C HDMIPHY */
+
+#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
+static struct resource s5p_i2c_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+	.name		= "s3c2440-hdmiphy-i2c",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_i2c_resource),
+	.resource	= s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+
+		if (soc_is_exynos4210())
+			pd->bus_num = 8;
+		else if (soc_is_s5pv210())
+			pd->bus_num = 3;
+		else
+			pd->bus_num = 0;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s5p_device_i2c_hdmiphy);
+}
+#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
+
+/* I2S */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_iis_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
+};
+
+struct platform_device s3c_device_iis = {
+	.name		= "s3c24xx-iis",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
+	.resource	= s3c_iis_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_CPU_S3C2440
+struct platform_device s3c2412_device_iis = {
+	.name		= "s3c2412-iis",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* IDE CFCON */
+
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+static struct resource s3c_cfcon_resource[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
+	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
+};
+
+struct platform_device s3c_device_cfcon = {
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
+	.resource	= s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+			 &s3c_device_cfcon);
+}
+#endif /* CONFIG_SAMSUNG_DEV_IDE */
+
+/* KEYPAD */
+
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+static struct resource samsung_keypad_resources[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
+};
+
+struct platform_device samsung_device_keypad = {
+	.name		= "samsung-keypad",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
+	.resource	= samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+	struct samsung_keypad_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+			&samsung_device_keypad);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
+#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
+
+/* LCD Controller */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_lcd_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD),
+};
+
+struct platform_device s3c_device_lcd = {
+	.name		= "s3c2410-lcd",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
+	.resource	= s3c_lcd_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+	struct s3c2410fb_mach_info *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
+	if (npd) {
+		npd->displays = kmemdup(pd->displays,
+			sizeof(struct s3c2410fb_display) * npd->num_displays,
+			GFP_KERNEL);
+		if (!npd->displays)
+			printk(KERN_ERR "no memory for LCD display data\n");
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* MFC */
+
+#ifdef CONFIG_S5P_DEV_MFC
+static struct resource s5p_mfc_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_MFC),
+};
+
+struct platform_device s5p_device_mfc = {
+	.name		= "s5p-mfc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
+	.resource	= s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+struct platform_device s5p_device_mfc_l = {
+	.name		= "s5p-mfc-l",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device s5p_device_mfc_r = {
+	.name		= "s5p-mfc-r",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_MFC */
+
+/* MIPI CSIS */
+
+#ifdef CONFIG_S5P_DEV_CSIS0
+static struct resource s5p_mipi_csis0_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
+};
+
+struct platform_device s5p_device_mipi_csis0 = {
+	.name		= "s5p-mipi-csis",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_mipi_csis0_resource),
+	.resource	= s5p_mipi_csis0_resource,
+};
+#endif /* CONFIG_S5P_DEV_CSIS0 */
+
+#ifdef CONFIG_S5P_DEV_CSIS1
+static struct resource s5p_mipi_csis1_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
+};
+
+struct platform_device s5p_device_mipi_csis1 = {
+	.name		= "s5p-mipi-csis",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p_mipi_csis1_resource),
+	.resource	= s5p_mipi_csis1_resource,
+};
+#endif
+
+/* NAND */
+
+#ifdef CONFIG_S3C_DEV_NAND
+static struct resource s3c_nand_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
+};
+
+struct platform_device s3c_device_nand = {
+	.name		= "s3c2410-nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
+	.resource	= s3c_nand_resource,
+};
+
+/*
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */
+
+	npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
+				&s3c_device_nand);
+	if (!npd)
+		return;
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+#endif /* CONFIG_S3C_DEV_NAND */
+
+/* ONENAND */
+
+#ifdef CONFIG_S3C_DEV_ONENAND
+static struct resource s3c_onenand_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
+	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
+	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
+};
+
+struct platform_device s3c_device_onenand = {
+	.name		= "samsung-onenand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
+	.resource	= s3c_onenand_resources,
+};
+#endif /* CONFIG_S3C_DEV_ONENAND */
+
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+static struct resource s3c64xx_onenand1_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
+	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
+	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+	.name		= "samsung-onenand",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
+	.resource	= s3c64xx_onenand1_resources,
+};
+
+void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
+			 &s3c64xx_device_onenand1);
+}
+#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
+
+#ifdef CONFIG_S5P_DEV_ONENAND
+static struct resource s5p_onenand_resources[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
+	[1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
+	[2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
+};
+
+struct platform_device s5p_device_onenand = {
+	.name		= "s5pc110-onenand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
+	.resource	= s5p_onenand_resources,
+};
+#endif /* CONFIG_S5P_DEV_ONENAND */
+
+/* PMU */
+
+#ifdef CONFIG_PLAT_S5P
+static struct resource s5p_pmu_resource[] = {
+	DEFINE_RES_IRQ(IRQ_PMU)
+};
+
+struct platform_device s5p_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= ARRAY_SIZE(s5p_pmu_resource),
+	.resource	= s5p_pmu_resource,
+};
+
+static int __init s5p_pmu_init(void)
+{
+	platform_device_register(&s5p_device_pmu);
+	return 0;
+}
+arch_initcall(s5p_pmu_init);
+#endif /* CONFIG_PLAT_S5P */
+
+/* PWM Timer */
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/*
+ * since we already have an static mapping for the timer,
+ * we do not bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+#endif /* CONFIG_SAMSUNG_DEV_PWM */
+
+/* RTC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_rtc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_RTC),
+	[2] = DEFINE_RES_IRQ(IRQ_TICK),
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c2410-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_S3C_DEV_RTC
+static struct resource s3c_rtc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
+	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c64xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+#endif /* CONFIG_S3C_DEV_RTC */
+
+/* SDI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_sdi_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
+	[1] = DEFINE_RES_IRQ(IRQ_SDI),
+};
+
+struct platform_device s3c_device_sdi = {
+	.name		= "s3c2410-sdi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
+	.resource	= s3c_sdi_resource,
+};
+
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
+			 &s3c_device_sdi);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SPI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_spi0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c_device_spi0 = {
+	.name		= "s3c2410-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
+	.resource	= s3c_spi0_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+static struct resource s3c_spi1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c_device_spi1 = {
+	.name		= "s3c2410-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
+	.resource	= s3c_spi1_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Touchscreen */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_ts_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c2410-ts",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+	s3c_set_platdata(hard_s3c2410ts_info,
+			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_SAMSUNG_DEV_TS
+static struct resource s3c_ts_resource[] = {
+	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_TC),
+};
+
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c64xx-ts",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+	if (!pd)
+		pd = &default_ts_data;
+
+	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
+			 &s3c_device_ts);
+}
+#endif /* CONFIG_SAMSUNG_DEV_TS */
+
+/* TV */
+
+#ifdef CONFIG_S5P_DEV_TV
+
+static struct resource s5p_hdmi_resources[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
+	[1] = DEFINE_RES_IRQ(IRQ_HDMI),
+};
+
+struct platform_device s5p_device_hdmi = {
+	.name		= "s5p-hdmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
+	.resource	= s5p_hdmi_resources,
+};
+
+static struct resource s5p_sdo_resources[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_SDO),
+};
+
+struct platform_device s5p_device_sdo = {
+	.name		= "s5p-sdo",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
+	.resource	= s5p_sdo_resources,
+};
+
+static struct resource s5p_mixer_resources[] = {
+	[0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
+	[1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
+	[2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
+};
+
+struct platform_device s5p_device_mixer = {
+	.name		= "s5p-mixer",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
+	.resource	= s5p_mixer_resources,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+#endif /* CONFIG_S5P_DEV_TV */
+
+/* USB */
+
+#ifdef CONFIG_S3C_DEV_USB_HOST
+static struct resource s3c_usb_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_USBH),
+};
+
+struct platform_device s3c_device_ohci = {
+	.name		= "s3c2410-ohci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_resource),
+	.resource	= s3c_usb_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+/*
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
+			 &s3c_device_ohci);
+}
+#endif /* CONFIG_S3C_DEV_USB_HOST */
+
+/* USB Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_usbgadget_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
+	[1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usbgadget = {
+	.name		= "s3c2410-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
+	.resource	= s3c_usbgadget_resource,
+};
+
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB EHCI Host Controller */
+
+#ifdef CONFIG_S5P_DEV_USB_EHCI
+static struct resource s5p_ehci_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
+};
+
+struct platform_device s5p_device_ehci = {
+	.name		= "s5p-ehci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
+	.resource	= s5p_ehci_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
+{
+	struct s5p_ehci_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
+			&s5p_device_ehci);
+
+	if (!npd->phy_init)
+		npd->phy_init = s5p_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s5p_usb_phy_exit;
+}
+#endif /* CONFIG_S5P_DEV_USB_EHCI */
+
+/* USB HSOTG */
+
+#ifdef CONFIG_S3C_DEV_USB_HSOTG
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[1] = DEFINE_RES_IRQ(IRQ_OTG),
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S3C_DEV_USB_HSOTG */
+
+/* USB High Spped 2.0 Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_hsudc_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
+	[1] = DEFINE_RES_IRQ(IRQ_USBD),
+};
+
+struct platform_device s3c_device_usb_hsudc = {
+	.name		= "s3c-hsudc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
+	.resource	= s3c_hsudc_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
+{
+	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* WDT */
+
+#ifdef CONFIG_S3C_DEV_WDT
+static struct resource s3c_wdt_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
+	[1] = DEFINE_RES_IRQ(IRQ_WDT),
+};
+
+struct platform_device s3c_device_wdt = {
+	.name		= "s3c2410-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
+	.resource	= s3c_wdt_resource,
+};
+#endif /* CONFIG_S3C_DEV_WDT */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
new file mode 100644
index 0000000..93a994a
--- /dev/null
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -0,0 +1,132 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+#include <linux/export.h>
+
+#include <mach/dma.h>
+
+static inline bool pl330_filter(struct dma_chan *chan, void *param)
+{
+	struct dma_pl330_peri *peri = chan->private;
+	return peri->peri_id == (unsigned)param;
+}
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+				struct samsung_dma_info *info)
+{
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	struct dma_slave_config slave_config;
+
+	dma_cap_zero(mask);
+	dma_cap_set(info->cap, mask);
+
+	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+
+	if (info->direction == DMA_FROM_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.src_addr = info->fifo;
+		slave_config.src_addr_width = info->width;
+		slave_config.src_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else if (info->direction == DMA_TO_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.dst_addr = info->fifo;
+		slave_config.dst_addr_width = info->width;
+		slave_config.dst_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	}
+
+	return (unsigned)chan;
+}
+
+static int samsung_dmadev_release(unsigned ch,
+			struct s3c2410_dma_client *client)
+{
+	dma_release_channel((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+			struct samsung_dma_prep_info *info)
+{
+	struct scatterlist sg;
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_async_tx_descriptor *desc;
+
+	switch (info->cap) {
+	case DMA_SLAVE:
+		sg_init_table(&sg, 1);
+		sg_dma_len(&sg) = info->len;
+		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
+			    info->len, offset_in_page(info->buf));
+		sg_dma_address(&sg) = info->buf;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
+		break;
+	case DMA_CYCLIC:
+		desc = chan->device->device_prep_dma_cyclic(chan,
+			info->buf, info->len, info->period, info->direction);
+		break;
+	default:
+		dev_err(&chan->dev->device, "unsupported format\n");
+		return -EFAULT;
+	}
+
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+		return -EFAULT;
+	}
+
+	desc->callback = info->fp;
+	desc->callback_param = info->fp_param;
+
+	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+	dma_async_issue_pending((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+	return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+struct samsung_dma_ops dmadev_ops = {
+	.request	= samsung_dmadev_request,
+	.release	= samsung_dmadev_release,
+	.prepare	= samsung_dmadev_prepare,
+	.trigger	= samsung_dmadev_trigger,
+	.started	= NULL,
+	.flush		= samsung_dmadev_flush,
+	.stop		= samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+	return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
deleted file mode 100644
index 1c0b040..0000000
--- a/arch/arm/plat-samsung/gpio-config.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg, s3c_gpio_pull_t pull)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		s3c_gpio_setpull(start, pull);
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		ret = s3c_gpio_do_getcfg(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		pup = s3c_gpio_do_getpull(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-			      unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				   unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off * 2;
-	con &= 3;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				      unsigned int off)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	con = __raw_readl(reg);
-	con >>= shift;
-	con &= 0xf;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull,
-			 s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
-				     unsigned int off, s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = drvstr >> shift;
-	drvstr &= 0x3;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp &= ~(0x3 << shift);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif	/* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
deleted file mode 100644
index 7743c4b..0000000
--- a/arch/arm/plat-samsung/gpio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	spin_lock_init(&chip->lock);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct s3c_gpio_chip *s3c_chip = container_of(chip,
-			struct s3c_gpio_chip, chip);
-
-	return s3c_chip->irq_base + offset;
-}
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
index a281568..a927bee 100644
--- a/arch/arm/plat-samsung/include/plat/adc-core.h
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -20,7 +20,7 @@
 /* re-define device name depending on support. */
 static inline void s3c_adc_setname(char *name)
 {
-#ifdef CONFIG_SAMSUNG_DEV_ADC
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_adc.name = name;
 #endif
 }
diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
rename to arch/arm/plat-samsung/include/plat/audio-simtec.h
index de5e88f..5345364 100644
--- a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
+++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
  *
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h
similarity index 86%
rename from arch/arm/plat-s5p/include/plat/camport.h
rename to arch/arm/plat-samsung/include/plat/camport.h
index 71688c8..a5708bf 100644
--- a/arch/arm/plat-s5p/include/plat/camport.h
+++ b/arch/arm/plat-samsung/include/plat/camport.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef PLAT_S5P_CAMPORT_H_
-#define PLAT_S5P_CAMPORT_H_ __FILE__
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
 
 enum s5p_camport_id {
 	S5P_CAMPORT_A,
@@ -25,4 +25,4 @@
 int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
 int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
 
-#endif
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h
similarity index 87%
rename from arch/arm/plat-s3c24xx/include/plat/common-smdk.h
rename to arch/arm/plat-samsung/include/plat/common-smdk.h
index 58d9094..ba028f1 100644
--- a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h
+++ b/arch/arm/plat-samsung/include/plat/common-smdk.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
+/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
similarity index 98%
rename from arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
rename to arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index d623235..dac4760 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
  *
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -195,7 +195,8 @@
 
 extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no);
 
 /* exports and utilities for debugfs */
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 54f370f..40fd7b6 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -25,7 +25,6 @@
 
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
-#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
 #define S3C64XX_CPU_MASK	0xFFFFF000
 
 #define S5P6440_CPU_ID		0x56440000
@@ -50,7 +49,8 @@
 }
 
 IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
@@ -69,7 +69,7 @@
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
 # define soc_is_s3c64xx()	0
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 24ebb1e..ab633c9 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -30,30 +30,24 @@
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
-extern struct platform_device s3c_device_timer[];
-
+extern struct platform_device s3c64xx_device_ac97;
 extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
-
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
 extern struct platform_device s3c64xx_device_spi0;
 extern struct platform_device s3c64xx_device_spi1;
 
-extern struct platform_device samsung_asoc_dma;
-extern struct platform_device samsung_asoc_idma;
-
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
-
-extern struct platform_device s3c64xx_device_ac97;
-
-extern struct platform_device s3c_device_ts;
-
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_cfcon;
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_i2c2;
@@ -62,93 +56,90 @@
 extern struct platform_device s3c_device_i2c5;
 extern struct platform_device s3c_device_i2c6;
 extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
 extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-extern struct platform_device s3c_device_hsmmc3;
-extern struct platform_device s3c_device_cfcon;
-
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_sdi;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s5pc100_device_spi0;
-extern struct platform_device s5pc100_device_spi1;
-extern struct platform_device s5pc100_device_spi2;
-extern struct platform_device s5pv210_device_spi0;
-extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p64x0_device_spi0;
-extern struct platform_device s5p64x0_device_spi1;
-
-extern struct platform_device s3c_device_hwmon;
-
-extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s5p_device_onenand;
-
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_timer[];
 extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_usb_hsudc;
+extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_spdif;
+extern struct platform_device s5p_device_ehci;
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+extern struct platform_device s5p_device_fimc3;
+extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_fimd0;
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_i2c_hdmiphy;
+extern struct platform_device s5p_device_mfc;
+extern struct platform_device s5p_device_mfc_l;
+extern struct platform_device s5p_device_mfc_r;
+extern struct platform_device s5p_device_mipi_csis0;
+extern struct platform_device s5p_device_mipi_csis1;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_onenand;
+extern struct platform_device s5p_device_sdo;
 
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_pd[];
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_dwmci;
-
-extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
+extern struct platform_device s5p6440_device_pcm;
 
 extern struct platform_device s5p6450_device_iis0;
 extern struct platform_device s5p6450_device_iis1;
 extern struct platform_device s5p6450_device_iis2;
 extern struct platform_device s5p6450_device_pcm0;
 
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
+
 extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
 extern struct platform_device s5pc100_device_iis0;
 extern struct platform_device s5pc100_device_iis1;
 extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
 extern struct platform_device s5pc100_device_spdif;
+extern struct platform_device s5pc100_device_spi0;
+extern struct platform_device s5pc100_device_spi1;
+extern struct platform_device s5pc100_device_spi2;
 
-extern struct platform_device samsung_device_keypad;
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_spdif;
+extern struct platform_device s5pv210_device_spi0;
+extern struct platform_device s5pv210_device_spi1;
 
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-
-extern struct platform_device s5p_device_ehci;
-
+extern struct platform_device exynos4_device_ac97;
+extern struct platform_device exynos4_device_ahci;
+extern struct platform_device exynos4_device_dwmci;
+extern struct platform_device exynos4_device_i2s0;
+extern struct platform_device exynos4_device_i2s1;
+extern struct platform_device exynos4_device_i2s2;
+extern struct platform_device exynos4_device_pcm0;
+extern struct platform_device exynos4_device_pcm1;
+extern struct platform_device exynos4_device_pcm2;
+extern struct platform_device exynos4_device_pd[];
+extern struct platform_device exynos4_device_spdif;
 extern struct platform_device exynos4_device_sysmmu;
 
+extern struct platform_device samsung_asoc_dma;
+extern struct platform_device samsung_asoc_idma;
+extern struct platform_device samsung_device_keypad;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
new file mode 100644
index 0000000..4c1a363
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -0,0 +1,63 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+
+struct samsung_dma_prep_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	dma_addr_t buf;
+	unsigned long period;
+	unsigned long len;
+	void (*fp)(void *data);
+	void *fp_param;
+};
+
+struct samsung_dma_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	enum dma_slave_buswidth width;
+	dma_addr_t fifo;
+	struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_ops {
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
+	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
+	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+	int (*trigger)(unsigned ch);
+	int (*started)(unsigned ch);
+	int (*flush)(unsigned ch);
+	int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+	if (samsung_dma_is_dmadev())
+		return samsung_dmadev_get_ops();
+	else
+		return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
similarity index 84%
rename from arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
rename to arch/arm/plat-samsung/include/plat/dma-pl330.h
index 8107442..2e55e59 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -8,11 +8,8 @@
  * (at your option) any later version.
  */
 
-#ifndef	__S3C_DMA_PL330_H_
-#define	__S3C_DMA_PL330_H_
-
-#define S3C2410_DMAF_AUTOSTART		(1 << 0)
-#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
 
 /*
  * PL330 can assign any channel to communicate with
@@ -20,7 +17,7 @@
  * For the sake of consistency across client drivers,
  * We keep the channel names unchanged and only add
  * missing peripherals are added.
- * Order is not important since S3C PL330 API driver
+ * Order is not important since DMA PL330 API driver
  * use these just as IDs.
  */
 enum dma_ch {
@@ -88,11 +85,20 @@
 	DMACH_MAX,
 };
 
-static inline bool s3c_dma_has_circular(void)
+struct s3c2410_dma_client {
+	char	*name;
+};
+
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
-#include <plat/dma.h>
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return true;
+}
 
-#endif	/* __S3C_DMA_PL330_H_ */
+#include <plat/dma-ops.h>
+
+#endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index ab9bce63..1c1ed54 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -41,7 +41,7 @@
 
 	void	(*direction)(struct s3c2410_dma_chan *chan,
 			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
+			     enum dma_data_direction dir);
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 8c273b7..b906112 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -10,17 +10,14 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/dma-mapping.h>
+
 enum s3c2410_dma_buffresult {
 	S3C2410_RES_OK,
 	S3C2410_RES_ERR,
 	S3C2410_RES_ABORT
 };
 
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
 /* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
@@ -112,7 +109,7 @@
 */
 
 extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum s3c2410_dmasrc source, unsigned long devaddr);
+		enum dma_data_direction source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
@@ -126,3 +123,4 @@
 extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 
+#include <plat/dma-ops.h>
diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
similarity index 84%
rename from arch/arm/plat-s5p/include/plat/ehci.h
rename to arch/arm/plat-samsung/include/plat/ehci.h
index 6ae6810..5f28cae 100644
--- a/arch/arm/plat-s5p/include/plat/ehci.h
+++ b/arch/arm/plat-samsung/include/plat/ehci.h
@@ -8,8 +8,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_EHCI_H
-#define __PLAT_S5P_EHCI_H
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
 
 struct s5p_ehci_platdata {
 	int (*phy_init)(struct platform_device *pdev, int type);
@@ -18,4 +18,4 @@
 
 extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
 
-#endif /* __PLAT_S5P_EHCI_H */
+#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h
similarity index 87%
rename from arch/arm/plat-s5p/include/plat/exynos4.h
rename to arch/arm/plat-samsung/include/plat/exynos4.h
index f680a14..f546e88 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-samsung/include/plat/exynos4.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/exynos4.h
+/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -18,8 +18,8 @@
 extern void exynos4212_register_clocks(void);
 extern void exynos4_setup_clocks(void);
 
-#ifdef CONFIG_ARCH_EXYNOS4
-extern  int exynos4_init(void);
+#ifdef CONFIG_ARCH_EXYNOS
+extern  int exynos_init(void);
 extern void exynos4_init_irq(void);
 extern void exynos4_map_io(void);
 extern void exynos4_init_clocks(int xtal);
@@ -31,5 +31,5 @@
 #define exynos4_init_clocks NULL
 #define exynos4_init_uarts NULL
 #define exynos4_map_io NULL
-#define exynos4_init NULL
+#define exynos_init NULL
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
new file mode 100644
index 0000000..4e5d958
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
@@ -0,0 +1,72 @@
+/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_FB_S3C2410_H
+#define __ASM_PLAT_FB_S3C2410_H __FILE__
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4..0fedf47 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,11 @@
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h
similarity index 87%
rename from arch/arm/plat-s3c24xx/include/plat/fiq.h
rename to arch/arm/plat-samsung/include/plat/fiq.h
index 8521b83..535d06a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/fiq.h
+++ b/arch/arm/plat-samsung/include/plat/fiq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+/* linux/arch/arm/plat-samsung/include/plat/fiq.h
  *
  * Copyright (c) 2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 9a4e53d..a181d7c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -1,11 +1,11 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Platform - GPIO pin configuration helper definitions
+ * Samsung Platform - GPIO pin configuration helper definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -24,120 +24,30 @@
  * by disabling interrupts.
 */
 
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int config)
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+					 unsigned int off, unsigned int config)
 {
 	return (chip->config->set_config)(chip, off, config);
 }
 
-static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
-					  unsigned int off)
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+					      unsigned int off)
 {
 	return (chip->config->get_config)(chip, off);
 }
 
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
-				      unsigned int off, s3c_gpio_pull_t pull)
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+					  unsigned int off, samsung_gpio_pull_t pull)
 {
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
-static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
-						  unsigned int off)
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+							  unsigned int off)
 {
 	return chip->config->get_pull(chip, off);
 }
 
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
- * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- * @sa s3c_gpio_getcfg_s3c64xx_4bit
- */
-extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-					  unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to s3c_gpio_setcfg_s3c64xx_4bit().
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- */
-extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					     unsigned int off);
-
 /* Pull-{up,down} resistor controls.
  *
  * S3C2410,S3C2440 = Pull-UP,
@@ -147,7 +57,7 @@
  */
 
 /**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -155,11 +65,11 @@
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-up resistor.
  */
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+				    unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
  * @chip: The gpio chip that is being configured
  * @off: The offset for the GPIO being configured
  * @param: pull: The pull mode being requested
@@ -167,11 +77,13 @@
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-down resistor.
  */
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-				  unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+				      unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -183,45 +95,46 @@
  *	01 = Pull-up resistor connected
  *	10 = Pull-down resistor connected
  */
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-				   unsigned int off, s3c_gpio_pull_t pull);
-
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				       unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					       unsigned int off);
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						       unsigned int off);
 
 /**
- * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1up.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+						    unsigned int off);
 
 /**
- * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1down.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+						      unsigned int off);
 
 /**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -233,19 +146,18 @@
  *	10 = Pull-down resistor connected
  *	x1 = No pull up resistor
  */
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				    unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
  * @chip: The gpio chip that the GPIO pin belongs to.
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
 						unsigned int off);
 
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1762dcb..df8155b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,14 +24,16 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+#include<linux/types.h>
+
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
  * @set_pull: Set the current pull configuraiton for the GPIO
@@ -44,20 +46,20 @@
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
  *
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
  * @sa s3c_gpio_getcfg
  * @sa s3c_gpio_setpull
  * @sa s3c_gpio_getpull
  */
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
 	unsigned int	cfg_eint;
 
-	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-				    s3c_gpio_pull_t pull);
+	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+				    samsung_gpio_pull_t pull);
 
-	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
 			       unsigned config);
 };
 
@@ -69,7 +71,7 @@
 #define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
 #define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
 
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
 	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
 
 /**
@@ -128,9 +130,9 @@
  * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
-#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
 
 /**
  * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
@@ -143,7 +145,7 @@
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
 /**
  * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
@@ -151,7 +153,7 @@
  *
  * Read the pull resistor value for the specified pin.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
 /* configure `all` aspects of an gpio */
 
@@ -170,7 +172,7 @@
  * @sa s3c_gpio_cfgpin_range
  */
 extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg, s3c_gpio_pull_t pull);
+				 unsigned int cfg, samsung_gpio_pull_t pull);
 
 static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
 					   unsigned int cfg)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index 8cad4cf..1fe6917 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -25,22 +25,22 @@
  * specific code.
 */
 
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_pm - power management (suspend/resume) information
+ * struct samsung_gpio_pm - power management (suspend/resume) information
  * @save: Routine to save the state of the GPIO block
  * @resume: Routine to resume the GPIO block.
  */
-struct s3c_gpio_pm {
-	void (*save)(struct s3c_gpio_chip *chip);
-	void (*resume)(struct s3c_gpio_chip *chip);
+struct samsung_gpio_pm {
+	void (*save)(struct samsung_gpio_chip *chip);
+	void (*resume)(struct samsung_gpio_chip *chip);
 };
 
-struct s3c_gpio_cfg;
+struct samsung_gpio_cfg;
 
 /**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @group: The group register number for gpio interrupt support.
@@ -60,10 +60,10 @@
  * CPU cores trying to get one lock for different GPIO banks, where each
  * bank of GPIO has its own register space and configuration registers.
  */
-struct s3c_gpio_chip {
+struct samsung_gpio_chip {
 	struct gpio_chip	chip;
-	struct s3c_gpio_cfg	*config;
-	struct s3c_gpio_pm	*pm;
+	struct samsung_gpio_cfg	*config;
+	struct samsung_gpio_pm	*pm;
 	void __iomem		*base;
 	int			irq_base;
 	int			group;
@@ -73,58 +73,11 @@
 #endif
 };
 
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
 {
-	return container_of(gpc, struct s3c_gpio_chip, chip);
+	return container_of(gpc, struct samsung_gpio_chip, chip);
 }
 
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-/**
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips);
-extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-
-extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
-extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
-
-
 /**
  * samsung_gpiolib_to_irq - convert gpio pin to irq number
  * @chip: The gpio chip that the pin belongs to.
@@ -136,36 +89,36 @@
 extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
 
 /* exported for core SoC support to change */
-extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
 
 #ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
 {
 	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
 }
 #else
-/* machine specific code should provide s3c_gpiolib_getchip */
+/* machine specific code should provide samsung_gpiolib_getchip */
 
 #include <mach/gpio-track.h>
 
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
 #endif
 
 #ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
 #define __gpio_pm(x) x
 #else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
 #define __gpio_pm(x) NULL
 
 #endif /* CONFIG_PM */
 
 /* locking wrappers to deal with multiple access to the same gpio bank */
-#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
new file mode 100644
index 0000000..bab1392
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -0,0 +1,98 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
+*/
+
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
+	s3c_gpio_cfgpin(pin, cfg);
+}
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 56b0059..51d52e7 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -60,6 +60,7 @@
 extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h
similarity index 81%
rename from arch/arm/plat-s3c24xx/include/plat/irq.h
rename to arch/arm/plat-samsung/include/plat/irq.h
index ec087d6..e21a89b 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-samsung/include/plat/irq.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
+/* linux/arch/arm/plat-samsung/include/plat/irq.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -25,9 +25,9 @@
 extern struct irq_chip s3c_irq_level_chip;
 extern struct irq_chip s3c_irq_chip;
 
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
+static inline void s3c_irqsub_mask(unsigned int irqno,
+				   unsigned int parentbit,
+				   int subcheck)
 {
 	unsigned long mask;
 	unsigned long submask;
@@ -39,17 +39,16 @@
 
 	/* check to see if we need to mask the parent IRQ */
 
-	if ((submask  & subcheck) == subcheck) {
+	if ((submask  & subcheck) == subcheck)
 		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
 
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
 
 }
 
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+static inline void s3c_irqsub_unmask(unsigned int irqno,
+				     unsigned int parentbit)
 {
 	unsigned long mask;
 	unsigned long submask;
@@ -66,8 +65,9 @@
 }
 
 
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+static inline void s3c_irqsub_maskack(unsigned int irqno,
+				      unsigned int parentmask,
+				      unsigned int group)
 {
 	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
 
@@ -86,8 +86,9 @@
 	}
 }
 
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+static inline void s3c_irqsub_ack(unsigned int irqno,
+				  unsigned int parentmask,
+				  unsigned int group)
 {
 	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
 
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
similarity index 93%
rename from arch/arm/plat-s5p/include/plat/irqs.h
rename to arch/arm/plat-samsung/include/plat/irqs.h
index 144dbfc..08d1a7e 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_IRQS_H
-#define __ASM_PLAT_S5P_IRQS_H __FILE__
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
 
 /* we keep the first set of CPU IRQs out of the range of
  * the ISA space, so that the PC104 has them to itself
@@ -77,4 +77,4 @@
 #define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
 #define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
 
-#endif /* __ASM_PLAT_S5P_IRQS_H */
+#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
similarity index 90%
rename from arch/arm/plat-s3c24xx/include/plat/mci.h
rename to arch/arm/plat-samsung/include/plat/mci.h
index 2ac2b21..c42d317 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-samsung/include/plat/mci.h
@@ -27,11 +27,11 @@
  * to a non-zero value, otherwise the default of 3.2-3.4V is used.
  */
 struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect : 1;
-	unsigned int	no_detect : 1;
-	unsigned int	wprotect_invert : 1;
-	unsigned int	detect_invert : 1;   /* set => detect active high. */
-	unsigned int	use_dma : 1;
+	unsigned int	no_wprotect:1;
+	unsigned int	no_detect:1;
+	unsigned int	wprotect_invert:1;
+	unsigned int	detect_invert:1;	/* set => detect active high */
+	unsigned int	use_dma:1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
similarity index 89%
rename from arch/arm/plat-s5p/include/plat/mfc.h
rename to arch/arm/plat-samsung/include/plat/mfc.h
index 6697f8c..ac13227 100644
--- a/arch/arm/plat-s5p/include/plat/mfc.h
+++ b/arch/arm/plat-samsung/include/plat/mfc.h
@@ -7,8 +7,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_MFC_H
-#define __PLAT_S5P_MFC_H
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
 
 /**
  * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
@@ -24,4 +24,4 @@
 void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize);
 
-#endif /* __PLAT_S5P_MFC_H */
+#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
similarity index 90%
rename from arch/arm/plat-s5p/include/plat/mipi_csis.h
rename to arch/arm/plat-samsung/include/plat/mipi_csis.h
index 9bd254c..c45b1e8 100644
--- a/arch/arm/plat-s5p/include/plat/mipi_csis.h
+++ b/arch/arm/plat-samsung/include/plat/mipi_csis.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef PLAT_S5P_MIPI_CSIS_H_
-#define PLAT_S5P_MIPI_CSIS_H_ __FILE__
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
 
 struct platform_device;
 
@@ -40,4 +40,4 @@
  */
 int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
 
-#endif /* PLAT_S5P_MIPI_CSIS_H_ */
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h
new file mode 100644
index 0000000..357af7c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pll.h
@@ -0,0 +1,323 @@
+/* linux/arch/arm/plat-samsung/include/plat/pll.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL codes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/div64.h>
+
+#define S3C24XX_PLL_MDIV_MASK		(0xFF)
+#define S3C24XX_PLL_PDIV_MASK		(0x1F)
+#define S3C24XX_PLL_SDIV_MASK		(0x3)
+#define S3C24XX_PLL_MDIV_SHIFT		(12)
+#define S3C24XX_PLL_PDIV_SHIFT		(4)
+#define S3C24XX_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#define S3C2416_PLL_MDIV_MASK		(0x3FF)
+#define S3C2416_PLL_PDIV_MASK		(0x3F)
+#define S3C2416_PLL_SDIV_MASK		(0x7)
+#define S3C2416_PLL_MDIV_SHIFT		(14)
+#define S3C2416_PLL_PDIV_SHIFT		(5)
+#define S3C2416_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c2416_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned int)fvco;
+}
+
+#define S3C6400_PLL_MDIV_MASK		(0x3FF)
+#define S3C6400_PLL_PDIV_MASK		(0x3F)
+#define S3C6400_PLL_SDIV_MASK		(0x7)
+#define S3C6400_PLL_MDIV_SHIFT		(16)
+#define S3C6400_PLL_PDIV_SHIFT		(8)
+#define S3C6400_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL6553X_MDIV_MASK	(0x7F)
+#define PLL6553X_PDIV_MASK	(0x1F)
+#define PLL6553X_SDIV_MASK	(0x3)
+#define PLL6553X_KDIV_MASK	(0xFFFF)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+/* CON0 bit-fields */
+#define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL46XX_PDIV_MASK	(0x3F)
+#define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
+#define PLL46XX_MDIV_SHIFT	(16)
+#define PLL46XX_PDIV_SHIFT	(8)
+#define PLL46XX_SDIV_SHIFT	(0)
+
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
+enum pll46xx_type_t {
+	pll_4600,
+	pll_4650,
+	pll_4650c,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1,
+					    enum pll46xx_type_t pll_type)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	if (pll_type == pll_4600) {
+		tmp *= (mdiv << 16) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 16;
+	} else {
+		tmp *= (mdiv << 10) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 10;
+	}
+
+	return result;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL65XX_MDIV_MASK	(0x3FF)
+#define PLL65XX_PDIV_MASK	(0x3F)
+#define PLL65XX_SDIV_MASK	(0x7)
+#define PLL65XX_MDIV_SHIFT	(16)
+#define PLL65XX_PDIV_SHIFT	(8)
+#define PLL65XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h
deleted file mode 100644
index b8b7e1d..0000000
--- a/arch/arm/plat-samsung/include/plat/pll6553x.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/pll6553x.h
- *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL6553x PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
-
-#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
-#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
-#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-#define PLL6553X_KDIV_MASK	(0xffff)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll0, u32 pll1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll1 & PLL6553X_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f674991..dcf6870 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -165,20 +165,20 @@
 extern void s3c_pm_configure_extint(void);
 
 /**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
  *
  * Restore the state of the GPIO pins after sleep, which may involve ensuring
  * that we do not glitch the state of the pins from that the bootloader's
  * resume code has done.
 */
-extern void s3c_pm_restore_gpios(void);
+extern void samsung_pm_restore_gpios(void);
 
 /**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
  *
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
  */
-extern void s3c_pm_save_gpios(void);
+extern void samsung_pm_save_gpios(void);
 
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h
similarity index 68%
rename from arch/arm/mach-exynos4/include/mach/pwm-clock.h
rename to arch/arm/plat-samsung/include/plat/pwm-clock.h
index 8e12090..bf6a60e 100644
--- a/arch/arm/mach-exynos4/include/mach/pwm-clock.h
+++ b/arch/arm/plat-samsung/include/plat/pwm-clock.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h
+/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -8,17 +8,15 @@
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * EXYNOS4 - pwm clock and timer support
+ * SAMSUNG - pwm clock and timer support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
+#ifndef __ASM_PLAT_PWM_CLOCK_H
+#define __ASM_PLAT_PWM_CLOCK_H __FILE__
 
 /**
  * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
@@ -29,7 +27,14 @@
  */
 static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
 {
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+	if (soc_is_s3c24xx())
+		return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s3c64xx() || soc_is_s5pc100())
+		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		return 0;
+	else
+		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
 }
 
 /**
@@ -41,7 +46,10 @@
  */
 static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
 {
-	return 1 << tcfg1;
+	if (soc_is_s3c24xx())
+		return 1 << (tcfg1 + 1);
+	else
+		return 1 << tcfg1;
 }
 
 /**
@@ -51,7 +59,10 @@
  */
 static inline unsigned int pwm_tdiv_has_div1(void)
 {
-	return 1;
+	if (soc_is_s3c24xx())
+		return 0;
+	else
+		return 1;
 }
 
 /**
@@ -62,9 +73,9 @@
  */
 static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
 {
-	return ilog2(div);
+	if (soc_is_s3c24xx())
+		return ilog2(div) - 1;
+	else
+		return ilog2(div);
 }
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
+#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index 035e8c3..7061210 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -20,6 +20,7 @@
 #define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
 #define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
 #define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
 #define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
 #define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
 #define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
@@ -33,6 +34,7 @@
 #define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
 #define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
 #define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2416_ADCCON_RESSEL		(1 << 3)
 #define S3C2410_ADCCON_STDBM		(1<<2)
 #define S3C2410_ADCCON_READ_START	(1<<1)
 #define S3C2410_ADCCON_ENABLE_START	(1<<0)
@@ -40,6 +42,7 @@
 
 
 /* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
 #define S3C2410_ADCTSC_YM_SEN		(1<<7)
 #define S3C2410_ADCTSC_YP_SEN		(1<<6)
 #define S3C2410_ADCTSC_XM_SEN		(1<<5)
diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h
new file mode 100644
index 0000000..178bccb
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_DMA_H
+#define __ASM_PLAT_REGS_DMA_H __FILE__
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1 << 0)
+#define S3C2410_DISRCC_APB		(1 << 1)
+
+#define S3C2410_DMASKTRIG_STOP		(1 << 2)
+#define S3C2410_DMASKTRIG_ON		(1 << 1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
+
+#define S3C2410_DCON_DEMAND		(0 << 31)
+#define S3C2410_DCON_HANDSHAKE		(1 << 31)
+#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
+#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
+
+#define S3C2410_DCON_INTREQ		(1 << 29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
+#define S3C2410_DCON_CH0_UART0		(1 << 24)
+#define S3C2410_DCON_CH0_SDI		(2 << 24)
+#define S3C2410_DCON_CH0_TIMER		(3 << 24)
+#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
+#define S3C2410_DCON_CH1_UART1		(1 << 24)
+#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
+#define S3C2410_DCON_CH1_SPI		(3 << 24)
+#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
+#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
+#define S3C2410_DCON_CH2_SDI		(2 << 24)
+#define S3C2410_DCON_CH2_TIMER		(3 << 24)
+#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
+
+#define S3C2410_DCON_CH3_UART2		(0 << 24)
+#define S3C2410_DCON_CH3_SDI		(1 << 24)
+#define S3C2410_DCON_CH3_SPI		(2 << 24)
+#define S3C2410_DCON_CH3_TIMER		(3 << 24)
+#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7 << 24)
+
+#define S3C2410_DCON_BYTE		(0 << 20)
+#define S3C2410_DCON_HALFWORD		(1 << 20)
+#define S3C2410_DCON_WORD		(2 << 20)
+
+#define S3C2410_DCON_AUTORELOAD		(0 << 22)
+#define S3C2410_DCON_NORELOAD		(1 << 22)
+#define S3C2410_DCON_HWTRIG		(1 << 23)
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DIDSTC_CHKINT		(1 << 2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
+#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
+#define S3C2440_DCON_CH1_SDI		(6 << 24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
+#define S3C2440_DCON_CH2_MICIN		(6 << 24)
+
+#define S3C2440_DCON_CH3_MICIN		(5 << 24)
+#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+#endif /* CONFIG_CPU_S3C2412 */
+
+#ifdef CONFIG_CPU_S3C2443
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+#endif /* CONFIG_CPU_S3C2443 */
+
+#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h
new file mode 100644
index 0000000..a18d35e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-iis.h
@@ -0,0 +1,70 @@
+/* arch/arm/plat-samsung/include/plat/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON			(0x00)
+
+#define S3C2410_IISCON_LRINDEX		(1 << 8)
+#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
+#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
+#define S3C2410_IISCON_TXDMAEN		(1 << 5)
+#define S3C2410_IISCON_RXDMAEN		(1 << 4)
+#define S3C2410_IISCON_TXIDLE		(1 << 3)
+#define S3C2410_IISCON_RXIDLE		(1 << 2)
+#define S3C2410_IISCON_PSCEN		(1 << 1)
+#define S3C2410_IISCON_IISEN		(1 << 0)
+
+#define S3C2410_IISMOD			(0x04)
+
+#define S3C2440_IISMOD_MPLL		(1 << 9)
+#define S3C2410_IISMOD_SLAVE		(1 << 8)
+#define S3C2410_IISMOD_NOXFER		(0 << 6)
+#define S3C2410_IISMOD_RXMODE		(1 << 6)
+#define S3C2410_IISMOD_TXMODE		(2 << 6)
+#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
+#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
+#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
+#define S3C2410_IISMOD_IIS		(0 << 4)
+#define S3C2410_IISMOD_MSB		(1 << 4)
+#define S3C2410_IISMOD_8BIT		(0 << 3)
+#define S3C2410_IISMOD_16BIT		(1 << 3)
+#define S3C2410_IISMOD_BITMASK		(1 << 3)
+#define S3C2410_IISMOD_256FS		(0 << 2)
+#define S3C2410_IISMOD_384FS		(1 << 2)
+#define S3C2410_IISMOD_16FS		(0 << 0)
+#define S3C2410_IISMOD_32FS		(1 << 0)
+#define S3C2410_IISMOD_48FS		(2 << 0)
+#define S3C2410_IISMOD_FS_MASK		(3 << 0)
+
+#define S3C2410_IISPSR			(0x08)
+
+#define S3C2410_IISPSR_INTMASK		(31 << 5)
+#define S3C2410_IISPSR_INTSHIFT		(5)
+#define S3C2410_IISPSR_EXTMASK		(31 << 0)
+#define S3C2410_IISPSR_EXTSHFIT		(0)
+
+#define S3C2410_IISFCON			(0x0c)
+
+#define S3C2410_IISFCON_TXDMA		(1 << 15)
+#define S3C2410_IISFCON_RXDMA		(1 << 14)
+#define S3C2410_IISFCON_TXENABLE	(1 << 13)
+#define S3C2410_IISFCON_RXENABLE	(1 << 12)
+#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT		(6)
+#define S3C2410_IISFCON_RXMASK		(0x3f)
+#define S3C2410_IISFCON_RXSHIFT		(0)
+
+#define S3C2410_IISFIFO			(0x10)
+
+#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h
new file mode 100644
index 0000000..552fe7c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-spi.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-samsung/include/plat/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+#define S3C2410_SPI1		(0x20)
+#define S3C2412_SPI1		(0x100)
+
+#define S3C2410_SPCON		(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
+
+#define S3C2410_SPSTA		(0x04)
+
+#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG	(1 << 3)
+
+#define S3C2410_SPPIN		(0x08)
+
+#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	(1 << 1)
+#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
+
+#define S3C2410_SPPRE		(0x0C)
+#define S3C2410_SPTDAT		(0x10)
+#define S3C2410_SPRDAT		(0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h
similarity index 89%
rename from arch/arm/plat-s5p/include/plat/regs-srom.h
rename to arch/arm/plat-samsung/include/plat/regs-srom.h
index f121ab5..9b6729c 100644
--- a/arch/arm/plat-s5p/include/plat/regs-srom.h
+++ b/arch/arm/plat-samsung/include/plat/regs-srom.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_REGS_SROM_H
-#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
 
 #include <mach/map.h>
 
@@ -51,4 +51,4 @@
 #define S5P_SROM_BCX__TCOS__SHIFT		24
 #define S5P_SROM_BCX__TACS__SHIFT		28
 
-#endif /* __ASM_PLAT_S5P_REGS_SROM_H */
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h
new file mode 100644
index 0000000..4003d3d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-udc.h
@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+*/
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
+#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
+#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT		(0x00)
+
+#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01)
+#define S3C2410_UDC_INDEX_EP2		(0x02)
+#define S3C2410_UDC_INDEX_EP3		(0x03)
+#define S3C2410_UDC_INDEX_EP4		(0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
+#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
+
+#define S3C2410_UDC_MAXP_8		(1 << 0)
+#define S3C2410_UDC_MAXP_16		(1 << 1)
+#define S3C2410_UDC_MAXP_32		(1 << 2)
+#define S3C2410_UDC_MAXP_64		(1 << 3)
+
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h
similarity index 66%
rename from arch/arm/plat-s5p/include/plat/reset.h
rename to arch/arm/plat-samsung/include/plat/reset.h
index 335e978..32ca517 100644
--- a/arch/arm/plat-s5p/include/plat/reset.h
+++ b/arch/arm/plat-samsung/include/plat/reset.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/reset.h
+/* linux/arch/arm/plat-samsung/include/plat/reset.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
@@ -8,9 +8,9 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_PLAT_S5P_RESET_H
-#define __ASM_PLAT_S5P_RESET_H __FILE__
+#ifndef __PLAT_SAMSUNG_RESET_H
+#define __PLAT_SAMSUNG_RESET_H __FILE__
 
 extern void (*s5p_reset_hook)(void);
 
-#endif /* __ASM_PLAT_S5P_RESET_H */
+#endif /* __PLAT_SAMSUNG_RESET_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
deleted file mode 100644
index bf5e2a9..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __S3C_PL330_PDATA_H
-#define __S3C_PL330_PDATA_H
-
-#include <plat/s3c-dma-pl330.h>
-
-/*
- * Every PL330 DMAC has max 32 peripheral interfaces,
- * of which some may be not be really used in your
- * DMAC's configuration.
- * Populate this array of 32 peri i/fs with relevant
- * channel IDs for used peri i/f and DMACH_MAX for
- * those unused.
- *
- * The platforms just need to provide this info
- * to the S3C DMA API driver for PL330.
- */
-struct s3c_pl330_platdata {
-	enum dma_ch peri[32];
-};
-
-#endif /* __S3C_PL330_PDATA_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h
similarity index 93%
rename from arch/arm/plat-s3c24xx/include/plat/s3c2410.h
rename to arch/arm/plat-samsung/include/plat/s3c2410.h
index 82ab4aad..3986497 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2410.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
similarity index 92%
rename from arch/arm/plat-s3c24xx/include/plat/s3c2412.h
rename to arch/arm/plat-samsung/include/plat/s3c2412.h
index bb15d3b..5bcfd14 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2412.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
similarity index 92%
rename from arch/arm/plat-s3c24xx/include/plat/s3c2416.h
rename to arch/arm/plat-samsung/include/plat/s3c2416.h
index dc3c090..a764f85 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
  *
  * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
similarity index 87%
rename from arch/arm/plat-s3c24xx/include/plat/s3c2443.h
rename to arch/arm/plat-samsung/include/plat/s3c2443.h
index a19715f..7fae1a0 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -37,10 +37,11 @@
 struct clk;	/* some files don't need clk.h otherwise */
 
 typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
 
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       unsigned int *divs, int nr_divs,
+				       int divmask);
 
 extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
 extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/s3c244x.h
rename to arch/arm/plat-samsung/include/plat/s3c244x.h
index 89e8d0a..ea0c961 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-samsung/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
similarity index 94%
rename from arch/arm/mach-s3c64xx/include/mach/s3c6400.h
rename to arch/arm/plat-samsung/include/plat/s3c6400.h
index f86958d..37d428a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
+++ b/arch/arm/plat-samsung/include/plat/s3c6400.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
similarity index 92%
rename from arch/arm/mach-s3c64xx/include/mach/s3c6410.h
rename to arch/arm/plat-samsung/include/plat/s3c6410.h
index 24f1141..20a6675 100644
--- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+++ b/arch/arm/plat-samsung/include/plat/s3c6410.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
  *
  * Copyright 2008 Openmoko,  Inc.
  * Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
similarity index 96%
rename from arch/arm/plat-s5p/include/plat/s5p-clock.h
rename to arch/arm/plat-samsung/include/plat/s5p-clock.h
index 769b5bd..984bf9e 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
  *
  * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/s5p-time.h
rename to arch/arm/plat-samsung/include/plat/s5p-time.h
index 575e881..3a70aeb 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-time.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
  *
  * Copyright 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/s5p6440.h
rename to arch/arm/plat-samsung/include/plat/s5p6440.h
index 528585d..bf85ebb 100644
--- a/arch/arm/plat-s5p/include/plat/s5p6440.h
+++ b/arch/arm/plat-samsung/include/plat/s5p6440.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5p6440.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/s5p6450.h
rename to arch/arm/plat-samsung/include/plat/s5p6450.h
index 640a41c..da25f9a 100644
--- a/arch/arm/plat-s5p/include/plat/s5p6450.h
+++ b/arch/arm/plat-samsung/include/plat/s5p6450.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5p6450.h
+/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/s5pc100.h
rename to arch/arm/plat-samsung/include/plat/s5pc100.h
index 5f6099d..9a21aea 100644
--- a/arch/arm/plat-s5p/include/plat/s5pc100.h
+++ b/arch/arm/plat-samsung/include/plat/s5pc100.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s5p/include/plat/s5pc100.h
+/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/s5pv210.h
rename to arch/arm/plat-samsung/include/plat/s5pv210.h
index 6c93a0c..b4bc6be7 100644
--- a/arch/arm/plat-s5p/include/plat/s5pv210.h
+++ b/arch/arm/plat-samsung/include/plat/s5pv210.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 4a65520..e7b3c75 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -55,10 +55,6 @@
  *		 cd_type == S3C_SDHCI_CD_GPIO
  * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependent on
- *	      the card and speed of operation.
  *
  * Initialisation data specific to either the machine or the platform
  * for the device driver to use or call-back when configuring gpio or
@@ -80,10 +76,6 @@
 						      int state));
 
 	void	(*cfg_gpio)(struct platform_device *dev, int width);
-	void	(*cfg_card)(struct platform_device *dev,
-			    void __iomem *regbase,
-			    struct mmc_ios *ios,
-			    struct mmc_card *card);
 };
 
 /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
@@ -139,17 +131,11 @@
 #ifdef CONFIG_S3C2416_SETUP_SDHCI
 extern char *s3c2416_hsmmc_clksrcs[4];
 
-extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s3c2416_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC */
 }
 
@@ -158,7 +144,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 }
 
@@ -172,17 +157,11 @@
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6400_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -191,7 +170,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -200,21 +178,14 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
-extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6410_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -223,7 +194,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -232,7 +202,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -251,17 +220,11 @@
 #ifdef CONFIG_S5PC100_SETUP_SDHCI
 extern char *s5pc100_hsmmc_clksrcs[4];
 
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pc100_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -270,7 +233,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -279,7 +241,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -295,17 +256,11 @@
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
-extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pv210_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -314,7 +269,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -323,7 +277,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -332,7 +285,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -348,17 +300,11 @@
 #ifdef CONFIG_EXYNOS4_SETUP_SDHCI
 extern char *exynos4_hsmmc_clksrcs[4];
 
-extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void exynos4_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -367,7 +313,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -376,7 +321,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -385,7 +329,6 @@
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h
similarity index 95%
rename from arch/arm/plat-s5p/include/plat/sysmmu.h
rename to arch/arm/plat-samsung/include/plat/sysmmu.h
index bf5283c..5fe8ee0 100644
--- a/arch/arm/plat-s5p/include/plat/sysmmu.h
+++ b/arch/arm/plat-samsung/include/plat/sysmmu.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
+/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
+#ifndef __PLAT_SAMSUNG_SYSMMU_H
+#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
 
 enum S5P_SYSMMU_INTERRUPT_TYPE {
 	SYSMMU_PAGEFAULT,
diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h
similarity index 91%
rename from arch/arm/plat-s5p/include/plat/system-reset.h
rename to arch/arm/plat-samsung/include/plat/system-reset.h
index f307f34..a448e990 100644
--- a/arch/arm/plat-s5p/include/plat/system-reset.h
+++ b/arch/arm/plat-samsung/include/plat/system-reset.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
+/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
new file mode 100644
index 0000000..3bc34f3c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/tv-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *	Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/udc.h
rename to arch/arm/plat-samsung/include/plat/udc.h
index f6388424..8c22d58 100644
--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
+++ b/arch/arm/plat-samsung/include/plat/udc.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/udc.h
+/* arch/arm/plat-samsung/include/plat/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
@@ -26,7 +26,7 @@
 
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
- 	void	(*vbus_draw)(unsigned int ma);
+	void	(*vbus_draw)(unsigned int ma);
 
 	unsigned int pullup_pin;
 	unsigned int pullup_pin_inverted;
diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
similarity index 83%
rename from arch/arm/plat-s5p/include/plat/usb-phy.h
rename to arch/arm/plat-samsung/include/plat/usb-phy.h
index 6dd6bcf..959bcdb 100644
--- a/arch/arm/plat-s5p/include/plat/usb-phy.h
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -8,8 +8,8 @@
  * option) any later version.
  */
 
-#ifndef __PLAT_S5P_USB_PHY_H
-#define __PLAT_S5P_USB_PHY_H
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
 
 enum s5p_usb_phy_type {
 	S5P_USB_PHY_DEVICE,
@@ -19,4 +19,4 @@
 extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
 extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
 
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c
index efe1d56..312b510 100644
--- a/arch/arm/plat-samsung/pd.c
+++ b/arch/arm/plat-samsung/pd.c
@@ -11,7 +11,7 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 6de1a38..ceb9fa3 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -10,6 +10,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
 
@@ -50,8 +51,6 @@
 		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
 	if (pd->host_caps)
 		set->host_caps |= pd->host_caps;
 	if (pd->clk_type)
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 9652820..4be016e 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -28,13 +28,13 @@
 #define OFFS_DAT	(0x04)
 #define OFFS_UP		(0x08)
 
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
 }
 
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -60,12 +60,12 @@
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+	.save	= samsung_gpio_pm_1bit_save,
+	.resume = samsung_gpio_pm_1bit_resume,
 };
 
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
@@ -95,7 +95,7 @@
 }
 
 /**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
  * @chip: The chip information to resume.
  *
  * Restore one of the GPIO banks that was saved during suspend. This is
@@ -121,7 +121,7 @@
  * [1] this assumes that writing to a pin DAT whilst in SFN will set the
  *     state for when it is next output.
  */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -187,13 +187,13 @@
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+	.save	= samsung_gpio_pm_2bit_save,
+	.resume = samsung_gpio_pm_2bit_resume,
 };
 
 #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
@@ -203,7 +203,7 @@
 		chip->pm_save[0] = __raw_readl(chip->base - 4);
 }
 
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
 {
 	u32 old, new, mask;
 	u32 change_mask = 0x0;
@@ -242,14 +242,14 @@
 	return change_mask;
 }
 
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
 {
 	void __iomem *con = chip->base + (index * 4);
 	u32 old_gpcon = __raw_readl(con);
 	u32 gps_gpcon = chip->pm_save[index + 1];
 	u32 gpcon, mask;
 
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
 
 	gpcon = old_gpcon & ~mask;
 	gpcon |= gps_gpcon & mask;
@@ -257,7 +257,7 @@
 	__raw_writel(gpcon, con);
 }
 
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon[2];
@@ -269,10 +269,10 @@
 	old_gpcon[0] = 0;
 	old_gpcon[1] = __raw_readl(base + OFFS_CON);
 
-	s3c_gpio_pm_4bit_con(chip, 0);
+	samsung_gpio_pm_4bit_con(chip, 0);
 	if (chip->chip.ngpio > 8) {
 		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
+		samsung_gpio_pm_4bit_con(chip, -1);
 	}
 
 	/* Now change the configurations that require DAT,CON */
@@ -298,19 +298,19 @@
 			  old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+	.save	= samsung_gpio_pm_4bit_save,
+	.resume = samsung_gpio_pm_4bit_resume,
 };
 #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
  * @ourchip: The chip for suspend.
  */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->save == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -319,24 +319,24 @@
 }
 
 /**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
  *
  * For all the GPIO banks, save the state of each one ready for going
  * into a suspend mode.
  */
-void s3c_pm_save_gpios(void)
+void samsung_pm_save_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_save_gpio(ourchip);
+		samsung_pm_save_gpio(ourchip);
 
 		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
 			  ourchip->chip.label,
@@ -351,12 +351,12 @@
 }
 
 /**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
  * @ourchip: The suspended chip.
  */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->resume == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -364,19 +364,19 @@
 		pm->resume(ourchip);
 }
 
-void s3c_pm_restore_gpios(void)
+void samsung_pm_restore_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_resume_gpio(ourchip);
+		samsung_pm_resume_gpio(ourchip);
 
 		gpio_nr += ourchip->chip.ngpio;
 		gpio_nr += CONFIG_S3C_GPIO_SPACE;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ae6f998..64ab65f 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -268,8 +268,8 @@
 
 	/* save all necessary core registers not covered by the drivers */
 
-	s3c_pm_save_gpios();
-	s3c_pm_saved_gpios();
+	samsung_pm_save_gpios();
+	samsung_pm_saved_gpios();
 	s3c_pm_save_uarts();
 	s3c_pm_save_core();
 
@@ -306,7 +306,7 @@
 
 	s3c_pm_restore_core();
 	s3c_pm_restore_uarts();
-	s3c_pm_restore_gpios();
+	samsung_pm_restore_gpios();
 	s3c_pm_restored_gpios();
 
 	s3c_pm_debug_init();
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
index f1bba88..a35ff3b 100644
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -27,7 +27,7 @@
 #include <plat/cpu.h>
 
 #include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
+#include <plat/pwm-clock.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -339,8 +339,17 @@
 	unsigned long bits;
 	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
 
+	unsigned long mux_tclk;
+
+	if (soc_is_s3c24xx())
+		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		mux_tclk = 0;
+	else
+		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
+
 	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C_TCFG1_MUX_TCLK << shift;
+		bits = mux_tclk << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
 		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index f37457c..c559d84 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -11,7 +11,7 @@
  * the Free Software Foundation; either version 2 of the License.
 */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -299,6 +299,9 @@
 		goto err_clk_tin;
 	}
 
+	clk_enable(pwm->clk);
+	clk_enable(pwm->clk_div);
+
 	local_irq_save(flags);
 
 	tcon = __raw_readl(S3C2410_TCON);
@@ -326,6 +329,8 @@
 	return 0;
 
  err_clk_tdiv:
+	clk_disable(pwm->clk_div);
+	clk_disable(pwm->clk);
 	clk_put(pwm->clk_div);
 
  err_clk_tin:
@@ -340,6 +345,8 @@
 {
 	struct pwm_device *pwm = platform_get_drvdata(pdev);
 
+	clk_disable(pwm->clk_div);
+	clk_disable(pwm->clk);
 	clk_put(pwm->clk_div);
 	clk_put(pwm->clk);
 	kfree(pwm);
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
new file mode 100644
index 0000000..7814949
--- /dev/null
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung S3C-DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/export.h>
+
+#include <mach/dma.h>
+
+struct cb_data {
+	void (*fp) (void *);
+	void *fp_param;
+	unsigned ch;
+	struct list_head node;
+};
+
+static LIST_HEAD(dma_list);
+
+static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
+		       int size, enum s3c2410_dma_buffresult res)
+{
+	struct cb_data *data = param;
+
+	data->fp(data->fp_param);
+}
+
+static unsigned s3c_dma_request(enum dma_ch dma_ch,
+				 struct samsung_dma_info *info)
+{
+	struct cb_data *data;
+
+	if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
+		s3c2410_dma_free(dma_ch, info->client);
+		return 0;
+	}
+
+	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
+	data->ch = dma_ch;
+	list_add_tail(&data->node, &dma_list);
+
+	s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
+
+	if (info->cap == DMA_CYCLIC)
+		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
+	s3c2410_dma_config(dma_ch, info->width);
+
+	return (unsigned)dma_ch;
+}
+
+static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
+{
+	struct cb_data *data;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+	list_del(&data->node);
+
+	s3c2410_dma_free(ch, client);
+	kfree(data);
+
+	return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
+{
+	struct cb_data *data;
+	int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+
+	if (!data->fp) {
+		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
+		data->fp = info->fp;
+		data->fp_param = info->fp_param;
+	}
+
+	s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
+
+	return 0;
+}
+
+static inline int s3c_dma_trigger(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
+}
+
+static inline int s3c_dma_started(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
+}
+
+static inline int s3c_dma_flush(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
+}
+
+static inline int s3c_dma_stop(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
+}
+
+static struct samsung_dma_ops s3c_dma_ops = {
+	.request	= s3c_dma_request,
+	.release	= s3c_dma_release,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.started	= s3c_dma_started,
+	.flush		= s3c_dma_flush,
+	.stop		= s3c_dma_stop,
+};
+
+void *s3c_dma_get_ops(void)
+{
+	return &s3c_dma_ops;
+}
+EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
deleted file mode 100644
index f85638c..0000000
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-pl330.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/hardware/pl330.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-/**
- * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
- * @busy_chan: Number of channels currently busy.
- * @peri: List of IDs of peripherals this DMAC can work with.
- * @node: To attach to the global list of DMACs.
- * @pi: PL330 configuration info for the DMAC.
- * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
- * @clk: Pointer of DMAC operation clock.
- */
-struct s3c_pl330_dmac {
-	unsigned		busy_chan;
-	enum dma_ch		*peri;
-	struct list_head	node;
-	struct pl330_info	*pi;
-	struct kmem_cache	*kmcache;
-	struct clk		*clk;
-};
-
-/**
- * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
- * @token: Xfer ID provided by the client.
- * @node: To attach to the list of xfers on a channel.
- * @px: Xfer for PL330 core.
- * @chan: Owner channel of this xfer.
- */
-struct s3c_pl330_xfer {
-	void			*token;
-	struct list_head	node;
-	struct pl330_xfer	px;
-	struct s3c_pl330_chan	*chan;
-};
-
-/**
- * struct s3c_pl330_chan - Logical channel to communicate with
- * 	a Physical peripheral.
- * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
- * 	NULL if the channel is available to be acquired.
- * @id: ID of the peripheral that this channel can communicate with.
- * @options: Options specified by the client.
- * @sdaddr: Address provided via s3c2410_dma_devconfig.
- * @node: To attach to the global list of channels.
- * @lrq: Pointer to the last submitted pl330_req to PL330 core.
- * @xfer_list: To manage list of xfers enqueued.
- * @req: Two requests to communicate with the PL330 engine.
- * @callback_fn: Callback function to the client.
- * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next executed.
- * @dmac: Pointer to the DMAC that manages this channel, NULL if the
- * 	channel is available to be acquired.
- * @client: Client of this channel. NULL if the
- * 	channel is available to be acquired.
- */
-struct s3c_pl330_chan {
-	void				*pl330_chan_id;
-	enum dma_ch			id;
-	unsigned int			options;
-	unsigned long			sdaddr;
-	struct list_head		node;
-	struct pl330_req		*lrq;
-	struct list_head		xfer_list;
-	struct pl330_req		req[2];
-	s3c2410_dma_cbfn_t		callback_fn;
-	struct pl330_reqcfg		rqcfg;
-	struct s3c_pl330_xfer		*xfer_head;
-	struct s3c_pl330_dmac		*dmac;
-	struct s3c2410_dma_client	*client;
-};
-
-/* All DMACs in the platform */
-static LIST_HEAD(dmac_list);
-
-/* All channels to peripherals in the platform */
-static LIST_HEAD(chan_list);
-
-/*
- * Since we add resources(DMACs and Channels) to the global pool,
- * we need to guard access to the resources using a global lock
- */
-static DEFINE_SPINLOCK(res_lock);
-
-/* Returns the channel with ID 'id' in the chan_list */
-static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch;
-
-	list_for_each_entry(ch, &chan_list, node)
-		if (ch->id == id)
-			return ch;
-
-	return NULL;
-}
-
-/* Allocate a new channel with ID 'id' and add to chan_list */
-static void chan_add(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-
-	/* Return if the channel already exists */
-	if (ch)
-		return;
-
-	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
-	/* Return silently to work with other channels */
-	if (!ch)
-		return;
-
-	ch->id = id;
-	ch->dmac = NULL;
-
-	list_add_tail(&ch->node, &chan_list);
-}
-
-/* If the channel is not yet acquired by any client */
-static bool chan_free(struct s3c_pl330_chan *ch)
-{
-	if (!ch)
-		return false;
-
-	/* Channel points to some DMAC only when it's acquired */
-	return ch->dmac ? false : true;
-}
-
-/*
- * Returns 0 is peripheral i/f is invalid or not present on the dmac.
- * Index + 1, otherwise.
- */
-static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
-{
-	enum dma_ch *id = dmac->peri;
-	int i;
-
-	/* Discount invalid markers */
-	if (ch_id == DMACH_MAX)
-		return 0;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch_id)
-			return i + 1;
-
-	return 0;
-}
-
-/* If all channel threads of the DMAC are busy */
-static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
-{
-	struct pl330_info *pi = dmac->pi;
-
-	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
-}
-
-/*
- * Returns the number of free channels that
- * can be handled by this dmac only.
- */
-static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
-{
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	struct s3c_pl330_chan *ch;
-	unsigned found, count = 0;
-	enum dma_ch p;
-	int i;
-
-	for (i = 0; i < PL330_MAX_PERI; i++) {
-		p = id[i];
-		ch = id_to_chan(p);
-
-		if (p == DMACH_MAX || !chan_free(ch))
-			continue;
-
-		found = 0;
-		list_for_each_entry(d, &dmac_list, node) {
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			count++;
-	}
-
-	return count;
-}
-
-/*
- * Measure of suitability of 'dmac' handling 'ch'
- *
- * 0 indicates 'dmac' can not handle 'ch' either
- * because it is not supported by the hardware or
- * because all dmac channels are currently busy.
- *
- * >0 vlaue indicates 'dmac' has the capability.
- * The bigger the value the more suitable the dmac.
- */
-#define MAX_SUIT	UINT_MAX
-#define MIN_SUIT	0
-
-static unsigned suitablility(struct s3c_pl330_dmac *dmac,
-		struct s3c_pl330_chan *ch)
-{
-	struct pl330_info *pi = dmac->pi;
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	unsigned s;
-	int i;
-
-	s = MIN_SUIT;
-	/* If all the DMAC channel threads are busy */
-	if (dmac_busy(dmac))
-		return s;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch->id)
-			break;
-
-	/* If the 'dmac' can't talk to 'ch' */
-	if (i == PL330_MAX_PERI)
-		return s;
-
-	s = MAX_SUIT;
-	list_for_each_entry(d, &dmac_list, node) {
-		/*
-		 * If some other dmac can talk to this
-		 * peri and has some channel free.
-		 */
-		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
-			s = 0;
-			break;
-		}
-	}
-	if (s)
-		return s;
-
-	s = 100;
-
-	/* Good if free chans are more, bad otherwise */
-	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
-
-	return s;
-}
-
-/* More than one DMAC may have capability to transfer data with the
- * peripheral. This function assigns most suitable DMAC to manage the
- * channel and hence communicate with the peripheral.
- */
-static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *d, *dmac = NULL;
-	unsigned sn, sl = MIN_SUIT;
-
-	list_for_each_entry(d, &dmac_list, node) {
-		sn = suitablility(d, ch);
-
-		if (sn == MAX_SUIT)
-			return d;
-
-		if (sn > sl)
-			dmac = d;
-	}
-
-	return dmac;
-}
-
-/* Acquire the channel for peripheral 'id' */
-static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct s3c_pl330_dmac *dmac;
-
-	/* If the channel doesn't exist or is already acquired */
-	if (!ch || !chan_free(ch)) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac = map_chan_to_dmac(ch);
-	/* If couldn't map */
-	if (!dmac) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac->busy_chan++;
-	ch->dmac = dmac;
-
-acq_exit:
-	return ch;
-}
-
-/* Delete xfer from the queue */
-static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
-{
-	struct s3c_pl330_xfer *t;
-	struct s3c_pl330_chan *ch;
-	int found;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Make sure xfer is in the queue */
-	found = 0;
-	list_for_each_entry(t, &ch->xfer_list, node)
-		if (t == xfer) {
-			found = 1;
-			break;
-		}
-
-	if (!found)
-		return;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		t = list_entry(ch->xfer_list.next,
-				struct s3c_pl330_xfer, node);
-	else
-		t = list_entry(xfer->node.next,
-				struct s3c_pl330_xfer, node);
-
-	/* If there was only one node left */
-	if (t == xfer)
-		ch->xfer_head = NULL;
-	else if (ch->xfer_head == xfer)
-		ch->xfer_head = t;
-
-	list_del(&xfer->node);
-}
-
-/* Provides pointer to the next xfer in the queue.
- * If CIRCULAR option is set, the list is left intact,
- * otherwise the xfer is removed from the list.
- * Forced delete 'pluck' can be set to override the CIRCULAR option.
- */
-static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
-		int pluck)
-{
-	struct s3c_pl330_xfer *xfer = ch->xfer_head;
-
-	if (!xfer)
-		return NULL;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		ch->xfer_head = list_entry(ch->xfer_list.next,
-					struct s3c_pl330_xfer, node);
-	else
-		ch->xfer_head = list_entry(xfer->node.next,
-					struct s3c_pl330_xfer, node);
-
-	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		del_from_queue(xfer);
-
-	return xfer;
-}
-
-static inline void add_to_queue(struct s3c_pl330_chan *ch,
-		struct s3c_pl330_xfer *xfer, int front)
-{
-	struct pl330_xfer *xt;
-
-	/* If queue empty */
-	if (ch->xfer_head == NULL)
-		ch->xfer_head = xfer;
-
-	xt = &ch->xfer_head->px;
-	/* If the head already submitted (CIRCULAR head) */
-	if (ch->options & S3C2410_DMAF_CIRCULAR &&
-		(xt == ch->req[0].x || xt == ch->req[1].x))
-		ch->xfer_head = xfer;
-
-	/* If this is a resubmission, it should go at the head */
-	if (front) {
-		ch->xfer_head = xfer;
-		list_add(&xfer->node, &ch->xfer_list);
-	} else {
-		list_add_tail(&xfer->node, &ch->xfer_list);
-	}
-}
-
-static inline void _finish_off(struct s3c_pl330_xfer *xfer,
-		enum s3c2410_dma_buffresult res, int ffree)
-{
-	struct s3c_pl330_chan *ch;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Do callback */
-	if (ch->callback_fn)
-		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
-
-	/* Force Free or if buffer is not needed anymore */
-	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		kmem_cache_free(ch->dmac->kmcache, xfer);
-}
-
-static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
-		struct pl330_req *r)
-{
-	struct s3c_pl330_xfer *xfer;
-	int ret = 0;
-
-	/* If already submitted */
-	if (r->x)
-		return 0;
-
-	xfer = get_from_queue(ch, 0);
-	if (xfer) {
-		r->x = &xfer->px;
-
-		/* Use max bandwidth for M<->M xfers */
-		if (r->rqtype == MEMTOMEM) {
-			struct pl330_info *pi = xfer->chan->dmac->pi;
-			int burst = 1 << ch->rqcfg.brst_size;
-			u32 bytes = r->x->bytes;
-			int bl;
-
-			bl = pi->pcfg.data_bus_width / 8;
-			bl *= pi->pcfg.data_buf_dep;
-			bl /= burst;
-
-			/* src/dst_burst_len can't be more than 16 */
-			if (bl > 16)
-				bl = 16;
-
-			while (bl > 1) {
-				if (!(bytes % (bl * burst)))
-					break;
-				bl--;
-			}
-
-			ch->rqcfg.brst_len = bl;
-		} else {
-			ch->rqcfg.brst_len = 1;
-		}
-
-		ret = pl330_submit_req(ch->pl330_chan_id, r);
-
-		/* If submission was successful */
-		if (!ret) {
-			ch->lrq = r; /* latest submitted req */
-			return 0;
-		}
-
-		r->x = NULL;
-
-		/* If both of the PL330 ping-pong buffers filled */
-		if (ret == -EAGAIN) {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			/* Queue back again */
-			add_to_queue(ch, xfer, 1);
-			ret = 0;
-		} else {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			_finish_off(xfer, S3C2410_RES_ERR, 0);
-		}
-	}
-
-	return ret;
-}
-
-static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
-	struct pl330_req *r, enum pl330_op_err err)
-{
-	unsigned long flags;
-	struct s3c_pl330_xfer *xfer;
-	struct pl330_xfer *xl = r->x;
-	enum s3c2410_dma_buffresult res;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	r->x = NULL;
-
-	s3c_pl330_submit(ch, r);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	/* Map result to S3C DMA API */
-	if (err == PL330_ERR_NONE)
-		res = S3C2410_RES_OK;
-	else if (err == PL330_ERR_ABORT)
-		res = S3C2410_RES_ABORT;
-	else
-		res = S3C2410_RES_ERR;
-
-	/* If last request had some xfer */
-	if (xl) {
-		xfer = container_of(xl, struct s3c_pl330_xfer, px);
-		_finish_off(xfer, res, 0);
-	} else {
-		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
-			__func__, __LINE__);
-	}
-}
-
-static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[0]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[1]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-/* Release an acquired channel */
-static void chan_release(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *dmac;
-
-	if (chan_free(ch))
-		return;
-
-	dmac = ch->dmac;
-	ch->dmac = NULL;
-	dmac->busy_chan--;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
-{
-	struct s3c_pl330_xfer *xfer;
-	enum pl330_chan_op pl330op;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int idx, ret;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto ctrl_exit;
-	}
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		/* Make sure both reqs are enqueued */
-		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-		s3c_pl330_submit(ch, &ch->req[idx]);
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-		pl330op = PL330_OP_START;
-		break;
-
-	case S3C2410_DMAOP_STOP:
-		pl330op = PL330_OP_ABORT;
-		break;
-
-	case S3C2410_DMAOP_FLUSH:
-		pl330op = PL330_OP_FLUSH;
-		break;
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_TIMEOUT:
-	case S3C2410_DMAOP_STARTED:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-
-	default:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return -EINVAL;
-	}
-
-	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
-
-	if (pl330op == PL330_OP_START) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return ret;
-	}
-
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	/* Abort the current xfer */
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		/* Drop xfer during FLUSH */
-		if (pl330op == PL330_OP_FLUSH)
-			del_from_queue(xfer);
-
-		ch->req[idx].x = NULL;
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT,
-				pl330op == PL330_OP_FLUSH ? 1 : 0);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Flush the whole queue */
-	if (pl330op == PL330_OP_FLUSH) {
-
-		if (ch->req[1 - idx].x) {
-			xfer = container_of(ch->req[1 - idx].x,
-					struct s3c_pl330_xfer, px);
-
-			del_from_queue(xfer);
-
-			ch->req[1 - idx].x = NULL;
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-		}
-
-		/* Finish off the remaining in the queue */
-		xfer = ch->xfer_head;
-		while (xfer) {
-
-			del_from_queue(xfer);
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-
-			xfer = ch->xfer_head;
-		}
-	}
-
-ctrl_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-int s3c2410_dma_enqueue(enum dma_ch id, void *token,
-			dma_addr_t addr, int size)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int idx, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	/* Error if invalid or free channel */
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	/* Error if size is unaligned */
-	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
-	if (!xfer) {
-		ret = -ENOMEM;
-		goto enq_exit;
-	}
-
-	xfer->token = token;
-	xfer->chan = ch;
-	xfer->px.bytes = size;
-	xfer->px.next = NULL; /* Single request */
-
-	/* For S3C DMA API, direction is always fixed for all xfers */
-	if (ch->req[0].rqtype == MEMTODEV) {
-		xfer->px.src_addr = addr;
-		xfer->px.dst_addr = ch->sdaddr;
-	} else {
-		xfer->px.src_addr = ch->sdaddr;
-		xfer->px.dst_addr = addr;
-	}
-
-	add_to_queue(ch, xfer, 0);
-
-	/* Try submitting on either request */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (!ch->req[idx].x)
-		s3c_pl330_submit(ch, &ch->req[idx]);
-	else
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	if (ch->options & S3C2410_DMAF_AUTOSTART)
-		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
-
-	return 0;
-
-enq_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-int s3c2410_dma_request(enum dma_ch id,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c_pl330_dmac *dmac;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = chan_acquire(id);
-	if (!ch) {
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	dmac = ch->dmac;
-
-	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
-	if (!ch->pl330_chan_id) {
-		chan_release(ch);
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	ch->client = client;
-	ch->options = 0; /* Clear any option */
-	ch->callback_fn = NULL; /* Clear any callback */
-	ch->lrq = NULL;
-
-	ch->rqcfg.brst_size = 2; /* Default word size */
-	ch->rqcfg.swap = SWAP_NO;
-	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.privileged = 0;
-	ch->rqcfg.insnaccess = 0;
-
-	/* Set invalid direction */
-	ch->req[0].rqtype = DEVTODEV;
-	ch->req[1].rqtype = ch->req[0].rqtype;
-
-	ch->req[0].cfg = &ch->rqcfg;
-	ch->req[1].cfg = ch->req[0].cfg;
-
-	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
-	ch->req[1].peri = ch->req[0].peri;
-
-	ch->req[0].token = &ch->req[0];
-	ch->req[0].xfer_cb = s3c_pl330_rq0;
-	ch->req[1].token = &ch->req[1];
-	ch->req[1].xfer_cb = s3c_pl330_rq1;
-
-	ch->req[0].x = NULL;
-	ch->req[1].x = NULL;
-
-	/* Reset xfer list */
-	INIT_LIST_HEAD(&ch->xfer_list);
-	ch->xfer_head = NULL;
-
-req_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int ret = 0;
-	unsigned idx;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		goto free_exit;
-
-	/* Refuse if someone else wanted to free the channel */
-	if (ch->client != client) {
-		ret = -EBUSY;
-		goto free_exit;
-	}
-
-	/* Stop any active xfer, Flushe the queue and do callbacks */
-	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
-
-	/* Abort the submitted requests */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	if (ch->req[1 - idx].x) {
-		xfer = container_of(ch->req[1 - idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[1 - idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Pluck and Abort the queued requests in order */
-	do {
-		xfer = get_from_queue(ch, 1);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	} while (xfer);
-
-	ch->client = NULL;
-
-	pl330_release_channel(ch->pl330_chan_id);
-
-	ch->pl330_chan_id = NULL;
-
-	chan_release(ch);
-
-free_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-int s3c2410_dma_config(enum dma_ch id, int xferunit)
-{
-	struct s3c_pl330_chan *ch;
-	struct pl330_info *pi;
-	unsigned long flags;
-	int i, dbwidth, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	pi = ch->dmac->pi;
-	dbwidth = pi->pcfg.data_bus_width / 8;
-
-	/* Max size of xfer can be pcfg.data_bus_width */
-	if (xferunit > dbwidth) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	i = 0;
-	while (xferunit != (1 << i))
-		i++;
-
-	/* If valid value */
-	if (xferunit == (1 << i))
-		ch->rqcfg.brst_size = i;
-	else
-		ret = -EINVAL;
-
-cfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-/* Options that are supported by this driver */
-#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
-
-int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
-		ret = -EINVAL;
-	else
-		ch->options = options;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		ret = -EINVAL;
-	else
-		ch->callback_fn = rtn;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
-			  unsigned long address)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	switch (source) {
-	case S3C2410_DMASRC_HW: /* P->M */
-		ch->req[0].rqtype = DEVTOMEM;
-		ch->req[1].rqtype = DEVTOMEM;
-		ch->rqcfg.src_inc = 0;
-		ch->rqcfg.dst_inc = 1;
-		break;
-	case S3C2410_DMASRC_MEM: /* M->P */
-		ch->req[0].rqtype = MEMTODEV;
-		ch->req[1].rqtype = MEMTODEV;
-		ch->rqcfg.src_inc = 1;
-		ch->rqcfg.dst_inc = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	ch->sdaddr = address;
-
-devcfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct pl330_chanstatus status;
-	int ret;
-
-	if (!ch || chan_free(ch))
-		return -EINVAL;
-
-	ret = pl330_chan_status(ch->pl330_chan_id, &status);
-	if (ret < 0)
-		return ret;
-
-	*src = status.src_addr;
-	*dst = status.dst_addr;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-static irqreturn_t pl330_irq_handler(int irq, void *data)
-{
-	if (pl330_update(data))
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
-}
-
-static int pl330_probe(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *s3c_pl330_dmac;
-	struct s3c_pl330_platdata *pl330pd;
-	struct pl330_info *pl330_info;
-	struct resource *res;
-	int i, ret, irq;
-
-	pl330pd = pdev->dev.platform_data;
-
-	/* Can't do without the list of _32_ peripherals */
-	if (!pl330pd || !pl330pd->peri) {
-		dev_err(&pdev->dev, "platform data missing!\n");
-		return -ENODEV;
-	}
-
-	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
-	if (!pl330_info)
-		return -ENOMEM;
-
-	pl330_info->pl330_data = NULL;
-	pl330_info->dev = &pdev->dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto probe_err1;
-	}
-
-	request_mem_region(res->start, resource_size(res), pdev->name);
-
-	pl330_info->base = ioremap(res->start, resource_size(res));
-	if (!pl330_info->base) {
-		ret = -ENXIO;
-		goto probe_err2;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto probe_err3;
-	}
-
-	ret = request_irq(irq, pl330_irq_handler, 0,
-			dev_name(&pdev->dev), pl330_info);
-	if (ret)
-		goto probe_err4;
-
-	/* Allocate a new DMAC */
-	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
-	if (!s3c_pl330_dmac) {
-		ret = -ENOMEM;
-		goto probe_err5;
-	}
-
-	/* Get operation clock and enable it */
-	s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
-	if (IS_ERR(s3c_pl330_dmac->clk)) {
-		dev_err(&pdev->dev, "Cannot get operation clock.\n");
-		ret = -EINVAL;
-		goto probe_err6;
-	}
-	clk_enable(s3c_pl330_dmac->clk);
-
-	ret = pl330_add(pl330_info);
-	if (ret)
-		goto probe_err7;
-
-	/* Hook the info */
-	s3c_pl330_dmac->pi = pl330_info;
-
-	/* No busy channels */
-	s3c_pl330_dmac->busy_chan = 0;
-
-	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
-				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
-
-	if (!s3c_pl330_dmac->kmcache) {
-		ret = -ENOMEM;
-		goto probe_err8;
-	}
-
-	/* Get the list of peripherals */
-	s3c_pl330_dmac->peri = pl330pd->peri;
-
-	/* Attach to the list of DMACs */
-	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
-
-	/* Create a channel for each peripheral in the DMAC
-	 * that is, if it doesn't already exist
-	 */
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
-			chan_add(s3c_pl330_dmac->peri[i]);
-
-	printk(KERN_INFO
-		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
-	printk(KERN_INFO
-		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
-		pl330_info->pcfg.data_buf_dep,
-		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
-		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
-
-	return 0;
-
-probe_err8:
-	pl330_del(pl330_info);
-probe_err7:
-	clk_disable(s3c_pl330_dmac->clk);
-	clk_put(s3c_pl330_dmac->clk);
-probe_err6:
-	kfree(s3c_pl330_dmac);
-probe_err5:
-	free_irq(irq, pl330_info);
-probe_err4:
-probe_err3:
-	iounmap(pl330_info->base);
-probe_err2:
-	release_mem_region(res->start, resource_size(res));
-probe_err1:
-	kfree(pl330_info);
-
-	return ret;
-}
-
-static int pl330_remove(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *dmac, *d;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int del, found;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	found = 0;
-	list_for_each_entry(d, &dmac_list, node)
-		if (d->pi->dev == &pdev->dev) {
-			found = 1;
-			break;
-		}
-
-	if (!found) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-	}
-
-	dmac = d;
-
-	/* Remove all Channels that are managed only by this DMAC */
-	list_for_each_entry(ch, &chan_list, node) {
-
-		/* Only channels that are handled by this DMAC */
-		if (iface_of_dmac(dmac, ch->id))
-			del = 1;
-		else
-			continue;
-
-		/* Don't remove if some other DMAC has it too */
-		list_for_each_entry(d, &dmac_list, node)
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				del = 0;
-				break;
-			}
-
-		if (del) {
-			spin_unlock_irqrestore(&res_lock, flags);
-			s3c2410_dma_free(ch->id, ch->client);
-			spin_lock_irqsave(&res_lock, flags);
-			list_del(&ch->node);
-			kfree(ch);
-		}
-	}
-
-	/* Disable operation clock */
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-
-	/* Remove the DMAC */
-	list_del(&dmac->node);
-	kfree(dmac);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-
-static struct platform_driver pl330_driver = {
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c-pl330",
-	},
-	.probe		= pl330_probe,
-	.remove		= pl330_remove,
-};
-
-static int __init pl330_init(void)
-{
-	return platform_driver_register(&pl330_driver);
-}
-module_init(pl330_init);
-
-static void __exit pl330_exit(void)
-{
-	platform_driver_unregister(&pl330_driver);
-	return;
-}
-module_exit(pl330_exit);
-
-MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5bdeef9..ccbe16f 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -1123,5 +1123,6 @@
 thales_adc		MACH_THALES_ADC		THALES_ADC		3492
 ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
 atdgp318		MACH_ATDGP318		ATDGP318		3494
+m28evk			MACH_M28EVK		M28EVK			3613
 smdk4212		MACH_SMDK4212		SMDK4212		3638
 smdk4412		MACH_SMDK4412		SMDK4412		3765
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 0cbd5a0..8f3ccdd 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -8,7 +8,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index fafed4c..1f17bde 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@
 	},
 };
 
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(nand_partitions);
-	return nand_partitions;
-}
 
 static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
 	.cle		= 21,
@@ -102,7 +97,8 @@
 	.rdy_pin	= GPIO_PIN_PB(28),
 	.enable_pin	= GPIO_PIN_PE(23),
 	.bus_width_16	= true,
-	.partition_info	= nand_part_info,
+	.parts		= nand_partitions,
+	.num_parts	= ARRAY_SIZE(nand_partitions),
 };
 #endif
 
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 6ce30fb..4643ff5 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -90,18 +90,13 @@
 	},
 };
 
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(nand_partitions);
-	return nand_partitions;
-}
-
 static struct atmel_nand_data atstk1006_nand_data __initdata = {
 	.cle		= 21,
 	.ale		= 22,
 	.rdy_pin	= GPIO_PIN_PB(30),
 	.enable_pin	= GPIO_PIN_PB(29),
-	.partition_info	= nand_part_info,
+	.parts		= nand_partitions,
+	.num_parts	= ARRAY_SIZE(num_partitions),
 };
 #endif
 
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 86925fd..23b1a97 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -13,6 +13,7 @@
  */
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/string.h>
 #include <linux/list.h>
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 024c586..6277433 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <asm/system.h>
 
 static struct clk *cpuclk;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 679458d..5d7ffca 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -128,7 +128,8 @@
 	u8	ale;		/* address line number connected to ALE */
 	u8	cle;		/* address line number connected to CLE */
 	u8	bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+	struct mtd_partition *parts;
+	unsigned int	num_parts;
 };
 struct platform_device *
 at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 258682b..aaff83c 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
+#include <linux/export.h>
 
 #include <asm/io.h>
 
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 9b39dea..903c7d8 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -10,6 +10,7 @@
 
 #include <linux/clk.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
index 3c00422..50cdb5b 100644
--- a/arch/avr32/mm/dma-coherent.c
+++ b/arch/avr32/mm/dma-coherent.c
@@ -8,6 +8,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/gfp.h>
+#include <linux/export.h>
 
 #include <asm/addrspace.h>
 #include <asm/cacheflush.h>
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 7fd0ec7..ecacdf3 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -32,6 +32,8 @@
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	int tx_irq;
+	int rx_irq;
 	int status_irq;
 #ifndef BFIN_UART_BF54X_STYLE
 	unsigned int lsr;
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index 04ddcfe..f0d1118 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -12,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
+#include <linux/export.h>
 
 static spinlock_t dma_page_lock;
 static unsigned long *dma_page;
diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c
index 04300f2..e47d19a 100644
--- a/arch/blackfin/kernel/perf_event.c
+++ b/arch/blackfin/kernel/perf_event.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/perf_event.h>
 #include <asm/bfin_pfmon.h>
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index 89448ed..d998383 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -41,6 +41,7 @@
 
 #if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
 #include <linux/fb.h>
+#include <linux/export.h>
 unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
 	unsigned long len, unsigned long pgoff, unsigned long flags)
 {
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d78fc2c..d1c0c0c 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -372,8 +373,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -415,8 +421,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index 55c1279..5470bf8 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -309,8 +309,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -352,8 +357,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index c04df43..5bc6938 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -380,8 +381,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -423,8 +429,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 6400341..cd28969 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -539,8 +540,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -582,8 +588,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 6dbb1b4..9f792ea 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -417,8 +418,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -460,8 +466,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 4e9dc9c..3ecafff 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -710,8 +711,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -753,8 +759,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index ec4bc74..3a92c43 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -495,8 +496,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -539,8 +545,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 5da5787..47cadd3 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -238,8 +238,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index b0ec825..18817d5 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -193,8 +193,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 14f54a3..2c8f30e 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -221,8 +221,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index ecd2801..144556e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -292,8 +292,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index fbee77f..b597d4e 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -151,8 +151,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 964a8e5..2afd02e 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -298,8 +298,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 9fb20d6..604a430 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -305,8 +306,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -366,8 +372,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 5ba389f..d916b46 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -306,8 +307,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -349,8 +355,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c
index 8bc951d..5f30722 100644
--- a/arch/blackfin/mach-bf537/boards/dnp5370.c
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -236,8 +237,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -280,8 +286,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end   = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end   = IRQ_UART1_RX+1,
+		.end   = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index c62f9dc..3901dd0 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -240,8 +240,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -283,8 +288,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 3b8151d..aebd31c 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -8,6 +8,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -100,6 +101,7 @@
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
+#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
@@ -308,8 +310,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -351,8 +358,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 6c916a6..7fbb0bb 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -1566,8 +1567,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -1621,8 +1627,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 2da0316..6917ce2 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -306,8 +307,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -349,8 +355,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 629f3c3..8356eb5 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -49,8 +49,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -104,8 +109,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -147,8 +157,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 212b9e0..0350eac 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -135,8 +135,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -178,8 +183,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -237,8 +247,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -280,8 +295,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index cd9cbb6..bb868ac 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -241,8 +241,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -284,8 +289,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -343,8 +353,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -386,8 +401,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 972e134..b1b7339 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -203,8 +203,13 @@
 	 .flags = IORESOURCE_MEM,
 	 },
 	{
+	 .start = IRQ_UART_TX,
+	 .end = IRQ_UART_TX,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
 	 .start = IRQ_UART_RX,
-	 .end = IRQ_UART_RX + 1,
+	 .end = IRQ_UART_RX,
 	 .flags = IORESOURCE_IRQ,
 	 },
 	{
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c1b72f2..c017cf0 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -277,8 +277,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9490dc8..27f22ed 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -172,8 +172,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index bb056e6..1a57bc9 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -51,8 +51,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 85dc6d6..2e6eefd 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index f8435cd..78daae0 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -8,6 +8,7 @@
 #include <linux/swap.h>
 #include <linux/bootmem.h>
 #include <linux/uaccess.h>
+#include <linux/export.h>
 #include <asm/bfin-global.h>
 #include <asm/pda.h>
 #include <asm/cplbinit.h>
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 32d9086..5f2cdb3 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -3,7 +3,7 @@
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index e47e9c3..de43aad 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -3,7 +3,7 @@
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index f58f2c1..7fb5212 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -163,7 +163,7 @@
 	this->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	/* this->options = NAND_USE_FLASH_BBT; */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
 
 	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index d5b0cc9..e032384 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -154,7 +154,7 @@
 	this->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	/* this->options = NAND_USE_FLASH_BBT; */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
 
 	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index e4a80d8..1e4cae5 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/swiotlb.h>
+#include <linux/export.h>
 #include <asm/machvec.h>
 
 extern struct dma_map_ops sba_dma_ops, swiotlb_dma_ops;
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 7c928da..7617248 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -321,11 +321,13 @@
 #define __NR_syncfs			1329
 #define __NR_setns			1330
 #define __NR_sendmmsg			1331
+#define __NR_process_vm_readv		1332
+#define __NR_process_vm_writev		1333
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			308 /* length of syscall table */
+#define NR_syscalls			310 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/asm/xen/grant_table.h b/arch/ia64/include/asm/xen/grant_table.h
deleted file mode 100644
index 2b1fae0..0000000
--- a/arch/ia64/include/asm/xen/grant_table.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/******************************************************************************
- * arch/ia64/include/asm/xen/grant_table.h
- *
- * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
- *                    VA Linux Systems Japan K.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef _ASM_IA64_XEN_GRANT_TABLE_H
-#define _ASM_IA64_XEN_GRANT_TABLE_H
-
-struct vm_struct *xen_alloc_vm_area(unsigned long size);
-void xen_free_vm_area(struct vm_struct *area);
-
-#endif /* _ASM_IA64_XEN_GRANT_TABLE_H */
diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h
index e951e74..1d2427d 100644
--- a/arch/ia64/include/asm/xen/interface.h
+++ b/arch/ia64/include/asm/xen/interface.h
@@ -76,6 +76,7 @@
 DEFINE_GUEST_HANDLE(int);
 DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
 
 typedef unsigned long xen_pfn_t;
 DEFINE_GUEST_HANDLE(xen_pfn_t);
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index f2c1600..7f79162 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -1,4 +1,5 @@
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly;
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 198c753..5b31d46 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1777,6 +1777,8 @@
 	data8 sys_syncfs
 	data8 sys_setns				// 1330
 	data8 sys_sendmmsg
+	data8 sys_process_vm_readv
+	data8 sys_process_vm_writev
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 0e0e0cc..9be1f11 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -22,6 +22,7 @@
 #include <linux/bootmem.h>
 #include <linux/nodemask.h>
 #include <linux/notifier.h>
+#include <linux/export.h>
 #include <asm/mmzone.h>
 #include <asm/numa.h>
 #include <asm/cpu.h>
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index aa2533a..2c27714 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 
 #include <asm/machvec.h>
 #include <asm/page.h>
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 8cdcb17..b172539 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -14,6 +14,7 @@
 #include "xtalk/hubdev.h"
 #include <linux/acpi.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 
 /*
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 98079f2..0a36f08 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/sn/types.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/io.h>
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index 33def66..1e863b2 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/geo.h>
 #include <asm/sn/pcibr_provider.h>
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index 3cb5cf3..5698f29 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/geo.h>
 #include <asm/sn/pcibr_provider.h>
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 9c271be..642451e 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <linux/bitmap.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/io.h>
diff --git a/arch/ia64/xen/grant-table.c b/arch/ia64/xen/grant-table.c
index 48cca37..c182813 100644
--- a/arch/ia64/xen/grant-table.c
+++ b/arch/ia64/xen/grant-table.c
@@ -31,68 +31,6 @@
 
 #include <asm/xen/hypervisor.h>
 
-struct vm_struct *xen_alloc_vm_area(unsigned long size)
-{
-	int order;
-	unsigned long virt;
-	unsigned long nr_pages;
-	struct vm_struct *area;
-
-	order = get_order(size);
-	virt = __get_free_pages(GFP_KERNEL, order);
-	if (virt == 0)
-		goto err0;
-	nr_pages = 1 << order;
-	scrub_pages(virt, nr_pages);
-
-	area = kmalloc(sizeof(*area), GFP_KERNEL);
-	if (area == NULL)
-		goto err1;
-
-	area->flags = VM_IOREMAP;
-	area->addr = (void *)virt;
-	area->size = size;
-	area->pages = NULL;
-	area->nr_pages = nr_pages;
-	area->phys_addr = 0;	/* xenbus_map_ring_valloc uses this field!  */
-
-	return area;
-
-err1:
-	free_pages(virt, order);
-err0:
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(xen_alloc_vm_area);
-
-void xen_free_vm_area(struct vm_struct *area)
-{
-	unsigned int order = get_order(area->size);
-	unsigned long i;
-	unsigned long phys_addr = __pa(area->addr);
-
-	/* This area is used for foreign page mappping.
-	 * So underlying machine page may not be assigned. */
-	for (i = 0; i < (1 << order); i++) {
-		unsigned long ret;
-		unsigned long gpfn = (phys_addr >> PAGE_SHIFT) + i;
-		struct xen_memory_reservation reservation = {
-			.nr_extents   = 1,
-			.address_bits = 0,
-			.extent_order = 0,
-			.domid        = DOMID_SELF
-		};
-		set_xen_guest_handle(reservation.extent_start, &gpfn);
-		ret = HYPERVISOR_memory_op(XENMEM_populate_physmap,
-					   &reservation);
-		BUG_ON(ret != 1);
-	}
-	free_pages((unsigned long)area->addr, order);
-	kfree(area);
-}
-EXPORT_SYMBOL_GPL(xen_free_vm_area);
-
-
 /****************************************************************************
  * grant table hack
  * cmd: GNTTABOP_xxx
diff --git a/arch/ia64/xen/hypervisor.c b/arch/ia64/xen/hypervisor.c
index cac4d97..52172ee 100644
--- a/arch/ia64/xen/hypervisor.c
+++ b/arch/ia64/xen/hypervisor.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/efi.h>
+#include <linux/export.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/privop.h>
 
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 6c4e9aa..ef80a65 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -323,13 +323,6 @@
 	default "1"
 	depends on NEED_MULTIPLE_NODES
 
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
-	bool
-	depends on NUMA
-	default n
-
 endmenu
 
 
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6c28582..361d540 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,8 +4,8 @@
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
-	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_IRQ_SHOW if !MMU
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 
 config RWSEM_GENERIC_SPINLOCK
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 8294f0c..3adb499 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -2,6 +2,15 @@
 
 comment "Bus Support"
 
+config DIO
+	bool "DIO bus support"
+	depends on HP300
+	default y
+	help
+	  Say Y here to enable support for the "DIO" expansion bus used in
+	  HP300 machines. If you are using such a system you almost certainly
+	  want this.
+
 config NUBUS
 	bool
 	depends on MAC
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d214034..6033f5d 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -24,6 +24,37 @@
 	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 	  and memory size.
 
+config NATFEAT
+	bool "ARAnyM emulator support"
+	depends on ATARI
+	help
+	  This option enables support for ARAnyM native features, such as
+	  access to a disk image as /dev/hda.
+
+config NFBLOCK
+	tristate "NatFeat block device support"
+	depends on BLOCK && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat block device
+	  which allows direct access to the hard drives without using
+	  the hardware emulation.
+
+config NFCON
+	tristate "NatFeat console driver"
+	depends on NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
+config NFETH
+	tristate "NatFeat Ethernet support"
+	depends on ETHERNET && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat network device
+	  which will emulate a regular ethernet device while presenting an
+	  ethertap device to the host system.
+
 endmenu
 
 menu "Character devices"
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index c5b5212..47b5f90 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -1,43 +1,15 @@
 /*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with IRQF_DISABLED and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
  */
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 
 #include <asm/irq.h>
 #include <asm/traps.h>
@@ -45,20 +17,128 @@
 #include <asm/amigaints.h>
 #include <asm/amipcmcia.h>
 
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
 
-static struct irq_controller amiga_irq_controller = {
+/*
+ * Enable/disable a particular machine specific interrupt source.
+ * Note that this may affect other interrupts in case of a shared interrupt.
+ * This function should only be called for a _very_ short time to change some
+ * internal data, that may not be changed by the interrupt at the same time.
+ */
+
+static void amiga_irq_enable(struct irq_data *data)
+{
+	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
+}
+
+static void amiga_irq_disable(struct irq_data *data)
+{
+	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
+}
+
+static struct irq_chip amiga_irq_chip = {
 	.name		= "amiga",
-	.lock		= __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
-	.enable		= amiga_enable_irq,
-	.disable	= amiga_disable_irq,
+	.irq_enable	= amiga_irq_enable,
+	.irq_disable	= amiga_irq_disable,
 };
 
+
+/*
+ * The builtin Amiga hardware interrupt handlers.
+ */
+
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if serial transmit buffer empty, interrupt */
+	if (ints & IF_TBE) {
+		amiga_custom.intreq = IF_TBE;
+		generic_handle_irq(IRQ_AMIGA_TBE);
+	}
+
+	/* if floppy disk transfer complete, interrupt */
+	if (ints & IF_DSKBLK) {
+		amiga_custom.intreq = IF_DSKBLK;
+		generic_handle_irq(IRQ_AMIGA_DSKBLK);
+	}
+
+	/* if software interrupt set, interrupt */
+	if (ints & IF_SOFT) {
+		amiga_custom.intreq = IF_SOFT;
+		generic_handle_irq(IRQ_AMIGA_SOFT);
+	}
+}
+
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if a blitter interrupt */
+	if (ints & IF_BLIT) {
+		amiga_custom.intreq = IF_BLIT;
+		generic_handle_irq(IRQ_AMIGA_BLIT);
+	}
+
+	/* if a copper interrupt */
+	if (ints & IF_COPER) {
+		amiga_custom.intreq = IF_COPER;
+		generic_handle_irq(IRQ_AMIGA_COPPER);
+	}
+
+	/* if a vertical blank interrupt */
+	if (ints & IF_VERTB) {
+		amiga_custom.intreq = IF_VERTB;
+		generic_handle_irq(IRQ_AMIGA_VERTB);
+	}
+}
+
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if audio 0 interrupt */
+	if (ints & IF_AUD0) {
+		amiga_custom.intreq = IF_AUD0;
+		generic_handle_irq(IRQ_AMIGA_AUD0);
+	}
+
+	/* if audio 1 interrupt */
+	if (ints & IF_AUD1) {
+		amiga_custom.intreq = IF_AUD1;
+		generic_handle_irq(IRQ_AMIGA_AUD1);
+	}
+
+	/* if audio 2 interrupt */
+	if (ints & IF_AUD2) {
+		amiga_custom.intreq = IF_AUD2;
+		generic_handle_irq(IRQ_AMIGA_AUD2);
+	}
+
+	/* if audio 3 interrupt */
+	if (ints & IF_AUD3) {
+		amiga_custom.intreq = IF_AUD3;
+		generic_handle_irq(IRQ_AMIGA_AUD3);
+	}
+}
+
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if serial receive buffer full interrupt */
+	if (ints & IF_RBF) {
+		/* acknowledge of IF_RBF must be done by the serial interrupt */
+		generic_handle_irq(IRQ_AMIGA_RBF);
+	}
+
+	/* if a disk sync interrupt */
+	if (ints & IF_DSKSYN) {
+		amiga_custom.intreq = IF_DSKSYN;
+		generic_handle_irq(IRQ_AMIGA_DSKSYN);
+	}
+}
+
+
 /*
  * void amiga_init_IRQ(void)
  *
@@ -72,16 +152,13 @@
 
 void __init amiga_init_IRQ(void)
 {
-	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
-		pr_err("Couldn't register int%d\n", 1);
-	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
-		pr_err("Couldn't register int%d\n", 3);
-	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
-		pr_err("Couldn't register int%d\n", 4);
-	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
-		pr_err("Couldn't register int%d\n", 5);
+	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+				  AMI_STD_IRQS);
 
-	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
+	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
 
 	/* turn off PCMCIA interrupts */
 	if (AMIGAHW_PRESENT(PCMCIA))
@@ -95,120 +172,3 @@
 	cia_init_IRQ(&ciaa_base);
 	cia_init_IRQ(&ciab_base);
 }
-
-/*
- * Enable/disable a particular machine specific interrupt source.
- * Note that this may affect other interrupts in case of a shared interrupt.
- * This function should only be called for a _very_ short time to change some
- * internal data, that may not be changed by the interrupt at the same time.
- */
-
-static void amiga_enable_irq(unsigned int irq)
-{
-	amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
-}
-
-static void amiga_disable_irq(unsigned int irq)
-{
-	amiga_custom.intena = 1 << (irq - IRQ_USER);
-}
-
-/*
- * The builtin Amiga hardware interrupt handlers.
- */
-
-static irqreturn_t ami_int1(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial transmit buffer empty, interrupt */
-	if (ints & IF_TBE) {
-		amiga_custom.intreq = IF_TBE;
-		m68k_handle_int(IRQ_AMIGA_TBE);
-	}
-
-	/* if floppy disk transfer complete, interrupt */
-	if (ints & IF_DSKBLK) {
-		amiga_custom.intreq = IF_DSKBLK;
-		m68k_handle_int(IRQ_AMIGA_DSKBLK);
-	}
-
-	/* if software interrupt set, interrupt */
-	if (ints & IF_SOFT) {
-		amiga_custom.intreq = IF_SOFT;
-		m68k_handle_int(IRQ_AMIGA_SOFT);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int3(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if a blitter interrupt */
-	if (ints & IF_BLIT) {
-		amiga_custom.intreq = IF_BLIT;
-		m68k_handle_int(IRQ_AMIGA_BLIT);
-	}
-
-	/* if a copper interrupt */
-	if (ints & IF_COPER) {
-		amiga_custom.intreq = IF_COPER;
-		m68k_handle_int(IRQ_AMIGA_COPPER);
-	}
-
-	/* if a vertical blank interrupt */
-	if (ints & IF_VERTB) {
-		amiga_custom.intreq = IF_VERTB;
-		m68k_handle_int(IRQ_AMIGA_VERTB);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int4(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if audio 0 interrupt */
-	if (ints & IF_AUD0) {
-		amiga_custom.intreq = IF_AUD0;
-		m68k_handle_int(IRQ_AMIGA_AUD0);
-	}
-
-	/* if audio 1 interrupt */
-	if (ints & IF_AUD1) {
-		amiga_custom.intreq = IF_AUD1;
-		m68k_handle_int(IRQ_AMIGA_AUD1);
-	}
-
-	/* if audio 2 interrupt */
-	if (ints & IF_AUD2) {
-		amiga_custom.intreq = IF_AUD2;
-		m68k_handle_int(IRQ_AMIGA_AUD2);
-	}
-
-	/* if audio 3 interrupt */
-	if (ints & IF_AUD3) {
-		amiga_custom.intreq = IF_AUD3;
-		m68k_handle_int(IRQ_AMIGA_AUD3);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int5(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial receive buffer full interrupt */
-	if (ints & IF_RBF) {
-		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		m68k_handle_int(IRQ_AMIGA_RBF);
-	}
-
-	/* if a disk sync interrupt */
-	if (ints & IF_DSKSYN) {
-		amiga_custom.intreq = IF_DSKSYN;
-		m68k_handle_int(IRQ_AMIGA_DSKSYN);
-	}
-	return IRQ_HANDLED;
-}
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index ecd0f7c..18c0e29 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -93,13 +93,14 @@
 	amiga_custom.intreq = base->int_mask;
 	for (; ints; mach_irq++, ints >>= 1) {
 		if (ints & 1)
-			m68k_handle_int(mach_irq);
+			generic_handle_irq(mach_irq);
 	}
 	return IRQ_HANDLED;
 }
 
-static void cia_enable_irq(unsigned int irq)
+static void cia_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned char mask;
 
 	if (irq >= IRQ_AMIGA_CIAB) {
@@ -113,19 +114,20 @@
 	}
 }
 
-static void cia_disable_irq(unsigned int irq)
+static void cia_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= IRQ_AMIGA_CIAB)
 		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
 	else
 		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
 }
 
-static struct irq_controller cia_irq_controller = {
+static struct irq_chip cia_irq_chip = {
 	.name		= "cia",
-	.lock		= __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
-	.enable		= cia_enable_irq,
-	.disable	= cia_disable_irq,
+	.irq_enable	= cia_irq_enable,
+	.irq_disable	= cia_irq_disable,
 };
 
 /*
@@ -134,9 +136,9 @@
  * into this chain.
  */
 
-static void auto_enable_irq(unsigned int irq)
+static void auto_irq_enable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_SETCLR | IF_PORTS;
 		break;
@@ -146,9 +148,9 @@
 	}
 }
 
-static void auto_disable_irq(unsigned int irq)
+static void auto_irq_disable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_PORTS;
 		break;
@@ -158,24 +160,25 @@
 	}
 }
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.enable		= auto_enable_irq,
-	.disable	= auto_disable_irq,
+	.irq_enable	= auto_irq_enable,
+	.irq_disable	= auto_irq_disable,
 };
 
 void __init cia_init_IRQ(struct ciabase *base)
 {
-	m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS);
+	m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+				  base->cia_irq, CIA_IRQS);
 
 	/* clear any pending interrupt and turn off all interrupts */
 	cia_set_irq(base, CIA_ICR_ALL);
 	cia_able_irq(base, CIA_ICR_ALL);
 
 	/* override auto int and install CIA handler */
-	m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
-	m68k_irq_startup(base->handler_irq);
+	m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+				  base->handler_irq, 1);
+	m68k_irq_startup_irq(base->handler_irq);
 	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
 			base->name, base))
 		pr_err("Couldn't register %s interrupt\n", base->name);
diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c
index 5d47f3a..17be1e7 100644
--- a/arch/m68k/apollo/dn_ints.c
+++ b/arch/m68k/apollo/dn_ints.c
@@ -1,19 +1,13 @@
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
-#include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/apollohw.h>
 
-void dn_process_int(unsigned int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
 {
-	__m68k_handle_int(irq, fp);
+	unsigned int irq = data->irq;
 
-	*(volatile unsigned char *)(pica)=0x20;
-	*(volatile unsigned char *)(picb)=0x20;
-}
-
-int apollo_irq_startup(unsigned int irq)
-{
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
 	else
@@ -21,24 +15,33 @@
 	return 0;
 }
 
-void apollo_irq_shutdown(unsigned int irq)
+void apollo_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) |= (1 << irq);
 	else
 		*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
 }
 
-static struct irq_controller apollo_irq_controller = {
+void apollo_irq_eoi(struct irq_data *data)
+{
+	*(volatile unsigned char *)(pica) = 0x20;
+	*(volatile unsigned char *)(picb) = 0x20;
+}
+
+static struct irq_chip apollo_irq_chip = {
 	.name           = "apollo",
-	.lock           = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
-	.startup        = apollo_irq_startup,
-	.shutdown       = apollo_irq_shutdown,
+	.irq_startup    = apollo_irq_startup,
+	.irq_shutdown   = apollo_irq_shutdown,
+	.irq_eoi	= apollo_irq_eoi,
 };
 
 
 void __init dn_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
-	m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
+	m68k_setup_user_interrupt(VEC_USER + 96, 16);
+	m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+				  IRQ_APOLLO, 16);
 }
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 26a804e..6d196da 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -60,244 +60,8 @@
  * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
  * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
  * be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- *  - SLOW: The handler runs with all interrupts enabled, except the one it
- *    was called by (to avoid reentering). This should be the usual method.
- *    But it is currently possible only for MFP ints, since only the MFP
- *    offers an easy way to mask interrupts.
- *
- *  - FAST: The handler runs with all interrupts disabled. This should be used
- *    only for really fast handlers, that just do actions immediately
- *    necessary, and let the rest do a bottom half or task queue.
- *
- *  - PRIORITIZED: The handler can be interrupted by higher-level ints
- *    (greater IPL, no MFP priorities!). This is the method of choice for ints
- *    which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
  */
 
-#if 0
-
-#define	NUM_INT_SOURCES	(8 + NUM_ATARI_SOURCES)
-
-typedef void (*asm_irq_handler)(void);
-
-struct irqhandler {
-	irqreturn_t (*handler)(int, void *, struct pt_regs *);
-	void	*dev_id;
-};
-
-struct irqparam {
-	unsigned long	flags;
-	const char	*devname;
-};
-
-/*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
- */
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
-
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
-
-/* check for valid int number (complex, sigh...) */
-#define	IS_VALID_INTNO(n)											\
-	((n) > 0 &&														\
-	 /* autovec and ST-MFP ok anyway */								\
-	 (((n) < TTMFP_SOURCE_BASE) ||									\
-	  /* TT-MFP ok if present */									\
-	  ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE &&			\
-	   ATARIHW_PRESENT(TT_MFP)) ||									\
-	  /* SCC ok if present and number even */						\
-	  ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE &&			\
-	   !((n) & 1) && ATARIHW_PRESENT(SCC)) ||						\
-	  /* greater numbers ok if they are registered VME vectors */		\
-	  ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
-		  free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
-
-
-/*
- * Here start the assembler entry points for interrupts
- */
-
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define	BUILD_SLOW_IRQ(n)						   \
-asmlinkage void IRQ_NAME(n);						   \
-/* Dummy function to allow asm with operands.  */			   \
-void atari_slow_irq_##n##_dummy (void) {				   \
-__asm__ (__ALIGN_STR "\n"						   \
-"atari_slow_irq_" #n "_handler:\t"					   \
-"	addl	%6,%5\n"	/* preempt_count() += HARDIRQ_OFFSET */	   \
-	SAVE_ALL_INT "\n"						   \
-	GET_CURRENT(%%d0) "\n"						   \
-"	andb	#~(1<<(%c3&7)),%a4:w\n"	/* mask this interrupt */	   \
-	/* get old IPL from stack frame */				   \
-"	bfextu	%%sp@(%c2){#5,#3},%%d0\n"				   \
-"	movew	%%sr,%%d1\n"						   \
-"	bfins	%%d0,%%d1{#21,#3}\n"					   \
-"	movew	%%d1,%%sr\n"		/* set IPL = previous value */	   \
-"	addql	#1,%a0\n"						   \
-"	lea	%a1,%%a0\n"						   \
-"	pea	%%sp@\n"		/* push addr of frame */	   \
-"	movel	%%a0@(4),%%sp@-\n"	/* push handler data */		   \
-"	pea	(%c3+8)\n"		/* push int number */		   \
-"	movel	%%a0@,%%a0\n"						   \
-"	jbsr	%%a0@\n"		/* call the handler */		   \
-"	addql	#8,%%sp\n"						   \
-"	addql	#4,%%sp\n"						   \
-"	orw	#0x0600,%%sr\n"						   \
-"	andw	#0xfeff,%%sr\n"		/* set IPL = 6 again */		   \
-"	orb	#(1<<(%c3&7)),%a4:w\n"	/* now unmask the int again */	   \
-"	jbra	ret_from_interrupt\n"					   \
-	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
-	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
-);									   \
-	for (;;);			/* fake noreturn */		   \
-}
-
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
-	[0]	= atari_slow_irq_0_handler,
-	[1]	= atari_slow_irq_1_handler,
-	[2]	= atari_slow_irq_2_handler,
-	[3]	= atari_slow_irq_3_handler,
-	[4]	= atari_slow_irq_4_handler,
-	[5]	= atari_slow_irq_5_handler,
-	[6]	= atari_slow_irq_6_handler,
-	[7]	= atari_slow_irq_7_handler,
-	[8]	= atari_slow_irq_8_handler,
-	[9]	= atari_slow_irq_9_handler,
-	[10]	= atari_slow_irq_10_handler,
-	[11]	= atari_slow_irq_11_handler,
-	[12]	= atari_slow_irq_12_handler,
-	[13]	= atari_slow_irq_13_handler,
-	[14]	= atari_slow_irq_14_handler,
-	[15]	= atari_slow_irq_15_handler,
-	[16]	= atari_slow_irq_16_handler,
-	[17]	= atari_slow_irq_17_handler,
-	[18]	= atari_slow_irq_18_handler,
-	[19]	= atari_slow_irq_19_handler,
-	[20]	= atari_slow_irq_20_handler,
-	[21]	= atari_slow_irq_21_handler,
-	[22]	= atari_slow_irq_22_handler,
-	[23]	= atari_slow_irq_23_handler,
-	[24]	= atari_slow_irq_24_handler,
-	[25]	= atari_slow_irq_25_handler,
-	[26]	= atari_slow_irq_26_handler,
-	[27]	= atari_slow_irq_27_handler,
-	[28]	= atari_slow_irq_28_handler,
-	[29]	= atari_slow_irq_29_handler,
-	[30]	= atari_slow_irq_30_handler,
-	[31]	= atari_slow_irq_31_handler
-};
-
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands.  */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
-	"orw	#0x700,%%sr\n"		/* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
-	"addl	%3,%2\n\t"		/* preempt_count() += HARDIRQ_OFFSET */
-	SAVE_ALL_INT "\n\t"
-	GET_CURRENT(%%d0) "\n\t"
-	/* get vector number from stack frame and convert to source */
-	"bfextu	%%sp@(%c1){#4,#10},%%d0\n\t"
-	"subw	#(0x40-8),%%d0\n\t"
-	"jpl	1f\n\t"
-	"addw	#(0x40-8-0x18),%%d0\n"
-    "1:\tlea	%a0,%%a0\n\t"
-	"addql	#1,%%a0@(%%d0:l:4)\n\t"
-	"lea	irq_handler,%%a0\n\t"
-	"lea	%%a0@(%%d0:l:8),%%a0\n\t"
-	"pea	%%sp@\n\t"		/* push frame address */
-	"movel	%%a0@(4),%%sp@-\n\t"	/* push handler data */
-	"movel	%%d0,%%sp@-\n\t"	/* push int number */
-	"movel	%%a0@,%%a0\n\t"
-	"jsr	%%a0@\n\t"		/* and call the handler */
-	"addql	#8,%%sp\n\t"
-	"addql	#4,%%sp\n\t"
-	"jbra	ret_from_interrupt"
-	 : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
-	for (;;);
-}
-#endif
-
 /*
  * Bitmap for free interrupt vector numbers
  * (new vectors starting from 0x70 can be allocated by
@@ -320,31 +84,44 @@
 
 extern int atari_SCC_reset_done;
 
-static int atari_startup_irq(unsigned int irq)
+static unsigned int atari_irq_startup(struct irq_data *data)
 {
-	m68k_irq_startup(irq);
+	unsigned int irq = data->irq;
+
+	m68k_irq_startup(data);
 	atari_turnon_irq(irq);
 	atari_enable_irq(irq);
 	return 0;
 }
 
-static void atari_shutdown_irq(unsigned int irq)
+static void atari_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	atari_disable_irq(irq);
 	atari_turnoff_irq(irq);
-	m68k_irq_shutdown(irq);
+	m68k_irq_shutdown(data);
 
 	if (irq == IRQ_AUTO_4)
 	    vectors[VEC_INT4] = falcon_hblhandler;
 }
 
-static struct irq_controller atari_irq_controller = {
+static void atari_irq_enable(struct irq_data *data)
+{
+	atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+	atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
 	.name		= "atari",
-	.lock		= __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
-	.startup	= atari_startup_irq,
-	.shutdown	= atari_shutdown_irq,
-	.enable		= atari_enable_irq,
-	.disable	= atari_disable_irq,
+	.irq_startup	= atari_irq_startup,
+	.irq_shutdown	= atari_irq_shutdown,
+	.irq_enable	= atari_irq_enable,
+	.irq_disable	= atari_irq_disable,
 };
 
 /*
@@ -360,8 +137,9 @@
 
 void __init atari_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
-	m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
+	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+				  NUM_ATARI_SOURCES - 1);
 
 	/* Initialize the MFP(s) */
 
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index a0531f3..c0cc68a 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -17,6 +17,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include <asm/atariints.h>
 
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 1edd950..8128647 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -86,7 +86,7 @@
  */
 static void __init bvme6000_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_bvme6000(void)
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index 48e50f8..e301133 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -59,7 +59,7 @@
 	struct gendisk *disk;
 };
 
-static int nfhd_make_request(struct request_queue *queue, struct bio *bio)
+static void nfhd_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct nfhd_device *dev = queue->queuedata;
 	struct bio_vec *bvec;
@@ -76,7 +76,6 @@
 		sec += len;
 	}
 	bio_endio(bio, 0);
-	return 0;
 }
 
 static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index f6312c7..c87fe69 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -70,7 +70,7 @@
 
   asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
 
-  if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+  if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
     pr_err("Couldn't register timer interrupt\n");
 
   out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
index 870e534..db30ed2 100644
--- a/arch/m68k/include/asm/hardirq.h
+++ b/arch/m68k/include/asm/hardirq.h
@@ -18,6 +18,11 @@
 
 #ifdef CONFIG_MMU
 
+static inline void ack_bad_irq(unsigned int irq)
+{
+	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
+}
+
 /* entry.S is sensitive to the offsets of these fields */
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 69ed0d74..6198df5 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -27,11 +27,6 @@
 
 #ifdef CONFIG_MMU
 
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
 /*
  * Interrupt source definitions
  * General interrupt sources are the level 1-7.
@@ -54,10 +49,6 @@
 
 #define IRQ_USER	8
 
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
 /*
  * various flags for request_irq() - the Amiga now uses the standard
  * mechanism like all other architectures - IRQF_DISABLED and
@@ -71,57 +62,27 @@
 #define IRQ_FLG_STD	(0x8000)	/* internally used		*/
 #endif
 
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
-	irqreturn_t	(*handler)(int, void *);
-	void		*dev_id;
-	struct irq_node *next;
-	unsigned long	flags;
-	const char	*devname;
-} irq_node_t;
+struct irq_data;
+struct irq_chip;
+struct irq_desc;
+extern unsigned int m68k_irq_startup(struct irq_data *data);
+extern unsigned int m68k_irq_startup_irq(unsigned int irq);
+extern void m68k_irq_shutdown(struct irq_data *data);
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
+						      struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
+extern void m68k_setup_irq_controller(struct irq_chip *,
+				      void (*handle)(unsigned int irq,
+						     struct irq_desc *desc),
+				      unsigned int irq, unsigned int cnt);
 
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
-	int		(*handler)(int, void *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-};
-
-struct irq_controller {
-	const char *name;
-	spinlock_t lock;
-	int (*startup)(unsigned int irq);
-	void (*shutdown)(unsigned int irq);
-	void (*enable)(unsigned int irq);
-	void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+extern unsigned int irq_canonicalize(unsigned int irq);
 
 #else
 #define irq_canonicalize(irq)  (irq)
 #endif /* CONFIG_MMU */
 
 asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+extern atomic_t irq_err_count;
 
 #endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index c2a1c5e..12ebe43 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -12,6 +12,8 @@
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
 extern int mac_irq_pending(unsigned int);
+extern void mac_irq_enable(struct irq_data *data);
+extern void mac_irq_disable(struct irq_data *data);
 
 /*
  *	Floppy driver magic hook - probably shouldn't be here
diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h
index 3d970af..22f12c9 100644
--- a/arch/m68k/include/asm/q40ints.h
+++ b/arch/m68k/include/asm/q40ints.h
@@ -24,6 +24,3 @@
 #define Q40_IRQ10_MASK       (1<<5)
 #define Q40_IRQ14_MASK       (1<<6)
 #define Q40_IRQ15_MASK       (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index e7f0f2e..c569619 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -6,16 +6,15 @@
 extra-$(CONFIG_SUN3)	:= sun3-head.o
 extra-y			+= vmlinux.lds
 
-obj-y	:= entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
-	   sys_m68k.o syscalltable.o time.o traps.o
+obj-y	:= entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
+	   signal.o sys_m68k.o syscalltable.o time.o traps.o
 
-obj-$(CONFIG_MMU)	+= ints.o devres.o vectors.o
-devres-$(CONFIG_MMU)	= ../../../kernel/irq/devres.o
+obj-$(CONFIG_MMU)	+= ints.o vectors.o
 
 ifndef CONFIG_MMU_SUN3
 obj-y			+= dma.o
 endif
 ifndef CONFIG_MMU
-obj-y			+= init_task.o irq.o
+obj-y			+= init_task.o
 endif
 
diff --git a/arch/m68k/kernel/dma_mm.c b/arch/m68k/kernel/dma_mm.c
index 4bbb3c2..a3c471b 100644
--- a/arch/m68k/kernel/dma_mm.c
+++ b/arch/m68k/kernel/dma_mm.c
@@ -12,6 +12,7 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include <asm/pgalloc.h>
 
diff --git a/arch/m68k/kernel/dma_no.c b/arch/m68k/kernel/dma_no.c
index fc61541..f1dc3fc 100644
--- a/arch/m68k/kernel/dma_no.c
+++ b/arch/m68k/kernel/dma_no.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include <asm/cacheflush.h>
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index bd0ec05..c713f51 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -48,7 +48,7 @@
 .globl sys_fork, sys_clone, sys_vfork
 .globl ret_from_interrupt, bad_interrupt
 .globl auto_irqhandler_fixup
-.globl user_irqvec_fixup, user_irqhandler_fixup
+.globl user_irqvec_fixup
 
 .text
 ENTRY(buserr)
@@ -207,7 +207,7 @@
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
 auto_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 ret_from_interrupt:
@@ -240,8 +240,7 @@
 
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
-user_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index 761ee04..74fefac 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -4,25 +4,6 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- *           removed from request_irq() and moved to init_time().
- *           We should therefore consider renaming our add_isr() and
- *           remove_isr() to request_irq() and free_irq()
- *           respectively, so they are compliant with the other
- *           architectures.                                     /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- *           Removed irq list support, if any machine needs an irq server
- *           it must implement this itself (as it's already done), instead
- *           only default handler are used with mach_default_handler.
- *           request_irq got some flags different from other architectures:
- *           - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- *                               can be replaced without this flag)
- *           - IRQ_FLG_LOCK : handler can't be replaced
- *           There are other machine depending flags, see there
- *           If you want to replace a default handler you should know what
- *           you're doing, since it might handle different other irq sources
- *           which must be served                               /Roman Zippel
  */
 
 #include <linux/module.h>
@@ -47,33 +28,22 @@
 #endif
 
 extern u32 auto_irqhandler_fixup[];
-extern u32 user_irqhandler_fixup[];
 extern u16 user_irqvec_fixup[];
 
-/* table for system interrupt handlers */
-static struct irq_node *irq_list[NR_IRQS];
-static struct irq_controller *irq_controller[NR_IRQS];
-static int irq_depth[NR_IRQS];
-
 static int m68k_first_user_vec;
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-static struct irq_controller user_irq_controller = {
+static struct irq_chip user_irq_chip = {
 	.name		= "user",
-	.lock		= __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
 /*
  * void init_IRQ(void)
  *
@@ -96,7 +66,7 @@
 	}
 
 	for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
-		irq_controller[i] = &auto_irq_controller;
+		irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
 
 	mach_init_IRQ();
 }
@@ -106,7 +76,7 @@
  * @handler: called from auto vector interrupts
  *
  * setup the handler to be called from auto vector interrupts instead of the
- * standard __m68k_handle_int(), it will be called with irq numbers in the range
+ * standard do_IRQ(), it will be called with irq numbers in the range
  * from IRQ_AUTO_1 - IRQ_AUTO_7.
  */
 void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
@@ -120,217 +90,49 @@
  * m68k_setup_user_interrupt
  * @vec: first user vector interrupt to handle
  * @cnt: number of active user vector interrupts
- * @handler: called from user vector interrupts
  *
  * setup user vector interrupts, this includes activating the specified range
  * of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts). An optional handler can be installed
- * to be called instead of the default __m68k_handle_int(), it will be called
- * with irq numbers starting from IRQ_USER.
+ * different from auto vector interrupts).
  */
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *))
+void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
 {
 	int i;
 
 	BUG_ON(IRQ_USER + cnt > NR_IRQS);
 	m68k_first_user_vec = vec;
 	for (i = 0; i < cnt; i++)
-		irq_controller[IRQ_USER + i] = &user_irq_controller;
+		irq_set_chip(IRQ_USER + i, &user_irq_chip);
 	*user_irqvec_fixup = vec - IRQ_USER;
-	if (handler)
-		*user_irqhandler_fixup = (u32)handler;
 	flush_icache();
 }
 
 /**
  * m68k_setup_irq_controller
- * @contr: irq controller which controls specified irq
+ * @chip: irq chip which controls specified irq
+ * @handle: flow handler which handles specified irq
  * @irq: first irq to be managed by the controller
+ * @cnt: number of irqs to be managed by the controller
  *
  * Change the controller for the specified range of irq, which will be used to
  * manage these irq. auto/user irq already have a default controller, which can
  * be changed as well, but the controller probably should use m68k_irq_startup/
  * m68k_irq_shutdown.
  */
-void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq,
+void m68k_setup_irq_controller(struct irq_chip *chip,
+			       irq_flow_handler_t handle, unsigned int irq,
 			       unsigned int cnt)
 {
 	int i;
 
-	for (i = 0; i < cnt; i++)
-		irq_controller[irq + i] = contr;
+	for (i = 0; i < cnt; i++) {
+		irq_set_chip(irq + i, chip);
+		if (handle)
+			irq_set_handler(irq + i, handle);
+	}
 }
 
-irq_node_t *new_irq_node(void)
-{
-	irq_node_t *node;
-	short i;
-
-	for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) {
-		if (!node->handler) {
-			memset(node, 0, sizeof(*node));
-			return node;
-		}
-	}
-
-	printk ("new_irq_node: out of nodes\n");
-	return NULL;
-}
-
-int setup_irq(unsigned int irq, struct irq_node *node)
-{
-	struct irq_controller *contr;
-	struct irq_node **prev;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d from %s\n",
-		       __func__, irq, node->devname);
-		return -ENXIO;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	prev = irq_list + irq;
-	if (*prev) {
-		/* Can't share interrupts unless both agree to */
-		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
-			spin_unlock_irqrestore(&contr->lock, flags);
-			return -EBUSY;
-		}
-		while (*prev)
-			prev = &(*prev)->next;
-	}
-
-	if (!irq_list[irq]) {
-		if (contr->startup)
-			contr->startup(irq);
-		else
-			contr->enable(irq);
-	}
-	node->next = NULL;
-	*prev = node;
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-
-	return 0;
-}
-
-int request_irq(unsigned int irq,
-		irq_handler_t handler,
-		unsigned long flags, const char *devname, void *dev_id)
-{
-	struct irq_node *node;
-	int res;
-
-	node = new_irq_node();
-	if (!node)
-		return -ENOMEM;
-
-	node->handler = handler;
-	node->flags   = flags;
-	node->dev_id  = dev_id;
-	node->devname = devname;
-
-	res = setup_irq(irq, node);
-	if (res)
-		node->handler = NULL;
-
-	return res;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	struct irq_controller *contr;
-	struct irq_node **p, *node;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n", __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	p = irq_list + irq;
-	while ((node = *p)) {
-		if (node->dev_id == dev_id)
-			break;
-		p = &node->next;
-	}
-
-	if (node) {
-		*p = node->next;
-		node->handler = NULL;
-	} else
-		printk("%s: Removing probably wrong IRQ %d\n",
-		       __func__, irq);
-
-	if (!irq_list[irq]) {
-		if (contr->shutdown)
-			contr->shutdown(irq);
-		else
-			contr->disable(irq);
-	}
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (irq_depth[irq]) {
-		if (!--irq_depth[irq]) {
-			if (contr->enable)
-				contr->enable(irq);
-		}
-	} else
-		WARN_ON(1);
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(enable_irq);
-
-void disable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (!irq_depth[irq]++) {
-		if (contr->disable)
-			contr->disable(irq);
-	}
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-int m68k_irq_startup(unsigned int irq)
+unsigned int m68k_irq_startup_irq(unsigned int irq)
 {
 	if (irq <= IRQ_AUTO_7)
 		vectors[VEC_SPUR + irq] = auto_inthandler;
@@ -339,8 +141,15 @@
 	return 0;
 }
 
-void m68k_irq_shutdown(unsigned int irq)
+unsigned int m68k_irq_startup(struct irq_data *data)
 {
+	return m68k_irq_startup_irq(data->irq);
+}
+
+void m68k_irq_shutdown(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
 	if (irq <= IRQ_AUTO_7)
 		vectors[VEC_SPUR + irq] = bad_inthandler;
 	else
@@ -348,33 +157,6 @@
 }
 
 
-/*
- * Do we need these probe functions on the m68k?
- *
- *  ... may be useful with ISA devices
- */
-unsigned long probe_irq_on (void)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_on();
-#endif
-	return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-int probe_irq_off (unsigned long irqs)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_off(irqs);
-#endif
-	return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
 unsigned int irq_canonicalize(unsigned int irq)
 {
 #ifdef CONFIG_Q40
@@ -386,52 +168,9 @@
 
 EXPORT_SYMBOL(irq_canonicalize);
 
-asmlinkage void m68k_handle_int(unsigned int irq)
-{
-	struct irq_node *node;
-	kstat_cpu(0).irqs[irq]++;
-	node = irq_list[irq];
-	do {
-		node->handler(irq, node->dev_id);
-		node = node->next;
-	} while (node);
-}
-
-asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	old_regs = set_irq_regs(regs);
-	m68k_handle_int(irq);
-	set_irq_regs(old_regs);
-}
 
 asmlinkage void handle_badint(struct pt_regs *regs)
 {
-	kstat_cpu(0).irqs[0]++;
-	printk("unexpected interrupt from %u\n", regs->vector);
+	atomic_inc(&irq_err_count);
+	pr_warn("unexpected interrupt from %u\n", regs->vector);
 }
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	struct irq_controller *contr;
-	struct irq_node *node;
-	int i = *(loff_t *) v;
-
-	/* autovector interrupts */
-	if (irq_list[i]) {
-		contr = irq_controller[i];
-		node = irq_list[i];
-		seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname);
-		while ((node = node->next))
-			seq_printf(p, ", %s", node->devname);
-		seq_puts(p, "\n");
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
-	/* Insert /proc/irq driver here */
-}
-#endif
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 2a96beb..b403924 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,6 +11,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -20,9 +21,6 @@
 
 /* #define DEBUG_IRQS */
 
-extern void mac_enable_irq(unsigned int);
-extern void mac_disable_irq(unsigned int);
-
 int baboon_present;
 static volatile struct baboon *baboon;
 static unsigned char baboon_disabled;
@@ -53,7 +51,7 @@
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-static irqreturn_t baboon_irq(int irq, void *dev_id)
+static void baboon_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -64,15 +62,16 @@
 		(uint) baboon->mb_status);
 #endif
 
-	if (!(events = baboon->mb_ifr & 0x07))
-		return IRQ_NONE;
+	events = baboon->mb_ifr & 0x07;
+	if (!events)
+		return;
 
 	irq_num = IRQ_BABOON_0;
 	irq_bit = 1;
 	do {
 	        if (events & irq_bit) {
 			baboon->mb_ifr &= ~irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_bit <<= 1;
 		irq_num++;
@@ -82,7 +81,6 @@
 	/* for now we need to smash all interrupts */
 	baboon->mb_ifr &= ~events;
 #endif
-	return IRQ_HANDLED;
 }
 
 /*
@@ -92,8 +90,7 @@
 void __init baboon_register_interrupts(void)
 {
 	baboon_disabled = 0;
-	if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
-		pr_err("Couldn't register baboon interrupt\n");
+	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
 }
 
 /*
@@ -111,7 +108,7 @@
 
 	baboon_disabled &= ~(1 << irq_idx);
 	if (!baboon_disabled)
-		mac_enable_irq(IRQ_NUBUS_C);
+		mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_disable(int irq)
@@ -124,7 +121,7 @@
 
 	baboon_disabled |= 1 << irq_idx;
 	if (baboon_disabled)
-		mac_disable_irq(IRQ_NUBUS_C);
+		mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_clear(int irq)
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 1ad4e9d..a5462cc 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -305,15 +305,13 @@
 {
 	if (iop_ism_present) {
 		if (oss_present) {
-			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
-					IRQ_FLG_LOCK, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+					"ISM IOP", (void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
-			if (request_irq(IRQ_VIA2_0, iop_ism_irq,
-					IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+					(void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 		}
 		if (!iop_alive(iop_base[IOP_NUM_ISM])) {
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index f92190c..ba220b7 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -190,14 +190,10 @@
 
 /* #define DEBUG_MACINTS */
 
-void mac_enable_irq(unsigned int irq);
-void mac_disable_irq(unsigned int irq);
-
-static struct irq_controller mac_irq_controller = {
+static struct irq_chip mac_irq_chip = {
 	.name		= "mac",
-	.lock		= __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
-	.enable		= mac_enable_irq,
-	.disable	= mac_disable_irq,
+	.irq_enable	= mac_irq_enable,
+	.irq_disable	= mac_irq_disable,
 };
 
 void __init mac_init_IRQ(void)
@@ -205,7 +201,7 @@
 #ifdef DEBUG_MACINTS
 	printk("mac_init_IRQ(): Setting things up...\n");
 #endif
-	m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
+	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
 				  NUM_MAC_SOURCES - IRQ_USER);
 	/* Make sure the SONIC interrupt is cleared or things get ugly */
 #ifdef SHUTUP_SONIC
@@ -241,16 +237,17 @@
 }
 
 /*
- *  mac_enable_irq - enable an interrupt source
- * mac_disable_irq - disable an interrupt source
+ *  mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
  *   mac_clear_irq - clears a pending interrupt
- * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
+ * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
  *
  * These routines are just dispatchers to the VIA/OSS/PSC routines.
  */
 
-void mac_enable_irq(unsigned int irq)
+void mac_irq_enable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {
@@ -283,8 +280,9 @@
 	}
 }
 
-void mac_disable_irq(unsigned int irq)
+void mac_irq_disable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index a9c0f5a..a4c82da 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -29,10 +30,7 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-static irqreturn_t oss_irq(int, void *);
-static irqreturn_t oss_nubus_irq(int, void *);
-
-extern irqreturn_t via1_irq(int, void *);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
 
 /*
  * Initialize the OSS
@@ -60,26 +58,6 @@
 }
 
 /*
- * Register the OSS and NuBus interrupt dispatchers.
- */
-
-void __init oss_register_interrupts(void)
-{
-	if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
-			"scsi", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "scsi");
-	if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
-			"nubus", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-	if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
-			"sound", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "sound");
-	if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
-			"via1", (void *) via1))
-		pr_err("Couldn't register %s interrupt\n", "via1");
-}
-
-/*
  * Initialize OSS for Nubus access
  */
 
@@ -92,17 +70,17 @@
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-static irqreturn_t oss_irq(int irq, void *dev_id)
+static void oss_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events;
 
 	events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
-		printk("oss_irq: irq %d events = 0x%04X\n", irq,
+		printk("oss_irq: irq %u events = 0x%04X\n", irq,
 			(int) oss->irq_pending);
 	}
 #endif
@@ -113,11 +91,10 @@
 		/* FIXME: call sound handler */
 	} else if (events & OSS_IP_SCSI) {
 		oss->irq_pending &= ~OSS_IP_SCSI;
-		m68k_handle_int(IRQ_MAC_SCSI);
+		generic_handle_irq(IRQ_MAC_SCSI);
 	} else {
 		/* FIXME: error check here? */
 	}
-	return IRQ_HANDLED;
 }
 
 /*
@@ -126,13 +103,13 @@
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events, irq_bit, i;
 
 	events = oss->irq_pending & OSS_IP_NUBUS;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_NUBUS_INT
 	if (console_loglevel > 7) {
@@ -148,10 +125,21 @@
 		irq_bit >>= 1;
 		if (events & irq_bit) {
 			oss->irq_pending &= ~irq_bit;
-			m68k_handle_int(NUBUS_SOURCE_BASE + i);
+			generic_handle_irq(NUBUS_SOURCE_BASE + i);
 		}
 	} while(events & (irq_bit - 1));
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the OSS and NuBus interrupt dispatchers.
+ */
+
+void __init oss_register_interrupts(void)
+{
+	irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+	irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
 }
 
 /*
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index a4c3eb6..e6c2d20 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -18,6 +18,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -30,8 +31,6 @@
 int psc_present;
 volatile __u8 *psc;
 
-irqreturn_t psc_irq(int, void *);
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -112,52 +111,52 @@
 }
 
 /*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
-	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
-		pr_err("Couldn't register psc%d interrupt\n", 3);
-	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
-		pr_err("Couldn't register psc%d interrupt\n", 4);
-	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
-		pr_err("Couldn't register psc%d interrupt\n", 5);
-	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
-		pr_err("Couldn't register psc%d interrupt\n", 6);
-}
-
-/*
  * PSC interrupt handler. It's a lot like the VIA interrupt handler.
  */
 
-irqreturn_t psc_irq(int irq, void *dev_id)
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
 {
-	int pIFR	= pIFRbase + ((int) dev_id);
-	int pIER	= pIERbase + ((int) dev_id);
+	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+	int pIFR	= pIFRbase + offset;
+	int pIER	= pIERbase + offset;
 	int irq_num;
 	unsigned char irq_bit, events;
 
 #ifdef DEBUG_IRQS
-	printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
+	printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
 		irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
 #endif
 
 	events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = irq << 3;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			psc_write_byte(pIFR, irq_bit);
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_num++;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+	irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+	irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+	irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+	irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
 }
 
 void psc_irq_enable(int irq) {
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index e71166d..f1600ad 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -77,9 +78,6 @@
 static u8 nubus_disabled;
 
 void via_debug_dump(void);
-irqreturn_t via1_irq(int, void *);
-irqreturn_t via2_irq(int, void *);
-irqreturn_t via_nubus_irq(int, void *);
 void via_irq_enable(int irq);
 void via_irq_disable(int irq);
 void via_irq_clear(int irq);
@@ -281,40 +279,11 @@
 	via1[vT1CL] = MAC_CLOCK_LOW;
 	via1[vT1CH] = MAC_CLOCK_HIGH;
 
-	if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
 		pr_err("Couldn't register %s interrupt\n", "timer");
 }
 
 /*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
-	if (via_alt_mapping) {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "software");
-		if (request_irq(IRQ_AUTO_6, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	} else {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	}
-	if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-			"via2", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "via2");
-	if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
-			IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-}
-
-/*
  * Debugging dump, used in various places to see what's going on.
  */
 
@@ -446,48 +415,46 @@
  * via6522.c :-), disable/pending masks added.
  */
 
-irqreturn_t via1_irq(int irq, void *dev_id)
+void via1_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via1[vIFR] & via1[vIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA1_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via1[vIFR] = irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
-irqreturn_t via2_irq(int irq, void *dev_id)
+static void via2_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via2[gIFR] & via2[gIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA2_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via2[gIFR] = irq_bit | rbv_clear;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
 /*
@@ -495,7 +462,7 @@
  * VIA2 dispatcher as a fast interrupt handler.
  */
 
-irqreturn_t via_nubus_irq(int irq, void *dev_id)
+void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int slot_irq;
 	unsigned char slot_bit, events;
@@ -506,7 +473,7 @@
 	else
 		events &= ~via2[vDirA];
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	do {
 		slot_irq = IRQ_NUBUS_F;
@@ -514,7 +481,7 @@
 		do {
 			if (events & slot_bit) {
 				events &= ~slot_bit;
-				m68k_handle_int(slot_irq);
+				generic_handle_irq(slot_irq);
 			}
 			--slot_irq;
 			slot_bit >>= 1;
@@ -528,7 +495,24 @@
 		else
 			events &= ~via2[vDirA];
 	} while (events);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the interrupt dispatchers for VIA or RBV machines only.
+ */
+
+void __init via_register_interrupts(void)
+{
+	if (via_alt_mapping) {
+		/* software interrupt */
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+		/* via1 interrupt */
+		irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
+	} else {
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+	}
+	irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
+	irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
 }
 
 void via_irq_enable(int irq) {
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 6cb9c3a..5de924e 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -81,7 +81,7 @@
 
 void __init mvme147_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_mvme147(void)
@@ -114,8 +114,7 @@
 void mvme147_sched_init (irq_handler_t timer_routine)
 {
 	tick_handler = timer_routine;
-	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
-			"timer 1", NULL))
+	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
 		pr_err("Couldn't register timer interrupt\n");
 
 	/* Init the clock with a value */
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 0b28e26..31a66d9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -117,7 +117,7 @@
 
 static void __init mvme16x_init_IRQ (void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 #define pcc2chip	((volatile u_char *)0xfff42000)
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 9f0e3d5..2b88849 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -15,10 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/ptrace.h>
 #include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/traps.h>
 
 #include <asm/q40_master.h>
@@ -35,35 +35,36 @@
 */
 
 static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_enable_irq(unsigned int);
-static void q40_disable_irq(unsigned int);
+static void q40_irq_enable(struct irq_data *data);
+static void q40_irq_disable(struct irq_data *data);
 
 unsigned short q40_ablecount[35];
 unsigned short q40_state[35];
 
-static int q40_irq_startup(unsigned int irq)
+static unsigned int q40_irq_startup(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* test for ISA ints not implemented by HW */
 	switch (irq) {
 	case 1: case 2: case 8: case 9:
 	case 11: case 12: case 13:
 		printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
-		return -ENXIO;
+		/* FIXME return -ENXIO; */
 	}
 	return 0;
 }
 
-static void q40_irq_shutdown(unsigned int irq)
+static void q40_irq_shutdown(struct irq_data *data)
 {
 }
 
-static struct irq_controller q40_irq_controller = {
+static struct irq_chip q40_irq_chip = {
 	.name		= "q40",
-	.lock		= __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
-	.startup	= q40_irq_startup,
-	.shutdown	= q40_irq_shutdown,
-	.enable		= q40_enable_irq,
-	.disable	= q40_disable_irq,
+	.irq_startup	= q40_irq_startup,
+	.irq_shutdown	= q40_irq_shutdown,
+	.irq_enable	= q40_irq_enable,
+	.irq_disable	= q40_irq_disable,
 };
 
 /*
@@ -81,13 +82,14 @@
 
 void __init q40_init_IRQ(void)
 {
-	m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX);
+	m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
+				  Q40_IRQ_MAX);
 
 	/* setup handler for ISA ints */
 	m68k_setup_auto_interrupt(q40_irq_handler);
 
-	m68k_irq_startup(IRQ_AUTO_2);
-	m68k_irq_startup(IRQ_AUTO_4);
+	m68k_irq_startup_irq(IRQ_AUTO_2);
+	m68k_irq_startup_irq(IRQ_AUTO_4);
 
 	/* now enable some ints.. */
 	master_outb(1, EXT_ENABLE_REG);  /* ISA IRQ 5-15 */
@@ -218,11 +220,11 @@
 	switch (irq) {
 	case 4:
 	case 6:
-		__m68k_handle_int(Q40_IRQ_SAMPLE, fp);
+		do_IRQ(Q40_IRQ_SAMPLE, fp);
 		return;
 	}
 	if (mir & Q40_IRQ_FRAME_MASK) {
-		__m68k_handle_int(Q40_IRQ_FRAME, fp);
+		do_IRQ(Q40_IRQ_FRAME, fp);
 		master_outb(-1, FRAME_CLEAR_REG);
 	}
 	if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
@@ -257,7 +259,7 @@
 					goto iirq;
 				}
 				q40_state[irq] |= IRQ_INPROGRESS;
-				__m68k_handle_int(irq, fp);
+				do_IRQ(irq, fp);
 				q40_state[irq] &= ~IRQ_INPROGRESS;
 
 				/* naively enable everything, if that fails than    */
@@ -288,25 +290,29 @@
 	mir = master_inb(IIRQ_REG);
 	/* should test whether keyboard irq is really enabled, doing it in defhand */
 	if (mir & Q40_IRQ_KEYB_MASK)
-		__m68k_handle_int(Q40_IRQ_KEYBOARD, fp);
+		do_IRQ(Q40_IRQ_KEYBOARD, fp);
 
 	return;
 }
 
-void q40_enable_irq(unsigned int irq)
+void q40_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= 5 && irq <= 15) {
 		mext_disabled--;
 		if (mext_disabled > 0)
-			printk("q40_enable_irq : nested disable/enable\n");
+			printk("q40_irq_enable : nested disable/enable\n");
 		if (mext_disabled == 0)
 			master_outb(1, EXT_ENABLE_REG);
 	}
 }
 
 
-void q40_disable_irq(unsigned int irq)
+void q40_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* disable ISA iqs : only do something if the driver has been
 	 * verified to be Q40 "compatible" - right now IDE, NE2K
 	 * Any driver should not attempt to sleep across disable_irq !!
@@ -319,13 +325,3 @@
 			printk("disable_irq nesting count %d\n",mext_disabled);
 	}
 }
-
-unsigned long q40_probe_irq_on(void)
-{
-	printk("irq probing not working - reconfigure the driver to avoid this\n");
-	return -1;
-}
-int q40_probe_irq_off(unsigned long irqs)
-{
-	return -1;
-}
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index 6464ad3..78b60f5 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -51,25 +51,29 @@
 
 static irqreturn_t sun3_int7(int irq, void *dev_id)
 {
-	*sun3_intreg |=  (1 << irq);
-	if (!(kstat_cpu(0).irqs[irq] % 2000))
-		sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]);
+	unsigned int cnt;
+
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 2000))
+		sun3_leds(led_pattern[cnt % 16000 / 2000]);
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sun3_int5(int irq, void *dev_id)
 {
+	unsigned int cnt;
+
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
-        *sun3_intreg |=  (1 << irq);
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
 	xtime_update(1);
 	update_process_times(user_mode(get_irq_regs()));
-        if (!(kstat_cpu(0).irqs[irq] % 20))
-                sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]);
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 20))
+		sun3_leds(led_pattern[cnt % 160 / 20]);
 	return IRQ_HANDLED;
 }
 
@@ -79,29 +83,33 @@
 	return IRQ_HANDLED;
 }
 
-static void sun3_inthandle(unsigned int irq, struct pt_regs *fp)
+static void sun3_irq_enable(struct irq_data *data)
 {
-        *sun3_intreg &= ~(1 << irq);
+    sun3_enable_irq(data->irq);
+};
 
-	__m68k_handle_int(irq, fp);
-}
+static void sun3_irq_disable(struct irq_data *data)
+{
+    sun3_disable_irq(data->irq);
+};
 
-static struct irq_controller sun3_irq_controller = {
+static struct irq_chip sun3_irq_chip = {
 	.name		= "sun3",
-	.lock		= __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
-	.enable		= sun3_enable_irq,
-	.disable	= sun3_disable_irq,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
+	.irq_enable	= sun3_irq_enable,
+	.irq_disable	= sun3_irq_disable,
+	.irq_mask	= sun3_irq_disable,
+	.irq_unmask	= sun3_irq_enable,
 };
 
 void __init sun3_init_IRQ(void)
 {
 	*sun3_intreg = 1;
 
-	m68k_setup_auto_interrupt(sun3_inthandle);
-	m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
-	m68k_setup_user_interrupt(VEC_USER, 128, NULL);
+	m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
+				  7);
+	m68k_setup_user_interrupt(VEC_USER, 128);
 
 	if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
 		pr_err("Couldn't register %s interrupt\n", "int5");
diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h
deleted file mode 100644
index 61d60b8..0000000
--- a/arch/microblaze/include/asm/namei.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_NAMEI_H
-#define _ASM_MICROBLAZE_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-#define __emul_prefix() NULL
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_NAMEI_H */
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index dc6416d..65a4af4 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -10,6 +10,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/gfp.h>
 #include <linux/dma-debug.h>
+#include <linux/export.h>
 #include <asm/bug.h>
 
 /*
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index ce7ac84..e5d63a8 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -18,6 +18,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/irq.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
 
 #include <asm/prom.h>
 
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 36a133e..565d193 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/pfn.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
+#include <linux/export.h>
 
 #include <asm/page.h>
 #include <asm/mmu_context.h>
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
index 3fbf16f..57acda8 100644
--- a/arch/microblaze/pci/iomap.c
+++ b/arch/microblaze/pci/iomap.c
@@ -6,6 +6,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/mm.h>
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/pci-bridge.h>
 
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 4cfae20..db841c7 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -30,6 +30,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cbc6d8..d46f1da 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -47,6 +47,8 @@
 	select GENERIC_GPIO
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SYS_SUPPORTS_ZBOOT
+	select USB_ARCH_HAS_OHCI
+	select USB_ARCH_HAS_EHCI
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -206,6 +208,7 @@
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PWM
 	select HAVE_CLK
+	select GENERIC_IRQ_CHIP
 
 config LANTIQ
 	bool "Lantiq based platforms"
@@ -817,10 +820,6 @@
 	bool
 	default n
 
-config ARCH_SUPPORTS_OPROFILE
-	bool
-	default y if !MIPS_MT_SMTC
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -2092,7 +2091,7 @@
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2252,16 +2251,6 @@
 
 source "kernel/Kconfig.preempt"
 
-config MIPS_INSANE_LARGE
-	bool "Support for large 64-bit configurations"
-	depends on CPU_R10000 && 64BIT
-	help
-	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-	  previous 64-bit processors which only supported 40 bit / 1TB. If you
-	  need processes of more than 1TB virtual address space, say Y here.
-	  This will result in additional memory usage, so it is not
-	  recommended for normal users.
-
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 53e3514..0be3186 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -226,7 +226,7 @@
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
-	sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
+	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
 ifdef CONFIG_64BIT
 CHECKFLAGS		+= -m64
 endif
@@ -286,16 +286,18 @@
 archprepare:
 ifdef CONFIG_MIPS32_N32
 	@echo '  Checking missing-syscalls for N32'
-	$(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32"
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
 endif
 ifdef CONFIG_MIPS32_O32
 	@echo '  Checking missing-syscalls for O32'
-	$(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32"
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
 endif
 
 install:
 	$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 	$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
+endif
 	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
 	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
 
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2ccfd4a..2a68be6 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -18,20 +18,20 @@
 	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_BOSPORUS
 	bool "Alchemy Bosporus board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1000
 	bool "Alchemy DB1000 board"
-	select SOC_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -39,14 +39,14 @@
 
 config MIPS_DB1100
 	bool "Alchemy DB1100 board"
-	select SOC_AU1100
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
 	bool "Alchemy DB1200 board"
-	select SOC_AU1200
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -54,7 +54,7 @@
 
 config MIPS_DB1500
 	bool "Alchemy DB1500 board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -64,7 +64,7 @@
 
 config MIPS_DB1550
 	bool "Alchemy DB1550 board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -74,13 +74,13 @@
 config MIPS_MIRAGE
 	bool "Alchemy Mirage board"
 	select DMA_NONCOHERENT
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1000
 	bool "Alchemy PB1000 board"
-	select SOC_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
@@ -89,7 +89,7 @@
 
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
-	select SOC_AU1100
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
@@ -98,7 +98,7 @@
 
 config MIPS_PB1200
 	bool "Alchemy PB1200 board"
-	select SOC_AU1200
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -106,7 +106,7 @@
 
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -114,7 +114,7 @@
 
 config MIPS_PB1550
 	bool "Alchemy PB1550 board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -124,13 +124,13 @@
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
-	select SOC_AU1500
+	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
-	select SOC_AU1550
+	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
@@ -138,23 +138,3 @@
 	select SYS_HAS_EARLY_PRINTK
 
 endchoice
-
-config SOC_AU1000
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1100
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1500
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1550
-	bool
-	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1200
-	bool
-	select ALCHEMY_GPIOINT_AU1000
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 27811fe..811ece7 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -12,9 +12,5 @@
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- ifeq ($(CONFIG_GPIOLIB),y)
-  obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
- endif
+ obj-$(CONFIG_GPIOLIB) += gpiolib.o
 endif
-
-obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3a5abb5..0e63ee4 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -40,8 +40,6 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-
 /*
  * The Descriptor Based DMA supports up to 16 channels.
  *
@@ -62,120 +60,96 @@
 			(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
 static int dbdma_initialized;
 
-static dbdev_tab_t dbdev_tab[] = {
-#ifdef CONFIG_SOC_AU1550
+static dbdev_tab_t *dbdev_tab;
+
+static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
 	/* UARTS */
-	{ DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
-	{ DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
-	{ DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
-	{ DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8, 0x11400000, 0, 0 },
 
 	/* EXT DMA */
-	{ DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
 
 	/* USB DEV */
-	{ DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
-	{ DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
-	{ DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
-	{ DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
-	{ DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
-	{ DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN,  4, 8, 0x10200000, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN,  4, 8, 0x10200010, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN,  4, 8, 0x10200014, 0, 0 },
 
-	/* PSC 0 */
-	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+	/* PSCs */
+	{ AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,  0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,  0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,  0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,  0, 0, 0x10b0001c, 0, 0 },
 
-	/* PSC 1 */
-	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
-
-	/* PSC 2 */
-	{ DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
-
-	/* PSC 3 */
-	{ DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
-
-	{ DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 },	/* PCI */
-	{ DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 },	/* NAND */
+	{ AU1550_DSCR_CMD0_PCI_WRITE,  0, 0, 0, 0x00000000, 0, 0 },  /* PCI */
+	{ AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
 
 	/* MAC 0 */
-	{ DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
 
 	/* MAC 1 */
-	{ DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-
-#endif /* CONFIG_SOC_AU1550 */
-
-#ifdef CONFIG_SOC_AU1200
-	{ DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
-	{ DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
-	{ DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
-	{ DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
-
-	{ DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
-
-	{ DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
-	{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
-	{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
-	{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
-
-	{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
-	{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
-
-	{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
-	{ DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
-	{ DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
-	{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
-	{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
-	{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
-	{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
-	{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
-	{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-
-#endif /* CONFIG_SOC_AU1200 */
+	{ AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
 
 	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-	{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
-	/* Provide 16 user definable device types */
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
-	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 };
 
-#define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
+static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
+	{ AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8, 0x11200000, 0, 0 },
 
+	{ AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8, 0x10600004, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  4, 8, 0x10680004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+	{ AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_PSC0_TX,   DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_RX,   DEV_FLAGS_IN,  0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_TX,   DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_RX,   DEV_FLAGS_IN,  0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_CIM_RXA,  DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXB,  DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXC,  DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+/* 32 predefined plus 32 custom */
+#define DBDEV_TAB_SIZE		64
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
@@ -1028,38 +1002,43 @@
 	.resume		= alchemy_dbdma_resume,
 };
 
-static int __init au1xxx_dbdma_init(void)
+static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
 {
-	int irq_nr, ret;
+	int ret;
+
+	dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL);
+	if (!dbdev_tab)
+		return -ENOMEM;
+
+	memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
+	for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
+		dbdev_tab[ret].dev_id = ~0;
 
 	dbdma_gptr->ddma_config = 0;
 	dbdma_gptr->ddma_throttle = 0;
 	dbdma_gptr->ddma_inten = 0xffff;
 	au_sync();
 
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1550:
-		irq_nr = AU1550_DDMA_INT;
-		break;
-	case ALCHEMY_CPU_AU1200:
-		irq_nr = AU1200_DDMA_INT;
-		break;
-	default:
-		return -ENODEV;
-	}
-
-	ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
-			"Au1xxx dbdma", (void *)dbdma_gptr);
+	ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma",
+			  (void *)dbdma_gptr);
 	if (ret)
 		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
 	else {
 		dbdma_initialized = 1;
-		printk(KERN_INFO "Alchemy DBDMA initialized\n");
 		register_syscore_ops(&alchemy_dbdma_syscore_ops);
 	}
 
 	return ret;
 }
-subsys_initcall(au1xxx_dbdma_init);
 
-#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
+static int __init alchemy_dbdma_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
+	case ALCHEMY_CPU_AU1200:
+		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	}
+	return 0;
+}
+subsys_initcall(alchemy_dbdma_init);
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 347980e..9b624e2 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -40,8 +40,6 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
-    defined(CONFIG_SOC_AU1100)
 /*
  * A note on resource allocation:
  *
@@ -88,12 +86,12 @@
 	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
 	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
 	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
-	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
 	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
@@ -170,13 +168,13 @@
 	const struct dma_dev *dev;
 	int i, ret;
 
-#if defined(CONFIG_SOC_AU1100)
-	if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
-		return -EINVAL;
-#else
-	if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
-		return -EINVAL;
-#endif
+	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
+		if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
+			return -EINVAL;
+	} else {
+		if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+			return -EINVAL;
+	}
 
 	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
 		if (au1000_dma_table[i].dev_id < 0)
@@ -239,30 +237,28 @@
 
 static int __init au1000_dma_init(void)
 {
-        int base, i;
+	int base, i;
 
-        switch (alchemy_get_cputype()) {
-        case ALCHEMY_CPU_AU1000:
-                base = AU1000_DMA_INT_BASE;
-                break;
-        case ALCHEMY_CPU_AU1500:
-                base = AU1500_DMA_INT_BASE;
-                break;
-        case ALCHEMY_CPU_AU1100:
-                base = AU1100_DMA_INT_BASE;
-                break;
-        default:
-                goto out;
-        }
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		base = AU1000_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1500:
+		base = AU1500_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1100:
+		base = AU1100_DMA_INT_BASE;
+		break;
+	default:
+		goto out;
+	}
 
-        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
-                au1000_dma_table[i].irq = base + i;
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+		au1000_dma_table[i].irq = base + i;
 
-        printk(KERN_INFO "Alchemy DMA initialized\n");
+	printk(KERN_INFO "Alchemy DMA initialized\n");
 
 out:
-        return 0;
+	return 0;
 }
 arch_initcall(au1000_dma_init);
-
-#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib.c
similarity index 83%
rename from arch/mips/alchemy/common/gpiolib-au1000.c
rename to arch/mips/alchemy/common/gpiolib.c
index c8e1a94..91fb4d9 100644
--- a/arch/mips/alchemy/common/gpiolib-au1000.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0.
+ *	GPIOLIB support for Alchemy chips.
  *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
@@ -23,18 +23,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *  Notes :
- * 	au1000 SoC have only one GPIO block : GPIO1
- * 	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	This file must ONLY be built when CONFIG_GPIOLIB=y and
+ *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
+ *	au1000 SoC have only one GPIO block : GPIO1
+ *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -115,12 +115,19 @@
 	},
 };
 
-static int __init alchemy_gpiolib_init(void)
+static int __init alchemy_gpiochip_init(void)
 {
-	gpiochip_add(&alchemy_gpio_chip[0]);
-	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
-		gpiochip_add(&alchemy_gpio_chip[1]);
+	int ret = 0;
 
-	return 0;
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		ret = gpiochip_add(&alchemy_gpio_chip[0]);
+		break;
+	case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+		ret = gpiochip_add(&alchemy_gpio_chip[0]);
+		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+		break;
+	}
+	return ret;
 }
-arch_initcall(alchemy_gpiolib_init);
+arch_initcall(alchemy_gpiochip_init);
diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c
deleted file mode 100644
index 7866cf5..0000000
--- a/arch/mips/alchemy/common/pci.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Alchemy/AMD Au1x00 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- *  Support for all devices (greater than 16) added by David Gathright.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-/* TBD */
-static struct resource pci_io_resource = {
-	.start	= PCI_IO_START,
-	.end	= PCI_IO_END,
-	.name	= "PCI IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PCI_MEM_START,
-	.end	= PCI_MEM_END,
-	.name	= "PCI memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops au1x_pci_ops;
-
-static struct pci_controller au1x_controller = {
-	.pci_ops	= &au1x_pci_ops,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-static unsigned long virt_io_addr;
-#endif
-
-static int __init au1x_pci_setup(void)
-{
-	extern void au1x_pci_cfg_init(void);
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-	virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
-			Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
-
-	if (!virt_io_addr) {
-		printk(KERN_ERR "Unable to ioremap pci space\n");
-		return 1;
-	}
-	au1x_controller.io_map_base = virt_io_addr;
-
-#ifdef CONFIG_DMA_NONCOHERENT
-	{
-		/*
-		 *  Set the NC bit in controller for Au1500 pre-AC silicon
-		 */
-		u32 prid = read_c0_prid();
-
-		if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
-			au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
-				  Au1500_PCI_CFG);
-			printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
-		}
-	}
-#endif
-
-	set_io_port_base(virt_io_addr);
-#endif
-
-	au1x_pci_cfg_init();
-
-	register_pci_controller(&au1x_controller);
-	return 0;
-}
-
-arch_initcall(au1x_pci_setup);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index f72c48d..c8e5d72 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -18,7 +18,7 @@
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
@@ -111,270 +111,87 @@
 		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
 }
 
-/* OHCI (USB full speed host controller) */
-static struct resource au1xxx_usb_ohci_resources[] = {
-	[0] = {
-		.start		= USB_OHCI_BASE,
-		.end		= USB_OHCI_BASE + USB_OHCI_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= FOR_PLATFORM_C_USB_HOST_INT,
-		.end		= FOR_PLATFORM_C_USB_HOST_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+
+/* The dmamask must be set for OHCI/EHCI to work */
+static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
+static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
 };
 
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_ohci_device = {
-	.name		= "au1xxx-ohci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1xxx_usb_ohci_resources),
-	.resource	= au1xxx_usb_ohci_resources,
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
 };
 
-/*** AU1100 LCD controller ***/
-
-#ifdef CONFIG_FB_AU1100
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start          = LCD_PHYS_ADDR,
-		.end            = LCD_PHYS_ADDR + 0x800 - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = AU1100_LCD_INT,
-		.end            = AU1100_LCD_INT,
-		.flags          = IORESOURCE_IRQ,
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+	*r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!*r)
+		return -ENOMEM;
+	*d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+	if (!*d) {
+		kfree(*r);
+		return -ENOMEM;
 	}
-};
 
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+	(*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	(*d)->num_resources = 2;
+	(*d)->resource = *r;
 
-static struct platform_device au1100_lcd_device = {
-	.name           = "au1100-lcd",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = &au1100_lcd_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
-	.resource       = au1100_lcd_resources,
-};
-#endif
+	return 0;
+}
 
-#ifdef CONFIG_SOC_AU1200
-/* EHCI (USB high speed host controller) */
-static struct resource au1xxx_usb_ehci_resources[] = {
-	[0] = {
-		.start		= USB_EHCI_BASE,
-		.end		= USB_EHCI_BASE + USB_EHCI_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1200_USB_INT,
-		.end		= AU1200_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
+static void __init alchemy_setup_usb(int ctype)
+{
+	struct resource *res;
+	struct platform_device *pdev;
 
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
+	/* setup OHCI0.  Every variant has one */
+	if (_new_usbres(&res, &pdev))
+		return;
 
-static struct platform_device au1xxx_usb_ehci_device = {
-	.name		= "au1xxx-ehci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
-	.resource	= au1xxx_usb_ehci_resources,
-};
+	res[0].start = alchemy_ohci_data[ctype][0];
+	res[0].end = res[0].start + 0x100 - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = alchemy_ohci_data[ctype][1];
+	res[1].end = res[1].start;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->name = "au1xxx-ohci";
+	pdev->id = 0;
+	pdev->dev.dma_mask = &alchemy_ohci_dmamask;
 
-/* Au1200 UDC (USB gadget controller) */
-static struct resource au1xxx_usb_gdt_resources[] = {
-	[0] = {
-		.start		= USB_UDC_BASE,
-		.end		= USB_UDC_BASE + USB_UDC_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1200_USB_INT,
-		.end		= AU1200_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
+	if (platform_device_register(pdev))
+		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
 
-static u64 udc_dmamask = DMA_BIT_MASK(32);
 
-static struct platform_device au1xxx_usb_gdt_device = {
-	.name		= "au1xxx-udc",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
-	.resource	= au1xxx_usb_gdt_resources,
-};
+	/* setup EHCI0: Au1200 */
+	if (ctype == ALCHEMY_CPU_AU1200) {
+		if (_new_usbres(&res, &pdev))
+			return;
 
-/* Au1200 UOC (USB OTG controller) */
-static struct resource au1xxx_usb_otg_resources[] = {
-	[0] = {
-		.start		= USB_UOC_BASE,
-		.end		= USB_UOC_BASE + USB_UOC_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1200_USB_INT,
-		.end		= AU1200_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
+		res[0].start = alchemy_ehci_data[ctype][0];
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = alchemy_ehci_data[ctype][1];
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "au1xxx-ehci";
+		pdev->id = 0;
+		pdev->dev.dma_mask = &alchemy_ehci_dmamask;
 
-static u64 uoc_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_otg_device = {
-	.name		= "au1xxx-uoc",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &uoc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
-	.resource	= au1xxx_usb_otg_resources,
-};
-
-static struct resource au1200_lcd_resources[] = {
-	[0] = {
-		.start          = LCD_PHYS_ADDR,
-		.end            = LCD_PHYS_ADDR + 0x800 - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = AU1200_LCD_INT,
-		.end            = AU1200_LCD_INT,
-		.flags          = IORESOURCE_IRQ,
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
 	}
-};
-
-static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1200_lcd_device = {
-	.name           = "au1200-lcd",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = &au1200_lcd_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
-	.resource       = au1200_lcd_resources,
-};
-
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
-
-extern struct au1xmmc_platform_data au1xmmc_platdata[2];
-
-static struct resource au1200_mmc0_resources[] = {
-	[0] = {
-		.start          = AU1100_SD0_PHYS_ADDR,
-		.end            = AU1100_SD0_PHYS_ADDR + 0xfff,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1200_SD_INT,
-		.end		= AU1200_SD_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= DSCR_CMD0_SDMS_TX0,
-		.end		= DSCR_CMD0_SDMS_TX0,
-		.flags		= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start          = DSCR_CMD0_SDMS_RX0,
-		.end		= DSCR_CMD0_SDMS_RX0,
-		.flags          = IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device au1200_mmc0_device = {
-	.name = "au1xxx-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &au1xmmc_platdata[0],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
-	.resource	= au1200_mmc0_resources,
-};
-
-#ifndef CONFIG_MIPS_DB1200
-static struct resource au1200_mmc1_resources[] = {
-	[0] = {
-		.start          = AU1100_SD1_PHYS_ADDR,
-		.end            = AU1100_SD1_PHYS_ADDR + 0xfff,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1200_SD_INT,
-		.end		= AU1200_SD_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= DSCR_CMD0_SDMS_TX1,
-		.end		= DSCR_CMD0_SDMS_TX1,
-		.flags		= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start          = DSCR_CMD0_SDMS_RX1,
-		.end		= DSCR_CMD0_SDMS_RX1,
-		.flags          = IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device au1200_mmc1_device = {
-	.name = "au1xxx-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &au1xmmc_platdata[1],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc1_resources),
-	.resource	= au1200_mmc1_resources,
-};
-#endif /* #ifndef CONFIG_MIPS_DB1200 */
-#endif /* #ifdef CONFIG_SOC_AU1200 */
-
-/* All Alchemy demoboards with I2C have this #define in their headers */
-#ifdef SMBUS_PSC_BASE
-static struct resource pbdb_smbus_resources[] = {
-	{
-		.start	= CPHYSADDR(SMBUS_PSC_BASE),
-		.end	= CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device pbdb_smbus_device = {
-	.name		= "au1xpsc_smbus",
-	.id		= 0,	/* bus number */
-	.num_resources	= ARRAY_SIZE(pbdb_smbus_resources),
-	.resource	= pbdb_smbus_resources,
-};
-#endif
+}
 
 /* Macro to help defining the Ethernet MAC resources */
-#define MAC_RES_COUNT	3	/* MAC regs base, MAC enable reg, MAC INT */
-#define MAC_RES(_base, _enable, _irq)			\
+#define MAC_RES_COUNT	4	/* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma)		\
 	{						\
 		.start	= _base,			\
 		.end	= _base + 0xffff,		\
@@ -389,28 +206,37 @@
 		.start	= _irq,				\
 		.end	= _irq,				\
 		.flags	= IORESOURCE_IRQ		\
+	},						\
+	{						\
+		.start	= _macdma,			\
+		.end	= _macdma + 0x1ff,		\
+		.flags	= IORESOURCE_MEM,		\
 	}
 
 static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
 	[ALCHEMY_CPU_AU1000] = {
 		MAC_RES(AU1000_MAC0_PHYS_ADDR,
 			AU1000_MACEN_PHYS_ADDR,
-			AU1000_MAC0_DMA_INT)
+			AU1000_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
 	},
 	[ALCHEMY_CPU_AU1500] = {
 		MAC_RES(AU1500_MAC0_PHYS_ADDR,
 			AU1500_MACEN_PHYS_ADDR,
-			AU1500_MAC0_DMA_INT)
+			AU1500_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
 	},
 	[ALCHEMY_CPU_AU1100] = {
 		MAC_RES(AU1000_MAC0_PHYS_ADDR,
 			AU1000_MACEN_PHYS_ADDR,
-			AU1100_MAC0_DMA_INT)
+			AU1100_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
 	},
 	[ALCHEMY_CPU_AU1550] = {
 		MAC_RES(AU1000_MAC0_PHYS_ADDR,
 			AU1000_MACEN_PHYS_ADDR,
-			AU1550_MAC0_DMA_INT)
+			AU1550_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
 	},
 };
 
@@ -429,17 +255,20 @@
 	[ALCHEMY_CPU_AU1000] = {
 		MAC_RES(AU1000_MAC1_PHYS_ADDR,
 			AU1000_MACEN_PHYS_ADDR + 4,
-			AU1000_MAC1_DMA_INT)
+			AU1000_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
 	},
 	[ALCHEMY_CPU_AU1500] = {
 		MAC_RES(AU1500_MAC1_PHYS_ADDR,
 			AU1500_MACEN_PHYS_ADDR + 4,
-			AU1500_MAC1_DMA_INT)
+			AU1500_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
 	},
 	[ALCHEMY_CPU_AU1550] = {
 		MAC_RES(AU1000_MAC1_PHYS_ADDR,
 			AU1000_MACEN_PHYS_ADDR + 4,
-			AU1550_MAC1_DMA_INT)
+			AU1550_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
 	},
 };
 
@@ -521,36 +350,15 @@
 	}
 }
 
-static struct platform_device *au1xxx_platform_devices[] __initdata = {
-	&au1xxx_usb_ohci_device,
-#ifdef CONFIG_FB_AU1100
-	&au1100_lcd_device,
-#endif
-#ifdef CONFIG_SOC_AU1200
-	&au1xxx_usb_ehci_device,
-	&au1xxx_usb_gdt_device,
-	&au1xxx_usb_otg_device,
-	&au1200_lcd_device,
-	&au1200_mmc0_device,
-#ifndef CONFIG_MIPS_DB1200
-	&au1200_mmc1_device,
-#endif
-#endif
-#ifdef SMBUS_PSC_BASE
-	&pbdb_smbus_device,
-#endif
-};
-
 static int __init au1xxx_platform_init(void)
 {
-	int err, ctype = alchemy_get_cputype();
+	int ctype = alchemy_get_cputype();
 
 	alchemy_setup_uarts(ctype);
 	alchemy_setup_macs(ctype);
+	alchemy_setup_usb(ctype);
 
-	err = platform_add_devices(au1xxx_platform_devices,
-				   ARRAY_SIZE(au1xxx_platform_devices));
-	return err;
+	return 0;
 }
 
 arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index b86324a..bdd6651 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -37,8 +37,6 @@
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#ifdef CONFIG_PM
-
 /*
  * We need to save/restore a bunch of core registers that are
  * either volatile or reset to some state across a processor sleep.
@@ -49,7 +47,6 @@
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int sleep_usb[2];
 static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
 static unsigned int sleep_static_memctlr[4][3];
@@ -57,31 +54,6 @@
 
 static void save_core_regs(void)
 {
-#ifndef CONFIG_SOC_AU1200
-	/* Shutdown USB host/device. */
-	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
-	/* There appears to be some undocumented reset register.... */
-	au_writel(0, 0xb0100004);
-	au_sync();
-	au_writel(0, USB_HOST_CONFIG);
-	au_sync();
-
-	sleep_usb[1] = au_readl(USBD_ENABLE);
-	au_writel(0, USBD_ENABLE);
-	au_sync();
-
-#else	/* AU1200 */
-
-	/* enable access to OTG mmio so we can save OTG CAP/MUX.
-	 * FIXME: write an OTG driver and move this stuff there!
-	 */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-	sleep_usb[0] = au_readl(0xb4020020);	/* OTG_CAP */
-	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
-#endif
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -125,22 +97,6 @@
 	au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
 	au_sync();
 
-#ifndef CONFIG_SOC_AU1200
-	au_writel(sleep_usb[0], USB_HOST_CONFIG);
-	au_writel(sleep_usb[1], USBD_ENABLE);
-	au_sync();
-#else
-	/* enable access to OTG memory */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-
-	/* restore OTG caps and port mux. */
-	au_writel(sleep_usb[0], 0xb4020020 + 0);	/* OTG_CAP */
-	au_sync();
-	au_writel(sleep_usb[1], 0xb4020020 + 4);	/* OTG_MUX */
-	au_sync();
-#endif
-
 	/* Restore the static memory controller configuration. */
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
 	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
@@ -174,5 +130,3 @@
 
 	restore_core_regs();
 }
-
-#endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1b887c8..37ffd99 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -73,8 +73,8 @@
 /* This routine should be valid for all Au1x based boards */
 phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
-	u32 start = (u32)Au1500_PCI_MEM_START;
-	u32 end   = (u32)Au1500_PCI_MEM_END;
+	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
 
 	/* Don't fixup 36-bit addresses */
 	if ((phys_addr >> 32) != 0)
@@ -82,7 +82,7 @@
 
 	/* Check for PCI memory window */
 	if (phys_addr >= start && (phys_addr + size - 1) <= end)
-		return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
+		return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
 
 	/* default nop */
 	return phys_addr;
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index dda090b..c61867c 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -213,7 +213,12 @@
 		.start	= DB1200_IDE_INT,
 		.end	= DB1200_IDE_INT,
 		.flags	= IORESOURCE_IRQ,
-	}
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
 static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -328,23 +333,85 @@
 	.brightness_set	= db1200_mmcled_set,
 };
 
-/* needed by arch/mips/alchemy/common/platform.c */
-struct au1xmmc_platform_data au1xmmc_platdata[] = {
+static struct au1xmmc_platform_data db1200mmc_platdata = {
+	.cd_setup	= db1200_mmc_cd_setup,
+	.set_power	= db1200_mmc_set_power,
+	.card_inserted	= db1200_mmc_card_inserted,
+	.card_readonly	= db1200_mmc_card_readonly,
+	.led		= &db1200_mmc_led,
+};
+
+static struct resource au1200_mmc0_resources[] = {
 	[0] = {
-		.cd_setup	= db1200_mmc_cd_setup,
-		.set_power	= db1200_mmc_set_power,
-		.card_inserted	= db1200_mmc_card_inserted,
-		.card_readonly	= db1200_mmc_card_readonly,
-		.led		= &db1200_mmc_led,
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct platform_device db1200_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200mmc_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
+	.resource	= au1200_mmc0_resources,
+};
+
+/**********************************************************************/
+
+static struct resource au1200_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_LCD_INT,
+		.end	= AU1200_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
+	.resource	= au1200_lcd_res,
 };
 
 /**********************************************************************/
 
 static struct resource au1200_psc0_res[] = {
 	[0] = {
-		.start	= PSC0_PHYS_ADDR,
-		.end	= PSC0_PHYS_ADDR + 0x000fffff,
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -353,13 +420,13 @@
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= DSCR_CMD0_PSC0_TX,
-		.end	= DSCR_CMD0_PSC0_TX,
+		.start	= AU1200_DSCR_CMD0_PSC0_TX,
+		.end	= AU1200_DSCR_CMD0_PSC0_TX,
 		.flags	= IORESOURCE_DMA,
 	},
 	[3] = {
-		.start	= DSCR_CMD0_PSC0_RX,
-		.end	= DSCR_CMD0_PSC0_RX,
+		.start	= AU1200_DSCR_CMD0_PSC0_RX,
+		.end	= AU1200_DSCR_CMD0_PSC0_RX,
 		.flags	= IORESOURCE_DMA,
 	},
 };
@@ -401,8 +468,8 @@
 
 static struct resource au1200_psc1_res[] = {
 	[0] = {
-		.start	= PSC1_PHYS_ADDR,
-		.end	= PSC1_PHYS_ADDR + 0x000fffff,
+		.start	= AU1550_PSC1_PHYS_ADDR,
+		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -411,13 +478,13 @@
 		.flags	= IORESOURCE_IRQ,
 	},
 	[2] = {
-		.start	= DSCR_CMD0_PSC1_TX,
-		.end	= DSCR_CMD0_PSC1_TX,
+		.start	= AU1200_DSCR_CMD0_PSC1_TX,
+		.end	= AU1200_DSCR_CMD0_PSC1_TX,
 		.flags	= IORESOURCE_DMA,
 	},
 	[3] = {
-		.start	= DSCR_CMD0_PSC1_RX,
-		.end	= DSCR_CMD0_PSC1_RX,
+		.start	= AU1200_DSCR_CMD0_PSC1_RX,
+		.end	= AU1200_DSCR_CMD0_PSC1_RX,
 		.flags	= IORESOURCE_DMA,
 	},
 };
@@ -449,6 +516,8 @@
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
+	&db1200_mmc0_dev,
+	&au1200_lcd_dev,
 	&db1200_eth_dev,
 	&db1200_rtc_dev,
 	&db1200_nand_dev,
@@ -526,32 +595,28 @@
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 	__raw_writel(PSC_SEL_CLK_SERCLK,
-		(void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+		(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    DB1200_PC0_INT,
-				    DB1200_PC0_INSERT_INT,
-				    /*DB1200_PC0_STSCHG_INT*/0,
-				    DB1200_PC0_EJECT_INT,
-				    0);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
+		/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-				    DB1200_PC1_INT,
-				    DB1200_PC1_INSERT_INT,
-				    /*DB1200_PC1_STSCHG_INT*/0,
-				    DB1200_PC1_EJECT_INT,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
+		/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(64 << 20, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 5c956fe..7cd36e6 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -40,24 +40,6 @@
 
 #include <prom.h>
 
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-#endif
-
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
-	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
-	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
 #ifdef CONFIG_MIPS_BOSPORUS
 char irq_tab_alchemy[][5] __initdata = {
 	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
@@ -91,12 +73,6 @@
 
 
 #ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
-	[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
-};
-
 static void mirage_power_off(void)
 {
 	alchemy_gpio_direction_output(210, 1);
@@ -158,9 +134,7 @@
 	/* initialize board register space */
 	bcsr_init(bcsr1, bcsr2);
 
-	/* Not valid for Au1550 */
-#if defined(CONFIG_IRDA) && \
-   (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
 	{
 		u32 pin_func;
 
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index 7057d28..9e6b3d4 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -20,14 +20,16 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include "../platform.h"
 
+struct pci_dev;
+
 /* DB1xxx PCMCIA interrupt sources:
  * CD0/1 	GPIO0/3
  * STSCHG0/1	GPIO1/4
@@ -88,6 +90,155 @@
 #endif
 #endif
 
+#ifdef CONFIG_PCI
+#ifdef CONFIG_MIPS_DB1500
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTB;
+		case 2: return AU1550_PCI_INTC;
+		case 3: return AU1550_PCI_INTD;
+		case 4: return AU1550_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTA;
+		case 2: return AU1550_PCI_INTB;
+		case 3: return AU1550_PCI_INTC;
+		case 4: return AU1550_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 11) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		default: return 0xff;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1500_PCI_INTD : 0xff;
+	if (slot == 12)
+		return (pin == 3) ? AU1500_PCI_INTC : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		default: return 0xff;
+		}
+	}
+	return -1;
+}
+#endif
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1xxx_pci_pd = {
+	.board_map_irq	= db1xxx_map_pci_irq,
+};
+
+static struct platform_device db1xxx_pci_host_dev = {
+	.dev.platform_data = &db1xxx_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init db15x0_pci_init(void)
+{
+	return platform_device_register(&db1xxx_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db15x0_pci_init);
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+#endif
+
 static struct resource alchemy_ac97c_res[] = {
 	[0] = {
 		.start	= AU1000_AC97_PHYS_ADDR,
@@ -130,29 +281,28 @@
 static int __init db1xxx_dev_init(void)
 {
 #ifdef DB1XXX_HAS_PCMCIA
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    DB1XXX_PCMCIA_CARD0,
-				    DB1XXX_PCMCIA_CD0,
-				    /*DB1XXX_PCMCIA_STSCHG0*/0,
-				    0,
-				    0);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
+		/*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-				    DB1XXX_PCMCIA_CARD1,
-				    DB1XXX_PCMCIA_CD1,
-				    /*DB1XXX_PCMCIA_STSCHG1*/0,
-				    0,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
+		/*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
+#endif
+#ifdef CONFIG_MIPS_DB1100
+	platform_device_register(&au1100_lcd_device);
 #endif
 	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
 
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
index 2c8dc29..9c57c01 100644
--- a/arch/mips/alchemy/devboards/pb1100/platform.c
+++ b/arch/mips/alchemy/devboards/pb1100/platform.c
@@ -19,31 +19,58 @@
  */
 
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
 static int __init pb1100_dev_init(void)
 {
 	int swapped;
 
 	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1100_GPIO11_INT,	 /* card */
-				    AU1100_GPIO9_INT,	 /* insert */
-				    /*AU1100_GPIO10_INT*/0, /* stschg */
-				    0,			 /* eject */
-				    0);			 /* id */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
+		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
 	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&au1100_lcd_device);
 
 	return 0;
 }
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index 3ef2dce..54f7f7b 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -24,9 +24,11 @@
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-pb1x00/pb1200.h>
 
 #include "../platform.h"
 
@@ -88,7 +90,7 @@
 	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 }
 
-const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
 	[0] = {
 		.set_power	= pb1200mmc0_set_power,
 		.card_inserted	= pb1200mmc0_card_inserted,
@@ -105,6 +107,79 @@
 	},
 };
 
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct resource au1200_mmc0_res[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &pb1200mmc_platdata[0],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_res),
+	.resource	= au1200_mmc0_res,
+};
+
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &pb1200mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+
+
 static struct resource ide_resources[] = {
 	[0] = {
 		.start	= IDE_PHYS_ADDR,
@@ -115,7 +190,12 @@
 		.start	= IDE_INT,
 		.end	= IDE_INT,
 		.flags	= IORESOURCE_IRQ
-	}
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
 static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -161,38 +241,94 @@
 	.resource	= smc91c111_resources
 };
 
+static struct resource au1200_psc0_res[] = {
+	[0] = {
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC0_INT,
+		.end	= AU1200_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_TX,
+		.end	= AU1200_DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_PSC0_RX,
+		.end	= AU1200_DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device pb1200_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static struct resource au1200_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_LCD_INT,
+		.end	= AU1200_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1200_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
+	.resource	= au1200_lcd_res,
+};
+
 static struct platform_device *board_platform_devices[] __initdata = {
 	&ide_device,
-	&smc91c111_device
+	&smc91c111_device,
+	&pb1200_i2c_dev,
+	&pb1200_mmc0_dev,
+	&pb1200_mmc1_dev,
+	&au1200_lcd_dev,
 };
 
 static int __init board_register_devices(void)
 {
 	int swapped;
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    PB1200_PC0_INT,
-				    PB1200_PC0_INSERT_INT,
-				    /*PB1200_PC0_STSCHG_INT*/0,
-				    PB1200_PC0_EJECT_INT,
-				    0);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
+		/*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-				    PB1200_PC1_INT,
-				    PB1200_PC1_INSERT_INT,
-				    /*PB1200_PC1_STSCHG_INT*/0,
-				    PB1200_PC1_EJECT_INT,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+		PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
+		/*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 3b4fa32..37c1883 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -33,13 +33,6 @@
 
 #include <prom.h>
 
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD },   /* IDSEL 13 - PCI slot */
-};
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1500";
@@ -101,20 +94,18 @@
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 #ifdef CONFIG_PCI
-	/* Setup PCI bus controller */
-	au_writel(0, Au1500_PCI_CMEM);
-	au_writel(0x00003fff, Au1500_CFG_BASE);
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-	au_writel(0x00000008, Au1500_PCI_MBAR);
-	au_sync();
+	{
+		void __iomem *base =
+				(void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR);
+		/* Setup PCI bus controller */
+		__raw_writel(0x00003fff, base + PCI_REG_CMEM);
+		__raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV);
+		__raw_writel(0, base + PCI_REG_MWBASE_REV_CCL);
+		__raw_writel(0x02a00356, base + PCI_REG_STATCMD);
+		__raw_writel(0x00003c04, base + PCI_REG_PARAM);
+		__raw_writel(0x00000008, base + PCI_REG_MBAR);
+		wmb();
+	}
 #endif
 
 	/* Enable sys bus clock divider when IDLE state or no bus activity. */
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
index d443bc7..1e52a01 100644
--- a/arch/mips/alchemy/devboards/pb1500/platform.c
+++ b/arch/mips/alchemy/devboards/pb1500/platform.c
@@ -18,32 +18,77 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+	.board_map_irq	= pb1500_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+	.dev.platform_data = &pb1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
 static int __init pb1500_dev_init(void)
 {
 	int swapped;
 
-	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1500_GPIO11_INT,	 /* card */
-				    AU1500_GPIO9_INT,	 /* insert */
-				    /*AU1500_GPIO10_INT*/0, /* stschg */
-				    0,			 /* eject */
-				    0);			 /* id */
+	/* PCMCIA. single socket, identical to Pb1100 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
+		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
 
 	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
 	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1500_pci_host);
 
 	return 0;
 }
-device_initcall(pb1500_dev_init);
+arch_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b790213..0f62d1e 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -37,12 +37,6 @@
 
 #include <prom.h>
 
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1550";
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c
index d7150d0..a4604b8 100644
--- a/arch/mips/alchemy/devboards/pb1550/platform.c
+++ b/arch/mips/alchemy/devboards/pb1550/platform.c
@@ -18,14 +18,89 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
-
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-pb1x00/pb1550.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 #include "../platform.h"
 
+static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTB;
+		case 2: return AU1500_PCI_INTC;
+		case 3: return AU1500_PCI_INTD;
+		case 4: return AU1500_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1550_pci_pd = {
+	.board_map_irq	= pb1550_map_pci_irq,
+};
+
+static struct platform_device pb1550_pci_host = {
+	.dev.platform_data = &pb1550_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static struct resource au1550_psc2_res[] = {
+	[0] = {
+		.start	= AU1550_PSC2_PHYS_ADDR,
+		.end	= AU1550_PSC2_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC2_INT,
+		.end	= AU1550_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_TX,
+		.end	= AU1550_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_RX,
+		.end	= AU1550_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device pb1550_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc2_res),
+	.resource	= au1550_psc2_res,
+};
+
 static int __init pb1550_dev_init(void)
 {
 	int swapped;
@@ -37,33 +112,29 @@
 	* drivers are used to shared irqs and b) statuschange isn't really use-
 	* ful anyway.
 	*/
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR,
-				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-				    AU1550_GPIO201_205_INT,
-				    AU1550_GPIO0_INT,
-				    0,
-				    0,
-				    0);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0);
 
-	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-				    AU1550_GPIO201_205_INT,
-				    AU1550_GPIO1_INT,
-				    0,
-				    0,
-				    1);
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+		AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
 
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1550_pci_host);
+	platform_device_register(&pb1550_i2c_dev);
 
 	return 0;
 }
-device_initcall(pb1550_dev_init);
+arch_initcall(pb1550_dev_init);
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index 5f8f069..dea45c7 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,10 +36,6 @@
 
 #include <prom.h>
 
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
-};
-
 static void gpr_reset(char *c)
 {
 	/* switch System-LED to orange (red# and green# on) */
@@ -76,12 +72,4 @@
 
 	/* Take away Reset of UMTS-card */
 	alchemy_gpio_direction_output(215, 1);
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
 }
diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c
index 14b4662..982ce85 100644
--- a/arch/mips/alchemy/gpr/platform.c
+++ b/arch/mips/alchemy/gpr/platform.c
@@ -167,6 +167,45 @@
 	}
 };
 
+
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot == 0) && (pin == 1))
+		return AU1550_PCI_INTA;
+	else if ((slot == 0) && (pin == 2))
+		return AU1550_PCI_INTB;
+
+	return -1;
+}
+
+static struct alchemy_pci_platdata gpr_pci_pd = {
+	.board_map_irq	= gpr_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device gpr_pci_host_dev = {
+	.dev.platform_data = &gpr_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
 static struct platform_device *gpr_devices[] __initdata = {
 	&gpr_wdt_device,
 	&gpr_mtd_device,
@@ -174,6 +213,14 @@
 	&gpr_led_devices,
 };
 
+static int __init gpr_pci_init(void)
+{
+	return platform_device_register(&gpr_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(gpr_pci_init);
+
+
 static int __init gpr_dev_init(void)
 {
 	i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3ae984c..851a5ab 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -38,20 +38,6 @@
 
 #include <prom.h>
 
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
-
 static void mtx1_reset(char *c)
 {
 	/* Jump to the reset vector */
@@ -74,15 +60,6 @@
 	alchemy_gpio_direction_output(204, 0);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-	board_pci_idsel = mtx1_pci_idsel;
-#endif
-
 	/* Initialize sys_pinfunc */
 	au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
@@ -104,23 +81,6 @@
 	printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
-int
-mtx1_pci_idsel(unsigned int devsel, int assert)
-{
-	/* This function is only necessary to support a proprietary Cardbus
-	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
-	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
-	 */
-	if (assert && devsel != 0)
-		/* Suppress signal to Cardbus */
-		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
-	else
-		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
-
-	udelay(1);
-	return 1;
-}
-
 static int __init mtx1_init_irq(void)
 {
 	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 55628e3..cc47b68 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -135,7 +135,69 @@
 	.resource	= &mtx1_mtd_resource,
 };
 
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+	/* This function is only necessary to support a proprietary Cardbus
+	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+	 */
+	if (assert && devsel != 0)
+		/* Suppress signal to Cardbus */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+	else
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+
+	udelay(1);
+	return 1;
+}
+
+static const char mtx1_irqtab[][5] = {
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
+static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	return mtx1_irqtab[slot][pin];
+}
+
+static struct alchemy_pci_platdata mtx1_pci_pd = {
+	.board_map_irq	 = mtx1_map_pci_irq,
+	.board_pci_idsel = mtx1_pci_idsel,
+	.pci_cfg_set	 = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			   PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			   PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			   0,
+#endif
+};
+
+static struct platform_device mtx1_pci_host = {
+	.dev.platform_data = &mtx1_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+
 static struct __initdata platform_device * mtx1_devs[] = {
+	&mtx1_pci_host,
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
 	&mtx1_button,
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 81e57fa..3fa83f7 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -70,14 +70,6 @@
 	/* Enable DTR (MCR bit 0) = USB power up */
 	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
 	wmb();
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
-	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
-	au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
 }
 
 static int __init xxs1500_init_irq(void)
diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c
index e87c45c..06a3a45 100644
--- a/arch/mips/alchemy/xxs1500/platform.c
+++ b/arch/mips/alchemy/xxs1500/platform.c
@@ -27,20 +27,20 @@
 	{
 		.name	= "pcmcia-io",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_IO_PHYS_ADDR,
-		.end	= PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
 	},
 	{
 		.name	= "pcmcia-attr",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_ATTR_PHYS_ADDR,
-		.end	= PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 	},
 	{
 		.name	= "pcmcia-mem",
 		.flags	= IORESOURCE_MEM,
-		.start	= PCMCIA_MEM_PHYS_ADDR,
-		.end	= PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
 	},
 };
 
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index 57b425f..5ebdf62 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
  */
 
+#include <linux/export.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_driver_chipcommon.h>
 #include <linux/ssb/ssb_driver_extif.h>
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 17c3d14..1cfdda0 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -26,6 +26,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_embedded.h>
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 29d56af..ce6483a 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -7,6 +7,7 @@
  * Copyright (C) 2009, 2010 Cavium Networks, Inc.
  */
 #include <linux/clocksource.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 1abb66c..ea4feba 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -13,6 +13,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
 #include <linux/init.h>
diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c
index 0ee02f5..0a430e0 100644
--- a/arch/mips/cavium-octeon/flash_setup.c
+++ b/arch/mips/cavium-octeon/flash_setup.c
@@ -8,6 +8,7 @@
  * Copyright (C) 2007, 2008 Cavium Networks
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
@@ -16,8 +17,6 @@
 
 static struct map_info flash_map;
 static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
 static const char *part_probe_types[] = {
 	"cmdlinepart",
 #ifdef CONFIG_MTD_REDBOOT_PARTS
@@ -60,11 +59,8 @@
 		mymtd = do_map_probe("cfi_probe", &flash_map);
 		if (mymtd) {
 			mymtd->owner = THIS_MODULE;
-
-			nr_parts = parse_mtd_partitions(mymtd,
-							part_probe_types,
-							&parts, 0);
-			mtd_device_register(mymtd, parts, nr_parts);
+			mtd_device_parse_register(mymtd, part_probe_types,
+						  0, NULL, 0);
 		} else {
 			pr_err("Failed to register MTD device for flash\n");
 		}
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 8b60642..efcfff4 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -207,8 +207,9 @@
 	 * the other bits alone.
 	 */
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
-	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-			"SMP-IPI", mailbox_interrupt)) {
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+			mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
 }
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
index 708f087..cae4225 100644
--- a/arch/mips/emma/common/prom.c
+++ b/arch/mips/emma/common/prom.c
@@ -50,7 +50,7 @@
 
 	/* arg[0] is "g", the rest is boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
 		    >= sizeof(arcs_cmdline))
 			break;
 		strcat(arcs_cmdline, arg[i]);
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 40bb9fd..69468de 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -114,4 +114,28 @@
 extern void *kmap_coherent(struct page *page, unsigned long addr);
 extern void kunmap_coherent(void);
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	BUG_ON(cpu_has_dc_aliases && PageHighMem(page));
+}
+
+/*
+ * For now flush_kernel_vmap_range and invalidate_kernel_vmap_range both do a
+ * cache writeback and invalidate operation.
+ */
+extern void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+	if (cpu_has_dc_aliases)
+		__flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+	if (cpu_has_dc_aliases)
+		__flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
 #endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..2f7f418 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -135,6 +135,9 @@
 #define PRID_IMP_CAVIUM_CN50XX 0x0600
 #define PRID_IMP_CAVIUM_CN52XX 0x0700
 #define PRID_IMP_CAVIUM_CN63XX 0x9000
+#define PRID_IMP_CAVIUM_CN68XX 0x9100
+#define PRID_IMP_CAVIUM_CN66XX 0x9200
+#define PRID_IMP_CAVIUM_CN61XX 0x9300
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b04e4de..a58f229 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -329,14 +329,10 @@
 			"dsrl32	%L0, %L0, 0"			"\n\t"	\
 			"dsll32	%M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
-			".set	push"				"\n\t"	\
-			".set	noreorder"			"\n\t"	\
-			".set	nomacro"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
-			".set	pop"				"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__tmp)					\
-			: "0" (__val), "R" (*__mem));			\
+			: "0" (__val), "m" (*__mem));			\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else								\
@@ -359,16 +355,12 @@
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __readq"	"\n\t"	\
-			".set	push"				"\n\t"	\
-			".set	noreorder"			"\n\t"	\
-			".set	nomacro"			"\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
-			".set	pop"				"\n\t"	\
 			"dsra32	%M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
-			: "R" (*__mem));				\
+			: "m" (*__mem));				\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else {							\
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index f260ebe..de24ec57 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -245,6 +245,23 @@
 void alchemy_sleep_au1550(void);
 void au_sleep(void);
 
+/* USB: drivers/usb/host/alchemy-common.c */
+enum alchemy_usb_block {
+	ALCHEMY_USB_OHCI0,
+	ALCHEMY_USB_UDC0,
+	ALCHEMY_USB_EHCI0,
+	ALCHEMY_USB_OTG0,
+};
+int alchemy_usb_control(int block, int enable);
+
+/* PCI controller platform data */
+struct alchemy_pci_platdata {
+	int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+	int (*board_pci_idsel)(unsigned int devsel, int assert);
+	/* bits to set/clear in PCI_CONFIG register */
+	unsigned long pci_cfg_set;
+	unsigned long pci_cfg_clr;
+};
 
 /* SOC Interrupt numbers */
 
@@ -575,38 +592,95 @@
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
 /*
- * SDRAM register offsets
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
  */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
-    defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0		0x0000
-#define MEM_SDMODE1		0x0004
-#define MEM_SDMODE2		0x0008
-#define MEM_SDADDR0		0x000C
-#define MEM_SDADDR1		0x0010
-#define MEM_SDADDR2		0x0014
-#define MEM_SDREFCFG		0x0018
-#define MEM_SDPRECMD		0x001C
-#define MEM_SDAUTOREF		0x0020
-#define MEM_SDWRMD0		0x0024
-#define MEM_SDWRMD1		0x0028
-#define MEM_SDWRMD2		0x002C
-#define MEM_SDSLEEP		0x0030
-#define MEM_SDSMCKE		0x0034
 
-/*
- * MEM_SDMODE register content definitions
- */
+#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
+#define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
+#define AU1000_IRDA_PHYS_ADDR		0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR		0x10300000 /* 4 */
+#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
+#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 24 */
+#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
+#define AU1550_PSC2_PHYS_ADDR		0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR		0x10B00000 /* 3 */
+#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR		0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR		0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR		0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 01234 */
+#define AU1550_PSC0_PHYS_ADDR		0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR		0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR		0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR	0x14001000 /* 01234 */
+#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 34 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
+#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 4 */
+#define AU1500_PCI_PHYS_ADDR		0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR		0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR		0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR		0x14012000 /* 4 */
+#define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
+#define AU1100_LCD_PHYS_ADDR		0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 4 */
+#define AU1500_PCI_MEM_PHYS_ADDR	0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR		0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR	0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR	0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 01234 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 01234 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 01234 */
+
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0		0x0000
+#define AU1000_MEM_SDMODE1		0x0004
+#define AU1000_MEM_SDMODE2		0x0008
+#define AU1000_MEM_SDADDR0		0x000C
+#define AU1000_MEM_SDADDR1		0x0010
+#define AU1000_MEM_SDADDR2		0x0014
+#define AU1000_MEM_SDREFCFG		0x0018
+#define AU1000_MEM_SDPRECMD		0x001C
+#define AU1000_MEM_SDAUTOREF		0x0020
+#define AU1000_MEM_SDWRMD0		0x0024
+#define AU1000_MEM_SDWRMD1		0x0028
+#define AU1000_MEM_SDWRMD2		0x002C
+#define AU1000_MEM_SDSLEEP		0x0030
+#define AU1000_MEM_SDSMCKE		0x0034
+
+/* MEM_SDMODE register content definitions */
 #define MEM_SDMODE_F		(1 << 22)
 #define MEM_SDMODE_SR		(1 << 21)
 #define MEM_SDMODE_BS		(1 << 20)
 #define MEM_SDMODE_RS		(3 << 18)
 #define MEM_SDMODE_CS		(7 << 15)
-#define MEM_SDMODE_TRAS 	(15 << 11)
-#define MEM_SDMODE_TMRD 	(3 << 9)
+#define MEM_SDMODE_TRAS		(15 << 11)
+#define MEM_SDMODE_TMRD		(3 << 9)
 #define MEM_SDMODE_TWR		(3 << 7)
 #define MEM_SDMODE_TRP		(3 << 5)
-#define MEM_SDMODE_TRCD 	(3 << 3)
+#define MEM_SDMODE_TRCD		(3 << 3)
 #define MEM_SDMODE_TCL		(7 << 0)
 
 #define MEM_SDMODE_BS_2Bank	(0 << 20)
@@ -628,173 +702,43 @@
 #define MEM_SDMODE_TRCD_N(N)	((N) << 3)
 #define MEM_SDMODE_TCL_N(N)	((N) << 0)
 
-/*
- * MEM_SDADDR register contents definitions
- */
+/* MEM_SDADDR register contents definitions */
 #define MEM_SDADDR_E		(1 << 20)
-#define MEM_SDADDR_CSBA 	(0x03FF << 10)
+#define MEM_SDADDR_CSBA		(0x03FF << 10)
 #define MEM_SDADDR_CSMASK	(0x03FF << 0)
 #define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
 #define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
 
-/*
- * MEM_SDREFCFG register content definitions
- */
+/* MEM_SDREFCFG register content definitions */
 #define MEM_SDREFCFG_TRC	(15 << 28)
 #define MEM_SDREFCFG_TRPM	(3 << 26)
 #define MEM_SDREFCFG_E		(1 << 25)
-#define MEM_SDREFCFG_RE 	(0x1ffffff << 0)
+#define MEM_SDREFCFG_RE		(0x1ffffff << 0)
 #define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
 #define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
 #define MEM_SDREFCFG_REF_N(N)	(N)
-#endif
 
-/***********************************************************************/
-
-/*
- * Au1550 SDRAM Register Offsets
- */
-
-/***********************************************************************/
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0		0x0800
-#define MEM_SDMODE1		0x0808
-#define MEM_SDMODE2		0x0810
-#define MEM_SDADDR0		0x0820
-#define MEM_SDADDR1		0x0828
-#define MEM_SDADDR2		0x0830
-#define MEM_SDCONFIGA		0x0840
-#define MEM_SDCONFIGB		0x0848
-#define MEM_SDSTAT		0x0850
-#define MEM_SDERRADDR		0x0858
-#define MEM_SDSTRIDE0		0x0860
-#define MEM_SDSTRIDE1		0x0868
-#define MEM_SDSTRIDE2		0x0870
-#define MEM_SDWRMD0		0x0880
-#define MEM_SDWRMD1		0x0888
-#define MEM_SDWRMD2		0x0890
-#define MEM_SDPRECMD		0x08C0
-#define MEM_SDAUTOREF		0x08C8
-#define MEM_SDSREF		0x08D0
-#define MEM_SDSLEEP		MEM_SDSREF
-
-#endif
-
-/*
- * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
- */
-
-#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
-#define AU1000_USBD_PHYS_ADDR		0x10200000 /* 0123 */
-#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
-#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
-#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
-#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 24 */
-#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
-#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
-#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
-#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
-#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
-#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
-#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
-#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
-#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
-#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
-#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 01234 */
-#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 34 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
-#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
-#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
-
-
-#ifdef CONFIG_SOC_AU1000
-#define	MEM_PHYS_ADDR		0x14000000
-#define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
-#define	IRDA_PHYS_ADDR		0x10300000
-#define	SSI0_PHYS_ADDR		0x11600000
-#define	SSI1_PHYS_ADDR		0x11680000
-#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1500
-#define	MEM_PHYS_ADDR		0x14000000
-#define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
-#define PCI_PHYS_ADDR		0x14005000
-#define PCI_MEM_PHYS_ADDR	0x400000000ULL
-#define PCI_IO_PHYS_ADDR	0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1100
-#define	MEM_PHYS_ADDR		0x14000000
-#define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x10100000
-#define	IRDA_PHYS_ADDR		0x10300000
-#define	SSI0_PHYS_ADDR		0x11600000
-#define	SSI1_PHYS_ADDR		0x11680000
-#define LCD_PHYS_ADDR		0x15000000
-#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1550
-#define	MEM_PHYS_ADDR		0x14000000
-#define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	USBH_PHYS_ADDR		0x14020000
-#define PCI_PHYS_ADDR		0x14005000
-#define PE_PHYS_ADDR		0x14008000
-#define PSC0_PHYS_ADDR		0x11A00000
-#define PSC1_PHYS_ADDR		0x11B00000
-#define PSC2_PHYS_ADDR		0x10A00000
-#define PSC3_PHYS_ADDR		0x10B00000
-#define PCI_MEM_PHYS_ADDR	0x400000000ULL
-#define PCI_IO_PHYS_ADDR	0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR	0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1200
-#define	MEM_PHYS_ADDR		0x14000000
-#define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define AES_PHYS_ADDR		0x10300000
-#define CIM_PHYS_ADDR		0x14004000
-#define USBM_PHYS_ADDR		0x14020000
-#define	USBH_PHYS_ADDR		0x14020100
-#define PSC0_PHYS_ADDR	 	0x11A00000
-#define PSC1_PHYS_ADDR	 	0x11B00000
-#define LCD_PHYS_ADDR		0x15000000
-#define SWCNT_PHYS_ADDR		0x1110010C
-#define MAEFE_PHYS_ADDR		0x14012000
-#define MAEBE_PHYS_ADDR		0x14010000
-#define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
-#endif
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0		0x0800
+#define AU1550_MEM_SDMODE1		0x0808
+#define AU1550_MEM_SDMODE2		0x0810
+#define AU1550_MEM_SDADDR0		0x0820
+#define AU1550_MEM_SDADDR1		0x0828
+#define AU1550_MEM_SDADDR2		0x0830
+#define AU1550_MEM_SDCONFIGA		0x0840
+#define AU1550_MEM_SDCONFIGB		0x0848
+#define AU1550_MEM_SDSTAT		0x0850
+#define AU1550_MEM_SDERRADDR		0x0858
+#define AU1550_MEM_SDSTRIDE0		0x0860
+#define AU1550_MEM_SDSTRIDE1		0x0868
+#define AU1550_MEM_SDSTRIDE2		0x0870
+#define AU1550_MEM_SDWRMD0		0x0880
+#define AU1550_MEM_SDWRMD1		0x0888
+#define AU1550_MEM_SDWRMD2		0x0890
+#define AU1550_MEM_SDPRECMD		0x08C0
+#define AU1550_MEM_SDAUTOREF		0x08C8
+#define AU1550_MEM_SDSREF		0x08D0
+#define AU1550_MEM_SDSLEEP		MEM_SDSREF
 
 /* Static Bus Controller */
 #define MEM_STCFG0		0xB4001000
@@ -813,81 +757,14 @@
 #define MEM_STTIME3		0xB4001034
 #define MEM_STADDR3		0xB4001038
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
 #define MEM_STNDCTL		0xB4001100
 #define MEM_STSTAT		0xB4001104
 
 #define MEM_STNAND_CMD		0x0
 #define MEM_STNAND_ADDR 	0x4
 #define MEM_STNAND_DATA 	0x20
-#endif
 
 
-
-
-/* Au1000 */
-#ifdef CONFIG_SOC_AU1000
-
-#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
-#define USB_HOST_CONFIG 	0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1000 */
-
-/* Au1500 */
-#ifdef CONFIG_SOC_AU1500
-
-#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
-#define USB_HOST_CONFIG 	0xB017fffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1500 */
-
-/* Au1100 */
-#ifdef CONFIG_SOC_AU1100
-
-#define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
-#define USB_HOST_CONFIG 	0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1100 */
-
-#ifdef CONFIG_SOC_AU1550
-
-#define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
-#define USB_OHCI_LEN		0x00060000
-#define USB_HOST_CONFIG 	0xB4027ffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1550 */
-
-
-#ifdef CONFIG_SOC_AU1200
-
-#define USB_UOC_BASE		0x14020020
-#define USB_UOC_LEN		0x20
-#define USB_OHCI_BASE		0x14020100
-#define USB_OHCI_LEN		0x100
-#define USB_EHCI_BASE		0x14020200
-#define USB_EHCI_LEN		0x100
-#define USB_UDC_BASE		0x14022000
-#define USB_UDC_LEN		0x2000
-#define USB_MSR_BASE		0xB4020000
-#define USB_MSR_MCFG		4
-#define USBMSRMCFG_OMEMEN	0
-#define USBMSRMCFG_OBMEN	1
-#define USBMSRMCFG_EMEMEN	2
-#define USBMSRMCFG_EBMEN	3
-#define USBMSRMCFG_DMEMEN	4
-#define USBMSRMCFG_DBMEN	5
-#define USBMSRMCFG_GMEMEN	6
-#define USBMSRMCFG_OHCCLKEN	16
-#define USBMSRMCFG_EHCCLKEN	17
-#define USBMSRMCFG_UDCCLKEN	18
-#define USBMSRMCFG_PHYPLLEN	19
-#define USBMSRMCFG_RDCOMB	30
-#define USBMSRMCFG_PFEN 	31
-
-#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
-
-#endif /* CONFIG_SOC_AU1200 */
-
 /* Programmable Counters 0 and 1 */
 #define SYS_BASE		0xB1900000
 #define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
@@ -958,56 +835,6 @@
 #  define I2S_CONTROL_D 	(1 << 1)
 #  define I2S_CONTROL_CE	(1 << 0)
 
-/* USB Host Controller */
-#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN		0x00100000
-#endif
-
-#ifndef CONFIG_SOC_AU1200
-
-/* USB Device Controller */
-#define USBD_EP0RD		0xB0200000
-#define USBD_EP0WR		0xB0200004
-#define USBD_EP2WR		0xB0200008
-#define USBD_EP3WR		0xB020000C
-#define USBD_EP4RD		0xB0200010
-#define USBD_EP5RD		0xB0200014
-#define USBD_INTEN		0xB0200018
-#define USBD_INTSTAT		0xB020001C
-#  define USBDEV_INT_SOF	(1 << 12)
-#  define USBDEV_INT_HF_BIT	6
-#  define USBDEV_INT_HF_MASK	(0x3f << USBDEV_INT_HF_BIT)
-#  define USBDEV_INT_CMPLT_BIT	0
-#  define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG		0xB0200020
-#define USBD_EP0CS		0xB0200024
-#define USBD_EP2CS		0xB0200028
-#define USBD_EP3CS		0xB020002C
-#define USBD_EP4CS		0xB0200030
-#define USBD_EP5CS		0xB0200034
-#  define USBDEV_CS_SU		(1 << 14)
-#  define USBDEV_CS_NAK 	(1 << 13)
-#  define USBDEV_CS_ACK 	(1 << 12)
-#  define USBDEV_CS_BUSY	(1 << 11)
-#  define USBDEV_CS_TSIZE_BIT	1
-#  define USBDEV_CS_TSIZE_MASK	(0x3ff << USBDEV_CS_TSIZE_BIT)
-#  define USBDEV_CS_STALL	(1 << 0)
-#define USBD_EP0RDSTAT		0xB0200040
-#define USBD_EP0WRSTAT		0xB0200044
-#define USBD_EP2WRSTAT		0xB0200048
-#define USBD_EP3WRSTAT		0xB020004C
-#define USBD_EP4RDSTAT		0xB0200050
-#define USBD_EP5RDSTAT		0xB0200054
-#  define USBDEV_FSTAT_FLUSH	(1 << 6)
-#  define USBDEV_FSTAT_UF	(1 << 5)
-#  define USBDEV_FSTAT_OF	(1 << 4)
-#  define USBDEV_FSTAT_FCNT_BIT 0
-#  define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE		0xB0200058
-#  define USBDEV_ENABLE 	(1 << 1)
-#  define USBDEV_CE		(1 << 0)
-
-#endif /* !CONFIG_SOC_AU1200 */
 
 /* Ethernet Controllers  */
 
@@ -1322,7 +1149,6 @@
 #  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
 
 /* Au1200 only */
-#ifdef CONFIG_SOC_AU1200
 #define SYS_PINFUNC_DMA 	(1 << 31)
 #define SYS_PINFUNC_S0A 	(1 << 30)
 #define SYS_PINFUNC_S1A 	(1 << 29)
@@ -1350,7 +1176,6 @@
 #define SYS_PINFUNC_P0B 	(1 << 4)
 #define SYS_PINFUNC_U0T 	(1 << 3)
 #define SYS_PINFUNC_S1B 	(1 << 2)
-#endif
 
 /* Power Management */
 #define SYS_SCRATCH0		0xB1900018
@@ -1406,12 +1231,12 @@
 #  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
 #  define SYS_CS_DI2		(1 << 16)
 #  define SYS_CS_CI2		(1 << 15)
-#ifdef CONFIG_SOC_AU1100
+
 #  define SYS_CS_ML_BIT 	7
 #  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
 #  define SYS_CS_DL		(1 << 6)
 #  define SYS_CS_CL		(1 << 5)
-#else
+
 #  define SYS_CS_MUH_BIT	12
 #  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
 #  define SYS_CS_DUH		(1 << 11)
@@ -1420,7 +1245,7 @@
 #  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
 #  define SYS_CS_DUD		(1 << 6)
 #  define SYS_CS_CUD		(1 << 5)
-#endif
+
 #  define SYS_CS_MIR_BIT	2
 #  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
 #  define SYS_CS_DIR		(1 << 1)
@@ -1467,58 +1292,30 @@
 #  define AC97C_RS		(1 << 1)
 #  define AC97C_CE		(1 << 0)
 
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 	0xB4005000	/* virtual, KSEG1 addr */
-#define Au1500_PCI_CMEM 	(Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG		(Au1500_CFG_BASE + 4)
-#  define PCI_ERROR		((1 << 22) | (1 << 23) | (1 << 24) | \
-				 (1 << 25) | (1 << 26) | (1 << 27))
-#define Au1500_PCI_B2BMASK_CCH	(Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID	(Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID	(Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV	(Au1500_CFG_BASE + 0x14)
-#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR	(Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK	(Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID		(Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD	(Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV	(Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE	(Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR 	(Au1500_CFG_BASE + 0x110)
 
-#define Au1500_PCI_HDR		0xB4005100	/* virtual, KSEG1 addr */
-
-/*
- * All of our structures, like PCI resource, have 32-bit members.
- * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32-bit type.  We require a small patch
- * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
- * addresses.  For PCI I/O, it's simpler because we get to do the ioremap
- * ourselves and then adjust the device's resources.
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI.  When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
  */
-#define Au1500_EXT_CFG		0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1	0x680000000ULL
-#define Au1500_PCI_IO_START	0x500000000ULL
-#define Au1500_PCI_IO_END	0x5000FFFFFULL
-#define Au1500_PCI_MEM_START	0x440000000ULL
-#define Au1500_PCI_MEM_END	0x44FFFFFFFULL
+#define ALCHEMY_PCI_MEMWIN_START	(AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END		(ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
 
-#define PCI_IO_START	0x00001000
-#define PCI_IO_END	0x000FFFFF
-#define PCI_MEM_START	0x40000000
-#define PCI_MEM_END	0x4FFFFFFF
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START		0x00001000
+#define ALCHEMY_PCI_IOWIN_END		0x0000FFFF
 
-#define PCI_FIRST_DEVFN (0 << 3)
-#define PCI_LAST_DEVFN	(19 << 3)
+#ifdef CONFIG_PCI
 
 #define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
 #define IOMEM_RESOURCE_END	0xfffffffffULL
 
-#else /* Au1000 and Au1100 and Au1200 */
+#else
 
 /* Don't allow any legacy ports probing */
 #define IOPORT_RESOURCE_START	0x10000000
@@ -1526,13 +1323,77 @@
 #define IOMEM_RESOURCE_START	0x10000000
 #define IOMEM_RESOURCE_END	0xfffffffffULL
 
-#define PCI_IO_START	0
-#define PCI_IO_END	0
-#define PCI_MEM_START	0
-#define PCI_MEM_END	0
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN	0
-
 #endif
 
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM		0x0000
+#define PCI_REG_CONFIG		0x0004
+#define PCI_REG_B2BMASK_CCH	0x0008
+#define PCI_REG_B2BBASE0_VID	0x000C
+#define PCI_REG_B2BBASE1_SID	0x0010
+#define PCI_REG_MWMASK_DEV	0x0014
+#define PCI_REG_MWBASE_REV_CCL	0x0018
+#define PCI_REG_ERR_ADDR	0x001C
+#define PCI_REG_SPEC_INTACK	0x0020
+#define PCI_REG_ID		0x0100
+#define PCI_REG_STATCMD		0x0104
+#define PCI_REG_CLASSREV	0x0108
+#define PCI_REG_PARAM		0x010C
+#define PCI_REG_MBAR		0x0110
+#define PCI_REG_TIMEOUT		0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E		(1 << 28)	/* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x)	(((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x)	((x) & 0x3fff)
+#define PCI_CONFIG_ERD		(1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET		(1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF		(1 << 25) /* fatal error */
+#define PCI_CONFIG_EP		(1 << 24) /* parity error */
+#define PCI_CONFIG_EM		(1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM		(1 << 22) /* bad master error */
+#define PCI_CONFIG_PD		(1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME		(1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC		(1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA		(1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP		(1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS		(1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM		(1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM		(1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT		(1 << 9)  /* int on target abort (as target) */
+#define PCI_CONFIG_IPB		(1 << 8)  /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO	(0 << 6)  /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR	(1 << 6)  /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT	(2 << 6)  /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL	(3 << 6)  /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST		(1 << 5)  /* swap data by target transactions */
+#define PCI_CONFIG_SM		(1 << 4)  /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN		(1 << 3)  /* enable internal arbiter */
+#define PCI_CONFIG_R2H		(1 << 2)  /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H		(1 << 1)  /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH		(1 << 0)  /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x)	((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x)	((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x)	((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x)	((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x)  (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x)  ((x) & 0xff)
+#define PCI_ID_DID(x)		(((x) & 0xffff) << 16)
+#define PCI_ID_VID(x)		((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x)	(((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x)	((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x)	(((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x)	((x) & 0xff)
+#define PCI_PARAM_BIST(x)	(((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x)		(((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x)		(((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x)	((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x)	(((x) & 0xff) << 8)	/* max retries */
+#define PCI_TIMEOUT_TO(x)	((x) & 0xff)	/* target ready timeout */
+
 #endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
deleted file mode 100644
index 1b36550..0000000
--- a/arch/mips/include/asm/mach-au1x00/au1xxx.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _AU1XXX_H_
-#define _AU1XXX_H_
-
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
-    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-
-#elif defined(CONFIG_MIPS_PB1550)
-#include <asm/mach-pb1x00/pb1550.h>
-
-#elif defined(CONFIG_MIPS_PB1200)
-#include <asm/mach-pb1x00/pb1200.h>
-
-#elif defined(CONFIG_MIPS_DB1200)
-#include <asm/mach-db1x00/db1200.h>
-
-#endif
-
-#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 2fdacfe..323ce2d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -126,66 +126,62 @@
 #define SW_STATUS_INUSE 	(1 << 0)
 
 /* Command 0 device IDs. */
-#ifdef CONFIG_SOC_AU1550
-#define DSCR_CMD0_UART0_TX	0
-#define DSCR_CMD0_UART0_RX	1
-#define DSCR_CMD0_UART3_TX	2
-#define DSCR_CMD0_UART3_RX	3
-#define DSCR_CMD0_DMA_REQ0	4
-#define DSCR_CMD0_DMA_REQ1	5
-#define DSCR_CMD0_DMA_REQ2	6
-#define DSCR_CMD0_DMA_REQ3	7
-#define DSCR_CMD0_USBDEV_RX0	8
-#define DSCR_CMD0_USBDEV_TX0	9
-#define DSCR_CMD0_USBDEV_TX1	10
-#define DSCR_CMD0_USBDEV_TX2	11
-#define DSCR_CMD0_USBDEV_RX3	12
-#define DSCR_CMD0_USBDEV_RX4	13
-#define DSCR_CMD0_PSC0_TX	14
-#define DSCR_CMD0_PSC0_RX	15
-#define DSCR_CMD0_PSC1_TX	16
-#define DSCR_CMD0_PSC1_RX	17
-#define DSCR_CMD0_PSC2_TX	18
-#define DSCR_CMD0_PSC2_RX	19
-#define DSCR_CMD0_PSC3_TX	20
-#define DSCR_CMD0_PSC3_RX	21
-#define DSCR_CMD0_PCI_WRITE	22
-#define DSCR_CMD0_NAND_FLASH	23
-#define DSCR_CMD0_MAC0_RX	24
-#define DSCR_CMD0_MAC0_TX	25
-#define DSCR_CMD0_MAC1_RX	26
-#define DSCR_CMD0_MAC1_TX	27
-#endif /* CONFIG_SOC_AU1550 */
+#define AU1550_DSCR_CMD0_UART0_TX	0
+#define AU1550_DSCR_CMD0_UART0_RX	1
+#define AU1550_DSCR_CMD0_UART3_TX	2
+#define AU1550_DSCR_CMD0_UART3_RX	3
+#define AU1550_DSCR_CMD0_DMA_REQ0	4
+#define AU1550_DSCR_CMD0_DMA_REQ1	5
+#define AU1550_DSCR_CMD0_DMA_REQ2	6
+#define AU1550_DSCR_CMD0_DMA_REQ3	7
+#define AU1550_DSCR_CMD0_USBDEV_RX0	8
+#define AU1550_DSCR_CMD0_USBDEV_TX0	9
+#define AU1550_DSCR_CMD0_USBDEV_TX1	10
+#define AU1550_DSCR_CMD0_USBDEV_TX2	11
+#define AU1550_DSCR_CMD0_USBDEV_RX3	12
+#define AU1550_DSCR_CMD0_USBDEV_RX4	13
+#define AU1550_DSCR_CMD0_PSC0_TX	14
+#define AU1550_DSCR_CMD0_PSC0_RX	15
+#define AU1550_DSCR_CMD0_PSC1_TX	16
+#define AU1550_DSCR_CMD0_PSC1_RX	17
+#define AU1550_DSCR_CMD0_PSC2_TX	18
+#define AU1550_DSCR_CMD0_PSC2_RX	19
+#define AU1550_DSCR_CMD0_PSC3_TX	20
+#define AU1550_DSCR_CMD0_PSC3_RX	21
+#define AU1550_DSCR_CMD0_PCI_WRITE	22
+#define AU1550_DSCR_CMD0_NAND_FLASH	23
+#define AU1550_DSCR_CMD0_MAC0_RX	24
+#define AU1550_DSCR_CMD0_MAC0_TX	25
+#define AU1550_DSCR_CMD0_MAC1_RX	26
+#define AU1550_DSCR_CMD0_MAC1_TX	27
 
-#ifdef CONFIG_SOC_AU1200
-#define DSCR_CMD0_UART0_TX	0
-#define DSCR_CMD0_UART0_RX	1
-#define DSCR_CMD0_UART1_TX	2
-#define DSCR_CMD0_UART1_RX	3
-#define DSCR_CMD0_DMA_REQ0	4
-#define DSCR_CMD0_DMA_REQ1	5
-#define DSCR_CMD0_MAE_BE	6
-#define DSCR_CMD0_MAE_FE	7
-#define DSCR_CMD0_SDMS_TX0	8
-#define DSCR_CMD0_SDMS_RX0	9
-#define DSCR_CMD0_SDMS_TX1	10
-#define DSCR_CMD0_SDMS_RX1	11
-#define DSCR_CMD0_AES_TX	13
-#define DSCR_CMD0_AES_RX	12
-#define DSCR_CMD0_PSC0_TX	14
-#define DSCR_CMD0_PSC0_RX	15
-#define DSCR_CMD0_PSC1_TX	16
-#define DSCR_CMD0_PSC1_RX	17
-#define DSCR_CMD0_CIM_RXA	18
-#define DSCR_CMD0_CIM_RXB	19
-#define DSCR_CMD0_CIM_RXC	20
-#define DSCR_CMD0_MAE_BOTH	21
-#define DSCR_CMD0_LCD		22
-#define DSCR_CMD0_NAND_FLASH	23
-#define DSCR_CMD0_PSC0_SYNC	24
-#define DSCR_CMD0_PSC1_SYNC	25
-#define DSCR_CMD0_CIM_SYNC	26
-#endif /* CONFIG_SOC_AU1200 */
+#define AU1200_DSCR_CMD0_UART0_TX	0
+#define AU1200_DSCR_CMD0_UART0_RX	1
+#define AU1200_DSCR_CMD0_UART1_TX	2
+#define AU1200_DSCR_CMD0_UART1_RX	3
+#define AU1200_DSCR_CMD0_DMA_REQ0	4
+#define AU1200_DSCR_CMD0_DMA_REQ1	5
+#define AU1200_DSCR_CMD0_MAE_BE		6
+#define AU1200_DSCR_CMD0_MAE_FE		7
+#define AU1200_DSCR_CMD0_SDMS_TX0	8
+#define AU1200_DSCR_CMD0_SDMS_RX0	9
+#define AU1200_DSCR_CMD0_SDMS_TX1	10
+#define AU1200_DSCR_CMD0_SDMS_RX1	11
+#define AU1200_DSCR_CMD0_AES_TX		13
+#define AU1200_DSCR_CMD0_AES_RX		12
+#define AU1200_DSCR_CMD0_PSC0_TX	14
+#define AU1200_DSCR_CMD0_PSC0_RX	15
+#define AU1200_DSCR_CMD0_PSC1_TX	16
+#define AU1200_DSCR_CMD0_PSC1_RX	17
+#define AU1200_DSCR_CMD0_CIM_RXA	18
+#define AU1200_DSCR_CMD0_CIM_RXB	19
+#define AU1200_DSCR_CMD0_CIM_RXC	20
+#define AU1200_DSCR_CMD0_MAE_BOTH	21
+#define AU1200_DSCR_CMD0_LCD		22
+#define AU1200_DSCR_CMD0_NAND_FLASH	23
+#define AU1200_DSCR_CMD0_PSC0_SYNC	24
+#define AU1200_DSCR_CMD0_PSC1_SYNC	25
+#define AU1200_DSCR_CMD0_CIM_SYNC	26
 
 #define DSCR_CMD0_THROTTLE	30
 #define DSCR_CMD0_ALWAYS	31
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 5656c72..e306384 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -58,6 +58,7 @@
 #endif
 	int			irq;
 	u32			regbase;
+	int			ddma_id;
 } _auide_hwif;
 
 /******************************************************************************/
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
index 5a5cb73..4e3f3bc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -33,19 +33,6 @@
 #ifndef _AU1000_PSC_H_
 #define _AU1000_PSC_H_
 
-/* The PSC base addresses.  */
-#ifdef CONFIG_SOC_AU1550
-#define PSC0_BASE_ADDR		0xb1a00000
-#define PSC1_BASE_ADDR		0xb1b00000
-#define PSC2_BASE_ADDR		0xb0a00000
-#define PSC3_BASE_ADDR		0xb0b00000
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-#define PSC0_BASE_ADDR		0xb1a00000
-#define PSC1_BASE_ADDR		0xb1b00000
-#endif
-
 /*
  * The PSC select and control registers are common to all protocols.
  */
@@ -80,19 +67,6 @@
 #define PSC_AC97GPO_OFFSET	0x00000028
 #define PSC_AC97GPI_OFFSET	0x0000002c
 
-#define AC97_PSC_SEL		(AC97_PSC_BASE + PSC_SEL_OFFSET)
-#define AC97_PSC_CTRL		(AC97_PSC_BASE + PSC_CTRL_OFFSET)
-#define PSC_AC97CFG		(AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
-#define PSC_AC97MSK		(AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
-#define PSC_AC97PCR		(AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
-#define PSC_AC97STAT		(AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
-#define PSC_AC97EVNT		(AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
-#define PSC_AC97TXRX		(AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
-#define PSC_AC97CDC		(AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
-#define PSC_AC97RST		(AC97_PSC_BASE + PSC_AC97RST_OFFSET)
-#define PSC_AC97GPO		(AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
-#define PSC_AC97GPI		(AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-
 /* AC97 Config Register. */
 #define PSC_AC97CFG_RT_MASK	(3 << 30)
 #define PSC_AC97CFG_RT_FIFO1	(0 << 30)
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 1f41a52..73853b5a 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -347,17 +347,6 @@
 
 /**********************************************************************/
 
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
-	__raw_writel(0, base + SYS_PININPUTEN);	/* the write op is key */
-	wmb();
-}
-
 /* GPIO2 shared interrupts and control */
 
 static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
@@ -561,6 +550,7 @@
 
 #ifndef CONFIG_GPIOLIB
 
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
 
 #ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
 
@@ -665,24 +655,7 @@
 
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
-
-#else	/* CONFIG GPIOLIB */
-
-
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq	__gpio_to_irq
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define irq_to_gpio	alchemy_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
+#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1000 */
 
 #endif	/* !CONFIG_GPIOLIB */
 
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
index c3f60cd..fcdc8c4 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -1,10 +1,83 @@
+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ *  the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ *  appropriate CPU type (AU1000 currently).
+ */
+
 #ifndef _ALCHEMY_GPIO_H_
 #define _ALCHEMY_GPIO_H_
 
-#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
-
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 
-#endif
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + 0x110);		/* the write op is key */
+	wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+*	Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+*	A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+*	the boards' gpio.h must provide	the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+*	inlinable gpio functions are provided which enable access to the
+*	Au1300 gpios only by using the numbers straight out of the data-
+*	sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+		return alchemy_irq_to_gpio(irq);
+	}
+	return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq	__gpio_to_irq
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define irq_to_gpio	__au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif	/* CONFIG_GPIOLIB */
 
 #endif	/* _ALCHEMY_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 76961ca..2ef17e8 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -36,6 +36,8 @@
 	return -EINVAL;
 }
 
+#define gpio_get_value_cansleep	gpio_get_value
+
 static inline void gpio_set_value(unsigned gpio, int value)
 {
 	switch (bcm47xx_bus_type) {
@@ -54,6 +56,19 @@
 	}
 }
 
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+	return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
 static inline int gpio_direction_input(unsigned gpio)
 {
 	switch (bcm47xx_bus_type) {
@@ -137,7 +152,4 @@
 }
 
 
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
 #endif /* __BCM47XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 3404248..7a39657 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -46,8 +46,6 @@
 
 #define IDE_PHYS_ADDR		0x18800000
 #define IDE_REG_SHIFT		5
-#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE		128
 
 #define DB1200_IDE_PHYS_ADDR	IDE_PHYS_ADDR
 #define DB1200_IDE_PHYS_LEN	(16 << IDE_REG_SHIFT)
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index a919dac..a5affb0 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -31,15 +31,15 @@
 
 #ifdef CONFIG_MIPS_DB1550
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
 
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define AC97_PSC_BASE		PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
-#define I2S_PSC_BASE		PSC3_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
 
 #define NAND_PHYS_ADDR		0x20000000
 
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index fce4332..374416a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -28,23 +28,23 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_AC97_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	AU1200_DSCR_CMD0_PSC1_RX
 
 /*
  * SPI and SMB are muxed on the Pb1200 board.
  * Refer to board documentation.
  */
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC0_PHYS_ADDR
 /*
  * AC97 and I2S are muxed on the Pb1200 board.
  * Refer to board documentation.
  */
-#define AC97_PSC_BASE       PSC1_BASE_ADDR
-#define I2S_PSC_BASE	PSC1_BASE_ADDR
+#define AC97_PSC_BASE       AU1550_PSC1_PHYS_ADDR
+#define I2S_PSC_BASE	AU1550_PSC1_PHYS_ADDR
 
 
 #define BCSR_SYSTEM_VDDI	0x001F
@@ -76,8 +76,6 @@
 #define IDE_REG_SHIFT		5
 #define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
 #define IDE_INT 		PB1200_IDE_INT
-#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE		128
 
 #define NAND_PHYS_ADDR 	0x1C000000
 
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index f835c88..443b88a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
 #include <linux/types.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN	AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	AU1550_DSCR_CMD0_PSC3_RX
 
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define AC97_PSC_BASE		PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
-#define I2S_PSC_BASE		PSC3_BASE_ADDR
+#define SPI_PSC_BASE		AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE		AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE		AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE		AU1550_PSC3_PHYS_ADDR
 
 /*
  * Timing values as described in databook, * ns value stripped of
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
index 146d41b..e93943f 100644
--- a/arch/mips/include/asm/mipsprom.h
+++ b/arch/mips/include/asm/mipsprom.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_MIPSPROM_H
+#define __ASM_MIPSPROM_H
 
 #define PROM_RESET		0
 #define PROM_EXEC		1
@@ -73,4 +73,4 @@
 
 extern char *prom_getenv(char *);
 
-#endif /* __ASM_MIPS_PROM_H */
+#endif /* __ASM_MIPSPROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 6a6f8a8..2ea7b81 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1006,18 +1006,26 @@
 #define write_c0_perfctrl0(val)	__write_32bit_c0_register($25, 0, val)
 #define read_c0_perfcntr0()	__read_32bit_c0_register($25, 1)
 #define write_c0_perfcntr0(val)	__write_32bit_c0_register($25, 1, val)
+#define read_c0_perfcntr0_64()	__read_64bit_c0_register($25, 1)
+#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val)
 #define read_c0_perfctrl1()	__read_32bit_c0_register($25, 2)
 #define write_c0_perfctrl1(val)	__write_32bit_c0_register($25, 2, val)
 #define read_c0_perfcntr1()	__read_32bit_c0_register($25, 3)
 #define write_c0_perfcntr1(val)	__write_32bit_c0_register($25, 3, val)
+#define read_c0_perfcntr1_64()	__read_64bit_c0_register($25, 3)
+#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val)
 #define read_c0_perfctrl2()	__read_32bit_c0_register($25, 4)
 #define write_c0_perfctrl2(val)	__write_32bit_c0_register($25, 4, val)
 #define read_c0_perfcntr2()	__read_32bit_c0_register($25, 5)
 #define write_c0_perfcntr2(val)	__write_32bit_c0_register($25, 5, val)
+#define read_c0_perfcntr2_64()	__read_64bit_c0_register($25, 5)
+#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val)
 #define read_c0_perfctrl3()	__read_32bit_c0_register($25, 6)
 #define write_c0_perfctrl3(val)	__write_32bit_c0_register($25, 6, val)
 #define read_c0_perfcntr3()	__read_32bit_c0_register($25, 7)
 #define write_c0_perfcntr3(val)	__write_32bit_c0_register($25, 7, val)
+#define read_c0_perfcntr3_64()	__read_64bit_c0_register($25, 7)
+#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
 
 /* RM9000 PerfCount performance counter register */
 #define read_c0_perfcount()	__read_64bit_c0_register($25, 0)
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index 857d9b7..7a6e82e 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_PROM_H
+#define __ASM_PROM_H
 
 #ifdef CONFIG_OF
 #include <asm/bootinfo.h>
@@ -25,4 +25,4 @@
 static inline void device_tree_init(void) { }
 #endif /* CONFIG_OF */
 
-#endif /* _ASM_MIPS_PROM_H */
+#endif /* __ASM_PROM_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
index 7c8ecb6..785a518 100644
--- a/arch/mips/include/asm/regdef.h
+++ b/arch/mips/include/asm/regdef.h
@@ -6,6 +6,8 @@
  * Copyright (C) 1985 MIPS Computer Systems, Inc.
  * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
  * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2011 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #ifndef _ASM_REGDEF_H
 #define _ASM_REGDEF_H
@@ -30,9 +32,13 @@
 #define t2      $10
 #define t3      $11
 #define t4      $12
+#define ta0	$12
 #define t5      $13
+#define ta1	$13
 #define t6      $14
+#define ta2	$14
 #define t7      $15
+#define ta3	$15
 #define s0      $16     /* callee saved */
 #define s1      $17
 #define s2      $18
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index ecea787..d8dad53 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -365,16 +365,18 @@
 #define __NR_syncfs			(__NR_Linux + 342)
 #define __NR_sendmmsg			(__NR_Linux + 343)
 #define __NR_setns			(__NR_Linux + 344)
+#define __NR_process_vm_readv		(__NR_Linux + 345)
+#define __NR_process_vm_writev		(__NR_Linux + 346)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		344
+#define __NR_Linux_syscalls		346
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		344
+#define __NR_O32_Linux_syscalls		346
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -686,16 +688,18 @@
 #define __NR_syncfs			(__NR_Linux + 301)
 #define __NR_sendmmsg			(__NR_Linux + 302)
 #define __NR_setns			(__NR_Linux + 303)
+#define __NR_process_vm_readv		(__NR_Linux + 304)
+#define __NR_process_vm_writev		(__NR_Linux + 305)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		303
+#define __NR_Linux_syscalls		305
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		303
+#define __NR_64_Linux_syscalls		305
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1012,16 +1016,18 @@
 #define __NR_syncfs			(__NR_Linux + 306)
 #define __NR_sendmmsg			(__NR_Linux + 307)
 #define __NR_setns			(__NR_Linux + 308)
+#define __NR_process_vm_readv		(__NR_Linux + 309)
+#define __NR_process_vm_writev		(__NR_Linux + 310)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		308
+#define __NR_Linux_syscalls		310
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		308
+#define __NR_N32_Linux_syscalls		310
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 4397972..e1ddb95 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -17,8 +17,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -30,6 +28,8 @@
 
 #include <asm/mach-jz4740/base.h>
 
+#include "irq.h"
+
 #define JZ4740_GPIO_BASE_A (32*0)
 #define JZ4740_GPIO_BASE_B (32*1)
 #define JZ4740_GPIO_BASE_C (32*2)
@@ -77,14 +77,10 @@
 struct jz_gpio_chip {
 	unsigned int irq;
 	unsigned int irq_base;
-	uint32_t wakeup;
-	uint32_t suspend_mask;
 	uint32_t edge_trigger_both;
 
 	void __iomem *base;
 
-	spinlock_t lock;
-
 	struct gpio_chip gpio_chip;
 };
 
@@ -102,7 +98,8 @@
 
 static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
 {
-	return irq_data_get_irq_chip_data(data);
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	return gc->private;
 }
 
 static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
@@ -304,21 +301,15 @@
 {
 	uint32_t flag;
 	unsigned int gpio_irq;
-	unsigned int gpio_bank;
 	struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc);
 
-	gpio_bank = JZ4740_IRQ_GPIO0 - irq;
-
 	flag = readl(chip->base + JZ_REG_GPIO_FLAG);
-
 	if (!flag)
 		return;
 
-	gpio_irq = __fls(flag);
+	gpio_irq = chip->irq_base + __fls(flag);
 
-	jz_gpio_check_trigger_both(chip, irq);
-
-	gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0);
+	jz_gpio_check_trigger_both(chip, gpio_irq);
 
 	generic_handle_irq(gpio_irq);
 };
@@ -329,18 +320,12 @@
 	writel(IRQ_TO_BIT(data->irq), chip->base + reg);
 }
 
-static void jz_gpio_irq_mask(struct irq_data *data)
-{
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_SET);
-};
-
 static void jz_gpio_irq_unmask(struct irq_data *data)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
 
 	jz_gpio_check_trigger_both(chip, data->irq);
-
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_CLEAR);
+	irq_gc_unmask_enable_reg(data);
 };
 
 /* TODO: Check if function is gpio */
@@ -353,18 +338,13 @@
 
 static void jz_gpio_irq_shutdown(struct irq_data *data)
 {
-	jz_gpio_irq_mask(data);
+	irq_gc_mask_disable_reg(data);
 
 	/* Set direction to input */
 	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
 	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR);
 }
 
-static void jz_gpio_irq_ack(struct irq_data *data)
-{
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_FLAG_CLEAR);
-};
-
 static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
@@ -408,35 +388,13 @@
 static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
 {
 	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-	spin_lock(&chip->lock);
-	if (on)
-		chip->wakeup |= IRQ_TO_BIT(data->irq);
-	else
-		chip->wakeup &= ~IRQ_TO_BIT(data->irq);
-	spin_unlock(&chip->lock);
 
+	irq_gc_set_wake(data, on);
 	irq_set_irq_wake(chip->irq, on);
+
 	return 0;
 }
 
-static struct irq_chip jz_gpio_irq_chip = {
-	.name = "GPIO",
-	.irq_mask = jz_gpio_irq_mask,
-	.irq_unmask = jz_gpio_irq_unmask,
-	.irq_ack = jz_gpio_irq_ack,
-	.irq_startup = jz_gpio_irq_startup,
-	.irq_shutdown = jz_gpio_irq_shutdown,
-	.irq_set_type = jz_gpio_irq_set_type,
-	.irq_set_wake = jz_gpio_irq_set_wake,
-	.flags = IRQCHIP_SET_TYPE_MASKED,
-};
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
 #define JZ4740_GPIO_CHIP(_bank) { \
 	.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
 	.gpio_chip = { \
@@ -458,64 +416,44 @@
 	JZ4740_GPIO_CHIP(D),
 };
 
-static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
-{
-	chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
-	writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
-	writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-}
-
-static int jz4740_gpio_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
-		jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
-
-	return 0;
-}
-
-static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
-{
-	uint32_t mask = chip->suspend_mask;
-
-	writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-	writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-}
-
-static void jz4740_gpio_resume(void)
-{
-	int i;
-
-	for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
-		jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
-}
-
-static struct syscore_ops jz4740_gpio_syscore_ops = {
-	.suspend = jz4740_gpio_suspend,
-	.resume = jz4740_gpio_resume,
-};
-
 static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
 {
-	int irq;
-
-	spin_lock_init(&chip->lock);
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
 
 	chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
 
-	gpiochip_add(&chip->gpio_chip);
-
 	chip->irq = JZ4740_IRQ_INTC_GPIO(id);
 	irq_set_handler_data(chip->irq, chip);
 	irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
 
-	for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
-		irq_set_lockdep_class(irq, &gpio_lock_class);
-		irq_set_chip_data(irq, chip);
-		irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
-					 handle_level_irq);
-	}
+	gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base,
+		chip->base, handle_level_irq);
+
+	gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio);
+	gc->private = chip;
+
+	ct = gc->chip_types;
+	ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR;
+	ct->regs.disable = JZ_REG_GPIO_MASK_SET;
+	ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR;
+
+	ct->chip.name = "GPIO";
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_unmask = jz_gpio_irq_unmask;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_suspend = jz4740_irq_suspend;
+	ct->chip.irq_resume = jz4740_irq_resume;
+	ct->chip.irq_startup = jz_gpio_irq_startup;
+	ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
+	ct->chip.irq_set_type = jz_gpio_irq_set_type;
+	ct->chip.irq_set_wake = jz_gpio_irq_set_wake;
+	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
+		IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
+
+	gpiochip_add(&chip->gpio_chip);
 }
 
 static int __init jz4740_gpio_init(void)
@@ -525,8 +463,6 @@
 	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
 		jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
 
-	register_syscore_ops(&jz4740_gpio_syscore_ops);
-
 	printk(KERN_INFO "JZ4740 GPIO initialized\n");
 
 	return 0;
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
index d82c0c4..fc57ded 100644
--- a/arch/mips/jz4740/irq.c
+++ b/arch/mips/jz4740/irq.c
@@ -32,8 +32,6 @@
 #include <asm/mach-jz4740/base.h>
 
 static void __iomem *jz_intc_base;
-static uint32_t jz_intc_wakeup;
-static uint32_t jz_intc_saved;
 
 #define JZ_REG_INTC_STATUS	0x00
 #define JZ_REG_INTC_MASK	0x04
@@ -41,41 +39,6 @@
 #define JZ_REG_INTC_CLEAR_MASK	0x0c
 #define JZ_REG_INTC_PENDING	0x10
 
-#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE)
-
-static inline unsigned long intc_irq_bit(struct irq_data *data)
-{
-	return (unsigned long)irq_data_get_irq_chip_data(data);
-}
-
-static void intc_irq_unmask(struct irq_data *data)
-{
-	writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-static void intc_irq_mask(struct irq_data *data)
-{
-	writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
-static int intc_irq_set_wake(struct irq_data *data, unsigned int on)
-{
-	if (on)
-		jz_intc_wakeup |= intc_irq_bit(data);
-	else
-		jz_intc_wakeup &= ~intc_irq_bit(data);
-
-	return 0;
-}
-
-static struct irq_chip intc_irq_type = {
-	.name =		"INTC",
-	.irq_mask =	intc_irq_mask,
-	.irq_mask_ack =	intc_irq_mask,
-	.irq_unmask =	intc_irq_unmask,
-	.irq_set_wake =	intc_irq_set_wake,
-};
-
 static irqreturn_t jz4740_cascade(int irq, void *data)
 {
 	uint32_t irq_reg;
@@ -88,6 +51,26 @@
 	return IRQ_HANDLED;
 }
 
+static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
+{
+	struct irq_chip_regs *regs = &gc->chip_types->regs;
+
+	writel(mask, gc->reg_base + regs->enable);
+	writel(~mask, gc->reg_base + regs->disable);
+}
+
+void jz4740_irq_suspend(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	jz4740_irq_set_mask(gc, gc->wake_active);
+}
+
+void jz4740_irq_resume(struct irq_data *data)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	jz4740_irq_set_mask(gc, gc->mask_cache);
+}
+
 static struct irqaction jz4740_cascade_action = {
 	.handler = jz4740_cascade,
 	.name = "JZ4740 cascade interrupt",
@@ -95,7 +78,9 @@
 
 void __init arch_init_irq(void)
 {
-	int i;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
 	mips_cpu_irq_init();
 
 	jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
@@ -103,10 +88,22 @@
 	/* Mask all irqs */
 	writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK);
 
-	for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) {
-		irq_set_chip_data(i, (void *)IRQ_BIT(i));
-		irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-	}
+	gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base,
+		handle_level_irq);
+
+	gc->wake_enabled = IRQ_MSK(32);
+
+	ct = gc->chip_types;
+	ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
+	ct->regs.disable = JZ_REG_INTC_SET_MASK;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->chip.irq_suspend = jz4740_irq_suspend;
+	ct->chip.irq_resume = jz4740_irq_resume;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
 
 	setup_irq(2, &jz4740_cascade_action);
 }
@@ -122,19 +119,6 @@
 		spurious_interrupt();
 }
 
-void jz4740_intc_suspend(void)
-{
-	jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
-	writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
-	writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-void jz4740_intc_resume(void)
-{
-	writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-	writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
 #ifdef CONFIG_DEBUG_FS
 
 static inline void intc_seq_reg(struct seq_file *s, const char *name,
diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h
index 56b5ead..f75e39d 100644
--- a/arch/mips/jz4740/irq.h
+++ b/arch/mips/jz4740/irq.h
@@ -15,7 +15,9 @@
 #ifndef __MIPS_JZ4740_IRQ_H__
 #define __MIPS_JZ4740_IRQ_H__
 
-extern void jz4740_intc_suspend(void);
-extern void jz4740_intc_resume(void);
+#include <linux/irq.h>
+
+extern void jz4740_irq_suspend(struct irq_data *data);
+extern void jz4740_irq_resume(struct irq_data *data);
 
 #endif
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index 902d5b5..6744fa7 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -21,11 +21,9 @@
 #include <asm/mach-jz4740/clock.h>
 
 #include "clock.h"
-#include "irq.h"
 
 static int jz4740_pm_enter(suspend_state_t state)
 {
-	jz4740_intc_suspend();
 	jz4740_clock_suspend();
 
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
@@ -37,7 +35,6 @@
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
 
 	jz4740_clock_resume();
-	jz4740_intc_resume();
 
 	return 0;
 }
diff --git a/arch/mips/kernel/8250-platform.c b/arch/mips/kernel/8250-platform.c
index cbf3fe2..5c6b2ab 100644
--- a/arch/mips/kernel/8250-platform.c
+++ b/arch/mips/kernel/8250-platform.c
@@ -5,7 +5,6 @@
  *
  * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
  */
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 83bba33..1a96618 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,6 +11,8 @@
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
+CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
 endif
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
@@ -106,7 +108,8 @@
 
 obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
 
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 98c5a97..e2d8e19 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -103,19 +103,10 @@
 
 /*
  * Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register.  4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
  */
-
-#define compare_change_hazard() \
-	do { \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-	} while (0)
+#define COMPARE_INT_SEEN_TICKS 50
 
 int c0_compare_int_usable(void)
 {
@@ -126,8 +117,12 @@
 	 * IP7 already pending?  Try to clear it by acking the timer.
 	 */
 	if (c0_compare_int_pending()) {
-		write_c0_compare(read_c0_count());
-		compare_change_hazard();
+		cnt = read_c0_count();
+		write_c0_compare(cnt);
+		back_to_back_c0_hazard();
+		while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
+			if (!c0_compare_int_pending())
+				break;
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -136,7 +131,7 @@
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		compare_change_hazard();
+		back_to_back_c0_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -145,12 +140,17 @@
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
-	compare_change_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (c0_compare_int_pending())
+			break;
 	if (!c0_compare_int_pending())
 		return 0;
-
-	write_c0_compare(read_c0_count());
-	compare_change_hazard();
+	cnt = read_c0_count();
+	write_c0_compare(cnt);
+	back_to_back_c0_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (!c0_compare_int_pending())
+			break;
 	if (c0_compare_int_pending())
 		return 0;
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index ebc0cd2..c7d3cf1 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -16,7 +16,7 @@
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 #include <linux/stddef.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/bugs.h>
 #include <asm/cpu.h>
@@ -24,6 +24,7 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 #include <asm/watch.h>
+#include <asm/elf.h>
 #include <asm/spram.h>
 #include <asm/uaccess.h>
 
@@ -978,7 +979,10 @@
 platform:
 		set_elf_platform(cpu, "octeon");
 		break;
+	case PRID_IMP_CAVIUM_CN61XX:
 	case PRID_IMP_CAVIUM_CN63XX:
+	case PRID_IMP_CAVIUM_CN66XX:
+	case PRID_IMP_CAVIUM_CN68XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
 		set_elf_platform(cpu, "octeon2");
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c
index cefc6e2..5426779 100644
--- a/arch/mips/kernel/cpufreq/loongson2_clock.c
+++ b/arch/mips/kernel/cpufreq/loongson2_clock.c
@@ -7,6 +7,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index be4ee7d..7047bff 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -4,7 +4,7 @@
  */
 #include <linux/clockchips.h>
 #include <linux/i8253.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/smp.h>
 #include <linux/irq.h>
 
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index 6d6ca53..5f9a762 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -1,5 +1,5 @@
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/init_task.h>
 #include <linux/fs.h>
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 0c6afee..14ac52c 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -9,7 +9,6 @@
  *
  * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
  */
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index b53970d..7f50318 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
-#include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/mm.h>
 #include <linux/random.h>
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 594ca69..c23d11f 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -6,7 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/security.h>
 
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 1d04807..57ba13e 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -9,7 +9,7 @@
  * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
  */
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/checksum.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 4b930ac..a5066b1 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -28,7 +28,6 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/jump_label.h>
 
diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c
index 0aee944..c1cf9c6 100644
--- a/arch/mips/kernel/perf_event.c
+++ b/arch/mips/kernel/perf_event.c
@@ -14,533 +14,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
 #include <linux/perf_event.h>
-#include <linux/uaccess.h>
 
-#include <asm/irq.h>
-#include <asm/irq_regs.h>
 #include <asm/stacktrace.h>
-#include <asm/time.h> /* For perf_irq */
-
-/* These are for 32bit counters. For 64bit ones, define them accordingly. */
-#define MAX_PERIOD	((1ULL << 32) - 1)
-#define VALID_COUNT	0x7fffffff
-#define TOTAL_BITS	32
-#define HIGHEST_BIT	31
-
-#define MIPS_MAX_HWEVENTS 4
-
-struct cpu_hw_events {
-	/* Array of events on this cpu. */
-	struct perf_event	*events[MIPS_MAX_HWEVENTS];
-
-	/*
-	 * Set the bit (indexed by the counter number) when the counter
-	 * is used for an event.
-	 */
-	unsigned long		used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
-	/*
-	 * The borrowed MSB for the performance counter. A MIPS performance
-	 * counter uses its bit 31 (for 32bit counters) or bit 63 (for 64bit
-	 * counters) as a factor of determining whether a counter overflow
-	 * should be signaled. So here we use a separate MSB for each
-	 * counter to make things easy.
-	 */
-	unsigned long		msbs[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
-	/*
-	 * Software copy of the control register for each performance counter.
-	 * MIPS CPUs vary in performance counters. They use this differently,
-	 * and even may not use it.
-	 */
-	unsigned int		saved_ctrl[MIPS_MAX_HWEVENTS];
-};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
-	.saved_ctrl = {0},
-};
-
-/* The description of MIPS performance events. */
-struct mips_perf_event {
-	unsigned int event_id;
-	/*
-	 * MIPS performance counters are indexed starting from 0.
-	 * CNTR_EVEN indicates the indexes of the counters to be used are
-	 * even numbers.
-	 */
-	unsigned int cntr_mask;
-	#define CNTR_EVEN	0x55555555
-	#define CNTR_ODD	0xaaaaaaaa
-#ifdef CONFIG_MIPS_MT_SMP
-	enum {
-		T  = 0,
-		V  = 1,
-		P  = 2,
-	} range;
-#else
-	#define T
-	#define V
-	#define P
-#endif
-};
-
-static struct mips_perf_event raw_event;
-static DEFINE_MUTEX(raw_event_mutex);
-
-#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-struct mips_pmu {
-	const char	*name;
-	int		irq;
-	irqreturn_t	(*handle_irq)(int irq, void *dev);
-	int		(*handle_shared_irq)(void);
-	void		(*start)(void);
-	void		(*stop)(void);
-	int		(*alloc_counter)(struct cpu_hw_events *cpuc,
-					struct hw_perf_event *hwc);
-	u64		(*read_counter)(unsigned int idx);
-	void		(*write_counter)(unsigned int idx, u64 val);
-	void		(*enable_event)(struct hw_perf_event *evt, int idx);
-	void		(*disable_event)(int idx);
-	const struct mips_perf_event *(*map_raw_event)(u64 config);
-	const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
-	const struct mips_perf_event (*cache_event_map)
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX];
-	unsigned int	num_counters;
-};
-
-static const struct mips_pmu *mipspmu;
-
-static int
-mipspmu_event_set_period(struct perf_event *event,
-			struct hw_perf_event *hwc,
-			int idx)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	s64 left = local64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int ret = 0;
-	u64 uleft;
-	unsigned long flags;
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (left > (s64)MAX_PERIOD)
-		left = MAX_PERIOD;
-
-	local64_set(&hwc->prev_count, (u64)-left);
-
-	local_irq_save(flags);
-	uleft = (u64)(-left) & MAX_PERIOD;
-	uleft > VALID_COUNT ?
-		set_bit(idx, cpuc->msbs) : clear_bit(idx, cpuc->msbs);
-	mipspmu->write_counter(idx, (u64)(-left) & VALID_COUNT);
-	local_irq_restore(flags);
-
-	perf_event_update_userpage(event);
-
-	return ret;
-}
-
-static void mipspmu_event_update(struct perf_event *event,
-			struct hw_perf_event *hwc,
-			int idx)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	unsigned long flags;
-	int shift = 64 - TOTAL_BITS;
-	s64 prev_raw_count, new_raw_count;
-	u64 delta;
-
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	local_irq_save(flags);
-	/* Make the counter value be a "real" one. */
-	new_raw_count = mipspmu->read_counter(idx);
-	if (new_raw_count & (test_bit(idx, cpuc->msbs) << HIGHEST_BIT)) {
-		new_raw_count &= VALID_COUNT;
-		clear_bit(idx, cpuc->msbs);
-	} else
-		new_raw_count |= (test_bit(idx, cpuc->msbs) << HIGHEST_BIT);
-	local_irq_restore(flags);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-				new_raw_count) != prev_raw_count)
-		goto again;
-
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
-
-	local64_add(delta, &event->count);
-	local64_sub(delta, &hwc->period_left);
-}
-
-static void mipspmu_start(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (!mipspmu)
-		return;
-
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
-	hwc->state = 0;
-
-	/* Set the period for the event. */
-	mipspmu_event_set_period(event, hwc, hwc->idx);
-
-	/* Enable the event. */
-	mipspmu->enable_event(hwc, hwc->idx);
-}
-
-static void mipspmu_stop(struct perf_event *event, int flags)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (!mipspmu)
-		return;
-
-	if (!(hwc->state & PERF_HES_STOPPED)) {
-		/* We are working on a local event. */
-		mipspmu->disable_event(hwc->idx);
-		barrier();
-		mipspmu_event_update(event, hwc, hwc->idx);
-		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	}
-}
-
-static int mipspmu_add(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx;
-	int err = 0;
-
-	perf_pmu_disable(event->pmu);
-
-	/* To look for a free counter for this event. */
-	idx = mipspmu->alloc_counter(cpuc, hwc);
-	if (idx < 0) {
-		err = idx;
-		goto out;
-	}
-
-	/*
-	 * If there is an event in the counter we are going to use then
-	 * make sure it is disabled.
-	 */
-	event->hw.idx = idx;
-	mipspmu->disable_event(idx);
-	cpuc->events[idx] = event;
-
-	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	if (flags & PERF_EF_START)
-		mipspmu_start(event, PERF_EF_RELOAD);
-
-	/* Propagate our changes to the userspace mapping. */
-	perf_event_update_userpage(event);
-
-out:
-	perf_pmu_enable(event->pmu);
-	return err;
-}
-
-static void mipspmu_del(struct perf_event *event, int flags)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
-	mipspmu_stop(event, PERF_EF_UPDATE);
-	cpuc->events[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
-
-	perf_event_update_userpage(event);
-}
-
-static void mipspmu_read(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	/* Don't read disabled counters! */
-	if (hwc->idx < 0)
-		return;
-
-	mipspmu_event_update(event, hwc, hwc->idx);
-}
-
-static void mipspmu_enable(struct pmu *pmu)
-{
-	if (mipspmu)
-		mipspmu->start();
-}
-
-static void mipspmu_disable(struct pmu *pmu)
-{
-	if (mipspmu)
-		mipspmu->stop();
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-static int (*save_perf_irq)(void);
-
-static int mipspmu_get_irq(void)
-{
-	int err;
-
-	if (mipspmu->irq >= 0) {
-		/* Request my own irq handler. */
-		err = request_irq(mipspmu->irq, mipspmu->handle_irq,
-			IRQF_DISABLED | IRQF_NOBALANCING,
-			"mips_perf_pmu", NULL);
-		if (err) {
-			pr_warning("Unable to request IRQ%d for MIPS "
-			   "performance counters!\n", mipspmu->irq);
-		}
-	} else if (cp0_perfcount_irq < 0) {
-		/*
-		 * We are sharing the irq number with the timer interrupt.
-		 */
-		save_perf_irq = perf_irq;
-		perf_irq = mipspmu->handle_shared_irq;
-		err = 0;
-	} else {
-		pr_warning("The platform hasn't properly defined its "
-			"interrupt controller.\n");
-		err = -ENOENT;
-	}
-
-	return err;
-}
-
-static void mipspmu_free_irq(void)
-{
-	if (mipspmu->irq >= 0)
-		free_irq(mipspmu->irq, NULL);
-	else if (cp0_perfcount_irq < 0)
-		perf_irq = save_perf_irq;
-}
-
-/*
- * mipsxx/rm9000/loongson2 have different performance counters, they have
- * specific low-level init routines.
- */
-static void reset_counters(void *arg);
-static int __hw_perf_event_init(struct perf_event *event);
-
-static void hw_perf_event_destroy(struct perf_event *event)
-{
-	if (atomic_dec_and_mutex_lock(&active_events,
-				&pmu_reserve_mutex)) {
-		/*
-		 * We must not call the destroy function with interrupts
-		 * disabled.
-		 */
-		on_each_cpu(reset_counters,
-			(void *)(long)mipspmu->num_counters, 1);
-		mipspmu_free_irq();
-		mutex_unlock(&pmu_reserve_mutex);
-	}
-}
-
-static int mipspmu_event_init(struct perf_event *event)
-{
-	int err = 0;
-
-	switch (event->attr.type) {
-	case PERF_TYPE_RAW:
-	case PERF_TYPE_HARDWARE:
-	case PERF_TYPE_HW_CACHE:
-		break;
-
-	default:
-		return -ENOENT;
-	}
-
-	if (!mipspmu || event->cpu >= nr_cpumask_bits ||
-		(event->cpu >= 0 && !cpu_online(event->cpu)))
-		return -ENODEV;
-
-	if (!atomic_inc_not_zero(&active_events)) {
-		if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
-			atomic_dec(&active_events);
-			return -ENOSPC;
-		}
-
-		mutex_lock(&pmu_reserve_mutex);
-		if (atomic_read(&active_events) == 0)
-			err = mipspmu_get_irq();
-
-		if (!err)
-			atomic_inc(&active_events);
-		mutex_unlock(&pmu_reserve_mutex);
-	}
-
-	if (err)
-		return err;
-
-	err = __hw_perf_event_init(event);
-	if (err)
-		hw_perf_event_destroy(event);
-
-	return err;
-}
-
-static struct pmu pmu = {
-	.pmu_enable	= mipspmu_enable,
-	.pmu_disable	= mipspmu_disable,
-	.event_init	= mipspmu_event_init,
-	.add		= mipspmu_add,
-	.del		= mipspmu_del,
-	.start		= mipspmu_start,
-	.stop		= mipspmu_stop,
-	.read		= mipspmu_read,
-};
-
-static inline unsigned int
-mipspmu_perf_event_encode(const struct mips_perf_event *pev)
-{
-/*
- * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
- * event_id.
- */
-#ifdef CONFIG_MIPS_MT_SMP
-	return ((unsigned int)pev->range << 24) |
-		(pev->cntr_mask & 0xffff00) |
-		(pev->event_id & 0xff);
-#else
-	return (pev->cntr_mask & 0xffff00) |
-		(pev->event_id & 0xff);
-#endif
-}
-
-static const struct mips_perf_event *
-mipspmu_map_general_event(int idx)
-{
-	const struct mips_perf_event *pev;
-
-	pev = ((*mipspmu->general_event_map)[idx].event_id ==
-		UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
-		&(*mipspmu->general_event_map)[idx]);
-
-	return pev;
-}
-
-static const struct mips_perf_event *
-mipspmu_map_cache_event(u64 config)
-{
-	unsigned int cache_type, cache_op, cache_result;
-	const struct mips_perf_event *pev;
-
-	cache_type = (config >> 0) & 0xff;
-	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
-		return ERR_PTR(-EINVAL);
-
-	cache_op = (config >> 8) & 0xff;
-	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
-		return ERR_PTR(-EINVAL);
-
-	cache_result = (config >> 16) & 0xff;
-	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return ERR_PTR(-EINVAL);
-
-	pev = &((*mipspmu->cache_event_map)
-					[cache_type]
-					[cache_op]
-					[cache_result]);
-
-	if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
-		return ERR_PTR(-EOPNOTSUPP);
-
-	return pev;
-
-}
-
-static int validate_event(struct cpu_hw_events *cpuc,
-	       struct perf_event *event)
-{
-	struct hw_perf_event fake_hwc = event->hw;
-
-	/* Allow mixed event group. So return 1 to pass validation. */
-	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
-		return 1;
-
-	return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0;
-}
-
-static int validate_group(struct perf_event *event)
-{
-	struct perf_event *sibling, *leader = event->group_leader;
-	struct cpu_hw_events fake_cpuc;
-
-	memset(&fake_cpuc, 0, sizeof(fake_cpuc));
-
-	if (!validate_event(&fake_cpuc, leader))
-		return -ENOSPC;
-
-	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
-		if (!validate_event(&fake_cpuc, sibling))
-			return -ENOSPC;
-	}
-
-	if (!validate_event(&fake_cpuc, event))
-		return -ENOSPC;
-
-	return 0;
-}
-
-/* This is needed by specific irq handlers in perf_event_*.c */
-static void
-handle_associated_event(struct cpu_hw_events *cpuc,
-	int idx, struct perf_sample_data *data, struct pt_regs *regs)
-{
-	struct perf_event *event = cpuc->events[idx];
-	struct hw_perf_event *hwc = &event->hw;
-
-	mipspmu_event_update(event, hwc, idx);
-	data->period = event->hw.last_period;
-	if (!mipspmu_event_set_period(event, hwc, idx))
-		return;
-
-	if (perf_event_overflow(event, data, regs))
-		mipspmu->disable_event(idx);
-}
-
-#include "perf_event_mipsxx.c"
 
 /* Callchain handling code. */
 
 /*
  * Leave userspace callchain empty for now. When we find a way to trace
- * the user stack callchains, we add here.
+ * the user stack callchains, we will add it here.
  */
-void perf_callchain_user(struct perf_callchain_entry *entry,
-		    struct pt_regs *regs)
-{
-}
 
 static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
 	unsigned long reg29)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..4f2971b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1,13 +1,112 @@
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \
-    defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1)
+/*
+ * Linux performance counter support for MIPS.
+ *
+ * Copyright (C) 2010 MIPS Technologies, Inc.
+ * Copyright (C) 2011 Cavium Networks, Inc.
+ * Author: Deng-Cheng Zhu
+ *
+ * This code is based on the implementation for ARM, which is in turn
+ * based on the sparc64 perf event code and the x86 code. Performance
+ * counter access is based on the MIPS Oprofile code. And the callchain
+ * support references the code of MIPS stacktrace.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/stacktrace.h>
+#include <asm/time.h> /* For perf_irq */
+
+#define MIPS_MAX_HWEVENTS 4
+
+struct cpu_hw_events {
+	/* Array of events on this cpu. */
+	struct perf_event	*events[MIPS_MAX_HWEVENTS];
+
+	/*
+	 * Set the bit (indexed by the counter number) when the counter
+	 * is used for an event.
+	 */
+	unsigned long		used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
+
+	/*
+	 * Software copy of the control register for each performance counter.
+	 * MIPS CPUs vary in performance counters. They use this differently,
+	 * and even may not use it.
+	 */
+	unsigned int		saved_ctrl[MIPS_MAX_HWEVENTS];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+	.saved_ctrl = {0},
+};
+
+/* The description of MIPS performance events. */
+struct mips_perf_event {
+	unsigned int event_id;
+	/*
+	 * MIPS performance counters are indexed starting from 0.
+	 * CNTR_EVEN indicates the indexes of the counters to be used are
+	 * even numbers.
+	 */
+	unsigned int cntr_mask;
+	#define CNTR_EVEN	0x55555555
+	#define CNTR_ODD	0xaaaaaaaa
+	#define CNTR_ALL	0xffffffff
+#ifdef CONFIG_MIPS_MT_SMP
+	enum {
+		T  = 0,
+		V  = 1,
+		P  = 2,
+	} range;
+#else
+	#define T
+	#define V
+	#define P
+#endif
+};
+
+static struct mips_perf_event raw_event;
+static DEFINE_MUTEX(raw_event_mutex);
+
+#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+struct mips_pmu {
+	u64		max_period;
+	u64		valid_count;
+	u64		overflow;
+	const char	*name;
+	int		irq;
+	u64		(*read_counter)(unsigned int idx);
+	void		(*write_counter)(unsigned int idx, u64 val);
+	const struct mips_perf_event *(*map_raw_event)(u64 config);
+	const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
+	const struct mips_perf_event (*cache_event_map)
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX];
+	unsigned int	num_counters;
+};
+
+static struct mips_pmu mipspmu;
 
 #define M_CONFIG1_PC	(1 << 4)
 
-#define M_PERFCTL_EXL			(1UL      <<  0)
-#define M_PERFCTL_KERNEL		(1UL      <<  1)
-#define M_PERFCTL_SUPERVISOR		(1UL      <<  2)
-#define M_PERFCTL_USER			(1UL      <<  3)
-#define M_PERFCTL_INTERRUPT_ENABLE	(1UL      <<  4)
+#define M_PERFCTL_EXL			(1      <<  0)
+#define M_PERFCTL_KERNEL		(1      <<  1)
+#define M_PERFCTL_SUPERVISOR		(1      <<  2)
+#define M_PERFCTL_USER			(1      <<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1      <<  4)
 #define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
 #define M_PERFCTL_VPEID(vpe)		((vpe)    << 16)
 #define M_PERFCTL_MT_EN(filter)		((filter) << 20)
@@ -15,8 +114,8 @@
 #define    M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
 #define    M_TC_EN_TC			M_PERFCTL_MT_EN(2)
 #define M_PERFCTL_TCID(tcid)		((tcid)   << 22)
-#define M_PERFCTL_WIDE			(1UL      << 30)
-#define M_PERFCTL_MORE			(1UL      << 31)
+#define M_PERFCTL_WIDE			(1      << 30)
+#define M_PERFCTL_MORE			(1      << 31)
 
 #define M_PERFCTL_COUNT_EVENT_WHENEVER	(M_PERFCTL_EXL |		\
 					M_PERFCTL_KERNEL |		\
@@ -31,11 +130,12 @@
 #endif
 #define M_PERFCTL_EVENT_MASK		0xfe0
 
-#define M_COUNTER_OVERFLOW		(1UL      << 31)
 
 #ifdef CONFIG_MIPS_MT_SMP
 static int cpu_has_mipsmt_pertccounters;
 
+static DEFINE_RWLOCK(pmuint_rwlock);
+
 /*
  * FIXME: For VSMP, vpe_id() is redefined for Perf-events, because
  * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs.
@@ -49,79 +149,621 @@
 #endif
 
 /* Copied from op_model_mipsxx.c */
-static inline unsigned int vpe_shift(void)
+static unsigned int vpe_shift(void)
 {
 	if (num_possible_cpus() > 1)
 		return 1;
 
 	return 0;
 }
-#else /* !CONFIG_MIPS_MT_SMP */
-#define vpe_id()	0
 
-static inline unsigned int vpe_shift(void)
-{
-	return 0;
-}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-static inline unsigned int
-counters_total_to_per_cpu(unsigned int counters)
+static unsigned int counters_total_to_per_cpu(unsigned int counters)
 {
 	return counters >> vpe_shift();
 }
 
-static inline unsigned int
-counters_per_cpu_to_total(unsigned int counters)
+static unsigned int counters_per_cpu_to_total(unsigned int counters)
 {
 	return counters << vpe_shift();
 }
 
-#define __define_perf_accessors(r, n, np)				\
-									\
-static inline unsigned int r_c0_ ## r ## n(void)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		return read_c0_ ## r ## n();				\
-	case 1:								\
-		return read_c0_ ## r ## np();				\
-	default:							\
-		BUG();							\
-	}								\
-	return 0;							\
-}									\
-									\
-static inline void w_c0_ ## r ## n(unsigned int value)			\
-{									\
-	unsigned int cpu = vpe_id();					\
-									\
-	switch (cpu) {							\
-	case 0:								\
-		write_c0_ ## r ## n(value);				\
-		return;							\
-	case 1:								\
-		write_c0_ ## r ## np(value);				\
-		return;							\
-	default:							\
-		BUG();							\
-	}								\
-	return;								\
-}									\
+#else /* !CONFIG_MIPS_MT_SMP */
+#define vpe_id()	0
 
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
+#endif /* CONFIG_MIPS_MT_SMP */
 
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
+static void resume_local_counters(void);
+static void pause_local_counters(void);
+static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
+static int mipsxx_pmu_handle_shared_irq(void);
 
-static inline int __n_counters(void)
+static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
+{
+	if (vpe_id() == 1)
+		idx = (idx + 2) & 3;
+	return idx;
+}
+
+static u64 mipsxx_pmu_read_counter(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		/*
+		 * The counters are unsigned, we must cast to truncate
+		 * off the high bits.
+		 */
+		return (u32)read_c0_perfcntr0();
+	case 1:
+		return (u32)read_c0_perfcntr1();
+	case 2:
+		return (u32)read_c0_perfcntr2();
+	case 3:
+		return (u32)read_c0_perfcntr3();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		return read_c0_perfcntr0_64();
+	case 1:
+		return read_c0_perfcntr1_64();
+	case 2:
+		return read_c0_perfcntr2_64();
+	case 3:
+		return read_c0_perfcntr3_64();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfcntr0(val);
+		return;
+	case 1:
+		write_c0_perfcntr1(val);
+		return;
+	case 2:
+		write_c0_perfcntr2(val);
+		return;
+	case 3:
+		write_c0_perfcntr3(val);
+		return;
+	}
+}
+
+static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfcntr0_64(val);
+		return;
+	case 1:
+		write_c0_perfcntr1_64(val);
+		return;
+	case 2:
+		write_c0_perfcntr2_64(val);
+		return;
+	case 3:
+		write_c0_perfcntr3_64(val);
+		return;
+	}
+}
+
+static unsigned int mipsxx_pmu_read_control(unsigned int idx)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		return read_c0_perfctrl0();
+	case 1:
+		return read_c0_perfctrl1();
+	case 2:
+		return read_c0_perfctrl2();
+	case 3:
+		return read_c0_perfctrl3();
+	default:
+		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+		return 0;
+	}
+}
+
+static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
+{
+	idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+	switch (idx) {
+	case 0:
+		write_c0_perfctrl0(val);
+		return;
+	case 1:
+		write_c0_perfctrl1(val);
+		return;
+	case 2:
+		write_c0_perfctrl2(val);
+		return;
+	case 3:
+		write_c0_perfctrl3(val);
+		return;
+	}
+}
+
+static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
+				    struct hw_perf_event *hwc)
+{
+	int i;
+
+	/*
+	 * We only need to care the counter mask. The range has been
+	 * checked definitely.
+	 */
+	unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
+
+	for (i = mipspmu.num_counters - 1; i >= 0; i--) {
+		/*
+		 * Note that some MIPS perf events can be counted by both
+		 * even and odd counters, wheresas many other are only by
+		 * even _or_ odd counters. This introduces an issue that
+		 * when the former kind of event takes the counter the
+		 * latter kind of event wants to use, then the "counter
+		 * allocation" for the latter event will fail. In fact if
+		 * they can be dynamically swapped, they both feel happy.
+		 * But here we leave this issue alone for now.
+		 */
+		if (test_bit(i, &cntr_mask) &&
+			!test_and_set_bit(i, cpuc->used_mask))
+			return i;
+	}
+
+	return -EAGAIN;
+}
+
+static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+		(evt->config_base & M_PERFCTL_CONFIG_MASK) |
+		/* Make sure interrupt enabled. */
+		M_PERFCTL_INTERRUPT_ENABLE;
+	/*
+	 * We do not actually let the counter run. Leave it until start().
+	 */
+}
+
+static void mipsxx_pmu_disable_event(int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	unsigned long flags;
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	local_irq_save(flags);
+	cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
+		~M_PERFCTL_COUNT_EVENT_WHENEVER;
+	mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
+	local_irq_restore(flags);
+}
+
+static int mipspmu_event_set_period(struct perf_event *event,
+				    struct hw_perf_event *hwc,
+				    int idx)
+{
+	u64 left = local64_read(&hwc->period_left);
+	u64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely((left + period) & (1ULL << 63))) {
+		/* left underflowed by more than period. */
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	} else	if (unlikely((left + period) <= period)) {
+		/* left underflowed by less than period. */
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (left > mipspmu.max_period) {
+		left = mipspmu.max_period;
+		local64_set(&hwc->period_left, left);
+	}
+
+	local64_set(&hwc->prev_count, mipspmu.overflow - left);
+
+	mipspmu.write_counter(idx, mipspmu.overflow - left);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static void mipspmu_event_update(struct perf_event *event,
+				 struct hw_perf_event *hwc,
+				 int idx)
+{
+	u64 prev_raw_count, new_raw_count;
+	u64 delta;
+
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = mipspmu.read_counter(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+				new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = new_raw_count - prev_raw_count;
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+}
+
+static void mipspmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+	hwc->state = 0;
+
+	/* Set the period for the event. */
+	mipspmu_event_set_period(event, hwc, hwc->idx);
+
+	/* Enable the event. */
+	mipsxx_pmu_enable_event(hwc, hwc->idx);
+}
+
+static void mipspmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		/* We are working on a local event. */
+		mipsxx_pmu_disable_event(hwc->idx);
+		barrier();
+		mipspmu_event_update(event, hwc, hwc->idx);
+		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	}
+}
+
+static int mipspmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+	int err = 0;
+
+	perf_pmu_disable(event->pmu);
+
+	/* To look for a free counter for this event. */
+	idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
+	if (idx < 0) {
+		err = idx;
+		goto out;
+	}
+
+	/*
+	 * If there is an event in the counter we are going to use then
+	 * make sure it is disabled.
+	 */
+	event->hw.idx = idx;
+	mipsxx_pmu_disable_event(idx);
+	cpuc->events[idx] = event;
+
+	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	if (flags & PERF_EF_START)
+		mipspmu_start(event, PERF_EF_RELOAD);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+out:
+	perf_pmu_enable(event->pmu);
+	return err;
+}
+
+static void mipspmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+	mipspmu_stop(event, PERF_EF_UPDATE);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static void mipspmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
+
+	mipspmu_event_update(event, hwc, hwc->idx);
+}
+
+static void mipspmu_enable(struct pmu *pmu)
+{
+#ifdef CONFIG_MIPS_MT_SMP
+	write_unlock(&pmuint_rwlock);
+#endif
+	resume_local_counters();
+}
+
+/*
+ * MIPS performance counters can be per-TC. The control registers can
+ * not be directly accessed accross CPUs. Hence if we want to do global
+ * control, we need cross CPU calls. on_each_cpu() can help us, but we
+ * can not make sure this function is called with interrupts enabled. So
+ * here we pause local counters and then grab a rwlock and leave the
+ * counters on other CPUs alone. If any counter interrupt raises while
+ * we own the write lock, simply pause local counters on that CPU and
+ * spin in the handler. Also we know we won't be switched to another
+ * CPU after pausing local counters and before grabbing the lock.
+ */
+static void mipspmu_disable(struct pmu *pmu)
+{
+	pause_local_counters();
+#ifdef CONFIG_MIPS_MT_SMP
+	write_lock(&pmuint_rwlock);
+#endif
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+static int (*save_perf_irq)(void);
+
+static int mipspmu_get_irq(void)
+{
+	int err;
+
+	if (mipspmu.irq >= 0) {
+		/* Request my own irq handler. */
+		err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
+			IRQF_PERCPU | IRQF_NOBALANCING,
+			"mips_perf_pmu", NULL);
+		if (err) {
+			pr_warning("Unable to request IRQ%d for MIPS "
+			   "performance counters!\n", mipspmu.irq);
+		}
+	} else if (cp0_perfcount_irq < 0) {
+		/*
+		 * We are sharing the irq number with the timer interrupt.
+		 */
+		save_perf_irq = perf_irq;
+		perf_irq = mipsxx_pmu_handle_shared_irq;
+		err = 0;
+	} else {
+		pr_warning("The platform hasn't properly defined its "
+			"interrupt controller.\n");
+		err = -ENOENT;
+	}
+
+	return err;
+}
+
+static void mipspmu_free_irq(void)
+{
+	if (mipspmu.irq >= 0)
+		free_irq(mipspmu.irq, NULL);
+	else if (cp0_perfcount_irq < 0)
+		perf_irq = save_perf_irq;
+}
+
+/*
+ * mipsxx/rm9000/loongson2 have different performance counters, they have
+ * specific low-level init routines.
+ */
+static void reset_counters(void *arg);
+static int __hw_perf_event_init(struct perf_event *event);
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (atomic_dec_and_mutex_lock(&active_events,
+				&pmu_reserve_mutex)) {
+		/*
+		 * We must not call the destroy function with interrupts
+		 * disabled.
+		 */
+		on_each_cpu(reset_counters,
+			(void *)(long)mipspmu.num_counters, 1);
+		mipspmu_free_irq();
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+}
+
+static int mipspmu_event_init(struct perf_event *event)
+{
+	int err = 0;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
+	if (event->cpu >= nr_cpumask_bits ||
+	    (event->cpu >= 0 && !cpu_online(event->cpu)))
+		return -ENODEV;
+
+	if (!atomic_inc_not_zero(&active_events)) {
+		if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
+			atomic_dec(&active_events);
+			return -ENOSPC;
+		}
+
+		mutex_lock(&pmu_reserve_mutex);
+		if (atomic_read(&active_events) == 0)
+			err = mipspmu_get_irq();
+
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+
+	if (err)
+		return err;
+
+	err = __hw_perf_event_init(event);
+	if (err)
+		hw_perf_event_destroy(event);
+
+	return err;
+}
+
+static struct pmu pmu = {
+	.pmu_enable	= mipspmu_enable,
+	.pmu_disable	= mipspmu_disable,
+	.event_init	= mipspmu_event_init,
+	.add		= mipspmu_add,
+	.del		= mipspmu_del,
+	.start		= mipspmu_start,
+	.stop		= mipspmu_stop,
+	.read		= mipspmu_read,
+};
+
+static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
+{
+/*
+ * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
+ * event_id.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+	return ((unsigned int)pev->range << 24) |
+		(pev->cntr_mask & 0xffff00) |
+		(pev->event_id & 0xff);
+#else
+	return (pev->cntr_mask & 0xffff00) |
+		(pev->event_id & 0xff);
+#endif
+}
+
+static const struct mips_perf_event *mipspmu_map_general_event(int idx)
+{
+	const struct mips_perf_event *pev;
+
+	pev = ((*mipspmu.general_event_map)[idx].event_id ==
+		UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
+		&(*mipspmu.general_event_map)[idx]);
+
+	return pev;
+}
+
+static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	const struct mips_perf_event *pev;
+
+	cache_type = (config >> 0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_op = (config >> 8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return ERR_PTR(-EINVAL);
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return ERR_PTR(-EINVAL);
+
+	pev = &((*mipspmu.cache_event_map)
+					[cache_type]
+					[cache_op]
+					[cache_result]);
+
+	if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
+		return ERR_PTR(-EOPNOTSUPP);
+
+	return pev;
+
+}
+
+static int validate_event(struct cpu_hw_events *cpuc,
+	       struct perf_event *event)
+{
+	struct hw_perf_event fake_hwc = event->hw;
+
+	/* Allow mixed event group. So return 1 to pass validation. */
+	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
+
+	return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0;
+}
+
+static int validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_cpuc;
+
+	memset(&fake_cpuc, 0, sizeof(fake_cpuc));
+
+	if (!validate_event(&fake_cpuc, leader))
+		return -ENOSPC;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_cpuc, sibling))
+			return -ENOSPC;
+	}
+
+	if (!validate_event(&fake_cpuc, event))
+		return -ENOSPC;
+
+	return 0;
+}
+
+/* This is needed by specific irq handlers in perf_event_*.c */
+static void handle_associated_event(struct cpu_hw_events *cpuc,
+				    int idx, struct perf_sample_data *data,
+				    struct pt_regs *regs)
+{
+	struct perf_event *event = cpuc->events[idx];
+	struct hw_perf_event *hwc = &event->hw;
+
+	mipspmu_event_update(event, hwc, idx);
+	data->period = event->hw.last_period;
+	if (!mipspmu_event_set_period(event, hwc, idx))
+		return;
+
+	if (perf_event_overflow(event, data, regs))
+		mipsxx_pmu_disable_event(idx);
+}
+
+
+static int __n_counters(void)
 {
 	if (!(read_c0_config1() & M_CONFIG1_PC))
 		return 0;
@@ -135,7 +777,7 @@
 	return 4;
 }
 
-static inline int n_counters(void)
+static int n_counters(void)
 {
 	int counters;
 
@@ -161,98 +803,20 @@
 	int counters = (int)(long)arg;
 	switch (counters) {
 	case 4:
-		w_c0_perfctrl3(0);
-		w_c0_perfcntr3(0);
+		mipsxx_pmu_write_control(3, 0);
+		mipspmu.write_counter(3, 0);
 	case 3:
-		w_c0_perfctrl2(0);
-		w_c0_perfcntr2(0);
+		mipsxx_pmu_write_control(2, 0);
+		mipspmu.write_counter(2, 0);
 	case 2:
-		w_c0_perfctrl1(0);
-		w_c0_perfcntr1(0);
+		mipsxx_pmu_write_control(1, 0);
+		mipspmu.write_counter(1, 0);
 	case 1:
-		w_c0_perfctrl0(0);
-		w_c0_perfcntr0(0);
+		mipsxx_pmu_write_control(0, 0);
+		mipspmu.write_counter(0, 0);
 	}
 }
 
-static inline u64
-mipsxx_pmu_read_counter(unsigned int idx)
-{
-	switch (idx) {
-	case 0:
-		return r_c0_perfcntr0();
-	case 1:
-		return r_c0_perfcntr1();
-	case 2:
-		return r_c0_perfcntr2();
-	case 3:
-		return r_c0_perfcntr3();
-	default:
-		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
-		return 0;
-	}
-}
-
-static inline void
-mipsxx_pmu_write_counter(unsigned int idx, u64 val)
-{
-	switch (idx) {
-	case 0:
-		w_c0_perfcntr0(val);
-		return;
-	case 1:
-		w_c0_perfcntr1(val);
-		return;
-	case 2:
-		w_c0_perfcntr2(val);
-		return;
-	case 3:
-		w_c0_perfcntr3(val);
-		return;
-	}
-}
-
-static inline unsigned int
-mipsxx_pmu_read_control(unsigned int idx)
-{
-	switch (idx) {
-	case 0:
-		return r_c0_perfctrl0();
-	case 1:
-		return r_c0_perfctrl1();
-	case 2:
-		return r_c0_perfctrl2();
-	case 3:
-		return r_c0_perfctrl3();
-	default:
-		WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
-		return 0;
-	}
-}
-
-static inline void
-mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
-{
-	switch (idx) {
-	case 0:
-		w_c0_perfctrl0(val);
-		return;
-	case 1:
-		w_c0_perfctrl1(val);
-		return;
-	case 2:
-		w_c0_perfctrl2(val);
-		return;
-	case 3:
-		w_c0_perfctrl3(val);
-		return;
-	}
-}
-
-#ifdef CONFIG_MIPS_MT_SMP
-static DEFINE_RWLOCK(pmuint_rwlock);
-#endif
-
 /* 24K/34K/1004K cores can share the same event map. */
 static const struct mips_perf_event mipsxxcore_event_map
 				[PERF_COUNT_HW_MAX] = {
@@ -277,6 +841,16 @@
 	[PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID },
 };
 
+static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL  },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
+	[PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
+};
+
 /* 24K/34K/1004K cores can share the same cache event map. */
 static const struct mips_perf_event mipsxxcore_cache_map
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -510,10 +1084,105 @@
 },
 };
 
+
+static const struct mips_perf_event octeon_cache_map
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x2b, CNTR_ALL },
+		[C(RESULT_MISS)]	= { 0x2e, CNTR_ALL },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { 0x30, CNTR_ALL },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+[C(L1I)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { 0x18, CNTR_ALL },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { 0x19, CNTR_ALL },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+[C(LL)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+[C(DTLB)] = {
+	/*
+	 * Only general DTLB misses are counted use the same event for
+	 * read and write.
+	 */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { 0x35, CNTR_ALL },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { 0x35, CNTR_ALL },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+[C(ITLB)] = {
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { 0x37, CNTR_ALL },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+[C(BPU)] = {
+	/* Using the same code for *HW_BRANCH* */
+	[C(OP_READ)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_WRITE)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+	[C(OP_PREFETCH)] = {
+		[C(RESULT_ACCESS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+		[C(RESULT_MISS)]	= { UNSUPPORTED_PERF_EVENT_ID },
+	},
+},
+};
+
 #ifdef CONFIG_MIPS_MT_SMP
-static void
-check_and_calc_range(struct perf_event *event,
-			const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+				 const struct mips_perf_event *pev)
 {
 	struct hw_perf_event *hwc = &event->hw;
 
@@ -536,9 +1205,8 @@
 		hwc->config_base |= M_TC_EN_ALL;
 }
 #else
-static void
-check_and_calc_range(struct perf_event *event,
-			const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+				 const struct mips_perf_event *pev)
 {
 }
 #endif
@@ -560,7 +1228,7 @@
 	} else if (PERF_TYPE_RAW == event->attr.type) {
 		/* We are working on the global raw event. */
 		mutex_lock(&raw_event_mutex);
-		pev = mipspmu->map_raw_event(event->attr.config);
+		pev = mipspmu.map_raw_event(event->attr.config);
 	} else {
 		/* The event type is not (yet) supported. */
 		return -EOPNOTSUPP;
@@ -605,7 +1273,7 @@
 	hwc->config = 0;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = MAX_PERIOD;
+		hwc->sample_period  = mipspmu.max_period;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -618,70 +1286,47 @@
 	}
 
 	event->destroy = hw_perf_event_destroy;
-
 	return err;
 }
 
 static void pause_local_counters(void)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	int counters = mipspmu->num_counters;
+	int ctr = mipspmu.num_counters;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	switch (counters) {
-	case 4:
-		cpuc->saved_ctrl[3] = r_c0_perfctrl3();
-		w_c0_perfctrl3(cpuc->saved_ctrl[3] &
-			~M_PERFCTL_COUNT_EVENT_WHENEVER);
-	case 3:
-		cpuc->saved_ctrl[2] = r_c0_perfctrl2();
-		w_c0_perfctrl2(cpuc->saved_ctrl[2] &
-			~M_PERFCTL_COUNT_EVENT_WHENEVER);
-	case 2:
-		cpuc->saved_ctrl[1] = r_c0_perfctrl1();
-		w_c0_perfctrl1(cpuc->saved_ctrl[1] &
-			~M_PERFCTL_COUNT_EVENT_WHENEVER);
-	case 1:
-		cpuc->saved_ctrl[0] = r_c0_perfctrl0();
-		w_c0_perfctrl0(cpuc->saved_ctrl[0] &
-			~M_PERFCTL_COUNT_EVENT_WHENEVER);
-	}
+	do {
+		ctr--;
+		cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
+		mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
+					 ~M_PERFCTL_COUNT_EVENT_WHENEVER);
+	} while (ctr > 0);
 	local_irq_restore(flags);
 }
 
 static void resume_local_counters(void)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	int counters = mipspmu->num_counters;
-	unsigned long flags;
+	int ctr = mipspmu.num_counters;
 
-	local_irq_save(flags);
-	switch (counters) {
-	case 4:
-		w_c0_perfctrl3(cpuc->saved_ctrl[3]);
-	case 3:
-		w_c0_perfctrl2(cpuc->saved_ctrl[2]);
-	case 2:
-		w_c0_perfctrl1(cpuc->saved_ctrl[1]);
-	case 1:
-		w_c0_perfctrl0(cpuc->saved_ctrl[0]);
-	}
-	local_irq_restore(flags);
+	do {
+		ctr--;
+		mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
+	} while (ctr > 0);
 }
 
 static int mipsxx_pmu_handle_shared_irq(void)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct perf_sample_data data;
-	unsigned int counters = mipspmu->num_counters;
-	unsigned int counter;
+	unsigned int counters = mipspmu.num_counters;
+	u64 counter;
 	int handled = IRQ_NONE;
 	struct pt_regs *regs;
 
 	if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
 		return handled;
-
 	/*
 	 * First we pause the local counters, so that when we are locked
 	 * here, the counters are all paused. When it gets locked due to
@@ -702,13 +1347,9 @@
 #define HANDLE_COUNTER(n)						\
 	case n + 1:							\
 		if (test_bit(n, cpuc->used_mask)) {			\
-			counter = r_c0_perfcntr ## n();			\
-			if (counter & M_COUNTER_OVERFLOW) {		\
-				w_c0_perfcntr ## n(counter &		\
-						VALID_COUNT);		\
-				if (test_and_change_bit(n, cpuc->msbs))	\
-					handle_associated_event(cpuc,	\
-						n, &data, regs);	\
+			counter = mipspmu.read_counter(n);		\
+			if (counter & mipspmu.overflow) {		\
+				handle_associated_event(cpuc, n, &data, regs); \
 				handled = IRQ_HANDLED;			\
 			}						\
 		}
@@ -733,104 +1374,11 @@
 	return handled;
 }
 
-static irqreturn_t
-mipsxx_pmu_handle_irq(int irq, void *dev)
+static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
 {
 	return mipsxx_pmu_handle_shared_irq();
 }
 
-static void mipsxx_pmu_start(void)
-{
-#ifdef CONFIG_MIPS_MT_SMP
-	write_unlock(&pmuint_rwlock);
-#endif
-	resume_local_counters();
-}
-
-/*
- * MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed across CPUs. Hence if we want to do global
- * control, we need cross CPU calls. on_each_cpu() can help us, but we
- * can not make sure this function is called with interrupts enabled. So
- * here we pause local counters and then grab a rwlock and leave the
- * counters on other CPUs alone. If any counter interrupt raises while
- * we own the write lock, simply pause local counters on that CPU and
- * spin in the handler. Also we know we won't be switched to another
- * CPU after pausing local counters and before grabbing the lock.
- */
-static void mipsxx_pmu_stop(void)
-{
-	pause_local_counters();
-#ifdef CONFIG_MIPS_MT_SMP
-	write_lock(&pmuint_rwlock);
-#endif
-}
-
-static int
-mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *hwc)
-{
-	int i;
-
-	/*
-	 * We only need to care the counter mask. The range has been
-	 * checked definitely.
-	 */
-	unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
-
-	for (i = mipspmu->num_counters - 1; i >= 0; i--) {
-		/*
-		 * Note that some MIPS perf events can be counted by both
-		 * even and odd counters, wheresas many other are only by
-		 * even _or_ odd counters. This introduces an issue that
-		 * when the former kind of event takes the counter the
-		 * latter kind of event wants to use, then the "counter
-		 * allocation" for the latter event will fail. In fact if
-		 * they can be dynamically swapped, they both feel happy.
-		 * But here we leave this issue alone for now.
-		 */
-		if (test_bit(i, &cntr_mask) &&
-			!test_and_set_bit(i, cpuc->used_mask))
-			return i;
-	}
-
-	return -EAGAIN;
-}
-
-static void
-mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	unsigned long flags;
-
-	WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
-	local_irq_save(flags);
-	cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
-		(evt->config_base & M_PERFCTL_CONFIG_MASK) |
-		/* Make sure interrupt enabled. */
-		M_PERFCTL_INTERRUPT_ENABLE;
-	/*
-	 * We do not actually let the counter run. Leave it until start().
-	 */
-	local_irq_restore(flags);
-}
-
-static void
-mipsxx_pmu_disable_event(int idx)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	unsigned long flags;
-
-	WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
-	local_irq_save(flags);
-	cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
-		~M_PERFCTL_COUNT_EVENT_WHENEVER;
-	mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
-	local_irq_restore(flags);
-}
-
 /* 24K */
 #define IS_UNSUPPORTED_24K_EVENT(r, b)					\
 	((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 ||		\
@@ -892,8 +1440,7 @@
  * then 128 needs to be added to 15 as the input for the event config,
  * i.e., 143 (0x8F) to be used.
  */
-static const struct mips_perf_event *
-mipsxx_pmu_map_raw_event(u64 config)
+static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 {
 	unsigned int raw_id = config & 0xff;
 	unsigned int base_id = raw_id & 0x7f;
@@ -970,40 +1517,44 @@
 	return &raw_event;
 }
 
-static struct mips_pmu mipsxxcore_pmu = {
-	.handle_irq = mipsxx_pmu_handle_irq,
-	.handle_shared_irq = mipsxx_pmu_handle_shared_irq,
-	.start = mipsxx_pmu_start,
-	.stop = mipsxx_pmu_stop,
-	.alloc_counter = mipsxx_pmu_alloc_counter,
-	.read_counter = mipsxx_pmu_read_counter,
-	.write_counter = mipsxx_pmu_write_counter,
-	.enable_event = mipsxx_pmu_enable_event,
-	.disable_event = mipsxx_pmu_disable_event,
-	.map_raw_event = mipsxx_pmu_map_raw_event,
-	.general_event_map = &mipsxxcore_event_map,
-	.cache_event_map = &mipsxxcore_cache_map,
-};
+static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
+{
+	unsigned int raw_id = config & 0xff;
+	unsigned int base_id = raw_id & 0x7f;
 
-static struct mips_pmu mipsxx74Kcore_pmu = {
-	.handle_irq = mipsxx_pmu_handle_irq,
-	.handle_shared_irq = mipsxx_pmu_handle_shared_irq,
-	.start = mipsxx_pmu_start,
-	.stop = mipsxx_pmu_stop,
-	.alloc_counter = mipsxx_pmu_alloc_counter,
-	.read_counter = mipsxx_pmu_read_counter,
-	.write_counter = mipsxx_pmu_write_counter,
-	.enable_event = mipsxx_pmu_enable_event,
-	.disable_event = mipsxx_pmu_disable_event,
-	.map_raw_event = mipsxx_pmu_map_raw_event,
-	.general_event_map = &mipsxx74Kcore_event_map,
-	.cache_event_map = &mipsxx74Kcore_cache_map,
-};
+
+	raw_event.cntr_mask = CNTR_ALL;
+	raw_event.event_id = base_id;
+
+	if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
+		if (base_id > 0x42)
+			return ERR_PTR(-EOPNOTSUPP);
+	} else {
+		if (base_id > 0x3a)
+			return ERR_PTR(-EOPNOTSUPP);
+	}
+
+	switch (base_id) {
+	case 0x00:
+	case 0x0f:
+	case 0x1e:
+	case 0x1f:
+	case 0x2f:
+	case 0x34:
+	case 0x3b ... 0x3f:
+		return ERR_PTR(-EOPNOTSUPP);
+	default:
+		break;
+	}
+
+	return &raw_event;
+}
 
 static int __init
 init_hw_perf_events(void)
 {
 	int counters, irq;
+	int counter_bits;
 
 	pr_info("Performance counters: ");
 
@@ -1035,32 +1586,36 @@
 	}
 #endif
 
-	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+	mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
 
 	switch (current_cpu_type()) {
 	case CPU_24K:
-		mipsxxcore_pmu.name = "mips/24K";
-		mipsxxcore_pmu.num_counters = counters;
-		mipsxxcore_pmu.irq = irq;
-		mipspmu = &mipsxxcore_pmu;
+		mipspmu.name = "mips/24K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
 		break;
 	case CPU_34K:
-		mipsxxcore_pmu.name = "mips/34K";
-		mipsxxcore_pmu.num_counters = counters;
-		mipsxxcore_pmu.irq = irq;
-		mipspmu = &mipsxxcore_pmu;
+		mipspmu.name = "mips/34K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
 		break;
 	case CPU_74K:
-		mipsxx74Kcore_pmu.name = "mips/74K";
-		mipsxx74Kcore_pmu.num_counters = counters;
-		mipsxx74Kcore_pmu.irq = irq;
-		mipspmu = &mipsxx74Kcore_pmu;
+		mipspmu.name = "mips/74K";
+		mipspmu.general_event_map = &mipsxx74Kcore_event_map;
+		mipspmu.cache_event_map = &mipsxx74Kcore_cache_map;
 		break;
 	case CPU_1004K:
-		mipsxxcore_pmu.name = "mips/1004K";
-		mipsxxcore_pmu.num_counters = counters;
-		mipsxxcore_pmu.irq = irq;
-		mipspmu = &mipsxxcore_pmu;
+		mipspmu.name = "mips/1004K";
+		mipspmu.general_event_map = &mipsxxcore_event_map;
+		mipspmu.cache_event_map = &mipsxxcore_cache_map;
+		break;
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+		mipspmu.name = "octeon";
+		mipspmu.general_event_map = &octeon_event_map;
+		mipspmu.cache_event_map = &octeon_cache_map;
+		mipspmu.map_raw_event = octeon_pmu_map_raw_event;
 		break;
 	default:
 		pr_cont("Either hardware does not support performance "
@@ -1068,15 +1623,33 @@
 		return -ENODEV;
 	}
 
-	if (mipspmu)
-		pr_cont("%s PMU enabled, %d counters available to each "
-			"CPU, irq %d%s\n", mipspmu->name, counters, irq,
-			irq < 0 ? " (share with timer interrupt)" : "");
+	mipspmu.num_counters = counters;
+	mipspmu.irq = irq;
+
+	if (read_c0_perfctrl0() & M_PERFCTL_WIDE) {
+		mipspmu.max_period = (1ULL << 63) - 1;
+		mipspmu.valid_count = (1ULL << 63) - 1;
+		mipspmu.overflow = 1ULL << 63;
+		mipspmu.read_counter = mipsxx_pmu_read_counter_64;
+		mipspmu.write_counter = mipsxx_pmu_write_counter_64;
+		counter_bits = 64;
+	} else {
+		mipspmu.max_period = (1ULL << 31) - 1;
+		mipspmu.valid_count = (1ULL << 31) - 1;
+		mipspmu.overflow = 1ULL << 31;
+		mipspmu.read_counter = mipsxx_pmu_read_counter;
+		mipspmu.write_counter = mipsxx_pmu_write_counter;
+		counter_bits = 32;
+	}
+
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+	pr_cont("%s PMU enabled, %d %d-bit counters available to each "
+		"CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
+		irq < 0 ? " (share with timer interrupt)" : "");
 
 	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 
 	return 0;
 }
 early_initcall(init_hw_perf_events);
-
-#endif /* defined(CONFIG_CPU_MIPS32)... */
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index b30cb25..c47f96e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -9,13 +9,13 @@
  * Copyright (C) 2004 Thiemo Seufer
  */
 #include <linux/errno.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/tick.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
+#include <linux/export.h>
 #include <linux/ptrace.h>
 #include <linux/mman.h>
 #include <linux/personality.h>
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 5b7eade4..6b8b420 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/bootmem.h>
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index 060563a..07fc524 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -7,7 +7,7 @@
  * Copyright (C) 2001 MIPS Technologies, Inc.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pm.h>
 #include <linux/types.h>
 #include <linux/reboot.h>
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 7a80b7cd..933166f 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -19,7 +19,6 @@
 
 #include <linux/device.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 865bc7a..a632bc1 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -496,7 +496,7 @@
 	sys	sys_lookup_dcookie	4
 	sys	sys_epoll_create	1
 	sys	sys_epoll_ctl		4
-	sys	sys_epoll_wait		3	/* 4250 */
+	sys	sys_epoll_wait		4	/* 4250 */
 	sys	sys_remap_file_pages	5
 	sys	sys_set_tid_address	1
 	sys	sys_restart_syscall	0
@@ -591,6 +591,8 @@
 	sys	sys_syncfs		1
 	sys	sys_sendmmsg		4
 	sys	sys_setns		2
+	sys	sys_process_vm_readv	6	/* 4345 */
+	sys	sys_process_vm_writev	6
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index fb7334b..3b5a5e9 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -430,4 +430,6 @@
 	PTR	sys_syncfs
 	PTR	sys_sendmmsg
 	PTR	sys_setns
+	PTR	sys_process_vm_readv
+	PTR	sys_process_vm_writev		/* 5305 */
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 6de1f59..6be6f70 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -430,4 +430,6 @@
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv
+	PTR	compat_sys_process_vm_writev	/* 6310 */
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 1d81316..5422855 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -548,4 +548,6 @@
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv	/* 4345 */
+	PTR	compat_sys_process_vm_writev
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8ad1d56..84af26a 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -12,7 +12,7 @@
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/initrd.h>
diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c
index da61134..39f7ab7 100644
--- a/arch/mips/kernel/spinlock_test.c
+++ b/arch/mips/kernel/spinlock_test.c
@@ -3,7 +3,7 @@
 #include <linux/hrtimer.h>
 #include <linux/fs.h>
 #include <linux/debugfs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 
 
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index d52ff77..1ba775d 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -5,7 +5,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/stacktrace.h>
 
 /*
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 1083ad4..99d73b7 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -21,7 +21,7 @@
 #include <linux/timex.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/cpu-features.h>
 #include <asm/div64.h>
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cbea618..5c8a49d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
@@ -1597,7 +1596,8 @@
 	}
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+	if (!cpu_data[cpu].asid_cache)
+		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index eb319b5..aedb894 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -73,7 +73,6 @@
  *       Undo the partial store in this case.
  */
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3efcb06..bfa12a4 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -29,7 +29,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index 7e9c0ff..77ed70f 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -7,7 +7,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
index 44a3677..de1cb2b 100644
--- a/arch/mips/lantiq/devices.c
+++ b/arch/mips/lantiq/devices.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 56ba007..e34fcfd 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
index 9b8af77..1ff6c9d 100644
--- a/arch/mips/lantiq/setup.c
+++ b/arch/mips/lantiq/setup.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
index 22d823a..6522583 100644
--- a/arch/mips/lantiq/xway/clk-ase.c
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
index ddd3959..696b1a3 100644
--- a/arch/mips/lantiq/xway/clk-xway.c
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
index d0e32ab..d614aa7 100644
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 4278a45..cbb6ae5 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <lantiq_soc.h>
 #include <xway_dma.h>
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index a321451..d2fa98f 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
index a479355..b91c7f1 100644
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index 67d59d6..ff9991c 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -9,7 +9,7 @@
 
 #include <linux/slab.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
index abe49f4..ae4959a 100644
--- a/arch/mips/lantiq/xway/prom-ase.c
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
index 1686692a..2228133 100644
--- a/arch/mips/lantiq/xway/prom-xway.c
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index a1be36d..3d41f0b 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/reboot.h>
 
 #include <lantiq_soc.h>
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c
index ed007a2..502b059 100644
--- a/arch/mips/loongson/common/platform.c
+++ b/arch/mips/loongson/common/platform.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/smp.h>
 #include <linux/platform_device.h>
 
 static struct platform_device loongson2_cpufreq_device = {
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 16c4d25..daa81f7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -169,6 +169,10 @@
 		octeon_flush_icache_all_cores(vma);
 }
 
+static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
 
 /**
  * Probe Octeon's caches
@@ -273,6 +277,8 @@
 	flush_icache_range		= octeon_flush_icache_range;
 	local_flush_icache_range	= local_octeon_flush_icache_range;
 
+	__flush_kernel_vmap_range	= octeon_flush_kernel_vmap_range;
+
 	build_clear_page();
 	build_copy_page();
 }
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index e6b0efd..0765583 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -299,6 +299,11 @@
 	write_c0_status(flags);
 }
 
+static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
+
 static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
 {
 	/* Catch bad driver code */
@@ -323,6 +328,8 @@
 	flush_icache_range = r3k_flush_icache_range;
 	local_flush_icache_range = r3k_flush_icache_range;
 
+	__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
+
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
 	flush_data_cache_page = r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b9aabb9..a79fe9a 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -722,6 +722,39 @@
 		r4k_blast_icache();
 }
 
+struct flush_kernel_vmap_range_args {
+	unsigned long	vaddr;
+	int		size;
+};
+
+static inline void local_r4k_flush_kernel_vmap_range(void *args)
+{
+	struct flush_kernel_vmap_range_args *vmra = args;
+	unsigned long vaddr = vmra->vaddr;
+	int size = vmra->size;
+
+	/*
+	 * Aliases only affect the primary caches so don't bother with
+	 * S-caches or T-caches.
+	 */
+	if (cpu_has_safe_index_cacheops && size >= dcache_size)
+		r4k_blast_dcache();
+	else {
+		R4600_HIT_CACHEOP_WAR_IMPL;
+		blast_dcache_range(vaddr, vaddr + size);
+	}
+}
+
+static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	struct flush_kernel_vmap_range_args args;
+
+	args.vaddr = (unsigned long) vaddr;
+	args.size = size;
+
+	r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args);
+}
+
 static inline void rm7k_erratum31(void)
 {
 	const unsigned long ic_lsize = 32;
@@ -1403,6 +1436,8 @@
 	flush_cache_page	= r4k_flush_cache_page;
 	flush_cache_range	= r4k_flush_cache_range;
 
+	__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
+
 	flush_cache_sigtramp	= r4k_flush_cache_sigtramp;
 	flush_icache_all	= r4k_flush_icache_all;
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index d352fad..a43c197c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -253,6 +253,11 @@
 	}
 }
 
+static void tx39_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+	BUG();
+}
+
 static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
 	unsigned long end;
@@ -394,6 +399,8 @@
 		flush_icache_range = tx39_flush_icache_range;
 		local_flush_icache_range = tx39_flush_icache_range;
 
+		__flush_kernel_vmap_range = tx39_flush_kernel_vmap_range;
+
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
 		flush_data_cache_page = tx39_flush_data_cache_page;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 12af739..829320c 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -35,6 +35,11 @@
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
 
+void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
+
+EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
+
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
 void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 40424af..87bb85d 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -223,8 +223,8 @@
 	local_irq_restore(flags);
 }
 
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-			    unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+		     unsigned long entryhi, unsigned long pagemask)
 {
 	unsigned long flags;
 	unsigned long old_ctx;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index ba40325..0d394e0 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -337,8 +337,8 @@
 	EXIT_CRITICAL(flags);
 }
 
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
-	unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+		     unsigned long entryhi, unsigned long pagemask)
 {
 	unsigned long flags;
 	unsigned long wired;
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index f87c164..b648b48 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -5,6 +5,11 @@
 cflags-$(CONFIG_NLM_COMMON)  += -I$(srctree)/arch/mips/include/asm/netlogic
 
 #
+# use mips64 if xlr is not available
+#
+cflags-$(CONFIG_NLM_XLR)	+= $(call cc-option,-march=xlr,-march=mips64)
+
+#
 # NETLOGIC XLR/XLS SoC, Simulator and boards
 #
 core-$(CONFIG_NLM_XLR)	      += arch/mips/netlogic/xlr/
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 4828025..cee25dd 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -53,7 +53,7 @@
 unsigned long nlm_common_ebase = 0x0;
 struct psb_info nlm_prom_info;
 
-static void nlm_early_serial_setup(void)
+static void __init nlm_early_serial_setup(void)
 {
 	struct uart_port s;
 	nlm_reg_t *uart_base;
@@ -101,7 +101,7 @@
 	/* Nothing yet */
 }
 
-static void build_arcs_cmdline(int *argv)
+static void __init build_arcs_cmdline(int *argv)
 {
 	int i, remain, len;
 	char *arg;
diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c
index d842bce..080284d 100644
--- a/arch/mips/netlogic/xlr/smp.c
+++ b/arch/mips/netlogic/xlr/smp.c
@@ -158,6 +158,10 @@
 
 	num_cpus = 1;
 	for (i = 0; i < NR_CPUS; i++) {
+		/*
+		 * BSP is not set in nlm_cpu_ready array, it is only for
+		 * ASPs (goto see smpboot.S)
+		 */
 		if (nlm_cpu_ready[i]) {
 			cpu_set(i, phys_cpu_present_map);
 			__cpu_number_map[i] = num_cpus;
@@ -191,7 +195,7 @@
 
 unsigned long secondary_entry_point;
 
-int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask)
 {
 	unsigned int tid, pid, ipi, i, boot_cpu;
 	void *reset_vec;
diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S
index b8e0744..8cb7889 100644
--- a/arch/mips/netlogic/xlr/smpboot.S
+++ b/arch/mips/netlogic/xlr/smpboot.S
@@ -32,17 +32,19 @@
  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <linux/init.h>
+
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 
-
-/* Don't jump to linux function from Bootloader stack. Change it
- * here. Kernel might allocate bootloader memory before all the CPUs are
- * brought up (eg: Inode cache region) and we better don't overwrite this
- * memory
+/*
+ * Early code for secondary CPUs. This will get them out of the bootloader
+ * code and into linux. Needed because the bootloader area will be taken
+ * and initialized by linux.
  */
+	__CPUINIT
 NESTED(prom_pre_boot_secondary_cpus, 16, sp)
 	.set	mips64
 	mfc0	t0, $15, 1	# read ebase
@@ -73,7 +75,11 @@
 	jr	t0
 	nop
 END(prom_pre_boot_secondary_cpus)
+	__FINIT
 
+/*
+ * NMI code, used for CPU wakeup, copied to reset entry
+ */
 NESTED(nlm_boot_smp_nmi, 0, sp)
 	.set push
 	.set noat
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
deleted file mode 100644
index 98e86dd..0000000
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
-	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
-	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
-	.name	= "pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PNX8550_PCIMEM,
-	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
-	.name	= "pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
-	.pci_ops	= &pnx8550_pci_ops,
-	.io_map_base	= PNX8550_PORT_BASE,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
-	int pci_mem_code;
-	int mem_size = get_system_mem_size() >> 20;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* Calc the PCI mem size code */
-	if (mem_size >= 128)
-		pci_mem_code = SIZE_128M;
-	else if (mem_size >= 64)
-		pci_mem_code = SIZE_64M;
-	else if (mem_size >= 32)
-		pci_mem_code = SIZE_32M;
-	else
-		pci_mem_code = SIZE_16M;
-
-	/* Set PCI_XIO registers */
-	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
-	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
-	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
-	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
-	/* Send memory transaction via PCI_BASE2 */
-	outl(0x00000001, PCI_BASE | PCI_IO);
-
-	/* Unlock the setup register */
-	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
-	/*
-	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
-	 * to work, and in order for bus_to_baddr to work without any
-	 * hacks.
-	 */
-	outl(0x00000000, PCI_BASE | PCI_BASE10);
-
-	/*
-	 *These two bars are set by default or the boot code.
-	 * However, it's safer to set them here so we're not boot
-	 * code dependent.
-	 */
-	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
-	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
-
-	outl(PCI_EN_TA |
-	     PCI_EN_PCI2MMI |
-	     PCI_EN_XIO |
-	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
-	     PCI_SETUP_BASE18_EN |
-	     PCI_SETUP_BASE14_EN |
-	     PCI_SETUP_BASE10_PREF |
-	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
-	     PCI_SETUP_CFGMANAGE_EN |
-	     PCI_SETUP_PCIARB_EN,
-	     PCI_BASE |
-	     PCI_SETUP);	/* PCI_SETUP */
-	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
-
-	register_pci_controller(&pnx8550_controller);
-
-	return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
deleted file mode 100644
index 71adac3..0000000
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	},
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	char* argptr;
-
-	board_setup();  /* board specific setup */
-
-        _machine_restart = pnx8550_machine_restart;
-        _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_power_off;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* IO/MEM resources. */
-	set_io_port_base(PNX8550_PORT_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-	iomem_resource.start = 0;
-	iomem_resource.end = ~0;
-
-	/* Request I/O space for devices on this board */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources + i);
-
-	/* Place the Mode Control bit for GPIO pin 16 in primary function */
-	/* Pin 16 is used by UART1, UA1_TX                                */
-	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
-			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
-			PNX8550_GPIO_MC1);
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
-		argptr += strlen("console=ttyS");
-		pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
-		/* We must initialize the UART (console) before early printk */
-		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
-		ip3106_lcr(UART_BASE, pnx8550_console_port) =
-			PNX8XXX_UART_LCR_8BIT;
-		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
-	}
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 4df8799..bb82cbdb 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -18,14 +18,13 @@
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 					ops-bcm63xx.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
-obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
-obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
 obj-$(CONFIG_LEMOTE_MACH2F)	+= fixup-lemote2f.o ops-loongson2.o
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
deleted file mode 100644
index e2ddfc4..0000000
--- a/arch/mips/pci/fixup-au1000.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Board specific PCI fixups.
- *
- * Copyright 2001-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-
-extern char irq_tab_alchemy[][5];
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab_alchemy[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
deleted file mode 100644
index 9a57c5a..0000000
--- a/arch/mips/pci/ops-au1000.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Alchemy/AMD Au1xx0 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  Support for all devices (greater than 16) added by David Gathright.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#undef	DEBUG
-#ifdef	DEBUG
-#define DBG(x...) printk(KERN_DEBUG x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_ACCESS_READ  0
-#define PCI_ACCESS_WRITE 1
-
-int (*board_pci_idsel)(unsigned int devsel, int assert);
-
-void mod_wired_entry(int entry, unsigned long entrylo0,
-		unsigned long entrylo1, unsigned long entryhi,
-		unsigned long pagemask)
-{
-	unsigned long old_pagemask;
-	unsigned long old_ctx;
-
-	/* Save old context and create impossible VPN2 value */
-	old_ctx = read_c0_entryhi() & 0xff;
-	old_pagemask = read_c0_pagemask();
-	write_c0_index(entry);
-	write_c0_pagemask(pagemask);
-	write_c0_entryhi(entryhi);
-	write_c0_entrylo0(entrylo0);
-	write_c0_entrylo1(entrylo1);
-	tlb_write_indexed();
-	write_c0_entryhi(old_ctx);
-	write_c0_pagemask(old_pagemask);
-}
-
-static struct vm_struct *pci_cfg_vm;
-static int pci_cfg_wired_entry;
-static unsigned long last_entryLo0, last_entryLo1;
-
-/*
- * We can't ioremap the entire pci config space because it's too large.
- * Nor can we call ioremap dynamically because some device drivers use
- * the PCI config routines from within interrupt handlers and that
- * becomes a problem in get_vm_area().  We use one wired TLB to handle
- * all config accesses for all busses.
- */
-void __init au1x_pci_cfg_init(void)
-{
-	/* Reserve a wired entry for PCI config accesses */
-	pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
-	if (!pci_cfg_vm)
-		panic(KERN_ERR "PCI unable to get vm area\n");
-	pci_cfg_wired_entry = read_c0_wired();
-	add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
-	last_entryLo0 = last_entryLo1 = 0xffffffff;
-}
-
-static int config_access(unsigned char access_type, struct pci_bus *bus,
-			 unsigned int dev_fn, unsigned char where, u32 *data)
-{
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-	unsigned int device = PCI_SLOT(dev_fn);
-	unsigned int function = PCI_FUNC(dev_fn);
-	unsigned long offset, status;
-	unsigned long cfg_base;
-	unsigned long flags;
-	int error = PCIBIOS_SUCCESSFUL;
-	unsigned long entryLo0, entryLo1;
-
-	if (device > 19) {
-		*data = 0xffffffff;
-		return -1;
-	}
-
-	local_irq_save(flags);
-	au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)),
-			Au1500_PCI_STATCMD);
-	au_sync_udelay(1);
-
-	/*
-	 * Allow board vendors to implement their own off-chip IDSEL.
-	 * If it doesn't succeed, may as well bail out at this point.
-	 */
-	if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
-		*data = 0xffffffff;
-		local_irq_restore(flags);
-		return -1;
-	}
-
-	/* Setup the config window */
-	if (bus->number == 0)
-		cfg_base = (1 << device) << 11;
-	else
-		cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
-
-	/* Setup the lower bits of the 36-bit address */
-	offset = (function << 8) | (where & ~0x3);
-	/* Pick up any address that falls below the page mask */
-	offset |= cfg_base & ~PAGE_MASK;
-
-	/* Page boundary */
-	cfg_base = cfg_base & PAGE_MASK;
-
-	/*
-	 * To improve performance, if the current device is the same as
-	 * the last device accessed, we don't touch the TLB.
-	 */
-	entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
-	entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
-	if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
-		mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
-				(unsigned long)pci_cfg_vm->addr, PM_4K);
-		last_entryLo0 = entryLo0;
-		last_entryLo1 = entryLo1;
-	}
-
-	if (access_type == PCI_ACCESS_WRITE)
-		au_writel(*data, (int)(pci_cfg_vm->addr + offset));
-	else
-		*data = au_readl((int)(pci_cfg_vm->addr + offset));
-
-	au_sync_udelay(2);
-
-	DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
-	    access_type, bus->number, device, where, *data, offset);
-
-	/* Check master abort */
-	status = au_readl(Au1500_PCI_STATCMD);
-
-	if (status & (1 << 29)) {
-		*data = 0xffffffff;
-		error = -1;
-		DBG("Au1x Master Abort\n");
-	} else if ((status >> 28) & 0xf) {
-		DBG("PCI ERR detected: device %u, status %lx\n",
-		    device, (status >> 28) & 0xf);
-
-		/* Clear errors */
-		au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
-
-		*data = 0xffffffff;
-		error = -1;
-	}
-
-	/* Take away the IDSEL. */
-	if (board_pci_idsel)
-		(void)board_pci_idsel(device, 0);
-
-	local_irq_restore(flags);
-	return error;
-#endif
-}
-
-static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
-			    int where,	u8 *val)
-{
-	u32 data;
-	int ret;
-
-	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
-	if (where & 1)
-		data >>= 8;
-	if (where & 2)
-		data >>= 16;
-	*val = data & 0xff;
-	return ret;
-}
-
-static int read_config_word(struct pci_bus *bus, unsigned int devfn,
-			    int where, u16 *val)
-{
-	u32 data;
-	int ret;
-
-	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
-	if (where & 2)
-		data >>= 16;
-	*val = data & 0xffff;
-	return ret;
-}
-
-static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
-			     int where, u32 *val)
-{
-	int ret;
-
-	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
-	return ret;
-}
-
-static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
-			     int where, u8 val)
-{
-	u32 data = 0;
-
-	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-		return -1;
-
-	data = (data & ~(0xff << ((where & 3) << 3))) |
-	       (val << ((where & 3) << 3));
-
-	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_bus *bus, unsigned int devfn,
-			     int where, u16 val)
-{
-	u32 data = 0;
-
-	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-		return -1;
-
-	data = (data & ~(0xffff << ((where & 3) << 3))) |
-	       (val << ((where & 3) << 3));
-
-	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
-			      int where, u32 val)
-{
-	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int config_read(struct pci_bus *bus, unsigned int devfn,
-		       int where, int size, u32 *val)
-{
-	switch (size) {
-	case 1: {
-			u8 _val;
-			int rc = read_config_byte(bus, devfn, where, &_val);
-
-			*val = _val;
-			return rc;
-		}
-	case 2: {
-			u16 _val;
-			int rc = read_config_word(bus, devfn, where, &_val);
-
-			*val = _val;
-			return rc;
-		}
-	default:
-		return read_config_dword(bus, devfn, where, val);
-	}
-}
-
-static int config_write(struct pci_bus *bus, unsigned int devfn,
-			int where, int size, u32 val)
-{
-	switch (size) {
-	case 1:
-		return write_config_byte(bus, devfn, where, (u8) val);
-	case 2:
-		return write_config_word(bus, devfn, where, (u16) val);
-	default:
-		return write_config_dword(bus, devfn, where, val);
-	}
-}
-
-struct pci_ops au1x_pci_ops = {
-	config_read,
-	config_write
-};
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
new file mode 100644
index 0000000..b5ce041
--- /dev/null
+++ b/arch/mips/pci/pci-alchemy.c
@@ -0,0 +1,517 @@
+/*
+ * Alchemy PCI host mode support.
+ *
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Support for all devices (greater than 16) added by David Gathright.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_DEBUG_PCI
+#define DBG(x...) printk(KERN_DEBUG x)
+#else
+#define DBG(x...) do {} while (0)
+#endif
+
+#define PCI_ACCESS_READ		0
+#define PCI_ACCESS_WRITE	1
+
+struct alchemy_pci_context {
+	struct pci_controller alchemy_pci_ctrl;	/* leave as first member! */
+	void __iomem *regs;			/* ctrl base */
+	/* tools for wired entry for config space access */
+	unsigned long last_elo0;
+	unsigned long last_elo1;
+	int wired_entry;
+	struct vm_struct *pci_cfg_vm;
+
+	unsigned long pm[12];
+
+	int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+	int (*board_pci_idsel)(unsigned int devsel, int assert);
+};
+
+/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+ * in arch/mips/alchemy/common/setup.c
+ */
+static struct resource alchemy_pci_def_memres = {
+	.start	= ALCHEMY_PCI_MEMWIN_START,
+	.end	= ALCHEMY_PCI_MEMWIN_END,
+	.name	= "PCI memory space",
+	.flags	= IORESOURCE_MEM
+};
+
+static struct resource alchemy_pci_def_iores = {
+	.start	= ALCHEMY_PCI_IOWIN_START,
+	.end	= ALCHEMY_PCI_IOWIN_END,
+	.name	= "PCI IO space",
+	.flags	= IORESOURCE_IO
+};
+
+static void mod_wired_entry(int entry, unsigned long entrylo0,
+		unsigned long entrylo1, unsigned long entryhi,
+		unsigned long pagemask)
+{
+	unsigned long old_pagemask;
+	unsigned long old_ctx;
+
+	/* Save old context and create impossible VPN2 value */
+	old_ctx = read_c0_entryhi() & 0xff;
+	old_pagemask = read_c0_pagemask();
+	write_c0_index(entry);
+	write_c0_pagemask(pagemask);
+	write_c0_entryhi(entryhi);
+	write_c0_entrylo0(entrylo0);
+	write_c0_entrylo1(entrylo1);
+	tlb_write_indexed();
+	write_c0_entryhi(old_ctx);
+	write_c0_pagemask(old_pagemask);
+}
+
+static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx)
+{
+	ctx->wired_entry = read_c0_wired();
+	add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+	ctx->last_elo0 = ctx->last_elo1 = ~0;
+}
+
+static int config_access(unsigned char access_type, struct pci_bus *bus,
+			 unsigned int dev_fn, unsigned char where, u32 *data)
+{
+	struct alchemy_pci_context *ctx = bus->sysdata;
+	unsigned int device = PCI_SLOT(dev_fn);
+	unsigned int function = PCI_FUNC(dev_fn);
+	unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r;
+	int error = PCIBIOS_SUCCESSFUL;
+
+	if (device > 19) {
+		*data = 0xffffffff;
+		return -1;
+	}
+
+	/* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
+	 * on resume, clearing our wired entry.  Unfortunately the ->resume()
+	 * callback is called way way way too late (and ->suspend() too early)
+	 * to have them destroy and recreate it.  Instead just test if c0_wired
+	 * is now lower than the index we retrieved before suspending and then
+	 * recreate the entry if necessary.  Of course this is totally bonkers
+	 * and breaks as soon as someone else adds another wired entry somewhere
+	 * else.  Anyone have any ideas how to handle this better?
+	 */
+	if (unlikely(read_c0_wired() < ctx->wired_entry))
+		alchemy_pci_wired_entry(ctx);
+
+	local_irq_save(flags);
+	r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff;
+	r |= PCI_STATCMD_STATUS(0x2000);
+	__raw_writel(r, ctx->regs + PCI_REG_STATCMD);
+	wmb();
+
+	/* Allow board vendors to implement their own off-chip IDSEL.
+	 * If it doesn't succeed, may as well bail out at this point.
+	 */
+	if (ctx->board_pci_idsel(device, 1) == 0) {
+		*data = 0xffffffff;
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	/* Setup the config window */
+	if (bus->number == 0)
+		cfg_base = (1 << device) << 11;
+	else
+		cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
+
+	/* Setup the lower bits of the 36-bit address */
+	offset = (function << 8) | (where & ~0x3);
+	/* Pick up any address that falls below the page mask */
+	offset |= cfg_base & ~PAGE_MASK;
+
+	/* Page boundary */
+	cfg_base = cfg_base & PAGE_MASK;
+
+	/* To improve performance, if the current device is the same as
+	 * the last device accessed, we don't touch the TLB.
+	 */
+	entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+	entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+	if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) {
+		mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1,
+				(unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+		ctx->last_elo0 = entryLo0;
+		ctx->last_elo1 = entryLo1;
+	}
+
+	if (access_type == PCI_ACCESS_WRITE)
+		__raw_writel(*data, ctx->pci_cfg_vm->addr + offset);
+	else
+		*data = __raw_readl(ctx->pci_cfg_vm->addr + offset);
+	wmb();
+
+	DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n",
+	    access_type, bus->number, device, where, *data, offset);
+
+	/* check for errors, master abort */
+	status = __raw_readl(ctx->regs + PCI_REG_STATCMD);
+	if (status & (1 << 29)) {
+		*data = 0xffffffff;
+		error = -1;
+		DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+		    access_type, bus->number, device);
+	} else if ((status >> 28) & 0xf) {
+		DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
+		    device, (status >> 28) & 0xf);
+
+		/* clear errors */
+		__raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD);
+
+		*data = 0xffffffff;
+		error = -1;
+	}
+
+	/* Take away the IDSEL. */
+	(void)ctx->board_pci_idsel(device, 0);
+
+	local_irq_restore(flags);
+	return error;
+}
+
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+			    int where,	u8 *val)
+{
+	u32 data;
+	int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+	if (where & 1)
+		data >>= 8;
+	if (where & 2)
+		data >>= 16;
+	*val = data & 0xff;
+	return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+			    int where, u16 *val)
+{
+	u32 data;
+	int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+	if (where & 2)
+		data >>= 16;
+	*val = data & 0xffff;
+	return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+			     int where, u32 *val)
+{
+	return config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+}
+
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+			     int where, u8 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xff << ((where & 3) << 3))) |
+	       (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+			     int where, u16 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xffff << ((where & 3) << 3))) |
+	       (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+			      int where, u32 val)
+{
+	return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val);
+}
+
+static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn,
+		       int where, int size, u32 *val)
+{
+	switch (size) {
+	case 1: {
+			u8 _val;
+			int rc = read_config_byte(bus, devfn, where, &_val);
+
+			*val = _val;
+			return rc;
+		}
+	case 2: {
+			u16 _val;
+			int rc = read_config_word(bus, devfn, where, &_val);
+
+			*val = _val;
+			return rc;
+		}
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+static struct pci_ops alchemy_pci_ops = {
+	.read	= alchemy_pci_read,
+	.write	= alchemy_pci_write,
+};
+
+static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
+{
+	return 1;	/* success */
+}
+
+static int __devinit alchemy_pci_probe(struct platform_device *pdev)
+{
+	struct alchemy_pci_platdata *pd = pdev->dev.platform_data;
+	struct alchemy_pci_context *ctx;
+	void __iomem *virt_io;
+	unsigned long val;
+	struct resource *r;
+	int ret;
+
+	/* need at least PCI IRQ mapping table */
+	if (!pd) {
+		dev_err(&pdev->dev, "need platform data for PCI setup\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(&pdev->dev, "no memory for pcictl context\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no  pcictl ctrl regs resource\n");
+		ret = -ENODEV;
+		goto out1;
+	}
+
+	if (!request_mem_region(r->start, resource_size(r), pdev->name)) {
+		dev_err(&pdev->dev, "cannot claim pci regs\n");
+		ret = -ENODEV;
+		goto out1;
+	}
+
+	ctx->regs = ioremap_nocache(r->start, resource_size(r));
+	if (!ctx->regs) {
+		dev_err(&pdev->dev, "cannot map pci regs\n");
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	/* map parts of the PCI IO area */
+	/* REVISIT: if this changes with a newer variant (doubt it) make this
+	 * a platform resource.
+	 */
+	virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000);
+	if (!virt_io) {
+		dev_err(&pdev->dev, "cannot remap pci io space\n");
+		ret = -ENODEV;
+		goto out3;
+	}
+	ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
+
+#ifdef CONFIG_DMA_NONCOHERENT
+	/* Au1500 revisions older than AD have borked coherent PCI */
+	if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
+	    (read_c0_prid() < 0x01030202)) {
+		val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+		val |= PCI_CONFIG_NC;
+		__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+		wmb();
+		dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
+	}
+#endif
+
+	if (pd->board_map_irq)
+		ctx->board_map_irq = pd->board_map_irq;
+
+	if (pd->board_pci_idsel)
+		ctx->board_pci_idsel = pd->board_pci_idsel;
+	else
+		ctx->board_pci_idsel = alchemy_pci_def_idsel;
+
+	/* fill in relevant pci_controller members */
+	ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops;
+	ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres;
+	ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores;
+
+	/* we can't ioremap the entire pci config space because it's too large,
+	 * nor can we dynamically ioremap it because some drivers use the
+	 * PCI config routines from within atomic contex and that becomes a
+	 * problem in get_vm_area().  Instead we use one wired TLB entry to
+	 * handle all config accesses for all busses.
+	 */
+	ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+	if (!ctx->pci_cfg_vm) {
+		dev_err(&pdev->dev, "unable to get vm area\n");
+		ret = -ENOMEM;
+		goto out4;
+	}
+	ctx->wired_entry = 8192;	/* impossibly high value */
+
+	set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base);
+
+	/* board may want to modify bits in the config register, do it now */
+	val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+	val &= ~pd->pci_cfg_clr;
+	val |= pd->pci_cfg_set;
+	val &= ~PCI_CONFIG_PD;		/* clear disable bit */
+	__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+	wmb();
+
+	platform_set_drvdata(pdev, ctx);
+	register_pci_controller(&ctx->alchemy_pci_ctrl);
+
+	return 0;
+
+out4:
+	iounmap(virt_io);
+out3:
+	iounmap(ctx->regs);
+out2:
+	release_mem_region(r->start, resource_size(r));
+out1:
+	kfree(ctx);
+out:
+	return ret;
+}
+
+
+#ifdef CONFIG_PM
+/* save PCI controller register contents. */
+static int alchemy_pci_suspend(struct device *dev)
+{
+	struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+	ctx->pm[0]  = __raw_readl(ctx->regs + PCI_REG_CMEM);
+	ctx->pm[1]  = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
+	ctx->pm[2]  = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
+	ctx->pm[3]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
+	ctx->pm[4]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
+	ctx->pm[5]  = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
+	ctx->pm[6]  = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
+	ctx->pm[7]  = __raw_readl(ctx->regs + PCI_REG_ID);
+	ctx->pm[8]  = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
+	ctx->pm[9]  = __raw_readl(ctx->regs + PCI_REG_PARAM);
+	ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
+	ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
+
+	return 0;
+}
+
+static int alchemy_pci_resume(struct device *dev)
+{
+	struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+	__raw_writel(ctx->pm[0],  ctx->regs + PCI_REG_CMEM);
+	__raw_writel(ctx->pm[2],  ctx->regs + PCI_REG_B2BMASK_CCH);
+	__raw_writel(ctx->pm[3],  ctx->regs + PCI_REG_B2BBASE0_VID);
+	__raw_writel(ctx->pm[4],  ctx->regs + PCI_REG_B2BBASE1_SID);
+	__raw_writel(ctx->pm[5],  ctx->regs + PCI_REG_MWMASK_DEV);
+	__raw_writel(ctx->pm[6],  ctx->regs + PCI_REG_MWBASE_REV_CCL);
+	__raw_writel(ctx->pm[7],  ctx->regs + PCI_REG_ID);
+	__raw_writel(ctx->pm[8],  ctx->regs + PCI_REG_CLASSREV);
+	__raw_writel(ctx->pm[9],  ctx->regs + PCI_REG_PARAM);
+	__raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
+	__raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
+	wmb();
+	__raw_writel(ctx->pm[1],  ctx->regs + PCI_REG_CONFIG);
+	wmb();
+
+	return 0;
+}
+
+static const struct dev_pm_ops alchemy_pci_pmops = {
+	.suspend	= alchemy_pci_suspend,
+	.resume		= alchemy_pci_resume,
+};
+
+#define ALCHEMY_PCICTL_PM	(&alchemy_pci_pmops)
+
+#else
+#define ALCHEMY_PCICTL_PM	NULL
+#endif
+
+static struct platform_driver alchemy_pcictl_driver = {
+	.probe		= alchemy_pci_probe,
+	.driver	= {
+		.name	= "alchemy-pci",
+		.owner	= THIS_MODULE,
+		.pm	= ALCHEMY_PCICTL_PM,
+	},
+};
+
+static int __init alchemy_pci_init(void)
+{
+	/* Au1500/Au1550 have PCI */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1550:
+		return platform_driver_register(&alchemy_pcictl_driver);
+	}
+	return 0;
+}
+arch_initcall(alchemy_pci_init);
+
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct alchemy_pci_context *ctx = dev->sysdata;
+	if (ctx && ctx->board_map_irq)
+		return ctx->board_map_irq(dev, slot, pin);
+	return -1;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index a0e726e..193e949 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -9,6 +9,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
 #include <asm/sn/arch.h>
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 8656388..be1e1af 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 
 #include <asm/pci.h>
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 33bba7b..41af7fa 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/pci.h>
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index 0abfbe0..655308a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -14,6 +14,7 @@
 #include <asm/cacheflush.h>
 #include <asm/r4kcache.h>
 #include <asm/reboot.h>
+#include <asm/smp-ops.h>
 #include <asm/time.h>
 
 #include <msp_prom.h>
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index cf4c868..dcc926e 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -102,7 +102,7 @@
 
 	/* Get the boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
 		    sizeof(arcs_cmdline))
 			break;
 
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index 434d7b1..b7f1d9c 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -65,15 +65,11 @@
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
-	"	.set	push		\n"
-	"	.set	noreorder	\n"
-	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
-	"	.set	pop		\n"
 	"	lbu	%0, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=r" (res)
-	: "R" (vaddr));
+	: "m" (vaddr));
 
 	write_c0_status(sr);
 	ssnop_4();
@@ -93,15 +89,11 @@
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
-	"	.set	push		\n"
-	"	.set	noreorder	\n"
-	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
-	"	.set	pop		\n"
 	"	sb	%2, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=&r" (tmp)
-	: "R" (vaddr), "r" (c));
+	: "m" (vaddr), "r" (c));
 
 	write_c0_status(sr);
 	ssnop_4();
diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c
index 32f7009..49639e8 100644
--- a/arch/mips/pnx8550/common/prom.c
+++ b/arch/mips/pnx8550/common/prom.c
@@ -30,7 +30,7 @@
 }t_env_var;
 
 
-char * prom_getcmdline(void)
+char * __init prom_getcmdline(void)
 {
 	return &(arcs_cmdline[0]);
 }
diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
index ff0e7e3..1a1b03e 100644
--- a/arch/mips/powertv/Kconfig
+++ b/arch/mips/powertv/Kconfig
@@ -1,5 +1,3 @@
-source "arch/mips/powertv/asic/Kconfig"
-
 config BOOTLOADER_DRIVER
 	bool "PowerTV Bootloader Driver Support"
 	default n
diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig
deleted file mode 100644
index 2016bfe..0000000
--- a/arch/mips/powertv/asic/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-config MIN_RUNTIME_RESOURCES
-	bool "Support for minimum runtime resources"
-	default n
-	depends on POWERTV
-	help
-	  Enables support for minimizing the number of (SA asic) runtime
-	  resources that are preallocated by the kernel.
-
-config MIN_RUNTIME_DOCSIS
-	bool "Support for minimum DOCSIS resource"
-	default y
-	depends on MIN_RUNTIME_RESOURCES
-	help
-	  Enables support for the preallocated DOCSIS resource.
-
-config MIN_RUNTIME_PMEM
-	bool "Support for minimum PMEM resource"
-	default y
-	depends on MIN_RUNTIME_RESOURCES
-	help
-	  Enables support for the preallocated Memory resource.
-
-config MIN_RUNTIME_TFTP
-	bool "Support for minimum TFTP resource"
-	default y
-	depends on MIN_RUNTIME_RESOURCES
-	help
-	  Enables support for the preallocated TFTP resource.
diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c
index 726bc2e..d7ecbae 100644
--- a/arch/mips/powertv/pci/fixup-powertv.c
+++ b/arch/mips/powertv/pci/fixup-powertv.c
@@ -1,4 +1,5 @@
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <asm/mach-powertv/interrupts.h>
 #include "powertv-pci.h"
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
index 6ac85cf..b0e2afa 100644
--- a/arch/mips/powertv/powertv-usb.c
+++ b/arch/mips/powertv/powertv-usb.c
@@ -29,6 +29,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <asm/mach-powertv/asic.h>
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 6c47dfe..6ec41df 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
index 50f530f..d0c64e7 100644
--- a/arch/mips/rb532/setup.c
+++ b/arch/mips/rb532/setup.c
@@ -3,6 +3,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index b18b04e..f90dce3 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -337,12 +337,12 @@
 	.irq_unmask	= enable_bridge_irq,
 };
 
-void __devinit register_bridge_irq(unsigned int irq)
+void register_bridge_irq(unsigned int irq)
 {
 	irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
 }
 
-int __devinit request_bridge_irq(struct bridge_controller *bc)
+int request_bridge_irq(struct bridge_controller *bc)
 {
 	int irq = allocate_irqno();
 	int swlevel, cpu;
diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c
index 103abc1..3dbad99 100644
--- a/arch/mips/txx9/generic/spi_eeprom.c
+++ b/arch/mips/txx9/generic/spi_eeprom.c
@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 7dc0faf..2ad8973 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/interrupt.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 22cc6f2..b32b3bc 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -19,6 +19,7 @@
  */
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index ebc5dcf..76e3e8a 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -19,6 +19,7 @@
  */
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 9460e1c..e518a5a 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -19,9 +19,6 @@
 config MMU
 	def_bool y
 
-config WISHBONE_BUS_BIG_ENDIAN
-	def_bool y
-
 config SYMBOL_PREFIX
         string
         default ""
@@ -160,15 +157,6 @@
 
 	  Say Y if you are unsure.
 
-config OPENRISC_EXCEPTION_DEBUG
-	bool "Print processor state at each exception"
-	default n
-	help
-	  This option will make your kernel unusable for all but kernel
-	  debugging.
-
-	  Say N if you are unsure.
-
 config OPENRISC_ESR_EXCEPTION_BUG_CHECK
 	bool "Check for possible ESR exception bug"
 	default n
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 994bcd9..5709c5e 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/pdc.h>
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index d047ede..d87d1c4 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -26,6 +26,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/scatterlist.h>
+#include <linux/export.h>
 
 #include <asm/cacheflush.h>
 #include <asm/dma.h>    /* for DMA_CHUNK_SIZE */
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index cb71f3d..a3328c2 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -35,6 +35,7 @@
 #include <linux/pci.h>
 #undef PCI_DEBUG
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/pdc.h>
diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c
index 5069e8b..8f470c9 100644
--- a/arch/parisc/lib/iomap.c
+++ b/arch/parisc/lib/iomap.c
@@ -5,6 +5,7 @@
 
 #include <linux/ioport.h>
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/io.h>
 
 /*
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 47682b6..951e18f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -323,7 +323,7 @@
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
@@ -345,7 +345,7 @@
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -379,10 +379,6 @@
 
 	  If unsure, say "N"
 
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
 	depends on SMP && !MV64360
@@ -429,8 +425,7 @@
 	def_bool y
 
 config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on PPC_BOOK3S_64
+	bool
 
 source "mm/Kconfig"
 
@@ -746,24 +741,6 @@
 	depends on PCI_8260 && !8272
 	default y
 
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 067cb84..1b8a9c9 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -141,9 +141,6 @@
 
 config PPC_EARLY_DEBUG
 	bool "Early debugging (dangerous)"
-	# PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
-	# mark, which doesn't work with current 440 KVM.
-	depends on !KVM
 	help
 	  Say Y to enable some early debugging facilities that may be available
 	  for your processor/board combination. Those facilities are hacks
@@ -222,7 +219,9 @@
 
 config PPC_EARLY_DEBUG_44x
 	bool "Early serial debugging for IBM/AMCC 44x CPUs"
-	depends on 44x
+	# PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
+	# mark, which doesn't work with current 440 KVM.
+	depends on 44x && !KVM
 	help
 	  Select this to enable early debugging for IBM 44x chips via the
 	  inbuilt serial port.  If you enable this, ensure you set
@@ -258,8 +257,35 @@
 	depends on PPC_WSP
 	select PPC_UDBG_16550
 
+config PPC_EARLY_DEBUG_PS3GELIC
+	bool "Early debugging through the PS3 Ethernet port"
+	depends on PPC_PS3
+	select PS3GELIC_UDBG
+	help
+	  Select this to enable early debugging for the PlayStation3 via
+	  UDP broadcasts sent out through the Ethernet port.
+
+config PPC_EARLY_DEBUG_OPAL_RAW
+	bool "OPAL raw console"
+	depends on HVC_OPAL
+	help
+	  Select this to enable early debugging for the PowerNV platform
+	  using a "raw" console
+
+config PPC_EARLY_DEBUG_OPAL_HVSI
+	bool "OPAL hvsi console"
+	depends on HVC_OPAL
+	help
+	  Select this to enable early debugging for the PowerNV platform
+	  using an "hvsi" console
+
 endchoice
 
+config PPC_EARLY_DEBUG_OPAL
+	def_bool y
+	depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI
+
+
 config PPC_EARLY_DEBUG_HVSI_VTERMNO
 	hex "vterm number to use with early debug HVSI"
 	depends on PPC_EARLY_DEBUG_LPAR_HVSI
@@ -268,6 +294,18 @@
 	  You probably want 0x30000000 for your first serial port and
 	  0x30000001 for your second one
 
+config PPC_EARLY_DEBUG_OPAL_VTERMNO
+	hex "vterm number to use with OPAL early debug"
+	depends on PPC_EARLY_DEBUG_OPAL
+	default "0"
+	help
+	  This correspond to which /dev/hvcN you want to use for early
+	  debug.
+
+	  On OPAL v1 (takeover) this should always be 0
+	  On OPAL v2, this will be 0 for network console and 1 or 2 for
+	  the machine built-in serial ports.
+
 config PPC_EARLY_DEBUG_44x_PHYSLOW
 	hex "Low 32 bits of early debug UART physical address"
 	depends on PPC_EARLY_DEBUG_44x
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 57af16e..70ba0c0 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -255,12 +255,6 @@
 		echo 'disable kernel modules' ; \
 		false ; \
 	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
 
 CLEAN_FILES += $(TOUT)
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index c26200b..72ee8c1 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -58,7 +58,7 @@
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
@@ -171,6 +171,7 @@
 		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
+image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
new file mode 100644
index 0000000..0e00e50
--- /dev/null
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -0,0 +1,236 @@
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anon,charon";
+	compatible = "anon,charon";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			device_type = "dma-controller";
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			fixed-link = <1 1 100 0 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			dtt@28 {
+				compatible = "national,lm80";
+				reg = <0x28>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <	0 0 0xfc000000 0x02000000
+				1 0 0xe0000000 0x04000000 // CS1 range, SM501
+				3 0 0xe8000000 0x00080000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+		display@1,0 {
+			compatible = "smi,sm501";
+			reg = <1 0x00000000 0x00800000
+			       1 0x03e00000 0x00200000>;
+			mode = "640x480-32@60";
+			interrupts = <1 1 3>;
+			little-endian;
+		};
+
+		mram0@3,0 {
+			compatible = "mtd-ram";
+			reg = <3 0x00000 0x80000>;
+			bank-width = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 27bd267..a7511f2 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -23,19 +23,26 @@
 
 	soc5200@f0000000 {
 		timer@600 {	// General Purpose Timer
+			#gpio-cells = <2>;
 			fsl,has-wdt;
+			gpio-controller;
+		};
+
+		timer@610 {
+			#gpio-cells = <2>;
+			gpio-controller;
 		};
 
 		rtc@800 {
 			status = "disabled";
 		};
 
-		can@900 {
-			status = "disabled";
-		};
-
-		can@980 {
-			status = "disabled";
+		spi@f00 {
+			msp430@0 {
+				compatible = "spidev";
+				spi-max-frequency = <32000>;
+				reg = <0>;
+			};
 		};
 
 		psc@2000 {		// PSC1
@@ -73,11 +80,16 @@
 		};
 
 		i2c@3d00 {
-			rtc@50 {
+			eeprom@50 {
 				compatible = "at,24c08";
 				reg = <0x50>;
 			};
 
+			rtc@56 {
+				compatible = "mc,rv3029c2";
+				reg = <0x56>;
+			};
+
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
@@ -90,11 +102,22 @@
 	};
 
 	pci@f0000d00 {
-		status = "disabled";
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {
-		ranges = <0 0 0xff000000 0x1000000>;
+		ranges = <0 0 0xff000000 0x1000000
+			  4 0 0x60000000 0x0001000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
@@ -122,5 +145,25 @@
 				reg = <0x00f00000 0x100000>;
 			};
 		};
+
+		can@4,0 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x000 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>; // Level-low
+		};
+
+		can@4,100 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x100 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>;  // Level-low
+		};
+
+		serial@4,200 {
+			compatible = "nxp,sc28l92";
+			reg = <4 0x200 0x10>;
+			interrupts = <1 3 3>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 83f4b79..2266bbb 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -269,14 +269,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -290,25 +292,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index fc3a331..429e87d 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index c0671cc..d81201a 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -267,14 +267,16 @@
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
+			cell-index = <0>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			ranges = <0x0 0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupts = <29 2 30  2 34 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "gmii";
 
@@ -288,25 +290,48 @@
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x9 0x4>;
 					reg = <1>;
+					device_type = "ethernet-phy";
 				};
 				phy2: ethernet-phy@2 {
 					interrupt-parent = <&gef_pic>;
 					interrupts = <0x8 0x4>;
 					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
 				};
 			};
 		};
 
 		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
 			device_type = "network";
-			model = "eTSEC";
+			model = "TSEC";
 			compatible = "gianfar";
 			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "gmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
 		};
 
 		serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
deleted file mode 100644
index 7988598..0000000
--- a/arch/powerpc/boot/dts/hcu4.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2.  This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	model = "netstal,hcu4";
-	compatible = "netstal,hcu4";
-	dcr-parent = <0x1>;
-
-	aliases {
-		ethernet0 = "/plb/opb/ethernet@ef600800";
-		serial0 = "/plb/opb/serial@ef600300";
-	};
-
-	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GPr";
-			reg = <0x0>;
-			clock-frequency = <0>;		/* Filled in by U-Boot */
-			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-			linux,phandle = <0x1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	/* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0x0>;
-		dcr-reg = <0xc0 0x9>;
-		#address-cells = <0x0>;
-		#size-cells = <0x0>;
-		#interrupt-cells = <0x2>;
-		linux,phandle = <0x2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x10 0x2>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <0x1>;
-			num-rx-chans = <0x1>;
-			interrupt-parent = <0x2>;
-			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
-			linux,phandle = <0x3>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges = <0xef600000 0xef600000 0xa00000>;
-			dcr-reg = <0xa0 0x5>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0x0>;/* Filled in by U-Boot */
-				current-speed = <0>;	/* Filled in by U-Boot */
-				interrupt-parent = <0x2>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <0x2>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x20>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <0x2>;
-				interrupts = <0xf 0x4 0x9 0x4>;
-				local-mac-address = [00 00 00 00 00 00];
-				reg = <0xef600800 0x70>;
-				mal-device = <0x3>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0x0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <0x1>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			sram@0,0 {
-				reg = <0x0 0x0 0x80000>;
-			};
-
-			flash@0,80000 {
-				compatible = "jedec-flash";
-				bank-width = <0x1>;
-				reg = <0x0 0x80000 0x80000>;
-				#address-cells = <0x1>;
-				#size-cells = <0x1>;
-
-				partition@0 {
-					label = "OpenBIOS";
-					reg = <0x0 0x80000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index bdb7fc0..296c572 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -306,7 +306,7 @@
 	localbus@fdf05000 {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		reg = <0xfdf05000 0x68>;
 
 		ranges = <0x0 0x0 0xe0000000 0x00800000
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 1360d2f..ededaf5 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -213,6 +213,15 @@
 				linux,network-index = <2>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				mode = "peripheral";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				usb-clock = <5>;
+			};
 		};
 
 		cpm2_pio_c: gpio-controller@10d40 {
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index bc27548..7ab286a 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -147,6 +147,8 @@
 		};
 
 		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <0xf00 0x20>;
 			interrupts = <2 13 0 2 14 0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index b53d1df..505dc84 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -390,7 +390,8 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349e-localbus",
-			     "fsl,pq2pro-localbus";
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
 		reg = <0xe0005000 0xd8>;
 		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
 			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 1be9743..b9b8719 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -150,7 +150,7 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p1022ds-pixis";
+			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
 			interrupt-parent = <&mpic>;
 			/*
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d9b7767..d3b4782 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -449,6 +449,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1
@@ -488,11 +489,15 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 1
-				0000 0 0 2 &mpic 5 1
-				0000 0 0 3 &mpic 6 1
+				0000 0 0 1 &mpic 4 2
+				0000 0 0 2 &mpic 5 2
+				0000 0 0 3 &mpic 6 2
 				0000 0 0 4 &mpic 7 1
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
@@ -527,12 +532,16 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1
 				0000 0 0 2 &mpic 9 1
 				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 1
+				0000 0 0 4 &mpic 11 2
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index dae4031..66f03d6 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -118,6 +118,11 @@
 			};
 		};
 
+		board-control@3,0 {
+			compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <0x3 0x0 0x30>;
+		};
+
 		nand@4,0 {
 			compatible = "fsl,elbc-fcm-nand";
 			reg = <0x4 0x0 0x40000>;
diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/p2040rdb.dts
rename to arch/powerpc/boot/dts/p2041rdb.dts
index 7d84e39..79b6895 100644
--- a/arch/powerpc/boot/dts/p2040rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -1,5 +1,5 @@
 /*
- * P2040RDB Device Tree Source
+ * P2041RDB Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,11 +32,11 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2040si.dtsi"
+/include/ "p2041si.dtsi"
 
 / {
-	model = "fsl,P2040RDB";
-	compatible = "fsl,P2040RDB";
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -97,13 +101,8 @@
 			};
 		};
 
-		usb0: usb@210000 {
-			phy_type = "utmi";
-		};
-
 		usb1: usb@211000 {
 			dr_mode = "host";
-			phy_type = "utmi";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
similarity index 80%
rename from arch/powerpc/boot/dts/p2040si.dtsi
rename to arch/powerpc/boot/dts/p2041si.dtsi
index 5fdbb24..f7492ed 100644
--- a/arch/powerpc/boot/dts/p2040si.dtsi
+++ b/arch/powerpc/boot/dts/p2041si.dtsi
@@ -1,5 +1,5 @@
 /*
- * P2040 Silicon Device Tree Source
+ * P2041 Silicon Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,13 +35,14 @@
 /dts-v1/;
 
 / {
-	compatible = "fsl,P2040";
+	compatible = "fsl,P2041";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -109,6 +110,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -128,14 +197,14 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
 		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+			compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
 			reg = <0x10000 0x1000>;
 			interrupts = <16 2 1 27>;
 		};
@@ -226,7 +295,7 @@
 		};
 
 		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
+			compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
 			reg = <0xe1000 0x1000>;
 			clock-frequency = <0>;
 		};
@@ -238,45 +307,45 @@
 		};
 
 		sfp: sfp@e8000 {
-			compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
+			compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
 			reg	   = <0xe8000 0x1000>;
 		};
 
 		serdes: serdes@ea000 {
-			compatible = "fsl,p2040-serdes";
+			compatible = "fsl,p2041-serdes";
 			reg	   = <0xea000 0x1000>;
 		};
 
 		dma0: dma@100300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x100300 0x4>;
 			ranges = <0x0 0x100100 0x200>;
 			cell-index = <0>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <28 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <29 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <30 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -287,33 +356,33 @@
 		dma1: dma@101300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x101300 0x4>;
 			ranges = <0x0 0x101100 0x200>;
 			cell-index = <1>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <32 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <33 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <34 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -324,22 +393,20 @@
 		spi@110000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
+			compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
 			reg = <0x110000 0x1000>;
 			interrupts = <53 0x2 0 0>;
 			fsl,espi-num-chipselects = <4>;
-
 		};
 
 		sdhc: sdhc@114000 {
-			compatible = "fsl,p2040-esdhc", "fsl,esdhc";
+			compatible = "fsl,p2041-esdhc", "fsl,esdhc";
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2 0 0>;
 			sdhci,auto-cmd12;
 			clock-frequency = <0>;
 		};
 
-
 		i2c@118000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -417,7 +484,7 @@
 		};
 
 		gpio0: gpio@130000 {
-			compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
+			compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
 			reg = <0x130000 0x1000>;
 			interrupts = <55 2 0 0>;
 			#gpio-cells = <2>;
@@ -425,32 +492,34 @@
 		};
 
 		usb0: usb@210000 {
-			compatible = "fsl,p2040-usb2-mph",
+			compatible = "fsl,p2041-usb2-mph",
 					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
 			port0;
 		};
 
 		usb1: usb@211000 {
-			compatible = "fsl,p2040-usb2-dr",
+			compatible = "fsl,p2041-usb2-dr",
 					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			reg = <0x211000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <45 0x2 0 0>;
+			phy_type = "utmi";
 		};
 
 		sata@220000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x220000 0x1000>;
 			interrupts = <68 0x2 0 0>;
 		};
 
 		sata@221000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x221000 0x1000>;
 			interrupts = <69 0x2 0 0>;
 		};
@@ -534,19 +603,19 @@
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
+		compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
 		interrupts = <25 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <1>;
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi0>;
 		interrupts = <16 2 1 15>;
 		pcie@0 {
@@ -568,12 +637,12 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi1>;
 		interrupts = <16 2 1 14>;
 		pcie@0 {
@@ -595,12 +664,12 @@
 	};
 
 	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi2>;
 		interrupts = <16 2 1 13>;
 		pcie@0 {
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index 69cae67..bbd113b 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p3041ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
index 8b69580..87130b7 100644
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ b/arch/powerpc/boot/dts/p3041si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -114,6 +115,74 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +202,7 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p3060qds.dts
similarity index 62%
copy from arch/powerpc/boot/dts/p2040rdb.dts
copy to arch/powerpc/boot/dts/p3060qds.dts
index 7d84e39..08b9193 100644
--- a/arch/powerpc/boot/dts/p2040rdb.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -1,5 +1,5 @@
 /*
- * P2040RDB Device Tree Source
+ * P3060QDS Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,11 +32,11 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2040si.dtsi"
+/include/ "p3060si.dtsi"
 
 / {
-	model = "fsl,P2040RDB";
-	compatible = "fsl,P2040RDB";
+	model = "fsl,P3060QDS";
+	compatible = "fsl,P3060QDS";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -73,43 +77,83 @@
 					reg = <0x00700000 0x00900000>;
 				};
 			};
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,en25q32b";
+				reg = <1>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi1";
+					reg = <0x00000000 0x00400000>;
+				};
+			};
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at45db081d";
+				reg = <2>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi1 {
+					label = "spi2";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+			flash@3 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,sst25wf040";
+				reg = <3>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@spi3 {
+					label = "spi3";
+					reg = <0x00000000 0x00080000>;
+				};
+			};
 		};
 
 		i2c@118000 {
-			lm75b@48 {
-				compatible = "nxp,lm75a";
-				reg = <0x48>;
-			};
-			eeprom@50 {
+			eeprom@51 {
 				compatible = "at24,24c256";
-				reg = <0x50>;
+				reg = <0x51>;
+			};
+			eeprom@53 {
+				compatible = "at24,24c256";
+				reg = <0x53>;
 			};
 			rtc@68 {
-				compatible = "pericom,pt7c4338";
+				compatible = "dallas,ds3232";
 				reg = <0x68>;
-			};
-		};
-
-		i2c@118100 {
-			eeprom@50 {
-				compatible = "at24,24c256";
-				reg = <0x50>;
+				interrupts = <0x1 0x1 0 0>;
 			};
 		};
 
 		usb0: usb@210000 {
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		usb1: usb@211000 {
 			dr_mode = "host";
-			phy_type = "utmi";
+			phy_type = "ulpi";
+		};
+	};
+
+	rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 		};
 	};
 
 	localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -117,6 +161,49 @@
 			bank-width = <2>;
 			device-width = <2>;
 		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x100>;
+		};
 	};
 
 	pci0: pcie@ffe200000 {
@@ -148,19 +235,4 @@
 				  0 0x00010000>;
 		};
 	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
 };
diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
similarity index 65%
copy from arch/powerpc/boot/dts/p2040si.dtsi
copy to arch/powerpc/boot/dts/p3060si.dtsi
index 5fdbb24..68947e1 100644
--- a/arch/powerpc/boot/dts/p2040si.dtsi
+++ b/arch/powerpc/boot/dts/p3060si.dtsi
@@ -1,5 +1,5 @@
 /*
- * P2040 Silicon Device Tree Source
+ * P3060 Silicon Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,13 +35,14 @@
 /dts-v1/;
 
 / {
-	compatible = "fsl,P2040";
+	compatible = "fsl,P3060";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -49,12 +50,10 @@
 		serial3 = &serial3;
 		pci0 = &pci0;
 		pci1 = &pci1;
-		pci2 = &pci2;
 		usb0 = &usb0;
 		usb1 = &usb1;
 		dma0 = &dma0;
 		dma1 = &dma1;
-		sdhc = &sdhc;
 		msi0 = &msi0;
 		msi1 = &msi1;
 		msi2 = &msi2;
@@ -91,22 +90,116 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu2: PowerPC,e500mc@2 {
+		cpu4: PowerPC,e500mc@4 {
 			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu3: PowerPC,e500mc@3 {
+		cpu5: PowerPC,e500mc@5 {
 			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
 				next-level-cache = <&cpc>;
 			};
 		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
 	};
 
 	soc: soc@ffe000000 {
@@ -128,15 +221,16 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
-			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		ddr: memory-controller@8000 {
+			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
 		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-			reg = <0x10000 0x1000>;
+			compatible = "fsl,p3060-l3-cache-controller", "cache";
+			reg = <0x10000 0x1000
+			       0x11000 0x1000>;
 			interrupts = <16 2 1 27>;
 		};
 
@@ -150,7 +244,7 @@
 
 		iommu@20000 {
 			compatible = "fsl,pamu-v1.0", "fsl,pamu";
-			reg = <0x20000 0x4000>;
+			reg = <0x20000 0x5000>;
 			interrupts = <
 				24 2 0 0
 				16 2 1 30>;
@@ -211,6 +305,41 @@
 				0xf7 0 0 0>;
 		};
 
+		rmu: rmu@d3000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,srio-rmu";
+			reg = <0xd3000 0x500>;
+			ranges = <0x0 0xd3000 0x500>;
+
+			message-unit@0 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x0 0x100>;
+				interrupts = <
+					60 2 0 0  /* msg1_tx_irq */
+					61 2 0 0>;/* msg1_rx_irq */
+			};
+			message-unit@100 {
+				compatible = "fsl,srio-msg-unit";
+				reg = <0x100 0x100>;
+				interrupts = <
+					62 2 0 0  /* msg2_tx_irq */
+					63 2 0 0>;/* msg2_rx_irq */
+			};
+			doorbell-unit@400 {
+				compatible = "fsl,srio-dbell-unit";
+				reg = <0x400 0x80>;
+				interrupts = <
+					56 2 0 0  /* bell_outb_irq */
+					57 2 0 0>;/* bell_inb_irq */
+			};
+			port-write-unit@4e0 {
+				compatible = "fsl,srio-port-write-unit";
+				reg = <0x4e0 0x20>;
+				interrupts = <16 2 1 11>;
+			};
+		};
+
 		guts: global-utilities@e0000 {
 			compatible = "fsl,qoriq-device-config-1.0";
 			reg = <0xe0000 0xe00>;
@@ -226,7 +355,7 @@
 		};
 
 		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
+			compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
 			reg = <0xe1000 0x1000>;
 			clock-frequency = <0>;
 		};
@@ -238,45 +367,45 @@
 		};
 
 		sfp: sfp@e8000 {
-			compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
+			compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
 			reg	   = <0xe8000 0x1000>;
 		};
 
 		serdes: serdes@ea000 {
-			compatible = "fsl,p2040-serdes";
+			compatible = "fsl,p3060-serdes";
 			reg	   = <0xea000 0x1000>;
 		};
 
 		dma0: dma@100300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
 			reg = <0x100300 0x4>;
 			ranges = <0x0 0x100100 0x200>;
 			cell-index = <0>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <28 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <29 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <30 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -287,33 +416,33 @@
 		dma1: dma@101300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
 			reg = <0x101300 0x4>;
 			ranges = <0x0 0x101100 0x200>;
 			cell-index = <1>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <32 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <33 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <34 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p3060-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -324,22 +453,12 @@
 		spi@110000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
+			compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
 			reg = <0x110000 0x1000>;
 			interrupts = <53 0x2 0 0>;
 			fsl,espi-num-chipselects = <4>;
-
 		};
 
-		sdhc: sdhc@114000 {
-			compatible = "fsl,p2040-esdhc", "fsl,esdhc";
-			reg = <0x114000 0x1000>;
-			interrupts = <48 2 0 0>;
-			sdhci,auto-cmd12;
-			clock-frequency = <0>;
-		};
-
-
 		i2c@118000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -417,7 +536,7 @@
 		};
 
 		gpio0: gpio@130000 {
-			compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
+			compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
 			reg = <0x130000 0x1000>;
 			interrupts = <55 2 0 0>;
 			#gpio-cells = <2>;
@@ -425,17 +544,16 @@
 		};
 
 		usb0: usb@210000 {
-			compatible = "fsl,p2040-usb2-mph",
+			compatible = "fsl,p3060-usb2-mph",
 					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <44 0x2 0 0>;
-			port0;
 		};
 
 		usb1: usb@211000 {
-			compatible = "fsl,p2040-usb2-dr",
+			compatible = "fsl,p3060-usb2-dr",
 					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			reg = <0x211000 0x1000>;
 			#address-cells = <1>;
@@ -443,110 +561,115 @@
 			interrupts = <45 0x2 0 0>;
 		};
 
-		sata@220000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
-			reg = <0x220000 0x1000>;
-			interrupts = <68 0x2 0 0>;
-		};
-
-		sata@221000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
-			reg = <0x221000 0x1000>;
-			interrupts = <69 0x2 0 0>;
-		};
-
 		crypto: crypto@300000 {
-			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+			compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x300000 0x10000>;
 			ranges = <0 0x300000 0x10000>;
+			interrupt-parent = <&mpic>;
 			interrupts = <92 2 0 0>;
 
 			sec_jr0: jr@1000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
 				reg = <0x1000 0x1000>;
+				interrupt-parent = <&mpic>;
 				interrupts = <88 2 0 0>;
 			};
 
 			sec_jr1: jr@2000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
 				reg = <0x2000 0x1000>;
+				interrupt-parent = <&mpic>;
 				interrupts = <89 2 0 0>;
 			};
 
 			sec_jr2: jr@3000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
 				reg = <0x3000 0x1000>;
+				interrupt-parent = <&mpic>;
 				interrupts = <90 2 0 0>;
 			};
 
 			sec_jr3: jr@4000 {
-				compatible = "fsl,sec-v4.2-job-ring",
-					     "fsl,sec-v4.0-job-ring";
+				compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
 				reg = <0x4000 0x1000>;
+				interrupt-parent = <&mpic>;
 				interrupts = <91 2 0 0>;
 			};
 
 			rtic@6000 {
-				compatible = "fsl,sec-v4.2-rtic",
-					     "fsl,sec-v4.0-rtic";
+				compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x6000 0x100>;
 				ranges = <0x0 0x6100 0xe00>;
 
 				rtic_a: rtic-a@0 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
 					reg = <0x00 0x20 0x100 0x80>;
 				};
 
 				rtic_b: rtic-b@20 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
 					reg = <0x20 0x20 0x200 0x80>;
 				};
 
 				rtic_c: rtic-c@40 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
 					reg = <0x40 0x20 0x300 0x80>;
 				};
 
 				rtic_d: rtic-d@60 {
-					compatible = "fsl,sec-v4.2-rtic-memory",
-						     "fsl,sec-v4.0-rtic-memory";
+					compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
 					reg = <0x60 0x20 0x500 0x80>;
 				};
 			};
 		};
 
 		sec_mon: sec_mon@314000 {
-			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+			compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
 			reg = <0x314000 0x1000>;
+			interrupt-parent = <&mpic>;
 			interrupts = <93 2 0 0>;
 		};
+	};
 
+	rapidio@ffe0c0000 {
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <1>;
+		};
+
+		port2 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			cell-index = <2>;
+		};
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
+		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
 		interrupts = <25 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <1>;
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi0>;
 		interrupts = <16 2 1 15>;
 		pcie@0 {
@@ -568,12 +691,12 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi1>;
 		interrupts = <16 2 1 14>;
 		pcie@0 {
@@ -593,31 +716,4 @@
 				>;
 		};
 	};
-
-	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
-		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
-		fsl,msi = <&msi2>;
-		interrupts = <16 2 1 13>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			interrupts = <16 2 1 13>;
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 42 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 1 0 0
-				>;
-		};
-	};
 };
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index eb11098..c7916dc2 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -108,7 +112,8 @@
 
 	localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  3 0 0xf 0xffdf0000 0x00008000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -116,6 +121,11 @@
 			bank-width = <2>;
 			device-width = <2>;
 		};
+
+		board-control@3,0 {
+			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+		};
 	};
 
 	pci0: pcie@ffe200000 {
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
index b71051f5..f20c01a 100644
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ b/arch/powerpc/boot/dts/p4080si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -77,7 +78,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: PowerPC,4080@0 {
+		cpu0: PowerPC,e500mc@0 {
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2_0>;
@@ -85,7 +86,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu1: PowerPC,4080@1 {
+		cpu1: PowerPC,e500mc@1 {
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2_1>;
@@ -93,7 +94,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu2: PowerPC,4080@2 {
+		cpu2: PowerPC,e500mc@2 {
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2_2>;
@@ -101,7 +102,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu3: PowerPC,4080@3 {
+		cpu3: PowerPC,e500mc@3 {
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2_3>;
@@ -109,7 +110,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu4: PowerPC,4080@4 {
+		cpu4: PowerPC,e500mc@4 {
 			device_type = "cpu";
 			reg = <4>;
 			next-level-cache = <&L2_4>;
@@ -117,7 +118,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu5: PowerPC,4080@5 {
+		cpu5: PowerPC,e500mc@5 {
 			device_type = "cpu";
 			reg = <5>;
 			next-level-cache = <&L2_5>;
@@ -125,7 +126,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu6: PowerPC,4080@6 {
+		cpu6: PowerPC,e500mc@6 {
 			device_type = "cpu";
 			reg = <6>;
 			next-level-cache = <&L2_6>;
@@ -133,7 +134,7 @@
 				next-level-cache = <&cpc>;
 			};
 		};
-		cpu7: PowerPC,4080@7 {
+		cpu7: PowerPC,e500mc@7 {
 			device_type = "cpu";
 			reg = <7>;
 			next-level-cache = <&L2_7>;
@@ -143,6 +144,99 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@42000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu2>;
+			reg = <0x42000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@43000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu3>;
+			reg = <0x43000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@44000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu4>;
+			reg = <0x44000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@45000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu5>;
+			reg = <0x45000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@46000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu6>;
+			reg = <0x46000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@47000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu7>;
+			reg = <0x47000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -162,13 +256,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index 8366e2f..e6d4099 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -45,6 +45,10 @@
 		device_type = "memory";
 	};
 
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
 	soc: soc@ffe000000 {
 		spi@110000 {
 			flash@0 {
@@ -147,8 +151,8 @@
 		};
 
 		board-control@3,0 {
-			compatible = "fsl,p5020ds-pixis";
-			reg = <3 0 0x20>;
+			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
index 5e6048e..e7948ad 100644
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ b/arch/powerpc/boot/dts/p5020si.dtsi
@@ -42,6 +42,7 @@
 
 	aliases {
 		ccsr = &soc;
+		dcsr = &dcsr;
 
 		serial0 = &serial0;
 		serial1 = &serial1;
@@ -98,6 +99,69 @@
 		};
 	};
 
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+
+		dcsr-epu@0 {
+			compatible = "fsl,dcsr-epu";
+			interrupts = <52 2 0 0
+				      84 2 0 0
+				      85 2 0 0>;
+			interrupt-parent = <&mpic>;
+			reg = <0x0 0x1000>;
+		};
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+		dcsr-ocn@11000 {
+			compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+		dcsr-ddr@13000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr2>;
+			reg = <0x13000 0x1000>;
+		};
+		dcsr-nal@18000 {
+			compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+	};
+
 	soc: soc@ffe000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -117,13 +181,13 @@
 			fsl,num-laws = <32>;
 		};
 
-		memory-controller@8000 {
+		ddr1: memory-controller@8000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x8000 0x1000>;
 			interrupts = <16 2 1 23>;
 		};
 
-		memory-controller@9000 {
+		ddr2: memory-controller@9000 {
 			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
 			reg = <0x9000 0x1000>;
 			interrupts = <16 2 1 22>;
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 9e13ed8..72078eb 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -331,7 +331,7 @@
 	};
 
 	localbus@ff705000 {
-		compatible = "fsl,mpc8560-localbus";
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0xff705000 0x100>;	// BRx, ORx, etc.
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 6492324..30bb475 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -138,6 +138,42 @@
 				clock-frequency = <0>; /* Filled in by zImage */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
deleted file mode 100644
index dba263c..0000000
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_IBM_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 959cd2c..716a37b 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,9 +1,10 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
 # CONFIG_EPOLL is not set
@@ -17,7 +18,6 @@
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -38,17 +38,18 @@
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
@@ -56,13 +57,11 @@
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@@ -70,7 +69,13 @@
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
 CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -80,10 +85,10 @@
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -102,7 +107,6 @@
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig
index 3ff5a81..c091aaf 100644
--- a/arch/powerpc/configs/85xx/p1023rds_defconfig
+++ b/arch/powerpc/configs/85xx/p1023rds_defconfig
@@ -24,7 +24,7 @@
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 5ea3124..1cd6fcb 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -20,7 +20,7 @@
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_XES_MPC85xx=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_MATH_EMULATION=y
 CONFIG_SPARSE_IRQ=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 4311d02..f087de6 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -12,9 +12,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
@@ -23,8 +21,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_P2040_RDB=y
+CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
+CONFIG_P3060_QDS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
 CONFIG_HIGHMEM=y
@@ -69,7 +68,6 @@
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -107,7 +105,6 @@
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -136,8 +133,6 @@
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
@@ -146,7 +141,6 @@
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_VIRT_DRIVERS=y
 CONFIG_FSL_HV_MANAGER=y
 CONFIG_EXT2_FS=y
@@ -173,7 +167,6 @@
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index c92c204..782822c 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -11,10 +11,8 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -25,7 +23,6 @@
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
-# CONFIG_PCI is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -93,10 +90,8 @@
 CONFIG_CRC_ITU_T=m
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 6cb588a..0d36b0e 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,15 +1,22 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
+# CONFIG_RD_GZIP is not set
 CONFIG_KALLSYMS_ALL=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_PPC_PMAC is not set
 CONFIG_PPC_82xx=y
 CONFIG_MGCOGE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_SECCOMP is not set
 CONFIG_NET=y
@@ -24,11 +31,10 @@
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
+CONFIG_TIPC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
@@ -42,7 +48,6 @@
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -50,6 +55,7 @@
 CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -57,24 +63,24 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_POWERMAC is not set
 CONFIG_I2C_CPM=y
 # CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
+CONFIG_USB_G_SERIAL=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MAC_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -82,7 +88,6 @@
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index c02bbb2..211fcc9 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -1,9 +1,9 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -13,10 +13,11 @@
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
 CONFIG_MPC5121_ADS=y
+CONFIG_MPC5121_GENERIC=y
+CONFIG_PDM360NG=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_NO_HZ=y
 CONFIG_HZ_1000=y
-CONFIG_SPARSE_IRQ=y
 # CONFIG_MIGRATION is not set
 # CONFIG_SECCOMP is not set
 # CONFIG_PCI is not set
@@ -35,18 +36,16 @@
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
 CONFIG_CAN_MSCAN=y
 CONFIG_CAN_DEBUG_DEVICES=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -63,6 +62,7 @@
 CONFIG_BLK_DEV_XIP=y
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -99,10 +99,14 @@
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_MPC512x_PSC=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_ADV_DEBUG=y
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
 CONFIG_VIDEO_SAA711X=y
@@ -132,6 +136,5 @@
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index e63f537..2a1320f 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -88,6 +88,18 @@
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_MPC5200_I2S=y
+CONFIG_SND_MPC52xx_SOC_PCM030=y
+CONFIG_SND_MPC52xx_SOC_EFIKA=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a3467bf..a1e5a17 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -10,10 +10,8 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -41,7 +39,6 @@
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -123,6 +120,7 @@
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -206,7 +204,6 @@
 CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 9693f6e..dd1e413 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -12,10 +12,8 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -42,7 +40,6 @@
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -124,6 +121,7 @@
 CONFIG_I2C=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_MPC8XXX=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -207,10 +205,8 @@
 CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 7cb703b..1eb19ac 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -14,7 +14,6 @@
 CONFIG_PPC4xx_GPIO=y
 CONFIG_ACADIA=y
 CONFIG_EP405=y
-CONFIG_HCU4=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 6cdf1c0..3b98d73 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -52,6 +52,8 @@
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_NDFC=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_PROC_DEVICETREE=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 84a685a5..535711f 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -485,3 +485,7 @@
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 04360f9..c47f2be 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -70,7 +70,7 @@
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_PPC_BESTCOMM=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_MCU_MPC8349EMITX=m
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 96a58b7..a72f241 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -362,3 +362,7 @@
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index e2a4c26..02e41b5 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -49,13 +49,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@
 	int t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -226,7 +226,7 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -234,7 +234,7 @@
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -285,12 +285,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -319,12 +319,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -351,12 +351,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -393,12 +393,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -418,13 +418,13 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -450,14 +450,14 @@
 	long t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index e137afc..efdc926 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -124,14 +124,14 @@
 	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 DEFINE_TESTOP(test_and_set_bits_lock, or, "",
 	      PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 16d25c0..d57c08a 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -37,4 +37,6 @@
 	u64 dma_mask;
 };
 
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 3a6c586..14db29b 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -48,6 +48,8 @@
 #define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
+#define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
+#define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
 
 #ifndef __ASSEMBLY__
 
@@ -65,6 +67,8 @@
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
+	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
@@ -78,6 +82,9 @@
 #ifdef CONFIG_PPC_ISERIES
 		FW_FEATURE_ISERIES_POSSIBLE |
 #endif
+#ifdef CONFIG_PPC_POWERNV
+		FW_FEATURE_POWERNV_POSSIBLE |
+#endif
 #ifdef CONFIG_PPC_PS3
 		FW_FEATURE_PS3_POSSIBLE |
 #endif
@@ -95,6 +102,9 @@
 #ifdef CONFIG_PPC_ISERIES
 		FW_FEATURE_ISERIES_ALWAYS &
 #endif
+#ifdef CONFIG_PPC_POWERNV
+		FW_FEATURE_POWERNV_ALWAYS &
+#endif
 #ifdef CONFIG_PPC_PS3
 		FW_FEATURE_PS3_ALWAYS &
 #endif
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
index 24bd34c..936a904 100644
--- a/arch/powerpc/include/asm/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
@@ -108,10 +108,10 @@
 {
 	if (can_use_virtual_dma)
 		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", NULL);
+				   0, "floppy", NULL);
 	else
 		return request_irq(FLOPPY_IRQ, floppy_interrupt,
-				   IRQF_DISABLED, "floppy", NULL);
+				   0, "floppy", NULL);
 }
 
 static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index c94e4a3..2a9cf84 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -11,12 +11,13 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	PPC_RELEASE_BARRIER \
+	PPC_ATOMIC_ENTRY_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
 "2:	stwcx.	%1,0,%2\n" \
 	"bne-	1b\n" \
+	PPC_ATOMIC_EXIT_BARRIER \
 	"li	%1,0\n" \
 "3:	.section .fixup,\"ax\"\n" \
 "4:	li	%1,%3\n" \
@@ -92,14 +93,14 @@
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        PPC_RELEASE_BARRIER
+        PPC_ATOMIC_ENTRY_BARRIER
 "1:     lwarx   %1,0,%3         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%1,%4\n\
         bne-    3f\n"
         PPC405_ERR77(0,%3)
 "2:     stwcx.  %5,0,%3\n\
         bne-    1b\n"
-        PPC_ACQUIRE_BARRIER
+        PPC_ATOMIC_EXIT_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%6\n\
 	b	3b\n\
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 5856a66..8600493 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -1,15 +1,60 @@
 #ifndef _ASM_POWERPC_HUGETLB_H
 #define _ASM_POWERPC_HUGETLB_H
 
+#ifdef CONFIG_HUGETLB_PAGE
 #include <asm/page.h>
 
+extern struct kmem_cache *hugepte_cache;
+extern void __init reserve_hugetlb_gpages(void);
+
+static inline pte_t *hugepd_page(hugepd_t hpd)
+{
+	BUG_ON(!hugepd_ok(hpd));
+	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+	return hpd.pd & HUGEPD_SHIFT_MASK;
+}
+
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    unsigned pdshift)
+{
+	/*
+	 * On 32-bit, we have multiple higher-level table entries that point to
+	 * the same hugepte.  Just use the first one since they're all
+	 * identical.  So for that case, idx=0.
+	 */
+	unsigned long idx = 0;
+
+	pte_t *dir = hugepd_page(*hpdp);
+#ifdef CONFIG_PPC64
+	idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
+#endif
+
+	return dir + idx;
+}
+
 pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
 				 unsigned long addr, unsigned *shift);
 
 void flush_dcache_icache_hugepage(struct page *page);
 
+#if defined(CONFIG_PPC_MM_SLICES) || defined(CONFIG_PPC_SUBPAGE_PROT)
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 			   unsigned long len);
+#else
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len)
+{
+	return 0;
+}
+#endif
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 
 void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
@@ -50,8 +95,11 @@
 static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 					    unsigned long addr, pte_t *ptep)
 {
-	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
-	return __pte(old);
+#ifdef CONFIG_PPC64
+	return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+#else
+	return __pte(pte_update(ptep, ~0UL, 0));
+#endif
 }
 
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
@@ -93,4 +141,15 @@
 {
 }
 
+#else /* ! CONFIG_HUGETLB_PAGE */
+static inline void reserve_hugetlb_gpages(void)
+{
+	pr_err("Cannot reserve gpages without hugetlb enabled\n");
+}
+static inline void flush_hugetlb_page(struct vm_area_struct *vma,
+				      unsigned long vmaddr)
+{
+}
+#endif
+
 #endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 8a33698..f921eb1 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,7 +2,7 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
-#ifdef CONFIG_FSL_BOOKE
+#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x)
 
 /*
  * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index 08fe69e..0ad432b 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -149,12 +149,6 @@
 #define KVM_SREGS_E_UPDATE_DBSR		(1 << 3)
 
 /*
- * Book3S special bits to indicate contents in the struct by maintaining
- * backwards compatibility with older structs. If adding a new field,
- * please make sure to add a flag for that new field */
-#define KVM_SREGS_S_HIOR		(1 << 0)
-
-/*
  * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
  * previous KVM_GET_REGS.
  *
@@ -179,8 +173,6 @@
 				__u64 ibat[8]; 
 				__u64 dbat[8]; 
 			} ppc32;
-			__u64 flags; /* KVM_SREGS_S_ */
-			__u64 hior;
 		} s;
 		struct {
 			union {
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index a384ffd..d4df013 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -90,8 +90,6 @@
 #endif
 	int context_id[SID_CONTEXTS];
 
-	bool hior_sregs;		/* HIOR is set by SREGS, not PVR */
-
 	struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
 	struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
 	struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index 81713ac..f77c708 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -25,6 +25,7 @@
 #if !defined(__ASSEMBLY__)
 
 #include <linux/types.h>
+#include <linux/export.h>
 
 /* lv1 call declaration macros */
 
@@ -315,7 +316,7 @@
 LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
 LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
 LV1_CALL(gpu_context_intr,                              1, 1, 227 )
-LV1_CALL(gpu_attribute,                                 5, 0, 228 )
+LV1_CALL(gpu_attribute,                                 3, 0, 228 )
 LV1_CALL(get_rtc,                                       0, 2, 232 )
 LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
 LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 47cacddb..b540d6f 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -12,6 +12,7 @@
 #include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <asm/setup.h>
 
@@ -85,8 +86,9 @@
 	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
 	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
 
-	/* Platform set_dma_mask override */
+	/* Platform set_dma_mask and dma_get_required_mask overrides */
 	int		(*dma_set_mask)(struct device *dev, u64 dma_mask);
+	u64		(*dma_get_required_mask)(struct device *dev);
 
 	int		(*probe)(void);
 	void		(*setup_arch)(void); /* Optional, may be NULL */
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 3ea0f9a..0260ea5 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -66,6 +66,7 @@
 #define MAS2_M			0x00000004
 #define MAS2_G			0x00000002
 #define MAS2_E			0x00000001
+#define MAS2_WIMGE_MASK		0x0000001f
 #define MAS2_EPN_MASK(size)		(~0 << (size + 10))
 #define MAS2_VAL(addr, size, flags)	((addr) & MAS2_EPN_MASK(size) | (flags))
 
@@ -80,6 +81,7 @@
 #define MAS3_SW			0x00000004
 #define MAS3_UR			0x00000002
 #define MAS3_SR			0x00000001
+#define MAS3_BAP_MASK		0x0000003f
 #define MAS3_SPSIZE		0x0000003e
 #define MAS3_SPSIZE_SHIFT	1
 
@@ -212,6 +214,11 @@
 	unsigned int	id;
 	unsigned int	active;
 	unsigned long	vdso_base;
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 low_slices_psize;   /* SLB page size encodings */
+	u64 high_slices_psize;  /* 4 bits per slice for now */
+	u16 user_psize;         /* page size index */
+#endif
 } mm_context_t;
 
 /* Page size definitions, common between 32 and 64-bit
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index b445e0a..db645ec 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -262,8 +262,7 @@
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
-extern void add_gpage(unsigned long addr, unsigned long page_size,
-			  unsigned long number_of_pages);
+extern void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
 
 extern void hpte_init_native(void);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 698b306..f014552 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -175,14 +175,16 @@
 #define MMU_PAGE_64K_AP	3	/* "Admixed pages" (hash64 only) */
 #define MMU_PAGE_256K	4
 #define MMU_PAGE_1M	5
-#define MMU_PAGE_8M	6
-#define MMU_PAGE_16M	7
-#define MMU_PAGE_256M	8
-#define MMU_PAGE_1G	9
-#define MMU_PAGE_16G	10
-#define MMU_PAGE_64G	11
-#define MMU_PAGE_COUNT	12
+#define MMU_PAGE_4M	6
+#define MMU_PAGE_8M	7
+#define MMU_PAGE_16M	8
+#define MMU_PAGE_64M	9
+#define MMU_PAGE_256M	10
+#define MMU_PAGE_1G	11
+#define MMU_PAGE_16G	12
+#define MMU_PAGE_64G	13
 
+#define MMU_PAGE_COUNT	14
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index df18989..e6fae49 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -273,8 +273,6 @@
 	unsigned int		irq_count;
 	/* Number of sources */
 	unsigned int		num_sources;
-	/* Number of CPUs */
-	unsigned int		num_cpus;
 	/* default senses array */
 	unsigned char		*senses;
 	unsigned int		senses_count;
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
new file mode 100644
index 0000000..2893e8f
--- /dev/null
+++ b/arch/powerpc/include/asm/opal.h
@@ -0,0 +1,443 @@
+/*
+ * PowerNV OPAL definitions.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __OPAL_H
+#define __OPAL_H
+
+/****** Takeover interface ********/
+
+/* PAPR H-Call used to querty the HAL existence and/or instanciate
+ * it from within pHyp (tech preview only).
+ *
+ * This is exclusively used in prom_init.c
+ */
+
+#ifndef __ASSEMBLY__
+
+struct opal_takeover_args {
+	u64	k_image;		/* r4 */
+	u64	k_size;			/* r5 */
+	u64	k_entry;		/* r6 */
+	u64	k_entry2;		/* r7 */
+	u64	hal_addr;		/* r8 */
+	u64	rd_image;		/* r9 */
+	u64	rd_size;		/* r10 */
+	u64	rd_loc;			/* r11 */
+};
+
+extern long opal_query_takeover(u64 *hal_size, u64 *hal_align);
+
+extern long opal_do_takeover(struct opal_takeover_args *args);
+
+struct rtas_args;
+extern int opal_enter_rtas(struct rtas_args *args,
+			   unsigned long data,
+			   unsigned long entry);
+
+#endif /* __ASSEMBLY__ */
+
+/****** OPAL APIs ******/
+
+/* Return codes */
+#define OPAL_SUCCESS 		0
+#define OPAL_PARAMETER		-1
+#define OPAL_BUSY		-2
+#define OPAL_PARTIAL		-3
+#define OPAL_CONSTRAINED	-4
+#define OPAL_CLOSED		-5
+#define OPAL_HARDWARE		-6
+#define OPAL_UNSUPPORTED	-7
+#define OPAL_PERMISSION		-8
+#define OPAL_NO_MEM		-9
+#define OPAL_RESOURCE		-10
+#define OPAL_INTERNAL_ERROR	-11
+#define OPAL_BUSY_EVENT		-12
+#define OPAL_HARDWARE_FROZEN	-13
+
+/* API Tokens (in r0) */
+#define OPAL_CONSOLE_WRITE			1
+#define OPAL_CONSOLE_READ			2
+#define OPAL_RTC_READ				3
+#define OPAL_RTC_WRITE				4
+#define OPAL_CEC_POWER_DOWN			5
+#define OPAL_CEC_REBOOT				6
+#define OPAL_READ_NVRAM				7
+#define OPAL_WRITE_NVRAM			8
+#define OPAL_HANDLE_INTERRUPT			9
+#define OPAL_POLL_EVENTS			10
+#define OPAL_PCI_SET_HUB_TCE_MEMORY		11
+#define OPAL_PCI_SET_PHB_TCE_MEMORY		12
+#define OPAL_PCI_CONFIG_READ_BYTE		13
+#define OPAL_PCI_CONFIG_READ_HALF_WORD  	14
+#define OPAL_PCI_CONFIG_READ_WORD		15
+#define OPAL_PCI_CONFIG_WRITE_BYTE		16
+#define OPAL_PCI_CONFIG_WRITE_HALF_WORD		17
+#define OPAL_PCI_CONFIG_WRITE_WORD		18
+#define OPAL_SET_XIVE				19
+#define OPAL_GET_XIVE				20
+#define OPAL_GET_COMPLETION_TOKEN_STATUS	21 /* obsolete */
+#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER	22
+#define OPAL_PCI_EEH_FREEZE_STATUS		23
+#define OPAL_PCI_SHPC				24
+#define OPAL_CONSOLE_WRITE_BUFFER_SPACE		25
+#define OPAL_PCI_EEH_FREEZE_CLEAR		26
+#define OPAL_PCI_PHB_MMIO_ENABLE		27
+#define OPAL_PCI_SET_PHB_MEM_WINDOW		28
+#define OPAL_PCI_MAP_PE_MMIO_WINDOW		29
+#define OPAL_PCI_SET_PHB_TABLE_MEMORY		30
+#define OPAL_PCI_SET_PE				31
+#define OPAL_PCI_SET_PELTV			32
+#define OPAL_PCI_SET_MVE			33
+#define OPAL_PCI_SET_MVE_ENABLE			34
+#define OPAL_PCI_GET_XIVE_REISSUE		35
+#define OPAL_PCI_SET_XIVE_REISSUE		36
+#define OPAL_PCI_SET_XIVE_PE			37
+#define OPAL_GET_XIVE_SOURCE			38
+#define OPAL_GET_MSI_32				39
+#define OPAL_GET_MSI_64				40
+#define OPAL_START_CPU				41
+#define OPAL_QUERY_CPU_STATUS			42
+#define OPAL_WRITE_OPPANEL			43
+#define OPAL_PCI_MAP_PE_DMA_WINDOW		44
+#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL		45
+#define OPAL_PCI_RESET				49
+
+#ifndef __ASSEMBLY__
+
+/* Other enums */
+enum OpalVendorApiTokens {
+	OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
+};
+enum OpalFreezeState {
+	OPAL_EEH_STOPPED_NOT_FROZEN = 0,
+	OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
+	OPAL_EEH_STOPPED_DMA_FREEZE = 2,
+	OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
+	OPAL_EEH_STOPPED_RESET = 4,
+	OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
+	OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
+};
+enum OpalEehFreezeActionToken {
+	OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
+	OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
+	OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3
+};
+enum OpalPciStatusToken {
+	OPAL_EEH_PHB_NO_ERROR = 0,
+	OPAL_EEH_PHB_FATAL = 1,
+	OPAL_EEH_PHB_RECOVERABLE = 2,
+	OPAL_EEH_PHB_BUS_ERROR = 3,
+	OPAL_EEH_PCI_NO_DEVSEL = 4,
+	OPAL_EEH_PCI_TA = 5,
+	OPAL_EEH_PCIEX_UR = 6,
+	OPAL_EEH_PCIEX_CA = 7,
+	OPAL_EEH_PCI_MMIO_ERROR = 8,
+	OPAL_EEH_PCI_DMA_ERROR = 9
+};
+enum OpalShpcAction {
+	OPAL_SHPC_GET_LINK_STATE = 0,
+	OPAL_SHPC_GET_SLOT_STATE = 1
+};
+enum OpalShpcLinkState {
+	OPAL_SHPC_LINK_DOWN = 0,
+	OPAL_SHPC_LINK_UP = 1
+};
+enum OpalMmioWindowType {
+	OPAL_M32_WINDOW_TYPE = 1,
+	OPAL_M64_WINDOW_TYPE = 2,
+	OPAL_IO_WINDOW_TYPE = 3
+};
+enum OpalShpcSlotState {
+	OPAL_SHPC_DEV_NOT_PRESENT = 0,
+	OPAL_SHPC_DEV_PRESENT = 1
+};
+enum OpalExceptionHandler {
+	OPAL_MACHINE_CHECK_HANDLER = 1,
+	OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
+	OPAL_SOFTPATCH_HANDLER = 3
+};
+enum OpalPendingState {
+	OPAL_EVENT_OPAL_INTERNAL = 0x1,
+	OPAL_EVENT_NVRAM = 0x2,
+	OPAL_EVENT_RTC = 0x4,
+	OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
+	OPAL_EVENT_CONSOLE_INPUT = 0x10
+};
+
+/* Machine check related definitions */
+enum OpalMCE_Version {
+	OpalMCE_V1 = 1,
+};
+
+enum OpalMCE_Severity {
+	OpalMCE_SEV_NO_ERROR = 0,
+	OpalMCE_SEV_WARNING = 1,
+	OpalMCE_SEV_ERROR_SYNC = 2,
+	OpalMCE_SEV_FATAL = 3,
+};
+
+enum OpalMCE_Disposition {
+	OpalMCE_DISPOSITION_RECOVERED = 0,
+	OpalMCE_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalMCE_Initiator {
+	OpalMCE_INITIATOR_UNKNOWN = 0,
+	OpalMCE_INITIATOR_CPU = 1,
+};
+
+enum OpalMCE_ErrorType {
+	OpalMCE_ERROR_TYPE_UNKNOWN = 0,
+	OpalMCE_ERROR_TYPE_UE = 1,
+	OpalMCE_ERROR_TYPE_SLB = 2,
+	OpalMCE_ERROR_TYPE_ERAT = 3,
+	OpalMCE_ERROR_TYPE_TLB = 4,
+};
+
+enum OpalMCE_UeErrorType {
+	OpalMCE_UE_ERROR_INDETERMINATE = 0,
+	OpalMCE_UE_ERROR_IFETCH = 1,
+	OpalMCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2,
+	OpalMCE_UE_ERROR_LOAD_STORE = 3,
+	OpalMCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4,
+};
+
+enum OpalMCE_SlbErrorType {
+	OpalMCE_SLB_ERROR_INDETERMINATE = 0,
+	OpalMCE_SLB_ERROR_PARITY = 1,
+	OpalMCE_SLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_EratErrorType {
+	OpalMCE_ERAT_ERROR_INDETERMINATE = 0,
+	OpalMCE_ERAT_ERROR_PARITY = 1,
+	OpalMCE_ERAT_ERROR_MULTIHIT = 2,
+};
+
+enum OpalMCE_TlbErrorType {
+	OpalMCE_TLB_ERROR_INDETERMINATE = 0,
+	OpalMCE_TLB_ERROR_PARITY = 1,
+	OpalMCE_TLB_ERROR_MULTIHIT = 2,
+};
+
+enum OpalThreadStatus {
+	OPAL_THREAD_INACTIVE = 0x0,
+	OPAL_THREAD_STARTED = 0x1
+};
+
+enum OpalPciBusCompare {
+	OpalPciBusAny	= 0,	/* Any bus number match */
+	OpalPciBus3Bits	= 2,	/* Match top 3 bits of bus number */
+	OpalPciBus4Bits	= 3,	/* Match top 4 bits of bus number */
+	OpalPciBus5Bits	= 4,	/* Match top 5 bits of bus number */
+	OpalPciBus6Bits	= 5,	/* Match top 6 bits of bus number */
+	OpalPciBus7Bits	= 6,	/* Match top 7 bits of bus number */
+	OpalPciBusAll	= 7,	/* Match bus number exactly */
+};
+
+enum OpalDeviceCompare {
+	OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
+	OPAL_COMPARE_RID_DEVICE_NUMBER = 1
+};
+
+enum OpalFuncCompare {
+	OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
+	OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
+};
+
+enum OpalPeAction {
+	OPAL_UNMAP_PE = 0,
+	OPAL_MAP_PE = 1
+};
+
+enum OpalPciResetAndReinitScope {
+	OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
+	OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
+	OPAL_PCI_IODA_RESET = 6,
+};
+
+enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+
+struct opal_machine_check_event {
+	enum OpalMCE_Version	version:8;	/* 0x00 */
+	uint8_t			in_use;		/* 0x01 */
+	enum OpalMCE_Severity	severity:8;	/* 0x02 */
+	enum OpalMCE_Initiator	initiator:8;	/* 0x03 */
+	enum OpalMCE_ErrorType	error_type:8;	/* 0x04 */
+	enum OpalMCE_Disposition disposition:8; /* 0x05 */
+	uint8_t			reserved_1[2];	/* 0x06 */
+	uint64_t		gpr3;		/* 0x08 */
+	uint64_t		srr0;		/* 0x10 */
+	uint64_t		srr1;		/* 0x18 */
+	union {					/* 0x20 */
+		struct {
+			enum OpalMCE_UeErrorType ue_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		physical_address_provided;
+			uint8_t		reserved_1[5];
+			uint64_t	effective_address;
+			uint64_t	physical_address;
+			uint8_t		reserved_2[8];
+		} ue_error;
+
+		struct {
+			enum OpalMCE_SlbErrorType slb_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} slb_error;
+
+		struct {
+			enum OpalMCE_EratErrorType erat_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} erat_error;
+
+		struct {
+			enum OpalMCE_TlbErrorType tlb_error_type:8;
+			uint8_t		effective_address_provided;
+			uint8_t		reserved_1[6];
+			uint64_t	effective_address;
+			uint8_t		reserved_2[16];
+		} tlb_error;
+	} u;
+};
+
+typedef struct oppanel_line {
+	/* XXX */
+} oppanel_line_t;
+
+/* API functions */
+int64_t opal_console_write(int64_t term_number, int64_t *length,
+			   const uint8_t *buffer);
+int64_t opal_console_read(int64_t term_number, int64_t *length,
+			  uint8_t *buffer);
+int64_t opal_console_write_buffer_space(int64_t term_number,
+					int64_t *length);
+int64_t opal_rtc_read(uint32_t *year_month_day,
+		      uint64_t *hour_minute_second_millisecond);
+int64_t opal_rtc_write(uint32_t year_month_day,
+		       uint64_t hour_minute_second_millisecond);
+int64_t opal_cec_power_down(uint64_t request);
+int64_t opal_cec_reboot(void);
+int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset);
+int64_t opal_handle_interrupt(uint64_t isn, uint64_t *outstanding_event_mask);
+int64_t opal_poll_events(uint64_t *outstanding_event_mask);
+int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr,
+				    uint64_t tce_mem_size);
+int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr,
+				    uint64_t tce_mem_size);
+int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func,
+				  uint64_t offset, uint8_t *data);
+int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+				       uint64_t offset, uint16_t *data);
+int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func,
+				  uint64_t offset, uint32_t *data);
+int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func,
+				   uint64_t offset, uint8_t data);
+int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
+					uint64_t offset, uint16_t data);
+int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
+				   uint64_t offset, uint32_t data);
+int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
+int64_t opal_get_xive(uint32_t isn, uint16_t *server, uint8_t *priority);
+int64_t opal_register_exception_handler(uint64_t opal_exception,
+					uint64_t handler_address,
+					uint64_t glue_cache_line);
+int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number,
+				   uint8_t *freeze_state,
+				   uint16_t *pci_error_type,
+				   uint64_t *phb_status);
+int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number,
+				  uint64_t eeh_action_token);
+int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state);
+
+
+
+int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type,
+				 uint16_t window_num, uint16_t enable);
+int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type,
+				    uint16_t window_num,
+				    uint64_t starting_real_address,
+				    uint64_t starting_pci_address,
+				    uint16_t segment_size);
+int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
+				    uint16_t window_type, uint16_t window_num,
+				    uint16_t segment_num);
+int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr,
+				      uint64_t ivt_addr, uint64_t ivt_len,
+				      uint64_t reject_array_addr,
+				      uint64_t peltv_addr);
+int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func,
+			uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare,
+			uint8_t pe_action);
+int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe,
+			   uint8_t state);
+int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number);
+int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number,
+				uint32_t state);
+int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+				  uint8_t *p_bit, uint8_t *q_bit);
+int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number,
+				  uint8_t p_bit, uint8_t q_bit);
+int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
+			     uint32_t xive_num);
+int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
+			     int32_t *interrupt_source_number);
+int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num,
+			uint8_t msi_range, uint32_t *msi_address,
+			uint32_t *message_data);
+int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number,
+			uint32_t xive_num, uint8_t msi_range,
+			uint64_t *msi_address, uint32_t *message_data);
+int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address);
+int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status);
+int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines);
+int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id,
+				   uint16_t tce_levels, uint64_t tce_table_addr,
+				   uint64_t tce_table_size, uint64_t tce_page_size);
+int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
+					uint16_t dma_window_number, uint64_t pci_start_addr,
+					uint64_t pci_mem_size);
+int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+/* Internal functions */
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
+				   int depth, void *data);
+
+extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
+extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
+
+extern void hvc_opal_init_early(void);
+
+struct rtc_time;
+extern int opal_set_rtc_time(struct rtc_time *tm);
+extern void opal_get_rtc_time(struct rtc_time *tm);
+extern unsigned long opal_get_boot_time(void);
+extern void opal_nvram_init(void);
+
+extern int opal_machine_check(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __OPAL_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 516bfb3..17722c7 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -43,6 +43,7 @@
 #define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
 
 struct task_struct;
+struct opal_machine_check_event;
 
 /*
  * Defines the layout of the paca.
@@ -135,6 +136,13 @@
 	u8 io_sync;			/* writel() needs spin_unlock sync */
 	u8 irq_work_pending;		/* IRQ_WORK interrupt while soft-disable */
 
+#ifdef CONFIG_PPC_POWERNV
+	/* Pointer to OPAL machine check event structure set by the
+	 * early exception handler for use by high level C handler
+	 */
+	struct opal_machine_check_event *opal_mc_evt;
+#endif
+
 	/* Stuff for accurate time accounting */
 	u64 user_time;			/* accumulated usermode TB ticks */
 	u64 system_time;		/* accumulated system TB ticks */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 2cd664e..dd9c4fd 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -36,6 +36,18 @@
 
 #define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		(MMU_PAGE_COUNT-1)
+#endif
+
 /* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
 #define __HAVE_ARCH_GATE_AREA		1
 
@@ -158,6 +170,24 @@
 #define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
 #endif
 
+/*
+ * Use the top bit of the higher-level page table entries to indicate whether
+ * the entries we point to contain hugepages.  This works because we know that
+ * the page tables live in kernel space.  If we ever decide to support having
+ * page tables at arbitrary addresses, this breaks and will have to change.
+ */
+#ifdef CONFIG_PPC64
+#define PD_HUGE 0x8000000000000000
+#else
+#define PD_HUGE 0x80000000
+#endif
+
+/*
+ * Some number of bits at the level of the page table that points to
+ * a hugepte are used to encode the size.  This masks those bits.
+ */
+#define HUGEPD_SHIFT_MASK     0x3f
+
 #ifndef __ASSEMBLY__
 
 #undef STRICT_MM_TYPECHECKS
@@ -243,7 +273,6 @@
 #endif
 
 typedef struct { signed long pd; } hugepd_t;
-#define HUGEPD_SHIFT_MASK     0x3f
 
 #ifdef CONFIG_HUGETLB_PAGE
 static inline int hugepd_ok(hugepd_t hpd)
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 9356262..fb40ede 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -64,17 +64,6 @@
 /* Log 2 of page table size */
 extern u64 ppc64_pft_size;
 
-/* Large pages size */
-#ifdef CONFIG_HUGETLB_PAGE
-extern unsigned int HPAGE_SHIFT;
-#else
-#define HPAGE_SHIFT PAGE_SHIFT
-#endif
-#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE		(MMU_PAGE_COUNT-1)
-
 #endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_PPC_MM_SLICES
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index 082d515..0156702 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -72,6 +72,9 @@
 #define	PTE_RPN_SHIFT	(24)
 #endif
 
+#define PTE_WIMGE_SHIFT (19)
+#define PTE_BAP_SHIFT	(2)
+
 /* On 32-bit, we never clear the top part of the PTE */
 #ifdef CONFIG_PPC32
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 9ec0b39..03c48e8 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -31,7 +31,7 @@
 
 #define MSR_		MSR_ME | MSR_CE
 #define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
 #define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
@@ -548,6 +548,9 @@
 #define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
 #define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
 
+/* Bit definitions for L1CSR2. */
+#define L1CSR2_DCWS	0x40000000	/* Data Cache write shadow */
+
 /* Bit definitions for L2CSR0. */
 #define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
 #define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 58625d1..41f69ae 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -249,10 +249,12 @@
 #define ERR_FLAG_ALREADY_LOGGED	0x0
 #define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
 #define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
-#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from die()/panic() */
+#define ERR_TYPE_KERNEL_PANIC_GZ 0x8	/* ditto, compressed */
 
 /* All the types and not flags */
-#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+#define ERR_TYPE_MASK \
+	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ)
 
 #define RTAS_DEBUG KERN_DEBUG "RTAS: "
  
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 6fbce72..a0f358d 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -8,7 +8,7 @@
 
 #ifdef __powerpc64__
 
-extern char _end[];
+extern char __end_interrupts[];
 
 static inline int in_kernel_text(unsigned long addr)
 {
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 15a70b7..adba970 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -65,6 +65,7 @@
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 54a47ea..0c5fa31 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -16,7 +16,7 @@
 #endif /* CONFIG_SPARSEMEM */
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int create_section_mapping(unsigned long start, unsigned long end);
 extern int remove_section_mapping(unsigned long start, unsigned long end);
 #ifdef CONFIG_NUMA
 extern int hot_add_scn_to_nid(unsigned long scn_addr);
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
index 0c8b35d..4e360bd 100644
--- a/arch/powerpc/include/asm/spu.h
+++ b/arch/powerpc/include/asm/spu.h
@@ -26,6 +26,7 @@
 
 #include <linux/workqueue.h>
 #include <linux/sysdev.h>
+#include <linux/mutex.h>
 
 #define LS_SIZE (256 * 1024)
 #define LS_ADDR_MASK (LS_SIZE - 1)
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index d7cab44..e682a71 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -13,6 +13,7 @@
 extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
 extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
 			     void *fixup_end);
+extern void do_final_fixups(void);
 
 static inline void eieio(void)
 {
@@ -41,11 +42,15 @@
 	START_LWSYNC_SECTION(97);			\
 	isync;						\
 	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
-#define PPC_ACQUIRE_BARRIER	"\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
-#define PPC_RELEASE_BARRIER	stringify_in_c(LWSYNC) "\n"
+#define PPC_ACQUIRE_BARRIER	 "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER	 stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER	 "\n" stringify_in_c(sync) "\n"
 #else
 #define PPC_ACQUIRE_BARRIER
 #define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 7ef0d90..1e104af 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -19,14 +19,10 @@
 #define RECLAIM_DISTANCE 10
 
 /*
- * Before going off node we want the VM to try and reclaim from the local
- * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
- * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
- * 20, we never reclaim and go off node straight away.
- *
- * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ * Avoid creating an extra level of balancing (SD_ALLNODES) on the largest
+ * POWER7 boxes which have a maximum of 32 nodes.
  */
-#define RECLAIM_DISTANCE 10
+#define SD_NODES_PER_DOMAIN 32
 
 #include <asm/mmzone.h>
 
@@ -69,11 +65,11 @@
 	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
+				| 0*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_BALANCE_WAKE			\
-				| 0*SD_WAKE_AFFINE			\
+				| 1*SD_WAKE_AFFINE			\
 				| 0*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 5354ae9..8338aef 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -55,6 +55,9 @@
 extern void __init udbg_init_usbgecko(void);
 extern void __init udbg_init_wsp(void);
 extern void __init udbg_init_ehv_bc(void);
+extern void __init udbg_init_ps3gelic(void);
+extern void __init udbg_init_debug_opal_raw(void);
+extern void __init udbg_init_debug_opal_hvsi(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index b183a40..c48de98 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -15,8 +15,8 @@
 #define	DEFAULT_PRIORITY	5
 
 /*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
+ * Mark IPIs as higher priority so we can take them inside interrupts
+ * FIXME: still true now?
  */
 #define IPI_PRIORITY		4
 
@@ -27,10 +27,18 @@
 #define MAX_NUM_PRIORITIES	3
 
 /* Native ICP */
+#ifdef CONFIG_PPC_ICP_NATIVE
 extern int icp_native_init(void);
+#else
+static inline int icp_native_init(void) { return -ENODEV; }
+#endif
 
 /* PAPR ICP */
+#ifdef CONFIG_PPC_ICP_HV
 extern int icp_hv_init(void);
+#else
+static inline int icp_hv_init(void) { return -ENODEV; }
+#endif
 
 /* ICP ops */
 struct icp_ops {
@@ -51,7 +59,18 @@
 extern int ics_native_init(void);
 
 /* RTAS ICS */
+#ifdef CONFIG_PPC_ICS_RTAS
 extern int ics_rtas_init(void);
+#else
+static inline int ics_rtas_init(void) { return -ENODEV; }
+#endif
+
+/* HAL ICS */
+#ifdef CONFIG_PPC_POWERNV
+extern int ics_opal_init(void);
+#else
+static inline int ics_opal_init(void) { return -ENODEV; }
+#endif
 
 /* ICS instance, hooked up to chip_data of an irq */
 struct ics {
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 69f7ffe..7c5324f 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -49,6 +49,9 @@
 #ifdef CONFIG_PPC_ISERIES
 #include <asm/iseries/alpaca.h>
 #endif
+#ifdef CONFIG_PPC_POWERNV
+#include <asm/opal.h>
+#endif
 #if defined(CONFIG_KVM) || defined(CONFIG_KVM_GUEST)
 #include <linux/kvm_host.h>
 #endif
@@ -610,5 +613,12 @@
 					arch.timing_last_enter.tv32.tbl));
 #endif
 
+#ifdef CONFIG_PPC_POWERNV
+	DEFINE(OPAL_MC_GPR3, offsetof(struct opal_machine_check_event, gpr3));
+	DEFINE(OPAL_MC_SRR0, offsetof(struct opal_machine_check_event, srr0));
+	DEFINE(OPAL_MC_SRR1, offsetof(struct opal_machine_check_event, srr1));
+	DEFINE(PACA_OPAL_MC_EVT, offsetof(struct paca_struct, opal_mc_evt));
+#endif
+
 	return 0;
 }
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 60b3e37..ac8f527 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/memblock.h>
 
 #include <asm/sections.h>
diff --git a/arch/powerpc/kernel/clock.c b/arch/powerpc/kernel/clock.c
index ce668f5..a764b47 100644
--- a/arch/powerpc/kernel/clock.c
+++ b/arch/powerpc/kernel/clock.c
@@ -6,7 +6,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/clk_interface.h>
 
 struct clk_interface clk_functions;
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index fa44ff5..edae5bb 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -14,7 +14,7 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/oprofile_impl.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index cc6a9d5..d879809 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -17,6 +17,7 @@
 #include <linux/reboot.h>
 #include <linux/kexec.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/crash_dump.h>
 #include <linux/delay.h>
 #include <linux/elf.h>
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e755415..3f6464b 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -5,6 +5,7 @@
  * busses using the iommu infrastructure
  */
 
+#include <linux/export.h>
 #include <asm/iommu.h>
 
 /*
@@ -90,13 +91,27 @@
 		return 1;
 }
 
+static u64 dma_iommu_get_required_mask(struct device *dev)
+{
+	struct iommu_table *tbl = get_iommu_table_base(dev);
+	u64 mask;
+	if (!tbl)
+		return 0;
+
+	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 struct dma_map_ops dma_iommu_ops = {
-	.alloc_coherent	= dma_iommu_alloc_coherent,
-	.free_coherent	= dma_iommu_free_coherent,
-	.map_sg		= dma_iommu_map_sg,
-	.unmap_sg	= dma_iommu_unmap_sg,
-	.dma_supported	= dma_iommu_dma_supported,
-	.map_page	= dma_iommu_map_page,
-	.unmap_page	= dma_iommu_unmap_page,
+	.alloc_coherent		= dma_iommu_alloc_coherent,
+	.free_coherent		= dma_iommu_free_coherent,
+	.map_sg			= dma_iommu_map_sg,
+	.unmap_sg		= dma_iommu_unmap_sg,
+	.dma_supported		= dma_iommu_dma_supported,
+	.map_page		= dma_iommu_map_page,
+	.unmap_page		= dma_iommu_unmap_page,
+	.get_required_mask	= dma_iommu_get_required_mask,
 };
 EXPORT_SYMBOL(dma_iommu_ops);
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 4295e0b..1ebc918 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,6 +24,21 @@
 
 unsigned int ppc_swiotlb_enable;
 
+static u64 swiotlb_powerpc_get_required(struct device *dev)
+{
+	u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
+
+	end = memblock_end_of_DRAM();
+	if (max_direct_dma_addr && end > max_direct_dma_addr)
+		end = max_direct_dma_addr;
+	end += get_dma_offset(dev);
+
+	mask = 1ULL << (fls64(end) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -44,6 +59,7 @@
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
+	.get_required_mask = swiotlb_powerpc_get_required,
 };
 
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 4f0959f..7d0233c 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -10,6 +10,7 @@
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
+#include <linux/export.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 #include <asm/machdep.h>
@@ -96,6 +97,18 @@
 #endif
 }
 
+static u64 dma_direct_get_required_mask(struct device *dev)
+{
+	u64 end, mask;
+
+	end = memblock_end_of_DRAM() + get_dma_offset(dev);
+
+	mask = 1ULL << (fls64(end) - 1);
+	mask += mask - 1;
+
+	return mask;
+}
+
 static inline dma_addr_t dma_direct_map_page(struct device *dev,
 					     struct page *page,
 					     unsigned long offset,
@@ -137,13 +150,14 @@
 #endif
 
 struct dma_map_ops dma_direct_ops = {
-	.alloc_coherent	= dma_direct_alloc_coherent,
-	.free_coherent	= dma_direct_free_coherent,
-	.map_sg		= dma_direct_map_sg,
-	.unmap_sg	= dma_direct_unmap_sg,
-	.dma_supported	= dma_direct_dma_supported,
-	.map_page	= dma_direct_map_page,
-	.unmap_page	= dma_direct_unmap_page,
+	.alloc_coherent			= dma_direct_alloc_coherent,
+	.free_coherent			= dma_direct_free_coherent,
+	.map_sg				= dma_direct_map_sg,
+	.unmap_sg			= dma_direct_unmap_sg,
+	.dma_supported			= dma_direct_dma_supported,
+	.map_page			= dma_direct_map_page,
+	.unmap_page			= dma_direct_unmap_page,
+	.get_required_mask		= dma_direct_get_required_mask,
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	.sync_single_for_cpu 		= dma_direct_sync_single,
 	.sync_single_for_device 	= dma_direct_sync_single,
@@ -170,6 +184,23 @@
 }
 EXPORT_SYMBOL(dma_set_mask);
 
+u64 dma_get_required_mask(struct device *dev)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (ppc_md.dma_get_required_mask)
+		return ppc_md.dma_get_required_mask(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+
+	if (dma_ops->get_required_mask)
+		return dma_ops->get_required_mask(dev);
+
+	return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
 static int __init dma_init(void)
 {
        dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 56212bc..4f80cf1 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -215,7 +215,22 @@
 	stw	r9,8(r1)
 	stw	r11,12(r1)
 	stw	r3,ORIG_GPR3(r1)
+	/*
+	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+	 * If from user mode there is only one stack frame on the stack, and
+	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+	 * stack frame to make trace_hardirqs_off happy.
+	 */
+	andi.	r12,r12,MSR_PR
+	beq	11f
+	stwu	r1,-16(r1)
 	bl	trace_hardirqs_off
+	addi	r1,r1,16
+	b	12f
+
+11:
+	bl	trace_hardirqs_off
+12:
 	lwz	r0,GPR0(r1)
 	lwz	r3,ORIG_GPR3(r1)
 	lwz	r4,GPR4(r1)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 29ddd8b..cf9c69b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -267,7 +267,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
 #endif /* CONFIG_CBE_RAS */
 
 	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
@@ -275,7 +275,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
 #endif /* CONFIG_CBE_RAS */
 
 	STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
@@ -283,7 +283,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
 #endif /* CONFIG_CBE_RAS */
 
 	. = 0x3000
@@ -1133,7 +1133,7 @@
 	rfid
 	b	.	/* prevent speculative execution */
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * Data area reserved for FWNMI option.
  * This address (0x7000) is fixed by the RPA.
@@ -1141,7 +1141,7 @@
 	.= 0x7000
 	.globl fwnmi_data_area
 fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
 	/* iSeries does not use the FWNMI stuff, so it is safe to put
 	 * this here, even if we later allow kernels that will boot on
@@ -1166,9 +1166,12 @@
 
 #endif /* CONFIG_PPC_ISERIES */
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+	/* pseries and powernv need to keep the whole page from
+	 * 0x7000 to 0x8000 free for use by the firmware
+	 */
         . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
 /*
  * Space for CPU0's segment table.
@@ -1183,3 +1186,19 @@
 	.globl initial_stab
 initial_stab:
 	.space	4096
+#ifdef CONFIG_PPC_POWERNV
+_GLOBAL(opal_mc_secondary_handler)
+	HMT_MEDIUM
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
+	clrldi	r3,r3,2
+	tovirt(r3,r3)
+	std	r3,PACA_OPAL_MC_EVT(r13)
+	ld	r13,OPAL_MC_SRR0(r3)
+	mtspr	SPRN_SRR0,r13
+	ld	r13,OPAL_MC_SRR1(r3)
+	mtspr	SPRN_SRR1,r13
+	ld	r3,OPAL_MC_GPR3(r3)
+	GET_SCRATCH0(r13)
+	b	machine_check_pSeries
+#endif /* CONFIG_PPC_POWERNV */
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index 6b1f427..2eae447 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -13,7 +13,8 @@
  *  2 of the License, or (at your option) any later version.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/cache.h>
 
 #include <asm/firmware.h>
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ba250d5..0654dba 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -139,8 +139,7 @@
 	trap
 #endif /* CONFIG_PPC_PMAC */
 
-1:	mr	r31,r3			/* save parameters */
-	mr	r30,r4
+1:	mr	r31,r3			/* save device tree ptr */
 	li	r24,0			/* cpu # */
 
 /*
@@ -964,8 +963,8 @@
  * Do early platform-specific initialization,
  * and set up the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	__save_cpu_setup
 	bl	MMU_init
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index a91626d..872a6af 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -58,13 +58,7 @@
 _ENTRY(_stext);
 _ENTRY(_start);
 
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3			/* save device tree ptr */
 
 	/* We have to turn on the MMU right away so we get cache modes
 	 * set correctly.
@@ -849,11 +843,8 @@
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index f8e971b..b725dab 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -61,14 +61,7 @@
 	 * of abatron_pteptrs
 	 */
 	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3		/* save device tree ptr */
 	li	r24,0		/* CPU number */
 
 	bl	init_cpu_state
@@ -120,11 +113,8 @@
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 3564c49..06c7251 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -51,6 +51,11 @@
  *  For pSeries or server processors:
  *   1. The MMU is off & open firmware is running in real mode.
  *   2. The kernel is entered at __start
+ * -or- For OPAL entry:
+ *   1. The MMU is off, processor in HV mode, primary CPU enters at 0
+ *      with device-tree in gpr3. We also get OPAL base in r8 and
+ *	entry in r9 for debugging purposes
+ *   2. Secondary processors enter at 0x60 with PIR in gpr3
  *
  *  For iSeries:
  *   1. The MMU is on (as it always is for iSeries)
@@ -331,6 +336,11 @@
 	/* Save parameters */
 	mr	r31,r3
 	mr	r30,r4
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* Save OPAL entry */
+	mr	r28,r8
+	mr	r29,r9
+#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 	bl	.start_initialization_book3e
@@ -674,9 +684,9 @@
 _GLOBAL(relative_toc)
 	mflr	r0
 	bcl	20,31,$+4
-0:	mflr	r9
-	ld	r2,(p_toc - 0b)(r9)
-	add	r2,r2,r9
+0:	mflr	r11
+	ld	r2,(p_toc - 0b)(r11)
+	add	r2,r2,r11
 	mtlr	r0
 	blr
 
@@ -707,6 +717,12 @@
 	bdnz	3b
 4:
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* Setup OPAL entry */
+	std	r28,0(r11);
+	std	r29,8(r11);
+#endif
+
 #ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r6
 	ori	r6,r6,MSR_RI
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 1cbf64e..b68cb17 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -76,11 +76,7 @@
  */
 	.globl	__start
 __start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
+	mr	r31,r3			/* save device tree ptr */
 
 	/* We have to turn on the MMU right away so we get cache modes
 	 * set correctly.
@@ -723,11 +719,8 @@
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	li	r3,0
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 5084592..9f5d210 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -63,17 +63,30 @@
 	 * of abatron_pteptrs
 	 */
 	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r25,0		/* phys kernel start (low) */
-	li	r24,0		/* CPU number */
-	li	r23,0		/* phys kernel start (high) */
+
+	/* Translate device tree address to physical, save in r30/r31 */
+	mfmsr	r16
+	mfspr	r17,SPRN_PID
+	rlwinm	r17,r17,16,0x3fff0000	/* turn PID into MAS6[SPID] */
+	rlwimi	r17,r16,28,0x00000001	/* turn MSR[DS] into MAS6[SAS] */
+	mtspr	SPRN_MAS6,r17
+
+	tlbsx	0,r3			/* must succeed */
+
+	mfspr	r16,SPRN_MAS1
+	mfspr	r20,SPRN_MAS3
+	rlwinm	r17,r16,25,0x1f		/* r17 = log2(page size) */
+	li	r18,1024
+	slw	r18,r18,r17		/* r18 = page size */
+	addi	r18,r18,-1
+	and	r19,r3,r18		/* r19 = page offset */
+	andc	r31,r20,r18		/* r31 = page base */
+	or	r31,r31,r19		/* r31 = devtree phys addr */
+	mfspr	r30,SPRN_MAS7
+
+	li	r25,0			/* phys kernel start (low) */
+	li	r24,0			/* CPU number */
+	li	r23,0			/* phys kernel start (high) */
 
 /* We try to not make any assumptions about how the boot loader
  * setup or used the TLBs.  We invalidate all mappings from the
@@ -198,11 +211,8 @@
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
+	mr	r3,r30
+	mr	r4,r31
 	bl	machine_init
 	bl	MMU_init
 
@@ -236,8 +246,24 @@
  * if we find the pte (fall through):
  *   r11 is low pte word
  *   r12 is pointer to the pte
+ *   r10 is the pshift from the PGD, if we're a hugepage
  */
 #ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_HUGETLB_PAGE
+#define FIND_PTE	\
+	rlwinm	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
+	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
+	rlwinm.	r12, r11, 0, 0, 20;	/* Extract pt base address */	\
+	blt	1000f;			/* Normal non-huge page */	\
+	beq	2f;			/* Bail if no table */		\
+	oris	r11, r11, PD_HUGE@h;	/* Put back address bit */	\
+	andi.	r10, r11, HUGEPD_SHIFT_MASK@l; /* extract size field */	\
+	xor	r12, r10, r11;		/* drop size bits from pointer */ \
+	b	1001f;							\
+1000:	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
+	li	r10, 0;			/* clear r10 */			\
+1001:	lwz	r11, 4(r12);		/* Get pte entry */
+#else
 #define FIND_PTE	\
 	rlwinm	r12, r10, 13, 19, 29;	/* Compute pgdir/pmd offset */	\
 	lwzx	r11, r12, r11;		/* Get pgd/pmd entry */		\
@@ -245,7 +271,8 @@
 	beq	2f;			/* Bail if no table */		\
 	rlwimi	r12, r10, 23, 20, 28;	/* Compute pte address */	\
 	lwz	r11, 4(r12);		/* Get pte entry */
-#else
+#endif /* HUGEPAGE */
+#else /* !PTE_64BIT */
 #define FIND_PTE	\
 	rlwimi	r11, r10, 12, 20, 29;	/* Create L1 (pgdir/pmd) address */	\
 	lwz	r11, 0(r11);		/* Get L1 entry */			\
@@ -402,8 +429,8 @@
 
 #ifdef CONFIG_PTE_64BIT
 #ifdef CONFIG_SMP
-	subf	r10,r11,r12		/* create false data dep */
-	lwzx	r13,r11,r10		/* Get upper pte bits */
+	subf	r13,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r13		/* Get upper pte bits */
 #else
 	lwz	r13,0(r12)		/* Get upper pte bits */
 #endif
@@ -483,8 +510,8 @@
 
 #ifdef CONFIG_PTE_64BIT
 #ifdef CONFIG_SMP
-	subf	r10,r11,r12		/* create false data dep */
-	lwzx	r13,r11,r10		/* Get upper pte bits */
+	subf	r13,r11,r12		/* create false data dep */
+	lwzx	r13,r11,r13		/* Get upper pte bits */
 #else
 	lwz	r13,0(r12)		/* Get upper pte bits */
 #endif
@@ -548,7 +575,7 @@
 /*
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
- *	r10 - available to use
+ *	r10 - tsize encoding (if HUGETLB_PAGE) or available to use
  *	r11 - TLB (info from Linux PTE)
  *	r12 - available to use
  *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
@@ -558,21 +585,73 @@
  *	Upon exit, we reload everything and RFI.
  */
 finish_tlb_load:
+#ifdef CONFIG_HUGETLB_PAGE
+	cmpwi	6, r10, 0			/* check for huge page */
+	beq	6, finish_tlb_load_cont    	/* !huge */
+
+	/* Alas, we need more scratch registers for hugepages */
+	mfspr	r12, SPRN_SPRG_THREAD
+	stw	r14, THREAD_NORMSAVE(4)(r12)
+	stw	r15, THREAD_NORMSAVE(5)(r12)
+	stw	r16, THREAD_NORMSAVE(6)(r12)
+	stw	r17, THREAD_NORMSAVE(7)(r12)
+
+	/* Get the next_tlbcam_idx percpu var */
+#ifdef CONFIG_SMP
+	lwz	r12, THREAD_INFO-THREAD(r12)
+	lwz	r15, TI_CPU(r12)
+	lis     r14, __per_cpu_offset@h
+	ori     r14, r14, __per_cpu_offset@l
+	rlwinm  r15, r15, 2, 0, 29
+	lwzx    r16, r14, r15
+#else
+	li	r16, 0
+#endif
+	lis     r17, next_tlbcam_idx@h
+	ori	r17, r17, next_tlbcam_idx@l
+	add	r17, r17, r16			/* r17 = *next_tlbcam_idx */
+	lwz     r15, 0(r17)			/* r15 = next_tlbcam_idx */
+
+	lis	r14, MAS0_TLBSEL(1)@h		/* select TLB1 (TLBCAM) */
+	rlwimi	r14, r15, 16, 4, 15		/* next_tlbcam_idx entry */
+	mtspr	SPRN_MAS0, r14
+
+	/* Extract TLB1CFG(NENTRY) */
+	mfspr	r16, SPRN_TLB1CFG
+	andi.	r16, r16, 0xfff
+
+	/* Update next_tlbcam_idx, wrapping when necessary */
+	addi	r15, r15, 1
+	cmpw	r15, r16
+	blt 	100f
+	lis	r14, tlbcam_index@h
+	ori	r14, r14, tlbcam_index@l
+	lwz	r15, 0(r14)
+100:	stw	r15, 0(r17)
+
+	/*
+	 * Calc MAS1_TSIZE from r10 (which has pshift encoded)
+	 * tlb_enc = (pshift - 10).
+	 */
+	subi	r15, r10, 10
+	mfspr	r16, SPRN_MAS1
+	rlwimi	r16, r15, 7, 20, 24
+	mtspr	SPRN_MAS1, r16
+
+	/* copy the pshift for use later */
+	mr	r14, r10
+
+	/* fall through */
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
 	/*
 	 * We set execute, because we don't have the granularity to
 	 * properly set this at the page level (Linux problem).
 	 * Many of these bits are software only.  Bits we don't set
 	 * here we (properly should) assume have the appropriate value.
 	 */
-
-	mfspr	r12, SPRN_MAS2
-#ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
-#else
-	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
-#endif
-	mtspr	SPRN_MAS2, r12
-
+finish_tlb_load_cont:
 #ifdef CONFIG_PTE_64BIT
 	rlwinm	r12, r11, 32-2, 26, 31	/* Move in perm bits */
 	andi.	r10, r11, _PAGE_DIRTY
@@ -581,22 +660,40 @@
 	andc	r12, r12, r10
 1:	rlwimi	r12, r13, 20, 0, 11	/* grab RPN[32:43] */
 	rlwimi	r12, r11, 20, 12, 19	/* grab RPN[44:51] */
-	mtspr	SPRN_MAS3, r12
+2:	mtspr	SPRN_MAS3, r12
 BEGIN_MMU_FTR_SECTION
 	srwi	r10, r13, 12		/* grab RPN[12:31] */
 	mtspr	SPRN_MAS7, r10
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 #else
 	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
+	mr	r13, r11
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
 	slwi	r10, r12, 1
 	or	r10, r10, r12
 	iseleq	r12, r12, r10
-	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
-	mtspr	SPRN_MAS3, r11
+	rlwimi	r13, r12, 0, 20, 31	/* Get RPN from PTE, merge w/ perms */
+	mtspr	SPRN_MAS3, r13
 #endif
+
+	mfspr	r12, SPRN_MAS2
+#ifdef CONFIG_PTE_64BIT
+	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
+#else
+	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
+#endif
+#ifdef CONFIG_HUGETLB_PAGE
+	beq	6, 3f			/* don't mask if page isn't huge */
+	li	r13, 1
+	slw	r13, r13, r14
+	subi	r13, r13, 1
+	rlwinm	r13, r13, 0, 0, 19	/* bottom bits used for WIMGE/etc */
+	andc	r12, r12, r13		/* mask off ea bits within the page */
+#endif
+3:	mtspr	SPRN_MAS2, r12
+
 #ifdef CONFIG_E200
 	/* Round robin TLB1 entries assignment */
 	mfspr	r12, SPRN_MAS0
@@ -622,11 +719,19 @@
 	mtspr	SPRN_MAS0,r12
 #endif /* CONFIG_E200 */
 
+tlb_write_entry:
 	tlbwe
 
 	/* Done...restore registers and get out of here.  */
 	mfspr	r10, SPRN_SPRG_THREAD
-	lwz	r11, THREAD_NORMSAVE(3)(r10)
+#ifdef CONFIG_HUGETLB_PAGE
+	beq	6, 8f /* skip restore for 4k page faults */
+	lwz	r14, THREAD_NORMSAVE(4)(r10)
+	lwz	r15, THREAD_NORMSAVE(5)(r10)
+	lwz	r16, THREAD_NORMSAVE(6)(r10)
+	lwz	r17, THREAD_NORMSAVE(7)(r10)
+#endif
+8:	lwz	r11, THREAD_NORMSAVE(3)(r10)
 	mtcr	r11
 	lwz	r13, THREAD_NORMSAVE(2)(r10)
 	lwz	r12, THREAD_NORMSAVE(1)(r10)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 5ecd040..2bc0584 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -27,7 +27,6 @@
 #include <linux/kprobes.h>
 #include <linux/percpu.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/smp.h>
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 28581f1..d39ae60 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -37,12 +37,14 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/console.h>
 #include <linux/kobject.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/of_platform.h>
 #include <asm/ibmebus.h>
 #include <asm/abs_addr.h>
@@ -125,17 +127,23 @@
 
 static int ibmebus_dma_supported(struct device *dev, u64 mask)
 {
-	return 1;
+	return mask == DMA_BIT_MASK(64);
+}
+
+static u64 ibmebus_dma_get_required_mask(struct device *dev)
+{
+	return DMA_BIT_MASK(64);
 }
 
 static struct dma_map_ops ibmebus_dma_ops = {
-	.alloc_coherent = ibmebus_alloc_coherent,
-	.free_coherent  = ibmebus_free_coherent,
-	.map_sg         = ibmebus_map_sg,
-	.unmap_sg       = ibmebus_unmap_sg,
-	.dma_supported  = ibmebus_dma_supported,
-	.map_page       = ibmebus_map_page,
-	.unmap_page     = ibmebus_unmap_page,
+	.alloc_coherent     = ibmebus_alloc_coherent,
+	.free_coherent      = ibmebus_free_coherent,
+	.map_sg             = ibmebus_map_sg,
+	.unmap_sg           = ibmebus_unmap_sg,
+	.dma_supported      = ibmebus_dma_supported,
+	.get_required_mask  = ibmebus_dma_get_required_mask,
+	.map_page           = ibmebus_map_page,
+	.unmap_page         = ibmebus_unmap_page,
 };
 
 static int ibmebus_match_path(struct device *dev, void *data)
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 3e2b95c..4f0ab85 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -26,7 +26,7 @@
 	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
 	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
 
-#ifdef CONFIG_E500MC
+#ifdef CONFIG_PPC_E500MC
 	wrteei	1
 1:	wait
 
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 2375b7e..d076d46 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -1,5 +1,5 @@
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/init_task.h>
diff --git a/arch/powerpc/kernel/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
index ffafaea..12d329b 100644
--- a/arch/powerpc/kernel/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -12,6 +12,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/sched.h>	/* for init_mm */
 
 #include <asm/io.h>
 #include <asm/machdep.h>
diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c
index 8dc7547..886381f 100644
--- a/arch/powerpc/kernel/io.c
+++ b/arch/powerpc/kernel/io.c
@@ -19,7 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/io.h>
 #include <asm/firmware.h>
diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c
index b25f632..2627918 100644
--- a/arch/powerpc/kernel/iomap.c
+++ b/arch/powerpc/kernel/iomap.c
@@ -6,6 +6,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/mm.h>
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/pci-bridge.h>
 
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 961bb03..0cfcf98 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -501,6 +501,14 @@
 	tbl->it_map = page_address(page);
 	memset(tbl->it_map, 0, sz);
 
+	/*
+	 * Reserve page 0 so it will not be used for any mappings.
+	 * This avoids buggy drivers that consider page 0 to be invalid
+	 * to crash the machine or even lose data.
+	 */
+	if (tbl->it_offset == 0)
+		set_bit(0, tbl->it_map);
+
 	tbl->it_hint = 0;
 	tbl->it_largehint = tbl->it_halfpoint;
 	spin_lock_init(&tbl->it_lock);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index d281fb6..5c3c469 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -30,7 +30,7 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/threads.h>
 #include <linux/kernel_stat.h>
 #include <linux/signal.h>
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index 4d5731b..4797529 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/notifier.h>
diff --git a/arch/powerpc/kernel/jump_label.c b/arch/powerpc/kernel/jump_label.c
index 368d158..a1ed8a8 100644
--- a/arch/powerpc/kernel/jump_label.c
+++ b/arch/powerpc/kernel/jump_label.c
@@ -11,6 +11,7 @@
 #include <linux/jump_label.h>
 #include <asm/code-patching.h>
 
+#ifdef HAVE_JUMP_LABEL
 void arch_jump_label_transform(struct jump_entry *entry,
 			       enum jump_label_type type)
 {
@@ -21,3 +22,4 @@
 	else
 		patch_instruction(addr, PPC_INST_NOP);
 }
+#endif
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index b06bdae..2985338 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -20,6 +20,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/kvm_para.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -131,7 +132,6 @@
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 
-	extern u32 __end_interrupts;
 	if ((ulong)inst < (ulong)&__end_interrupts)
 		return;
 #endif
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 2b97b80..c7b5afe 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -6,6 +6,7 @@
 #include <linux/pci.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/serial_reg.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/prom.h>
@@ -47,6 +48,24 @@
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int tmp;
+	offset = offset << p->regshift;
+	if (offset == UART_IIR) {
+		tmp = readl(p->membase + (UART_IIR & ~3));
+		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+	} else
+		return readb(p->membase + offset);
+}
+
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+		writeb(value, p->membase + offset);
+}
+
 static int __init add_legacy_port(struct device_node *np, int want_index,
 				  int iotype, phys_addr_t base,
 				  phys_addr_t taddr, unsigned long irq,
@@ -102,6 +121,7 @@
 		legacy_serial_ports[index].iobase = base;
 	else
 		legacy_serial_ports[index].mapbase = base;
+
 	legacy_serial_ports[index].iotype = iotype;
 	legacy_serial_ports[index].uartclk = clock;
 	legacy_serial_ports[index].irq = irq;
@@ -112,6 +132,11 @@
 	legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
 	legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
+	if (iotype == UPIO_TSI) {
+		legacy_serial_ports[index].serial_in = tsi_serial_in;
+		legacy_serial_ports[index].serial_out = tsi_serial_out;
+	}
+
 	printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
 	       index, np->full_name);
 	printk(KERN_DEBUG "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 583af70..26ccbf7 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -74,8 +74,7 @@
 	}
 
 	/* We also should not overwrite the tce tables */
-	for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
-			node = of_find_node_by_type(node, "pci")) {
+	for_each_node_by_type(node, "pci") {
 		basep = of_get_property(node, "linux,tce-base", NULL);
 		sizep = of_get_property(node, "linux,tce-size", NULL);
 		if (basep == NULL || sizep == NULL)
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 998a100..7cd07b4 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -8,6 +8,8 @@
  * kexec bits:
  * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
  * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * PPC44x port. Copyright (C) 2011,  IBM Corporation
+ * 		Author: Suzuki Poulose <suzuki@in.ibm.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -736,6 +738,175 @@
 	mr      r5, r31
 
 	li	r0, 0
+#elif defined(CONFIG_44x)  && !defined(CONFIG_PPC_47x)
+
+/*
+ * Code for setting up 1:1 mapping for PPC440x for KEXEC
+ *
+ * We cannot switch off the MMU on PPC44x.
+ * So we:
+ * 1) Invalidate all the mappings except the one we are running from.
+ * 2) Create a tmp mapping for our code in the other address space(TS) and
+ *    jump to it. Invalidate the entry we started in.
+ * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
+ * 4) Jump to the 1:1 mapping in original TS.
+ * 5) Invalidate the tmp mapping.
+ *
+ * - Based on the kexec support code for FSL BookE
+ * - Doesn't support 47x yet.
+ *
+ */
+	/* Save our parameters */
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+	/* Load our MSR_IS and TID to MMUCR for TLB search */
+	mfspr	r3,SPRN_PID
+	mfmsr	r4
+	andi.	r4,r4,MSR_IS@l
+	beq	wmmucr
+	oris	r3,r3,PPC44x_MMUCR_STS@h
+wmmucr:
+	mtspr	SPRN_MMUCR,r3
+	sync
+
+	/*
+	 * Invalidate all the TLB entries except the current entry
+	 * where we are running from
+	 */
+	bl	0f				/* Find our address */
+0:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skip				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skip:
+	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done?	*/
+	bne	1b				/* If not, repeat */
+	isync
+
+	/* Create a temp mapping and jump to it */
+	andi.	r6, r23, 1		/* Find the index to use */
+	addi	r24, r6, 1		/* r24 will contain 1 or 2 */
+
+	mfmsr	r9			/* get the MSR */
+	rlwinm	r5, r9, 27, 31, 31	/* Extract the MSR[IS] */
+	xori	r7, r5, 1		/* Use the other address space */
+
+	/* Read the current mapping entries */
+	tlbre	r3, r23, PPC44x_TLB_PAGEID
+	tlbre	r4, r23, PPC44x_TLB_XLAT
+	tlbre	r5, r23, PPC44x_TLB_ATTRIB
+
+	/* Save our current XLAT entry */
+	mr	r25, r4
+
+	/* Extract the TLB PageSize */
+	li	r10, 1 			/* r10 will hold PageSize */
+	rlwinm	r11, r3, 0, 24, 27	/* bits 24-27 */
+
+	/* XXX: As of now we use 256M, 4K pages */
+	cmpwi	r11, PPC44x_TLB_256M
+	bne	tlb_4k
+	rotlwi	r10, r10, 28		/* r10 = 256M */
+	b	write_out
+tlb_4k:
+	cmpwi	r11, PPC44x_TLB_4K
+	bne	default
+	rotlwi	r10, r10, 12		/* r10 = 4K */
+	b	write_out
+default:
+	rotlwi	r10, r10, 10		/* r10 = 1K */
+
+write_out:
+	/*
+	 * Write out the tmp 1:1 mapping for this code in other address space
+	 * Fixup  EPN = RPN , TS=other address space
+	 */
+	insrwi	r3, r7, 1, 23		/* Bit 23 is TS for PAGEID field */
+
+	/* Write out the tmp mapping entries */
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	tlbwe	r4, r24, PPC44x_TLB_XLAT
+	tlbwe	r5, r24, PPC44x_TLB_ATTRIB
+
+	subi	r11, r10, 1		/* PageOffset Mask = PageSize - 1 */
+	not	r10, r11		/* Mask for PageNum */
+
+	/* Switch to other address space in MSR */
+	insrwi	r9, r7, 1, 26		/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	addi	r8, r8, (2f-1b)		/* Find the target offset */
+
+	/* Jump to the tmp mapping */
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+
+2:
+	/* Invalidate the entry we were executing from */
+	li	r3, 0
+	tlbwe	r3, r23, PPC44x_TLB_PAGEID
+
+	/* attribute fields. rwx for SUPERVISOR mode */
+	li	r5, 0
+	ori	r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+	/* Create 1:1 mapping in 256M pages */
+	xori	r7, r7, 1			/* Revert back to Original TS */
+
+	li	r8, 0				/* PageNumber */
+	li	r6, 3				/* TLB Index, start at 3  */
+
+next_tlb:
+	rotlwi	r3, r8, 28			/* Create EPN (bits 0-3) */
+	mr	r4, r3				/* RPN = EPN  */
+	ori	r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
+	insrwi	r3, r7, 1, 23			/* Set TS from r7 */
+
+	tlbwe	r3, r6, PPC44x_TLB_PAGEID	/* PageID field : EPN, V, SIZE */
+	tlbwe	r4, r6, PPC44x_TLB_XLAT		/* Address translation : RPN   */
+	tlbwe	r5, r6, PPC44x_TLB_ATTRIB	/* Attributes */
+
+	addi	r8, r8, 1			/* Increment PN */
+	addi	r6, r6, 1			/* Increment TLB Index */
+	cmpwi	r8, 8				/* Are we done ? */
+	bne	next_tlb
+	isync
+
+	/* Jump to the new mapping 1:1 */
+	li	r9,0
+	insrwi	r9, r7, 1, 26			/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	and	r8, r8, r11			/* Get our offset within page */
+	addi	r8, r8, (2f-1b)
+
+	and	r5, r25, r10			/* Get our target PageNum */
+	or	r8, r8, r5			/* Target jump address */
+
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+2:
+	/* Invalidate the tmp entry we used */
+	li	r3, 0
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	sync
+
+	/* Restore the parameters */
+	mr	r3, r29
+	mr	r4, r30
+	mr	r5, r31
+
+	li	r0, 0
 #else
 	li	r0, 0
 
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index a1cd701..2d27570 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -16,7 +16,6 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-#include <linux/module.h>
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/err.h>
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 59dbf6a..e1612df 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -15,7 +15,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mod_devicetable.h>
 #include <linux/pci.h>
 #include <linux/of.h>
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 0a5a899..41456ff 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -8,7 +8,7 @@
  */
 
 #include <linux/smp.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/memblock.h>
 
 #include <asm/firmware.h>
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 32656f1..458ed3b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
 #include <linux/mm.h>
@@ -1730,6 +1731,17 @@
 
 	if (mode == PCI_PROBE_NORMAL)
 		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+
+	/* Configure PCI Express settings */
+	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+		struct pci_bus *child;
+		list_for_each_entry(child, &bus->children, node) {
+			struct pci_dev *self = child->self;
+			if (!self)
+				continue;
+			pcie_bus_configure_settings(child, self->pcie_mpss);
+		}
+	}
 }
 
 static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index bb15451..fdd1a3d 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ab34046..bcf4bf9 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -18,6 +18,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/syscalls.h>
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 478f8d78..4e69deb 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/gfp.h>
 
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index fe0a5ad..b37d0b5 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/pci-bridge.h>
 #include <asm/prom.h>
 
diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c
index 461499b..a841a9d 100644
--- a/arch/powerpc/kernel/pmc.c
+++ b/arch/powerpc/kernel/pmc.c
@@ -14,7 +14,7 @@
 
 #include <linux/errno.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 03b95e2..0bbc901 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -487,8 +487,8 @@
  */
 static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x80082,	0x80080		},
-		[C(OP_WRITE)] = {	0x80086,	0x80088		},
+		[C(OP_READ)] = {	0x280030,	0x80080		},
+		[C(OP_WRITE)] = {	0x180032,	0x80088		},
 		[C(OP_PREFETCH)] = {	0x810a4,	0		},
 	},
 	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index de83d60..1251e4d 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -297,6 +297,8 @@
 
 static int power7_generic_events[] = {
 	[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x100f8, /* GCT_NOSLOT_CYC */
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x4000a,  /* CMPLU_STALL */
 	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
 	[PERF_COUNT_HW_CACHE_REFERENCES] = 0xc880,	/* LD_REF_L1_LSU*/
 	[PERF_COUNT_HW_CACHE_MISSES] = 0x400f0,		/* LD_MISS_L1	*/
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index f5ae872..d3114a7 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/threads.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8f53954..6457574 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <linux/prctl.h>
 #include <linux/init_task.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kallsyms.h>
 #include <linux/mqueue.h>
 #include <linux/hardirq.h>
@@ -486,28 +486,6 @@
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-#if defined(CONFIG_PPC_BOOK3E_64)
-	/* XXX Current Book3E code doesn't deal with kernel side DBCR0,
-	 * we always hold the user values, so we set it now.
-	 *
-	 * However, we ensure the kernel MSR:DE is appropriately cleared too
-	 * to avoid spurrious single step exceptions in the kernel.
-	 *
-	 * This will have to change to merge with the ppc32 code at some point,
-	 * but I don't like much what ppc32 is doing today so there's some
-	 * thinking needed there
-	 */
-	if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
-		u32 dbcr0;
-
-		mtmsr(mfmsr() & ~MSR_DE);
-		isync();
-		dbcr0 = mfspr(SPRN_DBCR0);
-		dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
-		mtspr(SPRN_DBCR0, dbcr0);
-	}
-#endif /* CONFIG_PPC64_BOOK3E */
-
 #ifdef CONFIG_PPC64
 	/*
 	 * Collect processor utilization data per process
@@ -657,7 +635,7 @@
 	if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
 		printk("CFAR: "REG"\n", regs->orig_gpr3);
 	if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 174e1e9..fa1235b 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -27,7 +27,7 @@
 #include <linux/delay.h>
 #include <linux/initrd.h>
 #include <linux/bitops.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
@@ -54,6 +54,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/phyp_dump.h>
 #include <asm/kexec.h>
+#include <asm/opal.h>
+
 #include <mm/mmu_decl.h>
 
 #ifdef DEBUG
@@ -707,11 +709,23 @@
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 #endif
 
+#ifdef CONFIG_PPC_POWERNV
+	/* Some machines might need OPAL info for debugging, grab it now. */
+	of_scan_flat_dt(early_init_dt_scan_opal, NULL);
+#endif
+
 #ifdef CONFIG_PHYP_DUMP
 	/* scan tree to see if dump occurred during last boot */
 	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
 #endif
 
+	/* Pre-initialize the cmd_line with the content of boot_commmand_line,
+	 * which will be empty except when the content of the variable has
+	 * been overriden by a bootloading mechanism. This happens typically
+	 * with HAL takeover
+	 */
+	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
@@ -723,12 +737,15 @@
 
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
-	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
+	/* make sure we've parsed cmdline for mem= before this */
+	if (memory_limit)
+		first_memblock_size = min(first_memblock_size, memory_limit);
+	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
 	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index a909f4e..cc58486 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -43,6 +43,7 @@
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>
+#include <asm/opal.h>
 
 #include <linux/linux_logo.h>
 
@@ -139,7 +140,9 @@
 
 typedef u32 cell_t;
 
-extern void __start(unsigned long r3, unsigned long r4, unsigned long r5);
+extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
+		    unsigned long r6, unsigned long r7, unsigned long r8,
+		    unsigned long r9);
 
 #ifdef CONFIG_PPC64
 extern int enter_prom(struct prom_args *args, unsigned long entry);
@@ -185,6 +188,7 @@
 #define PLATFORM_LPAR		0x0001
 #define PLATFORM_POWERMAC	0x0400
 #define PLATFORM_GENERIC	0x0500
+#define PLATFORM_OPAL		0x0600
 
 static int __initdata of_platform;
 
@@ -644,7 +648,7 @@
 	}
 }
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
  * There are two methods for telling firmware what our capabilities are.
  * Newer machines have an "ibm,client-architecture-support" method on the
@@ -1274,6 +1278,284 @@
 	prom_printf("  ram_top      : %x\n", RELOC(ram_top));
 }
 
+static void __init prom_close_stdin(void)
+{
+	struct prom_t *_prom = &RELOC(prom);
+	ihandle val;
+
+	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
+		call_prom("close", 1, 0, val);
+}
+
+#ifdef CONFIG_PPC_POWERNV
+
+static u64 __initdata prom_opal_size;
+static u64 __initdata prom_opal_align;
+static int __initdata prom_rtas_start_cpu;
+static u64 __initdata prom_rtas_data;
+static u64 __initdata prom_rtas_entry;
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+static u64 __initdata prom_opal_base;
+static u64 __initdata prom_opal_entry;
+#endif
+
+/* XXX Don't change this structure without updating opal-takeover.S */
+static struct opal_secondary_data {
+	s64				ack;	/*  0 */
+	u64				go;	/*  8 */
+	struct opal_takeover_args	args;	/* 16 */
+} opal_secondary_data;
+
+extern char opal_secondary_entry;
+
+static void prom_query_opal(void)
+{
+	long rc;
+
+	/* We must not query for OPAL presence on a machine that
+	 * supports TNK takeover (970 blades), as this uses the same
+	 * h-call with different arguments and will crash
+	 */
+	if (PHANDLE_VALID(call_prom("finddevice", 1, 1,
+				    ADDR("/tnk-memory-map")))) {
+		prom_printf("TNK takeover detected, skipping OPAL check\n");
+		return;
+	}
+
+	prom_printf("Querying for OPAL presence... ");
+	rc = opal_query_takeover(&RELOC(prom_opal_size),
+				 &RELOC(prom_opal_align));
+	prom_debug("(rc = %ld) ", rc);
+	if (rc != 0) {
+		prom_printf("not there.\n");
+		return;
+	}
+	RELOC(of_platform) = PLATFORM_OPAL;
+	prom_printf(" there !\n");
+	prom_debug("  opal_size  = 0x%lx\n", RELOC(prom_opal_size));
+	prom_debug("  opal_align = 0x%lx\n", RELOC(prom_opal_align));
+	if (RELOC(prom_opal_align) < 0x10000)
+		RELOC(prom_opal_align) = 0x10000;
+}
+
+static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...)
+{
+	struct rtas_args rtas_args;
+	va_list list;
+	int i;
+
+	rtas_args.token = token;
+	rtas_args.nargs = nargs;
+	rtas_args.nret  = nret;
+	rtas_args.rets  = (rtas_arg_t *)&(rtas_args.args[nargs]);
+	va_start(list, outputs);
+	for (i = 0; i < nargs; ++i)
+		rtas_args.args[i] = va_arg(list, rtas_arg_t);
+	va_end(list);
+
+	for (i = 0; i < nret; ++i)
+		rtas_args.rets[i] = 0;
+
+	opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data),
+			RELOC(prom_rtas_entry));
+
+	if (nret > 1 && outputs != NULL)
+		for (i = 0; i < nret-1; ++i)
+			outputs[i] = rtas_args.rets[i+1];
+	return (nret > 0)? rtas_args.rets[0]: 0;
+}
+
+static void __init prom_opal_hold_cpus(void)
+{
+	int i, cnt, cpu, rc;
+	long j;
+	phandle node;
+	char type[64];
+	u32 servers[8];
+	struct prom_t *_prom = &RELOC(prom);
+	void *entry = (unsigned long *)&RELOC(opal_secondary_entry);
+	struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+
+	prom_debug("prom_opal_hold_cpus: start...\n");
+	prom_debug("    - entry       = 0x%x\n", entry);
+	prom_debug("    - data        = 0x%x\n", data);
+
+	data->ack = -1;
+	data->go = 0;
+
+	/* look for cpus */
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		prom_getprop(node, "device_type", type, sizeof(type));
+		if (strcmp(type, RELOC("cpu")) != 0)
+			continue;
+
+		/* Skip non-configured cpus. */
+		if (prom_getprop(node, "status", type, sizeof(type)) > 0)
+			if (strcmp(type, RELOC("okay")) != 0)
+				continue;
+
+		cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers,
+			     sizeof(servers));
+		if (cnt == PROM_ERROR)
+			break;
+		cnt >>= 2;
+		for (i = 0; i < cnt; i++) {
+			cpu = servers[i];
+			prom_debug("CPU %d ... ", cpu);
+			if (cpu == _prom->cpu) {
+				prom_debug("booted !\n");
+				continue;
+			}
+			prom_debug("starting ... ");
+
+			/* Init the acknowledge var which will be reset by
+			 * the secondary cpu when it awakens from its OF
+			 * spinloop.
+			 */
+			data->ack = -1;
+			rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1,
+					    NULL, cpu, entry, data);
+			prom_debug("rtas rc=%d ...", rc);
+
+			for (j = 0; j < 100000000 && data->ack == -1; j++) {
+				HMT_low();
+				mb();
+			}
+			HMT_medium();
+			if (data->ack != -1)
+				prom_debug("done, PIR=0x%x\n", data->ack);
+			else
+				prom_debug("timeout !\n");
+		}
+	}
+	prom_debug("prom_opal_hold_cpus: end...\n");
+}
+
+static void prom_opal_takeover(void)
+{
+	struct opal_secondary_data *data = &RELOC(opal_secondary_data);
+	struct opal_takeover_args *args = &data->args;
+	u64 align = RELOC(prom_opal_align);
+	u64 top_addr, opal_addr;
+
+	args->k_image	= (u64)RELOC(_stext);
+	args->k_size	= _end - _stext;
+	args->k_entry	= 0;
+	args->k_entry2	= 0x60;
+
+	top_addr = _ALIGN_UP(args->k_size, align);
+
+	if (RELOC(prom_initrd_start) != 0) {
+		args->rd_image = RELOC(prom_initrd_start);
+		args->rd_size = RELOC(prom_initrd_end) - args->rd_image;
+		args->rd_loc = top_addr;
+		top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align);
+	}
+
+	/* Pickup an address for the HAL. We want to go really high
+	 * up to avoid problem with future kexecs. On the other hand
+	 * we don't want to be all over the TCEs on P5IOC2 machines
+	 * which are going to be up there too. We assume the machine
+	 * has plenty of memory, and we ask for the HAL for now to
+	 * be just below the 1G point, or above the initrd
+	 */
+	opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align);
+	if (opal_addr < top_addr)
+		opal_addr = top_addr;
+	args->hal_addr = opal_addr;
+
+	/* Copy the command line to the kernel image */
+	strlcpy(RELOC(boot_command_line), RELOC(prom_cmd_line),
+		COMMAND_LINE_SIZE);
+
+	prom_debug("  k_image    = 0x%lx\n", args->k_image);
+	prom_debug("  k_size     = 0x%lx\n", args->k_size);
+	prom_debug("  k_entry    = 0x%lx\n", args->k_entry);
+	prom_debug("  k_entry2   = 0x%lx\n", args->k_entry2);
+	prom_debug("  hal_addr   = 0x%lx\n", args->hal_addr);
+	prom_debug("  rd_image   = 0x%lx\n", args->rd_image);
+	prom_debug("  rd_size    = 0x%lx\n", args->rd_size);
+	prom_debug("  rd_loc     = 0x%lx\n", args->rd_loc);
+	prom_printf("Performing OPAL takeover,this can take a few minutes..\n");
+	prom_close_stdin();
+	mb();
+	data->go = 1;
+	for (;;)
+		opal_do_takeover(args);
+}
+
+/*
+ * Allocate room for and instantiate OPAL
+ */
+static void __init prom_instantiate_opal(void)
+{
+	phandle opal_node;
+	ihandle opal_inst;
+	u64 base, entry;
+	u64 size = 0, align = 0x10000;
+	u32 rets[2];
+
+	prom_debug("prom_instantiate_opal: start...\n");
+
+	opal_node = call_prom("finddevice", 1, 1, ADDR("/ibm,opal"));
+	prom_debug("opal_node: %x\n", opal_node);
+	if (!PHANDLE_VALID(opal_node))
+		return;
+
+	prom_getprop(opal_node, "opal-runtime-size", &size, sizeof(size));
+	if (size == 0)
+		return;
+	prom_getprop(opal_node, "opal-runtime-alignment", &align,
+		     sizeof(align));
+
+	base = alloc_down(size, align, 0);
+	if (base == 0) {
+		prom_printf("OPAL allocation failed !\n");
+		return;
+	}
+
+	opal_inst = call_prom("open", 1, 1, ADDR("/ibm,opal"));
+	if (!IHANDLE_VALID(opal_inst)) {
+		prom_printf("opening opal package failed (%x)\n", opal_inst);
+		return;
+	}
+
+	prom_printf("instantiating opal at 0x%x...", base);
+
+	if (call_prom_ret("call-method", 4, 3, rets,
+			  ADDR("load-opal-runtime"),
+			  opal_inst,
+			  base >> 32, base & 0xffffffff) != 0
+	    || (rets[0] == 0 && rets[1] == 0)) {
+		prom_printf(" failed\n");
+		return;
+	}
+	entry = (((u64)rets[0]) << 32) | rets[1];
+
+	prom_printf(" done\n");
+
+	reserve_mem(base, size);
+
+	prom_debug("opal base     = 0x%x\n", base);
+	prom_debug("opal align    = 0x%x\n", align);
+	prom_debug("opal entry    = 0x%x\n", entry);
+	prom_debug("opal size     = 0x%x\n", (long)size);
+
+	prom_setprop(opal_node, "/ibm,opal", "opal-base-address",
+		     &base, sizeof(base));
+	prom_setprop(opal_node, "/ibm,opal", "opal-entry-address",
+		     &entry, sizeof(entry));
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	RELOC(prom_opal_base) = base;
+	RELOC(prom_opal_entry) = entry;
+#endif
+	prom_debug("prom_instantiate_opal: end...\n");
+}
+
+#endif /* CONFIG_PPC_POWERNV */
 
 /*
  * Allocate room for and instantiate RTAS
@@ -1297,10 +1579,8 @@
 		return;
 
 	base = alloc_down(size, PAGE_SIZE, 0);
-	if (base == 0) {
-		prom_printf("RTAS allocation failed !\n");
-		return;
-	}
+	if (base == 0)
+		prom_panic("Could not allocate memory for RTAS\n");
 
 	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
 	if (!IHANDLE_VALID(rtas_inst)) {
@@ -1326,6 +1606,12 @@
 	prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
 		     &entry, sizeof(entry));
 
+#ifdef CONFIG_PPC_POWERNV
+	/* PowerVN takeover hack */
+	RELOC(prom_rtas_data) = base;
+	RELOC(prom_rtas_entry) = entry;
+	prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4);
+#endif
 	prom_debug("rtas base     = 0x%x\n", base);
 	prom_debug("rtas entry    = 0x%x\n", entry);
 	prom_debug("rtas size     = 0x%x\n", (long)size);
@@ -1543,7 +1829,7 @@
 		*acknowledge = (unsigned long)-1;
 
 		if (reg != _prom->cpu) {
-			/* Primary Thread of non-boot cpu */
+			/* Primary Thread of non-boot cpu or any thread */
 			prom_printf("starting cpu hw idx %lu... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
@@ -1652,15 +1938,6 @@
 		prom_setprop(val, path, "linux,boot-display", NULL, 0);
 }
 
-static void __init prom_close_stdin(void)
-{
-	struct prom_t *_prom = &RELOC(prom);
-	ihandle val;
-
-	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
-		call_prom("close", 1, 0, val);
-}
-
 static int __init prom_find_machine_type(void)
 {
 	struct prom_t *_prom = &RELOC(prom);
@@ -1671,7 +1948,7 @@
 	int x;
 #endif
 
-	/* Look for a PowerMac */
+	/* Look for a PowerMac or a Cell */
 	len = prom_getprop(_prom->root, "compatible",
 			   compat, sizeof(compat)-1);
 	if (len > 0) {
@@ -1697,7 +1974,11 @@
 		}
 	}
 #ifdef CONFIG_PPC64
-	/* If not a mac, try to figure out if it's an IBM pSeries or any other
+	/* Try to detect OPAL */
+	if (PHANDLE_VALID(call_prom("finddevice", 1, 1, ADDR("/ibm,opal"))))
+		return PLATFORM_OPAL;
+
+	/* Try to figure out if it's an IBM pSeries or any other
 	 * PAPR compliant platform. We assume it is if :
 	 *  - /device_type is "chrp" (please, do NOT use that for future
 	 *    non-IBM designs !
@@ -1924,7 +2205,7 @@
 	unsigned long soff;
 	unsigned char *valp;
 	static char pname[MAX_PROPERTY_NAME];
-	int l, room;
+	int l, room, has_phandle = 0;
 
 	dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
 
@@ -2008,19 +2289,26 @@
 		valp = make_room(mem_start, mem_end, l, 4);
 		call_prom("getprop", 4, 1, node, RELOC(pname), valp, l);
 		*mem_start = _ALIGN(*mem_start, 4);
+
+		if (!strcmp(RELOC(pname), RELOC("phandle")))
+			has_phandle = 1;
 	}
 
-	/* Add a "linux,phandle" property. */
-	soff = dt_find_string(RELOC("linux,phandle"));
-	if (soff == 0)
-		prom_printf("WARNING: Can't find string index for"
-			    " <linux-phandle> node %s\n", path);
-	else {
-		dt_push_token(OF_DT_PROP, mem_start, mem_end);
-		dt_push_token(4, mem_start, mem_end);
-		dt_push_token(soff, mem_start, mem_end);
-		valp = make_room(mem_start, mem_end, 4, 4);
-		*(u32 *)valp = node;
+	/* Add a "linux,phandle" property if no "phandle" property already
+	 * existed (can happen with OPAL)
+	 */
+	if (!has_phandle) {
+		soff = dt_find_string(RELOC("linux,phandle"));
+		if (soff == 0)
+			prom_printf("WARNING: Can't find string index for"
+				    " <linux-phandle> node %s\n", path);
+		else {
+			dt_push_token(OF_DT_PROP, mem_start, mem_end);
+			dt_push_token(4, mem_start, mem_end);
+			dt_push_token(soff, mem_start, mem_end);
+			valp = make_room(mem_start, mem_end, 4, 4);
+			*(u32 *)valp = node;
+		}
 	}
 
 	/* do all our children */
@@ -2504,6 +2792,7 @@
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
+
 /*
  * We enter here early on, when the Open Firmware prom is still
  * handling exceptions and the MMU hash table for us.
@@ -2553,6 +2842,7 @@
 	 * between pSeries SMP and pSeries LPAR
 	 */
 	RELOC(of_platform) = prom_find_machine_type();
+	prom_printf("Detected machine type: %x\n", RELOC(of_platform));
 
 #ifndef CONFIG_RELOCATABLE
 	/* Bail if this is a kdump kernel. */
@@ -2565,7 +2855,7 @@
 	 */
 	prom_check_initrd(r3, r4);
 
-#ifdef CONFIG_PPC_PSERIES
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 	/*
 	 * On pSeries, inform the firmware about our capabilities
 	 */
@@ -2611,14 +2901,33 @@
 #endif
 
 	/*
-	 * On non-powermacs, try to instantiate RTAS and puts all CPUs
-	 * in spin-loops. PowerMacs don't have a working RTAS and use
-	 * a different way to spin CPUs
+	 * On non-powermacs, try to instantiate RTAS. PowerMacs don't
+	 * have a usable RTAS implementation.
 	 */
-	if (RELOC(of_platform) != PLATFORM_POWERMAC) {
+	if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+	    RELOC(of_platform) != PLATFORM_OPAL)
 		prom_instantiate_rtas();
+
+#ifdef CONFIG_PPC_POWERNV
+	/* Detect HAL and try instanciating it & doing takeover */
+	if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) {
+		prom_query_opal();
+		if (RELOC(of_platform) == PLATFORM_OPAL) {
+			prom_opal_hold_cpus();
+			prom_opal_takeover();
+		}
+	} else if (RELOC(of_platform) == PLATFORM_OPAL)
+		prom_instantiate_opal();
+#endif
+
+	/*
+	 * On non-powermacs, put all CPUs in spin-loops.
+	 *
+	 * PowerMacs use a different mechanism to spin CPUs
+	 */
+	if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+	    RELOC(of_platform) != PLATFORM_OPAL)
 		prom_hold_cpus();
-	}
 
 	/*
 	 * Fill in some infos for use by the kernel later on
@@ -2685,7 +2994,13 @@
 	reloc_got2(-offset);
 #endif
 
-	__start(hdr, kbase, 0);
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
+	/* OPAL early debug gets the OPAL base & entry in r8 and r9 */
+	__start(hdr, kbase, 0, 0, 0,
+		RELOC(prom_opal_base), RELOC(prom_opal_entry));
+#else
+	__start(hdr, kbase, 0, 0, 0, 0, 0);
+#endif
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 9f82f49..70f4286 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,9 @@
 _end enter_prom memcpy memset reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr linux_banner"
+reloc_got2 kernstart_addr memstart_addr linux_banner _stext
+opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
+boot_command_line"
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 47187cc..4e1331b 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,7 +2,6 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
 #include <linux/of_address.h>
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 05b7dd2..5de73db 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -30,9 +30,6 @@
 #include <linux/seccomp.h>
 #include <linux/audit.h>
 #include <trace/syscall.h>
-#ifdef CONFIG_PPC32
-#include <linux/module.h>
-#endif
 #include <linux/hw_breakpoint.h>
 #include <linux/perf_event.h>
 
@@ -1497,9 +1494,14 @@
 		if (index < PT_FPR0) {
 			tmp = ptrace_get_reg(child, (int) index);
 		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)
-				[TS_FPRWIDTH * (index - PT_FPR0)];
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				tmp = ((unsigned long *)child->thread.fpr)
+					[fpidx * TS_FPRWIDTH];
+			else
+				tmp = child->thread.fpscr.val;
 		}
 		ret = put_user(tmp, datalp);
 		break;
@@ -1525,9 +1527,14 @@
 		if (index < PT_FPR0) {
 			ret = ptrace_put_reg(child, index, data);
 		} else {
+			unsigned int fpidx = index - PT_FPR0;
+
 			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)
-				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
+			if (fpidx < (PT_FPSCR - PT_FPR0))
+				((unsigned long *)child->thread.fpr)
+					[fpidx * TS_FPRWIDTH] = data;
+			else
+				child->thread.fpscr.val = data;
 			ret = 0;
 		}
 		break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index d5ca823..517b1d8 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/capability.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index b1d738d..77bb77d 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -12,7 +12,7 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/sched.h>
 #include <linux/init.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 209135a..ac76108 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -107,6 +107,8 @@
 			 PTRRELOC(&__start___lwsync_fixup),
 			 PTRRELOC(&__stop___lwsync_fixup));
 
+	do_final_fixups();
+
 	return KERNELBASE + offset;
 }
 
@@ -117,7 +119,7 @@
  * This is called very early on the boot process, after a minimal
  * MMU environment has been set up but before MMU_init is called.
  */
-notrace void __init machine_init(unsigned long dt_ptr)
+notrace void __init machine_init(u64 dt_ptr)
 {
 	lockdep_init();
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index aebef13..fb9bb46 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -12,7 +12,7 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/sched.h>
 #include <linux/init.h>
@@ -278,14 +278,14 @@
 
 	DBG(" -> initialize_cache_info()\n");
 
-	for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
+	for_each_node_by_type(np, "cpu") {
 		num_cpus += 1;
 
-		/* We're assuming *all* of the CPUs have the same
+		/*
+		 * We're assuming *all* of the CPUs have the same
 		 * d-cache and i-cache sizes... -Peter
 		 */
-
-		if ( num_cpus == 1 ) {
+		if (num_cpus == 1) {
 			const u32 *sizep, *lsizep;
 			u32 size, lsize;
 
@@ -294,10 +294,13 @@
 			sizep = of_get_property(np, "d-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, "d-cache-block-size", NULL);
+			lsizep = of_get_property(np, "d-cache-block-size",
+						 NULL);
 			/* fallback if block size missing */
 			if (lsizep == NULL)
-				lsizep = of_get_property(np, "d-cache-line-size", NULL);
+				lsizep = of_get_property(np,
+							 "d-cache-line-size",
+							 NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
@@ -314,9 +317,12 @@
 			sizep = of_get_property(np, "i-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = of_get_property(np, "i-cache-block-size", NULL);
+			lsizep = of_get_property(np, "i-cache-block-size",
+						 NULL);
 			if (lsizep == NULL)
-				lsizep = of_get_property(np, "i-cache-line-size", NULL);
+				lsizep = of_get_property(np,
+							 "i-cache-line-size",
+							 NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
@@ -353,6 +359,7 @@
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
 	do_lwsync_fixups(cur_cpu_spec->cpu_features,
 			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
+	do_final_fixups();
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 78b76dc..836a5a1 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -97,7 +97,7 @@
 	compat_sigset_t	cset;
 
 	switch (_NSIG_WORDS) {
-	case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+	case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
 		cset.sig[7] = set->sig[3] >> 32;
 	case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
 		cset.sig[5] = set->sig[2] >> 32;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index e91c736..a50b5ec 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -23,7 +23,6 @@
 #include <linux/stddef.h>
 #include <linux/elf.h>
 #include <linux/ptrace.h>
-#include <linux/module.h>
 #include <linux/ratelimit.h>
 
 #include <asm/sigcontext.h>
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 7bf2187..6df7090 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -18,7 +18,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
@@ -70,6 +70,10 @@
 static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
 #define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
 #define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
+
+/* State of each CPU during hotplug phases */
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
 #else
 static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
 #define get_idle_for_cpu(x)      (idle_thread_array[(x)])
@@ -104,12 +108,25 @@
 	 * cpu_start field to become non-zero After we set cpu_start,
 	 * the processor will continue on to secondary_start
 	 */
-	paca[nr].cpu_start = 1;
-	smp_mb();
+	if (!paca[nr].cpu_start) {
+		paca[nr].cpu_start = 1;
+		smp_mb();
+		return 0;
+	}
+
+#ifdef CONFIG_HOTPLUG_CPU
+	/*
+	 * Ok it's not there, so it might be soft-unplugged, let's
+	 * try to bring it back
+	 */
+	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	smp_wmb();
+	smp_send_reschedule(nr);
+#endif /* CONFIG_HOTPLUG_CPU */
 
 	return 0;
 }
-#endif
+#endif /* CONFIG_PPC64 */
 
 static irqreturn_t call_function_action(int irq, void *data)
 {
@@ -170,7 +187,7 @@
 		return 1;
 	}
 #endif
-	err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+	err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
 			  smp_ipi_name[msg], 0);
 	WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
 		virq, smp_ipi_name[msg], err);
@@ -357,8 +374,6 @@
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-/* State of each CPU during hotplug phases */
-static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
 int generic_cpu_disable(void)
 {
@@ -406,6 +421,11 @@
 {
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
+
+int generic_check_cpu_restart(unsigned int cpu)
+{
+	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
+}
 #endif
 
 struct create_idle {
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index b0dbb1d..3d30ef1 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -10,7 +10,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <asm/ptrace.h>
diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c
index aa17b76..641f9ad 100644
--- a/arch/powerpc/kernel/swsusp.c
+++ b/arch/powerpc/kernel/swsusp.c
@@ -33,6 +33,6 @@
 void restore_processor_state(void)
 {
 #ifdef CONFIG_PPC32
-	switch_mmu_context(NULL, current->active_mm);
+	switch_mmu_context(current->active_mm, current->active_mm);
 #endif
 }
diff --git a/arch/powerpc/kernel/swsusp_64.c b/arch/powerpc/kernel/swsusp_64.c
index 6f3f069..168e884 100644
--- a/arch/powerpc/kernel/swsusp_64.c
+++ b/arch/powerpc/kernel/swsusp_64.c
@@ -9,6 +9,7 @@
 #include <asm/system.h>
 #include <asm/iommu.h>
 #include <linux/irq.h>
+#include <linux/sched.h>
 #include <linux/interrupt.h>
 
 void do_after_copyback(void)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index f0f2199..ce035c1 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -4,7 +4,7 @@
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/nodemask.h>
 #include <linux/cpumask.h>
 #include <linux/notifier.h>
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 03b29a6..522bb1d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -33,7 +33,7 @@
  */
 
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f19d977..5459d14 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -457,7 +457,14 @@
 
 	if (reason & MCSR_DCPERR_MC) {
 		printk("Data Cache Parity Error\n");
-		recoverable = 0;
+
+		/*
+		 * In write shadow mode we auto-recover from the error, but it
+		 * may still get logged and cause a machine check.  We should
+		 * only treat the non-write shadow case as non-recoverable.
+		 */
+		if (!(mfspr(SPRN_L1CSR2) & L1CSR2_DCWS))
+			recoverable = 0;
 	}
 
 	if (reason & MCSR_L2MMU_MHIT) {
@@ -1291,14 +1298,12 @@
 
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
 					       current->thread.dbcr1))
 				regs->msr |= MSR_DE;
 			else
 				/* Make sure the IDM bit is off */
 				current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index b4607a9..57fa2c0 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -69,6 +69,12 @@
 	udbg_init_wsp();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC)
 	udbg_init_ehv_bc();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC)
+	udbg_init_ps3gelic();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_RAW)
+	udbg_init_debug_opal_raw();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI)
+	udbg_init_debug_opal_hvsi();
 #endif
 
 #ifdef CONFIG_PPC_EARLY_DEBUG
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 142ab10..7d14bb69 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -9,7 +9,6 @@
  *  2 of the License, or (at your option) any later version.
  */
 
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 1b695fd..f65af61 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -15,11 +15,12 @@
  */
 
 #include <linux/types.h>
+#include <linux/stat.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/console.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/kobject.h>
@@ -605,15 +606,20 @@
         return dma_iommu_ops.dma_supported(dev, mask);
 }
 
-struct dma_map_ops vio_dma_mapping_ops = {
-	.alloc_coherent = vio_dma_iommu_alloc_coherent,
-	.free_coherent  = vio_dma_iommu_free_coherent,
-	.map_sg         = vio_dma_iommu_map_sg,
-	.unmap_sg       = vio_dma_iommu_unmap_sg,
-	.map_page       = vio_dma_iommu_map_page,
-	.unmap_page     = vio_dma_iommu_unmap_page,
-	.dma_supported  = vio_dma_iommu_dma_supported,
+static u64 vio_dma_get_required_mask(struct device *dev)
+{
+        return dma_iommu_ops.get_required_mask(dev);
+}
 
+struct dma_map_ops vio_dma_mapping_ops = {
+	.alloc_coherent    = vio_dma_iommu_alloc_coherent,
+	.free_coherent     = vio_dma_iommu_free_coherent,
+	.map_sg            = vio_dma_iommu_map_sg,
+	.unmap_sg          = vio_dma_iommu_unmap_sg,
+	.map_page          = vio_dma_iommu_map_page,
+	.unmap_page        = vio_dma_iommu_unmap_page,
+	.dma_supported     = vio_dma_iommu_dma_supported,
+	.get_required_mask = vio_dma_get_required_mask,
 };
 
 /**
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index ca1f88b..7b612a7 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -20,6 +20,7 @@
 #include <linux/kvm_host.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index f68a34d..a459479 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -16,6 +16,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include <asm/reg.h>
diff --git a/arch/powerpc/kvm/book3s_exports.c b/arch/powerpc/kvm/book3s_exports.c
index f7f63a0..a150817 100644
--- a/arch/powerpc/kvm/book3s_exports.c
+++ b/arch/powerpc/kvm/book3s_exports.c
@@ -17,7 +17,7 @@
  * Authors: Alexander Graf <agraf@suse.de>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/kvm_book3s.h>
 
 #ifdef CONFIG_KVM_BOOK3S_64_HV
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4644c79..0cb137a 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -24,6 +24,7 @@
 #include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/fs.h>
 #include <linux/anon_inodes.h>
 #include <linux/cpumask.h>
@@ -43,6 +44,7 @@
 #include <asm/processor.h>
 #include <asm/cputhreads.h>
 #include <asm/page.h>
+#include <asm/hvcall.h>
 #include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index d431203..286f13d 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -8,6 +8,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/preempt.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/bootmem.h>
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index f422231..44d8829 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1263,7 +1263,7 @@
 	addi	r6,r5,VCORE_NAPPING_THREADS
 31:	lwarx	r4,0,r6
 	or	r4,r4,r0
-	popcntw	r7,r4
+	PPC_POPCNTW(r7,r4)
 	cmpw	r7,r8
 	bge	2f
 	stwcx.	r4,0,r6
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index d417511..3c791e1 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
@@ -150,16 +151,14 @@
 #ifdef CONFIG_PPC_BOOK3S_64
 	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
 		kvmppc_mmu_book3s_64_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
-			to_book3s(vcpu)->hior = 0xfff00000;
+		to_book3s(vcpu)->hior = 0xfff00000;
 		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_64;
 	} else
 #endif
 	{
 		kvmppc_mmu_book3s_32_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
-			to_book3s(vcpu)->hior = 0;
+		to_book3s(vcpu)->hior = 0;
 		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_32;
 	}
@@ -796,9 +795,6 @@
 		}
 	}
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
-		sregs->u.s.hior = to_book3s(vcpu)->hior;
-
 	return 0;
 }
 
@@ -835,11 +831,6 @@
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
-		to_book3s(vcpu)->hior_sregs = true;
-		to_book3s(vcpu)->hior = sregs->u.s.hior;
-	}
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 0d843c6..607fbdf 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
-#include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/hrtimer.h>
 #include <linux/fs.h>
@@ -209,7 +208,6 @@
 	case KVM_CAP_PPC_BOOKE_SREGS:
 #else
 	case KVM_CAP_PPC_SEGSTATE:
-	case KVM_CAP_PPC_HIOR:
 	case KVM_CAP_PPC_PAPR:
 #endif
 	case KVM_CAP_PPC_UNSET_IRQ:
diff --git a/arch/powerpc/lib/checksum_wrappers_64.c b/arch/powerpc/lib/checksum_wrappers_64.c
index 769b817..08e3a33 100644
--- a/arch/powerpc/lib/checksum_wrappers_64.c
+++ b/arch/powerpc/lib/checksum_wrappers_64.c
@@ -17,7 +17,7 @@
  *
  * Author: Anton Blanchard <anton@au.ibm.com>
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <asm/checksum.h>
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
index e91615a..8df55fc 100644
--- a/arch/powerpc/lib/devres.c
+++ b/arch/powerpc/lib/devres.c
@@ -10,7 +10,7 @@
 #include <linux/device.h>	/* devres_*(), devm_ioremap_release() */
 #include <linux/gfp.h>
 #include <linux/io.h>		/* ioremap_prot() */
-#include <linux/module.h>	/* EXPORT_SYMBOL() */
+#include <linux/export.h>	/* EXPORT_SYMBOL() */
 
 /**
  * devm_ioremap_prot - Managed ioremap_prot()
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 0d08d01..7a8a748 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <asm/cputable.h>
 #include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
 
 
 struct fixup_entry {
@@ -128,6 +130,27 @@
 	}
 }
 
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+	int *src, *dest;
+	unsigned long length;
+
+	if (PHYSICAL_START == 0)
+		return;
+
+	src = (int *)(KERNELBASE + PHYSICAL_START);
+	dest = (int *)KERNELBASE;
+	length = (__end_interrupts - _stext) / sizeof(int);
+
+	while (length--) {
+		patch_instruction(dest, *src);
+		src++;
+		dest++;
+	}
+#endif
+}
+
 #ifdef CONFIG_FTR_FIXUP_SELFTEST
 
 #define check(x)	\
diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c
index 9b8182e..a6ebba5 100644
--- a/arch/powerpc/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/stringify.h>
 #include <linux/smp.h>
 
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 45907c1..a1060a8 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -15,7 +15,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c
index 6227920..a73f088 100644
--- a/arch/powerpc/math-emu/math_efp.c
+++ b/arch/powerpc/math-emu/math_efp.c
@@ -171,10 +171,6 @@
 	case EFDNABS:	ret = XA;	break;
 	case EFDNEG:	ret = XA;	break;
 	case EFDSUB:	ret = AB;	break;
-
-	default:
-		printk(KERN_ERR "\nOoops! SPE instruction no type found.");
-		printk(KERN_ERR "\ninst code: %08lx\n", speinsn);
 	}
 
 	return ret;
@@ -195,7 +191,7 @@
 
 	type = insn_type(speinsn);
 	if (type == NOTYPE)
-		return -ENOSYS;
+		goto illegal;
 
 	func = speinsn & 0x7ff;
 	fc = (speinsn >> 21) & 0x1f;
@@ -212,12 +208,10 @@
 
 	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
 
-#ifdef DEBUG
-	printk("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
-	printk("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
-	printk("va: %08x  %08x\n", va.wp[0], va.wp[1]);
-	printk("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+	pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+	pr_debug("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
+	pr_debug("va: %08x  %08x\n", va.wp[0], va.wp[1]);
+	pr_debug("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
 
 	switch (src) {
 	case SPFP: {
@@ -235,10 +229,8 @@
 			break;
 		}
 
-#ifdef DEBUG
-		printk("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
-		printk("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
-#endif
+		pr_debug("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
+		pr_debug("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
 
 		switch (func) {
 		case EFSABS:
@@ -305,10 +297,10 @@
 			FP_DECL_D(DB);
 			FP_CLEAR_EXCEPTIONS;
 			FP_UNPACK_DP(DB, vb.dp);
-#ifdef DEBUG
-			printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+
+			pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
 					DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
+
 			FP_CONV(S, D, 1, 2, SR, DB);
 			goto pack_s;
 		}
@@ -332,9 +324,8 @@
 		break;
 
 pack_s:
-#ifdef DEBUG
-		printk("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
-#endif
+		pr_debug("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
+
 		FP_PACK_SP(vc.wp + 1, SR);
 		goto update_regs;
 
@@ -365,12 +356,10 @@
 			break;
 		}
 
-#ifdef DEBUG
-		printk("DA: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DA: %ld %08lx %08lx %ld (%ld)\n",
 				DA_s, DA_f1, DA_f0, DA_e, DA_c);
-		printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DB: %ld %08lx %08lx %ld (%ld)\n",
 				DB_s, DB_f1, DB_f0, DB_e, DB_c);
-#endif
 
 		switch (func) {
 		case EFDABS:
@@ -438,10 +427,10 @@
 			FP_DECL_S(SB);
 			FP_CLEAR_EXCEPTIONS;
 			FP_UNPACK_SP(SB, vb.wp + 1);
-#ifdef DEBUG
-			printk("SB: %ld %08lx %ld (%ld)\n",
+
+			pr_debug("SB: %ld %08lx %ld (%ld)\n",
 					SB_s, SB_f, SB_e, SB_c);
-#endif
+
 			FP_CONV(D, S, 2, 1, DR, SB);
 			goto pack_d;
 		}
@@ -471,10 +460,9 @@
 		break;
 
 pack_d:
-#ifdef DEBUG
-		printk("DR: %ld %08lx %08lx %ld (%ld)\n",
+		pr_debug("DR: %ld %08lx %08lx %ld (%ld)\n",
 				DR_s, DR_f1, DR_f0, DR_e, DR_c);
-#endif
+
 		FP_PACK_DP(vc.dp, DR);
 		goto update_regs;
 
@@ -511,12 +499,14 @@
 			break;
 		}
 
-#ifdef DEBUG
-		printk("SA0: %ld %08lx %ld (%ld)\n", SA0_s, SA0_f, SA0_e, SA0_c);
-		printk("SA1: %ld %08lx %ld (%ld)\n", SA1_s, SA1_f, SA1_e, SA1_c);
-		printk("SB0: %ld %08lx %ld (%ld)\n", SB0_s, SB0_f, SB0_e, SB0_c);
-		printk("SB1: %ld %08lx %ld (%ld)\n", SB1_s, SB1_f, SB1_e, SB1_c);
-#endif
+		pr_debug("SA0: %ld %08lx %ld (%ld)\n",
+				SA0_s, SA0_f, SA0_e, SA0_c);
+		pr_debug("SA1: %ld %08lx %ld (%ld)\n",
+				SA1_s, SA1_f, SA1_e, SA1_c);
+		pr_debug("SB0: %ld %08lx %ld (%ld)\n",
+				SB0_s, SB0_f, SB0_e, SB0_c);
+		pr_debug("SB1: %ld %08lx %ld (%ld)\n",
+				SB1_s, SB1_f, SB1_e, SB1_c);
 
 		switch (func) {
 		case EVFSABS:
@@ -605,10 +595,11 @@
 		break;
 
 pack_vs:
-#ifdef DEBUG
-		printk("SR0: %ld %08lx %ld (%ld)\n", SR0_s, SR0_f, SR0_e, SR0_c);
-		printk("SR1: %ld %08lx %ld (%ld)\n", SR1_s, SR1_f, SR1_e, SR1_c);
-#endif
+		pr_debug("SR0: %ld %08lx %ld (%ld)\n",
+				SR0_s, SR0_f, SR0_e, SR0_c);
+		pr_debug("SR1: %ld %08lx %ld (%ld)\n",
+				SR1_s, SR1_f, SR1_e, SR1_c);
+
 		FP_PACK_SP(vc.wp, SR0);
 		FP_PACK_SP(vc.wp + 1, SR1);
 		goto update_regs;
@@ -646,14 +637,12 @@
 	current->thread.evr[fc] = vc.wp[0];
 	regs->gpr[fc] = vc.wp[1];
 
-#ifdef DEBUG
-	printk("ccr = %08lx\n", regs->ccr);
-	printk("cur exceptions = %08x spefscr = %08lx\n",
+	pr_debug("ccr = %08lx\n", regs->ccr);
+	pr_debug("cur exceptions = %08x spefscr = %08lx\n",
 			FP_CUR_EXCEPTIONS, __FPU_FPSCR);
-	printk("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
-	printk("va: %08x  %08x\n", va.wp[0], va.wp[1]);
-	printk("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
-#endif
+	pr_debug("vc: %08x  %08x\n", vc.wp[0], vc.wp[1]);
+	pr_debug("va: %08x  %08x\n", va.wp[0], va.wp[1]);
+	pr_debug("vb: %08x  %08x\n", vb.wp[0], vb.wp[1]);
 
 	return 0;
 
@@ -661,9 +650,7 @@
 	if (have_e500_cpu_a005_erratum) {
 		/* according to e500 cpu a005 erratum, reissue efp inst */
 		regs->nip -= 4;
-#ifdef DEBUG
-		printk(KERN_DEBUG "re-issue efp inst: %08lx\n", speinsn);
-#endif
+		pr_debug("re-issue efp inst: %08lx\n", speinsn);
 		return 0;
 	}
 
@@ -685,13 +672,20 @@
 	type = insn_type(speinsn & 0x7ff);
 	if (type == XCR) return -ENOSYS;
 
+	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+	pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+
+	/* No need to round if the result is exact */
+	if (!(__FPU_FPSCR & FP_EX_INEXACT))
+		return 0;
+
 	fc = (speinsn >> 21) & 0x1f;
 	s_lo = regs->gpr[fc] & SIGN_BIT_S;
 	s_hi = current->thread.evr[fc] & SIGN_BIT_S;
 	fgpr.wp[0] = current->thread.evr[fc];
 	fgpr.wp[1] = regs->gpr[fc];
 
-	__FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+	pr_debug("round fgpr: %08x  %08x\n", fgpr.wp[0], fgpr.wp[1]);
 
 	switch ((speinsn >> 5) & 0x7) {
 	/* Since SPE instructions on E500 core can handle round to nearest
@@ -731,6 +725,8 @@
 	current->thread.evr[fc] = fgpr.wp[0];
 	regs->gpr[fc] = fgpr.wp[1];
 
+	pr_debug("  to fgpr: %08x  %08x\n", fgpr.wp[0], fgpr.wp[1]);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index bdca46e..991ee81 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -29,6 +29,7 @@
 ifeq ($(CONFIG_HUGETLB_PAGE),y)
 obj-y				+= hugetlbpage.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hugetlbpage-hash64.o
+obj-$(CONFIG_PPC_BOOK3E_MMU)	+= hugetlbpage-book3e.o
 endif
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index b42f76c..329be36 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/highmem.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <asm/tlbflush.h>
 
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index f7802c8..66a6fd3 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -101,17 +101,17 @@
 
 /*
  * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
- * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus
- * that support extended page sizes).  Note that while some cpus support a
- * page size of 4G, we don't allow its use here.
+ * in particular size must be a power of 4 between 4k and the max supported by
+ * an implementation; max may further be limited by what can be represented in
+ * an unsigned long (for example, 32-bit implementations cannot support a 4GB
+ * size).
  */
 static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		unsigned long size, unsigned long flags, unsigned int pid)
 {
-	unsigned int tsize, lz;
+	unsigned int tsize;
 
-	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
-	tsize = 21 - lz;
+	tsize = __ilog2(size) - 10;
 
 #ifdef CONFIG_SMP
 	if ((flags & _PAGE_NO_CACHE) == 0)
@@ -146,29 +146,36 @@
 	loadcam_entry(index);
 }
 
+unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+			  phys_addr_t phys)
+{
+	unsigned int camsize = __ilog2(ram) & ~1U;
+	unsigned int align = __ffs(virt | phys) & ~1U;
+	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+	/* Convert (4^max) kB to (2^max) bytes */
+	max_cam = max_cam * 2 + 10;
+
+	if (camsize > align)
+		camsize = align;
+	if (camsize > max_cam)
+		camsize = max_cam;
+
+	return 1UL << camsize;
+}
+
 unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 {
 	int i;
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 	unsigned long amount_mapped = 0;
-	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
-
-	/* Convert (4^max) kB to (2^max) bytes */
-	max_cam = max_cam * 2 + 10;
 
 	/* Calculate CAM values */
 	for (i = 0; ram && i < max_cam_idx; i++) {
-		unsigned int camsize = __ilog2(ram) & ~1U;
-		unsigned int align = __ffs(virt | phys) & ~1U;
 		unsigned long cam_sz;
 
-		if (camsize > align)
-			camsize = align;
-		if (camsize > max_cam)
-			camsize = max_cam;
-
-		cam_sz = 1UL << camsize;
+		cam_sz = calc_cam_sz(ram, virt, phys);
 		settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
 
 		ram -= cam_sz;
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 26b2872..2d28218 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -27,6 +27,7 @@
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <linux/sysctl.h>
+#include <linux/export.h>
 #include <linux/ctype.h>
 #include <linux/cache.h>
 #include <linux/init.h>
@@ -105,9 +106,6 @@
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 EXPORT_SYMBOL_GPL(mmu_slb_size);
-#ifdef CONFIG_HUGETLB_PAGE
-unsigned int HPAGE_SHIFT;
-#endif
 #ifdef CONFIG_PPC_64K_PAGES
 int mmu_ci_restrictions;
 #endif
@@ -534,11 +532,11 @@
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-void create_section_mapping(unsigned long start, unsigned long end)
+int create_section_mapping(unsigned long start, unsigned long end)
 {
-	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+	return htab_bolt_mapping(start, end, __pa(start),
 				 pgprot_val(PAGE_KERNEL), mmu_linear_psize,
-				 mmu_kernel_ssize));
+				 mmu_kernel_ssize);
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
new file mode 100644
index 0000000..343ad0b
--- /dev/null
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -0,0 +1,121 @@
+/*
+ * PPC Huge TLB Page Support for Book3E MMU
+ *
+ * Copyright (C) 2009 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
+ *
+ */
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+
+static inline int mmu_get_tsize(int psize)
+{
+	return mmu_psize_defs[psize].enc;
+}
+
+static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
+{
+	int found = 0;
+
+	mtspr(SPRN_MAS6, pid << 16);
+	if (mmu_has_feature(MMU_FTR_USE_TLBRSRV)) {
+		asm volatile(
+			"li	%0,0\n"
+			"tlbsx.	0,%1\n"
+			"bne	1f\n"
+			"li	%0,1\n"
+			"1:\n"
+			: "=&r"(found) : "r"(ea));
+	} else {
+		asm volatile(
+			"tlbsx	0,%1\n"
+			"mfspr	%0,0x271\n"
+			"srwi	%0,%0,31\n"
+			: "=&r"(found) : "r"(ea));
+	}
+
+	return found;
+}
+
+void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+{
+	unsigned long mas1, mas2;
+	u64 mas7_3;
+	unsigned long psize, tsize, shift;
+	unsigned long flags;
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	int index, lz, ncams;
+	struct vm_area_struct *vma;
+#endif
+
+	if (unlikely(is_kernel_addr(ea)))
+		return;
+
+#ifdef CONFIG_PPC_MM_SLICES
+	psize = mmu_get_tsize(get_slice_psize(mm, ea));
+	tsize = mmu_get_psize(psize);
+	shift = mmu_psize_defs[psize].shift;
+#else
+	vma = find_vma(mm, ea);
+	psize = vma_mmu_pagesize(vma);	/* returns actual size in bytes */
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
+	shift = 31 - lz;
+	tsize = 21 - lz;
+#endif
+
+	/*
+	 * We can't be interrupted while we're setting up the MAS
+	 * regusters or after we've confirmed that no tlb exists.
+	 */
+	local_irq_save(flags);
+
+	if (unlikely(book3e_tlb_exists(ea, mm->context.id))) {
+		local_irq_restore(flags);
+		return;
+	}
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+	/* We have to use the CAM(TLB1) on FSL parts for hugepages */
+	index = __get_cpu_var(next_tlbcam_idx);
+	mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
+
+	/* Just round-robin the entries and wrap when we hit the end */
+	if (unlikely(index == ncams - 1))
+		__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
+	else
+		__get_cpu_var(next_tlbcam_idx)++;
+#endif
+	mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
+	mas2 = ea & ~((1UL << shift) - 1);
+	mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
+	mas7_3 = (u64)pte_pfn(pte) << PAGE_SHIFT;
+	mas7_3 |= (pte_val(pte) >> PTE_BAP_SHIFT) & MAS3_BAP_MASK;
+	if (!pte_dirty(pte))
+		mas7_3 &= ~(MAS3_SW|MAS3_UW);
+
+	mtspr(SPRN_MAS1, mas1);
+	mtspr(SPRN_MAS2, mas2);
+
+	if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
+		mtspr(SPRN_MAS7_MAS3, mas7_3);
+	} else {
+		mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
+		mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
+	}
+
+	asm volatile ("tlbwe");
+
+	local_irq_restore(flags);
+}
+
+void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	struct hstate *hstate = hstate_file(vma->vm_file);
+	unsigned long tsize = huge_page_shift(hstate) - 10;
+
+	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
+
+}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index da5eb38..8558b57 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -1,7 +1,8 @@
 /*
- * PPC64 (POWER4) Huge TLB Page Support for Kernel.
+ * PPC Huge TLB Page Support for Kernel.
  *
  * Copyright (C) 2003 David Gibson, IBM Corporation.
+ * Copyright (C) 2011 Becky Bruce, Freescale Semiconductor
  *
  * Based on the IA-32 version:
  * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
@@ -11,24 +12,40 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/hugetlb.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/moduleparam.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
+#include <asm/setup.h>
 
 #define PAGE_SHIFT_64K	16
 #define PAGE_SHIFT_16M	24
 #define PAGE_SHIFT_16G	34
 
+unsigned int HPAGE_SHIFT;
+
+/*
+ * Tracks gpages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  On 64-bit implementations, this is
+ * just used to track 16G pages and so is a single array.  32-bit
+ * implementations may have more than one gpage size due to limitations
+ * of the memory allocators, so we need multiple arrays
+ */
+#ifdef CONFIG_PPC64
 #define MAX_NUMBER_GPAGES	1024
-
-/* Tracks the 16G pages after the device tree is scanned and before the
- * huge_boot_pages list is ready.  */
-static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
 static unsigned nr_gpages;
-
-/* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
- * will choke on pointers to hugepte tables, which is handy for
- * catching screwups early. */
+#else
+#define MAX_NUMBER_GPAGES	128
+struct psize_gpages {
+	u64 gpage_list[MAX_NUMBER_GPAGES];
+	unsigned int nr_gpages;
+};
+static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#endif
 
 static inline int shift_to_mmu_psize(unsigned int shift)
 {
@@ -49,25 +66,6 @@
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
-static inline pte_t *hugepd_page(hugepd_t hpd)
-{
-	BUG_ON(!hugepd_ok(hpd));
-	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
-}
-
-static inline unsigned int hugepd_shift(hugepd_t hpd)
-{
-	return hpd.pd & HUGEPD_SHIFT_MASK;
-}
-
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
-{
-	unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
-	pte_t *dir = hugepd_page(*hpdp);
-
-	return dir + idx;
-}
-
 pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
 {
 	pgd_t *pg;
@@ -93,7 +91,7 @@
 			if (is_hugepd(pm))
 				hpdp = (hugepd_t *)pm;
 			else if (!pmd_none(*pm)) {
-				return pte_offset_map(pm, ea);
+				return pte_offset_kernel(pm, ea);
 			}
 		}
 	}
@@ -114,8 +112,18 @@
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 			   unsigned long address, unsigned pdshift, unsigned pshift)
 {
-	pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
-				       GFP_KERNEL|__GFP_REPEAT);
+	struct kmem_cache *cachep;
+	pte_t *new;
+
+#ifdef CONFIG_PPC64
+	cachep = PGT_CACHE(pdshift - pshift);
+#else
+	int i;
+	int num_hugepd = 1 << (pshift - pdshift);
+	cachep = hugepte_cache;
+#endif
+
+	new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
 
 	BUG_ON(pshift > HUGEPD_SHIFT_MASK);
 	BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
@@ -124,10 +132,31 @@
 		return -ENOMEM;
 
 	spin_lock(&mm->page_table_lock);
+#ifdef CONFIG_PPC64
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
+		kmem_cache_free(cachep, new);
 	else
-		hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
+		hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+#else
+	/*
+	 * We have multiple higher-level entries that point to the same
+	 * actual pte location.  Fill in each as we go and backtrack on error.
+	 * We need all of these so the DTLB pgtable walk code can find the
+	 * right higher-level entry without knowing if it's a hugepage or not.
+	 */
+	for (i = 0; i < num_hugepd; i++, hpdp++) {
+		if (unlikely(!hugepd_none(*hpdp)))
+			break;
+		else
+			hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
+	}
+	/* If we bailed from the for loop early, an error occurred, clean up */
+	if (i < num_hugepd) {
+		for (i = i - 1 ; i >= 0; i--, hpdp--)
+			hpdp->pd = 0;
+		kmem_cache_free(cachep, new);
+	}
+#endif
 	spin_unlock(&mm->page_table_lock);
 	return 0;
 }
@@ -169,11 +198,132 @@
 	return hugepte_offset(hpdp, addr, pdshift);
 }
 
+#ifdef CONFIG_PPC32
 /* Build list of addresses of gigantic pages.  This function is used in early
  * boot before the buddy or bootmem allocator is setup.
  */
-void add_gpage(unsigned long addr, unsigned long page_size,
-	unsigned long number_of_pages)
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
+{
+	unsigned int idx = shift_to_mmu_psize(__ffs(page_size));
+	int i;
+
+	if (addr == 0)
+		return;
+
+	gpage_freearray[idx].nr_gpages = number_of_pages;
+
+	for (i = 0; i < number_of_pages; i++) {
+		gpage_freearray[idx].gpage_list[i] = addr;
+		addr += page_size;
+	}
+}
+
+/*
+ * Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+	struct huge_bootmem_page *m;
+	int idx = shift_to_mmu_psize(hstate->order + PAGE_SHIFT);
+	int nr_gpages = gpage_freearray[idx].nr_gpages;
+
+	if (nr_gpages == 0)
+		return 0;
+
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * If gpages can be in highmem we can't use the trick of storing the
+	 * data structure in the page; allocate space for this
+	 */
+	m = alloc_bootmem(sizeof(struct huge_bootmem_page));
+	m->phys = gpage_freearray[idx].gpage_list[--nr_gpages];
+#else
+	m = phys_to_virt(gpage_freearray[idx].gpage_list[--nr_gpages]);
+#endif
+
+	list_add(&m->list, &huge_boot_pages);
+	gpage_freearray[idx].nr_gpages = nr_gpages;
+	gpage_freearray[idx].gpage_list[nr_gpages] = 0;
+	m->hstate = hstate;
+
+	return 1;
+}
+/*
+ * Scan the command line hugepagesz= options for gigantic pages; store those in
+ * a list that we use to allocate the memory once all options are parsed.
+ */
+
+unsigned long gpage_npages[MMU_PAGE_COUNT];
+
+static int __init do_gpage_early_setup(char *param, char *val)
+{
+	static phys_addr_t size;
+	unsigned long npages;
+
+	/*
+	 * The hugepagesz and hugepages cmdline options are interleaved.  We
+	 * use the size variable to keep track of whether or not this was done
+	 * properly and skip over instances where it is incorrect.  Other
+	 * command-line parsing code will issue warnings, so we don't need to.
+	 *
+	 */
+	if ((strcmp(param, "default_hugepagesz") == 0) ||
+	    (strcmp(param, "hugepagesz") == 0)) {
+		size = memparse(val, NULL);
+	} else if (strcmp(param, "hugepages") == 0) {
+		if (size != 0) {
+			if (sscanf(val, "%lu", &npages) <= 0)
+				npages = 0;
+			gpage_npages[shift_to_mmu_psize(__ffs(size))] = npages;
+			size = 0;
+		}
+	}
+	return 0;
+}
+
+
+/*
+ * This function allocates physical space for pages that are larger than the
+ * buddy allocator can handle.  We want to allocate these in highmem because
+ * the amount of lowmem is limited.  This means that this function MUST be
+ * called before lowmem_end_addr is set up in MMU_init() in order for the lmb
+ * allocate to grab highmem.
+ */
+void __init reserve_hugetlb_gpages(void)
+{
+	static __initdata char cmdline[COMMAND_LINE_SIZE];
+	phys_addr_t size, base;
+	int i;
+
+	strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE);
+	parse_args("hugetlb gpages", cmdline, NULL, 0, &do_gpage_early_setup);
+
+	/*
+	 * Walk gpage list in reverse, allocating larger page sizes first.
+	 * Skip over unsupported sizes, or sizes that have 0 gpages allocated.
+	 * When we reach the point in the list where pages are no longer
+	 * considered gpages, we're done.
+	 */
+	for (i = MMU_PAGE_COUNT-1; i >= 0; i--) {
+		if (mmu_psize_defs[i].shift == 0 || gpage_npages[i] == 0)
+			continue;
+		else if (mmu_psize_to_shift(i) < (MAX_ORDER + PAGE_SHIFT))
+			break;
+
+		size = (phys_addr_t)(1ULL << mmu_psize_to_shift(i));
+		base = memblock_alloc_base(size * gpage_npages[i], size,
+					   MEMBLOCK_ALLOC_ANYWHERE);
+		add_gpage(base, size, gpage_npages[i]);
+	}
+}
+
+#else /* PPC64 */
+
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages)
 {
 	if (!addr)
 		return;
@@ -199,19 +349,79 @@
 	m->hstate = hstate;
 	return 1;
 }
+#endif
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 {
 	return 0;
 }
 
+#ifdef CONFIG_PPC32
+#define HUGEPD_FREELIST_SIZE \
+	((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
+
+struct hugepd_freelist {
+	struct rcu_head	rcu;
+	unsigned int index;
+	void *ptes[0];
+};
+
+static DEFINE_PER_CPU(struct hugepd_freelist *, hugepd_freelist_cur);
+
+static void hugepd_free_rcu_callback(struct rcu_head *head)
+{
+	struct hugepd_freelist *batch =
+		container_of(head, struct hugepd_freelist, rcu);
+	unsigned int i;
+
+	for (i = 0; i < batch->index; i++)
+		kmem_cache_free(hugepte_cache, batch->ptes[i]);
+
+	free_page((unsigned long)batch);
+}
+
+static void hugepd_free(struct mmu_gather *tlb, void *hugepte)
+{
+	struct hugepd_freelist **batchp;
+
+	batchp = &__get_cpu_var(hugepd_freelist_cur);
+
+	if (atomic_read(&tlb->mm->mm_users) < 2 ||
+	    cpumask_equal(mm_cpumask(tlb->mm),
+			  cpumask_of(smp_processor_id()))) {
+		kmem_cache_free(hugepte_cache, hugepte);
+		return;
+	}
+
+	if (*batchp == NULL) {
+		*batchp = (struct hugepd_freelist *)__get_free_page(GFP_ATOMIC);
+		(*batchp)->index = 0;
+	}
+
+	(*batchp)->ptes[(*batchp)->index++] = hugepte;
+	if ((*batchp)->index == HUGEPD_FREELIST_SIZE) {
+		call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback);
+		*batchp = NULL;
+	}
+}
+#endif
+
 static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
 			      unsigned long start, unsigned long end,
 			      unsigned long floor, unsigned long ceiling)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
-	unsigned shift = hugepd_shift(*hpdp);
+	int i;
+
 	unsigned long pdmask = ~((1UL << pdshift) - 1);
+	unsigned int num_hugepd = 1;
+
+#ifdef CONFIG_PPC64
+	unsigned int shift = hugepd_shift(*hpdp);
+#else
+	/* Note: On 32-bit the hpdp may be the first of several */
+	num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#endif
 
 	start &= pdmask;
 	if (start < floor)
@@ -224,9 +434,15 @@
 	if (end - 1 > ceiling - 1)
 		return;
 
-	hpdp->pd = 0;
+	for (i = 0; i < num_hugepd; i++, hpdp++)
+		hpdp->pd = 0;
+
 	tlb->need_flush = 1;
+#ifdef CONFIG_PPC64
 	pgtable_free_tlb(tlb, hugepte, pdshift - shift);
+#else
+	hugepd_free(tlb, hugepte);
+#endif
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
@@ -331,18 +547,27 @@
 	 * too.
 	 */
 
-	pgd = pgd_offset(tlb->mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
+		pgd = pgd_offset(tlb->mm, addr);
 		if (!is_hugepd(pgd)) {
 			if (pgd_none_or_clear_bad(pgd))
 				continue;
 			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 		} else {
+#ifdef CONFIG_PPC32
+			/*
+			 * Increment next by the size of the huge mapping since
+			 * on 32-bit there may be more than one entry at the pgd
+			 * level for a single hugepage, but all of them point to
+			 * the same kmem cache that holds the hugepte.
+			 */
+			next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
+#endif
 			free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
 					  addr, next, floor, ceiling);
 		}
-	} while (pgd++, addr = next, addr != end);
+	} while (addr = next, addr != end);
 }
 
 struct page *
@@ -477,17 +702,35 @@
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
+#ifdef CONFIG_PPC_MM_SLICES
 	struct hstate *hstate = hstate_file(file);
 	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
 
 	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
+#else
+	return get_unmapped_area(file, addr, len, pgoff, flags);
+#endif
 }
 
 unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
 {
+#ifdef CONFIG_PPC_MM_SLICES
 	unsigned int psize = get_slice_psize(vma->vm_mm, vma->vm_start);
 
 	return 1UL << mmu_psize_to_shift(psize);
+#else
+	if (!is_vm_hugetlb_page(vma))
+		return PAGE_SIZE;
+
+	return huge_page_size(hstate_vma(vma));
+#endif
+}
+
+static inline bool is_power_of_4(unsigned long x)
+{
+	if (is_power_of_2(x))
+		return (__ilog2(x) % 2) ? false : true;
+	return false;
 }
 
 static int __init add_huge_page_size(unsigned long long size)
@@ -497,9 +740,14 @@
 
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable and slice limits. */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	if ((size < PAGE_SIZE) || !is_power_of_4(size))
+		return -EINVAL;
+#else
 	if (!is_power_of_2(size)
 	    || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
 		return -EINVAL;
+#endif
 
 	if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
 		return -EINVAL;
@@ -536,6 +784,46 @@
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
+#ifdef CONFIG_FSL_BOOKE
+struct kmem_cache *hugepte_cache;
+static int __init hugetlbpage_init(void)
+{
+	int psize;
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		unsigned shift;
+
+		if (!mmu_psize_defs[psize].shift)
+			continue;
+
+		shift = mmu_psize_to_shift(psize);
+
+		/* Don't treat normal page sizes as huge... */
+		if (shift != PAGE_SHIFT)
+			if (add_huge_page_size(1ULL << shift) < 0)
+				continue;
+	}
+
+	/*
+	 * Create a kmem cache for hugeptes.  The bottom bits in the pte have
+	 * size information encoded in them, so align them to allow this
+	 */
+	hugepte_cache =  kmem_cache_create("hugepte-cache", sizeof(pte_t),
+					   HUGEPD_SHIFT_MASK + 1, 0, NULL);
+	if (hugepte_cache == NULL)
+		panic("%s: Unable to create kmem cache for hugeptes\n",
+		      __func__);
+
+	/* Default hpage size = 4M */
+	if (mmu_psize_defs[MMU_PAGE_4M].shift)
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_4M].shift;
+	else
+		panic("%s: Unable to set default huge page size\n", __func__);
+
+
+	return 0;
+}
+#else
 static int __init hugetlbpage_init(void)
 {
 	int psize;
@@ -578,15 +866,23 @@
 
 	return 0;
 }
-
+#endif
 module_init(hugetlbpage_init);
 
 void flush_dcache_icache_hugepage(struct page *page)
 {
 	int i;
+	void *start;
 
 	BUG_ON(!PageCompound(page));
 
-	for (i = 0; i < (1UL << compound_order(page)); i++)
-		__flush_dcache_icache(page_address(page+i));
+	for (i = 0; i < (1UL << compound_order(page)); i++) {
+		if (!PageHighMem(page)) {
+			__flush_dcache_icache(page_address(page+i));
+		} else {
+			start = kmap_atomic(page+i, KM_PPC_SYNC_ICACHE);
+			__flush_dcache_icache(start);
+			kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+		}
+	}
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index c77fef5..161cefd 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -32,6 +32,8 @@
 #include <linux/pagemap.h>
 #include <linux/memblock.h>
 #include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -44,6 +46,7 @@
 #include <asm/tlb.h>
 #include <asm/sections.h>
 #include <asm/system.h>
+#include <asm/hugetlb.h>
 
 #include "mmu_decl.h"
 
@@ -123,6 +126,12 @@
 	/* parse args from command line */
 	MMU_setup();
 
+	/*
+	 * Reserve gigantic pages for hugetlb.  This MUST occur before
+	 * lowmem_end_addr is initialized below.
+	 */
+	reserve_hugetlb_gpages();
+
 	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
 		memblock.memory.cnt = 1;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c781bbc..2dd6bdd 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -17,7 +17,7 @@
  *
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -34,6 +34,7 @@
 #include <linux/suspend.h>
 #include <linux/memblock.h>
 #include <linux/hugetlb.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -123,7 +124,8 @@
 	pgdata = NODE_DATA(nid);
 
 	start = (unsigned long)__va(start);
-	create_section_mapping(start, start + size);
+	if (create_section_mapping(start, start + size))
+		return -EINVAL;
 
 	/* this should work for most non-highmem platforms */
 	zone = pgdata->node_zones;
@@ -548,4 +550,38 @@
 		return;
 	hash_preload(vma->vm_mm, address, access, trap);
 #endif /* CONFIG_PPC_STD_MMU */
+#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \
+	&& defined(CONFIG_HUGETLB_PAGE)
+	if (is_vm_hugetlb_page(vma))
+		book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
+#endif
 }
+
+/*
+ * System memory should not be in /proc/iomem but various tools expect it
+ * (eg kdump).
+ */
+static int add_system_ram_resources(void)
+{
+	struct memblock_region *reg;
+
+	for_each_memblock(memory, reg) {
+		struct resource *res;
+		unsigned long base = reg->base;
+		unsigned long size = reg->size;
+
+		res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+		WARN_ON(!res);
+
+		if (res) {
+			res->name = "System RAM";
+			res->start = base;
+			res->end = base + size - 1;
+			res->flags = IORESOURCE_MEM;
+			WARN_ON(request_resource(&iomem_resource, res) < 0);
+		}
+	}
+
+	return 0;
+}
+subsys_initcall(add_system_ram_resources);
diff --git a/arch/powerpc/mm/mmu_context_hash32.c b/arch/powerpc/mm/mmu_context_hash32.c
index d0ee554..78fef67 100644
--- a/arch/powerpc/mm/mmu_context_hash32.c
+++ b/arch/powerpc/mm/mmu_context_hash32.c
@@ -24,6 +24,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/export.h>
 
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 3bafc3d..ca988a3 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -18,7 +18,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
 
@@ -136,8 +136,8 @@
 	if (!mm || !acop)
 		return -EINVAL;
 
-	/* We need to make sure mm_users doesn't change */
-	down_read(&mm->mmap_sem);
+	/* The page_table_lock ensures mm_users won't change under us */
+	spin_lock(&mm->page_table_lock);
 	spin_lock(mm->context.cop_lockp);
 
 	if (mm->context.cop_pid == COP_PID_NONE) {
@@ -164,7 +164,7 @@
 
 out:
 	spin_unlock(mm->context.cop_lockp);
-	up_read(&mm->mmap_sem);
+	spin_unlock(&mm->page_table_lock);
 
 	return ret;
 }
@@ -185,8 +185,8 @@
 	if (WARN_ON_ONCE(!mm))
 		return;
 
-	/* We need to make sure mm_users doesn't change */
-	down_read(&mm->mmap_sem);
+	/* The page_table_lock ensures mm_users won't change under us */
+	spin_lock(&mm->page_table_lock);
 	spin_lock(mm->context.cop_lockp);
 
 	mm->context.acop &= ~acop;
@@ -213,7 +213,7 @@
 	}
 
 	spin_unlock(mm->context.cop_lockp);
-	up_read(&mm->mmap_sem);
+	spin_unlock(&mm->page_table_lock);
 }
 EXPORT_SYMBOL_GPL(drop_cop);
 
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 336807d..5b63bd3 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -292,6 +292,11 @@
 	mm->context.id = MMU_NO_CONTEXT;
 	mm->context.active = 0;
 
+#ifdef CONFIG_PPC_MM_SLICES
+	if (slice_mm_new_context(mm))
+		slice_set_user_psize(mm, mmu_virtual_psize);
+#endif
+
 	return 0;
 }
 
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index dd0a258..83eb5d5 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -142,6 +142,8 @@
 
 #elif defined(CONFIG_PPC_FSL_BOOK3E)
 extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx);
+extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+				 phys_addr_t phys);
 #ifdef CONFIG_PPC32
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 2164006..b22a83a 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
@@ -315,7 +315,10 @@
 	struct device_node *root;
 	const char *vec5;
 
-	root = of_find_node_by_path("/rtas");
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		root = of_find_node_by_path("/ibm,opal");
+	else
+		root = of_find_node_by_path("/rtas");
 	if (!root)
 		root = of_find_node_by_path("/");
 
@@ -344,12 +347,19 @@
 
 #define VEC5_AFFINITY_BYTE	5
 #define VEC5_AFFINITY		0x80
-	chosen = of_find_node_by_path("/chosen");
-	if (chosen) {
-		vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
-		if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
-			dbg("Using form 1 affinity\n");
-			form1_affinity = 1;
+
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		form1_affinity = 1;
+	else {
+		chosen = of_find_node_by_path("/chosen");
+		if (chosen) {
+			vec5 = of_get_property(chosen,
+					       "ibm,architecture-vec-5", NULL);
+			if (vec5 && (vec5[VEC5_AFFINITY_BYTE] &
+							VEC5_AFFINITY)) {
+				dbg("Using form 1 affinity\n");
+				form1_affinity = 1;
+			}
 		}
 	}
 
@@ -709,8 +719,7 @@
 
 static int __init parse_numa_properties(void)
 {
-	struct device_node *cpu = NULL;
-	struct device_node *memory = NULL;
+	struct device_node *memory;
 	int default_nid = 0;
 	unsigned long i;
 
@@ -732,6 +741,7 @@
 	 * each node to be onlined must have NODE_DATA etc backing it.
 	 */
 	for_each_present_cpu(i) {
+		struct device_node *cpu;
 		int nid;
 
 		cpu = of_get_cpu_node(i, NULL);
@@ -750,8 +760,8 @@
 	}
 
 	get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
-	memory = NULL;
-	while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
+
+	for_each_node_by_type(memory, "memory") {
 		unsigned long start;
 		unsigned long size;
 		int nid;
@@ -800,8 +810,9 @@
 	}
 
 	/*
-	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
-	 * property in the ibm,dynamic-reconfiguration-memory node.
+	 * Now do the same thing for each MEMBLOCK listed in the
+	 * ibm,dynamic-memory property in the
+	 * ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
 	if (memory)
@@ -1187,10 +1198,10 @@
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
-	struct device_node *memory = NULL;
+	struct device_node *memory;
 	int nid = -1;
 
-	while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
+	for_each_node_by_type(memory, "memory") {
 		unsigned long start, size;
 		int ranges;
 		const unsigned int *memcell_buf;
@@ -1214,11 +1225,12 @@
 			break;
 		}
 
-		of_node_put(memory);
 		if (nid >= 0)
 			break;
 	}
 
+	of_node_put(memory);
+
 	return nid;
 }
 
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index af40c87..214130a 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/hardirq.h>
+#include <linux/hugetlb.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -212,7 +213,7 @@
 	entry = set_access_flags_filter(entry, vma, dirty);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
-		if (!(vma->vm_flags & VM_HUGETLB))
+		if (!is_vm_hugetlb_page(vma))
 			assert_pte_locked(vma->vm_mm, address);
 		__ptep_set_access_flags(ptep, entry);
 		flush_tlb_page_nohash(vma, address);
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 6e595f6..ad36ede4 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index ba51948..73709f7 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -29,7 +29,7 @@
 #include <linux/pagemap.h>
 #include <linux/err.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/mman.h>
 #include <asm/mmu.h>
 #include <asm/spu.h>
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 9a445f6..558e30c 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
+#include <linux/export.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 4ebb34b..dc4a5f3 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -553,24 +553,24 @@
 	rldicl	r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	virt_page_table_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	virt_page_table_tlb_miss_fault
 
 #ifndef CONFIG_PPC_64K_PAGES
 	/* Get to PUD entry */
 	rldicl	r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	virt_page_table_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	virt_page_table_tlb_miss_fault
 #endif /* CONFIG_PPC_64K_PAGES */
 
 	/* Get to PMD entry */
 	rldicl	r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	virt_page_table_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	virt_page_table_tlb_miss_fault
 
 	/* Ok, we're all right, we can now create a kernel translation for
 	 * a 4K or 64K page from r16 -> r15.
@@ -802,24 +802,24 @@
 	rldicl	r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	htw_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	htw_tlb_miss_fault
 
 #ifndef CONFIG_PPC_64K_PAGES
 	/* Get to PUD entry */
 	rldicl	r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	htw_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	htw_tlb_miss_fault
 #endif /* CONFIG_PPC_64K_PAGES */
 
 	/* Get to PMD entry */
 	rldicl	r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
 	clrrdi	r10,r11,3
 	ldx	r15,r10,r15
-	cmpldi	cr0,r15,0
-	beq	htw_tlb_miss_fault
+	cmpdi	cr0,r15,0
+	bge	htw_tlb_miss_fault
 
 	/* Ok, we're all right, we can now create an indirect entry for
 	 * a 1M or 256M page.
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d32ec64..4e13d6f 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -28,6 +28,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
@@ -36,14 +37,49 @@
 #include <linux/spinlock.h>
 #include <linux/memblock.h>
 #include <linux/of_fdt.h>
+#include <linux/hugetlb.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/code-patching.h>
+#include <asm/hugetlb.h>
 
 #include "mmu_decl.h"
 
-#ifdef CONFIG_PPC_BOOK3E
+/*
+ * This struct lists the sw-supported page sizes.  The hardawre MMU may support
+ * other sizes not listed here.   The .ind field is only used on MMUs that have
+ * indirect page table entries.
+ */
+#ifdef CONFIG_PPC_BOOK3E_MMU
+#ifdef CONFIG_FSL_BOOKE
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+	[MMU_PAGE_4K] = {
+		.shift	= 12,
+		.enc	= BOOK3E_PAGESZ_4K,
+	},
+	[MMU_PAGE_4M] = {
+		.shift	= 22,
+		.enc	= BOOK3E_PAGESZ_4M,
+	},
+	[MMU_PAGE_16M] = {
+		.shift	= 24,
+		.enc	= BOOK3E_PAGESZ_16M,
+	},
+	[MMU_PAGE_64M] = {
+		.shift	= 26,
+		.enc	= BOOK3E_PAGESZ_64M,
+	},
+	[MMU_PAGE_256M] = {
+		.shift	= 28,
+		.enc	= BOOK3E_PAGESZ_256M,
+	},
+	[MMU_PAGE_1G] = {
+		.shift	= 30,
+		.enc	= BOOK3E_PAGESZ_1GB,
+	},
+};
+#else
 struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
@@ -77,6 +113,8 @@
 		.enc	= BOOK3E_PAGESZ_1GB,
 	},
 };
+#endif /* CONFIG_FSL_BOOKE */
+
 static inline int mmu_get_tsize(int psize)
 {
 	return mmu_psize_defs[psize].enc;
@@ -87,7 +125,7 @@
 	/* This isn't used on !Book3E for now */
 	return 0;
 }
-#endif
+#endif /* CONFIG_PPC_BOOK3E_MMU */
 
 /* The variables below are currently only used on 64-bit Book3E
  * though this will probably be made common with other nohash
@@ -266,6 +304,11 @@
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
+#ifdef CONFIG_HUGETLB_PAGE
+	if (is_vm_hugetlb_page(vma))
+		flush_hugetlb_page(vma, vmaddr);
+#endif
+
 	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
 			 mmu_get_tsize(mmu_virtual_psize), 0);
 }
@@ -600,13 +643,28 @@
 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 				phys_addr_t first_memblock_size)
 {
-	/* On Embedded 64-bit, we adjust the RMA size to match
+	/* On non-FSL Embedded 64-bit, we adjust the RMA size to match
 	 * the bolted TLB entry. We know for now that only 1G
 	 * entries are supported though that may eventually
-	 * change. We crop it to the size of the first MEMBLOCK to
+	 * change.
+	 *
+	 * on FSL Embedded 64-bit, we adjust the RMA size to match the
+	 * first bolted TLB entry size.  We still limit max to 1G even if
+	 * the TLB could cover more.  This is due to what the early init
+	 * code is setup to do.
+	 *
+	 * We crop it to the size of the first MEMBLOCK to
 	 * avoid going over total available memory just in case...
 	 */
-	ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+		unsigned long linear_sz;
+		linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET,
+					first_memblock_base);
+		ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
+	} else
+#endif
+		ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
 
 	/* Finally limit subsequent allocations */
 	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index b5d8706..1530229 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -32,14 +32,6 @@
 	help
 	  This option enables support for the EP405/EP405PC boards.
 
-config HCU4
-	bool "Hcu4"
-	depends on 40x
-	default n
-	select 405GPR
-	help
-	  This option enables support for the Nestal Maschinen HCU4 board.
-
 config HOTFOOT
         bool "Hotfoot"
 	depends on 40x
@@ -115,11 +107,6 @@
 	help
 	  This option enables the simple PowerPC 40x platform support.
 
-# 40x specific CPU modules, selected based on the board above.
-config NP405H
-	bool
-	#depends on ASH
-
 # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
 config 403GCX
 	bool
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 56e8900..88c22de 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_HCU4)				+= hcu4.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c
deleted file mode 100644
index 60b2afe..0000000
--- a/arch/powerpc/platforms/40x/hcu4.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id hcu4_of_bus[] = {
-	{ .compatible = "ibm,plb3", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init hcu4_device_probe(void)
-{
-	of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
-	return 0;
-}
-machine_device_initcall(hcu4, hcu4_device_probe);
-
-static int __init hcu4_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
-		return 0;
-
-	return 1;
-}
-
-define_machine(hcu4) {
-	.name			= "HCU4",
-	.probe			= hcu4_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= uic_init_tree,
-	.get_irq		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 8f77139..4cfa499 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -18,6 +18,7 @@
 #include <linux/of_gpio.h>
 #include <linux/of_i2c.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 27b0651..b3ebce1 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -6,6 +6,7 @@
 	select PPC_CLOCK
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 3dc2a8d..1d8700f 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..846b789 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anon,charon",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 41f3a7e..369fd54 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 6c39b9c..f94f06e 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -67,6 +67,7 @@
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 #include <asm/div64.h>
 #include <asm/mpc52xx.h>
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 9940ce8..d61fb1c 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -14,6 +14,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c
index 428c5e0..3661bcd 100644
--- a/arch/powerpc/platforms/82xx/km82xx.c
+++ b/arch/powerpc/platforms/82xx/km82xx.c
@@ -49,6 +49,9 @@
 };
 
 static __initdata struct cpm_pin km82xx_pins[] = {
+	/* SMC1 */
+	{2, 4, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 
 	/* SMC2 */
 	{0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -137,6 +140,7 @@
 	}
 
 	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+	cpm2_smc_clk_setup(CPM_CLK_SMC1, CPM_BRG7);
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX);
 	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX);
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 73f4135..670a033 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -114,18 +114,21 @@
 
 endif
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC831x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for math-emu
 config PPC_MPC832x
 	bool
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC834x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC837x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index 70798ac..ef6537b 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -21,6 +21,8 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/reboot.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 
@@ -30,6 +32,7 @@
  */
 #define MCU_REG_CTRL	0x20
 #define MCU_CTRL_POFF	0x40
+#define MCU_CTRL_BTN	0x80
 
 #define MCU_NUM_GPIO	2
 
@@ -42,13 +45,55 @@
 
 static struct mcu *glob_mcu;
 
+struct task_struct *shutdown_thread;
+static int shutdown_thread_fn(void *data)
+{
+	int ret;
+	struct mcu *mcu = glob_mcu;
+
+	while (!kthread_should_stop()) {
+		ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+		if (ret < 0)
+			pr_err("MCU status reg read failed.\n");
+		mcu->reg_ctrl = ret;
+
+
+		if (mcu->reg_ctrl & MCU_CTRL_BTN) {
+			i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+						  mcu->reg_ctrl & ~MCU_CTRL_BTN);
+
+			ctrl_alt_del();
+		}
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+	return 0;
+}
+
+static ssize_t show_status(struct device *d,
+			   struct device_attribute *attr, char *buf)
+{
+	int ret;
+	struct mcu *mcu = glob_mcu;
+
+	ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+	if (ret < 0)
+		return -ENODEV;
+	mcu->reg_ctrl = ret;
+
+	return sprintf(buf, "%02x\n", ret);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
 static void mcu_power_off(void)
 {
 	struct mcu *mcu = glob_mcu;
 
 	pr_info("Sending power-off request to the MCU...\n");
 	mutex_lock(&mcu->lock);
-	i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+	i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
 				  mcu->reg_ctrl | MCU_CTRL_POFF);
 	mutex_unlock(&mcu->lock);
 }
@@ -130,6 +175,13 @@
 		dev_info(&client->dev, "will provide power-off service\n");
 	}
 
+	if (device_create_file(&client->dev, &dev_attr_status))
+		dev_err(&client->dev,
+			"couldn't create device file for status\n");
+
+	shutdown_thread = kthread_run(shutdown_thread_fn, NULL,
+				      "mcu-i2c-shdn");
+
 	return 0;
 err:
 	kfree(mcu);
@@ -141,6 +193,10 @@
 	struct mcu *mcu = i2c_get_clientdata(client);
 	int ret;
 
+	kthread_stop(shutdown_thread);
+
+	device_remove_file(&client->dev, &dev_attr_status);
+
 	if (glob_mcu == mcu) {
 		ppc_md.power_off = NULL;
 		glob_mcu = NULL;
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 104faa8..edf6687 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -21,6 +21,7 @@
 #include <linux/suspend.h>
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
+#include <linux/export.h>
 
 #include <asm/reg.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 12f5932..d7946be2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -171,17 +171,18 @@
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-config P2040_RDB
-	bool "Freescale P2040 RDB"
+config P2041_RDB
+	bool "Freescale P2041 RDB"
 	select DEFAULT_UIMAGE
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
-	  This option enables support for the P2040 RDB board
+	  This option enables support for the P2041 RDB board
 
 config P3041_DS
 	bool "Freescale P3041 DS"
@@ -189,19 +190,33 @@
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
 	  This option enables support for the P3041 DS board
 
+config P3060_QDS
+	bool "Freescale P3060 QDS"
+	select DEFAULT_UIMAGE
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select GPIO_MPC8XXX
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the P3060 QDS board
+
 config P4080_DS
 	bool "Freescale P4080 DS"
 	select DEFAULT_UIMAGE
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
@@ -216,7 +231,8 @@
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a971b32..bc5acb9 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -13,8 +13,9 @@
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_P2040_RDB)   += p2040_rdb.o corenet_ds.o
+obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
+obj-$(CONFIG_P3060_QDS)   += p3060_qds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 2bf9978..66cb8d6 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -23,7 +23,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/initrd.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 973b3f4..a23a3ff 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/initrd.h>
-#include <linux/module.h>
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index c01c727..fda1571 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -129,17 +129,20 @@
  */
 static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
-	struct device_node *pixis_node;
+	struct device_node *np;
 	void __iomem *pixis;
 	u8 __iomem *brdcfg1;
 
-	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
-	if (!pixis_node) {
+	np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+	if (!np)
+		/* older device trees used "fsl,p1022ds-pixis" */
+		np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+	if (!np) {
 		pr_err("p1022ds: missing ngPIXIS node\n");
 		return;
 	}
 
-	pixis = of_iomap(pixis_node, 0);
+	pixis = of_iomap(np, 0);
 	if (!pixis) {
 		pr_err("p1022ds: could not map ngPIXIS registers\n");
 		return;
diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c
similarity index 82%
rename from arch/powerpc/platforms/85xx/p2040_rdb.c
rename to arch/powerpc/platforms/85xx/p2041_rdb.c
index 32b56ac..eda6ed5 100644
--- a/arch/powerpc/platforms/85xx/p2040_rdb.c
+++ b/arch/powerpc/platforms/85xx/p2041_rdb.c
@@ -1,5 +1,5 @@
 /*
- * P2040 RDB Setup
+ * P2041 RDB Setup
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,18 +35,18 @@
 /*
  * Called very early, device-tree isn't unflattened
  */
-static int __init p2040_rdb_probe(void)
+static int __init p2041_rdb_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 #ifdef CONFIG_SMP
 	extern struct smp_ops_t smp_85xx_ops;
 #endif
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
 		return 1;
 
 	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
 		ppc_md.init_IRQ = ehv_pic_init;
 		ppc_md.get_irq = ehv_pic_get_irq;
 		ppc_md.restart = fsl_hv_restart;
@@ -66,9 +66,9 @@
 	return 0;
 }
 
-define_machine(p2040_rdb) {
-	.name			= "P2040 RDB",
-	.probe			= p2040_rdb_probe,
+define_machine(p2041_rdb) {
+	.name			= "P2041 RDB",
+	.probe			= p2041_rdb_probe,
 	.setup_arch		= corenet_ds_setup_arch,
 	.init_IRQ		= corenet_ds_pic_init,
 #ifdef CONFIG_PCI
@@ -81,8 +81,8 @@
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
+machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
 #endif
diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p3060_qds.c
similarity index 73%
copy from arch/powerpc/platforms/85xx/p2040_rdb.c
copy to arch/powerpc/platforms/85xx/p3060_qds.c
index 32b56ac..081cf4a 100644
--- a/arch/powerpc/platforms/85xx/p2040_rdb.c
+++ b/arch/powerpc/platforms/85xx/p3060_qds.c
@@ -1,5 +1,5 @@
 /*
- * P2040 RDB Setup
+ * P3060 QDS Setup
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -10,43 +10,32 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
-
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/ehv_pic.h>
-
 #include "corenet_ds.h"
 
 /*
  * Called very early, device-tree isn't unflattened
  */
-static int __init p2040_rdb_probe(void)
+static int __init p3060_qds_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 #ifdef CONFIG_SMP
 	extern struct smp_ops_t smp_85xx_ops;
 #endif
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
+	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
 		return 1;
 
 	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
+	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
 		ppc_md.init_IRQ = ehv_pic_init;
 		ppc_md.get_irq = ehv_pic_get_irq;
 		ppc_md.restart = fsl_hv_restart;
@@ -56,7 +45,7 @@
 		/*
 		 * Disable the timebase sync operations because we can't write
 		 * to the timebase registers under the hypervisor.
-		  */
+		 */
 		smp_85xx_ops.give_timebase = NULL;
 		smp_85xx_ops.take_timebase = NULL;
 #endif
@@ -66,9 +55,9 @@
 	return 0;
 }
 
-define_machine(p2040_rdb) {
-	.name			= "P2040 RDB",
-	.probe			= p2040_rdb_probe,
+define_machine(p3060_qds) {
+	.name			= "P3060 QDS",
+	.probe			= p3060_qds_probe,
 	.setup_arch		= corenet_ds_setup_arch,
 	.init_IRQ		= corenet_ds_pic_init,
 #ifdef CONFIG_PCI
@@ -81,8 +70,8 @@
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
+machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
 #endif
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index d07dcb7..14632a9 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -26,7 +26,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/initrd.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/of_platform.h>
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 09ced72..cebd786 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -283,7 +283,7 @@
 
 	of_address_to_resource(np, 0, &res);
 
-	printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+	printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
 
 	brstcr = ioremap(res.start, resource_size(&res));
 	if(!brstcr)
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 5b9b901..2df4785 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -48,10 +48,11 @@
 	const u64 *cpu_rel_addr;
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
-	int n = 0;
+	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
 
-	WARN_ON (nr < 0 || nr >= NR_CPUS);
+	WARN_ON(nr < 0 || nr >= NR_CPUS);
+	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
@@ -79,7 +80,7 @@
 
 	local_irq_save(flags);
 
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
+	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
 #ifdef CONFIG_PPC32
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -88,7 +89,7 @@
 				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
+	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
 		mdelay(1);
 #else
 	smp_generic_kick_cpu(nr);
@@ -206,7 +207,7 @@
 	if ( !timeout )
 		printk(KERN_ERR "Unable to bring down secondary cpu(s)");
 
-	for (i = 0; i < num_cpus; i++)
+	for_each_online_cpu(i)
 	{
 		if ( i == smp_processor_id() ) continue;
 		mpic_reset_core(i);
@@ -243,6 +244,7 @@
 		 * If left NULL, .message_pass defaults to
 		 * smp_muxed_ipi_message_pass
 		 */
+		smp_85xx_ops.message_pass = NULL;
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}
 
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index a0b5638..8d6599d 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -4,6 +4,7 @@
 	depends on 6xx
 	select FSL_SOC
 	select ALTIVEC
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  The Freescale E600 SoCs have 74xx cores.
 
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index 4ff7b1e..2a70336 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -27,6 +27,7 @@
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define GEF_GPIO_DIRECT		0x00
 #define GEF_GPIO_IN		0x04
diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
index b71c650..528e00d 100644
--- a/arch/powerpc/platforms/8xx/tqm8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -18,7 +18,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index b9ba861..3fe6d92 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,5 +1,6 @@
 menu "Platform support"
 
+source "arch/powerpc/platforms/powernv/Kconfig"
 source "arch/powerpc/platforms/pseries/Kconfig"
 source "arch/powerpc/platforms/iseries/Kconfig"
 source "arch/powerpc/platforms/chrp/Kconfig"
@@ -333,16 +334,6 @@
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
-config MPC8xxx_GPIO
-	bool "MPC512x/MPC8xxx GPIO support"
-	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
-		   FSL_SOC_BOOKE || PPC_86xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here if you're going to use hardware that connects to the
-	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
-
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC
@@ -355,8 +346,8 @@
 	  on-board peripherals.
 
 config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
+	bool "MPC8349E-mITX MCU driver"
+	depends on I2C=y && PPC_83xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e06e395..fbecae0 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -69,6 +69,7 @@
 	bool "Server processors"
 	select PPC_FPU
 	select PPC_HAVE_PMU_SUPPORT
+	select SYS_SUPPORTS_HUGETLBFS
 
 config PPC_BOOK3E_64
 	bool "Embedded processors"
@@ -173,6 +174,7 @@
 config FSL_BOOKE
 	bool
 	depends on (E200 || E500) && PPC32
+	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
 	default y
 
 # this is for common code between PPC32 & PPC64 FSL BOOKE
@@ -282,21 +284,13 @@
 	def_bool y
 	depends on !PPC_STD_MMU
 
-config PPC_MMU_NOHASH_32
-	def_bool y
-	depends on PPC_MMU_NOHASH && PPC32
-
-config PPC_MMU_NOHASH_64
-	def_bool y
-	depends on PPC_MMU_NOHASH && PPC64
-
 config PPC_BOOK3E_MMU
 	def_bool y
 	depends on FSL_BOOKE || PPC_BOOK3E
 
 config PPC_MM_SLICES
 	bool
-	default y if HUGETLB_PAGE || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+	default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 73e2116..2635a22 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -14,6 +14,7 @@
 obj-$(CONFIG_PPC_83xx)		+= 83xx/
 obj-$(CONFIG_FSL_SOC_BOOKE)	+= 85xx/
 obj-$(CONFIG_PPC_86xx)		+= 86xx/
+obj-$(CONFIG_PPC_POWERNV)	+= powernv/
 obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)	+= iseries/
 obj-$(CONFIG_PPC_MAPLE)		+= maple/
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index ac06903..40a6e34 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
+#include <linux/export.h>
 #include <linux/of_platform.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c
index 48c690e..852592b 100644
--- a/arch/powerpc/platforms/cell/beat.c
+++ b/arch/powerpc/platforms/cell/beat.c
@@ -18,7 +18,7 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/rtc.h>
@@ -230,7 +230,7 @@
 		}
 		ev->virq = virq;
 
-		rc = request_irq(virq, ev->handler, IRQF_DISABLED,
+		rc = request_irq(virq, ev->handler, 0,
 				      ev->typecode, NULL);
 		if (rc != 0) {
 			printk(KERN_ERR "Beat: failed to request virtual IRQ"
diff --git a/arch/powerpc/platforms/cell/beat_spu_priv1.c b/arch/powerpc/platforms/cell/beat_spu_priv1.c
index bcc17f7..13f5258 100644
--- a/arch/powerpc/platforms/cell/beat_spu_priv1.c
+++ b/arch/powerpc/platforms/cell/beat_spu_priv1.c
@@ -18,8 +18,6 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
-#include <linux/module.h>
-
 #include <asm/types.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
diff --git a/arch/powerpc/platforms/cell/beat_wrapper.h b/arch/powerpc/platforms/cell/beat_wrapper.h
index b47dfda..c110996 100644
--- a/arch/powerpc/platforms/cell/beat_wrapper.h
+++ b/arch/powerpc/platforms/cell/beat_wrapper.h
@@ -20,6 +20,7 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
 #ifndef BEAT_HCALL
+#include <linux/string.h>
 #include "beat_syscall.h"
 
 /* defined in hvCall.S */
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
index bfa2c0c..d4c39e3 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/cpufreq.h>
+#include <linux/module.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 3233fe8..60a07a4 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/timer.h>
+#include <linux/module.h>
 #include <linux/of_platform.h>
 
 #include <asm/processor.h>
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
index f75a4da..2bb8031 100644
--- a/arch/powerpc/platforms/cell/cbe_powerbutton.c
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/input.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <asm/pmi.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index f3917e7..1428d58 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -8,7 +8,7 @@
 
 #include <linux/percpu.h>
 #include <linux/types.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index ae790ac..14be2bd 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -514,7 +514,7 @@
 	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 				     oirq.size);
 	if (request_irq(virq, pciex_handle_internal_irq,
-			IRQF_DISABLED, "pciex", (void *)phb)) {
+			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");
 		goto error;
 	}
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index d58d9ba..1d5a4d8 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -30,6 +30,7 @@
 #include <linux/cpu.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
index 7f92096..23bc9db 100644
--- a/arch/powerpc/platforms/cell/cpufreq_spudemand.c
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -22,6 +22,7 @@
 
 #include <linux/cpufreq.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 #include <linux/atomic.h>
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 3e4eba6..96a433d 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -31,7 +31,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/percpu.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 26a0671..592c3d5 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -412,8 +412,7 @@
 			IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
 	BUG_ON(virq == NO_IRQ);
 
-	ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
-			iommu->name, iommu);
+	ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
 	BUG_ON(ret);
 
 	/* set the IOC segment table origin register (and turn on the iommu) */
@@ -1159,6 +1158,26 @@
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
 
+static u64 cell_dma_get_required_mask(struct device *dev)
+{
+	struct dma_map_ops *dma_ops;
+
+	if (!dev->dma_mask)
+		return 0;
+
+	if (!iommu_fixed_disabled &&
+			cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
+		return DMA_BIT_MASK(64);
+
+	dma_ops = get_dma_ops(dev);
+	if (dma_ops->get_required_mask)
+		return dma_ops->get_required_mask(dev);
+
+	WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops);
+
+	return DMA_BIT_MASK(64);
+}
+
 static int __init cell_iommu_init(void)
 {
 	struct device_node *np;
@@ -1175,6 +1194,7 @@
 
 	/* Setup various ppc_md. callbacks */
 	ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
+	ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
 	ppc_md.tce_build = tce_build_cell;
 	ppc_md.tce_free = tce_free_cell;
 
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 69ed0d7f..59c1a16 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -24,6 +24,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/types.h>
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/irq_regs.h>
 #include <asm/machdep.h>
@@ -391,7 +392,7 @@
 		}
 
 		rc = request_irq(irq, cbe_pm_irq,
-				 IRQF_DISABLED, "cbe-pmu-0", NULL);
+				 0, "cbe-pmu-0", NULL);
 		if (rc) {
 			printk("ERROR: Request for irq on node %d failed\n",
 			       node);
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index 51e2901..7f9b674 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/console.h>
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index c73cf4c..0fc9b72 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
+#include <linux/export.h>
 #include <linux/unistd.h>
 #include <linux/user.h>
 #include <linux/reboot.h>
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f2e1dfe..f5c5c76 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -15,7 +15,6 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 3675da7..e94d3ec 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -442,8 +442,7 @@
 		snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
 			 spu->number);
 		ret = request_irq(spu->irqs[0], spu_irq_class_0,
-				  IRQF_DISABLED,
-				  spu->irq_c0, spu);
+				  0, spu->irq_c0, spu);
 		if (ret)
 			goto bail0;
 	}
@@ -451,8 +450,7 @@
 		snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
 			 spu->number);
 		ret = request_irq(spu->irqs[1], spu_irq_class_1,
-				  IRQF_DISABLED,
-				  spu->irq_c1, spu);
+				  0, spu->irq_c1, spu);
 		if (ret)
 			goto bail1;
 	}
@@ -460,8 +458,7 @@
 		snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
 			 spu->number);
 		ret = request_irq(spu->irqs[2], spu_irq_class_2,
-				  IRQF_DISABLED,
-				  spu->irq_c2, spu);
+				  0, spu->irq_c2, spu);
 		if (ret)
 			goto bail2;
 	}
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index fec1495..75d6133 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -5,7 +5,7 @@
 #undef DEBUG
 
 #include <linux/kallsyms.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/syscalls.h>
 
 #include <asm/spu.h>
diff --git a/arch/powerpc/platforms/cell/spu_fault.c b/arch/powerpc/platforms/cell/spu_fault.c
index d06ba87..641e727 100644
--- a/arch/powerpc/platforms/cell/spu_fault.c
+++ b/arch/powerpc/platforms/cell/spu_fault.c
@@ -22,7 +22,7 @@
  */
 #include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/spu.h>
 #include <asm/spu_csa.h>
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 4e5c914..2bb6977 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -21,7 +21,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/list.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/ptrace.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
diff --git a/arch/powerpc/platforms/cell/spu_notify.c b/arch/powerpc/platforms/cell/spu_notify.c
index 34d1569..afdf857 100644
--- a/arch/powerpc/platforms/cell/spu_notify.c
+++ b/arch/powerpc/platforms/cell/spu_notify.c
@@ -21,7 +21,8 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/notifier.h>
 #include <asm/spu.h>
 #include "spufs/spufs.h"
 
diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index 121aec3..66d3372 100644
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -20,7 +20,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c
index 64eb15b..6e8a9ef 100644
--- a/arch/powerpc/platforms/cell/spufs/backing_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c
@@ -21,7 +21,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index bf4d41d..9c6790d 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -22,9 +22,9 @@
 
 #include <linux/fs.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <asm/spu.h>
 #include <asm/spu_csa.h>
 #include "spufs.h"
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 6cf3ec6..03c5fce 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -26,7 +26,6 @@
 #include <linux/fs.h>
 #include <linux/gfp.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/syscalls.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
index a4dd3ae..8cb6260 100644
--- a/arch/powerpc/platforms/cell/spufs/fault.c
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -21,7 +21,6 @@
  */
 #include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 
 #include <asm/spu.h>
 #include <asm/spu_csa.h>
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index fb59c46..0cfece4 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -24,7 +24,7 @@
 
 #include <linux/fs.h>
 #include <linux/ioctl.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pagemap.h>
 #include <linux/poll.h>
 #include <linux/ptrace.h>
diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c
index 64f8540..8655c4c 100644
--- a/arch/powerpc/platforms/cell/spufs/hw_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 32cb4e6..965d381 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -22,7 +22,6 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 3df9a36..dde3555 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -32,7 +32,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/hardirq.h>
 #include <linux/sched.h>
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 609e016..71a5b52 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -1,6 +1,6 @@
 #include <linux/file.h>
 #include <linux/fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 524d971..5a8f50a9 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -87,10 +87,6 @@
 config MPC10X_OPENPIC
 	bool
 
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
 config GAMECUBE_COMMON
 	bool
 
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 487bda0..2e9bcf6 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -26,6 +26,7 @@
 #include <linux/tty.h>
 #include <linux/serial_core.h>
 #include <linux/of_platform.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 1cb907c..f8f33e1 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/kdev_t.h>
 #include <linux/console.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/seq_file.h>
diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c
index f0475f0..f62a0c5 100644
--- a/arch/powerpc/platforms/iseries/hvlpconfig.c
+++ b/arch/powerpc/platforms/iseries/hvlpconfig.c
@@ -16,7 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/iseries/hv_lp_config.h>
 #include "it_lp_naca.h"
 
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index d8b7633..2f3d911 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -28,7 +28,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include <asm/iommu.h>
diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c
index 2430848..997e234 100644
--- a/arch/powerpc/platforms/iseries/ksyms.c
+++ b/arch/powerpc/platforms/iseries/ksyms.c
@@ -6,7 +6,7 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/hw_irq.h>
 #include <asm/iseries/hv_call_sc.h>
diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c
index 98bd2d3..00e0ec8 100644
--- a/arch/powerpc/platforms/iseries/lpardata.c
+++ b/arch/powerpc/platforms/iseries/lpardata.c
@@ -8,7 +8,6 @@
  */
 #include <linux/types.h>
 #include <linux/threads.h>
-#include <linux/module.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c
index b0f8a85..202e227 100644
--- a/arch/powerpc/platforms/iseries/lpevents.c
+++ b/arch/powerpc/platforms/iseries/lpevents.c
@@ -13,7 +13,7 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/system.h>
 #include <asm/paca.h>
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 62dabe3..254c1fc 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/proc_fs.h>
 #include <linux/dma-mapping.h>
 #include <linux/bcd.h>
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index ab3962b..c754128 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -29,7 +29,6 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/of.h>
 #include <linux/ratelimit.h>
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index c25a081..ea0acbd 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/param.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/seq_file.h>
 #include <linux/kdev_t.h>
 #include <linux/kexec.h>
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 8bda9be..7e2a551 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -15,7 +15,6 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index b6db7ce..04be62d 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/firmware.h>
 #include <asm/vio.h>
diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c
index 2376069..40dad08 100644
--- a/arch/powerpc/platforms/iseries/viopath.c
+++ b/arch/powerpc/platforms/iseries/viopath.c
@@ -27,7 +27,7 @@
  * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 5b3388b..4c37204 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index c16537b..95d0017 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -27,6 +27,7 @@
 
 #include <linux/cpufreq.h>
 #include <linux/timer.h>
+#include <linux/module.h>
 
 #include <asm/hw_irq.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index 756123b..f3defd8 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -19,10 +19,11 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/sched.h>
 
 #include <asm/pasemi_dma.h>
 
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 7c858e6..6f35582 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/console.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <linux/gfp.h>
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index c2f3e86..a00096b 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -13,6 +13,7 @@
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/atomic.h>
+#include <linux/export.h>
 #include <asm/prom.h>
 #include <asm/backlight.h>
 
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index df42399..63d82bb 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -27,6 +27,7 @@
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/ioport.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <asm/sections.h>
 #include <asm/errno.h>
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index e9c8a60..996c5ff 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -33,7 +33,7 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 695443b..54d2271 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -8,7 +8,7 @@
  *
  *  Todo: - add support for the OF persistent properties
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 7667db4..901bfbd 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -24,7 +24,6 @@
 #include <linux/syscore_ops.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
-#include <linux/module.h>
 
 #include <asm/sections.h>
 #include <asm/io.h>
@@ -273,7 +272,6 @@
 
 static struct irqaction gatwick_cascade_action = {
 	.handler	= gatwick_action,
-	.flags		= IRQF_DISABLED,
 	.name		= "cascade",
 };
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index a028f08..96580b1 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -31,6 +31,7 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
+#include <linux/export.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9a521dc..9b6a820 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@
 
 	if (psurge_secondary_virq)
 		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
-			IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+			IRQF_PERCPU, "IPI", NULL);
 
 	if (rc)
 		pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,7 +408,7 @@
 
 static struct irqaction psurge_irqaction = {
 	.handler = psurge_ipi_intr,
-	.flags = IRQF_DISABLED|IRQF_PERCPU,
+	.flags = IRQF_PERCPU,
 	.name = "primary IPI",
 };
 
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
new file mode 100644
index 0000000..74fea5c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -0,0 +1,16 @@
+config PPC_POWERNV
+	depends on PPC64 && PPC_BOOK3S
+	bool "IBM PowerNV (Non-Virtualized) platform support"
+	select PPC_NATIVE
+	select PPC_XICS
+	select PPC_ICP_NATIVE
+	select PPC_P7_NAP
+	select PPC_PCI_CHOICE if EMBEDDED
+	default y
+
+config PPC_POWERNV_RTAS
+	depends on PPC_POWERNV
+	bool "Support for RTAS based PowerNV platforms such as BML"
+	default y
+	select PPC_ICS_RTAS
+	select PPC_RTAS
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
new file mode 100644
index 0000000..3185300
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -0,0 +1,5 @@
+obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
+obj-y			+= opal-rtc.o opal-nvram.o
+
+obj-$(CONFIG_SMP)	+= smp.o
+obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o
diff --git a/arch/powerpc/platforms/powernv/opal-nvram.c b/arch/powerpc/platforms/powernv/opal-nvram.c
new file mode 100644
index 0000000..3f83e1a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-nvram.c
@@ -0,0 +1,88 @@
+/*
+ * PowerNV nvram code.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+
+#include <asm/opal.h>
+#include <asm/machdep.h>
+
+static unsigned int nvram_size;
+
+static ssize_t opal_nvram_size(void)
+{
+	return nvram_size;
+}
+
+static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index)
+{
+	s64 rc;
+	int off;
+
+	if (*index >= nvram_size)
+		return 0;
+	off = *index;
+	if ((off + count) > nvram_size)
+		count = nvram_size - off;
+	rc = opal_read_nvram(__pa(buf), count, off);
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+	*index += count;
+	return count;
+}
+
+static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
+{
+	s64 rc = OPAL_BUSY;
+	int off;
+
+	if (*index >= nvram_size)
+		return 0;
+	off = *index;
+	if ((off + count) > nvram_size)
+		count = nvram_size - off;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_write_nvram(__pa(buf), count, off);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+	}
+	*index += count;
+	return count;
+}
+
+void __init opal_nvram_init(void)
+{
+	struct device_node *np;
+	const u32 *nbytes_p;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,opal-nvram");
+	if (np == NULL)
+		return;
+
+	nbytes_p = of_get_property(np, "#bytes", NULL);
+	if (!nbytes_p) {
+		of_node_put(np);
+		return;
+	}
+	nvram_size = *nbytes_p;
+
+	printk(KERN_INFO "OPAL nvram setup, %u bytes\n", nvram_size);
+	of_node_put(np);
+
+	ppc_md.nvram_read = opal_nvram_read;
+	ppc_md.nvram_write = opal_nvram_write;
+	ppc_md.nvram_size = opal_nvram_size;
+}
+
diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c
new file mode 100644
index 0000000..2aa7641
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-rtc.c
@@ -0,0 +1,97 @@
+/*
+ * PowerNV Real Time Clock.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
+{
+	tm->tm_year	= ((bcd2bin(y_m_d >> 24) * 100) +
+			   bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
+	tm->tm_mon	= bcd2bin((y_m_d >> 8) & 0xff) - 1;
+	tm->tm_mday	= bcd2bin(y_m_d & 0xff);
+	tm->tm_hour	= bcd2bin((h_m_s_ms >> 56) & 0xff);
+	tm->tm_min	= bcd2bin((h_m_s_ms >> 48) & 0xff);
+	tm->tm_sec	= bcd2bin((h_m_s_ms >> 40) & 0xff);
+
+        GregorianDay(tm);
+}
+
+unsigned long __init opal_get_boot_time(void)
+{
+	struct rtc_time tm;
+	u32 y_m_d;
+	u64 h_m_s_ms;
+	long rc = OPAL_BUSY;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	if (rc != OPAL_SUCCESS)
+		return 0;
+	opal_to_tm(y_m_d, h_m_s_ms, &tm);
+	return mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+void opal_get_rtc_time(struct rtc_time *tm)
+{
+	long rc = OPAL_BUSY;
+	u32 y_m_d;
+	u64 h_m_s_ms;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_rtc_read(&y_m_d, &h_m_s_ms);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	if (rc != OPAL_SUCCESS)
+		return;
+	opal_to_tm(y_m_d, h_m_s_ms, tm);
+}
+
+int opal_set_rtc_time(struct rtc_time *tm)
+{
+	long rc = OPAL_BUSY;
+	u32 y_m_d = 0;
+	u64 h_m_s_ms = 0;
+
+	y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
+	y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
+	y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
+	y_m_d |= ((u32)bin2bcd(tm->tm_mday));
+
+	h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
+	h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
+	h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_rtc_write(y_m_d, h_m_s_ms);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	return rc == OPAL_SUCCESS ? 0 : -EIO;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
new file mode 100644
index 0000000..77b48b2
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -0,0 +1,140 @@
+/*
+ * PowerNV OPAL takeover assembly code, for use by prom_init.c
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/hvcall.h>
+#include <asm/asm-offsets.h>
+#include <asm/opal.h>
+
+#define STK_PARAM(i)	(48 + ((i)-3)*8)
+
+#define H_HAL_TAKEOVER			0x5124
+#define H_HAL_TAKEOVER_QUERY_MAGIC	-1
+
+	.text
+_GLOBAL(opal_query_takeover)
+	mfcr	r0
+	stw	r0,8(r1)
+	std	r3,STK_PARAM(r3)(r1)
+	std	r4,STK_PARAM(r4)(r1)
+	li	r3,H_HAL_TAKEOVER
+	li	r4,H_HAL_TAKEOVER_QUERY_MAGIC
+	HVSC
+	ld	r10,STK_PARAM(r3)(r1)
+	std	r4,0(r10)
+	ld	r10,STK_PARAM(r4)(r1)
+	std	r5,0(r10)
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+	blr
+
+_GLOBAL(opal_do_takeover)
+	mfcr	r0
+	stw	r0,8(r1)
+	mflr	r0
+	std	r0,16(r1)
+	bl	__opal_do_takeover
+	ld	r0,16(r1)
+	mtlr	r0
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+	blr
+
+__opal_do_takeover:
+	ld	r4,0(r3)
+	ld	r5,0x8(r3)
+	ld	r6,0x10(r3)
+	ld	r7,0x18(r3)
+	ld	r8,0x20(r3)
+	ld	r9,0x28(r3)
+	ld	r10,0x30(r3)
+	ld	r11,0x38(r3)
+	li	r3,H_HAL_TAKEOVER
+	HVSC
+	blr
+
+	.globl opal_secondary_entry
+opal_secondary_entry:
+	mr	r31,r3
+	mfmsr	r11
+	li	r12,(MSR_SF | MSR_ISF)@highest
+	sldi	r12,r12,48
+	or	r11,r11,r12
+	mtmsrd	r11
+	isync
+	mfspr	r4,SPRN_PIR
+	std	r4,0(r3)
+1:	HMT_LOW
+	ld	r4,8(r3)
+	cmpli	cr0,r4,0
+	beq	1b
+	HMT_MEDIUM
+1:	addi	r3,r31,16
+	bl	__opal_do_takeover
+	b	1b
+
+_GLOBAL(opal_enter_rtas)
+	mflr	r0
+	std	r0,16(r1)
+        stdu	r1,-PROM_FRAME_SIZE(r1)	/* Save SP and create stack space */
+
+	/* Because PROM is running in 32b mode, it clobbers the high order half
+	 * of all registers that it saves.  We therefore save those registers
+	 * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
+	*/
+	SAVE_GPR(2, r1)
+	SAVE_GPR(13, r1)
+	SAVE_8GPRS(14, r1)
+	SAVE_10GPRS(22, r1)
+	mfcr	r10
+	mfmsr	r11
+	std	r10,_CCR(r1)
+	std	r11,_MSR(r1)
+
+	/* Get the PROM entrypoint */
+	mtlr	r5
+
+	/* Switch MSR to 32 bits mode
+	 */
+        li      r12,1
+        rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
+        andc    r11,r11,r12
+        li      r12,1
+        rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
+        andc    r11,r11,r12
+        mtmsrd  r11
+        isync
+
+	/* Enter RTAS here... */
+	blrl
+
+	/* Just make sure that r1 top 32 bits didn't get
+	 * corrupt by OF
+	 */
+	rldicl	r1,r1,0,32
+
+	/* Restore the MSR (back to 64 bits) */
+	ld	r0,_MSR(r1)
+	MTMSRD(r0)
+        isync
+
+	/* Restore other registers */
+	REST_GPR(2, r1)
+	REST_GPR(13, r1)
+	REST_8GPRS(14, r1)
+	REST_10GPRS(22, r1)
+	ld	r4,_CCR(r1)
+	mtcr	r4
+
+        addi	r1,r1,PROM_FRAME_SIZE
+	ld	r0,16(r1)
+	mtlr    r0
+	blr
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
new file mode 100644
index 0000000..4a3f46d
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -0,0 +1,101 @@
+/*
+ * PowerNV OPAL API wrappers
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/hvcall.h>
+#include <asm/asm-offsets.h>
+#include <asm/opal.h>
+
+/* TODO:
+ *
+ * - Trace irqs in/off (needs saving/restoring all args, argh...)
+ * - Get r11 feed up by Dave so I can have better register usage
+ */
+#define OPAL_CALL(name, token)		\
+ _GLOBAL(name);				\
+	mflr	r0;			\
+	mfcr	r12;			\
+	std	r0,16(r1);		\
+	std	r12,8(r1);		\
+	std	r1,PACAR1(r13);		\
+	li	r0,0;			\
+	mfmsr	r12;			\
+	ori	r0,r0,MSR_EE;		\
+	std	r12,PACASAVEDMSR(r13);	\
+	andc	r12,r12,r0;		\
+	mtmsrd	r12,1;			\
+	LOAD_REG_ADDR(r0,.opal_return);	\
+	mtlr	r0;			\
+	li	r0,MSR_DR|MSR_IR;	\
+	andc	r12,r12,r0;		\
+	li	r0,token;		\
+	mtspr	SPRN_HSRR1,r12;		\
+	LOAD_REG_ADDR(r11,opal);	\
+	ld	r12,8(r11);		\
+	ld	r2,0(r11);		\
+	mtspr	SPRN_HSRR0,r12;		\
+	hrfid
+
+_STATIC(opal_return)
+	ld	r2,PACATOC(r13);
+	ld	r4,8(r1);
+	ld	r5,16(r1);
+	ld	r6,PACASAVEDMSR(r13);
+	mtspr	SPRN_SRR0,r5;
+	mtspr	SPRN_SRR1,r6;
+	mtcr	r4;
+	rfid
+
+OPAL_CALL(opal_console_write,			OPAL_CONSOLE_WRITE);
+OPAL_CALL(opal_console_read,			OPAL_CONSOLE_READ);
+OPAL_CALL(opal_console_write_buffer_space,	OPAL_CONSOLE_WRITE_BUFFER_SPACE);
+OPAL_CALL(opal_rtc_read,			OPAL_RTC_READ);
+OPAL_CALL(opal_rtc_write,			OPAL_RTC_WRITE);
+OPAL_CALL(opal_cec_power_down,			OPAL_CEC_POWER_DOWN);
+OPAL_CALL(opal_cec_reboot,			OPAL_CEC_REBOOT);
+OPAL_CALL(opal_read_nvram,			OPAL_READ_NVRAM);
+OPAL_CALL(opal_write_nvram,			OPAL_WRITE_NVRAM);
+OPAL_CALL(opal_handle_interrupt,		OPAL_HANDLE_INTERRUPT);
+OPAL_CALL(opal_poll_events,			OPAL_POLL_EVENTS);
+OPAL_CALL(opal_pci_set_hub_tce_memory,		OPAL_PCI_SET_HUB_TCE_MEMORY);
+OPAL_CALL(opal_pci_set_phb_tce_memory,		OPAL_PCI_SET_PHB_TCE_MEMORY);
+OPAL_CALL(opal_pci_config_read_byte,		OPAL_PCI_CONFIG_READ_BYTE);
+OPAL_CALL(opal_pci_config_read_half_word,	OPAL_PCI_CONFIG_READ_HALF_WORD);
+OPAL_CALL(opal_pci_config_read_word,		OPAL_PCI_CONFIG_READ_WORD);
+OPAL_CALL(opal_pci_config_write_byte,		OPAL_PCI_CONFIG_WRITE_BYTE);
+OPAL_CALL(opal_pci_config_write_half_word,	OPAL_PCI_CONFIG_WRITE_HALF_WORD);
+OPAL_CALL(opal_pci_config_write_word,		OPAL_PCI_CONFIG_WRITE_WORD);
+OPAL_CALL(opal_set_xive,			OPAL_SET_XIVE);
+OPAL_CALL(opal_get_xive,			OPAL_GET_XIVE);
+OPAL_CALL(opal_register_exception_handler,	OPAL_REGISTER_OPAL_EXCEPTION_HANDLER);
+OPAL_CALL(opal_pci_eeh_freeze_status,		OPAL_PCI_EEH_FREEZE_STATUS);
+OPAL_CALL(opal_pci_eeh_freeze_clear,		OPAL_PCI_EEH_FREEZE_CLEAR);
+OPAL_CALL(opal_pci_shpc,			OPAL_PCI_SHPC);
+OPAL_CALL(opal_pci_phb_mmio_enable,		OPAL_PCI_PHB_MMIO_ENABLE);
+OPAL_CALL(opal_pci_set_phb_mem_window,		OPAL_PCI_SET_PHB_MEM_WINDOW);
+OPAL_CALL(opal_pci_map_pe_mmio_window,		OPAL_PCI_MAP_PE_MMIO_WINDOW);
+OPAL_CALL(opal_pci_set_phb_table_memory,	OPAL_PCI_SET_PHB_TABLE_MEMORY);
+OPAL_CALL(opal_pci_set_pe,			OPAL_PCI_SET_PE);
+OPAL_CALL(opal_pci_set_peltv,			OPAL_PCI_SET_PELTV);
+OPAL_CALL(opal_pci_set_mve,			OPAL_PCI_SET_MVE);
+OPAL_CALL(opal_pci_set_mve_enable,		OPAL_PCI_SET_MVE_ENABLE);
+OPAL_CALL(opal_pci_get_xive_reissue,		OPAL_PCI_GET_XIVE_REISSUE);
+OPAL_CALL(opal_pci_set_xive_reissue,		OPAL_PCI_SET_XIVE_REISSUE);
+OPAL_CALL(opal_pci_set_xive_pe,			OPAL_PCI_SET_XIVE_PE);
+OPAL_CALL(opal_get_xive_source,			OPAL_GET_XIVE_SOURCE);
+OPAL_CALL(opal_get_msi_32,			OPAL_GET_MSI_32);
+OPAL_CALL(opal_get_msi_64,			OPAL_GET_MSI_64);
+OPAL_CALL(opal_start_cpu,			OPAL_START_CPU);
+OPAL_CALL(opal_query_cpu_status,		OPAL_QUERY_CPU_STATUS);
+OPAL_CALL(opal_write_oppanel,			OPAL_WRITE_OPPANEL);
+OPAL_CALL(opal_pci_map_pe_dma_window,		OPAL_PCI_MAP_PE_DMA_WINDOW);
+OPAL_CALL(opal_pci_map_pe_dma_window_real,	OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
+OPAL_CALL(opal_pci_reset,			OPAL_PCI_RESET);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
new file mode 100644
index 0000000..aaa0dba
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -0,0 +1,322 @@
+/*
+ * PowerNV OPAL high level interfaces
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+#include "powernv.h"
+
+struct opal {
+	u64 base;
+	u64 entry;
+} opal;
+
+static struct device_node *opal_node;
+static DEFINE_SPINLOCK(opal_write_lock);
+extern u64 opal_mc_secondary_handler[];
+
+int __init early_init_dt_scan_opal(unsigned long node,
+				   const char *uname, int depth, void *data)
+{
+	const void *basep, *entryp;
+	unsigned long basesz, entrysz;
+	u64 glue;
+
+	if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
+		return 0;
+
+	basep  = of_get_flat_dt_prop(node, "opal-base-address", &basesz);
+	entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz);
+
+	if (!basep || !entryp)
+		return 1;
+
+	opal.base = of_read_number(basep, basesz/4);
+	opal.entry = of_read_number(entryp, entrysz/4);
+
+	pr_debug("OPAL Base  = 0x%llx (basep=%p basesz=%ld)\n",
+		 opal.base, basep, basesz);
+	pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n",
+		 opal.entry, entryp, entrysz);
+
+	powerpc_firmware_features |= FW_FEATURE_OPAL;
+	if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) {
+		powerpc_firmware_features |= FW_FEATURE_OPALv2;
+		printk("OPAL V2 detected !\n");
+	} else {
+		printk("OPAL V1 detected !\n");
+	}
+
+	/* Hookup some exception handlers. We use the fwnmi area at 0x7000
+	 * to provide the glue space to OPAL
+	 */
+	glue = 0x7000;
+	opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER,
+					__pa(opal_mc_secondary_handler[0]),
+					glue);
+	glue += 128;
+	opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
+					0, glue);
+	glue += 128;
+	opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
+
+	return 1;
+}
+
+int opal_get_chars(uint32_t vtermno, char *buf, int count)
+{
+	s64 len, rc;
+	u64 evt;
+
+	if (!opal.entry)
+		return -ENODEV;
+	opal_poll_events(&evt);
+	if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0)
+		return 0;
+	len = count;
+	rc = opal_console_read(vtermno, &len, buf);
+	if (rc == OPAL_SUCCESS)
+		return len;
+	return 0;
+}
+
+int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
+{
+	int written = 0;
+	s64 len, rc;
+	unsigned long flags;
+	u64 evt;
+
+	if (!opal.entry)
+		return -ENODEV;
+
+	/* We want put_chars to be atomic to avoid mangling of hvsi
+	 * packets. To do that, we first test for room and return
+	 * -EAGAIN if there isn't enough.
+	 *
+	 * Unfortunately, opal_console_write_buffer_space() doesn't
+	 * appear to work on opal v1, so we just assume there is
+	 * enough room and be done with it
+	 */
+	spin_lock_irqsave(&opal_write_lock, flags);
+	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+		rc = opal_console_write_buffer_space(vtermno, &len);
+		if (rc || len < total_len) {
+			spin_unlock_irqrestore(&opal_write_lock, flags);
+			/* Closed -> drop characters */
+			if (rc)
+				return total_len;
+			opal_poll_events(&evt);
+			return -EAGAIN;
+		}
+	}
+
+	/* We still try to handle partial completions, though they
+	 * should no longer happen.
+	 */
+	rc = OPAL_BUSY;
+	while(total_len > 0 && (rc == OPAL_BUSY ||
+				rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) {
+		len = total_len;
+		rc = opal_console_write(vtermno, &len, data);
+		if (rc == OPAL_SUCCESS) {
+			total_len -= len;
+			data += len;
+			written += len;
+		}
+		/* This is a bit nasty but we need that for the console to
+		 * flush when there aren't any interrupts. We will clean
+		 * things a bit later to limit that to synchronous path
+		 * such as the kernel console and xmon/udbg
+		 */
+		do
+			opal_poll_events(&evt);
+		while(rc == OPAL_SUCCESS && (evt & OPAL_EVENT_CONSOLE_OUTPUT));
+	}
+	spin_unlock_irqrestore(&opal_write_lock, flags);
+	return written;
+}
+
+int opal_machine_check(struct pt_regs *regs)
+{
+	struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt;
+	struct opal_machine_check_event evt;
+	const char *level, *sevstr, *subtype;
+	static const char *opal_mc_ue_types[] = {
+		"Indeterminate",
+		"Instruction fetch",
+		"Page table walk ifetch",
+		"Load/Store",
+		"Page table walk Load/Store",
+	};
+	static const char *opal_mc_slb_types[] = {
+		"Indeterminate",
+		"Parity",
+		"Multihit",
+	};
+	static const char *opal_mc_erat_types[] = {
+		"Indeterminate",
+		"Parity",
+		"Multihit",
+	};
+	static const char *opal_mc_tlb_types[] = {
+		"Indeterminate",
+		"Parity",
+		"Multihit",
+	};
+
+	/* Copy the event structure and release the original */
+	evt = *opal_evt;
+	opal_evt->in_use = 0;
+
+	/* Print things out */
+	if (evt.version != OpalMCE_V1) {
+		pr_err("Machine Check Exception, Unknown event version %d !\n",
+		       evt.version);
+		return 0;
+	}
+	switch(evt.severity) {
+	case OpalMCE_SEV_NO_ERROR:
+		level = KERN_INFO;
+		sevstr = "Harmless";
+		break;
+	case OpalMCE_SEV_WARNING:
+		level = KERN_WARNING;
+		sevstr = "";
+		break;
+	case OpalMCE_SEV_ERROR_SYNC:
+		level = KERN_ERR;
+		sevstr = "Severe";
+		break;
+	case OpalMCE_SEV_FATAL:
+	default:
+		level = KERN_ERR;
+		sevstr = "Fatal";
+		break;
+	}
+
+	printk("%s%s Machine check interrupt [%s]\n", level, sevstr,
+	       evt.disposition == OpalMCE_DISPOSITION_RECOVERED ?
+	       "Recovered" : "[Not recovered");
+	printk("%s  Initiator: %s\n", level,
+	       evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown");
+	switch(evt.error_type) {
+	case OpalMCE_ERROR_TYPE_UE:
+		subtype = evt.u.ue_error.ue_error_type <
+			ARRAY_SIZE(opal_mc_ue_types) ?
+			opal_mc_ue_types[evt.u.ue_error.ue_error_type]
+			: "Unknown";
+		printk("%s  Error type: UE [%s]\n", level, subtype);
+		if (evt.u.ue_error.effective_address_provided)
+			printk("%s    Effective address: %016llx\n",
+			       level, evt.u.ue_error.effective_address);
+		if (evt.u.ue_error.physical_address_provided)
+			printk("%s      Physial address: %016llx\n",
+			       level, evt.u.ue_error.physical_address);
+		break;
+	case OpalMCE_ERROR_TYPE_SLB:
+		subtype = evt.u.slb_error.slb_error_type <
+			ARRAY_SIZE(opal_mc_slb_types) ?
+			opal_mc_slb_types[evt.u.slb_error.slb_error_type]
+			: "Unknown";
+		printk("%s  Error type: SLB [%s]\n", level, subtype);
+		if (evt.u.slb_error.effective_address_provided)
+			printk("%s    Effective address: %016llx\n",
+			       level, evt.u.slb_error.effective_address);
+		break;
+	case OpalMCE_ERROR_TYPE_ERAT:
+		subtype = evt.u.erat_error.erat_error_type <
+			ARRAY_SIZE(opal_mc_erat_types) ?
+			opal_mc_erat_types[evt.u.erat_error.erat_error_type]
+			: "Unknown";
+		printk("%s  Error type: ERAT [%s]\n", level, subtype);
+		if (evt.u.erat_error.effective_address_provided)
+			printk("%s    Effective address: %016llx\n",
+			       level, evt.u.erat_error.effective_address);
+		break;
+	case OpalMCE_ERROR_TYPE_TLB:
+		subtype = evt.u.tlb_error.tlb_error_type <
+			ARRAY_SIZE(opal_mc_tlb_types) ?
+			opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type]
+			: "Unknown";
+		printk("%s  Error type: TLB [%s]\n", level, subtype);
+		if (evt.u.tlb_error.effective_address_provided)
+			printk("%s    Effective address: %016llx\n",
+			       level, evt.u.tlb_error.effective_address);
+		break;
+	default:
+	case OpalMCE_ERROR_TYPE_UNKNOWN:
+		printk("%s  Error type: Unknown\n", level);
+		break;
+	}
+	return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1;
+}
+
+static irqreturn_t opal_interrupt(int irq, void *data)
+{
+	uint64_t events;
+
+	opal_handle_interrupt(virq_to_hw(irq), &events);
+
+	/* XXX TODO: Do something with the events */
+
+	return IRQ_HANDLED;
+}
+
+static int __init opal_init(void)
+{
+	struct device_node *np, *consoles;
+	const u32 *irqs;
+	int rc, i, irqlen;
+
+	opal_node = of_find_node_by_path("/ibm,opal");
+	if (!opal_node) {
+		pr_warn("opal: Node not found\n");
+		return -ENODEV;
+	}
+	if (firmware_has_feature(FW_FEATURE_OPALv2))
+		consoles = of_find_node_by_path("/ibm,opal/consoles");
+	else
+		consoles = of_node_get(opal_node);
+
+	/* Register serial ports */
+	for_each_child_of_node(consoles, np) {
+		if (strcmp(np->name, "serial"))
+			continue;
+		of_platform_device_create(np, NULL, NULL);
+	}
+	of_node_put(consoles);
+
+	/* Find all OPAL interrupts and request them */
+	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
+	pr_debug("opal: Found %d interrupts reserved for OPAL\n",
+		 irqs ? (irqlen / 4) : 0);
+	for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) {
+		unsigned int hwirq = be32_to_cpup(irqs);
+		unsigned int irq = irq_create_mapping(NULL, hwirq);
+		if (irq == NO_IRQ) {
+			pr_warning("opal: Failed to map irq 0x%x\n", hwirq);
+			continue;
+		}
+		rc = request_irq(irq, opal_interrupt, 0, "opal", NULL);
+		if (rc)
+			pr_warning("opal: Error %d requesting irq %d"
+				   " (0x%x)\n", rc, irq, hwirq);
+	}
+	return 0;
+}
+subsys_initcall(opal_init);
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
new file mode 100644
index 0000000..4c80f7c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -0,0 +1,234 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* For now, use a fixed amount of TCE memory for each p5ioc2
+ * hub, 16M will do
+ */
+#define P5IOC2_TCE_MEMORY	0x01000000
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+				    unsigned int hwirq, unsigned int is_64,
+				    struct msi_msg *msg)
+{
+	if (WARN_ON(!is_64))
+		return -ENXIO;
+	msg->data = hwirq - phb->msi_base;
+	msg->address_hi = 0x10000000;
+	msg->address_lo = 0;
+
+	return 0;
+}
+
+static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb)
+{
+	unsigned int bmap_size;
+	const __be32 *prop = of_get_property(phb->hose->dn,
+					     "ibm,opal-msi-ranges", NULL);
+	if (!prop)
+		return;
+
+	/* Don't do MSI's on p5ioc2 PCI-X are they are not properly
+	 * verified in HW
+	 */
+	if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix"))
+		return;
+	phb->msi_base = be32_to_cpup(prop);
+	phb->msi_count = be32_to_cpup(prop + 1);
+	bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+	phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+	if (!phb->msi_map) {
+		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+		       phb->hose->global_number);
+		return;
+	}
+	phb->msi_setup = pnv_pci_p5ioc2_msi_setup;
+	phb->msi32_support = 0;
+	pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+		phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+static void __devinit pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
+						   struct pci_dev *pdev)
+{
+	if (phb->p5ioc2.iommu_table.it_map == NULL)
+		iommu_init_table(&phb->p5ioc2.iommu_table, phb->hose->node);
+
+	set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table);
+}
+
+static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
+					   void *tce_mem, u64 tce_size)
+{
+	struct pnv_phb *phb;
+	const u64 *prop64;
+	u64 phb_id;
+	int64_t rc;
+	static int primary = 1;
+
+	pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+	if (!prop64) {
+		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
+		return;
+	}
+	phb_id = be64_to_cpup(prop64);
+	pr_devel("  PHB-ID  : 0x%016llx\n", phb_id);
+	pr_devel("  TCE AT  : 0x%016lx\n", __pa(tce_mem));
+	pr_devel("  TCE SZ  : 0x%016llx\n", tce_size);
+
+	rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("  Failed to set TCE memory, OPAL error %lld\n", rc);
+		return;
+	}
+
+	phb = alloc_bootmem(sizeof(struct pnv_phb));
+	if (phb) {
+		memset(phb, 0, sizeof(struct pnv_phb));
+		phb->hose = pcibios_alloc_controller(np);
+	}
+	if (!phb || !phb->hose) {
+		pr_err("  Failed to allocate PCI controller\n");
+		return;
+	}
+
+	spin_lock_init(&phb->lock);
+	phb->hose->first_busno = 0;
+	phb->hose->last_busno = 0xff;
+	phb->hose->private_data = phb;
+	phb->opal_id = phb_id;
+	phb->type = PNV_PHB_P5IOC2;
+
+	phb->regs = of_iomap(np, 0);
+
+	if (phb->regs == NULL)
+		pr_err("  Failed to map registers !\n");
+	else {
+		pr_devel("  P_BUID     = 0x%08x\n", in_be32(phb->regs + 0x100));
+		pr_devel("  P_IOSZ     = 0x%08x\n", in_be32(phb->regs + 0x1b0));
+		pr_devel("  P_IO_ST    = 0x%08x\n", in_be32(phb->regs + 0x1e0));
+		pr_devel("  P_MEM1_H   = 0x%08x\n", in_be32(phb->regs + 0x1a0));
+		pr_devel("  P_MEM1_L   = 0x%08x\n", in_be32(phb->regs + 0x190));
+		pr_devel("  P_MSZ1_L   = 0x%08x\n", in_be32(phb->regs + 0x1c0));
+		pr_devel("  P_MEM_ST   = 0x%08x\n", in_be32(phb->regs + 0x1d0));
+		pr_devel("  P_MEM2_H   = 0x%08x\n", in_be32(phb->regs + 0x2c0));
+		pr_devel("  P_MEM2_L   = 0x%08x\n", in_be32(phb->regs + 0x2b0));
+		pr_devel("  P_MSZ2_H   = 0x%08x\n", in_be32(phb->regs + 0x2d0));
+		pr_devel("  P_MSZ2_L   = 0x%08x\n", in_be32(phb->regs + 0x2e0));
+	}
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(phb->hose, np, primary);
+	primary = 0;
+
+	phb->hose->ops = &pnv_pci_ops;
+
+	/* Setup MSI support */
+	pnv_pci_init_p5ioc2_msis(phb);
+
+	/* Setup TCEs */
+	phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
+	pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
+				  tce_mem, tce_size, 0);
+}
+
+void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
+{
+	struct device_node *phbn;
+	const u64 *prop64;
+	u64 hub_id;
+	void *tce_mem;
+	uint64_t tce_per_phb;
+	int64_t rc;
+	int phb_count = 0;
+
+	pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+	if (!prop64) {
+		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+		return;
+	}
+	hub_id = be64_to_cpup(prop64);
+	pr_info(" HUB-ID : 0x%016llx\n", hub_id);
+
+	/* Currently allocate 16M of TCE memory for every Hub
+	 *
+	 * XXX TODO: Make it chip local if possible
+	 */
+	tce_mem = __alloc_bootmem(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY,
+				  __pa(MAX_DMA_ADDRESS));
+	if (!tce_mem) {
+		pr_err(" Failed to allocate TCE Memory !\n");
+		return;
+	}
+	pr_debug(" TCE    : 0x%016lx..0x%016lx\n",
+		__pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1);
+	rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem),
+					P5IOC2_TCE_MEMORY);
+	if (rc != OPAL_SUCCESS) {
+		pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc);
+		return;
+	}
+
+	/* Count child PHBs */
+	for_each_child_of_node(np, phbn) {
+		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex"))
+			phb_count++;
+	}
+
+	/* Calculate how much TCE space we can give per PHB */
+	tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count);
+	pr_info(" Allocating %lld MB of TCE memory per PHB\n",
+		tce_per_phb >> 20);
+
+	/* Initialize PHBs */
+	for_each_child_of_node(np, phbn) {
+		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
+		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) {
+			pnv_pci_init_p5ioc2_phb(phbn, tce_mem, tce_per_phb);
+			tce_mem += tce_per_phb;
+		}
+	}
+}
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
new file mode 100644
index 0000000..85bb66d
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -0,0 +1,427 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Currently supports only P5IOC2
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* Delay in usec */
+#define PCI_RESET_DELAY_US	3000000
+
+#define cfg_dbg(fmt...)	do { } while(0)
+//#define cfg_dbg(fmt...)	printk(fmt)
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+
+	return (phb && phb->msi_map) ? 0 : -ENODEV;
+}
+
+static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
+{
+	unsigned int id;
+
+	spin_lock(&phb->lock);
+	id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
+	if (id >= phb->msi_count && phb->msi_next)
+		id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
+	if (id >= phb->msi_count) {
+		spin_unlock(&phb->lock);
+		return 0;
+	}
+	__set_bit(id, phb->msi_map);
+	spin_unlock(&phb->lock);
+	return id + phb->msi_base;
+}
+
+static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
+{
+	unsigned int id;
+
+	if (WARN_ON(hwirq < phb->msi_base ||
+		    hwirq >= (phb->msi_base + phb->msi_count)))
+		return;
+	id = hwirq - phb->msi_base;
+	spin_lock(&phb->lock);
+	__clear_bit(id, phb->msi_map);
+	spin_unlock(&phb->lock);
+}
+
+static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	unsigned int hwirq, virq;
+	int rc;
+
+	if (WARN_ON(!phb))
+		return -ENODEV;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
+			pr_warn("%s: Supports only 64-bit MSIs\n",
+				pci_name(pdev));
+			return -ENXIO;
+		}
+		hwirq = pnv_get_one_msi(phb);
+		if (!hwirq) {
+			pr_warn("%s: Failed to find a free MSI\n",
+				pci_name(pdev));
+			return -ENOSPC;
+		}
+		virq = irq_create_mapping(NULL, hwirq);
+		if (virq == NO_IRQ) {
+			pr_warn("%s: Failed to map MSI to linux irq\n",
+				pci_name(pdev));
+			pnv_put_msi(phb, hwirq);
+			return -ENOMEM;
+		}
+		rc = phb->msi_setup(phb, pdev, hwirq, entry->msi_attrib.is_64,
+				    &msg);
+		if (rc) {
+			pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
+			irq_dispose_mapping(virq);
+			pnv_put_msi(phb, hwirq);
+			return rc;
+		}
+		irq_set_msi_desc(virq, entry);
+		write_msi_msg(virq, &msg);
+	}
+	return 0;
+}
+
+static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct msi_desc *entry;
+
+	if (WARN_ON(!phb))
+		return;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+		irq_set_msi_desc(entry->irq, NULL);
+		pnv_put_msi(phb, virq_to_hw(entry->irq));
+		irq_dispose_mapping(entry->irq);
+	}
+}
+#endif /* CONFIG_PCI_MSI */
+
+static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
+				     u32 bdfn)
+{
+	s64	rc;
+	u8	fstate;
+	u16	pcierr;
+	u32	pe_no;
+
+	/* Get PE# if we support IODA */
+	pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0;
+
+	/* Read freeze status */
+	rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
+					NULL);
+	if (rc) {
+		pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
+			   " err %lld\n", phb->hose->global_number, pe_no, rc);
+		return;
+	}
+	cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
+		bdfn, pe_no, fstate);
+	if (fstate != 0) {
+		rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+					      OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+		if (rc) {
+			pr_warning("PCI %d: Failed to clear EEH freeze state"
+				   " for PE#%d, err %lld\n",
+				   phb->hose->global_number, pe_no, rc);
+		}
+	}
+}
+
+static int pnv_pci_read_config(struct pci_bus *bus,
+			       unsigned int devfn,
+			       int where, int size, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+	s64 rc;
+
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+	case 1: {
+		u8 v8;
+		rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
+		*val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
+		break;
+	}
+	case 2: {
+		u16 v16;
+		rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
+						   &v16);
+		*val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
+		break;
+	}
+	case 4: {
+		u32 v32;
+		rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
+		*val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
+		break;
+	}
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+	cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
+		bus->number, devfn, where, size, *val);
+
+	/* Check if the PHB got frozen due to an error (no response) */
+	pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pnv_pci_write_config(struct pci_bus *bus,
+				unsigned int devfn,
+				int where, int size, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
+
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
+		bus->number, devfn, where, size, val);
+	switch (size) {
+	case 1:
+		opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
+		break;
+	case 2:
+		opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
+		break;
+	case 4:
+		opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+	/* Check if the PHB got frozen due to an error (no response) */
+	pnv_pci_config_check_eeh(phb, bus, bdfn);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pnv_pci_ops = {
+	.read = pnv_pci_read_config,
+	.write = pnv_pci_write_config,
+};
+
+static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
+			 unsigned long uaddr, enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
+{
+	u64 proto_tce;
+	u64 *tcep;
+	u64 rpn;
+
+	proto_tce = TCE_PCI_READ; // Read allowed
+
+	if (direction != DMA_TO_DEVICE)
+		proto_tce |= TCE_PCI_WRITE;
+
+	tcep = ((u64 *)tbl->it_base) + index;
+
+	while (npages--) {
+		/* can't move this out since we might cross LMB boundary */
+		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+		uaddr += TCE_PAGE_SIZE;
+		tcep++;
+	}
+	return 0;
+}
+
+static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
+{
+	u64 *tcep = ((u64 *)tbl->it_base) + index;
+
+	while (npages--)
+		*(tcep++) = 0;
+}
+
+void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+			       void *tce_mem, u64 tce_size,
+			       u64 dma_offset)
+{
+	tbl->it_blocksize = 16;
+	tbl->it_base = (unsigned long)tce_mem;
+	tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
+	tbl->it_index = 0;
+	tbl->it_size = tce_size >> 3;
+	tbl->it_busno = 0;
+	tbl->it_type = TCE_PCI;
+}
+
+static struct iommu_table * __devinit
+pnv_pci_setup_bml_iommu(struct pci_controller *hose)
+{
+	struct iommu_table *tbl;
+	const __be64 *basep;
+	const __be32 *sizep;
+
+	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
+	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
+	if (basep == NULL || sizep == NULL) {
+		pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+		return NULL;
+	}
+	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
+	if (WARN_ON(!tbl))
+		return NULL;
+	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
+				  be32_to_cpup(sizep), 0);
+	iommu_init_table(tbl, hose->node);
+	return tbl;
+}
+
+static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose,
+						 struct pci_dev *pdev)
+{
+	struct device_node *np = pci_bus_to_OF_node(hose->bus);
+	struct pci_dn *pdn;
+
+	if (np == NULL)
+		return;
+	pdn = PCI_DN(np);
+	if (!pdn->iommu_table)
+		pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
+	if (!pdn->iommu_table)
+		return;
+	set_iommu_table_base(&pdev->dev, pdn->iommu_table);
+}
+
+static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+
+	/* If we have no phb structure, try to setup a fallback based on
+	 * the device-tree (RTAS PCI for example)
+	 */
+	if (phb && phb->dma_dev_setup)
+		phb->dma_dev_setup(phb, pdev);
+	else
+		pnv_pci_dma_fallback_setup(hose, pdev);
+}
+
+static int pnv_pci_probe_mode(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	const __be64 *tstamp;
+	u64 now, target;
+
+
+	/* We hijack this as a way to ensure we have waited long
+	 * enough since the reset was lifted on the PCI bus
+	 */
+	if (bus != hose->bus)
+		return PCI_PROBE_NORMAL;
+	tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
+	if (!tstamp || !*tstamp)
+		return PCI_PROBE_NORMAL;
+
+	now = mftb() / tb_ticks_per_usec;
+	target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
+		+ PCI_RESET_DELAY_US;
+
+	pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
+		 hose->global_number, target, now);
+
+	if (now < target)
+		msleep((target - now + 999) / 1000);
+
+	return PCI_PROBE_NORMAL;
+}
+
+void __init pnv_pci_init(void)
+{
+	struct device_node *np;
+
+	pci_set_flags(PCI_CAN_SKIP_ISA_ALIGN);
+
+	/* We do not want to just probe */
+	pci_probe_only = 0;
+
+	/* OPAL absent, try POPAL first then RTAS detection of PHBs */
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+#ifdef CONFIG_PPC_POWERNV_RTAS
+		init_pci_config_tokens();
+		find_and_init_phbs();
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+	} else {
+		/* OPAL is here, do our normal stuff */
+
+		/* Look for p5ioc2 IO-Hubs */
+		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+			pnv_pci_init_p5ioc2_hub(np);
+	}
+
+	/* Setup the linkage between OF nodes and PHBs */
+	pci_devs_phb_init();
+
+	/* Configure IOMMU DMA hooks */
+	ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
+	ppc_md.tce_build = pnv_tce_build;
+	ppc_md.tce_free = pnv_tce_free;
+	ppc_md.pci_probe_mode = pnv_pci_probe_mode;
+	set_pci_dma_ops(&dma_iommu_ops);
+
+	/* Configure MSIs */
+#ifdef CONFIG_PCI_MSI
+	ppc_md.msi_check_device = pnv_msi_check_device;
+	ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
+#endif
+}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
new file mode 100644
index 0000000..d4dbc49
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -0,0 +1,48 @@
+#ifndef __POWERNV_PCI_H
+#define __POWERNV_PCI_H
+
+struct pci_dn;
+
+enum pnv_phb_type {
+	PNV_PHB_P5IOC2,
+	PNV_PHB_IODA1,
+	PNV_PHB_IODA2,
+};
+
+struct pnv_phb {
+	struct pci_controller	*hose;
+	enum pnv_phb_type	type;
+	u64			opal_id;
+	void __iomem		*regs;
+	spinlock_t		lock;
+
+#ifdef CONFIG_PCI_MSI
+	unsigned long		*msi_map;
+	unsigned int		msi_base;
+	unsigned int		msi_count;
+	unsigned int		msi_next;
+	unsigned int		msi32_support;
+#endif
+	int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
+			 unsigned int hwirq, unsigned int is_64,
+			 struct msi_msg *msg);
+	void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
+	void (*fixup_phb)(struct pci_controller *hose);
+	u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
+
+	union {
+		struct {
+			struct iommu_table iommu_table;
+		} p5ioc2;
+	};
+};
+
+extern struct pci_ops pnv_pci_ops;
+
+extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+				      void *tce_mem, u64 tce_size,
+				      u64 dma_offset);
+extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+
+
+#endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
new file mode 100644
index 0000000..8a9df7f
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -0,0 +1,16 @@
+#ifndef _POWERNV_H
+#define _POWERNV_H
+
+#ifdef CONFIG_SMP
+extern void pnv_smp_init(void);
+#else
+static inline void pnv_smp_init(void) { }
+#endif
+
+#ifdef CONFIG_PCI
+extern void pnv_pci_init(void);
+#else
+static inline void pnv_pci_init(void) { }
+#endif
+
+#endif /* _POWERNV_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
new file mode 100644
index 0000000..467bd4a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -0,0 +1,196 @@
+/*
+ * PowerNV setup code.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/bug.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/xics.h>
+#include <asm/rtas.h>
+#include <asm/opal.h>
+#include <asm/xics.h>
+
+#include "powernv.h"
+
+static void __init pnv_setup_arch(void)
+{
+	/* Initialize SMP */
+	pnv_smp_init();
+
+	/* Setup PCI */
+	pnv_pci_init();
+
+	/* Setup RTC and NVRAM callbacks */
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		opal_nvram_init();
+
+	/* Enable NAP mode */
+	powersave_nap = 1;
+
+	/* XXX PMCS */
+}
+
+static void __init pnv_init_early(void)
+{
+#ifdef CONFIG_HVC_OPAL
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		hvc_opal_init_early();
+	else
+#endif
+		add_preferred_console("hvc", 0, NULL);
+}
+
+static void __init pnv_init_IRQ(void)
+{
+	xics_init();
+
+	WARN_ON(!ppc_md.get_irq);
+}
+
+static void pnv_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	const char *model = "";
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: PowerNV %s\n", model);
+	if (firmware_has_feature(FW_FEATURE_OPALv2))
+		seq_printf(m, "firmware\t: OPAL v2\n");
+	else if (firmware_has_feature(FW_FEATURE_OPAL))
+		seq_printf(m, "firmware\t: OPAL v1\n");
+	else
+		seq_printf(m, "firmware\t: BML\n");
+	of_node_put(root);
+}
+
+static void  __noreturn pnv_restart(char *cmd)
+{
+	long rc = OPAL_BUSY;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_cec_reboot();
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	for (;;)
+		opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_power_off(void)
+{
+	long rc = OPAL_BUSY;
+
+	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+		rc = opal_cec_power_down(0);
+		if (rc == OPAL_BUSY_EVENT)
+			opal_poll_events(NULL);
+		else
+			mdelay(10);
+	}
+	for (;;)
+		opal_poll_events(NULL);
+}
+
+static void __noreturn pnv_halt(void)
+{
+	pnv_power_off();
+}
+
+static void pnv_progress(char *s, unsigned short hex)
+{
+}
+
+#ifdef CONFIG_KEXEC
+static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	xics_kexec_teardown_cpu(secondary);
+}
+#endif /* CONFIG_KEXEC */
+
+static void __init pnv_setup_machdep_opal(void)
+{
+	ppc_md.get_boot_time = opal_get_boot_time;
+	ppc_md.get_rtc_time = opal_get_rtc_time;
+	ppc_md.set_rtc_time = opal_set_rtc_time;
+	ppc_md.restart = pnv_restart;
+	ppc_md.power_off = pnv_power_off;
+	ppc_md.halt = pnv_halt;
+	ppc_md.machine_check_exception = opal_machine_check;
+}
+
+#ifdef CONFIG_PPC_POWERNV_RTAS
+static void __init pnv_setup_machdep_rtas(void)
+{
+	if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+		ppc_md.get_boot_time = rtas_get_boot_time;
+		ppc_md.get_rtc_time = rtas_get_rtc_time;
+		ppc_md.set_rtc_time = rtas_set_rtc_time;
+	}
+	ppc_md.restart = rtas_restart;
+	ppc_md.power_off = rtas_power_off;
+	ppc_md.halt = rtas_halt;
+}
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+
+static int __init pnv_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,powernv"))
+		return 0;
+
+	hpte_init_native();
+
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		pnv_setup_machdep_opal();
+#ifdef CONFIG_PPC_POWERNV_RTAS
+	else if (rtas.base)
+		pnv_setup_machdep_rtas();
+#endif /* CONFIG_PPC_POWERNV_RTAS */
+
+	pr_debug("PowerNV detected !\n");
+
+	return 1;
+}
+
+define_machine(powernv) {
+	.name			= "PowerNV",
+	.probe			= pnv_probe,
+	.init_early		= pnv_init_early,
+	.setup_arch		= pnv_setup_arch,
+	.init_IRQ		= pnv_init_IRQ,
+	.show_cpuinfo		= pnv_show_cpuinfo,
+	.progress		= pnv_progress,
+	.power_save             = power7_idle,
+	.calibrate_decr		= generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+	.kexec_cpu_down		= pnv_kexec_cpu_down,
+#endif
+};
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
new file mode 100644
index 0000000..e877366
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -0,0 +1,182 @@
+/*
+ * SMP support for PowerNV machines.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/paca.h>
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/firmware.h>
+#include <asm/system.h>
+#include <asm/rtas.h>
+#include <asm/vdso_datapage.h>
+#include <asm/cputhreads.h>
+#include <asm/xics.h>
+#include <asm/opal.h>
+
+#include "powernv.h"
+
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static void __cpuinit pnv_smp_setup_cpu(int cpu)
+{
+	if (cpu != boot_cpuid)
+		xics_setup_cpu();
+}
+
+static int pnv_smp_cpu_bootable(unsigned int nr)
+{
+	/* Special case - we inhibit secondary thread startup
+	 * during boot if the user requests it.
+	 */
+	if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
+		if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
+			return 0;
+		if (smt_enabled_at_boot
+		    && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
+			return 0;
+	}
+
+	return 1;
+}
+
+int __devinit pnv_smp_kick_cpu(int nr)
+{
+	unsigned int pcpu = get_hard_smp_processor_id(nr);
+	unsigned long start_here = __pa(*((unsigned long *)
+					  generic_secondary_smp_init));
+	long rc;
+
+	BUG_ON(nr < 0 || nr >= NR_CPUS);
+
+	/* On OPAL v2 the CPU are still spinning inside OPAL itself,
+	 * get them back now
+	 */
+	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+		pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
+		rc = opal_start_cpu(pcpu, start_here);
+		if (rc != OPAL_SUCCESS)
+			pr_warn("OPAL Error %ld starting CPU %d\n",
+				rc, nr);
+	}
+	return smp_generic_kick_cpu(nr);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int pnv_smp_cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	/* This is identical to pSeries... might consolidate by
+	 * moving migrate_irqs_away to a ppc_md with default to
+	 * the generic fixup_irqs. --BenH.
+	 */
+	set_cpu_online(cpu, false);
+	vdso_data->processorCount--;
+	if (cpu == boot_cpuid)
+		boot_cpuid = cpumask_any(cpu_online_mask);
+	xics_migrate_irqs_away();
+	return 0;
+}
+
+static void pnv_smp_cpu_kill_self(void)
+{
+	unsigned int cpu;
+
+	/* If powersave_nap is enabled, use NAP mode, else just
+	 * spin aimlessly
+	 */
+	if (!powersave_nap) {
+		generic_mach_cpu_die();
+		return;
+	}
+
+	/* Standard hot unplug procedure */
+	local_irq_disable();
+	idle_task_exit();
+	current->active_mm = NULL; /* for sanity */
+	cpu = smp_processor_id();
+	DBG("CPU%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
+	smp_wmb();
+
+	/* We don't want to take decrementer interrupts while we are offline,
+	 * so clear LPCR:PECE1. We keep PECE2 enabled.
+	 */
+	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
+	while (!generic_check_cpu_restart(cpu)) {
+		power7_idle();
+		if (!generic_check_cpu_restart(cpu)) {
+			DBG("CPU%d Unexpected exit while offline !\n", cpu);
+			/* We may be getting an IPI, so we re-enable
+			 * interrupts to process it, it will be ignored
+			 * since we aren't online (hopefully)
+			 */
+			local_irq_enable();
+			local_irq_disable();
+		}
+	}
+	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
+	DBG("CPU%d coming online...\n", cpu);
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static struct smp_ops_t pnv_smp_ops = {
+	.message_pass	= smp_muxed_ipi_message_pass,
+	.cause_ipi	= NULL,	/* Filled at runtime by xics_smp_probe() */
+	.probe		= xics_smp_probe,
+	.kick_cpu	= pnv_smp_kick_cpu,
+	.setup_cpu	= pnv_smp_setup_cpu,
+	.cpu_bootable	= pnv_smp_cpu_bootable,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= pnv_smp_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif /* CONFIG_HOTPLUG_CPU */
+};
+
+/* This is called very early during platform setup_arch */
+void __init pnv_smp_init(void)
+{
+	smp_ops = &pnv_smp_ops;
+
+	/* XXX We don't yet have a proper entry point from HAL, for
+	 * now we rely on kexec-style entry from BML
+	 */
+
+#ifdef CONFIG_PPC_RTAS
+	/* Non-lpar has additional take/give timebase */
+	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
+	}
+#endif /* CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_HOTPLUG_CPU
+	ppc_md.cpu_die	= pnv_smp_cpu_kill_self;
+#endif
+}
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
index f0536c7..1547f66 100644
--- a/arch/powerpc/platforms/prep/Kconfig
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -21,12 +21,3 @@
 	  or pass the 'noresidual' option to the kernel.
 
 	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index dfe316b..476d9d9 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -148,4 +148,16 @@
 	  profiling support of the Cell processor with programs like
 	  oprofile and perfmon2, then say Y or M, otherwise say N.
 
+config PS3GELIC_UDBG
+	bool "PS3 udbg output via UDP broadcasts on Ethernet"
+	depends on PPC_PS3
+	help
+	  Enables udbg early debugging output by sending broadcast UDP
+	  via the Ethernet port (UDP port number 18194).
+
+	  This driver uses a trivial implementation and is independent
+	  from the main network driver.
+
+	  If in doubt, say N here.
+
 endmenu
diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile
index ac1bdf8..02b9e63 100644
--- a/arch/powerpc/platforms/ps3/Makefile
+++ b/arch/powerpc/platforms/ps3/Makefile
@@ -2,6 +2,7 @@
 obj-y += interrupt.o exports.o os-area.o
 obj-y += system-bus.o
 
+obj-$(CONFIG_PS3GELIC_UDBG) += gelic_udbg.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_SPU_BASE) += spu.o
 obj-y += device-init.o
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 6c4b583..3f175e8 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -825,7 +825,7 @@
 
 	spin_lock_init(&dev.lock);
 
-	res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+	res = request_irq(irq, ps3_notification_interrupt, 0,
 			  "ps3_notification", &dev);
 	if (res) {
 		pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
diff --git a/arch/powerpc/platforms/ps3/exports.c b/arch/powerpc/platforms/ps3/exports.c
index a7e8ffd..7df5b7d8 100644
--- a/arch/powerpc/platforms/ps3/exports.c
+++ b/arch/powerpc/platforms/ps3/exports.c
@@ -18,8 +18,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/module.h>
-
 #define LV1_CALL(name, in, out, num)                          \
   extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \
   EXPORT_SYMBOL(_lv1_##name);
diff --git a/arch/powerpc/platforms/ps3/gelic_udbg.c b/arch/powerpc/platforms/ps3/gelic_udbg.c
new file mode 100644
index 0000000..20b46a1
--- /dev/null
+++ b/arch/powerpc/platforms/ps3/gelic_udbg.c
@@ -0,0 +1,273 @@
+/*
+ * udbg debug output routine via GELIC UDP broadcasts
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ * Copyright (C) 2010 Hector Martin <hector@marcansoft.com>
+ * Copyright (C) 2011 Andre Heider <a.heider@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/lv1call.h>
+
+#define GELIC_BUS_ID 1
+#define GELIC_DEVICE_ID 0
+#define GELIC_DEBUG_PORT 18194
+#define GELIC_MAX_MESSAGE_SIZE 1000
+
+#define GELIC_LV1_GET_MAC_ADDRESS 1
+#define GELIC_LV1_GET_VLAN_ID 4
+#define GELIC_LV1_VLAN_TX_ETHERNET_0 2
+
+#define GELIC_DESCR_DMA_STAT_MASK 0xf0000000
+#define GELIC_DESCR_DMA_CARDOWNED 0xa0000000
+
+#define GELIC_DESCR_TX_DMA_IKE 0x00080000
+#define GELIC_DESCR_TX_DMA_NO_CHKSUM 0x00000000
+#define GELIC_DESCR_TX_DMA_FRAME_TAIL 0x00040000
+
+#define GELIC_DESCR_DMA_CMD_NO_CHKSUM (GELIC_DESCR_DMA_CARDOWNED | \
+				       GELIC_DESCR_TX_DMA_IKE | \
+				       GELIC_DESCR_TX_DMA_NO_CHKSUM)
+
+static u64 bus_addr;
+
+struct gelic_descr {
+	/* as defined by the hardware */
+	__be32 buf_addr;
+	__be32 buf_size;
+	__be32 next_descr_addr;
+	__be32 dmac_cmd_status;
+	__be32 result_size;
+	__be32 valid_size;	/* all zeroes for tx */
+	__be32 data_status;
+	__be32 data_error;	/* all zeroes for tx */
+} __attribute__((aligned(32)));
+
+struct debug_block {
+	struct gelic_descr descr;
+	u8 pkt[1520];
+} __packed;
+
+struct ethhdr {
+	u8 dest[6];
+	u8 src[6];
+	u16 type;
+} __packed;
+
+struct vlantag {
+	u16 vlan;
+	u16 subtype;
+} __packed;
+
+struct iphdr {
+	u8 ver_len;
+	u8 dscp_ecn;
+	u16 total_length;
+	u16 ident;
+	u16 frag_off_flags;
+	u8 ttl;
+	u8 proto;
+	u16 checksum;
+	u32 src;
+	u32 dest;
+} __packed;
+
+struct udphdr {
+	u16 src;
+	u16 dest;
+	u16 len;
+	u16 checksum;
+} __packed;
+
+static __iomem struct ethhdr *h_eth;
+static __iomem struct vlantag *h_vlan;
+static __iomem struct iphdr *h_ip;
+static __iomem struct udphdr *h_udp;
+
+static __iomem char *pmsg;
+static __iomem char *pmsgc;
+
+static __iomem struct debug_block dbg __attribute__((aligned(32)));
+
+static int header_size;
+
+static void map_dma_mem(int bus_id, int dev_id, void *start, size_t len,
+			u64 *real_bus_addr)
+{
+	s64 result;
+	u64 real_addr = ((u64)start) & 0x0fffffffffffffffUL;
+	u64 real_end = real_addr + len;
+	u64 map_start = real_addr & ~0xfff;
+	u64 map_end = (real_end + 0xfff) & ~0xfff;
+	u64 bus_addr = 0;
+
+	u64 flags = 0xf800000000000000UL;
+
+	result = lv1_allocate_device_dma_region(bus_id, dev_id,
+						map_end - map_start, 12, 0,
+						&bus_addr);
+	if (result)
+		lv1_panic(0);
+
+	result = lv1_map_device_dma_region(bus_id, dev_id, map_start,
+					   bus_addr, map_end - map_start,
+					   flags);
+	if (result)
+		lv1_panic(0);
+
+	*real_bus_addr = bus_addr + real_addr - map_start;
+}
+
+static int unmap_dma_mem(int bus_id, int dev_id, u64 bus_addr, size_t len)
+{
+	s64 result;
+	u64 real_bus_addr;
+
+	real_bus_addr = bus_addr & ~0xfff;
+	len += bus_addr - real_bus_addr;
+	len = (len + 0xfff) & ~0xfff;
+
+	result = lv1_unmap_device_dma_region(bus_id, dev_id, real_bus_addr,
+					     len);
+	if (result)
+		return result;
+
+	return lv1_free_device_dma_region(bus_id, dev_id, real_bus_addr);
+}
+
+static void gelic_debug_init(void)
+{
+	s64 result;
+	u64 v2;
+	u64 mac;
+	u64 vlan_id;
+
+	result = lv1_open_device(GELIC_BUS_ID, GELIC_DEVICE_ID, 0);
+	if (result)
+		lv1_panic(0);
+
+	map_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID, &dbg, sizeof(dbg),
+		    &bus_addr);
+
+	memset(&dbg, 0, sizeof(dbg));
+
+	dbg.descr.buf_addr = bus_addr + offsetof(struct debug_block, pkt);
+
+	wmb();
+
+	result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID,
+				 GELIC_LV1_GET_MAC_ADDRESS, 0, 0, 0,
+				 &mac, &v2);
+	if (result)
+		lv1_panic(0);
+
+	mac <<= 16;
+
+	h_eth = (struct ethhdr *)dbg.pkt;
+
+	memset(&h_eth->dest, 0xff, 6);
+	memcpy(&h_eth->src, &mac, 6);
+
+	header_size = sizeof(struct ethhdr);
+
+	result = lv1_net_control(GELIC_BUS_ID, GELIC_DEVICE_ID,
+				 GELIC_LV1_GET_VLAN_ID,
+				 GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
+				 &vlan_id, &v2);
+	if (!result) {
+		h_eth->type = 0x8100;
+
+		header_size += sizeof(struct vlantag);
+		h_vlan = (struct vlantag *)(h_eth + 1);
+		h_vlan->vlan = vlan_id;
+		h_vlan->subtype = 0x0800;
+		h_ip = (struct iphdr *)(h_vlan + 1);
+	} else {
+		h_eth->type = 0x0800;
+		h_ip = (struct iphdr *)(h_eth + 1);
+	}
+
+	header_size += sizeof(struct iphdr);
+	h_ip->ver_len = 0x45;
+	h_ip->ttl = 10;
+	h_ip->proto = 0x11;
+	h_ip->src = 0x00000000;
+	h_ip->dest = 0xffffffff;
+
+	header_size += sizeof(struct udphdr);
+	h_udp = (struct udphdr *)(h_ip + 1);
+	h_udp->src = GELIC_DEBUG_PORT;
+	h_udp->dest = GELIC_DEBUG_PORT;
+
+	pmsgc = pmsg = (char *)(h_udp + 1);
+}
+
+static void gelic_debug_shutdown(void)
+{
+	if (bus_addr)
+		unmap_dma_mem(GELIC_BUS_ID, GELIC_DEVICE_ID,
+			      bus_addr, sizeof(dbg));
+	lv1_close_device(GELIC_BUS_ID, GELIC_DEVICE_ID);
+}
+
+static void gelic_sendbuf(int msgsize)
+{
+	u16 *p;
+	u32 sum;
+	int i;
+
+	dbg.descr.buf_size = header_size + msgsize;
+	h_ip->total_length = msgsize + sizeof(struct udphdr) +
+			     sizeof(struct iphdr);
+	h_udp->len = msgsize + sizeof(struct udphdr);
+
+	h_ip->checksum = 0;
+	sum = 0;
+	p = (u16 *)h_ip;
+	for (i = 0; i < 5; i++)
+		sum += *p++;
+	h_ip->checksum = ~(sum + (sum >> 16));
+
+	dbg.descr.dmac_cmd_status = GELIC_DESCR_DMA_CMD_NO_CHKSUM |
+				    GELIC_DESCR_TX_DMA_FRAME_TAIL;
+	dbg.descr.result_size = 0;
+	dbg.descr.data_status = 0;
+
+	wmb();
+
+	lv1_net_start_tx_dma(GELIC_BUS_ID, GELIC_DEVICE_ID, bus_addr, 0);
+
+	while ((dbg.descr.dmac_cmd_status & GELIC_DESCR_DMA_STAT_MASK) ==
+	       GELIC_DESCR_DMA_CARDOWNED)
+		cpu_relax();
+}
+
+static void ps3gelic_udbg_putc(char ch)
+{
+	*pmsgc++ = ch;
+	if (ch == '\n' || (pmsgc-pmsg) >= GELIC_MAX_MESSAGE_SIZE) {
+		gelic_sendbuf(pmsgc-pmsg);
+		pmsgc = pmsg;
+	}
+}
+
+void __init udbg_init_ps3gelic(void)
+{
+	gelic_debug_init();
+	udbg_putc = ps3gelic_udbg_putc;
+}
+
+void udbg_shutdown_ps3gelic(void)
+{
+	udbg_putc = NULL;
+	gelic_debug_shutdown();
+}
+EXPORT_SYMBOL(udbg_shutdown_ps3gelic);
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 600ed2c..1d6f4f4 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/irq.h>
 
 #include <asm/machdep.h>
@@ -88,6 +88,7 @@
 	struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
 	u64 ppe_id;
 	u64 thread_id;
+	unsigned long ipi_mask;
 };
 
 static DEFINE_PER_CPU(struct ps3_private, ps3_private);
@@ -144,7 +145,11 @@
 static void ps3_chip_eoi(struct irq_data *d)
 {
 	const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
-	lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
+
+	/* non-IPIs are EOIed here. */
+
+	if (!test_bit(63 - d->irq, &pd->ipi_mask))
+		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
 }
 
 /**
@@ -691,6 +696,16 @@
 		cpu, virq, pd->bmp.ipi_debug_brk_mask);
 }
 
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+	struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+	set_bit(63 - virq, &pd->ipi_mask);
+
+	DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+		cpu, virq, pd->ipi_mask);
+}
+
 static unsigned int ps3_get_irq(void)
 {
 	struct ps3_private *pd = &__get_cpu_var(ps3_private);
@@ -720,6 +735,12 @@
 		BUG();
 	}
 #endif
+
+	/* IPIs are EOIed here. */
+
+	if (test_bit(63 - plug, &pd->ipi_mask))
+		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
 	return plug;
 }
 
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index c204588..72714ad 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/memory_hotplug.h>
 #include <linux/memblock.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 5b759b6..56d26bc 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -23,6 +23,7 @@
 #include <linux/workqueue.h>
 #include <linux/fs.h>
 #include <linux/syscalls.h>
+#include <linux/export.h>
 #include <linux/ctype.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h
index 9a196a8..1a633ed 100644
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -43,6 +43,7 @@
 void ps3_init_IRQ(void);
 void ps3_shutdown_IRQ(int cpu);
 void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
 
 /* smp */
 
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index 5e304c2..ca40f6a 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -184,7 +184,7 @@
 	enum ps3_bus_type *bus_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -199,7 +199,7 @@
 	unsigned int *num_dev)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -239,7 +239,7 @@
 	unsigned int dev_index, enum ps3_dev_type *dev_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -256,8 +256,8 @@
 	enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
 {
 	int result;
-	u64 v1;
-	u64 v2;
+	u64 v1 = 0;
+	u64 v2 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -275,7 +275,7 @@
 	enum ps3_reg_type *reg_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -615,7 +615,7 @@
 	unsigned int dev_index, unsigned int *num_regions)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -631,7 +631,7 @@
 	unsigned int *region_id)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 	    make_first_field("bus", bus_index),
@@ -786,7 +786,7 @@
 int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -805,7 +805,7 @@
 int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -827,8 +827,8 @@
 	enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
 {
 	int result;
-	u64 v1;
-	u64 v2;
+	u64 v1 = 0;
+	u64 v2 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -854,7 +854,7 @@
 int ps3_repository_read_boot_dat_size(unsigned int *size)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -869,7 +869,7 @@
 int ps3_repository_read_vuart_av_port(unsigned int *port)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -884,7 +884,7 @@
 int ps3_repository_read_vuart_sysmgr_port(unsigned int *port)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -919,7 +919,7 @@
 int ps3_repository_read_num_be(unsigned int *num_be)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("ben", 0),
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 149bea2..e8ec1b2 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -23,6 +23,7 @@
 #include <linux/fs.h>
 #include <linux/root_dev.h>
 #include <linux/console.h>
+#include <linux/export.h>
 #include <linux/bootmem.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 4c44794..efc1cd8 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -59,46 +59,49 @@
 
 static int ps3_smp_probe(void)
 {
-	return 2;
-}
+	int cpu;
 
-static void __init ps3_smp_setup_cpu(int cpu)
-{
-	int result;
-	unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
-	int i;
+	for (cpu = 0; cpu < 2; cpu++) {
+		int result;
+		unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
+		int i;
 
-	DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+		DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
 
-	/*
-	 * Check assumptions on ps3_ipi_virqs[] indexing. If this
-	 * check fails, then a different mapping of PPC_MSG_
-	 * to index needs to be setup.
-	 */
+		/*
+		* Check assumptions on ps3_ipi_virqs[] indexing. If this
+		* check fails, then a different mapping of PPC_MSG_
+		* to index needs to be setup.
+		*/
 
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
-	BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
-	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
+		BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
+		BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
+		BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+		BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
 
-	for (i = 0; i < MSG_COUNT; i++) {
-		result = ps3_event_receive_port_setup(cpu, &virqs[i]);
+		for (i = 0; i < MSG_COUNT; i++) {
+			result = ps3_event_receive_port_setup(cpu, &virqs[i]);
 
-		if (result)
-			continue;
+			if (result)
+				continue;
 
-		DBG("%s:%d: (%d, %d) => virq %u\n",
-			__func__, __LINE__, cpu, i, virqs[i]);
+			DBG("%s:%d: (%d, %d) => virq %u\n",
+				__func__, __LINE__, cpu, i, virqs[i]);
 
-		result = smp_request_message_ipi(virqs[i], i);
+			result = smp_request_message_ipi(virqs[i], i);
 
-		if (result)
-			virqs[i] = NO_IRQ;
+			if (result)
+				virqs[i] = NO_IRQ;
+			else
+				ps3_register_ipi_irq(cpu, virqs[i]);
+		}
+
+		ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
+
+		DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
 	}
 
-	ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
-
-	DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+	return 2;
 }
 
 void ps3_smp_cleanup_cpu(int cpu)
@@ -121,7 +124,6 @@
 	.probe		= ps3_smp_probe,
 	.message_pass	= ps3_smp_message_pass,
 	.kick_cpu	= smp_generic_kick_cpu,
-	.setup_cpu	= ps3_smp_setup_cpu,
 };
 
 void smp_init_ps3(void)
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 375a9f9..451fad1 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mmzone.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/mm.h>
 
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 23083c3..880eb9c 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -20,7 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -695,12 +695,18 @@
 	return mask >= DMA_BIT_MASK(32);
 }
 
+static u64 ps3_dma_get_required_mask(struct device *_dev)
+{
+	return DMA_BIT_MASK(32);
+}
+
 static struct dma_map_ops ps3_sb_dma_ops = {
 	.alloc_coherent = ps3_alloc_coherent,
 	.free_coherent = ps3_free_coherent,
 	.map_sg = ps3_sb_map_sg,
 	.unmap_sg = ps3_sb_unmap_sg,
 	.dma_supported = ps3_dma_supported,
+	.get_required_mask = ps3_dma_get_required_mask,
 	.map_page = ps3_sb_map_page,
 	.unmap_page = ps3_unmap_page,
 };
@@ -711,6 +717,7 @@
 	.map_sg = ps3_ioc0_map_sg,
 	.unmap_sg = ps3_ioc0_unmap_sg,
 	.dma_supported = ps3_dma_supported,
+	.get_required_mask = ps3_dma_get_required_mask,
 	.map_page = ps3_ioc0_map_page,
 	.unmap_page = ps3_unmap_page,
 };
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 05cf476..c81f6bb 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -15,6 +15,7 @@
 	select PPC_UDBG_16550
 	select PPC_NATIVE
 	select PPC_PCI_CHOICE if EXPERT
+	select ZLIB_DEFLATE
 	default y
 
 config PPC_SPLPAR
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index e9be25b..0f1b706 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -112,6 +112,7 @@
 	dlpar_free_one_cc_node(dn);
 }
 
+#define COMPLETE	0
 #define NEXT_SIBLING    1
 #define NEXT_CHILD      2
 #define NEXT_PROPERTY   3
@@ -158,6 +159,9 @@
 		spin_unlock(&rtas_data_buf_lock);
 
 		switch (rc) {
+		case COMPLETE:
+			break;
+
 		case NEXT_SIBLING:
 			dn = dlpar_parse_cc_node(ccwa);
 			if (!dn)
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index ada6e07..5658690 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/sched.h>	/* for init_mm */
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -29,6 +30,7 @@
 #include <linux/rbtree.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/of.h>
 
 #include <linux/atomic.h>
@@ -1338,7 +1340,7 @@
 static int __init eeh_init_proc(void)
 {
 	if (machine_is(pseries))
-		proc_create("ppc64/eeh", 0, NULL, &proc_eeh_operations);
+		proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
 	return 0;
 }
 __initcall(eeh_init_proc);
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 2ec500c..d2383cf 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
diff --git a/arch/powerpc/platforms/pseries/eeh_sysfs.c b/arch/powerpc/platforms/pseries/eeh_sysfs.c
index 23982c7..eb744ee 100644
--- a/arch/powerpc/platforms/pseries/eeh_sysfs.c
+++ b/arch/powerpc/platforms/pseries/eeh_sysfs.c
@@ -23,6 +23,7 @@
  * Send comments and feedback to Linas Vepstas <linas@austin.ibm.com>
  */
 #include <linux/pci.h>
+#include <linux/stat.h>
 #include <asm/ppc-pci.h>
 #include <asm/pci-bridge.h>
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 83a3ca2..c986d08 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/sched.h>	/* for idle_task_exit */
 #include <linux/cpu.h>
 #include <asm/system.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 041e87c..b344f94 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -24,7 +24,8 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/errno.h>
 #include <asm/hvcall.h>
 #include <asm/hvconsole.h>
 #include "plpar_wrappers.h"
diff --git a/arch/powerpc/platforms/pseries/io_event_irq.c b/arch/powerpc/platforms/pseries/io_event_irq.c
index 2c4dd1f..1a709bc 100644
--- a/arch/powerpc/platforms/pseries/io_event_irq.c
+++ b/arch/powerpc/platforms/pseries/io_event_irq.c
@@ -9,7 +9,7 @@
 
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 01faab9..b719d97 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>	/* for show_stack */
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -939,14 +940,14 @@
 	if (ret) {
 		dev_info(&dev->dev, "failed to map direct window for %s: %d\n",
 			 dn->full_name, ret);
-		goto out_clear_window;
+		goto out_free_window;
 	}
 
 	ret = prom_add_property(pdn, win64);
 	if (ret) {
 		dev_err(&dev->dev, "unable to add dma window property for %s: %d",
 			 pdn->full_name, ret);
-		goto out_clear_window;
+		goto out_free_window;
 	}
 
 	window->device = pdn;
@@ -958,6 +959,9 @@
 	dma_addr = of_read_number(&create.addr_hi, 2);
 	goto out_unlock;
 
+out_free_window:
+	kfree(window);
+
 out_clear_window:
 	remove_ddw(pdn);
 
@@ -1077,12 +1081,38 @@
 	return 0;
 }
 
+static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	if (!disable_ddw && dev_is_pci(dev)) {
+		struct pci_dev *pdev = to_pci_dev(dev);
+		struct device_node *dn;
+
+		dn = pci_device_to_OF_node(pdev);
+
+		/* search upwards for ibm,dma-window */
+		for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table;
+				dn = dn->parent)
+			if (of_get_property(dn, "ibm,dma-window", NULL))
+				break;
+		/* if there is a ibm,ddw-applicable property require 64 bits */
+		if (dn && PCI_DN(dn) &&
+				of_get_property(dn, "ibm,ddw-applicable", NULL))
+			return DMA_BIT_MASK(64);
+	}
+
+	return dma_iommu_ops.get_required_mask(dev);
+}
+
 #else  /* CONFIG_PCI */
 #define pci_dma_bus_setup_pSeries	NULL
 #define pci_dma_dev_setup_pSeries	NULL
 #define pci_dma_bus_setup_pSeriesLP	NULL
 #define pci_dma_dev_setup_pSeriesLP	NULL
 #define dma_set_mask_pSeriesLP		NULL
+#define dma_get_required_mask_pSeriesLP	NULL
 #endif /* !CONFIG_PCI */
 
 static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
@@ -1186,6 +1216,7 @@
 		ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
 		ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
+		ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
 	} else {
 		ppc_md.tce_build = tce_build_pSeries;
 		ppc_md.tce_free  = tce_free_pSeries;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index c9a29da..27a4950 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -25,6 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
 #include <linux/console.h>
+#include <linux/export.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/page.h>
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 3e7f651..029a562 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/kobject.h>
 #include <linux/smp.h>
+#include <linux/stat.h>
 #include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 00cc3a0..a76b228 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -18,6 +18,8 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/kmsg_dump.h>
+#include <linux/ctype.h>
+#include <linux/zlib.h>
 #include <asm/uaccess.h>
 #include <asm/nvram.h>
 #include <asm/rtas.h>
@@ -78,8 +80,41 @@
 #define NVRAM_RTAS_READ_TIMEOUT 5		/* seconds */
 static unsigned long last_unread_rtas_event;	/* timestamp */
 
-/* We preallocate oops_buf during init to avoid kmalloc during oops/panic. */
-static char *oops_buf;
+/*
+ * For capturing and compressing an oops or panic report...
+
+ * big_oops_buf[] holds the uncompressed text we're capturing.
+ *
+ * oops_buf[] holds the compressed text, preceded by a prefix.
+ * The prefix is just a u16 holding the length of the compressed* text.
+ * (*Or uncompressed, if compression fails.)  oops_buf[] gets written
+ * to NVRAM.
+ *
+ * oops_len points to the prefix.  oops_data points to the compressed text.
+ *
+ * +- oops_buf
+ * |		+- oops_data
+ * v		v
+ * +------------+-----------------------------------------------+
+ * | length	| text                                          |
+ * | (2 bytes)	| (oops_data_sz bytes)                          |
+ * +------------+-----------------------------------------------+
+ * ^
+ * +- oops_len
+ *
+ * We preallocate these buffers during init to avoid kmalloc during oops/panic.
+ */
+static size_t big_oops_buf_sz;
+static char *big_oops_buf, *oops_buf;
+static u16 *oops_len;
+static char *oops_data;
+static size_t oops_data_sz;
+
+/* Compression parameters */
+#define COMPR_LEVEL 6
+#define WINDOW_BITS 12
+#define MEM_LEVEL 4
+static struct z_stream_s stream;
 
 static ssize_t pSeries_nvram_read(char *buf, size_t count, loff_t *index)
 {
@@ -387,11 +422,44 @@
 						sizeof(rtas_log_partition));
 	}
 	oops_buf = kmalloc(oops_log_partition.size, GFP_KERNEL);
+	if (!oops_buf) {
+		pr_err("nvram: No memory for %s partition\n",
+						oops_log_partition.name);
+		return;
+	}
+	oops_len = (u16*) oops_buf;
+	oops_data = oops_buf + sizeof(u16);
+	oops_data_sz = oops_log_partition.size - sizeof(u16);
+
+	/*
+	 * Figure compression (preceded by elimination of each line's <n>
+	 * severity prefix) will reduce the oops/panic report to at most
+	 * 45% of its original size.
+	 */
+	big_oops_buf_sz = (oops_data_sz * 100) / 45;
+	big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
+	if (big_oops_buf) {
+		stream.workspace = kmalloc(zlib_deflate_workspacesize(
+				WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
+		if (!stream.workspace) {
+			pr_err("nvram: No memory for compression workspace; "
+				"skipping compression of %s partition data\n",
+				oops_log_partition.name);
+			kfree(big_oops_buf);
+			big_oops_buf = NULL;
+		}
+	} else {
+		pr_err("No memory for uncompressed %s data; "
+			"skipping compression\n", oops_log_partition.name);
+		stream.workspace = NULL;
+	}
+
 	rc = kmsg_dump_register(&nvram_kmsg_dumper);
 	if (rc != 0) {
 		pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc);
 		kfree(oops_buf);
-		return;
+		kfree(big_oops_buf);
+		kfree(stream.workspace);
 	}
 }
 
@@ -473,7 +541,83 @@
 						NVRAM_RTAS_READ_TIMEOUT);
 }
 
-/* our kmsg_dump callback */
+/* Squeeze out each line's <n> severity prefix. */
+static size_t elide_severities(char *buf, size_t len)
+{
+	char *in, *out, *buf_end = buf + len;
+	/* Assume a <n> at the very beginning marks the start of a line. */
+	int newline = 1;
+
+	in = out = buf;
+	while (in < buf_end) {
+		if (newline && in+3 <= buf_end &&
+				*in == '<' && isdigit(in[1]) && in[2] == '>') {
+			in += 3;
+			newline = 0;
+		} else {
+			newline = (*in == '\n');
+			*out++ = *in++;
+		}
+	}
+	return out - buf;
+}
+
+/* Derived from logfs_compress() */
+static int nvram_compress(const void *in, void *out, size_t inlen,
+							size_t outlen)
+{
+	int err, ret;
+
+	ret = -EIO;
+	err = zlib_deflateInit2(&stream, COMPR_LEVEL, Z_DEFLATED, WINDOW_BITS,
+						MEM_LEVEL, Z_DEFAULT_STRATEGY);
+	if (err != Z_OK)
+		goto error;
+
+	stream.next_in = in;
+	stream.avail_in = inlen;
+	stream.total_in = 0;
+	stream.next_out = out;
+	stream.avail_out = outlen;
+	stream.total_out = 0;
+
+	err = zlib_deflate(&stream, Z_FINISH);
+	if (err != Z_STREAM_END)
+		goto error;
+
+	err = zlib_deflateEnd(&stream);
+	if (err != Z_OK)
+		goto error;
+
+	if (stream.total_out >= stream.total_in)
+		goto error;
+
+	ret = stream.total_out;
+error:
+	return ret;
+}
+
+/* Compress the text from big_oops_buf into oops_buf. */
+static int zip_oops(size_t text_len)
+{
+	int zipped_len = nvram_compress(big_oops_buf, oops_data, text_len,
+								oops_data_sz);
+	if (zipped_len < 0) {
+		pr_err("nvram: compression failed; returned %d\n", zipped_len);
+		pr_err("nvram: logging uncompressed oops/panic report\n");
+		return -1;
+	}
+	*oops_len = (u16) zipped_len;
+	return 0;
+}
+
+/*
+ * This is our kmsg_dump callback, called after an oops or panic report
+ * has been written to the printk buffer.  We want to capture as much
+ * of the printk buffer as possible.  First, capture as much as we can
+ * that we think will compress sufficiently to fit in the lnx,oops-log
+ * partition.  If that's too much, go back and capture uncompressed text.
+ */
 static void oops_to_nvram(struct kmsg_dumper *dumper,
 		enum kmsg_dump_reason reason,
 		const char *old_msgs, unsigned long old_len,
@@ -482,6 +626,8 @@
 	static unsigned int oops_count = 0;
 	static bool panicking = false;
 	size_t text_len;
+	unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
+	int rc = -1;
 
 	switch (reason) {
 	case KMSG_DUMP_RESTART:
@@ -509,8 +655,19 @@
 	if (clobbering_unread_rtas_event())
 		return;
 
-	text_len = capture_last_msgs(old_msgs, old_len, new_msgs, new_len,
-					oops_buf, oops_log_partition.size);
+	if (big_oops_buf) {
+		text_len = capture_last_msgs(old_msgs, old_len,
+			new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
+		text_len = elide_severities(big_oops_buf, text_len);
+		rc = zip_oops(text_len);
+	}
+	if (rc != 0) {
+		text_len = capture_last_msgs(old_msgs, old_len,
+				new_msgs, new_len, oops_data, oops_data_sz);
+		err_type = ERR_TYPE_KERNEL_PANIC;
+		*oops_len = (u16) text_len;
+	}
+
 	(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
-		(int) text_len, ERR_TYPE_KERNEL_PANIC, ++oops_count);
+		(int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
 }
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 3bf4488..55d4ec1 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -26,6 +26,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 41c24c1..342797f 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -1,7 +1,10 @@
 #ifndef _PSERIES_PLPAR_WRAPPERS_H
 #define _PSERIES_PLPAR_WRAPPERS_H
 
+#include <linux/string.h>
+
 #include <asm/hvcall.h>
+#include <asm/paca.h>
 #include <asm/page.h>
 
 /* Get state of physical CPU from query_cpu_stopped */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 0969fd9..c3408ca 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -34,7 +34,7 @@
 #include <linux/pci.h>
 #include <linux/utsname.h>
 #include <linux/adb.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/seq_file.h>
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 4e44c4d..26e93fd 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -14,7 +14,6 @@
 
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index a8ca289..d3de084 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -18,6 +18,7 @@
 
 #include <linux/delay.h>
 #include <linux/suspend.h>
+#include <linux/stat.h>
 #include <asm/firmware.h>
 #include <asm/hvcall.h>
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
index c3c48eb..bd560c7 100644
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -1,5 +1,12 @@
 config PPC_WSP
 	bool
+	select PPC_A2
+	select PPC_SCOM
+	select PPC_XICS
+	select PPC_ICP_NATIVE
+	select PCI
+	select PPC_IO_WORKAROUNDS if PCI
+	select PPC_INDIRECT_PIO if PCI
 	default n
 
 menu "WSP platform selection"
@@ -7,13 +14,9 @@
 
 config PPC_PSR2
 	bool "PSR-2 platform"
-	select PPC_A2
 	select GENERIC_TBSYNC
-	select PPC_SCOM
 	select EPAPR_BOOT
 	select PPC_WSP
-	select PPC_XICS
-	select PPC_ICP_NATIVE
 	default y
 
 endmenu
@@ -21,8 +24,3 @@
 config PPC_A2_DD2
 	bool "Support for DD2 based A2/WSP systems"
 	depends on PPC_A2
-
-config WORKAROUND_ERRATUM_463
-	depends on PPC_A2_DD2
-	bool "Workaround erratum 463"
-	default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
index 095be73..a1486b4 100644
--- a/arch/powerpc/platforms/wsp/Makefile
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -4,3 +4,5 @@
 obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
 obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
 obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
+obj-$(CONFIG_PCI)		+= wsp_pci.o
+obj-$(CONFIG_PCI_MSI)		+= msi.o
\ No newline at end of file
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
index e53bd9e..5768743 100644
--- a/arch/powerpc/platforms/wsp/ics.c
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -710,3 +710,51 @@
 	/* We need to patch our irq chip's EOI to point to the right ICP */
 	wsp_irq_chip.irq_eoi = icp_ops->eoi;
 }
+
+#ifdef CONFIG_PCI_MSI
+static void wsp_ics_msi_unmask_irq(struct irq_data *d)
+{
+	wsp_chip_unmask_irq(d);
+	unmask_msi_irq(d);
+}
+
+static unsigned int wsp_ics_msi_startup(struct irq_data *d)
+{
+	wsp_ics_msi_unmask_irq(d);
+	return 0;
+}
+
+static void wsp_ics_msi_mask_irq(struct irq_data *d)
+{
+	mask_msi_irq(d);
+	wsp_chip_mask_irq(d);
+}
+
+/*
+ * we do it this way because we reassinge default EOI handling in
+ * irq_init() above
+ */
+static void wsp_ics_eoi(struct irq_data *data)
+{
+	wsp_irq_chip.irq_eoi(data);
+}
+
+static struct irq_chip wsp_ics_msi = {
+	.name = "WSP ICS MSI",
+	.irq_startup = wsp_ics_msi_startup,
+	.irq_mask = wsp_ics_msi_mask_irq,
+	.irq_unmask = wsp_ics_msi_unmask_irq,
+	.irq_eoi = wsp_ics_eoi,
+	.irq_set_affinity = wsp_chip_set_affinity
+};
+
+void wsp_ics_set_msi_chip(unsigned int irq)
+{
+	irq_set_chip(irq, &wsp_ics_msi);
+}
+
+void wsp_ics_set_std_chip(unsigned int irq)
+{
+	irq_set_chip(irq, &wsp_irq_chip);
+}
+#endif /* CONFIG_PCI_MSI */
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
index e34d531..07b644e 100644
--- a/arch/powerpc/platforms/wsp/ics.h
+++ b/arch/powerpc/platforms/wsp/ics.h
@@ -17,4 +17,9 @@
 extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
 extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
 
+#ifdef CONFIG_PCI_MSI
+extern void wsp_ics_set_msi_chip(unsigned int irq);
+extern void wsp_ics_set_std_chip(unsigned int irq);
+#endif /* CONFIG_PCI_MSI */
+
 #endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/msi.c b/arch/powerpc/platforms/wsp/msi.c
new file mode 100644
index 0000000..380882f
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/msi.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "msi.h"
+#include "ics.h"
+#include "wsp_pci.h"
+
+/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */
+#define MSI_ADDR_32		0xFFFF0000ul
+#define MSI_ADDR_64		0x1000000000000000ul
+
+int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	struct pci_controller *phb;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	unsigned int virq;
+	int hwirq;
+
+	phb = pci_bus_to_host(dev->bus);
+	if (!phb)
+		return -ENOENT;
+
+	entry = list_first_entry(&dev->msi_list, struct msi_desc, list);
+	if (entry->msi_attrib.is_64) {
+		msg.address_lo = 0;
+		msg.address_hi = MSI_ADDR_64 >> 32;
+	} else {
+		msg.address_lo = MSI_ADDR_32;
+		msg.address_hi = 0;
+	}
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		hwirq = wsp_ics_alloc_irq(phb->dn, 1);
+		if (hwirq < 0) {
+			dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n");
+			return hwirq;
+		}
+
+		virq = irq_create_mapping(NULL, hwirq);
+		if (virq == NO_IRQ) {
+			dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n");
+			return -1;
+		}
+
+		dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n",
+			hwirq, virq);
+
+		wsp_ics_set_msi_chip(virq);
+		irq_set_msi_desc(virq, entry);
+		msg.data = hwirq & XIVE_ADDR_MASK;
+		write_msi_msg(virq, &msg);
+	}
+
+	return 0;
+}
+
+void wsp_teardown_msi_irqs(struct pci_dev *dev)
+{
+	struct pci_controller *phb;
+	struct msi_desc *entry;
+	int hwirq;
+
+	phb = pci_bus_to_host(dev->bus);
+
+	dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n");
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+
+		irq_set_msi_desc(entry->irq, NULL);
+		wsp_ics_set_std_chip(entry->irq);
+
+		hwirq = virq_to_hw(entry->irq);
+		/* In this order to avoid racing with irq_create_mapping() */
+		irq_dispose_mapping(entry->irq);
+		wsp_ics_free_irq(phb->dn, hwirq);
+	}
+}
+
+void wsp_setup_phb_msi(struct pci_controller *phb)
+{
+	/* Create a single MVE at offset 0 that matches everything */
+	out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT);
+	out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63);
+
+	ppc_md.setup_msi_irqs = wsp_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs;
+}
diff --git a/arch/powerpc/platforms/wsp/msi.h b/arch/powerpc/platforms/wsp/msi.h
new file mode 100644
index 0000000..0ab27b7
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/msi.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __WSP_MSI_H
+#define __WSP_MSI_H
+
+#ifdef CONFIG_PCI_MSI
+extern void wsp_setup_phb_msi(struct pci_controller *phb);
+#else
+static inline void wsp_setup_phb_msi(struct pci_controller *phb) { }
+#endif
+
+#endif /* __WSP_MSI_H */
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
index 40f2891..166f2e4 100644
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -63,6 +63,10 @@
 #ifdef CONFIG_SMP
 	a2_setup_smp();
 #endif
+#ifdef CONFIG_PCI
+	wsp_setup_pci();
+#endif
+
 }
 
 static int __init psr2_probe(void)
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 7c3e087..3347981 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -3,6 +3,9 @@
 
 #include <asm/wsp.h>
 
+/* Devtree compatible strings for major devices */
+#define PCIE_COMPATIBLE     "ibm,wsp-pciex"
+
 extern void wsp_setup_pci(void);
 extern void scom_init_wsp(void);
 
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
new file mode 100644
index 0000000..e0262cd
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -0,0 +1,1133 @@
+/*
+ * Copyright 2010 Ben Herrenschmidt, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/debugfs.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/iommu.h>
+#include <asm/io-workarounds.h>
+
+#include "wsp.h"
+#include "wsp_pci.h"
+#include "msi.h"
+
+
+/* Max number of TVTs for one table. Only 32-bit tables can use
+ * multiple TVTs and so the max currently supported is thus 8
+ * since only 2G of DMA space is supported
+ */
+#define MAX_TABLE_TVT_COUNT		8
+
+struct wsp_dma_table {
+	struct list_head	link;
+	struct iommu_table	table;
+	struct wsp_phb	*phb;
+	struct page		*tces[MAX_TABLE_TVT_COUNT];
+};
+
+/* We support DMA regions from 0...2G in 32bit space (no support for
+ * 64-bit DMA just yet). Each device gets a separate TCE table (TVT
+ * entry) with validation enabled (though not supported by SimiCS
+ * just yet).
+ *
+ * To simplify things, we divide this 2G space into N regions based
+ * on the constant below which could be turned into a tunable eventually
+ *
+ * We then assign dynamically those regions to devices as they show up.
+ *
+ * We use a bitmap as an allocator for these.
+ *
+ * Tables are allocated/created dynamically as devices are discovered,
+ * multiple TVT entries are used if needed
+ *
+ * When 64-bit DMA support is added we should simply use a separate set
+ * of larger regions (the HW supports 64 TVT entries). We can
+ * additionally create a bypass region in 64-bit space for performances
+ * though that would have a cost in term of security.
+ *
+ * If you set NUM_DMA32_REGIONS to 1, then a single table is shared
+ * for all devices and bus/dev/fn validation is disabled
+ *
+ * Note that a DMA32 region cannot be smaller than 256M so the max
+ * supported here for now is 8. We don't yet support sharing regions
+ * between multiple devices so the max number of devices supported
+ * is MAX_TABLE_TVT_COUNT.
+ */
+#define NUM_DMA32_REGIONS	1
+
+struct wsp_phb {
+	struct pci_controller	*hose;
+
+	/* Lock controlling access to the list of dma tables.
+	 * It does -not- protect against dma_* operations on
+	 * those tables, those should be stopped before an entry
+	 * is removed from the list.
+	 *
+	 * The lock is also used for error handling operations
+	 */
+	spinlock_t		lock;
+	struct list_head	dma_tables;
+	unsigned long		dma32_map;
+	unsigned long		dma32_base;
+	unsigned int		dma32_num_regions;
+	unsigned long		dma32_region_size;
+
+	/* Debugfs stuff */
+	struct dentry		*ddir;
+
+	struct list_head	all;
+};
+static LIST_HEAD(wsp_phbs);
+
+//#define cfg_debug(fmt...)	pr_debug(fmt)
+#define cfg_debug(fmt...)
+
+
+static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+				  int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	int suboff;
+	u64 addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (offset >= 0x1000)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
+	addr = PCIE_REG_CA_ENABLE |
+		((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+		((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+		((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+	suboff = offset & 3;
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+
+	switch (len) {
+	case 1:
+		addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		*val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+			>> (suboff << 3)) & 0xff;
+		cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, *val);
+		break;
+	case 2:
+		addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		*val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+			>> (suboff << 3)) & 0xffff;
+		cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, *val);
+		break;
+	default:
+		addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		*val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
+		cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, *val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+				   int offset, int len, u32 val)
+{
+	struct pci_controller *hose;
+	int suboff;
+	u64 addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (offset >= 0x1000)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
+	addr = PCIE_REG_CA_ENABLE |
+		((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+		((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+		((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+	suboff = offset & 3;
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+		val <<= suboff << 3;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+		cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, val);
+		break;
+	case 2:
+		addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+		val <<= suboff << 3;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+		cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, val);
+		break;
+	default:
+		addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+		out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+		out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+		cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+			  bus->number, devfn >> 3, devfn & 7,
+			  offset, suboff, addr, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops wsp_pcie_pci_ops =
+{
+	.read = wsp_pcie_read_config,
+	.write = wsp_pcie_write_config,
+};
+
+#define TCE_SHIFT		12
+#define TCE_PAGE_SIZE		(1 << TCE_SHIFT)
+#define TCE_PCI_WRITE		0x2		 /* write from PCI allowed */
+#define TCE_PCI_READ		0x1	 	 /* read from PCI allowed */
+#define TCE_RPN_MASK		0x3fffffffffful  /* 42-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT		12
+
+//#define dma_debug(fmt...)	pr_debug(fmt)
+#define dma_debug(fmt...)
+
+static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
+			   unsigned long uaddr, enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
+{
+	struct wsp_dma_table *ptbl = container_of(tbl,
+						    struct wsp_dma_table,
+						    table);
+	u64 proto_tce;
+	u64 *tcep;
+	u64 rpn;
+
+	proto_tce = TCE_PCI_READ;
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+	proto_tce |= TCE_PCI_WRITE;
+#else
+	if (direction != DMA_TO_DEVICE)
+		proto_tce |= TCE_PCI_WRITE;
+#endif
+
+	/* XXX Make this faster by factoring out the page address for
+	 * within a TCE table
+	 */
+	while (npages--) {
+		/* We don't use it->base as the table can be scattered */
+		tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+		tcep += (index & 0xffff);
+
+		/* can't move this out since we might cross LMB boundary */
+		rpn = __pa(uaddr) >> TCE_SHIFT;
+		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+		dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
+			  tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT);
+
+		uaddr += TCE_PAGE_SIZE;
+		index++;
+	}
+	return 0;
+}
+
+static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
+{
+	struct wsp_dma_table *ptbl = container_of(tbl,
+						    struct wsp_dma_table,
+						    table);
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+	struct pci_controller *hose = ptbl->phb->hose;
+#endif
+	u64 *tcep;
+
+	/* XXX Make this faster by factoring out the page address for
+	 * within a TCE table. Also use line-kill option to kill multiple
+	 * TCEs at once
+	 */
+	while (npages--) {
+		/* We don't use it->base as the table can be scattered */
+		tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+		tcep += (index & 0xffff);
+		dma_debug("[DMA] TCE %p cleared\n", tcep);
+		*tcep = 0;
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+		/* Don't write there since it would pollute other MMIO accesses */
+		out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
+			 PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
+			 (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
+#endif
+		index++;
+	}
+}
+
+static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
+							    unsigned int region,
+							    struct pci_dev *validate)
+{
+	struct pci_controller *hose = phb->hose;
+	unsigned long size = phb->dma32_region_size;
+	unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
+	struct wsp_dma_table *tbl;
+	int tvts_per_table, i, tvt, nid;
+	unsigned long flags;
+
+	nid = of_node_to_nid(phb->hose->dn);
+
+	/* Calculate how many TVTs are needed */
+	tvts_per_table = size / 0x10000000;
+	if (tvts_per_table == 0)
+		tvts_per_table = 1;
+
+	/* Calculate the base TVT index. We know all tables have the same
+	 * size so we just do a simple multiply here
+	 */
+	tvt = region * tvts_per_table;
+
+	pr_debug("         Region : %d\n", region);
+	pr_debug("      DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
+	pr_debug(" Number of TVTs : %d\n", tvts_per_table);
+	pr_debug("       Base TVT : %d\n", tvt);
+	pr_debug("         Node   : %d\n", nid);
+
+	tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
+	if (!tbl)
+		return ERR_PTR(-ENOMEM);
+	tbl->phb = phb;
+
+	/* Create as many TVTs as needed, each represents 256M at most */
+	for (i = 0; i < tvts_per_table; i++) {
+		u64 tvt_data1, tvt_data0;
+
+		/* Allocate table. We use a 4K TCE size for now always so
+		 * one table is always 8 * (258M / 4K) == 512K
+		 */
+		tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
+		if (tbl->tces[i] == NULL)
+			goto fail;
+		memset(page_address(tbl->tces[i]), 0, 0x80000);
+
+		pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
+
+		/* Table size. We currently set it to be the whole 256M region */
+		tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
+		/* IO page size set to 4K */
+		tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
+		/* Shift in the address */
+		tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
+
+		/* Validation stuff. We only validate fully bus/dev/fn for now
+		 * one day maybe we can group devices but that isn't the case
+		 * at the moment
+		 */
+		if (validate) {
+			tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
+			tvt_data0 |= validate->bus->number;
+			tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
+			tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
+				<< IODA_TVT1_DEVNUM_VALUE_SHIFT;
+			tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
+			tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
+				<< IODA_TVT1_FUNCNUM_VALUE_SHIFT;
+		}
+
+		/* XX PE number is always 0 for now */
+
+		/* Program the values using the PHB lock */
+		spin_lock_irqsave(&phb->lock, flags);
+		out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+			 (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
+		out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
+		out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
+		spin_unlock_irqrestore(&phb->lock, flags);
+	}
+
+	/* Init bits and pieces */
+	tbl->table.it_blocksize = 16;
+	tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT;
+	tbl->table.it_size = size >> IOMMU_PAGE_SHIFT;
+
+	/*
+	 * It's already blank but we clear it anyway.
+	 * Consider an aditiona interface that makes cleaing optional
+	 */
+	iommu_init_table(&tbl->table, nid);
+
+	list_add(&tbl->link, &phb->dma_tables);
+	return tbl;
+
+ fail:
+	pr_debug("  Failed to allocate a 256M TCE table !\n");
+	for (i = 0; i < tvts_per_table; i++)
+		if (tbl->tces[i])
+			__free_pages(tbl->tces[i], get_order(0x80000));
+	kfree(tbl);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void __devinit wsp_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+	struct dev_archdata *archdata = &pdev->dev.archdata;
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct wsp_phb *phb = hose->private_data;
+	struct wsp_dma_table *table = NULL;
+	unsigned long flags;
+	int i;
+
+	/* Don't assign an iommu table to a bridge */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		return;
+
+	pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
+
+	spin_lock_irqsave(&phb->lock, flags);
+
+	/* If only one region, check if it already exist */
+	if (phb->dma32_num_regions == 1) {
+		spin_unlock_irqrestore(&phb->lock, flags);
+		if (list_empty(&phb->dma_tables))
+			table = wsp_pci_create_dma32_table(phb, 0, NULL);
+		else
+			table = list_first_entry(&phb->dma_tables,
+						 struct wsp_dma_table,
+						 link);
+	} else {
+		/* else find a free region */
+		for (i = 0; i < phb->dma32_num_regions && !table; i++) {
+			if (__test_and_set_bit(i, &phb->dma32_map))
+				continue;
+			spin_unlock_irqrestore(&phb->lock, flags);
+			table = wsp_pci_create_dma32_table(phb, i, pdev);
+		}
+	}
+
+	/* Check if we got an error */
+	if (IS_ERR(table)) {
+		pr_err("%s: Failed to create DMA table, err %ld !\n",
+		       pci_name(pdev), PTR_ERR(table));
+		return;
+	}
+
+	/* Or a valid table */
+	if (table) {
+		pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
+			pci_name(pdev),
+			table->table.it_offset << IOMMU_PAGE_SHIFT,
+			(table->table.it_offset << IOMMU_PAGE_SHIFT)
+			+ phb->dma32_region_size - 1);
+		archdata->dma_data.iommu_table_base = &table->table;
+		return;
+	}
+
+	/* Or no room */
+	spin_unlock_irqrestore(&phb->lock, flags);
+	pr_err("%s: Out of DMA space !\n", pci_name(pdev));
+}
+
+static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
+{
+	u64 val;
+	int i;
+
+#define DUMP_REG(x) \
+	pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
+	/* WSP DD1 has a bogus class code by default in the PCI-E
+	 * root complex's built-in P2P bridge */
+	val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
+	pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
+	out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
+		 (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
+	pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
+#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+	/* XXX Disable TCE caching, it doesn't work on DD1 */
+	out_be64(hose->cfg_data + 0xe50,
+		 in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
+	printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
+#endif
+
+	/* Configure M32A and IO. IO is hard wired to be 1M for now */
+	out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
+	out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
+		 (~(hose->io_resource.end - hose->io_resource.start)) &
+		 0x3fffffff000ul);
+	out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
+
+	out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
+		 hose->mem_resources[0].start);
+	printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
+		 (~(hose->mem_resources[0].end -
+		    hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+	out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
+		 (~(hose->mem_resources[0].end -
+		    hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+	out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
+		 (hose->mem_resources[0].start - hose->pci_mem_offset) | 1);
+
+	/* Clear all TVT entries
+	 *
+	 * XX Might get TVT count from device-tree
+	 */
+	for (i = 0; i < IODA_TVT_COUNT; i++) {
+		out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+			 PCIE_REG_IODA_AD_TBL_TVT | i);
+		out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
+		out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
+	}
+
+	/* Kill the TCE cache */
+	out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
+		 in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
+		 PCIE_REG_PHBC_64B_TCE_EN);
+
+	/* Enable 32 & 64-bit MSIs, IO space and M32A */
+	val = PCIE_REG_PHBC_32BIT_MSI_EN |
+	      PCIE_REG_PHBC_IO_EN |
+	      PCIE_REG_PHBC_64BIT_MSI_EN |
+	      PCIE_REG_PHBC_M32A_EN;
+	if (iommu_is_off)
+		val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
+	pr_debug("Will write config: 0x%llx\n", val);
+	out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
+
+	/* Enable error reporting */
+	out_be64(hose->cfg_data + 0xe00,
+		 in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
+
+	/* Mask an error that's generated when doing config space probe
+	 *
+	 * XXX Maybe we should only mask it around config space cycles... that or
+	 * ignore it when we know we had a config space cycle recently ?
+	 */
+	out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
+	out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
+
+	/* Enable UTL errors, for now, all of them got to UTL irq 1
+	 *
+	 * We similarily mask one UTL error caused apparently during normal
+	 * probing. We also mask the link up error
+	 */
+	out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
+	out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
+	out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
+	out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
+	out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
+	out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
+
+	DUMP_REG(PCIE_REG_IO_BASE_ADDR);
+	DUMP_REG(PCIE_REG_IO_BASE_MASK);
+	DUMP_REG(PCIE_REG_IO_START_ADDR);
+	DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
+	DUMP_REG(PCIE_REG_M32A_BASE_MASK);
+	DUMP_REG(PCIE_REG_M32A_START_ADDR);
+	DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
+	DUMP_REG(PCIE_REG_M32B_BASE_MASK);
+	DUMP_REG(PCIE_REG_M32B_START_ADDR);
+	DUMP_REG(PCIE_REG_M64_BASE_ADDR);
+	DUMP_REG(PCIE_REG_M64_BASE_MASK);
+	DUMP_REG(PCIE_REG_M64_START_ADDR);
+	DUMP_REG(PCIE_REG_PHB_CONFIG);
+}
+
+static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
+{
+	u64 val;
+	int i;
+
+	for (i = 0; i < 10000; i++) {
+		val = in_be64(phb->hose->cfg_data + 0xe08);
+		if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
+			return;
+		udelay(1);
+	}
+	pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
+		   phb->hose->global_number, port);
+}
+
+#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa)		\
+static ret wsp_pci_##name at					\
+{								\
+	struct iowa_bus *bus;					\
+	struct wsp_phb *phb;					\
+	unsigned long flags;					\
+	ret rval;						\
+	bus = iowa_pio_find_bus(aa);				\
+	WARN_ON(!bus);						\
+	phb = bus->private;					\
+	spin_lock_irqsave(&phb->lock, flags);			\
+	wsp_pci_wait_io_idle(phb, aa);				\
+	rval = __do_##name al;					\
+	spin_unlock_irqrestore(&phb->lock, flags);		\
+	return rval;						\
+}
+
+#define DEF_PCI_AC_NORET_pio(name, at, al, aa)			\
+static void wsp_pci_##name at					\
+{								\
+	struct iowa_bus *bus;					\
+	struct wsp_phb *phb;					\
+	unsigned long flags;					\
+	bus = iowa_pio_find_bus(aa);				\
+	WARN_ON(!bus);						\
+	phb = bus->private;					\
+	spin_lock_irqsave(&phb->lock, flags);			\
+	wsp_pci_wait_io_idle(phb, aa);				\
+	__do_##name al;						\
+	spin_unlock_irqrestore(&phb->lock, flags);		\
+}
+
+#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
+#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
+	DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
+	DEF_PCI_AC_NORET_##space(name, at, al, aa)		\
+
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+static struct ppc_pci_io wsp_pci_iops = {
+	.inb = wsp_pci_inb,
+	.inw = wsp_pci_inw,
+	.inl = wsp_pci_inl,
+	.outb = wsp_pci_outb,
+	.outw = wsp_pci_outw,
+	.outl = wsp_pci_outl,
+	.insb = wsp_pci_insb,
+	.insw = wsp_pci_insw,
+	.insl = wsp_pci_insl,
+	.outsb = wsp_pci_outsb,
+	.outsw = wsp_pci_outsw,
+	.outsl = wsp_pci_outsl,
+};
+
+static int __init wsp_setup_one_phb(struct device_node *np)
+{
+	struct pci_controller *hose;
+	struct wsp_phb *phb;
+
+	pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
+
+	phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
+	if (!phb)
+		return -ENOMEM;
+	hose = pcibios_alloc_controller(np);
+	if (!hose) {
+		/* Can't really free the phb */
+		return -ENOMEM;
+	}
+	hose->private_data = phb;
+	phb->hose = hose;
+
+	INIT_LIST_HEAD(&phb->dma_tables);
+	spin_lock_init(&phb->lock);
+
+	/* XXX Use bus-range property ? */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* We use cfg_data as the address for the whole bridge MMIO space
+	 */
+	hose->cfg_data = of_iomap(hose->dn, 0);
+
+	pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
+
+	/* Get the ranges of the device-tree */
+	pci_process_bridge_OF_ranges(hose, np, 0);
+
+	/* XXX Force re-assigning of everything for now */
+	pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
+		      PCI_ENABLE_PROC_DOMAINS);
+	pci_probe_only = 0;
+
+	/* Calculate how the TCE space is divided */
+	phb->dma32_base		= 0;
+	phb->dma32_num_regions	= NUM_DMA32_REGIONS;
+	if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
+		pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
+			   MAX_TABLE_TVT_COUNT);
+		phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
+	}
+	phb->dma32_region_size	= 0x80000000 / phb->dma32_num_regions;
+
+	BUG_ON(!is_power_of_2(phb->dma32_region_size));
+
+	/* Setup config ops */
+	hose->ops = &wsp_pcie_pci_ops;
+
+	/* Configure the HW */
+	wsp_pcie_configure_hw(hose);
+
+	/* Instanciate IO workarounds */
+	iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
+#ifdef CONFIG_PCI_MSI
+	wsp_setup_phb_msi(hose);
+#endif
+
+	/* Add to global list */
+	list_add(&phb->all, &wsp_phbs);
+
+	return 0;
+}
+
+void __init wsp_setup_pci(void)
+{
+	struct device_node *np;
+	int rc;
+
+	/* Find host bridges */
+	for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
+		rc = wsp_setup_one_phb(np);
+		if (rc)
+			pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
+			       np->full_name, rc);
+	}
+
+	/* Establish device-tree linkage */
+	pci_devs_phb_init();
+
+	/* Set DMA ops to use TCEs */
+	if (iommu_is_off) {
+		pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
+		set_pci_dma_ops(&dma_direct_ops);
+	} else {
+		ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
+		ppc_md.tce_build = tce_build_wsp;
+		ppc_md.tce_free = tce_free_wsp;
+		set_pci_dma_ops(&dma_iommu_ops);
+	}
+}
+
+#define err_debug(fmt...)	pr_debug(fmt)
+//#define err_debug(fmt...)
+
+static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
+{
+	const u32 *prop;
+	int hw_irq;
+
+	/* Ok, no interrupts property, let's try to find our child P2P */
+	np = of_get_next_child(np, NULL);
+	if (np == NULL)
+		return 0;
+
+	/* Grab it's interrupt map */
+	prop = of_get_property(np, "interrupt-map", NULL);
+	if (prop == NULL)
+		return 0;
+
+	/* Grab one of the interrupts in there, keep the low 4 bits */
+	hw_irq = prop[5] & 0xf;
+
+	/* 0..4 for PHB 0 and 5..9 for PHB 1 */
+	if (hw_irq < 5)
+		hw_irq = 4;
+	else
+		hw_irq = 9;
+	hw_irq |= prop[5] & ~0xf;
+
+	err_debug("PCI: Using 0x%x as error IRQ for %s\n",
+		  hw_irq, np->parent->full_name);
+	return irq_create_mapping(NULL, hw_irq);
+}
+
+static const struct {
+	u32 offset;
+	const char *name;
+} wsp_pci_regs[] = {
+#define DREG(x) { PCIE_REG_##x, #x }
+#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
+	/* Architected registers except CONFIG_ and IODA
+         * to avoid side effects
+	 */
+	DREG(DMA_CHAN_STATUS),
+	DREG(CPU_LOADSTORE_STATUS),
+	DREG(LOCK0),
+	DREG(LOCK1),
+	DREG(PHB_CONFIG),
+	DREG(IO_BASE_ADDR),
+	DREG(IO_BASE_MASK),
+	DREG(IO_START_ADDR),
+	DREG(M32A_BASE_ADDR),
+	DREG(M32A_BASE_MASK),
+	DREG(M32A_START_ADDR),
+	DREG(M32B_BASE_ADDR),
+	DREG(M32B_BASE_MASK),
+	DREG(M32B_START_ADDR),
+	DREG(M64_BASE_ADDR),
+	DREG(M64_BASE_MASK),
+	DREG(M64_START_ADDR),
+	DREG(TCE_KILL),
+	DREG(LOCK2),
+	DREG(PHB_GEN_CAP),
+	DREG(PHB_TCE_CAP),
+	DREG(PHB_IRQ_CAP),
+	DREG(PHB_EEH_CAP),
+	DREG(PAPR_ERR_INJ_CONTROL),
+	DREG(PAPR_ERR_INJ_ADDR),
+	DREG(PAPR_ERR_INJ_MASK),
+
+	/* UTL core regs */
+	DUTL(SYS_BUS_CONTROL),
+	DUTL(STATUS),
+	DUTL(SYS_BUS_AGENT_STATUS),
+	DUTL(SYS_BUS_AGENT_ERR_SEV),
+	DUTL(SYS_BUS_AGENT_IRQ_EN),
+	DUTL(SYS_BUS_BURST_SZ_CONF),
+	DUTL(REVISION_ID),
+	DUTL(OUT_POST_HDR_BUF_ALLOC),
+	DUTL(OUT_POST_DAT_BUF_ALLOC),
+	DUTL(IN_POST_HDR_BUF_ALLOC),
+	DUTL(IN_POST_DAT_BUF_ALLOC),
+	DUTL(OUT_NP_BUF_ALLOC),
+	DUTL(IN_NP_BUF_ALLOC),
+	DUTL(PCIE_TAGS_ALLOC),
+	DUTL(GBIF_READ_TAGS_ALLOC),
+
+	DUTL(PCIE_PORT_CONTROL),
+	DUTL(PCIE_PORT_STATUS),
+	DUTL(PCIE_PORT_ERROR_SEV),
+	DUTL(PCIE_PORT_IRQ_EN),
+	DUTL(RC_STATUS),
+	DUTL(RC_ERR_SEVERITY),
+	DUTL(RC_IRQ_EN),
+	DUTL(EP_STATUS),
+	DUTL(EP_ERR_SEVERITY),
+	DUTL(EP_ERR_IRQ_EN),
+	DUTL(PCI_PM_CTRL1),
+	DUTL(PCI_PM_CTRL2),
+
+	/* PCIe stack regs */
+	DREG(SYSTEM_CONFIG1),
+	DREG(SYSTEM_CONFIG2),
+	DREG(EP_SYSTEM_CONFIG),
+	DREG(EP_FLR),
+	DREG(EP_BAR_CONFIG),
+	DREG(LINK_CONFIG),
+	DREG(PM_CONFIG),
+	DREG(DLP_CONTROL),
+	DREG(DLP_STATUS),
+	DREG(ERR_REPORT_CONTROL),
+	DREG(SLOT_CONTROL1),
+	DREG(SLOT_CONTROL2),
+	DREG(UTL_CONFIG),
+	DREG(BUFFERS_CONFIG),
+	DREG(ERROR_INJECT),
+	DREG(SRIOV_CONFIG),
+	DREG(PF0_SRIOV_STATUS),
+	DREG(PF1_SRIOV_STATUS),
+	DREG(PORT_NUMBER),
+	DREG(POR_SYSTEM_CONFIG),
+
+	/* Internal logic regs */
+	DREG(PHB_VERSION),
+	DREG(RESET),
+	DREG(PHB_CONTROL),
+	DREG(PHB_TIMEOUT_CONTROL1),
+	DREG(PHB_QUIESCE_DMA),
+	DREG(PHB_DMA_READ_TAG_ACTV),
+	DREG(PHB_TCE_READ_TAG_ACTV),
+
+	/* FIR registers */
+	DREG(LEM_FIR_ACCUM),
+	DREG(LEM_FIR_AND_MASK),
+	DREG(LEM_FIR_OR_MASK),
+	DREG(LEM_ACTION0),
+	DREG(LEM_ACTION1),
+	DREG(LEM_ERROR_MASK),
+	DREG(LEM_ERROR_AND_MASK),
+	DREG(LEM_ERROR_OR_MASK),
+
+	/* Error traps registers */
+	DREG(PHB_ERR_STATUS),
+	DREG(PHB_ERR_STATUS),
+	DREG(PHB_ERR1_STATUS),
+	DREG(PHB_ERR_INJECT),
+	DREG(PHB_ERR_LEM_ENABLE),
+	DREG(PHB_ERR_IRQ_ENABLE),
+	DREG(PHB_ERR_FREEZE_ENABLE),
+	DREG(PHB_ERR_SIDE_ENABLE),
+	DREG(PHB_ERR_LOG_0),
+	DREG(PHB_ERR_LOG_1),
+	DREG(PHB_ERR_STATUS_MASK),
+	DREG(PHB_ERR1_STATUS_MASK),
+	DREG(MMIO_ERR_STATUS),
+	DREG(MMIO_ERR1_STATUS),
+	DREG(MMIO_ERR_INJECT),
+	DREG(MMIO_ERR_LEM_ENABLE),
+	DREG(MMIO_ERR_IRQ_ENABLE),
+	DREG(MMIO_ERR_FREEZE_ENABLE),
+	DREG(MMIO_ERR_SIDE_ENABLE),
+	DREG(MMIO_ERR_LOG_0),
+	DREG(MMIO_ERR_LOG_1),
+	DREG(MMIO_ERR_STATUS_MASK),
+	DREG(MMIO_ERR1_STATUS_MASK),
+	DREG(DMA_ERR_STATUS),
+	DREG(DMA_ERR1_STATUS),
+	DREG(DMA_ERR_INJECT),
+	DREG(DMA_ERR_LEM_ENABLE),
+	DREG(DMA_ERR_IRQ_ENABLE),
+	DREG(DMA_ERR_FREEZE_ENABLE),
+	DREG(DMA_ERR_SIDE_ENABLE),
+	DREG(DMA_ERR_LOG_0),
+	DREG(DMA_ERR_LOG_1),
+	DREG(DMA_ERR_STATUS_MASK),
+	DREG(DMA_ERR1_STATUS_MASK),
+
+	/* Debug and Trace registers */
+	DREG(PHB_DEBUG_CONTROL0),
+	DREG(PHB_DEBUG_STATUS0),
+	DREG(PHB_DEBUG_CONTROL1),
+	DREG(PHB_DEBUG_STATUS1),
+	DREG(PHB_DEBUG_CONTROL2),
+	DREG(PHB_DEBUG_STATUS2),
+	DREG(PHB_DEBUG_CONTROL3),
+	DREG(PHB_DEBUG_STATUS3),
+	DREG(PHB_DEBUG_CONTROL4),
+	DREG(PHB_DEBUG_STATUS4),
+	DREG(PHB_DEBUG_CONTROL5),
+	DREG(PHB_DEBUG_STATUS5),
+
+	/* Don't seem to exist ...
+	DREG(PHB_DEBUG_CONTROL6),
+	DREG(PHB_DEBUG_STATUS6),
+	*/
+};
+
+static int wsp_pci_regs_show(struct seq_file *m, void *private)
+{
+	struct wsp_phb *phb = m->private;
+	struct pci_controller *hose = phb->hose;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+		/* Skip write-only regs */
+		if (wsp_pci_regs[i].offset == 0xc08 ||
+		    wsp_pci_regs[i].offset == 0xc10 ||
+		    wsp_pci_regs[i].offset == 0xc38 ||
+		    wsp_pci_regs[i].offset == 0xc40)
+			continue;
+		seq_printf(m, "0x%03x: 0x%016llx %s\n",
+			   wsp_pci_regs[i].offset,
+			   in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
+			   wsp_pci_regs[i].name);
+	}
+	return 0;
+}
+
+static int wsp_pci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, wsp_pci_regs_show, inode->i_private);
+}
+
+static const struct file_operations wsp_pci_regs_fops = {
+	.open = wsp_pci_regs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int wsp_pci_reg_set(void *data, u64 val)
+{
+	out_be64((void __iomem *)data, val);
+	return 0;
+}
+
+static int wsp_pci_reg_get(void *data, u64 *val)
+{
+	*val = in_be64((void __iomem *)data);
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
+
+static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
+{
+	struct wsp_phb *phb = dev_id;
+	struct pci_controller *hose = phb->hose;
+	irqreturn_t handled = IRQ_NONE;
+	struct wsp_pcie_err_log_data ed;
+
+	pr_err("PCI: Error interrupt on %s (PHB %d)\n",
+	       hose->dn->full_name, hose->global_number);
+ again:
+	memset(&ed, 0, sizeof(ed));
+
+	/* Read and clear UTL errors */
+	ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
+	if (ed.utl_sys_err)
+		out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
+	ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
+	if (ed.utl_port_err)
+		out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
+	ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
+	if (ed.utl_rc_err)
+		out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
+
+	/* Read and clear main trap errors */
+	ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
+	if (ed.phb_err) {
+		ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
+		ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
+		ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
+		out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
+		out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
+	}
+	ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
+	if (ed.mmio_err) {
+		ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
+		ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
+		ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
+		out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
+		out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
+	}
+	ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
+	if (ed.dma_err) {
+		ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
+		ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
+		ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
+		out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
+		out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
+	}
+
+	/* Now print things out */
+	if (ed.phb_err) {
+		pr_err("   PHB Error Status      : 0x%016llx\n", ed.phb_err);
+		pr_err("   PHB First Error Status: 0x%016llx\n", ed.phb_err1);
+		pr_err("   PHB Error Log 0       : 0x%016llx\n", ed.phb_log0);
+		pr_err("   PHB Error Log 1       : 0x%016llx\n", ed.phb_log1);
+	}
+	if (ed.mmio_err) {
+		pr_err("  MMIO Error Status      : 0x%016llx\n", ed.mmio_err);
+		pr_err("  MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
+		pr_err("  MMIO Error Log 0       : 0x%016llx\n", ed.mmio_log0);
+		pr_err("  MMIO Error Log 1       : 0x%016llx\n", ed.mmio_log1);
+	}
+	if (ed.dma_err) {
+		pr_err("   DMA Error Status      : 0x%016llx\n", ed.dma_err);
+		pr_err("   DMA First Error Status: 0x%016llx\n", ed.dma_err1);
+		pr_err("   DMA Error Log 0       : 0x%016llx\n", ed.dma_log0);
+		pr_err("   DMA Error Log 1       : 0x%016llx\n", ed.dma_log1);
+	}
+	if (ed.utl_sys_err)
+		pr_err("   UTL Sys Error Status  : 0x%016llx\n", ed.utl_sys_err);
+	if (ed.utl_port_err)
+		pr_err("   UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
+	if (ed.utl_rc_err)
+		pr_err("   UTL RC Error Status   : 0x%016llx\n", ed.utl_rc_err);
+
+	/* Interrupts are caused by the error traps. If we had any error there
+	 * we loop again in case the UTL buffered some new stuff between
+	 * going there and going to the traps
+	 */
+	if (ed.dma_err || ed.mmio_err || ed.phb_err) {
+		handled = IRQ_HANDLED;
+		goto again;
+	}
+	return handled;
+}
+
+static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
+{
+	struct pci_controller *hose = phb->hose;
+	int err_irq, i, rc;
+	char fname[16];
+
+	/* Create a debugfs file for that PHB */
+	sprintf(fname, "phb%d", phb->hose->global_number);
+	phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
+
+	/* Some useful debug output */
+	if (phb->ddir) {
+		struct dentry *d = debugfs_create_dir("regs", phb->ddir);
+		char tmp[64];
+
+		for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+			sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
+				wsp_pci_regs[i].name);
+			debugfs_create_file(tmp, 0600, d,
+					    hose->cfg_data + wsp_pci_regs[i].offset,
+					    &wsp_pci_reg_fops);
+		}
+		debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
+	}
+
+	/* Find the IRQ number for that PHB */
+	err_irq = irq_of_parse_and_map(hose->dn, 0);
+	if (err_irq == 0)
+		/* XXX Error IRQ lacking from device-tree */
+		err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
+	if (err_irq == 0) {
+		pr_err("PCI: Failed to fetch error interrupt for %s\n",
+		       hose->dn->full_name);
+		return;
+	}
+	/* Request it */
+	rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
+	if (rc) {
+		pr_err("PCI: Failed to request interrupt for %s\n",
+		       hose->dn->full_name);
+	}
+	/* Enable interrupts for all errors for now */
+	out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+	out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+	out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+}
+
+/*
+ * This is called later to hookup with the error interrupt
+ */
+static int __init wsp_setup_pci_late(void)
+{
+	struct wsp_phb *phb;
+
+	list_for_each_entry(phb, &wsp_phbs, all)
+		wsp_setup_pci_err_reporting(phb);
+
+	return 0;
+}
+arch_initcall(wsp_setup_pci_late);
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.h b/arch/powerpc/platforms/wsp/wsp_pci.h
new file mode 100644
index 0000000..52e9bd9
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp_pci.h
@@ -0,0 +1,268 @@
+/*
+ * Copyright 2010 Ben Herrenschmidt, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __WSP_PCI_H
+#define __WSP_PCI_H
+
+/* Architected registers */
+#define PCIE_REG_DMA_CHAN_STATUS	0x110
+#define PCIE_REG_CPU_LOADSTORE_STATUS	0x120
+
+#define PCIE_REG_CONFIG_DATA		0x130
+#define PCIE_REG_LOCK0			0x138
+#define PCIE_REG_CONFIG_ADDRESS		0x140
+#define   PCIE_REG_CA_ENABLE			0x8000000000000000ull
+#define	  PCIE_REG_CA_BUS_MASK			0x0ff0000000000000ull
+#define   PCIE_REG_CA_BUS_SHIFT			(20+32)
+#define   PCIE_REG_CA_DEV_MASK			0x000f800000000000ull
+#define   PCIE_REG_CA_DEV_SHIFT			(15+32)
+#define   PCIE_REG_CA_FUNC_MASK			0x0000700000000000ull
+#define   PCIE_REG_CA_FUNC_SHIFT		(12+32)
+#define   PCIE_REG_CA_REG_MASK			0x00000fff00000000ull
+#define   PCIE_REG_CA_REG_SHIFT			( 0+32)
+#define   PCIE_REG_CA_BE_MASK			0x00000000f0000000ull
+#define   PCIE_REG_CA_BE_SHIFT			(   28)
+#define PCIE_REG_LOCK1			0x148
+
+#define PCIE_REG_PHB_CONFIG		0x160
+#define   PCIE_REG_PHBC_64B_TCE_EN		0x2000000000000000ull
+#define   PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN	0x1000000000000000ull
+#define   PCIE_REG_PHBC_32BIT_MSI_EN		0x0080000000000000ull
+#define   PCIE_REG_PHBC_M64_EN			0x0040000000000000ull
+#define   PCIE_REG_PHBC_IO_EN			0x0008000000000000ull
+#define   PCIE_REG_PHBC_64BIT_MSI_EN		0x0002000000000000ull
+#define   PCIE_REG_PHBC_M32A_EN			0x0000800000000000ull
+#define   PCIE_REG_PHBC_M32B_EN			0x0000400000000000ull
+#define   PCIE_REG_PHBC_MSI_PE_VALIDATE		0x0000200000000000ull
+#define   PCIE_REG_PHBC_DMA_XLATE_BYPASS	0x0000100000000000ull
+
+#define PCIE_REG_IO_BASE_ADDR		0x170
+#define PCIE_REG_IO_BASE_MASK		0x178
+#define PCIE_REG_IO_START_ADDR		0x180
+
+#define PCIE_REG_M32A_BASE_ADDR		0x190
+#define PCIE_REG_M32A_BASE_MASK		0x198
+#define PCIE_REG_M32A_START_ADDR	0x1a0
+
+#define PCIE_REG_M32B_BASE_ADDR		0x1b0
+#define PCIE_REG_M32B_BASE_MASK		0x1b8
+#define PCIE_REG_M32B_START_ADDR	0x1c0
+
+#define PCIE_REG_M64_BASE_ADDR		0x1e0
+#define PCIE_REG_M64_BASE_MASK		0x1e8
+#define PCIE_REG_M64_START_ADDR		0x1f0
+
+#define PCIE_REG_TCE_KILL		0x210
+#define   PCIE_REG_TCEKILL_SINGLE	0x8000000000000000ull
+#define   PCIE_REG_TCEKILL_ADDR_MASK	0x000003fffffffff8ull
+#define   PCIE_REG_TCEKILL_PS_4K	0
+#define   PCIE_REG_TCEKILL_PS_64K	1
+#define   PCIE_REG_TCEKILL_PS_16M	2
+#define   PCIE_REG_TCEKILL_PS_16G	3
+
+#define PCIE_REG_IODA_ADDR		0x220
+#define   PCIE_REG_IODA_AD_AUTOINC	0x8000000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_MVT	0x0005000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_PELT	0x0006000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_PESTA	0x0007000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_PESTB	0x0008000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_TVT	0x0009000000000000ull
+#define   PCIE_REG_IODA_AD_TBL_TCE	0x000a000000000000ull
+#define PCIE_REG_IODA_DATA0		0x228
+#define PCIE_REG_IODA_DATA1		0x230
+
+#define PCIE_REG_LOCK2			0x240
+
+#define PCIE_REG_PHB_GEN_CAP		0x250
+#define PCIE_REG_PHB_TCE_CAP		0x258
+#define PCIE_REG_PHB_IRQ_CAP		0x260
+#define PCIE_REG_PHB_EEH_CAP		0x268
+
+#define PCIE_REG_PAPR_ERR_INJ_CONTROL	0x2b0
+#define PCIE_REG_PAPR_ERR_INJ_ADDR	0x2b8
+#define PCIE_REG_PAPR_ERR_INJ_MASK	0x2c0
+
+
+#define PCIE_REG_SYS_CFG1		0x600
+#define   PCIE_REG_SYS_CFG1_CLASS_CODE	0x0000000000ffffffull
+
+#define IODA_TVT0_TTA_MASK		0x000fffffffff0000ull
+#define IODA_TVT0_TTA_SHIFT		4
+#define IODA_TVT0_BUSNUM_VALID_MASK	0x000000000000e000ull
+#define IODA_TVT0_TCE_TABLE_SIZE_MASK	0x0000000000001f00ull
+#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT	8
+#define IODA_TVT0_BUSNUM_VALUE_MASK	0x00000000000000ffull
+#define IODA_TVT0_BUSNUM_VALID_SHIFT	0
+#define IODA_TVT1_DEVNUM_VALID		0x2000000000000000ull
+#define IODA_TVT1_DEVNUM_VALUE_MASK	0x1f00000000000000ull
+#define IODA_TVT1_DEVNUM_VALUE_SHIFT	56
+#define IODA_TVT1_FUNCNUM_VALID		0x0008000000000000ull
+#define IODA_TVT1_FUNCNUM_VALUE_MASK	0x0007000000000000ull
+#define IODA_TVT1_FUNCNUM_VALUE_SHIFT	48
+#define IODA_TVT1_IO_PAGE_SIZE_MASK	0x00001f0000000000ull
+#define IODA_TVT1_IO_PAGE_SIZE_SHIFT	40
+#define IODA_TVT1_PE_NUMBER_MASK	0x000000000000003full
+#define IODA_TVT1_PE_NUMBER_SHIFT	0
+
+#define IODA_TVT_COUNT			64
+
+/* UTL Core registers */
+#define PCIE_UTL_SYS_BUS_CONTROL	0x400
+#define PCIE_UTL_STATUS			0x408
+#define PCIE_UTL_SYS_BUS_AGENT_STATUS	0x410
+#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV	0x418
+#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN	0x420
+#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF	0x440
+#define PCIE_UTL_REVISION_ID		0x448
+
+#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC	0x4c0
+#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC	0x4d0
+#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC	0x4e0
+#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC	0x4f0
+#define PCIE_UTL_OUT_NP_BUF_ALLOC	0x500
+#define PCIE_UTL_IN_NP_BUF_ALLOC	0x510
+#define PCIE_UTL_PCIE_TAGS_ALLOC	0x520
+#define PCIE_UTL_GBIF_READ_TAGS_ALLOC	0x530
+
+#define PCIE_UTL_PCIE_PORT_CONTROL	0x540
+#define PCIE_UTL_PCIE_PORT_STATUS	0x548
+#define PCIE_UTL_PCIE_PORT_ERROR_SEV	0x550
+#define PCIE_UTL_PCIE_PORT_IRQ_EN	0x558
+#define PCIE_UTL_RC_STATUS		0x560
+#define PCIE_UTL_RC_ERR_SEVERITY	0x568
+#define PCIE_UTL_RC_IRQ_EN		0x570
+#define PCIE_UTL_EP_STATUS		0x578
+#define PCIE_UTL_EP_ERR_SEVERITY	0x580
+#define PCIE_UTL_EP_ERR_IRQ_EN		0x588
+
+#define PCIE_UTL_PCI_PM_CTRL1		0x590
+#define PCIE_UTL_PCI_PM_CTRL2		0x598
+
+/* PCIe stack registers */
+#define PCIE_REG_SYSTEM_CONFIG1		0x600
+#define PCIE_REG_SYSTEM_CONFIG2		0x608
+#define PCIE_REG_EP_SYSTEM_CONFIG	0x618
+#define PCIE_REG_EP_FLR			0x620
+#define PCIE_REG_EP_BAR_CONFIG		0x628
+#define PCIE_REG_LINK_CONFIG		0x630
+#define PCIE_REG_PM_CONFIG		0x640
+#define PCIE_REG_DLP_CONTROL		0x650
+#define PCIE_REG_DLP_STATUS		0x658
+#define PCIE_REG_ERR_REPORT_CONTROL	0x660
+#define PCIE_REG_SLOT_CONTROL1		0x670
+#define PCIE_REG_SLOT_CONTROL2		0x678
+#define PCIE_REG_UTL_CONFIG		0x680
+#define PCIE_REG_BUFFERS_CONFIG		0x690
+#define PCIE_REG_ERROR_INJECT		0x698
+#define PCIE_REG_SRIOV_CONFIG		0x6a0
+#define PCIE_REG_PF0_SRIOV_STATUS	0x6a8
+#define PCIE_REG_PF1_SRIOV_STATUS	0x6b0
+#define PCIE_REG_PORT_NUMBER		0x700
+#define PCIE_REG_POR_SYSTEM_CONFIG	0x708
+
+/* PHB internal logic registers */
+#define PCIE_REG_PHB_VERSION		0x800
+#define PCIE_REG_RESET			0x808
+#define PCIE_REG_PHB_CONTROL		0x810
+#define PCIE_REG_PHB_TIMEOUT_CONTROL1	0x878
+#define PCIE_REG_PHB_QUIESCE_DMA	0x888
+#define PCIE_REG_PHB_DMA_READ_TAG_ACTV	0x900
+#define PCIE_REG_PHB_TCE_READ_TAG_ACTV	0x908
+
+/* FIR registers */
+#define PCIE_REG_LEM_FIR_ACCUM		0xc00
+#define PCIE_REG_LEM_FIR_AND_MASK	0xc08
+#define PCIE_REG_LEM_FIR_OR_MASK	0xc10
+#define PCIE_REG_LEM_ACTION0		0xc18
+#define PCIE_REG_LEM_ACTION1		0xc20
+#define PCIE_REG_LEM_ERROR_MASK		0xc30
+#define PCIE_REG_LEM_ERROR_AND_MASK	0xc38
+#define PCIE_REG_LEM_ERROR_OR_MASK	0xc40
+
+/* PHB Error registers */
+#define PCIE_REG_PHB_ERR_STATUS		0xc80
+#define PCIE_REG_PHB_ERR1_STATUS	0xc88
+#define PCIE_REG_PHB_ERR_INJECT		0xc90
+#define PCIE_REG_PHB_ERR_LEM_ENABLE	0xc98
+#define PCIE_REG_PHB_ERR_IRQ_ENABLE	0xca0
+#define PCIE_REG_PHB_ERR_FREEZE_ENABLE	0xca8
+#define PCIE_REG_PHB_ERR_SIDE_ENABLE	0xcb8
+#define PCIE_REG_PHB_ERR_LOG_0		0xcc0
+#define PCIE_REG_PHB_ERR_LOG_1		0xcc8
+#define PCIE_REG_PHB_ERR_STATUS_MASK	0xcd0
+#define PCIE_REG_PHB_ERR1_STATUS_MASK	0xcd8
+
+#define PCIE_REG_MMIO_ERR_STATUS	0xd00
+#define PCIE_REG_MMIO_ERR1_STATUS	0xd08
+#define PCIE_REG_MMIO_ERR_INJECT	0xd10
+#define PCIE_REG_MMIO_ERR_LEM_ENABLE	0xd18
+#define PCIE_REG_MMIO_ERR_IRQ_ENABLE	0xd20
+#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE	0xd28
+#define PCIE_REG_MMIO_ERR_SIDE_ENABLE	0xd38
+#define PCIE_REG_MMIO_ERR_LOG_0		0xd40
+#define PCIE_REG_MMIO_ERR_LOG_1		0xd48
+#define PCIE_REG_MMIO_ERR_STATUS_MASK	0xd50
+#define PCIE_REG_MMIO_ERR1_STATUS_MASK	0xd58
+
+#define PCIE_REG_DMA_ERR_STATUS		0xd80
+#define PCIE_REG_DMA_ERR1_STATUS	0xd88
+#define PCIE_REG_DMA_ERR_INJECT		0xd90
+#define PCIE_REG_DMA_ERR_LEM_ENABLE	0xd98
+#define PCIE_REG_DMA_ERR_IRQ_ENABLE	0xda0
+#define PCIE_REG_DMA_ERR_FREEZE_ENABLE	0xda8
+#define PCIE_REG_DMA_ERR_SIDE_ENABLE	0xdb8
+#define PCIE_REG_DMA_ERR_LOG_0		0xdc0
+#define PCIE_REG_DMA_ERR_LOG_1		0xdc8
+#define PCIE_REG_DMA_ERR_STATUS_MASK	0xdd0
+#define PCIE_REG_DMA_ERR1_STATUS_MASK	0xdd8
+
+/* Shortcuts for access to the above using the PHB definitions
+ * with an offset
+ */
+#define PCIE_REG_ERR_PHB_OFFSET		0x0
+#define PCIE_REG_ERR_MMIO_OFFSET	0x80
+#define PCIE_REG_ERR_DMA_OFFSET		0x100
+
+/* Debug and Trace registers */
+#define PCIE_REG_PHB_DEBUG_CONTROL0	0xe00
+#define PCIE_REG_PHB_DEBUG_STATUS0	0xe08
+#define PCIE_REG_PHB_DEBUG_CONTROL1	0xe10
+#define PCIE_REG_PHB_DEBUG_STATUS1	0xe18
+#define PCIE_REG_PHB_DEBUG_CONTROL2	0xe20
+#define PCIE_REG_PHB_DEBUG_STATUS2	0xe28
+#define PCIE_REG_PHB_DEBUG_CONTROL3	0xe30
+#define PCIE_REG_PHB_DEBUG_STATUS3	0xe38
+#define PCIE_REG_PHB_DEBUG_CONTROL4	0xe40
+#define PCIE_REG_PHB_DEBUG_STATUS4	0xe48
+#define PCIE_REG_PHB_DEBUG_CONTROL5	0xe50
+#define PCIE_REG_PHB_DEBUG_STATUS5	0xe58
+#define PCIE_REG_PHB_DEBUG_CONTROL6	0xe60
+#define PCIE_REG_PHB_DEBUG_STATUS6	0xe68
+
+/* Definition for PCIe errors */
+struct wsp_pcie_err_log_data {
+	__u64	phb_err;
+	__u64	phb_err1;
+	__u64	phb_log0;
+	__u64	phb_log1;
+	__u64	mmio_err;
+	__u64	mmio_err1;
+	__u64	mmio_log0;
+	__u64	mmio_log1;
+	__u64	dma_err;
+	__u64	dma_err1;
+	__u64	dma_log0;
+	__u64	dma_log1;
+	__u64	utl_sys_err;
+	__u64	utl_port_err;
+	__u64	utl_rc_err;
+	__u64	unused;
+};
+
+#endif /* __WSP_PCI_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cf736ca..84e1325 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -18,7 +18,6 @@
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
-obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
 obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
 obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 265f0f0..ba42719 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -104,7 +104,7 @@
  * axon_ram_make_request - make_request() method for block device
  * @queue, @bio: see blk_queue_make_request()
  */
-static int
+static void
 axon_ram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct axon_ram_bank *bank = bio->bi_bdev->bd_disk->private_data;
@@ -113,7 +113,6 @@
 	struct bio_vec *vec;
 	unsigned int transfered;
 	unsigned short idx;
-	int rc = 0;
 
 	phys_mem = bank->io_addr + (bio->bi_sector << AXON_RAM_SECTOR_SHIFT);
 	phys_end = bank->io_addr + bank->size;
@@ -121,8 +120,7 @@
 	bio_for_each_segment(vec, bio, idx) {
 		if (unlikely(phys_mem + vec->bv_len > phys_end)) {
 			bio_io_error(bio);
-			rc = -ERANGE;
-			break;
+			return;
 		}
 
 		user_mem = page_address(vec->bv_page) + vec->bv_offset;
@@ -135,8 +133,6 @@
 		transfered += vec->bv_len;
 	}
 	bio_endio(bio, 0);
-
-	return rc;
 }
 
 /**
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 1225012..b6db23e 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -13,7 +13,7 @@
 
 #include <linux/err.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index d55d0ad..bf6c7cc 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -3,7 +3,7 @@
  *
  * Author: Scott Wood <scottwood@freescale.com>
  *
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
  *
  * Some parts derived from commproc.c/cpm2_common.c, which is:
  * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/of_device.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 
@@ -146,6 +147,7 @@
 	spin_lock_irqsave(&cpm_muram_lock, flags);
 	cpm_muram_info.alignment = align;
 	start = rh_alloc(&cpm_muram_info, size, "commproc");
+	memset(cpm_muram_addr(start), 0, size);
 	spin_unlock_irqrestore(&cpm_muram_lock, flags);
 
 	return start;
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index bb44aa9..1bd0eba 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -20,6 +20,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <asm/prom.h>
 #include <asm/dcr.h>
 
diff --git a/arch/powerpc/sysdev/ehv_pic.c b/arch/powerpc/sysdev/ehv_pic.c
index af1a5df..b6731e4 100644
--- a/arch/powerpc/sysdev/ehv_pic.c
+++ b/arch/powerpc/sysdev/ehv_pic.c
@@ -280,6 +280,7 @@
 
 	if (!ehv_pic->irqhost) {
 		of_node_put(np);
+		kfree(ehv_pic);
 		return;
 	}
 
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 7dd2885..02cf1e7 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -22,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/fsl_gtm.h>
 
 #define GTCFR_STP(x)		((x) & 1 ? 1 << 5 : 1 << 1)
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index d917573..d5c3c90 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -15,7 +15,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/compiler.h>
 #include <linux/spinlock.h>
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/slab.h>
+#include <linux/sched.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/mod_devicetable.h>
@@ -327,6 +328,7 @@
 err:
 	iounmap(fsl_lbc_ctrl_dev->regs);
 	kfree(fsl_lbc_ctrl_dev);
+	fsl_lbc_ctrl_dev = NULL;
 	return ret;
 }
 
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 419a772..e5c344d 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -30,7 +30,7 @@
 
 struct fsl_msi_feature {
 	u32 fsl_pic_ip;
-	u32 msiir_offset;
+	u32 msiir_offset; /* Offset of MSIIR, relative to start of MSIR bank */
 };
 
 struct fsl_msi_cascade_data {
@@ -126,10 +126,19 @@
 {
 	struct fsl_msi *msi_data = fsl_msi_data;
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	u64 base = fsl_pci_immrbar_base(hose);
+	u64 address; /* Physical address of the MSIIR */
+	int len;
+	const u64 *reg;
 
-	msg->address_lo = msi_data->msi_addr_lo + lower_32_bits(base);
-	msg->address_hi = msi_data->msi_addr_hi + upper_32_bits(base);
+	/* If the msi-address-64 property exists, then use it */
+	reg = of_get_property(hose->dn, "msi-address-64", &len);
+	if (reg && (len == sizeof(u64)))
+		address = be64_to_cpup(reg);
+	else
+		address = fsl_pci_immrbar_base(hose) + msi_data->msiir_offset;
+
+	msg->address_lo = lower_32_bits(address);
+	msg->address_hi = upper_32_bits(address);
 
 	msg->data = hwirq;
 
@@ -296,7 +305,7 @@
 	}
 
 	msi->msi_virqs[irq_index] = virt_msir;
-	cascade_data->index = offset + irq_index;
+	cascade_data->index = offset;
 	cascade_data->msi_data = msi;
 	irq_set_handler_data(virt_msir, cascade_data);
 	irq_set_chained_handler(virt_msir, fsl_msi_cascade);
@@ -359,8 +368,7 @@
 
 	msi->irqhost->host_data = msi;
 
-	msi->msi_addr_hi = 0x0;
-	msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
+	msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
 
 	rc = fsl_msi_init_allocator(msi);
 	if (rc) {
@@ -376,8 +384,10 @@
 		goto error_out;
 	}
 
-	if (!p)
+	if (!p) {
 		p = all_avail;
+		len = sizeof(all_avail);
+	}
 
 	for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
 		if (p[i * 2] % IRQS_PER_MSI_REG ||
@@ -393,7 +403,7 @@
 		count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
 
 		for (j = 0; j < count; j++, irq_index++) {
-			err = fsl_msi_setup_hwirq(msi, dev, offset, irq_index);
+			err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index);
 			if (err)
 				goto error_out;
 		}
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 624580c..1313abb 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -28,8 +28,7 @@
 
 	unsigned long cascade_irq;
 
-	u32 msi_addr_lo;
-	u32 msi_addr_hi;
+	u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
 	void __iomem *msi_regs;
 	u32 feature;
 	int msi_virqs[NR_MSI_REG];
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index f122e89..592a0f8 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/delay.h>
 #include <linux/device.h>
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 2d66275..e8f385f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -19,7 +19,7 @@
 #include <linux/major.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index 34e12f9..96f815a 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -8,6 +8,7 @@
 
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/export.h>
 
 unsigned int
 mpc5xxx_get_bus_frequency(struct device_node *node)
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 22e48e2d..2ca0a85 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -1,5 +1,4 @@
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/sched.h>
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index d5d3ff3..8c7e852 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -800,8 +800,6 @@
 	 * IPIs are marked IRQ_PER_CPU. This has the side effect of
 	 * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
 	 * applying to them. We EOI them late to avoid re-entering.
-	 * We mark IPI's with IRQF_DISABLED as they must run with
-	 * irqs disabled.
 	 */
 	mpic_eoi(mpic);
 }
@@ -1285,13 +1283,11 @@
 			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
 			   | MPIC_GREG_GCONF_MCK);
 
-	/* Read feature register, calculate num CPUs and, for non-ISU
-	 * MPICs, num sources as well. On ISU MPICs, sources are counted
-	 * as ISUs are added
+	/*
+	 * Read feature register.  For non-ISU MPICs, num sources as well. On
+	 * ISU MPICs, sources are counted as ISUs are added
 	 */
 	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
-	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
-			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
 	if (isu_size == 0) {
 		if (flags & MPIC_BROKEN_FRR_NIRQS)
 			mpic->num_sources = mpic->irq_count;
@@ -1301,10 +1297,18 @@
 				 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
 	}
 
+	/*
+	 * The MPIC driver will crash if there are more cores than we
+	 * can initialize, so we may as well catch that problem here.
+	 */
+	BUG_ON(num_possible_cpus() > MPIC_MAX_CPUS);
+
 	/* Map the per-CPU registers */
-	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
-			 MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
+	for_each_possible_cpu(i) {
+		unsigned int cpu = get_hard_smp_processor_id(i);
+
+		mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu],
+			 MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
 
@@ -1343,7 +1347,7 @@
 	}
 	printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
 	       " max %d CPUs\n",
-	       name, vers, (unsigned long long)paddr, mpic->num_cpus);
+	       name, vers, (unsigned long long)paddr, num_possible_cpus());
 	printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
 	       mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
 
@@ -1742,6 +1746,7 @@
 	struct mpic *mpic = mpic_primary;
 	u32 pir;
 	int cpuid = get_hard_smp_processor_id(cpu);
+	int i;
 
 	/* Set target bit for core reset */
 	pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
@@ -1753,6 +1758,15 @@
 	pir &= ~(1 << cpuid);
 	mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir);
 	mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
+
+	/* Perform 15 EOI on each reset core to clear pending interrupts.
+	 * This is required for FSL CoreNet based devices */
+	if (mpic->flags & MPIC_FSL) {
+		for (i = 0; i < 15; i++) {
+			_mpic_write(mpic->reg_type, &mpic->cpuregs[cpuid],
+				      MPIC_CPU_EOI, 0);
+		}
+	}
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 77bb3f4..b0037ce 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -12,6 +12,7 @@
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/stat.h>
 #include <linux/pci.h>
 
 #include <asm/prom.h>
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index 8ce4fc3..8f04654 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include <linux/workqueue.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
index 367af02..1c2d7af 100644
--- a/arch/powerpc/sysdev/ppc4xx_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_msi.c
@@ -27,6 +27,7 @@
 #include <linux/msi.h>
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index dbfe96b..862f11b 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -834,7 +834,7 @@
 	return 3;
 }
 
-static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 	u32 val = 1 << 24;
 
@@ -872,12 +872,12 @@
 	return ppc4xx_pciex_port_reset_sdr(port);
 }
 
-static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 	return ppc440spe_pciex_init_port_hw(port);
 }
 
-static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 	int rc = ppc440spe_pciex_init_port_hw(port);
 
@@ -936,7 +936,7 @@
 	return 2;
 }
 
-static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 	u32 val;
 	u32 utlset1;
@@ -1092,6 +1092,10 @@
 	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
 	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
 
+	/* Set HSS PRBS enabled */
+	mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+	mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
 	udelay(100);
 
 	/* De-assert PLLRESET */
@@ -1122,7 +1126,7 @@
 	return 2;
 }
 
-static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 
 	if (port->endpoint)
@@ -1132,9 +1136,6 @@
 		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
 				0, 0x01000000);
 
-	/*Gen-1*/
-	mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
-
 	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
 			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
 			PESDRx_RCSSET_RSTPYN);
@@ -1148,14 +1149,42 @@
 {
 	/* Max 128 Bytes */
 	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	/* Assert VRB and TXE - per datasheet turn off addr validation */
+	out_be32(port->utl_base + PEUTL_PCTL,  0x80800000);
 	return 0;
 }
 
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	void __iomem *mbase;
+	int attempt = 50;
+
+	port->link = 0;
+
+	mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+	if (mbase == NULL) {
+		printk(KERN_ERR "%s: Can't map internal config space !",
+			port->node->full_name);
+		goto done;
+	}
+
+	while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+			& PECFG_460SX_DLLSTA_LINKUP))) {
+		attempt--;
+		mdelay(10);
+	}
+	if (attempt)
+		port->link = 1;
+done:
+	iounmap(mbase);
+
+}
+
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
 	.core_init	= ppc460sx_pciex_core_init,
 	.port_init_hw	= ppc460sx_pciex_init_port_hw,
 	.setup_utl	= ppc460sx_pciex_init_utl,
-	.check_link	= ppc4xx_pciex_check_link_sdr,
+	.check_link	= ppc460sx_pciex_check_link,
 };
 
 #endif /* CONFIG_44x */
@@ -1189,7 +1218,7 @@
 	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
 }
 
-static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 {
 	u32 val;
 
@@ -1338,15 +1367,15 @@
 	if (rc != 0)
 		return rc;
 
-	if (ppc4xx_pciex_hwops->check_link)
-		ppc4xx_pciex_hwops->check_link(port);
-
 	/*
 	 * Initialize mapping: disable all regions and configure
 	 * CFG and REG regions based on resources in the device tree
 	 */
 	ppc4xx_pciex_port_init_mapping(port);
 
+	if (ppc4xx_pciex_hwops->check_link)
+		ppc4xx_pciex_hwops->check_link(port);
+
 	/*
 	 * Map UTL
 	 */
@@ -1360,13 +1389,23 @@
 		ppc4xx_pciex_hwops->setup_utl(port);
 
 	/*
-	 * Check for VC0 active and assert RDY.
+	 * Check for VC0 active or PLL Locked and assert RDY.
 	 */
 	if (port->sdr_base) {
-		if (port->link &&
-		    ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
-					     1 << 16, 1 << 16, 5000)) {
-			printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+		if (of_device_is_compatible(port->node,
+				"ibm,plb-pciex-460sx")){
+			if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+					PESDRn_RCSSTS,
+					1 << 12, 1 << 12, 5000)) {
+				printk(KERN_INFO "PCIE%d: PLL not locked\n",
+						port->index);
+				port->link = 0;
+			}
+		} else if (port->link &&
+			ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+				1 << 16, 1 << 16, 5000)) {
+			printk(KERN_INFO "PCIE%d: VC0 not active\n",
+					port->index);
 			port->link = 0;
 		}
 
@@ -1573,8 +1612,15 @@
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
-		/* Note that 3 here means enabled | single region */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+		/*Enabled and single region */
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	case 1:
 		out_le32(mbase + PECFG_POM1LAH, pciah);
@@ -1582,8 +1628,8 @@
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
-		/* Note that 3 here means enabled | single region */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+				sa | DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	case 2:
 		out_le32(mbase + PECFG_POM2LAH, pciah);
@@ -1592,7 +1638,9 @@
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
 		/* Note that 3 here means enabled | IO space !!! */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+				sa | DCRO_PEGPL_OMR3MSKL_IO
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	}
 
@@ -1693,6 +1741,9 @@
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
 		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
 
@@ -1854,6 +1905,10 @@
 	}
 	out_le16(mbase + 0x202, val);
 
+	/* Enable Bus master, memory, and io space */
+	if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+		out_le16(mbase + 0x204, 0x7);
+
 	if (!port->endpoint) {
 		/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
 		out_le32(mbase + 0x208, 0x06040001);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index c39a134..32ce763 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -464,6 +464,18 @@
 #define PECFG_POM2LAL		0x390
 #define PECFG_POM2LAH		0x394
 
+/* 460sx only */
+#define PECFG_460SX_DLLSTA     0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP	 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT	 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL	 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT	 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO	 0x00000002
+
 /* SDR Bit Mappings */
 #define PESDRx_RCSSET_HLDPLB	0x10000000
 #define PESDRx_RCSSET_RSTGU	0x01000000
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index d3d6ce3..0debcc3 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -115,7 +115,7 @@
 	}
 
 	/* Install error handler */
-	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+	if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
 		printk(KERN_ERR "Cannot install L2C error handler"
 		       ", cache is not enabled\n");
 		of_node_put(np);
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 36bf845..e23f23c 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -20,6 +20,7 @@
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/qe.h>
 
 struct qe_gpio_chip {
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 3363fbc..ceb09cb 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -216,7 +216,7 @@
 	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
 	   that the BRG divisor must be even if you're not using divide-by-16
 	   mode. */
-	if (!div16 && (divisor & 1))
+	if (!div16 && (divisor & 1) && (divisor > 3))
 		divisor++;
 
 	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index fa589b2..0467750 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -18,7 +18,7 @@
 #include <linux/errno.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 25fbbfa..fba0244 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -19,7 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/io.h>
 #include <asm/immap_qe.h>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index e1d6a13..524c0ea 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -19,7 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/io.h>
 #include <asm/immap_qe.h>
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
index 8105462..9162828 100644
--- a/arch/powerpc/sysdev/qe_lib/usb.c
+++ b/arch/powerpc/sysdev/qe_lib/usb.c
@@ -15,6 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <asm/immap_qe.h>
 #include <asm/qe.h>
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c1879eb..9afba92 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/mc146818rtc.h>
 
 #include <asm/prom.h>
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index b2593ce..49a3ece 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
 
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
index b6defda..ff5e732 100644
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 9f51f97..2370e1c 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -16,7 +16,7 @@
 #include <linux/major.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/of_net.h>
diff --git a/arch/powerpc/sysdev/xics/Makefile b/arch/powerpc/sysdev/xics/Makefile
index b75a605..c606aa8 100644
--- a/arch/powerpc/sysdev/xics/Makefile
+++ b/arch/powerpc/sysdev/xics/Makefile
@@ -4,3 +4,4 @@
 obj-$(CONFIG_PPC_ICP_NATIVE)	+= icp-native.o
 obj-$(CONFIG_PPC_ICP_HV)	+= icp-hv.o
 obj-$(CONFIG_PPC_ICS_RTAS)	+= ics-rtas.o
+obj-$(CONFIG_PPC_POWERNV)	+= ics-opal.o
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index 50e32af..4c79b6f 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -276,7 +276,7 @@
 #endif
 };
 
-int icp_native_init(void)
+int __init icp_native_init(void)
 {
 	struct device_node *np;
 	u32 indx = 0;
diff --git a/arch/powerpc/sysdev/xics/ics-opal.c b/arch/powerpc/sysdev/xics/ics-opal.c
new file mode 100644
index 0000000..f7e8609
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/ics-opal.c
@@ -0,0 +1,244 @@
+/*
+ * ICS backend for OPAL managed interrupts.
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/msi.h>
+
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static int ics_opal_mangle_server(int server)
+{
+	/* No link for now */
+	return server << 2;
+}
+
+static int ics_opal_unmangle_server(int server)
+{
+	/* No link for now */
+	return server >> 2;
+}
+
+static void ics_opal_unmask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	int64_t rc;
+	int server;
+
+	pr_devel("ics-hal: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+
+	server = xics_get_irq_server(d->irq, d->affinity, 0);
+	server = ics_opal_mangle_server(server);
+
+	rc = opal_set_xive(hw_irq, server, DEFAULT_PRIORITY);
+	if (rc != OPAL_SUCCESS)
+		pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+		       " error %lld\n",
+		       __func__, d->irq, hw_irq, server, rc);
+}
+
+static unsigned int ics_opal_startup(struct irq_data *d)
+{
+#ifdef CONFIG_PCI_MSI
+	/*
+	 * The generic MSI code returns with the interrupt disabled on the
+	 * card, using the MSI mask bits. Firmware doesn't appear to unmask
+	 * at that level, so we do it here by hand.
+	 */
+	if (d->msi_desc)
+		unmask_msi_irq(d);
+#endif
+
+	/* unmask it */
+	ics_opal_unmask_irq(d);
+	return 0;
+}
+
+static void ics_opal_mask_real_irq(unsigned int hw_irq)
+{
+	int server = ics_opal_mangle_server(xics_default_server);
+	int64_t rc;
+
+	if (hw_irq == XICS_IPI)
+		return;
+
+	/* Have to set XIVE to 0xff to be able to remove a slot */
+	rc = opal_set_xive(hw_irq, server, 0xff);
+	if (rc != OPAL_SUCCESS)
+		pr_err("%s: opal_set_xive(0xff) irq=%u returned %lld\n",
+		       __func__, hw_irq, rc);
+}
+
+static void ics_opal_mask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+	pr_devel("ics-hal: mask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+	ics_opal_mask_real_irq(hw_irq);
+}
+
+static int ics_opal_set_affinity(struct irq_data *d,
+				 const struct cpumask *cpumask,
+				 bool force)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	int16_t server;
+	int8_t priority;
+	int64_t rc;
+	int wanted_server;
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return -1;
+
+	rc = opal_get_xive(hw_irq, &server, &priority);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+		       " error %lld\n",
+		       __func__, d->irq, hw_irq, server, rc);
+		return -1;
+	}
+
+	wanted_server = xics_get_irq_server(d->irq, cpumask, 1);
+	if (wanted_server < 0) {
+		char cpulist[128];
+		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+		pr_warning("%s: No online cpus in the mask %s for irq %d\n",
+			   __func__, cpulist, d->irq);
+		return -1;
+	}
+	server = ics_opal_mangle_server(wanted_server);
+
+	pr_devel("ics-hal: set-affinity irq %d [hw 0x%x] server: 0x%x/0x%x\n",
+		 d->irq, hw_irq, wanted_server, server);
+
+	rc = opal_set_xive(hw_irq, server, priority);
+	if (rc != OPAL_SUCCESS) {
+		pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"
+		       " error %lld\n",
+		       __func__, d->irq, hw_irq, server, rc);
+		return -1;
+	}
+	return 0;
+}
+
+static struct irq_chip ics_opal_irq_chip = {
+	.name = "OPAL ICS",
+	.irq_startup = ics_opal_startup,
+	.irq_mask = ics_opal_mask_irq,
+	.irq_unmask = ics_opal_unmask_irq,
+	.irq_eoi = NULL, /* Patched at init time */
+	.irq_set_affinity = ics_opal_set_affinity
+};
+
+static int ics_opal_map(struct ics *ics, unsigned int virq);
+static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec);
+static long ics_opal_get_server(struct ics *ics, unsigned long vec);
+
+static int ics_opal_host_match(struct ics *ics, struct device_node *node)
+{
+	return 1;
+}
+
+/* Only one global & state struct ics */
+static struct ics ics_hal = {
+	.map		= ics_opal_map,
+	.mask_unknown	= ics_opal_mask_unknown,
+	.get_server	= ics_opal_get_server,
+	.host_match	= ics_opal_host_match,
+};
+
+static int ics_opal_map(struct ics *ics, unsigned int virq)
+{
+	unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
+	int64_t rc;
+	int16_t server;
+	int8_t priority;
+
+	if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
+		return -EINVAL;
+
+	/* Check if HAL knows about this interrupt */
+	rc = opal_get_xive(hw_irq, &server, &priority);
+	if (rc != OPAL_SUCCESS)
+		return -ENXIO;
+
+	irq_set_chip_and_handler(virq, &ics_opal_irq_chip, handle_fasteoi_irq);
+	irq_set_chip_data(virq, &ics_hal);
+
+	return 0;
+}
+
+static void ics_opal_mask_unknown(struct ics *ics, unsigned long vec)
+{
+	int64_t rc;
+	int16_t server;
+	int8_t priority;
+
+	/* Check if HAL knows about this interrupt */
+	rc = opal_get_xive(vec, &server, &priority);
+	if (rc != OPAL_SUCCESS)
+		return;
+
+	ics_opal_mask_real_irq(vec);
+}
+
+static long ics_opal_get_server(struct ics *ics, unsigned long vec)
+{
+	int64_t rc;
+	int16_t server;
+	int8_t priority;
+
+	/* Check if HAL knows about this interrupt */
+	rc = opal_get_xive(vec, &server, &priority);
+	if (rc != OPAL_SUCCESS)
+		return -1;
+	return ics_opal_unmangle_server(server);
+}
+
+int __init ics_opal_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	/* We need to patch our irq chip's EOI to point to the
+	 * right ICP
+	 */
+	ics_opal_irq_chip.irq_eoi = icp_ops->eoi;
+
+	/* Register ourselves */
+	xics_register_ics(&ics_hal);
+
+	pr_info("ICS OPAL backend registered\n");
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 445c5a0..63762c6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -134,11 +134,10 @@
 	BUG_ON(ipi == NO_IRQ);
 
 	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled, and PERCPU.  The handler was set in map.
+	 * IPIs are marked IRQF_PERCPU. The handler was set in map.
 	 */
 	BUG_ON(request_irq(ipi, icp_ops->ipi_action,
-			   IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+			   IRQF_PERCPU, "IPI", NULL));
 }
 
 int __init xics_smp_probe(void)
@@ -409,14 +408,10 @@
 	int rc = -1;
 
 	/* Fist locate ICP */
-#ifdef CONFIG_PPC_ICP_HV
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		rc = icp_hv_init();
-#endif
-#ifdef CONFIG_PPC_ICP_NATIVE
 	if (rc < 0)
 		rc = icp_native_init();
-#endif
 	if (rc < 0) {
 		pr_warning("XICS: Cannot find a Presentation Controller !\n");
 		return;
@@ -429,9 +424,9 @@
 	xics_ipi_chip.irq_eoi = icp_ops->eoi;
 
 	/* Now locate ICS */
-#ifdef CONFIG_PPC_ICS_RTAS
 	rc = ics_rtas_init();
-#endif
+	if (rc < 0)
+		rc = ics_opal_init();
 	if (rc < 0)
 		pr_warning("XICS: Cannot find a Source Controller !\n");
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 42541bb..03a217a 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -18,7 +18,7 @@
 #include <linux/delay.h>
 #include <linux/kallsyms.h>
 #include <linux/cpumask.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sysrq.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -340,8 +340,8 @@
 
 static inline int unrecoverable_excp(struct pt_regs *regs)
 {
-#ifdef CONFIG_4xx
-	/* We have no MSR_RI bit on 4xx, so we simply return false */
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E)
+	/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
 	return 0;
 #else
 	return ((regs->msr & MSR_RI) == 0);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a9fbd43..373679b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -572,6 +572,7 @@
 config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on 64BIT
+	select KEXEC
 	help
 	  Generate crash dump after being started by kexec.
 	  Crash dump kernels are loaded in the main kernel with kexec-tools
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index 4967677..ffd1ac2 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -368,9 +368,12 @@
 
 	if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
 		return 0;
-	if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+
+	if (facility_mask & CRYPT_S390_MSA3 &&
+	    (!test_facility(2) || !test_facility(76)))
 		return 0;
-	if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
+	if (facility_mask & CRYPT_S390_MSA4 &&
+	    (!test_facility(2) || !test_facility(77)))
 		return 0;
 
 	switch (func & CRYPT_S390_OP_MASK) {
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 48884f8..bd37d09 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -14,6 +14,7 @@
  */
 
 #include <crypto/internal/hash.h>
+#include <linux/module.h>
 #include "sha.h"
 #include "crypt_s390.h"
 
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 24e1847..b0c235c 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -47,7 +47,7 @@
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
-#define CPUSTAT_HOST       0x80000000
+#define CPUSTAT_STOPPED    0x80000000
 #define CPUSTAT_WAIT       0x10000000
 #define CPUSTAT_ECALL_PEND 0x08000000
 #define CPUSTAT_STOP_INT   0x04000000
@@ -139,6 +139,7 @@
 	u32 instruction_stfl;
 	u32 instruction_tprot;
 	u32 instruction_sigp_sense;
+	u32 instruction_sigp_sense_running;
 	u32 instruction_sigp_external_call;
 	u32 instruction_sigp_emergency;
 	u32 instruction_sigp_stop;
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 34ede0e..524d23b 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -593,6 +593,8 @@
 	unsigned long address, bits;
 	unsigned char skey;
 
+	if (!pte_present(*ptep))
+		return pgste;
 	address = pte_val(*ptep) & PAGE_MASK;
 	skey = page_get_storage_key(address);
 	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
@@ -625,6 +627,8 @@
 #ifdef CONFIG_PGSTE
 	int young;
 
+	if (!pte_present(*ptep))
+		return pgste;
 	young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
 	/* Transfer page referenced bit to pte software bit (host view) */
 	if (young || (pgste_val(pgste) & RCP_HR_BIT))
@@ -638,13 +642,15 @@
 
 }
 
-static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
+static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
 {
 #ifdef CONFIG_PGSTE
 	unsigned long address;
 	unsigned long okey, nkey;
 
-	address = pte_val(*ptep) & PAGE_MASK;
+	if (!pte_present(entry))
+		return;
+	address = pte_val(entry) & PAGE_MASK;
 	okey = nkey = page_get_storage_key(address);
 	nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
 	/* Set page access key and fetch protection bit from pgste */
@@ -712,7 +718,7 @@
 
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
-		pgste_set_pte(ptep, pgste);
+		pgste_set_pte(ptep, pgste, entry);
 		*ptep = entry;
 		pgste_set_unlock(ptep, pgste);
 	} else
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 5a09971..097183c 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -82,6 +82,7 @@
 #define MACHINE_FLAG_LPAR	(1UL << 12)
 #define MACHINE_FLAG_SPP	(1UL << 13)
 #define MACHINE_FLAG_TOPOLOGY	(1UL << 14)
+#define MACHINE_FLAG_STCKF	(1UL << 15)
 
 #define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
 #define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
@@ -100,6 +101,7 @@
 #define MACHINE_HAS_PFMF	(0)
 #define MACHINE_HAS_SPP		(0)
 #define MACHINE_HAS_TOPOLOGY	(0)
+#define MACHINE_HAS_STCKF	(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
@@ -111,6 +113,7 @@
 #define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #define MACHINE_HAS_SPP		(S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
 #define MACHINE_HAS_TOPOLOGY	(S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_STCKF	(S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index d610bef..c447a27 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -90,7 +90,7 @@
 {
 	unsigned long long clk;
 
-	if (test_facility(25))
+	if (MACHINE_HAS_STCKF)
 		asm volatile(".insn	s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
 	else
 		clk = get_clock();
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 404bdb96..58de4c9 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -277,7 +277,9 @@
 #define __NR_clock_adjtime	337
 #define __NR_syncfs		338
 #define __NR_setns		339
-#define NR_syscalls 340
+#define __NR_process_vm_readv	340
+#define __NR_process_vm_writev	341
+#define NR_syscalls 342
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 5006a1d..18c51df 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1627,3 +1627,23 @@
 	lgfr	%r2,%r2			# int
 	lgfr	%r3,%r3			# int
 	jg	sys_setns
+
+ENTRY(compat_sys_process_vm_readv_wrapper)
+	lgfr	%r2,%r2			# compat_pid_t
+	llgtr	%r3,%r3			# struct compat_iovec __user *
+	llgfr	%r4,%r4			# unsigned long
+	llgtr	%r5,%r5			# struct compat_iovec __user *
+	llgfr	%r6,%r6			# unsigned long
+	llgf	%r0,164(%r15)		# unsigned long
+	stg	%r0,160(%r15)
+	jg	sys_process_vm_readv
+
+ENTRY(compat_sys_process_vm_writev_wrapper)
+	lgfr	%r2,%r2			# compat_pid_t
+	llgtr	%r3,%r3			# struct compat_iovec __user *
+	llgfr	%r4,%r4			# unsigned long
+	llgtr	%r5,%r5			# struct compat_iovec __user *
+	llgfr	%r6,%r6			# unsigned long
+	llgf	%r0,164(%r15)		# unsigned long
+	stg	%r0,160(%r15)
+	jg	sys_process_vm_writev
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 37394b3..c9ffe00 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -390,6 +390,8 @@
 		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
 	if (test_facility(40))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+	if (test_facility(25))
+		S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
 #endif
 }
 
diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c
index 44cc06b..b987ab2 100644
--- a/arch/s390/kernel/jump_label.c
+++ b/arch/s390/kernel/jump_label.c
@@ -18,26 +18,15 @@
 } __packed;
 
 struct insn_args {
-	unsigned long *target;
-	struct insn *insn;
-	ssize_t size;
+	struct jump_entry *entry;
+	enum jump_label_type type;
 };
 
-static int __arch_jump_label_transform(void *data)
+static void __jump_label_transform(struct jump_entry *entry,
+				   enum jump_label_type type)
 {
-	struct insn_args *args = data;
-	int rc;
-
-	rc = probe_kernel_write(args->target, args->insn, args->size);
-	WARN_ON_ONCE(rc < 0);
-	return 0;
-}
-
-void arch_jump_label_transform(struct jump_entry *entry,
-			       enum jump_label_type type)
-{
-	struct insn_args args;
 	struct insn insn;
+	int rc;
 
 	if (type == JUMP_LABEL_ENABLE) {
 		/* brcl 15,offset */
@@ -49,11 +38,33 @@
 		insn.offset = 0;
 	}
 
-	args.target = (void *) entry->code;
-	args.insn = &insn;
-	args.size = JUMP_LABEL_NOP_SIZE;
+	rc = probe_kernel_write((void *)entry->code, &insn, JUMP_LABEL_NOP_SIZE);
+	WARN_ON_ONCE(rc < 0);
+}
 
-	stop_machine(__arch_jump_label_transform, &args, NULL);
+static int __sm_arch_jump_label_transform(void *data)
+{
+	struct insn_args *args = data;
+
+	__jump_label_transform(args->entry, args->type);
+	return 0;
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	struct insn_args args;
+
+	args.entry = entry;
+	args.type = type;
+
+	stop_machine(__sm_arch_jump_label_transform, &args, NULL);
+}
+
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type)
+{
+	__jump_label_transform(entry, type);
 }
 
 #endif
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 8ac6bfa..e58a462 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -211,6 +211,8 @@
 
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return;
+	if (OLDMEM_BASE)
+		return;
 	if (console_devno != -1)
 		sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
 			ipl_info.data.fcp.dev_id.devno, console_devno);
@@ -482,7 +484,7 @@
 
 
 #ifdef CONFIG_ZFCPDUMP
-	if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
+	if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
 		memory_end = ZFCPDUMP_HSA_SIZE;
 		memory_end_set = 1;
 	}
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 73eb08c..bcab2f0 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -348,3 +348,5 @@
 SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
 SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
 SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
+SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
+SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 77b8942..fdb5b8c 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -68,8 +68,10 @@
 	return mask;
 }
 
-static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
-			     struct mask_info *book, struct mask_info *core)
+static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
+					  struct mask_info *book,
+					  struct mask_info *core,
+					  int z10)
 {
 	unsigned int cpu;
 
@@ -88,10 +90,16 @@
 			cpu_book_id[lcpu] = book->id;
 #endif
 			cpumask_set_cpu(lcpu, &core->mask);
-			cpu_core_id[lcpu] = core->id;
+			if (z10) {
+				cpu_core_id[lcpu] = rcpu;
+				core = core->next;
+			} else {
+				cpu_core_id[lcpu] = core->id;
+			}
 			smp_cpu_polarization[lcpu] = tl_cpu->pp;
 		}
 	}
+	return core;
 }
 
 static void clear_masks(void)
@@ -123,18 +131,41 @@
 {
 #ifdef CONFIG_SCHED_BOOK
 	struct mask_info *book = &book_info;
+	struct cpuid cpu_id;
 #else
 	struct mask_info *book = NULL;
 #endif
 	struct mask_info *core = &core_info;
 	union topology_entry *tle, *end;
+	int z10 = 0;
 
-
+#ifdef CONFIG_SCHED_BOOK
+	get_cpu_id(&cpu_id);
+	z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
+#endif
 	spin_lock_irq(&topology_lock);
 	clear_masks();
 	tle = info->tle;
 	end = (union topology_entry *)((unsigned long)info + info->length);
 	while (tle < end) {
+#ifdef CONFIG_SCHED_BOOK
+		if (z10) {
+			switch (tle->nl) {
+			case 1:
+				book = book->next;
+				book->id = tle->container.id;
+				break;
+			case 0:
+				core = add_cpus_to_mask(&tle->cpu, book, core, z10);
+				break;
+			default:
+				clear_masks();
+				goto out;
+			}
+			tle = next_tle(tle);
+			continue;
+		}
+#endif
 		switch (tle->nl) {
 #ifdef CONFIG_SCHED_BOOK
 		case 2:
@@ -147,7 +178,7 @@
 			core->id = tle->container.id;
 			break;
 		case 0:
-			add_cpus_to_mask(&tle->cpu, book, core);
+			add_cpus_to_mask(&tle->cpu, book, core, z10);
 			break;
 		default:
 			clear_masks();
@@ -328,8 +359,8 @@
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		printk(" %d", info->mag[i]);
 	printk(" / %d\n", info->mnest);
-	alloc_masks(info, &core_info, 2);
+	alloc_masks(info, &core_info, 1);
 #ifdef CONFIG_SCHED_BOOK
-	alloc_masks(info, &book_info, 3);
+	alloc_masks(info, &book_info, 2);
 #endif
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 56fe6bc..e4c79eb 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -43,6 +43,8 @@
 
 	NOTES :text :note
 
+	.dummy : { *(.dummy) } :data
+
 	RODATA
 
 #ifdef CONFIG_SHARED_KERNEL
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 87cedd6..8943e82 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -70,7 +70,7 @@
 		return -EOPNOTSUPP;
 	}
 
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index c7c5189..0243454 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -132,7 +132,6 @@
 	int rc = 0;
 
 	vcpu->stat.exit_stop_request++;
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 	if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
@@ -149,6 +148,8 @@
 	}
 
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+		atomic_set_mask(CPUSTAT_STOPPED,
+				&vcpu->arch.sie_block->cpuflags);
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
 		rc = -EOPNOTSUPP;
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 87c1670..278ee00 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -252,6 +252,7 @@
 			offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
 		if (rc == -EFAULT)
 			exception = 1;
+		atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 		break;
 
 	case KVM_S390_PROGRAM_INT:
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0bd3bea..d1c44573 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -65,6 +65,7 @@
 	{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
 	{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
 	{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+	{ "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
 	{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
 	{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
 	{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
@@ -127,6 +128,7 @@
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
 	case KVM_CAP_S390_GMAP:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
 	default:
@@ -270,10 +272,12 @@
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
 	gmap_enable(vcpu->arch.gmap);
+	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
@@ -301,7 +305,9 @@
 
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
-	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+						    CPUSTAT_SM |
+						    CPUSTAT_STOPPED);
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
@@ -428,7 +434,7 @@
 {
 	int rc = 0;
 
-	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+	if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
 		rc = -EBUSY;
 	else {
 		vcpu->run->psw_mask = psw.mask;
@@ -501,7 +507,7 @@
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
-	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 
 	BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 3916263..d026389 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -336,6 +336,7 @@
 	u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0;
 	u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0;
 	struct vm_area_struct *vma;
+	unsigned long user_address;
 
 	vcpu->stat.instruction_tprot++;
 
@@ -349,9 +350,14 @@
 		return -EOPNOTSUPP;
 
 
+	/* we must resolve the address without holding the mmap semaphore.
+	 * This is ok since the userspace hypervisor is not supposed to change
+	 * the mapping while the guest queries the memory. Otherwise the guest
+	 * might crash or get wrong info anyway. */
+	user_address = (unsigned long) __guestaddr_to_user(vcpu, address1);
+
 	down_read(&current->mm->mmap_sem);
-	vma = find_vma(current->mm,
-			(unsigned long) __guestaddr_to_user(vcpu, address1));
+	vma = find_vma(current->mm, user_address);
 	if (!vma) {
 		up_read(&current->mm->mmap_sem);
 		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index f815118..0a7941d 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -31,9 +31,11 @@
 #define SIGP_SET_PREFIX        0x0d
 #define SIGP_STORE_STATUS_ADDR 0x0e
 #define SIGP_SET_ARCH          0x12
+#define SIGP_SENSE_RUNNING     0x15
 
 /* cpu status bits */
 #define SIGP_STAT_EQUIPMENT_CHECK   0x80000000UL
+#define SIGP_STAT_NOT_RUNNING	    0x00000400UL
 #define SIGP_STAT_INCORRECT_STATE   0x00000200UL
 #define SIGP_STAT_INVALID_PARAMETER 0x00000100UL
 #define SIGP_STAT_EXT_CALL_PENDING  0x00000080UL
@@ -57,8 +59,8 @@
 	spin_lock(&fi->lock);
 	if (fi->local_int[cpu_addr] == NULL)
 		rc = 3; /* not operational */
-	else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
-		 & CPUSTAT_RUNNING) {
+	else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
+		  & CPUSTAT_STOPPED)) {
 		*reg &= 0xffffffff00000000UL;
 		rc = 1; /* status stored */
 	} else {
@@ -251,7 +253,7 @@
 
 	spin_lock_bh(&li->lock);
 	/* cpu must be in stopped state */
-	if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+	if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
 		rc = 1; /* incorrect state */
 		*reg &= SIGP_STAT_INCORRECT_STATE;
 		kfree(inti);
@@ -275,6 +277,38 @@
 	return rc;
 }
 
+static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr,
+				unsigned long *reg)
+{
+	int rc;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+
+	if (cpu_addr >= KVM_MAX_VCPUS)
+		return 3; /* not operational */
+
+	spin_lock(&fi->lock);
+	if (fi->local_int[cpu_addr] == NULL)
+		rc = 3; /* not operational */
+	else {
+		if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+		    & CPUSTAT_RUNNING) {
+			/* running */
+			rc = 1;
+		} else {
+			/* not running */
+			*reg &= 0xffffffff00000000UL;
+			*reg |= SIGP_STAT_NOT_RUNNING;
+			rc = 0;
+		}
+	}
+	spin_unlock(&fi->lock);
+
+	VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr,
+		   rc);
+
+	return rc;
+}
+
 int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 {
 	int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
@@ -331,6 +365,11 @@
 		rc = __sigp_set_prefix(vcpu, cpu_addr, parameter,
 				       &vcpu->arch.guest_gprs[r1]);
 		break;
+	case SIGP_SENSE_RUNNING:
+		vcpu->stat.instruction_sigp_sense_running++;
+		rc = __sigp_sense_running(vcpu, cpu_addr,
+					  &vcpu->arch.guest_gprs[r1]);
+		break;
 	case SIGP_RESTART:
 		vcpu->stat.instruction_sigp_restart++;
 		/* user space must know about restart */
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 1766def..a9a3018 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -587,8 +587,13 @@
 		} else {
 			/* Completion interrupt was faster than initial
 			 * interrupt. Set pfault_wait to -1 so the initial
-			 * interrupt doesn't put the task to sleep. */
-			tsk->thread.pfault_wait = -1;
+			 * interrupt doesn't put the task to sleep.
+			 * If the task is not running, ignore the completion
+			 * interrupt since it must be a leftover of a PFAULT
+			 * CANCEL operation which didn't remove all pending
+			 * completion interrupts. */
+			if (tsk->state == TASK_RUNNING)
+				tsk->thread.pfault_wait = -1;
 		}
 		put_task_struct(tsk);
 	} else {
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 59b6631..d4b9fb4 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/pfn.h>
 #include <linux/poison.h>
 #include <linux/initrd.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 #include <asm/processor.h>
 #include <asm/system.h>
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 288add8..df169e8 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -52,16 +52,6 @@
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	def_bool y
-
-config GENERIC_SYSCALL_TABLE
-	def_bool y
-
-config SCORE_L1_CACHE_SHIFT
-	int
-	default "4"
-
 menu "Kernel type"
 
 config 32BIT
@@ -96,15 +86,6 @@
 
 source "init/Kconfig"
 
-config PROBE_INITRD_HEADER
-	bool "Probe initrd header created by addinitrd"
-	depends on BLK_DEV_INITRD
-	help
-	  Probe initrd header at the last page of kernel image.
-	  Say Y here if you are using arch/score/boot/addinitrd.c to
-	  add initrd or initramfs image to the kernel image.
-	  Otherwise, say N.
-
 config MMU
 	def_bool y
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ff9177c..5629e20 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -101,10 +101,6 @@
 	def_bool y
 	depends on SMP && PREEMPT
 
-config SYS_SUPPORTS_PM
-	bool
-	depends on !SMP
-
 config ARCH_SUSPEND_POSSIBLE
 	def_bool n
 
@@ -649,7 +645,7 @@
 	  a specially reserved region and then later executed after
 	  a crash by kdump/kexec. The crash dump kernel must be compiled
 	  to a memory address not used by the main kernel using
-	  MEMORY_START.
+	  PHYSICAL_START.
 
 	  For more details see Documentation/kdump/kdump.txt
 
@@ -660,6 +656,17 @@
 	  Jump between original kernel and kexeced kernel and invoke
 	  code via KEXEC
 
+config PHYSICAL_START
+	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+	default MEMORY_START
+	---help---
+	  This gives the physical address where the kernel is loaded
+	  and is ordinarily the same as MEMORY_START.
+
+	  Different values are primarily used in the case of kexec on panic
+	  where the fail safe kernel needs to run at a different address
+	  than the panic-ed kernel.
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 99385d0..3fc0f41 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -80,6 +80,7 @@
 defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
 defaultimage-$(CONFIG_SH_MIGOR)			:= uImage
 defaultimage-$(CONFIG_SH_AP325RXA)		:= uImage
+defaultimage-$(CONFIG_SH_SH7757LCR)		:= uImage
 defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE)	:= uImage
 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
index 9da92ac..b3ae9d3 100644
--- a/arch/sh/boards/board-espt.c
+++ b/arch/sh/boards/board-espt.c
@@ -13,9 +13,9 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/sh_eth.h>
 #include <asm/machvec.h>
 #include <asm/sizes.h>
-#include <asm/sh_eth.h>
 
 /* NOR Flash */
 static struct mtd_partition espt_nor_flash_partitions[] = {
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index f968f17..03820c3 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -41,8 +41,7 @@
 	printk("SnapGear: EraseConfig init\n");
 
 	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
+	if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
 		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
 				irq);
 	else
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index fa2a208..ec8c84c 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -18,8 +18,8 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/sh_eth.h>
 #include <cpu/sh7757.h>
-#include <asm/sh_eth.h>
 #include <asm/heartbeat.h>
 
 static struct resource heartbeat_resource = {
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index d362657..7030f4c 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -345,9 +345,10 @@
 		.width = 640,
 		.height = 480,
 	},
-	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
-	SOCAM_DATA_ACTIVE_HIGH,
+	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+	V4L2_MBUS_DATA_ACTIVE_HIGH,
+	.mbus_type = V4L2_MBUS_PARALLEL,
 	.set_capture = camera_set_capture,
 };
 
@@ -501,8 +502,7 @@
 };
 
 static struct ov772x_camera_info ov7725_info = {
-	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \
-			  OV772X_FLAG_8BIT,
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
 	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
 };
 
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 311bceb..724e8b7 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -46,13 +46,11 @@
 static struct irqaction cayman_action_smsc = {
 	.name		= "Cayman SMSC Mux",
 	.handler	= cayman_interrupt_smsc,
-	.flags		= IRQF_DISABLED,
 };
 
 static struct irqaction cayman_action_pci2 = {
 	.name		= "Cayman PCI2 Mux",
 	.handler	= cayman_interrupt_pci2,
-	.flags		= IRQF_DISABLED,
 };
 
 static void enable_cayman_irq(struct irq_data *data)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b24d69d..92ddce4 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -28,13 +28,13 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/sh_eth.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
 #include <asm/clock.h>
 #include <asm/suspend.h>
 #include <cpu/sh7724.h>
@@ -248,6 +248,10 @@
 	.driver_param = {
 		.buswait_bwait		= 4,
 		.detection_delay	= 5,
+		.d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+		.d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+		.d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+		.d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
 	},
 };
 
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index b49535c..865d8d6 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -86,7 +86,7 @@
 	int ret;
 
 	ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
-			  IRQF_DISABLED, MODNAME, NULL);
+			  0, MODNAME, NULL);
 	if (unlikely(ret < 0)) {
 		printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
 		       HP680_BTN_IRQ);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 2d4c9c8..e4c8119 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -448,9 +448,7 @@
 	},
 };
 
-static struct ov772x_camera_info ov7725_info = {
-	.flags		= OV772X_FLAG_8BIT,
-};
+static struct ov772x_camera_info ov7725_info;
 
 static struct soc_camera_link ov7725_link = {
 	.power		= ov7725_power,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index d007567..b747c0a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,12 +23,12 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
 #include <asm/clock.h>
 #include <asm/suspend.h>
 #include <cpu/sh7724.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index f3d828f..dd036f1 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,8 +17,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/fb.h>
 #include <linux/io.h>
+#include <linux/sh_eth.h>
 #include <mach/sh7763rdp.h>
-#include <asm/sh_eth.h>
 #include <asm/sh7760fb.h>
 
 /* NOR Flash */
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index ba515d8..e4ea31a 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -19,6 +19,7 @@
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
+CONFIG_PHYSICAL_START	?= $(CONFIG_MEMORY_START)
 
 suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)	:= gz
@@ -48,7 +49,7 @@
 	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
 
 KERNEL_MEMORY	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+		     $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
 
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
@@ -114,4 +115,5 @@
 	@echo '  Image $@ is ready'
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
+       CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
+       KERNEL_MEMORY suffix-y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index af7bb58..be9ca7c 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -170,7 +170,7 @@
 {
 	int ret;
 
-	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
 			  "g2 DMA handler", &g2_dma_info);
 	if (unlikely(ret))
 		return -EINVAL;
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 3cee58e..706a343 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -70,7 +70,6 @@
 static struct irqaction pvr2_dma_irq = {
 	.name		= "pvr2 DMA handler",
 	.handler	= pvr2_dma_interrupt,
-	.flags		= IRQF_DISABLED,
 };
 
 static struct dma_ops pvr2_dma_ops = {
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 8272087..a60da6d 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -95,7 +95,7 @@
 #if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
-				IRQF_DISABLED,
+				0,
 #endif
 				chan->dev_id, chan);
 }
@@ -305,7 +305,7 @@
 #if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
-				IRQF_DISABLED,
+				0,
 #endif
 				dmae_name[n], (void *)dmae_name[n]);
 		if (unlikely(i < 0)) {
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 1ee631d..83cc704 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -11,6 +11,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/stat.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 6ab9c4a..3d66a32 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -174,17 +174,17 @@
 	or = __raw_readl(DMAOR);
 	__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
 
-	ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI0, dmabrg_irq, 0,
 			"DMABRG USB address error", NULL);
 	if (ret)
 		goto out0;
 
-	ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI1, dmabrg_irq, 0,
 			"DMABRG Transfer End", NULL);
 	if (ret)
 		goto out1;
 
-	ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+	ret = request_irq(DMABRGI2, dmabrg_irq, 0,
 			"DMABRG Transfer Half", NULL);
 	if (ret == 0)
 		return ret;
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 0bf296c..16c1e72 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -107,13 +107,13 @@
 	u32 uval;
 
         if (request_irq(IRQ_ERR, pcish5_err_irq,
-                        IRQF_DISABLED, "PCI Error",NULL) < 0) {
+                        0, "PCI Error",NULL) < 0) {
                 printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
                 return -EINVAL;
         }
 
         if (request_irq(IRQ_SERR, pcish5_serr_irq,
-                        IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+                        0, "PCI SERR interrupt", NULL) < 0) {
                 printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
                 return -EINVAL;
         }
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index edb7cca..fa7b978c 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -172,7 +172,7 @@
 		     PCI_STATUS_SIG_TARGET_ABORT | \
 		     PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
 
-	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
 			  "PCI SERR interrupt", hose);
 	if (unlikely(ret)) {
 		printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 194231c..c2691af 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 
 unsigned long PCIBIOS_MIN_IO = 0x0000;
 unsigned long PCIBIOS_MIN_MEM = 0;
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index afc2455..637b79b 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -63,7 +63,7 @@
 	BUG_ON(!psw_info);
 
 	ret = request_irq(irq, psw_info->irq_handler,
-			  IRQF_DISABLED | psw_info->irq_flags,
+			  psw_info->irq_flags,
 			  psw_info->name ? psw_info->name : DRV_NAME, pdev);
 	if (unlikely(ret < 0))
 		goto err;
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 822d608..15d9703 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -113,6 +113,16 @@
 #define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
 
 /*
+ * PHYSICAL_OFFSET is the offset in physical memory where the base
+ * of the kernel is loaded.
+ */
+#ifdef CONFIG_PHYSICAL_START
+#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
+#else
+#define PHYSICAL_OFFSET 0
+#endif
+
+/*
  * PAGE_OFFSET is the virtual address of the start of kernel address
  * space.
  */
@@ -141,8 +151,13 @@
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_UNCACHED_MAPPING
+#if defined(CONFIG_29BIT)
+#define UNCAC_ADDR(addr)	P2SEGADDR(addr)
+#define CAC_ADDR(addr)		P1SEGADDR(addr)
+#else
 #define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + uncached_start)
 #define CAC_ADDR(addr)		((addr) - uncached_start + PAGE_OFFSET)
+#endif
 #else
 #define UNCAC_ADDR(addr)	((addr))
 #define CAC_ADDR(addr)		((addr))
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 3432008..152b862 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -375,8 +375,10 @@
 #define __NR_syncfs		362
 #define __NR_sendmmsg		363
 #define __NR_setns		364
+#define __NR_process_vm_readv	365
+#define __NR_process_vm_writev	366
 
-#define NR_syscalls 365
+#define NR_syscalls 367
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index ec98986..c330c23 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -396,10 +396,12 @@
 #define __NR_syncfs		373
 #define __NR_sendmmsg		374
 #define __NR_setns		375
+#define __NR_process_vm_readv	376
+#define __NR_process_vm_writev	377
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 376
+#define NR_syscalls 378
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index a43124e..0bd744f 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -176,10 +176,12 @@
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 192, 192, 192, 192 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif0_device = {
@@ -193,10 +195,12 @@
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 196, 196, 196, 196 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif1_device = {
@@ -210,10 +214,12 @@
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 200, 200, 200, 200 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif2_device = {
@@ -227,10 +233,12 @@
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 204, 204, 204, 204 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif3_device = {
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 3b097b0..19222da 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -113,7 +113,14 @@
 
 	/* MSTP32 clocks */
 	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP004]),
-	CLKDEV_CON_ID("riic", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
+	CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
 
 	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP113]),
 	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP114]),
@@ -121,6 +128,7 @@
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]),
 
+	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
 	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
 	CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
 };
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index de865ca..03f2b55 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -79,7 +79,7 @@
 
 	for (i = 0; i < SMP_MSG_NR; i++)
 		request_irq(104 + i, ipi_interrupt_handler,
-			    IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+			    IRQF_PERCPU, "IPI", (void *)(long)i);
 
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index e4469e72..1cc257c 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/suspend.h>
 #include <linux/cpuidle.h>
+#include <linux/export.h>
 #include <asm/suspend.h>
 #include <asm/uaccess.h>
 #include <asm/hwblk.h>
@@ -25,11 +26,12 @@
 };
 
 static int cpuidle_sleep_enter(struct cpuidle_device *dev,
-			       struct cpuidle_state *state)
+				struct cpuidle_driver *drv,
+				int index)
 {
 	unsigned long allowed_mode = arch_hwblk_sleep_mode();
 	ktime_t before, after;
-	int requested_state = state - &dev->states[0];
+	int requested_state = index;
 	int allowed_state;
 	int k;
 
@@ -46,11 +48,13 @@
 	 */
 	k = min_t(int, allowed_state, requested_state);
 
-	dev->last_state = &dev->states[k];
 	before = ktime_get();
 	sh_mobile_call_standby(cpuidle_mode[k]);
 	after = ktime_get();
-	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	dev->last_residency = (int)ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	return k;
 }
 
 static struct cpuidle_device cpuidle_dev;
@@ -62,19 +66,19 @@
 void sh_mobile_setup_cpuidle(void)
 {
 	struct cpuidle_device *dev = &cpuidle_dev;
+	struct cpuidle_driver *drv = &cpuidle_driver;
 	struct cpuidle_state *state;
 	int i;
 
-	cpuidle_register_driver(&cpuidle_driver);
 
 	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
+		drv->states[i].name[0] = '\0';
+		drv->states[i].desc[0] = '\0';
 	}
 
 	i = CPUIDLE_DRIVER_STATE_START;
 
-	state = &dev->states[i++];
+	state = &drv->states[i++];
 	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
 	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 1;
@@ -84,10 +88,10 @@
 	state->flags |= CPUIDLE_FLAG_TIME_VALID;
 	state->enter = cpuidle_sleep_enter;
 
-	dev->safe_state = state;
+	drv->safe_state_index = i-1;
 
 	if (sh_mobile_sleep_supported & SUSP_SH_SF) {
-		state = &dev->states[i++];
+		state = &drv->states[i++];
 		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 		strncpy(state->desc, "SuperH Sleep Mode [SF]",
 			CPUIDLE_DESC_LEN);
@@ -100,7 +104,7 @@
 	}
 
 	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
-		state = &dev->states[i++];
+		state = &drv->states[i++];
 		snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
 		strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
 			CPUIDLE_DESC_LEN);
@@ -112,7 +116,10 @@
 		state->enter = cpuidle_sleep_enter;
 	}
 
+	drv->state_count = i;
 	dev->state_count = i;
 
+	cpuidle_register_driver(&cpuidle_driver);
+
 	cpuidle_register_device(dev);
 }
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 2ee21a4..10b14e3 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/perf_event.h>
+#include <linux/export.h>
 #include <asm/processor.h>
 
 struct cpu_hw_events {
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 58bff45..1a0e946 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -211,13 +211,16 @@
 	}
 
 	/*
-	 *  We don't know which RAM region contains kernel data,
-	 *  so we try it repeatedly and let the resource manager
-	 *  test it.
+	 * We don't know which RAM region contains kernel data or
+	 * the reserved crashkernel region, so try it repeatedly
+	 * and let the resource manager test it.
 	 */
 	request_resource(res, &code_resource);
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
+#ifdef CONFIG_KEXEC
+	request_resource(res, &crashk_res);
+#endif
 
 	/*
 	 * Also make sure that there is a PMB mapping that covers this
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 293e39c..ee56a9b 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -382,3 +382,5 @@
 	.long sys_syncfs
 	.long sys_sendmmsg
 	.long sys_setns
+	.long sys_process_vm_readv	/* 365 */
+	.long sys_process_vm_writev
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index ceb34b9..9af7de2 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -402,3 +402,5 @@
 	.long sys_syncfs
 	.long sys_sendmmsg
 	.long sys_setns			/* 375 */
+	.long sys_process_vm_readv
+	.long sys_process_vm_writev
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 38e8628..4649a6f 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -11,8 +11,10 @@
 #include <linux/cpumask.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
+#include <linux/topology.h>
 #include <linux/node.h>
 #include <linux/nodemask.h>
+#include <linux/export.h>
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 731c10c..c98905f 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -23,7 +23,7 @@
 ENTRY(_start)
 SECTIONS
 {
-	. = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+	. = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
 
 	_text = .;		/* Text and read-only data */
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 58a93fb3..939ca0f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/memblock.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include <asm/mmu_context.h>
 #include <asm/mmzone.h>
 #include <asm/kexec.h>
@@ -287,6 +288,8 @@
 static void __init early_reserve_mem(void)
 {
 	unsigned long start_pfn;
+	u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
+	u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
 
 	/*
 	 * Partially used pages are not usable - thus
@@ -300,15 +303,13 @@
 	 * this catches the (definitely buggy) case of us accidentally
 	 * initializing the bootmem allocator with an invalid RAM area.
 	 */
-	memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
-		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
-		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+	memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
 
 	/*
 	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
 	 */
 	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+		memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
 
 	/*
 	 * Handle additional early reservations
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 1a6f20d..f92602e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -560,12 +560,7 @@
 	  Only choose N if you know in advance that you will not need to modify
 	  OpenPROM settings on the running system.
 
-# Makefile helpers
-config SPARC32_PCI
-	bool
-	default y
-	depends on SPARC32 && PCI
-
+# Makefile helper
 config SPARC64_PCI
 	bool
 	default y
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 5b31a8e..a790cc6 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -431,10 +431,6 @@
 #define kern_addr_valid(addr) \
 	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-			      unsigned long from, unsigned long pfn,
-			      unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -443,6 +439,22 @@
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long long offset, space, phys_base;
+
+	offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT;
+	space = GET_IOSPACE(pfn);
+	phys_base = offset | (space << 32ULL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
 ({									  \
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index adf8932..38ebb2c 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -757,10 +757,6 @@
 
 extern int page_in_phys_avail(unsigned long paddr);
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			       unsigned long pfn,
-			       unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -769,6 +765,22 @@
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+	int space = GET_IOSPACE(pfn);
+	unsigned long phys_base;
+
+	phys_base = offset | (((unsigned long) space) << 32UL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #include <asm-generic/pgtable.h>
 
 /* We provide our own get_unmapped_area to cope with VA holes and
diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h
index e8ba953..e2f4670 100644
--- a/arch/sparc/include/asm/termios.h
+++ b/arch/sparc/include/asm/termios.h
@@ -40,7 +40,6 @@
 };
 
 #ifdef __KERNEL__
-#include <linux/module.h>
 
 /*
  * c_cc characters in the termio structure.  Oh, how I love being
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 6260d5d..c7cb0af 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -406,8 +406,10 @@
 #define __NR_syncfs		335
 #define __NR_sendmmsg		336
 #define __NR_setns		337
+#define __NR_process_vm_readv	338
+#define __NR_process_vm_writev	339
 
-#define NR_syscalls		338
+#define NR_syscalls		340
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index caef9de..812e10b 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -13,6 +13,7 @@
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/kernel/auxio_32.c b/arch/sparc/kernel/auxio_32.c
index acf5151..f7ea8f0 100644
--- a/arch/sparc/kernel/auxio_32.c
+++ b/arch/sparc/kernel/auxio_32.c
@@ -8,6 +8,7 @@
 #include <linux/spinlock.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/export.h>
 #include <asm/oplib.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
diff --git a/arch/sparc/kernel/btext.c b/arch/sparc/kernel/btext.c
index 89aa4eb..57073e5 100644
--- a/arch/sparc/kernel/btext.c
+++ b/arch/sparc/kernel/btext.c
@@ -6,7 +6,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/console.h>
 
 #include <asm/btext.h>
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 7eef3f7..38d48a5 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/of_device.h>
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index ba9b1ce..2d18196 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -6,7 +6,7 @@
 
 #include <linux/seq_file.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/threads.h>
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index 9323eaf..e4de74c 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2009 Hong H. Pham <hong.pham@windriver.com>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index e1ba8ee..b667aa6 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -1,5 +1,4 @@
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 77dbf6d..e306fb08 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1999  David S. Miller (davem@redhat.com)
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h
index e27f8ea..0c218e4 100644
--- a/arch/sparc/kernel/entry.h
+++ b/arch/sparc/kernel/entry.h
@@ -42,6 +42,9 @@
 extern void fpload(unsigned long *fpregs, unsigned long *fsr);
 
 #else /* CONFIG_SPARC32 */
+
+#include <asm/trap_block.h>
+
 struct popc_3insn_patch_entry {
 	unsigned int	addr;
 	unsigned int	insns[3];
@@ -57,6 +60,10 @@
 	__popc_6insn_patch_end;
 
 extern void __init per_cpu_patch(void);
+extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
+				    struct sun4v_1insn_patch_entry *);
+extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
+				    struct sun4v_2insn_patch_entry *);
 extern void __init sun4v_patch(void);
 extern void __init boot_cpu_id_too_large(int cpu);
 extern unsigned int dcache_parity_tl1_occurred;
diff --git a/arch/sparc/kernel/hvapi.c b/arch/sparc/kernel/hvapi.c
index c2d055d..8593672 100644
--- a/arch/sparc/kernel/hvapi.c
+++ b/arch/sparc/kernel/hvapi.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 
 #include <asm/hypervisor.h>
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 52a15fe..9167db4 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -8,7 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/oplib.h>
 #include <asm/idprom.h>
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 6f01e8c..4643d68 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -5,7 +5,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
index 9b89d842..b2668af 100644
--- a/arch/sparc/kernel/irq_32.c
+++ b/arch/sparc/kernel/irq_32.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cpudata.h>
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 0dd8422..d45b710 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -5,7 +5,6 @@
  * Copyright (C) 1998  Jakub Jelinek    (jj@ultra.linux.cz)
  */
 
-#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/linkage.h>
 #include <linux/ptrace.h>
diff --git a/arch/sparc/kernel/jump_label.c b/arch/sparc/kernel/jump_label.c
index ea2dafc..971fd43 100644
--- a/arch/sparc/kernel/jump_label.c
+++ b/arch/sparc/kernel/jump_label.c
@@ -36,12 +36,4 @@
 	put_online_cpus();
 }
 
-void arch_jump_label_text_poke_early(jump_label_t addr)
-{
-	u32 *insn_p = (u32 *) (unsigned long) addr;
-
-	*insn_p = 0x01000000;
-	flushi(insn_p);
-}
-
 #endif
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 732b0bc..435e406 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -4,7 +4,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index d17255a..a19c8a0 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index a8a9a27..f1cf6ef 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <asm/leon.h>
 #include <asm/leon_pci.h>
 
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
index fad1bd0..b1bc388 100644
--- a/arch/sparc/kernel/leon_pci_grpci2.c
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -9,7 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/leon.h>
 #include <asm/vaddrs.h>
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index acaebb6..6dc7962 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -11,11 +11,13 @@
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
 #include <linux/bootmem.h>
+#include <linux/export.h>
 
 #include <asm/cpudata.h>
 #include <asm/hypervisor.h>
 #include <asm/mdesc.h>
 #include <asm/prom.h>
+#include <asm/uaccess.h>
 #include <asm/oplib.h>
 #include <asm/smp.h>
 
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index da0c6c7..e551987 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -17,6 +17,8 @@
 #include <asm/processor.h>
 #include <asm/spitfire.h>
 
+#include "entry.h"
+
 #ifdef CONFIG_SPARC64
 
 #include <linux/jump_label.h>
@@ -203,6 +205,29 @@
 }
 
 #ifdef CONFIG_SPARC64
+static void do_patch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs)
+{
+	const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+		if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name))
+			sun4v_1insn = s;
+		if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name))
+			sun4v_2insn = s;
+	}
+
+	if (sun4v_1insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_1insn->sh_addr;
+		sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size);
+	}
+	if (sun4v_2insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_2insn->sh_addr;
+		sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size);
+	}
+}
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
@@ -210,6 +235,8 @@
 	/* make jump label nops */
 	jump_label_apply_nops(me);
 
+	do_patch_sections(hdr, sechdrs);
+
 	/* Cheetah's I-cache is fully coherent.  */
 	if (tlb_type == spitfire) {
 		unsigned long va;
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 300f810..c76fe0b 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/nmi.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kprobes.h>
 #include <linux/kernel_stat.h>
 #include <linux/reboot.h>
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index a312af4..4ee8ce0 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -2,7 +2,6 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 3bb2eac..7a3be6f 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -2,13 +2,14 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/irq.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <asm/spitfire.h>
 
 #include "of_device_common.h"
 
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
index cb15bbf..de199bf 100644
--- a/arch/sparc/kernel/of_device_common.c
+++ b/arch/sparc/kernel/of_device_common.c
@@ -2,7 +2,7 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mod_devicetable.h>
 #include <linux/errno.h>
 #include <linux/irq.h>
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8aa0d44..31111e3 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -8,7 +8,7 @@
  * with minor modifications, see there for credits.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/sched.h>
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index d29a32f..188f935 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/msi.h>
+#include <linux/export.h>
 #include <linux/irq.h>
 #include <linux/of_device.h>
 
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 86ae08d..f4d29e1 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index d1840db..3efaa46 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index f030b02..13d4aa2 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -8,6 +8,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
 
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index b01a06e..b272cda 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -12,6 +12,7 @@
 #include <linux/percpu.h>
 #include <linux/irq.h>
 #include <linux/msi.h>
+#include <linux/export.h>
 #include <linux/log2.h>
 #include <linux/of_device.h>
 
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 1aaf8c1..fcc148e 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -25,6 +25,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 
 #include <asm/irq.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 343b0f9..a24072a 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2009 David S. Miller (davem@davemloft.net)
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 
@@ -13,6 +13,7 @@
 #include <asm/pil.h>
 #include <asm/pcr.h>
 #include <asm/nmi.h>
+#include <asm/spitfire.h>
 
 /* This code is shared between various users of the performance
  * counters.  Users will be oprofile, pseudo-NMI watchdog, and the
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 6a585d3..0e32022 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index cb4c0f5..0d39075 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -4,7 +4,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index d959cd0..3739a06 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -12,7 +12,7 @@
 #include <stdarg.h>
 
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index 5ce3d15..b51cbb9 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -20,7 +20,6 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
-#include <linux/module.h>
 
 #include <asm/prom.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index 86597d9..340c5b9 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -19,7 +19,6 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
 
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index ed25834..4661480 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -15,7 +15,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
diff --git a/arch/sparc/kernel/reboot.c b/arch/sparc/kernel/reboot.c
index ef89d3d..006a42d 100644
--- a/arch/sparc/kernel/reboot.c
+++ b/arch/sparc/kernel/reboot.c
@@ -4,7 +4,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/reboot.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pm.h>
 
 #include <asm/system.h>
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index a161b9c..1271b3a 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 3e3e291..fe1e3fc 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -31,6 +31,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/kdebug.h>
+#include <linux/export.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index c965595a..a854a1c 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -234,40 +234,50 @@
 	}
 }
 
+void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start,
+			     struct sun4v_1insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insn;
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		start++;
+	}
+}
+
+void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start,
+			     struct sun4v_2insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insns[0];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		*(unsigned int *) (addr +  4) = start->insns[1];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
+
+		start++;
+	}
+}
+
 void __init sun4v_patch(void)
 {
 	extern void sun4v_hvapi_init(void);
-	struct sun4v_1insn_patch_entry *p1;
-	struct sun4v_2insn_patch_entry *p2;
 
 	if (tlb_type != hypervisor)
 		return;
 
-	p1 = &__sun4v_1insn_patch;
-	while (p1 < &__sun4v_1insn_patch_end) {
-		unsigned long addr = p1->addr;
+	sun4v_patch_1insn_range(&__sun4v_1insn_patch,
+				&__sun4v_1insn_patch_end);
 
-		*(unsigned int *) (addr +  0) = p1->insn;
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		p1++;
-	}
-
-	p2 = &__sun4v_2insn_patch;
-	while (p2 < &__sun4v_2insn_patch_end) {
-		unsigned long addr = p2->addr;
-
-		*(unsigned int *) (addr +  0) = p2->insns[0];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		*(unsigned int *) (addr +  4) = p2->insns[1];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
-
-		p2++;
-	}
+	sun4v_patch_2insn_range(&__sun4v_2insn_patch,
+				&__sun4v_2insn_patch_end);
 
 	sun4v_hvapi_init();
 }
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 2caa556..023b886 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -822,21 +822,23 @@
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-void do_signal32(sigset_t *oldset, struct pt_regs * regs,
-		 int restart_syscall, unsigned long orig_i0)
+void do_signal32(sigset_t *oldset, struct pt_regs * regs)
 {
 	struct k_sigaction ka;
+	unsigned long orig_i0;
+	int restart_syscall;
 	siginfo_t info;
 	int signr;
 	
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the "in syscall" bit, directing us to not perform a syscall
-	 * restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	orig_i0 = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 8ce247a..d54c6e5 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -519,10 +519,26 @@
 	siginfo_t info;
 	int signr;
 
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
-		restart_syscall = 1;
-	else
-		restart_syscall = 0;
+		regs->u_regs[UREG_G6] = orig_i0;
 
 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
 		oldset = &current->saved_sigmask;
@@ -535,8 +551,12 @@
 	 * the software "in syscall" bit, directing us to not perform
 	 * a syscall restart.
 	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
+
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index a2b8159..f0836cd 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -529,11 +529,27 @@
 	siginfo_t info;
 	int signr;
 	
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) &&
-	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
-		restart_syscall = 1;
-	} else
-		restart_syscall = 0;
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
+		regs->u_regs[UREG_G6] = orig_i0;
 
 	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
@@ -542,22 +558,20 @@
 
 #ifdef CONFIG_COMPAT
 	if (test_thread_flag(TIF_32BIT)) {
-		extern void do_signal32(sigset_t *, struct pt_regs *,
-					int restart_syscall,
-					unsigned long orig_i0);
-		do_signal32(oldset, regs, restart_syscall, orig_i0);
+		extern void do_signal32(sigset_t *, struct pt_regs *);
+		do_signal32(oldset, regs);
 		return;
 	}
 #endif	
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the software "in syscall" bit, directing us to not perform
-	 * a syscall restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c
index e7dc508..b19570d 100644
--- a/arch/sparc/kernel/sigutil_64.c
+++ b/arch/sparc/kernel/sigutil_64.c
@@ -2,6 +2,7 @@
 #include <linux/types.h>
 #include <linux/thread_info.h>
 #include <linux/uaccess.h>
+#include <linux/errno.h>
 
 #include <asm/sigcontext.h>
 #include <asm/fpumacro.h>
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 4a442c3..7560772 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -3,7 +3,7 @@
  * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index 83b47ab..12ff098 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -5,7 +5,7 @@
  * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
diff --git a/arch/sparc/kernel/stacktrace.c b/arch/sparc/kernel/stacktrace.c
index 3e08153..e78386a 100644
--- a/arch/sparc/kernel/stacktrace.c
+++ b/arch/sparc/kernel/stacktrace.c
@@ -2,7 +2,7 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <linux/ftrace.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index 170cd8e..29c478f 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -23,7 +23,6 @@
 #include <linux/uio.h>
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
-#include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/personality.h>
 #include <linux/stat.h>
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 908b47a..441521a 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -23,7 +23,7 @@
 #include <linux/ipc.h>
 #include <linux/personality.h>
 #include <linux/random.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/uaccess.h>
 #include <asm/utrap.h>
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 09d8ec4..63402f9 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns
+/*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index edbec45..db86b1a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,7 +85,7 @@
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
-	.word sys_syncfs, compat_sys_sendmmsg, sys_setns
+	.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
 
 #endif /* CONFIG_COMPAT */
 
@@ -162,4 +162,4 @@
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-	.word sys_syncfs, sys_sendmmsg, sys_setns
+	.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 1db6b18..e861072 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index c0490c7..591f20c 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -14,6 +14,7 @@
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
+#include <linux/export.h>
 
 #include <asm/delay.h>
 #include <asm/system.h>
diff --git a/arch/sparc/kernel/unaligned_32.c b/arch/sparc/kernel/unaligned_32.c
index 7efbb2f..4d043a1 100644
--- a/arch/sparc/kernel/unaligned_32.c
+++ b/arch/sparc/kernel/unaligned_32.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/system.h>
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 3cb1def..f67e28e 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/irq.h>
+#include <linux/export.h>
 #include <linux/init.h>
 
 #include <asm/mdesc.h>
diff --git a/arch/sparc/kernel/viohs.c b/arch/sparc/kernel/viohs.c
index 29348ea..f8e7dd5 100644
--- a/arch/sparc/kernel/viohs.c
+++ b/arch/sparc/kernel/viohs.c
@@ -4,7 +4,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index e3cda21..301421c 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -8,7 +8,6 @@
 obj-y                   += fault_$(BITS).o
 obj-y                   += init_$(BITS).o
 obj-$(CONFIG_SPARC32)   += loadmmu.o
-obj-y                   += generic_$(BITS).o
 obj-$(CONFIG_SPARC32)   += extable.o btfixup.o srmmu.o iommu.o io-unit.o
 obj-$(CONFIG_SPARC32)   += hypersparc.o viking.o tsunami.o swift.o
 obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index aa1c1b1..8023fd7 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -20,7 +20,6 @@
 #include <linux/smp.h>
 #include <linux/perf_event.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/kdebug.h>
 
 #include <asm/system.h>
diff --git a/arch/sparc/mm/generic_32.c b/arch/sparc/mm/generic_32.c
deleted file mode 100644
index e6067b7..0000000
--- a/arch/sparc/mm/generic_32.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
-		address += PAGE_SIZE;
-		offset += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		       unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = (offset >> PAGE_SHIFT) |
-		((unsigned long)space << 28UL);
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pmd_t *pmd = pmd_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pmd)
-			break;
-		error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/sparc/mm/generic_64.c b/arch/sparc/mm/generic_64.c
deleted file mode 100644
index 3cb00df..0000000
--- a/arch/sparc/mm/generic_64.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
-				      unsigned long address,
-				      unsigned long size,
-				      unsigned long offset, pgprot_t prot,
-				      int space)
-{
-	unsigned long end;
-
-	/* clear hack bit that was used as a write_combine side-effect flag */
-	offset &= ~0x1UL;
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		pte_t entry;
-		unsigned long curend = address + PAGE_SIZE;
-		
-		entry = mk_pte_io(offset, prot, space, PAGE_SIZE);
-		if (!(address & 0xffff)) {
-			if (PAGE_SIZE < (4 * 1024 * 1024) &&
-			    !(address & 0x3fffff) &&
-			    !(offset & 0x3ffffe) &&
-			    end >= address + 0x400000) {
-				entry = mk_pte_io(offset, prot, space,
-						  4 * 1024 * 1024);
-				curend = address + 0x400000;
-				offset += 0x400000;
-			} else if (PAGE_SIZE < (512 * 1024) &&
-				   !(address & 0x7ffff) &&
-				   !(offset & 0x7fffe) &&
-				   end >= address + 0x80000) {
-				entry = mk_pte_io(offset, prot, space,
-						  512 * 1024 * 1024);
-				curend = address + 0x80000;
-				offset += 0x80000;
-			} else if (PAGE_SIZE < (64 * 1024) &&
-				   !(offset & 0xfffe) &&
-				   end >= address + 0x10000) {
-				entry = mk_pte_io(offset, prot, space,
-						  64 * 1024);
-				curend = address + 0x10000;
-				offset += 0x10000;
-			} else
-				offset += PAGE_SIZE;
-		} else
-			offset += PAGE_SIZE;
-
-		if (pte_write(entry))
-			entry = pte_mkdirty(entry);
-		do {
-			BUG_ON(!pte_none(*pte));
-			set_pte_at(mm, address, pte, entry);
-			address += PAGE_SIZE;
-			pte_val(entry) += PAGE_SIZE;
-			pte++;
-		} while (address < curend);
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		pte_unmap(pte);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PUD_MASK;
-	end = address + size;
-	if (end > PUD_SIZE)
-		end = PUD_SIZE;
-	offset -= address;
-	do {
-		pmd_t *pmd = pmd_alloc(mm, pud, address);
-		if (!pud)
-			return -ENOMEM;
-		io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space);
-		address = (address + PUD_SIZE) & PUD_MASK;
-		pud++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-	unsigned long phys_base;
-
-	phys_base = offset | (((unsigned long) space) << 32UL);
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = phys_base >> PAGE_SHIFT;
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pud_t *pud = pud_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pud)
-			break;
-		error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/sparc/mm/highmem.c b/arch/sparc/mm/highmem.c
index 4730eac..77140a0 100644
--- a/arch/sparc/mm/highmem.c
+++ b/arch/sparc/mm/highmem.c
@@ -24,6 +24,7 @@
  */
 #include <linux/mm.h>
 #include <linux/highmem.h>
+#include <linux/export.h>
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index f4e9764..07e1453 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -5,7 +5,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
diff --git a/arch/tile/include/arch/Kbuild b/arch/tile/include/arch/Kbuild
new file mode 100644
index 0000000..9c0ea24
--- /dev/null
+++ b/arch/tile/include/arch/Kbuild
@@ -0,0 +1,17 @@
+header-y += abi.h
+header-y += chip.h
+header-y += chip_tile64.h
+header-y += chip_tilegx.h
+header-y += chip_tilepro.h
+header-y += icache.h
+header-y += interrupts.h
+header-y += interrupts_32.h
+header-y += interrupts_64.h
+header-y += opcode.h
+header-y += opcode_tilegx.h
+header-y += opcode_tilepro.h
+header-y += sim.h
+header-y += sim_def.h
+header-y += spr_def.h
+header-y += spr_def_32.h
+header-y += spr_def_64.h
diff --git a/arch/tile/include/arch/abi.h b/arch/tile/include/arch/abi.h
index 8affc76..c55a3d4 100644
--- a/arch/tile/include/arch/abi.h
+++ b/arch/tile/include/arch/abi.h
@@ -15,13 +15,78 @@
 /**
  * @file
  *
- * ABI-related register definitions helpful when writing assembly code.
+ * ABI-related register definitions.
  */
 
 #ifndef __ARCH_ABI_H__
-#define __ARCH_ABI_H__
 
-#include <arch/chip.h>
+#if !defined __need_int_reg_t && !defined __DOXYGEN__
+# define __ARCH_ABI_H__
+# include <arch/chip.h>
+#endif
+
+/* Provide the basic machine types. */
+#ifndef __INT_REG_BITS
+
+/** Number of bits in a register. */
+#if defined __tilegx__
+# define __INT_REG_BITS 64
+#elif defined __tilepro__
+# define __INT_REG_BITS 32
+#elif !defined __need_int_reg_t
+# include <arch/chip.h>
+# define __INT_REG_BITS CHIP_WORD_SIZE()
+#else
+# error Unrecognized architecture with __need_int_reg_t
+#endif
+
+#if __INT_REG_BITS == 64
+
+#ifndef __ASSEMBLER__
+/** Unsigned type that can hold a register. */
+typedef unsigned long long __uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long long __int_reg_t;
+#endif
+
+/** String prefix to use for printf(). */
+#define __INT_REG_FMT "ll"
+
+#else
+
+#ifndef __ASSEMBLER__
+/** Unsigned type that can hold a register. */
+typedef unsigned long __uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long __int_reg_t;
+#endif
+
+/** String prefix to use for printf(). */
+#define __INT_REG_FMT "l"
+
+#endif
+#endif /* __INT_REG_BITS */
+
+
+#ifndef __need_int_reg_t
+
+
+#ifndef __ASSEMBLER__
+/** Unsigned type that can hold a register. */
+typedef __uint_reg_t uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef __int_reg_t int_reg_t;
+#endif
+
+/** String prefix to use for printf(). */
+#define INT_REG_FMT __INT_REG_FMT
+
+/** Number of bits in a register. */
+#define INT_REG_BITS __INT_REG_BITS
+
 
 /* Registers 0 - 55 are "normal", but some perform special roles. */
 
@@ -59,7 +124,7 @@
  * The ABI requires callers to allocate a caller state save area of
  * this many bytes at the bottom of each stack frame.
  */
-#define C_ABI_SAVE_AREA_SIZE (2 * (CHIP_WORD_SIZE() / 8))
+#define C_ABI_SAVE_AREA_SIZE (2 * (INT_REG_BITS / 8))
 
 /**
  * The operand to an 'info' opcode directing the backtracer to not
@@ -67,30 +132,10 @@
  */
 #define INFO_OP_CANNOT_BACKTRACE 2
 
-#ifndef __ASSEMBLER__
-#if CHIP_WORD_SIZE() > 32
 
-/** Unsigned type that can hold a register. */
-typedef unsigned long long uint_reg_t;
+#endif /* !__need_int_reg_t */
 
-/** Signed type that can hold a register. */
-typedef long long int_reg_t;
-
-/** String prefix to use for printf(). */
-#define INT_REG_FMT "ll"
-
-#elif !defined(__LP64__)   /* avoid confusion with LP64 cross-build tools */
-
-/** Unsigned type that can hold a register. */
-typedef unsigned long uint_reg_t;
-
-/** Signed type that can hold a register. */
-typedef long int_reg_t;
-
-/** String prefix to use for printf(). */
-#define INT_REG_FMT "l"
-
-#endif
-#endif /* __ASSEMBLER__ */
+/* Make sure we later can get all the definitions and declarations.  */
+#undef __need_int_reg_t
 
 #endif /* !__ARCH_ABI_H__ */
diff --git a/arch/tile/include/asm/opcode_constants.h b/arch/tile/include/arch/opcode.h
similarity index 62%
copy from arch/tile/include/asm/opcode_constants.h
copy to arch/tile/include/arch/opcode.h
index 37a9f29..92d1522 100644
--- a/arch/tile/include/asm/opcode_constants.h
+++ b/arch/tile/include/arch/opcode.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -12,15 +12,10 @@
  *   more details.
  */
 
-#ifndef _ASM_TILE_OPCODE_CONSTANTS_H
-#define _ASM_TILE_OPCODE_CONSTANTS_H
-
-#include <arch/chip.h>
-
-#if CHIP_WORD_SIZE() == 64
-#include <asm/opcode_constants_64.h>
+#if defined(__tilepro__)
+#include <arch/opcode_tilepro.h>
+#elif defined(__tilegx__)
+#include <arch/opcode_tilegx.h>
 #else
-#include <asm/opcode_constants_32.h>
+#error Unexpected Tilera chip type
 #endif
-
-#endif /* _ASM_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/arch/opcode_tilegx.h b/arch/tile/include/arch/opcode_tilegx.h
new file mode 100644
index 0000000..c14d02c
--- /dev/null
+++ b/arch/tile/include/arch/opcode_tilegx.h
@@ -0,0 +1,1405 @@
+/* TILE-Gx opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
+#ifndef __ARCH_OPCODE_H__
+#define __ARCH_OPCODE_H__
+
+#ifndef __ASSEMBLER__
+
+typedef unsigned long long tilegx_bundle_bits;
+
+/* These are the bits that determine if a bundle is in the X encoding. */
+#define TILEGX_BUNDLE_MODE_MASK ((tilegx_bundle_bits)3 << 62)
+
+enum
+{
+  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+  TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+  TILEGX_NUM_PIPELINE_ENCODINGS = 5,
+
+  /* Log base 2 of TILEGX_BUNDLE_SIZE_IN_BYTES. */
+  TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+  /* Instructions take this many bytes. */
+  TILEGX_BUNDLE_SIZE_IN_BYTES = 1 << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+  /* Log base 2 of TILEGX_BUNDLE_ALIGNMENT_IN_BYTES. */
+  TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+  /* Bundles should be aligned modulo this number of bytes. */
+  TILEGX_BUNDLE_ALIGNMENT_IN_BYTES =
+    (1 << TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+  /* Number of registers (some are magic, such as network I/O). */
+  TILEGX_NUM_REGISTERS = 64,
+};
+
+/* Make a few "tile_" variables to simplify common code between
+   architectures.  */
+
+typedef tilegx_bundle_bits tile_bundle_bits;
+#define TILE_BUNDLE_SIZE_IN_BYTES TILEGX_BUNDLE_SIZE_IN_BYTES
+#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES
+#define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \
+  TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL
+
+static __inline unsigned int
+get_BFEnd_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_BFOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 24)) & 0xf);
+}
+
+static __inline unsigned int
+get_BFStart_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3f);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x0001ffc0);
+}
+
+static __inline unsigned int
+get_BrType_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8OpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8OpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_JumpOff_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x7ffffff);
+}
+
+static __inline unsigned int
+get_JumpOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_MF_Imm14_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3fff);
+}
+
+static __inline unsigned int
+get_MT_Imm14_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x00003fc0);
+}
+
+static __inline unsigned int
+get_Mode(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 62)) & 0x3);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tilegx_bundle_bits n)
+{
+  return (((n >> 26)) & 0x00000001) |
+         (((unsigned int)(n >> 56)) & 0x00000002);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_ShiftOpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_X0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_X1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_Y0(tilegx_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_UnaryOpcodeExtension_Y1(tilegx_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+  int shift = (int)(sizeof(int) * 8 - num_bits);
+  return (n << shift) >> shift;
+}
+
+
+
+static __inline tilegx_bundle_bits
+create_BFEnd_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_BFOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 24);
+}
+
+static __inline tilegx_bundle_bits
+create_BFStart_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_BrOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x0001ffc0)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_BrType_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilegx_bundle_bits
+create_Dest_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm16_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xffff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm16_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8OpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 20);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8OpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 51);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_Imm8_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_JumpOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x7ffffff)) << 31);
+}
+
+static __inline tilegx_bundle_bits
+create_JumpOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tilegx_bundle_bits
+create_MF_Imm14_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3fff)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_MT_Imm14_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilegx_bundle_bits)(n & 0x00003fc0)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_Mode(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 62);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 28);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x7)) << 59);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 27);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0xf)) << 58);
+}
+
+static __inline tilegx_bundle_bits
+create_Opcode_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x00000001) << 26) |
+         (((tilegx_bundle_bits)(n & 0x00000002)) << 56);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_ShAmt_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tilegx_bundle_bits
+create_ShiftOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcA_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 20);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 51);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_SrcB_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilegx_bundle_bits
+create_UnaryOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
+}
+
+
+enum
+{
+  ADDI_IMM8_OPCODE_X0 = 1,
+  ADDI_IMM8_OPCODE_X1 = 1,
+  ADDI_OPCODE_Y0 = 0,
+  ADDI_OPCODE_Y1 = 1,
+  ADDLI_OPCODE_X0 = 1,
+  ADDLI_OPCODE_X1 = 0,
+  ADDXI_IMM8_OPCODE_X0 = 2,
+  ADDXI_IMM8_OPCODE_X1 = 2,
+  ADDXI_OPCODE_Y0 = 1,
+  ADDXI_OPCODE_Y1 = 2,
+  ADDXLI_OPCODE_X0 = 2,
+  ADDXLI_OPCODE_X1 = 1,
+  ADDXSC_RRR_0_OPCODE_X0 = 1,
+  ADDXSC_RRR_0_OPCODE_X1 = 1,
+  ADDX_RRR_0_OPCODE_X0 = 2,
+  ADDX_RRR_0_OPCODE_X1 = 2,
+  ADDX_RRR_0_OPCODE_Y0 = 0,
+  ADDX_SPECIAL_0_OPCODE_Y1 = 0,
+  ADD_RRR_0_OPCODE_X0 = 3,
+  ADD_RRR_0_OPCODE_X1 = 3,
+  ADD_RRR_0_OPCODE_Y0 = 1,
+  ADD_SPECIAL_0_OPCODE_Y1 = 1,
+  ANDI_IMM8_OPCODE_X0 = 3,
+  ANDI_IMM8_OPCODE_X1 = 3,
+  ANDI_OPCODE_Y0 = 2,
+  ANDI_OPCODE_Y1 = 3,
+  AND_RRR_0_OPCODE_X0 = 4,
+  AND_RRR_0_OPCODE_X1 = 4,
+  AND_RRR_5_OPCODE_Y0 = 0,
+  AND_RRR_5_OPCODE_Y1 = 0,
+  BEQZT_BRANCH_OPCODE_X1 = 16,
+  BEQZ_BRANCH_OPCODE_X1 = 17,
+  BFEXTS_BF_OPCODE_X0 = 4,
+  BFEXTU_BF_OPCODE_X0 = 5,
+  BFINS_BF_OPCODE_X0 = 6,
+  BF_OPCODE_X0 = 3,
+  BGEZT_BRANCH_OPCODE_X1 = 18,
+  BGEZ_BRANCH_OPCODE_X1 = 19,
+  BGTZT_BRANCH_OPCODE_X1 = 20,
+  BGTZ_BRANCH_OPCODE_X1 = 21,
+  BLBCT_BRANCH_OPCODE_X1 = 22,
+  BLBC_BRANCH_OPCODE_X1 = 23,
+  BLBST_BRANCH_OPCODE_X1 = 24,
+  BLBS_BRANCH_OPCODE_X1 = 25,
+  BLEZT_BRANCH_OPCODE_X1 = 26,
+  BLEZ_BRANCH_OPCODE_X1 = 27,
+  BLTZT_BRANCH_OPCODE_X1 = 28,
+  BLTZ_BRANCH_OPCODE_X1 = 29,
+  BNEZT_BRANCH_OPCODE_X1 = 30,
+  BNEZ_BRANCH_OPCODE_X1 = 31,
+  BRANCH_OPCODE_X1 = 2,
+  CMOVEQZ_RRR_0_OPCODE_X0 = 5,
+  CMOVEQZ_RRR_4_OPCODE_Y0 = 0,
+  CMOVNEZ_RRR_0_OPCODE_X0 = 6,
+  CMOVNEZ_RRR_4_OPCODE_Y0 = 1,
+  CMPEQI_IMM8_OPCODE_X0 = 4,
+  CMPEQI_IMM8_OPCODE_X1 = 4,
+  CMPEQI_OPCODE_Y0 = 3,
+  CMPEQI_OPCODE_Y1 = 4,
+  CMPEQ_RRR_0_OPCODE_X0 = 7,
+  CMPEQ_RRR_0_OPCODE_X1 = 5,
+  CMPEQ_RRR_3_OPCODE_Y0 = 0,
+  CMPEQ_RRR_3_OPCODE_Y1 = 2,
+  CMPEXCH4_RRR_0_OPCODE_X1 = 6,
+  CMPEXCH_RRR_0_OPCODE_X1 = 7,
+  CMPLES_RRR_0_OPCODE_X0 = 8,
+  CMPLES_RRR_0_OPCODE_X1 = 8,
+  CMPLES_RRR_2_OPCODE_Y0 = 0,
+  CMPLES_RRR_2_OPCODE_Y1 = 0,
+  CMPLEU_RRR_0_OPCODE_X0 = 9,
+  CMPLEU_RRR_0_OPCODE_X1 = 9,
+  CMPLEU_RRR_2_OPCODE_Y0 = 1,
+  CMPLEU_RRR_2_OPCODE_Y1 = 1,
+  CMPLTSI_IMM8_OPCODE_X0 = 5,
+  CMPLTSI_IMM8_OPCODE_X1 = 5,
+  CMPLTSI_OPCODE_Y0 = 4,
+  CMPLTSI_OPCODE_Y1 = 5,
+  CMPLTS_RRR_0_OPCODE_X0 = 10,
+  CMPLTS_RRR_0_OPCODE_X1 = 10,
+  CMPLTS_RRR_2_OPCODE_Y0 = 2,
+  CMPLTS_RRR_2_OPCODE_Y1 = 2,
+  CMPLTUI_IMM8_OPCODE_X0 = 6,
+  CMPLTUI_IMM8_OPCODE_X1 = 6,
+  CMPLTU_RRR_0_OPCODE_X0 = 11,
+  CMPLTU_RRR_0_OPCODE_X1 = 11,
+  CMPLTU_RRR_2_OPCODE_Y0 = 3,
+  CMPLTU_RRR_2_OPCODE_Y1 = 3,
+  CMPNE_RRR_0_OPCODE_X0 = 12,
+  CMPNE_RRR_0_OPCODE_X1 = 12,
+  CMPNE_RRR_3_OPCODE_Y0 = 1,
+  CMPNE_RRR_3_OPCODE_Y1 = 3,
+  CMULAF_RRR_0_OPCODE_X0 = 13,
+  CMULA_RRR_0_OPCODE_X0 = 14,
+  CMULFR_RRR_0_OPCODE_X0 = 15,
+  CMULF_RRR_0_OPCODE_X0 = 16,
+  CMULHR_RRR_0_OPCODE_X0 = 17,
+  CMULH_RRR_0_OPCODE_X0 = 18,
+  CMUL_RRR_0_OPCODE_X0 = 19,
+  CNTLZ_UNARY_OPCODE_X0 = 1,
+  CNTLZ_UNARY_OPCODE_Y0 = 1,
+  CNTTZ_UNARY_OPCODE_X0 = 2,
+  CNTTZ_UNARY_OPCODE_Y0 = 2,
+  CRC32_32_RRR_0_OPCODE_X0 = 20,
+  CRC32_8_RRR_0_OPCODE_X0 = 21,
+  DBLALIGN2_RRR_0_OPCODE_X0 = 22,
+  DBLALIGN2_RRR_0_OPCODE_X1 = 13,
+  DBLALIGN4_RRR_0_OPCODE_X0 = 23,
+  DBLALIGN4_RRR_0_OPCODE_X1 = 14,
+  DBLALIGN6_RRR_0_OPCODE_X0 = 24,
+  DBLALIGN6_RRR_0_OPCODE_X1 = 15,
+  DBLALIGN_RRR_0_OPCODE_X0 = 25,
+  DRAIN_UNARY_OPCODE_X1 = 1,
+  DTLBPR_UNARY_OPCODE_X1 = 2,
+  EXCH4_RRR_0_OPCODE_X1 = 16,
+  EXCH_RRR_0_OPCODE_X1 = 17,
+  FDOUBLE_ADDSUB_RRR_0_OPCODE_X0 = 26,
+  FDOUBLE_ADD_FLAGS_RRR_0_OPCODE_X0 = 27,
+  FDOUBLE_MUL_FLAGS_RRR_0_OPCODE_X0 = 28,
+  FDOUBLE_PACK1_RRR_0_OPCODE_X0 = 29,
+  FDOUBLE_PACK2_RRR_0_OPCODE_X0 = 30,
+  FDOUBLE_SUB_FLAGS_RRR_0_OPCODE_X0 = 31,
+  FDOUBLE_UNPACK_MAX_RRR_0_OPCODE_X0 = 32,
+  FDOUBLE_UNPACK_MIN_RRR_0_OPCODE_X0 = 33,
+  FETCHADD4_RRR_0_OPCODE_X1 = 18,
+  FETCHADDGEZ4_RRR_0_OPCODE_X1 = 19,
+  FETCHADDGEZ_RRR_0_OPCODE_X1 = 20,
+  FETCHADD_RRR_0_OPCODE_X1 = 21,
+  FETCHAND4_RRR_0_OPCODE_X1 = 22,
+  FETCHAND_RRR_0_OPCODE_X1 = 23,
+  FETCHOR4_RRR_0_OPCODE_X1 = 24,
+  FETCHOR_RRR_0_OPCODE_X1 = 25,
+  FINV_UNARY_OPCODE_X1 = 3,
+  FLUSHWB_UNARY_OPCODE_X1 = 4,
+  FLUSH_UNARY_OPCODE_X1 = 5,
+  FNOP_UNARY_OPCODE_X0 = 3,
+  FNOP_UNARY_OPCODE_X1 = 6,
+  FNOP_UNARY_OPCODE_Y0 = 3,
+  FNOP_UNARY_OPCODE_Y1 = 8,
+  FSINGLE_ADD1_RRR_0_OPCODE_X0 = 34,
+  FSINGLE_ADDSUB2_RRR_0_OPCODE_X0 = 35,
+  FSINGLE_MUL1_RRR_0_OPCODE_X0 = 36,
+  FSINGLE_MUL2_RRR_0_OPCODE_X0 = 37,
+  FSINGLE_PACK1_UNARY_OPCODE_X0 = 4,
+  FSINGLE_PACK1_UNARY_OPCODE_Y0 = 4,
+  FSINGLE_PACK2_RRR_0_OPCODE_X0 = 38,
+  FSINGLE_SUB1_RRR_0_OPCODE_X0 = 39,
+  ICOH_UNARY_OPCODE_X1 = 7,
+  ILL_UNARY_OPCODE_X1 = 8,
+  ILL_UNARY_OPCODE_Y1 = 9,
+  IMM8_OPCODE_X0 = 4,
+  IMM8_OPCODE_X1 = 3,
+  INV_UNARY_OPCODE_X1 = 9,
+  IRET_UNARY_OPCODE_X1 = 10,
+  JALRP_UNARY_OPCODE_X1 = 11,
+  JALRP_UNARY_OPCODE_Y1 = 10,
+  JALR_UNARY_OPCODE_X1 = 12,
+  JALR_UNARY_OPCODE_Y1 = 11,
+  JAL_JUMP_OPCODE_X1 = 0,
+  JRP_UNARY_OPCODE_X1 = 13,
+  JRP_UNARY_OPCODE_Y1 = 12,
+  JR_UNARY_OPCODE_X1 = 14,
+  JR_UNARY_OPCODE_Y1 = 13,
+  JUMP_OPCODE_X1 = 4,
+  J_JUMP_OPCODE_X1 = 1,
+  LD1S_ADD_IMM8_OPCODE_X1 = 7,
+  LD1S_OPCODE_Y2 = 0,
+  LD1S_UNARY_OPCODE_X1 = 15,
+  LD1U_ADD_IMM8_OPCODE_X1 = 8,
+  LD1U_OPCODE_Y2 = 1,
+  LD1U_UNARY_OPCODE_X1 = 16,
+  LD2S_ADD_IMM8_OPCODE_X1 = 9,
+  LD2S_OPCODE_Y2 = 2,
+  LD2S_UNARY_OPCODE_X1 = 17,
+  LD2U_ADD_IMM8_OPCODE_X1 = 10,
+  LD2U_OPCODE_Y2 = 3,
+  LD2U_UNARY_OPCODE_X1 = 18,
+  LD4S_ADD_IMM8_OPCODE_X1 = 11,
+  LD4S_OPCODE_Y2 = 1,
+  LD4S_UNARY_OPCODE_X1 = 19,
+  LD4U_ADD_IMM8_OPCODE_X1 = 12,
+  LD4U_OPCODE_Y2 = 2,
+  LD4U_UNARY_OPCODE_X1 = 20,
+  LDNA_UNARY_OPCODE_X1 = 21,
+  LDNT1S_ADD_IMM8_OPCODE_X1 = 13,
+  LDNT1S_UNARY_OPCODE_X1 = 22,
+  LDNT1U_ADD_IMM8_OPCODE_X1 = 14,
+  LDNT1U_UNARY_OPCODE_X1 = 23,
+  LDNT2S_ADD_IMM8_OPCODE_X1 = 15,
+  LDNT2S_UNARY_OPCODE_X1 = 24,
+  LDNT2U_ADD_IMM8_OPCODE_X1 = 16,
+  LDNT2U_UNARY_OPCODE_X1 = 25,
+  LDNT4S_ADD_IMM8_OPCODE_X1 = 17,
+  LDNT4S_UNARY_OPCODE_X1 = 26,
+  LDNT4U_ADD_IMM8_OPCODE_X1 = 18,
+  LDNT4U_UNARY_OPCODE_X1 = 27,
+  LDNT_ADD_IMM8_OPCODE_X1 = 19,
+  LDNT_UNARY_OPCODE_X1 = 28,
+  LD_ADD_IMM8_OPCODE_X1 = 20,
+  LD_OPCODE_Y2 = 3,
+  LD_UNARY_OPCODE_X1 = 29,
+  LNK_UNARY_OPCODE_X1 = 30,
+  LNK_UNARY_OPCODE_Y1 = 14,
+  LWNA_ADD_IMM8_OPCODE_X1 = 21,
+  MFSPR_IMM8_OPCODE_X1 = 22,
+  MF_UNARY_OPCODE_X1 = 31,
+  MM_BF_OPCODE_X0 = 7,
+  MNZ_RRR_0_OPCODE_X0 = 40,
+  MNZ_RRR_0_OPCODE_X1 = 26,
+  MNZ_RRR_4_OPCODE_Y0 = 2,
+  MNZ_RRR_4_OPCODE_Y1 = 2,
+  MODE_OPCODE_YA2 = 1,
+  MODE_OPCODE_YB2 = 2,
+  MODE_OPCODE_YC2 = 3,
+  MTSPR_IMM8_OPCODE_X1 = 23,
+  MULAX_RRR_0_OPCODE_X0 = 41,
+  MULAX_RRR_3_OPCODE_Y0 = 2,
+  MULA_HS_HS_RRR_0_OPCODE_X0 = 42,
+  MULA_HS_HS_RRR_9_OPCODE_Y0 = 0,
+  MULA_HS_HU_RRR_0_OPCODE_X0 = 43,
+  MULA_HS_LS_RRR_0_OPCODE_X0 = 44,
+  MULA_HS_LU_RRR_0_OPCODE_X0 = 45,
+  MULA_HU_HU_RRR_0_OPCODE_X0 = 46,
+  MULA_HU_HU_RRR_9_OPCODE_Y0 = 1,
+  MULA_HU_LS_RRR_0_OPCODE_X0 = 47,
+  MULA_HU_LU_RRR_0_OPCODE_X0 = 48,
+  MULA_LS_LS_RRR_0_OPCODE_X0 = 49,
+  MULA_LS_LS_RRR_9_OPCODE_Y0 = 2,
+  MULA_LS_LU_RRR_0_OPCODE_X0 = 50,
+  MULA_LU_LU_RRR_0_OPCODE_X0 = 51,
+  MULA_LU_LU_RRR_9_OPCODE_Y0 = 3,
+  MULX_RRR_0_OPCODE_X0 = 52,
+  MULX_RRR_3_OPCODE_Y0 = 3,
+  MUL_HS_HS_RRR_0_OPCODE_X0 = 53,
+  MUL_HS_HS_RRR_8_OPCODE_Y0 = 0,
+  MUL_HS_HU_RRR_0_OPCODE_X0 = 54,
+  MUL_HS_LS_RRR_0_OPCODE_X0 = 55,
+  MUL_HS_LU_RRR_0_OPCODE_X0 = 56,
+  MUL_HU_HU_RRR_0_OPCODE_X0 = 57,
+  MUL_HU_HU_RRR_8_OPCODE_Y0 = 1,
+  MUL_HU_LS_RRR_0_OPCODE_X0 = 58,
+  MUL_HU_LU_RRR_0_OPCODE_X0 = 59,
+  MUL_LS_LS_RRR_0_OPCODE_X0 = 60,
+  MUL_LS_LS_RRR_8_OPCODE_Y0 = 2,
+  MUL_LS_LU_RRR_0_OPCODE_X0 = 61,
+  MUL_LU_LU_RRR_0_OPCODE_X0 = 62,
+  MUL_LU_LU_RRR_8_OPCODE_Y0 = 3,
+  MZ_RRR_0_OPCODE_X0 = 63,
+  MZ_RRR_0_OPCODE_X1 = 27,
+  MZ_RRR_4_OPCODE_Y0 = 3,
+  MZ_RRR_4_OPCODE_Y1 = 3,
+  NAP_UNARY_OPCODE_X1 = 32,
+  NOP_UNARY_OPCODE_X0 = 5,
+  NOP_UNARY_OPCODE_X1 = 33,
+  NOP_UNARY_OPCODE_Y0 = 5,
+  NOP_UNARY_OPCODE_Y1 = 15,
+  NOR_RRR_0_OPCODE_X0 = 64,
+  NOR_RRR_0_OPCODE_X1 = 28,
+  NOR_RRR_5_OPCODE_Y0 = 1,
+  NOR_RRR_5_OPCODE_Y1 = 1,
+  ORI_IMM8_OPCODE_X0 = 7,
+  ORI_IMM8_OPCODE_X1 = 24,
+  OR_RRR_0_OPCODE_X0 = 65,
+  OR_RRR_0_OPCODE_X1 = 29,
+  OR_RRR_5_OPCODE_Y0 = 2,
+  OR_RRR_5_OPCODE_Y1 = 2,
+  PCNT_UNARY_OPCODE_X0 = 6,
+  PCNT_UNARY_OPCODE_Y0 = 6,
+  REVBITS_UNARY_OPCODE_X0 = 7,
+  REVBITS_UNARY_OPCODE_Y0 = 7,
+  REVBYTES_UNARY_OPCODE_X0 = 8,
+  REVBYTES_UNARY_OPCODE_Y0 = 8,
+  ROTLI_SHIFT_OPCODE_X0 = 1,
+  ROTLI_SHIFT_OPCODE_X1 = 1,
+  ROTLI_SHIFT_OPCODE_Y0 = 0,
+  ROTLI_SHIFT_OPCODE_Y1 = 0,
+  ROTL_RRR_0_OPCODE_X0 = 66,
+  ROTL_RRR_0_OPCODE_X1 = 30,
+  ROTL_RRR_6_OPCODE_Y0 = 0,
+  ROTL_RRR_6_OPCODE_Y1 = 0,
+  RRR_0_OPCODE_X0 = 5,
+  RRR_0_OPCODE_X1 = 5,
+  RRR_0_OPCODE_Y0 = 5,
+  RRR_0_OPCODE_Y1 = 6,
+  RRR_1_OPCODE_Y0 = 6,
+  RRR_1_OPCODE_Y1 = 7,
+  RRR_2_OPCODE_Y0 = 7,
+  RRR_2_OPCODE_Y1 = 8,
+  RRR_3_OPCODE_Y0 = 8,
+  RRR_3_OPCODE_Y1 = 9,
+  RRR_4_OPCODE_Y0 = 9,
+  RRR_4_OPCODE_Y1 = 10,
+  RRR_5_OPCODE_Y0 = 10,
+  RRR_5_OPCODE_Y1 = 11,
+  RRR_6_OPCODE_Y0 = 11,
+  RRR_6_OPCODE_Y1 = 12,
+  RRR_7_OPCODE_Y0 = 12,
+  RRR_7_OPCODE_Y1 = 13,
+  RRR_8_OPCODE_Y0 = 13,
+  RRR_9_OPCODE_Y0 = 14,
+  SHIFT_OPCODE_X0 = 6,
+  SHIFT_OPCODE_X1 = 6,
+  SHIFT_OPCODE_Y0 = 15,
+  SHIFT_OPCODE_Y1 = 14,
+  SHL16INSLI_OPCODE_X0 = 7,
+  SHL16INSLI_OPCODE_X1 = 7,
+  SHL1ADDX_RRR_0_OPCODE_X0 = 67,
+  SHL1ADDX_RRR_0_OPCODE_X1 = 31,
+  SHL1ADDX_RRR_7_OPCODE_Y0 = 1,
+  SHL1ADDX_RRR_7_OPCODE_Y1 = 1,
+  SHL1ADD_RRR_0_OPCODE_X0 = 68,
+  SHL1ADD_RRR_0_OPCODE_X1 = 32,
+  SHL1ADD_RRR_1_OPCODE_Y0 = 0,
+  SHL1ADD_RRR_1_OPCODE_Y1 = 0,
+  SHL2ADDX_RRR_0_OPCODE_X0 = 69,
+  SHL2ADDX_RRR_0_OPCODE_X1 = 33,
+  SHL2ADDX_RRR_7_OPCODE_Y0 = 2,
+  SHL2ADDX_RRR_7_OPCODE_Y1 = 2,
+  SHL2ADD_RRR_0_OPCODE_X0 = 70,
+  SHL2ADD_RRR_0_OPCODE_X1 = 34,
+  SHL2ADD_RRR_1_OPCODE_Y0 = 1,
+  SHL2ADD_RRR_1_OPCODE_Y1 = 1,
+  SHL3ADDX_RRR_0_OPCODE_X0 = 71,
+  SHL3ADDX_RRR_0_OPCODE_X1 = 35,
+  SHL3ADDX_RRR_7_OPCODE_Y0 = 3,
+  SHL3ADDX_RRR_7_OPCODE_Y1 = 3,
+  SHL3ADD_RRR_0_OPCODE_X0 = 72,
+  SHL3ADD_RRR_0_OPCODE_X1 = 36,
+  SHL3ADD_RRR_1_OPCODE_Y0 = 2,
+  SHL3ADD_RRR_1_OPCODE_Y1 = 2,
+  SHLI_SHIFT_OPCODE_X0 = 2,
+  SHLI_SHIFT_OPCODE_X1 = 2,
+  SHLI_SHIFT_OPCODE_Y0 = 1,
+  SHLI_SHIFT_OPCODE_Y1 = 1,
+  SHLXI_SHIFT_OPCODE_X0 = 3,
+  SHLXI_SHIFT_OPCODE_X1 = 3,
+  SHLX_RRR_0_OPCODE_X0 = 73,
+  SHLX_RRR_0_OPCODE_X1 = 37,
+  SHL_RRR_0_OPCODE_X0 = 74,
+  SHL_RRR_0_OPCODE_X1 = 38,
+  SHL_RRR_6_OPCODE_Y0 = 1,
+  SHL_RRR_6_OPCODE_Y1 = 1,
+  SHRSI_SHIFT_OPCODE_X0 = 4,
+  SHRSI_SHIFT_OPCODE_X1 = 4,
+  SHRSI_SHIFT_OPCODE_Y0 = 2,
+  SHRSI_SHIFT_OPCODE_Y1 = 2,
+  SHRS_RRR_0_OPCODE_X0 = 75,
+  SHRS_RRR_0_OPCODE_X1 = 39,
+  SHRS_RRR_6_OPCODE_Y0 = 2,
+  SHRS_RRR_6_OPCODE_Y1 = 2,
+  SHRUI_SHIFT_OPCODE_X0 = 5,
+  SHRUI_SHIFT_OPCODE_X1 = 5,
+  SHRUI_SHIFT_OPCODE_Y0 = 3,
+  SHRUI_SHIFT_OPCODE_Y1 = 3,
+  SHRUXI_SHIFT_OPCODE_X0 = 6,
+  SHRUXI_SHIFT_OPCODE_X1 = 6,
+  SHRUX_RRR_0_OPCODE_X0 = 76,
+  SHRUX_RRR_0_OPCODE_X1 = 40,
+  SHRU_RRR_0_OPCODE_X0 = 77,
+  SHRU_RRR_0_OPCODE_X1 = 41,
+  SHRU_RRR_6_OPCODE_Y0 = 3,
+  SHRU_RRR_6_OPCODE_Y1 = 3,
+  SHUFFLEBYTES_RRR_0_OPCODE_X0 = 78,
+  ST1_ADD_IMM8_OPCODE_X1 = 25,
+  ST1_OPCODE_Y2 = 0,
+  ST1_RRR_0_OPCODE_X1 = 42,
+  ST2_ADD_IMM8_OPCODE_X1 = 26,
+  ST2_OPCODE_Y2 = 1,
+  ST2_RRR_0_OPCODE_X1 = 43,
+  ST4_ADD_IMM8_OPCODE_X1 = 27,
+  ST4_OPCODE_Y2 = 2,
+  ST4_RRR_0_OPCODE_X1 = 44,
+  STNT1_ADD_IMM8_OPCODE_X1 = 28,
+  STNT1_RRR_0_OPCODE_X1 = 45,
+  STNT2_ADD_IMM8_OPCODE_X1 = 29,
+  STNT2_RRR_0_OPCODE_X1 = 46,
+  STNT4_ADD_IMM8_OPCODE_X1 = 30,
+  STNT4_RRR_0_OPCODE_X1 = 47,
+  STNT_ADD_IMM8_OPCODE_X1 = 31,
+  STNT_RRR_0_OPCODE_X1 = 48,
+  ST_ADD_IMM8_OPCODE_X1 = 32,
+  ST_OPCODE_Y2 = 3,
+  ST_RRR_0_OPCODE_X1 = 49,
+  SUBXSC_RRR_0_OPCODE_X0 = 79,
+  SUBXSC_RRR_0_OPCODE_X1 = 50,
+  SUBX_RRR_0_OPCODE_X0 = 80,
+  SUBX_RRR_0_OPCODE_X1 = 51,
+  SUBX_RRR_0_OPCODE_Y0 = 2,
+  SUBX_RRR_0_OPCODE_Y1 = 2,
+  SUB_RRR_0_OPCODE_X0 = 81,
+  SUB_RRR_0_OPCODE_X1 = 52,
+  SUB_RRR_0_OPCODE_Y0 = 3,
+  SUB_RRR_0_OPCODE_Y1 = 3,
+  SWINT0_UNARY_OPCODE_X1 = 34,
+  SWINT1_UNARY_OPCODE_X1 = 35,
+  SWINT2_UNARY_OPCODE_X1 = 36,
+  SWINT3_UNARY_OPCODE_X1 = 37,
+  TBLIDXB0_UNARY_OPCODE_X0 = 9,
+  TBLIDXB0_UNARY_OPCODE_Y0 = 9,
+  TBLIDXB1_UNARY_OPCODE_X0 = 10,
+  TBLIDXB1_UNARY_OPCODE_Y0 = 10,
+  TBLIDXB2_UNARY_OPCODE_X0 = 11,
+  TBLIDXB2_UNARY_OPCODE_Y0 = 11,
+  TBLIDXB3_UNARY_OPCODE_X0 = 12,
+  TBLIDXB3_UNARY_OPCODE_Y0 = 12,
+  UNARY_RRR_0_OPCODE_X0 = 82,
+  UNARY_RRR_0_OPCODE_X1 = 53,
+  UNARY_RRR_1_OPCODE_Y0 = 3,
+  UNARY_RRR_1_OPCODE_Y1 = 3,
+  V1ADDI_IMM8_OPCODE_X0 = 8,
+  V1ADDI_IMM8_OPCODE_X1 = 33,
+  V1ADDUC_RRR_0_OPCODE_X0 = 83,
+  V1ADDUC_RRR_0_OPCODE_X1 = 54,
+  V1ADD_RRR_0_OPCODE_X0 = 84,
+  V1ADD_RRR_0_OPCODE_X1 = 55,
+  V1ADIFFU_RRR_0_OPCODE_X0 = 85,
+  V1AVGU_RRR_0_OPCODE_X0 = 86,
+  V1CMPEQI_IMM8_OPCODE_X0 = 9,
+  V1CMPEQI_IMM8_OPCODE_X1 = 34,
+  V1CMPEQ_RRR_0_OPCODE_X0 = 87,
+  V1CMPEQ_RRR_0_OPCODE_X1 = 56,
+  V1CMPLES_RRR_0_OPCODE_X0 = 88,
+  V1CMPLES_RRR_0_OPCODE_X1 = 57,
+  V1CMPLEU_RRR_0_OPCODE_X0 = 89,
+  V1CMPLEU_RRR_0_OPCODE_X1 = 58,
+  V1CMPLTSI_IMM8_OPCODE_X0 = 10,
+  V1CMPLTSI_IMM8_OPCODE_X1 = 35,
+  V1CMPLTS_RRR_0_OPCODE_X0 = 90,
+  V1CMPLTS_RRR_0_OPCODE_X1 = 59,
+  V1CMPLTUI_IMM8_OPCODE_X0 = 11,
+  V1CMPLTUI_IMM8_OPCODE_X1 = 36,
+  V1CMPLTU_RRR_0_OPCODE_X0 = 91,
+  V1CMPLTU_RRR_0_OPCODE_X1 = 60,
+  V1CMPNE_RRR_0_OPCODE_X0 = 92,
+  V1CMPNE_RRR_0_OPCODE_X1 = 61,
+  V1DDOTPUA_RRR_0_OPCODE_X0 = 161,
+  V1DDOTPUSA_RRR_0_OPCODE_X0 = 93,
+  V1DDOTPUS_RRR_0_OPCODE_X0 = 94,
+  V1DDOTPU_RRR_0_OPCODE_X0 = 162,
+  V1DOTPA_RRR_0_OPCODE_X0 = 95,
+  V1DOTPUA_RRR_0_OPCODE_X0 = 163,
+  V1DOTPUSA_RRR_0_OPCODE_X0 = 96,
+  V1DOTPUS_RRR_0_OPCODE_X0 = 97,
+  V1DOTPU_RRR_0_OPCODE_X0 = 164,
+  V1DOTP_RRR_0_OPCODE_X0 = 98,
+  V1INT_H_RRR_0_OPCODE_X0 = 99,
+  V1INT_H_RRR_0_OPCODE_X1 = 62,
+  V1INT_L_RRR_0_OPCODE_X0 = 100,
+  V1INT_L_RRR_0_OPCODE_X1 = 63,
+  V1MAXUI_IMM8_OPCODE_X0 = 12,
+  V1MAXUI_IMM8_OPCODE_X1 = 37,
+  V1MAXU_RRR_0_OPCODE_X0 = 101,
+  V1MAXU_RRR_0_OPCODE_X1 = 64,
+  V1MINUI_IMM8_OPCODE_X0 = 13,
+  V1MINUI_IMM8_OPCODE_X1 = 38,
+  V1MINU_RRR_0_OPCODE_X0 = 102,
+  V1MINU_RRR_0_OPCODE_X1 = 65,
+  V1MNZ_RRR_0_OPCODE_X0 = 103,
+  V1MNZ_RRR_0_OPCODE_X1 = 66,
+  V1MULTU_RRR_0_OPCODE_X0 = 104,
+  V1MULUS_RRR_0_OPCODE_X0 = 105,
+  V1MULU_RRR_0_OPCODE_X0 = 106,
+  V1MZ_RRR_0_OPCODE_X0 = 107,
+  V1MZ_RRR_0_OPCODE_X1 = 67,
+  V1SADAU_RRR_0_OPCODE_X0 = 108,
+  V1SADU_RRR_0_OPCODE_X0 = 109,
+  V1SHLI_SHIFT_OPCODE_X0 = 7,
+  V1SHLI_SHIFT_OPCODE_X1 = 7,
+  V1SHL_RRR_0_OPCODE_X0 = 110,
+  V1SHL_RRR_0_OPCODE_X1 = 68,
+  V1SHRSI_SHIFT_OPCODE_X0 = 8,
+  V1SHRSI_SHIFT_OPCODE_X1 = 8,
+  V1SHRS_RRR_0_OPCODE_X0 = 111,
+  V1SHRS_RRR_0_OPCODE_X1 = 69,
+  V1SHRUI_SHIFT_OPCODE_X0 = 9,
+  V1SHRUI_SHIFT_OPCODE_X1 = 9,
+  V1SHRU_RRR_0_OPCODE_X0 = 112,
+  V1SHRU_RRR_0_OPCODE_X1 = 70,
+  V1SUBUC_RRR_0_OPCODE_X0 = 113,
+  V1SUBUC_RRR_0_OPCODE_X1 = 71,
+  V1SUB_RRR_0_OPCODE_X0 = 114,
+  V1SUB_RRR_0_OPCODE_X1 = 72,
+  V2ADDI_IMM8_OPCODE_X0 = 14,
+  V2ADDI_IMM8_OPCODE_X1 = 39,
+  V2ADDSC_RRR_0_OPCODE_X0 = 115,
+  V2ADDSC_RRR_0_OPCODE_X1 = 73,
+  V2ADD_RRR_0_OPCODE_X0 = 116,
+  V2ADD_RRR_0_OPCODE_X1 = 74,
+  V2ADIFFS_RRR_0_OPCODE_X0 = 117,
+  V2AVGS_RRR_0_OPCODE_X0 = 118,
+  V2CMPEQI_IMM8_OPCODE_X0 = 15,
+  V2CMPEQI_IMM8_OPCODE_X1 = 40,
+  V2CMPEQ_RRR_0_OPCODE_X0 = 119,
+  V2CMPEQ_RRR_0_OPCODE_X1 = 75,
+  V2CMPLES_RRR_0_OPCODE_X0 = 120,
+  V2CMPLES_RRR_0_OPCODE_X1 = 76,
+  V2CMPLEU_RRR_0_OPCODE_X0 = 121,
+  V2CMPLEU_RRR_0_OPCODE_X1 = 77,
+  V2CMPLTSI_IMM8_OPCODE_X0 = 16,
+  V2CMPLTSI_IMM8_OPCODE_X1 = 41,
+  V2CMPLTS_RRR_0_OPCODE_X0 = 122,
+  V2CMPLTS_RRR_0_OPCODE_X1 = 78,
+  V2CMPLTUI_IMM8_OPCODE_X0 = 17,
+  V2CMPLTUI_IMM8_OPCODE_X1 = 42,
+  V2CMPLTU_RRR_0_OPCODE_X0 = 123,
+  V2CMPLTU_RRR_0_OPCODE_X1 = 79,
+  V2CMPNE_RRR_0_OPCODE_X0 = 124,
+  V2CMPNE_RRR_0_OPCODE_X1 = 80,
+  V2DOTPA_RRR_0_OPCODE_X0 = 125,
+  V2DOTP_RRR_0_OPCODE_X0 = 126,
+  V2INT_H_RRR_0_OPCODE_X0 = 127,
+  V2INT_H_RRR_0_OPCODE_X1 = 81,
+  V2INT_L_RRR_0_OPCODE_X0 = 128,
+  V2INT_L_RRR_0_OPCODE_X1 = 82,
+  V2MAXSI_IMM8_OPCODE_X0 = 18,
+  V2MAXSI_IMM8_OPCODE_X1 = 43,
+  V2MAXS_RRR_0_OPCODE_X0 = 129,
+  V2MAXS_RRR_0_OPCODE_X1 = 83,
+  V2MINSI_IMM8_OPCODE_X0 = 19,
+  V2MINSI_IMM8_OPCODE_X1 = 44,
+  V2MINS_RRR_0_OPCODE_X0 = 130,
+  V2MINS_RRR_0_OPCODE_X1 = 84,
+  V2MNZ_RRR_0_OPCODE_X0 = 131,
+  V2MNZ_RRR_0_OPCODE_X1 = 85,
+  V2MULFSC_RRR_0_OPCODE_X0 = 132,
+  V2MULS_RRR_0_OPCODE_X0 = 133,
+  V2MULTS_RRR_0_OPCODE_X0 = 134,
+  V2MZ_RRR_0_OPCODE_X0 = 135,
+  V2MZ_RRR_0_OPCODE_X1 = 86,
+  V2PACKH_RRR_0_OPCODE_X0 = 136,
+  V2PACKH_RRR_0_OPCODE_X1 = 87,
+  V2PACKL_RRR_0_OPCODE_X0 = 137,
+  V2PACKL_RRR_0_OPCODE_X1 = 88,
+  V2PACKUC_RRR_0_OPCODE_X0 = 138,
+  V2PACKUC_RRR_0_OPCODE_X1 = 89,
+  V2SADAS_RRR_0_OPCODE_X0 = 139,
+  V2SADAU_RRR_0_OPCODE_X0 = 140,
+  V2SADS_RRR_0_OPCODE_X0 = 141,
+  V2SADU_RRR_0_OPCODE_X0 = 142,
+  V2SHLI_SHIFT_OPCODE_X0 = 10,
+  V2SHLI_SHIFT_OPCODE_X1 = 10,
+  V2SHLSC_RRR_0_OPCODE_X0 = 143,
+  V2SHLSC_RRR_0_OPCODE_X1 = 90,
+  V2SHL_RRR_0_OPCODE_X0 = 144,
+  V2SHL_RRR_0_OPCODE_X1 = 91,
+  V2SHRSI_SHIFT_OPCODE_X0 = 11,
+  V2SHRSI_SHIFT_OPCODE_X1 = 11,
+  V2SHRS_RRR_0_OPCODE_X0 = 145,
+  V2SHRS_RRR_0_OPCODE_X1 = 92,
+  V2SHRUI_SHIFT_OPCODE_X0 = 12,
+  V2SHRUI_SHIFT_OPCODE_X1 = 12,
+  V2SHRU_RRR_0_OPCODE_X0 = 146,
+  V2SHRU_RRR_0_OPCODE_X1 = 93,
+  V2SUBSC_RRR_0_OPCODE_X0 = 147,
+  V2SUBSC_RRR_0_OPCODE_X1 = 94,
+  V2SUB_RRR_0_OPCODE_X0 = 148,
+  V2SUB_RRR_0_OPCODE_X1 = 95,
+  V4ADDSC_RRR_0_OPCODE_X0 = 149,
+  V4ADDSC_RRR_0_OPCODE_X1 = 96,
+  V4ADD_RRR_0_OPCODE_X0 = 150,
+  V4ADD_RRR_0_OPCODE_X1 = 97,
+  V4INT_H_RRR_0_OPCODE_X0 = 151,
+  V4INT_H_RRR_0_OPCODE_X1 = 98,
+  V4INT_L_RRR_0_OPCODE_X0 = 152,
+  V4INT_L_RRR_0_OPCODE_X1 = 99,
+  V4PACKSC_RRR_0_OPCODE_X0 = 153,
+  V4PACKSC_RRR_0_OPCODE_X1 = 100,
+  V4SHLSC_RRR_0_OPCODE_X0 = 154,
+  V4SHLSC_RRR_0_OPCODE_X1 = 101,
+  V4SHL_RRR_0_OPCODE_X0 = 155,
+  V4SHL_RRR_0_OPCODE_X1 = 102,
+  V4SHRS_RRR_0_OPCODE_X0 = 156,
+  V4SHRS_RRR_0_OPCODE_X1 = 103,
+  V4SHRU_RRR_0_OPCODE_X0 = 157,
+  V4SHRU_RRR_0_OPCODE_X1 = 104,
+  V4SUBSC_RRR_0_OPCODE_X0 = 158,
+  V4SUBSC_RRR_0_OPCODE_X1 = 105,
+  V4SUB_RRR_0_OPCODE_X0 = 159,
+  V4SUB_RRR_0_OPCODE_X1 = 106,
+  WH64_UNARY_OPCODE_X1 = 38,
+  XORI_IMM8_OPCODE_X0 = 20,
+  XORI_IMM8_OPCODE_X1 = 45,
+  XOR_RRR_0_OPCODE_X0 = 160,
+  XOR_RRR_0_OPCODE_X1 = 107,
+  XOR_RRR_5_OPCODE_Y0 = 3,
+  XOR_RRR_5_OPCODE_Y1 = 3
+};
+
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ARCH_OPCODE_H__ */
diff --git a/arch/tile/include/arch/opcode_tilepro.h b/arch/tile/include/arch/opcode_tilepro.h
new file mode 100644
index 0000000..71b763b
--- /dev/null
+++ b/arch/tile/include/arch/opcode_tilepro.h
@@ -0,0 +1,1471 @@
+/* TILEPro opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
+#ifndef __ARCH_OPCODE_H__
+#define __ARCH_OPCODE_H__
+
+#ifndef __ASSEMBLER__
+
+typedef unsigned long long tilepro_bundle_bits;
+
+/* This is the bit that determines if a bundle is in the Y encoding. */
+#define TILEPRO_BUNDLE_Y_ENCODING_MASK ((tilepro_bundle_bits)1 << 63)
+
+enum
+{
+  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+  TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+  TILEPRO_NUM_PIPELINE_ENCODINGS = 5,
+
+  /* Log base 2 of TILEPRO_BUNDLE_SIZE_IN_BYTES. */
+  TILEPRO_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+  /* Instructions take this many bytes. */
+  TILEPRO_BUNDLE_SIZE_IN_BYTES = 1 << TILEPRO_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+  /* Log base 2 of TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES. */
+  TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+  /* Bundles should be aligned modulo this number of bytes. */
+  TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES =
+    (1 << TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+  /* Log base 2 of TILEPRO_SN_INSTRUCTION_SIZE_IN_BYTES. */
+  TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
+
+  /* Static network instructions take this many bytes. */
+  TILEPRO_SN_INSTRUCTION_SIZE_IN_BYTES =
+    (1 << TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
+
+  /* Number of registers (some are magic, such as network I/O). */
+  TILEPRO_NUM_REGISTERS = 64,
+
+  /* Number of static network registers. */
+  TILEPRO_NUM_SN_REGISTERS = 4
+};
+
+/* Make a few "tile_" variables to simplify common code between
+   architectures.  */
+
+typedef tilepro_bundle_bits tile_bundle_bits;
+#define TILE_BUNDLE_SIZE_IN_BYTES TILEPRO_BUNDLE_SIZE_IN_BYTES
+#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES
+#define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \
+  TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILEPRO_BPT_BUNDLE 0x400b3cae70166000ULL
+
+static __inline unsigned int
+get_BrOff_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000);
+}
+
+static __inline unsigned int
+get_BrType_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0xf);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 2)) & 0x3);
+}
+
+static __inline unsigned int
+get_Dest_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmRROpcodeExtension_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 8)) & 0x3);
+}
+
+static __inline unsigned int
+get_JOffLong_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x18000000);
+}
+
+static __inline unsigned int
+get_JOff_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x08000000);
+}
+
+static __inline unsigned int
+get_MF_Imm15_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x00003fff) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_MMEnd_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMEnd_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 23)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MT_Imm15_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x00003fc0) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_Mode(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 63)) & 0x1);
+}
+
+static __inline unsigned int
+get_NoRegOpcodeExtension_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 10)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 56)) & 0x7);
+}
+
+static __inline unsigned int
+get_RROpcodeExtension_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 4)) & 0xf);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_RouteOpcodeExtension_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_S_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0x1);
+}
+
+static __inline unsigned int
+get_S_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tilepro_bundle_bits n)
+{
+  return (((n >> 26)) & 0x00000001) |
+         (((unsigned int)(n >> 50)) & 0x0000003e);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Src_SN(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y0(tilepro_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x7);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y1(tilepro_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x7);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+  int shift = (int)(sizeof(int) * 8 - num_bits);
+  return (n << shift) >> shift;
+}
+
+
+
+static __inline tilepro_bundle_bits
+create_BrOff_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_BrOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tilepro_bundle_bits)(n & 0x00018000)) << 20);
+}
+
+static __inline tilepro_bundle_bits
+create_BrType_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xf)) << 31);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilepro_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 2);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_Dest_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm16_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xffff) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm16_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm8_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm8_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm8_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_Imm8_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_ImmOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7f) << 20);
+}
+
+static __inline tilepro_bundle_bits
+create_ImmOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x7f)) << 51);
+}
+
+static __inline tilepro_bundle_bits
+create_ImmRROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 8);
+}
+
+static __inline tilepro_bundle_bits
+create_JOffLong_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tilepro_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tilepro_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tilepro_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tilepro_bundle_bits)(n & 0x18000000)) << 31);
+}
+
+static __inline tilepro_bundle_bits
+create_JOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tilepro_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tilepro_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tilepro_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tilepro_bundle_bits)(n & 0x08000000)) << 31);
+}
+
+static __inline tilepro_bundle_bits
+create_MF_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x00003fff)) << 37) |
+         (((tilepro_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tilepro_bundle_bits
+create_MMEnd_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 18);
+}
+
+static __inline tilepro_bundle_bits
+create_MMEnd_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 49);
+}
+
+static __inline tilepro_bundle_bits
+create_MMStart_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 23);
+}
+
+static __inline tilepro_bundle_bits
+create_MMStart_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tilepro_bundle_bits
+create_MT_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tilepro_bundle_bits)(n & 0x00003fc0)) << 37) |
+         (((tilepro_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tilepro_bundle_bits
+create_Mode(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1)) << 63);
+}
+
+static __inline tilepro_bundle_bits
+create_NoRegOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 10);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 28);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 27);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tilepro_bundle_bits
+create_Opcode_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x7)) << 56);
+}
+
+static __inline tilepro_bundle_bits
+create_RROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 4);
+}
+
+static __inline tilepro_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1ff) << 18);
+}
+
+static __inline tilepro_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1ff)) << 49);
+}
+
+static __inline tilepro_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tilepro_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tilepro_bundle_bits
+create_RouteOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_S_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1) << 27);
+}
+
+static __inline tilepro_bundle_bits
+create_S_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tilepro_bundle_bits
+create_ShAmt_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_ShAmt_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_ShAmt_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_ShAmt_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcA_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcA_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcA_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcA_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcA_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x00000001) << 26) |
+         (((tilepro_bundle_bits)(n & 0x0000003e)) << 50);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 20);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcB_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcB_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcB_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_SrcB_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_Src_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 0);
+}
+
+static __inline tilepro_bundle_bits
+create_UnOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_UnOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_UnOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tilepro_bundle_bits
+create_UnOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tilepro_bundle_bits
+create_UnShOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 17);
+}
+
+static __inline tilepro_bundle_bits
+create_UnShOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x3ff)) << 48);
+}
+
+static __inline tilepro_bundle_bits
+create_UnShOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 17);
+}
+
+static __inline tilepro_bundle_bits
+create_UnShOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tilepro_bundle_bits)(n & 0x7)) << 48);
+}
+
+
+enum
+{
+  ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
+  ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
+  ADDB_SPECIAL_0_OPCODE_X0 = 1,
+  ADDB_SPECIAL_0_OPCODE_X1 = 1,
+  ADDHS_SPECIAL_0_OPCODE_X0 = 99,
+  ADDHS_SPECIAL_0_OPCODE_X1 = 69,
+  ADDH_SPECIAL_0_OPCODE_X0 = 2,
+  ADDH_SPECIAL_0_OPCODE_X1 = 2,
+  ADDIB_IMM_0_OPCODE_X0 = 1,
+  ADDIB_IMM_0_OPCODE_X1 = 1,
+  ADDIH_IMM_0_OPCODE_X0 = 2,
+  ADDIH_IMM_0_OPCODE_X1 = 2,
+  ADDI_IMM_0_OPCODE_X0 = 3,
+  ADDI_IMM_0_OPCODE_X1 = 3,
+  ADDI_IMM_1_OPCODE_SN = 1,
+  ADDI_OPCODE_Y0 = 9,
+  ADDI_OPCODE_Y1 = 7,
+  ADDLIS_OPCODE_X0 = 1,
+  ADDLIS_OPCODE_X1 = 2,
+  ADDLI_OPCODE_X0 = 2,
+  ADDLI_OPCODE_X1 = 3,
+  ADDS_SPECIAL_0_OPCODE_X0 = 96,
+  ADDS_SPECIAL_0_OPCODE_X1 = 66,
+  ADD_SPECIAL_0_OPCODE_X0 = 3,
+  ADD_SPECIAL_0_OPCODE_X1 = 3,
+  ADD_SPECIAL_0_OPCODE_Y0 = 0,
+  ADD_SPECIAL_0_OPCODE_Y1 = 0,
+  ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
+  ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
+  ANDI_IMM_0_OPCODE_X0 = 1,
+  ANDI_IMM_0_OPCODE_X1 = 4,
+  ANDI_OPCODE_Y0 = 10,
+  ANDI_OPCODE_Y1 = 8,
+  AND_SPECIAL_0_OPCODE_X0 = 6,
+  AND_SPECIAL_0_OPCODE_X1 = 4,
+  AND_SPECIAL_2_OPCODE_Y0 = 0,
+  AND_SPECIAL_2_OPCODE_Y1 = 0,
+  AULI_OPCODE_X0 = 3,
+  AULI_OPCODE_X1 = 4,
+  AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
+  AVGH_SPECIAL_0_OPCODE_X0 = 8,
+  BBNST_BRANCH_OPCODE_X1 = 15,
+  BBNS_BRANCH_OPCODE_X1 = 14,
+  BBNS_OPCODE_SN = 63,
+  BBST_BRANCH_OPCODE_X1 = 13,
+  BBS_BRANCH_OPCODE_X1 = 12,
+  BBS_OPCODE_SN = 62,
+  BGEZT_BRANCH_OPCODE_X1 = 7,
+  BGEZ_BRANCH_OPCODE_X1 = 6,
+  BGEZ_OPCODE_SN = 61,
+  BGZT_BRANCH_OPCODE_X1 = 5,
+  BGZ_BRANCH_OPCODE_X1 = 4,
+  BGZ_OPCODE_SN = 58,
+  BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
+  BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
+  BLEZT_BRANCH_OPCODE_X1 = 11,
+  BLEZ_BRANCH_OPCODE_X1 = 10,
+  BLEZ_OPCODE_SN = 59,
+  BLZT_BRANCH_OPCODE_X1 = 9,
+  BLZ_BRANCH_OPCODE_X1 = 8,
+  BLZ_OPCODE_SN = 60,
+  BNZT_BRANCH_OPCODE_X1 = 3,
+  BNZ_BRANCH_OPCODE_X1 = 2,
+  BNZ_OPCODE_SN = 57,
+  BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
+  BRANCH_OPCODE_X1 = 5,
+  BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
+  BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
+  BZT_BRANCH_OPCODE_X1 = 1,
+  BZ_BRANCH_OPCODE_X1 = 0,
+  BZ_OPCODE_SN = 56,
+  CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
+  CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
+  CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
+  CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
+  CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
+  CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
+  DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
+  DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
+  DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
+  FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
+  FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
+  FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
+  FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
+  HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
+  ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
+  ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
+  ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
+  IMM_0_OPCODE_SN = 0,
+  IMM_0_OPCODE_X0 = 4,
+  IMM_0_OPCODE_X1 = 6,
+  IMM_1_OPCODE_SN = 1,
+  IMM_OPCODE_0_X0 = 5,
+  INTHB_SPECIAL_0_OPCODE_X0 = 11,
+  INTHB_SPECIAL_0_OPCODE_X1 = 5,
+  INTHH_SPECIAL_0_OPCODE_X0 = 12,
+  INTHH_SPECIAL_0_OPCODE_X1 = 6,
+  INTLB_SPECIAL_0_OPCODE_X0 = 13,
+  INTLB_SPECIAL_0_OPCODE_X1 = 7,
+  INTLH_SPECIAL_0_OPCODE_X0 = 14,
+  INTLH_SPECIAL_0_OPCODE_X1 = 8,
+  INV_UN_0_SHUN_0_OPCODE_X1 = 8,
+  IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
+  JALB_OPCODE_X1 = 13,
+  JALF_OPCODE_X1 = 12,
+  JALRP_SPECIAL_0_OPCODE_X1 = 9,
+  JALRR_IMM_1_OPCODE_SN = 3,
+  JALR_RR_IMM_0_OPCODE_SN = 5,
+  JALR_SPECIAL_0_OPCODE_X1 = 10,
+  JB_OPCODE_X1 = 11,
+  JF_OPCODE_X1 = 10,
+  JRP_SPECIAL_0_OPCODE_X1 = 11,
+  JRR_IMM_1_OPCODE_SN = 2,
+  JR_RR_IMM_0_OPCODE_SN = 4,
+  JR_SPECIAL_0_OPCODE_X1 = 12,
+  LBADD_IMM_0_OPCODE_X1 = 22,
+  LBADD_U_IMM_0_OPCODE_X1 = 23,
+  LB_OPCODE_Y2 = 0,
+  LB_UN_0_SHUN_0_OPCODE_X1 = 10,
+  LB_U_OPCODE_Y2 = 1,
+  LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
+  LHADD_IMM_0_OPCODE_X1 = 24,
+  LHADD_U_IMM_0_OPCODE_X1 = 25,
+  LH_OPCODE_Y2 = 2,
+  LH_UN_0_SHUN_0_OPCODE_X1 = 12,
+  LH_U_OPCODE_Y2 = 3,
+  LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
+  LNK_SPECIAL_0_OPCODE_X1 = 13,
+  LWADD_IMM_0_OPCODE_X1 = 26,
+  LWADD_NA_IMM_0_OPCODE_X1 = 27,
+  LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
+  LW_OPCODE_Y2 = 4,
+  LW_UN_0_SHUN_0_OPCODE_X1 = 14,
+  MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
+  MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
+  MAXH_SPECIAL_0_OPCODE_X0 = 16,
+  MAXH_SPECIAL_0_OPCODE_X1 = 15,
+  MAXIB_U_IMM_0_OPCODE_X0 = 4,
+  MAXIB_U_IMM_0_OPCODE_X1 = 5,
+  MAXIH_IMM_0_OPCODE_X0 = 5,
+  MAXIH_IMM_0_OPCODE_X1 = 6,
+  MFSPR_IMM_0_OPCODE_X1 = 7,
+  MF_UN_0_SHUN_0_OPCODE_X1 = 15,
+  MINB_U_SPECIAL_0_OPCODE_X0 = 17,
+  MINB_U_SPECIAL_0_OPCODE_X1 = 16,
+  MINH_SPECIAL_0_OPCODE_X0 = 18,
+  MINH_SPECIAL_0_OPCODE_X1 = 17,
+  MINIB_U_IMM_0_OPCODE_X0 = 6,
+  MINIB_U_IMM_0_OPCODE_X1 = 8,
+  MINIH_IMM_0_OPCODE_X0 = 7,
+  MINIH_IMM_0_OPCODE_X1 = 9,
+  MM_OPCODE_X0 = 6,
+  MM_OPCODE_X1 = 7,
+  MNZB_SPECIAL_0_OPCODE_X0 = 19,
+  MNZB_SPECIAL_0_OPCODE_X1 = 18,
+  MNZH_SPECIAL_0_OPCODE_X0 = 20,
+  MNZH_SPECIAL_0_OPCODE_X1 = 19,
+  MNZ_SPECIAL_0_OPCODE_X0 = 21,
+  MNZ_SPECIAL_0_OPCODE_X1 = 20,
+  MNZ_SPECIAL_1_OPCODE_Y0 = 0,
+  MNZ_SPECIAL_1_OPCODE_Y1 = 1,
+  MOVEI_IMM_1_OPCODE_SN = 0,
+  MOVE_RR_IMM_0_OPCODE_SN = 8,
+  MTSPR_IMM_0_OPCODE_X1 = 10,
+  MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
+  MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
+  MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
+  MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
+  MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
+  MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
+  MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
+  MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
+  MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
+  MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
+  MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
+  MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
+  MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
+  MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
+  MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
+  MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
+  MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
+  MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
+  MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
+  MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
+  MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
+  MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
+  MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
+  MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
+  MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
+  MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
+  MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
+  MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
+  MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
+  MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
+  MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
+  MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
+  MVNZ_SPECIAL_0_OPCODE_X0 = 45,
+  MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
+  MVZ_SPECIAL_0_OPCODE_X0 = 46,
+  MVZ_SPECIAL_1_OPCODE_Y0 = 2,
+  MZB_SPECIAL_0_OPCODE_X0 = 47,
+  MZB_SPECIAL_0_OPCODE_X1 = 21,
+  MZH_SPECIAL_0_OPCODE_X0 = 48,
+  MZH_SPECIAL_0_OPCODE_X1 = 22,
+  MZ_SPECIAL_0_OPCODE_X0 = 49,
+  MZ_SPECIAL_0_OPCODE_X1 = 23,
+  MZ_SPECIAL_1_OPCODE_Y0 = 3,
+  MZ_SPECIAL_1_OPCODE_Y1 = 2,
+  NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
+  NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
+  NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
+  NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
+  NOREG_RR_IMM_0_OPCODE_SN = 0,
+  NOR_SPECIAL_0_OPCODE_X0 = 50,
+  NOR_SPECIAL_0_OPCODE_X1 = 24,
+  NOR_SPECIAL_2_OPCODE_Y0 = 1,
+  NOR_SPECIAL_2_OPCODE_Y1 = 1,
+  ORI_IMM_0_OPCODE_X0 = 8,
+  ORI_IMM_0_OPCODE_X1 = 11,
+  ORI_OPCODE_Y0 = 11,
+  ORI_OPCODE_Y1 = 9,
+  OR_SPECIAL_0_OPCODE_X0 = 51,
+  OR_SPECIAL_0_OPCODE_X1 = 25,
+  OR_SPECIAL_2_OPCODE_Y0 = 2,
+  OR_SPECIAL_2_OPCODE_Y1 = 2,
+  PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
+  PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
+  PACKHB_SPECIAL_0_OPCODE_X0 = 52,
+  PACKHB_SPECIAL_0_OPCODE_X1 = 26,
+  PACKHS_SPECIAL_0_OPCODE_X0 = 102,
+  PACKHS_SPECIAL_0_OPCODE_X1 = 72,
+  PACKLB_SPECIAL_0_OPCODE_X0 = 53,
+  PACKLB_SPECIAL_0_OPCODE_X1 = 27,
+  PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
+  PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
+  RLI_SHUN_0_OPCODE_X0 = 1,
+  RLI_SHUN_0_OPCODE_X1 = 1,
+  RLI_SHUN_0_OPCODE_Y0 = 1,
+  RLI_SHUN_0_OPCODE_Y1 = 1,
+  RL_SPECIAL_0_OPCODE_X0 = 54,
+  RL_SPECIAL_0_OPCODE_X1 = 28,
+  RL_SPECIAL_3_OPCODE_Y0 = 0,
+  RL_SPECIAL_3_OPCODE_Y1 = 0,
+  RR_IMM_0_OPCODE_SN = 0,
+  S1A_SPECIAL_0_OPCODE_X0 = 55,
+  S1A_SPECIAL_0_OPCODE_X1 = 29,
+  S1A_SPECIAL_0_OPCODE_Y0 = 1,
+  S1A_SPECIAL_0_OPCODE_Y1 = 1,
+  S2A_SPECIAL_0_OPCODE_X0 = 56,
+  S2A_SPECIAL_0_OPCODE_X1 = 30,
+  S2A_SPECIAL_0_OPCODE_Y0 = 2,
+  S2A_SPECIAL_0_OPCODE_Y1 = 2,
+  S3A_SPECIAL_0_OPCODE_X0 = 57,
+  S3A_SPECIAL_0_OPCODE_X1 = 31,
+  S3A_SPECIAL_5_OPCODE_Y0 = 1,
+  S3A_SPECIAL_5_OPCODE_Y1 = 1,
+  SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
+  SADAH_SPECIAL_0_OPCODE_X0 = 59,
+  SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
+  SADB_U_SPECIAL_0_OPCODE_X0 = 61,
+  SADH_SPECIAL_0_OPCODE_X0 = 62,
+  SADH_U_SPECIAL_0_OPCODE_X0 = 63,
+  SBADD_IMM_0_OPCODE_X1 = 28,
+  SB_OPCODE_Y2 = 5,
+  SB_SPECIAL_0_OPCODE_X1 = 32,
+  SEQB_SPECIAL_0_OPCODE_X0 = 64,
+  SEQB_SPECIAL_0_OPCODE_X1 = 33,
+  SEQH_SPECIAL_0_OPCODE_X0 = 65,
+  SEQH_SPECIAL_0_OPCODE_X1 = 34,
+  SEQIB_IMM_0_OPCODE_X0 = 9,
+  SEQIB_IMM_0_OPCODE_X1 = 12,
+  SEQIH_IMM_0_OPCODE_X0 = 10,
+  SEQIH_IMM_0_OPCODE_X1 = 13,
+  SEQI_IMM_0_OPCODE_X0 = 11,
+  SEQI_IMM_0_OPCODE_X1 = 14,
+  SEQI_OPCODE_Y0 = 12,
+  SEQI_OPCODE_Y1 = 10,
+  SEQ_SPECIAL_0_OPCODE_X0 = 66,
+  SEQ_SPECIAL_0_OPCODE_X1 = 35,
+  SEQ_SPECIAL_5_OPCODE_Y0 = 2,
+  SEQ_SPECIAL_5_OPCODE_Y1 = 2,
+  SHADD_IMM_0_OPCODE_X1 = 29,
+  SHL8II_IMM_0_OPCODE_SN = 3,
+  SHLB_SPECIAL_0_OPCODE_X0 = 67,
+  SHLB_SPECIAL_0_OPCODE_X1 = 36,
+  SHLH_SPECIAL_0_OPCODE_X0 = 68,
+  SHLH_SPECIAL_0_OPCODE_X1 = 37,
+  SHLIB_SHUN_0_OPCODE_X0 = 2,
+  SHLIB_SHUN_0_OPCODE_X1 = 2,
+  SHLIH_SHUN_0_OPCODE_X0 = 3,
+  SHLIH_SHUN_0_OPCODE_X1 = 3,
+  SHLI_SHUN_0_OPCODE_X0 = 4,
+  SHLI_SHUN_0_OPCODE_X1 = 4,
+  SHLI_SHUN_0_OPCODE_Y0 = 2,
+  SHLI_SHUN_0_OPCODE_Y1 = 2,
+  SHL_SPECIAL_0_OPCODE_X0 = 69,
+  SHL_SPECIAL_0_OPCODE_X1 = 38,
+  SHL_SPECIAL_3_OPCODE_Y0 = 1,
+  SHL_SPECIAL_3_OPCODE_Y1 = 1,
+  SHR1_RR_IMM_0_OPCODE_SN = 9,
+  SHRB_SPECIAL_0_OPCODE_X0 = 70,
+  SHRB_SPECIAL_0_OPCODE_X1 = 39,
+  SHRH_SPECIAL_0_OPCODE_X0 = 71,
+  SHRH_SPECIAL_0_OPCODE_X1 = 40,
+  SHRIB_SHUN_0_OPCODE_X0 = 5,
+  SHRIB_SHUN_0_OPCODE_X1 = 5,
+  SHRIH_SHUN_0_OPCODE_X0 = 6,
+  SHRIH_SHUN_0_OPCODE_X1 = 6,
+  SHRI_SHUN_0_OPCODE_X0 = 7,
+  SHRI_SHUN_0_OPCODE_X1 = 7,
+  SHRI_SHUN_0_OPCODE_Y0 = 3,
+  SHRI_SHUN_0_OPCODE_Y1 = 3,
+  SHR_SPECIAL_0_OPCODE_X0 = 72,
+  SHR_SPECIAL_0_OPCODE_X1 = 41,
+  SHR_SPECIAL_3_OPCODE_Y0 = 2,
+  SHR_SPECIAL_3_OPCODE_Y1 = 2,
+  SHUN_0_OPCODE_X0 = 7,
+  SHUN_0_OPCODE_X1 = 8,
+  SHUN_0_OPCODE_Y0 = 13,
+  SHUN_0_OPCODE_Y1 = 11,
+  SH_OPCODE_Y2 = 6,
+  SH_SPECIAL_0_OPCODE_X1 = 42,
+  SLTB_SPECIAL_0_OPCODE_X0 = 73,
+  SLTB_SPECIAL_0_OPCODE_X1 = 43,
+  SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
+  SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
+  SLTEB_SPECIAL_0_OPCODE_X0 = 75,
+  SLTEB_SPECIAL_0_OPCODE_X1 = 45,
+  SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
+  SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
+  SLTEH_SPECIAL_0_OPCODE_X0 = 77,
+  SLTEH_SPECIAL_0_OPCODE_X1 = 47,
+  SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
+  SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
+  SLTE_SPECIAL_0_OPCODE_X0 = 79,
+  SLTE_SPECIAL_0_OPCODE_X1 = 49,
+  SLTE_SPECIAL_4_OPCODE_Y0 = 0,
+  SLTE_SPECIAL_4_OPCODE_Y1 = 0,
+  SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
+  SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
+  SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
+  SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
+  SLTH_SPECIAL_0_OPCODE_X0 = 81,
+  SLTH_SPECIAL_0_OPCODE_X1 = 51,
+  SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
+  SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
+  SLTIB_IMM_0_OPCODE_X0 = 12,
+  SLTIB_IMM_0_OPCODE_X1 = 15,
+  SLTIB_U_IMM_0_OPCODE_X0 = 13,
+  SLTIB_U_IMM_0_OPCODE_X1 = 16,
+  SLTIH_IMM_0_OPCODE_X0 = 14,
+  SLTIH_IMM_0_OPCODE_X1 = 17,
+  SLTIH_U_IMM_0_OPCODE_X0 = 15,
+  SLTIH_U_IMM_0_OPCODE_X1 = 18,
+  SLTI_IMM_0_OPCODE_X0 = 16,
+  SLTI_IMM_0_OPCODE_X1 = 19,
+  SLTI_OPCODE_Y0 = 14,
+  SLTI_OPCODE_Y1 = 12,
+  SLTI_U_IMM_0_OPCODE_X0 = 17,
+  SLTI_U_IMM_0_OPCODE_X1 = 20,
+  SLTI_U_OPCODE_Y0 = 15,
+  SLTI_U_OPCODE_Y1 = 13,
+  SLT_SPECIAL_0_OPCODE_X0 = 83,
+  SLT_SPECIAL_0_OPCODE_X1 = 53,
+  SLT_SPECIAL_4_OPCODE_Y0 = 2,
+  SLT_SPECIAL_4_OPCODE_Y1 = 2,
+  SLT_U_SPECIAL_0_OPCODE_X0 = 84,
+  SLT_U_SPECIAL_0_OPCODE_X1 = 54,
+  SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
+  SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
+  SNEB_SPECIAL_0_OPCODE_X0 = 85,
+  SNEB_SPECIAL_0_OPCODE_X1 = 55,
+  SNEH_SPECIAL_0_OPCODE_X0 = 86,
+  SNEH_SPECIAL_0_OPCODE_X1 = 56,
+  SNE_SPECIAL_0_OPCODE_X0 = 87,
+  SNE_SPECIAL_0_OPCODE_X1 = 57,
+  SNE_SPECIAL_5_OPCODE_Y0 = 3,
+  SNE_SPECIAL_5_OPCODE_Y1 = 3,
+  SPECIAL_0_OPCODE_X0 = 0,
+  SPECIAL_0_OPCODE_X1 = 1,
+  SPECIAL_0_OPCODE_Y0 = 1,
+  SPECIAL_0_OPCODE_Y1 = 1,
+  SPECIAL_1_OPCODE_Y0 = 2,
+  SPECIAL_1_OPCODE_Y1 = 2,
+  SPECIAL_2_OPCODE_Y0 = 3,
+  SPECIAL_2_OPCODE_Y1 = 3,
+  SPECIAL_3_OPCODE_Y0 = 4,
+  SPECIAL_3_OPCODE_Y1 = 4,
+  SPECIAL_4_OPCODE_Y0 = 5,
+  SPECIAL_4_OPCODE_Y1 = 5,
+  SPECIAL_5_OPCODE_Y0 = 6,
+  SPECIAL_5_OPCODE_Y1 = 6,
+  SPECIAL_6_OPCODE_Y0 = 7,
+  SPECIAL_7_OPCODE_Y0 = 8,
+  SRAB_SPECIAL_0_OPCODE_X0 = 88,
+  SRAB_SPECIAL_0_OPCODE_X1 = 58,
+  SRAH_SPECIAL_0_OPCODE_X0 = 89,
+  SRAH_SPECIAL_0_OPCODE_X1 = 59,
+  SRAIB_SHUN_0_OPCODE_X0 = 8,
+  SRAIB_SHUN_0_OPCODE_X1 = 8,
+  SRAIH_SHUN_0_OPCODE_X0 = 9,
+  SRAIH_SHUN_0_OPCODE_X1 = 9,
+  SRAI_SHUN_0_OPCODE_X0 = 10,
+  SRAI_SHUN_0_OPCODE_X1 = 10,
+  SRAI_SHUN_0_OPCODE_Y0 = 4,
+  SRAI_SHUN_0_OPCODE_Y1 = 4,
+  SRA_SPECIAL_0_OPCODE_X0 = 90,
+  SRA_SPECIAL_0_OPCODE_X1 = 60,
+  SRA_SPECIAL_3_OPCODE_Y0 = 3,
+  SRA_SPECIAL_3_OPCODE_Y1 = 3,
+  SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
+  SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
+  SUBB_SPECIAL_0_OPCODE_X0 = 91,
+  SUBB_SPECIAL_0_OPCODE_X1 = 61,
+  SUBHS_SPECIAL_0_OPCODE_X0 = 101,
+  SUBHS_SPECIAL_0_OPCODE_X1 = 71,
+  SUBH_SPECIAL_0_OPCODE_X0 = 92,
+  SUBH_SPECIAL_0_OPCODE_X1 = 62,
+  SUBS_SPECIAL_0_OPCODE_X0 = 97,
+  SUBS_SPECIAL_0_OPCODE_X1 = 67,
+  SUB_SPECIAL_0_OPCODE_X0 = 93,
+  SUB_SPECIAL_0_OPCODE_X1 = 63,
+  SUB_SPECIAL_0_OPCODE_Y0 = 3,
+  SUB_SPECIAL_0_OPCODE_Y1 = 3,
+  SWADD_IMM_0_OPCODE_X1 = 30,
+  SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
+  SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
+  SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
+  SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
+  SW_OPCODE_Y2 = 7,
+  SW_SPECIAL_0_OPCODE_X1 = 64,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
+  TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
+  UN_0_SHUN_0_OPCODE_X0 = 11,
+  UN_0_SHUN_0_OPCODE_X1 = 11,
+  UN_0_SHUN_0_OPCODE_Y0 = 5,
+  UN_0_SHUN_0_OPCODE_Y1 = 5,
+  WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
+  XORI_IMM_0_OPCODE_X0 = 2,
+  XORI_IMM_0_OPCODE_X1 = 21,
+  XOR_SPECIAL_0_OPCODE_X0 = 94,
+  XOR_SPECIAL_0_OPCODE_X1 = 65,
+  XOR_SPECIAL_2_OPCODE_Y0 = 3,
+  XOR_SPECIAL_2_OPCODE_Y1 = 3
+};
+
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ARCH_OPCODE_H__ */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index aec60dc..0bb4264 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,5 +1,7 @@
 include include/asm-generic/Kbuild.asm
 
+header-y += ../arch/
+
 header-y += ucontext.h
 header-y += hardwall.h
 
diff --git a/arch/tile/include/asm/opcode-tile.h b/arch/tile/include/asm/opcode-tile.h
deleted file mode 100644
index ba38959..0000000
--- a/arch/tile/include/asm/opcode-tile.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_OPCODE_TILE_H
-#define _ASM_TILE_OPCODE_TILE_H
-
-#include <arch/chip.h>
-
-#if CHIP_WORD_SIZE() == 64
-#include <asm/opcode-tile_64.h>
-#else
-#include <asm/opcode-tile_32.h>
-#endif
-
-/* These definitions are not correct for TILE64, so just avoid them. */
-#undef TILE_ELF_MACHINE_CODE
-#undef TILE_ELF_NAME
-
-#endif /* _ASM_TILE_OPCODE_TILE_H */
diff --git a/arch/tile/include/asm/opcode-tile_32.h b/arch/tile/include/asm/opcode-tile_32.h
deleted file mode 100644
index 03df7b1..0000000
--- a/arch/tile/include/asm/opcode-tile_32.h
+++ /dev/null
@@ -1,1513 +0,0 @@
-/* tile.h -- Header file for TILE opcode table
-   Copyright (C) 2005 Free Software Foundation, Inc.
-   Contributed by Tilera Corp. */
-
-#ifndef opcode_tile_h
-#define opcode_tile_h
-
-typedef unsigned long long tile_bundle_bits;
-
-
-enum
-{
-  TILE_MAX_OPERANDS = 5 /* mm */
-};
-
-typedef enum
-{
-  TILE_OPC_BPT,
-  TILE_OPC_INFO,
-  TILE_OPC_INFOL,
-  TILE_OPC_J,
-  TILE_OPC_JAL,
-  TILE_OPC_MOVE,
-  TILE_OPC_MOVE_SN,
-  TILE_OPC_MOVEI,
-  TILE_OPC_MOVEI_SN,
-  TILE_OPC_MOVELI,
-  TILE_OPC_MOVELI_SN,
-  TILE_OPC_MOVELIS,
-  TILE_OPC_PREFETCH,
-  TILE_OPC_RAISE,
-  TILE_OPC_ADD,
-  TILE_OPC_ADD_SN,
-  TILE_OPC_ADDB,
-  TILE_OPC_ADDB_SN,
-  TILE_OPC_ADDBS_U,
-  TILE_OPC_ADDBS_U_SN,
-  TILE_OPC_ADDH,
-  TILE_OPC_ADDH_SN,
-  TILE_OPC_ADDHS,
-  TILE_OPC_ADDHS_SN,
-  TILE_OPC_ADDI,
-  TILE_OPC_ADDI_SN,
-  TILE_OPC_ADDIB,
-  TILE_OPC_ADDIB_SN,
-  TILE_OPC_ADDIH,
-  TILE_OPC_ADDIH_SN,
-  TILE_OPC_ADDLI,
-  TILE_OPC_ADDLI_SN,
-  TILE_OPC_ADDLIS,
-  TILE_OPC_ADDS,
-  TILE_OPC_ADDS_SN,
-  TILE_OPC_ADIFFB_U,
-  TILE_OPC_ADIFFB_U_SN,
-  TILE_OPC_ADIFFH,
-  TILE_OPC_ADIFFH_SN,
-  TILE_OPC_AND,
-  TILE_OPC_AND_SN,
-  TILE_OPC_ANDI,
-  TILE_OPC_ANDI_SN,
-  TILE_OPC_AULI,
-  TILE_OPC_AVGB_U,
-  TILE_OPC_AVGB_U_SN,
-  TILE_OPC_AVGH,
-  TILE_OPC_AVGH_SN,
-  TILE_OPC_BBNS,
-  TILE_OPC_BBNS_SN,
-  TILE_OPC_BBNST,
-  TILE_OPC_BBNST_SN,
-  TILE_OPC_BBS,
-  TILE_OPC_BBS_SN,
-  TILE_OPC_BBST,
-  TILE_OPC_BBST_SN,
-  TILE_OPC_BGEZ,
-  TILE_OPC_BGEZ_SN,
-  TILE_OPC_BGEZT,
-  TILE_OPC_BGEZT_SN,
-  TILE_OPC_BGZ,
-  TILE_OPC_BGZ_SN,
-  TILE_OPC_BGZT,
-  TILE_OPC_BGZT_SN,
-  TILE_OPC_BITX,
-  TILE_OPC_BITX_SN,
-  TILE_OPC_BLEZ,
-  TILE_OPC_BLEZ_SN,
-  TILE_OPC_BLEZT,
-  TILE_OPC_BLEZT_SN,
-  TILE_OPC_BLZ,
-  TILE_OPC_BLZ_SN,
-  TILE_OPC_BLZT,
-  TILE_OPC_BLZT_SN,
-  TILE_OPC_BNZ,
-  TILE_OPC_BNZ_SN,
-  TILE_OPC_BNZT,
-  TILE_OPC_BNZT_SN,
-  TILE_OPC_BYTEX,
-  TILE_OPC_BYTEX_SN,
-  TILE_OPC_BZ,
-  TILE_OPC_BZ_SN,
-  TILE_OPC_BZT,
-  TILE_OPC_BZT_SN,
-  TILE_OPC_CLZ,
-  TILE_OPC_CLZ_SN,
-  TILE_OPC_CRC32_32,
-  TILE_OPC_CRC32_32_SN,
-  TILE_OPC_CRC32_8,
-  TILE_OPC_CRC32_8_SN,
-  TILE_OPC_CTZ,
-  TILE_OPC_CTZ_SN,
-  TILE_OPC_DRAIN,
-  TILE_OPC_DTLBPR,
-  TILE_OPC_DWORD_ALIGN,
-  TILE_OPC_DWORD_ALIGN_SN,
-  TILE_OPC_FINV,
-  TILE_OPC_FLUSH,
-  TILE_OPC_FNOP,
-  TILE_OPC_ICOH,
-  TILE_OPC_ILL,
-  TILE_OPC_INTHB,
-  TILE_OPC_INTHB_SN,
-  TILE_OPC_INTHH,
-  TILE_OPC_INTHH_SN,
-  TILE_OPC_INTLB,
-  TILE_OPC_INTLB_SN,
-  TILE_OPC_INTLH,
-  TILE_OPC_INTLH_SN,
-  TILE_OPC_INV,
-  TILE_OPC_IRET,
-  TILE_OPC_JALB,
-  TILE_OPC_JALF,
-  TILE_OPC_JALR,
-  TILE_OPC_JALRP,
-  TILE_OPC_JB,
-  TILE_OPC_JF,
-  TILE_OPC_JR,
-  TILE_OPC_JRP,
-  TILE_OPC_LB,
-  TILE_OPC_LB_SN,
-  TILE_OPC_LB_U,
-  TILE_OPC_LB_U_SN,
-  TILE_OPC_LBADD,
-  TILE_OPC_LBADD_SN,
-  TILE_OPC_LBADD_U,
-  TILE_OPC_LBADD_U_SN,
-  TILE_OPC_LH,
-  TILE_OPC_LH_SN,
-  TILE_OPC_LH_U,
-  TILE_OPC_LH_U_SN,
-  TILE_OPC_LHADD,
-  TILE_OPC_LHADD_SN,
-  TILE_OPC_LHADD_U,
-  TILE_OPC_LHADD_U_SN,
-  TILE_OPC_LNK,
-  TILE_OPC_LNK_SN,
-  TILE_OPC_LW,
-  TILE_OPC_LW_SN,
-  TILE_OPC_LW_NA,
-  TILE_OPC_LW_NA_SN,
-  TILE_OPC_LWADD,
-  TILE_OPC_LWADD_SN,
-  TILE_OPC_LWADD_NA,
-  TILE_OPC_LWADD_NA_SN,
-  TILE_OPC_MAXB_U,
-  TILE_OPC_MAXB_U_SN,
-  TILE_OPC_MAXH,
-  TILE_OPC_MAXH_SN,
-  TILE_OPC_MAXIB_U,
-  TILE_OPC_MAXIB_U_SN,
-  TILE_OPC_MAXIH,
-  TILE_OPC_MAXIH_SN,
-  TILE_OPC_MF,
-  TILE_OPC_MFSPR,
-  TILE_OPC_MINB_U,
-  TILE_OPC_MINB_U_SN,
-  TILE_OPC_MINH,
-  TILE_OPC_MINH_SN,
-  TILE_OPC_MINIB_U,
-  TILE_OPC_MINIB_U_SN,
-  TILE_OPC_MINIH,
-  TILE_OPC_MINIH_SN,
-  TILE_OPC_MM,
-  TILE_OPC_MNZ,
-  TILE_OPC_MNZ_SN,
-  TILE_OPC_MNZB,
-  TILE_OPC_MNZB_SN,
-  TILE_OPC_MNZH,
-  TILE_OPC_MNZH_SN,
-  TILE_OPC_MTSPR,
-  TILE_OPC_MULHH_SS,
-  TILE_OPC_MULHH_SS_SN,
-  TILE_OPC_MULHH_SU,
-  TILE_OPC_MULHH_SU_SN,
-  TILE_OPC_MULHH_UU,
-  TILE_OPC_MULHH_UU_SN,
-  TILE_OPC_MULHHA_SS,
-  TILE_OPC_MULHHA_SS_SN,
-  TILE_OPC_MULHHA_SU,
-  TILE_OPC_MULHHA_SU_SN,
-  TILE_OPC_MULHHA_UU,
-  TILE_OPC_MULHHA_UU_SN,
-  TILE_OPC_MULHHSA_UU,
-  TILE_OPC_MULHHSA_UU_SN,
-  TILE_OPC_MULHL_SS,
-  TILE_OPC_MULHL_SS_SN,
-  TILE_OPC_MULHL_SU,
-  TILE_OPC_MULHL_SU_SN,
-  TILE_OPC_MULHL_US,
-  TILE_OPC_MULHL_US_SN,
-  TILE_OPC_MULHL_UU,
-  TILE_OPC_MULHL_UU_SN,
-  TILE_OPC_MULHLA_SS,
-  TILE_OPC_MULHLA_SS_SN,
-  TILE_OPC_MULHLA_SU,
-  TILE_OPC_MULHLA_SU_SN,
-  TILE_OPC_MULHLA_US,
-  TILE_OPC_MULHLA_US_SN,
-  TILE_OPC_MULHLA_UU,
-  TILE_OPC_MULHLA_UU_SN,
-  TILE_OPC_MULHLSA_UU,
-  TILE_OPC_MULHLSA_UU_SN,
-  TILE_OPC_MULLL_SS,
-  TILE_OPC_MULLL_SS_SN,
-  TILE_OPC_MULLL_SU,
-  TILE_OPC_MULLL_SU_SN,
-  TILE_OPC_MULLL_UU,
-  TILE_OPC_MULLL_UU_SN,
-  TILE_OPC_MULLLA_SS,
-  TILE_OPC_MULLLA_SS_SN,
-  TILE_OPC_MULLLA_SU,
-  TILE_OPC_MULLLA_SU_SN,
-  TILE_OPC_MULLLA_UU,
-  TILE_OPC_MULLLA_UU_SN,
-  TILE_OPC_MULLLSA_UU,
-  TILE_OPC_MULLLSA_UU_SN,
-  TILE_OPC_MVNZ,
-  TILE_OPC_MVNZ_SN,
-  TILE_OPC_MVZ,
-  TILE_OPC_MVZ_SN,
-  TILE_OPC_MZ,
-  TILE_OPC_MZ_SN,
-  TILE_OPC_MZB,
-  TILE_OPC_MZB_SN,
-  TILE_OPC_MZH,
-  TILE_OPC_MZH_SN,
-  TILE_OPC_NAP,
-  TILE_OPC_NOP,
-  TILE_OPC_NOR,
-  TILE_OPC_NOR_SN,
-  TILE_OPC_OR,
-  TILE_OPC_OR_SN,
-  TILE_OPC_ORI,
-  TILE_OPC_ORI_SN,
-  TILE_OPC_PACKBS_U,
-  TILE_OPC_PACKBS_U_SN,
-  TILE_OPC_PACKHB,
-  TILE_OPC_PACKHB_SN,
-  TILE_OPC_PACKHS,
-  TILE_OPC_PACKHS_SN,
-  TILE_OPC_PACKLB,
-  TILE_OPC_PACKLB_SN,
-  TILE_OPC_PCNT,
-  TILE_OPC_PCNT_SN,
-  TILE_OPC_RL,
-  TILE_OPC_RL_SN,
-  TILE_OPC_RLI,
-  TILE_OPC_RLI_SN,
-  TILE_OPC_S1A,
-  TILE_OPC_S1A_SN,
-  TILE_OPC_S2A,
-  TILE_OPC_S2A_SN,
-  TILE_OPC_S3A,
-  TILE_OPC_S3A_SN,
-  TILE_OPC_SADAB_U,
-  TILE_OPC_SADAB_U_SN,
-  TILE_OPC_SADAH,
-  TILE_OPC_SADAH_SN,
-  TILE_OPC_SADAH_U,
-  TILE_OPC_SADAH_U_SN,
-  TILE_OPC_SADB_U,
-  TILE_OPC_SADB_U_SN,
-  TILE_OPC_SADH,
-  TILE_OPC_SADH_SN,
-  TILE_OPC_SADH_U,
-  TILE_OPC_SADH_U_SN,
-  TILE_OPC_SB,
-  TILE_OPC_SBADD,
-  TILE_OPC_SEQ,
-  TILE_OPC_SEQ_SN,
-  TILE_OPC_SEQB,
-  TILE_OPC_SEQB_SN,
-  TILE_OPC_SEQH,
-  TILE_OPC_SEQH_SN,
-  TILE_OPC_SEQI,
-  TILE_OPC_SEQI_SN,
-  TILE_OPC_SEQIB,
-  TILE_OPC_SEQIB_SN,
-  TILE_OPC_SEQIH,
-  TILE_OPC_SEQIH_SN,
-  TILE_OPC_SH,
-  TILE_OPC_SHADD,
-  TILE_OPC_SHL,
-  TILE_OPC_SHL_SN,
-  TILE_OPC_SHLB,
-  TILE_OPC_SHLB_SN,
-  TILE_OPC_SHLH,
-  TILE_OPC_SHLH_SN,
-  TILE_OPC_SHLI,
-  TILE_OPC_SHLI_SN,
-  TILE_OPC_SHLIB,
-  TILE_OPC_SHLIB_SN,
-  TILE_OPC_SHLIH,
-  TILE_OPC_SHLIH_SN,
-  TILE_OPC_SHR,
-  TILE_OPC_SHR_SN,
-  TILE_OPC_SHRB,
-  TILE_OPC_SHRB_SN,
-  TILE_OPC_SHRH,
-  TILE_OPC_SHRH_SN,
-  TILE_OPC_SHRI,
-  TILE_OPC_SHRI_SN,
-  TILE_OPC_SHRIB,
-  TILE_OPC_SHRIB_SN,
-  TILE_OPC_SHRIH,
-  TILE_OPC_SHRIH_SN,
-  TILE_OPC_SLT,
-  TILE_OPC_SLT_SN,
-  TILE_OPC_SLT_U,
-  TILE_OPC_SLT_U_SN,
-  TILE_OPC_SLTB,
-  TILE_OPC_SLTB_SN,
-  TILE_OPC_SLTB_U,
-  TILE_OPC_SLTB_U_SN,
-  TILE_OPC_SLTE,
-  TILE_OPC_SLTE_SN,
-  TILE_OPC_SLTE_U,
-  TILE_OPC_SLTE_U_SN,
-  TILE_OPC_SLTEB,
-  TILE_OPC_SLTEB_SN,
-  TILE_OPC_SLTEB_U,
-  TILE_OPC_SLTEB_U_SN,
-  TILE_OPC_SLTEH,
-  TILE_OPC_SLTEH_SN,
-  TILE_OPC_SLTEH_U,
-  TILE_OPC_SLTEH_U_SN,
-  TILE_OPC_SLTH,
-  TILE_OPC_SLTH_SN,
-  TILE_OPC_SLTH_U,
-  TILE_OPC_SLTH_U_SN,
-  TILE_OPC_SLTI,
-  TILE_OPC_SLTI_SN,
-  TILE_OPC_SLTI_U,
-  TILE_OPC_SLTI_U_SN,
-  TILE_OPC_SLTIB,
-  TILE_OPC_SLTIB_SN,
-  TILE_OPC_SLTIB_U,
-  TILE_OPC_SLTIB_U_SN,
-  TILE_OPC_SLTIH,
-  TILE_OPC_SLTIH_SN,
-  TILE_OPC_SLTIH_U,
-  TILE_OPC_SLTIH_U_SN,
-  TILE_OPC_SNE,
-  TILE_OPC_SNE_SN,
-  TILE_OPC_SNEB,
-  TILE_OPC_SNEB_SN,
-  TILE_OPC_SNEH,
-  TILE_OPC_SNEH_SN,
-  TILE_OPC_SRA,
-  TILE_OPC_SRA_SN,
-  TILE_OPC_SRAB,
-  TILE_OPC_SRAB_SN,
-  TILE_OPC_SRAH,
-  TILE_OPC_SRAH_SN,
-  TILE_OPC_SRAI,
-  TILE_OPC_SRAI_SN,
-  TILE_OPC_SRAIB,
-  TILE_OPC_SRAIB_SN,
-  TILE_OPC_SRAIH,
-  TILE_OPC_SRAIH_SN,
-  TILE_OPC_SUB,
-  TILE_OPC_SUB_SN,
-  TILE_OPC_SUBB,
-  TILE_OPC_SUBB_SN,
-  TILE_OPC_SUBBS_U,
-  TILE_OPC_SUBBS_U_SN,
-  TILE_OPC_SUBH,
-  TILE_OPC_SUBH_SN,
-  TILE_OPC_SUBHS,
-  TILE_OPC_SUBHS_SN,
-  TILE_OPC_SUBS,
-  TILE_OPC_SUBS_SN,
-  TILE_OPC_SW,
-  TILE_OPC_SWADD,
-  TILE_OPC_SWINT0,
-  TILE_OPC_SWINT1,
-  TILE_OPC_SWINT2,
-  TILE_OPC_SWINT3,
-  TILE_OPC_TBLIDXB0,
-  TILE_OPC_TBLIDXB0_SN,
-  TILE_OPC_TBLIDXB1,
-  TILE_OPC_TBLIDXB1_SN,
-  TILE_OPC_TBLIDXB2,
-  TILE_OPC_TBLIDXB2_SN,
-  TILE_OPC_TBLIDXB3,
-  TILE_OPC_TBLIDXB3_SN,
-  TILE_OPC_TNS,
-  TILE_OPC_TNS_SN,
-  TILE_OPC_WH64,
-  TILE_OPC_XOR,
-  TILE_OPC_XOR_SN,
-  TILE_OPC_XORI,
-  TILE_OPC_XORI_SN,
-  TILE_OPC_NONE
-} tile_mnemonic;
-
-/* 64-bit pattern for a { bpt ; nop } bundle. */
-#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL
-
-
-#define TILE_ELF_MACHINE_CODE EM_TILEPRO
-
-#define TILE_ELF_NAME "elf32-tilepro"
-
-
-static __inline unsigned int
-get_BrOff_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_BrOff_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x00007fff) |
-         (((unsigned int)(n >> 20)) & 0x00018000);
-}
-
-static __inline unsigned int
-get_BrType_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0xf);
-}
-
-static __inline unsigned int
-get_Dest_Imm8_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x0000003f) |
-         (((unsigned int)(n >> 43)) & 0x000000c0);
-}
-
-static __inline unsigned int
-get_Dest_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 2)) & 0x3);
-}
-
-static __inline unsigned int
-get_Dest_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Imm16_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xffff);
-}
-
-static __inline unsigned int
-get_Imm16_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xffff);
-}
-
-static __inline unsigned int
-get_Imm8_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xff);
-}
-
-static __inline unsigned int
-get_ImmOpcodeExtension_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 20)) & 0x7f);
-}
-
-static __inline unsigned int
-get_ImmOpcodeExtension_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 51)) & 0x7f);
-}
-
-static __inline unsigned int
-get_ImmRROpcodeExtension_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 8)) & 0x3);
-}
-
-static __inline unsigned int
-get_JOffLong_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x00007fff) |
-         (((unsigned int)(n >> 20)) & 0x00018000) |
-         (((unsigned int)(n >> 14)) & 0x001e0000) |
-         (((unsigned int)(n >> 16)) & 0x07e00000) |
-         (((unsigned int)(n >> 31)) & 0x18000000);
-}
-
-static __inline unsigned int
-get_JOff_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x00007fff) |
-         (((unsigned int)(n >> 20)) & 0x00018000) |
-         (((unsigned int)(n >> 14)) & 0x001e0000) |
-         (((unsigned int)(n >> 16)) & 0x07e00000) |
-         (((unsigned int)(n >> 31)) & 0x08000000);
-}
-
-static __inline unsigned int
-get_MF_Imm15_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x00003fff) |
-         (((unsigned int)(n >> 44)) & 0x00004000);
-}
-
-static __inline unsigned int
-get_MMEnd_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x1f);
-}
-
-static __inline unsigned int
-get_MMEnd_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x1f);
-}
-
-static __inline unsigned int
-get_MMStart_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 23)) & 0x1f);
-}
-
-static __inline unsigned int
-get_MMStart_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 54)) & 0x1f);
-}
-
-static __inline unsigned int
-get_MT_Imm15_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x0000003f) |
-         (((unsigned int)(n >> 37)) & 0x00003fc0) |
-         (((unsigned int)(n >> 44)) & 0x00004000);
-}
-
-static __inline unsigned int
-get_Mode(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 63)) & 0x1);
-}
-
-static __inline unsigned int
-get_NoRegOpcodeExtension_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 10)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Opcode_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 28)) & 0x7);
-}
-
-static __inline unsigned int
-get_Opcode_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 59)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 27)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 59)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_Y2(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 56)) & 0x7);
-}
-
-static __inline unsigned int
-get_RROpcodeExtension_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 4)) & 0xf);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x1ff);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x1ff);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x3);
-}
-
-static __inline unsigned int
-get_RouteOpcodeExtension_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_S_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 27)) & 0x1);
-}
-
-static __inline unsigned int
-get_S_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 58)) & 0x1);
-}
-
-static __inline unsigned int
-get_ShAmt_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x1f);
-}
-
-static __inline unsigned int
-get_ShAmt_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x1f);
-}
-
-static __inline unsigned int
-get_ShAmt_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x1f);
-}
-
-static __inline unsigned int
-get_ShAmt_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x1f);
-}
-
-static __inline unsigned int
-get_SrcA_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 6)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 6)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y2(tile_bundle_bits n)
-{
-  return (((n >> 26)) & 0x00000001) |
-         (((unsigned int)(n >> 50)) & 0x0000003e);
-}
-
-static __inline unsigned int
-get_SrcBDest_Y2(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 20)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Src_SN(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3);
-}
-
-static __inline unsigned int
-get_UnOpcodeExtension_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x1f);
-}
-
-static __inline unsigned int
-get_UnOpcodeExtension_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x1f);
-}
-
-static __inline unsigned int
-get_UnOpcodeExtension_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x1f);
-}
-
-static __inline unsigned int
-get_UnOpcodeExtension_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x1f);
-}
-
-static __inline unsigned int
-get_UnShOpcodeExtension_X0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 17)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_UnShOpcodeExtension_X1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 48)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_UnShOpcodeExtension_Y0(tile_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 17)) & 0x7);
-}
-
-static __inline unsigned int
-get_UnShOpcodeExtension_Y1(tile_bundle_bits n)
-{
-  return (((unsigned int)(n >> 48)) & 0x7);
-}
-
-
-static __inline int
-sign_extend(int n, int num_bits)
-{
-  int shift = (int)(sizeof(int) * 8 - num_bits);
-  return (n << shift) >> shift;
-}
-
-
-
-static __inline tile_bundle_bits
-create_BrOff_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3ff) << 0);
-}
-
-static __inline tile_bundle_bits
-create_BrOff_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
-         (((tile_bundle_bits)(n & 0x00018000)) << 20);
-}
-
-static __inline tile_bundle_bits
-create_BrType_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xf)) << 31);
-}
-
-static __inline tile_bundle_bits
-create_Dest_Imm8_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
-         (((tile_bundle_bits)(n & 0x000000c0)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_Dest_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 2);
-}
-
-static __inline tile_bundle_bits
-create_Dest_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 0);
-}
-
-static __inline tile_bundle_bits
-create_Dest_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 31);
-}
-
-static __inline tile_bundle_bits
-create_Dest_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 0);
-}
-
-static __inline tile_bundle_bits
-create_Dest_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 31);
-}
-
-static __inline tile_bundle_bits
-create_Imm16_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xffff) << 12);
-}
-
-static __inline tile_bundle_bits
-create_Imm16_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xffff)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_Imm8_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 0);
-}
-
-static __inline tile_bundle_bits
-create_Imm8_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 12);
-}
-
-static __inline tile_bundle_bits
-create_Imm8_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xff)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_Imm8_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 12);
-}
-
-static __inline tile_bundle_bits
-create_Imm8_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xff)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_ImmOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x7f) << 20);
-}
-
-static __inline tile_bundle_bits
-create_ImmOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x7f)) << 51);
-}
-
-static __inline tile_bundle_bits
-create_ImmRROpcodeExtension_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 8);
-}
-
-static __inline tile_bundle_bits
-create_JOffLong_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
-         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
-         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
-         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
-         (((tile_bundle_bits)(n & 0x18000000)) << 31);
-}
-
-static __inline tile_bundle_bits
-create_JOff_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
-         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
-         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
-         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
-         (((tile_bundle_bits)(n & 0x08000000)) << 31);
-}
-
-static __inline tile_bundle_bits
-create_MF_Imm15_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x00003fff)) << 37) |
-         (((tile_bundle_bits)(n & 0x00004000)) << 44);
-}
-
-static __inline tile_bundle_bits
-create_MMEnd_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 18);
-}
-
-static __inline tile_bundle_bits
-create_MMEnd_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 49);
-}
-
-static __inline tile_bundle_bits
-create_MMStart_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 23);
-}
-
-static __inline tile_bundle_bits
-create_MMStart_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 54);
-}
-
-static __inline tile_bundle_bits
-create_MT_Imm15_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
-         (((tile_bundle_bits)(n & 0x00003fc0)) << 37) |
-         (((tile_bundle_bits)(n & 0x00004000)) << 44);
-}
-
-static __inline tile_bundle_bits
-create_Mode(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1)) << 63);
-}
-
-static __inline tile_bundle_bits
-create_NoRegOpcodeExtension_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xf) << 0);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 10);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x7) << 28);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xf)) << 59);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xf) << 27);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0xf)) << 59);
-}
-
-static __inline tile_bundle_bits
-create_Opcode_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x7)) << 56);
-}
-
-static __inline tile_bundle_bits
-create_RROpcodeExtension_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xf) << 4);
-}
-
-static __inline tile_bundle_bits
-create_RRROpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1ff) << 18);
-}
-
-static __inline tile_bundle_bits
-create_RRROpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1ff)) << 49);
-}
-
-static __inline tile_bundle_bits
-create_RRROpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 18);
-}
-
-static __inline tile_bundle_bits
-create_RRROpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3)) << 49);
-}
-
-static __inline tile_bundle_bits
-create_RouteOpcodeExtension_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3ff) << 0);
-}
-
-static __inline tile_bundle_bits
-create_S_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1) << 27);
-}
-
-static __inline tile_bundle_bits
-create_S_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1)) << 58);
-}
-
-static __inline tile_bundle_bits
-create_ShAmt_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_ShAmt_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_ShAmt_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_ShAmt_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_SrcA_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 6);
-}
-
-static __inline tile_bundle_bits
-create_SrcA_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 37);
-}
-
-static __inline tile_bundle_bits
-create_SrcA_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 6);
-}
-
-static __inline tile_bundle_bits
-create_SrcA_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 37);
-}
-
-static __inline tile_bundle_bits
-create_SrcA_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x00000001) << 26) |
-         (((tile_bundle_bits)(n & 0x0000003e)) << 50);
-}
-
-static __inline tile_bundle_bits
-create_SrcBDest_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 20);
-}
-
-static __inline tile_bundle_bits
-create_SrcB_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_SrcB_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_SrcB_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_SrcB_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_Src_SN(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 0);
-}
-
-static __inline tile_bundle_bits
-create_UnOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_UnOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_UnOpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x1f) << 12);
-}
-
-static __inline tile_bundle_bits
-create_UnOpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x1f)) << 43);
-}
-
-static __inline tile_bundle_bits
-create_UnShOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3ff) << 17);
-}
-
-static __inline tile_bundle_bits
-create_UnShOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x3ff)) << 48);
-}
-
-static __inline tile_bundle_bits
-create_UnShOpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x7) << 17);
-}
-
-static __inline tile_bundle_bits
-create_UnShOpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tile_bundle_bits)(n & 0x7)) << 48);
-}
-
-
-
-typedef enum
-{
-  TILE_PIPELINE_X0,
-  TILE_PIPELINE_X1,
-  TILE_PIPELINE_Y0,
-  TILE_PIPELINE_Y1,
-  TILE_PIPELINE_Y2,
-} tile_pipeline;
-
-#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1)
-
-typedef enum
-{
-  TILE_OP_TYPE_REGISTER,
-  TILE_OP_TYPE_IMMEDIATE,
-  TILE_OP_TYPE_ADDRESS,
-  TILE_OP_TYPE_SPR
-} tile_operand_type;
-
-/* This is the bit that determines if a bundle is in the Y encoding. */
-#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63)
-
-enum
-{
-  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
-  TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
-
-  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
-  TILE_NUM_PIPELINE_ENCODINGS = 5,
-
-  /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */
-  TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
-
-  /* Instructions take this many bytes. */
-  TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES,
-
-  /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */
-  TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
-
-  /* Bundles should be aligned modulo this number of bytes. */
-  TILE_BUNDLE_ALIGNMENT_IN_BYTES =
-    (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
-
-  /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */
-  TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
-
-  /* Static network instructions take this many bytes. */
-  TILE_SN_INSTRUCTION_SIZE_IN_BYTES =
-    (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
-
-  /* Number of registers (some are magic, such as network I/O). */
-  TILE_NUM_REGISTERS = 64,
-
-  /* Number of static network registers. */
-  TILE_NUM_SN_REGISTERS = 4
-};
-
-
-struct tile_operand
-{
-  /* Is this operand a register, immediate or address? */
-  tile_operand_type type;
-
-  /* The default relocation type for this operand.  */
-  signed int default_reloc : 16;
-
-  /* How many bits is this value? (used for range checking) */
-  unsigned int num_bits : 5;
-
-  /* Is the value signed? (used for range checking) */
-  unsigned int is_signed : 1;
-
-  /* Is this operand a source register? */
-  unsigned int is_src_reg : 1;
-
-  /* Is this operand written? (i.e. is it a destination register) */
-  unsigned int is_dest_reg : 1;
-
-  /* Is this operand PC-relative? */
-  unsigned int is_pc_relative : 1;
-
-  /* By how many bits do we right shift the value before inserting? */
-  unsigned int rightshift : 2;
-
-  /* Return the bits for this operand to be ORed into an existing bundle. */
-  tile_bundle_bits (*insert) (int op);
-
-  /* Extract this operand and return it. */
-  unsigned int (*extract) (tile_bundle_bits bundle);
-};
-
-
-extern const struct tile_operand tile_operands[];
-
-/* One finite-state machine per pipe for rapid instruction decoding. */
-extern const unsigned short * const
-tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS];
-
-
-struct tile_opcode
-{
-  /* The opcode mnemonic, e.g. "add" */
-  const char *name;
-
-  /* The enum value for this mnemonic. */
-  tile_mnemonic mnemonic;
-
-  /* A bit mask of which of the five pipes this instruction
-     is compatible with:
-     X0  0x01
-     X1  0x02
-     Y0  0x04
-     Y1  0x08
-     Y2  0x10 */
-  unsigned char pipes;
-
-  /* How many operands are there? */
-  unsigned char num_operands;
-
-  /* Which register does this write implicitly, or TREG_ZERO if none? */
-  unsigned char implicitly_written_register;
-
-  /* Can this be bundled with other instructions (almost always true). */
-  unsigned char can_bundle;
-
-  /* The description of the operands. Each of these is an
-   * index into the tile_operands[] table. */
-  unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS];
-
-};
-
-extern const struct tile_opcode tile_opcodes[];
-
-
-/* Used for non-textual disassembly into structs. */
-struct tile_decoded_instruction
-{
-  const struct tile_opcode *opcode;
-  const struct tile_operand *operands[TILE_MAX_OPERANDS];
-  int operand_values[TILE_MAX_OPERANDS];
-};
-
-
-/* Disassemble a bundle into a struct for machine processing. */
-extern int parse_insn_tile(tile_bundle_bits bits,
-                           unsigned int pc,
-                           struct tile_decoded_instruction
-                           decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]);
-
-
-/* Given a set of bundle bits and a specific pipe, returns which
- * instruction the bundle contains in that pipe.
- */
-extern const struct tile_opcode *
-find_opcode(tile_bundle_bits bits, tile_pipeline pipe);
-
-
-
-#endif /* opcode_tile_h */
diff --git a/arch/tile/include/asm/opcode-tile_64.h b/arch/tile/include/asm/opcode-tile_64.h
deleted file mode 100644
index c063346..0000000
--- a/arch/tile/include/asm/opcode-tile_64.h
+++ /dev/null
@@ -1,1248 +0,0 @@
-/* tile.h -- Header file for TILE opcode table
-   Copyright (C) 2005 Free Software Foundation, Inc.
-   Contributed by Tilera Corp. */
-
-#ifndef opcode_tile_h
-#define opcode_tile_h
-
-typedef unsigned long long tilegx_bundle_bits;
-
-
-enum
-{
-  TILEGX_MAX_OPERANDS = 4 /* bfexts */
-};
-
-typedef enum
-{
-  TILEGX_OPC_BPT,
-  TILEGX_OPC_INFO,
-  TILEGX_OPC_INFOL,
-  TILEGX_OPC_MOVE,
-  TILEGX_OPC_MOVEI,
-  TILEGX_OPC_MOVELI,
-  TILEGX_OPC_PREFETCH,
-  TILEGX_OPC_PREFETCH_ADD_L1,
-  TILEGX_OPC_PREFETCH_ADD_L1_FAULT,
-  TILEGX_OPC_PREFETCH_ADD_L2,
-  TILEGX_OPC_PREFETCH_ADD_L2_FAULT,
-  TILEGX_OPC_PREFETCH_ADD_L3,
-  TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
-  TILEGX_OPC_PREFETCH_L1,
-  TILEGX_OPC_PREFETCH_L1_FAULT,
-  TILEGX_OPC_PREFETCH_L2,
-  TILEGX_OPC_PREFETCH_L2_FAULT,
-  TILEGX_OPC_PREFETCH_L3,
-  TILEGX_OPC_PREFETCH_L3_FAULT,
-  TILEGX_OPC_RAISE,
-  TILEGX_OPC_ADD,
-  TILEGX_OPC_ADDI,
-  TILEGX_OPC_ADDLI,
-  TILEGX_OPC_ADDX,
-  TILEGX_OPC_ADDXI,
-  TILEGX_OPC_ADDXLI,
-  TILEGX_OPC_ADDXSC,
-  TILEGX_OPC_AND,
-  TILEGX_OPC_ANDI,
-  TILEGX_OPC_BEQZ,
-  TILEGX_OPC_BEQZT,
-  TILEGX_OPC_BFEXTS,
-  TILEGX_OPC_BFEXTU,
-  TILEGX_OPC_BFINS,
-  TILEGX_OPC_BGEZ,
-  TILEGX_OPC_BGEZT,
-  TILEGX_OPC_BGTZ,
-  TILEGX_OPC_BGTZT,
-  TILEGX_OPC_BLBC,
-  TILEGX_OPC_BLBCT,
-  TILEGX_OPC_BLBS,
-  TILEGX_OPC_BLBST,
-  TILEGX_OPC_BLEZ,
-  TILEGX_OPC_BLEZT,
-  TILEGX_OPC_BLTZ,
-  TILEGX_OPC_BLTZT,
-  TILEGX_OPC_BNEZ,
-  TILEGX_OPC_BNEZT,
-  TILEGX_OPC_CLZ,
-  TILEGX_OPC_CMOVEQZ,
-  TILEGX_OPC_CMOVNEZ,
-  TILEGX_OPC_CMPEQ,
-  TILEGX_OPC_CMPEQI,
-  TILEGX_OPC_CMPEXCH,
-  TILEGX_OPC_CMPEXCH4,
-  TILEGX_OPC_CMPLES,
-  TILEGX_OPC_CMPLEU,
-  TILEGX_OPC_CMPLTS,
-  TILEGX_OPC_CMPLTSI,
-  TILEGX_OPC_CMPLTU,
-  TILEGX_OPC_CMPLTUI,
-  TILEGX_OPC_CMPNE,
-  TILEGX_OPC_CMUL,
-  TILEGX_OPC_CMULA,
-  TILEGX_OPC_CMULAF,
-  TILEGX_OPC_CMULF,
-  TILEGX_OPC_CMULFR,
-  TILEGX_OPC_CMULH,
-  TILEGX_OPC_CMULHR,
-  TILEGX_OPC_CRC32_32,
-  TILEGX_OPC_CRC32_8,
-  TILEGX_OPC_CTZ,
-  TILEGX_OPC_DBLALIGN,
-  TILEGX_OPC_DBLALIGN2,
-  TILEGX_OPC_DBLALIGN4,
-  TILEGX_OPC_DBLALIGN6,
-  TILEGX_OPC_DRAIN,
-  TILEGX_OPC_DTLBPR,
-  TILEGX_OPC_EXCH,
-  TILEGX_OPC_EXCH4,
-  TILEGX_OPC_FDOUBLE_ADD_FLAGS,
-  TILEGX_OPC_FDOUBLE_ADDSUB,
-  TILEGX_OPC_FDOUBLE_MUL_FLAGS,
-  TILEGX_OPC_FDOUBLE_PACK1,
-  TILEGX_OPC_FDOUBLE_PACK2,
-  TILEGX_OPC_FDOUBLE_SUB_FLAGS,
-  TILEGX_OPC_FDOUBLE_UNPACK_MAX,
-  TILEGX_OPC_FDOUBLE_UNPACK_MIN,
-  TILEGX_OPC_FETCHADD,
-  TILEGX_OPC_FETCHADD4,
-  TILEGX_OPC_FETCHADDGEZ,
-  TILEGX_OPC_FETCHADDGEZ4,
-  TILEGX_OPC_FETCHAND,
-  TILEGX_OPC_FETCHAND4,
-  TILEGX_OPC_FETCHOR,
-  TILEGX_OPC_FETCHOR4,
-  TILEGX_OPC_FINV,
-  TILEGX_OPC_FLUSH,
-  TILEGX_OPC_FLUSHWB,
-  TILEGX_OPC_FNOP,
-  TILEGX_OPC_FSINGLE_ADD1,
-  TILEGX_OPC_FSINGLE_ADDSUB2,
-  TILEGX_OPC_FSINGLE_MUL1,
-  TILEGX_OPC_FSINGLE_MUL2,
-  TILEGX_OPC_FSINGLE_PACK1,
-  TILEGX_OPC_FSINGLE_PACK2,
-  TILEGX_OPC_FSINGLE_SUB1,
-  TILEGX_OPC_ICOH,
-  TILEGX_OPC_ILL,
-  TILEGX_OPC_INV,
-  TILEGX_OPC_IRET,
-  TILEGX_OPC_J,
-  TILEGX_OPC_JAL,
-  TILEGX_OPC_JALR,
-  TILEGX_OPC_JALRP,
-  TILEGX_OPC_JR,
-  TILEGX_OPC_JRP,
-  TILEGX_OPC_LD,
-  TILEGX_OPC_LD1S,
-  TILEGX_OPC_LD1S_ADD,
-  TILEGX_OPC_LD1U,
-  TILEGX_OPC_LD1U_ADD,
-  TILEGX_OPC_LD2S,
-  TILEGX_OPC_LD2S_ADD,
-  TILEGX_OPC_LD2U,
-  TILEGX_OPC_LD2U_ADD,
-  TILEGX_OPC_LD4S,
-  TILEGX_OPC_LD4S_ADD,
-  TILEGX_OPC_LD4U,
-  TILEGX_OPC_LD4U_ADD,
-  TILEGX_OPC_LD_ADD,
-  TILEGX_OPC_LDNA,
-  TILEGX_OPC_LDNA_ADD,
-  TILEGX_OPC_LDNT,
-  TILEGX_OPC_LDNT1S,
-  TILEGX_OPC_LDNT1S_ADD,
-  TILEGX_OPC_LDNT1U,
-  TILEGX_OPC_LDNT1U_ADD,
-  TILEGX_OPC_LDNT2S,
-  TILEGX_OPC_LDNT2S_ADD,
-  TILEGX_OPC_LDNT2U,
-  TILEGX_OPC_LDNT2U_ADD,
-  TILEGX_OPC_LDNT4S,
-  TILEGX_OPC_LDNT4S_ADD,
-  TILEGX_OPC_LDNT4U,
-  TILEGX_OPC_LDNT4U_ADD,
-  TILEGX_OPC_LDNT_ADD,
-  TILEGX_OPC_LNK,
-  TILEGX_OPC_MF,
-  TILEGX_OPC_MFSPR,
-  TILEGX_OPC_MM,
-  TILEGX_OPC_MNZ,
-  TILEGX_OPC_MTSPR,
-  TILEGX_OPC_MUL_HS_HS,
-  TILEGX_OPC_MUL_HS_HU,
-  TILEGX_OPC_MUL_HS_LS,
-  TILEGX_OPC_MUL_HS_LU,
-  TILEGX_OPC_MUL_HU_HU,
-  TILEGX_OPC_MUL_HU_LS,
-  TILEGX_OPC_MUL_HU_LU,
-  TILEGX_OPC_MUL_LS_LS,
-  TILEGX_OPC_MUL_LS_LU,
-  TILEGX_OPC_MUL_LU_LU,
-  TILEGX_OPC_MULA_HS_HS,
-  TILEGX_OPC_MULA_HS_HU,
-  TILEGX_OPC_MULA_HS_LS,
-  TILEGX_OPC_MULA_HS_LU,
-  TILEGX_OPC_MULA_HU_HU,
-  TILEGX_OPC_MULA_HU_LS,
-  TILEGX_OPC_MULA_HU_LU,
-  TILEGX_OPC_MULA_LS_LS,
-  TILEGX_OPC_MULA_LS_LU,
-  TILEGX_OPC_MULA_LU_LU,
-  TILEGX_OPC_MULAX,
-  TILEGX_OPC_MULX,
-  TILEGX_OPC_MZ,
-  TILEGX_OPC_NAP,
-  TILEGX_OPC_NOP,
-  TILEGX_OPC_NOR,
-  TILEGX_OPC_OR,
-  TILEGX_OPC_ORI,
-  TILEGX_OPC_PCNT,
-  TILEGX_OPC_REVBITS,
-  TILEGX_OPC_REVBYTES,
-  TILEGX_OPC_ROTL,
-  TILEGX_OPC_ROTLI,
-  TILEGX_OPC_SHL,
-  TILEGX_OPC_SHL16INSLI,
-  TILEGX_OPC_SHL1ADD,
-  TILEGX_OPC_SHL1ADDX,
-  TILEGX_OPC_SHL2ADD,
-  TILEGX_OPC_SHL2ADDX,
-  TILEGX_OPC_SHL3ADD,
-  TILEGX_OPC_SHL3ADDX,
-  TILEGX_OPC_SHLI,
-  TILEGX_OPC_SHLX,
-  TILEGX_OPC_SHLXI,
-  TILEGX_OPC_SHRS,
-  TILEGX_OPC_SHRSI,
-  TILEGX_OPC_SHRU,
-  TILEGX_OPC_SHRUI,
-  TILEGX_OPC_SHRUX,
-  TILEGX_OPC_SHRUXI,
-  TILEGX_OPC_SHUFFLEBYTES,
-  TILEGX_OPC_ST,
-  TILEGX_OPC_ST1,
-  TILEGX_OPC_ST1_ADD,
-  TILEGX_OPC_ST2,
-  TILEGX_OPC_ST2_ADD,
-  TILEGX_OPC_ST4,
-  TILEGX_OPC_ST4_ADD,
-  TILEGX_OPC_ST_ADD,
-  TILEGX_OPC_STNT,
-  TILEGX_OPC_STNT1,
-  TILEGX_OPC_STNT1_ADD,
-  TILEGX_OPC_STNT2,
-  TILEGX_OPC_STNT2_ADD,
-  TILEGX_OPC_STNT4,
-  TILEGX_OPC_STNT4_ADD,
-  TILEGX_OPC_STNT_ADD,
-  TILEGX_OPC_SUB,
-  TILEGX_OPC_SUBX,
-  TILEGX_OPC_SUBXSC,
-  TILEGX_OPC_SWINT0,
-  TILEGX_OPC_SWINT1,
-  TILEGX_OPC_SWINT2,
-  TILEGX_OPC_SWINT3,
-  TILEGX_OPC_TBLIDXB0,
-  TILEGX_OPC_TBLIDXB1,
-  TILEGX_OPC_TBLIDXB2,
-  TILEGX_OPC_TBLIDXB3,
-  TILEGX_OPC_V1ADD,
-  TILEGX_OPC_V1ADDI,
-  TILEGX_OPC_V1ADDUC,
-  TILEGX_OPC_V1ADIFFU,
-  TILEGX_OPC_V1AVGU,
-  TILEGX_OPC_V1CMPEQ,
-  TILEGX_OPC_V1CMPEQI,
-  TILEGX_OPC_V1CMPLES,
-  TILEGX_OPC_V1CMPLEU,
-  TILEGX_OPC_V1CMPLTS,
-  TILEGX_OPC_V1CMPLTSI,
-  TILEGX_OPC_V1CMPLTU,
-  TILEGX_OPC_V1CMPLTUI,
-  TILEGX_OPC_V1CMPNE,
-  TILEGX_OPC_V1DDOTPU,
-  TILEGX_OPC_V1DDOTPUA,
-  TILEGX_OPC_V1DDOTPUS,
-  TILEGX_OPC_V1DDOTPUSA,
-  TILEGX_OPC_V1DOTP,
-  TILEGX_OPC_V1DOTPA,
-  TILEGX_OPC_V1DOTPU,
-  TILEGX_OPC_V1DOTPUA,
-  TILEGX_OPC_V1DOTPUS,
-  TILEGX_OPC_V1DOTPUSA,
-  TILEGX_OPC_V1INT_H,
-  TILEGX_OPC_V1INT_L,
-  TILEGX_OPC_V1MAXU,
-  TILEGX_OPC_V1MAXUI,
-  TILEGX_OPC_V1MINU,
-  TILEGX_OPC_V1MINUI,
-  TILEGX_OPC_V1MNZ,
-  TILEGX_OPC_V1MULTU,
-  TILEGX_OPC_V1MULU,
-  TILEGX_OPC_V1MULUS,
-  TILEGX_OPC_V1MZ,
-  TILEGX_OPC_V1SADAU,
-  TILEGX_OPC_V1SADU,
-  TILEGX_OPC_V1SHL,
-  TILEGX_OPC_V1SHLI,
-  TILEGX_OPC_V1SHRS,
-  TILEGX_OPC_V1SHRSI,
-  TILEGX_OPC_V1SHRU,
-  TILEGX_OPC_V1SHRUI,
-  TILEGX_OPC_V1SUB,
-  TILEGX_OPC_V1SUBUC,
-  TILEGX_OPC_V2ADD,
-  TILEGX_OPC_V2ADDI,
-  TILEGX_OPC_V2ADDSC,
-  TILEGX_OPC_V2ADIFFS,
-  TILEGX_OPC_V2AVGS,
-  TILEGX_OPC_V2CMPEQ,
-  TILEGX_OPC_V2CMPEQI,
-  TILEGX_OPC_V2CMPLES,
-  TILEGX_OPC_V2CMPLEU,
-  TILEGX_OPC_V2CMPLTS,
-  TILEGX_OPC_V2CMPLTSI,
-  TILEGX_OPC_V2CMPLTU,
-  TILEGX_OPC_V2CMPLTUI,
-  TILEGX_OPC_V2CMPNE,
-  TILEGX_OPC_V2DOTP,
-  TILEGX_OPC_V2DOTPA,
-  TILEGX_OPC_V2INT_H,
-  TILEGX_OPC_V2INT_L,
-  TILEGX_OPC_V2MAXS,
-  TILEGX_OPC_V2MAXSI,
-  TILEGX_OPC_V2MINS,
-  TILEGX_OPC_V2MINSI,
-  TILEGX_OPC_V2MNZ,
-  TILEGX_OPC_V2MULFSC,
-  TILEGX_OPC_V2MULS,
-  TILEGX_OPC_V2MULTS,
-  TILEGX_OPC_V2MZ,
-  TILEGX_OPC_V2PACKH,
-  TILEGX_OPC_V2PACKL,
-  TILEGX_OPC_V2PACKUC,
-  TILEGX_OPC_V2SADAS,
-  TILEGX_OPC_V2SADAU,
-  TILEGX_OPC_V2SADS,
-  TILEGX_OPC_V2SADU,
-  TILEGX_OPC_V2SHL,
-  TILEGX_OPC_V2SHLI,
-  TILEGX_OPC_V2SHLSC,
-  TILEGX_OPC_V2SHRS,
-  TILEGX_OPC_V2SHRSI,
-  TILEGX_OPC_V2SHRU,
-  TILEGX_OPC_V2SHRUI,
-  TILEGX_OPC_V2SUB,
-  TILEGX_OPC_V2SUBSC,
-  TILEGX_OPC_V4ADD,
-  TILEGX_OPC_V4ADDSC,
-  TILEGX_OPC_V4INT_H,
-  TILEGX_OPC_V4INT_L,
-  TILEGX_OPC_V4PACKSC,
-  TILEGX_OPC_V4SHL,
-  TILEGX_OPC_V4SHLSC,
-  TILEGX_OPC_V4SHRS,
-  TILEGX_OPC_V4SHRU,
-  TILEGX_OPC_V4SUB,
-  TILEGX_OPC_V4SUBSC,
-  TILEGX_OPC_WH64,
-  TILEGX_OPC_XOR,
-  TILEGX_OPC_XORI,
-  TILEGX_OPC_NONE
-} tilegx_mnemonic;
-
-/* 64-bit pattern for a { bpt ; nop } bundle. */
-#define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL
-
-
-#define TILE_ELF_MACHINE_CODE EM_TILE64
-
-#define TILE_ELF_NAME "elf32-tile64"
-
-
-static __inline unsigned int
-get_BFEnd_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_BFOpcodeExtension_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 24)) & 0xf);
-}
-
-static __inline unsigned int
-get_BFStart_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3f);
-}
-
-static __inline unsigned int
-get_BrOff_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x0000003f) |
-         (((unsigned int)(n >> 37)) & 0x0001ffc0);
-}
-
-static __inline unsigned int
-get_BrType_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 54)) & 0x1f);
-}
-
-static __inline unsigned int
-get_Dest_Imm8_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x0000003f) |
-         (((unsigned int)(n >> 43)) & 0x000000c0);
-}
-
-static __inline unsigned int
-get_Dest_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 0)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Dest_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x3f);
-}
-
-static __inline unsigned int
-get_Imm16_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xffff);
-}
-
-static __inline unsigned int
-get_Imm16_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xffff);
-}
-
-static __inline unsigned int
-get_Imm8OpcodeExtension_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 20)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8OpcodeExtension_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 51)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0xff);
-}
-
-static __inline unsigned int
-get_Imm8_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0xff);
-}
-
-static __inline unsigned int
-get_JumpOff_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x7ffffff);
-}
-
-static __inline unsigned int
-get_JumpOpcodeExtension_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 58)) & 0x1);
-}
-
-static __inline unsigned int
-get_MF_Imm14_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x3fff);
-}
-
-static __inline unsigned int
-get_MT_Imm14_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 31)) & 0x0000003f) |
-         (((unsigned int)(n >> 37)) & 0x00003fc0);
-}
-
-static __inline unsigned int
-get_Mode(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 62)) & 0x3);
-}
-
-static __inline unsigned int
-get_Opcode_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 28)) & 0x7);
-}
-
-static __inline unsigned int
-get_Opcode_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 59)) & 0x7);
-}
-
-static __inline unsigned int
-get_Opcode_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 27)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 58)) & 0xf);
-}
-
-static __inline unsigned int
-get_Opcode_Y2(tilegx_bundle_bits n)
-{
-  return (((n >> 26)) & 0x00000001) |
-         (((unsigned int)(n >> 56)) & 0x00000002);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3);
-}
-
-static __inline unsigned int
-get_RRROpcodeExtension_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x3);
-}
-
-static __inline unsigned int
-get_ShAmt_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_ShAmt_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_ShAmt_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_ShAmt_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_ShiftOpcodeExtension_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_ShiftOpcodeExtension_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x3ff);
-}
-
-static __inline unsigned int
-get_ShiftOpcodeExtension_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 18)) & 0x3);
-}
-
-static __inline unsigned int
-get_ShiftOpcodeExtension_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 49)) & 0x3);
-}
-
-static __inline unsigned int
-get_SrcA_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 6)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 6)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 37)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcA_Y2(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 20)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcBDest_Y2(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 51)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_SrcB_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_UnaryOpcodeExtension_X0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_UnaryOpcodeExtension_X1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-static __inline unsigned int
-get_UnaryOpcodeExtension_Y0(tilegx_bundle_bits num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((n >> 12)) & 0x3f);
-}
-
-static __inline unsigned int
-get_UnaryOpcodeExtension_Y1(tilegx_bundle_bits n)
-{
-  return (((unsigned int)(n >> 43)) & 0x3f);
-}
-
-
-static __inline int
-sign_extend(int n, int num_bits)
-{
-  int shift = (int)(sizeof(int) * 8 - num_bits);
-  return (n << shift) >> shift;
-}
-
-
-
-static __inline tilegx_bundle_bits
-create_BFEnd_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_BFOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xf) << 24);
-}
-
-static __inline tilegx_bundle_bits
-create_BFStart_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 18);
-}
-
-static __inline tilegx_bundle_bits
-create_BrOff_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
-         (((tilegx_bundle_bits)(n & 0x0001ffc0)) << 37);
-}
-
-static __inline tilegx_bundle_bits
-create_BrType_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x1f)) << 54);
-}
-
-static __inline tilegx_bundle_bits
-create_Dest_Imm8_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
-         (((tilegx_bundle_bits)(n & 0x000000c0)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_Dest_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 0);
-}
-
-static __inline tilegx_bundle_bits
-create_Dest_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
-}
-
-static __inline tilegx_bundle_bits
-create_Dest_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 0);
-}
-
-static __inline tilegx_bundle_bits
-create_Dest_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 31);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm16_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xffff) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm16_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0xffff)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8OpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 20);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8OpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0xff)) << 51);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xff) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_Imm8_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0xff)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_JumpOff_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x7ffffff)) << 31);
-}
-
-static __inline tilegx_bundle_bits
-create_JumpOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x1)) << 58);
-}
-
-static __inline tilegx_bundle_bits
-create_MF_Imm14_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3fff)) << 37);
-}
-
-static __inline tilegx_bundle_bits
-create_MT_Imm14_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) |
-         (((tilegx_bundle_bits)(n & 0x00003fc0)) << 37);
-}
-
-static __inline tilegx_bundle_bits
-create_Mode(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3)) << 62);
-}
-
-static __inline tilegx_bundle_bits
-create_Opcode_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x7) << 28);
-}
-
-static __inline tilegx_bundle_bits
-create_Opcode_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x7)) << 59);
-}
-
-static __inline tilegx_bundle_bits
-create_Opcode_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0xf) << 27);
-}
-
-static __inline tilegx_bundle_bits
-create_Opcode_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0xf)) << 58);
-}
-
-static __inline tilegx_bundle_bits
-create_Opcode_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x00000001) << 26) |
-         (((tilegx_bundle_bits)(n & 0x00000002)) << 56);
-}
-
-static __inline tilegx_bundle_bits
-create_RRROpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3ff) << 18);
-}
-
-static __inline tilegx_bundle_bits
-create_RRROpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
-}
-
-static __inline tilegx_bundle_bits
-create_RRROpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 18);
-}
-
-static __inline tilegx_bundle_bits
-create_RRROpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
-}
-
-static __inline tilegx_bundle_bits
-create_ShAmt_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_ShAmt_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_ShAmt_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_ShAmt_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_ShiftOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3ff) << 18);
-}
-
-static __inline tilegx_bundle_bits
-create_ShiftOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3ff)) << 49);
-}
-
-static __inline tilegx_bundle_bits
-create_ShiftOpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3) << 18);
-}
-
-static __inline tilegx_bundle_bits
-create_ShiftOpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3)) << 49);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcA_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 6);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcA_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcA_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 6);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcA_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 37);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcA_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 20);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcBDest_Y2(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 51);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcB_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcB_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcB_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_SrcB_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_UnaryOpcodeExtension_X0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_UnaryOpcodeExtension_X1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-static __inline tilegx_bundle_bits
-create_UnaryOpcodeExtension_Y0(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return ((n & 0x3f) << 12);
-}
-
-static __inline tilegx_bundle_bits
-create_UnaryOpcodeExtension_Y1(int num)
-{
-  const unsigned int n = (unsigned int)num;
-  return (((tilegx_bundle_bits)(n & 0x3f)) << 43);
-}
-
-
-typedef enum
-{
-  TILEGX_PIPELINE_X0,
-  TILEGX_PIPELINE_X1,
-  TILEGX_PIPELINE_Y0,
-  TILEGX_PIPELINE_Y1,
-  TILEGX_PIPELINE_Y2,
-} tilegx_pipeline;
-
-#define tilegx_is_x_pipeline(p) ((int)(p) <= (int)TILEGX_PIPELINE_X1)
-
-typedef enum
-{
-  TILEGX_OP_TYPE_REGISTER,
-  TILEGX_OP_TYPE_IMMEDIATE,
-  TILEGX_OP_TYPE_ADDRESS,
-  TILEGX_OP_TYPE_SPR
-} tilegx_operand_type;
-
-/* These are the bits that determine if a bundle is in the X encoding. */
-#define TILEGX_BUNDLE_MODE_MASK ((tilegx_bundle_bits)3 << 62)
-
-enum
-{
-  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
-  TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
-
-  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
-  TILEGX_NUM_PIPELINE_ENCODINGS = 5,
-
-  /* Log base 2 of TILEGX_BUNDLE_SIZE_IN_BYTES. */
-  TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
-
-  /* Instructions take this many bytes. */
-  TILEGX_BUNDLE_SIZE_IN_BYTES = 1 << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES,
-
-  /* Log base 2 of TILEGX_BUNDLE_ALIGNMENT_IN_BYTES. */
-  TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
-
-  /* Bundles should be aligned modulo this number of bytes. */
-  TILEGX_BUNDLE_ALIGNMENT_IN_BYTES =
-    (1 << TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
-
-  /* Number of registers (some are magic, such as network I/O). */
-  TILEGX_NUM_REGISTERS = 64,
-};
-
-
-struct tilegx_operand
-{
-  /* Is this operand a register, immediate or address? */
-  tilegx_operand_type type;
-
-  /* The default relocation type for this operand.  */
-  signed int default_reloc : 16;
-
-  /* How many bits is this value? (used for range checking) */
-  unsigned int num_bits : 5;
-
-  /* Is the value signed? (used for range checking) */
-  unsigned int is_signed : 1;
-
-  /* Is this operand a source register? */
-  unsigned int is_src_reg : 1;
-
-  /* Is this operand written? (i.e. is it a destination register) */
-  unsigned int is_dest_reg : 1;
-
-  /* Is this operand PC-relative? */
-  unsigned int is_pc_relative : 1;
-
-  /* By how many bits do we right shift the value before inserting? */
-  unsigned int rightshift : 2;
-
-  /* Return the bits for this operand to be ORed into an existing bundle. */
-  tilegx_bundle_bits (*insert) (int op);
-
-  /* Extract this operand and return it. */
-  unsigned int (*extract) (tilegx_bundle_bits bundle);
-};
-
-
-extern const struct tilegx_operand tilegx_operands[];
-
-/* One finite-state machine per pipe for rapid instruction decoding. */
-extern const unsigned short * const
-tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS];
-
-
-struct tilegx_opcode
-{
-  /* The opcode mnemonic, e.g. "add" */
-  const char *name;
-
-  /* The enum value for this mnemonic. */
-  tilegx_mnemonic mnemonic;
-
-  /* A bit mask of which of the five pipes this instruction
-     is compatible with:
-     X0  0x01
-     X1  0x02
-     Y0  0x04
-     Y1  0x08
-     Y2  0x10 */
-  unsigned char pipes;
-
-  /* How many operands are there? */
-  unsigned char num_operands;
-
-  /* Which register does this write implicitly, or TREG_ZERO if none? */
-  unsigned char implicitly_written_register;
-
-  /* Can this be bundled with other instructions (almost always true). */
-  unsigned char can_bundle;
-
-  /* The description of the operands. Each of these is an
-   * index into the tilegx_operands[] table. */
-  unsigned char operands[TILEGX_NUM_PIPELINE_ENCODINGS][TILEGX_MAX_OPERANDS];
-
-};
-
-extern const struct tilegx_opcode tilegx_opcodes[];
-
-/* Used for non-textual disassembly into structs. */
-struct tilegx_decoded_instruction
-{
-  const struct tilegx_opcode *opcode;
-  const struct tilegx_operand *operands[TILEGX_MAX_OPERANDS];
-  long long operand_values[TILEGX_MAX_OPERANDS];
-};
-
-
-/* Disassemble a bundle into a struct for machine processing. */
-extern int parse_insn_tilegx(tilegx_bundle_bits bits,
-                             unsigned long long pc,
-                             struct tilegx_decoded_instruction
-                             decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]);
-
-
-
-#endif /* opcode_tilegx_h */
diff --git a/arch/tile/include/asm/opcode_constants_32.h b/arch/tile/include/asm/opcode_constants_32.h
deleted file mode 100644
index 227d033..0000000
--- a/arch/tile/include/asm/opcode_constants_32.h
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-/* This file is machine-generated; DO NOT EDIT! */
-
-
-#ifndef _TILE_OPCODE_CONSTANTS_H
-#define _TILE_OPCODE_CONSTANTS_H
-enum
-{
-  ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
-  ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
-  ADDB_SPECIAL_0_OPCODE_X0 = 1,
-  ADDB_SPECIAL_0_OPCODE_X1 = 1,
-  ADDHS_SPECIAL_0_OPCODE_X0 = 99,
-  ADDHS_SPECIAL_0_OPCODE_X1 = 69,
-  ADDH_SPECIAL_0_OPCODE_X0 = 2,
-  ADDH_SPECIAL_0_OPCODE_X1 = 2,
-  ADDIB_IMM_0_OPCODE_X0 = 1,
-  ADDIB_IMM_0_OPCODE_X1 = 1,
-  ADDIH_IMM_0_OPCODE_X0 = 2,
-  ADDIH_IMM_0_OPCODE_X1 = 2,
-  ADDI_IMM_0_OPCODE_X0 = 3,
-  ADDI_IMM_0_OPCODE_X1 = 3,
-  ADDI_IMM_1_OPCODE_SN = 1,
-  ADDI_OPCODE_Y0 = 9,
-  ADDI_OPCODE_Y1 = 7,
-  ADDLIS_OPCODE_X0 = 1,
-  ADDLIS_OPCODE_X1 = 2,
-  ADDLI_OPCODE_X0 = 2,
-  ADDLI_OPCODE_X1 = 3,
-  ADDS_SPECIAL_0_OPCODE_X0 = 96,
-  ADDS_SPECIAL_0_OPCODE_X1 = 66,
-  ADD_SPECIAL_0_OPCODE_X0 = 3,
-  ADD_SPECIAL_0_OPCODE_X1 = 3,
-  ADD_SPECIAL_0_OPCODE_Y0 = 0,
-  ADD_SPECIAL_0_OPCODE_Y1 = 0,
-  ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
-  ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
-  ANDI_IMM_0_OPCODE_X0 = 1,
-  ANDI_IMM_0_OPCODE_X1 = 4,
-  ANDI_OPCODE_Y0 = 10,
-  ANDI_OPCODE_Y1 = 8,
-  AND_SPECIAL_0_OPCODE_X0 = 6,
-  AND_SPECIAL_0_OPCODE_X1 = 4,
-  AND_SPECIAL_2_OPCODE_Y0 = 0,
-  AND_SPECIAL_2_OPCODE_Y1 = 0,
-  AULI_OPCODE_X0 = 3,
-  AULI_OPCODE_X1 = 4,
-  AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
-  AVGH_SPECIAL_0_OPCODE_X0 = 8,
-  BBNST_BRANCH_OPCODE_X1 = 15,
-  BBNS_BRANCH_OPCODE_X1 = 14,
-  BBNS_OPCODE_SN = 63,
-  BBST_BRANCH_OPCODE_X1 = 13,
-  BBS_BRANCH_OPCODE_X1 = 12,
-  BBS_OPCODE_SN = 62,
-  BGEZT_BRANCH_OPCODE_X1 = 7,
-  BGEZ_BRANCH_OPCODE_X1 = 6,
-  BGEZ_OPCODE_SN = 61,
-  BGZT_BRANCH_OPCODE_X1 = 5,
-  BGZ_BRANCH_OPCODE_X1 = 4,
-  BGZ_OPCODE_SN = 58,
-  BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
-  BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
-  BLEZT_BRANCH_OPCODE_X1 = 11,
-  BLEZ_BRANCH_OPCODE_X1 = 10,
-  BLEZ_OPCODE_SN = 59,
-  BLZT_BRANCH_OPCODE_X1 = 9,
-  BLZ_BRANCH_OPCODE_X1 = 8,
-  BLZ_OPCODE_SN = 60,
-  BNZT_BRANCH_OPCODE_X1 = 3,
-  BNZ_BRANCH_OPCODE_X1 = 2,
-  BNZ_OPCODE_SN = 57,
-  BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
-  BRANCH_OPCODE_X1 = 5,
-  BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
-  BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
-  BZT_BRANCH_OPCODE_X1 = 1,
-  BZ_BRANCH_OPCODE_X1 = 0,
-  BZ_OPCODE_SN = 56,
-  CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
-  CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
-  CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
-  CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
-  CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
-  CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
-  DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
-  DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
-  DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
-  FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
-  FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
-  FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
-  FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
-  FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
-  FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
-  FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
-  HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
-  ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
-  ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
-  ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
-  IMM_0_OPCODE_SN = 0,
-  IMM_0_OPCODE_X0 = 4,
-  IMM_0_OPCODE_X1 = 6,
-  IMM_1_OPCODE_SN = 1,
-  IMM_OPCODE_0_X0 = 5,
-  INTHB_SPECIAL_0_OPCODE_X0 = 11,
-  INTHB_SPECIAL_0_OPCODE_X1 = 5,
-  INTHH_SPECIAL_0_OPCODE_X0 = 12,
-  INTHH_SPECIAL_0_OPCODE_X1 = 6,
-  INTLB_SPECIAL_0_OPCODE_X0 = 13,
-  INTLB_SPECIAL_0_OPCODE_X1 = 7,
-  INTLH_SPECIAL_0_OPCODE_X0 = 14,
-  INTLH_SPECIAL_0_OPCODE_X1 = 8,
-  INV_UN_0_SHUN_0_OPCODE_X1 = 8,
-  IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
-  JALB_OPCODE_X1 = 13,
-  JALF_OPCODE_X1 = 12,
-  JALRP_SPECIAL_0_OPCODE_X1 = 9,
-  JALRR_IMM_1_OPCODE_SN = 3,
-  JALR_RR_IMM_0_OPCODE_SN = 5,
-  JALR_SPECIAL_0_OPCODE_X1 = 10,
-  JB_OPCODE_X1 = 11,
-  JF_OPCODE_X1 = 10,
-  JRP_SPECIAL_0_OPCODE_X1 = 11,
-  JRR_IMM_1_OPCODE_SN = 2,
-  JR_RR_IMM_0_OPCODE_SN = 4,
-  JR_SPECIAL_0_OPCODE_X1 = 12,
-  LBADD_IMM_0_OPCODE_X1 = 22,
-  LBADD_U_IMM_0_OPCODE_X1 = 23,
-  LB_OPCODE_Y2 = 0,
-  LB_UN_0_SHUN_0_OPCODE_X1 = 10,
-  LB_U_OPCODE_Y2 = 1,
-  LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
-  LHADD_IMM_0_OPCODE_X1 = 24,
-  LHADD_U_IMM_0_OPCODE_X1 = 25,
-  LH_OPCODE_Y2 = 2,
-  LH_UN_0_SHUN_0_OPCODE_X1 = 12,
-  LH_U_OPCODE_Y2 = 3,
-  LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
-  LNK_SPECIAL_0_OPCODE_X1 = 13,
-  LWADD_IMM_0_OPCODE_X1 = 26,
-  LWADD_NA_IMM_0_OPCODE_X1 = 27,
-  LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
-  LW_OPCODE_Y2 = 4,
-  LW_UN_0_SHUN_0_OPCODE_X1 = 14,
-  MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
-  MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
-  MAXH_SPECIAL_0_OPCODE_X0 = 16,
-  MAXH_SPECIAL_0_OPCODE_X1 = 15,
-  MAXIB_U_IMM_0_OPCODE_X0 = 4,
-  MAXIB_U_IMM_0_OPCODE_X1 = 5,
-  MAXIH_IMM_0_OPCODE_X0 = 5,
-  MAXIH_IMM_0_OPCODE_X1 = 6,
-  MFSPR_IMM_0_OPCODE_X1 = 7,
-  MF_UN_0_SHUN_0_OPCODE_X1 = 15,
-  MINB_U_SPECIAL_0_OPCODE_X0 = 17,
-  MINB_U_SPECIAL_0_OPCODE_X1 = 16,
-  MINH_SPECIAL_0_OPCODE_X0 = 18,
-  MINH_SPECIAL_0_OPCODE_X1 = 17,
-  MINIB_U_IMM_0_OPCODE_X0 = 6,
-  MINIB_U_IMM_0_OPCODE_X1 = 8,
-  MINIH_IMM_0_OPCODE_X0 = 7,
-  MINIH_IMM_0_OPCODE_X1 = 9,
-  MM_OPCODE_X0 = 6,
-  MM_OPCODE_X1 = 7,
-  MNZB_SPECIAL_0_OPCODE_X0 = 19,
-  MNZB_SPECIAL_0_OPCODE_X1 = 18,
-  MNZH_SPECIAL_0_OPCODE_X0 = 20,
-  MNZH_SPECIAL_0_OPCODE_X1 = 19,
-  MNZ_SPECIAL_0_OPCODE_X0 = 21,
-  MNZ_SPECIAL_0_OPCODE_X1 = 20,
-  MNZ_SPECIAL_1_OPCODE_Y0 = 0,
-  MNZ_SPECIAL_1_OPCODE_Y1 = 1,
-  MOVEI_IMM_1_OPCODE_SN = 0,
-  MOVE_RR_IMM_0_OPCODE_SN = 8,
-  MTSPR_IMM_0_OPCODE_X1 = 10,
-  MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
-  MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
-  MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
-  MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
-  MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
-  MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
-  MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
-  MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
-  MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
-  MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
-  MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
-  MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
-  MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
-  MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
-  MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
-  MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
-  MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
-  MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
-  MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
-  MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
-  MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
-  MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
-  MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
-  MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
-  MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
-  MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
-  MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
-  MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
-  MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
-  MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
-  MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
-  MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
-  MVNZ_SPECIAL_0_OPCODE_X0 = 45,
-  MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
-  MVZ_SPECIAL_0_OPCODE_X0 = 46,
-  MVZ_SPECIAL_1_OPCODE_Y0 = 2,
-  MZB_SPECIAL_0_OPCODE_X0 = 47,
-  MZB_SPECIAL_0_OPCODE_X1 = 21,
-  MZH_SPECIAL_0_OPCODE_X0 = 48,
-  MZH_SPECIAL_0_OPCODE_X1 = 22,
-  MZ_SPECIAL_0_OPCODE_X0 = 49,
-  MZ_SPECIAL_0_OPCODE_X1 = 23,
-  MZ_SPECIAL_1_OPCODE_Y0 = 3,
-  MZ_SPECIAL_1_OPCODE_Y1 = 2,
-  NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
-  NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
-  NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
-  NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
-  NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
-  NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
-  NOREG_RR_IMM_0_OPCODE_SN = 0,
-  NOR_SPECIAL_0_OPCODE_X0 = 50,
-  NOR_SPECIAL_0_OPCODE_X1 = 24,
-  NOR_SPECIAL_2_OPCODE_Y0 = 1,
-  NOR_SPECIAL_2_OPCODE_Y1 = 1,
-  ORI_IMM_0_OPCODE_X0 = 8,
-  ORI_IMM_0_OPCODE_X1 = 11,
-  ORI_OPCODE_Y0 = 11,
-  ORI_OPCODE_Y1 = 9,
-  OR_SPECIAL_0_OPCODE_X0 = 51,
-  OR_SPECIAL_0_OPCODE_X1 = 25,
-  OR_SPECIAL_2_OPCODE_Y0 = 2,
-  OR_SPECIAL_2_OPCODE_Y1 = 2,
-  PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
-  PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
-  PACKHB_SPECIAL_0_OPCODE_X0 = 52,
-  PACKHB_SPECIAL_0_OPCODE_X1 = 26,
-  PACKHS_SPECIAL_0_OPCODE_X0 = 102,
-  PACKHS_SPECIAL_0_OPCODE_X1 = 72,
-  PACKLB_SPECIAL_0_OPCODE_X0 = 53,
-  PACKLB_SPECIAL_0_OPCODE_X1 = 27,
-  PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
-  PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
-  RLI_SHUN_0_OPCODE_X0 = 1,
-  RLI_SHUN_0_OPCODE_X1 = 1,
-  RLI_SHUN_0_OPCODE_Y0 = 1,
-  RLI_SHUN_0_OPCODE_Y1 = 1,
-  RL_SPECIAL_0_OPCODE_X0 = 54,
-  RL_SPECIAL_0_OPCODE_X1 = 28,
-  RL_SPECIAL_3_OPCODE_Y0 = 0,
-  RL_SPECIAL_3_OPCODE_Y1 = 0,
-  RR_IMM_0_OPCODE_SN = 0,
-  S1A_SPECIAL_0_OPCODE_X0 = 55,
-  S1A_SPECIAL_0_OPCODE_X1 = 29,
-  S1A_SPECIAL_0_OPCODE_Y0 = 1,
-  S1A_SPECIAL_0_OPCODE_Y1 = 1,
-  S2A_SPECIAL_0_OPCODE_X0 = 56,
-  S2A_SPECIAL_0_OPCODE_X1 = 30,
-  S2A_SPECIAL_0_OPCODE_Y0 = 2,
-  S2A_SPECIAL_0_OPCODE_Y1 = 2,
-  S3A_SPECIAL_0_OPCODE_X0 = 57,
-  S3A_SPECIAL_0_OPCODE_X1 = 31,
-  S3A_SPECIAL_5_OPCODE_Y0 = 1,
-  S3A_SPECIAL_5_OPCODE_Y1 = 1,
-  SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
-  SADAH_SPECIAL_0_OPCODE_X0 = 59,
-  SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
-  SADB_U_SPECIAL_0_OPCODE_X0 = 61,
-  SADH_SPECIAL_0_OPCODE_X0 = 62,
-  SADH_U_SPECIAL_0_OPCODE_X0 = 63,
-  SBADD_IMM_0_OPCODE_X1 = 28,
-  SB_OPCODE_Y2 = 5,
-  SB_SPECIAL_0_OPCODE_X1 = 32,
-  SEQB_SPECIAL_0_OPCODE_X0 = 64,
-  SEQB_SPECIAL_0_OPCODE_X1 = 33,
-  SEQH_SPECIAL_0_OPCODE_X0 = 65,
-  SEQH_SPECIAL_0_OPCODE_X1 = 34,
-  SEQIB_IMM_0_OPCODE_X0 = 9,
-  SEQIB_IMM_0_OPCODE_X1 = 12,
-  SEQIH_IMM_0_OPCODE_X0 = 10,
-  SEQIH_IMM_0_OPCODE_X1 = 13,
-  SEQI_IMM_0_OPCODE_X0 = 11,
-  SEQI_IMM_0_OPCODE_X1 = 14,
-  SEQI_OPCODE_Y0 = 12,
-  SEQI_OPCODE_Y1 = 10,
-  SEQ_SPECIAL_0_OPCODE_X0 = 66,
-  SEQ_SPECIAL_0_OPCODE_X1 = 35,
-  SEQ_SPECIAL_5_OPCODE_Y0 = 2,
-  SEQ_SPECIAL_5_OPCODE_Y1 = 2,
-  SHADD_IMM_0_OPCODE_X1 = 29,
-  SHL8II_IMM_0_OPCODE_SN = 3,
-  SHLB_SPECIAL_0_OPCODE_X0 = 67,
-  SHLB_SPECIAL_0_OPCODE_X1 = 36,
-  SHLH_SPECIAL_0_OPCODE_X0 = 68,
-  SHLH_SPECIAL_0_OPCODE_X1 = 37,
-  SHLIB_SHUN_0_OPCODE_X0 = 2,
-  SHLIB_SHUN_0_OPCODE_X1 = 2,
-  SHLIH_SHUN_0_OPCODE_X0 = 3,
-  SHLIH_SHUN_0_OPCODE_X1 = 3,
-  SHLI_SHUN_0_OPCODE_X0 = 4,
-  SHLI_SHUN_0_OPCODE_X1 = 4,
-  SHLI_SHUN_0_OPCODE_Y0 = 2,
-  SHLI_SHUN_0_OPCODE_Y1 = 2,
-  SHL_SPECIAL_0_OPCODE_X0 = 69,
-  SHL_SPECIAL_0_OPCODE_X1 = 38,
-  SHL_SPECIAL_3_OPCODE_Y0 = 1,
-  SHL_SPECIAL_3_OPCODE_Y1 = 1,
-  SHR1_RR_IMM_0_OPCODE_SN = 9,
-  SHRB_SPECIAL_0_OPCODE_X0 = 70,
-  SHRB_SPECIAL_0_OPCODE_X1 = 39,
-  SHRH_SPECIAL_0_OPCODE_X0 = 71,
-  SHRH_SPECIAL_0_OPCODE_X1 = 40,
-  SHRIB_SHUN_0_OPCODE_X0 = 5,
-  SHRIB_SHUN_0_OPCODE_X1 = 5,
-  SHRIH_SHUN_0_OPCODE_X0 = 6,
-  SHRIH_SHUN_0_OPCODE_X1 = 6,
-  SHRI_SHUN_0_OPCODE_X0 = 7,
-  SHRI_SHUN_0_OPCODE_X1 = 7,
-  SHRI_SHUN_0_OPCODE_Y0 = 3,
-  SHRI_SHUN_0_OPCODE_Y1 = 3,
-  SHR_SPECIAL_0_OPCODE_X0 = 72,
-  SHR_SPECIAL_0_OPCODE_X1 = 41,
-  SHR_SPECIAL_3_OPCODE_Y0 = 2,
-  SHR_SPECIAL_3_OPCODE_Y1 = 2,
-  SHUN_0_OPCODE_X0 = 7,
-  SHUN_0_OPCODE_X1 = 8,
-  SHUN_0_OPCODE_Y0 = 13,
-  SHUN_0_OPCODE_Y1 = 11,
-  SH_OPCODE_Y2 = 6,
-  SH_SPECIAL_0_OPCODE_X1 = 42,
-  SLTB_SPECIAL_0_OPCODE_X0 = 73,
-  SLTB_SPECIAL_0_OPCODE_X1 = 43,
-  SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
-  SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
-  SLTEB_SPECIAL_0_OPCODE_X0 = 75,
-  SLTEB_SPECIAL_0_OPCODE_X1 = 45,
-  SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
-  SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
-  SLTEH_SPECIAL_0_OPCODE_X0 = 77,
-  SLTEH_SPECIAL_0_OPCODE_X1 = 47,
-  SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
-  SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
-  SLTE_SPECIAL_0_OPCODE_X0 = 79,
-  SLTE_SPECIAL_0_OPCODE_X1 = 49,
-  SLTE_SPECIAL_4_OPCODE_Y0 = 0,
-  SLTE_SPECIAL_4_OPCODE_Y1 = 0,
-  SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
-  SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
-  SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
-  SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
-  SLTH_SPECIAL_0_OPCODE_X0 = 81,
-  SLTH_SPECIAL_0_OPCODE_X1 = 51,
-  SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
-  SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
-  SLTIB_IMM_0_OPCODE_X0 = 12,
-  SLTIB_IMM_0_OPCODE_X1 = 15,
-  SLTIB_U_IMM_0_OPCODE_X0 = 13,
-  SLTIB_U_IMM_0_OPCODE_X1 = 16,
-  SLTIH_IMM_0_OPCODE_X0 = 14,
-  SLTIH_IMM_0_OPCODE_X1 = 17,
-  SLTIH_U_IMM_0_OPCODE_X0 = 15,
-  SLTIH_U_IMM_0_OPCODE_X1 = 18,
-  SLTI_IMM_0_OPCODE_X0 = 16,
-  SLTI_IMM_0_OPCODE_X1 = 19,
-  SLTI_OPCODE_Y0 = 14,
-  SLTI_OPCODE_Y1 = 12,
-  SLTI_U_IMM_0_OPCODE_X0 = 17,
-  SLTI_U_IMM_0_OPCODE_X1 = 20,
-  SLTI_U_OPCODE_Y0 = 15,
-  SLTI_U_OPCODE_Y1 = 13,
-  SLT_SPECIAL_0_OPCODE_X0 = 83,
-  SLT_SPECIAL_0_OPCODE_X1 = 53,
-  SLT_SPECIAL_4_OPCODE_Y0 = 2,
-  SLT_SPECIAL_4_OPCODE_Y1 = 2,
-  SLT_U_SPECIAL_0_OPCODE_X0 = 84,
-  SLT_U_SPECIAL_0_OPCODE_X1 = 54,
-  SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
-  SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
-  SNEB_SPECIAL_0_OPCODE_X0 = 85,
-  SNEB_SPECIAL_0_OPCODE_X1 = 55,
-  SNEH_SPECIAL_0_OPCODE_X0 = 86,
-  SNEH_SPECIAL_0_OPCODE_X1 = 56,
-  SNE_SPECIAL_0_OPCODE_X0 = 87,
-  SNE_SPECIAL_0_OPCODE_X1 = 57,
-  SNE_SPECIAL_5_OPCODE_Y0 = 3,
-  SNE_SPECIAL_5_OPCODE_Y1 = 3,
-  SPECIAL_0_OPCODE_X0 = 0,
-  SPECIAL_0_OPCODE_X1 = 1,
-  SPECIAL_0_OPCODE_Y0 = 1,
-  SPECIAL_0_OPCODE_Y1 = 1,
-  SPECIAL_1_OPCODE_Y0 = 2,
-  SPECIAL_1_OPCODE_Y1 = 2,
-  SPECIAL_2_OPCODE_Y0 = 3,
-  SPECIAL_2_OPCODE_Y1 = 3,
-  SPECIAL_3_OPCODE_Y0 = 4,
-  SPECIAL_3_OPCODE_Y1 = 4,
-  SPECIAL_4_OPCODE_Y0 = 5,
-  SPECIAL_4_OPCODE_Y1 = 5,
-  SPECIAL_5_OPCODE_Y0 = 6,
-  SPECIAL_5_OPCODE_Y1 = 6,
-  SPECIAL_6_OPCODE_Y0 = 7,
-  SPECIAL_7_OPCODE_Y0 = 8,
-  SRAB_SPECIAL_0_OPCODE_X0 = 88,
-  SRAB_SPECIAL_0_OPCODE_X1 = 58,
-  SRAH_SPECIAL_0_OPCODE_X0 = 89,
-  SRAH_SPECIAL_0_OPCODE_X1 = 59,
-  SRAIB_SHUN_0_OPCODE_X0 = 8,
-  SRAIB_SHUN_0_OPCODE_X1 = 8,
-  SRAIH_SHUN_0_OPCODE_X0 = 9,
-  SRAIH_SHUN_0_OPCODE_X1 = 9,
-  SRAI_SHUN_0_OPCODE_X0 = 10,
-  SRAI_SHUN_0_OPCODE_X1 = 10,
-  SRAI_SHUN_0_OPCODE_Y0 = 4,
-  SRAI_SHUN_0_OPCODE_Y1 = 4,
-  SRA_SPECIAL_0_OPCODE_X0 = 90,
-  SRA_SPECIAL_0_OPCODE_X1 = 60,
-  SRA_SPECIAL_3_OPCODE_Y0 = 3,
-  SRA_SPECIAL_3_OPCODE_Y1 = 3,
-  SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
-  SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
-  SUBB_SPECIAL_0_OPCODE_X0 = 91,
-  SUBB_SPECIAL_0_OPCODE_X1 = 61,
-  SUBHS_SPECIAL_0_OPCODE_X0 = 101,
-  SUBHS_SPECIAL_0_OPCODE_X1 = 71,
-  SUBH_SPECIAL_0_OPCODE_X0 = 92,
-  SUBH_SPECIAL_0_OPCODE_X1 = 62,
-  SUBS_SPECIAL_0_OPCODE_X0 = 97,
-  SUBS_SPECIAL_0_OPCODE_X1 = 67,
-  SUB_SPECIAL_0_OPCODE_X0 = 93,
-  SUB_SPECIAL_0_OPCODE_X1 = 63,
-  SUB_SPECIAL_0_OPCODE_Y0 = 3,
-  SUB_SPECIAL_0_OPCODE_Y1 = 3,
-  SWADD_IMM_0_OPCODE_X1 = 30,
-  SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
-  SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
-  SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
-  SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
-  SW_OPCODE_Y2 = 7,
-  SW_SPECIAL_0_OPCODE_X1 = 64,
-  TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
-  TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
-  TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
-  TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
-  TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
-  TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
-  TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
-  TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
-  TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
-  UN_0_SHUN_0_OPCODE_X0 = 11,
-  UN_0_SHUN_0_OPCODE_X1 = 11,
-  UN_0_SHUN_0_OPCODE_Y0 = 5,
-  UN_0_SHUN_0_OPCODE_Y1 = 5,
-  WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
-  XORI_IMM_0_OPCODE_X0 = 2,
-  XORI_IMM_0_OPCODE_X1 = 21,
-  XOR_SPECIAL_0_OPCODE_X0 = 94,
-  XOR_SPECIAL_0_OPCODE_X1 = 65,
-  XOR_SPECIAL_2_OPCODE_Y0 = 3,
-  XOR_SPECIAL_2_OPCODE_Y1 = 3
-};
-
-#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/opcode_constants_64.h b/arch/tile/include/asm/opcode_constants_64.h
deleted file mode 100644
index 7101928..0000000
--- a/arch/tile/include/asm/opcode_constants_64.h
+++ /dev/null
@@ -1,609 +0,0 @@
-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-/* This file is machine-generated; DO NOT EDIT! */
-
-
-#ifndef _TILE_OPCODE_CONSTANTS_H
-#define _TILE_OPCODE_CONSTANTS_H
-enum
-{
-  ADDI_IMM8_OPCODE_X0 = 1,
-  ADDI_IMM8_OPCODE_X1 = 1,
-  ADDI_OPCODE_Y0 = 0,
-  ADDI_OPCODE_Y1 = 1,
-  ADDLI_OPCODE_X0 = 1,
-  ADDLI_OPCODE_X1 = 0,
-  ADDXI_IMM8_OPCODE_X0 = 2,
-  ADDXI_IMM8_OPCODE_X1 = 2,
-  ADDXI_OPCODE_Y0 = 1,
-  ADDXI_OPCODE_Y1 = 2,
-  ADDXLI_OPCODE_X0 = 2,
-  ADDXLI_OPCODE_X1 = 1,
-  ADDXSC_RRR_0_OPCODE_X0 = 1,
-  ADDXSC_RRR_0_OPCODE_X1 = 1,
-  ADDX_RRR_0_OPCODE_X0 = 2,
-  ADDX_RRR_0_OPCODE_X1 = 2,
-  ADDX_RRR_0_OPCODE_Y0 = 0,
-  ADDX_SPECIAL_0_OPCODE_Y1 = 0,
-  ADD_RRR_0_OPCODE_X0 = 3,
-  ADD_RRR_0_OPCODE_X1 = 3,
-  ADD_RRR_0_OPCODE_Y0 = 1,
-  ADD_SPECIAL_0_OPCODE_Y1 = 1,
-  ANDI_IMM8_OPCODE_X0 = 3,
-  ANDI_IMM8_OPCODE_X1 = 3,
-  ANDI_OPCODE_Y0 = 2,
-  ANDI_OPCODE_Y1 = 3,
-  AND_RRR_0_OPCODE_X0 = 4,
-  AND_RRR_0_OPCODE_X1 = 4,
-  AND_RRR_5_OPCODE_Y0 = 0,
-  AND_RRR_5_OPCODE_Y1 = 0,
-  BEQZT_BRANCH_OPCODE_X1 = 16,
-  BEQZ_BRANCH_OPCODE_X1 = 17,
-  BFEXTS_BF_OPCODE_X0 = 4,
-  BFEXTU_BF_OPCODE_X0 = 5,
-  BFINS_BF_OPCODE_X0 = 6,
-  BF_OPCODE_X0 = 3,
-  BGEZT_BRANCH_OPCODE_X1 = 18,
-  BGEZ_BRANCH_OPCODE_X1 = 19,
-  BGTZT_BRANCH_OPCODE_X1 = 20,
-  BGTZ_BRANCH_OPCODE_X1 = 21,
-  BLBCT_BRANCH_OPCODE_X1 = 22,
-  BLBC_BRANCH_OPCODE_X1 = 23,
-  BLBST_BRANCH_OPCODE_X1 = 24,
-  BLBS_BRANCH_OPCODE_X1 = 25,
-  BLEZT_BRANCH_OPCODE_X1 = 26,
-  BLEZ_BRANCH_OPCODE_X1 = 27,
-  BLTZT_BRANCH_OPCODE_X1 = 28,
-  BLTZ_BRANCH_OPCODE_X1 = 29,
-  BNEZT_BRANCH_OPCODE_X1 = 30,
-  BNEZ_BRANCH_OPCODE_X1 = 31,
-  BRANCH_OPCODE_X1 = 2,
-  CMOVEQZ_RRR_0_OPCODE_X0 = 5,
-  CMOVEQZ_RRR_4_OPCODE_Y0 = 0,
-  CMOVNEZ_RRR_0_OPCODE_X0 = 6,
-  CMOVNEZ_RRR_4_OPCODE_Y0 = 1,
-  CMPEQI_IMM8_OPCODE_X0 = 4,
-  CMPEQI_IMM8_OPCODE_X1 = 4,
-  CMPEQI_OPCODE_Y0 = 3,
-  CMPEQI_OPCODE_Y1 = 4,
-  CMPEQ_RRR_0_OPCODE_X0 = 7,
-  CMPEQ_RRR_0_OPCODE_X1 = 5,
-  CMPEQ_RRR_3_OPCODE_Y0 = 0,
-  CMPEQ_RRR_3_OPCODE_Y1 = 2,
-  CMPEXCH4_RRR_0_OPCODE_X1 = 6,
-  CMPEXCH_RRR_0_OPCODE_X1 = 7,
-  CMPLES_RRR_0_OPCODE_X0 = 8,
-  CMPLES_RRR_0_OPCODE_X1 = 8,
-  CMPLES_RRR_2_OPCODE_Y0 = 0,
-  CMPLES_RRR_2_OPCODE_Y1 = 0,
-  CMPLEU_RRR_0_OPCODE_X0 = 9,
-  CMPLEU_RRR_0_OPCODE_X1 = 9,
-  CMPLEU_RRR_2_OPCODE_Y0 = 1,
-  CMPLEU_RRR_2_OPCODE_Y1 = 1,
-  CMPLTSI_IMM8_OPCODE_X0 = 5,
-  CMPLTSI_IMM8_OPCODE_X1 = 5,
-  CMPLTSI_OPCODE_Y0 = 4,
-  CMPLTSI_OPCODE_Y1 = 5,
-  CMPLTS_RRR_0_OPCODE_X0 = 10,
-  CMPLTS_RRR_0_OPCODE_X1 = 10,
-  CMPLTS_RRR_2_OPCODE_Y0 = 2,
-  CMPLTS_RRR_2_OPCODE_Y1 = 2,
-  CMPLTUI_IMM8_OPCODE_X0 = 6,
-  CMPLTUI_IMM8_OPCODE_X1 = 6,
-  CMPLTU_RRR_0_OPCODE_X0 = 11,
-  CMPLTU_RRR_0_OPCODE_X1 = 11,
-  CMPLTU_RRR_2_OPCODE_Y0 = 3,
-  CMPLTU_RRR_2_OPCODE_Y1 = 3,
-  CMPNE_RRR_0_OPCODE_X0 = 12,
-  CMPNE_RRR_0_OPCODE_X1 = 12,
-  CMPNE_RRR_3_OPCODE_Y0 = 1,
-  CMPNE_RRR_3_OPCODE_Y1 = 3,
-  CMULAF_RRR_0_OPCODE_X0 = 13,
-  CMULA_RRR_0_OPCODE_X0 = 14,
-  CMULFR_RRR_0_OPCODE_X0 = 15,
-  CMULF_RRR_0_OPCODE_X0 = 16,
-  CMULHR_RRR_0_OPCODE_X0 = 17,
-  CMULH_RRR_0_OPCODE_X0 = 18,
-  CMUL_RRR_0_OPCODE_X0 = 19,
-  CNTLZ_UNARY_OPCODE_X0 = 1,
-  CNTLZ_UNARY_OPCODE_Y0 = 1,
-  CNTTZ_UNARY_OPCODE_X0 = 2,
-  CNTTZ_UNARY_OPCODE_Y0 = 2,
-  CRC32_32_RRR_0_OPCODE_X0 = 20,
-  CRC32_8_RRR_0_OPCODE_X0 = 21,
-  DBLALIGN2_RRR_0_OPCODE_X0 = 22,
-  DBLALIGN2_RRR_0_OPCODE_X1 = 13,
-  DBLALIGN4_RRR_0_OPCODE_X0 = 23,
-  DBLALIGN4_RRR_0_OPCODE_X1 = 14,
-  DBLALIGN6_RRR_0_OPCODE_X0 = 24,
-  DBLALIGN6_RRR_0_OPCODE_X1 = 15,
-  DBLALIGN_RRR_0_OPCODE_X0 = 25,
-  DRAIN_UNARY_OPCODE_X1 = 1,
-  DTLBPR_UNARY_OPCODE_X1 = 2,
-  EXCH4_RRR_0_OPCODE_X1 = 16,
-  EXCH_RRR_0_OPCODE_X1 = 17,
-  FDOUBLE_ADDSUB_RRR_0_OPCODE_X0 = 26,
-  FDOUBLE_ADD_FLAGS_RRR_0_OPCODE_X0 = 27,
-  FDOUBLE_MUL_FLAGS_RRR_0_OPCODE_X0 = 28,
-  FDOUBLE_PACK1_RRR_0_OPCODE_X0 = 29,
-  FDOUBLE_PACK2_RRR_0_OPCODE_X0 = 30,
-  FDOUBLE_SUB_FLAGS_RRR_0_OPCODE_X0 = 31,
-  FDOUBLE_UNPACK_MAX_RRR_0_OPCODE_X0 = 32,
-  FDOUBLE_UNPACK_MIN_RRR_0_OPCODE_X0 = 33,
-  FETCHADD4_RRR_0_OPCODE_X1 = 18,
-  FETCHADDGEZ4_RRR_0_OPCODE_X1 = 19,
-  FETCHADDGEZ_RRR_0_OPCODE_X1 = 20,
-  FETCHADD_RRR_0_OPCODE_X1 = 21,
-  FETCHAND4_RRR_0_OPCODE_X1 = 22,
-  FETCHAND_RRR_0_OPCODE_X1 = 23,
-  FETCHOR4_RRR_0_OPCODE_X1 = 24,
-  FETCHOR_RRR_0_OPCODE_X1 = 25,
-  FINV_UNARY_OPCODE_X1 = 3,
-  FLUSHWB_UNARY_OPCODE_X1 = 4,
-  FLUSH_UNARY_OPCODE_X1 = 5,
-  FNOP_UNARY_OPCODE_X0 = 3,
-  FNOP_UNARY_OPCODE_X1 = 6,
-  FNOP_UNARY_OPCODE_Y0 = 3,
-  FNOP_UNARY_OPCODE_Y1 = 8,
-  FSINGLE_ADD1_RRR_0_OPCODE_X0 = 34,
-  FSINGLE_ADDSUB2_RRR_0_OPCODE_X0 = 35,
-  FSINGLE_MUL1_RRR_0_OPCODE_X0 = 36,
-  FSINGLE_MUL2_RRR_0_OPCODE_X0 = 37,
-  FSINGLE_PACK1_UNARY_OPCODE_X0 = 4,
-  FSINGLE_PACK1_UNARY_OPCODE_Y0 = 4,
-  FSINGLE_PACK2_RRR_0_OPCODE_X0 = 38,
-  FSINGLE_SUB1_RRR_0_OPCODE_X0 = 39,
-  ICOH_UNARY_OPCODE_X1 = 7,
-  ILL_UNARY_OPCODE_X1 = 8,
-  ILL_UNARY_OPCODE_Y1 = 9,
-  IMM8_OPCODE_X0 = 4,
-  IMM8_OPCODE_X1 = 3,
-  INV_UNARY_OPCODE_X1 = 9,
-  IRET_UNARY_OPCODE_X1 = 10,
-  JALRP_UNARY_OPCODE_X1 = 11,
-  JALRP_UNARY_OPCODE_Y1 = 10,
-  JALR_UNARY_OPCODE_X1 = 12,
-  JALR_UNARY_OPCODE_Y1 = 11,
-  JAL_JUMP_OPCODE_X1 = 0,
-  JRP_UNARY_OPCODE_X1 = 13,
-  JRP_UNARY_OPCODE_Y1 = 12,
-  JR_UNARY_OPCODE_X1 = 14,
-  JR_UNARY_OPCODE_Y1 = 13,
-  JUMP_OPCODE_X1 = 4,
-  J_JUMP_OPCODE_X1 = 1,
-  LD1S_ADD_IMM8_OPCODE_X1 = 7,
-  LD1S_OPCODE_Y2 = 0,
-  LD1S_UNARY_OPCODE_X1 = 15,
-  LD1U_ADD_IMM8_OPCODE_X1 = 8,
-  LD1U_OPCODE_Y2 = 1,
-  LD1U_UNARY_OPCODE_X1 = 16,
-  LD2S_ADD_IMM8_OPCODE_X1 = 9,
-  LD2S_OPCODE_Y2 = 2,
-  LD2S_UNARY_OPCODE_X1 = 17,
-  LD2U_ADD_IMM8_OPCODE_X1 = 10,
-  LD2U_OPCODE_Y2 = 3,
-  LD2U_UNARY_OPCODE_X1 = 18,
-  LD4S_ADD_IMM8_OPCODE_X1 = 11,
-  LD4S_OPCODE_Y2 = 1,
-  LD4S_UNARY_OPCODE_X1 = 19,
-  LD4U_ADD_IMM8_OPCODE_X1 = 12,
-  LD4U_OPCODE_Y2 = 2,
-  LD4U_UNARY_OPCODE_X1 = 20,
-  LDNA_UNARY_OPCODE_X1 = 21,
-  LDNT1S_ADD_IMM8_OPCODE_X1 = 13,
-  LDNT1S_UNARY_OPCODE_X1 = 22,
-  LDNT1U_ADD_IMM8_OPCODE_X1 = 14,
-  LDNT1U_UNARY_OPCODE_X1 = 23,
-  LDNT2S_ADD_IMM8_OPCODE_X1 = 15,
-  LDNT2S_UNARY_OPCODE_X1 = 24,
-  LDNT2U_ADD_IMM8_OPCODE_X1 = 16,
-  LDNT2U_UNARY_OPCODE_X1 = 25,
-  LDNT4S_ADD_IMM8_OPCODE_X1 = 17,
-  LDNT4S_UNARY_OPCODE_X1 = 26,
-  LDNT4U_ADD_IMM8_OPCODE_X1 = 18,
-  LDNT4U_UNARY_OPCODE_X1 = 27,
-  LDNT_ADD_IMM8_OPCODE_X1 = 19,
-  LDNT_UNARY_OPCODE_X1 = 28,
-  LD_ADD_IMM8_OPCODE_X1 = 20,
-  LD_OPCODE_Y2 = 3,
-  LD_UNARY_OPCODE_X1 = 29,
-  LNK_UNARY_OPCODE_X1 = 30,
-  LNK_UNARY_OPCODE_Y1 = 14,
-  LWNA_ADD_IMM8_OPCODE_X1 = 21,
-  MFSPR_IMM8_OPCODE_X1 = 22,
-  MF_UNARY_OPCODE_X1 = 31,
-  MM_BF_OPCODE_X0 = 7,
-  MNZ_RRR_0_OPCODE_X0 = 40,
-  MNZ_RRR_0_OPCODE_X1 = 26,
-  MNZ_RRR_4_OPCODE_Y0 = 2,
-  MNZ_RRR_4_OPCODE_Y1 = 2,
-  MODE_OPCODE_YA2 = 1,
-  MODE_OPCODE_YB2 = 2,
-  MODE_OPCODE_YC2 = 3,
-  MTSPR_IMM8_OPCODE_X1 = 23,
-  MULAX_RRR_0_OPCODE_X0 = 41,
-  MULAX_RRR_3_OPCODE_Y0 = 2,
-  MULA_HS_HS_RRR_0_OPCODE_X0 = 42,
-  MULA_HS_HS_RRR_9_OPCODE_Y0 = 0,
-  MULA_HS_HU_RRR_0_OPCODE_X0 = 43,
-  MULA_HS_LS_RRR_0_OPCODE_X0 = 44,
-  MULA_HS_LU_RRR_0_OPCODE_X0 = 45,
-  MULA_HU_HU_RRR_0_OPCODE_X0 = 46,
-  MULA_HU_HU_RRR_9_OPCODE_Y0 = 1,
-  MULA_HU_LS_RRR_0_OPCODE_X0 = 47,
-  MULA_HU_LU_RRR_0_OPCODE_X0 = 48,
-  MULA_LS_LS_RRR_0_OPCODE_X0 = 49,
-  MULA_LS_LS_RRR_9_OPCODE_Y0 = 2,
-  MULA_LS_LU_RRR_0_OPCODE_X0 = 50,
-  MULA_LU_LU_RRR_0_OPCODE_X0 = 51,
-  MULA_LU_LU_RRR_9_OPCODE_Y0 = 3,
-  MULX_RRR_0_OPCODE_X0 = 52,
-  MULX_RRR_3_OPCODE_Y0 = 3,
-  MUL_HS_HS_RRR_0_OPCODE_X0 = 53,
-  MUL_HS_HS_RRR_8_OPCODE_Y0 = 0,
-  MUL_HS_HU_RRR_0_OPCODE_X0 = 54,
-  MUL_HS_LS_RRR_0_OPCODE_X0 = 55,
-  MUL_HS_LU_RRR_0_OPCODE_X0 = 56,
-  MUL_HU_HU_RRR_0_OPCODE_X0 = 57,
-  MUL_HU_HU_RRR_8_OPCODE_Y0 = 1,
-  MUL_HU_LS_RRR_0_OPCODE_X0 = 58,
-  MUL_HU_LU_RRR_0_OPCODE_X0 = 59,
-  MUL_LS_LS_RRR_0_OPCODE_X0 = 60,
-  MUL_LS_LS_RRR_8_OPCODE_Y0 = 2,
-  MUL_LS_LU_RRR_0_OPCODE_X0 = 61,
-  MUL_LU_LU_RRR_0_OPCODE_X0 = 62,
-  MUL_LU_LU_RRR_8_OPCODE_Y0 = 3,
-  MZ_RRR_0_OPCODE_X0 = 63,
-  MZ_RRR_0_OPCODE_X1 = 27,
-  MZ_RRR_4_OPCODE_Y0 = 3,
-  MZ_RRR_4_OPCODE_Y1 = 3,
-  NAP_UNARY_OPCODE_X1 = 32,
-  NOP_UNARY_OPCODE_X0 = 5,
-  NOP_UNARY_OPCODE_X1 = 33,
-  NOP_UNARY_OPCODE_Y0 = 5,
-  NOP_UNARY_OPCODE_Y1 = 15,
-  NOR_RRR_0_OPCODE_X0 = 64,
-  NOR_RRR_0_OPCODE_X1 = 28,
-  NOR_RRR_5_OPCODE_Y0 = 1,
-  NOR_RRR_5_OPCODE_Y1 = 1,
-  ORI_IMM8_OPCODE_X0 = 7,
-  ORI_IMM8_OPCODE_X1 = 24,
-  OR_RRR_0_OPCODE_X0 = 65,
-  OR_RRR_0_OPCODE_X1 = 29,
-  OR_RRR_5_OPCODE_Y0 = 2,
-  OR_RRR_5_OPCODE_Y1 = 2,
-  PCNT_UNARY_OPCODE_X0 = 6,
-  PCNT_UNARY_OPCODE_Y0 = 6,
-  REVBITS_UNARY_OPCODE_X0 = 7,
-  REVBITS_UNARY_OPCODE_Y0 = 7,
-  REVBYTES_UNARY_OPCODE_X0 = 8,
-  REVBYTES_UNARY_OPCODE_Y0 = 8,
-  ROTLI_SHIFT_OPCODE_X0 = 1,
-  ROTLI_SHIFT_OPCODE_X1 = 1,
-  ROTLI_SHIFT_OPCODE_Y0 = 0,
-  ROTLI_SHIFT_OPCODE_Y1 = 0,
-  ROTL_RRR_0_OPCODE_X0 = 66,
-  ROTL_RRR_0_OPCODE_X1 = 30,
-  ROTL_RRR_6_OPCODE_Y0 = 0,
-  ROTL_RRR_6_OPCODE_Y1 = 0,
-  RRR_0_OPCODE_X0 = 5,
-  RRR_0_OPCODE_X1 = 5,
-  RRR_0_OPCODE_Y0 = 5,
-  RRR_0_OPCODE_Y1 = 6,
-  RRR_1_OPCODE_Y0 = 6,
-  RRR_1_OPCODE_Y1 = 7,
-  RRR_2_OPCODE_Y0 = 7,
-  RRR_2_OPCODE_Y1 = 8,
-  RRR_3_OPCODE_Y0 = 8,
-  RRR_3_OPCODE_Y1 = 9,
-  RRR_4_OPCODE_Y0 = 9,
-  RRR_4_OPCODE_Y1 = 10,
-  RRR_5_OPCODE_Y0 = 10,
-  RRR_5_OPCODE_Y1 = 11,
-  RRR_6_OPCODE_Y0 = 11,
-  RRR_6_OPCODE_Y1 = 12,
-  RRR_7_OPCODE_Y0 = 12,
-  RRR_7_OPCODE_Y1 = 13,
-  RRR_8_OPCODE_Y0 = 13,
-  RRR_9_OPCODE_Y0 = 14,
-  SHIFT_OPCODE_X0 = 6,
-  SHIFT_OPCODE_X1 = 6,
-  SHIFT_OPCODE_Y0 = 15,
-  SHIFT_OPCODE_Y1 = 14,
-  SHL16INSLI_OPCODE_X0 = 7,
-  SHL16INSLI_OPCODE_X1 = 7,
-  SHL1ADDX_RRR_0_OPCODE_X0 = 67,
-  SHL1ADDX_RRR_0_OPCODE_X1 = 31,
-  SHL1ADDX_RRR_7_OPCODE_Y0 = 1,
-  SHL1ADDX_RRR_7_OPCODE_Y1 = 1,
-  SHL1ADD_RRR_0_OPCODE_X0 = 68,
-  SHL1ADD_RRR_0_OPCODE_X1 = 32,
-  SHL1ADD_RRR_1_OPCODE_Y0 = 0,
-  SHL1ADD_RRR_1_OPCODE_Y1 = 0,
-  SHL2ADDX_RRR_0_OPCODE_X0 = 69,
-  SHL2ADDX_RRR_0_OPCODE_X1 = 33,
-  SHL2ADDX_RRR_7_OPCODE_Y0 = 2,
-  SHL2ADDX_RRR_7_OPCODE_Y1 = 2,
-  SHL2ADD_RRR_0_OPCODE_X0 = 70,
-  SHL2ADD_RRR_0_OPCODE_X1 = 34,
-  SHL2ADD_RRR_1_OPCODE_Y0 = 1,
-  SHL2ADD_RRR_1_OPCODE_Y1 = 1,
-  SHL3ADDX_RRR_0_OPCODE_X0 = 71,
-  SHL3ADDX_RRR_0_OPCODE_X1 = 35,
-  SHL3ADDX_RRR_7_OPCODE_Y0 = 3,
-  SHL3ADDX_RRR_7_OPCODE_Y1 = 3,
-  SHL3ADD_RRR_0_OPCODE_X0 = 72,
-  SHL3ADD_RRR_0_OPCODE_X1 = 36,
-  SHL3ADD_RRR_1_OPCODE_Y0 = 2,
-  SHL3ADD_RRR_1_OPCODE_Y1 = 2,
-  SHLI_SHIFT_OPCODE_X0 = 2,
-  SHLI_SHIFT_OPCODE_X1 = 2,
-  SHLI_SHIFT_OPCODE_Y0 = 1,
-  SHLI_SHIFT_OPCODE_Y1 = 1,
-  SHLXI_SHIFT_OPCODE_X0 = 3,
-  SHLXI_SHIFT_OPCODE_X1 = 3,
-  SHLX_RRR_0_OPCODE_X0 = 73,
-  SHLX_RRR_0_OPCODE_X1 = 37,
-  SHL_RRR_0_OPCODE_X0 = 74,
-  SHL_RRR_0_OPCODE_X1 = 38,
-  SHL_RRR_6_OPCODE_Y0 = 1,
-  SHL_RRR_6_OPCODE_Y1 = 1,
-  SHRSI_SHIFT_OPCODE_X0 = 4,
-  SHRSI_SHIFT_OPCODE_X1 = 4,
-  SHRSI_SHIFT_OPCODE_Y0 = 2,
-  SHRSI_SHIFT_OPCODE_Y1 = 2,
-  SHRS_RRR_0_OPCODE_X0 = 75,
-  SHRS_RRR_0_OPCODE_X1 = 39,
-  SHRS_RRR_6_OPCODE_Y0 = 2,
-  SHRS_RRR_6_OPCODE_Y1 = 2,
-  SHRUI_SHIFT_OPCODE_X0 = 5,
-  SHRUI_SHIFT_OPCODE_X1 = 5,
-  SHRUI_SHIFT_OPCODE_Y0 = 3,
-  SHRUI_SHIFT_OPCODE_Y1 = 3,
-  SHRUXI_SHIFT_OPCODE_X0 = 6,
-  SHRUXI_SHIFT_OPCODE_X1 = 6,
-  SHRUX_RRR_0_OPCODE_X0 = 76,
-  SHRUX_RRR_0_OPCODE_X1 = 40,
-  SHRU_RRR_0_OPCODE_X0 = 77,
-  SHRU_RRR_0_OPCODE_X1 = 41,
-  SHRU_RRR_6_OPCODE_Y0 = 3,
-  SHRU_RRR_6_OPCODE_Y1 = 3,
-  SHUFFLEBYTES_RRR_0_OPCODE_X0 = 78,
-  ST1_ADD_IMM8_OPCODE_X1 = 25,
-  ST1_OPCODE_Y2 = 0,
-  ST1_RRR_0_OPCODE_X1 = 42,
-  ST2_ADD_IMM8_OPCODE_X1 = 26,
-  ST2_OPCODE_Y2 = 1,
-  ST2_RRR_0_OPCODE_X1 = 43,
-  ST4_ADD_IMM8_OPCODE_X1 = 27,
-  ST4_OPCODE_Y2 = 2,
-  ST4_RRR_0_OPCODE_X1 = 44,
-  STNT1_ADD_IMM8_OPCODE_X1 = 28,
-  STNT1_RRR_0_OPCODE_X1 = 45,
-  STNT2_ADD_IMM8_OPCODE_X1 = 29,
-  STNT2_RRR_0_OPCODE_X1 = 46,
-  STNT4_ADD_IMM8_OPCODE_X1 = 30,
-  STNT4_RRR_0_OPCODE_X1 = 47,
-  STNT_ADD_IMM8_OPCODE_X1 = 31,
-  STNT_RRR_0_OPCODE_X1 = 48,
-  ST_ADD_IMM8_OPCODE_X1 = 32,
-  ST_OPCODE_Y2 = 3,
-  ST_RRR_0_OPCODE_X1 = 49,
-  SUBXSC_RRR_0_OPCODE_X0 = 79,
-  SUBXSC_RRR_0_OPCODE_X1 = 50,
-  SUBX_RRR_0_OPCODE_X0 = 80,
-  SUBX_RRR_0_OPCODE_X1 = 51,
-  SUBX_RRR_0_OPCODE_Y0 = 2,
-  SUBX_RRR_0_OPCODE_Y1 = 2,
-  SUB_RRR_0_OPCODE_X0 = 81,
-  SUB_RRR_0_OPCODE_X1 = 52,
-  SUB_RRR_0_OPCODE_Y0 = 3,
-  SUB_RRR_0_OPCODE_Y1 = 3,
-  SWINT0_UNARY_OPCODE_X1 = 34,
-  SWINT1_UNARY_OPCODE_X1 = 35,
-  SWINT2_UNARY_OPCODE_X1 = 36,
-  SWINT3_UNARY_OPCODE_X1 = 37,
-  TBLIDXB0_UNARY_OPCODE_X0 = 9,
-  TBLIDXB0_UNARY_OPCODE_Y0 = 9,
-  TBLIDXB1_UNARY_OPCODE_X0 = 10,
-  TBLIDXB1_UNARY_OPCODE_Y0 = 10,
-  TBLIDXB2_UNARY_OPCODE_X0 = 11,
-  TBLIDXB2_UNARY_OPCODE_Y0 = 11,
-  TBLIDXB3_UNARY_OPCODE_X0 = 12,
-  TBLIDXB3_UNARY_OPCODE_Y0 = 12,
-  UNARY_RRR_0_OPCODE_X0 = 82,
-  UNARY_RRR_0_OPCODE_X1 = 53,
-  UNARY_RRR_1_OPCODE_Y0 = 3,
-  UNARY_RRR_1_OPCODE_Y1 = 3,
-  V1ADDI_IMM8_OPCODE_X0 = 8,
-  V1ADDI_IMM8_OPCODE_X1 = 33,
-  V1ADDUC_RRR_0_OPCODE_X0 = 83,
-  V1ADDUC_RRR_0_OPCODE_X1 = 54,
-  V1ADD_RRR_0_OPCODE_X0 = 84,
-  V1ADD_RRR_0_OPCODE_X1 = 55,
-  V1ADIFFU_RRR_0_OPCODE_X0 = 85,
-  V1AVGU_RRR_0_OPCODE_X0 = 86,
-  V1CMPEQI_IMM8_OPCODE_X0 = 9,
-  V1CMPEQI_IMM8_OPCODE_X1 = 34,
-  V1CMPEQ_RRR_0_OPCODE_X0 = 87,
-  V1CMPEQ_RRR_0_OPCODE_X1 = 56,
-  V1CMPLES_RRR_0_OPCODE_X0 = 88,
-  V1CMPLES_RRR_0_OPCODE_X1 = 57,
-  V1CMPLEU_RRR_0_OPCODE_X0 = 89,
-  V1CMPLEU_RRR_0_OPCODE_X1 = 58,
-  V1CMPLTSI_IMM8_OPCODE_X0 = 10,
-  V1CMPLTSI_IMM8_OPCODE_X1 = 35,
-  V1CMPLTS_RRR_0_OPCODE_X0 = 90,
-  V1CMPLTS_RRR_0_OPCODE_X1 = 59,
-  V1CMPLTUI_IMM8_OPCODE_X0 = 11,
-  V1CMPLTUI_IMM8_OPCODE_X1 = 36,
-  V1CMPLTU_RRR_0_OPCODE_X0 = 91,
-  V1CMPLTU_RRR_0_OPCODE_X1 = 60,
-  V1CMPNE_RRR_0_OPCODE_X0 = 92,
-  V1CMPNE_RRR_0_OPCODE_X1 = 61,
-  V1DDOTPUA_RRR_0_OPCODE_X0 = 161,
-  V1DDOTPUSA_RRR_0_OPCODE_X0 = 93,
-  V1DDOTPUS_RRR_0_OPCODE_X0 = 94,
-  V1DDOTPU_RRR_0_OPCODE_X0 = 162,
-  V1DOTPA_RRR_0_OPCODE_X0 = 95,
-  V1DOTPUA_RRR_0_OPCODE_X0 = 163,
-  V1DOTPUSA_RRR_0_OPCODE_X0 = 96,
-  V1DOTPUS_RRR_0_OPCODE_X0 = 97,
-  V1DOTPU_RRR_0_OPCODE_X0 = 164,
-  V1DOTP_RRR_0_OPCODE_X0 = 98,
-  V1INT_H_RRR_0_OPCODE_X0 = 99,
-  V1INT_H_RRR_0_OPCODE_X1 = 62,
-  V1INT_L_RRR_0_OPCODE_X0 = 100,
-  V1INT_L_RRR_0_OPCODE_X1 = 63,
-  V1MAXUI_IMM8_OPCODE_X0 = 12,
-  V1MAXUI_IMM8_OPCODE_X1 = 37,
-  V1MAXU_RRR_0_OPCODE_X0 = 101,
-  V1MAXU_RRR_0_OPCODE_X1 = 64,
-  V1MINUI_IMM8_OPCODE_X0 = 13,
-  V1MINUI_IMM8_OPCODE_X1 = 38,
-  V1MINU_RRR_0_OPCODE_X0 = 102,
-  V1MINU_RRR_0_OPCODE_X1 = 65,
-  V1MNZ_RRR_0_OPCODE_X0 = 103,
-  V1MNZ_RRR_0_OPCODE_X1 = 66,
-  V1MULTU_RRR_0_OPCODE_X0 = 104,
-  V1MULUS_RRR_0_OPCODE_X0 = 105,
-  V1MULU_RRR_0_OPCODE_X0 = 106,
-  V1MZ_RRR_0_OPCODE_X0 = 107,
-  V1MZ_RRR_0_OPCODE_X1 = 67,
-  V1SADAU_RRR_0_OPCODE_X0 = 108,
-  V1SADU_RRR_0_OPCODE_X0 = 109,
-  V1SHLI_SHIFT_OPCODE_X0 = 7,
-  V1SHLI_SHIFT_OPCODE_X1 = 7,
-  V1SHL_RRR_0_OPCODE_X0 = 110,
-  V1SHL_RRR_0_OPCODE_X1 = 68,
-  V1SHRSI_SHIFT_OPCODE_X0 = 8,
-  V1SHRSI_SHIFT_OPCODE_X1 = 8,
-  V1SHRS_RRR_0_OPCODE_X0 = 111,
-  V1SHRS_RRR_0_OPCODE_X1 = 69,
-  V1SHRUI_SHIFT_OPCODE_X0 = 9,
-  V1SHRUI_SHIFT_OPCODE_X1 = 9,
-  V1SHRU_RRR_0_OPCODE_X0 = 112,
-  V1SHRU_RRR_0_OPCODE_X1 = 70,
-  V1SUBUC_RRR_0_OPCODE_X0 = 113,
-  V1SUBUC_RRR_0_OPCODE_X1 = 71,
-  V1SUB_RRR_0_OPCODE_X0 = 114,
-  V1SUB_RRR_0_OPCODE_X1 = 72,
-  V2ADDI_IMM8_OPCODE_X0 = 14,
-  V2ADDI_IMM8_OPCODE_X1 = 39,
-  V2ADDSC_RRR_0_OPCODE_X0 = 115,
-  V2ADDSC_RRR_0_OPCODE_X1 = 73,
-  V2ADD_RRR_0_OPCODE_X0 = 116,
-  V2ADD_RRR_0_OPCODE_X1 = 74,
-  V2ADIFFS_RRR_0_OPCODE_X0 = 117,
-  V2AVGS_RRR_0_OPCODE_X0 = 118,
-  V2CMPEQI_IMM8_OPCODE_X0 = 15,
-  V2CMPEQI_IMM8_OPCODE_X1 = 40,
-  V2CMPEQ_RRR_0_OPCODE_X0 = 119,
-  V2CMPEQ_RRR_0_OPCODE_X1 = 75,
-  V2CMPLES_RRR_0_OPCODE_X0 = 120,
-  V2CMPLES_RRR_0_OPCODE_X1 = 76,
-  V2CMPLEU_RRR_0_OPCODE_X0 = 121,
-  V2CMPLEU_RRR_0_OPCODE_X1 = 77,
-  V2CMPLTSI_IMM8_OPCODE_X0 = 16,
-  V2CMPLTSI_IMM8_OPCODE_X1 = 41,
-  V2CMPLTS_RRR_0_OPCODE_X0 = 122,
-  V2CMPLTS_RRR_0_OPCODE_X1 = 78,
-  V2CMPLTUI_IMM8_OPCODE_X0 = 17,
-  V2CMPLTUI_IMM8_OPCODE_X1 = 42,
-  V2CMPLTU_RRR_0_OPCODE_X0 = 123,
-  V2CMPLTU_RRR_0_OPCODE_X1 = 79,
-  V2CMPNE_RRR_0_OPCODE_X0 = 124,
-  V2CMPNE_RRR_0_OPCODE_X1 = 80,
-  V2DOTPA_RRR_0_OPCODE_X0 = 125,
-  V2DOTP_RRR_0_OPCODE_X0 = 126,
-  V2INT_H_RRR_0_OPCODE_X0 = 127,
-  V2INT_H_RRR_0_OPCODE_X1 = 81,
-  V2INT_L_RRR_0_OPCODE_X0 = 128,
-  V2INT_L_RRR_0_OPCODE_X1 = 82,
-  V2MAXSI_IMM8_OPCODE_X0 = 18,
-  V2MAXSI_IMM8_OPCODE_X1 = 43,
-  V2MAXS_RRR_0_OPCODE_X0 = 129,
-  V2MAXS_RRR_0_OPCODE_X1 = 83,
-  V2MINSI_IMM8_OPCODE_X0 = 19,
-  V2MINSI_IMM8_OPCODE_X1 = 44,
-  V2MINS_RRR_0_OPCODE_X0 = 130,
-  V2MINS_RRR_0_OPCODE_X1 = 84,
-  V2MNZ_RRR_0_OPCODE_X0 = 131,
-  V2MNZ_RRR_0_OPCODE_X1 = 85,
-  V2MULFSC_RRR_0_OPCODE_X0 = 132,
-  V2MULS_RRR_0_OPCODE_X0 = 133,
-  V2MULTS_RRR_0_OPCODE_X0 = 134,
-  V2MZ_RRR_0_OPCODE_X0 = 135,
-  V2MZ_RRR_0_OPCODE_X1 = 86,
-  V2PACKH_RRR_0_OPCODE_X0 = 136,
-  V2PACKH_RRR_0_OPCODE_X1 = 87,
-  V2PACKL_RRR_0_OPCODE_X0 = 137,
-  V2PACKL_RRR_0_OPCODE_X1 = 88,
-  V2PACKUC_RRR_0_OPCODE_X0 = 138,
-  V2PACKUC_RRR_0_OPCODE_X1 = 89,
-  V2SADAS_RRR_0_OPCODE_X0 = 139,
-  V2SADAU_RRR_0_OPCODE_X0 = 140,
-  V2SADS_RRR_0_OPCODE_X0 = 141,
-  V2SADU_RRR_0_OPCODE_X0 = 142,
-  V2SHLI_SHIFT_OPCODE_X0 = 10,
-  V2SHLI_SHIFT_OPCODE_X1 = 10,
-  V2SHLSC_RRR_0_OPCODE_X0 = 143,
-  V2SHLSC_RRR_0_OPCODE_X1 = 90,
-  V2SHL_RRR_0_OPCODE_X0 = 144,
-  V2SHL_RRR_0_OPCODE_X1 = 91,
-  V2SHRSI_SHIFT_OPCODE_X0 = 11,
-  V2SHRSI_SHIFT_OPCODE_X1 = 11,
-  V2SHRS_RRR_0_OPCODE_X0 = 145,
-  V2SHRS_RRR_0_OPCODE_X1 = 92,
-  V2SHRUI_SHIFT_OPCODE_X0 = 12,
-  V2SHRUI_SHIFT_OPCODE_X1 = 12,
-  V2SHRU_RRR_0_OPCODE_X0 = 146,
-  V2SHRU_RRR_0_OPCODE_X1 = 93,
-  V2SUBSC_RRR_0_OPCODE_X0 = 147,
-  V2SUBSC_RRR_0_OPCODE_X1 = 94,
-  V2SUB_RRR_0_OPCODE_X0 = 148,
-  V2SUB_RRR_0_OPCODE_X1 = 95,
-  V4ADDSC_RRR_0_OPCODE_X0 = 149,
-  V4ADDSC_RRR_0_OPCODE_X1 = 96,
-  V4ADD_RRR_0_OPCODE_X0 = 150,
-  V4ADD_RRR_0_OPCODE_X1 = 97,
-  V4INT_H_RRR_0_OPCODE_X0 = 151,
-  V4INT_H_RRR_0_OPCODE_X1 = 98,
-  V4INT_L_RRR_0_OPCODE_X0 = 152,
-  V4INT_L_RRR_0_OPCODE_X1 = 99,
-  V4PACKSC_RRR_0_OPCODE_X0 = 153,
-  V4PACKSC_RRR_0_OPCODE_X1 = 100,
-  V4SHLSC_RRR_0_OPCODE_X0 = 154,
-  V4SHLSC_RRR_0_OPCODE_X1 = 101,
-  V4SHL_RRR_0_OPCODE_X0 = 155,
-  V4SHL_RRR_0_OPCODE_X1 = 102,
-  V4SHRS_RRR_0_OPCODE_X0 = 156,
-  V4SHRS_RRR_0_OPCODE_X1 = 103,
-  V4SHRU_RRR_0_OPCODE_X0 = 157,
-  V4SHRU_RRR_0_OPCODE_X1 = 104,
-  V4SUBSC_RRR_0_OPCODE_X0 = 158,
-  V4SUBSC_RRR_0_OPCODE_X1 = 105,
-  V4SUB_RRR_0_OPCODE_X0 = 159,
-  V4SUB_RRR_0_OPCODE_X1 = 106,
-  WH64_UNARY_OPCODE_X1 = 38,
-  XORI_IMM8_OPCODE_X0 = 20,
-  XORI_IMM8_OPCODE_X1 = 45,
-  XOR_RRR_0_OPCODE_X0 = 160,
-  XOR_RRR_0_OPCODE_X1 = 107,
-  XOR_RRR_5_OPCODE_Y0 = 3,
-  XOR_RRR_5_OPCODE_Y1 = 3
-};
-
-#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/sigcontext.h b/arch/tile/include/asm/sigcontext.h
index 5e2d033..6348e59 100644
--- a/arch/tile/include/asm/sigcontext.h
+++ b/arch/tile/include/asm/sigcontext.h
@@ -15,6 +15,8 @@
 #ifndef _ASM_TILE_SIGCONTEXT_H
 #define _ASM_TILE_SIGCONTEXT_H
 
+/* Don't pollute the namespace since <signal.h> includes this file. */
+#define __need_int_reg_t
 #include <arch/abi.h>
 
 /*
@@ -22,14 +24,14 @@
  * but is simplified since we know the fault is from userspace.
  */
 struct sigcontext {
-	uint_reg_t gregs[53];	/* General-purpose registers.  */
-	uint_reg_t tp;		/* Aliases gregs[TREG_TP].  */
-	uint_reg_t sp;		/* Aliases gregs[TREG_SP].  */
-	uint_reg_t lr;		/* Aliases gregs[TREG_LR].  */
-	uint_reg_t pc;		/* Program counter.  */
-	uint_reg_t ics;		/* In Interrupt Critical Section?  */
-	uint_reg_t faultnum;	/* Fault number.  */
-	uint_reg_t pad[5];
+	__uint_reg_t gregs[53];	/* General-purpose registers.  */
+	__uint_reg_t tp;	/* Aliases gregs[TREG_TP].  */
+	__uint_reg_t sp;	/* Aliases gregs[TREG_SP].  */
+	__uint_reg_t lr;	/* Aliases gregs[TREG_LR].  */
+	__uint_reg_t pc;	/* Program counter.  */
+	__uint_reg_t ics;	/* In Interrupt Critical Section?  */
+	__uint_reg_t faultnum;	/* Fault number.  */
+	__uint_reg_t pad[5];
 };
 
 #endif /* _ASM_TILE_SIGCONTEXT_H */
diff --git a/arch/tile/include/asm/opcode_constants.h b/arch/tile/include/asm/tile-desc.h
similarity index 62%
rename from arch/tile/include/asm/opcode_constants.h
rename to arch/tile/include/asm/tile-desc.h
index 37a9f29..43849bf 100644
--- a/arch/tile/include/asm/opcode_constants.h
+++ b/arch/tile/include/asm/tile-desc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -12,15 +12,8 @@
  *   more details.
  */
 
-#ifndef _ASM_TILE_OPCODE_CONSTANTS_H
-#define _ASM_TILE_OPCODE_CONSTANTS_H
-
-#include <arch/chip.h>
-
-#if CHIP_WORD_SIZE() == 64
-#include <asm/opcode_constants_64.h>
+#ifndef __tilegx__
+#include <asm/tile-desc_32.h>
 #else
-#include <asm/opcode_constants_32.h>
+#include <asm/tile-desc_64.h>
 #endif
-
-#endif /* _ASM_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/tile-desc_32.h b/arch/tile/include/asm/tile-desc_32.h
new file mode 100644
index 0000000..f09c5c4
--- /dev/null
+++ b/arch/tile/include/asm/tile-desc_32.h
@@ -0,0 +1,553 @@
+/* TILEPro opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
+#ifndef opcode_tilepro_h
+#define opcode_tilepro_h
+
+#include <arch/opcode.h>
+
+
+enum
+{
+  TILEPRO_MAX_OPERANDS = 5 /* mm */
+};
+
+typedef enum
+{
+  TILEPRO_OPC_BPT,
+  TILEPRO_OPC_INFO,
+  TILEPRO_OPC_INFOL,
+  TILEPRO_OPC_J,
+  TILEPRO_OPC_JAL,
+  TILEPRO_OPC_MOVE,
+  TILEPRO_OPC_MOVE_SN,
+  TILEPRO_OPC_MOVEI,
+  TILEPRO_OPC_MOVEI_SN,
+  TILEPRO_OPC_MOVELI,
+  TILEPRO_OPC_MOVELI_SN,
+  TILEPRO_OPC_MOVELIS,
+  TILEPRO_OPC_PREFETCH,
+  TILEPRO_OPC_RAISE,
+  TILEPRO_OPC_ADD,
+  TILEPRO_OPC_ADD_SN,
+  TILEPRO_OPC_ADDB,
+  TILEPRO_OPC_ADDB_SN,
+  TILEPRO_OPC_ADDBS_U,
+  TILEPRO_OPC_ADDBS_U_SN,
+  TILEPRO_OPC_ADDH,
+  TILEPRO_OPC_ADDH_SN,
+  TILEPRO_OPC_ADDHS,
+  TILEPRO_OPC_ADDHS_SN,
+  TILEPRO_OPC_ADDI,
+  TILEPRO_OPC_ADDI_SN,
+  TILEPRO_OPC_ADDIB,
+  TILEPRO_OPC_ADDIB_SN,
+  TILEPRO_OPC_ADDIH,
+  TILEPRO_OPC_ADDIH_SN,
+  TILEPRO_OPC_ADDLI,
+  TILEPRO_OPC_ADDLI_SN,
+  TILEPRO_OPC_ADDLIS,
+  TILEPRO_OPC_ADDS,
+  TILEPRO_OPC_ADDS_SN,
+  TILEPRO_OPC_ADIFFB_U,
+  TILEPRO_OPC_ADIFFB_U_SN,
+  TILEPRO_OPC_ADIFFH,
+  TILEPRO_OPC_ADIFFH_SN,
+  TILEPRO_OPC_AND,
+  TILEPRO_OPC_AND_SN,
+  TILEPRO_OPC_ANDI,
+  TILEPRO_OPC_ANDI_SN,
+  TILEPRO_OPC_AULI,
+  TILEPRO_OPC_AVGB_U,
+  TILEPRO_OPC_AVGB_U_SN,
+  TILEPRO_OPC_AVGH,
+  TILEPRO_OPC_AVGH_SN,
+  TILEPRO_OPC_BBNS,
+  TILEPRO_OPC_BBNS_SN,
+  TILEPRO_OPC_BBNST,
+  TILEPRO_OPC_BBNST_SN,
+  TILEPRO_OPC_BBS,
+  TILEPRO_OPC_BBS_SN,
+  TILEPRO_OPC_BBST,
+  TILEPRO_OPC_BBST_SN,
+  TILEPRO_OPC_BGEZ,
+  TILEPRO_OPC_BGEZ_SN,
+  TILEPRO_OPC_BGEZT,
+  TILEPRO_OPC_BGEZT_SN,
+  TILEPRO_OPC_BGZ,
+  TILEPRO_OPC_BGZ_SN,
+  TILEPRO_OPC_BGZT,
+  TILEPRO_OPC_BGZT_SN,
+  TILEPRO_OPC_BITX,
+  TILEPRO_OPC_BITX_SN,
+  TILEPRO_OPC_BLEZ,
+  TILEPRO_OPC_BLEZ_SN,
+  TILEPRO_OPC_BLEZT,
+  TILEPRO_OPC_BLEZT_SN,
+  TILEPRO_OPC_BLZ,
+  TILEPRO_OPC_BLZ_SN,
+  TILEPRO_OPC_BLZT,
+  TILEPRO_OPC_BLZT_SN,
+  TILEPRO_OPC_BNZ,
+  TILEPRO_OPC_BNZ_SN,
+  TILEPRO_OPC_BNZT,
+  TILEPRO_OPC_BNZT_SN,
+  TILEPRO_OPC_BYTEX,
+  TILEPRO_OPC_BYTEX_SN,
+  TILEPRO_OPC_BZ,
+  TILEPRO_OPC_BZ_SN,
+  TILEPRO_OPC_BZT,
+  TILEPRO_OPC_BZT_SN,
+  TILEPRO_OPC_CLZ,
+  TILEPRO_OPC_CLZ_SN,
+  TILEPRO_OPC_CRC32_32,
+  TILEPRO_OPC_CRC32_32_SN,
+  TILEPRO_OPC_CRC32_8,
+  TILEPRO_OPC_CRC32_8_SN,
+  TILEPRO_OPC_CTZ,
+  TILEPRO_OPC_CTZ_SN,
+  TILEPRO_OPC_DRAIN,
+  TILEPRO_OPC_DTLBPR,
+  TILEPRO_OPC_DWORD_ALIGN,
+  TILEPRO_OPC_DWORD_ALIGN_SN,
+  TILEPRO_OPC_FINV,
+  TILEPRO_OPC_FLUSH,
+  TILEPRO_OPC_FNOP,
+  TILEPRO_OPC_ICOH,
+  TILEPRO_OPC_ILL,
+  TILEPRO_OPC_INTHB,
+  TILEPRO_OPC_INTHB_SN,
+  TILEPRO_OPC_INTHH,
+  TILEPRO_OPC_INTHH_SN,
+  TILEPRO_OPC_INTLB,
+  TILEPRO_OPC_INTLB_SN,
+  TILEPRO_OPC_INTLH,
+  TILEPRO_OPC_INTLH_SN,
+  TILEPRO_OPC_INV,
+  TILEPRO_OPC_IRET,
+  TILEPRO_OPC_JALB,
+  TILEPRO_OPC_JALF,
+  TILEPRO_OPC_JALR,
+  TILEPRO_OPC_JALRP,
+  TILEPRO_OPC_JB,
+  TILEPRO_OPC_JF,
+  TILEPRO_OPC_JR,
+  TILEPRO_OPC_JRP,
+  TILEPRO_OPC_LB,
+  TILEPRO_OPC_LB_SN,
+  TILEPRO_OPC_LB_U,
+  TILEPRO_OPC_LB_U_SN,
+  TILEPRO_OPC_LBADD,
+  TILEPRO_OPC_LBADD_SN,
+  TILEPRO_OPC_LBADD_U,
+  TILEPRO_OPC_LBADD_U_SN,
+  TILEPRO_OPC_LH,
+  TILEPRO_OPC_LH_SN,
+  TILEPRO_OPC_LH_U,
+  TILEPRO_OPC_LH_U_SN,
+  TILEPRO_OPC_LHADD,
+  TILEPRO_OPC_LHADD_SN,
+  TILEPRO_OPC_LHADD_U,
+  TILEPRO_OPC_LHADD_U_SN,
+  TILEPRO_OPC_LNK,
+  TILEPRO_OPC_LNK_SN,
+  TILEPRO_OPC_LW,
+  TILEPRO_OPC_LW_SN,
+  TILEPRO_OPC_LW_NA,
+  TILEPRO_OPC_LW_NA_SN,
+  TILEPRO_OPC_LWADD,
+  TILEPRO_OPC_LWADD_SN,
+  TILEPRO_OPC_LWADD_NA,
+  TILEPRO_OPC_LWADD_NA_SN,
+  TILEPRO_OPC_MAXB_U,
+  TILEPRO_OPC_MAXB_U_SN,
+  TILEPRO_OPC_MAXH,
+  TILEPRO_OPC_MAXH_SN,
+  TILEPRO_OPC_MAXIB_U,
+  TILEPRO_OPC_MAXIB_U_SN,
+  TILEPRO_OPC_MAXIH,
+  TILEPRO_OPC_MAXIH_SN,
+  TILEPRO_OPC_MF,
+  TILEPRO_OPC_MFSPR,
+  TILEPRO_OPC_MINB_U,
+  TILEPRO_OPC_MINB_U_SN,
+  TILEPRO_OPC_MINH,
+  TILEPRO_OPC_MINH_SN,
+  TILEPRO_OPC_MINIB_U,
+  TILEPRO_OPC_MINIB_U_SN,
+  TILEPRO_OPC_MINIH,
+  TILEPRO_OPC_MINIH_SN,
+  TILEPRO_OPC_MM,
+  TILEPRO_OPC_MNZ,
+  TILEPRO_OPC_MNZ_SN,
+  TILEPRO_OPC_MNZB,
+  TILEPRO_OPC_MNZB_SN,
+  TILEPRO_OPC_MNZH,
+  TILEPRO_OPC_MNZH_SN,
+  TILEPRO_OPC_MTSPR,
+  TILEPRO_OPC_MULHH_SS,
+  TILEPRO_OPC_MULHH_SS_SN,
+  TILEPRO_OPC_MULHH_SU,
+  TILEPRO_OPC_MULHH_SU_SN,
+  TILEPRO_OPC_MULHH_UU,
+  TILEPRO_OPC_MULHH_UU_SN,
+  TILEPRO_OPC_MULHHA_SS,
+  TILEPRO_OPC_MULHHA_SS_SN,
+  TILEPRO_OPC_MULHHA_SU,
+  TILEPRO_OPC_MULHHA_SU_SN,
+  TILEPRO_OPC_MULHHA_UU,
+  TILEPRO_OPC_MULHHA_UU_SN,
+  TILEPRO_OPC_MULHHSA_UU,
+  TILEPRO_OPC_MULHHSA_UU_SN,
+  TILEPRO_OPC_MULHL_SS,
+  TILEPRO_OPC_MULHL_SS_SN,
+  TILEPRO_OPC_MULHL_SU,
+  TILEPRO_OPC_MULHL_SU_SN,
+  TILEPRO_OPC_MULHL_US,
+  TILEPRO_OPC_MULHL_US_SN,
+  TILEPRO_OPC_MULHL_UU,
+  TILEPRO_OPC_MULHL_UU_SN,
+  TILEPRO_OPC_MULHLA_SS,
+  TILEPRO_OPC_MULHLA_SS_SN,
+  TILEPRO_OPC_MULHLA_SU,
+  TILEPRO_OPC_MULHLA_SU_SN,
+  TILEPRO_OPC_MULHLA_US,
+  TILEPRO_OPC_MULHLA_US_SN,
+  TILEPRO_OPC_MULHLA_UU,
+  TILEPRO_OPC_MULHLA_UU_SN,
+  TILEPRO_OPC_MULHLSA_UU,
+  TILEPRO_OPC_MULHLSA_UU_SN,
+  TILEPRO_OPC_MULLL_SS,
+  TILEPRO_OPC_MULLL_SS_SN,
+  TILEPRO_OPC_MULLL_SU,
+  TILEPRO_OPC_MULLL_SU_SN,
+  TILEPRO_OPC_MULLL_UU,
+  TILEPRO_OPC_MULLL_UU_SN,
+  TILEPRO_OPC_MULLLA_SS,
+  TILEPRO_OPC_MULLLA_SS_SN,
+  TILEPRO_OPC_MULLLA_SU,
+  TILEPRO_OPC_MULLLA_SU_SN,
+  TILEPRO_OPC_MULLLA_UU,
+  TILEPRO_OPC_MULLLA_UU_SN,
+  TILEPRO_OPC_MULLLSA_UU,
+  TILEPRO_OPC_MULLLSA_UU_SN,
+  TILEPRO_OPC_MVNZ,
+  TILEPRO_OPC_MVNZ_SN,
+  TILEPRO_OPC_MVZ,
+  TILEPRO_OPC_MVZ_SN,
+  TILEPRO_OPC_MZ,
+  TILEPRO_OPC_MZ_SN,
+  TILEPRO_OPC_MZB,
+  TILEPRO_OPC_MZB_SN,
+  TILEPRO_OPC_MZH,
+  TILEPRO_OPC_MZH_SN,
+  TILEPRO_OPC_NAP,
+  TILEPRO_OPC_NOP,
+  TILEPRO_OPC_NOR,
+  TILEPRO_OPC_NOR_SN,
+  TILEPRO_OPC_OR,
+  TILEPRO_OPC_OR_SN,
+  TILEPRO_OPC_ORI,
+  TILEPRO_OPC_ORI_SN,
+  TILEPRO_OPC_PACKBS_U,
+  TILEPRO_OPC_PACKBS_U_SN,
+  TILEPRO_OPC_PACKHB,
+  TILEPRO_OPC_PACKHB_SN,
+  TILEPRO_OPC_PACKHS,
+  TILEPRO_OPC_PACKHS_SN,
+  TILEPRO_OPC_PACKLB,
+  TILEPRO_OPC_PACKLB_SN,
+  TILEPRO_OPC_PCNT,
+  TILEPRO_OPC_PCNT_SN,
+  TILEPRO_OPC_RL,
+  TILEPRO_OPC_RL_SN,
+  TILEPRO_OPC_RLI,
+  TILEPRO_OPC_RLI_SN,
+  TILEPRO_OPC_S1A,
+  TILEPRO_OPC_S1A_SN,
+  TILEPRO_OPC_S2A,
+  TILEPRO_OPC_S2A_SN,
+  TILEPRO_OPC_S3A,
+  TILEPRO_OPC_S3A_SN,
+  TILEPRO_OPC_SADAB_U,
+  TILEPRO_OPC_SADAB_U_SN,
+  TILEPRO_OPC_SADAH,
+  TILEPRO_OPC_SADAH_SN,
+  TILEPRO_OPC_SADAH_U,
+  TILEPRO_OPC_SADAH_U_SN,
+  TILEPRO_OPC_SADB_U,
+  TILEPRO_OPC_SADB_U_SN,
+  TILEPRO_OPC_SADH,
+  TILEPRO_OPC_SADH_SN,
+  TILEPRO_OPC_SADH_U,
+  TILEPRO_OPC_SADH_U_SN,
+  TILEPRO_OPC_SB,
+  TILEPRO_OPC_SBADD,
+  TILEPRO_OPC_SEQ,
+  TILEPRO_OPC_SEQ_SN,
+  TILEPRO_OPC_SEQB,
+  TILEPRO_OPC_SEQB_SN,
+  TILEPRO_OPC_SEQH,
+  TILEPRO_OPC_SEQH_SN,
+  TILEPRO_OPC_SEQI,
+  TILEPRO_OPC_SEQI_SN,
+  TILEPRO_OPC_SEQIB,
+  TILEPRO_OPC_SEQIB_SN,
+  TILEPRO_OPC_SEQIH,
+  TILEPRO_OPC_SEQIH_SN,
+  TILEPRO_OPC_SH,
+  TILEPRO_OPC_SHADD,
+  TILEPRO_OPC_SHL,
+  TILEPRO_OPC_SHL_SN,
+  TILEPRO_OPC_SHLB,
+  TILEPRO_OPC_SHLB_SN,
+  TILEPRO_OPC_SHLH,
+  TILEPRO_OPC_SHLH_SN,
+  TILEPRO_OPC_SHLI,
+  TILEPRO_OPC_SHLI_SN,
+  TILEPRO_OPC_SHLIB,
+  TILEPRO_OPC_SHLIB_SN,
+  TILEPRO_OPC_SHLIH,
+  TILEPRO_OPC_SHLIH_SN,
+  TILEPRO_OPC_SHR,
+  TILEPRO_OPC_SHR_SN,
+  TILEPRO_OPC_SHRB,
+  TILEPRO_OPC_SHRB_SN,
+  TILEPRO_OPC_SHRH,
+  TILEPRO_OPC_SHRH_SN,
+  TILEPRO_OPC_SHRI,
+  TILEPRO_OPC_SHRI_SN,
+  TILEPRO_OPC_SHRIB,
+  TILEPRO_OPC_SHRIB_SN,
+  TILEPRO_OPC_SHRIH,
+  TILEPRO_OPC_SHRIH_SN,
+  TILEPRO_OPC_SLT,
+  TILEPRO_OPC_SLT_SN,
+  TILEPRO_OPC_SLT_U,
+  TILEPRO_OPC_SLT_U_SN,
+  TILEPRO_OPC_SLTB,
+  TILEPRO_OPC_SLTB_SN,
+  TILEPRO_OPC_SLTB_U,
+  TILEPRO_OPC_SLTB_U_SN,
+  TILEPRO_OPC_SLTE,
+  TILEPRO_OPC_SLTE_SN,
+  TILEPRO_OPC_SLTE_U,
+  TILEPRO_OPC_SLTE_U_SN,
+  TILEPRO_OPC_SLTEB,
+  TILEPRO_OPC_SLTEB_SN,
+  TILEPRO_OPC_SLTEB_U,
+  TILEPRO_OPC_SLTEB_U_SN,
+  TILEPRO_OPC_SLTEH,
+  TILEPRO_OPC_SLTEH_SN,
+  TILEPRO_OPC_SLTEH_U,
+  TILEPRO_OPC_SLTEH_U_SN,
+  TILEPRO_OPC_SLTH,
+  TILEPRO_OPC_SLTH_SN,
+  TILEPRO_OPC_SLTH_U,
+  TILEPRO_OPC_SLTH_U_SN,
+  TILEPRO_OPC_SLTI,
+  TILEPRO_OPC_SLTI_SN,
+  TILEPRO_OPC_SLTI_U,
+  TILEPRO_OPC_SLTI_U_SN,
+  TILEPRO_OPC_SLTIB,
+  TILEPRO_OPC_SLTIB_SN,
+  TILEPRO_OPC_SLTIB_U,
+  TILEPRO_OPC_SLTIB_U_SN,
+  TILEPRO_OPC_SLTIH,
+  TILEPRO_OPC_SLTIH_SN,
+  TILEPRO_OPC_SLTIH_U,
+  TILEPRO_OPC_SLTIH_U_SN,
+  TILEPRO_OPC_SNE,
+  TILEPRO_OPC_SNE_SN,
+  TILEPRO_OPC_SNEB,
+  TILEPRO_OPC_SNEB_SN,
+  TILEPRO_OPC_SNEH,
+  TILEPRO_OPC_SNEH_SN,
+  TILEPRO_OPC_SRA,
+  TILEPRO_OPC_SRA_SN,
+  TILEPRO_OPC_SRAB,
+  TILEPRO_OPC_SRAB_SN,
+  TILEPRO_OPC_SRAH,
+  TILEPRO_OPC_SRAH_SN,
+  TILEPRO_OPC_SRAI,
+  TILEPRO_OPC_SRAI_SN,
+  TILEPRO_OPC_SRAIB,
+  TILEPRO_OPC_SRAIB_SN,
+  TILEPRO_OPC_SRAIH,
+  TILEPRO_OPC_SRAIH_SN,
+  TILEPRO_OPC_SUB,
+  TILEPRO_OPC_SUB_SN,
+  TILEPRO_OPC_SUBB,
+  TILEPRO_OPC_SUBB_SN,
+  TILEPRO_OPC_SUBBS_U,
+  TILEPRO_OPC_SUBBS_U_SN,
+  TILEPRO_OPC_SUBH,
+  TILEPRO_OPC_SUBH_SN,
+  TILEPRO_OPC_SUBHS,
+  TILEPRO_OPC_SUBHS_SN,
+  TILEPRO_OPC_SUBS,
+  TILEPRO_OPC_SUBS_SN,
+  TILEPRO_OPC_SW,
+  TILEPRO_OPC_SWADD,
+  TILEPRO_OPC_SWINT0,
+  TILEPRO_OPC_SWINT1,
+  TILEPRO_OPC_SWINT2,
+  TILEPRO_OPC_SWINT3,
+  TILEPRO_OPC_TBLIDXB0,
+  TILEPRO_OPC_TBLIDXB0_SN,
+  TILEPRO_OPC_TBLIDXB1,
+  TILEPRO_OPC_TBLIDXB1_SN,
+  TILEPRO_OPC_TBLIDXB2,
+  TILEPRO_OPC_TBLIDXB2_SN,
+  TILEPRO_OPC_TBLIDXB3,
+  TILEPRO_OPC_TBLIDXB3_SN,
+  TILEPRO_OPC_TNS,
+  TILEPRO_OPC_TNS_SN,
+  TILEPRO_OPC_WH64,
+  TILEPRO_OPC_XOR,
+  TILEPRO_OPC_XOR_SN,
+  TILEPRO_OPC_XORI,
+  TILEPRO_OPC_XORI_SN,
+  TILEPRO_OPC_NONE
+} tilepro_mnemonic;
+
+
+
+
+typedef enum
+{
+  TILEPRO_PIPELINE_X0,
+  TILEPRO_PIPELINE_X1,
+  TILEPRO_PIPELINE_Y0,
+  TILEPRO_PIPELINE_Y1,
+  TILEPRO_PIPELINE_Y2,
+} tilepro_pipeline;
+
+#define tilepro_is_x_pipeline(p) ((int)(p) <= (int)TILEPRO_PIPELINE_X1)
+
+typedef enum
+{
+  TILEPRO_OP_TYPE_REGISTER,
+  TILEPRO_OP_TYPE_IMMEDIATE,
+  TILEPRO_OP_TYPE_ADDRESS,
+  TILEPRO_OP_TYPE_SPR
+} tilepro_operand_type;
+
+struct tilepro_operand
+{
+  /* Is this operand a register, immediate or address? */
+  tilepro_operand_type type;
+
+  /* The default relocation type for this operand.  */
+  signed int default_reloc : 16;
+
+  /* How many bits is this value? (used for range checking) */
+  unsigned int num_bits : 5;
+
+  /* Is the value signed? (used for range checking) */
+  unsigned int is_signed : 1;
+
+  /* Is this operand a source register? */
+  unsigned int is_src_reg : 1;
+
+  /* Is this operand written? (i.e. is it a destination register) */
+  unsigned int is_dest_reg : 1;
+
+  /* Is this operand PC-relative? */
+  unsigned int is_pc_relative : 1;
+
+  /* By how many bits do we right shift the value before inserting? */
+  unsigned int rightshift : 2;
+
+  /* Return the bits for this operand to be ORed into an existing bundle. */
+  tilepro_bundle_bits (*insert) (int op);
+
+  /* Extract this operand and return it. */
+  unsigned int (*extract) (tilepro_bundle_bits bundle);
+};
+
+
+extern const struct tilepro_operand tilepro_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tilepro_bundle_decoder_fsms[TILEPRO_NUM_PIPELINE_ENCODINGS];
+
+
+struct tilepro_opcode
+{
+  /* The opcode mnemonic, e.g. "add" */
+  const char *name;
+
+  /* The enum value for this mnemonic. */
+  tilepro_mnemonic mnemonic;
+
+  /* A bit mask of which of the five pipes this instruction
+     is compatible with:
+     X0  0x01
+     X1  0x02
+     Y0  0x04
+     Y1  0x08
+     Y2  0x10 */
+  unsigned char pipes;
+
+  /* How many operands are there? */
+  unsigned char num_operands;
+
+  /* Which register does this write implicitly, or TREG_ZERO if none? */
+  unsigned char implicitly_written_register;
+
+  /* Can this be bundled with other instructions (almost always true). */
+  unsigned char can_bundle;
+
+  /* The description of the operands. Each of these is an
+   * index into the tilepro_operands[] table. */
+  unsigned char operands[TILEPRO_NUM_PIPELINE_ENCODINGS][TILEPRO_MAX_OPERANDS];
+
+};
+
+extern const struct tilepro_opcode tilepro_opcodes[];
+
+
+/* Used for non-textual disassembly into structs. */
+struct tilepro_decoded_instruction
+{
+  const struct tilepro_opcode *opcode;
+  const struct tilepro_operand *operands[TILEPRO_MAX_OPERANDS];
+  int operand_values[TILEPRO_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tilepro(tilepro_bundle_bits bits,
+                              unsigned int pc,
+                              struct tilepro_decoded_instruction
+                              decoded[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+/* Given a set of bundle bits and a specific pipe, returns which
+ * instruction the bundle contains in that pipe.
+ */
+extern const struct tilepro_opcode *
+find_opcode(tilepro_bundle_bits bits, tilepro_pipeline pipe);
+
+
+
+#endif /* opcode_tilepro_h */
diff --git a/arch/tile/include/asm/tile-desc_64.h b/arch/tile/include/asm/tile-desc_64.h
new file mode 100644
index 0000000..1819efc
--- /dev/null
+++ b/arch/tile/include/asm/tile-desc_64.h
@@ -0,0 +1,483 @@
+/* TILE-Gx opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
+#ifndef opcode_tile_h
+#define opcode_tile_h
+
+#include <arch/opcode.h>
+
+
+enum
+{
+  TILEGX_MAX_OPERANDS = 4 /* bfexts */
+};
+
+typedef enum
+{
+  TILEGX_OPC_BPT,
+  TILEGX_OPC_INFO,
+  TILEGX_OPC_INFOL,
+  TILEGX_OPC_MOVE,
+  TILEGX_OPC_MOVEI,
+  TILEGX_OPC_MOVELI,
+  TILEGX_OPC_PREFETCH,
+  TILEGX_OPC_PREFETCH_ADD_L1,
+  TILEGX_OPC_PREFETCH_ADD_L1_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L2,
+  TILEGX_OPC_PREFETCH_ADD_L2_FAULT,
+  TILEGX_OPC_PREFETCH_ADD_L3,
+  TILEGX_OPC_PREFETCH_ADD_L3_FAULT,
+  TILEGX_OPC_PREFETCH_L1,
+  TILEGX_OPC_PREFETCH_L1_FAULT,
+  TILEGX_OPC_PREFETCH_L2,
+  TILEGX_OPC_PREFETCH_L2_FAULT,
+  TILEGX_OPC_PREFETCH_L3,
+  TILEGX_OPC_PREFETCH_L3_FAULT,
+  TILEGX_OPC_RAISE,
+  TILEGX_OPC_ADD,
+  TILEGX_OPC_ADDI,
+  TILEGX_OPC_ADDLI,
+  TILEGX_OPC_ADDX,
+  TILEGX_OPC_ADDXI,
+  TILEGX_OPC_ADDXLI,
+  TILEGX_OPC_ADDXSC,
+  TILEGX_OPC_AND,
+  TILEGX_OPC_ANDI,
+  TILEGX_OPC_BEQZ,
+  TILEGX_OPC_BEQZT,
+  TILEGX_OPC_BFEXTS,
+  TILEGX_OPC_BFEXTU,
+  TILEGX_OPC_BFINS,
+  TILEGX_OPC_BGEZ,
+  TILEGX_OPC_BGEZT,
+  TILEGX_OPC_BGTZ,
+  TILEGX_OPC_BGTZT,
+  TILEGX_OPC_BLBC,
+  TILEGX_OPC_BLBCT,
+  TILEGX_OPC_BLBS,
+  TILEGX_OPC_BLBST,
+  TILEGX_OPC_BLEZ,
+  TILEGX_OPC_BLEZT,
+  TILEGX_OPC_BLTZ,
+  TILEGX_OPC_BLTZT,
+  TILEGX_OPC_BNEZ,
+  TILEGX_OPC_BNEZT,
+  TILEGX_OPC_CLZ,
+  TILEGX_OPC_CMOVEQZ,
+  TILEGX_OPC_CMOVNEZ,
+  TILEGX_OPC_CMPEQ,
+  TILEGX_OPC_CMPEQI,
+  TILEGX_OPC_CMPEXCH,
+  TILEGX_OPC_CMPEXCH4,
+  TILEGX_OPC_CMPLES,
+  TILEGX_OPC_CMPLEU,
+  TILEGX_OPC_CMPLTS,
+  TILEGX_OPC_CMPLTSI,
+  TILEGX_OPC_CMPLTU,
+  TILEGX_OPC_CMPLTUI,
+  TILEGX_OPC_CMPNE,
+  TILEGX_OPC_CMUL,
+  TILEGX_OPC_CMULA,
+  TILEGX_OPC_CMULAF,
+  TILEGX_OPC_CMULF,
+  TILEGX_OPC_CMULFR,
+  TILEGX_OPC_CMULH,
+  TILEGX_OPC_CMULHR,
+  TILEGX_OPC_CRC32_32,
+  TILEGX_OPC_CRC32_8,
+  TILEGX_OPC_CTZ,
+  TILEGX_OPC_DBLALIGN,
+  TILEGX_OPC_DBLALIGN2,
+  TILEGX_OPC_DBLALIGN4,
+  TILEGX_OPC_DBLALIGN6,
+  TILEGX_OPC_DRAIN,
+  TILEGX_OPC_DTLBPR,
+  TILEGX_OPC_EXCH,
+  TILEGX_OPC_EXCH4,
+  TILEGX_OPC_FDOUBLE_ADD_FLAGS,
+  TILEGX_OPC_FDOUBLE_ADDSUB,
+  TILEGX_OPC_FDOUBLE_MUL_FLAGS,
+  TILEGX_OPC_FDOUBLE_PACK1,
+  TILEGX_OPC_FDOUBLE_PACK2,
+  TILEGX_OPC_FDOUBLE_SUB_FLAGS,
+  TILEGX_OPC_FDOUBLE_UNPACK_MAX,
+  TILEGX_OPC_FDOUBLE_UNPACK_MIN,
+  TILEGX_OPC_FETCHADD,
+  TILEGX_OPC_FETCHADD4,
+  TILEGX_OPC_FETCHADDGEZ,
+  TILEGX_OPC_FETCHADDGEZ4,
+  TILEGX_OPC_FETCHAND,
+  TILEGX_OPC_FETCHAND4,
+  TILEGX_OPC_FETCHOR,
+  TILEGX_OPC_FETCHOR4,
+  TILEGX_OPC_FINV,
+  TILEGX_OPC_FLUSH,
+  TILEGX_OPC_FLUSHWB,
+  TILEGX_OPC_FNOP,
+  TILEGX_OPC_FSINGLE_ADD1,
+  TILEGX_OPC_FSINGLE_ADDSUB2,
+  TILEGX_OPC_FSINGLE_MUL1,
+  TILEGX_OPC_FSINGLE_MUL2,
+  TILEGX_OPC_FSINGLE_PACK1,
+  TILEGX_OPC_FSINGLE_PACK2,
+  TILEGX_OPC_FSINGLE_SUB1,
+  TILEGX_OPC_ICOH,
+  TILEGX_OPC_ILL,
+  TILEGX_OPC_INV,
+  TILEGX_OPC_IRET,
+  TILEGX_OPC_J,
+  TILEGX_OPC_JAL,
+  TILEGX_OPC_JALR,
+  TILEGX_OPC_JALRP,
+  TILEGX_OPC_JR,
+  TILEGX_OPC_JRP,
+  TILEGX_OPC_LD,
+  TILEGX_OPC_LD1S,
+  TILEGX_OPC_LD1S_ADD,
+  TILEGX_OPC_LD1U,
+  TILEGX_OPC_LD1U_ADD,
+  TILEGX_OPC_LD2S,
+  TILEGX_OPC_LD2S_ADD,
+  TILEGX_OPC_LD2U,
+  TILEGX_OPC_LD2U_ADD,
+  TILEGX_OPC_LD4S,
+  TILEGX_OPC_LD4S_ADD,
+  TILEGX_OPC_LD4U,
+  TILEGX_OPC_LD4U_ADD,
+  TILEGX_OPC_LD_ADD,
+  TILEGX_OPC_LDNA,
+  TILEGX_OPC_LDNA_ADD,
+  TILEGX_OPC_LDNT,
+  TILEGX_OPC_LDNT1S,
+  TILEGX_OPC_LDNT1S_ADD,
+  TILEGX_OPC_LDNT1U,
+  TILEGX_OPC_LDNT1U_ADD,
+  TILEGX_OPC_LDNT2S,
+  TILEGX_OPC_LDNT2S_ADD,
+  TILEGX_OPC_LDNT2U,
+  TILEGX_OPC_LDNT2U_ADD,
+  TILEGX_OPC_LDNT4S,
+  TILEGX_OPC_LDNT4S_ADD,
+  TILEGX_OPC_LDNT4U,
+  TILEGX_OPC_LDNT4U_ADD,
+  TILEGX_OPC_LDNT_ADD,
+  TILEGX_OPC_LNK,
+  TILEGX_OPC_MF,
+  TILEGX_OPC_MFSPR,
+  TILEGX_OPC_MM,
+  TILEGX_OPC_MNZ,
+  TILEGX_OPC_MTSPR,
+  TILEGX_OPC_MUL_HS_HS,
+  TILEGX_OPC_MUL_HS_HU,
+  TILEGX_OPC_MUL_HS_LS,
+  TILEGX_OPC_MUL_HS_LU,
+  TILEGX_OPC_MUL_HU_HU,
+  TILEGX_OPC_MUL_HU_LS,
+  TILEGX_OPC_MUL_HU_LU,
+  TILEGX_OPC_MUL_LS_LS,
+  TILEGX_OPC_MUL_LS_LU,
+  TILEGX_OPC_MUL_LU_LU,
+  TILEGX_OPC_MULA_HS_HS,
+  TILEGX_OPC_MULA_HS_HU,
+  TILEGX_OPC_MULA_HS_LS,
+  TILEGX_OPC_MULA_HS_LU,
+  TILEGX_OPC_MULA_HU_HU,
+  TILEGX_OPC_MULA_HU_LS,
+  TILEGX_OPC_MULA_HU_LU,
+  TILEGX_OPC_MULA_LS_LS,
+  TILEGX_OPC_MULA_LS_LU,
+  TILEGX_OPC_MULA_LU_LU,
+  TILEGX_OPC_MULAX,
+  TILEGX_OPC_MULX,
+  TILEGX_OPC_MZ,
+  TILEGX_OPC_NAP,
+  TILEGX_OPC_NOP,
+  TILEGX_OPC_NOR,
+  TILEGX_OPC_OR,
+  TILEGX_OPC_ORI,
+  TILEGX_OPC_PCNT,
+  TILEGX_OPC_REVBITS,
+  TILEGX_OPC_REVBYTES,
+  TILEGX_OPC_ROTL,
+  TILEGX_OPC_ROTLI,
+  TILEGX_OPC_SHL,
+  TILEGX_OPC_SHL16INSLI,
+  TILEGX_OPC_SHL1ADD,
+  TILEGX_OPC_SHL1ADDX,
+  TILEGX_OPC_SHL2ADD,
+  TILEGX_OPC_SHL2ADDX,
+  TILEGX_OPC_SHL3ADD,
+  TILEGX_OPC_SHL3ADDX,
+  TILEGX_OPC_SHLI,
+  TILEGX_OPC_SHLX,
+  TILEGX_OPC_SHLXI,
+  TILEGX_OPC_SHRS,
+  TILEGX_OPC_SHRSI,
+  TILEGX_OPC_SHRU,
+  TILEGX_OPC_SHRUI,
+  TILEGX_OPC_SHRUX,
+  TILEGX_OPC_SHRUXI,
+  TILEGX_OPC_SHUFFLEBYTES,
+  TILEGX_OPC_ST,
+  TILEGX_OPC_ST1,
+  TILEGX_OPC_ST1_ADD,
+  TILEGX_OPC_ST2,
+  TILEGX_OPC_ST2_ADD,
+  TILEGX_OPC_ST4,
+  TILEGX_OPC_ST4_ADD,
+  TILEGX_OPC_ST_ADD,
+  TILEGX_OPC_STNT,
+  TILEGX_OPC_STNT1,
+  TILEGX_OPC_STNT1_ADD,
+  TILEGX_OPC_STNT2,
+  TILEGX_OPC_STNT2_ADD,
+  TILEGX_OPC_STNT4,
+  TILEGX_OPC_STNT4_ADD,
+  TILEGX_OPC_STNT_ADD,
+  TILEGX_OPC_SUB,
+  TILEGX_OPC_SUBX,
+  TILEGX_OPC_SUBXSC,
+  TILEGX_OPC_SWINT0,
+  TILEGX_OPC_SWINT1,
+  TILEGX_OPC_SWINT2,
+  TILEGX_OPC_SWINT3,
+  TILEGX_OPC_TBLIDXB0,
+  TILEGX_OPC_TBLIDXB1,
+  TILEGX_OPC_TBLIDXB2,
+  TILEGX_OPC_TBLIDXB3,
+  TILEGX_OPC_V1ADD,
+  TILEGX_OPC_V1ADDI,
+  TILEGX_OPC_V1ADDUC,
+  TILEGX_OPC_V1ADIFFU,
+  TILEGX_OPC_V1AVGU,
+  TILEGX_OPC_V1CMPEQ,
+  TILEGX_OPC_V1CMPEQI,
+  TILEGX_OPC_V1CMPLES,
+  TILEGX_OPC_V1CMPLEU,
+  TILEGX_OPC_V1CMPLTS,
+  TILEGX_OPC_V1CMPLTSI,
+  TILEGX_OPC_V1CMPLTU,
+  TILEGX_OPC_V1CMPLTUI,
+  TILEGX_OPC_V1CMPNE,
+  TILEGX_OPC_V1DDOTPU,
+  TILEGX_OPC_V1DDOTPUA,
+  TILEGX_OPC_V1DDOTPUS,
+  TILEGX_OPC_V1DDOTPUSA,
+  TILEGX_OPC_V1DOTP,
+  TILEGX_OPC_V1DOTPA,
+  TILEGX_OPC_V1DOTPU,
+  TILEGX_OPC_V1DOTPUA,
+  TILEGX_OPC_V1DOTPUS,
+  TILEGX_OPC_V1DOTPUSA,
+  TILEGX_OPC_V1INT_H,
+  TILEGX_OPC_V1INT_L,
+  TILEGX_OPC_V1MAXU,
+  TILEGX_OPC_V1MAXUI,
+  TILEGX_OPC_V1MINU,
+  TILEGX_OPC_V1MINUI,
+  TILEGX_OPC_V1MNZ,
+  TILEGX_OPC_V1MULTU,
+  TILEGX_OPC_V1MULU,
+  TILEGX_OPC_V1MULUS,
+  TILEGX_OPC_V1MZ,
+  TILEGX_OPC_V1SADAU,
+  TILEGX_OPC_V1SADU,
+  TILEGX_OPC_V1SHL,
+  TILEGX_OPC_V1SHLI,
+  TILEGX_OPC_V1SHRS,
+  TILEGX_OPC_V1SHRSI,
+  TILEGX_OPC_V1SHRU,
+  TILEGX_OPC_V1SHRUI,
+  TILEGX_OPC_V1SUB,
+  TILEGX_OPC_V1SUBUC,
+  TILEGX_OPC_V2ADD,
+  TILEGX_OPC_V2ADDI,
+  TILEGX_OPC_V2ADDSC,
+  TILEGX_OPC_V2ADIFFS,
+  TILEGX_OPC_V2AVGS,
+  TILEGX_OPC_V2CMPEQ,
+  TILEGX_OPC_V2CMPEQI,
+  TILEGX_OPC_V2CMPLES,
+  TILEGX_OPC_V2CMPLEU,
+  TILEGX_OPC_V2CMPLTS,
+  TILEGX_OPC_V2CMPLTSI,
+  TILEGX_OPC_V2CMPLTU,
+  TILEGX_OPC_V2CMPLTUI,
+  TILEGX_OPC_V2CMPNE,
+  TILEGX_OPC_V2DOTP,
+  TILEGX_OPC_V2DOTPA,
+  TILEGX_OPC_V2INT_H,
+  TILEGX_OPC_V2INT_L,
+  TILEGX_OPC_V2MAXS,
+  TILEGX_OPC_V2MAXSI,
+  TILEGX_OPC_V2MINS,
+  TILEGX_OPC_V2MINSI,
+  TILEGX_OPC_V2MNZ,
+  TILEGX_OPC_V2MULFSC,
+  TILEGX_OPC_V2MULS,
+  TILEGX_OPC_V2MULTS,
+  TILEGX_OPC_V2MZ,
+  TILEGX_OPC_V2PACKH,
+  TILEGX_OPC_V2PACKL,
+  TILEGX_OPC_V2PACKUC,
+  TILEGX_OPC_V2SADAS,
+  TILEGX_OPC_V2SADAU,
+  TILEGX_OPC_V2SADS,
+  TILEGX_OPC_V2SADU,
+  TILEGX_OPC_V2SHL,
+  TILEGX_OPC_V2SHLI,
+  TILEGX_OPC_V2SHLSC,
+  TILEGX_OPC_V2SHRS,
+  TILEGX_OPC_V2SHRSI,
+  TILEGX_OPC_V2SHRU,
+  TILEGX_OPC_V2SHRUI,
+  TILEGX_OPC_V2SUB,
+  TILEGX_OPC_V2SUBSC,
+  TILEGX_OPC_V4ADD,
+  TILEGX_OPC_V4ADDSC,
+  TILEGX_OPC_V4INT_H,
+  TILEGX_OPC_V4INT_L,
+  TILEGX_OPC_V4PACKSC,
+  TILEGX_OPC_V4SHL,
+  TILEGX_OPC_V4SHLSC,
+  TILEGX_OPC_V4SHRS,
+  TILEGX_OPC_V4SHRU,
+  TILEGX_OPC_V4SUB,
+  TILEGX_OPC_V4SUBSC,
+  TILEGX_OPC_WH64,
+  TILEGX_OPC_XOR,
+  TILEGX_OPC_XORI,
+  TILEGX_OPC_NONE
+} tilegx_mnemonic;
+
+
+
+typedef enum
+{
+  TILEGX_PIPELINE_X0,
+  TILEGX_PIPELINE_X1,
+  TILEGX_PIPELINE_Y0,
+  TILEGX_PIPELINE_Y1,
+  TILEGX_PIPELINE_Y2,
+} tilegx_pipeline;
+
+#define tilegx_is_x_pipeline(p) ((int)(p) <= (int)TILEGX_PIPELINE_X1)
+
+typedef enum
+{
+  TILEGX_OP_TYPE_REGISTER,
+  TILEGX_OP_TYPE_IMMEDIATE,
+  TILEGX_OP_TYPE_ADDRESS,
+  TILEGX_OP_TYPE_SPR
+} tilegx_operand_type;
+
+struct tilegx_operand
+{
+  /* Is this operand a register, immediate or address? */
+  tilegx_operand_type type;
+
+  /* The default relocation type for this operand.  */
+  signed int default_reloc : 16;
+
+  /* How many bits is this value? (used for range checking) */
+  unsigned int num_bits : 5;
+
+  /* Is the value signed? (used for range checking) */
+  unsigned int is_signed : 1;
+
+  /* Is this operand a source register? */
+  unsigned int is_src_reg : 1;
+
+  /* Is this operand written? (i.e. is it a destination register) */
+  unsigned int is_dest_reg : 1;
+
+  /* Is this operand PC-relative? */
+  unsigned int is_pc_relative : 1;
+
+  /* By how many bits do we right shift the value before inserting? */
+  unsigned int rightshift : 2;
+
+  /* Return the bits for this operand to be ORed into an existing bundle. */
+  tilegx_bundle_bits (*insert) (int op);
+
+  /* Extract this operand and return it. */
+  unsigned int (*extract) (tilegx_bundle_bits bundle);
+};
+
+
+extern const struct tilegx_operand tilegx_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS];
+
+
+struct tilegx_opcode
+{
+  /* The opcode mnemonic, e.g. "add" */
+  const char *name;
+
+  /* The enum value for this mnemonic. */
+  tilegx_mnemonic mnemonic;
+
+  /* A bit mask of which of the five pipes this instruction
+     is compatible with:
+     X0  0x01
+     X1  0x02
+     Y0  0x04
+     Y1  0x08
+     Y2  0x10 */
+  unsigned char pipes;
+
+  /* How many operands are there? */
+  unsigned char num_operands;
+
+  /* Which register does this write implicitly, or TREG_ZERO if none? */
+  unsigned char implicitly_written_register;
+
+  /* Can this be bundled with other instructions (almost always true). */
+  unsigned char can_bundle;
+
+  /* The description of the operands. Each of these is an
+   * index into the tilegx_operands[] table. */
+  unsigned char operands[TILEGX_NUM_PIPELINE_ENCODINGS][TILEGX_MAX_OPERANDS];
+
+};
+
+extern const struct tilegx_opcode tilegx_opcodes[];
+
+/* Used for non-textual disassembly into structs. */
+struct tilegx_decoded_instruction
+{
+  const struct tilegx_opcode *opcode;
+  const struct tilegx_operand *operands[TILEGX_MAX_OPERANDS];
+  long long operand_values[TILEGX_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tilegx(tilegx_bundle_bits bits,
+                             unsigned long long pc,
+                             struct tilegx_decoded_instruction
+                             decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+
+#endif /* opcode_tilegx_h */
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
index 1dc71ea..9092ce8 100644
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -15,13 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <asm/backtrace.h>
-#include <asm/opcode-tile.h>
+#include <asm/tile-desc.h>
 #include <arch/abi.h>
 
 #ifdef __tilegx__
-#define tile_bundle_bits tilegx_bundle_bits
 #define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE
-#define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES
 #define tile_decoded_instruction tilegx_decoded_instruction
 #define tile_mnemonic tilegx_mnemonic
 #define parse_insn_tile parse_insn_tilegx
@@ -35,7 +33,18 @@
 #define OPCODE_STORE TILEGX_OPC_ST
 typedef long long bt_int_reg_t;
 #else
-#define OPCODE_STORE TILE_OPC_SW
+#define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE
+#define tile_decoded_instruction tilepro_decoded_instruction
+#define tile_mnemonic tilepro_mnemonic
+#define parse_insn_tile parse_insn_tilepro
+#define TILE_OPC_IRET TILEPRO_OPC_IRET
+#define TILE_OPC_ADDI TILEPRO_OPC_ADDI
+#define TILE_OPC_ADDLI TILEPRO_OPC_ADDLI
+#define TILE_OPC_INFO TILEPRO_OPC_INFO
+#define TILE_OPC_INFOL TILEPRO_OPC_INFOL
+#define TILE_OPC_JRP TILEPRO_OPC_JRP
+#define TILE_OPC_MOVE TILEPRO_OPC_MOVE
+#define OPCODE_STORE TILEPRO_OPC_SW
 typedef int bt_int_reg_t;
 #endif
 
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
index 28fa6ec..b90ab99 100644
--- a/arch/tile/kernel/module.c
+++ b/arch/tile/kernel/module.c
@@ -20,9 +20,9 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <asm/opcode-tile.h>
 #include <asm/pgtable.h>
 #include <asm/homecache.h>
+#include <arch/opcode.h>
 
 #ifdef __tilegx__
 # define Elf_Rela Elf64_Rela
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 4032ca8..b7a8795 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -25,9 +25,8 @@
 #include <linux/types.h>
 #include <linux/err.h>
 #include <asm/cacheflush.h>
-#include <asm/opcode-tile.h>
-#include <asm/opcode_constants.h>
 #include <arch/abi.h>
+#include <arch/opcode.h>
 
 #define signExtend17(val) sign_extend((val), 17)
 #define TILE_X1_MASK (0xffffffffULL << 31)
@@ -118,7 +117,7 @@
 	int val_reg, addr_reg, err, val;
 
 	/* Get address and value registers */
-	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+	if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) {
 		addr_reg = get_SrcA_Y2(bundle);
 		val_reg = get_SrcBDest_Y2(bundle);
 	} else if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
@@ -229,7 +228,7 @@
 	}
 	++unaligned_fixup_count;
 
-	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+	if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) {
 		/* Convert the Y2 instruction to a prefetch. */
 		bundle &= ~(create_SrcBDest_Y2(-1) |
 			    create_Opcode_Y2(-1));
@@ -389,7 +388,7 @@
 	state->branch_next_pc = 0;
 	state->update = 0;
 
-	if (!(bundle & TILE_BUNDLE_Y_ENCODING_MASK)) {
+	if (!(bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK)) {
 		/* two wide, check for control flow */
 		int opcode = get_Opcode_X1(bundle);
 
diff --git a/arch/tile/kernel/tile-desc_32.c b/arch/tile/kernel/tile-desc_32.c
index 7e31a12..dd7bd1d 100644
--- a/arch/tile/kernel/tile-desc_32.c
+++ b/arch/tile/kernel/tile-desc_32.c
@@ -1,3 +1,23 @@
+/* TILEPro opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
 /* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */
 #define BFD_RELOC(x) -1
 
@@ -6,1217 +26,1217 @@
 #define TREG_SN 56
 #define TREG_ZERO 63
 
-/* FIXME: Rename this. */
-#include <asm/opcode-tile.h>
-
 #include <linux/stddef.h>
+#include <asm/tile-desc.h>
 
-const struct tile_opcode tile_opcodes[395] =
+const struct tilepro_opcode tilepro_opcodes[395] =
 {
- { "bpt", TILE_OPC_BPT, 0x2, 0, TREG_ZERO, 0,
+ { "bpt", TILEPRO_OPC_BPT, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "info", TILE_OPC_INFO, 0xf, 1, TREG_ZERO, 1,
+  { "info", TILEPRO_OPC_INFO, 0xf, 1, TREG_ZERO, 1,
     { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } },
   },
-  { "infol", TILE_OPC_INFOL, 0x3, 1, TREG_ZERO, 1,
+  { "infol", TILEPRO_OPC_INFOL, 0x3, 1, TREG_ZERO, 1,
     { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "j", TILE_OPC_J, 0x2, 1, TREG_ZERO, 1,
+  { "j", TILEPRO_OPC_J, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jal", TILE_OPC_JAL, 0x2, 1, TREG_LR, 1,
+  { "jal", TILEPRO_OPC_JAL, 0x2, 1, TREG_LR, 1,
     { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } },
   },
-  { "move", TILE_OPC_MOVE, 0xf, 2, TREG_ZERO, 1,
+  { "move", TILEPRO_OPC_MOVE, 0xf, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 9, 10 }, { 11, 12 }, { 13, 14 }, { 0, } },
   },
-  { "move.sn", TILE_OPC_MOVE_SN, 0x3, 2, TREG_SN, 1,
+  { "move.sn", TILEPRO_OPC_MOVE_SN, 0x3, 2, TREG_SN, 1,
     { { 7, 8 }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "movei", TILE_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1,
+  { "movei", TILEPRO_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1,
     { { 7, 0 }, { 9, 1 }, { 11, 2 }, { 13, 3 }, { 0, } },
   },
-  { "movei.sn", TILE_OPC_MOVEI_SN, 0x3, 2, TREG_SN, 1,
+  { "movei.sn", TILEPRO_OPC_MOVEI_SN, 0x3, 2, TREG_SN, 1,
     { { 7, 0 }, { 9, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "moveli", TILE_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1,
+  { "moveli", TILEPRO_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1,
     { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "moveli.sn", TILE_OPC_MOVELI_SN, 0x3, 2, TREG_SN, 1,
+  { "moveli.sn", TILEPRO_OPC_MOVELI_SN, 0x3, 2, TREG_SN, 1,
     { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "movelis", TILE_OPC_MOVELIS, 0x3, 2, TREG_SN, 1,
+  { "movelis", TILEPRO_OPC_MOVELIS, 0x3, 2, TREG_SN, 1,
     { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "prefetch", TILE_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1,
+  { "prefetch", TILEPRO_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 15 } },
   },
-  { "raise", TILE_OPC_RAISE, 0x2, 0, TREG_ZERO, 1,
+  { "raise", TILEPRO_OPC_RAISE, 0x2, 0, TREG_ZERO, 1,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "add", TILE_OPC_ADD, 0xf, 3, TREG_ZERO, 1,
+  { "add", TILEPRO_OPC_ADD, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "add.sn", TILE_OPC_ADD_SN, 0x3, 3, TREG_SN, 1,
+  { "add.sn", TILEPRO_OPC_ADD_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addb", TILE_OPC_ADDB, 0x3, 3, TREG_ZERO, 1,
+  { "addb", TILEPRO_OPC_ADDB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addb.sn", TILE_OPC_ADDB_SN, 0x3, 3, TREG_SN, 1,
+  { "addb.sn", TILEPRO_OPC_ADDB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addbs_u", TILE_OPC_ADDBS_U, 0x3, 3, TREG_ZERO, 1,
+  { "addbs_u", TILEPRO_OPC_ADDBS_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addbs_u.sn", TILE_OPC_ADDBS_U_SN, 0x3, 3, TREG_SN, 1,
+  { "addbs_u.sn", TILEPRO_OPC_ADDBS_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addh", TILE_OPC_ADDH, 0x3, 3, TREG_ZERO, 1,
+  { "addh", TILEPRO_OPC_ADDH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addh.sn", TILE_OPC_ADDH_SN, 0x3, 3, TREG_SN, 1,
+  { "addh.sn", TILEPRO_OPC_ADDH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addhs", TILE_OPC_ADDHS, 0x3, 3, TREG_ZERO, 1,
+  { "addhs", TILEPRO_OPC_ADDHS, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addhs.sn", TILE_OPC_ADDHS_SN, 0x3, 3, TREG_SN, 1,
+  { "addhs.sn", TILEPRO_OPC_ADDHS_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addi", TILE_OPC_ADDI, 0xf, 3, TREG_ZERO, 1,
+  { "addi", TILEPRO_OPC_ADDI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "addi.sn", TILE_OPC_ADDI_SN, 0x3, 3, TREG_SN, 1,
+  { "addi.sn", TILEPRO_OPC_ADDI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addib", TILE_OPC_ADDIB, 0x3, 3, TREG_ZERO, 1,
+  { "addib", TILEPRO_OPC_ADDIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addib.sn", TILE_OPC_ADDIB_SN, 0x3, 3, TREG_SN, 1,
+  { "addib.sn", TILEPRO_OPC_ADDIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addih", TILE_OPC_ADDIH, 0x3, 3, TREG_ZERO, 1,
+  { "addih", TILEPRO_OPC_ADDIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addih.sn", TILE_OPC_ADDIH_SN, 0x3, 3, TREG_SN, 1,
+  { "addih.sn", TILEPRO_OPC_ADDIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addli", TILE_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1,
+  { "addli", TILEPRO_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addli.sn", TILE_OPC_ADDLI_SN, 0x3, 3, TREG_SN, 1,
+  { "addli.sn", TILEPRO_OPC_ADDLI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "addlis", TILE_OPC_ADDLIS, 0x3, 3, TREG_SN, 1,
+  { "addlis", TILEPRO_OPC_ADDLIS, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "adds", TILE_OPC_ADDS, 0x3, 3, TREG_ZERO, 1,
+  { "adds", TILEPRO_OPC_ADDS, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "adds.sn", TILE_OPC_ADDS_SN, 0x3, 3, TREG_SN, 1,
+  { "adds.sn", TILEPRO_OPC_ADDS_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "adiffb_u", TILE_OPC_ADIFFB_U, 0x1, 3, TREG_ZERO, 1,
+  { "adiffb_u", TILEPRO_OPC_ADIFFB_U, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "adiffb_u.sn", TILE_OPC_ADIFFB_U_SN, 0x1, 3, TREG_SN, 1,
+  { "adiffb_u.sn", TILEPRO_OPC_ADIFFB_U_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "adiffh", TILE_OPC_ADIFFH, 0x1, 3, TREG_ZERO, 1,
+  { "adiffh", TILEPRO_OPC_ADIFFH, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "adiffh.sn", TILE_OPC_ADIFFH_SN, 0x1, 3, TREG_SN, 1,
+  { "adiffh.sn", TILEPRO_OPC_ADIFFH_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "and", TILE_OPC_AND, 0xf, 3, TREG_ZERO, 1,
+  { "and", TILEPRO_OPC_AND, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "and.sn", TILE_OPC_AND_SN, 0x3, 3, TREG_SN, 1,
+  { "and.sn", TILEPRO_OPC_AND_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "andi", TILE_OPC_ANDI, 0xf, 3, TREG_ZERO, 1,
+  { "andi", TILEPRO_OPC_ANDI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "andi.sn", TILE_OPC_ANDI_SN, 0x3, 3, TREG_SN, 1,
+  { "andi.sn", TILEPRO_OPC_ANDI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "auli", TILE_OPC_AULI, 0x3, 3, TREG_ZERO, 1,
+  { "auli", TILEPRO_OPC_AULI, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
   },
-  { "avgb_u", TILE_OPC_AVGB_U, 0x1, 3, TREG_ZERO, 1,
+  { "avgb_u", TILEPRO_OPC_AVGB_U, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "avgb_u.sn", TILE_OPC_AVGB_U_SN, 0x1, 3, TREG_SN, 1,
+  { "avgb_u.sn", TILEPRO_OPC_AVGB_U_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "avgh", TILE_OPC_AVGH, 0x1, 3, TREG_ZERO, 1,
+  { "avgh", TILEPRO_OPC_AVGH, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "avgh.sn", TILE_OPC_AVGH_SN, 0x1, 3, TREG_SN, 1,
+  { "avgh.sn", TILEPRO_OPC_AVGH_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbns", TILE_OPC_BBNS, 0x2, 2, TREG_ZERO, 1,
+  { "bbns", TILEPRO_OPC_BBNS, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbns.sn", TILE_OPC_BBNS_SN, 0x2, 2, TREG_SN, 1,
+  { "bbns.sn", TILEPRO_OPC_BBNS_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbnst", TILE_OPC_BBNST, 0x2, 2, TREG_ZERO, 1,
+  { "bbnst", TILEPRO_OPC_BBNST, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbnst.sn", TILE_OPC_BBNST_SN, 0x2, 2, TREG_SN, 1,
+  { "bbnst.sn", TILEPRO_OPC_BBNST_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbs", TILE_OPC_BBS, 0x2, 2, TREG_ZERO, 1,
+  { "bbs", TILEPRO_OPC_BBS, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbs.sn", TILE_OPC_BBS_SN, 0x2, 2, TREG_SN, 1,
+  { "bbs.sn", TILEPRO_OPC_BBS_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbst", TILE_OPC_BBST, 0x2, 2, TREG_ZERO, 1,
+  { "bbst", TILEPRO_OPC_BBST, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bbst.sn", TILE_OPC_BBST_SN, 0x2, 2, TREG_SN, 1,
+  { "bbst.sn", TILEPRO_OPC_BBST_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgez", TILE_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1,
+  { "bgez", TILEPRO_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgez.sn", TILE_OPC_BGEZ_SN, 0x2, 2, TREG_SN, 1,
+  { "bgez.sn", TILEPRO_OPC_BGEZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgezt", TILE_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1,
+  { "bgezt", TILEPRO_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgezt.sn", TILE_OPC_BGEZT_SN, 0x2, 2, TREG_SN, 1,
+  { "bgezt.sn", TILEPRO_OPC_BGEZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgz", TILE_OPC_BGZ, 0x2, 2, TREG_ZERO, 1,
+  { "bgz", TILEPRO_OPC_BGZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgz.sn", TILE_OPC_BGZ_SN, 0x2, 2, TREG_SN, 1,
+  { "bgz.sn", TILEPRO_OPC_BGZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgzt", TILE_OPC_BGZT, 0x2, 2, TREG_ZERO, 1,
+  { "bgzt", TILEPRO_OPC_BGZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bgzt.sn", TILE_OPC_BGZT_SN, 0x2, 2, TREG_SN, 1,
+  { "bgzt.sn", TILEPRO_OPC_BGZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bitx", TILE_OPC_BITX, 0x5, 2, TREG_ZERO, 1,
+  { "bitx", TILEPRO_OPC_BITX, 0x5, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
   },
-  { "bitx.sn", TILE_OPC_BITX_SN, 0x1, 2, TREG_SN, 1,
+  { "bitx.sn", TILEPRO_OPC_BITX_SN, 0x1, 2, TREG_SN, 1,
     { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "blez", TILE_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1,
+  { "blez", TILEPRO_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blez.sn", TILE_OPC_BLEZ_SN, 0x2, 2, TREG_SN, 1,
+  { "blez.sn", TILEPRO_OPC_BLEZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blezt", TILE_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1,
+  { "blezt", TILEPRO_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blezt.sn", TILE_OPC_BLEZT_SN, 0x2, 2, TREG_SN, 1,
+  { "blezt.sn", TILEPRO_OPC_BLEZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blz", TILE_OPC_BLZ, 0x2, 2, TREG_ZERO, 1,
+  { "blz", TILEPRO_OPC_BLZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blz.sn", TILE_OPC_BLZ_SN, 0x2, 2, TREG_SN, 1,
+  { "blz.sn", TILEPRO_OPC_BLZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blzt", TILE_OPC_BLZT, 0x2, 2, TREG_ZERO, 1,
+  { "blzt", TILEPRO_OPC_BLZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "blzt.sn", TILE_OPC_BLZT_SN, 0x2, 2, TREG_SN, 1,
+  { "blzt.sn", TILEPRO_OPC_BLZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bnz", TILE_OPC_BNZ, 0x2, 2, TREG_ZERO, 1,
+  { "bnz", TILEPRO_OPC_BNZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bnz.sn", TILE_OPC_BNZ_SN, 0x2, 2, TREG_SN, 1,
+  { "bnz.sn", TILEPRO_OPC_BNZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bnzt", TILE_OPC_BNZT, 0x2, 2, TREG_ZERO, 1,
+  { "bnzt", TILEPRO_OPC_BNZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bnzt.sn", TILE_OPC_BNZT_SN, 0x2, 2, TREG_SN, 1,
+  { "bnzt.sn", TILEPRO_OPC_BNZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bytex", TILE_OPC_BYTEX, 0x5, 2, TREG_ZERO, 1,
+  { "bytex", TILEPRO_OPC_BYTEX, 0x5, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
   },
-  { "bytex.sn", TILE_OPC_BYTEX_SN, 0x1, 2, TREG_SN, 1,
+  { "bytex.sn", TILEPRO_OPC_BYTEX_SN, 0x1, 2, TREG_SN, 1,
     { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "bz", TILE_OPC_BZ, 0x2, 2, TREG_ZERO, 1,
+  { "bz", TILEPRO_OPC_BZ, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bz.sn", TILE_OPC_BZ_SN, 0x2, 2, TREG_SN, 1,
+  { "bz.sn", TILEPRO_OPC_BZ_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bzt", TILE_OPC_BZT, 0x2, 2, TREG_ZERO, 1,
+  { "bzt", TILEPRO_OPC_BZT, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "bzt.sn", TILE_OPC_BZT_SN, 0x2, 2, TREG_SN, 1,
+  { "bzt.sn", TILEPRO_OPC_BZT_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
   },
-  { "clz", TILE_OPC_CLZ, 0x5, 2, TREG_ZERO, 1,
+  { "clz", TILEPRO_OPC_CLZ, 0x5, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
   },
-  { "clz.sn", TILE_OPC_CLZ_SN, 0x1, 2, TREG_SN, 1,
+  { "clz.sn", TILEPRO_OPC_CLZ_SN, 0x1, 2, TREG_SN, 1,
     { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "crc32_32", TILE_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1,
+  { "crc32_32", TILEPRO_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "crc32_32.sn", TILE_OPC_CRC32_32_SN, 0x1, 3, TREG_SN, 1,
+  { "crc32_32.sn", TILEPRO_OPC_CRC32_32_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "crc32_8", TILE_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1,
+  { "crc32_8", TILEPRO_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "crc32_8.sn", TILE_OPC_CRC32_8_SN, 0x1, 3, TREG_SN, 1,
+  { "crc32_8.sn", TILEPRO_OPC_CRC32_8_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "ctz", TILE_OPC_CTZ, 0x5, 2, TREG_ZERO, 1,
+  { "ctz", TILEPRO_OPC_CTZ, 0x5, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
   },
-  { "ctz.sn", TILE_OPC_CTZ_SN, 0x1, 2, TREG_SN, 1,
+  { "ctz.sn", TILEPRO_OPC_CTZ_SN, 0x1, 2, TREG_SN, 1,
     { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "drain", TILE_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0,
+  { "drain", TILEPRO_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "dtlbpr", TILE_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1,
+  { "dtlbpr", TILEPRO_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "dword_align", TILE_OPC_DWORD_ALIGN, 0x1, 3, TREG_ZERO, 1,
+  { "dword_align", TILEPRO_OPC_DWORD_ALIGN, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "dword_align.sn", TILE_OPC_DWORD_ALIGN_SN, 0x1, 3, TREG_SN, 1,
+  { "dword_align.sn", TILEPRO_OPC_DWORD_ALIGN_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "finv", TILE_OPC_FINV, 0x2, 1, TREG_ZERO, 1,
+  { "finv", TILEPRO_OPC_FINV, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "flush", TILE_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1,
+  { "flush", TILEPRO_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "fnop", TILE_OPC_FNOP, 0xf, 0, TREG_ZERO, 1,
+  { "fnop", TILEPRO_OPC_FNOP, 0xf, 0, TREG_ZERO, 1,
     { {  }, {  }, {  }, {  }, { 0, } },
   },
-  { "icoh", TILE_OPC_ICOH, 0x2, 1, TREG_ZERO, 1,
+  { "icoh", TILEPRO_OPC_ICOH, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "ill", TILE_OPC_ILL, 0xa, 0, TREG_ZERO, 1,
+  { "ill", TILEPRO_OPC_ILL, 0xa, 0, TREG_ZERO, 1,
     { { 0, }, {  }, { 0, }, {  }, { 0, } },
   },
-  { "inthb", TILE_OPC_INTHB, 0x3, 3, TREG_ZERO, 1,
+  { "inthb", TILEPRO_OPC_INTHB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "inthb.sn", TILE_OPC_INTHB_SN, 0x3, 3, TREG_SN, 1,
+  { "inthb.sn", TILEPRO_OPC_INTHB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "inthh", TILE_OPC_INTHH, 0x3, 3, TREG_ZERO, 1,
+  { "inthh", TILEPRO_OPC_INTHH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "inthh.sn", TILE_OPC_INTHH_SN, 0x3, 3, TREG_SN, 1,
+  { "inthh.sn", TILEPRO_OPC_INTHH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "intlb", TILE_OPC_INTLB, 0x3, 3, TREG_ZERO, 1,
+  { "intlb", TILEPRO_OPC_INTLB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "intlb.sn", TILE_OPC_INTLB_SN, 0x3, 3, TREG_SN, 1,
+  { "intlb.sn", TILEPRO_OPC_INTLB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "intlh", TILE_OPC_INTLH, 0x3, 3, TREG_ZERO, 1,
+  { "intlh", TILEPRO_OPC_INTLH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "intlh.sn", TILE_OPC_INTLH_SN, 0x3, 3, TREG_SN, 1,
+  { "intlh.sn", TILEPRO_OPC_INTLH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "inv", TILE_OPC_INV, 0x2, 1, TREG_ZERO, 1,
+  { "inv", TILEPRO_OPC_INV, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "iret", TILE_OPC_IRET, 0x2, 0, TREG_ZERO, 1,
+  { "iret", TILEPRO_OPC_IRET, 0x2, 0, TREG_ZERO, 1,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "jalb", TILE_OPC_JALB, 0x2, 1, TREG_LR, 1,
+  { "jalb", TILEPRO_OPC_JALB, 0x2, 1, TREG_LR, 1,
     { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jalf", TILE_OPC_JALF, 0x2, 1, TREG_LR, 1,
+  { "jalf", TILEPRO_OPC_JALF, 0x2, 1, TREG_LR, 1,
     { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jalr", TILE_OPC_JALR, 0x2, 1, TREG_LR, 1,
+  { "jalr", TILEPRO_OPC_JALR, 0x2, 1, TREG_LR, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jalrp", TILE_OPC_JALRP, 0x2, 1, TREG_LR, 1,
+  { "jalrp", TILEPRO_OPC_JALRP, 0x2, 1, TREG_LR, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jb", TILE_OPC_JB, 0x2, 1, TREG_ZERO, 1,
+  { "jb", TILEPRO_OPC_JB, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jf", TILE_OPC_JF, 0x2, 1, TREG_ZERO, 1,
+  { "jf", TILEPRO_OPC_JF, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jr", TILE_OPC_JR, 0x2, 1, TREG_ZERO, 1,
+  { "jr", TILEPRO_OPC_JR, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "jrp", TILE_OPC_JRP, 0x2, 1, TREG_ZERO, 1,
+  { "jrp", TILEPRO_OPC_JRP, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lb", TILE_OPC_LB, 0x12, 2, TREG_ZERO, 1,
+  { "lb", TILEPRO_OPC_LB, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
   },
-  { "lb.sn", TILE_OPC_LB_SN, 0x2, 2, TREG_SN, 1,
+  { "lb.sn", TILEPRO_OPC_LB_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lb_u", TILE_OPC_LB_U, 0x12, 2, TREG_ZERO, 1,
+  { "lb_u", TILEPRO_OPC_LB_U, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
   },
-  { "lb_u.sn", TILE_OPC_LB_U_SN, 0x2, 2, TREG_SN, 1,
+  { "lb_u.sn", TILEPRO_OPC_LB_U_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lbadd", TILE_OPC_LBADD, 0x2, 3, TREG_ZERO, 1,
+  { "lbadd", TILEPRO_OPC_LBADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lbadd.sn", TILE_OPC_LBADD_SN, 0x2, 3, TREG_SN, 1,
+  { "lbadd.sn", TILEPRO_OPC_LBADD_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lbadd_u", TILE_OPC_LBADD_U, 0x2, 3, TREG_ZERO, 1,
+  { "lbadd_u", TILEPRO_OPC_LBADD_U, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lbadd_u.sn", TILE_OPC_LBADD_U_SN, 0x2, 3, TREG_SN, 1,
+  { "lbadd_u.sn", TILEPRO_OPC_LBADD_U_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lh", TILE_OPC_LH, 0x12, 2, TREG_ZERO, 1,
+  { "lh", TILEPRO_OPC_LH, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
   },
-  { "lh.sn", TILE_OPC_LH_SN, 0x2, 2, TREG_SN, 1,
+  { "lh.sn", TILEPRO_OPC_LH_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lh_u", TILE_OPC_LH_U, 0x12, 2, TREG_ZERO, 1,
+  { "lh_u", TILEPRO_OPC_LH_U, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
   },
-  { "lh_u.sn", TILE_OPC_LH_U_SN, 0x2, 2, TREG_SN, 1,
+  { "lh_u.sn", TILEPRO_OPC_LH_U_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lhadd", TILE_OPC_LHADD, 0x2, 3, TREG_ZERO, 1,
+  { "lhadd", TILEPRO_OPC_LHADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lhadd.sn", TILE_OPC_LHADD_SN, 0x2, 3, TREG_SN, 1,
+  { "lhadd.sn", TILEPRO_OPC_LHADD_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lhadd_u", TILE_OPC_LHADD_U, 0x2, 3, TREG_ZERO, 1,
+  { "lhadd_u", TILEPRO_OPC_LHADD_U, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lhadd_u.sn", TILE_OPC_LHADD_U_SN, 0x2, 3, TREG_SN, 1,
+  { "lhadd_u.sn", TILEPRO_OPC_LHADD_U_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lnk", TILE_OPC_LNK, 0x2, 1, TREG_ZERO, 1,
+  { "lnk", TILEPRO_OPC_LNK, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lnk.sn", TILE_OPC_LNK_SN, 0x2, 1, TREG_SN, 1,
+  { "lnk.sn", TILEPRO_OPC_LNK_SN, 0x2, 1, TREG_SN, 1,
     { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lw", TILE_OPC_LW, 0x12, 2, TREG_ZERO, 1,
+  { "lw", TILEPRO_OPC_LW, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
   },
-  { "lw.sn", TILE_OPC_LW_SN, 0x2, 2, TREG_SN, 1,
+  { "lw.sn", TILEPRO_OPC_LW_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lw_na", TILE_OPC_LW_NA, 0x2, 2, TREG_ZERO, 1,
+  { "lw_na", TILEPRO_OPC_LW_NA, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lw_na.sn", TILE_OPC_LW_NA_SN, 0x2, 2, TREG_SN, 1,
+  { "lw_na.sn", TILEPRO_OPC_LW_NA_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lwadd", TILE_OPC_LWADD, 0x2, 3, TREG_ZERO, 1,
+  { "lwadd", TILEPRO_OPC_LWADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lwadd.sn", TILE_OPC_LWADD_SN, 0x2, 3, TREG_SN, 1,
+  { "lwadd.sn", TILEPRO_OPC_LWADD_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lwadd_na", TILE_OPC_LWADD_NA, 0x2, 3, TREG_ZERO, 1,
+  { "lwadd_na", TILEPRO_OPC_LWADD_NA, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "lwadd_na.sn", TILE_OPC_LWADD_NA_SN, 0x2, 3, TREG_SN, 1,
+  { "lwadd_na.sn", TILEPRO_OPC_LWADD_NA_SN, 0x2, 3, TREG_SN, 1,
     { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxb_u", TILE_OPC_MAXB_U, 0x3, 3, TREG_ZERO, 1,
+  { "maxb_u", TILEPRO_OPC_MAXB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxb_u.sn", TILE_OPC_MAXB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "maxb_u.sn", TILEPRO_OPC_MAXB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxh", TILE_OPC_MAXH, 0x3, 3, TREG_ZERO, 1,
+  { "maxh", TILEPRO_OPC_MAXH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxh.sn", TILE_OPC_MAXH_SN, 0x3, 3, TREG_SN, 1,
+  { "maxh.sn", TILEPRO_OPC_MAXH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxib_u", TILE_OPC_MAXIB_U, 0x3, 3, TREG_ZERO, 1,
+  { "maxib_u", TILEPRO_OPC_MAXIB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxib_u.sn", TILE_OPC_MAXIB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "maxib_u.sn", TILEPRO_OPC_MAXIB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxih", TILE_OPC_MAXIH, 0x3, 3, TREG_ZERO, 1,
+  { "maxih", TILEPRO_OPC_MAXIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "maxih.sn", TILE_OPC_MAXIH_SN, 0x3, 3, TREG_SN, 1,
+  { "maxih.sn", TILEPRO_OPC_MAXIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mf", TILE_OPC_MF, 0x2, 0, TREG_ZERO, 1,
+  { "mf", TILEPRO_OPC_MF, 0x2, 0, TREG_ZERO, 1,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "mfspr", TILE_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1,
+  { "mfspr", TILEPRO_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 25 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minb_u", TILE_OPC_MINB_U, 0x3, 3, TREG_ZERO, 1,
+  { "minb_u", TILEPRO_OPC_MINB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minb_u.sn", TILE_OPC_MINB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "minb_u.sn", TILEPRO_OPC_MINB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minh", TILE_OPC_MINH, 0x3, 3, TREG_ZERO, 1,
+  { "minh", TILEPRO_OPC_MINH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minh.sn", TILE_OPC_MINH_SN, 0x3, 3, TREG_SN, 1,
+  { "minh.sn", TILEPRO_OPC_MINH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minib_u", TILE_OPC_MINIB_U, 0x3, 3, TREG_ZERO, 1,
+  { "minib_u", TILEPRO_OPC_MINIB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minib_u.sn", TILE_OPC_MINIB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "minib_u.sn", TILEPRO_OPC_MINIB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minih", TILE_OPC_MINIH, 0x3, 3, TREG_ZERO, 1,
+  { "minih", TILEPRO_OPC_MINIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "minih.sn", TILE_OPC_MINIH_SN, 0x3, 3, TREG_SN, 1,
+  { "minih.sn", TILEPRO_OPC_MINIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mm", TILE_OPC_MM, 0x3, 5, TREG_ZERO, 1,
+  { "mm", TILEPRO_OPC_MM, 0x3, 5, TREG_ZERO, 1,
     { { 7, 8, 16, 26, 27 }, { 9, 10, 17, 28, 29 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mnz", TILE_OPC_MNZ, 0xf, 3, TREG_ZERO, 1,
+  { "mnz", TILEPRO_OPC_MNZ, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "mnz.sn", TILE_OPC_MNZ_SN, 0x3, 3, TREG_SN, 1,
+  { "mnz.sn", TILEPRO_OPC_MNZ_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mnzb", TILE_OPC_MNZB, 0x3, 3, TREG_ZERO, 1,
+  { "mnzb", TILEPRO_OPC_MNZB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mnzb.sn", TILE_OPC_MNZB_SN, 0x3, 3, TREG_SN, 1,
+  { "mnzb.sn", TILEPRO_OPC_MNZB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mnzh", TILE_OPC_MNZH, 0x3, 3, TREG_ZERO, 1,
+  { "mnzh", TILEPRO_OPC_MNZH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mnzh.sn", TILE_OPC_MNZH_SN, 0x3, 3, TREG_SN, 1,
+  { "mnzh.sn", TILEPRO_OPC_MNZH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mtspr", TILE_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1,
+  { "mtspr", TILEPRO_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 30, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhh_ss", TILE_OPC_MULHH_SS, 0x5, 3, TREG_ZERO, 1,
+  { "mulhh_ss", TILEPRO_OPC_MULHH_SS, 0x5, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulhh_ss.sn", TILE_OPC_MULHH_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhh_ss.sn", TILEPRO_OPC_MULHH_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhh_su", TILE_OPC_MULHH_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhh_su", TILEPRO_OPC_MULHH_SU, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhh_su.sn", TILE_OPC_MULHH_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhh_su.sn", TILEPRO_OPC_MULHH_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhh_uu", TILE_OPC_MULHH_UU, 0x5, 3, TREG_ZERO, 1,
+  { "mulhh_uu", TILEPRO_OPC_MULHH_UU, 0x5, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulhh_uu.sn", TILE_OPC_MULHH_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhh_uu.sn", TILEPRO_OPC_MULHH_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhha_ss", TILE_OPC_MULHHA_SS, 0x5, 3, TREG_ZERO, 1,
+  { "mulhha_ss", TILEPRO_OPC_MULHHA_SS, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulhha_ss.sn", TILE_OPC_MULHHA_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhha_ss.sn", TILEPRO_OPC_MULHHA_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhha_su", TILE_OPC_MULHHA_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhha_su", TILEPRO_OPC_MULHHA_SU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhha_su.sn", TILE_OPC_MULHHA_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhha_su.sn", TILEPRO_OPC_MULHHA_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhha_uu", TILE_OPC_MULHHA_UU, 0x5, 3, TREG_ZERO, 1,
+  { "mulhha_uu", TILEPRO_OPC_MULHHA_UU, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulhha_uu.sn", TILE_OPC_MULHHA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhha_uu.sn", TILEPRO_OPC_MULHHA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhhsa_uu", TILE_OPC_MULHHSA_UU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhhsa_uu", TILEPRO_OPC_MULHHSA_UU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhhsa_uu.sn", TILE_OPC_MULHHSA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhhsa_uu.sn", TILEPRO_OPC_MULHHSA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_ss", TILE_OPC_MULHL_SS, 0x1, 3, TREG_ZERO, 1,
+  { "mulhl_ss", TILEPRO_OPC_MULHL_SS, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_ss.sn", TILE_OPC_MULHL_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhl_ss.sn", TILEPRO_OPC_MULHL_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_su", TILE_OPC_MULHL_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhl_su", TILEPRO_OPC_MULHL_SU, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_su.sn", TILE_OPC_MULHL_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhl_su.sn", TILEPRO_OPC_MULHL_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_us", TILE_OPC_MULHL_US, 0x1, 3, TREG_ZERO, 1,
+  { "mulhl_us", TILEPRO_OPC_MULHL_US, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_us.sn", TILE_OPC_MULHL_US_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhl_us.sn", TILEPRO_OPC_MULHL_US_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_uu", TILE_OPC_MULHL_UU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhl_uu", TILEPRO_OPC_MULHL_UU, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhl_uu.sn", TILE_OPC_MULHL_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhl_uu.sn", TILEPRO_OPC_MULHL_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_ss", TILE_OPC_MULHLA_SS, 0x1, 3, TREG_ZERO, 1,
+  { "mulhla_ss", TILEPRO_OPC_MULHLA_SS, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_ss.sn", TILE_OPC_MULHLA_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhla_ss.sn", TILEPRO_OPC_MULHLA_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_su", TILE_OPC_MULHLA_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhla_su", TILEPRO_OPC_MULHLA_SU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_su.sn", TILE_OPC_MULHLA_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhla_su.sn", TILEPRO_OPC_MULHLA_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_us", TILE_OPC_MULHLA_US, 0x1, 3, TREG_ZERO, 1,
+  { "mulhla_us", TILEPRO_OPC_MULHLA_US, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_us.sn", TILE_OPC_MULHLA_US_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhla_us.sn", TILEPRO_OPC_MULHLA_US_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_uu", TILE_OPC_MULHLA_UU, 0x1, 3, TREG_ZERO, 1,
+  { "mulhla_uu", TILEPRO_OPC_MULHLA_UU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhla_uu.sn", TILE_OPC_MULHLA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhla_uu.sn", TILEPRO_OPC_MULHLA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulhlsa_uu", TILE_OPC_MULHLSA_UU, 0x5, 3, TREG_ZERO, 1,
+  { "mulhlsa_uu", TILEPRO_OPC_MULHLSA_UU, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulhlsa_uu.sn", TILE_OPC_MULHLSA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulhlsa_uu.sn", TILEPRO_OPC_MULHLSA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulll_ss", TILE_OPC_MULLL_SS, 0x5, 3, TREG_ZERO, 1,
+  { "mulll_ss", TILEPRO_OPC_MULLL_SS, 0x5, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulll_ss.sn", TILE_OPC_MULLL_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mulll_ss.sn", TILEPRO_OPC_MULLL_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulll_su", TILE_OPC_MULLL_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mulll_su", TILEPRO_OPC_MULLL_SU, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulll_su.sn", TILE_OPC_MULLL_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulll_su.sn", TILEPRO_OPC_MULLL_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulll_uu", TILE_OPC_MULLL_UU, 0x5, 3, TREG_ZERO, 1,
+  { "mulll_uu", TILEPRO_OPC_MULLL_UU, 0x5, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mulll_uu.sn", TILE_OPC_MULLL_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulll_uu.sn", TILEPRO_OPC_MULLL_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mullla_ss", TILE_OPC_MULLLA_SS, 0x5, 3, TREG_ZERO, 1,
+  { "mullla_ss", TILEPRO_OPC_MULLLA_SS, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mullla_ss.sn", TILE_OPC_MULLLA_SS_SN, 0x1, 3, TREG_SN, 1,
+  { "mullla_ss.sn", TILEPRO_OPC_MULLLA_SS_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mullla_su", TILE_OPC_MULLLA_SU, 0x1, 3, TREG_ZERO, 1,
+  { "mullla_su", TILEPRO_OPC_MULLLA_SU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mullla_su.sn", TILE_OPC_MULLLA_SU_SN, 0x1, 3, TREG_SN, 1,
+  { "mullla_su.sn", TILEPRO_OPC_MULLLA_SU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mullla_uu", TILE_OPC_MULLLA_UU, 0x5, 3, TREG_ZERO, 1,
+  { "mullla_uu", TILEPRO_OPC_MULLLA_UU, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mullla_uu.sn", TILE_OPC_MULLLA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mullla_uu.sn", TILEPRO_OPC_MULLLA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulllsa_uu", TILE_OPC_MULLLSA_UU, 0x1, 3, TREG_ZERO, 1,
+  { "mulllsa_uu", TILEPRO_OPC_MULLLSA_UU, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mulllsa_uu.sn", TILE_OPC_MULLLSA_UU_SN, 0x1, 3, TREG_SN, 1,
+  { "mulllsa_uu.sn", TILEPRO_OPC_MULLLSA_UU_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mvnz", TILE_OPC_MVNZ, 0x5, 3, TREG_ZERO, 1,
+  { "mvnz", TILEPRO_OPC_MVNZ, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mvnz.sn", TILE_OPC_MVNZ_SN, 0x1, 3, TREG_SN, 1,
+  { "mvnz.sn", TILEPRO_OPC_MVNZ_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mvz", TILE_OPC_MVZ, 0x5, 3, TREG_ZERO, 1,
+  { "mvz", TILEPRO_OPC_MVZ, 0x5, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
   },
-  { "mvz.sn", TILE_OPC_MVZ_SN, 0x1, 3, TREG_SN, 1,
+  { "mvz.sn", TILEPRO_OPC_MVZ_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "mz", TILE_OPC_MZ, 0xf, 3, TREG_ZERO, 1,
+  { "mz", TILEPRO_OPC_MZ, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "mz.sn", TILE_OPC_MZ_SN, 0x3, 3, TREG_SN, 1,
+  { "mz.sn", TILEPRO_OPC_MZ_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mzb", TILE_OPC_MZB, 0x3, 3, TREG_ZERO, 1,
+  { "mzb", TILEPRO_OPC_MZB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mzb.sn", TILE_OPC_MZB_SN, 0x3, 3, TREG_SN, 1,
+  { "mzb.sn", TILEPRO_OPC_MZB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mzh", TILE_OPC_MZH, 0x3, 3, TREG_ZERO, 1,
+  { "mzh", TILEPRO_OPC_MZH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "mzh.sn", TILE_OPC_MZH_SN, 0x3, 3, TREG_SN, 1,
+  { "mzh.sn", TILEPRO_OPC_MZH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "nap", TILE_OPC_NAP, 0x2, 0, TREG_ZERO, 0,
+  { "nap", TILEPRO_OPC_NAP, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "nop", TILE_OPC_NOP, 0xf, 0, TREG_ZERO, 1,
+  { "nop", TILEPRO_OPC_NOP, 0xf, 0, TREG_ZERO, 1,
     { {  }, {  }, {  }, {  }, { 0, } },
   },
-  { "nor", TILE_OPC_NOR, 0xf, 3, TREG_ZERO, 1,
+  { "nor", TILEPRO_OPC_NOR, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "nor.sn", TILE_OPC_NOR_SN, 0x3, 3, TREG_SN, 1,
+  { "nor.sn", TILEPRO_OPC_NOR_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "or", TILE_OPC_OR, 0xf, 3, TREG_ZERO, 1,
+  { "or", TILEPRO_OPC_OR, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "or.sn", TILE_OPC_OR_SN, 0x3, 3, TREG_SN, 1,
+  { "or.sn", TILEPRO_OPC_OR_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "ori", TILE_OPC_ORI, 0xf, 3, TREG_ZERO, 1,
+  { "ori", TILEPRO_OPC_ORI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "ori.sn", TILE_OPC_ORI_SN, 0x3, 3, TREG_SN, 1,
+  { "ori.sn", TILEPRO_OPC_ORI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packbs_u", TILE_OPC_PACKBS_U, 0x3, 3, TREG_ZERO, 1,
+  { "packbs_u", TILEPRO_OPC_PACKBS_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packbs_u.sn", TILE_OPC_PACKBS_U_SN, 0x3, 3, TREG_SN, 1,
+  { "packbs_u.sn", TILEPRO_OPC_PACKBS_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packhb", TILE_OPC_PACKHB, 0x3, 3, TREG_ZERO, 1,
+  { "packhb", TILEPRO_OPC_PACKHB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packhb.sn", TILE_OPC_PACKHB_SN, 0x3, 3, TREG_SN, 1,
+  { "packhb.sn", TILEPRO_OPC_PACKHB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packhs", TILE_OPC_PACKHS, 0x3, 3, TREG_ZERO, 1,
+  { "packhs", TILEPRO_OPC_PACKHS, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packhs.sn", TILE_OPC_PACKHS_SN, 0x3, 3, TREG_SN, 1,
+  { "packhs.sn", TILEPRO_OPC_PACKHS_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packlb", TILE_OPC_PACKLB, 0x3, 3, TREG_ZERO, 1,
+  { "packlb", TILEPRO_OPC_PACKLB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "packlb.sn", TILE_OPC_PACKLB_SN, 0x3, 3, TREG_SN, 1,
+  { "packlb.sn", TILEPRO_OPC_PACKLB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "pcnt", TILE_OPC_PCNT, 0x5, 2, TREG_ZERO, 1,
+  { "pcnt", TILEPRO_OPC_PCNT, 0x5, 2, TREG_ZERO, 1,
     { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
   },
-  { "pcnt.sn", TILE_OPC_PCNT_SN, 0x1, 2, TREG_SN, 1,
+  { "pcnt.sn", TILEPRO_OPC_PCNT_SN, 0x1, 2, TREG_SN, 1,
     { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "rl", TILE_OPC_RL, 0xf, 3, TREG_ZERO, 1,
+  { "rl", TILEPRO_OPC_RL, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "rl.sn", TILE_OPC_RL_SN, 0x3, 3, TREG_SN, 1,
+  { "rl.sn", TILEPRO_OPC_RL_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "rli", TILE_OPC_RLI, 0xf, 3, TREG_ZERO, 1,
+  { "rli", TILEPRO_OPC_RLI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
   },
-  { "rli.sn", TILE_OPC_RLI_SN, 0x3, 3, TREG_SN, 1,
+  { "rli.sn", TILEPRO_OPC_RLI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "s1a", TILE_OPC_S1A, 0xf, 3, TREG_ZERO, 1,
+  { "s1a", TILEPRO_OPC_S1A, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "s1a.sn", TILE_OPC_S1A_SN, 0x3, 3, TREG_SN, 1,
+  { "s1a.sn", TILEPRO_OPC_S1A_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "s2a", TILE_OPC_S2A, 0xf, 3, TREG_ZERO, 1,
+  { "s2a", TILEPRO_OPC_S2A, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "s2a.sn", TILE_OPC_S2A_SN, 0x3, 3, TREG_SN, 1,
+  { "s2a.sn", TILEPRO_OPC_S2A_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "s3a", TILE_OPC_S3A, 0xf, 3, TREG_ZERO, 1,
+  { "s3a", TILEPRO_OPC_S3A, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "s3a.sn", TILE_OPC_S3A_SN, 0x3, 3, TREG_SN, 1,
+  { "s3a.sn", TILEPRO_OPC_S3A_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadab_u", TILE_OPC_SADAB_U, 0x1, 3, TREG_ZERO, 1,
+  { "sadab_u", TILEPRO_OPC_SADAB_U, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadab_u.sn", TILE_OPC_SADAB_U_SN, 0x1, 3, TREG_SN, 1,
+  { "sadab_u.sn", TILEPRO_OPC_SADAB_U_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadah", TILE_OPC_SADAH, 0x1, 3, TREG_ZERO, 1,
+  { "sadah", TILEPRO_OPC_SADAH, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadah.sn", TILE_OPC_SADAH_SN, 0x1, 3, TREG_SN, 1,
+  { "sadah.sn", TILEPRO_OPC_SADAH_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadah_u", TILE_OPC_SADAH_U, 0x1, 3, TREG_ZERO, 1,
+  { "sadah_u", TILEPRO_OPC_SADAH_U, 0x1, 3, TREG_ZERO, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadah_u.sn", TILE_OPC_SADAH_U_SN, 0x1, 3, TREG_SN, 1,
+  { "sadah_u.sn", TILEPRO_OPC_SADAH_U_SN, 0x1, 3, TREG_SN, 1,
     { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadb_u", TILE_OPC_SADB_U, 0x1, 3, TREG_ZERO, 1,
+  { "sadb_u", TILEPRO_OPC_SADB_U, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadb_u.sn", TILE_OPC_SADB_U_SN, 0x1, 3, TREG_SN, 1,
+  { "sadb_u.sn", TILEPRO_OPC_SADB_U_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadh", TILE_OPC_SADH, 0x1, 3, TREG_ZERO, 1,
+  { "sadh", TILEPRO_OPC_SADH, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadh.sn", TILE_OPC_SADH_SN, 0x1, 3, TREG_SN, 1,
+  { "sadh.sn", TILEPRO_OPC_SADH_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadh_u", TILE_OPC_SADH_U, 0x1, 3, TREG_ZERO, 1,
+  { "sadh_u", TILEPRO_OPC_SADH_U, 0x1, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sadh_u.sn", TILE_OPC_SADH_U_SN, 0x1, 3, TREG_SN, 1,
+  { "sadh_u.sn", TILEPRO_OPC_SADH_U_SN, 0x1, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "sb", TILE_OPC_SB, 0x12, 2, TREG_ZERO, 1,
+  { "sb", TILEPRO_OPC_SB, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
   },
-  { "sbadd", TILE_OPC_SBADD, 0x2, 3, TREG_ZERO, 1,
+  { "sbadd", TILEPRO_OPC_SBADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seq", TILE_OPC_SEQ, 0xf, 3, TREG_ZERO, 1,
+  { "seq", TILEPRO_OPC_SEQ, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "seq.sn", TILE_OPC_SEQ_SN, 0x3, 3, TREG_SN, 1,
+  { "seq.sn", TILEPRO_OPC_SEQ_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqb", TILE_OPC_SEQB, 0x3, 3, TREG_ZERO, 1,
+  { "seqb", TILEPRO_OPC_SEQB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqb.sn", TILE_OPC_SEQB_SN, 0x3, 3, TREG_SN, 1,
+  { "seqb.sn", TILEPRO_OPC_SEQB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqh", TILE_OPC_SEQH, 0x3, 3, TREG_ZERO, 1,
+  { "seqh", TILEPRO_OPC_SEQH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqh.sn", TILE_OPC_SEQH_SN, 0x3, 3, TREG_SN, 1,
+  { "seqh.sn", TILEPRO_OPC_SEQH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqi", TILE_OPC_SEQI, 0xf, 3, TREG_ZERO, 1,
+  { "seqi", TILEPRO_OPC_SEQI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "seqi.sn", TILE_OPC_SEQI_SN, 0x3, 3, TREG_SN, 1,
+  { "seqi.sn", TILEPRO_OPC_SEQI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqib", TILE_OPC_SEQIB, 0x3, 3, TREG_ZERO, 1,
+  { "seqib", TILEPRO_OPC_SEQIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqib.sn", TILE_OPC_SEQIB_SN, 0x3, 3, TREG_SN, 1,
+  { "seqib.sn", TILEPRO_OPC_SEQIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqih", TILE_OPC_SEQIH, 0x3, 3, TREG_ZERO, 1,
+  { "seqih", TILEPRO_OPC_SEQIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "seqih.sn", TILE_OPC_SEQIH_SN, 0x3, 3, TREG_SN, 1,
+  { "seqih.sn", TILEPRO_OPC_SEQIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sh", TILE_OPC_SH, 0x12, 2, TREG_ZERO, 1,
+  { "sh", TILEPRO_OPC_SH, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
   },
-  { "shadd", TILE_OPC_SHADD, 0x2, 3, TREG_ZERO, 1,
+  { "shadd", TILEPRO_OPC_SHADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shl", TILE_OPC_SHL, 0xf, 3, TREG_ZERO, 1,
+  { "shl", TILEPRO_OPC_SHL, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "shl.sn", TILE_OPC_SHL_SN, 0x3, 3, TREG_SN, 1,
+  { "shl.sn", TILEPRO_OPC_SHL_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlb", TILE_OPC_SHLB, 0x3, 3, TREG_ZERO, 1,
+  { "shlb", TILEPRO_OPC_SHLB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlb.sn", TILE_OPC_SHLB_SN, 0x3, 3, TREG_SN, 1,
+  { "shlb.sn", TILEPRO_OPC_SHLB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlh", TILE_OPC_SHLH, 0x3, 3, TREG_ZERO, 1,
+  { "shlh", TILEPRO_OPC_SHLH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlh.sn", TILE_OPC_SHLH_SN, 0x3, 3, TREG_SN, 1,
+  { "shlh.sn", TILEPRO_OPC_SHLH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shli", TILE_OPC_SHLI, 0xf, 3, TREG_ZERO, 1,
+  { "shli", TILEPRO_OPC_SHLI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
   },
-  { "shli.sn", TILE_OPC_SHLI_SN, 0x3, 3, TREG_SN, 1,
+  { "shli.sn", TILEPRO_OPC_SHLI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlib", TILE_OPC_SHLIB, 0x3, 3, TREG_ZERO, 1,
+  { "shlib", TILEPRO_OPC_SHLIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlib.sn", TILE_OPC_SHLIB_SN, 0x3, 3, TREG_SN, 1,
+  { "shlib.sn", TILEPRO_OPC_SHLIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlih", TILE_OPC_SHLIH, 0x3, 3, TREG_ZERO, 1,
+  { "shlih", TILEPRO_OPC_SHLIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shlih.sn", TILE_OPC_SHLIH_SN, 0x3, 3, TREG_SN, 1,
+  { "shlih.sn", TILEPRO_OPC_SHLIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shr", TILE_OPC_SHR, 0xf, 3, TREG_ZERO, 1,
+  { "shr", TILEPRO_OPC_SHR, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "shr.sn", TILE_OPC_SHR_SN, 0x3, 3, TREG_SN, 1,
+  { "shr.sn", TILEPRO_OPC_SHR_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrb", TILE_OPC_SHRB, 0x3, 3, TREG_ZERO, 1,
+  { "shrb", TILEPRO_OPC_SHRB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrb.sn", TILE_OPC_SHRB_SN, 0x3, 3, TREG_SN, 1,
+  { "shrb.sn", TILEPRO_OPC_SHRB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrh", TILE_OPC_SHRH, 0x3, 3, TREG_ZERO, 1,
+  { "shrh", TILEPRO_OPC_SHRH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrh.sn", TILE_OPC_SHRH_SN, 0x3, 3, TREG_SN, 1,
+  { "shrh.sn", TILEPRO_OPC_SHRH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shri", TILE_OPC_SHRI, 0xf, 3, TREG_ZERO, 1,
+  { "shri", TILEPRO_OPC_SHRI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
   },
-  { "shri.sn", TILE_OPC_SHRI_SN, 0x3, 3, TREG_SN, 1,
+  { "shri.sn", TILEPRO_OPC_SHRI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrib", TILE_OPC_SHRIB, 0x3, 3, TREG_ZERO, 1,
+  { "shrib", TILEPRO_OPC_SHRIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrib.sn", TILE_OPC_SHRIB_SN, 0x3, 3, TREG_SN, 1,
+  { "shrib.sn", TILEPRO_OPC_SHRIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrih", TILE_OPC_SHRIH, 0x3, 3, TREG_ZERO, 1,
+  { "shrih", TILEPRO_OPC_SHRIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "shrih.sn", TILE_OPC_SHRIH_SN, 0x3, 3, TREG_SN, 1,
+  { "shrih.sn", TILEPRO_OPC_SHRIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slt", TILE_OPC_SLT, 0xf, 3, TREG_ZERO, 1,
+  { "slt", TILEPRO_OPC_SLT, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "slt.sn", TILE_OPC_SLT_SN, 0x3, 3, TREG_SN, 1,
+  { "slt.sn", TILEPRO_OPC_SLT_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slt_u", TILE_OPC_SLT_U, 0xf, 3, TREG_ZERO, 1,
+  { "slt_u", TILEPRO_OPC_SLT_U, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "slt_u.sn", TILE_OPC_SLT_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slt_u.sn", TILEPRO_OPC_SLT_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltb", TILE_OPC_SLTB, 0x3, 3, TREG_ZERO, 1,
+  { "sltb", TILEPRO_OPC_SLTB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltb.sn", TILE_OPC_SLTB_SN, 0x3, 3, TREG_SN, 1,
+  { "sltb.sn", TILEPRO_OPC_SLTB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltb_u", TILE_OPC_SLTB_U, 0x3, 3, TREG_ZERO, 1,
+  { "sltb_u", TILEPRO_OPC_SLTB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltb_u.sn", TILE_OPC_SLTB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "sltb_u.sn", TILEPRO_OPC_SLTB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slte", TILE_OPC_SLTE, 0xf, 3, TREG_ZERO, 1,
+  { "slte", TILEPRO_OPC_SLTE, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "slte.sn", TILE_OPC_SLTE_SN, 0x3, 3, TREG_SN, 1,
+  { "slte.sn", TILEPRO_OPC_SLTE_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slte_u", TILE_OPC_SLTE_U, 0xf, 3, TREG_ZERO, 1,
+  { "slte_u", TILEPRO_OPC_SLTE_U, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "slte_u.sn", TILE_OPC_SLTE_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slte_u.sn", TILEPRO_OPC_SLTE_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteb", TILE_OPC_SLTEB, 0x3, 3, TREG_ZERO, 1,
+  { "slteb", TILEPRO_OPC_SLTEB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteb.sn", TILE_OPC_SLTEB_SN, 0x3, 3, TREG_SN, 1,
+  { "slteb.sn", TILEPRO_OPC_SLTEB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteb_u", TILE_OPC_SLTEB_U, 0x3, 3, TREG_ZERO, 1,
+  { "slteb_u", TILEPRO_OPC_SLTEB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteb_u.sn", TILE_OPC_SLTEB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slteb_u.sn", TILEPRO_OPC_SLTEB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteh", TILE_OPC_SLTEH, 0x3, 3, TREG_ZERO, 1,
+  { "slteh", TILEPRO_OPC_SLTEH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteh.sn", TILE_OPC_SLTEH_SN, 0x3, 3, TREG_SN, 1,
+  { "slteh.sn", TILEPRO_OPC_SLTEH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteh_u", TILE_OPC_SLTEH_U, 0x3, 3, TREG_ZERO, 1,
+  { "slteh_u", TILEPRO_OPC_SLTEH_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slteh_u.sn", TILE_OPC_SLTEH_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slteh_u.sn", TILEPRO_OPC_SLTEH_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slth", TILE_OPC_SLTH, 0x3, 3, TREG_ZERO, 1,
+  { "slth", TILEPRO_OPC_SLTH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slth.sn", TILE_OPC_SLTH_SN, 0x3, 3, TREG_SN, 1,
+  { "slth.sn", TILEPRO_OPC_SLTH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slth_u", TILE_OPC_SLTH_U, 0x3, 3, TREG_ZERO, 1,
+  { "slth_u", TILEPRO_OPC_SLTH_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slth_u.sn", TILE_OPC_SLTH_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slth_u.sn", TILEPRO_OPC_SLTH_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slti", TILE_OPC_SLTI, 0xf, 3, TREG_ZERO, 1,
+  { "slti", TILEPRO_OPC_SLTI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "slti.sn", TILE_OPC_SLTI_SN, 0x3, 3, TREG_SN, 1,
+  { "slti.sn", TILEPRO_OPC_SLTI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "slti_u", TILE_OPC_SLTI_U, 0xf, 3, TREG_ZERO, 1,
+  { "slti_u", TILEPRO_OPC_SLTI_U, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
   },
-  { "slti_u.sn", TILE_OPC_SLTI_U_SN, 0x3, 3, TREG_SN, 1,
+  { "slti_u.sn", TILEPRO_OPC_SLTI_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltib", TILE_OPC_SLTIB, 0x3, 3, TREG_ZERO, 1,
+  { "sltib", TILEPRO_OPC_SLTIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltib.sn", TILE_OPC_SLTIB_SN, 0x3, 3, TREG_SN, 1,
+  { "sltib.sn", TILEPRO_OPC_SLTIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltib_u", TILE_OPC_SLTIB_U, 0x3, 3, TREG_ZERO, 1,
+  { "sltib_u", TILEPRO_OPC_SLTIB_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltib_u.sn", TILE_OPC_SLTIB_U_SN, 0x3, 3, TREG_SN, 1,
+  { "sltib_u.sn", TILEPRO_OPC_SLTIB_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltih", TILE_OPC_SLTIH, 0x3, 3, TREG_ZERO, 1,
+  { "sltih", TILEPRO_OPC_SLTIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltih.sn", TILE_OPC_SLTIH_SN, 0x3, 3, TREG_SN, 1,
+  { "sltih.sn", TILEPRO_OPC_SLTIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltih_u", TILE_OPC_SLTIH_U, 0x3, 3, TREG_ZERO, 1,
+  { "sltih_u", TILEPRO_OPC_SLTIH_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sltih_u.sn", TILE_OPC_SLTIH_U_SN, 0x3, 3, TREG_SN, 1,
+  { "sltih_u.sn", TILEPRO_OPC_SLTIH_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sne", TILE_OPC_SNE, 0xf, 3, TREG_ZERO, 1,
+  { "sne", TILEPRO_OPC_SNE, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "sne.sn", TILE_OPC_SNE_SN, 0x3, 3, TREG_SN, 1,
+  { "sne.sn", TILEPRO_OPC_SNE_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sneb", TILE_OPC_SNEB, 0x3, 3, TREG_ZERO, 1,
+  { "sneb", TILEPRO_OPC_SNEB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sneb.sn", TILE_OPC_SNEB_SN, 0x3, 3, TREG_SN, 1,
+  { "sneb.sn", TILEPRO_OPC_SNEB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sneh", TILE_OPC_SNEH, 0x3, 3, TREG_ZERO, 1,
+  { "sneh", TILEPRO_OPC_SNEH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sneh.sn", TILE_OPC_SNEH_SN, 0x3, 3, TREG_SN, 1,
+  { "sneh.sn", TILEPRO_OPC_SNEH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sra", TILE_OPC_SRA, 0xf, 3, TREG_ZERO, 1,
+  { "sra", TILEPRO_OPC_SRA, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "sra.sn", TILE_OPC_SRA_SN, 0x3, 3, TREG_SN, 1,
+  { "sra.sn", TILEPRO_OPC_SRA_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "srab", TILE_OPC_SRAB, 0x3, 3, TREG_ZERO, 1,
+  { "srab", TILEPRO_OPC_SRAB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "srab.sn", TILE_OPC_SRAB_SN, 0x3, 3, TREG_SN, 1,
+  { "srab.sn", TILEPRO_OPC_SRAB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "srah", TILE_OPC_SRAH, 0x3, 3, TREG_ZERO, 1,
+  { "srah", TILEPRO_OPC_SRAH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "srah.sn", TILE_OPC_SRAH_SN, 0x3, 3, TREG_SN, 1,
+  { "srah.sn", TILEPRO_OPC_SRAH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "srai", TILE_OPC_SRAI, 0xf, 3, TREG_ZERO, 1,
+  { "srai", TILEPRO_OPC_SRAI, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
   },
-  { "srai.sn", TILE_OPC_SRAI_SN, 0x3, 3, TREG_SN, 1,
+  { "srai.sn", TILEPRO_OPC_SRAI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sraib", TILE_OPC_SRAIB, 0x3, 3, TREG_ZERO, 1,
+  { "sraib", TILEPRO_OPC_SRAIB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sraib.sn", TILE_OPC_SRAIB_SN, 0x3, 3, TREG_SN, 1,
+  { "sraib.sn", TILEPRO_OPC_SRAIB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sraih", TILE_OPC_SRAIH, 0x3, 3, TREG_ZERO, 1,
+  { "sraih", TILEPRO_OPC_SRAIH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sraih.sn", TILE_OPC_SRAIH_SN, 0x3, 3, TREG_SN, 1,
+  { "sraih.sn", TILEPRO_OPC_SRAIH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sub", TILE_OPC_SUB, 0xf, 3, TREG_ZERO, 1,
+  { "sub", TILEPRO_OPC_SUB, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "sub.sn", TILE_OPC_SUB_SN, 0x3, 3, TREG_SN, 1,
+  { "sub.sn", TILEPRO_OPC_SUB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subb", TILE_OPC_SUBB, 0x3, 3, TREG_ZERO, 1,
+  { "subb", TILEPRO_OPC_SUBB, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subb.sn", TILE_OPC_SUBB_SN, 0x3, 3, TREG_SN, 1,
+  { "subb.sn", TILEPRO_OPC_SUBB_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subbs_u", TILE_OPC_SUBBS_U, 0x3, 3, TREG_ZERO, 1,
+  { "subbs_u", TILEPRO_OPC_SUBBS_U, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subbs_u.sn", TILE_OPC_SUBBS_U_SN, 0x3, 3, TREG_SN, 1,
+  { "subbs_u.sn", TILEPRO_OPC_SUBBS_U_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subh", TILE_OPC_SUBH, 0x3, 3, TREG_ZERO, 1,
+  { "subh", TILEPRO_OPC_SUBH, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subh.sn", TILE_OPC_SUBH_SN, 0x3, 3, TREG_SN, 1,
+  { "subh.sn", TILEPRO_OPC_SUBH_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subhs", TILE_OPC_SUBHS, 0x3, 3, TREG_ZERO, 1,
+  { "subhs", TILEPRO_OPC_SUBHS, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subhs.sn", TILE_OPC_SUBHS_SN, 0x3, 3, TREG_SN, 1,
+  { "subhs.sn", TILEPRO_OPC_SUBHS_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subs", TILE_OPC_SUBS, 0x3, 3, TREG_ZERO, 1,
+  { "subs", TILEPRO_OPC_SUBS, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "subs.sn", TILE_OPC_SUBS_SN, 0x3, 3, TREG_SN, 1,
+  { "subs.sn", TILEPRO_OPC_SUBS_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "sw", TILE_OPC_SW, 0x12, 2, TREG_ZERO, 1,
+  { "sw", TILEPRO_OPC_SW, 0x12, 2, TREG_ZERO, 1,
     { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
   },
-  { "swadd", TILE_OPC_SWADD, 0x2, 3, TREG_ZERO, 1,
+  { "swadd", TILEPRO_OPC_SWADD, 0x2, 3, TREG_ZERO, 1,
     { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
   },
-  { "swint0", TILE_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0,
+  { "swint0", TILEPRO_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "swint1", TILE_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0,
+  { "swint1", TILEPRO_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "swint2", TILE_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0,
+  { "swint2", TILEPRO_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "swint3", TILE_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0,
+  { "swint3", TILEPRO_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0,
     { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
   },
-  { "tblidxb0", TILE_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1,
+  { "tblidxb0", TILEPRO_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1,
     { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
   },
-  { "tblidxb0.sn", TILE_OPC_TBLIDXB0_SN, 0x1, 2, TREG_SN, 1,
+  { "tblidxb0.sn", TILEPRO_OPC_TBLIDXB0_SN, 0x1, 2, TREG_SN, 1,
     { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "tblidxb1", TILE_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1,
+  { "tblidxb1", TILEPRO_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1,
     { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
   },
-  { "tblidxb1.sn", TILE_OPC_TBLIDXB1_SN, 0x1, 2, TREG_SN, 1,
+  { "tblidxb1.sn", TILEPRO_OPC_TBLIDXB1_SN, 0x1, 2, TREG_SN, 1,
     { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "tblidxb2", TILE_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1,
+  { "tblidxb2", TILEPRO_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1,
     { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
   },
-  { "tblidxb2.sn", TILE_OPC_TBLIDXB2_SN, 0x1, 2, TREG_SN, 1,
+  { "tblidxb2.sn", TILEPRO_OPC_TBLIDXB2_SN, 0x1, 2, TREG_SN, 1,
     { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "tblidxb3", TILE_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1,
+  { "tblidxb3", TILEPRO_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1,
     { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
   },
-  { "tblidxb3.sn", TILE_OPC_TBLIDXB3_SN, 0x1, 2, TREG_SN, 1,
+  { "tblidxb3.sn", TILEPRO_OPC_TBLIDXB3_SN, 0x1, 2, TREG_SN, 1,
     { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
   },
-  { "tns", TILE_OPC_TNS, 0x2, 2, TREG_ZERO, 1,
+  { "tns", TILEPRO_OPC_TNS, 0x2, 2, TREG_ZERO, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "tns.sn", TILE_OPC_TNS_SN, 0x2, 2, TREG_SN, 1,
+  { "tns.sn", TILEPRO_OPC_TNS_SN, 0x2, 2, TREG_SN, 1,
     { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "wh64", TILE_OPC_WH64, 0x2, 1, TREG_ZERO, 1,
+  { "wh64", TILEPRO_OPC_WH64, 0x2, 1, TREG_ZERO, 1,
     { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
   },
-  { "xor", TILE_OPC_XOR, 0xf, 3, TREG_ZERO, 1,
+  { "xor", TILEPRO_OPC_XOR, 0xf, 3, TREG_ZERO, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
   },
-  { "xor.sn", TILE_OPC_XOR_SN, 0x3, 3, TREG_SN, 1,
+  { "xor.sn", TILEPRO_OPC_XOR_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
   },
-  { "xori", TILE_OPC_XORI, 0x3, 3, TREG_ZERO, 1,
+  { "xori", TILEPRO_OPC_XORI, 0x3, 3, TREG_ZERO, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { "xori.sn", TILE_OPC_XORI_SN, 0x3, 3, TREG_SN, 1,
+  { "xori.sn", TILEPRO_OPC_XORI_SN, 0x3, 3, TREG_SN, 1,
     { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
   },
-  { NULL, TILE_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } },
+  { NULL, TILEPRO_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } },
   }
 };
 #define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6))
-#define CHILD(array_index) (TILE_OPC_NONE + (array_index))
+#define CHILD(array_index) (TILEPRO_OPC_NONE + (array_index))
 
 static const unsigned short decode_X0_fsm[1153] =
 {
   BITFIELD(22, 9) /* index 0 */,
   CHILD(513), CHILD(530), CHILD(547), CHILD(564), CHILD(596), CHILD(613),
-  CHILD(630), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, CHILD(663), CHILD(680), CHILD(697), CHILD(714), CHILD(746),
-  CHILD(763), CHILD(780), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, CHILD(813), CHILD(813), CHILD(813),
+  CHILD(630), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(663), CHILD(680), CHILD(697),
+  CHILD(714), CHILD(746), CHILD(763), CHILD(780), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
@@ -1227,7 +1247,7 @@
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
   CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
-  CHILD(813), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(828), CHILD(828),
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
@@ -1237,7 +1257,8 @@
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
   CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
-  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(843),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
@@ -1248,333 +1269,371 @@
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
-  CHILD(843), CHILD(843), CHILD(843), CHILD(873), CHILD(878), CHILD(883),
-  CHILD(903), CHILD(908), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(913),
-  CHILD(918), CHILD(923), CHILD(943), CHILD(948), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, CHILD(953), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(988), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(993),
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, CHILD(1076), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(873), CHILD(878), CHILD(883), CHILD(903), CHILD(908),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(913),
+  CHILD(918), CHILD(923), CHILD(943), CHILD(948), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(953), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(988), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, CHILD(993), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(1076), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(18, 4) /* index 513 */,
-  TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD,
-  TILE_OPC_ADIFFB_U, TILE_OPC_ADIFFH, TILE_OPC_AND, TILE_OPC_AVGB_U,
-  TILE_OPC_AVGH, TILE_OPC_CRC32_32, TILE_OPC_CRC32_8, TILE_OPC_INTHB,
-  TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH, TILE_OPC_MAXB_U,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB, TILEPRO_OPC_ADDH, TILEPRO_OPC_ADD,
+  TILEPRO_OPC_ADIFFB_U, TILEPRO_OPC_ADIFFH, TILEPRO_OPC_AND,
+  TILEPRO_OPC_AVGB_U, TILEPRO_OPC_AVGH, TILEPRO_OPC_CRC32_32,
+  TILEPRO_OPC_CRC32_8, TILEPRO_OPC_INTHB, TILEPRO_OPC_INTHH,
+  TILEPRO_OPC_INTLB, TILEPRO_OPC_INTLH, TILEPRO_OPC_MAXB_U,
   BITFIELD(18, 4) /* index 530 */,
-  TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH, TILE_OPC_MNZB, TILE_OPC_MNZH,
-  TILE_OPC_MNZ, TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_SU, TILE_OPC_MULHHA_UU,
-  TILE_OPC_MULHHSA_UU, TILE_OPC_MULHH_SS, TILE_OPC_MULHH_SU,
-  TILE_OPC_MULHH_UU, TILE_OPC_MULHLA_SS, TILE_OPC_MULHLA_SU,
-  TILE_OPC_MULHLA_US,
+  TILEPRO_OPC_MAXH, TILEPRO_OPC_MINB_U, TILEPRO_OPC_MINH, TILEPRO_OPC_MNZB,
+  TILEPRO_OPC_MNZH, TILEPRO_OPC_MNZ, TILEPRO_OPC_MULHHA_SS,
+  TILEPRO_OPC_MULHHA_SU, TILEPRO_OPC_MULHHA_UU, TILEPRO_OPC_MULHHSA_UU,
+  TILEPRO_OPC_MULHH_SS, TILEPRO_OPC_MULHH_SU, TILEPRO_OPC_MULHH_UU,
+  TILEPRO_OPC_MULHLA_SS, TILEPRO_OPC_MULHLA_SU, TILEPRO_OPC_MULHLA_US,
   BITFIELD(18, 4) /* index 547 */,
-  TILE_OPC_MULHLA_UU, TILE_OPC_MULHLSA_UU, TILE_OPC_MULHL_SS,
-  TILE_OPC_MULHL_SU, TILE_OPC_MULHL_US, TILE_OPC_MULHL_UU, TILE_OPC_MULLLA_SS,
-  TILE_OPC_MULLLA_SU, TILE_OPC_MULLLA_UU, TILE_OPC_MULLLSA_UU,
-  TILE_OPC_MULLL_SS, TILE_OPC_MULLL_SU, TILE_OPC_MULLL_UU, TILE_OPC_MVNZ,
-  TILE_OPC_MVZ, TILE_OPC_MZB,
+  TILEPRO_OPC_MULHLA_UU, TILEPRO_OPC_MULHLSA_UU, TILEPRO_OPC_MULHL_SS,
+  TILEPRO_OPC_MULHL_SU, TILEPRO_OPC_MULHL_US, TILEPRO_OPC_MULHL_UU,
+  TILEPRO_OPC_MULLLA_SS, TILEPRO_OPC_MULLLA_SU, TILEPRO_OPC_MULLLA_UU,
+  TILEPRO_OPC_MULLLSA_UU, TILEPRO_OPC_MULLL_SS, TILEPRO_OPC_MULLL_SU,
+  TILEPRO_OPC_MULLL_UU, TILEPRO_OPC_MVNZ, TILEPRO_OPC_MVZ, TILEPRO_OPC_MZB,
   BITFIELD(18, 4) /* index 564 */,
-  TILE_OPC_MZH, TILE_OPC_MZ, TILE_OPC_NOR, CHILD(581), TILE_OPC_PACKHB,
-  TILE_OPC_PACKLB, TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
-  TILE_OPC_SADAB_U, TILE_OPC_SADAH, TILE_OPC_SADAH_U, TILE_OPC_SADB_U,
-  TILE_OPC_SADH, TILE_OPC_SADH_U,
+  TILEPRO_OPC_MZH, TILEPRO_OPC_MZ, TILEPRO_OPC_NOR, CHILD(581),
+  TILEPRO_OPC_PACKHB, TILEPRO_OPC_PACKLB, TILEPRO_OPC_RL, TILEPRO_OPC_S1A,
+  TILEPRO_OPC_S2A, TILEPRO_OPC_S3A, TILEPRO_OPC_SADAB_U, TILEPRO_OPC_SADAH,
+  TILEPRO_OPC_SADAH_U, TILEPRO_OPC_SADB_U, TILEPRO_OPC_SADH,
+  TILEPRO_OPC_SADH_U,
   BITFIELD(12, 2) /* index 581 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(586),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(586),
   BITFIELD(14, 2) /* index 586 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(591),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(591),
   BITFIELD(16, 2) /* index 591 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE,
   BITFIELD(18, 4) /* index 596 */,
-  TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB, TILE_OPC_SHLH,
-  TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR, TILE_OPC_SLTB,
-  TILE_OPC_SLTB_U, TILE_OPC_SLTEB, TILE_OPC_SLTEB_U, TILE_OPC_SLTEH,
-  TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
+  TILEPRO_OPC_SEQB, TILEPRO_OPC_SEQH, TILEPRO_OPC_SEQ, TILEPRO_OPC_SHLB,
+  TILEPRO_OPC_SHLH, TILEPRO_OPC_SHL, TILEPRO_OPC_SHRB, TILEPRO_OPC_SHRH,
+  TILEPRO_OPC_SHR, TILEPRO_OPC_SLTB, TILEPRO_OPC_SLTB_U, TILEPRO_OPC_SLTEB,
+  TILEPRO_OPC_SLTEB_U, TILEPRO_OPC_SLTEH, TILEPRO_OPC_SLTEH_U,
+  TILEPRO_OPC_SLTE,
   BITFIELD(18, 4) /* index 613 */,
-  TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
-  TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
-  TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
-  TILE_OPC_XOR, TILE_OPC_DWORD_ALIGN,
+  TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLTH, TILEPRO_OPC_SLTH_U, TILEPRO_OPC_SLT,
+  TILEPRO_OPC_SLT_U, TILEPRO_OPC_SNEB, TILEPRO_OPC_SNEH, TILEPRO_OPC_SNE,
+  TILEPRO_OPC_SRAB, TILEPRO_OPC_SRAH, TILEPRO_OPC_SRA, TILEPRO_OPC_SUBB,
+  TILEPRO_OPC_SUBH, TILEPRO_OPC_SUB, TILEPRO_OPC_XOR, TILEPRO_OPC_DWORD_ALIGN,
   BITFIELD(18, 3) /* index 630 */,
   CHILD(639), CHILD(642), CHILD(645), CHILD(648), CHILD(651), CHILD(654),
   CHILD(657), CHILD(660),
   BITFIELD(21, 1) /* index 639 */,
-  TILE_OPC_ADDS, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDS, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 642 */,
-  TILE_OPC_SUBS, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBS, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 645 */,
-  TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDBS_U, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 648 */,
-  TILE_OPC_ADDHS, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDHS, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 651 */,
-  TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBBS_U, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 654 */,
-  TILE_OPC_SUBHS, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBHS, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 657 */,
-  TILE_OPC_PACKHS, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKHS, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 660 */,
-  TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKBS_U, TILEPRO_OPC_NONE,
   BITFIELD(18, 4) /* index 663 */,
-  TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
-  TILE_OPC_ADIFFB_U_SN, TILE_OPC_ADIFFH_SN, TILE_OPC_AND_SN,
-  TILE_OPC_AVGB_U_SN, TILE_OPC_AVGH_SN, TILE_OPC_CRC32_32_SN,
-  TILE_OPC_CRC32_8_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN,
-  TILE_OPC_INTLB_SN, TILE_OPC_INTLH_SN, TILE_OPC_MAXB_U_SN,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB_SN, TILEPRO_OPC_ADDH_SN,
+  TILEPRO_OPC_ADD_SN, TILEPRO_OPC_ADIFFB_U_SN, TILEPRO_OPC_ADIFFH_SN,
+  TILEPRO_OPC_AND_SN, TILEPRO_OPC_AVGB_U_SN, TILEPRO_OPC_AVGH_SN,
+  TILEPRO_OPC_CRC32_32_SN, TILEPRO_OPC_CRC32_8_SN, TILEPRO_OPC_INTHB_SN,
+  TILEPRO_OPC_INTHH_SN, TILEPRO_OPC_INTLB_SN, TILEPRO_OPC_INTLH_SN,
+  TILEPRO_OPC_MAXB_U_SN,
   BITFIELD(18, 4) /* index 680 */,
-  TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN, TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN,
-  TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN, TILE_OPC_MULHHA_SS_SN,
-  TILE_OPC_MULHHA_SU_SN, TILE_OPC_MULHHA_UU_SN, TILE_OPC_MULHHSA_UU_SN,
-  TILE_OPC_MULHH_SS_SN, TILE_OPC_MULHH_SU_SN, TILE_OPC_MULHH_UU_SN,
-  TILE_OPC_MULHLA_SS_SN, TILE_OPC_MULHLA_SU_SN, TILE_OPC_MULHLA_US_SN,
+  TILEPRO_OPC_MAXH_SN, TILEPRO_OPC_MINB_U_SN, TILEPRO_OPC_MINH_SN,
+  TILEPRO_OPC_MNZB_SN, TILEPRO_OPC_MNZH_SN, TILEPRO_OPC_MNZ_SN,
+  TILEPRO_OPC_MULHHA_SS_SN, TILEPRO_OPC_MULHHA_SU_SN,
+  TILEPRO_OPC_MULHHA_UU_SN, TILEPRO_OPC_MULHHSA_UU_SN,
+  TILEPRO_OPC_MULHH_SS_SN, TILEPRO_OPC_MULHH_SU_SN, TILEPRO_OPC_MULHH_UU_SN,
+  TILEPRO_OPC_MULHLA_SS_SN, TILEPRO_OPC_MULHLA_SU_SN,
+  TILEPRO_OPC_MULHLA_US_SN,
   BITFIELD(18, 4) /* index 697 */,
-  TILE_OPC_MULHLA_UU_SN, TILE_OPC_MULHLSA_UU_SN, TILE_OPC_MULHL_SS_SN,
-  TILE_OPC_MULHL_SU_SN, TILE_OPC_MULHL_US_SN, TILE_OPC_MULHL_UU_SN,
-  TILE_OPC_MULLLA_SS_SN, TILE_OPC_MULLLA_SU_SN, TILE_OPC_MULLLA_UU_SN,
-  TILE_OPC_MULLLSA_UU_SN, TILE_OPC_MULLL_SS_SN, TILE_OPC_MULLL_SU_SN,
-  TILE_OPC_MULLL_UU_SN, TILE_OPC_MVNZ_SN, TILE_OPC_MVZ_SN, TILE_OPC_MZB_SN,
+  TILEPRO_OPC_MULHLA_UU_SN, TILEPRO_OPC_MULHLSA_UU_SN,
+  TILEPRO_OPC_MULHL_SS_SN, TILEPRO_OPC_MULHL_SU_SN, TILEPRO_OPC_MULHL_US_SN,
+  TILEPRO_OPC_MULHL_UU_SN, TILEPRO_OPC_MULLLA_SS_SN, TILEPRO_OPC_MULLLA_SU_SN,
+  TILEPRO_OPC_MULLLA_UU_SN, TILEPRO_OPC_MULLLSA_UU_SN,
+  TILEPRO_OPC_MULLL_SS_SN, TILEPRO_OPC_MULLL_SU_SN, TILEPRO_OPC_MULLL_UU_SN,
+  TILEPRO_OPC_MVNZ_SN, TILEPRO_OPC_MVZ_SN, TILEPRO_OPC_MZB_SN,
   BITFIELD(18, 4) /* index 714 */,
-  TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN, CHILD(731),
-  TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN, TILE_OPC_S1A_SN,
-  TILE_OPC_S2A_SN, TILE_OPC_S3A_SN, TILE_OPC_SADAB_U_SN, TILE_OPC_SADAH_SN,
-  TILE_OPC_SADAH_U_SN, TILE_OPC_SADB_U_SN, TILE_OPC_SADH_SN,
-  TILE_OPC_SADH_U_SN,
+  TILEPRO_OPC_MZH_SN, TILEPRO_OPC_MZ_SN, TILEPRO_OPC_NOR_SN, CHILD(731),
+  TILEPRO_OPC_PACKHB_SN, TILEPRO_OPC_PACKLB_SN, TILEPRO_OPC_RL_SN,
+  TILEPRO_OPC_S1A_SN, TILEPRO_OPC_S2A_SN, TILEPRO_OPC_S3A_SN,
+  TILEPRO_OPC_SADAB_U_SN, TILEPRO_OPC_SADAH_SN, TILEPRO_OPC_SADAH_U_SN,
+  TILEPRO_OPC_SADB_U_SN, TILEPRO_OPC_SADH_SN, TILEPRO_OPC_SADH_U_SN,
   BITFIELD(12, 2) /* index 731 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(736),
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(736),
   BITFIELD(14, 2) /* index 736 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(741),
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(741),
   BITFIELD(16, 2) /* index 741 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN,
+  TILEPRO_OPC_MOVE_SN,
   BITFIELD(18, 4) /* index 746 */,
-  TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN, TILE_OPC_SHLB_SN,
-  TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN, TILE_OPC_SHRH_SN,
-  TILE_OPC_SHR_SN, TILE_OPC_SLTB_SN, TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN,
-  TILE_OPC_SLTEB_U_SN, TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN,
-  TILE_OPC_SLTE_SN,
+  TILEPRO_OPC_SEQB_SN, TILEPRO_OPC_SEQH_SN, TILEPRO_OPC_SEQ_SN,
+  TILEPRO_OPC_SHLB_SN, TILEPRO_OPC_SHLH_SN, TILEPRO_OPC_SHL_SN,
+  TILEPRO_OPC_SHRB_SN, TILEPRO_OPC_SHRH_SN, TILEPRO_OPC_SHR_SN,
+  TILEPRO_OPC_SLTB_SN, TILEPRO_OPC_SLTB_U_SN, TILEPRO_OPC_SLTEB_SN,
+  TILEPRO_OPC_SLTEB_U_SN, TILEPRO_OPC_SLTEH_SN, TILEPRO_OPC_SLTEH_U_SN,
+  TILEPRO_OPC_SLTE_SN,
   BITFIELD(18, 4) /* index 763 */,
-  TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
-  TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
-  TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
-  TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN, TILE_OPC_XOR_SN, TILE_OPC_DWORD_ALIGN_SN,
+  TILEPRO_OPC_SLTE_U_SN, TILEPRO_OPC_SLTH_SN, TILEPRO_OPC_SLTH_U_SN,
+  TILEPRO_OPC_SLT_SN, TILEPRO_OPC_SLT_U_SN, TILEPRO_OPC_SNEB_SN,
+  TILEPRO_OPC_SNEH_SN, TILEPRO_OPC_SNE_SN, TILEPRO_OPC_SRAB_SN,
+  TILEPRO_OPC_SRAH_SN, TILEPRO_OPC_SRA_SN, TILEPRO_OPC_SUBB_SN,
+  TILEPRO_OPC_SUBH_SN, TILEPRO_OPC_SUB_SN, TILEPRO_OPC_XOR_SN,
+  TILEPRO_OPC_DWORD_ALIGN_SN,
   BITFIELD(18, 3) /* index 780 */,
   CHILD(789), CHILD(792), CHILD(795), CHILD(798), CHILD(801), CHILD(804),
   CHILD(807), CHILD(810),
   BITFIELD(21, 1) /* index 789 */,
-  TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDS_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 792 */,
-  TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBS_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 795 */,
-  TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 798 */,
-  TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 801 */,
-  TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 804 */,
-  TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 807 */,
-  TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(21, 1) /* index 810 */,
-  TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(6, 2) /* index 813 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(818),
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  CHILD(818),
   BITFIELD(8, 2) /* index 818 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(823),
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  CHILD(823),
   BITFIELD(10, 2) /* index 823 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  TILEPRO_OPC_MOVELI_SN,
   BITFIELD(6, 2) /* index 828 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(833),
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(833),
   BITFIELD(8, 2) /* index 833 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(838),
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(838),
   BITFIELD(10, 2) /* index 838 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_MOVELI,
   BITFIELD(0, 2) /* index 843 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(848),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(848),
   BITFIELD(2, 2) /* index 848 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(853),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(853),
   BITFIELD(4, 2) /* index 853 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(858),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(858),
   BITFIELD(6, 2) /* index 858 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(863),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(863),
   BITFIELD(8, 2) /* index 863 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(868),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(868),
   BITFIELD(10, 2) /* index 868 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_INFOL,
   BITFIELD(20, 2) /* index 873 */,
-  TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB, TILEPRO_OPC_ADDIH, TILEPRO_OPC_ADDI,
   BITFIELD(20, 2) /* index 878 */,
-  TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MINIB_U, TILE_OPC_MINIH,
+  TILEPRO_OPC_MAXIB_U, TILEPRO_OPC_MAXIH, TILEPRO_OPC_MINIB_U,
+  TILEPRO_OPC_MINIH,
   BITFIELD(20, 2) /* index 883 */,
-  CHILD(888), TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI,
+  CHILD(888), TILEPRO_OPC_SEQIB, TILEPRO_OPC_SEQIH, TILEPRO_OPC_SEQI,
   BITFIELD(6, 2) /* index 888 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(893),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(893),
   BITFIELD(8, 2) /* index 893 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(898),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(898),
   BITFIELD(10, 2) /* index 898 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI,
   BITFIELD(20, 2) /* index 903 */,
-  TILE_OPC_SLTIB, TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U,
+  TILEPRO_OPC_SLTIB, TILEPRO_OPC_SLTIB_U, TILEPRO_OPC_SLTIH,
+  TILEPRO_OPC_SLTIH_U,
   BITFIELD(20, 2) /* index 908 */,
-  TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(20, 2) /* index 913 */,
-  TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB_SN, TILEPRO_OPC_ADDIH_SN,
+  TILEPRO_OPC_ADDI_SN,
   BITFIELD(20, 2) /* index 918 */,
-  TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MINIB_U_SN,
-  TILE_OPC_MINIH_SN,
+  TILEPRO_OPC_MAXIB_U_SN, TILEPRO_OPC_MAXIH_SN, TILEPRO_OPC_MINIB_U_SN,
+  TILEPRO_OPC_MINIH_SN,
   BITFIELD(20, 2) /* index 923 */,
-  CHILD(928), TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN,
+  CHILD(928), TILEPRO_OPC_SEQIB_SN, TILEPRO_OPC_SEQIH_SN, TILEPRO_OPC_SEQI_SN,
   BITFIELD(6, 2) /* index 928 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(933),
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(933),
   BITFIELD(8, 2) /* index 933 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(938),
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(938),
   BITFIELD(10, 2) /* index 938 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN,
+  TILEPRO_OPC_MOVEI_SN,
   BITFIELD(20, 2) /* index 943 */,
-  TILE_OPC_SLTIB_SN, TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN,
-  TILE_OPC_SLTIH_U_SN,
+  TILEPRO_OPC_SLTIB_SN, TILEPRO_OPC_SLTIB_U_SN, TILEPRO_OPC_SLTIH_SN,
+  TILEPRO_OPC_SLTIH_U_SN,
   BITFIELD(20, 2) /* index 948 */,
-  TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_SLTI_SN, TILEPRO_OPC_SLTI_U_SN, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE,
   BITFIELD(20, 2) /* index 953 */,
-  TILE_OPC_NONE, CHILD(958), TILE_OPC_XORI, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, CHILD(958), TILEPRO_OPC_XORI, TILEPRO_OPC_NONE,
   BITFIELD(0, 2) /* index 958 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(963),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(963),
   BITFIELD(2, 2) /* index 963 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(968),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(968),
   BITFIELD(4, 2) /* index 968 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(973),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(973),
   BITFIELD(6, 2) /* index 973 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(978),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(978),
   BITFIELD(8, 2) /* index 978 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(983),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(983),
   BITFIELD(10, 2) /* index 983 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO,
   BITFIELD(20, 2) /* index 988 */,
-  TILE_OPC_NONE, TILE_OPC_ANDI_SN, TILE_OPC_XORI_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ANDI_SN, TILEPRO_OPC_XORI_SN,
+  TILEPRO_OPC_NONE,
   BITFIELD(17, 5) /* index 993 */,
-  TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLIB, TILE_OPC_SHLIH, TILE_OPC_SHLI,
-  TILE_OPC_SHRIB, TILE_OPC_SHRIH, TILE_OPC_SHRI, TILE_OPC_SRAIB,
-  TILE_OPC_SRAIH, TILE_OPC_SRAI, CHILD(1026), TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_RLI, TILEPRO_OPC_SHLIB, TILEPRO_OPC_SHLIH,
+  TILEPRO_OPC_SHLI, TILEPRO_OPC_SHRIB, TILEPRO_OPC_SHRIH, TILEPRO_OPC_SHRI,
+  TILEPRO_OPC_SRAIB, TILEPRO_OPC_SRAIH, TILEPRO_OPC_SRAI, CHILD(1026),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(12, 4) /* index 1026 */,
-  TILE_OPC_NONE, CHILD(1043), CHILD(1046), CHILD(1049), CHILD(1052),
+  TILEPRO_OPC_NONE, CHILD(1043), CHILD(1046), CHILD(1049), CHILD(1052),
   CHILD(1055), CHILD(1058), CHILD(1061), CHILD(1064), CHILD(1067),
-  CHILD(1070), CHILD(1073), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE,
+  CHILD(1070), CHILD(1073), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1043 */,
-  TILE_OPC_BITX, TILE_OPC_NONE,
+  TILEPRO_OPC_BITX, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1046 */,
-  TILE_OPC_BYTEX, TILE_OPC_NONE,
+  TILEPRO_OPC_BYTEX, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1049 */,
-  TILE_OPC_CLZ, TILE_OPC_NONE,
+  TILEPRO_OPC_CLZ, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1052 */,
-  TILE_OPC_CTZ, TILE_OPC_NONE,
+  TILEPRO_OPC_CTZ, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1055 */,
-  TILE_OPC_FNOP, TILE_OPC_NONE,
+  TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1058 */,
-  TILE_OPC_NOP, TILE_OPC_NONE,
+  TILEPRO_OPC_NOP, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1061 */,
-  TILE_OPC_PCNT, TILE_OPC_NONE,
+  TILEPRO_OPC_PCNT, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1064 */,
-  TILE_OPC_TBLIDXB0, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB0, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1067 */,
-  TILE_OPC_TBLIDXB1, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB1, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1070 */,
-  TILE_OPC_TBLIDXB2, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB2, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1073 */,
-  TILE_OPC_TBLIDXB3, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB3, TILEPRO_OPC_NONE,
   BITFIELD(17, 5) /* index 1076 */,
-  TILE_OPC_NONE, TILE_OPC_RLI_SN, TILE_OPC_SHLIB_SN, TILE_OPC_SHLIH_SN,
-  TILE_OPC_SHLI_SN, TILE_OPC_SHRIB_SN, TILE_OPC_SHRIH_SN, TILE_OPC_SHRI_SN,
-  TILE_OPC_SRAIB_SN, TILE_OPC_SRAIH_SN, TILE_OPC_SRAI_SN, CHILD(1109),
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_RLI_SN, TILEPRO_OPC_SHLIB_SN,
+  TILEPRO_OPC_SHLIH_SN, TILEPRO_OPC_SHLI_SN, TILEPRO_OPC_SHRIB_SN,
+  TILEPRO_OPC_SHRIH_SN, TILEPRO_OPC_SHRI_SN, TILEPRO_OPC_SRAIB_SN,
+  TILEPRO_OPC_SRAIH_SN, TILEPRO_OPC_SRAI_SN, CHILD(1109), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(12, 4) /* index 1109 */,
-  TILE_OPC_NONE, CHILD(1126), CHILD(1129), CHILD(1132), CHILD(1135),
+  TILEPRO_OPC_NONE, CHILD(1126), CHILD(1129), CHILD(1132), CHILD(1135),
   CHILD(1055), CHILD(1058), CHILD(1138), CHILD(1141), CHILD(1144),
-  CHILD(1147), CHILD(1150), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE,
+  CHILD(1147), CHILD(1150), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1126 */,
-  TILE_OPC_BITX_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_BITX_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1129 */,
-  TILE_OPC_BYTEX_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_BYTEX_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1132 */,
-  TILE_OPC_CLZ_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_CLZ_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1135 */,
-  TILE_OPC_CTZ_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_CTZ_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1138 */,
-  TILE_OPC_PCNT_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_PCNT_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1141 */,
-  TILE_OPC_TBLIDXB0_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB0_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1144 */,
-  TILE_OPC_TBLIDXB1_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB1_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1147 */,
-  TILE_OPC_TBLIDXB2_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB2_SN, TILEPRO_OPC_NONE,
   BITFIELD(16, 1) /* index 1150 */,
-  TILE_OPC_TBLIDXB3_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB3_SN, TILEPRO_OPC_NONE,
 };
 
 static const unsigned short decode_X1_fsm[1540] =
 {
   BITFIELD(54, 9) /* index 0 */,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, CHILD(513), CHILD(561), CHILD(594),
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(641), CHILD(689),
-  CHILD(722), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(766),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  CHILD(513), CHILD(561), CHILD(594), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(641),
+  CHILD(689), CHILD(722), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(766),
   CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
   CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
   CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
@@ -1596,594 +1655,641 @@
   CHILD(826), CHILD(826), CHILD(826), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
   CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
-  CHILD(843), CHILD(860), CHILD(899), CHILD(923), CHILD(932), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, CHILD(941), CHILD(950), CHILD(974), CHILD(983),
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
-  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(992),
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  CHILD(1334), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
-  TILE_OPC_J, TILE_OPC_J, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
-  TILE_OPC_JAL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(843), CHILD(860), CHILD(899), CHILD(923), CHILD(932),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  CHILD(941), CHILD(950), CHILD(974), CHILD(983), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM,
+  TILEPRO_OPC_MM, TILEPRO_OPC_MM, TILEPRO_OPC_MM, CHILD(992),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, CHILD(1334),
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J,
+  TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_J, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL,
+  TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_JAL, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(49, 5) /* index 513 */,
-  TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD, TILE_OPC_AND,
-  TILE_OPC_INTHB, TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH,
-  TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR, TILE_OPC_LNK,
-  TILE_OPC_MAXB_U, TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH,
-  TILE_OPC_MNZB, TILE_OPC_MNZH, TILE_OPC_MNZ, TILE_OPC_MZB, TILE_OPC_MZH,
-  TILE_OPC_MZ, TILE_OPC_NOR, CHILD(546), TILE_OPC_PACKHB, TILE_OPC_PACKLB,
-  TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB, TILEPRO_OPC_ADDH, TILEPRO_OPC_ADD,
+  TILEPRO_OPC_AND, TILEPRO_OPC_INTHB, TILEPRO_OPC_INTHH, TILEPRO_OPC_INTLB,
+  TILEPRO_OPC_INTLH, TILEPRO_OPC_JALRP, TILEPRO_OPC_JALR, TILEPRO_OPC_JRP,
+  TILEPRO_OPC_JR, TILEPRO_OPC_LNK, TILEPRO_OPC_MAXB_U, TILEPRO_OPC_MAXH,
+  TILEPRO_OPC_MINB_U, TILEPRO_OPC_MINH, TILEPRO_OPC_MNZB, TILEPRO_OPC_MNZH,
+  TILEPRO_OPC_MNZ, TILEPRO_OPC_MZB, TILEPRO_OPC_MZH, TILEPRO_OPC_MZ,
+  TILEPRO_OPC_NOR, CHILD(546), TILEPRO_OPC_PACKHB, TILEPRO_OPC_PACKLB,
+  TILEPRO_OPC_RL, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_S3A,
   BITFIELD(43, 2) /* index 546 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(551),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(551),
   BITFIELD(45, 2) /* index 551 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(556),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(556),
   BITFIELD(47, 2) /* index 556 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE,
   BITFIELD(49, 5) /* index 561 */,
-  TILE_OPC_SB, TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB,
-  TILE_OPC_SHLH, TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR,
-  TILE_OPC_SH, TILE_OPC_SLTB, TILE_OPC_SLTB_U, TILE_OPC_SLTEB,
-  TILE_OPC_SLTEB_U, TILE_OPC_SLTEH, TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
-  TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
-  TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
-  TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
+  TILEPRO_OPC_SB, TILEPRO_OPC_SEQB, TILEPRO_OPC_SEQH, TILEPRO_OPC_SEQ,
+  TILEPRO_OPC_SHLB, TILEPRO_OPC_SHLH, TILEPRO_OPC_SHL, TILEPRO_OPC_SHRB,
+  TILEPRO_OPC_SHRH, TILEPRO_OPC_SHR, TILEPRO_OPC_SH, TILEPRO_OPC_SLTB,
+  TILEPRO_OPC_SLTB_U, TILEPRO_OPC_SLTEB, TILEPRO_OPC_SLTEB_U,
+  TILEPRO_OPC_SLTEH, TILEPRO_OPC_SLTEH_U, TILEPRO_OPC_SLTE,
+  TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLTH, TILEPRO_OPC_SLTH_U, TILEPRO_OPC_SLT,
+  TILEPRO_OPC_SLT_U, TILEPRO_OPC_SNEB, TILEPRO_OPC_SNEH, TILEPRO_OPC_SNE,
+  TILEPRO_OPC_SRAB, TILEPRO_OPC_SRAH, TILEPRO_OPC_SRA, TILEPRO_OPC_SUBB,
+  TILEPRO_OPC_SUBH, TILEPRO_OPC_SUB,
   BITFIELD(49, 4) /* index 594 */,
   CHILD(611), CHILD(614), CHILD(617), CHILD(620), CHILD(623), CHILD(626),
-  CHILD(629), CHILD(632), CHILD(635), CHILD(638), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(629), CHILD(632), CHILD(635), CHILD(638), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 611 */,
-  TILE_OPC_SW, TILE_OPC_NONE,
+  TILEPRO_OPC_SW, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 614 */,
-  TILE_OPC_XOR, TILE_OPC_NONE,
+  TILEPRO_OPC_XOR, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 617 */,
-  TILE_OPC_ADDS, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 620 */,
-  TILE_OPC_SUBS, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 623 */,
-  TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDBS_U, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 626 */,
-  TILE_OPC_ADDHS, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDHS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 629 */,
-  TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBBS_U, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 632 */,
-  TILE_OPC_SUBHS, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBHS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 635 */,
-  TILE_OPC_PACKHS, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKHS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 638 */,
-  TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKBS_U, TILEPRO_OPC_NONE,
   BITFIELD(49, 5) /* index 641 */,
-  TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
-  TILE_OPC_AND_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN, TILE_OPC_INTLB_SN,
-  TILE_OPC_INTLH_SN, TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR,
-  TILE_OPC_LNK_SN, TILE_OPC_MAXB_U_SN, TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN,
-  TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN, TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN,
-  TILE_OPC_MZB_SN, TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN,
-  CHILD(674), TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN,
-  TILE_OPC_S1A_SN, TILE_OPC_S2A_SN, TILE_OPC_S3A_SN,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDB_SN, TILEPRO_OPC_ADDH_SN,
+  TILEPRO_OPC_ADD_SN, TILEPRO_OPC_AND_SN, TILEPRO_OPC_INTHB_SN,
+  TILEPRO_OPC_INTHH_SN, TILEPRO_OPC_INTLB_SN, TILEPRO_OPC_INTLH_SN,
+  TILEPRO_OPC_JALRP, TILEPRO_OPC_JALR, TILEPRO_OPC_JRP, TILEPRO_OPC_JR,
+  TILEPRO_OPC_LNK_SN, TILEPRO_OPC_MAXB_U_SN, TILEPRO_OPC_MAXH_SN,
+  TILEPRO_OPC_MINB_U_SN, TILEPRO_OPC_MINH_SN, TILEPRO_OPC_MNZB_SN,
+  TILEPRO_OPC_MNZH_SN, TILEPRO_OPC_MNZ_SN, TILEPRO_OPC_MZB_SN,
+  TILEPRO_OPC_MZH_SN, TILEPRO_OPC_MZ_SN, TILEPRO_OPC_NOR_SN, CHILD(674),
+  TILEPRO_OPC_PACKHB_SN, TILEPRO_OPC_PACKLB_SN, TILEPRO_OPC_RL_SN,
+  TILEPRO_OPC_S1A_SN, TILEPRO_OPC_S2A_SN, TILEPRO_OPC_S3A_SN,
   BITFIELD(43, 2) /* index 674 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(679),
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(679),
   BITFIELD(45, 2) /* index 679 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(684),
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, CHILD(684),
   BITFIELD(47, 2) /* index 684 */,
-  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+  TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN, TILEPRO_OPC_OR_SN,
+  TILEPRO_OPC_MOVE_SN,
   BITFIELD(49, 5) /* index 689 */,
-  TILE_OPC_SB, TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN,
-  TILE_OPC_SHLB_SN, TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN,
-  TILE_OPC_SHRH_SN, TILE_OPC_SHR_SN, TILE_OPC_SH, TILE_OPC_SLTB_SN,
-  TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN, TILE_OPC_SLTEB_U_SN,
-  TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN, TILE_OPC_SLTE_SN,
-  TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
-  TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
-  TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
-  TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN,
+  TILEPRO_OPC_SB, TILEPRO_OPC_SEQB_SN, TILEPRO_OPC_SEQH_SN,
+  TILEPRO_OPC_SEQ_SN, TILEPRO_OPC_SHLB_SN, TILEPRO_OPC_SHLH_SN,
+  TILEPRO_OPC_SHL_SN, TILEPRO_OPC_SHRB_SN, TILEPRO_OPC_SHRH_SN,
+  TILEPRO_OPC_SHR_SN, TILEPRO_OPC_SH, TILEPRO_OPC_SLTB_SN,
+  TILEPRO_OPC_SLTB_U_SN, TILEPRO_OPC_SLTEB_SN, TILEPRO_OPC_SLTEB_U_SN,
+  TILEPRO_OPC_SLTEH_SN, TILEPRO_OPC_SLTEH_U_SN, TILEPRO_OPC_SLTE_SN,
+  TILEPRO_OPC_SLTE_U_SN, TILEPRO_OPC_SLTH_SN, TILEPRO_OPC_SLTH_U_SN,
+  TILEPRO_OPC_SLT_SN, TILEPRO_OPC_SLT_U_SN, TILEPRO_OPC_SNEB_SN,
+  TILEPRO_OPC_SNEH_SN, TILEPRO_OPC_SNE_SN, TILEPRO_OPC_SRAB_SN,
+  TILEPRO_OPC_SRAH_SN, TILEPRO_OPC_SRA_SN, TILEPRO_OPC_SUBB_SN,
+  TILEPRO_OPC_SUBH_SN, TILEPRO_OPC_SUB_SN,
   BITFIELD(49, 4) /* index 722 */,
   CHILD(611), CHILD(739), CHILD(742), CHILD(745), CHILD(748), CHILD(751),
-  CHILD(754), CHILD(757), CHILD(760), CHILD(763), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(754), CHILD(757), CHILD(760), CHILD(763), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 739 */,
-  TILE_OPC_XOR_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_XOR_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 742 */,
-  TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDS_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 745 */,
-  TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBS_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 748 */,
-  TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 751 */,
-  TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_ADDHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 754 */,
-  TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 757 */,
-  TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SUBHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 760 */,
-  TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKHS_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 763 */,
-  TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_PACKBS_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(37, 2) /* index 766 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(771),
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  CHILD(771),
   BITFIELD(39, 2) /* index 771 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(776),
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  CHILD(776),
   BITFIELD(41, 2) /* index 776 */,
-  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+  TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN, TILEPRO_OPC_ADDLI_SN,
+  TILEPRO_OPC_MOVELI_SN,
   BITFIELD(37, 2) /* index 781 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(786),
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(786),
   BITFIELD(39, 2) /* index 786 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(791),
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, CHILD(791),
   BITFIELD(41, 2) /* index 791 */,
-  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+  TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_ADDLI, TILEPRO_OPC_MOVELI,
   BITFIELD(31, 2) /* index 796 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(801),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(801),
   BITFIELD(33, 2) /* index 801 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(806),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(806),
   BITFIELD(35, 2) /* index 806 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(811),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(811),
   BITFIELD(37, 2) /* index 811 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(816),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(816),
   BITFIELD(39, 2) /* index 816 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(821),
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, CHILD(821),
   BITFIELD(41, 2) /* index 821 */,
-  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+  TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_AULI, TILEPRO_OPC_INFOL,
   BITFIELD(31, 4) /* index 826 */,
-  TILE_OPC_BZ, TILE_OPC_BZT, TILE_OPC_BNZ, TILE_OPC_BNZT, TILE_OPC_BGZ,
-  TILE_OPC_BGZT, TILE_OPC_BGEZ, TILE_OPC_BGEZT, TILE_OPC_BLZ, TILE_OPC_BLZT,
-  TILE_OPC_BLEZ, TILE_OPC_BLEZT, TILE_OPC_BBS, TILE_OPC_BBST, TILE_OPC_BBNS,
-  TILE_OPC_BBNST,
+  TILEPRO_OPC_BZ, TILEPRO_OPC_BZT, TILEPRO_OPC_BNZ, TILEPRO_OPC_BNZT,
+  TILEPRO_OPC_BGZ, TILEPRO_OPC_BGZT, TILEPRO_OPC_BGEZ, TILEPRO_OPC_BGEZT,
+  TILEPRO_OPC_BLZ, TILEPRO_OPC_BLZT, TILEPRO_OPC_BLEZ, TILEPRO_OPC_BLEZT,
+  TILEPRO_OPC_BBS, TILEPRO_OPC_BBST, TILEPRO_OPC_BBNS, TILEPRO_OPC_BBNST,
   BITFIELD(31, 4) /* index 843 */,
-  TILE_OPC_BZ_SN, TILE_OPC_BZT_SN, TILE_OPC_BNZ_SN, TILE_OPC_BNZT_SN,
-  TILE_OPC_BGZ_SN, TILE_OPC_BGZT_SN, TILE_OPC_BGEZ_SN, TILE_OPC_BGEZT_SN,
-  TILE_OPC_BLZ_SN, TILE_OPC_BLZT_SN, TILE_OPC_BLEZ_SN, TILE_OPC_BLEZT_SN,
-  TILE_OPC_BBS_SN, TILE_OPC_BBST_SN, TILE_OPC_BBNS_SN, TILE_OPC_BBNST_SN,
+  TILEPRO_OPC_BZ_SN, TILEPRO_OPC_BZT_SN, TILEPRO_OPC_BNZ_SN,
+  TILEPRO_OPC_BNZT_SN, TILEPRO_OPC_BGZ_SN, TILEPRO_OPC_BGZT_SN,
+  TILEPRO_OPC_BGEZ_SN, TILEPRO_OPC_BGEZT_SN, TILEPRO_OPC_BLZ_SN,
+  TILEPRO_OPC_BLZT_SN, TILEPRO_OPC_BLEZ_SN, TILEPRO_OPC_BLEZT_SN,
+  TILEPRO_OPC_BBS_SN, TILEPRO_OPC_BBST_SN, TILEPRO_OPC_BBNS_SN,
+  TILEPRO_OPC_BBNST_SN,
   BITFIELD(51, 3) /* index 860 */,
-  TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI, CHILD(869),
-  TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MFSPR,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB, TILEPRO_OPC_ADDIH, TILEPRO_OPC_ADDI,
+  CHILD(869), TILEPRO_OPC_MAXIB_U, TILEPRO_OPC_MAXIH, TILEPRO_OPC_MFSPR,
   BITFIELD(31, 2) /* index 869 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(874),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(874),
   BITFIELD(33, 2) /* index 874 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(879),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(879),
   BITFIELD(35, 2) /* index 879 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(884),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(884),
   BITFIELD(37, 2) /* index 884 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(889),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(889),
   BITFIELD(39, 2) /* index 889 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(894),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(894),
   BITFIELD(41, 2) /* index 894 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO,
   BITFIELD(51, 3) /* index 899 */,
-  TILE_OPC_MINIB_U, TILE_OPC_MINIH, TILE_OPC_MTSPR, CHILD(908),
-  TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI, TILE_OPC_SLTIB,
+  TILEPRO_OPC_MINIB_U, TILEPRO_OPC_MINIH, TILEPRO_OPC_MTSPR, CHILD(908),
+  TILEPRO_OPC_SEQIB, TILEPRO_OPC_SEQIH, TILEPRO_OPC_SEQI, TILEPRO_OPC_SLTIB,
   BITFIELD(37, 2) /* index 908 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(913),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(913),
   BITFIELD(39, 2) /* index 913 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(918),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(918),
   BITFIELD(41, 2) /* index 918 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI,
   BITFIELD(51, 3) /* index 923 */,
-  TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U, TILE_OPC_SLTI,
-  TILE_OPC_SLTI_U, TILE_OPC_XORI, TILE_OPC_LBADD, TILE_OPC_LBADD_U,
+  TILEPRO_OPC_SLTIB_U, TILEPRO_OPC_SLTIH, TILEPRO_OPC_SLTIH_U,
+  TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_XORI, TILEPRO_OPC_LBADD,
+  TILEPRO_OPC_LBADD_U,
   BITFIELD(51, 3) /* index 932 */,
-  TILE_OPC_LHADD, TILE_OPC_LHADD_U, TILE_OPC_LWADD, TILE_OPC_LWADD_NA,
-  TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD, TILE_OPC_NONE,
+  TILEPRO_OPC_LHADD, TILEPRO_OPC_LHADD_U, TILEPRO_OPC_LWADD,
+  TILEPRO_OPC_LWADD_NA, TILEPRO_OPC_SBADD, TILEPRO_OPC_SHADD,
+  TILEPRO_OPC_SWADD, TILEPRO_OPC_NONE,
   BITFIELD(51, 3) /* index 941 */,
-  TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
-  TILE_OPC_ANDI_SN, TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MFSPR,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_ADDIB_SN, TILEPRO_OPC_ADDIH_SN,
+  TILEPRO_OPC_ADDI_SN, TILEPRO_OPC_ANDI_SN, TILEPRO_OPC_MAXIB_U_SN,
+  TILEPRO_OPC_MAXIH_SN, TILEPRO_OPC_MFSPR,
   BITFIELD(51, 3) /* index 950 */,
-  TILE_OPC_MINIB_U_SN, TILE_OPC_MINIH_SN, TILE_OPC_MTSPR, CHILD(959),
-  TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN, TILE_OPC_SLTIB_SN,
+  TILEPRO_OPC_MINIB_U_SN, TILEPRO_OPC_MINIH_SN, TILEPRO_OPC_MTSPR, CHILD(959),
+  TILEPRO_OPC_SEQIB_SN, TILEPRO_OPC_SEQIH_SN, TILEPRO_OPC_SEQI_SN,
+  TILEPRO_OPC_SLTIB_SN,
   BITFIELD(37, 2) /* index 959 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(964),
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(964),
   BITFIELD(39, 2) /* index 964 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(969),
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, CHILD(969),
   BITFIELD(41, 2) /* index 969 */,
-  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+  TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN, TILEPRO_OPC_ORI_SN,
+  TILEPRO_OPC_MOVEI_SN,
   BITFIELD(51, 3) /* index 974 */,
-  TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN, TILE_OPC_SLTIH_U_SN,
-  TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_XORI_SN, TILE_OPC_LBADD_SN,
-  TILE_OPC_LBADD_U_SN,
+  TILEPRO_OPC_SLTIB_U_SN, TILEPRO_OPC_SLTIH_SN, TILEPRO_OPC_SLTIH_U_SN,
+  TILEPRO_OPC_SLTI_SN, TILEPRO_OPC_SLTI_U_SN, TILEPRO_OPC_XORI_SN,
+  TILEPRO_OPC_LBADD_SN, TILEPRO_OPC_LBADD_U_SN,
   BITFIELD(51, 3) /* index 983 */,
-  TILE_OPC_LHADD_SN, TILE_OPC_LHADD_U_SN, TILE_OPC_LWADD_SN,
-  TILE_OPC_LWADD_NA_SN, TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD,
-  TILE_OPC_NONE,
+  TILEPRO_OPC_LHADD_SN, TILEPRO_OPC_LHADD_U_SN, TILEPRO_OPC_LWADD_SN,
+  TILEPRO_OPC_LWADD_NA_SN, TILEPRO_OPC_SBADD, TILEPRO_OPC_SHADD,
+  TILEPRO_OPC_SWADD, TILEPRO_OPC_NONE,
   BITFIELD(46, 7) /* index 992 */,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1121),
-  CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1124), CHILD(1124),
-  CHILD(1124), CHILD(1124), CHILD(1127), CHILD(1127), CHILD(1127),
-  CHILD(1127), CHILD(1130), CHILD(1130), CHILD(1130), CHILD(1130),
-  CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1136),
-  CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1139), CHILD(1139),
-  CHILD(1139), CHILD(1139), CHILD(1142), CHILD(1142), CHILD(1142),
-  CHILD(1142), CHILD(1145), CHILD(1145), CHILD(1145), CHILD(1145),
-  CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1151),
-  CHILD(1242), CHILD(1290), CHILD(1323), TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1124),
+  CHILD(1124), CHILD(1124), CHILD(1124), CHILD(1127), CHILD(1127),
+  CHILD(1127), CHILD(1127), CHILD(1130), CHILD(1130), CHILD(1130),
+  CHILD(1130), CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1133),
+  CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1139),
+  CHILD(1139), CHILD(1139), CHILD(1139), CHILD(1142), CHILD(1142),
+  CHILD(1142), CHILD(1142), CHILD(1145), CHILD(1145), CHILD(1145),
+  CHILD(1145), CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1148),
+  CHILD(1151), CHILD(1242), CHILD(1290), CHILD(1323), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1121 */,
-  TILE_OPC_RLI, TILE_OPC_NONE,
+  TILEPRO_OPC_RLI, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1124 */,
-  TILE_OPC_SHLIB, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLIB, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1127 */,
-  TILE_OPC_SHLIH, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLIH, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1130 */,
-  TILE_OPC_SHLI, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLI, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1133 */,
-  TILE_OPC_SHRIB, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRIB, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1136 */,
-  TILE_OPC_SHRIH, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRIH, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1139 */,
-  TILE_OPC_SHRI, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRI, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1142 */,
-  TILE_OPC_SRAIB, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAIB, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1145 */,
-  TILE_OPC_SRAIH, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAIH, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1148 */,
-  TILE_OPC_SRAI, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAI, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 1151 */,
-  TILE_OPC_NONE, CHILD(1160), CHILD(1163), CHILD(1166), CHILD(1169),
+  TILEPRO_OPC_NONE, CHILD(1160), CHILD(1163), CHILD(1166), CHILD(1169),
   CHILD(1172), CHILD(1175), CHILD(1178),
   BITFIELD(53, 1) /* index 1160 */,
-  TILE_OPC_DRAIN, TILE_OPC_NONE,
+  TILEPRO_OPC_DRAIN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1163 */,
-  TILE_OPC_DTLBPR, TILE_OPC_NONE,
+  TILEPRO_OPC_DTLBPR, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1166 */,
-  TILE_OPC_FINV, TILE_OPC_NONE,
+  TILEPRO_OPC_FINV, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1169 */,
-  TILE_OPC_FLUSH, TILE_OPC_NONE,
+  TILEPRO_OPC_FLUSH, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1172 */,
-  TILE_OPC_FNOP, TILE_OPC_NONE,
+  TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1175 */,
-  TILE_OPC_ICOH, TILE_OPC_NONE,
+  TILEPRO_OPC_ICOH, TILEPRO_OPC_NONE,
   BITFIELD(31, 2) /* index 1178 */,
   CHILD(1183), CHILD(1211), CHILD(1239), CHILD(1239),
   BITFIELD(53, 1) /* index 1183 */,
-  CHILD(1186), TILE_OPC_NONE,
+  CHILD(1186), TILEPRO_OPC_NONE,
   BITFIELD(33, 2) /* index 1186 */,
-  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL, CHILD(1191),
+  TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, CHILD(1191),
   BITFIELD(35, 2) /* index 1191 */,
-  TILE_OPC_ILL, CHILD(1196), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1196), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(37, 2) /* index 1196 */,
-  TILE_OPC_ILL, CHILD(1201), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1201), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(39, 2) /* index 1201 */,
-  TILE_OPC_ILL, CHILD(1206), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1206), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(41, 2) /* index 1206 */,
-  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_BPT, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_BPT, TILEPRO_OPC_ILL,
   BITFIELD(53, 1) /* index 1211 */,
-  CHILD(1214), TILE_OPC_NONE,
+  CHILD(1214), TILEPRO_OPC_NONE,
   BITFIELD(33, 2) /* index 1214 */,
-  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL, CHILD(1219),
+  TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, CHILD(1219),
   BITFIELD(35, 2) /* index 1219 */,
-  TILE_OPC_ILL, CHILD(1224), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1224), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(37, 2) /* index 1224 */,
-  TILE_OPC_ILL, CHILD(1229), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1229), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(39, 2) /* index 1229 */,
-  TILE_OPC_ILL, CHILD(1234), TILE_OPC_ILL, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, CHILD(1234), TILEPRO_OPC_ILL, TILEPRO_OPC_ILL,
   BITFIELD(41, 2) /* index 1234 */,
-  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_RAISE, TILE_OPC_ILL,
+  TILEPRO_OPC_ILL, TILEPRO_OPC_ILL, TILEPRO_OPC_RAISE, TILEPRO_OPC_ILL,
   BITFIELD(53, 1) /* index 1239 */,
-  TILE_OPC_ILL, TILE_OPC_NONE,
+  TILEPRO_OPC_ILL, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 1242 */,
   CHILD(1251), CHILD(1254), CHILD(1257), CHILD(1275), CHILD(1278),
   CHILD(1281), CHILD(1284), CHILD(1287),
   BITFIELD(53, 1) /* index 1251 */,
-  TILE_OPC_INV, TILE_OPC_NONE,
+  TILEPRO_OPC_INV, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1254 */,
-  TILE_OPC_IRET, TILE_OPC_NONE,
+  TILEPRO_OPC_IRET, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1257 */,
-  CHILD(1260), TILE_OPC_NONE,
+  CHILD(1260), TILEPRO_OPC_NONE,
   BITFIELD(31, 2) /* index 1260 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1265),
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(1265),
   BITFIELD(33, 2) /* index 1265 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1270),
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(1270),
   BITFIELD(35, 2) /* index 1270 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_PREFETCH,
   BITFIELD(53, 1) /* index 1275 */,
-  TILE_OPC_LB_U, TILE_OPC_NONE,
+  TILEPRO_OPC_LB_U, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1278 */,
-  TILE_OPC_LH, TILE_OPC_NONE,
+  TILEPRO_OPC_LH, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1281 */,
-  TILE_OPC_LH_U, TILE_OPC_NONE,
+  TILEPRO_OPC_LH_U, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1284 */,
-  TILE_OPC_LW, TILE_OPC_NONE,
+  TILEPRO_OPC_LW, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1287 */,
-  TILE_OPC_MF, TILE_OPC_NONE,
+  TILEPRO_OPC_MF, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 1290 */,
   CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311),
   CHILD(1314), CHILD(1317), CHILD(1320),
   BITFIELD(53, 1) /* index 1299 */,
-  TILE_OPC_NAP, TILE_OPC_NONE,
+  TILEPRO_OPC_NAP, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1302 */,
-  TILE_OPC_NOP, TILE_OPC_NONE,
+  TILEPRO_OPC_NOP, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1305 */,
-  TILE_OPC_SWINT0, TILE_OPC_NONE,
+  TILEPRO_OPC_SWINT0, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1308 */,
-  TILE_OPC_SWINT1, TILE_OPC_NONE,
+  TILEPRO_OPC_SWINT1, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1311 */,
-  TILE_OPC_SWINT2, TILE_OPC_NONE,
+  TILEPRO_OPC_SWINT2, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1314 */,
-  TILE_OPC_SWINT3, TILE_OPC_NONE,
+  TILEPRO_OPC_SWINT3, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1317 */,
-  TILE_OPC_TNS, TILE_OPC_NONE,
+  TILEPRO_OPC_TNS, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1320 */,
-  TILE_OPC_WH64, TILE_OPC_NONE,
+  TILEPRO_OPC_WH64, TILEPRO_OPC_NONE,
   BITFIELD(43, 2) /* index 1323 */,
-  CHILD(1328), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(1328), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(45, 1) /* index 1328 */,
-  CHILD(1331), TILE_OPC_NONE,
+  CHILD(1331), TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1331 */,
-  TILE_OPC_LW_NA, TILE_OPC_NONE,
+  TILEPRO_OPC_LW_NA, TILEPRO_OPC_NONE,
   BITFIELD(46, 7) /* index 1334 */,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1463),
-  CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1466), CHILD(1466),
-  CHILD(1466), CHILD(1466), CHILD(1469), CHILD(1469), CHILD(1469),
-  CHILD(1469), CHILD(1472), CHILD(1472), CHILD(1472), CHILD(1472),
-  CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1478),
-  CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1481), CHILD(1481),
-  CHILD(1481), CHILD(1481), CHILD(1484), CHILD(1484), CHILD(1484),
-  CHILD(1484), CHILD(1487), CHILD(1487), CHILD(1487), CHILD(1487),
-  CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1151),
-  CHILD(1493), CHILD(1517), CHILD(1529), TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1466),
+  CHILD(1466), CHILD(1466), CHILD(1466), CHILD(1469), CHILD(1469),
+  CHILD(1469), CHILD(1469), CHILD(1472), CHILD(1472), CHILD(1472),
+  CHILD(1472), CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1475),
+  CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1481),
+  CHILD(1481), CHILD(1481), CHILD(1481), CHILD(1484), CHILD(1484),
+  CHILD(1484), CHILD(1484), CHILD(1487), CHILD(1487), CHILD(1487),
+  CHILD(1487), CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1490),
+  CHILD(1151), CHILD(1493), CHILD(1517), CHILD(1529), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1463 */,
-  TILE_OPC_RLI_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_RLI_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1466 */,
-  TILE_OPC_SHLIB_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLIB_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1469 */,
-  TILE_OPC_SHLIH_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLIH_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1472 */,
-  TILE_OPC_SHLI_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHLI_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1475 */,
-  TILE_OPC_SHRIB_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRIB_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1478 */,
-  TILE_OPC_SHRIH_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRIH_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1481 */,
-  TILE_OPC_SHRI_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SHRI_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1484 */,
-  TILE_OPC_SRAIB_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAIB_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1487 */,
-  TILE_OPC_SRAIH_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAIH_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1490 */,
-  TILE_OPC_SRAI_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_SRAI_SN, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 1493 */,
   CHILD(1251), CHILD(1254), CHILD(1502), CHILD(1505), CHILD(1508),
   CHILD(1511), CHILD(1514), CHILD(1287),
   BITFIELD(53, 1) /* index 1502 */,
-  TILE_OPC_LB_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LB_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1505 */,
-  TILE_OPC_LB_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LB_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1508 */,
-  TILE_OPC_LH_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LH_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1511 */,
-  TILE_OPC_LH_U_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LH_U_SN, TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1514 */,
-  TILE_OPC_LW_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LW_SN, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 1517 */,
   CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311),
   CHILD(1314), CHILD(1526), CHILD(1320),
   BITFIELD(53, 1) /* index 1526 */,
-  TILE_OPC_TNS_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_TNS_SN, TILEPRO_OPC_NONE,
   BITFIELD(43, 2) /* index 1529 */,
-  CHILD(1534), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(1534), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(45, 1) /* index 1534 */,
-  CHILD(1537), TILE_OPC_NONE,
+  CHILD(1537), TILEPRO_OPC_NONE,
   BITFIELD(53, 1) /* index 1537 */,
-  TILE_OPC_LW_NA_SN, TILE_OPC_NONE,
+  TILEPRO_OPC_LW_NA_SN, TILEPRO_OPC_NONE,
 };
 
 static const unsigned short decode_Y0_fsm[168] =
 {
   BITFIELD(27, 4) /* index 0 */,
-  TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
-  CHILD(57), CHILD(62), CHILD(67), TILE_OPC_ADDI, CHILD(72), CHILD(102),
-  TILE_OPC_SEQI, CHILD(117), TILE_OPC_SLTI, TILE_OPC_SLTI_U,
+  TILEPRO_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+  CHILD(57), CHILD(62), CHILD(67), TILEPRO_OPC_ADDI, CHILD(72), CHILD(102),
+  TILEPRO_OPC_SEQI, CHILD(117), TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U,
   BITFIELD(18, 2) /* index 17 */,
-  TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+  TILEPRO_OPC_ADD, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_SUB,
   BITFIELD(18, 2) /* index 22 */,
-  TILE_OPC_MNZ, TILE_OPC_MVNZ, TILE_OPC_MVZ, TILE_OPC_MZ,
+  TILEPRO_OPC_MNZ, TILEPRO_OPC_MVNZ, TILEPRO_OPC_MVZ, TILEPRO_OPC_MZ,
   BITFIELD(18, 2) /* index 27 */,
-  TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+  TILEPRO_OPC_AND, TILEPRO_OPC_NOR, CHILD(32), TILEPRO_OPC_XOR,
   BITFIELD(12, 2) /* index 32 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(37),
   BITFIELD(14, 2) /* index 37 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(42),
   BITFIELD(16, 2) /* index 42 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE,
   BITFIELD(18, 2) /* index 47 */,
-  TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+  TILEPRO_OPC_RL, TILEPRO_OPC_SHL, TILEPRO_OPC_SHR, TILEPRO_OPC_SRA,
   BITFIELD(18, 2) /* index 52 */,
-  TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+  TILEPRO_OPC_SLTE, TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLT, TILEPRO_OPC_SLT_U,
   BITFIELD(18, 2) /* index 57 */,
-  TILE_OPC_MULHLSA_UU, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+  TILEPRO_OPC_MULHLSA_UU, TILEPRO_OPC_S3A, TILEPRO_OPC_SEQ, TILEPRO_OPC_SNE,
   BITFIELD(18, 2) /* index 62 */,
-  TILE_OPC_MULHH_SS, TILE_OPC_MULHH_UU, TILE_OPC_MULLL_SS, TILE_OPC_MULLL_UU,
+  TILEPRO_OPC_MULHH_SS, TILEPRO_OPC_MULHH_UU, TILEPRO_OPC_MULLL_SS,
+  TILEPRO_OPC_MULLL_UU,
   BITFIELD(18, 2) /* index 67 */,
-  TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_UU, TILE_OPC_MULLLA_SS,
-  TILE_OPC_MULLLA_UU,
+  TILEPRO_OPC_MULHHA_SS, TILEPRO_OPC_MULHHA_UU, TILEPRO_OPC_MULLLA_SS,
+  TILEPRO_OPC_MULLLA_UU,
   BITFIELD(0, 2) /* index 72 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(77),
   BITFIELD(2, 2) /* index 77 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(82),
   BITFIELD(4, 2) /* index 82 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(87),
   BITFIELD(6, 2) /* index 87 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(92),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(92),
   BITFIELD(8, 2) /* index 92 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(97),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(97),
   BITFIELD(10, 2) /* index 97 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO,
   BITFIELD(6, 2) /* index 102 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(107),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(107),
   BITFIELD(8, 2) /* index 107 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(112),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(112),
   BITFIELD(10, 2) /* index 112 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI,
   BITFIELD(15, 5) /* index 117 */,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_RLI,
-  TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHLI,
-  TILE_OPC_SHLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SHRI, TILE_OPC_SHRI,
-  TILE_OPC_SHRI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI,
-  CHILD(150), CHILD(159), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_RLI, TILEPRO_OPC_RLI, TILEPRO_OPC_RLI, TILEPRO_OPC_RLI,
+  TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHLI,
+  TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI, TILEPRO_OPC_SHRI,
+  TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI, TILEPRO_OPC_SRAI,
+  CHILD(150), CHILD(159), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(12, 3) /* index 150 */,
-  TILE_OPC_NONE, TILE_OPC_BITX, TILE_OPC_BYTEX, TILE_OPC_CLZ, TILE_OPC_CTZ,
-  TILE_OPC_FNOP, TILE_OPC_NOP, TILE_OPC_PCNT,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_BITX, TILEPRO_OPC_BYTEX, TILEPRO_OPC_CLZ,
+  TILEPRO_OPC_CTZ, TILEPRO_OPC_FNOP, TILEPRO_OPC_NOP, TILEPRO_OPC_PCNT,
   BITFIELD(12, 3) /* index 159 */,
-  TILE_OPC_TBLIDXB0, TILE_OPC_TBLIDXB1, TILE_OPC_TBLIDXB2, TILE_OPC_TBLIDXB3,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_TBLIDXB0, TILEPRO_OPC_TBLIDXB1, TILEPRO_OPC_TBLIDXB2,
+  TILEPRO_OPC_TBLIDXB3, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE,
 };
 
 static const unsigned short decode_Y1_fsm[140] =
 {
   BITFIELD(59, 4) /* index 0 */,
-  TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
-  CHILD(57), TILE_OPC_ADDI, CHILD(62), CHILD(92), TILE_OPC_SEQI, CHILD(107),
-  TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+  CHILD(57), TILEPRO_OPC_ADDI, CHILD(62), CHILD(92), TILEPRO_OPC_SEQI,
+  CHILD(107), TILEPRO_OPC_SLTI, TILEPRO_OPC_SLTI_U, TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE,
   BITFIELD(49, 2) /* index 17 */,
-  TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+  TILEPRO_OPC_ADD, TILEPRO_OPC_S1A, TILEPRO_OPC_S2A, TILEPRO_OPC_SUB,
   BITFIELD(49, 2) /* index 22 */,
-  TILE_OPC_NONE, TILE_OPC_MNZ, TILE_OPC_MZ, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_MNZ, TILEPRO_OPC_MZ, TILEPRO_OPC_NONE,
   BITFIELD(49, 2) /* index 27 */,
-  TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+  TILEPRO_OPC_AND, TILEPRO_OPC_NOR, CHILD(32), TILEPRO_OPC_XOR,
   BITFIELD(43, 2) /* index 32 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(37),
   BITFIELD(45, 2) /* index 37 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, CHILD(42),
   BITFIELD(47, 2) /* index 42 */,
-  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_OR, TILEPRO_OPC_MOVE,
   BITFIELD(49, 2) /* index 47 */,
-  TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+  TILEPRO_OPC_RL, TILEPRO_OPC_SHL, TILEPRO_OPC_SHR, TILEPRO_OPC_SRA,
   BITFIELD(49, 2) /* index 52 */,
-  TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+  TILEPRO_OPC_SLTE, TILEPRO_OPC_SLTE_U, TILEPRO_OPC_SLT, TILEPRO_OPC_SLT_U,
   BITFIELD(49, 2) /* index 57 */,
-  TILE_OPC_NONE, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_S3A, TILEPRO_OPC_SEQ, TILEPRO_OPC_SNE,
   BITFIELD(31, 2) /* index 62 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(67),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(67),
   BITFIELD(33, 2) /* index 67 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(72),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(72),
   BITFIELD(35, 2) /* index 72 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(77),
   BITFIELD(37, 2) /* index 77 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(82),
   BITFIELD(39, 2) /* index 82 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, CHILD(87),
   BITFIELD(41, 2) /* index 87 */,
-  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_ANDI, TILEPRO_OPC_INFO,
   BITFIELD(37, 2) /* index 92 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(97),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(97),
   BITFIELD(39, 2) /* index 97 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(102),
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, CHILD(102),
   BITFIELD(41, 2) /* index 102 */,
-  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_ORI, TILEPRO_OPC_MOVEI,
   BITFIELD(48, 3) /* index 107 */,
-  TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SRAI,
-  CHILD(116), TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_RLI, TILEPRO_OPC_SHLI, TILEPRO_OPC_SHRI,
+  TILEPRO_OPC_SRAI, CHILD(116), TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(43, 3) /* index 116 */,
-  TILE_OPC_NONE, CHILD(125), CHILD(130), CHILD(135), TILE_OPC_NONE,
-  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NONE, CHILD(125), CHILD(130), CHILD(135), TILEPRO_OPC_NONE,
+  TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(46, 2) /* index 125 */,
-  TILE_OPC_FNOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_FNOP, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(46, 2) /* index 130 */,
-  TILE_OPC_ILL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_ILL, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
   BITFIELD(46, 2) /* index 135 */,
-  TILE_OPC_NOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILEPRO_OPC_NOP, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE, TILEPRO_OPC_NONE,
 };
 
 static const unsigned short decode_Y2_fsm[24] =
 {
   BITFIELD(56, 3) /* index 0 */,
-  CHILD(9), TILE_OPC_LB_U, TILE_OPC_LH, TILE_OPC_LH_U, TILE_OPC_LW,
-  TILE_OPC_SB, TILE_OPC_SH, TILE_OPC_SW,
+  CHILD(9), TILEPRO_OPC_LB_U, TILEPRO_OPC_LH, TILEPRO_OPC_LH_U,
+  TILEPRO_OPC_LW, TILEPRO_OPC_SB, TILEPRO_OPC_SH, TILEPRO_OPC_SW,
   BITFIELD(20, 2) /* index 9 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(14),
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(14),
   BITFIELD(22, 2) /* index 14 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(19),
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, CHILD(19),
   BITFIELD(24, 2) /* index 19 */,
-  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+  TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_LB, TILEPRO_OPC_PREFETCH,
 };
 
 #undef BITFIELD
 #undef CHILD
 const unsigned short * const
-tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS] =
+tilepro_bundle_decoder_fsms[TILEPRO_NUM_PIPELINE_ENCODINGS] =
 {
   decode_X0_fsm,
   decode_X1_fsm,
@@ -2191,220 +2297,220 @@
   decode_Y1_fsm,
   decode_Y2_fsm
 };
-const struct tile_operand tile_operands[43] =
+const struct tilepro_operand tilepro_operands[43] =
 {
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_X0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_X0),
     8, 1, 0, 0, 0, 0,
     create_Imm8_X0, get_Imm8_X0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_X1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_X1),
     8, 1, 0, 0, 0, 0,
     create_Imm8_X1, get_Imm8_X1
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_Y0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_Y0),
     8, 1, 0, 0, 0, 0,
     create_Imm8_Y0, get_Imm8_Y0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_Y1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM8_Y1),
     8, 1, 0, 0, 0, 0,
     create_Imm8_Y1, get_Imm8_Y1
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM16_X0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM16_X0),
     16, 1, 0, 0, 0, 0,
     create_Imm16_X0, get_Imm16_X0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM16_X1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_IMM16_X1),
     16, 1, 0, 0, 0, 0,
     create_Imm16_X1, get_Imm16_X1
   },
   {
-    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_JOFFLONG_X1),
-    29, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(TILEPRO_JOFFLONG_X1),
+    29, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
     create_JOffLong_X1, get_JOffLong_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 0, 1, 0, 0,
     create_Dest_X0, get_Dest_X0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcA_X0, get_SrcA_X0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 0, 1, 0, 0,
     create_Dest_X1, get_Dest_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcA_X1, get_SrcA_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 0, 1, 0, 0,
     create_Dest_Y0, get_Dest_Y0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcA_Y0, get_SrcA_Y0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 0, 1, 0, 0,
     create_Dest_Y1, get_Dest_Y1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcA_Y1, get_SrcA_Y1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcA_Y2, get_SrcA_Y2
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcB_X0, get_SrcB_X0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcB_X1, get_SrcB_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcB_Y0, get_SrcB_Y0
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcB_Y1, get_SrcB_Y1
   },
   {
-    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_BROFF_X1),
-    17, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(TILEPRO_BROFF_X1),
+    17, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
     create_BrOff_X1, get_BrOff_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 1, 0, 0,
     create_Dest_X0, get_Dest_X0
   },
   {
-    TILE_OP_TYPE_ADDRESS, BFD_RELOC(NONE),
-    28, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(NONE),
+    28, 1, 0, 0, 1, TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
     create_JOff_X1, get_JOff_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 0, 1, 0, 0,
     create_SrcBDest_Y2, get_SrcBDest_Y2
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 1, 0, 0,
     create_SrcA_X1, get_SrcA_X1
   },
   {
-    TILE_OP_TYPE_SPR, BFD_RELOC(TILE_MF_IMM15_X1),
+    TILEPRO_OP_TYPE_SPR, BFD_RELOC(TILEPRO_MF_IMM15_X1),
     15, 0, 0, 0, 0, 0,
     create_MF_Imm15_X1, get_MF_Imm15_X1
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMSTART_X0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMSTART_X0),
     5, 0, 0, 0, 0, 0,
     create_MMStart_X0, get_MMStart_X0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMEND_X0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMEND_X0),
     5, 0, 0, 0, 0, 0,
     create_MMEnd_X0, get_MMEnd_X0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMSTART_X1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMSTART_X1),
     5, 0, 0, 0, 0, 0,
     create_MMStart_X1, get_MMStart_X1
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMEND_X1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_MMEND_X1),
     5, 0, 0, 0, 0, 0,
     create_MMEnd_X1, get_MMEnd_X1
   },
   {
-    TILE_OP_TYPE_SPR, BFD_RELOC(TILE_MT_IMM15_X1),
+    TILEPRO_OP_TYPE_SPR, BFD_RELOC(TILEPRO_MT_IMM15_X1),
     15, 0, 0, 0, 0, 0,
     create_MT_Imm15_X1, get_MT_Imm15_X1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 1, 0, 0,
     create_Dest_Y0, get_Dest_Y0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_X0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_X0),
     5, 0, 0, 0, 0, 0,
     create_ShAmt_X0, get_ShAmt_X0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_X1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_X1),
     5, 0, 0, 0, 0, 0,
     create_ShAmt_X1, get_ShAmt_X1
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_Y0),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_Y0),
     5, 0, 0, 0, 0, 0,
     create_ShAmt_Y0, get_ShAmt_Y0
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_Y1),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_SHAMT_Y1),
     5, 0, 0, 0, 0, 0,
     create_ShAmt_Y1, get_ShAmt_Y1
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     6, 0, 1, 0, 0, 0,
     create_SrcBDest_Y2, get_SrcBDest_Y2
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEPRO_DEST_IMM8_X1),
     8, 1, 0, 0, 0, 0,
     create_Dest_Imm8_X1, get_Dest_Imm8_X1
   },
   {
-    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_SN_BROFF),
-    10, 1, 0, 0, 1, TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES,
+    TILEPRO_OP_TYPE_ADDRESS, BFD_RELOC(NONE),
+    10, 1, 0, 0, 1, TILEPRO_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES,
     create_BrOff_SN, get_BrOff_SN
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SN_UIMM8),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
     8, 0, 0, 0, 0, 0,
     create_Imm8_SN, get_Imm8_SN
   },
   {
-    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SN_IMM8),
+    TILEPRO_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
     8, 1, 0, 0, 0, 0,
     create_Imm8_SN, get_Imm8_SN
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     2, 0, 0, 1, 0, 0,
     create_Dest_SN, get_Dest_SN
   },
   {
-    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    TILEPRO_OP_TYPE_REGISTER, BFD_RELOC(NONE),
     2, 0, 1, 0, 0, 0,
     create_Src_SN, get_Src_SN
   }
@@ -2416,10 +2522,10 @@
 /* Given a set of bundle bits and a specific pipe, returns which
  * instruction the bundle contains in that pipe.
  */
-const struct tile_opcode *
-find_opcode(tile_bundle_bits bits, tile_pipeline pipe)
+const struct tilepro_opcode *
+find_opcode(tilepro_bundle_bits bits, tilepro_pipeline pipe)
 {
-  const unsigned short *table = tile_bundle_decoder_fsms[pipe];
+  const unsigned short *table = tilepro_bundle_decoder_fsms[pipe];
   int index = 0;
 
   while (1)
@@ -2429,51 +2535,51 @@
       ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6);
 
     unsigned short next = table[index + 1 + bitfield];
-    if (next <= TILE_OPC_NONE)
-      return &tile_opcodes[next];
+    if (next <= TILEPRO_OPC_NONE)
+      return &tilepro_opcodes[next];
 
-    index = next - TILE_OPC_NONE;
+    index = next - TILEPRO_OPC_NONE;
   }
 }
 
 
 int
-parse_insn_tile(tile_bundle_bits bits,
-                unsigned int pc,
-                struct tile_decoded_instruction
-                decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE])
+parse_insn_tilepro(tilepro_bundle_bits bits,
+                   unsigned int pc,
+                   struct tilepro_decoded_instruction
+                   decoded[TILEPRO_MAX_INSTRUCTIONS_PER_BUNDLE])
 {
   int num_instructions = 0;
   int pipe;
 
   int min_pipe, max_pipe;
-  if ((bits & TILE_BUNDLE_Y_ENCODING_MASK) == 0)
+  if ((bits & TILEPRO_BUNDLE_Y_ENCODING_MASK) == 0)
   {
-    min_pipe = TILE_PIPELINE_X0;
-    max_pipe = TILE_PIPELINE_X1;
+    min_pipe = TILEPRO_PIPELINE_X0;
+    max_pipe = TILEPRO_PIPELINE_X1;
   }
   else
   {
-    min_pipe = TILE_PIPELINE_Y0;
-    max_pipe = TILE_PIPELINE_Y2;
+    min_pipe = TILEPRO_PIPELINE_Y0;
+    max_pipe = TILEPRO_PIPELINE_Y2;
   }
 
   /* For each pipe, find an instruction that fits. */
   for (pipe = min_pipe; pipe <= max_pipe; pipe++)
   {
-    const struct tile_opcode *opc;
-    struct tile_decoded_instruction *d;
+    const struct tilepro_opcode *opc;
+    struct tilepro_decoded_instruction *d;
     int i;
 
     d = &decoded[num_instructions++];
-    opc = find_opcode (bits, (tile_pipeline)pipe);
+    opc = find_opcode (bits, (tilepro_pipeline)pipe);
     d->opcode = opc;
 
     /* Decode each operand, sign extending, etc. as appropriate. */
     for (i = 0; i < opc->num_operands; i++)
     {
-      const struct tile_operand *op =
-        &tile_operands[opc->operands[pipe][i]];
+      const struct tilepro_operand *op =
+        &tilepro_operands[opc->operands[pipe][i]];
       int opval = op->extract (bits);
       if (op->is_signed)
       {
@@ -2483,9 +2589,9 @@
       }
 
       /* Adjust PC-relative scaled branch offsets. */
-      if (op->type == TILE_OP_TYPE_ADDRESS)
+      if (op->type == TILEPRO_OP_TYPE_ADDRESS)
       {
-        opval *= TILE_BUNDLE_SIZE_IN_BYTES;
+        opval *= TILEPRO_BUNDLE_SIZE_IN_BYTES;
         opval += (int)pc;
       }
 
diff --git a/arch/tile/kernel/tile-desc_64.c b/arch/tile/kernel/tile-desc_64.c
index d57007be..65b5f8a 100644
--- a/arch/tile/kernel/tile-desc_64.c
+++ b/arch/tile/kernel/tile-desc_64.c
@@ -1,3 +1,23 @@
+/* TILE-Gx opcode information.
+ *
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ *
+ *
+ *
+ *
+ */
+
 /* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */
 #define BFD_RELOC(x) -1
 
@@ -6,10 +26,8 @@
 #define TREG_SN 56
 #define TREG_ZERO 63
 
-/* FIXME: Rename this. */
-#include <asm/opcode-tile_64.h>
-
 #include <linux/stddef.h>
+#include <asm/tile-desc.h>
 
 const struct tilegx_opcode tilegx_opcodes[334] =
 {
@@ -2040,12 +2058,12 @@
     create_BrOff_X1, get_BrOff_X1
   },
   {
-    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMSTART_X0),
     6, 0, 0, 0, 0, 0,
     create_BFStart_X0, get_BFStart_X0
   },
   {
-    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
+    TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_MMEND_X0),
     6, 0, 0, 0, 0, 0,
     create_BFEnd_X0, get_BFEnd_X0
   },
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index f9803df..4f47b8a 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -19,13 +19,12 @@
 #include <linux/reboot.h>
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
-#include <asm/opcode-tile.h>
-#include <asm/opcode_constants.h>
 #include <asm/stack.h>
 #include <asm/traps.h>
 
 #include <arch/interrupts.h>
 #include <arch/spr_def.h>
+#include <arch/opcode.h>
 
 void __init trap_init(void)
 {
@@ -135,7 +134,7 @@
 	if (get_UnaryOpcodeExtension_X1(bundle) != ILL_UNARY_OPCODE_X1)
 		return 0;
 #else
-	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK)
+	if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK)
 		return 0;
 	if (get_Opcode_X1(bundle) != SHUN_0_OPCODE_X1)
 		return 0;
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index 49284fa..a87d2a8 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -79,8 +79,6 @@
 int64_t __moddi3(int64_t dividend, int64_t divisor);
 EXPORT_SYMBOL(__moddi3);
 #ifndef __tilegx__
-uint64_t __ll_mul(uint64_t n0, uint64_t n1);
-EXPORT_SYMBOL(__ll_mul);
 int64_t __muldi3(int64_t, int64_t);
 EXPORT_SYMBOL(__muldi3);
 uint64_t __lshrdi3(uint64_t, unsigned int);
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index e57dcce..942ed617 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -237,13 +237,13 @@
 
 config I2C_BATTERY_BQ27200
 	tristate "I2C Battery BQ27200 Support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select POWER_SUPPLY
 	select BATTERY_BQ27x00
 
 config I2C_EEPROM_AT24
 	tristate "I2C EEPROMs AT24 support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select MISC_DEVICES
 	select EEPROM_AT24
 
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
index ae2ec33..1a36262 100644
--- a/arch/unicore32/Kconfig.debug
+++ b/arch/unicore32/Kconfig.debug
@@ -44,18 +44,4 @@
 	  Say Y here if you want the debug print routines to direct their
 	  output to the UniCore On-Chip-Debugger channel using CP #1.
 
-config DEBUG_OCD_BREAKPOINT
-	bool "Breakpoint support via On-Chip-Debugger"
-	depends on DEBUG_OCD
-
-config DEBUG_UART
-	int "Kernel low-level debugging messages via serial port"
-	depends on DEBUG_LL
-	range 0 1
-	default "0"
-	help
-	  Choice for UART for kernel low-level using PKUnity UARTS,
-	  should be between zero and one. The port must have been
-	  initialised by the boot-loader before use.
-
 endmenu
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
index b0954a2..950a9af 100644
--- a/arch/unicore32/boot/compressed/Makefile
+++ b/arch/unicore32/boot/compressed/Makefile
@@ -10,8 +10,8 @@
 # Copyright (C) 2001~2010 GUAN Xue-tao
 #
 
-EXTRA_CFLAGS	:= -fpic -fno-builtin
-EXTRA_AFLAGS	:= -Wa,-march=all
+ccflags-y	:= -fpic -fno-builtin
+asflags-y	:= -Wa,-march=all
 
 OBJS		:= misc.o
 
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
index 1628a63..401f597 100644
--- a/arch/unicore32/include/asm/bitops.h
+++ b/arch/unicore32/include/asm/bitops.h
@@ -13,12 +13,6 @@
 #ifndef __UNICORE_BITOPS_H__
 #define __UNICORE_BITOPS_H__
 
-#define find_next_bit		__uc32_find_next_bit
-#define find_next_zero_bit	__uc32_find_next_zero_bit
-
-#define find_first_bit		__uc32_find_first_bit
-#define find_first_zero_bit	__uc32_find_first_zero_bit
-
 #define _ASM_GENERIC_BITOPS_FLS_H_
 #define _ASM_GENERIC_BITOPS___FLS_H_
 #define _ASM_GENERIC_BITOPS_FFS_H_
@@ -44,4 +38,10 @@
 
 #include <asm-generic/bitops.h>
 
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit		find_next_bit
+#define find_next_zero_bit	find_next_zero_bit
+#define find_first_bit		find_first_bit
+#define find_first_zero_bit	find_first_zero_bit
+
 #endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
index e11cb07..f0d780a 100644
--- a/arch/unicore32/include/asm/processor.h
+++ b/arch/unicore32/include/asm/processor.h
@@ -53,7 +53,6 @@
 #define start_thread(regs, pc, sp)					\
 ({									\
 	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	regs->UCreg_asr = USER_MODE;					\
 	regs->UCreg_pc = pc & ~1;	/* pc */                        \
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
index a897080..d98bd81 100644
--- a/arch/unicore32/kernel/ksyms.c
+++ b/arch/unicore32/kernel/ksyms.c
@@ -24,8 +24,8 @@
 
 #include "ksyms.h"
 
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
 
 EXPORT_SYMBOL(__backtrace);
 
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
index c360ce9..c777462 100644
--- a/arch/unicore32/lib/findbit.S
+++ b/arch/unicore32/lib/findbit.S
@@ -17,7 +17,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -29,13 +29,14 @@
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_zero_bit)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -47,14 +48,14 @@
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit
  *		(const unsigned long *addr, unsigned int maxbit);
  */
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -66,13 +67,14 @@
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_bit)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -83,7 +85,7 @@
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
 
 /*
  * One or more bits in the LSB of r3 are assumed to be set.
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
index 2d3e711..3b379cd 100644
--- a/arch/unicore32/mm/init.c
+++ b/arch/unicore32/mm/init.c
@@ -20,6 +20,7 @@
 #include <linux/memblock.h>
 #include <linux/sort.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <asm/sections.h>
 #include <asm/setup.h>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 77f7a38..cb9a104 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -194,9 +194,6 @@
 config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
-config HAVE_CPUMASK_OF_CPU_MAP
-	def_bool X86_64_SMP
-
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
 
diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c
index b0b6950..8efcf42 100644
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -3,6 +3,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <crypto/aes.h>
 #include <asm/aes.h>
 
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index feee8ff..545d0ce 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -22,6 +22,7 @@
 #include <linux/hardirq.h>
 #include <linux/types.h>
 #include <linux/crypto.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <crypto/algapi.h>
 #include <crypto/aes.h>
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9b7273c..1a6c09a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -49,6 +49,7 @@
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
 
 #ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 29f6679..4420993 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_INTEL_SCU_IPC_H_
 #define  _ASM_X86_INTEL_SCU_IPC_H_
 
+#include <linux/notifier.h>
+
 #define IPCMSG_VRTC	0xFA	 /* Set vRTC device */
 
 /* Command id associated with message IPCMSG_VRTC */
@@ -44,4 +46,24 @@
 /* Update FW version */
 int intel_scu_ipc_fw_update(u8 *buffer, u32 length);
 
+extern struct blocking_notifier_head intel_scu_notifier;
+
+static inline void intel_scu_notifier_add(struct notifier_block *nb)
+{
+	blocking_notifier_chain_register(&intel_scu_notifier, nb);
+}
+
+static inline void intel_scu_notifier_remove(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
+}
+
+static inline int intel_scu_notifier_post(unsigned long v, void *p)
+{
+	return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+}
+
+#define		SCU_AVAILABLE		1
+#define		SCU_DOWN		2
+
 #endif
diff --git a/arch/x86/include/asm/mach_traps.h b/arch/x86/include/asm/mach_traps.h
index 72a8b52..a01e7ec7 100644
--- a/arch/x86/include/asm/mach_traps.h
+++ b/arch/x86/include/asm/mach_traps.h
@@ -17,7 +17,7 @@
 #define NMI_REASON_CLEAR_IOCHK	0x08
 #define NMI_REASON_CLEAR_MASK	0x0f
 
-static inline unsigned char get_nmi_reason(void)
+static inline unsigned char default_get_nmi_reason(void)
 {
 	return inb(NMI_REASON_PORT);
 }
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index c9321f3..0e8ae57 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -201,7 +201,10 @@
 void mce_notify_process(void);
 
 DECLARE_PER_CPU(struct mce, injectm);
-extern struct file_operations mce_chrdev_ops;
+
+extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
+				    const char __user *ubuf,
+				    size_t usize, loff_t *off));
 
 /*
  * Exception handler
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 719f00b..e628312 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -44,6 +44,13 @@
 
 extern enum mrst_timer_options mrst_timer_options;
 
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU         83200
+#define PENWELL_FSB_FREQ_100SKU        99840
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index c2ff2a1..2d2f01c 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -401,6 +401,7 @@
 extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
 
 void default_idle(void);
+bool set_pm_idle_to_default(void);
 
 void stop_this_cpu(void *dummy);
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index d3d8590..1971e65 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -152,6 +152,7 @@
 /**
  * struct x86_platform_ops - platform specific runtime functions
  * @calibrate_tsc:		calibrate TSC
+ * @wallclock_init:		init the wallclock device
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
@@ -160,11 +161,13 @@
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
+	void (*wallclock_init)(void);
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long nowtime);
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
 	void (*nmi_init)(void);
+	unsigned char (*get_nmi_reason)(void);
 	int (*i8042_detect)(void);
 };
 
diff --git a/arch/x86/include/asm/xen/grant_table.h b/arch/x86/include/asm/xen/grant_table.h
deleted file mode 100644
index fdbbb45..0000000
--- a/arch/x86/include/asm/xen/grant_table.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_X86_XEN_GRANT_TABLE_H
-#define _ASM_X86_XEN_GRANT_TABLE_H
-
-#define xen_alloc_vm_area(size)	alloc_vm_area(size)
-#define xen_free_vm_area(area)	free_vm_area(area)
-
-#endif /* _ASM_X86_XEN_GRANT_TABLE_H */
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 417777d..5728852 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -47,6 +47,7 @@
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
 #include <xen/interface/physdev.h>
+#include <xen/interface/platform.h>
 
 /*
  * The hypercall asms have to meet several constraints:
@@ -301,6 +302,13 @@
 }
 
 static inline int
+HYPERVISOR_dom0_op(struct xen_platform_op *platform_op)
+{
+	platform_op->interface_version = XENPF_INTERFACE_VERSION;
+	return _hypercall1(int, dom0_op, platform_op);
+}
+
+static inline int
 HYPERVISOR_set_debugreg(int reg, unsigned long value)
 {
 	return _hypercall2(int, set_debugreg, reg, value);
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index 5d4922a..a1f2db5 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -55,6 +55,7 @@
 DEFINE_GUEST_HANDLE(int);
 DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
+DEFINE_GUEST_HANDLE(uint64_t);
 #endif
 
 #ifndef HYPERVISOR_VIRT_START
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index c638228..1f84794 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -738,5 +738,5 @@
 
 	atomic_set(&stop_machine_first, 1);
 	wrote_text = 0;
-	__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+	__stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
 }
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a2fd72e..f98d84c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -186,7 +186,7 @@
 	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
 };
 
-static unsigned int calibration_result;
+unsigned int lapic_timer_frequency = 0;
 
 static void apic_pm_activate(void);
 
@@ -454,7 +454,7 @@
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
+		__setup_APIC_LVTT(lapic_timer_frequency,
 				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
@@ -638,6 +638,25 @@
 	long delta, deltatsc;
 	int pm_referenced = 0;
 
+	/**
+	 * check if lapic timer has already been calibrated by platform
+	 * specific routine, such as tsc calibration code. if so, we just fill
+	 * in the clockevent structure and return.
+	 */
+
+	if (lapic_timer_frequency) {
+		apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
+				lapic_timer_frequency);
+		lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR,
+					TICK_NSEC, lapic_clockevent.shift);
+		lapic_clockevent.max_delta_ns =
+			clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+		lapic_clockevent.min_delta_ns =
+			clockevent_delta2ns(0xF, &lapic_clockevent);
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+		return 0;
+	}
+
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -679,12 +698,12 @@
 	lapic_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
-	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+	lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
 
 	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
 	apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
 	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
-		    calibration_result);
+		    lapic_timer_frequency);
 
 	if (cpu_has_tsc) {
 		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
@@ -695,13 +714,13 @@
 
 	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
 		    "%u.%04u MHz.\n",
-		    calibration_result / (1000000 / HZ),
-		    calibration_result % (1000000 / HZ));
+		    lapic_timer_frequency / (1000000 / HZ),
+		    lapic_timer_frequency % (1000000 / HZ));
 
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
-	if (calibration_result < (1000000 / HZ)) {
+	if (lapic_timer_frequency < (1000000 / HZ)) {
 		local_irq_enable();
 		pr_warning("APIC frequency too slow, disabling apic timer\n");
 		return -1;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3c31fa9..6d939d7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -193,10 +193,8 @@
 	struct irq_cfg *cfg;
 	int count, node, i;
 
-	if (!legacy_pic->nr_legacy_irqs) {
-		nr_irqs_gsi = 0;
+	if (!legacy_pic->nr_legacy_irqs)
 		io_apic_irqs = ~0UL;
-	}
 
 	for (i = 0; i < nr_ioapics; i++) {
 		ioapics[i].saved_registers =
@@ -1696,6 +1694,7 @@
 	int ioapic_idx;
 	struct irq_cfg *cfg;
 	unsigned int irq;
+	struct irq_chip *chip;
 
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
@@ -1716,6 +1715,10 @@
 	for_each_active_irq(irq) {
 		struct irq_pin_list *entry;
 
+		chip = irq_get_chip(irq);
+		if (chip != &ioapic_chip)
+			continue;
+
 		cfg = irq_get_chip_data(irq);
 		if (!cfg)
 			continue;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 46ae4f6..0bab2b1 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/elf.h>
@@ -441,8 +442,6 @@
 
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
-	u32 dummy;
-
 	early_init_amd_mc(c);
 
 	/*
@@ -472,12 +471,12 @@
 			set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
 	}
 #endif
-
-	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 {
+	u32 dummy;
+
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
@@ -656,6 +655,8 @@
 			checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
 		}
 	}
+
+	rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
index 83930de..507ea58 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-apei.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -28,6 +28,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/acpi.h>
 #include <linux/cper.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 6199232..319882e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -208,7 +208,7 @@
 	if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
 		return -ENOMEM;
 	printk(KERN_INFO "Machine check injector initialized\n");
-	mce_chrdev_ops.write = mce_write;
+	register_mce_write_callback(mce_write);
 	register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0,
 				"mce_notify");
 	return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 864830e..2af127d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -37,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/debugfs.h>
 #include <linux/irq_work.h>
+#include <linux/export.h>
 
 #include <asm/processor.h>
 #include <asm/mce.h>
@@ -1633,16 +1634,35 @@
 	}
 }
 
-/* Modified in mce-inject.c, so not static or const */
-struct file_operations mce_chrdev_ops = {
+static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf,
+			    size_t usize, loff_t *off);
+
+void register_mce_write_callback(ssize_t (*fn)(struct file *filp,
+			     const char __user *ubuf,
+			     size_t usize, loff_t *off))
+{
+	mce_write = fn;
+}
+EXPORT_SYMBOL_GPL(register_mce_write_callback);
+
+ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf,
+			 size_t usize, loff_t *off)
+{
+	if (mce_write)
+		return mce_write(filp, ubuf, usize, off);
+	else
+		return -EINVAL;
+}
+
+static const struct file_operations mce_chrdev_ops = {
 	.open			= mce_chrdev_open,
 	.release		= mce_chrdev_release,
 	.read			= mce_chrdev_read,
+	.write			= mce_chrdev_write,
 	.poll			= mce_chrdev_poll,
 	.unlocked_ioctl		= mce_chrdev_ioctl,
 	.llseek			= no_llseek,
 };
-EXPORT_SYMBOL_GPL(mce_chrdev_ops);
 
 static struct miscdevice mce_chrdev_device = {
 	MISC_MCELOG_MINOR,
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 27c6251..787e06c 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/percpu.h>
+#include <linux/export.h>
 #include <linux/sysdev.h>
 #include <linux/types.h>
 #include <linux/init.h>
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index e09ca20..2be5ebe 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <asm/hardirq.h>
 #include <asm/apic.h>
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index a621f34..5282179 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -2,6 +2,7 @@
  * Architecture specific OF callbacks.
  */
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 3e2ef84..303a0e4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/crash_dump.h>
+#include <linux/export.h>
 #include <linux/bootmem.h>
 #include <linux/pfn.h>
 #include <linux/suspend.h>
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 4aecc54..b946a9e 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -1,6 +1,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 6c0802e..429e0c9 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -9,6 +9,7 @@
 #include <linux/smp.h>
 #include <linux/ftrace.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include <asm/apic.h>
 #include <asm/io_apic.h>
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index cacdd46..ea9d5f2f 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -24,8 +24,9 @@
 	} __attribute__((packed));
 };
 
-void arch_jump_label_transform(struct jump_entry *entry,
-			       enum jump_label_type type)
+static void __jump_label_transform(struct jump_entry *entry,
+				   enum jump_label_type type,
+				   void *(*poker)(void *, const void *, size_t))
 {
 	union jump_code_union code;
 
@@ -35,17 +36,24 @@
 				(entry->code + JUMP_LABEL_NOP_SIZE);
 	} else
 		memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
+
+	(*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+	__jump_label_transform(entry, type, text_poke_smp);
 	mutex_unlock(&text_mutex);
 	put_online_cpus();
 }
 
-void __init_or_module arch_jump_label_text_poke_early(jump_label_t addr)
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type)
 {
-	text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5],
-			JUMP_LABEL_NOP_SIZE);
+	__jump_label_transform(entry, type, text_poke_early);
 }
 
 #endif
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index c1a0188..44842d7 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -74,9 +74,10 @@
 	struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
 
-	src = &get_cpu_var(hv_clock);
+	preempt_disable_notrace();
+	src = &__get_cpu_var(hv_clock);
 	ret = pvclock_clocksource_read(src);
-	put_cpu_var(hv_clock);
+	preempt_enable_notrace();
 	return ret;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 7ec5bd1..e88f37b 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/hardirq.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <linux/mca.h>
 
@@ -28,6 +29,7 @@
 #include <asm/traps.h>
 #include <asm/mach_traps.h>
 #include <asm/nmi.h>
+#include <asm/x86_init.h>
 
 #define NMI_MAX_NAMELEN	16
 struct nmiaction {
@@ -347,7 +349,7 @@
 
 	/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
 	raw_spin_lock(&nmi_reason_lock);
-	reason = get_nmi_reason();
+	reason = x86_platform.get_nmi_reason();
 
 	if (reason & NMI_REASON_MASK) {
 		if (reason & NMI_REASON_SERR)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 6228720..80dc793 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -1,6 +1,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/dmar.h>
+#include <linux/export.h>
 #include <linux/bootmem.h>
 #include <linux/gfp.h>
 #include <linux/pci.h>
diff --git a/arch/x86/kernel/probe_roms.c b/arch/x86/kernel/probe_roms.c
index 6322803..34e06e8 100644
--- a/arch/x86/kernel/probe_roms.c
+++ b/arch/x86/kernel/probe_roms.c
@@ -10,9 +10,9 @@
 #include <linux/dmi.h>
 #include <linux/pfn.h>
 #include <linux/pci.h>
+#include <linux/export.h>
+
 #include <asm/pci-direct.h>
-
-
 #include <asm/e820.h>
 #include <asm/mmzone.h>
 #include <asm/setup.h>
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index b9b3b1a..ee5d4fb 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -403,6 +403,14 @@
 EXPORT_SYMBOL(default_idle);
 #endif
 
+bool set_pm_idle_to_default(void)
+{
+	bool ret = !!pm_idle;
+
+	pm_idle = default_idle;
+
+	return ret;
+}
 void stop_this_cpu(void *dummy)
 {
 	local_irq_disable();
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index ccdbc16..348ce01 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -5,6 +5,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/acpi.h>
 #include <linux/bcd.h>
+#include <linux/export.h>
 #include <linux/pnp.h>
 #include <linux/of.h>
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index afaf384..cf0ef98 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1045,6 +1045,8 @@
 
 	x86_init.timers.wallclock_init();
 
+	x86_platform.wallclock_init();
+
 	mcheck_init();
 
 	arch_init_ideal_nops();
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 013e7eb..16204dc 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/cache.h>
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index e07a2fc..e2410e2 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -22,6 +22,7 @@
 #include <linux/dma_remapping.h>
 #include <linux/init_task.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/init.h>
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index 5a64d05..dd5fbf4 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -13,6 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/i8253.h>
 #include <linux/time.h>
+#include <linux/export.h>
 #include <linux/mca.h>
 
 #include <asm/vsyscall.h>
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 8927486..76ee977 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -26,6 +26,7 @@
  * Send feedback to <colpatch@us.ibm.com>
  */
 #include <linux/nodemask.h>
+#include <linux/export.h>
 #include <linux/mmzone.h>
 #include <linux/init.h>
 #include <linux/smp.h>
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index b56c65de..e4d4a22 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -25,6 +25,7 @@
 #include <linux/seqlock.h>
 #include <linux/jiffies.h>
 #include <linux/sysctl.h>
+#include <linux/topology.h>
 #include <linux/clocksource.h>
 #include <linux/getcpu.h>
 #include <linux/cpu.h>
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 6f164bd..c1d6cd5 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -21,12 +21,14 @@
 #include <asm/pat.h>
 #include <asm/tsc.h>
 #include <asm/iommu.h>
+#include <asm/mach_traps.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
 void __init x86_init_pgd_noop(pgd_t *unused) { }
 int __init iommu_init_noop(void) { return 0; }
 void iommu_shutdown_noop(void) { }
+void wallclock_init_noop(void) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -97,11 +99,13 @@
 
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
+	.wallclock_init			= wallclock_init_noop,
 	.get_wallclock			= mach_get_cmos_time,
 	.set_wallclock			= mach_set_rtc_mmss,
 	.iommu_shutdown			= iommu_shutdown_noop,
 	.is_untracked_pat_range		= is_ISA_range,
 	.nmi_init			= default_nmi_init,
+	.get_nmi_reason			= default_get_nmi_reason,
 	.i8042_detect			= default_i8042_detect
 };
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index a0d6bd9..579a0b5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -39,6 +39,7 @@
 #include <asm/mce.h>
 #include <asm/i387.h>
 #include <asm/xcr.h>
+#include <asm/perf_event.h>
 
 #include "trace.h"
 
@@ -118,7 +119,7 @@
 static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
 module_param(ple_window, int, S_IRUGO);
 
-#define NR_AUTOLOAD_MSRS 1
+#define NR_AUTOLOAD_MSRS 8
 #define VMCS02_POOL_SIZE 1
 
 struct vmcs {
@@ -622,6 +623,7 @@
 static unsigned long *vmx_msr_bitmap_longmode;
 
 static bool cpu_has_load_ia32_efer;
+static bool cpu_has_load_perf_global_ctrl;
 
 static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
 static DEFINE_SPINLOCK(vmx_vpid_lock);
@@ -1191,15 +1193,34 @@
 	vmcs_write32(EXCEPTION_BITMAP, eb);
 }
 
+static void clear_atomic_switch_msr_special(unsigned long entry,
+		unsigned long exit)
+{
+	vmcs_clear_bits(VM_ENTRY_CONTROLS, entry);
+	vmcs_clear_bits(VM_EXIT_CONTROLS, exit);
+}
+
 static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
 {
 	unsigned i;
 	struct msr_autoload *m = &vmx->msr_autoload;
 
-	if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
-		vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
-		vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
-		return;
+	switch (msr) {
+	case MSR_EFER:
+		if (cpu_has_load_ia32_efer) {
+			clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+					VM_EXIT_LOAD_IA32_EFER);
+			return;
+		}
+		break;
+	case MSR_CORE_PERF_GLOBAL_CTRL:
+		if (cpu_has_load_perf_global_ctrl) {
+			clear_atomic_switch_msr_special(
+					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+			return;
+		}
+		break;
 	}
 
 	for (i = 0; i < m->nr; ++i)
@@ -1215,25 +1236,55 @@
 	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
 }
 
+static void add_atomic_switch_msr_special(unsigned long entry,
+		unsigned long exit, unsigned long guest_val_vmcs,
+		unsigned long host_val_vmcs, u64 guest_val, u64 host_val)
+{
+	vmcs_write64(guest_val_vmcs, guest_val);
+	vmcs_write64(host_val_vmcs, host_val);
+	vmcs_set_bits(VM_ENTRY_CONTROLS, entry);
+	vmcs_set_bits(VM_EXIT_CONTROLS, exit);
+}
+
 static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
 				  u64 guest_val, u64 host_val)
 {
 	unsigned i;
 	struct msr_autoload *m = &vmx->msr_autoload;
 
-	if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
-		vmcs_write64(GUEST_IA32_EFER, guest_val);
-		vmcs_write64(HOST_IA32_EFER, host_val);
-		vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
-		vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
-		return;
+	switch (msr) {
+	case MSR_EFER:
+		if (cpu_has_load_ia32_efer) {
+			add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+					VM_EXIT_LOAD_IA32_EFER,
+					GUEST_IA32_EFER,
+					HOST_IA32_EFER,
+					guest_val, host_val);
+			return;
+		}
+		break;
+	case MSR_CORE_PERF_GLOBAL_CTRL:
+		if (cpu_has_load_perf_global_ctrl) {
+			add_atomic_switch_msr_special(
+					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL,
+					GUEST_IA32_PERF_GLOBAL_CTRL,
+					HOST_IA32_PERF_GLOBAL_CTRL,
+					guest_val, host_val);
+			return;
+		}
+		break;
 	}
 
 	for (i = 0; i < m->nr; ++i)
 		if (m->guest[i].index == msr)
 			break;
 
-	if (i == m->nr) {
+	if (i == NR_AUTOLOAD_MSRS) {
+		printk_once(KERN_WARNING"Not enough mst switch entries. "
+				"Can't add msr %x\n", msr);
+		return;
+	} else if (i == m->nr) {
 		++m->nr;
 		vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
 		vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
@@ -2455,6 +2506,42 @@
 		&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
 				   VM_EXIT_LOAD_IA32_EFER);
 
+	cpu_has_load_perf_global_ctrl =
+		allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS,
+				VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
+		&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
+				   VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+
+	/*
+	 * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL
+	 * but due to arrata below it can't be used. Workaround is to use
+	 * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL.
+	 *
+	 * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32]
+	 *
+	 * AAK155             (model 26)
+	 * AAP115             (model 30)
+	 * AAT100             (model 37)
+	 * BC86,AAY89,BD102   (model 44)
+	 * BA97               (model 46)
+	 *
+	 */
+	if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) {
+		switch (boot_cpu_data.x86_model) {
+		case 26:
+		case 30:
+		case 37:
+		case 44:
+		case 46:
+			cpu_has_load_perf_global_ctrl = false;
+			printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
+					"does not work properly. Using workaround\n");
+			break;
+		default:
+			break;
+		}
+	}
+
 	return 0;
 }
 
@@ -5968,6 +6055,24 @@
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);
 }
 
+static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
+{
+	int i, nr_msrs;
+	struct perf_guest_switch_msr *msrs;
+
+	msrs = perf_guest_get_msrs(&nr_msrs);
+
+	if (!msrs)
+		return;
+
+	for (i = 0; i < nr_msrs; i++)
+		if (msrs[i].host == msrs[i].guest)
+			clear_atomic_switch_msr(vmx, msrs[i].msr);
+		else
+			add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest,
+					msrs[i].host);
+}
+
 #ifdef CONFIG_X86_64
 #define R "r"
 #define Q "q"
@@ -6017,6 +6122,8 @@
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
+	atomic_switch_perf_msrs(vmx);
+
 	vmx->__launched = vmx->loaded_vmcs->launched;
 	asm(
 		/* Store host registers */
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f63da5e..cf4603b 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -56,6 +56,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
+#include <linux/export.h>
 #include <asm/apic.h>
 #include <asm/lguest.h>
 #include <asm/paravirt.h>
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 494f2e7e..794b092 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -26,6 +26,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index c89266b..2c2aeab 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -2,6 +2,7 @@
  * legacy.c - traditional, old school PCI bus probing
  */
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <asm/pci_x86.h>
 
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 28071bb..4c61b52 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -109,7 +109,7 @@
 }
 
 #else
-static inline void sdv_serial_fixup(void);
+static inline void sdv_serial_fixup(void) {};
 #endif
 
 static void __init sdv_arch_setup(void)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 3ae4128..37718f0 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -29,6 +29,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/efi.h>
+#include <linux/export.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
 #include <linux/spinlock.h>
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index 5cab48e..e36bf71 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -25,6 +25,7 @@
 #include <linux/efi.h>
 
 #include <asm/io.h>
+#include <asm/desc.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index e637952..b1489a0 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -26,6 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
 
 #include <asm/setup.h>
 #include <asm/mpspec_def.h>
@@ -185,11 +187,34 @@
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
+		u32 lo, hi, ratio, fsb;
 
-	local_irq_save(flags);
-	fast_calibrate = apbt_quick_calibrate();
-	local_irq_restore(flags);
-
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+		ratio = (hi >> 8) & 0x1f;
+		pr_debug("ratio is %d\n", ratio);
+		if (!ratio) {
+			pr_err("read a zero ratio, should be incorrect!\n");
+			pr_err("force tsc ratio to 16 ...\n");
+			ratio = 16;
+		}
+		rdmsr(MSR_FSB_FREQ, lo, hi);
+		if ((lo & 0x7) == 0x7)
+			fsb = PENWELL_FSB_FREQ_83SKU;
+		else
+			fsb = PENWELL_FSB_FREQ_100SKU;
+		fast_calibrate = ratio * fsb;
+		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+		lapic_timer_frequency = fsb * 1000 / HZ;
+		/* mark tsc clocksource as reliable */
+		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+	} else {
+		local_irq_save(flags);
+		fast_calibrate = apbt_quick_calibrate();
+		local_irq_restore(flags);
+	}
+	
 	if (fast_calibrate)
 		return fast_calibrate;
 
@@ -252,6 +277,17 @@
 }
 
 /*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+	return 0;
+}
+
+/*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
  */
@@ -272,6 +308,8 @@
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_platform.i8042_detect = mrst_i8042_detect;
 	x86_init.timers.wallclock_init = mrst_rtc_init;
+	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
 	x86_init.pci.init = pci_mrst_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
@@ -483,7 +521,130 @@
 	return NULL;
 }
 
+static struct resource msic_resources[] = {
+	{
+		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
+		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+	.name		= "intel_msic",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &msic_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(msic_resources),
+	.resource	= msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+				  unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&msic_device);
+		return 0;
+	}
+
+	return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+	static struct notifier_block msic_scu_notifier = {
+		.notifier_call	= msic_scu_status_change,
+	};
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before MSIC device
+	 * can be registered.
+	 */
+	if (mrst_has_msic())
+		intel_scu_notifier_add(&msic_scu_notifier);
+
+	return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+	struct sfi_device_table_entry *entry = info;
+
+	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+	msic_pdata.irq[block] = entry->irq;
+
+	return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+	static struct intel_msic_gpio_pdata pdata;
+	int gpio = get_gpio_by_name("msic_gpio_base");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio_base = gpio;
+	msic_pdata.gpio = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("failed to create audio platform device\n");
+		return NULL;
+	}
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+	static struct intel_msic_ocd_pdata pdata;
+	int gpio = get_gpio_by_name("ocd_gpio");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio = gpio;
+	msic_pdata.ocd = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
 static const struct devs_id __initconst device_ids[] = {
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
@@ -491,7 +652,14 @@
 	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
 	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
 	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+
+	/* MSIC subdevices */
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+
 	{},
 };
 
@@ -558,6 +726,9 @@
 	i2c_devs[i2c_next_dev++] = new_dev;
 }
 
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
 /* Called by IPC driver */
 void intel_scu_devices_create(void)
 {
@@ -582,6 +753,7 @@
 		} else
 			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
 	}
+	intel_scu_notifier_post(SCU_AVAILABLE, 0L);
 }
 EXPORT_SYMBOL_GPL(intel_scu_devices_create);
 
@@ -590,6 +762,8 @@
 {
 	int i;
 
+	intel_scu_notifier_post(SCU_DOWN, 0L);
+
 	for (i = 0; i < ipc_next_dev; i++)
 		platform_device_del(ipc_devs[i]);
 }
@@ -606,19 +780,37 @@
 	platform_device_add_resources(pdev, &res, 1);
 }
 
-static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
 {
 	const struct devs_id *dev = device_ids;
+	struct platform_device *pdev;
 	void *pdata = NULL;
 
 	while (dev->name[0]) {
 		if (dev->type == SFI_DEV_TYPE_IPC &&
-			!strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(pdev);
+			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(entry);
 			break;
 		}
 		dev++;
 	}
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (mrst_has_msic())
+		return;
+
+	/* ID as IRQ is a hack that will go away */
+	pdev = platform_device_alloc(entry->name, entry->irq);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			entry->name);
+		return;
+	}
+	install_irq_resource(pdev, entry->irq);
+
 	pdev->dev.platform_data = pdata;
 	intel_scu_device_register(pdev);
 }
@@ -671,7 +863,6 @@
 	struct sfi_device_table_entry *pentry;
 	struct spi_board_info spi_info;
 	struct i2c_board_info i2c_info;
-	struct platform_device *pdev;
 	int num, i, bus;
 	int ioapic;
 	struct io_apic_irq_attr irq_attr;
@@ -699,17 +890,9 @@
 
 		switch (pentry->type) {
 		case SFI_DEV_TYPE_IPC:
-			/* ID as IRQ is a hack that will go away */
-			pdev = platform_device_alloc(pentry->name, irq);
-			if (pdev == NULL) {
-				pr_err("out of memory for SFI platform device '%s'.\n",
-							pentry->name);
-				continue;
-			}
-			install_irq_resource(pdev, irq);
 			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
-				"irq = 0x%2x\n", i, pentry->name, irq);
-			sfi_handle_ipc_dev(pdev);
+				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
+			sfi_handle_ipc_dev(pentry);
 			break;
 		case SFI_DEV_TYPE_SPI:
 			memset(&spi_info, 0, sizeof(spi_info));
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
index 9281da7..c0ac06d 100644
--- a/arch/x86/platform/mrst/pmu.c
+++ b/arch/x86/platform/mrst/pmu.c
@@ -70,7 +70,7 @@
 /* 24 */ { 0x4110, 0 },			/* Lincroft */
 };
 
-/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */
+/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
 static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
 static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
 					0x0804, 0x0805, 0x080f, 0};
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 6d5dbcd..225bd0f 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/platform_device.h>
@@ -75,8 +76,8 @@
 
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	/* vRTC YEAR reg contains the offset to 1960 */
-	year += 1960;
+	/* vRTC YEAR reg contains the offset to 1972 */
+	year += 1972;
 
 	printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
 		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c
index 6f3855a..0ce8616c 100644
--- a/arch/x86/platform/olpc/olpc-xo1-pm.c
+++ b/arch/x86/platform/olpc/olpc-xo1-pm.c
@@ -14,6 +14,7 @@
 
 #include <linux/cs5535.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 #include <linux/pm.h>
 #include <linux/mfd/core.h>
 #include <linux/suspend.h>
diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c
index 8bc57ba..7666121 100644
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/efi.h>
+#include <linux/export.h>
 #include <asm/efi.h>
 #include <linux/io.h>
 #include <asm/uv/bios.h>
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 87bb35e..f10c0af 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/suspend.h>
+#include <linux/export.h>
 #include <linux/smp.h>
 
 #include <asm/pgtable.h>
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 21bebe6..1d97bd8 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -57,9 +57,6 @@
 config ARCH_REUSE_HOST_VSYSCALL_AREA
 	def_bool !64BIT
 
-config SMP_BROKEN
-	def_bool 64BIT
-
 config GENERIC_HWEIGHT
 	def_bool y
 
diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h
index 118c143..2c32df6 100644
--- a/arch/x86/um/asm/processor.h
+++ b/arch/x86/um/asm/processor.h
@@ -11,7 +11,7 @@
 #endif
 
 #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP)
 #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
 
 #define ARCH_IS_STACKGROW(address) \
diff --git a/arch/x86/video/fbdev.c b/arch/x86/video/fbdev.c
index 6952768..c5ffb6a 100644
--- a/arch/x86/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
@@ -8,6 +8,7 @@
  */
 #include <linux/fb.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 int fb_is_primary_device(struct fb_info *info)
 {
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index da8afd5..1f92865 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1356,7 +1356,7 @@
 	int cpu = (long)hcpu;
 	switch (action) {
 	case CPU_UP_PREPARE:
-		per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+		xen_vcpu_setup(cpu);
 		if (xen_have_vector_callback)
 			xen_init_lock_cpu(cpu);
 		break;
@@ -1386,7 +1386,6 @@
 	xen_hvm_smp_init();
 	register_cpu_notifier(&xen_hvm_cpu_notifier);
 	xen_unplug_emulated_devices();
-	have_vcpu_info_placement = 0;
 	x86_init.irqs.intr_init = xen_init_IRQ;
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c
index 49ba9b5..5a40d24 100644
--- a/arch/x86/xen/grant-table.c
+++ b/arch/x86/xen/grant-table.c
@@ -71,7 +71,7 @@
 
 	if (shared == NULL) {
 		struct vm_struct *area =
-			xen_alloc_vm_area(PAGE_SIZE * max_nr_gframes);
+			alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL);
 		BUG_ON(area == NULL);
 		shared = area->addr;
 		*__shared = shared;
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 38d0af4..1093f80 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -410,6 +410,6 @@
 #endif
 	disable_cpuidle();
 	boot_option_idle_override = IDLE_HALT;
-
+	WARN_ON(set_pm_idle_to_default());
 	fiddle_vdso();
 }
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 163b467..0296a95 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -201,8 +201,22 @@
 
 static int xen_set_wallclock(unsigned long now)
 {
+	struct xen_platform_op op;
+	int rc;
+
 	/* do nothing for domU */
-	return -1;
+	if (!xen_initial_domain())
+		return -1;
+
+	op.cmd = XENPF_settime;
+	op.u.settime.secs = now;
+	op.u.settime.nsecs = 0;
+	op.u.settime.system_time = xen_clocksource_read();
+
+	rc = HYPERVISOR_dom0_op(&op);
+	WARN(rc != 0, "XENPF_settime failed: now=%ld\n", now);
+
+	return rc;
 }
 
 static struct clocksource xen_clocksource __read_mostly = {
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index b596e54..8f630ce 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -768,25 +768,14 @@
 	return disk_total;
 }
 
-static int blkio_check_dev_num(dev_t dev)
-{
-	int part = 0;
-	struct gendisk *disk;
-
-	disk = get_gendisk(dev, &part);
-	if (!disk || part)
-		return -ENODEV;
-
-	return 0;
-}
-
 static int blkio_policy_parse_and_set(char *buf,
 	struct blkio_policy_node *newpn, enum blkio_policy_id plid, int fileid)
 {
+	struct gendisk *disk = NULL;
 	char *s[4], *p, *major_s = NULL, *minor_s = NULL;
-	int ret;
 	unsigned long major, minor;
-	int i = 0;
+	int i = 0, ret = -EINVAL;
+	int part;
 	dev_t dev;
 	u64 temp;
 
@@ -804,37 +793,36 @@
 	}
 
 	if (i != 2)
-		return -EINVAL;
+		goto out;
 
 	p = strsep(&s[0], ":");
 	if (p != NULL)
 		major_s = p;
 	else
-		return -EINVAL;
+		goto out;
 
 	minor_s = s[0];
 	if (!minor_s)
-		return -EINVAL;
+		goto out;
 
-	ret = strict_strtoul(major_s, 10, &major);
-	if (ret)
-		return -EINVAL;
+	if (strict_strtoul(major_s, 10, &major))
+		goto out;
 
-	ret = strict_strtoul(minor_s, 10, &minor);
-	if (ret)
-		return -EINVAL;
+	if (strict_strtoul(minor_s, 10, &minor))
+		goto out;
 
 	dev = MKDEV(major, minor);
 
-	ret = strict_strtoull(s[1], 10, &temp);
-	if (ret)
-		return -EINVAL;
+	if (strict_strtoull(s[1], 10, &temp))
+		goto out;
 
 	/* For rule removal, do not check for device presence. */
 	if (temp) {
-		ret = blkio_check_dev_num(dev);
-		if (ret)
-			return ret;
+		disk = get_gendisk(dev, &part);
+		if (!disk || part) {
+			ret = -ENODEV;
+			goto out;
+		}
 	}
 
 	newpn->dev = dev;
@@ -843,7 +831,7 @@
 	case BLKIO_POLICY_PROP:
 		if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
 		     temp > BLKIO_WEIGHT_MAX)
-			return -EINVAL;
+			goto out;
 
 		newpn->plid = plid;
 		newpn->fileid = fileid;
@@ -860,7 +848,7 @@
 		case BLKIO_THROTL_read_iops_device:
 		case BLKIO_THROTL_write_iops_device:
 			if (temp > THROTL_IOPS_MAX)
-				return -EINVAL;
+				goto out;
 
 			newpn->plid = plid;
 			newpn->fileid = fileid;
@@ -871,68 +859,96 @@
 	default:
 		BUG();
 	}
-
-	return 0;
+	ret = 0;
+out:
+	put_disk(disk);
+	return ret;
 }
 
 unsigned int blkcg_get_weight(struct blkio_cgroup *blkcg,
 			      dev_t dev)
 {
 	struct blkio_policy_node *pn;
+	unsigned long flags;
+	unsigned int weight;
+
+	spin_lock_irqsave(&blkcg->lock, flags);
 
 	pn = blkio_policy_search_node(blkcg, dev, BLKIO_POLICY_PROP,
 				BLKIO_PROP_weight_device);
 	if (pn)
-		return pn->val.weight;
+		weight = pn->val.weight;
 	else
-		return blkcg->weight;
+		weight = blkcg->weight;
+
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	return weight;
 }
 EXPORT_SYMBOL_GPL(blkcg_get_weight);
 
 uint64_t blkcg_get_read_bps(struct blkio_cgroup *blkcg, dev_t dev)
 {
 	struct blkio_policy_node *pn;
+	unsigned long flags;
+	uint64_t bps = -1;
 
+	spin_lock_irqsave(&blkcg->lock, flags);
 	pn = blkio_policy_search_node(blkcg, dev, BLKIO_POLICY_THROTL,
 				BLKIO_THROTL_read_bps_device);
 	if (pn)
-		return pn->val.bps;
-	else
-		return -1;
+		bps = pn->val.bps;
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	return bps;
 }
 
 uint64_t blkcg_get_write_bps(struct blkio_cgroup *blkcg, dev_t dev)
 {
 	struct blkio_policy_node *pn;
+	unsigned long flags;
+	uint64_t bps = -1;
+
+	spin_lock_irqsave(&blkcg->lock, flags);
 	pn = blkio_policy_search_node(blkcg, dev, BLKIO_POLICY_THROTL,
 				BLKIO_THROTL_write_bps_device);
 	if (pn)
-		return pn->val.bps;
-	else
-		return -1;
+		bps = pn->val.bps;
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	return bps;
 }
 
 unsigned int blkcg_get_read_iops(struct blkio_cgroup *blkcg, dev_t dev)
 {
 	struct blkio_policy_node *pn;
+	unsigned long flags;
+	unsigned int iops = -1;
 
+	spin_lock_irqsave(&blkcg->lock, flags);
 	pn = blkio_policy_search_node(blkcg, dev, BLKIO_POLICY_THROTL,
 				BLKIO_THROTL_read_iops_device);
 	if (pn)
-		return pn->val.iops;
-	else
-		return -1;
+		iops = pn->val.iops;
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	return iops;
 }
 
 unsigned int blkcg_get_write_iops(struct blkio_cgroup *blkcg, dev_t dev)
 {
 	struct blkio_policy_node *pn;
+	unsigned long flags;
+	unsigned int iops = -1;
+
+	spin_lock_irqsave(&blkcg->lock, flags);
 	pn = blkio_policy_search_node(blkcg, dev, BLKIO_POLICY_THROTL,
 				BLKIO_THROTL_write_iops_device);
 	if (pn)
-		return pn->val.iops;
-	else
-		return -1;
+		iops = pn->val.iops;
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	return iops;
 }
 
 /* Checks whether user asked for deleting a policy rule */
@@ -1085,6 +1101,7 @@
 
 	if (blkio_delete_rule_command(newpn)) {
 		blkio_policy_delete_node(pn);
+		kfree(pn);
 		spin_unlock_irq(&blkcg->lock);
 		goto update_io_group;
 	}
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index a71d290..6f3ace7 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -188,7 +188,7 @@
 	union {
 		unsigned int weight;
 		/*
-		 * Rate read/write in terms of byptes per second
+		 * Rate read/write in terms of bytes per second
 		 * Whether this rate represents read or write is determined
 		 * by file type "fileid".
 		 */
diff --git a/block/blk-core.c b/block/blk-core.c
index d34433a..ea70e6c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -28,6 +28,7 @@
 #include <linux/task_io_accounting_ops.h>
 #include <linux/fault-inject.h>
 #include <linux/list_sort.h>
+#include <linux/delay.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/block.h>
@@ -38,8 +39,6 @@
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
 
-static int __make_request(struct request_queue *q, struct bio *bio);
-
 /*
  * For the allocated request tables
  */
@@ -347,30 +346,80 @@
 }
 EXPORT_SYMBOL(blk_put_queue);
 
-/*
- * Note: If a driver supplied the queue lock, it is disconnected
- * by this function. The actual state of the lock doesn't matter
- * here as the request_queue isn't accessible after this point
- * (QUEUE_FLAG_DEAD is set) and no other requests will be queued.
+/**
+ * blk_drain_queue - drain requests from request_queue
+ * @q: queue to drain
+ * @drain_all: whether to drain all requests or only the ones w/ ELVPRIV
+ *
+ * Drain requests from @q.  If @drain_all is set, all requests are drained.
+ * If not, only ELVPRIV requests are drained.  The caller is responsible
+ * for ensuring that no new requests which need to be drained are queued.
+ */
+void blk_drain_queue(struct request_queue *q, bool drain_all)
+{
+	while (true) {
+		int nr_rqs;
+
+		spin_lock_irq(q->queue_lock);
+
+		elv_drain_elevator(q);
+		if (drain_all)
+			blk_throtl_drain(q);
+
+		__blk_run_queue(q);
+
+		if (drain_all)
+			nr_rqs = q->rq.count[0] + q->rq.count[1];
+		else
+			nr_rqs = q->rq.elvpriv;
+
+		spin_unlock_irq(q->queue_lock);
+
+		if (!nr_rqs)
+			break;
+		msleep(10);
+	}
+}
+
+/**
+ * blk_cleanup_queue - shutdown a request queue
+ * @q: request queue to shutdown
+ *
+ * Mark @q DEAD, drain all pending requests, destroy and put it.  All
+ * future requests will be failed immediately with -ENODEV.
  */
 void blk_cleanup_queue(struct request_queue *q)
 {
-	/*
-	 * We know we have process context here, so we can be a little
-	 * cautious and ensure that pending block actions on this device
-	 * are done before moving on. Going into this function, we should
-	 * not have processes doing IO to this device.
-	 */
-	blk_sync_queue(q);
+	spinlock_t *lock = q->queue_lock;
 
-	del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
+	/* mark @q DEAD, no new request or merges will be allowed afterwards */
 	mutex_lock(&q->sysfs_lock);
 	queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-	mutex_unlock(&q->sysfs_lock);
+
+	spin_lock_irq(lock);
+	queue_flag_set(QUEUE_FLAG_NOMERGES, q);
+	queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
+	queue_flag_set(QUEUE_FLAG_DEAD, q);
 
 	if (q->queue_lock != &q->__queue_lock)
 		q->queue_lock = &q->__queue_lock;
 
+	spin_unlock_irq(lock);
+	mutex_unlock(&q->sysfs_lock);
+
+	/*
+	 * Drain all requests queued before DEAD marking.  The caller might
+	 * be trying to tear down @q before its elevator is initialized, in
+	 * which case we don't want to call into draining.
+	 */
+	if (q->elevator)
+		blk_drain_queue(q, true);
+
+	/* @q won't process any more request, flush async actions */
+	del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
+	blk_sync_queue(q);
+
+	/* @q is and will stay empty, shutdown and put */
 	blk_put_queue(q);
 }
 EXPORT_SYMBOL(blk_cleanup_queue);
@@ -541,7 +590,7 @@
 	/*
 	 * This also sets hw/phys segments, boundary and size
 	 */
-	blk_queue_make_request(q, __make_request);
+	blk_queue_make_request(q, blk_queue_bio);
 
 	q->sg_reserved_size = INT_MAX;
 
@@ -576,7 +625,7 @@
 }
 
 static struct request *
-blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, unsigned int flags, gfp_t gfp_mask)
 {
 	struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
 
@@ -587,12 +636,10 @@
 
 	rq->cmd_flags = flags | REQ_ALLOCED;
 
-	if (priv) {
-		if (unlikely(elv_set_request(q, rq, gfp_mask))) {
-			mempool_free(rq, q->rq.rq_pool);
-			return NULL;
-		}
-		rq->cmd_flags |= REQ_ELVPRIV;
+	if ((flags & REQ_ELVPRIV) &&
+	    unlikely(elv_set_request(q, rq, gfp_mask))) {
+		mempool_free(rq, q->rq.rq_pool);
+		return NULL;
 	}
 
 	return rq;
@@ -651,12 +698,13 @@
  * A request has just been released.  Account for it, update the full and
  * congestion status, wake up any waiters.   Called under q->queue_lock.
  */
-static void freed_request(struct request_queue *q, int sync, int priv)
+static void freed_request(struct request_queue *q, unsigned int flags)
 {
 	struct request_list *rl = &q->rq;
+	int sync = rw_is_sync(flags);
 
 	rl->count[sync]--;
-	if (priv)
+	if (flags & REQ_ELVPRIV)
 		rl->elvpriv--;
 
 	__freed_request(q, sync);
@@ -684,10 +732,19 @@
 	return true;
 }
 
-/*
- * Get a free request, queue_lock must be held.
- * Returns NULL on failure, with queue_lock held.
- * Returns !NULL on success, with queue_lock *not held*.
+/**
+ * get_request - get a free request
+ * @q: request_queue to allocate request from
+ * @rw_flags: RW and SYNC flags
+ * @bio: bio to allocate request for (can be %NULL)
+ * @gfp_mask: allocation mask
+ *
+ * Get a free request from @q.  This function may fail under memory
+ * pressure or if @q is dead.
+ *
+ * Must be callled with @q->queue_lock held and,
+ * Returns %NULL on failure, with @q->queue_lock held.
+ * Returns !%NULL on success, with @q->queue_lock *not held*.
  */
 static struct request *get_request(struct request_queue *q, int rw_flags,
 				   struct bio *bio, gfp_t gfp_mask)
@@ -696,7 +753,10 @@
 	struct request_list *rl = &q->rq;
 	struct io_context *ioc = NULL;
 	const bool is_sync = rw_is_sync(rw_flags) != 0;
-	int may_queue, priv = 0;
+	int may_queue;
+
+	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
+		return NULL;
 
 	may_queue = elv_may_queue(q, rw_flags);
 	if (may_queue == ELV_MQUEUE_NO)
@@ -740,17 +800,17 @@
 	rl->count[is_sync]++;
 	rl->starved[is_sync] = 0;
 
-	if (blk_rq_should_init_elevator(bio)) {
-		priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
-		if (priv)
-			rl->elvpriv++;
+	if (blk_rq_should_init_elevator(bio) &&
+	    !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags)) {
+		rw_flags |= REQ_ELVPRIV;
+		rl->elvpriv++;
 	}
 
 	if (blk_queue_io_stat(q))
 		rw_flags |= REQ_IO_STAT;
 	spin_unlock_irq(q->queue_lock);
 
-	rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
+	rq = blk_alloc_request(q, rw_flags, gfp_mask);
 	if (unlikely(!rq)) {
 		/*
 		 * Allocation failed presumably due to memory. Undo anything
@@ -760,7 +820,7 @@
 		 * wait queue, but this is pretty rare.
 		 */
 		spin_lock_irq(q->queue_lock);
-		freed_request(q, is_sync, priv);
+		freed_request(q, rw_flags);
 
 		/*
 		 * in the very unlikely event that allocation failed and no
@@ -790,11 +850,18 @@
 	return rq;
 }
 
-/*
- * No available requests for this queue, wait for some requests to become
- * available.
+/**
+ * get_request_wait - get a free request with retry
+ * @q: request_queue to allocate request from
+ * @rw_flags: RW and SYNC flags
+ * @bio: bio to allocate request for (can be %NULL)
  *
- * Called with q->queue_lock held, and returns with it unlocked.
+ * Get a free request from @q.  This function keeps retrying under memory
+ * pressure and fails iff @q is dead.
+ *
+ * Must be callled with @q->queue_lock held and,
+ * Returns %NULL on failure, with @q->queue_lock held.
+ * Returns !%NULL on success, with @q->queue_lock *not held*.
  */
 static struct request *get_request_wait(struct request_queue *q, int rw_flags,
 					struct bio *bio)
@@ -808,6 +875,9 @@
 		struct io_context *ioc;
 		struct request_list *rl = &q->rq;
 
+		if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
+			return NULL;
+
 		prepare_to_wait_exclusive(&rl->wait[is_sync], &wait,
 				TASK_UNINTERRUPTIBLE);
 
@@ -838,19 +908,15 @@
 {
 	struct request *rq;
 
-	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
-		return NULL;
-
 	BUG_ON(rw != READ && rw != WRITE);
 
 	spin_lock_irq(q->queue_lock);
-	if (gfp_mask & __GFP_WAIT) {
+	if (gfp_mask & __GFP_WAIT)
 		rq = get_request_wait(q, rw, NULL);
-	} else {
+	else
 		rq = get_request(q, rw, NULL, gfp_mask);
-		if (!rq)
-			spin_unlock_irq(q->queue_lock);
-	}
+	if (!rq)
+		spin_unlock_irq(q->queue_lock);
 	/* q->queue_lock is unlocked at this point */
 
 	return rq;
@@ -1052,14 +1118,13 @@
 	 * it didn't come out of our reserved rq pools
 	 */
 	if (req->cmd_flags & REQ_ALLOCED) {
-		int is_sync = rq_is_sync(req) != 0;
-		int priv = req->cmd_flags & REQ_ELVPRIV;
+		unsigned int flags = req->cmd_flags;
 
 		BUG_ON(!list_empty(&req->queuelist));
 		BUG_ON(!hlist_unhashed(&req->hash));
 
 		blk_free_request(q, req);
-		freed_request(q, is_sync, priv);
+		freed_request(q, flags);
 	}
 }
 EXPORT_SYMBOL_GPL(__blk_put_request);
@@ -1161,18 +1226,32 @@
 	return true;
 }
 
-/*
- * Attempts to merge with the plugged list in the current process. Returns
- * true if merge was successful, otherwise false.
+/**
+ * attempt_plug_merge - try to merge with %current's plugged list
+ * @q: request_queue new bio is being queued at
+ * @bio: new bio being queued
+ * @request_count: out parameter for number of traversed plugged requests
+ *
+ * Determine whether @bio being queued on @q can be merged with a request
+ * on %current's plugged list.  Returns %true if merge was successful,
+ * otherwise %false.
+ *
+ * This function is called without @q->queue_lock; however, elevator is
+ * accessed iff there already are requests on the plugged list which in
+ * turn guarantees validity of the elevator.
+ *
+ * Note that, on successful merge, elevator operation
+ * elevator_bio_merged_fn() will be called without queue lock.  Elevator
+ * must be ready for this.
  */
-static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
-			       struct bio *bio, unsigned int *request_count)
+static bool attempt_plug_merge(struct request_queue *q, struct bio *bio,
+			       unsigned int *request_count)
 {
 	struct blk_plug *plug;
 	struct request *rq;
 	bool ret = false;
 
-	plug = tsk->plug;
+	plug = current->plug;
 	if (!plug)
 		goto out;
 	*request_count = 0;
@@ -1202,7 +1281,6 @@
 
 void init_request_from_bio(struct request *req, struct bio *bio)
 {
-	req->cpu = bio->bi_comp_cpu;
 	req->cmd_type = REQ_TYPE_FS;
 
 	req->cmd_flags |= bio->bi_rw & REQ_COMMON_MASK;
@@ -1215,7 +1293,7 @@
 	blk_rq_bio_prep(req->q, req, bio);
 }
 
-static int __make_request(struct request_queue *q, struct bio *bio)
+void blk_queue_bio(struct request_queue *q, struct bio *bio)
 {
 	const bool sync = !!(bio->bi_rw & REQ_SYNC);
 	struct blk_plug *plug;
@@ -1240,8 +1318,8 @@
 	 * Check if we can merge with the plugged list before grabbing
 	 * any locks.
 	 */
-	if (attempt_plug_merge(current, q, bio, &request_count))
-		goto out;
+	if (attempt_plug_merge(q, bio, &request_count))
+		return;
 
 	spin_lock_irq(q->queue_lock);
 
@@ -1275,6 +1353,10 @@
 	 * Returns with the queue unlocked.
 	 */
 	req = get_request_wait(q, rw_flags, bio);
+	if (unlikely(!req)) {
+		bio_endio(bio, -ENODEV);	/* @q is dead */
+		goto out_unlock;
+	}
 
 	/*
 	 * After dropping the lock and possibly sleeping here, our request
@@ -1284,8 +1366,7 @@
 	 */
 	init_request_from_bio(req, bio);
 
-	if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) ||
-	    bio_flagged(bio, BIO_CPU_AFFINE))
+	if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags))
 		req->cpu = raw_smp_processor_id();
 
 	plug = current->plug;
@@ -1298,15 +1379,19 @@
 		 */
 		if (list_empty(&plug->list))
 			trace_block_plug(q);
-		else if (!plug->should_sort) {
-			struct request *__rq;
+		else {
+			if (!plug->should_sort) {
+				struct request *__rq;
 
-			__rq = list_entry_rq(plug->list.prev);
-			if (__rq->q != q)
-				plug->should_sort = 1;
+				__rq = list_entry_rq(plug->list.prev);
+				if (__rq->q != q)
+					plug->should_sort = 1;
+			}
+			if (request_count >= BLK_MAX_REQUEST_COUNT) {
+				blk_flush_plug_list(plug, false);
+				trace_block_plug(q);
+			}
 		}
-		if (request_count >= BLK_MAX_REQUEST_COUNT)
-			blk_flush_plug_list(plug, false);
 		list_add_tail(&req->queuelist, &plug->list);
 		drive_stat_acct(req, 1);
 	} else {
@@ -1316,9 +1401,8 @@
 out_unlock:
 		spin_unlock_irq(q->queue_lock);
 	}
-out:
-	return 0;
 }
+EXPORT_SYMBOL_GPL(blk_queue_bio);	/* for device mapper only */
 
 /*
  * If bio->bi_dev is a partition, remap the location
@@ -1417,6 +1501,89 @@
 	return 0;
 }
 
+static noinline_for_stack bool
+generic_make_request_checks(struct bio *bio)
+{
+	struct request_queue *q;
+	int nr_sectors = bio_sectors(bio);
+	int err = -EIO;
+	char b[BDEVNAME_SIZE];
+	struct hd_struct *part;
+
+	might_sleep();
+
+	if (bio_check_eod(bio, nr_sectors))
+		goto end_io;
+
+	q = bdev_get_queue(bio->bi_bdev);
+	if (unlikely(!q)) {
+		printk(KERN_ERR
+		       "generic_make_request: Trying to access "
+			"nonexistent block-device %s (%Lu)\n",
+			bdevname(bio->bi_bdev, b),
+			(long long) bio->bi_sector);
+		goto end_io;
+	}
+
+	if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
+		     nr_sectors > queue_max_hw_sectors(q))) {
+		printk(KERN_ERR "bio too big device %s (%u > %u)\n",
+		       bdevname(bio->bi_bdev, b),
+		       bio_sectors(bio),
+		       queue_max_hw_sectors(q));
+		goto end_io;
+	}
+
+	part = bio->bi_bdev->bd_part;
+	if (should_fail_request(part, bio->bi_size) ||
+	    should_fail_request(&part_to_disk(part)->part0,
+				bio->bi_size))
+		goto end_io;
+
+	/*
+	 * If this device has partitions, remap block n
+	 * of partition p to block n+start(p) of the disk.
+	 */
+	blk_partition_remap(bio);
+
+	if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
+		goto end_io;
+
+	if (bio_check_eod(bio, nr_sectors))
+		goto end_io;
+
+	/*
+	 * Filter flush bio's early so that make_request based
+	 * drivers without flush support don't have to worry
+	 * about them.
+	 */
+	if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) {
+		bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA);
+		if (!nr_sectors) {
+			err = 0;
+			goto end_io;
+		}
+	}
+
+	if ((bio->bi_rw & REQ_DISCARD) &&
+	    (!blk_queue_discard(q) ||
+	     ((bio->bi_rw & REQ_SECURE) &&
+	      !blk_queue_secdiscard(q)))) {
+		err = -EOPNOTSUPP;
+		goto end_io;
+	}
+
+	if (blk_throtl_bio(q, bio))
+		return false;	/* throttled, will be resubmitted later */
+
+	trace_block_bio_queue(q, bio);
+	return true;
+
+end_io:
+	bio_endio(bio, err);
+	return false;
+}
+
 /**
  * generic_make_request - hand a buffer to its device driver for I/O
  * @bio:  The bio describing the location in memory and on the device.
@@ -1437,145 +1604,32 @@
  * completion notification should be signaled.
  *
  * generic_make_request and the drivers it calls may use bi_next if this
- * bio happens to be merged with someone else, and may change bi_dev and
- * bi_sector for remaps as it sees fit.  So the values of these fields
- * should NOT be depended on after the call to generic_make_request.
- */
-static inline void __generic_make_request(struct bio *bio)
-{
-	struct request_queue *q;
-	sector_t old_sector;
-	int ret, nr_sectors = bio_sectors(bio);
-	dev_t old_dev;
-	int err = -EIO;
-
-	might_sleep();
-
-	if (bio_check_eod(bio, nr_sectors))
-		goto end_io;
-
-	/*
-	 * Resolve the mapping until finished. (drivers are
-	 * still free to implement/resolve their own stacking
-	 * by explicitly returning 0)
-	 *
-	 * NOTE: we don't repeat the blk_size check for each new device.
-	 * Stacking drivers are expected to know what they are doing.
-	 */
-	old_sector = -1;
-	old_dev = 0;
-	do {
-		char b[BDEVNAME_SIZE];
-		struct hd_struct *part;
-
-		q = bdev_get_queue(bio->bi_bdev);
-		if (unlikely(!q)) {
-			printk(KERN_ERR
-			       "generic_make_request: Trying to access "
-				"nonexistent block-device %s (%Lu)\n",
-				bdevname(bio->bi_bdev, b),
-				(long long) bio->bi_sector);
-			goto end_io;
-		}
-
-		if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
-			     nr_sectors > queue_max_hw_sectors(q))) {
-			printk(KERN_ERR "bio too big device %s (%u > %u)\n",
-			       bdevname(bio->bi_bdev, b),
-			       bio_sectors(bio),
-			       queue_max_hw_sectors(q));
-			goto end_io;
-		}
-
-		if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
-			goto end_io;
-
-		part = bio->bi_bdev->bd_part;
-		if (should_fail_request(part, bio->bi_size) ||
-		    should_fail_request(&part_to_disk(part)->part0,
-					bio->bi_size))
-			goto end_io;
-
-		/*
-		 * If this device has partitions, remap block n
-		 * of partition p to block n+start(p) of the disk.
-		 */
-		blk_partition_remap(bio);
-
-		if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
-			goto end_io;
-
-		if (old_sector != -1)
-			trace_block_bio_remap(q, bio, old_dev, old_sector);
-
-		old_sector = bio->bi_sector;
-		old_dev = bio->bi_bdev->bd_dev;
-
-		if (bio_check_eod(bio, nr_sectors))
-			goto end_io;
-
-		/*
-		 * Filter flush bio's early so that make_request based
-		 * drivers without flush support don't have to worry
-		 * about them.
-		 */
-		if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) {
-			bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA);
-			if (!nr_sectors) {
-				err = 0;
-				goto end_io;
-			}
-		}
-
-		if ((bio->bi_rw & REQ_DISCARD) &&
-		    (!blk_queue_discard(q) ||
-		     ((bio->bi_rw & REQ_SECURE) &&
-		      !blk_queue_secdiscard(q)))) {
-			err = -EOPNOTSUPP;
-			goto end_io;
-		}
-
-		if (blk_throtl_bio(q, &bio))
-			goto end_io;
-
-		/*
-		 * If bio = NULL, bio has been throttled and will be submitted
-		 * later.
-		 */
-		if (!bio)
-			break;
-
-		trace_block_bio_queue(q, bio);
-
-		ret = q->make_request_fn(q, bio);
-	} while (ret);
-
-	return;
-
-end_io:
-	bio_endio(bio, err);
-}
-
-/*
- * We only want one ->make_request_fn to be active at a time,
- * else stack usage with stacked devices could be a problem.
- * So use current->bio_list to keep a list of requests
- * submited by a make_request_fn function.
- * current->bio_list is also used as a flag to say if
- * generic_make_request is currently active in this task or not.
- * If it is NULL, then no make_request is active.  If it is non-NULL,
- * then a make_request is active, and new requests should be added
- * at the tail
+ * bio happens to be merged with someone else, and may resubmit the bio to
+ * a lower device by calling into generic_make_request recursively, which
+ * means the bio should NOT be touched after the call to ->make_request_fn.
  */
 void generic_make_request(struct bio *bio)
 {
 	struct bio_list bio_list_on_stack;
 
+	if (!generic_make_request_checks(bio))
+		return;
+
+	/*
+	 * We only want one ->make_request_fn to be active at a time, else
+	 * stack usage with stacked devices could be a problem.  So use
+	 * current->bio_list to keep a list of requests submited by a
+	 * make_request_fn function.  current->bio_list is also used as a
+	 * flag to say if generic_make_request is currently active in this
+	 * task or not.  If it is NULL, then no make_request is active.  If
+	 * it is non-NULL, then a make_request is active, and new requests
+	 * should be added at the tail
+	 */
 	if (current->bio_list) {
-		/* make_request is active */
 		bio_list_add(current->bio_list, bio);
 		return;
 	}
+
 	/* following loop may be a bit non-obvious, and so deserves some
 	 * explanation.
 	 * Before entering the loop, bio->bi_next is NULL (as all callers
@@ -1583,22 +1637,21 @@
 	 * We pretend that we have just taken it off a longer list, so
 	 * we assign bio_list to a pointer to the bio_list_on_stack,
 	 * thus initialising the bio_list of new bios to be
-	 * added.  __generic_make_request may indeed add some more bios
+	 * added.  ->make_request() may indeed add some more bios
 	 * through a recursive call to generic_make_request.  If it
 	 * did, we find a non-NULL value in bio_list and re-enter the loop
 	 * from the top.  In this case we really did just take the bio
 	 * of the top of the list (no pretending) and so remove it from
-	 * bio_list, and call into __generic_make_request again.
-	 *
-	 * The loop was structured like this to make only one call to
-	 * __generic_make_request (which is important as it is large and
-	 * inlined) and to keep the structure simple.
+	 * bio_list, and call into ->make_request() again.
 	 */
 	BUG_ON(bio->bi_next);
 	bio_list_init(&bio_list_on_stack);
 	current->bio_list = &bio_list_on_stack;
 	do {
-		__generic_make_request(bio);
+		struct request_queue *q = bdev_get_queue(bio->bi_bdev);
+
+		q->make_request_fn(q, bio);
+
 		bio = bio_list_pop(current->bio_list);
 	} while (bio);
 	current->bio_list = NULL; /* deactivate */
@@ -1725,6 +1778,8 @@
 		where = ELEVATOR_INSERT_FLUSH;
 
 	add_acct_request(q, rq, where);
+	if (where == ELEVATOR_INSERT_FLUSH)
+		__blk_run_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	return 0;
@@ -2628,6 +2683,20 @@
 
 #define PLUG_MAGIC	0x91827364
 
+/**
+ * blk_start_plug - initialize blk_plug and track it inside the task_struct
+ * @plug:	The &struct blk_plug that needs to be initialized
+ *
+ * Description:
+ *   Tracking blk_plug inside the task_struct will help with auto-flushing the
+ *   pending I/O should the task end up blocking between blk_start_plug() and
+ *   blk_finish_plug(). This is important from a performance perspective, but
+ *   also ensures that we don't deadlock. For instance, if the task is blocking
+ *   for a memory allocation, memory reclaim could end up wanting to free a
+ *   page belonging to that request that is currently residing in our private
+ *   plug. By flushing the pending I/O when the process goes to sleep, we avoid
+ *   this kind of deadlock.
+ */
 void blk_start_plug(struct blk_plug *plug)
 {
 	struct task_struct *tsk = current;
diff --git a/block/blk-flush.c b/block/blk-flush.c
index 491eb30..720ad60 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -320,7 +320,7 @@
 		return;
 	}
 
-	BUG_ON(!rq->bio || rq->bio != rq->biotail);
+	BUG_ON(rq->bio != rq->biotail); /*assumes zero or single bio rq */
 
 	/*
 	 * If there's data but flush is not necessary, the request can be
@@ -330,7 +330,6 @@
 	if ((policy & REQ_FSEQ_DATA) &&
 	    !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
 		list_add_tail(&rq->queuelist, &q->queue_head);
-		blk_run_queue_async(q);
 		return;
 	}
 
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 129b9e2..da2a818 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -24,6 +24,7 @@
 #include <linux/mempool.h>
 #include <linux/bio.h>
 #include <linux/scatterlist.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include "blk.h"
diff --git a/block/blk-map.c b/block/blk-map.c
index e663ac2..164cd00 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -204,10 +204,11 @@
 		if (!iov[i].iov_len)
 			return -EINVAL;
 
-		if (uaddr & queue_dma_alignment(q)) {
+		/*
+		 * Keep going so we check length of all segments
+		 */
+		if (uaddr & queue_dma_alignment(q))
 			unaligned = 1;
-			break;
-		}
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 60fda88..e7f9f65 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -457,11 +457,11 @@
 }
 
 /**
- * blk_cleanup_queue: - release a &struct request_queue when it is no longer needed
- * @kobj:    the kobj belonging of the request queue to be released
+ * blk_release_queue: - release a &struct request_queue when it is no longer needed
+ * @kobj:    the kobj belonging to the request queue to be released
  *
  * Description:
- *     blk_cleanup_queue is the pair to blk_init_queue() or
+ *     blk_release_queue is the pair to blk_init_queue() or
  *     blk_queue_make_request().  It should be called when a request queue is
  *     being released; typically when a block device is being de-registered.
  *     Currently, its primary task it to free all the &struct request
@@ -490,6 +490,7 @@
 	if (q->queue_tags)
 		__blk_queue_free_tags(q);
 
+	blk_throtl_release(q);
 	blk_trace_shutdown(q);
 
 	bdi_destroy(&q->backing_dev_info);
diff --git a/block/blk-tag.c b/block/blk-tag.c
index ece65fc..e74d6d1 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -286,12 +286,14 @@
 
 	BUG_ON(tag == -1);
 
-	if (unlikely(tag >= bqt->real_max_depth))
+	if (unlikely(tag >= bqt->max_depth)) {
 		/*
 		 * This can happen after tag depth has been reduced.
-		 * FIXME: how about a warning or info message here?
+		 * But tag shouldn't be larger than real_max_depth.
 		 */
+		WARN_ON(tag >= bqt->real_max_depth);
 		return;
+	}
 
 	list_del_init(&rq->queuelist);
 	rq->cmd_flags &= ~REQ_QUEUED;
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a19f58c..4553245 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -10,6 +10,7 @@
 #include <linux/bio.h>
 #include <linux/blktrace_api.h>
 #include "blk-cgroup.h"
+#include "blk.h"
 
 /* Max dispatch from a group in 1 round */
 static int throtl_grp_quantum = 8;
@@ -302,16 +303,16 @@
 	return tg;
 }
 
-/*
- * This function returns with queue lock unlocked in case of error, like
- * request queue is no more
- */
 static struct throtl_grp * throtl_get_tg(struct throtl_data *td)
 {
 	struct throtl_grp *tg = NULL, *__tg = NULL;
 	struct blkio_cgroup *blkcg;
 	struct request_queue *q = td->queue;
 
+	/* no throttling for dead queue */
+	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
+		return NULL;
+
 	rcu_read_lock();
 	blkcg = task_blkio_cgroup(current);
 	tg = throtl_find_tg(td, blkcg);
@@ -323,32 +324,22 @@
 	/*
 	 * Need to allocate a group. Allocation of group also needs allocation
 	 * of per cpu stats which in-turn takes a mutex() and can block. Hence
-	 * we need to drop rcu lock and queue_lock before we call alloc
-	 *
-	 * Take the request queue reference to make sure queue does not
-	 * go away once we return from allocation.
+	 * we need to drop rcu lock and queue_lock before we call alloc.
 	 */
-	blk_get_queue(q);
 	rcu_read_unlock();
 	spin_unlock_irq(q->queue_lock);
 
 	tg = throtl_alloc_tg(td);
-	/*
-	 * We might have slept in group allocation. Make sure queue is not
-	 * dead
-	 */
-	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) {
-		blk_put_queue(q);
-		if (tg)
-			kfree(tg);
-
-		return ERR_PTR(-ENODEV);
-	}
-	blk_put_queue(q);
 
 	/* Group allocated and queue is still alive. take the lock */
 	spin_lock_irq(q->queue_lock);
 
+	/* Make sure @q is still alive */
+	if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) {
+		kfree(tg);
+		return NULL;
+	}
+
 	/*
 	 * Initialize the new group. After sleeping, read the blkcg again.
 	 */
@@ -1014,11 +1005,6 @@
 	}
 }
 
-static void throtl_td_free(struct throtl_data *td)
-{
-	kfree(td);
-}
-
 /*
  * Blk cgroup controller notification saying that blkio_group object is being
  * delinked as associated cgroup object is going away. That also means that
@@ -1123,17 +1109,17 @@
 	.plid = BLKIO_POLICY_THROTL,
 };
 
-int blk_throtl_bio(struct request_queue *q, struct bio **biop)
+bool blk_throtl_bio(struct request_queue *q, struct bio *bio)
 {
 	struct throtl_data *td = q->td;
 	struct throtl_grp *tg;
-	struct bio *bio = *biop;
 	bool rw = bio_data_dir(bio), update_disptime = true;
 	struct blkio_cgroup *blkcg;
+	bool throttled = false;
 
 	if (bio->bi_rw & REQ_THROTTLED) {
 		bio->bi_rw &= ~REQ_THROTTLED;
-		return 0;
+		goto out;
 	}
 
 	/*
@@ -1152,7 +1138,7 @@
 			blkiocg_update_dispatch_stats(&tg->blkg, bio->bi_size,
 					rw, rw_is_sync(bio->bi_rw));
 			rcu_read_unlock();
-			return 0;
+			goto out;
 		}
 	}
 	rcu_read_unlock();
@@ -1161,18 +1147,10 @@
 	 * Either group has not been allocated yet or it is not an unlimited
 	 * IO group
 	 */
-
 	spin_lock_irq(q->queue_lock);
 	tg = throtl_get_tg(td);
-
-	if (IS_ERR(tg)) {
-		if (PTR_ERR(tg)	== -ENODEV) {
-			/*
-			 * Queue is gone. No queue lock held here.
-			 */
-			return -ENODEV;
-		}
-	}
+	if (unlikely(!tg))
+		goto out_unlock;
 
 	if (tg->nr_queued[rw]) {
 		/*
@@ -1200,7 +1178,7 @@
 		 * So keep on trimming slice even if bio is not queued.
 		 */
 		throtl_trim_slice(td, tg, rw);
-		goto out;
+		goto out_unlock;
 	}
 
 queue_bio:
@@ -1212,16 +1190,52 @@
 			tg->nr_queued[READ], tg->nr_queued[WRITE]);
 
 	throtl_add_bio_tg(q->td, tg, bio);
-	*biop = NULL;
+	throttled = true;
 
 	if (update_disptime) {
 		tg_update_disptime(td, tg);
 		throtl_schedule_next_dispatch(td);
 	}
 
-out:
+out_unlock:
 	spin_unlock_irq(q->queue_lock);
-	return 0;
+out:
+	return throttled;
+}
+
+/**
+ * blk_throtl_drain - drain throttled bios
+ * @q: request_queue to drain throttled bios for
+ *
+ * Dispatch all currently throttled bios on @q through ->make_request_fn().
+ */
+void blk_throtl_drain(struct request_queue *q)
+	__releases(q->queue_lock) __acquires(q->queue_lock)
+{
+	struct throtl_data *td = q->td;
+	struct throtl_rb_root *st = &td->tg_service_tree;
+	struct throtl_grp *tg;
+	struct bio_list bl;
+	struct bio *bio;
+
+	WARN_ON_ONCE(!queue_is_locked(q));
+
+	bio_list_init(&bl);
+
+	while ((tg = throtl_rb_first(st))) {
+		throtl_dequeue_tg(td, tg);
+
+		while ((bio = bio_list_peek(&tg->bio_lists[READ])))
+			tg_dispatch_one_bio(td, tg, bio_data_dir(bio), &bl);
+		while ((bio = bio_list_peek(&tg->bio_lists[WRITE])))
+			tg_dispatch_one_bio(td, tg, bio_data_dir(bio), &bl);
+	}
+	spin_unlock_irq(q->queue_lock);
+
+	while ((bio = bio_list_pop(&bl)))
+		generic_make_request(bio);
+
+	spin_lock_irq(q->queue_lock);
 }
 
 int blk_throtl_init(struct request_queue *q)
@@ -1296,7 +1310,11 @@
 	 * it.
 	 */
 	throtl_shutdown_wq(q);
-	throtl_td_free(td);
+}
+
+void blk_throtl_release(struct request_queue *q)
+{
+	kfree(q->td);
 }
 
 static int __init throtl_init(void)
diff --git a/block/blk.h b/block/blk.h
index 20b900a..3f6551b 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -15,6 +15,7 @@
 			struct bio *bio);
 int blk_rq_append_bio(struct request_queue *q, struct request *rq,
 		      struct bio *bio);
+void blk_drain_queue(struct request_queue *q, bool drain_all);
 void blk_dequeue_request(struct request *rq);
 void __blk_queue_free_tags(struct request_queue *q);
 bool __blk_end_bidi_request(struct request *rq, int error,
@@ -188,4 +189,21 @@
 	        (rq->cmd_flags & REQ_DISCARD));
 }
 
-#endif
+#ifdef CONFIG_BLK_DEV_THROTTLING
+extern bool blk_throtl_bio(struct request_queue *q, struct bio *bio);
+extern void blk_throtl_drain(struct request_queue *q);
+extern int blk_throtl_init(struct request_queue *q);
+extern void blk_throtl_exit(struct request_queue *q);
+extern void blk_throtl_release(struct request_queue *q);
+#else /* CONFIG_BLK_DEV_THROTTLING */
+static inline bool blk_throtl_bio(struct request_queue *q, struct bio *bio)
+{
+	return false;
+}
+static inline void blk_throtl_drain(struct request_queue *q) { }
+static inline int blk_throtl_init(struct request_queue *q) { return 0; }
+static inline void blk_throtl_exit(struct request_queue *q) { }
+static inline void blk_throtl_release(struct request_queue *q) { }
+#endif /* CONFIG_BLK_DEV_THROTTLING */
+
+#endif /* BLK_INTERNAL_H */
diff --git a/block/bsg-lib.c b/block/bsg-lib.c
index 6690e6e..7ad49c8 100644
--- a/block/bsg-lib.c
+++ b/block/bsg-lib.c
@@ -25,7 +25,7 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/bsg-lib.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <scsi/scsi_cmnd.h>
 
 /**
diff --git a/block/elevator.c b/block/elevator.c
index a3b64bc..66343d6 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/compiler.h>
-#include <linux/delay.h>
 #include <linux/blktrace_api.h>
 #include <linux/hash.h>
 #include <linux/uaccess.h>
@@ -182,7 +181,7 @@
 	eq->elevator_data = data;
 }
 
-static char chosen_elevator[16];
+static char chosen_elevator[ELV_NAME_MAX];
 
 static int __init elevator_setup(char *str)
 {
@@ -606,43 +605,35 @@
 void elv_drain_elevator(struct request_queue *q)
 {
 	static int printed;
+
+	lockdep_assert_held(q->queue_lock);
+
 	while (q->elevator->ops->elevator_dispatch_fn(q, 1))
 		;
-	if (q->nr_sorted == 0)
-		return;
-	if (printed++ < 10) {
+	if (q->nr_sorted && printed++ < 10) {
 		printk(KERN_ERR "%s: forced dispatching is broken "
 		       "(nr_sorted=%u), please report this\n",
 		       q->elevator->elevator_type->elevator_name, q->nr_sorted);
 	}
 }
 
-/*
- * Call with queue lock held, interrupts disabled
- */
 void elv_quiesce_start(struct request_queue *q)
 {
 	if (!q->elevator)
 		return;
 
+	spin_lock_irq(q->queue_lock);
 	queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
+	spin_unlock_irq(q->queue_lock);
 
-	/*
-	 * make sure we don't have any requests in flight
-	 */
-	elv_drain_elevator(q);
-	while (q->rq.elvpriv) {
-		__blk_run_queue(q);
-		spin_unlock_irq(q->queue_lock);
-		msleep(10);
-		spin_lock_irq(q->queue_lock);
-		elv_drain_elevator(q);
-	}
+	blk_drain_queue(q, false);
 }
 
 void elv_quiesce_end(struct request_queue *q)
 {
+	spin_lock_irq(q->queue_lock);
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
+	spin_unlock_irq(q->queue_lock);
 }
 
 void __elv_add_request(struct request_queue *q, struct request *rq, int where)
@@ -972,7 +963,6 @@
 	/*
 	 * Turn on BYPASS and drain all requests w/ elevator private data
 	 */
-	spin_lock_irq(q->queue_lock);
 	elv_quiesce_start(q);
 
 	/*
@@ -983,8 +973,8 @@
 	/*
 	 * attach and start new elevator
 	 */
+	spin_lock_irq(q->queue_lock);
 	elevator_attach(q, e, data);
-
 	spin_unlock_irq(q->queue_lock);
 
 	if (old_elevator->registered) {
@@ -999,9 +989,7 @@
 	 * finally exit old elevator and turn off BYPASS.
 	 */
 	elevator_exit(old_elevator);
-	spin_lock_irq(q->queue_lock);
 	elv_quiesce_end(q);
-	spin_unlock_irq(q->queue_lock);
 
 	blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
 
@@ -1015,10 +1003,7 @@
 	elevator_exit(e);
 	q->elevator = old_elevator;
 	elv_register_queue(q);
-
-	spin_lock_irq(q->queue_lock);
-	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
-	spin_unlock_irq(q->queue_lock);
+	elv_quiesce_end(q);
 
 	return err;
 }
diff --git a/block/genhd.c b/block/genhd.c
index 94855a9..02e9fca 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -19,7 +19,6 @@
 #include <linux/mutex.h>
 #include <linux/idr.h>
 #include <linux/log2.h>
-#include <linux/ctype.h>
 
 #include "blk.h"
 
@@ -537,7 +536,7 @@
 	disk->slave_dir = kobject_create_and_add("slaves", &ddev->kobj);
 
 	/* No minors to use for partitions */
-	if (!disk_partitionable(disk))
+	if (!disk_part_scan_enabled(disk))
 		goto exit;
 
 	/* No such device (e.g., media were just removed) */
@@ -612,6 +611,12 @@
 	register_disk(disk);
 	blk_register_queue(disk);
 
+	/*
+	 * Take an extra ref on queue which will be put on disk_release()
+	 * so that it sticks around as long as @disk is there.
+	 */
+	WARN_ON_ONCE(blk_get_queue(disk->queue));
+
 	retval = sysfs_create_link(&disk_to_dev(disk)->kobj, &bdi->dev->kobj,
 				   "bdi");
 	WARN_ON(retval);
@@ -842,7 +847,7 @@
 	char buf[BDEVNAME_SIZE];
 
 	/* Don't show non-partitionable removeable devices or empty devices */
-	if (!get_capacity(sgp) || (!disk_partitionable(sgp) &&
+	if (!get_capacity(sgp) || (!disk_max_parts(sgp) &&
 				   (sgp->flags & GENHD_FL_REMOVABLE)))
 		return 0;
 	if (sgp->flags & GENHD_FL_SUPPRESS_PARTITION_INFO)
@@ -910,74 +915,6 @@
 
 subsys_initcall(genhd_device_init);
 
-static ssize_t alias_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	struct gendisk *disk = dev_to_disk(dev);
-	ssize_t ret = 0;
-
-	if (disk->alias)
-		ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias);
-	return ret;
-}
-
-static ssize_t alias_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct gendisk *disk = dev_to_disk(dev);
-	char *alias;
-	char *envp[] = { NULL, NULL };
-	unsigned char c;
-	int i;
-	ssize_t ret = count;
-
-	if (!count)
-		return -EINVAL;
-
-	if (count >= ALIAS_LEN) {
-		printk(KERN_ERR "alias: alias is too long\n");
-		return -EINVAL;
-	}
-
-	/* Validation check */
-	for (i = 0; i < count; i++) {
-		c = buf[i];
-		if (i == count - 1 && c == '\n')
-			break;
-		if (!isalnum(c) && c != '_' && c != '-') {
-			printk(KERN_ERR "alias: invalid alias\n");
-			return -EINVAL;
-		}
-	}
-
-	if (disk->alias) {
-		printk(KERN_INFO "alias: %s is already assigned (%s)\n",
-		       disk->disk_name, disk->alias);
-		return -EINVAL;
-	}
-
-	alias = kasprintf(GFP_KERNEL, "%s", buf);
-	if (!alias)
-		return -ENOMEM;
-
-	if (alias[count - 1] == '\n')
-		alias[count - 1] = '\0';
-
-	envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias);
-	if (!envp[0]) {
-		kfree(alias);
-		return -ENOMEM;
-	}
-
-	disk->alias = alias;
-	printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name);
-
-	kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp);
-
-	kfree(envp[0]);
-	return ret;
-}
-
 static ssize_t disk_range_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
@@ -1037,7 +974,6 @@
 	return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
 }
 
-static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store);
 static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
 static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
 static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
@@ -1060,7 +996,6 @@
 #endif
 
 static struct attribute *disk_attrs[] = {
-	&dev_attr_alias.attr,
 	&dev_attr_range.attr,
 	&dev_attr_ext_range.attr,
 	&dev_attr_removable.attr,
@@ -1166,6 +1101,8 @@
 	disk_replace_part_tbl(disk, NULL);
 	free_part_stats(&disk->part0);
 	free_part_info(&disk->part0);
+	if (disk->queue)
+		blk_put_queue(disk->queue);
 	kfree(disk);
 }
 struct class block_class = {
diff --git a/block/ioctl.c b/block/ioctl.c
index 1124cd2..ca939fc 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -1,5 +1,6 @@
 #include <linux/capability.h>
 #include <linux/blkdev.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 #include <linux/blkpg.h>
 #include <linux/hdreg.h>
@@ -101,7 +102,7 @@
 	struct gendisk *disk = bdev->bd_disk;
 	int res;
 
-	if (!disk_partitionable(disk) || bdev != bdev->bd_contains)
+	if (!disk_part_scan_enabled(disk) || bdev != bdev->bd_contains)
 		return -EINVAL;
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 4f4230b..fbdf0d8 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -565,7 +565,7 @@
 {
 	int err;
 
-	if (!q || blk_get_queue(q))
+	if (!q)
 		return -ENXIO;
 
 	switch (cmd) {
@@ -686,7 +686,6 @@
 			err = -ENOTTY;
 	}
 
-	blk_put_queue(q);
 	return err;
 }
 EXPORT_SYMBOL(scsi_cmd_ioctl);
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index a816f24..a0f768c 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -383,6 +383,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -404,6 +405,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
@@ -457,6 +464,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -478,6 +486,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/aead.c b/crypto/aead.c
index 701556f..04add3dc 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -111,6 +111,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_aead raead;
@@ -132,6 +133,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
@@ -190,6 +197,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_aead raead;
@@ -210,6 +218,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 
 static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
diff --git a/crypto/ahash.c b/crypto/ahash.c
index a3e6ef9..ac93c99 100644
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -399,6 +399,7 @@
 	return sizeof(struct crypto_shash *);
 }
 
+#ifdef CONFIG_NET
 static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_hash rhash;
@@ -416,6 +417,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/async_tx/async_memcpy.c b/crypto/async_tx/async_memcpy.c
index 518c22b..0d5a90c 100644
--- a/crypto/async_tx/async_memcpy.c
+++ b/crypto/async_tx/async_memcpy.c
@@ -25,6 +25,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/async_tx.h>
diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index fdd8257..91d5d38 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -21,6 +21,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>
diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c
index ce038d8..a9f08a6 100644
--- a/crypto/async_tx/async_raid6_recov.c
+++ b/crypto/async_tx/async_raid6_recov.c
@@ -22,6 +22,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 7f2c00a..8421209 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -24,6 +24,7 @@
  *
  */
 #include <linux/rculist.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/async_tx.h>
 
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index bc28337..154cc84 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -25,6 +25,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/raid/xor.h>
diff --git a/crypto/async_tx/raid6test.c b/crypto/async_tx/raid6test.c
index c88ff9e..aa2b027 100644
--- a/crypto/async_tx/raid6test.c
+++ b/crypto/async_tx/raid6test.c
@@ -23,6 +23,7 @@
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/random.h>
+#include <linux/module.h>
 
 #undef pr
 #define pr(fmt, args...) pr_info("raid6test: " fmt, ##args)
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 2572d26..1e61d1a 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -494,6 +494,7 @@
 		return crypto_init_blkcipher_ops_async(tfm);
 }
 
+#ifdef CONFIG_NET
 static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -515,6 +516,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c
index 2abca78..0605a2b 100644
--- a/crypto/crypto_user.c
+++ b/crypto/crypto_user.c
@@ -44,9 +44,6 @@
 
 	down_read(&crypto_alg_sem);
 
-	if (list_empty(&crypto_alg_list))
-		return NULL;
-
 	list_for_each_entry(q, &crypto_alg_list, cra_list) {
 		int match = 0;
 
diff --git a/crypto/crypto_wq.c b/crypto/crypto_wq.c
index b980ee1..adad92a 100644
--- a/crypto/crypto_wq.c
+++ b/crypto/crypto_wq.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <crypto/algapi.h>
 #include <crypto/crypto_wq.h>
 
diff --git a/crypto/md4.c b/crypto/md4.c
index 7fca1f59..0477a6a 100644
--- a/crypto/md4.c
+++ b/crypto/md4.c
@@ -23,6 +23,7 @@
 #include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index fefda78..2e458e5 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -48,6 +48,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_comp rpcomp;
@@ -62,6 +63,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/proc.c b/crypto/proc.c
index 3808697..4a0a7aa 100644
--- a/crypto/proc.c
+++ b/crypto/proc.c
@@ -16,6 +16,7 @@
 #include <linux/atomic.h>
 #include <linux/init.h>
 #include <linux/crypto.h>
+#include <linux/module.h>	/* for module_name() */
 #include <linux/rwsem.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
diff --git a/crypto/rng.c b/crypto/rng.c
index feb7de0..64f864f 100644
--- a/crypto/rng.c
+++ b/crypto/rng.c
@@ -60,6 +60,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_rng rrng;
@@ -76,6 +77,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/shash.c b/crypto/shash.c
index ea8a9c6..91009127 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -524,6 +524,7 @@
 	return alg->cra_ctxsize;
 }
 
+#ifdef CONFIG_NET
 static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_hash rhash;
@@ -541,6 +542,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/vmac.c b/crypto/vmac.c
index f35ff8a..4243905 100644
--- a/crypto/vmac.c
+++ b/crypto/vmac.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/crypto.h>
+#include <linux/module.h>
 #include <linux/scatterlist.h>
 #include <asm/byteorder.h>
 #include <crypto/scatterwalk.h>
diff --git a/crypto/xcbc.c b/crypto/xcbc.c
index bb7b67f..a5fbdf3 100644
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -22,6 +22,7 @@
 #include <crypto/internal/hash.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 static u_int32_t ks[12] = {0x01010101, 0x01010101, 0x01010101, 0x01010101,
 			   0x02020202, 0x02020202, 0x02020202, 0x02020202,
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index e114140..f4f523b 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index c57b5c7..20516e5 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "actables.h"
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 52aaff3..f06a3ee 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acevents.h"
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index 00cd956..aee887e 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 55accb7..cc70f3f 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -269,16 +269,17 @@
 
 	status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
 					ACPI_BITMASK_ALL_FIXED_STATUS);
-	if (ACPI_FAILURE(status)) {
-		goto unlock_and_exit;
-	}
+
+	acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+
+	if (ACPI_FAILURE(status))
+		goto exit;
 
 	/* Clear the GPE Bits in all GPE registers in all GPE blocks */
 
 	status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
 
-      unlock_and_exit:
-	acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+exit:
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 2ac28bb..d52da30 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -46,6 +46,7 @@
 #include "accommon.h"
 #include "actables.h"
 #include <linux/tboot.h>
+#include <linux/module.h>
 
 #define _COMPONENT          ACPI_HARDWARE
 ACPI_MODULE_NAME("hwsleep")
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index 9c8eb71..50d21c4 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index f75f81a..c2793a8 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index c53f004..e7f016d 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 3fd4526..83bf930 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index db7660f..57e6d82 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index 2ff657a..fe86b37 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acresrc.h"
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 4b7085d..e7d13f5 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -42,6 +42,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index a9bcd81..a1f8d75 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index 97cb36f..8b087e2 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 833a38a..ffba0a3 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -43,6 +43,7 @@
 
 #define DEFINE_ACPI_GLOBALS
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 98ad125..420ebfe 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acevents.h"
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index 916ae09..8d0245e 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -41,6 +41,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#include <linux/export.h>
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 1274080..631b947 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -932,7 +932,8 @@
 static int erst_open_pstore(struct pstore_info *psi);
 static int erst_close_pstore(struct pstore_info *psi);
 static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
-			   struct timespec *time, struct pstore_info *psi);
+			   struct timespec *time, char **buf,
+			   struct pstore_info *psi);
 static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part,
 		       size_t size, struct pstore_info *psi);
 static int erst_clearer(enum pstore_type_id type, u64 id,
@@ -986,17 +987,23 @@
 }
 
 static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
-			   struct timespec *time, struct pstore_info *psi)
+			   struct timespec *time, char **buf,
+			   struct pstore_info *psi)
 {
 	int rc;
 	ssize_t len = 0;
 	u64 record_id;
-	struct cper_pstore_record *rcd = (struct cper_pstore_record *)
-					(erst_info.buf - sizeof(*rcd));
+	struct cper_pstore_record *rcd;
+	size_t rcd_len = sizeof(*rcd) + erst_info.bufsize;
 
 	if (erst_disable)
 		return -ENODEV;
 
+	rcd = kmalloc(rcd_len, GFP_KERNEL);
+	if (!rcd) {
+		rc = -ENOMEM;
+		goto out;
+	}
 skip:
 	rc = erst_get_record_id_next(&reader_pos, &record_id);
 	if (rc)
@@ -1004,22 +1011,27 @@
 
 	/* no more record */
 	if (record_id == APEI_ERST_INVALID_RECORD_ID) {
-		rc = -1;
+		rc = -EINVAL;
 		goto out;
 	}
 
-	len = erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
-			erst_info.bufsize);
+	len = erst_read(record_id, &rcd->hdr, rcd_len);
 	/* The record may be cleared by others, try read next record */
 	if (len == -ENOENT)
 		goto skip;
-	else if (len < 0) {
-		rc = -1;
+	else if (len < sizeof(*rcd)) {
+		rc = -EIO;
 		goto out;
 	}
 	if (uuid_le_cmp(rcd->hdr.creator_id, CPER_CREATOR_PSTORE) != 0)
 		goto skip;
 
+	*buf = kmalloc(len, GFP_KERNEL);
+	if (*buf == NULL) {
+		rc = -ENOMEM;
+		goto out;
+	}
+	memcpy(*buf, rcd->data, len - sizeof(*rcd));
 	*id = record_id;
 	if (uuid_le_cmp(rcd->sec_hdr.section_type,
 			CPER_SECTION_TYPE_DMESG) == 0)
@@ -1037,6 +1049,7 @@
 	time->tv_nsec = 0;
 
 out:
+	kfree(rcd);
 	return (rc < 0) ? rc : (len - sizeof(*rcd));
 }
 
diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
index 7489b89c3..cfc0cc1 100644
--- a/drivers/acpi/atomicio.c
+++ b/drivers/acpi/atomicio.c
@@ -24,7 +24,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
@@ -76,7 +76,7 @@
 {
 	struct acpi_iomap *map;
 
-	map = __acpi_find_iomap(paddr, size);
+	map = __acpi_find_iomap(paddr, size/8);
 	if (map)
 		return map->vaddr + (paddr - map->paddr);
 	else
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index af308d0..cb96296 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -28,7 +28,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 437ddbf..9ecec98 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -911,10 +911,7 @@
 	}
 #endif
 
-	status =
-	    acpi_enable_subsystem(~
-				  (ACPI_NO_HARDWARE_INIT |
-				   ACPI_NO_ACPI_ENABLE));
+	status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
 		goto error0;
@@ -935,8 +932,7 @@
 
 	acpi_os_initialize1();
 
-	status =
-	    acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
+	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX
 		       "Unable to start the ACPI Interpreter\n");
diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c
index 182a9fc..b55d6a2 100644
--- a/drivers/acpi/debugfs.c
+++ b/drivers/acpi/debugfs.c
@@ -2,6 +2,7 @@
  * debugfs.c - ACPI debugfs interface to userspace.
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
 #include <acpi/acpi_drivers.h>
diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c
index 22f918b..6c47ae9 100644
--- a/drivers/acpi/ec_sys.c
+++ b/drivers/acpi/ec_sys.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/acpi.h>
 #include <linux/debugfs.h>
+#include <linux/module.h>
 #include "internal.h"
 
 MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index 85d9089..1442737 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/poll.h>
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 7c47ed5..29a4a5c 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -6,6 +6,7 @@
  *
  * This file is released under the GPLv2.
  */
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/device.h>
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index f5f9869..251c7b62 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -1,5 +1,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/bcd.h>
 #include <asm/uaccess.h>
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 02d2a4c..3a0428e 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -7,6 +7,7 @@
  *	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  *	- Added _PDC for platforms with Intel CPUs
  */
+#include <linux/export.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
 
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index a4e0f1b..9d7bc9f 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -426,7 +426,7 @@
 
 	if (action == CPU_ONLINE && pr) {
 		acpi_processor_ppc_has_changed(pr, 0);
-		acpi_processor_cst_has_changed(pr);
+		acpi_processor_hotplug(pr);
 		acpi_processor_reevaluate_tstate(pr, action);
 		acpi_processor_tstate_has_changed(pr);
 	}
@@ -503,8 +503,7 @@
 	acpi_processor_get_throttling_info(pr);
 	acpi_processor_get_limit_info(pr);
 
-
-	if (cpuidle_get_driver() == &acpi_idle_driver)
+	if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver)
 		acpi_processor_power_init(pr, device);
 
 	pr->cdev = thermal_cooling_device_register("Processor", device,
@@ -800,17 +799,9 @@
 
 	memset(&errata, 0, sizeof(errata));
 
-	if (!cpuidle_register_driver(&acpi_idle_driver)) {
-		printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
-			acpi_idle_driver.name);
-	} else {
-		printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
-			cpuidle_get_driver()->name);
-	}
-
 	result = acpi_bus_register_driver(&acpi_processor_driver);
 	if (result < 0)
-		goto out_cpuidle;
+		return result;
 
 	acpi_processor_install_hotplug_notify();
 
@@ -821,11 +812,6 @@
 	acpi_processor_throttling_init();
 
 	return 0;
-
-out_cpuidle:
-	cpuidle_unregister_driver(&acpi_idle_driver);
-
-	return result;
 }
 
 static void __exit acpi_processor_exit(void)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 9b88f98..0e8e2de 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -224,7 +224,6 @@
 /*
  * Suspend / resume control
  */
-static int acpi_idle_suspend;
 static u32 saved_bm_rld;
 
 static void acpi_idle_bm_rld_save(void)
@@ -243,21 +242,13 @@
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
-	if (acpi_idle_suspend == 1)
-		return 0;
-
 	acpi_idle_bm_rld_save();
-	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
-	if (acpi_idle_suspend == 0)
-		return 0;
-
 	acpi_idle_bm_rld_restore();
-	acpi_idle_suspend = 0;
 	return 0;
 }
 
@@ -741,66 +732,65 @@
 /**
  * acpi_idle_enter_c1 - enters an ACPI C1 state-type
  * @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver containing cpuidle state info
+ * @index: index of target state
  *
  * This is equivalent to the HALT instruction.
  */
 static int acpi_idle_enter_c1(struct cpuidle_device *dev,
-			      struct cpuidle_state *state)
+		struct cpuidle_driver *drv, int index)
 {
 	ktime_t  kt1, kt2;
 	s64 idle_time;
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
 
 	pr = __this_cpu_read(processors);
+	dev->last_residency = 0;
 
 	if (unlikely(!pr))
-		return 0;
+		return -EINVAL;
 
 	local_irq_disable();
 
-	/* Do not access any ACPI IO ports in suspend path */
-	if (acpi_idle_suspend) {
-		local_irq_enable();
-		cpu_relax();
-		return 0;
-	}
-
 	lapic_timer_state_broadcast(pr, cx, 1);
 	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
 	kt2 = ktime_get_real();
 	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
+	/* Update device last_residency*/
+	dev->last_residency = (int)idle_time;
+
 	local_irq_enable();
 	cx->usage++;
 	lapic_timer_state_broadcast(pr, cx, 0);
 
-	return idle_time;
+	return index;
 }
 
 /**
  * acpi_idle_enter_simple - enters an ACPI state without BM handling
  * @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver with cpuidle state information
+ * @index: the index of suggested state
  */
 static int acpi_idle_enter_simple(struct cpuidle_device *dev,
-				  struct cpuidle_state *state)
+		struct cpuidle_driver *drv, int index)
 {
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
 
 	pr = __this_cpu_read(processors);
+	dev->last_residency = 0;
 
 	if (unlikely(!pr))
-		return 0;
-
-	if (acpi_idle_suspend)
-		return(acpi_idle_enter_c1(dev, state));
+		return -EINVAL;
 
 	local_irq_disable();
 
@@ -815,7 +805,7 @@
 		if (unlikely(need_resched())) {
 			current_thread_info()->status |= TS_POLLING;
 			local_irq_enable();
-			return 0;
+			return -EINVAL;
 		}
 	}
 
@@ -837,6 +827,9 @@
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
+	/* Update device last_residency*/
+	dev->last_residency = (int)idle_time;
+
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -848,7 +841,7 @@
 
 	lapic_timer_state_broadcast(pr, cx, 0);
 	cx->time += idle_time;
-	return idle_time;
+	return index;
 }
 
 static int c3_cpu_count;
@@ -857,37 +850,37 @@
 /**
  * acpi_idle_enter_bm - enters C3 with proper BM handling
  * @dev: the target CPU
- * @state: the state data
+ * @drv: cpuidle driver containing state data
+ * @index: the index of suggested state
  *
  * If BM is detected, the deepest non-C3 idle state is entered instead.
  */
 static int acpi_idle_enter_bm(struct cpuidle_device *dev,
-			      struct cpuidle_state *state)
+		struct cpuidle_driver *drv, int index)
 {
 	struct acpi_processor *pr;
-	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
 
 
 	pr = __this_cpu_read(processors);
+	dev->last_residency = 0;
 
 	if (unlikely(!pr))
-		return 0;
-
-	if (acpi_idle_suspend)
-		return(acpi_idle_enter_c1(dev, state));
+		return -EINVAL;
 
 	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
-		if (dev->safe_state) {
-			dev->last_state = dev->safe_state;
-			return dev->safe_state->enter(dev, dev->safe_state);
+		if (drv->safe_state_index >= 0) {
+			return drv->states[drv->safe_state_index].enter(dev,
+						drv, drv->safe_state_index);
 		} else {
 			local_irq_disable();
 			acpi_safe_halt();
 			local_irq_enable();
-			return 0;
+			return -EINVAL;
 		}
 	}
 
@@ -904,7 +897,7 @@
 		if (unlikely(need_resched())) {
 			current_thread_info()->status |= TS_POLLING;
 			local_irq_enable();
-			return 0;
+			return -EINVAL;
 		}
 	}
 
@@ -954,6 +947,9 @@
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
+	/* Update device last_residency*/
+	dev->last_residency = (int)idle_time;
+
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -965,7 +961,7 @@
 
 	lapic_timer_state_broadcast(pr, cx, 0);
 	cx->time += idle_time;
-	return idle_time;
+	return index;
 }
 
 struct cpuidle_driver acpi_idle_driver = {
@@ -974,14 +970,16 @@
 };
 
 /**
- * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
+ * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE
+ * device i.e. per-cpu data
+ *
  * @pr: the ACPI processor
  */
-static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
+static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
 {
 	int i, count = CPUIDLE_DRIVER_STATE_START;
 	struct acpi_processor_cx *cx;
-	struct cpuidle_state *state;
+	struct cpuidle_state_usage *state_usage;
 	struct cpuidle_device *dev = &pr->power.dev;
 
 	if (!pr->flags.power_setup_done)
@@ -992,17 +990,13 @@
 	}
 
 	dev->cpu = pr->id;
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
-	}
 
 	if (max_cstate == 0)
 		max_cstate = 1;
 
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		cx = &pr->power.states[i];
-		state = &dev->states[count];
+		state_usage = &dev->states_usage[count];
 
 		if (!cx->valid)
 			continue;
@@ -1013,8 +1007,64 @@
 		    !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 			continue;
 #endif
-		cpuidle_set_statedata(state, cx);
 
+		cpuidle_set_statedata(state_usage, cx);
+
+		count++;
+		if (count == CPUIDLE_STATE_MAX)
+			break;
+	}
+
+	dev->state_count = count;
+
+	if (!count)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * acpi_processor_setup_cpuidle states- prepares and configures cpuidle
+ * global state data i.e. idle routines
+ *
+ * @pr: the ACPI processor
+ */
+static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
+{
+	int i, count = CPUIDLE_DRIVER_STATE_START;
+	struct acpi_processor_cx *cx;
+	struct cpuidle_state *state;
+	struct cpuidle_driver *drv = &acpi_idle_driver;
+
+	if (!pr->flags.power_setup_done)
+		return -EINVAL;
+
+	if (pr->flags.power == 0)
+		return -EINVAL;
+
+	drv->safe_state_index = -1;
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
+		drv->states[i].name[0] = '\0';
+		drv->states[i].desc[0] = '\0';
+	}
+
+	if (max_cstate == 0)
+		max_cstate = 1;
+
+	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
+		cx = &pr->power.states[i];
+
+		if (!cx->valid)
+			continue;
+
+#ifdef CONFIG_HOTPLUG_CPU
+		if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+		    !pr->flags.has_cst &&
+		    !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
+			continue;
+#endif
+
+		state = &drv->states[count];
 		snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
 		strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
 		state->exit_latency = cx->latency;
@@ -1027,13 +1077,13 @@
 				state->flags |= CPUIDLE_FLAG_TIME_VALID;
 
 			state->enter = acpi_idle_enter_c1;
-			dev->safe_state = state;
+			drv->safe_state_index = count;
 			break;
 
 			case ACPI_STATE_C2:
 			state->flags |= CPUIDLE_FLAG_TIME_VALID;
 			state->enter = acpi_idle_enter_simple;
-			dev->safe_state = state;
+			drv->safe_state_index = count;
 			break;
 
 			case ACPI_STATE_C3:
@@ -1049,7 +1099,7 @@
 			break;
 	}
 
-	dev->state_count = count;
+	drv->state_count = count;
 
 	if (!count)
 		return -EINVAL;
@@ -1057,7 +1107,7 @@
 	return 0;
 }
 
-int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+int acpi_processor_hotplug(struct acpi_processor *pr)
 {
 	int ret = 0;
 
@@ -1078,7 +1128,7 @@
 	cpuidle_disable_device(&pr->power.dev);
 	acpi_processor_get_power_info(pr);
 	if (pr->flags.power) {
-		acpi_processor_setup_cpuidle(pr);
+		acpi_processor_setup_cpuidle_cx(pr);
 		ret = cpuidle_enable_device(&pr->power.dev);
 	}
 	cpuidle_resume_and_unlock();
@@ -1086,10 +1136,72 @@
 	return ret;
 }
 
+int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+{
+	int cpu;
+	struct acpi_processor *_pr;
+
+	if (disabled_by_idle_boot_param())
+		return 0;
+
+	if (!pr)
+		return -EINVAL;
+
+	if (nocst)
+		return -ENODEV;
+
+	if (!pr->flags.power_setup_done)
+		return -ENODEV;
+
+	/*
+	 * FIXME:  Design the ACPI notification to make it once per
+	 * system instead of once per-cpu.  This condition is a hack
+	 * to make the code that updates C-States be called once.
+	 */
+
+	if (smp_processor_id() == 0 &&
+			cpuidle_get_driver() == &acpi_idle_driver) {
+
+		cpuidle_pause_and_lock();
+		/* Protect against cpu-hotplug */
+		get_online_cpus();
+
+		/* Disable all cpuidle devices */
+		for_each_online_cpu(cpu) {
+			_pr = per_cpu(processors, cpu);
+			if (!_pr || !_pr->flags.power_setup_done)
+				continue;
+			cpuidle_disable_device(&_pr->power.dev);
+		}
+
+		/* Populate Updated C-state information */
+		acpi_processor_setup_cpuidle_states(pr);
+
+		/* Enable all cpuidle devices */
+		for_each_online_cpu(cpu) {
+			_pr = per_cpu(processors, cpu);
+			if (!_pr || !_pr->flags.power_setup_done)
+				continue;
+			acpi_processor_get_power_info(_pr);
+			if (_pr->flags.power) {
+				acpi_processor_setup_cpuidle_cx(_pr);
+				cpuidle_enable_device(&_pr->power.dev);
+			}
+		}
+		put_online_cpus();
+		cpuidle_resume_and_unlock();
+	}
+
+	return 0;
+}
+
+static int acpi_processor_registered;
+
 int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
 			      struct acpi_device *device)
 {
 	acpi_status status = 0;
+	int retval;
 	static int first_run;
 
 	if (disabled_by_idle_boot_param())
@@ -1126,9 +1238,26 @@
 	 * platforms that only support C1.
 	 */
 	if (pr->flags.power) {
-		acpi_processor_setup_cpuidle(pr);
-		if (cpuidle_register_device(&pr->power.dev))
-			return -EIO;
+		/* Register acpi_idle_driver if not already registered */
+		if (!acpi_processor_registered) {
+			acpi_processor_setup_cpuidle_states(pr);
+			retval = cpuidle_register_driver(&acpi_idle_driver);
+			if (retval)
+				return retval;
+			printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
+					acpi_idle_driver.name);
+		}
+		/* Register per-cpu cpuidle_device. Cpuidle driver
+		 * must already be registered before registering device
+		 */
+		acpi_processor_setup_cpuidle_cx(pr);
+		retval = cpuidle_register_device(&pr->power.dev);
+		if (retval) {
+			if (acpi_processor_registered == 0)
+				cpuidle_unregister_driver(&acpi_idle_driver);
+			return retval;
+		}
+		acpi_processor_registered++;
 	}
 	return 0;
 }
@@ -1139,8 +1268,13 @@
 	if (disabled_by_idle_boot_param())
 		return 0;
 
-	cpuidle_unregister_device(&pr->power.dev);
-	pr->flags.power_setup_done = 0;
+	if (pr->flags.power) {
+		cpuidle_unregister_device(&pr->power.dev);
+		acpi_processor_registered--;
+		if (acpi_processor_registered == 0)
+			cpuidle_unregister_driver(&acpi_idle_driver);
+	}
 
+	pr->flags.power_setup_done = 0;
 	return 0;
 }
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index f8be23b..f8d2a47 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -13,6 +13,7 @@
 #include <linux/wait.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include "sbshc.h"
 
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 449c556..8ab80ba 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1062,13 +1062,12 @@
 	if (!id)
 		return;
 
-	id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+	id->id = kstrdup(dev_id, GFP_KERNEL);
 	if (!id->id) {
 		kfree(id);
 		return;
 	}
 
-	strcpy(id->id, dev_id);
 	list_add_tail(&id->list, &device->pnp.ids);
 }
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 0e46fae..6d9a3ab 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -398,6 +398,14 @@
 	},
 	{
 	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB17FX",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
 	.ident = "Sony Vaio VGN-SR11M",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index c538d0e..9f66181 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -706,11 +706,23 @@
 	return;
 }
 
+static ssize_t
+acpi_show_profile(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	return sprintf(buf, "%d\n", acpi_gbl_FADT.preferred_profile);
+}
+
+static const struct device_attribute pm_profile_attr =
+	__ATTR(pm_profile, S_IRUGO, acpi_show_profile, NULL);
+
 int __init acpi_sysfs_init(void)
 {
 	int result;
 
 	result = acpi_tables_sysfs_init();
-
+	if (result)
+		return result;
+	result = sysfs_create_file(acpi_kobj, &pm_profile_attr.attr);
 	return result;
 }
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 5af3479..f3f0fe7 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -33,6 +33,7 @@
  *
  */
 
+#include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 #include <linux/pci.h>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fb7b90b..cf26222 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -390,6 +390,9 @@
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
 
+	/* Asmedia */
+	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1061 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index c03277d..43b8758 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -65,9 +65,9 @@
 static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct ata_port_info pi = ahci_port_info[id->driver_data];
+	struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
@@ -191,7 +191,7 @@
 static int __devexit ahci_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
 
 	ata_host_detach(host);
@@ -202,11 +202,18 @@
 	return 0;
 }
 
+static const struct of_device_id ahci_of_match[] = {
+	{ .compatible = "calxeda,hb-ahci", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
 static struct platform_driver ahci_driver = {
 	.remove = __devexit_p(ahci_remove),
 	.driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
+		.of_match_table = ahci_of_match,
 	},
 	.id_table	= ahci_devtype,
 };
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c021186..a9b2820 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -34,6 +34,7 @@
 
 #include <linux/kernel.h>
 #include <linux/blkdev.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
@@ -2882,7 +2883,7 @@
 	    sata_scr_read(link, SCR_STATUS, &sstatus))
 		rc = -ERESTART;
 
-	if (rc == -ERESTART || try >= max_tries) {
+	if (try >= max_tries) {
 		/*
 		 * Thaw host port even if reset failed, so that the port
 		 * can be retried on the next phy event.  This risks
@@ -2908,6 +2909,16 @@
 		ata_eh_acquire(ap);
 	}
 
+	/*
+	 * While disks spinup behind PMP, some controllers fail sending SRST.
+	 * They need to be reset - as well as the PMP - before retrying.
+	 */
+	if (rc == -ERESTART) {
+		if (ata_is_host_link(link))
+			ata_eh_thaw_port(ap);
+		goto out;
+	}
+
 	if (try == max_tries - 1) {
 		sata_down_spd_limit(link, 0);
 		if (slave)
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 3eb2b81..21b80c5 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/libata.h>
 #include <linux/slab.h>
 #include "libata.h"
@@ -388,12 +389,9 @@
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable and SRST
-			 * times out under certain configurations.
-			 */
+			/* Class code report is unreliable. */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_NO_SRST |
-					       ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 19ba770..2a5412e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -37,6 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/blkdev.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
@@ -1216,6 +1217,10 @@
 
 /**
  *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ *	@ap: ATA port to which the device change the queue depth
+ *	@sdev: SCSI device to configure queue depth for
+ *	@queue_depth: new queue depth
+ *	@reason: calling context
  *
  *	libsas and libata have different approaches for associating a sdev to
  *	its ata_port.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 239bfa6..4cadfa2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/gfp.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <linux/libata.h>
 #include <linux/highmem.h>
 
@@ -2532,10 +2533,12 @@
 	if (rc)
 		goto out;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma)
 		/* prepare and activate BMDMA host */
 		rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	else
+#endif
 		/* prepare and activate SFF host */
 		rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
@@ -2543,10 +2546,12 @@
 	host->private_data = host_priv;
 	host->flags |= hflags;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma) {
 		pci_set_master(pdev);
 		rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
 	} else
+#endif
 		rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index a72ab0d..2a472c5 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -52,7 +52,7 @@
 	}
 
 	ret = of_irq_to_resource(dn, 0, &irq_res);
-	if (ret == NO_IRQ)
+	if (!ret)
 		irq_res.start = irq_res.end = 0;
 	else
 		irq_res.flags = 0;
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 447d9c0..95ec435 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -104,7 +104,7 @@
 };
 
 MODULE_AUTHOR("Uwe Koziolek");
-MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
+MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/base/base.h b/drivers/base/base.h
index a34dca0..21c1b96 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -1,3 +1,4 @@
+#include <linux/notifier.h>
 
 /**
  * struct subsys_private - structure to hold the private to the driver core portions of the bus_type/class structure.
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 82c86545..d8b3d89 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
 #include <linux/kallsyms.h>
 #include <linux/mutex.h>
 #include <linux/async.h>
+#include <linux/pm_runtime.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -1742,6 +1743,8 @@
 		 */
 		list_del_init(&dev->kobj.entry);
 		spin_unlock(&devices_kset->list_lock);
+		/* Disable all device's runtime power management */
+		pm_runtime_disable(dev);
 
 		if (dev->bus && dev->bus->shutdown) {
 			dev_dbg(dev, "shutdown\n");
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index f369e27..bb0025c 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -4,6 +4,7 @@
  */
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 
 struct dma_coherent_mem {
diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index 763d59c..6f3676f 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 
 /*
diff --git a/drivers/base/hypervisor.c b/drivers/base/hypervisor.c
index 6428cba..4f8b741 100644
--- a/drivers/base/hypervisor.c
+++ b/drivers/base/hypervisor.c
@@ -10,6 +10,7 @@
 
 #include <linux/kobject.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include "base.h"
 
 struct kobject *hypervisor_kobj;
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 793f796..5693ece 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -127,12 +127,13 @@
 		       nid, K(node_page_state(nid, NR_WRITEBACK)),
 		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
 		       nid, K(node_page_state(nid, NR_FILE_MAPPED)),
-		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 			+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR
+			HPAGE_PMD_NR),
+#else
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)),
 #endif
-		       ),
 		       nid, K(node_page_state(nid, NR_SHMEM)),
 		       nid, node_page_state(nid, NR_KERNEL_STACK) *
 				THREAD_SIZE / 1024,
@@ -143,13 +144,14 @@
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
 				node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
-		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 			, nid,
 			K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR)
+			HPAGE_PMD_NR));
+#else
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
 #endif
-		       );
 	n += hugetlb_report_node_meminfo(nid, buf + n);
 	return n;
 }
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 5f0f85d..428e55e 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -229,7 +229,8 @@
 
 	list_for_each_entry_reverse(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			clk_disable(ce->clk);
+			if (ce->status == PCE_STATUS_ENABLED)
+				clk_disable(ce->clk);
 			ce->status = PCE_STATUS_ACQUIRED;
 		}
 	}
diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c
index 29820c3..4af7c1c 100644
--- a/drivers/base/power/common.c
+++ b/drivers/base/power/common.c
@@ -8,7 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/pm_clock.h>
 
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 9508df7..265a0ee 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -8,6 +8,7 @@
 
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/export.h>
 
 #ifdef CONFIG_PM_RUNTIME
 /**
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 59f8ab2..c3d2dfc 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -19,6 +19,7 @@
 
 #include <linux/device.h>
 #include <linux/kallsyms.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -919,7 +920,8 @@
  End:
 	if (!error) {
 		dev->power.is_suspended = true;
-		if (dev->power.wakeup_path && dev->parent)
+		if (dev->power.wakeup_path
+		    && dev->parent && !dev->parent->power.ignore_children)
 			dev->parent->power.wakeup_path = true;
 	}
 
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 434a6c0..95706fa 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -669,7 +669,7 @@
 	struct device_opp *dev_opp = find_device_opp(dev);
 
 	if (IS_ERR(dev_opp))
-		return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */
+		return ERR_CAST(dev_opp); /* matching type */
 
 	return &dev_opp->head;
 }
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 91e0614..86de6c5 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 
 
 static DEFINE_MUTEX(dev_pm_qos_mtx);
@@ -211,11 +212,9 @@
 	if (!dev || !req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_add_request() called for already "
-			"added request\n");
+	if (WARN(dev_pm_qos_request_active(req),
+		 "%s() called for already added request\n", __func__))
 		return -EINVAL;
-	}
 
 	req->dev = dev;
 
@@ -270,11 +269,9 @@
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (!dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_update_request() called for "
-			"unknown object\n");
+	if (WARN(!dev_pm_qos_request_active(req),
+		 "%s() called for unknown object\n", __func__))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev_pm_qos_mtx);
 
@@ -311,11 +308,9 @@
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (!dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_remove_request() called for "
-			"unknown object\n");
+	if (WARN(!dev_pm_qos_request_active(req),
+		 "%s() called for unknown object\n", __func__))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev_pm_qos_mtx);
 
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 6bb3aaf..8c78443 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/export.h>
 #include <linux/pm_runtime.h>
 #include <trace/events/rpm.h>
 #include "power.h"
@@ -29,13 +30,10 @@
 void update_pm_runtime_accounting(struct device *dev)
 {
 	unsigned long now = jiffies;
-	int delta;
+	unsigned long delta;
 
 	delta = now - dev->power.accounting_timestamp;
 
-	if (delta < 0)
-		delta = 0;
-
 	dev->power.accounting_timestamp = now;
 
 	if (dev->power.disable_depth > 0)
@@ -296,6 +294,9 @@
  * the callback was running then carry it out, otherwise send an idle
  * notification for its parent (if the suspend succeeded and both
  * ignore_children of parent->power and irq_safe of dev->power are not set).
+ * If ->runtime_suspend failed with -EAGAIN or -EBUSY, and if the RPM_AUTO
+ * flag is set and the next autosuspend-delay expiration time is in the
+ * future, schedule another autosuspend attempt.
  *
  * This function must be called under dev->power.lock with interrupts disabled.
  */
@@ -416,10 +417,21 @@
 	if (retval) {
 		__update_runtime_status(dev, RPM_ACTIVE);
 		dev->power.deferred_resume = false;
-		if (retval == -EAGAIN || retval == -EBUSY)
+		if (retval == -EAGAIN || retval == -EBUSY) {
 			dev->power.runtime_error = 0;
-		else
+
+			/*
+			 * If the callback routine failed an autosuspend, and
+			 * if the last_busy time has been updated so that there
+			 * is a new autosuspend expiration time, automatically
+			 * reschedule another autosuspend.
+			 */
+			if ((rpmflags & RPM_AUTO) &&
+			    pm_runtime_autosuspend_expiration(dev) != 0)
+				goto repeat;
+		} else {
 			pm_runtime_cancel_pending(dev);
+		}
 		wake_up_all(&dev->power.wait_queue);
 		goto out;
 	}
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 17b7934..adf41be0 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -4,6 +4,7 @@
 
 #include <linux/device.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/pm_runtime.h>
 #include <linux/atomic.h>
 #include <linux/jiffies.h>
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index af10abe..d94a1f51 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/resume-trace.h>
+#include <linux/export.h>
 #include <linux/rtc.h>
 
 #include <asm/rtc.h>
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 14ee07e..caf995f 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -10,6 +10,7 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/capability.h>
+#include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index afcfef8..666f6f5 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <trace/events/regmap.h>
 #include <linux/bsearch.h>
 #include <linux/sort.h>
diff --git a/drivers/base/transport_class.c b/drivers/base/transport_class.c
index 84997ef..f6c453c 100644
--- a/drivers/base/transport_class.c
+++ b/drivers/base/transport_class.c
@@ -27,6 +27,7 @@
  * transport class is framed entirely in terms of generic devices to
  * allow it to be used by any physical HBA in the system.
  */
+#include <linux/export.h>
 #include <linux/attribute_container.h>
 #include <linux/transport_class.h>
 
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
index 189a97b..893f6e0 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -6,6 +6,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
 bool bcma_core_is_enabled(struct bcma_device *core)
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index 47cce9d..e9f1b3f 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -9,6 +9,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
 static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index 2968d80..800163c 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -9,6 +9,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
 static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index 81f3d0a..4fde625 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -9,6 +9,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/export.h>
 #include <linux/bcma/bcma.h>
 
 /**************************************************
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index ac4bc62..1b51d8b 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/bcma/bcma.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 static void bcma_host_pci_switch_core(struct bcma_device *core)
 {
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 8c09c3e..70c84b9 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -6,6 +6,7 @@
  */
 
 #include "bcma_private.h"
+#include <linux/module.h>
 #include <linux/bcma/bcma.h>
 #include <linux/slab.h>
 
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 528f631..321de7b 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -15,6 +15,7 @@
 #include <linux/genhd.h>
 #include <linux/netdevice.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 #include "aoe.h"
 
 static DEFINE_MUTEX(aoeblk_mutex);
@@ -159,7 +160,7 @@
 	return 0;
 }
 
-static int
+static void
 aoeblk_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct sk_buff_head queue;
@@ -172,25 +173,25 @@
 	if (bio == NULL) {
 		printk(KERN_ERR "aoe: bio is NULL\n");
 		BUG();
-		return 0;
+		return;
 	}
 	d = bio->bi_bdev->bd_disk->private_data;
 	if (d == NULL) {
 		printk(KERN_ERR "aoe: bd_disk->private_data is NULL\n");
 		BUG();
 		bio_endio(bio, -ENXIO);
-		return 0;
+		return;
 	} else if (bio->bi_io_vec == NULL) {
 		printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
 		BUG();
 		bio_endio(bio, -ENXIO);
-		return 0;
+		return;
 	}
 	buf = mempool_alloc(d->bufpool, GFP_NOIO);
 	if (buf == NULL) {
 		printk(KERN_INFO "aoe: buf allocation failure\n");
 		bio_endio(bio, -ENOMEM);
-		return 0;
+		return;
 	}
 	memset(buf, 0, sizeof(*buf));
 	INIT_LIST_HEAD(&buf->bufs);
@@ -211,7 +212,7 @@
 		spin_unlock_irqrestore(&d->lock, flags);
 		mempool_free(buf, d->bufpool);
 		bio_endio(bio, -ENXIO);
-		return 0;
+		return;
 	}
 
 	list_add_tail(&buf->bufs, &d->bufq);
@@ -222,8 +223,6 @@
 
 	spin_unlock_irqrestore(&d->lock, flags);
 	aoenet_xmit(&queue);
-
-	return 0;
 }
 
 static int
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 146296c..5f8e39c 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/skbuff.h>
+#include <linux/export.h>
 #include "aoe.h"
 
 enum {
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index dba1c32..d22119d 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -323,7 +323,7 @@
 	return err;
 }
 
-static int brd_make_request(struct request_queue *q, struct bio *bio)
+static void brd_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct block_device *bdev = bio->bi_bdev;
 	struct brd_device *brd = bdev->bd_disk->private_data;
@@ -359,8 +359,6 @@
 
 out:
 	bio_endio(bio, err);
-
-	return 0;
 }
 
 #ifdef CONFIG_BLK_DEV_XIP
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 8f4ef65..8004ac3 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -68,6 +69,10 @@
 module_param(cciss_tape_cmds, int, 0644);
 MODULE_PARM_DESC(cciss_tape_cmds,
 	"number of commands to allocate for tape devices (default: 6)");
+static int cciss_simple_mode;
+module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_simple_mode,
+	"Use 'simple mode' rather than 'performant mode'");
 
 static DEFINE_MUTEX(cciss_mutex);
 static struct proc_dir_entry *proc_cciss;
@@ -176,6 +181,7 @@
 			unsigned int block_size, InquiryData_struct *inq_buff,
 				   drive_info_struct *drv);
 static void __devinit cciss_interrupt_mode(ctlr_info_t *);
+static int __devinit cciss_enter_simple_mode(struct ctlr_info *h);
 static void start_io(ctlr_info_t *h);
 static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
 			__u8 page_code, unsigned char scsi3addr[],
@@ -388,7 +394,7 @@
 		h->product_name,
 		(unsigned long)h->board_id,
 		h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
-		h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT],
+		h->firm_ver[3], (unsigned int)h->intr[h->intr_mode],
 		h->num_luns,
 		h->Qdepth, h->commands_outstanding,
 		h->maxQsinceinit, h->max_outstanding, h->maxSG);
@@ -636,6 +642,18 @@
 }
 static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 
+static ssize_t host_show_transport_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct ctlr_info *h = to_hba(dev);
+
+	return snprintf(buf, 20, "%s\n",
+		h->transMethod & CFGTBL_Trans_Performant ?
+			"performant" : "simple");
+}
+static DEVICE_ATTR(transport_mode, S_IRUGO, host_show_transport_mode, NULL);
+
 static ssize_t dev_show_unique_id(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
@@ -808,6 +826,7 @@
 static struct attribute *cciss_host_attrs[] = {
 	&dev_attr_rescan.attr,
 	&dev_attr_resettable.attr,
+	&dev_attr_transport_mode.attr,
 	NULL
 };
 
@@ -3984,6 +4003,9 @@
 {
 	__u32 trans_support;
 
+	if (cciss_simple_mode)
+		return;
+
 	dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
 	/* Attempt to put controller into performant mode if supported */
 	/* Does board support performant mode? */
@@ -4081,7 +4103,7 @@
 default_int_mode:
 #endif				/* CONFIG_PCI_MSI */
 	/* if we get here we're going to use the default interrupt mode */
-	h->intr[PERF_MODE_INT] = h->pdev->irq;
+	h->intr[h->intr_mode] = h->pdev->irq;
 	return;
 }
 
@@ -4298,6 +4320,10 @@
 		dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
 		return -ENODEV;
 	}
+
+	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+				PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
 	err = pci_enable_device(h->pdev);
 	if (err) {
 		dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
@@ -4341,6 +4367,9 @@
 	}
 	cciss_enable_scsi_prefetch(h);
 	cciss_p600_dma_prefetch_quirk(h);
+	err = cciss_enter_simple_mode(h);
+	if (err)
+		goto err_out_free_res;
 	cciss_put_controller_into_performant_mode(h);
 	return 0;
 
@@ -4533,6 +4562,13 @@
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= PCI_D0;
 		pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+		/*
+		 * The P600 requires a small delay when changing states.
+		 * Otherwise we may think the board did not reset and we bail.
+		 * This for kdump only and is particular to the P600.
+		 */
+		msleep(500);
 	}
 	return 0;
 }
@@ -4843,20 +4879,20 @@
 	irqreturn_t (*intxhandler)(int, void *))
 {
 	if (h->msix_vector || h->msi_vector) {
-		if (!request_irq(h->intr[PERF_MODE_INT], msixhandler,
+		if (!request_irq(h->intr[h->intr_mode], msixhandler,
 				IRQF_DISABLED, h->devname, h))
 			return 0;
 		dev_err(&h->pdev->dev, "Unable to get msi irq %d"
-			" for %s\n", h->intr[PERF_MODE_INT],
+			" for %s\n", h->intr[h->intr_mode],
 			h->devname);
 		return -1;
 	}
 
-	if (!request_irq(h->intr[PERF_MODE_INT], intxhandler,
+	if (!request_irq(h->intr[h->intr_mode], intxhandler,
 			IRQF_DISABLED, h->devname, h))
 		return 0;
 	dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
-		h->intr[PERF_MODE_INT], h->devname);
+		h->intr[h->intr_mode], h->devname);
 	return -1;
 }
 
@@ -4887,7 +4923,7 @@
 {
 	int ctlr = h->ctlr;
 
-	free_irq(h->intr[PERF_MODE_INT], h);
+	free_irq(h->intr[h->intr_mode], h);
 #ifdef CONFIG_PCI_MSI
 	if (h->msix_vector)
 		pci_disable_msix(h->pdev);
@@ -4953,6 +4989,7 @@
 	h = hba[i];
 	h->pdev = pdev;
 	h->busy_initializing = 1;
+	h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
 	INIT_LIST_HEAD(&h->cmpQ);
 	INIT_LIST_HEAD(&h->reqQ);
 	mutex_init(&h->busy_shutting_down);
@@ -5009,7 +5046,7 @@
 
 	dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
 	       h->devname, pdev->device, pci_name(pdev),
-	       h->intr[PERF_MODE_INT], dac ? "" : " not");
+	       h->intr[h->intr_mode], dac ? "" : " not");
 
 	if (cciss_allocate_cmd_pool(h))
 		goto clean4;
@@ -5056,7 +5093,7 @@
 		spin_lock_irqsave(&h->lock, flags);
 		h->access.set_intr_mask(h, CCISS_INTR_OFF);
 		spin_unlock_irqrestore(&h->lock, flags);
-		free_irq(h->intr[PERF_MODE_INT], h);
+		free_irq(h->intr[h->intr_mode], h);
 		rc = cciss_request_irq(h, cciss_msix_discard_completions,
 					cciss_intx_discard_completions);
 		if (rc) {
@@ -5126,6 +5163,7 @@
 	h->cciss_max_sectors = 8192;
 
 	rebuild_lun_table(h, 1, 0);
+	cciss_engage_scsi(h);
 	h->busy_initializing = 0;
 	return 1;
 
@@ -5133,7 +5171,7 @@
 	cciss_free_cmd_pool(h);
 	cciss_free_scatterlists(h);
 	cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
-	free_irq(h->intr[PERF_MODE_INT], h);
+	free_irq(h->intr[h->intr_mode], h);
 clean2:
 	unregister_blkdev(h->major, h->devname);
 clean1:
@@ -5172,9 +5210,31 @@
 	if (return_code != IO_OK)
 		dev_warn(&h->pdev->dev, "Error flushing cache\n");
 	h->access.set_intr_mask(h, CCISS_INTR_OFF);
-	free_irq(h->intr[PERF_MODE_INT], h);
+	free_irq(h->intr[h->intr_mode], h);
 }
 
+static int __devinit cciss_enter_simple_mode(struct ctlr_info *h)
+{
+	u32 trans_support;
+
+	trans_support = readl(&(h->cfgtable->TransportSupport));
+	if (!(trans_support & SIMPLE_MODE))
+		return -ENOTSUPP;
+
+	h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+	writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
+	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+	cciss_wait_for_mode_change_ack(h);
+	print_cfg_table(h);
+	if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
+		dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
+		return -ENODEV;
+	}
+	h->transMethod = CFGTBL_Trans_Simple;
+	return 0;
+}
+
+
 static void __devexit cciss_remove_one(struct pci_dev *pdev)
 {
 	ctlr_info_t *h;
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c049548..7fda30e 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -92,6 +92,7 @@
 	unsigned int intr[4];
 	unsigned int msix_vector;
 	unsigned int msi_vector;
+	int	intr_mode;
 	int 	cciss_max_sectors;
 	BYTE	cciss_read;
 	BYTE	cciss_write;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 951a4e3..e820b68 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1720,5 +1720,6 @@
 /* If no tape support, then these become defined out of existence */
 
 #define cciss_scsi_setup(cntl_num)
+#define cciss_engage_scsi(h)
 
 #endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index b2fceb5..9125bbe 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -620,6 +620,7 @@
 	}
 	vendor_id = pdev->vendor;
 	device_id = pdev->device;
+	revision  = pdev->revision;
 	irq = pdev->irq;
 
 	for(i=0; i<6; i++)
@@ -632,7 +633,6 @@
 	}
 
 	pci_read_config_word(pdev, PCI_COMMAND, &command);
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
 	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line_size);
 	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_timer);
 
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 1706d60..9cf2035 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1506,7 +1506,7 @@
 extern int proc_details;
 
 /* drbd_req */
-extern int drbd_make_request(struct request_queue *q, struct bio *bio);
+extern void drbd_make_request(struct request_queue *q, struct bio *bio);
 extern int drbd_read_remote(struct drbd_conf *mdev, struct drbd_request *req);
 extern int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct bio_vec *bvec);
 extern int is_valid_ar_handle(struct drbd_request *, sector_t);
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 3424d67..4a0f314 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -1073,7 +1073,7 @@
 	return 0;
 }
 
-int drbd_make_request(struct request_queue *q, struct bio *bio)
+void drbd_make_request(struct request_queue *q, struct bio *bio)
 {
 	unsigned int s_enr, e_enr;
 	struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata;
@@ -1081,7 +1081,7 @@
 
 	if (drbd_fail_request_early(mdev, bio_data_dir(bio) & WRITE)) {
 		bio_endio(bio, -EPERM);
-		return 0;
+		return;
 	}
 
 	start_time = jiffies;
@@ -1100,7 +1100,8 @@
 
 	if (likely(s_enr == e_enr)) {
 		inc_ap_bio(mdev, 1);
-		return drbd_make_request_common(mdev, bio, start_time);
+		drbd_make_request_common(mdev, bio, start_time);
+		return;
 	}
 
 	/* can this bio be split generically?
@@ -1148,7 +1149,6 @@
 
 		bio_pair_release(bp);
 	}
-	return 0;
 }
 
 /* This is called by bio_add_page().  With this function we reduce
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 4720c7a..68b205a 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -76,6 +76,8 @@
 #include <linux/splice.h>
 #include <linux/sysfs.h>
 #include <linux/miscdevice.h>
+#include <linux/falloc.h>
+
 #include <asm/uaccess.h>
 
 static DEFINE_IDR(loop_index_idr);
@@ -159,17 +161,19 @@
 	&xor_funcs
 };
 
-static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
 {
-	loff_t size, offset, loopsize;
+	loff_t size, loopsize;
 
 	/* Compute loopsize in bytes */
 	size = i_size_read(file->f_mapping->host);
-	offset = lo->lo_offset;
 	loopsize = size - offset;
-	if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize)
-		loopsize = lo->lo_sizelimit;
+	/* offset is beyond i_size, wierd but possible */
+	if (loopsize < 0)
+		return 0;
 
+	if (sizelimit > 0 && sizelimit < loopsize)
+		loopsize = sizelimit;
 	/*
 	 * Unfortunately, if we want to do I/O on the device,
 	 * the number of 512-byte sectors has to fit into a sector_t.
@@ -177,17 +181,25 @@
 	return loopsize >> 9;
 }
 
-static int
-figure_loop_size(struct loop_device *lo)
+static loff_t get_loop_size(struct loop_device *lo, struct file *file)
 {
-	loff_t size = get_loop_size(lo, lo->lo_backing_file);
+	return get_size(lo->lo_offset, lo->lo_sizelimit, file);
+}
+
+static int
+figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
+{
+	loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
 	sector_t x = (sector_t)size;
 
 	if (unlikely((loff_t)x != size))
 		return -EFBIG;
-
+	if (lo->lo_offset != offset)
+		lo->lo_offset = offset;
+	if (lo->lo_sizelimit != sizelimit)
+		lo->lo_sizelimit = sizelimit;
 	set_capacity(lo->lo_disk, x);
-	return 0;					
+	return 0;
 }
 
 static inline int
@@ -203,74 +215,6 @@
 }
 
 /**
- * do_lo_send_aops - helper for writing data to a loop device
- *
- * This is the fast version for backing filesystems which implement the address
- * space operations write_begin and write_end.
- */
-static int do_lo_send_aops(struct loop_device *lo, struct bio_vec *bvec,
-		loff_t pos, struct page *unused)
-{
-	struct file *file = lo->lo_backing_file; /* kudos to NFsckingS */
-	struct address_space *mapping = file->f_mapping;
-	pgoff_t index;
-	unsigned offset, bv_offs;
-	int len, ret;
-
-	mutex_lock(&mapping->host->i_mutex);
-	index = pos >> PAGE_CACHE_SHIFT;
-	offset = pos & ((pgoff_t)PAGE_CACHE_SIZE - 1);
-	bv_offs = bvec->bv_offset;
-	len = bvec->bv_len;
-	while (len > 0) {
-		sector_t IV;
-		unsigned size, copied;
-		int transfer_result;
-		struct page *page;
-		void *fsdata;
-
-		IV = ((sector_t)index << (PAGE_CACHE_SHIFT - 9))+(offset >> 9);
-		size = PAGE_CACHE_SIZE - offset;
-		if (size > len)
-			size = len;
-
-		ret = pagecache_write_begin(file, mapping, pos, size, 0,
-							&page, &fsdata);
-		if (ret)
-			goto fail;
-
-		file_update_time(file);
-
-		transfer_result = lo_do_transfer(lo, WRITE, page, offset,
-				bvec->bv_page, bv_offs, size, IV);
-		copied = size;
-		if (unlikely(transfer_result))
-			copied = 0;
-
-		ret = pagecache_write_end(file, mapping, pos, size, copied,
-							page, fsdata);
-		if (ret < 0 || ret != copied)
-			goto fail;
-
-		if (unlikely(transfer_result))
-			goto fail;
-
-		bv_offs += copied;
-		len -= copied;
-		offset = 0;
-		index++;
-		pos += copied;
-	}
-	ret = 0;
-out:
-	mutex_unlock(&mapping->host->i_mutex);
-	return ret;
-fail:
-	ret = -1;
-	goto out;
-}
-
-/**
  * __do_lo_send_write - helper for writing data to a loop device
  *
  * This helper just factors out common code between do_lo_send_direct_write()
@@ -297,10 +241,8 @@
 /**
  * do_lo_send_direct_write - helper for writing data to a loop device
  *
- * This is the fast, non-transforming version for backing filesystems which do
- * not implement the address space operations write_begin and write_end.
- * It uses the write file operation which should be present on all writeable
- * filesystems.
+ * This is the fast, non-transforming version that does not need double
+ * buffering.
  */
 static int do_lo_send_direct_write(struct loop_device *lo,
 		struct bio_vec *bvec, loff_t pos, struct page *page)
@@ -316,15 +258,9 @@
 /**
  * do_lo_send_write - helper for writing data to a loop device
  *
- * This is the slow, transforming version for filesystems which do not
- * implement the address space operations write_begin and write_end.  It
- * uses the write file operation which should be present on all writeable
- * filesystems.
- *
- * Using fops->write is slower than using aops->{prepare,commit}_write in the
- * transforming case because we need to double buffer the data as we cannot do
- * the transformations in place as we do not have direct access to the
- * destination pages of the backing file.
+ * This is the slow, transforming version that needs to double buffer the
+ * data as it cannot do the transformations in place without having direct
+ * access to the destination pages of the backing file.
  */
 static int do_lo_send_write(struct loop_device *lo, struct bio_vec *bvec,
 		loff_t pos, struct page *page)
@@ -350,17 +286,16 @@
 	struct page *page = NULL;
 	int i, ret = 0;
 
-	do_lo_send = do_lo_send_aops;
-	if (!(lo->lo_flags & LO_FLAGS_USE_AOPS)) {
+	if (lo->transfer != transfer_none) {
+		page = alloc_page(GFP_NOIO | __GFP_HIGHMEM);
+		if (unlikely(!page))
+			goto fail;
+		kmap(page);
+		do_lo_send = do_lo_send_write;
+	} else {
 		do_lo_send = do_lo_send_direct_write;
-		if (lo->transfer != transfer_none) {
-			page = alloc_page(GFP_NOIO | __GFP_HIGHMEM);
-			if (unlikely(!page))
-				goto fail;
-			kmap(page);
-			do_lo_send = do_lo_send_write;
-		}
 	}
+
 	bio_for_each_segment(bvec, bio, i) {
 		ret = do_lo_send(lo, bvec, pos, page);
 		if (ret < 0)
@@ -447,7 +382,8 @@
 
 	if (retval < 0)
 		return retval;
-
+	if (retval != bvec->bv_len)
+		return -EIO;
 	return 0;
 }
 
@@ -484,6 +420,29 @@
 			}
 		}
 
+		/*
+		 * We use punch hole to reclaim the free space used by the
+		 * image a.k.a. discard. However we do support discard if
+		 * encryption is enabled, because it may give an attacker
+		 * useful information.
+		 */
+		if (bio->bi_rw & REQ_DISCARD) {
+			struct file *file = lo->lo_backing_file;
+			int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE;
+
+			if ((!file->f_op->fallocate) ||
+			    lo->lo_encrypt_key_size) {
+				ret = -EOPNOTSUPP;
+				goto out;
+			}
+			ret = file->f_op->fallocate(file, mode, pos,
+						    bio->bi_size);
+			if (unlikely(ret && ret != -EINVAL &&
+				     ret != -EOPNOTSUPP))
+				ret = -EIO;
+			goto out;
+		}
+
 		ret = lo_send(lo, bio, pos);
 
 		if ((bio->bi_rw & REQ_FUA) && !ret) {
@@ -514,7 +473,7 @@
 	return bio_list_pop(&lo->lo_bio_list);
 }
 
-static int loop_make_request(struct request_queue *q, struct bio *old_bio)
+static void loop_make_request(struct request_queue *q, struct bio *old_bio)
 {
 	struct loop_device *lo = q->queuedata;
 	int rw = bio_rw(old_bio);
@@ -532,12 +491,11 @@
 	loop_add_bio(lo, old_bio);
 	wake_up(&lo->lo_event);
 	spin_unlock_irq(&lo->lo_lock);
-	return 0;
+	return;
 
 out:
 	spin_unlock_irq(&lo->lo_lock);
 	bio_io_error(old_bio);
-	return 0;
 }
 
 struct switch_request {
@@ -700,7 +658,7 @@
 		goto out_putf;
 
 	fput(old_file);
-	if (max_part > 0)
+	if (lo->lo_flags & LO_FLAGS_PARTSCAN)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
 	return 0;
 
@@ -777,16 +735,25 @@
 	return sprintf(buf, "%s\n", autoclear ? "1" : "0");
 }
 
+static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
+{
+	int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
+
+	return sprintf(buf, "%s\n", partscan ? "1" : "0");
+}
+
 LOOP_ATTR_RO(backing_file);
 LOOP_ATTR_RO(offset);
 LOOP_ATTR_RO(sizelimit);
 LOOP_ATTR_RO(autoclear);
+LOOP_ATTR_RO(partscan);
 
 static struct attribute *loop_attrs[] = {
 	&loop_attr_backing_file.attr,
 	&loop_attr_offset.attr,
 	&loop_attr_sizelimit.attr,
 	&loop_attr_autoclear.attr,
+	&loop_attr_partscan.attr,
 	NULL,
 };
 
@@ -807,6 +774,35 @@
 			   &loop_attribute_group);
 }
 
+static void loop_config_discard(struct loop_device *lo)
+{
+	struct file *file = lo->lo_backing_file;
+	struct inode *inode = file->f_mapping->host;
+	struct request_queue *q = lo->lo_queue;
+
+	/*
+	 * We use punch hole to reclaim the free space used by the
+	 * image a.k.a. discard. However we do support discard if
+	 * encryption is enabled, because it may give an attacker
+	 * useful information.
+	 */
+	if ((!file->f_op->fallocate) ||
+	    lo->lo_encrypt_key_size) {
+		q->limits.discard_granularity = 0;
+		q->limits.discard_alignment = 0;
+		q->limits.max_discard_sectors = 0;
+		q->limits.discard_zeroes_data = 0;
+		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
+		return;
+	}
+
+	q->limits.discard_granularity = inode->i_sb->s_blocksize;
+	q->limits.discard_alignment = inode->i_sb->s_blocksize;
+	q->limits.max_discard_sectors = UINT_MAX >> 9;
+	q->limits.discard_zeroes_data = 1;
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
+}
+
 static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 		       struct block_device *bdev, unsigned int arg)
 {
@@ -849,36 +845,24 @@
 	mapping = file->f_mapping;
 	inode = mapping->host;
 
-	if (!(file->f_mode & FMODE_WRITE))
-		lo_flags |= LO_FLAGS_READ_ONLY;
-
 	error = -EINVAL;
-	if (S_ISREG(inode->i_mode) || S_ISBLK(inode->i_mode)) {
-		const struct address_space_operations *aops = mapping->a_ops;
-
-		if (aops->write_begin)
-			lo_flags |= LO_FLAGS_USE_AOPS;
-		if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
-			lo_flags |= LO_FLAGS_READ_ONLY;
-
-		lo_blocksize = S_ISBLK(inode->i_mode) ?
-			inode->i_bdev->bd_block_size : PAGE_SIZE;
-
-		error = 0;
-	} else {
+	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
 		goto out_putf;
-	}
 
-	size = get_loop_size(lo, file);
-
-	if ((loff_t)(sector_t)size != size) {
-		error = -EFBIG;
-		goto out_putf;
-	}
-
-	if (!(mode & FMODE_WRITE))
+	if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) ||
+	    !file->f_op->write)
 		lo_flags |= LO_FLAGS_READ_ONLY;
 
+	lo_blocksize = S_ISBLK(inode->i_mode) ?
+		inode->i_bdev->bd_block_size : PAGE_SIZE;
+
+	error = -EFBIG;
+	size = get_loop_size(lo, file);
+	if ((loff_t)(sector_t)size != size)
+		goto out_putf;
+
+	error = 0;
+
 	set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0);
 
 	lo->lo_blocksize = lo_blocksize;
@@ -919,7 +903,9 @@
 	}
 	lo->lo_state = Lo_bound;
 	wake_up_process(lo->lo_thread);
-	if (max_part > 0)
+	if (part_shift)
+		lo->lo_flags |= LO_FLAGS_PARTSCAN;
+	if (lo->lo_flags & LO_FLAGS_PARTSCAN)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
 	return 0;
 
@@ -980,10 +966,11 @@
 	return err;
 }
 
-static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
+static int loop_clr_fd(struct loop_device *lo)
 {
 	struct file *filp = lo->lo_backing_file;
 	gfp_t gfp = lo->old_gfp_mask;
+	struct block_device *bdev = lo->lo_device;
 
 	if (lo->lo_state != Lo_bound)
 		return -ENXIO;
@@ -1012,7 +999,6 @@
 	lo->lo_offset = 0;
 	lo->lo_sizelimit = 0;
 	lo->lo_encrypt_key_size = 0;
-	lo->lo_flags = 0;
 	lo->lo_thread = NULL;
 	memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
 	memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
@@ -1030,8 +1016,11 @@
 	lo->lo_state = Lo_unbound;
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
-	if (max_part > 0 && bdev)
+	if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
+	lo->lo_flags = 0;
+	if (!part_shift)
+		lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
 	mutex_unlock(&lo->lo_ctl_mutex);
 	/*
 	 * Need not hold lo_ctl_mutex to fput backing file.
@@ -1080,11 +1069,10 @@
 
 	if (lo->lo_offset != info->lo_offset ||
 	    lo->lo_sizelimit != info->lo_sizelimit) {
-		lo->lo_offset = info->lo_offset;
-		lo->lo_sizelimit = info->lo_sizelimit;
-		if (figure_loop_size(lo))
+		if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit))
 			return -EFBIG;
 	}
+	loop_config_discard(lo);
 
 	memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE);
 	memcpy(lo->lo_crypt_name, info->lo_crypt_name, LO_NAME_SIZE);
@@ -1100,6 +1088,13 @@
 	     (info->lo_flags & LO_FLAGS_AUTOCLEAR))
 		lo->lo_flags ^= LO_FLAGS_AUTOCLEAR;
 
+	if ((info->lo_flags & LO_FLAGS_PARTSCAN) &&
+	     !(lo->lo_flags & LO_FLAGS_PARTSCAN)) {
+		lo->lo_flags |= LO_FLAGS_PARTSCAN;
+		lo->lo_disk->flags &= ~GENHD_FL_NO_PART_SCAN;
+		ioctl_by_bdev(lo->lo_device, BLKRRPART, 0);
+	}
+
 	lo->lo_encrypt_key_size = info->lo_encrypt_key_size;
 	lo->lo_init[0] = info->lo_init[0];
 	lo->lo_init[1] = info->lo_init[1];
@@ -1260,7 +1255,7 @@
 	err = -ENXIO;
 	if (unlikely(lo->lo_state != Lo_bound))
 		goto out;
-	err = figure_loop_size(lo);
+	err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
 	if (unlikely(err))
 		goto out;
 	sec = get_capacity(lo->lo_disk);
@@ -1293,18 +1288,24 @@
 		break;
 	case LOOP_CLR_FD:
 		/* loop_clr_fd would have unlocked lo_ctl_mutex on success */
-		err = loop_clr_fd(lo, bdev);
+		err = loop_clr_fd(lo);
 		if (!err)
 			goto out_unlocked;
 		break;
 	case LOOP_SET_STATUS:
-		err = loop_set_status_old(lo, (struct loop_info __user *) arg);
+		err = -EPERM;
+		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+			err = loop_set_status_old(lo,
+					(struct loop_info __user *)arg);
 		break;
 	case LOOP_GET_STATUS:
 		err = loop_get_status_old(lo, (struct loop_info __user *) arg);
 		break;
 	case LOOP_SET_STATUS64:
-		err = loop_set_status64(lo, (struct loop_info64 __user *) arg);
+		err = -EPERM;
+		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+			err = loop_set_status64(lo,
+					(struct loop_info64 __user *) arg);
 		break;
 	case LOOP_GET_STATUS64:
 		err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
@@ -1513,7 +1514,7 @@
 		 * In autoclear mode, stop the loop thread
 		 * and remove configuration after last close.
 		 */
-		err = loop_clr_fd(lo, NULL);
+		err = loop_clr_fd(lo);
 		if (!err)
 			goto out_unlocked;
 	} else {
@@ -1635,6 +1636,27 @@
 	if (!disk)
 		goto out_free_queue;
 
+	/*
+	 * Disable partition scanning by default. The in-kernel partition
+	 * scanning can be requested individually per-device during its
+	 * setup. Userspace can always add and remove partitions from all
+	 * devices. The needed partition minors are allocated from the
+	 * extended minor space, the main loop device numbers will continue
+	 * to match the loop minors, regardless of the number of partitions
+	 * used.
+	 *
+	 * If max_part is given, partition scanning is globally enabled for
+	 * all loop devices. The minors for the main loop devices will be
+	 * multiples of max_part.
+	 *
+	 * Note: Global-for-all-devices, set-only-at-init, read-only module
+	 * parameteters like 'max_loop' and 'max_part' make things needlessly
+	 * complicated, are too static, inflexible and may surprise
+	 * userspace tools. Parameters like this in general should be avoided.
+	 */
+	if (!part_shift)
+		disk->flags |= GENHD_FL_NO_PART_SCAN;
+	disk->flags |= GENHD_FL_EXT_DEVT;
 	mutex_init(&lo->lo_ctl_mutex);
 	lo->lo_number		= i;
 	lo->lo_thread		= NULL;
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index f533f33..c3f0ee1 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -127,8 +127,7 @@
 	if (lock)
 		mutex_lock(&lo->tx_lock);
 	if (lo->sock) {
-		printk(KERN_WARNING "%s: shutting down socket\n",
-			lo->disk->disk_name);
+		dev_warn(disk_to_dev(lo->disk), "shutting down socket\n");
 		kernel_sock_shutdown(lo->sock, SHUT_RDWR);
 		lo->sock = NULL;
 	}
@@ -158,8 +157,9 @@
 	sigset_t blocked, oldset;
 
 	if (unlikely(!sock)) {
-		printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
-		       lo->disk->disk_name, (send ? "send" : "recv"));
+		dev_err(disk_to_dev(lo->disk),
+			"Attempted %s on closed socket in sock_xmit\n",
+			(send ? "send" : "recv"));
 		return -EINVAL;
 	}
 
@@ -250,8 +250,8 @@
 	result = sock_xmit(lo, 1, &request, sizeof(request),
 			(nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0);
 	if (result <= 0) {
-		printk(KERN_ERR "%s: Send control failed (result %d)\n",
-				lo->disk->disk_name, result);
+		dev_err(disk_to_dev(lo->disk),
+			"Send control failed (result %d)\n", result);
 		goto error_out;
 	}
 
@@ -270,8 +270,9 @@
 					lo->disk->disk_name, req, bvec->bv_len);
 			result = sock_send_bvec(lo, bvec, flags);
 			if (result <= 0) {
-				printk(KERN_ERR "%s: Send data failed (result %d)\n",
-						lo->disk->disk_name, result);
+				dev_err(disk_to_dev(lo->disk),
+					"Send data failed (result %d)\n",
+					result);
 				goto error_out;
 			}
 		}
@@ -328,14 +329,13 @@
 	reply.magic = 0;
 	result = sock_xmit(lo, 0, &reply, sizeof(reply), MSG_WAITALL);
 	if (result <= 0) {
-		printk(KERN_ERR "%s: Receive control failed (result %d)\n",
-				lo->disk->disk_name, result);
+		dev_err(disk_to_dev(lo->disk),
+			"Receive control failed (result %d)\n", result);
 		goto harderror;
 	}
 
 	if (ntohl(reply.magic) != NBD_REPLY_MAGIC) {
-		printk(KERN_ERR "%s: Wrong magic (0x%lx)\n",
-				lo->disk->disk_name,
+		dev_err(disk_to_dev(lo->disk), "Wrong magic (0x%lx)\n",
 				(unsigned long)ntohl(reply.magic));
 		result = -EPROTO;
 		goto harderror;
@@ -347,15 +347,15 @@
 		if (result != -ENOENT)
 			goto harderror;
 
-		printk(KERN_ERR "%s: Unexpected reply (%p)\n",
-				lo->disk->disk_name, reply.handle);
+		dev_err(disk_to_dev(lo->disk), "Unexpected reply (%p)\n",
+			reply.handle);
 		result = -EBADR;
 		goto harderror;
 	}
 
 	if (ntohl(reply.error)) {
-		printk(KERN_ERR "%s: Other side returned error (%d)\n",
-				lo->disk->disk_name, ntohl(reply.error));
+		dev_err(disk_to_dev(lo->disk), "Other side returned error (%d)\n",
+			ntohl(reply.error));
 		req->errors++;
 		return req;
 	}
@@ -369,8 +369,8 @@
 		rq_for_each_segment(bvec, req, iter) {
 			result = sock_recv_bvec(lo, bvec);
 			if (result <= 0) {
-				printk(KERN_ERR "%s: Receive data failed (result %d)\n",
-						lo->disk->disk_name, result);
+				dev_err(disk_to_dev(lo->disk), "Receive data failed (result %d)\n",
+					result);
 				req->errors++;
 				return req;
 			}
@@ -405,10 +405,10 @@
 
 	BUG_ON(lo->magic != LO_MAGIC);
 
-	lo->pid = current->pid;
-	ret = sysfs_create_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+	lo->pid = task_pid_nr(current);
+	ret = device_create_file(disk_to_dev(lo->disk), &pid_attr);
 	if (ret) {
-		printk(KERN_ERR "nbd: sysfs_create_file failed!");
+		dev_err(disk_to_dev(lo->disk), "device_create_file failed!\n");
 		lo->pid = 0;
 		return ret;
 	}
@@ -416,7 +416,7 @@
 	while ((req = nbd_read_stat(lo)) != NULL)
 		nbd_end_request(req);
 
-	sysfs_remove_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+	device_remove_file(disk_to_dev(lo->disk), &pid_attr);
 	lo->pid = 0;
 	return 0;
 }
@@ -457,8 +457,8 @@
 	if (rq_data_dir(req) == WRITE) {
 		nbd_cmd(req) = NBD_CMD_WRITE;
 		if (lo->flags & NBD_READ_ONLY) {
-			printk(KERN_ERR "%s: Write on read-only\n",
-					lo->disk->disk_name);
+			dev_err(disk_to_dev(lo->disk),
+				"Write on read-only\n");
 			goto error_out;
 		}
 	}
@@ -468,16 +468,15 @@
 	mutex_lock(&lo->tx_lock);
 	if (unlikely(!lo->sock)) {
 		mutex_unlock(&lo->tx_lock);
-		printk(KERN_ERR "%s: Attempted send on closed socket\n",
-		       lo->disk->disk_name);
+		dev_err(disk_to_dev(lo->disk),
+			"Attempted send on closed socket\n");
 		goto error_out;
 	}
 
 	lo->active_req = req;
 
 	if (nbd_send_req(lo, req) != 0) {
-		printk(KERN_ERR "%s: Request send failed\n",
-				lo->disk->disk_name);
+		dev_err(disk_to_dev(lo->disk), "Request send failed\n");
 		req->errors++;
 		nbd_end_request(req);
 	} else {
@@ -549,8 +548,8 @@
 		BUG_ON(lo->magic != LO_MAGIC);
 
 		if (unlikely(!lo->sock)) {
-			printk(KERN_ERR "%s: Attempted send on closed socket\n",
-				lo->disk->disk_name);
+			dev_err(disk_to_dev(lo->disk),
+				"Attempted send on closed socket\n");
 			req->errors++;
 			nbd_end_request(req);
 			spin_lock_irq(q->queue_lock);
@@ -576,7 +575,7 @@
 	case NBD_DISCONNECT: {
 		struct request sreq;
 
-	        printk(KERN_INFO "%s: NBD_DISCONNECT\n", lo->disk->disk_name);
+		dev_info(disk_to_dev(lo->disk), "NBD_DISCONNECT\n");
 
 		blk_rq_init(NULL, &sreq);
 		sreq.cmd_type = REQ_TYPE_SPECIAL;
@@ -674,7 +673,7 @@
 		file = lo->file;
 		lo->file = NULL;
 		nbd_clear_que(lo);
-		printk(KERN_WARNING "%s: queue cleared\n", lo->disk->disk_name);
+		dev_warn(disk_to_dev(lo->disk), "queue cleared\n");
 		if (file)
 			fput(file);
 		lo->bytesize = 0;
@@ -694,8 +693,8 @@
 		return 0;
 
 	case NBD_PRINT_DEBUG:
-		printk(KERN_INFO "%s: next = %p, prev = %p, head = %p\n",
-			bdev->bd_disk->disk_name,
+		dev_info(disk_to_dev(lo->disk),
+			"next = %p, prev = %p, head = %p\n",
 			lo->queue_head.next, lo->queue_head.prev,
 			&lo->queue_head);
 		return 0;
@@ -745,7 +744,7 @@
 	BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
 
 	if (max_part < 0) {
-		printk(KERN_CRIT "nbd: max_part must be >= 0\n");
+		printk(KERN_ERR "nbd: max_part must be >= 0\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 6b9a200..a79fb4f 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -630,6 +630,7 @@
 		if (dev->status & 0x10)
 			return -ETIME;
 
+	memset(&hdr, 0, sizeof(hdr));
 	hdr.magic = PG_MAGIC;
 	hdr.dlen = dev->dlen;
 	copy = 0;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index e133f09..a63b0a2 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2444,7 +2444,7 @@
 	pkt_bio_finished(pd);
 }
 
-static int pkt_make_request(struct request_queue *q, struct bio *bio)
+static void pkt_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct pktcdvd_device *pd;
 	char b[BDEVNAME_SIZE];
@@ -2473,7 +2473,7 @@
 		cloned_bio->bi_end_io = pkt_end_io_read_cloned;
 		pd->stats.secs_r += bio->bi_size >> 9;
 		pkt_queue_bio(pd, cloned_bio);
-		return 0;
+		return;
 	}
 
 	if (!test_bit(PACKET_WRITABLE, &pd->flags)) {
@@ -2509,7 +2509,7 @@
 			pkt_make_request(q, &bp->bio1);
 			pkt_make_request(q, &bp->bio2);
 			bio_pair_release(bp);
-			return 0;
+			return;
 		}
 	}
 
@@ -2533,7 +2533,7 @@
 				}
 				spin_unlock(&pkt->lock);
 				spin_unlock(&pd->cdrw.active_list_lock);
-				return 0;
+				return;
 			} else {
 				blocked_bio = 1;
 			}
@@ -2584,10 +2584,9 @@
 		 */
 		wake_up(&pd->wqueue);
 	}
-	return 0;
+	return;
 end_io:
 	bio_io_error(bio);
-	return 0;
 }
 
 
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 8e1ce2e..da0abc1 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -21,6 +21,7 @@
 #include <linux/ata.h>
 #include <linux/blkdev.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/lv1call.h>
 #include <asm/ps3stor.h>
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index b3bdb8a..f58cdcf 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -10,6 +10,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -596,7 +597,7 @@
 	return next;
 }
 
-static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+static void ps3vram_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct ps3_system_bus_device *dev = q->queuedata;
 	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
@@ -610,13 +611,11 @@
 	spin_unlock_irq(&priv->lock);
 
 	if (busy)
-		return 0;
+		return;
 
 	do {
 		bio = ps3vram_do_bio(dev, bio);
 	} while (bio);
-
-	return 0;
 }
 
 static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 031ca72..aa27120 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -513,7 +513,7 @@
 	}
 }
 
-static int mm_make_request(struct request_queue *q, struct bio *bio)
+static void mm_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct cardinfo *card = q->queuedata;
 	pr_debug("mm_make_request %llu %u\n",
@@ -525,7 +525,7 @@
 	card->biotail = &bio->bi_next;
 	spin_unlock_irq(&card->lock);
 
-	return 0;
+	return;
 }
 
 static irqreturn_t mm_interrupt(int irq, void *__card)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index e7a5750..4d0b70a 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -3,6 +3,7 @@
 #include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
+#include <linux/module.h>
 #include <linux/virtio.h>
 #include <linux/virtio_blk.h>
 #include <linux/scatterlist.h>
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 1540792..15ec4db 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -39,6 +39,9 @@
 #include <linux/list.h>
 #include <linux/delay.h>
 #include <linux/freezer.h>
+#include <linux/loop.h>
+#include <linux/falloc.h>
+#include <linux/fs.h>
 
 #include <xen/events.h>
 #include <xen/page.h>
@@ -258,13 +261,16 @@
 
 static void print_stats(struct xen_blkif *blkif)
 {
-	pr_info("xen-blkback (%s): oo %3d  |  rd %4d  |  wr %4d  |  f %4d\n",
+	pr_info("xen-blkback (%s): oo %3d  |  rd %4d  |  wr %4d  |  f %4d"
+		 "  |  ds %4d\n",
 		 current->comm, blkif->st_oo_req,
-		 blkif->st_rd_req, blkif->st_wr_req, blkif->st_f_req);
+		 blkif->st_rd_req, blkif->st_wr_req,
+		 blkif->st_f_req, blkif->st_ds_req);
 	blkif->st_print = jiffies + msecs_to_jiffies(10 * 1000);
 	blkif->st_rd_req = 0;
 	blkif->st_wr_req = 0;
 	blkif->st_oo_req = 0;
+	blkif->st_ds_req = 0;
 }
 
 int xen_blkif_schedule(void *arg)
@@ -410,6 +416,59 @@
 	return ret;
 }
 
+static void xen_blk_discard(struct xen_blkif *blkif, struct blkif_request *req)
+{
+	int err = 0;
+	int status = BLKIF_RSP_OKAY;
+	struct block_device *bdev = blkif->vbd.bdev;
+
+	if (blkif->blk_backend_type == BLKIF_BACKEND_PHY)
+		/* just forward the discard request */
+		err = blkdev_issue_discard(bdev,
+				req->u.discard.sector_number,
+				req->u.discard.nr_sectors,
+				GFP_KERNEL, 0);
+	else if (blkif->blk_backend_type == BLKIF_BACKEND_FILE) {
+		/* punch a hole in the backing file */
+		struct loop_device *lo = bdev->bd_disk->private_data;
+		struct file *file = lo->lo_backing_file;
+
+		if (file->f_op->fallocate)
+			err = file->f_op->fallocate(file,
+				FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
+				req->u.discard.sector_number << 9,
+				req->u.discard.nr_sectors << 9);
+		else
+			err = -EOPNOTSUPP;
+	} else
+		err = -EOPNOTSUPP;
+
+	if (err == -EOPNOTSUPP) {
+		pr_debug(DRV_PFX "discard op failed, not supported\n");
+		status = BLKIF_RSP_EOPNOTSUPP;
+	} else if (err)
+		status = BLKIF_RSP_ERROR;
+
+	make_response(blkif, req->id, req->operation, status);
+}
+
+static void xen_blk_drain_io(struct xen_blkif *blkif)
+{
+	atomic_set(&blkif->drain, 1);
+	do {
+		/* The initial value is one, and one refcnt taken at the
+		 * start of the xen_blkif_schedule thread. */
+		if (atomic_read(&blkif->refcnt) <= 2)
+			break;
+		wait_for_completion_interruptible_timeout(
+				&blkif->drain_complete, HZ);
+
+		if (!atomic_read(&blkif->drain))
+			break;
+	} while (!kthread_should_stop());
+	atomic_set(&blkif->drain, 0);
+}
+
 /*
  * Completion callback on the bio's. Called as bh->b_end_io()
  */
@@ -422,6 +481,11 @@
 		pr_debug(DRV_PFX "flush diskcache op failed, not supported\n");
 		xen_blkbk_flush_diskcache(XBT_NIL, pending_req->blkif->be, 0);
 		pending_req->status = BLKIF_RSP_EOPNOTSUPP;
+	} else if ((pending_req->operation == BLKIF_OP_WRITE_BARRIER) &&
+		    (error == -EOPNOTSUPP)) {
+		pr_debug(DRV_PFX "write barrier op failed, not supported\n");
+		xen_blkbk_barrier(XBT_NIL, pending_req->blkif->be, 0);
+		pending_req->status = BLKIF_RSP_EOPNOTSUPP;
 	} else if (error) {
 		pr_debug(DRV_PFX "Buffer not up-to-date at end of operation,"
 			 " error=%d\n", error);
@@ -438,6 +502,10 @@
 		make_response(pending_req->blkif, pending_req->id,
 			      pending_req->operation, pending_req->status);
 		xen_blkif_put(pending_req->blkif);
+		if (atomic_read(&pending_req->blkif->refcnt) <= 2) {
+			if (atomic_read(&pending_req->blkif->drain))
+				complete(&pending_req->blkif->drain_complete);
+		}
 		free_req(pending_req);
 	}
 }
@@ -532,7 +600,6 @@
 
 	return more_to_do;
 }
-
 /*
  * Transmutation of the 'struct blkif_request' to a proper 'struct bio'
  * and call the 'submit_bio' to pass it to the underlying storage.
@@ -549,6 +616,7 @@
 	int i, nbio = 0;
 	int operation;
 	struct blk_plug plug;
+	bool drain = false;
 
 	switch (req->operation) {
 	case BLKIF_OP_READ:
@@ -559,11 +627,16 @@
 		blkif->st_wr_req++;
 		operation = WRITE_ODIRECT;
 		break;
+	case BLKIF_OP_WRITE_BARRIER:
+		drain = true;
 	case BLKIF_OP_FLUSH_DISKCACHE:
 		blkif->st_f_req++;
 		operation = WRITE_FLUSH;
 		break;
-	case BLKIF_OP_WRITE_BARRIER:
+	case BLKIF_OP_DISCARD:
+		blkif->st_ds_req++;
+		operation = REQ_DISCARD;
+		break;
 	default:
 		operation = 0; /* make gcc happy */
 		goto fail_response;
@@ -572,7 +645,8 @@
 
 	/* Check that the number of segments is sane. */
 	nseg = req->nr_segments;
-	if (unlikely(nseg == 0 && operation != WRITE_FLUSH) ||
+	if (unlikely(nseg == 0 && operation != WRITE_FLUSH &&
+				operation != REQ_DISCARD) ||
 	    unlikely(nseg > BLKIF_MAX_SEGMENTS_PER_REQUEST)) {
 		pr_debug(DRV_PFX "Bad number of segments in request (%d)\n",
 			 nseg);
@@ -621,16 +695,25 @@
 		}
 	}
 
+	/* Wait on all outstanding I/O's and once that has been completed
+	 * issue the WRITE_FLUSH.
+	 */
+	if (drain)
+		xen_blk_drain_io(pending_req->blkif);
+
 	/*
 	 * If we have failed at this point, we need to undo the M2P override,
 	 * set gnttab_set_unmap_op on all of the grant references and perform
 	 * the hypercall to unmap the grants - that is all done in
 	 * xen_blkbk_unmap.
 	 */
-	if (xen_blkbk_map(req, pending_req, seg))
+	if (operation != REQ_DISCARD && xen_blkbk_map(req, pending_req, seg))
 		goto fail_flush;
 
-	/* This corresponding xen_blkif_put is done in __end_block_io_op */
+	/*
+	 * This corresponding xen_blkif_put is done in __end_block_io_op, or
+	 * below (in "!bio") if we are handling a BLKIF_OP_DISCARD.
+	 */
 	xen_blkif_get(blkif);
 
 	for (i = 0; i < nseg; i++) {
@@ -654,18 +737,25 @@
 		preq.sector_number += seg[i].nsec;
 	}
 
-	/* This will be hit if the operation was a flush. */
+	/* This will be hit if the operation was a flush or discard. */
 	if (!bio) {
-		BUG_ON(operation != WRITE_FLUSH);
+		BUG_ON(operation != WRITE_FLUSH && operation != REQ_DISCARD);
 
-		bio = bio_alloc(GFP_KERNEL, 0);
-		if (unlikely(bio == NULL))
-			goto fail_put_bio;
+		if (operation == WRITE_FLUSH) {
+			bio = bio_alloc(GFP_KERNEL, 0);
+			if (unlikely(bio == NULL))
+				goto fail_put_bio;
 
-		biolist[nbio++] = bio;
-		bio->bi_bdev    = preq.bdev;
-		bio->bi_private = pending_req;
-		bio->bi_end_io  = end_block_io_op;
+			biolist[nbio++] = bio;
+			bio->bi_bdev    = preq.bdev;
+			bio->bi_private = pending_req;
+			bio->bi_end_io  = end_block_io_op;
+		} else if (operation == REQ_DISCARD) {
+			xen_blk_discard(blkif, req);
+			xen_blkif_put(blkif);
+			free_req(pending_req);
+			return 0;
+		}
 	}
 
 	/*
@@ -685,7 +775,7 @@
 
 	if (operation == READ)
 		blkif->st_rd_sect += preq.nr_sects;
-	else if (operation == WRITE || operation == WRITE_FLUSH)
+	else if (operation & WRITE)
 		blkif->st_wr_sect += preq.nr_sects;
 
 	return 0;
@@ -765,9 +855,9 @@
 
 	mmap_pages = xen_blkif_reqs * BLKIF_MAX_SEGMENTS_PER_REQUEST;
 
-	blkbk->pending_reqs          = kmalloc(sizeof(blkbk->pending_reqs[0]) *
+	blkbk->pending_reqs          = kzalloc(sizeof(blkbk->pending_reqs[0]) *
 					xen_blkif_reqs, GFP_KERNEL);
-	blkbk->pending_grant_handles = kzalloc(sizeof(blkbk->pending_grant_handles[0]) *
+	blkbk->pending_grant_handles = kmalloc(sizeof(blkbk->pending_grant_handles[0]) *
 					mmap_pages, GFP_KERNEL);
 	blkbk->pending_pages         = kzalloc(sizeof(blkbk->pending_pages[0]) *
 					mmap_pages, GFP_KERNEL);
@@ -790,8 +880,6 @@
 	if (rc)
 		goto failed_init;
 
-	memset(blkbk->pending_reqs, 0, sizeof(blkbk->pending_reqs));
-
 	INIT_LIST_HEAD(&blkbk->pending_free);
 	spin_lock_init(&blkbk->pending_free_lock);
 	init_waitqueue_head(&blkbk->pending_free_wq);
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index c4bd340..dfb1b3a 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -62,13 +62,26 @@
 
 /* i386 protocol version */
 #pragma pack(push, 4)
+
+struct blkif_x86_32_request_rw {
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+};
+
+struct blkif_x86_32_request_discard {
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	uint64_t nr_sectors;
+};
+
 struct blkif_x86_32_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	uint8_t        nr_segments;  /* number of segments                   */
 	blkif_vdev_t   handle;       /* only for read/write requests         */
 	uint64_t       id;           /* private guest value, echoed in resp  */
-	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
-	struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+	union {
+		struct blkif_x86_32_request_rw rw;
+		struct blkif_x86_32_request_discard discard;
+	} u;
 };
 struct blkif_x86_32_response {
 	uint64_t        id;              /* copied from request */
@@ -78,13 +91,26 @@
 #pragma pack(pop)
 
 /* x86_64 protocol version */
+
+struct blkif_x86_64_request_rw {
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+};
+
+struct blkif_x86_64_request_discard {
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	uint64_t nr_sectors;
+};
+
 struct blkif_x86_64_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	uint8_t        nr_segments;  /* number of segments                   */
 	blkif_vdev_t   handle;       /* only for read/write requests         */
 	uint64_t       __attribute__((__aligned__(8))) id;
-	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
-	struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+	union {
+		struct blkif_x86_64_request_rw rw;
+		struct blkif_x86_64_request_discard discard;
+	} u;
 };
 struct blkif_x86_64_response {
 	uint64_t       __attribute__((__aligned__(8))) id;
@@ -112,6 +138,11 @@
 	BLKIF_PROTOCOL_X86_64 = 3,
 };
 
+enum blkif_backend_type {
+	BLKIF_BACKEND_PHY  = 1,
+	BLKIF_BACKEND_FILE = 2,
+};
+
 struct xen_vbd {
 	/* What the domain refers to this vbd as. */
 	blkif_vdev_t		handle;
@@ -137,8 +168,9 @@
 	unsigned int		irq;
 	/* Comms information. */
 	enum blkif_protocol	blk_protocol;
+	enum blkif_backend_type blk_backend_type;
 	union blkif_back_rings	blk_rings;
-	struct vm_struct	*blk_ring_area;
+	void			*blk_ring;
 	/* The VBD attached to this interface. */
 	struct xen_vbd		vbd;
 	/* Back pointer to the backend_info. */
@@ -148,6 +180,9 @@
 	atomic_t		refcnt;
 
 	wait_queue_head_t	wq;
+	/* for barrier (drain) requests */
+	struct completion	drain_complete;
+	atomic_t		drain;
 	/* One thread per one blkif. */
 	struct task_struct	*xenblkd;
 	unsigned int		waiting_reqs;
@@ -158,13 +193,11 @@
 	int			st_wr_req;
 	int			st_oo_req;
 	int			st_f_req;
+	int			st_ds_req;
 	int			st_rd_sect;
 	int			st_wr_sect;
 
 	wait_queue_head_t	waiting_to_free;
-
-	grant_handle_t		shmem_handle;
-	grant_ref_t		shmem_ref;
 };
 
 
@@ -181,7 +214,7 @@
 
 struct phys_req {
 	unsigned short		dev;
-	unsigned short		nr_sects;
+	blkif_sector_t		nr_sects;
 	struct block_device	*bdev;
 	blkif_sector_t		sector_number;
 };
@@ -195,6 +228,8 @@
 int xen_blkbk_flush_diskcache(struct xenbus_transaction xbt,
 			      struct backend_info *be, int state);
 
+int xen_blkbk_barrier(struct xenbus_transaction xbt,
+		      struct backend_info *be, int state);
 struct xenbus_device *xen_blkbk_xenbus(struct backend_info *be);
 
 static inline void blkif_get_x86_32_req(struct blkif_request *dst,
@@ -205,12 +240,25 @@
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	dst->u.rw.sector_number = src->sector_number;
-	barrier();
-	if (n > dst->nr_segments)
-		n = dst->nr_segments;
-	for (i = 0; i < n; i++)
-		dst->u.rw.seg[i] = src->seg[i];
+	switch (src->operation) {
+	case BLKIF_OP_READ:
+	case BLKIF_OP_WRITE:
+	case BLKIF_OP_WRITE_BARRIER:
+	case BLKIF_OP_FLUSH_DISKCACHE:
+		dst->u.rw.sector_number = src->u.rw.sector_number;
+		barrier();
+		if (n > dst->nr_segments)
+			n = dst->nr_segments;
+		for (i = 0; i < n; i++)
+			dst->u.rw.seg[i] = src->u.rw.seg[i];
+		break;
+	case BLKIF_OP_DISCARD:
+		dst->u.discard.sector_number = src->u.discard.sector_number;
+		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
+		break;
+	default:
+		break;
+	}
 }
 
 static inline void blkif_get_x86_64_req(struct blkif_request *dst,
@@ -221,12 +269,25 @@
 	dst->nr_segments = src->nr_segments;
 	dst->handle = src->handle;
 	dst->id = src->id;
-	dst->u.rw.sector_number = src->sector_number;
-	barrier();
-	if (n > dst->nr_segments)
-		n = dst->nr_segments;
-	for (i = 0; i < n; i++)
-		dst->u.rw.seg[i] = src->seg[i];
+	switch (src->operation) {
+	case BLKIF_OP_READ:
+	case BLKIF_OP_WRITE:
+	case BLKIF_OP_WRITE_BARRIER:
+	case BLKIF_OP_FLUSH_DISKCACHE:
+		dst->u.rw.sector_number = src->u.rw.sector_number;
+		barrier();
+		if (n > dst->nr_segments)
+			n = dst->nr_segments;
+		for (i = 0; i < n; i++)
+			dst->u.rw.seg[i] = src->u.rw.seg[i];
+		break;
+	case BLKIF_OP_DISCARD:
+		dst->u.discard.sector_number = src->u.discard.sector_number;
+		dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
+		break;
+	default:
+		break;
+	}
 }
 
 #endif /* __XEN_BLKIF__BACKEND__COMMON_H__ */
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 5fd2010..f759ad4 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -114,44 +114,14 @@
 	spin_lock_init(&blkif->blk_ring_lock);
 	atomic_set(&blkif->refcnt, 1);
 	init_waitqueue_head(&blkif->wq);
+	init_completion(&blkif->drain_complete);
+	atomic_set(&blkif->drain, 0);
 	blkif->st_print = jiffies;
 	init_waitqueue_head(&blkif->waiting_to_free);
 
 	return blkif;
 }
 
-static int map_frontend_page(struct xen_blkif *blkif, unsigned long shared_page)
-{
-	struct gnttab_map_grant_ref op;
-
-	gnttab_set_map_op(&op, (unsigned long)blkif->blk_ring_area->addr,
-			  GNTMAP_host_map, shared_page, blkif->domid);
-
-	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
-		BUG();
-
-	if (op.status) {
-		DPRINTK("Grant table operation failure !\n");
-		return op.status;
-	}
-
-	blkif->shmem_ref = shared_page;
-	blkif->shmem_handle = op.handle;
-
-	return 0;
-}
-
-static void unmap_frontend_page(struct xen_blkif *blkif)
-{
-	struct gnttab_unmap_grant_ref op;
-
-	gnttab_set_unmap_op(&op, (unsigned long)blkif->blk_ring_area->addr,
-			    GNTMAP_host_map, blkif->shmem_handle);
-
-	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
-		BUG();
-}
-
 static int xen_blkif_map(struct xen_blkif *blkif, unsigned long shared_page,
 			 unsigned int evtchn)
 {
@@ -161,35 +131,29 @@
 	if (blkif->irq)
 		return 0;
 
-	blkif->blk_ring_area = alloc_vm_area(PAGE_SIZE);
-	if (!blkif->blk_ring_area)
-		return -ENOMEM;
-
-	err = map_frontend_page(blkif, shared_page);
-	if (err) {
-		free_vm_area(blkif->blk_ring_area);
+	err = xenbus_map_ring_valloc(blkif->be->dev, shared_page, &blkif->blk_ring);
+	if (err < 0)
 		return err;
-	}
 
 	switch (blkif->blk_protocol) {
 	case BLKIF_PROTOCOL_NATIVE:
 	{
 		struct blkif_sring *sring;
-		sring = (struct blkif_sring *)blkif->blk_ring_area->addr;
+		sring = (struct blkif_sring *)blkif->blk_ring;
 		BACK_RING_INIT(&blkif->blk_rings.native, sring, PAGE_SIZE);
 		break;
 	}
 	case BLKIF_PROTOCOL_X86_32:
 	{
 		struct blkif_x86_32_sring *sring_x86_32;
-		sring_x86_32 = (struct blkif_x86_32_sring *)blkif->blk_ring_area->addr;
+		sring_x86_32 = (struct blkif_x86_32_sring *)blkif->blk_ring;
 		BACK_RING_INIT(&blkif->blk_rings.x86_32, sring_x86_32, PAGE_SIZE);
 		break;
 	}
 	case BLKIF_PROTOCOL_X86_64:
 	{
 		struct blkif_x86_64_sring *sring_x86_64;
-		sring_x86_64 = (struct blkif_x86_64_sring *)blkif->blk_ring_area->addr;
+		sring_x86_64 = (struct blkif_x86_64_sring *)blkif->blk_ring;
 		BACK_RING_INIT(&blkif->blk_rings.x86_64, sring_x86_64, PAGE_SIZE);
 		break;
 	}
@@ -201,8 +165,7 @@
 						    xen_blkif_be_int, 0,
 						    "blkif-backend", blkif);
 	if (err < 0) {
-		unmap_frontend_page(blkif);
-		free_vm_area(blkif->blk_ring_area);
+		xenbus_unmap_ring_vfree(blkif->be->dev, blkif->blk_ring);
 		blkif->blk_rings.common.sring = NULL;
 		return err;
 	}
@@ -228,8 +191,7 @@
 	}
 
 	if (blkif->blk_rings.common.sring) {
-		unmap_frontend_page(blkif);
-		free_vm_area(blkif->blk_ring_area);
+		xenbus_unmap_ring_vfree(blkif->be->dev, blkif->blk_ring);
 		blkif->blk_rings.common.sring = NULL;
 	}
 }
@@ -272,6 +234,7 @@
 VBD_SHOW(rd_req,  "%d\n", be->blkif->st_rd_req);
 VBD_SHOW(wr_req,  "%d\n", be->blkif->st_wr_req);
 VBD_SHOW(f_req,  "%d\n", be->blkif->st_f_req);
+VBD_SHOW(ds_req,  "%d\n", be->blkif->st_ds_req);
 VBD_SHOW(rd_sect, "%d\n", be->blkif->st_rd_sect);
 VBD_SHOW(wr_sect, "%d\n", be->blkif->st_wr_sect);
 
@@ -280,6 +243,7 @@
 	&dev_attr_rd_req.attr,
 	&dev_attr_wr_req.attr,
 	&dev_attr_f_req.attr,
+	&dev_attr_ds_req.attr,
 	&dev_attr_rd_sect.attr,
 	&dev_attr_wr_sect.attr,
 	NULL
@@ -419,6 +383,73 @@
 	return err;
 }
 
+int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be)
+{
+	struct xenbus_device *dev = be->dev;
+	struct xen_blkif *blkif = be->blkif;
+	char *type;
+	int err;
+	int state = 0;
+
+	type = xenbus_read(XBT_NIL, dev->nodename, "type", NULL);
+	if (!IS_ERR(type)) {
+		if (strncmp(type, "file", 4) == 0) {
+			state = 1;
+			blkif->blk_backend_type = BLKIF_BACKEND_FILE;
+		}
+		if (strncmp(type, "phy", 3) == 0) {
+			struct block_device *bdev = be->blkif->vbd.bdev;
+			struct request_queue *q = bdev_get_queue(bdev);
+			if (blk_queue_discard(q)) {
+				err = xenbus_printf(xbt, dev->nodename,
+					"discard-granularity", "%u",
+					q->limits.discard_granularity);
+				if (err) {
+					xenbus_dev_fatal(dev, err,
+						"writing discard-granularity");
+					goto kfree;
+				}
+				err = xenbus_printf(xbt, dev->nodename,
+					"discard-alignment", "%u",
+					q->limits.discard_alignment);
+				if (err) {
+					xenbus_dev_fatal(dev, err,
+						"writing discard-alignment");
+					goto kfree;
+				}
+				state = 1;
+				blkif->blk_backend_type = BLKIF_BACKEND_PHY;
+			}
+		}
+	} else {
+		err = PTR_ERR(type);
+		xenbus_dev_fatal(dev, err, "reading type");
+		goto out;
+	}
+
+	err = xenbus_printf(xbt, dev->nodename, "feature-discard",
+			    "%d", state);
+	if (err)
+		xenbus_dev_fatal(dev, err, "writing feature-discard");
+kfree:
+	kfree(type);
+out:
+	return err;
+}
+int xen_blkbk_barrier(struct xenbus_transaction xbt,
+		      struct backend_info *be, int state)
+{
+	struct xenbus_device *dev = be->dev;
+	int err;
+
+	err = xenbus_printf(xbt, dev->nodename, "feature-barrier",
+			    "%d", state);
+	if (err)
+		xenbus_dev_fatal(dev, err, "writing feature-barrier");
+
+	return err;
+}
+
 /*
  * Entry point to this code when a new device is created.  Allocate the basic
  * structures, and watch the store waiting for the hotplug scripts to tell us
@@ -650,6 +681,11 @@
 	if (err)
 		goto abort;
 
+	err = xen_blkbk_discard(xbt, be);
+
+	/* If we can't advertise it is OK. */
+	err = xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
+
 	err = xenbus_printf(xbt, dev->nodename, "sectors", "%llu",
 			    (unsigned long long)vbd_sz(&be->blkif->vbd));
 	if (err) {
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 9ea8c25..7b2ec59 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -98,6 +98,9 @@
 	unsigned long shadow_free;
 	unsigned int feature_flush;
 	unsigned int flush_op;
+	unsigned int feature_discard;
+	unsigned int discard_granularity;
+	unsigned int discard_alignment;
 	int is_ready;
 };
 
@@ -302,29 +305,36 @@
 		ring_req->operation = info->flush_op;
 	}
 
-	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
-	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+	if (unlikely(req->cmd_flags & REQ_DISCARD)) {
+		/* id, sector_number and handle are set above. */
+		ring_req->operation = BLKIF_OP_DISCARD;
+		ring_req->nr_segments = 0;
+		ring_req->u.discard.nr_sectors = blk_rq_sectors(req);
+	} else {
+		ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+		BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
 
-	for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
-		buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
-		fsect = sg->offset >> 9;
-		lsect = fsect + (sg->length >> 9) - 1;
-		/* install a grant reference. */
-		ref = gnttab_claim_grant_reference(&gref_head);
-		BUG_ON(ref == -ENOSPC);
+		for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+			buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+			fsect = sg->offset >> 9;
+			lsect = fsect + (sg->length >> 9) - 1;
+			/* install a grant reference. */
+			ref = gnttab_claim_grant_reference(&gref_head);
+			BUG_ON(ref == -ENOSPC);
 
-		gnttab_grant_foreign_access_ref(
-				ref,
-				info->xbdev->otherend_id,
-				buffer_mfn,
-				rq_data_dir(req) );
+			gnttab_grant_foreign_access_ref(
+					ref,
+					info->xbdev->otherend_id,
+					buffer_mfn,
+					rq_data_dir(req));
 
-		info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
-		ring_req->u.rw.seg[i] =
-				(struct blkif_request_segment) {
-					.gref       = ref,
-					.first_sect = fsect,
-					.last_sect  = lsect };
+			info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+			ring_req->u.rw.seg[i] =
+					(struct blkif_request_segment) {
+						.gref       = ref,
+						.first_sect = fsect,
+						.last_sect  = lsect };
+		}
 	}
 
 	info->ring.req_prod_pvt++;
@@ -370,7 +380,9 @@
 
 		blk_start_request(req);
 
-		if (req->cmd_type != REQ_TYPE_FS) {
+		if ((req->cmd_type != REQ_TYPE_FS) ||
+		    ((req->cmd_flags & (REQ_FLUSH | REQ_FUA)) &&
+		    !info->flush_op)) {
 			__blk_end_request_all(req, -EIO);
 			continue;
 		}
@@ -399,6 +411,7 @@
 static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
 {
 	struct request_queue *rq;
+	struct blkfront_info *info = gd->private_data;
 
 	rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
 	if (rq == NULL)
@@ -406,6 +419,13 @@
 
 	queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq);
 
+	if (info->feature_discard) {
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, rq);
+		blk_queue_max_discard_sectors(rq, get_capacity(gd));
+		rq->limits.discard_granularity = info->discard_granularity;
+		rq->limits.discard_alignment = info->discard_alignment;
+	}
+
 	/* Hard sector size and max sectors impersonate the equiv. hardware. */
 	blk_queue_logical_block_size(rq, sector_size);
 	blk_queue_max_hw_sectors(rq, 512);
@@ -722,6 +742,17 @@
 
 		error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
 		switch (bret->operation) {
+		case BLKIF_OP_DISCARD:
+			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
+				struct request_queue *rq = info->rq;
+				printk(KERN_WARNING "blkfront: %s: discard op failed\n",
+					   info->gd->disk_name);
+				error = -EOPNOTSUPP;
+				info->feature_discard = 0;
+				queue_flag_clear(QUEUE_FLAG_DISCARD, rq);
+			}
+			__blk_end_request_all(req, error);
+			break;
 		case BLKIF_OP_FLUSH_DISKCACHE:
 		case BLKIF_OP_WRITE_BARRIER:
 			if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
@@ -1098,6 +1129,33 @@
 	bdput(bdev);
 }
 
+static void blkfront_setup_discard(struct blkfront_info *info)
+{
+	int err;
+	char *type;
+	unsigned int discard_granularity;
+	unsigned int discard_alignment;
+
+	type = xenbus_read(XBT_NIL, info->xbdev->otherend, "type", NULL);
+	if (IS_ERR(type))
+		return;
+
+	if (strncmp(type, "phy", 3) == 0) {
+		err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
+			"discard-granularity", "%u", &discard_granularity,
+			"discard-alignment", "%u", &discard_alignment,
+			NULL);
+		if (!err) {
+			info->feature_discard = 1;
+			info->discard_granularity = discard_granularity;
+			info->discard_alignment = discard_alignment;
+		}
+	} else if (strncmp(type, "file", 4) == 0)
+		info->feature_discard = 1;
+
+	kfree(type);
+}
+
 /*
  * Invoked when the backend is finally 'ready' (and has told produced
  * the details about the physical device - #sectors, size, etc).
@@ -1108,7 +1166,7 @@
 	unsigned long sector_size;
 	unsigned int binfo;
 	int err;
-	int barrier, flush;
+	int barrier, flush, discard;
 
 	switch (info->connected) {
 	case BLKIF_STATE_CONNECTED:
@@ -1178,7 +1236,14 @@
 		info->feature_flush = REQ_FLUSH;
 		info->flush_op = BLKIF_OP_FLUSH_DISKCACHE;
 	}
-		
+
+	err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
+			    "feature-discard", "%d", &discard,
+			    NULL);
+
+	if (!err && discard)
+		blkfront_setup_discard(info);
+
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {
 		xenbus_dev_fatal(info->xbdev, err, "xlvbd_add at %s",
@@ -1385,6 +1450,8 @@
 
 static int __init xlblk_init(void)
 {
+	int ret;
+
 	if (!xen_domain())
 		return -ENODEV;
 
@@ -1394,7 +1461,13 @@
 		return -ENODEV;
 	}
 
-	return xenbus_register_frontend(&blkfront);
+	ret = xenbus_register_frontend(&blkfront);
+	if (ret) {
+		unregister_blkdev(XENVBD_MAJOR, DEV_NAME);
+		return ret;
+	}
+
+	return 0;
 }
 module_init(xlblk_init);
 
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index db7cb81..106beb1 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -105,7 +105,7 @@
 
 	pipe = usb_sndctrlpipe(udev, 0);
 
-	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+	send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 	if (!send_buf) {
 		BT_ERR("Can't allocate memory chunk for firmware");
 		return -ENOMEM;
@@ -176,7 +176,7 @@
 
 	count = firmware->size;
 
-	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+	send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 	if (!send_buf) {
 		BT_ERR("Can't allocate memory chunk for firmware");
 		return -ENOMEM;
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 8b1b643..54952ab 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -24,6 +24,7 @@
 
 #include <linux/module.h>
 
+#include <linux/atomic.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -65,6 +66,7 @@
 	unsigned long		state;
 
 	struct work_struct	work;
+	atomic_t		shutdown;
 
 	struct urb		*urb;
 	unsigned char		*buffer;
@@ -97,6 +99,7 @@
 
 		data->state = BCM203X_SELECT_MEMORY;
 
+		/* use workqueue to have a small delay */
 		schedule_work(&data->work);
 		break;
 
@@ -155,7 +158,10 @@
 	struct bcm203x_data *data =
 		container_of(work, struct bcm203x_data, work);
 
-	if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+	if (atomic_read(&data->shutdown))
+		return;
+
+	if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
 		BT_ERR("Can't submit URB");
 }
 
@@ -243,6 +249,7 @@
 
 	usb_set_intfdata(intf, data);
 
+	/* use workqueue to have a small delay */
 	schedule_work(&data->work);
 
 	return 0;
@@ -254,6 +261,9 @@
 
 	BT_DBG("intf %p", intf);
 
+	atomic_inc(&data->shutdown);
+	cancel_work_sync(&data->work);
+
 	usb_kill_urb(data->urb);
 
 	usb_set_intfdata(intf, NULL);
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 005919a..61b5914 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -568,22 +568,23 @@
 
 	BT_INFO("BlueFRITZ! USB loading firmware");
 
+	buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_KERNEL);
+	if (!buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
 	pipe = usb_sndctrlpipe(data->udev, 0);
 
 	if (usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION,
 				0, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT) < 0) {
 		BT_ERR("Can't change to loading configuration");
+		kfree(buf);
 		return -EBUSY;
 	}
 
 	data->udev->toggle[0] = data->udev->toggle[1] = 0;
 
-	buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_ATOMIC);
-	if (!buf) {
-		BT_ERR("Can't allocate memory chunk for firmware");
-		return -ENOMEM;
-	}
-
 	pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep);
 
 	while (count) {
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 548d1d9..a88a78c 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -18,6 +18,8 @@
  * this warranty disclaimer.
  **/
 
+#include <linux/module.h>
+
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index c827d73..9ef4816 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -23,6 +23,7 @@
 
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
+#include <linux/module.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f9b7260..fe4ebc3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -100,6 +100,9 @@
 	/* Canyon CN-BTU1 with HID interfaces */
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
+	/* Broadcom BCM20702A0 */
+	{ USB_DEVICE(0x413c, 0x8197) },
+
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 04d353f..b5f83b4 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -29,6 +29,7 @@
 #include <net/bluetooth/hci.h>
 
 #include <linux/ti_wilink_st.h>
+#include <linux/module.h>
 
 /* Bluetooth Driver Version */
 #define VERSION               "1.0"
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 66cd0b8..c92424c 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1186,10 +1186,11 @@
 /* Certain Gen5 chipsets require require idling the GPU before
  * unmapping anything from the GTT when VT-d is enabled.
  */
-extern int intel_iommu_gfx_mapped;
 static inline int needs_idle_maps(void)
 {
+#ifdef CONFIG_INTEL_IOMMU
 	const unsigned short gpu_devid = intel_private.pcidev->device;
+	extern int intel_iommu_gfx_mapped;
 
 	/* Query intel_iommu to see if we need the workaround. Presumably that
 	 * was loaded first.
@@ -1198,7 +1199,7 @@
 	     gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
 	     intel_iommu_gfx_mapped)
 		return 1;
-
+#endif
 	return 0;
 }
 
@@ -1236,7 +1237,7 @@
 		intel_private.gtt_bus_addr = reg_addr + gtt_offset;
 	}
 
-	if (needs_idle_maps());
+	if (needs_idle_maps())
 		intel_private.base.do_idle_maps = 1;
 
 	intel_i9xx_setup_flush();
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 75f1cbd..fd699cc 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
 #include <linux/virtio_rng.h>
+#include <linux/module.h>
 
 static struct virtqueue *vq;
 static unsigned int data_avail;
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 8fc04b4..1451790 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -26,6 +26,7 @@
 #include <linux/bootmem.h>
 #include <linux/splice.h>
 #include <linux/pfn.h>
+#include <linux/export.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index d0c57c2..6abdde4 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -22,6 +22,7 @@
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/lv1call.h>
 #include <asm/ps3stor.h>
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 810aff9..7c7f42a1f8 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/kmsg_dump.h>
 #include <linux/time.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 63e19ba..6035ab8 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -941,7 +941,7 @@
 		if (!arch_get_random_long(&v))
 			break;
 		
-		memcpy(buf, &v, chunk);
+		memcpy(p, &v, chunk);
 		p += chunk;
 		nbytes -= chunk;
 	}
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index f228615..eedd547 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
+#include <linux/export.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 4ca181f..8e3c46d 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -34,6 +34,7 @@
 #include <linux/virtio_console.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include "../tty/hvc/hvc_console.h"
 
 /*
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 32a77be..ca09bc4 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -31,6 +31,7 @@
 #include <linux/clockchips.h>
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct sh_cmt_priv {
 	void __iomem *mapbase;
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 40630cb..db8d595 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -30,6 +30,7 @@
 #include <linux/clockchips.h>
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct sh_mtu2_priv {
 	void __iomem *mapbase;
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8081357..079e96a 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -31,6 +31,7 @@
 #include <linux/clockchips.h>
 #include <linux/sh_timer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct sh_tmu_priv {
 	void __iomem *mapbase;
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index faf7c52..c5072a9 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -15,6 +15,7 @@
 #include <linux/cpu.h>
 #include <linux/sysfs.h>
 #include <linux/cpufreq.h>
+#include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/kobject.h>
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index d90456a..f500201 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -12,30 +12,35 @@
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <mach/id.h>
 
 static struct cpufreq_frequency_table freq_table[] = {
 	[0] = {
 		.index = 0,
-		.frequency = 300000,
+		.frequency = 200000,
 	},
 	[1] = {
 		.index = 1,
-		.frequency = 600000,
+		.frequency = 300000,
 	},
 	[2] = {
-		/* Used for MAX_OPP, if available */
 		.index = 2,
-		.frequency = CPUFREQ_TABLE_END,
+		.frequency = 600000,
 	},
 	[3] = {
+		/* Used for MAX_OPP, if available */
 		.index = 3,
 		.frequency = CPUFREQ_TABLE_END,
 	},
+	[4] = {
+		.index = 4,
+		.frequency = CPUFREQ_TABLE_END,
+	},
 };
 
 static enum arm_opp idx2opp[] = {
+	ARM_EXTCLK,
 	ARM_50_OPP,
 	ARM_100_OPP,
 	ARM_MAX_OPP
@@ -72,13 +77,13 @@
 
 	freqs.old = policy->cur;
 	freqs.new = freq_table[idx].frequency;
-	freqs.cpu = policy->cpu;
 
 	if (freqs.old == freqs.new)
 		return 0;
 
 	/* pre-change notification */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* request the PRCM unit for opp change */
 	if (prcmu_set_arm_opp(idx2opp[idx])) {
@@ -87,7 +92,8 @@
 	}
 
 	/* post change notification */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }
@@ -103,17 +109,19 @@
 
 static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int res;
-	int i;
+	int i, res;
 
 	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
 
-	if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
-		freq_table[0].frequency = 400000;
-		freq_table[1].frequency = 800000;
+	if (!prcmu_is_u8400()) {
+		freq_table[1].frequency = 400000;
+		freq_table[2].frequency = 800000;
 		if (prcmu_has_arm_maxopp())
-			freq_table[2].frequency = 1000000;
+			freq_table[3].frequency = 1000000;
 	}
+	pr_info("db8500-cpufreq : Available frequencies:\n");
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
 
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -127,10 +135,6 @@
 	policy->min = policy->cpuinfo.min_freq;
 	policy->max = policy->cpuinfo.max_freq;
 	policy->cur = db8500_cpufreq_getspeed(policy->cpu);
-
-	for (i = 0; freq_table[i].frequency != policy->cur; i++)
-		;
-
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 
 	/*
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 35a257d..4bd6815 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -19,6 +19,11 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
 #define EPS_BRAND_C7M	0
 #define EPS_BRAND_C7	1
 #define EPS_BRAND_EDEN	2
@@ -27,11 +32,59 @@
 
 struct eps_cpu_data {
 	u32 fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	u32 bios_limit;
+#endif
 	struct cpufreq_frequency_table freq_table[];
 };
 
 static struct eps_cpu_data *eps_cpu[NR_CPUS];
 
+/* Module parameters */
+static int freq_failsafe_off;
+static int voltage_failsafe_off;
+static int set_max_voltage;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+	eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance),
+				      GFP_KERNEL);
+	if (!eps_acpi_cpu_perf)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -ENOMEM;
+	}
+
+	if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -EIO;
+	}
+	return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+	if (eps_acpi_cpu_perf) {
+		acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+	}
+	return 0;
+}
+#endif
 
 static unsigned int eps_get(unsigned int cpu)
 {
@@ -164,6 +217,9 @@
 	int k, step, voltage;
 	int ret;
 	int states;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	unsigned int limit;
+#endif
 
 	if (policy->cpu != 0)
 		return -ENODEV;
@@ -244,11 +300,62 @@
 		return -EINVAL;
 	if (current_voltage > 0x1f || max_voltage > 0x1f)
 		return -EINVAL;
-	if (max_voltage < min_voltage)
+	if (max_voltage < min_voltage
+	    || current_voltage < min_voltage
+	    || current_voltage > max_voltage)
 		return -EINVAL;
 
+	/* Check for systems using underclocked CPU */
+	if (!freq_failsafe_off && max_multiplier != current_multiplier) {
+		printk(KERN_INFO "eps: Your processor is running at different "
+			"frequency then its maximum. Aborting.\n");
+		printk(KERN_INFO "eps: You can use freq_failsafe_off option "
+			"to disable this check.\n");
+		return -EINVAL;
+	}
+	if (!voltage_failsafe_off && max_voltage != current_voltage) {
+		printk(KERN_INFO "eps: Your processor is running at different "
+			"voltage then its maximum. Aborting.\n");
+		printk(KERN_INFO "eps: You can use voltage_failsafe_off "
+			"option to disable this check.\n");
+		return -EINVAL;
+	}
+
 	/* Calc FSB speed */
 	fsb = cpu_khz / current_multiplier;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	/* Check for ACPI processor speed limit */
+	if (!ignore_acpi_limit && !eps_acpi_init()) {
+		if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+			printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+				limit/1000000,
+				(limit%1000000)/10000);
+			eps_acpi_exit(policy);
+			/* Check if max_multiplier is in BIOS limits */
+			if (limit && max_multiplier * fsb > limit) {
+				printk(KERN_INFO "eps: Aborting.\n");
+				return -EINVAL;
+			}
+		}
+	}
+#endif
+
+	/* Allow user to set lower maximum voltage then that reported
+	 * by processor */
+	if (brand == EPS_BRAND_C7M && set_max_voltage) {
+		u32 v;
+
+		/* Change mV to something hardware can use */
+		v = (set_max_voltage - 700) / 16;
+		/* Check if voltage is within limits */
+		if (v >= min_voltage && v <= max_voltage) {
+			printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
+				v * 16 + 700);
+			max_voltage = v;
+		}
+	}
+
 	/* Calc number of p-states supported */
 	if (brand == EPS_BRAND_C7M)
 		states = max_multiplier - min_multiplier + 1;
@@ -265,6 +372,9 @@
 
 	/* Copy basic values */
 	centaur->fsb = fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	centaur->bios_limit = limit;
+#endif
 
 	/* Fill frequency and MSR value table */
 	f_table = &centaur->freq_table[0];
@@ -303,17 +413,7 @@
 static int eps_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	struct eps_cpu_data *centaur;
-	u32 lo, hi;
 
-	if (eps_cpu[cpu] == NULL)
-		return -ENODEV;
-	centaur = eps_cpu[cpu];
-
-	/* Get max frequency */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	/* Set max frequency */
-	eps_set_state(centaur, cpu, hi & 0xffff);
 	/* Bye */
 	cpufreq_frequency_table_put_attr(policy->cpu);
 	kfree(eps_cpu[cpu]);
@@ -359,6 +459,19 @@
 	cpufreq_unregister_driver(&eps_driver);
 }
 
+/* Allow user to overclock his machine or to change frequency to higher after
+ * unloading module */
+module_param(freq_failsafe_off, int, 0644);
+MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
+module_param(voltage_failsafe_off, int, 0644);
+MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
+module_param(set_max_voltage, int, 0644);
+MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
+
 MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
 MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index b7c3a84..ab9741f 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -17,6 +17,8 @@
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
+#include <linux/notifier.h>
+#include <linux/suspend.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -36,6 +38,10 @@
 static struct cpufreq_freqs freqs;
 static unsigned int memtype;
 
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
 enum exynos4_memory_type {
 	DDR2 = 4,
 	LPDDR2,
@@ -405,22 +411,32 @@
 {
 	unsigned int index, old_index;
 	unsigned int arm_volt, int_volt;
+	int err = -EINVAL;
 
 	freqs.old = exynos4_getspeed(policy->cpu);
 
+	mutex_lock(&cpufreq_lock);
+
+	if (frequency_locked && target_freq != locking_frequency) {
+		err = -EAGAIN;
+		goto out;
+	}
+
 	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
 					   freqs.old, relation, &old_index))
-		return -EINVAL;
+		goto out;
 
 	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
 					   target_freq, relation, &index))
-		return -EINVAL;
+		goto out;
+
+	err = 0;
 
 	freqs.new = exynos4_freq_table[index].frequency;
 	freqs.cpu = policy->cpu;
 
 	if (freqs.new == freqs.old)
-		return 0;
+		goto out;
 
 	/* get the voltage value */
 	arm_volt = exynos4_volt_table[index].arm_volt;
@@ -447,10 +463,16 @@
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+out:
+	mutex_unlock(&cpufreq_lock);
+	return err;
 }
 
 #ifdef CONFIG_PM
+/*
+ * These suspend/resume are used as syscore_ops, it is already too
+ * late to set regulator voltages at this stage.
+ */
 static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
 {
 	return 0;
@@ -462,8 +484,82 @@
 }
 #endif
 
+/**
+ * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ *			context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
+				       unsigned long pm_event, void *v)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+	static unsigned int saved_frequency;
+	unsigned int temp;
+
+	mutex_lock(&cpufreq_lock);
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		if (frequency_locked)
+			goto out;
+		frequency_locked = true;
+
+		if (locking_frequency) {
+			saved_frequency = exynos4_getspeed(0);
+
+			mutex_unlock(&cpufreq_lock);
+			exynos4_target(policy, locking_frequency,
+				       CPUFREQ_RELATION_H);
+			mutex_lock(&cpufreq_lock);
+		}
+
+		break;
+	case PM_POST_SUSPEND:
+
+		if (saved_frequency) {
+			/*
+			 * While frequency_locked, only locking_frequency
+			 * is valid for target(). In order to use
+			 * saved_frequency while keeping frequency_locked,
+			 * we temporarly overwrite locking_frequency.
+			 */
+			temp = locking_frequency;
+			locking_frequency = saved_frequency;
+
+			mutex_unlock(&cpufreq_lock);
+			exynos4_target(policy, locking_frequency,
+				       CPUFREQ_RELATION_H);
+			mutex_lock(&cpufreq_lock);
+
+			locking_frequency = temp;
+		}
+
+		frequency_locked = false;
+		break;
+	}
+out:
+	mutex_unlock(&cpufreq_lock);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block exynos4_cpufreq_nb = {
+	.notifier_call = exynos4_cpufreq_pm_notifier,
+};
+
 static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
+	int ret;
+
 	policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
 
 	cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
@@ -479,16 +575,35 @@
 	 */
 	cpumask_setall(policy->cpus);
 
-	return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+	ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+	if (ret)
+		return ret;
+
+	cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
+
+	return 0;
 }
 
+static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *exynos4_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
 static struct cpufreq_driver exynos4_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= exynos4_verify_speed,
 	.target		= exynos4_target,
 	.get		= exynos4_getspeed,
 	.init		= exynos4_cpufreq_cpu_init,
+	.exit		= exynos4_cpufreq_cpu_exit,
 	.name		= "exynos4_cpufreq",
+	.attr		= exynos4_cpufreq_attr,
 #ifdef CONFIG_PM
 	.suspend	= exynos4_cpufreq_suspend,
 	.resume		= exynos4_cpufreq_resume,
@@ -501,6 +616,8 @@
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
 
+	locking_frequency = exynos4_getspeed(0);
+
 	moutcore = clk_get(NULL, "moutcore");
 	if (IS_ERR(moutcore))
 		goto out;
@@ -540,6 +657,8 @@
 		printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
 	}
 
+	register_pm_notifier(&exynos4_cpufreq_nb);
+
 	return cpufreq_register_driver(&exynos4_driver);
 
 out:
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index b8d1d20..3475f65 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 static struct clk *armclk;
 static struct regulator *vddarm;
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 0df0141..06ce268 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -17,6 +17,7 @@
 #include <linux/cpuidle.h>
 #include <linux/ktime.h>
 #include <linux/hrtimer.h>
+#include <linux/module.h>
 #include <trace/events/power.h>
 
 #include "cpuidle.h"
@@ -61,8 +62,9 @@
 int cpuidle_idle_call(void)
 {
 	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
+	struct cpuidle_driver *drv = cpuidle_get_driver();
 	struct cpuidle_state *target_state;
-	int next_state;
+	int next_state, entered_state;
 
 	if (off)
 		return -ENODEV;
@@ -83,45 +85,36 @@
 	hrtimer_peek_ahead_timers();
 #endif
 
-	/*
-	 * Call the device's prepare function before calling the
-	 * governor's select function.  ->prepare gives the device's
-	 * cpuidle driver a chance to update any dynamic information
-	 * of its cpuidle states for the current idle period, e.g.
-	 * state availability, latencies, residencies, etc.
-	 */
-	if (dev->prepare)
-		dev->prepare(dev);
-
 	/* ask the governor for the next state */
-	next_state = cpuidle_curr_governor->select(dev);
+	next_state = cpuidle_curr_governor->select(drv, dev);
 	if (need_resched()) {
 		local_irq_enable();
 		return 0;
 	}
 
-	target_state = &dev->states[next_state];
-
-	/* enter the state and update stats */
-	dev->last_state = target_state;
+	target_state = &drv->states[next_state];
 
 	trace_power_start(POWER_CSTATE, next_state, dev->cpu);
 	trace_cpu_idle(next_state, dev->cpu);
 
-	dev->last_residency = target_state->enter(dev, target_state);
+	entered_state = target_state->enter(dev, drv, next_state);
 
 	trace_power_end(dev->cpu);
 	trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
 
-	if (dev->last_state)
-		target_state = dev->last_state;
-
-	target_state->time += (unsigned long long)dev->last_residency;
-	target_state->usage++;
+	if (entered_state >= 0) {
+		/* Update cpuidle counters */
+		/* This can be moved to within driver enter routine
+		 * but that results in multiple copies of same code.
+		 */
+		dev->states_usage[entered_state].time +=
+				(unsigned long long)dev->last_residency;
+		dev->states_usage[entered_state].usage++;
+	}
 
 	/* give the governor an opportunity to reflect on the outcome */
 	if (cpuidle_curr_governor->reflect)
-		cpuidle_curr_governor->reflect(dev);
+		cpuidle_curr_governor->reflect(dev, entered_state);
 
 	return 0;
 }
@@ -172,11 +165,11 @@
 EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock);
 
 #ifdef CONFIG_ARCH_HAS_CPU_RELAX
-static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st)
+static int poll_idle(struct cpuidle_device *dev,
+		struct cpuidle_driver *drv, int index)
 {
 	ktime_t	t1, t2;
 	s64 diff;
-	int ret;
 
 	t1 = ktime_get();
 	local_irq_enable();
@@ -188,15 +181,14 @@
 	if (diff > INT_MAX)
 		diff = INT_MAX;
 
-	ret = (int) diff;
-	return ret;
+	dev->last_residency = (int) diff;
+
+	return index;
 }
 
-static void poll_idle_init(struct cpuidle_device *dev)
+static void poll_idle_init(struct cpuidle_driver *drv)
 {
-	struct cpuidle_state *state = &dev->states[0];
-
-	cpuidle_set_statedata(state, NULL);
+	struct cpuidle_state *state = &drv->states[0];
 
 	snprintf(state->name, CPUIDLE_NAME_LEN, "POLL");
 	snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
@@ -207,7 +199,7 @@
 	state->enter = poll_idle;
 }
 #else
-static void poll_idle_init(struct cpuidle_device *dev) {}
+static void poll_idle_init(struct cpuidle_driver *drv) {}
 #endif /* CONFIG_ARCH_HAS_CPU_RELAX */
 
 /**
@@ -234,21 +226,20 @@
 			return ret;
 	}
 
-	poll_idle_init(dev);
+	poll_idle_init(cpuidle_get_driver());
 
 	if ((ret = cpuidle_add_state_sysfs(dev)))
 		return ret;
 
 	if (cpuidle_curr_governor->enable &&
-	    (ret = cpuidle_curr_governor->enable(dev)))
+	    (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev)))
 		goto fail_sysfs;
 
 	for (i = 0; i < dev->state_count; i++) {
-		dev->states[i].usage = 0;
-		dev->states[i].time = 0;
+		dev->states_usage[i].usage = 0;
+		dev->states_usage[i].time = 0;
 	}
 	dev->last_residency = 0;
-	dev->last_state = NULL;
 
 	smp_wmb();
 
@@ -282,7 +273,7 @@
 	dev->enabled = 0;
 
 	if (cpuidle_curr_governor->disable)
-		cpuidle_curr_governor->disable(dev);
+		cpuidle_curr_governor->disable(cpuidle_get_driver(), dev);
 
 	cpuidle_remove_state_sysfs(dev);
 	enabled_devices--;
@@ -310,26 +301,6 @@
 
 	init_completion(&dev->kobj_unregister);
 
-	/*
-	 * cpuidle driver should set the dev->power_specified bit
-	 * before registering the device if the driver provides
-	 * power_usage numbers.
-	 *
-	 * For those devices whose ->power_specified is not set,
-	 * we fill in power_usage with decreasing values as the
-	 * cpuidle code has an implicit assumption that state Cn
-	 * uses less power than C(n-1).
-	 *
-	 * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
-	 * an power value of -1.  So we use -2, -3, etc, for other
-	 * c-states.
-	 */
-	if (!dev->power_specified) {
-		int i;
-		for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++)
-			dev->states[i].power_usage = -1 - i;
-	}
-
 	per_cpu(cpuidle_devices, dev->cpu) = dev;
 	list_add(&dev->device_list, &cpuidle_detected_devices);
 	if ((ret = cpuidle_add_sysfs(sys_dev))) {
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index 3f7e3ce..284d7af 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -17,6 +17,30 @@
 static struct cpuidle_driver *cpuidle_curr_driver;
 DEFINE_SPINLOCK(cpuidle_driver_lock);
 
+static void __cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+	int i;
+	/*
+	 * cpuidle driver should set the drv->power_specified bit
+	 * before registering if the driver provides
+	 * power_usage numbers.
+	 *
+	 * If power_specified is not set,
+	 * we fill in power_usage with decreasing values as the
+	 * cpuidle code has an implicit assumption that state Cn
+	 * uses less power than C(n-1).
+	 *
+	 * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
+	 * an power value of -1.  So we use -2, -3, etc, for other
+	 * c-states.
+	 */
+	if (!drv->power_specified) {
+		for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++)
+			drv->states[i].power_usage = -1 - i;
+	}
+}
+
+
 /**
  * cpuidle_register_driver - registers a driver
  * @drv: the driver
@@ -34,6 +58,7 @@
 		spin_unlock(&cpuidle_driver_lock);
 		return -EBUSY;
 	}
+	__cpuidle_register_driver(drv);
 	cpuidle_curr_driver = drv;
 	spin_unlock(&cpuidle_driver_lock);
 
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index f62fde2..b6a09ea 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/cpuidle.h>
 #include <linux/pm_qos.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/jiffies.h>
 
 #include <asm/io.h>
@@ -60,9 +60,11 @@
 
 /**
  * ladder_select_state - selects the next state to enter
+ * @drv: cpuidle driver
  * @dev: the CPU
  */
-static int ladder_select_state(struct cpuidle_device *dev)
+static int ladder_select_state(struct cpuidle_driver *drv,
+				struct cpuidle_device *dev)
 {
 	struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
 	struct ladder_device_state *last_state;
@@ -77,15 +79,17 @@
 
 	last_state = &ldev->states[last_idx];
 
-	if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
-		last_residency = cpuidle_get_last_residency(dev) - dev->states[last_idx].exit_latency;
+	if (drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) {
+		last_residency = cpuidle_get_last_residency(dev) - \
+					 drv->states[last_idx].exit_latency;
+	}
 	else
 		last_residency = last_state->threshold.promotion_time + 1;
 
 	/* consider promotion */
-	if (last_idx < dev->state_count - 1 &&
+	if (last_idx < drv->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
-	    dev->states[last_idx + 1].exit_latency <= latency_req) {
+	    drv->states[last_idx + 1].exit_latency <= latency_req) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
@@ -96,11 +100,11 @@
 
 	/* consider demotion */
 	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
-	    dev->states[last_idx].exit_latency > latency_req) {
+	    drv->states[last_idx].exit_latency > latency_req) {
 		int i;
 
 		for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
-			if (dev->states[i].exit_latency <= latency_req)
+			if (drv->states[i].exit_latency <= latency_req)
 				break;
 		}
 		ladder_do_selection(ldev, last_idx, i);
@@ -123,9 +127,11 @@
 
 /**
  * ladder_enable_device - setup for the governor
+ * @drv: cpuidle driver
  * @dev: the CPU
  */
-static int ladder_enable_device(struct cpuidle_device *dev)
+static int ladder_enable_device(struct cpuidle_driver *drv,
+				struct cpuidle_device *dev)
 {
 	int i;
 	struct ladder_device *ldev = &per_cpu(ladder_devices, dev->cpu);
@@ -134,8 +140,8 @@
 
 	ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
-	for (i = 0; i < dev->state_count; i++) {
-		state = &dev->states[i];
+	for (i = 0; i < drv->state_count; i++) {
+		state = &drv->states[i];
 		lstate = &ldev->states[i];
 
 		lstate->stats.promotion_count = 0;
@@ -144,7 +150,7 @@
 		lstate->threshold.promotion_count = PROMOTION_COUNT;
 		lstate->threshold.demotion_count = DEMOTION_COUNT;
 
-		if (i < dev->state_count - 1)
+		if (i < drv->state_count - 1)
 			lstate->threshold.promotion_time = state->exit_latency;
 		if (i > 0)
 			lstate->threshold.demotion_time = state->exit_latency;
@@ -153,11 +159,24 @@
 	return 0;
 }
 
+/**
+ * ladder_reflect - update the correct last_state_idx
+ * @dev: the CPU
+ * @index: the index of actual state entered
+ */
+static void ladder_reflect(struct cpuidle_device *dev, int index)
+{
+	struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
+	if (index > 0)
+		ldev->last_state_idx = index;
+}
+
 static struct cpuidle_governor ladder_governor = {
 	.name =		"ladder",
 	.rating =	10,
 	.enable =	ladder_enable_device,
 	.select =	ladder_select_state,
+	.reflect =	ladder_reflect,
 	.owner =	THIS_MODULE,
 };
 
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 3600f19..ad09526 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -19,6 +19,7 @@
 #include <linux/tick.h>
 #include <linux/sched.h>
 #include <linux/math64.h>
+#include <linux/module.h>
 
 #define BUCKETS 12
 #define INTERVALS 8
@@ -182,7 +183,7 @@
 
 static DEFINE_PER_CPU(struct menu_device, menu_devices);
 
-static void menu_update(struct cpuidle_device *dev);
+static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev);
 
 /* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */
 static u64 div_round64(u64 dividend, u32 divisor)
@@ -228,9 +229,10 @@
 
 /**
  * menu_select - selects the next idle state to enter
+ * @drv: cpuidle driver containing state data
  * @dev: the CPU
  */
-static int menu_select(struct cpuidle_device *dev)
+static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
@@ -240,7 +242,7 @@
 	struct timespec t;
 
 	if (data->needs_update) {
-		menu_update(dev);
+		menu_update(drv, dev);
 		data->needs_update = 0;
 	}
 
@@ -285,11 +287,9 @@
 	 * Find the idle state with the lowest power while satisfying
 	 * our constraints.
 	 */
-	for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) {
-		struct cpuidle_state *s = &dev->states[i];
+	for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
+		struct cpuidle_state *s = &drv->states[i];
 
-		if (s->flags & CPUIDLE_FLAG_IGNORE)
-			continue;
 		if (s->target_residency > data->predicted_us)
 			continue;
 		if (s->exit_latency > latency_req)
@@ -310,26 +310,30 @@
 /**
  * menu_reflect - records that data structures need update
  * @dev: the CPU
+ * @index: the index of actual entered state
  *
  * NOTE: it's important to be fast here because this operation will add to
  *       the overall exit latency.
  */
-static void menu_reflect(struct cpuidle_device *dev)
+static void menu_reflect(struct cpuidle_device *dev, int index)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
-	data->needs_update = 1;
+	data->last_state_idx = index;
+	if (index >= 0)
+		data->needs_update = 1;
 }
 
 /**
  * menu_update - attempts to guess what happened after entry
+ * @drv: cpuidle driver containing state data
  * @dev: the CPU
  */
-static void menu_update(struct cpuidle_device *dev)
+static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int last_idx = data->last_state_idx;
 	unsigned int last_idle_us = cpuidle_get_last_residency(dev);
-	struct cpuidle_state *target = &dev->states[last_idx];
+	struct cpuidle_state *target = &drv->states[last_idx];
 	unsigned int measured_us;
 	u64 new_factor;
 
@@ -383,9 +387,11 @@
 
 /**
  * menu_enable_device - scans a CPU's states and does setup
+ * @drv: cpuidle driver
  * @dev: the CPU
  */
-static int menu_enable_device(struct cpuidle_device *dev)
+static int menu_enable_device(struct cpuidle_driver *drv,
+				struct cpuidle_device *dev)
 {
 	struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index be7917ec..1e756e1 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -216,7 +216,8 @@
 
 struct cpuidle_state_attr {
 	struct attribute attr;
-	ssize_t (*show)(struct cpuidle_state *, char *);
+	ssize_t (*show)(struct cpuidle_state *, \
+					struct cpuidle_state_usage *, char *);
 	ssize_t (*store)(struct cpuidle_state *, const char *, size_t);
 };
 
@@ -224,19 +225,22 @@
 static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL)
 
 #define define_show_state_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+			 struct cpuidle_state_usage *state_usage, char *buf) \
 { \
 	return sprintf(buf, "%u\n", state->_name);\
 }
 
 #define define_show_state_ull_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+			struct cpuidle_state_usage *state_usage, char *buf) \
 { \
-	return sprintf(buf, "%llu\n", state->_name);\
+	return sprintf(buf, "%llu\n", state_usage->_name);\
 }
 
 #define define_show_state_str_function(_name) \
-static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, \
+			struct cpuidle_state_usage *state_usage, char *buf) \
 { \
 	if (state->_name[0] == '\0')\
 		return sprintf(buf, "<null>\n");\
@@ -269,16 +273,18 @@
 
 #define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
 #define kobj_to_state(k) (kobj_to_state_obj(k)->state)
+#define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
 #define attr_to_stateattr(a) container_of(a, struct cpuidle_state_attr, attr)
 static ssize_t cpuidle_state_show(struct kobject * kobj,
 	struct attribute * attr ,char * buf)
 {
 	int ret = -EIO;
 	struct cpuidle_state *state = kobj_to_state(kobj);
+	struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj);
 	struct cpuidle_state_attr * cattr = attr_to_stateattr(attr);
 
 	if (cattr->show)
-		ret = cattr->show(state, buf);
+		ret = cattr->show(state, state_usage, buf);
 
 	return ret;
 }
@@ -316,13 +322,15 @@
 {
 	int i, ret = -ENOMEM;
 	struct cpuidle_state_kobj *kobj;
+	struct cpuidle_driver *drv = cpuidle_get_driver();
 
 	/* state statistics */
 	for (i = 0; i < device->state_count; i++) {
 		kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
 		if (!kobj)
 			goto error_state;
-		kobj->state = &device->states[i];
+		kobj->state = &drv->states[i];
+		kobj->state_usage = &device->states_usage[i];
 		init_completion(&kobj->kobj_unregister);
 
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj,
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
index 3cf303e..dcd8bab 100644
--- a/drivers/crypto/mv_cesa.c
+++ b/drivers/crypto/mv_cesa.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <crypto/internal/hash.h>
 #include <crypto/sha.h>
 
@@ -342,11 +343,13 @@
 		else
 			op.config |= CFG_MID_FRAG;
 
-		writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
-		writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
-		writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
-		writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
-		writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
+		if (first_block) {
+			writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
+			writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
+			writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
+			writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
+			writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
+		}
 	}
 
 	memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config));
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 25ec0bb..bc6f5fa 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -28,6 +28,7 @@
 #include <linux/device.h>
 #include <linux/dca.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DCA_VERSION "1.12.1"
 
diff --git a/drivers/dca/dca-sysfs.c b/drivers/dca/dca-sysfs.c
index 5e8f335..591b659 100644
--- a/drivers/dca/dca-sysfs.c
+++ b/drivers/dca/dca-sysfs.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/dca.h>
 #include <linux/gfp.h>
+#include <linux/export.h>
 
 static struct class *dca_class;
 static struct idr dca_idr;
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 643b055..8f04910 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -1,36 +1,29 @@
-config ARCH_HAS_DEVFREQ
-	bool
-	depends on ARCH_HAS_OPP
-	help
-	  Denotes that the architecture supports DEVFREQ. If the architecture
-	  supports multiple OPP entries per device and the frequency of the
-	  devices with OPPs may be altered dynamically, the architecture
-	  supports DEVFREQ.
-
 menuconfig PM_DEVFREQ
 	bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
-	depends on PM_OPP && ARCH_HAS_DEVFREQ
 	help
-	  With OPP support, a device may have a list of frequencies and
-	  voltages available. DEVFREQ, a generic DVFS framework can be
-	  registered for a device with OPP support in order to let the
-	  governor provided to DEVFREQ choose an operating frequency
-	  based on the OPP's list and the policy given with DEVFREQ.
+	  A device may have a list of frequencies and voltages available.
+	  devfreq, a generic DVFS framework can be registered for a device
+	  in order to let the governor provided to devfreq choose an
+	  operating frequency based on the device driver's policy.
 
-	  Each device may have its own governor and policy. DEVFREQ can
+	  Each device may have its own governor and policy. Devfreq can
 	  reevaluate the device state periodically and/or based on the
-	  OPP list changes (each frequency/voltage pair in OPP may be
-	  disabled or enabled).
+	  notification to "nb", a notifier block, of devfreq.
 
-	  Like some CPUs with CPUFREQ, a device may have multiple clocks.
+	  Like some CPUs with CPUfreq, a device may have multiple clocks.
 	  However, because the clock frequencies of a single device are
-	  determined by the single device's state, an instance of DEVFREQ
+	  determined by the single device's state, an instance of devfreq
 	  is attached to a single device and returns a "representative"
-	  clock frequency from the OPP of the device, which is also attached
-	  to a device by 1-to-1. The device registering DEVFREQ takes the
-	  responsiblity to "interpret" the frequency listed in OPP and
+	  clock frequency of the device, which is also attached
+	  to a device by 1-to-1. The device registering devfreq takes the
+	  responsiblity to "interpret" the representative frequency and
 	  to set its every clock accordingly with the "target" callback
-	  given to DEVFREQ.
+	  given to devfreq.
+
+	  When OPP is used with the devfreq device, it is recommended to
+	  register devfreq's nb to the OPP's notifier head.  If OPP is
+	  used with the devfreq device, you may use OPP helper
+	  functions defined in devfreq.h.
 
 if PM_DEVFREQ
 
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 5d15b81..59d24e9 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -15,7 +15,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/opp.h>
 #include <linux/devfreq.h>
 #include <linux/workqueue.h>
@@ -416,10 +418,14 @@
  */
 int devfreq_remove_device(struct devfreq *devfreq)
 {
+	bool central_polling;
+
 	if (!devfreq)
 		return -EINVAL;
 
-	if (!devfreq->governor->no_central_polling) {
+	central_polling = !devfreq->governor->no_central_polling;
+
+	if (central_polling) {
 		mutex_lock(&devfreq_list_lock);
 		while (wait_remove_device == devfreq) {
 			mutex_unlock(&devfreq_list_lock);
@@ -431,7 +437,7 @@
 	mutex_lock(&devfreq->lock);
 	_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
 
-	if (!devfreq->governor->no_central_polling)
+	if (central_polling)
 		mutex_unlock(&devfreq_list_lock);
 
 	return 0;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 2e3b3d3..ab8f469 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -193,7 +193,8 @@
 config PL330_DMA
 	tristate "DMA API Driver for PL330"
 	select DMA_ENGINE
-	depends on PL330
+	depends on ARM_AMBA
+	select PL330
 	help
 	  Select if your platform has one or more PL330 DMACs.
 	  You need to provide platform specific settings via
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index be21e3f..b7cbd1a 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -66,32 +66,29 @@
  *    after the final transfer signalled by LBREQ or LSREQ.  The DMAC
  *    will then move to the next LLI entry.
  *
- * Only the former works sanely with scatter lists, so we only implement
- * the DMAC flow control method.  However, peripherals which use the LBREQ
- * and LSREQ signals (eg, MMCI) are unable to use this mode, which through
- * these hardware restrictions prevents them from using scatter DMA.
- *
  * Global TODO:
  * - Break out common code from arch/arm/mach-s3c64xx and share
  */
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/dmaengine.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl08x.h>
 #include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
-
+#include <linux/slab.h>
 #include <asm/hardware/pl080.h>
 
 #define DRIVER_NAME	"pl08xdmac"
 
+static struct amba_driver pl08x_amba_driver;
+
 /**
  * struct vendor_data - vendor-specific config parameters for PL08x derivatives
  * @channels: the number of channels available in this variant
@@ -126,7 +123,8 @@
  * @phy_chans: array of data for the physical channels
  * @pool: a pool for the LLI descriptors
  * @pool_ctr: counter of LLIs in the pool
- * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
+ * fetches
  * @mem_buses: set to indicate memory transfers on AHB2.
  * @lock: a spinlock for this struct
  */
@@ -149,14 +147,6 @@
  * PL08X specific defines
  */
 
-/*
- * Memory boundaries: the manual for PL08x says that the controller
- * cannot read past a 1KiB boundary, so these defines are used to
- * create transfer LLIs that do not cross such boundaries.
- */
-#define PL08X_BOUNDARY_SHIFT		(10)	/* 1KB 0x400 */
-#define PL08X_BOUNDARY_SIZE		(1 << PL08X_BOUNDARY_SHIFT)
-
 /* Size (bytes) of each LLI buffer allocated for one transfer */
 # define PL08X_LLI_TSFR_SIZE	0x2000
 
@@ -272,7 +262,6 @@
 	writel(val, ch->base + PL080_CH_CONFIG);
 }
 
-
 /*
  * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
  * clears any pending interrupt status.  This should not be used for
@@ -363,7 +352,9 @@
 	if (!list_empty(&plchan->pend_list)) {
 		struct pl08x_txd *txdi;
 		list_for_each_entry(txdi, &plchan->pend_list, node) {
-			bytes += txdi->len;
+			struct pl08x_sg *dsg;
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				bytes += dsg->len;
 		}
 	}
 
@@ -407,6 +398,7 @@
 		return NULL;
 	}
 
+	pm_runtime_get_sync(&pl08x->adev->dev);
 	return ch;
 }
 
@@ -420,6 +412,8 @@
 	/* Stop the channel and clear its interrupts */
 	pl08x_terminate_phy_chan(pl08x, ch);
 
+	pm_runtime_put(&pl08x->adev->dev);
+
 	/* Mark it as free */
 	ch->serving = NULL;
 	spin_unlock_irqrestore(&ch->lock, flags);
@@ -499,36 +493,30 @@
 };
 
 /*
- * Autoselect a master bus to use for the transfer this prefers the
- * destination bus if both available if fixed address on one bus the
- * other will be chosen
+ * Autoselect a master bus to use for the transfer. Slave will be the chosen as
+ * victim in case src & dest are not similarly aligned. i.e. If after aligning
+ * masters address with width requirements of transfer (by sending few byte by
+ * byte data), slave is still not aligned, then its width will be reduced to
+ * BYTE.
+ * - prefers the destination bus if both available
+ * - prefers bus with fixed address (i.e. peripheral)
  */
 static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
 	struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
 {
 	if (!(cctl & PL080_CONTROL_DST_INCR)) {
-		*mbus = &bd->srcbus;
-		*sbus = &bd->dstbus;
-	} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
 		*mbus = &bd->dstbus;
 		*sbus = &bd->srcbus;
+	} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+		*mbus = &bd->srcbus;
+		*sbus = &bd->dstbus;
 	} else {
-		if (bd->dstbus.buswidth == 4) {
+		if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
 			*mbus = &bd->dstbus;
 			*sbus = &bd->srcbus;
-		} else if (bd->srcbus.buswidth == 4) {
-			*mbus = &bd->srcbus;
-			*sbus = &bd->dstbus;
-		} else if (bd->dstbus.buswidth == 2) {
-			*mbus = &bd->dstbus;
-			*sbus = &bd->srcbus;
-		} else if (bd->srcbus.buswidth == 2) {
-			*mbus = &bd->srcbus;
-			*sbus = &bd->dstbus;
 		} else {
-			/* bd->srcbus.buswidth == 1 */
-			*mbus = &bd->dstbus;
-			*sbus = &bd->srcbus;
+			*mbus = &bd->srcbus;
+			*sbus = &bd->dstbus;
 		}
 	}
 }
@@ -547,7 +535,8 @@
 	llis_va[num_llis].cctl = cctl;
 	llis_va[num_llis].src = bd->srcbus.addr;
 	llis_va[num_llis].dst = bd->dstbus.addr;
-	llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+	llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
+		sizeof(struct pl08x_lli);
 	llis_va[num_llis].lli |= bd->lli_bus;
 
 	if (cctl & PL080_CONTROL_SRC_INCR)
@@ -560,16 +549,12 @@
 	bd->remainder -= len;
 }
 
-/*
- * Return number of bytes to fill to boundary, or len.
- * This calculation works for any value of addr.
- */
-static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
+static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
+		u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
 {
-	size_t boundary_len = PL08X_BOUNDARY_SIZE -
-			(addr & (PL08X_BOUNDARY_SIZE - 1));
-
-	return min(boundary_len, len);
+	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+	pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+	(*total_bytes) += len;
 }
 
 /*
@@ -583,13 +568,12 @@
 	struct pl08x_bus_data *mbus, *sbus;
 	struct pl08x_lli_build_data bd;
 	int num_llis = 0;
-	u32 cctl;
-	size_t max_bytes_per_lli;
-	size_t total_bytes = 0;
+	u32 cctl, early_bytes = 0;
+	size_t max_bytes_per_lli, total_bytes;
 	struct pl08x_lli *llis_va;
+	struct pl08x_sg *dsg;
 
-	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
-				      &txd->llis_bus);
+	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
 	if (!txd->llis_va) {
 		dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
 		return 0;
@@ -597,13 +581,9 @@
 
 	pl08x->pool_ctr++;
 
-	/* Get the default CCTL */
-	cctl = txd->cctl;
-
 	bd.txd = txd;
-	bd.srcbus.addr = txd->src_addr;
-	bd.dstbus.addr = txd->dst_addr;
 	bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
+	cctl = txd->cctl;
 
 	/* Find maximum width of the source bus */
 	bd.srcbus.maxwidth =
@@ -615,215 +595,179 @@
 		pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
 				       PL080_CONTROL_DWIDTH_SHIFT);
 
-	/* Set up the bus widths to the maximum */
-	bd.srcbus.buswidth = bd.srcbus.maxwidth;
-	bd.dstbus.buswidth = bd.dstbus.maxwidth;
+	list_for_each_entry(dsg, &txd->dsg_list, node) {
+		total_bytes = 0;
+		cctl = txd->cctl;
 
-	/*
-	 * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
-	 */
-	max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
-		PL080_CONTROL_TRANSFER_SIZE_MASK;
+		bd.srcbus.addr = dsg->src_addr;
+		bd.dstbus.addr = dsg->dst_addr;
+		bd.remainder = dsg->len;
+		bd.srcbus.buswidth = bd.srcbus.maxwidth;
+		bd.dstbus.buswidth = bd.dstbus.maxwidth;
 
-	/* We need to count this down to zero */
-	bd.remainder = txd->len;
+		pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
-	/*
-	 * Choose bus to align to
-	 * - prefers destination bus if both available
-	 * - if fixed address on one bus chooses other
-	 */
-	pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
-
-	dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
-		 bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
-		 bd.srcbus.buswidth,
-		 bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
-		 bd.dstbus.buswidth,
-		 bd.remainder, max_bytes_per_lli);
-	dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
-		 mbus == &bd.srcbus ? "src" : "dst",
-		 sbus == &bd.srcbus ? "src" : "dst");
-
-	if (txd->len < mbus->buswidth) {
-		/* Less than a bus width available - send as single bytes */
-		while (bd.remainder) {
-			dev_vdbg(&pl08x->adev->dev,
-				 "%s single byte LLIs for a transfer of "
-				 "less than a bus width (remain 0x%08x)\n",
-				 __func__, bd.remainder);
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
-		}
-	} else {
-		/* Make one byte LLIs until master bus is aligned */
-		while ((mbus->addr) % (mbus->buswidth)) {
-			dev_vdbg(&pl08x->adev->dev,
-				"%s adjustment lli for less than bus width "
-				 "(remain 0x%08x)\n",
-				 __func__, bd.remainder);
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
-		}
+		dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
+			bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+			bd.srcbus.buswidth,
+			bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+			bd.dstbus.buswidth,
+			bd.remainder);
+		dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
+			mbus == &bd.srcbus ? "src" : "dst",
+			sbus == &bd.srcbus ? "src" : "dst");
 
 		/*
-		 * Master now aligned
-		 * - if slave is not then we must set its width down
+		 * Zero length is only allowed if all these requirements are
+		 * met:
+		 * - flow controller is peripheral.
+		 * - src.addr is aligned to src.width
+		 * - dst.addr is aligned to dst.width
+		 *
+		 * sg_len == 1 should be true, as there can be two cases here:
+		 *
+		 * - Memory addresses are contiguous and are not scattered.
+		 *   Here, Only one sg will be passed by user driver, with
+		 *   memory address and zero length. We pass this to controller
+		 *   and after the transfer it will receive the last burst
+		 *   request from peripheral and so transfer finishes.
+		 *
+		 * - Memory addresses are scattered and are not contiguous.
+		 *   Here, Obviously as DMA controller doesn't know when a lli's
+		 *   transfer gets over, it can't load next lli. So in this
+		 *   case, there has to be an assumption that only one lli is
+		 *   supported. Thus, we can't have scattered addresses.
 		 */
-		if (sbus->addr % sbus->buswidth) {
-			dev_dbg(&pl08x->adev->dev,
-				"%s set down bus width to one byte\n",
-				 __func__);
-
-			sbus->buswidth = 1;
-		}
-
-		/*
-		 * Make largest possible LLIs until less than one bus
-		 * width left
-		 */
-		while (bd.remainder > (mbus->buswidth - 1)) {
-			size_t lli_len, target_len, tsize, odd_bytes;
-
-			/*
-			 * If enough left try to send max possible,
-			 * otherwise try to send the remainder
-			 */
-			target_len = min(bd.remainder, max_bytes_per_lli);
-
-			/*
-			 * Set bus lengths for incrementing buses to the
-			 * number of bytes which fill to next memory boundary,
-			 * limiting on the target length calculated above.
-			 */
-			if (cctl & PL080_CONTROL_SRC_INCR)
-				bd.srcbus.fill_bytes =
-					pl08x_pre_boundary(bd.srcbus.addr,
-						target_len);
-			else
-				bd.srcbus.fill_bytes = target_len;
-
-			if (cctl & PL080_CONTROL_DST_INCR)
-				bd.dstbus.fill_bytes =
-					pl08x_pre_boundary(bd.dstbus.addr,
-						target_len);
-			else
-				bd.dstbus.fill_bytes = target_len;
-
-			/* Find the nearest */
-			lli_len	= min(bd.srcbus.fill_bytes,
-				      bd.dstbus.fill_bytes);
-
-			BUG_ON(lli_len > bd.remainder);
-
-			if (lli_len <= 0) {
-				dev_err(&pl08x->adev->dev,
-					"%s lli_len is %zu, <= 0\n",
-						__func__, lli_len);
+		if (!bd.remainder) {
+			u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+				PL080_CONFIG_FLOW_CONTROL_SHIFT;
+			if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
+					(fc <= PL080_FLOW_SRC2DST_SRC))) {
+				dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
+					__func__);
 				return 0;
 			}
 
-			if (lli_len == target_len) {
-				/*
-				 * Can send what we wanted.
-				 * Maintain alignment
-				 */
-				lli_len	= (lli_len/mbus->buswidth) *
-							mbus->buswidth;
-				odd_bytes = 0;
-			} else {
-				/*
-				 * So now we know how many bytes to transfer
-				 * to get to the nearest boundary.  The next
-				 * LLI will past the boundary.  However, we
-				 * may be working to a boundary on the slave
-				 * bus.  We need to ensure the master stays
-				 * aligned, and that we are working in
-				 * multiples of the bus widths.
-				 */
-				odd_bytes = lli_len % mbus->buswidth;
-				lli_len -= odd_bytes;
-
+			if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
+					(bd.srcbus.addr % bd.srcbus.buswidth)) {
+				dev_err(&pl08x->adev->dev,
+					"%s src & dst address must be aligned to src"
+					" & dst width if peripheral is flow controller",
+					__func__);
+				return 0;
 			}
 
-			if (lli_len) {
-				/*
-				 * Check against minimum bus alignment:
-				 * Calculate actual transfer size in relation
-				 * to bus width an get a maximum remainder of
-				 * the smallest bus width - 1
-				 */
-				/* FIXME: use round_down()? */
-				tsize = lli_len / min(mbus->buswidth,
-						      sbus->buswidth);
-				lli_len	= tsize * min(mbus->buswidth,
-						      sbus->buswidth);
-
-				if (target_len != lli_len) {
-					dev_vdbg(&pl08x->adev->dev,
-					"%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
-					__func__, target_len, lli_len, txd->len);
-				}
-
-				cctl = pl08x_cctl_bits(cctl,
-						       bd.srcbus.buswidth,
-						       bd.dstbus.buswidth,
-						       tsize);
-
-				dev_vdbg(&pl08x->adev->dev,
-					"%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
-					__func__, lli_len, bd.remainder);
-				pl08x_fill_lli_for_desc(&bd, num_llis++,
-					lli_len, cctl);
-				total_bytes += lli_len;
-			}
-
-
-			if (odd_bytes) {
-				/*
-				 * Creep past the boundary, maintaining
-				 * master alignment
-				 */
-				int j;
-				for (j = 0; (j < mbus->buswidth)
-						&& (bd.remainder); j++) {
-					cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-					dev_vdbg(&pl08x->adev->dev,
-						"%s align with boundary, single byte (remain 0x%08zx)\n",
-						__func__, bd.remainder);
-					pl08x_fill_lli_for_desc(&bd,
-						num_llis++, 1, cctl);
-					total_bytes++;
-				}
-			}
+			cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+					bd.dstbus.buswidth, 0);
+			pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+			break;
 		}
 
 		/*
-		 * Send any odd bytes
+		 * Send byte by byte for following cases
+		 * - Less than a bus width available
+		 * - until master bus is aligned
 		 */
-		while (bd.remainder) {
-			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
-			dev_vdbg(&pl08x->adev->dev,
-				"%s align with boundary, single odd byte (remain %zu)\n",
-				__func__, bd.remainder);
-			pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
-			total_bytes++;
+		if (bd.remainder < mbus->buswidth)
+			early_bytes = bd.remainder;
+		else if ((mbus->addr) % (mbus->buswidth)) {
+			early_bytes = mbus->buswidth - (mbus->addr) %
+				(mbus->buswidth);
+			if ((bd.remainder - early_bytes) < mbus->buswidth)
+				early_bytes = bd.remainder;
 		}
-	}
-	if (total_bytes != txd->len) {
-		dev_err(&pl08x->adev->dev,
-			"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
-			__func__, total_bytes, txd->len);
-		return 0;
-	}
 
-	if (num_llis >= MAX_NUM_TSFR_LLIS) {
-		dev_err(&pl08x->adev->dev,
-			"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
-			__func__, (u32) MAX_NUM_TSFR_LLIS);
-		return 0;
+		if (early_bytes) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%s byte width LLIs (remain 0x%08x)\n",
+				__func__, bd.remainder);
+			prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
+				&total_bytes);
+		}
+
+		if (bd.remainder) {
+			/*
+			 * Master now aligned
+			 * - if slave is not then we must set its width down
+			 */
+			if (sbus->addr % sbus->buswidth) {
+				dev_dbg(&pl08x->adev->dev,
+					"%s set down bus width to one byte\n",
+					__func__);
+
+				sbus->buswidth = 1;
+			}
+
+			/*
+			 * Bytes transferred = tsize * src width, not
+			 * MIN(buswidths)
+			 */
+			max_bytes_per_lli = bd.srcbus.buswidth *
+				PL080_CONTROL_TRANSFER_SIZE_MASK;
+			dev_vdbg(&pl08x->adev->dev,
+				"%s max bytes per lli = %zu\n",
+				__func__, max_bytes_per_lli);
+
+			/*
+			 * Make largest possible LLIs until less than one bus
+			 * width left
+			 */
+			while (bd.remainder > (mbus->buswidth - 1)) {
+				size_t lli_len, tsize, width;
+
+				/*
+				 * If enough left try to send max possible,
+				 * otherwise try to send the remainder
+				 */
+				lli_len = min(bd.remainder, max_bytes_per_lli);
+
+				/*
+				 * Check against maximum bus alignment:
+				 * Calculate actual transfer size in relation to
+				 * bus width an get a maximum remainder of the
+				 * highest bus width - 1
+				 */
+				width = max(mbus->buswidth, sbus->buswidth);
+				lli_len = (lli_len / width) * width;
+				tsize = lli_len / bd.srcbus.buswidth;
+
+				dev_vdbg(&pl08x->adev->dev,
+					"%s fill lli with single lli chunk of "
+					"size 0x%08zx (remainder 0x%08zx)\n",
+					__func__, lli_len, bd.remainder);
+
+				cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+					bd.dstbus.buswidth, tsize);
+				pl08x_fill_lli_for_desc(&bd, num_llis++,
+						lli_len, cctl);
+				total_bytes += lli_len;
+			}
+
+			/*
+			 * Send any odd bytes
+			 */
+			if (bd.remainder) {
+				dev_vdbg(&pl08x->adev->dev,
+					"%s align with boundary, send odd bytes (remain %zu)\n",
+					__func__, bd.remainder);
+				prep_byte_width_lli(&bd, &cctl, bd.remainder,
+						num_llis++, &total_bytes);
+			}
+		}
+
+		if (total_bytes != dsg->len) {
+			dev_err(&pl08x->adev->dev,
+				"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
+				__func__, total_bytes, dsg->len);
+			return 0;
+		}
+
+		if (num_llis >= MAX_NUM_TSFR_LLIS) {
+			dev_err(&pl08x->adev->dev,
+				"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
+				__func__, (u32) MAX_NUM_TSFR_LLIS);
+			return 0;
+		}
 	}
 
 	llis_va = txd->llis_va;
@@ -856,11 +800,19 @@
 static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
 			   struct pl08x_txd *txd)
 {
+	struct pl08x_sg *dsg, *_dsg;
+
 	/* Free the LLI */
-	dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
+	if (txd->llis_va)
+		dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
 
 	pl08x->pool_ctr--;
 
+	list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+		list_del(&dsg->node);
+		kfree(dsg);
+	}
+
 	kfree(txd);
 }
 
@@ -917,9 +869,7 @@
 	 * need, but for slaves the physical signals may be muxed!
 	 * Can the platform allow us to use this channel?
 	 */
-	if (plchan->slave &&
-	    ch->signal < 0 &&
-	    pl08x->pd->get_signal) {
+	if (plchan->slave && pl08x->pd->get_signal) {
 		ret = pl08x->pd->get_signal(plchan);
 		if (ret < 0) {
 			dev_dbg(&pl08x->adev->dev,
@@ -1008,10 +958,8 @@
  * If slaves are relying on interrupts to signal completion this function
  * must not be called with interrupts disabled.
  */
-static enum dma_status
-pl08x_dma_tx_status(struct dma_chan *chan,
-		    dma_cookie_t cookie,
-		    struct dma_tx_state *txstate)
+static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	dma_cookie_t last_used;
@@ -1253,7 +1201,9 @@
 
 	num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
 	if (!num_llis) {
-		kfree(txd);
+		spin_lock_irqsave(&plchan->lock, flags);
+		pl08x_free_txd(pl08x, txd);
+		spin_unlock_irqrestore(&plchan->lock, flags);
 		return -EINVAL;
 	}
 
@@ -1301,13 +1251,14 @@
 static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
 	unsigned long flags)
 {
-	struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+	struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
 
 	if (txd) {
 		dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
 		txd->tx.flags = flags;
 		txd->tx.tx_submit = pl08x_tx_submit;
 		INIT_LIST_HEAD(&txd->node);
+		INIT_LIST_HEAD(&txd->dsg_list);
 
 		/* Always enable error and terminal interrupts */
 		txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
@@ -1326,6 +1277,7 @@
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
 	struct pl08x_txd *txd;
+	struct pl08x_sg *dsg;
 	int ret;
 
 	txd = pl08x_get_txd(plchan, flags);
@@ -1335,10 +1287,19 @@
 		return NULL;
 	}
 
+	dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+	if (!dsg) {
+		pl08x_free_txd(pl08x, txd);
+		dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n",
+				__func__);
+		return NULL;
+	}
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
 	txd->direction = DMA_NONE;
-	txd->src_addr = src;
-	txd->dst_addr = dest;
-	txd->len = len;
+	dsg->src_addr = src;
+	dsg->dst_addr = dest;
+	dsg->len = len;
 
 	/* Set platform data for m2m */
 	txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
@@ -1367,19 +1328,13 @@
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
 	struct pl08x_txd *txd;
-	int ret;
-
-	/*
-	 * Current implementation ASSUMES only one sg
-	 */
-	if (sg_len != 1) {
-		dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n",
-			__func__);
-		BUG();
-	}
+	struct pl08x_sg *dsg;
+	struct scatterlist *sg;
+	dma_addr_t slave_addr;
+	int ret, tmp;
 
 	dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
-		__func__, sgl->length, plchan->name);
+			__func__, sgl->length, plchan->name);
 
 	txd = pl08x_get_txd(plchan, flags);
 	if (!txd) {
@@ -1398,24 +1353,49 @@
 	 * channel target address dynamically at runtime.
 	 */
 	txd->direction = direction;
-	txd->len = sgl->length;
 
 	if (direction == DMA_TO_DEVICE) {
-		txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		txd->cctl = plchan->dst_cctl;
-		txd->src_addr = sgl->dma_address;
-		txd->dst_addr = plchan->dst_addr;
+		slave_addr = plchan->dst_addr;
 	} else if (direction == DMA_FROM_DEVICE) {
-		txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		txd->cctl = plchan->src_cctl;
-		txd->src_addr = plchan->src_addr;
-		txd->dst_addr = sgl->dma_address;
+		slave_addr = plchan->src_addr;
 	} else {
+		pl08x_free_txd(pl08x, txd);
 		dev_err(&pl08x->adev->dev,
 			"%s direction unsupported\n", __func__);
 		return NULL;
 	}
 
+	if (plchan->cd->device_fc)
+		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+			PL080_FLOW_PER2MEM_PER;
+	else
+		tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+			PL080_FLOW_PER2MEM;
+
+	txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+
+	for_each_sg(sgl, sg, sg_len, tmp) {
+		dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+		if (!dsg) {
+			pl08x_free_txd(pl08x, txd);
+			dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
+					__func__);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = sg_dma_len(sg);
+		if (direction == DMA_TO_DEVICE) {
+			dsg->src_addr = sg_phys(sg);
+			dsg->dst_addr = slave_addr;
+		} else {
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = sg_phys(sg);
+		}
+	}
+
 	ret = pl08x_prep_channel_resources(plchan, txd);
 	if (ret)
 		return NULL;
@@ -1489,9 +1469,15 @@
 
 bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
 {
-	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_dma_chan *plchan;
 	char *name = chan_id;
 
+	/* Reject channels for devices not bound to this driver */
+	if (chan->device->dev->driver != &pl08x_amba_driver.drv)
+		return false;
+
+	plchan = to_pl08x_chan(chan);
+
 	/* Check that the channel is not taken! */
 	if (!strcmp(plchan->name, name))
 		return true;
@@ -1507,34 +1493,34 @@
  */
 static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
 {
-	u32 val;
-
-	val = readl(pl08x->base + PL080_CONFIG);
-	val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
-	/* We implicitly clear bit 1 and that means little-endian mode */
-	val |= PL080_CONFIG_ENABLE;
-	writel(val, pl08x->base + PL080_CONFIG);
+	writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
 }
 
 static void pl08x_unmap_buffers(struct pl08x_txd *txd)
 {
 	struct device *dev = txd->tx.chan->device->dev;
+	struct pl08x_sg *dsg;
 
 	if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
 		if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
-			dma_unmap_single(dev, txd->src_addr, txd->len,
-				DMA_TO_DEVICE);
-		else
-			dma_unmap_page(dev, txd->src_addr, txd->len,
-				DMA_TO_DEVICE);
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		else {
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->src_addr, dsg->len,
+						DMA_TO_DEVICE);
+		}
 	}
 	if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
 		if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
-			dma_unmap_single(dev, txd->dst_addr, txd->len,
-				DMA_FROM_DEVICE);
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_single(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
 		else
-			dma_unmap_page(dev, txd->dst_addr, txd->len,
-				DMA_FROM_DEVICE);
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				dma_unmap_page(dev, dsg->dst_addr, dsg->len,
+						DMA_FROM_DEVICE);
 	}
 }
 
@@ -1589,8 +1575,8 @@
 		 */
 		list_for_each_entry(waiting, &pl08x->memcpy.channels,
 				    chan.device_node) {
-		  if (waiting->state == PL08X_CHAN_WAITING &&
-			    waiting->waiting != NULL) {
+			if (waiting->state == PL08X_CHAN_WAITING &&
+				waiting->waiting != NULL) {
 				int ret;
 
 				/* This should REALLY not fail now */
@@ -1630,38 +1616,40 @@
 static irqreturn_t pl08x_irq(int irq, void *dev)
 {
 	struct pl08x_driver_data *pl08x = dev;
-	u32 mask = 0;
-	u32 val;
-	int i;
+	u32 mask = 0, err, tc, i;
 
-	val = readl(pl08x->base + PL080_ERR_STATUS);
-	if (val) {
-		/* An error interrupt (on one or more channels) */
-		dev_err(&pl08x->adev->dev,
-			"%s error interrupt, register value 0x%08x\n",
-				__func__, val);
-		/*
-		 * Simply clear ALL PL08X error interrupts,
-		 * regardless of channel and cause
-		 * FIXME: should be 0x00000003 on PL081 really.
-		 */
-		writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+	/* check & clear - ERR & TC interrupts */
+	err = readl(pl08x->base + PL080_ERR_STATUS);
+	if (err) {
+		dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
+			__func__, err);
+		writel(err, pl08x->base + PL080_ERR_CLEAR);
 	}
-	val = readl(pl08x->base + PL080_INT_STATUS);
+	tc = readl(pl08x->base + PL080_INT_STATUS);
+	if (tc)
+		writel(tc, pl08x->base + PL080_TC_CLEAR);
+
+	if (!err && !tc)
+		return IRQ_NONE;
+
 	for (i = 0; i < pl08x->vd->channels; i++) {
-		if ((1 << i) & val) {
+		if (((1 << i) & err) || ((1 << i) & tc)) {
 			/* Locate physical channel */
 			struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
 			struct pl08x_dma_chan *plchan = phychan->serving;
 
+			if (!plchan) {
+				dev_err(&pl08x->adev->dev,
+					"%s Error TC interrupt on unused channel: 0x%08x\n",
+					__func__, i);
+				continue;
+			}
+
 			/* Schedule tasklet on this channel */
 			tasklet_schedule(&plchan->tasklet);
-
 			mask |= (1 << i);
 		}
 	}
-	/* Clear only the terminal interrupts on channels we processed */
-	writel(mask, pl08x->base + PL080_TC_CLEAR);
 
 	return mask ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -1685,9 +1673,7 @@
  * Make a local wrapper to hold required data
  */
 static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
-					   struct dma_device *dmadev,
-					   unsigned int channels,
-					   bool slave)
+		struct dma_device *dmadev, unsigned int channels, bool slave)
 {
 	struct pl08x_dma_chan *chan;
 	int i;
@@ -1700,7 +1686,7 @@
 	 * to cope with that situation.
 	 */
 	for (i = 0; i < channels; i++) {
-		chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
+		chan = kzalloc(sizeof(*chan), GFP_KERNEL);
 		if (!chan) {
 			dev_err(&pl08x->adev->dev,
 				"%s no memory for channel\n", __func__);
@@ -1728,7 +1714,7 @@
 			kfree(chan);
 			continue;
 		}
-		dev_info(&pl08x->adev->dev,
+		dev_dbg(&pl08x->adev->dev,
 			 "initialize virtual channel \"%s\"\n",
 			 chan->name);
 
@@ -1837,9 +1823,9 @@
 static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
 {
 	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
-				   NULL, pl08x,
-				   &pl08x_debugfs_operations);
+	(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
+			S_IFREG | S_IRUGO, NULL, pl08x,
+			&pl08x_debugfs_operations);
 }
 
 #else
@@ -1860,12 +1846,15 @@
 		return ret;
 
 	/* Create the driver state holder */
-	pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
+	pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
 	if (!pl08x) {
 		ret = -ENOMEM;
 		goto out_no_pl08x;
 	}
 
+	pm_runtime_set_active(&adev->dev);
+	pm_runtime_enable(&adev->dev);
+
 	/* Initialize memcpy engine */
 	dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
 	pl08x->memcpy.dev = &adev->dev;
@@ -1939,7 +1928,7 @@
 	}
 
 	/* Initialize physical channels */
-	pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
+	pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
 			GFP_KERNEL);
 	if (!pl08x->phy_chans) {
 		dev_err(&adev->dev, "%s failed to allocate "
@@ -1956,9 +1945,8 @@
 		spin_lock_init(&ch->lock);
 		ch->serving = NULL;
 		ch->signal = -1;
-		dev_info(&adev->dev,
-			 "physical channel %d is %s\n", i,
-			 pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+		dev_dbg(&adev->dev, "physical channel %d is %s\n",
+			i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
 	}
 
 	/* Register as many memcpy channels as there are physical channels */
@@ -1974,8 +1962,7 @@
 
 	/* Register slave channels */
 	ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
-					      pl08x->pd->num_slave_channels,
-					      true);
+			pl08x->pd->num_slave_channels, true);
 	if (ret <= 0) {
 		dev_warn(&pl08x->adev->dev,
 			"%s failed to enumerate slave channels - %d\n",
@@ -2005,6 +1992,8 @@
 	dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
 		 amba_part(adev), amba_rev(adev),
 		 (unsigned long long)adev->res.start, adev->irq[0]);
+
+	pm_runtime_put(&adev->dev);
 	return 0;
 
 out_no_slave_reg:
@@ -2023,6 +2012,9 @@
 	dma_pool_destroy(pl08x->pool);
 out_no_lli_pool:
 out_no_platdata:
+	pm_runtime_put(&adev->dev);
+	pm_runtime_disable(&adev->dev);
+
 	kfree(pl08x);
 out_no_pl08x:
 	amba_release_regions(adev);
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6a483ea..fcfa0a8 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -107,10 +107,11 @@
 {
 	struct at_desc *desc, *_desc;
 	struct at_desc *ret = NULL;
+	unsigned long flags;
 	unsigned int i = 0;
 	LIST_HEAD(tmp_list);
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
 		i++;
 		if (async_tx_test_ack(&desc->txd)) {
@@ -121,7 +122,7 @@
 		dev_dbg(chan2dev(&atchan->chan_common),
 				"desc %p not ACKed\n", desc);
 	}
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 	dev_vdbg(chan2dev(&atchan->chan_common),
 		"scanned %u descriptors on freelist\n", i);
 
@@ -129,9 +130,9 @@
 	if (!ret) {
 		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
 		if (ret) {
-			spin_lock_bh(&atchan->lock);
+			spin_lock_irqsave(&atchan->lock, flags);
 			atchan->descs_allocated++;
-			spin_unlock_bh(&atchan->lock);
+			spin_unlock_irqrestore(&atchan->lock, flags);
 		} else {
 			dev_err(chan2dev(&atchan->chan_common),
 					"not enough descriptors available\n");
@@ -150,8 +151,9 @@
 {
 	if (desc) {
 		struct at_desc *child;
+		unsigned long flags;
 
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 		list_for_each_entry(child, &desc->tx_list, desc_node)
 			dev_vdbg(chan2dev(&atchan->chan_common),
 					"moving child desc %p to freelist\n",
@@ -160,7 +162,7 @@
 		dev_vdbg(chan2dev(&atchan->chan_common),
 			 "moving desc %p to freelist\n", desc);
 		list_add(&desc->desc_node, &atchan->free_list);
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	}
 }
 
@@ -299,7 +301,7 @@
 
 	/* for cyclic transfers,
 	 * no need to replay callback function while stopping */
-	if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) {
+	if (!atc_chan_is_cyclic(atchan)) {
 		dma_async_tx_callback	callback = txd->callback;
 		void			*param = txd->callback_param;
 
@@ -471,16 +473,17 @@
 static void atc_tasklet(unsigned long data)
 {
 	struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+	unsigned long flags;
 
-	spin_lock(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
 		atc_handle_error(atchan);
-	else if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+	else if (atc_chan_is_cyclic(atchan))
 		atc_handle_cyclic(atchan);
 	else
 		atc_advance_work(atchan);
 
-	spin_unlock(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
@@ -539,8 +542,9 @@
 	struct at_desc		*desc = txd_to_at_desc(tx);
 	struct at_dma_chan	*atchan = to_at_dma_chan(tx->chan);
 	dma_cookie_t		cookie;
+	unsigned long		flags;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	cookie = atc_assign_cookie(atchan, desc);
 
 	if (list_empty(&atchan->active_list)) {
@@ -554,7 +558,7 @@
 		list_add_tail(&desc->desc_node, &atchan->queue);
 	}
 
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	return cookie;
 }
@@ -927,28 +931,29 @@
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
 	struct at_dma		*atdma = to_at_dma(chan->device);
 	int			chan_id = atchan->chan_common.chan_id;
+	unsigned long		flags;
 
 	LIST_HEAD(list);
 
 	dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
 
 	if (cmd == DMA_PAUSE) {
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
 		set_bit(ATC_IS_PAUSED, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else if (cmd == DMA_RESUME) {
-		if (!test_bit(ATC_IS_PAUSED, &atchan->status))
+		if (!atc_chan_is_paused(atchan))
 			return 0;
 
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
 		clear_bit(ATC_IS_PAUSED, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else if (cmd == DMA_TERMINATE_ALL) {
 		struct at_desc	*desc, *_desc;
 		/*
@@ -957,7 +962,7 @@
 		 * channel. We still have to poll the channel enable bit due
 		 * to AHB/HSB limitations.
 		 */
-		spin_lock_bh(&atchan->lock);
+		spin_lock_irqsave(&atchan->lock, flags);
 
 		/* disabling channel: must also remove suspend state */
 		dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
@@ -978,7 +983,7 @@
 		/* if channel dedicated to cyclic operations, free it */
 		clear_bit(ATC_IS_CYCLIC, &atchan->status);
 
-		spin_unlock_bh(&atchan->lock);
+		spin_unlock_irqrestore(&atchan->lock, flags);
 	} else {
 		return -ENXIO;
 	}
@@ -1004,9 +1009,10 @@
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
 	dma_cookie_t		last_used;
 	dma_cookie_t		last_complete;
+	unsigned long		flags;
 	enum dma_status		ret;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 
 	last_complete = atchan->completed_cookie;
 	last_used = chan->cookie;
@@ -1021,7 +1027,7 @@
 		ret = dma_async_is_complete(cookie, last_complete, last_used);
 	}
 
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	if (ret != DMA_SUCCESS)
 		dma_set_tx_state(txstate, last_complete, last_used,
@@ -1029,7 +1035,7 @@
 	else
 		dma_set_tx_state(txstate, last_complete, last_used, 0);
 
-	if (test_bit(ATC_IS_PAUSED, &atchan->status))
+	if (atc_chan_is_paused(atchan))
 		ret = DMA_PAUSED;
 
 	dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n",
@@ -1046,18 +1052,19 @@
 static void atc_issue_pending(struct dma_chan *chan)
 {
 	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	unsigned long		flags;
 
 	dev_vdbg(chan2dev(chan), "issue_pending\n");
 
 	/* Not needed for cyclic transfers */
-	if (test_bit(ATC_IS_CYCLIC, &atchan->status))
+	if (atc_chan_is_cyclic(atchan))
 		return;
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	if (!atc_chan_is_enabled(atchan)) {
 		atc_advance_work(atchan);
 	}
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 }
 
 /**
@@ -1073,6 +1080,7 @@
 	struct at_dma		*atdma = to_at_dma(chan->device);
 	struct at_desc		*desc;
 	struct at_dma_slave	*atslave;
+	unsigned long		flags;
 	int			i;
 	u32			cfg;
 	LIST_HEAD(tmp_list);
@@ -1116,11 +1124,11 @@
 		list_add_tail(&desc->desc_node, &tmp_list);
 	}
 
-	spin_lock_bh(&atchan->lock);
+	spin_lock_irqsave(&atchan->lock, flags);
 	atchan->descs_allocated = i;
 	list_splice(&tmp_list, &atchan->free_list);
 	atchan->completed_cookie = chan->cookie = 1;
-	spin_unlock_bh(&atchan->lock);
+	spin_unlock_irqrestore(&atchan->lock, flags);
 
 	/* channel parameters */
 	channel_writel(atchan, CFG, cfg);
@@ -1260,12 +1268,11 @@
 
 	/* initialize channels related values */
 	INIT_LIST_HEAD(&atdma->dma_common.channels);
-	for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+	for (i = 0; i < pdata->nr_channels; i++) {
 		struct at_dma_chan	*atchan = &atdma->chan[i];
 
 		atchan->chan_common.device = &atdma->dma_common;
 		atchan->chan_common.cookie = atchan->completed_cookie = 1;
-		atchan->chan_common.chan_id = i;
 		list_add_tail(&atchan->chan_common.device_node,
 				&atdma->dma_common.channels);
 
@@ -1293,22 +1300,20 @@
 	if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
 
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask))
+	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
 		atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
-
-	if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
+		/* controller can do slave DMA: can trigger cyclic transfers */
+		dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
 		atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
-
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ||
-	    dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_control = atc_control;
+	}
 
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
 	dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
 	  dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
 	  dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)  ? "slave " : "",
-	  atdma->dma_common.chancnt);
+	  pdata->nr_channels);
 
 	dma_async_device_register(&atdma->dma_common);
 
@@ -1377,27 +1382,112 @@
 	clk_disable(atdma->clk);
 }
 
+static int at_dma_prepare(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
+
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+		/* wait for transaction completion (except in cyclic case) */
+		if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan))
+			return -EAGAIN;
+	}
+	return 0;
+}
+
+static void atc_suspend_cyclic(struct at_dma_chan *atchan)
+{
+	struct dma_chan	*chan = &atchan->chan_common;
+
+	/* Channel should be paused by user
+	 * do it anyway even if it is not done already */
+	if (!atc_chan_is_paused(atchan)) {
+		dev_warn(chan2dev(chan),
+		"cyclic channel not paused, should be done by channel user\n");
+		atc_control(chan, DMA_PAUSE, 0);
+	}
+
+	/* now preserve additional data for cyclic operations */
+	/* next descriptor address in the cyclic list */
+	atchan->save_dscr = channel_readl(atchan, DSCR);
+
+	vdbg_dump_regs(atchan);
+}
+
 static int at_dma_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
 
-	at_dma_off(platform_get_drvdata(pdev));
+	/* preserve data */
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+		if (atc_chan_is_cyclic(atchan))
+			atc_suspend_cyclic(atchan);
+		atchan->save_cfg = channel_readl(atchan, CFG);
+	}
+	atdma->save_imr = dma_readl(atdma, EBCIMR);
+
+	/* disable DMA controller */
+	at_dma_off(atdma);
 	clk_disable(atdma->clk);
 	return 0;
 }
 
+static void atc_resume_cyclic(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	/* restore channel status for cyclic descriptors list:
+	 * next descriptor in the cyclic list at the time of suspend */
+	channel_writel(atchan, SADDR, 0);
+	channel_writel(atchan, DADDR, 0);
+	channel_writel(atchan, CTRLA, 0);
+	channel_writel(atchan, CTRLB, 0);
+	channel_writel(atchan, DSCR, atchan->save_dscr);
+	dma_writel(atdma, CHER, atchan->mask);
+
+	/* channel pause status should be removed by channel user
+	 * We cannot take the initiative to do it here */
+
+	vdbg_dump_regs(atchan);
+}
+
 static int at_dma_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct at_dma *atdma = platform_get_drvdata(pdev);
+	struct dma_chan *chan, *_chan;
 
+	/* bring back DMA controller */
 	clk_enable(atdma->clk);
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	/* restore saved data */
+	dma_writel(atdma, EBCIER, atdma->save_imr);
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+		channel_writel(atchan, CFG, atchan->save_cfg);
+		if (atc_chan_is_cyclic(atchan))
+			atc_resume_cyclic(atchan);
+	}
 	return 0;
 }
 
 static const struct dev_pm_ops at_dma_dev_pm_ops = {
+	.prepare = at_dma_prepare,
 	.suspend_noirq = at_dma_suspend_noirq,
 	.resume_noirq = at_dma_resume_noirq,
 };
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 087dbf1..aa4c9ae 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -204,6 +204,9 @@
  * @status: transmit status information from irq/prep* functions
  *                to tasklet (use atomic operations)
  * @tasklet: bottom half to finish transaction work
+ * @save_cfg: configuration register that is saved on suspend/resume cycle
+ * @save_dscr: for cyclic operations, preserve next descriptor address in
+ *             the cyclic list on suspend/resume cycle
  * @lock: serializes enqueue/dequeue operations to descriptors lists
  * @completed_cookie: identifier for the most recently completed operation
  * @active_list: list of descriptors dmaengine is being running on
@@ -218,6 +221,8 @@
 	u8			mask;
 	unsigned long		status;
 	struct tasklet_struct	tasklet;
+	u32			save_cfg;
+	u32			save_dscr;
 
 	spinlock_t		lock;
 
@@ -248,6 +253,7 @@
  * @chan_common: common dmaengine dma_device object members
  * @ch_regs: memory mapped register base
  * @clk: dma controller clock
+ * @save_imr: interrupt mask register that is saved on suspend/resume cycle
  * @all_chan_mask: all channels availlable in a mask
  * @dma_desc_pool: base of DMA descriptor region (DMA address)
  * @chan: channels table to store at_dma_chan structures
@@ -256,6 +262,7 @@
 	struct dma_device	dma_common;
 	void __iomem		*regs;
 	struct clk		*clk;
+	u32			save_imr;
 
 	u8			all_chan_mask;
 
@@ -355,6 +362,23 @@
 	return !!(dma_readl(atdma, CHSR) & atchan->mask);
 }
 
+/**
+ * atc_chan_is_paused - test channel pause/resume status
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_paused(struct at_dma_chan *atchan)
+{
+	return test_bit(ATC_IS_PAUSED, &atchan->status);
+}
+
+/**
+ * atc_chan_is_cyclic - test if given channel has cyclic property set
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan)
+{
+	return test_bit(ATC_IS_CYCLIC, &atchan->status);
+}
 
 /**
  * set_desc_eol - set end-of-link to descriptor so it will end transfer
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 765f5ff..eb1d864 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -10,6 +10,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/freezer.h>
 #include <linux/init.h>
 #include <linux/kthread.h>
 #include <linux/module.h>
@@ -251,6 +252,7 @@
 	int			i;
 
 	thread_name = current->comm;
+	set_freezable_with_signal();
 
 	ret = -ENOMEM;
 
@@ -305,7 +307,8 @@
 		dma_addr_t dma_srcs[src_cnt];
 		dma_addr_t dma_dsts[dst_cnt];
 		struct completion cmp;
-		unsigned long tmo = msecs_to_jiffies(timeout);
+		unsigned long start, tmo, end = 0 /* compiler... */;
+		bool reload = true;
 		u8 align = 0;
 
 		total_tests++;
@@ -404,7 +407,17 @@
 		}
 		dma_async_issue_pending(chan);
 
-		tmo = wait_for_completion_timeout(&cmp, tmo);
+		do {
+			start = jiffies;
+			if (reload)
+				end = start + msecs_to_jiffies(timeout);
+			else if (end <= start)
+				end = start + 1;
+			tmo = wait_for_completion_interruptible_timeout(&cmp,
+								end - start);
+			reload = try_to_freeze();
+		} while (tmo == -ERESTARTSYS);
+
 		status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
 
 		if (tmo == 0) {
@@ -477,6 +490,8 @@
 	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
 			thread_name, total_tests, failed_tests, ret);
 
+	/* terminate all transfers on specified channels */
+	chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
 	if (iterations > 0)
 		while (!kthread_should_stop()) {
 			DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
@@ -499,6 +514,10 @@
 		list_del(&thread->node);
 		kfree(thread);
 	}
+
+	/* terminate all transfers on specified channels */
+	dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0);
+
 	kfree(dtc);
 }
 
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 4d180ca..9bfd6d3 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1407,12 +1407,11 @@
 	dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
 
 	INIT_LIST_HEAD(&dw->dma.channels);
-	for (i = 0; i < pdata->nr_channels; i++, dw->dma.chancnt++) {
+	for (i = 0; i < pdata->nr_channels; i++) {
 		struct dw_dma_chan	*dwc = &dw->chan[i];
 
 		dwc->chan.device = &dw->dma;
 		dwc->chan.cookie = dwc->completed = 1;
-		dwc->chan.chan_id = i;
 		if (pdata->chan_allocation_order == CHAN_ALLOCATION_ASCENDING)
 			list_add_tail(&dwc->chan.device_node,
 					&dw->dma.channels);
@@ -1468,7 +1467,7 @@
 	dma_writel(dw, CFG, DW_CFG_DMA_EN);
 
 	printk(KERN_INFO "%s: DesignWare DMA Controller, %d channels\n",
-			dev_name(&pdev->dev), dw->dma.chancnt);
+			dev_name(&pdev->dev), pdata->nr_channels);
 
 	dma_async_device_register(&dw->dma);
 
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index 5d7a49b..b47e2b8 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index d99f71c..4be55f9 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -14,6 +14,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
@@ -23,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
+#include <linux/module.h>
 
 #include <asm/irq.h>
 #include <mach/dma-v1.h>
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7bd7e98..f993955 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
@@ -34,6 +35,7 @@
 #include <linux/dmaengine.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 
 #include <asm/irq.h>
 #include <mach/sdma.h>
@@ -318,6 +320,7 @@
 	dma_addr_t			context_phys;
 	struct dma_device		dma_device;
 	struct clk			*clk;
+	struct mutex			channel_0_lock;
 	struct sdma_script_start_addrs	*script_addrs;
 };
 
@@ -415,11 +418,15 @@
 	dma_addr_t buf_phys;
 	int ret;
 
+	mutex_lock(&sdma->channel_0_lock);
+
 	buf_virt = dma_alloc_coherent(NULL,
 			size,
 			&buf_phys, GFP_KERNEL);
-	if (!buf_virt)
-		return -ENOMEM;
+	if (!buf_virt) {
+		ret = -ENOMEM;
+		goto err_out;
+	}
 
 	bd0->mode.command = C0_SETPM;
 	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
@@ -433,6 +440,9 @@
 
 	dma_free_coherent(NULL, size, buf_virt, buf_phys);
 
+err_out:
+	mutex_unlock(&sdma->channel_0_lock);
+
 	return ret;
 }
 
@@ -656,6 +666,8 @@
 	dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0);
 	dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1);
 
+	mutex_lock(&sdma->channel_0_lock);
+
 	memset(context, 0, sizeof(*context));
 	context->channel_state.pc = load_address;
 
@@ -676,6 +688,8 @@
 
 	ret = sdma_run_channel(&sdma->channel[0]);
 
+	mutex_unlock(&sdma->channel_0_lock);
+
 	return ret;
 }
 
@@ -1131,18 +1145,17 @@
 			saddr_arr[i] = addr_arr[i];
 }
 
-static int __init sdma_get_firmware(struct sdma_engine *sdma,
-		const char *fw_name)
+static void sdma_load_firmware(const struct firmware *fw, void *context)
 {
-	const struct firmware *fw;
+	struct sdma_engine *sdma = context;
 	const struct sdma_firmware_header *header;
-	int ret;
 	const struct sdma_script_start_addrs *addr;
 	unsigned short *ram_code;
 
-	ret = request_firmware(&fw, fw_name, sdma->dev);
-	if (ret)
-		return ret;
+	if (!fw) {
+		dev_err(sdma->dev, "firmware not found\n");
+		return;
+	}
 
 	if (fw->size < sizeof(*header))
 		goto err_firmware;
@@ -1172,6 +1185,16 @@
 
 err_firmware:
 	release_firmware(fw);
+}
+
+static int __init sdma_get_firmware(struct sdma_engine *sdma,
+		const char *fw_name)
+{
+	int ret;
+
+	ret = request_firmware_nowait(THIS_MODULE,
+			FW_ACTION_HOTPLUG, fw_name, sdma->dev,
+			GFP_KERNEL, sdma, sdma_load_firmware);
 
 	return ret;
 }
@@ -1269,11 +1292,14 @@
 	struct sdma_platform_data *pdata = pdev->dev.platform_data;
 	int i;
 	struct sdma_engine *sdma;
+	s32 *saddr_arr;
 
 	sdma = kzalloc(sizeof(*sdma), GFP_KERNEL);
 	if (!sdma)
 		return -ENOMEM;
 
+	mutex_init(&sdma->channel_0_lock);
+
 	sdma->dev = &pdev->dev;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1310,6 +1336,11 @@
 		goto err_alloc;
 	}
 
+	/* initially no scripts available */
+	saddr_arr = (s32 *)sdma->script_addrs;
+	for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+		saddr_arr[i] = -EINVAL;
+
 	if (of_id)
 		pdev->id_entry = of_id->data;
 	sdma->devtype = pdev->id_entry->driver_data;
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 8a3fdd8..19a0c64 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 #include <linux/intel_mid_dma.h>
+#include <linux/module.h>
 
 #define MAX_CHAN	4 /*max ch across controllers*/
 #include "intel_mid_dma_regs.h"
@@ -115,16 +116,15 @@
 
 /**
  * dmac1_mask_periphral_intr -	mask the periphral interrupt
- * @midc: dma channel for which masking is required
+ * @mid: dma device for which masking is required
  *
  * Masks the DMA periphral interrupt
  * this is valid for DMAC1 family controllers only
  * This controller should have periphral mask registers already mapped
  */
-static void dmac1_mask_periphral_intr(struct intel_mid_dma_chan *midc)
+static void dmac1_mask_periphral_intr(struct middma_device *mid)
 {
 	u32 pimr;
-	struct middma_device *mid = to_middma_device(midc->chan.device);
 
 	if (mid->pimr_mask) {
 		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
@@ -184,7 +184,6 @@
 static void disable_dma_interrupt(struct intel_mid_dma_chan *midc)
 {
 	/*Check LPE PISR, make sure fwd is disabled*/
-	dmac1_mask_periphral_intr(midc);
 	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK);
 	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
 	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
@@ -1114,7 +1113,6 @@
 
 		midch->chan.device = &dma->common;
 		midch->chan.cookie =  1;
-		midch->chan.chan_id = i;
 		midch->ch_id = dma->chan_base + i;
 		pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id);
 
@@ -1150,7 +1148,6 @@
 	dma_cap_set(DMA_SLAVE, dma->common.cap_mask);
 	dma_cap_set(DMA_PRIVATE, dma->common.cap_mask);
 	dma->common.dev = &pdev->dev;
-	dma->common.chancnt = dma->max_chan;
 
 	dma->common.device_alloc_chan_resources =
 					intel_mid_dma_alloc_chan_resources;
@@ -1350,6 +1347,7 @@
 		if (device->ch[i].in_use)
 			return -EAGAIN;
 	}
+	dmac1_mask_periphral_intr(device);
 	device->state = SUSPENDED;
 	pci_save_state(pci);
 	pci_disable_device(pci);
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 6815905..0e5ef33 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <mach/ipu.h>
 
@@ -1307,6 +1308,7 @@
 	    ipu_submit_buffer(ichan, descnew, sgnew, ichan->active_buffer) < 0) {
 		callback = descnew->txd.callback;
 		callback_param = descnew->txd.callback_param;
+		list_del_init(&descnew->list);
 		spin_unlock(&ichan->lock);
 		if (callback)
 			callback(callback_param);
@@ -1428,39 +1430,58 @@
 {
 	struct idmac_channel *ichan = to_idmac_chan(chan);
 	struct idmac *idmac = to_idmac(chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	struct list_head *list, *tmp;
 	unsigned long flags;
 	int i;
 
-	/* Only supports DMA_TERMINATE_ALL */
-	if (cmd != DMA_TERMINATE_ALL)
-		return -ENXIO;
+	switch (cmd) {
+	case DMA_PAUSE:
+		spin_lock_irqsave(&ipu->lock, flags);
+		ipu_ic_disable_task(ipu, chan->chan_id);
 
-	ipu_disable_channel(idmac, ichan,
-			    ichan->status >= IPU_CHANNEL_ENABLED);
+		/* Return all descriptors into "prepared" state */
+		list_for_each_safe(list, tmp, &ichan->queue)
+			list_del_init(list);
 
-	tasklet_disable(&to_ipu(idmac)->tasklet);
+		ichan->sg[0] = NULL;
+		ichan->sg[1] = NULL;
 
-	/* ichan->queue is modified in ISR, have to spinlock */
-	spin_lock_irqsave(&ichan->lock, flags);
-	list_splice_init(&ichan->queue, &ichan->free_list);
+		spin_unlock_irqrestore(&ipu->lock, flags);
 
-	if (ichan->desc)
-		for (i = 0; i < ichan->n_tx_desc; i++) {
-			struct idmac_tx_desc *desc = ichan->desc + i;
-			if (list_empty(&desc->list))
-				/* Descriptor was prepared, but not submitted */
-				list_add(&desc->list, &ichan->free_list);
+		ichan->status = IPU_CHANNEL_INITIALIZED;
+		break;
+	case DMA_TERMINATE_ALL:
+		ipu_disable_channel(idmac, ichan,
+				    ichan->status >= IPU_CHANNEL_ENABLED);
 
-			async_tx_clear_ack(&desc->txd);
-		}
+		tasklet_disable(&ipu->tasklet);
 
-	ichan->sg[0] = NULL;
-	ichan->sg[1] = NULL;
-	spin_unlock_irqrestore(&ichan->lock, flags);
+		/* ichan->queue is modified in ISR, have to spinlock */
+		spin_lock_irqsave(&ichan->lock, flags);
+		list_splice_init(&ichan->queue, &ichan->free_list);
 
-	tasklet_enable(&to_ipu(idmac)->tasklet);
+		if (ichan->desc)
+			for (i = 0; i < ichan->n_tx_desc; i++) {
+				struct idmac_tx_desc *desc = ichan->desc + i;
+				if (list_empty(&desc->list))
+					/* Descriptor was prepared, but not submitted */
+					list_add(&desc->list, &ichan->free_list);
 
-	ichan->status = IPU_CHANNEL_INITIALIZED;
+				async_tx_clear_ack(&desc->txd);
+			}
+
+		ichan->sg[0] = NULL;
+		ichan->sg[1] = NULL;
+		spin_unlock_irqrestore(&ichan->lock, flags);
+
+		tasklet_enable(&ipu->tasklet);
+
+		ichan->status = IPU_CHANNEL_INITIALIZED;
+		break;
+	default:
+		return -ENOSYS;
+	}
 
 	return 0;
 }
@@ -1663,7 +1684,6 @@
 		struct idmac_channel *ichan = ipu->channel + i;
 
 		idmac_control(&ichan->dma_chan, DMA_TERMINATE_ALL, 0);
-		idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
 	}
 
 	dma_async_device_unregister(&idmac->dma);
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index b9bae94..8ba4edc 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -741,7 +741,6 @@
 		mchan = &mdma->channels[i];
 
 		mchan->chan.device = dma;
-		mchan->chan.chan_id = i;
 		mchan->chan.cookie = 1;
 		mchan->completed_cookie = mchan->chan.cookie;
 
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index be641cb..b4588bd 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -130,6 +130,23 @@
 	struct mxs_dma_chan		mxs_chans[MXS_DMA_CHANNELS];
 };
 
+static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable)
+{
+	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+	int chan_id = mxs_chan->chan.chan_id;
+	int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR;
+
+	/* enable apbh channel clock */
+	if (dma_is_apbh()) {
+		if (apbh_is_old())
+			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
+				mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+		else
+			writel(1 << chan_id,
+				mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
+	}
+}
+
 static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
 {
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@@ -148,38 +165,21 @@
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
 	int chan_id = mxs_chan->chan.chan_id;
 
+	/* clkgate needs to be enabled before writing other registers */
+	mxs_dma_clkgate(mxs_chan, 1);
+
 	/* set cmd_addr up */
 	writel(mxs_chan->ccw_phys,
 		mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
 
-	/* enable apbh channel clock */
-	if (dma_is_apbh()) {
-		if (apbh_is_old())
-			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
-		else
-			writel(1 << chan_id,
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
-	}
-
 	/* write 1 to SEMA to kick off the channel */
 	writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
 }
 
 static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
 {
-	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
-	int chan_id = mxs_chan->chan.chan_id;
-
 	/* disable apbh channel clock */
-	if (dma_is_apbh()) {
-		if (apbh_is_old())
-			writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
-		else
-			writel(1 << chan_id,
-				mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
-	}
+	mxs_dma_clkgate(mxs_chan, 0);
 
 	mxs_chan->status = DMA_SUCCESS;
 }
@@ -338,7 +338,10 @@
 	if (ret)
 		goto err_clk;
 
+	/* clkgate needs to be enabled for reset to finish */
+	mxs_dma_clkgate(mxs_chan, 1);
 	mxs_dma_reset_chan(mxs_chan);
+	mxs_dma_clkgate(mxs_chan, 0);
 
 	dma_async_tx_descriptor_init(&mxs_chan->desc, chan);
 	mxs_chan->desc.tx_submit = mxs_dma_tx_submit;
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 1ac8d4b..a6d0e3d 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -60,7 +60,7 @@
 #define DMA_DESC_FOLLOW_WITHOUT_IRQ	0x2
 #define DMA_DESC_FOLLOW_WITH_IRQ	0x3
 
-#define MAX_CHAN_NR			8
+#define MAX_CHAN_NR			12
 
 #define DMA_MASK_CTL0_MODE	0x33333333
 #define DMA_MASK_CTL2_MODE	0x00003333
@@ -872,8 +872,7 @@
 	int i;
 
 	nr_channels = id->driver_data;
-	pd = kzalloc(sizeof(struct pch_dma)+
-		sizeof(struct pch_dma_chan) * nr_channels, GFP_KERNEL);
+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 	if (!pd)
 		return -ENOMEM;
 
@@ -926,7 +925,6 @@
 	}
 
 	pd->dma.dev = &pdev->dev;
-	pd->dma.chancnt = nr_channels;
 
 	INIT_LIST_HEAD(&pd->dma.channels);
 
@@ -935,7 +933,6 @@
 
 		pd_chan->chan.device = &pd->dma;
 		pd_chan->chan.cookie = 1;
-		pd_chan->chan.chan_id = i;
 
 		pd_chan->membase = &regs->desc[i];
 
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 00eee59..57104147 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -17,6 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl330.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
 
 #define NR_DEFAULT_DESC	16
 
@@ -68,6 +70,14 @@
 	 * NULL if the channel is available to be acquired.
 	 */
 	void *pl330_chid;
+
+	/* For D-to-M and M-to-D channels */
+	int burst_sz; /* the peripheral fifo width */
+	int burst_len; /* the number of burst */
+	dma_addr_t fifo_addr;
+
+	/* for cyclic capability */
+	bool cyclic;
 };
 
 struct dma_pl330_dmac {
@@ -83,6 +93,8 @@
 
 	/* Peripheral channels connected to this DMAC */
 	struct dma_pl330_chan *peripherals; /* keep at end */
+
+	struct clk *clk;
 };
 
 struct dma_pl330_desc {
@@ -152,6 +164,31 @@
 	spin_unlock_irqrestore(&pdmac->pool_lock, flags);
 }
 
+static inline void handle_cyclic_desc_list(struct list_head *list)
+{
+	struct dma_pl330_desc *desc;
+	struct dma_pl330_chan *pch;
+	unsigned long flags;
+
+	if (list_empty(list))
+		return;
+
+	list_for_each_entry(desc, list, node) {
+		dma_async_tx_callback callback;
+
+		/* Change status to reload it */
+		desc->status = PREP;
+		pch = desc->pchan;
+		callback = desc->txd.callback;
+		if (callback)
+			callback(desc->txd.callback_param);
+	}
+
+	spin_lock_irqsave(&pch->lock, flags);
+	list_splice_tail_init(list, &pch->work_list);
+	spin_unlock_irqrestore(&pch->lock, flags);
+}
+
 static inline void fill_queue(struct dma_pl330_chan *pch)
 {
 	struct dma_pl330_desc *desc;
@@ -205,7 +242,10 @@
 
 	spin_unlock_irqrestore(&pch->lock, flags);
 
-	free_desc_list(&list);
+	if (pch->cyclic)
+		handle_cyclic_desc_list(&list);
+	else
+		free_desc_list(&list);
 }
 
 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
@@ -236,6 +276,7 @@
 	spin_lock_irqsave(&pch->lock, flags);
 
 	pch->completed = chan->cookie = 1;
+	pch->cyclic = false;
 
 	pch->pl330_chid = pl330_request_channel(&pdmac->pif);
 	if (!pch->pl330_chid) {
@@ -253,25 +294,52 @@
 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
 {
 	struct dma_pl330_chan *pch = to_pchan(chan);
-	struct dma_pl330_desc *desc;
+	struct dma_pl330_desc *desc, *_dt;
 	unsigned long flags;
+	struct dma_pl330_dmac *pdmac = pch->dmac;
+	struct dma_slave_config *slave_config;
+	LIST_HEAD(list);
 
-	/* Only supports DMA_TERMINATE_ALL */
-	if (cmd != DMA_TERMINATE_ALL)
+	switch (cmd) {
+	case DMA_TERMINATE_ALL:
+		spin_lock_irqsave(&pch->lock, flags);
+
+		/* FLUSH the PL330 Channel thread */
+		pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
+
+		/* Mark all desc done */
+		list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
+			desc->status = DONE;
+			pch->completed = desc->txd.cookie;
+			list_move_tail(&desc->node, &list);
+		}
+
+		list_splice_tail_init(&list, &pdmac->desc_pool);
+		spin_unlock_irqrestore(&pch->lock, flags);
+		break;
+	case DMA_SLAVE_CONFIG:
+		slave_config = (struct dma_slave_config *)arg;
+
+		if (slave_config->direction == DMA_TO_DEVICE) {
+			if (slave_config->dst_addr)
+				pch->fifo_addr = slave_config->dst_addr;
+			if (slave_config->dst_addr_width)
+				pch->burst_sz = __ffs(slave_config->dst_addr_width);
+			if (slave_config->dst_maxburst)
+				pch->burst_len = slave_config->dst_maxburst;
+		} else if (slave_config->direction == DMA_FROM_DEVICE) {
+			if (slave_config->src_addr)
+				pch->fifo_addr = slave_config->src_addr;
+			if (slave_config->src_addr_width)
+				pch->burst_sz = __ffs(slave_config->src_addr_width);
+			if (slave_config->src_maxburst)
+				pch->burst_len = slave_config->src_maxburst;
+		}
+		break;
+	default:
+		dev_err(pch->dmac->pif.dev, "Not supported command.\n");
 		return -ENXIO;
-
-	spin_lock_irqsave(&pch->lock, flags);
-
-	/* FLUSH the PL330 Channel thread */
-	pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
-
-	/* Mark all desc done */
-	list_for_each_entry(desc, &pch->work_list, node)
-		desc->status = DONE;
-
-	spin_unlock_irqrestore(&pch->lock, flags);
-
-	pl330_tasklet((unsigned long) pch);
+	}
 
 	return 0;
 }
@@ -288,6 +356,9 @@
 	pl330_release_channel(pch->pl330_chid);
 	pch->pl330_chid = NULL;
 
+	if (pch->cyclic)
+		list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
+
 	spin_unlock_irqrestore(&pch->lock, flags);
 }
 
@@ -453,7 +524,7 @@
 
 	if (peri) {
 		desc->req.rqtype = peri->rqtype;
-		desc->req.peri = peri->peri_id;
+		desc->req.peri = pch->chan.chan_id;
 	} else {
 		desc->req.rqtype = MEMTOMEM;
 		desc->req.peri = 0;
@@ -524,6 +595,51 @@
 	return burst_len;
 }
 
+static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
+		size_t period_len, enum dma_data_direction direction)
+{
+	struct dma_pl330_desc *desc;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	dma_addr_t dst;
+	dma_addr_t src;
+
+	desc = pl330_get_desc(pch);
+	if (!desc) {
+		dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
+			__func__, __LINE__);
+		return NULL;
+	}
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		desc->rqcfg.src_inc = 1;
+		desc->rqcfg.dst_inc = 0;
+		src = dma_addr;
+		dst = pch->fifo_addr;
+		break;
+	case DMA_FROM_DEVICE:
+		desc->rqcfg.src_inc = 0;
+		desc->rqcfg.dst_inc = 1;
+		src = pch->fifo_addr;
+		dst = dma_addr;
+		break;
+	default:
+		dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
+		__func__, __LINE__);
+		return NULL;
+	}
+
+	desc->rqcfg.brst_size = pch->burst_sz;
+	desc->rqcfg.brst_len = 1;
+
+	pch->cyclic = true;
+
+	fill_px(&desc->px, dst, src, period_len);
+
+	return &desc->txd;
+}
+
 static struct dma_async_tx_descriptor *
 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 		dma_addr_t src, size_t len, unsigned long flags)
@@ -579,7 +695,7 @@
 	struct dma_pl330_peri *peri = chan->private;
 	struct scatterlist *sg;
 	unsigned long flags;
-	int i, burst_size;
+	int i;
 	dma_addr_t addr;
 
 	if (unlikely(!pch || !sgl || !sg_len || !peri))
@@ -595,8 +711,7 @@
 		return NULL;
 	}
 
-	addr = peri->fifo_addr;
-	burst_size = peri->burst_sz;
+	addr = pch->fifo_addr;
 
 	first = NULL;
 
@@ -644,7 +759,7 @@
 				sg_dma_address(sg), addr, sg_dma_len(sg));
 		}
 
-		desc->rqcfg.brst_size = burst_size;
+		desc->rqcfg.brst_size = pch->burst_sz;
 		desc->rqcfg.brst_len = 1;
 	}
 
@@ -696,6 +811,30 @@
 		goto probe_err1;
 	}
 
+	pdmac->clk = clk_get(&adev->dev, "dma");
+	if (IS_ERR(pdmac->clk)) {
+		dev_err(&adev->dev, "Cannot get operation clock.\n");
+		ret = -EINVAL;
+		goto probe_err1;
+	}
+
+	amba_set_drvdata(adev, pdmac);
+
+#ifdef CONFIG_PM_RUNTIME
+	/* to use the runtime PM helper functions */
+	pm_runtime_enable(&adev->dev);
+
+	/* enable the power domain */
+	if (pm_runtime_get_sync(&adev->dev)) {
+		dev_err(&adev->dev, "failed to get runtime pm\n");
+		ret = -ENODEV;
+		goto probe_err1;
+	}
+#else
+	/* enable dma clk */
+	clk_enable(pdmac->clk);
+#endif
+
 	irq = adev->irq[0];
 	ret = request_irq(irq, pl330_irq_handler, 0,
 			dev_name(&adev->dev), pi);
@@ -732,6 +871,7 @@
 			case MEMTODEV:
 			case DEVTOMEM:
 				dma_cap_set(DMA_SLAVE, pd->cap_mask);
+				dma_cap_set(DMA_CYCLIC, pd->cap_mask);
 				break;
 			default:
 				dev_err(&adev->dev, "DEVTODEV Not Supported\n");
@@ -747,11 +887,9 @@
 		spin_lock_init(&pch->lock);
 		pch->pl330_chid = NULL;
 		pch->chan.device = pd;
-		pch->chan.chan_id = i;
 		pch->dmac = pdmac;
 
 		/* Add the channel to the DMAC list */
-		pd->chancnt++;
 		list_add_tail(&pch->chan.device_node, &pd->channels);
 	}
 
@@ -760,6 +898,7 @@
 	pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
 	pd->device_free_chan_resources = pl330_free_chan_resources;
 	pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+	pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
 	pd->device_tx_status = pl330_tx_status;
 	pd->device_prep_slave_sg = pl330_prep_slave_sg;
 	pd->device_control = pl330_control;
@@ -771,8 +910,6 @@
 		goto probe_err4;
 	}
 
-	amba_set_drvdata(adev, pdmac);
-
 	dev_info(&adev->dev,
 		"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
 	dev_info(&adev->dev,
@@ -833,6 +970,13 @@
 	res = &adev->res;
 	release_mem_region(res->start, resource_size(res));
 
+#ifdef CONFIG_PM_RUNTIME
+	pm_runtime_put(&adev->dev);
+	pm_runtime_disable(&adev->dev);
+#else
+	clk_disable(pdmac->clk);
+#endif
+
 	kfree(pdmac);
 
 	return 0;
@@ -846,10 +990,49 @@
 	{ 0, 0 },
 };
 
+#ifdef CONFIG_PM_RUNTIME
+static int pl330_runtime_suspend(struct device *dev)
+{
+	struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+	if (!pdmac) {
+		dev_err(dev, "failed to get dmac\n");
+		return -ENODEV;
+	}
+
+	clk_disable(pdmac->clk);
+
+	return 0;
+}
+
+static int pl330_runtime_resume(struct device *dev)
+{
+	struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
+
+	if (!pdmac) {
+		dev_err(dev, "failed to get dmac\n");
+		return -ENODEV;
+	}
+
+	clk_enable(pdmac->clk);
+
+	return 0;
+}
+#else
+#define pl330_runtime_suspend	NULL
+#define pl330_runtime_resume	NULL
+#endif /* CONFIG_PM_RUNTIME */
+
+static const struct dev_pm_ops pl330_pm_ops = {
+	.runtime_suspend = pl330_runtime_suspend,
+	.runtime_resume = pl330_runtime_resume,
+};
+
 static struct amba_driver pl330_driver = {
 	.drv = {
 		.owner = THIS_MODULE,
 		.name = "dma-pl330",
+		.pm = &pl330_pm_ops,
 	},
 	.id_table = pl330_ids,
 	.probe = pl330_probe,
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index 7f49235..81809c2 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -259,14 +259,23 @@
 	return 0;
 }
 
+static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan);
+
 static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx)
 {
 	struct sh_desc *desc = tx_to_sh_desc(tx), *chunk, *last = desc, *c;
 	struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan);
+	struct sh_dmae_slave *param = tx->chan->private;
 	dma_async_tx_callback callback = tx->callback;
 	dma_cookie_t cookie;
+	bool power_up;
 
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irq(&sh_chan->desc_lock);
+
+	if (list_empty(&sh_chan->ld_queue))
+		power_up = true;
+	else
+		power_up = false;
 
 	cookie = sh_chan->common.cookie;
 	cookie++;
@@ -302,7 +311,38 @@
 		tx->cookie, &last->async_tx, sh_chan->id,
 		desc->hw.sar, desc->hw.tcr, desc->hw.dar);
 
-	spin_unlock_bh(&sh_chan->desc_lock);
+	if (power_up) {
+		sh_chan->pm_state = DMAE_PM_BUSY;
+
+		pm_runtime_get(sh_chan->dev);
+
+		spin_unlock_irq(&sh_chan->desc_lock);
+
+		pm_runtime_barrier(sh_chan->dev);
+
+		spin_lock_irq(&sh_chan->desc_lock);
+
+		/* Have we been reset, while waiting? */
+		if (sh_chan->pm_state != DMAE_PM_ESTABLISHED) {
+			dev_dbg(sh_chan->dev, "Bring up channel %d\n",
+				sh_chan->id);
+			if (param) {
+				const struct sh_dmae_slave_config *cfg =
+					param->config;
+
+				dmae_set_dmars(sh_chan, cfg->mid_rid);
+				dmae_set_chcr(sh_chan, cfg->chcr);
+			} else {
+				dmae_init(sh_chan);
+			}
+
+			if (sh_chan->pm_state == DMAE_PM_PENDING)
+				sh_chan_xfer_ld_queue(sh_chan);
+			sh_chan->pm_state = DMAE_PM_ESTABLISHED;
+		}
+	}
+
+	spin_unlock_irq(&sh_chan->desc_lock);
 
 	return cookie;
 }
@@ -346,8 +386,6 @@
 	struct sh_dmae_slave *param = chan->private;
 	int ret;
 
-	pm_runtime_get_sync(sh_chan->dev);
-
 	/*
 	 * This relies on the guarantee from dmaengine that alloc_chan_resources
 	 * never runs concurrently with itself or free_chan_resources.
@@ -367,31 +405,20 @@
 		}
 
 		param->config = cfg;
-
-		dmae_set_dmars(sh_chan, cfg->mid_rid);
-		dmae_set_chcr(sh_chan, cfg->chcr);
-	} else {
-		dmae_init(sh_chan);
 	}
 
-	spin_lock_bh(&sh_chan->desc_lock);
 	while (sh_chan->descs_allocated < NR_DESCS_PER_CHANNEL) {
-		spin_unlock_bh(&sh_chan->desc_lock);
 		desc = kzalloc(sizeof(struct sh_desc), GFP_KERNEL);
-		if (!desc) {
-			spin_lock_bh(&sh_chan->desc_lock);
+		if (!desc)
 			break;
-		}
 		dma_async_tx_descriptor_init(&desc->async_tx,
 					&sh_chan->common);
 		desc->async_tx.tx_submit = sh_dmae_tx_submit;
 		desc->mark = DESC_IDLE;
 
-		spin_lock_bh(&sh_chan->desc_lock);
 		list_add(&desc->node, &sh_chan->ld_free);
 		sh_chan->descs_allocated++;
 	}
-	spin_unlock_bh(&sh_chan->desc_lock);
 
 	if (!sh_chan->descs_allocated) {
 		ret = -ENOMEM;
@@ -405,7 +432,7 @@
 		clear_bit(param->slave_id, sh_dmae_slave_used);
 etestused:
 efindslave:
-	pm_runtime_put(sh_chan->dev);
+	chan->private = NULL;
 	return ret;
 }
 
@@ -417,7 +444,6 @@
 	struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
 	struct sh_desc *desc, *_desc;
 	LIST_HEAD(list);
-	int descs = sh_chan->descs_allocated;
 
 	/* Protect against ISR */
 	spin_lock_irq(&sh_chan->desc_lock);
@@ -437,15 +463,12 @@
 		chan->private = NULL;
 	}
 
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irq(&sh_chan->desc_lock);
 
 	list_splice_init(&sh_chan->ld_free, &list);
 	sh_chan->descs_allocated = 0;
 
-	spin_unlock_bh(&sh_chan->desc_lock);
-
-	if (descs > 0)
-		pm_runtime_put(sh_chan->dev);
+	spin_unlock_irq(&sh_chan->desc_lock);
 
 	list_for_each_entry_safe(desc, _desc, &list, node)
 		kfree(desc);
@@ -534,6 +557,7 @@
 	struct sh_desc *first = NULL, *new = NULL /* compiler... */;
 	LIST_HEAD(tx_list);
 	int chunks = 0;
+	unsigned long irq_flags;
 	int i;
 
 	if (!sg_len)
@@ -544,7 +568,7 @@
 			(SH_DMA_TCR_MAX + 1);
 
 	/* Have to lock the whole loop to protect against concurrent release */
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irqsave(&sh_chan->desc_lock, irq_flags);
 
 	/*
 	 * Chaining:
@@ -590,7 +614,7 @@
 	/* Put them back on the free list, so, they don't get lost */
 	list_splice_tail(&tx_list, &sh_chan->ld_free);
 
-	spin_unlock_bh(&sh_chan->desc_lock);
+	spin_unlock_irqrestore(&sh_chan->desc_lock, irq_flags);
 
 	return &first->async_tx;
 
@@ -599,7 +623,7 @@
 		new->mark = DESC_IDLE;
 	list_splice(&tx_list, &sh_chan->ld_free);
 
-	spin_unlock_bh(&sh_chan->desc_lock);
+	spin_unlock_irqrestore(&sh_chan->desc_lock, irq_flags);
 
 	return NULL;
 }
@@ -661,6 +685,7 @@
 			   unsigned long arg)
 {
 	struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+	unsigned long flags;
 
 	/* Only supports DMA_TERMINATE_ALL */
 	if (cmd != DMA_TERMINATE_ALL)
@@ -669,7 +694,7 @@
 	if (!chan)
 		return -EINVAL;
 
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irqsave(&sh_chan->desc_lock, flags);
 	dmae_halt(sh_chan);
 
 	if (!list_empty(&sh_chan->ld_queue)) {
@@ -678,9 +703,8 @@
 						  struct sh_desc, node);
 		desc->partial = (desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) <<
 			sh_chan->xmit_shift;
-
 	}
-	spin_unlock_bh(&sh_chan->desc_lock);
+	spin_unlock_irqrestore(&sh_chan->desc_lock, flags);
 
 	sh_dmae_chan_ld_cleanup(sh_chan, true);
 
@@ -695,8 +719,9 @@
 	dma_cookie_t cookie = 0;
 	dma_async_tx_callback callback = NULL;
 	void *param = NULL;
+	unsigned long flags;
 
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irqsave(&sh_chan->desc_lock, flags);
 	list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) {
 		struct dma_async_tx_descriptor *tx = &desc->async_tx;
 
@@ -762,7 +787,13 @@
 		     async_tx_test_ack(&desc->async_tx)) || all) {
 			/* Remove from ld_queue list */
 			desc->mark = DESC_IDLE;
+
 			list_move(&desc->node, &sh_chan->ld_free);
+
+			if (list_empty(&sh_chan->ld_queue)) {
+				dev_dbg(sh_chan->dev, "Bring down channel %d\n", sh_chan->id);
+				pm_runtime_put(sh_chan->dev);
+			}
 		}
 	}
 
@@ -773,7 +804,7 @@
 		 */
 		sh_chan->completed_cookie = sh_chan->common.cookie;
 
-	spin_unlock_bh(&sh_chan->desc_lock);
+	spin_unlock_irqrestore(&sh_chan->desc_lock, flags);
 
 	if (callback)
 		callback(param);
@@ -792,14 +823,14 @@
 		;
 }
 
+/* Called under spin_lock_irq(&sh_chan->desc_lock) */
 static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
 {
 	struct sh_desc *desc;
 
-	spin_lock_bh(&sh_chan->desc_lock);
 	/* DMA work check */
 	if (dmae_is_busy(sh_chan))
-		goto sh_chan_xfer_ld_queue_end;
+		return;
 
 	/* Find the first not transferred descriptor */
 	list_for_each_entry(desc, &sh_chan->ld_queue, node)
@@ -812,15 +843,18 @@
 			dmae_start(sh_chan);
 			break;
 		}
-
-sh_chan_xfer_ld_queue_end:
-	spin_unlock_bh(&sh_chan->desc_lock);
 }
 
 static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan)
 {
 	struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
-	sh_chan_xfer_ld_queue(sh_chan);
+
+	spin_lock_irq(&sh_chan->desc_lock);
+	if (sh_chan->pm_state == DMAE_PM_ESTABLISHED)
+		sh_chan_xfer_ld_queue(sh_chan);
+	else
+		sh_chan->pm_state = DMAE_PM_PENDING;
+	spin_unlock_irq(&sh_chan->desc_lock);
 }
 
 static enum dma_status sh_dmae_tx_status(struct dma_chan *chan,
@@ -831,6 +865,7 @@
 	dma_cookie_t last_used;
 	dma_cookie_t last_complete;
 	enum dma_status status;
+	unsigned long flags;
 
 	sh_dmae_chan_ld_cleanup(sh_chan, false);
 
@@ -841,7 +876,7 @@
 	BUG_ON(last_complete < 0);
 	dma_set_tx_state(txstate, last_complete, last_used, 0);
 
-	spin_lock_bh(&sh_chan->desc_lock);
+	spin_lock_irqsave(&sh_chan->desc_lock, flags);
 
 	status = dma_async_is_complete(cookie, last_complete, last_used);
 
@@ -859,7 +894,7 @@
 			}
 	}
 
-	spin_unlock_bh(&sh_chan->desc_lock);
+	spin_unlock_irqrestore(&sh_chan->desc_lock, flags);
 
 	return status;
 }
@@ -912,6 +947,12 @@
 
 		list_splice_init(&sh_chan->ld_queue, &dl);
 
+		if (!list_empty(&dl)) {
+			dev_dbg(sh_chan->dev, "Bring down channel %d\n", sh_chan->id);
+			pm_runtime_put(sh_chan->dev);
+		}
+		sh_chan->pm_state = DMAE_PM_ESTABLISHED;
+
 		spin_unlock(&sh_chan->desc_lock);
 
 		/* Complete all  */
@@ -952,7 +993,7 @@
 	u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
 	u32 dar_buf = sh_dmae_readl(sh_chan, DAR);
 
-	spin_lock(&sh_chan->desc_lock);
+	spin_lock_irq(&sh_chan->desc_lock);
 	list_for_each_entry(desc, &sh_chan->ld_queue, node) {
 		if (desc->mark == DESC_SUBMITTED &&
 		    ((desc->direction == DMA_FROM_DEVICE &&
@@ -965,10 +1006,10 @@
 			break;
 		}
 	}
-	spin_unlock(&sh_chan->desc_lock);
-
 	/* Next desc */
 	sh_chan_xfer_ld_queue(sh_chan);
+	spin_unlock_irq(&sh_chan->desc_lock);
+
 	sh_dmae_chan_ld_cleanup(sh_chan, false);
 }
 
@@ -1036,7 +1077,9 @@
 		return -ENOMEM;
 	}
 
-	/* copy struct dma_device */
+	new_sh_chan->pm_state = DMAE_PM_ESTABLISHED;
+
+	/* reference struct dma_device */
 	new_sh_chan->common.device = &shdev->common;
 
 	new_sh_chan->dev = shdev->common.dev;
diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h
index dc56576..2b55a27 100644
--- a/drivers/dma/shdma.h
+++ b/drivers/dma/shdma.h
@@ -23,6 +23,12 @@
 
 struct device;
 
+enum dmae_pm_state {
+	DMAE_PM_ESTABLISHED,
+	DMAE_PM_BUSY,
+	DMAE_PM_PENDING,
+};
+
 struct sh_dmae_chan {
 	dma_cookie_t completed_cookie;	/* The maximum cookie completed */
 	spinlock_t desc_lock;		/* Descriptor operation lock */
@@ -38,6 +44,7 @@
 	u32 __iomem *base;
 	char dev_id[16];		/* unique name per DMAC of channel */
 	int pm_error;
+	enum dmae_pm_state pm_state;
 };
 
 struct sh_dmae_device {
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 467e4dc..13259ca 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -9,6 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/dmaengine.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index f69f90a6..a4a398f 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -753,7 +753,7 @@
 
 	INIT_LIST_HEAD(&td->dma.channels);
 
-	for (i = 0; i < pdata->nr_channels; i++, td->dma.chancnt++) {
+	for (i = 0; i < pdata->nr_channels; i++) {
 		struct timb_dma_chan *td_chan = &td->channels[i];
 		struct timb_dma_platform_data_channel *pchan =
 			pdata->channels + i;
@@ -762,12 +762,11 @@
 		if ((i % 2) == pchan->rx) {
 			dev_err(&pdev->dev, "Wrong channel configuration\n");
 			err = -EINVAL;
-			goto err_tasklet_kill;
+			goto err_free_irq;
 		}
 
 		td_chan->chan.device = &td->dma;
 		td_chan->chan.cookie = 1;
-		td_chan->chan.chan_id = i;
 		spin_lock_init(&td_chan->lock);
 		INIT_LIST_HEAD(&td_chan->active_list);
 		INIT_LIST_HEAD(&td_chan->queue);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 203361e..5948a21 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -214,7 +214,7 @@
 
 config EDAC_SBRIDGE
 	tristate "Intel Sandy-Bridge Integrated MC"
-	depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
+	depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
 	depends on EXPERIMENTAL
 	help
 	  Support for error detection and correction the Intel
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
index a687a0d..a774c0d 100644
--- a/drivers/edac/cpc925_edac.c
+++ b/drivers/edac/cpc925_edac.c
@@ -90,6 +90,7 @@
 	ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
 			   APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
 };
+#define APIMASK_ADI(n)		CPC925_BIT(((n)+1))
 
 /************************************************************
  *	Processor Interface Exception Register (APIEXCP)
@@ -581,16 +582,73 @@
 }
 
 /******************** CPU err device********************************/
+static u32 cpc925_cpu_mask_disabled(void)
+{
+	struct device_node *cpus;
+	struct device_node *cpunode = NULL;
+	static u32 mask = 0;
+
+	/* use cached value if available */
+	if (mask != 0)
+		return mask;
+
+	mask = APIMASK_ADI0 | APIMASK_ADI1;
+
+	cpus = of_find_node_by_path("/cpus");
+	if (cpus == NULL) {
+		cpc925_printk(KERN_DEBUG, "No /cpus node !\n");
+		return 0;
+	}
+
+	while ((cpunode = of_get_next_child(cpus, cpunode)) != NULL) {
+		const u32 *reg = of_get_property(cpunode, "reg", NULL);
+
+		if (strcmp(cpunode->type, "cpu")) {
+			cpc925_printk(KERN_ERR, "Not a cpu node in /cpus: %s\n", cpunode->name);
+			continue;
+		}
+
+		if (reg == NULL || *reg > 2) {
+			cpc925_printk(KERN_ERR, "Bad reg value at %s\n", cpunode->full_name);
+			continue;
+		}
+
+		mask &= ~APIMASK_ADI(*reg);
+	}
+
+	if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) {
+		/* We assume that each CPU sits on it's own PI and that
+		 * for present CPUs the reg property equals to the PI
+		 * interface id */
+		cpc925_printk(KERN_WARNING,
+				"Assuming PI id is equal to CPU MPIC id!\n");
+	}
+
+	of_node_put(cpunode);
+	of_node_put(cpus);
+
+	return mask;
+}
+
 /* Enable CPU Errors detection */
 static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
 {
 	u32 apimask;
+	u32 cpumask;
 
 	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
-	if ((apimask & CPU_MASK_ENABLE) == 0) {
-		apimask |= CPU_MASK_ENABLE;
-		__raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
+
+	cpumask = cpc925_cpu_mask_disabled();
+	if (apimask & cpumask) {
+		cpc925_printk(KERN_WARNING, "CPU(s) not present, "
+				"but enabled in APIMASK, disabling\n");
+		apimask &= ~cpumask;
 	}
+
+	if ((apimask & CPU_MASK_ENABLE) == 0)
+		apimask |= CPU_MASK_ENABLE;
+
+	__raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
 }
 
 /* Disable CPU Errors detection */
@@ -622,6 +680,9 @@
 	if ((apiexcp & CPU_EXCP_DETECTED) == 0)
 		return;
 
+	if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0)
+		return;
+
 	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
 	cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
 				 "Processor Interface register dump:\n");
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index a4987e0..73c3e26 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -13,6 +13,7 @@
 #include <linux/kobject.h>
 #include <linux/sysdev.h>
 #include <linux/edac.h>
+#include <linux/module.h>
 #include <asm/mce.h>
 
 #include "mce_amd.h"
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 8af8e864..73464a6 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -1128,7 +1128,7 @@
 	{ .compatible = "fsl,p1020-memory-controller", },
 	{ .compatible = "fsl,p1021-memory-controller", },
 	{ .compatible = "fsl,p2020-memory-controller", },
-	{ .compatible = "fsl,p4080-memory-controller", },
+	{ .compatible = "fsl,qoriq-memory-controller", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 0de7d87..3840096 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -205,7 +205,7 @@
 	.remove			= ppc4xx_edac_remove,
 	.driver = {
 		.owner = THIS_MODULE,
-		.name = PPC4XX_EDAC_MODULE_NAME
+		.name = PPC4XX_EDAC_MODULE_NAME,
 		.of_match_table = ppc4xx_edac_match,
 	},
 };
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 57c3973..0f90e00 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include <asm/byteorder.h>
 
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index bcb1126..153980b 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -585,14 +585,12 @@
 }
 
 /**
- *	dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
+ *	dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
  *	@str: 	Case sensitive Name
  */
 int dmi_name_in_vendors(const char *str)
 {
-	static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
-				DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
-				DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE };
+	static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
 	int i;
 	for (i = 0; fields[i] != DMI_NONE; i++) {
 		int f = fields[i];
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index f1b7f65..e229576 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -151,7 +151,8 @@
 		p += scnprintf(p, left, "\tbase_address: %x\n",
 			     info->params.interface_path.isa.base_address);
 	} else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
-		   !strncmp(info->params.host_bus_type, "PCI", 3)) {
+		   !strncmp(info->params.host_bus_type, "PCI", 3) ||
+		   !strncmp(info->params.host_bus_type, "XPRS", 4)) {
 		p += scnprintf(p, left,
 			     "\t%02x:%02x.%d  channel: %u\n",
 			     info->params.interface_path.pci.bus,
@@ -159,7 +160,6 @@
 			     info->params.interface_path.pci.function,
 			     info->params.interface_path.pci.channel);
 	} else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
-		   !strncmp(info->params.host_bus_type, "XPRS", 4) ||
 		   !strncmp(info->params.host_bus_type, "HTPT", 4)) {
 		p += scnprintf(p, left,
 			     "\tTBD: %llx\n",
@@ -668,7 +668,7 @@
 {
 	struct edd_info *info = edd_dev_get_info(edev);
 
-	if (edd_dev_is_type(edev, "PCI")) {
+	if (edd_dev_is_type(edev, "PCI") || edd_dev_is_type(edev, "XPRS")) {
 		return pci_get_bus_and_slot(info->params.interface_path.pci.bus,
 				     PCI_DEVFN(info->params.interface_path.pci.slot,
 					       info->params.interface_path.pci.
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index 8370f72..b0a8117 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -457,7 +457,8 @@
 }
 
 static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type,
-			       struct timespec *timespec, struct pstore_info *psi)
+			       struct timespec *timespec,
+			       char **buf, struct pstore_info *psi)
 {
 	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
 	struct efivars *efivars = psi->data;
@@ -478,7 +479,11 @@
 				timespec->tv_nsec = 0;
 				get_var_data_locked(efivars, &efivars->walk_entry->var);
 				size = efivars->walk_entry->var.DataSize;
-				memcpy(psi->buf, efivars->walk_entry->var.Data, size);
+				*buf = kmalloc(size, GFP_KERNEL);
+				if (*buf == NULL)
+					return -ENOMEM;
+				memcpy(*buf, efivars->walk_entry->var.Data,
+				       size);
 				efivars->walk_entry = list_entry(efivars->walk_entry->list.next,
 					           struct efivar_entry, list);
 				return size;
@@ -576,7 +581,8 @@
 }
 
 static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type,
-			       struct timespec *time, struct pstore_info *psi)
+			       struct timespec *timespec,
+			       char **buf, struct pstore_info *psi)
 {
 	return -1;
 }
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index aa83de9..c4e7c59 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -27,6 +27,7 @@
 #include <linux/kdebug.h>
 #include <linux/reboot.h>
 #include <linux/efi.h>
+#include <linux/module.h>
 
 #define GSMI_SHUTDOWN_CLEAN	0	/* Clean Shutdown */
 /* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c
index f10fc52..1eedb6f 100644
--- a/drivers/firmware/sigma.c
+++ b/drivers/firmware/sigma.c
@@ -14,13 +14,34 @@
 #include <linux/module.h>
 #include <linux/sigma.h>
 
-/* Return: 0==OK, <0==error, =1 ==no more actions */
-static int
-process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw)
+static size_t sigma_action_size(struct sigma_action *sa)
 {
-	struct sigma_action *sa = (void *)(ssfw->fw->data + ssfw->pos);
+	size_t payload = 0;
+
+	switch (sa->instr) {
+	case SIGMA_ACTION_WRITEXBYTES:
+	case SIGMA_ACTION_WRITESINGLE:
+	case SIGMA_ACTION_WRITESAFELOAD:
+		payload = sigma_action_len(sa);
+		break;
+	default:
+		break;
+	}
+
+	payload = ALIGN(payload, 2);
+
+	return payload + sizeof(struct sigma_action);
+}
+
+/*
+ * Returns a negative error value in case of an error, 0 if processing of
+ * the firmware should be stopped after this action, 1 otherwise.
+ */
+static int
+process_sigma_action(struct i2c_client *client, struct sigma_action *sa)
+{
 	size_t len = sigma_action_len(sa);
-	int ret = 0;
+	int ret;
 
 	pr_debug("%s: instr:%i addr:%#x len:%zu\n", __func__,
 		sa->instr, sa->addr, len);
@@ -29,44 +50,50 @@
 	case SIGMA_ACTION_WRITEXBYTES:
 	case SIGMA_ACTION_WRITESINGLE:
 	case SIGMA_ACTION_WRITESAFELOAD:
-		if (ssfw->fw->size < ssfw->pos + len)
-			return -EINVAL;
 		ret = i2c_master_send(client, (void *)&sa->addr, len);
 		if (ret < 0)
 			return -EINVAL;
 		break;
-
 	case SIGMA_ACTION_DELAY:
-		ret = 0;
 		udelay(len);
 		len = 0;
 		break;
-
 	case SIGMA_ACTION_END:
-		return 1;
-
+		return 0;
 	default:
 		return -EINVAL;
 	}
 
-	/* when arrive here ret=0 or sent data */
-	ssfw->pos += sigma_action_size(sa, len);
-	return ssfw->pos == ssfw->fw->size;
+	return 1;
 }
 
 static int
 process_sigma_actions(struct i2c_client *client, struct sigma_firmware *ssfw)
 {
-	pr_debug("%s: processing %p\n", __func__, ssfw);
+	struct sigma_action *sa;
+	size_t size;
+	int ret;
 
-	while (1) {
-		int ret = process_sigma_action(client, ssfw);
+	while (ssfw->pos + sizeof(*sa) <= ssfw->fw->size) {
+		sa = (struct sigma_action *)(ssfw->fw->data + ssfw->pos);
+
+		size = sigma_action_size(sa);
+		ssfw->pos += size;
+		if (ssfw->pos > ssfw->fw->size || size == 0)
+			break;
+
+		ret = process_sigma_action(client, sa);
+
 		pr_debug("%s: action returned %i\n", __func__, ret);
-		if (ret == 1)
-			return 0;
-		else if (ret)
+
+		if (ret <= 0)
 			return ret;
 	}
+
+	if (ssfw->pos != ssfw->fw->size)
+		return -EINVAL;
+
+	return 0;
 }
 
 int process_sigma_firmware(struct i2c_client *client, const char *name)
@@ -89,16 +116,24 @@
 
 	/* then verify the header */
 	ret = -EINVAL;
-	if (fw->size < sizeof(*ssfw_head))
+
+	/*
+	 * Reject too small or unreasonable large files. The upper limit has been
+	 * chosen a bit arbitrarily, but it should be enough for all practical
+	 * purposes and having the limit makes it easier to avoid integer
+	 * overflows later in the loading process.
+	 */
+	if (fw->size < sizeof(*ssfw_head) || fw->size >= 0x4000000)
 		goto done;
 
 	ssfw_head = (void *)fw->data;
 	if (memcmp(ssfw_head->magic, SIGMA_MAGIC, ARRAY_SIZE(ssfw_head->magic)))
 		goto done;
 
-	crc = crc32(0, fw->data, fw->size);
+	crc = crc32(0, fw->data + sizeof(*ssfw_head),
+			fw->size - sizeof(*ssfw_head));
 	pr_debug("%s: crc=%x\n", __func__, crc);
-	if (crc != ssfw_head->crc)
+	if (crc != le32_to_cpu(ssfw_head->crc))
 		goto done;
 
 	ssfw.pos = sizeof(*ssfw_head);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index cb0bd07..8482a23 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,14 +95,18 @@
 	depends on ARCH_EP93XX
 	select GPIO_GENERIC
 
-config GPIO_EXYNOS4
-	def_bool y
-	depends on CPU_EXYNOS4210
-
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
 
+config GPIO_MPC8XXX
+	bool "MPC512x/MPC8xxx GPIO support"
+	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+		   FSL_SOC_BOOKE || PPC_86xx
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
 config GPIO_MSM_V1
 	tristate "Qualcomm MSM GPIO v1"
 	depends on GPIOLIB && ARCH_MSM
@@ -131,18 +135,6 @@
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
-config GPIO_PLAT_SAMSUNG
-	def_bool y
-	depends on SAMSUNG_GPIOLIB_4BIT
-
-config GPIO_S5PC100
-	def_bool y
-	depends on CPU_S5PC100
-
-config GPIO_S5PV210
-	def_bool y
-	depends on CPU_S5PV210
-
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
@@ -189,7 +181,7 @@
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on MFD_SUPPORT && PCI
+	depends on PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -428,7 +420,6 @@
 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
 	depends on PCI
-	select MFD_SUPPORT
 	select MFD_CORE
 	select MFD_RDC321X
 	help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 19c5d27..dbcb0bc 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,7 +16,6 @@
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
-obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_MACH_KS8695)	+= gpio-ks8695.o
@@ -30,6 +29,7 @@
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
 obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
@@ -42,10 +42,7 @@
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_PLAT_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
-
-obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
-obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
-obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
+obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index ff525c0..a31ad6f 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -15,6 +15,7 @@
 #include <linux/spi/74x164.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct gen_74x164_chip {
 	struct spi_device	*spi;
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 7aafbb4..1c0fc37 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -15,6 +15,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
deleted file mode 100644
index d24b337..0000000
--- a/drivers/gpio/gpio-exynos4.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * EXYNOS4 - GPIOlib support
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	if (pull == S3C_GPIO_PULL_UP)
-		pull = 3;
-
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
-						unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-	if (pull == 3)
-		pull = S3C_GPIO_PULL_UP;
-
-	return pull;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPA0(0),
-			.ngpio	= EXYNOS4_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPA1(0),
-			.ngpio	= EXYNOS4_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPB(0),
-			.ngpio	= EXYNOS4_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC0(0),
-			.ngpio	= EXYNOS4_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC1(0),
-			.ngpio	= EXYNOS4_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD0(0),
-			.ngpio	= EXYNOS4_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD1(0),
-			.ngpio	= EXYNOS4_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE0(0),
-			.ngpio	= EXYNOS4_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE1(0),
-			.ngpio	= EXYNOS4_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE2(0),
-			.ngpio	= EXYNOS4_GPIO_E2_NR,
-			.label	= "GPE2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE3(0),
-			.ngpio	= EXYNOS4_GPIO_E3_NR,
-			.label	= "GPE3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE4(0),
-			.ngpio	= EXYNOS4_GPIO_E4_NR,
-			.label	= "GPE4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF0(0),
-			.ngpio	= EXYNOS4_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF1(0),
-			.ngpio	= EXYNOS4_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF2(0),
-			.ngpio	= EXYNOS4_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF3(0),
-			.ngpio	= EXYNOS4_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPJ0(0),
-			.ngpio	= EXYNOS4_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPJ1(0),
-			.ngpio	= EXYNOS4_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK0(0),
-			.ngpio	= EXYNOS4_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK1(0),
-			.ngpio	= EXYNOS4_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK2(0),
-			.ngpio	= EXYNOS4_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK3(0),
-			.ngpio	= EXYNOS4_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL0(0),
-			.ngpio	= EXYNOS4_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL1(0),
-			.ngpio	= EXYNOS4_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL2(0),
-			.ngpio	= EXYNOS4_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY0(0),
-			.ngpio	= EXYNOS4_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY1(0),
-			.ngpio	= EXYNOS4_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY2(0),
-			.ngpio	= EXYNOS4_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY3(0),
-			.ngpio	= EXYNOS4_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY4(0),
-			.ngpio	= EXYNOS4_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY5(0),
-			.ngpio	= EXYNOS4_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY6(0),
-			.ngpio	= EXYNOS4_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS4_GPX0(0),
-			.ngpio	= EXYNOS4_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS4_GPX1(0),
-			.ngpio	= EXYNOS4_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS4_GPX2(0),
-			.ngpio	= EXYNOS4_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS4_GPX3(0),
-			.ngpio	= EXYNOS4_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPZ(0),
-			.ngpio	= EXYNOS4_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int i;
-	int group = 0;
-	int nr_chips;
-
-	/* GPIO part 1 */
-
-	chip = exynos4_gpio_part1_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
-	/* GPIO part 2 */
-
-	chip = exynos4_gpio_part2_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
-	/* GPIO part 3 */
-
-	chip = exynos4_gpio_part3_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
-	s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
-	return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index b3b4652..2de57ce 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -26,6 +26,7 @@
 #include <linux/spi/mc33880.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "mc33880"
 
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 1ef46e6..c5d83a8 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 3aa6bee..ea8e738 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -14,6 +14,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c
index 52d3ed2..2c7cef3 100644
--- a/drivers/gpio/gpio-mpc5200.c
+++ b/drivers/gpio/gpio-mpc5200.c
@@ -23,6 +23,7 @@
 #include <linux/of_gpio.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>
+#include <linux/module.h>
 
 #include <asm/gpio.h>
 #include <asm/mpc52xx.h>
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/drivers/gpio/gpio-mpc8xxx.c
similarity index 97%
rename from arch/powerpc/sysdev/mpc8xxx_gpio.c
rename to drivers/gpio/gpio-mpc8xxx.c
index fb4963a..ec3fcf0 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -146,6 +146,7 @@
 static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
 	unsigned int mask;
 
@@ -153,6 +154,7 @@
 	if (mask)
 		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
 						     32 - ffs(mask)));
+	chip->irq_eoi(&desc->irq_data);
 }
 
 static void mpc8xxx_irq_unmask(struct irq_data *d)
@@ -310,6 +312,7 @@
 	{ .compatible = "fsl,mpc8572-gpio", },
 	{ .compatible = "fsl,mpc8610-gpio", },
 	{ .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
+	{ .compatible = "fsl,pq3-gpio",     },
 	{ .compatible = "fsl,qoriq-gpio",   },
 	{}
 };
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index b81c989..e791476 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -29,6 +29,7 @@
 #include <linux/basic_mmio_gpio.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 #include <asm-generic/bug.h>
 #include <asm/mach/irq.h>
 
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 292b504..385c58e 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/basic_mmio_gpio.h>
+#include <linux/module.h>
 #include <mach/mxs.h>
 
 #define MXS_SET		0x4
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0e49d87..0b05629 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -148,13 +148,17 @@
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
-#define MOD_REG_BIT(reg, bit_mask, set)	\
-do {	\
-	int l = __raw_readl(base + reg); \
-	if (set) l |= bit_mask; \
-	else l &= ~bit_mask; \
-	__raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+	int l = __raw_readl(base + reg);
+
+	if (set) 
+		l |= mask;
+	else
+		l &= ~mask;
+
+	__raw_writel(l, base + reg);
+}
 
 /**
  * _set_gpio_debounce - low level gpio debounce time
@@ -210,28 +214,28 @@
 	u32 gpio_bit = 1 << gpio;
 
 	if (cpu_is_omap44xx()) {
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	} else {
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (cpu_is_omap44xx()) {
-			MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
-				trigger != 0);
+			_gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+				  trigger != 0);
 		} else {
 			/*
 			 * GPIO wakeup request can only be generated on edge
@@ -1086,6 +1090,11 @@
 
 	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
 				    handle_simple_irq);
+	if (!gc) {
+		dev_err(bank->dev, "Memory alloc failed for gc\n");
+		return;
+	}
+
 	ct = gc->chip_types;
 
 	/* NOTE: No ack required, reading IRQ status clears it. */
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 0550dcb..d3f3e8f 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -546,7 +546,7 @@
  * Translate OpenFirmware node properties into platform_data
  * WARNING: This is DEPRECATED and will be removed eventually!
  */
-void
+static void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	struct device_node *node;
@@ -574,7 +574,7 @@
 		*invert = *val;
 }
 #else
-void
+static void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	*gpio_base = -1;
@@ -596,9 +596,6 @@
 
 	/* set platform specific polarity inversion */
 	ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
-	if (ret)
-		goto out;
-	return 0;
 out:
 	return ret;
 }
@@ -640,7 +637,7 @@
 	struct pca953x_platform_data *pdata;
 	struct pca953x_chip *chip;
 	int irq_base=0, invert=0;
-	int ret = 0;
+	int ret;
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -673,10 +670,10 @@
 	pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
 
 	if (chip->chip_type == PCA953X_TYPE)
-		device_pca953x_init(chip, invert);
-	else if (chip->chip_type == PCA957X_TYPE)
-		device_pca957x_init(chip, invert);
+		ret = device_pca953x_init(chip, invert);
 	else
+		ret = device_pca957x_init(chip, invert);
+	if (ret)
 		goto out_failed;
 
 	ret = pca953x_irq_setup(chip, id, irq_base);
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 7369fdd..3e1f1ec 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
+#include <linux/module.h>
 
 
 static const struct i2c_device_id pcf857x_id[] = {
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 1e8a4a5..a6008e1 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -14,6 +14,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/gpio.h>
diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c
deleted file mode 100644
index ef67f19..0000000
--- a/drivers/gpio/gpio-plat-samsung.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
-				      unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + GPIOCON_OFF);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, base + GPIOCON_OFF);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned con_offset = offset;
-
-	if (con_offset > 7)
-		con_offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit2(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s3c_gpiolib_add(chip);
-}
diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c
deleted file mode 100644
index 7f87b0c..0000000
--- a/drivers/gpio/gpio-s5pc100.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * S5PC100 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
-	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-	int gpioint_group = 0;
-	int i;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PC100_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c
deleted file mode 100644
index eb12f16..0000000
--- a/drivers/gpio/gpio-s5pv210.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * S5PV210 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
-	{
-		.chip	= {
-			.base	= S5PV210_GPA0(0),
-			.ngpio	= S5PV210_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPA1(0),
-			.ngpio	= S5PV210_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPB(0),
-			.ngpio	= S5PV210_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC0(0),
-			.ngpio	= S5PV210_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC1(0),
-			.ngpio	= S5PV210_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD0(0),
-			.ngpio	= S5PV210_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD1(0),
-			.ngpio	= S5PV210_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE0(0),
-			.ngpio	= S5PV210_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE1(0),
-			.ngpio	= S5PV210_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF0(0),
-			.ngpio	= S5PV210_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF1(0),
-			.ngpio	= S5PV210_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF2(0),
-			.ngpio	= S5PV210_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF3(0),
-			.ngpio	= S5PV210_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG0(0),
-			.ngpio	= S5PV210_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG1(0),
-			.ngpio	= S5PV210_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG2(0),
-			.ngpio	= S5PV210_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG3(0),
-			.ngpio	= S5PV210_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_GPI(0),
-			.ngpio	= S5PV210_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ0(0),
-			.ngpio	= S5PV210_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ1(0),
-			.ngpio	= S5PV210_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ2(0),
-			.ngpio	= S5PV210_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ3(0),
-			.ngpio	= S5PV210_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ4(0),
-			.ngpio	= S5PV210_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP01(0),
-			.ngpio	= S5PV210_GPIO_MP01_NR,
-			.label	= "MP01",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP02(0),
-			.ngpio	= S5PV210_GPIO_MP02_NR,
-			.label	= "MP02",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP03(0),
-			.ngpio	= S5PV210_GPIO_MP03_NR,
-			.label	= "MP03",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP04(0),
-			.ngpio	= S5PV210_GPIO_MP04_NR,
-			.label	= "MP04",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP05(0),
-			.ngpio	= S5PV210_GPIO_MP05_NR,
-			.label	= "MP05",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PV210_GPH0(0),
-			.ngpio	= S5PV210_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PV210_GPH1(0),
-			.ngpio	= S5PV210_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PV210_GPH2(0),
-			.ngpio	= S5PV210_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PV210_GPH3(0),
-			.ngpio	= S5PV210_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
-	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
-	int gpioint_group = 0;
-	int i = 0;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PV210_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
new file mode 100644
index 0000000..8662518
--- /dev/null
+++ b/drivers/gpio/gpio-samsung.c
@@ -0,0 +1,2712 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-fns.h>
+#include <plat/pm.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	if (pull == S3C_GPIO_PULL_UP)
+		pull = 3;
+
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	if (pull == 3)
+		pull = S3C_GPIO_PULL_UP;
+
+	return pull;
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+#endif
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg exynos4_gpio_cfg = {
+	.set_pull	= exynos4_gpio_setpull,
+	.get_pull	= exynos4_gpio_getpull,
+	.set_config	= samsung_gpio_setcfg_4bit,
+	.get_config	= samsung_gpio_getcfg_4bit,
+};
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
+	.cfg_eint	= 0x3,
+	.set_config	= s5p64x0_gpio_setcfg_rbank,
+	.get_config	= samsung_gpio_getcfg_4bit,
+	.set_pull	= samsung_gpio_setpull_updown,
+	.get_pull	= samsung_gpio_getpull_updown,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0x0,
+	}, {
+		.cfg_eint	= 0x3,
+	}, {
+		.cfg_eint	= 0x7,
+	}, {
+		.cfg_eint	= 0xF,
+	}, {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+#endif
+
+/* The next set of routines are for the case of s5p64x0 bank r */
+
+static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
+					     int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
+		chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
+
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4)
+		return IRQ_EINT0 + offset;
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 24,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 11,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ */
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P64X0_GPG_BASE,
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	8	4Bit	Yes	None
+ * F	2	2Bit	Yes	None
+ * G	14	4Bit[2]	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	5	4Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	11	2Bit	Yes	8
+ * Q	14	2Bit	Yes	None
+ * R	15	4Bit[2]	Yes	None
+ * S	8	2Bit	Yes	None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.chip	= {
+			.base	= S5P6450_GPA(0),
+			.ngpio	= S5P6450_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPB(0),
+			.ngpio	= S5P6450_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPC(0),
+			.ngpio	= S5P6450_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPD(0),
+			.ngpio	= S5P6450_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5P6450_GPK_BASE,
+		.chip	= {
+			.base	= S5P6450_GPK(0),
+			.ngpio	= S5P6450_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPG_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPG(0),
+			.ngpio	= S5P6450_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPH(0),
+			.ngpio	= S5P6450_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6450_GPR(0),
+			.ngpio	= S5P6450_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPF(0),
+			.ngpio	= S5P6450_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPI(0),
+			.ngpio	= S5P6450_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPJ(0),
+			.ngpio	= S5P6450_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPN(0),
+			.ngpio	= S5P6450_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPP(0),
+			.ngpio	= S5P6450_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S5P6450_GPQ_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPQ(0),
+			.ngpio	= S5P6450_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S5P6450_GPS_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPS(0),
+			.ngpio	= S5P6450_GPIO_S_NR,
+			.label	= "GPS",
+		},
+	},
+#endif
+};
+
+/*
+ * S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PC100
+	{
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in S5PV210/S5PC110
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PV210
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in EXYNOS4210
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip exynos4_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPA0(0),
+			.ngpio	= EXYNOS4_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPA1(0),
+			.ngpio	= EXYNOS4_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPB(0),
+			.ngpio	= EXYNOS4_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC0(0),
+			.ngpio	= EXYNOS4_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC1(0),
+			.ngpio	= EXYNOS4_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD0(0),
+			.ngpio	= EXYNOS4_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD1(0),
+			.ngpio	= EXYNOS4_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE0(0),
+			.ngpio	= EXYNOS4_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE1(0),
+			.ngpio	= EXYNOS4_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE2(0),
+			.ngpio	= EXYNOS4_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE3(0),
+			.ngpio	= EXYNOS4_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE4(0),
+			.ngpio	= EXYNOS4_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF0(0),
+			.ngpio	= EXYNOS4_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF1(0),
+			.ngpio	= EXYNOS4_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF2(0),
+			.ngpio	= EXYNOS4_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF3(0),
+			.ngpio	= EXYNOS4_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPJ0(0),
+			.ngpio	= EXYNOS4_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPJ1(0),
+			.ngpio	= EXYNOS4_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK0(0),
+			.ngpio	= EXYNOS4_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK1(0),
+			.ngpio	= EXYNOS4_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK2(0),
+			.ngpio	= EXYNOS4_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK3(0),
+			.ngpio	= EXYNOS4_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL0(0),
+			.ngpio	= EXYNOS4_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL1(0),
+			.ngpio	= EXYNOS4_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL2(0),
+			.ngpio	= EXYNOS4_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY0(0),
+			.ngpio	= EXYNOS4_GPIO_Y0_NR,
+			.label	= "GPY0",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY1(0),
+			.ngpio	= EXYNOS4_GPIO_Y1_NR,
+			.label	= "GPY1",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY2(0),
+			.ngpio	= EXYNOS4_GPIO_Y2_NR,
+			.label	= "GPY2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY3(0),
+			.ngpio	= EXYNOS4_GPIO_Y3_NR,
+			.label	= "GPY3",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY4(0),
+			.ngpio	= EXYNOS4_GPIO_Y4_NR,
+			.label	= "GPY4",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY5(0),
+			.ngpio	= EXYNOS4_GPIO_Y5_NR,
+			.label	= "GPY5",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY6(0),
+			.ngpio	= EXYNOS4_GPIO_Y6_NR,
+			.label	= "GPY6",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC00),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= EXYNOS4_GPX0(0),
+			.ngpio	= EXYNOS4_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC20),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= EXYNOS4_GPX1(0),
+			.ngpio	= EXYNOS4_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC40),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= EXYNOS4_GPX2(0),
+			.ngpio	= EXYNOS4_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC60),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= EXYNOS4_GPX3(0),
+			.ngpio	= EXYNOS4_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPZ(0),
+			.ngpio	= EXYNOS4_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	struct samsung_gpio_chip *chip;
+	int i, nr_chips;
+	int group = 0;
+
+	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+
+	if (soc_is_s3c24xx()) {
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	} else if (soc_is_s5p6440()) {
+		samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
+				ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
+				ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
+				ARRAY_SIZE(s5p6440_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
+				ARRAY_SIZE(s5p6440_gpios_rbank));
+	} else if (soc_is_s5p6450()) {
+		samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
+				ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
+				ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
+				ARRAY_SIZE(s5p6450_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
+				ARRAY_SIZE(s5p6450_gpios_rbank));
+	} else if (soc_is_s5pc100()) {
+		group = 0;
+		chip = s5pc100_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_s5pv210()) {
+		group = 0;
+		chip = s5pv210_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_exynos4210()) {
+		group = 0;
+
+		/* gpio part1 */
+		chip = exynos4_gpios_1;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_1);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+
+		/* gpio part2 */
+		chip = exynos4_gpios_2;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_2);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+
+		/* gpio part3 */
+		chip = exynos4_gpios_3;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_3);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+
+#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+#endif
+	} else {
+		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+/* gpiolib wrappers until these are totally eliminated */
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	int ret;
+
+	WARN_ON(to);	/* should be none of these left */
+
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
+
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
+}
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	/* do this via gpiolib until all users removed */
+
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
+}
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+
+	return __raw_readl(chip->base + 0x04) & (1 << offs);
+}
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif	/* CONFIG_S5P_GPIO_DRVSTR */
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 846fbd5..0ce6ac9 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -14,6 +14,7 @@
 
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 785127c..1368826 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -9,7 +9,6 @@
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
 	select I2C
 	select I2C_ALGOBIT
-	select SLOW_WORK
 	help
 	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
 	  introduced in XFree86 4.0. If you say Y here, you need to select
@@ -96,6 +95,7 @@
 	select FB_CFB_IMAGEBLIT
 	# i915 depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select BACKLIGHT_LCD_SUPPORT if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select VIDEO_OUTPUT_CONTROL if ACPI
 	select INPUT if ACPI
diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c
index 1c36492..9afe495 100644
--- a/drivers/gpu/drm/ati_pcigart.c
+++ b/drivers/gpu/drm/ati_pcigart.c
@@ -31,6 +31,7 @@
  * DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "drmP.h"
 
 # define ATI_PCIGART_PAGE_SIZE		4096	/**< PCI GART page size */
diff --git a/drivers/gpu/drm/drm_buffer.c b/drivers/gpu/drm/drm_buffer.c
index 529a0db..08ccefe 100644
--- a/drivers/gpu/drm/drm_buffer.c
+++ b/drivers/gpu/drm/drm_buffer.c
@@ -32,6 +32,7 @@
  * Pauli Nieminen <suokkos-at-gmail-dot-com>
  */
 
+#include <linux/export.h>
 #include "drm_buffer.h"
 
 /**
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 61e1ef9..30372f7 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -36,6 +36,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/log2.h>
+#include <linux/export.h>
 #include <asm/shmparam.h>
 #include "drmP.h"
 
diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c
index 0e3bd5b..5928653 100644
--- a/drivers/gpu/drm/drm_cache.c
+++ b/drivers/gpu/drm/drm_cache.c
@@ -28,6 +28,7 @@
  * Authors: Thomas Hellström <thomas-at-tungstengraphics-dot-com>
  */
 
+#include <linux/export.h>
 #include "drmP.h"
 
 #if defined(CONFIG_X86)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index fe738f0..8323fc3 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -31,6 +31,7 @@
  */
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drm.h"
 #include "drmP.h"
 #include "drm_crtc.h"
@@ -162,6 +163,7 @@
 	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
 	{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
 	{ DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
+	{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual", 0},
 };
 
 static struct drm_prop_enum_list drm_encoder_enum_list[] =
@@ -170,6 +172,7 @@
 	{ DRM_MODE_ENCODER_TMDS, "TMDS" },
 	{ DRM_MODE_ENCODER_LVDS, "LVDS" },
 	{ DRM_MODE_ENCODER_TVDAC, "TV" },
+	{ DRM_MODE_ENCODER_VIRTUAL, "Virtual" },
 };
 
 char *drm_get_encoder_name(struct drm_encoder *encoder)
@@ -463,8 +466,10 @@
 	list_add_tail(&connector->head, &dev->mode_config.connector_list);
 	dev->mode_config.num_connector++;
 
-	drm_connector_attach_property(connector,
-				      dev->mode_config.edid_property, 0);
+	if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+		drm_connector_attach_property(connector,
+					      dev->mode_config.edid_property,
+					      0);
 
 	drm_connector_attach_property(connector,
 				      dev->mode_config.dpms_property, 0);
@@ -1868,6 +1873,10 @@
 	}
 
 	if (num_clips && clips_ptr) {
+		if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
+			ret = -EINVAL;
+			goto out_err1;
+		}
 		clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
 		if (!clips) {
 			ret = -ENOMEM;
@@ -2113,8 +2122,10 @@
 	property->num_values = num_values;
 	INIT_LIST_HEAD(&property->enum_blob_list);
 
-	if (name)
+	if (name) {
 		strncpy(property->name, name, DRM_PROP_NAME_LEN);
+		property->name[DRM_PROP_NAME_LEN-1] = '\0';
+	}
 
 	list_add_tail(&property->head, &dev->mode_config.property_list);
 	return property;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index f236644..d2619d7 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -29,6 +29,9 @@
  *      Jesse Barnes <jesse.barnes@intel.com>
  */
 
+#include <linux/export.h>
+#include <linux/moduleparam.h>
+
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
@@ -453,6 +456,30 @@
 EXPORT_SYMBOL(drm_crtc_helper_set_mode);
 
 
+static int
+drm_crtc_helper_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+
+	/* Decouple all encoders and their attached connectors from this crtc */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (encoder->crtc != crtc)
+			continue;
+
+		list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+			if (connector->encoder != encoder)
+				continue;
+
+			connector->encoder = NULL;
+		}
+	}
+
+	drm_helper_disable_unused_functions(dev);
+	return 0;
+}
+
 /**
  * drm_crtc_helper_set_config - set a new config from userspace
  * @crtc: CRTC to setup
@@ -481,6 +508,7 @@
 	struct drm_connector *save_connectors, *connector;
 	int count = 0, ro, fail = 0;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_mode_set save_set;
 	int ret = 0;
 	int i;
 
@@ -506,8 +534,7 @@
 				(int)set->num_connectors, set->x, set->y);
 	} else {
 		DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
-		set->mode = NULL;
-		set->num_connectors = 0;
+		return drm_crtc_helper_disable(set->crtc);
 	}
 
 	dev = set->crtc->dev;
@@ -553,6 +580,12 @@
 		save_connectors[count++] = *connector;
 	}
 
+	save_set.crtc = set->crtc;
+	save_set.mode = &set->crtc->mode;
+	save_set.x = set->crtc->x;
+	save_set.y = set->crtc->y;
+	save_set.fb = set->crtc->fb;
+
 	/* We should be able to check here if the fb has the same properties
 	 * and then just flip_or_move it */
 	if (set->crtc->fb != set->fb) {
@@ -718,6 +751,12 @@
 		*connector = save_connectors[count++];
 	}
 
+	/* Try to restore the config */
+	if (mode_changed &&
+	    !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
+				      save_set.y, save_set.fb))
+		DRM_ERROR("failed to restore config after modeset failure\n");
+
 	kfree(save_connectors);
 	kfree(save_encoders);
 	kfree(save_crtcs);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index b9dc262..1c7a1c0 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -33,6 +33,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drmP.h"
 
 #if defined(CONFIG_DEBUG_FS)
@@ -117,7 +118,10 @@
 		tmp->minor = minor;
 		tmp->dent = ent;
 		tmp->info_ent = &files[i];
-		list_add(&(tmp->list), &(minor->debugfs_nodes.list));
+
+		mutex_lock(&minor->debugfs_lock);
+		list_add(&tmp->list, &minor->debugfs_list);
+		mutex_unlock(&minor->debugfs_lock);
 	}
 	return 0;
 
@@ -145,7 +149,8 @@
 	char name[64];
 	int ret;
 
-	INIT_LIST_HEAD(&minor->debugfs_nodes.list);
+	INIT_LIST_HEAD(&minor->debugfs_list);
+	mutex_init(&minor->debugfs_lock);
 	sprintf(name, "%d", minor_id);
 	minor->debugfs_root = debugfs_create_dir(name, root);
 	if (!minor->debugfs_root) {
@@ -191,8 +196,9 @@
 	struct drm_info_node *tmp;
 	int i;
 
+	mutex_lock(&minor->debugfs_lock);
 	for (i = 0; i < count; i++) {
-		list_for_each_safe(pos, q, &minor->debugfs_nodes.list) {
+		list_for_each_safe(pos, q, &minor->debugfs_list) {
 			tmp = list_entry(pos, struct drm_info_node, list);
 			if (tmp->info_ent == &files[i]) {
 				debugfs_remove(tmp->dent);
@@ -201,6 +207,7 @@
 			}
 		}
 	}
+	mutex_unlock(&minor->debugfs_lock);
 	return 0;
 }
 EXPORT_SYMBOL(drm_debugfs_remove_files);
diff --git a/drivers/gpu/drm/drm_dma.c b/drivers/gpu/drm/drm_dma.c
index 252cbd7..cfb4e33 100644
--- a/drivers/gpu/drm/drm_dma.c
+++ b/drivers/gpu/drm/drm_dma.c
@@ -33,6 +33,7 @@
  * OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "drmP.h"
 
 /**
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 7a87e08..40c187c 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -48,6 +48,7 @@
 
 #include <linux/debugfs.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm_core.h"
 
@@ -124,7 +125,7 @@
 	DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 
-	DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0),
+	DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED),
 
 	DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0),
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index fe39c35..3e927ce 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm_edid.h"
 #include "drm_edid_modes.h"
diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c
index d62c064..fb94355 100644
--- a/drivers/gpu/drm/drm_encoder_slave.c
+++ b/drivers/gpu/drm/drm_encoder_slave.c
@@ -24,6 +24,8 @@
  *
  */
 
+#include <linux/module.h>
+
 #include "drm_encoder_slave.h"
 
 /**
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index f7c6854..80fe39d 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -31,6 +31,7 @@
 #include <linux/sysrq.h>
 #include <linux/slab.h>
 #include <linux/fb.h>
+#include <linux/module.h>
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_fb_helper.h"
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 2ec7d48..4911e1d 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -37,6 +37,7 @@
 #include "drmP.h"
 #include <linux/poll.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 /* from BKL pushdown: note that nothing else serializes idr_find() */
 DEFINE_MUTEX(drm_global_mutex);
diff --git a/drivers/gpu/drm/drm_hashtab.c b/drivers/gpu/drm/drm_hashtab.c
index e3a7568..68dc874 100644
--- a/drivers/gpu/drm/drm_hashtab.c
+++ b/drivers/gpu/drm/drm_hashtab.c
@@ -36,6 +36,7 @@
 #include "drm_hashtab.h"
 #include <linux/hash.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
 {
diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index 4a058c7..ddd70db 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -29,6 +29,7 @@
  */
 #include <linux/compat.h>
 #include <linux/ratelimit.h>
+#include <linux/export.h>
 
 #include "drmP.h"
 #include "drm_core.h"
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3830e9e..44a5d0a 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 
 #include <linux/vgaarb.h>
+#include <linux/export.h>
 
 /* Access macro for slots in vblank timestamp ringbuffer. */
 #define vblanktimestamp(dev, crtc, count) ( \
@@ -109,10 +110,7 @@
 	/* Prevent vblank irq processing while disabling vblank irqs,
 	 * so no updates of timestamps or count can happen after we've
 	 * disabled. Needed to prevent races in case of delayed irq's.
-	 * Disable preemption, so vblank_time_lock is held as short as
-	 * possible, even under a kernel with PREEMPT_RT patches.
 	 */
-	preempt_disable();
 	spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
 
 	dev->driver->disable_vblank(dev, crtc);
@@ -163,7 +161,6 @@
 	clear_vblank_timestamps(dev, crtc);
 
 	spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
-	preempt_enable();
 }
 
 static void vblank_disable_fn(unsigned long arg)
@@ -406,13 +403,16 @@
 	/*
 	 * Wake up any waiters so they don't hang.
 	 */
-	spin_lock_irqsave(&dev->vbl_lock, irqflags);
-	for (i = 0; i < dev->num_crtcs; i++) {
-		DRM_WAKEUP(&dev->vbl_queue[i]);
-		dev->vblank_enabled[i] = 0;
-		dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i);
+	if (dev->num_crtcs) {
+		spin_lock_irqsave(&dev->vbl_lock, irqflags);
+		for (i = 0; i < dev->num_crtcs; i++) {
+			DRM_WAKEUP(&dev->vbl_queue[i]);
+			dev->vblank_enabled[i] = 0;
+			dev->last_vblank[i] =
+				dev->driver->get_vblank_counter(dev, i);
+		}
+		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 	}
-	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 
 	if (!irq_enabled)
 		return -EINVAL;
@@ -885,10 +885,6 @@
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
 	/* Going from 0->1 means we have to enable interrupts again */
 	if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
-		/* Disable preemption while holding vblank_time_lock. Do
-		 * it explicitely to guard against PREEMPT_RT kernel.
-		 */
-		preempt_disable();
 		spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
 		if (!dev->vblank_enabled[crtc]) {
 			/* Enable vblank irqs under vblank_time_lock protection.
@@ -908,7 +904,6 @@
 			}
 		}
 		spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
-		preempt_enable();
 	} else {
 		if (!dev->vblank_enabled[crtc]) {
 			atomic_dec(&dev->vblank_refcount[crtc]);
@@ -1124,6 +1119,7 @@
 		trace_drm_vblank_event_delivered(current->pid, pipe,
 						 vblwait->request.sequence);
 	} else {
+		/* drm_handle_vblank_events will call drm_vblank_put */
 		list_add_tail(&e->base.link, &dev->vblank_event_list);
 		vblwait->reply.sequence = vblwait->request.sequence;
 	}
@@ -1204,8 +1200,12 @@
 		goto done;
 	}
 
-	if (flags & _DRM_VBLANK_EVENT)
+	if (flags & _DRM_VBLANK_EVENT) {
+		/* must hold on to the vblank ref until the event fires
+		 * drm_vblank_put will be called asynchronously
+		 */
 		return drm_queue_vblank_event(dev, crtc, vblwait, file_priv);
+	}
 
 	if ((flags & _DRM_VBLANK_NEXTONMISS) &&
 	    (seq - vblwait->request.sequence) <= (1<<23)) {
diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c
index c9b8050..c8b6b66 100644
--- a/drivers/gpu/drm/drm_memory.c
+++ b/drivers/gpu/drm/drm_memory.c
@@ -34,6 +34,7 @@
  */
 
 #include <linux/highmem.h>
+#include <linux/export.h>
 #include "drmP.h"
 
 /**
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 959186c..961fb54 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -45,6 +45,7 @@
 #include "drm_mm.h"
 #include <linux/slab.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 #define MM_UNUSED_TARGET 4
 
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index ad74fb4..fb8e46b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -32,6 +32,7 @@
 
 #include <linux/list.h>
 #include <linux/list_sort.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index b6a19cb..d4d10b7 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -39,6 +39,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include "drmP.h"
 
 /**********************************************************************/
diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c
index 2a8b626..ae9db5e 100644
--- a/drivers/gpu/drm/drm_platform.c
+++ b/drivers/gpu/drm/drm_platform.c
@@ -25,6 +25,7 @@
  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "drmP.h"
 
 /**
diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c
index 0f3c4e3..fff8722 100644
--- a/drivers/gpu/drm/drm_proc.c
+++ b/drivers/gpu/drm/drm_proc.c
@@ -39,6 +39,7 @@
 
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drmP.h"
 
 /***************************************************
diff --git a/drivers/gpu/drm/drm_sman.c b/drivers/gpu/drm/drm_sman.c
index 3466458..cebce45 100644
--- a/drivers/gpu/drm/drm_sman.c
+++ b/drivers/gpu/drm/drm_sman.c
@@ -36,6 +36,7 @@
  * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
  */
 
+#include <linux/export.h>
 #include "drm_sman.h"
 
 struct drm_owner_item {
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 2eee8e0..0f9ef9b 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -16,6 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/gfp.h>
 #include <linux/err.h>
+#include <linux/export.h>
 
 #include "drm_sysfs.h"
 #include "drm_core.h"
diff --git a/drivers/gpu/drm/drm_usb.c b/drivers/gpu/drm/drm_usb.c
index 206d230..445003f 100644
--- a/drivers/gpu/drm/drm_usb.c
+++ b/drivers/gpu/drm/drm_usb.c
@@ -1,5 +1,6 @@
 #include "drmP.h"
 #include <linux/usb.h>
+#include <linux/export.h>
 
 #ifdef CONFIG_USB
 int drm_get_usb_dev(struct usb_interface *interface,
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index 5db96d45..8c03eaf 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -34,6 +34,7 @@
  */
 
 #include "drmP.h"
+#include <linux/export.h>
 #if defined(__ia64__)
 #include <linux/efi.h>
 #include <linux/slab.h>
diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c
index 6f8afea..2bb07bc 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_buf.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c
@@ -27,82 +27,84 @@
 #include "drm.h"
 
 #include "exynos_drm_drv.h"
+#include "exynos_drm_gem.h"
 #include "exynos_drm_buf.h"
 
-static DEFINE_MUTEX(exynos_drm_buf_lock);
-
 static int lowlevel_buffer_allocate(struct drm_device *dev,
-		struct exynos_drm_buf_entry *entry)
+		struct exynos_drm_gem_buf *buffer)
 {
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	entry->vaddr = dma_alloc_writecombine(dev->dev, entry->size,
-			(dma_addr_t *)&entry->paddr, GFP_KERNEL);
-	if (!entry->paddr) {
+	buffer->kvaddr = dma_alloc_writecombine(dev->dev, buffer->size,
+			&buffer->dma_addr, GFP_KERNEL);
+	if (!buffer->kvaddr) {
 		DRM_ERROR("failed to allocate buffer.\n");
 		return -ENOMEM;
 	}
 
-	DRM_DEBUG_KMS("allocated : vaddr(0x%x), paddr(0x%x), size(0x%x)\n",
-			(unsigned int)entry->vaddr, entry->paddr, entry->size);
+	DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n",
+			(unsigned long)buffer->kvaddr,
+			(unsigned long)buffer->dma_addr,
+			buffer->size);
 
 	return 0;
 }
 
 static void lowlevel_buffer_deallocate(struct drm_device *dev,
-		struct exynos_drm_buf_entry *entry)
+		struct exynos_drm_gem_buf *buffer)
 {
 	DRM_DEBUG_KMS("%s.\n", __FILE__);
 
-	if (entry->paddr && entry->vaddr && entry->size)
-		dma_free_writecombine(dev->dev, entry->size, entry->vaddr,
-				entry->paddr);
+	if (buffer->dma_addr && buffer->size)
+		dma_free_writecombine(dev->dev, buffer->size, buffer->kvaddr,
+				(dma_addr_t)buffer->dma_addr);
 	else
-		DRM_DEBUG_KMS("entry data is null.\n");
+		DRM_DEBUG_KMS("buffer data are invalid.\n");
 }
 
-struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev,
+struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev,
 		unsigned int size)
 {
-	struct exynos_drm_buf_entry *entry;
+	struct exynos_drm_gem_buf *buffer;
 
 	DRM_DEBUG_KMS("%s.\n", __FILE__);
+	DRM_DEBUG_KMS("desired size = 0x%x\n", size);
 
-	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
-	if (!entry) {
-		DRM_ERROR("failed to allocate exynos_drm_buf_entry.\n");
+	buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
+	if (!buffer) {
+		DRM_ERROR("failed to allocate exynos_drm_gem_buf.\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
-	entry->size = size;
+	buffer->size = size;
 
 	/*
 	 * allocate memory region with size and set the memory information
-	 * to vaddr and paddr of a entry object.
+	 * to vaddr and dma_addr of a buffer object.
 	 */
-	if (lowlevel_buffer_allocate(dev, entry) < 0) {
-		kfree(entry);
-		entry = NULL;
+	if (lowlevel_buffer_allocate(dev, buffer) < 0) {
+		kfree(buffer);
+		buffer = NULL;
 		return ERR_PTR(-ENOMEM);
 	}
 
-	return entry;
+	return buffer;
 }
 
 void exynos_drm_buf_destroy(struct drm_device *dev,
-		struct exynos_drm_buf_entry *entry)
+		struct exynos_drm_gem_buf *buffer)
 {
 	DRM_DEBUG_KMS("%s.\n", __FILE__);
 
-	if (!entry) {
-		DRM_DEBUG_KMS("entry is null.\n");
+	if (!buffer) {
+		DRM_DEBUG_KMS("buffer is null.\n");
 		return;
 	}
 
-	lowlevel_buffer_deallocate(dev, entry);
+	lowlevel_buffer_deallocate(dev, buffer);
 
-	kfree(entry);
-	entry = NULL;
+	kfree(buffer);
+	buffer = NULL;
 }
 
 MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.h b/drivers/gpu/drm/exynos/exynos_drm_buf.h
index 045d59e..6e91f9c 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_buf.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_buf.h
@@ -26,28 +26,15 @@
 #ifndef _EXYNOS_DRM_BUF_H_
 #define _EXYNOS_DRM_BUF_H_
 
-/*
- * exynos drm buffer entry structure.
- *
- * @paddr: physical address of allocated memory.
- * @vaddr: kernel virtual address of allocated memory.
- * @size: size of allocated memory.
- */
-struct exynos_drm_buf_entry {
-	dma_addr_t paddr;
-	void __iomem *vaddr;
-	unsigned int size;
-};
-
 /* allocate physical memory. */
-struct exynos_drm_buf_entry *exynos_drm_buf_create(struct drm_device *dev,
+struct exynos_drm_gem_buf *exynos_drm_buf_create(struct drm_device *dev,
 		unsigned int size);
 
-/* get physical memory information of a drm framebuffer. */
-struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb);
+/* get memory information of a drm framebuffer. */
+struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb);
 
 /* remove allocated physical memory. */
 void exynos_drm_buf_destroy(struct drm_device *dev,
-		struct exynos_drm_buf_entry *entry);
+		struct exynos_drm_gem_buf *buffer);
 
 #endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c
index 985d9e7..d620b07 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_connector.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c
@@ -37,6 +37,8 @@
 
 struct exynos_drm_connector {
 	struct drm_connector	drm_connector;
+	uint32_t		encoder_id;
+	struct exynos_drm_manager *manager;
 };
 
 /* convert exynos_video_timings to drm_display_mode */
@@ -47,6 +49,7 @@
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
 	mode->clock = timing->pixclock / 1000;
+	mode->vrefresh = timing->refresh;
 
 	mode->hdisplay = timing->xres;
 	mode->hsync_start = mode->hdisplay + timing->left_margin;
@@ -57,6 +60,12 @@
 	mode->vsync_start = mode->vdisplay + timing->upper_margin;
 	mode->vsync_end = mode->vsync_start + timing->vsync_len;
 	mode->vtotal = mode->vsync_end + timing->lower_margin;
+
+	if (timing->vmode & FB_VMODE_INTERLACED)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	if (timing->vmode & FB_VMODE_DOUBLE)
+		mode->flags |= DRM_MODE_FLAG_DBLSCAN;
 }
 
 /* convert drm_display_mode to exynos_video_timings */
@@ -69,7 +78,7 @@
 	memset(timing, 0, sizeof(*timing));
 
 	timing->pixclock = mode->clock * 1000;
-	timing->refresh = mode->vrefresh;
+	timing->refresh = drm_mode_vrefresh(mode);
 
 	timing->xres = mode->hdisplay;
 	timing->left_margin = mode->hsync_start - mode->hdisplay;
@@ -92,15 +101,16 @@
 
 static int exynos_drm_connector_get_modes(struct drm_connector *connector)
 {
-	struct exynos_drm_manager *manager =
-				exynos_drm_get_manager(connector->encoder);
-	struct exynos_drm_display *display = manager->display;
+	struct exynos_drm_connector *exynos_connector =
+					to_exynos_connector(connector);
+	struct exynos_drm_manager *manager = exynos_connector->manager;
+	struct exynos_drm_display_ops *display_ops = manager->display_ops;
 	unsigned int count;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	if (!display) {
-		DRM_DEBUG_KMS("display is null.\n");
+	if (!display_ops) {
+		DRM_DEBUG_KMS("display_ops is null.\n");
 		return 0;
 	}
 
@@ -112,7 +122,7 @@
 	 * P.S. in case of lcd panel, count is always 1 if success
 	 * because lcd panel has only one mode.
 	 */
-	if (display->get_edid) {
+	if (display_ops->get_edid) {
 		int ret;
 		void *edid;
 
@@ -122,7 +132,7 @@
 			return 0;
 		}
 
-		ret = display->get_edid(manager->dev, connector,
+		ret = display_ops->get_edid(manager->dev, connector,
 						edid, MAX_EDID);
 		if (ret < 0) {
 			DRM_ERROR("failed to get edid data.\n");
@@ -140,8 +150,8 @@
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
 		struct fb_videomode *timing;
 
-		if (display->get_timing)
-			timing = display->get_timing(manager->dev);
+		if (display_ops->get_timing)
+			timing = display_ops->get_timing(manager->dev);
 		else {
 			drm_mode_destroy(connector->dev, mode);
 			return 0;
@@ -162,9 +172,10 @@
 static int exynos_drm_connector_mode_valid(struct drm_connector *connector,
 					    struct drm_display_mode *mode)
 {
-	struct exynos_drm_manager *manager =
-				exynos_drm_get_manager(connector->encoder);
-	struct exynos_drm_display *display = manager->display;
+	struct exynos_drm_connector *exynos_connector =
+					to_exynos_connector(connector);
+	struct exynos_drm_manager *manager = exynos_connector->manager;
+	struct exynos_drm_display_ops *display_ops = manager->display_ops;
 	struct fb_videomode timing;
 	int ret = MODE_BAD;
 
@@ -172,8 +183,8 @@
 
 	convert_to_video_timing(&timing, mode);
 
-	if (display && display->check_timing)
-		if (!display->check_timing(manager->dev, (void *)&timing))
+	if (display_ops && display_ops->check_timing)
+		if (!display_ops->check_timing(manager->dev, (void *)&timing))
 			ret = MODE_OK;
 
 	return ret;
@@ -181,9 +192,25 @@
 
 struct drm_encoder *exynos_drm_best_encoder(struct drm_connector *connector)
 {
+	struct drm_device *dev = connector->dev;
+	struct exynos_drm_connector *exynos_connector =
+					to_exynos_connector(connector);
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	return connector->encoder;
+	obj = drm_mode_object_find(dev, exynos_connector->encoder_id,
+				   DRM_MODE_OBJECT_ENCODER);
+	if (!obj) {
+		DRM_DEBUG_KMS("Unknown ENCODER ID %d\n",
+				exynos_connector->encoder_id);
+		return NULL;
+	}
+
+	encoder = obj_to_encoder(obj);
+
+	return encoder;
 }
 
 static struct drm_connector_helper_funcs exynos_connector_helper_funcs = {
@@ -196,15 +223,17 @@
 static enum drm_connector_status
 exynos_drm_connector_detect(struct drm_connector *connector, bool force)
 {
-	struct exynos_drm_manager *manager =
-				exynos_drm_get_manager(connector->encoder);
-	struct exynos_drm_display *display = manager->display;
+	struct exynos_drm_connector *exynos_connector =
+					to_exynos_connector(connector);
+	struct exynos_drm_manager *manager = exynos_connector->manager;
+	struct exynos_drm_display_ops *display_ops =
+					manager->display_ops;
 	enum drm_connector_status status = connector_status_disconnected;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	if (display && display->is_connected) {
-		if (display->is_connected(manager->dev))
+	if (display_ops && display_ops->is_connected) {
+		if (display_ops->is_connected(manager->dev))
 			status = connector_status_connected;
 		else
 			status = connector_status_disconnected;
@@ -251,9 +280,11 @@
 
 	connector = &exynos_connector->drm_connector;
 
-	switch (manager->display->type) {
+	switch (manager->display_ops->type) {
 	case EXYNOS_DISPLAY_TYPE_HDMI:
 		type = DRM_MODE_CONNECTOR_HDMIA;
+		connector->interlace_allowed = true;
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
 		break;
 	default:
 		type = DRM_MODE_CONNECTOR_Unknown;
@@ -267,7 +298,10 @@
 	if (err)
 		goto err_connector;
 
+	exynos_connector->encoder_id = encoder->base.id;
+	exynos_connector->manager = manager;
 	connector->encoder = encoder;
+
 	err = drm_mode_connector_attach_encoder(connector, encoder);
 	if (err) {
 		DRM_ERROR("failed to attach a connector to a encoder\n");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index 9337e5e..ee43cc2 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -29,36 +29,17 @@
 #include "drmP.h"
 #include "drm_crtc_helper.h"
 
+#include "exynos_drm_crtc.h"
 #include "exynos_drm_drv.h"
 #include "exynos_drm_fb.h"
 #include "exynos_drm_encoder.h"
+#include "exynos_drm_gem.h"
 #include "exynos_drm_buf.h"
 
 #define to_exynos_crtc(x)	container_of(x, struct exynos_drm_crtc,\
 				drm_crtc)
 
 /*
- * Exynos specific crtc postion structure.
- *
- * @fb_x: offset x on a framebuffer to be displyed
- *	- the unit is screen coordinates.
- * @fb_y: offset y on a framebuffer to be displayed
- *	- the unit is screen coordinates.
- * @crtc_x: offset x on hardware screen.
- * @crtc_y: offset y on hardware screen.
- * @crtc_w: width of hardware screen.
- * @crtc_h: height of hardware screen.
- */
-struct exynos_drm_crtc_pos {
-	unsigned int fb_x;
-	unsigned int fb_y;
-	unsigned int crtc_x;
-	unsigned int crtc_y;
-	unsigned int crtc_w;
-	unsigned int crtc_h;
-};
-
-/*
  * Exynos specific crtc structure.
  *
  * @drm_crtc: crtc object.
@@ -85,30 +66,31 @@
 
 	exynos_drm_fn_encoder(crtc, overlay,
 			exynos_drm_encoder_crtc_mode_set);
-	exynos_drm_fn_encoder(crtc, NULL, exynos_drm_encoder_crtc_commit);
+	exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe,
+			exynos_drm_encoder_crtc_commit);
 }
 
-static int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay,
-				       struct drm_framebuffer *fb,
-				       struct drm_display_mode *mode,
-				       struct exynos_drm_crtc_pos *pos)
+int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay,
+			      struct drm_framebuffer *fb,
+			      struct drm_display_mode *mode,
+			      struct exynos_drm_crtc_pos *pos)
 {
-	struct exynos_drm_buf_entry *entry;
+	struct exynos_drm_gem_buf *buffer;
 	unsigned int actual_w;
 	unsigned int actual_h;
 
-	entry = exynos_drm_fb_get_buf(fb);
-	if (!entry) {
-		DRM_LOG_KMS("entry is null.\n");
+	buffer = exynos_drm_fb_get_buf(fb);
+	if (!buffer) {
+		DRM_LOG_KMS("buffer is null.\n");
 		return -EFAULT;
 	}
 
-	overlay->paddr = entry->paddr;
-	overlay->vaddr = entry->vaddr;
+	overlay->dma_addr = buffer->dma_addr;
+	overlay->vaddr = buffer->kvaddr;
 
-	DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n",
+	DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n",
 			(unsigned long)overlay->vaddr,
-			(unsigned long)overlay->paddr);
+			(unsigned long)overlay->dma_addr);
 
 	actual_w = min((mode->hdisplay - pos->crtc_x), pos->crtc_w);
 	actual_h = min((mode->vdisplay - pos->crtc_y), pos->crtc_h);
@@ -171,9 +153,26 @@
 
 static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
-	DRM_DEBUG_KMS("%s\n", __FILE__);
+	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
 
-	/* TODO */
+	DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe,
+				exynos_drm_encoder_crtc_commit);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		/* TODO */
+		exynos_drm_fn_encoder(crtc, NULL,
+				exynos_drm_encoder_crtc_disable);
+		break;
+	default:
+		DRM_DEBUG_KMS("unspecified mode %d\n", mode);
+		break;
+	}
 }
 
 static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
@@ -185,9 +184,12 @@
 
 static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
 {
+	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	/* drm framework doesn't check NULL. */
+	exynos_drm_fn_encoder(crtc, &exynos_crtc->pipe,
+			exynos_drm_encoder_crtc_commit);
 }
 
 static bool
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.h b/drivers/gpu/drm/exynos/exynos_drm_crtc.h
index c584042..25f72a6 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.h
@@ -35,4 +35,29 @@
 int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int crtc);
 void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int crtc);
 
+/*
+ * Exynos specific crtc postion structure.
+ *
+ * @fb_x: offset x on a framebuffer to be displyed
+ *	- the unit is screen coordinates.
+ * @fb_y: offset y on a framebuffer to be displayed
+ *	- the unit is screen coordinates.
+ * @crtc_x: offset x on hardware screen.
+ * @crtc_y: offset y on hardware screen.
+ * @crtc_w: width of hardware screen.
+ * @crtc_h: height of hardware screen.
+ */
+struct exynos_drm_crtc_pos {
+	unsigned int fb_x;
+	unsigned int fb_y;
+	unsigned int crtc_x;
+	unsigned int crtc_y;
+	unsigned int crtc_w;
+	unsigned int crtc_h;
+};
+
+int exynos_drm_overlay_update(struct exynos_drm_overlay *overlay,
+			      struct drm_framebuffer *fb,
+			      struct drm_display_mode *mode,
+			      struct exynos_drm_crtc_pos *pos);
 #endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 83810cb..53e2216 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -27,6 +27,7 @@
 
 #include "drmP.h"
 #include "drm.h"
+#include "drm_crtc_helper.h"
 
 #include <drm/exynos_drm.h>
 
@@ -61,6 +62,9 @@
 
 	drm_mode_config_init(dev);
 
+	/* init kms poll for handling hpd */
+	drm_kms_helper_poll_init(dev);
+
 	exynos_drm_mode_config_init(dev);
 
 	/*
@@ -116,6 +120,7 @@
 	exynos_drm_fbdev_fini(dev);
 	exynos_drm_device_unregister(dev);
 	drm_vblank_cleanup(dev);
+	drm_kms_helper_poll_fini(dev);
 	drm_mode_config_cleanup(dev);
 	kfree(dev->dev_private);
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index c03683f..5e02e6e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -29,6 +29,7 @@
 #ifndef _EXYNOS_DRM_DRV_H_
 #define _EXYNOS_DRM_DRV_H_
 
+#include <linux/module.h>
 #include "drm.h"
 
 #define MAX_CRTC	2
@@ -79,8 +80,8 @@
  * @scan_flag: interlace or progressive way.
  *	(it could be DRM_MODE_FLAG_*)
  * @bpp: pixel size.(in bit)
- * @paddr: bus(accessed by dma) physical memory address to this overlay
- *		and this is physically continuous.
+ * @dma_addr: bus(accessed by dma) address to the memory region allocated
+ *	for a overlay.
  * @vaddr: virtual memory addresss to this overlay.
  * @default_win: a window to be enabled.
  * @color_key: color key on or off.
@@ -108,7 +109,7 @@
 	unsigned int scan_flag;
 	unsigned int bpp;
 	unsigned int pitch;
-	dma_addr_t paddr;
+	dma_addr_t dma_addr;
 	void __iomem *vaddr;
 
 	bool default_win;
@@ -130,7 +131,7 @@
  * @check_timing: check if timing is valid or not.
  * @power_on: display device on or off.
  */
-struct exynos_drm_display {
+struct exynos_drm_display_ops {
 	enum exynos_drm_output_type type;
 	bool (*is_connected)(struct device *dev);
 	int (*get_edid)(struct device *dev, struct drm_connector *connector,
@@ -146,12 +147,14 @@
  * @mode_set: convert drm_display_mode to hw specific display mode and
  *	      would be called by encoder->mode_set().
  * @commit: set current hw specific display mode to hw.
+ * @disable: disable hardware specific display mode.
  * @enable_vblank: specific driver callback for enabling vblank interrupt.
  * @disable_vblank: specific driver callback for disabling vblank interrupt.
  */
 struct exynos_drm_manager_ops {
 	void (*mode_set)(struct device *subdrv_dev, void *mode);
 	void (*commit)(struct device *subdrv_dev);
+	void (*disable)(struct device *subdrv_dev);
 	int (*enable_vblank)(struct device *subdrv_dev);
 	void (*disable_vblank)(struct device *subdrv_dev);
 };
@@ -178,7 +181,7 @@
 	int pipe;
 	struct exynos_drm_manager_ops *ops;
 	struct exynos_drm_overlay_ops *overlay_ops;
-	struct exynos_drm_display *display;
+	struct exynos_drm_display_ops *display_ops;
 };
 
 /*
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index 7cf6fa8..1530614 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -53,15 +53,36 @@
 	struct drm_device *dev = encoder->dev;
 	struct drm_connector *connector;
 	struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+	struct exynos_drm_manager_ops *manager_ops = manager->ops;
 
 	DRM_DEBUG_KMS("%s, encoder dpms: %d\n", __FILE__, mode);
 
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		if (manager_ops && manager_ops->commit)
+			manager_ops->commit(manager->dev);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		/* TODO */
+		if (manager_ops && manager_ops->disable)
+			manager_ops->disable(manager->dev);
+		break;
+	default:
+		DRM_ERROR("unspecified mode %d\n", mode);
+		break;
+	}
+
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (connector->encoder == encoder) {
-			struct exynos_drm_display *display = manager->display;
+			struct exynos_drm_display_ops *display_ops =
+							manager->display_ops;
 
-			if (display && display->power_on)
-				display->power_on(manager->dev, mode);
+			DRM_DEBUG_KMS("connector[%d] dpms[%d]\n",
+					connector->base.id, mode);
+			if (display_ops && display_ops->power_on)
+				display_ops->power_on(manager->dev, mode);
 		}
 	}
 }
@@ -116,15 +137,11 @@
 {
 	struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
 	struct exynos_drm_manager_ops *manager_ops = manager->ops;
-	struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
 	if (manager_ops && manager_ops->commit)
 		manager_ops->commit(manager->dev);
-
-	if (overlay_ops && overlay_ops->commit)
-		overlay_ops->commit(manager->dev);
 }
 
 static struct drm_crtc *
@@ -208,10 +225,23 @@
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_encoder *encoder;
+	struct exynos_drm_private *private = dev->dev_private;
+	struct exynos_drm_manager *manager;
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		if (encoder->crtc != crtc)
-			continue;
+		/*
+		 * if crtc is detached from encoder, check pipe,
+		 * otherwise check crtc attached to encoder
+		 */
+		if (!encoder->crtc) {
+			manager = to_exynos_encoder(encoder)->manager;
+			if (manager->pipe < 0 ||
+					private->crtc[manager->pipe] != crtc)
+				continue;
+		} else {
+			if (encoder->crtc != crtc)
+				continue;
+		}
 
 		fn(encoder, data);
 	}
@@ -250,8 +280,18 @@
 	struct exynos_drm_manager *manager =
 		to_exynos_encoder(encoder)->manager;
 	struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+	int crtc = *(int *)data;
 
-	overlay_ops->commit(manager->dev);
+	DRM_DEBUG_KMS("%s\n", __FILE__);
+
+	/*
+	 * when crtc is detached from encoder, this pipe is used
+	 * to select manager operation
+	 */
+	manager->pipe = crtc;
+
+	if (overlay_ops && overlay_ops->commit)
+		overlay_ops->commit(manager->dev);
 }
 
 void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data)
@@ -261,7 +301,28 @@
 	struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
 	struct exynos_drm_overlay *overlay = data;
 
-	overlay_ops->mode_set(manager->dev, overlay);
+	if (overlay_ops && overlay_ops->mode_set)
+		overlay_ops->mode_set(manager->dev, overlay);
+}
+
+void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data)
+{
+	struct exynos_drm_manager *manager =
+		to_exynos_encoder(encoder)->manager;
+	struct exynos_drm_overlay_ops *overlay_ops = manager->overlay_ops;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (overlay_ops && overlay_ops->disable)
+		overlay_ops->disable(manager->dev);
+
+	/*
+	 * crtc is already detached from encoder and last
+	 * function for detaching is properly done, so
+	 * clear pipe from manager to prevent repeated call
+	 */
+	if (!encoder->crtc)
+		manager->pipe = -1;
 }
 
 MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
index 5ecd645..a22acfb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
@@ -41,5 +41,6 @@
 void exynos_drm_disable_vblank(struct drm_encoder *encoder, void *data);
 void exynos_drm_encoder_crtc_commit(struct drm_encoder *encoder, void *data);
 void exynos_drm_encoder_crtc_mode_set(struct drm_encoder *encoder, void *data);
+void exynos_drm_encoder_crtc_disable(struct drm_encoder *encoder, void *data);
 
 #endif
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c
index 48d29cf..5bf4a1a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fb.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c
@@ -29,7 +29,9 @@
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 
+#include "exynos_drm_drv.h"
 #include "exynos_drm_fb.h"
 #include "exynos_drm_buf.h"
 #include "exynos_drm_gem.h"
@@ -41,14 +43,14 @@
  *
  * @fb: drm framebuffer obejct.
  * @exynos_gem_obj: exynos specific gem object containing a gem object.
- * @entry: pointer to exynos drm buffer entry object.
- *	- containing only the information to physically continuous memory
- *	region allocated at default framebuffer creation.
+ * @buffer: pointer to exynos_drm_gem_buffer object.
+ *	- contain the memory information to memory region allocated
+ *	at default framebuffer creation.
  */
 struct exynos_drm_fb {
 	struct drm_framebuffer		fb;
 	struct exynos_drm_gem_obj	*exynos_gem_obj;
-	struct exynos_drm_buf_entry	*entry;
+	struct exynos_drm_gem_buf	*buffer;
 };
 
 static void exynos_drm_fb_destroy(struct drm_framebuffer *fb)
@@ -63,8 +65,8 @@
 	 * default framebuffer has no gem object so
 	 * a buffer of the default framebuffer should be released at here.
 	 */
-	if (!exynos_fb->exynos_gem_obj && exynos_fb->entry)
-		exynos_drm_buf_destroy(fb->dev, exynos_fb->entry);
+	if (!exynos_fb->exynos_gem_obj && exynos_fb->buffer)
+		exynos_drm_buf_destroy(fb->dev, exynos_fb->buffer);
 
 	kfree(exynos_fb);
 	exynos_fb = NULL;
@@ -143,29 +145,29 @@
 	 */
 	if (!mode_cmd->handle) {
 		if (!file_priv) {
-			struct exynos_drm_buf_entry *entry;
+			struct exynos_drm_gem_buf *buffer;
 
 			/*
 			 * in case that file_priv is NULL, it allocates
 			 * only buffer and this buffer would be used
 			 * for default framebuffer.
 			 */
-			entry = exynos_drm_buf_create(dev, size);
-			if (IS_ERR(entry)) {
-				ret = PTR_ERR(entry);
+			buffer = exynos_drm_buf_create(dev, size);
+			if (IS_ERR(buffer)) {
+				ret = PTR_ERR(buffer);
 				goto err_buffer;
 			}
 
-			exynos_fb->entry = entry;
+			exynos_fb->buffer = buffer;
 
-			DRM_LOG_KMS("default fb: paddr = 0x%lx, size = 0x%x\n",
-					(unsigned long)entry->paddr, size);
+			DRM_LOG_KMS("default: dma_addr = 0x%lx, size = 0x%x\n",
+					(unsigned long)buffer->dma_addr, size);
 
 			goto out;
 		} else {
-			exynos_gem_obj = exynos_drm_gem_create(file_priv, dev,
-							size,
-							&mode_cmd->handle);
+			exynos_gem_obj = exynos_drm_gem_create(dev, file_priv,
+							&mode_cmd->handle,
+							size);
 			if (IS_ERR(exynos_gem_obj)) {
 				ret = PTR_ERR(exynos_gem_obj);
 				goto err_buffer;
@@ -189,10 +191,10 @@
 	 * so that default framebuffer has no its own gem object,
 	 * only its own buffer object.
 	 */
-	exynos_fb->entry = exynos_gem_obj->entry;
+	exynos_fb->buffer = exynos_gem_obj->buffer;
 
-	DRM_LOG_KMS("paddr = 0x%lx, size = 0x%x, gem object = 0x%x\n",
-			(unsigned long)exynos_fb->entry->paddr, size,
+	DRM_LOG_KMS("dma_addr = 0x%lx, size = 0x%x, gem object = 0x%x\n",
+			(unsigned long)exynos_fb->buffer->dma_addr, size,
 			(unsigned int)&exynos_gem_obj->base);
 
 out:
@@ -220,26 +222,36 @@
 	return exynos_drm_fb_init(file_priv, dev, mode_cmd);
 }
 
-struct exynos_drm_buf_entry *exynos_drm_fb_get_buf(struct drm_framebuffer *fb)
+struct exynos_drm_gem_buf *exynos_drm_fb_get_buf(struct drm_framebuffer *fb)
 {
 	struct exynos_drm_fb *exynos_fb = to_exynos_fb(fb);
-	struct exynos_drm_buf_entry *entry;
+	struct exynos_drm_gem_buf *buffer;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	entry = exynos_fb->entry;
-	if (!entry)
+	buffer = exynos_fb->buffer;
+	if (!buffer)
 		return NULL;
 
-	DRM_DEBUG_KMS("vaddr = 0x%lx, paddr = 0x%lx\n",
-			(unsigned long)entry->vaddr,
-			(unsigned long)entry->paddr);
+	DRM_DEBUG_KMS("vaddr = 0x%lx, dma_addr = 0x%lx\n",
+			(unsigned long)buffer->kvaddr,
+			(unsigned long)buffer->dma_addr);
 
-	return entry;
+	return buffer;
+}
+
+static void exynos_drm_output_poll_changed(struct drm_device *dev)
+{
+	struct exynos_drm_private *private = dev->dev_private;
+	struct drm_fb_helper *fb_helper = private->fb_helper;
+
+	if (fb_helper)
+		drm_fb_helper_hotplug_event(fb_helper);
 }
 
 static struct drm_mode_config_funcs exynos_drm_mode_config_funcs = {
 	.fb_create = exynos_drm_fb_create,
+	.output_poll_changed = exynos_drm_output_poll_changed,
 };
 
 void exynos_drm_mode_config_init(struct drm_device *dev)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index 1f4b3d1..836f410 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -33,6 +33,7 @@
 
 #include "exynos_drm_drv.h"
 #include "exynos_drm_fb.h"
+#include "exynos_drm_gem.h"
 #include "exynos_drm_buf.h"
 
 #define MAX_CONNECTOR		4
@@ -85,15 +86,13 @@
 };
 
 static int exynos_drm_fbdev_update(struct drm_fb_helper *helper,
-				     struct drm_framebuffer *fb,
-				     unsigned int fb_width,
-				     unsigned int fb_height)
+				     struct drm_framebuffer *fb)
 {
 	struct fb_info *fbi = helper->fbdev;
 	struct drm_device *dev = helper->dev;
 	struct exynos_drm_fbdev *exynos_fb = to_exynos_fbdev(helper);
-	struct exynos_drm_buf_entry *entry;
-	unsigned int size = fb_width * fb_height * (fb->bits_per_pixel >> 3);
+	struct exynos_drm_gem_buf *buffer;
+	unsigned int size = fb->width * fb->height * (fb->bits_per_pixel >> 3);
 	unsigned long offset;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
@@ -101,20 +100,20 @@
 	exynos_fb->fb = fb;
 
 	drm_fb_helper_fill_fix(fbi, fb->pitch, fb->depth);
-	drm_fb_helper_fill_var(fbi, helper, fb_width, fb_height);
+	drm_fb_helper_fill_var(fbi, helper, fb->width, fb->height);
 
-	entry = exynos_drm_fb_get_buf(fb);
-	if (!entry) {
-		DRM_LOG_KMS("entry is null.\n");
+	buffer = exynos_drm_fb_get_buf(fb);
+	if (!buffer) {
+		DRM_LOG_KMS("buffer is null.\n");
 		return -EFAULT;
 	}
 
 	offset = fbi->var.xoffset * (fb->bits_per_pixel >> 3);
 	offset += fbi->var.yoffset * fb->pitch;
 
-	dev->mode_config.fb_base = entry->paddr;
-	fbi->screen_base = entry->vaddr + offset;
-	fbi->fix.smem_start = entry->paddr + offset;
+	dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr;
+	fbi->screen_base = buffer->kvaddr + offset;
+	fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset);
 	fbi->screen_size = size;
 	fbi->fix.smem_len = size;
 
@@ -171,8 +170,7 @@
 		goto out;
 	}
 
-	ret = exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width,
-			sizes->fb_height);
+	ret = exynos_drm_fbdev_update(helper, helper->fb);
 	if (ret < 0)
 		fb_dealloc_cmap(&fbi->cmap);
 
@@ -235,8 +233,7 @@
 	}
 
 	helper->fb = exynos_fbdev->fb;
-	return exynos_drm_fbdev_update(helper, helper->fb, sizes->fb_width,
-			sizes->fb_height);
+	return exynos_drm_fbdev_update(helper, helper->fb);
 }
 
 static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
@@ -405,6 +402,18 @@
 	fb_helper = private->fb_helper;
 
 	if (fb_helper) {
+		struct list_head temp_list;
+
+		INIT_LIST_HEAD(&temp_list);
+
+		/*
+		 * fb_helper is reintialized but kernel fb is reused
+		 * so kernel_fb_list need to be backuped and restored
+		 */
+		if (!list_empty(&fb_helper->kernel_fb_list))
+			list_replace_init(&fb_helper->kernel_fb_list,
+					&temp_list);
+
 		drm_fb_helper_fini(fb_helper);
 
 		ret = drm_fb_helper_init(dev, fb_helper,
@@ -414,6 +423,9 @@
 			return ret;
 		}
 
+		if (!list_empty(&temp_list))
+			list_replace(&temp_list, &fb_helper->kernel_fb_list);
+
 		ret = drm_fb_helper_single_add_all_connectors(fb_helper);
 		if (ret < 0) {
 			DRM_ERROR("failed to add fb helper to connectors\n");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 4659c88..db3b3d9 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -64,7 +64,7 @@
 	unsigned int		fb_width;
 	unsigned int		fb_height;
 	unsigned int		bpp;
-	dma_addr_t		paddr;
+	dma_addr_t		dma_addr;
 	void __iomem		*vaddr;
 	unsigned int		buf_offsize;
 	unsigned int		line_size;	/* bytes */
@@ -124,7 +124,7 @@
 	return 0;
 }
 
-static struct exynos_drm_display fimd_display = {
+static struct exynos_drm_display_ops fimd_display_ops = {
 	.type = EXYNOS_DISPLAY_TYPE_LCD,
 	.is_connected = fimd_display_is_connected,
 	.get_timing = fimd_get_timing,
@@ -177,6 +177,40 @@
 	writel(val, ctx->regs + VIDCON0);
 }
 
+static void fimd_disable(struct device *dev)
+{
+	struct fimd_context *ctx = get_fimd_context(dev);
+	struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+	struct drm_device *drm_dev = subdrv->drm_dev;
+	struct exynos_drm_manager *manager = &subdrv->manager;
+	u32 val;
+
+	DRM_DEBUG_KMS("%s\n", __FILE__);
+
+	/* fimd dma off */
+	val = readl(ctx->regs + VIDCON0);
+	val &= ~(VIDCON0_ENVID | VIDCON0_ENVID_F);
+	writel(val, ctx->regs + VIDCON0);
+
+	/*
+	 * if vblank is enabled status with dma off then
+	 * it disables vsync interrupt.
+	 */
+	if (drm_dev->vblank_enabled[manager->pipe] &&
+		atomic_read(&drm_dev->vblank_refcount[manager->pipe])) {
+		drm_vblank_put(drm_dev, manager->pipe);
+
+		/*
+		 * if vblank_disable_allowed is 0 then disable
+		 * vsync interrupt right now else the vsync interrupt
+		 * would be disabled by drm timer once a current process
+		 * gives up ownershop of vblank event.
+		 */
+		if (!drm_dev->vblank_disable_allowed)
+			drm_vblank_off(drm_dev, manager->pipe);
+	}
+}
+
 static int fimd_enable_vblank(struct device *dev)
 {
 	struct fimd_context *ctx = get_fimd_context(dev);
@@ -220,6 +254,7 @@
 
 static struct exynos_drm_manager_ops fimd_manager_ops = {
 	.commit = fimd_commit,
+	.disable = fimd_disable,
 	.enable_vblank = fimd_enable_vblank,
 	.disable_vblank = fimd_disable_vblank,
 };
@@ -251,7 +286,7 @@
 	win_data->ovl_height = overlay->crtc_height;
 	win_data->fb_width = overlay->fb_width;
 	win_data->fb_height = overlay->fb_height;
-	win_data->paddr = overlay->paddr + offset;
+	win_data->dma_addr = overlay->dma_addr + offset;
 	win_data->vaddr = overlay->vaddr + offset;
 	win_data->bpp = overlay->bpp;
 	win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) *
@@ -263,7 +298,7 @@
 	DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
 			win_data->ovl_width, win_data->ovl_height);
 	DRM_DEBUG_KMS("paddr = 0x%lx, vaddr = 0x%lx\n",
-			(unsigned long)win_data->paddr,
+			(unsigned long)win_data->dma_addr,
 			(unsigned long)win_data->vaddr);
 	DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
 			overlay->fb_width, overlay->crtc_width);
@@ -376,16 +411,16 @@
 	writel(val, ctx->regs + SHADOWCON);
 
 	/* buffer start address */
-	val = win_data->paddr;
+	val = (unsigned long)win_data->dma_addr;
 	writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
 
 	/* buffer end address */
 	size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3);
-	val = win_data->paddr + size;
+	val = (unsigned long)(win_data->dma_addr + size);
 	writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
 
 	DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
-			(unsigned long)win_data->paddr, val, size);
+			(unsigned long)win_data->dma_addr, val, size);
 	DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
 			win_data->ovl_width, win_data->ovl_height);
 
@@ -447,7 +482,6 @@
 static void fimd_win_disable(struct device *dev)
 {
 	struct fimd_context *ctx = get_fimd_context(dev);
-	struct fimd_win_data *win_data;
 	int win = ctx->default_win;
 	u32 val;
 
@@ -456,8 +490,6 @@
 	if (win < 0 || win > WINDOWS_NR)
 		return;
 
-	win_data = &ctx->win_data[win];
-
 	/* protect windows */
 	val = readl(ctx->regs + SHADOWCON);
 	val |= SHADOWCON_WINx_PROTECT(win);
@@ -528,6 +560,16 @@
 		/* VSYNC interrupt */
 		writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1);
 
+	/*
+	 * in case that vblank_disable_allowed is 1, it could induce
+	 * the problem that manager->pipe could be -1 because with
+	 * disable callback, vsync interrupt isn't disabled and at this moment,
+	 * vsync interrupt could occur. the vsync interrupt would be disabled
+	 * by timer handler later.
+	 */
+	if (manager->pipe == -1)
+		return IRQ_HANDLED;
+
 	drm_handle_vblank(drm_dev, manager->pipe);
 	fimd_finish_pageflip(drm_dev, manager->pipe);
 
@@ -548,13 +590,6 @@
 	 */
 	drm_dev->irq_enabled = 1;
 
-	/*
-	 * with vblank_disable_allowed = 1, vblank interrupt will be disabled
-	 * by drm timer once a current process gives up ownership of
-	 * vblank event.(drm_vblank_put function was called)
-	 */
-	drm_dev->vblank_disable_allowed = 1;
-
 	return 0;
 }
 
@@ -731,7 +766,7 @@
 	subdrv->manager.pipe = -1;
 	subdrv->manager.ops = &fimd_manager_ops;
 	subdrv->manager.overlay_ops = &fimd_overlay_ops;
-	subdrv->manager.display = &fimd_display;
+	subdrv->manager.display_ops = &fimd_display_ops;
 	subdrv->manager.dev = dev;
 
 	platform_set_drvdata(pdev, ctx);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c
index a8e7a88..aba0fe4 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gem.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c
@@ -62,40 +62,28 @@
 	return (unsigned int)obj->map_list.hash.key << PAGE_SHIFT;
 }
 
-struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv,
-		struct drm_device *dev, unsigned int size,
-		unsigned int *handle)
+static struct exynos_drm_gem_obj
+		*exynos_drm_gem_init(struct drm_device *drm_dev,
+			struct drm_file *file_priv, unsigned int *handle,
+			unsigned int size)
 {
 	struct exynos_drm_gem_obj *exynos_gem_obj;
-	struct exynos_drm_buf_entry *entry;
 	struct drm_gem_object *obj;
 	int ret;
 
-	DRM_DEBUG_KMS("%s\n", __FILE__);
-
-	size = roundup(size, PAGE_SIZE);
-
 	exynos_gem_obj = kzalloc(sizeof(*exynos_gem_obj), GFP_KERNEL);
 	if (!exynos_gem_obj) {
 		DRM_ERROR("failed to allocate exynos gem object.\n");
 		return ERR_PTR(-ENOMEM);
 	}
 
-	/* allocate the new buffer object and memory region. */
-	entry = exynos_drm_buf_create(dev, size);
-	if (!entry) {
-		kfree(exynos_gem_obj);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	exynos_gem_obj->entry = entry;
-
 	obj = &exynos_gem_obj->base;
 
-	ret = drm_gem_object_init(dev, obj, size);
+	ret = drm_gem_object_init(drm_dev, obj, size);
 	if (ret < 0) {
-		DRM_ERROR("failed to initailize gem object.\n");
-		goto err_obj_init;
+		DRM_ERROR("failed to initialize gem object.\n");
+		ret = -EINVAL;
+		goto err_object_init;
 	}
 
 	DRM_DEBUG_KMS("created file object = 0x%x\n", (unsigned int)obj->filp);
@@ -127,24 +115,50 @@
 err_create_mmap_offset:
 	drm_gem_object_release(obj);
 
-err_obj_init:
-	exynos_drm_buf_destroy(dev, exynos_gem_obj->entry);
-
+err_object_init:
 	kfree(exynos_gem_obj);
 
 	return ERR_PTR(ret);
 }
 
+struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev,
+				struct drm_file *file_priv,
+				unsigned int *handle, unsigned long size)
+{
+
+	struct exynos_drm_gem_obj *exynos_gem_obj = NULL;
+	struct exynos_drm_gem_buf *buffer;
+
+	size = roundup(size, PAGE_SIZE);
+
+	DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size);
+
+	buffer = exynos_drm_buf_create(dev, size);
+	if (IS_ERR(buffer)) {
+		return ERR_CAST(buffer);
+	}
+
+	exynos_gem_obj = exynos_drm_gem_init(dev, file_priv, handle, size);
+	if (IS_ERR(exynos_gem_obj)) {
+		exynos_drm_buf_destroy(dev, buffer);
+		return exynos_gem_obj;
+	}
+
+	exynos_gem_obj->buffer = buffer;
+
+	return exynos_gem_obj;
+}
+
 int exynos_drm_gem_create_ioctl(struct drm_device *dev, void *data,
-		struct drm_file *file_priv)
+					struct drm_file *file_priv)
 {
 	struct drm_exynos_gem_create *args = data;
-	struct exynos_drm_gem_obj *exynos_gem_obj;
+	struct exynos_drm_gem_obj *exynos_gem_obj = NULL;
 
-	DRM_DEBUG_KMS("%s : size = 0x%x\n", __FILE__, args->size);
+	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size,
-			&args->handle);
+	exynos_gem_obj = exynos_drm_gem_create(dev, file_priv,
+						&args->handle, args->size);
 	if (IS_ERR(exynos_gem_obj))
 		return PTR_ERR(exynos_gem_obj);
 
@@ -175,7 +189,7 @@
 {
 	struct drm_gem_object *obj = filp->private_data;
 	struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj);
-	struct exynos_drm_buf_entry *entry;
+	struct exynos_drm_gem_buf *buffer;
 	unsigned long pfn, vm_size;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
@@ -187,20 +201,20 @@
 
 	vm_size = vma->vm_end - vma->vm_start;
 	/*
-	 * a entry contains information to physically continuous memory
+	 * a buffer contains information to physically continuous memory
 	 * allocated by user request or at framebuffer creation.
 	 */
-	entry = exynos_gem_obj->entry;
+	buffer = exynos_gem_obj->buffer;
 
 	/* check if user-requested size is valid. */
-	if (vm_size > entry->size)
+	if (vm_size > buffer->size)
 		return -EINVAL;
 
 	/*
 	 * get page frame number to physical memory to be mapped
 	 * to user space.
 	 */
-	pfn = exynos_gem_obj->entry->paddr >> PAGE_SHIFT;
+	pfn = ((unsigned long)exynos_gem_obj->buffer->dma_addr) >> PAGE_SHIFT;
 
 	DRM_DEBUG_KMS("pfn = 0x%lx\n", pfn);
 
@@ -281,7 +295,7 @@
 
 	exynos_gem_obj = to_exynos_gem_obj(gem_obj);
 
-	exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->entry);
+	exynos_drm_buf_destroy(gem_obj->dev, exynos_gem_obj->buffer);
 
 	kfree(exynos_gem_obj);
 }
@@ -302,8 +316,8 @@
 	args->pitch = args->width * args->bpp >> 3;
 	args->size = args->pitch * args->height;
 
-	exynos_gem_obj = exynos_drm_gem_create(file_priv, dev, args->size,
-							&args->handle);
+	exynos_gem_obj = exynos_drm_gem_create(dev, file_priv, &args->handle,
+							args->size);
 	if (IS_ERR(exynos_gem_obj))
 		return PTR_ERR(exynos_gem_obj);
 
@@ -360,7 +374,8 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	pfn = (exynos_gem_obj->entry->paddr >> PAGE_SHIFT) + page_offset;
+	pfn = (((unsigned long)exynos_gem_obj->buffer->dma_addr) >>
+			PAGE_SHIFT) + page_offset;
 
 	ret = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn);
 
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h
index e5fc014..ef87973 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gem.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h
@@ -30,13 +30,29 @@
 			struct exynos_drm_gem_obj, base)
 
 /*
+ * exynos drm gem buffer structure.
+ *
+ * @kvaddr: kernel virtual address to allocated memory region.
+ * @dma_addr: bus address(accessed by dma) to allocated memory region.
+ *	- this address could be physical address without IOMMU and
+ *	device address with IOMMU.
+ * @size: size of allocated memory region.
+ */
+struct exynos_drm_gem_buf {
+	void __iomem		*kvaddr;
+	dma_addr_t		dma_addr;
+	unsigned long		size;
+};
+
+/*
  * exynos drm buffer structure.
  *
  * @base: a gem object.
  *	- a new handle to this gem object would be created
  *	by drm_gem_handle_create().
- * @entry: pointer to exynos drm buffer entry object.
- *	- containing the information to physically
+ * @buffer: a pointer to exynos_drm_gem_buffer object.
+ *	- contain the information to memory region allocated
+ *	by user request or at framebuffer creation.
  *	continuous memory region allocated by user request
  *	or at framebuffer creation.
  *
@@ -45,13 +61,13 @@
  */
 struct exynos_drm_gem_obj {
 	struct drm_gem_object base;
-	struct exynos_drm_buf_entry *entry;
+	struct exynos_drm_gem_buf *buffer;
 };
 
 /* create a new buffer and get a new gem handle. */
-struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_file *file_priv,
-		struct drm_device *dev, unsigned int size,
-		unsigned int *handle);
+struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev,
+		struct drm_file *file_priv,
+		unsigned int *handle, unsigned long size);
 
 /*
  * request gem object creation and buffer allocation as the size
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 08792a7..07d55df 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -24,6 +24,8 @@
  *
  */
 
+#include <linux/module.h>
+
 #include "ch7006_priv.h"
 
 /* DRM encoder functions */
diff --git a/drivers/gpu/drm/i2c/sil164_drv.c b/drivers/gpu/drm/i2c/sil164_drv.c
index 0b67732..b7d45ab 100644
--- a/drivers/gpu/drm/i2c/sil164_drv.c
+++ b/drivers/gpu/drm/i2c/sil164_drv.c
@@ -24,6 +24,8 @@
  *
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm_crtc_helper.h"
 #include "drm_encoder_slave.h"
diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c
index 6f98d05..d4266bd 100644
--- a/drivers/gpu/drm/i810/i810_drv.c
+++ b/drivers/gpu/drm/i810/i810_drv.c
@@ -30,6 +30,8 @@
  *    Gareth Hughes <gareth@valinux.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm.h"
 #include "i810_drm.h"
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 8e95d66..d09a6e0 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -29,6 +29,7 @@
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm.h"
 #include "intel_drv.h"
@@ -635,11 +636,16 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
+	int ret;
 
 	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
 	if (ring->size == 0)
 		return 0;
 
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	seq_printf(m, "Ring %s:\n", ring->name);
 	seq_printf(m, "  Head :    %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR);
 	seq_printf(m, "  Tail :    %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR);
@@ -653,6 +659,8 @@
 	seq_printf(m, "  Control : %08x\n", I915_READ_CTL(ring));
 	seq_printf(m, "  Start :   %08x\n", I915_READ_START(ring));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -841,7 +849,16 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u16 crstanddelay = I915_READ16(CRSTANDVID);
+	u16 crstanddelay;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	crstanddelay = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
 
@@ -939,7 +956,11 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 delayfreq;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < 16; i++) {
 		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
@@ -947,6 +968,8 @@
 			   (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -961,13 +984,19 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 inttoext;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 1; i <= 32; i++) {
 		inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
 		seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -976,9 +1005,19 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u32 rgvmodectl = I915_READ(MEMMODECTL);
-	u32 rstdbyctl = I915_READ(RSTDBYCTL);
-	u16 crstandvid = I915_READ16(CRSTANDVID);
+	u32 rgvmodectl, rstdbyctl;
+	u16 crstandvid;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rgvmodectl = I915_READ(MEMMODECTL);
+	rstdbyctl = I915_READ(RSTDBYCTL);
+	crstandvid = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
 		   "yes" : "no");
@@ -1166,9 +1205,16 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -1505,7 +1551,10 @@
 	node->minor = minor;
 	node->dent = ent;
 	node->info_ent = (void *) key;
-	list_add(&node->list, &minor->debugfs_nodes.list);
+
+	mutex_lock(&minor->debugfs_lock);
+	list_add(&node->list, &minor->debugfs_list);
+	mutex_unlock(&minor->debugfs_lock);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2eac955..a9533c5 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -41,6 +41,7 @@
 #include <linux/pnp.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <acpi/video.h>
 
 static void i915_write_hws_pga(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 4c8d681..15bfa91 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -35,6 +35,7 @@
 #include "intel_drv.h"
 
 #include <linux/console.h>
+#include <linux/module.h>
 #include "drm_crtc_helper.h"
 
 static int i915_modeset __read_mostly = -1;
@@ -67,7 +68,7 @@
 MODULE_PARM_DESC(i915_enable_rc6,
 		"Enable power-saving render C-state 6 (default: true)");
 
-unsigned int i915_enable_fbc __read_mostly = -1;
+int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
 		"Enable frame buffer compression for power savings "
@@ -79,7 +80,7 @@
 		"Use panel (LVDS/eDP) downclocking for power savings "
 		"(default: false)");
 
-unsigned int i915_panel_use_ssc __read_mostly = -1;
+int i915_panel_use_ssc __read_mostly = -1;
 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
@@ -106,7 +107,7 @@
 extern int intel_agp_enabled;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
-	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
+	.class = PCI_BASE_CLASS_DISPLAY << 16,	\
 	.class_mask = 0xff0000,			\
 	.vendor = 0x8086,			\
 	.device = id,				\
@@ -788,8 +789,8 @@
 };
 
 static struct drm_driver driver = {
-	/* don't use mtrr's here, the Xserver or user space app should
-	 * deal with them for intel hardware.
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 06a37f4..4a9c1b9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -126,6 +126,9 @@
 	struct _drm_i915_sarea *sarea_priv;
 };
 #define I915_FENCE_REG_NONE -1
+#define I915_MAX_NUM_FENCES 16
+/* 16 fences + sign bit for FENCE_REG_NONE */
+#define I915_MAX_NUM_FENCE_BITS 5
 
 struct drm_i915_fence_reg {
 	struct list_head lru_list;
@@ -168,7 +171,7 @@
 	u32 instdone1;
 	u32 seqno;
 	u64 bbaddr;
-	u64 fence[16];
+	u64 fence[I915_MAX_NUM_FENCES];
 	struct timeval time;
 	struct drm_i915_error_object {
 		int page_count;
@@ -182,7 +185,7 @@
 		u32 gtt_offset;
 		u32 read_domains;
 		u32 write_domain;
-		s32 fence_reg:5;
+		s32 fence_reg:I915_MAX_NUM_FENCE_BITS;
 		s32 pinned:2;
 		u32 tiling:2;
 		u32 dirty:1;
@@ -375,7 +378,7 @@
 	struct notifier_block lid_notifier;
 
 	int crt_ddc_pin;
-	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
+	struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
@@ -506,7 +509,7 @@
 	u8 saveAR[21];
 	u8 saveDACMASK;
 	u8 saveCR[37];
-	uint64_t saveFENCE[16];
+	uint64_t saveFENCE[I915_MAX_NUM_FENCES];
 	u32 saveCURACNTR;
 	u32 saveCURAPOS;
 	u32 saveCURABASE;
@@ -777,10 +780,8 @@
 	 * Fence register bits (if any) for this object.  Will be set
 	 * as needed when mapped into the GTT.
 	 * Protected by dev->struct_mutex.
-	 *
-	 * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
 	 */
-	signed int fence_reg:5;
+	signed int fence_reg:I915_MAX_NUM_FENCE_BITS;
 
 	/**
 	 * Advice: are the backing pages purgeable?
@@ -999,10 +1000,10 @@
 extern unsigned int i915_powersave __read_mostly;
 extern unsigned int i915_semaphores __read_mostly;
 extern unsigned int i915_lvds_downclock __read_mostly;
-extern unsigned int i915_panel_use_ssc __read_mostly;
+extern int i915_panel_use_ssc __read_mostly;
 extern int i915_vbt_sdvo_panel_type __read_mostly;
 extern unsigned int i915_enable_rc6 __read_mostly;
-extern unsigned int i915_enable_fbc __read_mostly;
+extern int i915_enable_fbc __read_mostly;
 extern bool i915_enable_hangcheck __read_mostly;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6651c36..8359dc7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1396,7 +1396,7 @@
 
 	if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
 		ret = -E2BIG;
-		goto unlock;
+		goto out;
 	}
 
 	if (obj->madv != I915_MADV_WILLNEED) {
@@ -1745,7 +1745,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int i;
 
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < dev_priv->num_fence_regs; i++) {
 		struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
 		struct drm_i915_gem_object *obj = reg->obj;
 
@@ -3512,9 +3512,11 @@
 			 * so emit a request to do so.
 			 */
 			request = kzalloc(sizeof(*request), GFP_KERNEL);
-			if (request)
+			if (request) {
 				ret = i915_add_request(obj->ring, NULL, request);
-			else
+				if (ret)
+					kfree(request);
+			} else
 				ret = -ENOMEM;
 		}
 
@@ -3613,7 +3615,7 @@
 	obj->base.write_domain = I915_GEM_DOMAIN_CPU;
 	obj->base.read_domains = I915_GEM_DOMAIN_CPU;
 
-	if (IS_GEN6(dev)) {
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		/* On Gen6, we can have the GPU use the LLC (the CPU
 		 * cache) for about a 10% performance improvement
 		 * compared to uncached.  Graphics requests other than
@@ -3877,7 +3879,7 @@
 	INIT_LIST_HEAD(&dev_priv->mm.gtt_list);
 	for (i = 0; i < I915_NUM_RINGS; i++)
 		init_ring_lists(&dev_priv->ring[i]);
-	for (i = 0; i < 16; i++)
+	for (i = 0; i < I915_MAX_NUM_FENCES; i++)
 		INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9ee2729..b40004b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -824,6 +824,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5a09416..b080cc8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,12 +1553,21 @@
  */
 #define   PP_READY		(1 << 30)
 #define   PP_SEQUENCE_NONE	(0 << 28)
-#define   PP_SEQUENCE_ON	(1 << 28)
-#define   PP_SEQUENCE_OFF	(2 << 28)
-#define   PP_SEQUENCE_MASK	0x30000000
+#define   PP_SEQUENCE_POWER_UP	(1 << 28)
+#define   PP_SEQUENCE_POWER_DOWN (2 << 28)
+#define   PP_SEQUENCE_MASK	(3 << 28)
+#define   PP_SEQUENCE_SHIFT	28
 #define   PP_CYCLE_DELAY_ACTIVE	(1 << 27)
-#define   PP_SEQUENCE_STATE_ON_IDLE (1 << 3)
 #define   PP_SEQUENCE_STATE_MASK 0x0000000f
+#define   PP_SEQUENCE_STATE_OFF_IDLE	(0x0 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_1	(0x1 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_2	(0x2 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_3	(0x3 << 0)
+#define   PP_SEQUENCE_STATE_ON_IDLE	(0x8 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_0	(0x9 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_2	(0xa << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_3	(0xb << 0)
+#define   PP_SEQUENCE_STATE_RESET	(0xf << 0)
 #define PP_CONTROL	0x61204
 #define   POWER_TARGET_ON	(1 << 0)
 #define PP_ON_DELAYS	0x61208
@@ -3444,6 +3453,10 @@
 #define  GT_FIFO_FREE_ENTRIES			0x120008
 #define    GT_FIFO_NUM_RESERVED_ENTRIES		20
 
+#define GEN6_UCGCTL2				0x9404
+# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
+# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+
 #define GEN6_RPNSWREQ				0xA008
 #define   GEN6_TURBO_DISABLE			(1<<31)
 #define   GEN6_FREQUENCY(x)			((x)<<25)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index f8f602d..7886e4f 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -370,6 +370,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
@@ -404,6 +405,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 981b1f1..e77a863 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2933,7 +2933,8 @@
 
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) &&
-	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
 		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
@@ -4711,7 +4712,7 @@
 				lvds_bpc = 6;
 
 			if (lvds_bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
 				display_bpc = lvds_bpc;
 			}
 			continue;
@@ -4722,7 +4723,7 @@
 			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
 
 			if (edp_bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
 				display_bpc = edp_bpc;
 			}
 			continue;
@@ -4737,7 +4738,7 @@
 			/* Don't use an invalid EDID bpc value */
 			if (connector->display_info.bpc &&
 			    connector->display_info.bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
 				display_bpc = connector->display_info.bpc;
 			}
 		}
@@ -4748,10 +4749,10 @@
 		 */
 		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
 			if (display_bpc > 8 && display_bpc < 12) {
-				DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n");
+				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
 				display_bpc = 12;
 			} else {
-				DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n");
+				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
 				display_bpc = 8;
 			}
 		}
@@ -4789,8 +4790,8 @@
 
 	display_bpc = min(display_bpc, bpc);
 
-	DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
-			 bpc, display_bpc);
+	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
+		      bpc, display_bpc);
 
 	*pipe_bpp = display_bpc * 3;
 
@@ -5671,7 +5672,7 @@
 	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
 	if ((is_lvds && dev_priv->lvds_dither) || dither) {
 		pipeconf |= PIPECONF_DITHER_EN;
-		pipeconf |= PIPECONF_DITHER_TYPE_ST1;
+		pipeconf |= PIPECONF_DITHER_TYPE_SP;
 	}
 	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
@@ -8148,6 +8149,20 @@
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
 	/*
 	 * According to the spec the following bits should be
 	 * set in order to enable memory self-refresh and fbc:
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fc1a0832..4d0358f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -27,6 +27,7 @@
 
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
@@ -58,7 +59,6 @@
 	struct i2c_algo_dp_aux_data algo;
 	bool is_pch_edp;
 	uint8_t	train_set[4];
-	uint8_t link_status[DP_LINK_STATUS_SIZE];
 	int panel_power_up_delay;
 	int panel_power_down_delay;
 	int panel_power_cycle_delay;
@@ -67,7 +67,6 @@
 	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
-	unsigned long panel_off_jiffies;
 };
 
 /**
@@ -156,16 +155,12 @@
 static int
 intel_dp_max_lane_count(struct intel_dp *intel_dp)
 {
-	int max_lane_count = 4;
-
-	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
-		max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
-		switch (max_lane_count) {
-		case 1: case 2: case 4:
-			break;
-		default:
-			max_lane_count = 4;
-		}
+	int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
+	switch (max_lane_count) {
+	case 1: case 2: case 4:
+		break;
+	default:
+		max_lane_count = 4;
 	}
 	return max_lane_count;
 }
@@ -767,12 +762,11 @@
 			continue;
 
 		intel_dp = enc_to_intel_dp(encoder);
-		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) {
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
+		{
 			lane_count = intel_dp->lane_count;
 			break;
-		} else if (is_edp(intel_dp)) {
-			lane_count = dev_priv->edp.lanes;
-			break;
 		}
 	}
 
@@ -809,6 +803,7 @@
 		  struct drm_display_mode *adjusted_mode)
 {
 	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct drm_crtc *crtc = intel_dp->base.base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -821,18 +816,31 @@
 			ironlake_edp_pll_off(encoder);
 	}
 
-	intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
-	intel_dp->DP |= intel_dp->color_range;
+	/*
+	 * There are three kinds of DP registers:
+	 *
+	 * 	IBX PCH
+	 * 	CPU
+	 * 	CPT PCH
+	 *
+	 * IBX PCH and CPU are the same for almost everything,
+	 * except that the CPU DP PLL is configured in this
+	 * register
+	 *
+	 * CPT PCH is quite different, having many bits moved
+	 * to the TRANS_DP_CTL register instead. That
+	 * configuration happens (oddly) in ironlake_pch_enable
+	 */
 
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		intel_dp->DP |= DP_SYNC_HS_HIGH;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		intel_dp->DP |= DP_SYNC_VS_HIGH;
+	/* Preserve the BIOS-computed detected bit. This is
+	 * supposed to be read-only.
+	 */
+	intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
+	intel_dp->DP |=  DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
-		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
-	else
-		intel_dp->DP |= DP_LINK_TRAIN_OFF;
+	/* Handle DP bits in common between all three register formats */
+
+	intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
 	switch (intel_dp->lane_count) {
 	case 1:
@@ -851,59 +859,106 @@
 		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
 		intel_write_eld(encoder, adjusted_mode);
 	}
-
 	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
 	intel_dp->link_configuration[0] = intel_dp->link_bw;
 	intel_dp->link_configuration[1] = intel_dp->lane_count;
 	intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-
 	/*
 	 * Check for DPCD version > 1.1 and enhanced framing support
 	 */
 	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
 	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
 		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-		intel_dp->DP |= DP_ENHANCED_FRAMING;
 	}
 
-	/* CPT DP's pipe select is decided in TRANS_DP_CTL */
-	if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
-		intel_dp->DP |= DP_PIPEB_SELECT;
+	/* Split out the IBX/CPU vs CPT settings */
 
-	if (is_cpu_edp(intel_dp)) {
-		/* don't miss out required setting for eDP */
-		intel_dp->DP |= DP_PLL_ENABLE;
-		if (adjusted_mode->clock < 200000)
-			intel_dp->DP |= DP_PLL_FREQ_160MHZ;
-		else
-			intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+	if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+		intel_dp->DP |= intel_dp->color_range;
+
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			intel_dp->DP |= DP_SYNC_HS_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			intel_dp->DP |= DP_SYNC_VS_HIGH;
+		intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+		if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+			intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+		if (intel_crtc->pipe == 1)
+			intel_dp->DP |= DP_PIPEB_SELECT;
+
+		if (is_cpu_edp(intel_dp)) {
+			/* don't miss out required setting for eDP */
+			intel_dp->DP |= DP_PLL_ENABLE;
+			if (adjusted_mode->clock < 200000)
+				intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+			else
+				intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+		}
+	} else {
+		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 	}
 }
 
+#define IDLE_ON_MASK		(PP_ON | 0 	  | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_ON_VALUE   	(PP_ON | 0 	  | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_ON_IDLE)
+
+#define IDLE_OFF_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_OFF_VALUE		(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+#define IDLE_CYCLE_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
+#define IDLE_CYCLE_VALUE	(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
+				       u32 mask,
+				       u32 value)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
+		      mask, value,
+		      I915_READ(PCH_PP_STATUS),
+		      I915_READ(PCH_PP_CONTROL));
+
+	if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
+		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
+			  I915_READ(PCH_PP_STATUS),
+			  I915_READ(PCH_PP_CONTROL));
+	}
+}
+
+static void ironlake_wait_panel_on(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power on\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
+}
+
 static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
 {
-	unsigned long	off_time;
-	unsigned long	delay;
-
 	DRM_DEBUG_KMS("Wait for panel power off time\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
+}
 
-	if (ironlake_edp_have_panel_power(intel_dp) ||
-	    ironlake_edp_have_panel_vdd(intel_dp))
-	{
-		DRM_DEBUG_KMS("Panel still on, no delay needed\n");
-		return;
-	}
+static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power cycle\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
+}
 
-	off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay);
-	if (time_after(jiffies, off_time)) {
-		DRM_DEBUG_KMS("Time already passed");
-		return;
-	}
-	delay = jiffies_to_msecs(off_time - jiffies);
-	if (delay > intel_dp->panel_power_down_delay)
-		delay = intel_dp->panel_power_down_delay;
-	DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay);
-	msleep(delay);
+
+/* Read the current pp_control value, unlocking the register if it
+ * is locked
+ */
+
+static  u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
+{
+	u32	control = I915_READ(PCH_PP_CONTROL);
+
+	control &= ~PANEL_UNLOCK_MASK;
+	control |= PANEL_UNLOCK_REGS;
+	return control;
 }
 
 static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
@@ -920,15 +975,16 @@
 	     "eDP VDD already requested on\n");
 
 	intel_dp->want_panel_vdd = true;
+
 	if (ironlake_edp_have_panel_vdd(intel_dp)) {
 		DRM_DEBUG_KMS("eDP VDD already on\n");
 		return;
 	}
 
-	ironlake_wait_panel_off(intel_dp);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	if (!ironlake_edp_have_panel_power(intel_dp))
+		ironlake_wait_panel_power_cycle(intel_dp);
+
+	pp = ironlake_get_pp_control(dev_priv);
 	pp |= EDP_FORCE_VDD;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -951,9 +1007,7 @@
 	u32 pp;
 
 	if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
-		pp = I915_READ(PCH_PP_CONTROL);
-		pp &= ~PANEL_UNLOCK_MASK;
-		pp |= PANEL_UNLOCK_REGS;
+		pp = ironlake_get_pp_control(dev_priv);
 		pp &= ~EDP_FORCE_VDD;
 		I915_WRITE(PCH_PP_CONTROL, pp);
 		POSTING_READ(PCH_PP_CONTROL);
@@ -961,7 +1015,8 @@
 		/* Make sure sequencer is idle before allowing subsequent activity */
 		DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
 			      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
-		intel_dp->panel_off_jiffies = jiffies;
+
+		msleep(intel_dp->panel_power_down_delay);
 	}
 }
 
@@ -971,9 +1026,9 @@
 						 struct intel_dp, panel_vdd_work);
 	struct drm_device *dev = intel_dp->base.base.dev;
 
-	mutex_lock(&dev->struct_mutex);
+	mutex_lock(&dev->mode_config.mutex);
 	ironlake_panel_vdd_off_sync(intel_dp);
-	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
 }
 
 static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
@@ -983,7 +1038,7 @@
 
 	DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd);
 	WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
-	
+
 	intel_dp->want_panel_vdd = false;
 
 	if (sync) {
@@ -999,23 +1054,25 @@
 	}
 }
 
-/* Returns true if the panel was already on when called */
 static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
+	u32 pp;
 
 	if (!is_edp(intel_dp))
 		return;
-	if (ironlake_edp_have_panel_power(intel_dp))
+
+	DRM_DEBUG_KMS("Turn eDP power on\n");
+
+	if (ironlake_edp_have_panel_power(intel_dp)) {
+		DRM_DEBUG_KMS("eDP power already on\n");
 		return;
+	}
 
-	ironlake_wait_panel_off(intel_dp);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	ironlake_wait_panel_power_cycle(intel_dp);
 
+	pp = ironlake_get_pp_control(dev_priv);
 	if (IS_GEN5(dev)) {
 		/* ILK workaround: disable reset around power sequence */
 		pp &= ~PANEL_POWER_RESET;
@@ -1024,13 +1081,13 @@
 	}
 
 	pp |= POWER_TARGET_ON;
+	if (!IS_GEN5(dev))
+		pp |= PANEL_POWER_RESET;
+
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
 
-	if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask,
-		     5000))
-		DRM_ERROR("panel on wait timed out: 0x%08x\n",
-			  I915_READ(PCH_PP_STATUS));
+	ironlake_wait_panel_on(intel_dp);
 
 	if (IS_GEN5(dev)) {
 		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
@@ -1039,46 +1096,25 @@
 	}
 }
 
-static void ironlake_edp_panel_off(struct drm_encoder *encoder)
+static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK |
-		PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK;
+	u32 pp;
 
 	if (!is_edp(intel_dp))
 		return;
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
 
-	if (IS_GEN5(dev)) {
-		/* ILK workaround: disable reset around power sequence */
-		pp &= ~PANEL_POWER_RESET;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-	}
+	DRM_DEBUG_KMS("Turn eDP power off\n");
 
-	intel_dp->panel_off_jiffies = jiffies;
+	WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n");
 
-	if (IS_GEN5(dev)) {
-		pp &= ~POWER_TARGET_ON;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-		pp &= ~POWER_TARGET_ON;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-		msleep(intel_dp->panel_power_cycle_delay);
+	pp = ironlake_get_pp_control(dev_priv);
+	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
 
-		if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000))
-			DRM_ERROR("panel off wait timed out: 0x%08x\n",
-				  I915_READ(PCH_PP_STATUS));
-
-		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-	}
+	ironlake_wait_panel_off(intel_dp);
 }
 
 static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
@@ -1098,9 +1134,7 @@
 	 * allowing it to appear.
 	 */
 	msleep(intel_dp->backlight_on_delay);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	pp = ironlake_get_pp_control(dev_priv);
 	pp |= EDP_BLC_ENABLE;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -1116,9 +1150,7 @@
 		return;
 
 	DRM_DEBUG_KMS("\n");
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	pp = ironlake_get_pp_control(dev_priv);
 	pp &= ~EDP_BLC_ENABLE;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -1186,17 +1218,18 @@
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
+	ironlake_edp_backlight_off(intel_dp);
+	ironlake_edp_panel_off(intel_dp);
+
 	/* Wake up the sink first */
 	ironlake_edp_panel_vdd_on(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_link_down(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, false);
 
 	/* Make sure the panel is off before trying to
 	 * change the mode
 	 */
-	ironlake_edp_backlight_off(intel_dp);
-	intel_dp_link_down(intel_dp);
-	ironlake_edp_panel_off(encoder);
 }
 
 static void intel_dp_commit(struct drm_encoder *encoder)
@@ -1210,7 +1243,6 @@
 	intel_dp_start_link_train(intel_dp);
 	ironlake_edp_panel_on(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, true);
-
 	intel_dp_complete_link_train(intel_dp);
 	ironlake_edp_backlight_on(intel_dp);
 
@@ -1229,16 +1261,20 @@
 	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		ironlake_edp_backlight_off(intel_dp);
+		ironlake_edp_panel_off(intel_dp);
+
 		ironlake_edp_panel_vdd_on(intel_dp);
-		if (is_edp(intel_dp))
-			ironlake_edp_backlight_off(intel_dp);
 		intel_dp_sink_dpms(intel_dp, mode);
 		intel_dp_link_down(intel_dp);
-		ironlake_edp_panel_off(encoder);
-		if (is_edp(intel_dp) && !is_pch_edp(intel_dp))
-			ironlake_edp_pll_off(encoder);
 		ironlake_edp_panel_vdd_off(intel_dp, false);
+
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_off(encoder);
 	} else {
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_on(encoder);
+
 		ironlake_edp_panel_vdd_on(intel_dp);
 		intel_dp_sink_dpms(intel_dp, mode);
 		if (!(dp_reg & DP_PORT_EN)) {
@@ -1246,7 +1282,6 @@
 			ironlake_edp_panel_on(intel_dp);
 			ironlake_edp_panel_vdd_off(intel_dp, true);
 			intel_dp_complete_link_train(intel_dp);
-			ironlake_edp_backlight_on(intel_dp);
 		} else
 			ironlake_edp_panel_vdd_off(intel_dp, false);
 		ironlake_edp_backlight_on(intel_dp);
@@ -1284,11 +1319,11 @@
  * link status information
  */
 static bool
-intel_dp_get_link_status(struct intel_dp *intel_dp)
+intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
 	return intel_dp_aux_native_read_retry(intel_dp,
 					      DP_LANE0_1_STATUS,
-					      intel_dp->link_status,
+					      link_status,
 					      DP_LINK_STATUS_SIZE);
 }
 
@@ -1300,27 +1335,25 @@
 }
 
 static uint8_t
-intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+intel_get_adjust_request_voltage(uint8_t adjust_request[2],
 				 int lane)
 {
-	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int	    s = ((lane & 1) ?
 			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
 			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = adjust_request[lane>>1];
 
 	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
 }
 
 static uint8_t
-intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2],
 				      int lane)
 {
-	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int	    s = ((lane & 1) ?
 			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
 			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = adjust_request[lane>>1];
 
 	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
 }
@@ -1343,6 +1376,7 @@
  * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
  */
 #define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
+#define I830_DP_VOLTAGE_MAX_CPT	    DP_TRAIN_VOLTAGE_SWING_1200
 
 static uint8_t
 intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1361,15 +1395,18 @@
 }
 
 static void
-intel_get_adjust_train(struct intel_dp *intel_dp)
+intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
+	struct drm_device *dev = intel_dp->base.base.dev;
 	uint8_t v = 0;
 	uint8_t p = 0;
 	int lane;
+	uint8_t	*adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
+	int voltage_max;
 
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
-		uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane);
-		uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane);
+		uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane);
 
 		if (this_v > v)
 			v = this_v;
@@ -1377,8 +1414,12 @@
 			p = this_p;
 	}
 
-	if (v >= I830_DP_VOLTAGE_MAX)
-		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		voltage_max = I830_DP_VOLTAGE_MAX_CPT;
+	else
+		voltage_max = I830_DP_VOLTAGE_MAX;
+	if (v >= voltage_max)
+		v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
 
 	if (p >= intel_dp_pre_emphasis_max(v))
 		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
@@ -1388,7 +1429,7 @@
 }
 
 static uint32_t
-intel_dp_signal_levels(uint8_t train_set, int lane_count)
+intel_dp_signal_levels(uint8_t train_set)
 {
 	uint32_t	signal_levels = 0;
 
@@ -1457,9 +1498,8 @@
 intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
 		      int lane)
 {
-	int i = DP_LANE0_1_STATUS + (lane >> 1);
 	int s = (lane & 1) * 4;
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = link_status[lane>>1];
 
 	return (l >> s) & 0xf;
 }
@@ -1484,18 +1524,18 @@
 			 DP_LANE_CHANNEL_EQ_DONE|\
 			 DP_LANE_SYMBOL_LOCKED)
 static bool
-intel_channel_eq_ok(struct intel_dp *intel_dp)
+intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
 	uint8_t lane_align;
 	uint8_t lane_status;
 	int lane;
 
-	lane_align = intel_dp_link_status(intel_dp->link_status,
+	lane_align = intel_dp_link_status(link_status,
 					  DP_LANE_ALIGN_STATUS_UPDATED);
 	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
 		return false;
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
-		lane_status = intel_get_lane_status(intel_dp->link_status, lane);
+		lane_status = intel_get_lane_status(link_status, lane);
 		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
 			return false;
 	}
@@ -1520,8 +1560,9 @@
 
 	ret = intel_dp_aux_native_write(intel_dp,
 					DP_TRAINING_LANE0_SET,
-					intel_dp->train_set, 4);
-	if (ret != 4)
+					intel_dp->train_set,
+					intel_dp->lane_count);
+	if (ret != intel_dp->lane_count)
 		return false;
 
 	return true;
@@ -1537,7 +1578,7 @@
 	int i;
 	uint8_t voltage;
 	bool clock_recovery = false;
-	int tries;
+	int voltage_tries, loop_tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
 
@@ -1564,16 +1605,20 @@
 		DP &= ~DP_LINK_TRAIN_MASK;
 	memset(intel_dp->train_set, 0, 4);
 	voltage = 0xff;
-	tries = 0;
+	voltage_tries = 0;
+	loop_tries = 0;
 	clock_recovery = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 		uint32_t    signal_levels;
-		if (IS_GEN6(dev) && is_edp(intel_dp)) {
+
+		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
+			DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1589,10 +1634,13 @@
 		/* Set training pattern 1 */
 
 		udelay(100);
-		if (!intel_dp_get_link_status(intel_dp))
+		if (!intel_dp_get_link_status(intel_dp, link_status)) {
+			DRM_ERROR("failed to get link status\n");
 			break;
+		}
 
-		if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+		if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+			DRM_DEBUG_KMS("clock recovery OK\n");
 			clock_recovery = true;
 			break;
 		}
@@ -1601,20 +1649,30 @@
 		for (i = 0; i < intel_dp->lane_count; i++)
 			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
 				break;
-		if (i == intel_dp->lane_count)
-			break;
+		if (i == intel_dp->lane_count) {
+			++loop_tries;
+			if (loop_tries == 5) {
+				DRM_DEBUG_KMS("too many full retries, give up\n");
+				break;
+			}
+			memset(intel_dp->train_set, 0, 4);
+			voltage_tries = 0;
+			continue;
+		}
 
 		/* Check to see if we've tried the same voltage 5 times */
 		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
-			++tries;
-			if (tries == 5)
+			++voltage_tries;
+			if (voltage_tries == 5) {
+				DRM_DEBUG_KMS("too many voltage retries, give up\n");
 				break;
+			}
 		} else
-			tries = 0;
+			voltage_tries = 0;
 		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 
 		/* Compute new intel_dp->train_set as requested by target */
-		intel_get_adjust_train(intel_dp);
+		intel_get_adjust_train(intel_dp, link_status);
 	}
 
 	intel_dp->DP = DP;
@@ -1637,6 +1695,7 @@
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 
 		if (cr_tries > 5) {
 			DRM_ERROR("failed to train DP, aborting\n");
@@ -1644,11 +1703,11 @@
 			break;
 		}
 
-		if (IS_GEN6(dev) && is_edp(intel_dp)) {
+		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1664,17 +1723,17 @@
 			break;
 
 		udelay(400);
-		if (!intel_dp_get_link_status(intel_dp))
+		if (!intel_dp_get_link_status(intel_dp, link_status))
 			break;
 
 		/* Make sure clock is still ok */
-		if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+		if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
 			intel_dp_start_link_train(intel_dp);
 			cr_tries++;
 			continue;
 		}
 
-		if (intel_channel_eq_ok(intel_dp)) {
+		if (intel_channel_eq_ok(intel_dp, link_status)) {
 			channel_eq = true;
 			break;
 		}
@@ -1689,7 +1748,7 @@
 		}
 
 		/* Compute new intel_dp->train_set as requested by target */
-		intel_get_adjust_train(intel_dp);
+		intel_get_adjust_train(intel_dp, link_status);
 		++tries;
 	}
 
@@ -1734,8 +1793,12 @@
 
 	msleep(17);
 
-	if (is_edp(intel_dp))
-		DP |= DP_LINK_TRAIN_OFF;
+	if (is_edp(intel_dp)) {
+		if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+			DP |= DP_LINK_TRAIN_OFF_CPT;
+		else
+			DP |= DP_LINK_TRAIN_OFF;
+	}
 
 	if (!HAS_PCH_CPT(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -1821,6 +1884,7 @@
 intel_dp_check_link_status(struct intel_dp *intel_dp)
 {
 	u8 sink_irq_vector;
+	u8 link_status[DP_LINK_STATUS_SIZE];
 
 	if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
 		return;
@@ -1829,7 +1893,7 @@
 		return;
 
 	/* Try to read receiver status if the link appears to be up */
-	if (!intel_dp_get_link_status(intel_dp)) {
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
 		intel_dp_link_down(intel_dp);
 		return;
 	}
@@ -1854,7 +1918,7 @@
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
 	}
 
-	if (!intel_channel_eq_ok(intel_dp)) {
+	if (!intel_channel_eq_ok(intel_dp, link_status)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      drm_get_encoder_name(&intel_dp->base.base));
 		intel_dp_start_link_train(intel_dp);
@@ -2178,7 +2242,8 @@
 			continue;
 
 		intel_dp = enc_to_intel_dp(encoder);
-		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT)
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
 			return intel_dp->output_reg;
 	}
 
@@ -2320,7 +2385,7 @@
 
 		cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
 			PANEL_LIGHT_ON_DELAY_SHIFT;
-		
+
 		cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
 			PANEL_LIGHT_OFF_DELAY_SHIFT;
 
@@ -2353,11 +2418,10 @@
 		DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
 			      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
 
-		intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay;
-
 		ironlake_edp_panel_vdd_on(intel_dp);
 		ret = intel_dp_get_dpcd(intel_dp);
 		ironlake_edp_panel_vdd_off(intel_dp, false);
+
 		if (ret) {
 			if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
 				dev_priv->no_aux_handshake =
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 9ed5380e..d30cccc 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -28,6 +28,7 @@
  */
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm.h"
 #include "intel_drv.h"
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 499d4c0..21f60b7 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -326,7 +326,8 @@
 static int intel_panel_get_brightness(struct backlight_device *bd)
 {
 	struct drm_device *dev = bl_get_data(bd);
-	return intel_panel_get_backlight(dev);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->backlight_level;
 }
 
 static const struct backlight_ops intel_panel_bl_ops = {
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 6db3b1c..3003fb2 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c
index 42d3187..33daa29 100644
--- a/drivers/gpu/drm/mga/mga_drv.c
+++ b/drivers/gpu/drm/mga/mga_drv.c
@@ -29,6 +29,8 @@
  *    Gareth Hughes <gareth@valinux.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm.h"
 #include "mga_drm.h"
diff --git a/drivers/gpu/drm/mga/mga_warp.c b/drivers/gpu/drm/mga/mga_warp.c
index f172bd5..722a91b 100644
--- a/drivers/gpu/drm/mga/mga_warp.c
+++ b/drivers/gpu/drm/mga/mga_warp.c
@@ -30,6 +30,7 @@
 #include <linux/firmware.h>
 #include <linux/ihex.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include "drmP.h"
 #include "drm.h"
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 032a820..5fc201b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -640,10 +640,9 @@
 nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	uint32_t reg0 = nv_rd32(dev, reg + 0);
-	uint32_t reg1 = nv_rd32(dev, reg + 4);
 	struct nouveau_pll_vals pll;
 	struct pll_lims pll_limits;
+	u32 ctrl, mask, coef;
 	int ret;
 
 	ret = get_pll_limits(dev, reg, &pll_limits);
@@ -654,15 +653,20 @@
 	if (!clk)
 		return -ERANGE;
 
-	reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
-	reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
-
-	if (dev_priv->vbios.execute) {
-		still_alive();
-		nv_wr32(dev, reg + 4, reg1);
-		nv_wr32(dev, reg + 0, reg0);
+	coef = pll.N1 << 8 | pll.M1;
+	ctrl = pll.log2P << 16;
+	mask = 0x00070000;
+	if (reg == 0x004008) {
+		mask |= 0x01f80000;
+		ctrl |= (pll_limits.log2p_bias << 19);
+		ctrl |= (pll.log2P << 22);
 	}
 
+	if (!dev_priv->vbios.execute)
+		return 0;
+
+	nv_mask(dev, reg + 0, mask, ctrl);
+	nv_wr32(dev, reg + 4, coef);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 7226f41..7cc37e6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -148,7 +148,7 @@
 
 	if (dev_priv->card_type == NV_10 &&
 	    nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
-	    nvbo->bo.mem.num_pages < vram_pages / 2) {
+	    nvbo->bo.mem.num_pages < vram_pages / 4) {
 		/*
 		 * Make sure that the color and depth buffers are handled
 		 * by independent memory controller units. Up to a 9x
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index a319d564..bb6ec9e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -158,6 +158,7 @@
 	INIT_LIST_HEAD(&chan->nvsw.vbl_wait);
 	INIT_LIST_HEAD(&chan->nvsw.flip);
 	INIT_LIST_HEAD(&chan->fence.pending);
+	spin_lock_init(&chan->fence.lock);
 
 	/* setup channel's memory and vm */
 	ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle);
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index e0d275e..cea6696 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -710,7 +710,7 @@
 	case OUTPUT_DP:
 		max_clock  = nv_encoder->dp.link_nr;
 		max_clock *= nv_encoder->dp.link_bw;
-		clock = clock * nouveau_connector_bpp(connector) / 8;
+		clock = clock * nouveau_connector_bpp(connector) / 10;
 		break;
 	default:
 		BUG_ON(1);
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index ddbabef..b12fd2c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -369,3 +369,48 @@
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 	return 0;
 }
+
+int
+nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
+			    struct drm_mode_create_dumb *args)
+{
+	struct nouveau_bo *bo;
+	int ret;
+
+	args->pitch = roundup(args->width * (args->bpp / 8), 256);
+	args->size = args->pitch * args->height;
+	args->size = roundup(args->size, PAGE_SIZE);
+
+	ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+	if (ret)
+		return ret;
+
+	ret = drm_gem_handle_create(file_priv, bo->gem, &args->handle);
+	drm_gem_object_unreference_unlocked(bo->gem);
+	return ret;
+}
+
+int
+nouveau_display_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev,
+			     uint32_t handle)
+{
+	return drm_gem_handle_delete(file_priv, handle);
+}
+
+int
+nouveau_display_dumb_map_offset(struct drm_file *file_priv,
+				struct drm_device *dev,
+				uint32_t handle, uint64_t *poffset)
+{
+	struct drm_gem_object *gem;
+
+	gem = drm_gem_object_lookup(dev, file_priv, handle);
+	if (gem) {
+		struct nouveau_bo *bo = gem->driver_private;
+		*poffset = bo->bo.addr_space_offset;
+		drm_gem_object_unreference_unlocked(gem);
+		return 0;
+	}
+
+	return -ENOENT;
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index c1e01f3..9791d13 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/console.h>
+#include <linux/module.h>
 
 #include "drmP.h"
 #include "drm.h"
@@ -432,6 +433,10 @@
 	.gem_open_object = nouveau_gem_object_open,
 	.gem_close_object = nouveau_gem_object_close,
 
+	.dumb_create = nouveau_display_dumb_create,
+	.dumb_map_offset = nouveau_display_dumb_map_offset,
+	.dumb_destroy = nouveau_display_dumb_destroy,
+
 	.name = DRIVER_NAME,
 	.desc = DRIVER_DESC,
 #ifdef GIT_REVISION
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 29837da..4c0be3a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -1418,6 +1418,12 @@
 			   struct drm_pending_vblank_event *event);
 int nouveau_finish_page_flip(struct nouveau_channel *,
 			     struct nouveau_page_flip_state *);
+int nouveau_display_dumb_create(struct drm_file *, struct drm_device *,
+				struct drm_mode_create_dumb *args);
+int nouveau_display_dumb_map_offset(struct drm_file *, struct drm_device *,
+				    uint32_t handle, uint64_t *offset);
+int nouveau_display_dumb_destroy(struct drm_file *, struct drm_device *,
+				 uint32_t handle);
 
 /* nv10_gpio.c */
 int nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 14a8627..3a4cc32 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -487,6 +487,7 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_fbdev *nfbdev;
+	int preferred_bpp;
 	int ret;
 
 	nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
@@ -505,7 +506,15 @@
 	}
 
 	drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
-	drm_fb_helper_initial_config(&nfbdev->helper, 32);
+
+	if (dev_priv->vram_size <= 32 * 1024 * 1024)
+		preferred_bpp = 8;
+	else if (dev_priv->vram_size <= 64 * 1024 * 1024)
+		preferred_bpp = 16;
+	else
+		preferred_bpp = 32;
+
+	drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 81116cf..2f6daae 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -539,8 +539,6 @@
 			return ret;
 	}
 
-	INIT_LIST_HEAD(&chan->fence.pending);
-	spin_lock_init(&chan->fence.lock);
 	atomic_set(&chan->fence.last_sequence_irq, 0);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index f6a27fa..d39b220 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -22,6 +22,8 @@
  * Authors: Ben Skeggs
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "nouveau_drv.h"
 #include "nouveau_i2c.h"
@@ -331,7 +333,7 @@
 
 	NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index);
 
-	for (i = 0; info[i].addr; i++) {
+	for (i = 0; i2c && info[i].addr; i++) {
 		if (nouveau_probe_i2c_addr(i2c, info[i].addr) &&
 		    (!match || match(i2c, &info[i]))) {
 			NV_INFO(dev, "Detected %s: %s\n", what, info[i].type);
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 02222c5..960c0ae 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -680,7 +680,7 @@
 		return ret;
 	}
 
-	ret = drm_mm_init(&chan->ramin_heap, base, size);
+	ret = drm_mm_init(&chan->ramin_heap, base, size - base);
 	if (ret) {
 		NV_ERROR(dev, "Error creating PRAMIN heap: %d\n", ret);
 		nouveau_gpuobj_ref(NULL, &chan->ramin);
diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c
index 9f178aa..33d03fb 100644
--- a/drivers/gpu/drm/nouveau/nouveau_perf.c
+++ b/drivers/gpu/drm/nouveau/nouveau_perf.c
@@ -239,7 +239,7 @@
 	if(version == 0x15) {
 		memtimings->timing =
 				kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
-		if(!memtimings) {
+		if (!memtimings->timing) {
 			NV_WARN(dev,"Could not allocate memtiming table\n");
 			return;
 		}
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index b75258a..c8a463b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -67,7 +67,10 @@
 			pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages],
 				       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
 		}
+		nvbe->unmap_pages = false;
 	}
+
+	nvbe->pages = NULL;
 }
 
 static void
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 82478e0..d8831ab 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -579,6 +579,14 @@
 	if (ret)
 		goto out_display_early;
 
+	/* workaround an odd issue on nvc1 by disabling the device's
+	 * nosnoop capability.  hopefully won't cause issues until a
+	 * better fix is found - assuming there is one...
+	 */
+	if (dev_priv->chipset == 0xc1) {
+		nv_mask(dev, 0x00088080, 0x00000800, 0x00000000);
+	}
+
 	nouveau_pm_init(dev);
 
 	ret = engine->vram.init(dev);
@@ -1102,12 +1110,13 @@
 	dev_priv->noaccel = !!nouveau_noaccel;
 	if (nouveau_noaccel == -1) {
 		switch (dev_priv->chipset) {
-		case 0xc1: /* known broken */
-		case 0xc8: /* never tested */
+#if 0
+		case 0xXX: /* known broken */
 			NV_INFO(dev, "acceleration disabled by default, pass "
 				     "noaccel=0 to force enable\n");
 			dev_priv->noaccel = true;
 			break;
+#endif
 		default:
 			dev_priv->noaccel = false;
 			break;
diff --git a/drivers/gpu/drm/nouveau/nouveau_temp.c b/drivers/gpu/drm/nouveau/nouveau_temp.c
index 081ca7b..5a46446 100644
--- a/drivers/gpu/drm/nouveau/nouveau_temp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_temp.c
@@ -22,6 +22,8 @@
  * Authors: Martin Peres
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 
 #include "nouveau_drv.h"
diff --git a/drivers/gpu/drm/nouveau/nv40_pm.c b/drivers/gpu/drm/nouveau/nv40_pm.c
index bbc0b9c..e676b0d 100644
--- a/drivers/gpu/drm/nouveau/nv40_pm.c
+++ b/drivers/gpu/drm/nouveau/nv40_pm.c
@@ -57,12 +57,14 @@
 	int P = (ctrl & 0x00070000) >> 16;
 	u32 ref = 27000, clk = 0;
 
-	if (ctrl & 0x80000000)
+	if ((ctrl & 0x80000000) && M1) {
 		clk = ref * N1 / M1;
-
-	if (!(ctrl & 0x00000100)) {
-		if (ctrl & 0x40000000)
-			clk = clk * N2 / M2;
+		if ((ctrl & 0x40000100) == 0x40000000) {
+			if (M2)
+				clk = clk * N2 / M2;
+			else
+				clk = 0;
+		}
 	}
 
 	return clk >> P;
@@ -177,6 +179,11 @@
 	}
 
 	/* memory clock */
+	if (!perflvl->memory) {
+		info->mpll_ctrl = 0x00000000;
+		goto out;
+	}
+
 	ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory,
 			    &N1, &M1, &N2, &M2, &log2P);
 	if (ret < 0)
@@ -264,6 +271,9 @@
 	mdelay(5);
 	nv_mask(dev, 0x00c040, 0x00000333, info->ctrl);
 
+	if (!info->mpll_ctrl)
+		goto resume;
+
 	/* wait for vblank start on active crtcs, disable memory access */
 	for (i = 0; i < 2; i++) {
 		if (!(crtc_mask & (1 << i)))
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index d23ca00..06de250 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -616,7 +616,7 @@
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nv50_display *disp = nv50_display(dev);
 	u32 unk30 = nv_rd32(dev, 0x610030), mc;
-	int i, crtc, or, type = OUTPUT_ANY;
+	int i, crtc, or = 0, type = OUTPUT_ANY;
 
 	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
 	disp->irq.dcb = NULL;
@@ -708,7 +708,7 @@
 	struct nv50_display *disp = nv50_display(dev);
 	u32 unk30 = nv_rd32(dev, 0x610030), tmp, pclk, script, mc = 0;
 	struct dcb_entry *dcb;
-	int i, crtc, or, type = OUTPUT_ANY;
+	int i, crtc, or = 0, type = OUTPUT_ANY;
 
 	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
 	dcb = disp->irq.dcb;
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index 8c979b3..ac601f7 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -131,8 +131,8 @@
 	NV_DEBUG(dev, "\n");
 
 	/* master reset */
-	nv_mask(dev, 0x000200, 0x00200100, 0x00000000);
-	nv_mask(dev, 0x000200, 0x00200100, 0x00200100);
+	nv_mask(dev, 0x000200, 0x00201000, 0x00000000);
+	nv_mask(dev, 0x000200, 0x00201000, 0x00201000);
 	nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
 
 	/* reset/enable traps and interrupts */
diff --git a/drivers/gpu/drm/nouveau/nv50_grctx.c b/drivers/gpu/drm/nouveau/nv50_grctx.c
index d05c2c3..4b46d69 100644
--- a/drivers/gpu/drm/nouveau/nv50_grctx.c
+++ b/drivers/gpu/drm/nouveau/nv50_grctx.c
@@ -601,7 +601,7 @@
 					gr_def(ctx, offset + 0x1c, 0x00880000);
 					break;
 				case 0x86:
-					gr_def(ctx, offset + 0x1c, 0x008c0000);
+					gr_def(ctx, offset + 0x1c, 0x018c0000);
 					break;
 				case 0x92:
 				case 0x96:
diff --git a/drivers/gpu/drm/nouveau/nv50_vram.c b/drivers/gpu/drm/nouveau/nv50_vram.c
index 9da2383..2e45e57 100644
--- a/drivers/gpu/drm/nouveau/nv50_vram.c
+++ b/drivers/gpu/drm/nouveau/nv50_vram.c
@@ -160,7 +160,7 @@
 	colbits  =  (r4 & 0x0000f000) >> 12;
 	rowbitsa = ((r4 & 0x000f0000) >> 16) + 8;
 	rowbitsb = ((r4 & 0x00f00000) >> 20) + 8;
-	banks    = ((r4 & 0x01000000) ? 8 : 4);
+	banks    = 1 << (((r4 & 0x03000000) >> 24) + 2);
 
 	rowsize = parts * banks * (1 << colbits) * 8;
 	predicted = rowsize << rowbitsa;
diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c
index 4b8d0b3..ecfafd7 100644
--- a/drivers/gpu/drm/nouveau/nvc0_graph.c
+++ b/drivers/gpu/drm/nouveau/nvc0_graph.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/firmware.h>
+#include <linux/module.h>
 
 #include "drmP.h"
 
@@ -156,8 +157,8 @@
 	struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR);
 	struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR];
 	struct drm_device *dev = chan->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	int i = 0, gpc, tp, ret;
-	u32 magic;
 
 	ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM,
 				 &grch->unk408004);
@@ -206,14 +207,37 @@
 	nv_wo32(grch->mmio, i++ * 4, 0x0041880c);
 	nv_wo32(grch->mmio, i++ * 4, 0x80000018);
 
-	magic = 0x02180000;
-	nv_wo32(grch->mmio, i++ * 4, 0x00405830);
-	nv_wo32(grch->mmio, i++ * 4, magic);
-	for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
-		for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) {
-			u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800);
-			nv_wo32(grch->mmio, i++ * 4, reg);
-			nv_wo32(grch->mmio, i++ * 4, magic);
+	if (dev_priv->chipset != 0xc1) {
+		u32 magic = 0x02180000;
+		nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+		nv_wo32(grch->mmio, i++ * 4, magic);
+		for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x520);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, magic);
+				magic += 0x0324;
+			}
+		}
+	} else {
+		u32 magic = 0x02180000;
+		nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+		nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218);
+		nv_wo32(grch->mmio, i++ * 4, 0x004064c4);
+		nv_wo32(grch->mmio, i++ * 4, 0x0086ffff);
+		for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x520);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic);
+				magic += 0x0324;
+			}
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x544);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, magic);
+				magic += 0x0324;
+			}
 		}
 	}
 
@@ -357,6 +381,8 @@
 	u8  tpnr[GPC_MAX];
 	int i, gpc, tpc;
 
+	nv_wr32(dev, TP_UNIT(0, 0, 0x5c), 1); /* affects TFB offset queries */
+
 	/*
 	 *      TP      ROP UNKVAL(magic_not_rop_nr)
 	 * 450: 4/0/0/0 2        3
diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c
index dd0e6a7..96b0b93 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grctx.c
+++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c
@@ -1812,6 +1812,7 @@
 		/* calculate first set of magics */
 		memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
 
+		gpc = -1;
 		for (tp = 0; tp < priv->tp_total; tp++) {
 			do {
 				gpc = (gpc + 1) % priv->gpc_nr;
@@ -1861,30 +1862,26 @@
 
 	if (1) {
 		u32 tp_mask = 0, tp_set = 0;
-		u8  tpnr[GPC_MAX];
+		u8  tpnr[GPC_MAX], a, b;
 
 		memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
 		for (gpc = 0; gpc < priv->gpc_nr; gpc++)
 			tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8);
 
-		gpc = -1;
-		for (i = 0, gpc = -1; i < 32; i++) {
-			int ltp = i * (priv->tp_total - 1) / 32;
+		for (i = 0, gpc = -1, b = -1; i < 32; i++) {
+			a = (i * (priv->tp_total - 1)) / 32;
+			if (a != b) {
+				b = a;
+				do {
+					gpc = (gpc + 1) % priv->gpc_nr;
+				} while (!tpnr[gpc]);
+				tp = priv->tp_nr[gpc] - tpnr[gpc]--;
 
-			do {
-				gpc = (gpc + 1) % priv->gpc_nr;
-			} while (!tpnr[gpc]);
-			tp = priv->tp_nr[gpc] - tpnr[gpc]--;
+				tp_set |= 1 << ((gpc * 8) + tp);
+			}
 
-			tp_set |= 1 << ((gpc * 8) + tp);
-
-			do {
-				nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
-				tp_set ^= tp_mask;
-				nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set);
-				tp_set ^= tp_mask;
-			} while (ltp == (++i * (priv->tp_total - 1) / 32));
-			i--;
+			nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
+			nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask);
 		}
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c
index edbfe93..ce984d5 100644
--- a/drivers/gpu/drm/nouveau/nvc0_vram.c
+++ b/drivers/gpu/drm/nouveau/nvc0_vram.c
@@ -43,7 +43,7 @@
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3,
-	3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
+	3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
 	3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3,
 	3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0,
 	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0
@@ -110,22 +110,26 @@
 	u32 bsize = nv_rd32(dev, 0x10f20c);
 	u32 offset, length;
 	bool uniform = true;
-	int ret, i;
+	int ret, part;
 
 	NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800));
 	NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize);
 
 	/* read amount of vram attached to each memory controller */
-	for (i = 0; i < parts; i++) {
-		u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000));
+	part = 0;
+	while (parts) {
+		u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000));
+		if (psize == 0)
+			continue;
+		parts--;
+
 		if (psize != bsize) {
 			if (psize < bsize)
 				bsize = psize;
 			uniform = false;
 		}
 
-		NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize);
-
+		NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize);
 		dev_priv->vram_size += (u64)psize << 20;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c
index 23d63b4..cb006a7 100644
--- a/drivers/gpu/drm/nouveau/nvd0_display.c
+++ b/drivers/gpu/drm/nouveau/nvd0_display.c
@@ -780,7 +780,7 @@
 			continue;
 
 		if (nv_partner != nv_encoder &&
-		    nv_partner->dcb->or == nv_encoder->or) {
+		    nv_partner->dcb->or == nv_encoder->dcb->or) {
 			if (nv_partner->last_dpms == DRM_MODE_DPMS_ON)
 				return;
 			break;
diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c
index 570e190..bcac90b 100644
--- a/drivers/gpu/drm/r128/r128_cce.c
+++ b/drivers/gpu/drm/r128/r128_cce.c
@@ -32,6 +32,7 @@
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "drmP.h"
 #include "drm.h"
diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c
index b9e8efd..4c8796b 100644
--- a/drivers/gpu/drm/r128/r128_drv.c
+++ b/drivers/gpu/drm/r128/r128_drv.c
@@ -29,6 +29,8 @@
  *    Gareth Hughes <gareth@valinux.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm.h"
 #include "r128_drm.h"
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 9f363e0..cf8b4bc 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -70,7 +70,7 @@
 	r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \
 	r600_blit_kms.o radeon_pm.o atombios_dp.o r600_audio.o r600_hdmi.o \
 	evergreen.o evergreen_cs.o evergreen_blit_shaders.o evergreen_blit_kms.o \
-	radeon_trace_points.o ni.o cayman_blit_shaders.o
+	radeon_trace_points.o ni.o cayman_blit_shaders.o atombios_encoders.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index a515b2a..2b97262 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -558,7 +558,7 @@
 				bpc = connector->display_info.bpc;
 			encoder_mode = atombios_get_encoder_mode(encoder);
 			if ((radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) ||
-			    radeon_encoder_is_dp_bridge(encoder)) {
+			    (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) {
 				if (connector) {
 					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 					struct radeon_connector_atom_dig *dig_connector =
@@ -638,44 +638,29 @@
 				if (ss_enabled && ss->percentage)
 					args.v3.sInput.ucDispPllConfig |=
 						DISPPLL_CONFIG_SS_ENABLE;
-				if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT) ||
-				    radeon_encoder_is_dp_bridge(encoder)) {
+				if (ENCODER_MODE_IS_DP(encoder_mode)) {
+					args.v3.sInput.ucDispPllConfig |=
+						DISPPLL_CONFIG_COHERENT_MODE;
+					/* 16200 or 27000 */
+					args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
+				} else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
 					struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-					if (encoder_mode == ATOM_ENCODER_MODE_DP) {
+					if (encoder_mode == ATOM_ENCODER_MODE_HDMI)
+						/* deep color support */
+						args.v3.sInput.usPixelClock =
+							cpu_to_le16((mode->clock * bpc / 8) / 10);
+					if (dig->coherent_mode)
 						args.v3.sInput.ucDispPllConfig |=
 							DISPPLL_CONFIG_COHERENT_MODE;
-						/* 16200 or 27000 */
-						args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
-					} else {
-						if (encoder_mode == ATOM_ENCODER_MODE_HDMI) {
-							/* deep color support */
-							args.v3.sInput.usPixelClock =
-								cpu_to_le16((mode->clock * bpc / 8) / 10);
-						}
-						if (dig->coherent_mode)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_COHERENT_MODE;
-						if (mode->clock > 165000)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_DUAL_LINK;
-					}
-				} else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-					if (encoder_mode == ATOM_ENCODER_MODE_DP) {
+					if (mode->clock > 165000)
 						args.v3.sInput.ucDispPllConfig |=
-							DISPPLL_CONFIG_COHERENT_MODE;
-						/* 16200 or 27000 */
-						args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
-					} else if (encoder_mode != ATOM_ENCODER_MODE_LVDS) {
-						if (mode->clock > 165000)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_DUAL_LINK;
-					}
+							DISPPLL_CONFIG_DUAL_LINK;
 				}
-				if (radeon_encoder_is_dp_bridge(encoder)) {
-					struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-					struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
-					args.v3.sInput.ucExtTransmitterID = ext_radeon_encoder->encoder_id;
-				} else
+				if (radeon_encoder_get_dp_bridge_encoder_id(encoder) !=
+				    ENCODER_OBJECT_ID_NONE)
+					args.v3.sInput.ucExtTransmitterID =
+						radeon_encoder_get_dp_bridge_encoder_id(encoder);
+				else
 					args.v3.sInput.ucExtTransmitterID = 0;
 
 				atom_execute_table(rdev->mode_info.atom_context,
@@ -945,6 +930,7 @@
 		bpc = connector->display_info.bpc;
 
 		switch (encoder_mode) {
+		case ATOM_ENCODER_MODE_DP_MST:
 		case ATOM_ENCODER_MODE_DP:
 			/* DP/eDP */
 			dp_clock = dig_connector->dp_clock / 10;
@@ -1121,9 +1107,40 @@
 		return -EINVAL;
 	}
 
-	if (tiling_flags & RADEON_TILING_MACRO)
+	if (tiling_flags & RADEON_TILING_MACRO) {
+		if (rdev->family >= CHIP_CAYMAN)
+			tmp = rdev->config.cayman.tile_config;
+		else
+			tmp = rdev->config.evergreen.tile_config;
+
+		switch ((tmp & 0xf0) >> 4) {
+		case 0: /* 4 banks */
+			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK);
+			break;
+		case 1: /* 8 banks */
+		default:
+			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK);
+			break;
+		case 2: /* 16 banks */
+			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK);
+			break;
+		}
+
+		switch ((tmp & 0xf000) >> 12) {
+		case 0: /* 1KB rows */
+		default:
+			fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB);
+			break;
+		case 1: /* 2KB rows */
+			fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB);
+			break;
+		case 2: /* 4KB rows */
+			fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB);
+			break;
+		}
+
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1);
-	else if (tiling_flags & RADEON_TILING_MICRO)
+	} else if (tiling_flags & RADEON_TILING_MICRO)
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
 
 	switch (radeon_crtc->crtc_id) {
@@ -1450,7 +1467,7 @@
 				 * PPLL/DCPLL programming and only program the DP DTO for the
 				 * crtc virtual pixel clock.
 				 */
-				if (atombios_get_encoder_mode(test_encoder) == ATOM_ENCODER_MODE_DP) {
+				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
 					if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
 						return ATOM_PPLL_INVALID;
 				}
@@ -1536,12 +1553,6 @@
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = crtc->dev;
-	struct radeon_device *rdev = dev->dev_private;
-
-	/* adjust pm to upcoming mode change */
-	radeon_pm_compute_clocks(rdev);
-
 	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
 		return false;
 	return true;
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 79e8ebc..6fb335a 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -283,7 +283,7 @@
 		}
 	}
 
-	DRM_ERROR("aux i2c too many retries, giving up\n");
+	DRM_DEBUG_KMS("aux i2c too many retries, giving up\n");
 	return -EREMOTEIO;
 }
 
@@ -482,7 +482,8 @@
 	int bpp = convert_bpc_to_bpp(connector->display_info.bpc);
 	int lane_num, max_pix_clock;
 
-	if (radeon_connector_encoder_is_dp_bridge(connector))
+	if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+	    ENCODER_OBJECT_ID_NUTMEG)
 		return 270000;
 
 	lane_num = radeon_dp_get_dp_lane_number(connector, dpcd, pix_clock);
@@ -553,17 +554,32 @@
 {
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
 
 	if (!ASIC_IS_DCE4(rdev))
 		return;
 
-	if (radeon_connector_encoder_is_dp_bridge(connector))
+	if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+	    ENCODER_OBJECT_ID_NUTMEG)
 		panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
+	else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
+		 ENCODER_OBJECT_ID_TRAVIS)
+		panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+	else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
+		if (tmp & 1)
+			panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+	}
 
 	atombios_dig_encoder_setup(encoder,
 				   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
 				   panel_mode);
+
+	if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) &&
+	    (panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)) {
+		radeon_write_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_SET, 1);
+	}
 }
 
 void radeon_dp_set_link_config(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
new file mode 100644
index 0000000..39c04c1
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -0,0 +1,2369 @@
+/*
+ * Copyright 2007-11 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "atom.h"
+
+extern int atom_debug;
+
+/* evil but including atombios.h is much worse */
+bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
+				struct drm_display_mode *mode);
+
+
+static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct drm_connector *
+radeon_get_connector_for_encoder_init(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		if (radeon_encoder->devices & radeon_connector->devices)
+			return connector;
+	}
+	return NULL;
+}
+
+static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
+				   struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+
+	/* set the active encoder to connector routing */
+	radeon_encoder_set_active_device(encoder);
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	/* hw bug */
+	if ((mode->flags & DRM_MODE_FLAG_INTERLACE)
+	    && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
+		adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+
+	/* get the native mode for LVDS */
+	if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+		radeon_panel_mode_fixup(encoder, adjusted_mode);
+
+	/* get the native mode for TV */
+	if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
+		struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
+		if (tv_dac) {
+			if (tv_dac->tv_std == TV_STD_NTSC ||
+			    tv_dac->tv_std == TV_STD_NTSC_J ||
+			    tv_dac->tv_std == TV_STD_PAL_M)
+				radeon_atom_get_tv_timings(rdev, 0, adjusted_mode);
+			else
+				radeon_atom_get_tv_timings(rdev, 1, adjusted_mode);
+		}
+	}
+
+	if (ASIC_IS_DCE3(rdev) &&
+	    ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+	     (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE))) {
+		struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+		radeon_dp_set_link_config(connector, mode);
+	}
+
+	return true;
+}
+
+static void
+atombios_dac_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DAC_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+	struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
+		break;
+	}
+
+	args.ucAction = action;
+
+	if (radeon_encoder->active_device & (ATOM_DEVICE_CRT_SUPPORT))
+		args.ucDacStandard = ATOM_DAC1_PS2;
+	else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+		args.ucDacStandard = ATOM_DAC1_CV;
+	else {
+		switch (dac_info->tv_std) {
+		case TV_STD_PAL:
+		case TV_STD_PAL_M:
+		case TV_STD_SCART_PAL:
+		case TV_STD_SECAM:
+		case TV_STD_PAL_CN:
+			args.ucDacStandard = ATOM_DAC1_PAL;
+			break;
+		case TV_STD_NTSC:
+		case TV_STD_NTSC_J:
+		case TV_STD_PAL_60:
+		default:
+			args.ucDacStandard = ATOM_DAC1_NTSC;
+			break;
+		}
+	}
+	args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_tv_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	TV_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+	struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
+
+	memset(&args, 0, sizeof(args));
+
+	index = GetIndexIntoMasterTable(COMMAND, TVEncoderControl);
+
+	args.sTVEncoder.ucAction = action;
+
+	if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+		args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
+	else {
+		switch (dac_info->tv_std) {
+		case TV_STD_NTSC:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+			break;
+		case TV_STD_PAL:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL;
+			break;
+		case TV_STD_PAL_M:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PALM;
+			break;
+		case TV_STD_PAL_60:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL60;
+			break;
+		case TV_STD_NTSC_J:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSCJ;
+			break;
+		case TV_STD_SCART_PAL:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL; /* ??? */
+			break;
+		case TV_STD_SECAM:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_SECAM;
+			break;
+		case TV_STD_PAL_CN:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PALCN;
+			break;
+		default:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+			break;
+		}
+	}
+
+	args.sTVEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union dvo_encoder_control {
+	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
+};
+
+void
+atombios_dvo_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	union dvo_encoder_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+	uint8_t frev, crev;
+
+	memset(&args, 0, sizeof(args));
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+			/* R4xx, R5xx */
+			args.ext_tmds.sXTmdsEncoder.ucEnable = action;
+
+			if (radeon_encoder->pixel_clock > 165000)
+				args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+
+			args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
+			break;
+		case 2:
+			/* RS600/690/740 */
+			args.dvo.sDVOEncoder.ucAction = action;
+			args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			/* DFP1, CRT1, TV1 depending on the type of port */
+			args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
+
+			if (radeon_encoder->pixel_clock > 165000)
+				args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
+			break;
+		case 3:
+			/* R6xx */
+			args.dvo_v3.ucAction = action;
+			args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.dvo_v3.ucDVOConfig = 0; /* XXX */
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+union lvds_encoder_control {
+	LVDS_ENCODER_CONTROL_PS_ALLOCATION    v1;
+	LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 v2;
+};
+
+void
+atombios_digital_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+	union lvds_encoder_control args;
+	int index = 0;
+	int hdmi_detected = 0;
+	uint8_t frev, crev;
+
+	if (!dig)
+		return;
+
+	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
+		hdmi_detected = 1;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+		index = GetIndexIntoMasterTable(COMMAND, TMDS1EncoderControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, TMDS2EncoderControl);
+		break;
+	}
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+	case 2:
+		switch (crev) {
+		case 1:
+			args.v1.ucMisc = 0;
+			args.v1.ucAction = action;
+			if (hdmi_detected)
+				args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+					args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
+			} else {
+				if (dig->linkb)
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				/*if (pScrn->rgbBits == 8) */
+				args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
+			}
+			break;
+		case 2:
+		case 3:
+			args.v2.ucMisc = 0;
+			args.v2.ucAction = action;
+			if (crev == 3) {
+				if (dig->coherent_mode)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
+			}
+			if (hdmi_detected)
+				args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+			args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v2.ucTruncate = 0;
+			args.v2.ucSpatial = 0;
+			args.v2.ucTemporal = 0;
+			args.v2.ucFRC = 0;
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				if (dig->lcd_misc & ATOM_PANEL_MISC_SPATIAL) {
+					args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN;
+					if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+						args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH;
+				}
+				if (dig->lcd_misc & ATOM_PANEL_MISC_TEMPORAL) {
+					args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN;
+					if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
+						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH;
+					if (((dig->lcd_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2)
+						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4;
+				}
+			} else {
+				if (dig->linkb)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+			}
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+int
+atombios_get_encoder_mode(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct radeon_connector_atom_dig *dig_connector;
+
+	/* dp bridges are always DP */
+	if (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)
+		return ATOM_ENCODER_MODE_DP;
+
+	/* DVO is always DVO */
+	if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
+		return ATOM_ENCODER_MODE_DVO;
+
+	connector = radeon_get_connector_for_encoder(encoder);
+	/* if we don't have an active device yet, just use one of
+	 * the connectors tied to the encoder.
+	 */
+	if (!connector)
+		connector = radeon_get_connector_for_encoder_init(encoder);
+	radeon_connector = to_radeon_connector(connector);
+
+	switch (connector->connector_type) {
+	case DRM_MODE_CONNECTOR_DVII:
+	case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
+		if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+			/* fix me */
+			if (ASIC_IS_DCE4(rdev))
+				return ATOM_ENCODER_MODE_DVI;
+			else
+				return ATOM_ENCODER_MODE_HDMI;
+		} else if (radeon_connector->use_digital)
+			return ATOM_ENCODER_MODE_DVI;
+		else
+			return ATOM_ENCODER_MODE_CRT;
+		break;
+	case DRM_MODE_CONNECTOR_DVID:
+	case DRM_MODE_CONNECTOR_HDMIA:
+	default:
+		if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+			/* fix me */
+			if (ASIC_IS_DCE4(rdev))
+				return ATOM_ENCODER_MODE_DVI;
+			else
+				return ATOM_ENCODER_MODE_HDMI;
+		} else
+			return ATOM_ENCODER_MODE_DVI;
+		break;
+	case DRM_MODE_CONNECTOR_LVDS:
+		return ATOM_ENCODER_MODE_LVDS;
+		break;
+	case DRM_MODE_CONNECTOR_DisplayPort:
+		dig_connector = radeon_connector->con_priv;
+		if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+		    (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
+			return ATOM_ENCODER_MODE_DP;
+		else if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
+			/* fix me */
+			if (ASIC_IS_DCE4(rdev))
+				return ATOM_ENCODER_MODE_DVI;
+			else
+				return ATOM_ENCODER_MODE_HDMI;
+		} else
+			return ATOM_ENCODER_MODE_DVI;
+		break;
+	case DRM_MODE_CONNECTOR_eDP:
+		return ATOM_ENCODER_MODE_DP;
+	case DRM_MODE_CONNECTOR_DVIA:
+	case DRM_MODE_CONNECTOR_VGA:
+		return ATOM_ENCODER_MODE_CRT;
+		break;
+	case DRM_MODE_CONNECTOR_Composite:
+	case DRM_MODE_CONNECTOR_SVIDEO:
+	case DRM_MODE_CONNECTOR_9PinDIN:
+		/* fix me */
+		return ATOM_ENCODER_MODE_TV;
+		/*return ATOM_ENCODER_MODE_CV;*/
+		break;
+	}
+}
+
+/*
+ * DIG Encoder/Transmitter Setup
+ *
+ * DCE 3.0/3.1
+ * - 2 DIG transmitter blocks. UNIPHY (links A and B) and LVTMA.
+ * Supports up to 3 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1 can drive UNIPHY link A or link B
+ * DIG2 can drive UNIPHY link B or LVTMA
+ *
+ * DCE 3.2
+ * - 3 DIG transmitter blocks. UNIPHY0/1/2 (links A and B).
+ * Supports up to 5 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1/2 can drive UNIPHY0/1/2 link A or link B
+ *
+ * DCE 4.0/5.0
+ * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
+ * Supports up to 6 digital outputs
+ * - 6 DIG encoder blocks.
+ * - DIG to PHY mapping is hardcoded
+ * DIG1 drives UNIPHY0 link A, A+B
+ * DIG2 drives UNIPHY0 link B
+ * DIG3 drives UNIPHY1 link A, A+B
+ * DIG4 drives UNIPHY1 link B
+ * DIG5 drives UNIPHY2 link A, A+B
+ * DIG6 drives UNIPHY2 link B
+ *
+ * DCE 4.1
+ * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
+ * Supports up to 6 digital outputs
+ * - 2 DIG encoder blocks.
+ * DIG1/2 can drive UNIPHY0/1/2 link A or link B
+ *
+ * Routing
+ * crtc -> dig encoder -> UNIPHY/LVTMA (1 or 2 links)
+ * Examples:
+ * crtc0 -> dig2 -> LVTMA   links A+B -> TMDS/HDMI
+ * crtc1 -> dig1 -> UNIPHY0 link  B   -> DP
+ * crtc0 -> dig1 -> UNIPHY2 link  A   -> LVDS
+ * crtc1 -> dig2 -> UNIPHY1 link  B+A -> TMDS/HDMI
+ */
+
+union dig_encoder_control {
+	DIG_ENCODER_CONTROL_PS_ALLOCATION v1;
+	DIG_ENCODER_CONTROL_PARAMETERS_V2 v2;
+	DIG_ENCODER_CONTROL_PARAMETERS_V3 v3;
+	DIG_ENCODER_CONTROL_PARAMETERS_V4 v4;
+};
+
+void
+atombios_dig_encoder_setup(struct drm_encoder *encoder, int action, int panel_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+	union dig_encoder_control args;
+	int index = 0;
+	uint8_t frev, crev;
+	int dp_clock = 0;
+	int dp_lane_count = 0;
+	int hpd_id = RADEON_HPD_NONE;
+	int bpc = 8;
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		struct radeon_connector_atom_dig *dig_connector =
+			radeon_connector->con_priv;
+
+		dp_clock = dig_connector->dp_clock;
+		dp_lane_count = dig_connector->dp_lane_count;
+		hpd_id = radeon_connector->hpd.hpd;
+		bpc = connector->display_info.bpc;
+	}
+
+	/* no dig encoder assigned */
+	if (dig->dig_encoder == -1)
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	if (ASIC_IS_DCE4(rdev))
+		index = GetIndexIntoMasterTable(COMMAND, DIGxEncoderControl);
+	else {
+		if (dig->dig_encoder)
+			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+	}
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+			args.v1.ucAction = action;
+			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+				args.v3.ucPanelMode = panel_mode;
+			else
+				args.v1.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+				args.v1.ucLaneNum = dp_lane_count;
+			else if (radeon_encoder->pixel_clock > 165000)
+				args.v1.ucLaneNum = 8;
+			else
+				args.v1.ucLaneNum = 4;
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
+				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+				args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+				args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER2;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER3;
+				break;
+			}
+			if (dig->linkb)
+				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
+			else
+				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
+			break;
+		case 2:
+		case 3:
+			args.v3.ucAction = action;
+			args.v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+				args.v3.ucPanelMode = panel_mode;
+			else
+				args.v3.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+				args.v3.ucLaneNum = dp_lane_count;
+			else if (radeon_encoder->pixel_clock > 165000)
+				args.v3.ucLaneNum = 8;
+			else
+				args.v3.ucLaneNum = 4;
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
+				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
+			args.v3.acConfig.ucDigSel = dig->dig_encoder;
+			switch (bpc) {
+			case 0:
+				args.v3.ucBitPerColor = PANEL_BPC_UNDEFINE;
+				break;
+			case 6:
+				args.v3.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+				break;
+			case 8:
+			default:
+				args.v3.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+				break;
+			case 10:
+				args.v3.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+				break;
+			case 12:
+				args.v3.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+				break;
+			case 16:
+				args.v3.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+				break;
+			}
+			break;
+		case 4:
+			args.v4.ucAction = action;
+			args.v4.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
+				args.v4.ucPanelMode = panel_mode;
+			else
+				args.v4.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode))
+				args.v4.ucLaneNum = dp_lane_count;
+			else if (radeon_encoder->pixel_clock > 165000)
+				args.v4.ucLaneNum = 8;
+			else
+				args.v4.ucLaneNum = 4;
+
+			if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode)) {
+				if (dp_clock == 270000)
+					args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ;
+				else if (dp_clock == 540000)
+					args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ;
+			}
+			args.v4.acConfig.ucDigSel = dig->dig_encoder;
+			switch (bpc) {
+			case 0:
+				args.v4.ucBitPerColor = PANEL_BPC_UNDEFINE;
+				break;
+			case 6:
+				args.v4.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+				break;
+			case 8:
+			default:
+				args.v4.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+				break;
+			case 10:
+				args.v4.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+				break;
+			case 12:
+				args.v4.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+				break;
+			case 16:
+				args.v4.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+				break;
+			}
+			if (hpd_id == RADEON_HPD_NONE)
+				args.v4.ucHPD_ID = 0;
+			else
+				args.v4.ucHPD_ID = hpd_id + 1;
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union dig_transmitter_control {
+	DIG_TRANSMITTER_CONTROL_PS_ALLOCATION v1;
+	DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 v2;
+	DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 v3;
+	DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 v4;
+};
+
+void
+atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t lane_num, uint8_t lane_set)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+	struct drm_connector *connector;
+	union dig_transmitter_control args;
+	int index = 0;
+	uint8_t frev, crev;
+	bool is_dp = false;
+	int pll_id = 0;
+	int dp_clock = 0;
+	int dp_lane_count = 0;
+	int connector_object_id = 0;
+	int igp_lane_info = 0;
+	int dig_encoder = dig->dig_encoder;
+
+	if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+		connector = radeon_get_connector_for_encoder_init(encoder);
+		/* just needed to avoid bailing in the encoder check.  the encoder
+		 * isn't used for init
+		 */
+		dig_encoder = 0;
+	} else
+		connector = radeon_get_connector_for_encoder(encoder);
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		struct radeon_connector_atom_dig *dig_connector =
+			radeon_connector->con_priv;
+
+		dp_clock = dig_connector->dp_clock;
+		dp_lane_count = dig_connector->dp_lane_count;
+		connector_object_id =
+			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+		igp_lane_info = dig_connector->igp_lane_info;
+	}
+
+	if (encoder->crtc) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+		pll_id = radeon_crtc->pll_id;
+	}
+
+	/* no dig encoder assigned */
+	if (dig_encoder == -1)
+		return;
+
+	if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)))
+		is_dp = true;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		index = GetIndexIntoMasterTable(COMMAND, LVTMATransmitterControl);
+		break;
+	}
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+			args.v1.ucAction = action;
+			if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+				args.v1.usInitInfo = cpu_to_le16(connector_object_id);
+			} else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+				args.v1.asMode.ucLaneSel = lane_num;
+				args.v1.asMode.ucLaneSet = lane_set;
+			} else {
+				if (is_dp)
+					args.v1.usPixelClock =
+						cpu_to_le16(dp_clock / 10);
+				else if (radeon_encoder->pixel_clock > 165000)
+					args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+				else
+					args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			}
+
+			args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
+
+			if (dig_encoder)
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
+			else
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
+
+			if ((rdev->flags & RADEON_IS_IGP) &&
+			    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY)) {
+				if (is_dp || (radeon_encoder->pixel_clock <= 165000)) {
+					if (igp_lane_info & 0x1)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+					else if (igp_lane_info & 0x2)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
+					else if (igp_lane_info & 0x4)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
+					else if (igp_lane_info & 0x8)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
+				} else {
+					if (igp_lane_info & 0x3)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
+					else if (igp_lane_info & 0xc)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
+				}
+			}
+
+			if (dig->linkb)
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB;
+			else
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA;
+
+			if (is_dp)
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+			else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+				if (dig->coherent_mode)
+					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
+			}
+			break;
+		case 2:
+			args.v2.ucAction = action;
+			if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+				args.v2.usInitInfo = cpu_to_le16(connector_object_id);
+			} else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+				args.v2.asMode.ucLaneSel = lane_num;
+				args.v2.asMode.ucLaneSet = lane_set;
+			} else {
+				if (is_dp)
+					args.v2.usPixelClock =
+						cpu_to_le16(dp_clock / 10);
+				else if (radeon_encoder->pixel_clock > 165000)
+					args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+				else
+					args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			}
+
+			args.v2.acConfig.ucEncoderSel = dig_encoder;
+			if (dig->linkb)
+				args.v2.acConfig.ucLinkSel = 1;
+
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+				args.v2.acConfig.ucTransmitterSel = 0;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+				args.v2.acConfig.ucTransmitterSel = 1;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				args.v2.acConfig.ucTransmitterSel = 2;
+				break;
+			}
+
+			if (is_dp) {
+				args.v2.acConfig.fCoherentMode = 1;
+				args.v2.acConfig.fDPConnector = 1;
+			} else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+				if (dig->coherent_mode)
+					args.v2.acConfig.fCoherentMode = 1;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v2.acConfig.fDualLinkConnector = 1;
+			}
+			break;
+		case 3:
+			args.v3.ucAction = action;
+			if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+				args.v3.usInitInfo = cpu_to_le16(connector_object_id);
+			} else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+				args.v3.asMode.ucLaneSel = lane_num;
+				args.v3.asMode.ucLaneSet = lane_set;
+			} else {
+				if (is_dp)
+					args.v3.usPixelClock =
+						cpu_to_le16(dp_clock / 10);
+				else if (radeon_encoder->pixel_clock > 165000)
+					args.v3.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+				else
+					args.v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			}
+
+			if (is_dp)
+				args.v3.ucLaneNum = dp_lane_count;
+			else if (radeon_encoder->pixel_clock > 165000)
+				args.v3.ucLaneNum = 8;
+			else
+				args.v3.ucLaneNum = 4;
+
+			if (dig->linkb)
+				args.v3.acConfig.ucLinkSel = 1;
+			if (dig_encoder & 1)
+				args.v3.acConfig.ucEncoderSel = 1;
+
+			/* Select the PLL for the PHY
+			 * DP PHY should be clocked from external src if there is
+			 * one.
+			 */
+			/* On DCE4, if there is an external clock, it generates the DP ref clock */
+			if (is_dp && rdev->clock.dp_extclk)
+				args.v3.acConfig.ucRefClkSource = 2; /* external src */
+			else
+				args.v3.acConfig.ucRefClkSource = pll_id;
+
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+				args.v3.acConfig.ucTransmitterSel = 0;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+				args.v3.acConfig.ucTransmitterSel = 1;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				args.v3.acConfig.ucTransmitterSel = 2;
+				break;
+			}
+
+			if (is_dp)
+				args.v3.acConfig.fCoherentMode = 1; /* DP requires coherent */
+			else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+				if (dig->coherent_mode)
+					args.v3.acConfig.fCoherentMode = 1;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v3.acConfig.fDualLinkConnector = 1;
+			}
+			break;
+		case 4:
+			args.v4.ucAction = action;
+			if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+				args.v4.usInitInfo = cpu_to_le16(connector_object_id);
+			} else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
+				args.v4.asMode.ucLaneSel = lane_num;
+				args.v4.asMode.ucLaneSet = lane_set;
+			} else {
+				if (is_dp)
+					args.v4.usPixelClock =
+						cpu_to_le16(dp_clock / 10);
+				else if (radeon_encoder->pixel_clock > 165000)
+					args.v4.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+				else
+					args.v4.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			}
+
+			if (is_dp)
+				args.v4.ucLaneNum = dp_lane_count;
+			else if (radeon_encoder->pixel_clock > 165000)
+				args.v4.ucLaneNum = 8;
+			else
+				args.v4.ucLaneNum = 4;
+
+			if (dig->linkb)
+				args.v4.acConfig.ucLinkSel = 1;
+			if (dig_encoder & 1)
+				args.v4.acConfig.ucEncoderSel = 1;
+
+			/* Select the PLL for the PHY
+			 * DP PHY should be clocked from external src if there is
+			 * one.
+			 */
+			/* On DCE5 DCPLL usually generates the DP ref clock */
+			if (is_dp) {
+				if (rdev->clock.dp_extclk)
+					args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_EXTCLK;
+				else
+					args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_DCPLL;
+			} else
+				args.v4.acConfig.ucRefClkSource = pll_id;
+
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+				args.v4.acConfig.ucTransmitterSel = 0;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+				args.v4.acConfig.ucTransmitterSel = 1;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				args.v4.acConfig.ucTransmitterSel = 2;
+				break;
+			}
+
+			if (is_dp)
+				args.v4.acConfig.fCoherentMode = 1; /* DP requires coherent */
+			else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+				if (dig->coherent_mode)
+					args.v4.acConfig.fCoherentMode = 1;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v4.acConfig.fDualLinkConnector = 1;
+			}
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+bool
+atombios_set_edp_panel_power(struct drm_connector *connector, int action)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_device *dev = radeon_connector->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	union dig_transmitter_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+	uint8_t frev, crev;
+
+	if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+		goto done;
+
+	if (!ASIC_IS_DCE4(rdev))
+		goto done;
+
+	if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) &&
+	    (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
+		goto done;
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		goto done;
+
+	memset(&args, 0, sizeof(args));
+
+	args.v1.ucAction = action;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	/* wait for the panel to power up */
+	if (action == ATOM_TRANSMITTER_ACTION_POWER_ON) {
+		int i;
+
+		for (i = 0; i < 300; i++) {
+			if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
+				return true;
+			mdelay(1);
+		}
+		return false;
+	}
+done:
+	return true;
+}
+
+union external_encoder_control {
+	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
+	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 v3;
+};
+
+static void
+atombios_external_encoder_setup(struct drm_encoder *encoder,
+				struct drm_encoder *ext_encoder,
+				int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
+	union external_encoder_control args;
+	struct drm_connector *connector;
+	int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
+	u8 frev, crev;
+	int dp_clock = 0;
+	int dp_lane_count = 0;
+	int connector_object_id = 0;
+	u32 ext_enum = (ext_radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+	int bpc = 8;
+
+	if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
+		connector = radeon_get_connector_for_encoder_init(encoder);
+	else
+		connector = radeon_get_connector_for_encoder(encoder);
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		struct radeon_connector_atom_dig *dig_connector =
+			radeon_connector->con_priv;
+
+		dp_clock = dig_connector->dp_clock;
+		dp_lane_count = dig_connector->dp_lane_count;
+		connector_object_id =
+			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+		bpc = connector->display_info.bpc;
+	}
+
+	memset(&args, 0, sizeof(args));
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		/* no params on frev 1 */
+		break;
+	case 2:
+		switch (crev) {
+		case 1:
+		case 2:
+			args.v1.sDigEncoder.ucAction = action;
+			args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (ENCODER_MODE_IS_DP(args.v1.sDigEncoder.ucEncoderMode)) {
+				if (dp_clock == 270000)
+					args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+				args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
+			} else if (radeon_encoder->pixel_clock > 165000)
+				args.v1.sDigEncoder.ucLaneNum = 8;
+			else
+				args.v1.sDigEncoder.ucLaneNum = 4;
+			break;
+		case 3:
+			args.v3.sExtEncoder.ucAction = action;
+			if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
+				args.v3.sExtEncoder.usConnectorId = cpu_to_le16(connector_object_id);
+			else
+				args.v3.sExtEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v3.sExtEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (ENCODER_MODE_IS_DP(args.v3.sExtEncoder.ucEncoderMode)) {
+				if (dp_clock == 270000)
+					args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
+				else if (dp_clock == 540000)
+					args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ;
+				args.v3.sExtEncoder.ucLaneNum = dp_lane_count;
+			} else if (radeon_encoder->pixel_clock > 165000)
+				args.v3.sExtEncoder.ucLaneNum = 8;
+			else
+				args.v3.sExtEncoder.ucLaneNum = 4;
+			switch (ext_enum) {
+			case GRAPH_OBJECT_ENUM_ID1:
+				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER1;
+				break;
+			case GRAPH_OBJECT_ENUM_ID2:
+				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER2;
+				break;
+			case GRAPH_OBJECT_ENUM_ID3:
+				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER3;
+				break;
+			}
+			switch (bpc) {
+			case 0:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_BPC_UNDEFINE;
+				break;
+			case 6:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_6BIT_PER_COLOR;
+				break;
+			case 8:
+			default:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_8BIT_PER_COLOR;
+				break;
+			case 10:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_10BIT_PER_COLOR;
+				break;
+			case 12:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_12BIT_PER_COLOR;
+				break;
+			case 16:
+				args.v3.sExtEncoder.ucBitPerColor = PANEL_16BIT_PER_COLOR;
+				break;
+			}
+			break;
+		default:
+			DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+			return;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+		return;
+	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void
+atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	ENABLE_YUV_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableYUV);
+	uint32_t temp, reg;
+
+	memset(&args, 0, sizeof(args));
+
+	if (rdev->family >= CHIP_R600)
+		reg = R600_BIOS_3_SCRATCH;
+	else
+		reg = RADEON_BIOS_3_SCRATCH;
+
+	/* XXX: fix up scratch reg handling */
+	temp = RREG32(reg);
+	if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+		WREG32(reg, (ATOM_S3_TV1_ACTIVE |
+			     (radeon_crtc->crtc_id << 18)));
+	else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+		WREG32(reg, (ATOM_S3_CV_ACTIVE | (radeon_crtc->crtc_id << 24)));
+	else
+		WREG32(reg, 0);
+
+	if (enable)
+		args.ucEnable = ATOM_ENABLE;
+	args.ucCRTC = radeon_crtc->crtc_id;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	WREG32(reg, temp);
+}
+
+static void
+radeon_atom_encoder_dpms_avivo(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+		index = GetIndexIntoMasterTable(COMMAND, TMDSAOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, LVTMAOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+		else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+		else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
+		break;
+	default:
+		return;
+	}
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		args.ucAction = ATOM_ENABLE;
+		/* workaround for DVOOutputControl on some RS690 systems */
+		if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+			u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+			WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			WREG32(RADEON_BIOS_3_SCRATCH, reg);
+		} else
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+			args.ucAction = ATOM_LCD_BLON;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		}
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		args.ucAction = ATOM_DISABLE;
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+			args.ucAction = ATOM_LCD_BLOFF;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		}
+		break;
+	}
+}
+
+static void
+radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+	struct radeon_connector *radeon_connector = NULL;
+	struct radeon_connector_atom_dig *radeon_dig_connector = NULL;
+
+	if (connector) {
+		radeon_connector = to_radeon_connector(connector);
+		radeon_dig_connector = radeon_connector->con_priv;
+	}
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		/* some early dce3.2 boards have a bug in their transmitter control table */
+		if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+		else
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
+			if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+				atombios_set_edp_panel_power(connector,
+							     ATOM_TRANSMITTER_ACTION_POWER_ON);
+				radeon_dig_connector->edp_on = true;
+			}
+			if (ASIC_IS_DCE4(rdev))
+				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
+			radeon_dp_link_train(encoder, connector);
+			if (ASIC_IS_DCE4(rdev))
+				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
+		}
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
+			if (ASIC_IS_DCE4(rdev))
+				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
+			if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+				atombios_set_edp_panel_power(connector,
+							     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+				radeon_dig_connector->edp_on = false;
+			}
+		}
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
+		break;
+	}
+}
+
+static void
+radeon_atom_encoder_dpms_ext(struct drm_encoder *encoder,
+			     struct drm_encoder *ext_encoder,
+			     int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	default:
+		if (ASIC_IS_DCE41(rdev)) {
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
+		} else
+			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		if (ASIC_IS_DCE41(rdev)) {
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
+		} else
+			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
+		break;
+	}
+}
+
+static void
+radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+	DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
+		  radeon_encoder->encoder_id, mode, radeon_encoder->devices,
+		  radeon_encoder->active_device);
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		radeon_atom_encoder_dpms_avivo(encoder, mode);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		radeon_atom_encoder_dpms_dig(encoder, mode);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		if (ASIC_IS_DCE5(rdev)) {
+			switch (mode) {
+			case DRM_MODE_DPMS_ON:
+				atombios_dvo_setup(encoder, ATOM_ENABLE);
+				break;
+			case DRM_MODE_DPMS_STANDBY:
+			case DRM_MODE_DPMS_SUSPEND:
+			case DRM_MODE_DPMS_OFF:
+				atombios_dvo_setup(encoder, ATOM_DISABLE);
+				break;
+			}
+		} else if (ASIC_IS_DCE3(rdev))
+			radeon_atom_encoder_dpms_dig(encoder, mode);
+		else
+			radeon_atom_encoder_dpms_avivo(encoder, mode);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		if (ASIC_IS_DCE5(rdev)) {
+			switch (mode) {
+			case DRM_MODE_DPMS_ON:
+				atombios_dac_setup(encoder, ATOM_ENABLE);
+				break;
+			case DRM_MODE_DPMS_STANDBY:
+			case DRM_MODE_DPMS_SUSPEND:
+			case DRM_MODE_DPMS_OFF:
+				atombios_dac_setup(encoder, ATOM_DISABLE);
+				break;
+			}
+		} else
+			radeon_atom_encoder_dpms_avivo(encoder, mode);
+		break;
+	default:
+		return;
+	}
+
+	if (ext_encoder)
+		radeon_atom_encoder_dpms_ext(encoder, ext_encoder, mode);
+
+	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+
+}
+
+union crtc_source_param {
+	SELECT_CRTC_SOURCE_PS_ALLOCATION v1;
+	SELECT_CRTC_SOURCE_PARAMETERS_V2 v2;
+};
+
+static void
+atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	union crtc_source_param args;
+	int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
+	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *dig;
+
+	memset(&args, 0, sizeof(args));
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+		default:
+			if (ASIC_IS_AVIVO(rdev))
+				args.v1.ucCRTC = radeon_crtc->crtc_id;
+			else {
+				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) {
+					args.v1.ucCRTC = radeon_crtc->crtc_id;
+				} else {
+					args.v1.ucCRTC = radeon_crtc->crtc_id << 2;
+				}
+			}
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+				args.v1.ucDevice = ATOM_DEVICE_DFP1_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+			case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+				if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT)
+					args.v1.ucDevice = ATOM_DEVICE_LCD1_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_DFP3_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+			case ENCODER_OBJECT_ID_INTERNAL_DDI:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+				args.v1.ucDevice = ATOM_DEVICE_DFP2_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_CRT1_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_CRT2_INDEX;
+				break;
+			}
+			break;
+		case 2:
+			args.v2.ucCRTC = radeon_crtc->crtc_id;
+			if (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE) {
+				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+				if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
+				else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
+					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
+				else
+					args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+			} else
+				args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+				dig = radeon_encoder->enc_priv;
+				switch (dig->dig_encoder) {
+				case 0:
+					args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
+					break;
+				case 1:
+					args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+					break;
+				case 2:
+					args.v2.ucEncoderID = ASIC_INT_DIG3_ENCODER_ID;
+					break;
+				case 3:
+					args.v2.ucEncoderID = ASIC_INT_DIG4_ENCODER_ID;
+					break;
+				case 4:
+					args.v2.ucEncoderID = ASIC_INT_DIG5_ENCODER_ID;
+					break;
+				case 5:
+					args.v2.ucEncoderID = ASIC_INT_DIG6_ENCODER_ID;
+					break;
+				}
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+				args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else
+					args.v2.ucEncoderID = ASIC_INT_DAC1_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else
+					args.v2.ucEncoderID = ASIC_INT_DAC2_ENCODER_ID;
+				break;
+			}
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+		return;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	/* update scratch regs with new routing */
+	radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static void
+atombios_apply_encoder_quirks(struct drm_encoder *encoder,
+			      struct drm_display_mode *mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+
+	/* Funky macbooks */
+	if ((dev->pdev->device == 0x71C5) &&
+	    (dev->pdev->subsystem_vendor == 0x106b) &&
+	    (dev->pdev->subsystem_device == 0x0080)) {
+		if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+			uint32_t lvtma_bit_depth_control = RREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL);
+
+			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN;
+			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN;
+
+			WREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL, lvtma_bit_depth_control);
+		}
+	}
+
+	/* set scaler clears this on some chips */
+	if (ASIC_IS_AVIVO(rdev) &&
+	    (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)))) {
+		if (ASIC_IS_DCE4(rdev)) {
+			if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+				WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset,
+				       EVERGREEN_INTERLEAVE_EN);
+			else
+				WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
+		} else {
+			if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+				WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
+				       AVIVO_D1MODE_INTERLEAVE_EN);
+			else
+				WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
+		}
+	}
+}
+
+static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *test_encoder;
+	struct radeon_encoder_atom_dig *dig;
+	uint32_t dig_enc_in_use = 0;
+
+	/* DCE4/5 */
+	if (ASIC_IS_DCE4(rdev)) {
+		dig = radeon_encoder->enc_priv;
+		if (ASIC_IS_DCE41(rdev)) {
+			/* ontario follows DCE4 */
+			if (rdev->family == CHIP_PALM) {
+				if (dig->linkb)
+					return 1;
+				else
+					return 0;
+			} else
+				/* llano follows DCE3.2 */
+				return radeon_crtc->crtc_id;
+		} else {
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+				if (dig->linkb)
+					return 1;
+				else
+					return 0;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+				if (dig->linkb)
+					return 3;
+				else
+					return 2;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				if (dig->linkb)
+					return 5;
+				else
+					return 4;
+				break;
+			}
+		}
+	}
+
+	/* on DCE32 and encoder can driver any block so just crtc id */
+	if (ASIC_IS_DCE32(rdev)) {
+		return radeon_crtc->crtc_id;
+	}
+
+	/* on DCE3 - LVTMA can only be driven by DIGB */
+	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+		struct radeon_encoder *radeon_test_encoder;
+
+		if (encoder == test_encoder)
+			continue;
+
+		if (!radeon_encoder_is_digital(test_encoder))
+			continue;
+
+		radeon_test_encoder = to_radeon_encoder(test_encoder);
+		dig = radeon_test_encoder->enc_priv;
+
+		if (dig->dig_encoder >= 0)
+			dig_enc_in_use |= (1 << dig->dig_encoder);
+	}
+
+	if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
+		if (dig_enc_in_use & 0x2)
+			DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
+		return 1;
+	}
+	if (!(dig_enc_in_use & 1))
+		return 0;
+	return 1;
+}
+
+/* This only needs to be called once at startup */
+void
+radeon_atom_encoder_init(struct radeon_device *rdev)
+{
+	struct drm_device *dev = rdev->ddev;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+		struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT, 0, 0);
+			break;
+		default:
+			break;
+		}
+
+		if (ext_encoder && ASIC_IS_DCE41(rdev))
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT);
+	}
+}
+
+static void
+radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+	radeon_encoder->pixel_clock = adjusted_mode->clock;
+
+	if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
+		if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
+			atombios_yuv_setup(encoder, true);
+		else
+			atombios_yuv_setup(encoder, false);
+	}
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		if (ASIC_IS_DCE4(rdev)) {
+			/* disable the transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+			/* setup and enable the encoder */
+			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+
+			/* enable the transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+		} else {
+			/* disable the encoder and transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+
+			/* setup and enable the encoder and transmitter */
+			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+		}
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		atombios_dvo_setup(encoder, ATOM_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		atombios_dac_setup(encoder, ATOM_ENABLE);
+		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
+			if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+				atombios_tv_setup(encoder, ATOM_ENABLE);
+			else
+				atombios_tv_setup(encoder, ATOM_DISABLE);
+		}
+		break;
+	}
+
+	if (ext_encoder) {
+		if (ASIC_IS_DCE41(rdev))
+			atombios_external_encoder_setup(encoder, ext_encoder,
+							EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
+		else
+			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+	}
+
+	atombios_apply_encoder_quirks(encoder, adjusted_mode);
+
+	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
+		r600_hdmi_enable(encoder);
+		r600_hdmi_setmode(encoder, adjusted_mode);
+	}
+}
+
+static bool
+atombios_dac_load_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT |
+				       ATOM_DEVICE_CV_SUPPORT |
+				       ATOM_DEVICE_CRT_SUPPORT)) {
+		DAC_LOAD_DETECTION_PS_ALLOCATION args;
+		int index = GetIndexIntoMasterTable(COMMAND, DAC_LoadDetection);
+		uint8_t frev, crev;
+
+		memset(&args, 0, sizeof(args));
+
+		if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+			return false;
+
+		args.sDacload.ucMisc = 0;
+
+		if ((radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) ||
+		    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1))
+			args.sDacload.ucDacType = ATOM_DAC_A;
+		else
+			args.sDacload.ucDacType = ATOM_DAC_B;
+
+		if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT1_SUPPORT);
+		else if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT2_SUPPORT);
+		else if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CV_SUPPORT);
+			if (crev >= 3)
+				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+		} else if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_TV1_SUPPORT);
+			if (crev >= 3)
+				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+		}
+
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+		return true;
+	} else
+		return false;
+}
+
+static enum drm_connector_status
+radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	uint32_t bios_0_scratch;
+
+	if (!atombios_dac_load_detect(encoder, connector)) {
+		DRM_DEBUG_KMS("detect returned false \n");
+		return connector_status_unknown;
+	}
+
+	if (rdev->family >= CHIP_R600)
+		bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+	else
+		bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+
+	DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+	if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+			return connector_status_connected; /* CTV */
+		else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+			return connector_status_connected; /* STV */
+	}
+	return connector_status_disconnected;
+}
+
+static enum drm_connector_status
+radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+	u32 bios_0_scratch;
+
+	if (!ASIC_IS_DCE4(rdev))
+		return connector_status_unknown;
+
+	if (!ext_encoder)
+		return connector_status_unknown;
+
+	if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
+		return connector_status_unknown;
+
+	/* load detect on the dp bridge */
+	atombios_external_encoder_setup(encoder, ext_encoder,
+					EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
+
+	bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+
+	DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+	if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+			return connector_status_connected;
+	}
+	if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+			return connector_status_connected; /* CTV */
+		else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+			return connector_status_connected; /* STV */
+	}
+	return connector_status_disconnected;
+}
+
+void
+radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
+{
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+
+	if (ext_encoder)
+		/* ddc_setup on the dp bridge */
+		atombios_external_encoder_setup(encoder, ext_encoder,
+						EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
+
+}
+
+static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+	if ((radeon_encoder->active_device &
+	     (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+	    (radeon_encoder_get_dp_bridge_encoder_id(encoder) !=
+	     ENCODER_OBJECT_ID_NONE)) {
+		struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+		if (dig)
+			dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
+	}
+
+	radeon_atom_output_lock(encoder, true);
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+		/* select the clock/data port if it uses a router */
+		if (radeon_connector->router.cd_valid)
+			radeon_router_select_cd_port(radeon_connector);
+
+		/* turn eDP panel on for mode set */
+		if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_ON);
+	}
+
+	/* this is needed for the pll/ss setup to work correctly in some cases */
+	atombios_set_encoder_crtc_source(encoder);
+}
+
+static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
+{
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+	radeon_atom_output_lock(encoder, false);
+}
+
+static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig;
+
+	/* check for pre-DCE3 cards with shared encoders;
+	 * can't really use the links individually, so don't disable
+	 * the encoder if it's in use by another connector
+	 */
+	if (!ASIC_IS_DCE3(rdev)) {
+		struct drm_encoder *other_encoder;
+		struct radeon_encoder *other_radeon_encoder;
+
+		list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+			other_radeon_encoder = to_radeon_encoder(other_encoder);
+			if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+			    drm_helper_encoder_in_use(other_encoder))
+				goto disable_done;
+		}
+	}
+
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_DISABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		if (ASIC_IS_DCE4(rdev))
+			/* disable the transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+		else {
+			/* disable the encoder and transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+		}
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		atombios_dvo_setup(encoder, ATOM_DISABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		atombios_dac_setup(encoder, ATOM_DISABLE);
+		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+			atombios_tv_setup(encoder, ATOM_DISABLE);
+		break;
+	}
+
+disable_done:
+	if (radeon_encoder_is_digital(encoder)) {
+		if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
+			r600_hdmi_disable(encoder);
+		dig = radeon_encoder->enc_priv;
+		dig->dig_encoder = -1;
+	}
+	radeon_encoder->active_device = 0;
+}
+
+/* these are handled by the primary encoders */
+static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
+{
+
+}
+
+static void radeon_atom_ext_commit(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_mode_set(struct drm_encoder *encoder,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode)
+{
+
+}
+
+static void radeon_atom_ext_disable(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+
+}
+
+static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
+	.dpms = radeon_atom_ext_dpms,
+	.mode_fixup = radeon_atom_ext_mode_fixup,
+	.prepare = radeon_atom_ext_prepare,
+	.mode_set = radeon_atom_ext_mode_set,
+	.commit = radeon_atom_ext_commit,
+	.disable = radeon_atom_ext_disable,
+	/* no detect for TMDS/LVDS yet */
+};
+
+static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
+	.dpms = radeon_atom_encoder_dpms,
+	.mode_fixup = radeon_atom_mode_fixup,
+	.prepare = radeon_atom_encoder_prepare,
+	.mode_set = radeon_atom_encoder_mode_set,
+	.commit = radeon_atom_encoder_commit,
+	.disable = radeon_atom_encoder_disable,
+	.detect = radeon_atom_dig_detect,
+};
+
+static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
+	.dpms = radeon_atom_encoder_dpms,
+	.mode_fixup = radeon_atom_mode_fixup,
+	.prepare = radeon_atom_encoder_prepare,
+	.mode_set = radeon_atom_encoder_mode_set,
+	.commit = radeon_atom_encoder_commit,
+	.detect = radeon_atom_dac_detect,
+};
+
+void radeon_enc_destroy(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	kfree(radeon_encoder->enc_priv);
+	drm_encoder_cleanup(encoder);
+	kfree(radeon_encoder);
+}
+
+static const struct drm_encoder_funcs radeon_atom_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+struct radeon_encoder_atom_dac *
+radeon_atombios_set_dac_info(struct radeon_encoder *radeon_encoder)
+{
+	struct drm_device *dev = radeon_encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder_atom_dac *dac = kzalloc(sizeof(struct radeon_encoder_atom_dac), GFP_KERNEL);
+
+	if (!dac)
+		return NULL;
+
+	dac->tv_std = radeon_atombios_get_tv_info(rdev);
+	return dac;
+}
+
+struct radeon_encoder_atom_dig *
+radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
+{
+	int encoder_enum = (radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+	struct radeon_encoder_atom_dig *dig = kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
+
+	if (!dig)
+		return NULL;
+
+	/* coherent mode by default */
+	dig->coherent_mode = true;
+	dig->dig_encoder = -1;
+
+	if (encoder_enum == 2)
+		dig->linkb = true;
+	else
+		dig->linkb = false;
+
+	return dig;
+}
+
+void
+radeon_add_atom_encoder(struct drm_device *dev,
+			uint32_t encoder_enum,
+			uint32_t supported_device,
+			u16 caps)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct radeon_encoder *radeon_encoder;
+
+	/* see if we already added it */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		radeon_encoder = to_radeon_encoder(encoder);
+		if (radeon_encoder->encoder_enum == encoder_enum) {
+			radeon_encoder->devices |= supported_device;
+			return;
+		}
+
+	}
+
+	/* add a new one */
+	radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
+	if (!radeon_encoder)
+		return;
+
+	encoder = &radeon_encoder->base;
+	switch (rdev->num_crtc) {
+	case 1:
+		encoder->possible_crtcs = 0x1;
+		break;
+	case 2:
+	default:
+		encoder->possible_crtcs = 0x3;
+		break;
+	case 4:
+		encoder->possible_crtcs = 0xf;
+		break;
+	case 6:
+		encoder->possible_crtcs = 0x3f;
+		break;
+	}
+
+	radeon_encoder->enc_priv = NULL;
+
+	radeon_encoder->encoder_enum = encoder_enum;
+	radeon_encoder->encoder_id = (encoder_enum & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+	radeon_encoder->devices = supported_device;
+	radeon_encoder->rmx_type = RMX_OFF;
+	radeon_encoder->underscan_type = UNDERSCAN_OFF;
+	radeon_encoder->is_ext_encoder = false;
+	radeon_encoder->caps = caps;
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+			radeon_encoder->rmx_type = RMX_FULL;
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		} else {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+		}
+		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+		radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
+		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TVDAC);
+		radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
+		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+			radeon_encoder->rmx_type = RMX_FULL;
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		} else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+		} else {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+		}
+		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_SI170B:
+	case ENCODER_OBJECT_ID_CH7303:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
+	case ENCODER_OBJECT_ID_TITFP513:
+	case ENCODER_OBJECT_ID_VT1623:
+	case ENCODER_OBJECT_ID_HDMI_SI1930:
+	case ENCODER_OBJECT_ID_TRAVIS:
+	case ENCODER_OBJECT_ID_NUTMEG:
+		/* these are handled by the primary encoders */
+		radeon_encoder->is_ext_encoder = true;
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+		else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+		else
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
+		break;
+	}
+}
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index ed406e8..5e00d16 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -82,6 +82,7 @@
 {
 	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id];
 	u32 tmp = RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset);
+	int i;
 
 	/* Lock the graphics update lock */
 	tmp |= EVERGREEN_GRPH_UPDATE_LOCK;
@@ -99,7 +100,11 @@
 	       (u32)crtc_base);
 
 	/* Wait for update_pending to go high. */
-	while (!(RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING));
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		if (RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING)
+			break;
+		udelay(1);
+	}
 	DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n");
 
 	/* Unlock the lock, so double-buffering can take place inside vblank */
@@ -157,6 +162,57 @@
 	return actual_temp * 1000;
 }
 
+void sumo_pm_init_profile(struct radeon_device *rdev)
+{
+	int idx;
+
+	/* default */
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
+
+	/* low,mid sh/mh */
+	if (rdev->flags & RADEON_IS_MOBILITY)
+		idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+	else
+		idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
+
+	/* high sh/mh */
+	idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx =
+		rdev->pm.power_state[idx].num_clock_modes - 1;
+
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx =
+		rdev->pm.power_state[idx].num_clock_modes - 1;
+}
+
 void evergreen_pm_misc(struct radeon_device *rdev)
 {
 	int req_ps_idx = rdev->pm.requested_power_state_index;
@@ -353,6 +409,7 @@
 		default:
 			break;
 		}
+		radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
 	}
 	if (rdev->irq.installed)
 		evergreen_irq_set(rdev);
@@ -893,7 +950,7 @@
 	u32 tmp;
 	int r;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -945,7 +1002,6 @@
 void evergreen_pcie_gart_disable(struct radeon_device *rdev)
 {
 	u32 tmp;
-	int r;
 
 	/* Disable all tables */
 	WREG32(VM_CONTEXT0_CNTL, 0);
@@ -965,14 +1021,7 @@
 	WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void evergreen_pcie_gart_fini(struct radeon_device *rdev)
@@ -1226,7 +1275,7 @@
 		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
 			rdev->mc.vram_end >> 12);
 	}
-	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
 	if (rdev->flags & RADEON_IS_IGP) {
 		tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF;
 		tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24;
@@ -3031,6 +3080,10 @@
 		}
 	}
 
+	r = r600_vram_scratch_init(rdev);
+	if (r)
+		return r;
+
 	evergreen_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		evergreen_agp_enable(rdev);
@@ -3235,6 +3288,7 @@
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	evergreen_pcie_gart_fini(rdev);
+	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_agp_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
index dcf11bb..914e5af 100644
--- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c
+++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
@@ -94,6 +94,15 @@
 	else
 		cp_coher_size = ((size + 255) >> 8);
 
+	if (rdev->family >= CHIP_CAYMAN) {
+		/* CP_COHER_CNTL2 has to be set manually when submitting a surface_sync
+		 * to the RB directly. For IBs, the CP programs this as part of the
+		 * surface_sync packet.
+		 */
+		radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+		radeon_ring_write(rdev, (0x85e8 - PACKET3_SET_CONFIG_REG_START) >> 2);
+		radeon_ring_write(rdev, 0); /* CP_COHER_CNTL2 */
+	}
 	radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
 	radeon_ring_write(rdev, sync_type);
 	radeon_ring_write(rdev, cp_coher_size);
@@ -174,7 +183,7 @@
 static void
 set_tex_resource(struct radeon_device *rdev,
 		 int format, int w, int h, int pitch,
-		 u64 gpu_addr)
+		 u64 gpu_addr, u32 size)
 {
 	u32 sq_tex_resource_word0, sq_tex_resource_word1;
 	u32 sq_tex_resource_word4, sq_tex_resource_word7;
@@ -196,6 +205,9 @@
 	sq_tex_resource_word7 = format |
 		S__SQ_CONSTANT_TYPE(SQ_TEX_VTX_VALID_TEXTURE);
 
+	cp_set_surface_sync(rdev,
+			    PACKET3_TC_ACTION_ENA, size, gpu_addr);
+
 	radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 8));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_write(rdev, sq_tex_resource_word0);
@@ -613,11 +625,13 @@
 	rdev->r600_blit.primitives.set_default_state = set_default_state;
 
 	rdev->r600_blit.ring_size_common = 55; /* shaders + def state */
-	rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+	rdev->r600_blit.ring_size_common += 16; /* fence emit for VB IB */
 	rdev->r600_blit.ring_size_common += 5; /* done copy */
-	rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+	rdev->r600_blit.ring_size_common += 16; /* fence emit for done copy */
 
 	rdev->r600_blit.ring_size_per_loop = 74;
+	if (rdev->family >= CHIP_CAYMAN)
+		rdev->r600_blit.ring_size_per_loop += 9; /* additional DWs for surface sync */
 
 	rdev->r600_blit.max_dim = 16384;
 
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 7fdfa8e..cd4590a 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -38,6 +38,7 @@
 	u32			group_size;
 	u32			nbanks;
 	u32			npipes;
+	u32			row_size;
 	/* value we track */
 	u32			nsamples;
 	u32			cb_color_base_last[12];
@@ -77,6 +78,44 @@
 	struct radeon_bo	*db_s_write_bo;
 };
 
+static u32 evergreen_cs_get_aray_mode(u32 tiling_flags)
+{
+	if (tiling_flags & RADEON_TILING_MACRO)
+		return ARRAY_2D_TILED_THIN1;
+	else if (tiling_flags & RADEON_TILING_MICRO)
+		return ARRAY_1D_TILED_THIN1;
+	else
+		return ARRAY_LINEAR_GENERAL;
+}
+
+static u32 evergreen_cs_get_num_banks(u32 nbanks)
+{
+	switch (nbanks) {
+	case 2:
+		return ADDR_SURF_2_BANK;
+	case 4:
+		return ADDR_SURF_4_BANK;
+	case 8:
+	default:
+		return ADDR_SURF_8_BANK;
+	case 16:
+		return ADDR_SURF_16_BANK;
+	}
+}
+
+static u32 evergreen_cs_get_tile_split(u32 row_size)
+{
+	switch (row_size) {
+	case 1:
+	default:
+		return ADDR_SURF_TILE_SPLIT_1KB;
+	case 2:
+		return ADDR_SURF_TILE_SPLIT_2KB;
+	case 4:
+		return ADDR_SURF_TILE_SPLIT_4KB;
+	}
+}
+
 static void evergreen_cs_track_init(struct evergreen_cs_track *track)
 {
 	int i;
@@ -480,21 +519,22 @@
 		}
 		break;
 	case DB_Z_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		track->db_z_info = radeon_get_ib_value(p, idx);
-		ib[idx] &= ~Z_ARRAY_MODE(0xf);
-		track->db_z_info &= ~Z_ARRAY_MODE(0xf);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else {
-			ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			ib[idx] &= ~Z_ARRAY_MODE(0xf);
+			track->db_z_info &= ~Z_ARRAY_MODE(0xf);
+			ib[idx] |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
+			track->db_z_info |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= DB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks));
+				ib[idx] |= DB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size));
+			}
 		}
 		break;
 	case DB_STENCIL_INFO:
@@ -607,40 +647,34 @@
 	case CB_COLOR5_INFO:
 	case CB_COLOR6_INFO:
 	case CB_COLOR7_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		tmp = (reg - CB_COLOR0_INFO) / 0x3c;
 		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
 		}
 		break;
 	case CB_COLOR8_INFO:
 	case CB_COLOR9_INFO:
 	case CB_COLOR10_INFO:
 	case CB_COLOR11_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8;
 		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
+			track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
 		}
 		break;
 	case CB_COLOR0_PITCH:
@@ -695,6 +729,16 @@
 	case CB_COLOR9_ATTRIB:
 	case CB_COLOR10_ATTRIB:
 	case CB_COLOR11_ATTRIB:
+		r = evergreen_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					"0x%04X\n", reg);
+			return -EINVAL;
+		}
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+			ib[idx] |= CB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks));
+			ib[idx] |= CB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size));
+		}
 		break;
 	case CB_COLOR0_DIM:
 	case CB_COLOR1_DIM:
@@ -1311,10 +1355,16 @@
 					return -EINVAL;
 				}
 				ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
-				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				if (!p->keep_tiling_flags) {
+					ib[idx+1+(i*8)+1] |=
+						TEX_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags));
+					if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+						ib[idx+1+(i*8)+6] |=
+							TEX_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size));
+						ib[idx+1+(i*8)+7] |=
+							TEX_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks));
+					}
+				}
 				texture = reloc->robj;
 				/* tex mip base */
 				r = evergreen_cs_packet_next_reloc(p, &reloc);
@@ -1414,6 +1464,7 @@
 {
 	struct radeon_cs_packet pkt;
 	struct evergreen_cs_track *track;
+	u32 tmp;
 	int r;
 
 	if (p->track == NULL) {
@@ -1422,9 +1473,63 @@
 		if (track == NULL)
 			return -ENOMEM;
 		evergreen_cs_track_init(track);
-		track->npipes = p->rdev->config.evergreen.tiling_npipes;
-		track->nbanks = p->rdev->config.evergreen.tiling_nbanks;
-		track->group_size = p->rdev->config.evergreen.tiling_group_size;
+		if (p->rdev->family >= CHIP_CAYMAN)
+			tmp = p->rdev->config.cayman.tile_config;
+		else
+			tmp = p->rdev->config.evergreen.tile_config;
+
+		switch (tmp & 0xf) {
+		case 0:
+			track->npipes = 1;
+			break;
+		case 1:
+		default:
+			track->npipes = 2;
+			break;
+		case 2:
+			track->npipes = 4;
+			break;
+		case 3:
+			track->npipes = 8;
+			break;
+		}
+
+		switch ((tmp & 0xf0) >> 4) {
+		case 0:
+			track->nbanks = 4;
+			break;
+		case 1:
+		default:
+			track->nbanks = 8;
+			break;
+		case 2:
+			track->nbanks = 16;
+			break;
+		}
+
+		switch ((tmp & 0xf00) >> 8) {
+		case 0:
+			track->group_size = 256;
+			break;
+		case 1:
+		default:
+			track->group_size = 512;
+			break;
+		}
+
+		switch ((tmp & 0xf000) >> 12) {
+		case 0:
+			track->row_size = 1;
+			break;
+		case 1:
+		default:
+			track->row_size = 2;
+			break;
+		case 2:
+			track->row_size = 4;
+			break;
+		}
+
 		p->track = track;
 	}
 	do {
diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h
index c781c92..7d7f215 100644
--- a/drivers/gpu/drm/radeon/evergreen_reg.h
+++ b/drivers/gpu/drm/radeon/evergreen_reg.h
@@ -42,6 +42,17 @@
 #       define EVERGREEN_GRPH_DEPTH_8BPP                0
 #       define EVERGREEN_GRPH_DEPTH_16BPP               1
 #       define EVERGREEN_GRPH_DEPTH_32BPP               2
+#       define EVERGREEN_GRPH_NUM_BANKS(x)              (((x) & 0x3) << 2)
+#       define EVERGREEN_ADDR_SURF_2_BANK               0
+#       define EVERGREEN_ADDR_SURF_4_BANK               1
+#       define EVERGREEN_ADDR_SURF_8_BANK               2
+#       define EVERGREEN_ADDR_SURF_16_BANK              3
+#       define EVERGREEN_GRPH_Z(x)                      (((x) & 0x3) << 4)
+#       define EVERGREEN_GRPH_BANK_WIDTH(x)             (((x) & 0x3) << 6)
+#       define EVERGREEN_ADDR_SURF_BANK_WIDTH_1         0
+#       define EVERGREEN_ADDR_SURF_BANK_WIDTH_2         1
+#       define EVERGREEN_ADDR_SURF_BANK_WIDTH_4         2
+#       define EVERGREEN_ADDR_SURF_BANK_WIDTH_8         3
 #       define EVERGREEN_GRPH_FORMAT(x)                 (((x) & 0x7) << 8)
 /* 8 BPP */
 #       define EVERGREEN_GRPH_FORMAT_INDEXED            0
@@ -61,6 +72,24 @@
 #       define EVERGREEN_GRPH_FORMAT_8B_BGRA1010102     5
 #       define EVERGREEN_GRPH_FORMAT_RGB111110          6
 #       define EVERGREEN_GRPH_FORMAT_BGR101111          7
+#       define EVERGREEN_GRPH_BANK_HEIGHT(x)            (((x) & 0x3) << 11)
+#       define EVERGREEN_ADDR_SURF_BANK_HEIGHT_1        0
+#       define EVERGREEN_ADDR_SURF_BANK_HEIGHT_2        1
+#       define EVERGREEN_ADDR_SURF_BANK_HEIGHT_4        2
+#       define EVERGREEN_ADDR_SURF_BANK_HEIGHT_8        3
+#       define EVERGREEN_GRPH_TILE_SPLIT(x)             (((x) & 0x7) << 13)
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_64B       0
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_128B      1
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_256B      2
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_512B      3
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB       4
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB       5
+#       define EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB       6
+#       define EVERGREEN_GRPH_MACRO_TILE_ASPECT(x)      (((x) & 0x3) << 18)
+#       define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_1  0
+#       define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_2  1
+#       define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_4  2
+#       define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_8  3
 #       define EVERGREEN_GRPH_ARRAY_MODE(x)             (((x) & 0x7) << 20)
 #       define EVERGREEN_GRPH_ARRAY_LINEAR_GENERAL      0
 #       define EVERGREEN_GRPH_ARRAY_LINEAR_ALIGNED      1
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index b937c49..e00039e 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -899,6 +899,10 @@
 #define DB_HTILE_DATA_BASE				0x28014
 #define DB_Z_INFO					0x28040
 #       define Z_ARRAY_MODE(x)                          ((x) << 4)
+#       define DB_TILE_SPLIT(x)                         (((x) & 0x7) << 8)
+#       define DB_NUM_BANKS(x)                          (((x) & 0x3) << 12)
+#       define DB_BANK_WIDTH(x)                         (((x) & 0x3) << 16)
+#       define DB_BANK_HEIGHT(x)                        (((x) & 0x3) << 20)
 #define DB_STENCIL_INFO					0x28044
 #define DB_Z_READ_BASE					0x28048
 #define DB_STENCIL_READ_BASE				0x2804c
@@ -951,6 +955,29 @@
 #	define CB_SF_EXPORT_FULL			0
 #	define CB_SF_EXPORT_NORM			1
 #define	CB_COLOR0_ATTRIB				0x28c74
+#       define CB_TILE_SPLIT(x)                         (((x) & 0x7) << 5)
+#       define ADDR_SURF_TILE_SPLIT_64B                 0
+#       define ADDR_SURF_TILE_SPLIT_128B                1
+#       define ADDR_SURF_TILE_SPLIT_256B                2
+#       define ADDR_SURF_TILE_SPLIT_512B                3
+#       define ADDR_SURF_TILE_SPLIT_1KB                 4
+#       define ADDR_SURF_TILE_SPLIT_2KB                 5
+#       define ADDR_SURF_TILE_SPLIT_4KB                 6
+#       define CB_NUM_BANKS(x)                          (((x) & 0x3) << 10)
+#       define ADDR_SURF_2_BANK                         0
+#       define ADDR_SURF_4_BANK                         1
+#       define ADDR_SURF_8_BANK                         2
+#       define ADDR_SURF_16_BANK                        3
+#       define CB_BANK_WIDTH(x)                         (((x) & 0x3) << 13)
+#       define ADDR_SURF_BANK_WIDTH_1                   0
+#       define ADDR_SURF_BANK_WIDTH_2                   1
+#       define ADDR_SURF_BANK_WIDTH_4                   2
+#       define ADDR_SURF_BANK_WIDTH_8                   3
+#       define CB_BANK_HEIGHT(x)                        (((x) & 0x3) << 16)
+#       define ADDR_SURF_BANK_HEIGHT_1                  0
+#       define ADDR_SURF_BANK_HEIGHT_2                  1
+#       define ADDR_SURF_BANK_HEIGHT_4                  2
+#       define ADDR_SURF_BANK_HEIGHT_8                  3
 #define	CB_COLOR0_DIM					0x28c78
 /* only CB0-7 blocks have these regs */
 #define	CB_COLOR0_CMASK					0x28c7c
@@ -1137,7 +1164,11 @@
 #	define SQ_SEL_1					5
 #define SQ_TEX_RESOURCE_WORD5_0                         0x30014
 #define SQ_TEX_RESOURCE_WORD6_0                         0x30018
+#       define TEX_TILE_SPLIT(x)                        (((x) & 0x7) << 29)
 #define SQ_TEX_RESOURCE_WORD7_0                         0x3001c
+#       define TEX_BANK_WIDTH(x)                        (((x) & 0x3) << 8)
+#       define TEX_BANK_HEIGHT(x)                       (((x) & 0x3) << 10)
+#       define TEX_NUM_BANKS(x)                         (((x) & 0x3) << 16)
 
 #define SQ_VTX_CONSTANT_WORD0_0				0x30000
 #define SQ_VTX_CONSTANT_WORD1_0				0x30004
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 556b7bc..0e57998 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -24,6 +24,7 @@
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "drmP.h"
 #include "radeon.h"
 #include "radeon_asic.h"
@@ -261,8 +262,11 @@
 		WREG32(MC_SEQ_SUP_CNTL, 0x00000001);
 
 		/* wait for training to complete */
-		while (!(RREG32(MC_IO_PAD_CNTL_D0) & MEM_FALL_OUT_CMD))
-			udelay(10);
+		for (i = 0; i < rdev->usec_timeout; i++) {
+			if (RREG32(MC_IO_PAD_CNTL_D0) & MEM_FALL_OUT_CMD)
+				break;
+			udelay(1);
+		}
 
 		if (running)
 			WREG32(MC_SHARED_BLACKOUT_CNTL, blackout);
@@ -932,7 +936,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -977,8 +981,6 @@
 
 void cayman_pcie_gart_disable(struct radeon_device *rdev)
 {
-	int r;
-
 	/* Disable all tables */
 	WREG32(VM_CONTEXT0_CNTL, 0);
 	WREG32(VM_CONTEXT1_CNTL, 0);
@@ -994,14 +996,7 @@
 	WREG32(VM_L2_CNTL2, 0);
 	WREG32(VM_L2_CNTL3, L2_CACHE_BIGK_ASSOCIATIVITY |
 	       L2_CACHE_BIGK_FRAGMENT_SIZE(6));
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void cayman_pcie_gart_fini(struct radeon_device *rdev)
@@ -1361,6 +1356,10 @@
 		return r;
 	}
 
+	r = r600_vram_scratch_init(rdev);
+	if (r)
+		return r;
+
 	evergreen_mc_program(rdev);
 	r = cayman_pcie_gart_enable(rdev);
 	if (r)
@@ -1556,6 +1555,7 @@
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	cayman_pcie_gart_fini(rdev);
+	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_bo_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 8f8b8fa..bfc08f6 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -41,6 +41,7 @@
 
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include "r100_reg_safe.h"
 #include "rn50_reg_safe.h"
@@ -186,13 +187,18 @@
 {
 	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id];
 	u32 tmp = ((u32)crtc_base) | RADEON_CRTC_OFFSET__OFFSET_LOCK;
+	int i;
 
 	/* Lock the graphics update lock */
 	/* update the scanout addresses */
 	WREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset, tmp);
 
 	/* Wait for update_pending to go high. */
-	while (!(RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET));
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		if (RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET)
+			break;
+		udelay(1);
+	}
 	DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n");
 
 	/* Unlock the lock, so double-buffering can take place inside vblank */
@@ -536,6 +542,7 @@
 		default:
 			break;
 		}
+		radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
 	}
 	if (rdev->irq.installed)
 		r100_irq_set(rdev);
@@ -576,7 +583,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.ram.ptr) {
+	if (rdev->gart.ptr) {
 		WARN(1, "R100 PCI GART already initialized\n");
 		return 0;
 	}
@@ -635,10 +642,12 @@
 
 int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
+	u32 *gtt = rdev->gart.ptr;
+
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
+	gtt[i] = cpu_to_le32(lower_32_bits(addr));
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 33f2b68..c93bc64 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -74,7 +74,7 @@
 
 int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
-	void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+	void __iomem *ptr = rdev->gart.ptr;
 
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
@@ -93,7 +93,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj) {
+	if (rdev->gart.robj) {
 		WARN(1, "RV370 PCIE GART already initialized\n");
 		return 0;
 	}
@@ -116,7 +116,7 @@
 	uint32_t tmp;
 	int r;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -154,7 +154,6 @@
 void rv370_pcie_gart_disable(struct radeon_device *rdev)
 {
 	u32 tmp;
-	int r;
 
 	WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, 0);
 	WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, 0);
@@ -163,14 +162,7 @@
 	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
 	tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
 	WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp & ~RADEON_PCIE_TX_GART_EN);
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void rv370_pcie_gart_fini(struct radeon_device *rdev)
@@ -709,16 +701,21 @@
 			return r;
 		}
 
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_TXO_MACRO_TILE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_TXO_MICRO_TILE;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_TXO_MICRO_TILE_SQUARE;
+		if (p->keep_tiling_flags) {
+			ib[idx] = (idx_value & 31) | /* keep the 1st 5 bits */
+				  ((idx_value & ~31) + (u32)reloc->lobj.gpu_offset);
+		} else {
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_TXO_MACRO_TILE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_TXO_MICRO_TILE;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_TXO_MICRO_TILE_SQUARE;
 
-		tmp = idx_value + ((u32)reloc->lobj.gpu_offset);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
+			tmp = idx_value + ((u32)reloc->lobj.gpu_offset);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
+		}
 		track->textures[i].robj = reloc->robj;
 		track->tex_dirty = true;
 		break;
@@ -768,24 +765,26 @@
 		/* RB3D_COLORPITCH1 */
 		/* RB3D_COLORPITCH2 */
 		/* RB3D_COLORPITCH3 */
-		r = r100_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
-				  idx, reg);
-			r100_cs_dump_packet(p, pkt);
-			return r;
+		if (!p->keep_tiling_flags) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_COLOR_TILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE;
+
+			tmp = idx_value & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
 		}
-
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_COLOR_TILE_ENABLE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE;
-
-		tmp = idx_value & ~(0x7 << 16);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
 		i = (reg - 0x4E38) >> 2;
 		track->cb[i].pitch = idx_value & 0x3FFE;
 		switch (((idx_value >> 21) & 0xF)) {
@@ -851,25 +850,26 @@
 		break;
 	case 0x4F24:
 		/* ZB_DEPTHPITCH */
-		r = r100_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
-				  idx, reg);
-			r100_cs_dump_packet(p, pkt);
-			return r;
+		if (!p->keep_tiling_flags) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_DEPTHMICROTILE_TILED;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE;
+
+			tmp = idx_value & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
 		}
-
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_DEPTHMACROTILE_ENABLE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_DEPTHMICROTILE_TILED;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE;
-
-		tmp = idx_value & ~(0x7 << 16);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
-
 		track->zb.pitch = idx_value & 0x3FFC;
 		track->zb_dirty = true;
 		break;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 12470b0..9cdda0b 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -29,6 +29,7 @@
 #include <linux/seq_file.h>
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include "drmP.h"
 #include "radeon_drm.h"
 #include "radeon.h"
@@ -287,24 +288,6 @@
 		  pcie_lanes);
 }
 
-static int r600_pm_get_type_index(struct radeon_device *rdev,
-				  enum radeon_pm_state_type ps_type,
-				  int instance)
-{
-	int i;
-	int found_instance = -1;
-
-	for (i = 0; i < rdev->pm.num_power_states; i++) {
-		if (rdev->pm.power_state[i].type == ps_type) {
-			found_instance++;
-			if (found_instance == instance)
-				return i;
-		}
-	}
-	/* return default if no match */
-	return rdev->pm.default_power_state_index;
-}
-
 void rs780_pm_init_profile(struct radeon_device *rdev)
 {
 	if (rdev->pm.num_power_states == 2) {
@@ -420,6 +403,8 @@
 
 void r600_pm_init_profile(struct radeon_device *rdev)
 {
+	int idx;
+
 	if (rdev->family == CHIP_R600) {
 		/* XXX */
 		/* default */
@@ -501,81 +486,43 @@
 			rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2;
 			/* low sh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
-			}
+			if (rdev->flags & RADEON_IS_MOBILITY)
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+			else
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
 			/* mid sh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
-			}
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			/* high sh */
-			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
 			/* low mh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
-			}
+			if (rdev->flags & RADEON_IS_MOBILITY)
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+			else
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
 			/* mid mh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
-			}
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			/* high mh */
-			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
 		}
@@ -762,13 +709,14 @@
 	struct drm_device *dev = rdev->ddev;
 	struct drm_connector *connector;
 
-	if (ASIC_IS_DCE3(rdev)) {
-		u32 tmp = DC_HPDx_CONNECTION_TIMER(0x9c4) | DC_HPDx_RX_INT_TIMER(0xfa);
-		if (ASIC_IS_DCE32(rdev))
-			tmp |= DC_HPDx_EN;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 
-		list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-			struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		if (ASIC_IS_DCE3(rdev)) {
+			u32 tmp = DC_HPDx_CONNECTION_TIMER(0x9c4) | DC_HPDx_RX_INT_TIMER(0xfa);
+			if (ASIC_IS_DCE32(rdev))
+				tmp |= DC_HPDx_EN;
+
 			switch (radeon_connector->hpd.hpd) {
 			case RADEON_HPD_1:
 				WREG32(DC_HPD1_CONTROL, tmp);
@@ -798,10 +746,7 @@
 			default:
 				break;
 			}
-		}
-	} else {
-		list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-			struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		} else {
 			switch (radeon_connector->hpd.hpd) {
 			case RADEON_HPD_1:
 				WREG32(DC_HOT_PLUG_DETECT1_CONTROL, DC_HOT_PLUG_DETECTx_EN);
@@ -819,6 +764,7 @@
 				break;
 			}
 		}
+		radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
 	}
 	if (rdev->irq.installed)
 		r600_irq_set(rdev);
@@ -896,7 +842,7 @@
 	/* flush hdp cache so updates hit vram */
 	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
 	    !(rdev->flags & RADEON_IS_AGP)) {
-		void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+		void __iomem *ptr = (void *)rdev->gart.ptr;
 		u32 tmp;
 
 		/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
@@ -931,7 +877,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj) {
+	if (rdev->gart.robj) {
 		WARN(1, "R600 PCIE GART already initialized\n");
 		return 0;
 	}
@@ -948,7 +894,7 @@
 	u32 tmp;
 	int r, i;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -1003,7 +949,7 @@
 void r600_pcie_gart_disable(struct radeon_device *rdev)
 {
 	u32 tmp;
-	int i, r;
+	int i;
 
 	/* Disable all tables */
 	for (i = 0; i < 7; i++)
@@ -1030,14 +976,7 @@
 	WREG32(MC_VM_L1_TLB_MCB_WR_SYS_CNTL, tmp);
 	WREG32(MC_VM_L1_TLB_MCB_RD_HDP_CNTL, tmp);
 	WREG32(MC_VM_L1_TLB_MCB_WR_HDP_CNTL, tmp);
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void r600_pcie_gart_fini(struct radeon_device *rdev)
@@ -1137,7 +1076,7 @@
 		WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
 		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12);
 	}
-	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
 	tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
 	tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
 	WREG32(MC_VM_FB_LOCATION, tmp);
@@ -1276,6 +1215,53 @@
 	return 0;
 }
 
+int r600_vram_scratch_init(struct radeon_device *rdev)
+{
+	int r;
+
+	if (rdev->vram_scratch.robj == NULL) {
+		r = radeon_bo_create(rdev, RADEON_GPU_PAGE_SIZE,
+				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+				     &rdev->vram_scratch.robj);
+		if (r) {
+			return r;
+		}
+	}
+
+	r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
+	if (unlikely(r != 0))
+		return r;
+	r = radeon_bo_pin(rdev->vram_scratch.robj,
+			  RADEON_GEM_DOMAIN_VRAM, &rdev->vram_scratch.gpu_addr);
+	if (r) {
+		radeon_bo_unreserve(rdev->vram_scratch.robj);
+		return r;
+	}
+	r = radeon_bo_kmap(rdev->vram_scratch.robj,
+				(void **)&rdev->vram_scratch.ptr);
+	if (r)
+		radeon_bo_unpin(rdev->vram_scratch.robj);
+	radeon_bo_unreserve(rdev->vram_scratch.robj);
+
+	return r;
+}
+
+void r600_vram_scratch_fini(struct radeon_device *rdev)
+{
+	int r;
+
+	if (rdev->vram_scratch.robj == NULL) {
+		return;
+	}
+	r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
+	if (likely(r == 0)) {
+		radeon_bo_kunmap(rdev->vram_scratch.robj);
+		radeon_bo_unpin(rdev->vram_scratch.robj);
+		radeon_bo_unreserve(rdev->vram_scratch.robj);
+	}
+	radeon_bo_unref(&rdev->vram_scratch.robj);
+}
+
 /* We doesn't check that the GPU really needs a reset we simply do the
  * reset, it's up to the caller to determine if the GPU needs one. We
  * might add an helper function to check that.
@@ -2331,6 +2317,14 @@
 	if (rdev->wb.use_event) {
 		u64 addr = rdev->wb.gpu_addr + R600_WB_EVENT_OFFSET +
 			(u64)(rdev->fence_drv.scratch_reg - rdev->scratch.reg_base);
+		/* flush read cache over gart */
+		radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
+		radeon_ring_write(rdev, PACKET3_TC_ACTION_ENA |
+					PACKET3_VC_ACTION_ENA |
+					PACKET3_SH_ACTION_ENA);
+		radeon_ring_write(rdev, 0xFFFFFFFF);
+		radeon_ring_write(rdev, 0);
+		radeon_ring_write(rdev, 10); /* poll interval */
 		/* EVENT_WRITE_EOP - flush caches, send int */
 		radeon_ring_write(rdev, PACKET3(PACKET3_EVENT_WRITE_EOP, 4));
 		radeon_ring_write(rdev, EVENT_TYPE(CACHE_FLUSH_AND_INV_EVENT_TS) | EVENT_INDEX(5));
@@ -2339,6 +2333,14 @@
 		radeon_ring_write(rdev, fence->seq);
 		radeon_ring_write(rdev, 0);
 	} else {
+		/* flush read cache over gart */
+		radeon_ring_write(rdev, PACKET3(PACKET3_SURFACE_SYNC, 3));
+		radeon_ring_write(rdev, PACKET3_TC_ACTION_ENA |
+					PACKET3_VC_ACTION_ENA |
+					PACKET3_SH_ACTION_ENA);
+		radeon_ring_write(rdev, 0xFFFFFFFF);
+		radeon_ring_write(rdev, 0);
+		radeon_ring_write(rdev, 10); /* poll interval */
 		radeon_ring_write(rdev, PACKET3(PACKET3_EVENT_WRITE, 0));
 		radeon_ring_write(rdev, EVENT_TYPE(CACHE_FLUSH_AND_INV_EVENT) | EVENT_INDEX(0));
 		/* wait for 3D idle clean */
@@ -2420,6 +2422,10 @@
 		}
 	}
 
+	r = r600_vram_scratch_init(rdev);
+	if (r)
+		return r;
+
 	r600_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		r600_agp_enable(rdev);
@@ -2640,6 +2646,7 @@
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	r600_pcie_gart_fini(rdev);
+	r600_vram_scratch_fini(rdev);
 	radeon_agp_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index c4cf130..e09d281 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -201,7 +201,7 @@
 static void
 set_tex_resource(struct radeon_device *rdev,
 		 int format, int w, int h, int pitch,
-		 u64 gpu_addr)
+		 u64 gpu_addr, u32 size)
 {
 	uint32_t sq_tex_resource_word0, sq_tex_resource_word1, sq_tex_resource_word4;
 
@@ -222,6 +222,9 @@
 		S_038010_DST_SEL_Z(SQ_SEL_Z) |
 		S_038010_DST_SEL_W(SQ_SEL_W);
 
+	cp_set_surface_sync(rdev,
+			    PACKET3_TC_ACTION_ENA, size, gpu_addr);
+
 	radeon_ring_write(rdev, PACKET3(PACKET3_SET_RESOURCE, 7));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_write(rdev, sq_tex_resource_word0);
@@ -500,9 +503,9 @@
 	rdev->r600_blit.primitives.set_default_state = set_default_state;
 
 	rdev->r600_blit.ring_size_common = 40; /* shaders + def state */
-	rdev->r600_blit.ring_size_common += 10; /* fence emit for VB IB */
+	rdev->r600_blit.ring_size_common += 16; /* fence emit for VB IB */
 	rdev->r600_blit.ring_size_common += 5; /* done copy */
-	rdev->r600_blit.ring_size_common += 10; /* fence emit for done copy */
+	rdev->r600_blit.ring_size_common += 16; /* fence emit for done copy */
 
 	rdev->r600_blit.ring_size_per_loop = 76;
 	/* set_render_target emits 2 extra dwords on rv6xx */
@@ -760,10 +763,7 @@
 		vb[11] = i2f(h);
 
 		rdev->r600_blit.primitives.set_tex_resource(rdev, FMT_8_8_8_8,
-							    w, h, w, src_gpu_addr);
-		rdev->r600_blit.primitives.cp_set_surface_sync(rdev,
-							       PACKET3_TC_ACTION_ENA,
-							       size_in_bytes, src_gpu_addr);
+							    w, h, w, src_gpu_addr, size_in_bytes);
 		rdev->r600_blit.primitives.set_render_target(rdev, COLOR_8_8_8_8,
 							     w, h, dst_gpu_addr);
 		rdev->r600_blit.primitives.set_scissors(rdev, 0, 0, w, h);
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 45fd592..c9db493 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -26,6 +26,8 @@
  *     Alex Deucher <alexander.deucher@amd.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm.h"
 #include "radeon_drm.h"
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0a2e023..cb1acff 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -941,7 +941,8 @@
 		track->db_depth_control = radeon_get_ib_value(p, idx);
 		break;
 	case R_028010_DB_DEPTH_INFO:
-		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+		if (!p->keep_tiling_flags &&
+		    r600_cs_packet_next_is_pkt3_nop(p)) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				dev_warn(p->dev, "bad SET_CONTEXT_REG "
@@ -992,7 +993,8 @@
 	case R_0280B4_CB_COLOR5_INFO:
 	case R_0280B8_CB_COLOR6_INFO:
 	case R_0280BC_CB_COLOR7_INFO:
-		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+		if (!p->keep_tiling_flags &&
+		     r600_cs_packet_next_is_pkt3_nop(p)) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
@@ -1291,10 +1293,12 @@
 	mip_offset <<= 8;
 
 	word0 = radeon_get_ib_value(p, idx + 0);
-	if (tiling_flags & RADEON_TILING_MACRO)
-		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
-	else if (tiling_flags & RADEON_TILING_MICRO)
-		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+	if (!p->keep_tiling_flags) {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+		else if (tiling_flags & RADEON_TILING_MICRO)
+			word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+	}
 	word1 = radeon_get_ib_value(p, idx + 1);
 	w0 = G_038000_TEX_WIDTH(word0) + 1;
 	h0 = G_038004_TEX_HEIGHT(word1) + 1;
@@ -1621,10 +1625,12 @@
 					return -EINVAL;
 				}
 				base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
-				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
-				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+				if (!p->keep_tiling_flags) {
+					if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+						ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+					else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+						ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+				}
 				texture = reloc->robj;
 				/* tex mip base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index e3170c7..8227e76 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -93,6 +93,7 @@
 extern int radeon_disp_priority;
 extern int radeon_hw_i2c;
 extern int radeon_pcie_gen2;
+extern int radeon_msi;
 
 /*
  * Copy from radeon_drv.h so we don't have to include both and have conflicting
@@ -306,30 +307,17 @@
  */
 struct radeon_mc;
 
-struct radeon_gart_table_ram {
-	volatile uint32_t		*ptr;
-};
-
-struct radeon_gart_table_vram {
-	struct radeon_bo		*robj;
-	volatile uint32_t		*ptr;
-};
-
-union radeon_gart_table {
-	struct radeon_gart_table_ram	ram;
-	struct radeon_gart_table_vram	vram;
-};
-
 #define RADEON_GPU_PAGE_SIZE 4096
 #define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1)
 #define RADEON_GPU_PAGE_SHIFT 12
 
 struct radeon_gart {
 	dma_addr_t			table_addr;
+	struct radeon_bo		*robj;
+	void				*ptr;
 	unsigned			num_gpu_pages;
 	unsigned			num_cpu_pages;
 	unsigned			table_size;
-	union radeon_gart_table		table;
 	struct page			**pages;
 	dma_addr_t			*pages_addr;
 	bool				*ttm_alloced;
@@ -340,6 +328,8 @@
 void radeon_gart_table_ram_free(struct radeon_device *rdev);
 int radeon_gart_table_vram_alloc(struct radeon_device *rdev);
 void radeon_gart_table_vram_free(struct radeon_device *rdev);
+int radeon_gart_table_vram_pin(struct radeon_device *rdev);
+void radeon_gart_table_vram_unpin(struct radeon_device *rdev);
 int radeon_gart_init(struct radeon_device *rdev);
 void radeon_gart_fini(struct radeon_device *rdev);
 void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset,
@@ -347,6 +337,7 @@
 int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
 		     int pages, struct page **pagelist,
 		     dma_addr_t *dma_addr);
+void radeon_gart_restore(struct radeon_device *rdev);
 
 
 /*
@@ -437,25 +428,26 @@
 	struct evergreen_irq_stat_regs evergreen;
 };
 
+#define RADEON_MAX_HPD_PINS 6
+#define RADEON_MAX_CRTCS 6
+#define RADEON_MAX_HDMI_BLOCKS 2
+
 struct radeon_irq {
 	bool		installed;
 	bool		sw_int;
-	/* FIXME: use a define max crtc rather than hardcode it */
-	bool		crtc_vblank_int[6];
-	bool		pflip[6];
+	bool		crtc_vblank_int[RADEON_MAX_CRTCS];
+	bool		pflip[RADEON_MAX_CRTCS];
 	wait_queue_head_t	vblank_queue;
-	/* FIXME: use defines for max hpd/dacs */
-	bool            hpd[6];
+	bool            hpd[RADEON_MAX_HPD_PINS];
 	bool            gui_idle;
 	bool            gui_idle_acked;
 	wait_queue_head_t	idle_queue;
-	/* FIXME: use defines for max HDMI blocks */
-	bool		hdmi[2];
+	bool		hdmi[RADEON_MAX_HDMI_BLOCKS];
 	spinlock_t sw_lock;
 	int sw_refcount;
 	union radeon_irq_stat_regs stat_regs;
-	spinlock_t pflip_lock[6];
-	int pflip_refcount[6];
+	spinlock_t pflip_lock[RADEON_MAX_CRTCS];
+	int pflip_refcount[RADEON_MAX_CRTCS];
 };
 
 int radeon_irq_kms_init(struct radeon_device *rdev);
@@ -533,7 +525,7 @@
 	void (*set_vtx_resource)(struct radeon_device *rdev, u64 gpu_addr);
 	void (*set_tex_resource)(struct radeon_device *rdev,
 				 int format, int w, int h, int pitch,
-				 u64 gpu_addr);
+				 u64 gpu_addr, u32 size);
 	void (*set_scissors)(struct radeon_device *rdev, int x1, int y1,
 			     int x2, int y2);
 	void (*draw_auto)(struct radeon_device *rdev);
@@ -619,7 +611,8 @@
 	struct radeon_ib	*ib;
 	void			*track;
 	unsigned		family;
-	int parser_error;
+	int			parser_error;
+	bool			keep_tiling_flags;
 };
 
 extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
@@ -792,8 +785,7 @@
 
 struct radeon_power_state {
 	enum radeon_pm_state_type type;
-	/* XXX: use a define for num clock modes */
-	struct radeon_pm_clock_info clock_info[8];
+	struct radeon_pm_clock_info *clock_info;
 	/* number of valid clock modes in this power state */
 	int num_clock_modes;
 	struct radeon_pm_clock_info *default_clock_mode;
@@ -863,6 +855,9 @@
 	struct device	        *int_hwmon_dev;
 };
 
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+			     enum radeon_pm_state_type ps_type,
+			     int instance);
 
 /*
  * Benchmarking
@@ -1143,12 +1138,55 @@
 int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *filp);
 
-/* VRAM scratch page for HDP bug */
-struct r700_vram_scratch {
+/* VRAM scratch page for HDP bug, default vram page */
+struct r600_vram_scratch {
 	struct radeon_bo		*robj;
 	volatile uint32_t		*ptr;
+	u64				gpu_addr;
 };
 
+
+/*
+ * Mutex which allows recursive locking from the same process.
+ */
+struct radeon_mutex {
+	struct mutex		mutex;
+	struct task_struct	*owner;
+	int			level;
+};
+
+static inline void radeon_mutex_init(struct radeon_mutex *mutex)
+{
+	mutex_init(&mutex->mutex);
+	mutex->owner = NULL;
+	mutex->level = 0;
+}
+
+static inline void radeon_mutex_lock(struct radeon_mutex *mutex)
+{
+	if (mutex_trylock(&mutex->mutex)) {
+		/* The mutex was unlocked before, so it's ours now */
+		mutex->owner = current;
+	} else if (mutex->owner != current) {
+		/* Another process locked the mutex, take it */
+		mutex_lock(&mutex->mutex);
+		mutex->owner = current;
+	}
+	/* Otherwise the mutex was already locked by this process */
+
+	mutex->level++;
+}
+
+static inline void radeon_mutex_unlock(struct radeon_mutex *mutex)
+{
+	if (--mutex->level > 0)
+		return;
+
+	mutex->owner = NULL;
+	mutex_unlock(&mutex->mutex);
+}
+
+
 /*
  * Core structure, functions and helpers.
  */
@@ -1204,7 +1242,7 @@
 	struct radeon_gem		gem;
 	struct radeon_pm		pm;
 	uint32_t			bios_scratch[RADEON_BIOS_NUM_SCRATCH];
-	struct mutex			cs_mutex;
+	struct radeon_mutex		cs_mutex;
 	struct radeon_wb		wb;
 	struct radeon_dummy_page	dummy_page;
 	bool				gpu_lockup;
@@ -1218,7 +1256,7 @@
 	const struct firmware *rlc_fw;	/* r6/700 RLC firmware */
 	const struct firmware *mc_fw;	/* NI MC firmware */
 	struct r600_blit r600_blit;
-	struct r700_vram_scratch vram_scratch;
+	struct r600_vram_scratch vram_scratch;
 	int msi_enabled; /* msi enabled */
 	struct r600_ih ih; /* r6/700 interrupt ring */
 	struct work_struct hotplug_work;
@@ -1442,8 +1480,6 @@
 /* AGP */
 extern int radeon_gpu_reset(struct radeon_device *rdev);
 extern void radeon_agp_disable(struct radeon_device *rdev);
-extern int radeon_gart_table_vram_pin(struct radeon_device *rdev);
-extern void radeon_gart_restore(struct radeon_device *rdev);
 extern int radeon_modeset_init(struct radeon_device *rdev);
 extern void radeon_modeset_fini(struct radeon_device *rdev);
 extern bool radeon_card_posted(struct radeon_device *rdev);
@@ -1467,6 +1503,12 @@
 extern void radeon_ttm_set_active_vram_size(struct radeon_device *rdev, u64 size);
 
 /*
+ * R600 vram scratch functions
+ */
+int r600_vram_scratch_init(struct radeon_device *rdev);
+void r600_vram_scratch_fini(struct radeon_device *rdev);
+
+/*
  * r600 functions used by radeon_encoder.c
  */
 extern void r600_hdmi_enable(struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c
index 3f6636b..3516a60 100644
--- a/drivers/gpu/drm/radeon/radeon_acpi.c
+++ b/drivers/gpu/drm/radeon/radeon_acpi.c
@@ -35,7 +35,8 @@
 
 	/* Fail only if calling the method fails and ATIF is supported */
 	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		printk(KERN_DEBUG "failed to evaluate ATIF got %s\n", acpi_format_exception(status));
+		DRM_DEBUG_DRIVER("failed to evaluate ATIF got %s\n",
+				 acpi_format_exception(status));
 		kfree(buffer.pointer);
 		return 1;
 	}
@@ -50,13 +51,13 @@
 	acpi_handle handle;
 	int ret;
 
-	/* No need to proceed if we're sure that ATIF is not supported */
-	if (!ASIC_IS_AVIVO(rdev) || !rdev->bios)
-		return 0;
-
 	/* Get the device handle */
 	handle = DEVICE_ACPI_HANDLE(&rdev->pdev->dev);
 
+	/* No need to proceed if we're sure that ATIF is not supported */
+	if (!ASIC_IS_AVIVO(rdev) || !rdev->bios || !handle)
+		return 0;
+
 	/* Call the ATIF method */
 	ret = radeon_atif_call(handle);
 	if (ret)
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index e294456..a2e1eae 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -834,7 +834,7 @@
 	.pm_misc = &evergreen_pm_misc,
 	.pm_prepare = &evergreen_pm_prepare,
 	.pm_finish = &evergreen_pm_finish,
-	.pm_init_profile = &rs780_pm_init_profile,
+	.pm_init_profile = &sumo_pm_init_profile,
 	.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
 	.pre_page_flip = &evergreen_pre_page_flip,
 	.page_flip = &evergreen_page_flip,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 85f14f0..5991484 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -413,6 +413,7 @@
 extern void evergreen_pm_misc(struct radeon_device *rdev);
 extern void evergreen_pm_prepare(struct radeon_device *rdev);
 extern void evergreen_pm_finish(struct radeon_device *rdev);
+extern void sumo_pm_init_profile(struct radeon_device *rdev);
 extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc);
 extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base);
 extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 08d0b94..d24baf3 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -62,6 +62,87 @@
 	struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1;
 };
 
+static void radeon_lookup_i2c_gpio_quirks(struct radeon_device *rdev,
+					  ATOM_GPIO_I2C_ASSIGMENT *gpio,
+					  u8 index)
+{
+	/* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */
+	if ((rdev->family == CHIP_R420) ||
+	    (rdev->family == CHIP_R423) ||
+	    (rdev->family == CHIP_RV410)) {
+		if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) ||
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) ||
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) {
+			gpio->ucClkMaskShift = 0x19;
+			gpio->ucDataMaskShift = 0x18;
+		}
+	}
+
+	/* some evergreen boards have bad data for this entry */
+	if (ASIC_IS_DCE4(rdev)) {
+		if ((index == 7) &&
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
+		    (gpio->sucI2cId.ucAccess == 0)) {
+			gpio->sucI2cId.ucAccess = 0x97;
+			gpio->ucDataMaskShift = 8;
+			gpio->ucDataEnShift = 8;
+			gpio->ucDataY_Shift = 8;
+			gpio->ucDataA_Shift = 8;
+		}
+	}
+
+	/* some DCE3 boards have bad data for this entry */
+	if (ASIC_IS_DCE3(rdev)) {
+		if ((index == 4) &&
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
+		    (gpio->sucI2cId.ucAccess == 0x94))
+			gpio->sucI2cId.ucAccess = 0x14;
+	}
+}
+
+static struct radeon_i2c_bus_rec radeon_get_bus_rec_for_i2c_gpio(ATOM_GPIO_I2C_ASSIGMENT *gpio)
+{
+	struct radeon_i2c_bus_rec i2c;
+
+	memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
+
+	i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
+	i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
+	i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
+	i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
+	i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
+	i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
+	i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
+	i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
+	i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
+	i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
+	i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
+	i2c.en_data_mask = (1 << gpio->ucDataEnShift);
+	i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
+	i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
+	i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
+	i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
+
+	if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
+		i2c.hw_capable = true;
+	else
+		i2c.hw_capable = false;
+
+	if (gpio->sucI2cId.ucAccess == 0xa0)
+		i2c.mm_i2c = true;
+	else
+		i2c.mm_i2c = false;
+
+	i2c.i2c_id = gpio->sucI2cId.ucAccess;
+
+	if (i2c.mask_clk_reg)
+		i2c.valid = true;
+	else
+		i2c.valid = false;
+
+	return i2c;
+}
+
 static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev,
 							       uint8_t id)
 {
@@ -85,59 +166,10 @@
 		for (i = 0; i < num_indices; i++) {
 			gpio = &i2c_info->asGPIO_Info[i];
 
-			/* some evergreen boards have bad data for this entry */
-			if (ASIC_IS_DCE4(rdev)) {
-				if ((i == 7) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
-				    (gpio->sucI2cId.ucAccess == 0)) {
-					gpio->sucI2cId.ucAccess = 0x97;
-					gpio->ucDataMaskShift = 8;
-					gpio->ucDataEnShift = 8;
-					gpio->ucDataY_Shift = 8;
-					gpio->ucDataA_Shift = 8;
-				}
-			}
-
-			/* some DCE3 boards have bad data for this entry */
-			if (ASIC_IS_DCE3(rdev)) {
-				if ((i == 4) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
-				    (gpio->sucI2cId.ucAccess == 0x94))
-					gpio->sucI2cId.ucAccess = 0x14;
-			}
+			radeon_lookup_i2c_gpio_quirks(rdev, gpio, i);
 
 			if (gpio->sucI2cId.ucAccess == id) {
-				i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
-				i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
-				i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
-				i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
-				i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
-				i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
-				i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
-				i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
-				i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
-				i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
-				i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
-				i2c.en_data_mask = (1 << gpio->ucDataEnShift);
-				i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
-				i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
-				i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
-				i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
-
-				if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
-					i2c.hw_capable = true;
-				else
-					i2c.hw_capable = false;
-
-				if (gpio->sucI2cId.ucAccess == 0xa0)
-					i2c.mm_i2c = true;
-				else
-					i2c.mm_i2c = false;
-
-				i2c.i2c_id = gpio->sucI2cId.ucAccess;
-
-				if (i2c.mask_clk_reg)
-					i2c.valid = true;
+				i2c = radeon_get_bus_rec_for_i2c_gpio(gpio);
 				break;
 			}
 		}
@@ -157,8 +189,6 @@
 	int i, num_indices;
 	char stmp[32];
 
-	memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
-
 	if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) {
 		i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
 
@@ -167,60 +197,12 @@
 
 		for (i = 0; i < num_indices; i++) {
 			gpio = &i2c_info->asGPIO_Info[i];
-			i2c.valid = false;
 
-			/* some evergreen boards have bad data for this entry */
-			if (ASIC_IS_DCE4(rdev)) {
-				if ((i == 7) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
-				    (gpio->sucI2cId.ucAccess == 0)) {
-					gpio->sucI2cId.ucAccess = 0x97;
-					gpio->ucDataMaskShift = 8;
-					gpio->ucDataEnShift = 8;
-					gpio->ucDataY_Shift = 8;
-					gpio->ucDataA_Shift = 8;
-				}
-			}
+			radeon_lookup_i2c_gpio_quirks(rdev, gpio, i);
 
-			/* some DCE3 boards have bad data for this entry */
-			if (ASIC_IS_DCE3(rdev)) {
-				if ((i == 4) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
-				    (gpio->sucI2cId.ucAccess == 0x94))
-					gpio->sucI2cId.ucAccess = 0x14;
-			}
+			i2c = radeon_get_bus_rec_for_i2c_gpio(gpio);
 
-			i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
-			i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
-			i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
-			i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
-			i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
-			i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
-			i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
-			i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
-			i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
-			i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
-			i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
-			i2c.en_data_mask = (1 << gpio->ucDataEnShift);
-			i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
-			i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
-			i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
-			i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
-
-			if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
-				i2c.hw_capable = true;
-			else
-				i2c.hw_capable = false;
-
-			if (gpio->sucI2cId.ucAccess == 0xa0)
-				i2c.mm_i2c = true;
-			else
-				i2c.mm_i2c = false;
-
-			i2c.i2c_id = gpio->sucI2cId.ucAccess;
-
-			if (i2c.mask_clk_reg) {
-				i2c.valid = true;
+			if (i2c.valid) {
 				sprintf(stmp, "0x%x", i2c.i2c_id);
 				rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp);
 			}
@@ -1996,10 +1978,14 @@
 		return state_index;
 	/* last mode is usually default, array is low to high */
 	for (i = 0; i < num_modes; i++) {
+		rdev->pm.power_state[state_index].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		if (!rdev->pm.power_state[state_index].clock_info)
+			return state_index;
+		rdev->pm.power_state[state_index].num_clock_modes = 1;
 		rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
 		switch (frev) {
 		case 1:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2035,7 +2021,6 @@
 			state_index++;
 			break;
 		case 2:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2072,7 +2057,6 @@
 			state_index++;
 			break;
 		case 3:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2257,7 +2241,7 @@
 		rdev->pm.default_power_state_index = state_index;
 		rdev->pm.power_state[state_index].default_clock_mode =
 			&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
-		if (ASIC_IS_DCE5(rdev)) {
+		if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
 			/* NI chips post without MC ucode, so default clocks are strobe mode only */
 			rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
 			rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
@@ -2377,17 +2361,31 @@
 			 le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) +
 			 (power_state->v1.ucNonClockStateIndex *
 			  power_info->pplib.ucNonClockSize));
-		for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
-			clock_info = (union pplib_clock_info *)
-				(mode_info->atom_context->bios + data_offset +
-				 le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
-				 (power_state->v1.ucClockStateIndices[j] *
-				  power_info->pplib.ucClockInfoSize));
-			valid = radeon_atombios_parse_pplib_clock_info(rdev,
-								       state_index, mode_index,
-								       clock_info);
-			if (valid)
-				mode_index++;
+		rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+							     ((power_info->pplib.ucStateEntrySize - 1) ?
+							      (power_info->pplib.ucStateEntrySize - 1) : 1),
+							     GFP_KERNEL);
+		if (!rdev->pm.power_state[i].clock_info)
+			return state_index;
+		if (power_info->pplib.ucStateEntrySize - 1) {
+			for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
+				clock_info = (union pplib_clock_info *)
+					(mode_info->atom_context->bios + data_offset +
+					 le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
+					 (power_state->v1.ucClockStateIndices[j] *
+					  power_info->pplib.ucClockInfoSize));
+				valid = radeon_atombios_parse_pplib_clock_info(rdev,
+									       state_index, mode_index,
+									       clock_info);
+				if (valid)
+					mode_index++;
+			}
+		} else {
+			rdev->pm.power_state[state_index].clock_info[0].mclk =
+				rdev->clock.default_mclk;
+			rdev->pm.power_state[state_index].clock_info[0].sclk =
+				rdev->clock.default_sclk;
+			mode_index++;
 		}
 		rdev->pm.power_state[state_index].num_clock_modes = mode_index;
 		if (mode_index) {
@@ -2456,18 +2454,32 @@
 		non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */
 		non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *)
 			&non_clock_info_array->nonClockInfo[non_clock_array_index];
-		for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
-			clock_array_index = power_state->v2.clockInfoIndex[j];
-			/* XXX this might be an inagua bug... */
-			if (clock_array_index >= clock_info_array->ucNumEntries)
-				continue;
-			clock_info = (union pplib_clock_info *)
-				&clock_info_array->clockInfo[clock_array_index];
-			valid = radeon_atombios_parse_pplib_clock_info(rdev,
-								       state_index, mode_index,
-								       clock_info);
-			if (valid)
-				mode_index++;
+		rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+							     (power_state->v2.ucNumDPMLevels ?
+							      power_state->v2.ucNumDPMLevels : 1),
+							     GFP_KERNEL);
+		if (!rdev->pm.power_state[i].clock_info)
+			return state_index;
+		if (power_state->v2.ucNumDPMLevels) {
+			for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
+				clock_array_index = power_state->v2.clockInfoIndex[j];
+				/* XXX this might be an inagua bug... */
+				if (clock_array_index >= clock_info_array->ucNumEntries)
+					continue;
+				clock_info = (union pplib_clock_info *)
+					&clock_info_array->clockInfo[clock_array_index];
+				valid = radeon_atombios_parse_pplib_clock_info(rdev,
+									       state_index, mode_index,
+									       clock_info);
+				if (valid)
+					mode_index++;
+			}
+		} else {
+			rdev->pm.power_state[state_index].clock_info[0].mclk =
+				rdev->clock.default_mclk;
+			rdev->pm.power_state[state_index].clock_info[0].sclk =
+				rdev->clock.default_sclk;
+			mode_index++;
 		}
 		rdev->pm.power_state[state_index].num_clock_modes = mode_index;
 		if (mode_index) {
@@ -2524,19 +2536,23 @@
 	} else {
 		rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
 		if (rdev->pm.power_state) {
-			/* add the default mode */
-			rdev->pm.power_state[state_index].type =
-				POWER_STATE_TYPE_DEFAULT;
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
-			rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
-			rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
-			rdev->pm.power_state[state_index].default_clock_mode =
-				&rdev->pm.power_state[state_index].clock_info[0];
-			rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
-			rdev->pm.power_state[state_index].pcie_lanes = 16;
-			rdev->pm.default_power_state_index = state_index;
-			rdev->pm.power_state[state_index].flags = 0;
-			state_index++;
+			rdev->pm.power_state[0].clock_info =
+				kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+			if (rdev->pm.power_state[0].clock_info) {
+				/* add the default mode */
+				rdev->pm.power_state[state_index].type =
+					POWER_STATE_TYPE_DEFAULT;
+				rdev->pm.power_state[state_index].num_clock_modes = 1;
+				rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+				rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+				rdev->pm.power_state[state_index].default_clock_mode =
+					&rdev->pm.power_state[state_index].clock_info[0];
+				rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+				rdev->pm.power_state[state_index].pcie_lanes = 16;
+				rdev->pm.default_power_state_index = state_index;
+				rdev->pm.power_state[state_index].flags = 0;
+				state_index++;
+			}
 		}
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 5cafc90..17e1a9b 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -98,7 +98,7 @@
 	struct radeon_bo *sobj = NULL;
 	uint64_t saddr, daddr;
 	int r, n;
-	unsigned int time;
+	int time;
 
 	n = RADEON_BENCHMARK_ITERATIONS;
 	r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 8bf83c4..81fc100 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2563,14 +2563,17 @@
 
 	/* allocate 2 power states */
 	rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL);
-	if (!rdev->pm.power_state) {
-		rdev->pm.default_power_state_index = state_index;
-		rdev->pm.num_power_states = 0;
-
-		rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
-		rdev->pm.current_clock_mode_index = 0;
-		return;
-	}
+	if (rdev->pm.power_state) {
+		/* allocate 1 clock mode per state */
+		rdev->pm.power_state[0].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		rdev->pm.power_state[1].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		if (!rdev->pm.power_state[0].clock_info ||
+		    !rdev->pm.power_state[1].clock_info)
+			goto pm_failed;
+	} else
+		goto pm_failed;
 
 	/* check for a thermal chip */
 	offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE);
@@ -2735,6 +2738,14 @@
 
 	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
 	rdev->pm.current_clock_mode_index = 0;
+	return;
+
+pm_failed:
+	rdev->pm.default_power_state_index = state_index;
+	rdev->pm.num_power_states = 0;
+
+	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+	rdev->pm.current_clock_mode_index = 0;
 }
 
 void radeon_external_tmds_setup(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index dec6cbe..e7cb3ab 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -44,8 +44,6 @@
 radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder,
 			     struct drm_connector *drm_connector);
 
-bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
-
 void radeon_connector_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
@@ -432,55 +430,6 @@
 	return 0;
 }
 
-/*
- * Some integrated ATI Radeon chipset implementations (e. g.
- * Asus M2A-VM HDMI) may indicate the availability of a DDC,
- * even when there's no monitor connected. For these connectors
- * following DDC probe extension will be applied: check also for the
- * availability of EDID with at least a correct EDID header. Only then,
- * DDC is assumed to be available. This prevents drm_get_edid() and
- * drm_edid_block_valid() from periodically dumping data and kernel
- * errors into the logs and onto the terminal.
- */
-static bool radeon_connector_needs_extended_probe(struct radeon_device *dev,
-				     uint32_t supported_device,
-				     int connector_type)
-{
-	/* Asus M2A-VM HDMI board sends data to i2c bus even,
-	 * if HDMI add-on card is not plugged in or HDMI is disabled in
-	 * BIOS. Valid DDC can only be assumed, if also a valid EDID header
-	 * can be retrieved via i2c bus during DDC probe */
-	if ((dev->pdev->device == 0x791e) &&
-	    (dev->pdev->subsystem_vendor == 0x1043) &&
-	    (dev->pdev->subsystem_device == 0x826d)) {
-		if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
-		    (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
-			return true;
-	}
-	/* ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
-	 * for a DVI connector that is not implemented */
-	if ((dev->pdev->device == 0x796e) &&
-	    (dev->pdev->subsystem_vendor == 0x1019) &&
-	    (dev->pdev->subsystem_device == 0x2615)) {
-		if ((connector_type == DRM_MODE_CONNECTOR_DVID) &&
-		    (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
-			return true;
-	}
-	/* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100
-	 * (RS690M) sends data to i2c bus for a HDMI connector that
-	 * is not implemented */
-	if ((dev->pdev->device == 0x791f) &&
-	    (dev->pdev->subsystem_vendor == 0x1179) &&
-	    (dev->pdev->subsystem_device == 0xff68)) {
-		if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
-		    (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
-			return true;
-	}
-
-	/* Default: no EDID header probe required for DDC probing */
-	return false;
-}
-
 static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder,
 					  struct drm_connector *connector)
 {
@@ -721,8 +670,7 @@
 		ret = connector_status_disconnected;
 
 	if (radeon_connector->ddc_bus)
-		dret = radeon_ddc_probe(radeon_connector,
-					radeon_connector->requires_extended_probe);
+		dret = radeon_ddc_probe(radeon_connector);
 	if (dret) {
 		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
@@ -764,7 +712,7 @@
 		if (radeon_connector->dac_load_detect && encoder) {
 			encoder_funcs = encoder->helper_private;
 			ret = encoder_funcs->detect(encoder, connector);
-			if (ret == connector_status_connected)
+			if (ret != connector_status_disconnected)
 				radeon_connector->detected_by_load = true;
 		}
 	}
@@ -904,8 +852,7 @@
 	bool dret = false;
 
 	if (radeon_connector->ddc_bus)
-		dret = radeon_ddc_probe(radeon_connector,
-					radeon_connector->requires_extended_probe);
+		dret = radeon_ddc_probe(radeon_connector);
 	if (dret) {
 		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
@@ -1005,8 +952,9 @@
 					ret = encoder_funcs->detect(encoder, connector);
 					if (ret == connector_status_connected) {
 						radeon_connector->use_digital = false;
-						radeon_connector->detected_by_load = true;
 					}
+					if (ret != connector_status_disconnected)
+						radeon_connector->detected_by_load = true;
 				}
 				break;
 			}
@@ -1203,7 +1151,8 @@
 		}
 	} else {
 		/* need to setup ddc on the bridge */
-		if (radeon_connector_encoder_is_dp_bridge(connector)) {
+		if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+			ENCODER_OBJECT_ID_NONE) {
 			if (encoder)
 				radeon_atom_ext_encoder_setup_ddc(encoder);
 		}
@@ -1213,13 +1162,12 @@
 	return ret;
 }
 
-bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector)
+u16 radeon_connector_encoder_get_dp_bridge_encoder_id(struct drm_connector *connector)
 {
 	struct drm_mode_object *obj;
 	struct drm_encoder *encoder;
 	struct radeon_encoder *radeon_encoder;
 	int i;
-	bool found = false;
 
 	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
 		if (connector->encoder_ids[i] == 0)
@@ -1235,14 +1183,13 @@
 		switch (radeon_encoder->encoder_id) {
 		case ENCODER_OBJECT_ID_TRAVIS:
 		case ENCODER_OBJECT_ID_NUTMEG:
-			found = true;
-			break;
+			return radeon_encoder->encoder_id;
 		default:
 			break;
 		}
 	}
 
-	return found;
+	return ENCODER_OBJECT_ID_NONE;
 }
 
 bool radeon_connector_encoder_is_hbr2(struct drm_connector *connector)
@@ -1319,7 +1266,8 @@
 		if (!radeon_dig_connector->edp_on)
 			atombios_set_edp_panel_power(connector,
 						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
-	} else if (radeon_connector_encoder_is_dp_bridge(connector)) {
+	} else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+		   ENCODER_OBJECT_ID_NONE) {
 		/* DP bridges are always DP */
 		radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
 		/* get the DPCD from the bridge */
@@ -1328,8 +1276,7 @@
 		if (encoder) {
 			/* setup ddc on the bridge */
 			radeon_atom_ext_encoder_setup_ddc(encoder);
-			if (radeon_ddc_probe(radeon_connector,
-					     radeon_connector->requires_extended_probe)) /* try DDC */
+			if (radeon_ddc_probe(radeon_connector)) /* try DDC */
 				ret = connector_status_connected;
 			else if (radeon_connector->dac_load_detect) { /* try load detection */
 				struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
@@ -1347,8 +1294,7 @@
 				if (radeon_dp_getdpcd(radeon_connector))
 					ret = connector_status_connected;
 			} else {
-				if (radeon_ddc_probe(radeon_connector,
-						     radeon_connector->requires_extended_probe))
+				if (radeon_ddc_probe(radeon_connector))
 					ret = connector_status_connected;
 			}
 		}
@@ -1493,9 +1439,7 @@
 	radeon_connector->shared_ddc = shared_ddc;
 	radeon_connector->connector_object_id = connector_object_id;
 	radeon_connector->hpd = *hpd;
-	radeon_connector->requires_extended_probe =
-		radeon_connector_needs_extended_probe(rdev, supported_device,
-							connector_type);
+
 	radeon_connector->router = *router;
 	if (router->ddc_valid || router->cd_valid) {
 		radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
@@ -1842,9 +1786,7 @@
 	radeon_connector->devices = supported_device;
 	radeon_connector->connector_object_id = connector_object_id;
 	radeon_connector->hpd = *hpd;
-	radeon_connector->requires_extended_probe =
-		radeon_connector_needs_extended_probe(rdev, supported_device,
-							connector_type);
+
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 045ec59..72ae826 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -29,6 +29,8 @@
  *    Gareth Hughes <gareth@valinux.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "drm.h"
 #include "drm_sarea.h"
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index fae00c0..29afd71 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -93,7 +93,7 @@
 {
 	struct drm_radeon_cs *cs = data;
 	uint64_t *chunk_array_ptr;
-	unsigned size, i;
+	unsigned size, i, flags = 0;
 
 	if (!cs->num_chunks) {
 		return 0;
@@ -140,6 +140,10 @@
 			if (p->chunks[i].length_dw == 0)
 				return -EINVAL;
 		}
+		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS &&
+		    !p->chunks[i].length_dw) {
+			return -EINVAL;
+		}
 
 		p->chunks[i].length_dw = user_chunk.length_dw;
 		p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
@@ -155,6 +159,9 @@
 					       p->chunks[i].user_ptr, size)) {
 				return -EFAULT;
 			}
+			if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS) {
+				flags = p->chunks[i].kdata[0];
+			}
 		} else {
 			p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
 			p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
@@ -174,6 +181,8 @@
 			  p->chunks[p->chunk_ib_idx].length_dw);
 		return -EINVAL;
 	}
+
+	p->keep_tiling_flags = (flags & RADEON_CS_KEEP_TILING_FLAGS) != 0;
 	return 0;
 }
 
@@ -222,7 +231,7 @@
 	struct radeon_cs_chunk *ib_chunk;
 	int r;
 
-	mutex_lock(&rdev->cs_mutex);
+	radeon_mutex_lock(&rdev->cs_mutex);
 	/* initialize parser */
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;
@@ -233,14 +242,14 @@
 	if (r) {
 		DRM_ERROR("Failed to initialize parser !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r =  radeon_ib_get(rdev, &parser.ib);
 	if (r) {
 		DRM_ERROR("Failed to get ib !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_cs_parser_relocs(&parser);
@@ -248,7 +257,7 @@
 		if (r != -ERESTARTSYS)
 			DRM_ERROR("Failed to parse relocation %d!\n", r);
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	/* Copy the packet into the IB, the parser will read from the
@@ -260,14 +269,14 @@
 	if (r || parser.parser_error) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_cs_finish_pages(&parser);
 	if (r) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_ib_schedule(rdev, parser.ib);
@@ -275,7 +284,7 @@
 		DRM_ERROR("Failed to schedule IB !\n");
 	}
 	radeon_cs_parser_fini(&parser, r);
-	mutex_unlock(&rdev->cs_mutex);
+	radeon_mutex_unlock(&rdev->cs_mutex);
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index c33bc91..c4d00a1 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -716,7 +716,7 @@
 
 	/* mutex initialization are all done here so we
 	 * can recall function without having locking issues */
-	mutex_init(&rdev->cs_mutex);
+	radeon_mutex_init(&rdev->cs_mutex);
 	mutex_init(&rdev->ib_pool.mutex);
 	mutex_init(&rdev->cp.mutex);
 	mutex_init(&rdev->dc_hw_i2c_mutex);
@@ -955,6 +955,9 @@
 	int r;
 	int resched;
 
+	/* Prevent CS ioctl from interfering */
+	radeon_mutex_lock(&rdev->cs_mutex);
+
 	radeon_save_bios_scratch_regs(rdev);
 	/* block TTM */
 	resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
@@ -967,10 +970,15 @@
 		radeon_restore_bios_scratch_regs(rdev);
 		drm_helper_resume_force_mode(rdev->ddev);
 		ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-		return 0;
 	}
-	/* bad news, how to tell it to userspace ? */
-	dev_info(rdev->dev, "GPU reset failed\n");
+
+	radeon_mutex_unlock(&rdev->cs_mutex);
+
+	if (r) {
+		/* bad news, how to tell it to userspace ? */
+		dev_info(rdev->dev, "GPU reset failed\n");
+	}
+
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 6adb3e5..a22d6e6 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -33,8 +33,6 @@
 #include "drm_crtc_helper.h"
 #include "drm_edid.h"
 
-static int radeon_ddc_dump(struct drm_connector *connector);
-
 static void avivo_crtc_load_lut(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -669,7 +667,6 @@
 static bool radeon_setup_enc_conn(struct drm_device *dev)
 {
 	struct radeon_device *rdev = dev->dev_private;
-	struct drm_connector *drm_connector;
 	bool ret = false;
 
 	if (rdev->bios) {
@@ -689,8 +686,6 @@
 	if (ret) {
 		radeon_setup_encoder_clones(dev);
 		radeon_print_display_setup(dev);
-		list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head)
-			radeon_ddc_dump(drm_connector);
 	}
 
 	return ret;
@@ -708,7 +703,8 @@
 
 	if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
 	    (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) ||
-	    radeon_connector_encoder_is_dp_bridge(&radeon_connector->base)) {
+	    (radeon_connector_encoder_get_dp_bridge_encoder_id(&radeon_connector->base) !=
+	     ENCODER_OBJECT_ID_NONE)) {
 		struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
 
 		if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
@@ -743,34 +739,6 @@
 	return 0;
 }
 
-static int radeon_ddc_dump(struct drm_connector *connector)
-{
-	struct edid *edid;
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-	int ret = 0;
-
-	/* on hw with routers, select right port */
-	if (radeon_connector->router.ddc_valid)
-		radeon_router_select_ddc_port(radeon_connector);
-
-	if (!radeon_connector->ddc_bus)
-		return -1;
-	edid = drm_get_edid(connector, &radeon_connector->ddc_bus->adapter);
-	/* Log EDID retrieval status here. In particular with regard to
-	 * connectors with requires_extended_probe flag set, that will prevent
-	 * function radeon_dvi_detect() to fetch EDID on this connector,
-	 * as long as there is no valid EDID header found */
-	if (edid) {
-		DRM_INFO("Radeon display connector %s: Found valid EDID",
-				drm_get_connector_name(connector));
-		kfree(edid);
-	} else {
-		DRM_INFO("Radeon display connector %s: No monitor connected or invalid EDID",
-				drm_get_connector_name(connector));
-	}
-	return ret;
-}
-
 /* avivo */
 static void avivo_get_fb_div(struct radeon_pll *pll,
 			     u32 target_clock,
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index e71d2ed..71499fc 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -36,6 +36,7 @@
 
 #include "drm_pciids.h"
 #include <linux/console.h>
+#include <linux/module.h>
 
 
 /*
@@ -52,9 +53,10 @@
  *   2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query
  *   2.10.0 - fusion 2D tiling
  *   2.11.0 - backend map, initial compute support for the CS checker
+ *   2.12.0 - RADEON_CS_KEEP_TILING_FLAGS
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	11
+#define KMS_DRIVER_MINOR	12
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
@@ -118,6 +120,7 @@
 int radeon_disp_priority = 0;
 int radeon_hw_i2c = 0;
 int radeon_pcie_gen2 = 0;
+int radeon_msi = -1;
 
 MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
 module_param_named(no_wb, radeon_no_wb, int, 0444);
@@ -164,6 +167,9 @@
 MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (1 = enable)");
 module_param_named(pcie_gen2, radeon_pcie_gen2, int, 0444);
 
+MODULE_PARM_DESC(msi, "MSI support (1 = enable, 0 = disable, -1 = auto)");
+module_param_named(msi, radeon_msi, int, 0444);
+
 static int radeon_suspend(struct drm_device *dev, pm_message_t state)
 {
 	drm_radeon_private_t *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index eb3f6dc..06e413e 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -29,12 +29,6 @@
 #include "radeon.h"
 #include "atom.h"
 
-extern int atom_debug;
-
-/* evil but including atombios.h is much worse */
-bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
-				struct drm_display_mode *mode);
-
 static uint32_t radeon_encoder_clones(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
@@ -156,27 +150,6 @@
 	return ret;
 }
 
-static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
-{
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-		return true;
-	default:
-		return false;
-	}
-}
-
 void
 radeon_link_encoder_connector(struct drm_device *dev)
 {
@@ -229,23 +202,7 @@
 	return NULL;
 }
 
-static struct drm_connector *
-radeon_get_connector_for_encoder_init(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_connector *connector;
-	struct radeon_connector *radeon_connector;
-
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		radeon_connector = to_radeon_connector(connector);
-		if (radeon_encoder->devices & radeon_connector->devices)
-			return connector;
-	}
-	return NULL;
-}
-
-struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder)
+struct drm_encoder *radeon_get_external_encoder(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
@@ -266,9 +223,9 @@
 	return NULL;
 }
 
-bool radeon_encoder_is_dp_bridge(struct drm_encoder *encoder)
+u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder)
 {
-	struct drm_encoder *other_encoder = radeon_atom_get_external_encoder(encoder);
+	struct drm_encoder *other_encoder = radeon_get_external_encoder(encoder);
 
 	if (other_encoder) {
 		struct radeon_encoder *radeon_encoder = to_radeon_encoder(other_encoder);
@@ -332,2105 +289,3 @@
 
 }
 
-static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
-				   struct drm_display_mode *mode,
-				   struct drm_display_mode *adjusted_mode)
-{
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-
-	/* set the active encoder to connector routing */
-	radeon_encoder_set_active_device(encoder);
-	drm_mode_set_crtcinfo(adjusted_mode, 0);
-
-	/* hw bug */
-	if ((mode->flags & DRM_MODE_FLAG_INTERLACE)
-	    && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
-		adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
-
-	/* get the native mode for LVDS */
-	if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
-		radeon_panel_mode_fixup(encoder, adjusted_mode);
-
-	/* get the native mode for TV */
-	if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
-		struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
-		if (tv_dac) {
-			if (tv_dac->tv_std == TV_STD_NTSC ||
-			    tv_dac->tv_std == TV_STD_NTSC_J ||
-			    tv_dac->tv_std == TV_STD_PAL_M)
-				radeon_atom_get_tv_timings(rdev, 0, adjusted_mode);
-			else
-				radeon_atom_get_tv_timings(rdev, 1, adjusted_mode);
-		}
-	}
-
-	if (ASIC_IS_DCE3(rdev) &&
-	    ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
-	     radeon_encoder_is_dp_bridge(encoder))) {
-		struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-		radeon_dp_set_link_config(connector, mode);
-	}
-
-	return true;
-}
-
-static void
-atombios_dac_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	DAC_ENCODER_CONTROL_PS_ALLOCATION args;
-	int index = 0;
-	struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
-
-	memset(&args, 0, sizeof(args));
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-		index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-		index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
-		break;
-	}
-
-	args.ucAction = action;
-
-	if (radeon_encoder->active_device & (ATOM_DEVICE_CRT_SUPPORT))
-		args.ucDacStandard = ATOM_DAC1_PS2;
-	else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-		args.ucDacStandard = ATOM_DAC1_CV;
-	else {
-		switch (dac_info->tv_std) {
-		case TV_STD_PAL:
-		case TV_STD_PAL_M:
-		case TV_STD_SCART_PAL:
-		case TV_STD_SECAM:
-		case TV_STD_PAL_CN:
-			args.ucDacStandard = ATOM_DAC1_PAL;
-			break;
-		case TV_STD_NTSC:
-		case TV_STD_NTSC_J:
-		case TV_STD_PAL_60:
-		default:
-			args.ucDacStandard = ATOM_DAC1_NTSC;
-			break;
-		}
-	}
-	args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_tv_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	TV_ENCODER_CONTROL_PS_ALLOCATION args;
-	int index = 0;
-	struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
-
-	memset(&args, 0, sizeof(args));
-
-	index = GetIndexIntoMasterTable(COMMAND, TVEncoderControl);
-
-	args.sTVEncoder.ucAction = action;
-
-	if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-		args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
-	else {
-		switch (dac_info->tv_std) {
-		case TV_STD_NTSC:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
-			break;
-		case TV_STD_PAL:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL;
-			break;
-		case TV_STD_PAL_M:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_PALM;
-			break;
-		case TV_STD_PAL_60:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL60;
-			break;
-		case TV_STD_NTSC_J:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSCJ;
-			break;
-		case TV_STD_SCART_PAL:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL; /* ??? */
-			break;
-		case TV_STD_SECAM:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_SECAM;
-			break;
-		case TV_STD_PAL_CN:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_PALCN;
-			break;
-		default:
-			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
-			break;
-		}
-	}
-
-	args.sTVEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-union dvo_encoder_control {
-	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
-	DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
-	DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
-};
-
-void
-atombios_dvo_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	union dvo_encoder_control args;
-	int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
-
-	memset(&args, 0, sizeof(args));
-
-	if (ASIC_IS_DCE3(rdev)) {
-		/* DCE3+ */
-		args.dvo_v3.ucAction = action;
-		args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-		args.dvo_v3.ucDVOConfig = 0; /* XXX */
-	} else if (ASIC_IS_DCE2(rdev)) {
-		/* DCE2 (pre-DCE3 R6xx, RS600/690/740 */
-		args.dvo.sDVOEncoder.ucAction = action;
-		args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-		/* DFP1, CRT1, TV1 depending on the type of port */
-		args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
-
-		if (radeon_encoder->pixel_clock > 165000)
-			args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
-	} else {
-		/* R4xx, R5xx */
-		args.ext_tmds.sXTmdsEncoder.ucEnable = action;
-
-		if (radeon_encoder->pixel_clock > 165000)
-			args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-
-		/*if (pScrn->rgbBits == 8)*/
-		args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-union lvds_encoder_control {
-	LVDS_ENCODER_CONTROL_PS_ALLOCATION    v1;
-	LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 v2;
-};
-
-void
-atombios_digital_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	union lvds_encoder_control args;
-	int index = 0;
-	int hdmi_detected = 0;
-	uint8_t frev, crev;
-
-	if (!dig)
-		return;
-
-	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
-		hdmi_detected = 1;
-
-	memset(&args, 0, sizeof(args));
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-		index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-		index = GetIndexIntoMasterTable(COMMAND, TMDS1EncoderControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
-			index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
-		else
-			index = GetIndexIntoMasterTable(COMMAND, TMDS2EncoderControl);
-		break;
-	}
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		return;
-
-	switch (frev) {
-	case 1:
-	case 2:
-		switch (crev) {
-		case 1:
-			args.v1.ucMisc = 0;
-			args.v1.ucAction = action;
-			if (hdmi_detected)
-				args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
-			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
-					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-				if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
-					args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
-			} else {
-				if (dig->linkb)
-					args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
-				if (radeon_encoder->pixel_clock > 165000)
-					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-				/*if (pScrn->rgbBits == 8) */
-				args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
-			}
-			break;
-		case 2:
-		case 3:
-			args.v2.ucMisc = 0;
-			args.v2.ucAction = action;
-			if (crev == 3) {
-				if (dig->coherent_mode)
-					args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
-			}
-			if (hdmi_detected)
-				args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
-			args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-			args.v2.ucTruncate = 0;
-			args.v2.ucSpatial = 0;
-			args.v2.ucTemporal = 0;
-			args.v2.ucFRC = 0;
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
-					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-				if (dig->lcd_misc & ATOM_PANEL_MISC_SPATIAL) {
-					args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN;
-					if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
-						args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH;
-				}
-				if (dig->lcd_misc & ATOM_PANEL_MISC_TEMPORAL) {
-					args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN;
-					if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
-						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH;
-					if (((dig->lcd_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2)
-						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4;
-				}
-			} else {
-				if (dig->linkb)
-					args.v2.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
-				if (radeon_encoder->pixel_clock > 165000)
-					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
-			}
-			break;
-		default:
-			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
-			break;
-		}
-		break;
-	default:
-		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
-		break;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-int
-atombios_get_encoder_mode(struct drm_encoder *encoder)
-{
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct drm_connector *connector;
-	struct radeon_connector *radeon_connector;
-	struct radeon_connector_atom_dig *dig_connector;
-
-	/* dp bridges are always DP */
-	if (radeon_encoder_is_dp_bridge(encoder))
-		return ATOM_ENCODER_MODE_DP;
-
-	/* DVO is always DVO */
-	if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
-		return ATOM_ENCODER_MODE_DVO;
-
-	connector = radeon_get_connector_for_encoder(encoder);
-	/* if we don't have an active device yet, just use one of
-	 * the connectors tied to the encoder.
-	 */
-	if (!connector)
-		connector = radeon_get_connector_for_encoder_init(encoder);
-	radeon_connector = to_radeon_connector(connector);
-
-	switch (connector->connector_type) {
-	case DRM_MODE_CONNECTOR_DVII:
-	case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
-		if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
-			/* fix me */
-			if (ASIC_IS_DCE4(rdev))
-				return ATOM_ENCODER_MODE_DVI;
-			else
-				return ATOM_ENCODER_MODE_HDMI;
-		} else if (radeon_connector->use_digital)
-			return ATOM_ENCODER_MODE_DVI;
-		else
-			return ATOM_ENCODER_MODE_CRT;
-		break;
-	case DRM_MODE_CONNECTOR_DVID:
-	case DRM_MODE_CONNECTOR_HDMIA:
-	default:
-		if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
-			/* fix me */
-			if (ASIC_IS_DCE4(rdev))
-				return ATOM_ENCODER_MODE_DVI;
-			else
-				return ATOM_ENCODER_MODE_HDMI;
-		} else
-			return ATOM_ENCODER_MODE_DVI;
-		break;
-	case DRM_MODE_CONNECTOR_LVDS:
-		return ATOM_ENCODER_MODE_LVDS;
-		break;
-	case DRM_MODE_CONNECTOR_DisplayPort:
-		dig_connector = radeon_connector->con_priv;
-		if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
-		    (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
-			return ATOM_ENCODER_MODE_DP;
-		else if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) {
-			/* fix me */
-			if (ASIC_IS_DCE4(rdev))
-				return ATOM_ENCODER_MODE_DVI;
-			else
-				return ATOM_ENCODER_MODE_HDMI;
-		} else
-			return ATOM_ENCODER_MODE_DVI;
-		break;
-	case DRM_MODE_CONNECTOR_eDP:
-		return ATOM_ENCODER_MODE_DP;
-	case DRM_MODE_CONNECTOR_DVIA:
-	case DRM_MODE_CONNECTOR_VGA:
-		return ATOM_ENCODER_MODE_CRT;
-		break;
-	case DRM_MODE_CONNECTOR_Composite:
-	case DRM_MODE_CONNECTOR_SVIDEO:
-	case DRM_MODE_CONNECTOR_9PinDIN:
-		/* fix me */
-		return ATOM_ENCODER_MODE_TV;
-		/*return ATOM_ENCODER_MODE_CV;*/
-		break;
-	}
-}
-
-/*
- * DIG Encoder/Transmitter Setup
- *
- * DCE 3.0/3.1
- * - 2 DIG transmitter blocks. UNIPHY (links A and B) and LVTMA.
- * Supports up to 3 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1 can drive UNIPHY link A or link B
- * DIG2 can drive UNIPHY link B or LVTMA
- *
- * DCE 3.2
- * - 3 DIG transmitter blocks. UNIPHY0/1/2 (links A and B).
- * Supports up to 5 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1/2 can drive UNIPHY0/1/2 link A or link B
- *
- * DCE 4.0/5.0
- * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
- * Supports up to 6 digital outputs
- * - 6 DIG encoder blocks.
- * - DIG to PHY mapping is hardcoded
- * DIG1 drives UNIPHY0 link A, A+B
- * DIG2 drives UNIPHY0 link B
- * DIG3 drives UNIPHY1 link A, A+B
- * DIG4 drives UNIPHY1 link B
- * DIG5 drives UNIPHY2 link A, A+B
- * DIG6 drives UNIPHY2 link B
- *
- * DCE 4.1
- * - 3 DIG transmitter blocks UNIPHY0/1/2 (links A and B).
- * Supports up to 6 digital outputs
- * - 2 DIG encoder blocks.
- * DIG1/2 can drive UNIPHY0/1/2 link A or link B
- *
- * Routing
- * crtc -> dig encoder -> UNIPHY/LVTMA (1 or 2 links)
- * Examples:
- * crtc0 -> dig2 -> LVTMA   links A+B -> TMDS/HDMI
- * crtc1 -> dig1 -> UNIPHY0 link  B   -> DP
- * crtc0 -> dig1 -> UNIPHY2 link  A   -> LVDS
- * crtc1 -> dig2 -> UNIPHY1 link  B+A -> TMDS/HDMI
- */
-
-union dig_encoder_control {
-	DIG_ENCODER_CONTROL_PS_ALLOCATION v1;
-	DIG_ENCODER_CONTROL_PARAMETERS_V2 v2;
-	DIG_ENCODER_CONTROL_PARAMETERS_V3 v3;
-	DIG_ENCODER_CONTROL_PARAMETERS_V4 v4;
-};
-
-void
-atombios_dig_encoder_setup(struct drm_encoder *encoder, int action, int panel_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-	union dig_encoder_control args;
-	int index = 0;
-	uint8_t frev, crev;
-	int dp_clock = 0;
-	int dp_lane_count = 0;
-	int hpd_id = RADEON_HPD_NONE;
-	int bpc = 8;
-
-	if (connector) {
-		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-		struct radeon_connector_atom_dig *dig_connector =
-			radeon_connector->con_priv;
-
-		dp_clock = dig_connector->dp_clock;
-		dp_lane_count = dig_connector->dp_lane_count;
-		hpd_id = radeon_connector->hpd.hpd;
-		bpc = connector->display_info.bpc;
-	}
-
-	/* no dig encoder assigned */
-	if (dig->dig_encoder == -1)
-		return;
-
-	memset(&args, 0, sizeof(args));
-
-	if (ASIC_IS_DCE4(rdev))
-		index = GetIndexIntoMasterTable(COMMAND, DIGxEncoderControl);
-	else {
-		if (dig->dig_encoder)
-			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
-		else
-			index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
-	}
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		return;
-
-	args.v1.ucAction = action;
-	args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-	if (action == ATOM_ENCODER_CMD_SETUP_PANEL_MODE)
-		args.v3.ucPanelMode = panel_mode;
-	else
-		args.v1.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
-	if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) ||
-	    (args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP_MST))
-		args.v1.ucLaneNum = dp_lane_count;
-	else if (radeon_encoder->pixel_clock > 165000)
-		args.v1.ucLaneNum = 8;
-	else
-		args.v1.ucLaneNum = 4;
-
-	if (ASIC_IS_DCE5(rdev)) {
-		if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) ||
-		    (args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP_MST)) {
-			if (dp_clock == 270000)
-				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ;
-			else if (dp_clock == 540000)
-				args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ;
-		}
-		args.v4.acConfig.ucDigSel = dig->dig_encoder;
-		switch (bpc) {
-		case 0:
-			args.v4.ucBitPerColor = PANEL_BPC_UNDEFINE;
-			break;
-		case 6:
-			args.v4.ucBitPerColor = PANEL_6BIT_PER_COLOR;
-			break;
-		case 8:
-		default:
-			args.v4.ucBitPerColor = PANEL_8BIT_PER_COLOR;
-			break;
-		case 10:
-			args.v4.ucBitPerColor = PANEL_10BIT_PER_COLOR;
-			break;
-		case 12:
-			args.v4.ucBitPerColor = PANEL_12BIT_PER_COLOR;
-			break;
-		case 16:
-			args.v4.ucBitPerColor = PANEL_16BIT_PER_COLOR;
-			break;
-		}
-		if (hpd_id == RADEON_HPD_NONE)
-			args.v4.ucHPD_ID = 0;
-		else
-			args.v4.ucHPD_ID = hpd_id + 1;
-	} else if (ASIC_IS_DCE4(rdev)) {
-		if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) && (dp_clock == 270000))
-			args.v1.ucConfig |= ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
-		args.v3.acConfig.ucDigSel = dig->dig_encoder;
-		switch (bpc) {
-		case 0:
-			args.v3.ucBitPerColor = PANEL_BPC_UNDEFINE;
-			break;
-		case 6:
-			args.v3.ucBitPerColor = PANEL_6BIT_PER_COLOR;
-			break;
-		case 8:
-		default:
-			args.v3.ucBitPerColor = PANEL_8BIT_PER_COLOR;
-			break;
-		case 10:
-			args.v3.ucBitPerColor = PANEL_10BIT_PER_COLOR;
-			break;
-		case 12:
-			args.v3.ucBitPerColor = PANEL_12BIT_PER_COLOR;
-			break;
-		case 16:
-			args.v3.ucBitPerColor = PANEL_16BIT_PER_COLOR;
-			break;
-		}
-	} else {
-		if ((args.v1.ucEncoderMode == ATOM_ENCODER_MODE_DP) && (dp_clock == 270000))
-			args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
-		switch (radeon_encoder->encoder_id) {
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-			args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER2;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-			args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER3;
-			break;
-		}
-		if (dig->linkb)
-			args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
-		else
-			args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-union dig_transmitter_control {
-	DIG_TRANSMITTER_CONTROL_PS_ALLOCATION v1;
-	DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 v2;
-	DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 v3;
-	DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 v4;
-};
-
-void
-atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t lane_num, uint8_t lane_set)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-	struct drm_connector *connector;
-	union dig_transmitter_control args;
-	int index = 0;
-	uint8_t frev, crev;
-	bool is_dp = false;
-	int pll_id = 0;
-	int dp_clock = 0;
-	int dp_lane_count = 0;
-	int connector_object_id = 0;
-	int igp_lane_info = 0;
-	int dig_encoder = dig->dig_encoder;
-
-	if (action == ATOM_TRANSMITTER_ACTION_INIT) {
-		connector = radeon_get_connector_for_encoder_init(encoder);
-		/* just needed to avoid bailing in the encoder check.  the encoder
-		 * isn't used for init
-		 */
-		dig_encoder = 0;
-	} else
-		connector = radeon_get_connector_for_encoder(encoder);
-
-	if (connector) {
-		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-		struct radeon_connector_atom_dig *dig_connector =
-			radeon_connector->con_priv;
-
-		dp_clock = dig_connector->dp_clock;
-		dp_lane_count = dig_connector->dp_lane_count;
-		connector_object_id =
-			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
-		igp_lane_info = dig_connector->igp_lane_info;
-	}
-
-	/* no dig encoder assigned */
-	if (dig_encoder == -1)
-		return;
-
-	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP)
-		is_dp = true;
-
-	memset(&args, 0, sizeof(args));
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-		index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		index = GetIndexIntoMasterTable(COMMAND, LVTMATransmitterControl);
-		break;
-	}
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		return;
-
-	args.v1.ucAction = action;
-	if (action == ATOM_TRANSMITTER_ACTION_INIT) {
-		args.v1.usInitInfo = cpu_to_le16(connector_object_id);
-	} else if (action == ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH) {
-		args.v1.asMode.ucLaneSel = lane_num;
-		args.v1.asMode.ucLaneSet = lane_set;
-	} else {
-		if (is_dp)
-			args.v1.usPixelClock =
-				cpu_to_le16(dp_clock / 10);
-		else if (radeon_encoder->pixel_clock > 165000)
-			args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
-		else
-			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-	}
-	if (ASIC_IS_DCE4(rdev)) {
-		if (is_dp)
-			args.v3.ucLaneNum = dp_lane_count;
-		else if (radeon_encoder->pixel_clock > 165000)
-			args.v3.ucLaneNum = 8;
-		else
-			args.v3.ucLaneNum = 4;
-
-		if (dig->linkb)
-			args.v3.acConfig.ucLinkSel = 1;
-		if (dig_encoder & 1)
-			args.v3.acConfig.ucEncoderSel = 1;
-
-		/* Select the PLL for the PHY
-		 * DP PHY should be clocked from external src if there is
-		 * one.
-		 */
-		if (encoder->crtc) {
-			struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-			pll_id = radeon_crtc->pll_id;
-		}
-
-		if (ASIC_IS_DCE5(rdev)) {
-			/* On DCE5 DCPLL usually generates the DP ref clock */
-			if (is_dp) {
-				if (rdev->clock.dp_extclk)
-					args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_EXTCLK;
-				else
-					args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_DCPLL;
-			} else
-				args.v4.acConfig.ucRefClkSource = pll_id;
-		} else {
-			/* On DCE4, if there is an external clock, it generates the DP ref clock */
-			if (is_dp && rdev->clock.dp_extclk)
-				args.v3.acConfig.ucRefClkSource = 2; /* external src */
-			else
-				args.v3.acConfig.ucRefClkSource = pll_id;
-		}
-
-		switch (radeon_encoder->encoder_id) {
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			args.v3.acConfig.ucTransmitterSel = 0;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-			args.v3.acConfig.ucTransmitterSel = 1;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-			args.v3.acConfig.ucTransmitterSel = 2;
-			break;
-		}
-
-		if (is_dp)
-			args.v3.acConfig.fCoherentMode = 1; /* DP requires coherent */
-		else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
-			if (dig->coherent_mode)
-				args.v3.acConfig.fCoherentMode = 1;
-			if (radeon_encoder->pixel_clock > 165000)
-				args.v3.acConfig.fDualLinkConnector = 1;
-		}
-	} else if (ASIC_IS_DCE32(rdev)) {
-		args.v2.acConfig.ucEncoderSel = dig_encoder;
-		if (dig->linkb)
-			args.v2.acConfig.ucLinkSel = 1;
-
-		switch (radeon_encoder->encoder_id) {
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			args.v2.acConfig.ucTransmitterSel = 0;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-			args.v2.acConfig.ucTransmitterSel = 1;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-			args.v2.acConfig.ucTransmitterSel = 2;
-			break;
-		}
-
-		if (is_dp) {
-			args.v2.acConfig.fCoherentMode = 1;
-			args.v2.acConfig.fDPConnector = 1;
-		} else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
-			if (dig->coherent_mode)
-				args.v2.acConfig.fCoherentMode = 1;
-			if (radeon_encoder->pixel_clock > 165000)
-				args.v2.acConfig.fDualLinkConnector = 1;
-		}
-	} else {
-		args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
-
-		if (dig_encoder)
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
-		else
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
-
-		if ((rdev->flags & RADEON_IS_IGP) &&
-		    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY)) {
-			if (is_dp || (radeon_encoder->pixel_clock <= 165000)) {
-				if (igp_lane_info & 0x1)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
-				else if (igp_lane_info & 0x2)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
-				else if (igp_lane_info & 0x4)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
-				else if (igp_lane_info & 0x8)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
-			} else {
-				if (igp_lane_info & 0x3)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
-				else if (igp_lane_info & 0xc)
-					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
-			}
-		}
-
-		if (dig->linkb)
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB;
-		else
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA;
-
-		if (is_dp)
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
-		else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
-			if (dig->coherent_mode)
-				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
-			if (radeon_encoder->pixel_clock > 165000)
-				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
-		}
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-bool
-atombios_set_edp_panel_power(struct drm_connector *connector, int action)
-{
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-	struct drm_device *dev = radeon_connector->base.dev;
-	struct radeon_device *rdev = dev->dev_private;
-	union dig_transmitter_control args;
-	int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
-	uint8_t frev, crev;
-
-	if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
-		goto done;
-
-	if (!ASIC_IS_DCE4(rdev))
-		goto done;
-
-	if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) &&
-	    (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
-		goto done;
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		goto done;
-
-	memset(&args, 0, sizeof(args));
-
-	args.v1.ucAction = action;
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-	/* wait for the panel to power up */
-	if (action == ATOM_TRANSMITTER_ACTION_POWER_ON) {
-		int i;
-
-		for (i = 0; i < 300; i++) {
-			if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
-				return true;
-			mdelay(1);
-		}
-		return false;
-	}
-done:
-	return true;
-}
-
-union external_encoder_control {
-	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
-	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 v3;
-};
-
-static void
-atombios_external_encoder_setup(struct drm_encoder *encoder,
-				struct drm_encoder *ext_encoder,
-				int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
-	union external_encoder_control args;
-	struct drm_connector *connector;
-	int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
-	u8 frev, crev;
-	int dp_clock = 0;
-	int dp_lane_count = 0;
-	int connector_object_id = 0;
-	u32 ext_enum = (ext_radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
-	int bpc = 8;
-
-	if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
-		connector = radeon_get_connector_for_encoder_init(encoder);
-	else
-		connector = radeon_get_connector_for_encoder(encoder);
-
-	if (connector) {
-		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-		struct radeon_connector_atom_dig *dig_connector =
-			radeon_connector->con_priv;
-
-		dp_clock = dig_connector->dp_clock;
-		dp_lane_count = dig_connector->dp_lane_count;
-		connector_object_id =
-			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
-		bpc = connector->display_info.bpc;
-	}
-
-	memset(&args, 0, sizeof(args));
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		return;
-
-	switch (frev) {
-	case 1:
-		/* no params on frev 1 */
-		break;
-	case 2:
-		switch (crev) {
-		case 1:
-		case 2:
-			args.v1.sDigEncoder.ucAction = action;
-			args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-			args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
-			if (args.v1.sDigEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
-				if (dp_clock == 270000)
-					args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
-				args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
-			} else if (radeon_encoder->pixel_clock > 165000)
-				args.v1.sDigEncoder.ucLaneNum = 8;
-			else
-				args.v1.sDigEncoder.ucLaneNum = 4;
-			break;
-		case 3:
-			args.v3.sExtEncoder.ucAction = action;
-			if (action == EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT)
-				args.v3.sExtEncoder.usConnectorId = cpu_to_le16(connector_object_id);
-			else
-				args.v3.sExtEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
-			args.v3.sExtEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
-
-			if (args.v3.sExtEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
-				if (dp_clock == 270000)
-					args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ;
-				else if (dp_clock == 540000)
-					args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ;
-				args.v3.sExtEncoder.ucLaneNum = dp_lane_count;
-			} else if (radeon_encoder->pixel_clock > 165000)
-				args.v3.sExtEncoder.ucLaneNum = 8;
-			else
-				args.v3.sExtEncoder.ucLaneNum = 4;
-			switch (ext_enum) {
-			case GRAPH_OBJECT_ENUM_ID1:
-				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER1;
-				break;
-			case GRAPH_OBJECT_ENUM_ID2:
-				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER2;
-				break;
-			case GRAPH_OBJECT_ENUM_ID3:
-				args.v3.sExtEncoder.ucConfig |= EXTERNAL_ENCODER_CONFIG_V3_ENCODER3;
-				break;
-			}
-			switch (bpc) {
-			case 0:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_BPC_UNDEFINE;
-				break;
-			case 6:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_6BIT_PER_COLOR;
-				break;
-			case 8:
-			default:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_8BIT_PER_COLOR;
-				break;
-			case 10:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_10BIT_PER_COLOR;
-				break;
-			case 12:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_12BIT_PER_COLOR;
-				break;
-			case 16:
-				args.v3.sExtEncoder.ucBitPerColor = PANEL_16BIT_PER_COLOR;
-				break;
-			}
-			break;
-		default:
-			DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
-			return;
-		}
-		break;
-	default:
-		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
-		return;
-	}
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-}
-
-static void
-atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	ENABLE_YUV_PS_ALLOCATION args;
-	int index = GetIndexIntoMasterTable(COMMAND, EnableYUV);
-	uint32_t temp, reg;
-
-	memset(&args, 0, sizeof(args));
-
-	if (rdev->family >= CHIP_R600)
-		reg = R600_BIOS_3_SCRATCH;
-	else
-		reg = RADEON_BIOS_3_SCRATCH;
-
-	/* XXX: fix up scratch reg handling */
-	temp = RREG32(reg);
-	if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-		WREG32(reg, (ATOM_S3_TV1_ACTIVE |
-			     (radeon_crtc->crtc_id << 18)));
-	else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-		WREG32(reg, (ATOM_S3_CV_ACTIVE | (radeon_crtc->crtc_id << 24)));
-	else
-		WREG32(reg, 0);
-
-	if (enable)
-		args.ucEnable = ATOM_ENABLE;
-	args.ucCRTC = radeon_crtc->crtc_id;
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-	WREG32(reg, temp);
-}
-
-static void
-radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-	DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
-	int index = 0;
-	bool is_dig = false;
-	bool is_dce5_dac = false;
-	bool is_dce5_dvo = false;
-
-	memset(&args, 0, sizeof(args));
-
-	DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
-		  radeon_encoder->encoder_id, mode, radeon_encoder->devices,
-		  radeon_encoder->active_device);
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-		index = GetIndexIntoMasterTable(COMMAND, TMDSAOutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		is_dig = true;
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		if (ASIC_IS_DCE5(rdev))
-			is_dce5_dvo = true;
-		else if (ASIC_IS_DCE3(rdev))
-			is_dig = true;
-		else
-			index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-		index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
-			index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
-		else
-			index = GetIndexIntoMasterTable(COMMAND, LVTMAOutputControl);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-		if (ASIC_IS_DCE5(rdev))
-			is_dce5_dac = true;
-		else {
-			if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-				index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
-			else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-				index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
-			else
-				index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
-		}
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-		if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-			index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
-		else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-			index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
-		else
-			index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
-		break;
-	}
-
-	if (is_dig) {
-		switch (mode) {
-		case DRM_MODE_DPMS_ON:
-			/* some early dce3.2 boards have a bug in their transmitter control table */
-			if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-			else
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
-			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
-				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
-				if (connector &&
-				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
-					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-					struct radeon_connector_atom_dig *radeon_dig_connector =
-						radeon_connector->con_priv;
-					atombios_set_edp_panel_power(connector,
-								     ATOM_TRANSMITTER_ACTION_POWER_ON);
-					radeon_dig_connector->edp_on = true;
-				}
-				if (ASIC_IS_DCE4(rdev))
-					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
-				radeon_dp_link_train(encoder, connector);
-				if (ASIC_IS_DCE4(rdev))
-					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
-			}
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
-			break;
-		case DRM_MODE_DPMS_STANDBY:
-		case DRM_MODE_DPMS_SUSPEND:
-		case DRM_MODE_DPMS_OFF:
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
-			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
-				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
-				if (ASIC_IS_DCE4(rdev))
-					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
-				if (connector &&
-				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
-					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-					struct radeon_connector_atom_dig *radeon_dig_connector =
-						radeon_connector->con_priv;
-					atombios_set_edp_panel_power(connector,
-								     ATOM_TRANSMITTER_ACTION_POWER_OFF);
-					radeon_dig_connector->edp_on = false;
-				}
-			}
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
-			break;
-		}
-	} else if (is_dce5_dac) {
-		switch (mode) {
-		case DRM_MODE_DPMS_ON:
-			atombios_dac_setup(encoder, ATOM_ENABLE);
-			break;
-		case DRM_MODE_DPMS_STANDBY:
-		case DRM_MODE_DPMS_SUSPEND:
-		case DRM_MODE_DPMS_OFF:
-			atombios_dac_setup(encoder, ATOM_DISABLE);
-			break;
-		}
-	} else if (is_dce5_dvo) {
-		switch (mode) {
-		case DRM_MODE_DPMS_ON:
-			atombios_dvo_setup(encoder, ATOM_ENABLE);
-			break;
-		case DRM_MODE_DPMS_STANDBY:
-		case DRM_MODE_DPMS_SUSPEND:
-		case DRM_MODE_DPMS_OFF:
-			atombios_dvo_setup(encoder, ATOM_DISABLE);
-			break;
-		}
-	} else {
-		switch (mode) {
-		case DRM_MODE_DPMS_ON:
-			args.ucAction = ATOM_ENABLE;
-			/* workaround for DVOOutputControl on some RS690 systems */
-			if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
-				u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
-				WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
-				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-				WREG32(RADEON_BIOS_3_SCRATCH, reg);
-			} else
-				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-				args.ucAction = ATOM_LCD_BLON;
-				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-			}
-			break;
-		case DRM_MODE_DPMS_STANDBY:
-		case DRM_MODE_DPMS_SUSPEND:
-		case DRM_MODE_DPMS_OFF:
-			args.ucAction = ATOM_DISABLE;
-			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-				args.ucAction = ATOM_LCD_BLOFF;
-				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-			}
-			break;
-		}
-	}
-
-	if (ext_encoder) {
-		switch (mode) {
-		case DRM_MODE_DPMS_ON:
-		default:
-			if (ASIC_IS_DCE41(rdev)) {
-				atombios_external_encoder_setup(encoder, ext_encoder,
-								EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
-				atombios_external_encoder_setup(encoder, ext_encoder,
-								EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
-			} else
-				atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
-			break;
-		case DRM_MODE_DPMS_STANDBY:
-		case DRM_MODE_DPMS_SUSPEND:
-		case DRM_MODE_DPMS_OFF:
-			if (ASIC_IS_DCE41(rdev)) {
-				atombios_external_encoder_setup(encoder, ext_encoder,
-								EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
-				atombios_external_encoder_setup(encoder, ext_encoder,
-								EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
-			} else
-				atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
-			break;
-		}
-	}
-
-	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
-
-}
-
-union crtc_source_param {
-	SELECT_CRTC_SOURCE_PS_ALLOCATION v1;
-	SELECT_CRTC_SOURCE_PARAMETERS_V2 v2;
-};
-
-static void
-atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	union crtc_source_param args;
-	int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
-	uint8_t frev, crev;
-	struct radeon_encoder_atom_dig *dig;
-
-	memset(&args, 0, sizeof(args));
-
-	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-		return;
-
-	switch (frev) {
-	case 1:
-		switch (crev) {
-		case 1:
-		default:
-			if (ASIC_IS_AVIVO(rdev))
-				args.v1.ucCRTC = radeon_crtc->crtc_id;
-			else {
-				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) {
-					args.v1.ucCRTC = radeon_crtc->crtc_id;
-				} else {
-					args.v1.ucCRTC = radeon_crtc->crtc_id << 2;
-				}
-			}
-			switch (radeon_encoder->encoder_id) {
-			case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-				args.v1.ucDevice = ATOM_DEVICE_DFP1_INDEX;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-			case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-				if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT)
-					args.v1.ucDevice = ATOM_DEVICE_LCD1_INDEX;
-				else
-					args.v1.ucDevice = ATOM_DEVICE_DFP3_INDEX;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-			case ENCODER_OBJECT_ID_INTERNAL_DDI:
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-				args.v1.ucDevice = ATOM_DEVICE_DFP2_INDEX;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
-				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
-				else
-					args.v1.ucDevice = ATOM_DEVICE_CRT1_INDEX;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
-				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
-				else
-					args.v1.ucDevice = ATOM_DEVICE_CRT2_INDEX;
-				break;
-			}
-			break;
-		case 2:
-			args.v2.ucCRTC = radeon_crtc->crtc_id;
-			if (radeon_encoder_is_dp_bridge(encoder)) {
-				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
-				if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
-					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
-				else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
-					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
-				else
-					args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
-			} else
-				args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
-			switch (radeon_encoder->encoder_id) {
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-				dig = radeon_encoder->enc_priv;
-				switch (dig->dig_encoder) {
-				case 0:
-					args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
-					break;
-				case 1:
-					args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
-					break;
-				case 2:
-					args.v2.ucEncoderID = ASIC_INT_DIG3_ENCODER_ID;
-					break;
-				case 3:
-					args.v2.ucEncoderID = ASIC_INT_DIG4_ENCODER_ID;
-					break;
-				case 4:
-					args.v2.ucEncoderID = ASIC_INT_DIG5_ENCODER_ID;
-					break;
-				case 5:
-					args.v2.ucEncoderID = ASIC_INT_DIG6_ENCODER_ID;
-					break;
-				}
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-				args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
-				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
-				else
-					args.v2.ucEncoderID = ASIC_INT_DAC1_ENCODER_ID;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
-					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
-				else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
-					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
-				else
-					args.v2.ucEncoderID = ASIC_INT_DAC2_ENCODER_ID;
-				break;
-			}
-			break;
-		}
-		break;
-	default:
-		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
-		return;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-	/* update scratch regs with new routing */
-	radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
-}
-
-static void
-atombios_apply_encoder_quirks(struct drm_encoder *encoder,
-			      struct drm_display_mode *mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-
-	/* Funky macbooks */
-	if ((dev->pdev->device == 0x71C5) &&
-	    (dev->pdev->subsystem_vendor == 0x106b) &&
-	    (dev->pdev->subsystem_device == 0x0080)) {
-		if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
-			uint32_t lvtma_bit_depth_control = RREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL);
-
-			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN;
-			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN;
-
-			WREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL, lvtma_bit_depth_control);
-		}
-	}
-
-	/* set scaler clears this on some chips */
-	if (ASIC_IS_AVIVO(rdev) &&
-	    (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)))) {
-		if (ASIC_IS_DCE4(rdev)) {
-			if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-				WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset,
-				       EVERGREEN_INTERLEAVE_EN);
-			else
-				WREG32(EVERGREEN_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
-		} else {
-			if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-				WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
-				       AVIVO_D1MODE_INTERLEAVE_EN);
-			else
-				WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
-		}
-	}
-}
-
-static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_encoder *test_encoder;
-	struct radeon_encoder_atom_dig *dig;
-	uint32_t dig_enc_in_use = 0;
-
-	/* DCE4/5 */
-	if (ASIC_IS_DCE4(rdev)) {
-		dig = radeon_encoder->enc_priv;
-		if (ASIC_IS_DCE41(rdev)) {
-			/* ontario follows DCE4 */
-			if (rdev->family == CHIP_PALM) {
-				if (dig->linkb)
-					return 1;
-				else
-					return 0;
-			} else
-				/* llano follows DCE3.2 */
-				return radeon_crtc->crtc_id;
-		} else {
-			switch (radeon_encoder->encoder_id) {
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-				if (dig->linkb)
-					return 1;
-				else
-					return 0;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-				if (dig->linkb)
-					return 3;
-				else
-					return 2;
-				break;
-			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-				if (dig->linkb)
-					return 5;
-				else
-					return 4;
-				break;
-			}
-		}
-	}
-
-	/* on DCE32 and encoder can driver any block so just crtc id */
-	if (ASIC_IS_DCE32(rdev)) {
-		return radeon_crtc->crtc_id;
-	}
-
-	/* on DCE3 - LVTMA can only be driven by DIGB */
-	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
-		struct radeon_encoder *radeon_test_encoder;
-
-		if (encoder == test_encoder)
-			continue;
-
-		if (!radeon_encoder_is_digital(test_encoder))
-			continue;
-
-		radeon_test_encoder = to_radeon_encoder(test_encoder);
-		dig = radeon_test_encoder->enc_priv;
-
-		if (dig->dig_encoder >= 0)
-			dig_enc_in_use |= (1 << dig->dig_encoder);
-	}
-
-	if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
-		if (dig_enc_in_use & 0x2)
-			DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
-		return 1;
-	}
-	if (!(dig_enc_in_use & 1))
-		return 0;
-	return 1;
-}
-
-/* This only needs to be called once at startup */
-void
-radeon_atom_encoder_init(struct radeon_device *rdev)
-{
-	struct drm_device *dev = rdev->ddev;
-	struct drm_encoder *encoder;
-
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-		struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
-		switch (radeon_encoder->encoder_id) {
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT, 0, 0);
-			break;
-		default:
-			break;
-		}
-
-		if (ext_encoder && ASIC_IS_DCE41(rdev))
-			atombios_external_encoder_setup(encoder, ext_encoder,
-							EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT);
-	}
-}
-
-static void
-radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
-			     struct drm_display_mode *mode,
-			     struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
-	radeon_encoder->pixel_clock = adjusted_mode->clock;
-
-	if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
-		if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
-			atombios_yuv_setup(encoder, true);
-		else
-			atombios_yuv_setup(encoder, false);
-	}
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_ENABLE);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE4(rdev)) {
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			/* setup and enable the encoder */
-			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-
-			/* enable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		} else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-
-			/* setup and enable the encoder and transmitter */
-			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		}
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_dvo_setup(encoder, ATOM_ENABLE);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-		atombios_dac_setup(encoder, ATOM_ENABLE);
-		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
-			if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
-				atombios_tv_setup(encoder, ATOM_ENABLE);
-			else
-				atombios_tv_setup(encoder, ATOM_DISABLE);
-		}
-		break;
-	}
-
-	if (ext_encoder) {
-		if (ASIC_IS_DCE41(rdev))
-			atombios_external_encoder_setup(encoder, ext_encoder,
-							EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
-		else
-			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
-	}
-
-	atombios_apply_encoder_quirks(encoder, adjusted_mode);
-
-	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
-		r600_hdmi_enable(encoder);
-		r600_hdmi_setmode(encoder, adjusted_mode);
-	}
-}
-
-static bool
-atombios_dac_load_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-
-	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT |
-				       ATOM_DEVICE_CV_SUPPORT |
-				       ATOM_DEVICE_CRT_SUPPORT)) {
-		DAC_LOAD_DETECTION_PS_ALLOCATION args;
-		int index = GetIndexIntoMasterTable(COMMAND, DAC_LoadDetection);
-		uint8_t frev, crev;
-
-		memset(&args, 0, sizeof(args));
-
-		if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
-			return false;
-
-		args.sDacload.ucMisc = 0;
-
-		if ((radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) ||
-		    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1))
-			args.sDacload.ucDacType = ATOM_DAC_A;
-		else
-			args.sDacload.ucDacType = ATOM_DAC_B;
-
-		if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)
-			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT1_SUPPORT);
-		else if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)
-			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT2_SUPPORT);
-		else if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
-			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CV_SUPPORT);
-			if (crev >= 3)
-				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
-		} else if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
-			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_TV1_SUPPORT);
-			if (crev >= 3)
-				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
-		}
-
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-		return true;
-	} else
-		return false;
-}
-
-static enum drm_connector_status
-radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-	uint32_t bios_0_scratch;
-
-	if (!atombios_dac_load_detect(encoder, connector)) {
-		DRM_DEBUG_KMS("detect returned false \n");
-		return connector_status_unknown;
-	}
-
-	if (rdev->family >= CHIP_R600)
-		bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
-	else
-		bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
-
-	DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
-	if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
-		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
-		if (bios_0_scratch & ATOM_S0_CRT2_MASK)
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
-		if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
-		if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
-			return connector_status_connected; /* CTV */
-		else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
-			return connector_status_connected; /* STV */
-	}
-	return connector_status_disconnected;
-}
-
-static enum drm_connector_status
-radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-	u32 bios_0_scratch;
-
-	if (!ASIC_IS_DCE4(rdev))
-		return connector_status_unknown;
-
-	if (!ext_encoder)
-		return connector_status_unknown;
-
-	if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
-		return connector_status_unknown;
-
-	/* load detect on the dp bridge */
-	atombios_external_encoder_setup(encoder, ext_encoder,
-					EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
-
-	bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
-
-	DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
-	if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
-		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
-		if (bios_0_scratch & ATOM_S0_CRT2_MASK)
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
-		if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
-			return connector_status_connected;
-	}
-	if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
-		if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
-			return connector_status_connected; /* CTV */
-		else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
-			return connector_status_connected; /* STV */
-	}
-	return connector_status_disconnected;
-}
-
-void
-radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
-{
-	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
-
-	if (ext_encoder)
-		/* ddc_setup on the dp bridge */
-		atombios_external_encoder_setup(encoder, ext_encoder,
-						EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
-
-}
-
-static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
-{
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-
-	if ((radeon_encoder->active_device &
-	     (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
-	    radeon_encoder_is_dp_bridge(encoder)) {
-		struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-		if (dig)
-			dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
-	}
-
-	radeon_atom_output_lock(encoder, true);
-	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-
-	if (connector) {
-		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-
-		/* select the clock/data port if it uses a router */
-		if (radeon_connector->router.cd_valid)
-			radeon_router_select_cd_port(radeon_connector);
-
-		/* turn eDP panel on for mode set */
-		if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
-			atombios_set_edp_panel_power(connector,
-						     ATOM_TRANSMITTER_ACTION_POWER_ON);
-	}
-
-	/* this is needed for the pll/ss setup to work correctly in some cases */
-	atombios_set_encoder_crtc_source(encoder);
-}
-
-static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
-{
-	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
-	radeon_atom_output_lock(encoder, false);
-}
-
-static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_atom_dig *dig;
-
-	/* check for pre-DCE3 cards with shared encoders;
-	 * can't really use the links individually, so don't disable
-	 * the encoder if it's in use by another connector
-	 */
-	if (!ASIC_IS_DCE3(rdev)) {
-		struct drm_encoder *other_encoder;
-		struct radeon_encoder *other_radeon_encoder;
-
-		list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
-			other_radeon_encoder = to_radeon_encoder(other_encoder);
-			if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
-			    drm_helper_encoder_in_use(other_encoder))
-				goto disable_done;
-		}
-	}
-
-	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_DISABLE);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE4(rdev))
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-		else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-		}
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_dvo_setup(encoder, ATOM_DISABLE);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-		atombios_dac_setup(encoder, ATOM_DISABLE);
-		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
-			atombios_tv_setup(encoder, ATOM_DISABLE);
-		break;
-	}
-
-disable_done:
-	if (radeon_encoder_is_digital(encoder)) {
-		if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
-			r600_hdmi_disable(encoder);
-		dig = radeon_encoder->enc_priv;
-		dig->dig_encoder = -1;
-	}
-	radeon_encoder->active_device = 0;
-}
-
-/* these are handled by the primary encoders */
-static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
-{
-
-}
-
-static void radeon_atom_ext_commit(struct drm_encoder *encoder)
-{
-
-}
-
-static void
-radeon_atom_ext_mode_set(struct drm_encoder *encoder,
-			 struct drm_display_mode *mode,
-			 struct drm_display_mode *adjusted_mode)
-{
-
-}
-
-static void radeon_atom_ext_disable(struct drm_encoder *encoder)
-{
-
-}
-
-static void
-radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
-{
-
-}
-
-static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
-				       struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
-{
-	return true;
-}
-
-static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
-	.dpms = radeon_atom_ext_dpms,
-	.mode_fixup = radeon_atom_ext_mode_fixup,
-	.prepare = radeon_atom_ext_prepare,
-	.mode_set = radeon_atom_ext_mode_set,
-	.commit = radeon_atom_ext_commit,
-	.disable = radeon_atom_ext_disable,
-	/* no detect for TMDS/LVDS yet */
-};
-
-static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
-	.dpms = radeon_atom_encoder_dpms,
-	.mode_fixup = radeon_atom_mode_fixup,
-	.prepare = radeon_atom_encoder_prepare,
-	.mode_set = radeon_atom_encoder_mode_set,
-	.commit = radeon_atom_encoder_commit,
-	.disable = radeon_atom_encoder_disable,
-	.detect = radeon_atom_dig_detect,
-};
-
-static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
-	.dpms = radeon_atom_encoder_dpms,
-	.mode_fixup = radeon_atom_mode_fixup,
-	.prepare = radeon_atom_encoder_prepare,
-	.mode_set = radeon_atom_encoder_mode_set,
-	.commit = radeon_atom_encoder_commit,
-	.detect = radeon_atom_dac_detect,
-};
-
-void radeon_enc_destroy(struct drm_encoder *encoder)
-{
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	kfree(radeon_encoder->enc_priv);
-	drm_encoder_cleanup(encoder);
-	kfree(radeon_encoder);
-}
-
-static const struct drm_encoder_funcs radeon_atom_enc_funcs = {
-	.destroy = radeon_enc_destroy,
-};
-
-struct radeon_encoder_atom_dac *
-radeon_atombios_set_dac_info(struct radeon_encoder *radeon_encoder)
-{
-	struct drm_device *dev = radeon_encoder->base.dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder_atom_dac *dac = kzalloc(sizeof(struct radeon_encoder_atom_dac), GFP_KERNEL);
-
-	if (!dac)
-		return NULL;
-
-	dac->tv_std = radeon_atombios_get_tv_info(rdev);
-	return dac;
-}
-
-struct radeon_encoder_atom_dig *
-radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
-{
-	int encoder_enum = (radeon_encoder->encoder_enum & ENUM_ID_MASK) >> ENUM_ID_SHIFT;
-	struct radeon_encoder_atom_dig *dig = kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
-
-	if (!dig)
-		return NULL;
-
-	/* coherent mode by default */
-	dig->coherent_mode = true;
-	dig->dig_encoder = -1;
-
-	if (encoder_enum == 2)
-		dig->linkb = true;
-	else
-		dig->linkb = false;
-
-	return dig;
-}
-
-void
-radeon_add_atom_encoder(struct drm_device *dev,
-			uint32_t encoder_enum,
-			uint32_t supported_device,
-			u16 caps)
-{
-	struct radeon_device *rdev = dev->dev_private;
-	struct drm_encoder *encoder;
-	struct radeon_encoder *radeon_encoder;
-
-	/* see if we already added it */
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		radeon_encoder = to_radeon_encoder(encoder);
-		if (radeon_encoder->encoder_enum == encoder_enum) {
-			radeon_encoder->devices |= supported_device;
-			return;
-		}
-
-	}
-
-	/* add a new one */
-	radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
-	if (!radeon_encoder)
-		return;
-
-	encoder = &radeon_encoder->base;
-	switch (rdev->num_crtc) {
-	case 1:
-		encoder->possible_crtcs = 0x1;
-		break;
-	case 2:
-	default:
-		encoder->possible_crtcs = 0x3;
-		break;
-	case 4:
-		encoder->possible_crtcs = 0xf;
-		break;
-	case 6:
-		encoder->possible_crtcs = 0x3f;
-		break;
-	}
-
-	radeon_encoder->enc_priv = NULL;
-
-	radeon_encoder->encoder_enum = encoder_enum;
-	radeon_encoder->encoder_id = (encoder_enum & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
-	radeon_encoder->devices = supported_device;
-	radeon_encoder->rmx_type = RMX_OFF;
-	radeon_encoder->underscan_type = UNDERSCAN_OFF;
-	radeon_encoder->is_ext_encoder = false;
-	radeon_encoder->caps = caps;
-
-	switch (radeon_encoder->encoder_id) {
-	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
-	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
-	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
-		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-			radeon_encoder->rmx_type = RMX_FULL;
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
-			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
-		} else {
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
-			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
-		}
-		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
-		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
-		radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
-		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
-		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TVDAC);
-		radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
-		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
-		break;
-	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
-	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
-			radeon_encoder->rmx_type = RMX_FULL;
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
-			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
-		} else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
-			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
-		} else {
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
-			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
-		}
-		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
-		break;
-	case ENCODER_OBJECT_ID_SI170B:
-	case ENCODER_OBJECT_ID_CH7303:
-	case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
-	case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
-	case ENCODER_OBJECT_ID_TITFP513:
-	case ENCODER_OBJECT_ID_VT1623:
-	case ENCODER_OBJECT_ID_HDMI_SI1930:
-	case ENCODER_OBJECT_ID_TRAVIS:
-	case ENCODER_OBJECT_ID_NUTMEG:
-		/* these are handled by the primary encoders */
-		radeon_encoder->is_ext_encoder = true;
-		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
-		else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
-		else
-			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
-		drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
-		break;
-	}
-}
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index fdc3a9a..ba7ab79 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -49,27 +49,27 @@
 			      rdev->gart.table_size >> PAGE_SHIFT);
 	}
 #endif
-	rdev->gart.table.ram.ptr = ptr;
-	memset((void *)rdev->gart.table.ram.ptr, 0, rdev->gart.table_size);
+	rdev->gart.ptr = ptr;
+	memset((void *)rdev->gart.ptr, 0, rdev->gart.table_size);
 	return 0;
 }
 
 void radeon_gart_table_ram_free(struct radeon_device *rdev)
 {
-	if (rdev->gart.table.ram.ptr == NULL) {
+	if (rdev->gart.ptr == NULL) {
 		return;
 	}
 #ifdef CONFIG_X86
 	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480 ||
 	    rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
-		set_memory_wb((unsigned long)rdev->gart.table.ram.ptr,
+		set_memory_wb((unsigned long)rdev->gart.ptr,
 			      rdev->gart.table_size >> PAGE_SHIFT);
 	}
 #endif
 	pci_free_consistent(rdev->pdev, rdev->gart.table_size,
-			    (void *)rdev->gart.table.ram.ptr,
+			    (void *)rdev->gart.ptr,
 			    rdev->gart.table_addr);
-	rdev->gart.table.ram.ptr = NULL;
+	rdev->gart.ptr = NULL;
 	rdev->gart.table_addr = 0;
 }
 
@@ -77,10 +77,10 @@
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		r = radeon_bo_create(rdev, rdev->gart.table_size,
 				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
-				     &rdev->gart.table.vram.robj);
+				     &rdev->gart.robj);
 		if (r) {
 			return r;
 		}
@@ -93,38 +93,46 @@
 	uint64_t gpu_addr;
 	int r;
 
-	r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
+	r = radeon_bo_reserve(rdev->gart.robj, false);
 	if (unlikely(r != 0))
 		return r;
-	r = radeon_bo_pin(rdev->gart.table.vram.robj,
+	r = radeon_bo_pin(rdev->gart.robj,
 				RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
 	if (r) {
-		radeon_bo_unreserve(rdev->gart.table.vram.robj);
+		radeon_bo_unreserve(rdev->gart.robj);
 		return r;
 	}
-	r = radeon_bo_kmap(rdev->gart.table.vram.robj,
-				(void **)&rdev->gart.table.vram.ptr);
+	r = radeon_bo_kmap(rdev->gart.robj, &rdev->gart.ptr);
 	if (r)
-		radeon_bo_unpin(rdev->gart.table.vram.robj);
-	radeon_bo_unreserve(rdev->gart.table.vram.robj);
+		radeon_bo_unpin(rdev->gart.robj);
+	radeon_bo_unreserve(rdev->gart.robj);
 	rdev->gart.table_addr = gpu_addr;
 	return r;
 }
 
-void radeon_gart_table_vram_free(struct radeon_device *rdev)
+void radeon_gart_table_vram_unpin(struct radeon_device *rdev)
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		return;
 	}
-	r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
+	r = radeon_bo_reserve(rdev->gart.robj, false);
 	if (likely(r == 0)) {
-		radeon_bo_kunmap(rdev->gart.table.vram.robj);
-		radeon_bo_unpin(rdev->gart.table.vram.robj);
-		radeon_bo_unreserve(rdev->gart.table.vram.robj);
+		radeon_bo_kunmap(rdev->gart.robj);
+		radeon_bo_unpin(rdev->gart.robj);
+		radeon_bo_unreserve(rdev->gart.robj);
+		rdev->gart.ptr = NULL;
 	}
-	radeon_bo_unref(&rdev->gart.table.vram.robj);
+}
+
+void radeon_gart_table_vram_free(struct radeon_device *rdev)
+{
+	if (rdev->gart.robj == NULL) {
+		return;
+	}
+	radeon_gart_table_vram_unpin(rdev);
+	radeon_bo_unref(&rdev->gart.robj);
 }
 
 
@@ -151,12 +159,14 @@
 		if (rdev->gart.pages[p]) {
 			if (!rdev->gart.ttm_alloced[p])
 				pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p],
-				       		PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
+						PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
 			rdev->gart.pages[p] = NULL;
 			rdev->gart.pages_addr[p] = rdev->dummy_page.addr;
 			page_base = rdev->gart.pages_addr[p];
 			for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
-				radeon_gart_set_page(rdev, t, page_base);
+				if (rdev->gart.ptr) {
+					radeon_gart_set_page(rdev, t, page_base);
+				}
 				page_base += RADEON_GPU_PAGE_SIZE;
 			}
 		}
@@ -199,10 +209,12 @@
 			}
 		}
 		rdev->gart.pages[p] = pagelist[i];
-		page_base = rdev->gart.pages_addr[p];
-		for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
-			radeon_gart_set_page(rdev, t, page_base);
-			page_base += RADEON_GPU_PAGE_SIZE;
+		if (rdev->gart.ptr) {
+			page_base = rdev->gart.pages_addr[p];
+			for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
+				radeon_gart_set_page(rdev, t, page_base);
+				page_base += RADEON_GPU_PAGE_SIZE;
+			}
 		}
 	}
 	mb();
@@ -215,6 +227,9 @@
 	int i, j, t;
 	u64 page_base;
 
+	if (!rdev->gart.ptr) {
+		return;
+	}
 	for (i = 0, t = 0; i < rdev->gart.num_cpu_pages; i++) {
 		page_base = rdev->gart.pages_addr[i];
 		for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 02cb7da..7bb1b07 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -23,6 +23,8 @@
  * Authors: Dave Airlie
  *          Alex Deucher
  */
+#include <linux/export.h>
+
 #include "drmP.h"
 #include "radeon_drm.h"
 #include "radeon.h"
@@ -32,7 +34,7 @@
  * radeon_ddc_probe
  *
  */
-bool radeon_ddc_probe(struct radeon_connector *radeon_connector, bool requires_extended_probe)
+bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
 {
 	u8 out = 0x0;
 	u8 buf[8];
@@ -47,15 +49,11 @@
 		{
 			.addr = 0x50,
 			.flags = I2C_M_RD,
-			.len = 1,
+			.len = 8,
 			.buf = buf,
 		}
 	};
 
-	/* Read 8 bytes from i2c for extended probe of EDID header */
-	if (requires_extended_probe)
-		msgs[1].len = 8;
-
 	/* on hw with routers, select right port */
 	if (radeon_connector->router.ddc_valid)
 		radeon_router_select_ddc_port(radeon_connector);
@@ -64,17 +62,15 @@
 	if (ret != 2)
 		/* Couldn't find an accessible DDC on this connector */
 		return false;
-	if (requires_extended_probe) {
-		/* Probe also for valid EDID header
-		 * EDID header starts with:
-		 * 0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00.
-		 * Only the first 6 bytes must be valid as
-		 * drm_edid_block_valid() can fix the last 2 bytes */
-		if (drm_edid_header_is_valid(buf) < 6) {
-			/* Couldn't find an accessible EDID on this
-			 * connector */
-			return false;
-		}
+	/* Probe also for valid EDID header
+	 * EDID header starts with:
+	 * 0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00.
+	 * Only the first 6 bytes must be valid as
+	 * drm_edid_block_valid() can fix the last 2 bytes */
+	if (drm_edid_header_is_valid(buf) < 6) {
+		/* Couldn't find an accessible EDID on this
+		 * connector */
+		return false;
 	}
 	return true;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 9ec830c..8f86aeb 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -67,10 +67,10 @@
 	/* Disable *all* interrupts */
 	rdev->irq.sw_int = false;
 	rdev->irq.gui_idle = false;
-	for (i = 0; i < rdev->num_crtc; i++)
-		rdev->irq.crtc_vblank_int[i] = false;
-	for (i = 0; i < 6; i++) {
+	for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
 		rdev->irq.hpd[i] = false;
+	for (i = 0; i < RADEON_MAX_CRTCS; i++) {
+		rdev->irq.crtc_vblank_int[i] = false;
 		rdev->irq.pflip[i] = false;
 	}
 	radeon_irq_set(rdev);
@@ -99,15 +99,55 @@
 	/* Disable *all* interrupts */
 	rdev->irq.sw_int = false;
 	rdev->irq.gui_idle = false;
-	for (i = 0; i < rdev->num_crtc; i++)
-		rdev->irq.crtc_vblank_int[i] = false;
-	for (i = 0; i < 6; i++) {
+	for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
 		rdev->irq.hpd[i] = false;
+	for (i = 0; i < RADEON_MAX_CRTCS; i++) {
+		rdev->irq.crtc_vblank_int[i] = false;
 		rdev->irq.pflip[i] = false;
 	}
 	radeon_irq_set(rdev);
 }
 
+static bool radeon_msi_ok(struct radeon_device *rdev)
+{
+	/* RV370/RV380 was first asic with MSI support */
+	if (rdev->family < CHIP_RV380)
+		return false;
+
+	/* MSIs don't work on AGP */
+	if (rdev->flags & RADEON_IS_AGP)
+		return false;
+
+	/* force MSI on */
+	if (radeon_msi == 1)
+		return true;
+	else if (radeon_msi == 0)
+		return false;
+
+	/* Quirks */
+	/* HP RS690 only seems to work with MSIs. */
+	if ((rdev->pdev->device == 0x791f) &&
+	    (rdev->pdev->subsystem_vendor == 0x103c) &&
+	    (rdev->pdev->subsystem_device == 0x30c2))
+		return true;
+
+	/* Dell RS690 only seems to work with MSIs. */
+	if ((rdev->pdev->device == 0x791f) &&
+	    (rdev->pdev->subsystem_vendor == 0x1028) &&
+	    (rdev->pdev->subsystem_device == 0x01fd))
+		return true;
+
+	if (rdev->flags & RADEON_IS_IGP) {
+		/* APUs work fine with MSIs */
+		if (rdev->family >= CHIP_PALM)
+			return true;
+		/* lots of IGPs have problems with MSIs */
+		return false;
+	}
+
+	return true;
+}
+
 int radeon_irq_kms_init(struct radeon_device *rdev)
 {
 	int i;
@@ -124,12 +164,8 @@
 	}
 	/* enable msi */
 	rdev->msi_enabled = 0;
-	/* MSIs don't seem to work reliably on all IGP
-	 * chips.  Disable MSI on them for now.
-	 */
-	if ((rdev->family >= CHIP_RV380) &&
-	    ((!(rdev->flags & RADEON_IS_IGP)) || (rdev->family >= CHIP_PALM)) &&
-	    (!(rdev->flags & RADEON_IS_AGP))) {
+
+	if (radeon_msi_ok(rdev)) {
 		int ret = pci_enable_msi(rdev->pdev);
 		if (!ret) {
 			rdev->msi_enabled = 1;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 41a5d48..daadf21 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -991,12 +991,6 @@
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = crtc->dev;
-	struct radeon_device *rdev = dev->dev_private;
-
-	/* adjust pm to upcoming mode change */
-	radeon_pm_compute_clocks(rdev);
-
 	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
 		return false;
 	return true;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index ed0178f..2c2e75e 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -438,9 +438,6 @@
 	struct radeon_i2c_chan *ddc_bus;
 	/* some systems have an hdmi and vga port with a shared ddc line */
 	bool shared_ddc;
-	/* for some Radeon chip families we apply an additional EDID header
-	   check as part of the DDC probe */
-	bool requires_extended_probe;
 	bool use_digital;
 	/* we need to mind the EDID between detect
 	   and get modes due to analog/digital/tvencoder */
@@ -459,6 +456,8 @@
 	struct drm_gem_object *obj;
 };
 
+#define ENCODER_MODE_IS_DP(em) (((em) == ATOM_ENCODER_MODE_DP) || \
+				((em) == ATOM_ENCODER_MODE_DP_MST))
 
 extern enum radeon_tv_std
 radeon_combios_get_tv_info(struct radeon_device *rdev);
@@ -468,8 +467,8 @@
 extern struct drm_connector *
 radeon_get_connector_for_encoder(struct drm_encoder *encoder);
 
-extern bool radeon_encoder_is_dp_bridge(struct drm_encoder *encoder);
-extern bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
+extern u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder);
+extern u16 radeon_connector_encoder_get_dp_bridge_encoder_id(struct drm_connector *connector);
 extern bool radeon_connector_encoder_is_hbr2(struct drm_connector *connector);
 extern bool radeon_connector_is_dp12_capable(struct drm_connector *connector);
 
@@ -489,7 +488,7 @@
 					   int action, uint8_t lane_num,
 					   uint8_t lane_set);
 extern void radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder);
-extern struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder);
+extern struct drm_encoder *radeon_get_external_encoder(struct drm_encoder *encoder);
 extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 				u8 write_byte, u8 *read_byte);
 
@@ -519,8 +518,7 @@
 				u8 val);
 extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
 extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
-extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector,
-			bool requires_extended_probe);
+extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
 extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
 
 extern struct drm_encoder *radeon_best_encoder(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 6fabe89..78a665b 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -53,6 +53,24 @@
 
 #define ACPI_AC_CLASS           "ac_adapter"
 
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+			     enum radeon_pm_state_type ps_type,
+			     int instance)
+{
+	int i;
+	int found_instance = -1;
+
+	for (i = 0; i < rdev->pm.num_power_states; i++) {
+		if (rdev->pm.power_state[i].type == ps_type) {
+			found_instance++;
+			if (found_instance == instance)
+				return i;
+		}
+	}
+	/* return default if no match */
+	return rdev->pm.default_power_state_index;
+}
+
 #ifdef CONFIG_ACPI
 static int radeon_acpi_event(struct notifier_block *nb,
 			     unsigned long val,
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 89a6e1e..06b90c8 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -77,7 +77,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.ram.ptr) {
+	if (rdev->gart.ptr) {
 		WARN(1, "RS400 GART already initialized\n");
 		return 0;
 	}
@@ -212,6 +212,7 @@
 int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
 	uint32_t entry;
+	u32 *gtt = rdev->gart.ptr;
 
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
@@ -221,7 +222,7 @@
 		((upper_32_bits(addr) & 0xff) << 4) |
 		RS400_PTE_WRITEABLE | RS400_PTE_READABLE;
 	entry = cpu_to_le32(entry);
-	rdev->gart.table.ram.ptr[i] = entry;
+	gtt[i] = entry;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 9320dd6..b1053d6 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -62,6 +62,7 @@
 {
 	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id];
 	u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset);
+	int i;
 
 	/* Lock the graphics update lock */
 	tmp |= AVIVO_D1GRPH_UPDATE_LOCK;
@@ -74,7 +75,11 @@
 	       (u32)crtc_base);
 
 	/* Wait for update_pending to go high. */
-	while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING));
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)
+			break;
+		udelay(1);
+	}
 	DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n");
 
 	/* Unlock the lock, so double-buffering can take place inside vblank */
@@ -287,6 +292,7 @@
 		default:
 			break;
 		}
+		radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
 	}
 	if (rdev->irq.installed)
 		rs600_irq_set(rdev);
@@ -413,7 +419,7 @@
 {
 	int r;
 
-	if (rdev->gart.table.vram.robj) {
+	if (rdev->gart.robj) {
 		WARN(1, "RS600 GART already initialized\n");
 		return 0;
 	}
@@ -431,7 +437,7 @@
 	u32 tmp;
 	int r, i;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -494,20 +500,12 @@
 void rs600_gart_disable(struct radeon_device *rdev)
 {
 	u32 tmp;
-	int r;
 
 	/* FIXME: disable out of gart access */
 	WREG32_MC(R_000100_MC_PT0_CNTL, 0);
 	tmp = RREG32_MC(R_000009_MC_CNTL1);
 	WREG32_MC(R_000009_MC_CNTL1, tmp & C_000009_ENABLE_PAGE_TABLES);
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (r == 0) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void rs600_gart_fini(struct radeon_device *rdev)
@@ -525,7 +523,7 @@
 
 int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
-	void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+	void __iomem *ptr = (void *)rdev->gart.ptr;
 
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 87cc1fe..23ae1c6 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -47,6 +47,7 @@
 {
 	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id];
 	u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset);
+	int i;
 
 	/* Lock the graphics update lock */
 	tmp |= AVIVO_D1GRPH_UPDATE_LOCK;
@@ -66,7 +67,11 @@
 	       (u32)crtc_base);
 
 	/* Wait for update_pending to go high. */
-	while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING));
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)
+			break;
+		udelay(1);
+	}
 	DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n");
 
 	/* Unlock the lock, so double-buffering can take place inside vblank */
@@ -124,7 +129,7 @@
 	u32 tmp;
 	int r, i;
 
-	if (rdev->gart.table.vram.robj == NULL) {
+	if (rdev->gart.robj == NULL) {
 		dev_err(rdev->dev, "No VRAM object for PCIE GART.\n");
 		return -EINVAL;
 	}
@@ -171,7 +176,7 @@
 void rv770_pcie_gart_disable(struct radeon_device *rdev)
 {
 	u32 tmp;
-	int i, r;
+	int i;
 
 	/* Disable all tables */
 	for (i = 0; i < 7; i++)
@@ -191,14 +196,7 @@
 	WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
-	if (rdev->gart.table.vram.robj) {
-		r = radeon_bo_reserve(rdev->gart.table.vram.robj, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rdev->gart.table.vram.robj);
-			radeon_bo_unpin(rdev->gart.table.vram.robj);
-			radeon_bo_unreserve(rdev->gart.table.vram.robj);
-		}
-	}
+	radeon_gart_table_vram_unpin(rdev);
 }
 
 void rv770_pcie_gart_fini(struct radeon_device *rdev)
@@ -282,7 +280,7 @@
 		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
 			rdev->mc.vram_end >> 12);
 	}
-	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
 	tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
 	tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
 	WREG32(MC_VM_FB_LOCATION, tmp);
@@ -959,54 +957,6 @@
 
 }
 
-static int rv770_vram_scratch_init(struct radeon_device *rdev)
-{
-	int r;
-	u64 gpu_addr;
-
-	if (rdev->vram_scratch.robj == NULL) {
-		r = radeon_bo_create(rdev, RADEON_GPU_PAGE_SIZE,
-				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
-				     &rdev->vram_scratch.robj);
-		if (r) {
-			return r;
-		}
-	}
-
-	r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
-	if (unlikely(r != 0))
-		return r;
-	r = radeon_bo_pin(rdev->vram_scratch.robj,
-			  RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
-	if (r) {
-		radeon_bo_unreserve(rdev->vram_scratch.robj);
-		return r;
-	}
-	r = radeon_bo_kmap(rdev->vram_scratch.robj,
-				(void **)&rdev->vram_scratch.ptr);
-	if (r)
-		radeon_bo_unpin(rdev->vram_scratch.robj);
-	radeon_bo_unreserve(rdev->vram_scratch.robj);
-
-	return r;
-}
-
-static void rv770_vram_scratch_fini(struct radeon_device *rdev)
-{
-	int r;
-
-	if (rdev->vram_scratch.robj == NULL) {
-		return;
-	}
-	r = radeon_bo_reserve(rdev->vram_scratch.robj, false);
-	if (likely(r == 0)) {
-		radeon_bo_kunmap(rdev->vram_scratch.robj);
-		radeon_bo_unpin(rdev->vram_scratch.robj);
-		radeon_bo_unreserve(rdev->vram_scratch.robj);
-	}
-	radeon_bo_unref(&rdev->vram_scratch.robj);
-}
-
 void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 {
 	u64 size_bf, size_af;
@@ -1106,6 +1056,10 @@
 		}
 	}
 
+	r = r600_vram_scratch_init(rdev);
+	if (r)
+		return r;
+
 	rv770_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		rv770_agp_enable(rdev);
@@ -1114,9 +1068,7 @@
 		if (r)
 			return r;
 	}
-	r = rv770_vram_scratch_init(rdev);
-	if (r)
-		return r;
+
 	rv770_gpu_init(rdev);
 	r = r600_blit_init(rdev);
 	if (r) {
@@ -1316,7 +1268,7 @@
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	rv770_pcie_gart_fini(rdev);
-	rv770_vram_scratch_fini(rdev);
+	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_agp_fini(rdev);
diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c
index 6464490..5468d1c 100644
--- a/drivers/gpu/drm/savage/savage_drv.c
+++ b/drivers/gpu/drm/savage/savage_drv.c
@@ -23,6 +23,8 @@
  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "savage_drm.h"
 #include "savage_drv.h"
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 46d5be6..a9c5716 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "sis_drm.h"
 #include "sis_drv.h"
diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c
index 8bf9881..cda2991 100644
--- a/drivers/gpu/drm/tdfx/tdfx_drv.c
+++ b/drivers/gpu/drm/tdfx/tdfx_drv.c
@@ -30,6 +30,8 @@
  *    Gareth Hughes <gareth@valinux.com>
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "tdfx_drv.h"
 
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 617b646..0bb0f5f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -574,10 +574,16 @@
 		return ret;
 
 	spin_lock(&glob->lru_lock);
+
+	if (unlikely(list_empty(&bo->ddestroy))) {
+		spin_unlock(&glob->lru_lock);
+		return 0;
+	}
+
 	ret = ttm_bo_reserve_locked(bo, interruptible,
 				    no_wait_reserve, false, 0);
 
-	if (unlikely(ret != 0) || list_empty(&bo->ddestroy)) {
+	if (unlikely(ret != 0)) {
 		spin_unlock(&glob->lru_lock);
 		return ret;
 	}
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 58c271e..f9cc548 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -35,6 +35,7 @@
 #include <linux/file.h>
 #include <linux/swap.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "drm_cache.h"
 #include "drm_mem_util.h"
 #include "ttm/ttm_module.h"
diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c
index 920a552..a83e86d 100644
--- a/drivers/gpu/drm/via/via_drv.c
+++ b/drivers/gpu/drm/via/via_drv.c
@@ -22,6 +22,8 @@
  * DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/module.h>
+
 #include "drmP.h"
 #include "via_drm.h"
 #include "via_drv.h"
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 13afddc..dff8fc7 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -24,6 +24,7 @@
  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  **************************************************************************/
+#include <linux/module.h>
 
 #include "drmP.h"
 #include "vmwgfx_drv.h"
@@ -103,6 +104,9 @@
 #define DRM_IOCTL_VMW_PRESENT_READBACK				\
 	DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_PRESENT_READBACK,	\
 		 struct drm_vmw_present_readback_arg)
+#define DRM_IOCTL_VMW_UPDATE_LAYOUT				\
+	DRM_IOW(DRM_COMMAND_BASE + DRM_VMW_UPDATE_LAYOUT,	\
+		 struct drm_vmw_update_layout_arg)
 
 /**
  * The core DRM version of this macro doesn't account for
@@ -165,6 +169,9 @@
 	VMW_IOCTL_DEF(VMW_PRESENT_READBACK,
 		      vmw_present_readback_ioctl,
 		      DRM_MASTER | DRM_AUTH | DRM_UNLOCKED),
+	VMW_IOCTL_DEF(VMW_UPDATE_LAYOUT,
+		      vmw_kms_update_layout_ioctl,
+		      DRM_MASTER | DRM_UNLOCKED),
 };
 
 static struct pci_device_id vmw_pci_id_list[] = {
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 30589d0..8cca91a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -40,9 +40,9 @@
 #include "ttm/ttm_module.h"
 #include "vmwgfx_fence.h"
 
-#define VMWGFX_DRIVER_DATE "20111008"
+#define VMWGFX_DRIVER_DATE "20111025"
 #define VMWGFX_DRIVER_MAJOR 2
-#define VMWGFX_DRIVER_MINOR 2
+#define VMWGFX_DRIVER_MINOR 3
 #define VMWGFX_DRIVER_PATCHLEVEL 0
 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000
 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
@@ -633,6 +633,8 @@
 		     struct drm_vmw_fence_rep __user *user_fence_rep,
 		     struct drm_vmw_rect *clips,
 		     uint32_t num_clips);
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
 
 /**
  * Overlay control - vmwgfx_overlay.c
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 070797b..34e51a1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -26,6 +26,8 @@
  *
  **************************************************************************/
 
+#include <linux/export.h>
+
 #include "drmP.h"
 #include "vmwgfx_drv.h"
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 8b14dfd..37d4054 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -105,12 +105,17 @@
 	struct vmw_dma_buffer *dmabuf = NULL;
 	int ret;
 
+	/* A lot of the code assumes this */
+	if (handle && (width != 64 || height != 64))
+		return -EINVAL;
+
 	if (handle) {
 		ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
 						     handle, &surface);
 		if (!ret) {
 			if (!surface->snooper.image) {
 				DRM_ERROR("surface not suitable for cursor\n");
+				vmw_surface_unreference(&surface);
 				return -EINVAL;
 			}
 		} else {
@@ -176,7 +181,9 @@
 		return 0;
 	}
 
-	vmw_cursor_update_position(dev_priv, true, du->cursor_x, du->cursor_y);
+	vmw_cursor_update_position(dev_priv, true,
+				   du->cursor_x + du->hotspot_x,
+				   du->cursor_y + du->hotspot_y);
 
 	return 0;
 }
@@ -191,7 +198,8 @@
 	du->cursor_y = y + crtc->y;
 
 	vmw_cursor_update_position(dev_priv, shown,
-				   du->cursor_x, du->cursor_y);
+				   du->cursor_x + du->hotspot_x,
+				   du->cursor_y + du->hotspot_y);
 
 	return 0;
 }
@@ -212,7 +220,7 @@
 		SVGA3dCmdHeader header;
 		SVGA3dCmdSurfaceDMA dma;
 	} *cmd;
-	int ret;
+	int i, ret;
 
 	cmd = container_of(header, struct vmw_dma_cmd, header);
 
@@ -234,16 +242,19 @@
 	box_count = (cmd->header.size - sizeof(SVGA3dCmdSurfaceDMA)) /
 			sizeof(SVGA3dCopyBox);
 
-	if (cmd->dma.guest.pitch != (64 * 4) ||
-	    cmd->dma.guest.ptr.offset % PAGE_SIZE ||
+	if (cmd->dma.guest.ptr.offset % PAGE_SIZE ||
 	    box->x != 0    || box->y != 0    || box->z != 0    ||
 	    box->srcx != 0 || box->srcy != 0 || box->srcz != 0 ||
-	    box->w != 64   || box->h != 64   || box->d != 1    ||
-	    box_count != 1) {
+	    box->d != 1    || box_count != 1) {
 		/* TODO handle none page aligned offsets */
-		/* TODO handle partial uploads and pitch != 256 */
-		/* TODO handle more then one copy (size != 64) */
-		DRM_ERROR("lazy programmer, can't handle weird stuff\n");
+		/* TODO handle more dst & src != 0 */
+		/* TODO handle more then one copy */
+		DRM_ERROR("Cant snoop dma request for cursor!\n");
+		DRM_ERROR("(%u, %u, %u) (%u, %u, %u) (%ux%ux%u) %u %u\n",
+			  box->srcx, box->srcy, box->srcz,
+			  box->x, box->y, box->z,
+			  box->w, box->h, box->d, box_count,
+			  cmd->dma.guest.ptr.offset);
 		return;
 	}
 
@@ -262,7 +273,16 @@
 
 	virtual = ttm_kmap_obj_virtual(&map, &dummy);
 
-	memcpy(srf->snooper.image, virtual, 64*64*4);
+	if (box->w == 64 && cmd->dma.guest.pitch == 64*4) {
+		memcpy(srf->snooper.image, virtual, 64*64*4);
+	} else {
+		/* Image is unsigned pointer. */
+		for (i = 0; i < box->h; i++)
+			memcpy(srf->snooper.image + i * 64,
+			       virtual + i * cmd->dma.guest.pitch,
+			       box->w * 4);
+	}
+
 	srf->snooper.age++;
 
 	/* we can't call this function from this function since execbuf has
@@ -394,8 +414,9 @@
 	top = clips->y1;
 	bottom = clips->y2;
 
-	clips_ptr = clips;
-	for (i = 1; i < num_clips; i++, clips_ptr += inc) {
+	/* skip the first clip rect */
+	for (i = 1, clips_ptr = clips + inc;
+	     i < num_clips; i++, clips_ptr += inc) {
 		left = min_t(int, left, (int)clips_ptr->x1);
 		right = max_t(int, right, (int)clips_ptr->x2);
 		top = min_t(int, top, (int)clips_ptr->y1);
@@ -994,7 +1015,7 @@
 	required_size = mode_cmd->pitch * mode_cmd->height;
 	if (unlikely(required_size > (u64) dev_priv->vram_size)) {
 		DRM_ERROR("VRAM size is too small for requested mode.\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	/*
@@ -1307,7 +1328,10 @@
 	 * drm_encoder_cleanup which takes the lock we deadlock.
 	 */
 	drm_mode_config_cleanup(dev_priv->dev);
-	vmw_kms_close_legacy_display_system(dev_priv);
+	if (dev_priv->sou_priv)
+		vmw_kms_close_screen_object_display(dev_priv);
+	else
+		vmw_kms_close_legacy_display_system(dev_priv);
 	return 0;
 }
 
@@ -1517,6 +1541,8 @@
 			du->pref_width = rects[du->unit].w;
 			du->pref_height = rects[du->unit].h;
 			du->pref_active = true;
+			du->gui_x = rects[du->unit].x;
+			du->gui_y = rects[du->unit].y;
 		} else {
 			du->pref_width = 800;
 			du->pref_height = 600;
@@ -1572,12 +1598,14 @@
 	uint32_t num_displays;
 	struct drm_device *dev = connector->dev;
 	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct vmw_display_unit *du = vmw_connector_to_du(connector);
 
 	mutex_lock(&dev_priv->hw_mutex);
 	num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS);
 	mutex_unlock(&dev_priv->hw_mutex);
 
-	return ((vmw_connector_to_du(connector)->unit < num_displays) ?
+	return ((vmw_connector_to_du(connector)->unit < num_displays &&
+		 du->pref_active) ?
 		connector_status_connected : connector_status_disconnected);
 }
 
@@ -1658,6 +1686,28 @@
 	{ DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) },
 };
 
+/**
+ * vmw_guess_mode_timing - Provide fake timings for a
+ * 60Hz vrefresh mode.
+ *
+ * @mode - Pointer to a struct drm_display_mode with hdisplay and vdisplay
+ * members filled in.
+ */
+static void vmw_guess_mode_timing(struct drm_display_mode *mode)
+{
+	mode->hsync_start = mode->hdisplay + 50;
+	mode->hsync_end = mode->hsync_start + 50;
+	mode->htotal = mode->hsync_end + 50;
+
+	mode->vsync_start = mode->vdisplay + 50;
+	mode->vsync_end = mode->vsync_start + 50;
+	mode->vtotal = mode->vsync_end + 50;
+
+	mode->clock = (u32)mode->htotal * (u32)mode->vtotal / 100 * 6;
+	mode->vrefresh = drm_mode_vrefresh(mode);
+}
+
+
 int vmw_du_connector_fill_modes(struct drm_connector *connector,
 				uint32_t max_width, uint32_t max_height)
 {
@@ -1680,18 +1730,23 @@
 			return 0;
 		mode->hdisplay = du->pref_width;
 		mode->vdisplay = du->pref_height;
-		mode->vrefresh = drm_mode_vrefresh(mode);
+		vmw_guess_mode_timing(mode);
+
 		if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
 					       mode->vdisplay)) {
 			drm_mode_probed_add(connector, mode);
-
-			if (du->pref_mode) {
-				list_del_init(&du->pref_mode->head);
-				drm_mode_destroy(dev, du->pref_mode);
-			}
-
-			du->pref_mode = mode;
+		} else {
+			drm_mode_destroy(dev, mode);
+			mode = NULL;
 		}
+
+		if (du->pref_mode) {
+			list_del_init(&du->pref_mode->head);
+			drm_mode_destroy(dev, du->pref_mode);
+		}
+
+		/* mode might be null here, this is intended */
+		du->pref_mode = mode;
 	}
 
 	for (i = 0; vmw_kms_connector_builtin[i].type != 0; i++) {
@@ -1712,6 +1767,10 @@
 		drm_mode_probed_add(connector, mode);
 	}
 
+	/* Move the prefered mode first, help apps pick the right mode. */
+	if (du->pref_mode)
+		list_move(&du->pref_mode->head, &connector->probed_modes);
+
 	drm_mode_connector_list_update(connector);
 
 	return 1;
@@ -1723,3 +1782,64 @@
 {
 	return 0;
 }
+
+
+int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct drm_vmw_update_layout_arg *arg =
+		(struct drm_vmw_update_layout_arg *)data;
+	struct vmw_master *vmaster = vmw_master(file_priv->master);
+	void __user *user_rects;
+	struct drm_vmw_rect *rects;
+	unsigned rects_size;
+	int ret;
+	int i;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+
+	ret = ttm_read_lock(&vmaster->lock, true);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (!arg->num_outputs) {
+		struct drm_vmw_rect def_rect = {0, 0, 800, 600};
+		vmw_du_update_layout(dev_priv, 1, &def_rect);
+		goto out_unlock;
+	}
+
+	rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect);
+	rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect),
+			GFP_KERNEL);
+	if (unlikely(!rects)) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	user_rects = (void __user *)(unsigned long)arg->rects;
+	ret = copy_from_user(rects, user_rects, rects_size);
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("Failed to get rects.\n");
+		ret = -EFAULT;
+		goto out_free;
+	}
+
+	for (i = 0; i < arg->num_outputs; ++i) {
+		if (rects[i].x < 0 ||
+		    rects[i].y < 0 ||
+		    rects[i].x + rects[i].w > mode_config->max_width ||
+		    rects[i].y + rects[i].h > mode_config->max_height) {
+			DRM_ERROR("Invalid GUI layout.\n");
+			ret = -EINVAL;
+			goto out_free;
+		}
+	}
+
+	vmw_du_update_layout(dev_priv, arg->num_outputs, rects);
+
+out_free:
+	kfree(rects);
+out_unlock:
+	ttm_read_unlock(&vmaster->lock);
+	return ret;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index db0b901..af8e6e5 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -96,6 +96,13 @@
 	unsigned pref_height;
 	bool pref_active;
 	struct drm_display_mode *pref_mode;
+
+	/*
+	 * Gui positioning
+	 */
+	int gui_x;
+	int gui_y;
+	bool is_implicit;
 };
 
 #define vmw_crtc_to_du(x) \
@@ -126,8 +133,7 @@
 int vmw_du_connector_set_property(struct drm_connector *connector,
 				  struct drm_property *property,
 				  uint64_t val);
-int vmw_du_update_layout(struct vmw_private *dev_priv, unsigned num,
-			 struct drm_vmw_rect *rects);
+
 
 /*
  * Legacy display unit functions - vmwgfx_ldu.c
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 92f56bc..90c5e39 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -337,13 +337,14 @@
 	ldu->base.pref_width = 800;
 	ldu->base.pref_height = 600;
 	ldu->base.pref_mode = NULL;
+	ldu->base.is_implicit = true;
 
 	drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
-			   DRM_MODE_CONNECTOR_LVDS);
+			   DRM_MODE_CONNECTOR_VIRTUAL);
 	connector->status = vmw_du_connector_detect(connector, true);
 
 	drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
-			 DRM_MODE_ENCODER_LVDS);
+			 DRM_MODE_ENCODER_VIRTUAL);
 	drm_mode_connector_attach_encoder(connector, encoder);
 	encoder->possible_crtcs = (1 << unit);
 	encoder->possible_clones = 0;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
index 477b2a9..4defdcf 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
@@ -36,12 +36,9 @@
 	container_of(x, struct vmw_screen_object_unit, base.connector)
 
 struct vmw_screen_object_display {
-	struct list_head active;
+	unsigned num_implicit;
 
-	unsigned num_active;
-	unsigned last_num_active;
-
-	struct vmw_framebuffer *fb;
+	struct vmw_framebuffer *implicit_fb;
 };
 
 /**
@@ -54,13 +51,11 @@
 	struct vmw_dma_buffer *buffer; /**< Backing store buffer */
 
 	bool defined;
-
-	struct list_head active;
+	bool active_implicit;
 };
 
 static void vmw_sou_destroy(struct vmw_screen_object_unit *sou)
 {
-	list_del_init(&sou->active);
 	vmw_display_unit_cleanup(&sou->base);
 	kfree(sou);
 }
@@ -75,58 +70,31 @@
 	vmw_sou_destroy(vmw_crtc_to_sou(crtc));
 }
 
-static int vmw_sou_del_active(struct vmw_private *vmw_priv,
+static void vmw_sou_del_active(struct vmw_private *vmw_priv,
 			      struct vmw_screen_object_unit *sou)
 {
 	struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
-	if (list_empty(&sou->active))
-		return 0;
 
-	/* Must init otherwise list_empty(&sou->active) will not work. */
-	list_del_init(&sou->active);
-	if (--(ld->num_active) == 0) {
-		BUG_ON(!ld->fb);
-		if (ld->fb->unpin)
-			ld->fb->unpin(ld->fb);
-		ld->fb = NULL;
+	if (sou->active_implicit) {
+		if (--(ld->num_implicit) == 0)
+			ld->implicit_fb = NULL;
+		sou->active_implicit = false;
 	}
-
-	return 0;
 }
 
-static int vmw_sou_add_active(struct vmw_private *vmw_priv,
+static void vmw_sou_add_active(struct vmw_private *vmw_priv,
 			      struct vmw_screen_object_unit *sou,
 			      struct vmw_framebuffer *vfb)
 {
 	struct vmw_screen_object_display *ld = vmw_priv->sou_priv;
-	struct vmw_screen_object_unit *entry;
-	struct list_head *at;
 
-	BUG_ON(!ld->num_active && ld->fb);
-	if (vfb != ld->fb) {
-		if (ld->fb && ld->fb->unpin)
-			ld->fb->unpin(ld->fb);
-		if (vfb->pin)
-			vfb->pin(vfb);
-		ld->fb = vfb;
+	BUG_ON(!ld->num_implicit && ld->implicit_fb);
+
+	if (!sou->active_implicit && sou->base.is_implicit) {
+		ld->implicit_fb = vfb;
+		sou->active_implicit = true;
+		ld->num_implicit++;
 	}
-
-	if (!list_empty(&sou->active))
-		return 0;
-
-	at = &ld->active;
-	list_for_each_entry(entry, &ld->active, active) {
-		if (entry->base.unit > sou->base.unit)
-			break;
-
-		at = &entry->active;
-	}
-
-	list_add(&sou->active, at);
-
-	ld->num_active++;
-
-	return 0;
 }
 
 /**
@@ -164,8 +132,13 @@
 		(sou->base.unit == 0 ? SVGA_SCREEN_IS_PRIMARY : 0);
 	cmd->obj.size.width = mode->hdisplay;
 	cmd->obj.size.height = mode->vdisplay;
-	cmd->obj.root.x = x;
-	cmd->obj.root.y = y;
+	if (sou->base.is_implicit) {
+		cmd->obj.root.x = x;
+		cmd->obj.root.y = y;
+	} else {
+		cmd->obj.root.x = sou->base.gui_x;
+		cmd->obj.root.y = sou->base.gui_y;
+	}
 
 	/* Ok to assume that buffer is pinned in vram */
 	vmw_bo_get_guest_ptr(&sou->buffer->base, &cmd->obj.backingStore.ptr);
@@ -312,10 +285,11 @@
 	}
 
 	/* sou only supports one fb active at the time */
-	if (dev_priv->sou_priv->fb && vfb &&
-	    !(dev_priv->sou_priv->num_active == 1 &&
-	      !list_empty(&sou->active)) &&
-	    dev_priv->sou_priv->fb != vfb) {
+	if (sou->base.is_implicit &&
+	    dev_priv->sou_priv->implicit_fb && vfb &&
+	    !(dev_priv->sou_priv->num_implicit == 1 &&
+	      sou->active_implicit) &&
+	    dev_priv->sou_priv->implicit_fb != vfb) {
 		DRM_ERROR("Multiple framebuffers not supported\n");
 		return -EINVAL;
 	}
@@ -471,19 +445,20 @@
 	encoder = &sou->base.encoder;
 	connector = &sou->base.connector;
 
-	INIT_LIST_HEAD(&sou->active);
+	sou->active_implicit = false;
 
 	sou->base.pref_active = (unit == 0);
 	sou->base.pref_width = 800;
 	sou->base.pref_height = 600;
 	sou->base.pref_mode = NULL;
+	sou->base.is_implicit = true;
 
 	drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
-			   DRM_MODE_CONNECTOR_LVDS);
+			   DRM_MODE_CONNECTOR_VIRTUAL);
 	connector->status = vmw_du_connector_detect(connector, true);
 
 	drm_encoder_init(dev, encoder, &vmw_screen_object_encoder_funcs,
-			 DRM_MODE_ENCODER_LVDS);
+			 DRM_MODE_ENCODER_VIRTUAL);
 	drm_mode_connector_attach_encoder(connector, encoder);
 	encoder->possible_crtcs = (1 << unit);
 	encoder->possible_clones = 0;
@@ -520,10 +495,8 @@
 	if (unlikely(!dev_priv->sou_priv))
 		goto err_no_mem;
 
-	INIT_LIST_HEAD(&dev_priv->sou_priv->active);
-	dev_priv->sou_priv->num_active = 0;
-	dev_priv->sou_priv->last_num_active = 0;
-	dev_priv->sou_priv->fb = NULL;
+	dev_priv->sou_priv->num_implicit = 0;
+	dev_priv->sou_priv->implicit_fb = NULL;
 
 	ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
 	if (unlikely(ret != 0))
@@ -558,9 +531,6 @@
 
 	drm_vblank_cleanup(dev);
 
-	if (!list_empty(&dev_priv->sou_priv->active))
-		DRM_ERROR("Still have active outputs when unloading driver");
-
 	kfree(dev_priv->sou_priv);
 
 	return 0;
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index c72f1c0..111d956 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -465,31 +465,29 @@
 	while (new_bus) {
 		new_bridge = new_bus->self;
 
-		if (new_bridge) {
-			/* go through list of devices already registered */
-			list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
-				bus = same_bridge_vgadev->pdev->bus;
+		/* go through list of devices already registered */
+		list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
+			bus = same_bridge_vgadev->pdev->bus;
+			bridge = bus->self;
+
+			/* see if the share a bridge with this device */
+			if (new_bridge == bridge) {
+				/* if their direct parent bridge is the same
+				   as any bridge of this device then it can't be used
+				   for that device */
+				same_bridge_vgadev->bridge_has_one_vga = false;
+			}
+
+			/* now iterate the previous devices bridge hierarchy */
+			/* if the new devices parent bridge is in the other devices
+			   hierarchy then we can't use it to control this device */
+			while (bus) {
 				bridge = bus->self;
-
-				/* see if the share a bridge with this device */
-				if (new_bridge == bridge) {
-					/* if their direct parent bridge is the same
-					   as any bridge of this device then it can't be used
-					   for that device */
-					same_bridge_vgadev->bridge_has_one_vga = false;
+				if (bridge) {
+					if (bridge == vgadev->pdev->bus->self)
+						vgadev->bridge_has_one_vga = false;
 				}
-
-				/* now iterate the previous devices bridge hierarchy */
-				/* if the new devices parent bridge is in the other devices
-				   hierarchy then we can't use it to control this device */
-				while (bus) {
-					bridge = bus->self;
-					if (bridge) {
-						if (bridge == vgadev->pdev->bus->self)
-							vgadev->bridge_has_one_vga = false;
-					}
-					bus = bus->parent;
-				}
+				bus = bus->parent;
 			}
 		}
 		new_bus = new_bus->parent;
@@ -993,14 +991,20 @@
 				uc = &priv->cards[i];
 		}
 
-		if (!uc)
-			return -EINVAL;
+		if (!uc) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
-		if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0)
-			return -EINVAL;
+		if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
-		if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0)
-			return -EINVAL;
+		if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
 		vga_put(pdev, io_state);
 
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7a0c6f9..a421abd 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -31,6 +31,11 @@
 
 	  If unsure, say Y.
 
+config HID_BATTERY_STRENGTH
+	bool
+	depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
+	default y
+
 config HIDRAW
 	bool "/dev/hidraw raw HID device support"
 	depends on HID
@@ -335,6 +340,7 @@
 	  Say Y here if you have one of the following devices:
 	  - 3M PCT touch screens
 	  - ActionStar dual touch panels
+	  - Atmel panels
 	  - Cando dual touch panels
 	  - Chunghwa panels
 	  - CVTouch panels
@@ -349,12 +355,15 @@
 	  - Lumio CrystalTouch panels
 	  - MosArt dual-touch panels
 	  - PenMount dual touch panels
+	  - PixArt optical touch screen
 	  - Pixcir dual touch panels
+	  - Quanta panels
 	  - eGalax dual-touch panels, including the Joojoo and Wetab tablets
 	  - Stantum multitouch panels
 	  - Touch International Panels
 	  - Unitec Panels
 	  - XAT optical touch panels
+	  - Xiroku optical touch panels
 
 	  If unsure, say N.
 
@@ -466,12 +475,6 @@
 	Support for Primax devices that are not fully compliant with the
 	HID standard.
 
-config HID_QUANTA
-	tristate "Quanta Optical Touch panels"
-	depends on USB_HID
-	---help---
-	Support for Quanta Optical Touch dual-touch panels.
-
 config HID_ROCCAT
 	tristate "Roccat special event support"
 	depends on USB_HID
@@ -492,6 +495,13 @@
 	---help---
 	Support for Roccat Arvo keyboard.
 
+config HID_ROCCAT_ISKU
+	tristate "Roccat Isku keyboard support"
+	depends on USB_HID
+	depends on HID_ROCCAT
+	---help---
+	Support for Roccat Isku keyboard.
+
 config HID_ROCCAT_KONE
 	tristate "Roccat Kone Mouse support"
 	depends on USB_HID
@@ -560,6 +570,12 @@
 	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
+config HID_HYPERV_MOUSE
+	tristate "Microsoft Hyper-V mouse driver"
+	depends on HYPERV
+	---help---
+	Select this option to enable the Hyper-V mouse driver.
+
 config HID_SMARTJOYPLUS
 	tristate "SmartJoy PLUS PS2/USB adapter support"
 	depends on USB_HID
@@ -620,6 +636,7 @@
 	depends on BT_HIDP
 	depends on LEDS_CLASS
 	select POWER_SUPPLY
+	select INPUT_FF_MEMLESS
 	---help---
 	Support for the Nintendo Wii Remote bluetooth device.
 
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 15c1a84..8aefdc9 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -46,6 +46,7 @@
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtekff.o
+obj-$(CONFIG_HID_HYPERV_MOUSE)	+= hid-hyperv.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
 obj-$(CONFIG_HID_KEYTOUCH)	+= hid-keytouch.o
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
@@ -59,7 +60,6 @@
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
 obj-$(CONFIG_HID_PRODIKEYS)	+= hid-prodikeys.o
-obj-$(CONFIG_HID_QUANTA)	+= hid-quanta.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_PICOLCD)	+= hid-picolcd.o
@@ -67,6 +67,7 @@
 obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o
 obj-$(CONFIG_HID_ROCCAT_COMMON)	+= hid-roccat-common.o
 obj-$(CONFIG_HID_ROCCAT_ARVO)	+= hid-roccat-arvo.o
+obj-$(CONFIG_HID_ROCCAT_ISKU)	+= hid-roccat-isku.o
 obj-$(CONFIG_HID_ROCCAT_KONE)	+= hid-roccat-kone.o
 obj-$(CONFIG_HID_ROCCAT_KONEPLUS)	+= hid-roccat-koneplus.o
 obj-$(CONFIG_HID_ROCCAT_KOVAPLUS)	+= hid-roccat-kovaplus.o
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 8cdb4b4..299d238 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -183,9 +183,6 @@
 		if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
 				hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
 			table = macbookair_fn_keys;
-		else if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI &&
-				hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING6_JIS)
-			table = macbookair_fn_keys;
 		else if (hid->product < 0x21d || hid->product >= 0x300)
 			table = powerbook_fn_keys;
 		else
diff --git a/drivers/hid/hid-axff.c b/drivers/hid/hid-axff.c
index 3bdb450..5be858d 100644
--- a/drivers/hid/hid-axff.c
+++ b/drivers/hid/hid-axff.c
@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
+#include <linux/module.h>
 
 #include "hid-ids.h"
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 848a56c..b88ae11 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -90,7 +90,7 @@
 	struct hid_field *field;
 
 	if (report->maxfield == HID_MAX_FIELDS) {
-		dbg_hid("too many fields in report\n");
+		hid_err(report->device, "too many fields in report\n");
 		return NULL;
 	}
 
@@ -121,7 +121,7 @@
 	usage = parser->local.usage[0];
 
 	if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) {
-		dbg_hid("collection stack overflow\n");
+		hid_err(parser->device, "collection stack overflow\n");
 		return -1;
 	}
 
@@ -129,7 +129,7 @@
 		collection = kmalloc(sizeof(struct hid_collection) *
 				parser->device->collection_size * 2, GFP_KERNEL);
 		if (collection == NULL) {
-			dbg_hid("failed to reallocate collection array\n");
+			hid_err(parser->device, "failed to reallocate collection array\n");
 			return -1;
 		}
 		memcpy(collection, parser->device->collection,
@@ -165,7 +165,7 @@
 static int close_collection(struct hid_parser *parser)
 {
 	if (!parser->collection_stack_ptr) {
-		dbg_hid("collection stack underflow\n");
+		hid_err(parser->device, "collection stack underflow\n");
 		return -1;
 	}
 	parser->collection_stack_ptr--;
@@ -197,7 +197,7 @@
 static int hid_add_usage(struct hid_parser *parser, unsigned usage)
 {
 	if (parser->local.usage_index >= HID_MAX_USAGES) {
-		dbg_hid("usage index exceeded\n");
+		hid_err(parser->device, "usage index exceeded\n");
 		return -1;
 	}
 	parser->local.usage[parser->local.usage_index] = usage;
@@ -222,12 +222,13 @@
 
 	report = hid_register_report(parser->device, report_type, parser->global.report_id);
 	if (!report) {
-		dbg_hid("hid_register_report failed\n");
+		hid_err(parser->device, "hid_register_report failed\n");
 		return -1;
 	}
 
 	if (parser->global.logical_maximum < parser->global.logical_minimum) {
-		dbg_hid("logical range invalid %d %d\n", parser->global.logical_minimum, parser->global.logical_maximum);
+		hid_err(parser->device, "logical range invalid %d %d\n",
+				parser->global.logical_minimum, parser->global.logical_maximum);
 		return -1;
 	}
 
@@ -307,7 +308,7 @@
 	case HID_GLOBAL_ITEM_TAG_PUSH:
 
 		if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
-			dbg_hid("global environment stack overflow\n");
+			hid_err(parser->device, "global environment stack overflow\n");
 			return -1;
 		}
 
@@ -318,7 +319,7 @@
 	case HID_GLOBAL_ITEM_TAG_POP:
 
 		if (!parser->global_stack_ptr) {
-			dbg_hid("global environment stack underflow\n");
+			hid_err(parser->device, "global environment stack underflow\n");
 			return -1;
 		}
 
@@ -362,8 +363,8 @@
 
 	case HID_GLOBAL_ITEM_TAG_REPORT_SIZE:
 		parser->global.report_size = item_udata(item);
-		if (parser->global.report_size > 32) {
-			dbg_hid("invalid report_size %d\n",
+		if (parser->global.report_size > 96) {
+			hid_err(parser->device, "invalid report_size %d\n",
 					parser->global.report_size);
 			return -1;
 		}
@@ -372,7 +373,7 @@
 	case HID_GLOBAL_ITEM_TAG_REPORT_COUNT:
 		parser->global.report_count = item_udata(item);
 		if (parser->global.report_count > HID_MAX_USAGES) {
-			dbg_hid("invalid report_count %d\n",
+			hid_err(parser->device, "invalid report_count %d\n",
 					parser->global.report_count);
 			return -1;
 		}
@@ -381,13 +382,13 @@
 	case HID_GLOBAL_ITEM_TAG_REPORT_ID:
 		parser->global.report_id = item_udata(item);
 		if (parser->global.report_id == 0) {
-			dbg_hid("report_id 0 is invalid\n");
+			hid_err(parser->device, "report_id 0 is invalid\n");
 			return -1;
 		}
 		return 0;
 
 	default:
-		dbg_hid("unknown global tag 0x%x\n", item->tag);
+		hid_err(parser->device, "unknown global tag 0x%x\n", item->tag);
 		return -1;
 	}
 }
@@ -414,14 +415,14 @@
 			 * items and the first delimiter set.
 			 */
 			if (parser->local.delimiter_depth != 0) {
-				dbg_hid("nested delimiters\n");
+				hid_err(parser->device, "nested delimiters\n");
 				return -1;
 			}
 			parser->local.delimiter_depth++;
 			parser->local.delimiter_branch++;
 		} else {
 			if (parser->local.delimiter_depth < 1) {
-				dbg_hid("bogus close delimiter\n");
+				hid_err(parser->device, "bogus close delimiter\n");
 				return -1;
 			}
 			parser->local.delimiter_depth--;
@@ -506,7 +507,7 @@
 		ret = hid_add_field(parser, HID_FEATURE_REPORT, data);
 		break;
 	default:
-		dbg_hid("unknown main item tag 0x%x\n", item->tag);
+		hid_err(parser->device, "unknown main item tag 0x%x\n", item->tag);
 		ret = 0;
 	}
 
@@ -678,12 +679,12 @@
 	while ((start = fetch_item(start, end, &item)) != NULL) {
 
 		if (item.format != HID_ITEM_FORMAT_SHORT) {
-			dbg_hid("unexpected long global item\n");
+			hid_err(device, "unexpected long global item\n");
 			goto err;
 		}
 
 		if (dispatch_type[item.type](parser, &item)) {
-			dbg_hid("item %u %u %u %u parsing failed\n",
+			hid_err(device, "item %u %u %u %u parsing failed\n",
 				item.format, (unsigned)item.size,
 				(unsigned)item.type, (unsigned)item.tag);
 			goto err;
@@ -691,11 +692,11 @@
 
 		if (start == end) {
 			if (parser->collection_stack_ptr) {
-				dbg_hid("unbalanced collection at end of report description\n");
+				hid_err(device, "unbalanced collection at end of report description\n");
 				goto err;
 			}
 			if (parser->local.delimiter_depth) {
-				dbg_hid("unbalanced delimiter at end of report description\n");
+				hid_err(device, "unbalanced delimiter at end of report description\n");
 				goto err;
 			}
 			vfree(parser);
@@ -703,7 +704,7 @@
 		}
 	}
 
-	dbg_hid("item fetching failed at offset %d\n", (int)(end - start));
+	hid_err(device, "item fetching failed at offset %d\n", (int)(end - start));
 err:
 	vfree(parser);
 	return ret;
@@ -873,7 +874,7 @@
 		ret = hdrv->event(hid, field, usage, value);
 		if (ret != 0) {
 			if (ret < 0)
-				dbg_hid("%s's event failed with %d\n",
+				hid_err(hid, "%s's event failed with %d\n",
 						hdrv->name, ret);
 			return;
 		}
@@ -995,12 +996,13 @@
 	hid_dump_input(field->report->device, field->usage + offset, value);
 
 	if (offset >= field->report_count) {
-		dbg_hid("offset (%d) exceeds report_count (%d)\n", offset, field->report_count);
+		hid_err(field->report->device, "offset (%d) exceeds report_count (%d)\n",
+				offset, field->report_count);
 		return -1;
 	}
 	if (field->logical_minimum < 0) {
 		if (value != snto32(s32ton(value, size), size)) {
-			dbg_hid("value %d is out of range\n", value);
+			hid_err(field->report->device, "value %d is out of range\n", value);
 			return -1;
 		}
 	}
@@ -1404,11 +1406,13 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
@@ -1423,6 +1427,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT, USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
  	{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6650) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, USB_DEVICE_ID_ILITEK_MULTITOUCH) },
@@ -1498,11 +1503,15 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
@@ -1544,11 +1553,21 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
@@ -1768,11 +1787,12 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x000a) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30) },
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 9a243ca..01dd9a7 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -31,6 +31,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/sched.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/poll.h>
@@ -113,6 +114,14 @@
       {0, 0xbd, "FlareRelease"},
       {0, 0xbe, "LandingGear"},
       {0, 0xbf, "ToeBrake"},
+  {  6, 0, "GenericDeviceControls" },
+      {0, 0x20, "BatteryStrength" },
+      {0, 0x21, "WirelessChannel" },
+      {0, 0x22, "WirelessID" },
+      {0, 0x23, "DiscoverWirelessControl" },
+      {0, 0x24, "SecurityCodeCharacterEntered" },
+      {0, 0x25, "SecurityCodeCharactedErased" },
+      {0, 0x26, "SecurityCodeCleared" },
   {  7, 0, "Keyboard" },
   {  8, 0, "LED" },
       {0, 0x01, "NumLock"},
diff --git a/drivers/hid/hid-dr.c b/drivers/hid/hid-dr.c
index 61eece4..e832f44 100644
--- a/drivers/hid/hid-dr.c
+++ b/drivers/hid/hid-dr.c
@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
+#include <linux/module.h>
 
 #include "hid-ids.h"
 
diff --git a/drivers/hid/hid-emsff.c b/drivers/hid/hid-emsff.c
index a5dc13f..2630d48 100644
--- a/drivers/hid/hid-emsff.c
+++ b/drivers/hid/hid-emsff.c
@@ -24,6 +24,7 @@
 #include <linux/hid.h>
 #include <linux/input.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 
 #include "hid-ids.h"
 #include "usbhid/usbhid.h"
@@ -139,7 +140,7 @@
 }
 
 static const struct hid_device_id ems_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, 0x118) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ems_devices);
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 279ba53..f1e1bcf 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
+#include <linux/module.h>
 #include "hid-ids.h"
 
 #ifdef CONFIG_GREENASIA_FF
diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c
index 91e3a03..4e75421 100644
--- a/drivers/hid/hid-holtekff.c
+++ b/drivers/hid/hid-holtekff.c
@@ -25,6 +25,7 @@
 
 #include <linux/hid.h>
 #include <linux/input.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
 
diff --git a/drivers/staging/hv/hv_mouse.c b/drivers/hid/hid-hyperv.c
similarity index 74%
rename from drivers/staging/hv/hv_mouse.c
rename to drivers/hid/hid-hyperv.c
index ccd39c7..0c33ae9 100644
--- a/drivers/staging/hv/hv_mouse.c
+++ b/drivers/hid/hid-hyperv.c
@@ -14,11 +14,8 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
+#include <linux/completion.h>
 #include <linux/input.h>
 #include <linux/hid.h>
 #include <linux/hiddev.h>
@@ -118,7 +115,6 @@
 #define INPUTVSC_SEND_RING_BUFFER_SIZE		(10*PAGE_SIZE)
 #define INPUTVSC_RECV_RING_BUFFER_SIZE		(10*PAGE_SIZE)
 
-#define NBITS(x) (((x)/BITS_PER_LONG)+1)
 
 enum pipe_prot_msg_type {
 	PIPE_MESSAGE_INVALID,
@@ -148,7 +144,8 @@
  */
 struct mousevsc_dev {
 	struct hv_device	*device;
-	unsigned char		init_complete;
+	bool			init_complete;
+	bool			connected;
 	struct mousevsc_prt_msg	protocol_req;
 	struct mousevsc_prt_msg	protocol_resp;
 	/* Synchronize the request/response if needed */
@@ -159,12 +156,11 @@
 	unsigned char		*report_desc;
 	u32			report_desc_size;
 	struct hv_input_dev_info hid_dev_info;
-	int			connected;
 	struct hid_device       *hid_device;
 };
 
 
-static struct mousevsc_dev *alloc_input_device(struct hv_device *device)
+static struct mousevsc_dev *mousevsc_alloc_device(struct hv_device *device)
 {
 	struct mousevsc_dev *input_dev;
 
@@ -176,11 +172,12 @@
 	input_dev->device = device;
 	hv_set_drvdata(device, input_dev);
 	init_completion(&input_dev->wait_event);
+	input_dev->init_complete = false;
 
 	return input_dev;
 }
 
-static void free_input_device(struct mousevsc_dev *device)
+static void mousevsc_free_device(struct mousevsc_dev *device)
 {
 	kfree(device->hid_desc);
 	kfree(device->report_desc);
@@ -188,7 +185,6 @@
 	kfree(device);
 }
 
-
 static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device,
 				struct synthhid_device_info *device_info)
 {
@@ -196,14 +192,12 @@
 	struct hid_descriptor *desc;
 	struct mousevsc_prt_msg ack;
 
-	/* Assume success for now */
-	input_device->dev_info_status = 0;
+	input_device->dev_info_status = -ENOMEM;
 
-	memcpy(&input_device->hid_dev_info, &device_info->hid_dev_info,
-		sizeof(struct hv_input_dev_info));
-
+	input_device->hid_dev_info = device_info->hid_dev_info;
 	desc = &device_info->hid_descriptor;
-	WARN_ON(desc->bLength == 0);
+	if (desc->bLength == 0)
+		goto cleanup;
 
 	input_device->hid_desc = kzalloc(desc->bLength, GFP_ATOMIC);
 
@@ -213,13 +207,18 @@
 	memcpy(input_device->hid_desc, desc, desc->bLength);
 
 	input_device->report_desc_size = desc->desc[0].wDescriptorLength;
-	if (input_device->report_desc_size == 0)
+	if (input_device->report_desc_size == 0) {
+		input_device->dev_info_status = -EINVAL;
 		goto cleanup;
+	}
+
 	input_device->report_desc = kzalloc(input_device->report_desc_size,
 					  GFP_ATOMIC);
 
-	if (!input_device->report_desc)
+	if (!input_device->report_desc) {
+		input_device->dev_info_status = -ENOMEM;
 		goto cleanup;
+	}
 
 	memcpy(input_device->report_desc,
 	       ((unsigned char *)desc) + desc->bLength,
@@ -242,22 +241,14 @@
 			(unsigned long)&ack,
 			VM_PKT_DATA_INBAND,
 			VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-	if (ret != 0)
-		goto cleanup;
 
+	if (!ret)
+		input_device->dev_info_status = 0;
+
+cleanup:
 	complete(&input_device->wait_event);
 
 	return;
-
-cleanup:
-	kfree(input_device->hid_desc);
-	input_device->hid_desc = NULL;
-
-	kfree(input_device->report_desc);
-	input_device->report_desc = NULL;
-
-	input_device->dev_info_status = -1;
-	complete(&input_device->wait_event);
 }
 
 static void mousevsc_on_receive(struct hv_device *device,
@@ -274,10 +265,22 @@
 	if (pipe_msg->type != PIPE_MESSAGE_DATA)
 		return;
 
-	hid_msg = (struct synthhid_msg *)&pipe_msg->data[0];
+	hid_msg = (struct synthhid_msg *)pipe_msg->data;
 
 	switch (hid_msg->header.type) {
 	case SYNTH_HID_PROTOCOL_RESPONSE:
+		/*
+		 * While it will be impossible for us to protect against
+		 * malicious/buggy hypervisor/host, add a check here to
+		 * ensure we don't corrupt memory.
+		 */
+		if ((pipe_msg->size + sizeof(struct pipe_prt_msg)
+			- sizeof(unsigned char))
+			> sizeof(struct mousevsc_prt_msg)) {
+			WARN_ON(1);
+			break;
+		}
+
 		memcpy(&input_dev->protocol_resp, pipe_msg,
 		       pipe_msg->size + sizeof(struct pipe_prt_msg) -
 		       sizeof(unsigned char));
@@ -292,11 +295,11 @@
 		 * hid desc and report desc
 		 */
 		mousevsc_on_receive_device_info(input_dev,
-			(struct synthhid_device_info *)&pipe_msg->data[0]);
+			(struct synthhid_device_info *)pipe_msg->data);
 		break;
 	case SYNTH_HID_INPUT_REPORT:
 		input_report =
-			(struct synthhid_input_report *)&pipe_msg->data[0];
+			(struct synthhid_input_report *)pipe_msg->data;
 		if (!input_dev->init_complete)
 			break;
 		hid_input_report(input_dev->hid_device,
@@ -313,73 +316,60 @@
 
 static void mousevsc_on_channel_callback(void *context)
 {
-	const int packetSize = 0x100;
-	int ret = 0;
-	struct hv_device *device = (struct hv_device *)context;
-
+	const int packet_size = 0x100;
+	int ret;
+	struct hv_device *device = context;
 	u32 bytes_recvd;
 	u64 req_id;
-	unsigned char packet[0x100];
 	struct vmpacket_descriptor *desc;
-	unsigned char	*buffer = packet;
-	int	bufferlen = packetSize;
+	unsigned char	*buffer;
+	int	bufferlen = packet_size;
 
+	buffer = kmalloc(bufferlen, GFP_ATOMIC);
+	if (!buffer)
+		return;
 
 	do {
 		ret = vmbus_recvpacket_raw(device->channel, buffer,
 					bufferlen, &bytes_recvd, &req_id);
 
-		if (ret == 0) {
-			if (bytes_recvd > 0) {
-				desc = (struct vmpacket_descriptor *)buffer;
+		switch (ret) {
+		case 0:
+			if (bytes_recvd <= 0) {
+				kfree(buffer);
+				return;
+			}
+			desc = (struct vmpacket_descriptor *)buffer;
 
-				switch (desc->type) {
-				case VM_PKT_COMP:
-					break;
+			switch (desc->type) {
+			case VM_PKT_COMP:
+				break;
 
-				case VM_PKT_DATA_INBAND:
-					mousevsc_on_receive(
-						device, desc);
-					break;
+			case VM_PKT_DATA_INBAND:
+				mousevsc_on_receive(device, desc);
+				break;
 
-				default:
-					pr_err("unhandled packet type %d, tid %llx len %d\n",
-						   desc->type,
-						   req_id,
-						   bytes_recvd);
-					break;
-				}
-
-				/* reset */
-				if (bufferlen > packetSize) {
-					kfree(buffer);
-
-					buffer = packet;
-					bufferlen = packetSize;
-				}
-			} else {
-				if (bufferlen > packetSize) {
-					kfree(buffer);
-
-					buffer = packet;
-					bufferlen = packetSize;
-				}
+			default:
+				pr_err("unhandled packet type %d, tid %llx len %d\n",
+					desc->type, req_id, bytes_recvd);
 				break;
 			}
-		} else if (ret == -ENOBUFS) {
+
+			break;
+
+		case -ENOBUFS:
+			kfree(buffer);
 			/* Handle large packet */
 			bufferlen = bytes_recvd;
-			buffer = kzalloc(bytes_recvd, GFP_ATOMIC);
+			buffer = kmalloc(bytes_recvd, GFP_ATOMIC);
 
-			if (buffer == NULL) {
-				buffer = packet;
-				bufferlen = packetSize;
-				break;
-			}
+			if (!buffer)
+				return;
+
+			break;
 		}
 	} while (1);
 
-	return;
 }
 
 static int mousevsc_connect_to_vsp(struct hv_device *device)
@@ -390,19 +380,15 @@
 	struct mousevsc_prt_msg *request;
 	struct mousevsc_prt_msg *response;
 
-
 	request = &input_dev->protocol_req;
-
 	memset(request, 0, sizeof(struct mousevsc_prt_msg));
 
 	request->type = PIPE_MESSAGE_DATA;
 	request->size = sizeof(struct synthhid_protocol_request);
-
 	request->request.header.type = SYNTH_HID_PROTOCOL_REQUEST;
 	request->request.header.size = sizeof(unsigned int);
 	request->request.version_requested.version = SYNTHHID_INPUT_VERSION;
 
-
 	ret = vmbus_sendpacket(device->channel, request,
 				sizeof(struct pipe_prt_msg) -
 				sizeof(unsigned char) +
@@ -410,11 +396,11 @@
 				(unsigned long)request,
 				VM_PKT_DATA_INBAND,
 				VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-	if (ret != 0)
+	if (ret)
 		goto cleanup;
 
 	t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);
-	if (t == 0) {
+	if (!t) {
 		ret = -ETIMEDOUT;
 		goto cleanup;
 	}
@@ -422,14 +408,14 @@
 	response = &input_dev->protocol_resp;
 
 	if (!response->response.approved) {
-		pr_err("synthhid protocol request failed (version %d)",
+		pr_err("synthhid protocol request failed (version %d)\n",
 		       SYNTHHID_INPUT_VERSION);
 		ret = -ENODEV;
 		goto cleanup;
 	}
 
 	t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);
-	if (t == 0) {
+	if (!t) {
 		ret = -ETIMEDOUT;
 		goto cleanup;
 	}
@@ -438,11 +424,9 @@
 	 * We should have gotten the device attr, hid desc and report
 	 * desc at this point
 	 */
-	if (input_dev->dev_info_status)
-		ret = -ENOMEM;
+	ret = input_dev->dev_info_status;
 
 cleanup:
-
 	return ret;
 }
 
@@ -451,61 +435,40 @@
 	return 0;
 }
 
+static int mousevsc_hid_start(struct hid_device *hid)
+{
+	return 0;
+}
+
 static void mousevsc_hid_close(struct hid_device *hid)
 {
 }
 
+static void mousevsc_hid_stop(struct hid_device *hid)
+{
+}
+
 static struct hid_ll_driver mousevsc_ll_driver = {
 	.open = mousevsc_hid_open,
 	.close = mousevsc_hid_close,
+	.start = mousevsc_hid_start,
+	.stop = mousevsc_hid_stop,
 };
 
 static struct hid_driver mousevsc_hid_driver;
 
-static void reportdesc_callback(struct hv_device *dev, void *packet, u32 len)
+static int mousevsc_probe(struct hv_device *device,
+			const struct hv_vmbus_device_id *dev_id)
 {
-	struct hid_device *hid_dev;
-	struct mousevsc_dev *input_device = hv_get_drvdata(dev);
-
-	hid_dev = hid_allocate_device();
-	if (IS_ERR(hid_dev))
-		return;
-
-	hid_dev->ll_driver = &mousevsc_ll_driver;
-	hid_dev->driver = &mousevsc_hid_driver;
-
-	if (hid_parse_report(hid_dev, packet, len))
-		return;
-
-	hid_dev->bus = BUS_VIRTUAL;
-	hid_dev->vendor = input_device->hid_dev_info.vendor;
-	hid_dev->product = input_device->hid_dev_info.product;
-	hid_dev->version = input_device->hid_dev_info.version;
-
-	sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");
-
-	if (!hidinput_connect(hid_dev, 0)) {
-		hid_dev->claimed |= HID_CLAIMED_INPUT;
-
-		input_device->connected = 1;
-
-	}
-
-	input_device->hid_device = hid_dev;
-}
-
-static int mousevsc_on_device_add(struct hv_device *device)
-{
-	int ret = 0;
+	int ret;
 	struct mousevsc_dev *input_dev;
+	struct hid_device *hid_dev;
 
-	input_dev = alloc_input_device(device);
+	input_dev = mousevsc_alloc_device(device);
 
 	if (!input_dev)
 		return -ENOMEM;
 
-	input_dev->init_complete = false;
-
 	ret = vmbus_open(device->channel,
 		INPUTVSC_SEND_RING_BUFFER_SIZE,
 		INPUTVSC_RECV_RING_BUFFER_SIZE,
@@ -515,54 +478,78 @@
 		device
 		);
 
-	if (ret != 0) {
-		free_input_device(input_dev);
-		return ret;
-	}
-
+	if (ret)
+		goto probe_err0;
 
 	ret = mousevsc_connect_to_vsp(device);
 
-	if (ret != 0) {
-		vmbus_close(device->channel);
-		free_input_device(input_dev);
-		return ret;
-	}
-
+	if (ret)
+		goto probe_err1;
 
 	/* workaround SA-167 */
 	if (input_dev->report_desc[14] == 0x25)
 		input_dev->report_desc[14] = 0x29;
 
-	reportdesc_callback(device, input_dev->report_desc,
-			    input_dev->report_desc_size);
+	hid_dev = hid_allocate_device();
+	if (IS_ERR(hid_dev)) {
+		ret = PTR_ERR(hid_dev);
+		goto probe_err1;
+	}
 
+	hid_dev->ll_driver = &mousevsc_ll_driver;
+	hid_dev->driver = &mousevsc_hid_driver;
+	hid_dev->bus = BUS_VIRTUAL;
+	hid_dev->vendor = input_dev->hid_dev_info.vendor;
+	hid_dev->product = input_dev->hid_dev_info.product;
+	hid_dev->version = input_dev->hid_dev_info.version;
+	input_dev->hid_device = hid_dev;
+
+	sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");
+
+	ret = hid_add_device(hid_dev);
+	if (ret)
+		goto probe_err1;
+
+	ret = hid_parse_report(hid_dev, input_dev->report_desc,
+				input_dev->report_desc_size);
+
+	if (ret) {
+		hid_err(hid_dev, "parse failed\n");
+		goto probe_err2;
+	}
+
+	ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV);
+
+	if (ret) {
+		hid_err(hid_dev, "hw start failed\n");
+		goto probe_err2;
+	}
+
+	input_dev->connected = true;
 	input_dev->init_complete = true;
 
 	return ret;
+
+probe_err2:
+	hid_destroy_device(hid_dev);
+
+probe_err1:
+	vmbus_close(device->channel);
+
+probe_err0:
+	mousevsc_free_device(input_dev);
+
+	return ret;
 }
 
-static int mousevsc_probe(struct hv_device *dev,
-			const struct hv_vmbus_device_id *dev_id)
-{
-
-	return mousevsc_on_device_add(dev);
-
-}
 
 static int mousevsc_remove(struct hv_device *dev)
 {
 	struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
 
 	vmbus_close(dev->channel);
-
-	if (input_dev->connected) {
-		hidinput_disconnect(input_dev->hid_device);
-		input_dev->connected = 0;
-		hid_destroy_device(input_dev->hid_device);
-	}
-
-	free_input_device(input_dev);
+	hid_destroy_device(input_dev->hid_device);
+	mousevsc_free_device(input_dev);
 
 	return 0;
 }
@@ -577,7 +564,7 @@
 MODULE_DEVICE_TABLE(vmbus, id_table);
 
 static struct  hv_driver mousevsc_drv = {
-	.name = "mousevsc",
+	.name = KBUILD_MODNAME,
 	.id_table = id_table,
 	.probe = mousevsc_probe,
 	.remove = mousevsc_remove,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 06ce996..448e9d8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -21,6 +21,7 @@
 #define USB_VENDOR_ID_3M		0x0596
 #define USB_DEVICE_ID_3M1968		0x0500
 #define USB_DEVICE_ID_3M2256		0x0502
+#define USB_DEVICE_ID_3M3266		0x0506
 
 #define USB_VENDOR_ID_A4TECH		0x09da
 #define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
@@ -145,6 +146,9 @@
 #define USB_DEVICE_ID_ATEN_4PORTKVM	0x2205
 #define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
 
+#define USB_VENDOR_ID_ATMEL		0x03eb
+#define USB_DEVICE_ID_ATMEL_MULTITOUCH	0x211c
+
 #define USB_VENDOR_ID_AVERMEDIA		0x07ca
 #define USB_DEVICE_ID_AVER_FM_MR800	0xb800
 
@@ -230,11 +234,14 @@
 
 #define USB_VENDOR_ID_DWAV		0x0eef
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1	0x720c
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2	0x72a1
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3	0x480e
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4	0x726b
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D	0x480d
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E	0x480e
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C	0x720c
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B	0x726b
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA	0x72fa
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302	0x7302
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001	0xa001
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
@@ -266,7 +273,7 @@
 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR	0x0002
 
 #define USB_VENDOR_ID_GENERAL_TOUCH	0x0dfc
-#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001
+#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003
 
 #define USB_VENDOR_ID_GLAB		0x06c2
 #define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
@@ -356,6 +363,9 @@
 #define USB_VENDOR_ID_HANVON		0x20b3
 #define USB_DEVICE_ID_HANVON_MULTITOUCH	0x0a18
 
+#define USB_VENDOR_ID_HANVON_ALT	0x22ed
+#define USB_DEVICE_ID_HANVON_ALT_MULTITOUCH	0x1010
+
 #define USB_VENDOR_ID_HAPP		0x078b
 #define USB_DEVICE_ID_UGCI_DRIVING	0x0010
 #define USB_DEVICE_ID_UGCI_FLYING	0x0020
@@ -571,6 +581,11 @@
 #define USB_VENDOR_ID_PI_ENGINEERING	0x05f3
 #define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL	0xff
 
+#define USB_VENDOR_ID_PIXART				0x093a
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN	0x8001
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1	0x8002
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2	0x8003
+
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
@@ -581,11 +596,14 @@
 #define USB_DEVICE_ID_PRODIGE_CORDLESS	0x3062
 
 #define USB_VENDOR_ID_QUANTA		0x0408
-#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH	0x3000
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH		0x3000
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001		0x3001
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008		0x3008
 #define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN	0x3001
 
 #define USB_VENDOR_ID_ROCCAT		0x1e7d
 #define USB_DEVICE_ID_ROCCAT_ARVO	0x30d4
+#define USB_DEVICE_ID_ROCCAT_ISKU	0x319c
 #define USB_DEVICE_ID_ROCCAT_KONE	0x2ced
 #define USB_DEVICE_ID_ROCCAT_KONEPLUS	0x2d51
 #define USB_DEVICE_ID_ROCCAT_KOVAPLUS	0x2d50
@@ -679,6 +697,7 @@
 
 #define USB_VENDOR_ID_WACOM		0x056a
 #define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH	0x81
+#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH   0x00BD
 
 #define USB_VENDOR_ID_WALTOP				0x172f
 #define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH	0x0032
@@ -707,6 +726,17 @@
 #define USB_VENDOR_ID_XAT	0x2505
 #define USB_DEVICE_ID_XAT_CSR	0x0220
 
+#define USB_VENDOR_ID_XIROKU		0x1477
+#define USB_DEVICE_ID_XIROKU_SPX	0x1006
+#define USB_DEVICE_ID_XIROKU_MPX	0x1007
+#define USB_DEVICE_ID_XIROKU_CSR	0x100e
+#define USB_DEVICE_ID_XIROKU_SPX1	0x1021
+#define USB_DEVICE_ID_XIROKU_CSR1	0x1022
+#define USB_DEVICE_ID_XIROKU_MPX1	0x1023
+#define USB_DEVICE_ID_XIROKU_SPX2	0x1024
+#define USB_DEVICE_ID_XIROKU_CSR2	0x1025
+#define USB_DEVICE_ID_XIROKU_MPX2	0x1026
+
 #define USB_VENDOR_ID_YEALINK		0x6993
 #define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K	0xb001
 
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index f333139..c6ee632 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -271,6 +271,97 @@
 	return logical_extents / physical_extents;
 }
 
+#ifdef CONFIG_HID_BATTERY_STRENGTH
+static enum power_supply_property hidinput_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static int hidinput_get_battery_property(struct power_supply *psy,
+					 enum power_supply_property prop,
+					 union power_supply_propval *val)
+{
+	struct hid_device *dev = container_of(psy, struct hid_device, battery);
+	int ret = 0;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = 1;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (dev->battery_min < dev->battery_max &&
+		    dev->battery_val >= dev->battery_min &&
+		    dev->battery_val <= dev->battery_max)
+			val->intval = (100 * (dev->battery_val - dev->battery_min)) /
+				(dev->battery_max - dev->battery_min);
+		else
+			ret = -EINVAL;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = dev->name;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static void hidinput_setup_battery(struct hid_device *dev, s32 min, s32 max)
+{
+	struct power_supply *battery = &dev->battery;
+	int ret;
+
+	if (battery->name != NULL)
+		return;		/* already initialized? */
+
+	battery->name = kasprintf(GFP_KERNEL, "hid-%s-battery", dev->uniq);
+	if (battery->name == NULL)
+		return;
+
+	battery->type = POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties = hidinput_battery_props;
+	battery->num_properties = ARRAY_SIZE(hidinput_battery_props);
+	battery->use_for_apm = 0;
+	battery->get_property = hidinput_get_battery_property;
+
+	dev->battery_min = min;
+	dev->battery_max = max;
+
+	ret = power_supply_register(&dev->dev, battery);
+	if (ret != 0) {
+		hid_warn(dev, "can't register power supply: %d\n", ret);
+		kfree(battery->name);
+		battery->name = NULL;
+	}
+}
+
+static void hidinput_cleanup_battery(struct hid_device *dev)
+{
+	if (!dev->battery.name)
+		return;
+
+	power_supply_unregister(&dev->battery);
+	kfree(dev->battery.name);
+	dev->battery.name = NULL;
+}
+#else  /* !CONFIG_HID_BATTERY_STRENGTH */
+static void hidinput_setup_battery(struct hid_device *dev, s32 min, s32 max)
+{
+}
+
+static void hidinput_cleanup_battery(struct hid_device *dev)
+{
+}
+#endif	/* CONFIG_HID_BATTERY_STRENGTH */
+
 static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field,
 				     struct hid_usage *usage)
 {
@@ -629,6 +720,16 @@
 		}
 		break;
 
+	case HID_UP_GENDEVCTRLS:
+		if ((usage->hid & HID_USAGE) == 0x20) {	/* Battery Strength */
+			hidinput_setup_battery(device,
+					       field->logical_minimum,
+					       field->logical_maximum);
+			goto ignore;
+		} else
+			goto unknown;
+		break;
+
 	case HID_UP_HPVENDOR:	/* Reported on a Dutch layout HP5308 */
 		set_bit(EV_REP, input->evbit);
 		switch (usage->hid & HID_USAGE) {
@@ -760,6 +861,14 @@
 
 	input = field->hidinput->input;
 
+#ifdef CONFIG_HID_BATTERY_STRENGTH
+	if (usage->hid == HID_DC_BATTERYSTRENGTH) {
+		hid->battery_val = value;
+		hid_dbg(hid, "battery value is %d (range %d-%d)\n",
+			value, hid->battery_min, hid->battery_max);
+		return;
+	}
+#endif
 	if (!usage->type)
 		return;
 
@@ -822,6 +931,12 @@
 		return;
 	}
 
+	/* Ignore out-of-range values as per HID specification, section 5.10 */
+	if (value < field->logical_minimum || value > field->logical_maximum) {
+		dbg_hid("Ignoring out-of-range value %x\n", value);
+		return;
+	}
+
 	/* report the usage code as scancode if the key status has changed */
 	if (usage->type == EV_KEY && !!test_bit(usage->code, input->key) != value)
 		input_event(input, EV_MSC, MSC_SCAN, usage->hid);
@@ -861,6 +976,48 @@
 }
 EXPORT_SYMBOL_GPL(hidinput_find_field);
 
+struct hid_field *hidinput_get_led_field(struct hid_device *hid)
+{
+	struct hid_report *report;
+	struct hid_field *field;
+	int i, j;
+
+	list_for_each_entry(report,
+			    &hid->report_enum[HID_OUTPUT_REPORT].report_list,
+			    list) {
+		for (i = 0; i < report->maxfield; i++) {
+			field = report->field[i];
+			for (j = 0; j < field->maxusage; j++)
+				if (field->usage[j].type == EV_LED)
+					return field;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(hidinput_get_led_field);
+
+unsigned int hidinput_count_leds(struct hid_device *hid)
+{
+	struct hid_report *report;
+	struct hid_field *field;
+	int i, j;
+	unsigned int count = 0;
+
+	list_for_each_entry(report,
+			    &hid->report_enum[HID_OUTPUT_REPORT].report_list,
+			    list) {
+		for (i = 0; i < report->maxfield; i++) {
+			field = report->field[i];
+			for (j = 0; j < field->maxusage; j++)
+				if (field->usage[j].type == EV_LED &&
+				    field->value[j])
+					count += 1;
+		}
+	}
+	return count;
+}
+EXPORT_SYMBOL_GPL(hidinput_count_leds);
+
 static int hidinput_open(struct input_dev *dev)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
@@ -1010,6 +1167,8 @@
 {
 	struct hid_input *hidinput, *next;
 
+	hidinput_cleanup_battery(hid);
+
 	list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
 		list_del(&hidinput->list);
 		input_unregister_device(hidinput->input);
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 103f30d..6ecc9e2 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -430,7 +430,7 @@
 	}
 
 	/* Add the device to device_list */
-	entry = (struct lg4ff_device_entry *)kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
+	entry = kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
 	if (!entry) {
 		hid_err(hid, "Cannot add device, insufficient memory.\n");
 		return -ENOMEM;
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index f1c909f..24fc442 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -50,7 +50,6 @@
 #define MT_QUIRK_ALWAYS_VALID		(1 << 4)
 #define MT_QUIRK_VALID_IS_INRANGE	(1 << 5)
 #define MT_QUIRK_VALID_IS_CONFIDENCE	(1 << 6)
-#define MT_QUIRK_EGALAX_XYZ_FIXUP	(1 << 7)
 #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE	(1 << 8)
 
 struct mt_slot {
@@ -60,20 +59,6 @@
 	bool seen_in_this_frame;/* has this slot been updated */
 };
 
-struct mt_device {
-	struct mt_slot curdata;	/* placeholder of incoming data */
-	struct mt_class *mtclass;	/* our mt device class */
-	unsigned last_field_index;	/* last field index of the report */
-	unsigned last_slot_field;	/* the last field of a slot */
-	int last_mt_collection;	/* last known mt-related collection */
-	__s8 inputmode;		/* InputMode HID feature, -1 if non-existent */
-	__u8 num_received;	/* how many contacts we received */
-	__u8 num_expected;	/* expected last contact index */
-	__u8 maxcontacts;
-	bool curvalid;		/* is the current contact valid? */
-	struct mt_slot *slots;
-};
-
 struct mt_class {
 	__s32 name;	/* MT_CLS */
 	__s32 quirks;
@@ -84,20 +69,37 @@
 	__u8 maxcontacts;
 };
 
+struct mt_device {
+	struct mt_slot curdata;	/* placeholder of incoming data */
+	struct mt_class mtclass;	/* our mt device class */
+	unsigned last_field_index;	/* last field index of the report */
+	unsigned last_slot_field;	/* the last field of a slot */
+	int last_mt_collection;	/* last known mt-related collection */
+	__s8 inputmode;		/* InputMode HID feature, -1 if non-existent */
+	__u8 num_received;	/* how many contacts we received */
+	__u8 num_expected;	/* expected last contact index */
+	__u8 maxcontacts;
+	bool curvalid;		/* is the current contact valid? */
+	struct mt_slot *slots;
+};
+
 /* classes of device behavior */
 #define MT_CLS_DEFAULT				0x0001
 
 #define MT_CLS_SERIAL				0x0002
 #define MT_CLS_CONFIDENCE			0x0003
-#define MT_CLS_CONFIDENCE_MINUS_ONE		0x0004
-#define MT_CLS_DUAL_INRANGE_CONTACTID		0x0005
-#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER	0x0006
-#define MT_CLS_DUAL_NSMU_CONTACTID		0x0007
+#define MT_CLS_CONFIDENCE_CONTACT_ID		0x0004
+#define MT_CLS_CONFIDENCE_MINUS_ONE		0x0005
+#define MT_CLS_DUAL_INRANGE_CONTACTID		0x0006
+#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER	0x0007
+#define MT_CLS_DUAL_NSMU_CONTACTID		0x0008
+#define MT_CLS_INRANGE_CONTACTNUMBER		0x0009
 
 /* vendor specific classes */
 #define MT_CLS_3M				0x0101
 #define MT_CLS_CYPRESS				0x0102
 #define MT_CLS_EGALAX				0x0103
+#define MT_CLS_EGALAX_SERIAL			0x0104
 
 #define MT_DEFAULT_MAXCONTACT	10
 
@@ -133,13 +135,16 @@
 	return -1;
 }
 
-struct mt_class mt_classes[] = {
+static struct mt_class mt_classes[] = {
 	{ .name = MT_CLS_DEFAULT,
 		.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP },
 	{ .name = MT_CLS_SERIAL,
 		.quirks = MT_QUIRK_ALWAYS_VALID},
 	{ .name = MT_CLS_CONFIDENCE,
 		.quirks = MT_QUIRK_VALID_IS_CONFIDENCE },
+	{ .name = MT_CLS_CONFIDENCE_CONTACT_ID,
+		.quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
+			MT_QUIRK_SLOT_IS_CONTACTID },
 	{ .name = MT_CLS_CONFIDENCE_MINUS_ONE,
 		.quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
 			MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE },
@@ -155,6 +160,9 @@
 		.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
 			MT_QUIRK_SLOT_IS_CONTACTID,
 		.maxcontacts = 2 },
+	{ .name = MT_CLS_INRANGE_CONTACTNUMBER,
+		.quirks = MT_QUIRK_VALID_IS_INRANGE |
+			MT_QUIRK_SLOT_IS_CONTACTNUMBER },
 
 	/*
 	 * vendor specific classes
@@ -171,9 +179,13 @@
 		.maxcontacts = 10 },
 	{ .name = MT_CLS_EGALAX,
 		.quirks =  MT_QUIRK_SLOT_IS_CONTACTID |
-			MT_QUIRK_VALID_IS_INRANGE |
-			MT_QUIRK_EGALAX_XYZ_FIXUP,
-		.maxcontacts = 2,
+			MT_QUIRK_VALID_IS_INRANGE,
+		.sn_move = 4096,
+		.sn_pressure = 32,
+	},
+	{ .name = MT_CLS_EGALAX_SERIAL,
+		.quirks =  MT_QUIRK_SLOT_IS_CONTACTID |
+			MT_QUIRK_ALWAYS_VALID,
 		.sn_move = 4096,
 		.sn_pressure = 32,
 	},
@@ -181,6 +193,44 @@
 	{ }
 };
 
+static ssize_t mt_show_quirks(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	struct mt_device *td = hid_get_drvdata(hdev);
+
+	return sprintf(buf, "%u\n", td->mtclass.quirks);
+}
+
+static ssize_t mt_set_quirks(struct device *dev,
+			  struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	struct mt_device *td = hid_get_drvdata(hdev);
+
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	td->mtclass.quirks = val;
+
+	return count;
+}
+
+static DEVICE_ATTR(quirks, S_IWUSR | S_IRUGO, mt_show_quirks, mt_set_quirks);
+
+static struct attribute *sysfs_attrs[] = {
+	&dev_attr_quirks.attr,
+	NULL
+};
+
+static struct attribute_group mt_attribute_group = {
+	.attrs = sysfs_attrs
+};
+
 static void mt_feature_mapping(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage)
 {
@@ -192,9 +242,9 @@
 		break;
 	case HID_DG_CONTACTMAX:
 		td->maxcontacts = field->value[0];
-		if (td->mtclass->maxcontacts)
+		if (td->mtclass.maxcontacts)
 			/* check if the maxcontacts is given by the class */
-			td->maxcontacts = td->mtclass->maxcontacts;
+			td->maxcontacts = td->mtclass.maxcontacts;
 
 		break;
 	}
@@ -214,8 +264,7 @@
 		unsigned long **bit, int *max)
 {
 	struct mt_device *td = hid_get_drvdata(hdev);
-	struct mt_class *cls = td->mtclass;
-	__s32 quirks = cls->quirks;
+	struct mt_class *cls = &td->mtclass;
 
 	/* Only map fields from TouchScreen or TouchPad collections.
          * We need to ignore fields that belong to other collections
@@ -227,13 +276,17 @@
 	else
 		return 0;
 
+	/* eGalax devices provide a Digitizer.Stylus input which overrides
+	 * the correct Digitizers.Finger X/Y ranges.
+	 * Let's just ignore this input. */
+	if (field->physical == HID_DG_STYLUS)
+		return -1;
+
 	switch (usage->hid & HID_USAGE_PAGE) {
 
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
-			if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
-				field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_X);
 			set_abs(hi->input, ABS_MT_POSITION_X, field,
@@ -246,8 +299,6 @@
 			}
 			return 1;
 		case HID_GD_Y:
-			if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
-				field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_Y);
 			set_abs(hi->input, ABS_MT_POSITION_Y, field,
@@ -315,8 +366,6 @@
 			}
 			return 1;
 		case HID_DG_TIPPRESSURE:
-			if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
-				field->logical_minimum = 0;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_PRESSURE);
 			set_abs(hi->input, ABS_MT_PRESSURE, field,
@@ -363,7 +412,7 @@
 
 static int mt_compute_slot(struct mt_device *td)
 {
-	__s32 quirks = td->mtclass->quirks;
+	__s32 quirks = td->mtclass.quirks;
 
 	if (quirks & MT_QUIRK_SLOT_IS_CONTACTID)
 		return td->curdata.contactid;
@@ -407,7 +456,7 @@
 
 	for (i = 0; i < td->maxcontacts; ++i) {
 		struct mt_slot *s = &(td->slots[i]);
-		if ((td->mtclass->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) &&
+		if ((td->mtclass.quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) &&
 			!s->seen_in_this_frame) {
 			s->touch_state = false;
 		}
@@ -444,7 +493,7 @@
 				struct hid_usage *usage, __s32 value)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
-	__s32 quirks = td->mtclass->quirks;
+	__s32 quirks = td->mtclass.quirks;
 
 	if (hid->claimed & HID_CLAIMED_INPUT && td->slots) {
 		switch (usage->hid) {
@@ -552,7 +601,7 @@
 		dev_err(&hdev->dev, "cannot allocate multitouch data\n");
 		return -ENOMEM;
 	}
-	td->mtclass = mtclass;
+	td->mtclass = *mtclass;
 	td->inputmode = -1;
 	td->last_mt_collection = -1;
 	hid_set_drvdata(hdev, td);
@@ -574,6 +623,8 @@
 		goto fail;
 	}
 
+	ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group);
+
 	mt_set_input_mode(hdev);
 
 	return 0;
@@ -594,6 +645,7 @@
 static void mt_remove(struct hid_device *hdev)
 {
 	struct mt_device *td = hid_get_drvdata(hdev);
+	sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
 	hid_hw_stop(hdev);
 	kfree(td->slots);
 	kfree(td);
@@ -609,12 +661,20 @@
 	{ .driver_data = MT_CLS_3M,
 		HID_USB_DEVICE(USB_VENDOR_ID_3M,
 			USB_DEVICE_ID_3M2256) },
+	{ .driver_data = MT_CLS_3M,
+		HID_USB_DEVICE(USB_VENDOR_ID_3M,
+			USB_DEVICE_ID_3M3266) },
 
 	/* ActionStar panels */
 	{ .driver_data = MT_CLS_DEFAULT,
 		HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR,
 			USB_DEVICE_ID_ACTIONSTAR_1011) },
 
+	/* Atmel panels */
+	{ .driver_data = MT_CLS_SERIAL,
+		HID_USB_DEVICE(USB_VENDOR_ID_ATMEL,
+			USB_DEVICE_ID_ATMEL_MULTITOUCH) },
+
 	/* Cando panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
 		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
@@ -645,23 +705,32 @@
 			USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
 
 	/* eGalax devices (resistive) */
-	{  .driver_data = MT_CLS_EGALAX,
+	{ .driver_data = MT_CLS_EGALAX,
 		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
-	{  .driver_data = MT_CLS_EGALAX,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) },
+	{ .driver_data = MT_CLS_EGALAX,
 		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
 
 	/* eGalax devices (capacitive) */
-	{  .driver_data = MT_CLS_EGALAX,
+	{ .driver_data = MT_CLS_EGALAX,
 		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
-	{  .driver_data = MT_CLS_EGALAX,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
+	{ .driver_data = MT_CLS_EGALAX,
 		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
-	{  .driver_data = MT_CLS_EGALAX,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
+	{ .driver_data = MT_CLS_EGALAX,
 		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
-			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
+	{ .driver_data = MT_CLS_EGALAX,
+		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) },
+	{ .driver_data = MT_CLS_EGALAX,
+		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
+	{ .driver_data = MT_CLS_EGALAX_SERIAL,
+		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
 
 	/* Elo TouchSystems IntelliTouch Plus panel */
 	{ .driver_data = MT_CLS_DUAL_NSMU_CONTACTID,
@@ -678,6 +747,11 @@
 		HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
 			USB_DEVICE_ID_GOODTOUCH_000f) },
 
+	/* Hanvon panels */
+	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
+		HID_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
+			USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
+
 	/* Ideacom panel */
 	{ .driver_data = MT_CLS_SERIAL,
 		HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
@@ -722,6 +796,17 @@
 		HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
 			USB_DEVICE_ID_PENMOUNT_PCI) },
 
+	/* PixArt optical touch screen */
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
+
 	/* PixCir-based panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
 		HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
@@ -730,6 +815,17 @@
 		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
 
+	/* Quanta-based panels */
+	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
+		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
+		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001) },
+	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
+		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008) },
+
 	/* Stantum panels */
 	{ .driver_data = MT_CLS_CONFIDENCE,
 		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
@@ -758,6 +854,35 @@
 		HID_USB_DEVICE(USB_VENDOR_ID_XAT,
 			USB_DEVICE_ID_XAT_CSR) },
 
+	/* Xiroku */
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_SPX) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_MPX) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_CSR) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_SPX1) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_MPX1) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_CSR1) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_SPX2) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_MPX2) },
+	{ .driver_data = MT_CLS_DEFAULT,
+		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+			USB_DEVICE_ID_XIROKU_CSR2) },
+
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, mt_devices);
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 1782693..12f9777 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -36,6 +36,7 @@
 
 #include <linux/completion.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #define PICOLCD_NAME "PicoLCD (graphic)"
 
@@ -632,7 +633,7 @@
 	struct picolcd_fb_cleanup_item *next;
 };
 static struct picolcd_fb_cleanup_item *fb_pending;
-DEFINE_SPINLOCK(fb_pending_lock);
+static DEFINE_SPINLOCK(fb_pending_lock);
 
 static void picolcd_fb_do_cleanup(struct work_struct *data)
 {
@@ -657,7 +658,7 @@
 	} while (item);
 }
 
-DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup);
+static DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup);
 
 static int picolcd_fb_open(struct fb_info *info, int u)
 {
diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c
index 06e5300..070f93a 100644
--- a/drivers/hid/hid-pl.c
+++ b/drivers/hid/hid-pl.c
@@ -40,6 +40,7 @@
 
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
 
diff --git a/drivers/hid/hid-quanta.c b/drivers/hid/hid-quanta.c
deleted file mode 100644
index 87a54df..0000000
--- a/drivers/hid/hid-quanta.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- *  HID driver for Quanta Optical Touch dual-touch panels
- *
- *  Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
-MODULE_DESCRIPTION("Quanta dual-touch panel");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-struct quanta_data {
-	__u16 x, y;
-	__u8 id;
-	bool valid;		/* valid finger data, or just placeholder? */
-	bool first;		/* is this the first finger in this frame? */
-	bool activity_now;	/* at least one active finger in this frame? */
-	bool activity;		/* at least one active finger previously? */
-};
-
-static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
-		struct hid_field *field, struct hid_usage *usage,
-		unsigned long **bit, int *max)
-{
-	switch (usage->hid & HID_USAGE_PAGE) {
-
-	case HID_UP_GENDESK:
-		switch (usage->hid) {
-		case HID_GD_X:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_POSITION_X);
-			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_X,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
-			return 1;
-		case HID_GD_Y:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_POSITION_Y);
-			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_Y,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
-			return 1;
-		}
-		return 0;
-
-	case HID_UP_DIGITIZER:
-		switch (usage->hid) {
-		case HID_DG_CONFIDENCE:
-		case HID_DG_TIPSWITCH:
-		case HID_DG_INPUTMODE:
-		case HID_DG_DEVICEINDEX:
-		case HID_DG_CONTACTCOUNT:
-		case HID_DG_CONTACTMAX:
-		case HID_DG_TIPPRESSURE:
-		case HID_DG_WIDTH:
-		case HID_DG_HEIGHT:
-			return -1;
-		case HID_DG_INRANGE:
-			/* touchscreen emulation */
-			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
-			return 1;
-		case HID_DG_CONTACTID:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
-			return 1;
-		}
-		return 0;
-
-	case 0xff000000:
-		/* ignore vendor-specific features */
-		return -1;
-	}
-
-	return 0;
-}
-
-static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
-		struct hid_field *field, struct hid_usage *usage,
-		unsigned long **bit, int *max)
-{
-	if (usage->type == EV_KEY || usage->type == EV_ABS)
-		clear_bit(usage->code, *bit);
-
-	return 0;
-}
-
-/*
- * this function is called when a whole finger has been parsed,
- * so that it can decide what to send to the input layer.
- */
-static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
-{
-	
-	td->first = !td->first; /* touchscreen emulation */
-
-	if (!td->valid) {
-		/*
-		 * touchscreen emulation: if no finger in this frame is valid
-		 * and there previously was finger activity, this is a release
-		 */ 
-		if (!td->first && !td->activity_now && td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 0);
-			td->activity = false;
-		}
-		return;
-	}
-
-	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
-	input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
-	input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
-
-	input_mt_sync(input);
-	td->valid = false;
-
-	/* touchscreen emulation: if first active finger in this frame... */
-	if (!td->activity_now) {
-		/* if there was no previous activity, emit touch event */
-		if (!td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 1);
-			td->activity = true;
-		}
-		td->activity_now = true;
-		/* and in any case this is our preferred finger */
-		input_event(input, EV_ABS, ABS_X, td->x);
-		input_event(input, EV_ABS, ABS_Y, td->y);
-	}
-}
-
-
-static int quanta_event(struct hid_device *hid, struct hid_field *field,
-				struct hid_usage *usage, __s32 value)
-{
-	struct quanta_data *td = hid_get_drvdata(hid);
-
-	if (hid->claimed & HID_CLAIMED_INPUT) {
-		struct input_dev *input = field->hidinput->input;
-
-		switch (usage->hid) {
-		case HID_DG_INRANGE:
-			td->valid = !!value;
-			break;
-		case HID_GD_X:
-			td->x = value;
-			break;
-		case HID_GD_Y:
-			td->y = value;
-			quanta_filter_event(td, input);
-			break;
-		case HID_DG_CONTACTID:
-			td->id = value;
-			break;
-		case HID_DG_CONTACTCOUNT:
-			/* touch emulation: this is the last field in a frame */
-			td->first = false;
-			td->activity_now = false;
-			break;
-		case HID_DG_CONFIDENCE:
-		case HID_DG_TIPSWITCH:
-			/* avoid interference from generic hidinput handling */
-			break;
-
-		default:
-			/* fallback to the generic hidinput handling */
-			return 0;
-		}
-	}
-
-	/* we have handled the hidinput part, now remains hiddev */
-	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
-		hid->hiddev_hid_event(hid, field, usage, value);
-
-	return 1;
-}
-
-static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
-{
-	int ret;
-	struct quanta_data *td;
-
-	td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
-	if (!td) {
-		hid_err(hdev, "cannot allocate Quanta Touch data\n");
-		return -ENOMEM;
-	}
-	td->valid = false;
-	td->activity = false;
-	td->activity_now = false;
-	td->first = false;
-	hid_set_drvdata(hdev, td);
-
-	ret = hid_parse(hdev);
-	if (!ret)
-		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
-	if (ret)
-		kfree(td);
-
-	return ret;
-}
-
-static void quanta_remove(struct hid_device *hdev)
-{
-	hid_hw_stop(hdev);
-	kfree(hid_get_drvdata(hdev));
-	hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id quanta_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
-			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
-			USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
-	{ }
-};
-MODULE_DEVICE_TABLE(hid, quanta_devices);
-
-static const struct hid_usage_id quanta_grabbed_usages[] = {
-	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
-	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver quanta_driver = {
-	.name = "quanta-touch",
-	.id_table = quanta_devices,
-	.probe = quanta_probe,
-	.remove = quanta_remove,
-	.input_mapping = quanta_input_mapping,
-	.input_mapped = quanta_input_mapped,
-	.usage_table = quanta_grabbed_usages,
-	.event = quanta_event,
-};
-
-static int __init quanta_init(void)
-{
-	return hid_register_driver(&quanta_driver);
-}
-
-static void __exit quanta_exit(void)
-{
-	hid_unregister_driver(&quanta_driver);
-}
-
-module_init(quanta_init);
-module_exit(quanta_exit);
-
diff --git a/drivers/hid/hid-roccat-common.c b/drivers/hid/hid-roccat-common.c
index edf898d..a6d9399 100644
--- a/drivers/hid/hid-roccat-common.c
+++ b/drivers/hid/hid-roccat-common.c
@@ -13,6 +13,7 @@
 
 #include <linux/hid.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "hid-roccat-common.h"
 
 static inline uint16_t roccat_common_feature_report(uint8_t report_id)
@@ -48,12 +49,10 @@
 	char *buf;
 	int len;
 
-	buf = kmalloc(size, GFP_KERNEL);
+	buf = kmemdup(data, size, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
-	memcpy(buf, data, size);
-
 	len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
 			HID_REQ_SET_REPORT,
 			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
diff --git a/drivers/hid/hid-roccat-isku.c b/drivers/hid/hid-roccat-isku.c
new file mode 100644
index 0000000..0e4a0ab
--- /dev/null
+++ b/drivers/hid/hid-roccat-isku.c
@@ -0,0 +1,487 @@
+/*
+ * Roccat Isku driver for Linux
+ *
+ * Copyright (c) 2011 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Isku is a gamer keyboard with macro keys that can be configured in
+ * 5 profiles.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/hid-roccat.h>
+#include "hid-ids.h"
+#include "hid-roccat-common.h"
+#include "hid-roccat-isku.h"
+
+static struct class *isku_class;
+
+static void isku_profile_activated(struct isku_device *isku, uint new_profile)
+{
+	isku->actual_profile = new_profile;
+}
+
+static int isku_receive(struct usb_device *usb_dev, uint command,
+		void *buf, uint size)
+{
+	return roccat_common_receive(usb_dev, command, buf, size);
+}
+
+static int isku_receive_control_status(struct usb_device *usb_dev)
+{
+	int retval;
+	struct isku_control control;
+
+	do {
+		msleep(50);
+		retval = isku_receive(usb_dev, ISKU_COMMAND_CONTROL,
+				&control, sizeof(struct isku_control));
+
+		if (retval)
+			return retval;
+
+		switch (control.value) {
+		case ISKU_CONTROL_VALUE_STATUS_OK:
+			return 0;
+		case ISKU_CONTROL_VALUE_STATUS_WAIT:
+			continue;
+		case ISKU_CONTROL_VALUE_STATUS_INVALID:
+		/* seems to be critical - replug necessary */
+		case ISKU_CONTROL_VALUE_STATUS_OVERLOAD:
+			return -EINVAL;
+		default:
+			hid_err(usb_dev, "isku_receive_control_status: "
+					"unknown response value 0x%x\n",
+					control.value);
+			return -EINVAL;
+		}
+
+	} while (1);
+}
+
+static int isku_send(struct usb_device *usb_dev, uint command,
+		void const *buf, uint size)
+{
+	int retval;
+
+	retval = roccat_common_send(usb_dev, command, buf, size);
+	if (retval)
+		return retval;
+
+	return isku_receive_control_status(usb_dev);
+}
+
+static int isku_get_actual_profile(struct usb_device *usb_dev)
+{
+	struct isku_actual_profile buf;
+	int retval;
+
+	retval = isku_receive(usb_dev, ISKU_COMMAND_ACTUAL_PROFILE,
+			&buf, sizeof(struct isku_actual_profile));
+	return retval ? retval : buf.actual_profile;
+}
+
+static int isku_set_actual_profile(struct usb_device *usb_dev, int new_profile)
+{
+	struct isku_actual_profile buf;
+
+	buf.command = ISKU_COMMAND_ACTUAL_PROFILE;
+	buf.size = sizeof(struct isku_actual_profile);
+	buf.actual_profile = new_profile;
+	return isku_send(usb_dev, ISKU_COMMAND_ACTUAL_PROFILE, &buf,
+			sizeof(struct isku_actual_profile));
+}
+
+static ssize_t isku_sysfs_show_actual_profile(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct isku_device *isku =
+			hid_get_drvdata(dev_get_drvdata(dev->parent->parent));
+	return snprintf(buf, PAGE_SIZE, "%d\n", isku->actual_profile);
+}
+
+static ssize_t isku_sysfs_set_actual_profile(struct device *dev,
+		struct device_attribute *attr, char const *buf, size_t size)
+{
+	struct isku_device *isku;
+	struct usb_device *usb_dev;
+	unsigned long profile;
+	int retval;
+	struct isku_roccat_report roccat_report;
+
+	dev = dev->parent->parent;
+	isku = hid_get_drvdata(dev_get_drvdata(dev));
+	usb_dev = interface_to_usbdev(to_usb_interface(dev));
+
+	retval = strict_strtoul(buf, 10, &profile);
+	if (retval)
+		return retval;
+
+	if (profile > 4)
+		return -EINVAL;
+
+	mutex_lock(&isku->isku_lock);
+
+	retval = isku_set_actual_profile(usb_dev, profile);
+	if (retval) {
+		mutex_unlock(&isku->isku_lock);
+		return retval;
+	}
+
+	isku_profile_activated(isku, profile);
+
+	roccat_report.event = ISKU_REPORT_BUTTON_EVENT_PROFILE;
+	roccat_report.data1 = profile + 1;
+	roccat_report.data2 = 0;
+	roccat_report.profile = profile + 1;
+	roccat_report_event(isku->chrdev_minor, (uint8_t const *)&roccat_report);
+
+	mutex_unlock(&isku->isku_lock);
+
+	return size;
+}
+
+static struct device_attribute isku_attributes[] = {
+	__ATTR(actual_profile, 0660,
+			isku_sysfs_show_actual_profile,
+			isku_sysfs_set_actual_profile),
+	__ATTR_NULL
+};
+
+static ssize_t isku_sysfs_read(struct file *fp, struct kobject *kobj,
+		char *buf, loff_t off, size_t count,
+		size_t real_size, uint command)
+{
+	struct device *dev =
+			container_of(kobj, struct device, kobj)->parent->parent;
+	struct isku_device *isku = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval;
+
+	if (off >= real_size)
+		return 0;
+
+	if (off != 0 || count != real_size)
+		return -EINVAL;
+
+	mutex_lock(&isku->isku_lock);
+	retval = isku_receive(usb_dev, command, buf, real_size);
+	mutex_unlock(&isku->isku_lock);
+
+	return retval ? retval : real_size;
+}
+
+static ssize_t isku_sysfs_write(struct file *fp, struct kobject *kobj,
+		void const *buf, loff_t off, size_t count,
+		size_t real_size, uint command)
+{
+	struct device *dev =
+			container_of(kobj, struct device, kobj)->parent->parent;
+	struct isku_device *isku = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval;
+
+	if (off != 0 || count != real_size)
+		return -EINVAL;
+
+	mutex_lock(&isku->isku_lock);
+	retval = isku_send(usb_dev, command, (void *)buf, real_size);
+	mutex_unlock(&isku->isku_lock);
+
+	return retval ? retval : real_size;
+}
+
+#define ISKU_SYSFS_W(thingy, THINGY) \
+static ssize_t isku_sysfs_write_ ## thingy(struct file *fp, struct kobject *kobj, \
+		struct bin_attribute *attr, char *buf, \
+		loff_t off, size_t count) \
+{ \
+	return isku_sysfs_write(fp, kobj, buf, off, count, \
+			sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+}
+
+#define ISKU_SYSFS_R(thingy, THINGY) \
+static ssize_t isku_sysfs_read_ ## thingy(struct file *fp, struct kobject *kobj, \
+		struct bin_attribute *attr, char *buf, \
+		loff_t off, size_t count) \
+{ \
+	return isku_sysfs_read(fp, kobj, buf, off, count, \
+			sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+}
+
+#define ISKU_SYSFS_RW(thingy, THINGY) \
+ISKU_SYSFS_R(thingy, THINGY) \
+ISKU_SYSFS_W(thingy, THINGY)
+
+#define ISKU_BIN_ATTR_RW(thingy) \
+{ \
+	.attr = { .name = #thingy, .mode = 0660 }, \
+	.size = sizeof(struct isku_ ## thingy), \
+	.read = isku_sysfs_read_ ## thingy, \
+	.write = isku_sysfs_write_ ## thingy \
+}
+
+#define ISKU_BIN_ATTR_R(thingy) \
+{ \
+	.attr = { .name = #thingy, .mode = 0440 }, \
+	.size = sizeof(struct isku_ ## thingy), \
+	.read = isku_sysfs_read_ ## thingy, \
+}
+
+#define ISKU_BIN_ATTR_W(thingy) \
+{ \
+	.attr = { .name = #thingy, .mode = 0220 }, \
+	.size = sizeof(struct isku_ ## thingy), \
+	.write = isku_sysfs_write_ ## thingy \
+}
+
+ISKU_SYSFS_RW(macro, MACRO)
+ISKU_SYSFS_RW(keys_function, KEYS_FUNCTION)
+ISKU_SYSFS_RW(keys_easyzone, KEYS_EASYZONE)
+ISKU_SYSFS_RW(keys_media, KEYS_MEDIA)
+ISKU_SYSFS_RW(keys_thumbster, KEYS_THUMBSTER)
+ISKU_SYSFS_RW(keys_macro, KEYS_MACRO)
+ISKU_SYSFS_RW(keys_capslock, KEYS_CAPSLOCK)
+ISKU_SYSFS_RW(light, LIGHT)
+ISKU_SYSFS_RW(key_mask, KEY_MASK)
+ISKU_SYSFS_RW(last_set, LAST_SET)
+ISKU_SYSFS_W(talk, TALK)
+ISKU_SYSFS_R(info, INFO)
+ISKU_SYSFS_W(control, CONTROL)
+
+static struct bin_attribute isku_bin_attributes[] = {
+	ISKU_BIN_ATTR_RW(macro),
+	ISKU_BIN_ATTR_RW(keys_function),
+	ISKU_BIN_ATTR_RW(keys_easyzone),
+	ISKU_BIN_ATTR_RW(keys_media),
+	ISKU_BIN_ATTR_RW(keys_thumbster),
+	ISKU_BIN_ATTR_RW(keys_macro),
+	ISKU_BIN_ATTR_RW(keys_capslock),
+	ISKU_BIN_ATTR_RW(light),
+	ISKU_BIN_ATTR_RW(key_mask),
+	ISKU_BIN_ATTR_RW(last_set),
+	ISKU_BIN_ATTR_W(talk),
+	ISKU_BIN_ATTR_R(info),
+	ISKU_BIN_ATTR_W(control),
+	__ATTR_NULL
+};
+
+static int isku_init_isku_device_struct(struct usb_device *usb_dev,
+		struct isku_device *isku)
+{
+	int retval;
+
+	mutex_init(&isku->isku_lock);
+
+	retval = isku_get_actual_profile(usb_dev);
+	if (retval < 0)
+		return retval;
+	isku_profile_activated(isku, retval);
+
+	return 0;
+}
+
+static int isku_init_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct isku_device *isku;
+	int retval;
+
+	if (intf->cur_altsetting->desc.bInterfaceProtocol
+			!= ISKU_USB_INTERFACE_PROTOCOL) {
+		hid_set_drvdata(hdev, NULL);
+		return 0;
+	}
+
+	isku = kzalloc(sizeof(*isku), GFP_KERNEL);
+	if (!isku) {
+		hid_err(hdev, "can't alloc device descriptor\n");
+		return -ENOMEM;
+	}
+	hid_set_drvdata(hdev, isku);
+
+	retval = isku_init_isku_device_struct(usb_dev, isku);
+	if (retval) {
+		hid_err(hdev, "couldn't init struct isku_device\n");
+		goto exit_free;
+	}
+
+	retval = roccat_connect(isku_class, hdev,
+			sizeof(struct isku_roccat_report));
+	if (retval < 0) {
+		hid_err(hdev, "couldn't init char dev\n");
+	} else {
+		isku->chrdev_minor = retval;
+		isku->roccat_claimed = 1;
+	}
+
+	return 0;
+exit_free:
+	kfree(isku);
+	return retval;
+}
+
+static void isku_remove_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct isku_device *isku;
+
+	if (intf->cur_altsetting->desc.bInterfaceProtocol
+			!= ISKU_USB_INTERFACE_PROTOCOL)
+		return;
+
+	isku = hid_get_drvdata(hdev);
+	if (isku->roccat_claimed)
+		roccat_disconnect(isku->chrdev_minor);
+	kfree(isku);
+}
+
+static int isku_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	int retval;
+
+	retval = hid_parse(hdev);
+	if (retval) {
+		hid_err(hdev, "parse failed\n");
+		goto exit;
+	}
+
+	retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (retval) {
+		hid_err(hdev, "hw start failed\n");
+		goto exit;
+	}
+
+	retval = isku_init_specials(hdev);
+	if (retval) {
+		hid_err(hdev, "couldn't install keyboard\n");
+		goto exit_stop;
+	}
+
+	return 0;
+
+exit_stop:
+	hid_hw_stop(hdev);
+exit:
+	return retval;
+}
+
+static void isku_remove(struct hid_device *hdev)
+{
+	isku_remove_specials(hdev);
+	hid_hw_stop(hdev);
+}
+
+static void isku_keep_values_up_to_date(struct isku_device *isku,
+		u8 const *data)
+{
+	struct isku_report_button const *button_report;
+
+	switch (data[0]) {
+	case ISKU_REPORT_NUMBER_BUTTON:
+		button_report = (struct isku_report_button const *)data;
+		switch (button_report->event) {
+		case ISKU_REPORT_BUTTON_EVENT_PROFILE:
+			isku_profile_activated(isku, button_report->data1 - 1);
+			break;
+		}
+		break;
+	}
+}
+
+static void isku_report_to_chrdev(struct isku_device const *isku,
+		u8 const *data)
+{
+	struct isku_roccat_report roccat_report;
+	struct isku_report_button const *button_report;
+
+	if (data[0] != ISKU_REPORT_NUMBER_BUTTON)
+		return;
+
+	button_report = (struct isku_report_button const *)data;
+
+	roccat_report.event = button_report->event;
+	roccat_report.data1 = button_report->data1;
+	roccat_report.data2 = button_report->data2;
+	roccat_report.profile = isku->actual_profile + 1;
+	roccat_report_event(isku->chrdev_minor,
+			(uint8_t const *)&roccat_report);
+}
+
+static int isku_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct isku_device *isku = hid_get_drvdata(hdev);
+
+	if (intf->cur_altsetting->desc.bInterfaceProtocol
+			!= ISKU_USB_INTERFACE_PROTOCOL)
+		return 0;
+
+	if (isku == NULL)
+		return 0;
+
+	isku_keep_values_up_to_date(isku, data);
+
+	if (isku->roccat_claimed)
+		isku_report_to_chrdev(isku, data);
+
+	return 0;
+}
+
+static const struct hid_device_id isku_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, isku_devices);
+
+static struct hid_driver isku_driver = {
+		.name = "isku",
+		.id_table = isku_devices,
+		.probe = isku_probe,
+		.remove = isku_remove,
+		.raw_event = isku_raw_event
+};
+
+static int __init isku_init(void)
+{
+	int retval;
+	isku_class = class_create(THIS_MODULE, "isku");
+	if (IS_ERR(isku_class))
+		return PTR_ERR(isku_class);
+	isku_class->dev_attrs = isku_attributes;
+	isku_class->dev_bin_attrs = isku_bin_attributes;
+
+	retval = hid_register_driver(&isku_driver);
+	if (retval)
+		class_destroy(isku_class);
+	return retval;
+}
+
+static void __exit isku_exit(void)
+{
+	hid_unregister_driver(&isku_driver);
+	class_destroy(isku_class);
+}
+
+module_init(isku_init);
+module_exit(isku_exit);
+
+MODULE_AUTHOR("Stefan Achatz");
+MODULE_DESCRIPTION("USB Roccat Isku driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hid/hid-roccat-isku.h b/drivers/hid/hid-roccat-isku.h
new file mode 100644
index 0000000..075f6ef
--- /dev/null
+++ b/drivers/hid/hid-roccat-isku.h
@@ -0,0 +1,147 @@
+#ifndef __HID_ROCCAT_ISKU_H
+#define __HID_ROCCAT_ISKU_H
+
+/*
+ * Copyright (c) 2011 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+enum {
+	ISKU_PROFILE_NUM = 5,
+	ISKU_USB_INTERFACE_PROTOCOL = 0,
+};
+
+struct isku_control {
+	uint8_t command; /* ISKU_COMMAND_CONTROL */
+	uint8_t value;
+	uint8_t request;
+} __packed;
+
+enum isku_control_values {
+	ISKU_CONTROL_VALUE_STATUS_OVERLOAD = 0,
+	ISKU_CONTROL_VALUE_STATUS_OK = 1,
+	ISKU_CONTROL_VALUE_STATUS_INVALID = 2,
+	ISKU_CONTROL_VALUE_STATUS_WAIT = 3,
+};
+
+struct isku_actual_profile {
+	uint8_t command; /* ISKU_COMMAND_ACTUAL_PROFILE */
+	uint8_t size; /* always 3 */
+	uint8_t actual_profile;
+} __packed;
+
+struct isku_key_mask {
+	uint8_t command; /* ISKU_COMMAND_KEY_MASK */
+	uint8_t size; /* 6 */
+	uint8_t profile_number; /* 0-4 */
+	uint8_t mask;
+	uint16_t checksum;
+} __packed;
+
+struct isku_keys_function {
+	uint8_t data[0x29];
+} __packed;
+
+struct isku_keys_easyzone {
+	uint8_t data[0x41];
+} __packed;
+
+struct isku_keys_media {
+	uint8_t data[0x1d];
+} __packed;
+
+struct isku_keys_thumbster {
+	uint8_t data[0x17];
+} __packed;
+
+struct isku_keys_macro {
+	uint8_t data[0x23];
+} __packed;
+
+struct isku_keys_capslock {
+	uint8_t data[0x6];
+} __packed;
+
+struct isku_macro {
+	uint8_t data[0x823];
+} __packed;
+
+struct isku_light {
+	uint8_t data[0xa];
+} __packed;
+
+struct isku_info {
+	uint8_t data[2];
+	uint8_t firmware_version;
+	uint8_t unknown[3];
+} __packed;
+
+struct isku_talk {
+	uint8_t data[0x10];
+} __packed;
+
+struct isku_last_set {
+	uint8_t data[0x14];
+} __packed;
+
+enum isku_commands {
+	ISKU_COMMAND_CONTROL = 0x4,
+	ISKU_COMMAND_ACTUAL_PROFILE = 0x5,
+	ISKU_COMMAND_KEY_MASK = 0x7,
+	ISKU_COMMAND_KEYS_FUNCTION = 0x8,
+	ISKU_COMMAND_KEYS_EASYZONE = 0x9,
+	ISKU_COMMAND_KEYS_MEDIA = 0xa,
+	ISKU_COMMAND_KEYS_THUMBSTER = 0xb,
+	ISKU_COMMAND_KEYS_MACRO = 0xd,
+	ISKU_COMMAND_MACRO = 0xe,
+	ISKU_COMMAND_INFO = 0xf,
+	ISKU_COMMAND_LIGHT = 0x10,
+	ISKU_COMMAND_KEYS_CAPSLOCK = 0x13,
+	ISKU_COMMAND_LAST_SET = 0x14,
+	ISKU_COMMAND_15 = 0x15,
+	ISKU_COMMAND_TALK = 0x16,
+	ISKU_COMMAND_FIRMWARE_WRITE = 0x1b,
+	ISKU_COMMAND_FIRMWARE_WRITE_CONTROL = 0x1c,
+};
+
+struct isku_report_button {
+	uint8_t number; /* ISKU_REPORT_NUMBER_BUTTON */
+	uint8_t zero;
+	uint8_t event;
+	uint8_t data1;
+	uint8_t data2;
+};
+
+enum isku_report_numbers {
+	ISKU_REPORT_NUMBER_BUTTON = 3,
+};
+
+enum isku_report_button_events {
+	ISKU_REPORT_BUTTON_EVENT_PROFILE = 0x2,
+};
+
+struct isku_roccat_report {
+	uint8_t event;
+	uint8_t data1;
+	uint8_t data2;
+	uint8_t profile;
+} __packed;
+
+struct isku_device {
+	int roccat_claimed;
+	int chrdev_minor;
+
+	struct mutex isku_lock;
+
+	int actual_profile;
+};
+
+#endif
diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
index e2072af..40090d6 100644
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -78,12 +78,10 @@
 	char *buf;
 	int len;
 
-	buf = kmalloc(size, GFP_KERNEL);
+	buf = kmemdup(data, size, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
-	memcpy(buf, data, size);
-
 	len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
 			HID_REQ_SET_REPORT,
 			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 56ce12c..b685b04 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -27,6 +27,7 @@
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/hid-roccat.h>
+#include <linux/module.h>
 
 #define ROCCAT_FIRST_MINOR 0
 #define ROCCAT_MAX_DEVICES 8
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
index 670da91..4b14486 100644
--- a/drivers/hid/hid-sjoy.c
+++ b/drivers/hid/hid-sjoy.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
+#include <linux/module.h>
 #include "hid-ids.h"
 
 #ifdef CONFIG_SMARTJOYPLUS_FF
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 575862b..83a933b 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -31,6 +31,7 @@
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 
 #include "hid-ids.h"
 
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 17bb88f..f218348 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -9,6 +9,7 @@
  *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
  *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
  *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
+ *  Copyright (c) 2011 Przemysław Firszt <przemo@firszt.eu>
  */
 
 /*
@@ -33,6 +34,7 @@
 struct wacom_data {
 	__u16 tool;
 	unsigned char butstate;
+	__u8 features;
 	unsigned char high_speed;
 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	int battery_capacity;
@@ -107,6 +109,19 @@
 }
 #endif
 
+static void wacom_set_features(struct hid_device *hdev)
+{
+	int ret;
+	__u8 rep_data[2];
+
+	/*set high speed, tablet mode*/
+	rep_data[0] = 0x03;
+	rep_data[1] = 0x20;
+	ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	return;
+}
+
 static void wacom_poke(struct hid_device *hdev, u8 speed)
 {
 	struct wacom_data *wdata = hid_get_drvdata(hdev);
@@ -177,26 +192,13 @@
 static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP,
 		wacom_show_speed, wacom_store_speed);
 
-static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
-		u8 *raw_data, int size)
+static int wacom_gr_parse_report(struct hid_device *hdev,
+			struct wacom_data *wdata,
+			struct input_dev *input, unsigned char *data)
 {
-	struct wacom_data *wdata = hid_get_drvdata(hdev);
-	struct hid_input *hidinput;
-	struct input_dev *input;
-	unsigned char *data = (unsigned char *) raw_data;
 	int tool, x, y, rw;
 
-	if (!(hdev->claimed & HID_CLAIMED_INPUT))
-		return 0;
-
 	tool = 0;
-	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
-	input = hidinput->input;
-
-	/* Check if this is a tablet report */
-	if (data[0] != 0x03)
-		return 0;
-
 	/* Get X & Y positions */
 	x = le16_to_cpu(*(__le16 *) &data[2]);
 	y = le16_to_cpu(*(__le16 *) &data[4]);
@@ -304,6 +306,121 @@
 	return 1;
 }
 
+static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
+			struct input_dev *input, unsigned char *data)
+{
+	__u16 x, y, pressure;
+	__u32 id;
+
+	switch (data[1]) {
+	case 0x80: /* Out of proximity report */
+		wdata->tool = 0;
+		input_report_key(input, BTN_TOUCH, 0);
+		input_report_abs(input, ABS_PRESSURE, 0);
+		input_report_key(input, wdata->tool, 0);
+		input_sync(input);
+		break;
+	case 0xC2: /* Tool report */
+		id = ((data[2] << 4) | (data[3] >> 4) |
+			((data[7] & 0x0f) << 20) |
+			((data[8] & 0xf0) << 12)) & 0xfffff;
+
+		switch (id) {
+		case 0x802:
+			wdata->tool = BTN_TOOL_PEN;
+			break;
+		case 0x80A:
+			wdata->tool = BTN_TOOL_RUBBER;
+			break;
+		}
+		break;
+	default: /* Position/pressure report */
+		x = data[2] << 9 | data[3] << 1 | ((data[9] & 0x02) >> 1);
+		y = data[4] << 9 | data[5] << 1 | (data[9] & 0x01);
+		pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5)
+			| (data[1] & 0x01);
+
+		input_report_key(input, BTN_TOUCH, pressure > 1);
+
+		input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+		input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
+		input_report_key(input, wdata->tool, 1);
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+		input_report_abs(input, ABS_PRESSURE, pressure);
+		input_sync(input);
+		break;
+	}
+
+	return;
+}
+
+static void wacom_i4_parse_report(struct hid_device *hdev,
+			struct wacom_data *wdata,
+			struct input_dev *input, unsigned char *data)
+{
+	switch (data[0]) {
+	case 0x00: /* Empty report */
+		break;
+	case 0x02: /* Pen report */
+		wacom_i4_parse_pen_report(wdata, input, data);
+		break;
+	case 0x03: /* Features Report */
+		wdata->features = data[2];
+		break;
+	case 0x0C: /* Button report */
+		break;
+	default:
+		hid_err(hdev, "Unknown report: %d,%d\n", data[0], data[1]);
+		break;
+	}
+}
+
+static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *raw_data, int size)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	unsigned char *data = (unsigned char *) raw_data;
+	int i;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Check if this is a tablet report */
+	if (data[0] != 0x03)
+		return 0;
+
+	switch (hdev->product) {
+	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
+		return wacom_gr_parse_report(hdev, wdata, input, data);
+		break;
+	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
+		i = 1;
+
+		switch (data[0]) {
+		case 0x04:
+			wacom_i4_parse_report(hdev, wdata, input, data + i);
+			i += 10;
+			/* fall through */
+		case 0x03:
+			wacom_i4_parse_report(hdev, wdata, input, data + i);
+			i += 10;
+			wacom_i4_parse_report(hdev, wdata, input, data + i);
+			break;
+		default:
+			hid_err(hdev, "Unknown report: %d,%d size:%d\n",
+					data[0], data[1], size);
+			return 0;
+		}
+	}
+	return 1;
+}
+
 static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 	struct hid_field *field, struct hid_usage *usage, unsigned long **bit,
 								int *max)
@@ -338,10 +455,19 @@
 	__set_bit(BTN_TOOL_RUBBER, input->keybit);
 	__set_bit(BTN_TOOL_MOUSE, input->keybit);
 
-	input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
-	input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
-	input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
-	input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
+	switch (hdev->product) {
+	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
+		input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
+		input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
+		input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
+		input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
+		break;
+	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
+		input_set_abs_params(input, ABS_X, 0, 40640, 4, 0);
+		input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0);
+		input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0);
+		break;
+	}
 
 	return 0;
 }
@@ -378,8 +504,16 @@
 		hid_warn(hdev,
 			 "can't create sysfs speed attribute err: %d\n", ret);
 
-	/* Set Wacom mode 2 with high reporting speed */
-	wacom_poke(hdev, 1);
+	switch (hdev->product) {
+	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
+		/* Set Wacom mode 2 with high reporting speed */
+		wacom_poke(hdev, 1);
+		break;
+	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
+		wdata->features = 0;
+		wacom_set_features(hdev);
+		break;
+	}
 
 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	wdata->battery.properties = wacom_battery_props;
@@ -441,6 +575,7 @@
 
 static const struct hid_device_id wacom_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
 
 	{ }
 };
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index f31fab0..f6ba81d 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -25,6 +25,7 @@
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 
 #include "hid-ids.h"
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index b403fce..5bf91db 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -197,16 +197,24 @@
 {
 	struct hid_device *hid = usb_get_intfdata(usbhid->intf);
 	int kicked;
+	int r;
 
 	if (!hid)
 		return 0;
 
 	if ((kicked = (usbhid->outhead != usbhid->outtail))) {
 		dbg("Kicking head %d tail %d", usbhid->outhead, usbhid->outtail);
+
+		r = usb_autopm_get_interface_async(usbhid->intf);
+		if (r < 0)
+			return r;
+		/* Asynchronously flush queue. */
+		set_bit(HID_OUT_RUNNING, &usbhid->iofl);
 		if (hid_submit_out(hid)) {
 			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-			wake_up(&usbhid->wait);
+			usb_autopm_put_interface_async(usbhid->intf);
 		}
+		wake_up(&usbhid->wait);
 	}
 	return kicked;
 }
@@ -215,6 +223,7 @@
 {
 	struct hid_device *hid = usb_get_intfdata(usbhid->intf);
 	int kicked;
+	int r;
 
 	WARN_ON(hid == NULL);
 	if (!hid)
@@ -222,10 +231,17 @@
 
 	if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) {
 		dbg("Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail);
+
+		r = usb_autopm_get_interface_async(usbhid->intf);
+		if (r < 0)
+			return r;
+		/* Asynchronously flush queue. */
+		set_bit(HID_CTRL_RUNNING, &usbhid->iofl);
 		if (hid_submit_ctrl(hid)) {
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-			wake_up(&usbhid->wait);
+			usb_autopm_put_interface_async(usbhid->intf);
 		}
+		wake_up(&usbhid->wait);
 	}
 	return kicked;
 }
@@ -304,30 +320,21 @@
 	report = usbhid->out[usbhid->outtail].report;
 	raw_report = usbhid->out[usbhid->outtail].raw_report;
 
-	r = usb_autopm_get_interface_async(usbhid->intf);
-	if (r < 0)
-		return -1;
+	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) +
+						 1 + (report->id > 0);
+	usbhid->urbout->dev = hid_to_usb_dev(hid);
+	memcpy(usbhid->outbuf, raw_report,
+	       usbhid->urbout->transfer_buffer_length);
+	kfree(raw_report);
 
-	/*
-	 * if the device hasn't been woken, we leave the output
-	 * to resume()
-	 */
-	if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
-		usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-		usbhid->urbout->dev = hid_to_usb_dev(hid);
-		memcpy(usbhid->outbuf, raw_report, usbhid->urbout->transfer_buffer_length);
-		kfree(raw_report);
+	dbg_hid("submitting out urb\n");
 
-		dbg_hid("submitting out urb\n");
-
-		if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
-			hid_err(hid, "usb_submit_urb(out) failed\n");
-			usb_autopm_put_interface_async(usbhid->intf);
-			return -1;
-		}
-		usbhid->last_out = jiffies;
+	r = usb_submit_urb(usbhid->urbout, GFP_ATOMIC);
+	if (r < 0) {
+		hid_err(hid, "usb_submit_urb(out) failed: %d\n", r);
+		return r;
 	}
-
+	usbhid->last_out = jiffies;
 	return 0;
 }
 
@@ -343,50 +350,48 @@
 	raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
 	dir = usbhid->ctrl[usbhid->ctrltail].dir;
 
-	r = usb_autopm_get_interface_async(usbhid->intf);
-	if (r < 0)
-		return -1;
-	if (!test_bit(HID_REPORTED_IDLE, &usbhid->iofl)) {
-		len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-		if (dir == USB_DIR_OUT) {
-			usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
-			usbhid->urbctrl->transfer_buffer_length = len;
-			memcpy(usbhid->ctrlbuf, raw_report, len);
-			kfree(raw_report);
-		} else {
-			int maxpacket, padlen;
+	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+	if (dir == USB_DIR_OUT) {
+		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
+		usbhid->urbctrl->transfer_buffer_length = len;
+		memcpy(usbhid->ctrlbuf, raw_report, len);
+		kfree(raw_report);
+	} else {
+		int maxpacket, padlen;
 
-			usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
-			maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
-			if (maxpacket > 0) {
-				padlen = DIV_ROUND_UP(len, maxpacket);
-				padlen *= maxpacket;
-				if (padlen > usbhid->bufsize)
-					padlen = usbhid->bufsize;
-			} else
-				padlen = 0;
-			usbhid->urbctrl->transfer_buffer_length = padlen;
-		}
-		usbhid->urbctrl->dev = hid_to_usb_dev(hid);
-
-		usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
-		usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
-		usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
-		usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
-		usbhid->cr->wLength = cpu_to_le16(len);
-
-		dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
-			usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
-			usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
-
-		if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
-			usb_autopm_put_interface_async(usbhid->intf);
-			hid_err(hid, "usb_submit_urb(ctrl) failed\n");
-			return -1;
-		}
-		usbhid->last_ctrl = jiffies;
+		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
+		maxpacket = usb_maxpacket(hid_to_usb_dev(hid),
+					  usbhid->urbctrl->pipe, 0);
+		if (maxpacket > 0) {
+			padlen = DIV_ROUND_UP(len, maxpacket);
+			padlen *= maxpacket;
+			if (padlen > usbhid->bufsize)
+				padlen = usbhid->bufsize;
+		} else
+			padlen = 0;
+		usbhid->urbctrl->transfer_buffer_length = padlen;
 	}
+	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
 
+	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
+	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT :
+						      HID_REQ_GET_REPORT;
+	usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) |
+					 report->id);
+	usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
+	usbhid->cr->wLength = cpu_to_le16(len);
+
+	dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
+		usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" :
+							     "Get_Report",
+		usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
+
+	r = usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC);
+	if (r < 0) {
+		hid_err(hid, "usb_submit_urb(ctrl) failed: %d\n", r);
+		return r;
+	}
+	usbhid->last_ctrl = jiffies;
 	return 0;
 }
 
@@ -423,11 +428,8 @@
 	else
 		usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
 
-	if (usbhid->outhead != usbhid->outtail) {
-		if (hid_submit_out(hid)) {
-			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-			wake_up(&usbhid->wait);
-		}
+	if (usbhid->outhead != usbhid->outtail && !hid_submit_out(hid)) {
+		/* Successfully submitted next urb in queue */
 		spin_unlock_irqrestore(&usbhid->lock, flags);
 		return;
 	}
@@ -474,13 +476,9 @@
 	else
 		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
 
-	if (usbhid->ctrlhead != usbhid->ctrltail) {
-		if (hid_submit_ctrl(hid)) {
-			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-			wake_up(&usbhid->wait);
-		}
+	if (usbhid->ctrlhead != usbhid->ctrltail && !hid_submit_ctrl(hid)) {
+		/* Successfully submitted next urb in queue */
 		spin_unlock(&usbhid->lock);
-		usb_autopm_put_interface_async(usbhid->intf);
 		return;
 	}
 
@@ -515,9 +513,23 @@
 		usbhid->out[usbhid->outhead].report = report;
 		usbhid->outhead = head;
 
+		/* Try to awake from autosuspend... */
+		if (usb_autopm_get_interface_async(usbhid->intf) < 0)
+			return;
+
+		/*
+		 * But if still suspended, leave urb enqueued, don't submit.
+		 * Submission will occur if/when resume() drains the queue.
+		 */
+		if (test_bit(HID_REPORTED_IDLE, &usbhid->iofl))
+			return;
+
 		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
-			if (hid_submit_out(hid))
+			if (hid_submit_out(hid)) {
 				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+				usb_autopm_put_interface_async(usbhid->intf);
+			}
+			wake_up(&usbhid->wait);
 		} else {
 			/*
 			 * the queue is known to run
@@ -549,9 +561,23 @@
 	usbhid->ctrl[usbhid->ctrlhead].dir = dir;
 	usbhid->ctrlhead = head;
 
+	/* Try to awake from autosuspend... */
+	if (usb_autopm_get_interface_async(usbhid->intf) < 0)
+		return;
+
+	/*
+	 * If already suspended, leave urb enqueued, but don't submit.
+	 * Submission will occur if/when resume() drains the queue.
+	 */
+	if (test_bit(HID_REPORTED_IDLE, &usbhid->iofl))
+		return;
+
 	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
-		if (hid_submit_ctrl(hid))
+		if (hid_submit_ctrl(hid)) {
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+			usb_autopm_put_interface_async(usbhid->intf);
+		}
+		wake_up(&usbhid->wait);
 	} else {
 		/*
 		 * the queue is known to run
@@ -576,6 +602,30 @@
 }
 EXPORT_SYMBOL_GPL(usbhid_submit_report);
 
+/* Workqueue routine to send requests to change LEDs */
+static void hid_led(struct work_struct *work)
+{
+	struct usbhid_device *usbhid =
+		container_of(work, struct usbhid_device, led_work);
+	struct hid_device *hid = usbhid->hid;
+	struct hid_field *field;
+	unsigned long flags;
+
+	field = hidinput_get_led_field(hid);
+	if (!field) {
+		hid_warn(hid, "LED event field not found\n");
+		return;
+	}
+
+	spin_lock_irqsave(&usbhid->lock, flags);
+	if (!test_bit(HID_DISCONNECTED, &usbhid->iofl)) {
+		usbhid->ledcount = hidinput_count_leds(hid);
+		hid_dbg(usbhid->hid, "New ledcount = %u\n", usbhid->ledcount);
+		__usbhid_submit_report(hid, field->report, USB_DIR_OUT);
+	}
+	spin_unlock_irqrestore(&usbhid->lock, flags);
+}
+
 static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct hid_device *hid = input_get_drvdata(dev);
@@ -595,17 +645,15 @@
 		return -1;
 	}
 
+	spin_lock_irqsave(&usbhid->lock, flags);
 	hid_set_field(field, offset, value);
-	if (value) {
-		spin_lock_irqsave(&usbhid->lock, flags);
-		usbhid->ledcount++;
-		spin_unlock_irqrestore(&usbhid->lock, flags);
-	} else {
-		spin_lock_irqsave(&usbhid->lock, flags);
-		usbhid->ledcount--;
-		spin_unlock_irqrestore(&usbhid->lock, flags);
-	}
-	usbhid_submit_report(hid, field->report, USB_DIR_OUT);
+	spin_unlock_irqrestore(&usbhid->lock, flags);
+
+	/*
+	 * Defer performing requested LED action.
+	 * This is more likely gather all LED changes into a single URB.
+	 */
+	schedule_work(&usbhid->led_work);
 
 	return 0;
 }
@@ -1100,7 +1148,7 @@
 		return;
 
 	clear_bit(HID_STARTED, &usbhid->iofl);
-	spin_lock_irq(&usbhid->lock);	/* Sync with error handler */
+	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 	usb_kill_urb(usbhid->urbin);
@@ -1234,6 +1282,8 @@
 	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
 	spin_lock_init(&usbhid->lock);
 
+	INIT_WORK(&usbhid->led_work, hid_led);
+
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)
@@ -1266,6 +1316,7 @@
 {
 	del_timer_sync(&usbhid->io_retry);
 	cancel_work_sync(&usbhid->reset_work);
+	cancel_work_sync(&usbhid->led_work);
 }
 
 static void hid_cease_io(struct usbhid_device *usbhid)
@@ -1367,16 +1418,6 @@
 			return -EIO;
 	}
 
-	if (!ignoreled && PMSG_IS_AUTO(message)) {
-		spin_lock_irq(&usbhid->lock);
-		if (test_bit(HID_LED_ON, &usbhid->iofl)) {
-			spin_unlock_irq(&usbhid->lock);
-			usbhid_mark_busy(usbhid);
-			return -EBUSY;
-		}
-		spin_unlock_irq(&usbhid->lock);
-	}
-
 	hid_cancel_delayed_stuff(usbhid);
 	hid_cease_io(usbhid);
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 4ea4641..c831af9 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/hid.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include "../hid-ids.h"
@@ -46,6 +47,7 @@
 
 	{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
 
+	{ USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
@@ -66,6 +68,9 @@
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 1673cac..cb8f703 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -55,7 +55,6 @@
 #define HID_STARTED		8
 #define HID_REPORTED_IDLE	9
 #define HID_KEYS_PRESSED	10
-#define HID_LED_ON		11
 
 /*
  * USB-specific HID struct, to be pointed to
@@ -97,6 +96,8 @@
 	struct work_struct reset_work;                                  /* Task context for resets */
 	wait_queue_head_t wait;						/* For sleeping */
 	int ledcount;							/* counting the number of active leds */
+
+	struct work_struct led_work;					/* Task context for setting LEDs */
 };
 
 #define	hid_to_usb_dev(hid_dev) \
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 0658173..a7b925a 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -64,6 +64,32 @@
 	150,158,159,128,136,177,178,176,142,152,173,140
 };
 
+
+/**
+ * struct usb_kbd - state of each attached keyboard
+ * @dev:	input device associated with this keyboard
+ * @usbdev:	usb device associated with this keyboard
+ * @old:	data received in the past from the @irq URB representing which
+ *		keys were pressed. By comparing with the current list of keys
+ *		that are pressed, we are able to see key releases.
+ * @irq:	URB for receiving a list of keys that are pressed when a
+ *		new key is pressed or a key that was pressed is released.
+ * @led:	URB for sending LEDs (e.g. numlock, ...)
+ * @newleds:	data that will be sent with the @led URB representing which LEDs
+ 		should be on
+ * @name:	Name of the keyboard. @dev's name field points to this buffer
+ * @phys:	Physical path of the keyboard. @dev's phys field points to this
+ *		buffer
+ * @new:	Buffer for the @irq URB
+ * @cr:		Control request for @led URB
+ * @leds:	Buffer for the @led URB
+ * @new_dma:	DMA address for @irq URB
+ * @leds_dma:	DMA address for @led URB
+ * @leds_lock:	spinlock that protects @leds, @newleds, and @led_urb_submitted
+ * @led_urb_submitted: indicates whether @led is in progress, i.e. it has been
+ *		submitted and its completion handler has not returned yet
+ *		without	resubmitting @led
+ */
 struct usb_kbd {
 	struct input_dev *dev;
 	struct usb_device *usbdev;
@@ -78,6 +104,10 @@
 	unsigned char *leds;
 	dma_addr_t new_dma;
 	dma_addr_t leds_dma;
+	
+	spinlock_t leds_lock;
+	bool led_urb_submitted;
+
 };
 
 static void usb_kbd_irq(struct urb *urb)
@@ -136,44 +166,66 @@
 static int usb_kbd_event(struct input_dev *dev, unsigned int type,
 			 unsigned int code, int value)
 {
+	unsigned long flags;
 	struct usb_kbd *kbd = input_get_drvdata(dev);
 
 	if (type != EV_LED)
 		return -1;
 
+	spin_lock_irqsave(&kbd->leds_lock, flags);
 	kbd->newleds = (!!test_bit(LED_KANA,    dev->led) << 3) | (!!test_bit(LED_COMPOSE, dev->led) << 3) |
 		       (!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_CAPSL,   dev->led) << 1) |
 		       (!!test_bit(LED_NUML,    dev->led));
 
-	if (kbd->led->status == -EINPROGRESS)
+	if (kbd->led_urb_submitted){
+		spin_unlock_irqrestore(&kbd->leds_lock, flags);
 		return 0;
+	}
 
-	if (*(kbd->leds) == kbd->newleds)
+	if (*(kbd->leds) == kbd->newleds){
+		spin_unlock_irqrestore(&kbd->leds_lock, flags);
 		return 0;
+	}
 
 	*(kbd->leds) = kbd->newleds;
+	
 	kbd->led->dev = kbd->usbdev;
 	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
 		pr_err("usb_submit_urb(leds) failed\n");
-
+	else
+		kbd->led_urb_submitted = true;
+	
+	spin_unlock_irqrestore(&kbd->leds_lock, flags);
+	
 	return 0;
 }
 
 static void usb_kbd_led(struct urb *urb)
 {
+	unsigned long flags;
 	struct usb_kbd *kbd = urb->context;
 
 	if (urb->status)
 		hid_warn(urb->dev, "led urb status %d received\n",
 			 urb->status);
 
-	if (*(kbd->leds) == kbd->newleds)
+	spin_lock_irqsave(&kbd->leds_lock, flags);
+
+	if (*(kbd->leds) == kbd->newleds){
+		kbd->led_urb_submitted = false;
+		spin_unlock_irqrestore(&kbd->leds_lock, flags);
 		return;
+	}
 
 	*(kbd->leds) = kbd->newleds;
+	
 	kbd->led->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
+	if (usb_submit_urb(kbd->led, GFP_ATOMIC)){
 		hid_err(urb->dev, "usb_submit_urb(leds) failed\n");
+		kbd->led_urb_submitted = false;
+	}
+	spin_unlock_irqrestore(&kbd->leds_lock, flags);
+	
 }
 
 static int usb_kbd_open(struct input_dev *dev)
@@ -252,6 +304,7 @@
 
 	kbd->usbdev = dev;
 	kbd->dev = input_dev;
+	spin_lock_init(&kbd->leds_lock);
 
 	if (dev->manufacturer)
 		strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
@@ -334,6 +387,7 @@
 	if (kbd) {
 		usb_kill_urb(kbd->irq);
 		input_unregister_device(kbd->dev);
+		usb_kill_urb(kbd->led);
 		usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
 		kfree(kbd);
 	}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9b347ac..91be41f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -315,7 +315,7 @@
 
 config SENSORS_EXYNOS4_TMU
 	tristate "Temperature sensor on Samsung EXYNOS4"
-	depends on EXYNOS4_DEV_TMU
+	depends on ARCH_EXYNOS4
 	help
 	  If you say yes here you get support for TMU (Thermal Managment
 	  Unit) on SAMSUNG EXYNOS4 series of SoC.
@@ -335,6 +335,7 @@
 
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+	depends on !PPC
 	help
 	  If you say yes here you get support for hardware monitoring
 	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
@@ -345,6 +346,7 @@
 
 config SENSORS_F71882FG
 	tristate "Fintek F71882FG and compatibles"
+	depends on !PPC
 	help
 	  If you say yes here you get support for hardware monitoring
 	  features of many Fintek Super-I/O (LPC) chips. The currently
@@ -468,6 +470,7 @@
 
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
+	depends on !PPC
 	select HWMON_VID
 	help
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
@@ -824,6 +827,7 @@
 
 config SENSORS_PC87360
 	tristate "National Semiconductor PC87360 family"
+	depends on !PPC
 	select HWMON_VID
 	help
 	  If you say yes here you get access to the hardware monitoring
@@ -837,6 +841,7 @@
 
 config SENSORS_PC87427
 	tristate "National Semiconductor PC87427"
+	depends on !PPC
 	help
 	  If you say yes here you get access to the hardware monitoring
 	  functions of the National Semiconductor PC87427 Super-I/O chip.
@@ -928,7 +933,7 @@
 
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C && EXPERIMENTAL && !PPC
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware monitoring
@@ -970,6 +975,7 @@
 
 config SENSORS_SMSC47M1
 	tristate "SMSC LPC47M10x and compatibles"
+	depends on !PPC
 	help
 	  If you say yes here you get support for the integrated fan
 	  monitoring and control capabilities of the SMSC LPC47B27x,
@@ -1003,7 +1009,7 @@
 
 config SENSORS_SMSC47B397
 	tristate "SMSC LPC47B397-NC"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && !PPC
 	help
 	  If you say yes here you get support for the SMSC LPC47B397-NC
 	  sensor chip.
@@ -1017,6 +1023,7 @@
 
 config SENSORS_SCH5627
 	tristate "SMSC SCH5627"
+	depends on !PPC
 	select SENSORS_SCH56XX_COMMON
 	help
 	  If you say yes here you get support for the hardware monitoring
@@ -1027,6 +1034,7 @@
 
 config SENSORS_SCH5636
 	tristate "SMSC SCH5636"
+	depends on !PPC
 	select SENSORS_SCH56XX_COMMON
 	help
 	  SMSC SCH5636 Super I/O chips include an embedded microcontroller for
@@ -1150,6 +1158,7 @@
 
 config SENSORS_VT1211
 	tristate "VIA VT1211"
+	depends on !PPC
 	select HWMON_VID
 	help
 	  If you say yes here then you get support for hardware monitoring
@@ -1262,6 +1271,7 @@
 
 config SENSORS_W83627HF
 	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+	depends on !PPC
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the Winbond W836X7 series
@@ -1272,7 +1282,8 @@
 	  will be called w83627hf.
 
 config SENSORS_W83627EHF
-	tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
+	tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
+	depends on !PPC
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware
@@ -1281,7 +1292,8 @@
 	  This driver also supports the W83627EHG, which is the lead-free
 	  version of the W83627EHF, and the W83627DHG, which is a similar
 	  chip suited for specific Intel processors that use PECI such as
-	  the Core 2 Duo.
+	  the Core 2 Duo. And also the W83627UHG, which is a stripped down
+	  version of the W83627DHG (as far as hardware monitoring goes.)
 
 	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
 	  (also known as W83667HG-I), and NCT6776F.
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index 318e38e..5d760f3 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -160,7 +160,6 @@
 static struct spi_driver ad7314_driver = {
 	.driver = {
 		.name = "ad7314",
-		.bus = &spi_bus_type,
 		.owner = THIS_MODULE,
 	},
 	.probe = ad7314_probe,
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index d46c0c7..df29a7f 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -58,10 +58,9 @@
 
 static inline int ad7414_read(struct i2c_client *client, u8 reg)
 {
-	if (reg == AD7414_REG_TEMP) {
-		int value = i2c_smbus_read_word_data(client, reg);
-		return (value < 0) ? value : swab16(value);
-	} else
+	if (reg == AD7414_REG_TEMP)
+		return i2c_smbus_read_word_swapped(client, reg);
+	else
 		return i2c_smbus_read_byte_data(client, reg);
 }
 
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index ffc781f..8cb718c 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -76,20 +76,6 @@
 	.id_table	= ad7418_id,
 };
 
-/* All registers are word-sized, except for the configuration registers.
- * AD7418 uses a high-byte first convention. Do NOT use those functions to
- * access the configuration registers CONF and CONF2, as they are byte-sized.
- */
-static inline int ad7418_read(struct i2c_client *client, u8 reg)
-{
-	return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
-static inline int ad7418_write(struct i2c_client *client, u8 reg, u16 value)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
 static void ad7418_init_client(struct i2c_client *client)
 {
 	struct ad7418_data *data = i2c_get_clientdata(client);
@@ -128,7 +114,9 @@
 		udelay(30);
 
 		for (i = 0; i < 3; i++) {
-			data->temp[i] = ad7418_read(client, AD7418_REG_TEMP[i]);
+			data->temp[i] =
+				i2c_smbus_read_word_swapped(client,
+						AD7418_REG_TEMP[i]);
 		}
 
 		for (i = 0, ch = 4; i < data->adc_max; i++, ch--) {
@@ -138,11 +126,12 @@
 
 			udelay(15);
 			data->in[data->adc_max - 1 - i] =
-				ad7418_read(client, AD7418_REG_ADC);
+				i2c_smbus_read_word_swapped(client,
+						AD7418_REG_ADC);
 		}
 
 		/* restore old configuration value */
-		ad7418_write(client, AD7418_REG_CONF, cfg);
+		i2c_smbus_write_word_swapped(client, AD7418_REG_CONF, cfg);
 
 		data->last_updated = jiffies;
 		data->valid = 1;
@@ -182,7 +171,9 @@
 
 	mutex_lock(&data->lock);
 	data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
-	ad7418_write(client, AD7418_REG_TEMP[attr->index], data->temp[attr->index]);
+	i2c_smbus_write_word_swapped(client,
+				     AD7418_REG_TEMP[attr->index],
+				     data->temp[attr->index]);
 	mutex_unlock(&data->lock);
 	return count;
 }
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index e9beeda..eedca3c 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -59,19 +59,6 @@
 	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
 };
 
-static s32 ads1015_read_reg(struct i2c_client *client, unsigned int reg)
-{
-	s32 data = i2c_smbus_read_word_data(client, reg);
-
-	return (data < 0) ? data : swab16(data);
-}
-
-static s32 ads1015_write_reg(struct i2c_client *client, unsigned int reg,
-			     u16 val)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
 static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
 			      int *value)
 {
@@ -87,7 +74,7 @@
 	mutex_lock(&data->update_lock);
 
 	/* get channel parameters */
-	res = ads1015_read_reg(client, ADS1015_CONFIG);
+	res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
 	if (res < 0)
 		goto err_unlock;
 	config = res;
@@ -101,13 +88,13 @@
 	config |= (pga & 0x0007) << 9;
 	config |= (data_rate & 0x0007) << 5;
 
-	res = ads1015_write_reg(client, ADS1015_CONFIG, config);
+	res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
 	if (res < 0)
 		goto err_unlock;
 
 	/* wait until conversion finished */
 	msleep(conversion_time_ms);
-	res = ads1015_read_reg(client, ADS1015_CONFIG);
+	res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
 	if (res < 0)
 		goto err_unlock;
 	config = res;
@@ -117,7 +104,7 @@
 		goto err_unlock;
 	}
 
-	res = ads1015_read_reg(client, ADS1015_CONVERSION);
+	res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
 	if (res < 0)
 		goto err_unlock;
 	conversion = res;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index c42c5a6..cfcc3b6 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -74,13 +74,6 @@
 static int ads7828_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id);
 
-/* The ADS7828 returns the 12-bit sample in two bytes,
-	these are read as a word then byte-swapped */
-static u16 ads7828_read_value(struct i2c_client *client, u8 reg)
-{
-	return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
 static inline u8 channel_cmd_byte(int ch)
 {
 	/* cmd byte C2,C1,C0 - see datasheet */
@@ -104,7 +97,8 @@
 
 		for (ch = 0; ch < ADS7828_NCH; ch++) {
 			u8 cmd = channel_cmd_byte(ch);
-			data->adc_input[ch] = ads7828_read_value(client, cmd);
+			data->adc_input[ch] =
+				i2c_smbus_read_word_swapped(client, cmd);
 		}
 		data->last_updated = jiffies;
 		data->valid = 1;
@@ -203,7 +197,7 @@
 	for (ch = 0; ch < ADS7828_NCH; ch++) {
 		u16 in_data;
 		u8 cmd = channel_cmd_byte(ch);
-		in_data = ads7828_read_value(client, cmd);
+		in_data = i2c_smbus_read_word_swapped(client, cmd);
 		if (in_data & 0xF000) {
 			pr_debug("%s : Doesn't look like an ads7828 device\n",
 				 __func__);
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 5231934..04450f8 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -227,7 +227,6 @@
 static struct spi_driver ads7871_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
-		.bus = &spi_bus_type,
 		.owner = THIS_MODULE,
 	},
 
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index c02a052..d7bd1f3 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -829,17 +829,17 @@
 		/* convert from ISA to LM75 I2C addresses */
 		switch (reg & 0xff) {
 		case 0x50: /* TEMP */
-			res = swab16(i2c_smbus_read_word_data(cl, 0));
+			res = i2c_smbus_read_word_swapped(cl, 0);
 			break;
 		case 0x52: /* CONFIG */
 			res = i2c_smbus_read_byte_data(cl, 1);
 			break;
 		case 0x53: /* HYST */
-			res = swab16(i2c_smbus_read_word_data(cl, 2));
+			res = i2c_smbus_read_word_swapped(cl, 2);
 			break;
 		case 0x55: /* MAX */
 		default:
-			res = swab16(i2c_smbus_read_word_data(cl, 3));
+			res = i2c_smbus_read_word_swapped(cl, 3);
 			break;
 		}
 	}
@@ -877,10 +877,10 @@
 			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
 			break;
 		case 0x53: /* HYST */
-			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			i2c_smbus_write_word_swapped(cl, 2, value);
 			break;
 		case 0x55: /* MAX */
-			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			i2c_smbus_write_word_swapped(cl, 3, value);
 			break;
 		}
 	}
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index ce18c04..104b376 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -60,14 +60,13 @@
 #ifdef CONFIG_SMP
 #define TO_PHYS_ID(cpu)		cpu_data(cpu).phys_proc_id
 #define TO_CORE_ID(cpu)		cpu_data(cpu).cpu_core_id
-#define TO_ATTR_NO(cpu)		(TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO)
 #define for_each_sibling(i, cpu)	for_each_cpu(i, cpu_sibling_mask(cpu))
 #else
 #define TO_PHYS_ID(cpu)		(cpu)
 #define TO_CORE_ID(cpu)		(cpu)
-#define TO_ATTR_NO(cpu)		(cpu)
 #define for_each_sibling(i, cpu)	for (i = 0; false; )
 #endif
+#define TO_ATTR_NO(cpu)		(TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO)
 
 /*
  * Per-Core Temperature Data
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index e113634..ef1ac996 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -80,24 +80,6 @@
 	u8 conf;			/* Register encoding, combined */
 };
 
-/* Temperature registers are word-sized.
-   DS1621 uses a high-byte first convention, which is exactly opposite to
-   the SMBus standard. */
-static int ds1621_read_temp(struct i2c_client *client, u8 reg)
-{
-	int ret;
-
-	ret = i2c_smbus_read_word_data(client, reg);
-	if (ret < 0)
-		return ret;
-	return swab16(ret);
-}
-
-static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
 static void ds1621_init_client(struct i2c_client *client)
 {
 	u8 conf, new_conf;
@@ -136,7 +118,7 @@
 		data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
 
 		for (i = 0; i < ARRAY_SIZE(data->temp); i++)
-			data->temp[i] = ds1621_read_temp(client,
+			data->temp[i] = i2c_smbus_read_word_swapped(client,
 							 DS1621_REG_TEMP[i]);
 
 		/* reset alarms if necessary */
@@ -177,8 +159,8 @@
 
 	mutex_lock(&data->update_lock);
 	data->temp[attr->index] = val;
-	ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
-			  data->temp[attr->index]);
+	i2c_smbus_write_word_swapped(client, DS1621_REG_TEMP[attr->index],
+				     data->temp[attr->index]);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 4f7c3fc..225ae4f 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -75,33 +75,13 @@
 	s16 temp[3];		/* Register values, word */
 };
 
-/*
- *  Temperature registers are word-sized.
- *  DS620 uses a high-byte first convention, which is exactly opposite to
- *  the SMBus standard.
- */
-static int ds620_read_temp(struct i2c_client *client, u8 reg)
-{
-	int ret;
-
-	ret = i2c_smbus_read_word_data(client, reg);
-	if (ret < 0)
-		return ret;
-	return swab16(ret);
-}
-
-static int ds620_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
 static void ds620_init_client(struct i2c_client *client)
 {
 	struct ds620_platform_data *ds620_info = client->dev.platform_data;
 	u16 conf, new_conf;
 
 	new_conf = conf =
-	    swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));
+	    i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
 
 	/* switch to continuous conversion mode */
 	new_conf &= ~DS620_REG_CONFIG_1SHOT;
@@ -118,8 +98,7 @@
 	new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
 
 	if (conf != new_conf)
-		i2c_smbus_write_word_data(client, DS620_REG_CONF,
-					  swab16(new_conf));
+		i2c_smbus_write_word_swapped(client, DS620_REG_CONF, new_conf);
 
 	/* start conversion */
 	i2c_smbus_write_byte(client, DS620_COM_START);
@@ -141,8 +120,8 @@
 		dev_dbg(&client->dev, "Starting ds620 update\n");
 
 		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
-			res = ds620_read_temp(client,
-					      DS620_REG_TEMP[i]);
+			res = i2c_smbus_read_word_swapped(client,
+							  DS620_REG_TEMP[i]);
 			if (res < 0) {
 				ret = ERR_PTR(res);
 				goto abort;
@@ -191,8 +170,8 @@
 
 	mutex_lock(&data->update_lock);
 	data->temp[attr->index] = val;
-	ds620_write_temp(client, DS620_REG_TEMP[attr->index],
-			 data->temp[attr->index]);
+	i2c_smbus_write_word_swapped(client, DS620_REG_TEMP[attr->index],
+				     data->temp[attr->index]);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -210,16 +189,15 @@
 		return PTR_ERR(data);
 
 	/* reset alarms if necessary */
-	res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
+	res = i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
 	if (res < 0)
 		return res;
 
-	conf = swab16(res);
-	new_conf = conf;
+	new_conf = conf = res;
 	new_conf &= ~attr->index;
 	if (conf != new_conf) {
-		res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
-						swab16(new_conf));
+		res = i2c_smbus_write_word_swapped(client, DS620_REG_CONF,
+						   new_conf);
 		if (res < 0)
 			return res;
 	}
diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
index faa0884..f2359a0 100644
--- a/drivers/hwmon/exynos4_tmu.c
+++ b/drivers/hwmon/exynos4_tmu.c
@@ -506,17 +506,7 @@
 	.resume = exynos4_tmu_resume,
 };
 
-static int __init exynos4_tmu_driver_init(void)
-{
-	return platform_driver_register(&exynos4_tmu_driver);
-}
-module_init(exynos4_tmu_driver_init);
-
-static void __exit exynos4_tmu_driver_exit(void)
-{
-	platform_driver_unregister(&exynos4_tmu_driver);
-}
-module_exit(exynos4_tmu_driver_exit);
+module_platform_driver(exynos4_tmu_driver);
 
 MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index e7ae574..a13e2da 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -591,7 +591,7 @@
 static int gl518_read_value(struct i2c_client *client, u8 reg)
 {
 	if ((reg >= 0x07) && (reg <= 0x0c))
-		return swab16(i2c_smbus_read_word_data(client, reg));
+		return i2c_smbus_read_word_swapped(client, reg);
 	else
 		return i2c_smbus_read_byte_data(client, reg);
 }
@@ -599,7 +599,7 @@
 static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
 {
 	if ((reg >= 0x07) && (reg <= 0x0c))
-		return i2c_smbus_write_word_data(client, reg, swab16(value));
+		return i2c_smbus_write_word_swapped(client, reg, value);
 	else
 		return i2c_smbus_write_byte_data(client, reg, value);
 }
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 131ea86..cd6085b 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -821,7 +821,7 @@
 static int gl520_read_value(struct i2c_client *client, u8 reg)
 {
 	if ((reg >= 0x07) && (reg <= 0x0c))
-		return swab16(i2c_smbus_read_word_data(client, reg));
+		return i2c_smbus_read_word_swapped(client, reg);
 	else
 		return i2c_smbus_read_byte_data(client, reg);
 }
@@ -829,7 +829,7 @@
 static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
 {
 	if ((reg >= 0x07) && (reg <= 0x0c))
-		return i2c_smbus_write_word_data(client, reg, swab16(value));
+		return i2c_smbus_write_word_swapped(client, reg, value);
 	else
 		return i2c_smbus_write_byte_data(client, reg, value);
 }
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 89aa9fb..9ba38f3 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -539,18 +539,7 @@
 	},
 };
 
-static int __init gpio_fan_init(void)
-{
-	return platform_driver_register(&gpio_fan_driver);
-}
-
-static void __exit gpio_fan_exit(void)
-{
-	platform_driver_unregister(&gpio_fan_driver);
-}
-
-module_init(gpio_fan_init);
-module_exit(gpio_fan_exit);
+module_platform_driver(gpio_fan_driver);
 
 MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
 MODULE_DESCRIPTION("GPIO FAN driver");
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 783d0c1..6a967d7 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -147,8 +147,9 @@
 	int			id;
 	struct aem_ipmi_data	ipmi;
 
-	/* Function to update sensors */
+	/* Function and buffer to update sensors */
 	void (*update)(struct aem_data *data);
+	struct aem_read_sensor_resp *rs_resp;
 
 	/*
 	 * AEM 1.x sensors:
@@ -245,8 +246,6 @@
 static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
 
 static void aem_remove_sensors(struct aem_data *data);
-static int aem_init_aem1(struct aem_ipmi_data *probe);
-static int aem_init_aem2(struct aem_ipmi_data *probe);
 static int aem1_find_sensors(struct aem_data *data);
 static int aem2_find_sensors(struct aem_data *data);
 static void update_aem1_sensors(struct aem_data *data);
@@ -357,13 +356,14 @@
 
 /* Sensor support functions */
 
-/* Read a sensor value */
+/* Read a sensor value; must be called with data->lock held */
 static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
 			   void *buf, size_t size)
 {
 	int rs_size, res;
 	struct aem_read_sensor_req rs_req;
-	struct aem_read_sensor_resp *rs_resp;
+	/* Use preallocated rx buffer */
+	struct aem_read_sensor_resp *rs_resp = data->rs_resp;
 	struct aem_ipmi_data *ipmi = &data->ipmi;
 
 	/* AEM registers are 1, 2, 4 or 8 bytes */
@@ -389,10 +389,6 @@
 	ipmi->tx_message.data_len = sizeof(rs_req);
 
 	rs_size = sizeof(*rs_resp) + size;
-	rs_resp = kzalloc(rs_size, GFP_KERNEL);
-	if (!rs_resp)
-		return -ENOMEM;
-
 	ipmi->rx_msg_data = rs_resp;
 	ipmi->rx_msg_len = rs_size;
 
@@ -435,7 +431,6 @@
 	res = 0;
 
 out:
-	kfree(rs_resp);
 	return res;
 }
 
@@ -493,6 +488,7 @@
 {
 	list_del(&data->list);
 	aem_remove_sensors(data);
+	kfree(data->rs_resp);
 	hwmon_device_unregister(data->hwmon_dev);
 	ipmi_destroy_user(data->ipmi.user);
 	platform_set_drvdata(data->pdev, NULL);
@@ -570,24 +566,31 @@
 	platform_set_drvdata(data->pdev, data);
 
 	/* Set up IPMI interface */
-	if (aem_init_ipmi_data(&data->ipmi, probe->interface,
-			       probe->bmc_device))
+	res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+				 probe->bmc_device);
+	if (res)
 		goto ipmi_err;
 
 	/* Register with hwmon */
 	data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
 	if (IS_ERR(data->hwmon_dev)) {
 		dev_err(&data->pdev->dev, "Unable to register hwmon "
 			"device for IPMI interface %d\n",
 			probe->interface);
+		res = PTR_ERR(data->hwmon_dev);
 		goto hwmon_reg_err;
 	}
 
 	data->update = update_aem1_sensors;
+	data->rs_resp = kzalloc(sizeof(*(data->rs_resp)) + 8, GFP_KERNEL);
+	if (!data->rs_resp) {
+		res = -ENOMEM;
+		goto alloc_resp_err;
+	}
 
 	/* Find sensors */
-	if (aem1_find_sensors(data))
+	res = aem1_find_sensors(data);
+	if (res)
 		goto sensor_err;
 
 	/* Add to our list of AEM devices */
@@ -599,6 +602,8 @@
 	return 0;
 
 sensor_err:
+	kfree(data->rs_resp);
+alloc_resp_err:
 	hwmon_device_unregister(data->hwmon_dev);
 hwmon_reg_err:
 	ipmi_destroy_user(data->ipmi.user);
@@ -614,7 +619,7 @@
 }
 
 /* Find and initialize all AEM1 instances */
-static int aem_init_aem1(struct aem_ipmi_data *probe)
+static void aem_init_aem1(struct aem_ipmi_data *probe)
 {
 	int num, i, err;
 
@@ -625,11 +630,8 @@
 			dev_err(probe->bmc_device,
 				"Error %d initializing AEM1 0x%X\n",
 				err, i);
-			return err;
 		}
 	}
-
-	return 0;
 }
 
 /* Probe functions for AEM2 devices */
@@ -704,24 +706,31 @@
 	platform_set_drvdata(data->pdev, data);
 
 	/* Set up IPMI interface */
-	if (aem_init_ipmi_data(&data->ipmi, probe->interface,
-			       probe->bmc_device))
+	res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+				 probe->bmc_device);
+	if (res)
 		goto ipmi_err;
 
 	/* Register with hwmon */
 	data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
 	if (IS_ERR(data->hwmon_dev)) {
 		dev_err(&data->pdev->dev, "Unable to register hwmon "
 			"device for IPMI interface %d\n",
 			probe->interface);
+		res = PTR_ERR(data->hwmon_dev);
 		goto hwmon_reg_err;
 	}
 
 	data->update = update_aem2_sensors;
+	data->rs_resp = kzalloc(sizeof(*(data->rs_resp)) + 8, GFP_KERNEL);
+	if (!data->rs_resp) {
+		res = -ENOMEM;
+		goto alloc_resp_err;
+	}
 
 	/* Find sensors */
-	if (aem2_find_sensors(data))
+	res = aem2_find_sensors(data);
+	if (res)
 		goto sensor_err;
 
 	/* Add to our list of AEM devices */
@@ -733,6 +742,8 @@
 	return 0;
 
 sensor_err:
+	kfree(data->rs_resp);
+alloc_resp_err:
 	hwmon_device_unregister(data->hwmon_dev);
 hwmon_reg_err:
 	ipmi_destroy_user(data->ipmi.user);
@@ -748,7 +759,7 @@
 }
 
 /* Find and initialize all AEM2 instances */
-static int aem_init_aem2(struct aem_ipmi_data *probe)
+static void aem_init_aem2(struct aem_ipmi_data *probe)
 {
 	struct aem_find_instance_resp fi_resp;
 	int err;
@@ -767,12 +778,9 @@
 			dev_err(probe->bmc_device,
 				"Error %d initializing AEM2 0x%X\n",
 				err, fi_resp.module_handle);
-			return err;
 		}
 		i++;
 	}
-
-	return 0;
 }
 
 /* Probe a BMC for AEM firmware instances */
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 02cebb7..2d3d728 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -154,8 +154,6 @@
 		      const struct i2c_device_id *id);
 static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info);
 static int jc42_remove(struct i2c_client *client);
-static int jc42_read_value(struct i2c_client *client, u8 reg);
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value);
 
 static struct jc42_data *jc42_update_device(struct device *dev);
 
@@ -187,7 +185,7 @@
 	struct jc42_data *data = i2c_get_clientdata(client);
 
 	data->config |= JC42_CFG_SHUTDOWN;
-	jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
 	return 0;
 }
 
@@ -197,7 +195,7 @@
 	struct jc42_data *data = i2c_get_clientdata(client);
 
 	data->config &= ~JC42_CFG_SHUTDOWN;
-	jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
 	return 0;
 }
 
@@ -315,7 +313,7 @@
 		return -EINVAL;						\
 	mutex_lock(&data->update_lock);					\
 	data->value = jc42_temp_to_reg(val, data->extended);		\
-	err = jc42_write_value(client, reg, data->value);		\
+	err = i2c_smbus_write_word_swapped(client, reg, data->value);	\
 	if (err < 0)							\
 		ret = err;						\
 	mutex_unlock(&data->update_lock);				\
@@ -357,7 +355,8 @@
 	data->config = (data->config
 			& ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT))
 	  | (hyst << JC42_CFG_HYST_SHIFT);
-	err = jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	err = i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+					   data->config);
 	if (err < 0)
 		ret = err;
 	mutex_unlock(&data->update_lock);
@@ -452,10 +451,10 @@
 				     I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
-	cap = jc42_read_value(new_client, JC42_REG_CAP);
-	config = jc42_read_value(new_client, JC42_REG_CONFIG);
-	manid = jc42_read_value(new_client, JC42_REG_MANID);
-	devid = jc42_read_value(new_client, JC42_REG_DEVICEID);
+	cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
+	config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
+	manid = i2c_smbus_read_word_swapped(new_client, JC42_REG_MANID);
+	devid = i2c_smbus_read_word_swapped(new_client, JC42_REG_DEVICEID);
 
 	if (cap < 0 || config < 0 || manid < 0 || devid < 0)
 		return -ENODEV;
@@ -489,14 +488,14 @@
 	i2c_set_clientdata(new_client, data);
 	mutex_init(&data->update_lock);
 
-	cap = jc42_read_value(new_client, JC42_REG_CAP);
+	cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
 	if (cap < 0) {
 		err = -EINVAL;
 		goto exit_free;
 	}
 	data->extended = !!(cap & JC42_CAP_RANGE);
 
-	config = jc42_read_value(new_client, JC42_REG_CONFIG);
+	config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
 	if (config < 0) {
 		err = -EINVAL;
 		goto exit_free;
@@ -504,7 +503,8 @@
 	data->orig_config = config;
 	if (config & JC42_CFG_SHUTDOWN) {
 		config &= ~JC42_CFG_SHUTDOWN;
-		jc42_write_value(new_client, JC42_REG_CONFIG, config);
+		i2c_smbus_write_word_swapped(new_client, JC42_REG_CONFIG,
+					     config);
 	}
 	data->config = config;
 
@@ -535,25 +535,12 @@
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &jc42_group);
 	if (data->config != data->orig_config)
-		jc42_write_value(client, JC42_REG_CONFIG, data->orig_config);
+		i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+					     data->orig_config);
 	kfree(data);
 	return 0;
 }
 
-/* All registers are word-sized. */
-static int jc42_read_value(struct i2c_client *client, u8 reg)
-{
-	int ret = i2c_smbus_read_word_data(client, reg);
-	if (ret < 0)
-		return ret;
-	return swab16(ret);
-}
-
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
 static struct jc42_data *jc42_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -564,28 +551,29 @@
 	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
-		val = jc42_read_value(client, JC42_REG_TEMP);
+		val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP);
 		if (val < 0) {
 			ret = ERR_PTR(val);
 			goto abort;
 		}
 		data->temp_input = val;
 
-		val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL);
+		val = i2c_smbus_read_word_swapped(client,
+						  JC42_REG_TEMP_CRITICAL);
 		if (val < 0) {
 			ret = ERR_PTR(val);
 			goto abort;
 		}
 		data->temp_crit = val;
 
-		val = jc42_read_value(client, JC42_REG_TEMP_LOWER);
+		val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER);
 		if (val < 0) {
 			ret = ERR_PTR(val);
 			goto abort;
 		}
 		data->temp_min = val;
 
-		val = jc42_read_value(client, JC42_REG_TEMP_UPPER);
+		val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER);
 		if (val < 0) {
 			ret = ERR_PTR(val);
 			goto abort;
diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c
index fea292d..7a48b1e 100644
--- a/drivers/hwmon/jz4740-hwmon.c
+++ b/drivers/hwmon/jz4740-hwmon.c
@@ -212,17 +212,7 @@
 	},
 };
 
-static int __init jz4740_hwmon_init(void)
-{
-	return platform_driver_register(&jz4740_hwmon_driver);
-}
-module_init(jz4740_hwmon_init);
-
-static void __exit jz4740_hwmon_exit(void)
-{
-	platform_driver_unregister(&jz4740_hwmon_driver);
-}
-module_exit(jz4740_hwmon_exit);
+module_platform_driver(jz4740_hwmon_driver);
 
 MODULE_DESCRIPTION("JZ4740 SoC HWMON driver");
 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 29b9030..9e64d96 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -34,7 +34,7 @@
 #define LM73_REG_CTRL		0x04
 #define LM73_REG_ID		0x07
 
-#define LM73_ID			0x9001 /* or 0x190 after a swab16() */
+#define LM73_ID			0x9001	/* 0x0190, byte-swapped */
 #define DRVNAME			"lm73"
 #define LM73_TEMP_MIN		(-40)
 #define LM73_TEMP_MAX		150
@@ -57,7 +57,7 @@
 	/* Write value */
 	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
 		(LM73_TEMP_MAX*4)) << 5;
-	i2c_smbus_write_word_data(client, attr->index, swab16(value));
+	i2c_smbus_write_word_swapped(client, attr->index, value);
 	return count;
 }
 
@@ -68,8 +68,8 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	/* use integer division instead of equivalent right shift to
 	   guarantee arithmetic shift and preserve the sign */
-	int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
-		attr->index)))*250) / 32;
+	int temp = ((s16) (i2c_smbus_read_word_swapped(client,
+		    attr->index))*250) / 32;
 	return sprintf(buf, "%d\n", temp);
 }
 
@@ -150,17 +150,31 @@
 			struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
-	u16 id;
-	u8 ctrl;
+	int id, ctrl, conf;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 					I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
+	/*
+	 * Do as much detection as possible with byte reads first, as word
+	 * reads can confuse other devices.
+	 */
+	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
+	if (ctrl < 0 || (ctrl & 0x10))
+		return -ENODEV;
+
+	conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF);
+	if (conf < 0 || (conf & 0x0c))
+		return -ENODEV;
+
+	id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID);
+	if (id < 0 || id != (LM73_ID & 0xff))
+		return -ENODEV;
+
 	/* Check device ID */
 	id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
-	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
-	if ((id != LM73_ID) || (ctrl & 0x10))
+	if (id < 0 || id != LM73_ID)
 		return -ENODEV;
 
 	strlcpy(info->type, "lm73", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 90126a2..1888dd0 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -384,13 +384,10 @@
  */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
-	int value;
-
 	if (reg == LM75_REG_CONF)
 		return i2c_smbus_read_byte_data(client, reg);
-
-	value = i2c_smbus_read_word_data(client, reg);
-	return (value < 0) ? value : swab16(value);
+	else
+		return i2c_smbus_read_word_swapped(client, reg);
 }
 
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -398,7 +395,7 @@
 	if (reg == LM75_REG_CONF)
 		return i2c_smbus_write_byte_data(client, reg, value);
 	else
-		return i2c_smbus_write_word_data(client, reg, swab16(value));
+		return i2c_smbus_write_word_swapped(client, reg, value);
 }
 
 static struct lm75_data *lm75_update_device(struct device *dev)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index b28a297..8dfc678 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -365,7 +365,7 @@
 	if (reg == LM77_REG_CONF)
 		return i2c_smbus_read_byte_data(client, reg);
 	else
-		return swab16(i2c_smbus_read_word_data(client, reg));
+		return i2c_smbus_read_word_swapped(client, reg);
 }
 
 static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -373,7 +373,7 @@
 	if (reg == LM77_REG_CONF)
 		return i2c_smbus_write_byte_data(client, reg, value);
 	else
-		return i2c_smbus_write_word_data(client, reg, swab16(value));
+		return i2c_smbus_write_word_swapped(client, reg, value);
 }
 
 static void lm77_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 90ddb87..615bc4f 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1105,41 +1105,37 @@
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm90_detect(struct i2c_client *new_client,
+static int lm90_detect(struct i2c_client *client,
 		       struct i2c_board_info *info)
 {
-	struct i2c_adapter *adapter = new_client->adapter;
-	int address = new_client->addr;
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 	const char *name = NULL;
-	int man_id, chip_id, reg_config1, reg_config2, reg_convrate;
+	int man_id, chip_id, config1, config2, convrate;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
 	/* detection and identification */
-	if ((man_id = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_MAN_ID)) < 0
-	 || (chip_id = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CHIP_ID)) < 0
-	 || (reg_config1 = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CONFIG1)) < 0
-	 || (reg_convrate = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CONVRATE)) < 0)
+	man_id = i2c_smbus_read_byte_data(client, LM90_REG_R_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, LM90_REG_R_CHIP_ID);
+	config1 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+	convrate = i2c_smbus_read_byte_data(client, LM90_REG_R_CONVRATE);
+	if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
 		return -ENODEV;
 
 	if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) {
-		reg_config2 = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CONFIG2);
-		if (reg_config2 < 0)
+		config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2);
+		if (config2 < 0)
 			return -ENODEV;
 	} else
-		reg_config2 = 0;	/* Make compiler happy */
+		config2 = 0;		/* Make compiler happy */
 
 	if ((address == 0x4C || address == 0x4D)
 	 && man_id == 0x01) { /* National Semiconductor */
-		if ((reg_config1 & 0x2A) == 0x00
-		 && (reg_config2 & 0xF8) == 0x00
-		 && reg_convrate <= 0x09) {
+		if ((config1 & 0x2A) == 0x00
+		 && (config2 & 0xF8) == 0x00
+		 && convrate <= 0x09) {
 			if (address == 0x4C
 			 && (chip_id & 0xF0) == 0x20) { /* LM90 */
 				name = "lm90";
@@ -1163,8 +1159,8 @@
 	if ((address == 0x4C || address == 0x4D)
 	 && man_id == 0x41) { /* Analog Devices */
 		if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
-		 && (reg_config1 & 0x3F) == 0x00
-		 && reg_convrate <= 0x0A) {
+		 && (config1 & 0x3F) == 0x00
+		 && convrate <= 0x0A) {
 			name = "adm1032";
 			/* The ADM1032 supports PEC, but only if combined
 			   transactions are not used. */
@@ -1173,18 +1169,18 @@
 				info->flags |= I2C_CLIENT_PEC;
 		} else
 		if (chip_id == 0x51 /* ADT7461 */
-		 && (reg_config1 & 0x1B) == 0x00
-		 && reg_convrate <= 0x0A) {
+		 && (config1 & 0x1B) == 0x00
+		 && convrate <= 0x0A) {
 			name = "adt7461";
 		} else
 		if (chip_id == 0x57 /* ADT7461A, NCT1008 */
-		 && (reg_config1 & 0x1B) == 0x00
-		 && reg_convrate <= 0x0A) {
+		 && (config1 & 0x1B) == 0x00
+		 && convrate <= 0x0A) {
 			name = "adt7461a";
 		}
 	} else
 	if (man_id == 0x4D) { /* Maxim */
-		int reg_emerg, reg_emerg2, reg_status2;
+		int emerg, emerg2, status2;
 
 		/*
 		 * We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read
@@ -1192,13 +1188,15 @@
 		 * exists, both readings will reflect the same value. Otherwise,
 		 * the readings will be different.
 		 */
-		if ((reg_emerg = i2c_smbus_read_byte_data(new_client,
-						MAX6659_REG_R_REMOTE_EMERG)) < 0
-		 || i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID) < 0
-		 || (reg_emerg2 = i2c_smbus_read_byte_data(new_client,
-						MAX6659_REG_R_REMOTE_EMERG)) < 0
-		 || (reg_status2 = i2c_smbus_read_byte_data(new_client,
-						MAX6696_REG_R_STATUS2)) < 0)
+		emerg = i2c_smbus_read_byte_data(client,
+						 MAX6659_REG_R_REMOTE_EMERG);
+		man_id = i2c_smbus_read_byte_data(client,
+						  LM90_REG_R_MAN_ID);
+		emerg2 = i2c_smbus_read_byte_data(client,
+						  MAX6659_REG_R_REMOTE_EMERG);
+		status2 = i2c_smbus_read_byte_data(client,
+						   MAX6696_REG_R_STATUS2);
+		if (emerg < 0 || man_id < 0 || emerg2 < 0 || status2 < 0)
 			return -ENODEV;
 
 		/*
@@ -1216,8 +1214,8 @@
 		 */
 		if (chip_id == man_id
 		 && (address == 0x4C || address == 0x4D || address == 0x4E)
-		 && (reg_config1 & 0x1F) == (man_id & 0x0F)
-		 && reg_convrate <= 0x09) {
+		 && (config1 & 0x1F) == (man_id & 0x0F)
+		 && convrate <= 0x09) {
 			if (address == 0x4C)
 				name = "max6657";
 			else
@@ -1235,10 +1233,10 @@
 		 * one of those registers exists.
 		 */
 		if (chip_id == 0x01
-		 && (reg_config1 & 0x10) == 0x00
-		 && (reg_status2 & 0x01) == 0x00
-		 && reg_emerg == reg_emerg2
-		 && reg_convrate <= 0x07) {
+		 && (config1 & 0x10) == 0x00
+		 && (status2 & 0x01) == 0x00
+		 && emerg == emerg2
+		 && convrate <= 0x07) {
 			name = "max6696";
 		} else
 		/*
@@ -1248,8 +1246,8 @@
 		 * second to last bit of config1 (software reset).
 		 */
 		if (chip_id == 0x01
-		 && (reg_config1 & 0x03) == 0x00
-		 && reg_convrate <= 0x07) {
+		 && (config1 & 0x03) == 0x00
+		 && convrate <= 0x07) {
 			name = "max6680";
 		} else
 		/*
@@ -1258,21 +1256,21 @@
 		 * register are unused and should return zero when read.
 		 */
 		if (chip_id == 0x59
-		 && (reg_config1 & 0x3f) == 0x00
-		 && reg_convrate <= 0x07) {
+		 && (config1 & 0x3f) == 0x00
+		 && convrate <= 0x07) {
 			name = "max6646";
 		}
 	} else
 	if (address == 0x4C
 	 && man_id == 0x5C) { /* Winbond/Nuvoton */
-		if ((reg_config1 & 0x2A) == 0x00
-		 && (reg_config2 & 0xF8) == 0x00) {
+		if ((config1 & 0x2A) == 0x00
+		 && (config2 & 0xF8) == 0x00) {
 			if (chip_id == 0x01 /* W83L771W/G */
-			 && reg_convrate <= 0x09) {
+			 && convrate <= 0x09) {
 				name = "w83l771";
 			} else
 			if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
-			 && reg_convrate <= 0x08) {
+			 && convrate <= 0x08) {
 				name = "w83l771";
 			}
 		}
@@ -1280,9 +1278,9 @@
 	if (address >= 0x48 && address <= 0x4F
 	 && man_id == 0xA1) { /*  NXP Semiconductor/Philips */
 		if (chip_id == 0x00
-		 && (reg_config1 & 0x2A) == 0x00
-		 && (reg_config2 & 0xFE) == 0x00
-		 && reg_convrate <= 0x09) {
+		 && (config1 & 0x2A) == 0x00
+		 && (config2 & 0xFE) == 0x00
+		 && convrate <= 0x09) {
 			name = "sa56004";
 		}
 	}
@@ -1301,19 +1299,18 @@
 
 static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data)
 {
+	struct device *dev = &client->dev;
+
 	if (data->flags & LM90_HAVE_TEMP3)
-		sysfs_remove_group(&client->dev.kobj, &lm90_temp3_group);
+		sysfs_remove_group(&dev->kobj, &lm90_temp3_group);
 	if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
-		sysfs_remove_group(&client->dev.kobj,
-				   &lm90_emergency_alarm_group);
+		sysfs_remove_group(&dev->kobj, &lm90_emergency_alarm_group);
 	if (data->flags & LM90_HAVE_EMERGENCY)
-		sysfs_remove_group(&client->dev.kobj,
-				   &lm90_emergency_group);
+		sysfs_remove_group(&dev->kobj, &lm90_emergency_group);
 	if (data->flags & LM90_HAVE_OFFSET)
-		device_remove_file(&client->dev,
-				   &sensor_dev_attr_temp2_offset.dev_attr);
-	device_remove_file(&client->dev, &dev_attr_pec);
-	sysfs_remove_group(&client->dev.kobj, &lm90_group);
+		device_remove_file(dev, &sensor_dev_attr_temp2_offset.dev_attr);
+	device_remove_file(dev, &dev_attr_pec);
+	sysfs_remove_group(&dev->kobj, &lm90_group);
 }
 
 static void lm90_init_client(struct i2c_client *client)
@@ -1362,10 +1359,11 @@
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
-static int lm90_probe(struct i2c_client *new_client,
+static int lm90_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id)
 {
-	struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent);
+	struct device *dev = &client->dev;
+	struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
 	struct lm90_data *data;
 	int err;
 
@@ -1374,14 +1372,14 @@
 		err = -ENOMEM;
 		goto exit;
 	}
-	i2c_set_clientdata(new_client, data);
+	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
 
 	/* Set the device type */
 	data->kind = id->driver_data;
 	if (data->kind == adm1032) {
 		if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
-			new_client->flags &= ~I2C_CLIENT_PEC;
+			client->flags &= ~I2C_CLIENT_PEC;
 	}
 
 	/* Different devices have different alarm bits triggering the
@@ -1396,43 +1394,41 @@
 	data->max_convrate = lm90_params[data->kind].max_convrate;
 
 	/* Initialize the LM90 chip */
-	lm90_init_client(new_client);
+	lm90_init_client(client);
 
 	/* Register sysfs hooks */
-	err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
+	err = sysfs_create_group(&dev->kobj, &lm90_group);
 	if (err)
 		goto exit_free;
-	if (new_client->flags & I2C_CLIENT_PEC) {
-		err = device_create_file(&new_client->dev, &dev_attr_pec);
+	if (client->flags & I2C_CLIENT_PEC) {
+		err = device_create_file(dev, &dev_attr_pec);
 		if (err)
 			goto exit_remove_files;
 	}
 	if (data->flags & LM90_HAVE_OFFSET) {
-		err = device_create_file(&new_client->dev,
+		err = device_create_file(dev,
 					&sensor_dev_attr_temp2_offset.dev_attr);
 		if (err)
 			goto exit_remove_files;
 	}
 	if (data->flags & LM90_HAVE_EMERGENCY) {
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm90_emergency_group);
+		err = sysfs_create_group(&dev->kobj, &lm90_emergency_group);
 		if (err)
 			goto exit_remove_files;
 	}
 	if (data->flags & LM90_HAVE_EMERGENCY_ALARM) {
-		err = sysfs_create_group(&new_client->dev.kobj,
+		err = sysfs_create_group(&dev->kobj,
 					 &lm90_emergency_alarm_group);
 		if (err)
 			goto exit_remove_files;
 	}
 	if (data->flags & LM90_HAVE_TEMP3) {
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm90_temp3_group);
+		err = sysfs_create_group(&dev->kobj, &lm90_temp3_group);
 		if (err)
 			goto exit_remove_files;
 	}
 
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove_files;
@@ -1441,7 +1437,7 @@
 	return 0;
 
 exit_remove_files:
-	lm90_remove_files(new_client, data);
+	lm90_remove_files(client, data);
 exit_free:
 	kfree(data);
 exit:
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 7c31e62..8fcbd4d4 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -117,16 +117,16 @@
 	if (time_after(jiffies, data->last_updated + HZ)
 	 || !data->valid) {
 		dev_dbg(&client->dev, "Updating lm92 data\n");
-		data->temp1_input = swab16(i2c_smbus_read_word_data(client,
-				    LM92_REG_TEMP));
-		data->temp1_hyst = swab16(i2c_smbus_read_word_data(client,
-				    LM92_REG_TEMP_HYST));
-		data->temp1_crit = swab16(i2c_smbus_read_word_data(client,
-				    LM92_REG_TEMP_CRIT));
-		data->temp1_min = swab16(i2c_smbus_read_word_data(client,
-				    LM92_REG_TEMP_LOW));
-		data->temp1_max = swab16(i2c_smbus_read_word_data(client,
-				    LM92_REG_TEMP_HIGH));
+		data->temp1_input = i2c_smbus_read_word_swapped(client,
+				    LM92_REG_TEMP);
+		data->temp1_hyst = i2c_smbus_read_word_swapped(client,
+				    LM92_REG_TEMP_HYST);
+		data->temp1_crit = i2c_smbus_read_word_swapped(client,
+				    LM92_REG_TEMP_CRIT);
+		data->temp1_min = i2c_smbus_read_word_swapped(client,
+				    LM92_REG_TEMP_LOW);
+		data->temp1_max = i2c_smbus_read_word_swapped(client,
+				    LM92_REG_TEMP_HIGH);
 
 		data->last_updated = jiffies;
 		data->valid = 1;
@@ -158,7 +158,7 @@
  \
 	mutex_lock(&data->update_lock); \
 	data->value = TEMP_TO_REG(val); \
-	i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
+	i2c_smbus_write_word_swapped(client, reg, data->value); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
 }
@@ -194,8 +194,8 @@
 
 	mutex_lock(&data->update_lock);
 	data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
-	i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
-				  swab16(TEMP_TO_REG(data->temp1_hyst)));
+	i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST,
+				     TEMP_TO_REG(data->temp1_hyst));
 	mutex_unlock(&data->update_lock);
 	return count;
 }
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index dd2d7b9..385886a 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -137,10 +137,10 @@
 {
 	int rv;
 
-	rv = i2c_smbus_read_word_data(client, reg);
+	rv = i2c_smbus_read_word_swapped(client, reg);
 	if (unlikely(rv < 0))
 		return rv;
-	return ((rv & 0xff) << 2) | ((rv >> 14) & 0x03);
+	return rv >> 6;
 }
 
 static struct max16065_data *max16065_update_device(struct device *dev)
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index d5226c9..ef65ab5 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -31,7 +31,7 @@
 #define MC13783_ADC_NAME	"mc13783-adc"
 
 struct mc13783_adc_priv {
-	struct mc13783 *mc13783;
+	struct mc13xxx *mc13xxx;
 	struct device *hwmon_dev;
 };
 
@@ -51,8 +51,8 @@
 	unsigned int sample[4];
 	int ret;
 
-	ret = mc13783_adc_do_conversion(priv->mc13783,
-			MC13783_ADC_MODE_MULT_CHAN,
+	ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
+			MC13XXX_ADC_MODE_MULT_CHAN,
 			channel, sample);
 	if (ret)
 		return ret;
@@ -147,9 +147,9 @@
 static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
 {
 	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
-	unsigned flags = mc13783_get_flags(priv->mc13783);
+	unsigned flags = mc13xxx_get_flags(priv->mc13xxx);
 
-	return flags & MC13783_USE_TOUCHSCREEN;
+	return flags & MC13XXX_USE_TOUCHSCREEN;
 }
 
 static int __init mc13783_adc_probe(struct platform_device *pdev)
@@ -161,7 +161,7 @@
 	if (!priv)
 		return -ENOMEM;
 
-	priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 
 	platform_set_drvdata(pdev, priv);
 
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index eab1161..9b382ec 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -432,19 +432,7 @@
 	.id_table = ntc_thermistor_id,
 };
 
-static int __init ntc_thermistor_init(void)
-{
-	return platform_driver_register(&ntc_thermistor_driver);
-}
-
-module_init(ntc_thermistor_init);
-
-static void __exit ntc_thermistor_cleanup(void)
-{
-	platform_driver_unregister(&ntc_thermistor_driver);
-}
-
-module_exit(ntc_thermistor_cleanup);
+module_platform_driver(ntc_thermistor_driver);
 
 MODULE_DESCRIPTION("NTC Thermistor Driver");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index b39f52e..f6c26d1 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -393,18 +393,7 @@
 	.remove		= __devexit_p(s3c_hwmon_remove),
 };
 
-static int __init s3c_hwmon_init(void)
-{
-	return platform_driver_register(&s3c_hwmon_driver);
-}
-
-static void __exit s3c_hwmon_exit(void)
-{
-	platform_driver_unregister(&s3c_hwmon_driver);
-}
-
-module_init(s3c_hwmon_init);
-module_exit(s3c_hwmon_exit);
+module_platform_driver(s3c_hwmon_driver);
 
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C ADC HWMon driver");
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index e3b5c60..79b6dab 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -590,19 +590,8 @@
 	.remove		= sch5627_remove,
 };
 
-static int __init sch5627_init(void)
-{
-	return platform_driver_register(&sch5627_driver);
-}
-
-static void __exit sch5627_exit(void)
-{
-	platform_driver_unregister(&sch5627_driver);
-}
+module_platform_driver(sch5627_driver);
 
 MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver");
 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 MODULE_LICENSE("GPL");
-
-module_init(sch5627_init);
-module_exit(sch5627_exit);
diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c
index 244407a..9d5236f 100644
--- a/drivers/hwmon/sch5636.c
+++ b/drivers/hwmon/sch5636.c
@@ -521,19 +521,8 @@
 	.remove		= sch5636_remove,
 };
 
-static int __init sch5636_init(void)
-{
-	return platform_driver_register(&sch5636_driver);
-}
-
-static void __exit sch5636_exit(void)
-{
-	platform_driver_unregister(&sch5636_driver);
-}
+module_platform_driver(sch5636_driver);
 
 MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver");
 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
 MODULE_LICENSE("GPL");
-
-module_init(sch5636_init);
-module_exit(sch5636_exit);
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
index 1c8c981..1539878 100644
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -83,25 +83,6 @@
 }
 
 /**
- * sht21_read_word_data() - read word from register
- * @client: I2C client device
- * @reg: I2C command byte
- *
- * Returns value, negative errno on error.
- */
-static inline int sht21_read_word_data(struct i2c_client *client, u8 reg)
-{
-	int ret = i2c_smbus_read_word_data(client, reg);
-	if (ret < 0)
-		return ret;
-	/*
-	 * SMBus specifies low byte first, but the SHT21 returns MSB
-	 * first, so we have to swab16 the values
-	 */
-	return swab16(ret);
-}
-
-/**
  * sht21_update_measurements() - get updated measurements from device
  * @client: I2C client device
  *
@@ -119,12 +100,13 @@
 	 * maximum two measurements per second at 12bit accuracy shall be made.
 	 */
 	if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
-		ret = sht21_read_word_data(client, SHT21_TRIG_T_MEASUREMENT_HM);
+		ret = i2c_smbus_read_word_swapped(client,
+						  SHT21_TRIG_T_MEASUREMENT_HM);
 		if (ret < 0)
 			goto out;
 		sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
-		ret = sht21_read_word_data(client,
-					SHT21_TRIG_RH_MEASUREMENT_HM);
+		ret = i2c_smbus_read_word_swapped(client,
+						  SHT21_TRIG_RH_MEASUREMENT_HM);
 		if (ret < 0)
 			goto out;
 		sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c
index 425df5bc..4116381 100644
--- a/drivers/hwmon/smm665.c
+++ b/drivers/hwmon/smm665.c
@@ -214,33 +214,26 @@
 	 *
 	 * Neither i2c_smbus_read_byte() nor
 	 * i2c_smbus_read_block_data() worked here,
-	 * so use i2c_smbus_read_word_data() instead.
+	 * so use i2c_smbus_read_word_swapped() instead.
 	 * We could also try to use i2c_master_recv(),
 	 * but that is not always supported.
 	 */
-	rv = i2c_smbus_read_word_data(client, 0);
+	rv = i2c_smbus_read_word_swapped(client, 0);
 	if (rv < 0) {
 		dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
 		return -1;
 	}
 	/*
 	 * Validate/verify readback adc channel (in bit 11..14).
-	 * High byte is in lower 8 bit of rv, so only shift by 3.
 	 */
-	radc = (rv >> 3) & 0x0f;
+	radc = (rv >> 11) & 0x0f;
 	if (radc != adc) {
 		dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
 			adc, radc);
 		return -EIO;
 	}
-	/*
-	 * Chip replies with H/L, while SMBus expects L/H.
-	 * Thus, byte order is reversed, and we have to swap
-	 * the result.
-	 */
-	rv = swab16(rv) & SMM665_ADC_MASK;
 
-	return rv;
+	return rv & SMM665_ADC_MASK;
 }
 
 static struct smm665_data *smm665_update_device(struct device *dev)
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 9fb7516..65c88ff 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -113,7 +113,7 @@
 	u8 temp[4];
 };
 
-static int smsc47b397_read_value(struct smsc47b397_data* data, u8 reg)
+static int smsc47b397_read_value(struct smsc47b397_data *data, u8 reg)
 {
 	int res;
 
@@ -265,7 +265,8 @@
 		return -EBUSY;
 	}
 
-	if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto error_release;
 	}
@@ -276,7 +277,8 @@
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
-	if ((err = sysfs_create_group(&dev->kobj, &smsc47b397_group)))
+	err = sysfs_create_group(&dev->kobj, &smsc47b397_group);
+	if (err)
 		goto error_free;
 
 	data->hwmon_dev = hwmon_device_register(dev);
@@ -345,7 +347,7 @@
 	superio_enter();
 	id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 
-	switch(id) {
+	switch (id) {
 	case 0x81:
 		name = "SCH5307-NS";
 		break;
@@ -379,7 +381,8 @@
 	unsigned short address;
 	int ret;
 
-	if ((ret = smsc47b397_find(&address)))
+	ret = smsc47b397_find(&address);
+	if (ret)
 		return ret;
 
 	ret = platform_driver_register(&smsc47b397_driver);
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 5bd19496..643aa8c 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -55,19 +55,6 @@
 	int temp[3];
 };
 
-/* SMBus specifies low byte first, but the TMP102 returns high byte first,
- * so we have to swab16 the values */
-static inline int tmp102_read_reg(struct i2c_client *client, u8 reg)
-{
-	int result = i2c_smbus_read_word_data(client, reg);
-	return result < 0 ? result : swab16(result);
-}
-
-static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
-{
-	return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
 /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
 static inline int tmp102_reg_to_mC(s16 val)
 {
@@ -94,7 +81,8 @@
 	if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
 		int i;
 		for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
-			int status = tmp102_read_reg(client, tmp102_reg[i]);
+			int status = i2c_smbus_read_word_swapped(client,
+								 tmp102_reg[i]);
 			if (status > -1)
 				tmp102->temp[i] = tmp102_reg_to_mC(status);
 		}
@@ -130,8 +118,8 @@
 
 	mutex_lock(&tmp102->lock);
 	tmp102->temp[sda->index] = val;
-	status = tmp102_write_reg(client, tmp102_reg[sda->index],
-				  tmp102_mC_to_reg(val));
+	status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index],
+					      tmp102_mC_to_reg(val));
 	mutex_unlock(&tmp102->lock);
 	return status ? : count;
 }
@@ -178,18 +166,19 @@
 	}
 	i2c_set_clientdata(client, tmp102);
 
-	status = tmp102_read_reg(client, TMP102_CONF_REG);
+	status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
 	if (status < 0) {
 		dev_err(&client->dev, "error reading config register\n");
 		goto fail_free;
 	}
 	tmp102->config_orig = status;
-	status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+	status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+					      TMP102_CONFIG);
 	if (status < 0) {
 		dev_err(&client->dev, "error writing config register\n");
 		goto fail_restore_config;
 	}
-	status = tmp102_read_reg(client, TMP102_CONF_REG);
+	status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
 	if (status < 0) {
 		dev_err(&client->dev, "error reading config register\n");
 		goto fail_restore_config;
@@ -222,7 +211,8 @@
 fail_remove_sysfs:
 	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
 fail_restore_config:
-	tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
+	i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+				     tmp102->config_orig);
 fail_free:
 	kfree(tmp102);
 
@@ -240,10 +230,10 @@
 	if (tmp102->config_orig & TMP102_CONF_SD) {
 		int config;
 
-		config = tmp102_read_reg(client, TMP102_CONF_REG);
+		config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
 		if (config >= 0)
-			tmp102_write_reg(client, TMP102_CONF_REG,
-					 config | TMP102_CONF_SD);
+			i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+						     config | TMP102_CONF_SD);
 	}
 
 	kfree(tmp102);
@@ -257,12 +247,12 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	int config;
 
-	config = tmp102_read_reg(client, TMP102_CONF_REG);
+	config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
 	if (config < 0)
 		return config;
 
 	config |= TMP102_CONF_SD;
-	return tmp102_write_reg(client, TMP102_CONF_REG, config);
+	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
 }
 
 static int tmp102_resume(struct device *dev)
@@ -270,12 +260,12 @@
 	struct i2c_client *client = to_i2c_client(dev);
 	int config;
 
-	config = tmp102_read_reg(client, TMP102_CONF_REG);
+	config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
 	if (config < 0)
 		return config;
 
 	config &= ~TMP102_CONF_SD;
-	return tmp102_write_reg(client, TMP102_CONF_REG, config);
+	return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
 }
 
 static const struct dev_pm_ops tmp102_dev_pm_ops = {
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 5724074..0018c7d 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -136,19 +136,7 @@
 		   },
 };
 
-static int __init twl4030_madc_hwmon_init(void)
-{
-	return platform_driver_register(&twl4030_madc_hwmon_driver);
-}
-
-module_init(twl4030_madc_hwmon_init);
-
-static void __exit twl4030_madc_hwmon_exit(void)
-{
-	platform_driver_unregister(&twl4030_madc_hwmon_driver);
-}
-
-module_exit(twl4030_madc_hwmon_exit);
+module_platform_driver(twl4030_madc_hwmon_driver);
 
 MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c
index 27a6271..b9a87e8 100644
--- a/drivers/hwmon/ultra45_env.c
+++ b/drivers/hwmon/ultra45_env.c
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/io.h>
 #include <linux/hwmon.h>
@@ -308,15 +309,4 @@
 	.remove		= __devexit_p(env_remove),
 };
 
-static int __init env_init(void)
-{
-	return platform_driver_register(&env_driver);
-}
-
-static void __exit env_exit(void)
-{
-	platform_driver_unregister(&env_driver);
-}
-
-module_init(env_init);
-module_exit(env_exit);
+module_platform_driver(env_driver);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 98aab4b..93f5fc7 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1,7 +1,7 @@
 /*
     w83627ehf - Driver for the hardware monitoring functionality of
 		the Winbond W83627EHF Super-I/O chip
-    Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2005-2011  Jean Delvare <khali@linux-fr.org>
     Copyright (C) 2006  Yuan Mu (Winbond),
 			Rudolf Marek <r.marek@assembler.cz>
 			David Hubbard <david.c.hubbard@gmail.com>
@@ -39,6 +39,7 @@
 					       0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
+    w83627uhg    8      2       2       2      0xa230 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
     w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
     nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
@@ -61,14 +62,17 @@
 #include <linux/io.h>
 #include "lm75.h"
 
-enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b, nct6775,
-	nct6776 };
+enum kinds {
+	w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
+	w83667hg, w83667hg_b, nct6775, nct6776,
+};
 
 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */
 static const char * const w83627ehf_device_names[] = {
 	"w83627ehf",
 	"w83627dhg",
 	"w83627dhg",
+	"w83627uhg",
 	"w83667hg",
 	"w83667hg",
 	"nct6775",
@@ -104,6 +108,7 @@
 #define SIO_W83627EHG_ID	0x8860
 #define SIO_W83627DHG_ID	0xa020
 #define SIO_W83627DHG_P_ID	0xb070
+#define SIO_W83627UHG_ID	0xa230
 #define SIO_W83667HG_ID		0xa510
 #define SIO_W83667HG_B_ID	0xb350
 #define SIO_NCT6775_ID		0xb470
@@ -388,18 +393,23 @@
 	return 1 << reg;
 }
 
-/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
+/* Some of the voltage inputs have internal scaling, the tables below
+ * contain 8 (the ADC LSB in mV) * scaling factor * 100 */
+static const u16 scale_in_common[10] = {
+	800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800
+};
+static const u16 scale_in_w83627uhg[9] = {
+	800, 800, 3328, 3424, 800, 800, 0, 3328, 3400
+};
 
-static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 };
-
-static inline long in_from_reg(u8 reg, u8 nr)
+static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in)
 {
-	return reg * scale_in[nr];
+	return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100);
 }
 
-static inline u8 in_to_reg(u32 val, u8 nr)
+static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
 {
-	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0,
+	return SENSORS_LIMIT(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0,
 			     255);
 }
 
@@ -430,6 +440,7 @@
 	const u16 *REG_FAN_STOP_TIME;
 	const u16 *REG_FAN_MAX_OUTPUT;
 	const u16 *REG_FAN_STEP_OUTPUT;
+	const u16 *scale_in;
 
 	unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
 	unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
@@ -481,7 +492,8 @@
 	u8 vrm;
 
 	u16 have_temp;
-	u8 in6_skip;
+	u8 in6_skip:1;
+	u8 temp3_val_only:1;
 };
 
 struct w83627ehf_sio_data {
@@ -907,7 +919,8 @@
 	struct sensor_device_attribute *sensor_attr = \
 		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \
+	return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
+		       data->scale_in)); \
 }
 show_in_reg(in)
 show_in_reg(in_min)
@@ -928,7 +941,7 @@
 	if (err < 0) \
 		return err; \
 	mutex_lock(&data->update_lock); \
-	data->in_##reg[nr] = in_to_reg(val, nr); \
+	data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
 	w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
 			      data->in_##reg[nr]); \
 	mutex_unlock(&data->update_lock); \
@@ -1617,25 +1630,28 @@
 		    store_fan_step_output, 3),
 };
 
+static struct sensor_device_attribute sda_sf3_arrays_fan3[] = {
+	SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
+		    store_fan_stop_time, 2),
+	SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
+		    store_fan_start_output, 2),
+	SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
+		    store_fan_stop_output, 2),
+};
+
 static struct sensor_device_attribute sda_sf3_arrays[] = {
 	SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
 		    store_fan_stop_time, 0),
 	SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
 		    store_fan_stop_time, 1),
-	SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
-		    store_fan_stop_time, 2),
 	SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
 		    store_fan_start_output, 0),
 	SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
 		    store_fan_start_output, 1),
-	SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
-		    store_fan_start_output, 2),
 	SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
 		    store_fan_stop_output, 0),
 	SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
 		    store_fan_stop_output, 1),
-	SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
-		    store_fan_stop_output, 2),
 };
 
 
@@ -1728,6 +1744,8 @@
 		    data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
 			device_remove_file(dev, &attr->dev_attr);
 	}
+	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
+		device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
 	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
 		device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
 	for (i = 0; i < data->in_num; i++) {
@@ -1756,6 +1774,8 @@
 			continue;
 		device_remove_file(dev, &sda_temp_input[i].dev_attr);
 		device_remove_file(dev, &sda_temp_label[i].dev_attr);
+		if (i == 2 && data->temp3_val_only)
+			continue;
 		device_remove_file(dev, &sda_temp_max[i].dev_attr);
 		device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
 		if (i > 2)
@@ -1808,11 +1828,24 @@
 	case w83627ehf:
 		diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
 		break;
+	case w83627uhg:
+		diode = 0x00;
+		break;
 	default:
 		diode = 0x70;
 	}
 	for (i = 0; i < 3; i++) {
-		if ((tmp & (0x02 << i)))
+		const char *label = NULL;
+
+		if (data->temp_label)
+			label = data->temp_label[data->temp_src[i]];
+
+		/* Digital source overrides analog type */
+		if (label && strncmp(label, "PECI", 4) == 0)
+			data->temp_type[i] = 6;
+		else if (label && strncmp(label, "AMD", 3) == 0)
+			data->temp_type[i] = 5;
+		else if ((tmp & (0x02 << i)))
 			data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
 		else
 			data->temp_type[i] = 4; /* thermistor */
@@ -1846,11 +1879,31 @@
 }
 
 static void __devinit
+w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
+{
+	int i;
+
+	for (i = 0; i < n_temp; i++) {
+		data->reg_temp[i] = W83627EHF_REG_TEMP[i];
+		data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
+		data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
+		data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+	}
+}
+
+static void __devinit
 w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
 			   struct w83627ehf_data *data)
 {
 	int fan3pin, fan4pin, fan4min, fan5pin, regval;
 
+	/* The W83627UHG is simple, only two fan inputs, no config */
+	if (sio_data->kind == w83627uhg) {
+		data->has_fan = 0x03; /* fan1 and fan2 */
+		data->has_fan_min = 0x03;
+		return;
+	}
+
 	superio_enter(sio_data->sioreg);
 
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
@@ -1942,24 +1995,25 @@
 
 	/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
 	data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
-	/* 667HG, NCT6775F, and NCT6776F have 3 pwms */
-	data->pwm_num = (sio_data->kind == w83667hg
-			 || sio_data->kind == w83667hg_b
-			 || sio_data->kind == nct6775
-			 || sio_data->kind == nct6776) ? 3 : 4;
-
-	data->have_temp = 0x07;
-	/* Check temp3 configuration bit for 667HG */
-	if (sio_data->kind == w83667hg) {
-		u8 reg;
-
-		reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
-		if (reg & 0x01)
-			data->have_temp &= ~(1 << 2);
-		else
-			data->in6_skip = 1;	/* either temp3 or in6 */
+	/* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */
+	switch (sio_data->kind) {
+	default:
+		data->pwm_num = 4;
+		break;
+	case w83667hg:
+	case w83667hg_b:
+	case nct6775:
+	case nct6776:
+		data->pwm_num = 3;
+		break;
+	case w83627uhg:
+		data->pwm_num = 2;
+		break;
 	}
 
+	/* Default to 3 temperature inputs, code below will adjust as needed */
+	data->have_temp = 0x07;
+
 	/* Deal with temperature register setup first. */
 	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
 		int mask = 0;
@@ -2035,16 +2089,12 @@
 	} else if (sio_data->kind == w83667hg_b) {
 		u8 reg;
 
+		w83627ehf_set_temp_reg_ehf(data, 4);
+
 		/*
 		 * Temperature sources are selected with bank 0, registers 0x49
 		 * and 0x4a.
 		 */
-		for (i = 0; i < ARRAY_SIZE(W83627EHF_REG_TEMP); i++) {
-			data->reg_temp[i] = W83627EHF_REG_TEMP[i];
-			data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
-			data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
-			data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
-		}
 		reg = w83627ehf_read_value(data, 0x4a);
 		data->temp_src[0] = reg >> 5;
 		reg = w83627ehf_read_value(data, 0x49);
@@ -2078,13 +2128,60 @@
 			data->in6_skip = 1;
 
 		data->temp_label = w83667hg_b_temp_label;
+	} else if (sio_data->kind == w83627uhg) {
+		u8 reg;
+
+		w83627ehf_set_temp_reg_ehf(data, 3);
+
+		/*
+		 * Temperature sources for temp1 and temp2 are selected with
+		 * bank 0, registers 0x49 and 0x4a.
+		 */
+		data->temp_src[0] = 0;	/* SYSTIN */
+		reg = w83627ehf_read_value(data, 0x49) & 0x07;
+		/* Adjust to have the same mapping as other source registers */
+		if (reg == 0)
+			data->temp_src[1]++;
+		else if (reg >= 2 && reg <= 5)
+			data->temp_src[1] += 2;
+		else	/* should never happen */
+			data->have_temp &= ~(1 << 1);
+		reg = w83627ehf_read_value(data, 0x4a);
+		data->temp_src[2] = reg >> 5;
+
+		/*
+		 * Skip temp3 if source is invalid or the same as temp1
+		 * or temp2.
+		 */
+		if (data->temp_src[2] == 2 || data->temp_src[2] == 3 ||
+		    data->temp_src[2] == data->temp_src[0] ||
+		    ((data->have_temp & (1 << 1)) &&
+		     data->temp_src[2] == data->temp_src[1]))
+			data->have_temp &= ~(1 << 2);
+		else
+			data->temp3_val_only = 1;	/* No limit regs */
+
+		data->in6_skip = 1;			/* No VIN3 */
+
+		data->temp_label = w83667hg_b_temp_label;
 	} else {
+		w83627ehf_set_temp_reg_ehf(data, 3);
+
 		/* Temperature sources are fixed */
-		for (i = 0; i < 3; i++) {
-			data->reg_temp[i] = W83627EHF_REG_TEMP[i];
-			data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
-			data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
-			data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+
+		if (sio_data->kind == w83667hg) {
+			u8 reg;
+
+			/*
+			 * Chip supports either AUXTIN or VIN3. Try to find
+			 * out which one.
+			 */
+			reg = w83627ehf_read_value(data,
+						W83627EHF_REG_TEMP_CONFIG[2]);
+			if (reg & 0x01)
+				data->have_temp &= ~(1 << 2);
+			else
+				data->in6_skip = 1;
 		}
 	}
 
@@ -2144,6 +2241,12 @@
 		  W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
 	}
 
+	/* Setup input voltage scaling factors */
+	if (sio_data->kind == w83627uhg)
+		data->scale_in = scale_in_w83627uhg;
+	else
+		data->scale_in = scale_in_common;
+
 	/* Initialize the chip */
 	w83627ehf_init_device(data, sio_data->kind);
 
@@ -2160,7 +2263,7 @@
 		err = device_create_file(dev, &dev_attr_cpu0_vid);
 		if (err)
 			goto exit_release;
-	} else {
+	} else if (sio_data->kind != w83627uhg) {
 		superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
 		if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
 			/* Set VID input sensibility if needed. In theory the
@@ -2250,7 +2353,14 @@
 				goto exit_remove;
 		}
 	}
-	/* if fan4 is enabled create the sf3 files for it */
+	/* if fan3 and fan4 are enabled create the sf3 files for them */
+	if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
+		for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
+			err = device_create_file(dev,
+					&sda_sf3_arrays_fan3[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
 	if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
 		for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
 			err = device_create_file(dev,
@@ -2318,6 +2428,8 @@
 			if (err)
 				goto exit_remove;
 		}
+		if (i == 2 && data->temp3_val_only)
+			continue;
 		if (data->reg_temp_over[i]) {
 			err = device_create_file(dev,
 				&sda_temp_max[i].dev_attr);
@@ -2401,6 +2513,7 @@
 	static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
 	static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
 	static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
+	static const char __initdata sio_name_W83627UHG[] = "W83627UHG";
 	static const char __initdata sio_name_W83667HG[] = "W83667HG";
 	static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
 	static const char __initdata sio_name_NCT6775[] = "NCT6775F";
@@ -2433,6 +2546,10 @@
 		sio_data->kind = w83627dhg_p;
 		sio_name = sio_name_W83627DHG_P;
 		break;
+	case SIO_W83627UHG_ID:
+		sio_data->kind = w83627uhg;
+		sio_name = sio_name_W83627UHG;
+		break;
 	case SIO_W83667HG_ID:
 		sio_data->kind = w83667hg;
 		sio_name = sio_name_W83667HG;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index eed43a0..65b685e 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1245,17 +1245,17 @@
 		/* convert from ISA to LM75 I2C addresses */
 		switch (reg & 0xff) {
 		case 0x50:	/* TEMP */
-			res = swab16(i2c_smbus_read_word_data(cl, 0));
+			res = i2c_smbus_read_word_swapped(cl, 0);
 			break;
 		case 0x52:	/* CONFIG */
 			res = i2c_smbus_read_byte_data(cl, 1);
 			break;
 		case 0x53:	/* HYST */
-			res = swab16(i2c_smbus_read_word_data(cl, 2));
+			res = i2c_smbus_read_word_swapped(cl, 2);
 			break;
 		case 0x55:	/* OVER */
 		default:
-			res = swab16(i2c_smbus_read_word_data(cl, 3));
+			res = i2c_smbus_read_word_swapped(cl, 3);
 			break;
 		}
 	}
@@ -1289,10 +1289,10 @@
 			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
 			break;
 		case 0x53:	/* HYST */
-			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			i2c_smbus_write_word_swapped(cl, 2, value);
 			break;
 		case 0x55:	/* OVER */
-			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			i2c_smbus_write_word_swapped(cl, 3, value);
 			break;
 		}
 	}
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
index 97b1f83..9b598ed 100644
--- a/drivers/hwmon/wm831x-hwmon.c
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -209,17 +209,7 @@
 	},
 };
 
-static int __init wm831x_hwmon_init(void)
-{
-	return platform_driver_register(&wm831x_hwmon_driver);
-}
-module_init(wm831x_hwmon_init);
-
-static void __exit wm831x_hwmon_exit(void)
-{
-	platform_driver_unregister(&wm831x_hwmon_driver);
-}
-module_exit(wm831x_hwmon_exit);
+module_platform_driver(wm831x_hwmon_driver);
 
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("WM831x Hardware Monitoring");
diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
index 1329059..3ff67ed 100644
--- a/drivers/hwmon/wm8350-hwmon.c
+++ b/drivers/hwmon/wm8350-hwmon.c
@@ -133,17 +133,7 @@
 	},
 };
 
-static int __init wm8350_hwmon_init(void)
-{
-	return platform_driver_register(&wm8350_hwmon_driver);
-}
-module_init(wm8350_hwmon_init);
-
-static void __exit wm8350_hwmon_exit(void)
-{
-	platform_driver_unregister(&wm8350_hwmon_driver);
-}
-module_exit(wm8350_hwmon_exit);
+module_platform_driver(wm8350_hwmon_driver);
 
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 1f29bab..c7c3128 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -2,22 +2,31 @@
 # Generic HWSPINLOCK framework
 #
 
+# HWSPINLOCK always gets selected by whoever wants it.
 config HWSPINLOCK
-	tristate "Generic Hardware Spinlock framework"
-	depends on ARCH_OMAP4
-	help
-	  Say y here to support the generic hardware spinlock framework.
-	  You only need to enable this if you have hardware spinlock module
-	  on your system (usually only relevant if your system has remote slave
-	  coprocessors).
+	tristate
 
-	  If unsure, say N.
+menu "Hardware Spinlock drivers"
 
 config HWSPINLOCK_OMAP
 	tristate "OMAP Hardware Spinlock device"
-	depends on HWSPINLOCK && ARCH_OMAP4
+	depends on ARCH_OMAP4
+	select HWSPINLOCK
 	help
 	  Say y here to support the OMAP Hardware Spinlock device (firstly
 	  introduced in OMAP4).
 
 	  If unsure, say N.
+
+config HSEM_U8500
+	tristate "STE Hardware Semaphore functionality"
+	depends on ARCH_U8500
+	select HWSPINLOCK
+	help
+	  Say y here to support the STE Hardware Semaphore functionality, which
+	  provides a synchronisation mechanism for the various processor on the
+	  SoC.
+
+	  If unsure, say N.
+
+endmenu
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 5729a3f..93eb64b 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_HWSPINLOCK)		+= hwspinlock_core.o
 obj-$(CONFIG_HWSPINLOCK_OMAP)		+= omap_hwspinlock.o
+obj-$(CONFIG_HSEM_U8500)		+= u8500_hsem.o
diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
index 43a6271..61c9cf1 100644
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -26,6 +26,7 @@
 #include <linux/radix-tree.h>
 #include <linux/hwspinlock.h>
 #include <linux/pm_runtime.h>
+#include <linux/mutex.h>
 
 #include "hwspinlock_internal.h"
 
@@ -52,10 +53,12 @@
 static RADIX_TREE(hwspinlock_tree, GFP_KERNEL);
 
 /*
- * Synchronization of access to the tree is achieved using this spinlock,
+ * Synchronization of access to the tree is achieved using this mutex,
  * as the radix-tree API requires that users provide all synchronisation.
+ * A mutex is needed because we're using non-atomic radix tree allocations.
  */
-static DEFINE_SPINLOCK(hwspinlock_tree_lock);
+static DEFINE_MUTEX(hwspinlock_tree_lock);
+
 
 /**
  * __hwspin_trylock() - attempt to lock a specific hwspinlock
@@ -114,7 +117,7 @@
 		return -EBUSY;
 
 	/* try to take the hwspinlock device */
-	ret = hwlock->ops->trylock(hwlock);
+	ret = hwlock->bank->ops->trylock(hwlock);
 
 	/* if hwlock is already taken, undo spin_trylock_* and exit */
 	if (!ret) {
@@ -196,8 +199,8 @@
 		 * Allow platform-specific relax handlers to prevent
 		 * hogging the interconnect (no sleeping, though)
 		 */
-		if (hwlock->ops->relax)
-			hwlock->ops->relax(hwlock);
+		if (hwlock->bank->ops->relax)
+			hwlock->bank->ops->relax(hwlock);
 	}
 
 	return ret;
@@ -242,7 +245,7 @@
 	 */
 	mb();
 
-	hwlock->ops->unlock(hwlock);
+	hwlock->bank->ops->unlock(hwlock);
 
 	/* Undo the spin_trylock{_irq, _irqsave} called while locking */
 	if (mode == HWLOCK_IRQSTATE)
@@ -254,68 +257,37 @@
 }
 EXPORT_SYMBOL_GPL(__hwspin_unlock);
 
-/**
- * hwspin_lock_register() - register a new hw spinlock
- * @hwlock: hwspinlock to register.
- *
- * This function should be called from the underlying platform-specific
- * implementation, to register a new hwspinlock instance.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns 0 on success, or an appropriate error code on failure
- */
-int hwspin_lock_register(struct hwspinlock *hwlock)
+static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id)
 {
 	struct hwspinlock *tmp;
 	int ret;
 
-	if (!hwlock || !hwlock->ops ||
-		!hwlock->ops->trylock || !hwlock->ops->unlock) {
-		pr_err("invalid parameters\n");
-		return -EINVAL;
+	mutex_lock(&hwspinlock_tree_lock);
+
+	ret = radix_tree_insert(&hwspinlock_tree, id, hwlock);
+	if (ret) {
+		if (ret == -EEXIST)
+			pr_err("hwspinlock id %d already exists!\n", id);
+		goto out;
 	}
 
-	spin_lock_init(&hwlock->lock);
-
-	spin_lock(&hwspinlock_tree_lock);
-
-	ret = radix_tree_insert(&hwspinlock_tree, hwlock->id, hwlock);
-	if (ret)
-		goto out;
-
 	/* mark this hwspinlock as available */
-	tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
-							HWSPINLOCK_UNUSED);
+	tmp = radix_tree_tag_set(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
 
 	/* self-sanity check which should never fail */
 	WARN_ON(tmp != hwlock);
 
 out:
-	spin_unlock(&hwspinlock_tree_lock);
-	return ret;
+	mutex_unlock(&hwspinlock_tree_lock);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(hwspin_lock_register);
 
-/**
- * hwspin_lock_unregister() - unregister an hw spinlock
- * @id: index of the specific hwspinlock to unregister
- *
- * This function should be called from the underlying platform-specific
- * implementation, to unregister an existing (and unused) hwspinlock.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns the address of hwspinlock @id on success, or NULL on failure
- */
-struct hwspinlock *hwspin_lock_unregister(unsigned int id)
+static struct hwspinlock *hwspin_lock_unregister_single(unsigned int id)
 {
 	struct hwspinlock *hwlock = NULL;
 	int ret;
 
-	spin_lock(&hwspinlock_tree_lock);
+	mutex_lock(&hwspinlock_tree_lock);
 
 	/* make sure the hwspinlock is not in use (tag is set) */
 	ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -331,9 +303,91 @@
 	}
 
 out:
-	spin_unlock(&hwspinlock_tree_lock);
+	mutex_unlock(&hwspinlock_tree_lock);
 	return hwlock;
 }
+
+/**
+ * hwspin_lock_register() - register a new hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ * @dev: the backing device
+ * @ops: hwspinlock handlers for this device
+ * @base_id: id of the first hardware spinlock in this bank
+ * @num_locks: number of hwspinlocks provided by this device
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to register a new hwspinlock device instance.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+		const struct hwspinlock_ops *ops, int base_id, int num_locks)
+{
+	struct hwspinlock *hwlock;
+	int ret = 0, i;
+
+	if (!bank || !ops || !dev || !num_locks || !ops->trylock ||
+							!ops->unlock) {
+		pr_err("invalid parameters\n");
+		return -EINVAL;
+	}
+
+	bank->dev = dev;
+	bank->ops = ops;
+	bank->base_id = base_id;
+	bank->num_locks = num_locks;
+
+	for (i = 0; i < num_locks; i++) {
+		hwlock = &bank->lock[i];
+
+		spin_lock_init(&hwlock->lock);
+		hwlock->bank = bank;
+
+		ret = hwspin_lock_register_single(hwlock, i);
+		if (ret)
+			goto reg_failed;
+	}
+
+	return 0;
+
+reg_failed:
+	while (--i >= 0)
+		hwspin_lock_unregister_single(i);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(hwspin_lock_register);
+
+/**
+ * hwspin_lock_unregister() - unregister an hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to unregister an existing (and unused) hwspinlock.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_unregister(struct hwspinlock_device *bank)
+{
+	struct hwspinlock *hwlock, *tmp;
+	int i;
+
+	for (i = 0; i < bank->num_locks; i++) {
+		hwlock = &bank->lock[i];
+
+		tmp = hwspin_lock_unregister_single(bank->base_id + i);
+		if (!tmp)
+			return -EBUSY;
+
+		/* self-sanity check that should never fail */
+		WARN_ON(tmp != hwlock);
+	}
+
+	return 0;
+}
 EXPORT_SYMBOL_GPL(hwspin_lock_unregister);
 
 /**
@@ -348,24 +402,25 @@
  */
 static int __hwspin_lock_request(struct hwspinlock *hwlock)
 {
+	struct device *dev = hwlock->bank->dev;
 	struct hwspinlock *tmp;
 	int ret;
 
 	/* prevent underlying implementation from being removed */
-	if (!try_module_get(hwlock->owner)) {
-		dev_err(hwlock->dev, "%s: can't get owner\n", __func__);
+	if (!try_module_get(dev->driver->owner)) {
+		dev_err(dev, "%s: can't get owner\n", __func__);
 		return -EINVAL;
 	}
 
 	/* notify PM core that power is now needed */
-	ret = pm_runtime_get_sync(hwlock->dev);
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
-		dev_err(hwlock->dev, "%s: can't power on device\n", __func__);
+		dev_err(dev, "%s: can't power on device\n", __func__);
 		return ret;
 	}
 
 	/* mark hwspinlock as used, should not fail */
-	tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock->id,
+	tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock_to_id(hwlock),
 							HWSPINLOCK_UNUSED);
 
 	/* self-sanity check that should never fail */
@@ -387,7 +442,7 @@
 		return -EINVAL;
 	}
 
-	return hwlock->id;
+	return hwlock_to_id(hwlock);
 }
 EXPORT_SYMBOL_GPL(hwspin_lock_get_id);
 
@@ -400,9 +455,7 @@
  * to the remote core before it can be used for synchronization (to get the
  * id of a given hwlock, use hwspin_lock_get_id()).
  *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
  *
  * Returns the address of the assigned hwspinlock, or NULL on error
  */
@@ -411,7 +464,7 @@
 	struct hwspinlock *hwlock;
 	int ret;
 
-	spin_lock(&hwspinlock_tree_lock);
+	mutex_lock(&hwspinlock_tree_lock);
 
 	/* look for an unused lock */
 	ret = radix_tree_gang_lookup_tag(&hwspinlock_tree, (void **)&hwlock,
@@ -431,7 +484,7 @@
 		hwlock = NULL;
 
 out:
-	spin_unlock(&hwspinlock_tree_lock);
+	mutex_unlock(&hwspinlock_tree_lock);
 	return hwlock;
 }
 EXPORT_SYMBOL_GPL(hwspin_lock_request);
@@ -445,9 +498,7 @@
  * Usually early board code will be calling this function in order to
  * reserve specific hwspinlock ids for predefined purposes.
  *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
  *
  * Returns the address of the assigned hwspinlock, or NULL on error
  */
@@ -456,7 +507,7 @@
 	struct hwspinlock *hwlock;
 	int ret;
 
-	spin_lock(&hwspinlock_tree_lock);
+	mutex_lock(&hwspinlock_tree_lock);
 
 	/* make sure this hwspinlock exists */
 	hwlock = radix_tree_lookup(&hwspinlock_tree, id);
@@ -466,7 +517,7 @@
 	}
 
 	/* sanity check (this shouldn't happen) */
-	WARN_ON(hwlock->id != id);
+	WARN_ON(hwlock_to_id(hwlock) != id);
 
 	/* make sure this hwspinlock is unused */
 	ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -482,7 +533,7 @@
 		hwlock = NULL;
 
 out:
-	spin_unlock(&hwspinlock_tree_lock);
+	mutex_unlock(&hwspinlock_tree_lock);
 	return hwlock;
 }
 EXPORT_SYMBOL_GPL(hwspin_lock_request_specific);
@@ -495,14 +546,13 @@
  * Should only be called with an @hwlock that was retrieved from
  * an earlier call to omap_hwspin_lock_request{_specific}.
  *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
  *
  * Returns 0 on success, or an appropriate error code on failure
  */
 int hwspin_lock_free(struct hwspinlock *hwlock)
 {
+	struct device *dev = hwlock->bank->dev;
 	struct hwspinlock *tmp;
 	int ret;
 
@@ -511,34 +561,34 @@
 		return -EINVAL;
 	}
 
-	spin_lock(&hwspinlock_tree_lock);
+	mutex_lock(&hwspinlock_tree_lock);
 
 	/* make sure the hwspinlock is used */
-	ret = radix_tree_tag_get(&hwspinlock_tree, hwlock->id,
+	ret = radix_tree_tag_get(&hwspinlock_tree, hwlock_to_id(hwlock),
 							HWSPINLOCK_UNUSED);
 	if (ret == 1) {
-		dev_err(hwlock->dev, "%s: hwlock is already free\n", __func__);
+		dev_err(dev, "%s: hwlock is already free\n", __func__);
 		dump_stack();
 		ret = -EINVAL;
 		goto out;
 	}
 
 	/* notify the underlying device that power is not needed */
-	ret = pm_runtime_put(hwlock->dev);
+	ret = pm_runtime_put(dev);
 	if (ret < 0)
 		goto out;
 
 	/* mark this hwspinlock as available */
-	tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
+	tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock_to_id(hwlock),
 							HWSPINLOCK_UNUSED);
 
 	/* sanity check (this shouldn't happen) */
 	WARN_ON(tmp != hwlock);
 
-	module_put(hwlock->owner);
+	module_put(dev->driver->owner);
 
 out:
-	spin_unlock(&hwspinlock_tree_lock);
+	mutex_unlock(&hwspinlock_tree_lock);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(hwspin_lock_free);
diff --git a/drivers/hwspinlock/hwspinlock_internal.h b/drivers/hwspinlock/hwspinlock_internal.h
index 69935e6..d26f78b 100644
--- a/drivers/hwspinlock/hwspinlock_internal.h
+++ b/drivers/hwspinlock/hwspinlock_internal.h
@@ -21,6 +21,8 @@
 #include <linux/spinlock.h>
 #include <linux/device.h>
 
+struct hwspinlock_device;
+
 /**
  * struct hwspinlock_ops - platform-specific hwspinlock handlers
  *
@@ -39,23 +41,37 @@
 
 /**
  * struct hwspinlock - this struct represents a single hwspinlock instance
- *
- * @dev: underlying device, will be used to invoke runtime PM api
- * @ops: platform-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
+ * @bank: the hwspinlock_device structure which owns this lock
  * @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
- *
- * Note: currently simplicity was opted for, but later we can squeeze some
- * memory bytes by grouping the dev, ops and owner members in a single
- * per-platform struct, and have all hwspinlocks point at it.
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
  */
 struct hwspinlock {
+	struct hwspinlock_device *bank;
+	spinlock_t lock;
+	void *priv;
+};
+
+/**
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
+ */
+struct hwspinlock_device {
 	struct device *dev;
 	const struct hwspinlock_ops *ops;
-	int id;
-	spinlock_t lock;
-	struct module *owner;
+	int base_id;
+	int num_locks;
+	struct hwspinlock lock[0];
 };
 
+static inline int hwlock_to_id(struct hwspinlock *hwlock)
+{
+	int local_id = hwlock - &hwlock->bank->lock[0];
+
+	return hwlock->bank->base_id + local_id;
+}
+
 #endif /* __HWSPINLOCK_HWSPINLOCK_H */
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index a8f0273..887d34e 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -41,33 +41,20 @@
 #define SPINLOCK_NOTTAKEN		(0)	/* free */
 #define SPINLOCK_TAKEN			(1)	/* locked */
 
-#define to_omap_hwspinlock(lock)	\
-	container_of(lock, struct omap_hwspinlock, lock)
-
-struct omap_hwspinlock {
-	struct hwspinlock lock;
-	void __iomem *addr;
-};
-
-struct omap_hwspinlock_state {
-	int num_locks;			/* Total number of locks in system */
-	void __iomem *io_base;		/* Mapped base address */
-};
-
 static int omap_hwspinlock_trylock(struct hwspinlock *lock)
 {
-	struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+	void __iomem *lock_addr = lock->priv;
 
 	/* attempt to acquire the lock by reading its value */
-	return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
+	return (SPINLOCK_NOTTAKEN == readl(lock_addr));
 }
 
 static void omap_hwspinlock_unlock(struct hwspinlock *lock)
 {
-	struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+	void __iomem *lock_addr = lock->priv;
 
 	/* release the lock by writing 0 to it */
-	writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
+	writel(SPINLOCK_NOTTAKEN, lock_addr);
 }
 
 /*
@@ -93,26 +80,23 @@
 
 static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
 {
-	struct omap_hwspinlock *omap_lock;
-	struct omap_hwspinlock_state *state;
-	struct hwspinlock *lock;
+	struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+	struct hwspinlock_device *bank;
+	struct hwspinlock *hwlock;
 	struct resource *res;
 	void __iomem *io_base;
-	int i, ret;
+	int num_locks, i, ret;
+
+	if (!pdata)
+		return -ENODEV;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENODEV;
 
-	state = kzalloc(sizeof(*state), GFP_KERNEL);
-	if (!state)
-		return -ENOMEM;
-
 	io_base = ioremap(res->start, resource_size(res));
-	if (!io_base) {
-		ret = -ENOMEM;
-		goto free_state;
-	}
+	if (!io_base)
+		return -ENOMEM;
 
 	/* Determine number of locks */
 	i = readl(io_base + SYSSTATUS_OFFSET);
@@ -124,10 +108,18 @@
 		goto iounmap_base;
 	}
 
-	state->num_locks = i * 32;
-	state->io_base = io_base;
+	num_locks = i * 32; /* actual number of locks in this device */
 
-	platform_set_drvdata(pdev, state);
+	bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+	if (!bank) {
+		ret = -ENOMEM;
+		goto iounmap_base;
+	}
+
+	platform_set_drvdata(pdev, bank);
+
+	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+		hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
 
 	/*
 	 * runtime PM will make sure the clock of this module is
@@ -135,79 +127,46 @@
 	 */
 	pm_runtime_enable(&pdev->dev);
 
-	for (i = 0; i < state->num_locks; i++) {
-		omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
-		if (!omap_lock) {
-			ret = -ENOMEM;
-			goto free_locks;
-		}
-
-		omap_lock->lock.dev = &pdev->dev;
-		omap_lock->lock.owner = THIS_MODULE;
-		omap_lock->lock.id = i;
-		omap_lock->lock.ops = &omap_hwspinlock_ops;
-		omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
-
-		ret = hwspin_lock_register(&omap_lock->lock);
-		if (ret) {
-			kfree(omap_lock);
-			goto free_locks;
-		}
-	}
+	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
+						pdata->base_id, num_locks);
+	if (ret)
+		goto reg_fail;
 
 	return 0;
 
-free_locks:
-	while (--i >= 0) {
-		lock = hwspin_lock_unregister(i);
-		/* this should't happen, but let's give our best effort */
-		if (!lock) {
-			dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
-			continue;
-		}
-		omap_lock = to_omap_hwspinlock(lock);
-		kfree(omap_lock);
-	}
+reg_fail:
 	pm_runtime_disable(&pdev->dev);
+	kfree(bank);
 iounmap_base:
 	iounmap(io_base);
-free_state:
-	kfree(state);
 	return ret;
 }
 
-static int omap_hwspinlock_remove(struct platform_device *pdev)
+static int __devexit omap_hwspinlock_remove(struct platform_device *pdev)
 {
-	struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
-	struct hwspinlock *lock;
-	struct omap_hwspinlock *omap_lock;
-	int i;
+	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+	void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
+	int ret;
 
-	for (i = 0; i < state->num_locks; i++) {
-		lock = hwspin_lock_unregister(i);
-		/* this shouldn't happen at this point. if it does, at least
-		 * don't continue with the remove */
-		if (!lock) {
-			dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
-			return -EBUSY;
-		}
-
-		omap_lock = to_omap_hwspinlock(lock);
-		kfree(omap_lock);
+	ret = hwspin_lock_unregister(bank);
+	if (ret) {
+		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+		return ret;
 	}
 
 	pm_runtime_disable(&pdev->dev);
-	iounmap(state->io_base);
-	kfree(state);
+	iounmap(io_base);
+	kfree(bank);
 
 	return 0;
 }
 
 static struct platform_driver omap_hwspinlock_driver = {
 	.probe		= omap_hwspinlock_probe,
-	.remove		= omap_hwspinlock_remove,
+	.remove		= __devexit_p(omap_hwspinlock_remove),
 	.driver		= {
 		.name	= "omap_hwspinlock",
+		.owner	= THIS_MODULE,
 	},
 };
 
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
new file mode 100644
index 0000000..86980fe
--- /dev/null
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -0,0 +1,197 @@
+/*
+ * u8500 HWSEM driver
+ *
+ * Copyright (C) 2010-2011 ST-Ericsson
+ *
+ * Implements u8500 semaphore handling for protocol 1, no interrupts.
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@linaro.org>
+ * Heavily borrowed from the work of :
+ *   Simon Que <sque@ti.com>
+ *   Hari Kanigeri <h-kanigeri2@ti.com>
+ *   Ohad Ben-Cohen <ohad@wizery.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/*
+ * Implementation of STE's HSem protocol 1 without interrutps.
+ * The only masterID we allow is '0x01' to force people to use
+ * HSems for synchronisation between processors rather than processes
+ * on the ARM core.
+ */
+
+#define U8500_MAX_SEMAPHORE		32	/* a total of 32 semaphore */
+#define RESET_SEMAPHORE			(0)	/* free */
+
+/*
+ * CPU ID for master running u8500 kernel.
+ * Hswpinlocks should only be used to synchonise operations
+ * between the Cortex A9 core and the other CPUs.  Hence
+ * forcing the masterID to a preset value.
+ */
+#define HSEM_MASTER_ID			0x01
+
+#define HSEM_REGISTER_OFFSET		0x08
+
+#define HSEM_CTRL_REG			0x00
+#define HSEM_ICRALL			0x90
+#define HSEM_PROTOCOL_1			0x01
+
+static int u8500_hsem_trylock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	writel(HSEM_MASTER_ID, lock_addr);
+
+	/* get only first 4 bit and compare to masterID.
+	 * if equal, we have the semaphore, otherwise
+	 * someone else has it.
+	 */
+	return (HSEM_MASTER_ID == (0x0F & readl(lock_addr)));
+}
+
+static void u8500_hsem_unlock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* release the lock by writing 0 to it */
+	writel(RESET_SEMAPHORE, lock_addr);
+}
+
+/*
+ * u8500: what value is recommended here ?
+ */
+static void u8500_hsem_relax(struct hwspinlock *lock)
+{
+	ndelay(50);
+}
+
+static const struct hwspinlock_ops u8500_hwspinlock_ops = {
+	.trylock	= u8500_hsem_trylock,
+	.unlock		= u8500_hsem_unlock,
+	.relax		= u8500_hsem_relax,
+};
+
+static int __devinit u8500_hsem_probe(struct platform_device *pdev)
+{
+	struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+	struct hwspinlock_device *bank;
+	struct hwspinlock *hwlock;
+	struct resource *res;
+	void __iomem *io_base;
+	int i, ret, num_locks = U8500_MAX_SEMAPHORE;
+	ulong val;
+
+	if (!pdata)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	io_base = ioremap(res->start, resource_size(res));
+	if (!io_base)
+		return -ENOMEM;
+
+	/* make sure protocol 1 is selected */
+	val = readl(io_base + HSEM_CTRL_REG);
+	writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG);
+
+	/* clear all interrupts */
+	writel(0xFFFF, io_base + HSEM_ICRALL);
+
+	bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+	if (!bank) {
+		ret = -ENOMEM;
+		goto iounmap_base;
+	}
+
+	platform_set_drvdata(pdev, bank);
+
+	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+		hwlock->priv = io_base + HSEM_REGISTER_OFFSET + sizeof(u32) * i;
+
+	/* no pm needed for HSem but required to comply with hwspilock core */
+	pm_runtime_enable(&pdev->dev);
+
+	ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
+						pdata->base_id, num_locks);
+	if (ret)
+		goto reg_fail;
+
+	return 0;
+
+reg_fail:
+	pm_runtime_disable(&pdev->dev);
+	kfree(bank);
+iounmap_base:
+	iounmap(io_base);
+	return ret;
+}
+
+static int __devexit u8500_hsem_remove(struct platform_device *pdev)
+{
+	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+	void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
+	int ret;
+
+	/* clear all interrupts */
+	writel(0xFFFF, io_base + HSEM_ICRALL);
+
+	ret = hwspin_lock_unregister(bank);
+	if (ret) {
+		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	pm_runtime_disable(&pdev->dev);
+	iounmap(io_base);
+	kfree(bank);
+
+	return 0;
+}
+
+static struct platform_driver u8500_hsem_driver = {
+	.probe		= u8500_hsem_probe,
+	.remove		= __devexit_p(u8500_hsem_remove),
+	.driver		= {
+		.name	= "u8500_hsem",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init u8500_hsem_init(void)
+{
+	return platform_driver_register(&u8500_hsem_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(u8500_hsem_init);
+
+static void __exit u8500_hsem_exit(void)
+{
+	platform_driver_unregister(&u8500_hsem_driver);
+}
+module_exit(u8500_hsem_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware Spinlock driver for u8500");
+MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 85584a5..525c734 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -488,7 +488,7 @@
 
 	if (flags & I2C_M_TEN) {
 		/* a ten bit address */
-		addr = 0xf0 | ((msg->addr >> 7) & 0x03);
+		addr = 0xf0 | ((msg->addr >> 7) & 0x06);
 		bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
 		/* try extended address code...*/
 		ret = try_address(i2c_adap, addr, retries);
@@ -498,7 +498,7 @@
 			return -ENXIO;
 		}
 		/* the remaining 8 bit address */
-		ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
+		ret = i2c_outb(i2c_adap, msg->addr & 0xff);
 		if ((ret != 1) && !nak_ok) {
 			/* the chip did not ack / xmission error occurred */
 			dev_err(&i2c_adap->dev, "died at 2nd address code\n");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b2b8562..a3afac4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,7 +110,6 @@
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
 	depends on PCI
-	select MFD_CORE
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -301,7 +300,7 @@
 
 config I2C_AU1550
 	tristate "Au1550/Au1200 SMBus interface"
-	depends on SOC_AU1550 || SOC_AU1200
+	depends on MIPS_ALCHEMY
 	help
 	  If you say yes to this option, support will be included for the
 	  Au1550 and Au1200 SMBus interface.
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 4f757a2..f314d7f 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -36,7 +36,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
 #define PSC_SEL		0x00
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index 835e47b..03b6157 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -593,7 +593,7 @@
 	i2c->adap.algo_data = i2c;
 	i2c->adap.dev.parent = &pdev->dev;
 
-	mfp_set_groupg(&pdev->dev);
+	mfp_set_groupg(&pdev->dev, NULL);
 
 	clk_get_rate(i2c->clk);
 
diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
index b73da6c..632e088 100644
--- a/drivers/i2c/busses/i2c-pxa-pci.c
+++ b/drivers/i2c/busses/i2c-pxa-pci.c
@@ -3,6 +3,7 @@
  * It does not support slave mode, the register slightly moved. This PCI
  * device provides three bars, every contains a single I2C controller.
  */
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/pxa-i2c.h>
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index c418c41..a67132b 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <asm/clock.h>
 #include <asm/i2c-sh7760.h>
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index b050530..46b6500 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/i2c-tegra.h>
 #include <linux/of_i2c.h>
+#include <linux/module.h>
 
 #include <asm/unaligned.h>
 
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index 3ca2e01..10274ff 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/rwsem.h>
 
 #include "i2c-core.h"
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 131079a..1e56061 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -539,8 +539,10 @@
 	client->dev.type = &i2c_client_type;
 	client->dev.of_node = info->of_node;
 
+	/* For 10-bit clients, add an arbitrary offset to avoid collisions */
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
-		     client->addr);
+		     client->addr | ((client->flags & I2C_CLIENT_TEN)
+				     ? 0xa000 : 0));
 	status = device_register(&client->dev);
 	if (status)
 		goto out_err;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index c90ce50..57a45ce8 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -579,7 +579,7 @@
 	return 0;
 }
 
-int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
+static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
 			 void *data)
 {
 	struct device *dev = data;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 76b6d98..5a26584 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -677,19 +677,19 @@
 
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200
+       depends on MIPS_ALCHEMY
        select IDE_XFER_MODE
 choice
        prompt "IDE Mode for AMD Alchemy Au1200"
        default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 
 config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
        bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
 
 config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
-       depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 endchoice
 
 config BLK_DEV_IDE_TX4938
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index b26c234..259786c 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -36,13 +36,17 @@
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1xxx_ide.h>
 
 #define DRV_NAME	"au1200-ide"
 #define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
 
+#ifndef IDE_REG_SHIFT
+#define IDE_REG_SHIFT 5
+#endif
+
 /* enable the burstmode in the dbdma */
 #define IDE_AU1XXX_BURSTMODE	1
 
@@ -317,10 +321,11 @@
 }
 #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
 
-static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
+static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize,
+				 u32 devwidth, u32 flags, u32 regbase)
 {
 	dev->dev_id          = dev_id;
-	dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
+	dev->dev_physaddr    = CPHYSADDR(regbase);
 	dev->dev_intlevel    = 0;
 	dev->dev_intpolarity = 0;
 	dev->dev_tsize       = tsize;
@@ -344,7 +349,7 @@
 	dbdev_tab_t source_dev_tab, target_dev_tab;
 	u32 dev_id, tsize, devwidth, flags;
 
-	dev_id	 = IDE_DDMA_REQ;
+	dev_id	 = hwif->ddma_id;
 
 	tsize    =  8; /*  1 */
 	devwidth = 32; /* 16 */
@@ -356,20 +361,17 @@
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      dev_id,
-			      tsize, devwidth, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* We also need to add a target device for the DMA */
-	auide_init_dbdma_dev( &target_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      tsize, devwidth, DEV_FLAGS_ANYUSE);
+	auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
+			     devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
 	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
  
 	/* Get a channel for TX */
@@ -411,14 +413,12 @@
 #endif
 
 	/* setup dev_tab for tx channel */
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_OUT | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_OUT | flags, auide->regbase);
  	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 
-	auide_init_dbdma_dev( &source_dev_tab,
-			      (u32)DSCR_CMD0_ALWAYS,
-			      8, 32, DEV_FLAGS_IN | flags);
+	auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+			     DEV_FLAGS_IN | flags, auide->regbase);
  	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
 	
 	/* Get a channel for TX */
@@ -540,6 +540,14 @@
 		goto out;
 	}
 
+	res = platform_get_resource(dev, IORESOURCE_DMA, 0);
+	if (!res) {
+		pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
+		ret = -ENODEV;
+		goto out;
+	}
+	ahwif->ddma_id = res->start;
+
 	memset(&hw, 0, sizeof(hw));
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index ab4f169..b1d3859 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -23,6 +23,7 @@
 #include <linux/zorro.h>
 #include <linux/ide.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index cb10201..a81bd75 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -105,6 +105,7 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 67cbcfa..847553f 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- *  Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
  *
  * CYPRESS CY82C693 chipset IDE controller
  *
@@ -90,7 +90,7 @@
 	u8 time_16, time_8;
 
 	/* select primary or secondary channel */
-	if (hwif->index > 0) {  /* drive is on the secondary channel */
+	if (drive->dn > 1) {  /* drive is on the secondary channel */
 		dev = pci_get_slot(dev->bus, dev->devfn+1);
 		if (!dev) {
 			printk(KERN_ERR "%s: tune_drive: "
@@ -141,7 +141,7 @@
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 	}
-	if (hwif->index > 0)
+	if (drive->dn > 1)
 		pci_dev_put(dev);
 }
 
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4a697a2..8716066 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -521,8 +521,8 @@
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		d.init_dma = icside_dma_init;
 		d.port_ops = &icside_v6_port_ops;
+	} else
 		d.dma_ops = NULL;
-	}
 
 	ret = ide_host_register(host, &d, hws);
 	if (ret)
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 2af8cb4..f22edc6 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -17,6 +17,7 @@
 #include <linux/ide.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/module.h>
 
 #include <acpi/acpi_bus.h>
 
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6f218e01..fac3d9d 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/cdrom.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/gfp.h>
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 04b0956..8126824 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -43,7 +43,6 @@
 /* For SCSI -> ATAPI command conversion */
 #include <scsi/scsi.h>
 
-#include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index f9bbd90..8b570a1 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/seq_file.h>
 
 #include "ide-disk.h"
diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c
index e4cdf78..289d16c 100644
--- a/drivers/ide/ide-dma-sff.c
+++ b/drivers/ide/ide-dma-sff.c
@@ -1,5 +1,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d413690..17a65ac 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/gfp.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index c0aa93f..3297066 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -1,5 +1,6 @@
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 #include <linux/delay.h>
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 61fdf544..3d42043 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -35,7 +35,6 @@
 #include <scsi/scsi_ioctl.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
index d711d9b..1600720 100644
--- a/drivers/ide/ide-floppy_proc.c
+++ b/drivers/ide/ide-floppy_proc.c
@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 
diff --git a/drivers/ide/ide-io-std.c b/drivers/ide/ide-io-std.c
index 46721c4..1976397 100644
--- a/drivers/ide/ide-io-std.c
+++ b/drivers/ide/ide-io-std.c
@@ -1,5 +1,6 @@
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 
 #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 9965ecd..4d19eb9 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -2,6 +2,7 @@
  * IDE ioctls handling.
  */
 
+#include <linux/export.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/slab.h>
diff --git a/drivers/ide/ide-legacy.c b/drivers/ide/ide-legacy.c
index b9654a7..30fe363 100644
--- a/drivers/ide/ide-legacy.c
+++ b/drivers/ide/ide-legacy.c
@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ide.h>
 
 static void ide_legacy_init_one(struct ide_hw **hws, struct ide_hw *hw,
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index e386a32..d9c9829 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -1,6 +1,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ide.h>
 #include <linux/bitops.h>
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 017b1df..e5f3db8 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/pnp.h>
 #include <linux/ide.h>
+#include <linux/module.h>
 
 #define DRV_NAME "ide-pnp"
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7ecb1ad..ce8237d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -41,7 +41,6 @@
 #include <scsi/scsi.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 600c89a..5bc2839 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index 5fc8d5c..eb42188 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -1,6 +1,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/ide.h>
 #include <linux/bitops.h>
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 505ec43..adc5fe9 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -17,6 +17,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
+#include <linux/module.h>
 
 #include <asm/macintosh.h>
 #include <asm/macints.h>
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index b59d04c..1892e81 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -331,7 +331,7 @@
 		.udma_mask	= udma,			\
 	}
 
-#define DECLARE_ICH_DEV(udma) \
+#define DECLARE_ICH_DEV(mwdma, udma) \
 	{ \
 		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_ich, \
@@ -340,7 +340,7 @@
 		.port_ops	= &ich_port_ops, \
 		.pio_mask	= ATA_PIO4, \
 		.swdma_mask	= ATA_SWDMA2_ONLY, \
-		.mwdma_mask	= ATA_MWDMA12_ONLY, \
+		.mwdma_mask	= mwdma, \
 		.udma_mask	= udma, \
 	}
 
@@ -362,13 +362,15 @@
 	/* 2: PIIX4 */
 	DECLARE_PIIX_DEV(ATA_UDMA2),
 	/* 3: ICH0 */
-	DECLARE_ICH_DEV(ATA_UDMA2),
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
 	/* 4: ICH */
-	DECLARE_ICH_DEV(ATA_UDMA4),
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
 	/* 5: PIIX4 */
 	DECLARE_PIIX_DEV(ATA_UDMA4),
-	/* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
-	DECLARE_ICH_DEV(ATA_UDMA5),
+	/* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
+	/* 7: ICH7/7-R, no MWDMA1 */
+	DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
 };
 
 /**
@@ -438,9 +440,9 @@
 #endif
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2),      6 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19),    6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    7 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    7 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6),     6 },
 	{ 0, },
 };
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 1db7c43..e944c7f 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/notifier.h>
+#include <linux/module.h>
 #include <linux/reboot.h>
 #include <linux/pci.h>
 #include <linux/adb.h>
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index 9078608..ecd0a69 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/blkdev.h>
 #include <linux/ide.h>
+#include <linux/module.h>
 
 #include <asm/ide.h>
 
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index ab3db61..34a5e52 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
index e444d24..4799d5c 100644
--- a/drivers/ide/tc86c001.c
+++ b/drivers/ide/tc86c001.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
+#include <linux/module.h>
 
 #define DRV_NAME "tc86c001"
 
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index e53a1b7..281c914 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -113,12 +113,26 @@
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
 
+#ifdef CONFIG_PM
+static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	/*
+	 * We must not disable or powerdown the device.
+	 * APM bios refuses to suspend if IDE is not accessible.
+	 */
+	pci_save_state(dev);
+	return 0;
+}
+#else
+#define triflex_ide_pci_suspend NULL
+#endif
+
 static struct pci_driver triflex_pci_driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
+	.suspend	= triflex_ide_pci_suspend,
 	.resume		= ide_pci_resume,
 };
 
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index a46dddf..5d2f8e1 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -61,6 +61,7 @@
 #include <linux/sched.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
+#include <linux/module.h>
 #include <asm/mwait.h>
 #include <asm/msr.h>
 
@@ -81,7 +82,8 @@
 static unsigned int lapic_timer_reliable_states = (1 << 1);	 /* Default to only C1 */
 
 static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
-static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
+static int intel_idle(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv, int index);
 
 static struct cpuidle_state *cpuidle_state_table;
 
@@ -109,7 +111,6 @@
 	{ /* MWAIT C1 */
 		.name = "C1-NHM",
 		.desc = "MWAIT 0x00",
-		.driver_data = (void *) 0x00,
 		.flags = CPUIDLE_FLAG_TIME_VALID,
 		.exit_latency = 3,
 		.target_residency = 6,
@@ -117,7 +118,6 @@
 	{ /* MWAIT C2 */
 		.name = "C3-NHM",
 		.desc = "MWAIT 0x10",
-		.driver_data = (void *) 0x10,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 20,
 		.target_residency = 80,
@@ -125,7 +125,6 @@
 	{ /* MWAIT C3 */
 		.name = "C6-NHM",
 		.desc = "MWAIT 0x20",
-		.driver_data = (void *) 0x20,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 200,
 		.target_residency = 800,
@@ -137,7 +136,6 @@
 	{ /* MWAIT C1 */
 		.name = "C1-SNB",
 		.desc = "MWAIT 0x00",
-		.driver_data = (void *) 0x00,
 		.flags = CPUIDLE_FLAG_TIME_VALID,
 		.exit_latency = 1,
 		.target_residency = 1,
@@ -145,7 +143,6 @@
 	{ /* MWAIT C2 */
 		.name = "C3-SNB",
 		.desc = "MWAIT 0x10",
-		.driver_data = (void *) 0x10,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 80,
 		.target_residency = 211,
@@ -153,7 +150,6 @@
 	{ /* MWAIT C3 */
 		.name = "C6-SNB",
 		.desc = "MWAIT 0x20",
-		.driver_data = (void *) 0x20,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 104,
 		.target_residency = 345,
@@ -161,7 +157,6 @@
 	{ /* MWAIT C4 */
 		.name = "C7-SNB",
 		.desc = "MWAIT 0x30",
-		.driver_data = (void *) 0x30,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 109,
 		.target_residency = 345,
@@ -173,7 +168,6 @@
 	{ /* MWAIT C1 */
 		.name = "C1-ATM",
 		.desc = "MWAIT 0x00",
-		.driver_data = (void *) 0x00,
 		.flags = CPUIDLE_FLAG_TIME_VALID,
 		.exit_latency = 1,
 		.target_residency = 4,
@@ -181,7 +175,6 @@
 	{ /* MWAIT C2 */
 		.name = "C2-ATM",
 		.desc = "MWAIT 0x10",
-		.driver_data = (void *) 0x10,
 		.flags = CPUIDLE_FLAG_TIME_VALID,
 		.exit_latency = 20,
 		.target_residency = 80,
@@ -190,7 +183,6 @@
 	{ /* MWAIT C4 */
 		.name = "C4-ATM",
 		.desc = "MWAIT 0x30",
-		.driver_data = (void *) 0x30,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 100,
 		.target_residency = 400,
@@ -199,23 +191,55 @@
 	{ /* MWAIT C6 */
 		.name = "C6-ATM",
 		.desc = "MWAIT 0x52",
-		.driver_data = (void *) 0x52,
 		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 140,
 		.target_residency = 560,
 		.enter = &intel_idle },
 };
 
+static int get_driver_data(int cstate)
+{
+	int driver_data;
+	switch (cstate) {
+
+	case 1:	/* MWAIT C1 */
+		driver_data = 0x00;
+		break;
+	case 2:	/* MWAIT C2 */
+		driver_data = 0x10;
+		break;
+	case 3:	/* MWAIT C3 */
+		driver_data = 0x20;
+		break;
+	case 4:	/* MWAIT C4 */
+		driver_data = 0x30;
+		break;
+	case 5:	/* MWAIT C5 */
+		driver_data = 0x40;
+		break;
+	case 6:	/* MWAIT C6 */
+		driver_data = 0x52;
+		break;
+	default:
+		driver_data = 0x00;
+	}
+	return driver_data;
+}
+
 /**
  * intel_idle
  * @dev: cpuidle_device
- * @state: cpuidle state
+ * @drv: cpuidle driver
+ * @index: index of cpuidle state
  *
  */
-static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
+static int intel_idle(struct cpuidle_device *dev,
+		struct cpuidle_driver *drv, int index)
 {
 	unsigned long ecx = 1; /* break on interrupt flag */
-	unsigned long eax = (unsigned long)cpuidle_get_statedata(state);
+	struct cpuidle_state *state = &drv->states[index];
+	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
+	unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
 	unsigned int cstate;
 	ktime_t kt_before, kt_after;
 	s64 usec_delta;
@@ -256,7 +280,10 @@
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 
-	return usec_delta;
+	/* Update cpuidle counters */
+	dev->last_residency = (int)usec_delta;
+
+	return index;
 }
 
 static void __setup_broadcast_timer(void *arg)
@@ -397,6 +424,60 @@
 	return;
 }
 /*
+ * intel_idle_cpuidle_driver_init()
+ * allocate, initialize cpuidle_states
+ */
+static int intel_idle_cpuidle_driver_init(void)
+{
+	int cstate;
+	struct cpuidle_driver *drv = &intel_idle_driver;
+
+	drv->state_count = 1;
+
+	for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) {
+		int num_substates;
+
+		if (cstate > max_cstate) {
+			printk(PREFIX "max_cstate %d reached\n",
+				max_cstate);
+			break;
+		}
+
+		/* does the state exist in CPUID.MWAIT? */
+		num_substates = (mwait_substates >> ((cstate) * 4))
+					& MWAIT_SUBSTATE_MASK;
+		if (num_substates == 0)
+			continue;
+		/* is the state not enabled? */
+		if (cpuidle_state_table[cstate].enter == NULL) {
+			/* does the driver not know about the state? */
+			if (*cpuidle_state_table[cstate].name == '\0')
+				pr_debug(PREFIX "unaware of model 0x%x"
+					" MWAIT %d please"
+					" contact lenb@kernel.org",
+				boot_cpu_data.x86_model, cstate);
+			continue;
+		}
+
+		if ((cstate > 2) &&
+			!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			mark_tsc_unstable("TSC halts in idle"
+					" states deeper than C2");
+
+		drv->states[drv->state_count] =	/* structure copy */
+			cpuidle_state_table[cstate];
+
+		drv->state_count += 1;
+	}
+
+	if (auto_demotion_disable_flags)
+		smp_call_function(auto_demotion_disable, NULL, 1);
+
+	return 0;
+}
+
+
+/*
  * intel_idle_cpuidle_devices_init()
  * allocate, initialize, register cpuidle_devices
  */
@@ -430,22 +511,11 @@
 				continue;
 			/* is the state not enabled? */
 			if (cpuidle_state_table[cstate].enter == NULL) {
-				/* does the driver not know about the state? */
-				if (*cpuidle_state_table[cstate].name == '\0')
-					pr_debug(PREFIX "unaware of model 0x%x"
-						" MWAIT %d please"
-						" contact lenb@kernel.org",
-					boot_cpu_data.x86_model, cstate);
 				continue;
 			}
 
-			if ((cstate > 2) &&
-				!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-				mark_tsc_unstable("TSC halts in idle"
-					" states deeper than C2");
-
-			dev->states[dev->state_count] =	/* structure copy */
-				cpuidle_state_table[cstate];
+			dev->states_usage[dev->state_count].driver_data =
+				(void *)get_driver_data(cstate);
 
 			dev->state_count += 1;
 		}
@@ -458,8 +528,6 @@
 			return -EIO;
 		}
 	}
-	if (auto_demotion_disable_flags)
-		smp_call_function(auto_demotion_disable, NULL, 1);
 
 	return 0;
 }
@@ -477,6 +545,7 @@
 	if (retval)
 		return retval;
 
+	intel_idle_cpuidle_driver_init();
 	retval = cpuidle_register_driver(&intel_idle_driver);
 	if (retval) {
 		printk(KERN_DEBUG PREFIX "intel_idle yielding to %s",
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index 236ad9a..e9cf51b 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -37,6 +37,7 @@
 #include <linux/inetdevice.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <net/arp.h>
 #include <net/neighbour.h>
 #include <net/route.h>
@@ -215,7 +216,9 @@
 
 	neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, rt->dst.dev);
 	if (!neigh || !(neigh->nud_state & NUD_VALID)) {
+		rcu_read_lock();
 		neigh_event_send(dst_get_neighbour(&rt->dst), NULL);
+		rcu_read_unlock();
 		ret = -ENODATA;
 		if (neigh)
 			goto release;
@@ -273,15 +276,16 @@
 		goto put;
 	}
 
+	rcu_read_lock();
 	neigh = dst_get_neighbour(dst);
 	if (!neigh || !(neigh->nud_state & NUD_VALID)) {
 		if (neigh)
 			neigh_event_send(neigh, NULL);
 		ret = -ENODATA;
-		goto put;
+	} else {
+		ret = rdma_copy_addr(addr, dst->dev, neigh->ha);
 	}
-
-	ret = rdma_copy_addr(addr, dst->dev, neigh->ha);
+	rcu_read_unlock();
 put:
 	dst_release(dst);
 	return ret;
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 4104ea24..8b72f392 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -36,6 +36,7 @@
 #include <linux/completion.h>
 #include <linux/dma-mapping.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/idr.h>
 #include <linux/interrupt.h>
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 872b184..75ff821 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -41,6 +41,7 @@
 #include <linux/idr.h>
 #include <linux/inetdevice.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <net/tcp.h>
 #include <net/ipv6.h>
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index 4507043..176c8f9 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -33,6 +33,7 @@
 
 #include <linux/errno.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/jhash.h>
 #include <linux/kthread.h>
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index a9c0423..1a696f7 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -45,6 +45,7 @@
 #include <linux/workqueue.h>
 #include <linux/completion.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <rdma/iw_cm.h>
 #include <rdma/ib_addr.h>
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 0563892..2fe428b 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -35,6 +35,7 @@
  */
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <rdma/ib_cache.h>
 
 #include "mad_priv.h"
diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c
index 68b4162..d2360a8 100644
--- a/drivers/infiniband/core/multicast.c
+++ b/drivers/infiniband/core/multicast.c
@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/random.h>
diff --git a/drivers/infiniband/core/netlink.c b/drivers/infiniband/core/netlink.c
index 9227f4a..d1c8196 100644
--- a/drivers/infiniband/core/netlink.c
+++ b/drivers/infiniband/core/netlink.c
@@ -32,6 +32,7 @@
 
 #define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
 
+#include <linux/export.h>
 #include <net/netlink.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
diff --git a/drivers/infiniband/core/packer.c b/drivers/infiniband/core/packer.c
index 019bd4b..1b65986 100644
--- a/drivers/infiniband/core/packer.c
+++ b/drivers/infiniband/core/packer.c
@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/export.h>
 #include <linux/string.h>
 
 #include <rdma/ib_pack.h>
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 2b59b72..c61bca3 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -35,6 +35,7 @@
 #include "core_priv.h"
 
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/string.h>
 
 #include <rdma/ib_mad.h>
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index b69307f..b37b0c0 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -41,6 +41,7 @@
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/module.h>
 
 #include <rdma/rdma_user_cm.h>
 #include <rdma/ib_marshall.h>
diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c
index 9b737ff..72feee6 100644
--- a/drivers/infiniband/core/ud_header.c
+++ b/drivers/infiniband/core/ud_header.c
@@ -33,6 +33,7 @@
 
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <linux/if_ether.h>
 
 #include <rdma/ib_pack.h>
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 9155f91..71f0c0f 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -35,6 +35,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/sched.h>
+#include <linux/export.h>
 #include <linux/hugetlb.h>
 #include <linux/dma-attrs.h>
 #include <linux/slab.h>
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c
index 1b1146f..e7bee46 100644
--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -30,6 +30,7 @@
  * SOFTWARE.
  */
 
+#include <linux/export.h>
 #include <rdma/ib_marshall.h>
 
 void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 4251750..602b1bd 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -38,6 +38,7 @@
 
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index de6d077..c88b12b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1375,8 +1375,10 @@
 		goto reject;
 	}
 	dst = &rt->dst;
+	rcu_read_lock();
 	neigh = dst_get_neighbour(dst);
 	l2t = t3_l2t_get(tdev, neigh, neigh->dev);
+	rcu_read_unlock();
 	if (!l2t) {
 		printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n",
 		       __func__);
@@ -1946,10 +1948,12 @@
 	}
 	ep->dst = &rt->dst;
 
+	rcu_read_lock();
 	neigh = dst_get_neighbour(ep->dst);
 
 	/* get a l2t entry */
 	ep->l2t = t3_l2t_get(ep->com.tdev, neigh, neigh->dev);
+	rcu_read_unlock();
 	if (!ep->l2t) {
 		printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
 		err = -ENOMEM;
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index b36cdac..0747004 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -542,8 +542,10 @@
 		     (mpa_rev_to_use == 2 ? MPA_ENHANCED_RDMA_CONN : 0);
 	mpa->private_data_size = htons(ep->plen);
 	mpa->revision = mpa_rev_to_use;
-	if (mpa_rev_to_use == 1)
+	if (mpa_rev_to_use == 1) {
 		ep->tried_with_mpa_v1 = 1;
+		ep->retry_with_mpa_v1 = 0;
+	}
 
 	if (mpa_rev_to_use == 2) {
 		mpa->private_data_size +=
@@ -1594,6 +1596,7 @@
 		goto reject;
 	}
 	dst = &rt->dst;
+	rcu_read_lock();
 	neigh = dst_get_neighbour(dst);
 	if (neigh->dev->flags & IFF_LOOPBACK) {
 		pdev = ip_dev_find(&init_net, peer_ip);
@@ -1620,6 +1623,7 @@
 		rss_qid = dev->rdev.lldi.rxq_ids[
 			  cxgb4_port_idx(neigh->dev) * step];
 	}
+	rcu_read_unlock();
 	if (!l2t) {
 		printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n",
 		       __func__);
@@ -1820,6 +1824,7 @@
 	}
 	ep->dst = &rt->dst;
 
+	rcu_read_lock();
 	neigh = dst_get_neighbour(ep->dst);
 
 	/* get a l2t entry */
@@ -1856,6 +1861,7 @@
 		ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
 			cxgb4_port_idx(neigh->dev) * step];
 	}
+	rcu_read_unlock();
 	if (!ep->l2t) {
 		printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
 		err = -ENOMEM;
@@ -2301,6 +2307,7 @@
 	}
 	ep->dst = &rt->dst;
 
+	rcu_read_lock();
 	neigh = dst_get_neighbour(ep->dst);
 
 	/* get a l2t entry */
@@ -2339,6 +2346,7 @@
 		ep->retry_with_mpa_v1 = 0;
 		ep->tried_with_mpa_v1 = 0;
 	}
+	rcu_read_unlock();
 	if (!ep->l2t) {
 		printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
 		err = -ENOMEM;
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index f35a935..0f1607c 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -311,7 +311,7 @@
 	while (ptr != cq->sw_pidx) {
 		cqe = &cq->sw_queue[ptr];
 		if (RQ_TYPE(cqe) && (CQE_OPCODE(cqe) != FW_RI_READ_RESP) &&
-		    (CQE_QPID(cqe) == wq->rq.qid) && cqe_completes_wr(cqe, wq))
+		    (CQE_QPID(cqe) == wq->sq.qid) && cqe_completes_wr(cqe, wq))
 			(*count)++;
 		if (++ptr == cq->size)
 			ptr = 0;
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index d6ccc7e..5f940ae 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -29,6 +29,9 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+
+#include <linux/module.h>
+
 #include "iw_cxgb4.h"
 
 static int ocqp_support = 1;
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index daef61d..714293b 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -45,6 +45,7 @@
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
+#include <linux/export.h>
 #include <asm/uaccess.h>
 
 #include "ipath_kernel.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index be24ac7..bfca37b 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -41,6 +41,7 @@
 #include <linux/vmalloc.h>
 #include <linux/bitmap.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "ipath_kernel.h"
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 8697eca..736d9ed 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -35,6 +35,7 @@
 #include <linux/poll.h>
 #include <linux/cdev.h>
 #include <linux/swap.h>
+#include <linux/export.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/highmem.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 824a4d5..49b09c6 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -33,6 +33,7 @@
 
 #include <linux/pci.h>
 #include <linux/netdevice.h>
+#include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 8991677..75558f3 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/ctype.h>
+#include <linux/stat.h>
 
 #include "ipath_kernel.h"
 #include "ipath_verbs.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index dd7f26d..439c35d 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -35,6 +35,7 @@
 #include <rdma/ib_user_verbs.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/utsname.h>
 #include <linux/rculist.h>
 
diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c
index e4a08c2..712d2a3 100644
--- a/drivers/infiniband/hw/mthca/mthca_catas.c
+++ b/drivers/infiniband/hw/mthca/mthca_catas.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/jiffies.h>
+#include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 3082b3b..9d3e5c1 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -36,6 +36,7 @@
 #include <linux/pci.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <asm/io.h>
 #include <rdma/ib_mad.h>
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index ab876f9..ed9a989 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -146,7 +146,7 @@
 
 	buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *),
 			      GFP_KERNEL);
-	buddy->num_free = kzalloc((buddy->max_order + 1) * sizeof (int *),
+	buddy->num_free = kcalloc((buddy->max_order + 1), sizeof *buddy->num_free,
 				  GFP_KERNEL);
 	if (!buddy->bits || !buddy->num_free)
 		goto err_out;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index cb9a0b9..5b71d43 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -40,7 +40,9 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/mm.h>
+#include <linux/export.h>
 
 #include "mthca_dev.h"
 #include "mthca_cmd.h"
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index dfce9ea..0a52d72 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1377,9 +1377,11 @@
 		neigh_release(neigh);
 	}
 
-	if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID)))
+	if ((neigh == NULL) || (!(neigh->nud_state & NUD_VALID))) {
+		rcu_read_lock();
 		neigh_event_send(dst_get_neighbour(&rt->dst), NULL);
-
+		rcu_read_unlock();
+	}
 	ip_rt_put(rt);
 	return rc;
 }
diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
index 204c4dd..9892456 100644
--- a/drivers/infiniband/hw/qib/qib_diag.c
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -46,6 +46,7 @@
 #include <linux/pci.h>
 #include <linux/poll.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/fs.h>
 #include <linux/uaccess.h>
 
diff --git a/drivers/infiniband/hw/qib/qib_driver.c b/drivers/infiniband/hw/qib/qib_driver.c
index 9a9047f..c90a55f 100644
--- a/drivers/infiniband/hw/qib/qib_driver.c
+++ b/drivers/infiniband/hw/qib/qib_driver.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 #include "qib.h"
 
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 7763366..574600e 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -43,6 +43,7 @@
 #include <linux/jiffies.h>
 #include <asm/pgtable.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include "qib.h"
 #include "qib_common.h"
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index 3f1d562..439d3c5 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -39,6 +39,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <rdma/ib_verbs.h>
 
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index efd0a11..1d58959 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -40,6 +40,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
+#include <linux/module.h>
 #include <rdma/ib_verbs.h>
 #include <rdma/ib_smi.h>
 
@@ -2306,19 +2307,11 @@
 		SYM_LSB(IBCCtrlA_0, MaxPktLen);
 	ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */
 
-	/* initially come up waiting for TS1, without sending anything. */
-	val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
-		QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
-
-	ppd->cpspec->ibcctrl_a = val;
 	/*
 	 * Reset the PCS interface to the serdes (and also ibc, which is still
 	 * in reset from above).  Writes new value of ibcctrl_a as last step.
 	 */
 	qib_7322_mini_pcs_reset(ppd);
-	qib_write_kreg(dd, kr_scratch, 0ULL);
-	/* clear the linkinit cmds */
-	ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
 
 	if (!ppd->cpspec->ibcctrl_b) {
 		unsigned lse = ppd->link_speed_enabled;
@@ -2384,6 +2377,14 @@
 	ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn);
 	set_vls(ppd);
 
+	/* initially come up DISABLED, without sending anything. */
+	val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
+					QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+	qib_write_kreg_port(ppd, krp_ibcctrl_a, val);
+	qib_write_kreg(dd, kr_scratch, 0ULL);
+	/* clear the linkinit cmds */
+	ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
+
 	/* be paranoid against later code motion, etc. */
 	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
 	ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable);
@@ -5240,7 +5241,7 @@
 			   off */
 			if (ppd->dd->flags & QIB_HAS_QSFP) {
 				qd->t_insert = get_jiffies_64();
-				schedule_work(&qd->work);
+				queue_work(ib_wq, &qd->work);
 			}
 			spin_lock_irqsave(&ppd->sdma_lock, flags);
 			if (__qib_sdma_running(ppd))
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index b093a0b..58b0f8a 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -37,6 +37,7 @@
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/idr.h>
+#include <linux/module.h>
 
 #include "qib.h"
 #include "qib_common.h"
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 4426782..97a8bdf 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/aer.h>
+#include <linux/module.h>
 
 #include "qib.h"
 
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c
index e06c4ed..fa71b1e 100644
--- a/drivers/infiniband/hw/qib/qib_qsfp.c
+++ b/drivers/infiniband/hw/qib/qib_qsfp.c
@@ -480,18 +480,6 @@
 	udelay(20); /* Generous RST dwell */
 
 	dd->f_gpio_mod(dd, mask, mask, mask);
-	/* Spec says module can take up to two seconds! */
-	mask = QSFP_GPIO_MOD_PRS_N;
-	if (qd->ppd->hw_pidx)
-		mask <<= QSFP_GPIO_PORT2_SHIFT;
-
-	/* Do not try to wait here. Better to let event handle it */
-	if (!qib_qsfp_mod_present(qd->ppd))
-		goto bail;
-	/* We see a module, but it may be unwise to look yet. Just schedule */
-	qd->t_insert = get_jiffies_64();
-	queue_work(ib_wq, &qd->work);
-bail:
 	return;
 }
 
diff --git a/drivers/infiniband/hw/qib/qib_rc.c b/drivers/infiniband/hw/qib/qib_rc.c
index afaf4ac..894afac 100644
--- a/drivers/infiniband/hw/qib/qib_rc.c
+++ b/drivers/infiniband/hw/qib/qib_rc.c
@@ -271,13 +271,9 @@
 			goto bail;
 		}
 		wqe = get_swqe_ptr(qp, qp->s_last);
-		while (qp->s_last != qp->s_acked) {
-			qib_send_complete(qp, wqe, IB_WC_SUCCESS);
-			if (++qp->s_last >= qp->s_size)
-				qp->s_last = 0;
-			wqe = get_swqe_ptr(qp, qp->s_last);
-		}
-		qib_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+		qib_send_complete(qp, wqe, qp->s_last != qp->s_acked ?
+			IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR);
+		/* will get called again */
 		goto done;
 	}
 
diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c
index e9f9f8b..de1a4b2 100644
--- a/drivers/infiniband/hw/qib/qib_sd7220.c
+++ b/drivers/infiniband/hw/qib/qib_sd7220.c
@@ -38,6 +38,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 
 #include "qib.h"
diff --git a/drivers/infiniband/hw/qib/qib_sdma.c b/drivers/infiniband/hw/qib/qib_sdma.c
index cad4449..12a9604 100644
--- a/drivers/infiniband/hw/qib/qib_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_sdma.c
@@ -32,6 +32,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/netdevice.h>
+#include <linux/moduleparam.h>
 
 #include "qib.h"
 #include "qib_common.h"
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
index 7f36454..1bf626c 100644
--- a/drivers/infiniband/hw/qib/qib_tx.c
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
+#include <linux/moduleparam.h>
 
 #include "qib.h"
 
diff --git a/drivers/infiniband/hw/qib/qib_verbs.c b/drivers/infiniband/hw/qib/qib_verbs.c
index 9627cb73..a894762 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.c
+++ b/drivers/infiniband/hw/qib/qib_verbs.c
@@ -35,6 +35,7 @@
 #include <rdma/ib_mad.h>
 #include <rdma/ib_user_verbs.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/utsname.h>
 #include <linux/rculist.h>
 #include <linux/mm.h>
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 231c2f2..014504d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/moduleparam.h>
 
 #include "ipoib.h"
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
index 0e2fe463..5006185 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
@@ -37,6 +37,7 @@
 struct file_operations;
 
 #include <linux/debugfs.h>
+#include <linux/export.h>
 
 #include "ipoib.h"
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 2b060f4..4115be54 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -34,6 +34,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 
@@ -56,21 +57,24 @@
 				 struct ib_pd *pd, struct ib_ah_attr *attr)
 {
 	struct ipoib_ah *ah;
+	struct ib_ah *vah;
 
 	ah = kmalloc(sizeof *ah, GFP_KERNEL);
 	if (!ah)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	ah->dev       = dev;
 	ah->last_send = 0;
 	kref_init(&ah->ref);
 
-	ah->ah = ib_create_ah(pd, attr);
-	if (IS_ERR(ah->ah)) {
+	vah = ib_create_ah(pd, attr);
+	if (IS_ERR(vah)) {
 		kfree(ah);
-		ah = NULL;
-	} else
+		ah = (struct ipoib_ah *)vah;
+	} else {
+		ah->ah = vah;
 		ipoib_dbg(netdev_priv(dev), "Created ah %p\n", ah->ah);
+	}
 
 	return ah;
 }
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 7567b60..83695b4 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -432,7 +432,7 @@
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	if (ah) {
+	if (!IS_ERR_OR_NULL(ah)) {
 		path->pathrec = *pathrec;
 
 		old_ah   = path->ah;
@@ -555,6 +555,7 @@
 	return 0;
 }
 
+/* called with rcu_read_lock */
 static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -636,6 +637,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+/* called with rcu_read_lock */
 static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(skb->dev);
@@ -720,13 +722,14 @@
 	struct neighbour *n = NULL;
 	unsigned long flags;
 
+	rcu_read_lock();
 	if (likely(skb_dst(skb)))
 		n = dst_get_neighbour(skb_dst(skb));
 
 	if (likely(n)) {
 		if (unlikely(!*to_ipoib_neigh(n))) {
 			ipoib_path_lookup(skb, dev);
-			return NETDEV_TX_OK;
+			goto unlock;
 		}
 
 		neigh = *to_ipoib_neigh(n);
@@ -749,17 +752,17 @@
 			ipoib_neigh_free(dev, neigh);
 			spin_unlock_irqrestore(&priv->lock, flags);
 			ipoib_path_lookup(skb, dev);
-			return NETDEV_TX_OK;
+			goto unlock;
 		}
 
 		if (ipoib_cm_get(neigh)) {
 			if (ipoib_cm_up(neigh)) {
 				ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
-				return NETDEV_TX_OK;
+				goto unlock;
 			}
 		} else if (neigh->ah) {
 			ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(n->ha));
-			return NETDEV_TX_OK;
+			goto unlock;
 		}
 
 		if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
@@ -793,13 +796,14 @@
 					   phdr->hwaddr + 4);
 				dev_kfree_skb_any(skb);
 				++dev->stats.tx_dropped;
-				return NETDEV_TX_OK;
+				goto unlock;
 			}
 
 			unicast_arp_send(skb, dev, phdr);
 		}
 	}
-
+unlock:
+	rcu_read_unlock();
 	return NETDEV_TX_OK;
 }
 
@@ -837,7 +841,7 @@
 	dst = skb_dst(skb);
 	n = NULL;
 	if (dst)
-		n = dst_get_neighbour(dst);
+		n = dst_get_neighbour_raw(dst);
 	if ((!dst || !n) && daddr) {
 		struct ipoib_pseudoheader *phdr =
 			(struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index ecea4fe..873bff9 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -34,6 +34,7 @@
 
 #include <linux/skbuff.h>
 #include <linux/rtnetlink.h>
+#include <linux/moduleparam.h>
 #include <linux/ip.h>
 #include <linux/in.h>
 #include <linux/igmp.h>
@@ -239,8 +240,11 @@
 		av.grh.dgid = mcast->mcmember.mgid;
 
 		ah = ipoib_create_ah(dev, priv->pd, &av);
-		if (!ah) {
-			ipoib_warn(priv, "ib_address_create failed\n");
+		if (IS_ERR(ah)) {
+			ipoib_warn(priv, "ib_address_create failed %ld\n",
+				-PTR_ERR(ah));
+			/* use original error */
+			return PTR_ERR(ah);
 		} else {
 			spin_lock_irq(&priv->lock);
 			mcast->ah = ah;
@@ -265,7 +269,7 @@
 
 		skb->dev = dev;
 		if (dst)
-			n = dst_get_neighbour(dst);
+			n = dst_get_neighbour_raw(dst);
 		if (!dst || !n) {
 			/* put pseudoheader back on for next time */
 			skb_push(skb, sizeof (struct ipoib_pseudoheader));
@@ -721,6 +725,8 @@
 	if (mcast && mcast->ah) {
 		struct dst_entry *dst = skb_dst(skb);
 		struct neighbour *n = NULL;
+
+		rcu_read_lock();
 		if (dst)
 			n = dst_get_neighbour(dst);
 		if (n && !*to_ipoib_neigh(n)) {
@@ -733,7 +739,7 @@
 				list_add_tail(&neigh->list, &mcast->neigh_list);
 			}
 		}
-
+		rcu_read_unlock();
 		spin_unlock_irqrestore(&priv->lock, flags);
 		ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN);
 		return;
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 84e8c29..7e7373a 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -57,6 +57,7 @@
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <net/sock.h>
 
@@ -151,7 +152,6 @@
 	tx_desc->tx_sg[0].length = ISER_HEADERS_LEN;
 	tx_desc->tx_sg[0].lkey   = device->mr->lkey;
 
-	iser_task->headers_initialized	= 1;
 	iser_task->iser_conn		= iser_conn;
 	return 0;
 }
@@ -166,8 +166,7 @@
 {
 	struct iscsi_iser_task *iser_task = task->dd_data;
 
-	if (!iser_task->headers_initialized)
-		if (iser_initialize_task_headers(task, &iser_task->desc))
+	if (iser_initialize_task_headers(task, &iser_task->desc))
 			return -ENOMEM;
 
 	/* mgmt task */
@@ -278,6 +277,13 @@
 static void iscsi_iser_cleanup_task(struct iscsi_task *task)
 {
 	struct iscsi_iser_task *iser_task = task->dd_data;
+	struct iser_tx_desc	*tx_desc = &iser_task->desc;
+
+	struct iscsi_iser_conn *iser_conn = task->conn->dd_data;
+	struct iser_device     *device    = iser_conn->ib_conn->device;
+
+	ib_dma_unmap_single(device->ib_device,
+		tx_desc->dma_addr, ISER_HEADERS_LEN, DMA_TO_DEVICE);
 
 	/* mgmt tasks do not need special cleanup */
 	if (!task->sc)
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index db6f3ce..db7ea37 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -257,7 +257,8 @@
 	struct list_head	     conn_list;       /* entry in ig conn list */
 
 	char  			     *login_buf;
-	u64 			     login_dma;
+	char			     *login_req_buf, *login_resp_buf;
+	u64			     login_req_dma, login_resp_dma;
 	unsigned int 		     rx_desc_head;
 	struct iser_rx_desc	     *rx_descs;
 	struct ib_recv_wr	     rx_wr[ISER_MIN_POSTED_RX];
@@ -277,7 +278,6 @@
 	struct iser_regd_buf         rdma_regd[ISER_DIRS_NUM];/* regd rdma buf */
 	struct iser_data_buf         data[ISER_DIRS_NUM];     /* orig. data des*/
 	struct iser_data_buf         data_copy[ISER_DIRS_NUM];/* contig. copy  */
-	int                          headers_initialized;
 };
 
 struct iser_page_vec {
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index f299de6..a607542 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -221,8 +221,14 @@
 	struct iser_device *device = ib_conn->device;
 
 	if (ib_conn->login_buf) {
-		ib_dma_unmap_single(device->ib_device, ib_conn->login_dma,
-			ISER_RX_LOGIN_SIZE, DMA_FROM_DEVICE);
+		if (ib_conn->login_req_dma)
+			ib_dma_unmap_single(device->ib_device,
+				ib_conn->login_req_dma,
+				ISCSI_DEF_MAX_RECV_SEG_LEN, DMA_TO_DEVICE);
+		if (ib_conn->login_resp_dma)
+			ib_dma_unmap_single(device->ib_device,
+				ib_conn->login_resp_dma,
+				ISER_RX_LOGIN_SIZE, DMA_FROM_DEVICE);
 		kfree(ib_conn->login_buf);
 	}
 
@@ -394,6 +400,7 @@
 	unsigned long data_seg_len;
 	int err = 0;
 	struct iser_device *device;
+	struct iser_conn *ib_conn = iser_conn->ib_conn;
 
 	/* build the tx desc regd header and add it to the tx desc dto */
 	mdesc->type = ISCSI_TX_CONTROL;
@@ -409,9 +416,19 @@
 			iser_err("data present on non login task!!!\n");
 			goto send_control_error;
 		}
-		memcpy(iser_conn->ib_conn->login_buf, task->data,
+
+		ib_dma_sync_single_for_cpu(device->ib_device,
+			ib_conn->login_req_dma, task->data_count,
+			DMA_TO_DEVICE);
+
+		memcpy(iser_conn->ib_conn->login_req_buf, task->data,
 							task->data_count);
-		tx_dsg->addr    = iser_conn->ib_conn->login_dma;
+
+		ib_dma_sync_single_for_device(device->ib_device,
+			ib_conn->login_req_dma, task->data_count,
+			DMA_TO_DEVICE);
+
+		tx_dsg->addr    = iser_conn->ib_conn->login_req_dma;
 		tx_dsg->length  = task->data_count;
 		tx_dsg->lkey    = device->mr->lkey;
 		mdesc->num_sge = 2;
@@ -445,8 +462,8 @@
 	int rx_buflen, outstanding, count, err;
 
 	/* differentiate between login to all other PDUs */
-	if ((char *)rx_desc == ib_conn->login_buf) {
-		rx_dma = ib_conn->login_dma;
+	if ((char *)rx_desc == ib_conn->login_resp_buf) {
+		rx_dma = ib_conn->login_resp_dma;
 		rx_buflen = ISER_RX_LOGIN_SIZE;
 	} else {
 		rx_dma = rx_desc->dma_addr;
@@ -473,7 +490,7 @@
 	 * for the posted rx bufs refcount to become zero handles everything   */
 	conn->ib_conn->post_recv_buf_count--;
 
-	if (rx_dma == ib_conn->login_dma)
+	if (rx_dma == ib_conn->login_resp_dma)
 		return;
 
 	outstanding = ib_conn->post_recv_buf_count;
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index ede1475..e28877c 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -155,20 +155,39 @@
 {
 	struct iser_device	*device;
 	struct ib_qp_init_attr	init_attr;
-	int			ret = -ENOMEM;
+	int			req_err, resp_err, ret = -ENOMEM;
 	struct ib_fmr_pool_param params;
 
 	BUG_ON(ib_conn->device == NULL);
 
 	device = ib_conn->device;
 
-	ib_conn->login_buf = kmalloc(ISER_RX_LOGIN_SIZE, GFP_KERNEL);
+	ib_conn->login_buf = kmalloc(ISCSI_DEF_MAX_RECV_SEG_LEN +
+					ISER_RX_LOGIN_SIZE, GFP_KERNEL);
 	if (!ib_conn->login_buf)
 		goto out_err;
 
-	ib_conn->login_dma = ib_dma_map_single(ib_conn->device->ib_device,
-				(void *)ib_conn->login_buf, ISER_RX_LOGIN_SIZE,
-				DMA_FROM_DEVICE);
+	ib_conn->login_req_buf  = ib_conn->login_buf;
+	ib_conn->login_resp_buf = ib_conn->login_buf + ISCSI_DEF_MAX_RECV_SEG_LEN;
+
+	ib_conn->login_req_dma = ib_dma_map_single(ib_conn->device->ib_device,
+				(void *)ib_conn->login_req_buf,
+				ISCSI_DEF_MAX_RECV_SEG_LEN, DMA_TO_DEVICE);
+
+	ib_conn->login_resp_dma = ib_dma_map_single(ib_conn->device->ib_device,
+				(void *)ib_conn->login_resp_buf,
+				ISER_RX_LOGIN_SIZE, DMA_FROM_DEVICE);
+
+	req_err  = ib_dma_mapping_error(device->ib_device, ib_conn->login_req_dma);
+	resp_err = ib_dma_mapping_error(device->ib_device, ib_conn->login_resp_dma);
+
+	if (req_err || resp_err) {
+		if (req_err)
+			ib_conn->login_req_dma = 0;
+		if (resp_err)
+			ib_conn->login_resp_dma = 0;
+		goto out_err;
+	}
 
 	ib_conn->page_vec = kmalloc(sizeof(struct iser_page_vec) +
 				    (sizeof(u64) * (ISCSI_ISER_SG_TABLESIZE +1)),
@@ -658,11 +677,11 @@
 	struct ib_sge	  sge;
 	int ib_ret;
 
-	sge.addr   = ib_conn->login_dma;
+	sge.addr   = ib_conn->login_resp_dma;
 	sge.length = ISER_RX_LOGIN_SIZE;
 	sge.lkey   = ib_conn->device->mr->lkey;
 
-	rx_wr.wr_id   = (unsigned long)ib_conn->login_buf;
+	rx_wr.wr_id   = (unsigned long)ib_conn->login_resp_buf;
 	rx_wr.sg_list = &sge;
 	rx_wr.num_sge = 1;
 	rx_wr.next    = NULL;
diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c
index 1accb89..e46a867 100644
--- a/drivers/input/input-compat.c
+++ b/drivers/input/input-compat.c
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <asm/uaccess.h>
 #include "input-compat.h"
 
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index 9150ee7..f658086 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/input/mt.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #define TRKID_SGN	((TRKID_MAX + 1) >> 1)
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index b253973..7dfe100 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <linux/input-polldev.h>
 
 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
index f6732b5..6d6e741 100644
--- a/drivers/input/joystick/as5011.c
+++ b/drivers/input/joystick/as5011.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/input/as5011.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
 #define MODULE_DEVICE_ALIAS "as5011"
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 6e0f230..fcdec5e 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -18,6 +18,7 @@
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 
 #include <plat/ske.h>
 
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index 1c58681..66e55e5 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/module.h>
 
 #define BITS(x)			(BIT(x) - 1)
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 56aa465..22d875f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -134,6 +134,16 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called max8925_onkey.
 
+config INPUT_MC13783_PWRBUTTON
+	tristate "MC13783 ON buttons"
+	depends on MFD_MC13783
+	help
+	  Support the ON buttons of MC13783 PMIC as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mc13783-pwrbutton.
+
 config INPUT_MMA8450
 	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
 	depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 62dcd79..a244fc6 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -28,6 +28,7 @@
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
+obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
 obj-$(CONFIG_INPUT_MPU3050)		+= mpu3050.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index ca42c7d..0ac75bb 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/input/ad714x.h>
+#include <linux/module.h>
 #include "ad714x.h"
 
 #define AD714X_PWR_CTRL           0x0
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 144ddbd..0924480 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/input/adxl34x.h>
+#include <linux/module.h>
 
 #include "adxl34x.h"
 
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 1de58e8..8d345e8 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -11,6 +11,7 @@
 
 #include <linux/usb/input.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC    "ATI/Philips USB RF remote driver"
 #define DRIVER_VERSION "0.3"
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 1633b63..80793f1 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/input/cma3000.h>
+#include <linux/module.h>
 
 #include "cma3000_d0x.h"
 
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index 19af682..7283dd2 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/i2c/dm355evm_msp.h>
+#include <linux/module.h>
 
 
 /*
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
new file mode 100644
index 0000000..09b0522
--- /dev/null
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -0,0 +1,282 @@
+/**
+ * Copyright (C) 2011 Philippe Rétornaz
+ *
+ * Based on twl4030-pwrbutton driver by:
+ *     Peter De Schrijver <peter.de-schrijver@nokia.com>
+ *     Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+struct mc13783_pwrb {
+	struct input_dev *pwr;
+	struct mc13xxx *mc13783;
+#define MC13783_PWRB_B1_POL_INVERT	(1 << 0)
+#define MC13783_PWRB_B2_POL_INVERT	(1 << 1)
+#define MC13783_PWRB_B3_POL_INVERT	(1 << 2)
+	int flags;
+	unsigned short keymap[3];
+};
+
+#define MC13783_REG_INTERRUPT_SENSE_1		5
+#define MC13783_IRQSENSE1_ONOFD1S		(1 << 3)
+#define MC13783_IRQSENSE1_ONOFD2S		(1 << 4)
+#define MC13783_IRQSENSE1_ONOFD3S		(1 << 5)
+
+#define MC13783_REG_POWER_CONTROL_2		15
+#define MC13783_POWER_CONTROL_2_ON1BDBNC	4
+#define MC13783_POWER_CONTROL_2_ON2BDBNC	6
+#define MC13783_POWER_CONTROL_2_ON3BDBNC	8
+#define MC13783_POWER_CONTROL_2_ON1BRSTEN	(1 << 1)
+#define MC13783_POWER_CONTROL_2_ON2BRSTEN	(1 << 2)
+#define MC13783_POWER_CONTROL_2_ON3BRSTEN	(1 << 3)
+
+static irqreturn_t button_irq(int irq, void *_priv)
+{
+	struct mc13783_pwrb *priv = _priv;
+	int val;
+
+	mc13xxx_irq_ack(priv->mc13783, irq);
+	mc13xxx_reg_read(priv->mc13783, MC13783_REG_INTERRUPT_SENSE_1, &val);
+
+	switch (irq) {
+	case MC13783_IRQ_ONOFD1:
+		val = val & MC13783_IRQSENSE1_ONOFD1S ? 1 : 0;
+		if (priv->flags & MC13783_PWRB_B1_POL_INVERT)
+			val ^= 1;
+		input_report_key(priv->pwr, priv->keymap[0], val);
+		break;
+
+	case MC13783_IRQ_ONOFD2:
+		val = val & MC13783_IRQSENSE1_ONOFD2S ? 1 : 0;
+		if (priv->flags & MC13783_PWRB_B2_POL_INVERT)
+			val ^= 1;
+		input_report_key(priv->pwr, priv->keymap[1], val);
+		break;
+
+	case MC13783_IRQ_ONOFD3:
+		val = val & MC13783_IRQSENSE1_ONOFD3S ? 1 : 0;
+		if (priv->flags & MC13783_PWRB_B3_POL_INVERT)
+			val ^= 1;
+		input_report_key(priv->pwr, priv->keymap[2], val);
+		break;
+	}
+
+	input_sync(priv->pwr);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit mc13783_pwrbutton_probe(struct platform_device *pdev)
+{
+	const struct mc13xxx_buttons_platform_data *pdata;
+	struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
+	struct input_dev *pwr;
+	struct mc13783_pwrb *priv;
+	int err = 0;
+	int reg = 0;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	pwr = input_allocate_device();
+	if (!pwr) {
+		dev_dbg(&pdev->dev, "Can't allocate power button\n");
+		return -ENOMEM;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		dev_dbg(&pdev->dev, "Can't allocate power button\n");
+		goto free_input_dev;
+	}
+
+	reg |= (pdata->b1on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
+	reg |= (pdata->b2on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
+	reg |= (pdata->b3on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
+
+	priv->pwr = pwr;
+	priv->mc13783 = mc13783;
+
+	mc13xxx_lock(mc13783);
+
+	if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) {
+		priv->keymap[0] = pdata->b1on_key;
+		if (pdata->b1on_key != KEY_RESERVED)
+			__set_bit(pdata->b1on_key, pwr->keybit);
+
+		if (pdata->b1on_flags & MC13783_BUTTON_POL_INVERT)
+			priv->flags |= MC13783_PWRB_B1_POL_INVERT;
+
+		if (pdata->b1on_flags & MC13783_BUTTON_RESET_EN)
+			reg |= MC13783_POWER_CONTROL_2_ON1BRSTEN;
+
+		err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD1,
+					  button_irq, "b1on", priv);
+		if (err) {
+			dev_dbg(&pdev->dev, "Can't request irq\n");
+			goto free_priv;
+		}
+	}
+
+	if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) {
+		priv->keymap[1] = pdata->b2on_key;
+		if (pdata->b2on_key != KEY_RESERVED)
+			__set_bit(pdata->b2on_key, pwr->keybit);
+
+		if (pdata->b2on_flags & MC13783_BUTTON_POL_INVERT)
+			priv->flags |= MC13783_PWRB_B2_POL_INVERT;
+
+		if (pdata->b2on_flags & MC13783_BUTTON_RESET_EN)
+			reg |= MC13783_POWER_CONTROL_2_ON2BRSTEN;
+
+		err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD2,
+					  button_irq, "b2on", priv);
+		if (err) {
+			dev_dbg(&pdev->dev, "Can't request irq\n");
+			goto free_irq_b1;
+		}
+	}
+
+	if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) {
+		priv->keymap[2] = pdata->b3on_key;
+		if (pdata->b3on_key != KEY_RESERVED)
+			__set_bit(pdata->b3on_key, pwr->keybit);
+
+		if (pdata->b3on_flags & MC13783_BUTTON_POL_INVERT)
+			priv->flags |= MC13783_PWRB_B3_POL_INVERT;
+
+		if (pdata->b3on_flags & MC13783_BUTTON_RESET_EN)
+			reg |= MC13783_POWER_CONTROL_2_ON3BRSTEN;
+
+		err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD3,
+					  button_irq, "b3on", priv);
+		if (err) {
+			dev_dbg(&pdev->dev, "Can't request irq: %d\n", err);
+			goto free_irq_b2;
+		}
+	}
+
+	mc13xxx_reg_rmw(mc13783, MC13783_REG_POWER_CONTROL_2, 0x3FE, reg);
+
+	mc13xxx_unlock(mc13783);
+
+	pwr->name = "mc13783_pwrbutton";
+	pwr->phys = "mc13783_pwrbutton/input0";
+	pwr->dev.parent = &pdev->dev;
+
+	pwr->keycode = priv->keymap;
+	pwr->keycodemax = ARRAY_SIZE(priv->keymap);
+	pwr->keycodesize = sizeof(priv->keymap[0]);
+	__set_bit(EV_KEY, pwr->evbit);
+
+	err = input_register_device(pwr);
+	if (err) {
+		dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+		goto free_irq;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+free_irq:
+	mc13xxx_lock(mc13783);
+
+	if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD3, priv);
+
+free_irq_b2:
+	if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD2, priv);
+
+free_irq_b1:
+	if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD1, priv);
+
+free_priv:
+	mc13xxx_unlock(mc13783);
+	kfree(priv);
+
+free_input_dev:
+	input_free_device(pwr);
+
+	return err;
+}
+
+static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev)
+{
+	struct mc13783_pwrb *priv = platform_get_drvdata(pdev);
+	const struct mc13xxx_buttons_platform_data *pdata;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	mc13xxx_lock(priv->mc13783);
+
+	if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD3, priv);
+	if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD2, priv);
+	if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+		mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD1, priv);
+
+	mc13xxx_unlock(priv->mc13783);
+
+	input_unregister_device(priv->pwr);
+	kfree(priv);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+struct platform_driver mc13783_pwrbutton_driver = {
+	.probe		= mc13783_pwrbutton_probe,
+	.remove		= __devexit_p(mc13783_pwrbutton_remove),
+	.driver		= {
+		.name	= "mc13783-pwrbutton",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init mc13783_pwrbutton_init(void)
+{
+	return platform_driver_register(&mc13783_pwrbutton_driver);
+}
+module_init(mc13783_pwrbutton_init);
+
+static void __exit mc13783_pwrbutton_exit(void)
+{
+	platform_driver_unregister(&mc13783_pwrbutton_driver);
+}
+module_exit(mc13783_pwrbutton_exit);
+
+MODULE_ALIAS("platform:mc13783-pwrbutton");
+MODULE_DESCRIPTION("MC13783 Power Button");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Philippe Retornaz");
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 09b93b1..e2a9867 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1210,18 +1210,28 @@
  */
 static int elantech_set_properties(struct elantech_data *etd)
 {
+	/* This represents the version of IC body. */
 	int ver = (etd->fw_version & 0x0f0000) >> 16;
 
+	/* Early version of Elan touchpads doesn't obey the rule. */
 	if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
 		etd->hw_version = 1;
-	else if (etd->fw_version < 0x150600)
-		etd->hw_version = 2;
-	else if (ver == 5)
-		etd->hw_version = 3;
-	else if (ver == 6)
-		etd->hw_version = 4;
-	else
-		return -1;
+	else {
+		switch (ver) {
+		case 2:
+		case 4:
+			etd->hw_version = 2;
+			break;
+		case 5:
+			etd->hw_version = 3;
+			break;
+		case 6:
+			etd->hw_version = 4;
+			break;
+		default:
+			return -1;
+		}
+	}
 
 	/*
 	 * Turn on packet checking by default.
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 4b2a42f..d4d08bd 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/serio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/mach-types.h>
 #include <plat/board-ams-delta.h>
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index bb9f5d3..b4cfc6c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -431,6 +431,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
 		},
 	},
+	{
+		/* Newer HP Pavilion dv4 models */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+		},
+	},
 	{ }
 };
 
@@ -560,6 +567,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
 		},
 	},
+	{
+		/* Newer HP Pavilion dv4 models */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index fdb6a39..75fb040 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -15,6 +15,7 @@
 
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 714d4e0..400131d 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -45,6 +45,7 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ad7877.h>
+#include <linux/module.h>
 #include <asm/irq.h>
 
 #define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index ddf732f..b1643c8 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -9,6 +9,7 @@
 #include <linux/input.h>	/* BUS_SPI */
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #include "ad7879.h"
 
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 131f9d1c..3b2e9ed 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -33,6 +33,7 @@
 #include <linux/gpio.h>
 
 #include <linux/spi/ad7879.h>
+#include <linux/module.h>
 #include "ad7879.h"
 
 #define AD7879_REG_ZEROS		0
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index d507b9b..de31ec6 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -31,6 +31,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 #include <asm/irq.h>
 
 /*
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 1507ce1..902c721 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -13,6 +13,7 @@
 #include <linux/input/bu21013.h>
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #define PEN_DOWN_INTR	0
 #define MAX_FINGERS	2
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index c5bc62d..ede0274 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -35,7 +35,7 @@
 
 struct mc13783_ts_priv {
 	struct input_dev *idev;
-	struct mc13783 *mc13783;
+	struct mc13xxx *mc13xxx;
 	struct delayed_work work;
 	struct workqueue_struct *workq;
 	unsigned int sample[4];
@@ -45,7 +45,7 @@
 {
 	struct mc13783_ts_priv *priv = data;
 
-	mc13783_irq_ack(priv->mc13783, irq);
+	mc13xxx_irq_ack(priv->mc13xxx, irq);
 
 	/*
 	 * Kick off reading coordinates. Note that if work happens already
@@ -121,10 +121,10 @@
 {
 	struct mc13783_ts_priv *priv =
 		container_of(work, struct mc13783_ts_priv, work.work);
-	unsigned int mode = MC13783_ADC_MODE_TS;
+	unsigned int mode = MC13XXX_ADC_MODE_TS;
 	unsigned int channel = 12;
 
-	if (mc13783_adc_do_conversion(priv->mc13783,
+	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
 				mode, channel, priv->sample) == 0)
 		mc13783_ts_report_sample(priv);
 }
@@ -134,21 +134,21 @@
 	struct mc13783_ts_priv *priv = input_get_drvdata(dev);
 	int ret;
 
-	mc13783_lock(priv->mc13783);
+	mc13xxx_lock(priv->mc13xxx);
 
-	mc13783_irq_ack(priv->mc13783, MC13783_IRQ_TS);
+	mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
 
-	ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS,
+	ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
 		mc13783_ts_handler, MC13783_TS_NAME, priv);
 	if (ret)
 		goto out;
 
-	ret = mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
-			MC13783_ADC0_TSMOD_MASK, MC13783_ADC0_TSMOD0);
+	ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+			MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
 	if (ret)
-		mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
+		mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
 out:
-	mc13783_unlock(priv->mc13783);
+	mc13xxx_unlock(priv->mc13xxx);
 	return ret;
 }
 
@@ -156,11 +156,11 @@
 {
 	struct mc13783_ts_priv *priv = input_get_drvdata(dev);
 
-	mc13783_lock(priv->mc13783);
-	mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
-			MC13783_ADC0_TSMOD_MASK, 0);
-	mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
-	mc13783_unlock(priv->mc13783);
+	mc13xxx_lock(priv->mc13xxx);
+	mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+			MC13XXX_ADC0_TSMOD_MASK, 0);
+	mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+	mc13xxx_unlock(priv->mc13xxx);
 
 	cancel_delayed_work_sync(&priv->work);
 }
@@ -177,7 +177,7 @@
 		goto err_free_mem;
 
 	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
-	priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
 	priv->idev = idev;
 
 	/*
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index bb161d2..c0c7820 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/bitmap.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c
index 9c192e7..288da5c 100644
--- a/drivers/iommu/omap-iommu-debug.c
+++ b/drivers/iommu/omap-iommu-debug.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c
index e8fdb88..46be456 100644
--- a/drivers/iommu/omap-iovmm.c
+++ b/drivers/iommu/omap-iovmm.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/isdn/capi/kcapi_proc.c b/drivers/isdn/capi/kcapi_proc.c
index ea2dff6..8d51cd1 100644
--- a/drivers/isdn/capi/kcapi_proc.c
+++ b/drivers/isdn/capi/kcapi_proc.c
@@ -14,6 +14,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/export.h>
 
 static char *state2str(unsigned short state)
 {
diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c
index 33ec9e4..9021182 100644
--- a/drivers/isdn/divert/divert_procfs.c
+++ b/drivers/isdn/divert/divert_procfs.c
@@ -242,6 +242,12 @@
 		case IIOCDOCFINT:
 			if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid))
 				return (-EINVAL);	/* invalid driver */
+			if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) ==
+					sizeof(dioctl.cf_ctrl.msn))
+				return -EINVAL;
+			if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) ==
+					sizeof(dioctl.cf_ctrl.fwd_nr))
+				return -EINVAL;
 			if ((i = cf_command(dioctl.cf_ctrl.drvid,
 					    (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2,
 					    dioctl.cf_ctrl.cfproc,
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index c3b1dc3..fddae72 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -16,6 +16,7 @@
 #include "gigaset.h"
 #include <linux/crc-ccitt.h>
 #include <linux/bitrev.h>
+#include <linux/export.h>
 
 /* check if byte must be stuffed/escaped
  * I'm not sure which data should be encoded.
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 658e75f..6d5ceee 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -17,6 +17,7 @@
 #include <linux/isdn/capilli.h>
 #include <linux/isdn/capicmd.h>
 #include <linux/isdn/capiutil.h>
+#include <linux/export.h>
 
 /* missing from kernelcapi.h */
 #define CapiNcpiNotSupportedByProtocol	0x0001
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
index bd0b1ea..19b1c77 100644
--- a/drivers/isdn/gigaset/dummyll.c
+++ b/drivers/isdn/gigaset/dummyll.c
@@ -11,6 +11,7 @@
  * =====================================================================
  */
 
+#include <linux/export.h>
 #include "gigaset.h"
 
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ba74646..6d12623 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -13,6 +13,7 @@
  * =====================================================================
  */
 
+#include <linux/export.h>
 #include "gigaset.h"
 
 /* ========================================================== */
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 9bec8b9..04231cb 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -15,6 +15,7 @@
 
 #include "gigaset.h"
 #include <linux/isdnif.h>
+#include <linux/export.h>
 
 #define SBUFSIZE	4096	/* sk_buff payload size */
 #define TRANSBUFSIZE	768	/* bytes per skb for transparent receive */
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index e35058b..ee0a549 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -14,6 +14,7 @@
 #include "gigaset.h"
 #include <linux/gigaset_dev.h>
 #include <linux/tty_flip.h>
+#include <linux/module.h>
 
 /*** our ioctls ***/
 
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index d13fa5b..7034af2 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/mISDNhw.h>
+#include <linux/module.h>
 #include "isar.h"
 
 #define ISAR_REV	"2.1"
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index b0d9ab1..6a8acf6 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -353,7 +353,7 @@
 			         { l3dss1_dummy_invoke(st, cr, id, ident, p, nlen);
                                    return;
                                  } 
-#ifdef HISAX_DE_AOC
+#ifdef CONFIG_DE_AOC
 			{
 
 #define FOO1(s,a,b) \
@@ -422,9 +422,9 @@
 #undef FOO1
 
 			}
-#else  /* not HISAX_DE_AOC */
+#else  /* not CONFIG_DE_AOC */
                         l3_debug(st, "invoke break");
-#endif /* not HISAX_DE_AOC */
+#endif /* not CONFIG_DE_AOC */
 			break;
 		case 2:	/* return result */
 			 /* if no process available handle separately */ 
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 1f73d7f..2339d73 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -2756,6 +2756,9 @@
 			char *c,
 			*e;
 
+			if (strnlen(cfg->drvid, sizeof(cfg->drvid)) ==
+					sizeof(cfg->drvid))
+				return -EINVAL;
 			drvidx = -1;
 			chidx = -1;
 			strcpy(drvid, cfg->drvid);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index e5546cb..2c26b64 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -750,6 +750,7 @@
  * supplementary service (CAPI 2.0 part III)
  */
 #include <linux/isdn/capicmd.h>
+#include <linux/module.h>
 
 int
 isdn_tty_capi_facility(capi_msg *cm) {
diff --git a/drivers/isdn/mISDN/clock.c b/drivers/isdn/mISDN/clock.c
index 1fa629b..7418f2d 100644
--- a/drivers/isdn/mISDN/clock.c
+++ b/drivers/isdn/mISDN/clock.c
@@ -38,6 +38,7 @@
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <linux/mISDNif.h>
+#include <linux/export.h>
 #include "core.h"
 
 static u_int *debug;
diff --git a/drivers/isdn/mISDN/dsp_audio.c b/drivers/isdn/mISDN/dsp_audio.c
index 9c7c645..b8f18bd0 100644
--- a/drivers/isdn/mISDN/dsp_audio.c
+++ b/drivers/isdn/mISDN/dsp_audio.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/mISDNif.h>
 #include <linux/mISDNdsp.h>
+#include <linux/export.h>
 #include "core.h"
 #include "dsp.h"
 
diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index 621f310..b6c9a58 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -30,6 +30,7 @@
 #include <linux/string.h>
 #include <linux/mISDNif.h>
 #include <linux/mISDNdsp.h>
+#include <linux/export.h>
 #include "dsp.h"
 #include "dsp_hwec.h"
 
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 8e32522..738ea8d 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -17,6 +17,7 @@
 
 #include <linux/mISDNif.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "core.h"
 
 static u_int	*debug;
diff --git a/drivers/leds/dell-led.c b/drivers/leds/dell-led.c
index 5259029..e5c5738 100644
--- a/drivers/leds/dell-led.c
+++ b/drivers/leds/dell-led.c
@@ -14,6 +14,7 @@
 #include <linux/acpi.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Louis Davis/Jim Dailey");
 MODULE_DESCRIPTION("Dell LED Control Driver");
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 661b692..6d5628b 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -270,11 +270,8 @@
 	del_timer_sync(&led_cdev->blink_timer);
 
 	if (led_cdev->blink_set &&
-	    !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
-		led_cdev->blink_delay_on = *delay_on;
-		led_cdev->blink_delay_off = *delay_off;
+	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
 		return;
-	}
 
 	/* blink with 1 Hz as default if nothing specified */
 	if (!*delay_on && !*delay_off)
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 0d4c166..0810604 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
 
 #define LED_PWM_SHIFT		(3)
 #define LED_PWM_MASK		(0x1F)
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 22f847c..48d9fe6 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -14,6 +14,7 @@
 
 #include <linux/mfd/asic3.h>
 #include <linux/mfd/core.h>
+#include <linux/module.h>
 
 /*
  *	The HTC ASIC3 LED GPIOs are inputs, not outputs.
@@ -107,9 +108,10 @@
 	}
 
 	led->cdev->name = led->name;
-	led->cdev->default_trigger = led->default_trigger;
+	led->cdev->flags = LED_CORE_SUSPENDRESUME;
 	led->cdev->brightness_set = brightness_set;
 	led->cdev->blink_set = blink_set;
+	led->cdev->default_trigger = led->default_trigger;
 
 	ret = led_classdev_register(&pdev->dev, led->cdev);
 	if (ret < 0)
@@ -136,12 +138,44 @@
 	return mfd_cell_disable(pdev);
 }
 
+static int asic3_led_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret;
+
+	ret = 0;
+	if (cell->suspend)
+		ret = (*cell->suspend)(pdev);
+
+	return ret;
+}
+
+static int asic3_led_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	int ret;
+
+	ret = 0;
+	if (cell->resume)
+		ret = (*cell->resume)(pdev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops asic3_led_pm_ops = {
+	.suspend	= asic3_led_suspend,
+	.resume		= asic3_led_resume,
+};
+
 static struct platform_driver asic3_led_driver = {
 	.probe		= asic3_led_probe,
 	.remove		= __devexit_p(asic3_led_remove),
 	.driver		= {
 		.name	= "leds-asic3",
 		.owner	= THIS_MODULE,
+		.pm	= &asic3_led_pm_ops,
 	},
 };
 
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index c941d906..109c875 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -4,6 +4,7 @@
 #include <linux/io.h>
 #include <linux/atmel_pwm.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 
 struct pwmled {
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 438d483..aac1c07 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <linux/export.h>
 
 #define LED_WEB		0x04
 #define LED_POWER_OFF	0x08
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index d11d05b..49aceff 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/module.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
 
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 504cc26..399a86f 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -18,6 +18,7 @@
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 
 #include <asm/gpio.h>
 
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 4dc510f..0630e4f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -18,6 +18,7 @@
 #include <linux/led-lm3530.h>
 #include <linux/types.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #define LM3530_LED_DEV "lcd-backlight"
 #define LM3530_NAME "lm3530-led"
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 1f7c10f..80ba048 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/leds.h>
 
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index 2579678..53f67b8 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct lt3593_led_data {
 	struct led_classdev cdev;
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index f369e56..b3393a9 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -21,13 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/workqueue.h>
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
 #include <linux/slab.h>
 
 struct mc13783_led {
 	struct led_classdev	cdev;
 	struct work_struct	work;
-	struct mc13783		*master;
+	struct mc13xxx		*master;
 	enum led_brightness	new_brightness;
 	int			id;
 };
@@ -111,11 +111,11 @@
 		break;
 	}
 
-	mc13783_lock(led->master);
+	mc13xxx_lock(led->master);
 
-	mc13783_reg_rmw(led->master, reg, mask, value);
+	mc13xxx_reg_rmw(led->master, reg, mask, value);
 
-	mc13783_unlock(led->master);
+	mc13xxx_unlock(led->master);
 }
 
 static void mc13783_led_set(struct led_classdev *led_cdev,
@@ -172,23 +172,23 @@
 		break;
 	}
 
-	mc13783_lock(led->master);
+	mc13xxx_lock(led->master);
 
-	ret = mc13783_reg_rmw(led->master, reg, mask << shift,
+	ret = mc13xxx_reg_rmw(led->master, reg, mask << shift,
 						value << shift);
 
-	mc13783_unlock(led->master);
+	mc13xxx_unlock(led->master);
 	return ret;
 }
 
 static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
 	int ret = 0;
 	int reg = 0;
 
-	mc13783_lock(dev);
+	mc13xxx_lock(dev);
 
 	if (pdata->flags & MC13783_LED_TC1HALF)
 		reg |= MC13783_LED_C1_TC1HALF_BIT;
@@ -196,7 +196,7 @@
 	if (pdata->flags & MC13783_LED_SLEWLIMTC)
 		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
 	if (ret)
 		goto out;
 
@@ -206,7 +206,7 @@
 	if (pdata->flags & MC13783_LED_SLEWLIMBL)
 		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
 	if (ret)
 		goto out;
 
@@ -216,7 +216,7 @@
 	if (pdata->flags & MC13783_LED_TRIODE_TC1)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
 	if (ret)
 		goto out;
 
@@ -226,7 +226,7 @@
 	if (pdata->flags & MC13783_LED_TRIODE_TC2)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
 	if (ret)
 		goto out;
 
@@ -236,7 +236,7 @@
 	if (pdata->flags & MC13783_LED_TRIODE_TC3)
 		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
 	if (ret)
 		goto out;
 
@@ -255,17 +255,17 @@
 	reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
 							MC13783_LED_C0_ABREF;
 
-	ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
+	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
 
 out:
-	mc13783_unlock(dev);
+	mc13xxx_unlock(dev);
 	return ret;
 }
 
 static int __devinit mc13783_led_probe(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13783_led_platform_data *led_cur;
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx_led_platform_data *led_cur;
 	struct mc13783_led *led, *led_dat;
 	int ret, i;
 	int init_led = 0;
@@ -351,9 +351,9 @@
 
 static int __devexit mc13783_led_remove(struct platform_device *pdev)
 {
-	struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct mc13783_led *led = platform_get_drvdata(pdev);
-	struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
 	int i;
 
 	for (i = 0; i < pdata->num_leds; i++) {
@@ -361,16 +361,16 @@
 		cancel_work_sync(&led[i].work);
 	}
 
-	mc13783_lock(dev);
+	mc13xxx_lock(dev);
 
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
-	mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
+	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
 
-	mc13783_unlock(dev);
+	mc13xxx_unlock(dev);
 
 	kfree(led);
 	return 0;
diff --git a/drivers/leds/leds-net48xx.c b/drivers/leds/leds-net48xx.c
index 93987a1..f117f73 100644
--- a/drivers/leds/leds-net48xx.c
+++ b/drivers/leds/leds-net48xx.c
@@ -18,6 +18,7 @@
 #include <asm/io.h>
 #include <linux/nsc_gpio.h>
 #include <linux/scx200_gpio.h>
+#include <linux/module.h>
 
 #define DRVNAME "net48xx-led"
 #define NET48XX_ERROR_LED_GPIO	20
diff --git a/drivers/leds/leds-net5501.c b/drivers/leds/leds-net5501.c
index 7e764b8..0555d47 100644
--- a/drivers/leds/leds-net5501.c
+++ b/drivers/leds/leds-net5501.c
@@ -16,6 +16,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <asm/geode.h>
 
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index f77d48d..37b7d0c 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/module.h>
 #include <mach/leds-ns2.h>
 
 /*
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index a77771d..29f8b0f 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index ef5c241..b1eb34c 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -18,6 +18,7 @@
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
 #include <linux/mfd/wm831x/status.h>
+#include <linux/module.h>
 
 
 struct wm831x_status {
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index f14edd8..4a12765 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -17,6 +17,7 @@
 #include <linux/mfd/wm8350/pmic.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 /* Microamps */
 static const int isink_cur[] = {
diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c
index 2982c86..6e21e65 100644
--- a/drivers/leds/leds-wrap.c
+++ b/drivers/leds/leds-wrap.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <asm/io.h>
 #include <linux/scx200_gpio.h>
+#include <linux/module.h>
 
 #define DRVNAME "wrap-led"
 #define WRAP_POWER_LED_GPIO	2
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 5289ffa..0dc30ff 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/virtio_ring.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/paravirt.h>
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index f97e625..ff4a0bc 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -13,6 +13,7 @@
 #include <linux/eventfd.h>
 #include <linux/file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "lg.h"
 
 /*L:056
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 817f37a..c9570fc 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -159,7 +159,7 @@
 	err = macii_init_via();
 	if (err) goto out;
 
-	err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+	err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
 			  macii_interrupt);
 	if (err) goto out;
 
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 9ab5b0c..34d02a9 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -122,8 +122,8 @@
 		return err;
 	}
 
-	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, 
-			"ADB", maciisi_interrupt)) {
+	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+			maciisi_interrupt)) {
 		printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
 		return -EAGAIN;
 	}
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index cb24666..0a6806f 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -14,6 +14,7 @@
 #include <linux/vmalloc.h>
 #include <linux/version.h>
 #include <linux/shrinker.h>
+#include <linux/module.h>
 
 #define DM_MSG_PREFIX "bufio"
 
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 0bdb201..042e719 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -11,6 +11,7 @@
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #define DM_MSG_PREFIX "snapshot exception stores"
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index 8db3862..9429159 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -9,6 +9,7 @@
 #include <linux/dm-dirty-log.h>
 #include <linux/device-mapper.h>
 #include <linux/dm-log-userspace.h>
+#include <linux/module.h>
 
 #include "dm-log-userspace-transfer.h"
 
diff --git a/drivers/md/dm-path-selector.c b/drivers/md/dm-path-selector.c
index 42c04f0..fa0ccc5 100644
--- a/drivers/md/dm-path-selector.c
+++ b/drivers/md/dm-path-selector.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/device-mapper.h>
+#include <linux/module.h>
 
 #include "dm-path-selector.h"
 
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 11fa96d..c2907d8 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "md.h"
 #include "raid1.h"
diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c
index 24752f4..27f1d42 100644
--- a/drivers/md/dm-round-robin.c
+++ b/drivers/md/dm-round-robin.c
@@ -14,6 +14,7 @@
 #include "dm-path-selector.h"
 
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DM_MSG_PREFIX "multipath round-robin"
 
diff --git a/drivers/md/dm-service-time.c b/drivers/md/dm-service-time.c
index 9c6c2e4..59883bd 100644
--- a/drivers/md/dm-service-time.c
+++ b/drivers/md/dm-service-time.c
@@ -12,6 +12,7 @@
 #include "dm-path-selector.h"
 
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DM_MSG_PREFIX	"multipath service-time"
 #define ST_MIN_IO	1
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index d1f1d70..3ac4156 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/dm-io.h>
 
diff --git a/drivers/md/dm-snap-transient.c b/drivers/md/dm-snap-transient.c
index a0898a6..1ce9a25 100644
--- a/drivers/md/dm-snap-transient.c
+++ b/drivers/md/dm-snap-transient.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/dm-io.h>
 
diff --git a/drivers/md/dm-uevent.c b/drivers/md/dm-uevent.c
index 6b1e3b6..8efe033 100644
--- a/drivers/md/dm-uevent.c
+++ b/drivers/md/dm-uevent.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/kobject.h>
 #include <linux/dm-ioctl.h>
+#include <linux/export.h>
 
 #include "dm.h"
 #include "dm-uevent.h"
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 6b6616a..4720f68 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -192,9 +192,6 @@
 	/* forced geometry settings */
 	struct hd_geometry geometry;
 
-	/* For saving the address of __make_request for request based dm */
-	make_request_fn *saved_make_request_fn;
-
 	/* sysfs handle */
 	struct kobject kobj;
 
@@ -1403,7 +1400,7 @@
  * The request function that just remaps the bio built up by
  * dm_merge_bvec.
  */
-static int _dm_request(struct request_queue *q, struct bio *bio)
+static void _dm_request(struct request_queue *q, struct bio *bio)
 {
 	int rw = bio_data_dir(bio);
 	struct mapped_device *md = q->queuedata;
@@ -1424,19 +1421,12 @@
 			queue_io(md, bio);
 		else
 			bio_io_error(bio);
-		return 0;
+		return;
 	}
 
 	__split_and_process_bio(md, bio);
 	up_read(&md->io_lock);
-	return 0;
-}
-
-static int dm_make_request(struct request_queue *q, struct bio *bio)
-{
-	struct mapped_device *md = q->queuedata;
-
-	return md->saved_make_request_fn(q, bio); /* call __make_request() */
+	return;
 }
 
 static int dm_request_based(struct mapped_device *md)
@@ -1444,14 +1434,14 @@
 	return blk_queue_stackable(md->queue);
 }
 
-static int dm_request(struct request_queue *q, struct bio *bio)
+static void dm_request(struct request_queue *q, struct bio *bio)
 {
 	struct mapped_device *md = q->queuedata;
 
 	if (dm_request_based(md))
-		return dm_make_request(q, bio);
-
-	return _dm_request(q, bio);
+		blk_queue_bio(q, bio);
+	else
+		_dm_request(q, bio);
 }
 
 void dm_dispatch_request(struct request *rq)
@@ -2191,7 +2181,6 @@
 		return 0;
 
 	md->queue = q;
-	md->saved_make_request_fn = md->queue->make_request_fn;
 	dm_init_md_queue(md);
 	blk_queue_softirq_done(md->queue, dm_softirq_done);
 	blk_queue_prep_rq(md->queue, dm_prep_fn);
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 60816b1..feb2c3c 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -63,6 +63,7 @@
 
 #define MaxFault	50
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/raid/md_u.h>
 #include <linux/slab.h>
 #include "md.h"
@@ -169,7 +170,7 @@
 		conf->nfaults = n+1;
 }
 
-static int make_request(struct mddev *mddev, struct bio *bio)
+static void make_request(struct mddev *mddev, struct bio *bio)
 {
 	struct faulty_conf *conf = mddev->private;
 	int failit = 0;
@@ -181,7 +182,7 @@
 			 * just fail immediately
 			 */
 			bio_endio(bio, -EIO);
-			return 0;
+			return;
 		}
 
 		if (check_sector(conf, bio->bi_sector, bio->bi_sector+(bio->bi_size>>9),
@@ -211,15 +212,15 @@
 	}
 	if (failit) {
 		struct bio *b = bio_clone_mddev(bio, GFP_NOIO, mddev);
+
 		b->bi_bdev = conf->rdev->bdev;
 		b->bi_private = bio;
 		b->bi_end_io = faulty_fail;
-		generic_make_request(b);
-		return 0;
-	} else {
+		bio = b;
+	} else
 		bio->bi_bdev = conf->rdev->bdev;
-		return 1;
-	}
+
+	generic_make_request(bio);
 }
 
 static void status(struct seq_file *seq, struct mddev *mddev)
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 10c5844..c3273ef 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -19,6 +19,7 @@
 #include <linux/blkdev.h>
 #include <linux/raid/md_u.h>
 #include <linux/seq_file.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include "md.h"
 #include "linear.h"
@@ -264,14 +265,14 @@
 	return 0;
 }
 
-static int linear_make_request (struct mddev *mddev, struct bio *bio)
+static void linear_make_request(struct mddev *mddev, struct bio *bio)
 {
 	struct dev_info *tmp_dev;
 	sector_t start_sector;
 
 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bio);
-		return 0;
+		return;
 	}
 
 	rcu_read_lock();
@@ -293,7 +294,7 @@
 		       (unsigned long long)start_sector);
 		rcu_read_unlock();
 		bio_io_error(bio);
-		return 0;
+		return;
 	}
 	if (unlikely(bio->bi_sector + (bio->bi_size >> 9) >
 		     tmp_dev->end_sector)) {
@@ -307,20 +308,17 @@
 
 		bp = bio_split(bio, end_sector - bio->bi_sector);
 
-		if (linear_make_request(mddev, &bp->bio1))
-			generic_make_request(&bp->bio1);
-		if (linear_make_request(mddev, &bp->bio2))
-			generic_make_request(&bp->bio2);
+		linear_make_request(mddev, &bp->bio1);
+		linear_make_request(mddev, &bp->bio2);
 		bio_pair_release(bp);
-		return 0;
+		return;
 	}
 		    
 	bio->bi_bdev = tmp_dev->rdev->bdev;
 	bio->bi_sector = bio->bi_sector - start_sector
 		+ tmp_dev->rdev->data_offset;
 	rcu_read_unlock();
-
-	return 1;
+	generic_make_request(bio);
 }
 
 static void linear_status (struct seq_file *seq, struct mddev *mddev)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 266e82e..84acfe7 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -44,6 +44,7 @@
 #include <linux/hdreg.h>
 #include <linux/proc_fs.h>
 #include <linux/random.h>
+#include <linux/module.h>
 #include <linux/reboot.h>
 #include <linux/file.h>
 #include <linux/compat.h>
@@ -332,18 +333,17 @@
  * call has finished, the bio has been linked into some internal structure
  * and so is visible to ->quiesce(), so we don't need the refcount any more.
  */
-static int md_make_request(struct request_queue *q, struct bio *bio)
+static void md_make_request(struct request_queue *q, struct bio *bio)
 {
 	const int rw = bio_data_dir(bio);
 	struct mddev *mddev = q->queuedata;
-	int rv;
 	int cpu;
 	unsigned int sectors;
 
 	if (mddev == NULL || mddev->pers == NULL
 	    || !mddev->ready) {
 		bio_io_error(bio);
-		return 0;
+		return;
 	}
 	smp_rmb(); /* Ensure implications of  'active' are visible */
 	rcu_read_lock();
@@ -368,7 +368,7 @@
 	 * go away inside make_request
 	 */
 	sectors = bio_sectors(bio);
-	rv = mddev->pers->make_request(mddev, bio);
+	mddev->pers->make_request(mddev, bio);
 
 	cpu = part_stat_lock();
 	part_stat_inc(cpu, &mddev->gendisk->part0, ios[rw]);
@@ -377,8 +377,6 @@
 
 	if (atomic_dec_and_test(&mddev->active_io) && mddev->suspended)
 		wake_up(&mddev->sb_wait);
-
-	return rv;
 }
 
 /* mddev_suspend makes sure no new requests are submitted
@@ -477,8 +475,7 @@
 		bio_endio(bio, 0);
 	else {
 		bio->bi_rw &= ~REQ_FLUSH;
-		if (mddev->pers->make_request(mddev, bio))
-			generic_make_request(bio);
+		mddev->pers->make_request(mddev, bio);
 	}
 
 	mddev->flush_bio = NULL;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 51c1d91..cf742d9 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -419,7 +419,7 @@
 	int level;
 	struct list_head list;
 	struct module *owner;
-	int (*make_request)(struct mddev *mddev, struct bio *bio);
+	void (*make_request)(struct mddev *mddev, struct bio *bio);
 	int (*run)(struct mddev *mddev);
 	int (*stop)(struct mddev *mddev);
 	void (*status)(struct seq_file *seq, struct mddev *mddev);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index d32c785..5899246 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/raid/md_u.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -106,7 +107,7 @@
 	rdev_dec_pending(rdev, conf->mddev);
 }
 
-static int multipath_make_request(struct mddev *mddev, struct bio * bio)
+static void multipath_make_request(struct mddev *mddev, struct bio * bio)
 {
 	struct mpconf *conf = mddev->private;
 	struct multipath_bh * mp_bh;
@@ -114,7 +115,7 @@
 
 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bio);
-		return 0;
+		return;
 	}
 
 	mp_bh = mempool_alloc(conf->pool, GFP_NOIO);
@@ -126,7 +127,7 @@
 	if (mp_bh->path < 0) {
 		bio_endio(bio, -EIO);
 		mempool_free(mp_bh, conf->pool);
-		return 0;
+		return;
 	}
 	multipath = conf->multipaths + mp_bh->path;
 
@@ -137,7 +138,7 @@
 	mp_bh->bio.bi_end_io = multipath_end_request;
 	mp_bh->bio.bi_private = mp_bh;
 	generic_make_request(&mp_bh->bio);
-	return 0;
+	return;
 }
 
 static void multipath_status (struct seq_file *seq, struct mddev *mddev)
diff --git a/drivers/md/persistent-data/dm-btree-remove.c b/drivers/md/persistent-data/dm-btree-remove.c
index 65fd85e..023fbc2 100644
--- a/drivers/md/persistent-data/dm-btree-remove.c
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -8,7 +8,7 @@
 #include "dm-btree-internal.h"
 #include "dm-transaction-manager.h"
 
-#include <linux/module.h>
+#include <linux/export.h>
 
 /*
  * Removing an entry from a btree
diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
index e0638be..bd1e7ff 100644
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -8,7 +8,7 @@
 #include "dm-space-map.h"
 #include "dm-transaction-manager.h"
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/device-mapper.h>
 
 #define DM_MSG_PREFIX "btree"
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
index bb44a93..50ed53b 100644
--- a/drivers/md/persistent-data/dm-space-map-checker.c
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -7,6 +7,7 @@
 #include "dm-space-map-checker.h"
 
 #include <linux/device-mapper.h>
+#include <linux/export.h>
 
 #ifdef CONFIG_DM_DEBUG_SPACE_MAPS
 
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
index aeff785..fc469ba 100644
--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -12,7 +12,7 @@
 
 #include <linux/list.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/device-mapper.h>
 
 #define DM_MSG_PREFIX "space map disk"
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
index 728e89a..6f8d387 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.c
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -10,7 +10,7 @@
 #include "dm-space-map-metadata.h"
 #include "dm-persistent-data-internal.h"
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/device-mapper.h>
 
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 0eb08a4..7294bd1 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -20,6 +20,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include "md.h"
 #include "raid0.h"
@@ -468,7 +469,7 @@
 	}
 }
 
-static int raid0_make_request(struct mddev *mddev, struct bio *bio)
+static void raid0_make_request(struct mddev *mddev, struct bio *bio)
 {
 	unsigned int chunk_sects;
 	sector_t sector_offset;
@@ -477,7 +478,7 @@
 
 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bio);
-		return 0;
+		return;
 	}
 
 	chunk_sects = mddev->chunk_sectors;
@@ -497,13 +498,10 @@
 		else
 			bp = bio_split(bio, chunk_sects -
 				       sector_div(sector, chunk_sects));
-		if (raid0_make_request(mddev, &bp->bio1))
-			generic_make_request(&bp->bio1);
-		if (raid0_make_request(mddev, &bp->bio2))
-			generic_make_request(&bp->bio2);
-
+		raid0_make_request(mddev, &bp->bio1);
+		raid0_make_request(mddev, &bp->bio2);
 		bio_pair_release(bp);
-		return 0;
+		return;
 	}
 
 	sector_offset = bio->bi_sector;
@@ -513,10 +511,9 @@
 	bio->bi_bdev = tmp_dev->bdev;
 	bio->bi_sector = sector_offset + zone->dev_start +
 		tmp_dev->data_offset;
-	/*
-	 * Let the main block layer submit the IO and resolve recursion:
-	 */
-	return 1;
+
+	generic_make_request(bio);
+	return;
 
 bad_map:
 	printk("md/raid0:%s: make_request bug: can't convert block across chunks"
@@ -525,7 +522,7 @@
 	       (unsigned long long)bio->bi_sector, bio->bi_size >> 10);
 
 	bio_io_error(bio);
-	return 0;
+	return;
 }
 
 static void raid0_status(struct seq_file *seq, struct mddev *mddev)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 4602fc5..ede2461 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/ratelimit.h>
 #include "md.h"
@@ -807,7 +808,7 @@
 	pr_debug("%dB behind alloc failed, doing sync I/O\n", bio->bi_size);
 }
 
-static int make_request(struct mddev *mddev, struct bio * bio)
+static void make_request(struct mddev *mddev, struct bio * bio)
 {
 	struct r1conf *conf = mddev->private;
 	struct mirror_info *mirror;
@@ -892,7 +893,7 @@
 		if (rdisk < 0) {
 			/* couldn't find anywhere to read from */
 			raid_end_bio_io(r1_bio);
-			return 0;
+			return;
 		}
 		mirror = conf->mirrors + rdisk;
 
@@ -950,7 +951,7 @@
 			goto read_again;
 		} else
 			generic_make_request(read_bio);
-		return 0;
+		return;
 	}
 
 	/*
@@ -1151,8 +1152,6 @@
 
 	if (do_sync || !bitmap || !plugged)
 		md_wakeup_thread(mddev->thread);
-
-	return 0;
 }
 
 static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2193,7 +2192,6 @@
 		bio->bi_next = NULL;
 		bio->bi_flags &= ~(BIO_POOL_MASK-1);
 		bio->bi_flags |= 1 << BIO_UPTODATE;
-		bio->bi_comp_cpu = -1;
 		bio->bi_rw = READ;
 		bio->bi_vcnt = 0;
 		bio->bi_idx = 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index c025a82..685ddf3 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/ratelimit.h>
 #include "md.h"
@@ -842,7 +843,7 @@
 	spin_unlock_irq(&conf->resync_lock);
 }
 
-static int make_request(struct mddev *mddev, struct bio * bio)
+static void make_request(struct mddev *mddev, struct bio * bio)
 {
 	struct r10conf *conf = mddev->private;
 	struct mirror_info *mirror;
@@ -861,7 +862,7 @@
 
 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bio);
-		return 0;
+		return;
 	}
 
 	/* If this request crosses a chunk boundary, we need to
@@ -893,10 +894,8 @@
 		conf->nr_waiting++;
 		spin_unlock_irq(&conf->resync_lock);
 
-		if (make_request(mddev, &bp->bio1))
-			generic_make_request(&bp->bio1);
-		if (make_request(mddev, &bp->bio2))
-			generic_make_request(&bp->bio2);
+		make_request(mddev, &bp->bio1);
+		make_request(mddev, &bp->bio2);
 
 		spin_lock_irq(&conf->resync_lock);
 		conf->nr_waiting--;
@@ -904,14 +903,14 @@
 		spin_unlock_irq(&conf->resync_lock);
 
 		bio_pair_release(bp);
-		return 0;
+		return;
 	bad_map:
 		printk("md/raid10:%s: make_request bug: can't convert block across chunks"
 		       " or bigger than %dk %llu %d\n", mdname(mddev), chunk_sects/2,
 		       (unsigned long long)bio->bi_sector, bio->bi_size >> 10);
 
 		bio_io_error(bio);
-		return 0;
+		return;
 	}
 
 	md_write_start(mddev, bio);
@@ -954,7 +953,7 @@
 		slot = r10_bio->read_slot;
 		if (disk < 0) {
 			raid_end_bio_io(r10_bio);
-			return 0;
+			return;
 		}
 		mirror = conf->mirrors + disk;
 
@@ -1002,7 +1001,7 @@
 			goto read_again;
 		} else
 			generic_make_request(read_bio);
-		return 0;
+		return;
 	}
 
 	/*
@@ -1176,7 +1175,6 @@
 
 	if (do_sync || !mddev->bitmap || !plugged)
 		md_wakeup_thread(mddev->thread);
-	return 0;
 }
 
 static void status(struct seq_file *seq, struct mddev *mddev)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f6fe053..297e260 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -47,6 +47,7 @@
 #include <linux/kthread.h>
 #include <linux/raid/pq.h>
 #include <linux/async_tx.h>
+#include <linux/module.h>
 #include <linux/async.h>
 #include <linux/seq_file.h>
 #include <linux/cpu.h>
@@ -3109,7 +3110,7 @@
 	struct r5dev *pdev, *qdev;
 
 	clear_bit(STRIPE_HANDLE, &sh->state);
-	if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
+	if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
 		/* already being handled, ensure it gets handled
 		 * again when current action finishes */
 		set_bit(STRIPE_HANDLE, &sh->state);
@@ -3158,10 +3159,14 @@
 	/* check if the array has lost more than max_degraded devices and,
 	 * if so, some requests might need to be failed.
 	 */
-	if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
-	if (s.failed > conf->max_degraded && s.syncing)
-		handle_failed_sync(conf, sh, &s);
+	if (s.failed > conf->max_degraded) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
+		if (s.syncing)
+			handle_failed_sync(conf, sh, &s);
+	}
 
 	/*
 	 * might be able to return some write requests if the parity blocks
@@ -3370,7 +3375,7 @@
 
 	return_io(s.return_bi);
 
-	clear_bit(STRIPE_ACTIVE, &sh->state);
+	clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
 }
 
 static void raid5_activate_delayed(struct r5conf *conf)
@@ -3688,7 +3693,7 @@
 	return sh;
 }
 
-static int make_request(struct mddev *mddev, struct bio * bi)
+static void make_request(struct mddev *mddev, struct bio * bi)
 {
 	struct r5conf *conf = mddev->private;
 	int dd_idx;
@@ -3701,7 +3706,7 @@
 
 	if (unlikely(bi->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bi);
-		return 0;
+		return;
 	}
 
 	md_write_start(mddev, bi);
@@ -3709,7 +3714,7 @@
 	if (rw == READ &&
 	     mddev->reshape_position == MaxSector &&
 	     chunk_aligned_read(mddev,bi))
-		return 0;
+		return;
 
 	logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
 	last_sector = bi->bi_sector + (bi->bi_size>>9);
@@ -3844,8 +3849,6 @@
 
 		bio_endio(bi, 0);
 	}
-
-	return 0;
 }
 
 static sector_t raid5_size(struct mddev *mddev, sector_t sectors, int raid_disks);
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index f5d53a2..d6b1cf6 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -21,6 +21,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <media/saa7146.h>
+#include <linux/module.h>
 
 LIST_HEAD(saa7146_devices);
 DEFINE_MUTEX(saa7146_devices_lock);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index a925461..71f8e01 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -1,6 +1,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <media/saa7146_vv.h>
+#include <linux/module.h>
 
 /****************************************************************************/
 /* resource management functions, shamelessly stolen from saa7134 driver */
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index 79ad73a..bc1f545 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -1,6 +1,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <media/saa7146_vv.h>
 
 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 384b358..ce30533 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -2,6 +2,7 @@
 
 #include <media/saa7146_vv.h>
 #include <media/v4l2-chip-ident.h>
+#include <linux/module.h>
 
 static int max_memory = 32;
 
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index 94a603a..e13683b 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <media/tuner.h>
 #include <media/tuner-types.h>
 
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
index cf7214e..38019ba 100644
--- a/drivers/media/dvb/ddbridge/Makefile
+++ b/drivers/media/dvb/ddbridge/Makefile
@@ -11,4 +11,4 @@
 ccflags-y += -Idrivers/media/common/tuners/
 
 # For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 7d0710b..26c8b9e 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -102,6 +102,7 @@
 
 dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
 obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
 obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
 
 ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2ad33ba..2d08c9b 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -37,6 +37,7 @@
 #define USB_VID_HAUPPAUGE			0x2040
 #define USB_VID_HYPER_PALTEK			0x1025
 #define USB_VID_INTEL				0x8086
+#define USB_VID_ITETECH				0x048d
 #define USB_VID_KWORLD				0xeb2a
 #define USB_VID_KWORLD_2			0x1b80
 #define USB_VID_KYE				0x0458
@@ -126,6 +127,7 @@
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
 #define USB_PID_INTEL_CE9500				0x9500
+#define USB_PID_ITETECH_IT9135				0x9135
 #define USB_PID_KWORLD_399U				0xe399
 #define USB_PID_KWORLD_399U_2				0xe400
 #define USB_PID_KWORLD_395U				0xe396
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index f027a2c..c462261 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -60,6 +60,17 @@
 	u8 id;
 };
 
+struct ite_config {
+	u8 chip_ver;
+	u16 chip_type;
+	u32 firmware;
+	u8 tuner_id_0;
+	u8 tuner_id_1;
+	u8 dual_mode;
+};
+
+struct ite_config it913x_config;
+
 static int it913x_bulk_write(struct usb_device *dev,
 				u8 *snd, int len, u8 pipe)
 {
@@ -191,18 +202,23 @@
 static u32 it913x_query(struct usb_device *udev, u8 pro)
 {
 	int ret;
-	u32 res = 0;
 	u8 data[4];
 	ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
-		0x1222, 0, &data[0], 1);
-	if (data[0] == 0x1) {
-		ret = it913x_io(udev, READ_SHORT, pro,
-			CMD_QUERYINFO, 0, 0x1, &data[0], 4);
-		res = (data[0] << 24) + (data[1] << 16) +
-			(data[2] << 8) + data[3];
-	}
+		0x1222, 0, &data[0], 3);
 
-	return (ret < 0) ? 0 : res;
+	it913x_config.chip_ver = data[0];
+	it913x_config.chip_type = (u16)(data[2] << 8) + data[1];
+
+	info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver,
+		it913x_config.chip_type);
+
+	ret |= it913x_io(udev, READ_SHORT, pro,
+			CMD_QUERYINFO, 0, 0x1, &data[0], 4);
+
+	it913x_config.firmware = (data[0] << 24) + (data[1] << 16) +
+			(data[2] << 8) + data[3];
+
+	return (ret < 0) ? 0 : it913x_config.firmware;
 }
 
 static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
@@ -336,26 +352,35 @@
 		int *cold)
 {
 	int ret = 0, firm_no;
-	u8 reg, adap, ep, tun0, tun1;
+	u8 reg, remote;
 
 	firm_no = it913x_return_status(udev);
 
-	ep = it913x_read_reg(udev, 0x49ac);
-	adap = it913x_read_reg(udev, 0x49c5);
-	tun0 = it913x_read_reg(udev, 0x49d0);
-	info("No. Adapters=%x Endpoints=%x Tuner Type=%x", adap, ep, tun0);
+	/* checnk for dual mode */
+	it913x_config.dual_mode =  it913x_read_reg(udev, 0x49c5);
+
+	/* TODO different remotes */
+	remote = it913x_read_reg(udev, 0x49ac); /* Remote */
+	if (remote == 0)
+		props->rc.core.rc_codes = NULL;
+
+	/* TODO at the moment tuner_id is always assigned to 0x38 */
+	it913x_config.tuner_id_0 = it913x_read_reg(udev, 0x49d0);
+
+	info("Dual mode=%x Remote=%x Tuner Type=%x", it913x_config.dual_mode
+		, remote, it913x_config.tuner_id_0);
 
 	if (firm_no > 0) {
 		*cold = 0;
 		return 0;
 	}
 
-	if (adap > 2) {
-		tun1 = it913x_read_reg(udev, 0x49e0);
+	if (it913x_config.dual_mode) {
+		it913x_config.tuner_id_1 = it913x_read_reg(udev, 0x49e0);
 		ret = it913x_wr_reg(udev, DEV_0, GPIOH1_EN, 0x1);
 		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_ON, 0x1);
 		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1);
-		msleep(50); /* Delay noticed reset cycle ? */
+		msleep(50);
 		ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0);
 		msleep(50);
 		reg = it913x_read_reg(udev, GPIOH1_O);
@@ -366,14 +391,19 @@
 				ret = it913x_wr_reg(udev, DEV_0,
 					GPIOH1_O, 0x0);
 		}
+		props->num_adapters = 2;
 	} else
 		props->num_adapters = 1;
 
 	reg = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 
-	ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
-
-	ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x1);
+	if (it913x_config.dual_mode) {
+		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
+		ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x1);
+	} else {
+		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0);
+		ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x0);
+	}
 
 	*cold = 1;
 
@@ -403,13 +433,11 @@
 					const struct firmware *fw)
 {
 	int ret = 0, i;
-	u8 packet_size, dlen, tun1;
+	u8 packet_size, dlen;
 	u8 *fw_data;
 
 	packet_size = 0x29;
 
-	tun1 = it913x_read_reg(udev, 0x49e0);
-
 	ret = it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_100);
 
 	info("FRM Starting Firmware Download");
@@ -444,11 +472,12 @@
 	ret |= it913x_wr_reg(udev, DEV_0,  I2C_CLK, I2C_CLK_400);
 
 	/* Tuner function */
-	ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
+	if (it913x_config.dual_mode)
+		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
 
 	ret |= it913x_wr_reg(udev, DEV_0,  PADODPU, 0x0);
 	ret |= it913x_wr_reg(udev, DEV_0,  AGC_O_D, 0x0);
-	if (tun1 > 0) {
+	if (it913x_config.dual_mode) {
 		ret |= it913x_wr_reg(udev, DEV_1,  PADODPU, 0x0);
 		ret |= it913x_wr_reg(udev, DEV_1,  AGC_O_D, 0x0);
 	}
@@ -475,9 +504,28 @@
 	u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 	u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
 	u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
+	u8 tuner_id, tuner_type;
+
+	if (adap->id == 0)
+		tuner_id = it913x_config.tuner_id_0;
+	else
+		tuner_id = it913x_config.tuner_id_1;
+
+	/* TODO we always use IT9137 possible references here*/
+	/* Documentation suggests don't care */
+	switch (tuner_id) {
+	case 0x51:
+	case 0x52:
+	case 0x60:
+	case 0x61:
+	case 0x62:
+	default:
+	case 0x38:
+		tuner_type = IT9137;
+	}
 
 	adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
-		&adap->dev->i2c_adap, adap_addr, adf, IT9137);
+		&adap->dev->i2c_adap, adap_addr, adf, tuner_type);
 
 	if (adap->id == 0 && adap->fe_adap[0].fe) {
 		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
@@ -533,6 +581,7 @@
 
 static struct usb_device_id it913x_table[] = {
 	{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) },
+	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) },
 	{}		/* Terminating entry */
 };
 
@@ -608,12 +657,14 @@
 		.rc_codes	= RC_MAP_KWORLD_315U,
 	},
 	.i2c_algo         = &it913x_i2c_algo,
-	.num_device_descs = 1,
+	.num_device_descs = 2,
 	.devices = {
 		{   "Kworld UB499-2T T09(IT9137)",
 			{ &it913x_table[0], NULL },
 			},
-
+		{   "ITE 9135 Generic",
+			{ &it913x_table[1], NULL },
+			},
 	}
 };
 
@@ -647,5 +698,5 @@
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.06");
+MODULE_VERSION("1.07");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.c b/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
new file mode 100644
index 0000000..d1f5837
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
@@ -0,0 +1,614 @@
+/*
+ *  mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-demod.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_demod_debug;
+module_param_named(debug, mxl111sf_demod_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+	if (mxl111sf_demod_debug) \
+		mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_demod_state {
+	struct mxl111sf_state *mxl_state;
+
+	struct mxl111sf_demod_config *cfg;
+
+	struct dvb_frontend fe;
+};
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_read_reg(struct mxl111sf_demod_state *state,
+				   u8 addr, u8 *data)
+{
+	return (state->cfg->read_reg) ?
+		state->cfg->read_reg(state->mxl_state, addr, data) :
+		-EINVAL;
+}
+
+static int mxl111sf_demod_write_reg(struct mxl111sf_demod_state *state,
+				    u8 addr, u8 data)
+{
+	return (state->cfg->write_reg) ?
+		state->cfg->write_reg(state->mxl_state, addr, data) :
+		-EINVAL;
+}
+
+static
+int mxl111sf_demod_program_regs(struct mxl111sf_demod_state *state,
+				struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+	return (state->cfg->program_regs) ?
+		state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+		-EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+/* TPS */
+
+static
+int mxl1x1sf_demod_get_tps_code_rate(struct mxl111sf_demod_state *state,
+				     fe_code_rate_t *code_rate)
+{
+	u8 val;
+	int ret = mxl111sf_demod_read_reg(state, V6_CODE_RATE_TPS_REG, &val);
+	/* bit<2:0> - 000:1/2, 001:2/3, 010:3/4, 011:5/6, 100:7/8 */
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch (val & V6_CODE_RATE_TPS_MASK) {
+	case 0:
+		*code_rate = FEC_1_2;
+		break;
+	case 1:
+		*code_rate = FEC_2_3;
+		break;
+	case 2:
+		*code_rate = FEC_3_4;
+		break;
+	case 3:
+		*code_rate = FEC_5_6;
+		break;
+	case 4:
+		*code_rate = FEC_7_8;
+		break;
+	}
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_constellation(struct mxl111sf_demod_state *state,
+					 fe_modulation_t *constellation)
+{
+	u8 val;
+	int ret = mxl111sf_demod_read_reg(state, V6_MODORDER_TPS_REG, &val);
+	/* Constellation, 00 : QPSK, 01 : 16QAM, 10:64QAM */
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch ((val & V6_PARAM_CONSTELLATION_MASK) >> 4) {
+	case 0:
+		*constellation = QPSK;
+		break;
+	case 1:
+		*constellation = QAM_16;
+		break;
+	case 2:
+		*constellation = QAM_64;
+		break;
+	}
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_fft_mode(struct mxl111sf_demod_state *state,
+					  fe_transmit_mode_t *fft_mode)
+{
+	u8 val;
+	int ret = mxl111sf_demod_read_reg(state, V6_MODE_TPS_REG, &val);
+	/* FFT Mode, 00:2K, 01:8K, 10:4K */
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch ((val & V6_PARAM_FFT_MODE_MASK) >> 2) {
+	case 0:
+		*fft_mode = TRANSMISSION_MODE_2K;
+		break;
+	case 1:
+		*fft_mode = TRANSMISSION_MODE_8K;
+		break;
+	case 2:
+		*fft_mode = TRANSMISSION_MODE_4K;
+		break;
+	}
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_interval(struct mxl111sf_demod_state *state,
+					  fe_guard_interval_t *guard)
+{
+	u8 val;
+	int ret = mxl111sf_demod_read_reg(state, V6_CP_TPS_REG, &val);
+	/* 00:1/32, 01:1/16, 10:1/8, 11:1/4 */
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch ((val & V6_PARAM_GI_MASK) >> 4) {
+	case 0:
+		*guard = GUARD_INTERVAL_1_32;
+		break;
+	case 1:
+		*guard = GUARD_INTERVAL_1_16;
+		break;
+	case 2:
+		*guard = GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		*guard = GUARD_INTERVAL_1_4;
+		break;
+	}
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_hierarchy(struct mxl111sf_demod_state *state,
+				     fe_hierarchy_t *hierarchy)
+{
+	u8 val;
+	int ret = mxl111sf_demod_read_reg(state, V6_TPS_HIERACHY_REG, &val);
+	/* bit<6:4> - 000:Non hierarchy, 001:1, 010:2, 011:4 */
+	if (mxl_fail(ret))
+		goto fail;
+
+	switch ((val & V6_TPS_HIERARCHY_INFO_MASK) >> 6) {
+	case 0:
+		*hierarchy = HIERARCHY_NONE;
+		break;
+	case 1:
+		*hierarchy = HIERARCHY_1;
+		break;
+	case 2:
+		*hierarchy = HIERARCHY_2;
+		break;
+	case 3:
+		*hierarchy = HIERARCHY_4;
+		break;
+	}
+fail:
+	return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+/* LOCKS */
+
+static
+int mxl1x1sf_demod_get_sync_lock_status(struct mxl111sf_demod_state *state,
+					int *sync_lock)
+{
+	u8 val = 0;
+	int ret = mxl111sf_demod_read_reg(state, V6_SYNC_LOCK_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+	*sync_lock = (val & SYNC_LOCK_MASK) >> 4;
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_rs_lock_status(struct mxl111sf_demod_state *state,
+				      int *rs_lock)
+{
+	u8 val = 0;
+	int ret = mxl111sf_demod_read_reg(state, V6_RS_LOCK_DET_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+	*rs_lock = (val & RS_LOCK_DET_MASK) >> 3;
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_lock_status(struct mxl111sf_demod_state *state,
+				       int *tps_lock)
+{
+	u8 val = 0;
+	int ret = mxl111sf_demod_read_reg(state, V6_TPS_LOCK_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+	*tps_lock = (val & V6_PARAM_TPS_LOCK_MASK) >> 6;
+fail:
+	return ret;
+}
+
+static
+int mxl1x1sf_demod_get_fec_lock_status(struct mxl111sf_demod_state *state,
+				       int *fec_lock)
+{
+	u8 val = 0;
+	int ret = mxl111sf_demod_read_reg(state, V6_IRQ_STATUS_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+	*fec_lock = (val & IRQ_MASK_FEC_LOCK) >> 4;
+fail:
+	return ret;
+}
+
+#if 0
+static
+int mxl1x1sf_demod_get_cp_lock_status(struct mxl111sf_demod_state *state,
+				      int *cp_lock)
+{
+	u8 val = 0;
+	int ret = mxl111sf_demod_read_reg(state, V6_CP_LOCK_DET_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+	*cp_lock = (val & V6_CP_LOCK_DET_MASK) >> 2;
+fail:
+	return ret;
+}
+#endif
+
+static int mxl1x1sf_demod_reset_irq_status(struct mxl111sf_demod_state *state)
+{
+	return mxl111sf_demod_write_reg(state, 0x0e, 0xff);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_set_frontend(struct dvb_frontend *fe,
+				       struct dvb_frontend_parameters *param)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	int ret = 0;
+
+	struct mxl111sf_reg_ctrl_info phy_pll_patch[] = {
+		{0x00, 0xff, 0x01}, /* change page to 1 */
+		{0x40, 0xff, 0x05},
+		{0x40, 0xff, 0x01},
+		{0x41, 0xff, 0xca},
+		{0x41, 0xff, 0xc0},
+		{0x00, 0xff, 0x00}, /* change page to 0 */
+		{0,    0,    0}
+	};
+
+	mxl_dbg("()");
+
+	if (fe->ops.tuner_ops.set_params) {
+		ret = fe->ops.tuner_ops.set_params(fe, param);
+		if (mxl_fail(ret))
+			goto fail;
+		msleep(50);
+	}
+	ret = mxl111sf_demod_program_regs(state, phy_pll_patch);
+	mxl_fail(ret);
+	msleep(50);
+	ret = mxl1x1sf_demod_reset_irq_status(state);
+	mxl_fail(ret);
+	msleep(100);
+fail:
+	return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+/* resets TS Packet error count */
+/* After setting 7th bit of V5_PER_COUNT_RESET_REG, it should be reset to 0. */
+static
+int mxl1x1sf_demod_reset_packet_error_count(struct mxl111sf_demod_state *state)
+{
+	struct mxl111sf_reg_ctrl_info reset_per_count[] = {
+		{0x20, 0x01, 0x01},
+		{0x20, 0x01, 0x00},
+		{0,    0,    0}
+	};
+	return mxl111sf_demod_program_regs(state, reset_per_count);
+}
+#endif
+
+/* returns TS Packet error count */
+/* PER Count = FEC_PER_COUNT * (2 ** (FEC_PER_SCALE * 4)) */
+static int mxl111sf_demod_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	u32 fec_per_count, fec_per_scale;
+	u8 val;
+	int ret;
+
+	*ucblocks = 0;
+
+	/* FEC_PER_COUNT Register */
+	ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_COUNT_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+
+	fec_per_count = val;
+
+	/* FEC_PER_SCALE Register */
+	ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_SCALE_REG, &val);
+	if (mxl_fail(ret))
+		goto fail;
+
+	val &= V6_FEC_PER_SCALE_MASK;
+	val *= 4;
+
+	fec_per_scale = 1 << val;
+
+	fec_per_count *= fec_per_scale;
+
+	*ucblocks = fec_per_count;
+fail:
+	return ret;
+}
+
+#ifdef MXL111SF_DEMOD_ENABLE_CALCULATIONS
+/* FIXME: leaving this enabled breaks the build on some architectures,
+ * and we shouldn't have any floating point math in the kernel, anyway.
+ *
+ * These macros need to be re-written, but it's harmless to simply
+ * return zero for now. */
+#define CALCULATE_BER(avg_errors, count) \
+	((u32)(avg_errors * 4)/(count*64*188*8))
+#define CALCULATE_SNR(data) \
+	((u32)((10 * (u32)data / 64) - 2.5))
+#else
+#define CALCULATE_BER(avg_errors, count) 0
+#define CALCULATE_SNR(data) 0
+#endif
+
+static int mxl111sf_demod_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	u8 val1, val2, val3;
+	int ret;
+
+	*ber = 0;
+
+	ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_LSB_REG, &val1);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_MSB_REG, &val2);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl111sf_demod_read_reg(state, V6_N_ACCUMULATE_REG, &val3);
+	if (mxl_fail(ret))
+		goto fail;
+
+	*ber = CALCULATE_BER((val1 | (val2 << 8)), val3);
+fail:
+	return ret;
+}
+
+static int mxl111sf_demod_calc_snr(struct mxl111sf_demod_state *state,
+				   u16 *snr)
+{
+	u8 val1, val2;
+	int ret;
+
+	*snr = 0;
+
+	ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_LSB_REG, &val1);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_MSB_REG, &val2);
+	if (mxl_fail(ret))
+		goto fail;
+
+	*snr = CALCULATE_SNR(val1 | ((val2 & 0x03) << 8));
+fail:
+	return ret;
+}
+
+static int mxl111sf_demod_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+	int ret = mxl111sf_demod_calc_snr(state, snr);
+	if (mxl_fail(ret))
+		goto fail;
+
+	*snr /= 10; /* 0.1 dB */
+fail:
+	return ret;
+}
+
+static int mxl111sf_demod_read_status(struct dvb_frontend *fe,
+				      fe_status_t *status)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	int ret, locked, cr_lock, sync_lock, fec_lock;
+
+	*status = 0;
+
+	ret = mxl1x1sf_demod_get_rs_lock_status(state, &locked);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl1x1sf_demod_get_tps_lock_status(state, &cr_lock);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl1x1sf_demod_get_sync_lock_status(state, &sync_lock);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl1x1sf_demod_get_fec_lock_status(state, &fec_lock);
+	if (mxl_fail(ret))
+		goto fail;
+
+	if (locked)
+		*status |= FE_HAS_SIGNAL;
+	if (cr_lock)
+		*status |= FE_HAS_CARRIER;
+	if (sync_lock)
+		*status |= FE_HAS_SYNC;
+	if (fec_lock) /* false positives? */
+		*status |= FE_HAS_VITERBI;
+
+	if ((locked) && (cr_lock) && (sync_lock))
+		*status |= FE_HAS_LOCK;
+fail:
+	return ret;
+}
+
+static int mxl111sf_demod_read_signal_strength(struct dvb_frontend *fe,
+					       u16 *signal_strength)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	fe_modulation_t constellation;
+	u16 snr;
+
+	mxl111sf_demod_calc_snr(state, &snr);
+	mxl1x1sf_demod_get_tps_constellation(state, &constellation);
+
+	switch (constellation) {
+	case QPSK:
+		*signal_strength = (snr >= 1300) ?
+			min(65535, snr * 44) : snr * 38;
+		break;
+	case QAM_16:
+		*signal_strength = (snr >= 1500) ?
+			min(65535, snr * 38) : snr * 33;
+		break;
+	case QAM_64:
+		*signal_strength = (snr >= 2000) ?
+			min(65535, snr * 29) : snr * 25;
+		break;
+	default:
+		*signal_strength = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxl111sf_demod_get_frontend(struct dvb_frontend *fe,
+				       struct dvb_frontend_parameters *p)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+	mxl_dbg("()");
+#if 0
+	p->inversion = /* FIXME */ ? INVERSION_ON : INVERSION_OFF;
+#endif
+	if (fe->ops.tuner_ops.get_bandwidth)
+		fe->ops.tuner_ops.get_bandwidth(fe, &p->u.ofdm.bandwidth);
+	if (fe->ops.tuner_ops.get_frequency)
+		fe->ops.tuner_ops.get_frequency(fe, &p->frequency);
+	mxl1x1sf_demod_get_tps_code_rate(state, &p->u.ofdm.code_rate_HP);
+	mxl1x1sf_demod_get_tps_code_rate(state, &p->u.ofdm.code_rate_LP);
+	mxl1x1sf_demod_get_tps_constellation(state, &p->u.ofdm.constellation);
+	mxl1x1sf_demod_get_tps_guard_fft_mode(state,
+					      &p->u.ofdm.transmission_mode);
+	mxl1x1sf_demod_get_tps_guard_interval(state,
+					      &p->u.ofdm.guard_interval);
+	mxl1x1sf_demod_get_tps_hierarchy(state,
+					 &p->u.ofdm.hierarchy_information);
+
+	return 0;
+}
+
+static
+int mxl111sf_demod_get_tune_settings(struct dvb_frontend *fe,
+				     struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	return 0;
+}
+
+static void mxl111sf_demod_release(struct dvb_frontend *fe)
+{
+	struct mxl111sf_demod_state *state = fe->demodulator_priv;
+	mxl_dbg("()");
+	kfree(state);
+	fe->demodulator_priv = NULL;
+}
+
+static struct dvb_frontend_ops mxl111sf_demod_ops = {
+
+	.info = {
+		.name               = "MaxLinear MxL111SF DVB-T demodulator",
+		.type               = FE_OFDM,
+		.frequency_min      = 177000000,
+		.frequency_max      = 858000000,
+		.frequency_stepsize = 166666,
+		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+			FE_CAN_QAM_AUTO |
+			FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
+	},
+	.release              = mxl111sf_demod_release,
+#if 0
+	.init                 = mxl111sf_init,
+	.i2c_gate_ctrl        = mxl111sf_i2c_gate_ctrl,
+#endif
+	.set_frontend         = mxl111sf_demod_set_frontend,
+	.get_frontend         = mxl111sf_demod_get_frontend,
+	.get_tune_settings    = mxl111sf_demod_get_tune_settings,
+	.read_status          = mxl111sf_demod_read_status,
+	.read_signal_strength = mxl111sf_demod_read_signal_strength,
+	.read_ber             = mxl111sf_demod_read_ber,
+	.read_snr             = mxl111sf_demod_read_snr,
+	.read_ucblocks        = mxl111sf_demod_read_ucblocks,
+};
+
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+					   struct mxl111sf_demod_config *cfg)
+{
+	struct mxl111sf_demod_state *state = NULL;
+
+	mxl_dbg("()");
+
+	state = kzalloc(sizeof(struct mxl111sf_demod_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
+
+	state->mxl_state = mxl_state;
+	state->cfg = cfg;
+
+	memcpy(&state->fe.ops, &mxl111sf_demod_ops,
+	       sizeof(struct dvb_frontend_ops));
+
+	state->fe.demodulator_priv = state;
+	return &state->fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.h b/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
new file mode 100644
index 0000000..432706a
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
@@ -0,0 +1,55 @@
+/*
+ *  mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_DEMOD_H__
+#define __MXL111SF_DEMOD_H__
+
+#include "dvb_frontend.h"
+#include "mxl111sf.h"
+
+struct mxl111sf_demod_config {
+	int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+	int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+	int (*program_regs)(struct mxl111sf_state *state,
+			    struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+};
+
+#if defined(CONFIG_DVB_USB_MXL111SF) || \
+	(defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
+extern
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+					   struct mxl111sf_demod_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+					   struct mxl111sf_demod_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_USB_MXL111SF */
+
+#endif /* __MXL111SF_DEMOD_H__ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
index 2e8c288..3443455 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
@@ -398,7 +398,6 @@
 	u8 i2c_r_data[24];
 	u8 i = 0;
 	u8 fifo_status = 0;
-	int ret;
 	int status = 0;
 
 	mxl_i2c("read %d bytes", count);
@@ -418,7 +417,7 @@
 		i2c_w_data[4+(i*3)] = 0x00;
 	}
 
-	ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+	mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
 
 	/* Check for I2C NACK status */
 	if (mxl111sf_i2c_check_status(state) == 1) {
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
index 91dc1fc..b741b3a 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
@@ -296,8 +296,7 @@
 		goto fail;
 
 	ret = mxl111sf_write_reg(state, 0x00, 0x00);
-	if (mxl_fail(ret))
-		goto fail;
+	mxl_fail(ret);
 fail:
 	return ret;
 }
@@ -328,11 +327,13 @@
 		/* set hysteresis value  reg: 0x0B<5:0> */
 		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
 					 (hysteresis_value & 0x3F));
+		mxl_fail(ret);
 	}
 
 	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+	mxl_fail(ret);
 
-	return val;
+	return ret;
 }
 
 /*
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
index 546ba59..b5c98da 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.c
@@ -17,6 +17,7 @@
 #include "mxl111sf-i2c.h"
 #include "mxl111sf-gpio.h"
 
+#include "mxl111sf-demod.h"
 #include "mxl111sf-tuner.h"
 
 #include "lgdt3305.h"
@@ -362,6 +363,22 @@
 	return ret;
 }
 
+static int mxl111sf_ep4_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct dvb_usb_device *d = adap->dev;
+	struct mxl111sf_state *state = d->priv;
+	int ret = 0;
+
+	deb_info("%s(%d)\n", __func__, onoff);
+
+	if (onoff) {
+		ret = mxl111sf_enable_usb_output(state);
+		mxl_fail(ret);
+	}
+
+	return ret;
+}
+
 /* ------------------------------------------------------------------------ */
 
 static struct lgdt3305_config hauppauge_lgdt3305_config = {
@@ -438,6 +455,70 @@
 	return ret;
 }
 
+static struct mxl111sf_demod_config mxl_demod_config = {
+	.read_reg        = mxl111sf_read_reg,
+	.write_reg       = mxl111sf_write_reg,
+	.program_regs    = mxl111sf_ctrl_program_regs,
+};
+
+static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap->dev;
+	struct mxl111sf_state *state = d->priv;
+	int fe_id = adap->num_frontends_initialized;
+	struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
+	int ret;
+
+	deb_adv("%s()\n", __func__);
+
+	/* save a pointer to the dvb_usb_device in device state */
+	state->d = d;
+	adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2;
+	state->alt_mode = adap_state->alt_mode;
+
+	if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+		err("set interface failed");
+
+	state->gpio_mode = MXL111SF_GPIO_MOD_DVBT;
+	adap_state->gpio_mode = state->gpio_mode;
+	adap_state->device_mode = MXL_SOC_MODE;
+	adap_state->ep6_clockphase = 1;
+
+	ret = mxl1x1sf_soft_reset(state);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl111sf_init_tuner_demod(state);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_enable_usb_output(state);
+	if (mxl_fail(ret))
+		goto fail;
+	ret = mxl1x1sf_top_master_ctrl(state, 1);
+	if (mxl_fail(ret))
+		goto fail;
+
+	/* dont care if this fails */
+	mxl111sf_init_port_expander(state);
+
+	adap->fe_adap[fe_id].fe = dvb_attach(mxl111sf_demod_attach, state,
+			      &mxl_demod_config);
+	if (adap->fe_adap[fe_id].fe) {
+		adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
+		adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
+		adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
+		adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
+		return 0;
+	}
+	ret = -EIO;
+fail:
+	return ret;
+}
+
 static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
 					int antpath)
 {
@@ -567,7 +648,8 @@
 #endif
 };
 
-/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties;
+static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties;
 static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties;
 static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties;
 
@@ -580,9 +662,15 @@
 
 	if (((dvb_usb_mxl111sf_isoc) &&
 	     (0 == dvb_usb_device_init(intf,
+				       &mxl111sf_dvbt_isoc_properties,
+				       THIS_MODULE, &d, adapter_nr) ||
+	      0 == dvb_usb_device_init(intf,
 				       &mxl111sf_atsc_isoc_properties,
 				       THIS_MODULE, &d, adapter_nr))) ||
 	    0 == dvb_usb_device_init(intf,
+				     &mxl111sf_dvbt_bulk_properties,
+				     THIS_MODULE, &d, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf,
 				     &mxl111sf_atsc_bulk_properties,
 				     THIS_MODULE, &d, adapter_nr) || 0) {
 
@@ -669,6 +757,36 @@
 MODULE_DEVICE_TABLE(usb, mxl111sf_table);
 
 
+#define MXL111SF_EP4_BULK_STREAMING_CONFIG		\
+	.streaming_ctrl = mxl111sf_ep4_streaming_ctrl,	\
+	.stream = {					\
+		.type = USB_BULK,			\
+		.count = 5,				\
+		.endpoint = 0x04,			\
+		.u = {					\
+			.bulk = {			\
+				.buffersize = 8192,	\
+			}				\
+		}					\
+	}
+
+/* FIXME: works for v6 but not v8 silicon */
+#define MXL111SF_EP4_ISOC_STREAMING_CONFIG		\
+	.streaming_ctrl = mxl111sf_ep4_streaming_ctrl,	\
+	.stream = {					\
+		.type = USB_ISOC,			\
+		.count = 5,				\
+		.endpoint = 0x04,			\
+		.u = {					\
+			.isoc = {			\
+				.framesperurb = 96,	\
+				/* FIXME: v6 SILICON: */	\
+				.framesize = 564,	\
+				.interval = 1,		\
+			}				\
+		}					\
+	}
+
 #define MXL111SF_EP6_BULK_STREAMING_CONFIG		\
 	.streaming_ctrl = mxl111sf_ep6_streaming_ctrl,	\
 	.stream = {					\
@@ -712,7 +830,7 @@
 	.generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \
 	.size_of_priv     = sizeof(struct mxl111sf_state)
 
-static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties = {
 	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
 
 	.num_adapters = 1,
@@ -723,10 +841,106 @@
 		.fe = {{
 			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
 
+			.frontend_attach  = mxl111sf_attach_demod,
+			.tuner_attach     = mxl111sf_attach_tuner,
+
+			MXL111SF_EP4_BULK_STREAMING_CONFIG,
+		} },
+		},
+	},
+	.num_device_descs = 4,
+	.devices = {
+		{   "Hauppauge 126xxx DVBT (bulk)",
+			{ NULL },
+			{ &mxl111sf_table[4], &mxl111sf_table[8],
+			  NULL },
+		},
+		{   "Hauppauge 117xxx DVBT (bulk)",
+			{ NULL },
+			{ &mxl111sf_table[15], &mxl111sf_table[18],
+			  NULL },
+		},
+		{   "Hauppauge 138xxx DVBT (bulk)",
+			{ NULL },
+			{ &mxl111sf_table[20], &mxl111sf_table[22],
+			  &mxl111sf_table[24], &mxl111sf_table[26],
+			  NULL },
+		},
+		{   "Hauppauge 126xxx (tp-bulk)",
+			{ NULL },
+			{ &mxl111sf_table[28], &mxl111sf_table[30],
+			  NULL },
+		},
+	}
+};
+
+static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties = {
+	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
+		.num_frontends = 1,
+		.fe = {{
+			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
+
+			.frontend_attach  = mxl111sf_attach_demod,
+			.tuner_attach     = mxl111sf_attach_tuner,
+
+			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
+		} },
+		},
+	},
+	.num_device_descs = 4,
+	.devices = {
+		{   "Hauppauge 126xxx DVBT (isoc)",
+			{ NULL },
+			{ &mxl111sf_table[4], &mxl111sf_table[8],
+			  NULL },
+		},
+		{   "Hauppauge 117xxx DVBT (isoc)",
+			{ NULL },
+			{ &mxl111sf_table[15], &mxl111sf_table[18],
+			  NULL },
+		},
+		{   "Hauppauge 138xxx DVBT (isoc)",
+			{ NULL },
+			{ &mxl111sf_table[20], &mxl111sf_table[22],
+			  &mxl111sf_table[24], &mxl111sf_table[26],
+			  NULL },
+		},
+		{   "Hauppauge 126xxx (tp-isoc)",
+			{ NULL },
+			{ &mxl111sf_table[28], &mxl111sf_table[30],
+			  NULL },
+		},
+	}
+};
+
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+	MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
+		.num_frontends = 2,
+		.fe = {{
+			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
+
 			.frontend_attach  = mxl111sf_lgdt3305_frontend_attach,
 			.tuner_attach     = mxl111sf_attach_tuner,
 
 			MXL111SF_EP6_BULK_STREAMING_CONFIG,
+		},
+		{
+			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
+
+			.frontend_attach  = mxl111sf_attach_demod,
+			.tuner_attach     = mxl111sf_attach_tuner,
+
+			MXL111SF_EP4_BULK_STREAMING_CONFIG,
 		}},
 		},
 	},
@@ -776,7 +990,7 @@
 	.adapter = {
 		{
 		.fe_ioctl_override = mxl111sf_fe_ioctl_override,
-		.num_frontends = 1,
+		.num_frontends = 2,
 		.fe = {{
 			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
 
@@ -784,6 +998,14 @@
 			.tuner_attach     = mxl111sf_attach_tuner,
 
 			MXL111SF_EP6_ISOC_STREAMING_CONFIG,
+		},
+		{
+			.size_of_priv     = sizeof(struct mxl111sf_adap_state),
+
+			.frontend_attach  = mxl111sf_attach_demod,
+			.tuner_attach     = mxl111sf_attach_tuner,
+
+			MXL111SF_EP4_ISOC_STREAMING_CONFIG,
 		}},
 		},
 	},
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h
index 5a2c7bb..364d89f 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf.h
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.h
@@ -133,7 +133,7 @@
 /* The following allows the mxl_fail() macro defined below to work
  * in externel modules, such as mxl111sf-tuner.ko, even though
  * dvb_usb_mxl111sf_debug is not defined within those modules */
-#ifdef __MXL111SF_TUNER_H__
+#if (defined(__MXL111SF_TUNER_H__)) || (defined(__MXL111SF_DEMOD_H__))
 #define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
 #else
 #define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index 774d507..43be723 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -1,5 +1,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 
 #include "dibx000_common.h"
 
diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/dvb/ngene/Makefile
index 8987361..13ebeff 100644
--- a/drivers/media/dvb/ngene/Makefile
+++ b/drivers/media/dvb/ngene/Makefile
@@ -11,4 +11,4 @@
 ccflags-y += -Idrivers/media/common/tuners/
 
 # For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index af121db..680c781 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -19,6 +19,7 @@
 
 #include "sms-cards.h"
 #include "smsir.h"
+#include <linux/module.h>
 
 static int sms_dbg;
 module_param_named(cards_dbg, sms_dbg, int, 0644);
diff --git a/drivers/media/dvb/siano/smsendian.c b/drivers/media/dvb/siano/smsendian.c
index 457b6d0..e2657c2 100644
--- a/drivers/media/dvb/siano/smsendian.c
+++ b/drivers/media/dvb/siano/smsendian.c
@@ -19,6 +19,7 @@
 
  ****************************************************************/
 
+#include <linux/export.h>
 #include <asm/byteorder.h>
 
 #include "smsendian.h"
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
index e57d38b..91f8c82 100644
--- a/drivers/media/dvb/siano/smssdio.c
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -39,6 +39,7 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
+#include <linux/module.h>
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 0c8164a..51c7121 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -24,6 +24,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c
index 16b70b4..6edc9ba 100644
--- a/drivers/media/media-device.c
+++ b/drivers/media/media-device.c
@@ -23,6 +23,7 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/media.h>
+#include <linux/export.h>
 
 #include <media/media-device.h>
 #include <media/media-devnode.h>
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 52798a1..ccd5f0d 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -426,7 +426,6 @@
 config RADIO_WL1273
 	tristate "Texas Instruments WL1273 I2C FM Radio"
 	depends on I2C && VIDEO_V4L2
-	select MFD_CORE
 	select MFD_WL1273_CORE
 	select FW_LOADER
 	---help---
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 95ddcc4..db20904 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -128,8 +128,10 @@
 	u16 rdsbbl;				/* PAUSEDET & RDSBBL */
 } __attribute__ ((packed));
 
-#ifndef RADIO_TEA5764_XTAL
+#ifdef CONFIG_RADIO_TEA5764_XTAL
 #define RADIO_TEA5764_XTAL 1
+#else
+#define RADIO_TEA5764_XTAL 0
 #endif
 
 static int radio_nr = -1;
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
index f17b540..3e9209f 100644
--- a/drivers/media/radio/radio-timb.c
+++ b/drivers/media/radio/radio-timb.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <media/timb_radio.h>
 
 #define DRIVER_NAME "timb-radio"
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 6d1e4e7..8aa4968 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/wl1273-core.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index c9f4a8e6..27aba93 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index b93d8cf..4f5c43d 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -28,6 +28,8 @@
  *
  */
 
+#include <linux/export.h>
+
 #include "fmdrv.h"
 #include "fmdrv_v4l2.h"
 #include "fmdrv_common.h"
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index 624449a..035668e 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/bitrev.h>
+#include <linux/module.h>
 #include "rc-core-priv.h"
 
 #define JVC_NBITS		16		/* dev(8) + func(8) */
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index ec2e67f..5faba2a 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -14,6 +14,7 @@
 
 #include <linux/sched.h>
 #include <linux/wait.h>
+#include <linux/module.h>
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
 #include <media/rc-core.h>
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 63ee722..17f8db0 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/bitrev.h>
+#include <linux/module.h>
 #include "rc-core-priv.h"
 
 #define NEC_NBITS		32
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 27808bb5..2e5cd31 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -12,8 +12,10 @@
  *  GNU General Public License for more details.
  */
 
+#include <linux/export.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
+#include <linux/kmod.h>
 #include <linux/sched.h>
 #include <linux/freezer.h>
 #include "rc-core-priv.h"
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index ebdba55..9ab663a 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -21,6 +21,7 @@
  */
 
 #include "rc-core-priv.h"
+#include <linux/module.h>
 
 #define RC5_NBITS		14
 #define RC5X_NBITS		20
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index 90aa886..ec8d4a2 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -21,6 +21,7 @@
  */
 
 #include "rc-core-priv.h"
+#include <linux/module.h>
 
 #define RC5_SZ_NBITS		15
 #define RC5_UNIT		888888 /* ns */
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 755dafa..140fb67 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -13,6 +13,7 @@
  */
 
 #include "rc-core-priv.h"
+#include <linux/module.h>
 
 /*
  * This decoder currently supports:
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index a92de80..d5e2b50 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/bitrev.h>
+#include <linux/module.h>
 #include "rc-core-priv.h"
 
 #define SONY_UNIT		600000 /* ns */
diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index 9a8752f..b0e42df 100644
--- a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* ADS Tech Instant TV DVB-T PCI Remote */
 
diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
index fe652e9..4e6ade8 100644
--- a/drivers/media/rc/keymaps/rc-alink-dtu-m.c
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
 static struct rc_map_table alink_dtu_m[] = {
diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
index 884f1b5..c735fe1 100644
--- a/drivers/media/rc/keymaps/rc-anysee.c
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table anysee[] = {
 	{ 0x0800, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
index 7af1882..8c92ff9 100644
--- a/drivers/media/rc/keymaps/rc-apac-viewcomp.c
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Attila Kondoros <attila.kondoros@chello.hu> */
 
diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
index b248115..2caf211 100644
--- a/drivers/media/rc/keymaps/rc-asus-pc39.c
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Marc Fargas <telenieko@telenieko.com>
diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
index f766b24..2031224 100644
--- a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* ATI TV Wonder HD 600 USB
    Devin Heitmueller <devin.heitmueller@gmail.com>
diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
index ec9beee..894939a 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-a16d.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table avermedia_a16d[] = {
 	{ 0x20, KEY_LIST},
diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
index 22f54d4..d2aaf5b 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Oldrich Jedlicka <oldium.pro@seznam.cz> */
 
diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index c25809d..dc2baf0 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Matt Jesson <dvb@jesson.eclipse.co.uk */
 
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index 3d2cbe4..04269d3 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Avermedia M135A with RM-JX and RM-K6 remote controls
diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index 8cd7f28..e83b1a1 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -9,6 +9,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Avermedia M733A with IR model RM-K6
diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index 9d68af2..8344bcc 100644
--- a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
    and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
index edfa715..c6063df 100644
--- a/drivers/media/rc/keymaps/rc-avermedia.c
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Alex Hermann <gaaf@gmx.net> */
 
diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
index 32e9498..14f7845 100644
--- a/drivers/media/rc/keymaps/rc-avertv-303.c
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* AVERTV STUDIO 303 Remote */
 
diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
index c3f6d62..ea7f2d0 100644
--- a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table azurewave_ad_tu700[] = {
 	{ 0x0000, KEY_TAB },             /* Tab */
diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 8bf058f..086b4b1 100644
--- a/drivers/media/rc/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Beholder Intl. Ltd. 2008
  * Dmitry Belimov d.belimov@google.com
diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index c909a23..0877e34 100644
--- a/drivers/media/rc/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Igor Kuznetsov <igk72@ya.ru>
diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index 2f66e43..8311e09 100644
--- a/drivers/media/rc/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * From reading the following remotes:
diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
index 284534b..0c87fba 100644
--- a/drivers/media/rc/keymaps/rc-cinergy-1400.c
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Cinergy 1400 DVB-T */
 
diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index cf3a6bf..309e9e3 100644
--- a/drivers/media/rc/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table cinergy[] = {
 	{ 0x00, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
index 7a5f530..4d13a7f 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-nec.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -16,6 +16,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table dib0700_nec_table[] = {
 	/* Key codes for the Pixelview SBTVD remote */
diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
index 4af12e4..ba81d96 100644
--- a/drivers/media/rc/keymaps/rc-dib0700-rc5.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -16,6 +16,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table dib0700_rc5_table[] = {
 	/* Key codes for the tiny Pinnacle remote*/
diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
index f68b450..bed78acb 100644
--- a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table digitalnow_tinytwin[] = {
 	{ 0x0000, KEY_MUTE },            /* [symbol speaker] */
diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
index 21d4987..a3b97a1 100644
--- a/drivers/media/rc/keymaps/rc-digittrade.c
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Digittrade DVB-T USB Stick remote controller. */
 /* Imported from af9015.h.
diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
index d024fbf..67fc9fb 100644
--- a/drivers/media/rc/keymaps/rc-dm1105-nec.c
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* DVBWorld remotes
    Igor M. Liplianin <liplianin@me.by>
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index 82c0200..91ea91d 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* DigitalNow DNTV Live DVB-T Remote */
 
diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
index 015e99d..fd680d4 100644
--- a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* DigitalNow DNTV Live! DVB-T Pro Remote */
 
diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
index 269d429..d1fcd64 100644
--- a/drivers/media/rc/keymaps/rc-em-terratec.c
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table em_terratec[] = {
 	{ 0x01, KEY_CHANNEL },
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
index e388698..2fe45e4 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Encore ENLTV-FM v5.3
    Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index e56ac6e..223de75 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Encore ENLTV-FM  - black plastic, white front cover with white glowing buttons
     Juan Pablo Sormani <sorman@gmail.com> */
diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index b6264f1..669cbff 100644
--- a/drivers/media/rc/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
     Mauro Carvalho Chehab <mchehab@infradead.org> */
diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
index a2bf24f..2c647fc 100644
--- a/drivers/media/rc/keymaps/rc-evga-indtube.c
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* EVGA inDtube
    Devin Heitmueller <devin.heitmueller@gmail.com>
diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
index 1e8e5b2..7692144 100644
--- a/drivers/media/rc/keymaps/rc-eztv.c
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Alfons Geser <a.geser@cox.net>
  * updates from Job D. R. Borges <jobdrb@ig.com.br> */
diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index a8b0f66..3a6bba3 100644
--- a/drivers/media/rc/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table flydvb[] = {
 	{ 0x01, KEY_ZOOM },		/* Full Screen */
diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
index 5bbe683..bf9da58 100644
--- a/drivers/media/rc/keymaps/rc-flyvideo.c
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table flyvideo[] = {
 	{ 0x0f, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
index c80b25c..2f0970f 100644
--- a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* DViCO FUSION HDTV MCE remote */
 
diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
index 068c9ea..0e98ec4 100644
--- a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* GADMEI UTV330+ RM008Z remote
    Shine Liu <shinel@foxmail.com>
diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
index cdbbed4..a2e2faa 100644
--- a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Remote control for the Genius TVGO A11MCE
diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
index a38bdde..864614e 100644
--- a/drivers/media/rc/keymaps/rc-gotview7135.c
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Mike Baikov <mike@baikov.com> */
 
diff --git a/drivers/media/rc/keymaps/rc-hauppauge.c b/drivers/media/rc/keymaps/rc-hauppauge.c
index cd3db77..e51c616 100644
--- a/drivers/media/rc/keymaps/rc-hauppauge.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge.c
@@ -17,6 +17,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Hauppauge:the newer, gray remotes (seems there are multiple
diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index 0ea2aa1..124c722 100644
--- a/drivers/media/rc/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* mce-mode imon mce remote key table */
 static struct rc_map_table imon_mce[] = {
diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index 75d3843..999c629 100644
--- a/drivers/media/rc/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * standard imon remote key table, which isn't really entirely
diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
index 1f59e16..34540df 100644
--- a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* IO-DATA BCTV7E Remote */
 
diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
index f31dc5c..4264a78 100644
--- a/drivers/media/rc/keymaps/rc-kaiomy.c
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Kaiomy TVnPC U2
    Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index 7f33edb..e48cd26 100644
--- a/drivers/media/rc/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Kworld 315U
  */
diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index 7fa17a3..32998d6 100644
--- a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Kworld Plus TV Analog Lite PCI IR
    Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
index 8faa54f..03d762d 100644
--- a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table leadtek_y04g0051[] = {
 	{ 0x0300, KEY_POWER2 },
diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index e8e23e2..fbf08fa 100644
--- a/drivers/media/rc/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-core.h>
+#include <linux/module.h>
 
 static struct rc_map_table lirc[] = {
 	{ },
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 129d3f9..51f18bb 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 
 static struct rc_map_table lme2510_rc[] = {
diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
index 23b2d04..e7038bb 100644
--- a/drivers/media/rc/keymaps/rc-manli.c
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Michael Tokarev <mjt@tls.msk.ru>
    keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index 7b9a01b..c64e9e3 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table msi_digivox_ii[] = {
 	{ 0x0002, KEY_2 },
diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
index ae9d06b..303a0b7 100644
--- a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* MSI DIGIVOX mini III */
 /* Uses NEC extended 0x61d6. */
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index 8e9969d..c393d8a 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
   Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index fdd213f..a7003d3 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* MSI TV@nywhere MASTER remote */
 
diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index ddae20e..3f0ddd7 100644
--- a/drivers/media/rc/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table nebula[] = {
 	{ 0x00, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
index 26f114c..f3b86c8 100644
--- a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Terratec Cinergy Hybrid T USB XS FM
    Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index f9f2fa2..9e65f07 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Norwood Micro (non-Pro) TV Tuner
    By Peter Naulls <peter@chocky.org>
diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
index 4aa588b..65d0cfc 100644
--- a/drivers/media/rc/keymaps/rc-npgtech.c
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table npgtech[] = {
 	{ 0x1d, KEY_SWITCHVIDEOMODE },	/* switch inputs */
diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index 7cdef6e..bf2cbdf 100644
--- a/drivers/media/rc/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Mapping for the 28 key remote control as seen at
    http://www.sednacomputer.com/photo/cardbus-tv.jpg
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
index 23b8c50..b46cd8f 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-color.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table pinnacle_color[] = {
 	{ 0x59, KEY_MUTE },
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
index 6ba8c36..d525df9 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-grey.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table pinnacle_grey[] = {
 	{ 0x3a, KEY_0 },
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index 31fc64cd..a4603d0 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Pinnacle PCTV HD 800i mini remote */
 
diff --git a/drivers/media/rc/keymaps/rc-pixelview-002t.c b/drivers/media/rc/keymaps/rc-pixelview-002t.c
index e5ab071..33eb643 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-002t.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-002t.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Keytable for 002-T IR remote provided together with Pixelview
diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 125fc39..21f4dd2 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Keytable for MK-F12 IR remote provided together with Pixelview
diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index bd78d6a..f944ad2 100644
--- a/drivers/media/rc/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
    Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 06187e7..a6020ee 100644
--- a/drivers/media/rc/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table pixelview[] = {
 
diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
index 5f9d546..e74c571 100644
--- a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Remote control for Powercolor Real Angel 330
diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
index 8a3a643..adee803 100644
--- a/drivers/media/rc/keymaps/rc-proteus-2309.c
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Michal Majchrowicz <mmajchrowicz@gmail.com> */
 
diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
index ef90296..722597a 100644
--- a/drivers/media/rc/keymaps/rc-purpletv.c
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table purpletv[] = {
 	{ 0x03, KEY_POWER },
diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index 5e8beee..0105d63 100644
--- a/drivers/media/rc/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Mark Phalan <phalanm@o2.ie> */
 
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index c3907e2..753e43e 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -13,6 +13,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table rc6_mce[] = {
 
diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index 6813d11..073694d 100644
--- a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Zogis Real Audio 220 - 32 keys IR */
 
diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
index 92cc10d..f9a0757 100644
--- a/drivers/media/rc/keymaps/rc-streamzap.c
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -10,6 +10,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table streamzap[] = {
 /*
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
index 7242ee6..5039be7 100644
--- a/drivers/media/rc/keymaps/rc-tbs-nec.c
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table tbs_nec[] = {
 	{ 0x84, KEY_POWER2},		/* power */
diff --git a/drivers/media/rc/keymaps/rc-technisat-usb2.c b/drivers/media/rc/keymaps/rc-technisat-usb2.c
index 4afe577..f9733bb 100644
--- a/drivers/media/rc/keymaps/rc-technisat-usb2.c
+++ b/drivers/media/rc/keymaps/rc-technisat-usb2.c
@@ -30,6 +30,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table technisat_usb2[] = {
 	{0x0a0c, KEY_POWER},
diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
index bc38e34..53629fb 100644
--- a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Terratec Cinergy Hybrid T USB XS
    Devin Heitmueller <dheitmueller@linuxtv.org>
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim-2.c b/drivers/media/rc/keymaps/rc-terratec-slim-2.c
index 4409391..4c149ef 100644
--- a/drivers/media/rc/keymaps/rc-terratec-slim-2.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim-2.c
@@ -20,6 +20,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * TerraTec slim remote, 6 rows, 3 columns.
diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
index 1abafa5..3d8a19c 100644
--- a/drivers/media/rc/keymaps/rc-terratec-slim.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* TerraTec slim remote, 7 rows, 4 columns. */
 /* Uses NEC extended 0x02bd. */
diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
index ef5ba3f..f2c3b75 100644
--- a/drivers/media/rc/keymaps/rc-tevii-nec.c
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table tevii_nec[] = {
 	{ 0x0a, KEY_POWER2},
diff --git a/drivers/media/rc/keymaps/rc-tivo.c b/drivers/media/rc/keymaps/rc-tivo.c
index 98ad085..454e062 100644
--- a/drivers/media/rc/keymaps/rc-tivo.c
+++ b/drivers/media/rc/keymaps/rc-tivo.c
@@ -9,6 +9,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /*
  * Initial mapping is for the TiVo remote included in the Nero LiquidTV bundle,
diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
index 20ac4e1..5b9f9ec 100644
--- a/drivers/media/rc/keymaps/rc-total-media-in-hand.c
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Uses NEC extended 0x02bd */
 static struct rc_map_table total_media_in_hand[] = {
diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
index f8190ea..f9a2e0f 100644
--- a/drivers/media/rc/keymaps/rc-trekstor.c
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -19,6 +19,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* TrekStor DVB-T USB Stick remote controller. */
 /* Imported from af9015.h.
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
index 295f373..caeff85 100644
--- a/drivers/media/rc/keymaps/rc-tt-1500.c
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* for the Technotrend 1500 bundled remotes (grey and black): */
 
diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
index 8bf8df6..509299b 100644
--- a/drivers/media/rc/keymaps/rc-twinhan1027.c
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -1,4 +1,5 @@
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table twinhan_vp1027[] = {
 	{ 0x16, KEY_POWER2 },
diff --git a/drivers/media/rc/keymaps/rc-videomate-m1f.c b/drivers/media/rc/keymaps/rc-videomate-m1f.c
index 4994d40..3bd1de1 100644
--- a/drivers/media/rc/keymaps/rc-videomate-m1f.c
+++ b/drivers/media/rc/keymaps/rc-videomate-m1f.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table videomate_m1f[] = {
 	{ 0x01, KEY_POWER },
diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
index 9e474a6..8bfc3e8 100644
--- a/drivers/media/rc/keymaps/rc-videomate-s350.c
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table videomate_s350[] = {
 	{ 0x00, KEY_TV},
diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
index 5f2a46e..390ce94 100644
--- a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 static struct rc_map_table videomate_tv_pvr[] = {
 	{ 0x14, KEY_MUTE },
diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
index bd8d021..2852bf7 100644
--- a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Leadtek Winfast TV USB II Deluxe remote
    Magnus Alm <magnus.alm@gmail.com>
diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index d8a34c1..2df1cba 100644
--- a/drivers/media/rc/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -11,6 +11,7 @@
  */
 
 #include <media/rc-map.h>
+#include <linux/module.h>
 
 /* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
 
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 666d4bb..29f9000 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -18,6 +18,7 @@
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include "rc-core-priv.h"
 
 /* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d285c8c..b303a3f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -517,6 +517,13 @@
 
 source "drivers/media/video/m5mols/Kconfig"
 
+config VIDEO_S5K6AA
+	tristate "Samsung S5K6AAFX sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
+	  camera sensor with an embedded SoC image signal processor.
+
 comment "Flash devices"
 
 config VIDEO_ADP1653
@@ -736,6 +743,8 @@
 
 source "drivers/media/video/cx23885/Kconfig"
 
+source "drivers/media/video/cx25821/Kconfig"
+
 source "drivers/media/video/au0828/Kconfig"
 
 source "drivers/media/video/ivtv/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 11fff97..117f9c4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -72,6 +72,7 @@
 obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
+obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
 obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
@@ -104,6 +105,7 @@
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
 obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
+obj-$(CONFIG_VIDEO_CX25821) += cx25821/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
index 5914390..12eedf4 100644
--- a/drivers/media/video/adp1653.c
+++ b/drivers/media/video/adp1653.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
index b388654..53c496c 100644
--- a/drivers/media/video/ak881x.c
+++ b/drivers/media/video/ak881x.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/ak881x.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
index 774715d..8c775c5 100644
--- a/drivers/media/video/atmel-isi.c
+++ b/drivers/media/video/atmel-isi.c
@@ -94,6 +94,7 @@
 	unsigned int			irq;
 
 	struct isi_platform_data	*pdata;
+	u16				width_flags;	/* max 12 bits */
 
 	struct list_head		video_buffer_list;
 	struct frame_buffer		*active;
@@ -248,9 +249,9 @@
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
@@ -647,50 +648,42 @@
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static unsigned long make_bus_param(struct atmel_isi *isi)
-{
-	unsigned long flags;
-	/*
-	 * Platform specified synchronization and pixel clock polarities are
-	 * only a recommendation and are only used during probing. Atmel ISI
-	 * camera interface only works in master mode, i.e., uses HSYNC and
-	 * VSYNC signals from the sensor
-	 */
-	flags = SOCAM_MASTER |
-		SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10)
-		flags |= SOCAM_DATAWIDTH_10;
-
-	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8)
-		flags |= SOCAM_DATAWIDTH_8;
-
-	if (flags & SOCAM_DATAWIDTH_MASK)
-		return flags;
-
-	return 0;
-}
+#define ISI_BUS_PARAM (V4L2_MBUS_MASTER |	\
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH |	\
+		V4L2_MBUS_HSYNC_ACTIVE_LOW |	\
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH |	\
+		V4L2_MBUS_VSYNC_ACTIVE_LOW |	\
+		V4L2_MBUS_PCLK_SAMPLE_RISING |	\
+		V4L2_MBUS_PCLK_SAMPLE_FALLING |	\
+		V4L2_MBUS_DATA_ACTIVE_HIGH)
 
 static int isi_camera_try_bus_param(struct soc_camera_device *icd,
 				    unsigned char buswidth)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct atmel_isi *isi = ici->priv;
-	unsigned long camera_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long common_flags;
 	int ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-	ret = soc_camera_bus_param_compatible(camera_flags,
-					make_bus_param(isi));
-	if (!ret)
-		return -EINVAL;
-	return 0;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  ISI_BUS_PARAM);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%x\n",
+				 cfg.flags, ISI_BUS_PARAM);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	}
+
+	if ((1 << (buswidth - 1)) & isi->width_flags)
+		return 0;
+	return -EINVAL;
 }
 
 
@@ -812,59 +805,71 @@
 
 static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct atmel_isi *isi = ici->priv;
-	unsigned long bus_flags, camera_flags, common_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long common_flags;
 	int ret;
 	u32 cfg1 = 0;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	bus_flags = make_bus_param(isi);
-	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
-		camera_flags, bus_flags, common_flags);
-	if (!common_flags)
-		return -EINVAL;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  ISI_BUS_PARAM);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%x\n",
+				 cfg.flags, ISI_BUS_PARAM);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	} else {
+		common_flags = ISI_BUS_PARAM;
+	}
+	dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n",
+		cfg.flags, ISI_BUS_PARAM, common_flags);
 
 	/* Make choises, based on platform preferences */
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
 		if (isi->pdata->hsync_act_low)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 		if (isi->pdata->vsync_act_low)
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
 		if (isi->pdata->pclk_act_falling)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
 		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
 	}
 
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0) {
-		dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n",
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
 			common_flags, ret);
 		return ret;
 	}
 
 	/* set bus param for ISI */
-	if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
 		cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
-	if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
 		cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
-	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
 		cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
 
 	if (isi->pdata->has_emb_sync)
@@ -983,6 +988,11 @@
 		goto err_ioremap;
 	}
 
+	if (pdata->data_width_flags & ISI_DATAWIDTH_8)
+		isi->width_flags = 1 << 7;
+	if (pdata->data_width_flags & ISI_DATAWIDTH_10)
+		isi->width_flags |= 1 << 9;
+
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 
 	irq = platform_get_irq(pdev, 0);
diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c
index dc5b07a..59c797c 100644
--- a/drivers/media/video/cpia2/cpia2_usb.c
+++ b/drivers/media/video/cpia2/cpia2_usb.c
@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 
 #include "cpia2.h"
 
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 9e2f870..c6ff32a 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -1085,6 +1085,8 @@
 		setup.addr = ADDR_UNSET;
 		setup.type = cx->options.tuner;
 		setup.mode_mask = T_ANALOG_TV;  /* matches TV tuners */
+		if (cx->options.radio > 0)
+			setup.mode_mask |= T_RADIO;
 		setup.tuner_callback = (setup.type == TUNER_XC2028) ?
 			cx18_reset_tuner_gpio : NULL;
 		cx18_call_all(cx, tuner, s_type_addr, &setup);
diff --git a/drivers/staging/cx25821/Kconfig b/drivers/media/video/cx25821/Kconfig
similarity index 100%
rename from drivers/staging/cx25821/Kconfig
rename to drivers/media/video/cx25821/Kconfig
diff --git a/drivers/staging/cx25821/Makefile b/drivers/media/video/cx25821/Makefile
similarity index 100%
rename from drivers/staging/cx25821/Makefile
rename to drivers/media/video/cx25821/Makefile
diff --git a/drivers/staging/cx25821/cx25821-alsa.c b/drivers/media/video/cx25821/cx25821-alsa.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-alsa.c
rename to drivers/media/video/cx25821/cx25821-alsa.c
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.c b/drivers/media/video/cx25821/cx25821-audio-upstream.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio-upstream.c
rename to drivers/media/video/cx25821/cx25821-audio-upstream.c
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.h b/drivers/media/video/cx25821/cx25821-audio-upstream.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio-upstream.h
rename to drivers/media/video/cx25821/cx25821-audio-upstream.h
diff --git a/drivers/staging/cx25821/cx25821-audio.h b/drivers/media/video/cx25821/cx25821-audio.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio.h
rename to drivers/media/video/cx25821/cx25821-audio.h
diff --git a/drivers/staging/cx25821/cx25821-biffuncs.h b/drivers/media/video/cx25821/cx25821-biffuncs.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-biffuncs.h
rename to drivers/media/video/cx25821/cx25821-biffuncs.h
diff --git a/drivers/staging/cx25821/cx25821-cards.c b/drivers/media/video/cx25821/cx25821-cards.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-cards.c
rename to drivers/media/video/cx25821/cx25821-cards.c
diff --git a/drivers/staging/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-core.c
rename to drivers/media/video/cx25821/cx25821-core.c
diff --git a/drivers/staging/cx25821/cx25821-gpio.c b/drivers/media/video/cx25821/cx25821-gpio.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-gpio.c
rename to drivers/media/video/cx25821/cx25821-gpio.c
diff --git a/drivers/staging/cx25821/cx25821-i2c.c b/drivers/media/video/cx25821/cx25821-i2c.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-i2c.c
rename to drivers/media/video/cx25821/cx25821-i2c.c
diff --git a/drivers/staging/cx25821/cx25821-medusa-defines.h b/drivers/media/video/cx25821/cx25821-medusa-defines.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-defines.h
rename to drivers/media/video/cx25821/cx25821-medusa-defines.h
diff --git a/drivers/staging/cx25821/cx25821-medusa-reg.h b/drivers/media/video/cx25821/cx25821-medusa-reg.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-reg.h
rename to drivers/media/video/cx25821/cx25821-medusa-reg.h
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/media/video/cx25821/cx25821-medusa-video.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-video.c
rename to drivers/media/video/cx25821/cx25821-medusa-video.c
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.h b/drivers/media/video/cx25821/cx25821-medusa-video.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-video.h
rename to drivers/media/video/cx25821/cx25821-medusa-video.h
diff --git a/drivers/staging/cx25821/cx25821-reg.h b/drivers/media/video/cx25821/cx25821-reg.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-reg.h
rename to drivers/media/video/cx25821/cx25821-reg.h
diff --git a/drivers/staging/cx25821/cx25821-sram.h b/drivers/media/video/cx25821/cx25821-sram.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-sram.h
rename to drivers/media/video/cx25821/cx25821-sram.h
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c b/drivers/media/video/cx25821/cx25821-video-upstream-ch2.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream-ch2.c
rename to drivers/media/video/cx25821/cx25821-video-upstream-ch2.c
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.h b/drivers/media/video/cx25821/cx25821-video-upstream-ch2.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream-ch2.h
rename to drivers/media/video/cx25821/cx25821-video-upstream-ch2.h
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.c b/drivers/media/video/cx25821/cx25821-video-upstream.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream.c
rename to drivers/media/video/cx25821/cx25821-video-upstream.c
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.h b/drivers/media/video/cx25821/cx25821-video-upstream.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream.h
rename to drivers/media/video/cx25821/cx25821-video-upstream.h
diff --git a/drivers/staging/cx25821/cx25821-video.c b/drivers/media/video/cx25821/cx25821-video.c
similarity index 99%
rename from drivers/staging/cx25821/cx25821-video.c
rename to drivers/media/video/cx25821/cx25821-video.c
index 084fc08..4d6907c 100644
--- a/drivers/staging/cx25821/cx25821-video.c
+++ b/drivers/media/video/cx25821/cx25821-video.c
@@ -1312,7 +1312,7 @@
 			return err;
 	}
 
-	if (i > 2) {
+	if (i >= CX25821_NR_INPUT) {
 		dprintk(1, "%s(): -EINVAL\n", __func__);
 		return -EINVAL;
 	}
diff --git a/drivers/staging/cx25821/cx25821-video.h b/drivers/media/video/cx25821/cx25821-video.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video.h
rename to drivers/media/video/cx25821/cx25821-video.h
diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/media/video/cx25821/cx25821.h
similarity index 99%
rename from drivers/staging/cx25821/cx25821.h
rename to drivers/media/video/cx25821/cx25821.h
index db2615b..2d2d009 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/media/video/cx25821/cx25821.h
@@ -98,6 +98,7 @@
 #define CX25821_BOARD_CONEXANT_ATHENA10 1
 #define MAX_VID_CHANNEL_NUM     12
 #define VID_CHANNEL_NUM 8
+#define CX25821_NR_INPUT 2
 
 struct cx25821_fmt {
 	char *name;
@@ -196,7 +197,7 @@
 	unsigned char radio_addr;
 
 	u32 clk_freq;
-	struct cx25821_input input[2];
+	struct cx25821_input input[CX25821_NR_INPUT];
 };
 
 struct cx25821_subid {
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index b718a3a..13c380e 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -23,6 +23,7 @@
 
 #include <linux/slab.h>
 #include <linux/kfifo.h>
+#include <linux/module.h>
 #include <media/cx25840.h>
 #include <media/rc-core.h>
 
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
index c29ac88..bd443ee 100644
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -39,6 +39,7 @@
 #include <linux/videodev2.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 
 #include <media/davinci/dm355_ccdc.h>
 #include <media/davinci/vpss.h>
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index c8b32c1..8051c29 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -40,6 +40,7 @@
 #include <linux/gfp.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 
 #include <media/davinci/dm644x_ccdc.h>
 #include <media/davinci/vpss.h>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4240f0b..9b747c2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1923,6 +1923,8 @@
 			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
 	{ USB_DEVICE(0x0ccd, 0x0096),
 			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
+	{ USB_DEVICE(0x0ccd, 0x10AF),
+			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
 	{ USB_DEVICE(0x0fd9, 0x0033),
 			.driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
 	{ USB_DEVICE(0x185b, 0x2870),
diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c
index 2a1ac28..82e819f 100644
--- a/drivers/media/video/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/video/hdpvr/hdpvr-i2c.c
@@ -17,6 +17,7 @@
 
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "hdpvr.h"
 
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 9cb039e..a62322d 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -26,6 +26,7 @@
 #define DEBUG_VARIABLE debug
 
 #include <media/saa7146_vv.h>
+#include <linux/module.h>
 
 static int debug;
 module_param(debug, int, 0);
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 74861a4..23debc9 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -26,6 +26,7 @@
 #define DEBUG_VARIABLE debug
 
 #include <media/saa7146_vv.h>
+#include <linux/module.h>
 
 static int debug;
 module_param(debug, int, 0);
diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 0382ea7..eec75bb 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -12,11 +12,12 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
 
@@ -267,6 +268,17 @@
 	return 0;
 }
 
+static int imx074_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	cfg->type = V4L2_MBUS_CSI2;
+	cfg->flags = V4L2_MBUS_CSI2_2_LANE |
+		V4L2_MBUS_CSI2_CHANNEL_0 |
+		V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops imx074_subdev_video_ops = {
 	.s_stream	= imx074_s_stream,
 	.s_mbus_fmt	= imx074_s_fmt,
@@ -275,6 +287,7 @@
 	.enum_mbus_fmt	= imx074_enum_fmt,
 	.g_crop		= imx074_g_crop,
 	.cropcap	= imx074_cropcap,
+	.g_mbus_config	= imx074_g_mbus_config,
 };
 
 static struct v4l2_subdev_core_ops imx074_subdev_core_ops = {
@@ -286,28 +299,7 @@
 	.video	= &imx074_subdev_video_ops,
 };
 
-/*
- * We have to provide soc-camera operations, but we don't have anything to say
- * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
- */
-static unsigned long imx074_query_bus_param(struct soc_camera_device *icd)
-{
-	return 0;
-}
-
-static int imx074_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	return -EINVAL;
-}
-
-static struct soc_camera_ops imx074_ops = {
-	.query_bus_param	= imx074_query_bus_param,
-	.set_bus_param		= imx074_set_bus_param,
-};
-
-static int imx074_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int imx074_video_probe(struct i2c_client *client)
 {
 	int ret;
 	u16 id;
@@ -417,17 +409,10 @@
 			const struct i2c_device_id *did)
 {
 	struct imx074 *priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "IMX074: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "IMX074: missing platform data!\n");
 		return -EINVAL;
@@ -445,12 +430,10 @@
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &imx074_subdev_ops);
 
-	icd->ops	= &imx074_ops;
 	priv->fmt	= &imx074_colour_fmts[0];
 
-	ret = imx074_video_probe(icd, client);
+	ret = imx074_video_probe(client);
 	if (ret < 0) {
-		icd->ops = NULL;
 		kfree(priv);
 		return ret;
 	}
@@ -461,10 +444,8 @@
 static int imx074_remove(struct i2c_client *client)
 {
 	struct imx074 *priv = to_imx074(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
 	kfree(priv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 0fb7552..41108a9a 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1180,6 +1180,8 @@
 		setup.addr = ADDR_UNSET;
 		setup.type = itv->options.tuner;
 		setup.mode_mask = T_ANALOG_TV;  /* matches TV tuners */
+		if (itv->options.radio > 0)
+			setup.mode_mask |= T_RADIO;
 		setup.tuner_callback = (setup.type == TUNER_XC2028) ?
 			ivtv_reset_tuner_gpio : NULL;
 		ivtv_call_all(itv, tuner, s_type_addr, &setup);
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 5d21d05..05ab370 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c
index 1141b97..80ec64d 100644
--- a/drivers/media/video/marvell-ccic/mcam-core.c
+++ b/drivers/media/video/marvell-ccic/mcam-core.c
@@ -883,7 +883,8 @@
  * Videobuf2 interface code.
  */
 
-static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs,
+static int mcam_vb_queue_setup(struct vb2_queue *vq,
+		const struct v4l2_format *fmt, unsigned int *nbufs,
 		unsigned int *num_planes, unsigned int sizes[],
 		void *alloc_ctxs[])
 {
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 9594b52..12897e8 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -738,9 +738,10 @@
  * Queue operations
  */
 
-static int m2mtest_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				void *alloc_ctxs[])
+static int m2mtest_queue_setup(struct vb2_queue *vq,
+				const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct m2mtest_ctx *ctx = vb2_get_drv_priv(vq);
 	struct m2mtest_q_data *q_data;
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 4da9cca..e2b1029 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -12,10 +12,13 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/log2.h>
+#include <linux/module.h>
 
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 
 /*
  * mt9m001 i2c address 0x5d
@@ -84,15 +87,19 @@
 
 struct mt9m001 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* exposure/auto-exposure cluster */
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
 	struct v4l2_rect rect;	/* Sensor window */
 	const struct mt9m001_datafmt *fmt;
 	const struct mt9m001_datafmt *fmts;
 	int num_fmts;
 	int model;	/* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
-	unsigned int gain;
-	unsigned int exposure;
+	unsigned int total_h;
 	unsigned short y_skip_top;	/* Lines to skip at the top */
-	unsigned char autoexposure;
 };
 
 static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
@@ -165,54 +172,13 @@
 	return 0;
 }
 
-static int mt9m001_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
-	/* Only one width bit may be set */
-	if (!is_power_of_2(width_flag))
-		return -EINVAL;
-
-	if (icl->set_bus_param)
-		return icl->set_bus_param(icl, width_flag);
-
-	/*
-	 * Without board specific bus width settings we only support the
-	 * sensors native bus width
-	 */
-	if (width_flag == SOCAM_DATAWIDTH_10)
-		return 0;
-
-	return -EINVAL;
-}
-
-static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	/* MT9M001 has all capture_format parameters fixed */
-	unsigned long flags = SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER;
-
-	if (icl->query_bus_param)
-		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
 	struct v4l2_rect rect = a->c;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 	const u16 hblank = 9, vblank = 25;
-	unsigned int total_h;
 
 	if (mt9m001->fmts == mt9m001_colour_fmts)
 		/*
@@ -231,7 +197,7 @@
 	soc_camera_limit_side(&rect.top, &rect.height,
 		     MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
 
-	total_h = rect.height + mt9m001->y_skip_top + vblank;
+	mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank;
 
 	/* Blanking and start values - default... */
 	ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
@@ -240,7 +206,7 @@
 
 	/*
 	 * The caller provides a supported format, as verified per
-	 * call to icd->try_fmt()
+	 * call to .try_mbus_fmt()
 	 */
 	if (!ret)
 		ret = reg_write(client, MT9M001_COLUMN_START, rect.left);
@@ -251,17 +217,8 @@
 	if (!ret)
 		ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
 				rect.height + mt9m001->y_skip_top - 1);
-	if (!ret && mt9m001->autoexposure) {
-		ret = reg_write(client, MT9M001_SHUTTER_WIDTH, total_h);
-		if (!ret) {
-			const struct v4l2_queryctrl *qctrl =
-				soc_camera_find_qctrl(icd->ops,
-						      V4L2_CID_EXPOSURE);
-			mt9m001->exposure = (524 + (total_h - 1) *
-				 (qctrl->maximum - qctrl->minimum)) /
-				1048 + qctrl->minimum;
-		}
-	}
+	if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO)
+		ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h);
 
 	if (!ret)
 		mt9m001->rect = rect;
@@ -421,107 +378,48 @@
 }
 #endif
 
-static const struct v4l2_queryctrl mt9m001_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= 1,
-		.maximum	= 255,
-		.step		= 1,
-		.default_value	= 255,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}
-};
-
-static struct soc_camera_ops mt9m001_ops = {
-	.set_bus_param		= mt9m001_set_bus_param,
-	.query_bus_param	= mt9m001_query_bus_param,
-	.controls		= mt9m001_controls,
-	.num_controls		= ARRAY_SIZE(mt9m001_controls),
-};
-
-static int mt9m001_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	int data;
+	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
+					       struct mt9m001, hdl);
+	s32 min, max;
 
 	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		data = reg_read(client, MT9M001_READ_OPTIONS2);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x8000);
-		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = mt9m001->autoexposure;
-		break;
-	case V4L2_CID_GAIN:
-		ctrl->value = mt9m001->gain;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = mt9m001->exposure;
+		min = mt9m001->exposure->minimum;
+		max = mt9m001->exposure->maximum;
+		mt9m001->exposure->val =
+			(524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
 		break;
 	}
 	return 0;
 }
 
-static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
+					       struct mt9m001, hdl);
+	struct v4l2_subdev *sd = &mt9m001->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
-	const struct v4l2_queryctrl *qctrl;
+	struct v4l2_ctrl *exp = mt9m001->exposure;
 	int data;
 
-	qctrl = soc_camera_find_qctrl(&mt9m001_ops, ctrl->id);
-
-	if (!qctrl)
-		return -EINVAL;
-
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
 		else
 			data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
+
 	case V4L2_CID_GAIN:
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
 		/* See Datasheet Table 7, Gain settings. */
-		if (ctrl->value <= qctrl->default_value) {
+		if (ctrl->val <= ctrl->default_value) {
 			/* Pack it into 0..1 step 0.125, register values 0..8 */
-			unsigned long range = qctrl->default_value - qctrl->minimum;
-			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
+			unsigned long range = ctrl->default_value - ctrl->minimum;
+			data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range;
 
 			dev_dbg(&client->dev, "Setting gain %d\n", data);
 			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
@@ -530,8 +428,8 @@
 		} else {
 			/* Pack it into 1.125..15 variable step, register values 9..67 */
 			/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
-			unsigned long range = qctrl->maximum - qctrl->default_value - 1;
-			unsigned long gain = ((ctrl->value - qctrl->default_value - 1) *
+			unsigned long range = ctrl->maximum - ctrl->default_value - 1;
+			unsigned long gain = ((ctrl->val - ctrl->default_value - 1) *
 					       111 + range / 2) / range + 9;
 
 			if (gain <= 32)
@@ -547,66 +445,44 @@
 			if (data < 0)
 				return -EIO;
 		}
+		return 0;
 
-		/* Success */
-		mt9m001->gain = ctrl->value;
-		break;
-	case V4L2_CID_EXPOSURE:
-		/* mt9m001 has maximum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			unsigned long range = qctrl->maximum - qctrl->minimum;
-			unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 +
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
+			unsigned long range = exp->maximum - exp->minimum;
+			unsigned long shutter = ((exp->val - exp->minimum) * 1048 +
 						 range / 2) / range + 1;
 
 			dev_dbg(&client->dev,
 				"Setting shutter width from %d to %lu\n",
-				reg_read(client, MT9M001_SHUTTER_WIDTH),
-				shutter);
+				reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
 			if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
 				return -EIO;
-			mt9m001->exposure = ctrl->value;
-			mt9m001->autoexposure = 0;
-		}
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->value) {
+		} else {
 			const u16 vblank = 25;
-			unsigned int total_h = mt9m001->rect.height +
+
+			mt9m001->total_h = mt9m001->rect.height +
 				mt9m001->y_skip_top + vblank;
-			if (reg_write(client, MT9M001_SHUTTER_WIDTH,
-				      total_h) < 0)
+			if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0)
 				return -EIO;
-			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			mt9m001->exposure = (524 + (total_h - 1) *
-				 (qctrl->maximum - qctrl->minimum)) /
-				1048 + qctrl->minimum;
-			mt9m001->autoexposure = 1;
-		} else
-			mt9m001->autoexposure = 0;
-		break;
+		}
+		return 0;
 	}
-	return 0;
+	return -EINVAL;
 }
 
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int mt9m001_video_probe(struct soc_camera_device *icd,
+static int mt9m001_video_probe(struct soc_camera_link *icl,
 			       struct i2c_client *client)
 {
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
 	unsigned long flags;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
 	dev_dbg(&client->dev, "write: %d\n", data);
@@ -661,18 +537,11 @@
 		dev_err(&client->dev, "Failed to initialise the camera\n");
 
 	/* mt9m001_init() has reset the chip, returning registers to defaults */
-	mt9m001->gain = 64;
-	mt9m001->exposure = 255;
-
-	return ret;
+	return v4l2_ctrl_handler_setup(&mt9m001->hdl);
 }
 
-static void mt9m001_video_remove(struct soc_camera_device *icd)
+static void mt9m001_video_remove(struct soc_camera_link *icl)
 {
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
-		icd->parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
@@ -687,9 +556,12 @@
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
+	.g_volatile_ctrl = mt9m001_g_volatile_ctrl,
+	.s_ctrl = mt9m001_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
-	.g_ctrl		= mt9m001_g_ctrl,
-	.s_ctrl		= mt9m001_s_ctrl,
 	.g_chip_ident	= mt9m001_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9m001_g_register,
@@ -710,6 +582,40 @@
 	return 0;
 }
 
+static int mt9m001_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	/* MT9M001 has all capture_format parameters fixed */
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9m001_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	const struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample;
+
+	if (icl->set_bus_param)
+		return icl->set_bus_param(icl, 1 << (bps - 1));
+
+	/*
+	 * Without board specific bus width settings we only support the
+	 * sensors native bus width
+	 */
+	return bps == 10 ? 0 : -EINVAL;
+}
+
 static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
 	.s_stream	= mt9m001_s_stream,
 	.s_mbus_fmt	= mt9m001_s_fmt,
@@ -719,6 +625,8 @@
 	.g_crop		= mt9m001_g_crop,
 	.cropcap	= mt9m001_cropcap,
 	.enum_mbus_fmt	= mt9m001_enum_fmt,
+	.g_mbus_config	= mt9m001_g_mbus_config,
+	.s_mbus_config	= mt9m001_s_mbus_config,
 };
 
 static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
@@ -735,17 +643,10 @@
 			 const struct i2c_device_id *did)
 {
 	struct mt9m001 *mt9m001;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "MT9M001: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9M001 driver needs platform data\n");
 		return -EINVAL;
@@ -762,25 +663,40 @@
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
+	v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
+	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 64);
+	mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+	/*
+	 * Simulated autoexposure. If enabled, we calculate shutter width
+	 * ourselves in the driver based on vertical blanking and frame width
+	 */
+	mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
+			&mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+			V4L2_EXPOSURE_AUTO);
+	mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
+	if (mt9m001->hdl.error) {
+		int err = mt9m001->hdl.error;
+
+		kfree(mt9m001);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
+					V4L2_EXPOSURE_MANUAL, true);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd->ops		= &mt9m001_ops;
-
 	mt9m001->y_skip_top	= 0;
 	mt9m001->rect.left	= MT9M001_COLUMN_SKIP;
 	mt9m001->rect.top	= MT9M001_ROW_SKIP;
 	mt9m001->rect.width	= MT9M001_MAX_WIDTH;
 	mt9m001->rect.height	= MT9M001_MAX_HEIGHT;
 
-	/*
-	 * Simulated autoexposure. If enabled, we calculate shutter width
-	 * ourselves in the driver based on vertical blanking and frame width
-	 */
-	mt9m001->autoexposure = 1;
-
-	ret = mt9m001_video_probe(icd, client);
+	ret = mt9m001_video_probe(icl, client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&mt9m001->hdl);
 		kfree(mt9m001);
 	}
 
@@ -790,10 +706,11 @@
 static int mt9m001_remove(struct i2c_client *client)
 {
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
-	mt9m001_video_remove(icd);
+	v4l2_device_unregister_subdev(&mt9m001->subdev);
+	v4l2_ctrl_handler_free(&mt9m001->hdl);
+	mt9m001_video_remove(icl);
 	kfree(mt9m001);
 
 	return 0;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 07af26e..cf2c0fb 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -13,10 +13,13 @@
 #include <linux/log2.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
 
-#include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-chip-ident.h>
 
 /*
  * MT9M111, MT9M112 and MT9M131:
@@ -177,6 +180,8 @@
 
 struct mt9m111 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_ctrl *gain;
 	int model;	/* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code
 			 * from v4l2-chip-ident.h */
 	enum mt9m111_context context;
@@ -185,13 +190,8 @@
 	int power_count;
 	const struct mt9m111_datafmt *fmt;
 	int lastpage;	/* PageMap cache value */
-	unsigned int gain;
-	unsigned char autoexposure;
 	unsigned char datawidth;
 	unsigned int powered:1;
-	unsigned int hflip:1;
-	unsigned int vflip:1;
-	unsigned int autowhitebalance:1;
 };
 
 static struct mt9m111 *to_mt9m111(const struct i2c_client *client)
@@ -363,21 +363,6 @@
 	return ret;
 }
 
-static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_MASTER | SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
-{
-	return 0;
-}
-
 static int mt9m111_make_rect(struct mt9m111 *mt9m111,
 			     struct v4l2_rect *rect)
 {
@@ -660,50 +645,6 @@
 }
 #endif
 
-static const struct v4l2_queryctrl mt9m111_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Verticaly",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontaly",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {	/* gain = 1/32*val (=>gain=1 if val==32) */
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain",
-		.minimum	= 0,
-		.maximum	= 63 * 2 * 2,
-		.step		= 1,
-		.default_value	= 32,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Auto Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}
-};
-
-static struct soc_camera_ops mt9m111_ops = {
-	.query_bus_param	= mt9m111_query_bus_param,
-	.set_bus_param		= mt9m111_set_bus_param,
-	.controls		= mt9m111_controls,
-	.num_controls		= ARRAY_SIZE(mt9m111_controls),
-};
-
 static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
@@ -744,7 +685,6 @@
 	if (gain > 63 * 2 * 2)
 		return -EINVAL;
 
-	mt9m111->gain = gain;
 	if ((gain >= 64 * 2) && (gain < 63 * 2 * 2))
 		val = (1 << 10) | (1 << 9) | (gain / 4);
 	else if ((gain >= 64) && (gain < 64 * 2))
@@ -758,118 +698,47 @@
 static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int on)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
-	int ret;
 
 	if (on)
-		ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
-	else
-		ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
-
-	if (!ret)
-		mt9m111->autoexposure = on;
-
-	return ret;
+		return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
+	return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
 }
 
 static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
-	int ret;
 
 	if (on)
-		ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
-	else
-		ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
-
-	if (!ret)
-		mt9m111->autowhitebalance = on;
-
-	return ret;
+		return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
+	return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
 }
 
-static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
-	int data;
+	struct mt9m111 *mt9m111 = container_of(ctrl->handler,
+					       struct mt9m111, hdl);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		if (mt9m111->context == HIGHPOWER)
-			data = reg_read(READ_MODE_B);
-		else
-			data = reg_read(READ_MODE_A);
-
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & MT9M111_RMB_MIRROR_ROWS);
-		break;
-	case V4L2_CID_HFLIP:
-		if (mt9m111->context == HIGHPOWER)
-			data = reg_read(READ_MODE_B);
-		else
-			data = reg_read(READ_MODE_A);
-
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS);
-		break;
-	case V4L2_CID_GAIN:
-		data = mt9m111_get_global_gain(mt9m111);
-		if (data < 0)
-			return data;
-		ctrl->value = data;
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = mt9m111->autoexposure;
-		break;
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = mt9m111->autowhitebalance;
-		break;
-	}
-	return 0;
-}
-
-static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
-	const struct v4l2_queryctrl *qctrl;
-	int ret;
-
-	qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id);
-	if (!qctrl)
-		return -EINVAL;
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		mt9m111->vflip = ctrl->value;
-		ret = mt9m111_set_flip(mt9m111, ctrl->value,
+		return mt9m111_set_flip(mt9m111, ctrl->val,
 					MT9M111_RMB_MIRROR_ROWS);
-		break;
 	case V4L2_CID_HFLIP:
-		mt9m111->hflip = ctrl->value;
-		ret = mt9m111_set_flip(mt9m111, ctrl->value,
+		return mt9m111_set_flip(mt9m111, ctrl->val,
 					MT9M111_RMB_MIRROR_COLS);
-		break;
 	case V4L2_CID_GAIN:
-		ret = mt9m111_set_global_gain(mt9m111, ctrl->value);
-		break;
+		return mt9m111_set_global_gain(mt9m111, ctrl->val);
 	case V4L2_CID_EXPOSURE_AUTO:
-		ret =  mt9m111_set_autoexposure(mt9m111, ctrl->value);
-		break;
+		return mt9m111_set_autoexposure(mt9m111, ctrl->val);
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret =  mt9m111_set_autowhitebalance(mt9m111, ctrl->value);
-		break;
-	default:
-		ret = -EINVAL;
+		return mt9m111_set_autowhitebalance(mt9m111, ctrl->val);
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 static int mt9m111_suspend(struct mt9m111 *mt9m111)
 {
-	mt9m111->gain = mt9m111_get_global_gain(mt9m111);
+	v4l2_ctrl_s_ctrl(mt9m111->gain, mt9m111_get_global_gain(mt9m111));
 
 	return 0;
 }
@@ -879,11 +748,7 @@
 	mt9m111_set_context(mt9m111, mt9m111->context);
 	mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code);
 	mt9m111_setup_rect(mt9m111, &mt9m111->rect);
-	mt9m111_set_flip(mt9m111, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
-	mt9m111_set_flip(mt9m111, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
-	mt9m111_set_global_gain(mt9m111, mt9m111->gain);
-	mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
-	mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance);
+	v4l2_ctrl_handler_setup(&mt9m111->hdl);
 }
 
 static int mt9m111_resume(struct mt9m111 *mt9m111)
@@ -911,8 +776,6 @@
 		ret = mt9m111_reset(mt9m111);
 	if (!ret)
 		ret = mt9m111_set_context(mt9m111, mt9m111->context);
-	if (!ret)
-		ret = mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
 	if (ret)
 		dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
 	return ret;
@@ -922,22 +785,12 @@
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int mt9m111_video_probe(struct soc_camera_device *icd,
-			       struct i2c_client *client)
+static int mt9m111_video_probe(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	s32 data;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
-	mt9m111->lastpage = -1;
-
-	mt9m111->autoexposure = 1;
-	mt9m111->autowhitebalance = 1;
-
 	data = reg_read(CHIP_VERSION);
 
 	switch (data) {
@@ -951,17 +804,16 @@
 		dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
 		break;
 	default:
-		ret = -ENODEV;
 		dev_err(&client->dev,
 			"No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
 			data);
-		goto ei2c;
+		return -ENODEV;
 	}
 
 	ret = mt9m111_init(mt9m111);
-
-ei2c:
-	return ret;
+	if (ret)
+		return ret;
+	return v4l2_ctrl_handler_setup(&mt9m111->hdl);
 }
 
 static int mt9m111_s_power(struct v4l2_subdev *sd, int on)
@@ -998,9 +850,11 @@
 	return ret;
 }
 
+static const struct v4l2_ctrl_ops mt9m111_ctrl_ops = {
+	.s_ctrl = mt9m111_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
-	.g_ctrl		= mt9m111_g_ctrl,
-	.s_ctrl		= mt9m111_s_ctrl,
 	.g_chip_ident	= mt9m111_g_chip_ident,
 	.s_power	= mt9m111_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -1019,6 +873,21 @@
 	return 0;
 }
 
+static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = {
 	.s_mbus_fmt	= mt9m111_s_fmt,
 	.g_mbus_fmt	= mt9m111_g_fmt,
@@ -1027,6 +896,7 @@
 	.g_crop		= mt9m111_g_crop,
 	.cropcap	= mt9m111_cropcap,
 	.enum_mbus_fmt	= mt9m111_enum_fmt,
+	.g_mbus_config	= mt9m111_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops mt9m111_subdev_ops = {
@@ -1038,17 +908,10 @@
 			 const struct i2c_device_id *did)
 {
 	struct mt9m111 *mt9m111;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "mt9m111: soc-camera data missing!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "mt9m111: driver needs platform data\n");
 		return -EINVAL;
@@ -1065,19 +928,37 @@
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
+	v4l2_ctrl_handler_init(&mt9m111->hdl, 5);
+	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	mt9m111->gain = v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+			V4L2_CID_GAIN, 0, 63 * 2 * 2, 1, 32);
+	v4l2_ctrl_new_std_menu(&mt9m111->hdl,
+			&mt9m111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+			V4L2_EXPOSURE_AUTO);
+	mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
+	if (mt9m111->hdl.error) {
+		int err = mt9m111->hdl.error;
+
+		kfree(mt9m111);
+		return err;
+	}
 
 	/* Second stage probe - when a capture adapter is there */
-	icd->ops		= &mt9m111_ops;
-
 	mt9m111->rect.left	= MT9M111_MIN_DARK_COLS;
 	mt9m111->rect.top	= MT9M111_MIN_DARK_ROWS;
 	mt9m111->rect.width	= MT9M111_MAX_WIDTH;
 	mt9m111->rect.height	= MT9M111_MAX_HEIGHT;
 	mt9m111->fmt		= &mt9m111_colour_fmts[0];
+	mt9m111->lastpage	= -1;
 
-	ret = mt9m111_video_probe(icd, client);
+	ret = mt9m111_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&mt9m111->hdl);
 		kfree(mt9m111);
 	}
 
@@ -1087,9 +968,9 @@
 static int mt9m111_remove(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
+	v4l2_device_unregister_subdev(&mt9m111->subdev);
+	v4l2_ctrl_handler_free(&mt9m111->hdl);
 	kfree(mt9m111);
 
 	return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 30547cc..0e78477 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -13,11 +13,21 @@
 #include <linux/log2.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+
+/*
+ * ATTENTION: this driver still cannot be used outside of the soc-camera
+ * framework because of its PM implementation, using the video_device node.
+ * If hardware becomes available for testing, alternative PM approaches shall
+ * be considered and tested.
+ */
 
 /*
  * mt9t031 i2c address 0x5d
@@ -57,21 +67,20 @@
 #define MT9T031_COLUMN_SKIP		32
 #define MT9T031_ROW_SKIP		20
 
-#define MT9T031_BUS_PARAM	(SOCAM_PCLK_SAMPLE_RISING |	\
-	SOCAM_PCLK_SAMPLE_FALLING | SOCAM_HSYNC_ACTIVE_HIGH |	\
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH |	\
-	SOCAM_MASTER | SOCAM_DATAWIDTH_10)
-
 struct mt9t031 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* exposure/auto-exposure cluster */
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
 	struct v4l2_rect rect;	/* Sensor window */
 	int model;	/* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
 	u16 xskip;
 	u16 yskip;
-	unsigned int gain;
+	unsigned int total_h;
 	unsigned short y_skip_top;	/* Lines to skip at the top */
-	unsigned int exposure;
-	unsigned char autoexposure;
 };
 
 static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
@@ -179,95 +188,6 @@
 	return 0;
 }
 
-static int mt9t031_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
-	/* The caller should have queried our parameters, check anyway */
-	if (flags & ~MT9T031_BUS_PARAM)
-		return -EINVAL;
-
-	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
-		reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
-	else
-		reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
-
-	return 0;
-}
-
-static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	return soc_camera_apply_sensor_flags(icl, MT9T031_BUS_PARAM);
-}
-
-enum {
-	MT9T031_CTRL_VFLIP,
-	MT9T031_CTRL_HFLIP,
-	MT9T031_CTRL_GAIN,
-	MT9T031_CTRL_EXPOSURE,
-	MT9T031_CTRL_EXPOSURE_AUTO,
-};
-
-static const struct v4l2_queryctrl mt9t031_controls[] = {
-	[MT9T031_CTRL_VFLIP] = {
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	[MT9T031_CTRL_HFLIP] = {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	[MT9T031_CTRL_GAIN] = {
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	},
-	[MT9T031_CTRL_EXPOSURE] = {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= 1,
-		.maximum	= 255,
-		.step		= 1,
-		.default_value	= 255,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	},
-	[MT9T031_CTRL_EXPOSURE_AUTO] = {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}
-};
-
-static struct soc_camera_ops mt9t031_ops = {
-	.set_bus_param		= mt9t031_set_bus_param,
-	.query_bus_param	= mt9t031_query_bus_param,
-	.controls		= mt9t031_controls,
-	.num_controls		= ARRAY_SIZE(mt9t031_controls),
-};
-
 /* target must be _even_ */
 static u16 mt9t031_skip(s32 *source, s32 target, s32 max)
 {
@@ -353,7 +273,7 @@
 
 	/*
 	 * The caller provides a supported format, as guaranteed by
-	 * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap()
+	 * .try_mbus_fmt(), soc_camera_s_crop() and soc_camera_cropcap()
 	 */
 	if (ret >= 0)
 		ret = reg_write(client, MT9T031_COLUMN_START, rect->left);
@@ -364,17 +284,10 @@
 	if (ret >= 0)
 		ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
 				rect->height + mt9t031->y_skip_top - 1);
-	if (ret >= 0 && mt9t031->autoexposure) {
-		unsigned int total_h = rect->height + mt9t031->y_skip_top + vblank;
-		ret = set_shutter(client, total_h);
-		if (ret >= 0) {
-			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			const struct v4l2_queryctrl *qctrl =
-				&mt9t031_controls[MT9T031_CTRL_EXPOSURE];
-			mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
-				 (qctrl->maximum - qctrl->minimum)) /
-				shutter_max + qctrl->minimum;
-		}
+	if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) {
+		mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank;
+
+		ret = set_shutter(client, mt9t031->total_h);
 	}
 
 	/* Re-enable register update, commit all changes */
@@ -543,71 +456,57 @@
 }
 #endif
 
-static int mt9t031_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t031 *mt9t031 = to_mt9t031(client);
-	int data;
+	struct mt9t031 *mt9t031 = container_of(ctrl->handler,
+					       struct mt9t031, hdl);
+	const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK;
+	s32 min, max;
 
 	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		data = reg_read(client, MT9T031_READ_MODE_2);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x8000);
-		break;
-	case V4L2_CID_HFLIP:
-		data = reg_read(client, MT9T031_READ_MODE_2);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x4000);
-		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = mt9t031->autoexposure;
-		break;
-	case V4L2_CID_GAIN:
-		ctrl->value = mt9t031->gain;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = mt9t031->exposure;
+		min = mt9t031->exposure->minimum;
+		max = mt9t031->exposure->maximum;
+		mt9t031->exposure->val =
+			(shutter_max / 2 + (mt9t031->total_h - 1) * (max - min))
+				/ shutter_max + min;
 		break;
 	}
 	return 0;
 }
 
-static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct mt9t031 *mt9t031 = container_of(ctrl->handler,
+					       struct mt9t031, hdl);
+	struct v4l2_subdev *sd = &mt9t031->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t031 *mt9t031 = to_mt9t031(client);
-	const struct v4l2_queryctrl *qctrl;
+	struct v4l2_ctrl *exp = mt9t031->exposure;
 	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9T031_READ_MODE_2, 0x8000);
 		else
 			data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_HFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9T031_READ_MODE_2, 0x4000);
 		else
 			data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_GAIN:
-		qctrl = &mt9t031_controls[MT9T031_CTRL_GAIN];
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
 		/* See Datasheet Table 7, Gain settings. */
-		if (ctrl->value <= qctrl->default_value) {
+		if (ctrl->val <= ctrl->default_value) {
 			/* Pack it into 0..1 step 0.125, register values 0..8 */
-			unsigned long range = qctrl->default_value - qctrl->minimum;
-			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
+			unsigned long range = ctrl->default_value - ctrl->minimum;
+			data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range;
 
 			dev_dbg(&client->dev, "Setting gain %d\n", data);
 			data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
@@ -616,9 +515,9 @@
 		} else {
 			/* Pack it into 1.125..128 variable step, register values 9..0x7860 */
 			/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
-			unsigned long range = qctrl->maximum - qctrl->default_value - 1;
+			unsigned long range = ctrl->maximum - ctrl->default_value - 1;
 			/* calculated gain: map 65..127 to 9..1024 step 0.125 */
-			unsigned long gain = ((ctrl->value - qctrl->default_value - 1) *
+			unsigned long gain = ((ctrl->val - ctrl->default_value - 1) *
 					       1015 + range / 2) / range + 9;
 
 			if (gain <= 32)		/* calculated gain 9..32 -> 9..32 */
@@ -635,19 +534,13 @@
 			if (data < 0)
 				return -EIO;
 		}
+		return 0;
 
-		/* Success */
-		mt9t031->gain = ctrl->value;
-		break;
-	case V4L2_CID_EXPOSURE:
-		qctrl = &mt9t031_controls[MT9T031_CTRL_EXPOSURE];
-		/* mt9t031 has maximum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			const unsigned long range = qctrl->maximum - qctrl->minimum;
-			const u32 shutter = ((ctrl->value - qctrl->minimum) * 1048 +
-					     range / 2) / range + 1;
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
+			unsigned int range = exp->maximum - exp->minimum;
+			unsigned int shutter = ((exp->val - exp->minimum) * 1048 +
+						 range / 2) / range + 1;
 			u32 old;
 
 			get_shutter(client, &old);
@@ -655,27 +548,15 @@
 				old, shutter);
 			if (set_shutter(client, shutter) < 0)
 				return -EIO;
-			mt9t031->exposure = ctrl->value;
-			mt9t031->autoexposure = 0;
-		}
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->value) {
+		} else {
 			const u16 vblank = MT9T031_VERTICAL_BLANK;
-			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			unsigned int total_h = mt9t031->rect.height +
+			mt9t031->total_h = mt9t031->rect.height +
 				mt9t031->y_skip_top + vblank;
 
-			if (set_shutter(client, total_h) < 0)
+			if (set_shutter(client, mt9t031->total_h) < 0)
 				return -EIO;
-			qctrl = &mt9t031_controls[MT9T031_CTRL_EXPOSURE];
-			mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
-				 (qctrl->maximum - qctrl->minimum)) /
-				shutter_max + qctrl->minimum;
-			mt9t031->autoexposure = 1;
-		} else
-			mt9t031->autoexposure = 0;
-		break;
+		}
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -700,8 +581,7 @@
 static int mt9t031_runtime_resume(struct device *dev)
 {
 	struct video_device *vdev = to_video_device(dev);
-	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 
@@ -734,6 +614,19 @@
 	.pm	= &mt9t031_dev_pm_ops,
 };
 
+static int mt9t031_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct video_device *vdev = soc_camera_i2c_to_vdev(client);
+
+	if (on)
+		vdev->dev.type = &mt9t031_dev_type;
+	else
+		vdev->dev.type = NULL;
+
+	return 0;
+}
+
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
@@ -741,7 +634,6 @@
 static int mt9t031_video_probe(struct i2c_client *client)
 {
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
-	struct video_device *vdev = soc_camera_i2c_to_vdev(client);
 	s32 data;
 	int ret;
 
@@ -768,11 +660,7 @@
 	if (ret < 0)
 		dev_err(&client->dev, "Failed to initialise the camera\n");
 	else
-		vdev->dev.type = &mt9t031_dev_type;
-
-	/* mt9t031_idle() has reset the chip to default. */
-	mt9t031->exposure = 255;
-	mt9t031->gain = 64;
+		v4l2_ctrl_handler_setup(&mt9t031->hdl);
 
 	return ret;
 }
@@ -787,10 +675,14 @@
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = {
+	.g_volatile_ctrl = mt9t031_g_volatile_ctrl,
+	.s_ctrl = mt9t031_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
-	.g_ctrl		= mt9t031_g_ctrl,
-	.s_ctrl		= mt9t031_s_ctrl,
 	.g_chip_ident	= mt9t031_g_chip_ident,
+	.s_power	= mt9t031_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9t031_g_register,
 	.s_register	= mt9t031_s_register,
@@ -807,6 +699,34 @@
 	return 0;
 }
 
+static int mt9t031_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+		V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9t031_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	if (soc_camera_apply_board_flags(icl, cfg) &
+	    V4L2_MBUS_PCLK_SAMPLE_FALLING)
+		return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+	else
+		return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+}
+
 static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
 	.s_stream	= mt9t031_s_stream,
 	.s_mbus_fmt	= mt9t031_s_fmt,
@@ -816,6 +736,8 @@
 	.g_crop		= mt9t031_g_crop,
 	.cropcap	= mt9t031_cropcap,
 	.enum_mbus_fmt	= mt9t031_enum_fmt,
+	.g_mbus_config	= mt9t031_g_mbus_config,
+	.s_mbus_config	= mt9t031_s_mbus_config,
 };
 
 static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
@@ -832,18 +754,13 @@
 			 const struct i2c_device_id *did)
 {
 	struct mt9t031 *mt9t031;
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	int ret;
 
-	if (icd) {
-		struct soc_camera_link *icl = to_soc_camera_link(icd);
-		if (!icl) {
-			dev_err(&client->dev, "MT9T031 driver needs platform data\n");
-			return -EINVAL;
-		}
-
-		icd->ops = &mt9t031_ops;
+	if (!icl) {
+		dev_err(&client->dev, "MT9T031 driver needs platform data\n");
+		return -EINVAL;
 	}
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
@@ -857,6 +774,33 @@
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
+	v4l2_ctrl_handler_init(&mt9t031->hdl, 5);
+	v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 64);
+
+	/*
+	 * Simulated autoexposure. If enabled, we calculate shutter width
+	 * ourselves in the driver based on vertical blanking and frame width
+	 */
+	mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl,
+			&mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+			V4L2_EXPOSURE_AUTO);
+	mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+	mt9t031->subdev.ctrl_handler = &mt9t031->hdl;
+	if (mt9t031->hdl.error) {
+		int err = mt9t031->hdl.error;
+
+		kfree(mt9t031);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure,
+				V4L2_EXPOSURE_MANUAL, true);
 
 	mt9t031->y_skip_top	= 0;
 	mt9t031->rect.left	= MT9T031_COLUMN_SKIP;
@@ -864,12 +808,6 @@
 	mt9t031->rect.width	= MT9T031_MAX_WIDTH;
 	mt9t031->rect.height	= MT9T031_MAX_HEIGHT;
 
-	/*
-	 * Simulated autoexposure. If enabled, we calculate shutter width
-	 * ourselves in the driver based on vertical blanking and frame width
-	 */
-	mt9t031->autoexposure = 1;
-
 	mt9t031->xskip = 1;
 	mt9t031->yskip = 1;
 
@@ -880,8 +818,7 @@
 	mt9t031_disable(client);
 
 	if (ret) {
-		if (icd)
-			icd->ops = NULL;
+		v4l2_ctrl_handler_free(&mt9t031->hdl);
 		kfree(mt9t031);
 	}
 
@@ -891,10 +828,9 @@
 static int mt9t031_remove(struct i2c_client *client)
 {
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	if (icd)
-		icd->ops = NULL;
+	v4l2_device_unregister_subdev(&mt9t031->subdev);
+	v4l2_ctrl_handler_free(&mt9t031->hdl);
 	kfree(mt9t031);
 
 	return 0;
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index d2e0a50..32114a3 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -22,11 +22,11 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
 
 #include <media/mt9t112.h>
 #include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-common.h>
 
@@ -34,11 +34,7 @@
 /* #define EXT_CLOCK 24000000 */
 
 /************************************************************************
-
-
 			macro
-
-
 ************************************************************************/
 /*
  * frame size
@@ -80,17 +76,8 @@
 #define VAR8(id, offset) _VAR(id, offset, 0x8000)
 
 /************************************************************************
-
-
 			struct
-
-
 ************************************************************************/
-struct mt9t112_frame_size {
-	u16 width;
-	u16 height;
-};
-
 struct mt9t112_format {
 	enum v4l2_mbus_pixelcode code;
 	enum v4l2_colorspace colorspace;
@@ -102,21 +89,17 @@
 	struct v4l2_subdev		 subdev;
 	struct mt9t112_camera_info	*info;
 	struct i2c_client		*client;
-	struct soc_camera_device	 icd;
-	struct mt9t112_frame_size	 frame;
+	struct v4l2_rect		 frame;
 	const struct mt9t112_format	*format;
 	int				 model;
 	u32				 flags;
 /* for flags */
-#define INIT_DONE  (1<<0)
+#define INIT_DONE	(1 << 0)
+#define PCLK_RISING	(1 << 1)
 };
 
 /************************************************************************
-
-
 			supported format
-
-
 ************************************************************************/
 
 static const struct mt9t112_format mt9t112_cfmts[] = {
@@ -154,11 +137,7 @@
 };
 
 /************************************************************************
-
-
 			general function
-
-
 ************************************************************************/
 static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
 {
@@ -326,50 +305,47 @@
 	n = (n >> 8) & 0x003f;
 
 	enable = ((6000 > ext) || (54000 < ext)) ? "X" : "";
-	dev_info(&client->dev, "EXTCLK          : %10u K %s\n", ext, enable);
+	dev_dbg(&client->dev, "EXTCLK          : %10u K %s\n", ext, enable);
 
 	vco = 2 * m * ext / (n+1);
 	enable = ((384000 > vco) || (768000 < vco)) ? "X" : "";
-	dev_info(&client->dev, "VCO             : %10u K %s\n", vco, enable);
+	dev_dbg(&client->dev, "VCO             : %10u K %s\n", vco, enable);
 
 	clk = vco / (p1+1) / (p2+1);
 	enable = (96000 < clk) ? "X" : "";
-	dev_info(&client->dev, "PIXCLK          : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "PIXCLK          : %10u K %s\n", clk, enable);
 
 	clk = vco / (p3+1);
 	enable = (768000 < clk) ? "X" : "";
-	dev_info(&client->dev, "MIPICLK         : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "MIPICLK         : %10u K %s\n", clk, enable);
 
 	clk = vco / (p6+1);
 	enable = (96000 < clk) ? "X" : "";
-	dev_info(&client->dev, "MCU CLK         : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "MCU CLK         : %10u K %s\n", clk, enable);
 
 	clk = vco / (p5+1);
 	enable = (54000 < clk) ? "X" : "";
-	dev_info(&client->dev, "SOC CLK         : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "SOC CLK         : %10u K %s\n", clk, enable);
 
 	clk = vco / (p4+1);
 	enable = (70000 < clk) ? "X" : "";
-	dev_info(&client->dev, "Sensor CLK      : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "Sensor CLK      : %10u K %s\n", clk, enable);
 
 	clk = vco / (p7+1);
-	dev_info(&client->dev, "External sensor : %10u K\n", clk);
+	dev_dbg(&client->dev, "External sensor : %10u K\n", clk);
 
 	clk = ext / (n+1);
 	enable = ((2000 > clk) || (24000 < clk)) ? "X" : "";
-	dev_info(&client->dev, "PFD             : %10u K %s\n", clk, enable);
+	dev_dbg(&client->dev, "PFD             : %10u K %s\n", clk, enable);
 
 	return 0;
 }
 #endif
 
-static void mt9t112_frame_check(u32 *width, u32 *height)
+static void mt9t112_frame_check(u32 *width, u32 *height, u32 *left, u32 *top)
 {
-	if (*width > MAX_WIDTH)
-		*width = MAX_WIDTH;
-
-	if (*height > MAX_HEIGHT)
-		*height = MAX_HEIGHT;
+	soc_camera_limit_side(left, width, 0, 0, MAX_WIDTH);
+	soc_camera_limit_side(top, height, 0, 0, MAX_HEIGHT);
 }
 
 static int mt9t112_set_a_frame_size(const struct i2c_client *client,
@@ -758,48 +734,7 @@
 }
 
 /************************************************************************
-
-
-			soc_camera_ops
-
-
-************************************************************************/
-static int mt9t112_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long	flags)
-{
-	return 0;
-}
-
-static unsigned long mt9t112_query_bus_param(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_MASTER | SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH;
-
-	flags |= (priv->info->flags & MT9T112_FLAG_PCLK_RISING_EDGE) ?
-		SOCAM_PCLK_SAMPLE_RISING : SOCAM_PCLK_SAMPLE_FALLING;
-
-	if (priv->info->flags & MT9T112_FLAG_DATAWIDTH_8)
-		flags |= SOCAM_DATAWIDTH_8;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static struct soc_camera_ops mt9t112_ops = {
-	.set_bus_param		= mt9t112_set_bus_param,
-	.query_bus_param	= mt9t112_query_bus_param,
-};
-
-/************************************************************************
-
-
 			v4l2_subdev_core_ops
-
-
 ************************************************************************/
 static int mt9t112_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *id)
@@ -850,11 +785,7 @@
 
 
 /************************************************************************
-
-
 			v4l2_subdev_video_ops
-
-
 ************************************************************************/
 static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
 {
@@ -877,8 +808,7 @@
 	}
 
 	if (!(priv->flags & INIT_DONE)) {
-		u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
-			     priv->info->flags) ? 0x0001 : 0x0000;
+		u16 param = PCLK_RISING & priv->flags ? 0x0001 : 0x0000;
 
 		ECHECKER(ret, mt9t112_init_camera(client));
 
@@ -910,19 +840,12 @@
 	return ret;
 }
 
-static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
+static int mt9t112_set_params(struct mt9t112_priv *priv,
+			      const struct v4l2_rect *rect,
 			      enum v4l2_mbus_pixelcode code)
 {
-	struct mt9t112_priv *priv = to_mt9t112(client);
 	int i;
 
-	priv->format = NULL;
-
-	/*
-	 * frame size check
-	 */
-	mt9t112_frame_check(&width, &height);
-
 	/*
 	 * get color format
 	 */
@@ -933,8 +856,13 @@
 	if (i == ARRAY_SIZE(mt9t112_cfmts))
 		return -EINVAL;
 
-	priv->frame.width  = (u16)width;
-	priv->frame.height = (u16)height;
+	priv->frame  = *rect;
+
+	/*
+	 * frame size check
+	 */
+	mt9t112_frame_check(&priv->frame.width, &priv->frame.height,
+			    &priv->frame.left, &priv->frame.top);
 
 	priv->format = mt9t112_cfmts + i;
 
@@ -945,9 +873,12 @@
 {
 	a->bounds.left			= 0;
 	a->bounds.top			= 0;
-	a->bounds.width			= VGA_WIDTH;
-	a->bounds.height		= VGA_HEIGHT;
-	a->defrect			= a->bounds;
+	a->bounds.width			= MAX_WIDTH;
+	a->bounds.height		= MAX_HEIGHT;
+	a->defrect.left			= 0;
+	a->defrect.top			= 0;
+	a->defrect.width		= VGA_WIDTH;
+	a->defrect.height		= VGA_HEIGHT;
 	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
 	a->pixelaspect.denominator	= 1;
@@ -957,11 +888,11 @@
 
 static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	a->c.left	= 0;
-	a->c.top	= 0;
-	a->c.width	= VGA_WIDTH;
-	a->c.height	= VGA_HEIGHT;
-	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct mt9t112_priv *priv = to_mt9t112(client);
+
+	a->c	= priv->frame;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	return 0;
 }
@@ -969,10 +900,10 @@
 static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct mt9t112_priv *priv = to_mt9t112(client);
 	struct v4l2_rect *rect = &a->c;
 
-	return mt9t112_set_params(client, rect->width, rect->height,
-				 V4L2_MBUS_FMT_UYVY8_2X8);
+	return mt9t112_set_params(priv, rect, priv->format->code);
 }
 
 static int mt9t112_g_fmt(struct v4l2_subdev *sd,
@@ -981,16 +912,9 @@
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct mt9t112_priv *priv = to_mt9t112(client);
 
-	if (!priv->format) {
-		int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
-					     V4L2_MBUS_FMT_UYVY8_2X8);
-		if (ret < 0)
-			return ret;
-	}
-
 	mf->width	= priv->frame.width;
 	mf->height	= priv->frame.height;
-	/* TODO: set colorspace */
+	mf->colorspace	= priv->format->colorspace;
 	mf->code	= priv->format->code;
 	mf->field	= V4L2_FIELD_NONE;
 
@@ -1001,17 +925,42 @@
 			 struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct mt9t112_priv *priv = to_mt9t112(client);
+	struct v4l2_rect rect = {
+		.width = mf->width,
+		.height = mf->height,
+		.left = priv->frame.left,
+		.top = priv->frame.top,
+	};
+	int ret;
 
-	/* TODO: set colorspace */
-	return mt9t112_set_params(client, mf->width, mf->height, mf->code);
+	ret = mt9t112_set_params(priv, &rect, mf->code);
+
+	if (!ret)
+		mf->colorspace = priv->format->colorspace;
+
+	return ret;
 }
 
 static int mt9t112_try_fmt(struct v4l2_subdev *sd,
 			   struct v4l2_mbus_framefmt *mf)
 {
-	mt9t112_frame_check(&mf->width, &mf->height);
+	unsigned int top, left;
+	int i;
 
-	/* TODO: set colorspace */
+	for (i = 0; i < ARRAY_SIZE(mt9t112_cfmts); i++)
+		if (mt9t112_cfmts[i].code == mf->code)
+			break;
+
+	if (i == ARRAY_SIZE(mt9t112_cfmts)) {
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	} else {
+		mf->colorspace	= mt9t112_cfmts[i].colorspace;
+	}
+
+	mt9t112_frame_check(&mf->width, &mf->height, &left, &top);
+
 	mf->field = V4L2_FIELD_NONE;
 
 	return 0;
@@ -1024,6 +973,35 @@
 		return -EINVAL;
 
 	*code = mt9t112_cfmts[index].code;
+
+	return 0;
+}
+
+static int mt9t112_g_mbus_config(struct v4l2_subdev *sd,
+				 struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH |
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9t112_s_mbus_config(struct v4l2_subdev *sd,
+				 const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	struct mt9t112_priv *priv = to_mt9t112(client);
+
+	if (soc_camera_apply_board_flags(icl, cfg) & V4L2_MBUS_PCLK_SAMPLE_RISING)
+		priv->flags |= PCLK_RISING;
+
 	return 0;
 }
 
@@ -1036,31 +1014,24 @@
 	.g_crop		= mt9t112_g_crop,
 	.s_crop		= mt9t112_s_crop,
 	.enum_mbus_fmt	= mt9t112_enum_fmt,
+	.g_mbus_config	= mt9t112_g_mbus_config,
+	.s_mbus_config	= mt9t112_s_mbus_config,
 };
 
 /************************************************************************
-
-
 			i2c driver
-
-
 ************************************************************************/
 static struct v4l2_subdev_ops mt9t112_subdev_ops = {
 	.core	= &mt9t112_subdev_core_ops,
 	.video	= &mt9t112_subdev_video_ops,
 };
 
-static int mt9t112_camera_probe(struct soc_camera_device *icd,
-				struct i2c_client *client)
+static int mt9t112_camera_probe(struct i2c_client *client)
 {
 	struct mt9t112_priv *priv = to_mt9t112(client);
 	const char          *devname;
 	int                  chipid;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show chip ID
 	 */
@@ -1088,20 +1059,21 @@
 static int mt9t112_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
-	struct mt9t112_priv        *priv;
-	struct soc_camera_device   *icd = client->dev.platform_data;
-	struct soc_camera_link     *icl;
-	int                         ret;
+	struct mt9t112_priv *priv;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	struct v4l2_rect rect = {
+		.width = VGA_WIDTH,
+		.height = VGA_HEIGHT,
+		.left = (MAX_WIDTH - VGA_WIDTH) / 2,
+		.top = (MAX_HEIGHT - VGA_HEIGHT) / 2,
+	};
+	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "mt9t112: missing soc-camera data!\n");
+	if (!icl || !icl->priv) {
+		dev_err(&client->dev, "mt9t112: missing platform data!\n");
 		return -EINVAL;
 	}
 
-	icl = to_soc_camera_link(icd);
-	if (!icl || !icl->priv)
-		return -EINVAL;
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -1110,13 +1082,12 @@
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
 
-	icd->ops = &mt9t112_ops;
-
-	ret = mt9t112_camera_probe(icd, client);
-	if (ret) {
-		icd->ops = NULL;
+	ret = mt9t112_camera_probe(client);
+	if (ret)
 		kfree(priv);
-	}
+
+	/* Cannot fail: using the default supported pixel code */
+	mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8);
 
 	return ret;
 }
@@ -1124,9 +1095,7 @@
 static int mt9t112_remove(struct i2c_client *client)
 {
 	struct mt9t112_priv *priv = to_mt9t112(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
 	kfree(priv);
 	return 0;
 }
@@ -1147,11 +1116,7 @@
 };
 
 /************************************************************************
-
-
 			module function
-
-
 ************************************************************************/
 static int __init mt9t112_module_init(void)
 {
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 893a8b8..db74dd2 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <asm/div64.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 51b0fcc..690ee0d 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -13,10 +13,13 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/log2.h>
+#include <linux/module.h>
 
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 
 /*
  * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
@@ -100,6 +103,17 @@
 
 struct mt9v022 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* exposure/auto-exposure cluster */
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
+	struct {
+		/* gain/auto-gain cluster */
+		struct v4l2_ctrl *autogain;
+		struct v4l2_ctrl *gain;
+	};
 	struct v4l2_rect rect;	/* Sensor window */
 	const struct mt9v022_datafmt *fmt;
 	const struct mt9v022_datafmt *fmts;
@@ -178,6 +192,8 @@
 		ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
 	if (!ret)
 		ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
+	if (!ret)
+		return v4l2_ctrl_handler_setup(&mt9v022->hdl);
 
 	return ret;
 }
@@ -199,78 +215,6 @@
 	return 0;
 }
 
-static int mt9v022_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
-	int ret;
-	u16 pixclk = 0;
-
-	/* Only one width bit may be set */
-	if (!is_power_of_2(width_flag))
-		return -EINVAL;
-
-	if (icl->set_bus_param) {
-		ret = icl->set_bus_param(icl, width_flag);
-		if (ret)
-			return ret;
-	} else {
-		/*
-		 * Without board specific bus width settings we only support the
-		 * sensors native bus width
-		 */
-		if (width_flag != SOCAM_DATAWIDTH_10)
-			return -EINVAL;
-	}
-
-	flags = soc_camera_apply_sensor_flags(icl, flags);
-
-	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
-		pixclk |= 0x10;
-
-	if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH))
-		pixclk |= 0x1;
-
-	if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH))
-		pixclk |= 0x2;
-
-	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
-	if (ret < 0)
-		return ret;
-
-	if (!(flags & SOCAM_MASTER))
-		mt9v022->chip_control &= ~0x8;
-
-	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
-		pixclk, mt9v022->chip_control);
-
-	return 0;
-}
-
-static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
-		SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (icl->query_bus_param)
-		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -389,7 +333,7 @@
 
 	/*
 	 * The caller provides a supported format, as verified per call to
-	 * icd->try_fmt(), datawidth is from our supported format list
+	 * .try_mbus_fmt(), datawidth is from our supported format list
 	 */
 	switch (mf->code) {
 	case V4L2_MBUS_FMT_Y8_1X8:
@@ -502,236 +446,131 @@
 }
 #endif
 
-static const struct v4l2_queryctrl mt9v022_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Analog Gain",
-		.minimum	= 64,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= 1,
-		.maximum	= 255,
-		.step		= 1,
-		.default_value	= 255,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_AUTOGAIN,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Gain",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}
-};
-
-static struct soc_camera_ops mt9v022_ops = {
-	.set_bus_param		= mt9v022_set_bus_param,
-	.query_bus_param	= mt9v022_query_bus_param,
-	.controls		= mt9v022_controls,
-	.num_controls		= ARRAY_SIZE(mt9v022_controls),
-};
-
-static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+					       struct mt9v022, hdl);
+	struct v4l2_subdev *sd = &mt9v022->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct v4l2_queryctrl *qctrl;
+	struct v4l2_ctrl *gain = mt9v022->gain;
+	struct v4l2_ctrl *exp = mt9v022->exposure;
 	unsigned long range;
 	int data;
 
-	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-
 	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		data = reg_read(client, MT9V022_READ_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x10);
-		break;
-	case V4L2_CID_HFLIP:
-		data = reg_read(client, MT9V022_READ_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x20);
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x1);
-		break;
 	case V4L2_CID_AUTOGAIN:
-		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x2);
-		break;
-	case V4L2_CID_GAIN:
 		data = reg_read(client, MT9V022_ANALOG_GAIN);
 		if (data < 0)
 			return -EIO;
 
-		range = qctrl->maximum - qctrl->minimum;
-		ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum;
-
-		break;
-	case V4L2_CID_EXPOSURE:
+		range = gain->maximum - gain->minimum;
+		gain->val = ((data - 16) * range + 24) / 48 + gain->minimum;
+		return 0;
+	case V4L2_CID_EXPOSURE_AUTO:
 		data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
 		if (data < 0)
 			return -EIO;
 
-		range = qctrl->maximum - qctrl->minimum;
-		ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum;
-
-		break;
+		range = exp->maximum - exp->minimum;
+		exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
+		return 0;
 	}
-	return 0;
+	return -EINVAL;
 }
 
-static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int data;
+	struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+					       struct mt9v022, hdl);
+	struct v4l2_subdev *sd = &mt9v022->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct v4l2_queryctrl *qctrl;
-
-	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-	if (!qctrl)
-		return -EINVAL;
+	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9V022_READ_MODE, 0x10);
 		else
 			data = reg_clear(client, MT9V022_READ_MODE, 0x10);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_HFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9V022_READ_MODE, 0x20);
 		else
 			data = reg_clear(client, MT9V022_READ_MODE, 0x20);
 		if (data < 0)
 			return -EIO;
-		break;
-	case V4L2_CID_GAIN:
-		/* mt9v022 has minimum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			unsigned long range = qctrl->maximum - qctrl->minimum;
+		return 0;
+	case V4L2_CID_AUTOGAIN:
+		if (ctrl->val) {
+			if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
+				return -EIO;
+		} else {
+			struct v4l2_ctrl *gain = mt9v022->gain;
+			/* mt9v022 has minimum == default */
+			unsigned long range = gain->maximum - gain->minimum;
 			/* Valid values 16 to 64, 32 to 64 must be even. */
-			unsigned long gain = ((ctrl->value - qctrl->minimum) *
+			unsigned long gain_val = ((gain->val - gain->minimum) *
 					      48 + range / 2) / range + 16;
-			if (gain >= 32)
-				gain &= ~1;
+
+			if (gain_val >= 32)
+				gain_val &= ~1;
+
 			/*
 			 * The user wants to set gain manually, hope, she
 			 * knows, what she's doing... Switch AGC off.
 			 */
-
 			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
 				return -EIO;
 
 			dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
-				reg_read(client, MT9V022_ANALOG_GAIN), gain);
-			if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
+				reg_read(client, MT9V022_ANALOG_GAIN), gain_val);
+			if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0)
 				return -EIO;
 		}
-		break;
-	case V4L2_CID_EXPOSURE:
-		/* mt9v022 has maximum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			unsigned long range = qctrl->maximum - qctrl->minimum;
-			unsigned long shutter = ((ctrl->value - qctrl->minimum) *
-						 479 + range / 2) / range + 1;
+		return 0;
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (ctrl->val == V4L2_EXPOSURE_AUTO) {
+			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+		} else {
+			struct v4l2_ctrl *exp = mt9v022->exposure;
+			unsigned long range = exp->maximum - exp->minimum;
+			unsigned long shutter = ((exp->val - exp->minimum) *
+					479 + range / 2) / range + 1;
+
 			/*
 			 * The user wants to set shutter width manually, hope,
 			 * she knows, what she's doing... Switch AEC off.
 			 */
-
-			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
+			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+			if (data < 0)
 				return -EIO;
-
 			dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
-				reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
-				shutter);
+					reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
+					shutter);
 			if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
-				      shutter) < 0)
+						shutter) < 0)
 				return -EIO;
 		}
-		break;
-	case V4L2_CID_AUTOGAIN:
-		if (ctrl->value)
-			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2);
-		else
-			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2);
-		if (data < 0)
-			return -EIO;
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->value)
-			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
-		else
-			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
-		if (data < 0)
-			return -EIO;
-		break;
+		return 0;
 	}
-	return 0;
+	return -EINVAL;
 }
 
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int mt9v022_video_probe(struct soc_camera_device *icd,
-			       struct i2c_client *client)
+static int mt9v022_video_probe(struct i2c_client *client)
 {
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	s32 data;
 	int ret;
 	unsigned long flags;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
 
@@ -805,16 +644,6 @@
 	return ret;
 }
 
-static void mt9v022_video_remove(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
-		icd->parent, icd->vdev);
-	if (icl->free_bus)
-		icl->free_bus(icl);
-}
-
 static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -825,9 +654,12 @@
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = {
+	.g_volatile_ctrl = mt9v022_g_volatile_ctrl,
+	.s_ctrl = mt9v022_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
-	.g_ctrl		= mt9v022_g_ctrl,
-	.s_ctrl		= mt9v022_s_ctrl,
 	.g_chip_ident	= mt9v022_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9v022_g_register,
@@ -848,6 +680,72 @@
 	return 0;
 }
 
+static int mt9v022_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE |
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
+				 const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+	unsigned int bps = soc_mbus_get_fmtdesc(mt9v022->fmt->code)->bits_per_sample;
+	int ret;
+	u16 pixclk = 0;
+
+	if (icl->set_bus_param) {
+		ret = icl->set_bus_param(icl, 1 << (bps - 1));
+		if (ret)
+			return ret;
+	} else if (bps != 10) {
+		/*
+		 * Without board specific bus width settings we only support the
+		 * sensors native bus width
+		 */
+		return -EINVAL;
+	}
+
+	if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+		pixclk |= 0x10;
+
+	if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH))
+		pixclk |= 0x1;
+
+	if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
+		pixclk |= 0x2;
+
+	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
+	if (ret < 0)
+		return ret;
+
+	if (!(flags & V4L2_MBUS_MASTER))
+		mt9v022->chip_control &= ~0x8;
+
+	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
+		pixclk, mt9v022->chip_control);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.s_stream	= mt9v022_s_stream,
 	.s_mbus_fmt	= mt9v022_s_fmt,
@@ -857,6 +755,8 @@
 	.g_crop		= mt9v022_g_crop,
 	.cropcap	= mt9v022_cropcap,
 	.enum_mbus_fmt	= mt9v022_enum_fmt,
+	.g_mbus_config	= mt9v022_g_mbus_config,
+	.s_mbus_config	= mt9v022_s_mbus_config,
 };
 
 static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
@@ -873,17 +773,10 @@
 			 const struct i2c_device_id *did)
 {
 	struct mt9v022 *mt9v022;
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "MT9V022: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9V022 driver needs platform data\n");
 		return -EINVAL;
@@ -900,10 +793,39 @@
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
+	v4l2_ctrl_handler_init(&mt9v022->hdl, 6);
+	v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 64);
+
+	/*
+	 * Simulated autoexposure. If enabled, we calculate shutter width
+	 * ourselves in the driver based on vertical blanking and frame width
+	 */
+	mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl,
+			&mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+			V4L2_EXPOSURE_AUTO);
+	mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+	mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
+	if (mt9v022->hdl.error) {
+		int err = mt9v022->hdl.error;
+
+		kfree(mt9v022);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure,
+				V4L2_EXPOSURE_MANUAL, true);
+	v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true);
 
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
 
-	icd->ops		= &mt9v022_ops;
 	/*
 	 * MT9V022 _really_ corrupts the first read out line.
 	 * TODO: verify on i.MX31
@@ -914,9 +836,9 @@
 	mt9v022->rect.width	= MT9V022_MAX_WIDTH;
 	mt9v022->rect.height	= MT9V022_MAX_HEIGHT;
 
-	ret = mt9v022_video_probe(icd, client);
+	ret = mt9v022_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&mt9v022->hdl);
 		kfree(mt9v022);
 	}
 
@@ -926,10 +848,12 @@
 static int mt9v022_remove(struct i2c_client *client)
 {
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
-	mt9v022_video_remove(icd);
+	v4l2_device_unregister_subdev(&mt9v022->subdev);
+	if (icl->free_bus)
+		icl->free_bus(icl);
+	v4l2_ctrl_handler_free(&mt9v022->hdl);
 	kfree(mt9v022);
 
 	return 0;
diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c
index c64e1dc..f080c16 100644
--- a/drivers/media/video/mt9v032.c
+++ b/drivers/media/video/mt9v032.c
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
 
 #include <media/mt9v032.h>
 #include <media/v4l2-ctrls.h>
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 087db12..18e94c7 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -78,11 +78,10 @@
 #define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
 			CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
 
-#define CSI_BUS_FLAGS	(SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \
-			SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \
-			SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
-			SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \
-			SOCAM_DATAWIDTH_8)
+#define CSI_BUS_FLAGS	(V4L2_MBUS_MASTER | V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+			V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+			V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+			V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_LOW)
 
 #define MAX_VIDEO_MEM 16	/* Video memory limit in megabytes */
 
@@ -490,59 +489,73 @@
 
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
-	unsigned long camera_flags, common_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long common_flags;
 	unsigned int csicr1;
 	int ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
 	/* MX1 supports only 8bit buswidth */
-	common_flags = soc_camera_bus_param_compatible(camera_flags,
-						       CSI_BUS_FLAGS);
-	if (!common_flags)
-		return -EINVAL;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg, CSI_BUS_FLAGS);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%x\n",
+				 cfg.flags, CSI_BUS_FLAGS);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	} else {
+		common_flags = CSI_BUS_FLAGS;
+	}
 
 	/* Make choises, based on platform choice */
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-		(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+		(common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 			if (!pcdev->pdata ||
 			     pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
-				common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 			else
-				common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 	}
 
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-		(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+		(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
 			if (!pcdev->pdata ||
 			     pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
-				common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
 			else
-				common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
 	}
 
-	if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
-		(common_flags & SOCAM_DATA_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
+		(common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
 			if (!pcdev->pdata ||
 			     pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
-				common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
+				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
 			else
-				common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
+				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
 	}
 
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+			common_flags, ret);
 		return ret;
+	}
 
 	csicr1 = __raw_readl(pcdev->base + CSICR1);
 
-	if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		csicr1 |= CSICR1_REDGE;
-	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_SOF_POL;
-	if (common_flags & SOCAM_DATA_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
 		csicr1 |= CSICR1_DATA_POL;
 
 	__raw_writel(csicr1, pcdev->base + CSICR1);
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index ec2410c..a803d9e 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -686,16 +686,15 @@
 			icd, &icd->video_lock);
 }
 
-#define MX2_BUS_FLAGS	(SOCAM_DATAWIDTH_8 | \
-			SOCAM_MASTER | \
-			SOCAM_VSYNC_ACTIVE_HIGH | \
-			SOCAM_VSYNC_ACTIVE_LOW | \
-			SOCAM_HSYNC_ACTIVE_HIGH | \
-			SOCAM_HSYNC_ACTIVE_LOW | \
-			SOCAM_PCLK_SAMPLE_RISING | \
-			SOCAM_PCLK_SAMPLE_FALLING | \
-			SOCAM_DATA_ACTIVE_HIGH | \
-			SOCAM_DATA_ACTIVE_LOW)
+#define MX2_BUS_FLAGS	(V4L2_MBUS_MASTER | \
+			V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+			V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+			V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+			V4L2_MBUS_HSYNC_ACTIVE_LOW | \
+			V4L2_MBUS_PCLK_SAMPLE_RISING | \
+			V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+			V4L2_MBUS_DATA_ACTIVE_HIGH | \
+			V4L2_MBUS_DATA_ACTIVE_LOW)
 
 static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
 {
@@ -770,46 +769,59 @@
 static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
-	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
-	unsigned long camera_flags, common_flags;
-	int ret = 0;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long common_flags;
+	int ret;
 	int bytesperline;
 	u32 csicr1 = pcdev->csicr1;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	common_flags = soc_camera_bus_param_compatible(camera_flags,
-				MX2_BUS_FLAGS);
-	if (!common_flags)
-		return -EINVAL;
-
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
-		if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
-		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
-	}
-
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
-		if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
-		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
-	}
-
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg, MX2_BUS_FLAGS);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%x\n",
+				 cfg.flags, MX2_BUS_FLAGS);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
 		return ret;
+	} else {
+		common_flags = MX2_BUS_FLAGS;
+	}
 
-	if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
+		if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
+		else
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
+	}
+
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
+		if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+		else
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
+	}
+
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+			common_flags, ret);
+		return ret;
+	}
+
+	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
 		csicr1 |= CSICR1_REDGE;
-	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_SOF_POL;
-	if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_HSYNC_POL;
 	if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
 		csicr1 |= CSICR1_SWAP16_EN;
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c8e958a..f96f92f 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -109,10 +109,12 @@
 
 	unsigned long		platform_flags;
 	unsigned long		mclk;
+	u16			width_flags;	/* max 15 bits */
 
 	struct list_head	capture;
 	spinlock_t		lock;		/* Protects video buffer lists */
 	struct mx3_camera_buffer *active;
+	size_t			buf_total;
 	struct vb2_alloc_ctx	*alloc_ctx;
 	enum v4l2_field		field;
 	int			sequence;
@@ -190,79 +192,53 @@
  * Calculate the __buffer__ (not data) size and number of buffers.
  */
 static int mx3_videobuf_setup(struct vb2_queue *vq,
+			const struct v4l2_format *fmt,
 			unsigned int *count, unsigned int *num_planes,
 			unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
-	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
-						icd->current_fmt->host_fmt);
-
-	if (bytes_per_line < 0)
-		return bytes_per_line;
+	int bytes_per_line;
+	unsigned int height;
 
 	if (!mx3_cam->idmac_channel[0])
 		return -EINVAL;
 
-	*num_planes = 1;
-
-	mx3_cam->sequence = 0;
-	sizes[0] = bytes_per_line * icd->user_height;
-	alloc_ctxs[0] = mx3_cam->alloc_ctx;
-
-	if (!*count)
-		*count = 32;
-
-	if (sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024)
-		*count = MAX_VIDEO_MEM * 1024 * 1024 / sizes[0];
-
-	return 0;
-}
-
-static int mx3_videobuf_prepare(struct vb2_buffer *vb)
-{
-	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
-	struct scatterlist *sg;
-	struct mx3_camera_buffer *buf;
-	size_t new_size;
-	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+	if (fmt) {
+		const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
+								fmt->fmt.pix.pixelformat);
+		if (!xlate)
+			return -EINVAL;
+		bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
+							 xlate->host_fmt);
+		height = fmt->fmt.pix.height;
+	} else {
+		/* Called from VIDIOC_REQBUFS or in compatibility mode */
+		bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 						icd->current_fmt->host_fmt);
-
+		height = icd->user_height;
+	}
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	buf = to_mx3_vb(vb);
-	sg = &buf->sg;
+	sizes[0] = bytes_per_line * height;
 
-	new_size = bytes_per_line * icd->user_height;
+	alloc_ctxs[0] = mx3_cam->alloc_ctx;
 
-	if (vb2_plane_size(vb, 0) < new_size) {
-		dev_err(icd->parent, "Buffer too small (%lu < %zu)\n",
-			vb2_plane_size(vb, 0), new_size);
-		return -ENOBUFS;
-	}
+	if (!vq->num_buffers)
+		mx3_cam->sequence = 0;
 
-	if (buf->state == CSI_BUF_NEEDS_INIT) {
-		sg_dma_address(sg)	= vb2_dma_contig_plane_dma_addr(vb, 0);
-		sg_dma_len(sg)		= new_size;
+	if (!*count)
+		*count = 2;
 
-		buf->txd = ichan->dma_chan.device->device_prep_slave_sg(
-			&ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
-			DMA_PREP_INTERRUPT);
-		if (!buf->txd)
-			return -EIO;
+	/* If *num_planes != 0, we have already verified *count. */
+	if (!*num_planes &&
+	    sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024)
+		*count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) /
+			sizes[0];
 
-		buf->txd->callback_param	= buf->txd;
-		buf->txd->callback		= mx3_cam_dma_done;
-
-		buf->state = CSI_BUF_PREPARED;
-	}
-
-	vb2_set_plane_payload(vb, 0, new_size);
+	*num_planes = 1;
 
 	return 0;
 }
@@ -286,28 +262,58 @@
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
-	struct dma_async_tx_descriptor *txd = buf->txd;
-	struct idmac_channel *ichan = to_idmac_chan(txd->chan);
+	struct scatterlist *sg = &buf->sg;
+	struct dma_async_tx_descriptor *txd;
+	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 	struct idmac_video_param *video = &ichan->params.video;
-	dma_cookie_t cookie;
-	u32 fourcc = icd->current_fmt->host_fmt->fourcc;
+	const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, host_fmt);
 	unsigned long flags;
+	dma_cookie_t cookie;
+	size_t new_size;
+
+	BUG_ON(bytes_per_line <= 0);
+
+	new_size = bytes_per_line * icd->user_height;
+
+	if (vb2_plane_size(vb, 0) < new_size) {
+		dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n",
+			vb->v4l2_buf.index, vb2_plane_size(vb, 0), new_size);
+		goto error;
+	}
+
+	if (buf->state == CSI_BUF_NEEDS_INIT) {
+		sg_dma_address(sg)	= vb2_dma_contig_plane_dma_addr(vb, 0);
+		sg_dma_len(sg)		= new_size;
+
+		txd = ichan->dma_chan.device->device_prep_slave_sg(
+			&ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
+			DMA_PREP_INTERRUPT);
+		if (!txd)
+			goto error;
+
+		txd->callback_param	= txd;
+		txd->callback		= mx3_cam_dma_done;
+
+		buf->state		= CSI_BUF_PREPARED;
+		buf->txd		= txd;
+	} else {
+		txd = buf->txd;
+	}
+
+	vb2_set_plane_payload(vb, 0, new_size);
 
 	/* This is the configuration of one sg-element */
-	video->out_pixel_fmt	= fourcc_to_ipu_pix(fourcc);
+	video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc);
 
 	if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
 		/*
-		 * If the IPU DMA channel is configured to transport
-		 * generic 8-bit data, we have to set up correctly the
-		 * geometry parameters upon the current pixel format.
-		 * So, since the DMA horizontal parameters are expressed
-		 * in bytes not pixels, convert these in the right unit.
+		 * If the IPU DMA channel is configured to transfer generic
+		 * 8-bit data, we have to set up the geometry parameters
+		 * correctly, according to the current pixel format. The DMA
+		 * horizontal parameters in this case are expressed in bytes,
+		 * not in pixels.
 		 */
-		int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
-						icd->current_fmt->host_fmt);
-		BUG_ON(bytes_per_line <= 0);
-
 		video->out_width	= bytes_per_line;
 		video->out_height	= icd->user_height;
 		video->out_stride	= bytes_per_line;
@@ -351,6 +357,7 @@
 		mx3_cam->active = NULL;
 
 	spin_unlock_irqrestore(&mx3_cam->lock, flags);
+error:
 	vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
 }
 
@@ -384,17 +391,24 @@
 	}
 
 	spin_unlock_irqrestore(&mx3_cam->lock, flags);
+
+	mx3_cam->buf_total -= vb2_plane_size(vb, 0);
 }
 
 static int mx3_videobuf_init(struct vb2_buffer *vb)
 {
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
+
 	/* This is for locking debugging only */
 	INIT_LIST_HEAD(&buf->queue);
 	sg_init_table(&buf->sg, 1);
 
 	buf->state = CSI_BUF_NEEDS_INIT;
-	buf->txd = NULL;
+
+	mx3_cam->buf_total += vb2_plane_size(vb, 0);
 
 	return 0;
 }
@@ -405,13 +419,12 @@
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
-	struct dma_chan *chan;
 	struct mx3_camera_buffer *buf, *tmp;
 	unsigned long flags;
 
 	if (ichan) {
-		chan = &ichan->dma_chan;
-		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		struct dma_chan *chan = &ichan->dma_chan;
+		chan->device->device_control(chan, DMA_PAUSE, 0);
 	}
 
 	spin_lock_irqsave(&mx3_cam->lock, flags);
@@ -419,8 +432,8 @@
 	mx3_cam->active = NULL;
 
 	list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) {
-		buf->state = CSI_BUF_NEEDS_INIT;
 		list_del_init(&buf->queue);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
 	}
 
 	spin_unlock_irqrestore(&mx3_cam->lock, flags);
@@ -430,7 +443,6 @@
 
 static struct vb2_ops mx3_videobuf_ops = {
 	.queue_setup	= mx3_videobuf_setup,
-	.buf_prepare	= mx3_videobuf_prepare,
 	.buf_queue	= mx3_videobuf_queue,
 	.buf_cleanup	= mx3_videobuf_release,
 	.buf_init	= mx3_videobuf_init,
@@ -514,6 +526,7 @@
 
 	mx3_camera_activate(mx3_cam, icd);
 
+	mx3_cam->buf_total = 0;
 	mx3_cam->icd = icd;
 
 	dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
@@ -548,58 +561,27 @@
 			       unsigned char buswidth, unsigned long *flags)
 {
 	/*
+	 * If requested data width is supported by the platform, use it or any
+	 * possible lower value - i.MX31 is smart enough to shift bits
+	 */
+	if (buswidth > fls(mx3_cam->width_flags))
+		return -EINVAL;
+
+	/*
 	 * Platform specified synchronization and pixel clock polarities are
 	 * only a recommendation and are only used during probing. MX3x
 	 * camera interface only works in master mode, i.e., uses HSYNC and
 	 * VSYNC signals from the sensor
 	 */
-	*flags = SOCAM_MASTER |
-		SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_DATA_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_LOW;
-
-	/*
-	 * If requested data width is supported by the platform, use it or any
-	 * possible lower value - i.MX31 is smart enough to schift bits
-	 */
-	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
-		*flags |= SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_10 |
-			SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
-	else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
-		*flags |= SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8 |
-			SOCAM_DATAWIDTH_4;
-	else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
-		*flags |= SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
-	else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
-		*flags |= SOCAM_DATAWIDTH_4;
-
-	switch (buswidth) {
-	case 15:
-		if (!(*flags & SOCAM_DATAWIDTH_15))
-			return -EINVAL;
-		break;
-	case 10:
-		if (!(*flags & SOCAM_DATAWIDTH_10))
-			return -EINVAL;
-		break;
-	case 8:
-		if (!(*flags & SOCAM_DATAWIDTH_8))
-			return -EINVAL;
-		break;
-	case 4:
-		if (!(*flags & SOCAM_DATAWIDTH_4))
-			return -EINVAL;
-		break;
-	default:
-		dev_warn(mx3_cam->soc_host.v4l2_dev.dev,
-			 "Unsupported bus width %d\n", buswidth);
-		return -EINVAL;
-	}
+	*flags = V4L2_MBUS_MASTER |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_PCLK_SAMPLE_RISING |
+		V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_DATA_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_LOW;
 
 	return 0;
 }
@@ -607,9 +589,11 @@
 static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 				    const unsigned int depth)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
-	unsigned long bus_flags, camera_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long bus_flags, common_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
 	dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
@@ -617,15 +601,21 @@
 	if (ret < 0)
 		return ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  bus_flags);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
+				 cfg.flags, bus_flags);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	}
 
-	ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	if (ret < 0)
-		dev_warn(icd->parent,
-			 "Flags incompatible: camera %lx, host %lx\n",
-			 camera_flags, bus_flags);
-
-	return ret;
+	return 0;
 }
 
 static bool chan_filter(struct dma_chan *chan, void *arg)
@@ -994,9 +984,11 @@
 
 static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
-	unsigned long bus_flags, camera_flags, common_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long bus_flags, common_flags;
 	u32 dw, sens_conf;
 	const struct soc_mbus_pixelfmt *fmt;
 	int buswidth;
@@ -1008,83 +1000,76 @@
 	if (!fmt)
 		return -EINVAL;
 
-	buswidth = fmt->bits_per_sample;
-	ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
-
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
 		dev_warn(dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
+	buswidth = fmt->bits_per_sample;
+	ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
+
 	dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret);
 
 	if (ret < 0)
 		return ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	dev_dbg(dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
-		camera_flags, bus_flags, common_flags);
-	if (!common_flags) {
-		dev_dbg(dev, "no common flags");
-		return -EINVAL;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  bus_flags);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
+				 cfg.flags, bus_flags);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	} else {
+		common_flags = bus_flags;
 	}
 
+	dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n",
+		cfg.flags, bus_flags, common_flags);
+
 	/* Make choices, based on platform preferences */
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
 		if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 		if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_DATA_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
 		if (mx3_cam->platform_flags & MX3_CAMERA_DP)
-			common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
 		if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
 		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
 	}
 
-	/*
-	 * Make the camera work in widest common mode, we'll take care of
-	 * the rest
-	 */
-	if (common_flags & SOCAM_DATAWIDTH_15)
-		common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-			SOCAM_DATAWIDTH_15;
-	else if (common_flags & SOCAM_DATAWIDTH_10)
-		common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-			SOCAM_DATAWIDTH_10;
-	else if (common_flags & SOCAM_DATAWIDTH_8)
-		common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-			SOCAM_DATAWIDTH_8;
-	else
-		common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
-			SOCAM_DATAWIDTH_4;
-
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0) {
-		dev_dbg(dev, "camera set_bus_param(%lx) returned %d\n",
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
 			common_flags, ret);
 		return ret;
 	}
@@ -1108,13 +1093,13 @@
 	/* This has been set in mx3_camera_activate(), but we clear it above */
 	sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
 
-	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
 		sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
-	if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
 		sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
-	if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
 		sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
-	if (common_flags & SOCAM_DATA_ACTIVE_LOW)
+	if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
 		sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
 
 	/* Just do what we're asked to do */
@@ -1199,6 +1184,14 @@
 			 "data widths, using default 8 bit\n");
 		mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
 	}
+	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
+		mx3_cam->width_flags = 1 << 3;
+	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
+		mx3_cam->width_flags |= 1 << 7;
+	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
+		mx3_cam->width_flags |= 1 << 9;
+	if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
+		mx3_cam->width_flags |= 1 << 14;
 
 	mx3_cam->mclk = mx3_cam->pdata->mclk_10khz * 10000;
 	if (!mx3_cam->mclk) {
@@ -1281,8 +1274,6 @@
 
 	dmaengine_put();
 
-	dev_info(&pdev->dev, "i.MX3x Camera driver unloaded\n");
-
 	return 0;
 }
 
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index f0c3968..2e41317 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -29,6 +29,7 @@
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
 #include <media/saa7115.h>
+#include <linux/module.h>
 
 #include "mxb.h"
 #include "tea6415c.h"
diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c
index 6cd21cf..50838bf 100644
--- a/drivers/media/video/noon010pc30.c
+++ b/drivers/media/video/noon010pc30.c
@@ -21,6 +21,7 @@
 #include <media/noon010pc30.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mediabus.h>
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 30d8896b..9c5c19f 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -833,6 +833,15 @@
 /*
  *  File operations
  */
+static unsigned int omap_vout_poll(struct file *file,
+				   struct poll_table_struct *wait)
+{
+	struct omap_vout_device *vout = file->private_data;
+	struct videobuf_queue *q = &vout->vbq;
+
+	return videobuf_poll_stream(file, q, wait);
+}
+
 static void omap_vout_vm_open(struct vm_area_struct *vma)
 {
 	struct omap_vout_device *vout = vma->vm_private_data;
@@ -1861,6 +1870,7 @@
 
 static const struct v4l2_file_operations omap_vout_fops = {
 	.owner 		= THIS_MODULE,
+	.poll		= omap_vout_poll,
 	.unlocked_ioctl	= video_ioctl2,
 	.mmap 		= omap_vout_mmap,
 	.open 		= omap_vout_open,
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 8a947e6..e87ae2f 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -102,10 +102,10 @@
 /* end of OMAP1 Camera Interface registers */
 
 
-#define SOCAM_BUS_FLAGS	(SOCAM_MASTER | \
-			SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | \
-			SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
-			SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8)
+#define SOCAM_BUS_FLAGS	(V4L2_MBUS_MASTER | \
+			V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+			V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+			V4L2_MBUS_DATA_ACTIVE_HIGH)
 
 
 #define FIFO_SIZE		((THRESHOLD_MASK >> THRESHOLD_SHIFT) + 1)
@@ -1438,41 +1438,55 @@
 static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	const struct soc_camera_format_xlate *xlate;
 	const struct soc_mbus_pixelfmt *fmt;
-	unsigned long camera_flags, common_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long common_flags;
 	u32 ctrlclock, mode;
 	int ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	common_flags = soc_camera_bus_param_compatible(camera_flags,
-			SOCAM_BUS_FLAGS);
-	if (!common_flags)
-		return -EINVAL;
-
-	/* Make choices, possibly based on platform configuration */
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-			(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
-		if (!pcdev->pdata ||
-				pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
-		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg, SOCAM_BUS_FLAGS);
+		if (!common_flags) {
+			dev_warn(dev,
+				 "Flags incompatible: camera 0x%x, host 0x%x\n",
+				 cfg.flags, SOCAM_BUS_FLAGS);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	} else {
+		common_flags = SOCAM_BUS_FLAGS;
 	}
 
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
+	/* Make choices, possibly based on platform configuration */
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+			(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
+		if (!pcdev->pdata ||
+				pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+		else
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
+	}
+
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
+			common_flags, ret);
 		return ret;
+	}
 
 	ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
 	if (ctrlclock & LCLK_EN)
 		CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
 
-	if (common_flags & SOCAM_PCLK_SAMPLE_RISING) {
+	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) {
 		dev_dbg(dev, "CTRLCLOCK_REG |= POLCLK\n");
 		ctrlclock |= POLCLK;
 	} else {
@@ -1565,10 +1579,10 @@
 	pcdev->clk = clk;
 
 	pcdev->pdata = pdev->dev.platform_data;
-	pcdev->pflags = pcdev->pdata->flags;
-
-	if (pcdev->pdata)
+	if (pcdev->pdata) {
+		pcdev->pflags = pcdev->pdata->flags;
 		pcdev->camexclk = pcdev->pdata->camexclk_khz * 1000;
+	}
 
 	switch (pcdev->camexclk) {
 	case 6000000:
@@ -1578,6 +1592,7 @@
 	case 24000000:
 		break;
 	default:
+		/* pcdev->camexclk != 0 => pcdev->pdata != NULL */
 		dev_warn(&pdev->dev,
 				"Incorrect sensor clock frequency %ld kHz, "
 				"should be one of 0, 6, 8, 9.6, 12 or 24 MHz, "
@@ -1585,8 +1600,7 @@
 				pcdev->pdata->camexclk_khz);
 		pcdev->camexclk = 0;
 	case 0:
-		dev_info(&pdev->dev,
-				"Not providing sensor clock\n");
+		dev_info(&pdev->dev, "Not providing sensor clock\n");
 	}
 
 	INIT_LIST_HEAD(&pcdev->capture);
@@ -1716,5 +1730,5 @@
 MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
 MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
 MODULE_LICENSE("GPL v2");
-MODULE_LICENSE(DRIVER_VERSION);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index eb97bff..45522e6 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -36,6 +36,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 678e125..b818cac 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -1704,6 +1704,7 @@
 	isp->media_dev.dev = isp->dev;
 	strlcpy(isp->media_dev.model, "TI OMAP3 ISP",
 		sizeof(isp->media_dev.model));
+	isp->media_dev.hw_revision = isp->revision;
 	isp->media_dev.link_notify = isp_pipeline_link_notify;
 	ret = media_device_register(&isp->media_dev);
 	if (ret < 0) {
@@ -2210,6 +2211,8 @@
 	regulator_put(isp->isp_csiphy2.vdd);
 	regulator_put(isp->isp_csiphy1.vdd);
 	platform_set_drvdata(pdev, NULL);
+
+	mutex_destroy(&isp->isp_mutex);
 	kfree(isp);
 
 	return ret;
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 253fdcc..b0b0fa5 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1836,7 +1836,7 @@
 		 * callers to request an output size bigger than the input size
 		 * up to the nearest multiple of 16.
 		 */
-		fmt->width = clamp_t(u32, width, 32, (fmt->width + 15) & ~15);
+		fmt->width = clamp_t(u32, width, 32, fmt->width + 15);
 		fmt->width &= ~15;
 		fmt->height = clamp_t(u32, height, 32, fmt->height);
 		break;
@@ -2152,6 +2152,37 @@
 	.link_setup = ccdc_link_setup,
 };
 
+void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
+{
+	v4l2_device_unregister_subdev(&ccdc->subdev);
+	omap3isp_video_unregister(&ccdc->video_out);
+}
+
+int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
+	struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video node. */
+	ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&ccdc->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_ccdc_unregister_entities(ccdc);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CCDC initialisation and cleanup
+ */
+
 /*
  * ccdc_init_entities - Initialize V4L2 subdev and media entity
  * @ccdc: ISP CCDC module
@@ -2193,50 +2224,23 @@
 
 	ret = omap3isp_video_init(&ccdc->video_out, "CCDC");
 	if (ret < 0)
-		return ret;
+		goto error_video;
 
 	/* Connect the CCDC subdev to the video node. */
 	ret = media_entity_create_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF,
 			&ccdc->video_out.video.entity, 0, 0);
 	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
-{
-	media_entity_cleanup(&ccdc->subdev.entity);
-
-	v4l2_device_unregister_subdev(&ccdc->subdev);
-	omap3isp_video_unregister(&ccdc->video_out);
-}
-
-int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
-	struct v4l2_device *vdev)
-{
-	int ret;
-
-	/* Register the subdev and video node. */
-	ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&ccdc->video_out, vdev);
-	if (ret < 0)
-		goto error;
+		goto error_link;
 
 	return 0;
 
-error:
-	omap3isp_ccdc_unregister_entities(ccdc);
+error_link:
+	omap3isp_video_cleanup(&ccdc->video_out);
+error_video:
+	media_entity_cleanup(me);
 	return ret;
 }
 
-/* -----------------------------------------------------------------------------
- * ISP CCDC initialisation and cleanup
- */
-
 /*
  * omap3isp_ccdc_init - CCDC module initialization.
  * @dev: Device pointer specific to the OMAP3 ISP.
@@ -2248,6 +2252,7 @@
 int omap3isp_ccdc_init(struct isp_device *isp)
 {
 	struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+	int ret;
 
 	spin_lock_init(&ccdc->lock);
 	init_waitqueue_head(&ccdc->wait);
@@ -2276,7 +2281,13 @@
 	ccdc->update = OMAP3ISP_CCDC_BLCLAMP;
 	ccdc_apply_controls(ccdc);
 
-	return ccdc_init_entities(ccdc);
+	ret = ccdc_init_entities(ccdc);
+	if (ret < 0) {
+		mutex_destroy(&ccdc->ioctl_lock);
+		return ret;
+	}
+
+	return 0;
 }
 
 /*
@@ -2287,6 +2298,9 @@
 {
 	struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
 
+	omap3isp_video_cleanup(&ccdc->video_out);
+	media_entity_cleanup(&ccdc->subdev.entity);
+
 	/* Free LSC requests. As the CCDC is stopped there's no active request,
 	 * so only the pending request and the free queue need to be handled.
 	 */
@@ -2296,4 +2310,6 @@
 
 	if (ccdc->fpc.fpcaddr != 0)
 		omap_iommu_vfree(isp->domain, isp->iommu, ccdc->fpc.fpcaddr);
+
+	mutex_destroy(&ccdc->ioctl_lock);
 }
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index fa1d09b..904ca8c 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -1032,6 +1032,48 @@
 };
 
 /*
+ * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
+ * @ccp2: Pointer to ISP CCP2 device
+ */
+void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
+{
+	v4l2_device_unregister_subdev(&ccp2->subdev);
+	omap3isp_video_unregister(&ccp2->video_in);
+}
+
+/*
+ * omap3isp_ccp2_register_entities - Register the subdev media entity
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vdev: Pointer to v4l device
+ * return negative error code or zero on success
+ */
+
+int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
+				    struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&ccp2->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_ccp2_unregister_entities(ccp2);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP ccp2 initialisation and cleanup
+ */
+
+/*
  * ccp2_init_entities - Initialize ccp2 subdev and media entity.
  * @ccp2: Pointer to ISP CCP2 device
  * return negative error code or zero on success
@@ -1083,72 +1125,23 @@
 
 	ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
 	if (ret < 0)
-		return ret;
+		goto error_video;
 
 	/* Connect the video node to the ccp2 subdev. */
 	ret = media_entity_create_link(&ccp2->video_in.video.entity, 0,
 				       &ccp2->subdev.entity, CCP2_PAD_SINK, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	return 0;
-}
 
-/*
- * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
- * @ccp2: Pointer to ISP CCP2 device
- */
-void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
-{
+error_link:
+	omap3isp_video_cleanup(&ccp2->video_in);
+error_video:
 	media_entity_cleanup(&ccp2->subdev.entity);
-
-	v4l2_device_unregister_subdev(&ccp2->subdev);
-	omap3isp_video_unregister(&ccp2->video_in);
-}
-
-/*
- * omap3isp_ccp2_register_entities - Register the subdev media entity
- * @ccp2: Pointer to ISP CCP2 device
- * @vdev: Pointer to v4l device
- * return negative error code or zero on success
- */
-
-int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
-				    struct v4l2_device *vdev)
-{
-	int ret;
-
-	/* Register the subdev and video nodes. */
-	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&ccp2->video_in, vdev);
-	if (ret < 0)
-		goto error;
-
-	return 0;
-
-error:
-	omap3isp_ccp2_unregister_entities(ccp2);
 	return ret;
 }
 
-/* -----------------------------------------------------------------------------
- * ISP ccp2 initialisation and cleanup
- */
-
-/*
- * omap3isp_ccp2_cleanup - CCP2 un-initialization
- * @isp : Pointer to ISP device
- */
-void omap3isp_ccp2_cleanup(struct isp_device *isp)
-{
-	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
-
-	regulator_put(ccp2->vdds_csib);
-}
-
 /*
  * omap3isp_ccp2_init - CCP2 initialization.
  * @isp : Pointer to ISP device
@@ -1184,13 +1177,25 @@
 	}
 
 	ret = ccp2_init_entities(ccp2);
-	if (ret < 0)
-		goto out;
+	if (ret < 0) {
+		regulator_put(ccp2->vdds_csib);
+		return ret;
+	}
 
 	ccp2_reset(ccp2);
-out:
-	if (ret)
-		omap3isp_ccp2_cleanup(isp);
+	return 0;
+}
 
-	return ret;
+/*
+ * omap3isp_ccp2_cleanup - CCP2 un-initialization
+ * @isp : Pointer to ISP device
+ */
+void omap3isp_ccp2_cleanup(struct isp_device *isp)
+{
+	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+
+	omap3isp_video_cleanup(&ccp2->video_in);
+	media_entity_cleanup(&ccp2->subdev.entity);
+
+	regulator_put(ccp2->vdds_csib);
 }
diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c
index 69161a6..0c5f1cb 100644
--- a/drivers/media/video/omap3isp/ispcsi2.c
+++ b/drivers/media/video/omap3isp/ispcsi2.c
@@ -1187,6 +1187,37 @@
 	.link_setup = csi2_link_setup,
 };
 
+void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
+{
+	v4l2_device_unregister_subdev(&csi2->subdev);
+	omap3isp_video_unregister(&csi2->video_out);
+}
+
+int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
+				    struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&csi2->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_csi2_unregister_entities(csi2);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CSI2 initialisation and cleanup
+ */
+
 /*
  * csi2_init_entities - Initialize subdev and media entity.
  * @csi2: Pointer to csi2 structure.
@@ -1228,57 +1259,23 @@
 
 	ret = omap3isp_video_init(&csi2->video_out, "CSI2a");
 	if (ret < 0)
-		return ret;
+		goto error_video;
 
 	/* Connect the CSI2 subdev to the video node. */
 	ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE,
 				       &csi2->video_out.video.entity, 0, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	return 0;
-}
 
-void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
-{
+error_link:
+	omap3isp_video_cleanup(&csi2->video_out);
+error_video:
 	media_entity_cleanup(&csi2->subdev.entity);
-
-	v4l2_device_unregister_subdev(&csi2->subdev);
-	omap3isp_video_unregister(&csi2->video_out);
-}
-
-int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
-				    struct v4l2_device *vdev)
-{
-	int ret;
-
-	/* Register the subdev and video nodes. */
-	ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&csi2->video_out, vdev);
-	if (ret < 0)
-		goto error;
-
-	return 0;
-
-error:
-	omap3isp_csi2_unregister_entities(csi2);
 	return ret;
 }
 
-/* -----------------------------------------------------------------------------
- * ISP CSI2 initialisation and cleanup
- */
-
-/*
- * omap3isp_csi2_cleanup - Routine for module driver cleanup
- */
-void omap3isp_csi2_cleanup(struct isp_device *isp)
-{
-}
-
 /*
  * omap3isp_csi2_init - Routine for module driver init
  */
@@ -1298,7 +1295,7 @@
 
 	ret = csi2_init_entities(csi2a);
 	if (ret < 0)
-		goto fail;
+		return ret;
 
 	if (isp->revision == ISP_REVISION_15_0) {
 		csi2c->isp = isp;
@@ -1311,7 +1308,15 @@
 	}
 
 	return 0;
-fail:
-	omap3isp_csi2_cleanup(isp);
-	return ret;
+}
+
+/*
+ * omap3isp_csi2_cleanup - Routine for module driver cleanup
+ */
+void omap3isp_csi2_cleanup(struct isp_device *isp)
+{
+	struct isp_csi2_device *csi2a = &isp->isp_csi2a;
+
+	omap3isp_video_cleanup(&csi2a->video_out);
+	media_entity_cleanup(&csi2a->subdev.entity);
 }
diff --git a/drivers/media/video/omap3isp/isph3a_aewb.c b/drivers/media/video/omap3isp/isph3a_aewb.c
index 8068cef..a3c76bf 100644
--- a/drivers/media/video/omap3isp/isph3a_aewb.c
+++ b/drivers/media/video/omap3isp/isph3a_aewb.c
@@ -370,5 +370,5 @@
 {
 	kfree(isp->isp_aewb.priv);
 	kfree(isp->isp_aewb.recover_priv);
-	omap3isp_stat_free(&isp->isp_aewb);
+	omap3isp_stat_cleanup(&isp->isp_aewb);
 }
diff --git a/drivers/media/video/omap3isp/isph3a_af.c b/drivers/media/video/omap3isp/isph3a_af.c
index ba54d0a..58e0bc4 100644
--- a/drivers/media/video/omap3isp/isph3a_af.c
+++ b/drivers/media/video/omap3isp/isph3a_af.c
@@ -425,5 +425,5 @@
 {
 	kfree(isp->isp_af.priv);
 	kfree(isp->isp_af.recover_priv);
-	omap3isp_stat_free(&isp->isp_af);
+	omap3isp_stat_cleanup(&isp->isp_af);
 }
diff --git a/drivers/media/video/omap3isp/isphist.c b/drivers/media/video/omap3isp/isphist.c
index 1743856..1163907 100644
--- a/drivers/media/video/omap3isp/isphist.c
+++ b/drivers/media/video/omap3isp/isphist.c
@@ -516,5 +516,5 @@
 	if (HIST_USING_DMA(&isp->isp_hist))
 		omap_free_dma(isp->isp_hist.dma_ch);
 	kfree(isp->isp_hist.priv);
-	omap3isp_stat_free(&isp->isp_hist);
+	omap3isp_stat_cleanup(&isp->isp_hist);
 }
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index aba537a..ccb876f 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -76,9 +76,51 @@
 
 #define DEF_DETECT_CORRECT_VAL	0xe
 
-#define PREV_MIN_WIDTH		64
-#define PREV_MIN_HEIGHT		8
-#define PREV_MAX_HEIGHT		16384
+/*
+ * Margins and image size limits.
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which filters are enabled. To avoid format changes when the filters are
+ * enabled or disabled (which would prevent them from being turned on or off
+ * during streaming), the driver assumes all the filters are enabled when
+ * computing sink crop and source format limits.
+ *
+ * If a filter is disabled, additional cropping is automatically added at the
+ * preview engine input by the driver to avoid overflow at line and frame end.
+ * This is completely transparent for applications.
+ *
+ * Median filter		4 pixels
+ * Noise filter,
+ * Faulty pixels correction	4 pixels, 4 lines
+ * CFA filter			4 pixels, 4 lines in Bayer mode
+ *					  2 lines in other modes
+ * Color suppression		2 pixels
+ * or luma enhancement
+ * -------------------------------------------------------------
+ * Maximum total		14 pixels, 8 lines
+ *
+ * The color suppression and luma enhancement filters are applied after bayer to
+ * YUV conversion. They thus can crop one pixel on the left and one pixel on the
+ * right side of the image without changing the color pattern. When both those
+ * filters are disabled, the driver must crop the two pixels on the same side of
+ * the image to avoid changing the bayer pattern. The left margin is thus set to
+ * 8 pixels and the right margin to 6 pixels.
+ */
+
+#define PREV_MARGIN_LEFT	8
+#define PREV_MARGIN_RIGHT	6
+#define PREV_MARGIN_TOP		4
+#define PREV_MARGIN_BOTTOM	4
+
+#define PREV_MIN_IN_WIDTH	64
+#define PREV_MIN_IN_HEIGHT	8
+#define PREV_MAX_IN_HEIGHT	16384
+
+#define PREV_MIN_OUT_WIDTH	0
+#define PREV_MIN_OUT_HEIGHT	0
+#define PREV_MAX_OUT_WIDTH	1280
+#define PREV_MAX_OUT_WIDTH_ES2	3300
+#define PREV_MAX_OUT_WIDTH_3630	4096
 
 /*
  * Coeficient Tables for the submodules in Preview.
@@ -979,52 +1021,36 @@
  * enabled when reporting source pad formats to userspace. If this assumption is
  * not true, rows and columns must be manually cropped at the preview engine
  * input to avoid overflows at the end of lines and frames.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
  */
 static void preview_config_input_size(struct isp_prev_device *prev)
 {
 	struct isp_device *isp = to_isp_device(prev);
 	struct prev_params *params = &prev->params;
-	struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
-	unsigned int sph = 0;
-	unsigned int eph = format->width - 1;
-	unsigned int slv = 0;
-	unsigned int elv = format->height - 1;
+	unsigned int sph = prev->crop.left;
+	unsigned int eph = prev->crop.left + prev->crop.width - 1;
+	unsigned int slv = prev->crop.top;
+	unsigned int elv = prev->crop.top + prev->crop.height - 1;
 
-	if (prev->input == PREVIEW_INPUT_CCDC) {
-		sph += 2;
-		eph -= 2;
+	if (params->features & PREV_CFA) {
+		sph -= 2;
+		eph += 2;
+		slv -= 2;
+		elv += 2;
 	}
-
-	/*
-	 * Median filter	4 pixels
-	 * Noise filter		4 pixels, 4 lines
-	 * or faulty pixels correction
-	 * CFA filter		4 pixels, 4 lines in Bayer mode
-	 *				  2 lines in other modes
-	 * Color suppression	2 pixels
-	 * or luma enhancement
-	 * -------------------------------------------------------------
-	 * Maximum total	14 pixels, 8 lines
-	 */
-
-	if (!(params->features & PREV_CFA)) {
-		sph += 2;
-		eph -= 2;
-		slv += 2;
-		elv -= 2;
+	if (params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER)) {
+		sph -= 2;
+		eph += 2;
+		slv -= 2;
+		elv += 2;
 	}
-	if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) {
-		sph += 2;
-		eph -= 2;
-		slv += 2;
-		elv -= 2;
+	if (params->features & PREV_HORZ_MEDIAN_FILTER) {
+		sph -= 2;
+		eph += 2;
 	}
-	if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) {
-		sph += 2;
-		eph -= 2;
-	}
-	if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE)))
-		sph += 2;
+	if (params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE))
+		sph -= 2;
 
 	isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
@@ -1228,7 +1254,6 @@
 	/* Init values */
 	params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
 	params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
-	params->average = NO_AVE;
 	params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
 	memcpy(params->cfa.table, cfa_coef_table,
 	       sizeof(params->cfa.table));
@@ -1281,14 +1306,14 @@
 
 	switch (isp->revision) {
 	case ISP_REVISION_1_0:
-		return ISPPRV_MAXOUTPUT_WIDTH;
+		return PREV_MAX_OUT_WIDTH;
 
 	case ISP_REVISION_2_0:
 	default:
-		return ISPPRV_MAXOUTPUT_WIDTH_ES2;
+		return PREV_MAX_OUT_WIDTH_ES2;
 
 	case ISP_REVISION_15_0:
-		return ISPPRV_MAXOUTPUT_WIDTH_3630;
+		return PREV_MAX_OUT_WIDTH_3630;
 	}
 }
 
@@ -1296,8 +1321,6 @@
 {
 	struct isp_device *isp = to_isp_device(prev);
 	struct v4l2_mbus_framefmt *format;
-	unsigned int max_out_width;
-	unsigned int format_avg;
 
 	preview_setup_hw(prev);
 
@@ -1335,10 +1358,7 @@
 		preview_config_outlineoffset(prev,
 				ALIGN(format->width, 0x10) * 2);
 
-	max_out_width = preview_max_out_width(prev);
-
-	format_avg = fls(DIV_ROUND_UP(format->width, max_out_width) - 1);
-	preview_config_averager(prev, format_avg);
+	preview_config_averager(prev, 0);
 	preview_config_ycpos(prev, format->code);
 }
 
@@ -1597,6 +1617,16 @@
 		return &prev->formats[pad];
 }
 
+static struct v4l2_rect *
+__preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+		   enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_crop(fh, PREV_PAD_SINK);
+	else
+		return &prev->crop;
+}
+
 /* previewer format descriptions */
 static const unsigned int preview_input_fmts[] = {
 	V4L2_MBUS_FMT_SGRBG10_1X10,
@@ -1611,24 +1641,25 @@
 };
 
 /*
- * preview_try_format - Handle try format by pad subdev method
- * @prev: ISP preview device
- * @fh : V4L2 subdev file handle
- * @pad: pad num
- * @fmt: pointer to v4l2 format structure
+ * preview_try_format - Validate a format
+ * @prev: ISP preview engine
+ * @fh: V4L2 subdev file handle
+ * @pad: pad number
+ * @fmt: format to be validated
+ * @which: try/active format selector
+ *
+ * Validate and adjust the given format for the given pad based on the preview
+ * engine limits and the format and crop rectangles on other pads.
  */
 static void preview_try_format(struct isp_prev_device *prev,
 			       struct v4l2_subdev_fh *fh, unsigned int pad,
 			       struct v4l2_mbus_framefmt *fmt,
 			       enum v4l2_subdev_format_whence which)
 {
-	struct v4l2_mbus_framefmt *format;
-	unsigned int max_out_width;
 	enum v4l2_mbus_pixelcode pixelcode;
+	struct v4l2_rect *crop;
 	unsigned int i;
 
-	max_out_width = preview_max_out_width(prev);
-
 	switch (pad) {
 	case PREV_PAD_SINK:
 		/* When reading data from the CCDC, the input size has already
@@ -1641,10 +1672,11 @@
 		 * filter array interpolation.
 		 */
 		if (prev->input == PREVIEW_INPUT_MEMORY) {
-			fmt->width = clamp_t(u32, fmt->width, PREV_MIN_WIDTH,
-					     max_out_width * 8);
-			fmt->height = clamp_t(u32, fmt->height, PREV_MIN_HEIGHT,
-					      PREV_MAX_HEIGHT);
+			fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH,
+					     preview_max_out_width(prev));
+			fmt->height = clamp_t(u32, fmt->height,
+					      PREV_MIN_IN_HEIGHT,
+					      PREV_MAX_IN_HEIGHT);
 		}
 
 		fmt->colorspace = V4L2_COLORSPACE_SRGB;
@@ -1661,15 +1693,8 @@
 
 	case PREV_PAD_SOURCE:
 		pixelcode = fmt->code;
-		format = __preview_get_format(prev, fh, PREV_PAD_SINK, which);
-		memcpy(fmt, format, sizeof(*fmt));
+		*fmt = *__preview_get_format(prev, fh, PREV_PAD_SINK, which);
 
-		/* The preview module output size is configurable through the
-		 * input interface (horizontal and vertical cropping) and the
-		 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In
-		 * spite of this, hardcode the output size to the biggest
-		 * possible value for simplicity reasons.
-		 */
 		switch (pixelcode) {
 		case V4L2_MBUS_FMT_YUYV8_1X16:
 		case V4L2_MBUS_FMT_UYVY8_1X16:
@@ -1681,31 +1706,14 @@
 			break;
 		}
 
-		/* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped
-		 * from the left and right sides when the input source is the
-		 * CCDC. This seems not to be needed in practice, investigation
-		 * is required.
+		/* The preview module output size is configurable through the
+		 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This
+		 * is not supported yet, hardcode the output size to the crop
+		 * rectangle size.
 		 */
-		if (prev->input == PREVIEW_INPUT_CCDC)
-			fmt->width -= 4;
-
-		/* The preview module can output a maximum of 3312 pixels
-		 * horizontally due to fixed memory-line sizes. Compute the
-		 * horizontal averaging factor accordingly. Note that the limit
-		 * applies to the noise filter and CFA interpolation blocks, so
-		 * it doesn't take cropping by further blocks into account.
-		 *
-		 * ES 1.0 hardware revision is limited to 1280 pixels
-		 * horizontally.
-		 */
-		fmt->width >>= fls(DIV_ROUND_UP(fmt->width, max_out_width) - 1);
-
-		/* Assume that all blocks are enabled and crop pixels and lines
-		 * accordingly. See preview_config_input_size() for more
-		 * information.
-		 */
-		fmt->width -= 14;
-		fmt->height -= 8;
+		crop = __preview_get_crop(prev, fh, which);
+		fmt->width = crop->width;
+		fmt->height = crop->height;
 
 		fmt->colorspace = V4L2_COLORSPACE_JPEG;
 		break;
@@ -1715,6 +1723,49 @@
 }
 
 /*
+ * preview_try_crop - Validate a crop rectangle
+ * @prev: ISP preview engine
+ * @sink: format on the sink pad
+ * @crop: crop rectangle to be validated
+ *
+ * The preview engine crops lines and columns for its internal operation,
+ * depending on which filters are enabled. Enforce minimum crop margins to
+ * handle that transparently for userspace.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
+ */
+static void preview_try_crop(struct isp_prev_device *prev,
+			     const struct v4l2_mbus_framefmt *sink,
+			     struct v4l2_rect *crop)
+{
+	unsigned int left = PREV_MARGIN_LEFT;
+	unsigned int right = sink->width - PREV_MARGIN_RIGHT;
+	unsigned int top = PREV_MARGIN_TOP;
+	unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM;
+
+	/* When processing data on-the-fly from the CCDC, at least 2 pixels must
+	 * be cropped from the left and right sides of the image. As we don't
+	 * know which filters will be enabled, increase the left and right
+	 * margins by two.
+	 */
+	if (prev->input == PREVIEW_INPUT_CCDC) {
+		left += 2;
+		right -= 2;
+	}
+
+	/* Restrict left/top to even values to keep the Bayer pattern. */
+	crop->left &= ~1;
+	crop->top &= ~1;
+
+	crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH);
+	crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT);
+	crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH,
+			      right - crop->left);
+	crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT,
+			       bottom - crop->top);
+}
+
+/*
  * preview_enum_mbus_code - Handle pixel format enumeration
  * @sd     : pointer to v4l2 subdev structure
  * @fh     : V4L2 subdev file handle
@@ -1776,6 +1827,60 @@
 }
 
 /*
+ * preview_get_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_crop *crop)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	/* Cropping is only supported on the sink pad. */
+	if (crop->pad != PREV_PAD_SINK)
+		return -EINVAL;
+
+	crop->rect = *__preview_get_crop(prev, fh, crop->which);
+	return 0;
+}
+
+/*
+ * preview_set_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_crop *crop)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	/* Cropping is only supported on the sink pad. */
+	if (crop->pad != PREV_PAD_SINK)
+		return -EINVAL;
+
+	/* The crop rectangle can't be changed while streaming. */
+	if (prev->state != ISP_PIPELINE_STREAM_STOPPED)
+		return -EBUSY;
+
+	format = __preview_get_format(prev, fh, PREV_PAD_SINK, crop->which);
+	preview_try_crop(prev, format, &crop->rect);
+	*__preview_get_crop(prev, fh, crop->which) = crop->rect;
+
+	/* Update the source format. */
+	format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, crop->which);
+	preview_try_format(prev, fh, PREV_PAD_SOURCE, format, crop->which);
+
+	return 0;
+}
+
+/*
  * preview_get_format - Handle get format by pads subdev method
  * @sd : pointer to v4l2 subdev structure
  * @fh : V4L2 subdev file handle
@@ -1808,6 +1913,7 @@
 {
 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
 	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *crop;
 
 	format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
 	if (format == NULL)
@@ -1818,9 +1924,18 @@
 
 	/* Propagate the format from sink to source */
 	if (fmt->pad == PREV_PAD_SINK) {
+		/* Reset the crop rectangle. */
+		crop = __preview_get_crop(prev, fh, fmt->which);
+		crop->left = 0;
+		crop->top = 0;
+		crop->width = fmt->format.width;
+		crop->height = fmt->format.height;
+
+		preview_try_crop(prev, &fmt->format, crop);
+
+		/* Update the source format. */
 		format = __preview_get_format(prev, fh, PREV_PAD_SOURCE,
 					      fmt->which);
-		*format = fmt->format;
 		preview_try_format(prev, fh, PREV_PAD_SOURCE, format,
 				   fmt->which);
 	}
@@ -1869,6 +1984,8 @@
 	.enum_frame_size = preview_enum_frame_size,
 	.get_fmt = preview_get_format,
 	.set_fmt = preview_set_format,
+	.get_crop = preview_get_crop,
+	.set_crop = preview_set_crop,
 };
 
 /* subdev operations */
@@ -1966,8 +2083,44 @@
 	.link_setup = preview_link_setup,
 };
 
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
+{
+	v4l2_device_unregister_subdev(&prev->subdev);
+	omap3isp_video_unregister(&prev->video_in);
+	omap3isp_video_unregister(&prev->video_out);
+}
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prev,
+	struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_preview_unregister_entities(prev);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP previewer initialisation and cleanup
+ */
+
 /*
- * review_init_entities - Initialize subdev and media entity.
+ * preview_init_entities - Initialize subdev and media entity.
  * @prev : Pointer to preview structure
  * return -ENOMEM or zero on success
  */
@@ -2024,69 +2177,34 @@
 
 	ret = omap3isp_video_init(&prev->video_in, "preview");
 	if (ret < 0)
-		return ret;
+		goto error_video_in;
 
 	ret = omap3isp_video_init(&prev->video_out, "preview");
 	if (ret < 0)
-		return ret;
+		goto error_video_out;
 
 	/* Connect the video nodes to the previewer subdev. */
 	ret = media_entity_create_link(&prev->video_in.video.entity, 0,
 			&prev->subdev.entity, PREV_PAD_SINK, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE,
 			&prev->video_out.video.entity, 0, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	return 0;
-}
 
-void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
-{
+error_link:
+	omap3isp_video_cleanup(&prev->video_out);
+error_video_out:
+	omap3isp_video_cleanup(&prev->video_in);
+error_video_in:
 	media_entity_cleanup(&prev->subdev.entity);
-
-	v4l2_device_unregister_subdev(&prev->subdev);
-	v4l2_ctrl_handler_free(&prev->ctrls);
-	omap3isp_video_unregister(&prev->video_in);
-	omap3isp_video_unregister(&prev->video_out);
-}
-
-int omap3isp_preview_register_entities(struct isp_prev_device *prev,
-	struct v4l2_device *vdev)
-{
-	int ret;
-
-	/* Register the subdev and video nodes. */
-	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&prev->video_in, vdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&prev->video_out, vdev);
-	if (ret < 0)
-		goto error;
-
-	return 0;
-
-error:
-	omap3isp_preview_unregister_entities(prev);
 	return ret;
 }
 
-/* -----------------------------------------------------------------------------
- * ISP previewer initialisation and cleanup
- */
-
-void omap3isp_preview_cleanup(struct isp_device *isp)
-{
-}
-
 /*
  * isp_preview_init - Previewer initialization.
  * @dev : Pointer to ISP device
@@ -2095,19 +2213,20 @@
 int omap3isp_preview_init(struct isp_device *isp)
 {
 	struct isp_prev_device *prev = &isp->isp_prev;
-	int ret;
 
 	spin_lock_init(&prev->lock);
 	init_waitqueue_head(&prev->wait);
 	preview_init_params(prev);
 
-	ret = preview_init_entities(prev);
-	if (ret < 0)
-		goto out;
+	return preview_init_entities(prev);
+}
 
-out:
-	if (ret)
-		omap3isp_preview_cleanup(isp);
+void omap3isp_preview_cleanup(struct isp_device *isp)
+{
+	struct isp_prev_device *prev = &isp->isp_prev;
 
-	return ret;
+	v4l2_ctrl_handler_free(&prev->ctrls);
+	omap3isp_video_cleanup(&prev->video_in);
+	omap3isp_video_cleanup(&prev->video_out);
+	media_entity_cleanup(&prev->subdev.entity);
 }
diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h
index fa943bd..f54e775 100644
--- a/drivers/media/video/omap3isp/isppreview.h
+++ b/drivers/media/video/omap3isp/isppreview.h
@@ -45,11 +45,6 @@
 #define ISPPRV_CONTRAST_HIGH		0xFF
 #define ISPPRV_CONTRAST_UNITS		0x1
 
-#define NO_AVE				0x0
-#define AVE_2_PIX			0x1
-#define AVE_4_PIX			0x2
-#define AVE_8_PIX			0x3
-
 /* Features list */
 #define PREV_LUMA_ENHANCE		OMAP3ISP_PREV_LUMAENH
 #define PREV_INVERSE_ALAW		OMAP3ISP_PREV_INVALAW
@@ -106,7 +101,6 @@
  * @rgb2ycbcr: RGB to ycbcr parameters.
  * @hmed: Horizontal median filter.
  * @yclimit: YC limits parameters.
- * @average: Downsampling rate for averager.
  * @contrast: Contrast.
  * @brightness: Brightness.
  */
@@ -124,7 +118,6 @@
 	struct omap3isp_prev_csc rgb2ycbcr;
 	struct omap3isp_prev_hmed hmed;
 	struct omap3isp_prev_yclimit yclimit;
-	u8 average;
 	u8 contrast;
 	u8 brightness;
 };
@@ -159,6 +152,7 @@
  * @subdev: V4L2 subdevice
  * @pads: Media entity pads
  * @formats: Active formats at the subdev pad
+ * @crop: Active crop rectangle
  * @input: Module currently connected to the input pad
  * @output: Bitmask of the active output
  * @video_in: Input video entity
@@ -177,6 +171,7 @@
 	struct v4l2_subdev subdev;
 	struct media_pad pads[PREV_PADS_NUM];
 	struct v4l2_mbus_framefmt formats[PREV_PADS_NUM];
+	struct v4l2_rect crop;
 
 	struct v4l2_ctrl_handler ctrls;
 
diff --git a/drivers/media/video/omap3isp/ispreg.h b/drivers/media/video/omap3isp/ispreg.h
index 69f6af6..084ea77 100644
--- a/drivers/media/video/omap3isp/ispreg.h
+++ b/drivers/media/video/omap3isp/ispreg.h
@@ -402,9 +402,6 @@
 #define ISPPRV_YENH_TABLE_ADDR		0x1000
 #define ISPPRV_CFA_TABLE_ADDR		0x1400
 
-#define ISPPRV_MAXOUTPUT_WIDTH		1280
-#define ISPPRV_MAXOUTPUT_WIDTH_ES2	3300
-#define ISPPRV_MAXOUTPUT_WIDTH_3630	4096
 #define ISPRSZ_MIN_OUTPUT		64
 #define ISPRSZ_MAX_OUTPUT		3312
 
diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 0bb0f8c..50e593b 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -1608,6 +1608,42 @@
 	.link_setup = resizer_link_setup,
 };
 
+void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
+{
+	v4l2_device_unregister_subdev(&res->subdev);
+	omap3isp_video_unregister(&res->video_in);
+	omap3isp_video_unregister(&res->video_out);
+}
+
+int omap3isp_resizer_register_entities(struct isp_res_device *res,
+				       struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &res->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&res->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&res->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_resizer_unregister_entities(res);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP resizer initialization and cleanup
+ */
+
 /*
  * resizer_init_entities - Initialize resizer subdev and media entity.
  * @res : Pointer to resizer device structure
@@ -1652,68 +1688,34 @@
 
 	ret = omap3isp_video_init(&res->video_in, "resizer");
 	if (ret < 0)
-		return ret;
+		goto error_video_in;
 
 	ret = omap3isp_video_init(&res->video_out, "resizer");
 	if (ret < 0)
-		return ret;
+		goto error_video_out;
 
 	/* Connect the video nodes to the resizer subdev. */
 	ret = media_entity_create_link(&res->video_in.video.entity, 0,
 			&res->subdev.entity, RESZ_PAD_SINK, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	ret = media_entity_create_link(&res->subdev.entity, RESZ_PAD_SOURCE,
 			&res->video_out.video.entity, 0, 0);
 	if (ret < 0)
-		return ret;
+		goto error_link;
 
 	return 0;
-}
 
-void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
-{
+error_link:
+	omap3isp_video_cleanup(&res->video_out);
+error_video_out:
+	omap3isp_video_cleanup(&res->video_in);
+error_video_in:
 	media_entity_cleanup(&res->subdev.entity);
-
-	v4l2_device_unregister_subdev(&res->subdev);
-	omap3isp_video_unregister(&res->video_in);
-	omap3isp_video_unregister(&res->video_out);
-}
-
-int omap3isp_resizer_register_entities(struct isp_res_device *res,
-				       struct v4l2_device *vdev)
-{
-	int ret;
-
-	/* Register the subdev and video nodes. */
-	ret = v4l2_device_register_subdev(vdev, &res->subdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&res->video_in, vdev);
-	if (ret < 0)
-		goto error;
-
-	ret = omap3isp_video_register(&res->video_out, vdev);
-	if (ret < 0)
-		goto error;
-
-	return 0;
-
-error:
-	omap3isp_resizer_unregister_entities(res);
 	return ret;
 }
 
-/* -----------------------------------------------------------------------------
- * ISP resizer initialization and cleanup
- */
-
-void omap3isp_resizer_cleanup(struct isp_device *isp)
-{
-}
-
 /*
  * isp_resizer_init - Resizer initialization.
  * @isp : Pointer to ISP device
@@ -1722,17 +1724,17 @@
 int omap3isp_resizer_init(struct isp_device *isp)
 {
 	struct isp_res_device *res = &isp->isp_res;
-	int ret;
 
 	init_waitqueue_head(&res->wait);
 	atomic_set(&res->stopping, 0);
-	ret = resizer_init_entities(res);
-	if (ret < 0)
-		goto out;
+	return resizer_init_entities(res);
+}
 
-out:
-	if (ret)
-		omap3isp_resizer_cleanup(isp);
+void omap3isp_resizer_cleanup(struct isp_device *isp)
+{
+	struct isp_res_device *res = &isp->isp_res;
 
-	return ret;
+	omap3isp_video_cleanup(&res->video_in);
+	omap3isp_video_cleanup(&res->video_out);
+	media_entity_cleanup(&res->subdev.entity);
 }
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index 7329055..68d5394 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -1023,24 +1023,6 @@
 	__stat_isr(stat, 1);
 }
 
-static int isp_stat_init_entities(struct ispstat *stat, const char *name,
-				  const struct v4l2_subdev_ops *sd_ops)
-{
-	struct v4l2_subdev *subdev = &stat->subdev;
-	struct media_entity *me = &subdev->entity;
-
-	v4l2_subdev_init(subdev, sd_ops);
-	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
-	subdev->grp_id = 1 << 16;	/* group ID for isp subdevs */
-	subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
-	v4l2_set_subdevdata(subdev, stat);
-
-	stat->pad.flags = MEDIA_PAD_FL_SINK;
-	me->ops = NULL;
-
-	return media_entity_init(me, 1, &stat->pad, 0);
-}
-
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
 				  struct v4l2_event_subscription *sub)
@@ -1062,7 +1044,6 @@
 
 void omap3isp_stat_unregister_entities(struct ispstat *stat)
 {
-	media_entity_cleanup(&stat->subdev.entity);
 	v4l2_device_unregister_subdev(&stat->subdev);
 }
 
@@ -1072,21 +1053,50 @@
 	return v4l2_device_register_subdev(vdev, &stat->subdev);
 }
 
+static int isp_stat_init_entities(struct ispstat *stat, const char *name,
+				  const struct v4l2_subdev_ops *sd_ops)
+{
+	struct v4l2_subdev *subdev = &stat->subdev;
+	struct media_entity *me = &subdev->entity;
+
+	v4l2_subdev_init(subdev, sd_ops);
+	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
+	subdev->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
+	v4l2_set_subdevdata(subdev, stat);
+
+	stat->pad.flags = MEDIA_PAD_FL_SINK;
+	me->ops = NULL;
+
+	return media_entity_init(me, 1, &stat->pad, 0);
+}
+
 int omap3isp_stat_init(struct ispstat *stat, const char *name,
 		       const struct v4l2_subdev_ops *sd_ops)
 {
+	int ret;
+
 	stat->buf = kcalloc(STAT_MAX_BUFS, sizeof(*stat->buf), GFP_KERNEL);
 	if (!stat->buf)
 		return -ENOMEM;
+
 	isp_stat_buf_clear(stat);
 	mutex_init(&stat->ioctl_lock);
 	atomic_set(&stat->buf_err, 0);
 
-	return isp_stat_init_entities(stat, name, sd_ops);
+	ret = isp_stat_init_entities(stat, name, sd_ops);
+	if (ret < 0) {
+		mutex_destroy(&stat->ioctl_lock);
+		kfree(stat->buf);
+	}
+
+	return ret;
 }
 
-void omap3isp_stat_free(struct ispstat *stat)
+void omap3isp_stat_cleanup(struct ispstat *stat)
 {
+	media_entity_cleanup(&stat->subdev.entity);
+	mutex_destroy(&stat->ioctl_lock);
 	isp_stat_bufs_free(stat);
 	kfree(stat->buf);
 }
diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h
index d86da94..9b7c865 100644
--- a/drivers/media/video/omap3isp/ispstat.h
+++ b/drivers/media/video/omap3isp/ispstat.h
@@ -144,7 +144,7 @@
 				     struct omap3isp_stat_data *data);
 int omap3isp_stat_init(struct ispstat *stat, const char *name,
 		       const struct v4l2_subdev_ops *sd_ops);
-void omap3isp_stat_free(struct ispstat *stat);
+void omap3isp_stat_cleanup(struct ispstat *stat);
 int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 				  struct v4l2_fh *fh,
 				  struct v4l2_event_subscription *sub);
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 0cb8a9f..d100072 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -1325,6 +1325,13 @@
 	return 0;
 }
 
+void omap3isp_video_cleanup(struct isp_video *video)
+{
+	media_entity_cleanup(&video->video.entity);
+	mutex_destroy(&video->stream_lock);
+	mutex_destroy(&video->mutex);
+}
+
 int omap3isp_video_register(struct isp_video *video, struct v4l2_device *vdev)
 {
 	int ret;
@@ -1341,8 +1348,6 @@
 
 void omap3isp_video_unregister(struct isp_video *video)
 {
-	if (video_is_registered(&video->video)) {
-		media_entity_cleanup(&video->video.entity);
+	if (video_is_registered(&video->video))
 		video_unregister_device(&video->video);
-	}
 }
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 53160aa..08cbfa1 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -190,6 +190,7 @@
 				container_of(q, struct isp_video_fh, queue)
 
 int omap3isp_video_init(struct isp_video *video, const char *name);
+void omap3isp_video_cleanup(struct isp_video *video);
 int omap3isp_video_register(struct isp_video *video,
 			    struct v4l2_device *vdev);
 void omap3isp_video_unregister(struct isp_video *video);
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 9ce2fa0..b5247cb 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -18,11 +18,13 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-subdev.h>
-#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
+#include <media/v4l2-ctrls.h>
 
 #define VAL_SET(x, mask, rshift, lshift)  \
 		((((x) >> rshift) & mask) << lshift)
@@ -299,12 +301,10 @@
 
 struct ov2640_priv {
 	struct v4l2_subdev		subdev;
-	struct ov2640_camera_info	*info;
+	struct v4l2_ctrl_handler	hdl;
 	enum v4l2_mbus_pixelcode	cfmt_code;
 	const struct ov2640_win_size	*win;
 	int				model;
-	u16				flag_vflip:1;
-	u16				flag_hflip:1;
 };
 
 /*
@@ -610,29 +610,6 @@
 };
 
 /*
- * Supported controls
- */
-static const struct v4l2_queryctrl ov2640_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
-/*
  * General functions
  */
 static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
@@ -701,81 +678,23 @@
 	return 0;
 }
 
-static int ov2640_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
+static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
-	/* Only one width bit may be set */
-	if (!is_power_of_2(width_flag))
-		return -EINVAL;
-
-	if (icl->set_bus_param)
-		return icl->set_bus_param(icl, width_flag);
-
-	/*
-	 * Without board specific bus width settings we support only the
-	 * sensors native bus width witch are tested working
-	 */
-	if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
-		return 0;
-
-	return 0;
-}
-
-static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (icl->query_bus_param)
-		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
+	struct v4l2_subdev *sd =
+		&container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev;
 	struct i2c_client  *client = v4l2_get_subdevdata(sd);
-	struct ov2640_priv *priv = to_ov2640(client);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	}
-	return 0;
-}
-
-static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct i2c_client  *client = v4l2_get_subdevdata(sd);
-	struct ov2640_priv *priv = to_ov2640(client);
-	int ret = 0;
 	u8 val;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
-		priv->flag_vflip = ctrl->value ? 1 : 0;
-		ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
-		break;
+		val = ctrl->val ? REG04_VFLIP_IMG : 0x00;
+		return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
 	case V4L2_CID_HFLIP:
-		val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
-		priv->flag_hflip = ctrl->value ? 1 : 0;
-		ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
-		break;
+		val = ctrl->val ? REG04_HFLIP_IMG : 0x00;
+		return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
@@ -1023,18 +942,13 @@
 	return 0;
 }
 
-static int ov2640_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int ov2640_video_probe(struct i2c_client *client)
 {
 	struct ov2640_priv *priv = to_ov2640(client);
 	u8 pid, ver, midh, midl;
 	const char *devname;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -1060,22 +974,17 @@
 		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
 		 devname, pid, ver, midh, midl);
 
-	return 0;
+	return v4l2_ctrl_handler_setup(&priv->hdl);
 
 err:
 	return ret;
 }
 
-static struct soc_camera_ops ov2640_ops = {
-	.set_bus_param		= ov2640_set_bus_param,
-	.query_bus_param	= ov2640_query_bus_param,
-	.controls		= ov2640_controls,
-	.num_controls		= ARRAY_SIZE(ov2640_controls),
+static const struct v4l2_ctrl_ops ov2640_ctrl_ops = {
+	.s_ctrl = ov2640_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
-	.g_ctrl		= ov2640_g_ctrl,
-	.s_ctrl		= ov2640_s_ctrl,
 	.g_chip_ident	= ov2640_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= ov2640_g_register,
@@ -1083,6 +992,21 @@
 #endif
 };
 
+static int ov2640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
 	.s_stream	= ov2640_s_stream,
 	.g_mbus_fmt	= ov2640_g_fmt,
@@ -1091,6 +1015,7 @@
 	.cropcap	= ov2640_cropcap,
 	.g_crop		= ov2640_g_crop,
 	.enum_mbus_fmt	= ov2640_enum_fmt,
+	.g_mbus_config	= ov2640_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov2640_subdev_ops = {
@@ -1104,18 +1029,11 @@
 static int ov2640_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
-	struct ov2640_priv        *priv;
-	struct soc_camera_device  *icd = client->dev.platform_data;
-	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link    *icl;
-	int                        ret;
+	struct ov2640_priv	*priv;
+	struct soc_camera_link	*icl = soc_camera_i2c_to_link(client);
+	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+	int			ret;
 
-	if (!icd) {
-		dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&adapter->dev,
 			"OV2640: Missing platform_data for driver\n");
@@ -1135,15 +1053,23 @@
 		return -ENOMEM;
 	}
 
-	priv->info = icl->priv;
-
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
 
-	icd->ops = &ov2640_ops;
+		kfree(priv);
+		return err;
+	}
 
-	ret = ov2640_video_probe(icd, client);
+	ret = ov2640_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	} else {
 		dev_info(&adapter->dev, "OV2640 Probed\n");
@@ -1155,9 +1081,9 @@
 static int ov2640_remove(struct i2c_client *client)
 {
 	struct ov2640_priv       *priv = to_ov2640(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c
index 349a4ad..bb37ec8 100644
--- a/drivers/media/video/ov5642.c
+++ b/drivers/media/video/ov5642.c
@@ -14,14 +14,16 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
+#include <linux/v4l2-mediabus.h>
 
 #include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-subdev.h>
 
@@ -35,7 +37,7 @@
 #define REG_WINDOW_START_Y_LOW		0x3803
 #define REG_WINDOW_WIDTH_HIGH		0x3804
 #define REG_WINDOW_WIDTH_LOW		0x3805
-#define REG_WINDOW_HEIGHT_HIGH 		0x3806
+#define REG_WINDOW_HEIGHT_HIGH		0x3806
 #define REG_WINDOW_HEIGHT_LOW		0x3807
 #define REG_OUT_WIDTH_HIGH		0x3808
 #define REG_OUT_WIDTH_LOW		0x3809
@@ -45,20 +47,45 @@
 #define REG_OUT_TOTAL_WIDTH_LOW		0x380d
 #define REG_OUT_TOTAL_HEIGHT_HIGH	0x380e
 #define REG_OUT_TOTAL_HEIGHT_LOW	0x380f
+#define REG_OUTPUT_FORMAT		0x4300
+#define REG_ISP_CTRL_01			0x5001
+#define REG_AVG_WINDOW_END_X_HIGH	0x5682
+#define REG_AVG_WINDOW_END_X_LOW	0x5683
+#define REG_AVG_WINDOW_END_Y_HIGH	0x5686
+#define REG_AVG_WINDOW_END_Y_LOW	0x5687
 
-/*
- * define standard resolution.
- * Works currently only for up to 720 lines
- * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720
- */
-
-#define OV5642_WIDTH		1280
-#define OV5642_HEIGHT		720
-#define OV5642_TOTAL_WIDTH	3200
-#define OV5642_TOTAL_HEIGHT	2000
+/* active pixel array size */
 #define OV5642_SENSOR_SIZE_X	2592
 #define OV5642_SENSOR_SIZE_Y	1944
 
+/*
+ * About OV5642 resolution, cropping and binning:
+ * This sensor supports it all, at least in the feature description.
+ * Unfortunately, no combination of appropriate registers settings could make
+ * the chip work the intended way. As it works with predefined register lists,
+ * some undocumented registers are presumably changed there to achieve their
+ * goals.
+ * This driver currently only works for resolutions up to 720 lines with a
+ * 1:1 scale. Hopefully these restrictions will be removed in the future.
+ */
+#define OV5642_MAX_WIDTH	OV5642_SENSOR_SIZE_X
+#define OV5642_MAX_HEIGHT	720
+
+/* default sizes */
+#define OV5642_DEFAULT_WIDTH	1280
+#define OV5642_DEFAULT_HEIGHT	OV5642_MAX_HEIGHT
+
+/* minimum extra blanking */
+#define BLANKING_EXTRA_WIDTH		500
+#define BLANKING_EXTRA_HEIGHT		20
+
+/*
+ * the sensor's autoexposure is buggy when setting total_height low.
+ * It tries to expose longer than 1 frame period without taking care of it
+ * and this leads to weird output. So we set 1000 lines as minimum.
+ */
+#define BLANKING_MIN_HEIGHT		1000
+
 struct regval_list {
 	u16 reg_num;
 	u8 value;
@@ -582,6 +609,11 @@
 struct ov5642 {
 	struct v4l2_subdev		subdev;
 	const struct ov5642_datafmt	*fmt;
+	struct v4l2_rect                crop_rect;
+
+	/* blanking information */
+	int total_width;
+	int total_height;
 };
 
 static const struct ov5642_datafmt ov5642_colour_fmts[] = {
@@ -642,6 +674,21 @@
 
 	return 0;
 }
+
+/*
+ * convenience function to write 16 bit register values that are split up
+ * into two consecutive high and low parts
+ */
+static int reg_write16(struct i2c_client *client, u16 reg, u16 val16)
+{
+	int ret;
+
+	ret = reg_write(client, reg, val16 >> 8);
+	if (ret)
+		return ret;
+	return reg_write(client, reg + 1, val16 & 0x00ff);
+}
+
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
 {
@@ -685,58 +732,55 @@
 	return 0;
 }
 
-static int ov5642_set_resolution(struct i2c_client *client)
+static int ov5642_set_resolution(struct v4l2_subdev *sd)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+	int width = priv->crop_rect.width;
+	int height = priv->crop_rect.height;
+	int total_width = priv->total_width;
+	int total_height = priv->total_height;
+	int start_x = (OV5642_SENSOR_SIZE_X - width) / 2;
+	int start_y = (OV5642_SENSOR_SIZE_Y - height) / 2;
 	int ret;
-	u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8;
-	u8 start_x_low  = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff;
-	u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8;
-	u8 start_y_low  = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff;
 
-	u8 width_high	= OV5642_WIDTH  >> 8;
-	u8 width_low	= OV5642_WIDTH  & 0xff;
-	u8 height_high	= OV5642_HEIGHT >> 8;
-	u8 height_low	= OV5642_HEIGHT & 0xff;
-
-	u8 total_width_high  = OV5642_TOTAL_WIDTH  >> 8;
-	u8 total_width_low   = OV5642_TOTAL_WIDTH  & 0xff;
-	u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8;
-	u8 total_height_low  = OV5642_TOTAL_HEIGHT & 0xff;
-
-	ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high);
+	/*
+	 * This should set the starting point for cropping.
+	 * Doesn't work so far.
+	 */
+	ret = reg_write16(client, REG_WINDOW_START_X_HIGH, start_x);
 	if (!ret)
-		ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low);
-	if (!ret)
-		ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high);
-	if (!ret)
-		ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low);
+		ret = reg_write16(client, REG_WINDOW_START_Y_HIGH, start_y);
+	if (!ret) {
+		priv->crop_rect.left = start_x;
+		priv->crop_rect.top = start_y;
+	}
 
 	if (!ret)
-		ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high);
+		ret = reg_write16(client, REG_WINDOW_WIDTH_HIGH, width);
 	if (!ret)
-		ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low);
-	if (!ret)
-		ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high);
-	if (!ret)
-		ret = reg_write(client, REG_WINDOW_HEIGHT_LOW,  height_low);
+		ret = reg_write16(client, REG_WINDOW_HEIGHT_HIGH, height);
+	if (ret)
+		return ret;
+	priv->crop_rect.width = width;
+	priv->crop_rect.height = height;
 
+	/* Set the output window size. Only 1:1 scale is supported so far. */
+	ret = reg_write16(client, REG_OUT_WIDTH_HIGH, width);
 	if (!ret)
-		ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high);
-	if (!ret)
-		ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low);
-	if (!ret)
-		ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high);
-	if (!ret)
-		ret = reg_write(client, REG_OUT_HEIGHT_LOW,  height_low);
+		ret = reg_write16(client, REG_OUT_HEIGHT_HIGH, height);
 
+	/* Total width = output size + blanking */
 	if (!ret)
-		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width_high);
+		ret = reg_write16(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width);
 	if (!ret)
-		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, total_width_low);
+		ret = reg_write16(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height);
+
+	/* Sets the window for AWB calculations */
 	if (!ret)
-		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height_high);
+		ret = reg_write16(client, REG_AVG_WINDOW_END_X_HIGH, width);
 	if (!ret)
-		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW,  total_height_low);
+		ret = reg_write16(client, REG_AVG_WINDOW_END_Y_HIGH, height);
 
 	return ret;
 }
@@ -744,18 +788,18 @@
 static int ov5642_try_fmt(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *mf)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
 	const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
 
-	dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n",
-			__func__, mf->code, mf->width, mf->height);
+	mf->width = priv->crop_rect.width;
+	mf->height = priv->crop_rect.height;
 
 	if (!fmt) {
 		mf->code	= ov5642_colour_fmts[0].code;
 		mf->colorspace	= ov5642_colour_fmts[0].colorspace;
 	}
 
-	mf->width	= OV5642_WIDTH;
-	mf->height	= OV5642_HEIGHT;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
@@ -767,20 +811,13 @@
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov5642 *priv = to_ov5642(client);
 
-	dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
-
 	/* MIPI CSI could have changed the format, double-check */
 	if (!ov5642_find_datafmt(mf->code))
 		return -EINVAL;
 
 	ov5642_try_fmt(sd, mf);
-
 	priv->fmt = ov5642_find_datafmt(mf->code);
 
-	ov5642_write_array(client, ov5642_default_regs_init);
-	ov5642_set_resolution(client);
-	ov5642_write_array(client, ov5642_default_regs_finalise);
-
 	return 0;
 }
 
@@ -794,8 +831,8 @@
 
 	mf->code	= fmt->code;
 	mf->colorspace	= fmt->colorspace;
-	mf->width	= OV5642_WIDTH;
-	mf->height	= OV5642_HEIGHT;
+	mf->width	= priv->crop_rect.width;
+	mf->height	= priv->crop_rect.height;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
@@ -828,15 +865,44 @@
 	return 0;
 }
 
+static int ov5642_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+	struct v4l2_rect *rect = &a->c;
+	int ret;
+
+	v4l_bound_align_image(&rect->width, 48, OV5642_MAX_WIDTH, 1,
+			      &rect->height, 32, OV5642_MAX_HEIGHT, 1, 0);
+
+	priv->crop_rect.width	= rect->width;
+	priv->crop_rect.height	= rect->height;
+	priv->total_width	= rect->width + BLANKING_EXTRA_WIDTH;
+	priv->total_height	= max_t(int, rect->height +
+							BLANKING_EXTRA_HEIGHT,
+							BLANKING_MIN_HEIGHT);
+	priv->crop_rect.width		= rect->width;
+	priv->crop_rect.height		= rect->height;
+
+	ret = ov5642_write_array(client, ov5642_default_regs_init);
+	if (!ret)
+		ret = ov5642_set_resolution(sd);
+	if (!ret)
+		ret = ov5642_write_array(client, ov5642_default_regs_finalise);
+
+	return ret;
+}
+
 static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
 	struct v4l2_rect *rect = &a->c;
 
-	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	rect->top	= 0;
-	rect->left	= 0;
-	rect->width	= OV5642_WIDTH;
-	rect->height	= OV5642_HEIGHT;
+	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	*rect = priv->crop_rect;
 
 	return 0;
 }
@@ -845,8 +911,8 @@
 {
 	a->bounds.left			= 0;
 	a->bounds.top			= 0;
-	a->bounds.width			= OV5642_WIDTH;
-	a->bounds.height		= OV5642_HEIGHT;
+	a->bounds.width			= OV5642_MAX_WIDTH;
+	a->bounds.height		= OV5642_MAX_HEIGHT;
 	a->defrect			= a->bounds;
 	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
@@ -855,16 +921,47 @@
 	return 0;
 }
 
+static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	cfg->type = V4L2_MBUS_CSI2;
+	cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
+					V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+
+	return 0;
+}
+
+static int ov5642_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client;
+	int ret;
+
+	if (!on)
+		return 0;
+
+	client = v4l2_get_subdevdata(sd);
+	ret = ov5642_write_array(client, ov5642_default_regs_init);
+	if (!ret)
+		ret = ov5642_set_resolution(sd);
+	if (!ret)
+		ret = ov5642_write_array(client, ov5642_default_regs_finalise);
+
+	return ret;
+}
+
 static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = {
 	.s_mbus_fmt	= ov5642_s_fmt,
 	.g_mbus_fmt	= ov5642_g_fmt,
 	.try_mbus_fmt	= ov5642_try_fmt,
 	.enum_mbus_fmt	= ov5642_enum_fmt,
+	.s_crop		= ov5642_s_crop,
 	.g_crop		= ov5642_g_crop,
 	.cropcap	= ov5642_cropcap,
+	.g_mbus_config	= ov5642_g_mbus_config,
 };
 
 static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = {
+	.s_power	= ov5642_s_power,
 	.g_chip_ident	= ov5642_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= ov5642_get_register,
@@ -877,28 +974,7 @@
 	.video	= &ov5642_subdev_video_ops,
 };
 
-/*
- * We have to provide soc-camera operations, but we don't have anything to say
- * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
- */
-static unsigned long soc_ov5642_query_bus_param(struct soc_camera_device *icd)
-{
-	return 0;
-}
-
-static int soc_ov5642_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	return -EINVAL;
-}
-
-static struct soc_camera_ops soc_ov5642_ops = {
-	.query_bus_param	= soc_ov5642_query_bus_param,
-	.set_bus_param		= soc_ov5642_set_bus_param,
-};
-
-static int ov5642_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int ov5642_video_probe(struct i2c_client *client)
 {
 	int ret;
 	u8 id_high, id_low;
@@ -929,16 +1005,9 @@
 			const struct i2c_device_id *did)
 {
 	struct ov5642 *priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "OV5642: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "OV5642: missing platform data!\n");
 		return -EINVAL;
@@ -950,17 +1019,24 @@
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
 
-	icd->ops	= &soc_ov5642_ops;
-	priv->fmt	= &ov5642_colour_fmts[0];
+	priv->fmt		= &ov5642_colour_fmts[0];
 
-	ret = ov5642_video_probe(icd, client);
+	priv->crop_rect.width	= OV5642_DEFAULT_WIDTH;
+	priv->crop_rect.height	= OV5642_DEFAULT_HEIGHT;
+	priv->crop_rect.left	= (OV5642_MAX_WIDTH - OV5642_DEFAULT_WIDTH) / 2;
+	priv->crop_rect.top	= (OV5642_MAX_HEIGHT - OV5642_DEFAULT_HEIGHT) / 2;
+	priv->crop_rect.width	= OV5642_DEFAULT_WIDTH;
+	priv->crop_rect.height	= OV5642_DEFAULT_HEIGHT;
+	priv->total_width = OV5642_DEFAULT_WIDTH + BLANKING_EXTRA_WIDTH;
+	priv->total_height = BLANKING_MIN_HEIGHT;
+
+	ret = ov5642_video_probe(client);
 	if (ret < 0)
 		goto error;
 
 	return 0;
 
 error:
-	icd->ops = NULL;
 	kfree(priv);
 	return ret;
 }
@@ -968,10 +1044,8 @@
 static int ov5642_remove(struct i2c_client *client)
 {
 	struct ov5642 *priv = to_ov5642(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
 	kfree(priv);
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index 456d9ad..9f2d26b 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -28,10 +28,12 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/module.h>
 
 #include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
-
+#include <media/v4l2-ctrls.h>
 
 /* Register definitions */
 #define REG_GAIN		0x00	/* range 00 - 3F */
@@ -177,20 +179,23 @@
 
 struct ov6650 {
 	struct v4l2_subdev	subdev;
-
-	int			gain;
-	int			blue;
-	int			red;
-	int			saturation;
-	int			hue;
-	int			brightness;
-	int			exposure;
-	int			gamma;
-	int			aec;
-	bool			vflip;
-	bool			hflip;
-	bool			awb;
-	bool			agc;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* exposure/autoexposure cluster */
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
+	struct {
+		/* gain/autogain cluster */
+		struct v4l2_ctrl *autogain;
+		struct v4l2_ctrl *gain;
+	};
+	struct {
+		/* blue/red/autowhitebalance cluster */
+		struct v4l2_ctrl *autowb;
+		struct v4l2_ctrl *blue;
+		struct v4l2_ctrl *red;
+	};
 	bool			half_scale;	/* scale down output by 2 */
 	struct v4l2_rect	rect;		/* sensor cropping window */
 	unsigned long		pclk_limit;	/* from host */
@@ -210,126 +215,6 @@
 	V4L2_MBUS_FMT_Y8_1X8,
 };
 
-static const struct v4l2_queryctrl ov6650_controls[] = {
-	{
-		.id		= V4L2_CID_AUTOGAIN,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "AGC",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	},
-	{
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain",
-		.minimum	= 0,
-		.maximum	= 0x3f,
-		.step		= 1,
-		.default_value	= DEF_GAIN,
-	},
-	{
-		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "AWB",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	},
-	{
-		.id		= V4L2_CID_BLUE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Blue",
-		.minimum	= 0,
-		.maximum	= 0xff,
-		.step		= 1,
-		.default_value	= DEF_BLUE,
-	},
-	{
-		.id		= V4L2_CID_RED_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Red",
-		.minimum	= 0,
-		.maximum	= 0xff,
-		.step		= 1,
-		.default_value	= DEF_RED,
-	},
-	{
-		.id		= V4L2_CID_SATURATION,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Saturation",
-		.minimum	= 0,
-		.maximum	= 0xf,
-		.step		= 1,
-		.default_value	= 0x8,
-	},
-	{
-		.id		= V4L2_CID_HUE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Hue",
-		.minimum	= 0,
-		.maximum	= HUE_MASK,
-		.step		= 1,
-		.default_value	= DEF_HUE,
-	},
-	{
-		.id		= V4L2_CID_BRIGHTNESS,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Brightness",
-		.minimum	= 0,
-		.maximum	= 0xff,
-		.step		= 1,
-		.default_value	= 0x80,
-	},
-	{
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "AEC",
-		.minimum	= 0,
-		.maximum	= 3,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= 0,
-		.maximum	= 0xff,
-		.step		= 1,
-		.default_value	= DEF_AECH,
-	},
-	{
-		.id		= V4L2_CID_GAMMA,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gamma",
-		.minimum	= 0,
-		.maximum	= 0xff,
-		.step		= 1,
-		.default_value	= 0x12,
-	},
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 /* read a register */
 static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 {
@@ -419,213 +304,90 @@
 	return 0;
 }
 
-/* Alter bus settings on camera side */
-static int ov6650_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	int ret;
-
-	flags = soc_camera_apply_sensor_flags(icl, flags);
-
-	if (flags & SOCAM_PCLK_SAMPLE_RISING)
-		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
-	else
-		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
-	if (ret)
-		return ret;
-
-	if (flags & SOCAM_HSYNC_ACTIVE_LOW)
-		ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
-	else
-		ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
-	if (ret)
-		return ret;
-
-	if (flags & SOCAM_VSYNC_ACTIVE_HIGH)
-		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
-	else
-		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
-
-	return ret;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov6650_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	unsigned long flags = SOCAM_MASTER |
-		SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 /* Get status of additional camera capabilities */
-static int ov6650_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
+	struct v4l2_subdev *sd = &priv->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov6650 *priv = to_ov6650(client);
-	uint8_t reg;
-	int ret = 0;
+	uint8_t reg, reg2;
+	int ret;
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUTOGAIN:
-		ctrl->value = priv->agc;
-		break;
-	case V4L2_CID_GAIN:
-		if (priv->agc) {
-			ret = ov6650_reg_read(client, REG_GAIN, &reg);
-			ctrl->value = reg;
-		} else {
-			ctrl->value = priv->gain;
-		}
-		break;
+		ret = ov6650_reg_read(client, REG_GAIN, &reg);
+		if (!ret)
+			priv->gain->val = reg;
+		return ret;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = priv->awb;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		if (priv->awb) {
-			ret = ov6650_reg_read(client, REG_BLUE, &reg);
-			ctrl->value = reg;
-		} else {
-			ctrl->value = priv->blue;
+		ret = ov6650_reg_read(client, REG_BLUE, &reg);
+		if (!ret)
+			ret = ov6650_reg_read(client, REG_RED, &reg2);
+		if (!ret) {
+			priv->blue->val = reg;
+			priv->red->val = reg2;
 		}
-		break;
-	case V4L2_CID_RED_BALANCE:
-		if (priv->awb) {
-			ret = ov6650_reg_read(client, REG_RED, &reg);
-			ctrl->value = reg;
-		} else {
-			ctrl->value = priv->red;
-		}
-		break;
-	case V4L2_CID_SATURATION:
-		ctrl->value = priv->saturation;
-		break;
-	case V4L2_CID_HUE:
-		ctrl->value = priv->hue;
-		break;
-	case V4L2_CID_BRIGHTNESS:
-		ctrl->value = priv->brightness;
-		break;
+		return ret;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = priv->aec;
-		break;
-	case V4L2_CID_EXPOSURE:
-		if (priv->aec) {
-			ret = ov6650_reg_read(client, REG_AECH, &reg);
-			ctrl->value = reg;
-		} else {
-			ctrl->value = priv->exposure;
-		}
-		break;
-	case V4L2_CID_GAMMA:
-		ctrl->value = priv->gamma;
-		break;
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->hflip;
-		break;
+		ret = ov6650_reg_read(client, REG_AECH, &reg);
+		if (!ret)
+			priv->exposure->val = reg;
+		return ret;
 	}
-	return ret;
+	return -EINVAL;
 }
 
 /* Set status of additional camera capabilities */
-static int ov6650_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
+	struct v4l2_subdev *sd = &priv->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov6650 *priv = to_ov6650(client);
-	int ret = 0;
+	int ret;
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUTOGAIN:
 		ret = ov6650_reg_rmw(client, REG_COMB,
-				ctrl->value ? COMB_AGC : 0, COMB_AGC);
-		if (!ret)
-			priv->agc = ctrl->value;
-		break;
-	case V4L2_CID_GAIN:
-		ret = ov6650_reg_write(client, REG_GAIN, ctrl->value);
-		if (!ret)
-			priv->gain = ctrl->value;
-		break;
+				ctrl->val ? COMB_AGC : 0, COMB_AGC);
+		if (!ret && !ctrl->val)
+			ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
+		return ret;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
 		ret = ov6650_reg_rmw(client, REG_COMB,
-				ctrl->value ? COMB_AWB : 0, COMB_AWB);
-		if (!ret)
-			priv->awb = ctrl->value;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = ov6650_reg_write(client, REG_BLUE, ctrl->value);
-		if (!ret)
-			priv->blue = ctrl->value;
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ret = ov6650_reg_write(client, REG_RED, ctrl->value);
-		if (!ret)
-			priv->red = ctrl->value;
-		break;
-	case V4L2_CID_SATURATION:
-		ret = ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->value),
-				SAT_MASK);
-		if (!ret)
-			priv->saturation = ctrl->value;
-		break;
-	case V4L2_CID_HUE:
-		ret = ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->value),
-				HUE_MASK);
-		if (!ret)
-			priv->hue = ctrl->value;
-		break;
-	case V4L2_CID_BRIGHTNESS:
-		ret = ov6650_reg_write(client, REG_BRT, ctrl->value);
-		if (!ret)
-			priv->brightness = ctrl->value;
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		switch (ctrl->value) {
-		case V4L2_EXPOSURE_AUTO:
-			ret = ov6650_reg_rmw(client, REG_COMB, COMB_AEC, 0);
-			break;
-		default:
-			ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_AEC);
-			break;
+				ctrl->val ? COMB_AWB : 0, COMB_AWB);
+		if (!ret && !ctrl->val) {
+			ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
+			if (!ret)
+				ret = ov6650_reg_write(client, REG_RED,
+							priv->red->val);
 		}
-		if (!ret)
-			priv->aec = ctrl->value;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ret = ov6650_reg_write(client, REG_AECH, ctrl->value);
-		if (!ret)
-			priv->exposure = ctrl->value;
-		break;
+		return ret;
+	case V4L2_CID_SATURATION:
+		return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
+				SAT_MASK);
+	case V4L2_CID_HUE:
+		return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
+				HUE_MASK);
+	case V4L2_CID_BRIGHTNESS:
+		return ov6650_reg_write(client, REG_BRT, ctrl->val);
+	case V4L2_CID_EXPOSURE_AUTO:
+		ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
+				V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
+		if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
+			ret = ov6650_reg_write(client, REG_AECH,
+						priv->exposure->val);
+		return ret;
 	case V4L2_CID_GAMMA:
-		ret = ov6650_reg_write(client, REG_GAM1, ctrl->value);
-		if (!ret)
-			priv->gamma = ctrl->value;
-		break;
+		return ov6650_reg_write(client, REG_GAM1, ctrl->val);
 	case V4L2_CID_VFLIP:
-		ret = ov6650_reg_rmw(client, REG_COMB,
-				ctrl->value ? COMB_FLIP_V : 0, COMB_FLIP_V);
-		if (!ret)
-			priv->vflip = ctrl->value;
-		break;
+		return ov6650_reg_rmw(client, REG_COMB,
+				ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
 	case V4L2_CID_HFLIP:
-		ret = ov6650_reg_rmw(client, REG_COMB,
-				ctrl->value ? COMB_FLIP_H : 0, COMB_FLIP_H);
-		if (!ret)
-			priv->hflip = ctrl->value;
-		break;
+		return ov6650_reg_rmw(client, REG_COMB,
+				ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 /* Get chip identification */
@@ -778,7 +540,7 @@
 static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
 	struct soc_camera_sense *sense = icd->sense;
 	struct ov6650 *priv = to_ov6650(client);
 	bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
@@ -1057,8 +819,7 @@
 	return ret;
 }
 
-static int ov6650_video_probe(struct soc_camera_device *icd,
-				struct i2c_client *client)
+static int ov6650_video_probe(struct i2c_client *client)
 {
 	u8		pidh, pidl, midh, midl;
 	int		ret = 0;
@@ -1094,16 +855,12 @@
 	return ret;
 }
 
-static struct soc_camera_ops ov6650_ops = {
-	.set_bus_param		= ov6650_set_bus_param,
-	.query_bus_param	= ov6650_query_bus_param,
-	.controls		= ov6650_controls,
-	.num_controls		= ARRAY_SIZE(ov6650_controls),
+static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
+	.g_volatile_ctrl = ov6550_g_volatile_ctrl,
+	.s_ctrl = ov6550_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov6650_core_ops = {
-	.g_ctrl			= ov6650_g_ctrl,
-	.s_ctrl			= ov6650_s_ctrl,
 	.g_chip_ident		= ov6650_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register		= ov6650_get_register,
@@ -1111,6 +868,55 @@
 #endif
 };
 
+/* Request bus settings on camera side */
+static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER |
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+/* Alter bus settings on camera side */
+static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+	int ret;
+
+	if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
+	else
+		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
+	if (ret)
+		return ret;
+
+	if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+		ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
+	else
+		ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
+	if (ret)
+		return ret;
+
+	if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
+	else
+		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
+
+	return ret;
+}
+
 static struct v4l2_subdev_video_ops ov6650_video_ops = {
 	.s_stream	= ov6650_s_stream,
 	.g_mbus_fmt	= ov6650_g_fmt,
@@ -1122,6 +928,8 @@
 	.s_crop		= ov6650_s_crop,
 	.g_parm		= ov6650_g_parm,
 	.s_parm		= ov6650_s_parm,
+	.g_mbus_config	= ov6650_g_mbus_config,
+	.s_mbus_config	= ov6650_s_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov6650_subdev_ops = {
@@ -1136,16 +944,9 @@
 			const struct i2c_device_id *did)
 {
 	struct ov6650 *priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "Missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "Missing platform_data for driver\n");
 		return -EINVAL;
@@ -1159,8 +960,46 @@
 	}
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
+	v4l2_ctrl_handler_init(&priv->hdl, 13);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
+	priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
+	priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
+	priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
+			&ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
+			V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
+	priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
+	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+			V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
 
-	icd->ops = &ov6650_ops;
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
+
+		kfree(priv);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
+	v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
+	v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
+				V4L2_EXPOSURE_MANUAL, true);
 
 	priv->rect.left	  = DEF_HSTRT << 1;
 	priv->rect.top	  = DEF_VSTRT << 1;
@@ -1170,10 +1009,12 @@
 	priv->code	  = V4L2_MBUS_FMT_YUYV8_2X8;
 	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
-	ret = ov6650_video_probe(icd, client);
+	ret = ov6650_video_probe(client);
+	if (!ret)
+		ret = v4l2_ctrl_handler_setup(&priv->hdl);
 
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	}
 
@@ -1184,6 +1025,8 @@
 {
 	struct ov6650 *priv = to_ov6650(client);
 
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 397870f..9f6ce3d 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -20,12 +20,14 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+
+#include <media/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-subdev.h>
-#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
-#include <media/ov772x.h>
 
 /*
  * register offset
@@ -400,6 +402,7 @@
 
 struct ov772x_priv {
 	struct v4l2_subdev                subdev;
+	struct v4l2_ctrl_handler	  hdl;
 	struct ov772x_camera_info        *info;
 	const struct ov772x_color_format *cfmt;
 	const struct ov772x_win_size     *win;
@@ -517,36 +520,6 @@
 	.regs     = ov772x_qvga_regs,
 };
 
-static const struct v4l2_queryctrl ov772x_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_BAND_STOP_FILTER,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Band-stop filter",
-		.minimum	= 0,
-		.maximum	= 256,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 /*
  * general function
  */
@@ -620,75 +593,30 @@
 	return 0;
 }
 
-static int ov772x_set_bus_param(struct soc_camera_device *icd,
-				unsigned long		  flags)
+static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	return 0;
-}
-
-static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (priv->info->flags & OV772X_FLAG_8BIT)
-		flags |= SOCAM_DATAWIDTH_8;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	case V4L2_CID_BAND_STOP_FILTER:
-		ctrl->value = priv->band_filter;
-		break;
-	}
-	return 0;
-}
-
-static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
+	struct ov772x_priv *priv = container_of(ctrl->handler,
+						struct ov772x_priv, hdl);
+	struct v4l2_subdev *sd = &priv->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	int ret = 0;
 	u8 val;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		val = ctrl->value ? VFLIP_IMG : 0x00;
-		priv->flag_vflip = ctrl->value;
+		val = ctrl->val ? VFLIP_IMG : 0x00;
+		priv->flag_vflip = ctrl->val;
 		if (priv->info->flags & OV772X_FLAG_VFLIP)
 			val ^= VFLIP_IMG;
-		ret = ov772x_mask_set(client, COM3, VFLIP_IMG, val);
-		break;
+		return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
 	case V4L2_CID_HFLIP:
-		val = ctrl->value ? HFLIP_IMG : 0x00;
-		priv->flag_hflip = ctrl->value;
+		val = ctrl->val ? HFLIP_IMG : 0x00;
+		priv->flag_hflip = ctrl->val;
 		if (priv->info->flags & OV772X_FLAG_HFLIP)
 			val ^= HFLIP_IMG;
-		ret = ov772x_mask_set(client, COM3, HFLIP_IMG, val);
-		break;
+		return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
 	case V4L2_CID_BAND_STOP_FILTER:
-		if ((unsigned)ctrl->value > 256)
-			ctrl->value = 256;
-		if (ctrl->value == priv->band_filter)
-			break;
-		if (!ctrl->value) {
+		if (!ctrl->val) {
 			/* Switch the filter off, it is on now */
 			ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
 			if (!ret)
@@ -696,7 +624,7 @@
 						      BNDF_ON_OFF, 0);
 		} else {
 			/* Switch the filter on, set AEC low limit */
-			val = 256 - ctrl->value;
+			val = 256 - ctrl->val;
 			ret = ov772x_mask_set(client, COM8,
 					      BNDF_ON_OFF, BNDF_ON_OFF);
 			if (!ret)
@@ -704,11 +632,11 @@
 						      0xff, val);
 		}
 		if (!ret)
-			priv->band_filter = ctrl->value;
-		break;
+			priv->band_filter = ctrl->val;
+		return ret;
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 static int ov772x_g_chip_ident(struct v4l2_subdev *sd,
@@ -822,13 +750,13 @@
 			goto ov772x_set_fmt_error;
 
 		ret = ov772x_mask_set(client,
-				      EDGE_TRSHLD, EDGE_THRESHOLD_MASK,
+				      EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK,
 				      priv->info->edgectrl.threshold);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
 
 		ret = ov772x_mask_set(client,
-				      EDGE_STRNGT, EDGE_STRENGTH_MASK,
+				      EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK,
 				      priv->info->edgectrl.strength);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
@@ -840,13 +768,13 @@
 		 * set upper and lower limit
 		 */
 		ret = ov772x_mask_set(client,
-				      EDGE_UPPER, EDGE_UPPER_MASK,
+				      EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
 				      priv->info->edgectrl.upper);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
 
 		ret = ov772x_mask_set(client,
-				      EDGE_LOWER, EDGE_LOWER_MASK,
+				      EDGE_LOWER, OV772X_EDGE_LOWER_MASK,
 				      priv->info->edgectrl.lower);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
@@ -1025,17 +953,12 @@
 	return 0;
 }
 
-static int ov772x_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int ov772x_video_probe(struct i2c_client *client)
 {
 	struct ov772x_priv *priv = to_ov772x(client);
 	u8                  pid, ver;
 	const char         *devname;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -1064,20 +987,14 @@
 		 ver,
 		 i2c_smbus_read_byte_data(client, MIDH),
 		 i2c_smbus_read_byte_data(client, MIDL));
-
-	return 0;
+	return v4l2_ctrl_handler_setup(&priv->hdl);
 }
 
-static struct soc_camera_ops ov772x_ops = {
-	.set_bus_param		= ov772x_set_bus_param,
-	.query_bus_param	= ov772x_query_bus_param,
-	.controls		= ov772x_controls,
-	.num_controls		= ARRAY_SIZE(ov772x_controls),
+static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
+	.s_ctrl = ov772x_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
-	.g_ctrl		= ov772x_g_ctrl,
-	.s_ctrl		= ov772x_s_ctrl,
 	.g_chip_ident	= ov772x_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= ov772x_g_register,
@@ -1095,6 +1012,21 @@
 	return 0;
 }
 
+static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
 	.s_stream	= ov772x_s_stream,
 	.g_mbus_fmt	= ov772x_g_fmt,
@@ -1103,6 +1035,7 @@
 	.cropcap	= ov772x_cropcap,
 	.g_crop		= ov772x_g_crop,
 	.enum_mbus_fmt	= ov772x_enum_fmt,
+	.g_mbus_config	= ov772x_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1117,21 +1050,16 @@
 static int ov772x_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
-	struct ov772x_priv        *priv;
-	struct soc_camera_device  *icd = client->dev.platform_data;
-	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link    *icl;
-	int                        ret;
+	struct ov772x_priv	*priv;
+	struct soc_camera_link	*icl = soc_camera_i2c_to_link(client);
+	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+	int			ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "OV772X: missing soc-camera data!\n");
+	if (!icl || !icl->priv) {
+		dev_err(&client->dev, "OV772X: missing platform data!\n");
 		return -EINVAL;
 	}
 
-	icl = to_soc_camera_link(icd);
-	if (!icl || !icl->priv)
-		return -EINVAL;
-
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
 			"I2C-Adapter doesn't support "
@@ -1146,12 +1074,24 @@
 	priv->info = icl->priv;
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
+	v4l2_ctrl_handler_init(&priv->hdl, 3);
+	v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+			V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
 
-	icd->ops		= &ov772x_ops;
+		kfree(priv);
+		return err;
+	}
 
-	ret = ov772x_video_probe(icd, client);
+	ret = ov772x_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	}
 
@@ -1161,9 +1101,9 @@
 static int ov772x_remove(struct i2c_client *client)
 {
 	struct ov772x_priv *priv = to_ov772x(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 3681a6f..a4f9979 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -24,10 +24,13 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-common.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 
 #include "ov9640.h"
 
@@ -162,27 +165,6 @@
 	V4L2_MBUS_FMT_RGB565_2X8_LE,
 };
 
-static const struct v4l2_queryctrl ov9640_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 /* read a register */
 static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 {
@@ -284,75 +266,25 @@
 	return 0;
 }
 
-/* Alter bus settings on camera side */
-static int ov9640_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	/*
-	 * REVISIT: the camera probably can do 10 bit transfers, but I don't
-	 *          have those pins connected on my hardware.
-	 */
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-/* Get status of additional camera capabilities */
-static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	}
-	return 0;
-}
-
 /* Set status of additional camera capabilities */
-static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
-	int ret = 0;
+	struct ov9640_priv *priv = container_of(ctrl->handler, struct ov9640_priv, hdl);
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		priv->flag_vflip = ctrl->value;
-		if (ctrl->value)
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
 							OV9640_MVFP_V, 0);
-		else
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
-							0, OV9640_MVFP_V);
-		break;
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
 	case V4L2_CID_HFLIP:
-		priv->flag_hflip = ctrl->value;
-		if (ctrl->value)
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
 							OV9640_MVFP_H, 0);
-		else
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
-							0, OV9640_MVFP_H);
-		break;
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
 	}
-
-	return ret;
+	return -EINVAL;
 }
 
 /* Get chip identification */
@@ -646,10 +578,7 @@
 	return 0;
 }
 
-
-
-static int ov9640_video_probe(struct soc_camera_device *icd,
-				struct i2c_client *client)
+static int ov9640_video_probe(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov9640_priv *priv = to_ov9640_sensor(sd);
@@ -657,29 +586,19 @@
 	const char	*devname;
 	int		ret = 0;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
 
 	ret = ov9640_reg_read(client, OV9640_PID, &pid);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_VER, &ver);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
 	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_VER, &ver);
-	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
-	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
-	if (ret)
-		goto err;
+		return ret;
 
 	switch (VERSION(pid, ver)) {
 	case OV9640_V2:
@@ -693,27 +612,20 @@
 		break;
 	default:
 		dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
 		 devname, pid, ver, midh, midl);
 
-err:
-	return ret;
+	return v4l2_ctrl_handler_setup(&priv->hdl);
 }
 
-static struct soc_camera_ops ov9640_ops = {
-	.set_bus_param		= ov9640_set_bus_param,
-	.query_bus_param	= ov9640_query_bus_param,
-	.controls		= ov9640_controls,
-	.num_controls		= ARRAY_SIZE(ov9640_controls),
+static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
+	.s_ctrl = ov9640_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov9640_core_ops = {
-	.g_ctrl			= ov9640_g_ctrl,
-	.s_ctrl			= ov9640_s_ctrl,
 	.g_chip_ident		= ov9640_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register		= ov9640_get_register,
@@ -722,6 +634,22 @@
 
 };
 
+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops ov9640_video_ops = {
 	.s_stream	= ov9640_s_stream,
 	.s_mbus_fmt	= ov9640_s_fmt,
@@ -729,7 +657,7 @@
 	.enum_mbus_fmt	= ov9640_enum_fmt,
 	.cropcap	= ov9640_cropcap,
 	.g_crop		= ov9640_g_crop,
-
+	.g_mbus_config	= ov9640_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov9640_subdev_ops = {
@@ -744,16 +672,9 @@
 			const struct i2c_device_id *did)
 {
 	struct ov9640_priv *priv;
-	struct soc_camera_device *icd	= client->dev.platform_data;
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "Missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "Missing platform_data for driver\n");
 		return -EINVAL;
@@ -768,12 +689,23 @@
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
 
-	icd->ops	= &ov9640_ops;
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
 
-	ret = ov9640_video_probe(icd, client);
+		kfree(priv);
+		return err;
+	}
+
+	ret = ov9640_video_probe(client);
 
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	}
 
@@ -785,6 +717,8 @@
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov9640.h b/drivers/media/video/ov9640.h
index f8a51b7..6b33a97 100644
--- a/drivers/media/video/ov9640.h
+++ b/drivers/media/video/ov9640.h
@@ -198,12 +198,10 @@
 
 struct ov9640_priv {
 	struct v4l2_subdev		subdev;
+	struct v4l2_ctrl_handler	hdl;
 
 	int				model;
 	int				revision;
-
-	bool				flag_vflip;
-	bool				flag_hflip;
 };
 
 #endif	/* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */
diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index edd1ffc..d9a9f71 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -14,8 +14,11 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
-#include <media/v4l2-chip-ident.h>
+#include <linux/v4l2-mediabus.h>
+
 #include <media/soc_camera.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 
 #define to_ov9740(sd)		container_of(sd, struct ov9740_priv, subdev)
 
@@ -192,6 +195,7 @@
 
 struct ov9740_priv {
 	struct v4l2_subdev		subdev;
+	struct v4l2_ctrl_handler	hdl;
 
 	int				ident;
 	u16				model;
@@ -392,27 +396,6 @@
 	V4L2_MBUS_FMT_YUYV8_2X8,
 };
 
-static const struct v4l2_queryctrl ov9740_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 /* read a register */
 static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val)
 {
@@ -560,25 +543,6 @@
 	return ret;
 }
 
-/* Alter bus settings on camera side */
-static int ov9740_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 /* select nearest higher resolution for capture */
 static void ov9740_res_roundup(u32 *width, u32 *height)
 {
@@ -788,36 +752,18 @@
 	return 0;
 }
 
-/* Get status of additional camera capabilities */
-static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9740_priv *priv = to_ov9740(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 /* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct ov9740_priv *priv = to_ov9740(sd);
+	struct ov9740_priv *priv =
+		container_of(ctrl->handler, struct ov9740_priv, hdl);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		priv->flag_vflip = ctrl->value;
+		priv->flag_vflip = ctrl->val;
 		break;
 	case V4L2_CID_HFLIP:
-		priv->flag_hflip = ctrl->value;
+		priv->flag_hflip = ctrl->val;
 		break;
 	default:
 		return -EINVAL;
@@ -890,18 +836,13 @@
 }
 #endif
 
-static int ov9740_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int ov9740_video_probe(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov9740_priv *priv = to_ov9740(sd);
 	u8 modelhi, modello;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -942,25 +883,33 @@
 	return ret;
 }
 
-static struct soc_camera_ops ov9740_ops = {
-	.set_bus_param		= ov9740_set_bus_param,
-	.query_bus_param	= ov9740_query_bus_param,
-	.controls		= ov9740_controls,
-	.num_controls		= ARRAY_SIZE(ov9740_controls),
-};
+/* Request bus settings on camera side */
+static int ov9740_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
 
 static struct v4l2_subdev_video_ops ov9740_video_ops = {
-	.s_stream		= ov9740_s_stream,
-	.s_mbus_fmt		= ov9740_s_fmt,
-	.try_mbus_fmt		= ov9740_try_fmt,
-	.enum_mbus_fmt		= ov9740_enum_fmt,
-	.cropcap		= ov9740_cropcap,
-	.g_crop			= ov9740_g_crop,
+	.s_stream	= ov9740_s_stream,
+	.s_mbus_fmt	= ov9740_s_fmt,
+	.try_mbus_fmt	= ov9740_try_fmt,
+	.enum_mbus_fmt	= ov9740_enum_fmt,
+	.cropcap	= ov9740_cropcap,
+	.g_crop		= ov9740_g_crop,
+	.g_mbus_config	= ov9740_g_mbus_config,
 };
 
 static struct v4l2_subdev_core_ops ov9740_core_ops = {
-	.g_ctrl			= ov9740_g_ctrl,
-	.s_ctrl			= ov9740_s_ctrl,
 	.g_chip_ident		= ov9740_g_chip_ident,
 	.s_power		= ov9740_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -974,6 +923,10 @@
 	.video			= &ov9740_video_ops,
 };
 
+static const struct v4l2_ctrl_ops ov9740_ctrl_ops = {
+	.s_ctrl = ov9740_s_ctrl,
+};
+
 /*
  * i2c_driver function
  */
@@ -981,16 +934,9 @@
 			const struct i2c_device_id *did)
 {
 	struct ov9740_priv *priv;
-	struct soc_camera_device *icd	= client->dev.platform_data;
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "Missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "Missing platform_data for driver\n");
 		return -EINVAL;
@@ -1003,12 +949,24 @@
 	}
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops);
+	v4l2_ctrl_handler_init(&priv->hdl, 13);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
 
-	icd->ops = &ov9740_ops;
+		kfree(priv);
+		return err;
+	}
 
-	ret = ov9740_video_probe(icd, client);
+	ret = ov9740_video_probe(client);
+	if (!ret)
+		ret = v4l2_ctrl_handler_setup(&priv->hdl);
 	if (ret < 0) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	}
 
@@ -1019,8 +977,9 @@
 {
 	struct ov9740_priv *priv = i2c_get_clientdata(client);
 
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
-
 	return 0;
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index e799331..c6da8f7 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -28,6 +28,7 @@
 
 #include "pvrusb2-devattr.h"
 #include <linux/usb.h>
+#include <linux/module.h>
 /* This is needed in order to pull in tuner type ids... */
 #include <linux/i2c.h>
 #include <media/tuner.h>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 5a6f24d..122b457 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index e72d510..885ce11 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <media/ir-kbd-i2c.h>
 #include "pvrusb2-i2c-core.h"
 #include "pvrusb2-hdw-internal.h"
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index ce7ac45..6d66617 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -29,6 +29,7 @@
 #include "pvrusb2-v4l2.h"
 #include "pvrusb2-ioread.h"
 #include <linux/videodev2.h>
+#include <linux/module.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 360be22..01ff643 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -744,9 +744,9 @@
 /***************************************************************************/
 /* Videobuf2 operations */
 
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct pwc_device *pdev = vb2_get_drv_priv(vq);
 
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index d07df22a..79fb22c 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -214,6 +214,7 @@
 	unsigned long		ciclk;
 	unsigned long		mclk;
 	u32			mclk_divisor;
+	u16			width_flags;	/* max 10 bits */
 
 	struct list_head	capture;
 
@@ -1020,37 +1021,20 @@
 	 * quick capture interface supports both.
 	 */
 	*flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ?
-		  SOCAM_MASTER : SOCAM_SLAVE) |
-		SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_DATA_ACTIVE_HIGH |
-		SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_PCLK_SAMPLE_FALLING;
+		  V4L2_MBUS_MASTER : V4L2_MBUS_SLAVE) |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH |
+		V4L2_MBUS_PCLK_SAMPLE_RISING |
+		V4L2_MBUS_PCLK_SAMPLE_FALLING;
 
 	/* If requested data width is supported by the platform, use it */
-	switch (buswidth) {
-	case 10:
-		if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10))
-			return -EINVAL;
-		*flags |= SOCAM_DATAWIDTH_10;
-		break;
-	case 9:
-		if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9))
-			return -EINVAL;
-		*flags |= SOCAM_DATAWIDTH_9;
-		break;
-	case 8:
-		if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8))
-			return -EINVAL;
-		*flags |= SOCAM_DATAWIDTH_8;
-		break;
-	default:
-		return -EINVAL;
-	}
+	if ((1 << (buswidth - 1)) & pcdev->width_flags)
+		return 0;
 
-	return 0;
+	return -EINVAL;
 }
 
 static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
@@ -1070,12 +1054,12 @@
 	 * Datawidth is now guaranteed to be equal to one of the three values.
 	 * We fix bit-per-pixel equal to data-width...
 	 */
-	switch (flags & SOCAM_DATAWIDTH_MASK) {
-	case SOCAM_DATAWIDTH_10:
+	switch (icd->current_fmt->host_fmt->bits_per_sample) {
+	case 10:
 		dw = 4;
 		bpp = 0x40;
 		break;
-	case SOCAM_DATAWIDTH_9:
+	case 9:
 		dw = 3;
 		bpp = 0x20;
 		break;
@@ -1084,7 +1068,7 @@
 		 * Actually it can only be 8 now,
 		 * default is just to silence compiler warnings
 		 */
-	case SOCAM_DATAWIDTH_8:
+	case 8:
 		dw = 2;
 		bpp = 0;
 	}
@@ -1093,11 +1077,11 @@
 		cicr4 |= CICR4_PCLK_EN;
 	if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
 		cicr4 |= CICR4_MCLK_EN;
-	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
+	if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
 		cicr4 |= CICR4_PCP;
-	if (flags & SOCAM_HSYNC_ACTIVE_LOW)
+	if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
 		cicr4 |= CICR4_HSP;
-	if (flags & SOCAM_VSYNC_ACTIVE_LOW)
+	if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
 		cicr4 |= CICR4_VSP;
 
 	cicr0 = __raw_readl(pcdev->base + CICR0);
@@ -1151,9 +1135,11 @@
 
 static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	unsigned long bus_flags, camera_flags, common_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long bus_flags, common_flags;
 	int ret;
 	struct pxa_cam *cam = icd->host_priv;
 
@@ -1162,45 +1148,59 @@
 	if (ret < 0)
 		return ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	if (!common_flags)
-		return -EINVAL;
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  bus_flags);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
+				 cfg.flags, bus_flags);
+			return -EINVAL;
+		}
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	} else {
+		common_flags = bus_flags;
+	}
 
 	pcdev->channels = 1;
 
 	/* Make choises, based on platform preferences */
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
 		if (pcdev->platform_flags & PXA_CAMERA_HSP)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 		if (pcdev->platform_flags & PXA_CAMERA_VSP)
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+	    (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
 		if (pcdev->platform_flags & PXA_CAMERA_PCP)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
 		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+	}
+
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD) {
+		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+			common_flags, ret);
+		return ret;
 	}
 
 	cam->flags = common_flags;
 
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
-		return ret;
-
 	pxa_camera_setup_cicr(icd, common_flags, pixfmt);
 
 	return 0;
@@ -1209,17 +1209,31 @@
 static int pxa_camera_try_bus_param(struct soc_camera_device *icd,
 				    unsigned char buswidth)
 {
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	unsigned long bus_flags, camera_flags;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long bus_flags, common_flags;
 	int ret = test_platform_param(pcdev, buswidth, &bus_flags);
 
 	if (ret < 0)
 		return ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  bus_flags);
+		if (!common_flags) {
+			dev_warn(icd->parent,
+				 "Flags incompatible: camera 0x%x, host 0x%lx\n",
+				 cfg.flags, bus_flags);
+			return -EINVAL;
+		}
+	} else if (ret == -ENOIOCTLCMD) {
+		ret = 0;
+	}
 
-	return soc_camera_bus_param_compatible(camera_flags, bus_flags) ? 0 : -EINVAL;
+	return ret;
 }
 
 static const struct soc_mbus_pixelfmt pxa_camera_formats[] = {
@@ -1687,6 +1701,12 @@
 			 "data widths, using default 10 bit\n");
 		pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10;
 	}
+	if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8)
+		pcdev->width_flags = 1 << 7;
+	if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9)
+		pcdev->width_flags |= 1 << 8;
+	if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10)
+		pcdev->width_flags |= 1 << 9;
 	pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
 	if (!pcdev->mclk) {
 		dev_warn(&pdev->dev,
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 847ccc0..9937386 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -11,13 +11,15 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 
 #define RJ54N1_DEV_CODE			0x0400
 #define RJ54N1_DEV_CODE2		0x0401
@@ -148,6 +150,7 @@
 
 struct rj54n1 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
 	struct rj54n1_clock_div clk_div;
 	const struct rj54n1_datafmt *fmt;
 	struct v4l2_rect rect;	/* Sensor window */
@@ -499,31 +502,6 @@
 	return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
 }
 
-static int rj54n1_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	/* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
-
-	if (flags & SOCAM_PCLK_SAMPLE_RISING)
-		return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
-	else
-		return reg_write(client, RJ54N1_OUT_SIGPO, 0);
-}
-
-static unsigned long rj54n1_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	const unsigned long flags =
-		SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int rj54n1_set_rect(struct i2c_client *client,
 			   u16 reg_x, u16 reg_y, u16 reg_xy,
 			   u32 width, u32 height)
@@ -1202,134 +1180,51 @@
 }
 #endif
 
-static const struct v4l2_queryctrl rj54n1_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 66,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Auto white balance",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	},
-};
-
-static struct soc_camera_ops rj54n1_ops = {
-	.set_bus_param		= rj54n1_set_bus_param,
-	.query_bus_param	= rj54n1_query_bus_param,
-	.controls		= rj54n1_controls,
-	.num_controls		= ARRAY_SIZE(rj54n1_controls),
-};
-
-static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl);
+	struct v4l2_subdev *sd = &rj54n1->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !(data & 1);
-		break;
-	case V4L2_CID_HFLIP:
-		data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !(data & 2);
-		break;
-	case V4L2_CID_GAIN:
-		data = reg_read(client, RJ54N1_Y_GAIN);
-		if (data < 0)
-			return -EIO;
-
-		ctrl->value = data / 2;
-		break;
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = rj54n1->auto_wb;
-		break;
-	}
-
-	return 0;
-}
-
-static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	int data;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct rj54n1 *rj54n1 = to_rj54n1(client);
-	const struct v4l2_queryctrl *qctrl;
-
-	qctrl = soc_camera_find_qctrl(&rj54n1_ops, ctrl->id);
-	if (!qctrl)
-		return -EINVAL;
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
 		else
 			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_HFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
 		else
 			data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_GAIN:
-		if (ctrl->value > qctrl->maximum ||
-		    ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else if (reg_write(client, RJ54N1_Y_GAIN, ctrl->value * 2) < 0)
+		if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
 		/* Auto WB area - whole image */
-		if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->value << 7,
+		if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7,
 			    0x80) < 0)
 			return -EIO;
-		rj54n1->auto_wb = ctrl->value;
-		break;
+		rj54n1->auto_wb = ctrl->val;
+		return 0;
 	}
 
-	return 0;
+	return -EINVAL;
 }
 
+static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = {
+	.s_ctrl = rj54n1_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
-	.g_ctrl		= rj54n1_g_ctrl,
-	.s_ctrl		= rj54n1_s_ctrl,
 	.g_chip_ident	= rj54n1_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= rj54n1_g_register,
@@ -1337,6 +1232,36 @@
 #endif
 };
 
+static int rj54n1_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags =
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int rj54n1_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	/* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
+	if (soc_camera_apply_board_flags(icl, cfg) &
+	    V4L2_MBUS_PCLK_SAMPLE_RISING)
+		return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
+	else
+		return reg_write(client, RJ54N1_OUT_SIGPO, 0);
+}
+
 static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
 	.s_stream	= rj54n1_s_stream,
 	.s_mbus_fmt	= rj54n1_s_fmt,
@@ -1346,6 +1271,8 @@
 	.g_crop		= rj54n1_g_crop,
 	.s_crop		= rj54n1_s_crop,
 	.cropcap	= rj54n1_cropcap,
+	.g_mbus_config	= rj54n1_g_mbus_config,
+	.s_mbus_config	= rj54n1_s_mbus_config,
 };
 
 static struct v4l2_subdev_ops rj54n1_subdev_ops = {
@@ -1357,17 +1284,12 @@
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int rj54n1_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client,
+static int rj54n1_video_probe(struct i2c_client *client,
 			      struct rj54n1_pdata *priv)
 {
 	int data1, data2;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/* Read out the chip version register */
 	data1 = reg_read(client, RJ54N1_DEV_CODE);
 	data2 = reg_read(client, RJ54N1_DEV_CODE2);
@@ -1395,18 +1317,11 @@
 			const struct i2c_device_id *did)
 {
 	struct rj54n1 *rj54n1;
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
 	struct rj54n1_pdata *rj54n1_priv;
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "RJ54N1CB0C: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl || !icl->priv) {
 		dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
 		return -EINVAL;
@@ -1425,8 +1340,22 @@
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
+	v4l2_ctrl_handler_init(&rj54n1->hdl, 4);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 66);
+	v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
+	if (rj54n1->hdl.error) {
+		int err = rj54n1->hdl.error;
 
-	icd->ops		= &rj54n1_ops;
+		kfree(rj54n1);
+		return err;
+	}
 
 	rj54n1->clk_div		= clk_div;
 	rj54n1->rect.left	= RJ54N1_COLUMN_SKIP;
@@ -1440,25 +1369,24 @@
 	rj54n1->tgclk_mhz	= (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
 		(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
 
-	ret = rj54n1_video_probe(icd, client, rj54n1_priv);
+	ret = rj54n1_video_probe(client, rj54n1_priv);
 	if (ret < 0) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&rj54n1->hdl);
 		kfree(rj54n1);
 		return ret;
 	}
-
-	return ret;
+	return v4l2_ctrl_handler_setup(&rj54n1->hdl);
 }
 
 static int rj54n1_remove(struct i2c_client *client)
 {
 	struct rj54n1 *rj54n1 = to_rj54n1(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
+	v4l2_device_unregister_subdev(&rj54n1->subdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
+	v4l2_ctrl_handler_free(&rj54n1->hdl);
 	kfree(rj54n1);
 
 	return 0;
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
new file mode 100644
index 0000000..0df7f2a
--- /dev/null
+++ b/drivers/media/video/s5k6aa.c
@@ -0,0 +1,1681 @@
+/*
+ * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor
+ * with embedded SoC ISP.
+ *
+ * Copyright (C) 2011, Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Based on a driver authored by Dongsoo Nathaniel Kim.
+ * Copyright (C) 2009, Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/media.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5k6aa.h>
+
+static int debug;
+module_param(debug, int, 0644);
+
+#define DRIVER_NAME			"S5K6AA"
+
+/* The token to indicate array termination */
+#define S5K6AA_TERM			0xffff
+#define S5K6AA_OUT_WIDTH_DEF		640
+#define S5K6AA_OUT_HEIGHT_DEF		480
+#define S5K6AA_WIN_WIDTH_MAX		1280
+#define S5K6AA_WIN_HEIGHT_MAX		1024
+#define S5K6AA_WIN_WIDTH_MIN		8
+#define S5K6AA_WIN_HEIGHT_MIN		8
+
+/*
+ * H/W register Interface (0xD0000000 - 0xD0000FFF)
+ */
+#define AHB_MSB_ADDR_PTR		0xfcfc
+#define GEN_REG_OFFSH			0xd000
+#define REG_CMDWR_ADDRH			0x0028
+#define REG_CMDWR_ADDRL			0x002a
+#define REG_CMDRD_ADDRH			0x002c
+#define REG_CMDRD_ADDRL			0x002e
+#define REG_CMDBUF0_ADDR		0x0f12
+#define REG_CMDBUF1_ADDR		0x0f10
+
+/*
+ * Host S/W Register interface (0x70000000 - 0x70002000)
+ * The value of the two most significant address bytes is 0x7000,
+ * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs.
+ */
+#define HOST_SWIF_OFFSH			0x7000
+
+/* Initialization parameters */
+/* Master clock frequency in KHz */
+#define REG_I_INCLK_FREQ_L		0x01b8
+#define REG_I_INCLK_FREQ_H		0x01ba
+#define  MIN_MCLK_FREQ_KHZ		6000U
+#define  MAX_MCLK_FREQ_KHZ		27000U
+#define REG_I_USE_NPVI_CLOCKS		0x01c6
+#define REG_I_USE_NMIPI_CLOCKS		0x01c8
+
+/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */
+#define REG_I_OPCLK_4KHZ(n)		((n) * 6 + 0x01cc)
+#define REG_I_MIN_OUTRATE_4KHZ(n)	((n) * 6 + 0x01ce)
+#define REG_I_MAX_OUTRATE_4KHZ(n)	((n) * 6 + 0x01d0)
+#define  SYS_PLL_OUT_FREQ		(48000000 / 4000)
+#define  PCLK_FREQ_MIN			(24000000 / 4000)
+#define  PCLK_FREQ_MAX			(48000000 / 4000)
+#define REG_I_INIT_PARAMS_UPDATED	0x01e0
+#define REG_I_ERROR_INFO		0x01e2
+
+/* General purpose parameters */
+#define REG_USER_BRIGHTNESS		0x01e4
+#define REG_USER_CONTRAST		0x01e6
+#define REG_USER_SATURATION		0x01e8
+#define REG_USER_SHARPBLUR		0x01ea
+
+#define REG_G_SPEC_EFFECTS		0x01ee
+#define REG_G_ENABLE_PREV		0x01f0
+#define REG_G_ENABLE_PREV_CHG		0x01f2
+#define REG_G_NEW_CFG_SYNC		0x01f8
+#define REG_G_PREVZOOM_IN_WIDTH		0x020a
+#define REG_G_PREVZOOM_IN_HEIGHT	0x020c
+#define REG_G_PREVZOOM_IN_XOFFS		0x020e
+#define REG_G_PREVZOOM_IN_YOFFS		0x0210
+#define REG_G_INPUTS_CHANGE_REQ		0x021a
+#define REG_G_ACTIVE_PREV_CFG		0x021c
+#define REG_G_PREV_CFG_CHG		0x021e
+#define REG_G_PREV_OPEN_AFTER_CH	0x0220
+#define REG_G_PREV_CFG_ERROR		0x0222
+
+/* Preview control section. n = 0...4. */
+#define PREG(n, x)			((n) * 0x26 + x)
+#define REG_P_OUT_WIDTH(n)		PREG(n, 0x0242)
+#define REG_P_OUT_HEIGHT(n)		PREG(n, 0x0244)
+#define REG_P_FMT(n)			PREG(n, 0x0246)
+#define REG_P_MAX_OUT_RATE(n)		PREG(n, 0x0248)
+#define REG_P_MIN_OUT_RATE(n)		PREG(n, 0x024a)
+#define REG_P_PVI_MASK(n)		PREG(n, 0x024c)
+#define REG_P_CLK_INDEX(n)		PREG(n, 0x024e)
+#define REG_P_FR_RATE_TYPE(n)		PREG(n, 0x0250)
+#define  FR_RATE_DYNAMIC		0
+#define  FR_RATE_FIXED			1
+#define  FR_RATE_FIXED_ACCURATE		2
+#define REG_P_FR_RATE_Q_TYPE(n)		PREG(n, 0x0252)
+#define  FR_RATE_Q_BEST_FRRATE		1 /* Binning enabled */
+#define  FR_RATE_Q_BEST_QUALITY		2 /* Binning disabled */
+/* Frame period in 0.1 ms units */
+#define REG_P_MAX_FR_TIME(n)		PREG(n, 0x0254)
+#define REG_P_MIN_FR_TIME(n)		PREG(n, 0x0256)
+/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */
+#define  US_TO_FR_TIME(__t)		((__t) / 100)
+#define  S5K6AA_MIN_FR_TIME		33300  /* us */
+#define  S5K6AA_MAX_FR_TIME		650000 /* us */
+#define  S5K6AA_MAX_HIGHRES_FR_TIME	666    /* x100 us */
+/* The below 5 registers are for "device correction" values */
+#define REG_P_COLORTEMP(n)		PREG(n, 0x025e)
+#define REG_P_PREV_MIRROR(n)		PREG(n, 0x0262)
+
+/* Extended image property controls */
+/* Exposure time in 10 us units */
+#define REG_SF_USR_EXPOSURE_L		0x03c6
+#define REG_SF_USR_EXPOSURE_H		0x03c8
+#define REG_SF_USR_EXPOSURE_CHG		0x03ca
+#define REG_SF_USR_TOT_GAIN		0x03cc
+#define REG_SF_USR_TOT_GAIN_CHG		0x03ce
+#define REG_SF_RGAIN			0x03d0
+#define REG_SF_RGAIN_CHG		0x03d2
+#define REG_SF_GGAIN			0x03d4
+#define REG_SF_GGAIN_CHG		0x03d6
+#define REG_SF_BGAIN			0x03d8
+#define REG_SF_BGAIN_CHG		0x03da
+#define REG_SF_FLICKER_QUANT		0x03dc
+#define REG_SF_FLICKER_QUANT_CHG	0x03de
+
+/* Output interface (parallel/MIPI) setup */
+#define REG_OIF_EN_MIPI_LANES		0x03fa
+#define REG_OIF_EN_PACKETS		0x03fc
+#define REG_OIF_CFG_CHG			0x03fe
+
+/* Auto-algorithms enable mask */
+#define REG_DBG_AUTOALG_EN		0x0400
+#define  AALG_ALL_EN_MASK		(1 << 0)
+#define  AALG_AE_EN_MASK		(1 << 1)
+#define  AALG_DIVLEI_EN_MASK		(1 << 2)
+#define  AALG_WB_EN_MASK		(1 << 3)
+#define  AALG_FLICKER_EN_MASK		(1 << 5)
+#define  AALG_FIT_EN_MASK		(1 << 6)
+#define  AALG_WRHW_EN_MASK		(1 << 7)
+
+/* Firmware revision information */
+#define REG_FW_APIVER			0x012e
+#define  S5K6AAFX_FW_APIVER		0x0001
+#define REG_FW_REVISION			0x0130
+
+/* For now we use only one user configuration register set */
+#define S5K6AA_MAX_PRESETS		1
+
+static const char * const s5k6aa_supply_names[] = {
+	"vdd_core",	/* Digital core supply 1.5V (1.4V to 1.6V) */
+	"vdda",		/* Analog power supply 2.8V (2.6V to 3.0V) */
+	"vdd_reg",	/* Regulator input power 1.8V (1.7V to 1.9V)
+			   or 2.8V (2.6V to 3.0) */
+	"vddio",	/* I/O supply 1.8V (1.65V to 1.95V)
+			   or 2.8V (2.5V to 3.1V) */
+};
+#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names)
+
+enum s5k6aa_gpio_id {
+	STBY,
+	RST,
+	GPIO_NUM,
+};
+
+struct s5k6aa_regval {
+	u16 addr;
+	u16 val;
+};
+
+struct s5k6aa_pixfmt {
+	enum v4l2_mbus_pixelcode code;
+	u32 colorspace;
+	/* REG_P_FMT(x) register value */
+	u16 reg_p_fmt;
+};
+
+struct s5k6aa_preset {
+	/* output pixel format and resolution */
+	struct v4l2_mbus_framefmt mbus_fmt;
+	u8 clk_id;
+	u8 index;
+};
+
+struct s5k6aa_ctrls {
+	struct v4l2_ctrl_handler handler;
+	/* Auto / manual white balance cluster */
+	struct v4l2_ctrl *awb;
+	struct v4l2_ctrl *gain_red;
+	struct v4l2_ctrl *gain_blue;
+	struct v4l2_ctrl *gain_green;
+	/* Mirror cluster */
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+	/* Auto exposure / manual exposure and gain cluster */
+	struct v4l2_ctrl *auto_exp;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *gain;
+};
+
+struct s5k6aa_interval {
+	u16 reg_fr_time;
+	struct v4l2_fract interval;
+	/* Maximum rectangle for the interval */
+	struct v4l2_frmsize_discrete size;
+};
+
+struct s5k6aa {
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	enum v4l2_mbus_type bus_type;
+	u8 mipi_lanes;
+
+	int (*s_power)(int enable);
+	struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES];
+	struct s5k6aa_gpio gpio[GPIO_NUM];
+
+	/* external master clock frequency */
+	unsigned long mclk_frequency;
+	/* ISP internal master clock frequency */
+	u16 clk_fop;
+	/* output pixel clock frequency range */
+	u16 pclk_fmin;
+	u16 pclk_fmax;
+
+	unsigned int inv_hflip:1;
+	unsigned int inv_vflip:1;
+
+	/* protects the struct members below */
+	struct mutex lock;
+
+	/* sensor matrix scan window */
+	struct v4l2_rect ccd_rect;
+
+	struct s5k6aa_ctrls ctrls;
+	struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS];
+	struct s5k6aa_preset *preset;
+	const struct s5k6aa_interval *fiv;
+
+	unsigned int streaming:1;
+	unsigned int apply_cfg:1;
+	unsigned int apply_crop:1;
+	unsigned int power;
+};
+
+static struct s5k6aa_regval s5k6aa_analog_config[] = {
+	/* Analog settings */
+	{ 0x112a, 0x0000 }, { 0x1132, 0x0000 },
+	{ 0x113e, 0x0000 }, { 0x115c, 0x0000 },
+	{ 0x1164, 0x0000 }, { 0x1174, 0x0000 },
+	{ 0x1178, 0x0000 }, { 0x077a, 0x0000 },
+	{ 0x077c, 0x0000 }, { 0x077e, 0x0000 },
+	{ 0x0780, 0x0000 }, { 0x0782, 0x0000 },
+	{ 0x0784, 0x0000 }, { 0x0786, 0x0000 },
+	{ 0x0788, 0x0000 }, { 0x07a2, 0x0000 },
+	{ 0x07a4, 0x0000 }, { 0x07a6, 0x0000 },
+	{ 0x07a8, 0x0000 }, { 0x07b6, 0x0000 },
+	{ 0x07b8, 0x0002 }, { 0x07ba, 0x0004 },
+	{ 0x07bc, 0x0004 }, { 0x07be, 0x0005 },
+	{ 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 },
+};
+
+/* TODO: Add RGB888 and Bayer format */
+static const struct s5k6aa_pixfmt s5k6aa_formats[] = {
+	{ V4L2_MBUS_FMT_YUYV8_2X8,	V4L2_COLORSPACE_JPEG,	5 },
+	/* range 16-240 */
+	{ V4L2_MBUS_FMT_YUYV8_2X8,	V4L2_COLORSPACE_REC709,	6 },
+	{ V4L2_MBUS_FMT_RGB565_2X8_BE,	V4L2_COLORSPACE_JPEG,	0 },
+};
+
+static const struct s5k6aa_interval s5k6aa_intervals[] = {
+	{ 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */
+	{ 666,  {15000, 1000000}, {1280, 1024} }, /* 15 fps */
+	{ 500,  {20000, 1000000}, {1280, 720} },  /* 20 fps */
+	{ 400,  {25000, 1000000}, {640, 480} },   /* 25 fps */
+	{ 333,  {33300, 1000000}, {640, 480} },   /* 30 fps */
+};
+
+#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */
+
+static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
+{
+	return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd;
+}
+
+static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct s5k6aa, sd);
+}
+
+/* Set initial values for all preview presets */
+static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa)
+{
+	struct s5k6aa_preset *preset = &s5k6aa->presets[0];
+	int i;
+
+	for (i = 0; i < S5K6AA_MAX_PRESETS; i++) {
+		preset->mbus_fmt.width	= S5K6AA_OUT_WIDTH_DEF;
+		preset->mbus_fmt.height	= S5K6AA_OUT_HEIGHT_DEF;
+		preset->mbus_fmt.code	= s5k6aa_formats[0].code;
+		preset->index		= i;
+		preset->clk_id		= 0;
+		preset++;
+	}
+
+	s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX];
+	s5k6aa->preset = &s5k6aa->presets[0];
+}
+
+static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
+{
+	u8 wbuf[2] = {addr >> 8, addr & 0xFF};
+	struct i2c_msg msg[2];
+	u8 rbuf[2];
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 2;
+	msg[0].buf = wbuf;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = 2;
+	msg[1].buf = rbuf;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	*val = be16_to_cpu(*((u16 *)rbuf));
+
+	v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
+
+	return ret == 2 ? 0 : ret;
+}
+
+static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val)
+{
+	u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF};
+
+	int ret = i2c_master_send(client, buf, 4);
+	v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val);
+
+	return ret == 4 ? 0 : ret;
+}
+
+/* The command register write, assumes Command_Wr_addH = 0x7000. */
+static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val)
+{
+	int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr);
+	if (ret)
+		return ret;
+	return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val);
+}
+
+/* The command register read, assumes Command_Rd_addH = 0x7000. */
+static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val)
+{
+	int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr);
+	if (ret)
+		return ret;
+	return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val);
+}
+
+static int s5k6aa_write_array(struct v4l2_subdev *sd,
+			      const struct s5k6aa_regval *msg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u16 addr_incr = 0;
+	int ret = 0;
+
+	while (msg->addr != S5K6AA_TERM) {
+		if (addr_incr != 2)
+			ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL,
+					       msg->addr);
+		if (ret)
+			break;
+		ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val);
+		if (ret)
+			break;
+		/* Assume that msg->addr is always less than 0xfffc */
+		addr_incr = (msg + 1)->addr - msg->addr;
+		msg++;
+	}
+
+	return ret;
+}
+
+/* Configure the AHB high address bytes for GTG registers access */
+static int s5k6aa_set_ahb_address(struct i2c_client *client)
+{
+	int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
+	if (ret)
+		return ret;
+	ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH);
+	if (ret)
+		return ret;
+	return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH);
+}
+
+/**
+ * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
+ *
+ * Configure the internal ISP PLL for the required output frequency.
+ * Locking: called with s5k6aa.lock mutex held.
+ */
+static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+	unsigned long fmclk = s5k6aa->mclk_frequency / 1000;
+	u16 status;
+	int ret;
+
+	if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ,
+		 "Invalid clock frequency: %ld\n", fmclk))
+		return -EINVAL;
+
+	s5k6aa->pclk_fmin = PCLK_FREQ_MIN;
+	s5k6aa->pclk_fmax = PCLK_FREQ_MAX;
+	s5k6aa->clk_fop = SYS_PLL_OUT_FREQ;
+
+	/* External input clock frequency in kHz */
+	ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1);
+	/* Internal PLL frequency */
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0),
+				   s5k6aa->pclk_fmin);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0),
+				   s5k6aa->pclk_fmax);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1);
+	if (!ret)
+		ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status);
+
+	return ret ? ret : (status ? -EINVAL : 0);
+}
+
+/* Set horizontal and vertical image flipping */
+static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	int index = s5k6aa->preset->index;
+
+	unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip;
+	unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1);
+
+	return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip);
+}
+
+/* Configure auto/manual white balance and R/G/B gains */
+static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+	struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
+	u16 reg;
+
+	int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &reg);
+
+	if (!ret && !awb) {
+		ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val);
+		if (!ret)
+			ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1);
+		if (ret)
+			return ret;
+
+		ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val);
+		if (!ret)
+			ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1);
+		if (ret)
+			return ret;
+
+		ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val);
+		if (!ret)
+			ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1);
+	}
+	if (!ret) {
+		reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK;
+		ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg);
+	}
+
+	return ret;
+}
+
+/* Program FW with exposure time, 'exposure' in us units */
+static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure)
+{
+	unsigned int time = exposure / 10;
+
+	int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16);
+	if (ret)
+		return ret;
+	return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1);
+}
+
+static int s5k6aa_set_user_gain(struct i2c_client *client, int gain)
+{
+	int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain);
+	if (ret)
+		return ret;
+	return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1);
+}
+
+/* Set auto/manual exposure and total gain */
+static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+	unsigned int exp_time = s5k6aa->ctrls.exposure->val;
+	u16 auto_alg;
+
+	int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg);
+	if (ret)
+		return ret;
+
+	v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n",
+		 exp_time, value, auto_alg);
+
+	if (value == V4L2_EXPOSURE_AUTO) {
+		auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK;
+	} else {
+		ret = s5k6aa_set_user_exposure(c, exp_time);
+		if (ret)
+			return ret;
+		ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val);
+		if (ret)
+			return ret;
+		auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK);
+	}
+
+	return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg);
+}
+
+static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	u16 auto_alg;
+	int ret;
+
+	ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg);
+	if (ret)
+		return ret;
+
+	if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) {
+		auto_alg |= AALG_FLICKER_EN_MASK;
+	} else {
+		auto_alg &= ~AALG_FLICKER_EN_MASK;
+		/* The V4L2_CID_LINE_FREQUENCY control values match
+		 * the register values */
+		ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value);
+		if (ret)
+			return ret;
+		ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1);
+		if (ret)
+			return ret;
+	}
+
+	return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg);
+}
+
+static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	static const struct v4l2_control colorfx[] = {
+		{ V4L2_COLORFX_NONE,	 0 },
+		{ V4L2_COLORFX_BW,	 1 },
+		{ V4L2_COLORFX_NEGATIVE, 2 },
+		{ V4L2_COLORFX_SEPIA,	 3 },
+		{ V4L2_COLORFX_SKY_BLUE, 4 },
+		{ V4L2_COLORFX_SKETCH,	 5 },
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(colorfx); i++) {
+		if (colorfx[i].id == val)
+			return s5k6aa_write(client, REG_G_SPEC_EFFECTS,
+					    colorfx[i].value);
+	}
+	return -EINVAL;
+}
+
+static int s5k6aa_preview_config_status(struct i2c_client *client)
+{
+	u16 error = 0;
+	int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error);
+
+	v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret);
+	return ret ? ret : (error ? -EINVAL : 0);
+}
+
+static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa,
+				   struct v4l2_mbus_framefmt *mf)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++)
+		if (mf->colorspace == s5k6aa_formats[i].colorspace &&
+		    mf->code == s5k6aa_formats[i].code)
+			return i;
+	return 0;
+}
+
+static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa,
+				      struct s5k6aa_preset *preset)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt);
+	int ret;
+
+	ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index),
+			   preset->mbus_fmt.width);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index),
+				   preset->mbus_fmt.height);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_FMT(preset->index),
+				   s5k6aa_formats[fmt_index].reg_p_fmt);
+	return ret;
+}
+
+static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
+{
+	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+	struct v4l2_rect *r = &s5k6aa->ccd_rect;
+	int ret;
+
+	ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
+	if (!ret)
+		ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1);
+	if (!ret)
+		s5k6aa->apply_crop = 0;
+
+	return ret;
+}
+
+/**
+ * s5k6aa_configure_video_bus - configure the video output interface
+ * @bus_type: video bus type: parallel or MIPI-CSI
+ * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
+ *
+ * Note: Only parallel bus operation has been tested.
+ */
+static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
+				      enum v4l2_mbus_type bus_type, int nlanes)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	u16 cfg = 0;
+	int ret;
+
+	/*
+	 * TODO: The sensor is supposed to support BT.601 and BT.656
+	 * but there is nothing indicating how to switch between both
+	 * in the datasheet. For now default BT.601 interface is assumed.
+	 */
+	if (bus_type == V4L2_MBUS_CSI2)
+		cfg = nlanes;
+	else if (bus_type != V4L2_MBUS_PARALLEL)
+		return -EINVAL;
+
+	ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg);
+	if (ret)
+		return ret;
+	return s5k6aa_write(client, REG_OIF_CFG_CHG, 1);
+}
+
+/* This function should be called when switching to new user configuration set*/
+static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
+				  int cid)
+{
+	unsigned long end = jiffies + msecs_to_jiffies(timeout);
+	u16 reg = 1;
+	int ret;
+
+	ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1);
+	if (timeout == 0)
+		return ret;
+
+	while (ret >= 0 && time_is_after_jiffies(end)) {
+		ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, &reg);
+		if (!reg)
+			return 0;
+		usleep_range(1000, 5000);
+	}
+	return ret ? ret : -ETIMEDOUT;
+}
+
+/**
+ * s5k6aa_set_prev_config - write user preview register set
+ *
+ * Configure output resolution and color fromat, pixel clock
+ * frequency range, device frame rate type and frame period range.
+ */
+static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
+				  struct s5k6aa_preset *preset)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	int idx = preset->index;
+	u16 frame_rate_q;
+	int ret;
+
+	if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME)
+		frame_rate_q = FR_RATE_Q_BEST_FRRATE;
+	else
+		frame_rate_q = FR_RATE_Q_BEST_QUALITY;
+
+	ret = s5k6aa_set_output_framefmt(s5k6aa, preset);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx),
+				   s5k6aa->pclk_fmax);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx),
+				   s5k6aa->pclk_fmin);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx),
+				   preset->clk_id);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx),
+				   FR_RATE_DYNAMIC);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx),
+				   frame_rate_q);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx),
+				   s5k6aa->fiv->reg_fr_time + 33);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx),
+				   s5k6aa->fiv->reg_fr_time - 33);
+	if (!ret)
+		ret = s5k6aa_new_config_sync(client, 250, idx);
+	if (!ret)
+		ret = s5k6aa_preview_config_status(client);
+	if (!ret)
+		s5k6aa->apply_cfg = 0;
+
+	v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n",
+		 s5k6aa->fiv->reg_fr_time, ret);
+	return ret;
+}
+
+/**
+ * s5k6aa_initialize_isp - basic ISP MCU initialization
+ *
+ * Configure AHB addresses for registers read/write; configure PLLs for
+ * required output pixel clock. The ISP power supply needs to be already
+ * enabled, with an optional H/W reset.
+ * Locking: called with s5k6aa.lock mutex held.
+ */
+static int s5k6aa_initialize_isp(struct v4l2_subdev *sd)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int ret;
+
+	s5k6aa->apply_crop = 1;
+	s5k6aa->apply_cfg = 1;
+	msleep(100);
+
+	ret = s5k6aa_set_ahb_address(client);
+	if (ret)
+		return ret;
+	ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type,
+					 s5k6aa->mipi_lanes);
+	if (ret)
+		return ret;
+	ret = s5k6aa_write_array(sd, s5k6aa_analog_config);
+	if (ret)
+		return ret;
+	msleep(20);
+
+	return s5k6aa_configure_pixel_clocks(s5k6aa);
+}
+
+static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val)
+{
+	if (!gpio_is_valid(priv->gpio[id].gpio))
+		return 0;
+	gpio_set_value(priv->gpio[id].gpio, !!val);
+	return 1;
+}
+
+static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id)
+{
+	return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level);
+}
+
+static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id)
+{
+	return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level);
+}
+
+static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+	if (ret)
+		return ret;
+	if (s5k6aa_gpio_deassert(s5k6aa, STBY))
+		usleep_range(150, 200);
+
+	if (s5k6aa->s_power)
+		ret = s5k6aa->s_power(1);
+	usleep_range(4000, 4000);
+
+	if (s5k6aa_gpio_deassert(s5k6aa, RST))
+		msleep(20);
+
+	return ret;
+}
+
+static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
+{
+	int ret;
+
+	if (s5k6aa_gpio_assert(s5k6aa, RST))
+		usleep_range(100, 150);
+
+	if (s5k6aa->s_power) {
+		ret = s5k6aa->s_power(0);
+		if (ret)
+			return ret;
+	}
+	if (s5k6aa_gpio_assert(s5k6aa, STBY))
+		usleep_range(50, 100);
+	s5k6aa->streaming = 0;
+
+	return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+}
+
+/*
+ * V4L2 subdev core and video operations
+ */
+static int s5k6aa_set_power(struct v4l2_subdev *sd, int on)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int ret = 0;
+
+	mutex_lock(&s5k6aa->lock);
+
+	if (!on == s5k6aa->power) {
+		if (on) {
+			ret = __s5k6aa_power_on(s5k6aa);
+			if (!ret)
+				ret = s5k6aa_initialize_isp(sd);
+		} else {
+			ret = __s5k6aa_power_off(s5k6aa);
+		}
+
+		if (!ret)
+			s5k6aa->power += on ? 1 : -1;
+	}
+
+	mutex_unlock(&s5k6aa->lock);
+
+	if (!on || ret || s5k6aa->power != 1)
+		return ret;
+
+	return v4l2_ctrl_handler_setup(sd->ctrl_handler);
+}
+
+static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	int ret = 0;
+
+	ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable);
+	if (!ret)
+		ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1);
+	if (!ret)
+		s5k6aa->streaming = enable;
+
+	return ret;
+}
+
+static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int ret = 0;
+
+	mutex_lock(&s5k6aa->lock);
+
+	if (s5k6aa->streaming == !on) {
+		if (!ret && s5k6aa->apply_cfg)
+			ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset);
+		if (s5k6aa->apply_crop)
+			ret = s5k6aa_set_input_params(s5k6aa);
+		if (!ret)
+			ret = __s5k6aa_stream(s5k6aa, !!on);
+	}
+	mutex_unlock(&s5k6aa->lock);
+
+	return ret;
+}
+
+static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_frame_interval *fi)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+
+	mutex_lock(&s5k6aa->lock);
+	fi->interval = s5k6aa->fiv->interval;
+	mutex_unlock(&s5k6aa->lock);
+
+	return 0;
+}
+
+static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa,
+				       struct v4l2_subdev_frame_interval *fi)
+{
+	struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt;
+	const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0];
+	unsigned int err, min_err = UINT_MAX;
+	unsigned int i, fr_time;
+
+	if (fi->interval.denominator == 0)
+		return -EINVAL;
+
+	fr_time = fi->interval.numerator * 10000 / fi->interval.denominator;
+
+	for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) {
+		const struct s5k6aa_interval *iv = &s5k6aa_intervals[i];
+
+		if (mbus_fmt->width > iv->size.width ||
+		    mbus_fmt->height > iv->size.height)
+			continue;
+
+		err = abs(iv->reg_fr_time - fr_time);
+		if (err < min_err) {
+			fiv = iv;
+			min_err = err;
+		}
+	}
+	s5k6aa->fiv = fiv;
+
+	v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n",
+		 fiv->reg_fr_time * 100);
+	return 0;
+}
+
+static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_frame_interval *fi)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int ret;
+
+	v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
+		 fi->interval.numerator, fi->interval.denominator);
+
+	mutex_lock(&s5k6aa->lock);
+	ret = __s5k6aa_set_frame_interval(s5k6aa, fi);
+	s5k6aa->apply_cfg = 1;
+
+	mutex_unlock(&s5k6aa->lock);
+	return ret;
+}
+
+/*
+ * V4L2 subdev pad level and video operations
+ */
+static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_frame_interval_enum *fie)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	const struct s5k6aa_interval *fi;
+	int ret = 0;
+
+	if (fie->index > ARRAY_SIZE(s5k6aa_intervals))
+		return -EINVAL;
+
+	v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN,
+			      S5K6AA_WIN_WIDTH_MAX, 1,
+			      &fie->height, S5K6AA_WIN_HEIGHT_MIN,
+			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+	mutex_lock(&s5k6aa->lock);
+	fi = &s5k6aa_intervals[fie->index];
+	if (fie->width > fi->size.width || fie->height > fi->size.height)
+		ret = -EINVAL;
+	else
+		fie->interval = fi->interval;
+	mutex_unlock(&s5k6aa->lock);
+
+	return ret;
+}
+
+static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(s5k6aa_formats))
+		return -EINVAL;
+
+	code->code = s5k6aa_formats[code->index].code;
+	return 0;
+}
+
+static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	int i = ARRAY_SIZE(s5k6aa_formats);
+
+	if (fse->index > 0)
+		return -EINVAL;
+
+	while (--i)
+		if (fse->code == s5k6aa_formats[i].code)
+			break;
+
+	fse->code = s5k6aa_formats[i].code;
+	fse->min_width  = S5K6AA_WIN_WIDTH_MIN;
+	fse->max_width  = S5K6AA_WIN_WIDTH_MAX;
+	fse->max_height = S5K6AA_WIN_HEIGHT_MIN;
+	fse->min_height = S5K6AA_WIN_HEIGHT_MAX;
+
+	return 0;
+}
+
+static struct v4l2_rect *
+__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh,
+		       enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return &s5k6aa->ccd_rect;
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_crop(fh, 0);
+
+	return NULL;
+}
+
+static void s5k6aa_try_format(struct s5k6aa *s5k6aa,
+			      struct v4l2_mbus_framefmt *mf)
+{
+	unsigned int index;
+
+	v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN,
+			      S5K6AA_WIN_WIDTH_MAX, 1,
+			      &mf->height, S5K6AA_WIN_HEIGHT_MIN,
+			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+	if (mf->colorspace != V4L2_COLORSPACE_JPEG &&
+	    mf->colorspace != V4L2_COLORSPACE_REC709)
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+
+	index = s5k6aa_get_pixfmt_index(s5k6aa, mf);
+
+	mf->colorspace	= s5k6aa_formats[index].colorspace;
+	mf->code	= s5k6aa_formats[index].code;
+	mf->field	= V4L2_FIELD_NONE;
+}
+
+static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	struct v4l2_mbus_framefmt *mf;
+
+	memset(fmt->reserved, 0, sizeof(fmt->reserved));
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf = v4l2_subdev_get_try_format(fh, 0);
+		fmt->format = *mf;
+		return 0;
+	}
+
+	mutex_lock(&s5k6aa->lock);
+	fmt->format = s5k6aa->preset->mbus_fmt;
+	mutex_unlock(&s5k6aa->lock);
+
+	return 0;
+}
+
+static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	struct s5k6aa_preset *preset = s5k6aa->preset;
+	struct v4l2_mbus_framefmt *mf;
+	struct v4l2_rect *crop;
+	int ret = 0;
+
+	mutex_lock(&s5k6aa->lock);
+	s5k6aa_try_format(s5k6aa, &fmt->format);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf = v4l2_subdev_get_try_format(fh, fmt->pad);
+		crop = v4l2_subdev_get_try_crop(fh, 0);
+	} else {
+		if (s5k6aa->streaming) {
+			ret = -EBUSY;
+		} else {
+			mf = &preset->mbus_fmt;
+			crop = &s5k6aa->ccd_rect;
+			s5k6aa->apply_cfg = 1;
+		}
+	}
+
+	if (ret == 0) {
+		struct v4l2_subdev_frame_interval fiv = {
+			.interval = {0, 1}
+		};
+
+		*mf = fmt->format;
+		/*
+		 * Make sure the crop window is valid, i.e. its size is
+		 * greater than the output window, as the ISP supports
+		 * only down-scaling.
+		 */
+		crop->width = clamp_t(unsigned int, crop->width, mf->width,
+				      S5K6AA_WIN_WIDTH_MAX);
+		crop->height = clamp_t(unsigned int, crop->height, mf->height,
+				       S5K6AA_WIN_HEIGHT_MAX);
+		crop->left = clamp_t(unsigned int, crop->left, 0,
+				     S5K6AA_WIN_WIDTH_MAX - crop->width);
+		crop->top  = clamp_t(unsigned int, crop->top, 0,
+				     S5K6AA_WIN_HEIGHT_MAX - crop->height);
+
+		/* Reset to minimum possible frame interval */
+		ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv);
+	}
+	mutex_unlock(&s5k6aa->lock);
+
+	return ret;
+}
+
+static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_crop *crop)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	struct v4l2_rect *rect;
+
+	memset(crop->reserved, 0, sizeof(crop->reserved));
+	mutex_lock(&s5k6aa->lock);
+
+	rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
+	if (rect)
+		crop->rect = *rect;
+
+	mutex_unlock(&s5k6aa->lock);
+
+	v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n",
+		 rect->left, rect->top, rect->width, rect->height);
+
+	return 0;
+}
+
+static int s5k6aa_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_crop *crop)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	struct v4l2_mbus_framefmt *mf;
+	unsigned int max_x, max_y;
+	struct v4l2_rect *crop_r;
+
+	mutex_lock(&s5k6aa->lock);
+	crop_r = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
+
+	if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		mf = &s5k6aa->preset->mbus_fmt;
+		s5k6aa->apply_crop = 1;
+	} else {
+		mf = v4l2_subdev_get_try_format(fh, 0);
+	}
+	v4l_bound_align_image(&crop->rect.width, mf->width,
+			      S5K6AA_WIN_WIDTH_MAX, 1,
+			      &crop->rect.height, mf->height,
+			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+	max_x = (S5K6AA_WIN_WIDTH_MAX - crop->rect.width) & ~1;
+	max_y = (S5K6AA_WIN_HEIGHT_MAX - crop->rect.height) & ~1;
+
+	crop->rect.left = clamp_t(unsigned int, crop->rect.left, 0, max_x);
+	crop->rect.top  = clamp_t(unsigned int, crop->rect.top, 0, max_y);
+
+	*crop_r = crop->rect;
+
+	mutex_unlock(&s5k6aa->lock);
+
+	v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n",
+		 crop_r->left, crop_r->top, crop_r->width, crop_r->height);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = {
+	.enum_mbus_code		= s5k6aa_enum_mbus_code,
+	.enum_frame_size	= s5k6aa_enum_frame_size,
+	.enum_frame_interval	= s5k6aa_enum_frame_interval,
+	.get_fmt		= s5k6aa_get_fmt,
+	.set_fmt		= s5k6aa_set_fmt,
+	.get_crop		= s5k6aa_get_crop,
+	.set_crop		= s5k6aa_set_crop,
+};
+
+static const struct v4l2_subdev_video_ops s5k6aa_video_ops = {
+	.g_frame_interval	= s5k6aa_g_frame_interval,
+	.s_frame_interval	= s5k6aa_s_frame_interval,
+	.s_stream		= s5k6aa_s_stream,
+};
+
+/*
+ * V4L2 subdev controls
+ */
+
+static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int idx, err = 0;
+
+	v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
+
+	mutex_lock(&s5k6aa->lock);
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any controls to H/W at this time. Instead
+	 * the controls will be restored right after power-up.
+	 */
+	if (s5k6aa->power == 0)
+		goto unlock;
+	idx = s5k6aa->preset->index;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		err = s5k6aa_set_awb(s5k6aa, ctrl->val);
+		break;
+
+	case V4L2_CID_BRIGHTNESS:
+		err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val);
+		break;
+
+	case V4L2_CID_COLORFX:
+		err = s5k6aa_set_colorfx(s5k6aa, ctrl->val);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val);
+		break;
+
+	case V4L2_CID_EXPOSURE_AUTO:
+		err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val);
+		break;
+
+	case V4L2_CID_HFLIP:
+		err = s5k6aa_set_mirror(s5k6aa, ctrl->val);
+		if (err)
+			break;
+		err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+		break;
+
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val);
+		break;
+
+	case V4L2_CID_SATURATION:
+		err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val);
+		break;
+
+	case V4L2_CID_SHARPNESS:
+		err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val);
+		break;
+
+	case V4L2_CID_WHITE_BALANCE_TEMPERATURE:
+		err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val);
+		if (err)
+			break;
+		err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+		break;
+	}
+unlock:
+	mutex_unlock(&s5k6aa->lock);
+	return err;
+}
+
+static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = {
+	.s_ctrl	= s5k6aa_s_ctrl,
+};
+
+static int s5k6aa_log_status(struct v4l2_subdev *sd)
+{
+	v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
+	return 0;
+}
+
+#define V4L2_CID_RED_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1001)
+#define V4L2_CID_GREEN_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1002)
+#define V4L2_CID_BLUE_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1003)
+
+static const struct v4l2_ctrl_config s5k6aa_ctrls[] = {
+	{
+		.ops	= &s5k6aa_ctrl_ops,
+		.id	= V4L2_CID_RED_GAIN,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.name	= "Gain, Red",
+		.min	= 0,
+		.max	= 256,
+		.def	= 127,
+		.step	= 1,
+	}, {
+		.ops	= &s5k6aa_ctrl_ops,
+		.id	= V4L2_CID_GREEN_GAIN,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.name	= "Gain, Green",
+		.min	= 0,
+		.max	= 256,
+		.def	= 127,
+		.step	= 1,
+	}, {
+		.ops	= &s5k6aa_ctrl_ops,
+		.id	= V4L2_CID_BLUE_GAIN,
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.name	= "Gain, Blue",
+		.min	= 0,
+		.max	= 256,
+		.def	= 127,
+		.step	= 1,
+	},
+};
+
+static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa)
+{
+	const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops;
+	struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
+	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
+
+	int ret = v4l2_ctrl_handler_init(hdl, 16);
+	if (ret)
+		return ret;
+	/* Auto white balance cluster */
+	ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE,
+				       0, 1, 1, 1);
+	ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL);
+	ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL);
+	ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL);
+	v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false);
+
+	ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+	ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_cluster(2, &ctrls->hflip);
+
+	ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
+				V4L2_CID_EXPOSURE_AUTO,
+				V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
+	/* Exposure time: x 1 us */
+	ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
+					    0, 6000000U, 1, 100000U);
+	/* Total gain: 256 <=> 1x */
+	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
+					0, 256, 1, 256);
+	v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false);
+
+	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
+			       V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
+			       V4L2_CID_POWER_LINE_FREQUENCY_AUTO);
+
+	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
+			       V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE);
+
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+			  0, 256, 1, 0);
+
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
+
+	if (hdl->error) {
+		ret = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		return ret;
+	}
+
+	s5k6aa->sd.ctrl_handler = hdl;
+	return 0;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+	struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0);
+
+	format->colorspace = s5k6aa_formats[0].colorspace;
+	format->code = s5k6aa_formats[0].code;
+	format->width = S5K6AA_OUT_WIDTH_DEF;
+	format->height = S5K6AA_OUT_HEIGHT_DEF;
+	format->field = V4L2_FIELD_NONE;
+
+	crop->width = S5K6AA_WIN_WIDTH_MAX;
+	crop->height = S5K6AA_WIN_HEIGHT_MAX;
+	crop->left = 0;
+	crop->top = 0;
+
+	return 0;
+}
+
+int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+	u16 api_ver = 0, fw_rev = 0;
+
+	int ret = s5k6aa_set_ahb_address(client);
+
+	if (!ret)
+		ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver);
+	if (!ret)
+		ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev);
+	if (ret) {
+		v4l2_err(&s5k6aa->sd, "FW revision check failed!\n");
+		return ret;
+	}
+
+	v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n",
+		  api_ver, fw_rev);
+
+	return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV;
+}
+
+static int s5k6aa_registered(struct v4l2_subdev *sd)
+{
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+	int ret;
+
+	mutex_lock(&s5k6aa->lock);
+	ret = __s5k6aa_power_on(s5k6aa);
+	if (!ret) {
+		msleep(100);
+		ret = s5k6aa_check_fw_revision(s5k6aa);
+		__s5k6aa_power_off(s5k6aa);
+	}
+	mutex_unlock(&s5k6aa->lock);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = {
+	.registered = s5k6aa_registered,
+	.open = s5k6aa_open,
+};
+
+static const struct v4l2_subdev_core_ops s5k6aa_core_ops = {
+	.s_power = s5k6aa_set_power,
+	.log_status = s5k6aa_log_status,
+};
+
+static const struct v4l2_subdev_ops s5k6aa_subdev_ops = {
+	.core = &s5k6aa_core_ops,
+	.pad = &s5k6aa_pad_ops,
+	.video = &s5k6aa_video_ops,
+};
+
+/*
+ * GPIO setup
+ */
+static int s5k6aa_configure_gpio(int nr, int val, const char *name)
+{
+	unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+	int ret;
+
+	if (!gpio_is_valid(nr))
+		return 0;
+	ret = gpio_request_one(nr, flags, name);
+	if (!ret)
+		gpio_export(nr, 0);
+	return ret;
+}
+
+static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5k6aa->gpio); i++) {
+		if (!gpio_is_valid(s5k6aa->gpio[i].gpio))
+			continue;
+		gpio_free(s5k6aa->gpio[i].gpio);
+		s5k6aa->gpio[i].gpio = -EINVAL;
+	}
+}
+
+static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
+				  const struct s5k6aa_platform_data *pdata)
+{
+	const struct s5k6aa_gpio *gpio = &pdata->gpio_stby;
+	int ret;
+
+	s5k6aa->gpio[STBY].gpio = -EINVAL;
+	s5k6aa->gpio[RST].gpio  = -EINVAL;
+
+	ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY");
+	if (ret) {
+		s5k6aa_free_gpios(s5k6aa);
+		return ret;
+	}
+	s5k6aa->gpio[STBY] = *gpio;
+	if (gpio_is_valid(gpio->gpio))
+		gpio_set_value(gpio->gpio, 0);
+
+	gpio = &pdata->gpio_reset;
+	ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST");
+	if (ret) {
+		s5k6aa_free_gpios(s5k6aa);
+		return ret;
+	}
+	s5k6aa->gpio[RST] = *gpio;
+	if (gpio_is_valid(gpio->gpio))
+		gpio_set_value(gpio->gpio, 0);
+
+	return 0;
+}
+
+static int s5k6aa_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
+	struct v4l2_subdev *sd;
+	struct s5k6aa *s5k6aa;
+	int i, ret;
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "Platform data not specified\n");
+		return -EINVAL;
+	}
+
+	if (pdata->mclk_frequency == 0) {
+		dev_err(&client->dev, "MCLK frequency not specified\n");
+		return -EINVAL;
+	}
+
+	s5k6aa = kzalloc(sizeof(*s5k6aa), GFP_KERNEL);
+	if (!s5k6aa)
+		return -ENOMEM;
+
+	mutex_init(&s5k6aa->lock);
+
+	s5k6aa->mclk_frequency = pdata->mclk_frequency;
+	s5k6aa->bus_type = pdata->bus_type;
+	s5k6aa->mipi_lanes = pdata->nlanes;
+	s5k6aa->s_power	= pdata->set_power;
+	s5k6aa->inv_hflip = pdata->horiz_flip;
+	s5k6aa->inv_vflip = pdata->vert_flip;
+
+	sd = &s5k6aa->sd;
+	strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
+	v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops);
+
+	sd->internal_ops = &s5k6aa_subdev_internal_ops;
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE;
+	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+	ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0);
+	if (ret)
+		goto out_err1;
+
+	ret = s5k6aa_configure_gpios(s5k6aa, pdata);
+	if (ret)
+		goto out_err2;
+
+	for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++)
+		s5k6aa->supplies[i].supply = s5k6aa_supply_names[i];
+
+	ret = regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES,
+				 s5k6aa->supplies);
+	if (ret) {
+		dev_err(&client->dev, "Failed to get regulators\n");
+		goto out_err3;
+	}
+
+	ret = s5k6aa_initialize_ctrls(s5k6aa);
+	if (ret)
+		goto out_err4;
+
+	s5k6aa_presets_data_init(s5k6aa);
+
+	s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX;
+	s5k6aa->ccd_rect.height	= S5K6AA_WIN_HEIGHT_MAX;
+	s5k6aa->ccd_rect.left = 0;
+	s5k6aa->ccd_rect.top = 0;
+
+	return 0;
+
+out_err4:
+	regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+out_err3:
+	s5k6aa_free_gpios(s5k6aa);
+out_err2:
+	media_entity_cleanup(&s5k6aa->sd.entity);
+out_err1:
+	kfree(s5k6aa);
+	return ret;
+}
+
+static int s5k6aa_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	media_entity_cleanup(&sd->entity);
+	regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+	s5k6aa_free_gpios(s5k6aa);
+	kfree(s5k6aa);
+
+	return 0;
+}
+
+static const struct i2c_device_id s5k6aa_id[] = {
+	{ DRIVER_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, s5k6aa_id);
+
+
+static struct i2c_driver s5k6aa_i2c_driver = {
+	.driver = {
+		.name = DRIVER_NAME
+	},
+	.probe		= s5k6aa_probe,
+	.remove		= s5k6aa_remove,
+	.id_table	= s5k6aa_id,
+};
+
+static int __init s5k6aa_init(void)
+{
+	return i2c_add_driver(&s5k6aa_i2c_driver);
+}
+
+static void __exit s5k6aa_exit(void)
+{
+	i2c_del_driver(&s5k6aa_i2c_driver);
+}
+
+module_init(s5k6aa_init);
+module_exit(s5k6aa_exit);
+
+MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 931f469..c8d91b0 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -246,9 +246,9 @@
 	return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
 }
 
-static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
-		       unsigned int *num_planes, unsigned int sizes[],
-		       void *allocators[])
+static int queue_setup(struct vb2_queue *vq,  const struct v4l2_format *pfmt,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], void *allocators[])
 {
 	struct fimc_ctx *ctx = vq->drv_priv;
 	struct fimc_fmt *fmt = ctx->d_frame.fmt;
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 6c1c9cb..19ca6db 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -670,9 +670,9 @@
 	fimc_m2m_shutdown(priv);
 }
 
-static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
-			    unsigned int *num_planes, unsigned int sizes[],
-			    void *allocators[])
+static int fimc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+			    unsigned int *num_buffers, unsigned int *num_planes,
+			    unsigned int sizes[], void *allocators[])
 {
 	struct fimc_ctx *ctx = vb2_get_drv_priv(vq);
 	struct fimc_frame *f;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
index 5f4da80..f2481a8 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
@@ -38,7 +38,7 @@
 	 * into kernel. */
 	mfc_debug_enter();
 	err = request_firmware((const struct firmware **)&fw_blob,
-				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+				     "s5p-mfc.fw", dev->v4l2_dev.dev);
 	if (err != 0) {
 		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
 		return -EINVAL;
@@ -116,7 +116,7 @@
 	 * into kernel. */
 	mfc_debug_enter();
 	err = request_firmware((const struct firmware **)&fw_blob,
-				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+				     "s5p-mfc.fw", dev->v4l2_dev.dev);
 	if (err != 0) {
 		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
 		return -EINVAL;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index bfbe084..844a4d7 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -220,8 +220,8 @@
 	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
 	cap->version = KERNEL_VERSION(1, 0, 0);
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
-						    | V4L2_CAP_STREAMING;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+			V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING;
 	return 0;
 }
 
@@ -744,9 +744,10 @@
 	.vidioc_g_crop = vidioc_g_crop,
 };
 
-static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count,
-			       unsigned int *plane_count, unsigned int psize[],
-			       void *allocators[])
+static int s5p_mfc_queue_setup(struct vb2_queue *vq,
+			const struct v4l2_format *fmt, unsigned int *buf_count,
+			unsigned int *plane_count, unsigned int psize[],
+			void *allocators[])
 {
 	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
 
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index 4c90e53..1e8cdb7 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -785,8 +785,8 @@
 	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
 	cap->version = KERNEL_VERSION(1, 0, 0);
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
-			  | V4L2_CAP_VIDEO_OUTPUT
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE
+			  | V4L2_CAP_VIDEO_OUTPUT_MPLANE
 			  | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1513,8 +1513,9 @@
 }
 
 static int s5p_mfc_queue_setup(struct vb2_queue *vq,
-		       unsigned int *buf_count, unsigned int *plane_count,
-		       unsigned int psize[], void *allocators[])
+			const struct v4l2_format *fmt,
+			unsigned int *buf_count, unsigned int *plane_count,
+			unsigned int psize[], void *allocators[])
 {
 	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
 
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
index 4917e2c..e16d3a4 100644
--- a/drivers/media/video/s5p-tv/mixer_video.c
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -727,8 +727,8 @@
 	.unlocked_ioctl = video_ioctl2,
 };
 
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-	unsigned int *nplanes, unsigned int sizes[],
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt,
+	unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[],
 	void *alloc_ctxs[])
 {
 	struct mxr_layer *layer = vb2_get_drv_priv(vq);
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index bc8d6bb..9b55068 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -843,10 +843,10 @@
 int saa7134_ir_start(struct saa7134_dev *dev);
 void saa7134_ir_stop(struct saa7134_dev *dev);
 #else
-#define saa7134_input_init1(dev)	(0)
-#define saa7134_input_fini(dev)		(0)
-#define saa7134_input_irq(dev)		(0)
-#define saa7134_probe_i2c_ir(dev)	(0)
-#define saa7134_ir_start(dev)		(0)
-#define saa7134_ir_stop(dev)		(0)
+#define saa7134_input_init1(dev)	((void)0)
+#define saa7134_input_fini(dev)		((void)0)
+#define saa7134_input_irq(dev)		((void)0)
+#define saa7134_probe_i2c_ir(dev)	((void)0)
+#define saa7134_ir_start(dev)		((void)0)
+#define saa7134_ir_stop(dev)		((void)0)
 #endif
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 8615fb8..f390682 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -90,7 +90,6 @@
 struct sh_mobile_ceu_buffer {
 	struct vb2_buffer vb; /* v4l buffer must be first */
 	struct list_head queue;
-	enum v4l2_mbus_pixelcode code;
 };
 
 struct sh_mobile_ceu_dev {
@@ -100,7 +99,8 @@
 
 	unsigned int irq;
 	void __iomem *base;
-	unsigned long video_limit;
+	size_t video_limit;
+	size_t buf_total;
 
 	spinlock_t lock;		/* Protects video buffer lists */
 	struct list_head capture;
@@ -121,7 +121,7 @@
 };
 
 struct sh_mobile_ceu_cam {
-	/* CEU offsets within scaled by the CEU camera output */
+	/* CEU offsets within the camera output, before the CEU scaler */
 	unsigned int ceu_left;
 	unsigned int ceu_top;
 	/* Client output, as seen by the CEU */
@@ -144,30 +144,6 @@
 	return container_of(vb, struct sh_mobile_ceu_buffer, vb);
 }
 
-static unsigned long make_bus_param(struct sh_mobile_ceu_dev *pcdev)
-{
-	unsigned long flags;
-
-	flags = SOCAM_MASTER |
-		SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (pcdev->pdata->flags & SH_CEU_FLAG_USE_8BIT_BUS)
-		flags |= SOCAM_DATAWIDTH_8;
-
-	if (pcdev->pdata->flags & SH_CEU_FLAG_USE_16BIT_BUS)
-		flags |= SOCAM_DATAWIDTH_16;
-
-	if (flags & SOCAM_DATAWIDTH_MASK)
-		return flags;
-
-	return 0;
-}
-
 static void ceu_write(struct sh_mobile_ceu_dev *priv,
 		      unsigned long reg_offs, u32 data)
 {
@@ -216,33 +192,61 @@
 /*
  *  Videobuf operations
  */
+
+/*
+ * .queue_setup() is called to check, whether the driver can accept the
+ *		  requested number of buffers and to fill in plane sizes
+ *		  for the current frame format if required
+ */
 static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
+			const struct v4l2_format *fmt,
 			unsigned int *count, unsigned int *num_planes,
 			unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
-						icd->current_fmt->host_fmt);
+	int bytes_per_line;
+	unsigned int height;
 
+	if (fmt) {
+		const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
+								fmt->fmt.pix.pixelformat);
+		if (!xlate)
+			return -EINVAL;
+		bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
+							 xlate->host_fmt);
+		height = fmt->fmt.pix.height;
+	} else {
+		/* Called from VIDIOC_REQBUFS or in compatibility mode */
+		bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+		height = icd->user_height;
+	}
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	*num_planes = 1;
+	sizes[0] = bytes_per_line * height;
 
-	pcdev->sequence = 0;
-	sizes[0] = bytes_per_line * icd->user_height;
 	alloc_ctxs[0] = pcdev->alloc_ctx;
 
+	if (!vq->num_buffers)
+		pcdev->sequence = 0;
+
 	if (!*count)
 		*count = 2;
 
-	if (pcdev->video_limit) {
-		if (PAGE_ALIGN(sizes[0]) * *count > pcdev->video_limit)
-			*count = pcdev->video_limit / PAGE_ALIGN(sizes[0]);
+	/* If *num_planes != 0, we have already verified *count. */
+	if (pcdev->video_limit && !*num_planes) {
+		size_t size = PAGE_ALIGN(sizes[0]) * *count;
+
+		if (size + pcdev->buf_total > pcdev->video_limit)
+			*count = (pcdev->video_limit - pcdev->buf_total) /
+				PAGE_ALIGN(sizes[0]);
 	}
 
+	*num_planes = 1;
+
 	dev_dbg(icd->parent, "count=%d, size=%u\n", *count, sizes[0]);
 
 	return 0;
@@ -267,6 +271,7 @@
 	unsigned long top1, top2;
 	unsigned long bottom1, bottom2;
 	u32 status;
+	bool planar;
 	int ret = 0;
 
 	/*
@@ -314,17 +319,29 @@
 
 	phys_addr_top = vb2_dma_contig_plane_dma_addr(pcdev->active, 0);
 
-	ceu_write(pcdev, top1, phys_addr_top);
-	if (V4L2_FIELD_NONE != pcdev->field) {
-		phys_addr_bottom = phys_addr_top + icd->user_width;
-		ceu_write(pcdev, bottom1, phys_addr_bottom);
-	}
-
 	switch (icd->current_fmt->host_fmt->fourcc) {
 	case V4L2_PIX_FMT_NV12:
 	case V4L2_PIX_FMT_NV21:
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
+		planar = true;
+		break;
+	default:
+		planar = false;
+	}
+
+	ceu_write(pcdev, top1, phys_addr_top);
+	if (V4L2_FIELD_NONE != pcdev->field) {
+		if (planar)
+			phys_addr_bottom = phys_addr_top + icd->user_width;
+		else
+			phys_addr_bottom = phys_addr_top +
+				soc_mbus_bytes_per_line(icd->user_width,
+							icd->current_fmt->host_fmt);
+		ceu_write(pcdev, bottom1, phys_addr_bottom);
+	}
+
+	if (planar) {
 		phys_addr_top += icd->user_width *
 			icd->user_height;
 		ceu_write(pcdev, top2, phys_addr_top);
@@ -341,44 +358,11 @@
 
 static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 {
-	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
-	struct sh_mobile_ceu_buffer *buf;
-	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
-						icd->current_fmt->host_fmt);
-	unsigned long size;
-
-	if (bytes_per_line < 0)
-		return bytes_per_line;
-
-	buf = to_ceu_vb(vb);
-
-	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
-		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
+	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
 
 	/* Added list head initialization on alloc */
 	WARN(!list_empty(&buf->queue), "Buffer %p on queue!\n", vb);
 
-#ifdef DEBUG
-	/*
-	 * This can be useful if you want to see if we actually fill
-	 * the buffer with something
-	 */
-	if (vb2_plane_vaddr(vb, 0))
-		memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
-#endif
-
-	BUG_ON(NULL == icd->current_fmt);
-
-	size = icd->user_height * bytes_per_line;
-
-	if (vb2_plane_size(vb, 0) < size) {
-		dev_err(icd->parent, "Buffer too small (%lu < %lu)\n",
-			vb2_plane_size(vb, 0), size);
-		return -ENOBUFS;
-	}
-
-	vb2_set_plane_payload(vb, 0, size);
-
 	return 0;
 }
 
@@ -388,10 +372,35 @@
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
+	unsigned long size;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+
+	if (bytes_per_line < 0)
+		goto error;
+
+	size = icd->user_height * bytes_per_line;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		dev_err(icd->parent, "Buffer #%d too small (%lu < %lu)\n",
+			vb->v4l2_buf.index, vb2_plane_size(vb, 0), size);
+		goto error;
+	}
+
+	vb2_set_plane_payload(vb, 0, size);
 
 	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
 		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
 
+#ifdef DEBUG
+	/*
+	 * This can be useful if you want to see if we actually fill
+	 * the buffer with something
+	 */
+	if (vb2_plane_vaddr(vb, 0))
+		memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
+#endif
+
 	spin_lock_irq(&pcdev->lock);
 	list_add_tail(&buf->queue, &pcdev->capture);
 
@@ -405,6 +414,11 @@
 		sh_mobile_ceu_capture(pcdev);
 	}
 	spin_unlock_irq(&pcdev->lock);
+
+	return;
+
+error:
+	vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
 }
 
 static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
@@ -429,11 +443,23 @@
 	if (buf->queue.next)
 		list_del_init(&buf->queue);
 
+	pcdev->buf_total -= PAGE_ALIGN(vb2_plane_size(vb, 0));
+	dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
+		pcdev->buf_total);
+
 	spin_unlock_irq(&pcdev->lock);
 }
 
 static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
 {
+	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+
+	pcdev->buf_total += PAGE_ALIGN(vb2_plane_size(vb, 0));
+	dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
+		pcdev->buf_total);
+
 	/* This is for locking debugging only */
 	INIT_LIST_HEAD(&to_ceu_vb(vb)->queue);
 	return 0;
@@ -535,19 +561,29 @@
 
 	pm_runtime_get_sync(ici->v4l2_dev.dev);
 
+	pcdev->buf_total = 0;
+
 	ret = sh_mobile_ceu_soft_reset(pcdev);
 
 	csi2_sd = find_csi2(pcdev);
+	if (csi2_sd)
+		csi2_sd->grp_id = (long)icd;
 
 	ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
-	if (ret != -ENODEV && ret != -ENOIOCTLCMD && ret < 0) {
+	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
 		pm_runtime_put_sync(ici->v4l2_dev.dev);
-	} else {
-		pcdev->icd = icd;
-		ret = 0;
+		return ret;
 	}
 
-	return ret;
+	/*
+	 * -ENODEV is special: either csi2_sd == NULL or the CSI-2 driver
+	 * has not found this soc-camera device among its clients
+	 */
+	if (ret == -ENODEV && csi2_sd)
+		csi2_sd->grp_id = 0;
+	pcdev->icd = icd;
+
+	return 0;
 }
 
 /* Called with .video_lock held */
@@ -560,6 +596,8 @@
 	BUG_ON(icd != pcdev->icd);
 
 	v4l2_subdev_call(csi2_sd, core, s_power, 0);
+	if (csi2_sd)
+		csi2_sd->grp_id = 0;
 	/* disable capture, disable interrupts */
 	ceu_write(pcdev, CEIER, 0);
 	sh_mobile_ceu_soft_reset(pcdev);
@@ -628,22 +666,22 @@
 	left_offset	= cam->ceu_left;
 	top_offset	= cam->ceu_top;
 
-	/* CEU cropping (CFSZR) is applied _after_ the scaling filter (CFLCR) */
+	WARN_ON(icd->user_width & 3 || icd->user_height & 3);
+
+	width = icd->user_width;
+
 	if (pcdev->image_mode) {
 		in_width = cam->width;
 		if (!pcdev->is_16bit) {
 			in_width *= 2;
 			left_offset *= 2;
 		}
-		width = icd->user_width;
-		cdwdr_width = icd->user_width;
+		cdwdr_width = width;
 	} else {
-		int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+		int bytes_per_line = soc_mbus_bytes_per_line(width,
 						icd->current_fmt->host_fmt);
 		unsigned int w_factor;
 
-		width = icd->user_width;
-
 		switch (icd->current_fmt->host_fmt->packing) {
 		case SOC_MBUS_PACKING_2X8_PADHI:
 			w_factor = 2;
@@ -653,10 +691,10 @@
 		}
 
 		in_width = cam->width * w_factor;
-		left_offset = left_offset * w_factor;
+		left_offset *= w_factor;
 
 		if (bytes_per_line < 0)
-			cdwdr_width = icd->user_width;
+			cdwdr_width = width;
 		else
 			cdwdr_width = bytes_per_line;
 	}
@@ -664,7 +702,7 @@
 	height = icd->user_height;
 	in_height = cam->height;
 	if (V4L2_FIELD_NONE != pcdev->field) {
-		height /= 2;
+		height = (height / 2) & ~3;
 		in_height /= 2;
 		top_offset /= 2;
 		cdwdr_width *= 2;
@@ -686,6 +724,7 @@
 
 	ceu_write(pcdev, CAMOR, camor);
 	ceu_write(pcdev, CAPWR, (in_height << 16) | in_width);
+	/* CFSZR clipping is applied _after_ the scaling filter (CFLCR) */
 	ceu_write(pcdev, CFSZR, (height << 16) | width);
 	ceu_write(pcdev, CDWDR, cdwdr_width);
 }
@@ -723,66 +762,93 @@
 		ceu_write(pcdev, CAPSR, capsr);
 }
 
+/* Find the bus subdevice driver, e.g., CSI2 */
+static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev,
+					   struct soc_camera_device *icd)
+{
+	if (pcdev->csi2_pdev) {
+		struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
+		if (csi2_sd && csi2_sd->grp_id == (u32)icd)
+			return csi2_sd;
+	}
+
+	return soc_camera_to_subdev(icd);
+}
+
+#define CEU_BUS_FLAGS (V4L2_MBUS_MASTER |	\
+		V4L2_MBUS_PCLK_SAMPLE_RISING |	\
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH |	\
+		V4L2_MBUS_HSYNC_ACTIVE_LOW |	\
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH |	\
+		V4L2_MBUS_VSYNC_ACTIVE_LOW |	\
+		V4L2_MBUS_DATA_ACTIVE_HIGH)
+
 /* Capture is not running, no interrupts, no locking needed */
 static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 				       __u32 pixfmt)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int ret;
-	unsigned long camera_flags, common_flags, value;
-	int yuv_lineskip;
+	struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	unsigned long value, common_flags = CEU_BUS_FLAGS;
 	u32 capsr = capture_save_reset(pcdev);
+	unsigned int yuv_lineskip;
+	int ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-	common_flags = soc_camera_bus_param_compatible(camera_flags,
-						       make_bus_param(pcdev));
-	if (!common_flags)
-		return -EINVAL;
+	/*
+	 * If the client doesn't implement g_mbus_config, we just use our
+	 * platform data
+	 */
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret) {
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  common_flags);
+		if (!common_flags)
+			return -EINVAL;
+	} else if (ret != -ENOIOCTLCMD) {
+		return ret;
+	}
 
 	/* Make choises, based on platform preferences */
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
 		if (pcdev->pdata->flags & SH_CEU_FLAG_HSYNC_LOW)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
 	}
 
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
 		if (pcdev->pdata->flags & SH_CEU_FLAG_VSYNC_LOW)
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
 		else
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+			common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
 	}
 
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
+	cfg.flags = common_flags;
+	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
 		return ret;
 
-	switch (common_flags & SOCAM_DATAWIDTH_MASK) {
-	case SOCAM_DATAWIDTH_8:
-		pcdev->is_16bit = 0;
-		break;
-	case SOCAM_DATAWIDTH_16:
+	if (icd->current_fmt->host_fmt->bits_per_sample > 8)
 		pcdev->is_16bit = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
+	else
+		pcdev->is_16bit = 0;
 
 	ceu_write(pcdev, CRCNTR, 0);
 	ceu_write(pcdev, CRCMPR, 0);
 
 	value = 0x00000010; /* data fetch by default */
-	yuv_lineskip = 0;
+	yuv_lineskip = 0x10;
 
 	switch (icd->current_fmt->host_fmt->fourcc) {
 	case V4L2_PIX_FMT_NV12:
 	case V4L2_PIX_FMT_NV21:
-		yuv_lineskip = 1; /* skip for NV12/21, no skip for NV16/61 */
+		/* convert 4:2:2 -> 4:2:0 */
+		yuv_lineskip = 0; /* skip for NV12/21, no skip for NV16/61 */
 		/* fall-through */
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
@@ -808,8 +874,8 @@
 	    icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV61)
 		value ^= 0x00000100; /* swap U, V to change from NV1x->NVx1 */
 
-	value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
-	value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
+	value |= common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
+	value |= common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
 	value |= pcdev->is_16bit ? 1 << 12 : 0;
 
 	/* CSI2 mode */
@@ -852,9 +918,7 @@
 	 * using 7 we swap the data bytes to match the incoming order:
 	 * D0, D1, D2, D3, D4, D5, D6, D7
 	 */
-	value = 0x00000017;
-	if (yuv_lineskip)
-		value &= ~0x00000010; /* convert 4:2:2 -> 4:2:0 */
+	value = 0x00000007 | yuv_lineskip;
 
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
@@ -875,13 +939,19 @@
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	unsigned long camera_flags, common_flags;
+	struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
+	unsigned long common_flags = CEU_BUS_FLAGS;
+	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+	int ret;
 
-	camera_flags = icd->ops->query_bus_param(icd);
-	common_flags = soc_camera_bus_param_compatible(camera_flags,
-						       make_bus_param(pcdev));
-	if (!common_flags || buswidth > 16 ||
-	    (buswidth > 8 && !(common_flags & SOCAM_DATAWIDTH_16)))
+	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+	if (!ret)
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  common_flags);
+	else if (ret != -ENOIOCTLCMD)
+		return ret;
+
+	if (!common_flags || buswidth > 16)
 		return -EINVAL;
 
 	return 0;
@@ -891,26 +961,26 @@
 	{
 		.fourcc			= V4L2_PIX_FMT_NV12,
 		.name			= "NV12",
-		.bits_per_sample	= 12,
-		.packing		= SOC_MBUS_PACKING_NONE,
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_1_5X8,
 		.order			= SOC_MBUS_ORDER_LE,
 	}, {
 		.fourcc			= V4L2_PIX_FMT_NV21,
 		.name			= "NV21",
-		.bits_per_sample	= 12,
-		.packing		= SOC_MBUS_PACKING_NONE,
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_1_5X8,
 		.order			= SOC_MBUS_ORDER_LE,
 	}, {
 		.fourcc			= V4L2_PIX_FMT_NV16,
 		.name			= "NV16",
-		.bits_per_sample	= 16,
-		.packing		= SOC_MBUS_PACKING_NONE,
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 		.order			= SOC_MBUS_ORDER_LE,
 	}, {
 		.fourcc			= V4L2_PIX_FMT_NV61,
 		.name			= "NV61",
-		.bits_per_sample	= 16,
-		.packing		= SOC_MBUS_PACKING_NONE,
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
 		.order			= SOC_MBUS_ORDER_LE,
 	},
 };
@@ -920,6 +990,8 @@
 {
 	return	fmt->packing == SOC_MBUS_PACKING_NONE ||
 		(fmt->bits_per_sample == 8 &&
+		 fmt->packing == SOC_MBUS_PACKING_1_5X8) ||
+		(fmt->bits_per_sample == 8 &&
 		 fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
 		(fmt->bits_per_sample > 8 &&
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
@@ -927,6 +999,38 @@
 
 static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
 
+static struct soc_camera_device *ctrl_to_icd(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct soc_camera_device,
+							ctrl_handler);
+}
+
+static int sh_mobile_ceu_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct soc_camera_device *icd = ctrl_to_icd(ctrl);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+
+	switch (ctrl->id) {
+	case V4L2_CID_SHARPNESS:
+		switch (icd->current_fmt->host_fmt->fourcc) {
+		case V4L2_PIX_FMT_NV12:
+		case V4L2_PIX_FMT_NV21:
+		case V4L2_PIX_FMT_NV16:
+		case V4L2_PIX_FMT_NV61:
+			ceu_write(pcdev, CLFCR, !ctrl->val);
+			return 0;
+		}
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops sh_mobile_ceu_ctrl_ops = {
+	.s_ctrl = sh_mobile_ceu_s_ctrl,
+};
+
 static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				     struct soc_camera_format_xlate *xlate)
 {
@@ -952,6 +1056,7 @@
 	}
 
 	if (!pcdev->pdata->csi2) {
+		/* Are there any restrictions in the CSI-2 case? */
 		ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
 		if (ret < 0)
 			return 0;
@@ -962,6 +1067,12 @@
 		struct v4l2_rect rect;
 		int shift = 0;
 
+		/* Add our control */
+		v4l2_ctrl_new_std(&icd->ctrl_handler, &sh_mobile_ceu_ctrl_ops,
+				  V4L2_CID_SHARPNESS, 0, 1, 1, 0);
+		if (icd->ctrl_handler.error)
+			return icd->ctrl_handler.error;
+
 		/* FIXME: subwindow is lost between close / open */
 
 		/* Cache current client geometry */
@@ -1004,9 +1115,6 @@
 		cam->width	= mf.width;
 		cam->height	= mf.height;
 
-		cam->width	= mf.width;
-		cam->height	= mf.height;
-
 		icd->host_priv = cam;
 	} else {
 		cam = icd->host_priv;
@@ -1278,6 +1386,7 @@
 	unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
 	unsigned int max_width, max_height;
 	struct v4l2_cropcap cap;
+	bool ceu_1to1;
 	int ret;
 
 	ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
@@ -1287,7 +1396,14 @@
 
 	dev_geo(dev, "camera scaled to %ux%u\n", mf->width, mf->height);
 
-	if ((width == mf->width && height == mf->height) || !ceu_can_scale)
+	if (width == mf->width && height == mf->height) {
+		/* Perfect! The client has done it all. */
+		ceu_1to1 = true;
+		goto update_cache;
+	}
+
+	ceu_1to1 = false;
+	if (!ceu_can_scale)
 		goto update_cache;
 
 	cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -1327,7 +1443,10 @@
 	if (ret < 0)
 		return ret;
 
-	update_subrect(cam);
+	if (ceu_1to1)
+		cam->subrect = cam->rect;
+	else
+		update_subrect(cam);
 
 	return 0;
 }
@@ -1414,7 +1533,10 @@
 	capsr = capture_save_reset(pcdev);
 	dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
 
-	/* 1. - 2. Apply iterative camera S_CROP for new input window. */
+	/*
+	 * 1. - 2. Apply iterative camera S_CROP for new input window, read back
+	 * actual camera rectangle.
+	 */
 	ret = client_s_crop(icd, a, &cam_crop);
 	if (ret < 0)
 		return ret;
@@ -1498,8 +1620,9 @@
 		ceu_write(pcdev, CFLCR, cflcr);
 	}
 
-	icd->user_width	 = out_width;
-	icd->user_height = out_height;
+	icd->user_width	 = out_width & ~3;
+	icd->user_height = out_height & ~3;
+	/* Offsets are applied at the CEU scaling filter input */
 	cam->ceu_left	 = scale_down(rect->left - cam_rect->left, scale_cam_h) & ~1;
 	cam->ceu_top	 = scale_down(rect->top - cam_rect->top, scale_cam_v) & ~1;
 
@@ -1538,7 +1661,7 @@
  * CEU crop, mapped backed onto the client input (subrect).
  */
 static void calculate_client_output(struct soc_camera_device *icd,
-		struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
+		const struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct device *dev = icd->parent;
@@ -1574,8 +1697,8 @@
 	dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
 
 	/*
-	 * 4. Calculate client output window by applying combined scales to real
-	 *    input window.
+	 * 4. Calculate desired client output window by applying combined scales
+	 *    to client (real) input window.
 	 */
 	mf->width	= scale_down(cam->rect.width, scale_h);
 	mf->height	= scale_down(cam->rect.height, scale_v);
@@ -1600,8 +1723,6 @@
 	bool image_mode;
 	enum v4l2_field field;
 
-	dev_geo(dev, "S_FMT(pix=0x%x, %ux%u)\n", pixfmt, pix->width, pix->height);
-
 	switch (pix->field) {
 	default:
 		pix->field = V4L2_FIELD_NONE;
@@ -1622,8 +1743,8 @@
 		return -EINVAL;
 	}
 
-	/* 1.-4. Calculate client output geometry */
-	calculate_client_output(icd, &f->fmt.pix, &mf);
+	/* 1.-4. Calculate desired client output geometry */
+	calculate_client_output(icd, pix, &mf);
 	mf.field	= pix->field;
 	mf.colorspace	= pix->colorspace;
 	mf.code		= xlate->code;
@@ -1639,6 +1760,9 @@
 		image_mode = false;
 	}
 
+	dev_geo(dev, "S_FMT(pix=0x%x, fld 0x%x, code 0x%x, %ux%u)\n", pixfmt, mf.field, mf.code,
+		pix->width, pix->height);
+
 	dev_geo(dev, "4: request camera output %ux%u\n", mf.width, mf.height);
 
 	/* 5. - 9. */
@@ -1700,6 +1824,10 @@
 	pcdev->field = field;
 	pcdev->image_mode = image_mode;
 
+	/* CFSZR requirement */
+	pix->width	&= ~3;
+	pix->height	&= ~3;
+
 	return 0;
 }
 
@@ -1725,7 +1853,8 @@
 
 	/* FIXME: calculate using depth and bus width */
 
-	v4l_bound_align_image(&pix->width, 2, 2560, 1,
+	/* CFSZR requires height and width to be 4-pixel aligned */
+	v4l_bound_align_image(&pix->width, 2, 2560, 2,
 			      &pix->height, 4, 1920, 2, 0);
 
 	width = pix->width;
@@ -1778,6 +1907,9 @@
 			pix->height = height;
 	}
 
+	pix->width	&= ~3;
+	pix->height	&= ~3;
+
 	dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
 		__func__, ret, pix->pixelformat, pix->width, pix->height);
 
@@ -1824,8 +1956,8 @@
 			     out_height != f.fmt.pix.height))
 			ret = -EINVAL;
 		if (!ret) {
-			icd->user_width		= out_width;
-			icd->user_height	= out_height;
+			icd->user_width		= out_width & ~3;
+			icd->user_height	= out_height & ~3;
 			ret = sh_mobile_ceu_set_bus_param(icd,
 					icd->current_fmt->host_fmt->fourcc);
 		}
@@ -1869,55 +2001,6 @@
 	return vb2_queue_init(q);
 }
 
-static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
-				  struct v4l2_control *ctrl)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	u32 val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_SHARPNESS:
-		val = ceu_read(pcdev, CLFCR);
-		ctrl->value = val ^ 1;
-		return 0;
-	}
-	return -ENOIOCTLCMD;
-}
-
-static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd,
-				  struct v4l2_control *ctrl)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-
-	switch (ctrl->id) {
-	case V4L2_CID_SHARPNESS:
-		switch (icd->current_fmt->host_fmt->fourcc) {
-		case V4L2_PIX_FMT_NV12:
-		case V4L2_PIX_FMT_NV21:
-		case V4L2_PIX_FMT_NV16:
-		case V4L2_PIX_FMT_NV61:
-			ceu_write(pcdev, CLFCR, !ctrl->value);
-			return 0;
-		}
-		return -EINVAL;
-	}
-	return -ENOIOCTLCMD;
-}
-
-static const struct v4l2_queryctrl sh_mobile_ceu_controls[] = {
-	{
-		.id		= V4L2_CID_SHARPNESS,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Low-pass filter",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= sh_mobile_ceu_add_device,
@@ -1929,14 +2012,10 @@
 	.set_livecrop	= sh_mobile_ceu_set_livecrop,
 	.set_fmt	= sh_mobile_ceu_set_fmt,
 	.try_fmt	= sh_mobile_ceu_try_fmt,
-	.set_ctrl	= sh_mobile_ceu_set_ctrl,
-	.get_ctrl	= sh_mobile_ceu_get_ctrl,
 	.poll		= sh_mobile_ceu_poll,
 	.querycap	= sh_mobile_ceu_querycap,
 	.set_bus_param	= sh_mobile_ceu_set_bus_param,
 	.init_videobuf2	= sh_mobile_ceu_init_videobuf,
-	.controls	= sh_mobile_ceu_controls,
-	.num_controls	= ARRAY_SIZE(sh_mobile_ceu_controls),
 };
 
 struct bus_wait {
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index 2893a01..ea4f047 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -15,10 +15,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/sh_mobile_ceu.h>
 #include <media/sh_mobile_csi2.h>
 #include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-device.h>
@@ -35,11 +37,10 @@
 	struct v4l2_subdev		subdev;
 	struct list_head		list;
 	unsigned int			irq;
+	unsigned long			mipi_flags;
 	void __iomem			*base;
 	struct platform_device		*pdev;
 	struct sh_csi2_client_config	*client;
-	unsigned long (*query_bus_param)(struct soc_camera_device *);
-	int (*set_bus_param)(struct soc_camera_device *, unsigned long);
 };
 
 static int sh_csi2_try_fmt(struct v4l2_subdev *sd,
@@ -127,9 +128,34 @@
 	return 0;
 }
 
+static int sh_csi2_g_mbus_config(struct v4l2_subdev *sd,
+				 struct v4l2_mbus_config *cfg)
+{
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+
+	return 0;
+}
+
+static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd,
+				 const struct v4l2_mbus_config *cfg)
+{
+	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+	struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+	struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
+	struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,
+					      .flags = priv->mipi_flags};
+
+	return v4l2_subdev_call(client_sd, video, s_mbus_config, &client_cfg);
+}
+
 static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
 	.s_mbus_fmt	= sh_csi2_s_fmt,
 	.try_mbus_fmt	= sh_csi2_try_fmt,
+	.g_mbus_config	= sh_csi2_g_mbus_config,
+	.s_mbus_config	= sh_csi2_s_mbus_config,
 };
 
 static void sh_csi2_hwinit(struct sh_csi2 *priv)
@@ -144,11 +170,21 @@
 	udelay(5);
 	iowrite32(0x00000000, priv->base + SH_CSI2_SRST);
 
-	if (priv->client->lanes & 3)
-		tmp |= priv->client->lanes & 3;
-	else
-		/* Default - both lanes */
-		tmp |= 3;
+	switch (pdata->type) {
+	case SH_CSI2C:
+		if (priv->client->lanes == 1)
+			tmp |= 1;
+		else
+			/* Default - both lanes */
+			tmp |= 3;
+		break;
+	case SH_CSI2I:
+		if (!priv->client->lanes || priv->client->lanes > 4)
+			/* Default - all 4 lanes */
+			tmp |= 0xf;
+		else
+			tmp |= (1 << priv->client->lanes) - 1;
+	}
 
 	if (priv->client->phy == SH_CSI2_PHY_MAIN)
 		tmp |= 0x8000;
@@ -163,38 +199,18 @@
 	iowrite32(tmp, priv->base + SH_CSI2_CHKSUM);
 }
 
-static int sh_csi2_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	return 0;
-}
-
-static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	const unsigned long flags = SOCAM_PCLK_SAMPLE_RISING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
-		SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_DATA_ACTIVE_HIGH;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int sh_csi2_client_connect(struct sh_csi2 *priv)
 {
 	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
-	struct v4l2_subdev *sd, *csi2_sd = &priv->subdev;
-	struct soc_camera_device *icd = NULL;
+	struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
+	struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
 	struct device *dev = v4l2_get_subdevdata(&priv->subdev);
-	int i;
+	struct v4l2_mbus_config cfg;
+	unsigned long common_flags, csi2_flags;
+	int i, ret;
 
-	v4l2_device_for_each_subdev(sd, csi2_sd->v4l2_dev)
-		if (sd->grp_id) {
-			icd = (struct soc_camera_device *)sd->grp_id;
-			break;
-		}
-
-	if (!icd)
-		return -EINVAL;
+	if (priv->client)
+		return -EBUSY;
 
 	for (i = 0; i < pdata->num_clients; i++)
 		if (&pdata->clients[i].pdev->dev == icd->pdev)
@@ -205,15 +221,42 @@
 	if (i == pdata->num_clients)
 		return -ENODEV;
 
+	/* Check if we can support this camera */
+	csi2_flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK | V4L2_MBUS_CSI2_1_LANE;
+
+	switch (pdata->type) {
+	case SH_CSI2C:
+		if (pdata->clients[i].lanes != 1)
+			csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
+		break;
+	case SH_CSI2I:
+		switch (pdata->clients[i].lanes) {
+		default:
+			csi2_flags |= V4L2_MBUS_CSI2_4_LANE;
+		case 3:
+			csi2_flags |= V4L2_MBUS_CSI2_3_LANE;
+		case 2:
+			csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
+		}
+	}
+
+	cfg.type = V4L2_MBUS_CSI2;
+	ret = v4l2_subdev_call(client_sd, video, g_mbus_config, &cfg);
+	if (ret == -ENOIOCTLCMD)
+		common_flags = csi2_flags;
+	else if (!ret)
+		common_flags = soc_mbus_config_compatible(&cfg,
+							  csi2_flags);
+	else
+		common_flags = 0;
+
+	if (!common_flags)
+		return -EINVAL;
+
+	/* All good: camera MIPI configuration supported */
+	priv->mipi_flags = common_flags;
 	priv->client = pdata->clients + i;
 
-	priv->set_bus_param		= icd->ops->set_bus_param;
-	priv->query_bus_param		= icd->ops->query_bus_param;
-	icd->ops->set_bus_param		= sh_csi2_set_bus_param;
-	icd->ops->query_bus_param	= sh_csi2_query_bus_param;
-
-	csi2_sd->grp_id = (long)icd;
-
 	pm_runtime_get_sync(dev);
 
 	sh_csi2_hwinit(priv);
@@ -223,16 +266,10 @@
 
 static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
 {
-	struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
+	if (!priv->client)
+		return;
 
 	priv->client = NULL;
-	priv->subdev.grp_id = 0;
-
-	/* Driver is about to be unbound */
-	icd->ops->set_bus_param		= priv->set_bus_param;
-	icd->ops->query_bus_param	= priv->query_bus_param;
-	priv->set_bus_param		= NULL;
-	priv->query_bus_param		= NULL;
 
 	pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
 }
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 6a72987..9644bd8 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -20,6 +20,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/sh_vou.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 5bdfe7e..b72580c 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -50,49 +50,65 @@
 static LIST_HEAD(devices);
 static DEFINE_MUTEX(list_lock);		/* Protects the list of hosts */
 
-static int soc_camera_power_set(struct soc_camera_device *icd,
-				struct soc_camera_link *icl,
-				int power_on)
+static int soc_camera_power_on(struct soc_camera_device *icd,
+			       struct soc_camera_link *icl)
 {
-	int ret;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	int ret = regulator_bulk_enable(icl->num_regulators,
+					icl->regulators);
+	if (ret < 0) {
+		dev_err(icd->pdev, "Cannot enable regulators\n");
+		return ret;
+	}
 
-	if (power_on) {
-		ret = regulator_bulk_enable(icl->num_regulators,
-					    icl->regulators);
-		if (ret < 0) {
-			dev_err(icd->pdev, "Cannot enable regulators\n");
-			return ret;
-		}
-
-		if (icl->power)
-			ret = icl->power(icd->pdev, power_on);
+	if (icl->power) {
+		ret = icl->power(icd->pdev, 1);
 		if (ret < 0) {
 			dev_err(icd->pdev,
 				"Platform failed to power-on the camera.\n");
-
-			regulator_bulk_disable(icl->num_regulators,
-					       icl->regulators);
-			return ret;
+			goto elinkpwr;
 		}
-	} else {
-		ret = 0;
-		if (icl->power)
-			ret = icl->power(icd->pdev, 0);
+	}
+
+	ret = v4l2_subdev_call(sd, core, s_power, 1);
+	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+		goto esdpwr;
+
+	return 0;
+
+esdpwr:
+	if (icl->power)
+		icl->power(icd->pdev, 0);
+elinkpwr:
+	regulator_bulk_disable(icl->num_regulators,
+			       icl->regulators);
+	return ret;
+}
+
+static int soc_camera_power_off(struct soc_camera_device *icd,
+				struct soc_camera_link *icl)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	int ret = v4l2_subdev_call(sd, core, s_power, 0);
+
+	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+		return ret;
+
+	if (icl->power) {
+		ret = icl->power(icd->pdev, 0);
 		if (ret < 0) {
 			dev_err(icd->pdev,
 				"Platform failed to power-off the camera.\n");
 			return ret;
 		}
-
-		ret = regulator_bulk_disable(icl->num_regulators,
-					     icl->regulators);
-		if (ret < 0) {
-			dev_err(icd->pdev, "Cannot disable regulators\n");
-			return ret;
-		}
 	}
 
-	return 0;
+	ret = regulator_bulk_disable(icl->num_regulators,
+				     icl->regulators);
+	if (ret < 0)
+		dev_err(icd->pdev, "Cannot disable regulators\n");
+
+	return ret;
 }
 
 const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
@@ -108,38 +124,38 @@
 EXPORT_SYMBOL(soc_camera_xlate_by_fourcc);
 
 /**
- * soc_camera_apply_sensor_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
+ * soc_camera_apply_board_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
  * @icl:	camera platform parameters
- * @flags:	flags to be inverted according to platform configuration
+ * @cfg:	media bus configuration
  * @return:	resulting flags
  */
-unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
-					    unsigned long flags)
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+					   const struct v4l2_mbus_config *cfg)
 {
-	unsigned long f;
+	unsigned long f, flags = cfg->flags;
 
 	/* If only one of the two polarities is supported, switch to the opposite */
 	if (icl->flags & SOCAM_SENSOR_INVERT_HSYNC) {
-		f = flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW);
-		if (f == SOCAM_HSYNC_ACTIVE_HIGH || f == SOCAM_HSYNC_ACTIVE_LOW)
-			flags ^= SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW;
+		f = flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW);
+		if (f == V4L2_MBUS_HSYNC_ACTIVE_HIGH || f == V4L2_MBUS_HSYNC_ACTIVE_LOW)
+			flags ^= V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW;
 	}
 
 	if (icl->flags & SOCAM_SENSOR_INVERT_VSYNC) {
-		f = flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW);
-		if (f == SOCAM_VSYNC_ACTIVE_HIGH || f == SOCAM_VSYNC_ACTIVE_LOW)
-			flags ^= SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW;
+		f = flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW);
+		if (f == V4L2_MBUS_VSYNC_ACTIVE_HIGH || f == V4L2_MBUS_VSYNC_ACTIVE_LOW)
+			flags ^= V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW;
 	}
 
 	if (icl->flags & SOCAM_SENSOR_INVERT_PCLK) {
-		f = flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING);
-		if (f == SOCAM_PCLK_SAMPLE_RISING || f == SOCAM_PCLK_SAMPLE_FALLING)
-			flags ^= SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING;
+		f = flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING);
+		if (f == V4L2_MBUS_PCLK_SAMPLE_RISING || f == V4L2_MBUS_PCLK_SAMPLE_FALLING)
+			flags ^= V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
 	}
 
 	return flags;
 }
-EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
+EXPORT_SYMBOL(soc_camera_apply_board_flags);
 
 #define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
 	((x) >> 24) & 0xff
@@ -233,6 +249,14 @@
 	return v4l2_subdev_call(sd, core, s_std, *a);
 }
 
+static int soc_camera_g_std(struct file *file, void *priv, v4l2_std_id *a)
+{
+	struct soc_camera_device *icd = file->private_data;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+
+	return v4l2_subdev_call(sd, core, g_std, a);
+}
+
 static int soc_camera_enum_fsizes(struct file *file, void *fh,
 					 struct v4l2_frmsizeenum *fsize)
 {
@@ -318,6 +342,32 @@
 		return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK);
 }
 
+static int soc_camera_create_bufs(struct file *file, void *priv,
+			    struct v4l2_create_buffers *create)
+{
+	struct soc_camera_device *icd = file->private_data;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+
+	/* videobuf2 only */
+	if (ici->ops->init_videobuf)
+		return -EINVAL;
+	else
+		return vb2_create_bufs(&icd->vb2_vidq, create);
+}
+
+static int soc_camera_prepare_buf(struct file *file, void *priv,
+				  struct v4l2_buffer *b)
+{
+	struct soc_camera_device *icd = file->private_data;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+
+	/* videobuf2 only */
+	if (ici->ops->init_videobuf)
+		return -EINVAL;
+	else
+		return vb2_prepare_buf(&icd->vb2_vidq, b);
+}
+
 /* Always entered with .video_lock held */
 static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
@@ -448,7 +498,7 @@
 	struct soc_camera_host *ici;
 	int ret;
 
-	if (!icd->ops)
+	if (!to_soc_camera_control(icd))
 		/* No device driver attached */
 		return -ENODEV;
 
@@ -476,7 +526,7 @@
 			},
 		};
 
-		ret = soc_camera_power_set(icd, icl, 1);
+		ret = soc_camera_power_on(icd, icl);
 		if (ret < 0)
 			goto epower;
 
@@ -512,6 +562,7 @@
 			if (ret < 0)
 				goto einitvb;
 		}
+		v4l2_ctrl_handler_setup(&icd->ctrl_handler);
 	}
 
 	file->private_data = icd;
@@ -529,7 +580,7 @@
 eresume:
 	ici->ops->remove(icd);
 eiciadd:
-	soc_camera_power_set(icd, icl, 0);
+	soc_camera_power_off(icd, icl);
 epower:
 	icd->use_count--;
 	module_put(ici->ops->owner);
@@ -553,7 +604,7 @@
 		if (ici->ops->init_videobuf2)
 			vb2_queue_release(&icd->vb2_vidq);
 
-		soc_camera_power_set(icd, icl, 0);
+		soc_camera_power_off(icd, icl);
 	}
 
 	if (icd->streamer == file)
@@ -781,75 +832,6 @@
 	return 0;
 }
 
-static int soc_camera_queryctrl(struct file *file, void *priv,
-				struct v4l2_queryctrl *qc)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	int i;
-
-	WARN_ON(priv != file->private_data);
-
-	if (!qc->id)
-		return -EINVAL;
-
-	/* First check host controls */
-	for (i = 0; i < ici->ops->num_controls; i++)
-		if (qc->id == ici->ops->controls[i].id) {
-			memcpy(qc, &(ici->ops->controls[i]),
-				sizeof(*qc));
-			return 0;
-		}
-
-	/* Then device controls */
-	for (i = 0; i < icd->ops->num_controls; i++)
-		if (qc->id == icd->ops->controls[i].id) {
-			memcpy(qc, &(icd->ops->controls[i]),
-				sizeof(*qc));
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-static int soc_camera_g_ctrl(struct file *file, void *priv,
-			     struct v4l2_control *ctrl)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	int ret;
-
-	WARN_ON(priv != file->private_data);
-
-	if (ici->ops->get_ctrl) {
-		ret = ici->ops->get_ctrl(icd, ctrl);
-		if (ret != -ENOIOCTLCMD)
-			return ret;
-	}
-
-	return v4l2_subdev_call(sd, core, g_ctrl, ctrl);
-}
-
-static int soc_camera_s_ctrl(struct file *file, void *priv,
-			     struct v4l2_control *ctrl)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	int ret;
-
-	WARN_ON(priv != file->private_data);
-
-	if (ici->ops->set_ctrl) {
-		ret = ici->ops->set_ctrl(icd, ctrl);
-		if (ret != -ENOIOCTLCMD)
-			return ret;
-	}
-
-	return v4l2_subdev_call(sd, core, s_ctrl, ctrl);
-}
-
 static int soc_camera_cropcap(struct file *file, void *fh,
 			      struct v4l2_cropcap *a)
 {
@@ -1003,7 +985,7 @@
 		goto ei2cga;
 	}
 
-	icl->board_info->platform_data = icd;
+	icl->board_info->platform_data = icl;
 
 	subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
 				icl->board_info, NULL);
@@ -1052,12 +1034,29 @@
 
 	dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev));
 
+	/*
+	 * Currently the subdev with the largest number of controls (13) is
+	 * ov6550. So let's pick 16 as a hint for the control handler. Note
+	 * that this is a hint only: too large and you waste some memory, too
+	 * small and there is a (very) small performance hit when looking up
+	 * controls in the internal hash.
+	 */
+	ret = v4l2_ctrl_handler_init(&icd->ctrl_handler, 16);
+	if (ret < 0)
+		return ret;
+
 	ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
 				 icl->regulators);
 	if (ret < 0)
 		goto ereg;
 
-	ret = soc_camera_power_set(icd, icl, 1);
+	/*
+	 * This will not yet call v4l2_subdev_core_ops::s_power(1), because the
+	 * subdevice has not been initialised yet. We'll have to call it once
+	 * again after initialisation, even though it shouldn't be needed, we
+	 * don't do any IO here.
+	 */
+	ret = soc_camera_power_on(icd, icl);
 	if (ret < 0)
 		goto epower;
 
@@ -1098,6 +1097,7 @@
 		if (!control || !control->driver || !dev_get_drvdata(control) ||
 		    !try_module_get(control->driver->owner)) {
 			icl->del_device(icd);
+			ret = -ENODEV;
 			goto enodrv;
 		}
 	}
@@ -1105,6 +1105,9 @@
 	sd = soc_camera_to_subdev(icd);
 	sd->grp_id = (long)icd;
 
+	if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler))
+		goto ectrl;
+
 	/* At this point client .probe() should have run already */
 	ret = soc_camera_init_user_formats(icd);
 	if (ret < 0)
@@ -1123,6 +1126,10 @@
 	if (ret < 0)
 		goto evidstart;
 
+	ret = v4l2_subdev_call(sd, core, s_power, 1);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
+		goto esdpwr;
+
 	/* Try to improve our guess of a reasonable window format */
 	if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) {
 		icd->user_width		= mf.width;
@@ -1133,16 +1140,19 @@
 
 	ici->ops->remove(icd);
 
-	soc_camera_power_set(icd, icl, 0);
+	soc_camera_power_off(icd, icl);
 
 	mutex_unlock(&icd->video_lock);
 
 	return 0;
 
+esdpwr:
+	video_unregister_device(icd->vdev);
 evidstart:
 	mutex_unlock(&icd->video_lock);
 	soc_camera_free_user_formats(icd);
 eiufmt:
+ectrl:
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
@@ -1152,13 +1162,15 @@
 enodrv:
 eadddev:
 	video_device_release(icd->vdev);
+	icd->vdev = NULL;
 evdc:
 	ici->ops->remove(icd);
 eadd:
-	soc_camera_power_set(icd, icl, 0);
+	soc_camera_power_off(icd, icl);
 epower:
 	regulator_bulk_free(icl->num_regulators, icl->regulators);
 ereg:
+	v4l2_ctrl_handler_free(&icd->ctrl_handler);
 	return ret;
 }
 
@@ -1173,6 +1185,7 @@
 
 	BUG_ON(!icd->parent);
 
+	v4l2_ctrl_handler_free(&icd->ctrl_handler);
 	if (vdev) {
 		video_unregister_device(vdev);
 		icd->vdev = NULL;
@@ -1363,24 +1376,24 @@
 
 static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 	.vidioc_querycap	 = soc_camera_querycap,
+	.vidioc_try_fmt_vid_cap  = soc_camera_try_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap    = soc_camera_g_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap    = soc_camera_s_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
 	.vidioc_enum_input	 = soc_camera_enum_input,
 	.vidioc_g_input		 = soc_camera_g_input,
 	.vidioc_s_input		 = soc_camera_s_input,
 	.vidioc_s_std		 = soc_camera_s_std,
+	.vidioc_g_std		 = soc_camera_g_std,
 	.vidioc_enum_framesizes  = soc_camera_enum_fsizes,
 	.vidioc_reqbufs		 = soc_camera_reqbufs,
-	.vidioc_try_fmt_vid_cap  = soc_camera_try_fmt_vid_cap,
 	.vidioc_querybuf	 = soc_camera_querybuf,
 	.vidioc_qbuf		 = soc_camera_qbuf,
 	.vidioc_dqbuf		 = soc_camera_dqbuf,
+	.vidioc_create_bufs	 = soc_camera_create_bufs,
+	.vidioc_prepare_buf	 = soc_camera_prepare_buf,
 	.vidioc_streamon	 = soc_camera_streamon,
 	.vidioc_streamoff	 = soc_camera_streamoff,
-	.vidioc_queryctrl	 = soc_camera_queryctrl,
-	.vidioc_g_ctrl		 = soc_camera_g_ctrl,
-	.vidioc_s_ctrl		 = soc_camera_s_ctrl,
 	.vidioc_cropcap		 = soc_camera_cropcap,
 	.vidioc_g_crop		 = soc_camera_g_crop,
 	.vidioc_s_crop		 = soc_camera_s_crop,
@@ -1409,6 +1422,7 @@
 	vdev->ioctl_ops		= &soc_camera_ioctl_ops;
 	vdev->release		= video_device_release;
 	vdev->tvnorms		= V4L2_STD_UNKNOWN;
+	vdev->ctrl_handler	= &icd->ctrl_handler;
 	vdev->lock		= &icd->video_lock;
 
 	icd->vdev = vdev;
@@ -1427,11 +1441,6 @@
 	if (!icd->parent)
 		return -ENODEV;
 
-	if (!icd->ops ||
-	    !icd->ops->query_bus_param ||
-	    !icd->ops->set_bus_param)
-		return -EINVAL;
-
 	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret < 0) {
 		dev_err(icd->pdev, "video_register_device failed: %d\n", ret);
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 8069cd6..4402a8a 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -30,32 +30,12 @@
 	return container_of(subdev, struct soc_camera_platform_priv, subdev);
 }
 
-static struct soc_camera_platform_info *get_info(struct soc_camera_device *icd)
-{
-	struct platform_device *pdev =
-		to_platform_device(to_soc_camera_control(icd));
-	return pdev->dev.platform_data;
-}
-
 static int soc_camera_platform_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
 	return p->set_capture(p, enable);
 }
 
-static int soc_camera_platform_set_bus_param(struct soc_camera_device *icd,
-					     unsigned long flags)
-{
-	return 0;
-}
-
-static unsigned long
-soc_camera_platform_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_platform_info *p = get_info(icd);
-	return p->bus_param;
-}
-
 static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd,
 					struct v4l2_mbus_framefmt *mf)
 {
@@ -115,6 +95,17 @@
 	return 0;
 }
 
+static int soc_camera_platform_g_mbus_config(struct v4l2_subdev *sd,
+					     struct v4l2_mbus_config *cfg)
+{
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
+
+	cfg->flags = p->mbus_param;
+	cfg->type = p->mbus_type;
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops platform_subdev_video_ops = {
 	.s_stream	= soc_camera_platform_s_stream,
 	.enum_mbus_fmt	= soc_camera_platform_enum_fmt,
@@ -123,6 +114,7 @@
 	.try_mbus_fmt	= soc_camera_platform_fill_fmt,
 	.g_mbus_fmt	= soc_camera_platform_fill_fmt,
 	.s_mbus_fmt	= soc_camera_platform_fill_fmt,
+	.g_mbus_config	= soc_camera_platform_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops platform_subdev_ops = {
@@ -130,11 +122,6 @@
 	.video	= &platform_subdev_video_ops,
 };
 
-static struct soc_camera_ops soc_camera_platform_ops = {
-	.set_bus_param		= soc_camera_platform_set_bus_param,
-	.query_bus_param	= soc_camera_platform_query_bus_param,
-};
-
 static int soc_camera_platform_probe(struct platform_device *pdev)
 {
 	struct soc_camera_host *ici;
@@ -163,8 +150,6 @@
 	/* Set the control device reference */
 	icd->control = &pdev->dev;
 
-	icd->ops = &soc_camera_platform_ops;
-
 	ici = to_soc_camera_host(icd->parent);
 
 	v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
@@ -178,7 +163,6 @@
 	return ret;
 
 evdrs:
-	icd->ops = NULL;
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return ret;
@@ -187,11 +171,10 @@
 static int soc_camera_platform_remove(struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv = get_priv(pdev);
-	struct soc_camera_platform_info *p = pdev->dev.platform_data;
-	struct soc_camera_device *icd = p->icd;
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(&priv->subdev);
 
+	p->icd->control = NULL;
 	v4l2_device_unregister_subdev(&priv->subdev);
-	icd->ops = NULL;
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return 0;
diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c
index bea7c9c..cf7f219 100644
--- a/drivers/media/video/soc_mediabus.c
+++ b/drivers/media/video/soc_mediabus.c
@@ -383,6 +383,39 @@
 }
 EXPORT_SYMBOL(soc_mbus_get_fmtdesc);
 
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+					unsigned int flags)
+{
+	unsigned long common_flags;
+	bool hsync = true, vsync = true, pclk, data, mode;
+	bool mipi_lanes, mipi_clock;
+
+	common_flags = cfg->flags & flags;
+
+	switch (cfg->type) {
+	case V4L2_MBUS_PARALLEL:
+		hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+					V4L2_MBUS_HSYNC_ACTIVE_LOW);
+		vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+					V4L2_MBUS_VSYNC_ACTIVE_LOW);
+	case V4L2_MBUS_BT656:
+		pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING |
+				       V4L2_MBUS_PCLK_SAMPLE_FALLING);
+		data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH |
+				       V4L2_MBUS_DATA_ACTIVE_LOW);
+		mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
+		return (!hsync || !vsync || !pclk || !data || !mode) ?
+			0 : common_flags;
+	case V4L2_MBUS_CSI2:
+		mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
+		mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
+					     V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
+		return (!mipi_lanes || !mipi_clock) ? 0 : common_flags;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(soc_mbus_config_compatible);
+
 static int __init soc_mbus_init(void)
 {
 	return 0;
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index 10aff3f..d1b07ac 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-mediabus.h>
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b6ee1bd..462caa4 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <media/v4l2-int-device.h>
 
 #include "tcm825x.h"
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index 84cd1b6..a0895bf 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-dma-contig.h>
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index 9b3e828..926f039 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index e927d25..6abaa16 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <media/v4l2-device.h>
 #include <media/tvp5150.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
index 2e6059a..7875e80 100644
--- a/drivers/media/video/tvp7002.c
+++ b/drivers/media/video/tvp7002.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
+#include <linux/module.h>
 #include <media/tvp7002.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 742482e..a514fa6 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -22,11 +22,13 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-subdev.h>
+
 #include <media/soc_camera.h>
 #include <media/tw9910.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
 
 #define GET_ID(val)  ((val & 0xF8) >> 3)
 #define GET_REV(val) (val & 0x07)
@@ -203,6 +205,10 @@
 #define RTSEL_FIELD 0x06 /* 0110 = FIELD */
 #define RTSEL_RTCO  0x07 /* 0111 = RTCO ( Real Time Control ) */
 
+/* HSYNC start and end are constant for now */
+#define HSYNC_START	0x0260
+#define HSYNC_END	0x0300
+
 /*
  * structure
  */
@@ -220,22 +226,11 @@
 	u16             vscale;
 };
 
-struct tw9910_cropping_ctrl {
-	u16 vdelay;
-	u16 vactive;
-	u16 hdelay;
-	u16 hactive;
-};
-
-struct tw9910_hsync_ctrl {
-	u16 start;
-	u16 end;
-};
-
 struct tw9910_priv {
 	struct v4l2_subdev		subdev;
 	struct tw9910_video_info	*info;
 	const struct tw9910_scale_ctrl	*scale;
+	v4l2_std_id			norm;
 	u32				revision;
 };
 
@@ -329,11 +324,6 @@
 	},
 };
 
-static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = {
-	.start = 0x0260,
-	.end   = 0x0300,
-};
-
 /*
  * general function
  */
@@ -378,21 +368,20 @@
 	return ret;
 }
 
-static int tw9910_set_hsync(struct i2c_client *client,
-			    const struct tw9910_hsync_ctrl *hsync)
+static int tw9910_set_hsync(struct i2c_client *client)
 {
 	struct tw9910_priv *priv = to_tw9910(client);
 	int ret;
 
 	/* bit 10 - 3 */
 	ret = i2c_smbus_write_byte_data(client, HSBEGIN,
-					(hsync->start & 0x07F8) >> 3);
+					(HSYNC_START & 0x07F8) >> 3);
 	if (ret < 0)
 		return ret;
 
 	/* bit 10 - 3 */
 	ret = i2c_smbus_write_byte_data(client, HSEND,
-					(hsync->end & 0x07F8) >> 3);
+					(HSYNC_END & 0x07F8) >> 3);
 	if (ret < 0)
 		return ret;
 
@@ -400,8 +389,8 @@
 	/* bit 2 - 0 */
 	if (1 == priv->revision)
 		ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
-				      (hsync->start & 0x0007) << 4 |
-				      (hsync->end   & 0x0007));
+				      (HSYNC_START & 0x0007) << 4 |
+				      (HSYNC_END   & 0x0007));
 
 	return ret;
 }
@@ -433,12 +422,11 @@
 	return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
 }
 
-static const struct tw9910_scale_ctrl*
-tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height)
+static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
+							  u32 width, u32 height)
 {
 	const struct tw9910_scale_ctrl *scale;
 	const struct tw9910_scale_ctrl *ret = NULL;
-	v4l2_std_id norm = icd->vdev->current_norm;
 	__u32 diff = 0xffffffff, tmp;
 	int size, i;
 
@@ -465,7 +453,7 @@
 }
 
 /*
- * soc_camera_ops function
+ * subdevice operations
  */
 static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
 {
@@ -507,49 +495,27 @@
 	return tw9910_power(client, enable);
 }
 
-static int tw9910_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
+static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
 {
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 val = VSSL_VVALID | HSSL_DVALID;
-
-	/*
-	 * set OUTCTR1
-	 *
-	 * We use VVALID and DVALID signals to control VSYNC and HSYNC
-	 * outputs, in this mode their polarity is inverted.
-	 */
-	if (flags & SOCAM_HSYNC_ACTIVE_LOW)
-		val |= HSP_HI;
-
-	if (flags & SOCAM_VSYNC_ACTIVE_LOW)
-		val |= VSP_HI;
-
-	return i2c_smbus_write_byte_data(client, OUTCTR1, val);
-}
-
-static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct tw9910_priv *priv = to_tw9910(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_VSYNC_ACTIVE_LOW  | SOCAM_HSYNC_ACTIVE_LOW  |
-		SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
 
-	return soc_camera_apply_sensor_flags(icl, flags);
+	*norm = priv->norm;
+
+	return 0;
 }
 
 static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 {
-	int ret = -EINVAL;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
 
-	if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL))
-		ret = 0;
+	if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+		return -EINVAL;
 
-	return ret;
+	priv->norm = norm;
+
+	return 0;
 }
 
 static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
@@ -600,19 +566,17 @@
 }
 #endif
 
-static int tw9910_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
 {
-	struct v4l2_rect *rect = &a->c;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct tw9910_priv *priv = to_tw9910(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
-	int                 ret  = -EINVAL;
-	u8                  val;
+	int ret = -EINVAL;
+	u8 val;
 
 	/*
 	 * select suitable norm
 	 */
-	priv->scale = tw9910_select_norm(icd, rect->width, rect->height);
+	priv->scale = tw9910_select_norm(priv->norm, *width, *height);
 	if (!priv->scale)
 		goto tw9910_set_fmt_error;
 
@@ -670,14 +634,12 @@
 	/*
 	 * set hsync
 	 */
-	ret = tw9910_set_hsync(client, &tw9910_hsync_ctrl);
+	ret = tw9910_set_hsync(client);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
-	rect->width = priv->scale->width;
-	rect->height = priv->scale->height;
-	rect->left = 0;
-	rect->top = 0;
+	*width = priv->scale->width;
+	*height = priv->scale->height;
 
 	return ret;
 
@@ -694,25 +656,15 @@
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct tw9910_priv *priv = to_tw9910(client);
 
-	if (!priv->scale) {
-		int ret;
-		struct v4l2_crop crop = {
-			.c = {
-				.left	= 0,
-				.top	= 0,
-				.width	= 640,
-				.height	= 480,
-			},
-		};
-		ret = tw9910_s_crop(sd, &crop);
-		if (ret < 0)
-			return ret;
-	}
-
 	a->c.left	= 0;
 	a->c.top	= 0;
-	a->c.width	= priv->scale->width;
-	a->c.height	= priv->scale->height;
+	if (priv->norm & V4L2_STD_NTSC) {
+		a->c.width	= 640;
+		a->c.height	= 480;
+	} else {
+		a->c.width	= 768;
+		a->c.height	= 576;
+	}
 	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	return 0;
@@ -720,14 +672,19 @@
 
 static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+
 	a->bounds.left			= 0;
 	a->bounds.top			= 0;
-	a->bounds.width			= 768;
-	a->bounds.height		= 576;
-	a->defrect.left			= 0;
-	a->defrect.top			= 0;
-	a->defrect.width		= 640;
-	a->defrect.height		= 480;
+	if (priv->norm & V4L2_STD_NTSC) {
+		a->bounds.width		= 640;
+		a->bounds.height	= 480;
+	} else {
+		a->bounds.width		= 768;
+		a->bounds.height	= 576;
+	}
+	a->defrect			= a->bounds;
 	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
 	a->pixelaspect.denominator	= 1;
@@ -743,15 +700,8 @@
 
 	if (!priv->scale) {
 		int ret;
-		struct v4l2_crop crop = {
-			.c = {
-				.left	= 0,
-				.top	= 0,
-				.width	= 640,
-				.height	= 480,
-			},
-		};
-		ret = tw9910_s_crop(sd, &crop);
+		u32 width = 640, height = 480;
+		ret = tw9910_set_frame(sd, &width, &height);
 		if (ret < 0)
 			return ret;
 	}
@@ -768,17 +718,7 @@
 static int tw9910_s_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct tw9910_priv *priv = to_tw9910(client);
-	/* See tw9910_s_crop() - no proper cropping support */
-	struct v4l2_crop a = {
-		.c = {
-			.left	= 0,
-			.top	= 0,
-			.width	= mf->width,
-			.height	= mf->height,
-		},
-	};
+	u32 width = mf->width, height = mf->height;
 	int ret;
 
 	WARN_ON(mf->field != V4L2_FIELD_ANY &&
@@ -792,10 +732,10 @@
 
 	mf->colorspace = V4L2_COLORSPACE_JPEG;
 
-	ret = tw9910_s_crop(sd, &a);
+	ret = tw9910_set_frame(sd, &width, &height);
 	if (!ret) {
-		mf->width	= priv->scale->width;
-		mf->height	= priv->scale->height;
+		mf->width	= width;
+		mf->height	= height;
 	}
 	return ret;
 }
@@ -804,7 +744,7 @@
 			  struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct tw9910_priv *priv = to_tw9910(client);
 	const struct tw9910_scale_ctrl *scale;
 
 	if (V4L2_FIELD_ANY == mf->field) {
@@ -820,7 +760,7 @@
 	/*
 	 * select suitable norm
 	 */
-	scale = tw9910_select_norm(icd, mf->width, mf->height);
+	scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
 	if (!scale)
 		return -EINVAL;
 
@@ -830,16 +770,11 @@
 	return 0;
 }
 
-static int tw9910_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int tw9910_video_probe(struct i2c_client *client)
 {
 	struct tw9910_priv *priv = to_tw9910(client);
 	s32 id;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * tw9910 only use 8 or 16 bit bus width
 	 */
@@ -868,20 +803,15 @@
 	dev_info(&client->dev,
 		 "tw9910 Product ID %0x:%0x\n", id, priv->revision);
 
-	icd->vdev->tvnorms      = V4L2_STD_NTSC | V4L2_STD_PAL;
-	icd->vdev->current_norm = V4L2_STD_NTSC;
+	priv->norm = V4L2_STD_NTSC;
 
 	return 0;
 }
 
-static struct soc_camera_ops tw9910_ops = {
-	.set_bus_param		= tw9910_set_bus_param,
-	.query_bus_param	= tw9910_query_bus_param,
-};
-
 static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
 	.g_chip_ident	= tw9910_g_chip_ident,
 	.s_std		= tw9910_s_std,
+	.g_std		= tw9910_g_std,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= tw9910_g_register,
 	.s_register	= tw9910_s_register,
@@ -898,6 +828,45 @@
 	return 0;
 }
 
+static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	u8 val = VSSL_VVALID | HSSL_DVALID;
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+
+	/*
+	 * set OUTCTR1
+	 *
+	 * We use VVALID and DVALID signals to control VSYNC and HSYNC
+	 * outputs, in this mode their polarity is inverted.
+	 */
+	if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+		val |= HSP_HI;
+
+	if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+		val |= VSP_HI;
+
+	return i2c_smbus_write_byte_data(client, OUTCTR1, val);
+}
+
 static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 	.s_stream	= tw9910_s_stream,
 	.g_mbus_fmt	= tw9910_g_fmt,
@@ -905,8 +874,9 @@
 	.try_mbus_fmt	= tw9910_try_fmt,
 	.cropcap	= tw9910_cropcap,
 	.g_crop		= tw9910_g_crop,
-	.s_crop		= tw9910_s_crop,
 	.enum_mbus_fmt	= tw9910_enum_fmt,
+	.g_mbus_config	= tw9910_g_mbus_config,
+	.s_mbus_config	= tw9910_s_mbus_config,
 };
 
 static struct v4l2_subdev_ops tw9910_subdev_ops = {
@@ -922,23 +892,18 @@
 			const struct i2c_device_id *did)
 
 {
-	struct tw9910_priv             *priv;
-	struct tw9910_video_info       *info;
-	struct soc_camera_device       *icd = client->dev.platform_data;
-	struct i2c_adapter             *adapter =
+	struct tw9910_priv		*priv;
+	struct tw9910_video_info	*info;
+	struct i2c_adapter		*adapter =
 		to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link         *icl;
-	int                             ret;
+	struct soc_camera_link		*icl = soc_camera_i2c_to_link(client);
+	int				ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "TW9910: missing soc-camera data!\n");
+	if (!icl || !icl->priv) {
+		dev_err(&client->dev, "TW9910: missing platform data!\n");
 		return -EINVAL;
 	}
 
-	icl = to_soc_camera_link(icd);
-	if (!icl || !icl->priv)
-		return -EINVAL;
-
 	info = icl->priv;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -956,14 +921,9 @@
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
 
-	icd->ops     = &tw9910_ops;
-	icd->iface   = icl->bus_id;
-
-	ret = tw9910_video_probe(icd, client);
-	if (ret) {
-		icd->ops = NULL;
+	ret = tw9910_video_probe(client);
+	if (ret)
 		kfree(priv);
-	}
 
 	return ret;
 }
@@ -971,9 +931,7 @@
 static int tw9910_remove(struct i2c_client *client)
 {
 	struct tw9910_priv *priv = to_tw9910(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c
index 8f52661..3103d0d 100644
--- a/drivers/media/video/usbvision/usbvision-cards.c
+++ b/drivers/media/video/usbvision/usbvision-cards.c
@@ -24,6 +24,7 @@
 
 
 #include <linux/list.h>
+#include <linux/module.h>
 #include <media/v4l2-dev.h>
 #include <media/tuner.h>
 #include "usbvision.h"
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 10c2364..254d326 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1016,7 +1016,8 @@
 
 	menu_info = &mapping->menu_info[query_menu->index];
 
-	if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+	if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+	    (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
 		s32 bitmap;
 
 		if (!ctrl->cached) {
@@ -1225,7 +1226,8 @@
 		/* Valid menu indices are reported by the GET_RES request for
 		 * UVC controls that support it.
 		 */
-		if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+		if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+		    (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
 			if (!ctrl->cached) {
 				ret = uvc_ctrl_populate_cache(chain, ctrl);
 				if (ret < 0)
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 61979b7..c68531b 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -159,11 +159,25 @@
 	} fmt;
 };
 
-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+/**
+ * struct v4l2_create_buffers32 - VIDIOC_CREATE_BUFS32 argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers32 {
+	__u32			index;
+	__u32			count;
+	enum v4l2_memory        memory;
+	struct v4l2_format32	format;
+	__u32			reserved[8];
+};
+
+static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)) ||
-			get_user(kp->type, &up->type))
-			return -EFAULT;
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
@@ -192,11 +206,24 @@
 	}
 }
 
-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) ||
-		put_user(kp->type, &up->type))
-		return -EFAULT;
+	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)) ||
+			get_user(kp->type, &up->type))
+			return -EFAULT;
+	return __get_v4l2_format32(kp, up);
+}
+
+static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+{
+	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) ||
+	    copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format.fmt)))
+			return -EFAULT;
+	return __get_v4l2_format32(&kp->format, &up->format);
+}
+
+static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+{
 	switch (kp->type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
@@ -225,6 +252,22 @@
 	}
 }
 
+static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+{
+	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) ||
+		put_user(kp->type, &up->type))
+		return -EFAULT;
+	return __put_v4l2_format32(kp, up);
+}
+
+static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+{
+	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) ||
+	    copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format.fmt)))
+			return -EFAULT;
+	return __put_v4l2_format32(&kp->format, &up->format);
+}
+
 struct v4l2_standard32 {
 	__u32		     index;
 	__u32		     id[2]; /* __u64 would get the alignment wrong */
@@ -702,6 +745,8 @@
 #define VIDIOC_S_EXT_CTRLS32    _IOWR('V', 72, struct v4l2_ext_controls32)
 #define VIDIOC_TRY_EXT_CTRLS32  _IOWR('V', 73, struct v4l2_ext_controls32)
 #define	VIDIOC_DQEVENT32	_IOR ('V', 89, struct v4l2_event32)
+#define VIDIOC_CREATE_BUFS32	_IOWR('V', 92, struct v4l2_create_buffers32)
+#define VIDIOC_PREPARE_BUF32	_IOWR('V', 93, struct v4l2_buffer32)
 
 #define VIDIOC_OVERLAY32	_IOW ('V', 14, s32)
 #define VIDIOC_STREAMON32	_IOW ('V', 18, s32)
@@ -721,6 +766,7 @@
 		struct v4l2_standard v2s;
 		struct v4l2_ext_controls v2ecs;
 		struct v4l2_event v2ev;
+		struct v4l2_create_buffers v2crt;
 		unsigned long vx;
 		int vi;
 	} karg;
@@ -751,6 +797,8 @@
 	case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
 	case VIDIOC_G_OUTPUT32: cmd = VIDIOC_G_OUTPUT; break;
 	case VIDIOC_S_OUTPUT32: cmd = VIDIOC_S_OUTPUT; break;
+	case VIDIOC_CREATE_BUFS32: cmd = VIDIOC_CREATE_BUFS; break;
+	case VIDIOC_PREPARE_BUF32: cmd = VIDIOC_PREPARE_BUF; break;
 	}
 
 	switch (cmd) {
@@ -775,6 +823,12 @@
 		compatible_arg = 0;
 		break;
 
+	case VIDIOC_CREATE_BUFS:
+		err = get_v4l2_create32(&karg.v2crt, up);
+		compatible_arg = 0;
+		break;
+
+	case VIDIOC_PREPARE_BUF:
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
@@ -860,6 +914,10 @@
 		err = put_v4l2_format32(&karg.v2f, up);
 		break;
 
+	case VIDIOC_CREATE_BUFS:
+		err = put_v4l2_create32(&karg.v2crt, up);
+		break;
+
 	case VIDIOC_QUERYBUF:
 	case VIDIOC_QBUF:
 	case VIDIOC_DQBUF:
@@ -959,6 +1017,8 @@
 	case VIDIOC_DQEVENT32:
 	case VIDIOC_SUBSCRIBE_EVENT:
 	case VIDIOC_UNSUBSCRIBE_EVENT:
+	case VIDIOC_CREATE_BUFS32:
+	case VIDIOC_PREPARE_BUF32:
 		ret = do_video_ioctl(file, cmd, arg);
 		break;
 
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index fc8666a..0f415da 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -20,6 +20,7 @@
 
 #include <linux/ctype.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
@@ -210,6 +211,7 @@
 		"Disabled",
 		"50 Hz",
 		"60 Hz",
+		"Auto",
 		NULL
 	};
 	static const char * const camera_exposure_auto[] = {
@@ -819,8 +821,8 @@
 	fill_event(&ev, ctrl, changes);
 
 	list_for_each_entry(sev, &ctrl->ev_subs, node)
-		if (sev->fh && (sev->fh != fh ||
-				(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+		if (sev->fh != fh ||
+		    (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))
 			v4l2_event_queue_fh(sev->fh, &ev);
 }
 
@@ -945,6 +947,7 @@
 			if (ctrl->cluster[0]->has_volatiles)
 				ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
 		}
+		fh = NULL;
 	}
 	if (changed || update_inactive) {
 		/* If a control was changed that was not one of the controls
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index e6a2c3b..0edd618 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -20,7 +20,9 @@
 
 #include <linux/types.h>
 #include <linux/ioctl.h>
+#include <linux/module.h>
 #include <linux/i2c.h>
+#include <linux/slab.h>
 #if defined(CONFIG_SPI)
 #include <linux/spi/spi.h>
 #endif
@@ -193,6 +195,13 @@
 }
 EXPORT_SYMBOL_GPL(v4l2_device_register_subdev);
 
+static void v4l2_device_release_subdev_node(struct video_device *vdev)
+{
+	struct v4l2_subdev *sd = video_get_drvdata(vdev);
+	sd->devnode = NULL;
+	kfree(vdev);
+}
+
 int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev)
 {
 	struct video_device *vdev;
@@ -206,22 +215,40 @@
 		if (!(sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE))
 			continue;
 
-		vdev = &sd->devnode;
+		vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+		if (!vdev) {
+			err = -ENOMEM;
+			goto clean_up;
+		}
+
+		video_set_drvdata(vdev, sd);
 		strlcpy(vdev->name, sd->name, sizeof(vdev->name));
 		vdev->v4l2_dev = v4l2_dev;
 		vdev->fops = &v4l2_subdev_fops;
-		vdev->release = video_device_release_empty;
+		vdev->release = v4l2_device_release_subdev_node;
 		vdev->ctrl_handler = sd->ctrl_handler;
 		err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1,
 					      sd->owner);
-		if (err < 0)
-			return err;
+		if (err < 0) {
+			kfree(vdev);
+			goto clean_up;
+		}
 #if defined(CONFIG_MEDIA_CONTROLLER)
 		sd->entity.v4l.major = VIDEO_MAJOR;
 		sd->entity.v4l.minor = vdev->minor;
 #endif
+		sd->devnode = vdev;
 	}
 	return 0;
+
+clean_up:
+	list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
+		if (!sd->devnode)
+			break;
+		video_unregister_device(sd->devnode);
+	}
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(v4l2_device_register_subdev_nodes);
 
@@ -247,7 +274,7 @@
 	if (v4l2_dev->mdev)
 		media_device_unregister_entity(&sd->entity);
 #endif
-	video_unregister_device(&sd->devnode);
+	video_unregister_device(sd->devnode);
 	module_put(sd->owner);
 }
 EXPORT_SYMBOL_GPL(v4l2_device_unregister_subdev);
diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c
index 53b190c..c26ad96 100644
--- a/drivers/media/video/v4l2-event.c
+++ b/drivers/media/video/v4l2-event.c
@@ -29,6 +29,7 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 static unsigned sev_pos(const struct v4l2_subscribed_event *sev, unsigned idx)
 {
@@ -215,6 +216,9 @@
 	unsigned long flags;
 	unsigned i;
 
+	if (sub->type == V4L2_EVENT_ALL)
+		return -EINVAL;
+
 	if (elems < 1)
 		elems = 1;
 	if (sub->type == V4L2_EVENT_CTRL) {
@@ -282,6 +286,7 @@
 {
 	struct v4l2_subscribed_event *sev;
 	unsigned long flags;
+	int i;
 
 	if (sub->type == V4L2_EVENT_ALL) {
 		v4l2_event_unsubscribe_all(fh);
@@ -292,8 +297,12 @@
 
 	sev = v4l2_event_subscribed(fh, sub->type, sub->id);
 	if (sev != NULL) {
+		/* Remove any pending events for this subscription */
+		for (i = 0; i < sev->in_use; i++) {
+			list_del(&sev->events[sev_pos(sev, i)].list);
+			fh->navailable--;
+		}
 		list_del(&sev->list);
-		sev->fh = NULL;
 	}
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/video/v4l2-fh.c
index 122822d..9e3fc04 100644
--- a/drivers/media/video/v4l2-fh.c
+++ b/drivers/media/video/v4l2-fh.c
@@ -24,6 +24,7 @@
 
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-fh.h>
 #include <media/v4l2-event.h>
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
index a935bae..f447349 100644
--- a/drivers/media/video/v4l2-int-device.c
+++ b/drivers/media/video/v4l2-int-device.c
@@ -26,6 +26,7 @@
 #include <linux/list.h>
 #include <linux/sort.h>
 #include <linux/string.h>
+#include <linux/module.h>
 
 #include <media/v4l2-int-device.h>
 
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 24fd433..e1da8fc 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -273,6 +273,8 @@
 	[_IOC_NR(VIDIOC_DQEVENT)]	   = "VIDIOC_DQEVENT",
 	[_IOC_NR(VIDIOC_SUBSCRIBE_EVENT)]  = "VIDIOC_SUBSCRIBE_EVENT",
 	[_IOC_NR(VIDIOC_UNSUBSCRIBE_EVENT)] = "VIDIOC_UNSUBSCRIBE_EVENT",
+	[_IOC_NR(VIDIOC_CREATE_BUFS)]      = "VIDIOC_CREATE_BUFS",
+	[_IOC_NR(VIDIOC_PREPARE_BUF)]      = "VIDIOC_PREPARE_BUF",
 };
 #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
 
@@ -2104,6 +2106,40 @@
 		dbgarg(cmd, "type=0x%8.8x", sub->type);
 		break;
 	}
+	case VIDIOC_CREATE_BUFS:
+	{
+		struct v4l2_create_buffers *create = arg;
+
+		if (!ops->vidioc_create_bufs)
+			break;
+		if (ret_prio) {
+			ret = ret_prio;
+			break;
+		}
+		ret = check_fmt(ops, create->format.type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_create_bufs(file, fh, create);
+
+		dbgarg(cmd, "count=%d @ %d\n", create->count, create->index);
+		break;
+	}
+	case VIDIOC_PREPARE_BUF:
+	{
+		struct v4l2_buffer *b = arg;
+
+		if (!ops->vidioc_prepare_buf)
+			break;
+		ret = check_fmt(ops, b->type);
+		if (ret)
+			break;
+
+		ret = ops->vidioc_prepare_buf(file, fh, b);
+
+		dbgarg(cmd, "index=%d", b->index);
+		break;
+	}
 	default:
 		if (!ops->vidioc_default)
 			break;
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 179e20e..65ade5f 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/videodev2.h>
+#include <linux/export.h>
 
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 3f5c7a3..95a3f5e 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -38,7 +38,8 @@
 	(((q)->ops->op) ? ((q)->ops->op(args)) : 0)
 
 #define V4L2_BUFFER_STATE_FLAGS	(V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \
-				 V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR)
+				 V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR | \
+				 V4L2_BUF_FLAG_PREPARED)
 
 /**
  * __vb2_buf_mem_alloc() - allocate video memory for the given buffer
@@ -109,18 +110,28 @@
  * __setup_offsets() - setup unique offsets ("cookies") for every plane in
  * every buffer on the queue
  */
-static void __setup_offsets(struct vb2_queue *q)
+static void __setup_offsets(struct vb2_queue *q, unsigned int n)
 {
 	unsigned int buffer, plane;
 	struct vb2_buffer *vb;
-	unsigned long off = 0;
+	unsigned long off;
 
-	for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+	if (q->num_buffers) {
+		struct v4l2_plane *p;
+		vb = q->bufs[q->num_buffers - 1];
+		p = &vb->v4l2_planes[vb->num_planes - 1];
+		off = PAGE_ALIGN(p->m.mem_offset + p->length);
+	} else {
+		off = 0;
+	}
+
+	for (buffer = q->num_buffers; buffer < q->num_buffers + n; ++buffer) {
 		vb = q->bufs[buffer];
 		if (!vb)
 			continue;
 
 		for (plane = 0; plane < vb->num_planes; ++plane) {
+			vb->v4l2_planes[plane].length = q->plane_sizes[plane];
 			vb->v4l2_planes[plane].m.mem_offset = off;
 
 			dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n",
@@ -161,7 +172,7 @@
 		vb->state = VB2_BUF_STATE_DEQUEUED;
 		vb->vb2_queue = q;
 		vb->num_planes = num_planes;
-		vb->v4l2_buf.index = buffer;
+		vb->v4l2_buf.index = q->num_buffers + buffer;
 		vb->v4l2_buf.type = q->type;
 		vb->v4l2_buf.memory = memory;
 
@@ -189,15 +200,13 @@
 			}
 		}
 
-		q->bufs[buffer] = vb;
+		q->bufs[q->num_buffers + buffer] = vb;
 	}
 
-	q->num_buffers = buffer;
-
-	__setup_offsets(q);
+	__setup_offsets(q, buffer);
 
 	dprintk(1, "Allocated %d buffers, %d plane(s) each\n",
-			q->num_buffers, num_planes);
+			buffer, num_planes);
 
 	return buffer;
 }
@@ -205,12 +214,13 @@
 /**
  * __vb2_free_mem() - release all video buffer memory for a given queue
  */
-static void __vb2_free_mem(struct vb2_queue *q)
+static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers)
 {
 	unsigned int buffer;
 	struct vb2_buffer *vb;
 
-	for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+	for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+	     ++buffer) {
 		vb = q->bufs[buffer];
 		if (!vb)
 			continue;
@@ -224,17 +234,18 @@
 }
 
 /**
- * __vb2_queue_free() - free the queue - video memory and related information
- * and return the queue to an uninitialized state. Might be called even if the
- * queue has already been freed.
+ * __vb2_queue_free() - free buffers at the end of the queue - video memory and
+ * related information, if no buffers are left return the queue to an
+ * uninitialized state. Might be called even if the queue has already been freed.
  */
-static void __vb2_queue_free(struct vb2_queue *q)
+static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
 {
 	unsigned int buffer;
 
 	/* Call driver-provided cleanup function for each buffer, if provided */
 	if (q->ops->buf_cleanup) {
-		for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+		for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+		     ++buffer) {
 			if (NULL == q->bufs[buffer])
 				continue;
 			q->ops->buf_cleanup(q->bufs[buffer]);
@@ -242,23 +253,26 @@
 	}
 
 	/* Release video buffer memory */
-	__vb2_free_mem(q);
+	__vb2_free_mem(q, buffers);
 
 	/* Free videobuf buffers */
-	for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+	for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+	     ++buffer) {
 		kfree(q->bufs[buffer]);
 		q->bufs[buffer] = NULL;
 	}
 
-	q->num_buffers = 0;
-	q->memory = 0;
+	q->num_buffers -= buffers;
+	if (!q->num_buffers)
+		q->memory = 0;
+	INIT_LIST_HEAD(&q->queued_list);
 }
 
 /**
  * __verify_planes_array() - verify that the planes array passed in struct
  * v4l2_buffer from userspace can be safely used
  */
-static int __verify_planes_array(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer *b)
 {
 	/* Is memory for copying plane information present? */
 	if (NULL == b->m.planes) {
@@ -284,14 +298,14 @@
 {
 	unsigned int plane;
 	for (plane = 0; plane < vb->num_planes; ++plane) {
+		void *mem_priv = vb->planes[plane].mem_priv;
 		/*
 		 * If num_users() has not been provided, call_memop
 		 * will return 0, apparently nobody cares about this
 		 * case anyway. If num_users() returns more than 1,
 		 * we are not the only user of the plane's memory.
 		 */
-		if (call_memop(q, plane, num_users,
-				vb->planes[plane].mem_priv) > 1)
+		if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1)
 			return true;
 	}
 	return false;
@@ -318,7 +332,7 @@
 static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b)
 {
 	struct vb2_queue *q = vb->vb2_queue;
-	int ret = 0;
+	int ret;
 
 	/* Copy back data such as timestamp, flags, input, etc. */
 	memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m));
@@ -365,6 +379,9 @@
 	case VB2_BUF_STATE_DONE:
 		b->flags |= V4L2_BUF_FLAG_DONE;
 		break;
+	case VB2_BUF_STATE_PREPARED:
+		b->flags |= V4L2_BUF_FLAG_PREPARED;
+		break;
 	case VB2_BUF_STATE_DEQUEUED:
 		/* nothing */
 		break;
@@ -373,7 +390,7 @@
 	if (__buffer_in_use(q, vb))
 		b->flags |= V4L2_BUF_FLAG_MAPPED;
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -459,7 +476,7 @@
  */
 int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 {
-	unsigned int num_buffers, num_planes;
+	unsigned int num_buffers, allocated_buffers, num_planes = 0;
 	int ret = 0;
 
 	if (q->fileio) {
@@ -507,7 +524,7 @@
 			return -EBUSY;
 		}
 
-		__vb2_queue_free(q);
+		__vb2_queue_free(q, q->num_buffers);
 
 		/*
 		 * In case of REQBUFS(0) return immediately without calling
@@ -529,7 +546,7 @@
 	 * Ask the driver how many buffers and planes per buffer it requires.
 	 * Driver also sets the size and allocator context for each plane.
 	 */
-	ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
+	ret = call_qop(q, queue_setup, q, NULL, &num_buffers, &num_planes,
 		       q->plane_sizes, q->alloc_ctx);
 	if (ret)
 		return ret;
@@ -541,44 +558,168 @@
 		return -ENOMEM;
 	}
 
+	allocated_buffers = ret;
+
 	/*
 	 * Check if driver can handle the allocated number of buffers.
 	 */
-	if (ret < num_buffers) {
-		unsigned int orig_num_buffers;
+	if (allocated_buffers < num_buffers) {
+		num_buffers = allocated_buffers;
 
-		orig_num_buffers = num_buffers = ret;
-		ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
-			       q->plane_sizes, q->alloc_ctx);
-		if (ret)
-			goto free_mem;
+		ret = call_qop(q, queue_setup, q, NULL, &num_buffers,
+			       &num_planes, q->plane_sizes, q->alloc_ctx);
 
-		if (orig_num_buffers < num_buffers) {
+		if (!ret && allocated_buffers < num_buffers)
 			ret = -ENOMEM;
-			goto free_mem;
-		}
 
 		/*
-		 * Ok, driver accepted smaller number of buffers.
+		 * Either the driver has accepted a smaller number of buffers,
+		 * or .queue_setup() returned an error
 		 */
-		ret = num_buffers;
+	}
+
+	q->num_buffers = allocated_buffers;
+
+	if (ret < 0) {
+		__vb2_queue_free(q, allocated_buffers);
+		return ret;
 	}
 
 	/*
 	 * Return the number of successfully allocated buffers
 	 * to the userspace.
 	 */
-	req->count = ret;
+	req->count = allocated_buffers;
 
 	return 0;
-
-free_mem:
-	__vb2_queue_free(q);
-	return ret;
 }
 EXPORT_SYMBOL_GPL(vb2_reqbufs);
 
 /**
+ * vb2_create_bufs() - Allocate buffers and any required auxiliary structs
+ * @q:		videobuf2 queue
+ * @create:	creation parameters, passed from userspace to vidioc_create_bufs
+ *		handler in driver
+ *
+ * Should be called from vidioc_create_bufs ioctl handler of a driver.
+ * This function:
+ * 1) verifies parameter sanity
+ * 2) calls the .queue_setup() queue operation
+ * 3) performs any necessary memory allocations
+ *
+ * The return values from this function are intended to be directly returned
+ * from vidioc_create_bufs handler in driver.
+ */
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
+{
+	unsigned int num_planes = 0, num_buffers, allocated_buffers;
+	int ret = 0;
+
+	if (q->fileio) {
+		dprintk(1, "%s(): file io in progress\n", __func__);
+		return -EBUSY;
+	}
+
+	if (create->memory != V4L2_MEMORY_MMAP
+			&& create->memory != V4L2_MEMORY_USERPTR) {
+		dprintk(1, "%s(): unsupported memory type\n", __func__);
+		return -EINVAL;
+	}
+
+	if (create->format.type != q->type) {
+		dprintk(1, "%s(): requested type is incorrect\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Make sure all the required memory ops for given memory type
+	 * are available.
+	 */
+	if (create->memory == V4L2_MEMORY_MMAP && __verify_mmap_ops(q)) {
+		dprintk(1, "%s(): MMAP for current setup unsupported\n", __func__);
+		return -EINVAL;
+	}
+
+	if (create->memory == V4L2_MEMORY_USERPTR && __verify_userptr_ops(q)) {
+		dprintk(1, "%s(): USERPTR for current setup unsupported\n", __func__);
+		return -EINVAL;
+	}
+
+	if (q->num_buffers == VIDEO_MAX_FRAME) {
+		dprintk(1, "%s(): maximum number of buffers already allocated\n",
+			__func__);
+		return -ENOBUFS;
+	}
+
+	create->index = q->num_buffers;
+
+	if (!q->num_buffers) {
+		memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
+		memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
+		q->memory = create->memory;
+	}
+
+	num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
+
+	/*
+	 * Ask the driver, whether the requested number of buffers, planes per
+	 * buffer and their sizes are acceptable
+	 */
+	ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
+		       &num_planes, q->plane_sizes, q->alloc_ctx);
+	if (ret)
+		return ret;
+
+	/* Finally, allocate buffers and video memory */
+	ret = __vb2_queue_alloc(q, create->memory, num_buffers,
+				num_planes);
+	if (ret < 0) {
+		dprintk(1, "Memory allocation failed with error: %d\n", ret);
+		return ret;
+	}
+
+	allocated_buffers = ret;
+
+	/*
+	 * Check if driver can handle the so far allocated number of buffers.
+	 */
+	if (ret < num_buffers) {
+		num_buffers = ret;
+
+		/*
+		 * q->num_buffers contains the total number of buffers, that the
+		 * queue driver has set up
+		 */
+		ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
+			       &num_planes, q->plane_sizes, q->alloc_ctx);
+
+		if (!ret && allocated_buffers < num_buffers)
+			ret = -ENOMEM;
+
+		/*
+		 * Either the driver has accepted a smaller number of buffers,
+		 * or .queue_setup() returned an error
+		 */
+	}
+
+	q->num_buffers += allocated_buffers;
+
+	if (ret < 0) {
+		__vb2_queue_free(q, allocated_buffers);
+		return ret;
+	}
+
+	/*
+	 * Return the number of successfully allocated buffers
+	 * to the userspace.
+	 */
+	create->count = allocated_buffers;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_create_bufs);
+
+/**
  * vb2_plane_vaddr() - Return a kernel virtual address of a given plane
  * @vb:		vb2_buffer to which the plane in question belongs to
  * @plane_no:	plane number for which the address is to be returned
@@ -662,7 +803,7 @@
  * __fill_vb2_buffer() - fill a vb2_buffer with information provided in
  * a v4l2_buffer by the userspace
  */
-static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b,
+static int __fill_vb2_buffer(struct vb2_buffer *vb, const struct v4l2_buffer *b,
 				struct v4l2_plane *v4l2_planes)
 {
 	unsigned int plane;
@@ -726,7 +867,7 @@
 /**
  * __qbuf_userptr() - handle qbuf of a USERPTR buffer
  */
-static int __qbuf_userptr(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __qbuf_userptr(struct vb2_buffer *vb, const struct v4l2_buffer *b)
 {
 	struct v4l2_plane planes[VIDEO_MAX_PLANES];
 	struct vb2_queue *q = vb->vb2_queue;
@@ -815,7 +956,7 @@
 /**
  * __qbuf_mmap() - handle qbuf of an MMAP buffer
  */
-static int __qbuf_mmap(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __qbuf_mmap(struct vb2_buffer *vb, const struct v4l2_buffer *b)
 {
 	return __fill_vb2_buffer(vb, b, vb->v4l2_planes);
 }
@@ -832,6 +973,95 @@
 	q->ops->buf_queue(vb);
 }
 
+static int __buf_prepare(struct vb2_buffer *vb, const struct v4l2_buffer *b)
+{
+	struct vb2_queue *q = vb->vb2_queue;
+	int ret;
+
+	switch (q->memory) {
+	case V4L2_MEMORY_MMAP:
+		ret = __qbuf_mmap(vb, b);
+		break;
+	case V4L2_MEMORY_USERPTR:
+		ret = __qbuf_userptr(vb, b);
+		break;
+	default:
+		WARN(1, "Invalid queue type\n");
+		ret = -EINVAL;
+	}
+
+	if (!ret)
+		ret = call_qop(q, buf_prepare, vb);
+	if (ret)
+		dprintk(1, "qbuf: buffer preparation failed: %d\n", ret);
+	else
+		vb->state = VB2_BUF_STATE_PREPARED;
+
+	return ret;
+}
+
+/**
+ * vb2_prepare_buf() - Pass ownership of a buffer from userspace to the kernel
+ * @q:		videobuf2 queue
+ * @b:		buffer structure passed from userspace to vidioc_prepare_buf
+ *		handler in driver
+ *
+ * Should be called from vidioc_prepare_buf ioctl handler of a driver.
+ * This function:
+ * 1) verifies the passed buffer,
+ * 2) calls buf_prepare callback in the driver (if provided), in which
+ *    driver-specific buffer initialization can be performed,
+ *
+ * The return values from this function are intended to be directly returned
+ * from vidioc_prepare_buf handler in driver.
+ */
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b)
+{
+	struct vb2_buffer *vb;
+	int ret;
+
+	if (q->fileio) {
+		dprintk(1, "%s(): file io in progress\n", __func__);
+		return -EBUSY;
+	}
+
+	if (b->type != q->type) {
+		dprintk(1, "%s(): invalid buffer type\n", __func__);
+		return -EINVAL;
+	}
+
+	if (b->index >= q->num_buffers) {
+		dprintk(1, "%s(): buffer index out of range\n", __func__);
+		return -EINVAL;
+	}
+
+	vb = q->bufs[b->index];
+	if (NULL == vb) {
+		/* Should never happen */
+		dprintk(1, "%s(): buffer is NULL\n", __func__);
+		return -EINVAL;
+	}
+
+	if (b->memory != q->memory) {
+		dprintk(1, "%s(): invalid memory type\n", __func__);
+		return -EINVAL;
+	}
+
+	if (vb->state != VB2_BUF_STATE_DEQUEUED) {
+		dprintk(1, "%s(): invalid buffer state %d\n", __func__, vb->state);
+		return -EINVAL;
+	}
+
+	ret = __buf_prepare(vb, b);
+	if (ret < 0)
+		return ret;
+
+	__fill_v4l2_buffer(vb, b);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_prepare_buf);
+
 /**
  * vb2_qbuf() - Queue a buffer from userspace
  * @q:		videobuf2 queue
@@ -841,8 +1071,8 @@
  * Should be called from vidioc_qbuf ioctl handler of a driver.
  * This function:
  * 1) verifies the passed buffer,
- * 2) calls buf_prepare callback in the driver (if provided), in which
- *    driver-specific buffer initialization can be performed,
+ * 2) if necessary, calls buf_prepare callback in the driver (if provided), in
+ *    which driver-specific buffer initialization can be performed,
  * 3) if streaming is on, queues the buffer in driver by the means of buf_queue
  *    callback for processing.
  *
@@ -852,7 +1082,7 @@
 int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
 {
 	struct vb2_buffer *vb;
-	int ret = 0;
+	int ret;
 
 	if (q->fileio) {
 		dprintk(1, "qbuf: file io in progress\n");
@@ -881,29 +1111,18 @@
 		return -EINVAL;
 	}
 
-	if (vb->state != VB2_BUF_STATE_DEQUEUED) {
+	switch (vb->state) {
+	case VB2_BUF_STATE_DEQUEUED:
+		ret = __buf_prepare(vb, b);
+		if (ret)
+			return ret;
+	case VB2_BUF_STATE_PREPARED:
+		break;
+	default:
 		dprintk(1, "qbuf: buffer already in use\n");
 		return -EINVAL;
 	}
 
-	if (q->memory == V4L2_MEMORY_MMAP)
-		ret = __qbuf_mmap(vb, b);
-	else if (q->memory == V4L2_MEMORY_USERPTR)
-		ret = __qbuf_userptr(vb, b);
-	else {
-		WARN(1, "Invalid queue type\n");
-		return -EINVAL;
-	}
-
-	if (ret)
-		return ret;
-
-	ret = call_qop(q, buf_prepare, vb);
-	if (ret) {
-		dprintk(1, "qbuf: buffer preparation failed\n");
-		return ret;
-	}
-
 	/*
 	 * Add to the queued buffers list, a buffer will stay on it until
 	 * dequeued in dqbuf.
@@ -918,6 +1137,9 @@
 	if (q->streaming)
 		__enqueue_in_driver(vb);
 
+	/* Fill buffer information for the userspace */
+	__fill_v4l2_buffer(vb, b);
+
 	dprintk(1, "qbuf of buffer %d succeeded\n", vb->v4l2_buf.index);
 	return 0;
 }
@@ -1347,6 +1569,37 @@
 }
 EXPORT_SYMBOL_GPL(vb2_mmap);
 
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+				    unsigned long addr,
+				    unsigned long len,
+				    unsigned long pgoff,
+				    unsigned long flags)
+{
+	unsigned long off = pgoff << PAGE_SHIFT;
+	struct vb2_buffer *vb;
+	unsigned int buffer, plane;
+	int ret;
+
+	if (q->memory != V4L2_MEMORY_MMAP) {
+		dprintk(1, "Queue is not currently set up for mmap\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Find the plane corresponding to the offset passed by userspace.
+	 */
+	ret = __find_plane_by_offset(q, off, &buffer, &plane);
+	if (ret)
+		return ret;
+
+	vb = q->bufs[buffer];
+
+	return (unsigned long)vb2_plane_vaddr(vb, plane);
+}
+EXPORT_SYMBOL_GPL(vb2_get_unmapped_area);
+#endif
+
 static int __vb2_init_fileio(struct vb2_queue *q, int read);
 static int __vb2_cleanup_fileio(struct vb2_queue *q);
 
@@ -1464,7 +1717,7 @@
 {
 	__vb2_cleanup_fileio(q);
 	__vb2_queue_cancel(q);
-	__vb2_queue_free(q);
+	__vb2_queue_free(q, q->num_buffers);
 }
 EXPORT_SYMBOL_GPL(vb2_queue_release);
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 7cf94c0..7d754fb 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -650,9 +650,9 @@
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
-				unsigned int *nplanes, unsigned int sizes[],
-				void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct vivi_dev *dev = vb2_get_drv_priv(vq);
 	unsigned long size;
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 8c1d85e..56ff19c 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -17,6 +17,7 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "memstick"
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 4a1909a..9729b92 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/memstick.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "mspro_block"
 
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index d89d925..6ce70e9 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -17,6 +17,7 @@
 #include <linux/highmem.h>
 #include <linux/memstick.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "jmb38x_ms"
 
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 03f71a4..b7aacf4 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -17,6 +17,7 @@
 #include <linux/highmem.h>
 #include <linux/scatterlist.h>
 #include <linux/log2.h>
+#include <linux/module.h>
 #include <asm/io.h>
 
 #define DRIVER_NAME "tifm_ms"
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index 73e4658..7190d52 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/i2o.h>
+#include <linux/module.h>
 #include "core.h"
 
 #define OSM_DESCRIPTION	"I2O-subsystem"
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a67adcb..f1391c2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,23 +2,8 @@
 # Multifunction miscellaneous devices
 #
 
-menuconfig MFD_SUPPORT
-	bool "Multifunction device drivers"
-	depends on HAS_IOMEM
-	default y
-	help
-	  Multifunction devices embed several functions (e.g. GPIOs,
-	  touchscreens, keyboards, current regulators, power management chips,
-	  etc...) in one single integrated circuit. They usually talk to the
-	  main CPU through one or more IRQ lines and low speed data busses (SPI,
-	  I2C, etc..). They appear as one single device to the main system
-	  through the data bus and the MFD framework allows for sub devices
-	  (a.k.a. functions) to appear as discrete platform devices.
-	  MFDs are typically found on embedded platforms.
-
-	  This option alone does not add any kernel code.
-
-if MFD_SUPPORT
+if HAS_IOMEM
+menu "Multifunction device drivers"
 
 config MFD_CORE
 	tristate
@@ -390,6 +375,7 @@
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
 	  CODEC.  This driver provides common support for accessing
@@ -503,6 +489,7 @@
 config MFD_PCF50633
 	tristate "Support for NXP PCF50633"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  Say yes here if you have NXP PCF50633 chip on your board.
 	  This core driver provides register access and IRQ handling
@@ -579,6 +566,23 @@
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
+config AB5500_CORE
+	bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
+	depends on ABX500_CORE && MFD_DB5500_PRCMU
+	select MFD_CORE
+	help
+	  Select this option to enable access to AB5500 power management
+	  chip. This connects to the db5500 chip via the I2C bus via PRCMU.
+	  This chip embeds various other multimedia funtionalities as well.
+
+config AB5500_DEBUG
+	bool "Enable debug info via debugfs"
+	depends on AB5500_CORE && DEBUG_FS
+	default y if DEBUG_FS
+	help
+	  Select this option if you want debug information from the AB5500
+	  using the debug filesystem, debugfs.
+
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 	depends on GENERIC_HARDIRQS && ABX500_CORE
@@ -615,20 +619,6 @@
 	help
 	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 
-config AB3550_CORE
-        bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
-	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
-	help
-	  Select this to enable the AB3550 Mixed Signal IC core
-	  functionality. This connects to a AB3550 on the I2C bus
-	  and expose a number of symbols needed for dependent devices
-	  to read and write registers and subscribe to events from
-	  this multi-functional IC. This is needed to use other features
-	  of the AB3550 such as battery-backed RTC, charging control,
-	  LEDs, vibrator, system power and temperature, power management
-	  and ALSA sound.
-
 config MFD_DB8500_PRCMU
 	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 	depends on UX500_SOC_DB8500
@@ -773,7 +763,17 @@
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
-endif # MFD_SUPPORT
+config MFD_INTEL_MSIC
+	bool "Support for Intel MSIC"
+	depends on INTEL_SCU_IPC
+	select MFD_CORE
+	help
+	  Select this option to enable access to Intel MSIC (Avatele
+	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
+	  devices used in Intel Medfield platforms.
+
+endmenu
+endif
 
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c580203..b2292eb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -79,7 +79,8 @@
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
+obj-$(CONFIG_AB5500_CORE)	+= ab5500-core.o
+obj-$(CONFIG_AB5500_DEBUG)	+= ab5500-debugfs.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
@@ -102,3 +103,4 @@
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 345dc65..02c4201 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -295,7 +295,7 @@
 {
 	struct aat2870_data *aat2870 = file->private_data;
 	char buf[32];
-	int buf_size;
+	ssize_t buf_size;
 	char *start = buf;
 	unsigned long addr, val;
 	int ret;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index a20e1c4..60107ee 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -12,6 +12,7 @@
 #include <linux/notifier.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -809,7 +810,7 @@
 	char	*name;
 };
 
-static const struct ab_family_id ids[] __devinitdata = {
+static const struct ab_family_id ids[] __devinitconst = {
 	/* AB3100 */
 	{
 		.id = 0xc0,
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
deleted file mode 100644
index 56ba194..0000000
--- a/drivers/mfd/ab3550-core.c
+++ /dev/null
@@ -1,1380 +0,0 @@
-/*
- * Copyright (C) 2007-2010 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB3550 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/workqueue.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/mfd/abx500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-
-#define AB3550_NAME_STRING "ab3550"
-#define AB3550_ID_FORMAT_STRING "AB3550 %s"
-#define AB3550_NUM_BANKS 2
-#define AB3550_NUM_EVENT_REG 5
-
-/* These are the only registers inside AB3550 used in this main file */
-
-/* Chip ID register */
-#define AB3550_CID_REG           0x20
-
-/* Interrupt event registers */
-#define AB3550_EVENT_BANK        0
-#define AB3550_EVENT_REG         0x22
-
-/* Read/write operation values. */
-#define AB3550_PERM_RD (0x01)
-#define AB3550_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB3550_PERM_RO (AB3550_PERM_RD)
-#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
-
-/**
- * struct ab3550
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @i2c_client: I2C client for this chip
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @mask_work: a worker for writing to mask registers
- * @event_lock: a lock to protect the event_mask
- * @event_mask: a local copy of the mask event registers
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab3550 {
-	struct mutex access_mutex;
-	struct i2c_client *i2c_client[AB3550_NUM_BANKS];
-	char chip_name[32];
-	u8 chip_id;
-	struct work_struct mask_work;
-	spinlock_t event_lock;
-	u8 event_mask[AB3550_NUM_EVENT_REG];
-	u8 startup_events[AB3550_NUM_EVENT_REG];
-	bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
-	unsigned int debug_bank;
-	unsigned int debug_address;
-#endif
-};
-
-/**
- * struct ab3550_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab3550_reg_range {
-	u8 first;
-	u8 last;
-	u8 perm;
-};
-
-/**
- * struct ab3550_reg_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab3550_reg_ranges {
-	u8 count;
-	const struct ab3550_reg_range *range;
-};
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used).  Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-
-static struct
-ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
-	[AB3550_DEVID_DAC] = {
-		NO_RANGE,
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0xb0,
-					.last = 0xba,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0xbc,
-					.last = 0xc3,
-					.perm = AB3550_PERM_RW,
-				},
-			},
-		},
-	},
-	[AB3550_DEVID_LEDS] = {
-		NO_RANGE,
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x5a,
-					.last = 0x88,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x8a,
-					.last = 0xad,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_POWER] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_REGULATORS] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x69,
-					.last = 0xa3,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x14,
-					.last = 0x16,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_SIM] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x14,
-					.last = 0x17,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-
-		},
-	},
-	[AB3550_DEVID_UART] = {
-		NO_RANGE,
-		NO_RANGE,
-	},
-	[AB3550_DEVID_RTC] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x00,
-					.last = 0x0c,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_CHARGER] = {
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x10,
-					.last = 0x1a,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-	[AB3550_DEVID_ADC] = {
-		NO_RANGE,
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x20,
-					.last = 0x56,
-					.perm = AB3550_PERM_RW,
-				},
-
-			}
-		},
-	},
-	[AB3550_DEVID_FUELGAUGE] = {
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x21,
-					.last = 0x21,
-					.perm = AB3550_PERM_RO,
-				},
-			}
-		},
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x00,
-					.last = 0x0e,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-	},
-	[AB3550_DEVID_VIBRATOR] = {
-		NO_RANGE,
-		{
-			.count = 1,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x10,
-					.last = 0x13,
-					.perm = AB3550_PERM_RW,
-				},
-
-			}
-		},
-	},
-	[AB3550_DEVID_CODEC] = {
-		{
-			.count = 2,
-			.range = (struct ab3550_reg_range[]) {
-				{
-					.first = 0x31,
-					.last = 0x63,
-					.perm = AB3550_PERM_RW,
-				},
-				{
-					.first = 0x65,
-					.last = 0x68,
-					.perm = AB3550_PERM_RW,
-				},
-			}
-		},
-		NO_RANGE,
-	},
-};
-
-static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
-	[AB3550_DEVID_DAC] = {
-		.name = "ab3550-dac",
-		.id = AB3550_DEVID_DAC,
-		.num_resources = 0,
-	},
-	[AB3550_DEVID_LEDS] = {
-		.name = "ab3550-leds",
-		.id = AB3550_DEVID_LEDS,
-	},
-	[AB3550_DEVID_POWER] = {
-		.name = "ab3550-power",
-		.id = AB3550_DEVID_POWER,
-	},
-	[AB3550_DEVID_REGULATORS] = {
-		.name = "ab3550-regulators",
-		.id = AB3550_DEVID_REGULATORS,
-	},
-	[AB3550_DEVID_SIM] = {
-		.name = "ab3550-sim",
-		.id = AB3550_DEVID_SIM,
-	},
-	[AB3550_DEVID_UART] = {
-		.name = "ab3550-uart",
-		.id = AB3550_DEVID_UART,
-	},
-	[AB3550_DEVID_RTC] = {
-		.name = "ab3550-rtc",
-		.id = AB3550_DEVID_RTC,
-	},
-	[AB3550_DEVID_CHARGER] = {
-		.name = "ab3550-charger",
-		.id = AB3550_DEVID_CHARGER,
-	},
-	[AB3550_DEVID_ADC] = {
-		.name = "ab3550-adc",
-		.id = AB3550_DEVID_ADC,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "TRIGGER-0",
-				.flags = IORESOURCE_IRQ,
-				.start = 16,
-				.end = 16,
-			},
-			{
-				.name = "TRIGGER-1",
-				.flags = IORESOURCE_IRQ,
-				.start = 17,
-				.end = 17,
-			},
-			{
-				.name = "TRIGGER-2",
-				.flags = IORESOURCE_IRQ,
-				.start = 18,
-				.end = 18,
-			},
-			{
-				.name = "TRIGGER-3",
-				.flags = IORESOURCE_IRQ,
-				.start = 19,
-				.end = 19,
-			},
-			{
-				.name = "TRIGGER-4",
-				.flags = IORESOURCE_IRQ,
-				.start = 20,
-				.end = 20,
-			},
-			{
-				.name = "TRIGGER-5",
-				.flags = IORESOURCE_IRQ,
-				.start = 21,
-				.end = 21,
-			},
-			{
-				.name = "TRIGGER-6",
-				.flags = IORESOURCE_IRQ,
-				.start = 22,
-				.end = 22,
-			},
-			{
-				.name = "TRIGGER-7",
-				.flags = IORESOURCE_IRQ,
-				.start = 23,
-				.end = 23,
-			},
-			{
-				.name = "TRIGGER-VBAT-TXON",
-				.flags = IORESOURCE_IRQ,
-				.start = 13,
-				.end = 13,
-			},
-			{
-				.name = "TRIGGER-VBAT",
-				.flags = IORESOURCE_IRQ,
-				.start = 12,
-				.end = 12,
-			},
-		},
-	},
-	[AB3550_DEVID_FUELGAUGE] = {
-		.name = "ab3550-fuelgauge",
-		.id = AB3550_DEVID_FUELGAUGE,
-	},
-	[AB3550_DEVID_VIBRATOR] = {
-		.name = "ab3550-vibrator",
-		.id = AB3550_DEVID_VIBRATOR,
-	},
-	[AB3550_DEVID_CODEC] = {
-		.name = "ab3550-codec",
-		.id = AB3550_DEVID_CODEC,
-	},
-};
-
-/*
- * I2C transactions with error messages.
- */
-static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
-	u8 count)
-{
-	int err;
-
-	err = i2c_master_send(ab->i2c_client[bank], data, count);
-	if (err < 0) {
-		dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
-		return err;
-	}
-	return 0;
-}
-
-static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
-	u8 count)
-{
-	int err;
-
-	err = i2c_master_recv(ab->i2c_client[bank], data, count);
-	if (err < 0) {
-		dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
-		return err;
-	}
-	return 0;
-}
-
-/*
- * Functionality for getting/setting register values.
- */
-static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
-	u8 *value)
-{
-	int err;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	err = ab3550_i2c_master_send(ab, bank, &reg, 1);
-	if (!err)
-		err = ab3550_i2c_master_recv(ab, bank, value, 1);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	int err;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
-	if (!err)
-		err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues)
-{
-	int err = 0;
-
-	if (likely(bitmask)) {
-		u8 reg_bits[2] = {reg, 0};
-
-		err = mutex_lock_interruptible(&ab->access_mutex);
-		if (err)
-			return err;
-
-		if (bitmask == 0xFF) /* No need to read in this case. */
-			reg_bits[1] = bitvalues;
-		else { /* Read and modify the register value. */
-			u8 bits;
-
-			err = ab3550_i2c_master_send(ab, bank, &reg, 1);
-			if (err)
-				goto unlock_and_return;
-			err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
-			if (err)
-				goto unlock_and_return;
-			reg_bits[1] = ((~bitmask & bits) |
-				(bitmask & bitvalues));
-		}
-		/* Write the new value. */
-		err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
-unlock_and_return:
-		mutex_unlock(&ab->access_mutex);
-	}
-	return err;
-}
-
-/*
- * Read/write permission checking functions.
- */
-static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
-	u8 first_reg, u8 last_reg)
-{
-	u8 i;
-
-	if (last_reg < first_reg)
-		return false;
-
-	for (i = 0; i < ranges->count; i++) {
-		if (first_reg < ranges->range[i].first)
-			break;
-		if ((last_reg <= ranges->range[i].last) &&
-			(ranges->range[i].perm & AB3550_PERM_WR))
-			return true;
-	}
-	return false;
-}
-
-static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
-	return page_write_allowed(ranges, reg, reg);
-}
-
-static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
-	u8 first_reg, u8 last_reg)
-{
-	u8 i;
-
-	if (last_reg < first_reg)
-		return false;
-	/* Find the range (if it exists in the list) that includes first_reg. */
-	for (i = 0; i < ranges->count; i++) {
-		if (first_reg < ranges->range[i].first)
-			return false;
-		if (first_reg <= ranges->range[i].last)
-			break;
-	}
-	/* Make sure that the entire range up to and including last_reg is
-	 * readable. This may span several of the ranges in the list.
-	 */
-	while ((i < ranges->count) &&
-		(ranges->range[i].perm & AB3550_PERM_RD)) {
-		if (last_reg <= ranges->range[i].last)
-			return true;
-		if ((++i >= ranges->count) ||
-			(ranges->range[i].first !=
-			 (ranges->range[i - 1].last + 1))) {
-			break;
-		}
-	}
-	return false;
-}
-
-static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
-	return page_read_allowed(ranges, reg, reg);
-}
-
-/*
- * The register access functionality.
- */
-static int ab3550_get_chip_id(struct device *dev)
-{
-	struct ab3550 *ab = dev_get_drvdata(dev->parent);
-	return (int)ab->chip_id;
-}
-
-static int ab3550_mask_and_set_register_interruptible(struct device *dev,
-	u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return mask_and_set_register_interruptible(ab, bank, reg,
-		bitmask, bitvalues);
-}
-
-static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 value)
-{
-	return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
-		value);
-}
-
-static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 *value)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return get_register_interruptible(ab, bank, reg, value);
-}
-
-static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	struct ab3550 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB3550_NUM_BANKS <= bank) ||
-		!page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
-			first_reg, (first_reg + numregs - 1)))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return get_register_page_interruptible(ab, bank, first_reg, regvals,
-		numregs);
-}
-
-static int ab3550_event_registers_startup_state_get(struct device *dev,
-	u8 *event)
-{
-	struct ab3550 *ab;
-
-	ab = dev_get_drvdata(dev->parent);
-	if (!ab->startup_events_read)
-		return -EAGAIN; /* Try again later */
-
-	memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
-	return 0;
-}
-
-static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
-{
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	bool val;
-
-	ab = irq_get_chip_data(irq);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq -= plf_data->irq.base;
-	val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
-
-	return val;
-}
-
-static struct abx500_ops ab3550_ops = {
-	.get_chip_id = ab3550_get_chip_id,
-	.get_register = ab3550_get_register_interruptible,
-	.set_register = ab3550_set_register_interruptible,
-	.get_register_page = ab3550_get_register_page_interruptible,
-	.set_register_page = NULL,
-	.mask_and_set_register = ab3550_mask_and_set_register_interruptible,
-	.event_registers_startup_state_get =
-		ab3550_event_registers_startup_state_get,
-	.startup_irq_enabled = ab3550_startup_irq_enabled,
-};
-
-static irqreturn_t ab3550_irq_handler(int irq, void *data)
-{
-	struct ab3550 *ab = data;
-	int err;
-	unsigned int i;
-	u8 e[AB3550_NUM_EVENT_REG];
-	u8 *events;
-	unsigned long flags;
-
-	events = (ab->startup_events_read ? e : ab->startup_events);
-
-	err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
-		AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
-	if (err)
-		goto err_event_rd;
-
-	if (!ab->startup_events_read) {
-		dev_info(&ab->i2c_client[0]->dev,
-			"startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
-			ab->startup_events[0], ab->startup_events[1],
-			ab->startup_events[2], ab->startup_events[3],
-			ab->startup_events[4]);
-		ab->startup_events_read = true;
-		goto out;
-	}
-
-	/* The two highest bits in event[4] are not used. */
-	events[4] &= 0x3f;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
-		events[i] &= ~ab->event_mask[i];
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
-		u8 bit;
-		u8 event_reg;
-
-		dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
-			i, events[i]);
-
-		event_reg = events[i];
-		for (bit = 0; event_reg; bit++, event_reg /= 2) {
-			if (event_reg % 2) {
-				unsigned int irq;
-				struct ab3550_platform_data *plf_data;
-
-				plf_data = ab->i2c_client[0]->dev.platform_data;
-				irq = plf_data->irq.base + (i * 8) + bit;
-				handle_nested_irq(irq);
-			}
-		}
-	}
-out:
-	return IRQ_HANDLED;
-
-err_event_rd:
-	dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
-	{
-		.count = 6,
-		.range = (struct ab3550_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0e,
-			},
-			{
-				.first = 0x10,
-				.last = 0x1a,
-			},
-			{
-				.first = 0x1e,
-				.last = 0x4f,
-			},
-			{
-				.first = 0x51,
-				.last = 0x63,
-			},
-			{
-				.first = 0x65,
-				.last = 0xa3,
-			},
-			{
-				.first = 0xa5,
-				.last = 0xa8,
-			},
-		}
-	},
-	{
-		.count = 8,
-		.range = (struct ab3550_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0e,
-			},
-			{
-				.first = 0x10,
-				.last = 0x17,
-			},
-			{
-				.first = 0x1a,
-				.last = 0x1c,
-			},
-			{
-				.first = 0x20,
-				.last = 0x56,
-			},
-			{
-				.first = 0x5a,
-				.last = 0x88,
-			},
-			{
-				.first = 0x8a,
-				.last = 0xad,
-			},
-			{
-				.first = 0xb0,
-				.last = 0xba,
-			},
-			{
-				.first = 0xbc,
-				.last = 0xc3,
-			},
-		}
-	},
-};
-
-static int ab3550_registers_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-	int bank;
-
-	seq_printf(s, AB3550_NAME_STRING " register values:\n");
-
-	for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
-		unsigned int i;
-
-		seq_printf(s, " bank %d:\n", bank);
-		for (i = 0; i < debug_ranges[bank].count; i++) {
-			u8 reg;
-
-			for (reg = debug_ranges[bank].range[i].first;
-				reg <= debug_ranges[bank].range[i].last;
-				reg++) {
-				u8 value;
-
-				get_register_interruptible(ab, bank, reg,
-					&value);
-				seq_printf(s, "  [%d/0x%02X]: 0x%02X\n", bank,
-					reg, value);
-			}
-		}
-	}
-	return 0;
-}
-
-static int ab3550_registers_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab3550_registers_fops = {
-	.open = ab3550_registers_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab3550_bank_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-
-	seq_printf(s, "%d\n", ab->debug_bank);
-	return 0;
-}
-
-static int ab3550_bank_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_bank_print, inode->i_private);
-}
-
-static ssize_t ab3550_bank_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_bank;
-	int err;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
-	if (err)
-		return err;
-
-	if (user_bank >= AB3550_NUM_BANKS) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > number of banks\n");
-		return -EINVAL;
-	}
-
-	ab->debug_bank = user_bank;
-
-	return count;
-}
-
-static int ab3550_address_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-
-	seq_printf(s, "0x%02X\n", ab->debug_address);
-	return 0;
-}
-
-static int ab3550_address_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_address_print, inode->i_private);
-}
-
-static ssize_t ab3550_address_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_address;
-	int err;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_address);
-	if (err)
-		return err;
-
-	if (user_address > 0xff) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	ab->debug_address = user_address;
-	return count;
-}
-
-static int ab3550_val_print(struct seq_file *s, void *p)
-{
-	struct ab3550 *ab = s->private;
-	int err;
-	u8 regvalue;
-
-	err = get_register_interruptible(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err)
-		return -EINVAL;
-	seq_printf(s, "0x%02X\n", regvalue);
-
-	return 0;
-}
-
-static int ab3550_val_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab3550_val_print, inode->i_private);
-}
-
-static ssize_t ab3550_val_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_val;
-	int err;
-	u8 regvalue;
-
-	/* Get userspace string and assure termination */
-	err = kstrtoul_from_user(user_buf, count, 0, &user_val);
-	if (err)
-		return err;
-
-	if (user_val > 0xff) {
-		dev_err(&ab->i2c_client[0]->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	err = mask_and_set_register_interruptible(
-		ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, 0xFF, (u8)user_val);
-	if (err)
-		return -EINVAL;
-
-	get_register_interruptible(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err)
-		return -EINVAL;
-
-	return count;
-}
-
-static const struct file_operations ab3550_bank_fops = {
-	.open = ab3550_bank_open,
-	.write = ab3550_bank_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_address_fops = {
-	.open = ab3550_address_open,
-	.write = ab3550_address_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_val_fops = {
-	.open = ab3550_val_open,
-	.write = ab3550_val_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static struct dentry *ab3550_dir;
-static struct dentry *ab3550_reg_file;
-static struct dentry *ab3550_bank_file;
-static struct dentry *ab3550_address_file;
-static struct dentry *ab3550_val_file;
-
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-	ab->debug_bank = 0;
-	ab->debug_address = 0x00;
-
-	ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
-	if (!ab3550_dir)
-		goto exit_no_debugfs;
-
-	ab3550_reg_file = debugfs_create_file("all-registers",
-		S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
-	if (!ab3550_reg_file)
-		goto exit_destroy_dir;
-
-	ab3550_bank_file = debugfs_create_file("register-bank",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_bank_fops);
-	if (!ab3550_bank_file)
-		goto exit_destroy_reg;
-
-	ab3550_address_file = debugfs_create_file("register-address",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_address_fops);
-	if (!ab3550_address_file)
-		goto exit_destroy_bank;
-
-	ab3550_val_file = debugfs_create_file("register-value",
-		(S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_val_fops);
-	if (!ab3550_val_file)
-		goto exit_destroy_address;
-
-	return;
-
-exit_destroy_address:
-	debugfs_remove(ab3550_address_file);
-exit_destroy_bank:
-	debugfs_remove(ab3550_bank_file);
-exit_destroy_reg:
-	debugfs_remove(ab3550_reg_file);
-exit_destroy_dir:
-	debugfs_remove(ab3550_dir);
-exit_no_debugfs:
-	dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
-	return;
-}
-
-static inline void ab3550_remove_debugfs(void)
-{
-	debugfs_remove(ab3550_val_file);
-	debugfs_remove(ab3550_address_file);
-	debugfs_remove(ab3550_bank_file);
-	debugfs_remove(ab3550_reg_file);
-	debugfs_remove(ab3550_dir);
-}
-
-#else /* !CONFIG_DEBUG_FS */
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-}
-static inline void ab3550_remove_debugfs(void)
-{
-}
-#endif
-
-/*
- * Basic set-up, datastructure creation/destruction and I2C interface.
- * This sets up a default config in the AB3550 chip so that it
- * will work as expected.
- */
-static int __init ab3550_setup(struct ab3550 *ab)
-{
-	int err = 0;
-	int i;
-	struct ab3550_platform_data *plf_data;
-	struct abx500_init_settings *settings;
-
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	settings = plf_data->init_settings;
-
-	for (i = 0; i < plf_data->init_settings_sz; i++) {
-		err = mask_and_set_register_interruptible(ab,
-			settings[i].bank,
-			settings[i].reg,
-			0xFF, settings[i].setting);
-		if (err)
-			goto exit_no_setup;
-
-		/* If event mask register update the event mask in ab3550 */
-		if ((settings[i].bank == 0) &&
-			(AB3550_IMR1 <= settings[i].reg) &&
-			(settings[i].reg <= AB3550_IMR5)) {
-			ab->event_mask[settings[i].reg - AB3550_IMR1] =
-				settings[i].setting;
-		}
-	}
-exit_no_setup:
-	return err;
-}
-
-static void ab3550_mask_work(struct work_struct *work)
-{
-	struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
-	int i;
-	unsigned long flags;
-	u8 mask[AB3550_NUM_EVENT_REG];
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
-		mask[i] = ab->event_mask[i];
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
-		int err;
-
-		err = mask_and_set_register_interruptible(ab, 0,
-			(AB3550_IMR1 + i), ~0, mask[i]);
-		if (err)
-			dev_err(&ab->i2c_client[0]->dev,
-				"ab3550_mask_work failed 0x%x,0x%x\n",
-				(AB3550_IMR1 + i), mask[i]);
-	}
-}
-
-static void ab3550_mask(struct irq_data *data)
-{
-	unsigned long flags;
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	int irq;
-
-	ab = irq_data_get_irq_chip_data(data);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq = data->irq - plf_data->irq.base;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	ab->event_mask[irq / 8] |= BIT(irq % 8);
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	schedule_work(&ab->mask_work);
-}
-
-static void ab3550_unmask(struct irq_data *data)
-{
-	unsigned long flags;
-	struct ab3550 *ab;
-	struct ab3550_platform_data *plf_data;
-	int irq;
-
-	ab = irq_data_get_irq_chip_data(data);
-	plf_data = ab->i2c_client[0]->dev.platform_data;
-	irq = data->irq - plf_data->irq.base;
-
-	spin_lock_irqsave(&ab->event_lock, flags);
-	ab->event_mask[irq / 8] &= ~BIT(irq % 8);
-	spin_unlock_irqrestore(&ab->event_lock, flags);
-
-	schedule_work(&ab->mask_work);
-}
-
-static void noop(struct irq_data *data)
-{
-}
-
-static struct irq_chip ab3550_irq_chip = {
-	.name		= "ab3550-core", /* Keep the same name as the request */
-	.irq_disable	= ab3550_mask, /* No default to mask in chip.c */
-	.irq_ack	= noop,
-	.irq_mask	= ab3550_mask,
-	.irq_unmask	= ab3550_unmask,
-};
-
-struct ab_family_id {
-	u8	id;
-	char	*name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
-	/* AB3550 */
-	{
-		.id = AB3550_P1A,
-		.name = "P1A"
-	},
-	/* Terminator */
-	{
-		.id = 0x00,
-	}
-};
-
-static int __init ab3550_probe(struct i2c_client *client,
-	const struct i2c_device_id *id)
-{
-	struct ab3550 *ab;
-	struct ab3550_platform_data *ab3550_plf_data =
-		client->dev.platform_data;
-	int err;
-	int i;
-	int num_i2c_clients = 0;
-
-	ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
-	if (!ab) {
-		dev_err(&client->dev,
-			"could not allocate " AB3550_NAME_STRING " device\n");
-		return -ENOMEM;
-	}
-
-	/* Initialize data structure */
-	mutex_init(&ab->access_mutex);
-	spin_lock_init(&ab->event_lock);
-	ab->i2c_client[0] = client;
-
-	i2c_set_clientdata(client, ab);
-
-	/* Read chip ID register */
-	err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
-	if (err) {
-		dev_err(&client->dev, "could not communicate with the analog "
-			"baseband chip\n");
-		goto exit_no_detect;
-	}
-
-	for (i = 0; ids[i].id != 0x0; i++) {
-		if (ids[i].id == ab->chip_id) {
-			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
-				AB3550_ID_FORMAT_STRING, ids[i].name);
-			break;
-		}
-	}
-
-	if (ids[i].id == 0x0) {
-		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
-			ab->chip_id);
-		dev_err(&client->dev, "driver not started!\n");
-		goto exit_no_detect;
-	}
-
-	dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
-
-	/* Attach other dummy I2C clients. */
-	while (++num_i2c_clients < AB3550_NUM_BANKS) {
-		ab->i2c_client[num_i2c_clients] =
-			i2c_new_dummy(client->adapter,
-				(client->addr + num_i2c_clients));
-		if (!ab->i2c_client[num_i2c_clients]) {
-			err = -ENOMEM;
-			goto exit_no_dummy_client;
-		}
-		strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
-			sizeof(ab->i2c_client[num_i2c_clients]->name));
-	}
-
-	err = ab3550_setup(ab);
-	if (err)
-		goto exit_no_setup;
-
-	INIT_WORK(&ab->mask_work, ab3550_mask_work);
-
-	for (i = 0; i < ab3550_plf_data->irq.count; i++) {
-		unsigned int irq;
-
-		irq = ab3550_plf_data->irq.base + i;
-		irq_set_chip_data(irq, ab);
-		irq_set_chip_and_handler(irq, &ab3550_irq_chip,
-					 handle_simple_irq);
-		irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		irq_set_noprobe(irq);
-#endif
-	}
-
-	err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
-		IRQF_ONESHOT, "ab3550-core", ab);
-	/* This real unpredictable IRQ is of course sampled for entropy */
-	rand_initialize_irq(client->irq);
-
-	if (err)
-		goto exit_no_irq;
-
-	err = abx500_register_ops(&client->dev, &ab3550_ops);
-	if (err)
-		goto exit_no_ops;
-
-	/* Set up and register the platform devices. */
-	for (i = 0; i < AB3550_NUM_DEVICES; i++) {
-		ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
-		ab3550_devs[i].pdata_size = ab3550_plf_data->dev_data_sz[i];
-	}
-
-	err = mfd_add_devices(&client->dev, 0, ab3550_devs,
-		ARRAY_SIZE(ab3550_devs), NULL,
-		ab3550_plf_data->irq.base);
-
-	ab3550_setup_debugfs(ab);
-
-	return 0;
-
-exit_no_ops:
-exit_no_irq:
-exit_no_setup:
-exit_no_dummy_client:
-	/* Unregister the dummy i2c clients. */
-	while (--num_i2c_clients)
-		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-exit_no_detect:
-	kfree(ab);
-	return err;
-}
-
-static int __exit ab3550_remove(struct i2c_client *client)
-{
-	struct ab3550 *ab = i2c_get_clientdata(client);
-	int num_i2c_clients = AB3550_NUM_BANKS;
-
-	mfd_remove_devices(&client->dev);
-	ab3550_remove_debugfs();
-
-	while (--num_i2c_clients)
-		i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-
-	/*
-	 * At this point, all subscribers should have unregistered
-	 * their notifiers so deactivate IRQ
-	 */
-	free_irq(client->irq, ab);
-	kfree(ab);
-	return 0;
-}
-
-static const struct i2c_device_id ab3550_id[] = {
-	{AB3550_NAME_STRING, 0},
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, ab3550_id);
-
-static struct i2c_driver ab3550_driver = {
-	.driver = {
-		.name	= AB3550_NAME_STRING,
-		.owner	= THIS_MODULE,
-	},
-	.id_table	= ab3550_id,
-	.probe		= ab3550_probe,
-	.remove		= __exit_p(ab3550_remove),
-};
-
-static int __init ab3550_i2c_init(void)
-{
-	return i2c_add_driver(&ab3550_driver);
-}
-
-static void __exit ab3550_i2c_exit(void)
-{
-	i2c_del_driver(&ab3550_driver);
-}
-
-subsys_initcall(ab3550_i2c_init);
-module_exit(ab3550_i2c_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3550 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
new file mode 100644
index 0000000..ec10629
--- /dev/null
+++ b/drivers/mfd/ab5500-core.c
@@ -0,0 +1,1440 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB5500 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Karl Komierowski  <karl.komierowski@stericsson.com>
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ *
+ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/version.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+#define AB5500_NUM_EVENT_REG 23
+#define AB5500_IT_LATCH0_REG 0x40
+#define AB5500_IT_MASK0_REG 0x60
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used).  Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
+	[AB5500_DEVID_USB] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_USB,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x01,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x80,
+						.last = 0x83,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x87,
+						.last = 0x8A,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x8B,
+						.last = 0x8B,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x91,
+						.last = 0x92,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x93,
+						.last = 0x93,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x94,
+						.last = 0x94,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xA8,
+						.last = 0xB0,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xB2,
+						.last = 0xB2,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xB4,
+						.last = 0xBC,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xBF,
+						.last = 0xBF,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0xC1,
+						.last = 0xC5,
+						.perm = AB5500_PERM_RO,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_ADC] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_ADC,
+				.nranges = 6,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x1F,
+						.last = 0x22,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x23,
+						.last = 0x24,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x26,
+						.last = 0x2D,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x2F,
+						.last = 0x34,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x37,
+						.last = 0x57,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x58,
+						.last = 0x58,
+						.perm = AB5500_PERM_RO,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_LEDS] =  {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_LED,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x0C,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_VIDEO] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_VDENC,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x08,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x09,
+						.last = 0x09,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x0A,
+						.last = 0x12,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x15,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x1B,
+						.last = 0x21,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x27,
+						.last = 0x2C,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x41,
+						.last = 0x41,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x45,
+						.last = 0x5B,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x5D,
+						.last = 0x5D,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x69,
+						.last = 0x69,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x6C,
+						.last = 0x6D,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x80,
+						.last = 0x81,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_REGULATORS] =   {
+		.nbanks = 2,
+		.bank =  (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_STARTUP,
+				.nranges = 12,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x1F,
+						.last = 0x1F,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x2E,
+						.last = 0x2E,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x2F,
+						.last = 0x30,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x50,
+						.last = 0x51,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x60,
+						.last = 0x61,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x66,
+						.last = 0x8A,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x8C,
+						.last = 0x96,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xAA,
+						.last = 0xB4,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xB7,
+						.last = 0xBF,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xC1,
+						.last = 0xCA,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xD3,
+						.last = 0xE0,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+			{
+				.bankid = AB5500_BANK_SIM_USBSIM,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x13,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_SIM] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_SIM_USBSIM,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x13,
+						.last = 0x19,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_RTC] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_RTC,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x04,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0x06,
+						.last = 0x0C,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_CHARGER] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_CHG,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x11,
+						.last = 0x11,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x12,
+						.last = 0x1B,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_FUELGAUGE] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_FG_BATTCOM_ACC,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x0B,
+						.perm = AB5500_PERM_RO,
+					},
+					{
+						.first = 0x0C,
+						.last = 0x10,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_VIBRATOR] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_VIBRA,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x10,
+						.last = 0x13,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xFE,
+						.last = 0xFE,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_CODEC] =   {
+		.nbanks = 1,
+		.bank = (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+				.nranges = 2,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x00,
+						.last = 0x48,
+						.perm = AB5500_PERM_RW,
+					},
+					{
+						.first = 0xEB,
+						.last = 0xFB,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+	[AB5500_DEVID_POWER] = {
+		.nbanks	= 2,
+		.bank	= (struct ab5500_i2c_ranges []) {
+			{
+				.bankid = AB5500_BANK_STARTUP,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x30,
+						.last = 0x30,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+			{
+				.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+				.nranges = 1,
+				.range = (struct ab5500_reg_range[]) {
+					{
+						.first = 0x01,
+						.last = 0x01,
+						.perm = AB5500_PERM_RW,
+					},
+				},
+			},
+		},
+	},
+};
+
+#define AB5500_IRQ(bank, bit)	((bank) * 8 + (bit))
+
+/* I appologize for the resource names beeing a mix of upper case
+ * and lower case but I want them to be exact as the documentation */
+static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
+	[AB5500_DEVID_LEDS] = {
+		.name = "ab5500-leds",
+		.id = AB5500_DEVID_LEDS,
+	},
+	[AB5500_DEVID_POWER] = {
+		.name = "ab5500-power",
+		.id = AB5500_DEVID_POWER,
+	},
+	[AB5500_DEVID_REGULATORS] = {
+		.name = "ab5500-regulator",
+		.id = AB5500_DEVID_REGULATORS,
+	},
+	[AB5500_DEVID_SIM] = {
+		.name = "ab5500-sim",
+		.id = AB5500_DEVID_SIM,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name = "SIMOFF",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(2, 0), /*rising*/
+				.end = AB5500_IRQ(2, 1), /*falling*/
+			},
+		},
+	},
+	[AB5500_DEVID_RTC] = {
+		.name = "ab5500-rtc",
+		.id = AB5500_DEVID_RTC,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name	= "RTC_Alarm",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 7),
+				.end	= AB5500_IRQ(1, 7),
+			}
+		},
+	},
+	[AB5500_DEVID_CHARGER] = {
+		.name = "ab5500-charger",
+		.id = AB5500_DEVID_CHARGER,
+	},
+	[AB5500_DEVID_ADC] = {
+		.name = "ab5500-adc",
+		.id = AB5500_DEVID_ADC,
+		.num_resources = 10,
+		.resources = (struct resource[]) {
+			{
+				.name = "TRIGGER-0",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 0),
+				.end = AB5500_IRQ(0, 0),
+			},
+			{
+				.name = "TRIGGER-1",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 1),
+				.end = AB5500_IRQ(0, 1),
+			},
+			{
+				.name = "TRIGGER-2",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 2),
+				.end = AB5500_IRQ(0, 2),
+			},
+			{
+				.name = "TRIGGER-3",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 3),
+				.end = AB5500_IRQ(0, 3),
+			},
+			{
+				.name = "TRIGGER-4",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 4),
+				.end = AB5500_IRQ(0, 4),
+			},
+			{
+				.name = "TRIGGER-5",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 5),
+				.end = AB5500_IRQ(0, 5),
+			},
+			{
+				.name = "TRIGGER-6",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 6),
+				.end = AB5500_IRQ(0, 6),
+			},
+			{
+				.name = "TRIGGER-7",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 7),
+				.end = AB5500_IRQ(0, 7),
+			},
+			{
+				.name = "TRIGGER-VBAT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 8),
+				.end = AB5500_IRQ(0, 8),
+			},
+			{
+				.name = "TRIGGER-VBAT-TXON",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(0, 9),
+				.end = AB5500_IRQ(0, 9),
+			},
+		},
+	},
+	[AB5500_DEVID_FUELGAUGE] = {
+		.name = "ab5500-fuelgauge",
+		.id = AB5500_DEVID_FUELGAUGE,
+		.num_resources = 6,
+		.resources = (struct resource[]) {
+			{
+				.name = "Batt_attach",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 5),
+				.end = AB5500_IRQ(7, 5),
+			},
+			{
+				.name = "Batt_removal",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 6),
+				.end = AB5500_IRQ(7, 6),
+			},
+			{
+				.name = "UART_framing",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(7, 7),
+				.end = AB5500_IRQ(7, 7),
+			},
+			{
+				.name = "UART_overrun",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 0),
+				.end = AB5500_IRQ(8, 0),
+			},
+			{
+				.name = "UART_Rdy_RX",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 1),
+				.end = AB5500_IRQ(8, 1),
+			},
+			{
+				.name = "UART_Rdy_TX",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 2),
+				.end = AB5500_IRQ(8, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_VIBRATOR] = {
+		.name = "ab5500-vibrator",
+		.id = AB5500_DEVID_VIBRATOR,
+	},
+	[AB5500_DEVID_CODEC] = {
+		.name = "ab5500-codec",
+		.id = AB5500_DEVID_CODEC,
+		.num_resources = 3,
+		.resources = (struct resource[]) {
+			{
+				.name = "audio_spkr1_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 5),
+				.end = AB5500_IRQ(9, 5),
+			},
+			{
+				.name = "audio_plllocked",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 6),
+				.end = AB5500_IRQ(9, 6),
+			},
+			{
+				.name = "audio_spkr2_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 4),
+				.end = AB5500_IRQ(17, 4),
+			},
+		},
+	},
+	[AB5500_DEVID_USB] = {
+		.name = "ab5500-usb",
+		.id = AB5500_DEVID_USB,
+		.num_resources = 36,
+		.resources = (struct resource[]) {
+			{
+				.name = "Link_Update",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(22, 1),
+				.end = AB5500_IRQ(22, 1),
+			},
+			{
+				.name = "DCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 3),
+				.end = AB5500_IRQ(8, 4),
+			},
+			{
+				.name = "VBUS_R",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 5),
+				.end = AB5500_IRQ(8, 5),
+			},
+			{
+				.name = "VBUS_F",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 6),
+				.end = AB5500_IRQ(8, 6),
+			},
+			{
+				.name = "CHGstate_10_PCVBUSchg",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(8, 7),
+				.end = AB5500_IRQ(8, 7),
+			},
+			{
+				.name = "DCIOreverse_ovc",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 0),
+				.end = AB5500_IRQ(9, 0),
+			},
+			{
+				.name = "USBCharDetDone",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 1),
+				.end = AB5500_IRQ(9, 1),
+			},
+			{
+				.name = "DCIO_no_limit",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 2),
+				.end = AB5500_IRQ(9, 2),
+			},
+			{
+				.name = "USB_suspend",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 3),
+				.end = AB5500_IRQ(9, 3),
+			},
+			{
+				.name = "DCIOreverse_fwdcurrent",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 4),
+				.end = AB5500_IRQ(9, 4),
+			},
+			{
+				.name = "Vbus_Imeasmax_change",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(9, 5),
+				.end = AB5500_IRQ(9, 6),
+			},
+			{
+				.name = "OVV",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 5),
+				.end = AB5500_IRQ(14, 5),
+			},
+			{
+				.name = "USBcharging_NOTok",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 3),
+				.end = AB5500_IRQ(15, 3),
+			},
+			{
+				.name = "usb_adp_sensoroff",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 6),
+				.end = AB5500_IRQ(15, 6),
+			},
+			{
+				.name = "usb_adp_probeplug",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 7),
+				.end = AB5500_IRQ(15, 7),
+			},
+			{
+				.name = "usb_adp_sinkerror",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 0),
+				.end = AB5500_IRQ(16, 6),
+			},
+			{
+				.name = "usb_adp_sourceerror",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 1),
+				.end = AB5500_IRQ(16, 1),
+			},
+			{
+				.name = "usb_idgnd_r",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 2),
+				.end = AB5500_IRQ(16, 2),
+			},
+			{
+				.name = "usb_idgnd_f",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 3),
+				.end = AB5500_IRQ(16, 3),
+			},
+			{
+				.name = "usb_iddetR1",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 4),
+				.end = AB5500_IRQ(16, 5),
+			},
+			{
+				.name = "usb_iddetR2",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(16, 6),
+				.end = AB5500_IRQ(16, 7),
+			},
+			{
+				.name = "usb_iddetR3",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 0),
+				.end = AB5500_IRQ(17, 1),
+			},
+			{
+				.name = "usb_iddetR4",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 2),
+				.end = AB5500_IRQ(17, 3),
+			},
+			{
+				.name = "CharTempWindowOk",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(17, 7),
+				.end = AB5500_IRQ(18, 0),
+			},
+			{
+				.name = "USB_SprDetect",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 1),
+				.end = AB5500_IRQ(18, 1),
+			},
+			{
+				.name = "usb_adp_probe_unplug",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 2),
+				.end = AB5500_IRQ(18, 2),
+			},
+			{
+				.name = "VBUSChDrop",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 3),
+				.end = AB5500_IRQ(18, 4),
+			},
+			{
+				.name = "dcio_char_rec_done",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 5),
+				.end = AB5500_IRQ(18, 5),
+			},
+			{
+				.name = "Charging_stopped_by_temp",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(18, 6),
+				.end = AB5500_IRQ(18, 6),
+			},
+			{
+				.name = "CHGstate_11_SafeModeVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 1),
+				.end = AB5500_IRQ(21, 2),
+			},
+			{
+				.name = "CHGstate_12_comletedVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 2),
+				.end = AB5500_IRQ(21, 2),
+			},
+			{
+				.name = "CHGstate_13_completedVBUS",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 3),
+				.end = AB5500_IRQ(21, 3),
+			},
+			{
+				.name = "CHGstate_14_FullChgDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 4),
+				.end = AB5500_IRQ(21, 4),
+			},
+			{
+				.name = "CHGstate_15_SafeModeDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 5),
+				.end = AB5500_IRQ(21, 5),
+			},
+			{
+				.name = "CHGstate_16_OFFsuspendDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 6),
+				.end = AB5500_IRQ(21, 6),
+			},
+			{
+				.name = "CHGstate_17_completedDCIO",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(21, 7),
+				.end = AB5500_IRQ(21, 7),
+			},
+		},
+	},
+	[AB5500_DEVID_OTP] = {
+		.name = "ab5500-otp",
+		.id = AB5500_DEVID_OTP,
+	},
+	[AB5500_DEVID_VIDEO] = {
+		.name = "ab5500-video",
+		.id = AB5500_DEVID_VIDEO,
+		.num_resources = 1,
+		.resources = (struct resource[]) {
+			{
+				.name = "plugTVdet",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(22, 2),
+				.end = AB5500_IRQ(22, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_DBIECI] = {
+		.name = "ab5500-dbieci",
+		.id = AB5500_DEVID_DBIECI,
+		.num_resources = 10,
+		.resources = (struct resource[]) {
+			{
+				.name = "COLL",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 0),
+				.end = AB5500_IRQ(14, 0),
+			},
+			{
+				.name = "RESERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 1),
+				.end = AB5500_IRQ(14, 1),
+			},
+			{
+				.name = "FRAERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 2),
+				.end = AB5500_IRQ(14, 2),
+			},
+			{
+				.name = "COMERR",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 3),
+				.end = AB5500_IRQ(14, 3),
+			},
+			{
+				.name = "BSI_indicator",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 4),
+				.end = AB5500_IRQ(14, 4),
+			},
+			{
+				.name = "SPDSET",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 6),
+				.end = AB5500_IRQ(14, 6),
+			},
+			{
+				.name = "DSENT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(14, 7),
+				.end = AB5500_IRQ(14, 7),
+			},
+			{
+				.name = "DREC",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 0),
+				.end = AB5500_IRQ(15, 0),
+			},
+			{
+				.name = "ACCINT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 1),
+				.end = AB5500_IRQ(15, 1),
+			},
+			{
+				.name = "NOPINT",
+				.flags = IORESOURCE_IRQ,
+				.start = AB5500_IRQ(15, 2),
+				.end = AB5500_IRQ(15, 2),
+			},
+		},
+	},
+	[AB5500_DEVID_ONSWA] = {
+		.name = "ab5500-onswa",
+		.id = AB5500_DEVID_ONSWA,
+		.num_resources = 2,
+		.resources = (struct resource[]) {
+			{
+				.name	= "ONSWAn_rising",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 3),
+				.end	= AB5500_IRQ(1, 3),
+			},
+			{
+				.name	= "ONSWAn_falling",
+				.flags	= IORESOURCE_IRQ,
+				.start	= AB5500_IRQ(1, 4),
+				.end	= AB5500_IRQ(1, 4),
+			},
+		},
+	},
+};
+
+/*
+ * Functionality for getting/setting register values.
+ */
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
+					  u8 bank, u8 reg,
+					  u8 *value)
+{
+	int err;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+	err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
+
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs)
+{
+	int err;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	err = mutex_lock_interruptible(&ab->access_mutex);
+	if (err)
+		return err;
+
+	while (numregs) {
+		/* The hardware limit for get page is 4 */
+		u8 curnum = min_t(u8, numregs, 4u);
+
+		err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+					    first_reg, regvals, curnum);
+		if (err)
+			goto out;
+
+		numregs -= curnum;
+		first_reg += curnum;
+		regvals += curnum;
+	}
+
+out:
+	mutex_unlock(&ab->access_mutex);
+	return err;
+}
+
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues)
+{
+	int err = 0;
+
+	if (bank >= AB5500_NUM_BANKS)
+		return -EINVAL;
+
+	if (bitmask) {
+		u8 buf;
+
+		err = mutex_lock_interruptible(&ab->access_mutex);
+		if (err)
+			return err;
+
+		if (bitmask == 0xFF) /* No need to read in this case. */
+			buf = bitvalues;
+		else { /* Read and modify the register value. */
+			err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+				reg, &buf, 1);
+			if (err)
+				return err;
+
+			buf = ((~bitmask & buf) | (bitmask & bitvalues));
+		}
+		/* Write the new value. */
+		err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
+					     &buf, 1);
+
+		mutex_unlock(&ab->access_mutex);
+	}
+	return err;
+}
+
+static int
+set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
+{
+	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+							      0xff, value);
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
+{
+	u8 i;
+
+	if (devid < AB5500_NUM_DEVICES) {
+		for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
+			if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
+				return &ab5500_bank_ranges[devid].bank[i];
+		}
+	}
+	return NULL;
+}
+
+static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+	u8 i; /* range loop index */
+	const struct ab5500_i2c_ranges *bankref;
+
+	bankref = get_bankref(devid, bank);
+	if (bankref == NULL || last_reg < first_reg)
+		return false;
+
+	for (i = 0; i < bankref->nranges; i++) {
+		if (first_reg < bankref->range[i].first)
+			break;
+		if ((last_reg <= bankref->range[i].last) &&
+			(bankref->range[i].perm & AB5500_PERM_WR))
+			return true;
+	}
+	return false;
+}
+
+static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
+{
+	return page_write_allowed(devid, bank, reg, reg);
+}
+
+static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+	u8 i;
+	const struct ab5500_i2c_ranges *bankref;
+
+	bankref = get_bankref(devid, bank);
+	if (bankref == NULL || last_reg < first_reg)
+		return false;
+
+
+	/* Find the range (if it exists in the list) that includes first_reg. */
+	for (i = 0; i < bankref->nranges; i++) {
+		if (first_reg < bankref->range[i].first)
+			return false;
+		if (first_reg <= bankref->range[i].last)
+			break;
+	}
+	/* Make sure that the entire range up to and including last_reg is
+	 * readable. This may span several of the ranges in the list.
+	 */
+	while ((i < bankref->nranges) &&
+		(bankref->range[i].perm & AB5500_PERM_RD)) {
+		if (last_reg <= bankref->range[i].last)
+			return true;
+		if ((++i >= bankref->nranges) ||
+			(bankref->range[i].first !=
+				(bankref->range[i - 1].last + 1))) {
+			break;
+		}
+	}
+	return false;
+}
+
+static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
+{
+	return page_read_allowed(devid, bank, reg, reg);
+}
+
+
+/*
+ * The exported register access functionality.
+ */
+static int ab5500_get_chip_id(struct device *dev)
+{
+	struct ab5500 *ab = dev_get_drvdata(dev->parent);
+
+	return (int)ab->chip_id;
+}
+
+static int ab5500_mask_and_set_register_interruptible(struct device *dev,
+		u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!reg_write_allowed(pdev->id, bank, reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+		bitmask, bitvalues);
+}
+
+static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 value)
+{
+	return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+		value);
+}
+
+static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
+		u8 reg, u8 *value)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!reg_read_allowed(pdev->id, bank, reg))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
+}
+
+static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
+		u8 first_reg, u8 *regvals, u8 numregs)
+{
+	struct ab5500 *ab;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if ((AB5500_NUM_BANKS <= bank) ||
+		!page_read_allowed(pdev->id, bank,
+			first_reg, (first_reg + numregs - 1)))
+		return -EINVAL;
+
+	ab = dev_get_drvdata(dev->parent);
+	return get_register_page_interruptible(ab, bank, first_reg, regvals,
+		numregs);
+}
+
+static int
+ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+	struct ab5500 *ab;
+
+	ab = dev_get_drvdata(dev->parent);
+	if (!ab->startup_events_read)
+		return -EAGAIN; /* Try again later */
+
+	memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
+	return 0;
+}
+
+static struct abx500_ops ab5500_ops = {
+	.get_chip_id = ab5500_get_chip_id,
+	.get_register = ab5500_get_register_interruptible,
+	.set_register = ab5500_set_register_interruptible,
+	.get_register_page = ab5500_get_register_page_interruptible,
+	.set_register_page = NULL,
+	.mask_and_set_register = ab5500_mask_and_set_register_interruptible,
+	.event_registers_startup_state_get =
+		ab5500_event_registers_startup_state_get,
+	.startup_irq_enabled = NULL,
+};
+
+/*
+ * ab5500_setup : Basic set-up, datastructure creation/destruction
+ *		  and I2C interface.This sets up a default config
+ *		  in the AB5500 chip so that it will work as expected.
+ * @ab :	  Pointer to ab5500 structure
+ * @settings :    Pointer to struct abx500_init_settings
+ * @size :        Size of init data
+ */
+static int __init ab5500_setup(struct ab5500 *ab,
+	struct abx500_init_settings *settings, unsigned int size)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		err = ab5500_mask_and_set_register_interruptible_raw(ab,
+			settings[i].bank,
+			settings[i].reg,
+			0xFF, settings[i].setting);
+		if (err)
+			goto exit_no_setup;
+
+		/* If event mask register update the event mask in ab5500 */
+		if ((settings[i].bank == AB5500_BANK_IT) &&
+			(AB5500_MASK_BASE <= settings[i].reg) &&
+			(settings[i].reg <= AB5500_MASK_END)) {
+			ab->mask[settings[i].reg - AB5500_MASK_BASE] =
+				settings[i].setting;
+		}
+	}
+exit_no_setup:
+	return err;
+}
+
+struct ab_family_id {
+	u8	id;
+	char	*name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+	/* AB5500 */
+	{
+		.id = AB5500_1_0,
+		.name = "1.0"
+	},
+	{
+		.id = AB5500_1_1,
+		.name = "1.1"
+	},
+	/* Terminator */
+	{
+		.id = 0x00,
+	}
+};
+
+static int __init ab5500_probe(struct platform_device *pdev)
+{
+	struct ab5500 *ab;
+	struct ab5500_platform_data *ab5500_plf_data =
+		pdev->dev.platform_data;
+	int err;
+	int i;
+
+	ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
+	if (!ab) {
+		dev_err(&pdev->dev,
+			"could not allocate ab5500 device\n");
+		return -ENOMEM;
+	}
+
+	/* Initialize data structure */
+	mutex_init(&ab->access_mutex);
+	mutex_init(&ab->irq_lock);
+	ab->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, ab);
+
+	/* Read chip ID register */
+	err = ab5500_get_register_interruptible_raw(ab,
+					AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+					AB5500_CHIP_ID, &ab->chip_id);
+	if (err) {
+		dev_err(&pdev->dev, "could not communicate with the analog "
+			"baseband chip\n");
+		goto exit_no_detect;
+	}
+
+	for (i = 0; ids[i].id != 0x0; i++) {
+		if (ids[i].id == ab->chip_id) {
+			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+				"AB5500 %s", ids[i].name);
+			break;
+		}
+	}
+	if (ids[i].id == 0x0) {
+		dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
+			ab->chip_id);
+		dev_err(&pdev->dev, "driver not started!\n");
+		goto exit_no_detect;
+	}
+
+	/* Clear and mask all interrupts */
+	for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
+		u8 latchreg = AB5500_IT_LATCH0_REG + i;
+		u8 maskreg = AB5500_IT_MASK0_REG + i;
+		u8 val;
+
+		ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
+						      latchreg, &val);
+		set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
+		ab->mask[i] = ab->oldmask[i] = 0xff;
+	}
+
+	err = abx500_register_ops(&pdev->dev, &ab5500_ops);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_register ops error\n");
+		goto exit_no_detect;
+	}
+
+	/* Set up and register the platform devices. */
+	for (i = 0; i < AB5500_NUM_DEVICES; i++) {
+		ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
+		ab5500_devs[i].pdata_size =
+			sizeof(ab5500_plf_data->dev_data[i]);
+	}
+
+	err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
+		ARRAY_SIZE(ab5500_devs), NULL,
+		ab5500_plf_data->irq.base);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
+		goto exit_no_detect;
+	}
+
+	err = ab5500_setup(ab, ab5500_plf_data->init_settings,
+		ab5500_plf_data->init_settings_sz);
+	if (err) {
+		dev_err(&pdev->dev, "ab5500_setup error\n");
+		goto exit_no_detect;
+	}
+
+	ab5500_setup_debugfs(ab);
+
+	dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+	return 0;
+
+exit_no_detect:
+	kfree(ab);
+	return err;
+}
+
+static int __exit ab5500_remove(struct platform_device *pdev)
+{
+	struct ab5500 *ab = platform_get_drvdata(pdev);
+
+	ab5500_remove_debugfs();
+	mfd_remove_devices(&pdev->dev);
+	kfree(ab);
+	return 0;
+}
+
+static struct platform_driver ab5500_driver = {
+	.driver = {
+		.name = "ab5500-core",
+		.owner = THIS_MODULE,
+	},
+	.remove  = __exit_p(ab5500_remove),
+};
+
+static int __init ab5500_core_init(void)
+{
+	return platform_driver_probe(&ab5500_driver, ab5500_probe);
+}
+
+static void __exit ab5500_core_exit(void)
+{
+	platform_driver_unregister(&ab5500_driver);
+}
+
+subsys_initcall(ab5500_core_init);
+module_exit(ab5500_core_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB5500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
new file mode 100644
index 0000000..63b30b1
--- /dev/null
+++ b/drivers/mfd/ab5500-core.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Shared definitions and data structures for the AB5500 MFD driver
+ */
+
+/* Read/write operation values. */
+#define AB5500_PERM_RD (0x01)
+#define AB5500_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB5500_PERM_RO (AB5500_PERM_RD)
+#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
+
+#define AB5500_MASK_BASE (0x60)
+#define AB5500_MASK_END (0x79)
+#define AB5500_CHIP_ID (0x20)
+
+/**
+ * struct ab5500_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab5500_reg_range {
+	u8 first;
+	u8 last;
+	u8 perm;
+};
+
+/**
+ * struct ab5500_i2c_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_ranges {
+	u8 nranges;
+	u8 bankid;
+	const struct ab5500_reg_range *range;
+};
+
+/**
+ * struct ab5500_i2c_banks
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_banks {
+	u8 nbanks;
+	const struct ab5500_i2c_ranges *bank;
+};
+
+/**
+ * struct ab5500_bank
+ * @slave_addr: I2C slave_addr found in AB5500 specification
+ * @name: Documentation name of the bank. For reference
+ */
+struct ab5500_bank {
+	u8 slave_addr;
+	const char *name;
+};
+
+static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
+	[AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+		AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
+	[AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+		AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
+	[AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
+	[AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
+	[AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
+	[AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
+	[AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
+	[AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
+	[AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
+	[AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
+	[AB5500_BANK_FG_BATTCOM_ACC] = {
+		AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
+	[AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
+	[AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
+	[AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
+	[AB5500_BANK_AUDIO_HEADSETUSB] = {
+		AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
+};
+
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
+	u8 *value);
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
new file mode 100644
index 0000000..43c0ebb
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -0,0 +1,807 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs support for the AB5500 MFD driver
+ */
+
+#include <linux/export.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/uaccess.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
+	[AB5500_BANK_LED] = {
+		.bankid = AB5500_BANK_LED,
+		.nranges = 1,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0C,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_ADC] = {
+		.bankid = AB5500_BANK_ADC,
+		.nranges = 6,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x1F,
+				.last = 0x22,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x23,
+				.last = 0x24,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x26,
+				.last = 0x2D,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x2F,
+				.last = 0x34,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x37,
+				.last = 0x57,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x58,
+				.last = 0x58,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_RTC] = {
+		.bankid = AB5500_BANK_RTC,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x04,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x06,
+				.last = 0x0C,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_STARTUP] = {
+		.bankid = AB5500_BANK_STARTUP,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1F,
+				.last = 0x1F,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x2E,
+				.last = 0x2E,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x2F,
+				.last = 0x30,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x51,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x61,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x66,
+				.last = 0x8A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x8C,
+				.last = 0x96,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xAA,
+				.last = 0xB4,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xB7,
+				.last = 0xBF,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xC1,
+				.last = 0xCA,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xD3,
+				.last = 0xE0,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_DBI_ECI] = {
+		.bankid = AB5500_BANK_DBI_ECI,
+		.nranges = 3,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x07,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x10,
+				.last = 0x10,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x13,
+				.last = 0x13,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_CHG] = {
+		.bankid = AB5500_BANK_CHG,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x11,
+				.last = 0x11,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x12,
+				.last = 0x1B,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_FG_BATTCOM_ACC] = {
+		.bankid = AB5500_BANK_FG_BATTCOM_ACC,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0B,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0C,
+				.last = 0x10,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_USB] = {
+		.bankid = AB5500_BANK_USB,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x80,
+				.last = 0x83,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x87,
+				.last = 0x8A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x8B,
+				.last = 0x8B,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x91,
+				.last = 0x92,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x93,
+				.last = 0x93,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x94,
+				.last = 0x94,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xA8,
+				.last = 0xB0,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xB2,
+				.last = 0xB2,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xB4,
+				.last = 0xBC,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xBF,
+				.last = 0xBF,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0xC1,
+				.last = 0xC5,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_IT] = {
+		.bankid = AB5500_BANK_IT,
+		.nranges = 4,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x02,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x20,
+				.last = 0x36,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x40,
+				.last = 0x56,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x60,
+				.last = 0x76,
+				.perm = AB5500_PERM_RO,
+			},
+		},
+	},
+	[AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+		.bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
+		.nranges = 7,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x02,
+				.last = 0x02,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x12,
+				.last = 0x12,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x30,
+				.last = 0x34,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x40,
+				.last = 0x44,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x54,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x64,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x70,
+				.last = 0x74,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+		.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+		.nranges = 13,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x01,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x02,
+				.last = 0x02,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0D,
+				.last = 0x0F,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1C,
+				.last = 0x1C,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1E,
+				.last = 0x1E,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x20,
+				.last = 0x21,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x25,
+				.last = 0x25,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x28,
+				.last = 0x2A,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x30,
+				.last = 0x33,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x40,
+				.last = 0x43,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x50,
+				.last = 0x53,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x60,
+				.last = 0x63,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x70,
+				.last = 0x73,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VIBRA] = {
+		.bankid = AB5500_BANK_VIBRA,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x10,
+				.last = 0x13,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xFE,
+				.last = 0xFE,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_AUDIO_HEADSETUSB] = {
+		.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+		.nranges = 2,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x48,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0xEB,
+				.last = 0xFB,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_SIM_USBSIM] = {
+		.bankid = AB5500_BANK_SIM_USBSIM,
+		.nranges = 1,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x13,
+				.last = 0x19,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+	[AB5500_BANK_VDENC] = {
+		.bankid = AB5500_BANK_VDENC,
+		.nranges = 12,
+		.range = (struct ab5500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x08,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x09,
+				.last = 0x09,
+				.perm = AB5500_PERM_RO,
+			},
+			{
+				.first = 0x0A,
+				.last = 0x12,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x15,
+				.last = 0x19,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x1B,
+				.last = 0x21,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x27,
+				.last = 0x2C,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x41,
+				.last = 0x41,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x45,
+				.last = 0x5B,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x5D,
+				.last = 0x5D,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x69,
+				.last = 0x69,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x6C,
+				.last = 0x6D,
+				.perm = AB5500_PERM_RW,
+			},
+			{
+				.first = 0x80,
+				.last = 0x81,
+				.perm = AB5500_PERM_RW,
+			},
+		},
+	},
+};
+
+static int ab5500_registers_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+	unsigned int i;
+	u8 bank = (u8)ab->debug_bank;
+
+	seq_printf(s, "ab5500 register values:\n");
+	for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
+		seq_printf(s, " bank %u, %s (0x%x):\n", bank,
+				bankinfo[bank].name,
+				bankinfo[bank].slave_addr);
+		for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
+			u8 reg;
+			int err;
+
+			for (reg = ab5500_reg_ranges[bank].range[i].first;
+				reg <= ab5500_reg_ranges[bank].range[i].last;
+				reg++) {
+				u8 value;
+
+				err = ab5500_get_register_interruptible_raw(ab,
+								bank, reg,
+								&value);
+				if (err < 0) {
+					dev_err(ab->dev, "get_reg failed %d"
+						"bank 0x%x reg 0x%x\n",
+						err, bank, reg);
+					return err;
+				}
+
+				err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
+						bank, reg, value);
+				if (err < 0) {
+					dev_err(ab->dev,
+						"seq_printf overflow\n");
+					/*
+					 * Error is not returned here since
+					 * the output is wanted in any case
+					 */
+					return 0;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+static int ab5500_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab5500_registers_fops = {
+	.open = ab5500_registers_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab5500_bank_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+
+	seq_printf(s, "%d\n", ab->debug_bank);
+	return 0;
+}
+
+static int ab5500_bank_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_bank_print, inode->i_private);
+}
+
+static ssize_t ab5500_bank_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_bank;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_bank);
+	if (err)
+		return -EINVAL;
+
+	if (user_bank >= AB5500_NUM_BANKS) {
+		dev_err(ab->dev,
+			"debugfs error input > number of banks\n");
+		return -EINVAL;
+	}
+
+	ab->debug_bank = user_bank;
+
+	return buf_size;
+}
+
+static int ab5500_address_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+
+	seq_printf(s, "0x%02X\n", ab->debug_address);
+	return 0;
+}
+
+static int ab5500_address_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_address_print, inode->i_private);
+}
+
+static ssize_t ab5500_address_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_address;
+	int err;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf) - 1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_address);
+	if (err)
+		return -EINVAL;
+	if (user_address > 0xff) {
+		dev_err(ab->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	ab->debug_address = user_address;
+	return buf_size;
+}
+
+static int ab5500_val_print(struct seq_file *s, void *p)
+{
+	struct ab5500 *ab = s->private;
+	int err;
+	u8 regvalue;
+
+	err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err) {
+		dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
+			", reg 0x%x\n", err, ab->debug_bank,
+			ab->debug_address);
+		return -EINVAL;
+	}
+	seq_printf(s, "0x%02X\n", regvalue);
+
+	return 0;
+}
+
+static int ab5500_val_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab5500_val_print, inode->i_private);
+}
+
+static ssize_t ab5500_val_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_val;
+	int err;
+	u8 regvalue;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_val);
+	if (err)
+		return -EINVAL;
+	if (user_val > 0xff) {
+		dev_err(ab->dev,
+			"debugfs error input > 0xff\n");
+		return -EINVAL;
+	}
+	err = ab5500_mask_and_set_register_interruptible_raw(
+		ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, 0xFF, (u8)user_val);
+	if (err)
+		return -EINVAL;
+
+	ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+		(u8)ab->debug_address, &regvalue);
+	if (err)
+		return -EINVAL;
+
+	return buf_size;
+}
+
+static const struct file_operations ab5500_bank_fops = {
+	.open = ab5500_bank_open,
+	.write = ab5500_bank_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_address_fops = {
+	.open = ab5500_address_open,
+	.write = ab5500_address_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_val_fops = {
+	.open = ab5500_val_open,
+	.write = ab5500_val_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static struct dentry *ab5500_dir;
+static struct dentry *ab5500_reg_file;
+static struct dentry *ab5500_bank_file;
+static struct dentry *ab5500_address_file;
+static struct dentry *ab5500_val_file;
+
+void __init ab5500_setup_debugfs(struct ab5500 *ab)
+{
+	ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
+	ab->debug_address = AB5500_CHIP_ID;
+
+	ab5500_dir = debugfs_create_dir("ab5500", NULL);
+	if (!ab5500_dir)
+		goto exit_no_debugfs;
+
+	ab5500_reg_file = debugfs_create_file("all-bank-registers",
+		S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
+	if (!ab5500_reg_file)
+		goto exit_destroy_dir;
+
+	ab5500_bank_file = debugfs_create_file("register-bank",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
+	if (!ab5500_bank_file)
+		goto exit_destroy_reg;
+
+	ab5500_address_file = debugfs_create_file("register-address",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
+	if (!ab5500_address_file)
+		goto exit_destroy_bank;
+
+	ab5500_val_file = debugfs_create_file("register-value",
+		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
+	if (!ab5500_val_file)
+		goto exit_destroy_address;
+
+	return;
+
+exit_destroy_address:
+	debugfs_remove(ab5500_address_file);
+exit_destroy_bank:
+	debugfs_remove(ab5500_bank_file);
+exit_destroy_reg:
+	debugfs_remove(ab5500_reg_file);
+exit_destroy_dir:
+	debugfs_remove(ab5500_dir);
+exit_no_debugfs:
+	dev_err(ab->dev, "failed to create debugfs entries.\n");
+	return;
+}
+
+void __exit ab5500_remove_debugfs(void)
+{
+	debugfs_remove(ab5500_val_file);
+	debugfs_remove(ab5500_address_file);
+	debugfs_remove(ab5500_bank_file);
+	debugfs_remove(ab5500_reg_file);
+	debugfs_remove(ab5500_dir);
+}
diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h
new file mode 100644
index 0000000..7330a9b
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs interface to the AB5500 core driver
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+void ab5500_setup_debugfs(struct ab5500 *ab);
+void ab5500_remove_debugfs(void);
+
+#else /* !CONFIG_DEBUG_FS */
+
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+}
+
+static inline void ab5500_remove_debugfs(void)
+{
+}
+
+#endif
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 387705e..1e91738 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -92,6 +92,8 @@
 #define AB8500_REV_REG			0x80
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
+#define AB8500_TURN_ON_STATUS		0x00
+
 /*
  * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
  * numbers are indexed into this array with (num / 8).
@@ -293,6 +295,7 @@
 	.irq_bus_lock		= ab8500_irq_lock,
 	.irq_bus_sync_unlock	= ab8500_irq_sync_unlock,
 	.irq_mask		= ab8500_irq_mask,
+	.irq_disable		= ab8500_irq_mask,
 	.irq_unmask		= ab8500_irq_unmask,
 };
 
@@ -811,12 +814,40 @@
 	return sprintf(buf, "%#x\n", value);
 }
 
+/*
+ * ab8500 has turned on due to (TURN_ON_STATUS):
+ * 0x01 PORnVbat
+ * 0x02 PonKey1dbF
+ * 0x04 PonKey2dbF
+ * 0x08 RTCAlarm
+ * 0x10 MainChDet
+ * 0x20 VbusDet
+ * 0x40 UsbIDDetect
+ * 0x80 Reserved
+ */
+static ssize_t show_turn_on_status(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int ret;
+	u8 value;
+	struct ab8500 *ab8500;
+
+	ab8500 = dev_get_drvdata(dev);
+	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+		AB8500_TURN_ON_STATUS, &value);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%#x\n", value);
+}
+
 static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
 static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
+static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
 
 static struct attribute *ab8500_sysfs_entries[] = {
 	&dev_attr_chip_id.attr,
 	&dev_attr_switch_off_status.attr,
+	&dev_attr_turn_on_status.attr,
 	NULL,
 };
 
@@ -843,11 +874,11 @@
 		return ret;
 
 	switch (value) {
-	case AB8500_CUTEARLY:
 	case AB8500_CUT1P0:
 	case AB8500_CUT1P1:
 	case AB8500_CUT2P0:
 	case AB8500_CUT3P0:
+	case AB8500_CUT3P3:
 		dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
 		break;
 	default:
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 64bdeeb..dedb7f6 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -8,6 +8,7 @@
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
 #include <linux/fs.h>
+#include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/platform_device.h>
 
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index f16afb2..e985d17 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -143,12 +143,15 @@
 }
 EXPORT_SYMBOL(ab8500_gpadc_get);
 
-static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ */
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 	int ad_value)
 {
 	int res;
 
-	switch (input) {
+	switch (channel) {
 	case MAIN_CHARGER_V:
 		/* For some reason we don't have calibrated data */
 		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
@@ -232,18 +235,46 @@
 	}
 	return res;
 }
+EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
 
 /**
  * ab8500_gpadc_convert() - gpadc conversion
- * @input:	analog input to be converted to digital data
+ * @channel:	analog channel to be converted to digital data
  *
  * This function converts the selected analog i/p to digital
  * data.
  */
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+	int ad_value;
+	int voltage;
+
+	ad_value = ab8500_gpadc_read_raw(gpadc, channel);
+	if (ad_value < 0) {
+		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+		return ad_value;
+	}
+
+	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
+
+	if (voltage < 0)
+		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+			" %d AD: 0x%x\n", channel, ad_value);
+
+	return voltage;
+}
+EXPORT_SYMBOL(ab8500_gpadc_convert);
+
+/**
+ * ab8500_gpadc_read_raw() - gpadc read
+ * @channel:	analog channel to be read
+ *
+ * This function obtains the raw ADC value, this then needs
+ * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ */
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 {
 	int ret;
-	u16 data = 0;
 	int looplimit = 0;
 	u8 val, low_data, high_data;
 
@@ -278,9 +309,9 @@
 		goto out;
 	}
 
-	/* Select the input source and set average samples to 16 */
+	/* Select the channel source and set average samples to 16 */
 	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
+		AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
 	if (ret < 0) {
 		dev_err(gpadc->dev,
 			"gpadc_conversion: set avg samples failed\n");
@@ -292,7 +323,7 @@
 	 * charging current sense if it needed, ABB 3.0 needs some special
 	 * treatment too.
 	 */
-	switch (input) {
+	switch (channel) {
 	case MAIN_CHARGER_C:
 	case USB_CHARGER_C:
 		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
@@ -359,7 +390,6 @@
 		goto out;
 	}
 
-	data = (high_data << 8) | low_data;
 	/* Disable GPADC */
 	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -370,8 +400,8 @@
 	/* Disable VTVout LDO this is required for GPADC */
 	regulator_disable(gpadc->regu);
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
-	return ret;
+
+	return (high_data << 8) | low_data;
 
 out:
 	/*
@@ -385,10 +415,10 @@
 	regulator_disable(gpadc->regu);
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	dev_err(gpadc->dev,
-		"gpadc_conversion: Failed to AD convert channel %d\n", input);
+		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
 	return ret;
 }
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_read_raw);
 
 /**
  * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 3921859..f20feef 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index f12720d..7ce65f4 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -8,6 +8,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/mfd/abx500.h>
 
 static LIST_HEAD(abx500_list);
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c71ae09..b85bbd7 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -584,7 +585,7 @@
 	return gpiochip_remove(&asic->gpio);
 }
 
-static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
 {
 	unsigned long flags;
 	u32 cdex;
@@ -596,8 +597,6 @@
 		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
 	}
 	spin_unlock_irqrestore(&asic->lock, flags);
-
-	return 0;
 }
 
 static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
@@ -779,6 +778,8 @@
 	.name          = "tmio-mmc",
 	.enable        = asic3_mmc_enable,
 	.disable       = asic3_mmc_disable,
+	.suspend       = asic3_mmc_disable,
+	.resume        = asic3_mmc_enable,
 	.platform_data = &asic3_mmc_data,
 	.pdata_size    = sizeof(asic3_mmc_data),
 	.num_resources = ARRAY_SIZE(asic3_mmc_resources),
@@ -811,24 +812,43 @@
 	return 0;
 }
 
+static int asic3_leds_suspend(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
+		msleep(1);
+
+	asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+	return 0;
+}
+
 static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
 	[0] = {
 		.name          = "leds-asic3",
 		.id            = 0,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 	[1] = {
 		.name          = "leds-asic3",
 		.id            = 1,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 	[2] = {
 		.name          = "leds-asic3",
 		.id            = 2,
 		.enable        = asic3_leds_enable,
 		.disable       = asic3_leds_disable,
+		.suspend       = asic3_leds_suspend,
+		.resume        = asic3_leds_enable,
 	},
 };
 
@@ -949,6 +969,7 @@
 		goto out_unmap;
 	}
 
+	asic->gpio.label = "asic3";
 	asic->gpio.base = pdata->gpio_base;
 	asic->gpio.ngpio = ASIC3_NUM_GPIOS;
 	asic->gpio.get = asic3_gpio_get;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 2fadbae..1b79c37 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -523,7 +523,7 @@
 	chip->ops->read_events(chip, &tmp);
 
 	ret = request_irq(client->irq, da903x_irq_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			IRQF_TRIGGER_FALLING,
 			"da903x", chip);
 	if (ret) {
 		dev_err(&client->dev, "failed to request irq %d\n",
diff --git a/drivers/mfd/db5500-prcmu-regs.h b/drivers/mfd/db5500-prcmu-regs.h
deleted file mode 100644
index 9a8e9e4..0000000
--- a/drivers/mfd/db5500-prcmu-regs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
-#include <mach/hardware.h>
-
-#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
-#define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
-
-#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3	0x2
-
-#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ	0x1
-
-#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	0x1
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
-
-#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
-#define PRCM_IOCR		(_PRCMU_BASE + 0x310)
-#define PRCM_IOCR_IOFORCE			0x1
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
-
-#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM	0x1
-
-#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
-
-/* System reset register */
-#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
-#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
-#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
-#define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
-#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
-#define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
-#define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
-
-
-#endif /* __MACH_PRCMU__REGS_H */
diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c
index 9dbb3ca..bb115b2 100644
--- a/drivers/mfd/db5500-prcmu.c
+++ b/drivers/mfd/db5500-prcmu.c
@@ -20,11 +20,11 @@
 #include <linux/jiffies.h>
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
-#include <linux/mfd/db5500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db5500-regs.h>
-#include "db5500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
 
 #define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
 #define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
@@ -109,15 +109,18 @@
 #define PRCMU_DSI_CLOCK_SETTING			0x00000128
 /* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
 #define PRCMU_DSI_LP_CLOCK_SETTING		0x00000135
-#define PRCMU_PLLDSI_FREQ_SETTING		0x0004013C
+#define PRCMU_PLLDSI_FREQ_SETTING		0x00020121
 #define PRCMU_DSI_PLLOUT_SEL_SETTING		0x00000002
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV		0x03000101
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV		0x03000201
 #define PRCMU_DISABLE_ESCAPE_CLOCK_DIV		0x00000101
 
 #define PRCMU_ENABLE_PLLDSI			0x00000001
 #define PRCMU_DISABLE_PLLDSI			0x00000000
 
 #define PRCMU_DSI_RESET_SW			0x00000003
+#define PRCMU_RESOUTN0_PIN			0x00000001
+#define PRCMU_RESOUTN1_PIN			0x00000002
+#define PRCMU_RESOUTN2_PIN			0x00000004
 
 #define PRCMU_PLLDSI_LOCKP_LOCKED		0x3
 
@@ -315,31 +318,31 @@
 		r = false;
 		break;
 	}
-	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
 	return r;
 }
 
 static bool read_mailbox_1(void)
 {
-	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_2(void)
 {
-	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_3(void)
 {
-	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_4(void)
 {
-	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -360,19 +363,19 @@
 		print_unknown_header_warning(5, header);
 		break;
 	}
-	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_6(void)
 {
-	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_7(void)
 {
-	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -434,7 +437,7 @@
 		return -ENODEV;
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
 		prcmu_irq_thread_fn, 0, "prcmu", NULL);
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
deleted file mode 100644
index 3bbf04d..0000000
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-#ifndef __DB8500_PRCMU_REGS_H
-#define __DB8500_PRCMU_REGS_H
-
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
-
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE	BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK	0xF
-
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
-
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
-
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	BIT(8)
-
-#define PRCM_ARMCLKFIX_MGT	0x0
-#define PRCM_A9_RESETN_CLR	0x1f4
-#define PRCM_A9_RESETN_SET	0x1f0
-#define PRCM_ARM_LS_CLAMP	0x30C
-#define PRCM_SRAM_A9		0x308
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY	0x130
-#define PRCM_IOCR		0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
-
-#define PRCM_A9_MASK_ACK	0x32C
-#define PRCM_ARMITMSK31TO0	0x11C
-#define PRCM_ARMITMSK63TO32	0x120
-#define PRCM_ARMITMSK95TO64	0x124
-#define PRCM_ARMITMSK127TO96	0x128
-#define PRCM_POWER_STATE_VAL	0x25C
-#define PRCM_ARMITVAL31TO0	0x260
-#define PRCM_ARMITVAL63TO32	0x264
-#define PRCM_ARMITVAL95TO64	0x268
-#define PRCM_ARMITVAL127TO96	0x26C
-
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
-
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
-
-#define PRCM_ITSTATUS0		0x148
-#define PRCM_ITSTATUS1		0x150
-#define PRCM_ITSTATUS2		0x158
-#define PRCM_ITSTATUS3		0x160
-#define PRCM_ITSTATUS4		0x168
-#define PRCM_ITSTATUS5		0x484
-#define PRCM_ITCLEAR5		0x488
-#define PRCM_ARMIT_MASKXP70_IT	0x1018
-
-/* System reset register */
-#define PRCM_APE_SOFTRST 0x228
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
-
-/* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
-#define PRCM_SEM_PRCM_SEM BIT(0)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ	0x500
-#define PRCM_PLLDSI_ENABLE	0x504
-#define PRCM_PLLDSI_LOCKP	0x508
-#define PRCM_DSI_PLLOUT_SEL	0x530
-#define PRCM_DSITVCLK_DIV	0x52C
-#define PRCM_APE_RESETN_SET	0x1E4
-#define PRCM_APE_RESETN_CLR	0x1E8
-
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_TENSEL_MASK	BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS	BIT(16)
-#define PRCM_TCR_DOZE_MODE	BIT(17)
-
-#define PRCM_CLKOCR			0x1CC
-#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
-#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
-#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
-#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
-#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
-#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
-#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
-#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
-#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
-
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN		BIT(8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET		0x410
-#define PRCM_SRAM_LS_SLEEP	0x304
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR		0x138
-
-/* GPIOCR register */
-#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
-
-#define PRCM_DDR_SUBSYS_APE_MINBW  0x438
-
-#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 02a15d7..a25ab9c 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -27,14 +27,14 @@
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
 #include <mach/id.h>
-#include "db8500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
 
 /* Offset for the firmware version within the TCPM */
 #define PRCMU_FW_VERSION_OFFSET 0xA4
@@ -131,12 +131,14 @@
 #define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
 #define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
 #define MB1H_RELEASE_USB_WAKEUP 0x5
+#define MB1H_PLL_ON_OFF 0x6
 
 /* Mailbox 1 Requests */
 #define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
 #define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
-#define PRCM_REQ_MB1_APE_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x4)
-#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE	(PRCM_REQ_MB1 + 0x8)
+#define PRCM_REQ_MB1_PLL_ON_OFF			(PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC1_OFF	0x4
+#define PLL_SOC1_ON	0x8
 
 /* Mailbox 1 ACKs */
 #define PRCM_ACK_MB1_CURRENT_ARM_OPP	(PRCM_ACK_MB1 + 0x0)
@@ -184,6 +186,11 @@
 #define MB4H_HOTDOG	0x12
 #define MB4H_HOTMON	0x13
 #define MB4H_HOT_PERIOD	0x14
+#define MB4H_A9WDOG_CONF 0x16
+#define MB4H_A9WDOG_EN   0x17
+#define MB4H_A9WDOG_DIS  0x18
+#define MB4H_A9WDOG_LOAD 0x19
+#define MB4H_A9WDOG_KICK 0x20
 
 /* Mailbox 4 Requests */
 #define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE	(PRCM_REQ_MB4 + 0x0)
@@ -196,6 +203,13 @@
 #define PRCM_REQ_MB4_HOT_PERIOD			(PRCM_REQ_MB4 + 0x0)
 #define HOTMON_CONFIG_LOW			BIT(0)
 #define HOTMON_CONFIG_HIGH			BIT(1)
+#define PRCM_REQ_MB4_A9WDOG_0			(PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_A9WDOG_1			(PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_A9WDOG_2			(PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_A9WDOG_3			(PRCM_REQ_MB4 + 0x3)
+#define A9WDOG_AUTO_OFF_EN			BIT(7)
+#define A9WDOG_AUTO_OFF_DIS			0
+#define A9WDOG_ID_MASK				0xf
 
 /* Mailbox 5 Requests */
 #define PRCM_REQ_MB5_I2C_SLAVE_OP	(PRCM_REQ_MB5 + 0x0)
@@ -412,7 +426,7 @@
 
 static DEFINE_SPINLOCK(clk_mgt_lock);
 
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
 struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 	CLK_MGT_ENTRY(SGACLK),
 	CLK_MGT_ENTRY(UARTCLK),
@@ -445,6 +459,35 @@
 	CLK_MGT_ENTRY(UICCCLK),
 };
 
+static struct regulator *hwacc_regulator[NUM_HW_ACC];
+static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
+
+static bool hwacc_enabled[NUM_HW_ACC];
+static bool hwacc_ret_enabled[NUM_HW_ACC];
+
+static const char *hwacc_regulator_name[NUM_HW_ACC] = {
+	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp",
+	[HW_ACC_SVAPIPE]	= "hwacc-sva-pipe",
+	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp",
+	[HW_ACC_SIAPIPE]	= "hwacc-sia-pipe",
+	[HW_ACC_SGA]		= "hwacc-sga",
+	[HW_ACC_B2R2]		= "hwacc-b2r2",
+	[HW_ACC_MCDE]		= "hwacc-mcde",
+	[HW_ACC_ESRAM1]		= "hwacc-esram1",
+	[HW_ACC_ESRAM2]		= "hwacc-esram2",
+	[HW_ACC_ESRAM3]		= "hwacc-esram3",
+	[HW_ACC_ESRAM4]		= "hwacc-esram4",
+};
+
+static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
+	[HW_ACC_SVAMMDSP]	= "hwacc-sva-mmdsp-ret",
+	[HW_ACC_SIAMMDSP]	= "hwacc-sia-mmdsp-ret",
+	[HW_ACC_ESRAM1]		= "hwacc-esram1-ret",
+	[HW_ACC_ESRAM2]		= "hwacc-esram2-ret",
+	[HW_ACC_ESRAM3]		= "hwacc-esram3-ret",
+	[HW_ACC_ESRAM4]		= "hwacc-esram4-ret",
+};
+
 /*
 * Used by MCDE to setup all necessary PRCMU registers
 */
@@ -493,55 +536,51 @@
 } prcmu_version;
 
 
-int prcmu_enable_dsipll(void)
+int db8500_prcmu_enable_dsipll(void)
 {
 	int i;
 	unsigned int plldsifreq;
 
 	/* Clear DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
 	/* Unclamp DSIPLL in/out */
-	writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
 
 	if (prcmu_is_u8400())
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
 	else
 		plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
 	/* Set DSI PLL FREQ */
-	writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
-	writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
-		(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+	writel(plldsifreq, PRCM_PLLDSI_FREQ);
+	writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
 	/* Enable Escape clocks */
-	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 
 	/* Start DSI PLL */
-	writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Reset DSI PLL */
-	writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+	writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
 	for (i = 0; i < 10; i++) {
-		if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
-			PRCMU_PLLDSI_LOCKP_LOCKED)
+		if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
 					== PRCMU_PLLDSI_LOCKP_LOCKED)
 			break;
 		udelay(100);
 	}
 	/* Set DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
 	return 0;
 }
 
-int prcmu_disable_dsipll(void)
+int db8500_prcmu_disable_dsipll(void)
 {
 	/* Disable dsi pll */
-	writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+	writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
 	/* Disable  escapeclock */
-	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
-					(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
 	return 0;
 }
 
-int prcmu_set_display_clocks(void)
+int db8500_prcmu_set_display_clocks(void)
 {
 	unsigned long flags;
 	unsigned int dsiclk;
@@ -554,15 +593,15 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
-	writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
-	writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+	writel(dsiclk, PRCM_HDMICLK_MGT);
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+	writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -578,8 +617,8 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -592,8 +631,8 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&gpiocr_lock, flags);
-	reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
-	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+	reg = readl(PRCM_GPIOCR);
+	writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
 	spin_unlock_irqrestore(&gpiocr_lock, flags);
 }
 
@@ -701,7 +740,7 @@
 
 	spin_lock_irqsave(&clkout_lock, flags);
 
-	val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+	val = readl(PRCM_CLKOCR);
 	if (val & div_mask) {
 		if (div) {
 			if ((val & mask) != bits) {
@@ -715,7 +754,7 @@
 			}
 		}
 	}
-	writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+	writel((bits | (val & ~mask)), PRCM_CLKOCR);
 	requests[clkout] += (div ? 1 : -1);
 
 unlock_and_return:
@@ -724,7 +763,7 @@
 	return r;
 }
 
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
 {
 	unsigned long flags;
 
@@ -732,7 +771,7 @@
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
@@ -741,7 +780,7 @@
 	writeb((keep_ulp_clk ? 1 : 0),
 		(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
 	writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 
@@ -770,18 +809,18 @@
 		return;
 
 	for (i = 0; i < 2; i++) {
-		while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+		while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 			cpu_relax();
 		writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
 		writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
 		writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-		writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+		writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 	}
 	last_dbb_events = dbb_events;
 	last_abb_events = abb_events;
 }
 
-void prcmu_enable_wakeups(u32 wakeups)
+void db8500_prcmu_enable_wakeups(u32 wakeups)
 {
 	unsigned long flags;
 	u32 bits;
@@ -802,7 +841,7 @@
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
 
-void prcmu_config_abb_event_readout(u32 abb_events)
+void db8500_prcmu_config_abb_event_readout(u32 abb_events)
 {
 	unsigned long flags;
 
@@ -814,7 +853,7 @@
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
 
-void prcmu_get_abb_event_buffer(void __iomem **buf)
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
 {
 	if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
 		*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
@@ -823,13 +862,13 @@
 }
 
 /**
- * prcmu_set_arm_opp - set the appropriate ARM OPP
+ * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
  * @opp: The new ARM operating point to which transition is to be made
  * Returns: 0 on success, non-zero on failure
  *
  * This function sets the the operating point of the ARM.
  */
-int prcmu_set_arm_opp(u8 opp)
+int db8500_prcmu_set_arm_opp(u8 opp)
 {
 	int r;
 
@@ -840,14 +879,14 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -860,11 +899,11 @@
 }
 
 /**
- * prcmu_get_arm_opp - get the current ARM OPP
+ * db8500_prcmu_get_arm_opp - get the current ARM OPP
  *
  * Returns: the current ARM OPP
  */
-int prcmu_get_arm_opp(void)
+int db8500_prcmu_get_arm_opp(void)
 {
 	return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
 }
@@ -876,7 +915,7 @@
  */
 int prcmu_get_ddr_opp(void)
 {
-	return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+	return readb(PRCM_DDR_SUBSYS_APE_MINBW);
 }
 
 /**
@@ -892,7 +931,7 @@
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
 	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
-		writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
 }
@@ -909,14 +948,14 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 	writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
 	writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -966,12 +1005,12 @@
 		header = MB1H_RELEASE_APE_OPP_100_VOLT;
 	}
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != header) ||
@@ -995,13 +1034,13 @@
 
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RELEASE_USB_WAKEUP,
 		(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
 
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
@@ -1013,15 +1052,169 @@
 	return r;
 }
 
+static int request_pll(u8 clock, bool enable)
+{
+	int r = 0;
+
+	if (clock == PRCMU_PLLSOC1)
+		clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
+	else
+		return -EINVAL;
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+	writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
+
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb1_transfer.work);
+
+	if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+		r = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return r;
+}
+
 /**
- * prcmu_set_epod - set the state of a EPOD (power domain)
+ * prcmu_set_hwacc - set the power state of a h/w accelerator
+ * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
+ * @state: The new power state (enum hw_acc_state).
+ *
+ * This function sets the power state of a hardware accelerator.
+ * This function should not be called from interrupt context.
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator framework API.
+ */
+int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
+{
+	int r = 0;
+	bool ram_retention = false;
+	bool enable, enable_ret;
+
+	/* check argument */
+	BUG_ON(hwacc_dev >= NUM_HW_ACC);
+
+	/* get state of switches */
+	enable = hwacc_enabled[hwacc_dev];
+	enable_ret = hwacc_ret_enabled[hwacc_dev];
+
+	/* set flag if retention is possible */
+	switch (hwacc_dev) {
+	case HW_ACC_SVAMMDSP:
+	case HW_ACC_SIAMMDSP:
+	case HW_ACC_ESRAM1:
+	case HW_ACC_ESRAM2:
+	case HW_ACC_ESRAM3:
+	case HW_ACC_ESRAM4:
+		ram_retention = true;
+		break;
+	}
+
+	/* check argument */
+	BUG_ON(state > HW_ON);
+	BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
+
+	/* modify enable flags */
+	switch (state) {
+	case HW_OFF:
+		enable_ret = false;
+		enable = false;
+		break;
+	case HW_ON:
+		enable = true;
+		break;
+	case HW_OFF_RAMRET:
+		enable_ret = true;
+		enable = false;
+		break;
+	}
+
+	/* get regulator (lazy) */
+	if (hwacc_regulator[hwacc_dev] == NULL) {
+		hwacc_regulator[hwacc_dev] = regulator_get(NULL,
+			hwacc_regulator_name[hwacc_dev]);
+		if (IS_ERR(hwacc_regulator[hwacc_dev])) {
+			pr_err("prcmu: failed to get supply %s\n",
+				hwacc_regulator_name[hwacc_dev]);
+			r = PTR_ERR(hwacc_regulator[hwacc_dev]);
+			goto out;
+		}
+	}
+
+	if (ram_retention) {
+		if (hwacc_ret_regulator[hwacc_dev] == NULL) {
+			hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
+				hwacc_ret_regulator_name[hwacc_dev]);
+			if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
+				pr_err("prcmu: failed to get supply %s\n",
+					hwacc_ret_regulator_name[hwacc_dev]);
+				r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
+				goto out;
+			}
+		}
+	}
+
+	/* set regulators */
+	if (ram_retention) {
+		if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
+			r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
+			if (r < 0) {
+				pr_err("prcmu_set_hwacc: ret enable failed\n");
+				goto out;
+			}
+			hwacc_ret_enabled[hwacc_dev] = true;
+		}
+	}
+
+	if (enable && !hwacc_enabled[hwacc_dev]) {
+		r = regulator_enable(hwacc_regulator[hwacc_dev]);
+		if (r < 0) {
+			pr_err("prcmu_set_hwacc: enable failed\n");
+			goto out;
+		}
+		hwacc_enabled[hwacc_dev] = true;
+	}
+
+	if (!enable && hwacc_enabled[hwacc_dev]) {
+		r = regulator_disable(hwacc_regulator[hwacc_dev]);
+		if (r < 0) {
+			pr_err("prcmu_set_hwacc: disable failed\n");
+			goto out;
+		}
+		hwacc_enabled[hwacc_dev] = false;
+	}
+
+	if (ram_retention) {
+		if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
+			r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
+			if (r < 0) {
+				pr_err("prcmu_set_hwacc: ret disable failed\n");
+				goto out;
+			}
+			hwacc_ret_enabled[hwacc_dev] = false;
+		}
+	}
+
+out:
+	return r;
+}
+EXPORT_SYMBOL(prcmu_set_hwacc);
+
+/**
+ * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
  * @epod_id: The EPOD to set
  * @epod_state: The new EPOD state
  *
  * This function sets the state of a EPOD (power domain). It may not be called
  * from interrupt context.
  */
-int prcmu_set_epod(u16 epod_id, u8 epod_state)
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	int r = 0;
 	bool ram_retention = false;
@@ -1048,7 +1241,7 @@
 	mutex_lock(&mb2_transfer.lock);
 
 	/* wait for mailbox */
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
 		cpu_relax();
 
 	/* fill in mailbox */
@@ -1058,7 +1251,7 @@
 
 	writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
 
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
 
 	/*
 	 * The current firmware version does not handle errors correctly,
@@ -1145,13 +1338,13 @@
 
 	spin_lock_irqsave(&mb3_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
 		cpu_relax();
 
 	writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
 
 	writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb3_transfer.lock, flags);
 
@@ -1177,7 +1370,7 @@
 
 	if (!enable)
 		val |= PRCM_TCR_STOP_TIMERS;
-	writel(val, (_PRCMU_BASE + PRCM_TCR));
+	writel(val, PRCM_TCR);
 
 	return 0;
 }
@@ -1190,7 +1383,7 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1203,34 +1396,61 @@
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
 	return 0;
 }
 
+static int request_sga_clock(u8 clock, bool enable)
+{
+	u32 val;
+	int ret;
+
+	if (enable) {
+		val = readl(PRCM_CGATING_BYPASS);
+		writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+	}
+
+	ret = request_reg_clock(clock, enable);
+
+	if (!ret && !enable) {
+		val = readl(PRCM_CGATING_BYPASS);
+		writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+	}
+
+	return ret;
+}
+
 /**
- * prcmu_request_clock() - Request for a clock to be enabled or disabled.
+ * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
  * @clock:      The clock for which the request is made.
  * @enable:     Whether the clock should be enabled (true) or disabled (false).
  *
  * This function should only be used by the clock implementation.
  * Do not use it from any other place!
  */
-int prcmu_request_clock(u8 clock, bool enable)
+int db8500_prcmu_request_clock(u8 clock, bool enable)
 {
+	switch(clock) {
+	case PRCMU_SGACLK:
+		return request_sga_clock(clock, enable);
+	case PRCMU_TIMCLK:
+		return request_timclk(enable);
+	case PRCMU_SYSCLK:
+		return request_sysclk(enable);
+	case PRCMU_PLLSOC1:
+		return request_pll(clock, enable);
+	default:
+		break;
+	}
 	if (clock < PRCMU_NUM_REG_CLOCKS)
 		return request_reg_clock(clock, enable);
-	else if (clock == PRCMU_TIMCLK)
-		return request_timclk(enable);
-	else if (clock == PRCMU_SYSCLK)
-		return request_sysclk(enable);
-	else
-		return -EINVAL;
+	return -EINVAL;
 }
 
-int prcmu_config_esram0_deep_sleep(u8 state)
+int db8500_prcmu_config_esram0_deep_sleep(u8 state)
 {
 	if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
 	    (state < ESRAM0_DEEP_SLEEP_STATE_OFF))
@@ -1238,7 +1458,7 @@
 
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
@@ -1248,7 +1468,7 @@
 	       (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
 	writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1260,13 +1480,13 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
 	writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1278,7 +1498,7 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
@@ -1287,7 +1507,7 @@
 		(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
 	writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1299,13 +1519,13 @@
 {
 	mutex_lock(&mb4_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
 		cpu_relax();
 
 	writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
 	writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb4_transfer.work);
 
 	mutex_unlock(&mb4_transfer.lock);
@@ -1326,6 +1546,78 @@
 	return config_hot_period(0xFFFF);
 }
 
+static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
+{
+
+	mutex_lock(&mb4_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+		cpu_relax();
+
+	writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
+	writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
+	writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
+	writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
+
+	writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+	writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb4_transfer.work);
+
+	mutex_unlock(&mb4_transfer.lock);
+
+	return 0;
+
+}
+
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	BUG_ON(num == 0 || num > 0xf);
+	return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
+			    sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
+			    A9WDOG_AUTO_OFF_DIS);
+}
+
+int prcmu_enable_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
+}
+
+int prcmu_disable_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
+}
+
+int prcmu_kick_a9wdog(u8 id)
+{
+	return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
+}
+
+/*
+ * timeout is 28 bit, in ms.
+ */
+#define MAX_WATCHDOG_TIMEOUT 131000
+int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+	if (timeout > MAX_WATCHDOG_TIMEOUT)
+		/*
+		 * Due to calculation bug in prcmu fw, timeouts
+		 * can't be bigger than 131 seconds.
+		 */
+		return -EINVAL;
+
+	return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
+			    (id & A9WDOG_ID_MASK) |
+			    /*
+			     * Put the lowest 28 bits of timeout at
+			     * offset 4. Four first bits are used for id.
+			     */
+			    (u8)((timeout << 4) & 0xf0),
+			    (u8)((timeout >> 4) & 0xff),
+			    (u8)((timeout >> 12) & 0xff),
+			    (u8)((timeout >> 20) & 0xff));
+}
+
 /**
  * prcmu_set_clock_divider() - Configure the clock divider.
  * @clock:	The clock for which the request is made.
@@ -1345,7 +1637,7 @@
 	spin_lock_irqsave(&clk_mgt_lock, flags);
 
 	/* Grab the HW semaphore. */
-	while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
 	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1354,7 +1646,7 @@
 	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
 
 	/* Release the HW semaphore. */
-	writel(0, (_PRCMU_BASE + PRCM_SEM));
+	writel(0, PRCM_SEM);
 
 	spin_unlock_irqrestore(&clk_mgt_lock, flags);
 
@@ -1380,7 +1672,7 @@
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1388,7 +1680,7 @@
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1426,7 +1718,7 @@
 
 	mutex_lock(&mb5_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
 		cpu_relax();
 
 	writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1434,7 +1726,7 @@
 	writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
 	writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
 
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
 
 	if (!wait_for_completion_timeout(&mb5_transfer.work,
 				msecs_to_jiffies(20000))) {
@@ -1456,21 +1748,44 @@
 void prcmu_ac_wake_req(void)
 {
 	u32 val;
+	u32 status;
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
 		goto unlock_and_return;
 
 	atomic_set(&ac_wake_req_state, 1);
 
-	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+retry:
+	writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
-			msecs_to_jiffies(20000))) {
-		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			msecs_to_jiffies(5000))) {
+		pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
+			__func__);
+		goto unlock_and_return;
+	}
+
+	/*
+	 * The modem can generate an AC_WAKE_ACK, and then still go to sleep.
+	 * As a workaround, we wait, and then check that the modem is indeed
+	 * awake (in terms of the value of the PRCM_MOD_AWAKE_STATUS
+	 * register, which may not be the whole truth).
+	 */
+	udelay(400);
+	status = (readl(PRCM_MOD_AWAKE_STATUS) & BITS(0, 2));
+	if (status != (PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE |
+			PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE)) {
+		pr_err("prcmu: %s received ack, but modem not awake (0x%X).\n",
+			__func__, status);
+		udelay(1200);
+		writel(val, PRCM_HOSTACCESS_REQ);
+		if (wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+				msecs_to_jiffies(5000)))
+			goto retry;
+		pr_crit("prcmu: %s timed out (5 s) waiting for AC_SLEEP_ACK.\n",
 			__func__);
 	}
 
@@ -1487,16 +1802,16 @@
 
 	mutex_lock(&mb0_transfer.ac_wake_lock);
 
-	val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+	val = readl(PRCM_HOSTACCESS_REQ);
 	if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
 		goto unlock_and_return;
 
 	writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
-		(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+		PRCM_HOSTACCESS_REQ);
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
-			msecs_to_jiffies(20000))) {
-		pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+			msecs_to_jiffies(5000))) {
+		pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
 			__func__);
 	}
 
@@ -1506,21 +1821,32 @@
 	mutex_unlock(&mb0_transfer.ac_wake_lock);
 }
 
-bool prcmu_is_ac_wake_requested(void)
+bool db8500_prcmu_is_ac_wake_requested(void)
 {
 	return (atomic_read(&ac_wake_req_state) != 0);
 }
 
 /**
- * prcmu_system_reset - System reset
+ * db8500_prcmu_system_reset - System reset
  *
- * Saves the reset reason code and then sets the APE_SOFRST register which
+ * Saves the reset reason code and then sets the APE_SOFTRST register which
  * fires interrupt to fw
  */
-void prcmu_system_reset(u16 reset_code)
+void db8500_prcmu_system_reset(u16 reset_code)
 {
 	writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
-	writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+	writel(1, PRCM_APE_SOFTRST);
+}
+
+/**
+ * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
+ *
+ * Retrieves the reset reason code stored by prcmu_system_reset() before
+ * last restart.
+ */
+u16 db8500_prcmu_get_reset_code(void)
+{
+	return readw(tcdm_base + PRCM_SW_RST_REASON);
 }
 
 /**
@@ -1530,11 +1856,11 @@
 {
 	mutex_lock(&mb1_transfer.lock);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
 		cpu_relax();
 
 	writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
 	wait_for_completion(&mb1_transfer.work);
 
 	/*
@@ -1551,11 +1877,11 @@
 
 	spin_lock_irqsave(&mb0_transfer.lock, flags);
 
-	while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
 		cpu_relax();
 
 	writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+	writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
 
 	spin_unlock_irqrestore(&mb0_transfer.lock, flags);
 }
@@ -1600,7 +1926,7 @@
 		r = false;
 		break;
 	}
-	writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
 	return r;
 }
 
@@ -1613,7 +1939,7 @@
 		PRCM_ACK_MB1_CURRENT_APE_OPP);
 	mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
 		PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
-	writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
 	complete(&mb1_transfer.work);
 	return false;
 }
@@ -1621,14 +1947,14 @@
 static bool read_mailbox_2(void)
 {
 	mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
-	writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
 	complete(&mb2_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_3(void)
 {
-	writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1643,6 +1969,11 @@
 	case MB4H_HOTDOG:
 	case MB4H_HOTMON:
 	case MB4H_HOT_PERIOD:
+	case MB4H_A9WDOG_CONF:
+	case MB4H_A9WDOG_EN:
+	case MB4H_A9WDOG_DIS:
+	case MB4H_A9WDOG_LOAD:
+	case MB4H_A9WDOG_KICK:
 		break;
 	default:
 		print_unknown_header_warning(4, header);
@@ -1650,7 +1981,7 @@
 		break;
 	}
 
-	writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
 
 	if (do_complete)
 		complete(&mb4_transfer.work);
@@ -1662,20 +1993,20 @@
 {
 	mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
 	mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
-	writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
 	complete(&mb5_transfer.work);
 	return false;
 }
 
 static bool read_mailbox_6(void)
 {
-	writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
 static bool read_mailbox_7(void)
 {
-	writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
 	return false;
 }
 
@@ -1696,7 +2027,7 @@
 	u8 n;
 	irqreturn_t r;
 
-	bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+	bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
 	if (unlikely(!bits))
 		return IRQ_NONE;
 
@@ -1768,7 +2099,7 @@
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-void __init prcmu_early_init(void)
+void __init db8500_prcmu_early_init(void)
 {
 	unsigned int i;
 
@@ -1826,6 +2157,16 @@
 	}
 }
 
+static void __init db8500_prcmu_init_clkforce(void)
+{
+	u32 val;
+
+	val = readl(PRCM_A9PL_FORCE_CLKEN);
+	val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
+		PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
+	writel(val, (PRCM_A9PL_FORCE_CLKEN));
+}
+
 /*
  * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
  */
@@ -1861,7 +2202,42 @@
 
 static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
 	REGULATOR_SUPPLY("vsupply", "b2r2.0"),
-	REGULATOR_SUPPLY("vsupply", "mcde.0"),
+	REGULATOR_SUPPLY("vsupply", "mcde"),
+};
+
+/* SVA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
+	REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
+};
+
+/* SVA pipe regulator switch */
+static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
+	REGULATOR_SUPPLY("sva-pipe", "cm_control"),
+};
+
+/* SIA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
+	REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
+};
+
+/* SIA pipe regulator switch */
+static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
+	REGULATOR_SUPPLY("sia-pipe", "cm_control"),
+};
+
+static struct regulator_consumer_supply db8500_sga_consumers[] = {
+	REGULATOR_SUPPLY("v-mali", NULL),
+};
+
+/* ESRAM1 and 2 regulator switch */
+static struct regulator_consumer_supply db8500_esram12_consumers[] = {
+	REGULATOR_SUPPLY("esram12", "cm_control"),
+};
+
+/* ESRAM3 and 4 regulator switch */
+static struct regulator_consumer_supply db8500_esram34_consumers[] = {
+	REGULATOR_SUPPLY("v-esram34", "mcde"),
+	REGULATOR_SUPPLY("esram34", "cm_control"),
 };
 
 static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -1923,6 +2299,8 @@
 			.name = "db8500-sva-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_svammdsp_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
 		.constraints = {
@@ -1937,6 +2315,8 @@
 			.name = "db8500-sva-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_svapipe_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
 		.supply_regulator = "db8500-vape",
@@ -1944,6 +2324,8 @@
 			.name = "db8500-sia-mmdsp",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_siammdsp_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
 		.constraints = {
@@ -1957,6 +2339,8 @@
 			.name = "db8500-sia-pipe",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_siapipe_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_SGA] = {
 		.supply_regulator = "db8500-vape",
@@ -1964,6 +2348,9 @@
 			.name = "db8500-sga",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_sga_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
+
 	},
 	[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
 		.supply_regulator = "db8500-vape",
@@ -1980,6 +2367,8 @@
 			.name = "db8500-esram12",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_esram12_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
 		.constraints = {
@@ -1993,6 +2382,8 @@
 			.name = "db8500-esram34",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
+		.consumer_supplies = db8500_esram34_consumers,
+		.num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
 	},
 	[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
 		.constraints = {
@@ -2024,8 +2415,10 @@
 	if (ux500_is_svp())
 		return -ENODEV;
 
+	db8500_prcmu_init_clkforce();
+
 	/* Clean up the mailbox interrupts after pre-kernel code. */
-	writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
 	err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
 		prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
new file mode 100644
index 0000000..ec22e9f
--- /dev/null
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
+ */
+
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_SVACLK_MGT_OFF		0x008
+#define PRCM_SIACLK_MGT_OFF		0x00C
+#define PRCM_SGACLK_MGT_OFF		0x014
+#define PRCM_UARTCLK_MGT_OFF		0x018
+#define PRCM_MSP02CLK_MGT_OFF		0x01C
+#define PRCM_I2CCLK_MGT_OFF		0x020
+#define PRCM_SDMMCCLK_MGT_OFF		0x024
+#define PRCM_SLIMCLK_MGT_OFF		0x028
+#define PRCM_PER1CLK_MGT_OFF		0x02C
+#define PRCM_PER2CLK_MGT_OFF		0x030
+#define PRCM_PER3CLK_MGT_OFF		0x034
+#define PRCM_PER5CLK_MGT_OFF		0x038
+#define PRCM_PER6CLK_MGT_OFF		0x03C
+#define PRCM_PER7CLK_MGT_OFF		0x040
+#define PRCM_PWMCLK_MGT_OFF		0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF		0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF		0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF		0x044
+#define PRCM_BMLCLK_MGT_OFF		0x04C
+#define PRCM_HSITXCLK_MGT_OFF		0x050
+#define PRCM_HSIRXCLK_MGT_OFF		0x054
+#define PRCM_HDMICLK_MGT_OFF		0x058
+#define PRCM_APEATCLK_MGT_OFF		0x05C
+#define PRCM_APETRACECLK_MGT_OFF	0x060
+#define PRCM_MCDECLK_MGT_OFF		0x064
+#define PRCM_IPI2CCLK_MGT_OFF		0x068
+#define PRCM_DSIALTCLK_MGT_OFF		0x06C
+#define PRCM_DMACLK_MGT_OFF		0x074
+#define PRCM_B2R2CLK_MGT_OFF		0x078
+#define PRCM_TVCLK_MGT_OFF		0x07C
+#define PRCM_UNIPROCLK_MGT_OFF		0x278
+#define PRCM_SSPCLK_MGT_OFF		0x280
+#define PRCM_RNGCLK_MGT_OFF		0x284
+#define PRCM_UICCCLK_MGT_OFF		0x27C
+#define PRCM_MSP1CLK_MGT_OFF		0x288
+
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
+
+#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3	0x2
+
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ	0x1
+
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
+
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN	(_PRCMU_BASE + 0x19C)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCM_IOCR		(_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE			0x1
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
+
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
+#define ARM_WAKEUP_MODEM	0x1
+
+#define PRCM_ARM_IT1_CLR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+
+#define PRCM_MOD_AWAKE_STATUS	(_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE	BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE	BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO	BIT(2)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+#define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK	(1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK	BITS(16, 29)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM                   (_PRCMU_BASE + 0x400)
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+#define PRCM_TCR                   (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK       BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS       BIT(16)
+#define PRCM_TCR_DOZE_MODE         BIT(17)
+
+#define PRCM_CLKOCR_CLKODIV0_SHIFT	0
+#define PRCM_CLKOCR_CLKODIV0_MASK	BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT	6
+#define PRCM_CLKOCR_CLKOSEL0_MASK	BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT	16
+#define PRCM_CLKOCR_CLKODIV1_MASK	BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT	22
+#define PRCM_CLKOCR_CLKOSEL1_MASK	BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE		BIT(28)
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK	BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK	BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN		BIT(8)
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW	(_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS		(_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2	BIT(6)
+
+/* Miscellaneous unit registers */
+#define PRCM_RESOUTN_SET		(_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR		(_PRCMU_BASE + 0x218)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST		(_PRCMU_BASE + 0x228)
+
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 3d4a861..8ad88da 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
new file mode 100644
index 0000000..97c2776
--- /dev/null
+++ b/drivers/mfd/intel_msic.c
@@ -0,0 +1,502 @@
+/*
+ * Driver for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define MSIC_VENDOR(id)		((id >> 6) & 3)
+#define MSIC_VERSION(id)	(id & 0x3f)
+#define MSIC_MAJOR(id)		('A' + ((id >> 3) & 7))
+#define MSIC_MINOR(id)		(id & 7)
+
+/*
+ * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
+ * Since IRQ block starts from address 0x002 we need to substract that from
+ * the actual IRQ status register address.
+ */
+#define MSIC_IRQ_STATUS(x)	(INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
+#define MSIC_IRQ_STATUS_ACCDET	MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
+
+/*
+ * The SCU hardware has limitation of 16 bytes per read/write buffer on
+ * Medfield.
+ */
+#define SCU_IPC_RWBUF_LIMIT	16
+
+/**
+ * struct intel_msic - an MSIC MFD instance
+ * @pdev: pointer to the platform device
+ * @vendor: vendor ID
+ * @version: chip version
+ * @irq_base: base address of the mapped MSIC SRAM interrupt tree
+ */
+struct intel_msic {
+	struct platform_device		*pdev;
+	unsigned			vendor;
+	unsigned			version;
+	void __iomem			*irq_base;
+};
+
+static struct resource msic_touch_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_adc_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_battery_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_gpio_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_audio_resources[] = {
+	{
+		.name		= "IRQ",
+		.flags		= IORESOURCE_IRQ,
+	},
+	/*
+	 * We will pass IRQ_BASE to the driver now but this can be removed
+	 * when/if the driver starts to use intel_msic_irq_read().
+	 */
+	{
+		.name		= "IRQ_BASE",
+		.flags		= IORESOURCE_MEM,
+		.start		= MSIC_IRQ_STATUS_ACCDET,
+		.end		= MSIC_IRQ_STATUS_ACCDET,
+	},
+};
+
+static struct resource msic_hdmi_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_thermal_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_power_btn_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_ocd_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Devices that are part of the MSIC and are available via firmware
+ * populated SFI DEVS table.
+ */
+static struct mfd_cell msic_devs[] = {
+	[INTEL_MSIC_BLOCK_TOUCH]	= {
+		.name			= "msic_touch",
+		.num_resources		= ARRAY_SIZE(msic_touch_resources),
+		.resources		= msic_touch_resources,
+	},
+	[INTEL_MSIC_BLOCK_ADC]		= {
+		.name			= "msic_adc",
+		.num_resources		= ARRAY_SIZE(msic_adc_resources),
+		.resources		= msic_adc_resources,
+	},
+	[INTEL_MSIC_BLOCK_BATTERY]	= {
+		.name			= "msic_battery",
+		.num_resources		= ARRAY_SIZE(msic_battery_resources),
+		.resources		= msic_battery_resources,
+	},
+	[INTEL_MSIC_BLOCK_GPIO]		= {
+		.name			= "msic_gpio",
+		.num_resources		= ARRAY_SIZE(msic_gpio_resources),
+		.resources		= msic_gpio_resources,
+	},
+	[INTEL_MSIC_BLOCK_AUDIO]	= {
+		.name			= "msic_audio",
+		.num_resources		= ARRAY_SIZE(msic_audio_resources),
+		.resources		= msic_audio_resources,
+	},
+	[INTEL_MSIC_BLOCK_HDMI]		= {
+		.name			= "msic_hdmi",
+		.num_resources		= ARRAY_SIZE(msic_hdmi_resources),
+		.resources		= msic_hdmi_resources,
+	},
+	[INTEL_MSIC_BLOCK_THERMAL]	= {
+		.name			= "msic_thermal",
+		.num_resources		= ARRAY_SIZE(msic_thermal_resources),
+		.resources		= msic_thermal_resources,
+	},
+	[INTEL_MSIC_BLOCK_POWER_BTN]	= {
+		.name			= "msic_power_btn",
+		.num_resources		= ARRAY_SIZE(msic_power_btn_resources),
+		.resources		= msic_power_btn_resources,
+	},
+	[INTEL_MSIC_BLOCK_OCD]		= {
+		.name			= "msic_ocd",
+		.num_resources		= ARRAY_SIZE(msic_ocd_resources),
+		.resources		= msic_ocd_resources,
+	},
+};
+
+/*
+ * Other MSIC related devices which are not directly available via SFI DEVS
+ * table. These can be pseudo devices, regulators etc. which are needed for
+ * different purposes.
+ *
+ * These devices appear only after the MSIC driver itself is initialized so
+ * we can guarantee that the SCU IPC interface is ready.
+ */
+static struct mfd_cell msic_other_devs[] = {
+	/* Audio codec in the MSIC */
+	{
+		.id			= -1,
+		.name			= "sn95031",
+	},
+};
+
+/**
+ * intel_msic_reg_read - read a single MSIC register
+ * @reg: register to read
+ * @val: register value is placed here
+ *
+ * Read a single register from MSIC. Returns %0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_read(unsigned short reg, u8 *val)
+{
+	return intel_scu_ipc_ioread8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_read);
+
+/**
+ * intel_msic_reg_write - write a single MSIC register
+ * @reg: register to write
+ * @val: value to write to that register
+ *
+ * Write a single MSIC register. Returns 0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_write(unsigned short reg, u8 val)
+{
+	return intel_scu_ipc_iowrite8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_write);
+
+/**
+ * intel_msic_reg_update - update a single MSIC register
+ * @reg: register to update
+ * @val: value to write to the register
+ * @mask: specifies which of the bits are updated (%0 = don't update,
+ *        %1 = update)
+ *
+ * Perform an update to a register @reg. @mask is used to specify which
+ * bits are updated. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
+{
+	return intel_scu_ipc_update_register(reg, val, mask);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_update);
+
+/**
+ * intel_msic_bulk_read - read an array of registers
+ * @reg: array of register addresses to read
+ * @buf: array where the read values are placed
+ * @count: number of registers to read
+ *
+ * Function reads @count registers from the MSIC using addresses passed in
+ * @reg. Read values are placed in @buf. Reads are performed atomically
+ * wrt. MSIC.
+ *
+ * Returns %0 in case of success and negative errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_readv(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
+
+/**
+ * intel_msic_bulk_write - write an array of values to the MSIC registers
+ * @reg: array of registers to write
+ * @buf: values to write to each register
+ * @count: number of registers to write
+ *
+ * Function writes @count registers in @buf to MSIC. Writes are performed
+ * atomically wrt MSIC. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_writev(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
+
+/**
+ * intel_msic_irq_read - read a register from an MSIC interrupt tree
+ * @msic: MSIC instance
+ * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
+ *	 %INTEL_MSIC_RESETIRQ2)
+ * @val: value of the register is placed here
+ *
+ * This function can be used by an MSIC subdevice interrupt handler to read
+ * a register value from the MSIC interrupt tree. In this way subdevice
+ * drivers don't have to map in the interrupt tree themselves but can just
+ * call this function instead.
+ *
+ * Function doesn't sleep and is callable from interrupt context.
+ *
+ * Returns %-EINVAL if @reg is outside of the allowed register region.
+ */
+int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
+{
+	if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
+		return -EINVAL;
+
+	*val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_msic_irq_read);
+
+static int __devinit intel_msic_init_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+	int ret, i;
+
+	if (pdata->gpio) {
+		struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
+
+		cell->platform_data = pdata->gpio;
+		cell->pdata_size = sizeof(*pdata->gpio);
+	}
+
+	if (pdata->ocd) {
+		unsigned gpio = pdata->ocd->gpio;
+
+		ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
+			return ret;
+		}
+
+		ret = gpio_to_irq(gpio);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
+			gpio_free(gpio);
+			return ret;
+		}
+
+		/* Update the IRQ number for the OCD */
+		pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
+		if (!pdata->irq[i])
+			continue;
+
+		ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
+				      pdata->irq[i]);
+		if (ret)
+			goto fail;
+	}
+
+	ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
+			      ARRAY_SIZE(msic_other_devs), NULL, 0);
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	mfd_remove_devices(&pdev->dev);
+	if (pdata->ocd)
+		gpio_free(pdata->ocd->gpio);
+
+	return ret;
+}
+
+static void __devexit intel_msic_remove_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+
+	mfd_remove_devices(&pdev->dev);
+
+	if (pdata->ocd)
+		gpio_free(pdata->ocd->gpio);
+}
+
+static int __devinit intel_msic_probe(struct platform_device *pdev)
+{
+	struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+	struct intel_msic *msic;
+	struct resource *res;
+	u8 id0, id1;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data passed\n");
+		return -EINVAL;
+	}
+
+	/* First validate that we have an MSIC in place */
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
+		return -ENXIO;
+	}
+
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
+		return -ENXIO;
+	}
+
+	if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
+		dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
+		return -ENXIO;
+	}
+
+	msic = kzalloc(sizeof(*msic), GFP_KERNEL);
+	if (!msic)
+		return -ENOMEM;
+
+	msic->vendor = MSIC_VENDOR(id0);
+	msic->version = MSIC_VERSION(id0);
+	msic->pdev = pdev;
+
+	/*
+	 * Map in the MSIC interrupt tree area in SRAM. This is exposed to
+	 * the clients via intel_msic_irq_read().
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get SRAM iomem resource\n");
+		ret = -ENODEV;
+		goto fail_free_msic;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		ret = -EBUSY;
+		goto fail_free_msic;
+	}
+
+	msic->irq_base = ioremap_nocache(res->start, resource_size(res));
+	if (!msic->irq_base) {
+		dev_err(&pdev->dev, "failed to map SRAM memory\n");
+		ret = -ENOMEM;
+		goto fail_release_region;
+	}
+
+	platform_set_drvdata(pdev, msic);
+
+	ret = intel_msic_init_devices(msic);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
+		goto fail_unmap_mem;
+	}
+
+	dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
+		 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
+		 msic->vendor);
+
+	return 0;
+
+fail_unmap_mem:
+	iounmap(msic->irq_base);
+fail_release_region:
+	release_mem_region(res->start, resource_size(res));
+fail_free_msic:
+	kfree(msic);
+
+	return ret;
+}
+
+static int __devexit intel_msic_remove(struct platform_device *pdev)
+{
+	struct intel_msic *msic = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	intel_msic_remove_devices(msic);
+	platform_set_drvdata(pdev, NULL);
+	iounmap(msic->irq_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(msic);
+
+	return 0;
+}
+
+static struct platform_driver intel_msic_driver = {
+	.probe		= intel_msic_probe,
+	.remove		= __devexit_p(intel_msic_remove),
+	.driver		= {
+		.name	= "intel_msic",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init intel_msic_init(void)
+{
+	return platform_driver_register(&intel_msic_driver);
+}
+module_init(intel_msic_init);
+
+static void __exit intel_msic_exit(void)
+{
+	platform_driver_unregister(&intel_msic_driver);
+}
+module_exit(intel_msic_exit);
+
+MODULE_DESCRIPTION("Driver for Intel MSIC");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 563654c..1e9ee53 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -328,7 +328,7 @@
 	return 0;
 }
 
-struct platform_driver jz4740_adc_driver = {
+static struct platform_driver jz4740_adc_driver = {
 	.probe	= jz4740_adc_probe,
 	.remove = __devexit_p(jz4740_adc_remove),
 	.driver = {
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f83103b..5be53ae 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -23,7 +23,9 @@
 
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/max8997.h>
@@ -142,7 +144,6 @@
 
 	max8997->irq_base = pdata->irq_base;
 	max8997->ono = pdata->ono;
-	max8997->wakeup = pdata->wakeup;
 
 	mutex_init(&max8997->iolock);
 
@@ -169,6 +170,9 @@
 	if (ret < 0)
 		goto err_mfd;
 
+	/* MAX8997 has a power button input. */
+	device_init_wakeup(max8997->dev, pdata->wakeup);
+
 	return ret;
 
 err_mfd:
@@ -398,7 +402,29 @@
 	return 0;
 }
 
+static int max8997_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		irq_set_irq_wake(max8997->irq, 1);
+	return 0;
+}
+
+static int max8997_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		irq_set_irq_wake(max8997->irq, 0);
+	return max8997_irq_resume(max8997);
+}
+
 const struct dev_pm_ops max8997_pm = {
+	.suspend = max8997_suspend,
+	.resume = max8997_resume,
 	.freeze = max8997_freeze,
 	.restore = max8997_restore,
 };
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7e4d44b..e9619ac 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -26,20 +26,10 @@
 
 	irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
 	void *irqdata[MC13XXX_NUM_IRQ];
-};
-
-struct mc13783 {
-	struct mc13xxx mc13xxx;
 
 	int adcflags;
 };
 
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783)
-{
-	return &mc13783->mc13xxx;
-}
-EXPORT_SYMBOL(mc13783_to_mc13xxx);
-
 #define MC13XXX_IRQSTAT0	0
 #define MC13XXX_IRQSTAT0_ADCDONEI	(1 << 0)
 #define MC13XXX_IRQSTAT0_ADCBISDONEI	(1 << 1)
@@ -136,14 +126,14 @@
 #define MC13XXX_REVISION_FAB		(0x03 << 11)
 #define MC13XXX_REVISION_ICIDCODE	(0x3f << 13)
 
-#define MC13783_ADC1		44
-#define MC13783_ADC1_ADEN		(1 << 0)
-#define MC13783_ADC1_RAND		(1 << 1)
-#define MC13783_ADC1_ADSEL		(1 << 3)
-#define MC13783_ADC1_ASC		(1 << 20)
-#define MC13783_ADC1_ADTRIGIGN		(1 << 21)
+#define MC13XXX_ADC1		44
+#define MC13XXX_ADC1_ADEN		(1 << 0)
+#define MC13XXX_ADC1_RAND		(1 << 1)
+#define MC13XXX_ADC1_ADSEL		(1 << 3)
+#define MC13XXX_ADC1_ASC		(1 << 20)
+#define MC13XXX_ADC1_ADTRIGIGN		(1 << 21)
 
-#define MC13783_ADC2		45
+#define MC13XXX_ADC2		45
 
 #define MC13XXX_NUMREGS 0x3f
 
@@ -487,7 +477,7 @@
 	MC13XXX_ID_INVALID,
 };
 
-const char *mc13xxx_chipname[] = {
+static const char *mc13xxx_chipname[] = {
 	[MC13XXX_ID_MC13783] = "mc13783",
 	[MC13XXX_ID_MC13892] = "mc13892",
 };
@@ -558,8 +548,6 @@
 	return mc13xxx_chipname[devid->driver_data];
 }
 
-#include <linux/mfd/mc13783.h>
-
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
 {
 	struct mc13xxx_platform_data *pdata =
@@ -569,15 +557,15 @@
 }
 EXPORT_SYMBOL(mc13xxx_get_flags);
 
-#define MC13783_ADC1_CHAN0_SHIFT	5
-#define MC13783_ADC1_CHAN1_SHIFT	8
+#define MC13XXX_ADC1_CHAN0_SHIFT	5
+#define MC13XXX_ADC1_CHAN1_SHIFT	8
 
 struct mc13xxx_adcdone_data {
 	struct mc13xxx *mc13xxx;
 	struct completion done;
 };
 
-static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
+static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
 {
 	struct mc13xxx_adcdone_data *adcdone_data = data;
 
@@ -588,12 +576,11 @@
 	return IRQ_HANDLED;
 }
 
-#define MC13783_ADC_WORKING (1 << 0)
+#define MC13XXX_ADC_WORKING (1 << 0)
 
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		unsigned int channel, unsigned int *sample)
 {
-	struct mc13xxx *mc13xxx = &mc13783->mc13xxx;
 	u32 adc0, adc1, old_adc0;
 	int i, ret;
 	struct mc13xxx_adcdone_data adcdone_data = {
@@ -605,51 +592,51 @@
 
 	mc13xxx_lock(mc13xxx);
 
-	if (mc13783->adcflags & MC13783_ADC_WORKING) {
+	if (mc13xxx->adcflags & MC13XXX_ADC_WORKING) {
 		ret = -EBUSY;
 		goto out;
 	}
 
-	mc13783->adcflags |= MC13783_ADC_WORKING;
+	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13783_ADC0, &old_adc0);
+	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
 
-	adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
-	adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN | MC13783_ADC1_ASC;
+	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
 
 	if (channel > 7)
-		adc1 |= MC13783_ADC1_ADSEL;
+		adc1 |= MC13XXX_ADC1_ADSEL;
 
 	switch (mode) {
-	case MC13783_ADC_MODE_TS:
-		adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_TSMOD0 |
-			MC13783_ADC0_TSMOD1;
-		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+	case MC13XXX_ADC_MODE_TS:
+		adc0 |= MC13XXX_ADC0_ADREFEN | MC13XXX_ADC0_TSMOD0 |
+			MC13XXX_ADC0_TSMOD1;
+		adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
 		break;
 
-	case MC13783_ADC_MODE_SINGLE_CHAN:
-		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
-		adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
-		adc1 |= MC13783_ADC1_RAND;
+	case MC13XXX_ADC_MODE_SINGLE_CHAN:
+		adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+		adc1 |= (channel & 0x7) << MC13XXX_ADC1_CHAN0_SHIFT;
+		adc1 |= MC13XXX_ADC1_RAND;
 		break;
 
-	case MC13783_ADC_MODE_MULT_CHAN:
-		adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
-		adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+	case MC13XXX_ADC_MODE_MULT_CHAN:
+		adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+		adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
 		break;
 
 	default:
-		mc13783_unlock(mc13783);
+		mc13xxx_unlock(mc13xxx);
 		return -EINVAL;
 	}
 
-	dev_dbg(&mc13783->mc13xxx.spidev->dev, "%s: request irq\n", __func__);
-	mc13xxx_irq_request(mc13xxx, MC13783_IRQ_ADCDONE,
-			mc13783_handler_adcdone, __func__, &adcdone_data);
-	mc13xxx_irq_ack(mc13xxx, MC13783_IRQ_ADCDONE);
+	dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
+	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+			mc13xxx_handler_adcdone, __func__, &adcdone_data);
+	mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_ADCDONE);
 
-	mc13xxx_reg_write(mc13xxx, MC13783_ADC0, adc0);
-	mc13xxx_reg_write(mc13xxx, MC13783_ADC1, adc1);
+	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
+	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
 
 	mc13xxx_unlock(mc13xxx);
 
@@ -660,27 +647,27 @@
 
 	mc13xxx_lock(mc13xxx);
 
-	mc13xxx_irq_free(mc13xxx, MC13783_IRQ_ADCDONE, &adcdone_data);
+	mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_ADCDONE, &adcdone_data);
 
 	if (ret > 0)
 		for (i = 0; i < 4; ++i) {
 			ret = mc13xxx_reg_read(mc13xxx,
-					MC13783_ADC2, &sample[i]);
+					MC13XXX_ADC2, &sample[i]);
 			if (ret)
 				break;
 		}
 
-	if (mode == MC13783_ADC_MODE_TS)
+	if (mode == MC13XXX_ADC_MODE_TS)
 		/* restore TSMOD */
-		mc13xxx_reg_write(mc13xxx, MC13783_ADC0, old_adc0);
+		mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, old_adc0);
 
-	mc13783->adcflags &= ~MC13783_ADC_WORKING;
+	mc13xxx->adcflags &= ~MC13XXX_ADC_WORKING;
 out:
 	mc13xxx_unlock(mc13xxx);
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+EXPORT_SYMBOL_GPL(mc13xxx_adc_do_conversion);
 
 static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx,
 		const char *format, void *pdata, size_t pdata_size)
@@ -716,6 +703,11 @@
 	enum mc13xxx_id id;
 	int ret;
 
+	if (!pdata) {
+		dev_err(&spi->dev, "invalid platform data\n");
+		return -EINVAL;
+	}
+
 	mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
 	if (!mc13xxx)
 		return -ENOMEM;
@@ -763,10 +755,8 @@
 	if (pdata->flags & MC13XXX_USE_CODEC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-codec");
 
-	if (pdata->flags & MC13XXX_USE_REGULATOR) {
-		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
-				&pdata->regulators, sizeof(pdata->regulators));
-	}
+	mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
+		&pdata->regulators, sizeof(pdata->regulators));
 
 	if (pdata->flags & MC13XXX_USE_RTC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
@@ -774,10 +764,14 @@
 	if (pdata->flags & MC13XXX_USE_TOUCHSCREEN)
 		mc13xxx_add_subdevice(mc13xxx, "%s-ts");
 
-	if (pdata->flags & MC13XXX_USE_LED)
+	if (pdata->leds)
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led",
 				pdata->leds, sizeof(*pdata->leds));
 
+	if (pdata->buttons)
+		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
+				pdata->buttons, sizeof(*pdata->buttons));
+
 	return 0;
 }
 
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index af5d9d0..cb4910a 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1226,7 +1226,7 @@
 	menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
 
 	if (client->irq > 0) {
-		err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+		err = request_irq(client->irq, menelaus_irq, 0,
 				  DRIVER_NAME, menelaus);
 		if (err) {
 			dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 0902523..0f59228 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -17,6 +17,7 @@
 #include <linux/mfd/core.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 int mfd_cell_enable(struct platform_device *pdev)
 {
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 57868416..ff1a7e7 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -23,45 +23,22 @@
 #include <linux/i2c.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
 
 #include <linux/mfd/pcf50633/core.h>
 
-static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
-	int ret;
-
-	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
-				num, data);
-	if (ret < 0)
-		dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
-
-	return ret;
-}
-
-static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
-	int ret;
-
-	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
-				num, data);
-	if (ret < 0)
-		dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
-
-	return ret;
-
-}
-
 /* Read a block of up to 32 regs  */
 int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 					int nr_regs, u8 *data)
 {
 	int ret;
 
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, nr_regs, data);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_raw_read(pcf->regmap, reg, data, nr_regs);
+	if (ret != 0)
+		return ret;
 
-	return ret;
+	return nr_regs;
 }
 EXPORT_SYMBOL_GPL(pcf50633_read_block);
 
@@ -71,21 +48,22 @@
 {
 	int ret;
 
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_write(pcf, reg, nr_regs, data);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
+	if (ret != 0)
+		return ret;
 
-	return ret;
+	return nr_regs;
 }
 EXPORT_SYMBOL_GPL(pcf50633_write_block);
 
 u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
 {
-	u8 val;
+	unsigned int val;
+	int ret;
 
-	mutex_lock(&pcf->lock);
-	__pcf50633_read(pcf, reg, 1, &val);
-	mutex_unlock(&pcf->lock);
+	ret = regmap_read(pcf->regmap, reg, &val);
+	if (ret < 0)
+		return -1;
 
 	return val;
 }
@@ -93,56 +71,19 @@
 
 int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
 {
-	int ret;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_write(pcf, reg, 1, &val);
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_write(pcf->regmap, reg, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_write);
 
 int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
 {
-	int ret;
-	u8 tmp;
-
-	val &= mask;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, 1, &tmp);
-	if (ret < 0)
-		goto out;
-
-	tmp &= ~mask;
-	tmp |= val;
-	ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_update_bits(pcf->regmap, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
 
 int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
 {
-	int ret;
-	u8 tmp;
-
-	mutex_lock(&pcf->lock);
-	ret = __pcf50633_read(pcf, reg, 1, &tmp);
-	if (ret < 0)
-		goto out;
-
-	tmp &= ~val;
-	ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
-	mutex_unlock(&pcf->lock);
-
-	return ret;
+	return regmap_update_bits(pcf->regmap, reg, val, 0);
 }
 EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
 
@@ -251,6 +192,11 @@
 
 static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
 
+static struct regmap_config pcf50633_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
 static int __devinit pcf50633_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
@@ -272,16 +218,23 @@
 
 	mutex_init(&pcf->lock);
 
+	pcf->regmap = regmap_init_i2c(client, &pcf50633_regmap_config);
+	if (IS_ERR(pcf->regmap)) {
+		ret = PTR_ERR(pcf->regmap);
+		dev_err(pcf->dev, "Failed to allocate register map: %d\n",
+			ret);
+		goto err_free;
+	}
+
 	i2c_set_clientdata(client, pcf);
 	pcf->dev = &client->dev;
-	pcf->i2c_client = client;
 
 	version = pcf50633_reg_read(pcf, 0);
 	variant = pcf50633_reg_read(pcf, 1);
 	if (version < 0 || variant < 0) {
 		dev_err(pcf->dev, "Unable to probe pcf50633\n");
 		ret = -ENODEV;
-		goto err_free;
+		goto err_regmap;
 	}
 
 	dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -328,6 +281,8 @@
 
 	return 0;
 
+err_regmap:
+	regmap_exit(pcf->regmap);
 err_free:
 	kfree(pcf);
 
@@ -351,6 +306,7 @@
 	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
 		platform_device_unregister(pcf->regulator_pdev[i]);
 
+	regmap_exit(pcf->regmap);
 	kfree(pcf);
 
 	return 0;
diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c
index 1b0192f..048a3b9 100644
--- a/drivers/mfd/pcf50633-irq.c
+++ b/drivers/mfd/pcf50633-irq.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include <linux/mfd/pcf50633/core.h>
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index c27e515..de97974 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -357,6 +357,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int tc3589x_suspend(struct device *dev)
 {
 	struct tc3589x *tc3589x = dev_get_drvdata(dev);
@@ -387,6 +388,7 @@
 
 static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
 						tc3589x_resume);
+#endif
 
 static const struct i2c_device_id tc3589x_id[] = {
 	{ "tc3589x", 24 },
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 696879e..02d6569 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -697,7 +697,7 @@
 		dev_err(&dev->dev, "The driver supports an older "
 			"version of the FPGA, please update the driver to "
 			"support %d.%d\n", priv->fw.major, priv->fw.minor);
-		goto err_ioremap;
+		goto err_config;
 	}
 	if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
 		priv->fw.minor < TIMB_REQUIRED_MINOR) {
@@ -705,13 +705,13 @@
 			"please upgrade the FPGA to at least: %d.%d\n",
 			priv->fw.major, priv->fw.minor,
 			TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
-		goto err_ioremap;
+		goto err_config;
 	}
 
 	msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
 		GFP_KERNEL);
 	if (!msix_entries)
-		goto err_ioremap;
+		goto err_config;
 
 	for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
 		msix_entries[i].entry = i;
@@ -825,6 +825,8 @@
 err_create_file:
 	pci_disable_msix(dev);
 err_msix:
+	kfree(msix_entries);
+err_config:
 	iounmap(priv->ctl_membase);
 err_ioremap:
 	release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
@@ -833,7 +835,6 @@
 err_start:
 	pci_disable_device(dev);
 err_enable:
-	kfree(msix_entries);
 	kfree(priv);
 	pci_set_drvdata(dev, NULL);
 	return -ENODEV;
diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
index eddc19a..83af78c 100644
--- a/drivers/mfd/tmio_core.c
+++ b/drivers/mfd/tmio_core.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <linux/mfd/tmio.h>
 
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 955bc00..5fec23a 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -131,9 +131,6 @@
 	if (init_data == NULL)
 		return -ENOMEM;
 
-	init_data->irq = pmic_plat_data->irq;
-	init_data->irq_base = pmic_plat_data->irq;
-
 	mutex_init(&tps65912->io_mutex);
 	dev_set_drvdata(tps65912->dev, tps65912);
 
@@ -153,10 +150,13 @@
 	if (ret < 0)
 		goto err;
 
+	init_data->irq = pmic_plat_data->irq;
+	init_data->irq_base = pmic_plat_data->irq;
 	ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
 	if (ret < 0)
 		goto err;
 
+	kfree(init_data);
 	return ret;
 
 err:
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 01ecfee..bfbd660 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -30,6 +30,7 @@
 
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -109,7 +110,7 @@
 #define twl_has_watchdog()        false
 #endif
 
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
 	defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
 #define twl_has_codec()	true
 #else
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 8a7ee31..f062c8c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/kthread.h>
 #include <linux/slab.h>
 
 #include <linux/i2c/twl.h>
@@ -278,59 +277,6 @@
 
 static unsigned twl4030_irq_base;
 
-static struct completion irq_event;
-
-/*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
- */
-static int twl4030_irq_thread(void *data)
-{
-	long irq = (long)data;
-	static unsigned i2c_errors;
-	static const unsigned max_i2c_errors = 100;
-
-
-	current->flags |= PF_NOFREEZE;
-
-	while (!kthread_should_stop()) {
-		int ret;
-		int module_irq;
-		u8 pih_isr;
-
-		/* Wait for IRQ, then read PIH irq status (also blocking) */
-		wait_for_completion_interruptible(&irq_event);
-
-		ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
-					  REG_PIH_ISR_P1);
-		if (ret) {
-			pr_warning("twl4030: I2C error %d reading PIH ISR\n",
-					ret);
-			if (++i2c_errors >= max_i2c_errors) {
-				printk(KERN_ERR "Maximum I2C error count"
-						" exceeded.  Terminating %s.\n",
-						__func__);
-				break;
-			}
-			complete(&irq_event);
-			continue;
-		}
-
-		/* these handlers deal with the relevant SIH irq status */
-		local_irq_disable();
-		for (module_irq = twl4030_irq_base;
-				pih_isr;
-				pih_isr >>= 1, module_irq++) {
-			if (pih_isr & 0x1)
-				generic_handle_irq(module_irq);
-		}
-		local_irq_enable();
-
-		enable_irq(irq);
-	}
-
-	return 0;
-}
-
 /*
  * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
  * This is a chained interrupt, so there is no desc->action method for it.
@@ -342,9 +288,25 @@
  */
 static irqreturn_t handle_twl4030_pih(int irq, void *devid)
 {
-	/* Acknowledge, clear *AND* mask the interrupt... */
-	disable_irq_nosync(irq);
-	complete(devid);
+	int		module_irq;
+	irqreturn_t	ret;
+	u8		pih_isr;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+			REG_PIH_ISR_P1);
+	if (ret) {
+		pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);
+		return IRQ_NONE;
+	}
+
+	/* these handlers deal with the relevant SIH irq status */
+	for (module_irq = twl4030_irq_base;
+			pih_isr;
+			pih_isr >>= 1, module_irq++) {
+		if (pih_isr & 0x1)
+			handle_nested_irq(module_irq);
+	}
+
 	return IRQ_HANDLED;
 }
 /*----------------------------------------------------------------------*/
@@ -460,114 +422,18 @@
 
 /*----------------------------------------------------------------------*/
 
-static DEFINE_SPINLOCK(sih_agent_lock);
-
-static struct workqueue_struct *wq;
-
 struct sih_agent {
 	int			irq_base;
 	const struct sih	*sih;
 
 	u32			imr;
 	bool			imr_change_pending;
-	struct work_struct	mask_work;
 
 	u32			edge_change;
-	struct work_struct	edge_work;
+
+	struct mutex		irq_lock;
 };
 
-static void twl4030_sih_do_mask(struct work_struct *work)
-{
-	struct sih_agent	*agent;
-	const struct sih	*sih;
-	union {
-		u8	bytes[4];
-		u32	word;
-	}			imr;
-	int			status;
-
-	agent = container_of(work, struct sih_agent, mask_work);
-
-	/* see what work we have */
-	spin_lock_irq(&sih_agent_lock);
-	if (agent->imr_change_pending) {
-		sih = agent->sih;
-		/* byte[0] gets overwritten as we write ... */
-		imr.word = cpu_to_le32(agent->imr << 8);
-		agent->imr_change_pending = false;
-	} else
-		sih = NULL;
-	spin_unlock_irq(&sih_agent_lock);
-	if (!sih)
-		return;
-
-	/* write the whole mask ... simpler than subsetting it */
-	status = twl_i2c_write(sih->module, imr.bytes,
-			sih->mask[irq_line].imr_offset, sih->bytes_ixr);
-	if (status)
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"write", status);
-}
-
-static void twl4030_sih_do_edge(struct work_struct *work)
-{
-	struct sih_agent	*agent;
-	const struct sih	*sih;
-	u8			bytes[6];
-	u32			edge_change;
-	int			status;
-
-	agent = container_of(work, struct sih_agent, edge_work);
-
-	/* see what work we have */
-	spin_lock_irq(&sih_agent_lock);
-	edge_change = agent->edge_change;
-	agent->edge_change = 0;
-	sih = edge_change ? agent->sih : NULL;
-	spin_unlock_irq(&sih_agent_lock);
-	if (!sih)
-		return;
-
-	/* Read, reserving first byte for write scratch.  Yes, this
-	 * could be cached for some speedup ... but be careful about
-	 * any processor on the other IRQ line, EDR registers are
-	 * shared.
-	 */
-	status = twl_i2c_read(sih->module, bytes + 1,
-			sih->edr_offset, sih->bytes_edr);
-	if (status) {
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"read", status);
-		return;
-	}
-
-	/* Modify only the bits we know must change */
-	while (edge_change) {
-		int		i = fls(edge_change) - 1;
-		struct irq_data	*idata = irq_get_irq_data(i + agent->irq_base);
-		int		byte = 1 + (i >> 2);
-		int		off = (i & 0x3) * 2;
-		unsigned int	type;
-
-		bytes[byte] &= ~(0x03 << off);
-
-		type = irqd_get_trigger_type(idata);
-		if (type & IRQ_TYPE_EDGE_RISING)
-			bytes[byte] |= BIT(off + 1);
-		if (type & IRQ_TYPE_EDGE_FALLING)
-			bytes[byte] |= BIT(off + 0);
-
-		edge_change &= ~BIT(i);
-	}
-
-	/* Write */
-	status = twl_i2c_write(sih->module, bytes,
-			sih->edr_offset, sih->bytes_edr);
-	if (status)
-		pr_err("twl4030: %s, %s --> %d\n", __func__,
-				"write", status);
-}
-
 /*----------------------------------------------------------------------*/
 
 /*
@@ -579,50 +445,125 @@
 
 static void twl4030_sih_mask(struct irq_data *data)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
 
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	sih->imr |= BIT(data->irq - sih->irq_base);
-	sih->imr_change_pending = true;
-	queue_work(wq, &sih->mask_work);
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	agent->imr |= BIT(data->irq - agent->irq_base);
+	agent->imr_change_pending = true;
 }
 
 static void twl4030_sih_unmask(struct irq_data *data)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
 
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	sih->imr &= ~BIT(data->irq - sih->irq_base);
-	sih->imr_change_pending = true;
-	queue_work(wq, &sih->mask_work);
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	agent->imr &= ~BIT(data->irq - agent->irq_base);
+	agent->imr_change_pending = true;
 }
 
 static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
 {
-	struct sih_agent *sih = irq_data_get_irq_chip_data(data);
-	unsigned long flags;
+	struct sih_agent *agent = irq_data_get_irq_chip_data(data);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
 
-	spin_lock_irqsave(&sih_agent_lock, flags);
-	if (irqd_get_trigger_type(data) != trigger) {
-		sih->edge_change |= BIT(data->irq - sih->irq_base);
-		queue_work(wq, &sih->edge_work);
-	}
-	spin_unlock_irqrestore(&sih_agent_lock, flags);
+	if (irqd_get_trigger_type(data) != trigger)
+		agent->edge_change |= BIT(data->irq - agent->irq_base);
+
 	return 0;
 }
 
+static void twl4030_sih_bus_lock(struct irq_data *data)
+{
+	struct sih_agent	*agent = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&agent->irq_lock);
+}
+
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
+{
+	struct sih_agent	*agent = irq_data_get_irq_chip_data(data);
+	const struct sih	*sih = agent->sih;
+	int			status;
+
+	if (agent->imr_change_pending) {
+		union {
+			u32	word;
+			u8	bytes[4];
+		} imr;
+
+		/* byte[0] gets overwriten as we write ... */
+		imr.word = cpu_to_le32(agent->imr << 8);
+		agent->imr_change_pending = false;
+
+		/* write the whole mask ... simpler than subsetting it */
+		status = twl_i2c_write(sih->module, imr.bytes,
+				sih->mask[irq_line].imr_offset,
+				sih->bytes_ixr);
+		if (status)
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"write", status);
+	}
+
+	if (agent->edge_change) {
+		u32		edge_change;
+		u8		bytes[6];
+
+		edge_change = agent->edge_change;
+		agent->edge_change = 0;
+
+		/*
+		 * Read, reserving first byte for write scratch.  Yes, this
+		 * could be cached for some speedup ... but be careful about
+		 * any processor on the other IRQ line, EDR registers are
+		 * shared.
+		 */
+		status = twl_i2c_read(sih->module, bytes + 1,
+				sih->edr_offset, sih->bytes_edr);
+		if (status) {
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"read", status);
+			return;
+		}
+
+		/* Modify only the bits we know must change */
+		while (edge_change) {
+			int		i = fls(edge_change) - 1;
+			struct irq_data	*idata;
+			int		byte = 1 + (i >> 2);
+			int		off = (i & 0x3) * 2;
+			unsigned int	type;
+
+			idata = irq_get_irq_data(i + agent->irq_base);
+
+			bytes[byte] &= ~(0x03 << off);
+
+			type = irqd_get_trigger_type(idata);
+			if (type & IRQ_TYPE_EDGE_RISING)
+				bytes[byte] |= BIT(off + 1);
+			if (type & IRQ_TYPE_EDGE_FALLING)
+				bytes[byte] |= BIT(off + 0);
+
+			edge_change &= ~BIT(i);
+		}
+
+		/* Write */
+		status = twl_i2c_write(sih->module, bytes,
+				sih->edr_offset, sih->bytes_edr);
+		if (status)
+			pr_err("twl4030: %s, %s --> %d\n", __func__,
+					"write", status);
+	}
+
+	mutex_unlock(&agent->irq_lock);
+}
+
 static struct irq_chip twl4030_sih_irq_chip = {
 	.name		= "twl4030",
-	.irq_mask      	= twl4030_sih_mask,
+	.irq_mask	= twl4030_sih_mask,
 	.irq_unmask	= twl4030_sih_unmask,
 	.irq_set_type	= twl4030_sih_set_type,
+	.irq_bus_lock	= twl4030_sih_bus_lock,
+	.irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
 };
 
 /*----------------------------------------------------------------------*/
@@ -655,9 +596,7 @@
 	int isr;
 
 	/* reading ISR acks the IRQs, using clear-on-read mode */
-	local_irq_enable();
 	isr = sih_read_isr(sih);
-	local_irq_disable();
 
 	if (isr < 0) {
 		pr_err("twl4030: %s SIH, read ISR error %d\n",
@@ -672,7 +611,7 @@
 		isr &= ~BIT(irq);
 
 		if (irq < sih->bits)
-			generic_handle_irq(agent->irq_base + irq);
+			handle_nested_irq(agent->irq_base + irq);
 		else
 			pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
 				sih->name, irq);
@@ -718,15 +657,14 @@
 	agent->irq_base = irq_base;
 	agent->sih = sih;
 	agent->imr = ~0;
-	INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
-	INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+	mutex_init(&agent->irq_lock);
 
 	for (i = 0; i < sih->bits; i++) {
 		irq = irq_base + i;
 
+		irq_set_chip_data(irq, agent);
 		irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
 					 handle_edge_irq);
-		irq_set_chip_data(irq, agent);
 		activate_irq(irq);
 	}
 
@@ -758,7 +696,6 @@
 
 	int			status;
 	int			i;
-	struct task_struct	*task;
 
 	/*
 	 * Mask and clear all TWL4030 interrupts since initially we do
@@ -768,12 +705,6 @@
 	if (status < 0)
 		return status;
 
-	wq = create_singlethread_workqueue("twl4030-irqchip");
-	if (!wq) {
-		pr_err("twl4030: workqueue FAIL\n");
-		return -ESRCH;
-	}
-
 	twl4030_irq_base = irq_base;
 
 	/* install an irq handler for each of the SIH modules;
@@ -787,6 +718,7 @@
 	for (i = irq_base; i < irq_end; i++) {
 		irq_set_chip_and_handler(i, &twl4030_irq_chip,
 					 handle_simple_irq);
+		irq_set_nested_thread(i, 1);
 		activate_irq(i);
 	}
 	twl4030_irq_next = i;
@@ -801,34 +733,22 @@
 	}
 
 	/* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
-	init_completion(&irq_event);
-
-	status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
-				"TWL4030-PIH", &irq_event);
+	status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0,
+					"TWL4030-PIH", NULL);
 	if (status < 0) {
 		pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
 		goto fail_rqirq;
 	}
 
-	task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
-								"twl4030-irq");
-	if (IS_ERR(task)) {
-		pr_err("twl4030: could not create irq %d thread!\n", irq_num);
-		status = PTR_ERR(task);
-		goto fail_kthread;
-	}
 	return status;
-fail_kthread:
-	free_irq(irq_num, &irq_event);
 fail_rqirq:
 	/* clean up twl4030_sih_setup */
 fail:
-	for (i = irq_base; i < irq_end; i++)
+	for (i = irq_base; i < irq_end; i++) {
+		irq_set_nested_thread(i, 0);
 		irq_set_chip_and_handler(i, NULL, NULL);
-	destroy_workqueue(wq);
-	wq = NULL;
+	}
+
 	return status;
 }
 
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 7cbf2aa..834f824 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -740,6 +740,28 @@
 			TWL4030_BCI_BCICTL1);
 		goto err_i2c;
 	}
+
+	/* Check that MADC clock is on */
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &regval, TWL4030_REG_GPBR1);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
+				TWL4030_REG_GPBR1);
+		goto err_i2c;
+	}
+
+	/* If MADC clk is not on, turn it on */
+	if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
+		dev_info(&pdev->dev, "clk disabled, enabling\n");
+		regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
+		ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
+				       TWL4030_REG_GPBR1);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
+					TWL4030_REG_GPBR1);
+			goto err_i2c;
+		}
+	}
+
 	platform_set_drvdata(pdev, madc);
 	mutex_init(&madc->lock);
 	ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index eb3b5f8..3eee45f 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -32,11 +32,13 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kthread.h>
 #include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
+#include <linux/suspend.h>
 
 #include "twl-core.h"
 
@@ -83,8 +85,48 @@
 /*----------------------------------------------------------------------*/
 
 static unsigned twl6030_irq_base;
+static int twl_irq;
+static bool twl_irq_wake_enabled;
 
 static struct completion irq_event;
+static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+				   unsigned long pm_event, void *unused)
+{
+	int chained_wakeups;
+
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		chained_wakeups = atomic_read(&twl6030_wakeirqs);
+
+		if (chained_wakeups && !twl_irq_wake_enabled) {
+			if (enable_irq_wake(twl_irq))
+				pr_err("twl6030 IRQ wake enable failed\n");
+			else
+				twl_irq_wake_enabled = true;
+		} else if (!chained_wakeups && twl_irq_wake_enabled) {
+			disable_irq_wake(twl_irq);
+			twl_irq_wake_enabled = false;
+		}
+
+		disable_irq(twl_irq);
+		break;
+
+	case PM_POST_SUSPEND:
+		enable_irq(twl_irq);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block twl6030_irq_pm_notifier_block = {
+	.notifier_call = twl6030_irq_pm_notifier,
+};
 
 /*
  * This thread processes interrupts reported by the Primary Interrupt Handler.
@@ -187,6 +229,16 @@
 #endif
 }
 
+int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	if (on)
+		atomic_inc(&twl6030_wakeirqs);
+	else
+		atomic_dec(&twl6030_wakeirqs);
+
+	return 0;
+}
+
 /*----------------------------------------------------------------------*/
 
 static unsigned twl6030_irq_next;
@@ -318,10 +370,12 @@
 	twl6030_irq_chip = dummy_irq_chip;
 	twl6030_irq_chip.name = "twl6030";
 	twl6030_irq_chip.irq_set_type = NULL;
+	twl6030_irq_chip.irq_set_wake = twl6030_irq_set_wake;
 
 	for (i = irq_base; i < irq_end; i++) {
 		irq_set_chip_and_handler(i, &twl6030_irq_chip,
 					 handle_simple_irq);
+		irq_set_chip_data(i, (void *)irq_num);
 		activate_irq(i);
 	}
 
@@ -331,6 +385,14 @@
 
 	/* install an irq handler to demultiplex the TWL6030 interrupt */
 	init_completion(&irq_event);
+
+	status = request_irq(irq_num, handle_twl6030_pih, 0,
+				"TWL6030-PIH", &irq_event);
+	if (status < 0) {
+		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+		goto fail_irq;
+	}
+
 	task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
 	if (IS_ERR(task)) {
 		pr_err("twl6030: could not create irq %d thread!\n", irq_num);
@@ -338,17 +400,14 @@
 		goto fail_kthread;
 	}
 
-	status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
-				"TWL6030-PIH", &irq_event);
-	if (status < 0) {
-		pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
-		goto fail_irq;
-	}
+	twl_irq = irq_num;
+	register_pm_notifier(&twl6030_irq_pm_notifier_block);
 	return status;
-fail_irq:
-	free_irq(irq_num, &irq_event);
 
 fail_kthread:
+	free_irq(irq_num, &irq_event);
+
+fail_irq:
 	for (i = irq_base; i < irq_end; i++)
 		irq_set_chip_and_handler(i, NULL, NULL);
 	return status;
@@ -356,6 +415,7 @@
 
 int twl6030_exit_irq(void)
 {
+	unregister_pm_notifier(&twl6030_irq_pm_notifier_block);
 
 	if (twl6030_irq_base) {
 		pr_err("twl6030: can't yet clean up IRQs?\n");
diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c
index d97a869..f39b756 100644
--- a/drivers/mfd/wl1273-core.c
+++ b/drivers/mfd/wl1273-core.c
@@ -22,6 +22,7 @@
 
 #include <linux/mfd/wl1273-core.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_DESC "WL1273 FM Radio Core"
 
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index ada1835..f4747a4 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -420,12 +420,19 @@
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
+		wm831x->gpio_level[irq] = false;
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+		wm831x->gpio_level[irq] = false;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		wm831x->gpio_update[irq] = 0x10000;
+		wm831x->gpio_level[irq] = false;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+		wm831x->gpio_level[irq] = true;
 		break;
 	default:
 		return -EINVAL;
@@ -449,7 +456,7 @@
 {
 	struct wm831x *wm831x = data;
 	unsigned int i;
-	int primary, status_addr;
+	int primary, status_addr, ret;
 	int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
 	int read[WM831X_NUM_IRQ_REGS] = { 0 };
 	int *status;
@@ -507,6 +514,19 @@
 
 		if (*status & wm831x_irqs[i].mask)
 			handle_nested_irq(wm831x->irq_base + i);
+
+		/* Simulate an edge triggered IRQ by polling the input
+		 * status.  This is sucky but improves interoperability.
+		 */
+		if (primary == WM831X_GP_INT &&
+		    wm831x->gpio_level[i - WM831X_IRQ_GPIO_1]) {
+			ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+			while (ret & 1 << (i - WM831X_IRQ_GPIO_1)) {
+				handle_nested_irq(wm831x->irq_base + i);
+				ret = wm831x_reg_read(wm831x,
+						      WM831X_GPIO_LEVEL);
+			}
+		}
 	}
 
 out:
@@ -596,8 +616,6 @@
 			 "No interrupt specified - functionality limited\n");
 	}
 
-
-
 	/* Enable top level interrupts, we mask at secondary level */
 	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
 
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e06ba94..62b4626 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -12,6 +12,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index b03be1d..5d6ba13 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -217,6 +217,47 @@
 		return 0;
 	}
 
+	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read power status: %d\n", ret);
+	} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
+			  WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
+			  WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
+		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+		return 0;
+	}
+
+	ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read power status: %d\n", ret);
+	} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+			  WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
+			  WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
+		dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+		return 0;
+	}
+
+	switch (wm8994->type) {
+	case WM8958:
+		ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
+		if (ret < 0) {
+			dev_err(dev, "Failed to read power status: %d\n", ret);
+		} else if (ret & WM8958_MICD_ENA) {
+			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+			return 0;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* Disable LDO pulldowns while the device is suspended if we
+	 * don't know that something will be driving them. */
+	if (!wm8994->ldo_ena_always_driven)
+		wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
+
 	/* GPIO configuration state is saved here since we may be configuring
 	 * the GPIO alternate functions even if we're not using the gpiolib
 	 * driver for them.
@@ -286,6 +327,11 @@
 	if (ret < 0)
 		dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
 
+	/* Disable LDO pulldowns while the device is active */
+	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+			0);
+
 	wm8994->suspended = false;
 
 	return 0;
@@ -467,8 +513,15 @@
 						pdata->gpio_defaults[i]);
 			}
 		}
+
+		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
 	}
 
+	/* Disable LDO pulldowns while the device is active */
+	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+			0);
+
 	/* In some system designs where the regulators are not in use,
 	 * we can achieve a small reduction in leakage currents by
 	 * floating LDO outputs.  This bit makes no difference if the
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d593878..5664696 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -472,7 +472,7 @@
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -480,12 +480,13 @@
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor's IOH,
+	  ML7213/ML7223/ML7831.
+	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c
index 3590315..2208a9d 100644
--- a/drivers/misc/ab8500-pwm.c
+++ b/drivers/misc/ab8500-pwm.c
@@ -10,6 +10,7 @@
 #include <linux/pwm.h>
 #include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
+#include <linux/module.h>
 
 /*
  * PWM Out generators
diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
index a662f59..82b2cb7 100644
--- a/drivers/misc/ad525x_dpot.h
+++ b/drivers/misc/ad525x_dpot.h
@@ -100,7 +100,7 @@
 	AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
 	AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
 			BRDAC0, 7, 28),
-	AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+	AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
 			BRDAC0, 8, 29),
 	AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
 			BRDAC0 | BRDAC1, 8, 30),
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 769a4e8..5bb1877 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -16,6 +16,7 @@
 #include <linux/spinlock.h>
 #include <linux/atmel-ssc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 /* Serialize access to ssc_list and user count */
 static DEFINE_SPINLOCK(user_lock);
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index a844810..4bcfc37 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -7,6 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 /* Number of bytes to reserve for the iomem resource */
 #define ATMEL_TC_IOMEM_SIZE	256
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 82fe2d0..bfeea9b 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -22,6 +22,7 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #define BH1780_REG_CONTROL	0x80
 #define BH1780_REG_PARTID	0x8A
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
index 7ce6065..eb5cd28 100644
--- a/drivers/misc/carma/carma-fpga-program.c
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -945,8 +945,7 @@
 /* CTL-CPLD Version Register */
 #define CTL_CPLD_VERSION	0x2000
 
-static int fpga_of_probe(struct platform_device *op,
-			 const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
 {
 	struct device_node *of_node = op->dev.of_node;
 	struct device *this_device;
@@ -1107,7 +1106,7 @@
 	{},
 };
 
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
 	.probe		= fpga_of_probe,
 	.remove		= fpga_of_remove,
 	.driver		= {
@@ -1124,12 +1123,12 @@
 static int __init fpga_init(void)
 {
 	led_trigger_register_simple("fpga", &ledtrig_fpga);
-	return of_register_platform_driver(&fpga_of_driver);
+	return platform_driver_register(&fpga_of_driver);
 }
 
 static void __exit fpga_exit(void)
 {
-	of_unregister_platform_driver(&fpga_of_driver);
+	platform_driver_unregister(&fpga_of_driver);
 	led_trigger_unregister_simple(ledtrig_fpga);
 }
 
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 3965821..14e974b2 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -1249,8 +1249,7 @@
 	return true;
 }
 
-static int data_of_probe(struct platform_device *op,
-			 const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
 {
 	struct device_node *of_node = op->dev.of_node;
 	struct device *this_device;
@@ -1401,7 +1400,7 @@
 	{},
 };
 
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
 	.probe		= data_of_probe,
 	.remove		= data_of_remove,
 	.driver		= {
@@ -1417,12 +1416,12 @@
 
 static int __init data_init(void)
 {
-	return of_register_platform_driver(&data_of_driver);
+	return platform_driver_register(&data_of_driver);
 }
 
 static void __exit data_exit(void)
 {
-	of_unregister_platform_driver(&data_of_driver);
+	platform_driver_unregister(&data_of_driver);
 }
 
 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 26cf12c..701edf6 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -85,7 +85,7 @@
 
 config EEPROM_DIGSY_MTC_CFG
 	bool "DigsyMTC display configuration EEPROMs device"
-	depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+	depends on GPIO_MPC5200 && SPI_GPIO
 	help
 	  This option enables access to display configuration EEPROMs
 	  on digsy_mtc board. You have to additionally select Microwire
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 8cebec5..3f7ad83 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,6 +102,7 @@
 #include <linux/nmi.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
+#include <linux/module.h>
 
 #define v1printk(a...) do { \
 	if (verbose) \
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index dee33ad..10fc478 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,10 +41,10 @@
 #define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset
 					      (Intel EG20T PCH)*/
 #define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
-						offset(OKI SEMICONDUCTOR ML7213)
+						offset(LAPIS Semicon ML7213)
 					      */
 #define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address
-						offset(OKI SEMICONDUCTOR ML7223)
+						offset(LAPIS Semicon ML7223)
 					      */
 
 /* MAX number of INT_REDUCE_CONTROL registers */
@@ -73,6 +73,9 @@
 #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
 #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
 
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -115,6 +118,7 @@
  * @pch_mac_start_address:		MAC address area start address
  * @pch_opt_rom_start_address:		Option ROM start address
  * @ioh_type:				Save IOH type
+ * @pdev:				pointer to pci device struct
  */
 struct pch_phub_reg {
 	u32 phub_id_reg;
@@ -136,6 +140,7 @@
 	u32 pch_mac_start_address;
 	u32 pch_opt_rom_start_address;
 	int ioh_type;
+	struct pci_dev *pdev;
 };
 
 /* SROM SPEC for MAC address assignment offset */
@@ -471,7 +476,7 @@
 	int retval;
 	int i;
 
-	if (chip->ioh_type == 1) /* EG20T */
+	if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
 		retval = pch_phub_gbe_serial_rom_conf(chip);
 	else	/* ML7223 */
 		retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -498,6 +503,7 @@
 	unsigned int orom_size;
 	int ret;
 	int err;
+	ssize_t rom_size;
 
 	struct pch_phub_reg *chip =
 		dev_get_drvdata(container_of(kobj, struct device, kobj));
@@ -509,6 +515,10 @@
 	}
 
 	/* Get Rom signature */
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		goto exrom_map_err;
+
 	pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address,
 				(unsigned char *)&rom_signature);
 	rom_signature &= 0xff;
@@ -539,10 +549,13 @@
 		goto return_err;
 	}
 return_ok:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 	mutex_unlock(&pch_phub_mutex);
 	return addr_offset;
 
 return_err:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+exrom_map_err:
 	mutex_unlock(&pch_phub_mutex);
 return_err_nomutex:
 	return err;
@@ -555,6 +568,7 @@
 	int err;
 	unsigned int addr_offset;
 	int ret;
+	ssize_t rom_size;
 	struct pch_phub_reg *chip =
 		dev_get_drvdata(container_of(kobj, struct device, kobj));
 
@@ -571,6 +585,12 @@
 		goto return_ok;
 	}
 
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address) {
+		err = -ENOMEM;
+		goto exrom_map_err;
+	}
+
 	for (addr_offset = 0; addr_offset < count; addr_offset++) {
 		if (PCH_PHUB_OROM_SIZE < off + addr_offset)
 			goto return_ok;
@@ -585,10 +605,14 @@
 	}
 
 return_ok:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 	mutex_unlock(&pch_phub_mutex);
 	return addr_offset;
 
 return_err:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+
+exrom_map_err:
 	mutex_unlock(&pch_phub_mutex);
 	return err;
 }
@@ -598,8 +622,14 @@
 {
 	u8 mac[8];
 	struct pch_phub_reg *chip = dev_get_drvdata(dev);
+	ssize_t rom_size;
+
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		return -ENOMEM;
 
 	pch_phub_read_gbe_mac_addr(chip, mac);
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 
 	return sprintf(buf, "%pM\n", mac);
 }
@@ -608,6 +638,7 @@
 			     const char *buf, size_t count)
 {
 	u8 mac[6];
+	ssize_t rom_size;
 	struct pch_phub_reg *chip = dev_get_drvdata(dev);
 
 	if (count != 18)
@@ -617,7 +648,12 @@
 		(u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3],
 		(u32 *)&mac[4], (u32 *)&mac[5]);
 
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		return -ENOMEM;
+
 	pch_phub_write_gbe_mac_addr(chip, mac);
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 
 	return count;
 }
@@ -640,7 +676,6 @@
 	int retval;
 
 	int ret;
-	ssize_t rom_size;
 	struct pch_phub_reg *chip;
 
 	chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL);
@@ -677,19 +712,7 @@
 		"in pch_phub_base_address variable is %p\n", __func__,
 		chip->pch_phub_base_address);
 
-	if (id->driver_data != 3) {
-		chip->pch_phub_extrom_base_address =\
-						   pci_map_rom(pdev, &rom_size);
-		if (chip->pch_phub_extrom_base_address == 0) {
-			dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__);
-			ret = -ENOMEM;
-			goto err_pci_map;
-		}
-		dev_dbg(&pdev->dev, "%s : "
-			"pci_map_rom SUCCESS and value in "
-			"pch_phub_extrom_base_address variable is %p\n",
-			__func__, chip->pch_phub_extrom_base_address);
-	}
+	chip->pdev = pdev; /* Save pci device struct */
 
 	if (id->driver_data == 1) { /* EG20T PCH */
 		const char *board_name;
@@ -763,6 +786,22 @@
 		chip->pch_opt_rom_start_address =\
 						 PCH_PHUB_ROM_START_ADDR_ML7223;
 		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+	} else if (id->driver_data == 5) { /* ML7831 */
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
+
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+
+		/* set the prefech value */
+		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
 	}
 
 	chip->ioh_type = id->driver_data;
@@ -773,8 +812,6 @@
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
 
 err_sysfs_create:
-	pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
-err_pci_map:
 	pci_iounmap(pdev, chip->pch_phub_base_address);
 err_pci_iomap:
 	pci_release_regions(pdev);
@@ -792,7 +829,6 @@
 
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
 	sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr);
-	pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
 	pci_iounmap(pdev, chip->pch_phub_base_address);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
@@ -847,6 +883,7 @@
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5,  },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
@@ -873,5 +910,5 @@
 module_init(pch_phub_pci_init);
 module_exit(pch_phub_pci_exit);
 
-MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB");
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 9e9bddaa9..913de07 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <asm/io_apic.h>
 #include "gru.h"
 #include "grulib.h"
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbe..43d073b 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@
 }
 module_exit(spear_pcie_gadget_exit);
 
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
 MODULE_AUTHOR("Pratyush Anand");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 3a35805..43ef8d1 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -35,6 +35,7 @@
 
 #include <linux/skbuff.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/module.h>
 
 
 #define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index a6ef182..ba24790 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -11,6 +11,7 @@
 
 #include <linux/tifm.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "tifm_7xx1"
 #define DRIVER_VERSION "0.8"
diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c
index 44d4475..0bd5349 100644
--- a/drivers/misc/tifm_core.c
+++ b/drivers/misc/tifm_core.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/idr.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "tifm_core"
 #define DRIVER_VERSION "0.8"
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 46b6e84..6be4924 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -11,9 +11,11 @@
  *  MMC card bus driver model
  */
 
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 6045ea4..3923880 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/moduleparam.h>
+#include <linux/export.h>
 #include <linux/debugfs.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index ca2e4f5..e8a5eb3 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/idr.h>
 #include <linux/pagemap.h>
+#include <linux/export.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3627044..dbf421a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -12,6 +12,7 @@
 
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 007863e..4d41fa9 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/scatterlist.h>
 
diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c
index 6c3cf98..06ee1ae 100644
--- a/drivers/mmc/core/quirks.c
+++ b/drivers/mmc/core/quirks.c
@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mmc/card.h>
 
 #ifndef SDIO_VENDOR_ID_TI
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index a230e7f..f2a05ea 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -12,6 +12,7 @@
 
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 46a7854..274ef00 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -11,6 +11,7 @@
 
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/export.h>
 #include <linux/scatterlist.h>
 
 #include <linux/mmc/host.h>
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index c643b2f..40989e6 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -13,6 +13,7 @@
 
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 0f687cd..b1f3168 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -9,6 +9,7 @@
  * your option) any later version.
  */
 
+#include <linux/export.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/sdio.h>
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index b644dd5..68f81b9 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/kthread.h>
+#include <linux/export.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 87d5067..cf444b0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -263,7 +263,7 @@
 
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on SOC_AU1200
+	depends on MIPS_ALCHEMY
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
 	  If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 707bc7d..5d3b9ae 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -64,11 +64,8 @@
 #define AU1XMMC_DESCRIPTOR_COUNT 1
 
 /* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
-#ifdef CONFIG_SOC_AU1100
-#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
-#else	/* Au1200 */
-#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
-#endif
+#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff
+#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff
 
 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
 		     MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
@@ -127,6 +124,7 @@
 #define HOST_F_XMIT	0x0001
 #define HOST_F_RECV	0x0002
 #define HOST_F_DMA	0x0010
+#define HOST_F_DBDMA	0x0020
 #define HOST_F_ACTIVE	0x0100
 #define HOST_F_STOP	0x1000
 
@@ -151,6 +149,16 @@
 #define DMA_CHANNEL(h)	\
 	(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
 
+static inline int has_dbdma(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1200:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
 {
 	u32 val = au_readl(HOST_CONFIG(host));
@@ -353,14 +361,12 @@
 	data->bytes_xfered = 0;
 
 	if (!data->error) {
-		if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+		if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
 			u32 chan = DMA_CHANNEL(host);
 
 			chan_tab_t *c = *((chan_tab_t **)chan);
 			au1x_dma_chan_t *cp = c->chan_ptr;
 			data->bytes_xfered = cp->ddma_bytecnt;
-#endif
 		} else
 			data->bytes_xfered =
 				(data->blocks * data->blksz) - host->pio.len;
@@ -570,11 +576,10 @@
 
 	host->status = HOST_S_DATA;
 
-	if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+	if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) {
 		u32 channel = DMA_CHANNEL(host);
 
-		/* Start the DMA as soon as the buffer gets something in it */
+		/* Start the DBDMA as soon as the buffer gets something in it */
 
 		if (host->flags & HOST_F_RECV) {
 			u32 mask = SD_STATUS_DB | SD_STATUS_NE;
@@ -584,7 +589,6 @@
 		}
 
 		au1xxx_dbdma_start(channel);
-#endif
 	}
 }
 
@@ -633,8 +637,7 @@
 
 	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
-	if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200	/* DBDMA */
+	if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
 		int i;
 		u32 channel = DMA_CHANNEL(host);
 
@@ -663,7 +666,6 @@
 
 			datalen -= len;
 		}
-#endif
 	} else {
 		host->pio.index = 0;
 		host->pio.offset = 0;
@@ -838,7 +840,6 @@
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_SOC_AU1200
 /* 8bit memory DMA device */
 static dbdev_tab_t au1xmmc_mem_dbdev = {
 	.dev_id		= DSCR_CMD0_ALWAYS,
@@ -905,7 +906,7 @@
 	au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
 
 	/* DBDMA is good to go */
-	host->flags |= HOST_F_DMA;
+	host->flags |= HOST_F_DMA | HOST_F_DBDMA;
 
 	return 0;
 }
@@ -918,7 +919,6 @@
 		au1xxx_dbdma_chan_free(host->rx_chan);
 	}
 }
-#endif
 
 static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
 {
@@ -997,8 +997,16 @@
 	mmc->f_min =   450000;
 	mmc->f_max = 24000000;
 
-	mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
-	mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+		mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
+		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	}
 
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 512;
@@ -1028,11 +1036,11 @@
 	tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
 			(unsigned long)host);
 
-#ifdef CONFIG_SOC_AU1200
-	ret = au1xmmc_dbdma_init(host);
-	if (ret)
-		pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
-#endif
+	if (has_dbdma()) {
+		ret = au1xmmc_dbdma_init(host);
+		if (ret)
+			pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+	}
 
 #ifdef CONFIG_LEDS_CLASS
 	if (host->platdata && host->platdata->led) {
@@ -1073,9 +1081,8 @@
 	au_writel(0, HOST_CONFIG2(host));
 	au_sync();
 
-#ifdef CONFIG_SOC_AU1200
-	au1xmmc_dbdma_shutdown(host);
-#endif
+	if (host->flags & HOST_F_DBDMA)
+		au1xmmc_dbdma_shutdown(host);
 
 	tasklet_kill(&host->data_task);
 	tasklet_kill(&host->finish_task);
@@ -1120,9 +1127,9 @@
 		tasklet_kill(&host->data_task);
 		tasklet_kill(&host->finish_task);
 
-#ifdef CONFIG_SOC_AU1200
-		au1xmmc_dbdma_shutdown(host);
-#endif
+		if (host->flags & HOST_F_DBDMA)
+			au1xmmc_dbdma_shutdown(host);
+
 		au1xmmc_set_power(host, 0);
 
 		free_irq(host->irq, host);
@@ -1181,24 +1188,23 @@
 
 static int __init au1xmmc_init(void)
 {
-#ifdef CONFIG_SOC_AU1200
-	/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
-	 * of 8 bits.  And since devices are shared, we need to create
-	 * our own to avoid freaking out other devices.
-	 */
-	memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
-	if (!memid)
-		pr_err("au1xmmc: cannot add memory dbdma dev\n");
-#endif
+	if (has_dbdma()) {
+		/* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+		* of 8 bits.  And since devices are shared, we need to create
+		* our own to avoid freaking out other devices.
+		*/
+		memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+		if (!memid)
+			pr_err("au1xmmc: cannot add memory dbdma\n");
+	}
 	return platform_driver_register(&au1xmmc_driver);
 }
 
 static void __exit au1xmmc_exit(void)
 {
-#ifdef CONFIG_SOC_AU1200
-	if (memid)
+	if (has_dbdma() && memid)
 		au1xxx_ddma_del_device(memid);
-#endif
+
 	platform_driver_unregister(&au1xmmc_driver);
 }
 
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e8ff123..101cd31 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1270,7 +1270,7 @@
 		}
 	} else {
 		if (!host->protect_card) {
-			pr_info"%s: cover is open, "
+			pr_info("%s: cover is open, "
 					 "card is now inaccessible\n",
 					 mmc_hostname(host->mmc));
 			host->protect_card = 1;
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index d2856b6..720f993 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -913,9 +913,9 @@
 }
 
 static void s3cmci_dma_setup(struct s3cmci_host *host,
-			     enum s3c2410_dmasrc source)
+			     enum dma_data_direction source)
 {
-	static enum s3c2410_dmasrc last_source = -1;
+	static enum dma_data_direction last_source = -1;
 	static int setup_ok;
 
 	if (last_source == source)
@@ -1087,7 +1087,7 @@
 
 	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
 
-	s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
+	s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..4b976f0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -32,6 +32,7 @@
 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC		0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
+#define SDHCI_WTMK_LVL			0x44
 #define SDHCI_MIX_CTRL			0x48
 
 /*
@@ -476,6 +477,13 @@
 	if (is_imx53_esdhc(imx_data))
 		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
 
+	/*
+	 * The imx6q ROM code will change the default watermark level setting
+	 * to something insane.  Change it back here.
+	 */
+	if (is_imx6q_usdhc(imx_data))
+		writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
 	boarddata = &imx_data->boarddata;
 	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 067a4cd..89699e8 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 66b616e..318a869 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -12,27 +12,17 @@
 
 if MTD
 
-config MTD_DEBUG
-	bool "Debugging"
-	help
-	  This turns on low-level debugging for the entire MTD sub-system.
-	  Normally, you should say 'N'.
-
-config MTD_DEBUG_VERBOSE
-	int "Debugging verbosity (0 = quiet, 3 = noisy)"
-	depends on MTD_DEBUG
-	default "0"
-	help
-	  Determines the verbosity level of the MTD debugging messages.
-
 config MTD_TESTS
-	tristate "MTD tests support"
+	tristate "MTD tests support (DANGEROUS)"
 	depends on m
 	help
 	  This option includes various MTD tests into compilation. The tests
 	  should normally be compiled as kernel modules. The modules perform
 	  various checks and verifications when loaded.
 
+	  WARNING: some of the tests will ERASE entire MTD device which they
+	  test. Do not use these tests unless you really know what you do.
+
 config MTD_REDBOOT_PARTS
 	tristate "RedBoot partition table parsing"
 	---help---
@@ -137,7 +127,8 @@
 	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
 
 config MTD_OF_PARTS
-	def_bool y
+	tristate "OpenFirmware partitioning information support"
+	default Y
 	depends on OF
 	help
 	  This provides a partition parsing function which derives
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 39664c4..9aaac3a 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -5,8 +5,8 @@
 # Core functionality.
 obj-$(CONFIG_MTD)		+= mtd.o
 mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
-mtd-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 
+obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
 obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 302372c..89a02f6 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -162,8 +162,8 @@
 }
 
 static int parse_afs_partitions(struct mtd_info *mtd,
-                         struct mtd_partition **pparts,
-                         unsigned long origin)
+				struct mtd_partition **pparts,
+				struct mtd_part_parser_data *data)
 {
 	struct mtd_partition *parts;
 	u_int mask, off, idx, sz;
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 6697a1e..f40ea45 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/bootmem.h>
 #include <linux/magic.h>
+#include <linux/module.h>
 
 #define AR7_PARTS	4
 #define ROOT_OFFSET	0xe0000
@@ -46,7 +47,7 @@
 
 static int create_mtd_partitions(struct mtd_info *master,
 				 struct mtd_partition **pparts,
-				 unsigned long origin)
+				 struct mtd_part_parser_data *data)
 {
 	struct ar7_bin_rec header;
 	unsigned int offset;
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 23175ed..8d70895 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -145,8 +145,7 @@
 	if (((major << 8) | minor) < 0x3131) {
 		/* CFI version 1.0 => don't trust bootloc */
 
-		DEBUG(MTD_DEBUG_LEVEL1,
-			"%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+		pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
 			map->name, cfi->mfr, cfi->id);
 
 		/* AFAICS all 29LV400 with a bottom boot block have a device ID
@@ -166,8 +165,7 @@
 			 * the 8-bit device ID.
 			 */
 			(cfi->mfr == CFI_MFR_MACRONIX)) {
-			DEBUG(MTD_DEBUG_LEVEL1,
-				"%s: Macronix MX29LV400C with bottom boot block"
+			pr_debug("%s: Macronix MX29LV400C with bottom boot block"
 				" detected\n", map->name);
 			extp->TopBottom = 2;	/* bottom boot */
 		} else
@@ -178,8 +176,7 @@
 			extp->TopBottom = 2;	/* bottom boot */
 		}
 
-		DEBUG(MTD_DEBUG_LEVEL1,
-			"%s: AMD CFI PRI V%c.%c has no boot block field;"
+		pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;"
 			" deduced %s from Device ID\n", map->name, major, minor,
 			extp->TopBottom == 2 ? "bottom" : "top");
 	}
@@ -191,7 +188,7 @@
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Using buffer write method\n" );
+		pr_debug("Using buffer write method\n" );
 		mtd->write = cfi_amdstd_write_buffers;
 	}
 }
@@ -443,8 +440,8 @@
 	mtd->writesize = 1;
 	mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): write buffer size %d\n",
-		__func__, mtd->writebufsize);
+	pr_debug("MTD %s(): write buffer size %d\n", __func__,
+			mtd->writebufsize);
 
 	mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
 
@@ -1163,7 +1160,7 @@
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
 	       __func__, adr, datum.x[0] );
 
 	/*
@@ -1174,7 +1171,7 @@
 	 */
 	oldd = map_read(map, adr);
 	if (map_word_equal(map, oldd, datum)) {
-		DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): NOP\n",
+		pr_debug("MTD %s(): NOP\n",
 		       __func__);
 		goto op_done;
 	}
@@ -1400,7 +1397,7 @@
 
 	datum = map_word_load(map, buf);
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
+	pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n",
 	       __func__, adr, datum.x[0] );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1587,7 +1584,7 @@
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	pr_debug("MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, chip->start );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, map->size);
@@ -1675,7 +1672,7 @@
 		return ret;
 	}
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): ERASE 0x%.8lx\n",
+	pr_debug("MTD %s(): ERASE 0x%.8lx\n",
 	       __func__, adr );
 
 	XIP_INVAL_CACHED_RANGE(map, adr, len);
@@ -1801,8 +1798,7 @@
 		goto out_unlock;
 	chip->state = FL_LOCKING;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
-	      __func__, adr, len);
+	pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
 
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
 			 cfi->device_type, NULL);
@@ -1837,8 +1833,7 @@
 		goto out_unlock;
 	chip->state = FL_UNLOCKING;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n",
-	      __func__, adr, len);
+	pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len);
 
 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
 			 cfi->device_type, NULL);
diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h
index 5e3cc80..89c6595 100644
--- a/drivers/mtd/chips/fwh_lock.h
+++ b/drivers/mtd/chips/fwh_lock.h
@@ -34,8 +34,7 @@
 
 	/* Refuse the operation if the we cannot look behind the chip */
 	if (chip->start < 0x400000) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-			"MTD %s(): chip->start: %lx wanted >= 0x400000\n",
+		pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
 			__func__, chip->start );
 		return -EIO;
 	}
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index ea832ea..c443f52 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1914,11 +1914,10 @@
 	 * (oh and incidentaly the jedec spec - 3.5.3.3) the reset
 	 * sequence is *supposed* to be 0xaa at 0x5555, 0x55 at
 	 * 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips
-	 * as they will ignore the writes and dont care what address
+	 * as they will ignore the writes and don't care what address
 	 * the F0 is written to */
 	if (cfi->addr_unlock1) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "reset unlock called %x %x \n",
+		pr_debug( "reset unlock called %x %x \n",
 		       cfi->addr_unlock1,cfi->addr_unlock2);
 		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -1941,7 +1940,7 @@
 	uint8_t uaddr;
 
 	if (!(jedec_table[index].devtypes & cfi->device_type)) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
+		pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
 		      jedec_table[index].name, 4 * (1<<cfi->device_type));
 		return 0;
 	}
@@ -2021,7 +2020,7 @@
 		 * there aren't.
 		 */
 		if (finfo->dev_id > 0xff) {
-			DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+			pr_debug("%s(): ID is not 8bit\n",
 			       __func__);
 			goto match_done;
 		}
@@ -2045,12 +2044,10 @@
 	}
 
 	/* the part size must fit in the memory window */
-	DEBUG( MTD_DEBUG_LEVEL3,
-	       "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+	pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
 	       __func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
 	if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+		pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
 		       __func__, finfo->mfr_id, finfo->dev_id,
 		       1 << finfo->dev_size );
 		goto match_done;
@@ -2061,13 +2058,12 @@
 
 	uaddr = finfo->uaddr;
 
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+	pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
 	       __func__, cfi->addr_unlock1, cfi->addr_unlock2 );
 	if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
 	     && ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
 		  unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-			"MTD %s(): 0x%.4x 0x%.4x did not match\n",
+		pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
 			__func__,
 			unlock_addrs[uaddr].addr1,
 			unlock_addrs[uaddr].addr2);
@@ -2083,15 +2079,13 @@
 	 * FIXME - write a driver that takes all of the chip info as
 	 * module parameters, doesn't probe but forces a load.
 	 */
-	DEBUG( MTD_DEBUG_LEVEL3,
-	       "MTD %s(): check ID's disappear when not in ID mode\n",
+	pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
 	       __func__ );
 	jedec_reset( base, map, cfi );
 	mfr = jedec_read_mfr( map, base, cfi );
 	id = jedec_read_id( map, base, cfi );
 	if ( mfr == cfi->mfr && id == cfi->id ) {
-		DEBUG( MTD_DEBUG_LEVEL3,
-		       "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+		pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
 		       "You might need to manually specify JEDEC parameters.\n",
 			__func__, cfi->mfr, cfi->id );
 		goto match_done;
@@ -2104,7 +2098,7 @@
 	 * Put the device back in ID mode - only need to do this if we
 	 * were truly frobbing a real device.
 	 */
-	DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+	pr_debug("MTD %s(): return to ID mode\n", __func__ );
 	if (cfi->addr_unlock1) {
 		cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -2167,13 +2161,11 @@
 
 		cfi->mfr = jedec_read_mfr(map, base, cfi);
 		cfi->id = jedec_read_id(map, base, cfi);
-		DEBUG(MTD_DEBUG_LEVEL3,
-		      "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+		pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
 			cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
 		for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
 			if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
-				DEBUG( MTD_DEBUG_LEVEL3,
-				       "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+				pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
 				       __func__, cfi->mfr, cfi->id,
 				       cfi->addr_unlock1, cfi->addr_unlock2 );
 				if (!cfi_jedec_setup(map, cfi, i))
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index e790f38..ddf9ec6 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -43,6 +43,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/bootmem.h>
+#include <linux/module.h>
 
 /* error message prefix */
 #define ERRP "mtd: "
@@ -188,10 +189,7 @@
 			     extra_mem_size;
 		parts = kzalloc(alloc_size, GFP_KERNEL);
 		if (!parts)
-		{
-			printk(KERN_ERR ERRP "out of memory\n");
 			return NULL;
-		}
 		extra_mem = (unsigned char *)(parts + *num_parts);
 	}
 	/* enter this partition (offset will be calculated later if it is zero at this point) */
@@ -316,8 +314,8 @@
  * the first one in the chain if a NULL mtd_id is passed in.
  */
 static int parse_cmdline_partitions(struct mtd_info *master,
-                             struct mtd_partition **pparts,
-                             unsigned long origin)
+				    struct mtd_partition **pparts,
+				    struct mtd_part_parser_data *data)
 {
 	unsigned long offset;
 	int i;
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35081ce..283d887 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -249,6 +249,16 @@
 	  under "NAND Flash Device Drivers" (currently that driver does not
 	  support all Millennium Plus devices).
 
+config MTD_DOCG3
+	tristate "M-Systems Disk-On-Chip G3"
+	---help---
+	  This provides an MTD device driver for the M-Systems DiskOnChip
+	  G3 devices.
+
+	  The driver provides access to G3 DiskOnChip, distributed by
+	  M-Systems and now Sandisk. The support is very experimental,
+	  and doesn't give access to any write operations.
+
 config MTD_DOCPROBE
 	tristate
 	select MTD_DOCECC
@@ -268,8 +278,7 @@
 config MTD_DOCPROBE_ADDRESS
 	hex "Physical address of DiskOnChip" if MTD_DOCPROBE_ADVANCED
 	depends on MTD_DOCPROBE
-	default "0x0000" if MTD_DOCPROBE_ADVANCED
-	default "0" if !MTD_DOCPROBE_ADVANCED
+	default "0x0"
 	---help---
 	  By default, the probe for DiskOnChip devices will look for a
 	  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index f3226b1..56c7cd4 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
 obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
 obj-$(CONFIG_MTD_DOC2001PLUS)	+= doc2001plus.o
+obj-$(CONFIG_MTD_DOCG3)		+= docg3.o
 obj-$(CONFIG_MTD_DOCPROBE)	+= docprobe.o
 obj-$(CONFIG_MTD_DOCECC)	+= docecc.o
 obj-$(CONFIG_MTD_SLRAM)		+= slram.o
@@ -17,3 +18,5 @@
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
+
+CFLAGS_docg3.o			+= -I$(src)
\ No newline at end of file
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index f7fbf60..e9fad91 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -82,8 +82,7 @@
 	void __iomem *docptr = doc->virtadr;
 	unsigned long timeo = jiffies + (HZ * 10);
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
+	pr_debug("_DoC_WaitReady called for out-of-line wait\n");
 
 	/* Out-of-line routine to wait for chip response */
 	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
@@ -92,7 +91,7 @@
 		DoC_Delay(doc, 2);
 
 		if (time_after(jiffies, timeo)) {
-			DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+			pr_debug("_DoC_WaitReady timed out.\n");
 			return -EIO;
 		}
 		udelay(1);
@@ -323,8 +322,7 @@
 
 	/* Reset the chip */
 	if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
-		DEBUG(MTD_DEBUG_LEVEL2,
-		      "DoC_Command (reset) for %d,%d returned true\n",
+		pr_debug("DoC_Command (reset) for %d,%d returned true\n",
 		      floor, chip);
 		return 0;
 	}
@@ -332,8 +330,7 @@
 
 	/* Read the NAND chip ID: 1. Send ReadID command */
 	if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
-		DEBUG(MTD_DEBUG_LEVEL2,
-		      "DoC_Command (ReadID) for %d,%d returned true\n",
+		pr_debug("DoC_Command (ReadID) for %d,%d returned true\n",
 		      floor, chip);
 		return 0;
 	}
@@ -699,7 +696,7 @@
 #ifdef ECC_DEBUG
 			printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
 #endif
-			/* Read the ECC syndrom through the DiskOnChip ECC
+			/* Read the ECC syndrome through the DiskOnChip ECC
 			   logic.  These syndrome will be all ZERO when there
 			   is no error */
 			for (i = 0; i < 6; i++) {
@@ -930,7 +927,7 @@
 	uint8_t *buf = ops->oobbuf;
 	size_t len = ops->len;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	ofs += ops->ooboffs;
 
@@ -1094,7 +1091,7 @@
 	struct DiskOnChip *this = mtd->priv;
 	int ret;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	mutex_lock(&this->lock);
 	ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 241192f..a3f7a27 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -55,15 +55,14 @@
 {
 	unsigned short c = 0xffff;
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
+	pr_debug("_DoC_WaitReady called for out-of-line wait\n");
 
 	/* Out-of-line routine to wait for chip response */
 	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
 		;
 
 	if (c == 0)
-		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+		pr_debug("_DoC_WaitReady timed out.\n");
 
 	return (c == 0);
 }
@@ -464,7 +463,7 @@
 #ifdef ECC_DEBUG
 		printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 #endif
-		/* Read the ECC syndrom through the DiskOnChip ECC logic.
+		/* Read the ECC syndrome through the DiskOnChip ECC logic.
 		   These syndrome will be all ZERO when there is no error */
 		for (i = 0; i < 6; i++) {
 			syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
@@ -632,7 +631,7 @@
 	uint8_t *buf = ops->oobbuf;
 	size_t len = ops->len;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	ofs += ops->ooboffs;
 
@@ -690,7 +689,7 @@
 	uint8_t *buf = ops->oobbuf;
 	size_t len = ops->len;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	ofs += ops->ooboffs;
 
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 09ae0ad..99351bc 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -61,15 +61,14 @@
 {
 	unsigned int c = 0xffff;
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "_DoC_WaitReady called for out-of-line wait\n");
+	pr_debug("_DoC_WaitReady called for out-of-line wait\n");
 
 	/* Out-of-line routine to wait for chip response */
 	while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c)
 		;
 
 	if (c == 0)
-		DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
+		pr_debug("_DoC_WaitReady timed out.\n");
 
 	return (c == 0);
 }
@@ -655,7 +654,7 @@
 #ifdef ECC_DEBUG
 		printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 #endif
-		/* Read the ECC syndrom through the DiskOnChip ECC logic.
+		/* Read the ECC syndrome through the DiskOnChip ECC logic.
 		   These syndrome will be all ZERO when there is no error */
 		for (i = 0; i < 6; i++)
 			syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i);
@@ -835,7 +834,7 @@
 	uint8_t *buf = ops->oobbuf;
 	size_t len = ops->len;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	ofs += ops->ooboffs;
 
@@ -920,7 +919,7 @@
 	uint8_t *buf = ops->oobbuf;
 	size_t len = ops->len;
 
-	BUG_ON(ops->mode != MTD_OOB_PLACE);
+	BUG_ON(ops->mode != MTD_OPS_PLACE_OOB);
 
 	ofs += ops->ooboffs;
 
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index 37ef29a..4a1c39b 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -2,7 +2,7 @@
  * ECC algorithm for M-systems disk on chip. We use the excellent Reed
  * Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the
  * GNU GPL License. The rest is simply to convert the disk on chip
- * syndrom into a standard syndom.
+ * syndrome into a standard syndome.
  *
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
new file mode 100644
index 0000000..bdcf5df
--- /dev/null
+++ b/drivers/mtd/devices/docg3.c
@@ -0,0 +1,1114 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define CREATE_TRACE_POINTS
+#include "docg3.h"
+
+/*
+ * This driver handles the DiskOnChip G3 flash memory.
+ *
+ * As no specification is available from M-Systems/Sandisk, this drivers lacks
+ * several functions available on the chip, as :
+ *  - block erase
+ *  - page write
+ *  - IPL write
+ *  - ECC fixing (lack of BCH algorith understanding)
+ *  - powerdown / powerup
+ *
+ * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
+ * the driver assumes a 16bits data bus.
+ *
+ * DocG3 relies on 2 ECC algorithms, which are handled in hardware :
+ *  - a 1 byte Hamming code stored in the OOB for each page
+ *  - a 7 bytes BCH code stored in the OOB for each page
+ * The BCH part is only used for check purpose, no correction is available as
+ * some information is missing. What is known is that :
+ *  - BCH is in GF(2^14)
+ *  - BCH is over data of 520 bytes (512 page + 7 page_info bytes
+ *                                   + 1 hamming byte)
+ *  - BCH can correct up to 4 bits (t = 4)
+ *  - BCH syndroms are calculated in hardware, and checked in hardware as well
+ *
+ */
+
+static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
+{
+	u8 val = readb(docg3->base + reg);
+
+	trace_docg3_io(0, 8, reg, (int)val);
+	return val;
+}
+
+static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
+{
+	u16 val = readw(docg3->base + reg);
+
+	trace_docg3_io(0, 16, reg, (int)val);
+	return val;
+}
+
+static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
+{
+	writeb(val, docg3->base + reg);
+	trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
+{
+	writew(val, docg3->base + reg);
+	trace_docg3_io(1, 16, reg, val);
+}
+
+static inline void doc_flash_command(struct docg3 *docg3, u8 cmd)
+{
+	doc_writeb(docg3, cmd, DOC_FLASHCOMMAND);
+}
+
+static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq)
+{
+	doc_writeb(docg3, seq, DOC_FLASHSEQUENCE);
+}
+
+static inline void doc_flash_address(struct docg3 *docg3, u8 addr)
+{
+	doc_writeb(docg3, addr, DOC_FLASHADDRESS);
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int doc_register_readb(struct docg3 *docg3, int reg)
+{
+	u8 val;
+
+	doc_writew(docg3, reg, DOC_READADDRESS);
+	val = doc_readb(docg3, reg);
+	doc_vdbg("Read register %04x : %02x\n", reg, val);
+	return val;
+}
+
+static int doc_register_readw(struct docg3 *docg3, int reg)
+{
+	u16 val;
+
+	doc_writew(docg3, reg, DOC_READADDRESS);
+	val = doc_readw(docg3, reg);
+	doc_vdbg("Read register %04x : %04x\n", reg, val);
+	return val;
+}
+
+/**
+ * doc_delay - delay docg3 operations
+ * @docg3: the device
+ * @nbNOPs: the number of NOPs to issue
+ *
+ * As no specification is available, the right timings between chip commands are
+ * unknown. The only available piece of information are the observed nops on a
+ * working docg3 chip.
+ * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler
+ * friendlier msleep() functions or blocking mdelay().
+ */
+static void doc_delay(struct docg3 *docg3, int nbNOPs)
+{
+	int i;
+
+	doc_dbg("NOP x %d\n", nbNOPs);
+	for (i = 0; i < nbNOPs; i++)
+		doc_writeb(docg3, 0, DOC_NOP);
+}
+
+static int is_prot_seq_error(struct docg3 *docg3)
+{
+	int ctrl;
+
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR);
+}
+
+static int doc_is_ready(struct docg3 *docg3)
+{
+	int ctrl;
+
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return ctrl & DOC_CTRL_FLASHREADY;
+}
+
+static int doc_wait_ready(struct docg3 *docg3)
+{
+	int maxWaitCycles = 100;
+
+	do {
+		doc_delay(docg3, 4);
+		cpu_relax();
+	} while (!doc_is_ready(docg3) && maxWaitCycles--);
+	doc_delay(docg3, 2);
+	if (maxWaitCycles > 0)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int doc_reset_seq(struct docg3 *docg3)
+{
+	int ret;
+
+	doc_writeb(docg3, 0x10, DOC_FLASHCONTROL);
+	doc_flash_sequence(docg3, DOC_SEQ_RESET);
+	doc_flash_command(docg3, DOC_CMD_RESET);
+	doc_delay(docg3, 2);
+	ret = doc_wait_ready(docg3);
+
+	doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true");
+	return ret;
+}
+
+/**
+ * doc_read_data_area - Read data from data area
+ * @docg3: the device
+ * @buf: the buffer to fill in
+ * @len: the lenght to read
+ * @first: first time read, DOC_READADDRESS should be set
+ *
+ * Reads bytes from flash data. Handles the single byte / even bytes reads.
+ */
+static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
+			       int first)
+{
+	int i, cdr, len4;
+	u16 data16, *dst16;
+	u8 data8, *dst8;
+
+	doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len);
+	cdr = len & 0x3;
+	len4 = len - cdr;
+
+	if (first)
+		doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+	dst16 = buf;
+	for (i = 0; i < len4; i += 2) {
+		data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
+		*dst16 = data16;
+		dst16++;
+	}
+
+	if (cdr) {
+		doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+			   DOC_READADDRESS);
+		doc_delay(docg3, 1);
+		dst8 = (u8 *)dst16;
+		for (i = 0; i < cdr; i++) {
+			data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
+			*dst8 = data8;
+			dst8++;
+		}
+	}
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to reliable data mode
+ * @docg3: the device
+ *
+ * The reliable data mode is a bit slower than the fast mode, but less errors
+ * occur.  Entering the reliable mode cannot be done without entering the fast
+ * mode first.
+ */
+static void doc_set_reliable_mode(struct docg3 *docg3)
+{
+	doc_dbg("doc_set_reliable_mode()\n");
+	doc_flash_sequence(docg3, DOC_SEQ_SET_MODE);
+	doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+	doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+	doc_delay(docg3, 2);
+}
+
+/**
+ * doc_set_asic_mode - Set the ASIC mode
+ * @docg3: the device
+ * @mode: the mode
+ *
+ * The ASIC can work in 3 modes :
+ *  - RESET: all registers are zeroed
+ *  - NORMAL: receives and handles commands
+ *  - POWERDOWN: minimal poweruse, flash parts shut off
+ */
+static void doc_set_asic_mode(struct docg3 *docg3, u8 mode)
+{
+	int i;
+
+	for (i = 0; i < 12; i++)
+		doc_readb(docg3, DOC_IOSPACE_IPL);
+
+	mode |= DOC_ASICMODE_MDWREN;
+	doc_dbg("doc_set_asic_mode(%02x)\n", mode);
+	doc_writeb(docg3, mode, DOC_ASICMODE);
+	doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM);
+	doc_delay(docg3, 1);
+}
+
+/**
+ * doc_set_device_id - Sets the devices id for cascaded G3 chips
+ * @docg3: the device
+ * @id: the chip to select (amongst 0, 1, 2, 3)
+ *
+ * There can be 4 cascaded G3 chips. This function selects the one which will
+ * should be the active one.
+ */
+static void doc_set_device_id(struct docg3 *docg3, int id)
+{
+	u8 ctrl;
+
+	doc_dbg("doc_set_device_id(%d)\n", id);
+	doc_writeb(docg3, id, DOC_DEVICESELECT);
+	ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+	ctrl &= ~DOC_CTRL_VIOLATION;
+	ctrl |= DOC_CTRL_CE;
+	doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+}
+
+/**
+ * doc_set_extra_page_mode - Change flash page layout
+ * @docg3: the device
+ *
+ * Normally, the flash page is split into the data (512 bytes) and the out of
+ * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear
+ * leveling counters are stored.  To access this last area of 4 bytes, a special
+ * mode must be input to the flash ASIC.
+ *
+ * Returns 0 if no error occured, -EIO else.
+ */
+static int doc_set_extra_page_mode(struct docg3 *docg3)
+{
+	int fctrl;
+
+	doc_dbg("doc_set_extra_page_mode()\n");
+	doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532);
+	doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532);
+	doc_delay(docg3, 2);
+
+	fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR))
+		return -EIO;
+	else
+		return 0;
+}
+
+/**
+ * doc_seek - Set both flash planes to the specified block, page for reading
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @wear: if true, read will occur on the 4 extra bytes of the wear area
+ * @ofs: offset in page to read
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
+			 int wear, int ofs)
+{
+	int sector, ret = 0;
+
+	doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n",
+		block0, block1, page, ofs, wear);
+
+	if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+		doc_delay(docg3, 2);
+	} else {
+		doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+		doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+		doc_delay(docg3, 2);
+	}
+
+	doc_set_reliable_mode(docg3);
+	if (wear)
+		ret = doc_set_extra_page_mode(docg3);
+	if (ret)
+		goto out;
+
+	sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_flash_sequence(docg3, DOC_SEQ_READ);
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_delay(docg3, 1);
+	doc_flash_address(docg3, sector & 0xff);
+	doc_flash_address(docg3, (sector >> 8) & 0xff);
+	doc_flash_address(docg3, (sector >> 16) & 0xff);
+	doc_delay(docg3, 1);
+
+	sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+	doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+	doc_delay(docg3, 1);
+	doc_flash_address(docg3, sector & 0xff);
+	doc_flash_address(docg3, (sector >> 8) & 0xff);
+	doc_flash_address(docg3, (sector >> 16) & 0xff);
+	doc_delay(docg3, 2);
+
+out:
+	return ret;
+}
+
+/**
+ * doc_read_page_ecc_init - Initialize hardware ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
+{
+	doc_writew(docg3, DOC_ECCCONF0_READ_MODE
+		   | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+		   | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+		   DOC_ECCCONF0);
+	doc_delay(docg3, 4);
+	doc_register_readb(docg3, DOC_FLASHCONTROL);
+	return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_read_page_prepare - Prepares reading data from a flash page
+ * @docg3: the device
+ * @block0: the first plane block index on flash memory
+ * @block1: the second plane block index on flash memory
+ * @page: the page index in the block
+ * @offset: the offset in the page (must be a multiple of 4)
+ *
+ * Prepares the page to be read in the flash memory :
+ *   - tell ASIC to map the flash pages
+ *   - tell ASIC to be in read mode
+ *
+ * After a call to this method, a call to doc_read_page_finish is mandatory,
+ * to end the read cycle of the flash.
+ *
+ * Read data from a flash page. The length to be read must be between 0 and
+ * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because
+ * the extra bytes reading is not implemented).
+ *
+ * As pages are grouped by 2 (in 2 planes), reading from a page must be done
+ * in two steps:
+ *  - one read of 512 bytes at offset 0
+ *  - one read of 512 bytes at offset 512 + 16
+ *
+ * Returns 0 if successful, -EIO if a read error occured.
+ */
+static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
+				 int page, int offset)
+{
+	int wear_area = 0, ret = 0;
+
+	doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n",
+		block0, block1, page, offset);
+	if (offset >= DOC_LAYOUT_WEAR_OFFSET)
+		wear_area = 1;
+	if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2))
+		return -EINVAL;
+
+	doc_set_device_id(docg3, docg3->device_id);
+	ret = doc_reset_seq(docg3);
+	if (ret)
+		goto err;
+
+	/* Program the flash address block and page */
+	ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset);
+	if (ret)
+		goto err;
+
+	doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES);
+	doc_delay(docg3, 2);
+	doc_wait_ready(docg3);
+
+	doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ);
+	doc_delay(docg3, 1);
+	if (offset >= DOC_LAYOUT_PAGE_SIZE * 2)
+		offset -= 2 * DOC_LAYOUT_PAGE_SIZE;
+	doc_flash_address(docg3, offset >> 2);
+	doc_delay(docg3, 1);
+	doc_wait_ready(docg3);
+
+	doc_flash_command(docg3, DOC_CMD_READ_FLASH);
+
+	return 0;
+err:
+	doc_writeb(docg3, 0, DOC_DATAEND);
+	doc_delay(docg3, 2);
+	return -EIO;
+}
+
+/**
+ * doc_read_page_getbytes - Reads bytes from a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be read (must be a multiple of 4)
+ * @buf: the buffer to be filled in
+ * @first: 1 if first time read, DOC_READADDRESS should be set
+ *
+ */
+static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
+				  int first)
+{
+	doc_read_data_area(docg3, buf, len, first);
+	doc_delay(docg3, 2);
+	return len;
+}
+
+/**
+ * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms
+ * @docg3: the device
+ * @syns:  the array of 7 integers where the syndroms will be stored
+ */
+static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
+{
+	int i;
+
+	for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+		syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i));
+}
+
+/**
+ * doc_read_page_finish - Ends reading of a flash page
+ * @docg3: the device
+ *
+ * As a side effect, resets the chip selector to 0. This ensures that after each
+ * read operation, the floor 0 is selected. Therefore, if the systems halts, the
+ * reboot will boot on floor 0, where the IPL is.
+ */
+static void doc_read_page_finish(struct docg3 *docg3)
+{
+	doc_writeb(docg3, 0, DOC_DATAEND);
+	doc_delay(docg3, 2);
+	doc_set_device_id(docg3, 0);
+}
+
+/**
+ * calc_block_sector - Calculate blocks, pages and ofs.
+
+ * @from: offset in flash
+ * @block0: first plane block index calculated
+ * @block1: second plane block index calculated
+ * @page: page calculated
+ * @ofs: offset in page
+ */
+static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
+			      int *ofs)
+{
+	uint sector;
+
+	sector = from / DOC_LAYOUT_PAGE_SIZE;
+	*block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES)
+		* DOC_LAYOUT_NBPLANES;
+	*block1 = *block0 + 1;
+	*page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES);
+	*page /= DOC_LAYOUT_NBPLANES;
+	if (sector % 2)
+		*ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
+	else
+		*ofs = 0;
+}
+
+/**
+ * doc_read - Read bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ *        size
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+	     size_t *retlen, u_char *buf)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int block0, block1, page, readlen, ret, ofs = 0;
+	int syn[DOC_ECC_BCH_SIZE], eccconf1;
+	u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+	ret = -EINVAL;
+	doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf);
+	if (from % DOC_LAYOUT_PAGE_SIZE)
+		goto err;
+	if (len % 4)
+		goto err;
+	calc_block_sector(from, &block0, &block1, &page, &ofs);
+	if (block1 > docg3->max_block)
+		goto err;
+
+	*retlen = 0;
+	ret = 0;
+	readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+	while (!ret && len > 0) {
+		readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+		ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
+		if (ret < 0)
+			goto err;
+		ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES);
+		if (ret < 0)
+			goto err_in_read;
+		ret = doc_read_page_getbytes(docg3, readlen, buf, 1);
+		if (ret < readlen)
+			goto err_in_read;
+		ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+					     oob, 0);
+		if (ret < DOC_LAYOUT_OOB_SIZE)
+			goto err_in_read;
+
+		*retlen += readlen;
+		buf += readlen;
+		len -= readlen;
+
+		ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE;
+		if (ofs == 0)
+			page += 2;
+		if (page > DOC_ADDR_PAGE_MASK) {
+			page = 0;
+			block0 += 2;
+			block1 += 2;
+		}
+
+		/*
+		 * There should be a BCH bitstream fixing algorithm here ...
+		 * By now, a page read failure is triggered by BCH error
+		 */
+		doc_get_hw_bch_syndroms(docg3, syn);
+		eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+
+		doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+			 oob[0], oob[1], oob[2], oob[3], oob[4],
+			 oob[5], oob[6]);
+		doc_dbg("OOB - HAMMING: %02x\n", oob[7]);
+		doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+			 oob[8], oob[9], oob[10], oob[11], oob[12],
+			 oob[13], oob[14]);
+		doc_dbg("OOB - UNUSED: %02x\n", oob[15]);
+		doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
+		doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+			syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]);
+
+		ret = -EBADMSG;
+		if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) {
+			if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR)
+				goto err_in_read;
+			if (is_prot_seq_error(docg3))
+				goto err_in_read;
+		}
+		doc_read_page_finish(docg3);
+	}
+
+	return 0;
+err_in_read:
+	doc_read_page_finish(docg3);
+err:
+	return ret;
+}
+
+/**
+ * doc_read_oob - Read out of band bytes from flash
+ * @mtd: the device
+ * @from: the offset from first block and first page, in bytes, aligned on page
+ *        size
+ * @ops: the mtd oob structure
+ *
+ * Reads flash memory OOB area of pages.
+ *
+ * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ */
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+			struct mtd_oob_ops *ops)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int block0, block1, page, ofs, ret;
+	u8 *buf = ops->oobbuf;
+	size_t len = ops->ooblen;
+
+	doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len);
+	if (len != DOC_LAYOUT_OOB_SIZE)
+		return -EINVAL;
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+		buf += ops->ooboffs;
+		break;
+	default:
+		break;
+	}
+
+	calc_block_sector(from, &block0, &block1, &page, &ofs);
+	if (block1 > docg3->max_block)
+		return -EINVAL;
+
+	ret = doc_read_page_prepare(docg3, block0, block1, page,
+				    ofs + DOC_LAYOUT_PAGE_SIZE);
+	if (!ret)
+		ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE);
+	if (!ret)
+		ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
+					     buf, 1);
+	doc_read_page_finish(docg3);
+
+	if (ret > 0)
+		ops->oobretlen = ret;
+	else
+		ops->oobretlen = 0;
+	return (ret > 0) ? 0 : ret;
+}
+
+static int doc_reload_bbt(struct docg3 *docg3)
+{
+	int block = DOC_LAYOUT_BLOCK_BBT;
+	int ret = 0, nbpages, page;
+	u_char *buf = docg3->bbt;
+
+	nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE);
+	for (page = 0; !ret && (page < nbpages); page++) {
+		ret = doc_read_page_prepare(docg3, block, block + 1,
+					    page + DOC_LAYOUT_PAGE_BBT, 0);
+		if (!ret)
+			ret = doc_read_page_ecc_init(docg3,
+						     DOC_LAYOUT_PAGE_SIZE);
+		if (!ret)
+			doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE,
+					       buf, 1);
+		buf += DOC_LAYOUT_PAGE_SIZE;
+	}
+	doc_read_page_finish(docg3);
+	return ret;
+}
+
+/**
+ * doc_block_isbad - Checks whether a block is good or not
+ * @mtd: the device
+ * @from: the offset to find the correct block
+ *
+ * Returns 1 if block is bad, 0 if block is good
+ */
+static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int block0, block1, page, ofs, is_good;
+
+	calc_block_sector(from, &block0, &block1, &page, &ofs);
+	doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
+		from, block0, block1, page, ofs);
+
+	if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA)
+		return 0;
+	if (block1 > docg3->max_block)
+		return -EINVAL;
+
+	is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7));
+	return !is_good;
+}
+
+/**
+ * doc_get_erase_count - Get block erase count
+ * @docg3: the device
+ * @from: the offset in which the block is.
+ *
+ * Get the number of times a block was erased. The number is the maximum of
+ * erase times between first and second plane (which should be equal normally).
+ *
+ * Returns The number of erases, or -EINVAL or -EIO on error.
+ */
+static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
+{
+	u8 buf[DOC_LAYOUT_WEAR_SIZE];
+	int ret, plane1_erase_count, plane2_erase_count;
+	int block0, block1, page, ofs;
+
+	doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
+	if (from % DOC_LAYOUT_PAGE_SIZE)
+		return -EINVAL;
+	calc_block_sector(from, &block0, &block1, &page, &ofs);
+	if (block1 > docg3->max_block)
+		return -EINVAL;
+
+	ret = doc_reset_seq(docg3);
+	if (!ret)
+		ret = doc_read_page_prepare(docg3, block0, block1, page,
+					    ofs + DOC_LAYOUT_WEAR_OFFSET);
+	if (!ret)
+		ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE,
+					     buf, 1);
+	doc_read_page_finish(docg3);
+
+	if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK))
+		return -EIO;
+	plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8)
+		| ((u8)(~buf[5]) << 16);
+	plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8)
+		| ((u8)(~buf[7]) << 16);
+
+	return max(plane1_erase_count, plane2_erase_count);
+}
+
+/*
+ * Debug sysfs entries
+ */
+static int dbg_flashctrl_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+
+	int pos = 0;
+	u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+
+	pos += seq_printf(s,
+		 "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+		 fctrl,
+		 fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+		 fctrl & DOC_CTRL_CE ? "active" : "inactive",
+		 fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+		 fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+		 fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+	return pos;
+}
+DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
+
+static int dbg_asicmode_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+
+	int pos = 0;
+	int pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+	int mode = pctrl & 0x03;
+
+	pos += seq_printf(s,
+			 "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+			 pctrl,
+			 pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+			 pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+			 pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+			 pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+			 pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+			 mode >> 1, mode & 0x1);
+
+	switch (mode) {
+	case DOC_ASICMODE_RESET:
+		pos += seq_printf(s, "reset");
+		break;
+	case DOC_ASICMODE_NORMAL:
+		pos += seq_printf(s, "normal");
+		break;
+	case DOC_ASICMODE_POWERDOWN:
+		pos += seq_printf(s, "powerdown");
+		break;
+	}
+	pos += seq_printf(s, ")\n");
+	return pos;
+}
+DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
+
+static int dbg_device_id_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+	int pos = 0;
+	int id = doc_register_readb(docg3, DOC_DEVICESELECT);
+
+	pos += seq_printf(s, "DeviceId = %d\n", id);
+	return pos;
+}
+DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
+
+static int dbg_protection_show(struct seq_file *s, void *p)
+{
+	struct docg3 *docg3 = (struct docg3 *)s->private;
+	int pos = 0;
+	int protect = doc_register_readb(docg3, DOC_PROTECTION);
+	int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+	int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
+	int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
+	int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+	int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
+	int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+
+	pos += seq_printf(s, "Protection = 0x%02x (",
+			 protect);
+	if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
+		pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+	if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
+		pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+	if (protect & DOC_PROTECT_LOCK_INPUT)
+		pos += seq_printf(s, "LOCK_INPUT,");
+	if (protect & DOC_PROTECT_STICKY_LOCK)
+		pos += seq_printf(s, "STICKY_LOCK,");
+	if (protect & DOC_PROTECT_PROTECTION_ENABLED)
+		pos += seq_printf(s, "PROTECTION ON,");
+	if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
+		pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+	if (protect & DOC_PROTECT_PROTECTION_ERROR)
+		pos += seq_printf(s, "PROTECT_ERR,");
+	else
+		pos += seq_printf(s, "NO_PROTECT_ERR");
+	pos += seq_printf(s, ")\n");
+
+	pos += seq_printf(s, "DPS0 = 0x%02x : "
+			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+			 dps0, dps0_low, dps0_high,
+			 !!(dps0 & DOC_DPS_OTP_PROTECTED),
+			 !!(dps0 & DOC_DPS_READ_PROTECTED),
+			 !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+			 !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+			 !!(dps0 & DOC_DPS_KEY_OK));
+	pos += seq_printf(s, "DPS1 = 0x%02x : "
+			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
+			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+			 dps1, dps1_low, dps1_high,
+			 !!(dps1 & DOC_DPS_OTP_PROTECTED),
+			 !!(dps1 & DOC_DPS_READ_PROTECTED),
+			 !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+			 !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+			 !!(dps1 & DOC_DPS_KEY_OK));
+	return pos;
+}
+DEBUGFS_RO_ATTR(protection, dbg_protection_show);
+
+static int __init doc_dbg_register(struct docg3 *docg3)
+{
+	struct dentry *root, *entry;
+
+	root = debugfs_create_dir("docg3", NULL);
+	if (!root)
+		return -ENOMEM;
+
+	entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3,
+				  &flashcontrol_fops);
+	if (entry)
+		entry = debugfs_create_file("asic_mode", S_IRUSR, root,
+					    docg3, &asic_mode_fops);
+	if (entry)
+		entry = debugfs_create_file("device_id", S_IRUSR, root,
+					    docg3, &device_id_fops);
+	if (entry)
+		entry = debugfs_create_file("protection", S_IRUSR, root,
+					    docg3, &protection_fops);
+	if (entry) {
+		docg3->debugfs_root = root;
+		return 0;
+	} else {
+		debugfs_remove_recursive(root);
+		return -ENOMEM;
+	}
+}
+
+static void __exit doc_dbg_unregister(struct docg3 *docg3)
+{
+	debugfs_remove_recursive(docg3->debugfs_root);
+}
+
+/**
+ * doc_set_driver_info - Fill the mtd_info structure and docg3 structure
+ * @chip_id: The chip ID of the supported chip
+ * @mtd: The structure to fill
+ */
+static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+{
+	struct docg3 *docg3 = mtd->priv;
+	int cfg;
+
+	cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
+	docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+
+	switch (chip_id) {
+	case DOC_CHIPID_G3:
+		mtd->name = "DiskOnChip G3";
+		docg3->max_block = 2047;
+		break;
+	}
+	mtd->type = MTD_NANDFLASH;
+	/*
+	 * Once write methods are added, the correct flags will be set.
+	 * mtd->flags = MTD_CAP_NANDFLASH;
+	 */
+	mtd->flags = MTD_CAP_ROM;
+	mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+	mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+	mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
+	mtd->owner = THIS_MODULE;
+	mtd->erase = NULL;
+	mtd->point = NULL;
+	mtd->unpoint = NULL;
+	mtd->read = doc_read;
+	mtd->write = NULL;
+	mtd->read_oob = doc_read_oob;
+	mtd->write_oob = NULL;
+	mtd->sync = NULL;
+	mtd->block_isbad = doc_block_isbad;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct docg3 *docg3;
+	struct mtd_info *mtd;
+	struct resource *ress;
+	int ret, bbt_nbpages;
+	u16 chip_id, chip_id_inv;
+
+	ret = -ENOMEM;
+	docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
+	if (!docg3)
+		goto nomem1;
+	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+	if (!mtd)
+		goto nomem2;
+	mtd->priv = docg3;
+
+	ret = -ENXIO;
+	ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ress) {
+		dev_err(dev, "No I/O memory resource defined\n");
+		goto noress;
+	}
+	docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+
+	docg3->dev = &pdev->dev;
+	docg3->device_id = 0;
+	doc_set_device_id(docg3, docg3->device_id);
+	doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+	doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
+
+	chip_id = doc_register_readw(docg3, DOC_CHIPID);
+	chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
+
+	ret = -ENODEV;
+	if (chip_id != (u16)(~chip_id_inv)) {
+		doc_info("No device found at IO addr %p\n",
+			 (void *)ress->start);
+		goto nochipfound;
+	}
+
+	switch (chip_id) {
+	case DOC_CHIPID_G3:
+		doc_info("Found a G3 DiskOnChip at addr %p\n",
+			 (void *)ress->start);
+		break;
+	default:
+		doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
+		goto nochipfound;
+	}
+
+	doc_set_driver_info(chip_id, mtd);
+	platform_set_drvdata(pdev, mtd);
+
+	ret = -ENOMEM;
+	bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+				   8 * DOC_LAYOUT_PAGE_SIZE);
+	docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+	if (!docg3->bbt)
+		goto nochipfound;
+	doc_reload_bbt(docg3);
+
+	ret = mtd_device_parse_register(mtd, part_probes,
+					NULL, NULL, 0);
+	if (ret)
+		goto register_error;
+
+	doc_dbg_register(docg3);
+	return 0;
+
+register_error:
+	kfree(docg3->bbt);
+nochipfound:
+	iounmap(docg3->base);
+noress:
+	kfree(mtd);
+nomem2:
+	kfree(docg3);
+nomem1:
+	return ret;
+}
+
+/**
+ * docg3_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int __exit docg3_release(struct platform_device *pdev)
+{
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct docg3 *docg3 = mtd->priv;
+
+	doc_dbg_unregister(docg3);
+	mtd_device_unregister(mtd);
+	iounmap(docg3->base);
+	kfree(docg3->bbt);
+	kfree(docg3);
+	kfree(mtd);
+	return 0;
+}
+
+static struct platform_driver g3_driver = {
+	.driver		= {
+		.name	= "docg3",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(docg3_release),
+};
+
+static int __init docg3_init(void)
+{
+	return platform_driver_probe(&g3_driver, docg3_probe);
+}
+module_init(docg3_init);
+
+
+static void __exit docg3_exit(void)
+{
+	platform_driver_unregister(&g3_driver);
+}
+module_exit(docg3_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_DESCRIPTION("MTD driver for DiskOnChip G3");
diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
new file mode 100644
index 0000000..0d407be
--- /dev/null
+++ b/drivers/mtd/devices/docg3.h
@@ -0,0 +1,297 @@
+/*
+ * Handles the M-Systems DiskOnChip G3 chip
+ *
+ * Copyright (C) 2011 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _MTD_DOCG3_H
+#define _MTD_DOCG3_H
+
+/*
+ * Flash memory areas :
+ *   - 0x0000 .. 0x07ff : IPL
+ *   - 0x0800 .. 0x0fff : Data area
+ *   - 0x1000 .. 0x17ff : Registers
+ *   - 0x1800 .. 0x1fff : Unknown
+ */
+#define DOC_IOSPACE_IPL			0x0000
+#define DOC_IOSPACE_DATA		0x0800
+#define DOC_IOSPACE_SIZE		0x2000
+
+/*
+ * DOC G3 layout and adressing scheme
+ *   A page address for the block "b", plane "P" and page "p":
+ *   address = [bbbb bPpp pppp]
+ */
+
+#define DOC_ADDR_PAGE_MASK		0x3f
+#define DOC_ADDR_BLOCK_SHIFT		6
+#define DOC_LAYOUT_NBPLANES		2
+#define DOC_LAYOUT_PAGES_PER_BLOCK	64
+#define DOC_LAYOUT_PAGE_SIZE		512
+#define DOC_LAYOUT_OOB_SIZE		16
+#define DOC_LAYOUT_WEAR_SIZE		8
+#define DOC_LAYOUT_PAGE_OOB_SIZE				\
+	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
+#define DOC_LAYOUT_WEAR_OFFSET		(DOC_LAYOUT_PAGE_OOB_SIZE * 2)
+#define DOC_LAYOUT_BLOCK_SIZE					\
+	(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+#define DOC_ECC_BCH_SIZE		7
+#define DOC_ECC_BCH_COVERED_BYTES				\
+	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +	\
+	 DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+
+/*
+ * Blocks distribution
+ */
+#define DOC_LAYOUT_BLOCK_BBT		0
+#define DOC_LAYOUT_BLOCK_OTP		0
+#define DOC_LAYOUT_BLOCK_FIRST_DATA	6
+
+#define DOC_LAYOUT_PAGE_BBT		4
+
+/*
+ * Extra page OOB (16 bytes wide) layout
+ */
+#define DOC_LAYOUT_OOB_PAGEINFO_OFS	0
+#define DOC_LAYOUT_OOB_HAMMING_OFS	7
+#define DOC_LAYOUT_OOB_BCH_OFS		8
+#define DOC_LAYOUT_OOB_UNUSED_OFS	15
+#define DOC_LAYOUT_OOB_PAGEINFO_SZ	7
+#define DOC_LAYOUT_OOB_HAMMING_SZ	1
+#define DOC_LAYOUT_OOB_BCH_SZ		7
+#define DOC_LAYOUT_OOB_UNUSED_SZ	1
+
+
+#define DOC_CHIPID_G3			0x200
+#define DOC_ERASE_MARK			0xaa
+/*
+ * Flash registers
+ */
+#define DOC_CHIPID			0x1000
+#define DOC_TEST			0x1004
+#define DOC_BUSLOCK			0x1006
+#define DOC_ENDIANCONTROL		0x1008
+#define DOC_DEVICESELECT		0x100a
+#define DOC_ASICMODE			0x100c
+#define DOC_CONFIGURATION		0x100e
+#define DOC_INTERRUPTCONTROL		0x1010
+#define DOC_READADDRESS			0x101a
+#define DOC_DATAEND			0x101e
+#define DOC_INTERRUPTSTATUS		0x1020
+
+#define DOC_FLASHSEQUENCE		0x1032
+#define DOC_FLASHCOMMAND		0x1034
+#define DOC_FLASHADDRESS		0x1036
+#define DOC_FLASHCONTROL		0x1038
+#define DOC_NOP				0x103e
+
+#define DOC_ECCCONF0			0x1040
+#define DOC_ECCCONF1			0x1042
+#define DOC_ECCPRESET			0x1044
+#define DOC_HAMMINGPARITY		0x1046
+#define DOC_BCH_SYNDROM(idx)		(0x1048 + (idx << 1))
+
+#define DOC_PROTECTION			0x1056
+#define DOC_DPS0_ADDRLOW		0x1060
+#define DOC_DPS0_ADDRHIGH		0x1062
+#define DOC_DPS1_ADDRLOW		0x1064
+#define DOC_DPS1_ADDRHIGH		0x1066
+#define DOC_DPS0_STATUS			0x106c
+#define DOC_DPS1_STATUS			0x106e
+
+#define DOC_ASICMODECONFIRM		0x1072
+#define DOC_CHIPID_INV			0x1074
+
+/*
+ * Flash sequences
+ * A sequence is preset before one or more commands are input to the chip.
+ */
+#define DOC_SEQ_RESET			0x00
+#define DOC_SEQ_PAGE_SIZE_532		0x03
+#define DOC_SEQ_SET_MODE		0x09
+#define DOC_SEQ_READ			0x12
+#define DOC_SEQ_SET_PLANE1		0x0e
+#define DOC_SEQ_SET_PLANE2		0x10
+#define DOC_SEQ_PAGE_SETUP		0x1d
+
+/*
+ * Flash commands
+ */
+#define DOC_CMD_READ_PLANE1		0x00
+#define DOC_CMD_SET_ADDR_READ		0x05
+#define DOC_CMD_READ_ALL_PLANES		0x30
+#define DOC_CMD_READ_PLANE2		0x50
+#define DOC_CMD_READ_FLASH		0xe0
+#define DOC_CMD_PAGE_SIZE_532		0x3c
+
+#define DOC_CMD_PROG_BLOCK_ADDR		0x60
+#define DOC_CMD_PROG_CYCLE1		0x80
+#define DOC_CMD_PROG_CYCLE2		0x10
+#define DOC_CMD_ERASECYCLE2		0xd0
+
+#define DOC_CMD_RELIABLE_MODE		0x22
+#define DOC_CMD_FAST_MODE		0xa2
+
+#define DOC_CMD_RESET			0xff
+
+/*
+ * Flash register : DOC_FLASHCONTROL
+ */
+#define DOC_CTRL_VIOLATION		0x20
+#define DOC_CTRL_CE			0x10
+#define DOC_CTRL_UNKNOWN_BITS		0x08
+#define DOC_CTRL_PROTECTION_ERROR	0x04
+#define DOC_CTRL_SEQUENCE_ERROR		0x02
+#define DOC_CTRL_FLASHREADY		0x01
+
+/*
+ * Flash register : DOC_ASICMODE
+ */
+#define DOC_ASICMODE_RESET		0x00
+#define DOC_ASICMODE_NORMAL		0x01
+#define DOC_ASICMODE_POWERDOWN		0x02
+#define DOC_ASICMODE_MDWREN		0x04
+#define DOC_ASICMODE_BDETCT_RESET	0x08
+#define DOC_ASICMODE_RSTIN_RESET	0x10
+#define DOC_ASICMODE_RAM_WE		0x20
+
+/*
+ * Flash register : DOC_ECCCONF0
+ */
+#define DOC_ECCCONF0_READ_MODE		0x8000
+#define DOC_ECCCONF0_AUTO_ECC_ENABLE	0x4000
+#define DOC_ECCCONF0_HAMMING_ENABLE	0x1000
+#define DOC_ECCCONF0_BCH_ENABLE		0x0800
+#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
+
+/*
+ * Flash register : DOC_ECCCONF1
+ */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
+#define DOC_ECCCONF1_UNKOWN1		0x40
+#define DOC_ECCCONF1_UNKOWN2		0x20
+#define DOC_ECCCONF1_UNKOWN3		0x10
+#define DOC_ECCCONF1_HAMMING_BITS_MASK	0x0f
+
+/*
+ * Flash register : DOC_PROTECTION
+ */
+#define DOC_PROTECT_FOUNDRY_OTP_LOCK	0x01
+#define DOC_PROTECT_CUSTOMER_OTP_LOCK	0x02
+#define DOC_PROTECT_LOCK_INPUT		0x04
+#define DOC_PROTECT_STICKY_LOCK		0x08
+#define DOC_PROTECT_PROTECTION_ENABLED	0x10
+#define DOC_PROTECT_IPL_DOWNLOAD_LOCK	0x20
+#define DOC_PROTECT_PROTECTION_ERROR	0x80
+
+/*
+ * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
+ */
+#define DOC_DPS_OTP_PROTECTED		0x01
+#define DOC_DPS_READ_PROTECTED		0x02
+#define DOC_DPS_WRITE_PROTECTED		0x04
+#define DOC_DPS_HW_LOCK_ENABLED		0x08
+#define DOC_DPS_KEY_OK			0x80
+
+/*
+ * Flash register : DOC_CONFIGURATION
+ */
+#define DOC_CONF_IF_CFG			0x80
+#define DOC_CONF_MAX_ID_MASK		0x30
+#define DOC_CONF_VCCQ_3V		0x01
+
+/*
+ * Flash register : DOC_READADDRESS
+ */
+#define DOC_READADDR_INC		0x8000
+#define DOC_READADDR_ONE_BYTE		0x4000
+#define DOC_READADDR_ADDR_MASK		0x1fff
+
+/**
+ * struct docg3 - DiskOnChip driver private data
+ * @dev: the device currently under control
+ * @base: mapped IO space
+ * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
+ * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+ * @bbt: bad block table cache
+ * @debugfs_root: debugfs root node
+ */
+struct docg3 {
+	struct device *dev;
+	void __iomem *base;
+	unsigned int device_id:4;
+	unsigned int if_cfg:1;
+	int max_block;
+	u8 *bbt;
+	struct dentry *debugfs_root;
+};
+
+#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
+#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
+#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
+#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
+
+#define DEBUGFS_RO_ATTR(name, show_fct) \
+	static int name##_open(struct inode *inode, struct file *file) \
+	{ return single_open(file, show_fct, inode->i_private); }      \
+	static const struct file_operations name##_fops = { \
+		.owner = THIS_MODULE, \
+		.open = name##_open, \
+		.llseek = seq_lseek, \
+		.read = seq_read, \
+		.release = single_release \
+	};
+#endif
+
+/*
+ * Trace events part
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM docg3
+
+#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define _MTD_DOCG3_TRACE
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(docg3_io,
+	    TP_PROTO(int op, int width, u16 reg, int val),
+	    TP_ARGS(op, width, reg, val),
+	    TP_STRUCT__entry(
+		    __field(int, op)
+		    __field(unsigned char, width)
+		    __field(u16, reg)
+		    __field(int, val)),
+	    TP_fast_assign(
+		    __entry->op = op;
+		    __entry->width = width;
+		    __entry->reg = reg;
+		    __entry->val = val;),
+	    TP_printk("docg3: %s%02d reg=%04x, val=%04x",
+		      __entry->op ? "write" : "read", __entry->width,
+		      __entry->reg, __entry->val)
+	);
+#endif
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE docg3
+#include <trace/define_trace.h>
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d374603..45116bb 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -50,11 +50,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/doc2000.h>
 
-/* Where to look for the devices? */
-#ifndef CONFIG_MTD_DOCPROBE_ADDRESS
-#define CONFIG_MTD_DOCPROBE_ADDRESS 0
-#endif
-
 
 static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS;
 module_param(doc_config_location, ulong, 0);
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 772a0ff..3a11ea6 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -34,9 +34,6 @@
 /* debugging */
 //#define LART_DEBUG
 
-/* partition support */
-#define HAVE_PARTITIONS
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -44,9 +41,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mtd/mtd.h>
-#ifdef HAVE_PARTITIONS
 #include <linux/mtd/partitions.h>
-#endif
 
 #ifndef CONFIG_SA1100_LART
 #error This is for LART architecture only
@@ -598,7 +593,6 @@
 	}
 };
 
-#ifdef HAVE_PARTITIONS
 static struct mtd_partition lart_partitions[] = {
 	/* blob */
 	{
@@ -619,7 +613,7 @@
 		.size	= INITRD_LEN,		/* MTDPART_SIZ_FULL */
 	}
 };
-#endif
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
 
 static int __init lart_flash_init (void)
 {
@@ -668,7 +662,6 @@
 			   result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
 			   result,mtd.eraseregions[result].numblocks);
 
-#ifdef HAVE_PARTITIONS
    printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
 
    for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
@@ -681,25 +674,16 @@
 			 result,lart_partitions[result].offset,
 			 result,lart_partitions[result].size,lart_partitions[result].size / 1024);
 #endif
-#endif
 
-#ifndef HAVE_PARTITIONS
-   result = mtd_device_register(&mtd, NULL, 0);
-#else
    result = mtd_device_register(&mtd, lart_partitions,
                                 ARRAY_SIZE(lart_partitions));
-#endif
 
    return (result);
 }
 
 static void __exit lart_flash_exit (void)
 {
-#ifndef HAVE_PARTITIONS
    mtd_device_unregister(&mtd);
-#else
-   mtd_device_unregister(&mtd);
-#endif
 }
 
 module_init (lart_flash_init);
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35180e4..884904d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/cfi.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of_platform.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -88,7 +89,6 @@
 	struct spi_device	*spi;
 	struct mutex		lock;
 	struct mtd_info		mtd;
-	unsigned		partitioned:1;
 	u16			page_size;
 	u16			addr_width;
 	u8			erase_opcode;
@@ -209,9 +209,8 @@
  */
 static int erase_chip(struct m25p *flash)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %lldKiB\n",
-	      dev_name(&flash->spi->dev), __func__,
-	      (long long)(flash->mtd.size >> 10));
+	pr_debug("%s: %s %lldKiB\n", dev_name(&flash->spi->dev), __func__,
+			(long long)(flash->mtd.size >> 10));
 
 	/* Wait until finished previous write command. */
 	if (wait_till_ready(flash))
@@ -250,9 +249,8 @@
  */
 static int erase_sector(struct m25p *flash, u32 offset)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n",
-			dev_name(&flash->spi->dev), __func__,
-			flash->mtd.erasesize / 1024, offset);
+	pr_debug("%s: %s %dKiB at 0x%08x\n", dev_name(&flash->spi->dev),
+			__func__, flash->mtd.erasesize / 1024, offset);
 
 	/* Wait until finished previous write command. */
 	if (wait_till_ready(flash))
@@ -286,9 +284,9 @@
 	u32 addr,len;
 	uint32_t rem;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%llx, len %lld\n",
-	      dev_name(&flash->spi->dev), __func__, "at",
-	      (long long)instr->addr, (long long)instr->len);
+	pr_debug("%s: %s at 0x%llx, len %lld\n", dev_name(&flash->spi->dev),
+			__func__, (long long)instr->addr,
+			(long long)instr->len);
 
 	/* sanity checks */
 	if (instr->addr + instr->len > flash->mtd.size)
@@ -348,9 +346,8 @@
 	struct spi_transfer t[2];
 	struct spi_message m;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
-			dev_name(&flash->spi->dev), __func__, "from",
-			(u32)from, len);
+	pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+			__func__, (u32)from, len);
 
 	/* sanity checks */
 	if (!len)
@@ -417,9 +414,8 @@
 	struct spi_transfer t[2];
 	struct spi_message m;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
-			dev_name(&flash->spi->dev), __func__, "to",
-			(u32)to, len);
+	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+			__func__, (u32)to, len);
 
 	*retlen = 0;
 
@@ -510,9 +506,8 @@
 	size_t actual;
 	int cmd_sz, ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n",
-			dev_name(&flash->spi->dev), __func__, "to",
-			(u32)to, len);
+	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+			__func__, (u32)to, len);
 
 	*retlen = 0;
 
@@ -661,6 +656,7 @@
 	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
 
 	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
 	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
 
 	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
@@ -671,6 +667,7 @@
 	/* EON -- en25xxx */
 	{ "en25f32", INFO(0x1c3116, 0, 64 * 1024,  64, SECT_4K) },
 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
+	{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024,  64, 0) },
 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
 
 	/* Intel/Numonyx -- xxxs33b */
@@ -788,8 +785,8 @@
 	 */
 	tmp = spi_write_then_read(spi, &code, 1, id, 5);
 	if (tmp < 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
-			dev_name(&spi->dev), tmp);
+		pr_debug("%s: error %d reading JEDEC ID\n",
+				dev_name(&spi->dev), tmp);
 		return ERR_PTR(tmp);
 	}
 	jedec = id[0];
@@ -825,8 +822,12 @@
 	struct m25p			*flash;
 	struct flash_info		*info;
 	unsigned			i;
-	struct mtd_partition		*parts = NULL;
-	int				nr_parts = 0;
+	struct mtd_part_parser_data	ppdata;
+
+#ifdef CONFIG_MTD_OF_PARTS
+	if (!of_device_is_available(spi->dev.of_node))
+		return -ENODEV;
+#endif
 
 	/* Platform data helps sort out which chip type we have, as
 	 * well as how this board partitions it.  If we don't have
@@ -928,6 +929,7 @@
 	if (info->flags & M25P_NO_ERASE)
 		flash->mtd.flags |= MTD_NO_ERASE;
 
+	ppdata.of_node = spi->dev.of_node;
 	flash->mtd.dev.parent = &spi->dev;
 	flash->page_size = info->page_size;
 
@@ -945,8 +947,7 @@
 	dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
 			(long long)flash->mtd.size >> 10);
 
-	DEBUG(MTD_DEBUG_LEVEL2,
-		"mtd .name = %s, .size = 0x%llx (%lldMiB) "
+	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
 			".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 		flash->mtd.name,
 		(long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
@@ -955,8 +956,7 @@
 
 	if (flash->mtd.numeraseregions)
 		for (i = 0; i < flash->mtd.numeraseregions; i++)
-			DEBUG(MTD_DEBUG_LEVEL2,
-				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
+			pr_debug("mtd.eraseregions[%d] = { .offset = 0x%llx, "
 				".erasesize = 0x%.8x (%uKiB), "
 				".numblocks = %d }\n",
 				i, (long long)flash->mtd.eraseregions[i].offset,
@@ -968,41 +968,9 @@
 	/* partitions should match sector boundaries; and it may be good to
 	 * use readonly partitions for writeprotected sectors (BP2..BP0).
 	 */
-	if (mtd_has_cmdlinepart()) {
-		static const char *part_probes[]
-			= { "cmdlinepart", NULL, };
-
-		nr_parts = parse_mtd_partitions(&flash->mtd,
-						part_probes, &parts, 0);
-	}
-
-	if (nr_parts <= 0 && data && data->parts) {
-		parts = data->parts;
-		nr_parts = data->nr_parts;
-	}
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (nr_parts <= 0 && spi->dev.of_node) {
-		nr_parts = of_mtd_parse_partitions(&spi->dev,
-						   spi->dev.of_node, &parts);
-	}
-#endif
-
-	if (nr_parts > 0) {
-		for (i = 0; i < nr_parts; i++) {
-			DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
-			      "{.name = %s, .offset = 0x%llx, "
-			      ".size = 0x%llx (%lldKiB) }\n",
-			      i, parts[i].name,
-			      (long long)parts[i].offset,
-			      (long long)parts[i].size,
-			      (long long)(parts[i].size >> 10));
-		}
-		flash->partitioned = 1;
-	}
-
-	return mtd_device_register(&flash->mtd, parts, nr_parts) == 1 ?
-		-ENODEV : 0;
+	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+			data ? data->parts : NULL,
+			data ? data->nr_parts : 0);
 }
 
 
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 13749d4..d75c7af 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -17,6 +17,8 @@
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -24,7 +26,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-
 /*
  * DataFlash is a kind of SPI flash.  Most AT45 chips have two buffers in
  * each chip, which may be used for double buffered I/O; but this driver
@@ -98,6 +99,16 @@
 	struct mtd_info		mtd;
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id dataflash_dt_ids[] = {
+	{ .compatible = "atmel,at45", },
+	{ .compatible = "atmel,dataflash", },
+	{ /* sentinel */ }
+};
+#else
+#define dataflash_dt_ids NULL
+#endif
+
 /* ......................................................................... */
 
 /*
@@ -122,7 +133,7 @@
 	for (;;) {
 		status = dataflash_status(spi);
 		if (status < 0) {
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: status %d?\n",
+			pr_debug("%s: status %d?\n",
 					dev_name(&spi->dev), status);
 			status = 0;
 		}
@@ -149,7 +160,7 @@
 	uint8_t			*command;
 	uint32_t		rem;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%llx len 0x%llx\n",
+	pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
 	      dev_name(&spi->dev), (long long)instr->addr,
 	      (long long)instr->len);
 
@@ -187,7 +198,7 @@
 		command[2] = (uint8_t)(pageaddr >> 8);
 		command[3] = 0;
 
-		DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
+		pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
 			do_block ? "block" : "page",
 			command[0], command[1], command[2], command[3],
 			pageaddr);
@@ -238,8 +249,8 @@
 	uint8_t			*command;
 	int			status;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
-		dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len));
+	pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
+			(unsigned)from, (unsigned)(from + len));
 
 	*retlen = 0;
 
@@ -255,7 +266,7 @@
 
 	command = priv->command;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
+	pr_debug("READ: (%x) %x %x %x\n",
 		command[0], command[1], command[2], command[3]);
 
 	spi_message_init(&msg);
@@ -287,7 +298,7 @@
 		*retlen = msg.actual_length - 8;
 		status = 0;
 	} else
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: read %x..%x --> %d\n",
+		pr_debug("%s: read %x..%x --> %d\n",
 			dev_name(&priv->spi->dev),
 			(unsigned)from, (unsigned)(from + len),
 			status);
@@ -314,7 +325,7 @@
 	int			status = -EINVAL;
 	uint8_t			*command;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
+	pr_debug("%s: write 0x%x..0x%x\n",
 		dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
 
 	*retlen = 0;
@@ -340,7 +351,7 @@
 
 	mutex_lock(&priv->lock);
 	while (remaining > 0) {
-		DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
+		pr_debug("write @ %i:%i len=%i\n",
 			pageaddr, offset, writelen);
 
 		/* REVISIT:
@@ -368,12 +379,12 @@
 			command[2] = (addr & 0x0000FF00) >> 8;
 			command[3] = 0;
 
-			DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
+			pr_debug("TRANSFER: (%x) %x %x %x\n",
 				command[0], command[1], command[2], command[3]);
 
 			status = spi_sync(spi, &msg);
 			if (status < 0)
-				DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
+				pr_debug("%s: xfer %u -> %d\n",
 					dev_name(&spi->dev), addr, status);
 
 			(void) dataflash_waitready(priv->spi);
@@ -386,7 +397,7 @@
 		command[2] = (addr & 0x0000FF00) >> 8;
 		command[3] = (addr & 0x000000FF);
 
-		DEBUG(MTD_DEBUG_LEVEL3, "PROGRAM: (%x) %x %x %x\n",
+		pr_debug("PROGRAM: (%x) %x %x %x\n",
 			command[0], command[1], command[2], command[3]);
 
 		x[1].tx_buf = writebuf;
@@ -395,7 +406,7 @@
 		status = spi_sync(spi, &msg);
 		spi_transfer_del(x + 1);
 		if (status < 0)
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
+			pr_debug("%s: pgm %u/%u -> %d\n",
 				dev_name(&spi->dev), addr, writelen, status);
 
 		(void) dataflash_waitready(priv->spi);
@@ -410,12 +421,12 @@
 		command[2] = (addr & 0x0000FF00) >> 8;
 		command[3] = 0;
 
-		DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
+		pr_debug("COMPARE: (%x) %x %x %x\n",
 			command[0], command[1], command[2], command[3]);
 
 		status = spi_sync(spi, &msg);
 		if (status < 0)
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
+			pr_debug("%s: compare %u -> %d\n",
 				dev_name(&spi->dev), addr, status);
 
 		status = dataflash_waitready(priv->spi);
@@ -634,11 +645,10 @@
 {
 	struct dataflash		*priv;
 	struct mtd_info			*device;
+	struct mtd_part_parser_data	ppdata;
 	struct flash_platform_data	*pdata = spi->dev.platform_data;
 	char				*otp_tag = "";
 	int				err = 0;
-	struct mtd_partition		*parts;
-	int				nr_parts = 0;
 
 	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv)
@@ -677,28 +687,11 @@
 			pagesize, otp_tag);
 	dev_set_drvdata(&spi->dev, priv);
 
-	if (mtd_has_cmdlinepart()) {
-		static const char *part_probes[] = { "cmdlinepart", NULL, };
+	ppdata.of_node = spi->dev.of_node;
+	err = mtd_device_parse_register(device, NULL, &ppdata,
+			pdata ? pdata->parts : NULL,
+			pdata ? pdata->nr_parts : 0);
 
-		nr_parts = parse_mtd_partitions(device, part_probes, &parts,
-						0);
-	}
-
-	if (nr_parts <= 0 && pdata && pdata->parts) {
-		parts = pdata->parts;
-		nr_parts = pdata->nr_parts;
-	}
-
-	if (nr_parts > 0) {
-		priv->partitioned = 1;
-		err = mtd_device_register(device, parts, nr_parts);
-		goto out;
-	}
-
-	if (mtd_device_register(device, NULL, 0) == 1)
-		err = -ENODEV;
-
-out:
 	if (!err)
 		return 0;
 
@@ -787,7 +780,7 @@
 	 */
 	tmp = spi_write_then_read(spi, &code, 1, id, 3);
 	if (tmp < 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+		pr_debug("%s: error %d reading JEDEC ID\n",
 			dev_name(&spi->dev), tmp);
 		return ERR_PTR(tmp);
 	}
@@ -804,7 +797,7 @@
 			tmp < ARRAY_SIZE(dataflash_data);
 			tmp++, info++) {
 		if (info->jedec_id == jedec) {
-			DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+			pr_debug("%s: OTP, sector protect%s\n",
 				dev_name(&spi->dev),
 				(info->flags & SUP_POW2PS)
 					? ", binary pagesize" : ""
@@ -812,8 +805,7 @@
 			if (info->flags & SUP_POW2PS) {
 				status = dataflash_status(spi);
 				if (status < 0) {
-					DEBUG(MTD_DEBUG_LEVEL1,
-						"%s: status error %d\n",
+					pr_debug("%s: status error %d\n",
 						dev_name(&spi->dev), status);
 					return ERR_PTR(status);
 				}
@@ -878,7 +870,7 @@
 	 */
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
+		pr_debug("%s: status error %d\n",
 				dev_name(&spi->dev), status);
 		if (status == 0 || status == 0xff)
 			status = -ENODEV;
@@ -914,14 +906,14 @@
 		break;
 	/* obsolete AT45DB1282 not (yet?) supported */
 	default:
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: unsupported device (%x)\n",
-				dev_name(&spi->dev), status & 0x3c);
+		pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev),
+				status & 0x3c);
 		status = -ENODEV;
 	}
 
 	if (status < 0)
-		DEBUG(MTD_DEBUG_LEVEL1, "%s: add_dataflash --> %d\n",
-				dev_name(&spi->dev), status);
+		pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
+				status);
 
 	return status;
 }
@@ -931,7 +923,7 @@
 	struct dataflash	*flash = dev_get_drvdata(&spi->dev);
 	int			status;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev));
+	pr_debug("%s: remove\n", dev_name(&spi->dev));
 
 	status = mtd_device_unregister(&flash->mtd);
 	if (status == 0) {
@@ -946,6 +938,7 @@
 		.name		= "mtd_dataflash",
 		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
+		.of_match_table = dataflash_dt_ids,
 	},
 
 	.probe		= dataflash_probe,
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index 83e80c6..d38ef3b 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -52,8 +52,6 @@
 	struct spi_device	*spi;
 	struct mutex		lock;
 	struct mtd_info		mtd;
-
-	int 			partitioned;
 };
 
 struct flash_info {
@@ -381,8 +379,6 @@
 	struct sst25l_flash *flash;
 	struct flash_platform_data *data;
 	int ret, i;
-	struct mtd_partition *parts = NULL;
-	int nr_parts = 0;
 
 	flash_info = sst25l_match_device(spi);
 	if (!flash_info)
@@ -414,8 +410,7 @@
 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
 		 (long long)flash->mtd.size >> 10);
 
-	DEBUG(MTD_DEBUG_LEVEL2,
-	      "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
 	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 	      flash->mtd.name,
 	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
@@ -423,37 +418,10 @@
 	      flash->mtd.numeraseregions);
 
 
-	if (mtd_has_cmdlinepart()) {
-		static const char *part_probes[] = {"cmdlinepart", NULL};
-
-		nr_parts = parse_mtd_partitions(&flash->mtd,
-						part_probes,
-						&parts, 0);
-	}
-
-	if (nr_parts <= 0 && data && data->parts) {
-		parts = data->parts;
-		nr_parts = data->nr_parts;
-	}
-
-	if (nr_parts > 0) {
-		for (i = 0; i < nr_parts; i++) {
-			DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
-			      "{.name = %s, .offset = 0x%llx, "
-			      ".size = 0x%llx (%lldKiB) }\n",
-			      i, parts[i].name,
-			      (long long)parts[i].offset,
-			      (long long)parts[i].size,
-			      (long long)(parts[i].size >> 10));
-		}
-
-		flash->partitioned = 1;
-		return mtd_device_register(&flash->mtd, parts,
-					   nr_parts);
-	}
-
-	ret = mtd_device_register(&flash->mtd, NULL, 0);
-	if (ret == 1) {
+	ret = mtd_device_parse_register(&flash->mtd, NULL, 0,
+			data ? data->parts : NULL,
+			data ? data->nr_parts : 0);
+	if (ret) {
 		kfree(flash);
 		dev_set_drvdata(&spi->dev, NULL);
 		return -ENODEV;
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 037b399..c7382bb 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -339,7 +339,7 @@
     struct erase_info *erase;
 
     xfer = &part->XferInfo[xfernum];
-    DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
+    pr_debug("ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
     xfer->state = XFER_ERASING;
 
     /* Is there a free erase slot? Always in MTD. */
@@ -415,7 +415,7 @@
     xfer = &part->XferInfo[i];
     xfer->state = XFER_FAILED;
 
-    DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
+    pr_debug("ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
 
     /* Write the transfer unit header */
     header = part->header;
@@ -476,7 +476,7 @@
 
     eun = &part->EUNInfo[srcunit];
     xfer = &part->XferInfo[xferunit];
-    DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
+    pr_debug("ftl_cs: copying block 0x%x to 0x%x\n",
 	  eun->Offset, xfer->Offset);
 
 
@@ -598,7 +598,7 @@
     unit with the fewest erases, and usually pick the data unit with
     the most deleted blocks.  But with a small probability, pick the
     oldest data unit instead.  This means that we generally postpone
-    the next reclaimation as long as possible, but shuffle static
+    the next reclamation as long as possible, but shuffle static
     stuff around a bit for wear leveling.
 
 ======================================================================*/
@@ -609,8 +609,8 @@
     uint32_t best;
     int queued, ret;
 
-    DEBUG(0, "ftl_cs: reclaiming space...\n");
-    DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
+    pr_debug("ftl_cs: reclaiming space...\n");
+    pr_debug("NumTransferUnits == %x\n", part->header.NumTransferUnits);
     /* Pick the least erased transfer unit */
     best = 0xffffffff; xfer = 0xffff;
     do {
@@ -618,22 +618,22 @@
 	for (i = 0; i < part->header.NumTransferUnits; i++) {
 	    int n=0;
 	    if (part->XferInfo[i].state == XFER_UNKNOWN) {
-		DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
+		pr_debug("XferInfo[%d].state == XFER_UNKNOWN\n",i);
 		n=1;
 		erase_xfer(part, i);
 	    }
 	    if (part->XferInfo[i].state == XFER_ERASING) {
-		DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
+		pr_debug("XferInfo[%d].state == XFER_ERASING\n",i);
 		n=1;
 		queued = 1;
 	    }
 	    else if (part->XferInfo[i].state == XFER_ERASED) {
-		DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
+		pr_debug("XferInfo[%d].state == XFER_ERASED\n",i);
 		n=1;
 		prepare_xfer(part, i);
 	    }
 	    if (part->XferInfo[i].state == XFER_PREPARED) {
-		DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
+		pr_debug("XferInfo[%d].state == XFER_PREPARED\n",i);
 		n=1;
 		if (part->XferInfo[i].EraseCount <= best) {
 		    best = part->XferInfo[i].EraseCount;
@@ -641,12 +641,12 @@
 		}
 	    }
 		if (!n)
-		    DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
+		    pr_debug("XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
 
 	}
 	if (xfer == 0xffff) {
 	    if (queued) {
-		DEBUG(1, "ftl_cs: waiting for transfer "
+		pr_debug("ftl_cs: waiting for transfer "
 		      "unit to be prepared...\n");
 		if (part->mbd.mtd->sync)
 			part->mbd.mtd->sync(part->mbd.mtd);
@@ -656,7 +656,7 @@
 		    printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
 			   "suitable transfer units!\n");
 		else
-		    DEBUG(1, "ftl_cs: reclaim failed: no "
+		    pr_debug("ftl_cs: reclaim failed: no "
 			  "suitable transfer units!\n");
 
 		return -EIO;
@@ -666,7 +666,7 @@
 
     eun = 0;
     if ((jiffies % shuffle_freq) == 0) {
-	DEBUG(1, "ftl_cs: recycling freshest block...\n");
+	pr_debug("ftl_cs: recycling freshest block...\n");
 	best = 0xffffffff;
 	for (i = 0; i < part->DataUnits; i++)
 	    if (part->EUNInfo[i].EraseCount <= best) {
@@ -686,7 +686,7 @@
 		printk(KERN_NOTICE "ftl_cs: reclaim failed: "
 		       "no free blocks!\n");
 	    else
-		DEBUG(1,"ftl_cs: reclaim failed: "
+		pr_debug("ftl_cs: reclaim failed: "
 		       "no free blocks!\n");
 
 	    return -EIO;
@@ -771,7 +771,7 @@
 	printk(KERN_NOTICE "ftl_cs: bad free list!\n");
 	return 0;
     }
-    DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
+    pr_debug("ftl_cs: found free block at %d in %d\n", blk, eun);
     return blk;
 
 } /* find_free */
@@ -791,7 +791,7 @@
     int ret;
     size_t offset, retlen;
 
-    DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
+    pr_debug("ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
 	  part, sector, nblocks);
     if (!(part->state & FTL_FORMATTED)) {
 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -840,7 +840,7 @@
     int ret;
     size_t retlen, offset;
 
-    DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
+    pr_debug("ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
 	  part, log_addr, virt_addr);
     bsize = 1 << part->header.EraseUnitSize;
     eun = log_addr / bsize;
@@ -905,7 +905,7 @@
     int ret;
     size_t retlen, offset;
 
-    DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
+    pr_debug("ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
 	  part, sector, nblocks);
     if (!(part->state & FTL_FORMATTED)) {
 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
@@ -1011,7 +1011,7 @@
 	partition_t *part = (void *)dev;
 	uint32_t bsize = 1 << part->header.EraseUnitSize;
 
-	DEBUG(1, "FTL erase sector %ld for %d sectors\n",
+	pr_debug("FTL erase sector %ld for %d sectors\n",
 	      sector, nr_sects);
 
 	while (nr_sects) {
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index d7592e6..dd034ef 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -63,14 +63,12 @@
 		return;
 	}
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: add_mtd for %s\n", mtd->name);
+	pr_debug("INFTL: add_mtd for %s\n", mtd->name);
 
 	inftl = kzalloc(sizeof(*inftl), GFP_KERNEL);
 
-	if (!inftl) {
-		printk(KERN_WARNING "INFTL: Out of memory for data structures\n");
+	if (!inftl)
 		return;
-	}
 
 	inftl->mbd.mtd = mtd;
 	inftl->mbd.devnum = -1;
@@ -133,7 +131,7 @@
 {
 	struct INFTLrecord *inftl = (void *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("INFTL: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 
@@ -154,7 +152,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & (mtd->writesize - 1);
 	ops.ooblen = len;
 	ops.oobbuf = buf;
@@ -174,7 +172,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & (mtd->writesize - 1);
 	ops.ooblen = len;
 	ops.oobbuf = buf;
@@ -194,7 +192,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = oob;
@@ -215,16 +213,16 @@
 	u16 pot = inftl->LastFreeEUN;
 	int silly = inftl->nb_blocks;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findfreeblock(inftl=%p,"
-		"desperate=%d)\n", inftl, desperate);
+	pr_debug("INFTL: INFTL_findfreeblock(inftl=%p,desperate=%d)\n",
+			inftl, desperate);
 
 	/*
 	 * Normally, we force a fold to happen before we run out of free
 	 * blocks completely.
 	 */
 	if (!desperate && inftl->numfreeEUNs < 2) {
-		DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
-			"EUNs (%d)\n", inftl->numfreeEUNs);
+		pr_debug("INFTL: there are too few free EUNs (%d)\n",
+				inftl->numfreeEUNs);
 		return BLOCK_NIL;
 	}
 
@@ -259,8 +257,8 @@
 	struct inftl_oob oob;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,"
-		"pending=%d)\n", inftl, thisVUC, pendingblock);
+	pr_debug("INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d,pending=%d)\n",
+			inftl, thisVUC, pendingblock);
 
 	memset(BlockMap, 0xff, sizeof(BlockMap));
 	memset(BlockDeleted, 0, sizeof(BlockDeleted));
@@ -323,8 +321,7 @@
 	 * Chain, and the Erase Unit into which we are supposed to be copying.
 	 * Go for it.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: folding chain %d into unit %d\n",
-		thisVUC, targetEUN);
+	pr_debug("INFTL: folding chain %d into unit %d\n", thisVUC, targetEUN);
 
 	for (block = 0; block < inftl->EraseSize/SECTORSIZE ; block++) {
 		unsigned char movebuf[SECTORSIZE];
@@ -349,14 +346,13 @@
 		ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) +
 				(block * SECTORSIZE), SECTORSIZE, &retlen,
 				movebuf);
-		if (ret < 0 && ret != -EUCLEAN) {
+		if (ret < 0 && !mtd_is_bitflip(ret)) {
 			ret = mtd->read(mtd,
 					(inftl->EraseSize * BlockMap[block]) +
 					(block * SECTORSIZE), SECTORSIZE,
 					&retlen, movebuf);
 			if (ret != -EIO)
-				DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went "
-				      "away on retry?\n");
+				pr_debug("INFTL: error went away on retry?\n");
 		}
 		memset(&oob, 0xff, sizeof(struct inftl_oob));
 		oob.b.Status = oob.b.Status1 = SECTOR_USED;
@@ -372,8 +368,7 @@
 	 * is important, by doing oldest first if we crash/reboot then it
 	 * it is relatively simple to clean up the mess).
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: want to erase virtual chain %d\n",
-		thisVUC);
+	pr_debug("INFTL: want to erase virtual chain %d\n", thisVUC);
 
 	for (;;) {
 		/* Find oldest unit in chain. */
@@ -421,7 +416,7 @@
 	u16 ChainLength = 0, thislen;
 	u16 chain, EUN;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_makefreeblock(inftl=%p,"
+	pr_debug("INFTL: INFTL_makefreeblock(inftl=%p,"
 		"pending=%d)\n", inftl, pendingblock);
 
 	for (chain = 0; chain < inftl->nb_blocks; chain++) {
@@ -484,8 +479,8 @@
 	size_t retlen;
 	int silly, silly2 = 3;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_findwriteunit(inftl=%p,"
-		"block=%d)\n", inftl, block);
+	pr_debug("INFTL: INFTL_findwriteunit(inftl=%p,block=%d)\n",
+			inftl, block);
 
 	do {
 		/*
@@ -501,8 +496,8 @@
 				       blockofs, 8, &retlen, (char *)&bci);
 
 			status = bci.Status | bci.Status1;
-			DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in "
-				"EUN %d is %x\n", block , writeEUN, status);
+			pr_debug("INFTL: status of block %d in EUN %d is %x\n",
+					block , writeEUN, status);
 
 			switch(status) {
 			case SECTOR_FREE:
@@ -555,9 +550,9 @@
 			 * Hopefully we free something, lets try again.
 			 * This time we are desperate...
 			 */
-			DEBUG(MTD_DEBUG_LEVEL1, "INFTL: using desperate==1 "
-				"to find free EUN to accommodate write to "
-				"VUC %d\n", thisVUC);
+			pr_debug("INFTL: using desperate==1 to find free EUN "
+					"to accommodate write to VUC %d\n",
+					thisVUC);
 			writeEUN = INFTL_findfreeblock(inftl, 1);
 			if (writeEUN == BLOCK_NIL) {
 				/*
@@ -647,7 +642,7 @@
 	struct inftl_bci bci;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_trydeletechain(inftl=%p,"
+	pr_debug("INFTL: INFTL_trydeletechain(inftl=%p,"
 		"thisVUC=%d)\n", inftl, thisVUC);
 
 	memset(BlockUsed, 0, sizeof(BlockUsed));
@@ -711,7 +706,7 @@
 	 * For each block in the chain free it and make it available
 	 * for future use. Erase from the oldest unit first.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL1, "INFTL: deleting empty VUC %d\n", thisVUC);
+	pr_debug("INFTL: deleting empty VUC %d\n", thisVUC);
 
 	for (;;) {
 		u16 *prevEUN = &inftl->VUtable[thisVUC];
@@ -719,7 +714,7 @@
 
 		/* If the chain is all gone already, we're done */
 		if (thisEUN == BLOCK_NIL) {
-			DEBUG(MTD_DEBUG_LEVEL2, "INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
+			pr_debug("INFTL: Empty VUC %d for deletion was already absent\n", thisEUN);
 			return;
 		}
 
@@ -731,7 +726,7 @@
 			thisEUN = *prevEUN;
 		}
 
-		DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n",
+		pr_debug("Deleting EUN %d from VUC %d\n",
 		      thisEUN, thisVUC);
 
 		if (INFTL_formatblock(inftl, thisEUN) < 0) {
@@ -767,7 +762,7 @@
 	size_t retlen;
 	struct inftl_bci bci;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_deleteblock(inftl=%p,"
+	pr_debug("INFTL: INFTL_deleteblock(inftl=%p,"
 		"block=%d)\n", inftl, block);
 
 	while (thisEUN < inftl->nb_blocks) {
@@ -826,7 +821,7 @@
 	struct inftl_oob oob;
 	char *p, *pend;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_writeblock(inftl=%p,block=%ld,"
+	pr_debug("INFTL: inftl_writeblock(inftl=%p,block=%ld,"
 		"buffer=%p)\n", inftl, block, buffer);
 
 	/* Is block all zero? */
@@ -876,7 +871,7 @@
 	struct inftl_bci bci;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld,"
+	pr_debug("INFTL: inftl_readblock(inftl=%p,block=%ld,"
 		"buffer=%p)\n", inftl, block, buffer);
 
 	while (thisEUN < inftl->nb_blocks) {
@@ -922,7 +917,7 @@
 		int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer);
 
 		/* Handle corrected bit flips gracefully */
-		if (ret < 0 && ret != -EUCLEAN)
+		if (ret < 0 && !mtd_is_bitflip(ret))
 			return -EIO;
 	}
 	return 0;
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 104052e..2ff601f 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -53,7 +53,7 @@
 	struct INFTLPartition *ip;
 	size_t retlen;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: find_boot_record(inftl=%p)\n", inftl);
+	pr_debug("INFTL: find_boot_record(inftl=%p)\n", inftl);
 
         /*
 	 * Assume logical EraseSize == physical erasesize for starting the
@@ -139,24 +139,20 @@
 		mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
 		mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-		if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
-			printk("INFTL: Media Header ->\n"
-				"    bootRecordID          = %s\n"
-				"    NoOfBootImageBlocks   = %d\n"
-				"    NoOfBinaryPartitions  = %d\n"
-				"    NoOfBDTLPartitions    = %d\n"
-				"    BlockMultiplerBits    = %d\n"
-				"    FormatFlgs            = %d\n"
-				"    OsakVersion           = 0x%x\n"
-				"    PercentUsed           = %d\n",
-				mh->bootRecordID, mh->NoOfBootImageBlocks,
-				mh->NoOfBinaryPartitions,
-				mh->NoOfBDTLPartitions,
-				mh->BlockMultiplierBits, mh->FormatFlags,
-				mh->OsakVersion, mh->PercentUsed);
-		}
-#endif
+		pr_debug("INFTL: Media Header ->\n"
+			 "    bootRecordID          = %s\n"
+			 "    NoOfBootImageBlocks   = %d\n"
+			 "    NoOfBinaryPartitions  = %d\n"
+			 "    NoOfBDTLPartitions    = %d\n"
+			 "    BlockMultiplerBits    = %d\n"
+			 "    FormatFlgs            = %d\n"
+			 "    OsakVersion           = 0x%x\n"
+			 "    PercentUsed           = %d\n",
+			 mh->bootRecordID, mh->NoOfBootImageBlocks,
+			 mh->NoOfBinaryPartitions,
+			 mh->NoOfBDTLPartitions,
+			 mh->BlockMultiplierBits, mh->FormatFlags,
+			 mh->OsakVersion, mh->PercentUsed);
 
 		if (mh->NoOfBDTLPartitions == 0) {
 			printk(KERN_WARNING "INFTL: Media Header sanity check "
@@ -200,19 +196,15 @@
 			ip->spareUnits = le32_to_cpu(ip->spareUnits);
 			ip->Reserved0 = le32_to_cpu(ip->Reserved0);
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-			if (CONFIG_MTD_DEBUG_VERBOSE >= 2) {
-				printk("    PARTITION[%d] ->\n"
-					"        virtualUnits    = %d\n"
-					"        firstUnit       = %d\n"
-					"        lastUnit        = %d\n"
-					"        flags           = 0x%x\n"
-					"        spareUnits      = %d\n",
-					i, ip->virtualUnits, ip->firstUnit,
-					ip->lastUnit, ip->flags,
-					ip->spareUnits);
-			}
-#endif
+			pr_debug("    PARTITION[%d] ->\n"
+				 "        virtualUnits    = %d\n"
+				 "        firstUnit       = %d\n"
+				 "        lastUnit        = %d\n"
+				 "        flags           = 0x%x\n"
+				 "        spareUnits      = %d\n",
+				 i, ip->virtualUnits, ip->firstUnit,
+				 ip->lastUnit, ip->flags,
+				 ip->spareUnits);
 
 			if (ip->Reserved0 != ip->firstUnit) {
 				struct erase_info *instr = &inftl->instr;
@@ -375,7 +367,7 @@
  *
  * Return: 0 when succeed, -1 on error.
  *
- * ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ * ToDo: 1. Is it necessary to check_free_sector after erasing ??
  */
 int INFTL_formatblock(struct INFTLrecord *inftl, int block)
 {
@@ -385,8 +377,7 @@
 	struct mtd_info *mtd = inftl->mbd.mtd;
 	int physblock;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p,"
-		"block=%d)\n", inftl, block);
+	pr_debug("INFTL: INFTL_formatblock(inftl=%p,block=%d)\n", inftl, block);
 
 	memset(instr, 0, sizeof(struct erase_info));
 
@@ -476,30 +467,30 @@
 {
 	int i;
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("VUtable[%d] ->", s->nb_blocks);
+	pr_debug("VUtable[%d] ->", s->nb_blocks);
 	for (i = 0; i < s->nb_blocks; i++) {
 		if ((i % 8) == 0)
-			printk("\n%04x: ", i);
-		printk("%04x ", s->VUtable[i]);
+			pr_debug("\n%04x: ", i);
+		pr_debug("%04x ", s->VUtable[i]);
 	}
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
+	pr_debug("PUtable[%d-%d=%d] ->", s->firstEUN, s->lastEUN, s->nb_blocks);
 	for (i = 0; i <= s->lastEUN; i++) {
 		if ((i % 8) == 0)
-			printk("\n%04x: ", i);
-		printk("%04x ", s->PUtable[i]);
+			pr_debug("\n%04x: ", i);
+		pr_debug("%04x ", s->PUtable[i]);
 	}
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("INFTL ->\n"
+	pr_debug("INFTL ->\n"
 		"  EraseSize       = %d\n"
 		"  h/s/c           = %d/%d/%d\n"
 		"  numvunits       = %d\n"
@@ -513,7 +504,7 @@
 		s->numvunits, s->firstEUN, s->lastEUN, s->numfreeEUNs,
 		s->LastFreeEUN, s->nb_blocks, s->nb_boot_blocks);
 
-	printk("\n-------------------------------------------"
+	pr_debug("\n-------------------------------------------"
 		"----------------------------------\n");
 }
 
@@ -521,25 +512,25 @@
 {
 	int logical, block, i;
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 
-	printk("INFTL Virtual Unit Chains:\n");
+	pr_debug("INFTL Virtual Unit Chains:\n");
 	for (logical = 0; logical < s->nb_blocks; logical++) {
 		block = s->VUtable[logical];
 		if (block > s->nb_blocks)
 			continue;
-		printk("  LOGICAL %d --> %d ", logical, block);
+		pr_debug("  LOGICAL %d --> %d ", logical, block);
 		for (i = 0; i < s->nb_blocks; i++) {
 			if (s->PUtable[block] == BLOCK_NIL)
 				break;
 			block = s->PUtable[block];
-			printk("%d ", block);
+			pr_debug("%d ", block);
 		}
-		printk("\n");
+		pr_debug("\n");
 	}
 
-	printk("-------------------------------------------"
+	pr_debug("-------------------------------------------"
 		"----------------------------------\n");
 }
 
@@ -555,7 +546,7 @@
 	int i;
 	u8 *ANACtable, ANAC;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_mount(inftl=%p)\n", s);
+	pr_debug("INFTL: INFTL_mount(inftl=%p)\n", s);
 
 	/* Search for INFTL MediaHeader and Spare INFTL Media Header */
 	if (find_boot_record(s) < 0) {
@@ -585,7 +576,7 @@
 	 * NOTEXPLORED state. Then at the end we will try to format it and
 	 * mark it as free.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 1, explore each unit\n");
+	pr_debug("INFTL: pass 1, explore each unit\n");
 	for (first_block = s->firstEUN; first_block <= s->lastEUN; first_block++) {
 		if (s->PUtable[first_block] != BLOCK_NOTEXPLORED)
 			continue;
@@ -717,17 +708,14 @@
 		logical_block = BLOCK_NIL;
 	}
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumptables(s);
-#endif
+	INFTL_dumptables(s);
 
 	/*
 	 * Second pass, check for infinite loops in chains. These are
 	 * possible because we don't update the previous pointers when
 	 * we fold chains. No big deal, just fix them up in PUtable.
 	 */
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 2, validate virtual chains\n");
+	pr_debug("INFTL: pass 2, validate virtual chains\n");
 	for (logical_block = 0; logical_block < s->numvunits; logical_block++) {
 		block = s->VUtable[logical_block];
 		last_block = BLOCK_NIL;
@@ -772,12 +760,8 @@
 		}
 	}
 
-#ifdef CONFIG_MTD_DEBUG_VERBOSE
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumptables(s);
-	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
-		INFTL_dumpVUchains(s);
-#endif
+	INFTL_dumptables(s);
+	INFTL_dumpVUchains(s);
 
 	/*
 	 * Third pass, format unreferenced blocks and init free block count.
@@ -785,7 +769,7 @@
 	s->numfreeEUNs = 0;
 	s->LastFreeEUN = BLOCK_NIL;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "INFTL: pass 3, format unused blocks\n");
+	pr_debug("INFTL: pass 3, format unused blocks\n");
 	for (block = s->firstEUN; block <= s->lastEUN; block++) {
 		if (s->PUtable[block] == BLOCK_NOTEXPLORED) {
 			printk("INFTL: unreferenced block %d, formatting it\n",
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 65655dd..1dca31d 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/pfow.h>
 #include <linux/mtd/qinfo.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 static int lpddr_read(struct mtd_info *mtd, loff_t adr, size_t len,
 					size_t *retlen, u_char *buf);
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index c0c328c..8e0c4bf9f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -41,8 +41,6 @@
 	  are mapped on your particular target board. Refer to the
 	  memory map which should hopefully be in the documentation for
 	  your board.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_LEN
 	hex "Physical length of flash mapping"
@@ -55,8 +53,6 @@
 	  than the total amount of flash present. Refer to the memory
 	  map which should hopefully be in the documentation for your
 	  board.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_BANKWIDTH
 	int "Bank width in octets"
@@ -67,8 +63,6 @@
 	  in octets. For example, if you have a data bus width of 32
 	  bits, you would set the bus width octet value to 4. This is
 	  used internally by the CFI drivers.
-	  Ignore this option if you use run-time physmap configuration
-	  (i.e., run-time calling physmap_configure()).
 
 config MTD_PHYSMAP_OF
 	tristate "Flash device in physical memory map based on OF description"
@@ -260,7 +254,6 @@
 config MTD_LANTIQ
 	tristate "Lantiq SoC NOR support"
 	depends on LANTIQ
-	select MTD_PARTITIONS
 	help
 	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
 
@@ -339,10 +332,6 @@
 	  This enables access to the flash chips on the Hitachi SolutionEngine and
 	  similar boards. Say 'Y' if you are building a kernel for such a board.
 
-config MTD_ARM_INTEGRATOR
-	tristate "CFI Flash device mapped on ARM Integrator/P720T"
-	depends on ARM && MTD_CFI
-
 config MTD_CDB89712
 	tristate "Cirrus CDB89712 evaluation board mappings"
 	depends on MTD_CFI && ARCH_CDB89712
@@ -398,13 +387,6 @@
 	  This enables access to the NV-RAM on autronix autcpu12 board.
 	  If you have such a board, say 'Y'.
 
-config MTD_EDB7312
-	tristate "CFI Flash device mapped on EDB7312"
-	depends on ARCH_EDB7312 && MTD_CFI
-	help
-	  This enables access to the CFI Flash on the Cogent EDB7312 board.
-	  If you have such a board, say 'Y' here.
-
 config MTD_IMPA7
 	tristate "JEDEC Flash device mapped on impA7"
 	depends on ARM && MTD_JEDECPROBE
@@ -412,14 +394,6 @@
 	  This enables access to the NOR Flash on the impA7 board of
 	  implementa GmbH. If you have such a board, say 'Y' here.
 
-config MTD_CEIVA
-	tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
-	depends on MTD_JEDECPROBE && ARCH_CEIVA
-	help
-	  This enables access to the flash chips on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-	  If you have such a device, say 'Y'.
-
 config MTD_H720X
 	tristate "Hynix evaluation board mappings"
 	depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index cb48b11..45dcb8b 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -19,7 +19,6 @@
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
 obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
-obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
@@ -40,7 +39,6 @@
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
-obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
 obj-$(CONFIG_MTD_FORTUNET)	+= fortunet.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c
index 608967f..736ca10 100644
--- a/drivers/mtd/maps/bcm963xx-flash.c
+++ b/drivers/mtd/maps/bcm963xx-flash.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 67815ee..6d6b2b5 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -41,7 +41,6 @@
 	uint32_t flash_ambctl0, flash_ambctl1;
 	uint32_t save_ambctl0, save_ambctl1;
 	unsigned long irq_flags;
-	struct mtd_partition *parts;
 };
 
 static void switch_to_flash(struct async_state *state)
@@ -165,18 +164,8 @@
 		return -ENXIO;
 	}
 
-	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
-	if (ret > 0) {
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
-		mtd_device_register(state->mtd, pdata->parts, ret);
-		state->parts = pdata->parts;
-	} else if (pdata->nr_parts) {
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
-		mtd_device_register(state->mtd, pdata->parts, pdata->nr_parts);
-	} else {
-		pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
-		mtd_device_register(state->mtd, NULL, 0);
-	}
+	mtd_device_parse_register(state->mtd, part_probe_types, 0,
+			pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, state);
 
@@ -188,7 +177,6 @@
 	struct async_state *state = platform_get_drvdata(pdev);
 	gpio_free(state->enet_flash_pin);
 	mtd_device_unregister(state->mtd);
-	kfree(state->parts);
 	map_destroy(state->mtd);
 	kfree(state);
 	return 0;
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
deleted file mode 100644
index 06f9c98..0000000
--- a/drivers/mtd/maps/ceiva.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Ceiva flash memory driver.
- * Copyright (C) 2002 Rob Scott <rscott@mtrob.fdns.net>
- *
- * Note: this driver supports jedec compatible devices. Modification
- * for CFI compatible devices should be straight forward: change
- * jedec_probe to cfi_probe.
- *
- * Based on: sa1100-flash.c, which has the following copyright:
- * Flash memory access on SA11x0 based devices
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-#include <asm/sizes.h>
-
-/*
- * This isn't complete yet, so...
- */
-#define CONFIG_MTD_CEIVA_STATICMAP
-
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-/*
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * Please note:
- *  1. The flash size given should be the largest flash size that can
- *     be accommodated.
- *
- *  2. The bus width must defined in clps_setup_flash.
- *
- * The MTD layer will detect flash chip aliasing and reduce the size of
- * the map accordingly.
- *
- */
-
-#ifdef CONFIG_ARCH_CEIVA
-/* Flash / Partition sizing */
-/* For the 28F8003, we use the block mapping to calcuate the sizes */
-#define MAX_SIZE_KiB                  (16 + 8 + 8 + 96 + (7*128))
-#define BOOT_PARTITION_SIZE_KiB       (16)
-#define PARAMS_PARTITION_SIZE_KiB     (8)
-#define KERNEL_PARTITION_SIZE_KiB     (4*128)
-/* Use both remaining portion of first flash, and all of second flash */
-#define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
-
-static struct mtd_partition ceiva_partitions[] = {
-	{
-		.name = "Ceiva BOOT partition",
-		.size   = BOOT_PARTITION_SIZE_KiB*1024,
-		.offset = 0,
-
-	},{
-		.name = "Ceiva parameters partition",
-		.size   = PARAMS_PARTITION_SIZE_KiB*1024,
-		.offset = (16 + 8) * 1024,
-	},{
-		.name = "Ceiva kernel partition",
-		.size = (KERNEL_PARTITION_SIZE_KiB)*1024,
-		.offset = 0x20000,
-
-	},{
-		.name = "Ceiva root filesystem partition",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (ROOT_PARTITION_SIZE_KiB)*1024,
-	}
-};
-#endif
-
-static int __init clps_static_partitions(struct mtd_partition **parts)
-{
-	int nb_parts = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		*parts       = ceiva_partitions;
-		nb_parts     = ARRAY_SIZE(ceiva_partitions);
-	}
-#endif
-	return nb_parts;
-}
-#endif
-
-struct clps_info {
-	unsigned long base;
-	unsigned long size;
-	int width;
-	void *vbase;
-	struct map_info *map;
-	struct mtd_info *mtd;
-	struct resource *res;
-};
-
-#define NR_SUBMTD 4
-
-static struct clps_info info[NR_SUBMTD];
-
-static int __init clps_setup_mtd(struct clps_info *clps, int nr, struct mtd_info **rmtd)
-{
-	struct mtd_info *subdev[nr];
-	struct map_info *maps;
-	int i, found = 0, ret = 0;
-
-	/*
-	 * Allocate the map_info structs in one go.
-	 */
-	maps = kzalloc(sizeof(struct map_info) * nr, GFP_KERNEL);
-	if (!maps)
-		return -ENOMEM;
-	/*
-	 * Claim and then map the memory regions.
-	 */
-	for (i = 0; i < nr; i++) {
-		if (clps[i].base == (unsigned long)-1)
-			break;
-
-		clps[i].res = request_mem_region(clps[i].base, clps[i].size, "clps flash");
-		if (!clps[i].res) {
-			ret = -EBUSY;
-			break;
-		}
-
-		clps[i].map = maps + i;
-
-		clps[i].map->name = "clps flash";
-		clps[i].map->phys = clps[i].base;
-
-		clps[i].vbase = ioremap(clps[i].base, clps[i].size);
-		if (!clps[i].vbase) {
-			ret = -ENOMEM;
-			break;
-		}
-
-		clps[i].map->virt = (void __iomem *)clps[i].vbase;
-		clps[i].map->bankwidth = clps[i].width;
-		clps[i].map->size = clps[i].size;
-
-		simple_map_init(&clps[i].map);
-
-		clps[i].mtd = do_map_probe("jedec_probe", clps[i].map);
-		if (clps[i].mtd == NULL) {
-			ret = -ENXIO;
-			break;
-		}
-		clps[i].mtd->owner = THIS_MODULE;
-		subdev[i] = clps[i].mtd;
-
-		printk(KERN_INFO "clps flash: JEDEC device at 0x%08lx, %dMiB, "
-			"%d-bit\n", clps[i].base, clps[i].mtd->size >> 20,
-			clps[i].width * 8);
-		found += 1;
-	}
-
-	/*
-	 * ENXIO is special.  It means we didn't find a chip when
-	 * we probed.  We need to tear down the mapping, free the
-	 * resource and mark it as such.
-	 */
-	if (ret == -ENXIO) {
-		iounmap(clps[i].vbase);
-		clps[i].vbase = NULL;
-		release_resource(clps[i].res);
-		clps[i].res = NULL;
-	}
-
-	/*
-	 * If we found one device, don't bother with concat support.
-	 * If we found multiple devices, use concat if we have it
-	 * available, otherwise fail.
-	 */
-	if (ret == 0 || ret == -ENXIO) {
-		if (found == 1) {
-			*rmtd = subdev[0];
-			ret = 0;
-		} else if (found > 1) {
-			/*
-			 * We detected multiple devices.  Concatenate
-			 * them together.
-			 */
-			*rmtd = mtd_concat_create(subdev, found,
-						  "clps flash");
-			if (*rmtd == NULL)
-				ret = -ENXIO;
-		}
-	}
-
-	/*
-	 * If we failed, clean up.
-	 */
-	if (ret) {
-		do {
-			if (clps[i].mtd)
-				map_destroy(clps[i].mtd);
-			if (clps[i].vbase)
-				iounmap(clps[i].vbase);
-			if (clps[i].res)
-				release_resource(clps[i].res);
-		} while (i--);
-
-		kfree(maps);
-	}
-
-	return ret;
-}
-
-static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd)
-{
-	int i;
-
-	mtd_device_unregister(mtd);
-
-	if (mtd != clps[0].mtd)
-		mtd_concat_destroy(mtd);
-
-	for (i = NR_SUBMTD; i >= 0; i--) {
-		if (clps[i].mtd)
-			map_destroy(clps[i].mtd);
-		if (clps[i].vbase)
-			iounmap(clps[i].vbase);
-		if (clps[i].res)
-			release_resource(clps[i].res);
-	}
-	kfree(clps[0].map);
-}
-
-/*
- * We define the memory space, size, and width for the flash memory
- * space here.
- */
-
-static int __init clps_setup_flash(void)
-{
-	int nr = 0;
-
-#ifdef CONFIG_ARCH_CEIVA
-	if (machine_is_ceiva()) {
-		info[0].base = CS0_PHYS_BASE;
-		info[0].size = SZ_32M;
-		info[0].width = CEIVA_FLASH_WIDTH;
-		info[1].base = CS1_PHYS_BASE;
-		info[1].size = SZ_32M;
-		info[1].width = CEIVA_FLASH_WIDTH;
-		nr = 2;
-	}
-#endif
-	return nr;
-}
-
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static void __init clps_locate_partitions(struct mtd_info *mtd)
-{
-	const char *part_type = NULL;
-	int nr_parts = 0;
-	do {
-		/*
-		 * Partition selection stuff.
-		 */
-		nr_parts = parse_mtd_partitions(mtd, probes, &parsed_parts, 0);
-		if (nr_parts > 0) {
-			part_type = "command line";
-			break;
-		}
-#ifdef CONFIG_MTD_CEIVA_STATICMAP
-		nr_parts = clps_static_partitions(&parsed_parts);
-		if (nr_parts > 0) {
-			part_type = "static";
-			break;
-		}
-		printk("found: %d partitions\n", nr_parts);
-#endif
-	} while (0);
-
-	if (nr_parts == 0) {
-		printk(KERN_NOTICE "clps flash: no partition info "
-			"available, registering whole flash\n");
-		mtd_device_register(mtd, NULL, 0);
-	} else {
-		printk(KERN_NOTICE "clps flash: using %s partition "
-			"definition\n", part_type);
-		mtd_device_register(mtd, parsed_parts, nr_parts);
-	}
-
-	/* Always succeeds. */
-}
-
-static void __exit clps_destroy_partitions(void)
-{
-	kfree(parsed_parts);
-}
-
-static struct mtd_info *mymtd;
-
-static int __init clps_mtd_init(void)
-{
-	int ret;
-	int nr;
-
-	nr = clps_setup_flash();
-	if (nr < 0)
-		return nr;
-
-	ret = clps_setup_mtd(info, nr, &mymtd);
-	if (ret)
-		return ret;
-
-	clps_locate_partitions(mymtd);
-
-	return 0;
-}
-
-static void __exit clps_mtd_cleanup(void)
-{
-	clps_destroy_mtd(info, mymtd);
-	clps_destroy_partitions();
-}
-
-module_init(clps_mtd_init);
-module_exit(clps_mtd_cleanup);
-
-MODULE_AUTHOR("Rob Scott");
-MODULE_DESCRIPTION("Cirrus Logic JEDEC map driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 7a9e198..f43b365 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -145,14 +145,10 @@
 
 
 /* Partition stuff */
-static struct mtd_partition *dc21285_parts;
 static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 static int __init init_dc21285(void)
 {
-
-	int nrparts;
-
 	/* Determine bankwidth */
 	switch (*CSR_SA110_CNTL & (3<<14)) {
 		case SA110_CNTL_ROMWIDTH_8:
@@ -200,8 +196,7 @@
 
 	dc21285_mtd->owner = THIS_MODULE;
 
-	nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0);
-	mtd_device_register(dc21285_mtd, dc21285_parts, nrparts);
+	mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0);
 
 	if(machine_is_ebsa285()) {
 		/*
@@ -224,8 +219,6 @@
 static void __exit cleanup_dc21285(void)
 {
 	mtd_device_unregister(dc21285_mtd);
-	if (dc21285_parts)
-		kfree(dc21285_parts);
 	map_destroy(dc21285_mtd);
 	iounmap(dc21285_map.virt);
 }
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
deleted file mode 100644
index fe42a21..0000000
--- a/drivers/mtd/maps/edb7312.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Handle mapping of the NOR flash on Cogent EDB7312 boards
- *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#define WINDOW_ADDR 0x00000000      /* physical properties of flash */
-#define WINDOW_SIZE 0x01000000
-#define BUSWIDTH    2
-#define FLASH_BLOCKSIZE_MAIN	0x20000
-#define FLASH_NUMBLOCKS_MAIN	128
-/* can be "cfi_probe", "jedec_probe", "map_rom", NULL }; */
-#define PROBETYPES { "cfi_probe", NULL }
-
-#define MSG_PREFIX "EDB7312-NOR:"   /* prefix for our printk()'s */
-#define MTDID      "edb7312-nor"    /* for mtdparts= partitioning */
-
-static struct mtd_info *mymtd;
-
-struct map_info edb7312nor_map = {
-	.name = "NOR flash on EDB7312",
-	.size = WINDOW_SIZE,
-	.bankwidth = BUSWIDTH,
-	.phys = WINDOW_ADDR,
-};
-
-/*
- * MTD partitioning stuff
- */
-static struct mtd_partition static_partitions[3] =
-{
-	{
-		.name = "ARMboot",
-		.size = 0x40000,
-		.offset = 0
-	},
-	{
-		.name = "Kernel",
-		.size = 0x200000,
-		.offset = 0x40000
-	},
-	{
-		.name = "RootFS",
-		.size = 0xDC0000,
-		.offset = 0x240000
-	},
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int                   mtd_parts_nb = 0;
-static struct mtd_partition *mtd_parts    = 0;
-
-static int __init init_edb7312nor(void)
-{
-	static const char *rom_probe_types[] = PROBETYPES;
-	const char **type;
-	const char *part_type = 0;
-
-       	printk(KERN_NOTICE MSG_PREFIX "0x%08x at 0x%08x\n",
-	       WINDOW_SIZE, WINDOW_ADDR);
-	edb7312nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	if (!edb7312nor_map.virt) {
-		printk(MSG_PREFIX "failed to ioremap\n");
-		return -EIO;
-	}
-
-	simple_map_init(&edb7312nor_map);
-
-	mymtd = 0;
-	type = rom_probe_types;
-	for(; !mymtd && *type; type++) {
-		mymtd = do_map_probe(*type, &edb7312nor_map);
-	}
-	if (mymtd) {
-		mymtd->owner = THIS_MODULE;
-
-		mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID);
-		if (mtd_parts_nb > 0)
-			part_type = "detected";
-
-		if (mtd_parts_nb == 0) {
-			mtd_parts = static_partitions;
-			mtd_parts_nb = ARRAY_SIZE(static_partitions);
-			part_type = "static";
-		}
-
-		if (mtd_parts_nb == 0)
-			printk(KERN_NOTICE MSG_PREFIX "no partition info available\n");
-		else
-			printk(KERN_NOTICE MSG_PREFIX
-			       "using %s partition definition\n", part_type);
-		/* Register the whole device first. */
-		mtd_device_register(mymtd, NULL, 0);
-		mtd_device_register(mymtd, mtd_parts, mtd_parts_nb);
-		return 0;
-	}
-
-	iounmap((void *)edb7312nor_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_edb7312nor(void)
-{
-	if (mymtd) {
-		mtd_device_unregister(mymtd);
-		map_destroy(mymtd);
-	}
-	if (edb7312nor_map.virt) {
-		iounmap((void *)edb7312nor_map.virt);
-		edb7312nor_map.virt = 0;
-	}
-}
-
-module_init(init_edb7312nor);
-module_exit(cleanup_edb7312nor);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("Generic configurable MTD map driver");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 7568c5f..1ec66f0 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -187,7 +187,6 @@
  */
 static int __devinit gpio_flash_probe(struct platform_device *pdev)
 {
-	int nr_parts;
 	size_t i, arr_size;
 	struct physmap_flash_data *pdata;
 	struct resource *memory;
@@ -252,20 +251,9 @@
 		return -ENXIO;
 	}
 
-	nr_parts = parse_mtd_partitions(state->mtd, part_probe_types,
-					&pdata->parts, 0);
-	if (nr_parts > 0) {
-		pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
-		kfree(pdata->parts);
-	} else if (pdata->nr_parts) {
-		pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
-		nr_parts = pdata->nr_parts;
-	} else {
-		pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
-		nr_parts = 0;
-	}
 
-	mtd_device_register(state->mtd, pdata->parts, nr_parts);
+	mtd_device_parse_register(state->mtd, part_probe_types, 0,
+			pdata->parts, pdata->nr_parts);
 
 	return 0;
 }
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 7f03586..49c1418 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -58,18 +58,11 @@
 
 #define NUM_PARTITIONS ARRAY_SIZE(h720x_partitions)
 
-static int                   nr_mtd_parts;
-static struct mtd_partition *mtd_parts;
-static const char *probes[] = { "cmdlinepart", NULL };
-
 /*
  * Initialize FLASH support
  */
 static int __init h720x_mtd_init(void)
 {
-
-	char	*part_type = NULL;
-
 	h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size);
 
 	if (!h720x_map.virt) {
@@ -92,16 +85,8 @@
 	if (mymtd) {
 		mymtd->owner = THIS_MODULE;
 
-		nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0);
-		if (nr_mtd_parts > 0)
-			part_type = "command line";
-		if (nr_mtd_parts <= 0) {
-			mtd_parts = h720x_partitions;
-			nr_mtd_parts = NUM_PARTITIONS;
-			part_type = "builtin";
-		}
-		printk(KERN_INFO "Using %s partition table\n", part_type);
-		mtd_device_register(mymtd, mtd_parts, nr_mtd_parts);
+		mtd_device_parse_register(mymtd, NULL, 0,
+				h720x_partitions, NUM_PARTITIONS);
 		return 0;
 	}
 
@@ -120,10 +105,6 @@
 		map_destroy(mymtd);
 	}
 
-	/* Free partition info, if commandline partition was used */
-	if (mtd_parts && (mtd_parts != h720x_partitions))
-		kfree (mtd_parts);
-
 	if (h720x_map.virt) {
 		iounmap((void *)h720x_map.virt);
 		h720x_map.virt = 0;
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index 404a50c..f47aedb 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -49,7 +49,7 @@
 /*
  * MTD partitioning stuff
  */
-static struct mtd_partition static_partitions[] =
+static struct mtd_partition partitions[] =
 {
 	{
 		.name = "FileSystem",
@@ -58,16 +58,10 @@
 	},
 };
 
-static int mtd_parts_nb[NUM_FLASHBANKS];
-static struct mtd_partition *mtd_parts[NUM_FLASHBANKS];
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
 static int __init init_impa7(void)
 {
 	static const char *rom_probe_types[] = PROBETYPES;
 	const char **type;
-	const char *part_type = 0;
 	int i;
 	static struct { u_long addr; u_long size; } pt[NUM_FLASHBANKS] = {
 	  { WINDOW_ADDR0, WINDOW_SIZE0 },
@@ -97,23 +91,9 @@
 		if (impa7_mtd[i]) {
 			impa7_mtd[i]->owner = THIS_MODULE;
 			devicesfound++;
-			mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i],
-							       probes,
-							       &mtd_parts[i],
-							       0);
-			if (mtd_parts_nb[i] > 0) {
-				part_type = "command line";
-			} else {
-				mtd_parts[i] = static_partitions;
-				mtd_parts_nb[i] = ARRAY_SIZE(static_partitions);
-				part_type = "static";
-			}
-
-			printk(KERN_NOTICE MSG_PREFIX
-			       "using %s partition definition\n",
-			       part_type);
-			mtd_device_register(impa7_mtd[i],
-					    mtd_parts[i], mtd_parts_nb[i]);
+			mtd_device_parse_register(impa7_mtd[i], NULL, 0,
+						  partitions,
+						  ARRAY_SIZE(partitions));
 		}
 		else
 			iounmap((void *)impa7_map[i].virt);
diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c
index d2f47be..08c2396 100644
--- a/drivers/mtd/maps/intel_vr_nor.c
+++ b/drivers/mtd/maps/intel_vr_nor.c
@@ -44,7 +44,6 @@
 	void __iomem *csr_base;
 	struct map_info map;
 	struct mtd_info *info;
-	int nr_parts;
 	struct pci_dev *dev;
 };
 
@@ -71,13 +70,9 @@
 
 static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
 {
-	struct mtd_partition *parts;
-	static const char *part_probes[] = { "cmdlinepart", NULL };
-
 	/* register the flash bank */
 	/* partition the flash bank */
-	p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0);
-	return mtd_device_register(p->info, parts, p->nr_parts);
+	return mtd_device_parse_register(p->info, NULL, 0, NULL, 0);
 }
 
 static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index 1594a80..437fcd2 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -38,7 +38,6 @@
 struct ixp2000_flash_info {
 	struct		mtd_info *mtd;
 	struct		map_info map;
-	struct		mtd_partition *partitions;
 	struct		resource *res;
 };
 
@@ -125,8 +124,6 @@
 	if (info->map.map_priv_1)
 		iounmap((void *) info->map.map_priv_1);
 
-	kfree(info->partitions);
-
 	if (info->res) {
 		release_resource(info->res);
 		kfree(info->res);
@@ -229,13 +226,7 @@
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-	if (err > 0) {
-		err = mtd_device_register(info->mtd, info->partitions, err);
-		if(err)
-			dev_err(&dev->dev, "Could not parse partitions\n");
-	}
-
+	err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
 	if (err)
 		goto Error;
 
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 155b219..3040901 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -145,7 +145,6 @@
 struct ixp4xx_flash_info {
 	struct mtd_info *mtd;
 	struct map_info map;
-	struct mtd_partition *partitions;
 	struct resource *res;
 };
 
@@ -168,8 +167,6 @@
 	if (info->map.virt)
 		iounmap(info->map.virt);
 
-	kfree(info->partitions);
-
 	if (info->res) {
 		release_resource(info->res);
 		kfree(info->res);
@@ -185,8 +182,6 @@
 {
 	struct flash_platform_data *plat = dev->dev.platform_data;
 	struct ixp4xx_flash_info *info;
-	const char *part_type = NULL;
-	int nr_parts = 0;
 	int err = -1;
 
 	if (!plat)
@@ -252,28 +247,12 @@
 	/* Use the fast version */
 	info->map.write = ixp4xx_write16;
 
-	nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
-					dev->resource->start);
-	if (nr_parts > 0) {
-		part_type = "dynamic";
-	} else {
-		info->partitions = plat->parts;
-		nr_parts = plat->nr_parts;
-		part_type = "static";
-	}
-	if (nr_parts == 0)
-		printk(KERN_NOTICE "IXP4xx flash: no partition info "
-			"available, registering whole flash\n");
-	else
-		printk(KERN_NOTICE "IXP4xx flash: using %s partition "
-			"definition\n", part_type);
-
-	err = mtd_device_register(info->mtd, info->partitions, nr_parts);
-	if (err)
+	err = mtd_device_parse_register(info->mtd, probes, dev->resource->start,
+			plat->parts, plat->nr_parts);
+	if (err) {
 		printk(KERN_ERR "Could not parse partitions\n");
-
-	if (err)
 		goto Error;
+	}
 
 	return 0;
 
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index a90cabd..4f10e27 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -107,16 +107,12 @@
 	spin_unlock_irqrestore(&ebu_lock, flags);
 }
 
-static const char const *part_probe_types[] = { "cmdlinepart", NULL };
-
 static int __init
 ltq_mtd_probe(struct platform_device *pdev)
 {
 	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
 	struct ltq_mtd *ltq_mtd;
-	struct mtd_partition *parts;
 	struct resource *res;
-	int nr_parts = 0;
 	struct cfi_private *cfi;
 	int err;
 
@@ -172,17 +168,8 @@
 	cfi->addr_unlock1 ^= 1;
 	cfi->addr_unlock2 ^= 1;
 
-	nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
-				part_probe_types, &parts, 0);
-	if (nr_parts > 0) {
-		dev_info(&pdev->dev,
-			"using %d partitions from cmdline", nr_parts);
-	} else {
-		nr_parts = ltq_mtd_data->nr_parts;
-		parts = ltq_mtd_data->parts;
-	}
-
-	err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+	err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0,
+			ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
 	if (err) {
 		dev_err(&pdev->dev, "failed to add partitions\n");
 		goto err_destroy;
@@ -208,7 +195,7 @@
 
 	if (ltq_mtd) {
 		if (ltq_mtd->mtd) {
-			del_mtd_partitions(ltq_mtd->mtd);
+			mtd_device_unregister(ltq_mtd->mtd);
 			map_destroy(ltq_mtd->mtd);
 		}
 		if (ltq_mtd->map->virt)
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
index 5936c46..119baa7 100644
--- a/drivers/mtd/maps/latch-addr-flash.c
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -33,9 +33,6 @@
 	/* cache; could be found out of res */
 	unsigned long		win_mask;
 
-	int			nr_parts;
-	struct mtd_partition	*parts;
-
 	spinlock_t		lock;
 };
 
@@ -97,8 +94,6 @@
 
 static char *rom_probe_types[] = { "cfi_probe", NULL };
 
-static char *part_probe_types[] = { "cmdlinepart", NULL };
-
 static int latch_addr_flash_remove(struct platform_device *dev)
 {
 	struct latch_addr_flash_info *info;
@@ -112,8 +107,6 @@
 	latch_addr_data = dev->dev.platform_data;
 
 	if (info->mtd != NULL) {
-		if (info->nr_parts)
-			kfree(info->parts);
 		mtd_device_unregister(info->mtd);
 		map_destroy(info->mtd);
 	}
@@ -206,21 +199,8 @@
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	err = parse_mtd_partitions(info->mtd, (const char **)part_probe_types,
-				   &info->parts, 0);
-	if (err > 0) {
-		mtd_device_register(info->mtd, info->parts, err);
-		return 0;
-	}
-	if (latch_addr_data->nr_parts) {
-		pr_notice("Using latch-addr-flash partition information\n");
-		mtd_device_register(info->mtd,
-				    latch_addr_data->parts,
-				    latch_addr_data->nr_parts);
-		return 0;
-	}
-
-	mtd_device_register(info->mtd, NULL, 0);
+	mtd_device_parse_register(info->mtd, NULL, 0,
+			latch_addr_data->parts, latch_addr_data->nr_parts);
 	return 0;
 
 iounmap:
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index bbe168b..e8e9fec 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -22,22 +22,6 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 
-#ifdef CONFIG_MTD_DEBUG
-static int debug = CONFIG_MTD_DEBUG_VERBOSE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Set Debug Level 0=quiet, 5=noisy");
-#undef DEBUG
-#define DEBUG(n, format, arg...) \
-	if (n <= debug) {	 \
-		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
-	}
-
-#else
-#undef DEBUG
-#define DEBUG(n, arg...)
-static const int debug = 0;
-#endif
-
 #define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
 
 #define DRIVER_DESC	"PCMCIA Flash memory card driver"
@@ -105,13 +89,13 @@
 	int ret;
 
 	if (!pcmcia_dev_present(dev->p_dev)) {
-		DEBUG(1, "device removed");
+		pr_debug("device removed\n");
 		return 0;
 	}
 
 	offset = to & ~(dev->win_size-1);
 	if (offset != dev->offset) {
-		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
+		pr_debug("Remapping window from 0x%8.8x to 0x%8.8x\n",
 		      dev->offset, offset);
 		ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
 		if (ret != 0)
@@ -132,7 +116,7 @@
 		return d;
 
 	d.x[0] = readb(addr);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx", ofs, addr, d.x[0]);
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n", ofs, addr, d.x[0]);
 	return d;
 }
 
@@ -147,7 +131,7 @@
 		return d;
 
 	d.x[0] = readw(addr);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx", ofs, addr, d.x[0]);
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n", ofs, addr, d.x[0]);
 	return d;
 }
 
@@ -157,7 +141,7 @@
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	unsigned long win_size = dev->win_size;
 
-	DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+	pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
 	while(len) {
 		int toread = win_size - (from & (win_size-1));
 		caddr_t addr;
@@ -169,7 +153,7 @@
 		if(!addr)
 			return;
 
-		DEBUG(4, "memcpy from %p to %p len = %d", addr, to, toread);
+		pr_debug("memcpy from %p to %p len = %d\n", addr, to, toread);
 		memcpy_fromio(to, addr, toread);
 		len -= toread;
 		to += toread;
@@ -185,7 +169,7 @@
 	if(!addr)
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02lx", adr, addr, d.x[0]);
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%02lx\n", adr, addr, d.x[0]);
 	writeb(d.x[0], addr);
 }
 
@@ -196,7 +180,7 @@
 	if(!addr)
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04lx", adr, addr, d.x[0]);
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%04lx\n", adr, addr, d.x[0]);
 	writew(d.x[0], addr);
 }
 
@@ -206,7 +190,7 @@
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	unsigned long win_size = dev->win_size;
 
-	DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+	pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
 	while(len) {
 		int towrite = win_size - (to & (win_size-1));
 		caddr_t addr;
@@ -218,7 +202,7 @@
 		if(!addr)
 			return;
 
-		DEBUG(4, "memcpy from %p to %p len = %d", from, addr, towrite);
+		pr_debug("memcpy from %p to %p len = %d\n", from, addr, towrite);
 		memcpy_toio(addr, from, towrite);
 		len -= towrite;
 		to += towrite;
@@ -240,7 +224,7 @@
 		return d;
 
 	d.x[0] = readb(win_base + ofs);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%02lx",
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%02lx\n",
 	      ofs, win_base + ofs, d.x[0]);
 	return d;
 }
@@ -255,7 +239,7 @@
 		return d;
 
 	d.x[0] = readw(win_base + ofs);
-	DEBUG(3, "ofs = 0x%08lx (%p) data = 0x%04lx",
+	pr_debug("ofs = 0x%08lx (%p) data = 0x%04lx\n",
 	      ofs, win_base + ofs, d.x[0]);
 	return d;
 }
@@ -268,7 +252,7 @@
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "to = %p from = %lu len = %zd", to, from, len);
+	pr_debug("to = %p from = %lu len = %zd\n", to, from, len);
 	memcpy_fromio(to, win_base + from, len);
 }
 
@@ -280,7 +264,7 @@
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%02lx",
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%02lx\n",
 	      adr, win_base + adr, d.x[0]);
 	writeb(d.x[0], win_base + adr);
 }
@@ -293,7 +277,7 @@
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "adr = 0x%08lx (%p)  data = 0x%04lx",
+	pr_debug("adr = 0x%08lx (%p)  data = 0x%04lx\n",
 	      adr, win_base + adr, d.x[0]);
 	writew(d.x[0], win_base + adr);
 }
@@ -306,7 +290,7 @@
 	if(DEV_REMOVED(map))
 		return;
 
-	DEBUG(3, "to = %lu from = %p len = %zd", to, from, len);
+	pr_debug("to = %lu from = %p len = %zd\n", to, from, len);
 	memcpy_toio(win_base + to, from, len);
 }
 
@@ -316,7 +300,7 @@
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	struct pcmcia_device *link = dev->p_dev;
 
-	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
+	pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
 	pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
 }
 
@@ -325,7 +309,7 @@
 {
 	struct pcmciamtd_dev *dev = link->priv;
 
-	DEBUG(3, "link = 0x%p", link);
+	pr_debug("link = 0x%p\n", link);
 
 	if (link->resource[2]->end) {
 		if(dev->win_base) {
@@ -337,7 +321,6 @@
 }
 
 
-#ifdef CONFIG_MTD_DEBUG
 static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
 				tuple_t *tuple,
 				void *priv_data)
@@ -347,7 +330,7 @@
 	if (!pcmcia_parse_tuple(tuple, &parse)) {
 		cistpl_format_t *t = &parse.format;
 		(void)t; /* Shut up, gcc */
-		DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+		pr_debug("Format type: %u, Error Detection: %u, offset = %u, length =%u\n",
 			t->type, t->edc, t->offset, t->length);
 	}
 	return -ENOSPC;
@@ -363,12 +346,11 @@
 	if (!pcmcia_parse_tuple(tuple, &parse)) {
 		cistpl_jedec_t *t = &parse.jedec;
 		for (i = 0; i < t->nid; i++)
-			DEBUG(2, "JEDEC: 0x%02x 0x%02x",
+			pr_debug("JEDEC: 0x%02x 0x%02x\n",
 			      t->id[i].mfr, t->id[i].info);
 	}
 	return -ENOSPC;
 }
-#endif
 
 static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
 				tuple_t *tuple,
@@ -382,14 +364,14 @@
 	if (pcmcia_parse_tuple(tuple, &parse))
 		return -EINVAL;
 
-	DEBUG(2, "Common memory:");
+	pr_debug("Common memory:\n");
 	dev->pcmcia_map.size = t->dev[0].size;
 	/* from here on: DEBUG only */
 	for (i = 0; i < t->ndev; i++) {
-		DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
-		DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
-		DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
-		DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+		pr_debug("Region %d, type = %u\n", i, t->dev[i].type);
+		pr_debug("Region %d, wp = %u\n", i, t->dev[i].wp);
+		pr_debug("Region %d, speed = %u ns\n", i, t->dev[i].speed);
+		pr_debug("Region %d, size = %u bytes\n", i, t->dev[i].size);
 	}
 	return 0;
 }
@@ -409,12 +391,12 @@
 	dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
 	/* from here on: DEBUG only */
 	for (i = 0; i < t->ngeo; i++) {
-		DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
-		DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
-		DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
-		DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
-		DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
-		DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+		pr_debug("region: %d bankwidth = %u\n", i, t->geo[i].buswidth);
+		pr_debug("region: %d erase_block = %u\n", i, t->geo[i].erase_block);
+		pr_debug("region: %d read_block = %u\n", i, t->geo[i].read_block);
+		pr_debug("region: %d write_block = %u\n", i, t->geo[i].write_block);
+		pr_debug("region: %d partition = %u\n", i, t->geo[i].partition);
+		pr_debug("region: %d interleave = %u\n", i, t->geo[i].interleave);
 	}
 	return 0;
 }
@@ -432,13 +414,11 @@
 			if (p_dev->prod_id[i])
 				strcat(dev->mtd_name, p_dev->prod_id[i]);
 		}
-		DEBUG(2, "Found name: %s", dev->mtd_name);
+		pr_debug("Found name: %s\n", dev->mtd_name);
 	}
 
-#ifdef CONFIG_MTD_DEBUG
 	pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
 	pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
-#endif
 	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
 	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
 
@@ -450,12 +430,12 @@
 
 	if(force_size) {
 		dev->pcmcia_map.size = force_size << 20;
-		DEBUG(2, "size forced to %dM", force_size);
+		pr_debug("size forced to %dM\n", force_size);
 	}
 
 	if(bankwidth) {
 		dev->pcmcia_map.bankwidth = bankwidth;
-		DEBUG(2, "bankwidth forced to %d", bankwidth);
+		pr_debug("bankwidth forced to %d\n", bankwidth);
 	}
 
 	dev->pcmcia_map.name = dev->mtd_name;
@@ -464,7 +444,7 @@
 		*new_name = 1;
 	}
 
-	DEBUG(1, "Device: Size: %lu Width:%d Name: %s",
+	pr_debug("Device: Size: %lu Width:%d Name: %s\n",
 	      dev->pcmcia_map.size,
 	      dev->pcmcia_map.bankwidth << 3, dev->mtd_name);
 }
@@ -479,7 +459,7 @@
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
 	int new_name = 0;
 
-	DEBUG(3, "link=0x%p", link);
+	pr_debug("link=0x%p\n", link);
 
 	card_settings(dev, link, &new_name);
 
@@ -512,11 +492,11 @@
 
 	do {
 		int ret;
-		DEBUG(2, "requesting window with size = %luKiB memspeed = %d",
+		pr_debug("requesting window with size = %luKiB memspeed = %d\n",
 			(unsigned long) resource_size(link->resource[2]) >> 10,
 			mem_speed);
 		ret = pcmcia_request_window(link, link->resource[2], mem_speed);
-		DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
+		pr_debug("ret = %d dev->win_size = %d\n", ret, dev->win_size);
 		if(ret) {
 			j++;
 			link->resource[2]->start = 0;
@@ -524,21 +504,21 @@
 					force_size << 20 : MAX_PCMCIA_ADDR;
 			link->resource[2]->end >>= j;
 		} else {
-			DEBUG(2, "Got window of size %luKiB", (unsigned long)
+			pr_debug("Got window of size %luKiB\n", (unsigned long)
 				resource_size(link->resource[2]) >> 10);
 			dev->win_size = resource_size(link->resource[2]);
 			break;
 		}
 	} while (link->resource[2]->end >= 0x1000);
 
-	DEBUG(2, "dev->win_size = %d", dev->win_size);
+	pr_debug("dev->win_size = %d\n", dev->win_size);
 
 	if(!dev->win_size) {
 		dev_err(&dev->p_dev->dev, "Cannot allocate memory window\n");
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
-	DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
+	pr_debug("Allocated a window of %dKiB\n", dev->win_size >> 10);
 
 	/* Get write protect status */
 	dev->win_base = ioremap(link->resource[2]->start,
@@ -549,7 +529,7 @@
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
-	DEBUG(1, "mapped window dev = %p @ %pR, base = %p",
+	pr_debug("mapped window dev = %p @ %pR, base = %p\n",
 	      dev, link->resource[2], dev->win_base);
 
 	dev->offset = 0;
@@ -564,7 +544,7 @@
 	}
 
 	link->config_index = 0;
-	DEBUG(2, "Setting Configuration");
+	pr_debug("Setting Configuration\n");
 	ret = pcmcia_enable_device(link);
 	if (ret != 0) {
 		if (dev->win_base) {
@@ -580,17 +560,17 @@
 		mtd = do_map_probe("map_rom", &dev->pcmcia_map);
 	} else {
 		for(i = 0; i < ARRAY_SIZE(probes); i++) {
-			DEBUG(1, "Trying %s", probes[i]);
+			pr_debug("Trying %s\n", probes[i]);
 			mtd = do_map_probe(probes[i], &dev->pcmcia_map);
 			if(mtd)
 				break;
 
-			DEBUG(1, "FAILED: %s", probes[i]);
+			pr_debug("FAILED: %s\n", probes[i]);
 		}
 	}
 
 	if(!mtd) {
-		DEBUG(1, "Can not find an MTD");
+		pr_debug("Can not find an MTD\n");
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
@@ -617,7 +597,7 @@
 	/* If the memory found is fits completely into the mapped PCMCIA window,
 	   use the faster non-remapping read/write functions */
 	if(mtd->size <= dev->win_size) {
-		DEBUG(1, "Using non remapping memory functions");
+		pr_debug("Using non remapping memory functions\n");
 		dev->pcmcia_map.map_priv_2 = (unsigned long)dev->win_base;
 		if (dev->pcmcia_map.bankwidth == 1) {
 			dev->pcmcia_map.read = pcmcia_read8;
@@ -645,7 +625,7 @@
 
 static int pcmciamtd_suspend(struct pcmcia_device *dev)
 {
-	DEBUG(2, "EVENT_PM_RESUME");
+	pr_debug("EVENT_PM_RESUME\n");
 
 	/* get_lock(link); */
 
@@ -654,7 +634,7 @@
 
 static int pcmciamtd_resume(struct pcmcia_device *dev)
 {
-	DEBUG(2, "EVENT_PM_SUSPEND");
+	pr_debug("EVENT_PM_SUSPEND\n");
 
 	/* free_lock(link); */
 
@@ -666,7 +646,7 @@
 {
 	struct pcmciamtd_dev *dev = link->priv;
 
-	DEBUG(3, "link=0x%p", link);
+	pr_debug("link=0x%p\n", link);
 
 	if(dev->mtd_info) {
 		mtd_device_unregister(dev->mtd_info);
@@ -686,7 +666,7 @@
 	/* Create new memory card device */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) return -ENOMEM;
-	DEBUG(1, "dev=0x%p", dev);
+	pr_debug("dev=0x%p\n", dev);
 
 	dev->p_dev = link;
 	link->priv = dev;
@@ -755,7 +735,7 @@
 
 static void __exit exit_pcmciamtd(void)
 {
-	DEBUG(1, DRIVER_DESC " unloading");
+	pr_debug(DRIVER_DESC " unloading");
 	pcmcia_unregister_driver(&pcmciamtd_driver);
 }
 
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index f64cee4..66e8200 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -27,8 +27,6 @@
 	struct mtd_info		*mtd[MAX_RESOURCES];
 	struct mtd_info		*cmtd;
 	struct map_info		map[MAX_RESOURCES];
-	int			nr_parts;
-	struct mtd_partition	*parts;
 };
 
 static int physmap_flash_remove(struct platform_device *dev)
@@ -46,8 +44,6 @@
 
 	if (info->cmtd) {
 		mtd_device_unregister(info->cmtd);
-		if (info->nr_parts)
-			kfree(info->parts);
 		if (info->cmtd != info->mtd[0])
 			mtd_concat_destroy(info->cmtd);
 	}
@@ -175,23 +171,8 @@
 	if (err)
 		goto err_out;
 
-	err = parse_mtd_partitions(info->cmtd, part_probe_types,
-				   &info->parts, 0);
-	if (err > 0) {
-		mtd_device_register(info->cmtd, info->parts, err);
-		info->nr_parts = err;
-		return 0;
-	}
-
-	if (physmap_data->nr_parts) {
-		printk(KERN_NOTICE "Using physmap partition information\n");
-		mtd_device_register(info->cmtd, physmap_data->parts,
-				    physmap_data->nr_parts);
-		return 0;
-	}
-
-	mtd_device_register(info->cmtd, NULL, 0);
-
+	mtd_device_parse_register(info->cmtd, part_probe_types, 0,
+				  physmap_data->parts, physmap_data->nr_parts);
 	return 0;
 
 err_out:
@@ -245,21 +226,6 @@
 	.num_resources	= 1,
 	.resource	= &physmap_flash_resource,
 };
-
-void physmap_configure(unsigned long addr, unsigned long size,
-		int bankwidth, void (*set_vpp)(struct map_info *, int))
-{
-	physmap_flash_resource.start = addr;
-	physmap_flash_resource.end = addr + size - 1;
-	physmap_flash_data.width = bankwidth;
-	physmap_flash_data.set_vpp = set_vpp;
-}
-
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts)
-{
-	physmap_flash_data.nr_parts = num_parts;
-	physmap_flash_data.parts = parts;
-}
 #endif
 
 static int __init physmap_init(void)
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index d251d1d..7d65f9d 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -34,58 +34,10 @@
 
 struct of_flash {
 	struct mtd_info		*cmtd;
-	struct mtd_partition	*parts;
 	int list_size; /* number of elements in of_flash_list */
 	struct of_flash_list	list[0];
 };
 
-#define OF_FLASH_PARTS(info)	((info)->parts)
-static int parse_obsolete_partitions(struct platform_device *dev,
-				     struct of_flash *info,
-				     struct device_node *dp)
-{
-	int i, plen, nr_parts;
-	const struct {
-		__be32 offset, len;
-	} *part;
-	const char *names;
-
-	part = of_get_property(dp, "partitions", &plen);
-	if (!part)
-		return 0; /* No partitions found */
-
-	dev_warn(&dev->dev, "Device tree uses obsolete partition map binding\n");
-
-	nr_parts = plen / sizeof(part[0]);
-
-	info->parts = kzalloc(nr_parts * sizeof(*info->parts), GFP_KERNEL);
-	if (!info->parts)
-		return -ENOMEM;
-
-	names = of_get_property(dp, "partition-names", &plen);
-
-	for (i = 0; i < nr_parts; i++) {
-		info->parts[i].offset = be32_to_cpu(part->offset);
-		info->parts[i].size   = be32_to_cpu(part->len) & ~1;
-		if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
-			info->parts[i].mask_flags = MTD_WRITEABLE;
-
-		if (names && (plen > 0)) {
-			int len = strlen(names) + 1;
-
-			info->parts[i].name = (char *)names;
-			plen -= len;
-			names += len;
-		} else {
-			info->parts[i].name = "unnamed";
-		}
-
-		part++;
-	}
-
-	return nr_parts;
-}
-
 static int of_flash_remove(struct platform_device *dev)
 {
 	struct of_flash *info;
@@ -101,11 +53,8 @@
 		mtd_concat_destroy(info->cmtd);
 	}
 
-	if (info->cmtd) {
-		if (OF_FLASH_PARTS(info))
-			kfree(OF_FLASH_PARTS(info));
+	if (info->cmtd)
 		mtd_device_unregister(info->cmtd);
-	}
 
 	for (i = 0; i < info->list_size; i++) {
 		if (info->list[i].mtd)
@@ -165,7 +114,8 @@
    specifies the list of partition probers to use. If none is given then the
    default is use. These take precedence over other device tree
    information. */
-static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types_def[] = { "cmdlinepart", "RedBoot",
+					"ofpart", "ofoldpart", NULL };
 static const char ** __devinit of_get_probes(struct device_node *dp)
 {
 	const char *cp;
@@ -218,6 +168,7 @@
 	int reg_tuple_size;
 	struct mtd_info **mtd_list = NULL;
 	resource_size_t res_size;
+	struct mtd_part_parser_data ppdata;
 
 	match = of_match_device(of_flash_match, &dev->dev);
 	if (!match)
@@ -331,29 +282,12 @@
 	if (err)
 		goto err_out;
 
+	ppdata.of_node = dp;
 	part_probe_types = of_get_probes(dp);
-	err = parse_mtd_partitions(info->cmtd, part_probe_types,
-				   &info->parts, 0);
-	if (err < 0) {
-		of_free_probes(part_probe_types);
-		goto err_out;
-	}
+	mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+			NULL, 0);
 	of_free_probes(part_probe_types);
 
-	if (err == 0) {
-		err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
-		if (err < 0)
-			goto err_out;
-	}
-
-	if (err == 0) {
-		err = parse_obsolete_partitions(dev, info, dp);
-		if (err < 0)
-			goto err_out;
-	}
-
-	mtd_device_register(info->cmtd, info->parts, err);
-
 	kfree(mtd_list);
 
 	return 0;
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 9ca1ecc..94f5534 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -44,8 +44,6 @@
 	struct device		*dev;
 	struct mtd_info		*mtd;
 	struct map_info		 map;
-	struct mtd_partition	*partitions;
-	bool			free_partitions;
 	struct resource		*area;
 	struct platdata_mtd_ram	*pdata;
 };
@@ -95,10 +93,6 @@
 
 	if (info->mtd) {
 		mtd_device_unregister(info->mtd);
-		if (info->partitions) {
-			if (info->free_partitions)
-				kfree(info->partitions);
-		}
 		map_destroy(info->mtd);
 	}
 
@@ -228,21 +222,8 @@
 	/* check to see if there are any available partitions, or wether
 	 * to add this device whole */
 
-	if (!pdata->nr_partitions) {
-		/* try to probe using the supplied probe type */
-		if (pdata->probes) {
-			err = parse_mtd_partitions(info->mtd, pdata->probes,
-					   &info->partitions, 0);
-			info->free_partitions = 1;
-			if (err > 0)
-				err = mtd_device_register(info->mtd,
-					info->partitions, err);
-		}
-	}
-	/* use the static mapping */
-	else
-		err = mtd_device_register(info->mtd, pdata->partitions,
-					  pdata->nr_partitions);
+	err = mtd_device_parse_register(info->mtd, pdata->probes, 0,
+			pdata->partitions, pdata->nr_partitions);
 	if (!err)
 		dev_info(&pdev->dev, "registered mtd device\n");
 
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 7ae137d..411a17d 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -41,8 +41,6 @@
 }
 
 struct pxa2xx_flash_info {
-	struct mtd_partition	*parts;
-	int			nr_parts;
 	struct mtd_info		*mtd;
 	struct map_info		map;
 };
@@ -55,9 +53,7 @@
 {
 	struct flash_platform_data *flash = pdev->dev.platform_data;
 	struct pxa2xx_flash_info *info;
-	struct mtd_partition *parts;
 	struct resource *res;
-	int ret = 0;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -71,8 +67,6 @@
 	info->map.bankwidth = flash->width;
 	info->map.phys = res->start;
 	info->map.size = resource_size(res);
-	info->parts = flash->parts;
-	info->nr_parts = flash->nr_parts;
 
 	info->map.virt = ioremap(info->map.phys, info->map.size);
 	if (!info->map.virt) {
@@ -104,18 +98,7 @@
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	ret = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
-	if (ret > 0) {
-		info->nr_parts = ret;
-		info->parts = parts;
-	}
-
-	if (!info->nr_parts)
-		printk("Registering %s as whole device\n",
-		       info->map.name);
-
-	mtd_device_register(info->mtd, info->parts, info->nr_parts);
+	mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
 
 	platform_set_drvdata(pdev, info);
 	return 0;
@@ -133,7 +116,6 @@
 	iounmap(info->map.virt);
 	if (info->map.cached)
 		iounmap(info->map.cached);
-	kfree(info->parts);
 	kfree(info);
 	return 0;
 }
diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c
index 761fb45..0237f19 100644
--- a/drivers/mtd/maps/rbtx4939-flash.c
+++ b/drivers/mtd/maps/rbtx4939-flash.c
@@ -25,8 +25,6 @@
 struct rbtx4939_flash_info {
 	struct mtd_info *mtd;
 	struct map_info map;
-	int nr_parts;
-	struct mtd_partition *parts;
 };
 
 static int rbtx4939_flash_remove(struct platform_device *dev)
@@ -41,8 +39,6 @@
 	if (info->mtd) {
 		struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
 
-		if (info->nr_parts)
-			kfree(info->parts);
 		mtd_device_unregister(info->mtd);
 		map_destroy(info->mtd);
 	}
@@ -50,7 +46,6 @@
 }
 
 static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
-static const char *part_probe_types[] = { "cmdlinepart", NULL };
 
 static int rbtx4939_flash_probe(struct platform_device *dev)
 {
@@ -107,22 +102,11 @@
 	info->mtd->owner = THIS_MODULE;
 	if (err)
 		goto err_out;
+	err = mtd_device_parse_register(info->mtd, NULL, 0,
+			pdata->parts, pdata->nr_parts);
 
-	err = parse_mtd_partitions(info->mtd, part_probe_types,
-				&info->parts, 0);
-	if (err > 0) {
-		mtd_device_register(info->mtd, info->parts, err);
-		info->nr_parts = err;
-		return 0;
-	}
-
-	if (pdata->nr_parts) {
-		pr_notice("Using rbtx4939 partition information\n");
-		mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
-		return 0;
-	}
-
-	mtd_device_register(info->mtd, NULL, 0);
+	if (err)
+		goto err_out;
 	return 0;
 
 err_out:
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index a9b5e0e..fa9c0a9 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -131,10 +131,8 @@
 };
 
 struct sa_info {
-	struct mtd_partition	*parts;
 	struct mtd_info		*mtd;
 	int			num_subdev;
-	unsigned int		nr_parts;
 	struct sa_subdev_info	subdev[0];
 };
 
@@ -231,8 +229,6 @@
 			mtd_concat_destroy(info->mtd);
 	}
 
-	kfree(info->parts);
-
 	for (i = info->num_subdev - 1; i >= 0; i--)
 		sa1100_destroy_subdev(&info->subdev[i]);
 	kfree(info);
@@ -341,10 +337,8 @@
 static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
 {
 	struct flash_platform_data *plat = pdev->dev.platform_data;
-	struct mtd_partition *parts;
-	const char *part_type = NULL;
 	struct sa_info *info;
-	int err, nr_parts = 0;
+	int err;
 
 	if (!plat)
 		return -ENODEV;
@@ -358,26 +352,8 @@
 	/*
 	 * Partition selection stuff.
 	 */
-	nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0);
-	if (nr_parts > 0) {
-		info->parts = parts;
-		part_type = "dynamic";
-	} else {
-		parts = plat->parts;
-		nr_parts = plat->nr_parts;
-		part_type = "static";
-	}
-
-	if (nr_parts == 0)
-		printk(KERN_NOTICE "SA1100 flash: no partition info "
-			"available, registering whole flash\n");
-	else
-		printk(KERN_NOTICE "SA1100 flash: using %s partition "
-			"definition\n", part_type);
-
-	mtd_device_register(info->mtd, parts, nr_parts);
-
-	info->nr_parts = nr_parts;
+	mtd_device_parse_register(info->mtd, part_probes, 0,
+			plat->parts, plat->nr_parts);
 
 	platform_set_drvdata(pdev, info);
 	err = 0;
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index cbf6bad..496c407 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -19,8 +19,6 @@
 static struct mtd_info *flash_mtd;
 static struct mtd_info *eprom_mtd;
 
-static struct mtd_partition *parsed_parts;
-
 struct map_info soleng_eprom_map = {
 	.name = "Solution Engine EPROM",
 	.size = 0x400000,
@@ -51,12 +49,14 @@
 		.size = MTDPART_SIZ_FULL,
 	}
 };
+#define NUM_PARTITIONS ARRAY_SIZE(superh_se_partitions)
+#else
+#define superh_se_partitions NULL
+#define NUM_PARTITIONS 0
 #endif /* CONFIG_MTD_SUPERH_RESERVE */
 
 static int __init init_soleng_maps(void)
 {
-	int nr_parts = 0;
-
 	/* First probe at offset 0 */
 	soleng_flash_map.phys = 0;
 	soleng_flash_map.virt = (void __iomem *)P2SEGADDR(0);
@@ -92,21 +92,8 @@
 		mtd_device_register(eprom_mtd, NULL, 0);
 	}
 
-	nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
-
-#ifdef CONFIG_MTD_SUPERH_RESERVE
-	if (nr_parts <= 0) {
-		printk(KERN_NOTICE "Using configured partition at 0x%08x.\n",
-		       CONFIG_MTD_SUPERH_RESERVE);
-		parsed_parts = superh_se_partitions;
-		nr_parts = sizeof(superh_se_partitions)/sizeof(*parsed_parts);
-	}
-#endif /* CONFIG_MTD_SUPERH_RESERVE */
-
-	if (nr_parts > 0)
-		mtd_device_register(flash_mtd, parsed_parts, nr_parts);
-	else
-		mtd_device_register(flash_mtd, NULL, 0);
+	mtd_device_parse_register(flash_mtd, probes, 0,
+			superh_se_partitions, NUM_PARTITIONS);
 
 	return 0;
 }
@@ -118,10 +105,7 @@
 		map_destroy(eprom_mtd);
 	}
 
-	if (parsed_parts)
-		mtd_device_unregister(flash_mtd);
-	else
-		mtd_device_unregister(flash_mtd);
+	mtd_device_unregister(flash_mtd);
 	map_destroy(flash_mtd);
 }
 
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index 901ce96..aa7e0cb 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -20,7 +20,6 @@
 #include <asm/immap_cpm2.h>
 
 static struct mtd_info *sbcmtd[3];
-static struct mtd_partition *sbcmtd_parts[3];
 
 struct map_info sbc82xx_flash_map[3] = {
 	{.name = "Boot flash"},
@@ -101,6 +100,7 @@
 	for (i=0; i<3; i++) {
 		int8_t flashcs[3] = { 0, 6, 1 };
 		int nr_parts;
+		struct mtd_partition *defparts;
 
 		printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d",
 		       sbc82xx_flash_map[i].name,
@@ -113,7 +113,8 @@
 		}
 		printk(" at %08lx)\n",  sbc82xx_flash_map[i].phys);
 
-		sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, sbc82xx_flash_map[i].size);
+		sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys,
+						    sbc82xx_flash_map[i].size);
 
 		if (!sbc82xx_flash_map[i].virt) {
 			printk("Failed to ioremap\n");
@@ -129,24 +130,20 @@
 
 		sbcmtd[i]->owner = THIS_MODULE;
 
-		nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes,
-						&sbcmtd_parts[i], 0);
-		if (nr_parts > 0) {
-			mtd_device_register(sbcmtd[i], sbcmtd_parts[i],
-					    nr_parts);
-			continue;
-		}
-
 		/* No partitioning detected. Use default */
 		if (i == 2) {
-			mtd_device_register(sbcmtd[i], NULL, 0);
+			defparts = NULL;
+			nr_parts = 0;
 		} else if (i == bigflash) {
-			mtd_device_register(sbcmtd[i], bigflash_parts,
-					    ARRAY_SIZE(bigflash_parts));
+			defparts = bigflash_parts;
+			nr_parts = ARRAY_SIZE(bigflash_parts);
 		} else {
-			mtd_device_register(sbcmtd[i], smallflash_parts,
-					    ARRAY_SIZE(smallflash_parts));
+			defparts = smallflash_parts;
+			nr_parts = ARRAY_SIZE(smallflash_parts);
 		}
+
+		mtd_device_parse_register(sbcmtd[i], part_probes, 0,
+					  defparts, nr_parts);
 	}
 	return 0;
 }
@@ -159,12 +156,8 @@
 		if (!sbcmtd[i])
 			continue;
 
-		if (i<2 || sbcmtd_parts[i])
-			mtd_device_unregister(sbcmtd[i]);
-		else
-			mtd_device_unregister(sbcmtd[i]);
+		mtd_device_unregister(sbcmtd[i]);
 
-		kfree(sbcmtd_parts[i]);
 		map_destroy(sbcmtd[i]);
 
 		iounmap((void *)sbc82xx_flash_map[i].virt);
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index ca38569..ed8b5e7 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -426,6 +426,8 @@
 	new->rq->queuedata = new;
 	blk_queue_logical_block_size(new->rq, tr->blksize);
 
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, new->rq);
+
 	if (tr->discard) {
 		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, new->rq);
 		new->rq->limits.max_discard_sectors = UINT_MAX;
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 3326615..7c1dc90 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -44,7 +44,7 @@
 	enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
 };
 
-static struct mutex mtdblks_lock;
+static DEFINE_MUTEX(mtdblks_lock);
 
 /*
  * Cache stuff...
@@ -119,7 +119,7 @@
 	if (mtdblk->cache_state != STATE_DIRTY)
 		return 0;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" "
+	pr_debug("mtdblock: writing cached data for \"%s\" "
 			"at 0x%lx, size 0x%x\n", mtd->name,
 			mtdblk->cache_offset, mtdblk->cache_size);
 
@@ -148,7 +148,7 @@
 	size_t retlen;
 	int ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
+	pr_debug("mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n",
 		mtd->name, pos, len);
 
 	if (!sect_size)
@@ -218,7 +218,7 @@
 	size_t retlen;
 	int ret;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
+	pr_debug("mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n",
 			mtd->name, pos, len);
 
 	if (!sect_size)
@@ -283,7 +283,7 @@
 {
 	struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
 
-	DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+	pr_debug("mtdblock_open\n");
 
 	mutex_lock(&mtdblks_lock);
 	if (mtdblk->count) {
@@ -303,7 +303,7 @@
 
 	mutex_unlock(&mtdblks_lock);
 
-	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+	pr_debug("ok\n");
 
 	return 0;
 }
@@ -312,7 +312,7 @@
 {
 	struct mtdblk_dev *mtdblk = container_of(mbd, struct mtdblk_dev, mbd);
 
-   	DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+	pr_debug("mtdblock_release\n");
 
 	mutex_lock(&mtdblks_lock);
 
@@ -329,7 +329,7 @@
 
 	mutex_unlock(&mtdblks_lock);
 
-	DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
+	pr_debug("ok\n");
 
 	return 0;
 }
@@ -389,8 +389,6 @@
 
 static int __init init_mtdblock(void)
 {
-	mutex_init(&mtdblks_lock);
-
 	return register_mtd_blktrans(&mtdblock_tr);
 }
 
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index 795a8c0..0470a6e 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/blktrans.h>
+#include <linux/module.h>
 
 static int mtdblock_readsect(struct mtd_blktrans_dev *dev,
 			      unsigned long block, char *buf)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 61086ea..e7dc732 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -43,7 +43,7 @@
 
 /*
  * Data structure to hold the pointer to the mtd device as well
- * as mode information ofr various use cases.
+ * as mode information of various use cases.
  */
 struct mtd_file_info {
 	struct mtd_info *mtd;
@@ -86,7 +86,7 @@
 	struct mtd_file_info *mfi;
 	struct inode *mtd_ino;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_open\n");
+	pr_debug("MTD_open\n");
 
 	/* You can't open the RO devices RW */
 	if ((file->f_mode & FMODE_WRITE) && (minor & 1))
@@ -151,7 +151,7 @@
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n");
+	pr_debug("MTD_close\n");
 
 	/* Only sync if opened RW */
 	if ((file->f_mode & FMODE_WRITE) && mtd->sync)
@@ -195,7 +195,7 @@
 	size_t size = count;
 	char *kbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+	pr_debug("MTD_read\n");
 
 	if (*ppos + count > mtd->size)
 		count = mtd->size - *ppos;
@@ -211,17 +211,17 @@
 		len = min_t(size_t, count, size);
 
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_FACTORY:
 			ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf);
 			break;
-		case MTD_MODE_OTP_USER:
+		case MTD_FILE_MODE_OTP_USER:
 			ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
 			break;
-		case MTD_MODE_RAW:
+		case MTD_FILE_MODE_RAW:
 		{
 			struct mtd_oob_ops ops;
 
-			ops.mode = MTD_OOB_RAW;
+			ops.mode = MTD_OPS_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
 			ops.len = len;
@@ -233,16 +233,16 @@
 		default:
 			ret = mtd->read(mtd, *ppos, len, &retlen, kbuf);
 		}
-		/* Nand returns -EBADMSG on ecc errors, but it returns
+		/* Nand returns -EBADMSG on ECC errors, but it returns
 		 * the data. For our userspace tools it is important
-		 * to dump areas with ecc errors !
+		 * to dump areas with ECC errors!
 		 * For kernel internal usage it also might return -EUCLEAN
 		 * to signal the caller that a bitflip has occurred and has
 		 * been corrected by the ECC algorithm.
 		 * Userspace software which accesses NAND this way
 		 * must be aware of the fact that it deals with NAND
 		 */
-		if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) {
+		if (!ret || mtd_is_bitflip_or_eccerr(ret)) {
 			*ppos += retlen;
 			if (copy_to_user(buf, kbuf, retlen)) {
 				kfree(kbuf);
@@ -278,7 +278,7 @@
 	int ret=0;
 	int len;
 
-	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+	pr_debug("MTD_write\n");
 
 	if (*ppos == mtd->size)
 		return -ENOSPC;
@@ -302,10 +302,10 @@
 		}
 
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_FACTORY:
 			ret = -EROFS;
 			break;
-		case MTD_MODE_OTP_USER:
+		case MTD_FILE_MODE_OTP_USER:
 			if (!mtd->write_user_prot_reg) {
 				ret = -EOPNOTSUPP;
 				break;
@@ -313,13 +313,14 @@
 			ret = mtd->write_user_prot_reg(mtd, *ppos, len, &retlen, kbuf);
 			break;
 
-		case MTD_MODE_RAW:
+		case MTD_FILE_MODE_RAW:
 		{
 			struct mtd_oob_ops ops;
 
-			ops.mode = MTD_OOB_RAW;
+			ops.mode = MTD_OPS_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
+			ops.ooboffs = 0;
 			ops.len = len;
 
 			ret = mtd->write_oob(mtd, *ppos, &ops);
@@ -367,13 +368,13 @@
 		if (!mtd->read_fact_prot_reg)
 			ret = -EOPNOTSUPP;
 		else
-			mfi->mode = MTD_MODE_OTP_FACTORY;
+			mfi->mode = MTD_FILE_MODE_OTP_FACTORY;
 		break;
 	case MTD_OTP_USER:
 		if (!mtd->read_fact_prot_reg)
 			ret = -EOPNOTSUPP;
 		else
-			mfi->mode = MTD_MODE_OTP_USER;
+			mfi->mode = MTD_FILE_MODE_OTP_USER;
 		break;
 	default:
 		ret = -EINVAL;
@@ -390,6 +391,7 @@
 	uint64_t start, uint32_t length, void __user *ptr,
 	uint32_t __user *retp)
 {
+	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_oob_ops ops;
 	uint32_t retlen;
 	int ret = 0;
@@ -409,9 +411,10 @@
 		return ret;
 
 	ops.ooblen = length;
-	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.ooboffs = start & (mtd->writesize - 1);
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+		MTD_OPS_PLACE_OOB;
 
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
@@ -420,7 +423,7 @@
 	if (IS_ERR(ops.oobbuf))
 		return PTR_ERR(ops.oobbuf);
 
-	start &= ~((uint64_t)mtd->oobsize - 1);
+	start &= ~((uint64_t)mtd->writesize - 1);
 	ret = mtd->write_oob(mtd, start, &ops);
 
 	if (ops.oobretlen > 0xFFFFFFFFU)
@@ -433,9 +436,11 @@
 	return ret;
 }
 
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
-	uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtd_do_readoob(struct file *file, struct mtd_info *mtd,
+	uint64_t start, uint32_t length, void __user *ptr,
+	uint32_t __user *retp)
 {
+	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_oob_ops ops;
 	int ret = 0;
 
@@ -451,9 +456,10 @@
 		return ret;
 
 	ops.ooblen = length;
-	ops.ooboffs = start & (mtd->oobsize - 1);
+	ops.ooboffs = start & (mtd->writesize - 1);
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = (mfi->mode == MTD_FILE_MODE_RAW) ? MTD_OPS_RAW :
+		MTD_OPS_PLACE_OOB;
 
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
@@ -462,7 +468,7 @@
 	if (!ops.oobbuf)
 		return -ENOMEM;
 
-	start &= ~((uint64_t)mtd->oobsize - 1);
+	start &= ~((uint64_t)mtd->writesize - 1);
 	ret = mtd->read_oob(mtd, start, &ops);
 
 	if (put_user(ops.oobretlen, retp))
@@ -472,13 +478,29 @@
 		ret = -EFAULT;
 
 	kfree(ops.oobbuf);
+
+	/*
+	 * NAND returns -EBADMSG on ECC errors, but it returns the OOB
+	 * data. For our userspace tools it is important to dump areas
+	 * with ECC errors!
+	 * For kernel internal usage it also might return -EUCLEAN
+	 * to signal the caller that a bitflip has occured and has
+	 * been corrected by the ECC algorithm.
+	 *
+	 * Note: currently the standard NAND function, nand_read_oob_std,
+	 * does not calculate ECC for the OOB area, so do not rely on
+	 * this behavior unless you have replaced it with your own.
+	 */
+	if (mtd_is_bitflip_or_eccerr(ret))
+		return 0;
+
 	return ret;
 }
 
 /*
  * Copies (and truncates, if necessary) data from the larger struct,
  * nand_ecclayout, to the smaller, deprecated layout struct,
- * nand_ecclayout_user. This is necessary only to suppport the deprecated
+ * nand_ecclayout_user. This is necessary only to support the deprecated
  * API ioctl ECCGETLAYOUT while allowing all new functionality to use
  * nand_ecclayout flexibly (i.e. the struct may change size in new
  * releases without requiring major rewrites).
@@ -544,6 +566,55 @@
 	}
 }
 
+static int mtd_write_ioctl(struct mtd_info *mtd,
+		struct mtd_write_req __user *argp)
+{
+	struct mtd_write_req req;
+	struct mtd_oob_ops ops;
+	void __user *usr_data, *usr_oob;
+	int ret;
+
+	if (copy_from_user(&req, argp, sizeof(req)) ||
+			!access_ok(VERIFY_READ, req.usr_data, req.len) ||
+			!access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
+		return -EFAULT;
+	if (!mtd->write_oob)
+		return -EOPNOTSUPP;
+
+	ops.mode = req.mode;
+	ops.len = (size_t)req.len;
+	ops.ooblen = (size_t)req.ooblen;
+	ops.ooboffs = 0;
+
+	usr_data = (void __user *)(uintptr_t)req.usr_data;
+	usr_oob = (void __user *)(uintptr_t)req.usr_oob;
+
+	if (req.usr_data) {
+		ops.datbuf = memdup_user(usr_data, ops.len);
+		if (IS_ERR(ops.datbuf))
+			return PTR_ERR(ops.datbuf);
+	} else {
+		ops.datbuf = NULL;
+	}
+
+	if (req.usr_oob) {
+		ops.oobbuf = memdup_user(usr_oob, ops.ooblen);
+		if (IS_ERR(ops.oobbuf)) {
+			kfree(ops.datbuf);
+			return PTR_ERR(ops.oobbuf);
+		}
+	} else {
+		ops.oobbuf = NULL;
+	}
+
+	ret = mtd->write_oob(mtd, (loff_t)req.start, &ops);
+
+	kfree(ops.datbuf);
+	kfree(ops.oobbuf);
+
+	return ret;
+}
+
 static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	struct mtd_file_info *mfi = file->private_data;
@@ -553,7 +624,7 @@
 	u_long size;
 	struct mtd_info_user info;
 
-	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+	pr_debug("MTD_ioctl\n");
 
 	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
 	if (cmd & IOC_IN) {
@@ -601,8 +672,8 @@
 		info.erasesize	= mtd->erasesize;
 		info.writesize	= mtd->writesize;
 		info.oobsize	= mtd->oobsize;
-		/* The below fields are obsolete */
-		info.ecctype	= -1;
+		/* The below field is obsolete */
+		info.padding	= 0;
 		if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
 			return -EFAULT;
 		break;
@@ -698,7 +769,7 @@
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+			ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
 				buf.ptr, &buf_user->start);
 		break;
 	}
@@ -725,12 +796,19 @@
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start, buf.length,
+			ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
 				(void __user *)(uintptr_t)buf.usr_ptr,
 				&buf_user->length);
 		break;
 	}
 
+	case MEMWRITE:
+	{
+		ret = mtd_write_ioctl(mtd,
+		      (struct mtd_write_req __user *)arg);
+		break;
+	}
+
 	case MEMLOCK:
 	{
 		struct erase_info_user einfo;
@@ -827,7 +905,7 @@
 		if (copy_from_user(&mode, argp, sizeof(int)))
 			return -EFAULT;
 
-		mfi->mode = MTD_MODE_NORMAL;
+		mfi->mode = MTD_FILE_MODE_NORMAL;
 
 		ret = otp_select_filemode(mfi, mode);
 
@@ -843,11 +921,11 @@
 			return -ENOMEM;
 		ret = -EOPNOTSUPP;
 		switch (mfi->mode) {
-		case MTD_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_FACTORY:
 			if (mtd->get_fact_prot_info)
 				ret = mtd->get_fact_prot_info(mtd, buf, 4096);
 			break;
-		case MTD_MODE_OTP_USER:
+		case MTD_FILE_MODE_OTP_USER:
 			if (mtd->get_user_prot_info)
 				ret = mtd->get_user_prot_info(mtd, buf, 4096);
 			break;
@@ -871,7 +949,7 @@
 	{
 		struct otp_info oinfo;
 
-		if (mfi->mode != MTD_MODE_OTP_USER)
+		if (mfi->mode != MTD_FILE_MODE_OTP_USER)
 			return -EINVAL;
 		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
@@ -882,7 +960,7 @@
 	}
 #endif
 
-	/* This ioctl is being deprecated - it truncates the ecc layout */
+	/* This ioctl is being deprecated - it truncates the ECC layout */
 	case ECCGETLAYOUT:
 	{
 		struct nand_ecclayout_user *usrlay;
@@ -915,17 +993,17 @@
 		mfi->mode = 0;
 
 		switch(arg) {
-		case MTD_MODE_OTP_FACTORY:
-		case MTD_MODE_OTP_USER:
+		case MTD_FILE_MODE_OTP_FACTORY:
+		case MTD_FILE_MODE_OTP_USER:
 			ret = otp_select_filemode(mfi, arg);
 			break;
 
-		case MTD_MODE_RAW:
+		case MTD_FILE_MODE_RAW:
 			if (!mtd->read_oob || !mtd->write_oob)
 				return -EOPNOTSUPP;
 			mfi->mode = arg;
 
-		case MTD_MODE_NORMAL:
+		case MTD_FILE_MODE_NORMAL:
 			break;
 		default:
 			ret = -EINVAL;
@@ -1011,7 +1089,7 @@
 		if (copy_from_user(&buf, argp, sizeof(buf)))
 			ret = -EFAULT;
 		else
-			ret = mtd_do_readoob(mtd, buf.start,
+			ret = mtd_do_readoob(file, mtd, buf.start,
 				buf.length, compat_ptr(buf.ptr),
 				&buf_user->start);
 		break;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index e601672..6df4d4d 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -95,10 +95,10 @@
 
 		/* Save information about bitflips! */
 		if (unlikely(err)) {
-			if (err == -EBADMSG) {
+			if (mtd_is_eccerr(err)) {
 				mtd->ecc_stats.failed++;
 				ret = err;
-			} else if (err == -EUCLEAN) {
+			} else if (mtd_is_bitflip(err)) {
 				mtd->ecc_stats.corrected++;
 				/* Do not overwrite -EBADMSG !! */
 				if (!ret)
@@ -279,10 +279,10 @@
 
 		/* Save information about bitflips! */
 		if (unlikely(err)) {
-			if (err == -EBADMSG) {
+			if (mtd_is_eccerr(err)) {
 				mtd->ecc_stats.failed++;
 				ret = err;
-			} else if (err == -EUCLEAN) {
+			} else if (mtd_is_bitflip(err)) {
 				mtd->ecc_stats.corrected++;
 				/* Do not overwrite -EBADMSG !! */
 				if (!ret)
@@ -770,7 +770,7 @@
 
 	/*
 	 * Set up the new "super" device's MTD object structure, check for
-	 * incompatibilites between the subdevices.
+	 * incompatibilities between the subdevices.
 	 */
 	concat->mtd.type = subdev[0]->type;
 	concat->mtd.flags = subdev[0]->flags;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index c510aff..b01993e 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -362,7 +362,7 @@
 			      MTD_DEVT(i) + 1,
 			      NULL, "mtd%dro", i);
 
-	DEBUG(0, "mtd: Giving out device %d to %s\n", i, mtd->name);
+	pr_debug("mtd: Giving out device %d to %s\n", i, mtd->name);
 	/* No need to get a refcount on the module containing
 	   the notifier, since we hold the mtd_table_mutex */
 	list_for_each_entry(not, &mtd_notifiers, list)
@@ -429,27 +429,63 @@
 }
 
 /**
- * mtd_device_register - register an MTD device.
+ * mtd_device_parse_register - parse partitions and register an MTD device.
  *
- * @master: the MTD device to register
- * @parts: the partitions to register - only valid if nr_parts > 0
- * @nr_parts: the number of partitions in parts.  If zero then the full MTD
- *            device is registered
+ * @mtd: the MTD device to register
+ * @types: the list of MTD partition probes to try, see
+ *         'parse_mtd_partitions()' for more information
+ * @parser_data: MTD partition parser-specific data
+ * @parts: fallback partition information to register, if parsing fails;
+ *         only valid if %nr_parts > %0
+ * @nr_parts: the number of partitions in parts, if zero then the full
+ *            MTD device is registered if no partition info is found
  *
- * Register an MTD device with the system and optionally, a number of
- * partitions.  If nr_parts is 0 then the whole device is registered, otherwise
- * only the partitions are registered.  To register both the full device *and*
- * the partitions, call mtd_device_register() twice, once with nr_parts == 0
- * and once equal to the number of partitions.
+ * This function aggregates MTD partitions parsing (done by
+ * 'parse_mtd_partitions()') and MTD device and partitions registering. It
+ * basically follows the most common pattern found in many MTD drivers:
+ *
+ * * It first tries to probe partitions on MTD device @mtd using parsers
+ *   specified in @types (if @types is %NULL, then the default list of parsers
+ *   is used, see 'parse_mtd_partitions()' for more information). If none are
+ *   found this functions tries to fallback to information specified in
+ *   @parts/@nr_parts.
+ * * If any partitioning info was found, this function registers the found
+ *   partitions.
+ * * If no partitions were found this function just registers the MTD device
+ *   @mtd and exits.
+ *
+ * Returns zero in case of success and a negative error code in case of failure.
  */
-int mtd_device_register(struct mtd_info *master,
-			const struct mtd_partition *parts,
-			int nr_parts)
+int mtd_device_parse_register(struct mtd_info *mtd, const char **types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *parts,
+			      int nr_parts)
 {
-	return parts ? add_mtd_partitions(master, parts, nr_parts) :
-		add_mtd_device(master);
+	int err;
+	struct mtd_partition *real_parts;
+
+	err = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+	if (err <= 0 && nr_parts && parts) {
+		real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+				     GFP_KERNEL);
+		if (!real_parts)
+			err = -ENOMEM;
+		else
+			err = nr_parts;
+	}
+
+	if (err > 0) {
+		err = add_mtd_partitions(mtd, real_parts, err);
+		kfree(real_parts);
+	} else if (err == 0) {
+		err = add_mtd_device(mtd);
+		if (err == 1)
+			err = -ENODEV;
+	}
+
+	return err;
 }
-EXPORT_SYMBOL_GPL(mtd_device_register);
+EXPORT_SYMBOL_GPL(mtd_device_parse_register);
 
 /**
  * mtd_device_unregister - unregister an existing MTD device.
diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h
index 0ed6126..961a384 100644
--- a/drivers/mtd/mtdcore.h
+++ b/drivers/mtd/mtdcore.h
@@ -15,6 +15,9 @@
 extern int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *,
 			      int);
 extern int del_mtd_partitions(struct mtd_info *);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
+				struct mtd_partition **pparts,
+				struct mtd_part_parser_data *data);
 
 #define mtd_for_each_device(mtd)			\
 	for ((mtd) = __mtd_next_device(0);		\
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index e3e40f4..1e2fa62 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -258,7 +258,7 @@
 		ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
 				&retlen, (u_char *) &count[0]);
 		if (retlen != MTDOOPS_HEADER_SIZE ||
-				(ret < 0 && ret != -EUCLEAN)) {
+				(ret < 0 && !mtd_is_bitflip(ret))) {
 			printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
 			       page * record_size, retlen,
 			       MTDOOPS_HEADER_SIZE, ret);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 630be3e..a0bd2de 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -73,9 +73,9 @@
 	res = part->master->read(part->master, from + part->offset,
 				   len, retlen, buf);
 	if (unlikely(res)) {
-		if (res == -EUCLEAN)
+		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
-		if (res == -EBADMSG)
+		if (mtd_is_eccerr(res))
 			mtd->ecc_stats.failed += part->master->ecc_stats.failed - stats.failed;
 	}
 	return res;
@@ -130,7 +130,7 @@
 	if (ops->oobbuf) {
 		size_t len, pages;
 
-		if (ops->mode == MTD_OOB_AUTO)
+		if (ops->mode == MTD_OPS_AUTO_OOB)
 			len = mtd->oobavail;
 		else
 			len = mtd->oobsize;
@@ -142,9 +142,9 @@
 
 	res = part->master->read_oob(part->master, from + part->offset, ops);
 	if (unlikely(res)) {
-		if (res == -EUCLEAN)
+		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected++;
-		if (res == -EBADMSG)
+		if (mtd_is_eccerr(res))
 			mtd->ecc_stats.failed++;
 	}
 	return res;
@@ -479,6 +479,19 @@
 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
 		}
 	}
+	if (slave->offset == MTDPART_OFS_RETAIN) {
+		slave->offset = cur_offset;
+		if (master->size - slave->offset >= slave->mtd.size) {
+			slave->mtd.size = master->size - slave->offset
+							- slave->mtd.size;
+		} else {
+			printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
+				part->name, master->size - slave->offset,
+				slave->mtd.size);
+			/* register to preserve ordering */
+			goto out_register;
+		}
+	}
 	if (slave->mtd.size == MTDPART_SIZ_FULL)
 		slave->mtd.size = master->size - slave->offset;
 
@@ -693,6 +706,8 @@
 	return ret;
 }
 
+#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
+
 int register_mtd_parser(struct mtd_part_parser *p)
 {
 	spin_lock(&part_parser_lock);
@@ -712,19 +727,51 @@
 }
 EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
+/*
+ * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
+ * are changing this array!
+ */
+static const char *default_mtd_part_types[] = {
+	"cmdlinepart",
+	"ofpart",
+	NULL
+};
+
+/**
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+ * @pparts: array of partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+ * partition parsers, specified in @types. However, if @types is %NULL, then
+ * the default list of parsers is used. The default list contains only the
+ * "cmdlinepart" and "ofpart" parsers ATM.
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+ * o zero if no partitions were found
+ * o a positive number of found partitions, in which case on exit @pparts will
+ *   point to an array containing this number of &struct mtd_info objects.
+ */
 int parse_mtd_partitions(struct mtd_info *master, const char **types,
-			 struct mtd_partition **pparts, unsigned long origin)
+			 struct mtd_partition **pparts,
+			 struct mtd_part_parser_data *data)
 {
 	struct mtd_part_parser *parser;
 	int ret = 0;
 
+	if (!types)
+		types = default_mtd_part_types;
+
 	for ( ; ret <= 0 && *types; types++) {
 		parser = get_partition_parser(*types);
 		if (!parser && !request_module("%s", *types))
 				parser = get_partition_parser(*types);
 		if (!parser)
 			continue;
-		ret = (*parser->parse_fn)(master, pparts, origin);
+		ret = (*parser->parse_fn)(master, pparts, data);
 		if (ret > 0) {
 			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
 			       ret, parser->name, master->name);
@@ -733,7 +780,6 @@
 	}
 	return ret;
 }
-EXPORT_SYMBOL_GPL(parse_mtd_partitions);
 
 int mtd_is_partition(struct mtd_info *mtd)
 {
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 16b02a1..a90bfe7 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -14,6 +14,7 @@
 
 #include <linux/mtd/super.h>
 #include <linux/namei.h>
+#include <linux/export.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
 
@@ -26,12 +27,12 @@
 	struct mtd_info *mtd = _mtd;
 
 	if (sb->s_mtd == mtd) {
-		DEBUG(2, "MTDSB: Match on device %d (\"%s\")\n",
+		pr_debug("MTDSB: Match on device %d (\"%s\")\n",
 		      mtd->index, mtd->name);
 		return 1;
 	}
 
-	DEBUG(2, "MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
+	pr_debug("MTDSB: No match, device %d (\"%s\"), device %d (\"%s\")\n",
 	      sb->s_mtd->index, sb->s_mtd->name, mtd->index, mtd->name);
 	return 0;
 }
@@ -70,7 +71,7 @@
 		goto already_mounted;
 
 	/* fresh new superblock */
-	DEBUG(1, "MTDSB: New superblock for device %d (\"%s\")\n",
+	pr_debug("MTDSB: New superblock for device %d (\"%s\")\n",
 	      mtd->index, mtd->name);
 
 	sb->s_flags = flags;
@@ -87,7 +88,7 @@
 
 	/* new mountpoint for an already mounted superblock */
 already_mounted:
-	DEBUG(1, "MTDSB: Device %d (\"%s\") is already mounted\n",
+	pr_debug("MTDSB: Device %d (\"%s\") is already mounted\n",
 	      mtd->index, mtd->name);
 	put_mtd_device(mtd);
 	return dget(sb->s_root);
@@ -108,7 +109,7 @@
 
 	mtd = get_mtd_device(NULL, mtdnr);
 	if (IS_ERR(mtd)) {
-		DEBUG(0, "MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
+		pr_debug("MTDSB: Device #%u doesn't appear to exist\n", mtdnr);
 		return ERR_CAST(mtd);
 	}
 
@@ -131,7 +132,7 @@
 	if (!dev_name)
 		return ERR_PTR(-EINVAL);
 
-	DEBUG(2, "MTDSB: dev_name \"%s\"\n", dev_name);
+	pr_debug("MTDSB: dev_name \"%s\"\n", dev_name);
 
 	/* the preferred way of mounting in future; especially when
 	 * CONFIG_BLOCK=n - we specify the underlying MTD device by number or
@@ -142,7 +143,7 @@
 			struct mtd_info *mtd;
 
 			/* mount by MTD device name */
-			DEBUG(1, "MTDSB: mtd:%%s, name \"%s\"\n",
+			pr_debug("MTDSB: mtd:%%s, name \"%s\"\n",
 			      dev_name + 4);
 
 			mtd = get_mtd_device_nm(dev_name + 4);
@@ -163,7 +164,7 @@
 			mtdnr = simple_strtoul(dev_name + 3, &endptr, 0);
 			if (!*endptr) {
 				/* It was a valid number */
-				DEBUG(1, "MTDSB: mtd%%d, mtdnr %d\n",
+				pr_debug("MTDSB: mtd%%d, mtdnr %d\n",
 				      mtdnr);
 				return mount_mtd_nr(fs_type, flags,
 						     dev_name, data,
@@ -179,10 +180,10 @@
 	bdev = lookup_bdev(dev_name);
 	if (IS_ERR(bdev)) {
 		ret = PTR_ERR(bdev);
-		DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
+		pr_debug("MTDSB: lookup_bdev() returned %d\n", ret);
 		return ERR_PTR(ret);
 	}
-	DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
+	pr_debug("MTDSB: lookup_bdev() returned 0\n");
 
 	ret = -EINVAL;
 
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index fd78853..bd9590c 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -86,7 +86,7 @@
 	unsigned int flags;
 	unsigned int active_count;
 	unsigned int erase_count;
-	unsigned int pad;		/* speeds up pointer decremtnt */
+	unsigned int pad;		/* speeds up pointer decrement */
 };
 
 #define MTDSWAP_ECNT_MIN(rbroot) (rb_entry(rb_first(rbroot), struct swap_eb, \
@@ -314,7 +314,7 @@
 {
 	int ret = d->mtd->read_oob(d->mtd, from, ops);
 
-	if (ret == -EUCLEAN)
+	if (mtd_is_bitflip(ret))
 		return ret;
 
 	if (ret) {
@@ -350,11 +350,11 @@
 	ops.oobbuf = d->oob_buf;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 
 	ret = mtdswap_read_oob(d, offset, &ops);
 
-	if (ret && ret != -EUCLEAN)
+	if (ret && !mtd_is_bitflip(ret))
 		return ret;
 
 	data = (struct mtdswap_oobdata *)d->oob_buf;
@@ -363,7 +363,7 @@
 
 	if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
 		eb->erase_count = le32_to_cpu(data->count);
-		if (ret == -EUCLEAN)
+		if (mtd_is_bitflip(ret))
 			ret = MTDSWAP_SCANNED_BITFLIP;
 		else {
 			if (le16_to_cpu(data2->magic) == MTDSWAP_MAGIC_DIRTY)
@@ -389,7 +389,7 @@
 
 	ops.ooboffs = 0;
 	ops.oobbuf = (uint8_t *)&n;
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 	ops.datbuf = NULL;
 
 	if (marker == MTDSWAP_TYPE_CLEAN) {
@@ -408,7 +408,7 @@
 	if (ret) {
 		dev_warn(d->dev, "Write OOB failed for block at %08llx "
 			"error %d\n", offset, ret);
-		if (ret == -EIO || ret == -EBADMSG)
+		if (ret == -EIO || mtd_is_eccerr(ret))
 			mtdswap_handle_write_error(d, eb);
 		return ret;
 	}
@@ -628,7 +628,7 @@
 			TREE_COUNT(d, CLEAN)--;
 
 			ret = mtdswap_write_marker(d, eb, MTDSWAP_TYPE_DIRTY);
-		} while (ret == -EIO || ret == -EBADMSG);
+		} while (ret == -EIO || mtd_is_eccerr(ret));
 
 		if (ret)
 			return ret;
@@ -678,7 +678,7 @@
 	ret = mtdswap_map_free_block(d, page, bp);
 	eb = d->eb_data + (*bp / d->pages_per_eblk);
 
-	if (ret == -EIO || ret == -EBADMSG) {
+	if (ret == -EIO || mtd_is_eccerr(ret)) {
 		d->curr_write = NULL;
 		eb->active_count--;
 		d->revmap[*bp] = PAGE_UNDEF;
@@ -690,7 +690,7 @@
 
 	writepos = (loff_t)*bp << PAGE_SHIFT;
 	ret =  mtd->write(mtd, writepos, PAGE_SIZE, &retlen, buf);
-	if (ret == -EIO || ret == -EBADMSG) {
+	if (ret == -EIO || mtd_is_eccerr(ret)) {
 		d->curr_write_pos--;
 		eb->active_count--;
 		d->revmap[*bp] = PAGE_UNDEF;
@@ -738,7 +738,7 @@
 retry:
 	ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, d->page_buf);
 
-	if (ret < 0 && ret != -EUCLEAN) {
+	if (ret < 0 && !mtd_is_bitflip(ret)) {
 		oldeb = d->eb_data + oldblock / d->pages_per_eblk;
 		oldeb->flags |= EBLOCK_READERR;
 
@@ -931,7 +931,7 @@
 	struct mtd_oob_ops ops;
 	int ret;
 
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 	ops.len = mtd->writesize;
 	ops.ooblen = mtd->ecclayout->oobavail;
 	ops.ooboffs = 0;
@@ -1016,7 +1016,7 @@
 
 	if (ret == 0)
 		mtdswap_rb_add(d, eb, MTDSWAP_CLEAN);
-	else if (ret != -EIO && ret != -EBADMSG)
+	else if (ret != -EIO && !mtd_is_eccerr(ret))
 		mtdswap_rb_add(d, eb, MTDSWAP_DIRTY);
 
 	return 0;
@@ -1164,7 +1164,7 @@
 	ret = mtd->read(mtd, readpos, PAGE_SIZE, &retlen, buf);
 
 	d->mtd_read_count++;
-	if (ret == -EUCLEAN) {
+	if (mtd_is_bitflip(ret)) {
 		eb->flags |= EBLOCK_BITFLIP;
 		mtdswap_rb_add(d, eb, MTDSWAP_BITFLIP);
 		ret = 0;
@@ -1374,11 +1374,10 @@
 		goto revmap_fail;
 
 	eblk_bytes = sizeof(struct swap_eb)*d->eblks;
-	d->eb_data = vmalloc(eblk_bytes);
+	d->eb_data = vzalloc(eblk_bytes);
 	if (!d->eb_data)
 		goto eb_data_fail;
 
-	memset(d->eb_data, 0, eblk_bytes);
 	for (i = 0; i < pages; i++)
 		d->page_data[i] = BLOCK_UNDEF;
 
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4c34252..cce7b70 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -83,16 +83,9 @@
           scratch register here to enable this feature. On Intel Moorestown
           boards, the scratch register is at 0xFF108018.
 
-config MTD_NAND_EDB7312
-	tristate "Support for Cirrus Logic EBD7312 evaluation board"
-	depends on ARCH_EDB7312
-	help
-	  This enables the driver for the Cirrus Logic EBD7312 evaluation
-	  board to access the onboard NAND Flash.
-
 config MTD_NAND_H1900
 	tristate "iPAQ H1900 flash"
-	depends on ARCH_PXA
+	depends on ARCH_PXA && BROKEN
 	help
 	  This enables the driver for the iPAQ h1900 flash.
 
@@ -116,10 +109,11 @@
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2 and OMAP3"
-	depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+	depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
 	help
-          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+	  platforms.
 
 config MTD_NAND_IDS
 	tristate
@@ -138,7 +132,7 @@
 
 config MTD_NAND_AU1550
 	tristate "Au1550/1200 NAND support"
-	depends on SOC_AU1200 || SOC_AU1550
+	depends on MIPS_ALCHEMY
 	help
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
@@ -423,6 +417,19 @@
 	  The simulator may simulate various NAND flash chips for the
 	  MTD nand layer.
 
+config MTD_NAND_GPMI_NAND
+        bool "GPMI NAND Flash Controller driver"
+        depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+	select MTD_PARTITIONS
+	select MTD_CMDLINE_PARTS
+        help
+	 Enables NAND Flash support for IMX23 or IMX28.
+	 The GPMI controller is very powerful, with the help of BCH
+	 module, it can do the hardware ECC. The GPMI supports several
+	 NAND flashs at the same time. The GPMI may conflicts with other
+	 block, such as SD card. So pay attention to it when you enable
+	 the GPMI.
+
 config MTD_NAND_PLATFORM
 	tristate "Support for generic platform NAND driver"
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5745d83..618f4ba 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
 obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
 obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
 obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
 obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
 obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
@@ -49,5 +48,6 @@
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
 obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 55da20c..23e5d77 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -161,37 +161,6 @@
                 !!host->board->rdy_pin_active_low;
 }
 
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
 static void dma_complete_func(void *completion)
 {
 	complete(completion);
@@ -266,33 +235,27 @@
 static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
-	struct atmel_nand_host *host = chip->priv;
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
 			return;
 
-	if (host->board->bus_width_16)
-		atmel_read_buf16(mtd, buf, len);
-	else
-		atmel_read_buf8(mtd, buf, len);
+	/* if no DMA operation possible, use PIO */
+	memcpy_fromio(buf, chip->IO_ADDR_R, len);
 }
 
 static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
-	struct atmel_nand_host *host = chip->priv;
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
 			return;
 
-	if (host->board->bus_width_16)
-		atmel_write_buf16(mtd, buf, len);
-	else
-		atmel_write_buf8(mtd, buf, len);
+	/* if no DMA operation possible, use PIO */
+	memcpy_toio(chip->IO_ADDR_W, buf, len);
 }
 
 /*
@@ -481,10 +444,6 @@
 	}
 }
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
 /*
  * Probe for the NAND device.
  */
@@ -496,8 +455,6 @@
 	struct resource *regs;
 	struct resource *mem;
 	int res;
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
@@ -583,7 +540,7 @@
 
 	if (on_flash_bbt) {
 		printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
-		nand_chip->options |= NAND_USE_FLASH_BBT;
+		nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
 	}
 
 	if (!cpu_has_dma())
@@ -594,7 +551,7 @@
 
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_MEMCPY, mask);
-		host->dma_chan = dma_request_channel(mask, 0, NULL);
+		host->dma_chan = dma_request_channel(mask, NULL, NULL);
 		if (!host->dma_chan) {
 			dev_err(host->dev, "Failed to request DMA channel\n");
 			use_dma = 0;
@@ -655,27 +612,12 @@
 		goto err_scan_tail;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "atmel_nand";
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-#endif
-	if (num_partitions <= 0 && host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size,
-							 &num_partitions);
-
-	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
-		res = -ENXIO;
-		goto err_no_partitions;
-	}
-
-	res = mtd_device_register(mtd, partitions, num_partitions);
+	res = mtd_device_parse_register(mtd, NULL, 0,
+			host->board->parts, host->board->num_parts);
 	if (!res)
 		return res;
 
-err_no_partitions:
-	nand_release(mtd);
 err_scan_tail:
 err_scan_ident:
 err_no_card:
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index e7767ee..7dd3700 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,7 +19,11 @@
 #include <linux/mtd/partitions.h>
 #include <asm/io.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/mach-pb1x00/pb1550.h>
+#elif defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+#endif
 #include <asm/mach-db1x00/bcsr.h>
 
 /*
@@ -48,7 +52,7 @@
  * au_read_byte -  read one byte from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 8bit buswith
+ * read function for 8bit buswidth
  */
 static u_char au_read_byte(struct mtd_info *mtd)
 {
@@ -63,7 +67,7 @@
  * @mtd:	MTD device structure
  * @byte:	pointer to data byte to write
  *
- *  write function for 8it buswith
+ * write function for 8it buswidth
  */
 static void au_write_byte(struct mtd_info *mtd, u_char byte)
 {
@@ -73,11 +77,10 @@
 }
 
 /**
- * au_read_byte16 -  read one byte endianess aware from the chip
+ * au_read_byte16 -  read one byte endianness aware from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
  */
 static u_char au_read_byte16(struct mtd_info *mtd)
 {
@@ -88,12 +91,11 @@
 }
 
 /**
- * au_write_byte16 -  write one byte endianess aware to the chip
+ * au_write_byte16 -  write one byte endianness aware to the chip
  * @mtd:	MTD device structure
  * @byte:	pointer to data byte to write
  *
- *  write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
  */
 static void au_write_byte16(struct mtd_info *mtd, u_char byte)
 {
@@ -106,8 +108,7 @@
  * au_read_word -  read one word from the chip
  * @mtd:	MTD device structure
  *
- *  read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
  */
 static u16 au_read_word(struct mtd_info *mtd)
 {
@@ -123,7 +124,7 @@
  * @buf:	data buffer
  * @len:	number of bytes to write
  *
- *  write function for 8bit buswith
+ * write function for 8bit buswidth
  */
 static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
@@ -142,7 +143,7 @@
  * @buf:	buffer to store date
  * @len:	number of bytes to read
  *
- *  read function for 8bit buswith
+ * read function for 8bit buswidth
  */
 static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
@@ -161,7 +162,7 @@
  * @buf:	buffer containing the data to compare
  * @len:	number of bytes to compare
  *
- *  verify function for 8bit buswith
+ * verify function for 8bit buswidth
  */
 static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
@@ -183,7 +184,7 @@
  * @buf:	data buffer
  * @len:	number of bytes to write
  *
- *  write function for 16bit buswith
+ * write function for 16bit buswidth
  */
 static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 {
@@ -205,7 +206,7 @@
  * @buf:	buffer to store date
  * @len:	number of bytes to read
  *
- *  read function for 16bit buswith
+ * read function for 16bit buswidth
  */
 static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 {
@@ -226,7 +227,7 @@
  * @buf:	buffer containing the data to compare
  * @len:	number of bytes to compare
  *
- *  verify function for 16bit buswith
+ * verify function for 16bit buswidth
  */
 static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 {
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index eddc9a2..2e42ec2 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -172,9 +172,9 @@
 
 	/* Enable the following for a flash based bad block table */
 	/*
-	   this->options = NAND_USE_FLASH_BBT;
+	   this->bbt_options = NAND_BBT_USE_FLASH;
 	 */
-	this->options = NAND_USE_FLASH_BBT;
+	this->bbt_options = NAND_BBT_USE_FLASH;
 
 	/* Scan to find existence of the device */
 	if (nand_scan(autcpu12_mtd, 1)) {
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 8c569e4..46b58d6 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -52,8 +52,6 @@
 static const __devinitconst char gBanner[] = KERN_INFO \
 	"BCM UMI MTD NAND Driver: 1.00\n";
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 #if NAND_ECC_BCH
 static uint8_t scan_ff_pattern[] = { 0xff };
 
@@ -376,16 +374,18 @@
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	if (!r)
-		return -ENXIO;
+	if (!r) {
+		err = -ENXIO;
+		goto out_free;
+	}
 
 	/* map physical address */
 	bcm_umi_io_base = ioremap(r->start, resource_size(r));
 
 	if (!bcm_umi_io_base) {
 		printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
-		kfree(board_mtd);
-		return -EIO;
+		err = -EIO;
+		goto out_free;
 	}
 
 	/* Get pointer to private data */
@@ -401,9 +401,8 @@
 	/* Initialize the NAND hardware.  */
 	if (bcm_umi_nand_inithw() < 0) {
 		printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return -EIO;
+		err = -EIO;
+		goto out_unmap;
 	}
 
 	/* Set address of NAND IO lines */
@@ -436,7 +435,7 @@
 #if USE_DMA
 	err = nand_dma_init();
 	if (err != 0)
-		return err;
+		goto out_unmap;
 #endif
 
 	/* Figure out the size of the device that we have.
@@ -447,9 +446,7 @@
 	err = nand_scan_ident(board_mtd, 1, NULL);
 	if (err) {
 		printk(KERN_ERR "nand_scan failed: %d\n", err);
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return err;
+		goto out_unmap;
 	}
 
 	/* Now that we know the nand size, we can setup the ECC layout */
@@ -468,13 +465,14 @@
 		{
 			printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
 					 board_mtd->writesize);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out_unmap;
 		}
 	}
 
 #if NAND_ECC_BCH
 	if (board_mtd->writesize > 512) {
-		if (this->options & NAND_USE_FLASH_BBT)
+		if (this->bbt_options & NAND_BBT_USE_FLASH)
 			largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
 		this->badblock_pattern = &largepage_bbt;
 	}
@@ -485,33 +483,20 @@
 	err = nand_scan_tail(board_mtd);
 	if (err) {
 		printk(KERN_ERR "nand_scan failed: %d\n", err);
-		iounmap(bcm_umi_io_base);
-		kfree(board_mtd);
-		return err;
+		goto out_unmap;
 	}
 
 	/* Register the partitions */
-	{
-		int nr_partitions;
-		struct mtd_partition *partition_info;
-
-		board_mtd->name = "bcm_umi-nand";
-		nr_partitions =
-		    parse_mtd_partitions(board_mtd, part_probes,
-					 &partition_info, 0);
-
-		if (nr_partitions <= 0) {
-			printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
-			       nr_partitions);
-			iounmap(bcm_umi_io_base);
-			kfree(board_mtd);
-			return -EIO;
-		}
-		mtd_device_register(board_mtd, partition_info, nr_partitions);
-	}
+	board_mtd->name = "bcm_umi-nand";
+	mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
 
 	/* Return happy */
 	return 0;
+out_unmap:
+	iounmap(bcm_umi_io_base);
+out_free:
+	kfree(board_mtd);
+	return err;
 }
 
 static int bcm_umi_nand_remove(struct platform_device *pdev)
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 87ebb4e..72d3f23 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/io.h>
 
 #define CAFE_NAND_CTRL1		0x00
@@ -57,7 +58,6 @@
 
 struct cafe_priv {
 	struct nand_chip nand;
-	struct mtd_partition *parts;
 	struct pci_dev *pdev;
 	void __iomem *mmio;
 	struct rs_control *rs;
@@ -371,7 +371,7 @@
 	return 1;
 }
 /**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @buf:	buffer to store read data
@@ -630,8 +630,6 @@
 	struct cafe_priv *cafe;
 	uint32_t ctrl;
 	int err = 0;
-	struct mtd_partition *parts;
-	int nr_parts;
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
@@ -686,7 +684,8 @@
 	cafe->nand.chip_delay = 0;
 
 	/* Enable the following for a flash based bad block table */
-	cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+	cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+	cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
 
 	if (skipbbt) {
 		cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -799,18 +798,9 @@
 
 	pci_set_drvdata(pdev, mtd);
 
-	/* We register the whole device first, separate from the partitions */
-	mtd_device_register(mtd, NULL, 0);
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "cafe_nand";
-#endif
-	nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-	if (nr_parts > 0) {
-		cafe->parts = parts;
-		dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
-		mtd_device_register(mtd, parts, nr_parts);
-	}
+	mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+
 	goto out;
 
  out_irq:
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 6fc043a..737ef9a 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -50,8 +51,6 @@
 };
 #define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static u_char cmx270_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -151,9 +150,6 @@
 static int __init cmx270_init(void)
 {
 	struct nand_chip *this;
-	const char *part_type;
-	struct mtd_partition *mtd_parts;
-	int mtd_parts_nb = 0;
 	int ret;
 
 	if (!(machine_is_armcore() && cpu_is_pxa27x()))
@@ -222,23 +218,9 @@
 		goto err_scan;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
-					    &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (!mtd_parts_nb) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
 	/* Register the partitions */
-	pr_notice("Using %s partition definition\n", part_type);
-	ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+	ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+					partition_info, NUM_PARTITIONS);
 	if (ret)
 		goto err_scan;
 
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index f59ad1f..414afa7 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -239,7 +239,8 @@
 	this->ecc.correct  = nand_correct_data;
 
 	/* Enable the following for a flash based bad block table */
-	this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+	this->bbt_options = NAND_BBT_USE_FLASH;
+	this->options = NAND_NO_AUTOINCR;
 
 	/* Scan to find existence of the device */
 	if (nand_scan(new_mtd, 1)) {
@@ -277,15 +278,11 @@
 	return 0;
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static int __init cs553x_init(void)
 {
 	int err = -ENXIO;
 	int i;
 	uint64_t val;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = NULL;
 
 	/* If the CPU isn't a Geode GX or LX, abort */
 	if (!is_geode())
@@ -315,13 +312,9 @@
 	   do mtdconcat etc. if we want to. */
 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 		if (cs553x_mtd[i]) {
-
 			/* If any devices registered, return success. Else the last error. */
-			mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
-			if (mtd_parts_nb > 0)
-				printk(KERN_NOTICE "Using command line partition definition\n");
-			mtd_device_register(cs553x_mtd[i], mtd_parts,
-					    mtd_parts_nb);
+			mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+						  NULL, 0);
 			err = 0;
 		}
 	}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 1f34951..c153e1f 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -57,7 +57,6 @@
 
 	struct device		*dev;
 	struct clk		*clk;
-	bool			partitioned;
 
 	bool			is_readmode;
 
@@ -530,8 +529,6 @@
 	int				ret;
 	uint32_t			val;
 	nand_ecc_modes_t		ecc_mode;
-	struct mtd_partition		*mtd_parts = NULL;
-	int				mtd_parts_nb = 0;
 
 	/* insist on board-specific configuration */
 	if (!pdata)
@@ -581,7 +578,9 @@
 	info->chip.chip_delay	= 0;
 	info->chip.select_chip	= nand_davinci_select_chip;
 
-	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+	/* options such as NAND_BBT_USE_FLASH */
+	info->chip.bbt_options	= pdata->bbt_options;
+	/* options such as 16-bit widths */
 	info->chip.options	= pdata->options;
 	info->chip.bbt_td	= pdata->bbt_td;
 	info->chip.bbt_md	= pdata->bbt_md;
@@ -751,33 +750,8 @@
 	if (ret < 0)
 		goto err_scan;
 
-	if (mtd_has_cmdlinepart()) {
-		static const char *probes[] __initconst = {
-			"cmdlinepart", NULL
-		};
-
-		mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
-						    &mtd_parts, 0);
-	}
-
-	if (mtd_parts_nb <= 0) {
-		mtd_parts = pdata->parts;
-		mtd_parts_nb = pdata->nr_parts;
-	}
-
-	/* Register any partitions */
-	if (mtd_parts_nb > 0) {
-		ret = mtd_device_register(&info->mtd, mtd_parts,
-					  mtd_parts_nb);
-		if (ret == 0)
-			info->partitioned = true;
-	}
-
-	/* If there's no partition info, just package the whole chip
-	 * as a single MTD device.
-	 */
-	if (!info->partitioned)
-		ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0;
+	ret = mtd_device_parse_register(&info->mtd, NULL, 0,
+			pdata->parts, pdata->nr_parts);
 
 	if (ret < 0)
 		goto err_scan;
@@ -816,9 +790,6 @@
 static int __exit nand_davinci_remove(struct platform_device *pdev)
 {
 	struct davinci_nand_info *info = platform_get_drvdata(pdev);
-	int status;
-
-	status = mtd_device_unregister(&info->mtd);
 
 	spin_lock_irq(&davinci_nand_lock);
 	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index d527621..3984d48 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1346,6 +1346,7 @@
 	 * */
 	denali->bbtskipbytes = ioread32(denali->flash_reg +
 						SPARE_AREA_SKIP_BYTES);
+	detect_max_banks(denali);
 	denali_nand_reset(denali);
 	iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
 	iowrite32(CHIP_EN_DONT_CARE__FLAG,
@@ -1356,7 +1357,6 @@
 	/* Should set value for these registers when init */
 	iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
 	iowrite32(1, denali->flash_reg + ECC_ENABLE);
-	detect_max_banks(denali);
 	denali_nand_timing_set(denali);
 	denali_irq_init(denali);
 }
@@ -1577,7 +1577,8 @@
 	denali->nand.bbt_md = &bbt_mirror_descr;
 
 	/* skip the scan for now until we have OOB read and write support */
-	denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+	denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+	denali->nand.options |= NAND_SKIP_BBTSCAN;
 	denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 
 	/* Denali Controller only support 15bit and 8bit ECC in MRST,
@@ -1676,7 +1677,6 @@
 	struct denali_nand_info *denali = pci_get_drvdata(dev);
 
 	nand_release(&denali->mtd);
-	mtd_device_unregister(&denali->mtd);
 
 	denali_irq_cleanup(dev->irq, denali);
 
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 7837728..5780dba 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -31,6 +31,7 @@
 #include <linux/mtd/doc2000.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/inftl.h>
+#include <linux/module.h>
 
 /* Where to look for the devices? */
 #ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
@@ -132,7 +133,7 @@
 
 /*
  * The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
  * Reed-Solomon library code.
  *
  * Fabrice Bellard figured this out in the old docecc code. I added
@@ -153,7 +154,7 @@
 	ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
 	parity = ecc[1];
 
-	/* Initialize the syndrom buffer */
+	/* Initialize the syndrome buffer */
 	for (i = 0; i < NROOTS; i++)
 		s[i] = ds[0];
 	/*
@@ -1031,7 +1032,7 @@
 		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
 	else
 		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
-	if (no_ecc_failures && (ret == -EBADMSG)) {
+	if (no_ecc_failures && mtd_is_eccerr(ret)) {
 		printk(KERN_ERR "suppressing ECC failure\n");
 		ret = 0;
 	}
@@ -1652,7 +1653,7 @@
 	nand->ecc.mode		= NAND_ECC_HW_SYNDROME;
 	nand->ecc.size		= 512;
 	nand->ecc.bytes		= 6;
-	nand->options		= NAND_USE_FLASH_BBT;
+	nand->bbt_options	= NAND_BBT_USE_FLASH;
 
 	doc->physadr		= physadr;
 	doc->virtadr		= virtadr;
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
deleted file mode 100644
index 8400d0f..0000000
--- a/drivers/mtd/nand/edb7312.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- *  drivers/mtd/nand/edb7312.c
- *
- *  Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- *  Derived from drivers/mtd/nand/autcpu12.c
- *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Overview:
- *   This is a device driver for the NAND flash device found on the
- *   CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- *   a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h>	/* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000	/* Phys address of flash */
-#define EP7312_PXDR	0x0001	/*
-				 * IO offset to Port B data register
-				 * where the CLE, ALE and NCE pins
-				 * are wired to.
-				 */
-#define EP7312_PXDDR	0x0041	/*
-				 * IO offset to Port B data direction
-				 * register so we can control the IO
-				 * lines.
-				 */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
-	{.name = "EP7312 Nand Flash",
-	 .offset = 0,
-	 .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- *	hardware specific access to control-lines
- *
- *	NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- *	NAND_CLE: bit 1 -> bit 4
- *	NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned char bits = 0x80;
-
-		bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
-		bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
-		clps_writeb((clps_readb(ep7312_pxdr)  & 0xF0) | bits,
-			    ep7312_pxdr);
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- *	read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
-	return 1;
-}
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
-	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
-	void __iomem *ep7312_fio_base;
-
-	/* Allocate memory for MTD device structure and private data */
-	ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!ep7312_mtd) {
-		printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* map physical address */
-	ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
-	if (!ep7312_fio_base) {
-		printk("ioremap EDB7312 NAND flash failed\n");
-		kfree(ep7312_mtd);
-		return -EIO;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&ep7312_mtd[1]);
-
-	/* Initialize structures */
-	memset(ep7312_mtd, 0, sizeof(struct mtd_info));
-	memset(this, 0, sizeof(struct nand_chip));
-
-	/* Link the private data with the MTD structure */
-	ep7312_mtd->priv = this;
-	ep7312_mtd->owner = THIS_MODULE;
-
-	/*
-	 * Set GPIO Port B control register so that the pins are configured
-	 * to be outputs for controlling the NAND flash.
-	 */
-	clps_writeb(0xf0, ep7312_pxddr);
-
-	/* insert callbacks */
-	this->IO_ADDR_R = ep7312_fio_base;
-	this->IO_ADDR_W = ep7312_fio_base;
-	this->cmd_ctrl = ep7312_hwcontrol;
-	this->dev_ready = ep7312_device_ready;
-	/* 15 us command delay time */
-	this->chip_delay = 15;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(ep7312_mtd, 1)) {
-		iounmap((void *)ep7312_fio_base);
-		kfree(ep7312_mtd);
-		return -ENXIO;
-	}
-	ep7312_mtd->name = "edb7312-nand";
-	mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
-
-	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
-	/* Return happy */
-	return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
-	struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
-	/* Release resources, unregister device */
-	nand_release(ap7312_mtd);
-
-	/* Release io resource */
-	iounmap(this->IO_ADDR_R);
-
-	/* Free the MTD device structure */
-	kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 33d8aad..eedd8ee 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,6 @@
 	unsigned int use_mdr;    /* Non zero if the MDR is to be set      */
 	unsigned int oob;        /* Non zero if operating on OOB data     */
 	unsigned int counter;	 /* counter for the initializations	  */
-	char *oob_poi;           /* Place to write ECC after read back    */
 };
 
 /* These map to the positions used by the FCM hardware ECC generator */
@@ -244,6 +243,25 @@
 		return -EIO;
 	}
 
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return 0;
+
+	if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+		uint32_t lteccr = in_be32(&lbc->lteccr);
+		/*
+		 * if command was a full page read and the ELBC
+		 * has the LTECCR register, then bits 12-15 (ppc order) of
+		 * LTECCR indicates which 512 byte sub-pages had fixed errors.
+		 * bits 28-31 are uncorrectable errors, marked elsewhere.
+		 * for small page nand only 1 bit is used.
+		 * if the ELBC doesn't have the lteccr register it reads 0
+		 */
+		if (lteccr & 0x000F000F)
+			out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+		if (lteccr & 0x000F0000)
+			mtd->ecc_stats.corrected++;
+	}
+
 	return 0;
 }
 
@@ -435,7 +453,6 @@
 
 	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
 	case NAND_CMD_PAGEPROG: {
-		int full_page;
 		dev_vdbg(priv->dev,
 		         "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
 			 "writing %d bytes.\n", elbc_fcm_ctrl->index);
@@ -445,34 +462,12 @@
 		 * write so the HW generates the ECC.
 		 */
 		if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
-		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+		    elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
 			out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
-			full_page = 0;
-		} else {
+		else
 			out_be32(&lbc->fbcr, 0);
-			full_page = 1;
-		}
 
 		fsl_elbc_run_command(mtd);
-
-		/* Read back the page in order to fill in the ECC for the
-		 * caller.  Is this really needed?
-		 */
-		if (full_page && elbc_fcm_ctrl->oob_poi) {
-			out_be32(&lbc->fbcr, 3);
-			set_addr(mtd, 6, page_addr, 1);
-
-			elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
-
-			fsl_elbc_do_read(chip, 1);
-			fsl_elbc_run_command(mtd);
-
-			memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
-				&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
-			elbc_fcm_ctrl->index += 3;
-		}
-
-		elbc_fcm_ctrl->oob_poi = NULL;
 		return;
 	}
 
@@ -752,13 +747,8 @@
                                 struct nand_chip *chip,
                                 const uint8_t *buf)
 {
-	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
-
 	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
-	elbc_fcm_ctrl->oob_poi = chip->oob_poi;
 }
 
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
@@ -791,8 +781,8 @@
 	chip->bbt_md = &bbt_mirror_descr;
 
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-			NAND_USE_FLASH_BBT;
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 
 	chip->controller = &elbc_fcm_ctrl->controller;
 	chip->priv = priv;
@@ -829,7 +819,6 @@
 
 	elbc_fcm_ctrl->chips[priv->bank] = NULL;
 	kfree(priv);
-	kfree(elbc_fcm_ctrl);
 	return 0;
 }
 
@@ -842,13 +831,14 @@
 	struct resource res;
 	struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
 	static const char *part_probe_types[]
-		= { "cmdlinepart", "RedBoot", NULL };
-	struct mtd_partition *parts;
+		= { "cmdlinepart", "RedBoot", "ofpart", NULL };
 	int ret;
 	int bank;
 	struct device *dev;
 	struct device_node *node = pdev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
 
+	ppdata.of_node = pdev->dev.of_node;
 	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
 		return -ENODEV;
 	lbc = fsl_lbc_ctrl_dev->regs;
@@ -934,17 +924,8 @@
 
 	/* First look for RedBoot table or partitions on the command
 	 * line, these take precedence over device tree information */
-	ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
-	if (ret < 0)
-		goto err;
-
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(priv->dev, node, &parts);
-		if (ret < 0)
-			goto err;
-	}
-
-	mtd_device_register(&priv->mtd, parts, ret);
+	mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+				  NULL, 0);
 
 	printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
 	       (unsigned long long)res.start, priv->bank);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 23752fd..b4f3cc9 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -158,7 +158,7 @@
 {
 	int ret;
 	struct device_node *flash_np;
-	static const char *part_types[] = { "cmdlinepart", NULL, };
+	struct mtd_part_parser_data ppdata;
 
 	fun->chip.IO_ADDR_R = fun->io_base;
 	fun->chip.IO_ADDR_W = fun->io_base;
@@ -192,18 +192,12 @@
 	if (ret)
 		goto err;
 
-	ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
-		if (ret < 0)
-			goto err;
-	}
-#endif
-	ret = mtd_device_register(&fun->mtd, fun->parts, ret);
+	ppdata.of_node = flash_np;
+	ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
 err:
 	of_node_put(flash_np);
+	if (ret)
+		kfree(fun->mtd.name);
 	return ret;
 }
 
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index e9b275a..e53b760 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -146,7 +146,7 @@
 	{
 		.name = "Root File System",
 		.offset = 0x460000,
-		.size = 0,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
@@ -173,13 +173,10 @@
 	{
 		.name = "Root File System",
 		.offset = 0x800000,
-		.size = 0,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
 
 /**
  * struct fsmc_nand_data - structure for FSMC NAND device state
@@ -187,8 +184,6 @@
  * @pid:		Part ID on the AMBA PrimeCell format
  * @mtd:		MTD info for a NAND flash.
  * @nand:		Chip related info for a NAND flash.
- * @partitions:		Partition info for a NAND Flash.
- * @nr_partitions:	Total number of partition of a NAND flash.
  *
  * @ecc_place:		ECC placing locations in oobfree type format.
  * @bank:		Bank number for probed device.
@@ -203,8 +198,6 @@
 	u32			pid;
 	struct mtd_info		mtd;
 	struct nand_chip	nand;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
 
 	struct fsmc_eccplace	*ecc_place;
 	unsigned int		bank;
@@ -716,65 +709,17 @@
 	 * platform data,
 	 * default partition information present in driver.
 	 */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	/*
-	 * Check if partition info passed via command line
+	 * Check for partition info passed
 	 */
 	host->mtd.name = "nand";
-	host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
-			&host->partitions, 0);
-	if (host->nr_partitions <= 0) {
-#endif
-		/*
-		 * Check if partition info passed via command line
-		 */
-		if (pdata->partitions) {
-			host->partitions = pdata->partitions;
-			host->nr_partitions = pdata->nr_partitions;
-		} else {
-			struct mtd_partition *partition;
-			int i;
-
-			/* Select the default partitions info */
-			switch (host->mtd.size) {
-			case 0x01000000:
-			case 0x02000000:
-			case 0x04000000:
-				host->partitions = partition_info_16KB_blk;
-				host->nr_partitions =
-					sizeof(partition_info_16KB_blk) /
-					sizeof(struct mtd_partition);
-				break;
-			case 0x08000000:
-			case 0x10000000:
-			case 0x20000000:
-			case 0x40000000:
-				host->partitions = partition_info_128KB_blk;
-				host->nr_partitions =
-					sizeof(partition_info_128KB_blk) /
-					sizeof(struct mtd_partition);
-				break;
-			default:
-				ret = -ENXIO;
-				pr_err("Unsupported NAND size\n");
-				goto err_probe;
-			}
-
-			partition = host->partitions;
-			for (i = 0; i < host->nr_partitions; i++, partition++) {
-				if (partition->size == 0) {
-					partition->size = host->mtd.size -
-						partition->offset;
-					break;
-				}
-			}
-		}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	}
-#endif
-
-	ret = mtd_device_register(&host->mtd, host->partitions,
-				  host->nr_partitions);
+	ret = mtd_device_parse_register(&host->mtd, NULL, 0,
+			host->mtd.size <= 0x04000000 ?
+				partition_info_16KB_blk :
+				partition_info_128KB_blk,
+			host->mtd.size <= 0x04000000 ?
+				ARRAY_SIZE(partition_info_16KB_blk) :
+				ARRAY_SIZE(partition_info_128KB_blk));
 	if (ret)
 		goto err_probe;
 
@@ -822,7 +767,7 @@
 	platform_set_drvdata(pdev, NULL);
 
 	if (host) {
-		mtd_device_unregister(&host->mtd);
+		nand_release(&host->mtd);
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 0000000..3a46248
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
new file mode 100644
index 0000000..4effb8c
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -0,0 +1,84 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL				0x00000000
+#define HW_BCH_CTRL_SET				0x00000004
+#define HW_BCH_CTRL_CLR				0x00000008
+#define HW_BCH_CTRL_TOG				0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN		(1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
+
+#define HW_BCH_STATUS0				0x00000010
+#define HW_BCH_MODE				0x00000020
+#define HW_BCH_ENCODEPTR			0x00000030
+#define HW_BCH_DATAPTR				0x00000040
+#define HW_BCH_METAPTR				0x00000050
+#define HW_BCH_LAYOUTSELECT			0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0			0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS		24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	(0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v)		\
+	(((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE		16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	(0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+					 & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0		12
+#define BM_BCH_FLASH0LAYOUT0_ECC0	(0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v)		\
+	(((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE		0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE		\
+			(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
+					 & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1			0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE		16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE		\
+			(0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+					 & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN		12
+#define BM_BCH_FLASH0LAYOUT1_ECCN	(0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v)		\
+	(((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE		0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE		\
+			(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v)	\
+	(((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+					 & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
new file mode 100644
index 0000000..de4db760
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -0,0 +1,1057 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <mach/mxs.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+struct timing_threshod timing_default_threshold = {
+	.max_data_setup_cycles       = (BM_GPMI_TIMING0_DATA_SETUP >>
+						BP_GPMI_TIMING0_DATA_SETUP),
+	.internal_data_setup_in_ns   = 0,
+	.max_sample_delay_factor     = (BM_GPMI_CTRL1_RDN_DELAY >>
+						BP_GPMI_CTRL1_RDN_DELAY),
+	.max_dll_clock_period_in_ns  = 32,
+	.max_dll_delay_in_ns         = 16,
+};
+
+/*
+ * Clear the bit and poll it cleared.  This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+	int timeout = 0x400;
+
+	/* clear the bit */
+	__mxs_clrl(mask, addr);
+
+	/*
+	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
+	 * recommends to wait 1us.
+	 */
+	udelay(1);
+
+	/* poll the bit becoming clear */
+	while ((readl(addr) & mask) && --timeout)
+		/* nothing */;
+
+	return !timeout;
+}
+
+#define MODULE_CLKGATE		(1 << 30)
+#define MODULE_SFTRST		(1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ *  [1] enable the module.
+ *  [2] reset the module.
+ *
+ * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+	int ret;
+	int timeout = 0x400;
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear CLKGATE */
+	__mxs_clrl(MODULE_CLKGATE, reset_addr);
+
+	if (!just_enable) {
+		/* set SFTRST to reset the block */
+		__mxs_setl(MODULE_SFTRST, reset_addr);
+		udelay(1);
+
+		/* poll CLKGATE becoming set */
+		while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+			/* nothing */;
+		if (unlikely(!timeout))
+			goto error;
+	}
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear and poll CLKGATE */
+	ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+	if (unlikely(ret))
+		goto error;
+
+	return 0;
+
+error:
+	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+	return -ETIMEDOUT;
+}
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	int ret;
+
+	ret = clk_enable(r->clock);
+	if (ret)
+		goto err_out;
+	ret = gpmi_reset_block(r->gpmi_regs, false);
+	if (ret)
+		goto err_out;
+
+	/* Choose NAND mode. */
+	writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* Set the IRQ polarity. */
+	writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+				r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Disable Write-Protection. */
+	writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Select BCH ECC. */
+	writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	clk_disable(r->clock);
+	return 0;
+err_out:
+	return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	struct bch_geometry *geo = &this->bch_geometry;
+	u32 reg;
+	int i;
+
+	pr_err("Show GPMI registers :\n");
+	for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+		reg = readl(r->gpmi_regs + i * 0x10);
+		pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+	}
+
+	/* start to print out the BCH info */
+	pr_err("BCH Geometry :\n");
+	pr_err("GF length              : %u\n", geo->gf_len);
+	pr_err("ECC Strength           : %u\n", geo->ecc_strength);
+	pr_err("Page Size in Bytes     : %u\n", geo->page_size);
+	pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
+	pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
+	pr_err("ECC Chunk Count        : %u\n", geo->ecc_chunk_count);
+	pr_err("Payload Size in Bytes  : %u\n", geo->payload_size);
+	pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
+	pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
+	pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
+	pr_err("Block Mark Bit Offset  : %u\n", geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH.  */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	struct bch_geometry *bch_geo = &this->bch_geometry;
+	unsigned int block_count;
+	unsigned int block_size;
+	unsigned int metadata_size;
+	unsigned int ecc_strength;
+	unsigned int page_size;
+	int ret;
+
+	if (common_nfc_set_geometry(this))
+		return !0;
+
+	block_count   = bch_geo->ecc_chunk_count - 1;
+	block_size    = bch_geo->ecc_chunk_size;
+	metadata_size = bch_geo->metadata_size;
+	ecc_strength  = bch_geo->ecc_strength >> 1;
+	page_size     = bch_geo->page_size;
+
+	ret = clk_enable(r->clock);
+	if (ret)
+		goto err_out;
+
+	ret = gpmi_reset_block(r->bch_regs, true);
+	if (ret)
+		goto err_out;
+
+	/* Configure layout 0. */
+	writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+			| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
+			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+			r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+	writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
+			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+	/* Set *all* chip selects to use layout 0. */
+	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+	/* Enable interrupts. */
+	writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+				r->bch_regs + HW_BCH_CTRL_SET);
+
+	clk_disable(r->clock);
+	return 0;
+err_out:
+	return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+			unsigned int period, unsigned int min)
+{
+	unsigned int k;
+
+	k = (time + period - 1) / period;
+	return max(k, min);
+}
+
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+					struct gpmi_nfc_hardware_timing *hw)
+{
+	struct gpmi_nand_platform_data *pdata = this->pdata;
+	struct timing_threshod *nfc = &timing_default_threshold;
+	struct nand_chip *nand = &this->nand;
+	struct nand_timing target = this->timing;
+	bool improved_timing_is_available;
+	unsigned long clock_frequency_in_hz;
+	unsigned int clock_period_in_ns;
+	bool dll_use_half_periods;
+	unsigned int dll_delay_shift;
+	unsigned int max_sample_delay_in_ns;
+	unsigned int address_setup_in_cycles;
+	unsigned int data_setup_in_ns;
+	unsigned int data_setup_in_cycles;
+	unsigned int data_hold_in_cycles;
+	int ideal_sample_delay_in_ns;
+	unsigned int sample_delay_factor;
+	int tEYE;
+	unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
+	unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+
+	/*
+	 * If there are multiple chips, we need to relax the timings to allow
+	 * for signal distortion due to higher capacitance.
+	 */
+	if (nand->numchips > 2) {
+		target.data_setup_in_ns    += 10;
+		target.data_hold_in_ns     += 10;
+		target.address_setup_in_ns += 10;
+	} else if (nand->numchips > 1) {
+		target.data_setup_in_ns    += 5;
+		target.data_hold_in_ns     += 5;
+		target.address_setup_in_ns += 5;
+	}
+
+	/* Check if improved timing information is available. */
+	improved_timing_is_available =
+		(target.tREA_in_ns  >= 0) &&
+		(target.tRLOH_in_ns >= 0) &&
+		(target.tRHOH_in_ns >= 0) ;
+
+	/* Inspect the clock. */
+	clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+	clock_period_in_ns    = 1000000000 / clock_frequency_in_hz;
+
+	/*
+	 * The NFC quantizes setup and hold parameters in terms of clock cycles.
+	 * Here, we quantize the setup and hold timing parameters to the
+	 * next-highest clock period to make sure we apply at least the
+	 * specified times.
+	 *
+	 * For data setup and data hold, the hardware interprets a value of zero
+	 * as the largest possible delay. This is not what's intended by a zero
+	 * in the input parameter, so we impose a minimum of one cycle.
+	 */
+	data_setup_in_cycles    = ns_to_cycles(target.data_setup_in_ns,
+							clock_period_in_ns, 1);
+	data_hold_in_cycles     = ns_to_cycles(target.data_hold_in_ns,
+							clock_period_in_ns, 1);
+	address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+							clock_period_in_ns, 0);
+
+	/*
+	 * The clock's period affects the sample delay in a number of ways:
+	 *
+	 * (1) The NFC HAL tells us the maximum clock period the sample delay
+	 *     DLL can tolerate. If the clock period is greater than half that
+	 *     maximum, we must configure the DLL to be driven by half periods.
+	 *
+	 * (2) We need to convert from an ideal sample delay, in ns, to a
+	 *     "sample delay factor," which the NFC uses. This factor depends on
+	 *     whether we're driving the DLL with full or half periods.
+	 *     Paraphrasing the reference manual:
+	 *
+	 *         AD = SDF x 0.125 x RP
+	 *
+	 * where:
+	 *
+	 *     AD   is the applied delay, in ns.
+	 *     SDF  is the sample delay factor, which is dimensionless.
+	 *     RP   is the reference period, in ns, which is a full clock period
+	 *          if the DLL is being driven by full periods, or half that if
+	 *          the DLL is being driven by half periods.
+	 *
+	 * Let's re-arrange this in a way that's more useful to us:
+	 *
+	 *                        8
+	 *         SDF  =  AD x ----
+	 *                       RP
+	 *
+	 * The reference period is either the clock period or half that, so this
+	 * is:
+	 *
+	 *                        8       AD x DDF
+	 *         SDF  =  AD x -----  =  --------
+	 *                      f x P        P
+	 *
+	 * where:
+	 *
+	 *       f  is 1 or 1/2, depending on how we're driving the DLL.
+	 *       P  is the clock period.
+	 *     DDF  is the DLL Delay Factor, a dimensionless value that
+	 *          incorporates all the constants in the conversion.
+	 *
+	 * DDF will be either 8 or 16, both of which are powers of two. We can
+	 * reduce the cost of this conversion by using bit shifts instead of
+	 * multiplication or division. Thus:
+	 *
+	 *                 AD << DDS
+	 *         SDF  =  ---------
+	 *                     P
+	 *
+	 *     or
+	 *
+	 *         AD  =  (SDF >> DDS) x P
+	 *
+	 * where:
+	 *
+	 *     DDS  is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+	 */
+	if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+		dll_use_half_periods = true;
+		dll_delay_shift      = 3 + 1;
+	} else {
+		dll_use_half_periods = false;
+		dll_delay_shift      = 3;
+	}
+
+	/*
+	 * Compute the maximum sample delay the NFC allows, under current
+	 * conditions. If the clock is running too slowly, no sample delay is
+	 * possible.
+	 */
+	if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+		max_sample_delay_in_ns = 0;
+	else {
+		/*
+		 * Compute the delay implied by the largest sample delay factor
+		 * the NFC allows.
+		 */
+		max_sample_delay_in_ns =
+			(nfc->max_sample_delay_factor * clock_period_in_ns) >>
+								dll_delay_shift;
+
+		/*
+		 * Check if the implied sample delay larger than the NFC
+		 * actually allows.
+		 */
+		if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+			max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+	}
+
+	/*
+	 * Check if improved timing information is available. If not, we have to
+	 * use a less-sophisticated algorithm.
+	 */
+	if (!improved_timing_is_available) {
+		/*
+		 * Fold the read setup time required by the NFC into the ideal
+		 * sample delay.
+		 */
+		ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+						nfc->internal_data_setup_in_ns;
+
+		/*
+		 * The ideal sample delay may be greater than the maximum
+		 * allowed by the NFC. If so, we can trade off sample delay time
+		 * for more data setup time.
+		 *
+		 * In each iteration of the following loop, we add a cycle to
+		 * the data setup time and subtract a corresponding amount from
+		 * the sample delay until we've satisified the constraints or
+		 * can't do any better.
+		 */
+		while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+			data_setup_in_cycles++;
+			ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+			if (ideal_sample_delay_in_ns < 0)
+				ideal_sample_delay_in_ns = 0;
+
+		}
+
+		/*
+		 * Compute the sample delay factor that corresponds most closely
+		 * to the ideal sample delay. If the result is too large for the
+		 * NFC, use the maximum value.
+		 *
+		 * Notice that we use the ns_to_cycles function to compute the
+		 * sample delay factor. We do this because the form of the
+		 * computation is the same as that for calculating cycles.
+		 */
+		sample_delay_factor =
+			ns_to_cycles(
+				ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+		if (sample_delay_factor > nfc->max_sample_delay_factor)
+			sample_delay_factor = nfc->max_sample_delay_factor;
+
+		/* Skip to the part where we return our results. */
+		goto return_results;
+	}
+
+	/*
+	 * If control arrives here, we have more detailed timing information,
+	 * so we can use a better algorithm.
+	 */
+
+	/*
+	 * Fold the read setup time required by the NFC into the maximum
+	 * propagation delay.
+	 */
+	max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+	/*
+	 * Earlier, we computed the number of clock cycles required to satisfy
+	 * the data setup time. Now, we need to know the actual nanoseconds.
+	 */
+	data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+	/*
+	 * Compute tEYE, the width of the data eye when reading from the NAND
+	 * Flash. The eye width is fundamentally determined by the data setup
+	 * time, perturbed by propagation delays and some characteristics of the
+	 * NAND Flash device.
+	 *
+	 * start of the eye = max_prop_delay + tREA
+	 * end of the eye   = min_prop_delay + tRHOH + data_setup
+	 */
+	tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+							(int)data_setup_in_ns;
+
+	tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+	/*
+	 * The eye must be open. If it's not, we can try to open it by
+	 * increasing its main forcer, the data setup time.
+	 *
+	 * In each iteration of the following loop, we increase the data setup
+	 * time by a single clock cycle. We do this until either the eye is
+	 * open or we run into NFC limits.
+	 */
+	while ((tEYE <= 0) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+	}
+
+	/*
+	 * When control arrives here, the eye is open. The ideal time to sample
+	 * the data is in the center of the eye:
+	 *
+	 *     end of the eye + start of the eye
+	 *     ---------------------------------  -  data_setup
+	 *                    2
+	 *
+	 * After some algebra, this simplifies to the code immediately below.
+	 */
+	ideal_sample_delay_in_ns =
+		((int)max_prop_delay_in_ns +
+			(int)target.tREA_in_ns +
+				(int)min_prop_delay_in_ns +
+					(int)target.tRHOH_in_ns -
+						(int)data_setup_in_ns) >> 1;
+
+	/*
+	 * The following figure illustrates some aspects of a NAND Flash read:
+	 *
+	 *
+	 *           __                   _____________________________________
+	 * RDN         \_________________/
+	 *
+	 *                                         <---- tEYE ----->
+	 *                                        /-----------------\
+	 * Read Data ----------------------------<                   >---------
+	 *                                        \-----------------/
+	 *             ^                 ^                 ^              ^
+	 *             |                 |                 |              |
+	 *             |<--Data Setup -->|<--Delay Time -->|              |
+	 *             |                 |                 |              |
+	 *             |                 |                                |
+	 *             |                 |<--   Quantized Delay Time   -->|
+	 *             |                 |                                |
+	 *
+	 *
+	 * We have some issues we must now address:
+	 *
+	 * (1) The *ideal* sample delay time must not be negative. If it is, we
+	 *     jam it to zero.
+	 *
+	 * (2) The *ideal* sample delay time must not be greater than that
+	 *     allowed by the NFC. If it is, we can increase the data setup
+	 *     time, which will reduce the delay between the end of the data
+	 *     setup and the center of the eye. It will also make the eye
+	 *     larger, which might help with the next issue...
+	 *
+	 * (3) The *quantized* sample delay time must not fall either before the
+	 *     eye opens or after it closes (the latter is the problem
+	 *     illustrated in the above figure).
+	 */
+
+	/* Jam a negative ideal sample delay to zero. */
+	if (ideal_sample_delay_in_ns < 0)
+		ideal_sample_delay_in_ns = 0;
+
+	/*
+	 * Extend the data setup as needed to reduce the ideal sample delay
+	 * below the maximum permitted by the NFC.
+	 */
+	while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+
+		/*
+		 * Decrease the ideal sample delay by one half cycle, to keep it
+		 * in the middle of the eye.
+		 */
+		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+		/* Jam a negative ideal sample delay to zero. */
+		if (ideal_sample_delay_in_ns < 0)
+			ideal_sample_delay_in_ns = 0;
+	}
+
+	/*
+	 * Compute the sample delay factor that corresponds to the ideal sample
+	 * delay. If the result is too large, then use the maximum allowed
+	 * value.
+	 *
+	 * Notice that we use the ns_to_cycles function to compute the sample
+	 * delay factor. We do this because the form of the computation is the
+	 * same as that for calculating cycles.
+	 */
+	sample_delay_factor =
+		ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+	if (sample_delay_factor > nfc->max_sample_delay_factor)
+		sample_delay_factor = nfc->max_sample_delay_factor;
+
+	/*
+	 * These macros conveniently encapsulate a computation we'll use to
+	 * continuously evaluate whether or not the data sample delay is inside
+	 * the eye.
+	 */
+	#define IDEAL_DELAY  ((int) ideal_sample_delay_in_ns)
+
+	#define QUANTIZED_DELAY  \
+		((int) ((sample_delay_factor * clock_period_in_ns) >> \
+							dll_delay_shift))
+
+	#define DELAY_ERROR  (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+	#define SAMPLE_IS_NOT_WITHIN_THE_EYE  (DELAY_ERROR > (tEYE >> 1))
+
+	/*
+	 * While the quantized sample time falls outside the eye, reduce the
+	 * sample delay or extend the data setup to move the sampling point back
+	 * toward the eye. Do not allow the number of data setup cycles to
+	 * exceed the maximum allowed by the NFC.
+	 */
+	while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+		/*
+		 * If control arrives here, the quantized sample delay falls
+		 * outside the eye. Check if it's before the eye opens, or after
+		 * the eye closes.
+		 */
+		if (QUANTIZED_DELAY > IDEAL_DELAY) {
+			/*
+			 * If control arrives here, the quantized sample delay
+			 * falls after the eye closes. Decrease the quantized
+			 * delay time and then go back to re-evaluate.
+			 */
+			if (sample_delay_factor != 0)
+				sample_delay_factor--;
+			continue;
+		}
+
+		/*
+		 * If control arrives here, the quantized sample delay falls
+		 * before the eye opens. Shift the sample point by increasing
+		 * data setup time. This will also make the eye larger.
+		 */
+
+		/* Give a cycle to data setup. */
+		data_setup_in_cycles++;
+		/* Synchronize the data setup time with the cycles. */
+		data_setup_in_ns += clock_period_in_ns;
+		/* Adjust tEYE accordingly. */
+		tEYE += clock_period_in_ns;
+
+		/*
+		 * Decrease the ideal sample delay by one half cycle, to keep it
+		 * in the middle of the eye.
+		 */
+		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+		/* ...and one less period for the delay time. */
+		ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+		/* Jam a negative ideal sample delay to zero. */
+		if (ideal_sample_delay_in_ns < 0)
+			ideal_sample_delay_in_ns = 0;
+
+		/*
+		 * We have a new ideal sample delay, so re-compute the quantized
+		 * delay.
+		 */
+		sample_delay_factor =
+			ns_to_cycles(
+				ideal_sample_delay_in_ns << dll_delay_shift,
+							clock_period_in_ns, 0);
+
+		if (sample_delay_factor > nfc->max_sample_delay_factor)
+			sample_delay_factor = nfc->max_sample_delay_factor;
+	}
+
+	/* Control arrives here when we're ready to return our results. */
+return_results:
+	hw->data_setup_in_cycles    = data_setup_in_cycles;
+	hw->data_hold_in_cycles     = data_hold_in_cycles;
+	hw->address_setup_in_cycles = address_setup_in_cycles;
+	hw->use_half_periods        = dll_use_half_periods;
+	hw->sample_delay_factor     = sample_delay_factor;
+
+	/* Return success. */
+	return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	struct timing_threshod *nfc = &timing_default_threshold;
+	unsigned char  *gpmi_regs = r->gpmi_regs;
+	unsigned int   clock_period_in_ns;
+	uint32_t       reg;
+	unsigned int   dll_wait_time_in_us;
+	struct gpmi_nfc_hardware_timing  hw;
+	int ret;
+
+	/* Enable the clock. */
+	ret = clk_enable(r->clock);
+	if (ret) {
+		pr_err("We failed in enable the clk\n");
+		goto err_out;
+	}
+
+	/* set ready/busy timeout */
+	writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT,
+		gpmi_regs + HW_GPMI_TIMING1);
+
+	/* Get the timing information we need. */
+	nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
+	clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
+
+	gpmi_nfc_compute_hardware_timing(this, &hw);
+
+	/* Set up all the simple timing parameters. */
+	reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+		BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles)         |
+		BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles)       ;
+
+	writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+	/*
+	 * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD.
+	 */
+	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* Clear out the DLL control fields. */
+	writel(BM_GPMI_CTRL1_RDN_DELAY,   gpmi_regs + HW_GPMI_CTRL1_CLR);
+	writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+	/* If no sample delay is called for, return immediately. */
+	if (!hw.sample_delay_factor)
+		return;
+
+	/* Configure the HALF_PERIOD flag. */
+	if (hw.use_half_periods)
+		writel(BM_GPMI_CTRL1_HALF_PERIOD,
+						gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Set the delay factor. */
+	writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
+						gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/* Enable the DLL. */
+	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+	/*
+	 * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+	 * we can use the GPMI.
+	 *
+	 * Calculate the amount of time we need to wait, in microseconds.
+	 */
+	dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+	if (!dll_wait_time_in_us)
+		dll_wait_time_in_us = 1;
+
+	/* Wait for the DLL to settle. */
+	udelay(dll_wait_time_in_us);
+
+err_out:
+	return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	clk_disable(r->clock);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+	writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+	struct resources *r = &this->resources;
+	uint32_t mask = 0;
+	uint32_t reg = 0;
+
+	if (GPMI_IS_MX23(this)) {
+		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+	} else if (GPMI_IS_MX28(this)) {
+		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+	} else
+		pr_err("unknow arch.\n");
+	return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+					enum dma_ops_type type)
+{
+	this->last_dma_type = this->dma_type;
+	this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+	struct dma_chan *channel = get_dma_chan(this);
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl;
+	int chip = this->current_chip;
+	u32 pio[3];
+
+	/* [1] send out the PIO words */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+		| BM_GPMI_CTRL0_ADDRESS_INCREMENT
+		| BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+	pio[1] = pio[2] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_err("step 1 error\n");
+		return -1;
+	}
+
+	/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+	sgl = &this->cmd_sgl;
+
+	sg_init_one(sgl, this->cmd_buffer, this->command_length);
+	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel,
+					sgl, 1, DMA_TO_DEVICE, 1);
+	if (!desc) {
+		pr_err("step 2 error\n");
+		return -1;
+	}
+
+	/* [3] submit the DMA */
+	set_dma_type(this, DMA_FOR_COMMAND);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	uint32_t command_mode;
+	uint32_t address;
+	u32 pio[2];
+
+	/* [1] PIO */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_err("step 1 error\n");
+		return -1;
+	}
+
+	/* [2] send DMA request */
+	prepare_data_dma(this, DMA_TO_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+						1, DMA_TO_DEVICE, 1);
+	if (!desc) {
+		pr_err("step 2 error\n");
+		return -1;
+	}
+	/* [3] submit the DMA */
+	set_dma_type(this, DMA_FOR_WRITE_DATA);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[2];
+
+	/* [1] : send PIO */
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_err("step 1 error\n");
+		return -1;
+	}
+
+	/* [2] : send DMA request */
+	prepare_data_dma(this, DMA_FROM_DEVICE);
+	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+						1, DMA_FROM_DEVICE, 1);
+	if (!desc) {
+		pr_err("step 2 error\n");
+		return -1;
+	}
+
+	/* [3] : submit the DMA */
+	set_dma_type(this, DMA_FOR_READ_DATA);
+	return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+			dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[6];
+
+	/* A DMA descriptor that does an ECC page read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+				BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = geo->page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 0);
+	if (!desc) {
+		pr_err("step 2 error\n");
+		return -1;
+	}
+	set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+	return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+				dma_addr_t payload, dma_addr_t auxiliary)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	uint32_t command_mode;
+	uint32_t address;
+	uint32_t ecc_command;
+	uint32_t buffer_mask;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = get_dma_chan(this);
+	int chip = this->current_chip;
+	u32 pio[6];
+
+	/* [1] Wait for the chip to report ready. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(0);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 2, DMA_NONE, 0);
+	if (!desc) {
+		pr_err("step 1 error\n");
+		return -1;
+	}
+
+	/* [2] Enable the BCH block and read. */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+			| BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+	pio[1] = 0;
+	pio[2] =  BM_GPMI_ECCCTRL_ENABLE_ECC
+		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+	pio[3] = geo->page_size;
+	pio[4] = payload;
+	pio[5] = auxiliary;
+	desc = channel->device->device_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_NONE, 1);
+	if (!desc) {
+		pr_err("step 2 error\n");
+		return -1;
+	}
+
+	/* [3] Disable the BCH block */
+	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+		| BM_GPMI_CTRL0_WORD_LENGTH
+		| BF_GPMI_CTRL0_CS(chip, this)
+		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+		| BF_GPMI_CTRL0_ADDRESS(address)
+		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+	pio[1] = 0;
+	desc = channel->device->device_prep_slave_sg(channel,
+				(struct scatterlist *)pio, 2, DMA_NONE, 1);
+	if (!desc) {
+		pr_err("step 3 error\n");
+		return -1;
+	}
+
+	/* [4] submit the DMA */
+	set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+	return start_dma_with_bch_irq(this, desc);
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
new file mode 100644
index 0000000..071b634
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -0,0 +1,1619 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpmi-nand.h"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+	.options	= 0,
+	.offs		= 0,
+	.len		= 1,
+	.pattern	= scan_ff_pattern
+};
+
+/*  We will use all the (page + OOB). */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+	.eccbytes = 0,
+	.eccpos = { 0, },
+	.oobfree = { {.offset = 0, .length = 0} }
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+	struct gpmi_nand_data *this = cookie;
+
+	gpmi_clear_bch(this);
+	complete(&this->bch_done);
+	return IRQ_HANDLED;
+}
+
+/*
+ *  Calculate the ECC strength by hand:
+ *	E : The ECC strength.
+ *	G : the length of Galois Field.
+ *	N : The chunk count of per page.
+ *	O : the oobsize of the NAND chip.
+ *	M : the metasize of per page.
+ *
+ *	The formula is :
+ *		E * G * N
+ *	      ------------ <= (O - M)
+ *                  8
+ *
+ *      So, we get E by:
+ *                    (O - M) * 8
+ *              E <= -------------
+ *                       G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct mtd_info	*mtd = &this->mtd;
+	int ecc_strength;
+
+	ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+			/ (geo->gf_len * geo->ecc_chunk_count);
+
+	/* We need the minor even number. */
+	return round_down(ecc_strength, 2);
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct mtd_info *mtd = &this->mtd;
+	unsigned int metadata_size;
+	unsigned int status_size;
+	unsigned int block_mark_bit_offset;
+
+	/*
+	 * The size of the metadata can be changed, though we set it to 10
+	 * bytes now. But it can't be too large, because we have to save
+	 * enough space for BCH.
+	 */
+	geo->metadata_size = 10;
+
+	/* The default for the length of Galois Field. */
+	geo->gf_len = 13;
+
+	/* The default for chunk size. There is no oobsize greater then 512. */
+	geo->ecc_chunk_size = 512;
+	while (geo->ecc_chunk_size < mtd->oobsize)
+		geo->ecc_chunk_size *= 2; /* keep C >= O */
+
+	geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+	/* We use the same ECC strength for all chunks. */
+	geo->ecc_strength = get_ecc_strength(this);
+	if (!geo->ecc_strength) {
+		pr_err("We get a wrong ECC strength.\n");
+		return -EINVAL;
+	}
+
+	geo->page_size = mtd->writesize + mtd->oobsize;
+	geo->payload_size = mtd->writesize;
+
+	/*
+	 * The auxiliary buffer contains the metadata and the ECC status. The
+	 * metadata is padded to the nearest 32-bit boundary. The ECC status
+	 * contains one byte for every ECC chunk, and is also padded to the
+	 * nearest 32-bit boundary.
+	 */
+	metadata_size = ALIGN(geo->metadata_size, 4);
+	status_size   = ALIGN(geo->ecc_chunk_count, 4);
+
+	geo->auxiliary_size = metadata_size + status_size;
+	geo->auxiliary_status_offset = metadata_size;
+
+	if (!this->swap_block_mark)
+		return 0;
+
+	/*
+	 * We need to compute the byte and bit offsets of
+	 * the physical block mark within the ECC-based view of the page.
+	 *
+	 * NAND chip with 2K page shows below:
+	 *                                             (Block Mark)
+	 *                                                   |      |
+	 *                                                   |  D   |
+	 *                                                   |<---->|
+	 *                                                   V      V
+	 *    +---+----------+-+----------+-+----------+-+----------+-+
+	 *    | M |   data   |E|   data   |E|   data   |E|   data   |E|
+	 *    +---+----------+-+----------+-+----------+-+----------+-+
+	 *
+	 * The position of block mark moves forward in the ECC-based view
+	 * of page, and the delta is:
+	 *
+	 *                   E * G * (N - 1)
+	 *             D = (---------------- + M)
+	 *                          8
+	 *
+	 * With the formula to compute the ECC strength, and the condition
+	 *       : C >= O         (C is the ecc chunk size)
+	 *
+	 * It's easy to deduce to the following result:
+	 *
+	 *         E * G       (O - M)      C - M         C - M
+	 *      ----------- <= ------- <=  --------  <  ---------
+	 *           8            N           N          (N - 1)
+	 *
+	 *  So, we get:
+	 *
+	 *                   E * G * (N - 1)
+	 *             D = (---------------- + M) < C
+	 *                          8
+	 *
+	 *  The above inequality means the position of block mark
+	 *  within the ECC-based view of the page is still in the data chunk,
+	 *  and it's NOT in the ECC bits of the chunk.
+	 *
+	 *  Use the following to compute the bit position of the
+	 *  physical block mark within the ECC-based view of the page:
+	 *          (page_size - D) * 8
+	 *
+	 *  --Huang Shijie
+	 */
+	block_mark_bit_offset = mtd->writesize * 8 -
+		(geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+				+ geo->metadata_size * 8);
+
+	geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+	geo->block_mark_bit_offset  = block_mark_bit_offset % 8;
+	return 0;
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+	int chipnr = this->current_chip;
+
+	return this->dma_chans[chipnr];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+	struct scatterlist *sgl = &this->data_sgl;
+	int ret;
+
+	this->direct_dma_map_ok = true;
+
+	/* first try to map the upper buffer directly */
+	sg_init_one(sgl, this->upper_buf, this->upper_len);
+	ret = dma_map_sg(this->dev, sgl, 1, dr);
+	if (ret == 0) {
+		/* We have to use our own DMA buffer. */
+		sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
+
+		if (dr == DMA_TO_DEVICE)
+			memcpy(this->data_buffer_dma, this->upper_buf,
+				this->upper_len);
+
+		ret = dma_map_sg(this->dev, sgl, 1, dr);
+		if (ret == 0)
+			pr_err("map failed.\n");
+
+		this->direct_dma_map_ok = false;
+	}
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+	struct gpmi_nand_data *this = param;
+	struct completion *dma_c = &this->dma_done;
+
+	complete(dma_c);
+
+	switch (this->dma_type) {
+	case DMA_FOR_COMMAND:
+		dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+		break;
+
+	case DMA_FOR_READ_DATA:
+		dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+		if (this->direct_dma_map_ok == false)
+			memcpy(this->upper_buf, this->data_buffer_dma,
+				this->upper_len);
+		break;
+
+	case DMA_FOR_WRITE_DATA:
+		dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+		break;
+
+	case DMA_FOR_READ_ECC_PAGE:
+	case DMA_FOR_WRITE_ECC_PAGE:
+		/* We have to wait the BCH interrupt to finish. */
+		break;
+
+	default:
+		pr_err("in wrong DMA operation.\n");
+	}
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+				struct dma_async_tx_descriptor *desc)
+{
+	struct completion *dma_c = &this->dma_done;
+	int err;
+
+	init_completion(dma_c);
+
+	desc->callback		= dma_irq_callback;
+	desc->callback_param	= this;
+	dmaengine_submit(desc);
+
+	/* Wait for the interrupt from the DMA block. */
+	err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+	if (!err) {
+		pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+		gpmi_dump_info(this);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ *	[1] firstly the DMA interrupt and
+ *	[2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+			struct dma_async_tx_descriptor *desc)
+{
+	struct completion *bch_c = &this->bch_done;
+	int err;
+
+	/* Prepare to receive an interrupt from the BCH block. */
+	init_completion(bch_c);
+
+	/* start the DMA */
+	start_dma_without_bch_irq(this, desc);
+
+	/* Wait for the interrupt from the BCH block. */
+	err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+	if (!err) {
+		pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+		gpmi_dump_info(this);
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int __devinit
+acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
+{
+	struct platform_device *pdev = this->pdev;
+	struct resources *res = &this->resources;
+	struct resource *r;
+	void *p;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+	if (!r) {
+		pr_err("Can't get resource for %s\n", res_name);
+		return -ENXIO;
+	}
+
+	p = ioremap(r->start, resource_size(r));
+	if (!p) {
+		pr_err("Can't remap %s\n", res_name);
+		return -ENOMEM;
+	}
+
+	if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+		res->gpmi_regs = p;
+	else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+		res->bch_regs = p;
+	else
+		pr_err("unknown resource name : %s\n", res_name);
+
+	return 0;
+}
+
+static void release_register_block(struct gpmi_nand_data *this)
+{
+	struct resources *res = &this->resources;
+	if (res->gpmi_regs)
+		iounmap(res->gpmi_regs);
+	if (res->bch_regs)
+		iounmap(res->bch_regs);
+	res->gpmi_regs = NULL;
+	res->bch_regs = NULL;
+}
+
+static int __devinit
+acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+	struct platform_device *pdev = this->pdev;
+	struct resources *res = &this->resources;
+	const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+	struct resource *r;
+	int err;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+	if (!r) {
+		pr_err("Can't get resource for %s\n", res_name);
+		return -ENXIO;
+	}
+
+	err = request_irq(r->start, irq_h, 0, res_name, this);
+	if (err) {
+		pr_err("Can't own %s\n", res_name);
+		return err;
+	}
+
+	res->bch_low_interrupt = r->start;
+	res->bch_high_interrupt = r->end;
+	return 0;
+}
+
+static void release_bch_irq(struct gpmi_nand_data *this)
+{
+	struct resources *res = &this->resources;
+	int i = res->bch_low_interrupt;
+
+	for (; i <= res->bch_high_interrupt; i++)
+		free_irq(i, this);
+}
+
+static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct gpmi_nand_data *this = param;
+	struct resource *r = this->private;
+
+	if (!mxs_dma_is_apbh(chan))
+		return false;
+	/*
+	 * only catch the GPMI dma channels :
+	 *	for mx23 :	MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
+	 *		(These four channels share the same IRQ!)
+	 *
+	 *	for mx28 :	MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
+	 *		(These eight channels share the same IRQ!)
+	 */
+	if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+		chan->private = &this->dma_data;
+		return true;
+	}
+	return false;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+	unsigned int i;
+	for (i = 0; i < DMA_CHANS; i++)
+		if (this->dma_chans[i]) {
+			dma_release_channel(this->dma_chans[i]);
+			this->dma_chans[i] = NULL;
+		}
+}
+
+static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+{
+	struct platform_device *pdev = this->pdev;
+	struct gpmi_nand_platform_data *pdata = this->pdata;
+	struct resources *res = &this->resources;
+	struct resource *r, *r_dma;
+	unsigned int i;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+					GPMI_NAND_DMA_CHANNELS_RES_NAME);
+	r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+					GPMI_NAND_DMA_INTERRUPT_RES_NAME);
+	if (!r || !r_dma) {
+		pr_err("Can't get resource for DMA\n");
+		return -ENXIO;
+	}
+
+	/* used in gpmi_dma_filter() */
+	this->private = r;
+
+	for (i = r->start; i <= r->end; i++) {
+		struct dma_chan *dma_chan;
+		dma_cap_mask_t mask;
+
+		if (i - r->start >= pdata->max_chip_count)
+			break;
+
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+
+		/* get the DMA interrupt */
+		if (r_dma->start == r_dma->end) {
+			/* only register the first. */
+			if (i == r->start)
+				this->dma_data.chan_irq = r_dma->start;
+			else
+				this->dma_data.chan_irq = NO_IRQ;
+		} else
+			this->dma_data.chan_irq = r_dma->start + (i - r->start);
+
+		dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+		if (!dma_chan)
+			goto acquire_err;
+
+		/* fill the first empty item */
+		this->dma_chans[i - r->start] = dma_chan;
+	}
+
+	res->dma_low_channel = r->start;
+	res->dma_high_channel = i;
+	return 0;
+
+acquire_err:
+	pr_err("Can't acquire DMA channel %u\n", i);
+	release_dma_channels(this);
+	return -EINVAL;
+}
+
+static int __devinit acquire_resources(struct gpmi_nand_data *this)
+{
+	struct resources *res = &this->resources;
+	int ret;
+
+	ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_bch_irq(this, bch_irq);
+	if (ret)
+		goto exit_regs;
+
+	ret = acquire_dma_channels(this);
+	if (ret)
+		goto exit_dma_channels;
+
+	res->clock = clk_get(&this->pdev->dev, NULL);
+	if (IS_ERR(res->clock)) {
+		pr_err("can not get the clock\n");
+		ret = -ENOENT;
+		goto exit_clock;
+	}
+	return 0;
+
+exit_clock:
+	release_dma_channels(this);
+exit_dma_channels:
+	release_bch_irq(this);
+exit_regs:
+	release_register_block(this);
+	return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+	struct resources *r = &this->resources;
+
+	clk_put(r->clock);
+	release_register_block(this);
+	release_bch_irq(this);
+	release_dma_channels(this);
+}
+
+static int __devinit init_hardware(struct gpmi_nand_data *this)
+{
+	int ret;
+
+	/*
+	 * This structure contains the "safe" GPMI timing that should succeed
+	 * with any NAND Flash device
+	 * (although, with less-than-optimal performance).
+	 */
+	struct nand_timing  safe_timing = {
+		.data_setup_in_ns        = 80,
+		.data_hold_in_ns         = 60,
+		.address_setup_in_ns     = 25,
+		.gpmi_sample_delay_in_ns =  6,
+		.tREA_in_ns              = -1,
+		.tRLOH_in_ns             = -1,
+		.tRHOH_in_ns             = -1,
+	};
+
+	/* Initialize the hardwares. */
+	ret = gpmi_init(this);
+	if (ret)
+		return ret;
+
+	this->timing = safe_timing;
+	return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void **use_virt, dma_addr_t *use_phys)
+{
+	struct device *dev = this->dev;
+
+	if (virt_addr_valid(destination)) {
+		dma_addr_t dest_phys;
+
+		dest_phys = dma_map_single(dev, destination,
+						length, DMA_FROM_DEVICE);
+		if (dma_mapping_error(dev, dest_phys)) {
+			if (alt_size < length) {
+				pr_err("Alternate buffer is too small\n");
+				return -ENOMEM;
+			}
+			goto map_failed;
+		}
+		*use_virt = destination;
+		*use_phys = dest_phys;
+		this->direct_dma_map_ok = true;
+		return 0;
+	}
+
+map_failed:
+	*use_virt = alt_virt;
+	*use_phys = alt_phys;
+	this->direct_dma_map_ok = false;
+	return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void *used_virt, dma_addr_t used_phys)
+{
+	if (this->direct_dma_map_ok)
+		dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+			void *destination, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			void *used_virt, dma_addr_t used_phys)
+{
+	if (!this->direct_dma_map_ok)
+		memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+			const void *source, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			const void **use_virt, dma_addr_t *use_phys)
+{
+	struct device *dev = this->dev;
+
+	if (virt_addr_valid(source)) {
+		dma_addr_t source_phys;
+
+		source_phys = dma_map_single(dev, (void *)source, length,
+						DMA_TO_DEVICE);
+		if (dma_mapping_error(dev, source_phys)) {
+			if (alt_size < length) {
+				pr_err("Alternate buffer is too small\n");
+				return -ENOMEM;
+			}
+			goto map_failed;
+		}
+		*use_virt = source;
+		*use_phys = source_phys;
+		return 0;
+	}
+map_failed:
+	/*
+	 * Copy the content of the source buffer into the alternate
+	 * buffer and set up the return values accordingly.
+	 */
+	memcpy(alt_virt, source, length);
+
+	*use_virt = alt_virt;
+	*use_phys = alt_phys;
+	return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+			const void *source, unsigned length,
+			void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+			const void *used_virt, dma_addr_t used_phys)
+{
+	struct device *dev = this->dev;
+	if (used_virt == source)
+		dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+	struct device *dev = this->dev;
+
+	if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+		dma_free_coherent(dev, this->page_buffer_size,
+					this->page_buffer_virt,
+					this->page_buffer_phys);
+	kfree(this->cmd_buffer);
+	kfree(this->data_buffer_dma);
+
+	this->cmd_buffer	= NULL;
+	this->data_buffer_dma	= NULL;
+	this->page_buffer_virt	= NULL;
+	this->page_buffer_size	=  0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+	struct bch_geometry *geo = &this->bch_geometry;
+	struct device *dev = this->dev;
+
+	/* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+	this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA);
+	if (this->cmd_buffer == NULL)
+		goto error_alloc;
+
+	/* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
+	this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA);
+	if (this->data_buffer_dma == NULL)
+		goto error_alloc;
+
+	/*
+	 * [3] Allocate the page buffer.
+	 *
+	 * Both the payload buffer and the auxiliary buffer must appear on
+	 * 32-bit boundaries. We presume the size of the payload buffer is a
+	 * power of two and is much larger than four, which guarantees the
+	 * auxiliary buffer will appear on a 32-bit boundary.
+	 */
+	this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+	this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+					&this->page_buffer_phys, GFP_DMA);
+	if (!this->page_buffer_virt)
+		goto error_alloc;
+
+
+	/* Slice up the page buffer. */
+	this->payload_virt = this->page_buffer_virt;
+	this->payload_phys = this->page_buffer_phys;
+	this->auxiliary_virt = this->payload_virt + geo->payload_size;
+	this->auxiliary_phys = this->payload_phys + geo->payload_size;
+	return 0;
+
+error_alloc:
+	gpmi_free_dma_buffer(this);
+	pr_err("allocate DMA buffer ret!!\n");
+	return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	int ret;
+
+	/*
+	 * Every operation begins with a command byte and a series of zero or
+	 * more address bytes. These are distinguished by either the Address
+	 * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+	 * asserted. When MTD is ready to execute the command, it will deassert
+	 * both latch enables.
+	 *
+	 * Rather than run a separate DMA operation for every single byte, we
+	 * queue them up and run a single DMA operation for the entire series
+	 * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+	 */
+	if ((ctrl & (NAND_ALE | NAND_CLE))) {
+		if (data != NAND_CMD_NONE)
+			this->cmd_buffer[this->command_length++] = data;
+		return;
+	}
+
+	if (!this->command_length)
+		return;
+
+	ret = gpmi_send_command(this);
+	if (ret)
+		pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+
+	this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	if ((this->current_chip < 0) && (chipnr >= 0))
+		gpmi_begin(this);
+	else if ((this->current_chip >= 0) && (chipnr < 0))
+		gpmi_end(this);
+
+	this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	pr_debug("len is %d\n", len);
+	this->upper_buf	= buf;
+	this->upper_len	= len;
+
+	gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+
+	pr_debug("len is %d\n", len);
+	this->upper_buf	= (uint8_t *)buf;
+	this->upper_len	= len;
+
+	gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	uint8_t *buf = this->data_buffer_dma;
+
+	gpmi_read_buf(mtd, buf, 1);
+	return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+				void *payload, void *auxiliary)
+{
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	unsigned char *p;
+	unsigned char *a;
+	unsigned int  bit;
+	unsigned char mask;
+	unsigned char from_data;
+	unsigned char from_oob;
+
+	if (!this->swap_block_mark)
+		return;
+
+	/*
+	 * If control arrives here, we're swapping. Make some convenience
+	 * variables.
+	 */
+	bit = nfc_geo->block_mark_bit_offset;
+	p   = payload + nfc_geo->block_mark_byte_offset;
+	a   = auxiliary;
+
+	/*
+	 * Get the byte from the data area that overlays the block mark. Since
+	 * the ECC engine applies its own view to the bits in the page, the
+	 * physical block mark won't (in general) appear on a byte boundary in
+	 * the data.
+	 */
+	from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+	/* Get the byte from the OOB. */
+	from_oob = a[0];
+
+	/* Swap them. */
+	a[0] = from_data;
+
+	mask = (0x1 << bit) - 1;
+	p[0] = (p[0] & mask) | (from_oob << bit);
+
+	mask = ~0 << bit;
+	p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int page)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	void          *payload_virt;
+	dma_addr_t    payload_phys;
+	void          *auxiliary_virt;
+	dma_addr_t    auxiliary_phys;
+	unsigned int  i;
+	unsigned char *status;
+	unsigned int  failed;
+	unsigned int  corrected;
+	int           ret;
+
+	pr_debug("page number is : %d\n", page);
+	ret = read_page_prepare(this, buf, mtd->writesize,
+					this->payload_virt, this->payload_phys,
+					nfc_geo->payload_size,
+					&payload_virt, &payload_phys);
+	if (ret) {
+		pr_err("Inadequate DMA buffer\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+	auxiliary_virt = this->auxiliary_virt;
+	auxiliary_phys = this->auxiliary_phys;
+
+	/* go! */
+	ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+	read_page_end(this, buf, mtd->writesize,
+			this->payload_virt, this->payload_phys,
+			nfc_geo->payload_size,
+			payload_virt, payload_phys);
+	if (ret) {
+		pr_err("Error in ECC-based read: %d\n", ret);
+		goto exit_nfc;
+	}
+
+	/* handle the block mark swapping */
+	block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+	/* Loop over status bytes, accumulating ECC status. */
+	failed		= 0;
+	corrected	= 0;
+	status		= auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+			continue;
+
+		if (*status == STATUS_UNCORRECTABLE) {
+			failed++;
+			continue;
+		}
+		corrected += *status;
+	}
+
+	/*
+	 * Propagate ECC status to the owning MTD only when failed or
+	 * corrected times nearly reaches our ECC correction threshold.
+	 */
+	if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
+		mtd->ecc_stats.failed    += failed;
+		mtd->ecc_stats.corrected += corrected;
+	}
+
+	/*
+	 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
+	 * details about our policy for delivering the OOB.
+	 *
+	 * We fill the caller's buffer with set bits, and then copy the block
+	 * mark to th caller's buffer. Note that, if block mark swapping was
+	 * necessary, it has already been done, so we can rely on the first
+	 * byte of the auxiliary buffer to contain the block mark.
+	 */
+	memset(chip->oob_poi, ~0, mtd->oobsize);
+	chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+
+	read_page_swap_end(this, buf, mtd->writesize,
+			this->payload_virt, this->payload_phys,
+			nfc_geo->payload_size,
+			payload_virt, payload_phys);
+exit_nfc:
+	return ret;
+}
+
+static void gpmi_ecc_write_page(struct mtd_info *mtd,
+				struct nand_chip *chip, const uint8_t *buf)
+{
+	struct gpmi_nand_data *this = chip->priv;
+	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	const void *payload_virt;
+	dma_addr_t payload_phys;
+	const void *auxiliary_virt;
+	dma_addr_t auxiliary_phys;
+	int        ret;
+
+	pr_debug("ecc write page.\n");
+	if (this->swap_block_mark) {
+		/*
+		 * If control arrives here, we're doing block mark swapping.
+		 * Since we can't modify the caller's buffers, we must copy them
+		 * into our own.
+		 */
+		memcpy(this->payload_virt, buf, mtd->writesize);
+		payload_virt = this->payload_virt;
+		payload_phys = this->payload_phys;
+
+		memcpy(this->auxiliary_virt, chip->oob_poi,
+				nfc_geo->auxiliary_size);
+		auxiliary_virt = this->auxiliary_virt;
+		auxiliary_phys = this->auxiliary_phys;
+
+		/* Handle block mark swapping. */
+		block_mark_swapping(this,
+				(void *) payload_virt, (void *) auxiliary_virt);
+	} else {
+		/*
+		 * If control arrives here, we're not doing block mark swapping,
+		 * so we can to try and use the caller's buffers.
+		 */
+		ret = send_page_prepare(this,
+				buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				&payload_virt, &payload_phys);
+		if (ret) {
+			pr_err("Inadequate payload DMA buffer\n");
+			return;
+		}
+
+		ret = send_page_prepare(this,
+				chip->oob_poi, mtd->oobsize,
+				this->auxiliary_virt, this->auxiliary_phys,
+				nfc_geo->auxiliary_size,
+				&auxiliary_virt, &auxiliary_phys);
+		if (ret) {
+			pr_err("Inadequate auxiliary DMA buffer\n");
+			goto exit_auxiliary;
+		}
+	}
+
+	/* Ask the NFC. */
+	ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+	if (ret)
+		pr_err("Error in ECC-based write: %d\n", ret);
+
+	if (!this->swap_block_mark) {
+		send_page_end(this, chip->oob_poi, mtd->oobsize,
+				this->auxiliary_virt, this->auxiliary_phys,
+				nfc_geo->auxiliary_size,
+				auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+		send_page_end(this, buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				payload_virt, payload_phys);
+	}
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ *    true state of the block mark, no matter where that block mark appears in
+ *    the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ *    allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ *    return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ *    page, using the conventional definition of which bytes are data and which
+ *    are OOB. This gives the caller a way to see the actual, physical bytes
+ *    in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ *                    |           Raw           |         ECC-based       |
+ *       -------------+-------------------------+-------------------------+
+ *                    | Read the conventional   |                         |
+ *                    | OOB at the end of the   |                         |
+ *       Swapping     | page and return it. It  |                         |
+ *                    | contains exactly what   |                         |
+ *                    | we want.                | Read the block mark and |
+ *       -------------+-------------------------+ return it in a buffer   |
+ *                    | Read the conventional   | full of set bits.       |
+ *                    | OOB at the end of the   |                         |
+ *                    | page and also the block |                         |
+ *       Transcribing | mark in the metadata.   |                         |
+ *                    | Copy the block mark     |                         |
+ *                    | into the first byte of  |                         |
+ *                    | the OOB.                |                         |
+ *       -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+				int page, int sndcmd)
+{
+	struct gpmi_nand_data *this = chip->priv;
+
+	pr_debug("page number is %d\n", page);
+	/* clear the OOB buffer */
+	memset(chip->oob_poi, ~0, mtd->oobsize);
+
+	/* Read out the conventional OOB. */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	/*
+	 * Now, we want to make sure the block mark is correct. In the
+	 * Swapping/Raw case, we already have it. Otherwise, we need to
+	 * explicitly read it.
+	 */
+	if (!this->swap_block_mark) {
+		/* Read the block mark into the first byte of the OOB buffer. */
+		chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+		chip->oob_poi[0] = chip->read_byte(mtd);
+	}
+
+	/*
+	 * Return true, indicating that the next call to this function must send
+	 * a command.
+	 */
+	return true;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+	/*
+	 * The BCH will use all the (page + oob).
+	 * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
+	 * But it can not stop some ioctls such MEMWRITEOOB which uses
+	 * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
+	 * these ioctls too.
+	 */
+	return -EPERM;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	int block, ret = 0;
+	uint8_t *block_mark;
+	int column, page, status, chipnr;
+
+	/* Get block number */
+	block = (int)(ofs >> chip->bbt_erase_shift);
+	if (chip->bbt)
+		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+	/* Do we have a flash based bad block table ? */
+	if (chip->options & NAND_BBT_USE_FLASH)
+		ret = nand_update_bbt(mtd, ofs);
+	else {
+		chipnr = (int)(ofs >> chip->chip_shift);
+		chip->select_chip(mtd, chipnr);
+
+		column = this->swap_block_mark ? mtd->writesize : 0;
+
+		/* Write the block mark. */
+		block_mark = this->data_buffer_dma;
+		block_mark[0] = 0; /* bad block marker */
+
+		/* Shift to get page */
+		page = (int)(ofs >> chip->page_shift);
+
+		chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+		chip->write_buf(mtd, block_mark, 1);
+		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+		status = chip->waitfunc(mtd, chip);
+		if (status & NAND_STATUS_FAIL)
+			ret = -EIO;
+
+		chip->select_chip(mtd, -1);
+	}
+	if (!ret)
+		mtd->ecc_stats.badblocks++;
+
+	return ret;
+}
+
+static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+	struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+	/*
+	 * Set the boot block stride size.
+	 *
+	 * In principle, we should be reading this from the OTP bits, since
+	 * that's where the ROM is going to get it. In fact, we don't have any
+	 * way to read the OTP bits, so we go with the default and hope for the
+	 * best.
+	 */
+	geometry->stride_size_in_pages = 64;
+
+	/*
+	 * Set the search area stride exponent.
+	 *
+	 * In principle, we should be reading this from the OTP bits, since
+	 * that's where the ROM is going to get it. In fact, we don't have any
+	 * way to read the OTP bits, so we go with the default and hope for the
+	 * best.
+	 */
+	geometry->search_area_stride_exponent = 2;
+	return 0;
+}
+
+static const char  *fingerprint = "STMP";
+static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+	struct device *dev = this->dev;
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	unsigned int search_area_size_in_strides;
+	unsigned int stride;
+	unsigned int page;
+	loff_t byte;
+	uint8_t *buffer = chip->buffers->databuf;
+	int saved_chip_number;
+	int found_an_ncb_fingerprint = false;
+
+	/* Compute the number of strides in a search area. */
+	search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+	saved_chip_number = this->current_chip;
+	chip->select_chip(mtd, 0);
+
+	/*
+	 * Loop through the first search area, looking for the NCB fingerprint.
+	 */
+	dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+	for (stride = 0; stride < search_area_size_in_strides; stride++) {
+		/* Compute the page and byte addresses. */
+		page = stride * rom_geo->stride_size_in_pages;
+		byte = page   * mtd->writesize;
+
+		dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+		/*
+		 * Read the NCB fingerprint. The fingerprint is four bytes long
+		 * and starts in the 12th byte of the page.
+		 */
+		chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+		chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+		/* Look for the fingerprint. */
+		if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+			found_an_ncb_fingerprint = true;
+			break;
+		}
+
+	}
+
+	chip->select_chip(mtd, saved_chip_number);
+
+	if (found_an_ncb_fingerprint)
+		dev_dbg(dev, "\tFound a fingerprint\n");
+	else
+		dev_dbg(dev, "\tNo fingerprint found\n");
+	return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+	struct device *dev = this->dev;
+	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+	struct mtd_info *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	unsigned int block_size_in_pages;
+	unsigned int search_area_size_in_strides;
+	unsigned int search_area_size_in_pages;
+	unsigned int search_area_size_in_blocks;
+	unsigned int block;
+	unsigned int stride;
+	unsigned int page;
+	loff_t       byte;
+	uint8_t      *buffer = chip->buffers->databuf;
+	int saved_chip_number;
+	int status;
+
+	/* Compute the search area geometry. */
+	block_size_in_pages = mtd->erasesize / mtd->writesize;
+	search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+	search_area_size_in_pages = search_area_size_in_strides *
+					rom_geo->stride_size_in_pages;
+	search_area_size_in_blocks =
+		  (search_area_size_in_pages + (block_size_in_pages - 1)) /
+				    block_size_in_pages;
+
+	dev_dbg(dev, "Search Area Geometry :\n");
+	dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+	dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+	dev_dbg(dev, "\tin Pages  : %u\n", search_area_size_in_pages);
+
+	/* Select chip 0. */
+	saved_chip_number = this->current_chip;
+	chip->select_chip(mtd, 0);
+
+	/* Loop over blocks in the first search area, erasing them. */
+	dev_dbg(dev, "Erasing the search area...\n");
+
+	for (block = 0; block < search_area_size_in_blocks; block++) {
+		/* Compute the page address. */
+		page = block * block_size_in_pages;
+
+		/* Erase this block. */
+		dev_dbg(dev, "\tErasing block 0x%x\n", block);
+		chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+		chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+		/* Wait for the erase to finish. */
+		status = chip->waitfunc(mtd, chip);
+		if (status & NAND_STATUS_FAIL)
+			dev_err(dev, "[%s] Erase failed.\n", __func__);
+	}
+
+	/* Write the NCB fingerprint into the page buffer. */
+	memset(buffer, ~0, mtd->writesize);
+	memset(chip->oob_poi, ~0, mtd->oobsize);
+	memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+	/* Loop through the first search area, writing NCB fingerprints. */
+	dev_dbg(dev, "Writing NCB fingerprints...\n");
+	for (stride = 0; stride < search_area_size_in_strides; stride++) {
+		/* Compute the page and byte addresses. */
+		page = stride * rom_geo->stride_size_in_pages;
+		byte = page   * mtd->writesize;
+
+		/* Write the first page of the current stride. */
+		dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+		chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+		chip->ecc.write_page_raw(mtd, chip, buffer);
+		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+		/* Wait for the write to finish. */
+		status = chip->waitfunc(mtd, chip);
+		if (status & NAND_STATUS_FAIL)
+			dev_err(dev, "[%s] Write failed.\n", __func__);
+	}
+
+	/* Deselect chip 0. */
+	chip->select_chip(mtd, saved_chip_number);
+	return 0;
+}
+
+static int __devinit mx23_boot_init(struct gpmi_nand_data  *this)
+{
+	struct device *dev = this->dev;
+	struct nand_chip *chip = &this->nand;
+	struct mtd_info *mtd = &this->mtd;
+	unsigned int block_count;
+	unsigned int block;
+	int     chipnr;
+	int     page;
+	loff_t  byte;
+	uint8_t block_mark;
+	int     ret = 0;
+
+	/*
+	 * If control arrives here, we can't use block mark swapping, which
+	 * means we're forced to use transcription. First, scan for the
+	 * transcription stamp. If we find it, then we don't have to do
+	 * anything -- the block marks are already transcribed.
+	 */
+	if (mx23_check_transcription_stamp(this))
+		return 0;
+
+	/*
+	 * If control arrives here, we couldn't find a transcription stamp, so
+	 * so we presume the block marks are in the conventional location.
+	 */
+	dev_dbg(dev, "Transcribing bad block marks...\n");
+
+	/* Compute the number of blocks in the entire medium. */
+	block_count = chip->chipsize >> chip->phys_erase_shift;
+
+	/*
+	 * Loop over all the blocks in the medium, transcribing block marks as
+	 * we go.
+	 */
+	for (block = 0; block < block_count; block++) {
+		/*
+		 * Compute the chip, page and byte addresses for this block's
+		 * conventional mark.
+		 */
+		chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+		page = block << (chip->phys_erase_shift - chip->page_shift);
+		byte = block <<  chip->phys_erase_shift;
+
+		/* Send the command to read the conventional block mark. */
+		chip->select_chip(mtd, chipnr);
+		chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+		block_mark = chip->read_byte(mtd);
+		chip->select_chip(mtd, -1);
+
+		/*
+		 * Check if the block is marked bad. If so, we need to mark it
+		 * again, but this time the result will be a mark in the
+		 * location where we transcribe block marks.
+		 */
+		if (block_mark != 0xff) {
+			dev_dbg(dev, "Transcribing mark in block %u\n", block);
+			ret = chip->block_markbad(mtd, byte);
+			if (ret)
+				dev_err(dev, "Failed to mark block bad with "
+							"ret %d\n", ret);
+		}
+	}
+
+	/* Write the stamp that indicates we've transcribed the block marks. */
+	mx23_write_transcription_stamp(this);
+	return 0;
+}
+
+static int __devinit nand_boot_init(struct gpmi_nand_data  *this)
+{
+	nand_boot_set_geometry(this);
+
+	/* This is ROM arch-specific initilization before the BBT scanning. */
+	if (GPMI_IS_MX23(this))
+		return mx23_boot_init(this);
+	return 0;
+}
+
+static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+	int ret;
+
+	/* Free the temporary DMA memory for reading ID. */
+	gpmi_free_dma_buffer(this);
+
+	/* Set up the NFC geometry which is used by BCH. */
+	ret = bch_set_geometry(this);
+	if (ret) {
+		pr_err("set geometry ret : %d\n", ret);
+		return ret;
+	}
+
+	/* Alloc the new DMA buffers according to the pagesize and oobsize */
+	return gpmi_alloc_dma_buffer(this);
+}
+
+static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
+{
+	int ret;
+
+	/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+	if (GPMI_IS_MX23(this))
+		this->swap_block_mark = false;
+	else
+		this->swap_block_mark = true;
+
+	/* Set up the medium geometry */
+	ret = gpmi_set_geometry(this);
+	if (ret)
+		return ret;
+
+	/* NAND boot init, depends on the gpmi_set_geometry(). */
+	return nand_boot_init(this);
+}
+
+static int gpmi_scan_bbt(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct gpmi_nand_data *this = chip->priv;
+	int ret;
+
+	/* Prepare for the BBT scan. */
+	ret = gpmi_pre_bbt_scan(this);
+	if (ret)
+		return ret;
+
+	/* use the default BBT implementation */
+	return nand_default_bbt(mtd);
+}
+
+void gpmi_nfc_exit(struct gpmi_nand_data *this)
+{
+	nand_release(&this->mtd);
+	gpmi_free_dma_buffer(this);
+}
+
+static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+{
+	struct gpmi_nand_platform_data *pdata = this->pdata;
+	struct mtd_info  *mtd = &this->mtd;
+	struct nand_chip *chip = &this->nand;
+	int ret;
+
+	/* init current chip */
+	this->current_chip	= -1;
+
+	/* init the MTD data structures */
+	mtd->priv		= chip;
+	mtd->name		= "gpmi-nand";
+	mtd->owner		= THIS_MODULE;
+
+	/* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+	chip->priv		= this;
+	chip->select_chip	= gpmi_select_chip;
+	chip->cmd_ctrl		= gpmi_cmd_ctrl;
+	chip->dev_ready		= gpmi_dev_ready;
+	chip->read_byte		= gpmi_read_byte;
+	chip->read_buf		= gpmi_read_buf;
+	chip->write_buf		= gpmi_write_buf;
+	chip->ecc.read_page	= gpmi_ecc_read_page;
+	chip->ecc.write_page	= gpmi_ecc_write_page;
+	chip->ecc.read_oob	= gpmi_ecc_read_oob;
+	chip->ecc.write_oob	= gpmi_ecc_write_oob;
+	chip->scan_bbt		= gpmi_scan_bbt;
+	chip->badblock_pattern	= &gpmi_bbt_descr;
+	chip->block_markbad	= gpmi_block_markbad;
+	chip->options		|= NAND_NO_SUBPAGE_WRITE;
+	chip->ecc.mode		= NAND_ECC_HW;
+	chip->ecc.size		= 1;
+	chip->ecc.layout	= &gpmi_hw_ecclayout;
+
+	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
+	this->bch_geometry.payload_size = 1024;
+	this->bch_geometry.auxiliary_size = 128;
+	ret = gpmi_alloc_dma_buffer(this);
+	if (ret)
+		goto err_out;
+
+	ret = nand_scan(mtd, pdata->max_chip_count);
+	if (ret) {
+		pr_err("Chip scan failed\n");
+		goto err_out;
+	}
+
+	ret = mtd_device_parse_register(mtd, NULL, NULL,
+			pdata->partitions, pdata->partition_count);
+	if (ret)
+		goto err_out;
+	return 0;
+
+err_out:
+	gpmi_nfc_exit(this);
+	return ret;
+}
+
+static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+{
+	struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
+	struct gpmi_nand_data *this;
+	int ret;
+
+	this = kzalloc(sizeof(*this), GFP_KERNEL);
+	if (!this) {
+		pr_err("Failed to allocate per-device memory\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, this);
+	this->pdev  = pdev;
+	this->dev   = &pdev->dev;
+	this->pdata = pdata;
+
+	if (pdata->platform_init) {
+		ret = pdata->platform_init();
+		if (ret)
+			goto platform_init_error;
+	}
+
+	ret = acquire_resources(this);
+	if (ret)
+		goto exit_acquire_resources;
+
+	ret = init_hardware(this);
+	if (ret)
+		goto exit_nfc_init;
+
+	ret = gpmi_nfc_init(this);
+	if (ret)
+		goto exit_nfc_init;
+
+	return 0;
+
+exit_nfc_init:
+	release_resources(this);
+platform_init_error:
+exit_acquire_resources:
+	platform_set_drvdata(pdev, NULL);
+	kfree(this);
+	return ret;
+}
+
+static int __exit gpmi_nand_remove(struct platform_device *pdev)
+{
+	struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+	gpmi_nfc_exit(this);
+	release_resources(this);
+	platform_set_drvdata(pdev, NULL);
+	kfree(this);
+	return 0;
+}
+
+static const struct platform_device_id gpmi_ids[] = {
+	{
+		.name = "imx23-gpmi-nand",
+		.driver_data = IS_MX23,
+	}, {
+		.name = "imx28-gpmi-nand",
+		.driver_data = IS_MX28,
+	}, {},
+};
+
+static struct platform_driver gpmi_nand_driver = {
+	.driver = {
+		.name = "gpmi-nand",
+	},
+	.probe   = gpmi_nand_probe,
+	.remove  = __exit_p(gpmi_nand_remove),
+	.id_table = gpmi_ids,
+};
+
+static int __init gpmi_nand_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&gpmi_nand_driver);
+	if (err == 0)
+		printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n");
+	else
+		pr_err("i.MX GPMI NAND driver registration failed\n");
+	return err;
+}
+
+static void __exit gpmi_nand_exit(void)
+{
+	platform_driver_unregister(&gpmi_nand_driver);
+}
+
+module_init(gpmi_nand_init);
+module_exit(gpmi_nand_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
new file mode 100644
index 0000000..e023bcc
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -0,0 +1,273 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+struct resources {
+	void          *gpmi_regs;
+	void          *bch_regs;
+	unsigned int  bch_low_interrupt;
+	unsigned int  bch_high_interrupt;
+	unsigned int  dma_low_channel;
+	unsigned int  dma_high_channel;
+	struct clk    *clock;
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength:             A number that describes the strength of the ECC
+ *                            algorithm.
+ * @page_size:                The size, in bytes, of a physical page, including
+ *                            both data and OOB.
+ * @metadata_size:            The size, in bytes, of the metadata.
+ * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
+ *                            the first chunk in the page includes both data and
+ *                            metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count:          The number of ECC chunks in the page,
+ * @payload_size:             The size, in bytes, of the payload buffer.
+ * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
+ *                            the ECC status appears.
+ * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
+ *                            which the underlying physical block mark appears.
+ * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
+ *                            which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+	unsigned int  gf_len;
+	unsigned int  ecc_strength;
+	unsigned int  page_size;
+	unsigned int  metadata_size;
+	unsigned int  ecc_chunk_size;
+	unsigned int  ecc_chunk_count;
+	unsigned int  payload_size;
+	unsigned int  auxiliary_size;
+	unsigned int  auxiliary_status_offset;
+	unsigned int  block_mark_byte_offset;
+	unsigned int  block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages:        The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ *                               search area in boot block strides.
+ */
+struct boot_rom_geometry {
+	unsigned int  stride_size_in_pages;
+	unsigned int  search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+	DMA_FOR_COMMAND = 1,
+	DMA_FOR_READ_DATA,
+	DMA_FOR_WRITE_DATA,
+	DMA_FOR_READ_ECC_PAGE,
+	DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
+ *                            maximum of tDS and tWP. A negative value
+ *                            indicates this characteristic isn't known.
+ * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
+ *                            maximum of tDH, tWH and tREH. A negative value
+ *                            indicates this characteristic isn't known.
+ * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
+ *                            the maximum of tCLS, tCS and tALS. A negative
+ *                            value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
+ *                            indicates this characteristic isn't known.
+ * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
+ *                            negative value indicates this characteristic isn't
+ *                            known.
+ */
+struct nand_timing {
+	int8_t  data_setup_in_ns;
+	int8_t  data_hold_in_ns;
+	int8_t  address_setup_in_ns;
+	int8_t  gpmi_sample_delay_in_ns;
+	int8_t  tREA_in_ns;
+	int8_t  tRLOH_in_ns;
+	int8_t  tRHOH_in_ns;
+};
+
+struct gpmi_nand_data {
+	/* System Interface */
+	struct device		*dev;
+	struct platform_device	*pdev;
+	struct gpmi_nand_platform_data	*pdata;
+
+	/* Resources */
+	struct resources	resources;
+
+	/* Flash Hardware */
+	struct nand_timing	timing;
+
+	/* BCH */
+	struct bch_geometry	bch_geometry;
+	struct completion	bch_done;
+
+	/* NAND Boot issue */
+	bool			swap_block_mark;
+	struct boot_rom_geometry rom_geometry;
+
+	/* MTD / NAND */
+	struct nand_chip	nand;
+	struct mtd_info		mtd;
+
+	/* General-use Variables */
+	int			current_chip;
+	unsigned int		command_length;
+
+	/* passed from upper layer */
+	uint8_t			*upper_buf;
+	int			upper_len;
+
+	/* for DMA operations */
+	bool			direct_dma_map_ok;
+
+	struct scatterlist	cmd_sgl;
+	char			*cmd_buffer;
+
+	struct scatterlist	data_sgl;
+	char			*data_buffer_dma;
+
+	void			*page_buffer_virt;
+	dma_addr_t		page_buffer_phys;
+	unsigned int		page_buffer_size;
+
+	void			*payload_virt;
+	dma_addr_t		payload_phys;
+
+	void			*auxiliary_virt;
+	dma_addr_t		auxiliary_phys;
+
+	/* DMA channels */
+#define DMA_CHANS		8
+	struct dma_chan		*dma_chans[DMA_CHANS];
+	struct mxs_dma_data	dma_data;
+	enum dma_ops_type	last_dma_type;
+	enum dma_ops_type	dma_type;
+	struct completion	dma_done;
+
+	/* private */
+	void			*private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles:      The data setup time, in cycles.
+ * @data_hold_in_cycles:       The data hold time, in cycles.
+ * @address_setup_in_cycles:   The address setup time, in cycles.
+ * @use_half_periods:          Indicates the clock is running slowly, so the
+ *                             NFC DLL should use half-periods.
+ * @sample_delay_factor:       The sample delay factor.
+ */
+struct gpmi_nfc_hardware_timing {
+	uint8_t  data_setup_in_cycles;
+	uint8_t  data_hold_in_cycles;
+	uint8_t  address_setup_in_cycles;
+	bool     use_half_periods;
+	uint8_t  sample_delay_factor;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles:       The maximum number of data setup cycles that
+ *                               can be expressed in the hardware.
+ * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
+ *                               for data read internal setup. In the Reference
+ *                               Manual, see the chapter "High-Speed NAND
+ *                               Timing" for more details.
+ * @max_sample_delay_factor:     The maximum sample delay factor that can be
+ *                               expressed in the hardware.
+ * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
+ *                               sample delay DLL hardware can possibly work
+ *                               with (the DLL is unusable with longer periods).
+ *                               If the full-cycle period is greater than HALF
+ *                               this value, the DLL must be configured to use
+ *                               half-periods.
+ * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
+ *                               DLL can implement.
+ * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
+ *                               I/O transaction. If no I/O transaction is in
+ *                               progress, this is the clock frequency during
+ *                               the most recent I/O transaction.
+ */
+struct timing_threshod {
+	const unsigned int      max_chip_count;
+	const unsigned int      max_data_setup_cycles;
+	const unsigned int      internal_data_setup_in_ns;
+	const unsigned int      max_sample_delay_factor;
+	const unsigned int      max_dll_clock_period_in_ns;
+	const unsigned int      max_dll_delay_in_ns;
+	unsigned long           clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+				enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+				struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+				struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+			dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+			dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD		0x00
+#define STATUS_ERASED		0xff
+#define STATUS_UNCORRECTABLE	0xfe
+
+/* Use the platform_id to distinguish different Archs. */
+#define IS_MX23			0x1
+#define IS_MX28			0x2
+#define GPMI_IS_MX23(x)		((x)->pdev->id_entry->driver_data == IS_MX23)
+#define GPMI_IS_MX28(x)		((x)->pdev->id_entry->driver_data == IS_MX28)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
new file mode 100644
index 0000000..8343124
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -0,0 +1,172 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0					0x00000000
+#define HW_GPMI_CTRL0_SET				0x00000004
+#define HW_GPMI_CTRL0_CLR				0x00000008
+#define HW_GPMI_CTRL0_TOG				0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE			24
+#define BM_GPMI_CTRL0_COMMAND_MODE	(3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v)	\
+	(((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE		0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ		0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE	0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY	0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH			(1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT		0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT		0x1
+
+/*
+ *  Difference in LOCK_CS between imx23 and imx28 :
+ *  This bit may impact the _POWER_ consumption. So some chips
+ *  do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS			22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS			27
+#define LOCK_CS_ENABLE					0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x)			0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS				20
+#define MX23_BM_GPMI_CTRL0_CS		(3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS		(7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x)		(((v) << BP_GPMI_CTRL0_CS) & \
+						(GPMI_IS_MX23((x)) \
+						? MX23_BM_GPMI_CTRL0_CS	\
+						: MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS				17
+#define BM_GPMI_CTRL0_ADDRESS		(3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v)	\
+		(((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA		0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE			0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE			0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT			(1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED	0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED	0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT			0
+#define BM_GPMI_CTRL0_XFER_COUNT	(0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v)	\
+		(((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE					0x00000010
+
+#define HW_GPMI_ECCCTRL					0x00000020
+#define HW_GPMI_ECCCTRL_SET				0x00000024
+#define HW_GPMI_ECCCTRL_CLR				0x00000028
+#define HW_GPMI_ECCCTRL_TOG				0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD				13
+#define BM_GPMI_ECCCTRL_ECC_CMD		(3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v)	\
+		(((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE		0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE		0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC			(1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE		0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE		0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK			0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	(0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v)	\
+	(((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY	0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE		0x1FF
+
+#define HW_GPMI_ECCCOUNT				0x00000030
+#define HW_GPMI_PAYLOAD					0x00000040
+#define HW_GPMI_AUXILIARY				0x00000050
+#define HW_GPMI_CTRL1					0x00000060
+#define HW_GPMI_CTRL1_SET				0x00000064
+#define HW_GPMI_CTRL1_CLR				0x00000068
+#define HW_GPMI_CTRL1_TOG				0x0000006c
+
+#define BM_GPMI_CTRL1_BCH_MODE				(1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE			17
+#define BM_GPMI_CTRL1_DLL_ENABLE	(1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD			16
+#define BM_GPMI_CTRL1_HALF_PERIOD	(1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY				12
+#define BM_GPMI_CTRL1_RDN_DELAY		(0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v)	\
+		(((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET				(1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED		0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED		0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY		(1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW	0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH	0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE			(1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND			0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA			0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE				(1 << 0)
+
+#define HW_GPMI_TIMING0					0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP			16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	(0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v)	\
+	(((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD			8
+#define BM_GPMI_TIMING0_DATA_HOLD	(0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v)		\
+	(((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP			0
+#define BM_GPMI_TIMING0_DATA_SETUP	(0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v)		\
+	(((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1					0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT			16
+
+#define HW_GPMI_TIMING2					0x00000090
+#define HW_GPMI_DATA					0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT					0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY			24
+#define MX28_BM_GPMI_STAT_READY_BUSY	(0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v)		\
+	(((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG					0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0			28
+#define MX23_BM_GPMI_DEBUG_READY0	(1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 02a03e6..5dc6f0d 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -81,9 +81,6 @@
 static int __init h1910_init(void)
 {
 	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
 	void __iomem *nandaddr;
 
 	if (!machine_is_h1900())
@@ -136,22 +133,10 @@
 		iounmap((void *)nandaddr);
 		return -ENXIO;
 	}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-#endif
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
 
 	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+	mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
+			partition_info, NUM_PARTITIONS);
 
 	/* Return happy */
 	return 0;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 6e813da..e266407 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -251,10 +251,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = {"cmdline", NULL};
-#endif
-
 static int jz_nand_ioremap_resource(struct platform_device *pdev,
 	const char *name, struct resource **res, void __iomem **base)
 {
@@ -299,8 +295,6 @@
 	struct nand_chip *chip;
 	struct mtd_info *mtd;
 	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
-	struct mtd_partition *partition_info;
-	int num_partitions = 0;
 
 	nand = kzalloc(sizeof(*nand), GFP_KERNEL);
 	if (!nand) {
@@ -373,15 +367,9 @@
 		goto err_gpio_free;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-						&partition_info, 0);
-#endif
-	if (num_partitions <= 0 && pdata) {
-		num_partitions = pdata->num_partitions;
-		partition_info = pdata->partitions;
-	}
-	ret = mtd_device_register(mtd, partition_info, num_partitions);
+	ret = mtd_device_parse_register(mtd, NULL, 0,
+			pdata ? pdata->partitions : NULL,
+			pdata ? pdata->num_partitions : 0);
 
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add mtd device\n");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index eb1fbac..5ede647 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -131,8 +131,6 @@
 
 static void mpc5121_nfc_done(struct mtd_info *mtd);
 
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-
 /* Read NFC register */
 static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
 {
@@ -656,13 +654,13 @@
 	struct mpc5121_nfc_prv *prv;
 	struct resource res;
 	struct mtd_info *mtd;
-	struct mtd_partition *parts;
 	struct nand_chip *chip;
 	unsigned long regs_paddr, regs_size;
 	const __be32 *chips_no;
 	int resettime = 0;
 	int retval = 0;
 	int rev, len;
+	struct mtd_part_parser_data ppdata;
 
 	/*
 	 * Check SoC revision. This driver supports only NFC
@@ -727,6 +725,7 @@
 	}
 
 	mtd->name = "MPC5121 NAND";
+	ppdata.of_node = dn;
 	chip->dev_ready = mpc5121_nfc_dev_ready;
 	chip->cmdfunc = mpc5121_nfc_command;
 	chip->read_byte = mpc5121_nfc_read_byte;
@@ -735,7 +734,8 @@
 	chip->write_buf = mpc5121_nfc_write_buf;
 	chip->verify_buf = mpc5121_nfc_verify_buf;
 	chip->select_chip = mpc5121_nfc_select_chip;
-	chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+	chip->options = NAND_NO_AUTOINCR;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
 
 	/* Support external chip-select logic on ADS5121 board */
@@ -837,19 +837,7 @@
 	dev_set_drvdata(dev, mtd);
 
 	/* Register device in MTD */
-	retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
-	if (retval == 0)
-		retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
-	if (retval < 0) {
-		dev_err(dev, "Error parsing MTD partitions!\n");
-		devm_free_irq(dev, prv->irq, mtd);
-		retval = -EINVAL;
-		goto error;
-	}
-
-	retval = mtd_device_register(mtd, parts, retval);
+	retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (retval) {
 		dev_err(dev, "Error adding MTD device!\n");
 		devm_free_irq(dev, prv->irq, mtd);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 90df34c..74a43b8 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -41,7 +41,7 @@
 
 #define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
 #define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2()		cpu_is_mx51()
+#define nfc_is_v3_2()		(cpu_is_mx51() || cpu_is_mx53())
 #define nfc_is_v3()		nfc_is_v3_2()
 
 /* Addresses for NFC registers */
@@ -143,7 +143,6 @@
 struct mxc_nand_host {
 	struct mtd_info		mtd;
 	struct nand_chip	nand;
-	struct mtd_partition	*parts;
 	struct device		*dev;
 
 	void			*spare0;
@@ -350,8 +349,7 @@
 			udelay(1);
 		}
 		if (max_retries < 0)
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
-			      __func__);
+			pr_debug("%s: INT not set\n", __func__);
 	}
 }
 
@@ -371,7 +369,7 @@
  * waits for completion. */
 static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+	pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
 	writew(cmd, NFC_V1_V2_FLASH_CMD);
 	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -387,8 +385,7 @@
 			udelay(1);
 		}
 		if (max_retries < 0)
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
-			      __func__);
+			pr_debug("%s: RESET failed\n", __func__);
 	} else {
 		/* Wait for operation to complete */
 		wait_op_done(host, useirq);
@@ -411,7 +408,7 @@
  * a NAND command. */
 static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+	pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
 
 	writew(addr, NFC_V1_V2_FLASH_ADDR);
 	writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -561,8 +558,7 @@
 	uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
-		DEBUG(MTD_DEBUG_LEVEL0,
-		      "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+		pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
 		return -1;
 	}
 
@@ -849,7 +845,7 @@
 		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
 	} else if (nfc_is_v1()) {
 		writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
-		writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
+		writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
 	} else
 		BUG();
 
@@ -932,8 +928,7 @@
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
 	      command, column, page_addr);
 
 	/* Reset command state information */
@@ -1044,7 +1039,7 @@
 	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct mxc_nand_host *host;
 	struct resource *res;
-	int err = 0, __maybe_unused nr_parts = 0;
+	int err = 0;
 	struct nand_ecclayout *oob_smallpage, *oob_largepage;
 
 	/* Allocate memory for MTD device structure and private data */
@@ -1179,7 +1174,7 @@
 		this->bbt_td = &bbt_main_descr;
 		this->bbt_md = &bbt_mirror_descr;
 		/* update flash based bbt */
-		this->options |= NAND_USE_FLASH_BBT;
+		this->bbt_options |= NAND_BBT_USE_FLASH;
 	}
 
 	init_completion(&host->op_completion);
@@ -1231,16 +1226,8 @@
 	}
 
 	/* Register the partitions */
-	nr_parts =
-	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
-	if (nr_parts > 0)
-		mtd_device_register(mtd, host->parts, nr_parts);
-	else if (pdata->parts)
-		mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
-	else {
-		pr_info("Registering %s as whole device\n", mtd->name);
-		mtd_device_register(mtd, NULL, 0);
-	}
+	mtd_device_parse_register(mtd, part_probes, 0,
+			pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, host);
 
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a46e9bb..3ed9c5e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -21,7 +21,7 @@
  *  TODO:
  *	Enable cached programming for 2k page size chips
  *	Check, if mtd->ecctype should be set to MTD_ECC_HW
- *	if we have HW ecc support.
+ *	if we have HW ECC support.
  *	The AG-AND chips have nice features for speed improvement,
  *	which are not supported yet. Read / program 4 pages in one go.
  *	BBT table is not serialized, has to be fixed
@@ -113,21 +113,19 @@
 
 	/* Start address must align on block boundary */
 	if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+		pr_debug("%s: unaligned address\n", __func__);
 		ret = -EINVAL;
 	}
 
 	/* Length must align on block boundary */
 	if (len & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
-					__func__);
+		pr_debug("%s: length not block aligned\n", __func__);
 		ret = -EINVAL;
 	}
 
 	/* Do not allow past end of device */
 	if (ofs + len > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
-					__func__);
+		pr_debug("%s: past end of device\n", __func__);
 		ret = -EINVAL;
 	}
 
@@ -136,9 +134,9 @@
 
 /**
  * nand_release_device - [GENERIC] release chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
  */
 static void nand_release_device(struct mtd_info *mtd)
 {
@@ -157,9 +155,9 @@
 
 /**
  * nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
  */
 static uint8_t nand_read_byte(struct mtd_info *mtd)
 {
@@ -169,10 +167,11 @@
 
 /**
  * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd:	MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
  *
- * Default read function for 16bit buswith with
- * endianess conversion
+ * Default read function for 16bit buswidth with endianness conversion.
+ *
  */
 static uint8_t nand_read_byte16(struct mtd_info *mtd)
 {
@@ -182,10 +181,9 @@
 
 /**
  * nand_read_word - [DEFAULT] read one word from the chip
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
  */
 static u16 nand_read_word(struct mtd_info *mtd)
 {
@@ -195,8 +193,8 @@
 
 /**
  * nand_select_chip - [DEFAULT] control CE line
- * @mtd:	MTD device structure
- * @chipnr:	chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
  *
  * Default select function for 1 chip devices.
  */
@@ -218,11 +216,11 @@
 
 /**
  * nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd:	MTD device structure
- * @buf:	data buffer
- * @len:	number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
  *
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
  */
 static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
@@ -235,11 +233,11 @@
 
 /**
  * nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd:	MTD device structure
- * @buf:	buffer to store date
- * @len:	number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  *
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
  */
 static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
@@ -252,11 +250,11 @@
 
 /**
  * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
  *
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
  */
 static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
@@ -271,11 +269,11 @@
 
 /**
  * nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd:	MTD device structure
- * @buf:	data buffer
- * @len:	number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
  *
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
  */
 static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
@@ -291,11 +289,11 @@
 
 /**
  * nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd:	MTD device structure
- * @buf:	buffer to store date
- * @len:	number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
  *
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
  */
 static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
 {
@@ -310,11 +308,11 @@
 
 /**
  * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
  *
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
  */
 static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
 {
@@ -332,9 +330,9 @@
 
 /**
  * nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
- * @getchip:	0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
  *
  * Check, if the block is bad.
  */
@@ -344,7 +342,7 @@
 	struct nand_chip *chip = mtd->priv;
 	u16 bad;
 
-	if (chip->options & NAND_BBT_SCANLASTPAGE)
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -384,11 +382,11 @@
 
 /**
  * nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
  *
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver.
 */
 static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -396,7 +394,7 @@
 	uint8_t buf[2] = { 0, 0 };
 	int block, ret, i = 0;
 
-	if (chip->options & NAND_BBT_SCANLASTPAGE)
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	/* Get block number */
@@ -404,33 +402,31 @@
 	if (chip->bbt)
 		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
-	/* Do we have a flash based bad block table ? */
-	if (chip->options & NAND_USE_FLASH_BBT)
+	/* Do we have a flash based bad block table? */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
 		ret = nand_update_bbt(mtd, ofs);
 	else {
+		struct mtd_oob_ops ops;
+
 		nand_get_device(chip, mtd, FL_WRITING);
 
-		/* Write to first two pages and to byte 1 and 6 if necessary.
-		 * If we write to more than one location, the first error
-		 * encountered quits the procedure. We write two bytes per
-		 * location, so we dont have to mess with 16 bit access.
+		/*
+		 * Write to first two pages if necessary. If we write to more
+		 * than one location, the first error encountered quits the
+		 * procedure. We write two bytes per location, so we dont have
+		 * to mess with 16 bit access.
 		 */
+		ops.len = ops.ooblen = 2;
+		ops.datbuf = NULL;
+		ops.oobbuf = buf;
+		ops.ooboffs = chip->badblockpos & ~0x01;
+		ops.mode = MTD_OPS_PLACE_OOB;
 		do {
-			chip->ops.len = chip->ops.ooblen = 2;
-			chip->ops.datbuf = NULL;
-			chip->ops.oobbuf = buf;
-			chip->ops.ooboffs = chip->badblockpos & ~0x01;
+			ret = nand_do_write_oob(mtd, ofs, &ops);
 
-			ret = nand_do_write_oob(mtd, ofs, &chip->ops);
-
-			if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
-				chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
-					& ~0x01;
-				ret = nand_do_write_oob(mtd, ofs, &chip->ops);
-			}
 			i++;
 			ofs += mtd->writesize;
-		} while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+		} while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
 				i < 2);
 
 		nand_release_device(mtd);
@@ -443,16 +439,16 @@
 
 /**
  * nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd:	MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
  *
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
  */
 static int nand_check_wp(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-	/* broken xD cards report WP despite being writable */
+	/* Broken xD cards report WP despite being writable */
 	if (chip->options & NAND_BROKEN_XD)
 		return 0;
 
@@ -463,10 +459,10 @@
 
 /**
  * nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd:	MTD device structure
- * @ofs:	offset from device start
- * @getchip:	0, if the chip is already selected
- * @allowbbt:	1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
  *
  * Check, if the block is bad. Either by reading the bad block table or
  * calling of the scan function.
@@ -485,8 +481,8 @@
 
 /**
  * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd:	MTD device structure
- * @timeo:	Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
  *
  * Helper function for nand_wait_ready used when needing to wait in interrupt
  * context.
@@ -505,10 +501,7 @@
 	}
 }
 
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -519,7 +512,7 @@
 		return panic_nand_wait_ready(mtd, 400);
 
 	led_trigger_event(nand_led_trigger, LED_FULL);
-	/* wait until command is processed or timeout occures */
+	/* Wait until command is processed or timeout occurs */
 	do {
 		if (chip->dev_ready(mtd))
 			break;
@@ -531,13 +524,13 @@
 
 /**
  * nand_command - [DEFAULT] Send command to NAND device
- * @mtd:	MTD device structure
- * @command:	the command to be sent
- * @column:	the column address for this command, -1 if none
- * @page_addr:	the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
  *
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
  */
 static void nand_command(struct mtd_info *mtd, unsigned int command,
 			 int column, int page_addr)
@@ -545,9 +538,7 @@
 	register struct nand_chip *chip = mtd->priv;
 	int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
 
-	/*
-	 * Write out the command to the device.
-	 */
+	/* Write out the command to the device */
 	if (command == NAND_CMD_SEQIN) {
 		int readcmd;
 
@@ -567,9 +558,7 @@
 	}
 	chip->cmd_ctrl(mtd, command, ctrl);
 
-	/*
-	 * Address cycle, when necessary
-	 */
+	/* Address cycle, when necessary */
 	ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
 	/* Serially input address */
 	if (column != -1) {
@@ -590,8 +579,8 @@
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	/*
-	 * program and erase have their own busy handlers
-	 * status and sequential in needs no delay
+	 * Program and erase have their own busy handlers status and sequential
+	 * in needs no delay
 	 */
 	switch (command) {
 
@@ -625,8 +614,10 @@
 			return;
 		}
 	}
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
 	ndelay(100);
 
 	nand_wait_ready(mtd);
@@ -634,14 +625,14 @@
 
 /**
  * nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd:	MTD device structure
- * @command:	the command to be sent
- * @column:	the column address for this command, -1 if none
- * @page_addr:	the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
  *
  * Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices.  We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
  */
 static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			    int column, int page_addr)
@@ -683,8 +674,8 @@
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	/*
-	 * program and erase have their own busy handlers
-	 * status, sequential in, and deplete1 need no delay
+	 * Program and erase have their own busy handlers status, sequential
+	 * in, and deplete1 need no delay.
 	 */
 	switch (command) {
 
@@ -698,14 +689,12 @@
 	case NAND_CMD_DEPLETE1:
 		return;
 
-		/*
-		 * read error status commands require only a short delay
-		 */
 	case NAND_CMD_STATUS_ERROR:
 	case NAND_CMD_STATUS_ERROR0:
 	case NAND_CMD_STATUS_ERROR1:
 	case NAND_CMD_STATUS_ERROR2:
 	case NAND_CMD_STATUS_ERROR3:
+		/* Read error status commands require only a short delay */
 		udelay(chip->chip_delay);
 		return;
 
@@ -739,7 +728,7 @@
 	default:
 		/*
 		 * If we don't have access to the busy pin, we apply the given
-		 * command delay
+		 * command delay.
 		 */
 		if (!chip->dev_ready) {
 			udelay(chip->chip_delay);
@@ -747,8 +736,10 @@
 		}
 	}
 
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
 	ndelay(100);
 
 	nand_wait_ready(mtd);
@@ -756,25 +747,25 @@
 
 /**
  * panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip:	the nand chip descriptor
- * @mtd:	MTD device structure
- * @new_state:	the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
  *
  * Used when in panic, no locks are taken.
  */
 static void panic_nand_get_device(struct nand_chip *chip,
 		      struct mtd_info *mtd, int new_state)
 {
-	/* Hardware controller shared among independend devices */
+	/* Hardware controller shared among independent devices */
 	chip->controller->active = chip;
 	chip->state = new_state;
 }
 
 /**
  * nand_get_device - [GENERIC] Get chip for selected access
- * @chip:	the nand chip descriptor
- * @mtd:	MTD device structure
- * @new_state:	the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
  *
  * Get the device and lock it for exclusive access
  */
@@ -812,10 +803,10 @@
 }
 
 /**
- * panic_nand_wait - [GENERIC]  wait until the command is done
- * @mtd:	MTD device structure
- * @chip:	NAND chip structure
- * @timeo:	Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
  *
  * Wait for command done. This is a helper function for nand_wait used when
  * we are in interrupt context. May happen when in panic and trying to write
@@ -838,13 +829,13 @@
 }
 
 /**
- * nand_wait - [DEFAULT]  wait until the command is done
- * @mtd:	MTD device structure
- * @chip:	NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
  *
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
  */
 static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
@@ -859,8 +850,10 @@
 
 	led_trigger_event(nand_led_trigger, LED_FULL);
 
-	/* Apply this short delay always to ensure that we do wait tWB in
-	 * any case on any machine. */
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in any
+	 * case on any machine.
+	 */
 	ndelay(100);
 
 	if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
@@ -890,16 +883,15 @@
 
 /**
  * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
  * @mtd: mtd info
  * @ofs: offset to start unlock from
  * @len: length to unlock
- * @invert:   when = 0, unlock the range of blocks within the lower and
- *                      upper boundary address
- *            when = 1, unlock the range of blocks outside the boundaries
- *                      of the lower and upper boundary address
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ *                    upper boundary address
+ *          when = 1, unlock the range of blocks outside the boundaries
+ *                    of the lower and upper boundary address
  *
- * return - unlock status
+ * Returs unlock status.
  */
 static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
 					uint64_t len, int invert)
@@ -919,10 +911,9 @@
 
 	/* Call wait ready function */
 	status = chip->waitfunc(mtd, chip);
-	udelay(1000);
 	/* See if device thinks it succeeded */
 	if (status & 0x01) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+		pr_debug("%s: error status = 0x%08x\n",
 					__func__, status);
 		ret = -EIO;
 	}
@@ -932,12 +923,11 @@
 
 /**
  * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
  * @mtd: mtd info
  * @ofs: offset to start unlock from
  * @len: length to unlock
  *
- * return - unlock status
+ * Returns unlock status.
  */
 int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -945,7 +935,7 @@
 	int chipnr;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
@@ -964,7 +954,7 @@
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+		pr_debug("%s: device is write protected!\n",
 					__func__);
 		ret = -EIO;
 		goto out;
@@ -981,18 +971,16 @@
 
 /**
  * nand_lock - [REPLACEABLE] locks all blocks present in the device
- *
  * @mtd: mtd info
  * @ofs: offset to start unlock from
  * @len: length to unlock
  *
- * return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
  *
- * This feature is not supported in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks, not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
  */
 int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
@@ -1000,7 +988,7 @@
 	int chipnr, status, page;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
 			__func__, (unsigned long long)ofs, len);
 
 	if (check_offs_len(mtd, ofs, len))
@@ -1015,7 +1003,7 @@
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+		pr_debug("%s: device is write protected!\n",
 					__func__);
 		status = MTD_ERASE_FAILED;
 		ret = -EIO;
@@ -1028,10 +1016,9 @@
 
 	/* Call wait ready function */
 	status = chip->waitfunc(mtd, chip);
-	udelay(1000);
 	/* See if device thinks it succeeded */
 	if (status & 0x01) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+		pr_debug("%s: error status = 0x%08x\n",
 					__func__, status);
 		ret = -EIO;
 		goto out;
@@ -1047,13 +1034,13 @@
 EXPORT_SYMBOL(nand_lock);
 
 /**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  *
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 			      uint8_t *buf, int page)
@@ -1064,11 +1051,11 @@
 }
 
 /**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  *
  * We need a special oob layout and handling even when OOB isn't used.
  */
@@ -1107,11 +1094,11 @@
 }
 
 /**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  */
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int page)
@@ -1148,12 +1135,12 @@
 }
 
 /**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @data_offs:	offset of requested data within the page
- * @readlen:	data length
- * @bufpoi:	buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
  */
 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
@@ -1166,12 +1153,12 @@
 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
 	int index = 0;
 
-	/* Column address wihin the page aligned to ECC size (256bytes). */
+	/* Column address within the page aligned to ECC size (256bytes) */
 	start_step = data_offs / chip->ecc.size;
 	end_step = (data_offs + readlen - 1) / chip->ecc.size;
 	num_steps = end_step - start_step + 1;
 
-	/* Data size aligned to ECC ecc.size*/
+	/* Data size aligned to ECC ecc.size */
 	datafrag_len = num_steps * chip->ecc.size;
 	eccfrag_len = num_steps * chip->ecc.bytes;
 
@@ -1183,13 +1170,14 @@
 	p = bufpoi + data_col_addr;
 	chip->read_buf(mtd, p, datafrag_len);
 
-	/* Calculate  ECC */
+	/* Calculate ECC */
 	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
 		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
 
-	/* The performance is faster if to position offsets
-	   according to ecc.pos. Let make sure here that
-	   there are no gaps in ecc positions */
+	/*
+	 * The performance is faster if we position offsets according to
+	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+	 */
 	for (i = 0; i < eccfrag_len - 1; i++) {
 		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
 			eccpos[i + start_step * chip->ecc.bytes + 1]) {
@@ -1201,8 +1189,10 @@
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
 		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
 	} else {
-		/* send the command to read the particular ecc bytes */
-		/* take care about buswidth alignment in read_buf */
+		/*
+		 * Send the command to read the particular ECC bytes take care
+		 * about buswidth alignment in read_buf.
+		 */
 		index = start_step * chip->ecc.bytes;
 
 		aligned_pos = eccpos[index] & ~(busw - 1);
@@ -1235,13 +1225,13 @@
 }
 
 /**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  *
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
  */
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int page)
@@ -1280,18 +1270,17 @@
 }
 
 /**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  *
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
  */
 static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
 	struct nand_chip *chip, uint8_t *buf, int page)
@@ -1329,14 +1318,14 @@
 }
 
 /**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @page:	page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
  *
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
  */
 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 				   uint8_t *buf, int page)
@@ -1384,29 +1373,29 @@
 }
 
 /**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip:	nand chip structure
- * @oob:	oob destination address
- * @ops:	oob ops structure
- * @len:	size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
  */
 static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
 				  struct mtd_oob_ops *ops, size_t len)
 {
 	switch (ops->mode) {
 
-	case MTD_OOB_PLACE:
-	case MTD_OOB_RAW:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
 		memcpy(oob, chip->oob_poi + ops->ooboffs, len);
 		return oob + len;
 
-	case MTD_OOB_AUTO: {
+	case MTD_OPS_AUTO_OOB: {
 		struct nand_oobfree *free = chip->ecc.layout->oobfree;
 		uint32_t boffs = 0, roffs = ops->ooboffs;
 		size_t bytes = 0;
 
 		for (; free->length && len; free++, len -= bytes) {
-			/* Read request not from offset 0 ? */
+			/* Read request not from offset 0? */
 			if (unlikely(roffs)) {
 				if (roffs >= free->length) {
 					roffs -= free->length;
@@ -1432,11 +1421,10 @@
 }
 
 /**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
  *
  * Internal function. Called with chip held.
  */
@@ -1451,7 +1439,7 @@
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
-	uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+	uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
 		mtd->oobavail : mtd->oobsize;
 
 	uint8_t *bufpoi, *oob, *buf;
@@ -1473,7 +1461,7 @@
 		bytes = min(mtd->writesize - col, readlen);
 		aligned = (bytes == mtd->writesize);
 
-		/* Is the current page in the buffer ? */
+		/* Is the current page in the buffer? */
 		if (realpage != chip->pagebuf || oob) {
 			bufpoi = aligned ? buf : chip->buffers->databuf;
 
@@ -1483,7 +1471,7 @@
 			}
 
 			/* Now read the page into the buffer */
-			if (unlikely(ops->mode == MTD_OOB_RAW))
+			if (unlikely(ops->mode == MTD_OPS_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip,
 							      bufpoi, page);
 			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
@@ -1492,14 +1480,22 @@
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
 							  page);
-			if (ret < 0)
+			if (ret < 0) {
+				if (!aligned)
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
 				break;
+			}
 
 			/* Transfer not aligned data */
 			if (!aligned) {
 				if (!NAND_SUBPAGE_READ(chip) && !oob &&
-				    !(mtd->ecc_stats.failed - stats.failed))
+				    !(mtd->ecc_stats.failed - stats.failed) &&
+				    (ops->mode != MTD_OPS_RAW))
 					chip->pagebuf = realpage;
+				else
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
@@ -1539,7 +1535,7 @@
 		if (!readlen)
 			break;
 
-		/* For subsequent reads align to page boundary. */
+		/* For subsequent reads align to page boundary */
 		col = 0;
 		/* Increment page address */
 		realpage++;
@@ -1552,8 +1548,9 @@
 			chip->select_chip(mtd, chipnr);
 		}
 
-		/* Check, if the chip supports auto page increment
-		 * or if we have hit a block boundary.
+		/*
+		 * Check, if the chip supports auto page increment or if we
+		 * have hit a block boundary.
 		 */
 		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
 			sndcmd = 1;
@@ -1574,18 +1571,19 @@
 
 /**
  * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @len:	number of bytes to read
- * @retlen:	pointer to variable to store the number of read bytes
- * @buf:	the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
  *
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
  */
 static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, uint8_t *buf)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
 	/* Do not allow reads past end of device */
@@ -1596,13 +1594,14 @@
 
 	nand_get_device(chip, mtd, FL_READING);
 
-	chip->ops.len = len;
-	chip->ops.datbuf = buf;
-	chip->ops.oobbuf = NULL;
+	ops.len = len;
+	ops.datbuf = buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
 
-	ret = nand_do_read_ops(mtd, from, &chip->ops);
+	ret = nand_do_read_ops(mtd, from, &ops);
 
-	*retlen = chip->ops.retlen;
+	*retlen = ops.retlen;
 
 	nand_release_device(mtd);
 
@@ -1610,11 +1609,11 @@
 }
 
 /**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to read
- * @sndcmd:	flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
  */
 static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 			     int page, int sndcmd)
@@ -1628,12 +1627,12 @@
 }
 
 /**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
  *			    with syndromes
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to read
- * @sndcmd:	flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
  */
 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 				  int page, int sndcmd)
@@ -1667,10 +1666,10 @@
 }
 
 /**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
  */
 static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
 			      int page)
@@ -1690,11 +1689,11 @@
 }
 
 /**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- *			     with syndrome - only for large page flash !
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @page:	page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ *			     with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
  */
 static int nand_write_oob_syndrome(struct mtd_info *mtd,
 				   struct nand_chip *chip, int page)
@@ -1749,34 +1748,37 @@
 }
 
 /**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
  *
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
  */
 static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 			    struct mtd_oob_ops *ops)
 {
 	int page, realpage, chipnr, sndcmd = 1;
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_ecc_stats stats;
 	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
 	int readlen = ops->ooblen;
 	int len;
 	uint8_t *buf = ops->oobbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	stats = mtd->ecc_stats;
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		len = chip->ecc.layout->oobavail;
 	else
 		len = mtd->oobsize;
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
-					"outside oob\n", __func__);
+		pr_debug("%s: attempt to start read outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1784,8 +1786,8 @@
 	if (unlikely(from >= mtd->size ||
 		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
 					(from >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
-					"of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -1797,7 +1799,10 @@
 	page = realpage & chip->pagemask;
 
 	while (1) {
-		sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+		if (ops->mode == MTD_OPS_RAW)
+			sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+		else
+			sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
 
 		len = min(len, readlen);
 		buf = nand_transfer_oob(chip, buf, ops, len);
@@ -1830,24 +1835,29 @@
 			chip->select_chip(mtd, chipnr);
 		}
 
-		/* Check, if the chip supports auto page increment
-		 * or if we have hit a block boundary.
+		/*
+		 * Check, if the chip supports auto page increment or if we
+		 * have hit a block boundary.
 		 */
 		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
 			sndcmd = 1;
 	}
 
 	ops->oobretlen = ops->ooblen;
-	return 0;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
 }
 
 /**
  * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd:	MTD device structure
- * @from:	offset to read from
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
  *
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
  */
 static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops)
@@ -1859,17 +1869,17 @@
 
 	/* Do not allow reads past end of device */
 	if (ops->datbuf && (from + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
-				"beyond end of device\n", __func__);
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
 	nand_get_device(chip, mtd, FL_READING);
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
-	case MTD_OOB_RAW:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
 		break;
 
 	default:
@@ -1888,12 +1898,12 @@
 
 
 /**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
  *
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
  */
 static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 				const uint8_t *buf)
@@ -1903,10 +1913,10 @@
 }
 
 /**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
  *
  * We need a special oob layout and handling even when ECC isn't checked.
  */
@@ -1942,10 +1952,10 @@
 		chip->write_buf(mtd, oob, size);
 }
 /**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
  */
 static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 				  const uint8_t *buf)
@@ -1957,7 +1967,7 @@
 	const uint8_t *p = buf;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
-	/* Software ecc calculation */
+	/* Software ECC calculation */
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
@@ -1968,10 +1978,10 @@
 }
 
 /**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
  */
 static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				  const uint8_t *buf)
@@ -1996,13 +2006,13 @@
 }
 
 /**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
  *
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
  */
 static void nand_write_page_syndrome(struct mtd_info *mtd,
 				    struct nand_chip *chip, const uint8_t *buf)
@@ -2041,12 +2051,12 @@
 
 /**
  * nand_write_page - [REPLACEABLE] write one page
- * @mtd:	MTD device structure
- * @chip:	NAND chip descriptor
- * @buf:	the data to write
- * @page:	page number to write
- * @cached:	cached programming
- * @raw:	use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
  */
 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 			   const uint8_t *buf, int page, int cached, int raw)
@@ -2061,8 +2071,8 @@
 		chip->ecc.write_page(mtd, chip, buf);
 
 	/*
-	 * Cached progamming disabled for now, Not sure if its worth the
-	 * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+	 * Cached progamming disabled for now. Not sure if it's worth the
+	 * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
 	 */
 	cached = 0;
 
@@ -2072,7 +2082,7 @@
 		status = chip->waitfunc(mtd, chip);
 		/*
 		 * See if operation failed and additional status checks are
-		 * available
+		 * available.
 		 */
 		if ((status & NAND_STATUS_FAIL) && (chip->errstat))
 			status = chip->errstat(mtd, chip, FL_WRITING, status,
@@ -2096,29 +2106,37 @@
 }
 
 /**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip:	nand chip structure
- * @oob:	oob data buffer
- * @len:	oob data write length
- * @ops:	oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
  */
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
-						struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+			      struct mtd_oob_ops *ops)
 {
+	struct nand_chip *chip = mtd->priv;
+
+	/*
+	 * Initialise to all 0xFF, to avoid the possibility of left over OOB
+	 * data from a previous OOB read.
+	 */
+	memset(chip->oob_poi, 0xff, mtd->oobsize);
+
 	switch (ops->mode) {
 
-	case MTD_OOB_PLACE:
-	case MTD_OOB_RAW:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
 		memcpy(chip->oob_poi + ops->ooboffs, oob, len);
 		return oob + len;
 
-	case MTD_OOB_AUTO: {
+	case MTD_OPS_AUTO_OOB: {
 		struct nand_oobfree *free = chip->ecc.layout->oobfree;
 		uint32_t boffs = 0, woffs = ops->ooboffs;
 		size_t bytes = 0;
 
 		for (; free->length && len; free++, len -= bytes) {
-			/* Write request not from offset 0 ? */
+			/* Write request not from offset 0? */
 			if (unlikely(woffs)) {
 				if (woffs >= free->length) {
 					woffs -= free->length;
@@ -2146,12 +2164,12 @@
 #define NOTALIGNED(x)	((x & (chip->subpagesize - 1)) != 0)
 
 /**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
  *
- * NAND write with ECC
+ * NAND write with ECC.
  */
 static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
@@ -2161,7 +2179,7 @@
 	uint32_t writelen = ops->len;
 
 	uint32_t oobwritelen = ops->ooblen;
-	uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+	uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
 				mtd->oobavail : mtd->oobsize;
 
 	uint8_t *oob = ops->oobbuf;
@@ -2172,10 +2190,10 @@
 	if (!writelen)
 		return 0;
 
-	/* reject writes, which are not page aligned */
+	/* Reject writes, which are not page aligned */
 	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-		printk(KERN_NOTICE "%s: Attempt to write not "
-				"page aligned data\n", __func__);
+		pr_notice("%s: attempt to write non page aligned data\n",
+			   __func__);
 		return -EINVAL;
 	}
 
@@ -2201,10 +2219,6 @@
 	    (chip->pagebuf << chip->page_shift) < (to + ops->len))
 		chip->pagebuf = -1;
 
-	/* If we're not given explicit OOB data, let it be 0xFF */
-	if (likely(!oob))
-		memset(chip->oob_poi, 0xff, mtd->oobsize);
-
 	/* Don't allow multipage oob writes with offset */
 	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
 		return -EINVAL;
@@ -2214,7 +2228,7 @@
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
 
-		/* Partial page write ? */
+		/* Partial page write? */
 		if (unlikely(column || writelen < (mtd->writesize - 1))) {
 			cached = 0;
 			bytes = min_t(int, bytes - column, (int) writelen);
@@ -2226,12 +2240,15 @@
 
 		if (unlikely(oob)) {
 			size_t len = min(oobwritelen, oobmaxlen);
-			oob = nand_fill_oob(chip, oob, len, ops);
+			oob = nand_fill_oob(mtd, oob, len, ops);
 			oobwritelen -= len;
+		} else {
+			/* We still need to erase leftover OOB data */
+			memset(chip->oob_poi, 0xff, mtd->oobsize);
 		}
 
 		ret = chip->write_page(mtd, chip, wbuf, page, cached,
-				       (ops->mode == MTD_OOB_RAW));
+				       (ops->mode == MTD_OPS_RAW));
 		if (ret)
 			break;
 
@@ -2260,11 +2277,11 @@
 
 /**
  * panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @len:	number of bytes to write
- * @retlen:	pointer to variable to store the number of written bytes
- * @buf:	the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
  *
  * NAND write with ECC. Used when performing writes in interrupt context, this
  * may for example be called by mtdoops when writing an oops while in panic.
@@ -2273,6 +2290,7 @@
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
 	/* Do not allow reads past end of device */
@@ -2281,36 +2299,38 @@
 	if (!len)
 		return 0;
 
-	/* Wait for the device to get ready.  */
+	/* Wait for the device to get ready */
 	panic_nand_wait(mtd, chip, 400);
 
-	/* Grab the device.  */
+	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
-	chip->ops.len = len;
-	chip->ops.datbuf = (uint8_t *)buf;
-	chip->ops.oobbuf = NULL;
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
 
-	ret = nand_do_write_ops(mtd, to, &chip->ops);
+	ret = nand_do_write_ops(mtd, to, &ops);
 
-	*retlen = chip->ops.retlen;
+	*retlen = ops.retlen;
 	return ret;
 }
 
 /**
  * nand_write - [MTD Interface] NAND write with ECC
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @len:	number of bytes to write
- * @retlen:	pointer to variable to store the number of written bytes
- * @buf:	the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
  *
- * NAND write with ECC
+ * NAND write with ECC.
  */
 static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			  size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
 	int ret;
 
 	/* Do not allow reads past end of device */
@@ -2321,13 +2341,14 @@
 
 	nand_get_device(chip, mtd, FL_WRITING);
 
-	chip->ops.len = len;
-	chip->ops.datbuf = (uint8_t *)buf;
-	chip->ops.oobbuf = NULL;
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
 
-	ret = nand_do_write_ops(mtd, to, &chip->ops);
+	ret = nand_do_write_ops(mtd, to, &ops);
 
-	*retlen = chip->ops.retlen;
+	*retlen = ops.retlen;
 
 	nand_release_device(mtd);
 
@@ -2336,11 +2357,11 @@
 
 /**
  * nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
  *
- * NAND write out-of-band
+ * NAND write out-of-band.
  */
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
@@ -2348,24 +2369,24 @@
 	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+	pr_debug("%s: to = 0x%08x, len = %i\n",
 			 __func__, (unsigned int)to, (int)ops->ooblen);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		len = chip->ecc.layout->oobavail;
 	else
 		len = mtd->oobsize;
 
 	/* Do not allow write past end of page */
 	if ((ops->ooboffs + ops->ooblen) > len) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
-				"past end of page\n", __func__);
+		pr_debug("%s: attempt to write past end of page\n",
+				__func__);
 		return -EINVAL;
 	}
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
-				"write outside oob\n", __func__);
+		pr_debug("%s: attempt to start write outside oob\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -2374,8 +2395,8 @@
 		     ops->ooboffs + ops->ooblen >
 			((mtd->size >> chip->page_shift) -
 			 (to >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
@@ -2401,10 +2422,12 @@
 	if (page == chip->pagebuf)
 		chip->pagebuf = -1;
 
-	memset(chip->oob_poi, 0xff, mtd->oobsize);
-	nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
-	status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
-	memset(chip->oob_poi, 0xff, mtd->oobsize);
+	nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+	if (ops->mode == MTD_OPS_RAW)
+		status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+	else
+		status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
 
 	if (status)
 		return status;
@@ -2416,9 +2439,9 @@
 
 /**
  * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd:	MTD device structure
- * @to:		offset to write to
- * @ops:	oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
  */
 static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 			  struct mtd_oob_ops *ops)
@@ -2430,17 +2453,17 @@
 
 	/* Do not allow writes past end of device */
 	if (ops->datbuf && (to + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
-				"end of device\n", __func__);
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
 		return -EINVAL;
 	}
 
 	nand_get_device(chip, mtd, FL_WRITING);
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
-	case MTD_OOB_RAW:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
 		break;
 
 	default:
@@ -2458,11 +2481,11 @@
 }
 
 /**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd:	MTD device structure
- * @page:	the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
  *
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
  */
 static void single_erase_cmd(struct mtd_info *mtd, int page)
 {
@@ -2473,12 +2496,11 @@
 }
 
 /**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd:	MTD device structure
- * @page:	the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
  *
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
  */
 static void multi_erase_cmd(struct mtd_info *mtd, int page)
 {
@@ -2493,10 +2515,10 @@
 
 /**
  * nand_erase - [MTD Interface] erase block(s)
- * @mtd:	MTD device structure
- * @instr:	erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
  *
- * Erase one ore more blocks
+ * Erase one ore more blocks.
  */
 static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
@@ -2505,12 +2527,12 @@
 
 #define BBT_PAGE_MASK	0xffffff3f
 /**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd:	MTD device structure
- * @instr:	erase instruction
- * @allowbbt:	allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
  *
- * Erase one ore more blocks
+ * Erase one ore more blocks.
  */
 int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		    int allowbbt)
@@ -2521,9 +2543,9 @@
 	unsigned int bbt_masked_page = 0xffffffff;
 	loff_t len;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
-				__func__, (unsigned long long)instr->addr,
-				(unsigned long long)instr->len);
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
 
 	if (check_offs_len(mtd, instr->addr, instr->len))
 		return -EINVAL;
@@ -2545,8 +2567,8 @@
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
-					__func__);
+		pr_debug("%s: device is write protected!\n",
+				__func__);
 		instr->state = MTD_ERASE_FAILED;
 		goto erase_exit;
 	}
@@ -2555,7 +2577,7 @@
 	 * If BBT requires refresh, set the BBT page mask to see if the BBT
 	 * should be rewritten. Otherwise the mask is set to 0xffffffff which
 	 * can not be matched. This is also done when the bbt is actually
-	 * erased to avoid recusrsive updates
+	 * erased to avoid recursive updates.
 	 */
 	if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
 		bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
@@ -2566,20 +2588,18 @@
 	instr->state = MTD_ERASING;
 
 	while (len) {
-		/*
-		 * heck if we have a bad block, we do not erase bad blocks !
-		 */
+		/* Heck if we have a bad block, we do not erase bad blocks! */
 		if (nand_block_checkbad(mtd, ((loff_t) page) <<
 					chip->page_shift, 0, allowbbt)) {
-			printk(KERN_WARNING "%s: attempt to erase a bad block "
-					"at page 0x%08x\n", __func__, page);
+			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+				    __func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			goto erase_exit;
 		}
 
 		/*
 		 * Invalidate the page cache, if we erase the block which
-		 * contains the current cached page
+		 * contains the current cached page.
 		 */
 		if (page <= chip->pagebuf && chip->pagebuf <
 		    (page + pages_per_block))
@@ -2599,8 +2619,8 @@
 
 		/* See if block erase succeeded */
 		if (status & NAND_STATUS_FAIL) {
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
-					"page 0x%08x\n", __func__, page);
+			pr_debug("%s: failed erase, page 0x%08x\n",
+					__func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
@@ -2609,7 +2629,7 @@
 
 		/*
 		 * If BBT requires refresh, set the BBT rewrite flag to the
-		 * page being erased
+		 * page being erased.
 		 */
 		if (bbt_masked_page != 0xffffffff &&
 		    (page & BBT_PAGE_MASK) == bbt_masked_page)
@@ -2628,7 +2648,7 @@
 
 			/*
 			 * If BBT requires refresh and BBT-PERCHIP, set the BBT
-			 * page mask to see if this BBT should be rewritten
+			 * page mask to see if this BBT should be rewritten.
 			 */
 			if (bbt_masked_page != 0xffffffff &&
 			    (chip->bbt_td->options & NAND_BBT_PERCHIP))
@@ -2651,7 +2671,7 @@
 
 	/*
 	 * If BBT requires refresh and erase was successful, rewrite any
-	 * selected bad block tables
+	 * selected bad block tables.
 	 */
 	if (bbt_masked_page == 0xffffffff || ret)
 		return ret;
@@ -2659,10 +2679,10 @@
 	for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
 		if (!rewrite_bbt[chipnr])
 			continue;
-		/* update the BBT for chip */
-		DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
-			"(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
-			rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
+		/* Update the BBT for chip */
+		pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+				__func__, chipnr, rewrite_bbt[chipnr],
+				chip->bbt_td->pages[chipnr]);
 		nand_update_bbt(mtd, rewrite_bbt[chipnr]);
 	}
 
@@ -2672,15 +2692,15 @@
 
 /**
  * nand_sync - [MTD Interface] sync
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
  */
 static void nand_sync(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
 	nand_get_device(chip, mtd, FL_SYNCING);
@@ -2690,8 +2710,8 @@
 
 /**
  * nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd:	MTD device structure
- * @offs:	offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
  */
 static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
 {
@@ -2704,8 +2724,8 @@
 
 /**
  * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd:	MTD device structure
- * @ofs:	offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
  */
 static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
@@ -2714,7 +2734,7 @@
 
 	ret = nand_block_isbad(mtd, ofs);
 	if (ret) {
-		/* If it was bad already, return success and do nothing. */
+		/* If it was bad already, return success and do nothing */
 		if (ret > 0)
 			return 0;
 		return ret;
@@ -2725,7 +2745,7 @@
 
 /**
  * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  */
 static int nand_suspend(struct mtd_info *mtd)
 {
@@ -2736,7 +2756,7 @@
 
 /**
  * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  */
 static void nand_resume(struct mtd_info *mtd)
 {
@@ -2745,13 +2765,11 @@
 	if (chip->state == FL_PM_SUSPENDED)
 		nand_release_device(mtd);
 	else
-		printk(KERN_ERR "%s called for a chip which is not "
-		       "in suspended state\n", __func__);
+		pr_err("%s called for a chip which is not in suspended state\n",
+			__func__);
 }
 
-/*
- * Set default functions
- */
+/* Set default functions */
 static void nand_set_defaults(struct nand_chip *chip, int busw)
 {
 	/* check for proper chip_delay setup, set 20us if not */
@@ -2793,23 +2811,21 @@
 
 }
 
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
 static void sanitize_string(uint8_t *s, size_t len)
 {
 	ssize_t i;
 
-	/* null terminate */
+	/* Null terminate */
 	s[len - 1] = 0;
 
-	/* remove non printable chars */
+	/* Remove non printable chars */
 	for (i = 0; i < len - 1; i++) {
 		if (s[i] < ' ' || s[i] > 127)
 			s[i] = '?';
 	}
 
-	/* remove trailing spaces */
+	/* Remove trailing spaces */
 	strim(s);
 }
 
@@ -2826,28 +2842,28 @@
 }
 
 /*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
  */
 static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
-					int busw)
+					int *busw)
 {
 	struct nand_onfi_params *p = &chip->onfi_params;
 	int i;
 	int val;
 
-	/* try ONFI for unknow chip or LP */
+	/* Try ONFI for unknown chip or LP */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
 	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
-	printk(KERN_INFO "ONFI flash detected\n");
+	pr_info("ONFI flash detected\n");
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
 		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
 		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
 				le16_to_cpu(p->crc)) {
-			printk(KERN_INFO "ONFI param page %d valid\n", i);
+			pr_info("ONFI param page %d valid\n", i);
 			break;
 		}
 	}
@@ -2855,7 +2871,7 @@
 	if (i == 3)
 		return 0;
 
-	/* check version */
+	/* Check version */
 	val = le16_to_cpu(p->revision);
 	if (val & (1 << 5))
 		chip->onfi_version = 23;
@@ -2871,8 +2887,7 @@
 		chip->onfi_version = 0;
 
 	if (!chip->onfi_version) {
-		printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
-								__func__, val);
+		pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
 		return 0;
 	}
 
@@ -2884,9 +2899,9 @@
 	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
 	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
 	chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
-	busw = 0;
+	*busw = 0;
 	if (le16_to_cpu(p->features) & 1)
-		busw = NAND_BUSWIDTH_16;
+		*busw = NAND_BUSWIDTH_16;
 
 	chip->options &= ~NAND_CHIPOPTIONS_MSK;
 	chip->options |= (NAND_NO_READRDY |
@@ -2896,7 +2911,7 @@
 }
 
 /*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Get the flash and manufacturer id and lookup if the type is supported.
  */
 static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 						  struct nand_chip *chip,
@@ -2913,7 +2928,7 @@
 
 	/*
 	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
-	 * after power-up
+	 * after power-up.
 	 */
 	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 
@@ -2924,7 +2939,8 @@
 	*maf_id = chip->read_byte(mtd);
 	*dev_id = chip->read_byte(mtd);
 
-	/* Try again to make sure, as some systems the bus-hold or other
+	/*
+	 * Try again to make sure, as some systems the bus-hold or other
 	 * interface concerns can cause random data which looks like a
 	 * possibly credible NAND flash to appear. If the two results do
 	 * not match, ignore the device completely.
@@ -2936,9 +2952,9 @@
 		id_data[i] = chip->read_byte(mtd);
 
 	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
-		printk(KERN_INFO "%s: second ID read did not match "
-		       "%02x,%02x against %02x,%02x\n", __func__,
-		       *maf_id, *dev_id, id_data[0], id_data[1]);
+		pr_info("%s: second ID read did not match "
+			"%02x,%02x against %02x,%02x\n", __func__,
+			*maf_id, *dev_id, id_data[0], id_data[1]);
 		return ERR_PTR(-ENODEV);
 	}
 
@@ -2952,7 +2968,7 @@
 	chip->onfi_version = 0;
 	if (!type->name || !type->pagesize) {
 		/* Check is chip is ONFI compliant */
-		ret = nand_flash_detect_onfi(mtd, chip, busw);
+		ret = nand_flash_detect_onfi(mtd, chip, &busw);
 		if (ret)
 			goto ident_done;
 	}
@@ -2973,7 +2989,7 @@
 	chip->chipsize = (uint64_t)type->chipsize << 20;
 
 	if (!type->pagesize && chip->init_size) {
-		/* set the pagesize, oobsize, erasesize by the driver*/
+		/* Set the pagesize, oobsize, erasesize by the driver */
 		busw = chip->init_size(mtd, chip, id_data);
 	} else if (!type->pagesize) {
 		int extid;
@@ -3033,7 +3049,7 @@
 		}
 	} else {
 		/*
-		 * Old devices have chip data hardcoded in the device id table
+		 * Old devices have chip data hardcoded in the device id table.
 		 */
 		mtd->erasesize = type->erasesize;
 		mtd->writesize = type->pagesize;
@@ -3043,7 +3059,7 @@
 		/*
 		 * Check for Spansion/AMD ID + repeating 5th, 6th byte since
 		 * some Spansion chips have erasesize that conflicts with size
-		 * listed in nand_ids table
+		 * listed in nand_ids table.
 		 * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
 		 */
 		if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
@@ -3057,15 +3073,16 @@
 	chip->options &= ~NAND_CHIPOPTIONS_MSK;
 	chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
 
-	/* Check if chip is a not a samsung device. Do not clear the
-	 * options for chips which are not having an extended id.
+	/*
+	 * Check if chip is not a Samsung device. Do not clear the
+	 * options for chips which do not have an extended id.
 	 */
 	if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
 		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
 ident_done:
 
 	/*
-	 * Set chip as a default. Board drivers can override it, if necessary
+	 * Set chip as a default. Board drivers can override it, if necessary.
 	 */
 	chip->options |= NAND_NO_AUTOINCR;
 
@@ -3077,21 +3094,21 @@
 
 	/*
 	 * Check, if buswidth is correct. Hardware drivers should set
-	 * chip correct !
+	 * chip correct!
 	 */
 	if (busw != (chip->options & NAND_BUSWIDTH_16)) {
-		printk(KERN_INFO "NAND device: Manufacturer ID:"
-		       " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
-		       *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
-		printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
-		       (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
-		       busw ? 16 : 8);
+		pr_info("NAND device: Manufacturer ID:"
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+			*dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+		pr_warn("NAND bus width %d instead %d bit\n",
+			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+			   busw ? 16 : 8);
 		return ERR_PTR(-EINVAL);
 	}
 
 	/* Calculate the address shift from the page size */
 	chip->page_shift = ffs(mtd->writesize) - 1;
-	/* Convert chipsize to number of pages per chip -1. */
+	/* Convert chipsize to number of pages per chip -1 */
 	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 
 	chip->bbt_erase_shift = chip->phys_erase_shift =
@@ -3121,7 +3138,7 @@
 	if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
 			(*maf_id == NAND_MFR_SAMSUNG ||
 			 *maf_id == NAND_MFR_HYNIX))
-		chip->options |= NAND_BBT_SCANLASTPAGE;
+		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
 	else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
 				(*maf_id == NAND_MFR_SAMSUNG ||
 				 *maf_id == NAND_MFR_HYNIX ||
@@ -3129,17 +3146,7 @@
 				 *maf_id == NAND_MFR_AMD)) ||
 			(mtd->writesize == 2048 &&
 			 *maf_id == NAND_MFR_MICRON))
-		chip->options |= NAND_BBT_SCAN2NDPAGE;
-
-	/*
-	 * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
-	 */
-	if (!(busw & NAND_BUSWIDTH_16) &&
-			*maf_id == NAND_MFR_STMICRO &&
-			mtd->writesize == 2048) {
-		chip->options |= NAND_BBT_SCANBYTE1AND6;
-		chip->badblockpos = 0;
-	}
+		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
 
 	/* Check for AND chips with 4 page planes */
 	if (chip->options & NAND_4PAGE_ARRAY)
@@ -3147,12 +3154,11 @@
 	else
 		chip->erase_cmd = single_erase_cmd;
 
-	/* Do not replace user supplied command function ! */
+	/* Do not replace user supplied command function! */
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
 		chip->cmdfunc = nand_command_lp;
 
-	/* TODO onfi flash name */
-	printk(KERN_INFO "NAND device: Manufacturer ID:"
+	pr_info("NAND device: Manufacturer ID:"
 		" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
 		nand_manuf_ids[maf_idx].name,
 		chip->onfi_version ? chip->onfi_params.model : type->name);
@@ -3162,12 +3168,12 @@
 
 /**
  * nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd:	     MTD device structure
- * @maxchips:	     Number of chips to scan for
- * @table:	     Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
  *
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
  *
  * The mtd->owner field must be set to the module of the caller.
  */
@@ -3189,7 +3195,7 @@
 
 	if (IS_ERR(type)) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
-			printk(KERN_WARNING "No NAND device found.\n");
+			pr_warn("No NAND device found\n");
 		chip->select_chip(mtd, -1);
 		return PTR_ERR(type);
 	}
@@ -3207,7 +3213,7 @@
 			break;
 	}
 	if (i > 1)
-		printk(KERN_INFO "%d NAND chips detected\n", i);
+		pr_info("%d NAND chips detected\n", i);
 
 	/* Store the number of chips and calc total size for mtd */
 	chip->numchips = i;
@@ -3220,11 +3226,11 @@
 
 /**
  * nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd:	    MTD device structure
+ * @mtd: MTD device structure
  *
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
  */
 int nand_scan_tail(struct mtd_info *mtd)
 {
@@ -3240,7 +3246,7 @@
 	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
 
 	/*
-	 * If no default placement scheme is given, select an appropriate one
+	 * If no default placement scheme is given, select an appropriate one.
 	 */
 	if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
 		switch (mtd->oobsize) {
@@ -3257,8 +3263,8 @@
 			chip->ecc.layout = &nand_oob_128;
 			break;
 		default:
-			printk(KERN_WARNING "No oob scheme defined for "
-			       "oobsize %d\n", mtd->oobsize);
+			pr_warn("No oob scheme defined for oobsize %d\n",
+				   mtd->oobsize);
 			BUG();
 		}
 	}
@@ -3267,7 +3273,7 @@
 		chip->write_page = nand_write_page;
 
 	/*
-	 * check ECC mode, default to software if 3byte/512byte hardware ECC is
+	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
 	 * selected and we have 256 byte pagesize fallback to software ECC
 	 */
 
@@ -3276,15 +3282,15 @@
 		/* Similar to NAND_ECC_HW, but a separate read_page handle */
 		if (!chip->ecc.calculate || !chip->ecc.correct ||
 		     !chip->ecc.hwctl) {
-			printk(KERN_WARNING "No ECC functions supplied; "
-			       "Hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
 			BUG();
 		}
 		if (!chip->ecc.read_page)
 			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
 
 	case NAND_ECC_HW:
-		/* Use standard hwecc read page function ? */
+		/* Use standard hwecc read page function? */
 		if (!chip->ecc.read_page)
 			chip->ecc.read_page = nand_read_page_hwecc;
 		if (!chip->ecc.write_page)
@@ -3305,11 +3311,11 @@
 		     chip->ecc.read_page == nand_read_page_hwecc ||
 		     !chip->ecc.write_page ||
 		     chip->ecc.write_page == nand_write_page_hwecc)) {
-			printk(KERN_WARNING "No ECC functions supplied; "
-			       "Hardware ECC not possible\n");
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
 			BUG();
 		}
-		/* Use standard syndrome read/write page function ? */
+		/* Use standard syndrome read/write page function? */
 		if (!chip->ecc.read_page)
 			chip->ecc.read_page = nand_read_page_syndrome;
 		if (!chip->ecc.write_page)
@@ -3325,9 +3331,9 @@
 
 		if (mtd->writesize >= chip->ecc.size)
 			break;
-		printk(KERN_WARNING "%d byte HW ECC not possible on "
-		       "%d byte page size, fallback to SW ECC\n",
-		       chip->ecc.size, mtd->writesize);
+		pr_warn("%d byte HW ECC not possible on "
+			   "%d byte page size, fallback to SW ECC\n",
+			   chip->ecc.size, mtd->writesize);
 		chip->ecc.mode = NAND_ECC_SOFT;
 
 	case NAND_ECC_SOFT:
@@ -3347,7 +3353,7 @@
 
 	case NAND_ECC_SOFT_BCH:
 		if (!mtd_nand_has_bch()) {
-			printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+			pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
 			BUG();
 		}
 		chip->ecc.calculate = nand_bch_calculate_ecc;
@@ -3362,8 +3368,8 @@
 		/*
 		 * Board driver should supply ecc.size and ecc.bytes values to
 		 * select how many bits are correctable; see nand_bch_init()
-		 * for details.
-		 * Otherwise, default to 4 bits for large page devices
+		 * for details. Otherwise, default to 4 bits for large page
+		 * devices.
 		 */
 		if (!chip->ecc.size && (mtd->oobsize >= 64)) {
 			chip->ecc.size = 512;
@@ -3374,14 +3380,14 @@
 					       chip->ecc.bytes,
 					       &chip->ecc.layout);
 		if (!chip->ecc.priv) {
-			printk(KERN_WARNING "BCH ECC initialization failed!\n");
+			pr_warn("BCH ECC initialization failed!\n");
 			BUG();
 		}
 		break;
 
 	case NAND_ECC_NONE:
-		printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
-		       "This is not recommended !!\n");
+		pr_warn("NAND_ECC_NONE selected by board driver. "
+			   "This is not recommended!\n");
 		chip->ecc.read_page = nand_read_page_raw;
 		chip->ecc.write_page = nand_write_page_raw;
 		chip->ecc.read_oob = nand_read_oob_std;
@@ -3393,14 +3399,19 @@
 		break;
 
 	default:
-		printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
-		       chip->ecc.mode);
+		pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
 		BUG();
 	}
 
+	/* For many systems, the standard OOB write also works for raw */
+	if (!chip->ecc.read_oob_raw)
+		chip->ecc.read_oob_raw = chip->ecc.read_oob;
+	if (!chip->ecc.write_oob_raw)
+		chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
 	/*
 	 * The number of bytes available for a client to place data into
-	 * the out of band area
+	 * the out of band area.
 	 */
 	chip->ecc.layout->oobavail = 0;
 	for (i = 0; chip->ecc.layout->oobfree[i].length
@@ -3411,19 +3422,16 @@
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC
-	 * mode
+	 * mode.
 	 */
 	chip->ecc.steps = mtd->writesize / chip->ecc.size;
 	if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
-		printk(KERN_WARNING "Invalid ecc parameters\n");
+		pr_warn("Invalid ECC parameters\n");
 		BUG();
 	}
 	chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
 
-	/*
-	 * Allow subpage writes up to ecc.steps. Not possible for MLC
-	 * FLASH.
-	 */
+	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
 	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
 	    !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
 		switch (chip->ecc.steps) {
@@ -3481,9 +3489,11 @@
 }
 EXPORT_SYMBOL(nand_scan_tail);
 
-/* is_module_text_address() isn't exported, and it's mostly a pointless
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
  * test if this is a module _anyway_ -- they'd have to try _really_ hard
- * to call us from in-kernel code if the core NAND support is modular. */
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
 #ifdef MODULE
 #define caller_is_module() (1)
 #else
@@ -3493,15 +3503,13 @@
 
 /**
  * nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd:	MTD device structure
- * @maxchips:	Number of chips to scan for
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
  *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
- *
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
  */
 int nand_scan(struct mtd_info *mtd, int maxchips)
 {
@@ -3509,8 +3517,7 @@
 
 	/* Many callers got this wrong, so check for it for a while... */
 	if (!mtd->owner && caller_is_module()) {
-		printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
-				__func__);
+		pr_crit("%s called with NULL mtd->owner!\n", __func__);
 		BUG();
 	}
 
@@ -3523,8 +3530,8 @@
 
 /**
  * nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd:	MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
 void nand_release(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ccbeaa1..69148ae 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -14,7 +14,7 @@
  *
  * When nand_scan_bbt is called, then it tries to find the bad block table
  * depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
  * marked good / bad blocks. This information is used to create a memory BBT.
  * Once a new bad block is discovered then the "factory" information is updated
  * on the device.
@@ -36,9 +36,9 @@
  * The table is marked in the OOB area with an ident pattern and a version
  * number which indicates which of both tables is more up to date. If the NAND
  * controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
  *
  * The table uses 2 bits per block
  * 11b:		block is good
@@ -67,6 +67,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
 {
@@ -80,17 +81,15 @@
 
 /**
  * check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf:	the buffer to search
- * @len:	the length of buffer to search
- * @paglen:	the pagelength
- * @td:		search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
  *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
 {
 	int i, end = 0;
@@ -109,32 +108,8 @@
 	p += end;
 
 	/* Compare the pattern */
-	for (i = 0; i < td->len; i++) {
-		if (p[i] != td->pattern[i])
-			return -1;
-	}
-
-	/* Check both positions 1 and 6 for pattern? */
-	if (td->options & NAND_BBT_SCANBYTE1AND6) {
-		if (td->options & NAND_BBT_SCANEMPTY) {
-			p += td->len;
-			end += NAND_SMALL_BADBLOCK_POS - td->offs;
-			/* Check region between positions 1 and 6 */
-			for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
-					i++) {
-				if (*p++ != 0xff)
-					return -1;
-			}
-		}
-		else {
-			p += NAND_SMALL_BADBLOCK_POS - td->offs;
-		}
-		/* Compare the pattern */
-		for (i = 0; i < td->len; i++) {
-			if (p[i] != td->pattern[i])
-				return -1;
-		}
-	}
+	if (memcmp(p, td->pattern, td->len))
+		return -1;
 
 	if (td->options & NAND_BBT_SCANEMPTY) {
 		p += td->len;
@@ -149,14 +124,13 @@
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf:	the buffer to search
- * @td:		search pattern descriptor
+ * @buf: the buffer to search
+ * @td:	search pattern descriptor
  *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
 {
 	int i;
@@ -167,21 +141,14 @@
 		if (p[td->offs + i] != td->pattern[i])
 			return -1;
 	}
-	/* Need to check location 1 AND 6? */
-	if (td->options & NAND_BBT_SCANBYTE1AND6) {
-		for (i = 0; i < td->len; i++) {
-			if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
-				return -1;
-		}
-	}
 	return 0;
 }
 
 /**
  * add_marker_len - compute the length of the marker in data area
- * @td:		BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
  *
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
  */
 static u32 add_marker_len(struct nand_bbt_descr *td)
 {
@@ -198,34 +165,33 @@
 
 /**
  * read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @page:	the starting page
- * @num:	the number of bbt descriptors to read
- * @td:		the bbt describtion table
- * @offs:	offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
  *
  * Read the bad block table starting from page.
- *
  */
 static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
 		struct nand_bbt_descr *td, int offs)
 {
-	int res, i, j, act = 0;
+	int res, ret = 0, i, j, act = 0;
 	struct nand_chip *this = mtd->priv;
 	size_t retlen, len, totlen;
 	loff_t from;
 	int bits = td->options & NAND_BBT_NRBITS_MSK;
-	uint8_t msk = (uint8_t) ((1 << bits) - 1);
+	uint8_t msk = (uint8_t)((1 << bits) - 1);
 	u32 marker_len;
 	int reserved_block_code = td->reserved_block_code;
 
 	totlen = (num * bits) >> 3;
 	marker_len = add_marker_len(td);
-	from = ((loff_t) page) << this->page_shift;
+	from = ((loff_t)page) << this->page_shift;
 
 	while (totlen) {
-		len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+		len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
 		if (marker_len) {
 			/*
 			 * In case the BBT marker is not in the OOB area it
@@ -237,11 +203,18 @@
 		}
 		res = mtd->read(mtd, from, len, &retlen, buf);
 		if (res < 0) {
-			if (retlen != len) {
-				printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+			if (mtd_is_eccerr(res)) {
+				pr_info("nand_bbt: ECC error in BBT at "
+					"0x%012llx\n", from & ~mtd->writesize);
+				return res;
+			} else if (mtd_is_bitflip(res)) {
+				pr_info("nand_bbt: corrected error in BBT at "
+					"0x%012llx\n", from & ~mtd->writesize);
+				ret = res;
+			} else {
+				pr_info("nand_bbt: error reading BBT\n");
 				return res;
 			}
-			printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
 		}
 
 		/* Analyse data */
@@ -252,17 +225,19 @@
 				if (tmp == msk)
 					continue;
 				if (reserved_block_code && (tmp == reserved_block_code)) {
-					printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
-					       (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+					pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+						 (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
 					this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
 					mtd->ecc_stats.bbtblocks++;
 					continue;
 				}
-				/* Leave it for now, if its matured we can move this
-				 * message to MTD_DEBUG_LEVEL0 */
-				printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
-				       (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-				/* Factory marked bad or worn out ? */
+				/*
+				 * Leave it for now, if it's matured we can
+				 * move this message to pr_debug.
+				 */
+				pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+					 (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+				/* Factory marked bad or worn out? */
 				if (tmp == 0)
 					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
 				else
@@ -273,20 +248,20 @@
 		totlen -= len;
 		from += len;
 	}
-	return 0;
+	return ret;
 }
 
 /**
  * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @chip:	read the table for a specific chip, -1 read all chips.
- *		Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ *        NAND_BBT_PERCHIP option is set
  *
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
 static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
 {
 	struct nand_chip *this = mtd->priv;
@@ -312,9 +287,7 @@
 	return 0;
 }
 
-/*
- * BBT marker is in the first page, no OOB.
- */
+/* BBT marker is in the first page, no OOB */
 static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 			 struct nand_bbt_descr *td)
 {
@@ -328,35 +301,26 @@
 	return mtd->read(mtd, offs, len, &retlen, buf);
 }
 
-/*
- * Scan read raw data from flash
- */
+/* Scan read raw data from flash */
 static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
 			 size_t len)
 {
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_RAW;
+	ops.mode = MTD_OPS_RAW;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 
-
 	while (len > 0) {
-		if (len <= mtd->writesize) {
-			ops.oobbuf = buf + len;
-			ops.datbuf = buf;
-			ops.len = len;
-			return mtd->read_oob(mtd, offs, &ops);
-		} else {
-			ops.oobbuf = buf + mtd->writesize;
-			ops.datbuf = buf;
-			ops.len = mtd->writesize;
-			res = mtd->read_oob(mtd, offs, &ops);
+		ops.datbuf = buf;
+		ops.len = min(len, (size_t)mtd->writesize);
+		ops.oobbuf = buf + ops.len;
 
-			if (res)
-				return res;
-		}
+		res = mtd->read_oob(mtd, offs, &ops);
+
+		if (res)
+			return res;
 
 		buf += mtd->oobsize + mtd->writesize;
 		len -= mtd->writesize;
@@ -373,15 +337,13 @@
 		return scan_read_raw_oob(mtd, buf, offs, len);
 }
 
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
 static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
 			  uint8_t *buf, uint8_t *oob)
 {
 	struct mtd_oob_ops ops;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 	ops.datbuf = buf;
@@ -402,15 +364,14 @@
 
 /**
  * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md:	descriptor for the bad block table mirror
  *
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
 static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
 			 struct nand_bbt_descr *td, struct nand_bbt_descr *md)
 {
@@ -421,8 +382,8 @@
 		scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
 			      mtd->writesize, td);
 		td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
-		printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
-		       td->pages[0], td->version[0]);
+		pr_info("Bad block table at page %d, version 0x%02X\n",
+			 td->pages[0], td->version[0]);
 	}
 
 	/* Read the mirror version, if available */
@@ -430,15 +391,13 @@
 		scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
 			      mtd->writesize, td);
 		md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
-		printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
-		       md->pages[0], md->version[0]);
+		pr_info("Bad block table at page %d, version 0x%02X\n",
+			 md->pages[0], md->version[0]);
 	}
 	return 1;
 }
 
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
 static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 			   loff_t offs, uint8_t *buf, size_t readlen,
 			   int scanlen, int len)
@@ -446,7 +405,8 @@
 	int ret, j;
 
 	ret = scan_read_raw_oob(mtd, buf, offs, readlen);
-	if (ret)
+	/* Ignore ECC errors when checking for BBM */
+	if (ret && !mtd_is_bitflip_or_eccerr(ret))
 		return ret;
 
 	for (j = 0; j < len; j++, buf += scanlen) {
@@ -456,9 +416,7 @@
 	return 0;
 }
 
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 			   loff_t offs, uint8_t *buf, int len)
 {
@@ -469,16 +427,16 @@
 	ops.oobbuf = buf;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
 	for (j = 0; j < len; j++) {
 		/*
-		 * Read the full oob until read_oob is fixed to
-		 * handle single byte reads for 16 bit
-		 * buswidth
+		 * Read the full oob until read_oob is fixed to handle single
+		 * byte reads for 16 bit buswidth.
 		 */
 		ret = mtd->read_oob(mtd, offs, &ops);
-		if (ret)
+		/* Ignore ECC errors when checking for BBM */
+		if (ret && !mtd_is_bitflip_or_eccerr(ret))
 			return ret;
 
 		if (check_short_pattern(buf, bd))
@@ -491,14 +449,14 @@
 
 /**
  * create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @bd:		descriptor for the good/bad block search pattern
- * @chip:	create the table for a specific chip, -1 read all chips.
- *		Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ *        if NAND_BBT_PERCHIP option is set
  *
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
  */
 static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *bd, int chip)
@@ -509,7 +467,7 @@
 	loff_t from;
 	size_t readlen;
 
-	printk(KERN_INFO "Scanning device for bad blocks\n");
+	pr_info("Scanning device for bad blocks\n");
 
 	if (bd->options & NAND_BBT_SCANALLPAGES)
 		len = 1 << (this->bbt_erase_shift - this->page_shift);
@@ -529,14 +487,16 @@
 	}
 
 	if (chip == -1) {
-		/* Note that numblocks is 2 * (real numblocks) here, see i+=2
-		 * below as it makes shifting and masking less painful */
+		/*
+		 * Note that numblocks is 2 * (real numblocks) here, see i+=2
+		 * below as it makes shifting and masking less painful
+		 */
 		numblocks = mtd->size >> (this->bbt_erase_shift - 1);
 		startblock = 0;
 		from = 0;
 	} else {
 		if (chip >= this->numchips) {
-			printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+			pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
 			       chip + 1, this->numchips);
 			return -EINVAL;
 		}
@@ -546,7 +506,7 @@
 		from = (loff_t)startblock << (this->bbt_erase_shift - 1);
 	}
 
-	if (this->options & NAND_BBT_SCANLASTPAGE)
+	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
 		from += mtd->erasesize - (mtd->writesize * len);
 
 	for (i = startblock; i < numblocks;) {
@@ -565,8 +525,8 @@
 
 		if (ret) {
 			this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-			printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
-			       i >> 1, (unsigned long long)from);
+			pr_warn("Bad eraseblock %d at 0x%012llx\n",
+				i >> 1, (unsigned long long)from);
 			mtd->ecc_stats.badblocks++;
 		}
 
@@ -578,20 +538,18 @@
 
 /**
  * search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
  *
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
  *
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
  */
 static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
 {
@@ -602,7 +560,7 @@
 	int bbtblocks;
 	int blocktopage = this->bbt_erase_shift - this->page_shift;
 
-	/* Search direction top -> down ? */
+	/* Search direction top -> down? */
 	if (td->options & NAND_BBT_LASTBLOCK) {
 		startblock = (mtd->size >> this->bbt_erase_shift) - 1;
 		dir = -1;
@@ -611,7 +569,7 @@
 		dir = 1;
 	}
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chips = this->numchips;
 		bbtblocks = this->chipsize >> this->bbt_erase_shift;
@@ -650,23 +608,23 @@
 	/* Check, if we found a bbt for each requested chip */
 	for (i = 0; i < chips; i++) {
 		if (td->pages[i] == -1)
-			printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+			pr_warn("Bad block table not found for chip %d\n", i);
 		else
-			printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
-			       td->version[i]);
+			pr_info("Bad block table found at page %d, version "
+				 "0x%02X\n", td->pages[i], td->version[i]);
 	}
 	return 0;
 }
 
 /**
  * search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
  *
- * Search and read the bad block table(s)
-*/
+ * Search and read the bad block table(s).
+ */
 static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
 {
 	/* Search the primary table */
@@ -682,16 +640,14 @@
 
 /**
  * write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
  *
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @td:		descriptor for the bad block table
- * @md:		descriptor for the bad block table mirror
- * @chipsel:	selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
 static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
 		     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
 		     int chipsel)
@@ -710,14 +666,14 @@
 	ops.ooblen = mtd->oobsize;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 
 	if (!rcode)
 		rcode = 0xff;
-	/* Write bad block table per chip rather than per device ? */
+	/* Write bad block table per chip rather than per device? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
-		/* Full device write or specific chip ? */
+		/* Full device write or specific chip? */
 		if (chipsel == -1) {
 			nrchips = this->numchips;
 		} else {
@@ -731,8 +687,8 @@
 
 	/* Loop through the chips */
 	for (; chip < nrchips; chip++) {
-
-		/* There was already a version of the table, reuse the page
+		/*
+		 * There was already a version of the table, reuse the page
 		 * This applies for absolute placement too, as we have the
 		 * page nr. in td->pages.
 		 */
@@ -741,8 +697,10 @@
 			goto write;
 		}
 
-		/* Automatic placement of the bad block table */
-		/* Search direction top -> down ? */
+		/*
+		 * Automatic placement of the bad block table. Search direction
+		 * top -> down?
+		 */
 		if (td->options & NAND_BBT_LASTBLOCK) {
 			startblock = numblocks * (chip + 1) - 1;
 			dir = -1;
@@ -766,7 +724,7 @@
 			if (!md || md->pages[chip] != page)
 				goto write;
 		}
-		printk(KERN_ERR "No space left to write bad block table\n");
+		pr_err("No space left to write bad block table\n");
 		return -ENOSPC;
 	write:
 
@@ -791,24 +749,22 @@
 
 		bbtoffs = chip * (numblocks >> 2);
 
-		to = ((loff_t) page) << this->page_shift;
+		to = ((loff_t)page) << this->page_shift;
 
-		/* Must we save the block contents ? */
+		/* Must we save the block contents? */
 		if (td->options & NAND_BBT_SAVECONTENT) {
 			/* Make it block aligned */
-			to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+			to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
 			len = 1 << this->bbt_erase_shift;
 			res = mtd->read(mtd, to, len, &retlen, buf);
 			if (res < 0) {
 				if (retlen != len) {
-					printk(KERN_INFO "nand_bbt: Error "
-					       "reading block for writing "
-					       "the bad block table\n");
+					pr_info("nand_bbt: error reading block "
+						"for writing the bad block table\n");
 					return res;
 				}
-				printk(KERN_WARNING "nand_bbt: ECC error "
-				       "while reading block for writing "
-				       "bad block table\n");
+				pr_warn("nand_bbt: ECC error while reading "
+					"block for writing bad block table\n");
 			}
 			/* Read oob data */
 			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -821,19 +777,19 @@
 			pageoffs = page - (int)(to >> this->page_shift);
 			offs = pageoffs << this->page_shift;
 			/* Preset the bbt area with 0xff */
-			memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+			memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
 			ooboffs = len + (pageoffs * mtd->oobsize);
 
 		} else if (td->options & NAND_BBT_NO_OOB) {
 			ooboffs = 0;
 			offs = td->len;
-			/* the version byte */
+			/* The version byte */
 			if (td->options & NAND_BBT_VERSION)
 				offs++;
 			/* Calc length */
-			len = (size_t) (numblocks >> sft);
+			len = (size_t)(numblocks >> sft);
 			len += offs;
-			/* Make it page aligned ! */
+			/* Make it page aligned! */
 			len = ALIGN(len, mtd->writesize);
 			/* Preset the buffer with 0xff */
 			memset(buf, 0xff, len);
@@ -841,8 +797,8 @@
 			memcpy(buf, td->pattern, td->len);
 		} else {
 			/* Calc length */
-			len = (size_t) (numblocks >> sft);
-			/* Make it page aligned ! */
+			len = (size_t)(numblocks >> sft);
+			/* Make it page aligned! */
 			len = ALIGN(len, mtd->writesize);
 			/* Preset the buffer with 0xff */
 			memset(buf, 0xff, len +
@@ -856,13 +812,13 @@
 		if (td->options & NAND_BBT_VERSION)
 			buf[ooboffs + td->veroffs] = td->version[chip];
 
-		/* walk through the memory table */
+		/* Walk through the memory table */
 		for (i = 0; i < numblocks;) {
 			uint8_t dat;
 			dat = this->bbt[bbtoffs + (i >> 2)];
 			for (j = 0; j < 4; j++, i++) {
 				int sftcnt = (i << (3 - sft)) & sftmsk;
-				/* Do not store the reserved bbt blocks ! */
+				/* Do not store the reserved bbt blocks! */
 				buf[offs + (i >> sft)] &=
 					~(msk[dat & 0x03] << sftcnt);
 				dat >>= 2;
@@ -883,8 +839,8 @@
 		if (res < 0)
 			goto outerr;
 
-		printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
-		       "0x%02X\n", (unsigned long long)to, td->version[chip]);
+		pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+			 (unsigned long long)to, td->version[chip]);
 
 		/* Mark it as used */
 		td->pages[chip] = page;
@@ -892,19 +848,18 @@
 	return 0;
 
  outerr:
-	printk(KERN_WARNING
-	       "nand_bbt: Error while writing bad block table %d\n", res);
+	pr_warn("nand_bbt: error while writing bad block table %d\n", res);
 	return res;
 }
 
 /**
  * nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd:	MTD device structure
- * @bd:		descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
 static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -915,25 +870,24 @@
 
 /**
  * check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd:	MTD device structure
- * @buf:	temporary buffer
- * @bd:		descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
 static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
 {
-	int i, chips, writeops, chipsel, res;
+	int i, chips, writeops, create, chipsel, res, res2;
 	struct nand_chip *this = mtd->priv;
 	struct nand_bbt_descr *td = this->bbt_td;
 	struct nand_bbt_descr *md = this->bbt_md;
 	struct nand_bbt_descr *rd, *rd2;
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP)
 		chips = this->numchips;
 	else
@@ -941,86 +895,98 @@
 
 	for (i = 0; i < chips; i++) {
 		writeops = 0;
+		create = 0;
 		rd = NULL;
 		rd2 = NULL;
-		/* Per chip or per device ? */
+		res = res2 = 0;
+		/* Per chip or per device? */
 		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
-		/* Mirrored table available ? */
+		/* Mirrored table available? */
 		if (md) {
 			if (td->pages[i] == -1 && md->pages[i] == -1) {
+				create = 1;
 				writeops = 0x03;
-				goto create;
-			}
-
-			if (td->pages[i] == -1) {
+			} else if (td->pages[i] == -1) {
 				rd = md;
-				td->version[i] = md->version[i];
-				writeops = 1;
-				goto writecheck;
-			}
-
-			if (md->pages[i] == -1) {
+				writeops = 0x01;
+			} else if (md->pages[i] == -1) {
 				rd = td;
-				md->version[i] = td->version[i];
-				writeops = 2;
-				goto writecheck;
-			}
-
-			if (td->version[i] == md->version[i]) {
+				writeops = 0x02;
+			} else if (td->version[i] == md->version[i]) {
 				rd = td;
 				if (!(td->options & NAND_BBT_VERSION))
 					rd2 = md;
-				goto writecheck;
-			}
-
-			if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+			} else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
 				rd = td;
-				md->version[i] = td->version[i];
-				writeops = 2;
+				writeops = 0x02;
 			} else {
 				rd = md;
-				td->version[i] = md->version[i];
-				writeops = 1;
+				writeops = 0x01;
 			}
-
-			goto writecheck;
-
 		} else {
 			if (td->pages[i] == -1) {
+				create = 1;
 				writeops = 0x01;
-				goto create;
+			} else {
+				rd = td;
 			}
-			rd = td;
-			goto writecheck;
 		}
-	create:
-		/* Create the bad block table by scanning the device ? */
-		if (!(td->options & NAND_BBT_CREATE))
-			continue;
 
-		/* Create the table in memory by scanning the chip(s) */
-		if (!(this->options & NAND_CREATE_EMPTY_BBT))
-			create_bbt(mtd, buf, bd, chipsel);
+		if (create) {
+			/* Create the bad block table by scanning the device? */
+			if (!(td->options & NAND_BBT_CREATE))
+				continue;
 
-		td->version[i] = 1;
-		if (md)
-			md->version[i] = 1;
-	writecheck:
-		/* read back first ? */
-		if (rd)
-			read_abs_bbt(mtd, buf, rd, chipsel);
-		/* If they weren't versioned, read both. */
-		if (rd2)
-			read_abs_bbt(mtd, buf, rd2, chipsel);
+			/* Create the table in memory by scanning the chip(s) */
+			if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+				create_bbt(mtd, buf, bd, chipsel);
 
-		/* Write the bad block table to the device ? */
+			td->version[i] = 1;
+			if (md)
+				md->version[i] = 1;
+		}
+
+		/* Read back first? */
+		if (rd) {
+			res = read_abs_bbt(mtd, buf, rd, chipsel);
+			if (mtd_is_eccerr(res)) {
+				/* Mark table as invalid */
+				rd->pages[i] = -1;
+				rd->version[i] = 0;
+				i--;
+				continue;
+			}
+		}
+		/* If they weren't versioned, read both */
+		if (rd2) {
+			res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+			if (mtd_is_eccerr(res2)) {
+				/* Mark table as invalid */
+				rd2->pages[i] = -1;
+				rd2->version[i] = 0;
+				i--;
+				continue;
+			}
+		}
+
+		/* Scrub the flash table(s)? */
+		if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+			writeops = 0x03;
+
+		/* Update version numbers before writing */
+		if (md) {
+			td->version[i] = max(td->version[i], md->version[i]);
+			md->version[i] = td->version[i];
+		}
+
+		/* Write the bad block table to the device? */
 		if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
 			res = write_bbt(mtd, buf, td, md, chipsel);
 			if (res < 0)
 				return res;
 		}
 
-		/* Write the mirror bad block table to the device ? */
+		/* Write the mirror bad block table to the device? */
 		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
 			res = write_bbt(mtd, buf, md, td, chipsel);
 			if (res < 0)
@@ -1032,20 +998,19 @@
 
 /**
  * mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd:	MTD device structure
- * @td:		bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
  *
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
 static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
 {
 	struct nand_chip *this = mtd->priv;
 	int i, j, chips, block, nrblocks, update;
 	uint8_t oldval, newval;
 
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chips = this->numchips;
 		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
@@ -1082,9 +1047,11 @@
 				update = 1;
 			block += 2;
 		}
-		/* If we want reserved blocks to be recorded to flash, and some
-		   new ones have been marked, then we need to update the stored
-		   bbts.  This should only happen once. */
+		/*
+		 * If we want reserved blocks to be recorded to flash, and some
+		 * new ones have been marked, then we need to update the stored
+		 * bbts.  This should only happen once.
+		 */
 		if (update && td->reserved_block_code)
 			nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
 	}
@@ -1092,8 +1059,8 @@
 
 /**
  * verify_bbt_descr - verify the bad block description
- * @mtd:	MTD device structure
- * @bd:		the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
  *
  * This functions performs a few sanity checks on the bad block description
  * table.
@@ -1111,16 +1078,16 @@
 	pattern_len = bd->len;
 	bits = bd->options & NAND_BBT_NRBITS_MSK;
 
-	BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
-			!(this->options & NAND_USE_FLASH_BBT));
+	BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+			!(this->bbt_options & NAND_BBT_USE_FLASH));
 	BUG_ON(!bits);
 
 	if (bd->options & NAND_BBT_VERSION)
 		pattern_len++;
 
 	if (bd->options & NAND_BBT_NO_OOB) {
-		BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
-		BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+		BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+		BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
 		BUG_ON(bd->offs);
 		if (bd->options & NAND_BBT_VERSION)
 			BUG_ON(bd->veroffs != bd->len);
@@ -1140,18 +1107,16 @@
 
 /**
  * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd:	MTD device structure
- * @bd:		descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
  *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
  *
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
- *
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
 int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
 {
 	struct nand_chip *this = mtd->priv;
@@ -1161,19 +1126,21 @@
 	struct nand_bbt_descr *md = this->bbt_md;
 
 	len = mtd->size >> (this->bbt_erase_shift + 2);
-	/* Allocate memory (2bit per block) and clear the memory bad block table */
+	/*
+	 * Allocate memory (2bit per block) and clear the memory bad block
+	 * table.
+	 */
 	this->bbt = kzalloc(len, GFP_KERNEL);
-	if (!this->bbt) {
-		printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+	if (!this->bbt)
 		return -ENOMEM;
-	}
 
-	/* If no primary table decriptor is given, scan the device
-	 * to build a memory based bad block table
+	/*
+	 * If no primary table decriptor is given, scan the device to build a
+	 * memory based bad block table.
 	 */
 	if (!td) {
 		if ((res = nand_memory_bbt(mtd, bd))) {
-			printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+			pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
 			kfree(this->bbt);
 			this->bbt = NULL;
 		}
@@ -1187,13 +1154,12 @@
 	len += (len >> this->page_shift) * mtd->oobsize;
 	buf = vmalloc(len);
 	if (!buf) {
-		printk(KERN_ERR "nand_bbt: Out of memory\n");
 		kfree(this->bbt);
 		this->bbt = NULL;
 		return -ENOMEM;
 	}
 
-	/* Is the bbt at a given page ? */
+	/* Is the bbt at a given page? */
 	if (td->options & NAND_BBT_ABSPAGE) {
 		res = read_abs_bbts(mtd, buf, td, md);
 	} else {
@@ -1215,15 +1181,15 @@
 
 /**
  * nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd:	MTD device structure
- * @offs:	the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
  *
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
 int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
 {
 	struct nand_chip *this = mtd->priv;
-	int len, res = 0, writeops = 0;
+	int len, res = 0;
 	int chip, chipsel;
 	uint8_t *buf;
 	struct nand_bbt_descr *td = this->bbt_td;
@@ -1236,14 +1202,10 @@
 	len = (1 << this->bbt_erase_shift);
 	len += (len >> this->page_shift) * mtd->oobsize;
 	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+	if (!buf)
 		return -ENOMEM;
-	}
 
-	writeops = md != NULL ? 0x03 : 0x01;
-
-	/* Do we have a bbt per chip ? */
+	/* Do we have a bbt per chip? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chip = (int)(offs >> this->chip_shift);
 		chipsel = chip;
@@ -1256,14 +1218,14 @@
 	if (md)
 		md->version[chip]++;
 
-	/* Write the bad block table to the device ? */
-	if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+	/* Write the bad block table to the device? */
+	if (td->options & NAND_BBT_WRITE) {
 		res = write_bbt(mtd, buf, td, md, chipsel);
 		if (res < 0)
 			goto out;
 	}
-	/* Write the mirror bad block table to the device ? */
-	if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+	/* Write the mirror bad block table to the device? */
+	if (md && (md->options & NAND_BBT_WRITE)) {
 		res = write_bbt(mtd, buf, md, td, chipsel);
 	}
 
@@ -1272,8 +1234,10 @@
 	return res;
 }
 
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
 static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
@@ -1285,8 +1249,7 @@
 	.pattern = scan_agand_pattern
 };
 
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
 
@@ -1330,31 +1293,27 @@
 	.pattern = mirror_pattern
 };
 
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
-		NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
 /**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this:	NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
  *
  * This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
  * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
  * passed to this function.
- *
  */
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
 {
 	struct nand_bbt_descr *bd;
 	if (this->badblock_pattern) {
-		printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+		pr_warn("Bad block pattern already allocated; not replacing\n");
 		return -EINVAL;
 	}
 	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
-	if (!bd) {
-		printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+	if (!bd)
 		return -ENOMEM;
-	}
-	bd->options = this->options & BBT_SCAN_OPTIONS;
+	bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
 	bd->offs = this->badblockpos;
 	bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
 	bd->pattern = scan_ff_pattern;
@@ -1365,22 +1324,20 @@
 
 /**
  * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd:	MTD device structure
+ * @mtd: MTD device structure
  *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
- *
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
 int nand_default_bbt(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 
-	/* Default for AG-AND. We must use a flash based
-	 * bad block table as the devices have factory marked
-	 * _good_ blocks. Erasing those blocks leads to loss
-	 * of the good / bad information, so we _must_ store
-	 * this information in a good / bad table during
-	 * startup
+	/*
+	 * Default for AG-AND. We must use a flash based bad block table as the
+	 * devices have factory marked _good_ blocks. Erasing those blocks
+	 * leads to loss of the good / bad information, so we _must_ store this
+	 * information in a good / bad table during startup.
 	 */
 	if (this->options & NAND_IS_AND) {
 		/* Use the default pattern descriptors */
@@ -1388,15 +1345,15 @@
 			this->bbt_td = &bbt_main_descr;
 			this->bbt_md = &bbt_mirror_descr;
 		}
-		this->options |= NAND_USE_FLASH_BBT;
+		this->bbt_options |= NAND_BBT_USE_FLASH;
 		return nand_scan_bbt(mtd, &agand_flashbased);
 	}
 
-	/* Is a flash based bad block table requested ? */
-	if (this->options & NAND_USE_FLASH_BBT) {
+	/* Is a flash based bad block table requested? */
+	if (this->bbt_options & NAND_BBT_USE_FLASH) {
 		/* Use the default pattern descriptors */
 		if (!this->bbt_td) {
-			if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+			if (this->bbt_options & NAND_BBT_NO_OOB) {
 				this->bbt_td = &bbt_main_no_bbt_descr;
 				this->bbt_md = &bbt_mirror_no_bbt_descr;
 			} else {
@@ -1410,18 +1367,17 @@
 	}
 
 	if (!this->badblock_pattern)
-		nand_create_default_bbt_descr(this);
+		nand_create_badblock_pattern(this);
 
 	return nand_scan_bbt(mtd, this->badblock_pattern);
 }
 
 /**
  * nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd:	MTD device structure
- * @offs:	offset in the device
- * @allowbbt:	allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
@@ -1432,8 +1388,9 @@
 	block = (int)(offs >> (this->bbt_erase_shift - 1));
 	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
-	      (unsigned int)offs, block >> 1, res);
+	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+			"(block %d) 0x%02x\n",
+			(unsigned int)offs, block >> 1, res);
 
 	switch ((int)res) {
 	case 0x00:
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index 0f931e7..3803e0b 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -93,8 +93,8 @@
 				buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
 			/* else error in ecc, no action needed */
 
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
-			      __func__, errloc[i]);
+			pr_debug("%s: corrected bitflip %u\n", __func__,
+					errloc[i]);
 		}
 	} else if (count < 0) {
 		printk(KERN_ERR "ecc unrecoverable error\n");
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 271b8e7..b7cfe0d 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -110,7 +110,7 @@
 
 /*
  * addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
  * this is only used for repairing parity
  * see the comments in nand_correct_data for more details
  */
@@ -153,7 +153,7 @@
  * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
  *			 block
  * @buf:	input buffer with raw data
- * @eccsize:	data bytes per ecc step (256 or 512)
+ * @eccsize:	data bytes per ECC step (256 or 512)
  * @code:	output buffer with ECC
  */
 void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
@@ -348,7 +348,7 @@
 		rp17 = (par ^ rp16) & 0xff;
 
 	/*
-	 * Finally calculate the ecc bits.
+	 * Finally calculate the ECC bits.
 	 * Again here it might seem that there are performance optimisations
 	 * possible, but benchmarks showed that on the system this is developed
 	 * the code below is the fastest
@@ -436,7 +436,7 @@
  * @buf:	raw data read from the chip
  * @read_ecc:	ECC from the chip
  * @calc_ecc:	the ECC calculated from raw data
- * @eccsize:	data bytes per ecc step (256 or 512)
+ * @eccsize:	data bytes per ECC step (256 or 512)
  *
  * Detect and correct a 1 bit error for eccsize byte block
  */
@@ -505,7 +505,7 @@
 	}
 	/* count nr of bits; use table lookup, faster than calculating it */
 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
-		return 1;	/* error in ecc data; no action needed */
+		return 1;	/* error in ECC data; no action needed */
 
 	printk(KERN_ERR "uncorrectable error : ");
 	return -1;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 357e8c5..34c03be 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2273,9 +2273,9 @@
 
 	switch (bbt) {
 	case 2:
-		 chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+		 chip->bbt_options |= NAND_BBT_NO_OOB;
 	case 1:
-		 chip->options |= NAND_USE_FLASH_BBT;
+		 chip->bbt_options |= NAND_BBT_USE_FLASH;
 	case 0:
 		break;
 	default:
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index ea2dea8..ee17139 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -42,7 +42,6 @@
 	struct nand_chip chip;
 	int chip_select;
 	struct nand_hw_control ndfc_control;
-	struct mtd_partition *parts;
 };
 
 static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
@@ -159,13 +158,9 @@
 static int ndfc_chip_init(struct ndfc_controller *ndfc,
 			  struct device_node *node)
 {
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	static const char *part_types[] = { "cmdlinepart", NULL };
-#else
-	static const char *part_types[] = { NULL };
-#endif
 	struct device_node *flash_np;
 	struct nand_chip *chip = &ndfc->chip;
+	struct mtd_part_parser_data ppdata;
 	int ret;
 
 	chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
@@ -193,6 +188,7 @@
 	if (!flash_np)
 		return -ENODEV;
 
+	ppdata->of_node = flash_np;
 	ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
 			dev_name(&ndfc->ofdev->dev), flash_np->name);
 	if (!ndfc->mtd.name) {
@@ -204,18 +200,7 @@
 	if (ret)
 		goto err;
 
-	ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
-	if (ret < 0)
-		goto err;
-
-	if (ret == 0) {
-		ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
-					      &ndfc->parts);
-		if (ret < 0)
-			goto err;
-	}
-
-	ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret);
+	ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
 
 err:
 	of_node_put(flash_np);
@@ -288,6 +273,7 @@
 	struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
 
 	nand_release(&ndfc->mtd);
+	kfree(ndfc->mtd.name);
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index b6a5c86..b463ecf 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -187,6 +187,7 @@
 		pdata->exit();
 
 	if (host) {
+		nand_release(&host->mtd);
 		iounmap(host->cmd_va);
 		iounmap(host->data_va);
 		iounmap(host->addr_va);
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 9c30a0b..fa8faed 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -339,6 +339,7 @@
 	struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
 	struct resource *res;
 
+	nand_release(&nuc900_nand->mtd);
 	iounmap(nuc900_nand->reg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0db2c0e..f745f00 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/sched.h>
@@ -94,8 +95,6 @@
 #define P4e_s(a)	(TF(a & NAND_Ecc_P4e)		<< 0)
 #define P4o_s(a)	(TF(a & NAND_Ecc_P4o)		<< 1)
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
 /* Define some generic bad / good block scan pattern which are used
@@ -114,7 +113,6 @@
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
 	struct mtd_info			mtd;
-	struct mtd_partition		*parts;
 	struct nand_chip		nand;
 	struct platform_device		*pdev;
 
@@ -744,12 +742,12 @@
 
 	case 1:
 		/* Uncorrectable error */
-		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+		pr_debug("ECC UNCORRECTED_ERROR 1\n");
 		return -1;
 
 	case 11:
 		/* UN-Correctable error */
-		DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+		pr_debug("ECC UNCORRECTED_ERROR B\n");
 		return -1;
 
 	case 12:
@@ -766,8 +764,8 @@
 
 		find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
 
-		DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
-				"offset: %d, bit: %d\n", find_byte, find_bit);
+		pr_debug("Correcting single bit ECC error at offset: "
+				"%d, bit: %d\n", find_byte, find_bit);
 
 		page_data[find_byte] ^= (1 << find_bit);
 
@@ -779,7 +777,7 @@
 			    ecc_data2[2] == 0)
 				return 0;
 		}
-		DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+		pr_debug("UNCORRECTED_ERROR default\n");
 		return -1;
 	}
 }
@@ -1103,13 +1101,8 @@
 		goto out_release_mem_region;
 	}
 
-	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
-	if (err > 0)
-		mtd_device_register(&info->mtd, info->parts, err);
-	else if (pdata->parts)
-		mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
-	else
-		mtd_device_register(&info->mtd, NULL, 0);
+	mtd_device_parse_register(&info->mtd, NULL, 0,
+			pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, &info->mtd);
 
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 7794d06..29f505ad 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -21,8 +21,6 @@
 #include <mach/hardware.h>
 #include <plat/orion_nand.h>
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *nc = mtd->priv;
@@ -81,8 +79,6 @@
 	struct resource *res;
 	void __iomem *io_base;
 	int ret = 0;
-	struct mtd_partition *partitions = NULL;
-	int num_part = 0;
 
 	nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
 	if (!nc) {
@@ -132,17 +128,9 @@
 		goto no_dev;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
 	mtd->name = "orion_nand";
-	num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
-	/* If cmdline partitions have been passed, let them be used */
-	if (num_part <= 0) {
-		num_part = board->nr_parts;
-		partitions = board->parts;
-	}
-
-	ret = mtd_device_register(mtd, partitions, num_part);
+	ret = mtd_device_parse_register(mtd, NULL, 0,
+			board->parts, board->nr_parts);
 	if (ret) {
 		nand_release(mtd);
 		goto no_dev;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index b1aa41b..a97264e 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -155,7 +155,8 @@
 	chip->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_AUTOINCR;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
 
 	/* Scan to find existence of the device */
 	if (nand_scan(pasemi_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 633c04b..ea8e123 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -21,8 +21,6 @@
 	struct nand_chip	chip;
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
-	int			nr_parts;
-	struct mtd_partition	*parts;
 };
 
 /*
@@ -79,6 +77,7 @@
 	data->chip.read_buf = pdata->ctrl.read_buf;
 	data->chip.chip_delay = pdata->chip.chip_delay;
 	data->chip.options |= pdata->chip.options;
+	data->chip.bbt_options |= pdata->chip.bbt_options;
 
 	data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
 	data->chip.ecc.layout = pdata->chip.ecclayout;
@@ -99,23 +98,9 @@
 		goto out;
 	}
 
-	if (pdata->chip.part_probe_types) {
-		err = parse_mtd_partitions(&data->mtd,
-					pdata->chip.part_probe_types,
-					&data->parts, 0);
-		if (err > 0) {
-			mtd_device_register(&data->mtd, data->parts, err);
-			return 0;
-		}
-	}
-	if (pdata->chip.set_parts)
-		pdata->chip.set_parts(data->mtd.size, &pdata->chip);
-	if (pdata->chip.partitions) {
-		data->parts = pdata->chip.partitions;
-		err = mtd_device_register(&data->mtd, data->parts,
-			pdata->chip.nr_partitions);
-	} else
-		err = mtd_device_register(&data->mtd, NULL, 0);
+	err = mtd_device_parse_register(&data->mtd,
+			pdata->chip.part_probe_types, 0,
+			pdata->chip.partitions, pdata->chip.nr_partitions);
 
 	if (!err)
 		return err;
@@ -145,8 +130,6 @@
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	nand_release(&data->mtd);
-	if (data->parts && data->parts != pdata->chip.partitions)
-		kfree(data->parts);
 	if (pdata->ctrl.remove)
 		pdata->ctrl.remove(pdev);
 	iounmap(data->io_base);
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 3bbb796..7e52af5 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -99,8 +99,6 @@
 
 #define NUM_PARTITIONS 1
 
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-
 /*
  *	hardware specific access to control-lines
  */
@@ -187,18 +185,12 @@
 }
 #endif
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-
 /*
  * Main initialization routine
  */
 static int __init ppchameleonevb_init(void)
 {
 	struct nand_chip *this;
-	const char *part_type = 0;
-	int mtd_parts_nb = 0;
-	struct mtd_partition *mtd_parts = 0;
 	void __iomem *ppchameleon_fio_base;
 	void __iomem *ppchameleonevb_fio_base;
 
@@ -281,24 +273,13 @@
 #endif
 
 	ppchameleon_mtd->name = "ppchameleon-nand";
-	mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-
-	if (mtd_parts_nb == 0) {
-		if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
-			mtd_parts = partition_info_me;
-		else
-			mtd_parts = partition_info_hi;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
 
 	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+	mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
+			ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+				partition_info_me :
+				partition_info_hi,
+			NUM_PARTITIONS);
 
  nand_evb_init:
 	/****************************
@@ -382,21 +363,13 @@
 	}
 
 	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
-	mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
-	if (mtd_parts_nb > 0)
-		part_type = "command line";
-	else
-		mtd_parts_nb = 0;
-
-	if (mtd_parts_nb == 0) {
-		mtd_parts = partition_info_evb;
-		mtd_parts_nb = NUM_PARTITIONS;
-		part_type = "static";
-	}
 
 	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-	mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+	mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
+			ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+				partition_info_me :
+				partition_info_hi,
+			NUM_PARTITIONS);
 
 	/* Return happy */
 	return 0;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 1fb3b3a..9eb7f87 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -110,6 +110,7 @@
 
 enum {
 	STATE_IDLE = 0,
+	STATE_PREPARED,
 	STATE_CMD_HANDLE,
 	STATE_DMA_READING,
 	STATE_DMA_WRITING,
@@ -120,21 +121,40 @@
 	STATE_READY,
 };
 
-struct pxa3xx_nand_info {
-	struct nand_chip	nand_chip;
+struct pxa3xx_nand_host {
+	struct nand_chip	chip;
+	struct pxa3xx_nand_cmdset *cmdset;
+	struct mtd_info         *mtd;
+	void			*info_data;
 
+	/* page size of attached chip */
+	unsigned int		page_size;
+	int			use_ecc;
+	int			cs;
+
+	/* calculated from pxa3xx_nand_flash data */
+	unsigned int		col_addr_cycles;
+	unsigned int		row_addr_cycles;
+	size_t			read_id_bytes;
+
+	/* cached register value */
+	uint32_t		reg_ndcr;
+	uint32_t		ndtr0cs0;
+	uint32_t		ndtr1cs0;
+};
+
+struct pxa3xx_nand_info {
 	struct nand_hw_control	controller;
 	struct platform_device	 *pdev;
-	struct pxa3xx_nand_cmdset *cmdset;
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
 	unsigned long		mmio_phys;
+	struct completion	cmd_complete;
 
 	unsigned int 		buf_start;
 	unsigned int		buf_count;
 
-	struct mtd_info         *mtd;
 	/* DMA information */
 	int			drcmr_dat;
 	int			drcmr_cmd;
@@ -142,44 +162,27 @@
 	unsigned char		*data_buff;
 	unsigned char		*oob_buff;
 	dma_addr_t 		data_buff_phys;
-	size_t			data_buff_size;
 	int 			data_dma_ch;
 	struct pxa_dma_desc	*data_desc;
 	dma_addr_t 		data_desc_addr;
 
-	uint32_t		reg_ndcr;
-
-	/* saved column/page_addr during CMD_SEQIN */
-	int			seqin_column;
-	int			seqin_page_addr;
-
-	/* relate to the command */
+	struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
 	unsigned int		state;
 
+	int			cs;
 	int			use_ecc;	/* use HW ECC ? */
 	int			use_dma;	/* use DMA ? */
 	int			is_ready;
 
 	unsigned int		page_size;	/* page size of attached chip */
 	unsigned int		data_size;	/* data size in FIFO */
+	unsigned int		oob_size;
 	int 			retcode;
-	struct completion 	cmd_complete;
 
 	/* generated NDCBx register values */
 	uint32_t		ndcb0;
 	uint32_t		ndcb1;
 	uint32_t		ndcb2;
-
-	/* timing calcuted from setting */
-	uint32_t		ndtr0cs0;
-	uint32_t		ndtr1cs0;
-
-	/* calculated from pxa3xx_nand_flash data */
-	size_t		oob_size;
-	size_t		read_id_bytes;
-
-	unsigned int	col_addr_cycles;
-	unsigned int	row_addr_cycles;
 };
 
 static int use_dma = 1;
@@ -225,7 +228,7 @@
 /* Define a default flash type setting serve as flash detecting only */
 #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
 
-const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
 
 #define NDTR0_tCH(c)	(min((c), 7) << 19)
 #define NDTR0_tCS(c)	(min((c), 7) << 16)
@@ -241,9 +244,10 @@
 /* convert nano-seconds to nand flash controller clock cycles */
 #define ns2cycle(ns, clk)	(int)((ns) * (clk / 1000000) / 1000)
 
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
 				   const struct pxa3xx_nand_timing *t)
 {
+	struct pxa3xx_nand_info *info = host->info_data;
 	unsigned long nand_clk = clk_get_rate(info->clk);
 	uint32_t ndtr0, ndtr1;
 
@@ -258,23 +262,24 @@
 		NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
 		NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
 
-	info->ndtr0cs0 = ndtr0;
-	info->ndtr1cs0 = ndtr1;
+	host->ndtr0cs0 = ndtr0;
+	host->ndtr1cs0 = ndtr1;
 	nand_writel(info, NDTR0CS0, ndtr0);
 	nand_writel(info, NDTR1CS0, ndtr1);
 }
 
 static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
 {
-	int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+	struct pxa3xx_nand_host *host = info->host[info->cs];
+	int oob_enable = host->reg_ndcr & NDCR_SPARE_EN;
 
-	info->data_size = info->page_size;
+	info->data_size = host->page_size;
 	if (!oob_enable) {
 		info->oob_size = 0;
 		return;
 	}
 
-	switch (info->page_size) {
+	switch (host->page_size) {
 	case 2048:
 		info->oob_size = (info->use_ecc) ? 40 : 64;
 		break;
@@ -292,9 +297,10 @@
  */
 static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
 {
+	struct pxa3xx_nand_host *host = info->host[info->cs];
 	uint32_t ndcr;
 
-	ndcr = info->reg_ndcr;
+	ndcr = host->reg_ndcr;
 	ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
 	ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
 	ndcr |= NDCR_ND_RUN;
@@ -359,7 +365,7 @@
 					DIV_ROUND_UP(info->oob_size, 4));
 		break;
 	default:
-		printk(KERN_ERR "%s: invalid state %d\n", __func__,
+		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
 				info->state);
 		BUG();
 	}
@@ -385,7 +391,7 @@
 		desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
 		break;
 	default:
-		printk(KERN_ERR "%s: invalid state %d\n", __func__,
+		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
 				info->state);
 		BUG();
 	}
@@ -416,6 +422,15 @@
 {
 	struct pxa3xx_nand_info *info = devid;
 	unsigned int status, is_completed = 0;
+	unsigned int ready, cmd_done;
+
+	if (info->cs == 0) {
+		ready           = NDSR_FLASH_RDY;
+		cmd_done        = NDSR_CS0_CMDD;
+	} else {
+		ready           = NDSR_RDY;
+		cmd_done        = NDSR_CS1_CMDD;
+	}
 
 	status = nand_readl(info, NDSR);
 
@@ -437,11 +452,11 @@
 			handle_data_pio(info);
 		}
 	}
-	if (status & NDSR_CS0_CMDD) {
+	if (status & cmd_done) {
 		info->state = STATE_CMD_DONE;
 		is_completed = 1;
 	}
-	if (status & NDSR_FLASH_RDY) {
+	if (status & ready) {
 		info->is_ready = 1;
 		info->state = STATE_READY;
 	}
@@ -463,12 +478,6 @@
 	return IRQ_HANDLED;
 }
 
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
-	struct pxa3xx_nand_info *info = mtd->priv;
-	return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
-}
-
 static inline int is_buf_blank(uint8_t *buf, size_t len)
 {
 	for (; len > 0; len--)
@@ -481,10 +490,12 @@
 		uint16_t column, int page_addr)
 {
 	uint16_t cmd;
-	int addr_cycle, exec_cmd, ndcb0;
-	struct mtd_info *mtd = info->mtd;
+	int addr_cycle, exec_cmd;
+	struct pxa3xx_nand_host *host;
+	struct mtd_info *mtd;
 
-	ndcb0 = 0;
+	host = info->host[info->cs];
+	mtd = host->mtd;
 	addr_cycle = 0;
 	exec_cmd = 1;
 
@@ -495,6 +506,10 @@
 	info->use_ecc		= 0;
 	info->is_ready		= 0;
 	info->retcode		= ERR_NONE;
+	if (info->cs != 0)
+		info->ndcb0 = NDCB0_CSEL;
+	else
+		info->ndcb0 = 0;
 
 	switch (command) {
 	case NAND_CMD_READ0:
@@ -512,20 +527,19 @@
 		break;
 	}
 
-	info->ndcb0 = ndcb0;
-	addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
-				    + info->col_addr_cycles);
+	addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+				    + host->col_addr_cycles);
 
 	switch (command) {
 	case NAND_CMD_READOOB:
 	case NAND_CMD_READ0:
-		cmd = info->cmdset->read1;
+		cmd = host->cmdset->read1;
 		if (command == NAND_CMD_READOOB)
 			info->buf_start = mtd->writesize + column;
 		else
 			info->buf_start = column;
 
-		if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
+		if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
 			info->ndcb0 |= NDCB0_CMD_TYPE(0)
 					| addr_cycle
 					| (cmd & NDCB0_CMD1_MASK);
@@ -537,7 +551,7 @@
 
 	case NAND_CMD_SEQIN:
 		/* small page addr setting */
-		if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
+		if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
 			info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
 					| (column & 0xFF);
 
@@ -564,7 +578,7 @@
 			break;
 		}
 
-		cmd = info->cmdset->program;
+		cmd = host->cmdset->program;
 		info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
 				| NDCB0_AUTO_RS
 				| NDCB0_ST_ROW_EN
@@ -574,8 +588,8 @@
 		break;
 
 	case NAND_CMD_READID:
-		cmd = info->cmdset->read_id;
-		info->buf_count = info->read_id_bytes;
+		cmd = host->cmdset->read_id;
+		info->buf_count = host->read_id_bytes;
 		info->ndcb0 |= NDCB0_CMD_TYPE(3)
 				| NDCB0_ADDR_CYC(1)
 				| cmd;
@@ -583,7 +597,7 @@
 		info->data_size = 8;
 		break;
 	case NAND_CMD_STATUS:
-		cmd = info->cmdset->read_status;
+		cmd = host->cmdset->read_status;
 		info->buf_count = 1;
 		info->ndcb0 |= NDCB0_CMD_TYPE(4)
 				| NDCB0_ADDR_CYC(1)
@@ -593,7 +607,7 @@
 		break;
 
 	case NAND_CMD_ERASE1:
-		cmd = info->cmdset->erase;
+		cmd = host->cmdset->erase;
 		info->ndcb0 |= NDCB0_CMD_TYPE(2)
 				| NDCB0_AUTO_RS
 				| NDCB0_ADDR_CYC(3)
@@ -604,7 +618,7 @@
 
 		break;
 	case NAND_CMD_RESET:
-		cmd = info->cmdset->reset;
+		cmd = host->cmdset->reset;
 		info->ndcb0 |= NDCB0_CMD_TYPE(5)
 				| cmd;
 
@@ -616,8 +630,8 @@
 
 	default:
 		exec_cmd = 0;
-		printk(KERN_ERR "pxa3xx-nand: non-supported"
-			" command %x\n", command);
+		dev_err(&info->pdev->dev, "non-supported command %x\n",
+				command);
 		break;
 	}
 
@@ -627,7 +641,8 @@
 static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 				int column, int page_addr)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	int ret, exec_cmd;
 
 	/*
@@ -635,9 +650,21 @@
 	 * "byte" address into a "word" address appropriate
 	 * for indexing a word-oriented device
 	 */
-	if (info->reg_ndcr & NDCR_DWIDTH_M)
+	if (host->reg_ndcr & NDCR_DWIDTH_M)
 		column /= 2;
 
+	/*
+	 * There may be different NAND chip hooked to
+	 * different chip select, so check whether
+	 * chip select has been changed, if yes, reset the timing
+	 */
+	if (info->cs != host->cs) {
+		info->cs = host->cs;
+		nand_writel(info, NDTR0CS0, host->ndtr0cs0);
+		nand_writel(info, NDTR1CS0, host->ndtr1cs0);
+	}
+
+	info->state = STATE_PREPARED;
 	exec_cmd = prepare_command_pool(info, command, column, page_addr);
 	if (exec_cmd) {
 		init_completion(&info->cmd_complete);
@@ -646,12 +673,12 @@
 		ret = wait_for_completion_timeout(&info->cmd_complete,
 				CHIP_DELAY_TIMEOUT);
 		if (!ret) {
-			printk(KERN_ERR "Wait time out!!!\n");
+			dev_err(&info->pdev->dev, "Wait time out!!!\n");
 			/* Stop State Machine for next command cycle */
 			pxa3xx_nand_stop(info);
 		}
-		info->state = STATE_IDLE;
 	}
+	info->state = STATE_IDLE;
 }
 
 static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
@@ -664,7 +691,8 @@
 static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
 		struct nand_chip *chip, uint8_t *buf, int page)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 
 	chip->read_buf(mtd, buf, mtd->writesize);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -685,6 +713,8 @@
 		 * OOB, ignore such double bit errors
 		 */
 		if (is_buf_blank(buf, mtd->writesize))
+			info->retcode = ERR_NONE;
+		else
 			mtd->ecc_stats.failed++;
 	}
 
@@ -693,7 +723,8 @@
 
 static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	char retval = 0xFF;
 
 	if (info->buf_start < info->buf_count)
@@ -705,7 +736,8 @@
 
 static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	u16 retval = 0xFFFF;
 
 	if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
@@ -717,7 +749,8 @@
 
 static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
 
 	memcpy(buf, info->data_buff + info->buf_start, real_len);
@@ -727,7 +760,8 @@
 static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
 		const uint8_t *buf, int len)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
 
 	memcpy(info->data_buff + info->buf_start, buf, real_len);
@@ -747,7 +781,8 @@
 
 static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 
 	/* pxa3xx_nand_send_command has waited for command complete */
 	if (this->state == FL_WRITING || this->state == FL_ERASING) {
@@ -770,54 +805,70 @@
 {
 	struct platform_device *pdev = info->pdev;
 	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+	struct pxa3xx_nand_host *host = info->host[info->cs];
 	uint32_t ndcr = 0x0; /* enable all interrupts */
 
-	if (f->page_size != 2048 && f->page_size != 512)
+	if (f->page_size != 2048 && f->page_size != 512) {
+		dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
 		return -EINVAL;
+	}
 
-	if (f->flash_width != 16 && f->flash_width != 8)
+	if (f->flash_width != 16 && f->flash_width != 8) {
+		dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
 		return -EINVAL;
+	}
 
 	/* calculate flash information */
-	info->cmdset = &default_cmdset;
-	info->page_size = f->page_size;
-	info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+	host->cmdset = &default_cmdset;
+	host->page_size = f->page_size;
+	host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
 
 	/* calculate addressing information */
-	info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+	host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
 
 	if (f->num_blocks * f->page_per_block > 65536)
-		info->row_addr_cycles = 3;
+		host->row_addr_cycles = 3;
 	else
-		info->row_addr_cycles = 2;
+		host->row_addr_cycles = 2;
 
 	ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
-	ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+	ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
 	ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
 	ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
 	ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
 	ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
 
-	ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+	ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
 	ndcr |= NDCR_SPARE_EN; /* enable spare by default */
 
-	info->reg_ndcr = ndcr;
+	host->reg_ndcr = ndcr;
 
-	pxa3xx_nand_set_timing(info, f->timing);
+	pxa3xx_nand_set_timing(host, f->timing);
 	return 0;
 }
 
 static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 {
+	/*
+	 * We set 0 by hard coding here, for we don't support keep_config
+	 * when there is more than one chip attached to the controller
+	 */
+	struct pxa3xx_nand_host *host = info->host[0];
 	uint32_t ndcr = nand_readl(info, NDCR);
-	info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
-	/* set info fields needed to read id */
-	info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
-	info->reg_ndcr = ndcr;
-	info->cmdset = &default_cmdset;
 
-	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
-	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+	if (ndcr & NDCR_PAGE_SZ) {
+		host->page_size = 2048;
+		host->read_id_bytes = 4;
+	} else {
+		host->page_size = 512;
+		host->read_id_bytes = 2;
+	}
+
+	host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+	host->cmdset = &default_cmdset;
+
+	host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+	host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
 
 	return 0;
 }
@@ -847,7 +898,6 @@
 		return -ENOMEM;
 	}
 
-	info->data_buff_size = MAX_BUFF_SIZE;
 	info->data_desc = (void *)info->data_buff + data_desc_offset;
 	info->data_desc_addr = info->data_buff_phys + data_desc_offset;
 
@@ -855,7 +905,7 @@
 				pxa3xx_nand_data_dma_irq, info);
 	if (info->data_dma_ch < 0) {
 		dev_err(&pdev->dev, "failed to request data dma\n");
-		dma_free_coherent(&pdev->dev, info->data_buff_size,
+		dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
 				info->data_buff, info->data_buff_phys);
 		return info->data_dma_ch;
 	}
@@ -865,24 +915,28 @@
 
 static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
 {
-	struct mtd_info *mtd = info->mtd;
-	struct nand_chip *chip = mtd->priv;
-
+	struct mtd_info *mtd;
+	int ret;
+	mtd = info->host[info->cs]->mtd;
 	/* use the common timing to make a try */
-	pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
-	chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+	ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+	if (ret)
+		return ret;
+
+	pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
 	if (info->is_ready)
-		return 1;
-	else
 		return 0;
+
+	return -ENODEV;
 }
 
 static int pxa3xx_nand_scan(struct mtd_info *mtd)
 {
-	struct pxa3xx_nand_info *info = mtd->priv;
+	struct pxa3xx_nand_host *host = mtd->priv;
+	struct pxa3xx_nand_info *info = host->info_data;
 	struct platform_device *pdev = info->pdev;
 	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
-	struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+	struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
 	const struct pxa3xx_nand_flash *f = NULL;
 	struct nand_chip *chip = mtd->priv;
 	uint32_t id = -1;
@@ -893,22 +947,20 @@
 		goto KEEP_CONFIG;
 
 	ret = pxa3xx_nand_sensing(info);
-	if (!ret) {
-		kfree(mtd);
-		info->mtd = NULL;
-		printk(KERN_INFO "There is no nand chip on cs 0!\n");
+	if (ret) {
+		dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+			 info->cs);
 
-		return -EINVAL;
+		return ret;
 	}
 
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
 	id = *((uint16_t *)(info->data_buff));
 	if (id != 0)
-		printk(KERN_INFO "Detect a flash id %x\n", id);
+		dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
 	else {
-		kfree(mtd);
-		info->mtd = NULL;
-		printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+		dev_warn(&info->pdev->dev,
+			 "Read out ID 0, potential timing set wrong!!\n");
 
 		return -EINVAL;
 	}
@@ -926,14 +978,17 @@
 	}
 
 	if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
-		kfree(mtd);
-		info->mtd = NULL;
-		printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+		dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
 
 		return -EINVAL;
 	}
 
-	pxa3xx_nand_config_flash(info, f);
+	ret = pxa3xx_nand_config_flash(info, f);
+	if (ret) {
+		dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+		return ret;
+	}
+
 	pxa3xx_flash_ids[0].name = f->name;
 	pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
 	pxa3xx_flash_ids[0].pagesize = f->page_size;
@@ -942,62 +997,78 @@
 	pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
 	if (f->flash_width == 16)
 		pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+	pxa3xx_flash_ids[1].name = NULL;
+	def = pxa3xx_flash_ids;
 KEEP_CONFIG:
-	if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.size = host->page_size;
+
+	chip->options = NAND_NO_AUTOINCR;
+	chip->options |= NAND_NO_READRDY;
+	if (host->reg_ndcr & NDCR_DWIDTH_M)
+		chip->options |= NAND_BUSWIDTH_16;
+
+	if (nand_scan_ident(mtd, 1, def))
 		return -ENODEV;
 	/* calculate addressing information */
-	info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
+	if (mtd->writesize >= 2048)
+		host->col_addr_cycles = 2;
+	else
+		host->col_addr_cycles = 1;
+
 	info->oob_buff = info->data_buff + mtd->writesize;
 	if ((mtd->size >> chip->page_shift) > 65536)
-		info->row_addr_cycles = 3;
+		host->row_addr_cycles = 3;
 	else
-		info->row_addr_cycles = 2;
+		host->row_addr_cycles = 2;
+
 	mtd->name = mtd_names[0];
-	chip->ecc.mode = NAND_ECC_HW;
-	chip->ecc.size = f->page_size;
-
-	chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
-	chip->options |= NAND_NO_AUTOINCR;
-	chip->options |= NAND_NO_READRDY;
-
 	return nand_scan_tail(mtd);
 }
 
-static
-struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
+static int alloc_nand_resource(struct platform_device *pdev)
 {
+	struct pxa3xx_nand_platform_data *pdata;
 	struct pxa3xx_nand_info *info;
+	struct pxa3xx_nand_host *host;
 	struct nand_chip *chip;
 	struct mtd_info *mtd;
 	struct resource *r;
-	int ret, irq;
+	int ret, irq, cs;
 
-	mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
-			GFP_KERNEL);
-	if (!mtd) {
+	pdata = pdev->dev.platform_data;
+	info = kzalloc(sizeof(*info) + (sizeof(*mtd) +
+		       sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+	if (!info) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return NULL;
+		return -ENOMEM;
 	}
 
-	info = (struct pxa3xx_nand_info *)(&mtd[1]);
-	chip = (struct nand_chip *)(&mtd[1]);
 	info->pdev = pdev;
-	info->mtd = mtd;
-	mtd->priv = info;
-	mtd->owner = THIS_MODULE;
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = (struct mtd_info *)((unsigned int)&info[1] +
+		      (sizeof(*mtd) + sizeof(*host)) * cs);
+		chip = (struct nand_chip *)(&mtd[1]);
+		host = (struct pxa3xx_nand_host *)chip;
+		info->host[cs] = host;
+		host->mtd = mtd;
+		host->cs = cs;
+		host->info_data = info;
+		mtd->priv = host;
+		mtd->owner = THIS_MODULE;
 
-	chip->ecc.read_page	= pxa3xx_nand_read_page_hwecc;
-	chip->ecc.write_page	= pxa3xx_nand_write_page_hwecc;
-	chip->controller        = &info->controller;
-	chip->waitfunc		= pxa3xx_nand_waitfunc;
-	chip->select_chip	= pxa3xx_nand_select_chip;
-	chip->dev_ready		= pxa3xx_nand_dev_ready;
-	chip->cmdfunc		= pxa3xx_nand_cmdfunc;
-	chip->read_word		= pxa3xx_nand_read_word;
-	chip->read_byte		= pxa3xx_nand_read_byte;
-	chip->read_buf		= pxa3xx_nand_read_buf;
-	chip->write_buf		= pxa3xx_nand_write_buf;
-	chip->verify_buf	= pxa3xx_nand_verify_buf;
+		chip->ecc.read_page	= pxa3xx_nand_read_page_hwecc;
+		chip->ecc.write_page	= pxa3xx_nand_write_page_hwecc;
+		chip->controller        = &info->controller;
+		chip->waitfunc		= pxa3xx_nand_waitfunc;
+		chip->select_chip	= pxa3xx_nand_select_chip;
+		chip->cmdfunc		= pxa3xx_nand_cmdfunc;
+		chip->read_word		= pxa3xx_nand_read_word;
+		chip->read_byte		= pxa3xx_nand_read_byte;
+		chip->read_buf		= pxa3xx_nand_read_buf;
+		chip->write_buf		= pxa3xx_nand_write_buf;
+		chip->verify_buf	= pxa3xx_nand_verify_buf;
+	}
 
 	spin_lock_init(&chip->controller->lock);
 	init_waitqueue_head(&chip->controller->wq);
@@ -1070,13 +1141,13 @@
 
 	platform_set_drvdata(pdev, info);
 
-	return info;
+	return 0;
 
 fail_free_buf:
 	free_irq(irq, info);
 	if (use_dma) {
 		pxa_free_dma(info->data_dma_ch);
-		dma_free_coherent(&pdev->dev, info->data_buff_size,
+		dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
 			info->data_buff, info->data_buff_phys);
 	} else
 		kfree(info->data_buff);
@@ -1088,17 +1159,21 @@
 	clk_disable(info->clk);
 	clk_put(info->clk);
 fail_free_mtd:
-	kfree(mtd);
-	return NULL;
+	kfree(info);
+	return ret;
 }
 
 static int pxa3xx_nand_remove(struct platform_device *pdev)
 {
 	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = info->mtd;
+	struct pxa3xx_nand_platform_data *pdata;
 	struct resource *r;
-	int irq;
+	int irq, cs;
 
+	if (!info)
+		return 0;
+
+	pdata = pdev->dev.platform_data;
 	platform_set_drvdata(pdev, NULL);
 
 	irq = platform_get_irq(pdev, 0);
@@ -1106,7 +1181,7 @@
 		free_irq(irq, info);
 	if (use_dma) {
 		pxa_free_dma(info->data_dma_ch);
-		dma_free_writecombine(&pdev->dev, info->data_buff_size,
+		dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
 				info->data_buff, info->data_buff_phys);
 	} else
 		kfree(info->data_buff);
@@ -1118,10 +1193,9 @@
 	clk_disable(info->clk);
 	clk_put(info->clk);
 
-	if (mtd) {
-		mtd_device_unregister(mtd);
-		kfree(mtd);
-	}
+	for (cs = 0; cs < pdata->num_cs; cs++)
+		nand_release(info->host[cs]->mtd);
+	kfree(info);
 	return 0;
 }
 
@@ -1129,6 +1203,7 @@
 {
 	struct pxa3xx_nand_platform_data *pdata;
 	struct pxa3xx_nand_info *info;
+	int ret, cs, probe_success;
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata) {
@@ -1136,52 +1211,88 @@
 		return -ENODEV;
 	}
 
-	info = alloc_nand_resource(pdev);
-	if (info == NULL)
-		return -ENOMEM;
+	ret = alloc_nand_resource(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "alloc nand resource failed\n");
+		return ret;
+	}
 
-	if (pxa3xx_nand_scan(info->mtd)) {
-		dev_err(&pdev->dev, "failed to scan nand\n");
+	info = platform_get_drvdata(pdev);
+	probe_success = 0;
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		info->cs = cs;
+		ret = pxa3xx_nand_scan(info->host[cs]->mtd);
+		if (ret) {
+			dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+				cs);
+			continue;
+		}
+
+		ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
+				pdata->parts[cs], pdata->nr_parts[cs]);
+		if (!ret)
+			probe_success = 1;
+	}
+
+	if (!probe_success) {
 		pxa3xx_nand_remove(pdev);
 		return -ENODEV;
 	}
 
-	if (mtd_has_cmdlinepart()) {
-		const char *probes[] = { "cmdlinepart", NULL };
-		struct mtd_partition *parts;
-		int nr_parts;
-
-		nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
-
-		if (nr_parts)
-			return mtd_device_register(info->mtd, parts, nr_parts);
-	}
-
-	return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
+	return 0;
 }
 
 #ifdef CONFIG_PM
 static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = info->mtd;
+	struct pxa3xx_nand_platform_data *pdata;
+	struct mtd_info *mtd;
+	int cs;
 
+	pdata = pdev->dev.platform_data;
 	if (info->state) {
 		dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
 		return -EAGAIN;
 	}
 
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = info->host[cs]->mtd;
+		mtd->suspend(mtd);
+	}
+
 	return 0;
 }
 
 static int pxa3xx_nand_resume(struct platform_device *pdev)
 {
 	struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = info->mtd;
+	struct pxa3xx_nand_platform_data *pdata;
+	struct mtd_info *mtd;
+	int cs;
 
-	nand_writel(info, NDTR0CS0, info->ndtr0cs0);
-	nand_writel(info, NDTR1CS0, info->ndtr1cs0);
-	clk_enable(info->clk);
+	pdata = pdev->dev.platform_data;
+	/* We don't want to handle interrupt without calling mtd routine */
+	disable_int(info, NDCR_INT_MASK);
+
+	/*
+	 * Directly set the chip select to a invalid value,
+	 * then the driver would reset the timing according
+	 * to current chip select at the beginning of cmdfunc
+	 */
+	info->cs = 0xff;
+
+	/*
+	 * As the spec says, the NDSR would be updated to 0x1800 when
+	 * doing the nand_clk disable/enable.
+	 * To prevent it damaging state machine of the driver, clear
+	 * all status before resume
+	 */
+	nand_writel(info, NDSR, NDSR_MASK);
+	for (cs = 0; cs < pdata->num_cs; cs++) {
+		mtd = info->host[cs]->mtd;
+		mtd->resume(mtd);
+	}
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index cae2e01..f20f393 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -1027,7 +1027,7 @@
 }
 
 #ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+static int r852_suspend(struct device *device)
 {
 	struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
 
@@ -1048,7 +1048,7 @@
 	return 0;
 }
 
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
 {
 	struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
 
@@ -1092,7 +1092,7 @@
 
 MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
 
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
 
 static struct pci_driver r852_pci_driver = {
 	.name		= DRV_NAME,
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index c9f9127..f309add 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -351,7 +351,7 @@
 		return 0;
 	}
 
-	/* Read the syndrom pattern from the FPGA and correct the bitorder */
+	/* Read the syndrome pattern from the FPGA and correct the bitorder */
 	rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
 	for (i = 0; i < 8; i++) {
 		ecc[i] = bitrev8(*rs_ecc);
@@ -380,7 +380,7 @@
 	/* Let the library code do its magic. */
 	res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
 	if (res > 0) {
-		DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
+		pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
 	}
 	return res;
 }
@@ -444,7 +444,6 @@
 		len = mtd->writesize;
 		buf = kmalloc(len, GFP_KERNEL);
 		if (!buf) {
-			printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
 			er_stat = 1;
 			goto out;
 		}
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 4405468..868685d 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -723,7 +723,7 @@
 
 	/* free the common resources */
 
-	if (info->clk != NULL && !IS_ERR(info->clk)) {
+	if (!IS_ERR(info->clk)) {
 		s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
 		clk_put(info->clk);
 	}
@@ -744,26 +744,15 @@
 	return 0;
 }
 
-const char *part_probes[] = { "cmdlinepart", NULL };
 static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 				      struct s3c2410_nand_mtd *mtd,
 				      struct s3c2410_nand_set *set)
 {
-	struct mtd_partition *part_info;
-	int nr_part = 0;
+	if (set)
+		mtd->mtd.name = set->name;
 
-	if (set == NULL)
-		return mtd_device_register(&mtd->mtd, NULL, 0);
-
-	mtd->mtd.name = set->name;
-	nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
-
-	if (nr_part <= 0 && set->nr_partitions > 0) {
-		nr_part = set->nr_partitions;
-		part_info = set->partitions;
-	}
-
-	return mtd_device_register(&mtd->mtd, part_info, nr_part);
+	return mtd_device_parse_register(&mtd->mtd, NULL, 0,
+			set->partitions, set->nr_partitions);
 }
 
 /**
@@ -880,8 +869,10 @@
 	/* If you use u-boot BBT creation code, specifying this flag will
 	 * let the kernel fish out the BBT from the NAND, and also skip the
 	 * full NAND scan that can take 1/2s or so. Little things... */
-	if (set->flash_bbt)
-		chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+	if (set->flash_bbt) {
+		chip->bbt_options |= NAND_BBT_USE_FLASH;
+		chip->options |= NAND_SKIP_BBTSCAN;
+	}
 }
 
 /**
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 19e24ed..619d2a5 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -103,16 +103,12 @@
 	return readb(sharpsl->io + ECCCNTR) != 0;
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 /*
  * Main initialization routine
  */
 static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this;
-	struct mtd_partition *sharpsl_partition_info;
-	int nr_partitions;
 	struct resource *r;
 	int err = 0;
 	struct sharpsl_nand *sharpsl;
@@ -184,14 +180,9 @@
 
 	/* Register the partitions */
 	sharpsl->mtd.name = "sharpsl-nand";
-	nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
-	if (nr_partitions <= 0) {
-		nr_partitions = data->nr_partitions;
-		sharpsl_partition_info = data->partitions;
-	}
 
-	err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info,
-				  nr_partitions);
+	err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
+			data->partitions, data->nr_partitions);
 	if (err)
 		goto err_add;
 
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index b6332e8..32ae5af 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -8,6 +8,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/mtd/nand.h>
+#include <linux/module.h>
 #include "sm_common.h"
 
 static struct nand_ecclayout nand_oob_sm = {
@@ -47,7 +48,7 @@
 
 	/* As long as this function is called on erase block boundaries
 		it will work correctly for 256 byte nand */
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = (void *)&oob;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index ca2d055..0fb24f9 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -155,8 +155,6 @@
 	return 1;
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 /*
  * Probe for the NAND device.
  */
@@ -166,8 +164,7 @@
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
 	int res;
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
+	struct mtd_part_parser_data ppdata;
 
 	/* Allocate memory for the device structure (and zero it) */
 	host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
@@ -193,6 +190,7 @@
 	mtd->name = "socrates_nand";
 	mtd->owner = THIS_MODULE;
 	mtd->dev.parent = &ofdev->dev;
+	ppdata.of_node = ofdev->dev.of_node;
 
 	/*should never be accessed directly */
 	nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
@@ -225,30 +223,10 @@
 		goto out;
 	}
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-	if (num_partitions < 0) {
-		res = num_partitions;
-		goto release;
-	}
-#endif
-
-	if (num_partitions == 0) {
-		num_partitions = of_mtd_parse_partitions(&ofdev->dev,
-							 ofdev->dev.of_node,
-							 &partitions);
-		if (num_partitions < 0) {
-			res = num_partitions;
-			goto release;
-		}
-	}
-
-	res = mtd_device_register(mtd, partitions, num_partitions);
+	res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (!res)
 		return res;
 
-release:
 	nand_release(mtd);
 
 out:
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 11e8371..beebd95 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -121,9 +121,6 @@
 
 #define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
 
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
 
 /*--------------------------------------------------------------------------*/
 
@@ -381,8 +378,6 @@
 	struct tmio_nand *tmio;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
-	struct mtd_partition *parts;
-	int nbparts = 0;
 	int retval;
 
 	if (data == NULL)
@@ -461,15 +456,9 @@
 		goto err_scan;
 	}
 	/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
-	if (nbparts <= 0 && data) {
-		parts = data->partition;
-		nbparts = data->num_partitions;
-	}
-
-	retval = mtd_device_register(mtd, parts, nbparts);
+	retval = mtd_device_parse_register(mtd, NULL, 0,
+			data ? data->partition : NULL,
+			data ? data->num_partitions : 0);
 	if (!retval)
 		return retval;
 
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index bfba4e3..ace46fd 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -74,7 +74,6 @@
 	unsigned char hold;	/* in gbusclock */
 	unsigned char spw;	/* in gbusclock */
 	struct nand_hw_control hw_control;
-	struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
 };
 
 static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
@@ -287,7 +286,6 @@
 static int __init txx9ndfmc_probe(struct platform_device *dev)
 {
 	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
-	static const char *probes[] = { "cmdlinepart", NULL };
 	int hold, spw;
 	int i;
 	struct txx9ndfmc_drvdata *drvdata;
@@ -333,7 +331,6 @@
 		struct txx9ndfmc_priv *txx9_priv;
 		struct nand_chip *chip;
 		struct mtd_info *mtd;
-		int nr_parts;
 
 		if (!(plat->ch_mask & (1 << i)))
 			continue;
@@ -393,9 +390,7 @@
 		}
 		mtd->name = txx9_priv->mtdname;
 
-		nr_parts = parse_mtd_partitions(mtd, probes,
-						&drvdata->parts[i], 0);
-		mtd_device_register(mtd, drvdata->parts[i], nr_parts);
+		mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
 		drvdata->mtds[i] = mtd;
 	}
 
@@ -421,7 +416,6 @@
 		txx9_priv = chip->priv;
 
 		nand_release(mtd);
-		kfree(drvdata->parts[i]);
 		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index b155666..cda77b5 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -63,14 +63,12 @@
 		return;
 	}
 
-	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name);
+	pr_debug("NFTL: add_mtd for %s\n", mtd->name);
 
 	nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL);
 
-	if (!nftl) {
-		printk(KERN_WARNING "NFTL: out of memory for data structures\n");
+	if (!nftl)
 		return;
-	}
 
 	nftl->mbd.mtd = mtd;
 	nftl->mbd.devnum = -1;
@@ -132,7 +130,7 @@
 {
 	struct NFTLrecord *nftl = (void *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("NFTL: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 	kfree(nftl->ReplUnitTable);
@@ -149,7 +147,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
@@ -170,7 +168,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = len;
 	ops.oobbuf = buf;
@@ -193,7 +191,7 @@
 	struct mtd_oob_ops ops;
 	int res;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooboffs = offs & mask;
 	ops.ooblen = mtd->oobsize;
 	ops.oobbuf = oob;
@@ -220,7 +218,7 @@
 
 	/* Normally, we force a fold to happen before we run out of free blocks completely */
 	if (!desperate && nftl->numfreeEUNs < 2) {
-		DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
+		pr_debug("NFTL_findfreeblock: there are too few free EUNs\n");
 		return BLOCK_NIL;
 	}
 
@@ -291,8 +289,7 @@
 			if (block == 2) {
 				foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1;
 				if (foldmark == FOLD_MARK_IN_PROGRESS) {
-					DEBUG(MTD_DEBUG_LEVEL1,
-					      "Write Inhibited on EUN %d\n", thisEUN);
+					pr_debug("Write Inhibited on EUN %d\n", thisEUN);
 					inplace = 0;
 				} else {
 					/* There's no other reason not to do inplace,
@@ -357,7 +354,7 @@
 			if (BlockLastState[block] != SECTOR_FREE &&
 			    BlockMap[block] != BLOCK_NIL &&
 			    BlockMap[block] != targetEUN) {
-				DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, "
+				pr_debug("Setting inplace to 0. VUC %d, "
 				      "block %d was %x lastEUN, "
 				      "and is in EUN %d (%s) %d\n",
 				      thisVUC, block, BlockLastState[block],
@@ -373,14 +370,14 @@
 		    pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) &&
 		    BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] !=
 		    SECTOR_FREE) {
-			DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. "
+			pr_debug("Pending write not free in EUN %d. "
 			      "Folding out of place.\n", targetEUN);
 			inplace = 0;
 		}
 	}
 
 	if (!inplace) {
-		DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. "
+		pr_debug("Cannot fold Virtual Unit Chain %d in place. "
 		      "Trying out-of-place\n", thisVUC);
 		/* We need to find a targetEUN to fold into. */
 		targetEUN = NFTL_findfreeblock(nftl, 1);
@@ -410,7 +407,7 @@
 	   and the Erase Unit into which we are supposed to be copying.
 	   Go for it.
 	*/
-	DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN);
+	pr_debug("Folding chain %d into unit %d\n", thisVUC, targetEUN);
 	for (block = 0; block < nftl->EraseSize / 512 ; block++) {
 		unsigned char movebuf[512];
 		int ret;
@@ -428,7 +425,7 @@
 
 		ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512),
 				512, &retlen, movebuf);
-		if (ret < 0 && ret != -EUCLEAN) {
+		if (ret < 0 && !mtd_is_bitflip(ret)) {
 			ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block])
 					+ (block * 512), 512, &retlen,
 					movebuf);
@@ -457,7 +454,7 @@
 	   has duplicate chains, we need to free one of the chains because it's not necessary any more.
 	*/
 	thisEUN = nftl->EUNtable[thisVUC];
-	DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n");
+	pr_debug("Want to erase\n");
 
 	/* For each block in the old chain (except the targetEUN of course),
 	   free it and make it available for future use */
@@ -570,7 +567,7 @@
 				      (writeEUN * nftl->EraseSize) + blockofs,
 				      8, &retlen, (char *)&bci);
 
-			DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n",
+			pr_debug("Status of block %d in EUN %d is %x\n",
 			      block , writeEUN, le16_to_cpu(bci.Status));
 
 			status = bci.Status | bci.Status1;
@@ -623,7 +620,7 @@
 				   but they are reserved for when we're
 				   desperate. Well, now we're desperate.
 				*/
-				DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
+				pr_debug("Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC);
 				writeEUN = NFTL_findfreeblock(nftl, 1);
 			}
 			if (writeEUN == BLOCK_NIL) {
@@ -776,7 +773,7 @@
 		size_t retlen;
 		int res = mtd->read(mtd, ptr, 512, &retlen, buffer);
 
-		if (res < 0 && res != -EUCLEAN)
+		if (res < 0 && !mtd_is_bitflip(res))
 			return -EIO;
 	}
 	return 0;
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index e3cd1ff..ac40925 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -32,7 +32,7 @@
 
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *	various device information of the NFTL partition and Bad Unit Table. Update
- *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
+ *	the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[]
  *	is used for management of Erase Unit in other routines in nftl.c and nftlmount.c
  */
 static int find_boot_record(struct NFTLrecord *nftl)
@@ -297,7 +297,7 @@
  *
  * Return: 0 when succeed, -1 on error.
  *
- *  ToDo: 1. Is it neceressary to check_free_sector after erasing ??
+ *  ToDo: 1. Is it necessary to check_free_sector after erasing ??
  */
 int NFTL_formatblock(struct NFTLrecord *nftl, int block)
 {
@@ -337,7 +337,7 @@
 		nb_erases = le32_to_cpu(uci.WearInfo);
 		nb_erases++;
 
-		/* wrap (almost impossible with current flashs) or free block */
+		/* wrap (almost impossible with current flash) or free block */
 		if (nb_erases == 0)
 			nb_erases = 1;
 
@@ -363,10 +363,10 @@
  *	Mark as 'IGNORE' each incorrect sector. This check is only done if the chain
  *	was being folded when NFTL was interrupted.
  *
- *	The check_free_sectors in this function is neceressary. There is a possible
+ *	The check_free_sectors in this function is necessary. There is a possible
  *	situation that after writing the Data area, the Block Control Information is
  *	not updated according (due to power failure or something) which leaves the block
- *	in an umconsistent state. So we have to check if a block is really FREE in this
+ *	in an inconsistent state. So we have to check if a block is really FREE in this
  *	case. */
 static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block)
 {
@@ -428,7 +428,7 @@
 
 	for (;;) {
 		length++;
-		/* avoid infinite loops, although this is guaranted not to
+		/* avoid infinite loops, although this is guaranteed not to
 		   happen because of the previous checks */
 		if (length >= nftl->nb_blocks) {
 			printk("nftl: length too long %d !\n", length);
@@ -447,11 +447,11 @@
 /* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a
  *	Virtual Unit Chain, i.e. all the units are disconnected.
  *
- *	It is not stricly correct to begin from the first block of the chain because
+ *	It is not strictly correct to begin from the first block of the chain because
  *	if we stop the code, we may see again a valid chain if there was a first_block
  *	flag in a block inside it. But is it really a problem ?
  *
- * FixMe: Figure out what the last statesment means. What if power failure when we are
+ * FixMe: Figure out what the last statement means. What if power failure when we are
  *	in the for (;;) loop formatting blocks ??
  */
 static void format_chain(struct NFTLrecord *nftl, unsigned int first_block)
@@ -485,7 +485,7 @@
  *	totally free (only 0xff).
  *
  * Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the
- *	following critia:
+ *	following criteria:
  *	1. */
 static int check_and_mark_free_block(struct NFTLrecord *nftl, int block)
 {
@@ -502,7 +502,7 @@
 	erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1));
 	if (erase_mark != ERASE_MARK) {
 		/* if no erase mark, the block must be totally free. This is
-		   possible in two cases : empty filsystem or interrupted erase (very unlikely) */
+		   possible in two cases : empty filesystem or interrupted erase (very unlikely) */
 		if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0)
 			return -1;
 
@@ -544,7 +544,7 @@
 /* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS
  *	to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2
  *	is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted
- *	for some reason. A clean up/check of the VUC is neceressary in this case.
+ *	for some reason. A clean up/check of the VUC is necessary in this case.
  *
  * WARNING: return 0 if read error
  */
@@ -657,7 +657,7 @@
 						printk("Block %d: incorrect logical block: %d expected: %d\n",
 						       block, logical_block, first_logical_block);
 						/* the chain is incorrect : we must format it,
-						   but we need to read it completly */
+						   but we need to read it completely */
 						do_format_chain = 1;
 					}
 					if (is_first_block) {
@@ -669,7 +669,7 @@
 							printk("Block %d: incorrectly marked as first block in chain\n",
 							       block);
 							/* the chain is incorrect : we must format it,
-							   but we need to read it completly */
+							   but we need to read it completely */
 							do_format_chain = 1;
 						} else {
 							printk("Block %d: folding in progress - ignoring first block flag\n",
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index a996718..64be8f08 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -20,14 +20,23 @@
 #include <linux/slab.h>
 #include <linux/mtd/partitions.h>
 
-int __devinit of_mtd_parse_partitions(struct device *dev,
-                                      struct device_node *node,
-                                      struct mtd_partition **pparts)
+static int parse_ofpart_partitions(struct mtd_info *master,
+				   struct mtd_partition **pparts,
+				   struct mtd_part_parser_data *data)
 {
+	struct device_node *node;
 	const char *partname;
 	struct device_node *pp;
 	int nr_parts, i;
 
+
+	if (!data)
+		return 0;
+
+	node = data->of_node;
+	if (!node)
+		return 0;
+
 	/* First count the subnodes */
 	pp = NULL;
 	nr_parts = 0;
@@ -69,7 +78,7 @@
 
 	if (!i) {
 		of_node_put(pp);
-		dev_err(dev, "No valid partition found on %s\n", node->full_name);
+		pr_err("No valid partition found on %s\n", node->full_name);
 		kfree(*pparts);
 		*pparts = NULL;
 		return -EINVAL;
@@ -77,6 +86,99 @@
 
 	return nr_parts;
 }
-EXPORT_SYMBOL(of_mtd_parse_partitions);
+
+static struct mtd_part_parser ofpart_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_ofpart_partitions,
+	.name = "ofpart",
+};
+
+static int parse_ofoldpart_partitions(struct mtd_info *master,
+				      struct mtd_partition **pparts,
+				      struct mtd_part_parser_data *data)
+{
+	struct device_node *dp;
+	int i, plen, nr_parts;
+	const struct {
+		__be32 offset, len;
+	} *part;
+	const char *names;
+
+	if (!data)
+		return 0;
+
+	dp = data->of_node;
+	if (!dp)
+		return 0;
+
+	part = of_get_property(dp, "partitions", &plen);
+	if (!part)
+		return 0; /* No partitions found */
+
+	pr_warning("Device tree uses obsolete partition map binding: %s\n",
+			dp->full_name);
+
+	nr_parts = plen / sizeof(part[0]);
+
+	*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+	if (!pparts)
+		return -ENOMEM;
+
+	names = of_get_property(dp, "partition-names", &plen);
+
+	for (i = 0; i < nr_parts; i++) {
+		(*pparts)[i].offset = be32_to_cpu(part->offset);
+		(*pparts)[i].size   = be32_to_cpu(part->len) & ~1;
+		/* bit 0 set signifies read only partition */
+		if (be32_to_cpu(part->len) & 1)
+			(*pparts)[i].mask_flags = MTD_WRITEABLE;
+
+		if (names && (plen > 0)) {
+			int len = strlen(names) + 1;
+
+			(*pparts)[i].name = (char *)names;
+			plen -= len;
+			names += len;
+		} else {
+			(*pparts)[i].name = "unnamed";
+		}
+
+		part++;
+	}
+
+	return nr_parts;
+}
+
+static struct mtd_part_parser ofoldpart_parser = {
+	.owner = THIS_MODULE,
+	.parse_fn = parse_ofoldpart_partitions,
+	.name = "ofoldpart",
+};
+
+static int __init ofpart_parser_init(void)
+{
+	int rc;
+	rc = register_mtd_parser(&ofpart_parser);
+	if (rc)
+		goto out;
+
+	rc = register_mtd_parser(&ofoldpart_parser);
+	if (!rc)
+		return 0;
+
+	deregister_mtd_parser(&ofoldpart_parser);
+out:
+	return rc;
+}
+
+module_init(ofpart_parser_init);
 
 MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
+MODULE_AUTHOR("Vitaly Wool, David Gibson");
+/*
+ * When MTD core cannot find the requested parser, it tries to load the module
+ * with the same name. Since we provide the ofoldpart parser, we should have
+ * the corresponding alias.
+ */
+MODULE_ALIAS("ofoldpart");
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 2d70d35..7813095 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -30,11 +30,8 @@
  */
 #define DRIVER_NAME	"onenand-flash"
 
-static const char *part_probes[] = { "cmdlinepart", NULL,  };
-
 struct onenand_info {
 	struct mtd_info		mtd;
-	struct mtd_partition	*parts;
 	struct onenand_chip	onenand;
 };
 
@@ -73,13 +70,9 @@
 		goto out_iounmap;
 	}
 
-	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
-	if (err > 0)
-		mtd_device_register(&info->mtd, info->parts, err);
-	else if (err <= 0 && pdata && pdata->parts)
-		mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
-	else
-		err = mtd_device_register(&info->mtd, NULL, 0);
+	err = mtd_device_parse_register(&info->mtd, NULL, 0,
+			pdata ? pdata->parts : NULL,
+			pdata ? pdata->nr_parts : 0);
 
 	platform_set_drvdata(pdev, info);
 
@@ -104,7 +97,6 @@
 	platform_set_drvdata(pdev, NULL);
 
 	if (info) {
-		mtd_device_unregister(&info->mtd);
 		onenand_release(&info->mtd);
 		release_mem_region(res->start, size);
 		iounmap(info->onenand.base);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 6a1d6d9..7e9ea68 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -57,7 +57,6 @@
 	unsigned long phys_base;
 	int gpio_irq;
 	struct mtd_info mtd;
-	struct mtd_partition *parts;
 	struct onenand_chip onenand;
 	struct completion irq_done;
 	struct completion dma_done;
@@ -67,8 +66,6 @@
 	struct regulator *regulator;
 };
 
-static const char *part_probes[] = { "cmdlinepart", NULL,  };
-
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
 {
 	struct omap2_onenand *c = data;
@@ -741,6 +738,7 @@
 		c->regulator = regulator_get(&pdev->dev, "vonenand");
 		if (IS_ERR(c->regulator)) {
 			dev_err(&pdev->dev,  "Failed to get regulator\n");
+			r = PTR_ERR(c->regulator);
 			goto err_release_dma;
 		}
 		c->onenand.enable = omap2_onenand_enable;
@@ -753,13 +751,9 @@
 	if ((r = onenand_scan(&c->mtd, 1)) < 0)
 		goto err_release_regulator;
 
-	r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
-	if (r > 0)
-		r = mtd_device_register(&c->mtd, c->parts, r);
-	else if (pdata->parts != NULL)
-		r = mtd_device_register(&c->mtd, pdata->parts, pdata->nr_parts);
-	else
-		r = mtd_device_register(&c->mtd, NULL, 0);
+	r = mtd_device_parse_register(&c->mtd, NULL, 0,
+			pdata ? pdata->parts : NULL,
+			pdata ? pdata->nr_parts : 0);
 	if (r)
 		goto err_release_onenand;
 
@@ -786,7 +780,6 @@
 err_free_cs:
 	gpmc_cs_free(c->gpmc_cs);
 err_kfree:
-	kfree(c->parts);
 	kfree(c);
 
 	return r;
@@ -809,7 +802,6 @@
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
 	gpmc_cs_free(c->gpmc_cs);
-	kfree(c->parts);
 	kfree(c);
 
 	return 0;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index ac9e959..a839473 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1015,7 +1015,7 @@
 }
 
 /**
- * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
  * @param mtd		MTD device structure
  * @param buf		destination address
  * @param column	oob offset to read from
@@ -1079,7 +1079,7 @@
 		return status;
 
 	/* check if we failed due to uncorrectable error */
-	if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+	if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
 		return status;
 
 	/* check if address lies in MLC region */
@@ -1122,10 +1122,10 @@
 	int ret = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-	      __func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1159,7 +1159,7 @@
 			if (unlikely(ret))
 				ret = onenand_recover_lsb(mtd, from, ret);
 			onenand_update_bufferram(mtd, from, !ret);
-			if (ret == -EBADMSG)
+			if (mtd_is_eccerr(ret))
 				ret = 0;
 			if (ret)
 				break;
@@ -1170,7 +1170,7 @@
 			thisooblen = oobsize - oobcolumn;
 			thisooblen = min_t(int, thisooblen, ooblen - oobread);
 
-			if (ops->mode == MTD_OOB_AUTO)
+			if (ops->mode == MTD_OPS_AUTO_OOB)
 				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
 			else
 				this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1226,10 +1226,10 @@
 	int ret = 0, boundary = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-			__func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1255,7 +1255,7 @@
 			this->command(mtd, ONENAND_CMD_READ, from, writesize);
  			ret = this->wait(mtd, FL_READING);
  			onenand_update_bufferram(mtd, from, !ret);
-			if (ret == -EBADMSG)
+			if (mtd_is_eccerr(ret))
 				ret = 0;
  		}
  	}
@@ -1291,7 +1291,7 @@
 			thisooblen = oobsize - oobcolumn;
 			thisooblen = min_t(int, thisooblen, ooblen - oobread);
 
-			if (ops->mode == MTD_OOB_AUTO)
+			if (ops->mode == MTD_OPS_AUTO_OOB)
 				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
 			else
 				this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
@@ -1315,7 +1315,7 @@
  		/* Now wait for load */
  		ret = this->wait(mtd, FL_READING);
  		onenand_update_bufferram(mtd, from, !ret);
-		if (ret == -EBADMSG)
+		if (mtd_is_eccerr(ret))
 			ret = 0;
  	}
 
@@ -1351,19 +1351,19 @@
 	struct mtd_ecc_stats stats;
 	int read = 0, thislen, column, oobsize;
 	size_t len = ops->ooblen;
-	mtd_oob_mode_t mode = ops->mode;
+	unsigned int mode = ops->mode;
 	u_char *buf = ops->oobbuf;
 	int ret = 0, readcmd;
 
 	from += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
-		__func__, (unsigned int) from, (int) len);
+	pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
+			(int)len);
 
 	/* Initialize return length value */
 	ops->oobretlen = 0;
 
-	if (mode == MTD_OOB_AUTO)
+	if (mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1403,13 +1403,13 @@
 		if (unlikely(ret))
 			ret = onenand_recover_lsb(mtd, from, ret);
 
-		if (ret && ret != -EBADMSG) {
+		if (ret && !mtd_is_eccerr(ret)) {
 			printk(KERN_ERR "%s: read failed = 0x%x\n",
 				__func__, ret);
 			break;
 		}
 
-		if (mode == MTD_OOB_AUTO)
+		if (mode == MTD_OPS_AUTO_OOB)
 			onenand_transfer_auto_oob(mtd, buf, column, thislen);
 		else
 			this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
@@ -1487,10 +1487,10 @@
 	int ret;
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
 		break;
-	case MTD_OOB_RAW:
+	case MTD_OPS_RAW:
 		/* Not implemented yet */
 	default:
 		return -EINVAL;
@@ -1576,8 +1576,8 @@
 	size_t len = ops->ooblen;
 	u_char *buf = ops->oobbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
-		__func__, (unsigned int) from, len);
+	pr_debug("%s: from = 0x%08x, len = %zi\n", __func__, (unsigned int)from,
+			len);
 
 	/* Initialize return value */
 	ops->oobretlen = 0;
@@ -1750,8 +1750,8 @@
 	/* Wait for any existing operation to clear */
 	onenand_panic_wait(mtd);
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Initialize retlen, in case of early exit */
 	*retlen = 0;
@@ -1821,7 +1821,7 @@
 }
 
 /**
- * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
  * @param mtd		MTD device structure
  * @param oob_buf	oob buffer
  * @param buf		source address
@@ -1883,8 +1883,8 @@
 	u_char *oobbuf;
 	int ret = 0, cmd;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->retlen = 0;
@@ -1908,7 +1908,7 @@
 	if (!len)
 		return 0;
 
-	if (ops->mode == MTD_OOB_AUTO)
+	if (ops->mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -1945,7 +1945,7 @@
 				/* We send data to spare ram with oobsize
 				 * to prevent byte access */
 				memset(oobbuf, 0xff, mtd->oobsize);
-				if (ops->mode == MTD_OOB_AUTO)
+				if (ops->mode == MTD_OPS_AUTO_OOB)
 					onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
 				else
 					memcpy(oobbuf + oobcolumn, oob, thisooblen);
@@ -2055,7 +2055,7 @@
 
 
 /**
- * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
@@ -2074,17 +2074,17 @@
 	u_char *oobbuf;
 	size_t len = ops->ooblen;
 	const u_char *buf = ops->oobbuf;
-	mtd_oob_mode_t mode = ops->mode;
+	unsigned int mode = ops->mode;
 
 	to += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
-		__func__, (unsigned int) to, (int) len);
+	pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to,
+			(int)len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->oobretlen = 0;
 
-	if (mode == MTD_OOB_AUTO)
+	if (mode == MTD_OPS_AUTO_OOB)
 		oobsize = this->ecclayout->oobavail;
 	else
 		oobsize = mtd->oobsize;
@@ -2128,7 +2128,7 @@
 		/* We send data to spare ram with oobsize
 		 * to prevent byte access */
 		memset(oobbuf, 0xff, mtd->oobsize);
-		if (mode == MTD_OOB_AUTO)
+		if (mode == MTD_OPS_AUTO_OOB)
 			onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
 		else
 			memcpy(oobbuf + column, buf, thislen);
@@ -2217,10 +2217,10 @@
 	int ret;
 
 	switch (ops->mode) {
-	case MTD_OOB_PLACE:
-	case MTD_OOB_AUTO:
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
 		break;
-	case MTD_OOB_RAW:
+	case MTD_OPS_RAW:
 		/* Not implemented yet */
 	default:
 		return -EINVAL;
@@ -2281,7 +2281,7 @@
 }
 
 /**
- * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
+ * onenand_multiblock_erase - [INTERN] erase block(s) using multiblock erase
  * @param mtd		MTD device structure
  * @param instr		erase instruction
  * @param region	erase region
@@ -2397,7 +2397,7 @@
 
 
 /**
- * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * onenand_block_by_block_erase - [INTERN] erase block(s) using regular erase
  * @param mtd		MTD device structure
  * @param instr		erase instruction
  * @param region	erase region
@@ -2489,8 +2489,9 @@
 	struct mtd_erase_region_info *region = NULL;
 	loff_t region_offset = 0;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
-	      (unsigned long long) instr->addr, (unsigned long long) instr->len);
+	pr_debug("%s: start=0x%012llx, len=%llu\n", __func__,
+			(unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
 
 	/* Do not allow erase past end of device */
 	if (unlikely((len + addr) > mtd->size)) {
@@ -2558,7 +2559,7 @@
  */
 static void onenand_sync(struct mtd_info *mtd)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_SYNCING);
@@ -2602,7 +2603,7 @@
 	struct bbm_info *bbm = this->bbm;
 	u_char buf[2] = {0, 0};
 	struct mtd_oob_ops ops = {
-		.mode = MTD_OOB_PLACE,
+		.mode = MTD_OPS_PLACE_OOB,
 		.ooblen = 2,
 		.oobbuf = buf,
 		.ooboffs = 0,
@@ -2922,7 +2923,7 @@
 }
 
 /**
- * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * onenand_otp_write_oob_nolock - [INTERN] OneNAND write out-of-band, specific to OTP
  * @param mtd		MTD device structure
  * @param to		offset to write to
  * @param len		number of bytes to write
@@ -3170,7 +3171,7 @@
 		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
 		this->wait(mtd, FL_RESETING);
 	} else {
-		ops.mode = MTD_OOB_PLACE;
+		ops.mode = MTD_OPS_PLACE_OOB;
 		ops.ooblen = len;
 		ops.oobbuf = buf;
 		ops.ooboffs = 0;
@@ -3429,6 +3430,19 @@
 		else if (numbufs == 1) {
 			this->options |= ONENAND_HAS_4KB_PAGE;
 			this->options |= ONENAND_HAS_CACHE_PROGRAM;
+			/*
+			 * There are two different 4KiB pagesize chips
+			 * and no way to detect it by H/W config values.
+			 *
+			 * To detect the correct NOP for each chips,
+			 * It should check the version ID as workaround.
+			 *
+			 * Now it has as following
+			 * KFM4G16Q4M has NOP 4 with version ID 0x0131
+			 * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+			 */
+			if ((this->version_id & 0xf) == 0xe)
+				this->options |= ONENAND_HAS_NOP_1;
 		}
 
 	case ONENAND_DEVICE_DENSITY_2Gb:
@@ -3663,7 +3677,7 @@
 	int i, ret;
 	int block;
 	struct mtd_oob_ops ops = {
-		.mode = MTD_OOB_PLACE,
+		.mode = MTD_OPS_PLACE_OOB,
 		.ooboffs = 0,
 		.ooblen	= mtd->oobsize,
 		.datbuf	= NULL,
@@ -4054,6 +4068,8 @@
 			this->ecclayout = &onenand_oob_128;
 			mtd->subpage_sft = 2;
 		}
+		if (ONENAND_IS_NOP_1(this))
+			mtd->subpage_sft = 0;
 		break;
 	case 64:
 		this->ecclayout = &onenand_oob_64;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index fc2c16a..66fe3b7 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
+#include <linux/export.h>
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -80,7 +81,7 @@
 	startblock = 0;
 	from = 0;
 
-	ops.mode = MTD_OOB_PLACE;
+	ops.mode = MTD_OPS_PLACE_OOB;
 	ops.ooblen = readlen;
 	ops.oobbuf = buf;
 	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -153,7 +154,7 @@
 	block = (int) (onenand_block(this, offs) << 1);
 	res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
-	DEBUG(MTD_DEBUG_LEVEL2, "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+	pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
 		(unsigned int) offs, block >> 1, res);
 
 	switch ((int) res) {
@@ -188,10 +189,8 @@
 	len = this->chipsize >> (this->erase_shift + 2);
 	/* Allocate memory (2bit per block) and clear the memory bad block table */
 	bbm->bbt = kzalloc(len, GFP_KERNEL);
-	if (!bbm->bbt) {
-		printk(KERN_ERR "onenand_scan_bbt: Out of memory\n");
+	if (!bbm->bbt)
 		return -ENOMEM;
-	}
 
 	/* Set the bad block position */
 	bbm->badblockpos = ONENAND_BADBLOCK_POS;
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 3306b5b..5474547 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -147,7 +147,6 @@
 	struct resource *dma_res;
 	unsigned long	phys_base;
 	struct completion	complete;
-	struct mtd_partition *parts;
 };
 
 #define CMD_MAP_00(dev, addr)		(dev->cmd_map(MAP_00, ((addr) << 1)))
@@ -157,8 +156,6 @@
 
 static struct s3c_onenand *onenand;
 
-static const char *part_probes[] = { "cmdlinepart", NULL, };
-
 static inline int s3c_read_reg(int offset)
 {
 	return readl(onenand->base + offset);
@@ -1017,13 +1014,9 @@
 	if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ)
 		dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n");
 
-	err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0);
-	if (err > 0)
-		mtd_device_register(mtd, onenand->parts, err);
-	else if (err <= 0 && pdata && pdata->parts)
-		mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
-	else
-		err = mtd_device_register(mtd, NULL, 0);
+	err = mtd_device_parse_register(mtd, NULL, 0,
+					pdata ? pdata->parts : NULL,
+					pdata ? pdata->nr_parts : 0);
 
 	platform_set_drvdata(pdev, mtd);
 
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 7a87d07..e366b1d 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -28,6 +28,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/module.h>
 
 struct fis_image_desc {
     unsigned char name[16];      // Null terminated name
@@ -56,8 +57,8 @@
 }
 
 static int parse_redboot_partitions(struct mtd_info *master,
-                             struct mtd_partition **pparts,
-                             unsigned long fis_origin)
+				    struct mtd_partition **pparts,
+				    struct mtd_part_parser_data *data)
 {
 	int nrparts = 0;
 	struct fis_image_desc *buf;
@@ -197,11 +198,10 @@
 			goto out;
 		}
 		new_fl->img = &buf[i];
-                if (fis_origin) {
-                        buf[i].flash_base -= fis_origin;
-                } else {
-                        buf[i].flash_base &= master->size-1;
-                }
+		if (data && data->origin)
+			buf[i].flash_base -= data->origin;
+		else
+			buf[i].flash_base &= master->size-1;
 
 		/* I'm sure the JFFS2 code has done me permanent damage.
 		 * I now think the following is _normal_
@@ -297,6 +297,9 @@
 	.name = "RedBoot",
 };
 
+/* mtd parsers will request the module by parser name */
+MODULE_ALIAS("RedBoot");
+
 static int __init redboot_parser_init(void)
 {
 	return register_mtd_parser(&redboot_parser);
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index cc4d180..73ae217 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -18,6 +18,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <linux/module.h>
 
 #include <asm/types.h>
 
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index ed3d6cd..fddb714 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -34,7 +34,7 @@
 MODULE_PARM_DESC(debug, "Debug level (0-2)");
 
 
-/* ------------------- sysfs attributtes ---------------------------------- */
+/* ------------------- sysfs attributes ---------------------------------- */
 struct sm_sysfs_attribute {
 	struct device_attribute dev_attr;
 	char *data;
@@ -138,7 +138,7 @@
 	if ((lba[0] & 0xF8) != 0x10)
 		return -2;
 
-	/* check parity - endianess doesn't matter */
+	/* check parity - endianness doesn't matter */
 	if (hweight16(*(uint16_t *)lba) & 1)
 		return -2;
 
@@ -147,7 +147,7 @@
 
 
 /*
- * Read LBA asscociated with block
+ * Read LBA associated with block
  * returns -1, if block is erased
  * returns -2 if error happens
  */
@@ -252,11 +252,11 @@
 		return 0;
 	}
 
-	/* User might not need the oob, but we do for data vertification */
+	/* User might not need the oob, but we do for data verification */
 	if (!oob)
 		oob = &tmp_oob;
 
-	ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+	ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
 	ops.ooboffs = 0;
 	ops.ooblen = SM_OOB_SIZE;
 	ops.oobbuf = (void *)oob;
@@ -276,12 +276,12 @@
 			return ret;
 	}
 
-	/* Unfortunelly, oob read will _always_ succeed,
+	/* Unfortunately, oob read will _always_ succeed,
 		despite card removal..... */
 	ret = mtd->read_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops);
 
 	/* Test for unknown errors */
-	if (ret != 0 && ret != -EUCLEAN && ret != -EBADMSG) {
+	if (ret != 0 && !mtd_is_bitflip_or_eccerr(ret)) {
 		dbg("read of block %d at zone %d, failed due to error (%d)",
 			block, zone, ret);
 		goto again;
@@ -306,7 +306,7 @@
 	}
 
 	/* Test ECC*/
-	if (ret == -EBADMSG ||
+	if (mtd_is_eccerr(ret) ||
 		(ftl->smallpagenand && sm_correct_sector(buffer, oob))) {
 
 		dbg("read of block %d at zone %d, failed due to ECC error",
@@ -336,7 +336,7 @@
 	if (ftl->unstable)
 		return -EIO;
 
-	ops.mode = ftl->smallpagenand ? MTD_OOB_RAW : MTD_OOB_PLACE;
+	ops.mode = ftl->smallpagenand ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
 	ops.len = SM_SECTOR_SIZE;
 	ops.datbuf = buffer;
 	ops.ooboffs = 0;
@@ -447,14 +447,14 @@
 
 	/* We aren't checking the return value, because we don't care */
 	/* This also fails on fake xD cards, but I guess these won't expose
-		any bad blocks till fail completly */
+		any bad blocks till fail completely */
 	for (boffset = 0; boffset < ftl->block_size; boffset += SM_SECTOR_SIZE)
 		sm_write_sector(ftl, zone, block, boffset, NULL, &oob);
 }
 
 /*
  * Erase a block within a zone
- * If erase succedes, it updates free block fifo, otherwise marks block as bad
+ * If erase succeeds, it updates free block fifo, otherwise marks block as bad
  */
 static int sm_erase_block(struct sm_ftl *ftl, int zone_num, uint16_t block,
 			  int put_free)
@@ -510,7 +510,7 @@
 	complete(&ftl->erase_completion);
 }
 
-/* Throughtly test that block is valid. */
+/* Thoroughly test that block is valid. */
 static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
 {
 	int boffset;
@@ -526,7 +526,7 @@
 	for (boffset = 0; boffset < ftl->block_size;
 					boffset += SM_SECTOR_SIZE) {
 
-		/* This shoudn't happen anyway */
+		/* This shouldn't happen anyway */
 		if (sm_read_sector(ftl, zone, block, boffset, NULL, &oob))
 			return -2;
 
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index 5cd1897..976e3d2 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -135,8 +135,7 @@
 				/* Found */
 				cis_sector = (int)(offset >> SECTOR_SHIFT);
 			} else {
-				DEBUG(MTD_DEBUG_LEVEL1,
-					"SSFDC_RO: CIS/IDI sector not found"
+				pr_debug("SSFDC_RO: CIS/IDI sector not found"
 					" on %s (mtd%d)\n", mtd->name,
 					mtd->index);
 			}
@@ -170,7 +169,7 @@
 	struct mtd_oob_ops ops;
 	int ret;
 
-	ops.mode = MTD_OOB_RAW;
+	ops.mode = MTD_OPS_RAW;
 	ops.ooboffs = 0;
 	ops.ooblen = OOB_SIZE;
 	ops.oobbuf = buf;
@@ -221,8 +220,7 @@
 			block_address >>= 1;
 
 			if (get_parity(block_address, 10) != parity) {
-				DEBUG(MTD_DEBUG_LEVEL0,
-					"SSFDC_RO: logical address field%d"
+				pr_debug("SSFDC_RO: logical address field%d"
 					"parity error(0x%04X)\n", j+1,
 					block_address);
 			} else {
@@ -235,7 +233,7 @@
 	if (!ok)
 		block_address = -2;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+	pr_debug("SSFDC_RO: get_logical_address() %d\n",
 		block_address);
 
 	return block_address;
@@ -249,7 +247,7 @@
 	int ret, block_address, phys_block;
 	struct mtd_info *mtd = ssfdc->mbd.mtd;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+	pr_debug("SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
 	      ssfdc->map_len,
 	      (unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
 
@@ -262,8 +260,7 @@
 
 		ret = read_raw_oob(mtd, offset, oob_buf);
 		if (ret < 0) {
-			DEBUG(MTD_DEBUG_LEVEL0,
-				"SSFDC_RO: mtd read_oob() failed at %lu\n",
+			pr_debug("SSFDC_RO: mtd read_oob() failed at %lu\n",
 				offset);
 			return -1;
 		}
@@ -279,8 +276,7 @@
 			ssfdc->logic_block_map[block_address] =
 				(unsigned short)phys_block;
 
-			DEBUG(MTD_DEBUG_LEVEL2,
-				"SSFDC_RO: build_block_map() phys_block=%d,"
+			pr_debug("SSFDC_RO: build_block_map() phys_block=%d,"
 				"logic_block_addr=%d, zone=%d\n",
 				phys_block, block_address, zone_index);
 		}
@@ -304,11 +300,8 @@
 		return;
 
 	ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
-	if (!ssfdc) {
-		printk(KERN_WARNING
-			"SSFDC_RO: out of memory for data structures\n");
+	if (!ssfdc)
 		return;
-	}
 
 	ssfdc->mbd.mtd = mtd;
 	ssfdc->mbd.devnum = -1;
@@ -319,8 +312,7 @@
 	ssfdc->erase_size = mtd->erasesize;
 	ssfdc->map_len = (u32)mtd->size / mtd->erasesize;
 
-	DEBUG(MTD_DEBUG_LEVEL1,
-		"SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+	pr_debug("SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
 		ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
 		DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));
 
@@ -331,7 +323,7 @@
 	ssfdc->cylinders = (unsigned short)(((u32)mtd->size >> SECTOR_SHIFT) /
 			((long)ssfdc->sectors * (long)ssfdc->heads));
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+	pr_debug("SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
 		ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
 		(long)ssfdc->cylinders * (long)ssfdc->heads *
 		(long)ssfdc->sectors);
@@ -342,11 +334,8 @@
 	/* Allocate logical block map */
 	ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
 					 ssfdc->map_len, GFP_KERNEL);
-	if (!ssfdc->logic_block_map) {
-		printk(KERN_WARNING
-			"SSFDC_RO: out of memory for data structures\n");
+	if (!ssfdc->logic_block_map)
 		goto out_err;
-	}
 	memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
 		ssfdc->map_len);
 
@@ -371,7 +360,7 @@
 {
 	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+	pr_debug("SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
 
 	del_mtd_blktrans_dev(dev);
 	kfree(ssfdc->logic_block_map);
@@ -387,8 +376,7 @@
 	offset = (int)(logic_sect_no % sectors_per_block);
 	block_address = (int)(logic_sect_no / sectors_per_block);
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-		"SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+	pr_debug("SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
 		" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
 		block_address);
 
@@ -397,8 +385,7 @@
 
 	block_address = ssfdc->logic_block_map[block_address];
 
-	DEBUG(MTD_DEBUG_LEVEL3,
-		"SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+	pr_debug("SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
 		block_address);
 
 	if (block_address < 0xffff) {
@@ -407,8 +394,7 @@
 		sect_no = (unsigned long)block_address * sectors_per_block +
 				offset;
 
-		DEBUG(MTD_DEBUG_LEVEL3,
-			"SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+		pr_debug("SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
 			sect_no);
 
 		if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
@@ -424,7 +410,7 @@
 {
 	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
 
-	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+	pr_debug("SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
 			ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
 
 	geo->heads = ssfdc->heads;
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index dec92ae..933f7e5 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -30,7 +30,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_oobtest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -131,7 +131,7 @@
 
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
 		set_random_data(writebuf, use_len);
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = use_len;
@@ -184,7 +184,7 @@
 
 	for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
 		set_random_data(writebuf, use_len);
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = use_len;
@@ -211,7 +211,7 @@
 		if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
 			int k;
 
-			ops.mode      = MTD_OOB_AUTO;
+			ops.mode      = MTD_OPS_AUTO_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = mtd->ecclayout->oobavail;
@@ -276,7 +276,7 @@
 	size_t len = mtd->ecclayout->oobavail * pgcnt;
 
 	set_random_data(writebuf, len);
-	ops.mode      = MTD_OOB_AUTO;
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = len;
@@ -366,6 +366,13 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
@@ -507,7 +514,7 @@
 		addr0 += mtd->erasesize;
 
 	/* Attempt to write off end of OOB */
-	ops.mode      = MTD_OOB_AUTO;
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = 1;
@@ -527,7 +534,7 @@
 	}
 
 	/* Attempt to read off end of OOB */
-	ops.mode      = MTD_OOB_AUTO;
+	ops.mode      = MTD_OPS_AUTO_OOB;
 	ops.len       = 0;
 	ops.retlen    = 0;
 	ops.ooblen    = 1;
@@ -551,7 +558,7 @@
 		       "block is bad\n");
 	else {
 		/* Attempt to write off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
@@ -571,7 +578,7 @@
 		}
 
 		/* Attempt to read off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail + 1;
@@ -595,7 +602,7 @@
 			goto out;
 
 		/* Attempt to write off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail;
@@ -615,7 +622,7 @@
 		}
 
 		/* Attempt to read off end of device */
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail;
@@ -655,7 +662,7 @@
 		addr = (i + 1) * mtd->erasesize - mtd->writesize;
 		for (pg = 0; pg < cnt; ++pg) {
 			set_random_data(writebuf, sz);
-			ops.mode      = MTD_OOB_AUTO;
+			ops.mode      = MTD_OPS_AUTO_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = sz;
@@ -683,7 +690,7 @@
 			continue;
 		set_random_data(writebuf, mtd->ecclayout->oobavail * 2);
 		addr = (i + 1) * mtd->erasesize - mtd->writesize;
-		ops.mode      = MTD_OOB_AUTO;
+		ops.mode      = MTD_OPS_AUTO_OOB;
 		ops.len       = 0;
 		ops.retlen    = 0;
 		ops.ooblen    = mtd->ecclayout->oobavail * 2;
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 00b937e..afafb69 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -30,7 +30,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_pagetest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -128,7 +128,7 @@
 	for (j = 0; j < pgcnt - 1; ++j, addr += pgsize) {
 		/* Do a read to set the internal dataRAMs to different data */
 		err = mtd->read(mtd, addr0, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -136,7 +136,7 @@
 			return err;
 		}
 		err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -146,7 +146,7 @@
 		memset(twopages, 0, bufsize);
 		read = 0;
 		err = mtd->read(mtd, addr, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -164,7 +164,7 @@
 		unsigned long oldnext = next;
 		/* Do a read to set the internal dataRAMs to different data */
 		err = mtd->read(mtd, addr0, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -172,7 +172,7 @@
 			return err;
 		}
 		err = mtd->read(mtd, addrn - bufsize, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -182,7 +182,7 @@
 		memset(twopages, 0, bufsize);
 		read = 0;
 		err = mtd->read(mtd, addr, bufsize, &read, twopages);
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != bufsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -231,7 +231,7 @@
 	read = 0;
 	addr = addrn - pgsize - pgsize;
 	err = mtd->read(mtd, addr, pgsize, &read, pp1);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -244,7 +244,7 @@
 	read = 0;
 	addr = addrn - pgsize - pgsize - pgsize;
 	err = mtd->read(mtd, addr, pgsize, &read, pp1);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -258,7 +258,7 @@
 	addr = addr0;
 	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
 	err = mtd->read(mtd, addr, pgsize, &read, pp2);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -272,7 +272,7 @@
 	addr = addrn - pgsize;
 	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
 	err = mtd->read(mtd, addr, pgsize, &read, pp3);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -286,7 +286,7 @@
 	addr = addr0;
 	printk(PRINT_PREF "reading page at %#llx\n", (long long)addr);
 	err = mtd->read(mtd, addr, pgsize, &read, pp4);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -345,7 +345,7 @@
 	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
 	memset(readbuf, 0, pgsize);
 	err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -383,7 +383,7 @@
 	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
 	memset(readbuf, 0, pgsize);
 	err = mtd->read(mtd, addr0, pgsize, &read, readbuf);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -439,7 +439,7 @@
 
 	printk(PRINT_PREF "reading 1st page of block %d\n", ebnum);
 	err = mtd->read(mtd, addr0, pgsize, &read, twopages);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != pgsize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -504,6 +504,13 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c
index afe71aa..550fe51 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/mtd_readtest.c
@@ -29,7 +29,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_readtest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -66,7 +66,7 @@
 		if (mtd->oobsize) {
 			struct mtd_oob_ops ops;
 
-			ops.mode      = MTD_OOB_PLACE;
+			ops.mode      = MTD_OPS_PLACE_OOB;
 			ops.len       = 0;
 			ops.retlen    = 0;
 			ops.ooblen    = mtd->oobsize;
@@ -75,7 +75,8 @@
 			ops.datbuf    = NULL;
 			ops.oobbuf    = oobbuf;
 			ret = mtd->read_oob(mtd, addr, &ops);
-			if (ret || ops.oobretlen != mtd->oobsize) {
+			if ((ret && !mtd_is_bitflip(ret)) ||
+					ops.oobretlen != mtd->oobsize) {
 				printk(PRINT_PREF "error: read oob failed at "
 						  "%#llx\n", (long long)addr);
 				if (!err)
@@ -169,6 +170,12 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c
index 627d4e2..493b367 100644
--- a/drivers/mtd/tests/mtd_speedtest.c
+++ b/drivers/mtd/tests/mtd_speedtest.c
@@ -29,7 +29,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_speedtest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -216,7 +216,7 @@
 
 	err = mtd->read(mtd, addr, mtd->erasesize, &read, iobuf);
 	/* Ignore corrected ECC errors */
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (err || read != mtd->erasesize) {
 		printk(PRINT_PREF "error: read failed at %#llx\n", addr);
@@ -237,7 +237,7 @@
 	for (i = 0; i < pgcnt; i++) {
 		err = mtd->read(mtd, addr, pgsize, &read, buf);
 		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != pgsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -263,7 +263,7 @@
 	for (i = 0; i < n; i++) {
 		err = mtd->read(mtd, addr, sz, &read, buf);
 		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != sz) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -278,7 +278,7 @@
 	if (pgcnt % 2) {
 		err = mtd->read(mtd, addr, pgsize, &read, buf);
 		/* Ignore corrected ECC errors */
-		if (err == -EUCLEAN)
+		if (mtd_is_bitflip(err))
 			err = 0;
 		if (err || read != pgsize) {
 			printk(PRINT_PREF "error: read failed at %#llx\n",
@@ -361,6 +361,13 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	if (count)
 		printk(PRINT_PREF "MTD device: %d    count: %d\n", dev, count);
 	else
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c
index 531625f..52ffd91 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/mtd_stresstest.c
@@ -30,7 +30,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_stresstest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -154,7 +154,7 @@
 	}
 	addr = eb * mtd->erasesize + offs;
 	err = mtd->read(mtd, addr, len, &read, readbuf);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		err = 0;
 	if (unlikely(err || read != len)) {
 		printk(PRINT_PREF "error: read failed at 0x%llx\n",
@@ -250,6 +250,13 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/mtd_subpagetest.c
index 334eae5..1a05bfa 100644
--- a/drivers/mtd/tests/mtd_subpagetest.c
+++ b/drivers/mtd/tests/mtd_subpagetest.c
@@ -29,7 +29,7 @@
 
 #define PRINT_PREF KERN_INFO "mtd_subpagetest: "
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -198,7 +198,7 @@
 	read = 0;
 	err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
 	if (unlikely(err || read != subpgsize)) {
-		if (err == -EUCLEAN && read == subpgsize) {
+		if (mtd_is_bitflip(err) && read == subpgsize) {
 			printk(PRINT_PREF "ECC correction at %#llx\n",
 			       (long long)addr);
 			err = 0;
@@ -226,7 +226,7 @@
 	read = 0;
 	err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
 	if (unlikely(err || read != subpgsize)) {
-		if (err == -EUCLEAN && read == subpgsize) {
+		if (mtd_is_bitflip(err) && read == subpgsize) {
 			printk(PRINT_PREF "ECC correction at %#llx\n",
 			       (long long)addr);
 			err = 0;
@@ -264,7 +264,7 @@
 		read = 0;
 		err = mtd->read(mtd, addr, subpgsize * k, &read, readbuf);
 		if (unlikely(err || read != subpgsize * k)) {
-			if (err == -EUCLEAN && read == subpgsize * k) {
+			if (mtd_is_bitflip(err) && read == subpgsize * k) {
 				printk(PRINT_PREF "ECC correction at %#llx\n",
 				       (long long)addr);
 				err = 0;
@@ -298,7 +298,7 @@
 		read = 0;
 		err = mtd->read(mtd, addr, subpgsize, &read, readbuf);
 		if (unlikely(err || read != subpgsize)) {
-			if (err == -EUCLEAN && read == subpgsize) {
+			if (mtd_is_bitflip(err) && read == subpgsize) {
 				printk(PRINT_PREF "ECC correction at %#llx\n",
 				       (long long)addr);
 				err = 0;
@@ -379,6 +379,13 @@
 
 	printk(KERN_INFO "\n");
 	printk(KERN_INFO "=================================================\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 
 	mtd = get_mtd_device(NULL, dev);
diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/mtd_torturetest.c
index 5c6c3d2..03ab649 100644
--- a/drivers/mtd/tests/mtd_torturetest.c
+++ b/drivers/mtd/tests/mtd_torturetest.c
@@ -46,7 +46,7 @@
 module_param(pgcnt, int, S_IRUGO);
 MODULE_PARM_DESC(pgcnt, "number of pages per eraseblock to torture (0 => all)");
 
-static int dev;
+static int dev = -EINVAL;
 module_param(dev, int, S_IRUGO);
 MODULE_PARM_DESC(dev, "MTD device number to use");
 
@@ -138,7 +138,7 @@
 
 retry:
 	err = mtd->read(mtd, addr, len, &read, check_buf);
-	if (err == -EUCLEAN)
+	if (mtd_is_bitflip(err))
 		printk(PRINT_PREF "single bit flip occurred at EB %d "
 		       "MTD reported that it was fixed.\n", ebnum);
 	else if (err) {
@@ -213,6 +213,13 @@
 	printk(KERN_INFO "=================================================\n");
 	printk(PRINT_PREF "Warning: this program is trying to wear out your "
 	       "flash, stop it if this is not wanted.\n");
+
+	if (dev < 0) {
+		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
+		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+		return -EINVAL;
+	}
+
 	printk(PRINT_PREF "MTD device: %d\n", dev);
 	printk(PRINT_PREF "torture %d eraseblocks (%d-%d) of mtd%d\n",
 	       ebcnt, eb, eb + ebcnt - 1, dev);
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 4be67181..fb7f19b 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -443,7 +443,7 @@
 		if (err == UBI_IO_BITFLIPS) {
 			scrub = 1;
 			err = 0;
-		} else if (err == -EBADMSG) {
+		} else if (mtd_is_eccerr(err)) {
 			if (vol->vol_type == UBI_DYNAMIC_VOLUME)
 				goto out_unlock;
 			scrub = 1;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 6ba55c2..f20b6f2 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -172,9 +172,9 @@
 retry:
 	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
 	if (err) {
-		const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+		const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : "";
 
-		if (err == -EUCLEAN) {
+		if (mtd_is_bitflip(err)) {
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
 			 * was corrected, so this is harmless.
@@ -205,7 +205,7 @@
 		 * all the requested data. But some buggy drivers might do
 		 * this, so we change it to -EIO.
 		 */
-		if (read != len && err == -EBADMSG) {
+		if (read != len && mtd_is_eccerr(err)) {
 			ubi_assert(0);
 			err = -EIO;
 		}
@@ -469,7 +469,7 @@
 
 out:
 	mutex_unlock(&ubi->buf_mutex);
-	if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
 		/*
 		 * If a bit-flip or data integrity error was detected, the test
 		 * has not passed because it happened on a freshly erased
@@ -760,7 +760,7 @@
 
 	read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
 	if (read_err) {
-		if (read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+		if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
 			return read_err;
 
 		/*
@@ -776,7 +776,7 @@
 
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
-		if (read_err == -EBADMSG)
+		if (mtd_is_eccerr(read_err))
 			return UBI_IO_BAD_HDR_EBADMSG;
 
 		/*
@@ -1032,12 +1032,12 @@
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
 	read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (read_err && read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+	if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
 		return read_err;
 
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
-		if (read_err == -EBADMSG)
+		if (mtd_is_eccerr(read_err))
 			return UBI_IO_BAD_HDR_EBADMSG;
 
 		if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
@@ -1219,7 +1219,7 @@
 		return -ENOMEM;
 
 	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -1306,7 +1306,7 @@
 	p = (char *)vid_hdr - ubi->vid_hdr_shift;
 	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
 			  ubi->vid_hdr_alsize);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto exit;
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -1358,7 +1358,7 @@
 	}
 
 	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf1);
-	if (err && err != -EUCLEAN)
+	if (err && !mtd_is_bitflip(err))
 		goto out_free;
 
 	for (i = 0; i < len; i++) {
@@ -1422,7 +1422,7 @@
 	}
 
 	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
-	if (err && err != -EUCLEAN) {
+	if (err && !mtd_is_bitflip(err)) {
 		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
 			"read %zd bytes", err, len, pnum, offset, read);
 		goto error;
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index d39716e..1a35fc5 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -410,7 +410,7 @@
 		return 0;
 
 	err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
-	if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+	if (err && mtd_is_eccerr(err) && vol->vol_type == UBI_STATIC_VOLUME) {
 		ubi_warn("mark volume %d as corrupted", vol_id);
 		vol->corrupted = 1;
 	}
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index ff2a65c..f6a7d7a 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -81,7 +81,7 @@
 
 		err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
 		if (err) {
-			if (err == -EBADMSG)
+			if (mtd_is_eccerr(err))
 				err = 1;
 			break;
 		}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index a3a198f..0cb17d9 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -395,7 +395,7 @@
 	}
 
 	err = ubi_io_read_data(ubi, buf, pnum, 0, len);
-	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+	if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err))
 		goto out_free_buf;
 
 	data_crc = be32_to_cpu(vid_hdr->data_crc);
@@ -793,7 +793,7 @@
 
 	err = ubi_io_read(ubi, ubi->peb_buf1, pnum, ubi->leb_start,
 			  ubi->leb_size);
-	if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+	if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) {
 		/*
 		 * Bit-flips or integrity errors while reading the data area.
 		 * It is difficult to say for sure what type of corruption is
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 97e093d..863835f 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/math64.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 4b50a30..9ad18da 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -423,7 +423,7 @@
 
 		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
 				       ubi->vtbl_size);
-		if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+		if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
 			/*
 			 * Scrub the PEB later. Note, -EBADMSG indicates an
 			 * uncorrectable ECC error, but we have our own CRC and
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 583f66c..654a5e9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -245,6 +245,8 @@
 
 source "drivers/net/fddi/Kconfig"
 
+source "drivers/net/hippi/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a73d9dc..84fb634 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI || PCMCIA)
-	bool "ARCnet support"
+	tristate "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index c34cc1e..7f87568 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -550,7 +550,7 @@
 /*
  * Get link speed and duplex from the slave's base driver
  * using ethtool. If for some reason the call fails or the
- * values are invalid, fake speed and duplex to 100/Full
+ * values are invalid, set speed and duplex to -1,
  * and return error.
  */
 static int bond_update_speed_duplex(struct slave *slave)
@@ -560,9 +560,8 @@
 	u32 slave_speed;
 	int res;
 
-	/* Fake speed and duplex */
-	slave->speed = SPEED_100;
-	slave->duplex = DUPLEX_FULL;
+	slave->speed = SPEED_UNKNOWN;
+	slave->duplex = DUPLEX_UNKNOWN;
 
 	res = __ethtool_get_settings(slave_dev, &ecmd);
 	if (res < 0)
@@ -1751,16 +1750,7 @@
 		new_slave->link  = BOND_LINK_DOWN;
 	}
 
-	if (bond_update_speed_duplex(new_slave) &&
-	    (new_slave->link != BOND_LINK_DOWN)) {
-		pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n",
-			   bond_dev->name, new_slave->dev->name);
-
-		if (bond->params.mode == BOND_MODE_8023AD) {
-			pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n",
-				   bond_dev->name);
-		}
-	}
+	bond_update_speed_duplex(new_slave);
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
@@ -2563,30 +2553,6 @@
 	}
 }
 
-static __be32 bond_glean_dev_ip(struct net_device *dev)
-{
-	struct in_device *idev;
-	struct in_ifaddr *ifa;
-	__be32 addr = 0;
-
-	if (!dev)
-		return 0;
-
-	rcu_read_lock();
-	idev = __in_dev_get_rcu(dev);
-	if (!idev)
-		goto out;
-
-	ifa = idev->ifa_list;
-	if (!ifa)
-		goto out;
-
-	addr = ifa->ifa_local;
-out:
-	rcu_read_unlock();
-	return addr;
-}
-
 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 {
 	struct vlan_entry *vlan;
@@ -3220,6 +3186,7 @@
 {
 	struct net_device *bond_dev = slave_dev->master;
 	struct bonding *bond = netdev_priv(bond_dev);
+	struct slave *slave = NULL;
 
 	switch (event) {
 	case NETDEV_UNREGISTER:
@@ -3230,20 +3197,16 @@
 				bond_release(bond_dev, slave_dev);
 		}
 		break;
+	case NETDEV_UP:
 	case NETDEV_CHANGE:
-		if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
-			struct slave *slave;
+		slave = bond_get_slave_by_dev(bond, slave_dev);
+		if (slave) {
+			u32 old_speed = slave->speed;
+			u8  old_duplex = slave->duplex;
 
-			slave = bond_get_slave_by_dev(bond, slave_dev);
-			if (slave) {
-				u32 old_speed = slave->speed;
-				u8  old_duplex = slave->duplex;
+			bond_update_speed_duplex(slave);
 
-				bond_update_speed_duplex(slave);
-
-				if (bond_is_lb(bond))
-					break;
-
+			if (bond->params.mode == BOND_MODE_8023AD) {
 				if (old_speed != slave->speed)
 					bond_3ad_adapter_speed_changed(slave);
 				if (old_duplex != slave->duplex)
@@ -3335,6 +3298,10 @@
 	struct bonding *bond;
 	struct vlan_entry *vlan;
 
+	/* we only care about primary address */
+	if(ifa->ifa_flags & IFA_F_SECONDARY)
+		return NOTIFY_DONE;
+
 	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
@@ -3342,7 +3309,7 @@
 				bond->master_ip = ifa->ifa_local;
 				return NOTIFY_OK;
 			case NETDEV_DOWN:
-				bond->master_ip = bond_glean_dev_ip(bond->dev);
+				bond->master_ip = 0;
 				return NOTIFY_OK;
 			default:
 				return NOTIFY_DONE;
@@ -3358,8 +3325,7 @@
 					vlan->vlan_ip = ifa->ifa_local;
 					return NOTIFY_OK;
 				case NETDEV_DOWN:
-					vlan->vlan_ip =
-						bond_glean_dev_ip(vlan_dev);
+					vlan->vlan_ip = 0;
 					return NOTIFY_OK;
 				default:
 					return NOTIFY_DONE;
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 95de93b..ad284ba 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -1,4 +1,5 @@
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
 #include "bonding.h"
@@ -157,8 +158,16 @@
 	seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
 	seq_printf(seq, "MII Status: %s\n",
 		   (slave->link == BOND_LINK_UP) ?  "up" : "down");
-	seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
-	seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
+	if (slave->speed == SPEED_UNKNOWN)
+		seq_printf(seq, "Speed: %s\n", "Unknown");
+	else
+		seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
+
+	if (slave->duplex == DUPLEX_UNKNOWN)
+		seq_printf(seq, "Duplex: %s\n", "Unknown");
+	else
+		seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
+
 	seq_printf(seq, "Link Failure Count: %u\n",
 		   slave->link_failure_count);
 
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5a20804..4ef7e2f 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -319,6 +319,13 @@
 		goto out;
 	}
 
+	if (bond->slave_cnt > 0) {
+		pr_err("unable to update mode of %s because it has slaves.\n",
+			bond->dev->name);
+		ret = -EPERM;
+		goto out;
+	}
+
 	new_value = bond_parse_parm(buf, bond_mode_tbl);
 	if (new_value < 0)  {
 		pr_err("%s: Ignoring invalid mode value %.*s.\n",
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 905bce0..2c7f503 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -20,7 +20,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6dff5a0..597f4d45 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -159,6 +159,7 @@
 	  will be called s6gmac.
 
 source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/silan/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/sgi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c53ad3a..be5dde0 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -58,6 +58,7 @@
 obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
 obj-$(CONFIG_S6GMAC) += s6gmac.o
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
 obj-$(CONFIG_NET_VENDOR_SIS) += sis/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index 8238667..4865ff1 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -541,19 +541,17 @@
  * these are not descriptors sitting in memory.
  */
 static void
-au1000_setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
+au1000_setup_hw_rings(struct au1000_private *aup, void __iomem *tx_base)
 {
 	int i;
 
 	for (i = 0; i < NUM_RX_DMA; i++) {
-		aup->rx_dma_ring[i] =
-			(struct rx_dma *)
-					(rx_base + sizeof(struct rx_dma)*i);
+		aup->rx_dma_ring[i] = (struct rx_dma *)
+			(tx_base + 0x100 + sizeof(struct rx_dma) * i);
 	}
 	for (i = 0; i < NUM_TX_DMA; i++) {
-		aup->tx_dma_ring[i] =
-			(struct tx_dma *)
-					(tx_base + sizeof(struct tx_dma)*i);
+		aup->tx_dma_ring[i] = (struct tx_dma *)
+			(tx_base + sizeof(struct tx_dma) * i);
 	}
 }
 
@@ -1026,7 +1024,7 @@
 	struct net_device *dev = NULL;
 	struct db_dest *pDB, *pDBfree;
 	int irq, i, err = 0;
-	struct resource *base, *macen;
+	struct resource *base, *macen, *macdma;
 
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!base) {
@@ -1049,6 +1047,13 @@
 		goto out;
 	}
 
+	macdma = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!macdma) {
+		dev_err(&pdev->dev, "failed to retrieve MACDMA registers\n");
+		err = -ENODEV;
+		goto out;
+	}
+
 	if (!request_mem_region(base->start, resource_size(base),
 							pdev->name)) {
 		dev_err(&pdev->dev, "failed to request memory region for base registers\n");
@@ -1063,6 +1068,13 @@
 		goto err_request;
 	}
 
+	if (!request_mem_region(macdma->start, resource_size(macdma),
+							pdev->name)) {
+		dev_err(&pdev->dev, "failed to request MACDMA memory region\n");
+		err = -ENXIO;
+		goto err_macdma;
+	}
+
 	dev = alloc_etherdev(sizeof(struct au1000_private));
 	if (!dev) {
 		dev_err(&pdev->dev, "alloc_etherdev failed\n");
@@ -1109,10 +1121,14 @@
 	}
 	aup->mac_id = pdev->id;
 
-	if (pdev->id == 0)
-		au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-	else if (pdev->id == 1)
-		au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
+	aup->macdma = ioremap_nocache(macdma->start, resource_size(macdma));
+	if (!aup->macdma) {
+		dev_err(&pdev->dev, "failed to ioremap MACDMA registers\n");
+		err = -ENXIO;
+		goto err_remap3;
+	}
+
+	au1000_setup_hw_rings(aup, aup->macdma);
 
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
@@ -1252,6 +1268,8 @@
 err_mdiobus_reg:
 	mdiobus_free(aup->mii_bus);
 err_mdiobus_alloc:
+	iounmap(aup->macdma);
+err_remap3:
 	iounmap(aup->enable);
 err_remap2:
 	iounmap(aup->mac);
@@ -1261,6 +1279,8 @@
 err_vaddr:
 	free_netdev(dev);
 err_alloc:
+	release_mem_region(macdma->start, resource_size(macdma));
+err_macdma:
 	release_mem_region(macen->start, resource_size(macen));
 err_request:
 	release_mem_region(base->start, resource_size(base));
@@ -1293,9 +1313,13 @@
 			(NUM_TX_BUFFS + NUM_RX_BUFFS),
 			(void *)aup->vaddr, aup->dma_addr);
 
+	iounmap(aup->macdma);
 	iounmap(aup->mac);
 	iounmap(aup->enable);
 
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	release_mem_region(base->start, resource_size(base));
+
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(base->start, resource_size(base));
 
diff --git a/drivers/net/ethernet/amd/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
index 6229c77..4b7f7ad 100644
--- a/drivers/net/ethernet/amd/au1000_eth.h
+++ b/drivers/net/ethernet/amd/au1000_eth.h
@@ -124,7 +124,7 @@
 	 */
 	struct mac_reg *mac;  /* mac registers                      */
 	u32 *enable;     /* address of MAC Enable Register     */
-
+	void __iomem *macdma;	/* base of MAC DMA port */
 	u32 vaddr;                /* virtual address of rx/tx buffers   */
 	dma_addr_t dma_addr;      /* dma address of rx/tx buffers       */
 
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
index a759d54..1375e2d 100644
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -52,18 +52,6 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called bmac.
 
-config MAC89x0
-	tristate "Macintosh CS89x0 based ethernet cards"
-	depends on MAC
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards.  If you have a
-	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called mac89x0.
-
 config MACMACE
 	bool "Macintosh (AV) onboard MACE ethernet"
 	depends on MAC
diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile
index 0d3a591..86eaa17 100644
--- a/drivers/net/ethernet/apple/Makefile
+++ b/drivers/net/ethernet/apple/Makefile
@@ -4,5 +4,4 @@
 
 obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
 obj-$(CONFIG_MACMACE) += macmace.o
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index 4cf835d..3fb66d0 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -608,7 +608,7 @@
 				 skb->len,
 				 DMA_TO_DEVICE);
 		rp->skb = NULL;
-		dev_kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 
 	bp->tx_cons = cons;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index bce203f..882f48f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -10327,6 +10327,43 @@
 	return 0;
 }
 
+
+static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy,
+				       struct link_params *params, u8 mode)
+{
+	struct bnx2x *bp = params->bp;
+	u16 temp;
+
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_LED_SEL1);
+	bnx2x_cl22_read(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		&temp);
+	temp &= 0xff00;
+
+	DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode);
+	switch (mode) {
+	case LED_MODE_FRONT_PANEL_OFF:
+	case LED_MODE_OFF:
+		temp |= 0x00ee;
+		break;
+	case LED_MODE_OPER:
+		temp |= 0x0001;
+		break;
+	case LED_MODE_ON:
+		temp |= 0x00ff;
+		break;
+	default:
+		break;
+	}
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+	return;
+}
+
+
 static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
 				     struct link_params *params)
 {
@@ -11103,7 +11140,7 @@
 	.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
 	.format_fw_ver	= (format_fw_ver_t)NULL,
 	.hw_reset	= (hw_reset_t)NULL,
-	.set_link_led	= (set_link_led_t)NULL,
+	.set_link_led	= (set_link_led_t)bnx2x_5461x_set_link_led,
 	.phy_specific_func = (phy_specific_func_t)NULL
 };
 /*****************************************************************/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 6486ab8..2f6361e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10548,33 +10548,38 @@
 
 int bnx2x_init_firmware(struct bnx2x *bp)
 {
-	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
 	int rc;
 
-	if (CHIP_IS_E1(bp))
-		fw_file_name = FW_FILE_NAME_E1;
-	else if (CHIP_IS_E1H(bp))
-		fw_file_name = FW_FILE_NAME_E1H;
-	else if (!CHIP_IS_E1x(bp))
-		fw_file_name = FW_FILE_NAME_E2;
-	else {
-		BNX2X_ERR("Unsupported chip revision\n");
-		return -EINVAL;
-	}
 
-	BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+	if (!bp->firmware) {
+		const char *fw_file_name;
 
-	rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
-	if (rc) {
-		BNX2X_ERR("Can't load firmware file %s\n", fw_file_name);
-		goto request_firmware_exit;
-	}
+		if (CHIP_IS_E1(bp))
+			fw_file_name = FW_FILE_NAME_E1;
+		else if (CHIP_IS_E1H(bp))
+			fw_file_name = FW_FILE_NAME_E1H;
+		else if (!CHIP_IS_E1x(bp))
+			fw_file_name = FW_FILE_NAME_E2;
+		else {
+			BNX2X_ERR("Unsupported chip revision\n");
+			return -EINVAL;
+		}
+		BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
 
-	rc = bnx2x_check_firmware(bp);
-	if (rc) {
-		BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
-		goto request_firmware_exit;
+		rc = request_firmware(&bp->firmware, fw_file_name,
+				      &bp->pdev->dev);
+		if (rc) {
+			BNX2X_ERR("Can't load firmware file %s\n",
+				  fw_file_name);
+			goto request_firmware_exit;
+		}
+
+		rc = bnx2x_check_firmware(bp);
+		if (rc) {
+			BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+			goto request_firmware_exit;
+		}
 	}
 
 	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
@@ -10630,6 +10635,7 @@
 	kfree(bp->init_ops);
 	kfree(bp->init_data);
 	release_firmware(bp->firmware);
+	bp->firmware = NULL;
 }
 
 
@@ -10925,6 +10931,8 @@
 	if (bp->doorbells)
 		iounmap(bp->doorbells);
 
+	bnx2x_release_firmware(bp);
+
 	bnx2x_free_mem_bp(bp);
 
 	free_netdev(dev);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index fc7bd0f..e58073e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -6990,6 +6990,7 @@
 #define MDIO_REG_INTR_MASK				0x1b
 #define MDIO_REG_INTR_MASK_LINK_STATUS			(0x1 << 1)
 #define MDIO_REG_GPHY_SHADOW				0x1c
+#define MDIO_REG_GPHY_SHADOW_LED_SEL1			(0x0d << 10)
 #define MDIO_REG_GPHY_SHADOW_LED_SEL2			(0x0e << 10)
 #define MDIO_REG_GPHY_SHADOW_WR_ENA			(0x1 << 15)
 #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED		(0x1e << 10)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 0440425..1451769 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -5380,7 +5380,7 @@
 	rc = drv->init_fw(bp);
 	if (rc) {
 		BNX2X_ERR("Error loading firmware\n");
-		goto fw_init_err;
+		goto init_err;
 	}
 
 	/* Handle the beginning of COMMON_XXX pases separatelly... */
@@ -5388,25 +5388,25 @@
 	case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
 		rc = bnx2x_func_init_cmn_chip(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_COMMON:
 		rc = bnx2x_func_init_cmn(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_PORT:
 		rc = bnx2x_func_init_port(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
 		rc = bnx2x_func_init_func(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	default:
@@ -5414,10 +5414,7 @@
 		rc = -EINVAL;
 	}
 
-init_hw_err:
-	drv->release_fw(bp);
-
-fw_init_err:
+init_err:
 	drv->gunzip_end(bp);
 
 	/* In case of success, complete the comand immediatelly: no ramrods
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 161cbbb..bf40741 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -89,10 +89,10 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define TG3_MAJ_NUM			3
-#define TG3_MIN_NUM			120
+#define TG3_MIN_NUM			121
 #define DRV_MODULE_VERSION	\
 	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE	"August 18, 2011"
+#define DRV_MODULE_RELDATE	"November 2, 2011"
 
 #define RESET_KIND_SHUTDOWN	0
 #define RESET_KIND_INIT		1
@@ -628,19 +628,23 @@
 		regbase = TG3_APE_PER_LOCK_GRANT;
 
 	/* Make sure the driver hasn't any stale locks. */
-	for (i = 0; i < 8; i++) {
-		if (i == TG3_APE_LOCK_GPIO)
-			continue;
-		tg3_ape_write32(tp, regbase + 4 * i, APE_LOCK_GRANT_DRIVER);
+	for (i = TG3_APE_LOCK_PHY0; i <= TG3_APE_LOCK_GPIO; i++) {
+		switch (i) {
+		case TG3_APE_LOCK_PHY0:
+		case TG3_APE_LOCK_PHY1:
+		case TG3_APE_LOCK_PHY2:
+		case TG3_APE_LOCK_PHY3:
+			bit = APE_LOCK_GRANT_DRIVER;
+			break;
+		default:
+			if (!tp->pci_fn)
+				bit = APE_LOCK_GRANT_DRIVER;
+			else
+				bit = 1 << tp->pci_fn;
+		}
+		tg3_ape_write32(tp, regbase + 4 * i, bit);
 	}
 
-	/* Clear the correct bit of the GPIO lock too. */
-	if (!tp->pci_fn)
-		bit = APE_LOCK_GRANT_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
-	tg3_ape_write32(tp, regbase + 4 * TG3_APE_LOCK_GPIO, bit);
 }
 
 static int tg3_ape_lock(struct tg3 *tp, int locknum)
@@ -658,6 +662,10 @@
 			return 0;
 	case TG3_APE_LOCK_GRC:
 	case TG3_APE_LOCK_MEM:
+		if (!tp->pci_fn)
+			bit = APE_LOCK_REQ_DRIVER;
+		else
+			bit = 1 << tp->pci_fn;
 		break;
 	default:
 		return -EINVAL;
@@ -673,11 +681,6 @@
 
 	off = 4 * locknum;
 
-	if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
-		bit = APE_LOCK_REQ_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
 	tg3_ape_write32(tp, req + off, bit);
 
 	/* Wait for up to 1 millisecond to acquire lock. */
@@ -710,6 +713,10 @@
 			return;
 	case TG3_APE_LOCK_GRC:
 	case TG3_APE_LOCK_MEM:
+		if (!tp->pci_fn)
+			bit = APE_LOCK_GRANT_DRIVER;
+		else
+			bit = 1 << tp->pci_fn;
 		break;
 	default:
 		return;
@@ -720,11 +727,6 @@
 	else
 		gnt = TG3_APE_PER_LOCK_GRANT;
 
-	if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
-		bit = APE_LOCK_GRANT_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
 	tg3_ape_write32(tp, gnt + 4 * locknum, bit);
 }
 
@@ -5927,6 +5929,18 @@
 	return work_done;
 }
 
+static inline void tg3_reset_task_schedule(struct tg3 *tp)
+{
+	if (!test_and_set_bit(TG3_FLAG_RESET_TASK_PENDING, tp->tg3_flags))
+		schedule_work(&tp->reset_task);
+}
+
+static inline void tg3_reset_task_cancel(struct tg3 *tp)
+{
+	cancel_work_sync(&tp->reset_task);
+	tg3_flag_clear(tp, RESET_TASK_PENDING);
+}
+
 static int tg3_poll_msix(struct napi_struct *napi, int budget)
 {
 	struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
@@ -5967,7 +5981,7 @@
 tx_recovery:
 	/* work_done is guaranteed to be less than budget. */
 	napi_complete(napi);
-	schedule_work(&tp->reset_task);
+	tg3_reset_task_schedule(tp);
 	return work_done;
 }
 
@@ -6002,7 +6016,7 @@
 	tg3_dump_state(tp);
 
 	tg3_flag_set(tp, ERROR_PROCESSED);
-	schedule_work(&tp->reset_task);
+	tg3_reset_task_schedule(tp);
 }
 
 static int tg3_poll(struct napi_struct *napi, int budget)
@@ -6049,7 +6063,7 @@
 tx_recovery:
 	/* work_done is guaranteed to be less than budget. */
 	napi_complete(napi);
-	schedule_work(&tp->reset_task);
+	tg3_reset_task_schedule(tp);
 	return work_done;
 }
 
@@ -6338,11 +6352,11 @@
 {
 	struct tg3 *tp = container_of(work, struct tg3, reset_task);
 	int err;
-	unsigned int restart_timer;
 
 	tg3_full_lock(tp, 0);
 
 	if (!netif_running(tp->dev)) {
+		tg3_flag_clear(tp, RESET_TASK_PENDING);
 		tg3_full_unlock(tp);
 		return;
 	}
@@ -6355,9 +6369,6 @@
 
 	tg3_full_lock(tp, 1);
 
-	restart_timer = tg3_flag(tp, RESTART_TIMER);
-	tg3_flag_clear(tp, RESTART_TIMER);
-
 	if (tg3_flag(tp, TX_RECOVERY_PENDING)) {
 		tp->write32_tx_mbox = tg3_write32_tx_mbox;
 		tp->write32_rx_mbox = tg3_write_flush_reg32;
@@ -6372,14 +6383,13 @@
 
 	tg3_netif_start(tp);
 
-	if (restart_timer)
-		mod_timer(&tp->timer, jiffies + 1);
-
 out:
 	tg3_full_unlock(tp);
 
 	if (!err)
 		tg3_phy_start(tp);
+
+	tg3_flag_clear(tp, RESET_TASK_PENDING);
 }
 
 static void tg3_tx_timeout(struct net_device *dev)
@@ -6391,7 +6401,7 @@
 		tg3_dump_state(tp);
 	}
 
-	schedule_work(&tp->reset_task);
+	tg3_reset_task_schedule(tp);
 }
 
 /* Test for DMA buffers crossing any 4GB boundaries: 4G, 8G, etc */
@@ -6442,31 +6452,26 @@
 		hwbug = 1;
 
 	if (tg3_flag(tp, 4K_FIFO_LIMIT)) {
+		u32 prvidx = *entry;
 		u32 tmp_flag = flags & ~TXD_FLAG_END;
-		while (len > TG3_TX_BD_DMA_MAX) {
+		while (len > TG3_TX_BD_DMA_MAX && *budget) {
 			u32 frag_len = TG3_TX_BD_DMA_MAX;
 			len -= TG3_TX_BD_DMA_MAX;
 
-			if (len) {
-				tnapi->tx_buffers[*entry].fragmented = true;
-				/* Avoid the 8byte DMA problem */
-				if (len <= 8) {
-					len += TG3_TX_BD_DMA_MAX / 2;
-					frag_len = TG3_TX_BD_DMA_MAX / 2;
-				}
-			} else
-				tmp_flag = flags;
-
-			if (*budget) {
-				tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
-					      frag_len, tmp_flag, mss, vlan);
-				(*budget)--;
-				*entry = NEXT_TX(*entry);
-			} else {
-				hwbug = 1;
-				break;
+			/* Avoid the 8byte DMA problem */
+			if (len <= 8) {
+				len += TG3_TX_BD_DMA_MAX / 2;
+				frag_len = TG3_TX_BD_DMA_MAX / 2;
 			}
 
+			tnapi->tx_buffers[*entry].fragmented = true;
+
+			tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
+				      frag_len, tmp_flag, mss, vlan);
+			*budget -= 1;
+			prvidx = *entry;
+			*entry = NEXT_TX(*entry);
+
 			map += frag_len;
 		}
 
@@ -6474,10 +6479,11 @@
 			if (*budget) {
 				tg3_tx_set_bd(&tnapi->tx_ring[*entry], map,
 					      len, flags, mss, vlan);
-				(*budget)--;
+				*budget -= 1;
 				*entry = NEXT_TX(*entry);
 			} else {
 				hwbug = 1;
+				tnapi->tx_buffers[prvidx].fragmented = false;
 			}
 		}
 	} else {
@@ -6509,7 +6515,7 @@
 		txb = &tnapi->tx_buffers[entry];
 	}
 
-	for (i = 0; i < last; i++) {
+	for (i = 0; i <= last; i++) {
 		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 		entry = NEXT_TX(entry);
@@ -6559,6 +6565,8 @@
 			dev_kfree_skb(new_skb);
 			ret = -1;
 		} else {
+			u32 save_entry = *entry;
+
 			base_flags |= TXD_FLAG_END;
 
 			tnapi->tx_buffers[*entry].skb = new_skb;
@@ -6568,7 +6576,7 @@
 			if (tg3_tx_frag_set(tnapi, entry, budget, new_addr,
 					    new_skb->len, base_flags,
 					    mss, vlan)) {
-				tg3_tx_skb_unmap(tnapi, *entry, 0);
+				tg3_tx_skb_unmap(tnapi, save_entry, -1);
 				dev_kfree_skb(new_skb);
 				ret = -1;
 			}
@@ -6758,11 +6766,10 @@
 
 	if (tg3_tx_frag_set(tnapi, &entry, &budget, mapping, len, base_flags |
 			  ((skb_shinfo(skb)->nr_frags == 0) ? TXD_FLAG_END : 0),
-			    mss, vlan))
+			    mss, vlan)) {
 		would_hit_hwbug = 1;
-
 	/* Now loop through additional data fragments, and queue them. */
-	if (skb_shinfo(skb)->nr_frags > 0) {
+	} else if (skb_shinfo(skb)->nr_frags > 0) {
 		u32 tmp_mss = mss;
 
 		if (!tg3_flag(tp, HW_TSO_1) &&
@@ -6784,11 +6791,14 @@
 			if (dma_mapping_error(&tp->pdev->dev, mapping))
 				goto dma_error;
 
-			if (tg3_tx_frag_set(tnapi, &entry, &budget, mapping,
+			if (!budget ||
+			    tg3_tx_frag_set(tnapi, &entry, &budget, mapping,
 					    len, base_flags |
 					    ((i == last) ? TXD_FLAG_END : 0),
-					    tmp_mss, vlan))
+					    tmp_mss, vlan)) {
 				would_hit_hwbug = 1;
+				break;
+			}
 		}
 	}
 
@@ -6828,7 +6838,7 @@
 	return NETDEV_TX_OK;
 
 dma_error:
-	tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, i);
+	tg3_tx_skb_unmap(tnapi, tnapi->tx_prod, --i);
 	tnapi->tx_buffers[tnapi->tx_prod].skb = NULL;
 drop:
 	dev_kfree_skb(skb);
@@ -7281,7 +7291,8 @@
 			if (!skb)
 				continue;
 
-			tg3_tx_skb_unmap(tnapi, i, skb_shinfo(skb)->nr_frags);
+			tg3_tx_skb_unmap(tnapi, i,
+					 skb_shinfo(skb)->nr_frags - 1);
 
 			dev_kfree_skb_any(skb);
 		}
@@ -9200,7 +9211,7 @@
 {
 	struct tg3 *tp = (struct tg3 *) __opaque;
 
-	if (tp->irq_sync)
+	if (tp->irq_sync || tg3_flag(tp, RESET_TASK_PENDING))
 		goto restart_timer;
 
 	spin_lock(&tp->lock);
@@ -9223,10 +9234,9 @@
 		}
 
 		if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
-			tg3_flag_set(tp, RESTART_TIMER);
 			spin_unlock(&tp->lock);
-			schedule_work(&tp->reset_task);
-			return;
+			tg3_reset_task_schedule(tp);
+			goto restart_timer;
 		}
 	}
 
@@ -9674,15 +9684,14 @@
 		struct tg3_napi *tnapi = &tp->napi[i];
 		err = tg3_request_irq(tp, i);
 		if (err) {
-			for (i--; i >= 0; i--)
+			for (i--; i >= 0; i--) {
+				tnapi = &tp->napi[i];
 				free_irq(tnapi->irq_vec, tnapi);
-			break;
+			}
+			goto err_out2;
 		}
 	}
 
-	if (err)
-		goto err_out2;
-
 	tg3_full_lock(tp, 0);
 
 	err = tg3_init_hw(tp, 1);
@@ -9783,7 +9792,7 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	tg3_napi_disable(tp);
-	cancel_work_sync(&tp->reset_task);
+	tg3_reset_task_cancel(tp);
 
 	netif_tx_stop_all_queues(dev);
 
@@ -11520,7 +11529,7 @@
 			break;
 	}
 
-	tg3_tx_skb_unmap(tnapi, tnapi->tx_prod - 1, 0);
+	tg3_tx_skb_unmap(tnapi, tnapi->tx_prod - 1, -1);
 	dev_kfree_skb(skb);
 
 	if (tx_idx != tnapi->tx_prod)
@@ -14228,12 +14237,30 @@
 	val = tr32(MEMARB_MODE);
 	tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
 
-	if (tg3_flag(tp, PCIX_MODE)) {
-		pci_read_config_dword(tp->pdev,
-				      tp->pcix_cap + PCI_X_STATUS, &val);
-		tp->pci_fn = val & 0x7;
-	} else {
-		tp->pci_fn = PCI_FUNC(tp->pdev->devfn) & 3;
+	tp->pci_fn = PCI_FUNC(tp->pdev->devfn) & 3;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+	    tg3_flag(tp, 5780_CLASS)) {
+		if (tg3_flag(tp, PCIX_MODE)) {
+			pci_read_config_dword(tp->pdev,
+					      tp->pcix_cap + PCI_X_STATUS,
+					      &val);
+			tp->pci_fn = val & 0x7;
+		}
+	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+		tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val);
+		if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) ==
+		    NIC_SRAM_CPMUSTAT_SIG) {
+			tp->pci_fn = val & TG3_CPMU_STATUS_FMSK_5717;
+			tp->pci_fn = tp->pci_fn ? 1 : 0;
+		}
+	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+		   GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+		tg3_read_mem(tp, NIC_SRAM_CPMU_STATUS, &val);
+		if ((val & NIC_SRAM_CPMUSTAT_SIG_MSK) ==
+		    NIC_SRAM_CPMUSTAT_SIG) {
+			tp->pci_fn = (val & TG3_CPMU_STATUS_FMSK_5719) >>
+				     TG3_CPMU_STATUS_FSHFT_5719;
+		}
 	}
 
 	/* Get eeprom hw config before calling tg3_set_power_state().
@@ -15665,7 +15692,7 @@
 		if (tp->fw)
 			release_firmware(tp->fw);
 
-		cancel_work_sync(&tp->reset_task);
+		tg3_reset_task_cancel(tp);
 
 		if (tg3_flag(tp, USE_PHYLIB)) {
 			tg3_phy_fini(tp);
@@ -15699,7 +15726,7 @@
 	if (!netif_running(dev))
 		return 0;
 
-	flush_work_sync(&tp->reset_task);
+	tg3_reset_task_cancel(tp);
 	tg3_phy_stop(tp);
 	tg3_netif_stop(tp);
 
@@ -15812,12 +15839,10 @@
 	tg3_netif_stop(tp);
 
 	del_timer_sync(&tp->timer);
-	tg3_flag_clear(tp, RESTART_TIMER);
 
 	/* Want to make sure that the reset task doesn't run */
-	cancel_work_sync(&tp->reset_task);
+	tg3_reset_task_cancel(tp);
 	tg3_flag_clear(tp, TX_RECOVERY_PENDING);
-	tg3_flag_clear(tp, RESTART_TIMER);
 
 	netif_device_detach(netdev);
 
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index f32f288..94b4bd0 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -1095,6 +1095,11 @@
 #define TG3_CPMU_CLCK_ORIDE		0x00003624
 #define  CPMU_CLCK_ORIDE_MAC_ORIDE_EN	 0x80000000
 
+#define TG3_CPMU_STATUS			0x0000362c
+#define  TG3_CPMU_STATUS_FMSK_5717	 0x20000000
+#define  TG3_CPMU_STATUS_FMSK_5719	 0xc0000000
+#define  TG3_CPMU_STATUS_FSHFT_5719	 30
+
 #define TG3_CPMU_CLCK_STAT		0x00003630
 #define  CPMU_CLCK_STAT_MAC_CLCK_MASK	 0x001f0000
 #define  CPMU_CLCK_STAT_MAC_CLCK_62_5	 0x00000000
@@ -2128,6 +2133,10 @@
 #define  NIC_SRAM_RGMII_EXT_IBND_RX_EN	 0x00000008
 #define  NIC_SRAM_RGMII_EXT_IBND_TX_EN	 0x00000010
 
+#define NIC_SRAM_CPMU_STATUS		0x00000e00
+#define  NIC_SRAM_CPMUSTAT_SIG		0x0000362c
+#define  NIC_SRAM_CPMUSTAT_SIG_MSK	0x0000ffff
+
 #define NIC_SRAM_RX_MINI_BUFFER_DESC	0x00001000
 
 #define NIC_SRAM_DMA_DESC_POOL_BASE	0x00002000
@@ -2344,9 +2353,13 @@
 #define  APE_PER_LOCK_GRANT_DRIVER	 0x00001000
 
 /* APE convenience enumerations. */
-#define TG3_APE_LOCK_GRC                1
-#define TG3_APE_LOCK_MEM                4
-#define TG3_APE_LOCK_GPIO               7
+#define TG3_APE_LOCK_PHY0		0
+#define TG3_APE_LOCK_GRC		1
+#define TG3_APE_LOCK_PHY1		2
+#define TG3_APE_LOCK_PHY2		3
+#define TG3_APE_LOCK_MEM		4
+#define TG3_APE_LOCK_PHY3		5
+#define TG3_APE_LOCK_GPIO		7
 
 #define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
 
@@ -2866,7 +2879,6 @@
 	TG3_FLAG_JUMBO_CAPABLE,
 	TG3_FLAG_CHIP_RESETTING,
 	TG3_FLAG_INIT_COMPLETE,
-	TG3_FLAG_RESTART_TIMER,
 	TG3_FLAG_TSO_BUG,
 	TG3_FLAG_IS_5788,
 	TG3_FLAG_MAX_RXPEND_64,
@@ -2909,6 +2921,7 @@
 	TG3_FLAG_APE_HAS_NCSI,
 	TG3_FLAG_5717_PLUS,
 	TG3_FLAG_4K_FIFO_LIMIT,
+	TG3_FLAG_RESET_TASK_PENDING,
 
 	/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
 	TG3_FLAG_NUMBER_OF_FLAGS,	/* Last entry in enum TG3_FLAGS */
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 5d7872e..7f3091e 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -25,6 +25,7 @@
 #include <linux/if_ether.h>
 #include <linux/ip.h>
 #include <linux/prefetch.h>
+#include <linux/module.h>
 
 #include "bnad.h"
 #include "bna.h"
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 98849a1..b48378a 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -7,6 +7,7 @@
 
 config NET_ATMEL
 	bool "Atmel devices"
+	default y
 	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
index da5a5d9..90ff131 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
@@ -40,6 +40,7 @@
 #include <net/netevent.h>
 #include <linux/highmem.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include "common.h"
 #include "regs.h"
diff --git a/drivers/net/ethernet/chelsio/cxgb3/l2t.c b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
index 4154097..70fec8b 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
@@ -35,6 +35,7 @@
 #include <linux/if_vlan.h>
 #include <linux/jhash.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/neighbour.h>
 #include "common.h"
 #include "t3cdev.h"
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index a2d323c..6ac77a6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -37,6 +37,9 @@
 #include <linux/if.h>
 #include <linux/if_vlan.h>
 #include <linux/jhash.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <net/neighbour.h>
 #include "cxgb4.h"
 #include "l2t.h"
@@ -503,10 +506,6 @@
 	return d;
 }
 
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
 static inline void *l2t_get_idx(struct seq_file *seq, loff_t pos)
 {
 	struct l2t_entry *l2tab = seq->private;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index ddc1698..140254c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -40,6 +40,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/jiffies.h>
 #include <linux/prefetch.h>
+#include <linux/export.h>
 #include <net/ipv6.h>
 #include <net/tcp.h>
 #include "cxgb4.h"
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 6cbb81c..1f8648f 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -6,7 +6,7 @@
 	bool "Cirrus devices"
 	default y
 	depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
-		|| MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX)
+		|| MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -47,4 +47,16 @@
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.
 
+config MAC89x0
+	tristate "Macintosh CS89x0 based ethernet cards"
+	depends on MAC
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards.  If you have a
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called mac89x0.
+
 endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
index 14bd77e..ca245e2 100644
--- a/drivers/net/ethernet/cirrus/Makefile
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
diff --git a/drivers/net/ethernet/apple/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
similarity index 100%
rename from drivers/net/ethernet/apple/mac89x0.c
rename to drivers/net/ethernet/cirrus/mac89x0.c
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 438f458..2a22f52 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -613,7 +613,7 @@
 
 		if (!dm->wake_state)
 			irq_set_irq_wake(dm->irq_wake, 1);
-		else if (dm->wake_state & !opts)
+		else if (dm->wake_state && !opts)
 			irq_set_irq_wake(dm->irq_wake, 0);
 	}
 
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 824b8e6..2c7b366 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -318,8 +318,7 @@
 
 		if (msecs > 4000) {
 			dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
-			if (!lancer_chip(adapter))
-				be_detect_dump_ue(adapter);
+			be_detect_dump_ue(adapter);
 			return -1;
 		}
 
@@ -1540,7 +1539,14 @@
 
 		req->if_flags_mask = req->if_flags =
 				cpu_to_le32(BE_IF_FLAGS_MULTICAST);
-		req->mcast_num = cpu_to_le16(netdev_mc_count(adapter->netdev));
+
+		/* Reset mcast promisc mode if already set by setting mask
+		 * and not setting flags field
+		 */
+		req->if_flags_mask |=
+				cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
+
+		req->mcast_num = cpu_to_le32(netdev_mc_count(adapter->netdev));
 		netdev_for_each_mc_addr(ha, adapter->netdev)
 			memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN);
 	}
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index fbc8a91..f2c89e3 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -48,6 +48,8 @@
 /* Lancer SLIPORT_CONTROL SLIPORT_STATUS registers */
 #define SLIPORT_STATUS_OFFSET		0x404
 #define SLIPORT_CONTROL_OFFSET		0x408
+#define SLIPORT_ERROR1_OFFSET		0x40C
+#define SLIPORT_ERROR2_OFFSET		0x410
 
 #define SLIPORT_STATUS_ERR_MASK		0x80000000
 #define SLIPORT_STATUS_RN_MASK		0x01000000
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 2180497..bf266a0 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/prefetch.h>
+#include <linux/module.h>
 #include "be.h"
 #include "be_cmds.h"
 #include <asm/div64.h>
@@ -1905,6 +1906,8 @@
 		be_rx_stats_update(rxo, rxcp);
 	}
 
+	be_cq_notify(adapter, rx_cq->id, false, work_done);
+
 	/* Refill the queue */
 	if (work_done && atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM)
 		be_post_rx_frags(rxo, GFP_ATOMIC);
@@ -1912,10 +1915,8 @@
 	/* All consumed */
 	if (work_done < budget) {
 		napi_complete(napi);
-		be_cq_notify(adapter, rx_cq->id, true, work_done);
-	} else {
-		/* More to be consumed; continue with interrupts disabled */
-		be_cq_notify(adapter, rx_cq->id, false, work_done);
+		/* Arm CQ */
+		be_cq_notify(adapter, rx_cq->id, true, 0);
 	}
 	return work_done;
 }
@@ -1977,42 +1978,62 @@
 
 void be_detect_dump_ue(struct be_adapter *adapter)
 {
-	u32 ue_status_lo, ue_status_hi, ue_status_lo_mask, ue_status_hi_mask;
+	u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0;
+	u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
 	u32 i;
 
-	pci_read_config_dword(adapter->pdev,
-				PCICFG_UE_STATUS_LOW, &ue_status_lo);
-	pci_read_config_dword(adapter->pdev,
-				PCICFG_UE_STATUS_HIGH, &ue_status_hi);
-	pci_read_config_dword(adapter->pdev,
-				PCICFG_UE_STATUS_LOW_MASK, &ue_status_lo_mask);
-	pci_read_config_dword(adapter->pdev,
-				PCICFG_UE_STATUS_HI_MASK, &ue_status_hi_mask);
+	if (lancer_chip(adapter)) {
+		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
+		if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
+			sliport_err1 = ioread32(adapter->db +
+					SLIPORT_ERROR1_OFFSET);
+			sliport_err2 = ioread32(adapter->db +
+					SLIPORT_ERROR2_OFFSET);
+		}
+	} else {
+		pci_read_config_dword(adapter->pdev,
+				PCICFG_UE_STATUS_LOW, &ue_lo);
+		pci_read_config_dword(adapter->pdev,
+				PCICFG_UE_STATUS_HIGH, &ue_hi);
+		pci_read_config_dword(adapter->pdev,
+				PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask);
+		pci_read_config_dword(adapter->pdev,
+				PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask);
 
-	ue_status_lo = (ue_status_lo & (~ue_status_lo_mask));
-	ue_status_hi = (ue_status_hi & (~ue_status_hi_mask));
+		ue_lo = (ue_lo & (~ue_lo_mask));
+		ue_hi = (ue_hi & (~ue_hi_mask));
+	}
 
-	if (ue_status_lo || ue_status_hi) {
+	if (ue_lo || ue_hi ||
+		sliport_status & SLIPORT_STATUS_ERR_MASK) {
 		adapter->ue_detected = true;
 		adapter->eeh_err = true;
 		dev_err(&adapter->pdev->dev, "UE Detected!!\n");
 	}
 
-	if (ue_status_lo) {
-		for (i = 0; ue_status_lo; ue_status_lo >>= 1, i++) {
-			if (ue_status_lo & 1)
+	if (ue_lo) {
+		for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+			if (ue_lo & 1)
 				dev_err(&adapter->pdev->dev,
 				"UE: %s bit set\n", ue_status_low_desc[i]);
 		}
 	}
-	if (ue_status_hi) {
-		for (i = 0; ue_status_hi; ue_status_hi >>= 1, i++) {
-			if (ue_status_hi & 1)
+	if (ue_hi) {
+		for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+			if (ue_hi & 1)
 				dev_err(&adapter->pdev->dev,
 				"UE: %s bit set\n", ue_status_hi_desc[i]);
 		}
 	}
 
+	if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
+		dev_err(&adapter->pdev->dev,
+			"sliport status 0x%x\n", sliport_status);
+		dev_err(&adapter->pdev->dev,
+			"sliport error1 0x%x\n", sliport_err1);
+		dev_err(&adapter->pdev->dev,
+			"sliport error2 0x%x\n", sliport_err2);
+	}
 }
 
 static void be_worker(struct work_struct *work)
@@ -2022,7 +2043,7 @@
 	struct be_rx_obj *rxo;
 	int i;
 
-	if (!adapter->ue_detected && !lancer_chip(adapter))
+	if (!adapter->ue_detected)
 		be_detect_dump_ue(adapter);
 
 	/* when interrupts are not yet enabled, just reap any pending
diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index bdb348a..251b635f 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -22,6 +22,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/module.h>
 #include <net/ethoc.h>
 
 static int buffer_size = 0x8000; /* 32 KBytes */
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 1cf6716..5272f9d 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -7,8 +7,7 @@
 	default y
 	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 		   M523x || M527x || M5272 || M528x || M520x || M532x || \
-		   ARCH_MXC || ARCH_MXS || \
-		   (PPC_MPC52xx && PPC_BESTCOMM)
+		   ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -25,6 +24,7 @@
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
 		   ARCH_MXC || ARCH_MXS)
+	default ARCH_MXC || ARCH_MXS if ARM
 	select PHYLIB
 	---help---
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 46d690a..b5dc027 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/stddef.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c
index 40e1a17..ba82a26 100644
--- a/drivers/net/ethernet/i825xx/3c505.c
+++ b/drivers/net/ethernet/i825xx/3c505.c
@@ -126,15 +126,13 @@
  *
  *********************************************************/
 
-#define filename __FILE__
-
 #define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
 #define TIMEOUT_MSG(lineno) \
-	pr_notice(timeout_msg, filename, __func__, (lineno))
+	pr_notice(timeout_msg, __FILE__, __func__, (lineno))
 
 #define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
 #define INVALID_PCB_MSG(len) \
-	pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
+	pr_notice(invalid_pcb_msg, (len), __FILE__, __func__, __LINE__)
 
 #define search_msg "%s: Looking for 3c505 adapter at address %#x..."
 
diff --git a/drivers/net/ethernet/ibm/ehea/ehea.h b/drivers/net/ethernet/ibm/ehea/ehea.h
index 410d6a1..6650068 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea.h
+++ b/drivers/net/ethernet/ibm/ehea/ehea.h
@@ -61,9 +61,9 @@
 #ifdef EHEA_SMALL_QUEUES
 #define EHEA_MAX_CQE_COUNT      1023
 #define EHEA_DEF_ENTRIES_SQ     1023
-#define EHEA_DEF_ENTRIES_RQ1    4095
+#define EHEA_DEF_ENTRIES_RQ1    1023
 #define EHEA_DEF_ENTRIES_RQ2    1023
-#define EHEA_DEF_ENTRIES_RQ3    1023
+#define EHEA_DEF_ENTRIES_RQ3    511
 #else
 #define EHEA_MAX_CQE_COUNT      4080
 #define EHEA_DEF_ENTRIES_SQ     4080
diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 37b70f7..bfeccbf 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -371,7 +371,8 @@
 out_herr:
 	free_page((unsigned long)cb2);
 resched:
-	schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000));
+	schedule_delayed_work(&port->stats_work,
+			      round_jiffies_relative(msecs_to_jiffies(1000)));
 }
 
 static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
@@ -2434,7 +2435,8 @@
 	}
 
 	mutex_unlock(&port->port_lock);
-	schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000));
+	schedule_delayed_work(&port->stats_work,
+			      round_jiffies_relative(msecs_to_jiffies(1000)));
 
 	return ret;
 }
diff --git a/drivers/net/ethernet/ibm/iseries_veth.c b/drivers/net/ethernet/ibm/iseries_veth.c
index 4326681..acc31af 100644
--- a/drivers/net/ethernet/ibm/iseries_veth.c
+++ b/drivers/net/ethernet/ibm/iseries_veth.c
@@ -1421,7 +1421,7 @@
 
 		/* FIXME: do we need this? */
 		memset(local_list, 0, sizeof(local_list));
-		memset(remote_list, 0, sizeof(VETH_MAX_FRAMES_PER_MSG));
+		memset(remote_list, 0, sizeof(remote_list));
 
 		/* a 0 address marks the end of the valid entries */
 		if (senddata->addr[startchunk] == 0)
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 61029dc..7621316 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -5,7 +5,11 @@
 config NET_VENDOR_INTEL
 	bool "Intel devices"
 	default y
-	depends on PCI || PCI_MSI
+	depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
+		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+		   GSC || BVME6000 || MVME16x || ARCH_ENP2611 || \
+		   (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
+		   EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index ae17cd1..5a2fdf7 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2810,6 +2810,10 @@
 
 	e100_get_defaults(nic);
 
+	/* D100 MAC doesn't allow rx of vlan packets with normal MTU */
+	if (nic->mac < mac_82558_D101_A4)
+		netdev->features |= NETIF_F_VLAN_CHALLENGED;
+
 	/* locks must be initialized before calling hw_reset */
 	spin_lock_init(&nic->cb_lock);
 	spin_lock_init(&nic->cmd_lock);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 6a17c62..e2a80a2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -866,8 +866,7 @@
 
 	if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE,
 			     &hw->adapter->state)) {
-		WARN(1, "e1000e: %s: contention for Phy access\n",
-		     hw->adapter->netdev->name);
+		e_dbg("contention for Phy access\n");
 		return -E1000_ERR_PHY;
 	}
 
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 4dd9b63..20e93b0 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -27,6 +27,7 @@
 *******************************************************************************/
 
 #include <linux/netdevice.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 
 #include "e1000.h"
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 7edf31e..b17d7c2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1687,7 +1687,7 @@
 		if (ret_val)
 			goto out;
 
-		is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
 
 		/* Populate the phy structure with cable length in meters */
 		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 834f044..f1365fe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3344,7 +3344,7 @@
 static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 					u32 length)
 {
-	u32 hicr, i;
+	u32 hicr, i, bi;
 	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
 	u8 buf_len, dword_len;
 
@@ -3398,9 +3398,9 @@
 	dword_len = hdr_size >> 2;
 
 	/* first pull in the header so we know the buffer length */
-	for (i = 0; i < dword_len; i++) {
-		buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
-		le32_to_cpus(&buffer[i]);
+	for (bi = 0; bi < dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		le32_to_cpus(&buffer[bi]);
 	}
 
 	/* If there is any thing in data position pull it in */
@@ -3414,12 +3414,14 @@
 		goto out;
 	}
 
-	/* Calculate length in DWORDs, add one for odd lengths */
-	dword_len = (buf_len + 1) >> 2;
+	/* Calculate length in DWORDs, add 3 for odd lengths */
+	dword_len = (buf_len + 3) >> 2;
 
-	/* Pull in the rest of the buffer (i is where we left off)*/
-	for (; i < buf_len; i++)
-		buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+	/* Pull in the rest of the buffer (bi is where we left off)*/
+	for (; bi <= dword_len; bi++) {
+		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+		le32_to_cpus(&buffer[bi]);
+	}
 
 out:
 	return ret_val;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 3631d63..33b93ff 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -561,11 +561,12 @@
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets;
 
+	ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs;
+
 	/* No IEEE PFC settings available */
 	if (!my_ets)
-		return -EINVAL;
+		return 0;
 
-	ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs;
 	ets->cbs = my_ets->cbs;
 	memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
 	memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw));
@@ -621,11 +622,12 @@
 	struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc;
 	int i;
 
+	pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs;
+
 	/* No IEEE PFC settings available */
 	if (!my_pfc)
-		return -EINVAL;
+		return 0;
 
-	pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs;
 	pfc->pfc_en = my_pfc->pfc_en;
 	pfc->mbc = my_pfc->mbc;
 	pfc->delay = my_pfc->delay;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 09b8e88..8ef92d1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3345,34 +3345,25 @@
 
 	hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
 
+#ifdef IXGBE_FCOE
+	if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+		max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+
 	/* reconfigure the hardware */
 	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
-#ifdef IXGBE_FCOE
-		if (adapter->netdev->features & NETIF_F_FCOE_MTU)
-			max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
-#endif
 		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
 						DCB_TX_CONFIG);
 		ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
 						DCB_RX_CONFIG);
 		ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
-	} else {
-		struct net_device *dev = adapter->netdev;
-
-		if (adapter->ixgbe_ieee_ets) {
-			struct ieee_ets *ets = adapter->ixgbe_ieee_ets;
-			int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
-
-			ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
-		}
-
-		if (adapter->ixgbe_ieee_pfc) {
-			struct ieee_pfc *pfc = adapter->ixgbe_ieee_pfc;
-			u8 *prio_tc = adapter->ixgbe_ieee_ets->prio_tc;
-
-			ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en,
-						prio_tc);
-		}
+	} else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) {
+		ixgbe_dcb_hw_ets(&adapter->hw,
+				 adapter->ixgbe_ieee_ets,
+				 max_frame);
+		ixgbe_dcb_hw_pfc_config(&adapter->hw,
+					adapter->ixgbe_ieee_pfc->pfc_en,
+					adapter->ixgbe_ieee_ets->prio_tc);
 	}
 
 	/* Enable RSS Hash per TC */
@@ -6125,7 +6116,6 @@
 	autoneg = hw->phy.autoneg_advertised;
 	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
 		hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
-	hw->mac.autotry_restart = false;
 	if (hw->mac.ops.setup_link)
 		hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
 
@@ -7589,13 +7579,6 @@
 		goto err_eeprom;
 	}
 
-	/* power down the optics for multispeed fiber and 82599 SFP+ fiber */
-	if (hw->mac.ops.disable_tx_laser &&
-	    ((hw->phy.multispeed_fiber) ||
-	     ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
-	      (hw->mac.type == ixgbe_mac_82599EB))))
-		hw->mac.ops.disable_tx_laser(hw);
-
 	setup_timer(&adapter->service_timer, &ixgbe_service_timer,
 	            (unsigned long) adapter);
 
@@ -7693,6 +7676,13 @@
 	if (err)
 		goto err_register;
 
+	/* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+	if (hw->mac.ops.disable_tx_laser &&
+	    ((hw->phy.multispeed_fiber) ||
+	     ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	      (hw->mac.type == ixgbe_mac_82599EB))))
+		hw->mac.ops.disable_tx_laser(hw);
+
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index db95731..00fcd39 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -442,12 +442,14 @@
 
 int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter)
 {
+#ifdef CONFIG_PCI_IOV
 	int i;
 	for (i = 0; i < adapter->num_vfs; i++) {
 		if (adapter->vfinfo[i].vfdev->dev_flags &
 				PCI_DEV_FLAGS_ASSIGNED)
 			return true;
 	}
+#endif
 	return false;
 }
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 5a7e1eb..df04f1a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -43,9 +43,11 @@
 			    int vf, struct ifla_vf_info *ivi);
 void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
 void ixgbe_disable_sriov(struct ixgbe_adapter *adapter);
+int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
+#ifdef CONFIG_PCI_IOV
 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
 			const struct ixgbe_info *ii);
-int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
+#endif
 
 
 #endif /* _IXGBE_SRIOV_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 5e92cc2..4c8e199 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -54,7 +54,7 @@
 static const char ixgbevf_driver_string[] =
 	"Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver";
 
-#define DRV_VERSION "2.1.0-k"
+#define DRV_VERSION "2.2.0-k"
 const char ixgbevf_driver_version[] = DRV_VERSION;
 static char ixgbevf_copyright[] =
 	"Copyright (c) 2009 - 2010 Intel Corporation.";
diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 7becff1..76b8457 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1745,6 +1745,112 @@
 }
 
 static int
+jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg)
+{
+	u32 phy_addr;
+
+	phy_addr = JM_PHY_SPEC_REG_READ | specreg;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+			phy_addr);
+	return jme_mdio_read(jme->dev, jme->mii_if.phy_id,
+			JM_PHY_SPEC_DATA_REG);
+}
+
+static void
+jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data)
+{
+	u32 phy_addr;
+
+	phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG,
+			phy_data);
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+			phy_addr);
+}
+
+static int
+jme_phy_calibration(struct jme_adapter *jme)
+{
+	u32 ctrl1000, phy_data;
+
+	jme_phy_off(jme);
+	jme_phy_on(jme);
+	/*  Enabel PHY test mode 1 */
+	ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+	ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+	ctrl1000 |= PHY_GAD_TEST_MODE_1;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+
+	phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG);
+	phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0;
+	phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH |
+			JM_PHY_EXT_COMM_2_CALI_ENABLE;
+	jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+	msleep(20);
+	phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG);
+	phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE |
+			JM_PHY_EXT_COMM_2_CALI_MODE_0 |
+			JM_PHY_EXT_COMM_2_CALI_LATCH);
+	jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+
+	/*  Disable PHY test mode */
+	ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+	ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+	return 0;
+}
+
+static int
+jme_phy_setEA(struct jme_adapter *jme)
+{
+	u32 phy_comm0 = 0, phy_comm1 = 0;
+	u8 nic_ctrl;
+
+	pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl);
+	if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE)
+		return 0;
+
+	switch (jme->pdev->device) {
+	case PCI_DEVICE_ID_JMICRON_JMC250:
+		if (((jme->chip_main_rev == 5) &&
+			((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+			(jme->chip_sub_rev == 3))) ||
+			(jme->chip_main_rev >= 6)) {
+			phy_comm0 = 0x008A;
+			phy_comm1 = 0x4109;
+		}
+		if ((jme->chip_main_rev == 3) &&
+			((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+			phy_comm0 = 0xE088;
+		break;
+	case PCI_DEVICE_ID_JMICRON_JMC260:
+		if (((jme->chip_main_rev == 5) &&
+			((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+			(jme->chip_sub_rev == 3))) ||
+			(jme->chip_main_rev >= 6)) {
+			phy_comm0 = 0x008A;
+			phy_comm1 = 0x4109;
+		}
+		if ((jme->chip_main_rev == 3) &&
+			((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+			phy_comm0 = 0xE088;
+		if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0))
+			phy_comm0 = 0x608A;
+		if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2))
+			phy_comm0 = 0x408A;
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (phy_comm0)
+		jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0);
+	if (phy_comm1)
+		jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1);
+
+	return 0;
+}
+
+static int
 jme_open(struct net_device *netdev)
 {
 	struct jme_adapter *jme = netdev_priv(netdev);
@@ -1769,7 +1875,8 @@
 		jme_set_settings(netdev, &jme->old_ecmd);
 	else
 		jme_reset_phy_processor(jme);
-
+	jme_phy_calibration(jme);
+	jme_phy_setEA(jme);
 	jme_reset_link(jme);
 
 	return 0;
@@ -3184,7 +3291,8 @@
 		jme_set_settings(netdev, &jme->old_ecmd);
 	else
 		jme_reset_phy_processor(jme);
-
+	jme_phy_calibration(jme);
+	jme_phy_setEA(jme);
 	jme_start_irq(jme);
 	netif_device_attach(netdev);
 
@@ -3239,4 +3347,3 @@
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, jme_pci_tbl);
-
diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h
index 02ea27c..4304072b 100644
--- a/drivers/net/ethernet/jme.h
+++ b/drivers/net/ethernet/jme.h
@@ -760,6 +760,25 @@
 				  RXMCS_CHECKSUM,
 };
 
+/*	Extern PHY common register 2	*/
+
+#define PHY_GAD_TEST_MODE_1			0x00002000
+#define PHY_GAD_TEST_MODE_MSK			0x0000E000
+#define JM_PHY_SPEC_REG_READ			0x00004000
+#define JM_PHY_SPEC_REG_WRITE			0x00008000
+#define PHY_CALIBRATION_DELAY			20
+#define JM_PHY_SPEC_ADDR_REG			0x1E
+#define JM_PHY_SPEC_DATA_REG			0x1F
+
+#define JM_PHY_EXT_COMM_0_REG			0x30
+#define JM_PHY_EXT_COMM_1_REG			0x31
+#define JM_PHY_EXT_COMM_2_REG			0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE		0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0		0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH		0x10
+#define PCI_PRIV_SHARE_NICCTRL			0xF5
+#define JME_FLAG_PHYEA_ENABLE			0x2
+
 /*
  * Wakeup Frame setup interface registers
  */
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 6bb2b95..0b3567a 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -34,6 +34,8 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include <asm/checksum.h>
 
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index cbd026f..7803efa 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.29"
+#define DRV_VERSION		"1.30"
 
 /*
  * The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -68,7 +68,7 @@
 #define MAX_SKB_TX_LE	(2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
 #define TX_MIN_PENDING		(MAX_SKB_TX_LE+1)
 #define TX_MAX_PENDING		1024
-#define TX_DEF_PENDING		127
+#define TX_DEF_PENDING		63
 
 #define TX_WATCHDOG		(5 * HZ)
 #define NAPI_WEIGHT		64
@@ -366,17 +366,6 @@
 				gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
 			}
 		} else {
-			if (hw->chip_id >= CHIP_ID_YUKON_OPT) {
-				u16 ctrl2 = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL_2);
-
-				/* enable PHY Reverse Auto-Negotiation */
-				ctrl2 |= 1u << 13;
-
-				/* Write PHY changes (SW-reset must follow) */
-				gm_phy_write(hw, port, PHY_MARV_EXT_CTRL_2, ctrl2);
-			}
-
-
 			/* disable energy detect */
 			ctrl &= ~PHY_M_PC_EN_DET_MSK;
 
@@ -880,6 +869,7 @@
 
 	/* block receiver */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+	sky2_read32(hw, B0_CTST);
 }
 
 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
@@ -1285,6 +1275,14 @@
 		     ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
 }
 
+/*
+ * Fixed initial key as seed to RSS.
+ */
+static const uint32_t rss_init_key[10] = {
+	0x7c3351da, 0x51c5cf4e,	0x44adbdd1, 0xe8d38d18,	0x48897c43,
+	0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30
+};
+
 /* Enable/disable receive hash calculation (RSS) */
 static void rx_set_rss(struct net_device *dev, u32 features)
 {
@@ -1300,12 +1298,9 @@
 
 	/* Program RSS initial values */
 	if (features & NETIF_F_RXHASH) {
-		u32 key[nkeys];
-
-		get_random_bytes(key, nkeys * sizeof(u32));
 		for (i = 0; i < nkeys; i++)
 			sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
-				     key[i]);
+				     rss_init_key[i]);
 
 		/* Need to turn on (undocumented) flag to make hashing work  */
 		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
@@ -1728,6 +1723,8 @@
 	if (err)
 		dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
 	else {
+		hw->flags |= SKY2_HW_IRQ_SETUP;
+
 		napi_enable(&hw->napi);
 		sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 		sky2_read32(hw, B0_IMSK);
@@ -1738,7 +1735,7 @@
 
 
 /* Bring up network interface. */
-static int sky2_up(struct net_device *dev)
+static int sky2_open(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
@@ -1758,6 +1755,11 @@
 
 	sky2_hw_up(sky2);
 
+	if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+	    hw->chip_id == CHIP_ID_YUKON_PRM ||
+	    hw->chip_id == CHIP_ID_YUKON_OP_2)
+		imask |= Y2_IS_PHY_QLNK;	/* enable PHY Quick Link */
+
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
 	imask |= portirq_msk[port];
@@ -2051,6 +2053,8 @@
 
 	sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+	sky2_read32(hw, B0_CTST);
 }
 
 static void sky2_hw_down(struct sky2_port *sky2)
@@ -2101,7 +2105,7 @@
 }
 
 /* Network shutdown */
-static int sky2_down(struct net_device *dev)
+static int sky2_close(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
@@ -2112,15 +2116,22 @@
 
 	netif_info(sky2, ifdown, dev, "disabling interface\n");
 
-	/* Disable port IRQ */
-	sky2_write32(hw, B0_IMSK,
-		     sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
-	sky2_read32(hw, B0_IMSK);
-
 	if (hw->ports == 1) {
+		sky2_write32(hw, B0_IMSK, 0);
+		sky2_read32(hw, B0_IMSK);
+
 		napi_disable(&hw->napi);
 		free_irq(hw->pdev->irq, hw);
+		hw->flags &= ~SKY2_HW_IRQ_SETUP;
 	} else {
+		u32 imask;
+
+		/* Disable port IRQ */
+		imask  = sky2_read32(hw, B0_IMSK);
+		imask &= ~portirq_msk[sky2->port];
+		sky2_write32(hw, B0_IMSK, imask);
+		sky2_read32(hw, B0_IMSK);
+
 		synchronize_irq(hw->pdev->irq);
 		napi_synchronize(&hw->napi);
 	}
@@ -2598,7 +2609,7 @@
 	if (netif_running(dev)) {
 		sky2_tx_complete(sky2, last);
 
-		/* Wake unless it's detached, and called e.g. from sky2_down() */
+		/* Wake unless it's detached, and called e.g. from sky2_close() */
 		if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
 			netif_wake_queue(dev);
 	}
@@ -3269,7 +3280,6 @@
 	    hw->chip_id == CHIP_ID_YUKON_PRM ||
 	    hw->chip_id == CHIP_ID_YUKON_OP_2) {
 		u16 reg;
-		u32 msk;
 
 		if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
 			/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
@@ -3292,11 +3302,6 @@
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
 
-		/* enable PHY Quick Link */
-		msk = sky2_read32(hw, B0_IMSK);
-		msk |= Y2_IS_PHY_QLNK;
-		sky2_write32(hw, B0_IMSK, msk);
-
 		/* check if PSMv2 was running before */
 		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
 		if (reg & PCI_EXP_LNKCTL_ASPMC)
@@ -3394,7 +3399,7 @@
 		netif_tx_lock(dev);
 		netif_device_detach(dev);	/* stop txq */
 		netif_tx_unlock(dev);
-		sky2_down(dev);
+		sky2_close(dev);
 	}
 }
 
@@ -3404,7 +3409,7 @@
 	int err = 0;
 
 	if (netif_running(dev)) {
-		err = sky2_up(dev);
+		err = sky2_open(dev);
 		if (err) {
 			netdev_info(dev, "could not restart %d\n", err);
 			dev_close(dev);
@@ -3421,10 +3426,13 @@
 {
 	int i;
 
-	sky2_read32(hw, B0_IMSK);
-	sky2_write32(hw, B0_IMSK, 0);
-	synchronize_irq(hw->pdev->irq);
-	napi_disable(&hw->napi);
+	if (hw->flags & SKY2_HW_IRQ_SETUP) {
+		sky2_read32(hw, B0_IMSK);
+		sky2_write32(hw, B0_IMSK, 0);
+
+		synchronize_irq(hw->pdev->irq);
+		napi_disable(&hw->napi);
+	}
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
@@ -3457,11 +3465,12 @@
 		netif_wake_queue(dev);
 	}
 
-	sky2_write32(hw, B0_IMSK, imask);
-	sky2_read32(hw, B0_IMSK);
-
-	sky2_read32(hw, B0_Y2_SP_LISR);
-	napi_enable(&hw->napi);
+	if (hw->flags & SKY2_HW_IRQ_SETUP) {
+		sky2_write32(hw, B0_IMSK, imask);
+		sky2_read32(hw, B0_IMSK);
+		sky2_read32(hw, B0_Y2_SP_LISR);
+		napi_enable(&hw->napi);
+	}
 }
 
 static void sky2_restart(struct work_struct *work)
@@ -4082,6 +4091,16 @@
 	return 0;
 }
 
+/*
+ * Hardware is limited to min of 128 and max of 2048 for ring size
+ * and  rounded up to next power of two
+ * to avoid division in modulus calclation
+ */
+static unsigned long roundup_ring_size(unsigned long pending)
+{
+	return max(128ul, roundup_pow_of_two(pending+1));
+}
+
 static void sky2_get_ringparam(struct net_device *dev,
 			       struct ethtool_ringparam *ering)
 {
@@ -4109,7 +4128,7 @@
 
 	sky2->rx_pending = ering->rx_pending;
 	sky2->tx_pending = ering->tx_pending;
-	sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
+	sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
 
 	return sky2_reattach(dev);
 }
@@ -4567,7 +4586,7 @@
 	struct net_device *dev = ptr;
 	struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
+	if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
 		return NOTIFY_DONE;
 
 	switch (event) {
@@ -4632,8 +4651,8 @@
    not allowing netpoll on second port */
 static const struct net_device_ops sky2_netdev_ops[2] = {
   {
-	.ndo_open		= sky2_up,
-	.ndo_stop		= sky2_down,
+	.ndo_open		= sky2_open,
+	.ndo_stop		= sky2_close,
 	.ndo_start_xmit		= sky2_xmit_frame,
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -4649,8 +4668,8 @@
 #endif
   },
   {
-	.ndo_open		= sky2_up,
-	.ndo_stop		= sky2_down,
+	.ndo_open		= sky2_open,
+	.ndo_stop		= sky2_close,
 	.ndo_start_xmit		= sky2_xmit_frame,
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -4703,7 +4722,7 @@
 	spin_lock_init(&sky2->phy_lock);
 
 	sky2->tx_pending = TX_DEF_PENDING;
-	sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
+	sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
 	sky2->rx_pending = RX_DEF_PENDING;
 
 	hw->dev[port] = dev;
diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index 0af31b8..ff6f58b 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -2287,6 +2287,7 @@
 #define SKY2_HW_RSS_BROKEN	0x00000100
 #define SKY2_HW_VLAN_BROKEN     0x00000200
 #define SKY2_HW_RSS_CHKSUM	0x00000400	/* RSS requires chksum */
+#define SKY2_HW_IRQ_SETUP	0x00000800
 
 	u8	     	     chip_id;
 	u8		     chip_rev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 116cae3..8be20e7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
@@ -34,6 +34,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
+#include <linux/export.h>
 #include <linux/bitmap.h>
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 32f9471..45aea9c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/workqueue.h>
+#include <linux/module.h>
 
 #include "mlx4.h"
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 23cee7b..78f5a1a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -34,6 +34,7 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/errno.h>
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index bd8ef9f..499a516 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -35,6 +35,7 @@
  */
 
 #include <linux/hardirq.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 
 #include <linux/mlx4/cmd.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index b89c36d..c2df6c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -581,6 +581,7 @@
 		 * Packet is OK - process it.
 		 */
 		length = be32_to_cpu(cqe->byte_cnt);
+		length -= ring->fcs_del;
 		ring->bytes += length;
 		ring->packets++;
 
@@ -813,8 +814,11 @@
 	context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
 
 	/* Cancel FCS removal if FW allows */
-	if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP)
+	if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) {
 		context->param3 |= cpu_to_be32(1 << 29);
+		ring->fcs_del = ETH_FCS_LEN;
+	} else
+		ring->fcs_del = 0;
 
 	err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state);
 	if (err) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 90f2cd2..d901b42 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -39,6 +39,7 @@
 #include <linux/if_vlan.h>
 #include <linux/vmalloc.h>
 #include <linux/tcp.h>
+#include <linux/moduleparam.h>
 
 #include "mlx4_en.h"
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 869a2c2..24ee967 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -33,6 +33,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index abdfbac..435ca6e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/mlx4/cmd.h>
+#include <linux/module.h>
 #include <linux/cache.h>
 
 #include "fw.h"
diff --git a/drivers/net/ethernet/mellanox/mlx4/intf.c b/drivers/net/ethernet/mellanox/mlx4/intf.c
index 73c94fc..ca6feb5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/intf.c
+++ b/drivers/net/ethernet/mellanox/mlx4/intf.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "mlx4.h"
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index cd17845..978688c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -35,6 +35,7 @@
 #include <linux/etherdevice.h>
 
 #include <linux/mlx4/cmd.h>
+#include <linux/export.h>
 
 #include "mlx4.h"
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 8fda331c..207b5ad 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -272,6 +272,7 @@
 	u32 prod;
 	u32 cons;
 	u32 buf_size;
+	u8  fcs_del;
 	void *buf;
 	void *rx_info;
 	unsigned long bytes;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index ab639cf..efa3e77 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 
 #include <linux/mlx4/cmd.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/pd.c b/drivers/net/ethernet/mellanox/mlx4/pd.c
index 3736163..260ed25 100644
--- a/drivers/net/ethernet/mellanox/mlx4/pd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/pd.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/io-mapping.h>
 
 #include <asm/page.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c
index a44f080..d942aea 100644
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -32,6 +32,7 @@
 
 #include <linux/errno.h>
 #include <linux/if_ether.h>
+#include <linux/export.h>
 
 #include <linux/mlx4/cmd.h>
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index 51c5389..15f870c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -34,6 +34,7 @@
  */
 
 #include <linux/gfp.h>
+#include <linux/export.h>
 #include <linux/mlx4/cmd.h>
 #include <linux/mlx4/qp.h>
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c
index a20b141..9cbf3fc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/srq.c
@@ -32,6 +32,7 @@
  */
 
 #include <linux/mlx4/cmd.h>
+#include <linux/export.h>
 #include <linux/gfp.h>
 
 #include "mlx4.h"
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
index 4a6b9fd..eb836f7 100644
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -5,7 +5,10 @@
 config NET_VENDOR_NATSEMI
 	bool "National Semi-conductor devices"
 	default y
-	depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+	depends on AMIGA_PCMCIA || ARM || EISA || EXPERIMENTAL || H8300 || \
+		   ISA || M32R || MAC || MACH_JAZZ || MACH_TX49XX || MCA || \
+		   MCA_LEGACY || MIPS || PCI || PCMCIA || SUPERH || \
+		   XTENSA_PLATFORM_XT2000 || ZORRO
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 671e166..a83197d 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -55,6 +55,7 @@
 #include <linux/firmware.h>
 #include <linux/net_tstamp.h>
 #include <linux/prefetch.h>
+#include <linux/module.h>
 #include "vxge-main.h"
 #include "vxge-reg.h"
 
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 1e37eb9..1c61d36 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -609,7 +609,7 @@
 };
 
 static const struct nv_ethtool_str nv_estats_str[] = {
-	{ "tx_bytes" },
+	{ "tx_bytes" }, /* includes Ethernet FCS CRC */
 	{ "tx_zero_rexmt" },
 	{ "tx_one_rexmt" },
 	{ "tx_many_rexmt" },
@@ -637,7 +637,7 @@
 	/* version 2 stats */
 	{ "tx_deferral" },
 	{ "tx_packets" },
-	{ "rx_bytes" },
+	{ "rx_bytes" }, /* includes Ethernet FCS CRC */
 	{ "tx_pause" },
 	{ "rx_pause" },
 	{ "rx_drop_frame" },
@@ -649,7 +649,7 @@
 };
 
 struct nv_ethtool_stats {
-	u64 tx_bytes;
+	u64 tx_bytes; /* should be ifconfig->tx_bytes + 4*tx_packets */
 	u64 tx_zero_rexmt;
 	u64 tx_one_rexmt;
 	u64 tx_many_rexmt;
@@ -670,14 +670,14 @@
 	u64 rx_unicast;
 	u64 rx_multicast;
 	u64 rx_broadcast;
-	u64 rx_packets;
+	u64 rx_packets; /* should be ifconfig->rx_packets */
 	u64 rx_errors_total;
 	u64 tx_errors_total;
 
 	/* version 2 stats */
 	u64 tx_deferral;
-	u64 tx_packets;
-	u64 rx_bytes;
+	u64 tx_packets; /* should be ifconfig->tx_packets */
+	u64 rx_bytes;   /* should be ifconfig->rx_bytes + 4*rx_packets */
 	u64 tx_pause;
 	u64 rx_pause;
 	u64 rx_drop_frame;
@@ -1682,6 +1682,7 @@
 		np->estats.tx_pause += readl(base + NvRegTxPause);
 		np->estats.rx_pause += readl(base + NvRegRxPause);
 		np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
+		np->estats.rx_errors_total += np->estats.rx_drop_frame;
 	}
 
 	if (np->driver_data & DEV_HAS_STATISTICS_V3) {
@@ -1705,12 +1706,22 @@
 	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
 		nv_get_hw_stats(dev);
 
+		/*
+		 * Note: because HW stats are not always available and
+		 * for consistency reasons, the following ifconfig
+		 * stats are managed by software: rx_bytes, tx_bytes,
+		 * rx_packets and tx_packets. The related hardware
+		 * stats reported by ethtool should be equivalent to
+		 * these ifconfig stats, with 4 additional bytes per
+		 * packet (Ethernet FCS CRC).
+		 */
+
 		/* copy to net_device stats */
-		dev->stats.tx_bytes = np->estats.tx_bytes;
 		dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
 		dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
 		dev->stats.rx_crc_errors = np->estats.rx_crc_errors;
 		dev->stats.rx_over_errors = np->estats.rx_over_errors;
+		dev->stats.rx_fifo_errors = np->estats.rx_drop_frame;
 		dev->stats.rx_errors = np->estats.rx_errors_total;
 		dev->stats.tx_errors = np->estats.tx_errors_total;
 	}
@@ -2099,10 +2110,10 @@
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
-		u32 size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+		u32 frag_size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
 
-		entries += (size >> NV_TX2_TSO_MAX_SHIFT) +
-			   ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+		entries += (frag_size >> NV_TX2_TSO_MAX_SHIFT) +
+			   ((frag_size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	}
 
 	spin_lock_irqsave(&np->lock, flags);
@@ -2141,13 +2152,13 @@
 	/* setup the fragments */
 	for (i = 0; i < fragments; i++) {
 		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		u32 size = skb_frag_size(frag);
+		u32 frag_size = skb_frag_size(frag);
 		offset = 0;
 
 		do {
 			prev_tx = put_tx;
 			prev_tx_ctx = np->put_tx_ctx;
-			bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+			bcnt = (frag_size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : frag_size;
 			np->put_tx_ctx->dma = skb_frag_dma_map(
 							&np->pci_dev->dev,
 							frag, offset,
@@ -2159,12 +2170,12 @@
 			put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 
 			offset += bcnt;
-			size -= bcnt;
+			frag_size -= bcnt;
 			if (unlikely(put_tx++ == np->last_tx.orig))
 				put_tx = np->first_tx.orig;
 			if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
 				np->put_tx_ctx = np->first_tx_ctx;
-		} while (size);
+		} while (frag_size);
 	}
 
 	/* set last fragment flag  */
@@ -2213,10 +2224,10 @@
 
 	/* add fragments to entries count */
 	for (i = 0; i < fragments; i++) {
-		u32 size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+		u32 frag_size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
 
-		entries += (size >> NV_TX2_TSO_MAX_SHIFT) +
-			   ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+		entries += (frag_size >> NV_TX2_TSO_MAX_SHIFT) +
+			   ((frag_size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	}
 
 	spin_lock_irqsave(&np->lock, flags);
@@ -2257,13 +2268,13 @@
 	/* setup the fragments */
 	for (i = 0; i < fragments; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		u32 size = skb_frag_size(frag);
+		u32 frag_size = skb_frag_size(frag);
 		offset = 0;
 
 		do {
 			prev_tx = put_tx;
 			prev_tx_ctx = np->put_tx_ctx;
-			bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+			bcnt = (frag_size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : frag_size;
 			np->put_tx_ctx->dma = skb_frag_dma_map(
 							&np->pci_dev->dev,
 							frag, offset,
@@ -2276,12 +2287,12 @@
 			put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 
 			offset += bcnt;
-			size -= bcnt;
+			frag_size -= bcnt;
 			if (unlikely(put_tx++ == np->last_tx.ex))
 				put_tx = np->first_tx.ex;
 			if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
 				np->put_tx_ctx = np->first_tx_ctx;
-		} while (size);
+		} while (frag_size);
 	}
 
 	/* set last fragment flag  */
@@ -2374,13 +2385,8 @@
 		if (np->desc_ver == DESC_VER_1) {
 			if (flags & NV_TX_LASTPACKET) {
 				if (flags & NV_TX_ERROR) {
-					if (flags & NV_TX_UNDERFLOW)
-						dev->stats.tx_fifo_errors++;
-					if (flags & NV_TX_CARRIERLOST)
-						dev->stats.tx_carrier_errors++;
 					if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
 						nv_legacybackoff_reseed(dev);
-					dev->stats.tx_errors++;
 				} else {
 					dev->stats.tx_packets++;
 					dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
@@ -2392,13 +2398,8 @@
 		} else {
 			if (flags & NV_TX2_LASTPACKET) {
 				if (flags & NV_TX2_ERROR) {
-					if (flags & NV_TX2_UNDERFLOW)
-						dev->stats.tx_fifo_errors++;
-					if (flags & NV_TX2_CARRIERLOST)
-						dev->stats.tx_carrier_errors++;
 					if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
 						nv_legacybackoff_reseed(dev);
-					dev->stats.tx_errors++;
 				} else {
 					dev->stats.tx_packets++;
 					dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
@@ -2434,15 +2435,16 @@
 		nv_unmap_txskb(np, np->get_tx_ctx);
 
 		if (flags & NV_TX2_LASTPACKET) {
-			if (!(flags & NV_TX2_ERROR))
-				dev->stats.tx_packets++;
-			else {
+			if (flags & NV_TX2_ERROR) {
 				if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK)) {
 					if (np->driver_data & DEV_HAS_GEAR_MODE)
 						nv_gear_backoff_reseed(dev);
 					else
 						nv_legacybackoff_reseed(dev);
 				}
+			} else {
+				dev->stats.tx_packets++;
+				dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
 			}
 
 			dev_kfree_skb_any(np->get_tx_ctx->skb);
@@ -2636,7 +2638,6 @@
 					if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
-							dev->stats.rx_errors++;
 							dev_kfree_skb(skb);
 							goto next_pkt;
 						}
@@ -2650,11 +2651,6 @@
 					else {
 						if (flags & NV_RX_MISSEDFRAME)
 							dev->stats.rx_missed_errors++;
-						if (flags & NV_RX_CRCERR)
-							dev->stats.rx_crc_errors++;
-						if (flags & NV_RX_OVERFLOW)
-							dev->stats.rx_over_errors++;
-						dev->stats.rx_errors++;
 						dev_kfree_skb(skb);
 						goto next_pkt;
 					}
@@ -2670,7 +2666,6 @@
 					if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) {
 						len = nv_getlen(dev, skb->data, len);
 						if (len < 0) {
-							dev->stats.rx_errors++;
 							dev_kfree_skb(skb);
 							goto next_pkt;
 						}
@@ -2682,11 +2677,6 @@
 					}
 					/* the rest are hard errors */
 					else {
-						if (flags & NV_RX2_CRCERR)
-							dev->stats.rx_crc_errors++;
-						if (flags & NV_RX2_OVERFLOW)
-							dev->stats.rx_over_errors++;
-						dev->stats.rx_errors++;
 						dev_kfree_skb(skb);
 						goto next_pkt;
 					}
@@ -2787,7 +2777,6 @@
 				__vlan_hwaccel_put_tag(skb, vid);
 			}
 			napi_gro_receive(&np->napi, skb);
-
 			dev->stats.rx_packets++;
 			dev->stats.rx_bytes += len;
 		} else {
@@ -2962,11 +2951,11 @@
 				struct netdev_hw_addr *ha;
 
 				netdev_for_each_mc_addr(ha, dev) {
-					unsigned char *addr = ha->addr;
+					unsigned char *hw_addr = ha->addr;
 					u32 a, b;
 
-					a = le32_to_cpu(*(__le32 *) addr);
-					b = le16_to_cpu(*(__le16 *) (&addr[4]));
+					a = le32_to_cpu(*(__le32 *) hw_addr);
+					b = le16_to_cpu(*(__le16 *) (&hw_addr[4]));
 					alwaysOn[0] &= a;
 					alwaysOff[0] &= ~a;
 					alwaysOn[1] &= b;
@@ -3398,7 +3387,8 @@
 
 	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_TX_ALL;
-		writel(NVREG_IRQ_TX_ALL, base + NvRegMSIXIrqStatus);
+		writel(events, base + NvRegMSIXIrqStatus);
+		netdev_dbg(dev, "tx irq events: %08x\n", events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3509,7 +3499,8 @@
 
 	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
-		writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
+		writel(events, base + NvRegMSIXIrqStatus);
+		netdev_dbg(dev, "rx irq events: %08x\n", events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3553,7 +3544,8 @@
 
 	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_OTHER;
-		writel(NVREG_IRQ_OTHER, base + NvRegMSIXIrqStatus);
+		writel(events, base + NvRegMSIXIrqStatus);
+		netdev_dbg(dev, "irq events: %08x\n", events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3617,10 +3609,10 @@
 
 	if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
 		events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
-		writel(NVREG_IRQ_TIMER, base + NvRegIrqStatus);
+		writel(events & NVREG_IRQ_TIMER, base + NvRegIrqStatus);
 	} else {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
-		writel(NVREG_IRQ_TIMER, base + NvRegMSIXIrqStatus);
+		writel(events & NVREG_IRQ_TIMER, base + NvRegMSIXIrqStatus);
 	}
 	pci_push(base);
 	if (!(events & NVREG_IRQ_TIMER))
@@ -4566,7 +4558,7 @@
 	struct fe_priv *np = netdev_priv(dev);
 
 	/* update stats */
-	nv_do_stats_poll((unsigned long)dev);
+	nv_get_hw_stats(dev);
 
 	memcpy(buffer, &np->estats, nv_get_sset_count(dev, ETH_SS_STATS)*sizeof(u64));
 }
diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
index bc1d946..212f43b 100644
--- a/drivers/net/ethernet/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/octeon/octeon_mgmt.c
@@ -9,6 +9,7 @@
 #include <linux/capability.h>
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index b89f3a6..48406ca 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -20,6 +20,7 @@
 
 #include "pch_gbe.h"
 #include "pch_gbe_api.h"
+#include <linux/module.h>
 
 #define DRV_VERSION     "1.00"
 const char pch_driver_version[] = DRV_VERSION;
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
index 5b5d90a..9cb5f91 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
@@ -19,6 +19,7 @@
  */
 
 #include "pch_gbe.h"
+#include <linux/module.h>	/* for __MODULE_STRING */
 
 #define OPTION_UNSET   -1
 #define OPTION_DISABLED 0
diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h
index 8731f79..b8478aa 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge.h
+++ b/drivers/net/ethernet/qlogic/qlge/qlge.h
@@ -58,10 +58,8 @@
 
 
 #define TX_DESC_PER_IOCB 8
-/* The maximum number of frags we handle is based
- * on PAGE_SIZE...
- */
-#if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13)	/* 4k & 8k pages */
+
+#if ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) > 0
 #define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2)
 #else /* all other page sizes */
 #define TX_DESC_PER_OAL 0
@@ -1353,7 +1351,7 @@
 	struct ob_mac_iocb_req *queue_entry;
 	u32 index;
 	struct oal oal;
-	struct map_list map[MAX_SKB_FRAGS + 1];
+	struct map_list map[MAX_SKB_FRAGS + 2];
 	int map_cnt;
 	struct tx_ring_desc *next;
 };
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 1fc01ca..4bf68cf 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -940,7 +940,7 @@
 	iowrite16(lp->mcr0, ioaddr + MCR0);
 
 	/* Fill the MAC hash tables with their values */
-	if (lp->mcr0 && MCR0_HASH_EN) {
+	if (lp->mcr0 & MCR0_HASH_EN) {
 		iowrite16(hash_table[0], ioaddr + MAR0);
 		iowrite16(hash_table[1], ioaddr + MAR1);
 		iowrite16(hash_table[2], ioaddr + MAR2);
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 84083ec..0578859 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -115,16 +115,4 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.
 
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
 endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index e48cfb6..71b1da3 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -6,4 +6,3 @@
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ATP) += atp.o
 obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 92b45f0..6f06aa1 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1292,7 +1292,7 @@
 		netif_carrier_off(dev);
 		netif_info(tp, ifdown, dev, "link down\n");
 		if (pm)
-			pm_schedule_suspend(&tp->pci_dev->dev, 100);
+			pm_schedule_suspend(&tp->pci_dev->dev, 5000);
 	}
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c
index adbda18..752d521 100644
--- a/drivers/net/ethernet/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
@@ -15,6 +15,7 @@
 #include <linux/tcp.h>
 #include <linux/udp.h>
 #include <linux/prefetch.h>
+#include <linux/moduleparam.h>
 #include <net/ip.h>
 #include <net/checksum.h>
 #include "net_driver.h"
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
new file mode 100644
index 0000000..ae1ce17
--- /dev/null
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -0,0 +1,33 @@
+#
+# Silan device configuration
+#
+
+config NET_VENDOR_SILAN
+	bool "Silan devices"
+	default y
+	depends on PCI && EXPERIMENTAL
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Silan devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SILAN
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
+
+endif # NET_VENDOR_SILAN
diff --git a/drivers/net/ethernet/silan/Makefile b/drivers/net/ethernet/silan/Makefile
new file mode 100644
index 0000000..4ad3523
--- /dev/null
+++ b/drivers/net/ethernet/silan/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Silan network device drivers.
+#
+
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/realtek/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
similarity index 100%
rename from drivers/net/ethernet/realtek/sc92031.c
rename to drivers/net/ethernet/silan/sc92031.c
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index d2be42a..8843071 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1937,6 +1937,7 @@
 {
 	struct smsc911x_data *pdata = netdev_priv(dev);
 	unsigned int byte_test;
+	unsigned int to = 100;
 
 	SMSC_TRACE(pdata, probe, "Driver Parameters:");
 	SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
@@ -1952,6 +1953,17 @@
 		return -ENODEV;
 	}
 
+	/*
+	 * poll the READY bit in PMT_CTRL. Any other access to the device is
+	 * forbidden while this bit isn't set. Try for 100ms
+	 */
+	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+		udelay(1000);
+	if (to == 0) {
+		pr_err("Device not READY in 100ms aborting\n");
+		return -ENODEV;
+	}
+
 	/* Check byte ordering */
 	byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
 	SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index 4f15680..edb24b0 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -28,6 +28,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/crc32.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 #include "smsc9420.h"
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index ac6f190..22745d7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -29,15 +29,6 @@
 	  By default, the DMA arbitration scheme is based on Round-robin
 	  (rx:tx priority is 1:1).
 
-config STMMAC_DUAL_MAC
-	bool "STMMAC: dual mac support (EXPERIMENTAL)"
-	default n
-        depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
-	---help---
-	  Some ST SoCs (for example the stx7141 and stx7200c2) have two
-	  Ethernet Controllers. This option turns on the second Ethernet
-	  device on this kind of platforms.
-
 config STMMAC_TIMER
 	bool "STMMAC Timer optimisation"
 	default n
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index da66ac5..4d5402a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -39,10 +39,11 @@
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 15000;
+	limit = 10;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
+		mdelay(10);
 	}
 	if (limit < 0)
 		return -EBUSY;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 627f656..bc17fd0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -41,10 +41,11 @@
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 15000;
+	limit = 10;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
+		mdelay(10);
 	}
 	if (limit < 0)
 		return -EBUSY;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9bafa6c..a140a8f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -72,7 +72,6 @@
 	spinlock_t lock;
 	spinlock_t tx_lock;
 	int wolopts;
-	int wolenabled;
 	int wol_irq;
 #ifdef CONFIG_STMMAC_TIMER
 	struct stmmac_timer *tm;
@@ -80,6 +79,7 @@
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
+	int hw_cap_support;
 };
 
 extern int stmmac_mdio_unregister(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index e8eff09..0395f9e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -430,6 +430,12 @@
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 support = WAKE_MAGIC | WAKE_UCAST;
 
+	/* By default almost all GMAC devices support the WoL via
+	 * magic frame but we can disable it if the HW capability
+	 * register shows no support for pmt_magic_frame. */
+	if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame))
+		wol->wolopts &= ~WAKE_MAGIC;
+
 	if (!device_can_wakeup(priv->device))
 		return -EINVAL;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 20546bb..72cd190 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -321,12 +321,10 @@
 	}
 
 	/* Stop Advertising 1000BASE Capability if interface is not GMII */
-	if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) ||
-	    (interface == PHY_INTERFACE_MODE_RMII))) {
-		phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
-				      SUPPORTED_Asym_Pause);
-		phydev->advertising = phydev->supported;
-	}
+	if ((interface == PHY_INTERFACE_MODE_MII) ||
+	    (interface == PHY_INTERFACE_MODE_RMII))
+		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+					 SUPPORTED_1000baseT_Full);
 
 	/*
 	 * Broken HW is sometimes missing the pull-up resistor on the
@@ -783,10 +781,15 @@
 	unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
 			    MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
 
-	/* Do not manage MMC IRQ (FIXME) */
+	/* Mask MMC irq, counters are managed in SW and registers
+	 * are cleared on each READ eventually. */
 	dwmac_mmc_intr_all_mask(priv->ioaddr);
-	dwmac_mmc_ctrl(priv->ioaddr, mode);
-	memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
+
+	if (priv->dma_cap.rmon) {
+		dwmac_mmc_ctrl(priv->ioaddr, mode);
+		memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
+	} else
+		pr_info(" No MAC Management Counters available");
 }
 
 static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
@@ -807,8 +810,29 @@
 	return 0;
 }
 
-/* New GMAC chips support a new register to indicate the
- * presence of the optional feature/functions.
+/**
+ * stmmac_selec_desc_mode
+ * @dev : device pointer
+ * Description: select the Enhanced/Alternate or Normal descriptors */
+static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
+{
+	if (priv->plat->enh_desc) {
+		pr_info(" Enhanced/Alternate descriptors\n");
+		priv->hw->desc = &enh_desc_ops;
+	} else {
+		pr_info(" Normal descriptors\n");
+		priv->hw->desc = &ndesc_ops;
+	}
+}
+
+/**
+ * stmmac_get_hw_features
+ * @priv : private device pointer
+ * Description:
+ *  new GMAC chip generations have a new register to indicate the
+ *  presence of the optional feature/functions.
+ *  This can be also used to override the value passed through the
+ *  platform and necessary for old MAC10/100 and GMAC chips.
  */
 static int stmmac_get_hw_features(struct stmmac_priv *priv)
 {
@@ -829,7 +853,7 @@
 			(hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
 		priv->dma_cap.pmt_magic_frame =
 			(hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
-		/*MMC*/
+		/* MMC */
 		priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
 		/* IEEE 1588-2002*/
 		priv->dma_cap.time_stamp =
@@ -857,8 +881,7 @@
 		priv->dma_cap.enh_desc =
 			(hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
 
-	} else
-		pr_debug("\tNo HW DMA feature register supported");
+	}
 
 	return hw_cap;
 }
@@ -913,6 +936,44 @@
 		goto open_error;
 	}
 
+	stmmac_get_synopsys_id(priv);
+
+	priv->hw_cap_support = stmmac_get_hw_features(priv);
+
+	if (priv->hw_cap_support) {
+		pr_info(" Support DMA HW capability register");
+
+		/* We can override some gmac/dma configuration fields: e.g.
+		 * enh_desc, tx_coe (e.g. that are passed through the
+		 * platform) with the values from the HW capability
+		 * register (if supported).
+		 */
+		priv->plat->enh_desc = priv->dma_cap.enh_desc;
+		priv->plat->tx_coe = priv->dma_cap.tx_coe;
+		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+
+		/* By default disable wol on magic frame if not supported */
+		if (!priv->dma_cap.pmt_magic_frame)
+			priv->wolopts &= ~WAKE_MAGIC;
+
+	} else
+		pr_info(" No HW DMA feature register supported");
+
+	/* Select the enhnaced/normal descriptor structures */
+	stmmac_selec_desc_mode(priv);
+
+	/* PMT module is not integrated in all the MAC devices. */
+	if (priv->plat->pmt) {
+		pr_info(" Remote wake-up capable\n");
+		device_set_wakeup_capable(priv->device, 1);
+	}
+
+	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+	if (priv->rx_coe)
+		pr_info(" Checksum Offload Engine supported\n");
+	if (priv->plat->tx_coe)
+		pr_info(" Checksum insertion supported\n");
+
 	/* Create and initialize the TX/RX descriptors chains. */
 	priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
 	priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -935,15 +996,6 @@
 	/* Initialize the MAC Core */
 	priv->hw->mac->core_init(priv->ioaddr);
 
-	stmmac_get_synopsys_id(priv);
-
-	stmmac_get_hw_features(priv);
-
-	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
-	if (priv->rx_coe)
-		pr_info("stmmac: Rx Checksum Offload Engine supported\n");
-	if (priv->plat->tx_coe)
-		pr_info("\tTX Checksum insertion supported\n");
 	netdev_update_features(dev);
 
 	/* Request the IRQ lines */
@@ -965,8 +1017,7 @@
 	memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
 	priv->xstats.threshold = tc;
 
-	if (priv->dma_cap.rmon)
-		stmmac_mmc_setup(priv);
+	stmmac_mmc_setup(priv);
 
 	/* Start the ball rolling... */
 	DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
@@ -1489,9 +1540,7 @@
 	if (!priv->phydev)
 		return -EINVAL;
 
-	spin_lock(&priv->lock);
 	ret = phy_mii_ioctl(priv->phydev, rq, cmd);
-	spin_unlock(&priv->lock);
 
 	return ret;
 }
@@ -1558,7 +1607,7 @@
 	struct net_device *dev = seq->private;
 	struct stmmac_priv *priv = netdev_priv(dev);
 
-	if (!stmmac_get_hw_features(priv)) {
+	if (!priv->hw_cap_support) {
 		seq_printf(seq, "DMA HW features not supported\n");
 		return 0;
 	}
@@ -1766,12 +1815,6 @@
 	if (!device)
 		return -ENOMEM;
 
-	if (priv->plat->enh_desc) {
-		device->desc = &enh_desc_ops;
-		pr_info("\tEnhanced descriptor structure\n");
-	} else
-		device->desc = &ndesc_ops;
-
 	priv->hw = device;
 	priv->hw->ring = &ring_mode_ops;
 
@@ -1845,11 +1888,6 @@
 
 	priv->ioaddr = addr;
 
-	/* PMT module is not integrated in all the MAC devices. */
-	if (plat_dat->pmt) {
-		pr_info("\tPMT module supported\n");
-		device_set_wakeup_capable(&pdev->dev, 1);
-	}
 	/*
 	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
 	 * The external wake up irq can be passed through the platform code
@@ -1862,7 +1900,6 @@
 	if (priv->wol_irq == -ENXIO)
 		priv->wol_irq = ndev->irq;
 
-
 	platform_set_drvdata(pdev, ndev);
 
 	/* Set the I/O base addr */
@@ -1875,7 +1912,7 @@
 			goto out_free_ndev;
 	}
 
-	/* MAC HW revice detection */
+	/* MAC HW device detection */
 	ret = stmmac_mac_device_setup(ndev);
 	if (ret < 0)
 		goto out_plat_exit;
@@ -1978,12 +2015,13 @@
 	if (!ndev || !netif_running(ndev))
 		return 0;
 
+	if (priv->phydev)
+		phy_stop(priv->phydev);
+
 	spin_lock(&priv->lock);
 
 	netif_device_detach(ndev);
 	netif_stop_queue(ndev);
-	if (priv->phydev)
-		phy_stop(priv->phydev);
 
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm->timer_stop();
@@ -2041,12 +2079,13 @@
 #endif
 	napi_enable(&priv->napi);
 
-	if (priv->phydev)
-		phy_start(priv->phydev);
-
 	netif_start_queue(ndev);
 
 	spin_unlock(&priv->lock);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index c517dac..cf14ab9 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2637,7 +2637,7 @@
 	sbus_dp = op->dev.parent->of_node;
 
 	/* We can match PCI devices too, do not accept those here. */
-	if (strcmp(sbus_dp->name, "sbus"))
+	if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi"))
 		return err;
 
 	if (is_qfe) {
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index ddb33cf..7bf1e20 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -1674,6 +1674,9 @@
 	int result;
 
 	pr_debug("%s: called\n", __func__);
+
+	udbg_shutdown_ps3gelic();
+
 	result = ps3_open_hv_device(dev);
 
 	if (result) {
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index d3fadfb..a93df6a 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -359,6 +359,12 @@
 	return port->priv;
 }
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_PS3GELIC
+extern void udbg_shutdown_ps3gelic(void);
+#else
+static inline void udbg_shutdown_ps3gelic(void) {}
+#endif
+
 extern int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask);
 /* shared netdev ops */
 extern void gelic_card_up(struct gelic_card *card);
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 4d1658e..2681b53 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -114,6 +114,7 @@
 		return;
 	temac_iow(lp, XTE_LSW0_OFFSET, value);
 	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+	temac_indirect_busywait(lp);
 }
 
 /**
@@ -203,6 +204,9 @@
 	struct temac_local *lp = netdev_priv(ndev);
 	int i;
 
+	/* Reset Local Link (DMA) */
+	lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+
 	for (i = 0; i < RX_BD_NUM; i++) {
 		if (!lp->rx_skb[i])
 			break;
@@ -716,8 +720,8 @@
 		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 		cur_p->phys = dma_map_single(ndev->dev.parent,
 					     skb_frag_address(frag),
-					     frag_size(frag), DMA_TO_DEVICE);
-		cur_p->len = frag_size(frag);
+					     skb_frag_size(frag), DMA_TO_DEVICE);
+		cur_p->len = skb_frag_size(frag);
 		cur_p->app0 = 0;
 		frag++;
 	}
@@ -860,6 +864,8 @@
 		phy_start(lp->phy_dev);
 	}
 
+	temac_device_reset(ndev);
+
 	rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
 	if (rc)
 		goto err_tx_irq;
@@ -867,7 +873,6 @@
 	if (rc)
 		goto err_rx_irq;
 
-	temac_device_reset(ndev);
 	return 0;
 
  err_rx_irq:
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index ec96d91..f45c85a 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -35,6 +35,7 @@
 #include <linux/platform_device.h>
 #include <linux/ptp_classify.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <mach/ixp46x_ts.h>
 #include <mach/npe.h>
 #include <mach/qmgr.h>
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
index 7393eb7..95eb34f 100644
--- a/drivers/net/hippi/Kconfig
+++ b/drivers/net/hippi/Kconfig
@@ -36,4 +36,4 @@
 	  kernel code or by user space programs. Say Y here only if you have
 	  the memory.
 
-endif /* HIPPI */
+endif # HIPPI
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index a40fab4..d423d18 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -314,7 +314,7 @@
 
 config AU1000_FIR
 	tristate "Alchemy Au1000 SIR/FIR"
-	depends on SOC_AU1000 && IRDA
+	depends on IRDA && MIPS_ALCHEMY
 
 config SMC_IRCC_FIR
 	tristate "SMSC IrCC (EXPERIMENTAL)"
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index a3ce3d4..7413497 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -192,6 +192,13 @@
 			 */
 			macvlan_broadcast(skb, port, src->dev,
 					  MACVLAN_MODE_VEPA);
+		else {
+			/* forward to original port. */
+			vlan = src;
+			ret = macvlan_broadcast_one(skb, vlan, eth, 0);
+			goto out;
+		}
+
 		return RX_HANDLER_PASS;
 	}
 
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index bb88e12..a702443 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig PHYLIB
-	bool "PHY Device support and infrastructure"
+	tristate "PHY Device support and infrastructure"
 	depends on !S390
 	depends on NETDEVICES
 	help
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index a4eae75..f414ffb 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -14,6 +14,7 @@
  *
  */
 #include <linux/phy.h>
+#include <linux/module.h>
 
 #define RTL821x_PHYSR		0x11
 #define RTL821x_PHYSR_DUPLEX	0x2000
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e81e22e..e6fed4d 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -36,7 +36,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/slab.h>
 
-#define DRIVER_VERSION "26-Sep-2011"
+#define DRIVER_VERSION "08-Nov-2011"
 #define DRIVER_NAME "asix"
 
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
@@ -163,7 +163,7 @@
 #define MARVELL_CTRL_TXDELAY	0x0002
 #define MARVELL_CTRL_RXDELAY	0x0080
 
-#define	PHY_MODE_RTL8211CL	0x0004
+#define	PHY_MODE_RTL8211CL	0x000C
 
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
@@ -652,9 +652,17 @@
 {
 	int phy_reg;
 	u32 phy_id;
+	int i;
 
-	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
-	if (phy_reg < 0)
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
 		return 0;
 
 	phy_id = (phy_reg & 0xffff) << 16;
@@ -1075,7 +1083,7 @@
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	int ret, embd_phy;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 buf[ETH_ALEN];
 	u32 phyid;
@@ -1100,16 +1108,36 @@
 	dev->mii.reg_num_mask = 0x1f;
 	dev->mii.phy_id = asix_get_phy_addr(dev);
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
-
 	dev->net->netdev_ops = &ax88772_netdev_ops;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
 
-	ret = ax88772_reset(dev);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+	/* Reset the PHY to normal operation mode */
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		dbg("Select PHY #1 failed: %d", ret);
+		return ret;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
 	if (ret < 0)
 		return ret;
 
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		return ret;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
 		/* hard_mtu  is still the default - the device does not support
@@ -1220,6 +1248,7 @@
 	__le16 eeprom;
 	u8 status;
 	int gpio0 = 0;
+	u32 phyid;
 
 	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
 	dbg("GPIO Status: 0x%04x", status);
@@ -1235,12 +1264,13 @@
 		data->ledmode = 0;
 		gpio0 = 1;
 	} else {
-		data->phymode = le16_to_cpu(eeprom) & 7;
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
 		data->ledmode = le16_to_cpu(eeprom) >> 8;
 		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
 	}
 	dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
 
+	/* Power up external GigaPHY through AX88178 GPIO pin */
 	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
 		asix_write_gpio(dev, 0x003c, 30);
@@ -1252,6 +1282,13 @@
 		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
 	}
 
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
 	asix_sw_reset(dev, 0);
 	msleep(150);
 
@@ -1396,7 +1433,6 @@
 {
 	int ret;
 	u8 buf[ETH_ALEN];
-	u32 phyid;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 
 	data->eeprom_len = AX88772_EEPROM_LEN;
@@ -1423,12 +1459,12 @@
 	dev->net->netdev_ops = &ax88178_netdev_ops;
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0);
+	msleep(150);
 
-	ret = ax88178_reset(dev);
-	if (ret < 0)
-		return ret;
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c924ea2..99ed6eb 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -567,7 +567,7 @@
 {
 	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long)&wwan_info,
+	.driver_info = 0,
 },
 
 /*
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index 1e72219..9c26c63 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -27,6 +27,7 @@
 #include <linux/if_ether.h>
 #include <linux/if_arp.h>
 #include <linux/inetdevice.h>
+#include <linux/module.h>
 
 /*
  * The device has a CDC ACM port for modem control (it claims to be
@@ -143,10 +144,11 @@
 	}
 
 	frame = (struct vl600_frame_hdr *) buf->data;
-	/* NOTE: Should check that frame->magic == 0x53544448?
-	 * Otherwise if we receive garbage at the beginning of the frame
-	 * we may end up allocating a huge buffer and saving all the
-	 * future incoming data into it.  */
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
 
 	if (buf->len < sizeof(*frame) ||
 			buf->len != le32_to_cpup(&frame->len)) {
@@ -295,6 +297,11 @@
 	 * overwrite the remaining fields.
 	 */
 	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
 	memset(&packet->dummy, 0, sizeof(packet->dummy));
 	packet->len = cpu_to_le32(orig_len);
 
@@ -307,21 +314,12 @@
 	if (skb->len < full_len) /* Pad */
 		skb_put(skb, full_len - skb->len);
 
-	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
-	 * Check if this is an IPv6 packet, and set the ethertype
-	 * to 0x800
-	 */
-	if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
-	}
-
 	return skb;
 }
 
 static const struct driver_info	vl600_info = {
 	.description	= "LG VL600 modem",
-	.flags		= FLAG_ETHER | FLAG_RX_ASSEMBLE,
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
 	.bind		= vl600_bind,
 	.unbind		= vl600_unbind,
 	.status		= usbnet_cdc_status,
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 22a7cf9..a5b9b12 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -51,6 +51,7 @@
 #define USB_VENDOR_ID_SMSC		(0x0424)
 #define USB_PRODUCT_ID_LAN7500		(0x7500)
 #define USB_PRODUCT_ID_LAN7505		(0x7505)
+#define RXW_PADDING			2
 
 #define check_warn(ret, fmt, args...) \
 	({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
@@ -1088,13 +1089,13 @@
 
 		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
 		le32_to_cpus(&rx_cmd_b);
-		skb_pull(skb, 4 + NET_IP_ALIGN);
+		skb_pull(skb, 4 + RXW_PADDING);
 
 		packet = skb->data;
 
 		/* get the packet length */
-		size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
-		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
 
 		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
 			netif_dbg(dev, rx_err, dev->net,
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 7d60821..fae0fbd 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1057,7 +1057,8 @@
 	unsigned long		flags;
 	int retval;
 
-	skb_tx_timestamp(skb);
+	if (skb)
+		skb_tx_timestamp(skb);
 
 	// some devices want funky USB-level framing, for
 	// win32 driver (usually) and/or hardware quirks
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 5b23767..ef883e9 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -17,6 +17,7 @@
 #include <net/dst.h>
 #include <net/xfrm.h>
 #include <linux/veth.h>
+#include <linux/module.h>
 
 #define DRV_NAME	"veth"
 #define DRV_VERSION	"1.0"
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index b771eba..d96bfb1 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -24,6 +24,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <net/ip6_checksum.h>
 
 #include "vmxnet3_int.h"
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 727d728..2fea02b 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -78,6 +78,8 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/wimax/i2400m.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 
 
 #define D_SUBMODULE control
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 9c70b5f..129ba36 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -26,6 +26,7 @@
 #include <linux/etherdevice.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include "i2400m.h"
 
 
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 85dadd5..7cbd7d2 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -158,6 +158,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/export.h>
 #include "i2400m.h"
 
 
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 2edd8fe..64a1106 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -76,6 +76,7 @@
 #include <linux/slab.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
+#include <linux/export.h>
 #include "i2400m.h"
 
 
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 2f94a87..37becfc 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -149,6 +149,8 @@
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
 #include <linux/workqueue.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 #include "i2400m.h"
 
 
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index be428ca..21a9edd 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -55,6 +55,7 @@
 #include <linux/mmc/sdio_func.h>
 #include "i2400m-sdio.h"
 #include <linux/wimax/i2400m.h>
+#include <linux/module.h>
 
 #define D_SUBMODULE main
 #include "sdio-debug-levels.h"
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 4b30ed1..4b9ecb2 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -245,6 +245,7 @@
  */
 #include <linux/netdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "i2400m.h"
 
 
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 9a644d0..2c1b8b6 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -67,6 +67,7 @@
 #include <linux/wimax/i2400m.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 
 #define D_SUBMODULE usb
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 3b752d9..f5ce562 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/crc32.h>
 #include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 
 #include "adm8211.h"
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index fce8c90..8c5ce8b 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -57,8 +57,9 @@
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  * THE POSSIBILITY OF SUCH DAMAGES.
  */
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 
-#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/list.h>
 #include "debug.h"
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index c1dff2c..dfa48eb 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
 #include <linux/etherdevice.h>
+#include <linux/module.h>
 #include "../ath.h"
 #include "ath5k.h"
 #include "debug.h"
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 3aff36b..f517eb8 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -14,6 +14,8 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/moduleparam.h>
+
 #include "core.h"
 #include "cfg80211.h"
 #include "debug.h"
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index ba3f23d..7879b53 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -19,6 +19,7 @@
 #include <linux/circ_buf.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include "debug.h"
 #include "target.h"
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index f1dc311..066d4f8 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/module.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/host.h>
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 85a54cd..5e47ca6 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -19,6 +19,7 @@
 #include <linux/nl80211.h>
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
+#include <linux/module.h>
 #include "ath9k.h"
 
 static const struct platform_device_id ath9k_platform_id_table[] = {
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2776c3c..a639b94 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include "hw.h"
 #include "hw-ops.h"
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index e0ab065..88279e3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -868,10 +868,6 @@
 	/* Do PA Calibration */
 	ar9002_hw_pa_cal(ah, true);
 
-	/* Do NF Calibration after DC offset and other calibrations */
-	ath9k_hw_loadnf(ah, chan);
-	ath9k_hw_start_nfcal(ah, true);
-
 	if (ah->caldata)
 		ah->caldata->nfcal_pending = true;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index 626d547..11f192a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/moduleparam.h>
 #include "hw.h"
 #include "ar5008_initvals.h"
 #include "ar9001_initvals.h"
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index f7d8e51..b592016 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -15,6 +15,7 @@
  */
 
 #include "hw.h"
+#include <linux/export.h>
 
 #define AR_BufLen           0x00000fff
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 16851cb..12a730d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -908,12 +908,15 @@
 	int i;
 	bool restore;
 
-	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT) || !ah->caldata)
+	if (!ah->caldata)
 		return false;
 
 	hist = &ah->caldata->rtt_hist;
+	if (!hist->num_readings)
+		return false;
+
 	ar9003_hw_rtt_enable(ah);
-	ar9003_hw_rtt_set_mask(ah, 0x10);
+	ar9003_hw_rtt_set_mask(ah, 0x00);
 	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
 		if (!(ah->rxchainmask & (1 << i)))
 			continue;
@@ -1070,6 +1073,7 @@
 		if (is_reusable && (hist->num_readings < RTT_HIST_MAX)) {
 			u32 *table;
 
+			hist->num_readings++;
 			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
 				if (!(ah->rxchainmask & (1 << i)))
 					continue;
@@ -1081,9 +1085,6 @@
 		ar9003_hw_rtt_disable(ah);
 	}
 
-	ath9k_hw_loadnf(ah, chan);
-	ath9k_hw_start_nfcal(ah, true);
-
 	/* Initialize list pointers */
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 	ah->supp_cals = IQ_MISMATCH_CAL;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index b363cc0..ccde784 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -13,6 +13,7 @@
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#include <linux/export.h>
 #include "hw.h"
 #include "ar9003_mac.h"
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 0c462c9..a4450cb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "hw.h"
 #include "ar9003_phy.h"
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index fe96997..2330e7e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "hw.h"
 #include "ar9003_phy.h"
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 2f4023e..4114fe7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -572,14 +572,14 @@
 
 #define AR_PHY_TXGAIN_TABLE      (AR_SM_BASE + 0x300)
 
-#define AR_PHY_TX_IQCAL_CONTROL_0   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c4 : 0x444)
-#define AR_PHY_TX_IQCAL_CONTROL_1   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c8 : 0x448)
-#define AR_PHY_TX_IQCAL_START       (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c4 : 0x440)
-#define AR_PHY_TX_IQCAL_STATUS_B0   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3f0 : 0x48c)
+#define AR_PHY_TX_IQCAL_CONTROL_0   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c4 : 0x444))
+#define AR_PHY_TX_IQCAL_CONTROL_1   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c8 : 0x448))
+#define AR_PHY_TX_IQCAL_START       (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c4 : 0x440))
+#define AR_PHY_TX_IQCAL_STATUS_B0   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3f0 : 0x48c))
 #define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i)    (AR_SM_BASE + \
 					     (AR_SREV_9485(ah) ? \
 					      0x3d0 : 0x450) + ((_i) << 2))
@@ -651,7 +651,7 @@
 #define AR_SWITCH_TABLE_ALL_S (0)
 
 #define AR_PHY_65NM_CH0_THERM       (AR_SREV_9300(ah) ? 0x16290 :\
-					(AR_SREV_9485(ah) ? 0x1628c : 0x16294))
+					(AR_SREV_9462(ah) ? 0x16294 : 0x1628c))
 
 #define AR_PHY_65NM_CH0_THERM_LOCAL   0x80000000
 #define AR_PHY_65NM_CH0_THERM_LOCAL_S 31
@@ -668,12 +668,12 @@
 #define AR_PHY_65NM_CH2_RXTX2       0x16904
 
 #define AR_CH0_TOP2		(AR_SREV_9300(ah) ? 0x1628c : \
-					(AR_SREV_9485(ah) ? 0x16284 : 0x16290))
+					(AR_SREV_9462(ah) ? 0x16290 : 0x16284))
 #define AR_CH0_TOP2_XPABIASLVL		0xf000
 #define AR_CH0_TOP2_XPABIASLVL_S	12
 
 #define AR_CH0_XTAL		(AR_SREV_9300(ah) ? 0x16294 : \
-					(AR_SREV_9485(ah) ? 0x16290 : 0x16298))
+					(AR_SREV_9462(ah) ? 0x16298 : 0x16290))
 #define AR_CH0_XTAL_CAPINDAC	0x7f000000
 #define AR_CH0_XTAL_CAPINDAC_S	24
 #define AR_CH0_XTAL_CAPOUTDAC	0x00fe0000
@@ -908,8 +908,8 @@
 #define AR_PHY_TPC_5_B1         (AR_SM1_BASE + 0x208)
 #define AR_PHY_TPC_6_B1         (AR_SM1_BASE + 0x20c)
 #define AR_PHY_TPC_11_B1        (AR_SM1_BASE + 0x220)
-#define AR_PHY_PDADC_TAB_1	(AR_SM1_BASE + (AR_SREV_AR9300(ah) ? \
-					0x240 : 0x280))
+#define AR_PHY_PDADC_TAB_1	(AR_SM1_BASE + (AR_SREV_AR9462(ah) ? \
+					0x280 : 0x240))
 #define AR_PHY_TPC_19_B1	(AR_SM1_BASE + 0x240)
 #define AR_PHY_TPC_19_B1_ALPHA_THERM		0xff
 #define AR_PHY_TPC_19_B1_ALPHA_THERM_S		0
@@ -931,10 +931,10 @@
 #define AR_PHY_AIC_SRAM_ADDR_B1	(AR_SM1_BASE + 0x5f0)
 #define AR_PHY_AIC_SRAM_DATA_B1	(AR_SM1_BASE + 0x5f4)
 
-#define AR_PHY_RTT_TABLE_SW_INTF_B(i)	(0x384 + (i) ? \
-					AR_SM1_BASE : AR_SM_BASE)
-#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i)	(0x388 + (i) ? \
-					AR_SM1_BASE : AR_SM_BASE)
+#define AR_PHY_RTT_TABLE_SW_INTF_B(i)	(0x384 + ((i) ? \
+					AR_SM1_BASE : AR_SM_BASE))
+#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i)	(0x388 + ((i) ? \
+					AR_SM1_BASE : AR_SM_BASE))
 /*
  * Channel 2 Register Map
  */
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 611ea6c..d16d029 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -521,7 +521,7 @@
 	{0x000160ac, 0x24611800},
 	{0x000160b0, 0x03284f3e},
 	{0x0001610c, 0x00170000},
-	{0x00016140, 0x10804008},
+	{0x00016140, 0x50804008},
 };
 
 static const u32 ar9485_1_1_mac_postamble[][5] = {
@@ -603,7 +603,7 @@
 
 static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
 	/* Addr        allmodes */
-	{0x00018c00, 0x10052e5e},
+	{0x00018c00, 0x18052e5e},
 	{0x00018c04, 0x000801d8},
 	{0x00018c08, 0x0000080c},
 };
@@ -776,7 +776,7 @@
 
 static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = {
 	/* Addr        allmodes */
-	{0x00018c00, 0x10013e5e},
+	{0x00018c00, 0x18013e5e},
 	{0x00018c04, 0x000801d8},
 	{0x00018c08, 0x0000080c},
 };
@@ -882,7 +882,7 @@
 
 static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
 	/* Addr        allmodes  */
-	{0x00018c00, 0x10012e5e},
+	{0x00018c00, 0x18012e5e},
 	{0x00018c04, 0x000801d8},
 	{0x00018c08, 0x0000080c},
 };
@@ -1021,7 +1021,7 @@
 
 static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = {
 	/* Addr        allmodes */
-	{0x00018c00, 0x10053e5e},
+	{0x00018c00, 0x18053e5e},
 	{0x00018c04, 0x000801d8},
 	{0x00018c08, 0x0000080c},
 };
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 6635c37..0122639 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "hw.h"
 
 enum ath_bt_mode {
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index ebaf304..9953881 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -16,6 +16,7 @@
 
 #include "hw.h"
 #include "hw-ops.h"
+#include <linux/export.h>
 
 /* Common calibration code */
 
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 327aa28..2741203 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -16,6 +16,7 @@
 
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include "ath9k.h"
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f16d203..8873c6e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,6 +16,7 @@
 
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 
 #include "hw.h"
@@ -1724,6 +1725,9 @@
 	if (!ath9k_hw_init_cal(ah, chan))
 		return -EIO;
 
+	ath9k_hw_loadnf(ah, chan);
+	ath9k_hw_start_nfcal(ah, true);
+
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	ath9k_hw_restore_chainmask(ah);
@@ -1823,7 +1827,8 @@
 	}
 
 	/* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */
-	REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE);
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE);
 }
 
 /*
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index af1b325..d4c909f 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -17,6 +17,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/ath9k_platform.h>
+#include <linux/module.h>
 
 #include "ath9k.h"
 
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 6a8fdf3..ecdb6fd 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -16,6 +16,7 @@
 
 #include "hw.h"
 #include "hw-ops.h"
+#include <linux/export.h>
 
 static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
 					struct ath9k_tx_queue_info *qi)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index edb0b4b..2dcdf63 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
 #include <linux/ath9k_platform.h>
+#include <linux/module.h>
 #include "ath9k.h"
 
 static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 8448281..888abc2 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "ath9k.h"
 
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index f4cae1c..cba9d04 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/firmware.h>
 #include <linux/crc32.h>
+#include <linux/module.h>
 #include "carl9170.h"
 #include "fwcmd.h"
 #include "version.h"
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index d209469..59472e1 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -296,7 +296,8 @@
 			super = (void *)skb->data;
 			txinfo->status.ampdu_len = super->s.rix;
 			txinfo->status.ampdu_ack_len = super->s.cnt;
-		} else if (txinfo->flags & IEEE80211_TX_STAT_ACK) {
+		} else if ((txinfo->flags & IEEE80211_TX_STAT_ACK) &&
+			   !(txinfo->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)) {
 			/*
 			 * drop redundant tx_status reports:
 			 *
@@ -308,15 +309,17 @@
 			 *
 			 * 3. minstrel_ht is picky, it only accepts
 			 *    reports of frames with the TX_STATUS_AMPDU flag.
+			 *
+			 * 4. mac80211 is not particularly interested in
+			 *    feedback either [CTL_REQ_TX_STATUS not set]
 			 */
 
 			dev_kfree_skb_any(skb);
 			return;
 		} else {
 			/*
-			 * Frame has failed, but we want to keep it in
-			 * case it was lost due to a power-state
-			 * transition.
+			 * Either the frame transmission has failed or
+			 * mac80211 requested tx status.
 			 */
 		}
 	}
diff --git a/drivers/net/wireless/ath/debug.c b/drivers/net/wireless/ath/debug.c
index 5367b10..508eccf 100644
--- a/drivers/net/wireless/ath/debug.c
+++ b/drivers/net/wireless/ath/debug.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include "ath.h"
 
 const char *ath_opmode_to_string(enum nl80211_iftype opmode)
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
index 3f508e5..19befb3 100644
--- a/drivers/net/wireless/ath/hw.c
+++ b/drivers/net/wireless/ath/hw.c
@@ -14,6 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include "ath.h"
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 17b0efd..4cf7c5e 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -15,6 +15,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/export.h>
 #include <asm/unaligned.h>
 #include <net/mac80211.h>
 
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 028310f..65ecb5b 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include "regd.h"
@@ -253,6 +254,8 @@
 	int r;
 
 	sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+	if (!sband)
+		return;
 
 	/*
 	 * If no country IE has been received always enable active scan
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7cf4125..5634d9a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -34,7 +34,7 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
 #include <linux/firmware.h>
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 12b6b40..714cad6 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -25,6 +25,7 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index c73e860..5f77cbe 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -175,6 +175,7 @@
 	}
 }
 
+/* TODO: verify if needed for SSLPN or LCN  */
 static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate)
 {
 	const struct b43_phy *phy = &dev->phy;
@@ -256,6 +257,9 @@
 	unsigned int plcp_fragment_len;
 	u32 mac_ctl = 0;
 	u16 phy_ctl = 0;
+	bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP ||
+			      phy->type == B43_PHYTYPE_N ||
+			      phy->type == B43_PHYTYPE_HT);
 	u8 extra_ft = 0;
 	struct ieee80211_rate *txrate;
 	struct ieee80211_tx_rate *rates;
@@ -531,7 +535,7 @@
 			extra_ft |= B43_TXH_EFT_RTSFB_CCK;
 
 		if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS &&
-		    phy->type == B43_PHYTYPE_N) {
+		    fill_phy_ctl1) {
 			txhdr->phy_ctl1_rts = cpu_to_le16(
 				b43_generate_tx_phy_ctl1(dev, rts_rate));
 			txhdr->phy_ctl1_rts_fb = cpu_to_le16(
@@ -552,7 +556,7 @@
 		break;
 	}
 
-	if (phy->type == B43_PHYTYPE_N) {
+	if (fill_phy_ctl1) {
 		txhdr->phy_ctl1 =
 			cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate));
 		txhdr->phy_ctl1_fb =
@@ -736,7 +740,14 @@
 
 	/* Link quality statistics */
 	switch (chanstat & B43_RX_CHAN_PHYTYPE) {
+	case B43_PHYTYPE_HT:
+		/* TODO: is max the right choice? */
+		status.signal = max_t(__s8,
+			max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1),
+			rxhdr->phy_ht_power2);
+		break;
 	case B43_PHYTYPE_N:
+		/* Broadcom has code for min and avg, but always uses max */
 		if (rxhdr->power0 == 16 || rxhdr->power0 == 32)
 			status.signal = max(rxhdr->power1, rxhdr->power2);
 		else
@@ -827,7 +838,6 @@
 #endif
 	return;
 drop:
-	b43dbg(dev->wl, "RX: Packet dropped\n");
 	dev_kfree_skb_any(skb);
 }
 
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 16c514d..98d9074 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -249,6 +249,12 @@
 		} __packed;
 	} __packed;
 	union {
+		/* HT-PHY */
+		struct {
+			PAD_BYTES(1);
+			__s8 phy_ht_power0;
+		} __packed;
+
 		/* RSSI for N-PHYs */
 		struct {
 			__s8 power2;
@@ -257,7 +263,15 @@
 
 		__le16 phy_status2;	/* PHY RX Status 2 */
 	} __packed;
-	__le16 phy_status3;	/* PHY RX Status 3 */
+	union {
+		/* HT-PHY */
+		struct {
+			__s8 phy_ht_power1;
+			__s8 phy_ht_power2;
+		} __packed;
+
+		__le16 phy_status3;	/* PHY RX Status 3 */
+	} __packed;
 	union {
 		/* Tested with 598.314, 644.1001 and 666.2 */
 		struct {
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a3b72cd..20f0243 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -31,7 +31,7 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
 #include <linux/firmware.h>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index bff9dcd..89ff94d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -17,6 +17,7 @@
 
 #include <linux/types.h>
 #include <linux/netdevice.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/sched.h>
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
index b56a302..6ebec8f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
@@ -358,13 +358,14 @@
 
 static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags)
 {
-	uint dmactrlflags = di->dma.dmactrlflags;
+	uint dmactrlflags;
 
 	if (di == NULL) {
-		DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name));
+		DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n"));
 		return 0;
 	}
 
+	dmactrlflags = di->dma.dmactrlflags;
 	dmactrlflags &= ~mask;
 	dmactrlflags |= flags;
 
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index ac8d02b..0d8a9cd 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -21,6 +21,7 @@
 #include <linux/sched.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 #include <defs.h>
 #include "nicpci.h"
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index e0b3e8d..df7050a 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -1,5 +1,6 @@
 #include <linux/etherdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/lib80211.h>
 #include <linux/if_arp.h>
 
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index c34a3b7..344a981 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -1,4 +1,5 @@
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "hostap_80211.h"
 #include "hostap_common.h"
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 3d05dc1..e1f4102 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -21,6 +21,8 @@
 #include <linux/random.h>
 #include <linux/if_arp.h>
 #include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 
 #include "hostap_wlan.h"
 #include "hostap.h"
diff --git a/drivers/net/wireless/hostap/hostap_info.c b/drivers/net/wireless/hostap/hostap_info.c
index d737091..47932b2 100644
--- a/drivers/net/wireless/hostap/hostap_info.c
+++ b/drivers/net/wireless/hostap/hostap_info.c
@@ -3,6 +3,7 @@
 #include <linux/if_arp.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "hostap_wlan.h"
 #include "hostap.h"
 #include "hostap_ap.h"
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 12de464..045a936 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -5,6 +5,7 @@
 #include <linux/sched.h>
 #include <linux/ethtool.h>
 #include <linux/if_arp.h>
+#include <linux/module.h>
 #include <net/lib80211.h>
 
 #include "hostap_wlan.h"
diff --git a/drivers/net/wireless/hostap/hostap_proc.c b/drivers/net/wireless/hostap/hostap_proc.c
index 005ff25..75ef8f0 100644
--- a/drivers/net/wireless/hostap/hostap_proc.c
+++ b/drivers/net/wireless/hostap/hostap_proc.c
@@ -2,6 +2,7 @@
 
 #include <linux/types.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 #include <net/lib80211.h>
 
 #include "hostap_wlan.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-debugfs.c b/drivers/net/wireless/iwlegacy/iwl-debugfs.c
index 996996a..1407dca 100644
--- a/drivers/net/wireless/iwlegacy/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-debugfs.c
@@ -26,6 +26,7 @@
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *****************************************************************************/
 #include <linux/ieee80211.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 
 
diff --git a/drivers/net/wireless/iwlegacy/iwl-rx.c b/drivers/net/wireless/iwlegacy/iwl-rx.c
index 9b5d0ab..f4d21ec 100644
--- a/drivers/net/wireless/iwlegacy/iwl-rx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-rx.c
@@ -29,6 +29,7 @@
 
 #include <linux/etherdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include <asm/unaligned.h>
 #include "iwl-eeprom.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
index a6b5222..521b73b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ b/drivers/net/wireless/iwlegacy/iwl-scan.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c
index 66f0fb2..f10df3e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-sta.c
@@ -31,6 +31,7 @@
 #include <linux/etherdevice.h>
 #include <linux/sched.h>
 #include <linux/lockdep.h>
+#include <linux/export.h>
 
 #include "iwl-dev.h"
 #include "iwl-core.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
index ef9e268..c0dfb1a 100644
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-tx.c
@@ -30,6 +30,7 @@
 #include <linux/etherdevice.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "iwl-eeprom.h"
 #include "iwl-dev.h"
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index b247a56..001fdf1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1755,16 +1755,6 @@
 {
 	if (iwl_trans_check_stuck_queue(trans(priv), txq)) {
 		int ret;
-		if (txq == priv->shrd->cmd_queue) {
-			/*
-			 * validate command queue still working
-			 * by sending "ECHO" command
-			 */
-			if (!iwl_cmd_echo_test(priv))
-				return 0;
-			else
-				IWL_DEBUG_HC(priv, "echo testing fail\n");
-		}
 		ret = iwl_force_reset(priv, IWL_FW_RESET, false);
 		return (ret == -EAGAIN) ? 0 : 1;
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 3b6cc66..1800029 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -60,6 +60,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *****************************************************************************/
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
 
@@ -445,10 +446,9 @@
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
 	err = pci_enable_msi(pdev);
-	if (err) {
-		dev_printk(KERN_ERR, &pdev->dev, "pci_enable_msi failed");
-		goto out_iounmap;
-	}
+	if (err)
+		dev_printk(KERN_ERR, &pdev->dev,
+			"pci_enable_msi failed(0X%x)", err);
 
 	/* TODO: Move this away, not needed if not MSI */
 	/* enable rfkill interrupt: hw bug w/a */
@@ -469,7 +469,6 @@
 
 out_disable_msi:
 	pci_disable_msi(pdev);
-out_iounmap:
 	pci_iounmap(pdev, pci_bus->hw_base);
 out_pci_release_regions:
 	pci_set_drvdata(pdev, NULL);
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 8e8c75c..ce91898 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -407,6 +407,7 @@
 	struct iwl_queue *q = &txq->q;
 	enum dma_data_direction dma_dir;
 	unsigned long flags;
+	spinlock_t *lock;
 
 	if (!q->n_bd)
 		return;
@@ -414,19 +415,22 @@
 	/* In the command queue, all the TBs are mapped as BIDI
 	 * so unmap them as such.
 	 */
-	if (txq_id == trans->shrd->cmd_queue)
+	if (txq_id == trans->shrd->cmd_queue) {
 		dma_dir = DMA_BIDIRECTIONAL;
-	else
+		lock = &trans->hcmd_lock;
+	} else {
 		dma_dir = DMA_TO_DEVICE;
+		lock = &trans->shrd->sta_lock;
+	}
 
-	spin_lock_irqsave(&trans->shrd->sta_lock, flags);
+	spin_lock_irqsave(lock, flags);
 	while (q->write_ptr != q->read_ptr) {
 		/* The read_ptr needs to bound by q->n_window */
 		iwlagn_txq_free_tfd(trans, txq, get_cmd_index(q, q->read_ptr),
 				    dma_dir);
 		q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
 	}
-	spin_unlock_irqrestore(&trans->shrd->sta_lock, flags);
+	spin_unlock_irqrestore(lock, flags);
 }
 
 /**
@@ -986,29 +990,16 @@
 	return 0;
 }
 
-static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans)
+static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 {
 	unsigned long flags;
-	struct iwl_trans_pcie *trans_pcie =
-		IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
+	/* tell the device to stop sending interrupts */
 	spin_lock_irqsave(&trans->shrd->lock, flags);
 	iwl_disable_interrupts(trans);
 	spin_unlock_irqrestore(&trans->shrd->lock, flags);
 
-	/* wait to make sure we flush pending tasklet*/
-	synchronize_irq(bus(trans)->irq);
-	tasklet_kill(&trans_pcie->irq_tasklet);
-}
-
-static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
-{
-	/* stop and reset the on-board processor */
-	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	iwl_trans_pcie_disable_sync_irq(trans);
-
 	/* device going down, Stop using ICT table */
 	iwl_disable_ict(trans);
 
@@ -1035,6 +1026,20 @@
 
 	/* Stop the device, and put it in low power state */
 	iwl_apm_stop(priv(trans));
+
+	/* Upon stop, the APM issues an interrupt if HW RF kill is set.
+	 * Clean again the interrupt here
+	 */
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	iwl_disable_interrupts(trans);
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+	/* wait to make sure we flush pending tasklet*/
+	synchronize_irq(bus(trans)->irq);
+	tasklet_kill(&trans_pcie->irq_tasklet);
+
+	/* stop and reset the on-board processor */
+	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 }
 
 static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 50dee6a..bd75078 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -42,6 +42,7 @@
 #include <linux/ieee80211.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/moduleparam.h>
 
 #include "iwm.h"
 #include "bus.h"
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
index 0a0cc96..87eef57 100644
--- a/drivers/net/wireless/iwmc3200wifi/debugfs.c
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -25,6 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/bitops.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 
 #include "iwm.h"
 #include "bus.h"
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index 3620027..98a179f 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -42,6 +42,7 @@
 #include <linux/ieee80211.h>
 #include <linux/wireless.h>
 #include <linux/slab.h>
+#include <linux/moduleparam.h>
 
 #include "iwm.h"
 #include "debug.h"
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index 56383e7..764b40d 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -63,6 +63,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/netdevice.h>
 #include <linux/debugfs.h>
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index ff63782..a7f1ab2 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -634,7 +634,7 @@
 			if (channel &&
 			    !(channel->flags & IEEE80211_CHAN_DISABLED))
 				cfg80211_inform_bss(wiphy, channel,
-					bssid, le64_to_cpu(*(__le64 *)tsfdesc),
+					bssid, get_unaligned_le64(tsfdesc),
 					capa, intvl, ie, ielen,
 					LBS_SCAN_RSSI_TO_MBM(rssi),
 					GFP_KERNEL);
@@ -728,15 +728,9 @@
 		le16_to_cpu(scan_cmd->hdr.size),
 		lbs_ret_scan, 0);
 
-	if (priv->scan_channel >= priv->scan_req->n_channels) {
+	if (priv->scan_channel >= priv->scan_req->n_channels)
 		/* Mark scan done */
-		if (priv->internal_scan)
-			kfree(priv->scan_req);
-		else
-			cfg80211_scan_done(priv->scan_req, false);
-
-		priv->scan_req = NULL;
-	}
+		lbs_scan_done(priv);
 
 	/* Restart network */
 	if (carrier)
@@ -774,6 +768,21 @@
 	lbs_deb_leave(LBS_DEB_CFG80211);
 }
 
+/*
+ * Clean up priv->scan_req.  Should be used to handle the allocation details.
+ */
+void lbs_scan_done(struct lbs_private *priv)
+{
+	WARN_ON(!priv->scan_req);
+
+	if (priv->internal_scan)
+		kfree(priv->scan_req);
+	else
+		cfg80211_scan_done(priv->scan_req, false);
+
+	priv->scan_req = NULL;
+}
+
 static int lbs_cfg_scan(struct wiphy *wiphy,
 	struct net_device *dev,
 	struct cfg80211_scan_request *request)
diff --git a/drivers/net/wireless/libertas/cfg.h b/drivers/net/wireless/libertas/cfg.h
index a02ee15..558168c 100644
--- a/drivers/net/wireless/libertas/cfg.h
+++ b/drivers/net/wireless/libertas/cfg.h
@@ -16,6 +16,7 @@
 void lbs_send_disconnect_notification(struct lbs_private *priv);
 void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event);
 
+void lbs_scan_done(struct lbs_private *priv);
 void lbs_scan_deinit(struct lbs_private *priv);
 int lbs_disconnect(struct lbs_private *priv, u16 reason);
 
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index e08ab1d..d798bcc 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -8,6 +8,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/if_arp.h>
+#include <linux/export.h>
 
 #include "decl.h"
 #include "cfg.h"
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 1af1827..d8d8f0d 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -5,6 +5,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "decl.h"
 #include "cmd.h"
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index c962e21..9804ebc 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -29,7 +29,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 622ae6d..728baa4 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -21,7 +21,7 @@
 
 #include <linux/hardirq.h>
 #include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
@@ -995,6 +995,7 @@
 		spin_unlock_irqrestore(&card->buffer_lock, flags);
 		break;
 	default:
+		kfree(packet);
 		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
 			   type);
 		err = -EINVAL;
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 8147f1e..db879c3 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -5,7 +5,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 #include <linux/slab.h>
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index b03779b..957681d 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -6,7 +6,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/hardirq.h>
@@ -255,10 +255,8 @@
 
 	lbs_update_mcast(priv);
 	cancel_delayed_work_sync(&priv->scan_work);
-	if (priv->scan_req) {
-		cfg80211_scan_done(priv->scan_req, false);
-		priv->scan_req = NULL;
-	}
+	if (priv->scan_req)
+		lbs_scan_done(priv);
 
 	netif_carrier_off(priv->dev);
 
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 62e10ee..c7366b0 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -8,6 +8,7 @@
 #include <linux/hardirq.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 
 #include "defs.h"
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 8f12752..c025f9c 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -5,6 +5,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/sched.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 
 #include "host.h"
diff --git a/drivers/net/wireless/libertas_tf/cmd.c b/drivers/net/wireless/libertas_tf/cmd.c
index 13557fe..909ac36 100644
--- a/drivers/net/wireless/libertas_tf/cmd.c
+++ b/drivers/net/wireless/libertas_tf/cmd.c
@@ -11,6 +11,7 @@
 
 #include <linux/hardirq.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "libertas_tf.h"
 
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index ba7d965..68202e6 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -15,7 +15,7 @@
 #include "if_usb.h"
 
 #include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 #include <linux/slab.h>
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index acc461a..ceb51b6 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 
 #include <linux/etherdevice.h>
+#include <linux/module.h>
 #include "libertas_tf.h"
 
 #define DRIVER_RELEASE_VERSION "004.p0"
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 68455a2..523ad55 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -26,6 +26,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/etherdevice.h>
 #include <linux/debugfs.h>
+#include <linux/module.h>
 #include <net/genetlink.h>
 #include "mac80211_hwsim.h"
 
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index dae8dbb..8d3ab37 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -819,8 +819,10 @@
 			wildcard_ssid_tlv->header.len = cpu_to_le16(
 				(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
 							 max_ssid_length)));
-			wildcard_ssid_tlv->max_ssid_length =
-				user_scan_in->ssid_list[ssid_idx].max_len;
+
+			/* max_ssid_length = 0 tells firmware to perform
+			   specific scan for the SSID filled */
+			wildcard_ssid_tlv->max_ssid_length = 0;
 
 			memcpy(wildcard_ssid_tlv->ssid,
 			       user_scan_in->ssid_list[ssid_idx].ssid,
@@ -1469,7 +1471,7 @@
 			       s32 rssi, const u8 *ie_buf, size_t ie_len,
 			       u16 beacon_period, u16 cap_info_bitmap, u8 band)
 {
-	struct mwifiex_bssdescriptor *bss_desc = NULL;
+	struct mwifiex_bssdescriptor *bss_desc;
 	int ret;
 	unsigned long flags;
 	u8 *beacon_ie;
@@ -1484,6 +1486,7 @@
 
 	beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL);
 	if (!beacon_ie) {
+		kfree(bss_desc);
 		dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c
index 527cf53..4df8cf6 100644
--- a/drivers/net/wireless/orinoco/fw.c
+++ b/drivers/net/wireless/orinoco/fw.c
@@ -6,6 +6,7 @@
 #include <linux/slab.h>
 #include <linux/firmware.h>
 #include <linux/device.h>
+#include <linux/module.h>
 
 #include "hermes.h"
 #include "hermes_dld.h"
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 8b6f363..fa8ce51 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -24,6 +24,7 @@
 
 #include <net/mac80211.h>
 #include <linux/crc-ccitt.h>
+#include <linux/export.h>
 
 #include "p54.h"
 #include "eeprom.h"
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index 53a3408..18e82b3 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/firmware.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 
 #include <net/mac80211.h>
 
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index ad9ae04..db4d9a0 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/firmware.h>
 #include <linux/etherdevice.h>
+#include <linux/module.h>
 
 #include <net/mac80211.h>
 
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 1b75317..b1f51a2 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -20,6 +20,7 @@
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 
 #include "p54.h"
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index f18df82..78d0d69 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -588,8 +588,6 @@
 
 	WARN_ON(priv->fw_state != FW_STATE_READY);
 
-	cancel_work_sync(&priv->work);
-
 	p54spi_power_off(priv);
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	INIT_LIST_HEAD(&priv->tx_pending);
@@ -597,6 +595,8 @@
 
 	priv->fw_state = FW_STATE_OFF;
 	mutex_unlock(&priv->mutex);
+
+	cancel_work_sync(&priv->work);
 }
 
 static int __devinit p54spi_probe(struct spi_device *spi)
@@ -656,6 +656,7 @@
 	init_completion(&priv->fw_comp);
 	INIT_LIST_HEAD(&priv->tx_pending);
 	mutex_init(&priv->mutex);
+	spin_lock_init(&priv->tx_lock);
 	SET_IEEE80211_DEV(hw, &spi->dev);
 	priv->common.open = p54spi_op_start;
 	priv->common.stop = p54spi_op_stop;
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index a8f3bc7..9b60968 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -20,6 +20,7 @@
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
 #include <linux/crc32.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 
 #include "p54.h"
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index f485784..6ed9c32 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -16,6 +16,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/firmware.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index d97a2caf..bc2ba80 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -778,7 +778,7 @@
 		dwrq->flags = 0;
 		dwrq->length = 0;
 	}
-	essid->octets[essid->length] = '\0';
+	essid->octets[dwrq->length] = '\0';
 	memcpy(extra, essid->octets, dwrq->length);
 	kfree(essid);
 
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 3f183a1..1ba079d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3771,7 +3771,7 @@
 	/* Apparently the data is read from end to start */
 	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, &reg);
 	/* The returned value is in CPU order, but eeprom is le */
-	rt2x00dev->eeprom[i] = cpu_to_le32(reg);
+	*(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
 	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, &reg);
 	*(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
 	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, &reg);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index f156579..3778763 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -919,6 +919,7 @@
 	{ USB_DEVICE(0x050d, 0x935b) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00e8) },
+	{ USB_DEVICE(0x0411, 0x0158) },
 	{ USB_DEVICE(0x0411, 0x016f) },
 	{ USB_DEVICE(0x0411, 0x01a2) },
 	/* Corega */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2ec5c00..99ff12d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -943,6 +943,7 @@
 	 * Powersaving work
 	 */
 	struct delayed_work autowakeup_work;
+	struct work_struct sleep_work;
 
 	/*
 	 * Data queue arrays for RX, TX, Beacon and ATIM.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e1fb2a8..edd317f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -465,6 +465,23 @@
 	return NULL;
 }
 
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, sleep_work);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Check again is powersaving is enabled, to prevent races from delayed
+	 * work execution.
+	 */
+	if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+				 IEEE80211_CONF_CHANGE_PS);
+}
+
 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb,
 				      struct rxdone_entry_desc *rxdesc)
@@ -512,8 +529,7 @@
 	cam |= (tim_ie->bitmap_ctrl & 0x01);
 
 	if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
-		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
-				 IEEE80211_CONF_CHANGE_PS);
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
 }
 
 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
@@ -1141,6 +1157,7 @@
 
 	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
 	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+	INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
 
 	/*
 	 * Let the driver probe the device to detect the capabilities.
@@ -1197,6 +1214,7 @@
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+	cancel_work_sync(&rt2x00dev->sleep_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
 		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 0082015..2f14a5f 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 24873b5..4a78f9e 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/eeprom_93cx6.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 
 #include "rtl8187.h"
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index d4fdd2a..b4ce934 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -30,6 +30,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/ip.h>
+#include <linux/module.h>
 #include "wifi.h"
 #include "rc.h"
 #include "base.h"
diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
index 7babb6a..dc36d74 100644
--- a/drivers/net/wireless/rtlwifi/cam.c
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -29,6 +29,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/export.h>
 #include "wifi.h"
 #include "cam.h"
 
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 3fc21f6..ed1058b 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/export.h>
 #include "wifi.h"
 #include "efuse.h"
 
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 177a8e6..eb61061 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/export.h>
 #include "core.h"
 #include "wifi.h"
 #include "pci.h"
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
index a693fef..55c8e50 100644
--- a/drivers/net/wireless/rtlwifi/ps.c
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/export.h>
 #include "wifi.h"
 #include "base.h"
 #include "ps.h"
@@ -394,7 +395,7 @@
 	if (mac->link_state != MAC80211_LINKED)
 		return;
 
-	spin_lock(&rtlpriv->locks.lps_lock);
+	spin_lock_irq(&rtlpriv->locks.lps_lock);
 
 	/* Idle for a while if we connect to AP a while ago. */
 	if (mac->cnt_after_linked >= 2) {
@@ -406,7 +407,7 @@
 		}
 	}
 
-	spin_unlock(&rtlpriv->locks.lps_lock);
+	spin_unlock_irq(&rtlpriv->locks.lps_lock);
 }
 
 /*Leave the leisure power save mode.*/
@@ -415,8 +416,9 @@
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	unsigned long flags;
 
-	spin_lock(&rtlpriv->locks.lps_lock);
+	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flags);
 
 	if (ppsc->fwctrl_lps) {
 		if (ppsc->dot11_psmode != EACTIVE) {
@@ -437,7 +439,7 @@
 			rtl_lps_set_psmode(hw, EACTIVE);
 		}
 	}
-	spin_unlock(&rtlpriv->locks.lps_lock);
+	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flags);
 }
 
 /* For sw LPS*/
@@ -538,9 +540,9 @@
 		RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
 	}
 
-	spin_lock(&rtlpriv->locks.lps_lock);
+	spin_lock_irq(&rtlpriv->locks.lps_lock);
 	rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS);
-	spin_unlock(&rtlpriv->locks.lps_lock);
+	spin_unlock_irq(&rtlpriv->locks.lps_lock);
 }
 
 void rtl_swlps_rfon_wq_callback(void *data)
@@ -573,9 +575,9 @@
 	if (rtlpriv->link_info.busytraffic)
 		return;
 
-	spin_lock(&rtlpriv->locks.lps_lock);
+	spin_lock_irq(&rtlpriv->locks.lps_lock);
 	rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS);
-	spin_unlock(&rtlpriv->locks.lps_lock);
+	spin_unlock_irq(&rtlpriv->locks.lps_lock);
 
 	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
 		!RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index a00774e..72a98ca 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/export.h>
 #include "dm_common.h"
 #include "phy_common.h"
 #include "../pci.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
index 49a064b..950c65a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
@@ -30,6 +30,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/firmware.h>
+#include <linux/export.h>
 #include "../wifi.h"
 #include "../pci.h"
 #include "../base.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/main.c b/drivers/net/wireless/rtlwifi/rtl8192c/main.c
index 2f624fc..605ff19 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/main.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/main.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/module.h>
 #include "../wifi.h"
 
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
index 3b11642..1f07558 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
@@ -27,6 +27,7 @@
  *
  *****************************************************************************/
 
+#include <linux/export.h>
 #include "../wifi.h"
 #include "../rtl8192ce/reg.h"
 #include "../rtl8192ce/def.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index a48404c..f2aa33d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -28,6 +28,7 @@
  *****************************************************************************/
 
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 #include "../wifi.h"
 #include "../core.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index feed1ed..c244f2f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -42,6 +42,7 @@
 #include "led.h"
 #include "hw.h"
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Georgia		<georgia@realtek.com>");
 MODULE_AUTHOR("Ziv Huang	<ziv_huang@realtek.com>");
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
index 691f800..149493f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
@@ -30,6 +30,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 #include "../wifi.h"
 #include "../core.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 3ec9a0d..92f49d5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -30,6 +30,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 
 #include "../wifi.h"
 #include "../core.h"
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index b42c2e2..54cb8a6 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -28,6 +28,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/usb.h>
+#include <linux/export.h>
 #include "core.h"
 #include "wifi.h"
 #include "usb.h"
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index d4e628d..6813379 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -23,6 +23,7 @@
 
 #include <linux/slab.h>
 #include <linux/wl12xx.h>
+#include <linux/export.h>
 
 #include "acx.h"
 #include "reg.h"
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 128ccb7..fc29c67 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -559,7 +559,7 @@
 						break;
 					}
 				/* Fail if SSID isn't present in the filters */
-				if (j == req->n_ssids) {
+				if (j == cmd->n_ssids) {
 					ret = -EINVAL;
 					goto out_free;
 				}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index cf0d69d..785bdbe 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -28,6 +28,7 @@
 #include <linux/skbuff.h>
 #include <linux/usb.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <net/mac80211.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 161f207..94b79c3 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -58,10 +58,6 @@
 	u8               fe_dev_addr[6];
 
 	/* Physical parameters of the comms window. */
-	grant_handle_t   tx_shmem_handle;
-	grant_ref_t      tx_shmem_ref;
-	grant_handle_t   rx_shmem_handle;
-	grant_ref_t      rx_shmem_ref;
 	unsigned int     irq;
 
 	/* List of frontends to notify after a batch of frames sent. */
@@ -70,8 +66,6 @@
 	/* The shared rings and indexes. */
 	struct xen_netif_tx_back_ring tx;
 	struct xen_netif_rx_back_ring rx;
-	struct vm_struct *tx_comms_area;
-	struct vm_struct *rx_comms_area;
 
 	/* Frontend feature information. */
 	u8 can_sg:1;
@@ -106,6 +100,11 @@
 	wait_queue_head_t waiting_to_free;
 };
 
+static inline struct xenbus_device *xenvif_to_xenbus_device(struct xenvif *vif)
+{
+	return to_xenbus_device(vif->dev->dev.parent);
+}
+
 #define XEN_NETIF_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
 #define XEN_NETIF_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
 
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index d550895..1ae270e 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1021,7 +1021,7 @@
 		pending_idx = *((u16 *)skb->data);
 		xen_netbk_idx_release(netbk, pending_idx);
 		for (j = start; j < i; j++) {
-			pending_idx = frag_get_pending_idx(&shinfo->frags[i]);
+			pending_idx = frag_get_pending_idx(&shinfo->frags[j]);
 			xen_netbk_idx_release(netbk, pending_idx);
 		}
 
@@ -1589,88 +1589,42 @@
 
 void xen_netbk_unmap_frontend_rings(struct xenvif *vif)
 {
-	struct gnttab_unmap_grant_ref op;
-
-	if (vif->tx.sring) {
-		gnttab_set_unmap_op(&op, (unsigned long)vif->tx_comms_area->addr,
-				    GNTMAP_host_map, vif->tx_shmem_handle);
-
-		if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
-			BUG();
-	}
-
-	if (vif->rx.sring) {
-		gnttab_set_unmap_op(&op, (unsigned long)vif->rx_comms_area->addr,
-				    GNTMAP_host_map, vif->rx_shmem_handle);
-
-		if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
-			BUG();
-	}
-	if (vif->rx_comms_area)
-		free_vm_area(vif->rx_comms_area);
-	if (vif->tx_comms_area)
-		free_vm_area(vif->tx_comms_area);
+	if (vif->tx.sring)
+		xenbus_unmap_ring_vfree(xenvif_to_xenbus_device(vif),
+					vif->tx.sring);
+	if (vif->rx.sring)
+		xenbus_unmap_ring_vfree(xenvif_to_xenbus_device(vif),
+					vif->rx.sring);
 }
 
 int xen_netbk_map_frontend_rings(struct xenvif *vif,
 				 grant_ref_t tx_ring_ref,
 				 grant_ref_t rx_ring_ref)
 {
-	struct gnttab_map_grant_ref op;
+	void *addr;
 	struct xen_netif_tx_sring *txs;
 	struct xen_netif_rx_sring *rxs;
 
 	int err = -ENOMEM;
 
-	vif->tx_comms_area = alloc_vm_area(PAGE_SIZE);
-	if (vif->tx_comms_area == NULL)
+	err = xenbus_map_ring_valloc(xenvif_to_xenbus_device(vif),
+				     tx_ring_ref, &addr);
+	if (err)
 		goto err;
 
-	vif->rx_comms_area = alloc_vm_area(PAGE_SIZE);
-	if (vif->rx_comms_area == NULL)
-		goto err;
-
-	gnttab_set_map_op(&op, (unsigned long)vif->tx_comms_area->addr,
-			  GNTMAP_host_map, tx_ring_ref, vif->domid);
-
-	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
-		BUG();
-
-	if (op.status) {
-		netdev_warn(vif->dev,
-			    "failed to map tx ring. err=%d status=%d\n",
-			    err, op.status);
-		err = op.status;
-		goto err;
-	}
-
-	vif->tx_shmem_ref    = tx_ring_ref;
-	vif->tx_shmem_handle = op.handle;
-
-	txs = (struct xen_netif_tx_sring *)vif->tx_comms_area->addr;
+	txs = (struct xen_netif_tx_sring *)addr;
 	BACK_RING_INIT(&vif->tx, txs, PAGE_SIZE);
 
-	gnttab_set_map_op(&op, (unsigned long)vif->rx_comms_area->addr,
-			  GNTMAP_host_map, rx_ring_ref, vif->domid);
-
-	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
-		BUG();
-
-	if (op.status) {
-		netdev_warn(vif->dev,
-			    "failed to map rx ring. err=%d status=%d\n",
-			    err, op.status);
-		err = op.status;
+	err = xenbus_map_ring_valloc(xenvif_to_xenbus_device(vif),
+				     rx_ring_ref, &addr);
+	if (err)
 		goto err;
-	}
 
-	vif->rx_shmem_ref     = rx_ring_ref;
-	vif->rx_shmem_handle  = op.handle;
-	vif->rx_req_cons_peek = 0;
-
-	rxs = (struct xen_netif_rx_sring *)vif->rx_comms_area->addr;
+	rxs = (struct xen_netif_rx_sring *)addr;
 	BACK_RING_INIT(&vif->rx, rxs, PAGE_SIZE);
 
+	vif->rx_req_cons_peek = 0;
+
 	return 0;
 
 err:
diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
index 5b0f1ff..06c3642 100644
--- a/drivers/nfc/nfcwilink.c
+++ b/drivers/nfc/nfcwilink.c
@@ -27,6 +27,7 @@
  *
  */
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/nfc.h>
 #include <net/nfc/nci.h>
 #include <net/nfc/nci_core.h>
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index aeec35b..fd85fa2 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -681,9 +681,14 @@
 	if (p != NULL && l > 0)
 		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
 
+	/*
+	 * CONFIG_CMDLINE is meant to be a default in case nothing else
+	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
+	 * is set in which case we override whatever was found earlier.
+	 */
 #ifdef CONFIG_CMDLINE
 #ifndef CONFIG_CMDLINE_FORCE
-	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+	if (!((char *)data)[0])
 #endif
 		strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
 #endif /* CONFIG_CMDLINE */
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6d3dd39..19c0115 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -60,27 +60,27 @@
  */
 struct device_node *of_irq_find_parent(struct device_node *child)
 {
-	struct device_node *p, *c = child;
+	struct device_node *p;
 	const __be32 *parp;
 
-	if (!of_node_get(c))
+	if (!of_node_get(child))
 		return NULL;
 
 	do {
-		parp = of_get_property(c, "interrupt-parent", NULL);
+		parp = of_get_property(child, "interrupt-parent", NULL);
 		if (parp == NULL)
-			p = of_get_parent(c);
+			p = of_get_parent(child);
 		else {
 			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
 				p = of_node_get(of_irq_dflt_pic);
 			else
 				p = of_find_node_by_phandle(be32_to_cpup(parp));
 		}
-		of_node_put(c);
-		c = p;
+		of_node_put(child);
+		child = p;
 	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
 
-	return (p == child) ? NULL : p;
+	return p;
 }
 
 /**
@@ -424,6 +424,8 @@
 
 		desc->dev = np;
 		desc->interrupt_parent = of_irq_find_parent(np);
+		if (desc->interrupt_parent == np)
+			desc->interrupt_parent = NULL;
 		list_add_tail(&desc->list, &intc_desc_list);
 	}
 
diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
index bb18471..ffab033 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/of_net.h>
 #include <linux/phy.h>
+#include <linux/export.h>
 
 /**
  * It maps 'enum phy_interface_t' found in include/linux/phy.h
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 3701b62..13e37e2 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <asm/prom.h>
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index ac1ec54..9312516 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -1,6 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/of_pci.h>
 #include <linux/of_irq.h>
+#include <linux/export.h>
 #include <asm/prom.h>
 
 /**
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
index 1dbce58..6dbc074 100644
--- a/drivers/of/of_spi.c
+++ b/drivers/of/of_spi.c
@@ -6,6 +6,7 @@
  * tree.
  */
 
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index ed5a6d3..cbd5d70 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -310,18 +310,21 @@
 				 struct device_node *np)
 {
 	struct resource res;
-	if (lookup) {
-		for(; lookup->name != NULL; lookup++) {
-			if (!of_device_is_compatible(np, lookup->compatible))
-				continue;
-			if (of_address_to_resource(np, 0, &res))
-				continue;
-			if (res.start != lookup->phys_addr)
-				continue;
-			pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
-			return lookup;
-		}
+
+	if (!lookup)
+		return NULL;
+
+	for(; lookup->name != NULL; lookup++) {
+		if (!of_device_is_compatible(np, lookup->compatible))
+			continue;
+		if (of_address_to_resource(np, 0, &res))
+			continue;
+		if (res.start != lookup->phys_addr)
+			continue;
+		pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
+		return lookup;
 	}
+
 	return NULL;
 }
 
@@ -329,8 +332,9 @@
  * of_platform_bus_create() - Create a device for a node and its children.
  * @bus: device node of the bus to instantiate
  * @matches: match table for bus nodes
- * disallow recursive creation of child buses
+ * @lookup: auxdata table for matching id and platform_data with device nodes
  * @parent: parent for new device, or NULL for top level.
+ * @strict: require compatible property
  *
  * Creates a platform_device for the provided device_node, and optionally
  * recursively create devices for all the child nodes.
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 75a80e46b..8b490d7 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -44,6 +44,7 @@
 #include <linux/seq_file.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
+#include <linux/export.h>
 
 #include <asm/byteorder.h>
 #include <asm/cache.h>		/* for L1_CACHE_BYTES */
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index a6f7621..8644d53 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -39,6 +39,7 @@
 
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/module.h>
 
 #include <asm/ropes.h>
 #include <asm/mckinley.h>	/* for proc_mckinley_root */
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index cec6606..f02b523 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -51,17 +51,6 @@
           The PCI device frontend driver allows the kernel to import arbitrary
           PCI devices from a PCI backend to support PCI driver domains.
 
-config XEN_PCIDEV_FE_DEBUG
-        bool "Xen PCI Frontend debugging"
-        depends on XEN_PCIDEV_FRONTEND && PCI_DEBUG
-	help
-	  Say Y here if you want the Xen PCI frontend to produce a bunch of debug
-	  messages to the system log.  Select this if you are having a
-	  problem with Xen PCI frontend support and want to see more of what is
-	  going on.
-
-	  When in doubt, say N.
-
 config HT_IRQ
 	bool "Interrupts on hypertransport devices"
 	default y
@@ -87,6 +76,7 @@
 
 config PCI_PRI
 	bool "PCI PRI support"
+	depends on PCI
 	select PCI_ATS
 	help
 	  PRI is the PCI Page Request Interface. It allows PCI devices that are
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index f727a09..7ec56fb 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -10,6 +10,7 @@
  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
  */
 
+#include <linux/export.h>
 #include <linux/pci-ats.h>
 #include <linux/pci.h>
 
diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c
index 4d4a6447..d3509cd 100644
--- a/drivers/pci/hotplug-pci.c
+++ b/drivers/pci/hotplug-pci.c
@@ -1,6 +1,7 @@
 /* Core PCI functionality used only by PCI hotplug */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include "pci.h"
 
 
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 596172b..fce1c54 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -459,8 +459,17 @@
 {
 	acpi_status status;
 	unsigned long long tmp;
+	struct acpi_pci_root *root;
 	acpi_handle dummy_handle;
 
+	/*
+	 * We shouldn't use this bridge if PCIe native hotplug control has been
+	 * granted by the BIOS for it.
+	 */
+	root = acpi_pci_find_root(handle);
+	if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
+		return -ENODEV;
+
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
 	if (ACPI_SUCCESS(status)) {
@@ -1376,13 +1385,23 @@
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
+	struct acpi_pci_root *root;
 	int *count = (int *)context;
 
-	if (acpi_is_root_bridge(handle)) {
-		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-				handle_hotplug_event_bridge, NULL);
-			(*count)++;
-	}
+	if (!acpi_is_root_bridge(handle))
+		return AE_OK;
+
+	root = acpi_pci_find_root(handle);
+	if (!root)
+		return AE_OK;
+
+	if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
+		return AE_OK;
+
+	(*count)++;
+	acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+				    handle_hotplug_event_bridge, NULL);
+
 	return AE_OK ;
 }
 
diff --git a/drivers/pci/hotplug/pciehp_acpi.c b/drivers/pci/hotplug/pciehp_acpi.c
index 5f72262..376d70d 100644
--- a/drivers/pci/hotplug/pciehp_acpi.c
+++ b/drivers/pci/hotplug/pciehp_acpi.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "pciehp.h"
 
 #define PCIEHP_DETECT_PCIE	(0)
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 1e9c9aa..085dbb5 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -213,9 +213,6 @@
 		goto err_exit;
 	}
 
-	/* Wait for 1 second after checking link training status */
-	msleep(1000);
-
 	/* Check for a power fault */
 	if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) {
 		ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot));
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 96dc473..7b14148 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -280,6 +280,14 @@
         else
                 msleep(1000);
 
+	/*
+	 * Need to wait for 1000 ms after Data Link Layer Link Active
+	 * (DLLLA) bit reads 1b before sending configuration request.
+	 * We need it before checking Link Training (LT) bit becuase
+	 * LT is still set even after DLLLA bit is set on some platform.
+	 */
+	msleep(1000);
+
 	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
 	if (retval) {
 		ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
@@ -294,6 +302,16 @@
 		return retval;
 	}
 
+	/*
+	 * If the port supports Link speeds greater than 5.0 GT/s, we
+	 * must wait for 100 ms after Link training completes before
+	 * sending configuration request.
+	 */
+	if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT)
+		msleep(100);
+
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -484,7 +502,6 @@
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
-	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -516,14 +533,6 @@
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
-				__func__);
-		return retval;
-	}
-	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
-
 	return retval;
 }
 
diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c
index 3ffd9c1a..8c05a18 100644
--- a/drivers/pci/hotplug/pcihp_slot.c
+++ b/drivers/pci/hotplug/pcihp_slot.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <linux/pci_hotplug.h>
 
 static struct hpp_type0 pci_default_type0 = {
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 1d002b1..c56a941 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -18,6 +18,7 @@
 #undef DEBUG
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index aca972b..dd7e0c5 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -278,8 +278,8 @@
 
 static int is_shpc_capable(struct pci_dev *dev)
 {
-	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
-						PCI_DEVICE_ID_AMD_GOLAM_7450))
+	if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
 		return 1;
 	if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
 		return 0;
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 36547f0..75ba231 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -944,8 +944,8 @@
 	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
 	ctrl_dbg(ctrl, "Hotplug Controller:\n");
 
-	if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
-				PCI_DEVICE_ID_AMD_GOLAM_7450)) {
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) {
 		/* amd shpc driver doesn't use Base Offset; assume 0 */
 		ctrl->mmio_base = pci_resource_start(pdev, 0);
 		ctrl->mmio_size = pci_resource_len(pdev, 0);
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index db057b6..6e373ea 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -9,6 +9,7 @@
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/htirq.h>
 
diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c
index 203508b..5775638 100644
--- a/drivers/pci/ioapic.c
+++ b/drivers/pci/ioapic.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
 #include <acpi/acpi_bus.h>
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 9b4e88c..b82c155 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/pci-ats.h>
diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c
index de01174..e5f69a4 100644
--- a/drivers/pci/irq.c
+++ b/drivers/pci/irq.c
@@ -7,6 +7,7 @@
 #include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 
 static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 2f10328..0e6d04d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 7bcf12a..106be0d 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/stat.h>
+#include <linux/export.h>
 #include <linux/topology.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7285145..6476547 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -17,6 +17,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 36864a9..48ebdb2 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -7,6 +7,7 @@
  * PCI ROM access routines
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 51a9095..5717509b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -18,6 +18,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 968cfea..ac6412f 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -7,6 +7,7 @@
 
 #include <linux/kobject.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/err.h>
 #include "pci.h"
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index a5a5ca1..39b7907 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 
 int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt)
 {
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 01757f1..3e49df6 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/pm.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/resource.h>
 #include <linux/slab.h>
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 2c54054..a87e272 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -231,6 +231,7 @@
 
 	__raw_writel(mecr, MECR);
 }
+EXPORT_SYMBOL(pxa2xx_configure_sockets);
 
 static const char *skt_names[] = {
 	"PCMCIA socket 0",
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 63f4d52..0b4f946 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 6ee42b4..923f315 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/export.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/pxa2xx_cm_x2xx.c b/drivers/pcmcia/pxa2xx_cm_x2xx.c
index 4f09506..6e7dcfd 100644
--- a/drivers/pcmcia/pxa2xx_cm_x2xx.c
+++ b/drivers/pcmcia/pxa2xx_cm_x2xx.c
@@ -12,9 +12,8 @@
 
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <asm/mach-types.h>
-#include <mach/system.h>
+#include <mach/hardware.h>
 
 int cmx255_pcmcia_init(void);
 int cmx270_pcmcia_init(void);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ef56644..e17e2f8 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -2,23 +2,17 @@
 # PINCTRL infrastructure and drivers
 #
 
-menuconfig PINCTRL
-	bool "PINCTRL Support"
+config PINCTRL
+	bool
 	depends on EXPERIMENTAL
-	help
-	  This enables the PINCTRL subsystem for controlling pins
-	  on chip packages, for example multiplexing pins on primarily
-	  PGA and BGA packages for systems on chip.
-
-	  If unsure, say N.
 
 if PINCTRL
 
+menu "Pin controllers"
+	depends on PINCTRL
+
 config PINMUX
 	bool "Support pinmux controllers"
-	help
-	  Say Y here if you want the pincontrol subsystem to handle pin
-	  multiplexing drivers.
 
 config DEBUG_PINCTRL
 	bool "Debug PINCTRL calls"
@@ -30,14 +24,12 @@
 	bool "CSR SiRFprimaII pinmux driver"
 	depends on ARCH_PRIMA2
 	select PINMUX
-	help
-	  Say Y here to enable the SiRFprimaII pinmux driver
 
 config PINMUX_U300
 	bool "U300 pinmux driver"
 	depends on ARCH_U300
 	select PINMUX
-	help
-	  Say Y here to enable the U300 pinmux driver
+
+endmenu
 
 endif
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 423522d..eadef9e 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -12,6 +12,7 @@
 #define pr_fmt(fmt) "pinctrl core: " fmt
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/slab.h>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f4e3d82..7f43cf8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -83,8 +83,10 @@
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL || RFKILL = n
-	depends on POWER_SUPPLY
 	depends on SERIO_I8042
+	select POWER_SUPPLY
+	select LEDS_CLASS
+	select NEW_LEDS
 	default n
 	---help---
 	This driver adds support for rfkill and backlight control to Dell
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index a43cfd9..d93e962 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -589,14 +589,14 @@
 	.update_status  = dell_send_intensity,
 };
 
-static void touchpad_led_on()
+static void touchpad_led_on(void)
 {
 	int command = 0x97;
 	char data = 1;
 	i8042_command(&data, command | 1 << 12);
 }
 
-static void touchpad_led_off()
+static void touchpad_led_off(void)
 {
 	int command = 0x97;
 	char data = 2;
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index c866653..48870e5 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -24,6 +24,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/sfi.h>
+#include <linux/module.h>
 #include <asm/mrst.h>
 #include <asm/intel_scu_ipc.h>
 
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 6f40bf2..2264331 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -28,6 +28,7 @@
 #include <linux/acpi.h>
 #include <linux/backlight.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
 MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver");
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 9b88be4..a134c26 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -36,6 +36,7 @@
 #include <linux/list.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index ca84d50..b00c176 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/pnp.h>
 #include <linux/slab.h>
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index bbf3edd..5be4a39 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -509,15 +509,12 @@
 					    struct acpi_resource_dma *p)
 {
 	int i;
-	unsigned char map = 0, flags = 0;
-
-	if (p->channel_count == 0)
-		flags |= IORESOURCE_DISABLED;
+	unsigned char map = 0, flags;
 
 	for (i = 0; i < p->channel_count; i++)
 		map |= 1 << p->channels[i];
 
-	flags |= dma_flags(dev, p->type, p->bus_master, p->transfer);
+	flags = dma_flags(dev, p->type, p->bus_master, p->transfer);
 	pnp_register_dma_resource(dev, option_flags, map, flags);
 }
 
@@ -527,17 +524,14 @@
 {
 	int i;
 	pnp_irq_mask_t map;
-	unsigned char flags = 0;
-
-	if (p->interrupt_count == 0)
-		flags |= IORESOURCE_DISABLED;
+	unsigned char flags;
 
 	bitmap_zero(map.bits, PNP_IRQ_NR);
 	for (i = 0; i < p->interrupt_count; i++)
 		if (p->interrupts[i])
 			__set_bit(p->interrupts[i], map.bits);
 
-	flags |= irq_flags(p->triggering, p->polarity, p->sharable);
+	flags = irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -547,10 +541,7 @@
 {
 	int i;
 	pnp_irq_mask_t map;
-	unsigned char flags = 0;
-
-	if (p->interrupt_count == 0)
-		flags |= IORESOURCE_DISABLED;
+	unsigned char flags;
 
 	bitmap_zero(map.bits, PNP_IRQ_NR);
 	for (i = 0; i < p->interrupt_count; i++) {
@@ -564,7 +555,7 @@
 		}
 	}
 
-	flags |= irq_flags(p->triggering, p->polarity, p->sharable);
+	flags = irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -574,11 +565,8 @@
 {
 	unsigned char flags = 0;
 
-	if (io->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (io->io_decode == ACPI_DECODE_16)
-		flags |= IORESOURCE_IO_16BIT_ADDR;
+		flags = IORESOURCE_IO_16BIT_ADDR;
 	pnp_register_port_resource(dev, option_flags, io->minimum, io->maximum,
 				   io->alignment, io->address_length, flags);
 }
@@ -587,13 +575,8 @@
 					unsigned int option_flags,
 					struct acpi_resource_fixed_io *io)
 {
-	unsigned char flags = 0;
-
-	if (io->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	pnp_register_port_resource(dev, option_flags, io->address, io->address,
-				   0, io->address_length, flags | IORESOURCE_IO_FIXED);
+				   0, io->address_length, IORESOURCE_IO_FIXED);
 }
 
 static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
@@ -602,11 +585,8 @@
 {
 	unsigned char flags = 0;
 
-	if (p->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags |= IORESOURCE_MEM_WRITEABLE;
+		flags = IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
 				  p->alignment, p->address_length, flags);
 }
@@ -617,11 +597,8 @@
 {
 	unsigned char flags = 0;
 
-	if (p->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags |= IORESOURCE_MEM_WRITEABLE;
+		flags = IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
 				  p->alignment, p->address_length, flags);
 }
@@ -632,11 +609,8 @@
 {
 	unsigned char flags = 0;
 
-	if (p->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags |= IORESOURCE_MEM_WRITEABLE;
+		flags = IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->address, p->address,
 				  0, p->address_length, flags);
 }
@@ -656,19 +630,16 @@
 		return;
 	}
 
-	if (p->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (p->resource_type == ACPI_MEMORY_RANGE) {
 		if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
-			flags |= IORESOURCE_MEM_WRITEABLE;
+			flags = IORESOURCE_MEM_WRITEABLE;
 		pnp_register_mem_resource(dev, option_flags, p->minimum,
 					  p->minimum, 0, p->address_length,
 					  flags);
 	} else if (p->resource_type == ACPI_IO_RANGE)
 		pnp_register_port_resource(dev, option_flags, p->minimum,
 					   p->minimum, 0, p->address_length,
-					   flags | IORESOURCE_IO_FIXED);
+					   IORESOURCE_IO_FIXED);
 }
 
 static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
@@ -678,19 +649,16 @@
 	struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
 	unsigned char flags = 0;
 
-	if (p->address_length == 0)
-		flags |= IORESOURCE_DISABLED;
-
 	if (p->resource_type == ACPI_MEMORY_RANGE) {
 		if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
-			flags |= IORESOURCE_MEM_WRITEABLE;
+			flags = IORESOURCE_MEM_WRITEABLE;
 		pnp_register_mem_resource(dev, option_flags, p->minimum,
 					  p->minimum, 0, p->address_length,
 					  flags);
 	} else if (p->resource_type == ACPI_IO_RANGE)
 		pnp_register_port_resource(dev, option_flags, p->minimum,
 					   p->minimum, 0, p->address_length,
-					   flags | IORESOURCE_IO_FIXED);
+					   IORESOURCE_IO_FIXED);
 }
 
 struct acpipnp_parse_option_s {
diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c
index 98bfab3..9f0183c 100644
--- a/drivers/power/max17042_battery.c
+++ b/drivers/power/max17042_battery.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/mod_devicetable.h>
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index a9b0209..2595145 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -22,6 +22,7 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/power_supply.h>
 #include <linux/platform_device.h>
diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
index ffc5033..a23317d 100644
--- a/drivers/power/max8997_charger.c
+++ b/drivers/power/max8997_charger.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c
index ef8efad..93e3bb4 100644
--- a/drivers/power/max8998_charger.c
+++ b/drivers/power/max8998_charger.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 605514a..e15d4c9 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -14,6 +14,7 @@
 #include <linux/ctype.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 
 #include "power_supply.h"
 
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index d9fb729..fb73008 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -952,7 +952,7 @@
 	}
 
 	result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
-		IRQF_DISABLED, "vuart", &vuart_bus_priv);
+		0, "vuart", &vuart_bus_priv);
 
 	if (result) {
 		pr_debug("%s:%d: request_irq failed (%d)\n",
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index af0afa1..8c3f5ad 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include <asm/lv1call.h>
 #include <asm/ps3stor.h>
@@ -166,7 +167,7 @@
 		goto fail_close_device;
 	}
 
-	error = request_irq(dev->irq, handler, IRQF_DISABLED,
+	error = request_irq(dev->irq, handler, 0,
 			    dev->sbd.core.driver->name, dev);
 	if (error) {
 		dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n",
diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c
index 4742258..0e41737 100644
--- a/drivers/ps3/sys-manager-core.c
+++ b/drivers/ps3/sys-manager-core.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
 
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
index 043ee31..809b7a3 100644
--- a/drivers/rapidio/switches/idt_gen2.c
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+#include <linux/stat.h>
 #include <linux/rio.h>
 #include <linux/rio_drv.h>
 #include <linux/rio_ids.h>
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index e821b21..ca0d608 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -16,6 +16,7 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
 
 struct pm8607_regulator_info {
 	struct regulator_desc	desc;
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index 5abeb3a..298c6c6 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -160,7 +160,7 @@
 			break;
 	}
 
-	if (!ri)
+	if (i == ARRAY_SIZE(aat2870_regulators))
 		return NULL;
 
 	ri->enable_addr = AAT2870_LDO_EN;
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 02f3c23..6e1ae69 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -13,6 +13,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ab8500.h>
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index 068d488..e24d1b7 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/regulator/bq24022.h>
 #include <linux/regulator/driver.h>
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 67fa2a3..938398f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/module.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/regulator.h>
@@ -2798,8 +2799,8 @@
 	list_del(&rdev->list);
 	if (rdev->supply)
 		regulator_put(rdev->supply);
-	device_unregister(&rdev->dev);
 	kfree(rdev->constraints);
+	device_unregister(&rdev->dev);
 	mutex_unlock(&regulator_list_mutex);
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 362e082..e23ddfa 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index 2bb8f45..7832975 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -13,10 +13,11 @@
 #include <linux/err.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/db8500-prcmu.h>
+#include <linux/module.h>
 
 /*
  * power state reference count
diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c
index f6ef669..b8f5205 100644
--- a/drivers/regulator/dummy.c
+++ b/drivers/regulator/dummy.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 2fe9d99c..21ecf21 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -20,6 +20,7 @@
 
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 0f22ef1..72b16b5 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/lp3971.h>
 #include <linux/slab.h>
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 6aa1b50..fbc5e37 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -12,6 +12,7 @@
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/lp3972.h>
diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c
index e4dbd66..cc9ec0e0 100644
--- a/drivers/regulator/max8925-regulator.c
+++ b/drivers/regulator/max8925-regulator.c
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index ad6628c..6176129 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 730f43a..8479082 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include "mc13xxx.h"
 
 #define MC13783_REG_SWITCHERS5			29
@@ -336,9 +337,9 @@
 {
 	struct mc13xxx_regulator_priv *priv;
 	struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
-	struct mc13783_regulator_platform_data *pdata =
+	struct mc13xxx_regulator_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
-	struct mc13783_regulator_init_data *init_data;
+	struct mc13xxx_regulator_init_data *init_data;
 	int i, ret;
 
 	dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
@@ -381,7 +382,7 @@
 static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
 {
 	struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
-	struct mc13783_regulator_platform_data *pdata =
+	struct mc13xxx_regulator_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
 	int i;
 
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 3285d41..023d17d 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include "mc13xxx.h"
 
 #define MC13892_REVISION			7
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index bc27ab1..6532853 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include "mc13xxx.h"
 
 static int mc13xxx_regulator_enable(struct regulator_dev *rdev)
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index dbcf09d..14b9389 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 66d2d60..b552aae 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -664,10 +664,10 @@
 
 	switch (id) {
 	case TPS65910_REG_VDD1:
-		dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		if (dcdc_mult == 1)
 			dcdc_mult--;
-		vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+		vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
 		tps65910_modify_bits(pmic, TPS65910_VDD1,
 				(dcdc_mult << VDD1_VGAIN_SEL_SHIFT),
@@ -675,10 +675,10 @@
 		tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel);
 		break;
 	case TPS65910_REG_VDD2:
-		dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		if (dcdc_mult == 1)
 			dcdc_mult--;
-		vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+		vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
 		tps65910_modify_bits(pmic, TPS65910_VDD2,
 				(dcdc_mult << VDD2_VGAIN_SEL_SHIFT),
@@ -756,9 +756,9 @@
 	switch (id) {
 	case TPS65910_REG_VDD1:
 	case TPS65910_REG_VDD2:
-		mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		volt = VDD1_2_MIN_VOLT +
-				(selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET;
+				(selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET;
 		break;
 	case TPS65911_REG_VDDCTRL:
 		volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET);
@@ -947,6 +947,8 @@
 
 		if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) {
 			pmic->desc[i].ops = &tps65910_ops_dcdc;
+			pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE *
+							VDD1_2_NUM_VOLT_COARSE;
 		} else if (i == TPS65910_REG_VDD3) {
 			if (tps65910_chip_id(tps65910) == TPS65910)
 				pmic->desc[i].ops = &tps65910_ops_vdd3;
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index ee8747f..11cc308 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -71,6 +71,7 @@
 #define VREG_TYPE		1
 #define VREG_REMAP		2
 #define VREG_DEDICATED		3	/* LDO control */
+#define VREG_VOLTAGE_SMPS_4030	9
 /* TWL6030 register offsets */
 #define VREG_TRANS		1
 #define VREG_STATE		2
@@ -514,6 +515,32 @@
 	.get_status	= twl4030reg_get_status,
 };
 
+static int
+twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
+			unsigned *selector)
+{
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
+	int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
+
+	twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030,
+		vsel);
+	return 0;
+}
+
+static int twl4030smps_get_voltage(struct regulator_dev *rdev)
+{
+	struct twlreg_info *info = rdev_get_drvdata(rdev);
+	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+		VREG_VOLTAGE_SMPS_4030);
+
+	return vsel * 12500 + 600000;
+}
+
+static struct regulator_ops twl4030smps_ops = {
+	.set_voltage	= twl4030smps_set_voltage,
+	.get_voltage	= twl4030smps_get_voltage,
+};
+
 static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -856,6 +883,21 @@
 		}, \
 	}
 
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+	{ \
+	.base = offset, \
+	.id = num, \
+	.delay = turnon_delay, \
+	.remap = remap_conf, \
+	.desc = { \
+		.name = #label, \
+		.id = TWL4030_REG_##label, \
+		.ops = &twl4030smps_ops, \
+		.type = REGULATOR_VOLTAGE, \
+		.owner = THIS_MODULE, \
+		}, \
+	}
+
 #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \
 	.base = offset, \
 	.min_mV = min_mVolts, \
@@ -947,8 +989,8 @@
 	TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08),
 	TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08),
 	TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08),
-	TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08),
-	TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08),
+	TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08),
+	TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08),
 	TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08),
 	TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08),
 	TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
index 9d5ba93..fc66551 100644
--- a/drivers/regulator/userspace-consumer.c
+++ b/drivers/regulator/userspace-consumer.c
@@ -18,6 +18,7 @@
 
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/userspace-consumer.h>
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 69e550f..858c1f8 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct virtual_consumer_data {
 	struct mutex lock;
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 0f12c70..71632dd 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -15,6 +15,7 @@
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/wm8400-private.h>
 
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 44e91e5..8e28625 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -13,6 +13,7 @@
 
 #include <linux/rtc.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/log2.h>
 #include <linux/workqueue.h>
 
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
index 58d4e18..2322c43 100644
--- a/drivers/rtc/rtc-dm355evm.c
+++ b/drivers/rtc/rtc-dm355evm.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <linux/i2c/dm355evm_msp.h>
+#include <linux/module.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 57fbcc1..3a33b1f 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -17,6 +17,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ds1305.h>
+#include <linux/module.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index 568ad30..586c244 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -23,6 +23,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.6"
 
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index fee41b9..1350029 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -18,6 +18,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.3"
 
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c
index 06dfb54..a319402 100644
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@@ -11,6 +11,7 @@
 
 #include <linux/i2c.h>
 #include <linux/rtc.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.4"
 
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index d84a448d..e3e0f92 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -21,6 +21,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.4"
 
diff --git a/drivers/rtc/rtc-em3027.c b/drivers/rtc/rtc-em3027.c
index d8e1c25..8414dea 100644
--- a/drivers/rtc/rtc-em3027.c
+++ b/drivers/rtc/rtc-em3027.c
@@ -14,6 +14,7 @@
 #include <linux/i2c.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/module.h>
 
 /* Registers */
 #define EM3027_REG_ON_OFF_CTRL	0x00
diff --git a/drivers/rtc/rtc-isl12022.c b/drivers/rtc/rtc-isl12022.c
index ddbc797..6186833 100644
--- a/drivers/rtc/rtc-isl12022.c
+++ b/drivers/rtc/rtc-isl12022.c
@@ -15,6 +15,7 @@
 #include <linux/bcd.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.1"
 
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index d335448..bb21f44 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -76,12 +76,15 @@
 /*
  * rtc_time's year contains the increment over 1900, but vRTC's YEAR
  * register can't be programmed to value larger than 0x64, so vRTC
- * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * driver chose to use 1972 (1970 is UNIX time start point) as the base,
  * and does the translation at read/write time.
  *
- * Why not just use 1970 as the offset? it's because using 1960 will
+ * Why not just use 1970 as the offset? it's because using 1972 will
  * make it consistent in leap year setting for both vrtc and low-level
- * physical rtc devices.
+ * physical rtc devices. Then why not use 1960 as the offset? If we use
+ * 1960, for a device's first use, its YEAR register is 0 and the system
+ * year will be parsed as 1960 which is not a valid UNIX time and will
+ * cause many applications to fail mysteriously.
  */
 static int mrst_read_time(struct device *dev, struct rtc_time *time)
 {
@@ -99,10 +102,10 @@
 	time->tm_year = vrtc_cmos_read(RTC_YEAR);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	/* Adjust for the 1960/1900 */
-	time->tm_year += 60;
+	/* Adjust for the 1972/1900 */
+	time->tm_year += 72;
 	time->tm_mon--;
-	return RTC_24H;
+	return rtc_valid_tm(time);
 }
 
 static int mrst_set_time(struct device *dev, struct rtc_time *time)
@@ -119,9 +122,9 @@
 	min = time->tm_min;
 	sec = time->tm_sec;
 
-	if (yrs < 70 || yrs > 138)
+	if (yrs < 72 || yrs > 138)
 		return -EINVAL;
-	yrs -= 60;
+	yrs -= 72;
 
 	spin_lock_irqsave(&rtc_lock, flags);
 
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 60627a7..768e2ed 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
+#include <linux/module.h>
 
 
 #define RTC_TIME_REG_OFFS	0
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index 71bab0e..2ee3bbf 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -42,6 +42,7 @@
 #include <linux/slab.h>
 #include <linux/rtc.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.6"
 
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index b42c0c6..606fdfa 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -18,6 +18,7 @@
 #include <linux/bcd.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.4.3"
 
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
index b3eba3c..e4b6880 100644
--- a/drivers/rtc/rtc-puv3.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -220,7 +220,7 @@
 	}
 }
 
-static int puv3_rtc_remove(struct platform_device *dev)
+static int __devexit puv3_rtc_remove(struct platform_device *dev)
 {
 	struct rtc_device *rtc = platform_get_drvdata(dev);
 
@@ -236,7 +236,7 @@
 	return 0;
 }
 
-static int puv3_rtc_probe(struct platform_device *pdev)
+static int __devinit puv3_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct resource *res;
diff --git a/drivers/rtc/rtc-rs5c348.c b/drivers/rtc/rtc-rs5c348.c
index 368d0e6..971bc8e 100644
--- a/drivers/rtc/rtc-rs5c348.c
+++ b/drivers/rtc/rtc-rs5c348.c
@@ -23,6 +23,7 @@
 #include <linux/rtc.h>
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.2"
 
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 85c1b84..d29f543 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -14,6 +14,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.6"
 
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index 3b94367..ed3e9b5 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -21,6 +21,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "0.1"
 
diff --git a/drivers/rtc/rtc-tx4939.c b/drivers/rtc/rtc-tx4939.c
index ec6313d..aac0ffe 100644
--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -11,6 +11,7 @@
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
 #include <asm/txx9/tx4939.h>
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index b00aad2..8c051d3 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -21,6 +21,7 @@
 #include <linux/bcd.h>
 #include <linux/rtc.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #define DRV_VERSION "1.0.8"
 
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 9b43ae9..a5a55da2 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -27,7 +27,7 @@
 
 static int dcssblk_open(struct block_device *bdev, fmode_t mode);
 static int dcssblk_release(struct gendisk *disk, fmode_t mode);
-static int dcssblk_make_request(struct request_queue *q, struct bio *bio);
+static void dcssblk_make_request(struct request_queue *q, struct bio *bio);
 static int dcssblk_direct_access(struct block_device *bdev, sector_t secnum,
 				 void **kaddr, unsigned long *pfn);
 
@@ -814,7 +814,7 @@
 	return rc;
 }
 
-static int
+static void
 dcssblk_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct dcssblk_dev_info *dev_info;
@@ -871,10 +871,9 @@
 		bytes_done += bvec->bv_len;
 	}
 	bio_endio(bio, 0);
-	return 0;
+	return;
 fail:
 	bio_io_error(bio);
-	return 0;
 }
 
 static int
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 1f6a4d8..98f3e4a 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -181,7 +181,7 @@
 /*
  * Block device make request function.
  */
-static int xpram_make_request(struct request_queue *q, struct bio *bio)
+static void xpram_make_request(struct request_queue *q, struct bio *bio)
 {
 	xpram_device_t *xdev = bio->bi_bdev->bd_disk->private_data;
 	struct bio_vec *bvec;
@@ -221,10 +221,9 @@
 	}
 	set_bit(BIO_UPTODATE, &bio->bi_flags);
 	bio_endio(bio, 0);
-	return 0;
+	return;
 fail:
 	bio_io_error(bio);
-	return 0;
 }
 
 static int xpram_getgeo(struct block_device *bdev, struct hd_geometry *geo)
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index f6489eb..e712981 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -11,6 +11,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/types.h>
diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c
index 4a51e3f..bd1b9c9 100644
--- a/drivers/s390/char/sclp_cpi_sys.c
+++ b/drivers/s390/char/sclp_cpi_sys.c
@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/completion.h>
+#include <linux/export.h>
 #include <asm/ebcdic.h>
 #include <asm/sclp.h>
 
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index 31a3ccb..75bde6a 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/compat.h>
 #include <asm/cpcmd.h>
 #include <asm/debug.h>
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index d291a54..85f4a9a 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -13,6 +13,7 @@
 
 #include <linux/cdev.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/cio.h>
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 43068fb..1b6d924 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -641,6 +641,8 @@
 
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return -ENODATA;
+	if (OLDMEM_BASE)
+		return -ENODATA;
 
 	zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long));
 	debug_register_view(zcore_dbf, &debug_sprintf_view);
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 2d32233..e792436 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -10,6 +10,8 @@
 #include <linux/bug.h>
 #include <linux/workqueue.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/wait.h>
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index ed68245..29021f4 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -7,6 +7,8 @@
  */
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/export.h>
 #include <asm/debug.h>
 #include "qdio_debug.h"
 #include "qdio.h"
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index d9a46a4..2acc01f 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -8,6 +8,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <asm/qdio.h>
 
 #include "cio.h"
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index b77ae51..ec94f04 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1271,18 +1271,16 @@
 }
 
 /**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * __ap_schedule_poll_timer(): Schedule poll timer.
  *
  * Set up the timer to run the poll tasklet
  */
-static inline void ap_schedule_poll_timer(void)
+static inline void __ap_schedule_poll_timer(void)
 {
 	ktime_t hr_time;
 
 	spin_lock_bh(&ap_poll_timer_lock);
-	if (ap_using_interrupts() || ap_suspend_flag)
-		goto out;
-	if (hrtimer_is_queued(&ap_poll_timer))
+	if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag)
 		goto out;
 	if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
 		hr_time = ktime_set(0, poll_timeout);
@@ -1294,6 +1292,18 @@
 }
 
 /**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+	if (ap_using_interrupts())
+		return;
+	__ap_schedule_poll_timer();
+}
+
+/**
  * ap_poll_read(): Receive pending reply messages from an AP device.
  * @ap_dev: pointer to the AP device
  * @flags: pointer to control flags, bit 2^0 is set if another poll is
@@ -1374,8 +1384,9 @@
 			*flags |= 1;
 		*flags |= 2;
 		break;
-	case AP_RESPONSE_Q_FULL:
 	case AP_RESPONSE_RESET_IN_PROGRESS:
+		__ap_schedule_poll_timer();
+	case AP_RESPONSE_Q_FULL:
 		*flags |= 2;
 		break;
 	case AP_RESPONSE_MESSAGE_TOO_BIG:
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 3c2c923..94f49ff 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -20,6 +20,7 @@
 #include <linux/virtio_console.h>
 #include <linux/interrupt.h>
 #include <linux/virtio_ring.h>
+#include <linux/export.h>
 #include <linux/pfn.h>
 #include <asm/io.h>
 #include <asm/kvm_para.h>
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index fa80ba1..9b66d2d 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -4,7 +4,7 @@
 config LCS
 	def_tristate m
 	prompt "Lan Channel Station Interface"
-	depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
+	depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI)
 	help
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index c28713d..863fc21 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -50,7 +50,7 @@
 #include "lcs.h"
 
 
-#if !defined(CONFIG_NET_ETHERNET) && \
+#if !defined(CONFIG_ETHERNET) && \
     !defined(CONFIG_TR) && !defined(CONFIG_FDDI)
 #error Cannot compile lcs.c without some net devices switched on.
 #endif
@@ -1634,7 +1634,7 @@
 	int rc;
 
 	LCS_DBF_TEXT(2, trace, "strtauto");
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
 	card->lan_type = LCS_FRAME_TYPE_ENET;
 	rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
 	if (rc == 0)
@@ -2166,7 +2166,7 @@
 		goto netdev_out;
 	}
 	switch (card->lan_type) {
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
 	case LCS_FRAME_TYPE_ENET:
 		card->lan_type_trans = eth_type_trans;
 		dev = alloc_etherdev(0);
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 3251333..b6a6356 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1994,6 +1994,8 @@
 			   netiucv_setup_netdevice);
 	if (!dev)
 		return NULL;
+	if (dev_alloc_name(dev, dev->name) < 0)
+		goto out_netdev;
 
 	privptr = netdev_priv(dev);
 	privptr->fsm = init_fsm("netiucvdev", dev_state_names,
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index b77c65e..4abc79d 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -236,8 +236,7 @@
 #define QETH_IN_BUF_COUNT_MAX 128
 #define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12)
 #define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \
-		((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \
-		 ((card)->qdio.in_buf_pool.buf_count / 2))
+		 ((card)->qdio.in_buf_pool.buf_count / 2)
 
 /* buffers we have to be behind before we get a PCI */
 #define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 8153443..fff57de 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -881,7 +881,6 @@
 void qeth_schedule_recovery(struct qeth_card *card)
 {
 	QETH_CARD_TEXT(card, 2, "startrec");
-	WARN_ON(1);
 	if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0)
 		schedule_work(&card->kernel_thread_starter);
 }
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index e4c1176..4d5307d 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2756,11 +2756,13 @@
 	struct neighbour *n = NULL;
 	struct dst_entry *dst;
 
+	rcu_read_lock();
 	dst = skb_dst(skb);
 	if (dst)
 		n = dst_get_neighbour(dst);
 	if (n) {
 		cast_type = n->type;
+		rcu_read_unlock();
 		if ((cast_type == RTN_BROADCAST) ||
 		    (cast_type == RTN_MULTICAST) ||
 		    (cast_type == RTN_ANYCAST))
@@ -2768,6 +2770,8 @@
 		else
 			return RTN_UNSPEC;
 	}
+	rcu_read_unlock();
+
 	/* try something else */
 	if (skb->protocol == ETH_P_IPV6)
 		return (skb_network_header(skb)[24] == 0xff) ?
@@ -2847,6 +2851,8 @@
 	}
 
 	hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr);
+
+	rcu_read_lock();
 	dst = skb_dst(skb);
 	if (dst)
 		n = dst_get_neighbour(dst);
@@ -2893,6 +2899,7 @@
 				QETH_CAST_UNICAST | QETH_HDR_PASSTHRU;
 		}
 	}
+	rcu_read_unlock();
 }
 
 static inline void qeth_l3_hdr_csum(struct qeth_card *card,
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 0ea2fbf..d979bb2 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -335,10 +335,10 @@
 					QETH_IN_BUF_COUNT_MAX)
 				qeth_realloc_buffer_pool(card,
 					QETH_IN_BUF_COUNT_MAX);
-			break;
 		} else
 			rc = -EPERM;
-	default:   /* fall through */
+		break;
+	default:
 		rc = -EINVAL;
 	}
 out:
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 645b0fc..0860181 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -31,6 +31,7 @@
 #include <linux/miscdevice.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "zfcp_ext.h"
 #include "zfcp_fc.h"
 #include "zfcp_reqlist.h"
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index e8b7cee..96f13ad8 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -9,6 +9,7 @@
 #define KMSG_COMPONENT "zfcp"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/module.h>
 #include "zfcp_ext.h"
 #include "zfcp_reqlist.h"
 
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 967e7b7..a9a816e 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -9,6 +9,7 @@
 #define KMSG_COMPONENT "zfcp"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/module.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <asm/debug.h>
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index df9e69f..e14da57 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -10,6 +10,7 @@
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "zfcp_ext.h"
 #include "zfcp_qdio.h"
 
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 09126a9..11f07f8 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -9,6 +9,7 @@
 #define KMSG_COMPONENT "zfcp"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <scsi/fc/fc_fcp.h>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index aa573c3..06ea3bc 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -617,20 +617,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
-config SCSI_ARCMSR_AER
-	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
-	depends on SCSI_ARCMSR && PCIEAER
-	default n
-	help
-	  The advanced error reporting(AER) capability is "NOT" provided by
-	  ARC1200/1201/1202 SATA RAID controllers cards.
-	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
-	  If your card is other models, you could pick it
-	  on condition that the kernel version is greater than 2.6.19.
-	  This function is maintained driver by Nick Cheng. If you have any
-	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
-	  To enable this function, choose Y here.
-
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"
 
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 1bb5d3f..79a3063 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -5,6 +5,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/zorro.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index d946802..e29fe0e 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 0619957..409f580 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -34,6 +34,7 @@
 #include <linux/blkdev.h>
 #include <asm/uaccess.h>
 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
+#include <linux/module.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 4aa76d6..705e13e 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
@@ -1109,6 +1110,9 @@
 		unique_id++;
 	}
 
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+			       PCIE_LINK_STATE_CLKPM);
+
 	error = pci_enable_device(pdev);
 	if (error)
 		goto out;
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 7b0a8ab..379c696 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/semaphore.h>
 #include <linux/iscsi_boot_sysfs.h>
+#include <linux/module.h>
 
 #include <scsi/libiscsi.h>
 #include <scsi/scsi_transport_iscsi.h>
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index b412e03..dee1a09 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/debugfs.h>
+#include <linux/export.h>
 
 #include "bfad_drv.h"
 #include "bfad_im.h"
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 0131238..e5db649 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -19,6 +19,8 @@
  *  bfad_im.c Linux driver IM module.
  */
 
+#include <linux/export.h>
+
 #include "bfad_drv.h"
 #include "bfad_im.h"
 #include "bfa_fcs.h"
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 63de1c7..049ea90 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -62,7 +62,7 @@
 #include "bnx2fc_constants.h"
 
 #define BNX2FC_NAME		"bnx2fc"
-#define BNX2FC_VERSION		"1.0.8"
+#define BNX2FC_VERSION		"1.0.9"
 
 #define PFX			"bnx2fc: "
 
@@ -145,6 +145,9 @@
 #define REC_RETRY_COUNT			1
 #define BNX2FC_NUM_ERR_BITS		63
 
+#define BNX2FC_RELOGIN_WAIT_TIME	200
+#define BNX2FC_RELOGIN_WAIT_CNT		10
+
 /* bnx2fc driver uses only one instance of fcoe_percpu_s */
 extern struct fcoe_percpu_s bnx2fc_global;
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index fd382fe..ce0ce3e 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -268,17 +268,6 @@
 
 	orig_io_req = cb_arg->aborted_io_req;
 	srr_req = cb_arg->io_req;
-	if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) {
-		BNX2FC_IO_DBG(srr_req, "srr_compl: xid - 0x%x completed",
-			orig_io_req->xid);
-		goto srr_compl_done;
-	}
-	if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
-		BNX2FC_IO_DBG(srr_req, "rec abts in prog "
-		       "orig_io - 0x%x\n",
-			orig_io_req->xid);
-		goto srr_compl_done;
-	}
 	if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &srr_req->req_flags)) {
 		/* SRR timedout */
 		BNX2FC_IO_DBG(srr_req, "srr timed out, abort "
@@ -290,6 +279,12 @@
 				"failed. issue cleanup\n");
 			bnx2fc_initiate_cleanup(srr_req);
 		}
+		if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+		    test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+			BNX2FC_IO_DBG(srr_req, "srr_compl:xid 0x%x flags = %lx",
+				      orig_io_req->xid, orig_io_req->req_flags);
+			goto srr_compl_done;
+		}
 		orig_io_req->srr_retry++;
 		if (orig_io_req->srr_retry <= SRR_RETRY_COUNT) {
 			struct bnx2fc_rport *tgt = orig_io_req->tgt;
@@ -311,6 +306,12 @@
 		}
 		goto srr_compl_done;
 	}
+	if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) ||
+	    test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) {
+		BNX2FC_IO_DBG(srr_req, "srr_compl:xid - 0x%x flags = %lx",
+			      orig_io_req->xid, orig_io_req->req_flags);
+		goto srr_compl_done;
+	}
 	mp_req = &(srr_req->mp_req);
 	fc_hdr = &(mp_req->resp_fc_hdr);
 	resp_len = mp_req->resp_len;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 85bcc4b..8c6156a 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -22,7 +22,7 @@
 
 #define DRV_MODULE_NAME		"bnx2fc"
 #define DRV_MODULE_VERSION	BNX2FC_VERSION
-#define DRV_MODULE_RELDATE	"Oct 02, 2011"
+#define DRV_MODULE_RELDATE	"Oct 21, 2011"
 
 
 static char version[] __devinitdata =
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 0c64d18..84a78af 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1103,7 +1103,10 @@
 	struct fc_rport_libfc_priv *rp = rport->dd_data;
 	struct bnx2fc_cmd *io_req;
 	struct fc_lport *lport;
+	struct fc_rport_priv *rdata;
 	struct bnx2fc_rport *tgt;
+	int logo_issued;
+	int wait_cnt = 0;
 	int rc = FAILED;
 
 
@@ -1192,8 +1195,40 @@
 	} else {
 		printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
 				"already in abts processing\n", io_req->xid);
+		if (cancel_delayed_work(&io_req->timeout_work))
+			kref_put(&io_req->refcount,
+				 bnx2fc_cmd_release); /* drop timer hold */
+		bnx2fc_initiate_cleanup(io_req);
+
+		spin_unlock_bh(&tgt->tgt_lock);
+
+		wait_for_completion(&io_req->tm_done);
+
+		spin_lock_bh(&tgt->tgt_lock);
+		io_req->wait_for_comp = 0;
+		rdata = io_req->tgt->rdata;
+		logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO,
+					       &tgt->flags);
 		kref_put(&io_req->refcount, bnx2fc_cmd_release);
 		spin_unlock_bh(&tgt->tgt_lock);
+
+		if (!logo_issued) {
+			BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n",
+				      tgt->flags);
+			mutex_lock(&lport->disc.disc_mutex);
+			lport->tt.rport_logoff(rdata);
+			mutex_unlock(&lport->disc.disc_mutex);
+			do {
+				msleep(BNX2FC_RELOGIN_WAIT_TIME);
+				/*
+				 * If session not recovered, let SCSI-ml
+				 * escalate error recovery.
+				 */
+				if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT)
+					return FAILED;
+			} while (!test_bit(BNX2FC_FLAG_SESSION_READY,
+					   &tgt->flags));
+		}
 		return SUCCESS;
 	}
 	if (rc == FAILED) {
@@ -1275,6 +1310,8 @@
 		   io_req->refcount.refcount.counter, io_req->cmd_type);
 	bnx2fc_scsi_done(io_req, DID_ERROR);
 	kref_put(&io_req->refcount, bnx2fc_cmd_release);
+	if (io_req->wait_for_comp)
+		complete(&io_req->tm_done);
 }
 
 void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req,
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index c363a4b..c10f74a 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -25,6 +25,7 @@
 #include <net/dst.h>
 #include <net/route.h>
 #include <linux/inetdevice.h>	/* ip_dev_find */
+#include <linux/module.h>
 #include <net/tcp.h>
 
 static unsigned int dbg_level;
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 7c05fd9..23149b9 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <scsi/scsi_dh.h>
 #include "../scsi_priv.h"
 
@@ -441,7 +442,15 @@
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	sdev = q->queuedata;
-	if (sdev && sdev->scsi_dh_data)
+	if (!sdev) {
+		spin_unlock_irqrestore(q->queue_lock, flags);
+		err = SCSI_DH_NOSYS;
+		if (fn)
+			fn(data, err);
+		return err;
+	}
+
+	if (sdev->scsi_dh_data)
 		scsi_dh = sdev->scsi_dh_data->scsi_dh;
 	dev = get_device(&sdev->sdev_gendev);
 	if (!scsi_dh || !dev ||
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 627f4b5..4ef0212 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -21,6 +21,7 @@
  */
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
@@ -507,7 +508,7 @@
 	int len, k, off, valid_states = 0;
 	unsigned char *ucp;
 	unsigned err;
-	unsigned long expiry, interval = 1;
+	unsigned long expiry, interval = 1000;
 
 	expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT);
  retry:
@@ -734,6 +735,7 @@
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	sdev->scsi_dh_data = scsi_dh_data;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);
 
 	return 0;
 
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 48441f6..591186c 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -21,6 +21,7 @@
  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index b479f1e..0f86a18 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 82d612f..1d31279 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -24,6 +24,7 @@
 #include <scsi/scsi_dh.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define RDAC_NAME "rdac"
 #define RDAC_RETRY_COUNT 5
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 61384ee4..cefbe44 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2347,14 +2347,11 @@
 		goto done;
 
 	mac = fr_cb(fp)->granted_mac;
-	if (is_zero_ether_addr(mac)) {
-		/* pre-FIP */
-		if (fcoe_ctlr_recv_flogi(fip, lport, fp)) {
-			fc_frame_free(fp);
-			return;
-		}
-	}
-	fcoe_update_src_mac(lport, mac);
+	/* pre-FIP */
+	if (is_zero_ether_addr(mac))
+		fcoe_ctlr_recv_flogi(fip, lport, fp);
+	if (!is_zero_ether_addr(mac))
+		fcoe_update_src_mac(lport, mac);
 done:
 	fc_lport_flogi_resp(seq, fp, lport);
 }
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 50bb541..488fbc6 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -5,6 +5,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/zorro.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 4f7a582..351dc0b 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -286,6 +286,7 @@
 {
 	struct Scsi_Host *shost = dev_to_shost(dev);
 	struct device *parent = dev->parent;
+	struct request_queue *q;
 
 	scsi_proc_hostdir_rm(shost->hostt);
 
@@ -293,9 +294,11 @@
 		kthread_stop(shost->ehandler);
 	if (shost->work_q)
 		destroy_workqueue(shost->work_q);
-	if (shost->uspace_req_q) {
-		kfree(shost->uspace_req_q->queuedata);
-		scsi_free_queue(shost->uspace_req_q);
+	q = shost->uspace_req_q;
+	if (q) {
+		kfree(q->queuedata);
+		q->queuedata = NULL;
+		scsi_free_queue(q);
 	}
 
 	scsi_destroy_command_freelist(shost);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9825ecf..865d452 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -48,6 +49,7 @@
 #include <linux/bitmap.h>
 #include <linux/atomic.h>
 #include <linux/kthread.h>
+#include <linux/jiffies.h>
 #include "hpsa_cmd.h"
 #include "hpsa.h"
 
@@ -127,6 +129,10 @@
 
 static int number_of_controllers;
 
+static struct list_head hpsa_ctlr_list = LIST_HEAD_INIT(hpsa_ctlr_list);
+static spinlock_t lockup_detector_lock;
+static struct task_struct *hpsa_lockup_detector;
+
 static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
 static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
 static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
@@ -484,6 +490,7 @@
 #endif
 	.sdev_attrs = hpsa_sdev_attrs,
 	.shost_attrs = hpsa_shost_attrs,
+	.max_sectors = 8192,
 };
 
 
@@ -566,16 +573,16 @@
 	 * assumes h->devlock is held
 	 */
 	int i, found = 0;
-	DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA);
+	DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES);
 
-	memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3);
+	memset(&lun_taken[0], 0, HPSA_MAX_DEVICES >> 3);
 
 	for (i = 0; i < h->ndevices; i++) {
 		if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
 			set_bit(h->dev[i]->target, lun_taken);
 	}
 
-	for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) {
+	for (i = 0; i < HPSA_MAX_DEVICES; i++) {
 		if (!test_bit(i, lun_taken)) {
 			/* *bus = 1; */
 			*target = i;
@@ -598,7 +605,7 @@
 	unsigned char addr1[8], addr2[8];
 	struct hpsa_scsi_dev_t *sd;
 
-	if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) {
+	if (n >= HPSA_MAX_DEVICES) {
 		dev_err(&h->pdev->dev, "too many devices, some will be "
 			"inaccessible.\n");
 		return -1;
@@ -673,7 +680,7 @@
 	struct hpsa_scsi_dev_t *removed[], int *nremoved)
 {
 	/* assumes h->devlock is held */
-	BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+	BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
 	removed[*nremoved] = h->dev[entry];
 	(*nremoved)++;
 
@@ -702,7 +709,7 @@
 	int i;
 	struct hpsa_scsi_dev_t *sd;
 
-	BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
+	BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
 
 	sd = h->dev[entry];
 	removed[*nremoved] = h->dev[entry];
@@ -814,10 +821,8 @@
 	int nadded, nremoved;
 	struct Scsi_Host *sh = NULL;
 
-	added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA,
-		GFP_KERNEL);
-	removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA,
-		GFP_KERNEL);
+	added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
+	removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
 
 	if (!added || !removed) {
 		dev_warn(&h->pdev->dev, "out of memory in "
@@ -1338,6 +1343,22 @@
 	wait_for_completion(&wait);
 }
 
+static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h,
+	struct CommandList *c)
+{
+	unsigned long flags;
+
+	/* If controller lockup detected, fake a hardware error. */
+	spin_lock_irqsave(&h->lock, flags);
+	if (unlikely(h->lockup_detected)) {
+		spin_unlock_irqrestore(&h->lock, flags);
+		c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+	} else {
+		spin_unlock_irqrestore(&h->lock, flags);
+		hpsa_scsi_do_simple_cmd_core(h, c);
+	}
+}
+
 static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
 	struct CommandList *c, int data_direction)
 {
@@ -1735,7 +1756,6 @@
 	if (is_scsi_rev_5(h))
 		return 0; /* p1210m doesn't need to do this. */
 
-#define MAX_MSA2XXX_ENCLOSURES 32
 	if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
 		dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
 			"enclosures exceeded.  Check your hardware "
@@ -1846,8 +1866,7 @@
 	int raid_ctlr_position;
 	DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
 
-	currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA,
-		GFP_KERNEL);
+	currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
 	physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
 	logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
@@ -1870,6 +1889,13 @@
 
 	/* Allocate the per device structures */
 	for (i = 0; i < ndevs_to_allocate; i++) {
+		if (i >= HPSA_MAX_DEVICES) {
+			dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded."
+				"  %d devices ignored.\n", HPSA_MAX_DEVICES,
+				ndevs_to_allocate - HPSA_MAX_DEVICES);
+			break;
+		}
+
 		currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL);
 		if (!currentsd[i]) {
 			dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
@@ -1956,7 +1982,7 @@
 		default:
 			break;
 		}
-		if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA)
+		if (ncurrent >= HPSA_MAX_DEVICES)
 			break;
 	}
 	adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
@@ -2048,8 +2074,14 @@
 	}
 	memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
 
-	/* Need a lock as this is being allocated from the pool */
 	spin_lock_irqsave(&h->lock, flags);
+	if (unlikely(h->lockup_detected)) {
+		spin_unlock_irqrestore(&h->lock, flags);
+		cmd->result = DID_ERROR << 16;
+		done(cmd);
+		return 0;
+	}
+	/* Need a lock as this is being allocated from the pool */
 	c = cmd_alloc(h);
 	spin_unlock_irqrestore(&h->lock, flags);
 	if (c == NULL) {			/* trouble... */
@@ -2601,7 +2633,7 @@
 		c->SG[0].Len = iocommand.buf_size;
 		c->SG[0].Ext = 0; /* we are not chaining*/
 	}
-	hpsa_scsi_do_simple_cmd_core(h, c);
+	hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
 	if (iocommand.buf_size > 0)
 		hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
 	check_ioctl_unit_attention(h, c);
@@ -2724,7 +2756,7 @@
 			c->SG[i].Ext = 0;
 		}
 	}
-	hpsa_scsi_do_simple_cmd_core(h, c);
+	hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
 	if (sg_used)
 		hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
 	check_ioctl_unit_attention(h, c);
@@ -2872,6 +2904,8 @@
 			c->Request.Timeout = 0;
 			c->Request.CDB[0] = BMIC_WRITE;
 			c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+			c->Request.CDB[7] = (size >> 8) & 0xFF;
+			c->Request.CDB[8] = size & 0xFF;
 			break;
 		case TEST_UNIT_READY:
 			c->Request.CDBLen = 6;
@@ -3091,6 +3125,7 @@
 	if (interrupt_not_for_us(h))
 		return IRQ_NONE;
 	spin_lock_irqsave(&h->lock, flags);
+	h->last_intr_timestamp = get_jiffies_64();
 	while (interrupt_pending(h)) {
 		raw_tag = get_next_completion(h);
 		while (raw_tag != FIFO_EMPTY)
@@ -3110,6 +3145,7 @@
 		return IRQ_NONE;
 
 	spin_lock_irqsave(&h->lock, flags);
+	h->last_intr_timestamp = get_jiffies_64();
 	raw_tag = get_next_completion(h);
 	while (raw_tag != FIFO_EMPTY)
 		raw_tag = next_command(h);
@@ -3126,6 +3162,7 @@
 	if (interrupt_not_for_us(h))
 		return IRQ_NONE;
 	spin_lock_irqsave(&h->lock, flags);
+	h->last_intr_timestamp = get_jiffies_64();
 	while (interrupt_pending(h)) {
 		raw_tag = get_next_completion(h);
 		while (raw_tag != FIFO_EMPTY) {
@@ -3146,6 +3183,7 @@
 	u32 raw_tag;
 
 	spin_lock_irqsave(&h->lock, flags);
+	h->last_intr_timestamp = get_jiffies_64();
 	raw_tag = get_next_completion(h);
 	while (raw_tag != FIFO_EMPTY) {
 		if (hpsa_tag_contains_index(raw_tag))
@@ -3300,6 +3338,13 @@
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= PCI_D0;
 		pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+		/*
+		 * The P600 requires a small delay when changing states.
+		 * Otherwise we may think the board did not reset and we bail.
+		 * This for kdump only and is particular to the P600.
+		 */
+		msleep(500);
 	}
 	return 0;
 }
@@ -3878,6 +3923,10 @@
 		dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
 		return -ENODEV;
 	}
+
+	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+			       PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
 	err = pci_enable_device(h->pdev);
 	if (err) {
 		dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
@@ -4083,6 +4132,149 @@
 	kfree(h);
 }
 
+static void remove_ctlr_from_lockup_detector_list(struct ctlr_info *h)
+{
+	assert_spin_locked(&lockup_detector_lock);
+	if (!hpsa_lockup_detector)
+		return;
+	if (h->lockup_detected)
+		return; /* already stopped the lockup detector */
+	list_del(&h->lockup_list);
+}
+
+/* Called when controller lockup detected. */
+static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list)
+{
+	struct CommandList *c = NULL;
+
+	assert_spin_locked(&h->lock);
+	/* Mark all outstanding commands as failed and complete them. */
+	while (!list_empty(list)) {
+		c = list_entry(list->next, struct CommandList, list);
+		c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+		finish_cmd(c, c->Header.Tag.lower);
+	}
+}
+
+static void controller_lockup_detected(struct ctlr_info *h)
+{
+	unsigned long flags;
+
+	assert_spin_locked(&lockup_detector_lock);
+	remove_ctlr_from_lockup_detector_list(h);
+	h->access.set_intr_mask(h, HPSA_INTR_OFF);
+	spin_lock_irqsave(&h->lock, flags);
+	h->lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+	spin_unlock_irqrestore(&h->lock, flags);
+	dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
+			h->lockup_detected);
+	pci_disable_device(h->pdev);
+	spin_lock_irqsave(&h->lock, flags);
+	fail_all_cmds_on_list(h, &h->cmpQ);
+	fail_all_cmds_on_list(h, &h->reqQ);
+	spin_unlock_irqrestore(&h->lock, flags);
+}
+
+#define HEARTBEAT_SAMPLE_INTERVAL (10 * HZ)
+#define HEARTBEAT_CHECK_MINIMUM_INTERVAL (HEARTBEAT_SAMPLE_INTERVAL / 2)
+
+static void detect_controller_lockup(struct ctlr_info *h)
+{
+	u64 now;
+	u32 heartbeat;
+	unsigned long flags;
+
+	assert_spin_locked(&lockup_detector_lock);
+	now = get_jiffies_64();
+	/* If we've received an interrupt recently, we're ok. */
+	if (time_after64(h->last_intr_timestamp +
+				(HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+		return;
+
+	/*
+	 * If we've already checked the heartbeat recently, we're ok.
+	 * This could happen if someone sends us a signal. We
+	 * otherwise don't care about signals in this thread.
+	 */
+	if (time_after64(h->last_heartbeat_timestamp +
+				(HEARTBEAT_CHECK_MINIMUM_INTERVAL), now))
+		return;
+
+	/* If heartbeat has not changed since we last looked, we're not ok. */
+	spin_lock_irqsave(&h->lock, flags);
+	heartbeat = readl(&h->cfgtable->HeartBeat);
+	spin_unlock_irqrestore(&h->lock, flags);
+	if (h->last_heartbeat == heartbeat) {
+		controller_lockup_detected(h);
+		return;
+	}
+
+	/* We're ok. */
+	h->last_heartbeat = heartbeat;
+	h->last_heartbeat_timestamp = now;
+}
+
+static int detect_controller_lockup_thread(void *notused)
+{
+	struct ctlr_info *h;
+	unsigned long flags;
+
+	while (1) {
+		struct list_head *this, *tmp;
+
+		schedule_timeout_interruptible(HEARTBEAT_SAMPLE_INTERVAL);
+		if (kthread_should_stop())
+			break;
+		spin_lock_irqsave(&lockup_detector_lock, flags);
+		list_for_each_safe(this, tmp, &hpsa_ctlr_list) {
+			h = list_entry(this, struct ctlr_info, lockup_list);
+			detect_controller_lockup(h);
+		}
+		spin_unlock_irqrestore(&lockup_detector_lock, flags);
+	}
+	return 0;
+}
+
+static void add_ctlr_to_lockup_detector_list(struct ctlr_info *h)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lockup_detector_lock, flags);
+	list_add_tail(&h->lockup_list, &hpsa_ctlr_list);
+	spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
+static void start_controller_lockup_detector(struct ctlr_info *h)
+{
+	/* Start the lockup detector thread if not already started */
+	if (!hpsa_lockup_detector) {
+		spin_lock_init(&lockup_detector_lock);
+		hpsa_lockup_detector =
+			kthread_run(detect_controller_lockup_thread,
+						NULL, "hpsa");
+	}
+	if (!hpsa_lockup_detector) {
+		dev_warn(&h->pdev->dev,
+			"Could not start lockup detector thread\n");
+		return;
+	}
+	add_ctlr_to_lockup_detector_list(h);
+}
+
+static void stop_controller_lockup_detector(struct ctlr_info *h)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lockup_detector_lock, flags);
+	remove_ctlr_from_lockup_detector_list(h);
+	/* If the list of ctlr's to monitor is empty, stop the thread */
+	if (list_empty(&hpsa_ctlr_list)) {
+		kthread_stop(hpsa_lockup_detector);
+		hpsa_lockup_detector = NULL;
+	}
+	spin_unlock_irqrestore(&lockup_detector_lock, flags);
+}
+
 static int __devinit hpsa_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
 {
@@ -4120,7 +4312,6 @@
 		return -ENOMEM;
 
 	h->pdev = pdev;
-	h->busy_initializing = 1;
 	h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
 	INIT_LIST_HEAD(&h->cmpQ);
 	INIT_LIST_HEAD(&h->reqQ);
@@ -4229,7 +4420,7 @@
 
 	hpsa_hba_inquiry(h);
 	hpsa_register_scsi(h);	/* hook ourselves into SCSI subsystem */
-	h->busy_initializing = 0;
+	start_controller_lockup_detector(h);
 	return 1;
 
 clean4:
@@ -4238,7 +4429,6 @@
 	free_irq(h->intr[h->intr_mode], h);
 clean2:
 clean1:
-	h->busy_initializing = 0;
 	kfree(h);
 	return rc;
 }
@@ -4293,10 +4483,11 @@
 	struct ctlr_info *h;
 
 	if (pci_get_drvdata(pdev) == NULL) {
-		dev_err(&pdev->dev, "unable to remove device \n");
+		dev_err(&pdev->dev, "unable to remove device\n");
 		return;
 	}
 	h = pci_get_drvdata(pdev);
+	stop_controller_lockup_detector(h);
 	hpsa_unregister_scsi(h);	/* unhook from SCSI subsystem */
 	hpsa_shutdown(pdev);
 	iounmap(h->vaddr);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 7f53ceaa..91edafb 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -95,8 +95,6 @@
 	unsigned long  		*cmd_pool_bits;
 	int			nr_allocs;
 	int			nr_frees;
-	int			busy_initializing;
-	int			busy_scanning;
 	int			scan_finished;
 	spinlock_t		scan_lock;
 	wait_queue_head_t	scan_wait_queue;
@@ -104,8 +102,7 @@
 	struct Scsi_Host *scsi_host;
 	spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
 	int ndevices; /* number of used elements in .dev[] array. */
-#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
-	struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+	struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
 	/*
 	 * Performant mode tables.
 	 */
@@ -124,6 +121,11 @@
 	unsigned char reply_pool_wraparound;
 	u32 *blockFetchTable;
 	unsigned char *hba_inquiry_data;
+	u64 last_intr_timestamp;
+	u32 last_heartbeat;
+	u64 last_heartbeat_timestamp;
+	u32 lockup_detected;
+	struct list_head lockup_list;
 };
 #define HPSA_ABORT_MSG 0
 #define HPSA_DEVICE_RESET_MSG 1
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 55d741b..3fd4715 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -123,8 +123,11 @@
 
 /* FIXME this is a per controller value (barf!) */
 #define HPSA_MAX_TARGETS_PER_CTLR 16
-#define HPSA_MAX_LUN 256
+#define HPSA_MAX_LUN 1024
 #define HPSA_MAX_PHYS_LUN 1024
+#define MAX_MSA2XXX_ENCLOSURES 32
+#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
+	MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */
 
 /* SCSI-3 Commands */
 #pragma pack(1)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 73e24b4..fd860d9 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9123,6 +9123,8 @@
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 },
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 6d257e0..ac84736 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -82,6 +82,7 @@
 
 #define IPR_SUBS_DEV_ID_57B4    0x033B
 #define IPR_SUBS_DEV_ID_57B2    0x035F
+#define IPR_SUBS_DEV_ID_57C3    0x0353
 #define IPR_SUBS_DEV_ID_57C4    0x0354
 #define IPR_SUBS_DEV_ID_57C6    0x0357
 #define IPR_SUBS_DEV_ID_57CC    0x035C
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index f07f30f..e7fe9c4 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1350,7 +1350,7 @@
 	u->stp_max_occupancy_timeout = stp_max_occ_to;
 	u->ssp_max_occupancy_timeout = ssp_max_occ_to;
 	u->no_outbound_task_timeout = no_outbound_task_to;
-	u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+	u->max_concurr_spinup = max_concurr_spinup;
 }
 
 static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
@@ -1661,7 +1661,7 @@
 	ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
 
 	/* Default to APC mode. */
-	ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+	ihost->oem_parameters.controller.max_concurr_spin_up = 1;
 
 	/* Default to no SSC operation. */
 	ihost->oem_parameters.controller.do_enable_ssc = false;
@@ -1787,7 +1787,8 @@
 	} else
 		return -EINVAL;
 
-	if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+	if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+	    oem->controller.max_concurr_spin_up < 1)
 		return -EINVAL;
 
 	return 0;
@@ -1810,6 +1811,16 @@
 	return SCI_FAILURE_INVALID_STATE;
 }
 
+static u8 max_spin_up(struct isci_host *ihost)
+{
+	if (ihost->user_parameters.max_concurr_spinup)
+		return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+			     MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+	else
+		return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+			     MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
 static void power_control_timeout(unsigned long data)
 {
 	struct sci_timer *tmr = (struct sci_timer *)data;
@@ -1839,8 +1850,7 @@
 		if (iphy == NULL)
 			continue;
 
-		if (ihost->power_control.phys_granted_power >=
-		    ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+		if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
 			break;
 
 		ihost->power_control.requesters[i] = NULL;
@@ -1865,8 +1875,7 @@
 {
 	BUG_ON(iphy == NULL);
 
-	if (ihost->power_control.phys_granted_power <
-	    ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+	if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
 		ihost->power_control.phys_granted_power++;
 		sci_phy_consume_power_handler(iphy);
 
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 43fe840..a97edab 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -118,7 +118,7 @@
 module_param(phy_gen, byte, 0);
 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
 
-unsigned char max_concurr_spinup = 1;
+unsigned char max_concurr_spinup;
 module_param(max_concurr_spinup, byte, 0);
 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
 
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8e59c88..ac7f277 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -145,48 +145,15 @@
 	}
 }
 
-/* called under sci_lock to stabilize phy:port associations */
-void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport)
-{
-	int i;
-
-	clear_bit(IPORT_BCN_BLOCKED, &iport->flags);
-	wake_up(&ihost->eventq);
-
-	if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags))
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
-		struct isci_phy *iphy = iport->phy_table[i];
-
-		if (!iphy)
-			continue;
-
-		ihost->sas_ha.notify_port_event(&iphy->sas_phy,
-						PORTE_BROADCAST_RCVD);
-		break;
-	}
-}
-
 static void isci_port_bc_change_received(struct isci_host *ihost,
 					 struct isci_port *iport,
 					 struct isci_phy *iphy)
 {
-	if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) {
-		dev_dbg(&ihost->pdev->dev,
-			"%s: disabled BCN; isci_phy = %p, sas_phy = %p\n",
-			__func__, iphy, &iphy->sas_phy);
-		set_bit(IPORT_BCN_PENDING, &iport->flags);
-		atomic_inc(&iport->event);
-		wake_up(&ihost->eventq);
-	} else {
-		dev_dbg(&ihost->pdev->dev,
-			"%s: isci_phy = %p, sas_phy = %p\n",
-			__func__, iphy, &iphy->sas_phy);
+	dev_dbg(&ihost->pdev->dev,
+		"%s: isci_phy = %p, sas_phy = %p\n",
+		__func__, iphy, &iphy->sas_phy);
 
-		ihost->sas_ha.notify_port_event(&iphy->sas_phy,
-						PORTE_BROADCAST_RCVD);
-	}
+	ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
 	sci_port_bcn_enable(iport);
 }
 
@@ -278,9 +245,6 @@
 		/* check to see if this is the last phy on this port. */
 		if (isci_phy->sas_phy.port &&
 		    isci_phy->sas_phy.port->num_phys == 1) {
-			atomic_inc(&isci_port->event);
-			isci_port_bcn_enable(isci_host, isci_port);
-
 			/* change the state for all devices on this port.  The
 			 * next task sent to this device will be returned as
 			 * SAS_TASK_UNDELIVERED, and the scsi mid layer will
@@ -350,6 +314,34 @@
 	dev_dbg(&ihost->pdev->dev, "Port stop complete\n");
 }
 
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+	switch (state) {
+	case SCI_PORT_READY:
+	case SCI_PORT_SUB_WAITING:
+	case SCI_PORT_SUB_OPERATIONAL:
+	case SCI_PORT_SUB_CONFIGURING:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+				      enum sci_port_states state)
+{
+	struct sci_base_state_machine *sm = &iport->sm;
+	enum sci_port_states old_state = sm->current_state_id;
+
+	if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+		iport->ready_exit = true;
+
+	sci_change_state(sm, state);
+	iport->ready_exit = false;
+}
+
 /**
  * isci_port_hard_reset_complete() - This function is called by the sci core
  *    when the hard reset complete notification has been received.
@@ -368,6 +360,26 @@
 	/* Save the status of the hard reset from the port. */
 	isci_port->hard_reset_status = completion_status;
 
+	if (completion_status != SCI_SUCCESS) {
+
+		/* The reset failed.  The port state is now SCI_PORT_FAILED. */
+		if (isci_port->active_phy_mask == 0) {
+
+			/* Generate the link down now to the host, since it
+			 * was intercepted by the hard reset state machine when
+			 * it really happened.
+			 */
+			isci_port_link_down(isci_port->isci_host,
+					    &isci_port->isci_host->phys[
+						   isci_port->last_active_phy],
+					    isci_port);
+		}
+		/* Advance the port state so that link state changes will be
+		* noticed.
+		*/
+		port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
+
+	}
 	complete_all(&isci_port->hard_reset_complete);
 }
 
@@ -657,6 +669,8 @@
 	struct isci_host *ihost = iport->owning_controller;
 
 	iport->active_phy_mask &= ~(1 << iphy->phy_index);
+	if (!iport->active_phy_mask)
+		iport->last_active_phy = iphy->phy_index;
 
 	iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
 
@@ -683,33 +697,6 @@
 	}
 }
 
-static bool is_port_ready_state(enum sci_port_states state)
-{
-	switch (state) {
-	case SCI_PORT_READY:
-	case SCI_PORT_SUB_WAITING:
-	case SCI_PORT_SUB_OPERATIONAL:
-	case SCI_PORT_SUB_CONFIGURING:
-		return true;
-	default:
-		return false;
-	}
-}
-
-/* flag dummy rnc hanling when exiting a ready state */
-static void port_state_machine_change(struct isci_port *iport,
-				      enum sci_port_states state)
-{
-	struct sci_base_state_machine *sm = &iport->sm;
-	enum sci_port_states old_state = sm->current_state_id;
-
-	if (is_port_ready_state(old_state) && !is_port_ready_state(state))
-		iport->ready_exit = true;
-
-	sci_change_state(sm, state);
-	iport->ready_exit = false;
-}
-
 /**
  * sci_port_general_link_up_handler - phy can be assigned to port?
  * @sci_port: sci_port object for which has a phy that has gone link up.
@@ -1622,7 +1609,8 @@
 	iport->logical_port_index  = SCIC_SDS_DUMMY_PORT;
 	iport->physical_port_index = index;
 	iport->active_phy_mask     = 0;
-	iport->ready_exit	      = false;
+	iport->last_active_phy     = 0;
+	iport->ready_exit	   = false;
 
 	iport->owning_controller = ihost;
 
@@ -1648,7 +1636,6 @@
 	init_completion(&iport->start_complete);
 	iport->isci_host = ihost;
 	isci_port_change_state(iport, isci_freed);
-	atomic_set(&iport->event, 0);
 }
 
 /**
@@ -1676,7 +1663,7 @@
 {
 	unsigned long flags;
 	enum sci_status status;
-	int idx, ret = TMF_RESP_FUNC_COMPLETE;
+	int ret = TMF_RESP_FUNC_COMPLETE;
 
 	dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
 		__func__, iport);
@@ -1697,8 +1684,13 @@
 			"%s: iport = %p; hard reset completion\n",
 			__func__, iport);
 
-		if (iport->hard_reset_status != SCI_SUCCESS)
+		if (iport->hard_reset_status != SCI_SUCCESS) {
 			ret = TMF_RESP_FUNC_FAILED;
+
+			dev_err(&ihost->pdev->dev,
+				"%s: iport = %p; hard reset failed (0x%x)\n",
+				__func__, iport, iport->hard_reset_status);
+		}
 	} else {
 		ret = TMF_RESP_FUNC_FAILED;
 
@@ -1718,18 +1710,6 @@
 			"%s: iport = %p; hard reset failed "
 			"(0x%x) - driving explicit link fail for all phys\n",
 			__func__, iport, iport->hard_reset_status);
-
-		/* Down all phys in the port. */
-		spin_lock_irqsave(&ihost->scic_lock, flags);
-		for (idx = 0; idx < SCI_MAX_PHYS; ++idx) {
-			struct isci_phy *iphy = iport->phy_table[idx];
-
-			if (!iphy)
-				continue;
-			sci_phy_stop(iphy);
-			sci_phy_start(iphy);
-		}
-		spin_unlock_irqrestore(&ihost->scic_lock, flags);
 	}
 	return ret;
 }
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
index b50ecd4..cb5ffbc 100644
--- a/drivers/scsi/isci/port.h
+++ b/drivers/scsi/isci/port.h
@@ -77,7 +77,6 @@
 
 /**
  * struct isci_port - isci direct attached sas port object
- * @event: counts bcns and port stop events (for bcn filtering)
  * @ready_exit: several states constitute 'ready'. When exiting ready we
  *              need to take extra port-teardown actions that are
  *              skipped when exiting to another 'ready' state.
@@ -92,10 +91,6 @@
  */
 struct isci_port {
 	enum isci_status status;
-	#define IPORT_BCN_BLOCKED 0
-	#define IPORT_BCN_PENDING 1
-	unsigned long flags;
-	atomic_t event;
 	struct isci_host *isci_host;
 	struct asd_sas_port sas_port;
 	struct list_head remote_dev_list;
@@ -109,6 +104,7 @@
 	u8 logical_port_index;
 	u8 physical_port_index;
 	u8 active_phy_mask;
+	u8 last_active_phy;
 	u16 reserved_rni;
 	u16 reserved_tag;
 	u32 started_request_count;
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index dc007e6..2c75248 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -112,7 +112,7 @@
 	 * This field specifies the maximum number of direct attached devices
 	 * that can have power supplied to them simultaneously.
 	 */
-	u8 max_number_concurrent_device_spin_up;
+	u8 max_concurr_spinup;
 
 	/**
 	 * This field specifies the number of seconds to allow a phy to consume
@@ -219,7 +219,7 @@
 struct sci_oem_params {
 	struct {
 		uint8_t mode_type;
-		uint8_t max_concurrent_dev_spin_up;
+		uint8_t max_concurr_spin_up;
 		uint8_t do_enable_ssc;
 		uint8_t reserved;
 	} controller;
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index fbf9ce2..b207cd3 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1438,88 +1438,3 @@
 
 	return status == SCI_SUCCESS ? 0 : -ENODEV;
 }
-/**
- * isci_device_is_reset_pending() - This function will check if there is any
- *    pending reset condition on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-bool isci_device_is_reset_pending(
-	struct isci_host *isci_host,
-	struct isci_remote_device *isci_device)
-{
-	struct isci_request *isci_request;
-	struct isci_request *tmp_req;
-	bool reset_is_pending = false;
-	unsigned long flags;
-
-	dev_dbg(&isci_host->pdev->dev,
-		"%s: isci_device = %p\n", __func__, isci_device);
-
-	spin_lock_irqsave(&isci_host->scic_lock, flags);
-
-	/* Check for reset on all pending requests. */
-	list_for_each_entry_safe(isci_request, tmp_req,
-				 &isci_device->reqs_in_process, dev_node) {
-		dev_dbg(&isci_host->pdev->dev,
-			"%s: isci_device = %p request = %p\n",
-			__func__, isci_device, isci_request);
-
-		if (isci_request->ttype == io_task) {
-			struct sas_task *task = isci_request_access_task(
-				isci_request);
-
-			spin_lock(&task->task_state_lock);
-			if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
-				reset_is_pending = true;
-			spin_unlock(&task->task_state_lock);
-		}
-	}
-
-	spin_unlock_irqrestore(&isci_host->scic_lock, flags);
-
-	dev_dbg(&isci_host->pdev->dev,
-		"%s: isci_device = %p reset_is_pending = %d\n",
-		__func__, isci_device, reset_is_pending);
-
-	return reset_is_pending;
-}
-
-/**
- * isci_device_clear_reset_pending() - This function will clear if any pending
- *    reset condition flags on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev)
-{
-	struct isci_request *isci_request;
-	struct isci_request *tmp_req;
-	unsigned long flags = 0;
-
-	dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n",
-		 __func__, idev, ihost);
-
-	spin_lock_irqsave(&ihost->scic_lock, flags);
-
-	/* Clear reset pending on all pending requests. */
-	list_for_each_entry_safe(isci_request, tmp_req,
-				 &idev->reqs_in_process, dev_node) {
-		dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n",
-			 __func__, idev, isci_request);
-
-		if (isci_request->ttype == io_task) {
-
-			unsigned long flags2;
-			struct sas_task *task = isci_request_access_task(
-				isci_request);
-
-			spin_lock_irqsave(&task->task_state_lock, flags2);
-			task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
-			spin_unlock_irqrestore(&task->task_state_lock, flags2);
-		}
-	}
-	spin_unlock_irqrestore(&ihost->scic_lock, flags);
-}
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index e1747ea..483ee501 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -132,10 +132,7 @@
 				      struct isci_remote_device *idev);
 void isci_remote_device_gone(struct domain_device *domain_dev);
 int isci_remote_device_found(struct domain_device *domain_dev);
-bool isci_device_is_reset_pending(struct isci_host *ihost,
-				  struct isci_remote_device *idev);
-void isci_device_clear_reset_pending(struct isci_host *ihost,
-				     struct isci_remote_device *idev);
+
 /**
  * sci_remote_device_stop() - This method will stop both transmission and
  *    reception of link activity for the supplied remote device.  This method
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 565a9f0..192cb48 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -191,7 +191,7 @@
 
 	task_iu->task_func = isci_tmf->tmf_code;
 	task_iu->task_tag =
-		(ireq->ttype == tmf_task) ?
+		(test_bit(IREQ_TMF, &ireq->flags)) ?
 		isci_tmf->io_tag :
 		SCI_CONTROLLER_INVALID_IO_TAG;
 }
@@ -516,7 +516,7 @@
 	struct domain_device *dev = ireq->target_device->domain_dev;
 
 	/* check for management protocols */
-	if (ireq->ttype == tmf_task) {
+	if (test_bit(IREQ_TMF, &ireq->flags)) {
 		struct isci_tmf *tmf = isci_request_access_tmf(ireq);
 
 		if (tmf->tmf_code == isci_tmf_sata_srst_high ||
@@ -632,7 +632,7 @@
 	enum sci_status status = SCI_SUCCESS;
 
 	/* check for management protocols */
-	if (ireq->ttype == tmf_task) {
+	if (test_bit(IREQ_TMF, &ireq->flags)) {
 		struct isci_tmf *tmf = isci_request_access_tmf(ireq);
 
 		if (tmf->tmf_code == isci_tmf_sata_srst_high ||
@@ -2630,14 +2630,8 @@
 	switch (task_notification_selection) {
 
 	case isci_perform_normal_io_completion:
-
 		/* Normal notification (task_done) */
-		dev_dbg(&host->pdev->dev,
-			"%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
-			__func__,
-			task,
-			task->task_status.resp, response,
-			task->task_status.stat, status);
+
 		/* Add to the completed list. */
 		list_add(&request->completed_node,
 			 &host->requests_to_complete);
@@ -2650,13 +2644,6 @@
 		/* No notification to libsas because this request is
 		 * already in the abort path.
 		 */
-		dev_dbg(&host->pdev->dev,
-			 "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
-			 __func__,
-			 task,
-			 task->task_status.resp, response,
-			 task->task_status.stat, status);
-
 		/* Wake up whatever process was waiting for this
 		 * request to complete.
 		 */
@@ -2673,30 +2660,22 @@
 
 	case isci_perform_error_io_completion:
 		/* Use sas_task_abort */
-		dev_dbg(&host->pdev->dev,
-			 "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
-			 __func__,
-			 task,
-			 task->task_status.resp, response,
-			 task->task_status.stat, status);
 		/* Add to the aborted list. */
 		list_add(&request->completed_node,
 			 &host->requests_to_errorback);
 		break;
 
 	default:
-		dev_dbg(&host->pdev->dev,
-			 "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
-			 __func__,
-			 task,
-			 task->task_status.resp, response,
-			 task->task_status.stat, status);
-
 		/* Add to the error to libsas list. */
 		list_add(&request->completed_node,
 			 &host->requests_to_errorback);
 		break;
 	}
+	dev_dbg(&host->pdev->dev,
+		"%s: %d - task = %p, response=%d (%d), status=%d (%d)\n",
+		__func__, task_notification_selection, task,
+		(task) ? task->task_status.resp : 0, response,
+		(task) ? task->task_status.stat : 0, status);
 }
 
 static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
@@ -2728,9 +2707,9 @@
 	struct sas_task *task = isci_request_access_task(request);
 	struct ssp_response_iu *resp_iu;
 	unsigned long task_flags;
-	struct isci_remote_device *idev = isci_lookup_device(task->dev);
-	enum service_response response       = SAS_TASK_UNDELIVERED;
-	enum exec_status status         = SAS_ABORTED_TASK;
+	struct isci_remote_device *idev = request->target_device;
+	enum service_response response = SAS_TASK_UNDELIVERED;
+	enum exec_status status = SAS_ABORTED_TASK;
 	enum isci_request_status request_status;
 	enum isci_completion_selection complete_to_host
 		= isci_perform_normal_io_completion;
@@ -3061,7 +3040,6 @@
 
 	/* complete the io request to the core. */
 	sci_controller_complete_io(ihost, request->target_device, request);
-	isci_put_device(idev);
 
 	/* set terminated handle so it cannot be completed or
 	 * terminated again, and to cause any calls into abort
@@ -3080,7 +3058,7 @@
 	/* XXX as hch said always creating an internal sas_task for tmf
 	 * requests would simplify the driver
 	 */
-	task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;
+	task = (test_bit(IREQ_TMF, &ireq->flags)) ? NULL : isci_request_access_task(ireq);
 
 	/* all unaccelerated request types (non ssp or ncq) handled with
 	 * substates
@@ -3564,7 +3542,7 @@
 
 	ireq = isci_request_from_tag(ihost, tag);
 	ireq->ttype_ptr.io_task_ptr = task;
-	ireq->ttype = io_task;
+	clear_bit(IREQ_TMF, &ireq->flags);
 	task->lldd_task = ireq;
 
 	return ireq;
@@ -3578,7 +3556,7 @@
 
 	ireq = isci_request_from_tag(ihost, tag);
 	ireq->ttype_ptr.tmf_task_ptr = isci_tmf;
-	ireq->ttype = tmf_task;
+	set_bit(IREQ_TMF, &ireq->flags);
 
 	return ireq;
 }
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
index f720b97..be38933 100644
--- a/drivers/scsi/isci/request.h
+++ b/drivers/scsi/isci/request.h
@@ -77,11 +77,6 @@
 	dead        = 0x07
 };
 
-enum task_type {
-	io_task  = 0,
-	tmf_task = 1
-};
-
 enum sci_request_protocol {
 	SCIC_NO_PROTOCOL,
 	SCIC_SMP_PROTOCOL,
@@ -116,7 +111,6 @@
 	#define IREQ_ACTIVE 3
 	unsigned long flags;
 	/* XXX kill ttype and ttype_ptr, allocate full sas_task */
-	enum task_type ttype;
 	union ttype_ptr_union {
 		struct sas_task *io_task_ptr;   /* When ttype==io_task  */
 		struct isci_tmf *tmf_task_ptr;  /* When ttype==tmf_task */
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index e2d9418..66ad3dc 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -212,16 +212,27 @@
 					task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
 					spin_unlock_irqrestore(&task->task_state_lock, flags);
 
-					/* Indicate QUEUE_FULL so that the scsi
-					* midlayer retries. if the request
-					* failed for remote device reasons,
-					* it gets returned as
-					* SAS_TASK_UNDELIVERED next time
-					* through.
-					*/
-					isci_task_refuse(ihost, task,
-							 SAS_TASK_COMPLETE,
-							 SAS_QUEUE_FULL);
+					if (test_bit(IDEV_GONE, &idev->flags)) {
+
+						/* Indicate that the device
+						 * is gone.
+						 */
+						isci_task_refuse(ihost, task,
+							SAS_TASK_UNDELIVERED,
+							SAS_DEVICE_UNKNOWN);
+					} else {
+						/* Indicate QUEUE_FULL so that
+						 * the scsi midlayer retries.
+						 * If the request failed for
+						 * remote device reasons, it
+						 * gets returned as
+						 * SAS_TASK_UNDELIVERED next
+						 * time through.
+						 */
+						isci_task_refuse(ihost, task,
+							SAS_TASK_COMPLETE,
+							SAS_QUEUE_FULL);
+					}
 				}
 			}
 		}
@@ -243,7 +254,7 @@
 	struct isci_tmf *isci_tmf;
 	enum sci_status status;
 
-	if (tmf_task != ireq->ttype)
+	if (!test_bit(IREQ_TMF, &ireq->flags))
 		return SCI_FAILURE;
 
 	isci_tmf = isci_request_access_tmf(ireq);
@@ -327,6 +338,60 @@
 	return ireq;
 }
 
+/**
+* isci_request_mark_zombie() - This function must be called with scic_lock held.
+*/
+static void isci_request_mark_zombie(struct isci_host *ihost, struct isci_request *ireq)
+{
+	struct completion *tmf_completion = NULL;
+	struct completion *req_completion;
+
+	/* Set the request state to "dead". */
+	ireq->status = dead;
+
+	req_completion = ireq->io_request_completion;
+	ireq->io_request_completion = NULL;
+
+	if (test_bit(IREQ_TMF, &ireq->flags)) {
+		/* Break links with the TMF request. */
+		struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+
+		/* In the case where a task request is dying,
+		 * the thread waiting on the complete will sit and
+		 * timeout unless we wake it now.  Since the TMF
+		 * has a default error status, complete it here
+		 * to wake the waiting thread.
+		 */
+		if (tmf) {
+			tmf_completion = tmf->complete;
+			tmf->complete = NULL;
+		}
+		ireq->ttype_ptr.tmf_task_ptr = NULL;
+		dev_dbg(&ihost->pdev->dev, "%s: tmf_code %d, managed tag %#x\n",
+			__func__, tmf->tmf_code, tmf->io_tag);
+	} else {
+		/* Break links with the sas_task - the callback is done
+		 * elsewhere.
+		 */
+		struct sas_task *task = isci_request_access_task(ireq);
+
+		if (task)
+			task->lldd_task = NULL;
+
+		ireq->ttype_ptr.io_task_ptr = NULL;
+	}
+
+	dev_warn(&ihost->pdev->dev, "task context unrecoverable (tag: %#x)\n",
+		 ireq->io_tag);
+
+	/* Don't force waiting threads to timeout. */
+	if (req_completion)
+		complete(req_completion);
+
+	if (tmf_completion != NULL)
+		complete(tmf_completion);
+}
+
 static int isci_task_execute_tmf(struct isci_host *ihost,
 				 struct isci_remote_device *idev,
 				 struct isci_tmf *tmf, unsigned long timeout_ms)
@@ -364,6 +429,7 @@
 
 	/* Assign the pointer to the TMF's completion kernel wait structure. */
 	tmf->complete = &completion;
+	tmf->status = SCI_FAILURE_TIMEOUT;
 
 	ireq = isci_task_request_build(ihost, idev, tag, tmf);
 	if (!ireq)
@@ -399,18 +465,35 @@
 					       msecs_to_jiffies(timeout_ms));
 
 	if (timeleft == 0) {
+		/* The TMF did not complete - this could be because
+		 * of an unplug.  Terminate the TMF request now.
+		 */
 		spin_lock_irqsave(&ihost->scic_lock, flags);
 
 		if (tmf->cb_state_func != NULL)
-			tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data);
+			tmf->cb_state_func(isci_tmf_timed_out, tmf,
+					   tmf->cb_data);
 
-		sci_controller_terminate_request(ihost,
-						  idev,
-						  ireq);
+		sci_controller_terminate_request(ihost, idev, ireq);
 
 		spin_unlock_irqrestore(&ihost->scic_lock, flags);
 
-		wait_for_completion(tmf->complete);
+		timeleft = wait_for_completion_timeout(
+			&completion,
+			msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
+
+		if (!timeleft) {
+			/* Strange condition - the termination of the TMF
+			 * request timed-out.
+			 */
+			spin_lock_irqsave(&ihost->scic_lock, flags);
+
+			/* If the TMF status has not changed, kill it. */
+			if (tmf->status == SCI_FAILURE_TIMEOUT)
+				isci_request_mark_zombie(ihost, ireq);
+
+			spin_unlock_irqrestore(&ihost->scic_lock, flags);
+		}
 	}
 
 	isci_print_tmf(tmf);
@@ -501,48 +584,17 @@
 	return old_state;
 }
 
-/**
-* isci_request_cleanup_completed_loiterer() - This function will take care of
-*    the final cleanup on any request which has been explicitly terminated.
-* @isci_host: This parameter specifies the ISCI host object
-* @isci_device: This is the device to which the request is pending.
-* @isci_request: This parameter specifies the terminated request object.
-* @task: This parameter is the libsas I/O request.
-*/
-static void isci_request_cleanup_completed_loiterer(
-	struct isci_host          *isci_host,
-	struct isci_remote_device *isci_device,
-	struct isci_request       *isci_request,
-	struct sas_task           *task)
+static int isci_request_is_dealloc_managed(enum isci_request_status stat)
 {
-	unsigned long flags;
-
-	dev_dbg(&isci_host->pdev->dev,
-		"%s: isci_device=%p, request=%p, task=%p\n",
-		__func__, isci_device, isci_request, task);
-
-	if (task != NULL) {
-
-		spin_lock_irqsave(&task->task_state_lock, flags);
-		task->lldd_task = NULL;
-
-		task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
-
-		isci_set_task_doneflags(task);
-
-		/* If this task is not in the abort path, call task_done. */
-		if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
-
-			spin_unlock_irqrestore(&task->task_state_lock, flags);
-			task->task_done(task);
-		} else
-			spin_unlock_irqrestore(&task->task_state_lock, flags);
-	}
-
-	if (isci_request != NULL) {
-		spin_lock_irqsave(&isci_host->scic_lock, flags);
-		list_del_init(&isci_request->dev_node);
-		spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+	switch (stat) {
+	case aborted:
+	case aborting:
+	case terminating:
+	case completed:
+	case dead:
+		return true;
+	default:
+		return false;
 	}
 }
 
@@ -563,11 +615,9 @@
 	enum sci_status status      = SCI_SUCCESS;
 	bool was_terminated         = false;
 	bool needs_cleanup_handling = false;
-	enum isci_request_status request_status;
 	unsigned long     flags;
 	unsigned long     termination_completed = 1;
 	struct completion *io_request_completion;
-	struct sas_task   *task;
 
 	dev_dbg(&ihost->pdev->dev,
 		"%s: device = %p; request = %p\n",
@@ -577,10 +627,6 @@
 
 	io_request_completion = isci_request->io_request_completion;
 
-	task = (isci_request->ttype == io_task)
-		? isci_request_access_task(isci_request)
-		: NULL;
-
 	/* Note that we are not going to control
 	 * the target to abort the request.
 	 */
@@ -619,42 +665,27 @@
 				__func__, isci_request, io_request_completion);
 
 			/* Wait here for the request to complete. */
-			#define TERMINATION_TIMEOUT_MSEC 500
 			termination_completed
 				= wait_for_completion_timeout(
 				   io_request_completion,
-				   msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC));
+				   msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC));
 
 			if (!termination_completed) {
 
 				/* The request to terminate has timed out.  */
-				spin_lock_irqsave(&ihost->scic_lock,
-						  flags);
+				spin_lock_irqsave(&ihost->scic_lock, flags);
 
 				/* Check for state changes. */
-				if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) {
+				if (!test_bit(IREQ_TERMINATED,
+					      &isci_request->flags)) {
 
 					/* The best we can do is to have the
 					 * request die a silent death if it
 					 * ever really completes.
-					 *
-					 * Set the request state to "dead",
-					 * and clear the task pointer so that
-					 * an actual completion event callback
-					 * doesn't do anything.
 					 */
-					isci_request->status = dead;
-					isci_request->io_request_completion
-						= NULL;
-
-					if (isci_request->ttype == io_task) {
-
-						/* Break links with the
-						* sas_task.
-						*/
-						isci_request->ttype_ptr.io_task_ptr
-							= NULL;
-					}
+					isci_request_mark_zombie(ihost,
+								 isci_request);
+					needs_cleanup_handling = true;
 				} else
 					termination_completed = 1;
 
@@ -691,29 +722,28 @@
 			 * needs to be detached and freed here.
 			 */
 			spin_lock_irqsave(&isci_request->state_lock, flags);
-			request_status = isci_request->status;
 
-			if ((isci_request->ttype == io_task) /* TMFs are in their own thread */
-			    && ((request_status == aborted)
-				|| (request_status == aborting)
-				|| (request_status == terminating)
-				|| (request_status == completed)
-				|| (request_status == dead)
-				)
-			    ) {
+			needs_cleanup_handling
+				= isci_request_is_dealloc_managed(
+					isci_request->status);
 
-				/* The completion routine won't free a request in
-				 * the aborted/aborting/etc. states, so we do
-				 * it here.
-				 */
-				needs_cleanup_handling = true;
-			}
 			spin_unlock_irqrestore(&isci_request->state_lock, flags);
 
 		}
-		if (needs_cleanup_handling)
-			isci_request_cleanup_completed_loiterer(
-				ihost, idev, isci_request, task);
+		if (needs_cleanup_handling) {
+
+			dev_dbg(&ihost->pdev->dev,
+				"%s: cleanup isci_device=%p, request=%p\n",
+				__func__, idev, isci_request);
+
+			if (isci_request != NULL) {
+				spin_lock_irqsave(&ihost->scic_lock, flags);
+				isci_free_tag(ihost, isci_request->io_tag);
+				isci_request_change_state(isci_request, unallocated);
+				list_del_init(&isci_request->dev_node);
+				spin_unlock_irqrestore(&ihost->scic_lock, flags);
+			}
+		}
 	}
 }
 
@@ -772,7 +802,9 @@
 		dev_dbg(&ihost->pdev->dev,
 			 "%s: idev=%p request=%p; task=%p old_state=%d\n",
 			 __func__, idev, ireq,
-			ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL,
+			(!test_bit(IREQ_TMF, &ireq->flags)
+				? isci_request_access_task(ireq)
+				: NULL),
 			old_state);
 
 		/* If the old_state is started:
@@ -889,22 +921,14 @@
 		"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
 		 __func__, domain_device, isci_host, isci_device);
 
-	if (isci_device)
-		set_bit(IDEV_EH, &isci_device->flags);
+	if (!isci_device) {
+		/* If the device is gone, stop the escalations. */
+		dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__);
 
-	/* If there is a device reset pending on any request in the
-	 * device's list, fail this LUN reset request in order to
-	 * escalate to the device reset.
-	 */
-	if (!isci_device ||
-	    isci_device_is_reset_pending(isci_host, isci_device)) {
-		dev_dbg(&isci_host->pdev->dev,
-			 "%s: No dev (%p), or "
-			 "RESET PENDING: domain_device=%p\n",
-			 __func__, isci_device, domain_device);
-		ret = TMF_RESP_FUNC_FAILED;
+		ret = TMF_RESP_FUNC_COMPLETE;
 		goto out;
 	}
+	set_bit(IDEV_EH, &isci_device->flags);
 
 	/* Send the task management part of the reset. */
 	if (sas_protocol_ata(domain_device->tproto)) {
@@ -1013,7 +1037,7 @@
 	struct isci_tmf           tmf;
 	int                       ret = TMF_RESP_FUNC_FAILED;
 	unsigned long             flags;
-	bool                      any_dev_reset = false;
+	int                       perform_termination = 0;
 
 	/* Get the isci_request reference from the task.  Note that
 	 * this check does not depend on the pending request list
@@ -1035,89 +1059,34 @@
 	spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
 	dev_dbg(&isci_host->pdev->dev,
-		"%s: task = %p\n", __func__, task);
+		"%s: dev = %p, task = %p, old_request == %p\n",
+		__func__, isci_device, task, old_request);
 
-	if (!isci_device || !old_request)
-		goto out;
+	if (isci_device)
+		set_bit(IDEV_EH, &isci_device->flags);
 
-	set_bit(IDEV_EH, &isci_device->flags);
-
-	/* This version of the driver will fail abort requests for
-	 * SATA/STP.  Failing the abort request this way will cause the
-	 * SCSI error handler thread to escalate to LUN reset
+	/* Device reset conditions signalled in task_state_flags are the
+	 * responsbility of libsas to observe at the start of the error
+	 * handler thread.
 	 */
-	if (sas_protocol_ata(task->task_proto)) {
-		dev_dbg(&isci_host->pdev->dev,
-			    " task %p is for a STP/SATA device;"
-			    " returning TMF_RESP_FUNC_FAILED\n"
-			    " to cause a LUN reset...\n", task);
-		goto out;
-	}
-
-	dev_dbg(&isci_host->pdev->dev,
-		"%s: old_request == %p\n", __func__, old_request);
-
-	any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-
-	any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
-
-	/* If the extraction of the request reference from the task
-	 * failed, then the request has been completed (or if there is a
-	 * pending reset then this abort request function must be failed
-	 * in order to escalate to the target reset).
-	 */
-	if ((old_request == NULL) || any_dev_reset) {
-
-		/* If the device reset task flag is set, fail the task
-		 * management request.  Otherwise, the original request
-		 * has completed.
-		 */
-		if (any_dev_reset) {
-
-			/* Turn off the task's DONE to make sure this
-			 * task is escalated to a target reset.
-			 */
-			task->task_state_flags &= ~SAS_TASK_STATE_DONE;
-
-			/* Make the reset happen as soon as possible. */
-			task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
-
-			spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-			/* Fail the task management request in order to
-			 * escalate to the target reset.
-			 */
-			ret = TMF_RESP_FUNC_FAILED;
-
-			dev_dbg(&isci_host->pdev->dev,
-				"%s: Failing task abort in order to "
-				"escalate to target reset because\n"
-				"SAS_TASK_NEED_DEV_RESET is set for "
-				"task %p on dev %p\n",
-				__func__, task, isci_device);
-
-
-		} else {
-			/* The request has already completed and there
-			 * is nothing to do here other than to set the task
-			 * done bit, and indicate that the task abort function
-			 * was sucessful.
-			 */
-			isci_set_task_doneflags(task);
-
-			spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-			ret = TMF_RESP_FUNC_COMPLETE;
-
-			dev_dbg(&isci_host->pdev->dev,
-				"%s: abort task not needed for %p\n",
-				__func__, task);
-		}
-		goto out;
-	} else {
+	if (!isci_device || !old_request) {
+		/* The request has already completed and there
+		* is nothing to do here other than to set the task
+		* done bit, and indicate that the task abort function
+		* was sucessful.
+		*/
+		spin_lock_irqsave(&task->task_state_lock, flags);
+		task->task_state_flags |= SAS_TASK_STATE_DONE;
+		task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+					    SAS_TASK_STATE_PENDING);
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+		ret = TMF_RESP_FUNC_COMPLETE;
+
+		dev_dbg(&isci_host->pdev->dev,
+			"%s: abort task not needed for %p\n",
+			__func__, task);
+		goto out;
 	}
 
 	spin_lock_irqsave(&isci_host->scic_lock, flags);
@@ -1146,24 +1115,44 @@
 		goto out;
 	}
 	if (task->task_proto == SAS_PROTOCOL_SMP ||
+	    sas_protocol_ata(task->task_proto) ||
 	    test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
 
 		spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
 		dev_dbg(&isci_host->pdev->dev,
-			"%s: SMP request (%d)"
+			"%s: %s request"
 			" or complete_in_target (%d), thus no TMF\n",
-			__func__, (task->task_proto == SAS_PROTOCOL_SMP),
+			__func__,
+			((task->task_proto == SAS_PROTOCOL_SMP)
+				? "SMP"
+				: (sas_protocol_ata(task->task_proto)
+					? "SATA/STP"
+					: "<other>")
+			 ),
 			test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
 
-		/* Set the state on the task. */
-		isci_task_all_done(task);
+		if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+			spin_lock_irqsave(&task->task_state_lock, flags);
+			task->task_state_flags |= SAS_TASK_STATE_DONE;
+			task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+						    SAS_TASK_STATE_PENDING);
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+			ret = TMF_RESP_FUNC_COMPLETE;
+		} else {
+			spin_lock_irqsave(&task->task_state_lock, flags);
+			task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+						    SAS_TASK_STATE_PENDING);
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+		}
 
-		ret = TMF_RESP_FUNC_COMPLETE;
-
-		/* Stopping and SMP devices are not sent a TMF, and are not
-		 * reset, but the outstanding I/O request is terminated below.
+		/* STP and SMP devices are not sent a TMF, but the
+		 * outstanding I/O request is terminated below.  This is
+		 * because SATA/STP and SMP discovery path timeouts directly
+		 * call the abort task interface for cleanup.
 		 */
+		perform_termination = 1;
+
 	} else {
 		/* Fill in the tmf stucture */
 		isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
@@ -1172,22 +1161,24 @@
 
 		spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
-		#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+		#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
 		ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
 					    ISCI_ABORT_TASK_TIMEOUT_MS);
 
-		if (ret != TMF_RESP_FUNC_COMPLETE)
+		if (ret == TMF_RESP_FUNC_COMPLETE)
+			perform_termination = 1;
+		else
 			dev_dbg(&isci_host->pdev->dev,
-				"%s: isci_task_send_tmf failed\n",
-				__func__);
+				"%s: isci_task_send_tmf failed\n", __func__);
 	}
-	if (ret == TMF_RESP_FUNC_COMPLETE) {
+	if (perform_termination) {
 		set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
 
 		/* Clean up the request on our side, and wait for the aborted
 		 * I/O to complete.
 		 */
-		isci_terminate_request_core(isci_host, isci_device, old_request);
+		isci_terminate_request_core(isci_host, isci_device,
+					    old_request);
 	}
 
 	/* Make sure we do not leave a reference to aborted_io_completion */
@@ -1288,7 +1279,8 @@
 			   enum sci_task_status completion_status)
 {
 	struct isci_tmf *tmf = isci_request_access_tmf(ireq);
-	struct completion *tmf_complete;
+	struct completion *tmf_complete = NULL;
+	struct completion *request_complete = ireq->io_request_completion;
 
 	dev_dbg(&ihost->pdev->dev,
 		"%s: request = %p, status=%d\n",
@@ -1296,255 +1288,53 @@
 
 	isci_request_change_state(ireq, completed);
 
-	tmf->status = completion_status;
 	set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
 
-	if (tmf->proto == SAS_PROTOCOL_SSP) {
-		memcpy(&tmf->resp.resp_iu,
-		       &ireq->ssp.rsp,
-		       SSP_RESP_IU_MAX_SIZE);
-	} else if (tmf->proto == SAS_PROTOCOL_SATA) {
-		memcpy(&tmf->resp.d2h_fis,
-		       &ireq->stp.rsp,
-		       sizeof(struct dev_to_host_fis));
+	if (tmf) {
+		tmf->status = completion_status;
+
+		if (tmf->proto == SAS_PROTOCOL_SSP) {
+			memcpy(&tmf->resp.resp_iu,
+			       &ireq->ssp.rsp,
+			       SSP_RESP_IU_MAX_SIZE);
+		} else if (tmf->proto == SAS_PROTOCOL_SATA) {
+			memcpy(&tmf->resp.d2h_fis,
+			       &ireq->stp.rsp,
+			       sizeof(struct dev_to_host_fis));
+		}
+		/* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+		tmf_complete = tmf->complete;
 	}
-
-	/* PRINT_TMF( ((struct isci_tmf *)request->task)); */
-	tmf_complete = tmf->complete;
-
 	sci_controller_complete_io(ihost, ireq->target_device, ireq);
 	/* set the 'terminated' flag handle to make sure it cannot be terminated
 	 *  or completed again.
 	 */
 	set_bit(IREQ_TERMINATED, &ireq->flags);
 
-	isci_request_change_state(ireq, unallocated);
-	list_del_init(&ireq->dev_node);
+	/* As soon as something is in the terminate path, deallocation is
+	 * managed there.  Note that the final non-managed state of a task
+	 * request is "completed".
+	 */
+	if ((ireq->status == completed) ||
+	    !isci_request_is_dealloc_managed(ireq->status)) {
+		isci_request_change_state(ireq, unallocated);
+		isci_free_tag(ihost, ireq->io_tag);
+		list_del_init(&ireq->dev_node);
+	}
+
+	/* "request_complete" is set if the task was being terminated. */
+	if (request_complete)
+		complete(request_complete);
 
 	/* The task management part completes last. */
-	complete(tmf_complete);
-}
-
-static void isci_smp_task_timedout(unsigned long _task)
-{
-	struct sas_task *task = (void *) _task;
-	unsigned long flags;
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
-		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	complete(&task->completion);
-}
-
-static void isci_smp_task_done(struct sas_task *task)
-{
-	if (!del_timer(&task->timer))
-		return;
-	complete(&task->completion);
-}
-
-static int isci_smp_execute_task(struct isci_host *ihost,
-				 struct domain_device *dev, void *req,
-				 int req_size, void *resp, int resp_size)
-{
-	int res, retry;
-	struct sas_task *task = NULL;
-
-	for (retry = 0; retry < 3; retry++) {
-		task = sas_alloc_task(GFP_KERNEL);
-		if (!task)
-			return -ENOMEM;
-
-		task->dev = dev;
-		task->task_proto = dev->tproto;
-		sg_init_one(&task->smp_task.smp_req, req, req_size);
-		sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
-
-		task->task_done = isci_smp_task_done;
-
-		task->timer.data = (unsigned long) task;
-		task->timer.function = isci_smp_task_timedout;
-		task->timer.expires = jiffies + 10*HZ;
-		add_timer(&task->timer);
-
-		res = isci_task_execute_task(task, 1, GFP_KERNEL);
-
-		if (res) {
-			del_timer(&task->timer);
-			dev_dbg(&ihost->pdev->dev,
-				"%s: executing SMP task failed:%d\n",
-				__func__, res);
-			goto ex_err;
-		}
-
-		wait_for_completion(&task->completion);
-		res = -ECOMM;
-		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
-			dev_dbg(&ihost->pdev->dev,
-				"%s: smp task timed out or aborted\n",
-				__func__);
-			isci_task_abort_task(task);
-			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
-				dev_dbg(&ihost->pdev->dev,
-					"%s: SMP task aborted and not done\n",
-					__func__);
-				goto ex_err;
-			}
-		}
-		if (task->task_status.resp == SAS_TASK_COMPLETE &&
-		    task->task_status.stat == SAM_STAT_GOOD) {
-			res = 0;
-			break;
-		}
-		if (task->task_status.resp == SAS_TASK_COMPLETE &&
-		      task->task_status.stat == SAS_DATA_UNDERRUN) {
-			/* no error, but return the number of bytes of
-			* underrun */
-			res = task->task_status.residual;
-			break;
-		}
-		if (task->task_status.resp == SAS_TASK_COMPLETE &&
-		      task->task_status.stat == SAS_DATA_OVERRUN) {
-			res = -EMSGSIZE;
-			break;
-		} else {
-			dev_dbg(&ihost->pdev->dev,
-				"%s: task to dev %016llx response: 0x%x "
-				"status 0x%x\n", __func__,
-				SAS_ADDR(dev->sas_addr),
-				task->task_status.resp,
-				task->task_status.stat);
-			sas_free_task(task);
-			task = NULL;
-		}
-	}
-ex_err:
-	BUG_ON(retry == 3 && task != NULL);
-	sas_free_task(task);
-	return res;
-}
-
-#define DISCOVER_REQ_SIZE  16
-#define DISCOVER_RESP_SIZE 56
-
-int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost,
-				       struct domain_device *dev,
-				       int phy_id, int *adt)
-{
-	struct smp_resp *disc_resp;
-	u8 *disc_req;
-	int res;
-
-	disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL);
-	if (!disc_resp)
-		return -ENOMEM;
-
-	disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL);
-	if (disc_req) {
-		disc_req[0] = SMP_REQUEST;
-		disc_req[1] = SMP_DISCOVER;
-		disc_req[9] = phy_id;
-	} else {
-		kfree(disc_resp);
-		return -ENOMEM;
-	}
-	res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE,
-				    disc_resp, DISCOVER_RESP_SIZE);
-	if (!res) {
-		if (disc_resp->result != SMP_RESP_FUNC_ACC)
-			res = disc_resp->result;
-		else
-			*adt = disc_resp->disc.attached_dev_type;
-	}
-	kfree(disc_req);
-	kfree(disc_resp);
-
-	return res;
-}
-
-static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num)
-{
-	struct domain_device *dev = idev->domain_dev;
-	struct isci_port *iport = idev->isci_port;
-	struct isci_host *ihost = iport->isci_host;
-	int res, iteration = 0, attached_device_type;
-	#define STP_WAIT_MSECS 25000
-	unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS);
-	unsigned long deadline = jiffies + tmo;
-	enum {
-		SMP_PHYWAIT_PHYDOWN,
-		SMP_PHYWAIT_PHYUP,
-		SMP_PHYWAIT_DONE
-	} phy_state = SMP_PHYWAIT_PHYDOWN;
-
-	/* While there is time, wait for the phy to go away and come back */
-	while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) {
-		int event = atomic_read(&iport->event);
-
-		++iteration;
-
-		tmo = wait_event_timeout(ihost->eventq,
-					 event != atomic_read(&iport->event) ||
-					 !test_bit(IPORT_BCN_BLOCKED, &iport->flags),
-					 tmo);
-		/* link down, stop polling */
-		if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags))
-			break;
-
-		dev_dbg(&ihost->pdev->dev,
-			"%s: iport %p, iteration %d,"
-			" phase %d: time_remaining %lu, bcns = %d\n",
-			__func__, iport, iteration, phy_state,
-			tmo, test_bit(IPORT_BCN_PENDING, &iport->flags));
-
-		res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num,
-							 &attached_device_type);
-		tmo = deadline - jiffies;
-
-		if (res) {
-			dev_dbg(&ihost->pdev->dev,
-				 "%s: iteration %d, phase %d:"
-				 " SMP error=%d, time_remaining=%lu\n",
-				 __func__, iteration, phy_state, res, tmo);
-			break;
-		}
-		dev_dbg(&ihost->pdev->dev,
-			"%s: iport %p, iteration %d,"
-			" phase %d: time_remaining %lu, bcns = %d, "
-			"attdevtype = %x\n",
-			__func__, iport, iteration, phy_state,
-			tmo, test_bit(IPORT_BCN_PENDING, &iport->flags),
-			attached_device_type);
-
-		switch (phy_state) {
-		case SMP_PHYWAIT_PHYDOWN:
-			/* Has the device gone away? */
-			if (!attached_device_type)
-				phy_state = SMP_PHYWAIT_PHYUP;
-
-			break;
-
-		case SMP_PHYWAIT_PHYUP:
-			/* Has the device come back? */
-			if (attached_device_type)
-				phy_state = SMP_PHYWAIT_DONE;
-			break;
-
-		case SMP_PHYWAIT_DONE:
-			break;
-		}
-
-	}
-	dev_dbg(&ihost->pdev->dev, "%s: done\n",  __func__);
+	if (tmf_complete)
+		complete(tmf_complete);
 }
 
 static int isci_reset_device(struct isci_host *ihost,
 			     struct isci_remote_device *idev)
 {
 	struct sas_phy *phy = sas_find_local_phy(idev->domain_dev);
-	struct isci_port *iport = idev->isci_port;
 	enum sci_status status;
 	unsigned long flags;
 	int rc;
@@ -1564,13 +1354,6 @@
 	}
 	spin_unlock_irqrestore(&ihost->scic_lock, flags);
 
-	/* Make sure all pending requests are able to be fully terminated. */
-	isci_device_clear_reset_pending(ihost, idev);
-
-	/* If this is a device on an expander, disable BCN processing. */
-	if (!scsi_is_sas_phy_local(phy))
-		set_bit(IPORT_BCN_BLOCKED, &iport->flags);
-
 	rc = sas_phy_reset(phy, true);
 
 	/* Terminate in-progress I/O now. */
@@ -1581,21 +1364,6 @@
 	status = sci_remote_device_reset_complete(idev);
 	spin_unlock_irqrestore(&ihost->scic_lock, flags);
 
-	/* If this is a device on an expander, bring the phy back up. */
-	if (!scsi_is_sas_phy_local(phy)) {
-		/* A phy reset will cause the device to go away then reappear.
-		 * Since libsas will take action on incoming BCNs (eg. remove
-		 * a device going through an SMP phy-control driven reset),
-		 * we need to wait until the phy comes back up before letting
-		 * discovery proceed in libsas.
-		 */
-		isci_wait_for_smp_phy_reset(idev, phy->number);
-
-		spin_lock_irqsave(&ihost->scic_lock, flags);
-		isci_port_bcn_enable(ihost, idev->isci_port);
-		spin_unlock_irqrestore(&ihost->scic_lock, flags);
-	}
-
 	if (status != SCI_SUCCESS) {
 		dev_dbg(&ihost->pdev->dev,
 			 "%s: sci_remote_device_reset_complete(%p) "
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index 15b18d1..bc78c0a 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -58,6 +58,8 @@
 #include <scsi/sas_ata.h>
 #include "host.h"
 
+#define ISCI_TERMINATION_TIMEOUT_MSEC 500
+
 struct isci_request;
 
 /**
@@ -224,35 +226,6 @@
 	isci_perform_error_io_completion        /* Use sas_task_abort */
 };
 
-static inline void isci_set_task_doneflags(
-	struct sas_task *task)
-{
-	/* Since no futher action will be taken on this task,
-	 * make sure to mark it complete from the lldd perspective.
-	 */
-	task->task_state_flags |= SAS_TASK_STATE_DONE;
-	task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
-	task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-}
-/**
- * isci_task_all_done() - This function clears the task bits to indicate the
- *    LLDD is done with the task.
- *
- *
- */
-static inline void isci_task_all_done(
-	struct sas_task *task)
-{
-	unsigned long flags;
-
-	/* Since no futher action will be taken on this task,
-	 * make sure to mark it complete from the lldd perspective.
-	 */
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	isci_set_task_doneflags(task);
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-}
-
 /**
  * isci_task_set_completion_status() - This function sets the completion status
  *    for the request.
@@ -334,7 +307,9 @@
 		/* Fall through to the normal case... */
 	case isci_perform_normal_io_completion:
 		/* Normal notification (task_done) */
-		isci_set_task_doneflags(task);
+		task->task_state_flags |= SAS_TASK_STATE_DONE;
+		task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+					    SAS_TASK_STATE_PENDING);
 		break;
 	default:
 		WARN_ONCE(1, "unknown task_notification_selection: %d\n",
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 23e7066..7c34d8e 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/kfifo.h>
 #include <linux/scatterlist.h>
+#include <linux/module.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index b9cb814..7269e92 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -35,6 +35,7 @@
 #include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include <scsi/fc/fc_gs.h>
diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c
index 9b25969..fb9161d 100644
--- a/drivers/scsi/libfc/fc_elsct.c
+++ b/drivers/scsi/libfc/fc_elsct.c
@@ -21,6 +21,7 @@
  * Provide interface to send ELS/CT FC frames
  */
 
+#include <linux/export.h>
 #include <asm/unaligned.h>
 #include <scsi/fc/fc_gs.h>
 #include <scsi/fc/fc_ns.h>
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 7c055fd..9de9db2 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -26,6 +26,7 @@
 #include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 
 #include <scsi/fc/fc_fc2.h>
 
@@ -469,6 +470,7 @@
 	struct fc_frame_header *fh = fc_frame_header_get(fp);
 	int error;
 	u32 f_ctl;
+	u8 fh_type = fh->fh_type;
 
 	ep = fc_seq_exch(sp);
 	WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT);
@@ -493,7 +495,7 @@
 	 */
 	error = lport->tt.frame_send(lport, fp);
 
-	if (fh->fh_type == FC_TYPE_BLS)
+	if (fh_type == FC_TYPE_BLS)
 		return error;
 
 	/*
@@ -1792,6 +1794,9 @@
 			goto restart;
 		}
 	}
+	pool->next_index = 0;
+	pool->left = FC_XID_UNKNOWN;
+	pool->right = FC_XID_UNKNOWN;
 	spin_unlock_bh(&pool->lock);
 }
 
@@ -2280,6 +2285,7 @@
 		goto free_mempool;
 	for_each_possible_cpu(cpu) {
 		pool = per_cpu_ptr(mp->pool, cpu);
+		pool->next_index = 0;
 		pool->left = FC_XID_UNKNOWN;
 		pool->right = FC_XID_UNKNOWN;
 		spin_lock_init(&pool->lock);
diff --git a/drivers/scsi/libfc/fc_libfc.c b/drivers/scsi/libfc/fc_libfc.c
index b773512..1bf9841 100644
--- a/drivers/scsi/libfc/fc_libfc.c
+++ b/drivers/scsi/libfc/fc_libfc.c
@@ -21,6 +21,7 @@
 #include <linux/types.h>
 #include <linux/scatterlist.h>
 #include <linux/crc32.h>
+#include <linux/module.h>
 
 #include <scsi/libfc.h>
 #include <scsi/fc_encode.h>
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 628f347..e77094a 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -89,6 +89,7 @@
 
 #include <linux/timer.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
@@ -1030,16 +1031,8 @@
 			   FCH_EVT_LIPRESET, 0);
 	fc_vports_linkchange(lport);
 	fc_lport_reset_locked(lport);
-	if (lport->link_up) {
-		/*
-		 * Wait upto resource allocation time out before
-		 * doing re-login since incomplete FIP exchanged
-		 * from last session may collide with exchanges
-		 * in new session.
-		 */
-		msleep(lport->r_a_tov);
+	if (lport->link_up)
 		fc_lport_enter_flogi(lport);
-	}
 }
 
 /**
@@ -1481,6 +1474,7 @@
 			 void *lp_arg)
 {
 	struct fc_lport *lport = lp_arg;
+	struct fc_frame_header *fh;
 	struct fc_els_flogi *flp;
 	u32 did;
 	u16 csp_flags;
@@ -1508,49 +1502,56 @@
 		goto err;
 	}
 
+	fh = fc_frame_header_get(fp);
 	did = fc_frame_did(fp);
-	if (fc_frame_payload_op(fp) == ELS_LS_ACC && did) {
-		flp = fc_frame_payload_get(fp, sizeof(*flp));
-		if (flp) {
-			mfs = ntohs(flp->fl_csp.sp_bb_data) &
-				FC_SP_BB_DATA_MASK;
-			if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
-			    mfs < lport->mfs)
-				lport->mfs = mfs;
-			csp_flags = ntohs(flp->fl_csp.sp_features);
-			r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
-			e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
-			if (csp_flags & FC_SP_FT_EDTR)
-				e_d_tov /= 1000000;
-
-			lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
-
-			if ((csp_flags & FC_SP_FT_FPORT) == 0) {
-				if (e_d_tov > lport->e_d_tov)
-					lport->e_d_tov = e_d_tov;
-				lport->r_a_tov = 2 * e_d_tov;
-				fc_lport_set_port_id(lport, did, fp);
-				printk(KERN_INFO "host%d: libfc: "
-				       "Port (%6.6x) entered "
-				       "point-to-point mode\n",
-				       lport->host->host_no, did);
-				fc_lport_ptp_setup(lport, fc_frame_sid(fp),
-						   get_unaligned_be64(
-							   &flp->fl_wwpn),
-						   get_unaligned_be64(
-							   &flp->fl_wwnn));
-			} else {
-				lport->e_d_tov = e_d_tov;
-				lport->r_a_tov = r_a_tov;
-				fc_host_fabric_name(lport->host) =
-					get_unaligned_be64(&flp->fl_wwnn);
-				fc_lport_set_port_id(lport, did, fp);
-				fc_lport_enter_dns(lport);
-			}
-		}
-	} else {
-		FC_LPORT_DBG(lport, "FLOGI RJT or bad response\n");
+	if (fh->fh_r_ctl != FC_RCTL_ELS_REP || did == 0 ||
+	    fc_frame_payload_op(fp) != ELS_LS_ACC) {
+		FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
 		fc_lport_error(lport, fp);
+		goto err;
+	}
+
+	flp = fc_frame_payload_get(fp, sizeof(*flp));
+	if (!flp) {
+		FC_LPORT_DBG(lport, "FLOGI bad response\n");
+		fc_lport_error(lport, fp);
+		goto err;
+	}
+
+	mfs = ntohs(flp->fl_csp.sp_bb_data) &
+		FC_SP_BB_DATA_MASK;
+	if (mfs >= FC_SP_MIN_MAX_PAYLOAD &&
+	    mfs < lport->mfs)
+		lport->mfs = mfs;
+	csp_flags = ntohs(flp->fl_csp.sp_features);
+	r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov);
+	e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
+	if (csp_flags & FC_SP_FT_EDTR)
+		e_d_tov /= 1000000;
+
+	lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
+
+	if ((csp_flags & FC_SP_FT_FPORT) == 0) {
+		if (e_d_tov > lport->e_d_tov)
+			lport->e_d_tov = e_d_tov;
+		lport->r_a_tov = 2 * e_d_tov;
+		fc_lport_set_port_id(lport, did, fp);
+		printk(KERN_INFO "host%d: libfc: "
+		       "Port (%6.6x) entered "
+		       "point-to-point mode\n",
+		       lport->host->host_no, did);
+		fc_lport_ptp_setup(lport, fc_frame_sid(fp),
+				   get_unaligned_be64(
+					   &flp->fl_wwpn),
+				   get_unaligned_be64(
+					   &flp->fl_wwnn));
+	} else {
+		lport->e_d_tov = e_d_tov;
+		lport->r_a_tov = r_a_tov;
+		fc_host_fabric_name(lport->host) =
+			get_unaligned_be64(&flp->fl_wwnn);
+		fc_lport_set_port_id(lport, did, fp);
+		fc_lport_enter_dns(lport);
 	}
 
 out:
diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c
index f33b897..9fbf78e 100644
--- a/drivers/scsi/libfc/fc_npiv.c
+++ b/drivers/scsi/libfc/fc_npiv.c
@@ -22,6 +22,7 @@
  */
 
 #include <scsi/libfc.h>
+#include <linux/export.h>
 
 /**
  * fc_vport_create() - Create a new NPIV vport instance
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 760db76..b9e4348 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -51,6 +51,7 @@
 #include <linux/rcupdate.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include <scsi/libfc.h>
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index d7c76f2..143bbe4 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 09b232fd..5715a3d 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/kfifo.h>
 #include <linux/scatterlist.h>
+#include <linux/module.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index e1aa178..bb8f492 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -11,6 +11,7 @@
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "sas_internal.h"
 
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index b2c4a77..b6e233d 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -25,6 +25,7 @@
 
 #include <linux/kthread.h>
 #include <linux/firmware.h>
+#include <linux/export.h>
 #include <linux/ctype.h>
 
 #include "sas_internal.h"
diff --git a/drivers/scsi/libsas/sas_task.c b/drivers/scsi/libsas/sas_task.c
index b13a334..a78e5bd 100644
--- a/drivers/scsi/libsas/sas_task.c
+++ b/drivers/scsi/libsas/sas_task.c
@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <scsi/sas.h>
 #include <scsi/libsas.h>
 
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index ff6a28c..0707ecd 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -23,6 +23,7 @@
 #include <linux/kfifo.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4b0333e..d0ebaeb 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/aer.h>
 #include <linux/gfp.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2cd844f..2838259 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -20,6 +20,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/idr.h>
 #include <linux/interrupt.h>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 907c94b..55bc4fc 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/idr.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/kthread.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 5b8790b..2e1e54e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 6c42dff..e617337 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -17,6 +17,7 @@
 #include <linux/stat.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/dbdma.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 8883ca3..35bd138 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -71,6 +71,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "megaraid_mbox.h"
 
 static int megaraid_init(void);
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 3105d5e..8dc1b32 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2.h
@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.18
+ *  mpi2.h Version:  02.00.20
  *
  *  Version History
  *  ---------------
@@ -66,6 +66,9 @@
  *  08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
  *  11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
  *                      Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
+ *  02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
+ *  03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -91,7 +94,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x12)
+#define MPI2_HEADER_VERSION_UNIT            (0x14)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
@@ -515,6 +518,8 @@
 #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
 /* Power Management Control */
 #define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
+/* Send Host Message */
+#define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
 /* beginning of product-specific range */
 #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
 /* end of product-specific range */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 61475a6..cfd95b4 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2_cnfg.h
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.17
+ *    mpi2_cnfg.h Version:  02.00.19
  *
  *  Version History
  *  ---------------
@@ -134,6 +134,12 @@
  *                      to MPI2_CONFIG_PAGE_IO_UNIT_7.
  *                      Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
  *                      and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
+ *  02-23-11  02.00.18  Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
+ *                      Added IO Unit Page 8, IO Unit Page 9,
+ *                      and IO Unit Page 10.
+ *                      Added SASNotifyPrimitiveMasks field to
+ *                      MPI2_CONFIG_PAGE_IOC_7.
+ *  03-09-11  02.00.19  Fixed IO Unit Page 10 (to match the spec).
  *  --------------------------------------------------------------------------
  */
 
@@ -329,7 +335,9 @@
     U8                      VP_ID;                      /* 0x08 */
     U8                      VF_ID;                      /* 0x09 */
     U16                     Reserved1;                  /* 0x0A */
-    U32                     Reserved2;                  /* 0x0C */
+	U8                      Reserved2;                  /* 0x0C */
+	U8                      ProxyVF_ID;                 /* 0x0D */
+	U16                     Reserved4;                  /* 0x0E */
     U32                     Reserved3;                  /* 0x10 */
     MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x14 */
     U32                     PageAddress;                /* 0x18 */
@@ -915,6 +923,120 @@
 #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT      (0x01)
 #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS         (0x02)
 
+/* IO Unit Page 8 */
+
+#define MPI2_IOUNIT8_NUM_THRESHOLDS     (4)
+
+typedef struct _MPI2_IOUNIT8_SENSOR {
+	U16                     Flags;                /* 0x00 */
+	U16                     Reserved1;            /* 0x02 */
+	U16
+		Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */
+	U32                     Reserved2;            /* 0x0C */
+	U32                     Reserved3;            /* 0x10 */
+	U32                     Reserved4;            /* 0x14 */
+} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR,
+Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t;
+
+/* defines for IO Unit Page 8 Sensor Flags field */
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE         (0x0008)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE         (0x0004)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE         (0x0002)
+#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE         (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
+	MPI2_CONFIG_PAGE_HEADER Header;               /* 0x00 */
+	U32                     Reserved1;            /* 0x04 */
+	U32                     Reserved2;            /* 0x08 */
+	U8                      NumSensors;           /* 0x0C */
+	U8                      PollingInterval;      /* 0x0D */
+	U16                     Reserved3;            /* 0x0E */
+	MPI2_IOUNIT8_SENSOR
+			Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
+Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t;
+
+#define MPI2_IOUNITPAGE8_PAGEVERSION                    (0x00)
+
+
+/* IO Unit Page 9 */
+
+typedef struct _MPI2_IOUNIT9_SENSOR {
+	U16                     CurrentTemperature;     /* 0x00 */
+	U16                     Reserved1;              /* 0x02 */
+	U8                      Flags;                  /* 0x04 */
+	U8                      Reserved2;              /* 0x05 */
+	U16                     Reserved3;              /* 0x06 */
+	U32                     Reserved4;              /* 0x08 */
+	U32                     Reserved5;              /* 0x0C */
+} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR,
+Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t;
+
+/* defines for IO Unit Page 9 Sensor Flags field */
+#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID        (0x01)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumSensors at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
+#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES     (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
+	MPI2_CONFIG_PAGE_HEADER Header;                /* 0x00 */
+	U32                     Reserved1;             /* 0x04 */
+	U32                     Reserved2;             /* 0x08 */
+	U8                      NumSensors;            /* 0x0C */
+	U8                      Reserved4;             /* 0x0D */
+	U16                     Reserved3;             /* 0x0E */
+	MPI2_IOUNIT9_SENSOR
+			Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
+Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t;
+
+#define MPI2_IOUNITPAGE9_PAGEVERSION                    (0x00)
+
+
+/* IO Unit Page 10 */
+
+typedef struct _MPI2_IOUNIT10_FUNCTION {
+	U8                      CreditPercent;      /* 0x00 */
+	U8                      Reserved1;          /* 0x01 */
+	U16                     Reserved2;          /* 0x02 */
+} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION,
+Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t;
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumFunctions at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
+#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES      (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
+	MPI2_CONFIG_PAGE_HEADER Header;                    /* 0x00 */
+	U8                      NumFunctions;             /* 0x04 */
+	U8                      Reserved1;              /* 0x05 */
+	U16                     Reserved2;              /* 0x06 */
+	U32                     Reserved3;              /* 0x08 */
+	U32                     Reserved4;		/* 0x0C */
+	MPI2_IOUNIT10_FUNCTION
+		Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */
+} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
+Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t;
+
+#define MPI2_IOUNITPAGE10_PAGEVERSION                   (0x01)
+
 
 
 /****************************************************************************
@@ -1022,12 +1144,12 @@
     U32                     Reserved1;                  /* 0x04 */
     U32                     EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
     U16                     SASBroadcastPrimitiveMasks; /* 0x18 */
-    U16                     Reserved2;                  /* 0x1A */
+	U16                     SASNotifyPrimitiveMasks;    /* 0x1A */
     U32                     Reserved3;                  /* 0x1C */
 } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
   Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
 
-#define MPI2_IOCPAGE7_PAGEVERSION                       (0x01)
+#define MPI2_IOCPAGE7_PAGEVERSION                       (0x02)
 
 
 /* IOC Page 8 */
@@ -2070,16 +2192,16 @@
 #define MPI2_SASIOUNITPAGE8_PAGEVERSION     (0x00)
 
 /* defines for PowerManagementCapabilities field */
-#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x000001000)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x000000800)
-#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x000000400)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x000000200)
-#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x000000100)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x000000010)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x000000008)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x000000004)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x000000002)
-#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x000000001)
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD          (0x00001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD        (0x00000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
 
 
 
@@ -2266,6 +2388,7 @@
 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
 
 /* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE          (0x8000)
 #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
 #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 1f0c190..93d9b69 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2010 LSI Corporation.
+ *  Copyright (c) 2000-2011 LSI Corporation.
  *
  *
  *           Name:  mpi2_ioc.h
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.16
+ *  mpi2_ioc.h Version:  02.00.17
  *
  *  Version History
  *  ---------------
@@ -104,6 +104,12 @@
  *  05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
  *                      Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
  *  11-10-10  02.00.16  Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ *  02-23-11  02.00.17  Added SAS NOTIFY Primitive event, and added
+ *                      SASNotifyPrimitiveMasks field to
+ *                      MPI2_EVENT_NOTIFICATION_REQUEST.
+ *                      Added Temperature Threshold Event.
+ *                      Added Host Message Event.
+ *                      Added Send Host Message request and reply.
  *  --------------------------------------------------------------------------
  */
 
@@ -421,7 +427,7 @@
     U32                     Reserved6;                      /* 0x10 */
     U32                     EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
     U16                     SASBroadcastPrimitiveMasks;     /* 0x24 */
-    U16                     Reserved7;                      /* 0x26 */
+	 U16                     SASNotifyPrimitiveMasks;        /* 0x26 */
     U32                     Reserved8;                      /* 0x28 */
 } MPI2_EVENT_NOTIFICATION_REQUEST,
   MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
@@ -476,6 +482,9 @@
 #define MPI2_EVENT_GPIO_INTERRUPT                   (0x0023)
 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY         (0x0024)
 #define MPI2_EVENT_SAS_QUIESCE                      (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE             (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
 
 
 /* Log Entry Added Event data */
@@ -507,6 +516,39 @@
   MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
   Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
 
+/* Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+	U16         Status;                             /* 0x00 */
+	U8          SensorNum;                          /* 0x02 */
+	U8          Reserved1;                          /* 0x03 */
+	U16         CurrentTemperature;                 /* 0x04 */
+	U16         Reserved2;                          /* 0x06 */
+	U32         Reserved3;                          /* 0x08 */
+	U32         Reserved4;                          /* 0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
+Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
+
+/* Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED            (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED            (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED            (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED            (0x0001)
+
+
+/* Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+	U8          SourceVF_ID;                        /* 0x00 */
+	U8          Reserved1;                          /* 0x01 */
+	U16         Reserved2;                          /* 0x02 */
+	U32         Reserved3;                          /* 0x04 */
+	U32         HostData[1];                        /* 0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
+
+
 /* Hard Reset Received Event data */
 
 typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
@@ -749,6 +791,24 @@
 #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED               (0x07)
 #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED               (0x08)
 
+/* SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+	U8                      PhyNum;                     /* 0x00 */
+	U8                      Port;                       /* 0x01 */
+	U8                      Reserved1;                  /* 0x02 */
+	U8                      Primitive;                  /* 0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+Mpi2EventDataSasNotifyPrimitive_t,
+MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
+
+/* defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP                     (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED               (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1                         (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2                         (0x04)
+
 
 /* SAS Initiator Device Status Change Event data */
 
@@ -1001,6 +1061,53 @@
 
 
 /****************************************************************************
+*  SendHostMessage message
+****************************************************************************/
+
+/* SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+	U16                     HostDataLength;                 /* 0x00 */
+	U8                      ChainOffset;                    /* 0x02 */
+	U8                      Function;                       /* 0x03 */
+	U16                     Reserved1;                      /* 0x04 */
+	U8                      Reserved2;                      /* 0x06 */
+	U8                      MsgFlags;                       /* 0x07 */
+	U8                      VP_ID;                          /* 0x08 */
+	U8                      VF_ID;                          /* 0x09 */
+	U16                     Reserved3;                      /* 0x0A */
+	U8                      Reserved4;                      /* 0x0C */
+	U8                      DestVF_ID;                      /* 0x0D */
+	U16                     Reserved5;                      /* 0x0E */
+	U32                     Reserved6;                      /* 0x10 */
+	U32                     Reserved7;                      /* 0x14 */
+	U32                     Reserved8;                      /* 0x18 */
+	U32                     Reserved9;                      /* 0x1C */
+	U32                     Reserved10;                     /* 0x20 */
+	U32                     HostData[1];                    /* 0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
+
+
+/* SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+	U16                     HostDataLength;                 /* 0x00 */
+	U8                      MsgLength;                      /* 0x02 */
+	U8                      Function;                       /* 0x03 */
+	U16                     Reserved1;                      /* 0x04 */
+	U8                      Reserved2;                      /* 0x06 */
+	U8                      MsgFlags;                       /* 0x07 */
+	U8                      VP_ID;                          /* 0x08 */
+	U8                      VF_ID;                          /* 0x09 */
+	U16                     Reserved3;                      /* 0x0A */
+	U16                     Reserved4;                      /* 0x0C */
+	U16                     IOCStatus;                      /* 0x0E */
+	U32                     IOCLogInfo;                     /* 0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
+
+
+/****************************************************************************
 *  FWDownload message
 ****************************************************************************/
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 81209ca..beda04a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -81,6 +81,15 @@
 module_param_array(missing_delay, int, NULL, 0);
 MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
 
+static int mpt2sas_fwfault_debug;
+MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
+	"and halt firmware - (default=0)");
+
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
+
 /* diag_buffer_enable is bitwise
  * bit 0 set = TRACE
  * bit 1 set = SNAPSHOT
@@ -93,14 +102,6 @@
 MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
     "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
 
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
-    "and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
  *
@@ -691,6 +692,7 @@
 		memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 	}
 	ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
+
 	complete(&ioc->base_cmds.done);
 	return 1;
 }
@@ -3470,6 +3472,58 @@
 }
 
 /**
+ * mpt2sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ *        0 means the mf is freed from this function.
+ */
+u8
+mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply)
+{
+	MPI2DefaultReply_t *mpi_reply;
+	u16 ioc_status;
+
+	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+		return 1;
+
+	if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
+		return 1;
+
+	ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
+	if (mpi_reply) {
+		ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
+		memcpy(ioc->port_enable_cmds.reply, mpi_reply,
+		    mpi_reply->MsgLength*4);
+	}
+	ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
+
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		ioc->port_enable_failed = 1;
+
+	if (ioc->is_driver_loading) {
+		if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+			mpt2sas_port_enable_complete(ioc);
+			return 1;
+		} else {
+			ioc->start_scan_failed = ioc_status;
+			ioc->start_scan = 0;
+			return 1;
+		}
+	}
+	complete(&ioc->port_enable_cmds.done);
+	return 1;
+}
+
+
+/**
  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
  * @ioc: per adapter object
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3480,67 +3534,151 @@
 _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2PortEnableRequest_t *mpi_request;
-	u32 ioc_state;
+	Mpi2PortEnableReply_t *mpi_reply;
 	unsigned long timeleft;
 	int r = 0;
 	u16 smid;
+	u16 ioc_status;
 
 	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
 
-	if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
+	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
 		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
 		    ioc->name, __func__);
 		return -EAGAIN;
 	}
 
-	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
+	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
 		return -EAGAIN;
 	}
 
-	ioc->base_cmds.status = MPT2_CMD_PENDING;
+	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->base_cmds.smid = smid;
+	ioc->port_enable_cmds.smid = smid;
 	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-	mpi_request->VF_ID = 0; /* TODO */
-	mpi_request->VP_ID = 0;
 
+	init_completion(&ioc->port_enable_cmds.done);
 	mpt2sas_base_put_smid_default(ioc, smid);
-	init_completion(&ioc->base_cmds.done);
-	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+	timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
 	    300*HZ);
-	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
+	if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
 		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
 		    ioc->name, __func__);
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2PortEnableRequest_t)/4);
-		if (ioc->base_cmds.status & MPT2_CMD_RESET)
+		if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
 			r = -EFAULT;
 		else
 			r = -ETIME;
 		goto out;
-	} else
-		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
-		    ioc->name, __func__));
+	}
+	mpi_reply = ioc->port_enable_cmds.reply;
 
-	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
-	    60, sleep_flag);
-	if (ioc_state) {
-		printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
-		    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
+	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
+		    ioc->name, __func__, ioc_status);
 		r = -EFAULT;
+		goto out;
 	}
  out:
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-	printk(MPT2SAS_INFO_FMT "port enable: %s\n",
-	    ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+	printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+	    "SUCCESS" : "FAILED"));
 	return r;
 }
 
 /**
+ * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
+{
+	Mpi2PortEnableRequest_t *mpi_request;
+	u16 smid;
+
+	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
+
+	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	if (!smid) {
+		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+		    ioc->name, __func__);
+		return -EAGAIN;
+	}
+
+	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
+	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+	ioc->port_enable_cmds.smid = smid;
+	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+	mpt2sas_base_put_smid_default(ioc, smid);
+	return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
+{
+	/* We wait for discovery to complete if IR firmware is loaded.
+	 * The sas topology events arrive before PD events, so we need time to
+	 * turn on the bit in ioc->pd_handles to indicate PD
+	 * Also, it maybe required to report Volumes ahead of physical
+	 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+	 */
+	if (ioc->ir_firmware)
+		return 1;
+
+	/* if no Bios, then we don't need to wait */
+	if (!ioc->bios_pg3.BiosVersion)
+		return 0;
+
+	/* Bios is present, then we drop down here.
+	 *
+	 * If there any entries in the Bios Page 2, then we wait
+	 * for discovery to complete.
+	 */
+
+	/* Current Boot Device */
+	if ((ioc->bios_pg2.CurrentBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Request Boot Device */
+	   (ioc->bios_pg2.ReqBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+	/* Alternate Request Boot Device */
+	   (ioc->bios_pg2.ReqAltBootDeviceForm &
+	    MPI2_BIOSPAGE2_FORM_MASK) ==
+	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+		return 0;
+
+	return 1;
+}
+
+
+/**
  * _base_unmask_events - turn on notification for this event
  * @ioc: per adapter object
  * @event: firmware event
@@ -3962,6 +4100,7 @@
  skip_init_reply_post_host_index:
 
 	_base_unmask_interrupts(ioc);
+
 	r = _base_event_notification(ioc, sleep_flag);
 	if (r)
 		return r;
@@ -3969,7 +4108,18 @@
 	if (sleep_flag == CAN_SLEEP)
 		_base_static_config_pages(ioc);
 
-	if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
+
+	if (ioc->is_driver_loading) {
+
+
+
+		ioc->wait_for_discovery_to_complete =
+		    _base_determine_wait_on_discovery(ioc);
+		return r; /* scan_start and scan_finished support */
+	}
+
+
+	if (ioc->wait_for_discovery_to_complete && ioc->is_warpdrive) {
 		if (ioc->manu_pg10.OEMIdentifier  == 0x80) {
 			hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
 			    MFG_PAGE10_HIDE_SSDS_MASK);
@@ -3978,13 +4128,6 @@
 		}
 	}
 
-	if (ioc->wait_for_port_enable_to_complete) {
-		if (diag_buffer_enable != 0)
-			mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
-		if (disable_discovery > 0)
-			return r;
-	}
-
 	r = _base_send_port_enable(ioc, sleep_flag);
 	if (r)
 		return r;
@@ -4121,6 +4264,10 @@
 	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
 
+	/* port_enable command bits */
+	ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+
 	/* transport internal command bits */
 	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
@@ -4162,8 +4309,6 @@
 		goto out_free_resources;
 	}
 
-	init_completion(&ioc->shost_recovery_done);
-
 	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
 		ioc->event_masks[i] = -1;
 
@@ -4186,7 +4331,6 @@
 		_base_update_missing_delay(ioc, missing_delay[0],
 		    missing_delay[1]);
 
-	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 
  out_free_resources:
@@ -4204,6 +4348,7 @@
 	kfree(ioc->scsih_cmds.reply);
 	kfree(ioc->config_cmds.reply);
 	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->pfacts);
@@ -4243,6 +4388,7 @@
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->base_cmds.reply);
+	kfree(ioc->port_enable_cmds.reply);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
 	kfree(ioc->scsih_cmds.reply);
@@ -4284,6 +4430,20 @@
 			mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
 			complete(&ioc->base_cmds.done);
 		}
+		if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+			ioc->port_enable_failed = 1;
+			ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
+			mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+			if (ioc->is_driver_loading) {
+				ioc->start_scan_failed =
+				    MPI2_IOCSTATUS_INTERNAL_ERROR;
+				ioc->start_scan = 0;
+				ioc->port_enable_cmds.status =
+						MPT2_CMD_NOT_USED;
+			} else
+				complete(&ioc->port_enable_cmds.done);
+
+		}
 		if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
 			ioc->config_cmds.status |= MPT2_CMD_RESET;
 			mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
@@ -4349,7 +4509,6 @@
 {
 	int r;
 	unsigned long flags;
-	u8 pe_complete = ioc->wait_for_port_enable_to_complete;
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
@@ -4396,7 +4555,8 @@
 	/* If this hard reset is called while port enable is active, then
 	 * there is no reason to call make_ioc_operational
 	 */
-	if (pe_complete) {
+	if (ioc->is_driver_loading && ioc->port_enable_failed) {
+		ioc->remove_host = 1;
 		r = -EFAULT;
 		goto out;
 	}
@@ -4410,7 +4570,6 @@
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 	ioc->ioc_reset_in_progress_status = r;
 	ioc->shost_recovery = 0;
-	complete(&ioc->shost_recovery_done);
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 	mutex_unlock(&ioc->reset_in_progress_mutex);
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 59354db..3c3babc 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"09.100.00.01"
-#define MPT2SAS_MAJOR_VERSION		09
+#define MPT2SAS_DRIVER_VERSION		"10.100.00.00"
+#define MPT2SAS_MAJOR_VERSION		10
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
-#define MPT2SAS_RELEASE_VERSION		01
+#define MPT2SAS_RELEASE_VERSION		00
 
 /*
  * Set MPT2SAS_SG_DEPTH value based on user input.
@@ -655,7 +655,12 @@
  * @ignore_loginfos: ignore loginfos during task management
  * @remove_host: flag for when driver unloads, to avoid sending dev resets
  * @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_port_enable_to_complete:
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ *                                               waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
  * @msix_enable: flag indicating msix is enabled
  * @msix_vector_count: number msix vectors
  * @cpu_msix_table: table for mapping cpus to msix index
@@ -790,15 +795,20 @@
 	u8		shost_recovery;
 
 	struct mutex	reset_in_progress_mutex;
-	struct completion	shost_recovery_done;
 	spinlock_t 	ioc_reset_in_progress_lock;
 	u8		ioc_link_reset_in_progress;
-	int		ioc_reset_in_progress_status;
+	u8		ioc_reset_in_progress_status;
 
 	u8		ignore_loginfos;
 	u8		remove_host;
 	u8		pci_error_recovery;
-	u8		wait_for_port_enable_to_complete;
+	u8		wait_for_discovery_to_complete;
+	struct completion	port_enable_done;
+	u8		is_driver_loading;
+	u8		port_enable_failed;
+
+	u8		start_scan;
+	u16		start_scan_failed;
 
 	u8		msix_enable;
 	u16		msix_vector_count;
@@ -814,11 +824,13 @@
 	u8		scsih_cb_idx;
 	u8		ctl_cb_idx;
 	u8		base_cb_idx;
+	u8		port_enable_cb_idx;
 	u8		config_cb_idx;
 	u8		tm_tr_cb_idx;
 	u8		tm_tr_volume_cb_idx;
 	u8		tm_sas_control_cb_idx;
 	struct _internal_cmd base_cmds;
+	struct _internal_cmd port_enable_cmds;
 	struct _internal_cmd transport_cmds;
 	struct _internal_cmd scsih_cmds;
 	struct _internal_cmd tm_cmds;
@@ -1001,6 +1013,8 @@
 
 u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
     u32 reply);
+u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index,	u32 reply);
 void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
 
 u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
@@ -1015,6 +1029,8 @@
 
 void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
 
+int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
+
 /* scsih shared API */
 u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
     u32 reply);
@@ -1032,6 +1048,8 @@
 struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
     struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
 
+void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
+
 void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
 
 /* config shared API */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 2b11010..36ea0b2 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -1356,6 +1356,9 @@
 	Mpi2ConfigReply_t mpi_reply;
 	int r, i, config_page_sz;
 	u16 ioc_status;
+	int config_num;
+	u16 element_type;
+	u16 phys_disk_dev_handle;
 
 	*volume_handle = 0;
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
@@ -1371,35 +1374,53 @@
 	if (r)
 		goto out;
 
-	mpi_request.PageAddress =
-	    cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG);
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
 	config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
 	config_page = kmalloc(config_page_sz, GFP_KERNEL);
-	if (!config_page)
+	if (!config_page) {
+		r = -1;
 		goto out;
-	r = _config_request(ioc, &mpi_request, &mpi_reply,
-	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    config_page_sz);
-	if (r)
-		goto out;
-
-	r = -1;
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-		goto out;
-	for (i = 0; i < config_page->NumElements; i++) {
-		if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) &
-		    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) !=
-		    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT)
-			continue;
-		if (le16_to_cpu(config_page->ConfigElement[i].
-		    PhysDiskDevHandle) == pd_handle) {
-			*volume_handle = le16_to_cpu(config_page->
-			    ConfigElement[i].VolDevHandle);
-			r = 0;
+	}
+	config_num = 0xff;
+	while (1) {
+		mpi_request.PageAddress = cpu_to_le32(config_num +
+		    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
+		r = _config_request(ioc, &mpi_request, &mpi_reply,
+		    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+		    config_page_sz);
+		if (r)
 			goto out;
+		r = -1;
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+			goto out;
+		for (i = 0; i < config_page->NumElements; i++) {
+			element_type = le16_to_cpu(config_page->
+			    ConfigElement[i].ElementFlags) &
+			    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
+			if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
+			    element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
+				phys_disk_dev_handle =
+				    le16_to_cpu(config_page->ConfigElement[i].
+				    PhysDiskDevHandle);
+				if (phys_disk_dev_handle == pd_handle) {
+					*volume_handle =
+					    le16_to_cpu(config_page->
+					    ConfigElement[i].VolDevHandle);
+					r = 0;
+					goto out;
+				}
+			} else if (element_type ==
+			    MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
+				*volume_handle = 0;
+				r = 0;
+				goto out;
+			}
 		}
+		config_num = config_page->ConfigNum;
 	}
  out:
 	kfree(config_page);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 9adb013..aabcb91 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1207,6 +1207,9 @@
 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 		return -ENODEV;
 
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+		ioc->is_driver_loading)
+		return -EAGAIN;
 	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
@@ -2178,7 +2181,8 @@
 		    !ioc)
 			return -ENODEV;
 
-		if (ioc->shost_recovery || ioc->pci_error_recovery)
+		if (ioc->shost_recovery || ioc->pci_error_recovery ||
+				ioc->is_driver_loading)
 			return -EAGAIN;
 
 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
@@ -2297,7 +2301,8 @@
 	if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
 		return -ENODEV;
 
-	if (ioc->shost_recovery || ioc->pci_error_recovery)
+	if (ioc->shost_recovery || ioc->pci_error_recovery ||
+			ioc->is_driver_loading)
 		return -EAGAIN;
 
 	memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 1da1aa1..4e041f6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -71,6 +71,9 @@
 
 static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 
+static void _scsih_scan_start(struct Scsi_Host *shost);
+static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
+
 /* global parameters */
 LIST_HEAD(mpt2sas_ioc_list);
 
@@ -79,6 +82,7 @@
 static u8 tm_cb_idx = -1;
 static u8 ctl_cb_idx = -1;
 static u8 base_cb_idx = -1;
+static u8 port_enable_cb_idx = -1;
 static u8 transport_cb_idx = -1;
 static u8 scsih_cb_idx = -1;
 static u8 config_cb_idx = -1;
@@ -103,6 +107,18 @@
 module_param(max_lun, int, 0);
 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
 
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable = -1;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
+	"(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+
 /**
  * struct sense_info - common structure for obtaining sense keys
  * @skey: sense key
@@ -117,8 +133,8 @@
 
 
 #define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC)
-#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
-
+#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
+#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
 /**
  * struct fw_event_work - firmware event struct
  * @list: link list framework
@@ -372,31 +388,34 @@
 	Mpi2SasDevicePage0_t sas_device_pg0;
 	Mpi2ConfigReply_t mpi_reply;
 	u32 ioc_status;
+	*sas_address = 0;
 
 	if (handle <= ioc->sas_hba.num_phys) {
 		*sas_address = ioc->sas_hba.sas_address;
 		return 0;
-	} else
-		*sas_address = 0;
+	}
 
 	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
+		__FILE__, __LINE__, __func__);
 		return -ENXIO;
 	}
 
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-	    MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
-		    "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
-		     __FILE__, __LINE__, __func__);
-		return -EIO;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+		*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+		return 0;
 	}
 
-	*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-	return 0;
+	/* we hit this becuase the given parent handle doesn't exist */
+	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+		return -ENXIO;
+	/* else error case */
+	printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
+	    "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+	     __FILE__, __LINE__, __func__);
+	return -EIO;
 }
 
 /**
@@ -424,7 +443,11 @@
 	u16 slot;
 
 	 /* only process this function when driver loads */
-	if (!ioc->wait_for_port_enable_to_complete)
+	if (!ioc->is_driver_loading)
+		return;
+
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
 		return;
 
 	if (!is_raid) {
@@ -587,8 +610,15 @@
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-	     sas_device->sas_address_parent))
+	     sas_device->sas_address_parent)) {
 		_scsih_sas_device_remove(ioc, sas_device);
+		} else if (!sas_device->starget) {
+			if (!ioc->is_driver_loading)
+				mpt2sas_transport_port_remove(ioc,
+				sas_device->sas_address,
+			    sas_device->sas_address_parent);
+			_scsih_sas_device_remove(ioc, sas_device);
+		}
 }
 
 /**
@@ -1400,6 +1430,10 @@
 {
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
+	struct Scsi_Host *shost;
+	struct MPT2SAS_ADAPTER *ioc;
+	struct _sas_device *sas_device;
+	unsigned long flags;
 
 	if (!sdev->hostdata)
 		return;
@@ -1407,6 +1441,19 @@
 	starget = scsi_target(sdev);
 	sas_target_priv_data = starget->hostdata;
 	sas_target_priv_data->num_luns--;
+
+	shost = dev_to_shost(&starget->dev);
+	ioc = shost_priv(shost);
+
+	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+		   sas_target_priv_data->sas_address);
+		if (sas_device)
+			sas_device->starget = NULL;
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	}
+
 	kfree(sdev->hostdata);
 	sdev->hostdata = NULL;
 }
@@ -1598,8 +1645,10 @@
  * _scsih_get_volume_capabilities - volume capabilities
  * @ioc: per adapter object
  * @sas_device: the raid_device object
+ *
+ * Returns 0 for success, else 1
  */
-static void
+static int
 _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
     struct _raid_device *raid_device)
 {
@@ -1612,9 +1661,10 @@
 
 	if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
 	    &num_pds)) || !num_pds) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
+		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
 	}
 
 	raid_device->num_pds = num_pds;
@@ -1622,17 +1672,19 @@
 	    sizeof(Mpi2RaidVol0PhysDisk_t));
 	vol_pg0 = kzalloc(sz, GFP_KERNEL);
 	if (!vol_pg0) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
-		return;
+		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
 	}
 
 	if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
 	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-		    ioc->name, __FILE__, __LINE__, __func__);
+		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
 		kfree(vol_pg0);
-		return;
+		return 1;
 	}
 
 	raid_device->volume_type = vol_pg0->VolumeType;
@@ -1652,6 +1704,7 @@
 	}
 
 	kfree(vol_pg0);
+	return 0;
 }
 /**
  * _scsih_disable_ddio - Disable direct I/O for all the volumes
@@ -1922,13 +1975,20 @@
 		     sas_target_priv_data->handle);
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 		if (!raid_device) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			return 0;
+			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
 		}
 
 		_scsih_get_volume_capabilities(ioc, raid_device);
 
+		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
+			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
+			    __LINE__, __func__));
+			return 1;
+		}
 		/*
 		 * WARPDRIVE: Initialize the required data for Direct IO
 		 */
@@ -2002,11 +2062,22 @@
 	if (sas_device) {
 		if (sas_target_priv_data->flags &
 		    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-			mpt2sas_config_get_volume_handle(ioc,
-			    sas_device->handle, &sas_device->volume_handle);
-			mpt2sas_config_get_volume_wwid(ioc,
+			if (mpt2sas_config_get_volume_handle(ioc,
+			    sas_device->handle, &sas_device->volume_handle)) {
+				dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+				    "failure at %s:%d/%s()!\n", ioc->name,
+				    __FILE__, __LINE__, __func__));
+				return 1;
+			}
+			if (sas_device->volume_handle &&
+			    mpt2sas_config_get_volume_wwid(ioc,
 			    sas_device->volume_handle,
-			    &sas_device->volume_wwid);
+			    &sas_device->volume_wwid)) {
+				dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+				    "failure at %s:%d/%s()!\n", ioc->name,
+				    __FILE__, __LINE__, __func__));
+				return 1;
+			}
 		}
 		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
 			qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
@@ -2035,6 +2106,11 @@
 
 		if (!ssp_target)
 			_scsih_display_sata_capabilities(ioc, sas_device, sdev);
+	} else {
+		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
+		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
+		    __func__));
+		return 1;
 	}
 
 	_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
@@ -2714,22 +2790,43 @@
 
 
 /**
- * _scsih_queue_rescan - queue a topology rescan from user context
+ * _scsih_error_recovery_delete_devices - remove devices not responding
  * @ioc: per adapter object
  *
  * Return nothing.
  */
 static void
-_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
+_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
 {
 	struct fw_event_work *fw_event;
 
-	if (ioc->wait_for_port_enable_to_complete)
+	if (ioc->is_driver_loading)
 		return;
+
 	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
 	if (!fw_event)
 		return;
-	fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
+
+	fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
+	fw_event->ioc = ioc;
+	_scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * mpt2sas_port_enable_complete - port enable completed (fake event)
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
+{
+	struct fw_event_work *fw_event;
+
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+	fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
 }
@@ -2977,14 +3074,27 @@
 	Mpi2SCSITaskManagementRequest_t *mpi_request;
 	u16 smid;
 	struct _sas_device *sas_device;
-	struct MPT2SAS_TARGET *sas_target_priv_data;
+	struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
+	u64 sas_address = 0;
 	unsigned long flags;
 	struct _tr_list *delayed_tr;
+	u32 ioc_state;
 
-	if (ioc->shost_recovery || ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
-		   "progress!\n", __func__, ioc->name));
+	if (ioc->remove_host) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+		    "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
+		return;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+		    "error recovery: handle(0x%04x)\n", __func__, ioc->name,
+		    handle));
+		return;
+	}
+	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+		   "operational: handle(0x%04x)\n", __func__, ioc->name,
+		   handle));
 		return;
 	}
 
@@ -2998,13 +3108,18 @@
 	     sas_device->starget->hostdata) {
 		sas_target_priv_data = sas_device->starget->hostdata;
 		sas_target_priv_data->deleted = 1;
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
-		    "setting delete flag: handle(0x%04x), "
-		    "sas_addr(0x%016llx)\n", ioc->name, handle,
-		    (unsigned long long) sas_device->sas_address));
+		sas_address = sas_device->sas_address;
 	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
+	if (sas_target_priv_data) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
+		"handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
+			(unsigned long long)sas_address));
+		_scsih_ublock_io_device(ioc, handle);
+		sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
+	}
+
 	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
 	if (!smid) {
 		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
@@ -3185,11 +3300,21 @@
 	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	Mpi2SasIoUnitControlRequest_t *mpi_request;
 	u16 smid_sas_ctrl;
+	u32 ioc_state;
 
-	if (ioc->shost_recovery || ioc->remove_host ||
-	    ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
-		   "progress!\n", __func__, ioc->name));
+	if (ioc->remove_host) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
+		   "removed\n", __func__, ioc->name));
+		return 1;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
+		    "error recovery\n", __func__, ioc->name));
+		return 1;
+	}
+	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
+		    "operational\n", __func__, ioc->name));
 		return 1;
 	}
 
@@ -5099,7 +5224,7 @@
 	/* get device name */
 	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
 
-	if (ioc->wait_for_port_enable_to_complete)
+	if (ioc->wait_for_discovery_to_complete)
 		_scsih_sas_device_init_add(ioc, sas_device);
 	else
 		_scsih_sas_device_add(ioc, sas_device);
@@ -5135,6 +5260,9 @@
 	if (sas_device_backup.starget && sas_device_backup.starget->hostdata) {
 		sas_target_priv_data = sas_device_backup.starget->hostdata;
 		sas_target_priv_data->deleted = 1;
+		_scsih_ublock_io_device(ioc, sas_device_backup.handle);
+		sas_target_priv_data->handle =
+		     MPT2SAS_INVALID_DEVICE_HANDLE;
 	}
 
 	_scsih_ublock_io_device(ioc, sas_device_backup.handle);
@@ -5288,7 +5416,7 @@
 		_scsih_sas_topology_change_event_debug(ioc, event_data);
 #endif
 
-	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
+	if (ioc->remove_host || ioc->pci_error_recovery)
 		return;
 
 	if (!ioc->sas_hba.num_phys)
@@ -5349,6 +5477,9 @@
 		switch (reason_code) {
 		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
 
+			if (ioc->shost_recovery)
+				break;
+
 			if (link_rate == prev_link_rate)
 				break;
 
@@ -5362,6 +5493,9 @@
 			break;
 		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
 
+			if (ioc->shost_recovery)
+				break;
+
 			mpt2sas_transport_update_links(ioc, sas_address,
 			    handle, phy_number, link_rate);
 
@@ -5622,7 +5756,7 @@
 	termination_count = 0;
 	query_count = 0;
 	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
-		if (ioc->ioc_reset_in_progress_status)
+		if (ioc->shost_recovery)
 			goto out;
 		scmd = _scsih_scsi_lookup_get(ioc, smid);
 		if (!scmd)
@@ -5644,7 +5778,7 @@
 		lun = sas_device_priv_data->lun;
 		query_count++;
 
-		if (ioc->ioc_reset_in_progress_status)
+		if (ioc->shost_recovery)
 			goto out;
 
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -5686,7 +5820,7 @@
 			goto broadcast_aen_retry;
 		}
 
-		if (ioc->ioc_reset_in_progress_status)
+		if (ioc->shost_recovery)
 			goto out_no_lock;
 
 		r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
@@ -5725,7 +5859,7 @@
 	    ioc->name, __func__, query_count, termination_count));
 
 	ioc->broadcast_aen_busy = 0;
-	if (!ioc->ioc_reset_in_progress_status)
+	if (!ioc->shost_recovery)
 		_scsih_ublock_io_all_device(ioc);
 	mutex_unlock(&ioc->tm_cmds.mutex);
 }
@@ -5789,8 +5923,11 @@
 static void
 _scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
 {
-	struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
 
+	if (starget == NULL)
+		return;
+	sas_target_priv_data = starget->hostdata;
 	if (no_uld_attach)
 		sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
 	else
@@ -5845,7 +5982,7 @@
 	raid_device->handle = handle;
 	raid_device->wwid = wwid;
 	_scsih_raid_device_add(ioc, raid_device);
-	if (!ioc->wait_for_port_enable_to_complete) {
+	if (!ioc->wait_for_discovery_to_complete) {
 		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
 		    raid_device->id, 0);
 		if (rc)
@@ -6127,6 +6264,10 @@
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
 #endif
+
+	if (ioc->shost_recovery)
+		return;
+
 	foreign_config = (le32_to_cpu(event_data->Flags) &
 	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
 
@@ -6185,6 +6326,9 @@
 	int rc;
 	Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
 
+	if (ioc->shost_recovery)
+		return;
+
 	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
 		return;
 
@@ -6267,6 +6411,9 @@
 	Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
 	u64 sas_address;
 
+	if (ioc->shost_recovery)
+		return;
+
 	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
 		return;
 
@@ -6510,10 +6657,10 @@
 	u32 device_info;
 	u16 slot;
 
-	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+	printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
 
 	if (list_empty(&ioc->sas_device_list))
-		return;
+		goto out;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -6532,6 +6679,9 @@
 		_scsih_mark_responding_sas_device(ioc, sas_address, slot,
 		    handle);
 	}
+out:
+	printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
+	    ioc->name);
 }
 
 /**
@@ -6607,10 +6757,14 @@
 	u16 handle;
 	u8 phys_disk_num;
 
-	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+	if (!ioc->ir_firmware)
+		return;
+
+	printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
+	    ioc->name);
 
 	if (list_empty(&ioc->raid_device_list))
-		return;
+		goto out;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -6649,6 +6803,9 @@
 			set_bit(handle, ioc->pd_handles);
 		}
 	}
+out:
+	printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
+	    "complete\n", ioc->name);
 }
 
 /**
@@ -6708,10 +6865,10 @@
 	u64 sas_address;
 	u16 handle;
 
-	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+	printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
 
 	if (list_empty(&ioc->sas_expander_list))
-		return;
+		goto out;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -6730,6 +6887,8 @@
 		_scsih_mark_responding_expander(ioc, sas_address, handle);
 	}
 
+ out:
+	printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
 }
 
 /**
@@ -6745,6 +6904,8 @@
 	struct _sas_node *sas_expander;
 	struct _raid_device *raid_device, *raid_device_next;
 
+	printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
+	    ioc->name);
 
 	list_for_each_entry_safe(sas_device, sas_device_next,
 	    &ioc->sas_device_list, list) {
@@ -6764,6 +6925,9 @@
 		_scsih_remove_device(ioc, sas_device);
 	}
 
+	if (!ioc->ir_firmware)
+		goto retry_expander_search;
+
 	list_for_each_entry_safe(raid_device, raid_device_next,
 	    &ioc->raid_device_list, list) {
 		if (raid_device->responding) {
@@ -6790,52 +6954,170 @@
 		mpt2sas_expander_remove(ioc, sas_expander->sas_address);
 		goto retry_expander_search;
 	}
+	printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
+	    ioc->name);
+	/* unblock devices */
+	_scsih_ublock_io_all_device(ioc);
+}
+
+static void
+_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
+	struct _sas_node *sas_expander, u16 handle)
+{
+	Mpi2ExpanderPage1_t expander_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	int i;
+
+	for (i = 0 ; i < sas_expander->num_phys ; i++) {
+		if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
+		    &expander_pg1, i, handle))) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
+		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
+		    expander_pg1.NegotiatedLinkRate >> 4);
+	}
 }
 
 /**
- * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
+ * _scsih_scan_for_devices_after_reset - scan for devices after host reset
  * @ioc: per adapter object
  *
  * Return nothing.
  */
 static void
-_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
 {
-	struct _sas_device *sas_device, *sas_device_next;
+	Mpi2ExpanderPage0_t expander_pg0;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	Mpi2RaidVolPage1_t volume_pg1;
+	Mpi2RaidVolPage0_t volume_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2EventIrConfigElement_t element;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 phys_disk_num;
+	u16 ioc_status;
+	u16 handle, parent_handle;
+	u64 sas_address;
+	struct _sas_device *sas_device;
+	struct _sas_node *expander_device;
+	static struct _raid_device *raid_device;
 
-	if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
-	    MFG_PAGE10_HIDE_IF_VOL_PRESENT)
-		return;
+	printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
 
-	if (ioc->hide_drives) {
-		if (_scsih_get_num_volumes(ioc))
-			return;
-		ioc->hide_drives = 0;
-		list_for_each_entry_safe(sas_device, sas_device_next,
-		    &ioc->sas_device_list, list) {
-			if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-				sas_device->sas_address_parent)) {
-				_scsih_sas_device_remove(ioc, sas_device);
-			} else if (!sas_device->starget) {
-				mpt2sas_transport_port_remove(ioc,
-				    sas_device->sas_address,
-				    sas_device->sas_address_parent);
-				_scsih_sas_device_remove(ioc, sas_device);
-			}
-		}
-	} else {
-		if (!_scsih_get_num_volumes(ioc))
-			return;
-		ioc->hide_drives = 1;
-		list_for_each_entry_safe(sas_device, sas_device_next,
-		    &ioc->sas_device_list, list) {
-			mpt2sas_transport_port_remove(ioc,
-			    sas_device->sas_address,
-			    sas_device->sas_address_parent);
+	_scsih_sas_host_refresh(ioc);
+
+	/* expanders */
+	handle = 0xFFFF;
+	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(expander_pg0.DevHandle);
+		expander_device = mpt2sas_scsih_expander_find_by_sas_address(
+		    ioc, le64_to_cpu(expander_pg0.SASAddress));
+		if (expander_device)
+			_scsih_refresh_expander_links(ioc, expander_device,
+			    handle);
+		else
+			_scsih_expander_add(ioc, handle);
+	}
+
+	if (!ioc->ir_firmware)
+		goto skip_to_sas;
+
+	/* phys disk */
+	phys_disk_num = 0xFF;
+	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+	    phys_disk_num))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		phys_disk_num = pd_pg0.PhysDiskNum;
+		handle = le16_to_cpu(pd_pg0.DevHandle);
+		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+		if (sas_device)
+			continue;
+		if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle) != 0)
+			continue;
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle,
+		    &sas_address)) {
+			mpt2sas_transport_update_links(ioc, sas_address,
+			    handle, sas_device_pg0.PhyNum,
+			    MPI2_SAS_NEG_LINK_RATE_1_5);
+			set_bit(handle, ioc->pd_handles);
+			_scsih_add_device(ioc, handle, 0, 1);
 		}
 	}
+
+	/* volumes */
+	handle = 0xFFFF;
+	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(volume_pg1.DevHandle);
+		raid_device = _scsih_raid_device_find_by_wwid(ioc,
+		    le64_to_cpu(volume_pg1.WWID));
+		if (raid_device)
+			continue;
+		if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
+		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
+		     sizeof(Mpi2RaidVolPage0_t)))
+			continue;
+		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
+		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
+			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
+			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
+			element.VolDevHandle = volume_pg1.DevHandle;
+			_scsih_sas_volume_add(ioc, &element);
+		}
+	}
+
+ skip_to_sas:
+
+	/* sas devices */
+	handle = 0xFFFF;
+	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+	    handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(sas_device_pg0.DevHandle);
+		if (!(_scsih_is_end_device(
+		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
+			continue;
+		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+		    le64_to_cpu(sas_device_pg0.SASAddress));
+		if (sas_device)
+			continue;
+		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+			mpt2sas_transport_update_links(ioc, sas_address, handle,
+			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+			_scsih_add_device(ioc, handle, 0, 0);
+		}
+	}
+
+	printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
 }
 
+
 /**
  * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
  * @ioc: per adapter object
@@ -6871,7 +7153,6 @@
 		}
 		_scsih_fw_event_cleanup_queue(ioc);
 		_scsih_flush_running_cmds(ioc);
-		_scsih_queue_rescan(ioc);
 		break;
 	case MPT2_IOC_DONE_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
@@ -6881,6 +7162,13 @@
 		_scsih_search_responding_sas_devices(ioc);
 		_scsih_search_responding_raid_devices(ioc);
 		_scsih_search_responding_expanders(ioc);
+		if (!ioc->is_driver_loading) {
+			_scsih_prep_device_scan(ioc);
+			_scsih_search_responding_sas_devices(ioc);
+			_scsih_search_responding_raid_devices(ioc);
+			_scsih_search_responding_expanders(ioc);
+			_scsih_error_recovery_delete_devices(ioc);
+		}
 		break;
 	}
 }
@@ -6898,7 +7186,6 @@
 {
 	struct fw_event_work *fw_event = container_of(work,
 	    struct fw_event_work, delayed_work.work);
-	unsigned long flags;
 	struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
 
 	/* the queue is being flushed so ignore this event */
@@ -6908,23 +7195,21 @@
 		return;
 	}
 
-	if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
-		_scsih_fw_event_free(ioc, fw_event);
-		spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-		if (ioc->shost_recovery) {
-			init_completion(&ioc->shost_recovery_done);
-			spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
-			    flags);
-			wait_for_completion(&ioc->shost_recovery_done);
-		} else
-			spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
-			    flags);
-		_scsih_remove_unresponding_sas_devices(ioc);
-		_scsih_hide_unhide_sas_devices(ioc);
-		return;
-	}
-
 	switch (fw_event->event) {
+	case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
+		while (scsi_host_in_recovery(ioc->shost))
+			ssleep(1);
+		_scsih_remove_unresponding_sas_devices(ioc);
+		_scsih_scan_for_devices_after_reset(ioc);
+		break;
+	case MPT2SAS_PORT_ENABLE_COMPLETE:
+		ioc->start_scan = 0;
+
+
+
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
+		    "from worker thread\n", ioc->name));
+		break;
 	case MPT2SAS_TURN_ON_FAULT_LED:
 		_scsih_turn_on_fault_led(ioc, fw_event->device_handle);
 		break;
@@ -7121,6 +7406,8 @@
 	.slave_configure		= _scsih_slave_configure,
 	.target_destroy			= _scsih_target_destroy,
 	.slave_destroy			= _scsih_slave_destroy,
+	.scan_finished			= _scsih_scan_finished,
+	.scan_start			= _scsih_scan_start,
 	.change_queue_depth 		= _scsih_change_queue_depth,
 	.change_queue_type		= _scsih_change_queue_type,
 	.eh_abort_handler		= _scsih_abort,
@@ -7381,7 +7668,12 @@
 	unsigned long flags;
 	int rc;
 
+	 /* no Bios, return immediately */
+	if (!ioc->bios_pg3.BiosVersion)
+		return;
+
 	device = NULL;
+	is_raid = 0;
 	if (ioc->req_boot_device.device) {
 		device =  ioc->req_boot_device.device;
 		is_raid = ioc->req_boot_device.is_raid;
@@ -7417,8 +7709,9 @@
 		    sas_device->sas_address_parent)) {
 			_scsih_sas_device_remove(ioc, sas_device);
 		} else if (!sas_device->starget) {
-			mpt2sas_transport_port_remove(ioc, sas_address,
-			    sas_address_parent);
+			if (!ioc->is_driver_loading)
+				mpt2sas_transport_port_remove(ioc, sas_address,
+					sas_address_parent);
 			_scsih_sas_device_remove(ioc, sas_device);
 		}
 	}
@@ -7462,22 +7755,28 @@
 	/* SAS Device List */
 	list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
 	    list) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		list_move_tail(&sas_device->list, &ioc->sas_device_list);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 		if (ioc->hide_drives)
 			continue;
 
 		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
 		    sas_device->sas_address_parent)) {
-			_scsih_sas_device_remove(ioc, sas_device);
+			list_del(&sas_device->list);
+			kfree(sas_device);
+			continue;
 		} else if (!sas_device->starget) {
-			mpt2sas_transport_port_remove(ioc,
-			    sas_device->sas_address,
-			    sas_device->sas_address_parent);
-			_scsih_sas_device_remove(ioc, sas_device);
+			if (!ioc->is_driver_loading)
+				mpt2sas_transport_port_remove(ioc,
+					sas_device->sas_address,
+					sas_device->sas_address_parent);
+			list_del(&sas_device->list);
+			kfree(sas_device);
+			continue;
+
 		}
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 }
 
@@ -7490,9 +7789,7 @@
 static void
 _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
 {
-	u16 volume_mapping_flags =
-	    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
-	    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+	u16 volume_mapping_flags;
 
 	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
 		return;  /* return when IOC doesn't support initiator mode */
@@ -7500,18 +7797,93 @@
 	_scsih_probe_boot_devices(ioc);
 
 	if (ioc->ir_firmware) {
-		if ((volume_mapping_flags &
-		     MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
-			_scsih_probe_sas(ioc);
+		volume_mapping_flags =
+		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+		if (volume_mapping_flags ==
+		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
 			_scsih_probe_raid(ioc);
+			_scsih_probe_sas(ioc);
 		} else {
-			_scsih_probe_raid(ioc);
 			_scsih_probe_sas(ioc);
+			_scsih_probe_raid(ioc);
 		}
 	} else
 		_scsih_probe_sas(ioc);
 }
 
+
+/**
+ * _scsih_scan_start - scsi lld callback for .scan_start
+ * @shost: SCSI host pointer
+ *
+ * The shost has the ability to discover targets on its own instead
+ * of scanning the entire bus.  In our implemention, we will kick off
+ * firmware discovery.
+ */
+static void
+_scsih_scan_start(struct Scsi_Host *shost)
+{
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+	int rc;
+
+	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
+		mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
+
+	ioc->start_scan = 1;
+	rc = mpt2sas_port_enable(ioc);
+
+	if (rc != 0)
+		printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
+}
+
+/**
+ * _scsih_scan_finished - scsi lld callback for .scan_finished
+ * @shost: SCSI host pointer
+ * @time: elapsed time of the scan in jiffies
+ *
+ * This function will be called periodically until it returns 1 with the
+ * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * we wait for firmware discovery to complete, then return 1.
+ */
+static int
+_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if (time >= (300 * HZ)) {
+		ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+		printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
+		    "(timeout=300s)\n", ioc->name);
+		ioc->is_driver_loading = 0;
+		return 1;
+	}
+
+	if (ioc->start_scan)
+		return 0;
+
+	if (ioc->start_scan_failed) {
+		printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
+		    "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
+		ioc->is_driver_loading = 0;
+		ioc->wait_for_discovery_to_complete = 0;
+		ioc->remove_host = 1;
+		return 1;
+	}
+
+	printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
+	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+
+	if (ioc->wait_for_discovery_to_complete) {
+		ioc->wait_for_discovery_to_complete = 0;
+		_scsih_probe_devices(ioc);
+	}
+	mpt2sas_base_start_watchdog(ioc);
+	ioc->is_driver_loading = 0;
+	return 1;
+}
+
+
 /**
  * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
@@ -7548,6 +7920,7 @@
 	ioc->tm_cb_idx = tm_cb_idx;
 	ioc->ctl_cb_idx = ctl_cb_idx;
 	ioc->base_cb_idx = base_cb_idx;
+	ioc->port_enable_cb_idx = port_enable_cb_idx;
 	ioc->transport_cb_idx = transport_cb_idx;
 	ioc->scsih_cb_idx = scsih_cb_idx;
 	ioc->config_cb_idx = config_cb_idx;
@@ -7620,14 +7993,14 @@
 		goto out_thread_fail;
 	}
 
-	ioc->wait_for_port_enable_to_complete = 1;
+	ioc->is_driver_loading = 1;
 	if ((mpt2sas_base_attach(ioc))) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
 		goto out_attach_fail;
 	}
 
-	ioc->wait_for_port_enable_to_complete = 0;
+	scsi_scan_host(shost);
 	if (ioc->is_warpdrive) {
 		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
 			ioc->hide_drives = 0;
@@ -7650,6 +8023,7 @@
  out_thread_fail:
 	list_del(&ioc->list);
 	scsi_remove_host(shost);
+	scsi_host_put(shost);
  out_add_shost_fail:
 	return -ENODEV;
 }
@@ -7896,6 +8270,8 @@
 
 	/* base internal commands callback handler */
 	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
+	port_enable_cb_idx = mpt2sas_base_register_callback_handler(
+		mpt2sas_port_enable_done);
 
 	/* transport internal commands callback handler */
 	transport_cb_idx = mpt2sas_base_register_callback_handler(
@@ -7950,6 +8326,7 @@
 	mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
 	mpt2sas_base_release_callback_handler(tm_cb_idx);
 	mpt2sas_base_release_callback_handler(base_cb_idx);
+	mpt2sas_base_release_callback_handler(port_enable_cb_idx);
 	mpt2sas_base_release_callback_handler(transport_cb_idx);
 	mpt2sas_base_release_callback_handler(scsih_cb_idx);
 	mpt2sas_base_release_callback_handler(config_cb_idx);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 621b5e0..6f58919 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -732,6 +732,16 @@
 		.class_mask	= 0,
 		.driver_data	= chip_9485,
 	},
+	{ PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
+	{ PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1041), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1042), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1043), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1044), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1080), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1083), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+	{ PCI_VDEVICE(OCZ, 0x1084), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 86afb13f..c06b8e5 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -40,6 +40,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <scsi/osd_initiator.h>
 #include <scsi/osd_sec.h>
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index b86db84..5163edb 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4102,7 +4102,7 @@
 	struct pmcraid_ioctl_header *hdr = NULL;
 	int retval = -ENOTTY;
 
-	hdr = kmalloc(GFP_KERNEL, sizeof(struct pmcraid_ioctl_header));
+	hdr = kmalloc(sizeof(struct pmcraid_ioctl_header), GFP_KERNEL);
 
 	if (!hdr) {
 		pmcraid_err("faile to allocate memory for ioctl header\n");
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index cd178b9..959f100 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -20,6 +20,7 @@
 
 #include <linux/cdrom.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 3474e86..2516adf 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2279,7 +2279,7 @@
 	ha = rsp->hw;
 
 	/* Clear the interrupt, if enabled, for this response queue */
-	if (rsp->options & ~BIT_6) {
+	if (!ha->flags.disable_msix_handshake) {
 		reg = &ha->iobase->isp24;
 		spin_lock_irqsave(&ha->hardware_lock, flags);
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fc3f168..f85cfa6 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -12,6 +12,7 @@
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/mempool.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -1408,6 +1409,8 @@
 
 	blk_start_request(req);
 
+	scmd_printk(KERN_INFO, cmd, "killing request\n");
+
 	sdev = cmd->device;
 	starget = scsi_target(sdev);
 	shost = sdev->host;
@@ -1489,7 +1492,6 @@
 	struct request *req;
 
 	if (!sdev) {
-		printk("scsi: killing requests for dead queue\n");
 		while ((req = blk_peek_request(q)) != NULL)
 			scsi_kill_request(req, q);
 		return;
@@ -1698,6 +1700,15 @@
 
 void scsi_free_queue(struct request_queue *q)
 {
+	unsigned long flags;
+
+	WARN_ON(q->queuedata);
+
+	/* cause scsi_request_fn() to kill all non-finished requests */
+	spin_lock_irqsave(q->queue_lock, flags);
+	q->request_fn(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
 	blk_cleanup_queue(q);
 }
 
diff --git a/drivers/scsi/scsi_lib_dma.c b/drivers/scsi/scsi_lib_dma.c
index dcd1285..2ac3f39 100644
--- a/drivers/scsi/scsi_lib_dma.c
+++ b/drivers/scsi/scsi_lib_dma.c
@@ -4,6 +4,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 26a8a45..44f76e8 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -23,6 +23,7 @@
 #include <linux/security.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/netlink.h>
 
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index d82a023a..d329f8b 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/pm_runtime.h>
+#include <linux/export.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 44e8ca3..b3c6d95 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -319,10 +319,7 @@
 	return sdev;
 
 out_device_destroy:
-	scsi_device_set_state(sdev, SDEV_DEL);
-	transport_destroy_device(&sdev->sdev_gendev);
-	put_device(&sdev->sdev_dev);
-	put_device(&sdev->sdev_gendev);
+	__scsi_remove_device(sdev);
 out:
 	if (display_failure_msg)
 		printk(ALLOC_FAILURE_MSG, __func__);
diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c
index 0172de1..6209110 100644
--- a/drivers/scsi/scsi_tgt_if.c
+++ b/drivers/scsi/scsi_tgt_if.c
@@ -22,6 +22,7 @@
 #include <linux/miscdevice.h>
 #include <linux/gfp.h>
 #include <linux/file.h>
+#include <linux/export.h>
 #include <net/tcp.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 1bcd65a..96029e6 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -520,7 +520,7 @@
 /**
  * iscsi_bsg_host_add - Create and add the bsg hooks to receive requests
  * @shost: shost for iscsi_host
- * @cls_host: iscsi_cls_host adding the structures to
+ * @ihost: iscsi_cls_host adding the structures to
  */
 static int
 iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a7942e5..fa3a591 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2590,18 +2590,16 @@
 		spin_unlock(&sd_index_lock);
 	} while (error == -EAGAIN);
 
-	if (error)
+	if (error) {
+		sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
 		goto out_put;
-
-	if (index >= SD_MAX_DISKS) {
-		error = -ENODEV;
-		sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n");
-		goto out_free_index;
 	}
 
 	error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
-	if (error)
+	if (error) {
+		sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
 		goto out_free_index;
+	}
 
 	sdkp->device = sdp;
 	sdkp->driver = &sd_template;
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 6ad798b..4163f29 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -9,12 +9,6 @@
 #define SD_MAJORS	16
 
 /*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS	(((26 * 26) + 26 + 1) * 26)
-
-/*
  * Time out in seconds for disks and Magneto-opticals (which are slower).
  */
 #define SD_TIMEOUT		(30 * HZ)
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index 8be3055..a3911c3 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -4,6 +4,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/blkpg.h>
 #include <linux/cdrom.h>
 #include <linux/delay.h>
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 1871b8a..9b28f39 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -462,14 +462,16 @@
 {
 	struct st_request *SRpnt = req->end_io_data;
 	struct scsi_tape *STp = SRpnt->stp;
+	struct bio *tmp;
 
 	STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
 	STp->buffer->cmdstat.residual = req->resid_len;
 
+	tmp = SRpnt->bio;
 	if (SRpnt->waiting)
 		complete(SRpnt->waiting);
 
-	blk_rq_unmap_user(SRpnt->bio);
+	blk_rq_unmap_user(tmp);
 	__blk_put_request(req->q, req);
 }
 
diff --git a/drivers/sfi/sfi_core.h b/drivers/sfi/sfi_core.h
index b7cf220..1d5cfe8 100644
--- a/drivers/sfi/sfi_core.h
+++ b/drivers/sfi/sfi_core.h
@@ -55,6 +55,9 @@
   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 */
+
+#include <linux/sysfs.h>
+
 struct sfi_table_key{
 	char	*sig;
 	char	*oem_id;
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 24e6cec..67e272a 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -7,3 +7,11 @@
 obj-$(CONFIG_MAPLE)		+= maple/
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_GENERIC_GPIO)	+= pfc.o
+
+#
+# For the moment we only use this framework for ARM-based SH/R-Mobile
+# platforms and generic SH. SH-based SH-Mobile platforms are still using
+# an older framework that is pending up-porting, at which point this
+# special casing can go away.
+#
+obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE)	+= pm_runtime.o
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index dc8d022..db257a3 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -25,7 +25,6 @@
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/debugfs.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/sh_clk.h>
@@ -173,6 +172,26 @@
 	return clk_rate_round_helper(&div_range_round);
 }
 
+static long clk_rate_mult_range_iter(unsigned int pos,
+				      struct clk_rate_round_data *rounder)
+{
+	return clk_get_rate(rounder->arg) * pos;
+}
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate)
+{
+	struct clk_rate_round_data mult_range_round = {
+		.min	= mult_min,
+		.max	= mult_max,
+		.func	= clk_rate_mult_range_iter,
+		.arg	= clk_get_parent(clk),
+		.rate	= rate,
+	};
+
+	return clk_rate_round_helper(&mult_range_round);
+}
+
 int clk_rate_table_find(struct clk *clk,
 			struct cpufreq_frequency_table *freq_table,
 			unsigned long rate)
@@ -205,9 +224,6 @@
 		list_add(&child->sibling, &parent->children);
 	child->parent = parent;
 
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
-
 	return 0;
 }
 
@@ -665,89 +681,6 @@
 subsys_initcall(clk_syscore_init);
 #endif
 
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-	char s[255];
-	char *p = s;
-
-	p += sprintf(p, "%p", c);
-	d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dentry = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dentry);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dentry) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dentry) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clock_list, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
 static int __init clk_late_init(void)
 {
 	unsigned long flags;
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
index 33b2ed4..7b246ef 100644
--- a/drivers/sh/intc/chip.c
+++ b/drivers/sh/intc/chip.c
@@ -186,7 +186,7 @@
     !defined(CONFIG_CPU_SUBTYPE_SH7709)
 	[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
 #endif
-#if defined(CONFIG_ARCH_SH7372)
+#if defined(CONFIG_ARM) /* all recent SH-Mobile / R-Mobile ARM support this */
 	[IRQ_TYPE_EDGE_BOTH] = VALID(4),
 #endif
 };
@@ -202,11 +202,16 @@
 	if (!value)
 		return -EINVAL;
 
+	value &= ~SENSE_VALID_FLAG;
+
 	ihp = intc_find_irq(d->sense, d->nr_sense, irq);
 	if (ihp) {
+		/* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
+		if (value >= (1 << _INTC_WIDTH(ihp->handle)))
+			return -EINVAL;
+
 		addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
-		intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle,
-						    value & ~SENSE_VALID_FLAG);
+		intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
 	}
 
 	return 0;
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
index c6ca115..8b7a141 100644
--- a/drivers/sh/intc/core.c
+++ b/drivers/sh/intc/core.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/interrupt.h>
 #include <linux/sh_intc.h>
 #include <linux/sysdev.h>
@@ -29,6 +30,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/radix-tree.h>
+#include <linux/export.h>
 #include "internals.h"
 
 LIST_HEAD(intc_list);
diff --git a/drivers/sh/intc/dynamic.c b/drivers/sh/intc/dynamic.c
index a3677c9..5fea1ee 100644
--- a/drivers/sh/intc/dynamic.c
+++ b/drivers/sh/intc/dynamic.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/bitmap.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include "internals.h" /* only for activate_irq() damage.. */
 
 /*
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
index e32304b..56bf933 100644
--- a/drivers/sh/intc/userimask.c
+++ b/drivers/sh/intc/userimask.c
@@ -13,6 +13,7 @@
 #include <linux/sysdev.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/stat.h>
 #include <asm/sizes.h>
 #include "internals.h"
 
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
index 1e6e2d0..c7ec49f 100644
--- a/drivers/sh/intc/virq.c
+++ b/drivers/sh/intc/virq.c
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/radix-tree.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include "internals.h"
 
 static struct intc_map_entry intc_irq_xlate[NR_IRQS];
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 1e20604..bec81c2 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -20,6 +20,7 @@
 #include <linux/maple.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/io.h>
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
index 75934e3..e67fe17 100644
--- a/drivers/sh/pfc.c
+++ b/drivers/sh/pfc.c
@@ -217,7 +217,7 @@
 
 		if (!r_width)
 			break;
-		for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
+		for (n = 0; n < (r_width / f_width) * (1 << f_width); n++) {
 			if (config_reg->enum_ids[n] == enum_id) {
 				*crp = config_reg;
 				*indexp = n;
@@ -577,6 +577,32 @@
 	sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
 }
 
+static int sh_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct pinmux_info *gpioc = chip_to_pinmux(chip);
+	pinmux_enum_t enum_id;
+	pinmux_enum_t *enum_ids;
+	int i, k, pos;
+
+	pos = 0;
+	enum_id = 0;
+	while (1) {
+		pos = get_gpio_enum_id(gpioc, offset, pos, &enum_id);
+		if (pos <= 0 || !enum_id)
+			break;
+
+		for (i = 0; i < gpioc->gpio_irq_size; i++) {
+			enum_ids = gpioc->gpio_irq[i].enum_ids;
+			for (k = 0; enum_ids[k]; k++) {
+				if (enum_ids[k] == enum_id)
+					return gpioc->gpio_irq[i].irq;
+			}
+		}
+	}
+
+	return -ENOSYS;
+}
+
 int register_pinmux(struct pinmux_info *pip)
 {
 	struct gpio_chip *chip = &pip->chip;
@@ -592,6 +618,7 @@
 	chip->get = sh_gpio_get;
 	chip->direction_output = sh_gpio_direction_output;
 	chip->set = sh_gpio_set;
+	chip->to_irq = sh_gpio_to_irq;
 
 	WARN_ON(pip->first_gpio != 0); /* needs testing */
 
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/drivers/sh/pm_runtime.c
similarity index 93%
rename from arch/arm/mach-shmobile/pm_runtime.c
rename to drivers/sh/pm_runtime.c
index bd5c6a3..afe9282 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -1,7 +1,5 @@
 /*
- * arch/arm/mach-shmobile/pm_runtime.c
- *
- * Runtime PM support code for SuperH Mobile ARM
+ * Runtime PM support code
  *
  *  Copyright (C) 2009-2010 Magnus Damm
  *
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 52e2900..a1fd73d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -88,7 +88,7 @@
 
 config SPI_AU1550
 	tristate "Au1550/Au12x0 SPI Controller"
-	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
+	depends on MIPS_ALCHEMY && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 881c196..c00d00e 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 79665e2..16d6a83 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -907,7 +907,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
 {
 	struct resource		*regs;
 	int			irq;
@@ -1003,7 +1003,7 @@
 	return ret;
 }
 
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master	*master = platform_get_drvdata(pdev);
 	struct atmel_spi	*as = spi_master_get_devdata(master);
@@ -1072,6 +1072,7 @@
 	},
 	.suspend	= atmel_spi_suspend,
 	.resume		= atmel_spi_resume,
+	.probe		= atmel_spi_probe,
 	.remove		= __exit_p(atmel_spi_remove),
 };
 module_platform_driver(atmel_spi_driver);
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index bddee5f5..5784c87 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/resource.h>
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 02d57fb..aef59b1 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -20,6 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
diff --git a/drivers/spi/spi-butterfly.c b/drivers/spi/spi-butterfly.c
index 9f907ec..5ed08e5 100644
--- a/drivers/spi/spi-butterfly.c
+++ b/drivers/spi/spi-butterfly.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/parport.h>
 
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index fac399c..db2f1ba 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/scatterlist.h>
+#include <linux/module.h>
 
 #include "spi-dw.h"
 
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index c5f37f0..f64250e 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #include "spi-dw.h"
 
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 296d94f..082458d 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -19,6 +19,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/highmem.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 635ff08..e093d3e 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index e763254..21c70b2 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -426,7 +426,7 @@
 		goto err_clk;
 	}
 
-	mfp_set_groupg(&pdev->dev);
+	mfp_set_groupg(&pdev->dev, NULL);
 	nuc900_init_spi(hw);
 
 	err = spi_bitbang_start(&hw->bitbang);
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index 897274e..698018f 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 00a8e9d..610f739 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -45,6 +45,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 9421a39..13448c8 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_NAME			"orion_spi"
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index f103e47..5559b22 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2184,6 +2184,12 @@
 		goto  err_clk_prep;
 	}
 
+	status = clk_enable(pl022->clk);
+	if (status) {
+		dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+		goto err_no_clk_en;
+	}
+
 	/* Disable SSP */
 	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
 	       SSP_CR1(pl022->virtbase));
@@ -2237,6 +2243,8 @@
 
 	free_irq(adev->irq[0], pl022);
  err_no_irq:
+	clk_disable(pl022->clk);
+ err_no_clk_en:
 	clk_unprepare(pl022->clk);
  err_clk_prep:
 	clk_put(pl022->clk);
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 378e504..8caa07d 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -5,6 +5,7 @@
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 #include <linux/spi/pxa2xx_spi.h>
 
 struct ce4100_info {
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index b857a3e..fc06453 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -24,6 +24,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
 
 #include <plat/regs-spi.h>
 #include <mach/spi.h>
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 595dacc..019a716 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -131,6 +131,12 @@
 #define RXBUSY    (1<<2)
 #define TXBUSY    (1<<3)
 
+struct s3c64xx_spi_dma_data {
+	unsigned		ch;
+	enum dma_data_direction direction;
+	enum dma_ch	dmach;
+};
+
 /**
  * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
  * @clk: Pointer to the spi clock.
@@ -164,13 +170,14 @@
 	struct work_struct              work;
 	struct list_head                queue;
 	spinlock_t                      lock;
-	enum dma_ch                     rx_dmach;
-	enum dma_ch                     tx_dmach;
 	unsigned long                   sfr_start;
 	struct completion               xfer_completion;
 	unsigned                        state;
 	unsigned                        cur_mode, cur_bpw;
 	unsigned                        cur_speed;
+	struct s3c64xx_spi_dma_data	rx_dma;
+	struct s3c64xx_spi_dma_data	tx_dma;
+	struct samsung_dma_ops		*ops;
 };
 
 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -226,6 +233,78 @@
 	writel(val, regs + S3C64XX_SPI_CH_CFG);
 }
 
+static void s3c64xx_spi_dmacb(void *data)
+{
+	struct s3c64xx_spi_driver_data *sdd;
+	struct s3c64xx_spi_dma_data *dma = data;
+	unsigned long flags;
+
+	if (dma->direction == DMA_FROM_DEVICE)
+		sdd = container_of(data,
+			struct s3c64xx_spi_driver_data, rx_dma);
+	else
+		sdd = container_of(data,
+			struct s3c64xx_spi_driver_data, tx_dma);
+
+	spin_lock_irqsave(&sdd->lock, flags);
+
+	if (dma->direction == DMA_FROM_DEVICE) {
+		sdd->state &= ~RXBUSY;
+		if (!(sdd->state & TXBUSY))
+			complete(&sdd->xfer_completion);
+	} else {
+		sdd->state &= ~TXBUSY;
+		if (!(sdd->state & RXBUSY))
+			complete(&sdd->xfer_completion);
+	}
+
+	spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+					unsigned len, dma_addr_t buf)
+{
+	struct s3c64xx_spi_driver_data *sdd;
+	struct samsung_dma_prep_info info;
+
+	if (dma->direction == DMA_FROM_DEVICE)
+		sdd = container_of((void *)dma,
+			struct s3c64xx_spi_driver_data, rx_dma);
+	else
+		sdd = container_of((void *)dma,
+			struct s3c64xx_spi_driver_data, tx_dma);
+
+	info.cap = DMA_SLAVE;
+	info.len = len;
+	info.fp = s3c64xx_spi_dmacb;
+	info.fp_param = dma;
+	info.direction = dma->direction;
+	info.buf = buf;
+
+	sdd->ops->prepare(dma->ch, &info);
+	sdd->ops->trigger(dma->ch);
+}
+
+static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
+{
+	struct samsung_dma_info info;
+
+	sdd->ops = samsung_dma_get_ops();
+
+	info.cap = DMA_SLAVE;
+	info.client = &s3c64xx_spi_dma_client;
+	info.width = sdd->cur_bpw / 8;
+
+	info.direction = sdd->rx_dma.direction;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+	sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
+	info.direction =  sdd->tx_dma.direction;
+	info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+	sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
+
+	return 1;
+}
+
 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
@@ -258,10 +337,7 @@
 		chcfg |= S3C64XX_SPI_CH_TXCH_ON;
 		if (dma_mode) {
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
-			s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
-						xfer->tx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+			prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
 		} else {
 			switch (sdd->cur_bpw) {
 			case 32:
@@ -293,10 +369,7 @@
 			writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
 					| S3C64XX_SPI_PACKET_CNT_EN,
 					regs + S3C64XX_SPI_PACKET_CNT);
-			s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
-			s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
-						xfer->rx_dma, xfer->len);
-			s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+			prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
 		}
 	}
 
@@ -482,46 +555,6 @@
 	}
 }
 
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~RXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
-	/* If the other done */
-	if (!(sdd->state & TXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				 int size, enum s3c2410_dma_buffresult res)
-{
-	struct s3c64xx_spi_driver_data *sdd = buf_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdd->lock, flags);
-
-	if (res == S3C2410_RES_OK)
-		sdd->state &= ~TXBUSY;
-	else
-		dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
-	/* If the other done */
-	if (!(sdd->state & RXBUSY))
-		complete(&sdd->xfer_completion);
-
-	spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
 
 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -696,12 +729,10 @@
 			if (use_dma) {
 				if (xfer->tx_buf != NULL
 						&& (sdd->state & TXBUSY))
-					s3c2410_dma_ctrl(sdd->tx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->tx_dma.ch);
 				if (xfer->rx_buf != NULL
 						&& (sdd->state & RXBUSY))
-					s3c2410_dma_ctrl(sdd->rx_dmach,
-							S3C2410_DMAOP_FLUSH);
+					sdd->ops->stop(sdd->rx_dma.ch);
 			}
 
 			goto out;
@@ -739,30 +770,6 @@
 		msg->complete(msg->context);
 }
 
-static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
-{
-	if (s3c2410_dma_request(sdd->rx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
-	s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
-					sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
-	if (s3c2410_dma_request(sdd->tx_dmach,
-					&s3c64xx_spi_dma_client, NULL) < 0) {
-		dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
-		s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
-		return 0;
-	}
-	s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
-	s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
-					sdd->sfr_start + S3C64XX_SPI_TX_DATA);
-
-	return 1;
-}
-
 static void s3c64xx_spi_work(struct work_struct *work)
 {
 	struct s3c64xx_spi_driver_data *sdd = container_of(work,
@@ -799,8 +806,8 @@
 	spin_unlock_irqrestore(&sdd->lock, flags);
 
 	/* Free DMA channels */
-	s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
-	s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
+	sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
 }
 
 static int s3c64xx_spi_transfer(struct spi_device *spi,
@@ -1017,8 +1024,10 @@
 	sdd->cntrlr_info = sci;
 	sdd->pdev = pdev;
 	sdd->sfr_start = mem_res->start;
-	sdd->tx_dmach = dmatx_res->start;
-	sdd->rx_dmach = dmarx_res->start;
+	sdd->tx_dma.dmach = dmatx_res->start;
+	sdd->tx_dma.direction = DMA_TO_DEVICE;
+	sdd->rx_dma.dmach = dmarx_res->start;
+	sdd->rx_dma.direction = DMA_FROM_DEVICE;
 
 	sdd->cur_bpw = 8;
 
@@ -1106,7 +1115,7 @@
 					pdev->id, master->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
 					mem_res->end, mem_res->start,
-					sdd->rx_dmach, sdd->tx_dmach);
+					sdd->rx_dma.dmach, sdd->tx_dma.dmach);
 
 	return 0;
 
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 0f4834a..1f466bc 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index 8844bc34..097e5060 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -22,6 +22,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/module.h>
 
 #include <asm/spi.h>
 #include <asm/io.h>
diff --git a/drivers/spi/spi-ti-ssp.c b/drivers/spi/spi-ti-ssp.c
index 7963c60..3f6f6e8 100644
--- a/drivers/spi/spi-ti-ssp.c
+++ b/drivers/spi/spi-ti-ssp.c
@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ti_ssp.h>
diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c
index 940e73d..0ce5c12 100644
--- a/drivers/spi/spi-tle62x0.c
+++ b/drivers/spi/spi-tle62x0.c
@@ -11,6 +11,7 @@
 
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <linux/spi/spi.h>
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index f0a2ab0..d5a3cbb 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <asm/gpio.h>
 
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4d1b9f5..77eae99 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/of_spi.h>
 #include <linux/pm_runtime.h>
+#include <linux/export.h>
 
 static void spidev_release(struct device *dev)
 {
diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index bf53e44..bad7ba5 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <linux/ssb/ssb.h>
 
 #include "ssb_private.h"
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 5d9c97c..e9d2ca1 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -10,6 +10,7 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 
 #include "ssb_private.h"
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index 52901c1..e5a2e0e 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -12,6 +12,7 @@
 #include <linux/ssb/ssb_regs.h>
 #include <linux/ssb/ssb_driver_chipcommon.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include "ssb_private.h"
 
diff --git a/drivers/ssb/driver_gige.c b/drivers/ssb/driver_gige.c
index 3adb98d..f30ea68 100644
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -10,6 +10,7 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_driver_gige.h>
+#include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/slab.h>
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index e6ac317..84c934c 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -10,6 +10,7 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/ssb/ssb_embedded.h>
 
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
index eec3e26..9ef124f 100644
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -8,6 +8,7 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/export.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_embedded.h>
 #include <linux/ssb/ssb_driver_pci.h>
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index d0cbdb0..bb6317f 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -12,6 +12,7 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/ssb/ssb_driver_gige.h>
diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c
index 116a811..af5448f 100644
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/ssb/ssb.h>
 
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d132c27..25cdff3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -30,12 +30,6 @@
 
 source "drivers/staging/slicoss/Kconfig"
 
-source "drivers/staging/go7007/Kconfig"
-
-source "drivers/staging/cx25821/Kconfig"
-
-source "drivers/staging/cxd2099/Kconfig"
-
 source "drivers/staging/usbip/Kconfig"
 
 source "drivers/staging/winbond/Kconfig"
@@ -104,20 +98,12 @@
 
 source "drivers/staging/sm7xx/Kconfig"
 
-source "drivers/staging/dt3155v4l/Kconfig"
-
 source "drivers/staging/crystalhd/Kconfig"
 
 source "drivers/staging/cxt1e1/Kconfig"
 
 source "drivers/staging/xgifb/Kconfig"
 
-source "drivers/staging/lirc/Kconfig"
-
-source "drivers/staging/easycap/Kconfig"
-
-source "drivers/staging/solo6x10/Kconfig"
-
 source "drivers/staging/tidspbridge/Kconfig"
 
 source "drivers/staging/quickstart/Kconfig"
@@ -144,4 +130,6 @@
 
 source "drivers/staging/nvec/Kconfig"
 
+source "drivers/staging/media/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 936b7c2..a25f3f2 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -4,12 +4,9 @@
 obj-$(CONFIG_STAGING)		+= staging.o
 
 obj-y				+= serial/
+obj-y				+= media/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
-obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
-obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
-obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
-obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
@@ -44,12 +41,9 @@
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xx/
-obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/
 obj-$(CONFIG_CRYSTALHD)		+= crystalhd/
 obj-$(CONFIG_CXT1E1)		+= cxt1e1/
 obj-$(CONFIG_FB_XGI)		+= xgifb/
-obj-$(CONFIG_EASYCAP)		+= easycap/
-obj-$(CONFIG_SOLO6X10)		+= solo6x10/
 obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
 obj-$(CONFIG_SBE_2T3E3)		+= sbe-2t3e3/
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 21d8c1c..5e78c77 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -671,7 +671,7 @@
 	}
 
 	insns =
-	    kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL);
+	    kcalloc(insnlist.n_insns, sizeof(struct comedi_insn), GFP_KERNEL);
 	if (!insns) {
 		DPRINTK("kmalloc failed\n");
 		ret = -ENOMEM;
@@ -1432,7 +1432,21 @@
 	return ret;
 }
 
-static void comedi_unmap(struct vm_area_struct *area)
+
+static void comedi_vm_open(struct vm_area_struct *area)
+{
+	struct comedi_async *async;
+	struct comedi_device *dev;
+
+	async = area->vm_private_data;
+	dev = async->subdevice->device;
+
+	mutex_lock(&dev->mutex);
+	async->mmap_count++;
+	mutex_unlock(&dev->mutex);
+}
+
+static void comedi_vm_close(struct vm_area_struct *area)
 {
 	struct comedi_async *async;
 	struct comedi_device *dev;
@@ -1446,15 +1460,13 @@
 }
 
 static struct vm_operations_struct comedi_vm_ops = {
-	.close = comedi_unmap,
+	.open = comedi_vm_open,
+	.close = comedi_vm_close,
 };
 
 static int comedi_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	const unsigned minor = iminor(file->f_dentry->d_inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
-	struct comedi_device *dev = dev_file_info->device;
 	struct comedi_async *async = NULL;
 	unsigned long start = vma->vm_start;
 	unsigned long size;
@@ -1462,6 +1474,15 @@
 	int i;
 	int retval;
 	struct comedi_subdevice *s;
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+
+	dev_file_info = comedi_get_device_file_info(minor);
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	mutex_lock(&dev->mutex);
 	if (!dev->attached) {
@@ -1528,11 +1549,17 @@
 {
 	unsigned int mask = 0;
 	const unsigned minor = iminor(file->f_dentry->d_inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
-	struct comedi_device *dev = dev_file_info->device;
 	struct comedi_subdevice *read_subdev;
 	struct comedi_subdevice *write_subdev;
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+	dev_file_info = comedi_get_device_file_info(minor);
+
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	mutex_lock(&dev->mutex);
 	if (!dev->attached) {
@@ -1578,9 +1605,15 @@
 	int n, m, count = 0, retval = 0;
 	DECLARE_WAITQUEUE(wait, current);
 	const unsigned minor = iminor(file->f_dentry->d_inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
-	struct comedi_device *dev = dev_file_info->device;
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+	dev_file_info = comedi_get_device_file_info(minor);
+
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	if (!dev->attached) {
 		DPRINTK("no driver configured on comedi%i\n", dev->minor);
@@ -1640,11 +1673,11 @@
 				retval = -EAGAIN;
 				break;
 			}
+			schedule();
 			if (signal_pending(current)) {
 				retval = -ERESTARTSYS;
 				break;
 			}
-			schedule();
 			if (!s->busy)
 				break;
 			if (s->busy != file) {
@@ -1683,9 +1716,15 @@
 	int n, m, count = 0, retval = 0;
 	DECLARE_WAITQUEUE(wait, current);
 	const unsigned minor = iminor(file->f_dentry->d_inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
-	struct comedi_device *dev = dev_file_info->device;
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+	dev_file_info = comedi_get_device_file_info(minor);
+
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	if (!dev->attached) {
 		DPRINTK("no driver configured on comedi%i\n", dev->minor);
@@ -1741,11 +1780,11 @@
 				retval = -EAGAIN;
 				break;
 			}
+			schedule();
 			if (signal_pending(current)) {
 				retval = -ERESTARTSYS;
 				break;
 			}
-			schedule();
 			if (!s->busy) {
 				retval = 0;
 				break;
@@ -1885,11 +1924,17 @@
 static int comedi_close(struct inode *inode, struct file *file)
 {
 	const unsigned minor = iminor(inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
-	struct comedi_device *dev = dev_file_info->device;
 	struct comedi_subdevice *s = NULL;
 	int i;
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+	dev_file_info = comedi_get_device_file_info(minor);
+
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	mutex_lock(&dev->mutex);
 
@@ -1923,10 +1968,15 @@
 static int comedi_fasync(int fd, struct file *file, int on)
 {
 	const unsigned minor = iminor(file->f_dentry->d_inode);
-	struct comedi_device_file_info *dev_file_info =
-	    comedi_get_device_file_info(minor);
+	struct comedi_device_file_info *dev_file_info;
+	struct comedi_device *dev;
+	dev_file_info = comedi_get_device_file_info(minor);
 
-	struct comedi_device *dev = dev_file_info->device;
+	if (dev_file_info == NULL)
+	        return -ENODEV;
+	dev = dev_file_info->device;
+	if (dev == NULL)
+	        return -ENODEV;
 
 	return fasync_helper(fd, file, on, &dev->async_queue);
 }
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index a8fea9a91..6144afb 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -1,4 +1,4 @@
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.6"
 #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com"
 #define DRIVER_DESC "Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com"
 /*
@@ -25,7 +25,7 @@
 Description: University of Stirling USB DAQ & INCITE Technology Limited
 Devices: [ITL] USB-DUX (usbduxsigma.o)
 Author: Bernd Porr <BerndPorr@f2s.com>
-Updated: 21 Jul 2011
+Updated: 8 Nov 2011
 Status: testing
 */
 /*
@@ -44,6 +44,7 @@
  *   0.3: proper vendor ID and driver name
  *   0.4: fixed D/A voltage range
  *   0.5: various bug fixes, health check at startup
+ *   0.6: corrected wrong input range
  */
 
 /* generates loads of debug info */
@@ -175,7 +176,7 @@
 /* comedi constants */
 static const struct comedi_lrange range_usbdux_ai_range = { 1, {
 								BIP_RANGE
-								(2.65)
+								(2.65/2.0)
 								}
 };
 
diff --git a/drivers/staging/cx25821/README b/drivers/staging/cx25821/README
deleted file mode 100644
index a9ba50b..0000000
--- a/drivers/staging/cx25821/README
+++ /dev/null
@@ -1,6 +0,0 @@
-Todo:
-	- checkpatch.pl cleanups
-	- sparse cleanups
-
-Please send patches to linux-media@vger.kernel.org
-
diff --git a/drivers/staging/cxt1e1/linux.c b/drivers/staging/cxt1e1/linux.c
index 24e009c..911c0e4 100644
--- a/drivers/staging/cxt1e1/linux.c
+++ b/drivers/staging/cxt1e1/linux.c
@@ -16,6 +16,7 @@
 
 #include <linux/types.h>
 #include <linux/netdevice.h>
+#include <linux/module.h>
 #include <linux/hdlc.h>
 #include <linux/if_arp.h>
 #include <linux/init.h>
diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig
index 9e1864c..8190f2a 100644
--- a/drivers/staging/et131x/Kconfig
+++ b/drivers/staging/et131x/Kconfig
@@ -1,6 +1,7 @@
 config ET131X
 	tristate "Agere ET-1310 Gigabit Ethernet support"
-	depends on PCI
+	depends on PCI && NET && NETDEVICES
+	select PHYLIB
 	default n
 	---help---
 	  This driver supports Agere ET-1310 ethernet adapters.
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index f5f44a0..0c1c6ca 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -4469,6 +4469,12 @@
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
+#define ET131X_PM_OPS (&et131x_pm_ops)
+#else
+#define ET131X_PM_OPS NULL
+#endif
+
 /* ISR functions */
 
 /**
@@ -5470,12 +5476,6 @@
 	return result;
 }
 
-static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
-#define ET131X_PM_OPS (&et131x_pm_ops)
-#else
-#define ET131X_PM_OPS NULL
-#endif
-
 static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = {
 	{ PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL},
 	{ PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL},
diff --git a/drivers/staging/gma500/intel_i2c.c b/drivers/staging/gma500/intel_i2c.c
index e33432d..51cbf65 100644
--- a/drivers/staging/gma500/intel_i2c.c
+++ b/drivers/staging/gma500/intel_i2c.c
@@ -20,6 +20,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
+#include <linux/export.h>
 
 #include "psb_drv.h"
 #include "psb_intel_reg.h"
diff --git a/drivers/staging/gma500/mdfld_dsi_output.c b/drivers/staging/gma500/mdfld_dsi_output.c
index 9050c0f..3f979db 100644
--- a/drivers/staging/gma500/mdfld_dsi_output.c
+++ b/drivers/staging/gma500/mdfld_dsi_output.c
@@ -32,6 +32,7 @@
 #include <asm/intel_scu_ipc.h>
 #include "mdfld_dsi_pkg_sender.h"
 #include <linux/pm_runtime.h>
+#include <linux/moduleparam.h>
 
 #define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100
 
diff --git a/drivers/staging/gma500/mdfld_output.c b/drivers/staging/gma500/mdfld_output.c
index ee55f87..eabf53d 100644
--- a/drivers/staging/gma500/mdfld_output.c
+++ b/drivers/staging/gma500/mdfld_output.c
@@ -26,6 +26,7 @@
 */
 
 #include <linux/init.h>
+#include <linux/moduleparam.h>
 #include "mdfld_dsi_dbi.h"
 #include "mdfld_dsi_dpi.h"
 #include "mdfld_dsi_output.h"
@@ -167,4 +168,4 @@
 		else
 			mdfld_dbi_dsr_init(dev);
 	}
-}
\ No newline at end of file
+}
diff --git a/drivers/staging/gma500/mid_bios.c b/drivers/staging/gma500/mid_bios.c
index 8cfe301..ee3c036 100644
--- a/drivers/staging/gma500/mid_bios.c
+++ b/drivers/staging/gma500/mid_bios.c
@@ -23,6 +23,7 @@
  * - Check ioremap failures
  */
 
+#include <linux/moduleparam.h>
 #include <drm/drmP.h>
 #include <drm/drm.h>
 #include "psb_drm.h"
diff --git a/drivers/staging/gma500/mrst_hdmi_i2c.c b/drivers/staging/gma500/mrst_hdmi_i2c.c
index 351b9d8..36e7edc 100644
--- a/drivers/staging/gma500/mrst_hdmi_i2c.c
+++ b/drivers/staging/gma500/mrst_hdmi_i2c.c
@@ -29,6 +29,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include "psb_drv.h"
 
 #define HDMI_READ(reg)		readl(hdmi_dev->regs + (reg))
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index dc676c2..986a04d 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -35,6 +35,7 @@
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/pm_runtime.h>
+#include <linux/module.h>
 #include <acpi/video.h>
 
 static int drm_psb_trap_pagefaults;
diff --git a/drivers/staging/hv/Kconfig b/drivers/staging/hv/Kconfig
index 072185e..6c0dc30 100644
--- a/drivers/staging/hv/Kconfig
+++ b/drivers/staging/hv/Kconfig
@@ -9,9 +9,3 @@
 	depends on HYPERV && NET
 	help
 	  Select this option to enable the Hyper-V virtual network driver.
-
-config HYPERV_MOUSE
-	tristate "Microsoft Hyper-V mouse driver"
-	depends on HYPERV && HID
-	help
-	  Select this option to enable the Hyper-V mouse driver.
diff --git a/drivers/staging/hv/Makefile b/drivers/staging/hv/Makefile
index 0f55cee..fbe9a42 100644
--- a/drivers/staging/hv/Makefile
+++ b/drivers/staging/hv/Makefile
@@ -1,6 +1,5 @@
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
 obj-$(CONFIG_HYPERV_NET)	+= hv_netvsc.o
-obj-$(CONFIG_HYPERV_MOUSE)	+= hv_mouse.o
 
 hv_storvsc-y := storvsc_drv.o
 hv_netvsc-y := netvsc_drv.o netvsc.o rndis_filter.o
diff --git a/drivers/staging/iio/accel/adis16201_ring.c b/drivers/staging/iio/accel/adis16201_ring.c
index dbd8832..0016ed3 100644
--- a/drivers/staging/iio/accel/adis16201_ring.c
+++ b/drivers/staging/iio/accel/adis16201_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/accel/adis16201_trigger.c b/drivers/staging/iio/accel/adis16201_trigger.c
index f448258..bce505e 100644
--- a/drivers/staging/iio/accel/adis16201_trigger.c
+++ b/drivers/staging/iio/accel/adis16201_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/accel/adis16203_ring.c b/drivers/staging/iio/accel/adis16203_ring.c
index 838d301..1fdfe6f 100644
--- a/drivers/staging/iio/accel/adis16203_ring.c
+++ b/drivers/staging/iio/accel/adis16203_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/accel/adis16203_trigger.c b/drivers/staging/iio/accel/adis16203_trigger.c
index 50165f9..24bcb8e 100644
--- a/drivers/staging/iio/accel/adis16203_trigger.c
+++ b/drivers/staging/iio/accel/adis16203_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/accel/adis16204_ring.c b/drivers/staging/iio/accel/adis16204_ring.c
index 08551bb..6fd3d8f 100644
--- a/drivers/staging/iio/accel/adis16204_ring.c
+++ b/drivers/staging/iio/accel/adis16204_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/accel/adis16204_trigger.c b/drivers/staging/iio/accel/adis16204_trigger.c
index 55b661c..6e542af 100644
--- a/drivers/staging/iio/accel/adis16204_trigger.c
+++ b/drivers/staging/iio/accel/adis16204_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c
index bb66364..d17e39d 100644
--- a/drivers/staging/iio/accel/adis16209_ring.c
+++ b/drivers/staging/iio/accel/adis16209_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c
index 8df8a97..c5d82c1 100644
--- a/drivers/staging/iio/accel/adis16209_trigger.c
+++ b/drivers/staging/iio/accel/adis16209_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c
index 34f1e7e..b907ca3 100644
--- a/drivers/staging/iio/accel/adis16240_ring.c
+++ b/drivers/staging/iio/accel/adis16240_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c
index 13f1d14..8e0ce56 100644
--- a/drivers/staging/iio/accel/adis16240_trigger.c
+++ b/drivers/staging/iio/accel/adis16240_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 5c542dd..89527af 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../ring_sw.h"
diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c
index a831b92..999f8f7 100644
--- a/drivers/staging/iio/adc/ad7793.c
+++ b/drivers/staging/iio/adc/ad7793.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c
index 48389e1..974c6f5 100644
--- a/drivers/staging/iio/dac/ad5686.c
+++ b/drivers/staging/iio/dac/ad5686.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 38cf3f4..ff1b5a8 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -6,6 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c
index 679c151..52a9e78 100644
--- a/drivers/staging/iio/gyro/adis16260_ring.c
+++ b/drivers/staging/iio/gyro/adis16260_ring.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/kernel.h>
diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c
index 2f2b216..8299cd1 100644
--- a/drivers/staging/iio/gyro/adis16260_trigger.c
+++ b/drivers/staging/iio/gyro/adis16260_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index f0b36d2..edad0e7 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index c368245..fd886bf 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -4,6 +4,7 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../ring_sw.h"
diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c
index bf99153..5bf0007 100644
--- a/drivers/staging/iio/imu/adis16400_trigger.c
+++ b/drivers/staging/iio/imu/adis16400_trigger.c
@@ -1,6 +1,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/staging/iio/industrialio-buffer.c
index 6dd5d7d..9df0ce8 100644
--- a/drivers/staging/iio/industrialio-buffer.c
+++ b/drivers/staging/iio/industrialio-buffer.c
@@ -14,6 +14,7 @@
  * - Alternative access techniques?
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/cdev.h>
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index 326e967..aec9311 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -242,19 +242,26 @@
 
 static int iio_event_getfd(struct iio_dev *indio_dev)
 {
-	if (indio_dev->event_interface == NULL)
+	struct iio_event_interface *ev_int = indio_dev->event_interface;
+	int fd;
+
+	if (ev_int == NULL)
 		return -ENODEV;
 
-	mutex_lock(&indio_dev->event_interface->event_list_lock);
-	if (test_and_set_bit(IIO_BUSY_BIT_POS,
-			     &indio_dev->event_interface->flags)) {
-		mutex_unlock(&indio_dev->event_interface->event_list_lock);
+	mutex_lock(&ev_int->event_list_lock);
+	if (test_and_set_bit(IIO_BUSY_BIT_POS, &ev_int->flags)) {
+		mutex_unlock(&ev_int->event_list_lock);
 		return -EBUSY;
 	}
-	mutex_unlock(&indio_dev->event_interface->event_list_lock);
-	return anon_inode_getfd("iio:event",
-				&iio_event_chrdev_fileops,
-				indio_dev->event_interface, O_RDONLY);
+	mutex_unlock(&ev_int->event_list_lock);
+	fd = anon_inode_getfd("iio:event",
+				&iio_event_chrdev_fileops, ev_int, O_RDONLY);
+	if (fd < 0) {
+		mutex_lock(&ev_int->event_list_lock);
+		clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags);
+		mutex_unlock(&ev_int->event_list_lock);
+	}
+	return fd;
 }
 
 static int __init iio_init(void)
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index 99ade65..00fa2ac 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -5,6 +5,7 @@
  *
  * Licensed under the GPL-2.
  */
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/staging/iio/meter/ade7758_trigger.c b/drivers/staging/iio/meter/ade7758_trigger.c
index 392dfe3..b6569c7 100644
--- a/drivers/staging/iio/meter/ade7758_trigger.c
+++ b/drivers/staging/iio/meter/ade7758_trigger.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/export.h>
 
 #include "../iio.h"
 #include "../trigger.h"
diff --git a/drivers/staging/intel_sst/intel_sst.c b/drivers/staging/intel_sst/intel_sst.c
index c303d85..ff9aaec 100644
--- a/drivers/staging/intel_sst/intel_sst.c
+++ b/drivers/staging/intel_sst/intel_sst.c
@@ -37,6 +37,7 @@
 #include <linux/firmware.h>
 #include <linux/miscdevice.h>
 #include <linux/pm_runtime.h>
+#include <linux/module.h>
 #include <asm/mrst.h>
 #include "intel_sst.h"
 #include "intel_sst_ioctl.h"
diff --git a/drivers/staging/intel_sst/intel_sst_drv_interface.c b/drivers/staging/intel_sst/intel_sst_drv_interface.c
index 69daa14..22bd29c 100644
--- a/drivers/staging/intel_sst/intel_sst_drv_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_drv_interface.c
@@ -33,6 +33,7 @@
 #include <linux/fs.h>
 #include <linux/firmware.h>
 #include <linux/pm_runtime.h>
+#include <linux/export.h>
 #include "intel_sst.h"
 #include "intel_sst_ioctl.h"
 #include "intel_sst_fw_ipc.h"
diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 61db1f9..8e73983 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -11,6 +11,7 @@
 
 #include <sound/core.h>
 #include <sound/initval.h>
+#include <linux/export.h>
 
 #include "driver.h"
 #include "audio.h"
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
new file mode 100644
index 0000000..7e5caa3
--- /dev/null
+++ b/drivers/staging/media/Kconfig
@@ -0,0 +1,37 @@
+menuconfig STAGING_MEDIA
+        bool "Media staging drivers"
+        default n
+        ---help---
+          This option allows you to select a number of media drivers that
+	  don't have the "normal" Linux kernel quality level.
+	  Most of them don't follow properly the V4L, DVB and/or RC API's,
+	  so, they won't likely work fine with the existing applications.
+	  That also means that, one fixed, their API's will change to match
+	  the existing ones.
+
+          If you wish to work on these drivers, to help improve them, or
+          to report problems you have with them, please use the
+	  linux-media@vger.kernel.org mailing list.
+
+          If in doubt, say N here.
+
+
+if STAGING_MEDIA
+
+# Please keep them in alphabetic order
+source "drivers/staging/media/as102/Kconfig"
+
+source "drivers/staging/media/cxd2099/Kconfig"
+
+source "drivers/staging/media/dt3155v4l/Kconfig"
+
+source "drivers/staging/media/easycap/Kconfig"
+
+source "drivers/staging/media/go7007/Kconfig"
+
+source "drivers/staging/media/solo6x10/Kconfig"
+
+# Keep LIRC at the end, as it has sub-menus
+source "drivers/staging/media/lirc/Kconfig"
+
+endif
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
new file mode 100644
index 0000000..c69124c
--- /dev/null
+++ b/drivers/staging/media/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_DVB_AS102)		+= as102/
+obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
+obj-$(CONFIG_EASYCAP)		+= easycap/
+obj-$(CONFIG_LIRC_STAGING)	+= lirc/
+obj-$(CONFIG_SOLO6X10)		+= solo6x10/
+obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/
+obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
diff --git a/drivers/staging/media/as102/Kconfig b/drivers/staging/media/as102/Kconfig
new file mode 100644
index 0000000..5865029
--- /dev/null
+++ b/drivers/staging/media/as102/Kconfig
@@ -0,0 +1,7 @@
+config DVB_AS102
+	tristate "Abilis AS102 DVB receiver"
+	depends on DVB_CORE && USB && I2C && INPUT
+	help
+	  Choose Y or M here if you have a device containing an AS102
+
+	  To compile this driver as a module, choose M here
diff --git a/drivers/staging/media/as102/Makefile b/drivers/staging/media/as102/Makefile
new file mode 100644
index 0000000..e7dbb6f
--- /dev/null
+++ b/drivers/staging/media/as102/Makefile
@@ -0,0 +1,6 @@
+dvb-as102-objs := as102_drv.o as102_fw.o as10x_cmd.o as10x_cmd_stream.o \
+		as102_fe.o as102_usb_drv.o as10x_cmd_cfg.o
+
+obj-$(CONFIG_DVB_AS102) += dvb-as102.o
+
+EXTRA_CFLAGS += -DCONFIG_AS102_USB -Idrivers/media/dvb/dvb-core
diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c
new file mode 100644
index 0000000..828526d
--- /dev/null
+++ b/drivers/staging/media/as102/as102_drv.c
@@ -0,0 +1,351 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/kref.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+
+/* header file for Usb device driver*/
+#include "as102_drv.h"
+#include "as102_fw.h"
+#include "dvbdev.h"
+
+int as102_debug;
+module_param_named(debug, as102_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
+
+int dual_tuner;
+module_param_named(dual_tuner, dual_tuner, int, 0644);
+MODULE_PARM_DESC(dual_tuner, "Activate Dual-Tuner config (default: off)");
+
+static int fw_upload = 1;
+module_param_named(fw_upload, fw_upload, int, 0644);
+MODULE_PARM_DESC(fw_upload, "Turn on/off default FW upload (default: on)");
+
+static int pid_filtering;
+module_param_named(pid_filtering, pid_filtering, int, 0644);
+MODULE_PARM_DESC(pid_filtering, "Activate HW PID filtering (default: off)");
+
+static int ts_auto_disable;
+module_param_named(ts_auto_disable, ts_auto_disable, int, 0644);
+MODULE_PARM_DESC(ts_auto_disable, "Stream Auto Enable on FW (default: off)");
+
+int elna_enable = 1;
+module_param_named(elna_enable, elna_enable, int, 0644);
+MODULE_PARM_DESC(elna_enable, "Activate eLNA (default: on)");
+
+#ifdef DVB_DEFINE_MOD_OPT_ADAPTER_NR
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+#endif
+
+static void as102_stop_stream(struct as102_dev_t *dev)
+{
+	struct as102_bus_adapter_t *bus_adap;
+
+	if (dev != NULL)
+		bus_adap = &dev->bus_adap;
+	else
+		return;
+
+	if (bus_adap->ops->stop_stream != NULL)
+		bus_adap->ops->stop_stream(dev);
+
+	if (ts_auto_disable) {
+		if (mutex_lock_interruptible(&dev->bus_adap.lock))
+			return;
+
+		if (as10x_cmd_stop_streaming(bus_adap) < 0)
+			dprintk(debug, "as10x_cmd_stop_streaming failed\n");
+
+		mutex_unlock(&dev->bus_adap.lock);
+	}
+}
+
+static int as102_start_stream(struct as102_dev_t *dev)
+{
+	struct as102_bus_adapter_t *bus_adap;
+	int ret = -EFAULT;
+
+	if (dev != NULL)
+		bus_adap = &dev->bus_adap;
+	else
+		return ret;
+
+	if (bus_adap->ops->start_stream != NULL)
+		ret = bus_adap->ops->start_stream(dev);
+
+	if (ts_auto_disable) {
+		if (mutex_lock_interruptible(&dev->bus_adap.lock))
+			return -EFAULT;
+
+		ret = as10x_cmd_start_streaming(bus_adap);
+
+		mutex_unlock(&dev->bus_adap.lock);
+	}
+
+	return ret;
+}
+
+static int as10x_pid_filter(struct as102_dev_t *dev,
+			    int index, u16 pid, int onoff) {
+
+	struct as102_bus_adapter_t *bus_adap = &dev->bus_adap;
+	int ret = -EFAULT;
+
+	ENTER();
+
+	if (mutex_lock_interruptible(&dev->bus_adap.lock)) {
+		dprintk(debug, "mutex_lock_interruptible(lock) failed !\n");
+		return -EBUSY;
+	}
+
+	switch (onoff) {
+	case 0:
+	    ret = as10x_cmd_del_PID_filter(bus_adap, (uint16_t) pid);
+	    dprintk(debug, "DEL_PID_FILTER([%02d] 0x%04x) ret = %d\n",
+		    index, pid, ret);
+	    break;
+	case 1:
+	{
+	    struct as10x_ts_filter filter;
+
+	    filter.type = TS_PID_TYPE_TS;
+	    filter.idx = 0xFF;
+	    filter.pid = pid;
+
+	    ret = as10x_cmd_add_PID_filter(bus_adap, &filter);
+	    dprintk(debug, "ADD_PID_FILTER([%02d -> %02d], 0x%04x) ret = %d\n",
+		    index, filter.idx, filter.pid, ret);
+	    break;
+	}
+	}
+
+	mutex_unlock(&dev->bus_adap.lock);
+
+	LEAVE();
+	return ret;
+}
+
+static int as102_dvb_dmx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	int ret = 0;
+	struct dvb_demux *demux = dvbdmxfeed->demux;
+	struct as102_dev_t *as102_dev = demux->priv;
+
+	ENTER();
+
+	if (mutex_lock_interruptible(&as102_dev->sem))
+		return -ERESTARTSYS;
+
+	if (pid_filtering) {
+		as10x_pid_filter(as102_dev,
+				dvbdmxfeed->index, dvbdmxfeed->pid, 1);
+	}
+
+	if (as102_dev->streaming++ == 0)
+		ret = as102_start_stream(as102_dev);
+
+	mutex_unlock(&as102_dev->sem);
+	LEAVE();
+	return ret;
+}
+
+static int as102_dvb_dmx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *demux = dvbdmxfeed->demux;
+	struct as102_dev_t *as102_dev = demux->priv;
+
+	ENTER();
+
+	if (mutex_lock_interruptible(&as102_dev->sem))
+		return -ERESTARTSYS;
+
+	if (--as102_dev->streaming == 0)
+		as102_stop_stream(as102_dev);
+
+	if (pid_filtering) {
+		as10x_pid_filter(as102_dev,
+				dvbdmxfeed->index, dvbdmxfeed->pid, 0);
+	}
+
+	mutex_unlock(&as102_dev->sem);
+	LEAVE();
+	return 0;
+}
+
+int as102_dvb_register(struct as102_dev_t *as102_dev)
+{
+	int ret = 0;
+	ENTER();
+
+	ret = dvb_register_adapter(&as102_dev->dvb_adap,
+				   as102_dev->name,
+				   THIS_MODULE,
+#if defined(CONFIG_AS102_USB)
+				   &as102_dev->bus_adap.usb_dev->dev
+#elif defined(CONFIG_AS102_SPI)
+				   &as102_dev->bus_adap.spi_dev->dev
+#else
+#error >>> dvb_register_adapter <<<
+#endif
+#ifdef DVB_DEFINE_MOD_OPT_ADAPTER_NR
+				   , adapter_nr
+#endif
+				   );
+	if (ret < 0) {
+		err("%s: dvb_register_adapter() failed (errno = %d)",
+		    __func__, ret);
+		goto failed;
+	}
+
+	as102_dev->dvb_dmx.priv = as102_dev;
+	as102_dev->dvb_dmx.filternum = pid_filtering ? 16 : 256;
+	as102_dev->dvb_dmx.feednum = 256;
+	as102_dev->dvb_dmx.start_feed = as102_dvb_dmx_start_feed;
+	as102_dev->dvb_dmx.stop_feed = as102_dvb_dmx_stop_feed;
+
+	as102_dev->dvb_dmx.dmx.capabilities = DMX_TS_FILTERING |
+					      DMX_SECTION_FILTERING;
+
+	as102_dev->dvb_dmxdev.filternum = as102_dev->dvb_dmx.filternum;
+	as102_dev->dvb_dmxdev.demux = &as102_dev->dvb_dmx.dmx;
+	as102_dev->dvb_dmxdev.capabilities = 0;
+
+	ret = dvb_dmx_init(&as102_dev->dvb_dmx);
+	if (ret < 0) {
+		err("%s: dvb_dmx_init() failed (errno = %d)", __func__, ret);
+		goto failed;
+	}
+
+	ret = dvb_dmxdev_init(&as102_dev->dvb_dmxdev, &as102_dev->dvb_adap);
+	if (ret < 0) {
+		err("%s: dvb_dmxdev_init() failed (errno = %d)", __func__,
+		    ret);
+		goto failed;
+	}
+
+	ret = as102_dvb_register_fe(as102_dev, &as102_dev->dvb_fe);
+	if (ret < 0) {
+		err("%s: as102_dvb_register_frontend() failed (errno = %d)",
+		    __func__, ret);
+		goto failed;
+	}
+
+	/* init bus mutex for token locking */
+	mutex_init(&as102_dev->bus_adap.lock);
+
+	/* init start / stop stream mutex */
+	mutex_init(&as102_dev->sem);
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+	/*
+	 * try to load as102 firmware. If firmware upload failed, we'll be
+	 * able to upload it later.
+	 */
+	if (fw_upload)
+		try_then_request_module(as102_fw_upload(&as102_dev->bus_adap),
+				"firmware_class");
+#endif
+
+failed:
+	LEAVE();
+	/* FIXME: free dvb_XXX */
+	return ret;
+}
+
+void as102_dvb_unregister(struct as102_dev_t *as102_dev)
+{
+	ENTER();
+
+	/* unregister as102 frontend */
+	as102_dvb_unregister_fe(&as102_dev->dvb_fe);
+
+	/* unregister demux device */
+	dvb_dmxdev_release(&as102_dev->dvb_dmxdev);
+	dvb_dmx_release(&as102_dev->dvb_dmx);
+
+	/* unregister dvb adapter */
+	dvb_unregister_adapter(&as102_dev->dvb_adap);
+
+	LEAVE();
+}
+
+static int __init as102_driver_init(void)
+{
+	int ret = 0;
+
+	ENTER();
+
+	/* register this driver with the low level subsystem */
+#if defined(CONFIG_AS102_USB)
+	ret = usb_register(&as102_usb_driver);
+	if (ret)
+		err("usb_register failed (ret = %d)", ret);
+#endif
+#if defined(CONFIG_AS102_SPI)
+	ret = spi_register_driver(&as102_spi_driver);
+	if (ret)
+		printk(KERN_ERR "spi_register failed (ret = %d)", ret);
+#endif
+
+	LEAVE();
+	return ret;
+}
+
+/*
+ * Mandatory function : Adds a special section to the module indicating
+ * where initialisation function is defined
+ */
+module_init(as102_driver_init);
+
+/**
+ * as102_driver_exit - as102 driver exit point
+ *
+ * This function is called when device has to be removed.
+ */
+static void __exit as102_driver_exit(void)
+{
+	ENTER();
+	/* deregister this driver with the low level bus subsystem */
+#if defined(CONFIG_AS102_USB)
+	usb_deregister(&as102_usb_driver);
+#endif
+#if defined(CONFIG_AS102_SPI)
+	spi_unregister_driver(&as102_spi_driver);
+#endif
+	LEAVE();
+}
+
+/*
+ * required function for unload: Adds a special section to the module
+ * indicating where unload function is defined
+ */
+module_exit(as102_driver_exit);
+/* modinfo details */
+MODULE_DESCRIPTION(DRIVER_FULL_NAME);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pierrick Hascoet <pierrick.hascoet@abilis.com>");
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h
new file mode 100644
index 0000000..fd33f5a
--- /dev/null
+++ b/drivers/staging/media/as102/as102_drv.h
@@ -0,0 +1,142 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_AS102_USB)
+#include <linux/usb.h>
+extern struct usb_driver as102_usb_driver;
+#endif
+
+#if defined(CONFIG_AS102_SPI)
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/cdev.h>
+
+extern struct spi_driver as102_spi_driver;
+#endif
+
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dmxdev.h"
+
+#define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
+#define DRIVER_NAME "as10x_usb"
+
+extern int as102_debug;
+#define debug	as102_debug
+
+#define dprintk(debug, args...) \
+	do { if (debug) {	\
+		printk(KERN_DEBUG "%s: ",__FUNCTION__);	\
+		printk(args);	\
+	} } while (0)
+
+#ifdef TRACE
+#define ENTER()                 printk(">> enter %s\n", __FUNCTION__)
+#define LEAVE()                 printk("<< leave %s\n", __FUNCTION__)
+#else
+#define ENTER()
+#define LEAVE()
+#endif
+
+#define AS102_DEVICE_MAJOR	192
+
+#define AS102_USB_BUF_SIZE	512
+#define MAX_STREAM_URB		32
+
+#include "as10x_cmd.h"
+
+#if defined(CONFIG_AS102_USB)
+#include "as102_usb_drv.h"
+#endif
+
+#if defined(CONFIG_AS102_SPI)
+#include "as10x_spi_drv.h"
+#endif
+
+
+struct as102_bus_adapter_t {
+#if defined(CONFIG_AS102_USB)
+	struct usb_device *usb_dev;
+#elif defined(CONFIG_AS102_SPI)
+	struct spi_device *spi_dev;
+	struct cdev cdev; /* spidev raw device */
+
+	struct timer_list timer;
+	struct completion xfer_done;
+#endif
+	/* bus token lock */
+	struct mutex lock;
+	/* low level interface for bus adapter */
+	union as10x_bus_token_t {
+#if defined(CONFIG_AS102_USB)
+		/* usb token */
+		struct as10x_usb_token_cmd_t usb;
+#endif
+#if defined(CONFIG_AS102_SPI)
+		/* spi token */
+		struct as10x_spi_token_cmd_t spi;
+#endif
+	} token;
+
+	/* token cmd xfer id */
+	uint16_t cmd_xid;
+
+	/* as10x command and response for dvb interface*/
+	struct as10x_cmd_t *cmd, *rsp;
+
+	/* bus adapter private ops callback */
+	struct as102_priv_ops_t *ops;
+};
+
+struct as102_dev_t {
+	const char *name;
+	struct as102_bus_adapter_t bus_adap;
+	struct list_head device_entry;
+	struct kref kref;
+	unsigned long minor;
+
+	struct dvb_adapter dvb_adap;
+	struct dvb_frontend dvb_fe;
+	struct dvb_demux dvb_dmx;
+	struct dmxdev dvb_dmxdev;
+
+	/* demodulator stats */
+	struct as10x_demod_stats demod_stats;
+	/* signal strength */
+	uint16_t signal_strength;
+	/* bit error rate */
+	uint32_t ber;
+
+	/* timer handle to trig ts stream download */
+	struct timer_list timer_handle;
+
+	struct mutex sem;
+	dma_addr_t dma_addr;
+	void *stream;
+	int streaming;
+	struct urb *stream_urb[MAX_STREAM_URB];
+};
+
+int as102_dvb_register(struct as102_dev_t *dev);
+void as102_dvb_unregister(struct as102_dev_t *dev);
+
+int as102_dvb_register_fe(struct as102_dev_t *dev, struct dvb_frontend *fe);
+int as102_dvb_unregister_fe(struct dvb_frontend *dev);
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c
new file mode 100644
index 0000000..3550f90
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fe.c
@@ -0,0 +1,603 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/version.h>
+
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+extern int elna_enable;
+
+static void as10x_fe_copy_tps_parameters(struct dvb_frontend_parameters *dst,
+					 struct as10x_tps *src);
+
+static void as102_fe_copy_tune_parameters(struct as10x_tune_args *dst,
+					  struct dvb_frontend_parameters *src);
+
+static int as102_fe_set_frontend(struct dvb_frontend *fe,
+				 struct dvb_frontend_parameters *params)
+{
+	int ret = 0;
+	struct as102_dev_t *dev;
+	struct as10x_tune_args tune_args = { 0 };
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&dev->bus_adap.lock))
+		return -EBUSY;
+
+	as102_fe_copy_tune_parameters(&tune_args, params);
+
+	/* send abilis command: SET_TUNE */
+	ret =  as10x_cmd_set_tune(&dev->bus_adap, &tune_args);
+	if (ret != 0)
+		dprintk(debug, "as10x_cmd_set_tune failed. (err = %d)\n", ret);
+
+	mutex_unlock(&dev->bus_adap.lock);
+
+	LEAVE();
+	return (ret < 0) ? -EINVAL : 0;
+}
+
+static int as102_fe_get_frontend(struct dvb_frontend *fe,
+				 struct dvb_frontend_parameters *p) {
+	int ret = 0;
+	struct as102_dev_t *dev;
+	struct as10x_tps tps = { 0 };
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&dev->bus_adap.lock))
+		return -EBUSY;
+
+	/* send abilis command: GET_TPS */
+	ret = as10x_cmd_get_tps(&dev->bus_adap, &tps);
+
+	if (ret == 0)
+		as10x_fe_copy_tps_parameters(p, &tps);
+
+	mutex_unlock(&dev->bus_adap.lock);
+
+	LEAVE();
+	return (ret < 0) ? -EINVAL : 0;
+}
+
+static int as102_fe_get_tune_settings(struct dvb_frontend *fe,
+			struct dvb_frontend_tune_settings *settings) {
+	ENTER();
+
+#if 0
+	dprintk(debug, "step_size    = %d\n", settings->step_size);
+	dprintk(debug, "max_drift    = %d\n", settings->max_drift);
+	dprintk(debug, "min_delay_ms = %d -> %d\n", settings->min_delay_ms,
+		1000);
+#endif
+
+	settings->min_delay_ms = 1000;
+
+	LEAVE();
+	return 0;
+}
+
+
+static int as102_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	int ret = 0;
+	struct as102_dev_t *dev;
+	struct as10x_tune_status tstate = { 0 };
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&dev->bus_adap.lock))
+		return -EBUSY;
+
+	/* send abilis command: GET_TUNE_STATUS */
+	ret = as10x_cmd_get_tune_status(&dev->bus_adap, &tstate);
+	if (ret < 0) {
+		dprintk(debug, "as10x_cmd_get_tune_status failed (err = %d)\n",
+			ret);
+		goto out;
+	}
+
+	dev->signal_strength  = tstate.signal_strength;
+	dev->ber  = tstate.BER;
+
+	switch (tstate.tune_state) {
+	case TUNE_STATUS_SIGNAL_DVB_OK:
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+		break;
+	case TUNE_STATUS_STREAM_DETECTED:
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC;
+		break;
+	case TUNE_STATUS_STREAM_TUNED:
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC |
+			FE_HAS_LOCK;
+		break;
+	default:
+		*status = TUNE_STATUS_NOT_TUNED;
+	}
+
+	dprintk(debug, "tuner status: 0x%02x, strength %d, per: %d, ber: %d\n",
+			tstate.tune_state, tstate.signal_strength,
+			tstate.PER, tstate.BER);
+
+	if (*status & FE_HAS_LOCK) {
+		if (as10x_cmd_get_demod_stats(&dev->bus_adap,
+			(struct as10x_demod_stats *) &dev->demod_stats) < 0) {
+			memset(&dev->demod_stats, 0, sizeof(dev->demod_stats));
+			dprintk(debug, "as10x_cmd_get_demod_stats failed "
+				"(probably not tuned)\n");
+		} else {
+			dprintk(debug,
+				"demod status: fc: 0x%08x, bad fc: 0x%08x, "
+				"bytes corrected: 0x%08x , MER: 0x%04x\n",
+				dev->demod_stats.frame_count,
+				dev->demod_stats.bad_frame_count,
+				dev->demod_stats.bytes_fixed_by_rs,
+				dev->demod_stats.mer);
+		}
+	} else {
+		memset(&dev->demod_stats, 0, sizeof(dev->demod_stats));
+	}
+
+out:
+	mutex_unlock(&dev->bus_adap.lock);
+	LEAVE();
+	return ret;
+}
+
+/*
+ * Note:
+ * - in AS102 SNR=MER
+ *   - the SNR will be returned in linear terms, i.e. not in dB
+ *   - the accuracy equals ±2dB for a SNR range from 4dB to 30dB
+ *   - the accuracy is >2dB for SNR values outside this range
+ */
+static int as102_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct as102_dev_t *dev;
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	*snr = dev->demod_stats.mer;
+
+	LEAVE();
+	return 0;
+}
+
+static int as102_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct as102_dev_t *dev;
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	*ber = dev->ber;
+
+	LEAVE();
+	return 0;
+}
+
+static int as102_fe_read_signal_strength(struct dvb_frontend *fe,
+					 u16 *strength)
+{
+	struct as102_dev_t *dev;
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	*strength = (((0xffff * 400) * dev->signal_strength + 41000) * 2);
+
+	LEAVE();
+	return 0;
+}
+
+static int as102_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct as102_dev_t *dev;
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (dev->demod_stats.has_started)
+		*ucblocks = dev->demod_stats.bad_frame_count;
+	else
+		*ucblocks = 0;
+
+	LEAVE();
+	return 0;
+}
+
+static int as102_fe_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
+{
+	struct as102_dev_t *dev;
+	int ret;
+
+	ENTER();
+
+	dev = (struct as102_dev_t *) fe->tuner_priv;
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&dev->bus_adap.lock))
+		return -EBUSY;
+
+	if (acquire) {
+		if (elna_enable)
+			as10x_cmd_set_context(&dev->bus_adap, 1010, 0xC0);
+
+		ret = as10x_cmd_turn_on(&dev->bus_adap);
+	} else {
+		ret = as10x_cmd_turn_off(&dev->bus_adap);
+	}
+
+	mutex_unlock(&dev->bus_adap.lock);
+
+	LEAVE();
+	return ret;
+}
+
+static struct dvb_frontend_ops as102_fe_ops = {
+	.info = {
+		.name			= "Unknown AS102 device",
+		.type			= FE_OFDM,
+		.frequency_min		= 174000000,
+		.frequency_max		= 862000000,
+		.frequency_stepsize	= 166667,
+		.caps = FE_CAN_INVERSION_AUTO
+			| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4
+			| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO
+			| FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QPSK
+			| FE_CAN_QAM_AUTO
+			| FE_CAN_TRANSMISSION_MODE_AUTO
+			| FE_CAN_GUARD_INTERVAL_AUTO
+			| FE_CAN_HIERARCHY_AUTO
+			| FE_CAN_RECOVER
+			| FE_CAN_MUTE_TS
+	},
+
+	.set_frontend		= as102_fe_set_frontend,
+	.get_frontend		= as102_fe_get_frontend,
+	.get_tune_settings	= as102_fe_get_tune_settings,
+
+	.read_status		= as102_fe_read_status,
+	.read_snr		= as102_fe_read_snr,
+	.read_ber		= as102_fe_read_ber,
+	.read_signal_strength	= as102_fe_read_signal_strength,
+	.read_ucblocks		= as102_fe_read_ucblocks,
+	.ts_bus_ctrl		= as102_fe_ts_bus_ctrl,
+};
+
+int as102_dvb_unregister_fe(struct dvb_frontend *fe)
+{
+	/* unregister frontend */
+	dvb_unregister_frontend(fe);
+
+	/* detach frontend */
+	dvb_frontend_detach(fe);
+
+	return 0;
+}
+
+int as102_dvb_register_fe(struct as102_dev_t *as102_dev,
+			  struct dvb_frontend *dvb_fe)
+{
+	int errno;
+	struct dvb_adapter *dvb_adap;
+
+	if (as102_dev == NULL)
+		return -EINVAL;
+
+	/* extract dvb_adapter */
+	dvb_adap = &as102_dev->dvb_adap;
+
+	/* init frontend callback ops */
+	memcpy(&dvb_fe->ops, &as102_fe_ops, sizeof(struct dvb_frontend_ops));
+	strncpy(dvb_fe->ops.info.name, as102_dev->name,
+		sizeof(dvb_fe->ops.info.name));
+
+	/* register dbvb frontend */
+	errno = dvb_register_frontend(dvb_adap, dvb_fe);
+	if (errno == 0)
+		dvb_fe->tuner_priv = as102_dev;
+
+	return errno;
+}
+
+static void as10x_fe_copy_tps_parameters(struct dvb_frontend_parameters *dst,
+					 struct as10x_tps *as10x_tps)
+{
+
+	struct dvb_ofdm_parameters *fe_tps = &dst->u.ofdm;
+
+	/* extract consteallation */
+	switch (as10x_tps->constellation) {
+	case CONST_QPSK:
+		fe_tps->constellation = QPSK;
+		break;
+	case CONST_QAM16:
+		fe_tps->constellation = QAM_16;
+		break;
+	case CONST_QAM64:
+		fe_tps->constellation = QAM_64;
+		break;
+	}
+
+	/* extract hierarchy */
+	switch (as10x_tps->hierarchy) {
+	case HIER_NONE:
+		fe_tps->hierarchy_information = HIERARCHY_NONE;
+		break;
+	case HIER_ALPHA_1:
+		fe_tps->hierarchy_information = HIERARCHY_1;
+		break;
+	case HIER_ALPHA_2:
+		fe_tps->hierarchy_information = HIERARCHY_2;
+		break;
+	case HIER_ALPHA_4:
+		fe_tps->hierarchy_information = HIERARCHY_4;
+		break;
+	}
+
+	/* extract code rate HP */
+	switch (as10x_tps->code_rate_HP) {
+	case CODE_RATE_1_2:
+		fe_tps->code_rate_HP = FEC_1_2;
+		break;
+	case CODE_RATE_2_3:
+		fe_tps->code_rate_HP = FEC_2_3;
+		break;
+	case CODE_RATE_3_4:
+		fe_tps->code_rate_HP = FEC_3_4;
+		break;
+	case CODE_RATE_5_6:
+		fe_tps->code_rate_HP = FEC_5_6;
+		break;
+	case CODE_RATE_7_8:
+		fe_tps->code_rate_HP = FEC_7_8;
+		break;
+	}
+
+	/* extract code rate LP */
+	switch (as10x_tps->code_rate_LP) {
+	case CODE_RATE_1_2:
+		fe_tps->code_rate_LP = FEC_1_2;
+		break;
+	case CODE_RATE_2_3:
+		fe_tps->code_rate_LP = FEC_2_3;
+		break;
+	case CODE_RATE_3_4:
+		fe_tps->code_rate_LP = FEC_3_4;
+		break;
+	case CODE_RATE_5_6:
+		fe_tps->code_rate_LP = FEC_5_6;
+		break;
+	case CODE_RATE_7_8:
+		fe_tps->code_rate_LP = FEC_7_8;
+		break;
+	}
+
+	/* extract guard interval */
+	switch (as10x_tps->guard_interval) {
+	case GUARD_INT_1_32:
+		fe_tps->guard_interval = GUARD_INTERVAL_1_32;
+		break;
+	case GUARD_INT_1_16:
+		fe_tps->guard_interval = GUARD_INTERVAL_1_16;
+		break;
+	case GUARD_INT_1_8:
+		fe_tps->guard_interval = GUARD_INTERVAL_1_8;
+		break;
+	case GUARD_INT_1_4:
+		fe_tps->guard_interval = GUARD_INTERVAL_1_4;
+		break;
+	}
+
+	/* extract transmission mode */
+	switch (as10x_tps->transmission_mode) {
+	case TRANS_MODE_2K:
+		fe_tps->transmission_mode = TRANSMISSION_MODE_2K;
+		break;
+	case TRANS_MODE_8K:
+		fe_tps->transmission_mode = TRANSMISSION_MODE_8K;
+		break;
+	}
+}
+
+static uint8_t as102_fe_get_code_rate(fe_code_rate_t arg)
+{
+	uint8_t c;
+
+	switch (arg) {
+	case FEC_1_2:
+		c = CODE_RATE_1_2;
+		break;
+	case FEC_2_3:
+		c = CODE_RATE_2_3;
+		break;
+	case FEC_3_4:
+		c = CODE_RATE_3_4;
+		break;
+	case FEC_5_6:
+		c = CODE_RATE_5_6;
+		break;
+	case FEC_7_8:
+		c = CODE_RATE_7_8;
+		break;
+	default:
+		c = CODE_RATE_UNKNOWN;
+		break;
+	}
+
+	return c;
+}
+
+static void as102_fe_copy_tune_parameters(struct as10x_tune_args *tune_args,
+			  struct dvb_frontend_parameters *params)
+{
+
+	/* set frequency */
+	tune_args->freq = params->frequency / 1000;
+
+	/* fix interleaving_mode */
+	tune_args->interleaving_mode = INTLV_NATIVE;
+
+	switch (params->u.ofdm.bandwidth) {
+	case BANDWIDTH_8_MHZ:
+		tune_args->bandwidth = BW_8_MHZ;
+		break;
+	case BANDWIDTH_7_MHZ:
+		tune_args->bandwidth = BW_7_MHZ;
+		break;
+	case BANDWIDTH_6_MHZ:
+		tune_args->bandwidth = BW_6_MHZ;
+		break;
+	default:
+		tune_args->bandwidth = BW_8_MHZ;
+	}
+
+	switch (params->u.ofdm.guard_interval) {
+	case GUARD_INTERVAL_1_32:
+		tune_args->guard_interval = GUARD_INT_1_32;
+		break;
+	case GUARD_INTERVAL_1_16:
+		tune_args->guard_interval = GUARD_INT_1_16;
+		break;
+	case GUARD_INTERVAL_1_8:
+		tune_args->guard_interval = GUARD_INT_1_8;
+		break;
+	case GUARD_INTERVAL_1_4:
+		tune_args->guard_interval = GUARD_INT_1_4;
+		break;
+	case GUARD_INTERVAL_AUTO:
+	default:
+		tune_args->guard_interval = GUARD_UNKNOWN;
+		break;
+	}
+
+	switch (params->u.ofdm.constellation) {
+	case QPSK:
+		tune_args->constellation = CONST_QPSK;
+		break;
+	case QAM_16:
+		tune_args->constellation = CONST_QAM16;
+		break;
+	case QAM_64:
+		tune_args->constellation = CONST_QAM64;
+		break;
+	default:
+		tune_args->constellation = CONST_UNKNOWN;
+		break;
+	}
+
+	switch (params->u.ofdm.transmission_mode) {
+	case TRANSMISSION_MODE_2K:
+		tune_args->transmission_mode = TRANS_MODE_2K;
+		break;
+	case TRANSMISSION_MODE_8K:
+		tune_args->transmission_mode = TRANS_MODE_8K;
+		break;
+	default:
+		tune_args->transmission_mode = TRANS_MODE_UNKNOWN;
+	}
+
+	switch (params->u.ofdm.hierarchy_information) {
+	case HIERARCHY_NONE:
+		tune_args->hierarchy = HIER_NONE;
+		break;
+	case HIERARCHY_1:
+		tune_args->hierarchy = HIER_ALPHA_1;
+		break;
+	case HIERARCHY_2:
+		tune_args->hierarchy = HIER_ALPHA_2;
+		break;
+	case HIERARCHY_4:
+		tune_args->hierarchy = HIER_ALPHA_4;
+		break;
+	case HIERARCHY_AUTO:
+		tune_args->hierarchy = HIER_UNKNOWN;
+		break;
+	}
+
+	dprintk(debug, "tuner parameters: freq: %d  bw: 0x%02x  gi: 0x%02x\n",
+			params->frequency,
+			tune_args->bandwidth,
+			tune_args->guard_interval);
+
+	/*
+	 * Detect a hierarchy selection
+	 * if HP/LP are both set to FEC_NONE, HP will be selected.
+	 */
+	if ((tune_args->hierarchy != HIER_NONE) &&
+		       ((params->u.ofdm.code_rate_LP == FEC_NONE) ||
+			(params->u.ofdm.code_rate_HP == FEC_NONE))) {
+
+		if (params->u.ofdm.code_rate_LP == FEC_NONE) {
+			tune_args->hier_select = HIER_HIGH_PRIORITY;
+			tune_args->code_rate =
+			   as102_fe_get_code_rate(params->u.ofdm.code_rate_HP);
+		}
+
+		if (params->u.ofdm.code_rate_HP == FEC_NONE) {
+			tune_args->hier_select = HIER_LOW_PRIORITY;
+			tune_args->code_rate =
+			   as102_fe_get_code_rate(params->u.ofdm.code_rate_LP);
+		}
+
+		dprintk(debug, "\thierarchy: 0x%02x  "
+				"selected: %s  code_rate_%s: 0x%02x\n",
+			tune_args->hierarchy,
+			tune_args->hier_select == HIER_HIGH_PRIORITY ?
+			"HP" : "LP",
+			tune_args->hier_select == HIER_HIGH_PRIORITY ?
+			"HP" : "LP",
+			tune_args->code_rate);
+	} else {
+		tune_args->code_rate =
+			as102_fe_get_code_rate(params->u.ofdm.code_rate_HP);
+	}
+}
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c
new file mode 100644
index 0000000..c019df9
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fw.c
@@ -0,0 +1,251 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+
+#include "as102_drv.h"
+#include "as102_fw.h"
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+char as102_st_fw1[] = "as102_data1_st.hex";
+char as102_st_fw2[] = "as102_data2_st.hex";
+char as102_dt_fw1[] = "as102_data1_dt.hex";
+char as102_dt_fw2[] = "as102_data2_dt.hex";
+
+static unsigned char atohx(unsigned char *dst, char *src)
+{
+	unsigned char value = 0;
+
+	char msb = tolower(*src) - '0';
+	char lsb = tolower(*(src + 1)) - '0';
+
+	if (msb > 9)
+		msb -= 7;
+	if (lsb > 9)
+		lsb -= 7;
+
+	*dst = value = ((msb & 0xF) << 4) | (lsb & 0xF);
+	return value;
+}
+
+/*
+ * Parse INTEL HEX firmware file to extract address and data.
+ */
+static int parse_hex_line(unsigned char *fw_data, unsigned char *addr,
+			  unsigned char *data, int *dataLength,
+			  unsigned char *addr_has_changed) {
+
+	int count = 0;
+	unsigned char *src, dst;
+
+	if (*fw_data++ != ':') {
+		printk(KERN_ERR "invalid firmware file\n");
+		return -EFAULT;
+	}
+
+	/* locate end of line */
+	for (src = fw_data; *src != '\n'; src += 2) {
+		atohx(&dst, src);
+		/* parse line to split addr / data */
+		switch (count) {
+		case 0:
+			*dataLength = dst;
+			break;
+		case 1:
+			addr[2] = dst;
+			break;
+		case 2:
+			addr[3] = dst;
+			break;
+		case 3:
+			/* check if data is an address */
+			if (dst == 0x04)
+				*addr_has_changed = 1;
+			else
+				*addr_has_changed = 0;
+			break;
+		case  4:
+		case  5:
+			if (*addr_has_changed)
+				addr[(count - 4)] = dst;
+			else
+				data[(count - 4)] = dst;
+			break;
+		default:
+			data[(count - 4)] = dst;
+			break;
+		}
+		count++;
+	}
+
+	/* return read value + ':' + '\n' */
+	return (count * 2) + 2;
+}
+
+static int as102_firmware_upload(struct as102_bus_adapter_t *bus_adap,
+				 unsigned char *cmd,
+				 const struct firmware *firmware) {
+
+	struct as10x_fw_pkt_t fw_pkt;
+	int total_read_bytes = 0, errno = 0;
+	unsigned char addr_has_changed = 0;
+
+	ENTER();
+
+	for (total_read_bytes = 0; total_read_bytes < firmware->size; ) {
+		int read_bytes = 0, data_len = 0;
+
+		/* parse intel hex line */
+		read_bytes = parse_hex_line(
+				(u8 *) (firmware->data + total_read_bytes),
+				fw_pkt.raw.address,
+				fw_pkt.raw.data,
+				&data_len,
+				&addr_has_changed);
+
+		if (read_bytes <= 0)
+			goto error;
+
+		/* detect the end of file */
+		total_read_bytes += read_bytes;
+		if (total_read_bytes == firmware->size) {
+			fw_pkt.u.request[0] = 0x00;
+			fw_pkt.u.request[1] = 0x03;
+
+			/* send EOF command */
+			errno = bus_adap->ops->upload_fw_pkt(bus_adap,
+							     (uint8_t *)
+							     &fw_pkt, 2, 0);
+			if (errno < 0)
+				goto error;
+		} else {
+			if (!addr_has_changed) {
+				/* prepare command to send */
+				fw_pkt.u.request[0] = 0x00;
+				fw_pkt.u.request[1] = 0x01;
+
+				data_len += sizeof(fw_pkt.u.request);
+				data_len += sizeof(fw_pkt.raw.address);
+
+				/* send cmd to device */
+				errno = bus_adap->ops->upload_fw_pkt(bus_adap,
+								     (uint8_t *)
+								     &fw_pkt,
+								     data_len,
+								     0);
+				if (errno < 0)
+					goto error;
+			}
+		}
+	}
+error:
+	LEAVE();
+	return (errno == 0) ? total_read_bytes : errno;
+}
+
+int as102_fw_upload(struct as102_bus_adapter_t *bus_adap)
+{
+	int errno = -EFAULT;
+	const struct firmware *firmware;
+	unsigned char *cmd_buf = NULL;
+	char *fw1, *fw2;
+
+#if defined(CONFIG_AS102_USB)
+	struct usb_device *dev = bus_adap->usb_dev;
+#endif
+#if defined(CONFIG_AS102_SPI)
+	struct spi_device *dev = bus_adap->spi_dev;
+#endif
+	ENTER();
+
+	/* select fw file to upload */
+	if (dual_tuner) {
+		fw1 = as102_dt_fw1;
+		fw2 = as102_dt_fw2;
+	} else {
+		fw1 = as102_st_fw1;
+		fw2 = as102_st_fw2;
+	}
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+	/* allocate buffer to store firmware upload command and data */
+	cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL);
+	if (cmd_buf == NULL) {
+		errno = -ENOMEM;
+		goto error;
+	}
+
+	/* request kernel to locate firmware file: part1 */
+	errno = request_firmware(&firmware, fw1, &dev->dev);
+	if (errno < 0) {
+		printk(KERN_ERR "%s: unable to locate firmware file: %s\n",
+				 DRIVER_NAME, fw1);
+		goto error;
+	}
+
+	/* initiate firmware upload */
+	errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
+	if (errno < 0) {
+		printk(KERN_ERR "%s: error during firmware upload part1\n",
+				 DRIVER_NAME);
+		goto error;
+	}
+
+	printk(KERN_INFO "%s: fimrware: %s loaded with success\n",
+			 DRIVER_NAME, fw1);
+	release_firmware(firmware);
+
+	/* wait for boot to complete */
+	mdelay(100);
+
+	/* request kernel to locate firmware file: part2 */
+	errno = request_firmware(&firmware, fw2, &dev->dev);
+	if (errno < 0) {
+		printk(KERN_ERR "%s: unable to locate firmware file: %s\n",
+				 DRIVER_NAME, fw2);
+		goto error;
+	}
+
+	/* initiate firmware upload */
+	errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
+	if (errno < 0) {
+		printk(KERN_ERR "%s: error during firmware upload part2\n",
+				 DRIVER_NAME);
+		goto error;
+	}
+
+	printk(KERN_INFO "%s: fimrware: %s loaded with success\n",
+			DRIVER_NAME, fw2);
+error:
+	/* free data buffer */
+	kfree(cmd_buf);
+	/* release firmware if needed */
+	if (firmware != NULL)
+		release_firmware(firmware);
+#endif
+	LEAVE();
+	return errno;
+}
+#endif
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fw.h b/drivers/staging/media/as102/as102_fw.h
new file mode 100644
index 0000000..27e5347
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fw.h
@@ -0,0 +1,42 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#define MAX_FW_PKT_SIZE	64
+
+extern int dual_tuner;
+
+#pragma pack(1)
+struct as10x_raw_fw_pkt {
+	unsigned char address[4];
+	unsigned char data[MAX_FW_PKT_SIZE - 6];
+};
+
+struct as10x_fw_pkt_t {
+	union {
+		unsigned char request[2];
+		unsigned char length[2];
+	} u;
+	struct as10x_raw_fw_pkt raw;
+};
+#pragma pack()
+
+#ifdef __KERNEL__
+int as102_fw_upload(struct as102_bus_adapter_t *bus_adap);
+#endif
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c
new file mode 100644
index 0000000..264be2d
--- /dev/null
+++ b/drivers/staging/media/as102/as102_usb_drv.c
@@ -0,0 +1,478 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/usb.h>
+
+#include "as102_drv.h"
+#include "as102_usb_drv.h"
+#include "as102_fw.h"
+
+static void as102_usb_disconnect(struct usb_interface *interface);
+static int as102_usb_probe(struct usb_interface *interface,
+			   const struct usb_device_id *id);
+
+static int as102_usb_start_stream(struct as102_dev_t *dev);
+static void as102_usb_stop_stream(struct as102_dev_t *dev);
+
+static int as102_open(struct inode *inode, struct file *file);
+static int as102_release(struct inode *inode, struct file *file);
+
+static struct usb_device_id as102_usb_id_table[] = {
+	{ USB_DEVICE(AS102_USB_DEVICE_VENDOR_ID, AS102_USB_DEVICE_PID_0001) },
+	{ USB_DEVICE(PCTV_74E_USB_VID, PCTV_74E_USB_PID) },
+	{ USB_DEVICE(ELGATO_EYETV_DTT_USB_VID, ELGATO_EYETV_DTT_USB_PID) },
+	{ USB_DEVICE(NBOX_DVBT_DONGLE_USB_VID, NBOX_DVBT_DONGLE_USB_PID) },
+	{ } /* Terminating entry */
+};
+
+/* Note that this table must always have the same number of entries as the
+   as102_usb_id_table struct */
+static const char *as102_device_names[] = {
+	AS102_REFERENCE_DESIGN,
+	AS102_PCTV_74E,
+	AS102_ELGATO_EYETV_DTT_NAME,
+	AS102_NBOX_DVBT_DONGLE_NAME,
+	NULL /* Terminating entry */
+};
+
+struct usb_driver as102_usb_driver = {
+	.name       =  DRIVER_FULL_NAME,
+	.probe      =  as102_usb_probe,
+	.disconnect =  as102_usb_disconnect,
+	.id_table   =  as102_usb_id_table
+};
+
+static const struct file_operations as102_dev_fops = {
+	.owner   = THIS_MODULE,
+	.open    = as102_open,
+	.release = as102_release,
+};
+
+static struct usb_class_driver as102_usb_class_driver = {
+	.name		= "aton2-%d",
+	.fops		= &as102_dev_fops,
+	.minor_base	= AS102_DEVICE_MAJOR,
+};
+
+static int as102_usb_xfer_cmd(struct as102_bus_adapter_t *bus_adap,
+			      unsigned char *send_buf, int send_buf_len,
+			      unsigned char *recv_buf, int recv_buf_len)
+{
+	int ret = 0;
+	ENTER();
+
+	if (send_buf != NULL) {
+		ret = usb_control_msg(bus_adap->usb_dev,
+				      usb_sndctrlpipe(bus_adap->usb_dev, 0),
+				      AS102_USB_DEVICE_TX_CTRL_CMD,
+				      USB_DIR_OUT | USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE,
+				      bus_adap->cmd_xid, /* value */
+				      0, /* index */
+				      send_buf, send_buf_len,
+				      USB_CTRL_SET_TIMEOUT /* 200 */);
+		if (ret < 0) {
+			dprintk(debug, "usb_control_msg(send) failed, err %i\n",
+					ret);
+			return ret;
+		}
+
+		if (ret != send_buf_len) {
+			dprintk(debug, "only wrote %d of %d bytes\n",
+					ret, send_buf_len);
+			return -1;
+		}
+	}
+
+	if (recv_buf != NULL) {
+#ifdef TRACE
+		dprintk(debug, "want to read: %d bytes\n", recv_buf_len);
+#endif
+		ret = usb_control_msg(bus_adap->usb_dev,
+				      usb_rcvctrlpipe(bus_adap->usb_dev, 0),
+				      AS102_USB_DEVICE_RX_CTRL_CMD,
+				      USB_DIR_IN | USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE,
+				      bus_adap->cmd_xid, /* value */
+				      0, /* index */
+				      recv_buf, recv_buf_len,
+				      USB_CTRL_GET_TIMEOUT /* 200 */);
+		if (ret < 0) {
+			dprintk(debug, "usb_control_msg(recv) failed, err %i\n",
+					ret);
+			return ret;
+		}
+#ifdef TRACE
+		dprintk(debug, "read %d bytes\n", recv_buf_len);
+#endif
+	}
+
+	LEAVE();
+	return ret;
+}
+
+static int as102_send_ep1(struct as102_bus_adapter_t *bus_adap,
+			  unsigned char *send_buf,
+			  int send_buf_len,
+			  int swap32)
+{
+	int ret = 0, actual_len;
+
+	ret = usb_bulk_msg(bus_adap->usb_dev,
+			   usb_sndbulkpipe(bus_adap->usb_dev, 1),
+			   send_buf, send_buf_len, &actual_len, 200);
+	if (ret) {
+		dprintk(debug, "usb_bulk_msg(send) failed, err %i\n", ret);
+		return ret;
+	}
+
+	if (actual_len != send_buf_len) {
+		dprintk(debug, "only wrote %d of %d bytes\n",
+				actual_len, send_buf_len);
+		return -1;
+	}
+	return ret ? ret : actual_len;
+}
+
+static int as102_read_ep2(struct as102_bus_adapter_t *bus_adap,
+		   unsigned char *recv_buf, int recv_buf_len)
+{
+	int ret = 0, actual_len;
+
+	if (recv_buf == NULL)
+		return -EINVAL;
+
+	ret = usb_bulk_msg(bus_adap->usb_dev,
+			   usb_rcvbulkpipe(bus_adap->usb_dev, 2),
+			   recv_buf, recv_buf_len, &actual_len, 200);
+	if (ret) {
+		dprintk(debug, "usb_bulk_msg(recv) failed, err %i\n", ret);
+		return ret;
+	}
+
+	if (actual_len != recv_buf_len) {
+		dprintk(debug, "only read %d of %d bytes\n",
+				actual_len, recv_buf_len);
+		return -1;
+	}
+	return ret ? ret : actual_len;
+}
+
+struct as102_priv_ops_t as102_priv_ops = {
+	.upload_fw_pkt	= as102_send_ep1,
+	.xfer_cmd	= as102_usb_xfer_cmd,
+	.as102_read_ep2	= as102_read_ep2,
+	.start_stream	= as102_usb_start_stream,
+	.stop_stream	= as102_usb_stop_stream,
+};
+
+static int as102_submit_urb_stream(struct as102_dev_t *dev, struct urb *urb)
+{
+	int err;
+
+	usb_fill_bulk_urb(urb,
+			  dev->bus_adap.usb_dev,
+			  usb_rcvbulkpipe(dev->bus_adap.usb_dev, 0x2),
+			  urb->transfer_buffer,
+			  AS102_USB_BUF_SIZE,
+			  as102_urb_stream_irq,
+			  dev);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err)
+		dprintk(debug, "%s: usb_submit_urb failed\n", __func__);
+
+	return err;
+}
+
+void as102_urb_stream_irq(struct urb *urb)
+{
+	struct as102_dev_t *as102_dev = urb->context;
+
+	if (urb->actual_length > 0) {
+		dvb_dmx_swfilter(&as102_dev->dvb_dmx,
+				 urb->transfer_buffer,
+				 urb->actual_length);
+	} else {
+		if (urb->actual_length == 0)
+			memset(urb->transfer_buffer, 0, AS102_USB_BUF_SIZE);
+	}
+
+	/* is not stopped, re-submit urb */
+	if (as102_dev->streaming)
+		as102_submit_urb_stream(as102_dev, urb);
+}
+
+static void as102_free_usb_stream_buffer(struct as102_dev_t *dev)
+{
+	int i;
+
+	ENTER();
+
+	for (i = 0; i < MAX_STREAM_URB; i++)
+		usb_free_urb(dev->stream_urb[i]);
+
+	usb_free_coherent(dev->bus_adap.usb_dev,
+			MAX_STREAM_URB * AS102_USB_BUF_SIZE,
+			dev->stream,
+			dev->dma_addr);
+	LEAVE();
+}
+
+static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev)
+{
+	int i, ret = 0;
+
+	ENTER();
+
+	dev->stream = usb_alloc_coherent(dev->bus_adap.usb_dev,
+				       MAX_STREAM_URB * AS102_USB_BUF_SIZE,
+				       GFP_KERNEL,
+				       &dev->dma_addr);
+	if (!dev->stream) {
+		dprintk(debug, "%s: usb_buffer_alloc failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(dev->stream, 0, MAX_STREAM_URB * AS102_USB_BUF_SIZE);
+
+	/* init urb buffers */
+	for (i = 0; i < MAX_STREAM_URB; i++) {
+		struct urb *urb;
+
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (urb == NULL) {
+			dprintk(debug, "%s: usb_alloc_urb failed\n", __func__);
+			as102_free_usb_stream_buffer(dev);
+			return -ENOMEM;
+		}
+
+		urb->transfer_buffer = dev->stream + (i * AS102_USB_BUF_SIZE);
+		urb->transfer_buffer_length = AS102_USB_BUF_SIZE;
+
+		dev->stream_urb[i] = urb;
+	}
+	LEAVE();
+	return ret;
+}
+
+static void as102_usb_stop_stream(struct as102_dev_t *dev)
+{
+	int i;
+
+	for (i = 0; i < MAX_STREAM_URB; i++)
+		usb_kill_urb(dev->stream_urb[i]);
+}
+
+static int as102_usb_start_stream(struct as102_dev_t *dev)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < MAX_STREAM_URB; i++) {
+		ret = as102_submit_urb_stream(dev, dev->stream_urb[i]);
+		if (ret) {
+			as102_usb_stop_stream(dev);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void as102_usb_release(struct kref *kref)
+{
+	struct as102_dev_t *as102_dev;
+
+	ENTER();
+
+	as102_dev = container_of(kref, struct as102_dev_t, kref);
+	if (as102_dev != NULL) {
+		usb_put_dev(as102_dev->bus_adap.usb_dev);
+		kfree(as102_dev);
+	}
+
+	LEAVE();
+}
+
+static void as102_usb_disconnect(struct usb_interface *intf)
+{
+	struct as102_dev_t *as102_dev;
+
+	ENTER();
+
+	/* extract as102_dev_t from usb_device private data */
+	as102_dev = usb_get_intfdata(intf);
+
+	/* unregister dvb layer */
+	as102_dvb_unregister(as102_dev);
+
+	/* free usb buffers */
+	as102_free_usb_stream_buffer(as102_dev);
+
+	usb_set_intfdata(intf, NULL);
+
+	/* usb unregister device */
+	usb_deregister_dev(intf, &as102_usb_class_driver);
+
+	/* decrement usage counter */
+	kref_put(&as102_dev->kref, as102_usb_release);
+
+	printk(KERN_INFO "%s: device has been disconnected\n", DRIVER_NAME);
+
+	LEAVE();
+}
+
+static int as102_usb_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	int ret;
+	struct as102_dev_t *as102_dev;
+	int i;
+
+	ENTER();
+
+	as102_dev = kzalloc(sizeof(struct as102_dev_t), GFP_KERNEL);
+	if (as102_dev == NULL) {
+		err("%s: kzalloc failed", __func__);
+		return -ENOMEM;
+	}
+
+	/* This should never actually happen */
+	if ((sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)) !=
+	    (sizeof(as102_device_names) / sizeof(const char *))) {
+		printk(KERN_ERR "Device names table invalid size");
+		return -EINVAL;
+	}
+
+	/* Assign the user-friendly device name */
+	for (i = 0; i < (sizeof(as102_usb_id_table) /
+			 sizeof(struct usb_device_id)); i++) {
+		if (id == &as102_usb_id_table[i])
+			as102_dev->name = as102_device_names[i];
+	}
+
+	if (as102_dev->name == NULL)
+		as102_dev->name = "Unknown AS102 device";
+
+	/* set private callback functions */
+	as102_dev->bus_adap.ops = &as102_priv_ops;
+
+	/* init cmd token for usb bus */
+	as102_dev->bus_adap.cmd = &as102_dev->bus_adap.token.usb.c;
+	as102_dev->bus_adap.rsp = &as102_dev->bus_adap.token.usb.r;
+
+	/* init kernel device reference */
+	kref_init(&as102_dev->kref);
+
+	/* store as102 device to usb_device private data */
+	usb_set_intfdata(intf, (void *) as102_dev);
+
+	/* store in as102 device the usb_device pointer */
+	as102_dev->bus_adap.usb_dev = usb_get_dev(interface_to_usbdev(intf));
+
+	/* we can register the device now, as it is ready */
+	ret = usb_register_dev(intf, &as102_usb_class_driver);
+	if (ret < 0) {
+		/* something prevented us from registering this driver */
+		err("%s: usb_register_dev() failed (errno = %d)",
+		    __func__, ret);
+		goto failed;
+	}
+
+	printk(KERN_INFO "%s: device has been detected\n", DRIVER_NAME);
+
+	/* request buffer allocation for streaming */
+	ret = as102_alloc_usb_stream_buffer(as102_dev);
+	if (ret != 0)
+		goto failed;
+
+	/* register dvb layer */
+	ret = as102_dvb_register(as102_dev);
+
+	LEAVE();
+	return ret;
+
+failed:
+	usb_set_intfdata(intf, NULL);
+	kfree(as102_dev);
+	return ret;
+}
+
+static int as102_open(struct inode *inode, struct file *file)
+{
+	int ret = 0, minor = 0;
+	struct usb_interface *intf = NULL;
+	struct as102_dev_t *dev = NULL;
+
+	ENTER();
+
+	/* read minor from inode */
+	minor = iminor(inode);
+
+	/* fetch device from usb interface */
+	intf = usb_find_interface(&as102_usb_driver, minor);
+	if (intf == NULL) {
+		printk(KERN_ERR "%s: can't find device for minor %d\n",
+				__func__, minor);
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	/* get our device */
+	dev = usb_get_intfdata(intf);
+	if (dev == NULL) {
+		ret = -EFAULT;
+		goto exit;
+	}
+
+	/* save our device object in the file's private structure */
+	file->private_data = dev;
+
+	/* increment our usage count for the device */
+	kref_get(&dev->kref);
+
+exit:
+	LEAVE();
+	return ret;
+}
+
+static int as102_release(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+	struct as102_dev_t *dev = NULL;
+
+	ENTER();
+
+	dev = file->private_data;
+	if (dev != NULL) {
+		/* decrement the count on our device */
+		kref_put(&dev->kref, as102_usb_release);
+	}
+
+	LEAVE();
+	return ret;
+}
+
+MODULE_DEVICE_TABLE(usb, as102_usb_id_table);
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_usb_drv.h b/drivers/staging/media/as102/as102_usb_drv.h
new file mode 100644
index 0000000..fb1fc41
--- /dev/null
+++ b/drivers/staging/media/as102/as102_usb_drv.h
@@ -0,0 +1,59 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/version.h>
+
+#ifndef _AS102_USB_DRV_H_
+#define _AS102_USB_DRV_H_
+
+#define AS102_USB_DEVICE_TX_CTRL_CMD	0xF1
+#define AS102_USB_DEVICE_RX_CTRL_CMD	0xF2
+
+/* define these values to match the supported devices */
+
+/* Abilis system: "TITAN" */
+#define AS102_REFERENCE_DESIGN		"Abilis Systems DVB-Titan"
+#define AS102_USB_DEVICE_VENDOR_ID	0x1BA6
+#define AS102_USB_DEVICE_PID_0001	0x0001
+
+/* PCTV Systems: PCTV picoStick (74e) */
+#define AS102_PCTV_74E			"PCTV Systems picoStick (74e)"
+#define PCTV_74E_USB_VID		0x2013
+#define PCTV_74E_USB_PID		0x0246
+
+/* Elgato: EyeTV DTT Deluxe */
+#define AS102_ELGATO_EYETV_DTT_NAME	"Elgato EyeTV DTT Deluxe"
+#define ELGATO_EYETV_DTT_USB_VID	0x0fd9
+#define ELGATO_EYETV_DTT_USB_PID	0x002c
+
+/* nBox: nBox DVB-T Dongle */
+#define AS102_NBOX_DVBT_DONGLE_NAME	"nBox DVB-T Dongle"
+#define NBOX_DVBT_DONGLE_USB_VID	0x0b89
+#define NBOX_DVBT_DONGLE_USB_PID	0x0007
+
+void as102_urb_stream_irq(struct urb *urb);
+
+struct as10x_usb_token_cmd_t {
+	/* token cmd */
+	struct as10x_cmd_t c;
+	/* token response */
+	struct as10x_cmd_t r;
+};
+#endif
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as10x_cmd.c b/drivers/staging/media/as102/as10x_cmd.c
new file mode 100644
index 0000000..0dcba80
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd.c
@@ -0,0 +1,452 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+/**
+ * as10x_cmd_turn_on - send turn on command to AS10x
+ * @phandle:   pointer to AS10x handle
+ *
+ * Return 0 when no error, < 0 in case of error.
+ */
+int as10x_cmd_turn_on(as10x_handle_t *phandle)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.turn_on.req));
+
+	/* fill command */
+	pcmd->body.turn_on.req.proc_id = cpu_to_le16(CONTROL_PROC_TURNON);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+					       sizeof(pcmd->body.turn_on.req) +
+					       HEADER_SIZE,
+					       (uint8_t *) prsp,
+					       sizeof(prsp->body.turn_on.rsp) +
+					       HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_TURNON_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_turn_off - send turn off command to AS10x
+ * @phandle:   pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_turn_off(as10x_handle_t *phandle)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.turn_off.req));
+
+	/* fill command */
+	pcmd->body.turn_off.req.proc_id = cpu_to_le16(CONTROL_PROC_TURNOFF);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(
+			phandle, (uint8_t *) pcmd,
+			sizeof(pcmd->body.turn_off.req) + HEADER_SIZE,
+			(uint8_t *) prsp,
+			sizeof(prsp->body.turn_off.rsp) + HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_TURNOFF_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_set_tune - send set tune command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @ptune:   tune parameters
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_set_tune(as10x_handle_t *phandle, struct as10x_tune_args *ptune)
+{
+	int error;
+	struct as10x_cmd_t *preq, *prsp;
+
+	ENTER();
+
+	preq = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(preq, (++phandle->cmd_xid),
+			sizeof(preq->body.set_tune.req));
+
+	/* fill command */
+	preq->body.set_tune.req.proc_id = cpu_to_le16(CONTROL_PROC_SETTUNE);
+	preq->body.set_tune.req.args.freq = cpu_to_le32(ptune->freq);
+	preq->body.set_tune.req.args.bandwidth = ptune->bandwidth;
+	preq->body.set_tune.req.args.hier_select = ptune->hier_select;
+	preq->body.set_tune.req.args.constellation = ptune->constellation;
+	preq->body.set_tune.req.args.hierarchy = ptune->hierarchy;
+	preq->body.set_tune.req.args.interleaving_mode  =
+		ptune->interleaving_mode;
+	preq->body.set_tune.req.args.code_rate  = ptune->code_rate;
+	preq->body.set_tune.req.args.guard_interval = ptune->guard_interval;
+	preq->body.set_tune.req.args.transmission_mode  =
+		ptune->transmission_mode;
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle,
+					       (uint8_t *) preq,
+					       sizeof(preq->body.set_tune.req)
+					       + HEADER_SIZE,
+					       (uint8_t *) prsp,
+					       sizeof(prsp->body.set_tune.rsp)
+					       + HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_SETTUNE_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_get_tune_status - send get tune status command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @pstatus: pointer to updated status structure of the current tune
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_tune_status(as10x_handle_t *phandle,
+			      struct as10x_tune_status *pstatus)
+{
+	int error;
+	struct as10x_cmd_t  *preq, *prsp;
+
+	ENTER();
+
+	preq = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(preq, (++phandle->cmd_xid),
+			sizeof(preq->body.get_tune_status.req));
+
+	/* fill command */
+	preq->body.get_tune_status.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_GETTUNESTAT);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(
+			phandle,
+			(uint8_t *) preq,
+			sizeof(preq->body.get_tune_status.req) + HEADER_SIZE,
+			(uint8_t *) prsp,
+			sizeof(prsp->body.get_tune_status.rsp) + HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_GETTUNESTAT_RSP);
+	if (error < 0)
+		goto out;
+
+	/* Response OK -> get response data */
+	pstatus->tune_state = prsp->body.get_tune_status.rsp.sts.tune_state;
+	pstatus->signal_strength  =
+		le16_to_cpu(prsp->body.get_tune_status.rsp.sts.signal_strength);
+	pstatus->PER = le16_to_cpu(prsp->body.get_tune_status.rsp.sts.PER);
+	pstatus->BER = le16_to_cpu(prsp->body.get_tune_status.rsp.sts.BER);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * send get TPS command to AS10x
+ * @phandle:   pointer to AS10x handle
+ * @ptps:      pointer to TPS parameters structure
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_tps(as10x_handle_t *phandle, struct as10x_tps *ptps)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.get_tps.req));
+
+	/* fill command */
+	pcmd->body.get_tune_status.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_GETTPS);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle,
+					       (uint8_t *) pcmd,
+					       sizeof(pcmd->body.get_tps.req) +
+					       HEADER_SIZE,
+					       (uint8_t *) prsp,
+					       sizeof(prsp->body.get_tps.rsp) +
+					       HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_GETTPS_RSP);
+	if (error < 0)
+		goto out;
+
+	/* Response OK -> get response data */
+	ptps->constellation = prsp->body.get_tps.rsp.tps.constellation;
+	ptps->hierarchy = prsp->body.get_tps.rsp.tps.hierarchy;
+	ptps->interleaving_mode = prsp->body.get_tps.rsp.tps.interleaving_mode;
+	ptps->code_rate_HP = prsp->body.get_tps.rsp.tps.code_rate_HP;
+	ptps->code_rate_LP = prsp->body.get_tps.rsp.tps.code_rate_LP;
+	ptps->guard_interval = prsp->body.get_tps.rsp.tps.guard_interval;
+	ptps->transmission_mode  = prsp->body.get_tps.rsp.tps.transmission_mode;
+	ptps->DVBH_mask_HP = prsp->body.get_tps.rsp.tps.DVBH_mask_HP;
+	ptps->DVBH_mask_LP = prsp->body.get_tps.rsp.tps.DVBH_mask_LP;
+	ptps->cell_ID = le16_to_cpu(prsp->body.get_tps.rsp.tps.cell_ID);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_get_demod_stats - send get demod stats command to AS10x
+ * @phandle:       pointer to AS10x handle
+ * @pdemod_stats:  pointer to demod stats parameters structure
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_demod_stats(as10x_handle_t  *phandle,
+			      struct as10x_demod_stats *pdemod_stats)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.get_demod_stats.req));
+
+	/* fill command */
+	pcmd->body.get_demod_stats.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_GET_DEMOD_STATS);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle,
+				(uint8_t *) pcmd,
+				sizeof(pcmd->body.get_demod_stats.req)
+				+ HEADER_SIZE,
+				(uint8_t *) prsp,
+				sizeof(prsp->body.get_demod_stats.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_GET_DEMOD_STATS_RSP);
+	if (error < 0)
+		goto out;
+
+	/* Response OK -> get response data */
+	pdemod_stats->frame_count =
+		le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.frame_count);
+	pdemod_stats->bad_frame_count =
+		le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.bad_frame_count);
+	pdemod_stats->bytes_fixed_by_rs =
+		le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.bytes_fixed_by_rs);
+	pdemod_stats->mer =
+		le16_to_cpu(prsp->body.get_demod_stats.rsp.stats.mer);
+	pdemod_stats->has_started =
+		prsp->body.get_demod_stats.rsp.stats.has_started;
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_get_impulse_resp - send get impulse response command to AS10x
+ * @phandle:  pointer to AS10x handle
+ * @is_ready: pointer to value indicating when impulse
+ *	      response data is ready
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_impulse_resp(as10x_handle_t     *phandle,
+			       uint8_t *is_ready)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.get_impulse_rsp.req));
+
+	/* fill command */
+	pcmd->body.get_impulse_rsp.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_GET_IMPULSE_RESP);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle,
+					(uint8_t *) pcmd,
+					sizeof(pcmd->body.get_impulse_rsp.req)
+					+ HEADER_SIZE,
+					(uint8_t *) prsp,
+					sizeof(prsp->body.get_impulse_rsp.rsp)
+					+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_GET_IMPULSE_RESP_RSP);
+	if (error < 0)
+		goto out;
+
+	/* Response OK -> get response data */
+	*is_ready = prsp->body.get_impulse_rsp.rsp.is_ready;
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_build - build AS10x command header
+ * @pcmd:     pointer to AS10x command buffer
+ * @xid:      sequence id of the command
+ * @cmd_len:  length of the command
+ */
+void as10x_cmd_build(struct as10x_cmd_t *pcmd,
+		     uint16_t xid, uint16_t cmd_len)
+{
+	pcmd->header.req_id = cpu_to_le16(xid);
+	pcmd->header.prog = cpu_to_le16(SERVICE_PROG_ID);
+	pcmd->header.version = cpu_to_le16(SERVICE_PROG_VERSION);
+	pcmd->header.data_len = cpu_to_le16(cmd_len);
+}
+
+/**
+ * as10x_rsp_parse - Parse command response
+ * @prsp:       pointer to AS10x command buffer
+ * @proc_id:    id of the command
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id)
+{
+	int error;
+
+	/* extract command error code */
+	error = prsp->body.common.rsp.error;
+
+	if ((error == 0) &&
+	    (le16_to_cpu(prsp->body.common.rsp.proc_id) == proc_id)) {
+		return 0;
+	}
+
+	return AS10X_CMD_ERROR;
+}
diff --git a/drivers/staging/media/as102/as10x_cmd.h b/drivers/staging/media/as102/as10x_cmd.h
new file mode 100644
index 0000000..01a7163
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd.h
@@ -0,0 +1,540 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _AS10X_CMD_H_
+#define _AS10X_CMD_H_
+
+#ifdef __KERNEL__
+#include <linux/kernel.h>
+#endif
+
+#include "as10x_types.h"
+
+/*********************************/
+/*       MACRO DEFINITIONS       */
+/*********************************/
+#define AS10X_CMD_ERROR -1
+
+#define SERVICE_PROG_ID        0x0002
+#define SERVICE_PROG_VERSION   0x0001
+
+#define HIER_NONE              0x00
+#define HIER_LOW_PRIORITY      0x01
+
+#define HEADER_SIZE (sizeof(struct as10x_cmd_header_t))
+
+/* context request types */
+#define GET_CONTEXT_DATA        1
+#define SET_CONTEXT_DATA        2
+
+/* ODSP suspend modes */
+#define CFG_MODE_ODSP_RESUME  0
+#define CFG_MODE_ODSP_SUSPEND 1
+
+/* Dump memory size */
+#define DUMP_BLOCK_SIZE_MAX   0x20
+
+/*********************************/
+/*     TYPE DEFINITION           */
+/*********************************/
+typedef enum {
+   CONTROL_PROC_TURNON               = 0x0001,
+   CONTROL_PROC_TURNON_RSP           = 0x0100,
+   CONTROL_PROC_SET_REGISTER         = 0x0002,
+   CONTROL_PROC_SET_REGISTER_RSP     = 0x0200,
+   CONTROL_PROC_GET_REGISTER         = 0x0003,
+   CONTROL_PROC_GET_REGISTER_RSP     = 0x0300,
+   CONTROL_PROC_SETTUNE              = 0x000A,
+   CONTROL_PROC_SETTUNE_RSP          = 0x0A00,
+   CONTROL_PROC_GETTUNESTAT          = 0x000B,
+   CONTROL_PROC_GETTUNESTAT_RSP      = 0x0B00,
+   CONTROL_PROC_GETTPS               = 0x000D,
+   CONTROL_PROC_GETTPS_RSP           = 0x0D00,
+   CONTROL_PROC_SETFILTER            = 0x000E,
+   CONTROL_PROC_SETFILTER_RSP        = 0x0E00,
+   CONTROL_PROC_REMOVEFILTER         = 0x000F,
+   CONTROL_PROC_REMOVEFILTER_RSP     = 0x0F00,
+   CONTROL_PROC_GET_IMPULSE_RESP     = 0x0012,
+   CONTROL_PROC_GET_IMPULSE_RESP_RSP = 0x1200,
+   CONTROL_PROC_START_STREAMING      = 0x0013,
+   CONTROL_PROC_START_STREAMING_RSP  = 0x1300,
+   CONTROL_PROC_STOP_STREAMING       = 0x0014,
+   CONTROL_PROC_STOP_STREAMING_RSP   = 0x1400,
+   CONTROL_PROC_GET_DEMOD_STATS      = 0x0015,
+   CONTROL_PROC_GET_DEMOD_STATS_RSP  = 0x1500,
+   CONTROL_PROC_ELNA_CHANGE_MODE     = 0x0016,
+   CONTROL_PROC_ELNA_CHANGE_MODE_RSP = 0x1600,
+   CONTROL_PROC_ODSP_CHANGE_MODE     = 0x0017,
+   CONTROL_PROC_ODSP_CHANGE_MODE_RSP = 0x1700,
+   CONTROL_PROC_AGC_CHANGE_MODE      = 0x0018,
+   CONTROL_PROC_AGC_CHANGE_MODE_RSP  = 0x1800,
+
+   CONTROL_PROC_CONTEXT              = 0x00FC,
+   CONTROL_PROC_CONTEXT_RSP          = 0xFC00,
+   CONTROL_PROC_DUMP_MEMORY          = 0x00FD,
+   CONTROL_PROC_DUMP_MEMORY_RSP      = 0xFD00,
+   CONTROL_PROC_DUMPLOG_MEMORY       = 0x00FE,
+   CONTROL_PROC_DUMPLOG_MEMORY_RSP   = 0xFE00,
+   CONTROL_PROC_TURNOFF              = 0x00FF,
+   CONTROL_PROC_TURNOFF_RSP          = 0xFF00
+} control_proc;
+
+
+#pragma pack(1)
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+   } rsp;
+} TURN_ON;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t err;
+   } rsp;
+} TURN_OFF;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* tune params */
+      struct as10x_tune_args args;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+   } rsp;
+} SET_TUNE;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+      /* tune status */
+      struct as10x_tune_status sts;
+   } rsp;
+} GET_TUNE_STATUS;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+      /* tps details */
+      struct as10x_tps tps;
+   } rsp;
+} GET_TPS;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t  proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+   } rsp;
+} COMMON;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t  proc_id;
+      /* PID to filter */
+      uint16_t  pid;
+      /* stream type (MPE, PSI/SI or PES )*/
+      uint8_t stream_type;
+      /* PID index in filter table */
+      uint8_t idx;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+      /* Filter id */
+      uint8_t filter_id;
+   } rsp;
+} ADD_PID_FILTER;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t  proc_id;
+      /* PID to remove */
+      uint16_t  pid;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* response error */
+      uint8_t error;
+   } rsp;
+} DEL_PID_FILTER;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+   } rsp;
+} START_STREAMING;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+   } rsp;
+} STOP_STREAMING;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+      /* demod stats */
+      struct as10x_demod_stats stats;
+   } rsp;
+} GET_DEMOD_STATS;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+      /* impulse response ready */
+      uint8_t is_ready;
+   } rsp;
+} GET_IMPULSE_RESP;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* value to write (for set context)*/
+      struct as10x_register_value reg_val;
+      /* context tag */
+      uint16_t tag;
+      /* context request type */
+      uint16_t type;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* value read (for get context) */
+      struct as10x_register_value reg_val;
+      /* context request type */
+      uint16_t type;
+      /* error */
+      uint8_t error;
+   } rsp;
+} FW_CONTEXT;
+
+typedef union {
+   /* request */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* register description */
+      struct as10x_register_addr reg_addr;
+      /* register content */
+      struct as10x_register_value reg_val;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+   } rsp;
+} SET_REGISTER;
+
+typedef union {
+   /* request */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* register description */
+      struct as10x_register_addr reg_addr;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+      /* register content */
+      struct as10x_register_value reg_val;
+   } rsp;
+} GET_REGISTER;
+
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* mode */
+      uint8_t mode;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+   } rsp;
+} CFG_CHANGE_MODE;
+
+struct as10x_cmd_header_t {
+   uint16_t req_id;
+   uint16_t prog;
+   uint16_t version;
+   uint16_t data_len;
+};
+
+#define DUMP_BLOCK_SIZE 16
+typedef union {
+   /* request */
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* dump memory type request */
+      uint8_t dump_req;
+      /* register description */
+      struct as10x_register_addr reg_addr;
+      /* nb blocks to read */
+      uint16_t num_blocks;
+   } req;
+   /* response */
+   struct {
+      /* response identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+      /* dump response */
+      uint8_t dump_rsp;
+      /* data */
+      union {
+	 uint8_t  data8[DUMP_BLOCK_SIZE];
+	 uint16_t data16[DUMP_BLOCK_SIZE / sizeof(uint16_t)];
+	 uint32_t data32[DUMP_BLOCK_SIZE / sizeof(uint32_t)];
+      } u;
+   } rsp;
+} DUMP_MEMORY;
+
+typedef union {
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* dump memory type request */
+      uint8_t dump_req;
+   } req;
+   struct {
+      /* request identifier */
+      uint16_t proc_id;
+      /* error */
+      uint8_t error;
+      /* dump response */
+      uint8_t dump_rsp;
+      /* dump data */
+      uint8_t data[DUMP_BLOCK_SIZE];
+   } rsp;
+} DUMPLOG_MEMORY;
+
+typedef union {
+   /* request */
+   struct {
+      uint16_t proc_id;
+      uint8_t data[64 - sizeof(struct as10x_cmd_header_t) -2 /* proc_id */];
+   } req;
+   /* response */
+   struct {
+      uint16_t proc_id;
+      uint8_t error;
+      uint8_t data[64 - sizeof(struct as10x_cmd_header_t) /* header */
+		      - 2 /* proc_id */ - 1 /* rc */];
+   } rsp;
+} RAW_DATA;
+
+struct as10x_cmd_t {
+   /* header */
+   struct as10x_cmd_header_t header;
+   /* body */
+   union {
+      TURN_ON           turn_on;
+      TURN_OFF          turn_off;
+      SET_TUNE          set_tune;
+      GET_TUNE_STATUS   get_tune_status;
+      GET_TPS           get_tps;
+      COMMON            common;
+      ADD_PID_FILTER    add_pid_filter;
+      DEL_PID_FILTER    del_pid_filter;
+      START_STREAMING   start_streaming;
+      STOP_STREAMING    stop_streaming;
+      GET_DEMOD_STATS   get_demod_stats;
+      GET_IMPULSE_RESP  get_impulse_rsp;
+      FW_CONTEXT        context;
+      SET_REGISTER      set_register;
+      GET_REGISTER      get_register;
+      CFG_CHANGE_MODE   cfg_change_mode;
+      DUMP_MEMORY       dump_memory;
+      DUMPLOG_MEMORY    dumplog_memory;
+      RAW_DATA          raw_data;
+   } body;
+};
+
+struct as10x_token_cmd_t {
+   /* token cmd */
+   struct as10x_cmd_t c;
+   /* token response */
+   struct as10x_cmd_t r;
+};
+#pragma pack()
+
+
+/**************************/
+/* FUNCTION DECLARATION   */
+/**************************/
+
+void as10x_cmd_build(struct as10x_cmd_t *pcmd, uint16_t proc_id,
+		      uint16_t cmd_len);
+int as10x_rsp_parse(struct as10x_cmd_t *r, uint16_t proc_id);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* as10x cmd */
+int as10x_cmd_turn_on(as10x_handle_t *phandle);
+int as10x_cmd_turn_off(as10x_handle_t *phandle);
+
+int as10x_cmd_set_tune(as10x_handle_t *phandle,
+		       struct as10x_tune_args *ptune);
+
+int as10x_cmd_get_tune_status(as10x_handle_t *phandle,
+			      struct as10x_tune_status *pstatus);
+
+int as10x_cmd_get_tps(as10x_handle_t *phandle,
+		      struct as10x_tps *ptps);
+
+int as10x_cmd_get_demod_stats(as10x_handle_t  *phandle,
+			      struct as10x_demod_stats *pdemod_stats);
+
+int as10x_cmd_get_impulse_resp(as10x_handle_t *phandle,
+			       uint8_t *is_ready);
+
+/* as10x cmd stream */
+int as10x_cmd_add_PID_filter(as10x_handle_t *phandle,
+			     struct as10x_ts_filter *filter);
+int as10x_cmd_del_PID_filter(as10x_handle_t *phandle,
+			     uint16_t pid_value);
+
+int as10x_cmd_start_streaming(as10x_handle_t *phandle);
+int as10x_cmd_stop_streaming(as10x_handle_t *phandle);
+
+/* as10x cmd cfg */
+int as10x_cmd_set_context(as10x_handle_t *phandle,
+			  uint16_t tag,
+			  uint32_t value);
+int as10x_cmd_get_context(as10x_handle_t *phandle,
+			  uint16_t tag,
+			  uint32_t *pvalue);
+
+int as10x_cmd_eLNA_change_mode(as10x_handle_t *phandle, uint8_t mode);
+int as10x_context_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id);
+#ifdef __cplusplus
+}
+#endif
+#endif
+/* EOF - vim: set textwidth=80 ts=3 sw=3 sts=3 et: */
diff --git a/drivers/staging/media/as102/as10x_cmd_cfg.c b/drivers/staging/media/as102/as10x_cmd_cfg.c
new file mode 100644
index 0000000..ec6f69f
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd_cfg.c
@@ -0,0 +1,215 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+/***************************/
+/* FUNCTION DEFINITION     */
+/***************************/
+
+/**
+ * as10x_cmd_get_context - Send get context command to AS10x
+ * @phandle:   pointer to AS10x handle
+ * @tag:       context tag
+ * @pvalue:    pointer where to store context value read
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_context(as10x_handle_t *phandle, uint16_t tag,
+			  uint32_t *pvalue)
+{
+	int  error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.context.req));
+
+	/* fill command */
+	pcmd->body.context.req.proc_id = cpu_to_le16(CONTROL_PROC_CONTEXT);
+	pcmd->body.context.req.tag = cpu_to_le16(tag);
+	pcmd->body.context.req.type = cpu_to_le16(GET_CONTEXT_DATA);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error  = phandle->ops->xfer_cmd(phandle,
+						(uint8_t *) pcmd,
+						sizeof(pcmd->body.context.req)
+						+ HEADER_SIZE,
+						(uint8_t *) prsp,
+						sizeof(prsp->body.context.rsp)
+						+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response: context command do not follow the common response */
+	/* structure -> specific handling response parse required            */
+	error = as10x_context_rsp_parse(prsp, CONTROL_PROC_CONTEXT_RSP);
+
+	if (error == 0) {
+		/* Response OK -> get response data */
+		*pvalue = le32_to_cpu(prsp->body.context.rsp.reg_val.u.value32);
+		/* value returned is always a 32-bit value */
+	}
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_set_context - send set context command to AS10x
+ * @phandle:   pointer to AS10x handle
+ * @tag:       context tag
+ * @value:     value to set in context
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_set_context(as10x_handle_t *phandle, uint16_t tag,
+			  uint32_t value)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.context.req));
+
+	/* fill command */
+	pcmd->body.context.req.proc_id = cpu_to_le16(CONTROL_PROC_CONTEXT);
+	/* pcmd->body.context.req.reg_val.mode initialization is not required */
+	pcmd->body.context.req.reg_val.u.value32 = cpu_to_le32(value);
+	pcmd->body.context.req.tag = cpu_to_le16(tag);
+	pcmd->body.context.req.type = cpu_to_le16(SET_CONTEXT_DATA);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error  = phandle->ops->xfer_cmd(phandle,
+						(uint8_t *) pcmd,
+						sizeof(pcmd->body.context.req)
+						+ HEADER_SIZE,
+						(uint8_t *) prsp,
+						sizeof(prsp->body.context.rsp)
+						+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response: context command do not follow the common response */
+	/* structure -> specific handling response parse required            */
+	error = as10x_context_rsp_parse(prsp, CONTROL_PROC_CONTEXT_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_eLNA_change_mode - send eLNA change mode command to AS10x
+ * @phandle:   pointer to AS10x handle
+ * @mode:      mode selected:
+ *	        - ON    : 0x0 => eLNA always ON
+ *	        - OFF   : 0x1 => eLNA always OFF
+ *	        - AUTO  : 0x2 => eLNA follow hysteresis parameters
+ *				 to be ON or OFF
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_eLNA_change_mode(as10x_handle_t *phandle, uint8_t mode)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.cfg_change_mode.req));
+
+	/* fill command */
+	pcmd->body.cfg_change_mode.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_ELNA_CHANGE_MODE);
+	pcmd->body.cfg_change_mode.req.mode = mode;
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error  = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+				sizeof(pcmd->body.cfg_change_mode.req)
+				+ HEADER_SIZE, (uint8_t *) prsp,
+				sizeof(prsp->body.cfg_change_mode.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_ELNA_CHANGE_MODE_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_context_rsp_parse - Parse context command response
+ * @prsp:       pointer to AS10x command response buffer
+ * @proc_id:    id of the command
+ *
+ * Since the contex command reponse does not follow the common
+ * response, a specific parse function is required.
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_context_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id)
+{
+	int err;
+
+	err = prsp->body.context.rsp.error;
+
+	if ((err == 0) &&
+	    (le16_to_cpu(prsp->body.context.rsp.proc_id) == proc_id)) {
+		return 0;
+	}
+	return AS10X_CMD_ERROR;
+}
diff --git a/drivers/staging/media/as102/as10x_cmd_stream.c b/drivers/staging/media/as102/as10x_cmd_stream.c
new file mode 100644
index 0000000..045c706
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd_stream.c
@@ -0,0 +1,223 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_cmd.h"
+
+/**
+ * as10x_cmd_add_PID_filter - send add filter command to AS10x
+ * @phandle:   pointer to AS10x handle
+ * @filter:    TSFilter filter for DVB-T
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_add_PID_filter(as10x_handle_t *phandle,
+			     struct as10x_ts_filter *filter)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.add_pid_filter.req));
+
+	/* fill command */
+	pcmd->body.add_pid_filter.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_SETFILTER);
+	pcmd->body.add_pid_filter.req.pid = cpu_to_le16(filter->pid);
+	pcmd->body.add_pid_filter.req.stream_type = filter->type;
+
+	if (filter->idx < 16)
+		pcmd->body.add_pid_filter.req.idx = filter->idx;
+	else
+		pcmd->body.add_pid_filter.req.idx = 0xFF;
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+				sizeof(pcmd->body.add_pid_filter.req)
+				+ HEADER_SIZE, (uint8_t *) prsp,
+				sizeof(prsp->body.add_pid_filter.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_SETFILTER_RSP);
+
+	if (error == 0) {
+		/* Response OK -> get response data */
+		filter->idx = prsp->body.add_pid_filter.rsp.filter_id;
+	}
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_del_PID_filter - Send delete filter command to AS10x
+ * @phandle:      pointer to AS10x handle
+ * @pid_value:    PID to delete
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_del_PID_filter(as10x_handle_t *phandle,
+			     uint16_t pid_value)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.del_pid_filter.req));
+
+	/* fill command */
+	pcmd->body.del_pid_filter.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_REMOVEFILTER);
+	pcmd->body.del_pid_filter.req.pid = cpu_to_le16(pid_value);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+				sizeof(pcmd->body.del_pid_filter.req)
+				+ HEADER_SIZE, (uint8_t *) prsp,
+				sizeof(prsp->body.del_pid_filter.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_REMOVEFILTER_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_start_streaming - Send start streaming command to AS10x
+ * @phandle:   pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_start_streaming(as10x_handle_t *phandle)
+{
+	int error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.start_streaming.req));
+
+	/* fill command */
+	pcmd->body.start_streaming.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_START_STREAMING);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+				sizeof(pcmd->body.start_streaming.req)
+				+ HEADER_SIZE, (uint8_t *) prsp,
+				sizeof(prsp->body.start_streaming.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_START_STREAMING_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
+
+/**
+ * as10x_cmd_stop_streaming - Send stop streaming command to AS10x
+ * @phandle:   pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_stop_streaming(as10x_handle_t *phandle)
+{
+	int8_t error;
+	struct as10x_cmd_t *pcmd, *prsp;
+
+	ENTER();
+
+	pcmd = phandle->cmd;
+	prsp = phandle->rsp;
+
+	/* prepare command */
+	as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+			sizeof(pcmd->body.stop_streaming.req));
+
+	/* fill command */
+	pcmd->body.stop_streaming.req.proc_id =
+		cpu_to_le16(CONTROL_PROC_STOP_STREAMING);
+
+	/* send command */
+	if (phandle->ops->xfer_cmd) {
+		error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+				sizeof(pcmd->body.stop_streaming.req)
+				+ HEADER_SIZE, (uint8_t *) prsp,
+				sizeof(prsp->body.stop_streaming.rsp)
+				+ HEADER_SIZE);
+	} else {
+		error = AS10X_CMD_ERROR;
+	}
+
+	if (error < 0)
+		goto out;
+
+	/* parse response */
+	error = as10x_rsp_parse(prsp, CONTROL_PROC_STOP_STREAMING_RSP);
+
+out:
+	LEAVE();
+	return error;
+}
diff --git a/drivers/staging/media/as102/as10x_handle.h b/drivers/staging/media/as102/as10x_handle.h
new file mode 100644
index 0000000..4f01a76
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_handle.h
@@ -0,0 +1,58 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifdef __KERNEL__
+struct as102_bus_adapter_t;
+struct as102_dev_t;
+
+#define as10x_handle_t struct as102_bus_adapter_t
+#include "as10x_cmd.h"
+
+/* values for "mode" field */
+#define REGMODE8         8
+#define REGMODE16        16
+#define REGMODE32        32
+
+struct as102_priv_ops_t {
+	int (*upload_fw_pkt) (struct as102_bus_adapter_t *bus_adap,
+			      unsigned char *buf, int buflen, int swap32);
+
+	int (*send_cmd) (struct as102_bus_adapter_t *bus_adap,
+			 unsigned char *buf, int buflen);
+
+	int (*xfer_cmd) (struct as102_bus_adapter_t *bus_adap,
+			 unsigned char *send_buf, int send_buf_len,
+			 unsigned char *recv_buf, int recv_buf_len);
+/*
+	int (*pid_filter) (struct as102_bus_adapter_t *bus_adap,
+			   int index, u16 pid, int onoff);
+*/
+	int (*start_stream) (struct as102_dev_t *dev);
+	void (*stop_stream) (struct as102_dev_t *dev);
+
+	int (*reset_target) (struct as102_bus_adapter_t *bus_adap);
+
+	int (*read_write)(struct as102_bus_adapter_t *bus_adap, uint8_t mode,
+			  uint32_t rd_addr, uint16_t rd_len,
+			  uint32_t wr_addr, uint16_t wr_len);
+
+	int (*as102_read_ep2) (struct as102_bus_adapter_t *bus_adap,
+			       unsigned char *recv_buf,
+			       int recv_buf_len);
+};
+#endif
diff --git a/drivers/staging/media/as102/as10x_types.h b/drivers/staging/media/as102/as10x_types.h
new file mode 100644
index 0000000..3dedb3c
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_types.h
@@ -0,0 +1,198 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _AS10X_TYPES_H_
+#define _AS10X_TYPES_H_
+
+#include "as10x_handle.h"
+
+/*********************************/
+/*       MACRO DEFINITIONS       */
+/*********************************/
+
+/* bandwidth constant values */
+#define BW_5_MHZ           0x00
+#define BW_6_MHZ           0x01
+#define BW_7_MHZ           0x02
+#define BW_8_MHZ           0x03
+
+/* hierarchy priority selection values */
+#define HIER_NO_PRIORITY   0x00
+#define HIER_LOW_PRIORITY  0x01
+#define HIER_HIGH_PRIORITY 0x02
+
+/* constellation available values */
+#define CONST_QPSK         0x00
+#define CONST_QAM16        0x01
+#define CONST_QAM64        0x02
+#define CONST_UNKNOWN      0xFF
+
+/* hierarchy available values */
+#define HIER_NONE         0x00
+#define HIER_ALPHA_1      0x01
+#define HIER_ALPHA_2      0x02
+#define HIER_ALPHA_4      0x03
+#define HIER_UNKNOWN      0xFF
+
+/* interleaving available values */
+#define INTLV_NATIVE      0x00
+#define INTLV_IN_DEPTH    0x01
+#define INTLV_UNKNOWN     0xFF
+
+/* code rate available values */
+#define CODE_RATE_1_2     0x00
+#define CODE_RATE_2_3     0x01
+#define CODE_RATE_3_4     0x02
+#define CODE_RATE_5_6     0x03
+#define CODE_RATE_7_8     0x04
+#define CODE_RATE_UNKNOWN 0xFF
+
+/* guard interval available values */
+#define GUARD_INT_1_32    0x00
+#define GUARD_INT_1_16    0x01
+#define GUARD_INT_1_8     0x02
+#define GUARD_INT_1_4     0x03
+#define GUARD_UNKNOWN     0xFF
+
+/* transmission mode available values */
+#define TRANS_MODE_2K      0x00
+#define TRANS_MODE_8K      0x01
+#define TRANS_MODE_4K      0x02
+#define TRANS_MODE_UNKNOWN 0xFF
+
+/* DVBH signalling available values */
+#define TIMESLICING_PRESENT   0x01
+#define MPE_FEC_PRESENT       0x02
+
+/* tune state available */
+#define TUNE_STATUS_NOT_TUNED       0x00
+#define TUNE_STATUS_IDLE            0x01
+#define TUNE_STATUS_LOCKING         0x02
+#define TUNE_STATUS_SIGNAL_DVB_OK   0x03
+#define TUNE_STATUS_STREAM_DETECTED 0x04
+#define TUNE_STATUS_STREAM_TUNED    0x05
+#define TUNE_STATUS_ERROR           0xFF
+
+/* available TS FID filter types */
+#define TS_PID_TYPE_TS       0
+#define TS_PID_TYPE_PSI_SI   1
+#define TS_PID_TYPE_MPE      2
+
+/* number of echos available */
+#define MAX_ECHOS   15
+
+/* Context types */
+#define CONTEXT_LNA                   1010
+#define CONTEXT_ELNA_HYSTERESIS       4003
+#define CONTEXT_ELNA_GAIN             4004
+#define CONTEXT_MER_THRESHOLD         5005
+#define CONTEXT_MER_OFFSET            5006
+#define CONTEXT_IR_STATE              7000
+#define CONTEXT_TSOUT_MSB_FIRST       7004
+#define CONTEXT_TSOUT_FALLING_EDGE    7005
+
+/* Configuration modes */
+#define CFG_MODE_ON     0
+#define CFG_MODE_OFF    1
+#define CFG_MODE_AUTO   2
+
+#pragma pack(1)
+struct as10x_tps {
+   uint8_t constellation;
+   uint8_t hierarchy;
+   uint8_t interleaving_mode;
+   uint8_t code_rate_HP;
+   uint8_t code_rate_LP;
+   uint8_t guard_interval;
+   uint8_t transmission_mode;
+   uint8_t DVBH_mask_HP;
+   uint8_t DVBH_mask_LP;
+   uint16_t cell_ID;
+};
+
+struct as10x_tune_args {
+   /* frequency */
+   uint32_t freq;
+   /* bandwidth */
+   uint8_t bandwidth;
+   /* hierarchy selection */
+   uint8_t hier_select;
+   /* constellation */
+   uint8_t constellation;
+   /* hierarchy */
+   uint8_t hierarchy;
+   /* interleaving mode */
+   uint8_t interleaving_mode;
+   /* code rate */
+   uint8_t code_rate;
+   /* guard interval */
+   uint8_t guard_interval;
+   /* transmission mode */
+   uint8_t transmission_mode;
+};
+
+struct as10x_tune_status {
+   /* tune status */
+   uint8_t tune_state;
+   /* signal strength */
+   int16_t signal_strength;
+   /* packet error rate 10^-4 */
+   uint16_t PER;
+   /* bit error rate 10^-4 */
+   uint16_t BER;
+};
+
+struct as10x_demod_stats {
+   /* frame counter */
+   uint32_t frame_count;
+   /* Bad frame counter */
+   uint32_t bad_frame_count;
+   /* Number of wrong bytes fixed by Reed-Solomon */
+   uint32_t bytes_fixed_by_rs;
+   /* Averaged MER */
+   uint16_t mer;
+   /* statistics calculation state indicator (started or not) */
+   uint8_t has_started;
+};
+
+struct as10x_ts_filter {
+   uint16_t pid;  /** valid PID value 0x00 : 0x2000 */
+   uint8_t  type; /** Red TS_PID_TYPE_<N> values */
+   uint8_t  idx;  /** index in filtering table */
+};
+
+struct as10x_register_value {
+   uint8_t       mode;
+   union {
+      uint8_t    value8;    /* 8 bit value */
+      uint16_t   value16;   /* 16 bit value */
+      uint32_t   value32;   /* 32 bit value */
+   }u;
+};
+
+#pragma pack()
+
+struct as10x_register_addr {
+   /* register addr */
+   uint32_t addr;
+   /* register mode access */
+   uint8_t mode;
+};
+
+
+#endif
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/media/cxd2099/Kconfig
similarity index 100%
rename from drivers/staging/cxd2099/Kconfig
rename to drivers/staging/media/cxd2099/Kconfig
diff --git a/drivers/staging/cxd2099/Makefile b/drivers/staging/media/cxd2099/Makefile
similarity index 100%
rename from drivers/staging/cxd2099/Makefile
rename to drivers/staging/media/cxd2099/Makefile
diff --git a/drivers/staging/cxd2099/TODO b/drivers/staging/media/cxd2099/TODO
similarity index 100%
rename from drivers/staging/cxd2099/TODO
rename to drivers/staging/media/cxd2099/TODO
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/media/cxd2099/cxd2099.c
similarity index 100%
rename from drivers/staging/cxd2099/cxd2099.c
rename to drivers/staging/media/cxd2099/cxd2099.c
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/media/cxd2099/cxd2099.h
similarity index 100%
rename from drivers/staging/cxd2099/cxd2099.h
rename to drivers/staging/media/cxd2099/cxd2099.h
diff --git a/drivers/staging/dt3155v4l/Kconfig b/drivers/staging/media/dt3155v4l/Kconfig
similarity index 100%
rename from drivers/staging/dt3155v4l/Kconfig
rename to drivers/staging/media/dt3155v4l/Kconfig
diff --git a/drivers/staging/dt3155v4l/Makefile b/drivers/staging/media/dt3155v4l/Makefile
similarity index 100%
rename from drivers/staging/dt3155v4l/Makefile
rename to drivers/staging/media/dt3155v4l/Makefile
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/media/dt3155v4l/dt3155v4l.c
similarity index 100%
rename from drivers/staging/dt3155v4l/dt3155v4l.c
rename to drivers/staging/media/dt3155v4l/dt3155v4l.c
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.h b/drivers/staging/media/dt3155v4l/dt3155v4l.h
similarity index 100%
rename from drivers/staging/dt3155v4l/dt3155v4l.h
rename to drivers/staging/media/dt3155v4l/dt3155v4l.h
diff --git a/drivers/staging/easycap/Kconfig b/drivers/staging/media/easycap/Kconfig
similarity index 100%
rename from drivers/staging/easycap/Kconfig
rename to drivers/staging/media/easycap/Kconfig
diff --git a/drivers/staging/easycap/Makefile b/drivers/staging/media/easycap/Makefile
similarity index 100%
rename from drivers/staging/easycap/Makefile
rename to drivers/staging/media/easycap/Makefile
diff --git a/drivers/staging/easycap/README b/drivers/staging/media/easycap/README
similarity index 100%
rename from drivers/staging/easycap/README
rename to drivers/staging/media/easycap/README
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/media/easycap/easycap.h
similarity index 100%
rename from drivers/staging/easycap/easycap.h
rename to drivers/staging/media/easycap/easycap.h
diff --git a/drivers/staging/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c
similarity index 100%
rename from drivers/staging/easycap/easycap_ioctl.c
rename to drivers/staging/media/easycap/easycap_ioctl.c
diff --git a/drivers/staging/easycap/easycap_low.c b/drivers/staging/media/easycap/easycap_low.c
similarity index 100%
rename from drivers/staging/easycap/easycap_low.c
rename to drivers/staging/media/easycap/easycap_low.c
diff --git a/drivers/staging/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c
similarity index 100%
rename from drivers/staging/easycap/easycap_main.c
rename to drivers/staging/media/easycap/easycap_main.c
diff --git a/drivers/staging/easycap/easycap_settings.c b/drivers/staging/media/easycap/easycap_settings.c
similarity index 100%
rename from drivers/staging/easycap/easycap_settings.c
rename to drivers/staging/media/easycap/easycap_settings.c
diff --git a/drivers/staging/easycap/easycap_sound.c b/drivers/staging/media/easycap/easycap_sound.c
similarity index 100%
rename from drivers/staging/easycap/easycap_sound.c
rename to drivers/staging/media/easycap/easycap_sound.c
diff --git a/drivers/staging/easycap/easycap_testcard.c b/drivers/staging/media/easycap/easycap_testcard.c
similarity index 100%
rename from drivers/staging/easycap/easycap_testcard.c
rename to drivers/staging/media/easycap/easycap_testcard.c
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
similarity index 100%
rename from drivers/staging/go7007/Kconfig
rename to drivers/staging/media/go7007/Kconfig
diff --git a/drivers/staging/go7007/Makefile b/drivers/staging/media/go7007/Makefile
similarity index 100%
rename from drivers/staging/go7007/Makefile
rename to drivers/staging/media/go7007/Makefile
diff --git a/drivers/staging/go7007/README b/drivers/staging/media/go7007/README
similarity index 100%
rename from drivers/staging/go7007/README
rename to drivers/staging/media/go7007/README
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c
similarity index 100%
rename from drivers/staging/go7007/go7007-driver.c
rename to drivers/staging/media/go7007/go7007-driver.c
diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/media/go7007/go7007-fw.c
similarity index 100%
rename from drivers/staging/go7007/go7007-fw.c
rename to drivers/staging/media/go7007/go7007-fw.c
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/media/go7007/go7007-i2c.c
similarity index 100%
rename from drivers/staging/go7007/go7007-i2c.c
rename to drivers/staging/media/go7007/go7007-i2c.c
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/media/go7007/go7007-priv.h
similarity index 100%
rename from drivers/staging/go7007/go7007-priv.h
rename to drivers/staging/media/go7007/go7007-priv.h
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
similarity index 100%
rename from drivers/staging/go7007/go7007-usb.c
rename to drivers/staging/media/go7007/go7007-usb.c
diff --git a/drivers/staging/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c
similarity index 100%
rename from drivers/staging/go7007/go7007-v4l2.c
rename to drivers/staging/media/go7007/go7007-v4l2.c
diff --git a/drivers/staging/go7007/go7007.h b/drivers/staging/media/go7007/go7007.h
similarity index 100%
rename from drivers/staging/go7007/go7007.h
rename to drivers/staging/media/go7007/go7007.h
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt
similarity index 100%
rename from drivers/staging/go7007/go7007.txt
rename to drivers/staging/media/go7007/go7007.txt
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/media/go7007/s2250-board.c
similarity index 100%
rename from drivers/staging/go7007/s2250-board.c
rename to drivers/staging/media/go7007/s2250-board.c
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/media/go7007/s2250-loader.c
similarity index 100%
rename from drivers/staging/go7007/s2250-loader.c
rename to drivers/staging/media/go7007/s2250-loader.c
diff --git a/drivers/staging/go7007/s2250-loader.h b/drivers/staging/media/go7007/s2250-loader.h
similarity index 100%
rename from drivers/staging/go7007/s2250-loader.h
rename to drivers/staging/media/go7007/s2250-loader.h
diff --git a/drivers/staging/go7007/saa7134-go7007.c b/drivers/staging/media/go7007/saa7134-go7007.c
similarity index 100%
rename from drivers/staging/go7007/saa7134-go7007.c
rename to drivers/staging/media/go7007/saa7134-go7007.c
diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c
similarity index 100%
rename from drivers/staging/go7007/snd-go7007.c
rename to drivers/staging/media/go7007/snd-go7007.c
diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/media/go7007/wis-i2c.h
similarity index 100%
rename from drivers/staging/go7007/wis-i2c.h
rename to drivers/staging/media/go7007/wis-i2c.h
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/media/go7007/wis-ov7640.c
similarity index 100%
rename from drivers/staging/go7007/wis-ov7640.c
rename to drivers/staging/media/go7007/wis-ov7640.c
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/media/go7007/wis-saa7113.c
similarity index 100%
rename from drivers/staging/go7007/wis-saa7113.c
rename to drivers/staging/media/go7007/wis-saa7113.c
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/media/go7007/wis-saa7115.c
similarity index 100%
rename from drivers/staging/go7007/wis-saa7115.c
rename to drivers/staging/media/go7007/wis-saa7115.c
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/media/go7007/wis-sony-tuner.c
similarity index 100%
rename from drivers/staging/go7007/wis-sony-tuner.c
rename to drivers/staging/media/go7007/wis-sony-tuner.c
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/media/go7007/wis-tw2804.c
similarity index 100%
rename from drivers/staging/go7007/wis-tw2804.c
rename to drivers/staging/media/go7007/wis-tw2804.c
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/media/go7007/wis-tw9903.c
similarity index 100%
rename from drivers/staging/go7007/wis-tw9903.c
rename to drivers/staging/media/go7007/wis-tw9903.c
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/media/go7007/wis-uda1342.c
similarity index 100%
rename from drivers/staging/go7007/wis-uda1342.c
rename to drivers/staging/media/go7007/wis-uda1342.c
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig
similarity index 100%
rename from drivers/staging/lirc/Kconfig
rename to drivers/staging/media/lirc/Kconfig
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/media/lirc/Makefile
similarity index 100%
rename from drivers/staging/lirc/Makefile
rename to drivers/staging/media/lirc/Makefile
diff --git a/drivers/staging/lirc/TODO b/drivers/staging/media/lirc/TODO
similarity index 100%
rename from drivers/staging/lirc/TODO
rename to drivers/staging/media/lirc/TODO
diff --git a/drivers/staging/lirc/TODO.lirc_zilog b/drivers/staging/media/lirc/TODO.lirc_zilog
similarity index 100%
rename from drivers/staging/lirc/TODO.lirc_zilog
rename to drivers/staging/media/lirc/TODO.lirc_zilog
diff --git a/drivers/staging/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c
similarity index 100%
rename from drivers/staging/lirc/lirc_bt829.c
rename to drivers/staging/media/lirc/lirc_bt829.c
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/media/lirc/lirc_ene0100.h
similarity index 100%
rename from drivers/staging/lirc/lirc_ene0100.h
rename to drivers/staging/media/lirc/lirc_ene0100.h
diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c
similarity index 100%
rename from drivers/staging/lirc/lirc_igorplugusb.c
rename to drivers/staging/media/lirc/lirc_igorplugusb.c
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
similarity index 100%
rename from drivers/staging/lirc/lirc_imon.c
rename to drivers/staging/media/lirc/lirc_imon.c
diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c
similarity index 100%
rename from drivers/staging/lirc/lirc_parallel.c
rename to drivers/staging/media/lirc/lirc_parallel.c
diff --git a/drivers/staging/lirc/lirc_parallel.h b/drivers/staging/media/lirc/lirc_parallel.h
similarity index 100%
rename from drivers/staging/lirc/lirc_parallel.h
rename to drivers/staging/media/lirc/lirc_parallel.h
diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c
similarity index 100%
rename from drivers/staging/lirc/lirc_sasem.c
rename to drivers/staging/media/lirc/lirc_sasem.c
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
similarity index 100%
rename from drivers/staging/lirc/lirc_serial.c
rename to drivers/staging/media/lirc/lirc_serial.c
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
similarity index 100%
rename from drivers/staging/lirc/lirc_sir.c
rename to drivers/staging/media/lirc/lirc_sir.c
diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c
similarity index 100%
rename from drivers/staging/lirc/lirc_ttusbir.c
rename to drivers/staging/media/lirc/lirc_ttusbir.c
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c
similarity index 100%
rename from drivers/staging/lirc/lirc_zilog.c
rename to drivers/staging/media/lirc/lirc_zilog.c
diff --git a/drivers/staging/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig
similarity index 100%
rename from drivers/staging/solo6x10/Kconfig
rename to drivers/staging/media/solo6x10/Kconfig
diff --git a/drivers/staging/solo6x10/Makefile b/drivers/staging/media/solo6x10/Makefile
similarity index 100%
rename from drivers/staging/solo6x10/Makefile
rename to drivers/staging/media/solo6x10/Makefile
diff --git a/drivers/staging/solo6x10/TODO b/drivers/staging/media/solo6x10/TODO
similarity index 100%
rename from drivers/staging/solo6x10/TODO
rename to drivers/staging/media/solo6x10/TODO
diff --git a/drivers/staging/solo6x10/core.c b/drivers/staging/media/solo6x10/core.c
similarity index 100%
rename from drivers/staging/solo6x10/core.c
rename to drivers/staging/media/solo6x10/core.c
diff --git a/drivers/staging/solo6x10/disp.c b/drivers/staging/media/solo6x10/disp.c
similarity index 100%
rename from drivers/staging/solo6x10/disp.c
rename to drivers/staging/media/solo6x10/disp.c
diff --git a/drivers/staging/solo6x10/enc.c b/drivers/staging/media/solo6x10/enc.c
similarity index 100%
rename from drivers/staging/solo6x10/enc.c
rename to drivers/staging/media/solo6x10/enc.c
diff --git a/drivers/staging/solo6x10/g723.c b/drivers/staging/media/solo6x10/g723.c
similarity index 99%
rename from drivers/staging/solo6x10/g723.c
rename to drivers/staging/media/solo6x10/g723.c
index 59274bf..2cd0de2 100644
--- a/drivers/staging/solo6x10/g723.c
+++ b/drivers/staging/media/solo6x10/g723.c
@@ -23,6 +23,7 @@
 #include <linux/kthread.h>
 #include <linux/slab.h>
 #include <linux/freezer.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/drivers/staging/solo6x10/gpio.c b/drivers/staging/media/solo6x10/gpio.c
similarity index 100%
rename from drivers/staging/solo6x10/gpio.c
rename to drivers/staging/media/solo6x10/gpio.c
diff --git a/drivers/staging/solo6x10/i2c.c b/drivers/staging/media/solo6x10/i2c.c
similarity index 100%
rename from drivers/staging/solo6x10/i2c.c
rename to drivers/staging/media/solo6x10/i2c.c
diff --git a/drivers/staging/solo6x10/jpeg.h b/drivers/staging/media/solo6x10/jpeg.h
similarity index 100%
rename from drivers/staging/solo6x10/jpeg.h
rename to drivers/staging/media/solo6x10/jpeg.h
diff --git a/drivers/staging/solo6x10/offsets.h b/drivers/staging/media/solo6x10/offsets.h
similarity index 100%
rename from drivers/staging/solo6x10/offsets.h
rename to drivers/staging/media/solo6x10/offsets.h
diff --git a/drivers/staging/solo6x10/osd-font.h b/drivers/staging/media/solo6x10/osd-font.h
similarity index 100%
rename from drivers/staging/solo6x10/osd-font.h
rename to drivers/staging/media/solo6x10/osd-font.h
diff --git a/drivers/staging/solo6x10/p2m.c b/drivers/staging/media/solo6x10/p2m.c
similarity index 100%
rename from drivers/staging/solo6x10/p2m.c
rename to drivers/staging/media/solo6x10/p2m.c
diff --git a/drivers/staging/solo6x10/registers.h b/drivers/staging/media/solo6x10/registers.h
similarity index 100%
rename from drivers/staging/solo6x10/registers.h
rename to drivers/staging/media/solo6x10/registers.h
diff --git a/drivers/staging/solo6x10/solo6x10.h b/drivers/staging/media/solo6x10/solo6x10.h
similarity index 100%
rename from drivers/staging/solo6x10/solo6x10.h
rename to drivers/staging/media/solo6x10/solo6x10.h
diff --git a/drivers/staging/solo6x10/tw28.c b/drivers/staging/media/solo6x10/tw28.c
similarity index 100%
rename from drivers/staging/solo6x10/tw28.c
rename to drivers/staging/media/solo6x10/tw28.c
diff --git a/drivers/staging/solo6x10/tw28.h b/drivers/staging/media/solo6x10/tw28.h
similarity index 100%
rename from drivers/staging/solo6x10/tw28.h
rename to drivers/staging/media/solo6x10/tw28.h
diff --git a/drivers/staging/solo6x10/v4l2-enc.c b/drivers/staging/media/solo6x10/v4l2-enc.c
similarity index 100%
rename from drivers/staging/solo6x10/v4l2-enc.c
rename to drivers/staging/media/solo6x10/v4l2-enc.c
diff --git a/drivers/staging/solo6x10/v4l2.c b/drivers/staging/media/solo6x10/v4l2.c
similarity index 100%
rename from drivers/staging/solo6x10/v4l2.c
rename to drivers/staging/media/solo6x10/v4l2.c
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index b445cd6..2542c37 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -275,7 +275,7 @@
 		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
-			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
 			hw_buffer.s.size = fs->size;
 			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
 		}
diff --git a/drivers/staging/rts5139/rts51x_scsi.c b/drivers/staging/rts5139/rts51x_scsi.c
index 3b32f9e..87c9cdc 100644
--- a/drivers/staging/rts5139/rts51x_scsi.c
+++ b/drivers/staging/rts5139/rts51x_scsi.c
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_eh.h>
diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c
index 480b0ed..115635f 100644
--- a/drivers/staging/rts_pstor/rtsx.c
+++ b/drivers/staging/rts_pstor/rtsx.c
@@ -1021,6 +1021,7 @@
 	th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan");
 	if (IS_ERR(th)) {
 		printk(KERN_ERR "Unable to start the device-scanning thread\n");
+		complete(&dev->scanning_done);
 		quiesce_and_remove_host(dev);
 		err = PTR_ERR(th);
 		goto errout;
diff --git a/drivers/staging/slicoss/Kconfig b/drivers/staging/slicoss/Kconfig
index 5cde96b..5c2a15b 100644
--- a/drivers/staging/slicoss/Kconfig
+++ b/drivers/staging/slicoss/Kconfig
@@ -1,6 +1,6 @@
 config SLICOSS
 	tristate "Alacritech Gigabit IS-NIC support"
-	depends on PCI && X86
+	depends on PCI && X86 && NET
 	default n
 	help
 	  This driver supports Alacritech's IS-NIC gigabit ethernet cards.
diff --git a/drivers/staging/spectra/lld_mtd.c b/drivers/staging/spectra/lld_mtd.c
index 2bd3466..a9c309a 100644
--- a/drivers/staging/spectra/lld_mtd.c
+++ b/drivers/staging/spectra/lld_mtd.c
@@ -340,7 +340,7 @@
 		struct mtd_oob_ops ops;
 		int ret;
 
-		ops.mode = MTD_OOB_AUTO;
+		ops.mode = MTD_OPS_AUTO_OOB;
 		ops.datbuf = read_data;
 		ops.len = DeviceInfo.wPageDataSize;
 		ops.oobbuf = read_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
@@ -400,7 +400,7 @@
 		struct mtd_oob_ops ops;
 		int ret;
 
-		ops.mode = MTD_OOB_AUTO;
+		ops.mode = MTD_OPS_AUTO_OOB;
 		ops.datbuf = write_data;
 		ops.len = DeviceInfo.wPageDataSize;
 		ops.oobbuf = write_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
@@ -473,7 +473,7 @@
 		struct mtd_oob_ops ops;
 		int ret;
 
-		ops.mode = MTD_OOB_AUTO;
+		ops.mode = MTD_OPS_AUTO_OOB;
 		ops.datbuf = NULL;
 		ops.len = 0;
 		ops.oobbuf = read_data;
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index f4b53d1..3b7a847 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/sock.h>
 
 #include "usbip_common.h"
diff --git a/drivers/staging/usbip/usbip_event.c b/drivers/staging/usbip/usbip_event.c
index ecd1862..d332a34 100644
--- a/drivers/staging/usbip/usbip_event.c
+++ b/drivers/staging/usbip/usbip_event.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kthread.h>
+#include <linux/export.h>
 
 #include "usbip_common.h"
 
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index 09c44ab..3872b8c 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -68,6 +68,7 @@
 {
 	struct usbip_device *ud = &vdev->ud;
 	struct urb *urb;
+	unsigned long flags;
 
 	spin_lock(&vdev->priv_lock);
 	urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum);
@@ -101,9 +102,9 @@
 
 	usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
 
-	spin_lock(&the_controller->lock);
+	spin_lock_irqsave(&the_controller->lock, flags);
 	usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
-	spin_unlock(&the_controller->lock);
+	spin_unlock_irqrestore(&the_controller->lock, flags);
 
 	usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
 
@@ -141,6 +142,7 @@
 {
 	struct vhci_unlink *unlink;
 	struct urb *urb;
+	unsigned long flags;
 
 	usbip_dump_header(pdu);
 
@@ -170,9 +172,9 @@
 		urb->status = pdu->u.ret_unlink.status;
 		pr_info("urb->status %d\n", urb->status);
 
-		spin_lock(&the_controller->lock);
+		spin_lock_irqsave(&the_controller->lock, flags);
 		usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
-		spin_unlock(&the_controller->lock);
+		spin_unlock_irqrestore(&the_controller->lock, flags);
 
 		usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
 				     urb->status);
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index a2e8bd4..f958eb4 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -11,6 +11,7 @@
  */
 #include <net/mac80211.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 
 #include "core.h"
 #include "mds_f.h"
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 3215802..2faee2d 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -82,6 +82,7 @@
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index b9926ee..09de99f 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -556,7 +556,7 @@
 /*
  * Handler function for all zram I/O requests.
  */
-static int zram_make_request(struct request_queue *queue, struct bio *bio)
+static void zram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct zram *zram = queue->queuedata;
 
@@ -575,13 +575,12 @@
 	__zram_make_request(zram, bio, bio_data_dir(bio));
 	up_read(&zram->init_lock);
 
-	return 0;
+	return;
 
 error_unlock:
 	up_read(&zram->init_lock);
 error:
 	bio_io_error(bio);
-	return 0;
 }
 
 void __zram_reset_device(struct zram *zram)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 4d01768..0fd96c1 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -22,6 +22,7 @@
 #include <linux/kthread.h>
 #include <linux/crypto.h>
 #include <linux/completion.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 #include <scsi/scsi_device.h>
 #include <scsi/iscsi_proto.h>
@@ -1079,7 +1080,9 @@
 	 */
 	if (!cmd->immediate_data) {
 		cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
-		if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
+		if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
+			return 0;
+		else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
 			return iscsit_add_reject_from_cmd(
 				ISCSI_REASON_PROTOCOL_ERROR,
 				1, 0, buf, cmd);
@@ -1819,17 +1822,16 @@
 		int cmdsn_ret = iscsit_sequence_cmd(conn, cmd, hdr->cmdsn);
 		if (cmdsn_ret == CMDSN_HIGHER_THAN_EXP)
 			out_of_order_cmdsn = 1;
-		else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
+		else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP)
 			return 0;
-		} else { /* (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) */
+		else if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
 			return iscsit_add_reject_from_cmd(
 					ISCSI_REASON_PROTOCOL_ERROR,
 					1, 0, buf, cmd);
-		}
 	}
 	iscsit_ack_from_expstatsn(conn, hdr->exp_statsn);
 
-	if (out_of_order_cmdsn)
+	if (out_of_order_cmdsn || !(hdr->opcode & ISCSI_OP_IMMEDIATE))
 		return 0;
 	/*
 	 * Found the referenced task, send to transport for processing.
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index f1643db..db32784 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -20,6 +20,7 @@
  ****************************************************************************/
 
 #include <linux/configfs.h>
+#include <linux/export.h>
 #include <target/target_core_base.h>
 #include <target/target_core_transport.h>
 #include <target/target_core_fabric_ops.h>
diff --git a/drivers/target/iscsi/iscsi_target_stat.c b/drivers/target/iscsi/iscsi_target_stat.c
index bbdbe93..f1db830 100644
--- a/drivers/target/iscsi/iscsi_target_stat.c
+++ b/drivers/target/iscsi/iscsi_target_stat.c
@@ -20,6 +20,7 @@
  ******************************************************************************/
 
 #include <linux/configfs.h>
+#include <linux/export.h>
 #include <scsi/iscsi_proto.h>
 #include <target/target_core_base.h>
 #include <target/target_core_transport.h>
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index b15d8cb..3df1c9b 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -174,6 +174,24 @@
 		sgl_bidi = sdb->table.sgl;
 		sgl_bidi_count = sdb->table.nents;
 	}
+	/*
+	 * Because some userspace code via scsi-generic do not memset their
+	 * associated read buffers, go ahead and do that here for type
+	 * SCF_SCSI_CONTROL_SG_IO_CDB.  Also note that this is currently
+	 * guaranteed to be a single SGL for SCF_SCSI_CONTROL_SG_IO_CDB
+	 * by target core in transport_generic_allocate_tasks() ->
+	 * transport_generic_cmd_sequencer().
+	 */
+	if (se_cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB &&
+	    se_cmd->data_direction == DMA_FROM_DEVICE) {
+		struct scatterlist *sg = scsi_sglist(sc);
+		unsigned char *buf = kmap(sg_page(sg)) + sg->offset;
+
+		if (buf != NULL) {
+			memset(buf, 0, sg->length);
+			kunmap(sg_page(sg));
+		}
+	}
 
 	/* Tell the core about our preallocated memory */
 	ret = transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc),
@@ -187,7 +205,7 @@
 /*
  * Called from struct target_core_fabric_ops->check_stop_free()
  */
-static void tcm_loop_check_stop_free(struct se_cmd *se_cmd)
+static int tcm_loop_check_stop_free(struct se_cmd *se_cmd)
 {
 	/*
 	 * Do not release struct se_cmd's containing a valid TMR
@@ -195,12 +213,13 @@
 	 * with transport_generic_free_cmd().
 	 */
 	if (se_cmd->se_tmr_req)
-		return;
+		return 0;
 	/*
 	 * Release the struct se_cmd, which will make a callback to release
 	 * struct tcm_loop_cmd * in tcm_loop_deallocate_core_cmd()
 	 */
 	transport_generic_free_cmd(se_cmd, 0);
+	return 1;
 }
 
 static void tcm_loop_release_cmd(struct se_cmd *se_cmd)
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 8f44477..88f2ad4 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/configfs.h>
+#include <linux/export.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -58,8 +59,9 @@
  *
  * See spc4r17 section 6.27
  */
-int core_emulate_report_target_port_groups(struct se_cmd *cmd)
+int target_emulate_report_target_port_groups(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
 	struct se_port *port;
 	struct t10_alua_tg_pt_gp *tg_pt_gp;
@@ -164,6 +166,8 @@
 
 	transport_kunmap_first_data_page(cmd);
 
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
@@ -172,8 +176,9 @@
  *
  * See spc4r17 section 6.35
  */
-int core_emulate_set_target_port_groups(struct se_cmd *cmd)
+int target_emulate_set_target_port_groups(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	struct se_subsystem_dev *su_dev = dev->se_sub_dev;
 	struct se_port *port, *l_port = cmd->se_lun->lun_sep;
@@ -341,7 +346,8 @@
 
 out:
 	transport_kunmap_first_data_page(cmd);
-
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
diff --git a/drivers/target/target_core_alua.h b/drivers/target/target_core_alua.h
index c86f97a..c5b4ecd 100644
--- a/drivers/target/target_core_alua.h
+++ b/drivers/target/target_core_alua.h
@@ -66,8 +66,8 @@
 extern struct kmem_cache *t10_alua_tg_pt_gp_cache;
 extern struct kmem_cache *t10_alua_tg_pt_gp_mem_cache;
 
-extern int core_emulate_report_target_port_groups(struct se_cmd *);
-extern int core_emulate_set_target_port_groups(struct se_cmd *);
+extern int target_emulate_report_target_port_groups(struct se_task *);
+extern int target_emulate_set_target_port_groups(struct se_task *);
 extern int core_alua_check_nonop_delay(struct se_cmd *);
 extern int core_alua_do_port_transition(struct t10_alua_tg_pt_gp *,
 				struct se_device *, struct se_port *,
diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c
index 38535eb1..683ba02 100644
--- a/drivers/target/target_core_cdb.c
+++ b/drivers/target/target_core_cdb.c
@@ -32,6 +32,7 @@
 #include <target/target_core_transport.h>
 #include <target/target_core_fabric_ops.h>
 #include "target_core_ua.h"
+#include "target_core_cdb.h"
 
 static void
 target_fill_alua_data(struct se_port *port, unsigned char *buf)
@@ -679,16 +680,18 @@
 	return 0;
 }
 
-static int
-target_emulate_inquiry(struct se_cmd *cmd)
+int target_emulate_inquiry(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	unsigned char *buf;
 	unsigned char *cdb = cmd->t_task_cdb;
 	int p, ret;
 
-	if (!(cdb[1] & 0x1))
-		return target_emulate_inquiry_std(cmd);
+	if (!(cdb[1] & 0x1)) {
+		ret = target_emulate_inquiry_std(cmd);
+		goto out;
+	}
 
 	/*
 	 * Make sure we at least have 4 bytes of INQUIRY response
@@ -707,22 +710,30 @@
 
 	buf[0] = dev->transport->get_device_type(dev);
 
-	for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p)
+	for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) {
 		if (cdb[2] == evpd_handlers[p].page) {
 			buf[1] = cdb[2];
 			ret = evpd_handlers[p].emulate(cmd, buf);
-			transport_kunmap_first_data_page(cmd);
-			return ret;
+			goto out_unmap;
 		}
+	}
 
-	transport_kunmap_first_data_page(cmd);
 	pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]);
-	return -EINVAL;
+	ret = -EINVAL;
+
+out_unmap:
+	transport_kunmap_first_data_page(cmd);
+out:
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return ret;
 }
 
-static int
-target_emulate_readcapacity(struct se_cmd *cmd)
+int target_emulate_readcapacity(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	unsigned char *buf;
 	unsigned long long blocks_long = dev->transport->get_blocks(dev);
@@ -751,12 +762,14 @@
 
 	transport_kunmap_first_data_page(cmd);
 
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
-static int
-target_emulate_readcapacity_16(struct se_cmd *cmd)
+int target_emulate_readcapacity_16(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	unsigned char *buf;
 	unsigned long long blocks = dev->transport->get_blocks(dev);
@@ -784,6 +797,8 @@
 
 	transport_kunmap_first_data_page(cmd);
 
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
@@ -922,14 +937,15 @@
 	}
 }
 
-static int
-target_emulate_modesense(struct se_cmd *cmd, int ten)
+int target_emulate_modesense(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	char *cdb = cmd->t_task_cdb;
 	unsigned char *rbuf;
 	int type = dev->transport->get_device_type(dev);
-	int offset = (ten) ? 8 : 4;
+	int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10);
+	int offset = ten ? 8 : 4;
 	int length = 0;
 	unsigned char buf[SE_MODE_PAGE_BUF];
 
@@ -995,12 +1011,14 @@
 	memcpy(rbuf, buf, offset);
 	transport_kunmap_first_data_page(cmd);
 
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
-static int
-target_emulate_request_sense(struct se_cmd *cmd)
+int target_emulate_request_sense(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
 	unsigned char *cdb = cmd->t_task_cdb;
 	unsigned char *buf;
 	u8 ua_asc = 0, ua_ascq = 0;
@@ -1059,7 +1077,8 @@
 
 end:
 	transport_kunmap_first_data_page(cmd);
-
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
@@ -1067,8 +1086,7 @@
  * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
  * Note this is not used for TCM/pSCSI passthrough
  */
-static int
-target_emulate_unmap(struct se_task *task)
+int target_emulate_unmap(struct se_task *task)
 {
 	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
@@ -1079,6 +1097,12 @@
 	int ret = 0, offset;
 	unsigned short dl, bd_dl;
 
+	if (!dev->transport->do_discard) {
+		pr_err("UNMAP emulation not supported for: %s\n",
+				dev->transport->name);
+		return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+	}
+
 	/* First UNMAP block descriptor starts at 8 byte offset */
 	offset = 8;
 	size -= 8;
@@ -1110,7 +1134,10 @@
 
 err:
 	transport_kunmap_first_data_page(cmd);
-
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
 	return ret;
 }
 
@@ -1118,14 +1145,28 @@
  * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support.
  * Note this is not used for TCM/pSCSI passthrough
  */
-static int
-target_emulate_write_same(struct se_task *task, u32 num_blocks)
+int target_emulate_write_same(struct se_task *task)
 {
 	struct se_cmd *cmd = task->task_se_cmd;
 	struct se_device *dev = cmd->se_dev;
 	sector_t range;
 	sector_t lba = cmd->t_task_lba;
+	u32 num_blocks;
 	int ret;
+
+	if (!dev->transport->do_discard) {
+		pr_err("WRITE_SAME emulation not supported"
+				" for: %s\n", dev->transport->name);
+		return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+	}
+
+	if (cmd->t_task_cdb[0] == WRITE_SAME)
+		num_blocks = get_unaligned_be16(&cmd->t_task_cdb[7]);
+	else if (cmd->t_task_cdb[0] == WRITE_SAME_16)
+		num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
+	else /* WRITE_SAME_32 via VARIABLE_LENGTH_CMD */
+		num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
+
 	/*
 	 * Use the explicit range when non zero is supplied, otherwise calculate
 	 * the remaining range based on ->get_blocks() - starting LBA.
@@ -1144,127 +1185,30 @@
 		return ret;
 	}
 
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
 	return 0;
 }
 
-int
-transport_emulate_control_cdb(struct se_task *task)
+int target_emulate_synchronize_cache(struct se_task *task)
 {
-	struct se_cmd *cmd = task->task_se_cmd;
-	struct se_device *dev = cmd->se_dev;
-	unsigned short service_action;
-	int ret = 0;
+	struct se_device *dev = task->task_se_cmd->se_dev;
 
-	switch (cmd->t_task_cdb[0]) {
-	case INQUIRY:
-		ret = target_emulate_inquiry(cmd);
-		break;
-	case READ_CAPACITY:
-		ret = target_emulate_readcapacity(cmd);
-		break;
-	case MODE_SENSE:
-		ret = target_emulate_modesense(cmd, 0);
-		break;
-	case MODE_SENSE_10:
-		ret = target_emulate_modesense(cmd, 1);
-		break;
-	case SERVICE_ACTION_IN:
-		switch (cmd->t_task_cdb[1] & 0x1f) {
-		case SAI_READ_CAPACITY_16:
-			ret = target_emulate_readcapacity_16(cmd);
-			break;
-		default:
-			pr_err("Unsupported SA: 0x%02x\n",
-				cmd->t_task_cdb[1] & 0x1f);
-			return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-		}
-		break;
-	case REQUEST_SENSE:
-		ret = target_emulate_request_sense(cmd);
-		break;
-	case UNMAP:
-		if (!dev->transport->do_discard) {
-			pr_err("UNMAP emulation not supported for: %s\n",
-					dev->transport->name);
-			return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-		}
-		ret = target_emulate_unmap(task);
-		break;
-	case WRITE_SAME:
-		if (!dev->transport->do_discard) {
-			pr_err("WRITE_SAME emulation not supported"
-					" for: %s\n", dev->transport->name);
-			return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-		}
-		ret = target_emulate_write_same(task,
-				get_unaligned_be16(&cmd->t_task_cdb[7]));
-		break;
-	case WRITE_SAME_16:
-		if (!dev->transport->do_discard) {
-			pr_err("WRITE_SAME_16 emulation not supported"
-					" for: %s\n", dev->transport->name);
-			return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-		}
-		ret = target_emulate_write_same(task,
-				get_unaligned_be32(&cmd->t_task_cdb[10]));
-		break;
-	case VARIABLE_LENGTH_CMD:
-		service_action =
-			get_unaligned_be16(&cmd->t_task_cdb[8]);
-		switch (service_action) {
-		case WRITE_SAME_32:
-			if (!dev->transport->do_discard) {
-				pr_err("WRITE_SAME_32 SA emulation not"
-					" supported for: %s\n",
-					dev->transport->name);
-				return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-			}
-			ret = target_emulate_write_same(task,
-				get_unaligned_be32(&cmd->t_task_cdb[28]));
-			break;
-		default:
-			pr_err("Unsupported VARIABLE_LENGTH_CMD SA:"
-					" 0x%02x\n", service_action);
-			break;
-		}
-		break;
-	case SYNCHRONIZE_CACHE:
-	case 0x91: /* SYNCHRONIZE_CACHE_16: */
-		if (!dev->transport->do_sync_cache) {
-			pr_err("SYNCHRONIZE_CACHE emulation not supported"
-				" for: %s\n", dev->transport->name);
-			return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
-		}
-		dev->transport->do_sync_cache(task);
-		break;
-	case ALLOW_MEDIUM_REMOVAL:
-	case ERASE:
-	case REZERO_UNIT:
-	case SEEK_10:
-	case SPACE:
-	case START_STOP:
-	case TEST_UNIT_READY:
-	case VERIFY:
-	case WRITE_FILEMARKS:
-		break;
-	default:
-		pr_err("Unsupported SCSI Opcode: 0x%02x for %s\n",
-			cmd->t_task_cdb[0], dev->transport->name);
+	if (!dev->transport->do_sync_cache) {
+		pr_err("SYNCHRONIZE_CACHE emulation not supported"
+			" for: %s\n", dev->transport->name);
 		return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
 	}
 
-	if (ret < 0)
-		return ret;
-	/*
-	 * Handle the successful completion here unless a caller
-	 * has explictly requested an asychronous completion.
-	 */
-	if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
-		task->task_scsi_status = GOOD;
-		transport_complete_task(task, 1);
-	}
+	dev->transport->do_sync_cache(task);
+	return 0;
+}
 
-	return PYX_TRANSPORT_SENT_TO_TRANSPORT;
+int target_emulate_noop(struct se_task *task)
+{
+	task->task_scsi_status = GOOD;
+	transport_complete_task(task, 1);
+	return 0;
 }
 
 /*
diff --git a/drivers/target/target_core_cdb.h b/drivers/target/target_core_cdb.h
new file mode 100644
index 0000000..ad6b1e3
--- /dev/null
+++ b/drivers/target/target_core_cdb.h
@@ -0,0 +1,14 @@
+#ifndef TARGET_CORE_CDB_H
+#define TARGET_CORE_CDB_H
+
+int target_emulate_inquiry(struct se_task *task);
+int target_emulate_readcapacity(struct se_task *task);
+int target_emulate_readcapacity_16(struct se_task *task);
+int target_emulate_modesense(struct se_task *task);
+int target_emulate_request_sense(struct se_task *task);
+int target_emulate_unmap(struct se_task *task);
+int target_emulate_write_same(struct se_task *task);
+int target_emulate_synchronize_cache(struct se_task *task);
+int target_emulate_noop(struct se_task *task);
+
+#endif /* TARGET_CORE_CDB_H */
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index f870c3b..ba5edec 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <linux/kthread.h>
 #include <linux/in.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/tcp.h>
 #include <scsi/scsi.h>
@@ -651,23 +652,15 @@
 	lun->lun_se_dev = NULL;
 }
 
-int transport_core_report_lun_response(struct se_cmd *se_cmd)
+int target_report_luns(struct se_task *se_task)
 {
+	struct se_cmd *se_cmd = se_task->task_se_cmd;
 	struct se_dev_entry *deve;
 	struct se_lun *se_lun;
 	struct se_session *se_sess = se_cmd->se_sess;
-	struct se_task *se_task;
 	unsigned char *buf;
 	u32 cdb_offset = 0, lun_count = 0, offset = 8, i;
 
-	list_for_each_entry(se_task, &se_cmd->t_task_list, t_list)
-		break;
-
-	if (!se_task) {
-		pr_err("Unable to locate struct se_task for struct se_cmd\n");
-		return PYX_TRANSPORT_LU_COMM_FAILURE;
-	}
-
 	buf = transport_kmap_first_data_page(se_cmd);
 
 	/*
@@ -713,6 +706,8 @@
 	buf[2] = ((lun_count >> 8) & 0xff);
 	buf[3] = (lun_count & 0xff);
 
+	se_task->task_scsi_status = GOOD;
+	transport_complete_task(se_task, 1);
 	return PYX_TRANSPORT_SENT_TO_TRANSPORT;
 }
 
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 39f021b..ec4249b 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -29,6 +29,7 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
+#include <linux/export.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 19a0be9..67cd6fe 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -32,6 +32,7 @@
 #include <linux/blkdev.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 
diff --git a/drivers/target/target_core_hba.c b/drivers/target/target_core_hba.c
index 0639b97..c68019d 100644
--- a/drivers/target/target_core_hba.c
+++ b/drivers/target/target_core_hba.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/in.h>
+#include <linux/module.h>
 #include <net/sock.h>
 #include <net/tcp.h>
 
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 41ad02b..7698efe 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -37,6 +37,7 @@
 #include <linux/bio.h>
 #include <linux/genhd.h>
 #include <linux/file.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 0c4f783..5a4ebfc 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -116,114 +116,21 @@
 	return ret;
 }
 
-static int core_scsi2_reservation_release(struct se_cmd *cmd)
-{
-	struct se_device *dev = cmd->se_dev;
-	struct se_session *sess = cmd->se_sess;
-	struct se_portal_group *tpg = sess->se_tpg;
-
-	if (!sess || !tpg)
-		return 0;
-
-	spin_lock(&dev->dev_reservation_lock);
-	if (!dev->dev_reserved_node_acl || !sess) {
-		spin_unlock(&dev->dev_reservation_lock);
-		return 0;
-	}
-
-	if (dev->dev_reserved_node_acl != sess->se_node_acl) {
-		spin_unlock(&dev->dev_reservation_lock);
-		return 0;
-	}
-	dev->dev_reserved_node_acl = NULL;
-	dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
-	if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
-		dev->dev_res_bin_isid = 0;
-		dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
-	}
-	pr_debug("SCSI-2 Released reservation for %s LUN: %u ->"
-		" MAPPED LUN: %u for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
-		cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
-		sess->se_node_acl->initiatorname);
-	spin_unlock(&dev->dev_reservation_lock);
-
-	return 0;
-}
-
-static int core_scsi2_reservation_reserve(struct se_cmd *cmd)
-{
-	struct se_device *dev = cmd->se_dev;
-	struct se_session *sess = cmd->se_sess;
-	struct se_portal_group *tpg = sess->se_tpg;
-
-	if ((cmd->t_task_cdb[1] & 0x01) &&
-	    (cmd->t_task_cdb[1] & 0x02)) {
-		pr_err("LongIO and Obselete Bits set, returning"
-				" ILLEGAL_REQUEST\n");
-		return PYX_TRANSPORT_ILLEGAL_REQUEST;
-	}
-	/*
-	 * This is currently the case for target_core_mod passthrough struct se_cmd
-	 * ops
-	 */
-	if (!sess || !tpg)
-		return 0;
-
-	spin_lock(&dev->dev_reservation_lock);
-	if (dev->dev_reserved_node_acl &&
-	   (dev->dev_reserved_node_acl != sess->se_node_acl)) {
-		pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
-			tpg->se_tpg_tfo->get_fabric_name());
-		pr_err("Original reserver LUN: %u %s\n",
-			cmd->se_lun->unpacked_lun,
-			dev->dev_reserved_node_acl->initiatorname);
-		pr_err("Current attempt - LUN: %u -> MAPPED LUN: %u"
-			" from %s \n", cmd->se_lun->unpacked_lun,
-			cmd->se_deve->mapped_lun,
-			sess->se_node_acl->initiatorname);
-		spin_unlock(&dev->dev_reservation_lock);
-		return PYX_TRANSPORT_RESERVATION_CONFLICT;
-	}
-
-	dev->dev_reserved_node_acl = sess->se_node_acl;
-	dev->dev_flags |= DF_SPC2_RESERVATIONS;
-	if (sess->sess_bin_isid != 0) {
-		dev->dev_res_bin_isid = sess->sess_bin_isid;
-		dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
-	}
-	pr_debug("SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
-		" for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
-		cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
-		sess->se_node_acl->initiatorname);
-	spin_unlock(&dev->dev_reservation_lock);
-
-	return 0;
-}
-
 static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *,
 					struct se_node_acl *, struct se_session *);
 static void core_scsi3_put_pr_reg(struct t10_pr_registration *);
 
-/*
- * Setup in target_core_transport.c:transport_generic_cmd_sequencer()
- * and called via struct se_cmd->transport_emulate_cdb() in TCM processing
- * thread context.
- */
-int core_scsi2_emulate_crh(struct se_cmd *cmd)
+static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret)
 {
 	struct se_session *se_sess = cmd->se_sess;
 	struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev;
 	struct t10_pr_registration *pr_reg;
 	struct t10_reservation *pr_tmpl = &su_dev->t10_pr;
-	unsigned char *cdb = &cmd->t_task_cdb[0];
 	int crh = (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS);
 	int conflict = 0;
 
-	if (!se_sess)
-		return 0;
-
 	if (!crh)
-		goto after_crh;
+		return false;
 
 	pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl,
 			se_sess);
@@ -251,14 +158,16 @@
 		 */
 		if (pr_reg->pr_res_holder) {
 			core_scsi3_put_pr_reg(pr_reg);
-			return 0;
+			*ret = 0;
+			return false;
 		}
 		if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) ||
 		    (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
 		    (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
 			core_scsi3_put_pr_reg(pr_reg);
-			return 0;
+			*ret = 0;
+			return true;
 		}
 		core_scsi3_put_pr_reg(pr_reg);
 		conflict = 1;
@@ -282,18 +191,118 @@
 		pr_err("Received legacy SPC-2 RESERVE/RELEASE"
 			" while active SPC-3 registrations exist,"
 			" returning RESERVATION_CONFLICT\n");
-		return PYX_TRANSPORT_RESERVATION_CONFLICT;
+		*ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+		return true;
 	}
 
-after_crh:
-	if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10))
-		return core_scsi2_reservation_reserve(cmd);
-	else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10))
-		return core_scsi2_reservation_release(cmd);
-	else
-		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+	return false;
 }
 
+int target_scsi2_reservation_release(struct se_task *task)
+{
+	struct se_cmd *cmd = task->task_se_cmd;
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	struct se_portal_group *tpg = sess->se_tpg;
+	int ret = 0;
+
+	if (!sess || !tpg)
+		goto out;
+	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+		goto out;
+
+	ret = 0;
+	spin_lock(&dev->dev_reservation_lock);
+	if (!dev->dev_reserved_node_acl || !sess)
+		goto out_unlock;
+
+	if (dev->dev_reserved_node_acl != sess->se_node_acl)
+		goto out_unlock;
+
+	dev->dev_reserved_node_acl = NULL;
+	dev->dev_flags &= ~DF_SPC2_RESERVATIONS;
+	if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) {
+		dev->dev_res_bin_isid = 0;
+		dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID;
+	}
+	pr_debug("SCSI-2 Released reservation for %s LUN: %u ->"
+		" MAPPED LUN: %u for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
+		cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
+		sess->se_node_acl->initiatorname);
+
+out_unlock:
+	spin_unlock(&dev->dev_reservation_lock);
+out:
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return ret;
+}
+
+int target_scsi2_reservation_reserve(struct se_task *task)
+{
+	struct se_cmd *cmd = task->task_se_cmd;
+	struct se_device *dev = cmd->se_dev;
+	struct se_session *sess = cmd->se_sess;
+	struct se_portal_group *tpg = sess->se_tpg;
+	int ret = 0;
+
+	if ((cmd->t_task_cdb[1] & 0x01) &&
+	    (cmd->t_task_cdb[1] & 0x02)) {
+		pr_err("LongIO and Obselete Bits set, returning"
+				" ILLEGAL_REQUEST\n");
+		ret = PYX_TRANSPORT_ILLEGAL_REQUEST;
+		goto out;
+	}
+	/*
+	 * This is currently the case for target_core_mod passthrough struct se_cmd
+	 * ops
+	 */
+	if (!sess || !tpg)
+		goto out;
+	if (target_check_scsi2_reservation_conflict(cmd, &ret))
+		goto out;
+
+	ret = 0;
+	spin_lock(&dev->dev_reservation_lock);
+	if (dev->dev_reserved_node_acl &&
+	   (dev->dev_reserved_node_acl != sess->se_node_acl)) {
+		pr_err("SCSI-2 RESERVATION CONFLIFT for %s fabric\n",
+			tpg->se_tpg_tfo->get_fabric_name());
+		pr_err("Original reserver LUN: %u %s\n",
+			cmd->se_lun->unpacked_lun,
+			dev->dev_reserved_node_acl->initiatorname);
+		pr_err("Current attempt - LUN: %u -> MAPPED LUN: %u"
+			" from %s \n", cmd->se_lun->unpacked_lun,
+			cmd->se_deve->mapped_lun,
+			sess->se_node_acl->initiatorname);
+		ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+		goto out_unlock;
+	}
+
+	dev->dev_reserved_node_acl = sess->se_node_acl;
+	dev->dev_flags |= DF_SPC2_RESERVATIONS;
+	if (sess->sess_bin_isid != 0) {
+		dev->dev_res_bin_isid = sess->sess_bin_isid;
+		dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID;
+	}
+	pr_debug("SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u"
+		" for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
+		cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun,
+		sess->se_node_acl->initiatorname);
+
+out_unlock:
+	spin_unlock(&dev->dev_reservation_lock);
+out:
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return ret;
+}
+
+
 /*
  * Begin SPC-3/SPC-4 Persistent Reservations emulation support
  *
@@ -418,12 +427,12 @@
 		break;
 	case RELEASE:
 	case RELEASE_10:
-		/* Handled by CRH=1 in core_scsi2_emulate_crh() */
+		/* Handled by CRH=1 in target_scsi2_reservation_release() */
 		ret = 0;
 		break;
 	case RESERVE:
 	case RESERVE_10:
-		/* Handled by CRH=1 in core_scsi2_emulate_crh() */
+		/* Handled by CRH=1 in target_scsi2_reservation_reserve() */
 		ret = 0;
 		break;
 	case TEST_UNIT_READY:
@@ -3739,12 +3748,33 @@
 /*
  * See spc4r17 section 6.14 Table 170
  */
-static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
+int target_scsi3_emulate_pr_out(struct se_task *task)
 {
+	struct se_cmd *cmd = task->task_se_cmd;
+	unsigned char *cdb = &cmd->t_task_cdb[0];
 	unsigned char *buf;
 	u64 res_key, sa_res_key;
 	int sa, scope, type, aptpl;
 	int spec_i_pt = 0, all_tg_pt = 0, unreg = 0;
+	int ret;
+
+	/*
+	 * Following spc2r20 5.5.1 Reservations overview:
+	 *
+	 * If a logical unit has been reserved by any RESERVE command and is
+	 * still reserved by any initiator, all PERSISTENT RESERVE IN and all
+	 * PERSISTENT RESERVE OUT commands shall conflict regardless of
+	 * initiator or service action and shall terminate with a RESERVATION
+	 * CONFLICT status.
+	 */
+	if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) {
+		pr_err("Received PERSISTENT_RESERVE CDB while legacy"
+			" SPC-2 reservation is held, returning"
+			" RESERVATION_CONFLICT\n");
+		ret = PYX_TRANSPORT_RESERVATION_CONFLICT;
+		goto out;
+	}
+
 	/*
 	 * FIXME: A NULL struct se_session pointer means an this is not coming from
 	 * a $FABRIC_MOD's nexus, but from internal passthrough ops.
@@ -3755,7 +3785,8 @@
 	if (cmd->data_length < 24) {
 		pr_warn("SPC-PR: Received PR OUT parameter list"
 			" length too small: %u\n", cmd->data_length);
-		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
 	}
 	/*
 	 * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB)
@@ -3788,8 +3819,11 @@
 	/*
 	 * SPEC_I_PT=1 is only valid for Service action: REGISTER
 	 */
-	if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER))
-		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+	if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) {
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
+	}
+
 	/*
 	 * From spc4r17 section 6.14:
 	 *
@@ -3803,7 +3837,8 @@
 	    (cmd->data_length != 24)) {
 		pr_warn("SPC-PR: Received PR OUT illegal parameter"
 			" list length: %u\n", cmd->data_length);
-		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST;
+		goto out;
 	}
 	/*
 	 * (core_scsi3_emulate_pro_* function parameters
@@ -3812,35 +3847,47 @@
 	 */
 	switch (sa) {
 	case PRO_REGISTER:
-		return core_scsi3_emulate_pro_register(cmd,
+		ret = core_scsi3_emulate_pro_register(cmd,
 			res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0);
+		break;
 	case PRO_RESERVE:
-		return core_scsi3_emulate_pro_reserve(cmd,
-			type, scope, res_key);
+		ret = core_scsi3_emulate_pro_reserve(cmd, type, scope, res_key);
+		break;
 	case PRO_RELEASE:
-		return core_scsi3_emulate_pro_release(cmd,
-			type, scope, res_key);
+		ret = core_scsi3_emulate_pro_release(cmd, type, scope, res_key);
+		break;
 	case PRO_CLEAR:
-		return core_scsi3_emulate_pro_clear(cmd, res_key);
+		ret = core_scsi3_emulate_pro_clear(cmd, res_key);
+		break;
 	case PRO_PREEMPT:
-		return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+		ret = core_scsi3_emulate_pro_preempt(cmd, type, scope,
 					res_key, sa_res_key, 0);
+		break;
 	case PRO_PREEMPT_AND_ABORT:
-		return core_scsi3_emulate_pro_preempt(cmd, type, scope,
+		ret = core_scsi3_emulate_pro_preempt(cmd, type, scope,
 					res_key, sa_res_key, 1);
+		break;
 	case PRO_REGISTER_AND_IGNORE_EXISTING_KEY:
-		return core_scsi3_emulate_pro_register(cmd,
+		ret = core_scsi3_emulate_pro_register(cmd,
 			0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1);
+		break;
 	case PRO_REGISTER_AND_MOVE:
-		return core_scsi3_emulate_pro_register_and_move(cmd, res_key,
+		ret = core_scsi3_emulate_pro_register_and_move(cmd, res_key,
 				sa_res_key, aptpl, unreg);
+		break;
 	default:
 		pr_err("Unknown PERSISTENT_RESERVE_OUT service"
 			" action: 0x%02x\n", cdb[1] & 0x1f);
-		return PYX_TRANSPORT_INVALID_CDB_FIELD;
+		ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+		break;
 	}
 
-	return PYX_TRANSPORT_INVALID_CDB_FIELD;
+out:
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return ret;
 }
 
 /*
@@ -4190,29 +4237,11 @@
 	return 0;
 }
 
-static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb)
+int target_scsi3_emulate_pr_in(struct se_task *task)
 {
-	switch (cdb[1] & 0x1f) {
-	case PRI_READ_KEYS:
-		return core_scsi3_pri_read_keys(cmd);
-	case PRI_READ_RESERVATION:
-		return core_scsi3_pri_read_reservation(cmd);
-	case PRI_REPORT_CAPABILITIES:
-		return core_scsi3_pri_report_capabilities(cmd);
-	case PRI_READ_FULL_STATUS:
-		return core_scsi3_pri_read_full_status(cmd);
-	default:
-		pr_err("Unknown PERSISTENT_RESERVE_IN service"
-			" action: 0x%02x\n", cdb[1] & 0x1f);
-		return PYX_TRANSPORT_INVALID_CDB_FIELD;
-	}
+	struct se_cmd *cmd = task->task_se_cmd;
+	int ret;
 
-}
-
-int core_scsi3_emulate_pr(struct se_cmd *cmd)
-{
-	unsigned char *cdb = &cmd->t_task_cdb[0];
-	struct se_device *dev = cmd->se_dev;
 	/*
 	 * Following spc2r20 5.5.1 Reservations overview:
 	 *
@@ -4222,16 +4251,38 @@
 	 * initiator or service action and shall terminate with a RESERVATION
 	 * CONFLICT status.
 	 */
-	if (dev->dev_flags & DF_SPC2_RESERVATIONS) {
+	if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) {
 		pr_err("Received PERSISTENT_RESERVE CDB while legacy"
 			" SPC-2 reservation is held, returning"
 			" RESERVATION_CONFLICT\n");
 		return PYX_TRANSPORT_RESERVATION_CONFLICT;
 	}
 
-	return (cdb[0] == PERSISTENT_RESERVE_OUT) ?
-	       core_scsi3_emulate_pr_out(cmd, cdb) :
-	       core_scsi3_emulate_pr_in(cmd, cdb);
+	switch (cmd->t_task_cdb[1] & 0x1f) {
+	case PRI_READ_KEYS:
+		ret = core_scsi3_pri_read_keys(cmd);
+		break;
+	case PRI_READ_RESERVATION:
+		ret = core_scsi3_pri_read_reservation(cmd);
+		break;
+	case PRI_REPORT_CAPABILITIES:
+		ret = core_scsi3_pri_report_capabilities(cmd);
+		break;
+	case PRI_READ_FULL_STATUS:
+		ret = core_scsi3_pri_read_full_status(cmd);
+		break;
+	default:
+		pr_err("Unknown PERSISTENT_RESERVE_IN service"
+			" action: 0x%02x\n", cmd->t_task_cdb[1] & 0x1f);
+		ret = PYX_TRANSPORT_INVALID_CDB_FIELD;
+		break;
+	}
+
+	if (!ret) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return ret;
 }
 
 static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type)
diff --git a/drivers/target/target_core_pr.h b/drivers/target/target_core_pr.h
index c8f47d0..b97f694 100644
--- a/drivers/target/target_core_pr.h
+++ b/drivers/target/target_core_pr.h
@@ -47,7 +47,8 @@
 
 extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
 			char *, u32);
-extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int target_scsi2_reservation_release(struct se_task *task);
+extern int target_scsi2_reservation_reserve(struct se_task *task);
 extern int core_scsi3_alloc_aptpl_registration(
 			struct t10_reservation *, u64,
 			unsigned char *, unsigned char *, u32,
@@ -61,7 +62,9 @@
 extern unsigned char *core_scsi3_pr_dump_type(int);
 extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
 						  struct se_cmd *);
-extern int core_scsi3_emulate_pr(struct se_cmd *);
+
+extern int target_scsi3_emulate_pr_in(struct se_task *task);
+extern int target_scsi3_emulate_pr_out(struct se_task *task);
 extern int core_setup_reservations(struct se_device *, int);
 
 #endif /* TARGET_CORE_PR_H */
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index dad671d..ed32e1e 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -36,6 +36,7 @@
 #include <linux/genhd.h>
 #include <linux/cdrom.h>
 #include <linux/file.h>
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
@@ -1091,7 +1092,7 @@
 
 		req = blk_make_request(pdv->pdv_sd->request_queue, hbio,
 				       GFP_KERNEL);
-		if (!req) {
+		if (IS_ERR(req)) {
 			pr_err("pSCSI: blk_make_request() failed\n");
 			goto fail;
 		}
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 570b144..217e29d 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/export.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -118,7 +119,7 @@
 		/*
 		 * Allow the received TMR to return with FUNCTION_COMPLETE.
 		 */
-		if (tmr && (tmr_p == tmr))
+		if (tmr_p == tmr)
 			continue;
 
 		cmd = tmr_p->task_cmd;
@@ -147,19 +148,18 @@
 		}
 		spin_unlock(&cmd->t_state_lock);
 
-		list_move_tail(&tmr->tmr_list, &drain_tmr_list);
+		list_move_tail(&tmr_p->tmr_list, &drain_tmr_list);
 	}
 	spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
 
-	while (!list_empty(&drain_tmr_list)) {
-		tmr = list_entry(drain_tmr_list.next, struct se_tmr_req, tmr_list);
-		list_del(&tmr->tmr_list);
+	list_for_each_entry_safe(tmr_p, tmr_pp, &drain_tmr_list, tmr_list) {
+		list_del_init(&tmr_p->tmr_list);
 		cmd = tmr_p->task_cmd;
 
 		pr_debug("LUN_RESET: %s releasing TMR %p Function: 0x%02x,"
 			" Response: 0x%02x, t_state: %d\n",
-			(preempt_and_abort_list) ? "Preempt" : "", tmr,
-			tmr->function, tmr->response, cmd->t_state);
+			(preempt_and_abort_list) ? "Preempt" : "", tmr_p,
+			tmr_p->function, tmr_p->response, cmd->t_state);
 
 		transport_cmd_finish_abort(cmd, 1);
 	}
@@ -330,16 +330,6 @@
 		 */
 		if (prout_cmd == cmd)
 			continue;
-		/*
-		 * Skip direct processing of TRANSPORT_FREE_CMD_INTR for
-		 * HW target mode fabrics.
-		 */
-		spin_lock(&cmd->t_state_lock);
-		if (cmd->t_state == TRANSPORT_FREE_CMD_INTR) {
-			spin_unlock(&cmd->t_state_lock);
-			continue;
-		}
-		spin_unlock(&cmd->t_state_lock);
 
 		atomic_set(&cmd->t_transport_queue_active, 0);
 		atomic_dec(&qobj->queue_cnt);
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 49fd0a9..8ddd133 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/in.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/tcp.h>
 #include <scsi/scsi.h>
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index d752558..3400ae6 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -36,6 +36,7 @@
 #include <linux/kthread.h>
 #include <linux/in.h>
 #include <linux/cdrom.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 #include <net/sock.h>
 #include <net/tcp.h>
@@ -52,6 +53,7 @@
 #include <target/target_core_configfs.h>
 
 #include "target_core_alua.h"
+#include "target_core_cdb.h"
 #include "target_core_hba.h"
 #include "target_core_pr.h"
 #include "target_core_ua.h"
@@ -268,6 +270,9 @@
 	}
 	INIT_LIST_HEAD(&se_sess->sess_list);
 	INIT_LIST_HEAD(&se_sess->sess_acl_list);
+	INIT_LIST_HEAD(&se_sess->sess_cmd_list);
+	INIT_LIST_HEAD(&se_sess->sess_wait_list);
+	spin_lock_init(&se_sess->sess_cmd_lock);
 
 	return se_sess;
 }
@@ -514,13 +519,16 @@
 			 * Some fabric modules like tcm_loop can release
 			 * their internally allocated I/O reference now and
 			 * struct se_cmd now.
+			 *
+			 * Fabric modules are expected to return '1' here if the
+			 * se_cmd being passed is released at this point,
+			 * or zero if not being released.
 			 */
 			if (cmd->se_tfo->check_stop_free != NULL) {
 				spin_unlock_irqrestore(
 					&cmd->t_state_lock, flags);
 
-				cmd->se_tfo->check_stop_free(cmd);
-				return 1;
+				return cmd->se_tfo->check_stop_free(cmd);
 			}
 		}
 		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
@@ -730,6 +738,10 @@
 		complete(&task->task_stop_comp);
 		return;
 	}
+
+	if (!success)
+		cmd->t_tasks_failed = 1;
+
 	/*
 	 * Decrement the outstanding t_task_cdbs_left count.  The last
 	 * struct se_task from struct se_cmd will complete itself into the
@@ -740,7 +752,7 @@
 		return;
 	}
 
-	if (!success || cmd->t_tasks_failed) {
+	if (cmd->t_tasks_failed) {
 		if (!task->task_error_status) {
 			task->task_error_status =
 				PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
@@ -908,7 +920,7 @@
 }
 
 /*
- * Handle QUEUE_FULL / -EAGAIN status
+ * Handle QUEUE_FULL / -EAGAIN and -ENOMEM status
  */
 
 static void target_qf_do_work(struct work_struct *work)
@@ -1498,11 +1510,12 @@
 	INIT_LIST_HEAD(&cmd->se_ordered_node);
 	INIT_LIST_HEAD(&cmd->se_qf_node);
 	INIT_LIST_HEAD(&cmd->se_queue_node);
-
+	INIT_LIST_HEAD(&cmd->se_cmd_list);
 	INIT_LIST_HEAD(&cmd->t_task_list);
 	init_completion(&cmd->transport_lun_fe_stop_comp);
 	init_completion(&cmd->transport_lun_stop_comp);
 	init_completion(&cmd->t_transport_stop_comp);
+	init_completion(&cmd->cmd_wait_comp);
 	spin_lock_init(&cmd->t_state_lock);
 	atomic_set(&cmd->transport_dev_active, 1);
 
@@ -1645,9 +1658,7 @@
 	 * and call transport_generic_request_failure() if necessary..
 	 */
 	ret = transport_generic_new_cmd(cmd);
-	if (ret == -EAGAIN)
-		return 0;
-	else if (ret < 0) {
+	if (ret < 0) {
 		cmd->transport_error_status = ret;
 		transport_generic_request_failure(cmd, 0,
 				(cmd->data_direction != DMA_TO_DEVICE));
@@ -1717,13 +1728,6 @@
 }
 EXPORT_SYMBOL(transport_generic_handle_tmr);
 
-void transport_generic_free_cmd_intr(
-	struct se_cmd *cmd)
-{
-	transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR, false);
-}
-EXPORT_SYMBOL(transport_generic_free_cmd_intr);
-
 /*
  * If the task is active, request it to be stopped and sleep until it
  * has completed.
@@ -1886,7 +1890,7 @@
 				ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS);
 
 		ret = cmd->se_tfo->queue_status(cmd);
-		if (ret == -EAGAIN)
+		if (ret == -EAGAIN || ret == -ENOMEM)
 			goto queue_full;
 		goto check_stop;
 	case PYX_TRANSPORT_USE_SENSE_REASON:
@@ -1913,7 +1917,7 @@
 	else {
 		ret = transport_send_check_condition_and_sense(cmd,
 				cmd->scsi_sense_reason, 0);
-		if (ret == -EAGAIN)
+		if (ret == -EAGAIN || ret == -ENOMEM)
 			goto queue_full;
 	}
 
@@ -2153,62 +2157,20 @@
 		atomic_set(&cmd->t_transport_sent, 1);
 
 	spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-	/*
-	 * The struct se_cmd->transport_emulate_cdb() function pointer is used
-	 * to grab REPORT_LUNS and other CDBs we want to handle before they hit the
-	 * struct se_subsystem_api->do_task() caller below.
-	 */
-	if (cmd->transport_emulate_cdb) {
-		error = cmd->transport_emulate_cdb(cmd);
-		if (error != 0) {
-			cmd->transport_error_status = error;
-			spin_lock_irqsave(&cmd->t_state_lock, flags);
-			task->task_flags &= ~TF_ACTIVE;
-			spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-			atomic_set(&cmd->t_transport_sent, 0);
-			transport_stop_tasks_for_cmd(cmd);
-			atomic_inc(&dev->depth_left);
-			transport_generic_request_failure(cmd, 0, 1);
-			goto check_depth;
-		}
-		/*
-		 * Handle the successful completion for transport_emulate_cdb()
-		 * for synchronous operation, following SCF_EMULATE_CDB_ASYNC
-		 * Otherwise the caller is expected to complete the task with
-		 * proper status.
-		 */
-		if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
-			cmd->scsi_status = SAM_STAT_GOOD;
-			task->task_scsi_status = GOOD;
-			transport_complete_task(task, 1);
-		}
-	} else {
-		/*
-		 * Currently for all virtual TCM plugins including IBLOCK, FILEIO and
-		 * RAMDISK we use the internal transport_emulate_control_cdb() logic
-		 * with struct se_subsystem_api callers for the primary SPC-3 TYPE_DISK
-		 * LUN emulation code.
-		 *
-		 * For TCM/pSCSI and all other SCF_SCSI_DATA_SG_IO_CDB I/O tasks we
-		 * call ->do_task() directly and let the underlying TCM subsystem plugin
-		 * code handle the CDB emulation.
-		 */
-		if ((dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) &&
-		    (!(task->task_se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
-			error = transport_emulate_control_cdb(task);
-		else
-			error = dev->transport->do_task(task);
 
-		if (error != 0) {
-			cmd->transport_error_status = error;
-			spin_lock_irqsave(&cmd->t_state_lock, flags);
-			task->task_flags &= ~TF_ACTIVE;
-			spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-			atomic_set(&cmd->t_transport_sent, 0);
-			transport_stop_tasks_for_cmd(cmd);
-			atomic_inc(&dev->depth_left);
-			transport_generic_request_failure(cmd, 0, 1);
-		}
+	if (cmd->execute_task)
+		error = cmd->execute_task(task);
+	else
+		error = dev->transport->do_task(task);
+	if (error != 0) {
+		cmd->transport_error_status = error;
+		spin_lock_irqsave(&cmd->t_state_lock, flags);
+		task->task_flags &= ~TF_ACTIVE;
+		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+		atomic_set(&cmd->t_transport_sent, 0);
+		transport_stop_tasks_for_cmd(cmd);
+		atomic_inc(&dev->depth_left);
+		transport_generic_request_failure(cmd, 0, 1);
 	}
 
 	goto check_depth;
@@ -2642,6 +2604,13 @@
 		 */
 	}
 
+	/*
+	 * If we operate in passthrough mode we skip most CDB emulation and
+	 * instead hand the commands down to the physical SCSI device.
+	 */
+	passthrough =
+		(dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV);
+
 	switch (cdb[0]) {
 	case READ_6:
 		sectors = transport_get_sectors_6(cdb, cmd, &sector_ret);
@@ -2721,9 +2690,12 @@
 		cmd->t_task_lba = transport_lba_32(cdb);
 		cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
 
-		if (dev->transport->transport_type ==
-				TRANSPORT_PLUGIN_PHBA_PDEV)
+		/*
+		 * Do now allow BIDI commands for passthrough mode.
+		 */
+		if (passthrough)
 			goto out_unsupported_cdb;
+
 		/*
 		 * Setup BIDI XOR callback to be run after I/O completion.
 		 */
@@ -2732,13 +2704,6 @@
 		break;
 	case VARIABLE_LENGTH_CMD:
 		service_action = get_unaligned_be16(&cdb[8]);
-		/*
-		 * Determine if this is TCM/PSCSI device and we should disable
-		 * internal emulation for this CDB.
-		 */
-		passthrough = (dev->transport->transport_type ==
-					TRANSPORT_PLUGIN_PHBA_PDEV);
-
 		switch (service_action) {
 		case XDWRITEREAD_32:
 			sectors = transport_get_sectors_32(cdb, cmd, &sector_ret);
@@ -2752,8 +2717,12 @@
 			cmd->t_task_lba = transport_lba_64_ext(cdb);
 			cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB;
 
+			/*
+			 * Do now allow BIDI commands for passthrough mode.
+			 */
 			if (passthrough)
 				goto out_unsupported_cdb;
+
 			/*
 			 * Setup BIDI XOR callback to be run during after I/O
 			 * completion.
@@ -2779,7 +2748,8 @@
 
 			if (target_check_write_same_discard(&cdb[10], dev) < 0)
 				goto out_invalid_cdb_field;
-
+			if (!passthrough)
+				cmd->execute_task = target_emulate_write_same;
 			break;
 		default:
 			pr_err("VARIABLE_LENGTH_CMD service action"
@@ -2793,12 +2763,10 @@
 			/*
 			 * Check for emulated MI_REPORT_TARGET_PGS.
 			 */
-			if (cdb[1] == MI_REPORT_TARGET_PGS) {
-				cmd->transport_emulate_cdb =
-				(su_dev->t10_alua.alua_type ==
-				 SPC3_ALUA_EMULATED) ?
-				core_emulate_report_target_port_groups :
-				NULL;
+			if (cdb[1] == MI_REPORT_TARGET_PGS &&
+			    su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+				cmd->execute_task =
+					target_emulate_report_target_port_groups;
 			}
 			size = (cdb[6] << 24) | (cdb[7] << 16) |
 			       (cdb[8] << 8) | cdb[9];
@@ -2819,8 +2787,15 @@
 	case MODE_SENSE:
 		size = cdb[4];
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_modesense;
 		break;
 	case MODE_SENSE_10:
+		size = (cdb[7] << 8) + cdb[8];
+		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_modesense;
+		break;
 	case GPCMD_READ_BUFFER_CAPACITY:
 	case GPCMD_SEND_OPC:
 	case LOG_SELECT:
@@ -2840,11 +2815,14 @@
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
 		break;
 	case PERSISTENT_RESERVE_IN:
+		if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+			cmd->execute_task = target_scsi3_emulate_pr_in;
+		size = (cdb[7] << 8) + cdb[8];
+		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		break;
 	case PERSISTENT_RESERVE_OUT:
-		cmd->transport_emulate_cdb =
-			(su_dev->t10_pr.res_type ==
-			 SPC3_PERSISTENT_RESERVATIONS) ?
-			core_scsi3_emulate_pr : NULL;
+		if (su_dev->t10_pr.res_type == SPC3_PERSISTENT_RESERVATIONS)
+			cmd->execute_task = target_scsi3_emulate_pr_out;
 		size = (cdb[7] << 8) + cdb[8];
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
 		break;
@@ -2863,12 +2841,10 @@
 			 *
 			 * Check for emulated MO_SET_TARGET_PGS.
 			 */
-			if (cdb[1] == MO_SET_TARGET_PGS) {
-				cmd->transport_emulate_cdb =
-				(su_dev->t10_alua.alua_type ==
-					SPC3_ALUA_EMULATED) ?
-				core_emulate_set_target_port_groups :
-				NULL;
+			if (cdb[1] == MO_SET_TARGET_PGS &&
+			    su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
+				cmd->execute_task =
+					target_emulate_set_target_port_groups;
 			}
 
 			size = (cdb[6] << 24) | (cdb[7] << 16) |
@@ -2888,6 +2864,8 @@
 		if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED)
 			cmd->sam_task_attr = MSG_HEAD_TAG;
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_inquiry;
 		break;
 	case READ_BUFFER:
 		size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
@@ -2896,6 +2874,8 @@
 	case READ_CAPACITY:
 		size = READ_CAP_LEN;
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_readcapacity;
 		break;
 	case READ_MEDIA_SERIAL_NUMBER:
 	case SECURITY_PROTOCOL_IN:
@@ -2904,6 +2884,21 @@
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
 		break;
 	case SERVICE_ACTION_IN:
+		switch (cmd->t_task_cdb[1] & 0x1f) {
+		case SAI_READ_CAPACITY_16:
+			if (!passthrough)
+				cmd->execute_task =
+					target_emulate_readcapacity_16;
+			break;
+		default:
+			if (passthrough)
+				break;
+
+			pr_err("Unsupported SA: 0x%02x\n",
+				cmd->t_task_cdb[1] & 0x1f);
+			goto out_unsupported_cdb;
+		}
+		/*FALLTHROUGH*/
 	case ACCESS_CONTROL_IN:
 	case ACCESS_CONTROL_OUT:
 	case EXTENDED_COPY:
@@ -2934,6 +2929,8 @@
 	case REQUEST_SENSE:
 		size = cdb[4];
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_request_sense;
 		break;
 	case READ_ELEMENT_STATUS:
 		size = 65536 * cdb[7] + 256 * cdb[8] + cdb[9];
@@ -2961,10 +2958,8 @@
 		 * is running in SPC_PASSTHROUGH, and wants reservations
 		 * emulation disabled.
 		 */
-		cmd->transport_emulate_cdb =
-				(su_dev->t10_pr.res_type !=
-				 SPC_PASSTHROUGH) ?
-				core_scsi2_emulate_crh : NULL;
+		if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+			cmd->execute_task = target_scsi2_reservation_reserve;
 		cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
 		break;
 	case RELEASE:
@@ -2978,10 +2973,8 @@
 		else
 			size = cmd->data_length;
 
-		cmd->transport_emulate_cdb =
-				(su_dev->t10_pr.res_type !=
-				 SPC_PASSTHROUGH) ?
-				core_scsi2_emulate_crh : NULL;
+		if (su_dev->t10_pr.res_type != SPC_PASSTHROUGH)
+			cmd->execute_task = target_scsi2_reservation_release;
 		cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
 		break;
 	case SYNCHRONIZE_CACHE:
@@ -3002,16 +2995,9 @@
 		size = transport_get_size(sectors, cdb, cmd);
 		cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
 
-		/*
-		 * For TCM/pSCSI passthrough, skip cmd->transport_emulate_cdb()
-		 */
-		if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV)
+		if (passthrough)
 			break;
-		/*
-		 * Set SCF_EMULATE_CDB_ASYNC to ensure asynchronous operation
-		 * for SYNCHRONIZE_CACHE* Immed=1 case in __transport_execute_tasks()
-		 */
-		cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC;
+
 		/*
 		 * Check to ensure that LBA + Range does not exceed past end of
 		 * device for IBLOCK and FILEIO ->do_sync_cache() backend calls
@@ -3020,10 +3006,13 @@
 			if (transport_cmd_get_valid_sectors(cmd) < 0)
 				goto out_invalid_cdb_field;
 		}
+		cmd->execute_task = target_emulate_synchronize_cache;
 		break;
 	case UNMAP:
 		size = get_unaligned_be16(&cdb[7]);
 		cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_unmap;
 		break;
 	case WRITE_SAME_16:
 		sectors = transport_get_sectors_16(cdb, cmd, &sector_ret);
@@ -3042,6 +3031,8 @@
 
 		if (target_check_write_same_discard(&cdb[1], dev) < 0)
 			goto out_invalid_cdb_field;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_write_same;
 		break;
 	case WRITE_SAME:
 		sectors = transport_get_sectors_10(cdb, cmd, &sector_ret);
@@ -3063,26 +3054,31 @@
 		 */
 		if (target_check_write_same_discard(&cdb[1], dev) < 0)
 			goto out_invalid_cdb_field;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_write_same;
 		break;
 	case ALLOW_MEDIUM_REMOVAL:
-	case GPCMD_CLOSE_TRACK:
 	case ERASE:
-	case INITIALIZE_ELEMENT_STATUS:
-	case GPCMD_LOAD_UNLOAD:
 	case REZERO_UNIT:
 	case SEEK_10:
-	case GPCMD_SET_SPEED:
 	case SPACE:
 	case START_STOP:
 	case TEST_UNIT_READY:
 	case VERIFY:
 	case WRITE_FILEMARKS:
+		cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
+		if (!passthrough)
+			cmd->execute_task = target_emulate_noop;
+		break;
+	case GPCMD_CLOSE_TRACK:
+	case INITIALIZE_ELEMENT_STATUS:
+	case GPCMD_LOAD_UNLOAD:
+	case GPCMD_SET_SPEED:
 	case MOVE_MEDIUM:
 		cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB;
 		break;
 	case REPORT_LUNS:
-		cmd->transport_emulate_cdb =
-				transport_core_report_lun_response;
+		cmd->execute_task = target_report_luns;
 		size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
 		/*
 		 * Do implict HEAD_OF_QUEUE processing for REPORT_LUNS
@@ -3134,6 +3130,11 @@
 		cmd->data_length = size;
 	}
 
+	/* reject any command that we don't have a handler for */
+	if (!(passthrough || cmd->execute_task ||
+	     (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
+		goto out_unsupported_cdb;
+
 	/* Let's limit control cdbs to a page, for simplicity's sake. */
 	if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) &&
 	    size > PAGE_SIZE)
@@ -3308,7 +3309,7 @@
 		if (cmd->scsi_status) {
 			ret = transport_send_check_condition_and_sense(
 					cmd, reason, 1);
-			if (ret == -EAGAIN)
+			if (ret == -EAGAIN || ret == -ENOMEM)
 				goto queue_full;
 
 			transport_lun_remove_cmd(cmd);
@@ -3333,7 +3334,7 @@
 		spin_unlock(&cmd->se_lun->lun_sep_lock);
 
 		ret = cmd->se_tfo->queue_data_in(cmd);
-		if (ret == -EAGAIN)
+		if (ret == -EAGAIN || ret == -ENOMEM)
 			goto queue_full;
 		break;
 	case DMA_TO_DEVICE:
@@ -3354,14 +3355,14 @@
 			}
 			spin_unlock(&cmd->se_lun->lun_sep_lock);
 			ret = cmd->se_tfo->queue_data_in(cmd);
-			if (ret == -EAGAIN)
+			if (ret == -EAGAIN || ret == -ENOMEM)
 				goto queue_full;
 			break;
 		}
 		/* Fall through for DMA_TO_DEVICE */
 	case DMA_NONE:
 		ret = cmd->se_tfo->queue_status(cmd);
-		if (ret == -EAGAIN)
+		if (ret == -EAGAIN || ret == -ENOMEM)
 			goto queue_full;
 		break;
 	default:
@@ -3890,7 +3891,10 @@
 
 static void transport_write_pending_qf(struct se_cmd *cmd)
 {
-	if (cmd->se_tfo->write_pending(cmd) == -EAGAIN) {
+	int ret;
+
+	ret = cmd->se_tfo->write_pending(cmd);
+	if (ret == -EAGAIN || ret == -ENOMEM) {
 		pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n",
 			 cmd);
 		transport_handle_queue_full(cmd, cmd->se_dev);
@@ -3920,7 +3924,7 @@
 	 * frontend know that WRITE buffers are ready.
 	 */
 	ret = cmd->se_tfo->write_pending(cmd);
-	if (ret == -EAGAIN)
+	if (ret == -EAGAIN || ret == -ENOMEM)
 		goto queue_full;
 	else if (ret < 0)
 		return ret;
@@ -3931,7 +3935,7 @@
 	pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd);
 	cmd->t_state = TRANSPORT_COMPLETE_QF_WP;
 	transport_handle_queue_full(cmd, cmd->se_dev);
-	return ret;
+	return 0;
 }
 
 /**
@@ -3949,6 +3953,14 @@
 		core_tmr_release_req(cmd->se_tmr_req);
 	if (cmd->t_task_cdb != cmd->__t_task_cdb)
 		kfree(cmd->t_task_cdb);
+	/*
+	 * Check if target_wait_for_sess_cmds() is expecting to
+	 * release se_cmd directly here..
+	 */
+	if (cmd->check_release != 0 && cmd->se_tfo->check_release_cmd)
+		if (cmd->se_tfo->check_release_cmd(cmd) != 0)
+			return;
+
 	cmd->se_tfo->release_cmd(cmd);
 }
 EXPORT_SYMBOL(transport_release_cmd);
@@ -3976,6 +3988,114 @@
 }
 EXPORT_SYMBOL(transport_generic_free_cmd);
 
+/* target_get_sess_cmd - Add command to active ->sess_cmd_list
+ * @se_sess:	session to reference
+ * @se_cmd:	command descriptor to add
+ */
+void target_get_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+	list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
+	se_cmd->check_release = 1;
+	spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+}
+EXPORT_SYMBOL(target_get_sess_cmd);
+
+/* target_put_sess_cmd - Check for active I/O shutdown or list delete
+ * @se_sess: 	session to reference
+ * @se_cmd:	command descriptor to drop
+ */
+int target_put_sess_cmd(struct se_session *se_sess, struct se_cmd *se_cmd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+	if (list_empty(&se_cmd->se_cmd_list)) {
+		spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) {
+		spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+		complete(&se_cmd->cmd_wait_comp);
+		return 1;
+	}
+	list_del(&se_cmd->se_cmd_list);
+	spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(target_put_sess_cmd);
+
+/* target_splice_sess_cmd_list - Split active cmds into sess_wait_list
+ * @se_sess:	session to split
+ */
+void target_splice_sess_cmd_list(struct se_session *se_sess)
+{
+	struct se_cmd *se_cmd;
+	unsigned long flags;
+
+	WARN_ON(!list_empty(&se_sess->sess_wait_list));
+	INIT_LIST_HEAD(&se_sess->sess_wait_list);
+
+	spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+	se_sess->sess_tearing_down = 1;
+
+	list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list);
+
+	list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list)
+		se_cmd->cmd_wait_set = 1;
+
+	spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+}
+EXPORT_SYMBOL(target_splice_sess_cmd_list);
+
+/* target_wait_for_sess_cmds - Wait for outstanding descriptors
+ * @se_sess:    session to wait for active I/O
+ * @wait_for_tasks:	Make extra transport_wait_for_tasks call
+ */
+void target_wait_for_sess_cmds(
+	struct se_session *se_sess,
+	int wait_for_tasks)
+{
+	struct se_cmd *se_cmd, *tmp_cmd;
+	bool rc = false;
+
+	list_for_each_entry_safe(se_cmd, tmp_cmd,
+				&se_sess->sess_wait_list, se_cmd_list) {
+		list_del(&se_cmd->se_cmd_list);
+
+		pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:"
+			" %d\n", se_cmd, se_cmd->t_state,
+			se_cmd->se_tfo->get_cmd_state(se_cmd));
+
+		if (wait_for_tasks) {
+			pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d,"
+				" fabric state: %d\n", se_cmd, se_cmd->t_state,
+				se_cmd->se_tfo->get_cmd_state(se_cmd));
+
+			rc = transport_wait_for_tasks(se_cmd);
+
+			pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d,"
+				" fabric state: %d\n", se_cmd, se_cmd->t_state,
+				se_cmd->se_tfo->get_cmd_state(se_cmd));
+		}
+
+		if (!rc) {
+			wait_for_completion(&se_cmd->cmd_wait_comp);
+			pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d"
+				" fabric state: %d\n", se_cmd, se_cmd->t_state,
+				se_cmd->se_tfo->get_cmd_state(se_cmd));
+		}
+
+		se_cmd->se_tfo->release_cmd(se_cmd);
+	}
+}
+EXPORT_SYMBOL(target_wait_for_sess_cmds);
+
 /*	transport_lun_wait_for_tasks():
  *
  *	Called from ConfigFS context to stop the passed struct se_cmd to allow
@@ -4152,14 +4272,14 @@
  * Called from frontend fabric context to wait for storage engine
  * to pause and/or release frontend generated struct se_cmd.
  */
-void transport_wait_for_tasks(struct se_cmd *cmd)
+bool transport_wait_for_tasks(struct se_cmd *cmd)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&cmd->t_state_lock, flags);
 	if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD) && !(cmd->se_tmr_req)) {
 		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-		return;
+		return false;
 	}
 	/*
 	 * Only perform a possible wait_for_tasks if SCF_SUPPORTED_SAM_OPCODE
@@ -4167,7 +4287,7 @@
 	 */
 	if (!(cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) && !cmd->se_tmr_req) {
 		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-		return;
+		return false;
 	}
 	/*
 	 * If we are already stopped due to an external event (ie: LUN shutdown)
@@ -4210,7 +4330,7 @@
 	if (!atomic_read(&cmd->t_transport_active) ||
 	     atomic_read(&cmd->t_transport_aborted)) {
 		spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-		return;
+		return false;
 	}
 
 	atomic_set(&cmd->t_transport_stop, 1);
@@ -4235,6 +4355,8 @@
 		cmd->se_tfo->get_task_tag(cmd));
 
 	spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
+	return true;
 }
 EXPORT_SYMBOL(transport_wait_for_tasks);
 
@@ -4583,9 +4705,7 @@
 				break;
 			}
 			ret = transport_generic_new_cmd(cmd);
-			if (ret == -EAGAIN)
-				break;
-			else if (ret < 0) {
+			if (ret < 0) {
 				cmd->transport_error_status = ret;
 				transport_generic_request_failure(cmd,
 					0, (cmd->data_direction !=
@@ -4595,9 +4715,6 @@
 		case TRANSPORT_PROCESS_WRITE:
 			transport_generic_process_write(cmd);
 			break;
-		case TRANSPORT_FREE_CMD_INTR:
-			transport_generic_free_cmd(cmd, 0);
-			break;
 		case TRANSPORT_PROCESS_TMR:
 			transport_generic_do_tmr(cmd);
 			break;
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
index 3749d8b..e05c551 100644
--- a/drivers/target/tcm_fc/tcm_fc.h
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -156,7 +156,7 @@
 /*
  * IO methods.
  */
-void ft_check_stop_free(struct se_cmd *);
+int ft_check_stop_free(struct se_cmd *);
 void ft_release_cmd(struct se_cmd *);
 int ft_queue_status(struct se_cmd *);
 int ft_queue_data_in(struct se_cmd *);
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index 6195026..4fac37c 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -112,9 +112,10 @@
 	ft_free_cmd(cmd);
 }
 
-void ft_check_stop_free(struct se_cmd *se_cmd)
+int ft_check_stop_free(struct se_cmd *se_cmd)
 {
 	transport_generic_free_cmd(se_cmd, 0);
+	return 1;
 }
 
 /*
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 708f8e9..dd9a574 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -678,10 +678,10 @@
 		return;
 
 	if (delay > 1000)
-		schedule_delayed_work(&(tz->poll_queue),
+		queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
 				      round_jiffies(msecs_to_jiffies(delay)));
 	else
-		schedule_delayed_work(&(tz->poll_queue),
+		queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
 				      msecs_to_jiffies(delay));
 }
 
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index e371753..4222035 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -34,6 +34,15 @@
 	help
 	  iSeries machines support a hypervisor virtual console.
 
+config HVC_OPAL
+	bool "OPAL Console support"
+	depends on PPC_POWERNV
+	select HVC_DRIVER
+	select HVC_IRQ
+	default y
+	help
+	  PowerNV machines running under OPAL need that driver to get a console
+
 config HVC_RTAS
 	bool "IBM RTAS Console support"
 	depends on PPC_RTAS
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index e292053..89abf40b 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi_lib.o
+obj-$(CONFIG_HVC_OPAL)		+= hvc_opal.o hvsi_lib.o
 obj-$(CONFIG_HVC_OLD_HVSI)	+= hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 7430bc3..b6b2d18 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -852,7 +852,7 @@
 	 * find index to use:
 	 * see if this vterm id matches one registered for console.
 	 */
-	for (i = 0; i < MAX_NR_HVC_CONSOLES; i++)
+	for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
 		if (vtermnos[i] == hp->vtermno &&
 		    cons_ops[i] == hp->ops)
 			break;
@@ -862,13 +862,9 @@
 		i = ++last_hvc;
 
 	hp->index = i;
-	hvc_console.index = i;
-	vtermnos[i] = vtermno;
-	cons_ops[i] = ops;
 
 	list_add_tail(&(hp->next), &hvc_structs);
 	spin_unlock(&hvc_structs_lock);
-	register_console(&hvc_console);
 
 	return hp;
 }
@@ -879,7 +875,6 @@
 	unsigned long flags;
 	struct tty_struct *tty;
 
-	unregister_console(&hvc_console);
 	spin_lock_irqsave(&hp->lock, flags);
 	tty = tty_kref_get(hp->tty);
 
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 435f6fa..44fbeba 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -46,6 +46,7 @@
 
 	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
 		: "=r" (__c));
+	isb();
 
 	return __c;
 }
@@ -55,6 +56,7 @@
 	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
 		: /* no output register */
 		: "r" (c));
+	isb();
 }
 
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
diff --git a/drivers/tty/hvc/hvc_iseries.c b/drivers/tty/hvc/hvc_iseries.c
index 21c5495..3f4a897 100644
--- a/drivers/tty/hvc/hvc_iseries.c
+++ b/drivers/tty/hvc/hvc_iseries.c
@@ -23,6 +23,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/console.h>
 
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
new file mode 100644
index 0000000..ced26c8
--- /dev/null
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -0,0 +1,425 @@
+/*
+ * opal driver interface to hvc_console.c
+ *
+ * Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
+
+#include <asm/hvconsole.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+#include <asm/hvsi.h>
+#include <asm/udbg.h>
+#include <asm/opal.h>
+
+#include "hvc_console.h"
+
+static const char hvc_opal_name[] = "hvc_opal";
+
+static struct of_device_id hvc_opal_match[] __devinitdata = {
+	{ .name = "serial", .compatible = "ibm,opal-console-raw" },
+	{ .name = "serial", .compatible = "ibm,opal-console-hvsi" },
+	{ },
+};
+
+typedef enum hv_protocol {
+	HV_PROTOCOL_RAW,
+	HV_PROTOCOL_HVSI
+} hv_protocol_t;
+
+struct hvc_opal_priv {
+	hv_protocol_t		proto;	/* Raw data or HVSI packets */
+	struct hvsi_priv	hvsi;	/* HVSI specific data */
+};
+static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES];
+
+/* For early boot console */
+static struct hvc_opal_priv hvc_opal_boot_priv;
+static u32 hvc_opal_boot_termno;
+
+static const struct hv_ops hvc_opal_raw_ops = {
+	.get_chars = opal_get_chars,
+	.put_chars = opal_put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
+	.notifier_hangup = notifier_hangup_irq,
+};
+
+static int hvc_opal_hvsi_get_chars(uint32_t vtermno, char *buf, int count)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+	if (WARN_ON(!pv))
+		return -ENODEV;
+
+	return hvsilib_get_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_put_chars(uint32_t vtermno, const char *buf, int count)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[vtermno];
+
+	if (WARN_ON(!pv))
+		return -ENODEV;
+
+	return hvsilib_put_chars(&pv->hvsi, buf, count);
+}
+
+static int hvc_opal_hvsi_open(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+	int rc;
+
+	pr_devel("HVSI@%x: do open !\n", hp->vtermno);
+
+	rc = notifier_add_irq(hp, data);
+	if (rc)
+		return rc;
+
+	return hvsilib_open(&pv->hvsi, hp);
+}
+
+static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: do close !\n", hp->vtermno);
+
+	hvsilib_close(&pv->hvsi, hp);
+
+	notifier_del_irq(hp, data);
+}
+
+void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: do hangup !\n", hp->vtermno);
+
+	hvsilib_close(&pv->hvsi, hp);
+
+	notifier_hangup_irq(hp, data);
+}
+
+static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	if (!pv)
+		return -EINVAL;
+	return pv->hvsi.mctrl;
+}
+
+static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set,
+				unsigned int clear)
+{
+	struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
+
+	pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n",
+		 hp->vtermno, set, clear);
+
+	if (set & TIOCM_DTR)
+		hvsilib_write_mctrl(&pv->hvsi, 1);
+	else if (clear & TIOCM_DTR)
+		hvsilib_write_mctrl(&pv->hvsi, 0);
+
+	return 0;
+}
+
+static const struct hv_ops hvc_opal_hvsi_ops = {
+	.get_chars = hvc_opal_hvsi_get_chars,
+	.put_chars = hvc_opal_hvsi_put_chars,
+	.notifier_add = hvc_opal_hvsi_open,
+	.notifier_del = hvc_opal_hvsi_close,
+	.notifier_hangup = hvc_opal_hvsi_hangup,
+	.tiocmget = hvc_opal_hvsi_tiocmget,
+	.tiocmset = hvc_opal_hvsi_tiocmset,
+};
+
+static int __devinit hvc_opal_probe(struct platform_device *dev)
+{
+	const struct hv_ops *ops;
+	struct hvc_struct *hp;
+	struct hvc_opal_priv *pv;
+	hv_protocol_t proto;
+	unsigned int termno, boot = 0;
+	const __be32 *reg;
+
+	if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
+		proto = HV_PROTOCOL_RAW;
+		ops = &hvc_opal_raw_ops;
+	} else if (of_device_is_compatible(dev->dev.of_node,
+					   "ibm,opal-console-hvsi")) {
+		proto = HV_PROTOCOL_HVSI;
+		ops = &hvc_opal_hvsi_ops;
+	} else {
+		pr_err("hvc_opal: Unkown protocol for %s\n",
+		       dev->dev.of_node->full_name);
+		return -ENXIO;
+	}
+
+	reg = of_get_property(dev->dev.of_node, "reg", NULL);
+	termno = reg ? be32_to_cpup(reg) : 0;
+
+	/* Is it our boot one ? */
+	if (hvc_opal_privs[termno] == &hvc_opal_boot_priv) {
+		pv = hvc_opal_privs[termno];
+		boot = 1;
+	} else if (hvc_opal_privs[termno] == NULL) {
+		pv = kzalloc(sizeof(struct hvc_opal_priv), GFP_KERNEL);
+		if (!pv)
+			return -ENOMEM;
+		pv->proto = proto;
+		hvc_opal_privs[termno] = pv;
+		if (proto == HV_PROTOCOL_HVSI)
+			hvsilib_init(&pv->hvsi, opal_get_chars, opal_put_chars,
+				     termno, 0);
+
+		/* Instanciate now to establish a mapping index==vtermno */
+		hvc_instantiate(termno, termno, ops);
+	} else {
+		pr_err("hvc_opal: Device %s has duplicate terminal number #%d\n",
+		       dev->dev.of_node->full_name, termno);
+		return -ENXIO;
+	}
+
+	pr_info("hvc%d: %s protocol on %s%s\n", termno,
+		proto == HV_PROTOCOL_RAW ? "raw" : "hvsi",
+		dev->dev.of_node->full_name,
+		boot ? " (boot console)" : "");
+
+	/* We don't do IRQ yet */
+	hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS);
+	if (IS_ERR(hp))
+		return PTR_ERR(hp);
+	dev_set_drvdata(&dev->dev, hp);
+
+	return 0;
+}
+
+static int __devexit hvc_opal_remove(struct platform_device *dev)
+{
+	struct hvc_struct *hp = dev_get_drvdata(&dev->dev);
+	int rc, termno;
+
+	termno = hp->vtermno;
+	rc = hvc_remove(hp);
+	if (rc == 0) {
+		if (hvc_opal_privs[termno] != &hvc_opal_boot_priv)
+			kfree(hvc_opal_privs[termno]);
+		hvc_opal_privs[termno] = NULL;
+	}
+	return rc;
+}
+
+static struct platform_driver hvc_opal_driver = {
+	.probe		= hvc_opal_probe,
+	.remove		= __devexit_p(hvc_opal_remove),
+	.driver		= {
+		.name	= hvc_opal_name,
+		.owner	= THIS_MODULE,
+		.of_match_table	= hvc_opal_match,
+	}
+};
+
+static int __init hvc_opal_init(void)
+{
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
+		return -ENODEV;
+
+	/* Register as a vio device to receive callbacks */
+	return platform_driver_register(&hvc_opal_driver);
+}
+module_init(hvc_opal_init);
+
+static void __exit hvc_opal_exit(void)
+{
+	platform_driver_unregister(&hvc_opal_driver);
+}
+module_exit(hvc_opal_exit);
+
+static void udbg_opal_putc(char c)
+{
+	unsigned int termno = hvc_opal_boot_termno;
+	int count = -1;
+
+	if (c == '\n')
+		udbg_opal_putc('\r');
+
+	do {
+		switch(hvc_opal_boot_priv.proto) {
+		case HV_PROTOCOL_RAW:
+			count = opal_put_chars(termno, &c, 1);
+			break;
+		case HV_PROTOCOL_HVSI:
+			count = hvc_opal_hvsi_put_chars(termno, &c, 1);
+			break;
+		}
+	} while(count == 0 || count == -EAGAIN);
+}
+
+static int udbg_opal_getc_poll(void)
+{
+	unsigned int termno = hvc_opal_boot_termno;
+	int rc = 0;
+	char c;
+
+	switch(hvc_opal_boot_priv.proto) {
+	case HV_PROTOCOL_RAW:
+		rc = opal_get_chars(termno, &c, 1);
+		break;
+	case HV_PROTOCOL_HVSI:
+		rc = hvc_opal_hvsi_get_chars(termno, &c, 1);
+		break;
+	}
+	if (!rc)
+		return -1;
+	return c;
+}
+
+static int udbg_opal_getc(void)
+{
+	int ch;
+	for (;;) {
+		ch = udbg_opal_getc_poll();
+		if (ch == -1) {
+			/* This shouldn't be needed...but... */
+			volatile unsigned long delay;
+			for (delay=0; delay < 2000000; delay++)
+				;
+		} else {
+			return ch;
+		}
+	}
+}
+
+static void udbg_init_opal_common(void)
+{
+	udbg_putc = udbg_opal_putc;
+	udbg_getc = udbg_opal_getc;
+	udbg_getc_poll = udbg_opal_getc_poll;
+	tb_ticks_per_usec = 0x200; /* Make udelay not suck */
+}
+
+void __init hvc_opal_init_early(void)
+{
+	struct device_node *stdout_node = NULL;
+	const u32 *termno;
+	const char *name = NULL;
+	const struct hv_ops *ops;
+	u32 index;
+
+	/* find the boot console from /chosen/stdout */
+	if (of_chosen)
+		name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name) {
+		stdout_node = of_find_node_by_path(name);
+		if (!stdout_node) {
+			pr_err("hvc_opal: Failed to locate default console!\n");
+			return;
+		}
+	} else {
+		struct device_node *opal, *np;
+
+		/* Current OPAL takeover doesn't provide the stdout
+		 * path, so we hard wire it
+		 */
+		opal = of_find_node_by_path("/ibm,opal/consoles");
+		if (opal)
+			pr_devel("hvc_opal: Found consoles in new location\n");
+		if (!opal) {
+			opal = of_find_node_by_path("/ibm,opal");
+			if (opal)
+				pr_devel("hvc_opal: "
+					 "Found consoles in old location\n");
+		}
+		if (!opal)
+			return;
+		for_each_child_of_node(opal, np) {
+			if (!strcmp(np->name, "serial")) {
+				stdout_node = np;
+				break;
+			}
+		}
+		of_node_put(opal);
+	}
+	if (!stdout_node)
+		return;
+	termno = of_get_property(stdout_node, "reg", NULL);
+	index = termno ? *termno : 0;
+	if (index >= MAX_NR_HVC_CONSOLES)
+		return;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+
+	/* Check the protocol */
+	if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) {
+		hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+		ops = &hvc_opal_raw_ops;
+		pr_devel("hvc_opal: Found RAW console\n");
+	}
+	else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) {
+		hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI;
+		ops = &hvc_opal_hvsi_ops;
+		hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars,
+			     opal_put_chars, index, 1);
+		/* HVSI, perform the handshake now */
+		hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+		pr_devel("hvc_opal: Found HVSI console\n");
+	} else
+		goto out;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+	add_preferred_console("hvc", index, NULL);
+	hvc_instantiate(index, index, ops);
+out:
+	of_node_put(stdout_node);
+}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
+void __init udbg_init_debug_opal(void)
+{
+	u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+	hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_RAW */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI
+void __init udbg_init_debug_opal_hvsi(void)
+{
+	u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+	hvc_opal_privs[index] = &hvc_opal_boot_priv;
+	hvc_opal_boot_termno = index;
+	udbg_init_opal_common();
+	hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars, opal_put_chars,
+		     index, 1);
+	hvsilib_establish(&hvc_opal_boot_priv.hvsi);
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI */
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 130aace..fc3c3ad 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -41,6 +41,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/console.h>
+#include <linux/module.h>
 
 #include <asm/hvconsole.h>
 #include <asm/vio.h>
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 55882b5..b9040be 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1532,7 +1532,7 @@
 		goto register_fail;
 	}
 
-	hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	hvcs_pi_buff = (unsigned long *) __get_free_page(GFP_KERNEL);
 	if (!hvcs_pi_buff) {
 		rc = -ENOMEM;
 		goto buff_alloc_fail;
@@ -1548,7 +1548,7 @@
 	return 0;
 
 kthread_fail:
-	kfree(hvcs_pi_buff);
+	free_page((unsigned long)hvcs_pi_buff);
 buff_alloc_fail:
 	tty_unregister_driver(hvcs_tty_driver);
 register_fail:
@@ -1597,7 +1597,7 @@
 	kthread_stop(hvcs_task);
 
 	spin_lock(&hvcs_pi_lock);
-	kfree(hvcs_pi_buff);
+	free_page((unsigned long)hvcs_pi_buff);
 	hvcs_pi_buff = NULL;
 	spin_unlock(&hvcs_pi_lock);
 
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index bd9b098..6f4dd83 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -183,7 +183,7 @@
 	unsigned int tries, read = 0;
 
 	if (WARN_ON(!pv))
-		return 0;
+		return -ENXIO;
 
 	/* If we aren't open, don't do anything in order to avoid races
 	 * with connection establishment. The hvc core will call this
@@ -234,7 +234,7 @@
 	int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA);
 
 	if (WARN_ON(!pv))
-		return 0;
+		return -ENODEV;
 
 	dp.hdr.type = VS_DATA_PACKET_HEADER;
 	dp.hdr.len = adjcount + sizeof(struct hvsi_header);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4cb0d0a..fc7bbba 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -66,14 +66,16 @@
 static int debug;
 module_param(debug, int, 0600);
 
-#define T1	(HZ/10)
-#define T2	(HZ/3)
-#define N2	3
+/* Defaults: these are from the specification */
+
+#define T1	10		/* 100mS */
+#define T2	34		/* 333mS */
+#define N2	3		/* Retry 3 times */
 
 /* Use long timers for testing at low speed with debug on */
 #ifdef DEBUG_TIMING
-#define T1	HZ
-#define T2	(2 * HZ)
+#define T1	100
+#define T2	200
 #endif
 
 /*
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index a87a56c..eeadf1b 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -450,24 +450,6 @@
 	__raw_writel(value, p->membase + offset);
 }
 
-static unsigned int tsi_serial_in(struct uart_port *p, int offset)
-{
-	unsigned int tmp;
-	offset = map_8250_in_reg(p, offset) << p->regshift;
-	if (offset == UART_IIR) {
-		tmp = readl(p->membase + (UART_IIR & ~3));
-		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-	} else
-		return readb(p->membase + offset);
-}
-
-static void tsi_serial_out(struct uart_port *p, int offset, int value)
-{
-	offset = map_8250_out_reg(p, offset) << p->regshift;
-	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-		writeb(value, p->membase + offset);
-}
-
 static unsigned int io_serial_in(struct uart_port *p, int offset)
 {
 	offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -508,11 +490,6 @@
 		p->serial_out = au_serial_out;
 		break;
 
-	case UPIO_TSI:
-		p->serial_in = tsi_serial_in;
-		p->serial_out = tsi_serial_out;
-		break;
-
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5f479da..925a1e5 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1560,7 +1560,7 @@
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
 	depends on PCI
 	select SERIAL_CORE
 	help
@@ -1568,12 +1568,12 @@
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config SERIAL_MSM_SMD
 	bool "Enable tty device interface for some SMD ports"
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4a0f86f..4c823f3 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -228,7 +228,7 @@
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
-		if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+		if ((rs485conf->delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
@@ -304,7 +304,7 @@
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
@@ -1228,7 +1228,7 @@
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
@@ -1447,16 +1447,6 @@
 		rs485conf->delay_rts_after_send = rs485_delay[1];
 		rs485conf->flags = 0;
 
-		if (rs485conf->delay_rts_before_send == 0 &&
-		    rs485conf->delay_rts_after_send == 0) {
-			rs485conf->flags |= SER_RS485_RTS_ON_SEND;
-		} else {
-			if (rs485conf->delay_rts_before_send)
-				rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
-			if (rs485conf->delay_rts_after_send)
-				rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
-		}
-
 		if (of_get_property(np, "rs485-rx-during-tx", NULL))
 			rs485conf->flags |= SER_RS485_RX_DURING_TX;
 
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index b743504..1dfba7b 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3234,9 +3234,8 @@
 		e100_disable_rx(info);
 		e100_enable_rx_irq(info);
 #endif
-		if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) &&
-			(info->rs485.delay_rts_before_send > 0))
-				msleep(info->rs485.delay_rts_before_send);
+		if (info->rs485.delay_rts_before_send > 0)
+			msleep(info->rs485.delay_rts_before_send);
 	}
 #endif /* CONFIG_ETRAX_RS485 */
 
@@ -3693,10 +3692,6 @@
 
 		rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
 		rs485data.flags = 0;
-		if (rs485data.delay_rts_before_send != 0)
-			rs485data.flags |= SER_RS485_RTS_BEFORE_SEND;
-		else
-			rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
 
 		if (rs485ctrl.enabled)
 			rs485data.flags |= SER_RS485_ENABLED;
@@ -4531,7 +4526,6 @@
 		/* Set sane defaults */
 		info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
 		info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
-		info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
 		info->rs485.delay_rts_before_send = 0;
 		info->rs485.flags &= ~(SER_RS485_ENABLED);
 #endif
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 648b6a3..7c867a0 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -24,7 +24,7 @@
  *
  *
  ***********************************************************************/
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 87e7e6c..2b42a01 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -19,6 +19,7 @@
 #include <linux/console.h>
 #include <linux/vt_kern.h>
 #include <linux/input.h>
+#include <linux/module.h>
 
 #define MAX_CONFIG_LEN		40
 
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 2af5aa5..8a6cc8c 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -43,6 +43,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index d73aadd..90c40f22e 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -36,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/sfi.h>
+#include <linux/module.h>
 #include <asm/mrst.h>
 #include "max3107.h"
 
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index db00b59..7827000 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/freezer.h>
+#include <linux/module.h>
 #include "max3107.h"
 
 static const struct baud_table brg26_ext[] = {
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 286c386..e272d39 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -884,7 +884,6 @@
 {
 	struct uart_hsu_port *up =
 			container_of(port, struct uart_hsu_port, port);
-	struct tty_struct *tty = port->state->port.tty;
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -907,8 +906,7 @@
 	}
 
 	/* CMSPAR isn't supported by this driver */
-	if (tty)
-		tty->termios->c_cflag &= ~CMSPAR;
+	termios->c_cflag &= ~CMSPAR;
 
 	if (termios->c_cflag & CSTOPB)
 		cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 9beaff1..dd4c31d 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -10,6 +10,7 @@
  *
  */
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/serial_reg.h>
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 21febef..d6aba8c 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1,5 +1,5 @@
 /*
- *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  *This program is free software; you can redistribute it and/or modify
  *it under the terms of the GNU General Public License as published by
@@ -46,8 +46,8 @@
 
 /* Set the max number of UART port
  * Intel EG20T PCH: 4 port
- * OKI SEMICONDUCTOR ML7213 IOH: 3 port
- * OKI SEMICONDUCTOR ML7223 IOH: 2 port
+ * LAPIS Semiconductor ML7213 IOH: 3 port
+ * LAPIS Semiconductor ML7223 IOH: 2 port
 */
 #define PCH_UART_NR	4
 
@@ -258,6 +258,8 @@
 	pch_ml7213_uart2,
 	pch_ml7223_uart0,
 	pch_ml7223_uart1,
+	pch_ml7831_uart0,
+	pch_ml7831_uart1,
 };
 
 static struct pch_uart_driver_data drv_dat[] = {
@@ -270,6 +272,8 @@
 	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
 	[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
 	[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 };
 
 static unsigned int default_baud = 9600;
@@ -628,6 +632,7 @@
 		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
 			__func__);
 		dma_release_channel(priv->chan_tx);
+		priv->chan_tx = NULL;
 		return;
 	}
 
@@ -1215,8 +1220,7 @@
 		dev_err(priv->port.dev,
 			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
-	if (priv->use_dma_flag)
-		pch_free_dma(port);
+	pch_free_dma(port);
 
 	free_irq(priv->port.irq, priv);
 }
@@ -1280,6 +1284,7 @@
 	if (rtn)
 		goto out;
 
+	pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
 	/* Don't rewrite B0 */
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1552,6 +1557,10 @@
 	 .driver_data = pch_ml7223_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
 	 .driver_data = pch_ml7223_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+	 .driver_data = pch_ml7831_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+	 .driver_data = pch_ml7831_uart1},
 	{0,},
 };
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9871c57..aff9d61 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -207,6 +207,25 @@
 	},
 
 	/*
+	 * Common SH-2(A) SCIF definitions for ports with FIFO data
+	 * count registers.
+	 */
+	[SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+	},
+
+	/*
 	 * Common SH-3 SCIF definitions.
 	 */
 	[SCIx_SH3_SCIF_REGTYPE] = {
@@ -1446,12 +1465,8 @@
 	dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
 		param->slave_id);
 
-	if (param->dma_dev == chan->device->dev) {
-		chan->private = param;
-		return true;
-	} else {
-		return false;
-	}
+	chan->private = param;
+	return true;
 }
 
 static void rx_timer_fn(unsigned long arg)
@@ -1477,10 +1492,10 @@
 	dma_cap_mask_t mask;
 	int nent;
 
-	dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__,
-		port->line, s->cfg->dma_dev);
+	dev_dbg(port->dev, "%s: port %d\n", __func__,
+		port->line);
 
-	if (!s->cfg->dma_dev)
+	if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
 		return;
 
 	dma_cap_zero(mask);
@@ -1490,7 +1505,6 @@
 
 	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
 	param->slave_id = s->cfg->dma_slave_tx;
-	param->dma_dev = s->cfg->dma_dev;
 
 	s->cookie_tx = -EINVAL;
 	chan = dma_request_channel(mask, filter, param);
@@ -1519,7 +1533,6 @@
 
 	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
 	param->slave_id = s->cfg->dma_slave_rx;
-	param->dma_dev = s->cfg->dma_dev;
 
 	chan = dma_request_channel(mask, filter, param);
 	dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
@@ -1564,9 +1577,6 @@
 {
 	struct sci_port *s = to_sci_port(port);
 
-	if (!s->cfg->dma_dev)
-		return;
-
 	if (s->chan_tx)
 		sci_tx_dma_release(s, false);
 	if (s->chan_rx)
@@ -1981,9 +1991,9 @@
 	port->serial_in		= sci_serial_in;
 	port->serial_out	= sci_serial_out;
 
-	if (p->dma_dev)
-		dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n",
-			p->dma_dev, p->dma_slave_tx, p->dma_slave_rx);
+	if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
+		dev_dbg(port->dev, "DMA tx %d, rx %d\n",
+			p->dma_slave_tx, p->dma_slave_rx);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index a4b63bf..e76c8b7 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -29,6 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "timbuart.h"
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 8c03b12..b627363 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/module.h>
 
 #define XUARTPS_TTY_NAME	"ttyPS"
 #define XUARTPS_NAME		"xuartps"
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 512c49f..8e0924f 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -36,6 +36,7 @@
 
 #include <linux/kmod.h>
 #include <linux/nsproxy.h>
+#include <linux/ratelimit.h>
 
 /*
  *	This guards the refcounted line discipline lists. The lock
@@ -547,15 +548,16 @@
 /**
  *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
  *	@tty: tty to wait for
+ *	@timeout: for how long to wait at most
  *
  *	Wait for the line discipline to become idle. The discipline must
  *	have been halted for this to guarantee it remains idle.
  */
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
 {
-	int ret;
+	long ret;
 	ret = wait_event_timeout(tty_ldisc_idle,
-			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+			atomic_read(&tty->ldisc->users) == 1, timeout);
 	if (ret < 0)
 		return ret;
 	return ret > 0 ? 0 : -EBUSY;
@@ -665,7 +667,7 @@
 
 	tty_ldisc_flush_works(tty);
 
-	retval = tty_ldisc_wait_idle(tty);
+	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
@@ -762,8 +764,6 @@
 	if (IS_ERR(ld))
 		return -1;
 
-	WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
 	tty->ldisc = NULL;
@@ -838,7 +838,7 @@
 	tty_unlock();
 	cancel_work_sync(&tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
-
+retry:
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
 
@@ -847,6 +847,22 @@
 	   it means auditing a lot of other paths so this is
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
+		if (atomic_read(&tty->ldisc->users) != 1) {
+			char cur_n[TASK_COMM_LEN], tty_n[64];
+			long timeout = 3 * HZ;
+			tty_unlock();
+
+			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+				timeout = MAX_SCHEDULE_TIMEOUT;
+				printk_ratelimited(KERN_WARNING
+					"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+					__func__, get_task_comm(cur_n, current),
+					tty_name(tty, tty_n));
+			}
+			mutex_unlock(&tty->ldisc_mutex);
+			goto retry;
+		}
+
 		if (reset == 0) {
 
 			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 66825c9..7a367ff 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/tty.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index bdc3db9..ff50595 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/uio_driver.h>
 #include <linux/stringify.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #define DRIVER_NAME "uio_pdrv"
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 0b2ed71..25de302 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -18,6 +18,7 @@
 #include <linux/uio_driver.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/stringify.h>
 #include <linux/pm_runtime.h>
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4ac2750..791f11b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -62,7 +62,6 @@
 	boolean
 	default y if FSL_SOC
 	default y if PPC_MPC512x
-	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
 	default y if ARCH_AT91SAM9G45
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 62050f7..57ae44c 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -38,6 +38,7 @@
 #include <linux/io.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/c67x00.h>
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6960715..e8c564a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -539,7 +539,6 @@
 {
 	int i;
 
-	mutex_lock(&open_mutex);
 	if (acm->dev) {
 		usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
@@ -551,14 +550,15 @@
 		acm->control->needs_remote_wakeup = 0;
 		usb_autopm_put_interface(acm->control);
 	}
-	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	tty_port_hangup(&acm->port);
+	mutex_lock(&open_mutex);
 	acm_port_down(acm);
+	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -569,8 +569,9 @@
 	   shutdown */
 	if (!acm)
 		return;
+
+	mutex_lock(&open_mutex);
 	if (tty_port_close_start(&acm->port, tty, filp) == 0) {
-		mutex_lock(&open_mutex);
 		if (!acm->dev) {
 			tty_port_tty_set(&acm->port, NULL);
 			acm_tty_unregister(acm);
@@ -582,6 +583,7 @@
 	acm_port_down(acm);
 	tty_port_close_end(&acm->port, tty);
 	tty_port_tty_set(&acm->port, NULL);
+	mutex_unlock(&open_mutex);
 }
 
 static int acm_tty_write(struct tty_struct *tty,
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3b029a0..45887a0 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -24,6 +24,7 @@
 
 #include <linux/device.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
 #include <linux/usb/hcd.h>
@@ -1667,6 +1668,11 @@
 		return -EAGAIN;
 
 	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+	/* Allow a retry if autosuspend failed temporarily */
+	if (status == -EAGAIN || status == -EBUSY)
+		usb_mark_last_busy(udev);
+
 	/* The PM core reacts badly unless the return code is 0,
 	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
 	 */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 96f05b2..7978146 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
 		}
 
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
 		 */
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
index 7542dce..7728c91 100644
--- a/drivers/usb/core/notify.c
+++ b/drivers/usb/core/notify.c
@@ -10,6 +10,7 @@
 
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/notifier.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d6a8d82..ecf12e1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,15 +50,42 @@
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index fa824cf..25dbd86 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1284,6 +1284,7 @@
 			int		ret;
 
 			dep->endpoint.maxpacket = 1024;
+			dep->endpoint.max_streams = 15;
 			dep->endpoint.ops = &dwc3_gadget_ep_ops;
 			list_add_tail(&dep->endpoint.ep_list,
 					&dwc->gadget.ep_list);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b21cd37..23a4473 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -469,7 +469,7 @@
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -485,10 +485,11 @@
 	  This driver dose not support interrupt transfer or isochronous
 	  transfer modes.
 
-	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
 	  for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
 config USB_CI13XXX_MSM
 	tristate "MIPS USB CI13xxx for MSM"
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 4730016..45f422a 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1959,7 +1959,7 @@
 	u32 tmp;
 
 	if (!driver || !bind || !driver->setup
-			|| driver->speed != USB_SPEED_HIGH)
+			|| driver->speed < USB_SPEED_HIGH)
 		return -EINVAL;
 	if (!dev)
 		return -ENODEV;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 672674c..725550f 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/utsname.h>
+#include <linux/module.h>
 
 #include "u_ether.h"
 #include "u_serial.h"
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 4eedfe5..1fc6129 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -122,3 +122,5 @@
 	return platform_driver_register(&ci13xxx_msm_driver);
 }
 module_init(ci13xxx_msm_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 83428f5..9a0c397 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -71,6 +71,9 @@
 /******************************************************************************
  * DEFINE
  *****************************************************************************/
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
@@ -1434,7 +1437,7 @@
 		return -EALREADY;
 
 	mReq->req.status = -EALREADY;
-	if (length && !mReq->req.dma) {
+	if (length && mReq->req.dma == DMA_ADDR_INVALID) {
 		mReq->req.dma = \
 			dma_map_single(mEp->device, mReq->req.buf,
 				       length, mEp->dir ? DMA_TO_DEVICE :
@@ -1453,7 +1456,7 @@
 				dma_unmap_single(mEp->device, mReq->req.dma,
 					length, mEp->dir ? DMA_TO_DEVICE :
 					DMA_FROM_DEVICE);
-				mReq->req.dma = 0;
+				mReq->req.dma = DMA_ADDR_INVALID;
 				mReq->map     = 0;
 			}
 			return -ENOMEM;
@@ -1549,7 +1552,7 @@
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 
@@ -1610,7 +1613,6 @@
  * @gadget: gadget
  *
  * This function returns an error code
- * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
@@ -2189,6 +2191,7 @@
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
+		mReq->req.dma = DMA_ADDR_INVALID;
 
 		mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
 					   &mReq->dma);
@@ -2328,7 +2331,7 @@
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 	req->status = -ECONNRESET;
@@ -2500,12 +2503,12 @@
 	spin_lock_irqsave(udc->lock, flags);
 	if (!udc->remote_wakeup) {
 		ret = -EOPNOTSUPP;
-		dbg_trace("remote wakeup feature is not enabled\n");
+		trace("remote wakeup feature is not enabled\n");
 		goto out;
 	}
 	if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
-		dbg_trace("port is not suspended\n");
+		trace("port is not suspended\n");
 		goto out;
 	}
 	hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
@@ -2703,7 +2706,9 @@
 		if (udc->udc_driver->notify_event)
 			udc->udc_driver->notify_event(udc,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
+		spin_unlock_irqrestore(udc->lock, flags);
 		_gadget_stop_activity(&udc->gadget);
+		spin_lock_irqsave(udc->lock, flags);
 		pm_runtime_put(&udc->gadget.dev);
 	}
 
@@ -2850,7 +2855,7 @@
 	struct ci13xxx *udc;
 	int retval = 0;
 
-	trace("%p, %p, %p", dev, regs, name);
+	trace("%p, %p, %p", dev, regs, driver->name);
 
 	if (dev == NULL || regs == NULL || driver == NULL ||
 			driver->name == NULL)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 8a5529d..f71b078 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -14,6 +14,7 @@
 #include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/utsname.h>
 
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index f855ecf..6256420 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -9,6 +9,7 @@
 /* verbose messages */
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 6b1c20b..acb3800 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -20,6 +20,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include <linux/usb/composite.h>
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 52583a2..c39d588 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -624,7 +624,8 @@
 		if (ctrl->bRequestType !=
 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 0)
 			return -EDOM;
 
 		/*
@@ -639,7 +640,8 @@
 		if (ctrl->bRequestType !=
 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 1)
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
 		*(u8 *)req->buf = fsg->common->nluns - 1;
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 67b2229..3797b3d 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -95,7 +95,6 @@
 
 DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
 DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
-DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16);
 DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
 
 /* B.3.1  Standard AC Interface Descriptor */
@@ -140,26 +139,6 @@
 	/* .wTotalLength =	DYNAMIC */
 };
 
-/* B.4.3  Embedded MIDI IN Jack Descriptor */
-static struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
-	.bLength =	      USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =      USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =   USB_MS_MIDI_IN_JACK,
-	.bJackType =	    USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-};
-
-/* B.4.4  Embedded MIDI OUT Jack Descriptor */
-static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = {
-	/* .bLength =		DYNAMIC */
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-	/* .bNrInputPins =	DYNAMIC */
-	/* .pins =		DYNAMIC */
-};
-
 /* B.5.1  Standard Bulk OUT Endpoint Descriptor */
 static struct usb_endpoint_descriptor bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
@@ -758,9 +737,11 @@
 static int __init
 f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 {
-	struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12];
+	struct usb_descriptor_header **midi_function;
 	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS];
 	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS];
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_midi *midi = func_to_midi(f);
 	int status, n, jack = 1, i = 0;
@@ -798,6 +779,14 @@
 		goto fail;
 	midi->out_ep->driver_data = cdev;	/* claim */
 
+	/* allocate temporary function list */
+	midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function),
+				GFP_KERNEL);
+	if (!midi_function) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
 	/*
 	 * construct the function's descriptor set. As the number of
 	 * input and output MIDI ports is configurable, we have to do
@@ -811,73 +800,74 @@
 
 	/* calculate the header's wTotalLength */
 	n = USB_DT_MS_HEADER_SIZE
-		+ (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE
-		+ (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1);
+		+ (midi->in_ports + midi->out_ports) *
+			(USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1));
 	ms_header_desc.wTotalLength = cpu_to_le16(n);
 
 	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
 
-	/* we have one embedded IN jack */
-	jack_in_emb_desc.bJackID = jack++;
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc;
-
-	/* and a dynamic amount of external IN jacks */
+	/* configure the external IN jacks, each linked to an embedded OUT jack */
 	for (n = 0; n < midi->in_ports; n++) {
-		struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n];
+		struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n];
 
-		ext->bLength =			USB_DT_MIDI_IN_SIZE;
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_IN_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->iJack =			0;
+		in_ext->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_ext->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_ext->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_ext->bJackType		= USB_MS_EXTERNAL;
+		in_ext->bJackID			= jack++;
+		in_ext->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_ext;
 
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
+		out_emb->bLength		= USB_DT_MIDI_OUT_SIZE(1);
+		out_emb->bDescriptorType	= USB_DT_CS_INTERFACE;
+		out_emb->bDescriptorSubtype	= USB_MS_MIDI_OUT_JACK;
+		out_emb->bJackType		= USB_MS_EMBEDDED;
+		out_emb->bJackID		= jack++;
+		out_emb->bNrInputPins		= 1;
+		out_emb->pins[0].baSourcePin	= 1;
+		out_emb->pins[0].baSourceID	= in_ext->bJackID;
+		out_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) out_emb;
+
+		/* link it to the endpoint */
+		ms_in_desc.baAssocJackID[n] = out_emb->bJackID;
 	}
 
-	/* one embedded OUT jack ... */
-	jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports);
-	jack_out_emb_desc.bJackID = jack++;
-	jack_out_emb_desc.bNrInputPins = midi->in_ports;
-	/* ... which referencess all external IN jacks */
-	for (n = 0; n < midi->in_ports; n++) {
-		jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID;
-		jack_out_emb_desc.pins[n].baSourcePin =	1;
-	}
-
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc;
-
-	/* and multiple external OUT jacks ... */
+	/* configure the external OUT jacks, each linked to an embedded IN jack */
 	for (n = 0; n < midi->out_ports; n++) {
-		struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n];
-		int m;
+		struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n];
 
-		ext->bLength =			USB_DT_MIDI_OUT_SIZE(1);
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->bNrInputPins =		1;
-		ext->iJack =			0;
-		/* ... which all reference the same embedded IN jack */
-		for (m = 0; m < midi->out_ports; m++) {
-			ext->pins[m].baSourceID =	jack_in_emb_desc.bJackID;
-			ext->pins[m].baSourcePin =	1;
-		}
+		in_emb->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_emb->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_emb->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_emb->bJackType		= USB_MS_EMBEDDED;
+		in_emb->bJackID			= jack++;
+		in_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_emb;
 
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
+		out_ext->bLength =		USB_DT_MIDI_OUT_SIZE(1);
+		out_ext->bDescriptorType =	USB_DT_CS_INTERFACE;
+		out_ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		out_ext->bJackType =		USB_MS_EXTERNAL;
+		out_ext->bJackID =		jack++;
+		out_ext->bNrInputPins =		1;
+		out_ext->iJack =		0;
+		out_ext->pins[0].baSourceID =	in_emb->bJackID;
+		out_ext->pins[0].baSourcePin =	1;
+		midi_function[i++] = (struct usb_descriptor_header *) out_ext;
+
+		/* link it to the endpoint */
+		ms_out_desc.baAssocJackID[n] = in_emb->bJackID;
 	}
 
 	/* configure the endpoint descriptors ... */
 	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
 	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
-	for (n = 0; n < midi->in_ports; n++)
-		ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID;
 
 	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
 	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
-	for (n = 0; n < midi->out_ports; n++)
-		ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID;
 
 	/* ... and add them to the list */
 	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
@@ -901,6 +891,8 @@
 		f->descriptors = usb_copy_descriptors(midi_function);
 	}
 
+	kfree(midi_function);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index e3f74bf..5f400f6 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 
 #include "u_serial.h"
 #include "gadget_chips.h"
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 3490770..16a509a 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -346,7 +346,7 @@
 		}
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
-				skb->len == 0, req->actual);
+				skb->len <= 1, req->actual);
 		page = NULL;
 
 		if (req->actual < req->length) { /* Last fragment */
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 91fdf79..cf33a8d 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -131,8 +131,8 @@
 	}
 	if (!gser->port.in->desc || !gser->port.out->desc) {
 		DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
-		if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
-		    !config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
+		if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
+		    config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
 			gser->port.in->desc = NULL;
 			gser->port.out->desc = NULL;
 			return -EINVAL;
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 168906d..7aa7ac8 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 
 #include "g_zero.h"
 #include "gadget_chips.h"
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 3ac4f51..11b5196 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -243,6 +243,7 @@
 #include <linux/kref.h>
 #include <linux/kthread.h>
 #include <linux/limits.h>
+#include <linux/module.h>
 #include <linux/rwsem.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -858,7 +859,7 @@
 			if (ctrl->bRequestType != (USB_DIR_OUT |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -874,7 +875,7 @@
 			if (ctrl->bRequestType != (USB_DIR_IN |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 1) {
 				value = -EDOM;
 				break;
 			}
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 43a49ec..dcbc0a2 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 
@@ -88,7 +89,6 @@
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-#if defined(CONFIG_SOC_IMX35)
 	if (cpu_is_mx35()) {
 		unsigned int v;
 
@@ -101,7 +101,6 @@
 					USBPHYCTRL_OTGBASE_OFFSET));
 		}
 	}
-#endif
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 2a03e4d..e00cf92 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2336,8 +2336,7 @@
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || (driver->speed != USB_SPEED_FULL
-			&& driver->speed != USB_SPEED_HIGH)
+	if (!driver || driver->speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b2c44e1..dd28ef3 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -696,12 +696,31 @@
 		kfree(req);
 }
 
-/*-------------------------------------------------------------------------*/
+/* Actually add a dTD chain to an empty dQH and let go */
+static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td)
+{
+	struct ep_queue_head *qh = get_qh_by_ep(ep);
+
+	/* Write dQH next pointer and terminate bit to 0 */
+	qh->next_dtd_ptr = cpu_to_hc32(td->td_dma
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK);
+
+	/* Clear active and halt bit */
+	qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
+					| EP_QUEUE_HEAD_STATUS_HALT));
+
+	/* Ensure that updates to the QH will occur before priming. */
+	wmb();
+
+	/* Prime endpoint by writing correct bit to ENDPTPRIME */
+	fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16))
+			: (1 << (ep_index(ep))), &dr_regs->endpointprime);
+}
+
+/* Add dTD chain to the dQH of an EP */
 static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 {
-	int i = ep_index(ep) * 2 + ep_is_in(ep);
 	u32 temp, bitmask, tmp_stat;
-	struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
 
 	/* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
 	VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
@@ -719,7 +738,7 @@
 			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
 		/* Read prime bit, if 1 goto done */
 		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
-			goto out;
+			return;
 
 		do {
 			/* Set ATDTW bit in USBCMD */
@@ -736,28 +755,10 @@
 		fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
 
 		if (tmp_stat)
-			goto out;
+			return;
 	}
 
-	/* Write dQH next pointer and terminate bit to 0 */
-	temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
-	dQH->next_dtd_ptr = cpu_to_hc32(temp);
-
-	/* Clear active and halt bit */
-	temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
-			| EP_QUEUE_HEAD_STATUS_HALT));
-	dQH->size_ioc_int_sts &= temp;
-
-	/* Ensure that updates to the QH will occur before priming. */
-	wmb();
-
-	/* Prime endpoint by writing 1 to ENDPTPRIME */
-	temp = ep_is_in(ep)
-		? (1 << (ep_index(ep) + 16))
-		: (1 << (ep_index(ep)));
-	fsl_writel(temp, &dr_regs->endpointprime);
-out:
-	return;
+	fsl_prime_ep(ep, req->head);
 }
 
 /* Fill in the dTD structure
@@ -877,7 +878,7 @@
 		VDBG("%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (usb_endpoint_xfer_isoc(ep->desc)) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
 	}
@@ -973,25 +974,20 @@
 
 		/* The request isn't the last request in this ep queue */
 		if (req->queue.next != &ep->queue) {
-			struct ep_queue_head *qh;
 			struct fsl_req *next_req;
 
-			qh = ep->qh;
 			next_req = list_entry(req->queue.next, struct fsl_req,
 					queue);
 
-			/* Point the QH to the first TD of next request */
-			fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
+			/* prime with dTD of next request */
+			fsl_prime_ep(ep, next_req->head);
 		}
-
-		/* The request hasn't been processed, patch up the TD chain */
+	/* The request hasn't been processed, patch up the TD chain */
 	} else {
 		struct fsl_req *prev_req;
 
 		prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
-		fsl_writel(fsl_readl(&req->tail->next_td_ptr),
-				&prev_req->tail->next_td_ptr);
-
+		prev_req->tail->next_td_ptr = req->tail->next_td_ptr;
 	}
 
 	done(ep, req, -ECONNRESET);
@@ -1032,7 +1028,7 @@
 		goto out;
 	}
 
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (usb_endpoint_xfer_isoc(ep->desc)) {
 		status = -EOPNOTSUPP;
 		goto out;
 	}
@@ -1068,7 +1064,7 @@
 	struct fsl_udc *udc;
 	int size = 0;
 	u32 bitmask;
-	struct ep_queue_head *d_qh;
+	struct ep_queue_head *qh;
 
 	ep = container_of(_ep, struct fsl_ep, ep);
 	if (!_ep || (!ep->desc && ep_index(ep) != 0))
@@ -1079,13 +1075,13 @@
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)];
+	qh = get_qh_by_ep(ep);
 
 	bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
 	    (1 << (ep_index(ep)));
 
 	if (fsl_readl(&dr_regs->endptstatus) & bitmask)
-		size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE)
+		size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE)
 		    >> DTD_LENGTH_BIT_POS;
 
 	pr_debug("%s %u\n", __func__, size);
@@ -1717,7 +1713,7 @@
 
 static inline enum usb_device_speed portscx_device_speed(u32 reg)
 {
-	switch (speed & PORTSCX_PORT_SPEED_MASK) {
+	switch (reg & PORTSCX_PORT_SPEED_MASK) {
 	case PORTSCX_PORT_SPEED_HIGH:
 		return USB_SPEED_HIGH;
 	case PORTSCX_PORT_SPEED_FULL:
@@ -1938,8 +1934,7 @@
 	if (!udc_controller)
 		return -ENODEV;
 
-	if (!driver || (driver->speed != USB_SPEED_FULL
-				&& driver->speed != USB_SPEED_HIGH)
+	if (!driver || driver->speed < USB_SPEED_FULL
 			|| !bind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
 
@@ -2480,8 +2475,7 @@
 
 #ifndef CONFIG_ARCH_MXC
 	if (pdata->have_sysif_regs)
-		usb_sys_regs = (struct usb_sys_interface *)
-				((u32)dr_regs + USB_DR_SYS_OFFSET);
+		usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
 #endif
 
 	/* Initialize USB clocks */
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 1d51be8..f781f5d 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -569,6 +569,16 @@
 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
 #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
 
+static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
+{
+	/* we only have one ep0 structure but two queue heads */
+	if (ep_index(ep) != 0)
+		return ep->qh;
+	else
+		return &ep->udc->ep_qh[(ep->udc->ep0_dir ==
+				USB_DIR_IN) ? 1 : 0];
+}
+
 struct platform_device;
 #ifdef CONFIG_ARCH_MXC
 int fsl_udc_clk_init(struct platform_device *pdev);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index e593f28..74da206 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 8fcde37a..681bd03 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/utsname.h>
+#include <linux/module.h>
 #include <linux/device.h>
 
 #include <sound/core.h>
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a392ec0..6ccae27 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1730,8 +1730,9 @@
 gadgetfs_disconnect (struct usb_gadget *gadget)
 {
 	struct dev_data		*dev = get_gadget_data (gadget);
+	unsigned long		flags;
 
-	spin_lock (&dev->lock);
+	spin_lock_irqsave (&dev->lock, flags);
 	if (dev->state == STATE_DEV_UNCONNECTED)
 		goto exit;
 	dev->state = STATE_DEV_UNCONNECTED;
@@ -1740,7 +1741,7 @@
 	next_event (dev, GADGETFS_DISCONNECT);
 	ep0_readable (dev);
 exit:
-	spin_unlock (&dev->lock);
+	spin_unlock_irqrestore (&dev->lock, flags);
 }
 
 static void
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 91d0af2..9aa1cbb 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1472,7 +1472,7 @@
 	int retval;
 
 	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
+			|| driver->speed < USB_SPEED_HIGH
 			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 7f1bc9a..da2b9d0 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1881,7 +1881,7 @@
 	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
 	 * "must not be used in normal operation"
 	 */
-	if (!driver || driver->speed != USB_SPEED_HIGH
+	if (!driver || driver->speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 550d6dc..5048a0c 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -354,6 +354,7 @@
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
 
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
@@ -2970,6 +2971,11 @@
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{ 0 },
 };
 
@@ -2999,5 +3005,5 @@
 module_exit(pch_udc_pci_exit);
 
 MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
-MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 68a826a..fc719a3 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1718,6 +1718,8 @@
 	if (list_empty(&ep->queue) && !ep->busy) {
 		pipe_stop(ep->r8a66597, ep->pipenum);
 		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+		r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr);
+		r8a66597_write(ep->r8a66597, 0, ep->pipectr);
 	}
 	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
 }
@@ -1742,26 +1744,16 @@
 		struct usb_gadget_driver *driver)
 {
 	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
-	int retval;
 
 	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
+			|| driver->speed < USB_SPEED_HIGH
 			|| !driver->setup)
 		return -EINVAL;
 	if (!r8a66597)
 		return -ENODEV;
 
 	/* hook up the driver */
-	driver->driver.bus = NULL;
 	r8a66597->driver = driver;
-	r8a66597->gadget.dev.driver = &driver->driver;
-
-	retval = device_add(&r8a66597->gadget.dev);
-	if (retval) {
-		dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n",
-			retval);
-		goto error;
-	}
 
 	init_controller(r8a66597);
 	r8a66597_bset(r8a66597, VBSE, INTENB0);
@@ -1775,12 +1767,6 @@
 	}
 
 	return 0;
-
-error:
-	r8a66597->driver = NULL;
-	r8a66597->gadget.dev.driver = NULL;
-
-	return retval;
 }
 
 static int r8a66597_stop(struct usb_gadget *gadget,
@@ -1794,7 +1780,6 @@
 	disable_controller(r8a66597);
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
-	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
 }
@@ -1845,6 +1830,7 @@
 		clk_put(r8a66597->clk);
 	}
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
 }
@@ -1924,13 +1910,17 @@
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	r8a66597->gadget.ops = &r8a66597_gadget_ops;
-	device_initialize(&r8a66597->gadget.dev);
 	dev_set_name(&r8a66597->gadget.dev, "gadget");
 	r8a66597->gadget.is_dualspeed = 1;
 	r8a66597->gadget.dev.parent = &pdev->dev;
 	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	r8a66597->gadget.dev.release = pdev->dev.release;
 	r8a66597->gadget.name = udc_name;
+	ret = device_register(&r8a66597->gadget.dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "device_register failed\n");
+		goto clean_up;
+	}
 
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
@@ -1945,7 +1935,7 @@
 			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
 				clk_name);
 			ret = PTR_ERR(r8a66597->clk);
-			goto clean_up;
+			goto clean_up_dev;
 		}
 		clk_enable(r8a66597->clk);
 	}
@@ -2014,7 +2004,9 @@
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
+clean_up_dev:
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
 		if (r8a66597->sudmac_reg)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a552453..b314482 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2586,10 +2586,8 @@
 		return -EINVAL;
 	}
 
-	if (driver->speed != USB_SPEED_HIGH &&
-	    driver->speed != USB_SPEED_FULL) {
+	if (driver->speed < USB_SPEED_FULL)
 		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
-	}
 
 	if (!bind || !driver->setup) {
 		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 8d54f89..20a553b 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1142,8 +1142,7 @@
 	int ret;
 
 	if (!driver
-		|| (driver->speed != USB_SPEED_FULL &&
-			driver->speed != USB_SPEED_HIGH)
+		|| driver->speed < USB_SPEED_FULL
 		|| !bind
 		|| !driver->unbind || !driver->disconnect || !driver->setup)
 		return -EINVAL;
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 3a4a664..6597a68 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -25,6 +25,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "u_serial.h"
 
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 022baec..6939e17 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -210,10 +210,10 @@
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	if (udc_is_newstyle(udc)) {
-		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
-
+		usb_gadget_disconnect(udc->gadget);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
 	}
@@ -344,7 +344,7 @@
 static ssize_t usb_udc_srp_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
-	struct usb_udc		*udc = dev_get_drvdata(dev);
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "1"))
 		usb_gadget_wakeup(udc->gadget);
@@ -378,7 +378,7 @@
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			usb_speed_string(udc->gadget->speed));
 }
-static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
+static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL);
 
 #define USB_UDC_ATTR(name)					\
 ssize_t usb_udc_##name##_show(struct device *dev,		\
@@ -389,7 +389,7 @@
 								\
 	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
 }								\
-static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL)
+static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL)
 
 static USB_UDC_ATTR(is_dualspeed);
 static USB_UDC_ATTR(is_otg);
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ed48a5d..7ca290f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,3 +36,4 @@
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
new file mode 100644
index 0000000..b4192c9
--- /dev/null
+++ b/drivers/usb/host/alchemy-common.c
@@ -0,0 +1,337 @@
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ *	    area. Au1550 has OHCI on different base address. No need to handle
+ *	    UDC here.
+ * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
+ *	    as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG	0x7fffc
+#define AU1550_OHCICFG	0x07ffc
+#define AU1200_USBCFG	0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
+#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
+#define USBHEN_E	(1 << 2)		/* OHCI block enable */
+#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
+#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
+#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
+#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
+#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
+#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
+#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
+#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
+#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
+#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
+#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
+#define USBCFG_GME	(1 << 6)		/* OTG mem access */
+#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
+#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
+#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
+#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
+#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
+#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
+#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
+				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
+				 USBCFG_OME)
+
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(2000);
+	} else {
+		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	} else {
+		if (!(r & USBCFG_UCE))		/* UDC also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+	} else {
+		if (!(r & USBCFG_ECE))		/* EHCI also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+		wmb();
+	}
+}
+
+static inline int au1200_coherency_bug(void)
+{
+#if defined(CONFIG_DMA_COHERENT)
+	/* Au1200 AB USB does not support coherent memory */
+	if (!(read_c0_prid() & 0xff)) {
+		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
+		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
+				 " the kernel\n");
+		return -ENODEV;
+	}
+#endif
+	return 0;
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ohci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1200_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ehci_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+out:
+	return ret;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+	wmb();
+	udelay(1000);
+}
+
+static inline void au1000_usb_init(unsigned long rb, int reg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+	unsigned long r = __raw_readl(base);
+
+#if defined(__BIG_ENDIAN)
+	r |= USBHEN_BE;
+#endif
+	r |= USBHEN_C;
+
+	__raw_writel(r, base);
+	wmb();
+	udelay(1000);
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+	unsigned long r = __raw_readl(base + creg);
+
+	if (enable) {
+		__raw_writel(r | USBHEN_CE, base + creg);
+		wmb();
+		udelay(1000);
+		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+		wmb();
+		udelay(1000);
+
+		/* wait for reset complete (read reg twice: au1500 erratum) */
+		while (__raw_readl(base + creg),
+			!(__raw_readl(base + creg) & USBHEN_RD))
+			udelay(1000);
+	} else {
+		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+		wmb();
+	}
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+				     int creg)
+{
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1xx0_ohci_control(enable, rb, creg);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block:	USB block to target
+ * @enable:	set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&alchemy_usb_lock, flags);
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_control(block, enable,
+				AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_control(block, enable,
+				AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		ret = au1200_usb_control(block, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+		/* There appears to be some undocumented reset register.... */
+		__raw_writel(0, base + 0x04);
+		wmb();
+		__raw_writel(0, base + creg);
+		wmb();
+	} else {
+		__raw_writel(alchemy_usb_pmdata[0], base + creg);
+		wmb();
+	}
+}
+
+static void au1200_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+	if (susp) {
+		/* save OTG_CAP/MUX registers which indicate port routing */
+		/* FIXME: write an OTG driver to do that */
+		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+	} else {
+		/* restore access to all MMIO areas */
+		au1200_usb_init();
+
+		/* restore OTG_CAP/MUX registers */
+		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+		wmb();
+	}
+}
+
+static void alchemy_usb_pm(int susp)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_pm(susp);
+		break;
+	}
+}
+
+static int alchemy_usb_suspend(void)
+{
+	alchemy_usb_pm(1);
+	return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+	alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+	.suspend	= alchemy_usb_suspend,
+	.resume		= alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_init();
+		break;
+	}
+
+	register_syscore_ops(&alchemy_usb_pm_ops);
+
+	return 0;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 65719e8..18bafa9 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -14,61 +14,9 @@
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#define USB_HOST_CONFIG   (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_PHYPLLEN (1<<19)
-#define USB_MCFG_UCECLKEN (1<<18)
-#define USB_MCFG_EHCCLKEN (1<<17)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_EBMEN    (1<<3)
-#define USB_MCFG_EMEMEN   (1<<2)
-
-#define USBH_ENABLE_CE	(USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN  | USB_MCFG_RDCOMB |	\
-			  USBH_ENABLE_CE | USB_MCFG_SSDEN  |	\
-			  USB_MCFG_UCAM  | USB_MCFG_EBMEN  |	\
-			  USB_MCFG_EMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ehc(void)
-{
-	/* enable clock to EHCI block and HS PHY PLL*/
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* enable EHCI mmio */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-}
-
-static void au1xxx_stop_ehc(void)
-{
-	unsigned long c;
-
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* Disable EHC clock. If the HS PHY is unused disable it too. */
-	c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
-	if (!(c & USB_MCFG_UCECLKEN))		/* UDC disabled? */
-		c &= ~USB_MCFG_PHYPLLEN;	/* yes: disable HS PHY PLL */
-	au_writel(c, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int au1xxx_ehci_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -136,16 +84,6 @@
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure"
-				 " the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
@@ -171,7 +109,11 @@
 		goto err2;
 	}
 
-	au1xxx_start_ehc();
+	if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = hcd->regs;
@@ -187,7 +129,8 @@
 		return ret;
 	}
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -201,10 +144,10 @@
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	au1xxx_stop_ehc();
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -236,7 +179,7 @@
 	// could save FLADJ in case of Vaux power loss
 	// ... we'd only use it to handle clock skew
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 
 	return rc;
 }
@@ -246,7 +189,7 @@
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-	au1xxx_start_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
 
 	// maybe restore FLADJ
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 59e8161..3ff9f82 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1224,7 +1224,7 @@
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
 #endif
 
-#ifdef CONFIG_SOC_AU1200
+#ifdef CONFIG_MIPS_ALCHEMY
 #include "ehci-au1xxx.c"
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2e829fa..a60679c 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1475,30 +1475,36 @@
 	 * jump until after the queue is primed.
 	 */
 	else {
+		int done = 0;
 		start = SCHEDULE_SLOP + (now & ~0x07);
 
 		/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
 
-		/* find a uframe slot with enough bandwidth */
-		next = start + period;
-		for (; start < next; start++) {
-
+		/* find a uframe slot with enough bandwidth.
+		 * Early uframes are more precious because full-speed
+		 * iso IN transfers can't use late uframes,
+		 * and therefore they should be allocated last.
+		 */
+		next = start;
+		start += period;
+		do {
+			start--;
 			/* check schedule: enough space? */
 			if (stream->highspeed) {
 				if (itd_slot_ok(ehci, mod, start,
 						stream->usecs, period))
-					break;
+					done = 1;
 			} else {
 				if ((start % 8) >= 6)
 					continue;
 				if (sitd_slot_ok(ehci, mod, stream,
 						start, sched, period))
-					break;
+					done = 1;
 			}
-		}
+		} while (start > next && !done);
 
 		/* no room in the schedule */
-		if (start == next) {
+		if (!done) {
 			ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n",
 				urb, now, now + mod);
 			status = -ENOSPC;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
index fe74bd6..b4fb511 100644
--- a/drivers/usb/host/ehci-xls.c
+++ b/drivers/usb/host/ehci-xls.c
@@ -19,7 +19,7 @@
 
 	ehci->caps = hcd->regs;
 	ehci->regs = hcd->regs +
-		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 79a66d6..9037035 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 
 struct fsl_usb2_dev_data {
 	char *dr_mode;		/* controller mode */
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 2c7fc83..a7dc1e1 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -11,6 +11,7 @@
 
 #include <linux/usb.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/usb/isp1760.h>
 #include <linux/usb/hcd.h>
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index ba3a46b..95a9fec 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,6 +223,9 @@
 	if (port < 0 || port >= 2)
 		return;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return;
+
 	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
 }
 
@@ -231,6 +234,9 @@
 	if (port < 0 || port >= 2)
 		return -EINVAL;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return -EINVAL;
+
 	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
 }
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 6b7bc50..9b66df8 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -23,92 +23,9 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-#ifndef	CONFIG_SOC_AU1200
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C  (1<<1)
-#define USBH_ENABLE_E  (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif defined(__BIG_ENDIAN)
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
-			  USBH_ENABLE_BE)
-#else
-#error not byte order defined
-#endif
-
-#else   /* Au1200 */
-
-#define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_OHCCLKEN (1<<16)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_OBMEN    (1<<1)
-#define USB_MCFG_OMEMEN   (1<<0)
-
-#define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
-
-#define USBH_ENABLE_INIT  (USB_MCFG_PFEN  | USB_MCFG_RDCOMB 	|	\
-			   USBH_ENABLE_CE | USB_MCFG_SSDEN	|	\
-			   USB_MCFG_UCAM  |				\
-			   USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#endif  /* Au1200 */
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ohc(void)
-{
-	/* enable host controller */
-#ifndef CONFIG_SOC_AU1200
-	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* wait for reset complete (read register twice; see au1500 errata) */
-	while (au_readl(USB_HOST_CONFIG),
-		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
-		udelay(1000);
-
-#else   /* Au1200 */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(2000);
-#endif  /* Au1200 */
-}
-
-static void au1xxx_stop_ohc(void)
-{
-#ifdef CONFIG_SOC_AU1200
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-#endif
-	/* Disable clock */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
@@ -178,17 +95,6 @@
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB !!\n",
-			pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure "
-				 "the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ\n");
 		return -ENOMEM;
@@ -214,7 +120,12 @@
 		goto err2;
 	}
 
-	au1xxx_start_ohc();
+	if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
+
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
@@ -224,7 +135,8 @@
 		return ret;
 	}
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -238,7 +150,7 @@
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
@@ -275,7 +187,7 @@
 
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 bail:
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
@@ -286,7 +198,7 @@
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
-	au1xxx_start_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	ohci_finish_controller_resume(hcd);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34efd47..b263919 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -389,17 +389,14 @@
 	struct ohci_hcd *ohci;
 
 	ohci = hcd_to_ohci (hcd);
-	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
 
-	/* If the SHUTDOWN quirk is set, don't put the controller in RESET */
-	ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
-			OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
-			OHCI_CTRL_RWC);
-	ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+	/* Software reset, after which the controller goes into SUSPEND */
+	ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+	ohci_readl(ohci, &ohci->regs->cmdstatus);	/* flush the writes */
+	udelay(10);
 
-	/* flush the writes */
-	(void) ohci_readl (ohci, &ohci->regs->control);
+	ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
 }
 
 static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c..bc01b06 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@
 	return 0;
 }
 
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power.  This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
-	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-
-	/* Evidently nVidia fixed their later hardware; this is a guess at
-	 * the changeover point.
-	 */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB		0x026d
-
-	if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
-		ohci->flags |= OHCI_QUIRK_SHUTDOWN;
-		ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
-	}
-
-	return 0;
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
@@ -260,10 +238,6 @@
 		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 		.driver_data = (unsigned long)ohci_quirk_amd700,
 	},
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
-		.driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
-	},
 
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 35e5fd6..0795b93 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -403,7 +403,6 @@
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
-#define	OHCI_QUIRK_SHUTDOWN	0x800			/* nVidia power bug */
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 629a968..caf8742 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -13,6 +13,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
 #include "pci-quirks.h"
@@ -36,6 +37,7 @@
 #define OHCI_INTRENABLE		0x10
 #define OHCI_INTRDISABLE	0x14
 #define OHCI_FMINTERVAL		0x34
+#define OHCI_HCFS		(3 << 6)	/* hc functional state */
 #define OHCI_HCR		(1 << 0)	/* host controller reset */
 #define OHCI_OCR		(1 << 3)	/* ownership change request */
 #define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
@@ -465,6 +467,8 @@
 {
 	void __iomem *base;
 	u32 control;
+	u32 fminterval;
+	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -497,41 +501,32 @@
 	}
 #endif
 
-	/* reset controller, preserving RWC (and possibly IR) */
-	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
-	readl(base + OHCI_CONTROL);
+	/* disable interrupts */
+	writel((u32) ~0, base + OHCI_INTRDISABLE);
 
-	/* Some NVIDIA controllers stop working if kept in RESET for too long */
-	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
-		u32 fminterval;
-		int cnt;
+	/* Reset the USB bus, if the controller isn't already in RESET */
+	if (control & OHCI_HCFS) {
+		/* Go into RESET, preserving RWC (and possibly IR) */
+		writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+		readl(base + OHCI_CONTROL);
 
-		/* drive reset for at least 50 ms (7.1.7.5) */
+		/* drive bus reset for at least 50 ms (7.1.7.5) */
 		msleep(50);
-
-		/* software reset of the controller, preserving HcFmInterval */
-		fminterval = readl(base + OHCI_FMINTERVAL);
-		writel(OHCI_HCR, base + OHCI_CMDSTATUS);
-
-		/* reset requires max 10 us delay */
-		for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
-			if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
-				break;
-			udelay(1);
-		}
-		writel(fminterval, base + OHCI_FMINTERVAL);
-
-		/* Now we're in the SUSPEND state with all devices reset
-		 * and wakeups and interrupts disabled
-		 */
 	}
 
-	/*
-	 * disable interrupts
-	 */
-	writel(~(u32)0, base + OHCI_INTRDISABLE);
-	writel(~(u32)0, base + OHCI_INTRSTATUS);
+	/* software reset of the controller, preserving HcFmInterval */
+	fminterval = readl(base + OHCI_FMINTERVAL);
+	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
+	/* reset requires max 10 us delay */
+	for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+		if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+			break;
+		udelay(1);
+	}
+	writel(fminterval, base + OHCI_FMINTERVAL);
+
+	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
 }
 
@@ -626,7 +621,7 @@
 	void __iomem *base, *op_reg_base;
 	u32	hcc_params, cap, val;
 	u8	offset, cap_length;
-	int	wait_time, delta, count = 256/4;
+	int	wait_time, count = 256/4;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -672,11 +667,10 @@
 		writel(val, op_reg_base + EHCI_USBCMD);
 
 		wait_time = 2000;
-		delta = 100;
 		do {
 			writel(0x3f, op_reg_base + EHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
+			udelay(100);
+			wait_time -= 100;
 			val = readl(op_reg_base + EHCI_USBSTS);
 			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
 				break;
diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c
index 767af26..ba61dae 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/usb/host/whci/debug.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 #include "../../wusbcore/wusbhc.h"
 
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 9546f6c..1e141f7 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -17,6 +17,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/uwb/umc.h>
 
 #include "../../wusbcore/wusbhc.h"
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index d6e1754..a403b53 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -124,7 +124,7 @@
 {
 	qset->td_start = qset->td_end = qset->ntds = 0;
 
-	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
+	qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
 	qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
 	qset->qh.err_count = 0;
 	qset->qh.scratch[0] = 0;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 431efe7..430e88f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -20,6 +20,7 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gfp.h>
 #include <asm/unaligned.h>
 
 #include "xhci.h"
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 42a22b8..0e4b25f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -982,7 +982,6 @@
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	struct xhci_input_control_ctx *ctrl_ctx;
 	u32			port_num;
 	struct usb_device *top_dev;
 
@@ -994,12 +993,8 @@
 		return -EINVAL;
 	}
 	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
-	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9f51f88..ef98b38 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -22,6 +22,7 @@
 
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "xhci.h"
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 940321b..9f1d4b1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -816,23 +816,24 @@
 	struct xhci_ring *ring;
 	struct xhci_td *cur_td;
 	int ret, i, j;
+	unsigned long flags;
 
 	ep = (struct xhci_virt_ep *) arg;
 	xhci = ep->xhci;
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 
 	ep->stop_cmds_pending--;
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
 		xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 				"xHCI as DYING, exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 	if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 		xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 				"exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
@@ -844,11 +845,11 @@
 	xhci->xhc_state |= XHCI_STATE_DYING;
 	/* Disable interrupts from the host controller and start halting it */
 	xhci_quiesce(xhci);
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	ret = xhci_halt(xhci);
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
@@ -896,7 +897,7 @@
 			}
 		}
 	}
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
 	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1ff95a0..a1afb7c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -711,7 +711,10 @@
 	ring = xhci->cmd_ring;
 	seg = ring->deq_seg;
 	do {
-		memset(seg->trbs, 0, SEGMENT_SIZE);
+		memset(seg->trbs, 0,
+			sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1));
+		seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+			cpu_to_le32(~TRB_CYCLE);
 		seg = seg->next;
 	} while (seg != ring->deq_seg);
 
@@ -799,7 +802,7 @@
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
-	int			retval;
+	int			retval = 0;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -809,6 +812,9 @@
 				xhci->bus_state[1].next_statechange))
 		msleep(100);
 
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
 	spin_lock_irq(&xhci->lock);
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		hibernated = true;
@@ -878,20 +884,13 @@
 			return retval;
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
-		if (retval)
-			goto failed_restart;
-
-		xhci_dbg(xhci, "Start the secondary HCD\n");
-		retval = xhci_run(secondary_hcd);
 		if (!retval) {
-			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-			set_bit(HCD_FLAG_HW_ACCESSIBLE,
-					&xhci->shared_hcd->flags);
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(secondary_hcd);
 		}
-failed_restart:
 		hcd->state = HC_STATE_SUSPENDED;
 		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
-		return retval;
+		goto done;
 	}
 
 	/* step 4: set Run/Stop bit */
@@ -910,11 +909,14 @@
 	 * Running endpoints by ringing their doorbells
 	 */
 
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
-
 	spin_unlock_irq(&xhci->lock);
-	return 0;
+
+ done:
+	if (retval == 0) {
+		usb_hcd_resume_root_hub(hcd);
+		usb_hcd_resume_root_hub(xhci->shared_hcd);
+	}
+	return retval;
 }
 #endif	/* CONFIG_PM */
 
@@ -3504,6 +3506,10 @@
 	/* Otherwise, update the control endpoint ring enqueue pointer. */
 	else
 		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
@@ -3585,7 +3591,6 @@
 	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
 		+ 1;
 	/* Zero the input context control for later use */
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;
 
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 43f84e5..7ab97ee 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -31,6 +31,8 @@
 			.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
 	{ USB_DEVICE(0x1d34, 0x0004),
 			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
+	{ USB_DEVICE(0x1d34, 0x000a),
+			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index a04b2ff..91cd850 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/fs.h>
 #include <linux/cdev.h>
+#include <linux/export.h>
 #include <linux/usb.h>
 #include <linux/poll.h>
 #include <linux/compat.h>
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
index e5ce42b..ebd6189 100644
--- a/drivers/usb/mon/mon_stat.c
+++ b/drivers/usb/mon/mon_stat.c
@@ -9,6 +9,7 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/usb.h>
 #include <linux/fs.h>
 #include <asm/uaccess.h>
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 1c3afcc..ad40825 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -9,6 +9,7 @@
 #include <linux/usb.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/debugfs.h>
 #include <linux/scatterlist.h>
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index fc34b8b..07a0346 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
+	select USB_GADGET_DUALSPEED
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -60,7 +61,7 @@
 
 config USB_MUSB_UX500
 	tristate "U8500 and U5500"
-	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+	depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 08f1d0b6..e233d2b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 4da7492..2613bfd 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 20a2873..b63ab15 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1477,8 +1477,7 @@
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
-	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
-	defined(CONFIG_ARCH_U5500)
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
@@ -2302,18 +2301,12 @@
 		 */
 	}
 
-	musb_save_context(musb);
-
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
 
 static int musb_resume_noirq(struct device *dev)
 {
-	struct musb	*musb = dev_to_musb(dev);
-
-	musb_restore_context(musb);
-
 	/* for static cmos like DaVinci, register values were preserved
 	 * unless for some reason the whole soc powered down or the USB
 	 * module got reset through the PSC (vs just being disabled).
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ae4a20a..922148f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1903,7 +1903,7 @@
 	unsigned long		flags;
 	int			retval = -EINVAL;
 
-	if (driver->speed != USB_SPEED_HIGH)
+	if (driver->speed < USB_SPEED_HIGH)
 		goto err0;
 
 	pm_runtime_get_sync(musb->controller);
@@ -1999,10 +1999,6 @@
 					nuke(&hw_ep->ep_out, -ESHUTDOWN);
 			}
 		}
-
-		spin_unlock(&musb->lock);
-		driver->disconnect(&musb->g);
-		spin_lock(&musb->lock);
 	}
 }
 
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 52733d9..fb644c1 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index fb7adef..307c27b 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/device.h>
 
 #include <linux/usb/otg.h>
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 770d799..0b04667 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index d2e2efa..08c679c 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -405,7 +405,7 @@
 /*
  *		platform functions
  */
-static int __devinit usbhs_probe(struct platform_device *pdev)
+static int usbhs_probe(struct platform_device *pdev)
 {
 	struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
 	struct renesas_usbhs_driver_callback *dfunc;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 8da685e..ffdf5d1 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -820,7 +820,7 @@
 	if (len % 4) /* 32bit alignment */
 		goto usbhsf_pio_prepare_push;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_push;
 
 	/* get enable DMA fifo */
@@ -897,7 +897,7 @@
 	if (!fifo)
 		goto usbhsf_pio_prepare_pop;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_pop;
 
 	ret = usbhsf_fifo_select(pipe, fifo, 0);
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 8ae3733..6c68755 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -143,8 +143,8 @@
  */
 #if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
 	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
-extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv);
-extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int usbhs_mod_host_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
@@ -157,8 +157,8 @@
 
 #if	defined(CONFIG_USB_RENESAS_USBHS_UDC) || \
 	defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE)
-extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv);
-extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv);
+extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 4cc7ee0..7f4e803 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -751,53 +751,32 @@
 		struct usb_gadget_driver *driver)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
-	struct usbhs_priv *priv;
-	struct device *dev;
-	int ret;
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
 	if (!driver		||
 	    !driver->setup	||
-	    driver->speed != USB_SPEED_HIGH)
+	    driver->speed < USB_SPEED_FULL)
 		return -EINVAL;
 
-	dev  = usbhsg_gpriv_to_dev(gpriv);
-	priv = usbhsg_gpriv_to_priv(gpriv);
-
 	/* first hook up the driver ... */
 	gpriv->driver = driver;
 	gpriv->gadget.dev.driver = &driver->driver;
 
-	ret = device_add(&gpriv->gadget.dev);
-	if (ret) {
-		dev_err(dev, "device_add error %d\n", ret);
-		goto add_fail;
-	}
-
 	return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD);
-
-add_fail:
-	gpriv->driver = NULL;
-	gpriv->gadget.dev.driver = NULL;
-
-	return ret;
 }
 
 static int usbhsg_gadget_stop(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
-	struct usbhs_priv *priv;
-	struct device *dev;
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
 	if (!driver		||
 	    !driver->unbind)
 		return -EINVAL;
 
-	dev  = usbhsg_gpriv_to_dev(gpriv);
-	priv = usbhsg_gpriv_to_priv(gpriv);
-
 	usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
-	device_del(&gpriv->gadget.dev);
+	gpriv->gadget.dev.driver = NULL;
 	gpriv->driver = NULL;
 
 	return 0;
@@ -827,10 +806,17 @@
 
 static int usbhsg_stop(struct usbhs_priv *priv)
 {
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	/* cable disconnect */
+	if (gpriv->driver &&
+	    gpriv->driver->disconnect)
+		gpriv->driver->disconnect(&gpriv->gadget);
+
 	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
-int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv;
 	struct usbhsg_uep *uep;
@@ -876,12 +862,14 @@
 	/*
 	 * init gadget
 	 */
-	device_initialize(&gpriv->gadget.dev);
 	dev_set_name(&gpriv->gadget.dev, "gadget");
 	gpriv->gadget.dev.parent	= dev;
 	gpriv->gadget.name		= "renesas_usbhs_udc";
 	gpriv->gadget.ops		= &usbhsg_gadget_ops;
 	gpriv->gadget.is_dualspeed	= 1;
+	ret = device_register(&gpriv->gadget.dev);
+	if (ret < 0)
+		goto err_add_udc;
 
 	INIT_LIST_HEAD(&gpriv->gadget.ep_list);
 
@@ -912,12 +900,15 @@
 
 	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
 	if (ret)
-		goto err_add_udc;
+		goto err_register;
 
 
 	dev_info(dev, "gadget probed\n");
 
 	return 0;
+
+err_register:
+	device_unregister(&gpriv->gadget.dev);
 err_add_udc:
 	kfree(gpriv->uep);
 
@@ -927,12 +918,14 @@
 	return ret;
 }
 
-void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 
 	usb_del_gadget_udc(&gpriv->gadget);
 
+	device_unregister(&gpriv->gadget.dev);
+
 	usbhsg_controller_unregister(gpriv);
 
 	kfree(gpriv->uep);
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 1a7208a..bade761 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -103,7 +103,7 @@
 
 	u32	port_stat;	/* USB_PORT_STAT_xxx */
 
-	struct completion	*done;
+	struct completion	setup_ack_done;
 
 	/* see usbhsh_req_alloc/free */
 	struct list_head	ureq_link_active;
@@ -355,6 +355,7 @@
 struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 					struct usbhsh_device *udev,
 					struct usb_host_endpoint *ep,
+					int dir_in_req,
 					gfp_t mem_flags)
 {
 	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
@@ -364,27 +365,38 @@
 	struct usbhs_pipe *pipe, *best_pipe;
 	struct device *dev = usbhsh_hcd_to_dev(hcd);
 	struct usb_endpoint_descriptor *desc = &ep->desc;
-	int type, i;
+	int type, i, dir_in;
 	unsigned int min_usr;
 
+	dir_in_req = !!dir_in_req;
+
 	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
 	if (!uep) {
 		dev_err(dev, "usbhsh_ep alloc fail\n");
 		return NULL;
 	}
-	type = usb_endpoint_type(desc);
+
+	if (usb_endpoint_xfer_control(desc)) {
+		best_pipe = usbhsh_hpriv_to_dcp(hpriv);
+		goto usbhsh_endpoint_alloc_find_pipe;
+	}
 
 	/*
 	 * find best pipe for endpoint
 	 * see
 	 *	HARDWARE LIMITATION
 	 */
+	type = usb_endpoint_type(desc);
 	min_usr = ~0;
 	best_pipe = NULL;
-	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+	usbhs_for_each_pipe(pipe, priv, i) {
 		if (!usbhs_pipe_type_is(pipe, type))
 			continue;
 
+		dir_in = !!usbhs_pipe_is_dir_in(pipe);
+		if (0 != (dir_in - dir_in_req))
+			continue;
+
 		info = usbhsh_pipe_info(pipe);
 
 		if (min_usr > info->usr_cnt) {
@@ -398,7 +410,7 @@
 		kfree(uep);
 		return NULL;
 	}
-
+usbhsh_endpoint_alloc_find_pipe:
 	/*
 	 * init uep
 	 */
@@ -423,6 +435,7 @@
 	 * see
 	 *  DCPMAXP/PIPEMAXP
 	 */
+	usbhs_pipe_sequence_data0(uep->pipe);
 	usbhs_pipe_config_update(uep->pipe,
 				 usbhsh_device_number(hpriv, udev),
 				 usb_endpoint_num(desc),
@@ -430,7 +443,7 @@
 
 	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
 		usbhsh_device_number(hpriv, udev),
-		usbhs_pipe_name(pipe), uep);
+		usbhs_pipe_name(uep->pipe), uep);
 
 	return uep;
 }
@@ -549,8 +562,7 @@
 	 *	usbhsh_irq_setup_ack()
 	 *	usbhsh_irq_setup_err()
 	 */
-	DECLARE_COMPLETION(done);
-	hpriv->done = &done;
+	init_completion(&hpriv->setup_ack_done);
 
 	/* copy original request */
 	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
@@ -572,8 +584,7 @@
 	/*
 	 * wait setup packet ACK
 	 */
-	wait_for_completion(&done);
-	hpriv->done = NULL;
+	wait_for_completion(&hpriv->setup_ack_done);
 
 	dev_dbg(dev, "%s done\n", __func__);
 }
@@ -724,11 +735,11 @@
 	struct usbhsh_device *udev, *new_udev = NULL;
 	struct usbhs_pipe *pipe;
 	struct usbhsh_ep *uep;
+	int is_dir_in = usb_pipein(urb->pipe);
 
 	int ret;
 
-	dev_dbg(dev, "%s (%s)\n",
-		__func__, usb_pipein(urb->pipe) ? "in" : "out");
+	dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
 
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (ret)
@@ -751,7 +762,8 @@
 	 */
 	uep = usbhsh_ep_to_uep(ep);
 	if (!uep) {
-		uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags);
+		uep = usbhsh_endpoint_alloc(hpriv, udev, ep,
+					    is_dir_in, mem_flags);
 		if (!uep)
 			goto usbhsh_urb_enqueue_error_free_device;
 	}
@@ -1095,10 +1107,7 @@
 
 	dev_dbg(dev, "setup packet OK\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup ack happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1111,10 +1120,7 @@
 
 	dev_dbg(dev, "setup packet Err\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup err happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1221,8 +1227,18 @@
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
 
+	/*
+	 * disable irq callback
+	 */
+	mod->irq_attch	= NULL;
+	mod->irq_dtch	= NULL;
+	mod->irq_sack	= NULL;
+	mod->irq_sign	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
 	usb_remove_hcd(hcd);
 
 	/* disable sys */
@@ -1235,7 +1251,7 @@
 	return 0;
 }
 
-int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
+int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv;
 	struct usb_hcd *hcd;
@@ -1279,7 +1295,6 @@
 	hpriv->mod.stop		= usbhsh_stop;
 	hpriv->pipe_info	= pipe_info;
 	hpriv->pipe_size	= pipe_size;
-	hpriv->done		= NULL;
 	usbhsh_req_list_init(hpriv);
 	usbhsh_port_stat_init(hpriv);
 
@@ -1299,7 +1314,7 @@
 	return -ENOMEM;
 }
 
-int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv)
+int usbhs_mod_host_remove(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index aba201c..b43d07d 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -47,6 +47,7 @@
 #include <asm/unaligned.h>
 #include <linux/tty.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/tty_flip.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d9..18e875b 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@
  * Version information
  */
 
-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@
 		goto err_out;
 	}
 
-	/* setup termios */
-	if (tty)
-		ark3116_set_termios(tty, port, NULL);
-
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
@@ -406,6 +402,10 @@
 	/* enable DMA */
 	ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
 
+	/* setup termios */
+	if (tty)
+		ark3116_set_termios(tty, port, NULL);
+
 err_out:
 	kfree(buf);
 	return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fe034d..ff3db5d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -736,6 +736,7 @@
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
@@ -2104,13 +2105,19 @@
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	urb_value = 0;
@@ -2151,6 +2158,7 @@
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2178,6 +2186,7 @@
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 571fa96..055b64e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -112,6 +112,7 @@
 
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
+#define FTDI_PROPOX_ISPCABLEIII_PID	0xD739
 
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f6..e342660 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@
 #define HUAWEI_PRODUCT_K4511			0x14CC
 #define HUAWEI_PRODUCT_ETS1220			0x1803
 #define HUAWEI_PRODUCT_E353			0x1506
+#define HUAWEI_PRODUCT_E173S			0x1C05
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -316,6 +317,9 @@
 #define ZTE_PRODUCT_AC8710			0xfff1
 #define ZTE_PRODUCT_AC2726			0xfff5
 #define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -468,6 +472,10 @@
 #define YUGA_PRODUCT_CLU528			0x260D
 #define YUGA_PRODUCT_CLU526			0x260F
 
+/* Viettel products */
+#define VIETTEL_VENDOR_ID			0x2262
+#define VIETTEL_PRODUCT_VT1000			0x0002
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -500,6 +508,18 @@
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -622,6 +642,7 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -640,6 +661,9 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
@@ -726,6 +750,7 @@
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
@@ -1043,6 +1068,12 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -1141,6 +1172,7 @@
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9083d1e..fc2d66f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f..c38b8c0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index b9bb247..aa9367f 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -13,6 +13,7 @@
 
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/slab.h>
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 4dca3ef..9fbe742 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1762,10 +1762,9 @@
 		result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
 	} else {
 		void *buf;
-		int offset;
+		int offset = 0;
 		u16 PhyBlockAddr;
 		u8 PageNum;
-		u32 result;
 		u16 len, oldphy, newphy;
 
 		buf = kmalloc(blenByte, GFP_KERNEL);
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index 8946018..e0f76bb 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -22,6 +22,7 @@
 
 #include <linux/usb.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "usb.h"
 #include "transport.h"
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index fc310f7..82dd834 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -43,6 +43,7 @@
  */
 
 #include <linux/highmem.h>
+#include <linux/export.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 
@@ -58,7 +59,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available
@@ -66,9 +69,6 @@
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 1deca07..37539c8 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -3,6 +3,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <linux/usb.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include "usb.h"
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index ff32390..0e5c91c 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -46,6 +46,7 @@
 #include <linux/sched.h>
 #include <linux/gfp.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 
 #include <linux/usb/quirks.h>
 
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 23f0dd9..1d10d5b 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -11,6 +11,7 @@
 #include <linux/blkdev.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/storage.h>
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 3041a97..24caba7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1854,6 +1854,13 @@
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Qinglin Ye <yestyle@gmail.com> */
+UNUSUAL_DEV(  0x13fe, 0x3600, 0x0100, 0x0100,
+		"Kingston",
+		"DT 101 G2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG ),
+
 /* Reported by Francesco Foresti <frafore@tiscali.it> */
 UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
 		"Super Top",
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 7ec24e4..231009a 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -90,6 +90,7 @@
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/export.h>
 #include "wusbhc.h"
 
 static void wusbhc_devconnect_acked_work(struct work_struct *work);
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
index 0a57ff0..b8c7258 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/usb/wusbcore/mmc.c
@@ -38,6 +38,7 @@
  */
 #include <linux/usb/wusb.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "wusbhc.h"
 
 /* Initialize the MMCIEs handling mechanism */
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index 39de390..59ff254 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -70,6 +70,7 @@
  * wusbhc_rh_start_port_reset() ??? unimplemented
  */
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "wusbhc.h"
 
 /*
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index b60799b..371f617 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/usb/ch9.h>
 #include <linux/random.h>
+#include <linux/export.h>
 #include "wusbhc.h"
 
 static void wusbhc_set_gtk_callback(struct urb *urb);
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index 0d1863c..9e4a924 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -23,6 +23,7 @@
  * FIXME: docs
  */
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "wusbhc.h"
 #include "wa-hc.h"
 
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 2acc7f5..f0d546c 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -61,6 +61,7 @@
 #include <linux/atomic.h>
 #include <linux/bitmap.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "wusbhc.h"
 #include "wa-hc.h"
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 4193345..57c01ab 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -84,6 +84,7 @@
 #include <linux/slab.h>
 #include <linux/hash.h>
 #include <linux/ratelimit.h>
+#include <linux/export.h>
 
 #include "wa-hc.h"
 #include "wusbhc.h"
diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c
index a2eaa3c..de81ebf 100644
--- a/drivers/uwb/est.c
+++ b/drivers/uwb/est.c
@@ -41,6 +41,7 @@
  */
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c
index da7b1d0..b08d1c2 100644
--- a/drivers/uwb/i1480/dfu/dfu.c
+++ b/drivers/uwb/i1480/dfu/dfu.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/uwb.h>
 #include <linux/random.h>
+#include <linux/export.h>
 
 /*
  * i1480_rceb_check - Check RCEB for expected field values
diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c
index 30acec7..902b0f2 100644
--- a/drivers/uwb/ie.c
+++ b/drivers/uwb/ie.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "uwb-internal.h"
 
 /**
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index 90113ba..5241f1d 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -25,9 +25,11 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/kdev_t.h>
 #include <linux/random.h>
+#include <linux/stat.h>
 #include "uwb-internal.h"
 
 /* We initialize addresses to 0xff (invalid, as it is bcast) */
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
index b4395f4..4d688c7 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/uwb/lc-rc.c
@@ -36,6 +36,7 @@
 #include <linux/etherdevice.h>
 #include <linux/usb.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
index 697e56a..a269937 100644
--- a/drivers/uwb/neh.c
+++ b/drivers/uwb/neh.c
@@ -85,6 +85,7 @@
 #include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c
index 99a19c1..8ee7d90 100644
--- a/drivers/uwb/pal.c
+++ b/drivers/uwb/pal.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
 #include <linux/uwb.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/radio.c b/drivers/uwb/radio.c
index f0d5549..d58dfec 100644
--- a/drivers/uwb/radio.c
+++ b/drivers/uwb/radio.c
@@ -17,6 +17,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/uwb.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 3de630b..7032285 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -32,6 +32,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c
index 78c8922..0b0d8bc 100644
--- a/drivers/uwb/rsv.c
+++ b/drivers/uwb/rsv.c
@@ -19,6 +19,7 @@
 #include <linux/uwb.h>
 #include <linux/slab.h>
 #include <linux/random.h>
+#include <linux/export.h>
 
 #include "uwb-internal.h"
 
diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c
index 367aa12..cbb6a5e 100644
--- a/drivers/uwb/scan.c
+++ b/drivers/uwb/scan.c
@@ -36,6 +36,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include "uwb-internal.h"
 
 
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index 5fad4e7..82a84d5 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/sysfs.h>
 #include <linux/workqueue.h>
+#include <linux/module.h>
 #include <linux/uwb/umc.h>
 #include <linux/pci.h>
 
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
index b2948ec..4613c13 100644
--- a/drivers/uwb/umc-dev.c
+++ b/drivers/uwb/umc-dev.c
@@ -6,6 +6,7 @@
  * This file is released under the GNU GPL v2.
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/uwb/umc.h>
 
diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c
index 367b5eb8..26d0ae1 100644
--- a/drivers/uwb/umc-drv.c
+++ b/drivers/uwb/umc-drv.c
@@ -6,6 +6,7 @@
  * This file is released under the GNU GPL v2.
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/uwb/umc.h>
 
 int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
index b221142..f48093e 100644
--- a/drivers/uwb/whci.c
+++ b/drivers/uwb/whci.c
@@ -7,6 +7,7 @@
  */
 #include <linux/delay.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8165c55..d83e967 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1753,7 +1753,7 @@
 
 config FB_AU1100
 	bool "Au1100 LCD Driver"
-	depends on (FB = y) && MIPS && SOC_AU1100
+	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1764,7 +1764,7 @@
 
 config FB_AU1200
 	bool "Au1200 LCD Driver"
-	depends on (FB = y) && MIPS && SOC_AU1200
+	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 4ac48d9..63409c1 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/backlight.h>
 #include <linux/gfp.h>
+#include <linux/module.h>
 
 #include <mach/board.h>
 #include <mach/cpu.h>
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index c04b94d..1105fa1 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/backlight.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/module.h>
 
 #define MAX_BRIGHTNESS		(0xFF)
 #define MIN_BRIGHTNESS		(0)
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
index d1aee73..dfb763e 100644
--- a/drivers/video/backlight/adp5520_bl.c
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -13,6 +13,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/adp5520.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct adp5520_bl {
 	struct device *master;
diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c
index 9f0a491e..7838a23 100644
--- a/drivers/video/backlight/ams369fg06.c
+++ b/drivers/video/backlight/ams369fg06.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/wait.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 62043f1..d68f14b 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -19,6 +19,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/da903x.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DA9030_WLED_CONTROL	0x25
 #define DA9030_WLED_CP_EN	(1 << 6)
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
index b058291..c74a6f4 100644
--- a/drivers/video/backlight/ep93xx_bl.c
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -13,6 +13,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 3543f1b..4f5d1c4 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/lcd.h>
 #include <linux/slab.h>
diff --git a/drivers/video/backlight/ld9040.c b/drivers/video/backlight/ld9040.c
index 5934655..da9a5ce 100644
--- a/drivers/video/backlight/ld9040.c
+++ b/drivers/video/backlight/ld9040.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/lcd.h>
 #include <linux/backlight.h>
+#include <linux/module.h>
 
 #include "ld9040_gamma.h"
 
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index 5d3cf33..4ec78cf 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -17,6 +17,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/lms283gf05.h>
+#include <linux/module.h>
 
 struct lms283gf05_state {
 	struct spi_device	*spi;
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index 07e8e27..7bbc80256 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -17,6 +17,7 @@
 #include <linux/backlight.h>
 #include <linux/mfd/max8925.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define MAX_BRIGHTNESS		(0xff)
 #define MIN_BRIGHTNESS		(0)
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 694e5aa..e132157 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/lcd.h>
 #include <linux/backlight.h>
+#include <linux/module.h>
 
 #include "s6e63m0_gamma.h"
 
diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
index d4c6eb2..fbe9e93 100644
--- a/drivers/video/backlight/wm831x_bl.c
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/slab.h>
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index cb09aa1f..2c76fdf 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "carminefb.h"
 #include "carminefb_regs.h"
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index e027643..f56699d 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 
 /*
  * Cursor position address
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 55f91d9..29577bf 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -116,6 +116,7 @@
 /* Clock registers available only on Version 2 */
 #define  LCD_CLK_ENABLE_REG			0x6c
 #define  LCD_CLK_RESET_REG			0x70
+#define  LCD_CLK_MAIN_RESET			BIT(3)
 
 #define LCD_NUM_BUFFERS	2
 
@@ -244,6 +245,10 @@
 {
 	u32 reg;
 
+	/* Bring LCDC out of reset */
+	if (lcd_revision == LCD_VERSION_2)
+		lcdc_write(0, LCD_CLK_RESET_REG);
+
 	reg = lcdc_read(LCD_RASTER_CTRL_REG);
 	if (!(reg & LCD_RASTER_ENABLE))
 		lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
@@ -257,6 +262,10 @@
 	reg = lcdc_read(LCD_RASTER_CTRL_REG);
 	if (reg & LCD_RASTER_ENABLE)
 		lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
+
+	if (lcd_revision == LCD_VERSION_2)
+		/* Write 1 to reset LCDC */
+		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
 }
 
 static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
@@ -584,8 +593,12 @@
 	lcdc_write(0, LCD_DMA_CTRL_REG);
 	lcdc_write(0, LCD_RASTER_CTRL_REG);
 
-	if (lcd_revision == LCD_VERSION_2)
+	if (lcd_revision == LCD_VERSION_2) {
 		lcdc_write(0, LCD_INT_ENABLE_SET_REG);
+		/* Write 1 to reset */
+		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
+		lcdc_write(0, LCD_CLK_RESET_REG);
+	}
 }
 
 static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
index 40e5f17..2e830ec5 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/ep93xx-fb.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c
index 4a874c8..2b106f0 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fb_ddc.c
@@ -1,5 +1,5 @@
 /*
- * driver/vide/fb_ddc.c - DDC/EDID read support.
+ * drivers/video/fb_ddc.c - DDC/EDID read support.
  *
  *  Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
  *
@@ -10,6 +10,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/slab.h>
diff --git a/drivers/video/fb_notify.c b/drivers/video/fb_notify.c
index 8c02038..74c2da5 100644
--- a/drivers/video/fb_notify.c
+++ b/drivers/video/fb_notify.c
@@ -12,6 +12,7 @@
  */
 #include <linux/fb.h>
 #include <linux/notifier.h>
+#include <linux/export.h>
 
 static BLOCKING_NOTIFIER_HEAD(fb_notifier_list);
 
diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/mb862xx/mb862xx-i2c.c
index 934081d..273769b 100644
--- a/drivers/video/mb862xx/mb862xx-i2c.c
+++ b/drivers/video/mb862xx/mb862xx-i2c.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include "mb862xxfb.h"
 #include "mb862xx_reg.h"
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c
index c16ff1d..11a7a33 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/mb862xx/mb862xxfbdrv.c
@@ -17,6 +17,7 @@
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c
index b934477..cb2ddf1 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/msm/mdp.c
@@ -28,6 +28,7 @@
 #include <mach/msm_iomap.h>
 #include <mach/msm_fb.h>
 #include <linux/platform_device.h>
+#include <linux/export.h>
 
 #include "mdp_hw.h"
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 0ccd7ad..6f61e78 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 90e3bdd..eb381db 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
+#include <linux/module.h>
 
 #include <plat/lcd_mipid.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index b3ddd74..25d8e51 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <plat/dma.h>
 
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 6892cfd..5c81533 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -25,6 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
@@ -1719,12 +1720,11 @@
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	unsigned long fclk = 0;
 
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
-		if (width != out_width || height != out_height)
-			return -EINVAL;
-		else
-			return 0;
-	}
+	if (width == out_width && height == out_height)
+		return 0;
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
+		return -EINVAL;
 
 	if (out_width < width / maxdownscale ||
 			out_width > width * 8)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 483888a..976ac23 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -24,6 +24,7 @@
 
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 43c04a9..5abf8e7e 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/semaphore.h>
 #include <linux/seq_file.h>
 #include <linux/platform_device.h>
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 3e09726..1703345 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -24,6 +24,7 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 3262f0f..c56378c 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -269,7 +269,7 @@
 unsigned long hdmi_get_pixel_clock(void)
 {
 	/* HDMI Pixel Clock in Mhz */
-	return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000;
+	return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000;
 }
 
 static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 1bd3703..1130c60 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -24,6 +24,7 @@
 
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 695dc04..40305ad 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/export.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 6b1ac23..df7bcce 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/omapfb.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 
 #include <video/omapdss.h>
 #include <plat/vrfb.h>
diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/savage/savagefb_accel.c
index bbcc055..bfefa62 100644
--- a/drivers/video/savage/savagefb_accel.c
+++ b/drivers/video/savage/savagefb_accel.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/fb.h>
+#include <linux/module.h>
 
 #include "savagefb.h"
 
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 24640c8..72ee96b 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
+#include <linux/module.h>
 
 #include <video/mipi_display.h>
 #include <video/sh_mipi_dsi.h>
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 3a41c01..facffc2 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -23,6 +23,7 @@
 #include <linux/console.h>
 #include <linux/backlight.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mobile_meram.h>
 #include <linux/atomic.h>
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 69d882c..c01c1c1 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -559,8 +559,8 @@
 #define M1200X720_R60_VSP       POSITIVE
 
 /* 1200x900@60 Sync Polarity (DCON) */
-#define M1200X900_R60_HSP       NEGATIVE
-#define M1200X900_R60_VSP       NEGATIVE
+#define M1200X900_R60_HSP       POSITIVE
+#define M1200X900_R60_VSP       POSITIVE
 
 /* 1280x600@60 Sync Polarity (GTF Mode) */
 #define M1280x600_R60_HSP       NEGATIVE
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
index ab53418..d69cfef 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/via/via-gpio.c
@@ -10,6 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/via-core.h>
 #include <linux/via-gpio.h>
+#include <linux/export.h>
 
 /*
  * The ports we know about.  Note that the port-25 gpios are not
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index c8be8af..2375e5b 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -33,6 +33,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <video/w100fb.h>
diff --git a/drivers/virt/fsl_hypervisor.c b/drivers/virt/fsl_hypervisor.c
index 3d91621..4939e0c 100644
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -706,6 +706,7 @@
 	.poll = fsl_hv_poll,
 	.read = fsl_hv_read,
 	.unlocked_ioctl = fsl_hv_ioctl,
+	.compat_ioctl = fsl_hv_ioctl,
 };
 
 static struct miscdevice fsl_hv_misc_dev = {
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 816ed08..1a61939 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -37,7 +37,7 @@
 
  config VIRTIO_MMIO
  	tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)"
- 	depends on EXPERIMENTAL
+ 	depends on HAS_IOMEM && EXPERIMENTAL
  	select VIRTIO
  	select VIRTIO_RING
  	---help---
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index efb35aa..984c501 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -1,6 +1,7 @@
 #include <linux/virtio.h>
 #include <linux/spinlock.h>
 #include <linux/virtio_config.h>
+#include <linux/module.h>
 
 /* Unique numbering for virtio devices. */
 static unsigned int dev_index;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index e058ace..94fd738 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -25,6 +25,7 @@
 #include <linux/freezer.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct virtio_balloon
 {
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index acc5e43..7317dc2e 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -118,7 +118,7 @@
 	vring_transport_features(vdev);
 
 	for (i = 0; i < ARRAY_SIZE(vdev->features); i++) {
-		writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET);
+		writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SEL);
 		writel(vdev->features[i],
 				vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES);
 	}
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 79a31e5..03d1984 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -169,11 +169,29 @@
 	iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
 }
 
+/* wait for pending irq handlers */
+static void vp_synchronize_vectors(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	int i;
+
+	if (vp_dev->intx_enabled)
+		synchronize_irq(vp_dev->pci_dev->irq);
+
+	for (i = 0; i < vp_dev->msix_vectors; ++i)
+		synchronize_irq(vp_dev->msix_entries[i].vector);
+}
+
 static void vp_reset(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	/* 0 status means a reset. */
 	iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush out the status write, and flush in device writes,
+	 * including MSi-X interrupts, if any. */
+	ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush pending VQ/configuration callbacks. */
+	vp_synchronize_vectors(vdev);
 }
 
 /* the notify function used when creating a virt queue */
@@ -594,11 +612,11 @@
 
 static void virtio_pci_release_dev(struct device *_d)
 {
-	struct virtio_device *dev = container_of(_d, struct virtio_device,
-						 dev);
-	struct virtio_pci_device *vp_dev = to_vp_device(dev);
-
-	kfree(vp_dev);
+	/*
+	 * No need for a release method as we allocate/free
+	 * all devices together with the pci devices.
+	 * Provide an empty one to avoid getting a warning from core.
+	 */
 }
 
 /* the PCI probing function */
@@ -686,6 +704,7 @@
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
 	pci_release_regions(pci_dev);
 	pci_disable_device(pci_dev);
+	kfree(vp_dev);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 4acf888..c7a2c20 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -21,6 +21,7 @@
 #include <linux/virtio_config.h>
 #include <linux/device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 /* virtio guest is communicating with a virtual "device" that actually runs on
  * a host processor.  Memory barriers are used to control SMP effects. */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 6335979..e9309778 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -23,6 +23,7 @@
 #include <linux/list.h>
 #include <linux/sched.h>	/* schedule_timeout() */
 #include <linux/delay.h>
+#include <linux/export.h>
 
 #include "w1_family.h"
 #include "w1.h"
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index f79e62e..6828835 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -24,6 +24,8 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 
 #include "w1.h"
 #include "w1_log.h"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 64c6752..79fd606 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -66,6 +66,7 @@
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
+	select WATCHDOG_CORE
 	help
 	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
 	  the watchdog triggers the system will be reset.
@@ -170,6 +171,7 @@
 config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
 	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+	select WATCHDOG_CORE
 	help
 	  Watchdog timer block in the Samsung SoCs. This will reboot
 	  the system when the timer expires with the watchdog enabled.
@@ -312,13 +314,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called nuc900_wdt.
 
-config ADX_WATCHDOG
-	tristate "Avionic Design Xanthos watchdog"
-	depends on ARCH_PXA_ADX
-	help
-	  Say Y here if you want support for the watchdog timer on Avionic
-	  Design Xanthos boards.
-
 config TS72XX_WATCHDOG
 	tristate "TS-72XX SBC Watchdog"
 	depends on MACH_TS72XX
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 55bd574..fe893e9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -51,7 +51,6 @@
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
-obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
 obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
deleted file mode 100644
index af6e6b1..0000000
--- a/drivers/watchdog/adx_wdt.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Avionic Design GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fs.h>
-#include <linux/gfp.h>
-#include <linux/io.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/watchdog.h>
-
-#define WATCHDOG_NAME "adx-wdt"
-
-/* register offsets */
-#define	ADX_WDT_CONTROL		0x00
-#define	ADX_WDT_CONTROL_ENABLE	(1 << 0)
-#define	ADX_WDT_CONTROL_nRESET	(1 << 1)
-#define	ADX_WDT_TIMEOUT		0x08
-
-static struct platform_device *adx_wdt_dev;
-static unsigned long driver_open;
-
-#define	WDT_STATE_STOP	0
-#define	WDT_STATE_START	1
-
-struct adx_wdt {
-	void __iomem *base;
-	unsigned long timeout;
-	unsigned int state;
-	unsigned int wake;
-	spinlock_t lock;
-};
-
-static const struct watchdog_info adx_wdt_info = {
-	.identity = "Avionic Design Xanthos Watchdog",
-	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-};
-
-static void adx_wdt_start_locked(struct adx_wdt *wdt)
-{
-	u32 ctrl;
-
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl |= ADX_WDT_CONTROL_ENABLE;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-	wdt->state = WDT_STATE_START;
-}
-
-static void adx_wdt_start(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	adx_wdt_start_locked(wdt);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_stop_locked(struct adx_wdt *wdt)
-{
-	u32 ctrl;
-
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-	wdt->state = WDT_STATE_STOP;
-}
-
-static void adx_wdt_stop(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	adx_wdt_stop_locked(wdt);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
-{
-	unsigned long timeout = seconds * 1000;
-	unsigned long flags;
-	unsigned int state;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	state = wdt->state;
-	adx_wdt_stop_locked(wdt);
-	writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
-
-	if (state == WDT_STATE_START)
-		adx_wdt_start_locked(wdt);
-
-	wdt->timeout = timeout;
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
-{
-	*seconds = wdt->timeout / 1000;
-}
-
-static void adx_wdt_keepalive(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static int adx_wdt_open(struct inode *inode, struct file *file)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
-
-	if (test_and_set_bit(0, &driver_open))
-		return -EBUSY;
-
-	file->private_data = wdt;
-	adx_wdt_set_timeout(wdt, 30);
-	adx_wdt_start(wdt);
-
-	return nonseekable_open(inode, file);
-}
-
-static int adx_wdt_release(struct inode *inode, struct file *file)
-{
-	struct adx_wdt *wdt = file->private_data;
-
-	adx_wdt_stop(wdt);
-	clear_bit(0, &driver_open);
-
-	return 0;
-}
-
-static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct adx_wdt *wdt = file->private_data;
-	void __user *argp = (void __user *)arg;
-	unsigned long __user *p = argp;
-	unsigned long seconds = 0;
-	unsigned int options;
-	long ret = -EINVAL;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
-			return -EFAULT;
-		else
-			return 0;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-		adx_wdt_keepalive(wdt);
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(seconds, p))
-			return -EFAULT;
-
-		adx_wdt_set_timeout(wdt, seconds);
-
-		/* fallthrough */
-	case WDIOC_GETTIMEOUT:
-		adx_wdt_get_timeout(wdt, &seconds);
-		return put_user(seconds, p);
-
-	case WDIOC_SETOPTIONS:
-		if (copy_from_user(&options, argp, sizeof(options)))
-			return -EFAULT;
-
-		if (options & WDIOS_DISABLECARD) {
-			adx_wdt_stop(wdt);
-			ret = 0;
-		}
-
-		if (options & WDIOS_ENABLECARD) {
-			adx_wdt_start(wdt);
-			ret = 0;
-		}
-
-		return ret;
-
-	default:
-		break;
-	}
-
-	return -ENOTTY;
-}
-
-static ssize_t adx_wdt_write(struct file *file, const char __user *data,
-		size_t len, loff_t *ppos)
-{
-	struct adx_wdt *wdt = file->private_data;
-
-	if (len)
-		adx_wdt_keepalive(wdt);
-
-	return len;
-}
-
-static const struct file_operations adx_wdt_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.open = adx_wdt_open,
-	.release = adx_wdt_release,
-	.unlocked_ioctl = adx_wdt_ioctl,
-	.write = adx_wdt_write,
-};
-
-static struct miscdevice adx_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &adx_wdt_fops,
-};
-
-static int __devinit adx_wdt_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct adx_wdt *wdt;
-	int ret = 0;
-	u32 ctrl;
-
-	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt) {
-		dev_err(&pdev->dev, "cannot allocate WDT structure\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&wdt->lock);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
-		return -ENXIO;
-	}
-
-	res = devm_request_mem_region(&pdev->dev, res->start,
-			resource_size(res), res->name);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot request I/O memory region\n");
-		return -ENXIO;
-	}
-
-	wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
-			resource_size(res));
-	if (!wdt->base) {
-		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-		return -ENXIO;
-	}
-
-	/* disable watchdog and reboot on timeout */
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
-	ctrl &= ~ADX_WDT_CONTROL_nRESET;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-
-	platform_set_drvdata(pdev, wdt);
-	adx_wdt_dev = pdev;
-
-	ret = misc_register(&adx_wdt_miscdev);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot register miscdev on minor %d "
-				"(err=%d)\n", WATCHDOG_MINOR, ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __devexit adx_wdt_remove(struct platform_device *pdev)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	misc_deregister(&adx_wdt_miscdev);
-	adx_wdt_stop(wdt);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static void adx_wdt_shutdown(struct platform_device *pdev)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-	adx_wdt_stop(wdt);
-}
-
-#ifdef CONFIG_PM
-static int adx_wdt_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
-	adx_wdt_stop(wdt);
-
-	return 0;
-}
-
-static int adx_wdt_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	if (wdt->wake)
-		adx_wdt_start(wdt);
-
-	return 0;
-}
-
-static const struct dev_pm_ops adx_wdt_pm_ops = {
-	.suspend = adx_wdt_suspend,
-	.resume = adx_wdt_resume,
-};
-
-#  define ADX_WDT_PM_OPS	(&adx_wdt_pm_ops)
-#else
-#  define ADX_WDT_PM_OPS	NULL
-#endif
-
-static struct platform_driver adx_wdt_driver = {
-	.probe = adx_wdt_probe,
-	.remove = __devexit_p(adx_wdt_remove),
-	.shutdown = adx_wdt_shutdown,
-	.driver = {
-		.name = WATCHDOG_NAME,
-		.owner = THIS_MODULE,
-		.pm = ADX_WDT_PM_OPS,
-	},
-};
-
-static int __init adx_wdt_init(void)
-{
-	return platform_driver_register(&adx_wdt_driver);
-}
-
-static void __exit adx_wdt_exit(void)
-{
-	platform_driver_unregister(&adx_wdt_driver);
-}
-
-module_init(adx_wdt_init);
-module_exit(adx_wdt_exit);
-
-MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 9291506..03f449a 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -429,7 +429,7 @@
 	writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
 
 	irq = platform_get_irq(pdev, 0);
-	if (request_irq(irq, coh901327_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, coh901327_interrupt, 0,
 			DRV_NAME " Bark", pdev)) {
 		ret = -EIO;
 		goto out_no_irq;
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index f1d1da6..41018d4 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -427,7 +427,7 @@
 {
 	int ret;
 
-	ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
+	ret = request_irq(irq, eurwdt_interrupt, 0, "eurwdt", NULL);
 	if (ret) {
 		printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
 		goto out;
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 751a591..ba6ad66 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO Watchdog Driver
  *
- *	(c) Copyright 2006-2010 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -44,7 +44,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.06"
+#define DRV_VERSION	"1.07"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -384,6 +384,11 @@
 	"Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+static int turn_SMI_watchdog_clear_off = 0;
+module_param(turn_SMI_watchdog_clear_off, int, 0);
+MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
+	"Turn off SMI clearing watchdog (default=0)");
+
 /*
  * Some TCO specific functions
  */
@@ -808,10 +813,12 @@
 		ret = -EIO;
 		goto out_unmap;
 	}
-	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
+	if (turn_SMI_watchdog_clear_off) {
+		/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+		val32 = inl(SMI_EN);
+		val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+		outl(val32, SMI_EN);
+	}
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 4dc3102..82ccd36 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -367,8 +367,7 @@
 		goto err_misc;
 	}
 
-	ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED,
-							"mpcore_wdt", wdt);
+	ret = request_irq(wdt->irq, mpcore_wdt_fire, 0, "mpcore_wdt", wdt);
 	if (ret) {
 		dev_printk(KERN_ERR, wdt->dev,
 			"cannot register IRQ%d for watchdog\n", wdt->irq);
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
index 945ee83..7c0d863 100644
--- a/drivers/watchdog/octeon-wdt-main.c
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -402,7 +402,7 @@
 	irq = OCTEON_IRQ_WDOG0 + core;
 
 	if (request_irq(irq, octeon_wdt_poke_irq,
-			IRQF_DISABLED, "octeon_wdt", octeon_wdt_poke_irq))
+			IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
 		panic("octeon_wdt: Couldn't obtain irq %d", irq);
 
 	cpumask_set_cpu(cpu, &irq_enabled_cpus);
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 30da88f..a79e384 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -27,9 +27,8 @@
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/timer.h>
-#include <linux/miscdevice.h>
+#include <linux/miscdevice.h> /* for MODULE_ALIAS_MISCDEV */
 #include <linux/watchdog.h>
-#include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
@@ -38,6 +37,7 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
+#include <linux/err.h>
 
 #include <mach/map.h>
 
@@ -74,14 +74,12 @@
 			"0 to reboot (default 0)");
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
 
-static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
 static struct resource	*wdt_irq;
 static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
-static char		 expect_close;
 static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
@@ -93,11 +91,13 @@
 
 /* functions */
 
-static void s3c2410wdt_keepalive(void)
+static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
 {
 	spin_lock(&wdt_lock);
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	spin_unlock(&wdt_lock);
+
+	return 0;
 }
 
 static void __s3c2410wdt_stop(void)
@@ -109,14 +109,16 @@
 	writel(wtcon, wdt_base + S3C2410_WTCON);
 }
 
-static void s3c2410wdt_stop(void)
+static int s3c2410wdt_stop(struct watchdog_device *wdd)
 {
 	spin_lock(&wdt_lock);
 	__s3c2410wdt_stop();
 	spin_unlock(&wdt_lock);
+
+	return 0;
 }
 
-static void s3c2410wdt_start(void)
+static int s3c2410wdt_start(struct watchdog_device *wdd)
 {
 	unsigned long wtcon;
 
@@ -142,6 +144,8 @@
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
 	spin_unlock(&wdt_lock);
+
+	return 0;
 }
 
 static inline int s3c2410wdt_is_running(void)
@@ -149,7 +153,7 @@
 	return readl(wdt_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
 }
 
-static int s3c2410wdt_set_heartbeat(int timeout)
+static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
 {
 	unsigned long freq = clk_get_rate(wdt_clock);
 	unsigned int count;
@@ -182,8 +186,6 @@
 		}
 	}
 
-	tmr_margin = timeout;
-
 	DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
 	    __func__, timeout, divisor, count, count/divisor);
 
@@ -201,70 +203,6 @@
 	return 0;
 }
 
-/*
- *	/dev/watchdog handling
- */
-
-static int s3c2410wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &open_lock))
-		return -EBUSY;
-
-	if (nowayout)
-		__module_get(THIS_MODULE);
-
-	expect_close = 0;
-
-	/* start the timer */
-	s3c2410wdt_start();
-	return nonseekable_open(inode, file);
-}
-
-static int s3c2410wdt_release(struct inode *inode, struct file *file)
-{
-	/*
-	 *	Shut off the timer.
-	 *	Lock it in if it's a module and we set nowayout
-	 */
-
-	if (expect_close == 42)
-		s3c2410wdt_stop();
-	else {
-		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
-		s3c2410wdt_keepalive();
-	}
-	expect_close = 0;
-	clear_bit(0, &open_lock);
-	return 0;
-}
-
-static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
-				size_t len, loff_t *ppos)
-{
-	/*
-	 *	Refresh the timer.
-	 */
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			/* In case it was set long ago */
-			expect_close = 0;
-
-			for (i = 0; i != len; i++) {
-				char c;
-
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = 42;
-			}
-		}
-		s3c2410wdt_keepalive();
-	}
-	return len;
-}
-
 #define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
 
 static const struct watchdog_info s3c2410_wdt_ident = {
@@ -273,53 +211,17 @@
 	.identity         =	"S3C2410 Watchdog",
 };
 
-
-static long s3c2410wdt_ioctl(struct file *file,	unsigned int cmd,
-							unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	int new_margin;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp, &s3c2410_wdt_ident,
-			sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-	case WDIOC_KEEPALIVE:
-		s3c2410wdt_keepalive();
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_margin, p))
-			return -EFAULT;
-		if (s3c2410wdt_set_heartbeat(new_margin))
-			return -EINVAL;
-		s3c2410wdt_keepalive();
-		return put_user(tmr_margin, p);
-	case WDIOC_GETTIMEOUT:
-		return put_user(tmr_margin, p);
-	default:
-		return -ENOTTY;
-	}
-}
-
-/* kernel interface */
-
-static const struct file_operations s3c2410wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= s3c2410wdt_write,
-	.unlocked_ioctl	= s3c2410wdt_ioctl,
-	.open		= s3c2410wdt_open,
-	.release	= s3c2410wdt_release,
+static struct watchdog_ops s3c2410wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = s3c2410wdt_start,
+	.stop = s3c2410wdt_stop,
+	.ping = s3c2410wdt_keepalive,
+	.set_timeout = s3c2410wdt_set_heartbeat,
 };
 
-static struct miscdevice s3c2410wdt_miscdev = {
-	.minor		= WATCHDOG_MINOR,
-	.name		= "watchdog",
-	.fops		= &s3c2410wdt_fops,
+static struct watchdog_device s3c2410_wdd = {
+	.info = &s3c2410_wdt_ident,
+	.ops = &s3c2410wdt_ops,
 };
 
 /* interrupt handler code */
@@ -328,7 +230,7 @@
 {
 	dev_info(wdt_dev, "watchdog timer expired (irq)\n");
 
-	s3c2410wdt_keepalive();
+	s3c2410wdt_keepalive(&s3c2410_wdd);
 	return IRQ_HANDLED;
 }
 
@@ -349,14 +251,14 @@
 		 * the watchdog is running.
 		 */
 
-		s3c2410wdt_keepalive();
+		s3c2410wdt_keepalive(&s3c2410_wdd);
 	} else if (val == CPUFREQ_POSTCHANGE) {
-		s3c2410wdt_stop();
+		s3c2410wdt_stop(&s3c2410_wdd);
 
-		ret = s3c2410wdt_set_heartbeat(tmr_margin);
+		ret = s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout);
 
 		if (ret >= 0)
-			s3c2410wdt_start();
+			s3c2410wdt_start(&s3c2410_wdd);
 		else
 			goto err;
 	}
@@ -365,7 +267,8 @@
 	return 0;
 
  err:
-	dev_err(wdt_dev, "cannot set new value for timeout %d\n", tmr_margin);
+	dev_err(wdt_dev, "cannot set new value for timeout %d\n",
+				s3c2410_wdd.timeout);
 	return ret;
 }
 
@@ -396,10 +299,6 @@
 }
 #endif
 
-
-
-/* device interface */
-
 static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev;
@@ -466,8 +365,8 @@
 	/* see if we can actually set the requested timer margin, and if
 	 * not, try the default value */
 
-	if (s3c2410wdt_set_heartbeat(tmr_margin)) {
-		started = s3c2410wdt_set_heartbeat(
+	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, tmr_margin)) {
+		started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
 					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 
 		if (started == 0)
@@ -479,22 +378,21 @@
 							"cannot start\n");
 	}
 
-	ret = misc_register(&s3c2410wdt_miscdev);
+	ret = watchdog_register_device(&s3c2410_wdd);
 	if (ret) {
-		dev_err(dev, "cannot register miscdev on minor=%d (%d)\n",
-			WATCHDOG_MINOR, ret);
+		dev_err(dev, "cannot register watchdog (%d)\n", ret);
 		goto err_cpufreq;
 	}
 
 	if (tmr_atboot && started == 0) {
 		dev_info(dev, "starting watchdog timer\n");
-		s3c2410wdt_start();
+		s3c2410wdt_start(&s3c2410_wdd);
 	} else if (!tmr_atboot) {
 		/* if we're not enabling the watchdog, then ensure it is
 		 * disabled if it has been left running from the bootloader
 		 * or other source */
 
-		s3c2410wdt_stop();
+		s3c2410wdt_stop(&s3c2410_wdd);
 	}
 
 	/* print out a statement of readiness */
@@ -503,8 +401,8 @@
 
 	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
-		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
-		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
+		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
+		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
 
 	return 0;
 
@@ -530,7 +428,7 @@
 
 static int __devexit s3c2410wdt_remove(struct platform_device *dev)
 {
-	misc_deregister(&s3c2410wdt_miscdev);
+	watchdog_unregister_device(&s3c2410_wdd);
 
 	s3c2410wdt_cpufreq_deregister();
 
@@ -550,7 +448,7 @@
 
 static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
-	s3c2410wdt_stop();
+	s3c2410wdt_stop(&s3c2410_wdd);
 }
 
 #ifdef CONFIG_PM
@@ -565,7 +463,7 @@
 	wtdat_save = readl(wdt_base + S3C2410_WTDAT);
 
 	/* Note that WTCNT doesn't need to be saved. */
-	s3c2410wdt_stop();
+	s3c2410wdt_stop(&s3c2410_wdd);
 
 	return 0;
 }
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index f31493e..b01a30e 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -300,7 +300,7 @@
 	 * get the resources
 	 */
 
-	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
 		ident.identity, (void *)user_dog);
 	if (ret) {
 		printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
@@ -350,7 +350,7 @@
 {
 	int ret;
 
-	ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
 		"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
 	if (ret) {
 		printk(KERN_CRIT
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index 52b63f2..b284040 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -398,7 +398,7 @@
 							WATCHDOG_TIMEOUT);
 	}
 
-	wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2);
+	wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2);
 	if (!wdtmrctl) {
 		printk(KERN_ERR PFX "Unable to remap memory\n");
 		rc = -ENOMEM;
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
index b3421fd..ac2346a 100644
--- a/drivers/watchdog/stmp3xxx_wdt.c
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <mach/platform.h>
 #include <mach/regs-rtc.h>
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index e5c91d4..dd5d675 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -142,7 +142,7 @@
 	w83627hf_unselect_wd_register();
 }
 
-static void wdt_ctrl(int timeout)
+static void wdt_set_time(int timeout)
 {
 	spin_lock(&io_lock);
 
@@ -158,13 +158,13 @@
 
 static int wdt_ping(void)
 {
-	wdt_ctrl(timeout);
+	wdt_set_time(timeout);
 	return 0;
 }
 
 static int wdt_disable(void)
 {
-	wdt_ctrl(0);
+	wdt_set_time(0);
 	return 0;
 }
 
@@ -176,6 +176,24 @@
 	return 0;
 }
 
+static int wdt_get_time(void)
+{
+	int timeleft;
+
+	spin_lock(&io_lock);
+
+	w83627hf_select_wd_register();
+
+	outb_p(0xF6, WDT_EFER);    /* Select CRF6 */
+	timeleft = inb_p(WDT_EFDR); /* Read Timeout counter to CRF6 */
+
+	w83627hf_unselect_wd_register();
+
+	spin_unlock(&io_lock);
+
+	return timeleft;
+}
+
 static ssize_t wdt_write(struct file *file, const char __user *buf,
 						size_t count, loff_t *ppos)
 {
@@ -202,7 +220,7 @@
 {
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
-	int new_timeout;
+	int timeval;
 	static const struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 							WDIOF_MAGICCLOSE,
@@ -238,14 +256,17 @@
 		wdt_ping();
 		break;
 	case WDIOC_SETTIMEOUT:
-		if (get_user(new_timeout, p))
+		if (get_user(timeval, p))
 			return -EFAULT;
-		if (wdt_set_heartbeat(new_timeout))
+		if (wdt_set_heartbeat(timeval))
 			return -EINVAL;
 		wdt_ping();
 		/* Fall */
 	case WDIOC_GETTIMEOUT:
 		return put_user(timeout, p);
+	case WDIOC_GETTIMELEFT:
+		timeval = wdt_get_time();
+		return put_user(timeval, p);
 	default:
 		return -ENOTTY;
 	}
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index bb03e15..d2ef002 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -612,7 +612,7 @@
 		goto out;
 	}
 
-	ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
+	ret = request_irq(irq, wdt_interrupt, 0, "wdt501p", NULL);
 	if (ret) {
 		printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
 		goto outreg;
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 172dad6..e0fc3baa 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -643,7 +643,7 @@
 	irq = dev->irq;
 	io = pci_resource_start(dev, 2);
 
-	if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
+	if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED,
 			 "wdt_pci", &wdtpci_miscdev)) {
 		printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
 		goto out_reg;
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 871caea..e789a47 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -12,8 +12,7 @@
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
@@ -29,19 +28,19 @@
 		 "Watchdog cannot be stopped once started (default="
 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
-static unsigned long wm831x_wdt_users;
-static struct miscdevice wm831x_wdt_miscdev;
-static int wm831x_wdt_expect_close;
-static DEFINE_MUTEX(wdt_mutex);
-static struct wm831x *wm831x;
-static unsigned int update_gpio;
-static unsigned int update_state;
+struct wm831x_wdt_drvdata {
+	struct watchdog_device wdt;
+	struct wm831x *wm831x;
+	struct mutex lock;
+	int update_gpio;
+	int update_state;
+};
 
 /* We can't use the sub-second values here but they're included
  * for completeness.  */
 static struct {
-	int time;  /* Seconds */
-	u16 val;   /* WDOG_TO value */
+	unsigned int time;  /* Seconds */
+	u16 val;            /* WDOG_TO value */
 } wm831x_wdt_cfgs[] = {
 	{  1, 2 },
 	{  2, 3 },
@@ -52,32 +51,13 @@
 	{ 33, 7 },  /* Actually 32.768s so include both, others round down */
 };
 
-static int wm831x_wdt_set_timeout(struct wm831x *wm831x, u16 value)
+static int wm831x_wdt_start(struct watchdog_device *wdt_dev)
 {
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
 	int ret;
 
-	mutex_lock(&wdt_mutex);
-
-	ret = wm831x_reg_unlock(wm831x);
-	if (ret == 0) {
-		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
-				      WM831X_WDOG_TO_MASK, value);
-		wm831x_reg_lock(wm831x);
-	} else {
-		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
-			ret);
-	}
-
-	mutex_unlock(&wdt_mutex);
-
-	return ret;
-}
-
-static int wm831x_wdt_start(struct wm831x *wm831x)
-{
-	int ret;
-
-	mutex_lock(&wdt_mutex);
+	mutex_lock(&driver_data->lock);
 
 	ret = wm831x_reg_unlock(wm831x);
 	if (ret == 0) {
@@ -89,16 +69,18 @@
 			ret);
 	}
 
-	mutex_unlock(&wdt_mutex);
+	mutex_unlock(&driver_data->lock);
 
 	return ret;
 }
 
-static int wm831x_wdt_stop(struct wm831x *wm831x)
+static int wm831x_wdt_stop(struct watchdog_device *wdt_dev)
 {
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
 	int ret;
 
-	mutex_lock(&wdt_mutex);
+	mutex_lock(&driver_data->lock);
 
 	ret = wm831x_reg_unlock(wm831x);
 	if (ret == 0) {
@@ -110,26 +92,28 @@
 			ret);
 	}
 
-	mutex_unlock(&wdt_mutex);
+	mutex_unlock(&driver_data->lock);
 
 	return ret;
 }
 
-static int wm831x_wdt_kick(struct wm831x *wm831x)
+static int wm831x_wdt_ping(struct watchdog_device *wdt_dev)
 {
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
 	int ret;
 	u16 reg;
 
-	mutex_lock(&wdt_mutex);
+	mutex_lock(&driver_data->lock);
 
-	if (update_gpio) {
-		gpio_set_value_cansleep(update_gpio, update_state);
-		update_state = !update_state;
+	if (driver_data->update_gpio) {
+		gpio_set_value_cansleep(driver_data->update_gpio,
+					driver_data->update_state);
+		driver_data->update_state = !driver_data->update_state;
 		ret = 0;
 		goto out;
 	}
 
-
 	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
 
 	if (!(reg & WM831X_WDOG_RST_SRC)) {
@@ -150,182 +134,59 @@
 	}
 
 out:
-	mutex_unlock(&wdt_mutex);
+	mutex_unlock(&driver_data->lock);
 
 	return ret;
 }
 
-static int wm831x_wdt_open(struct inode *inode, struct file *file)
+static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
 {
-	int ret;
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
+	int ret, i;
 
-	if (!wm831x)
-		return -ENODEV;
+	for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+		if (wm831x_wdt_cfgs[i].time == timeout)
+			break;
+	if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+		return -EINVAL;
 
-	if (test_and_set_bit(0, &wm831x_wdt_users))
-		return -EBUSY;
-
-	ret = wm831x_wdt_start(wm831x);
-	if (ret != 0)
-		return ret;
-
-	return nonseekable_open(inode, file);
-}
-
-static int wm831x_wdt_release(struct inode *inode, struct file *file)
-{
-	if (wm831x_wdt_expect_close)
-		wm831x_wdt_stop(wm831x);
-	else {
-		dev_warn(wm831x->dev, "Watchdog device closed uncleanly\n");
-		wm831x_wdt_kick(wm831x);
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_TO_MASK,
+				      wm831x_wdt_cfgs[i].val);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
 	}
 
-	clear_bit(0, &wm831x_wdt_users);
-
-	return 0;
+	return ret;
 }
 
-static ssize_t wm831x_wdt_write(struct file *file,
-				const char __user *data, size_t count,
-				loff_t *ppos)
-{
-	size_t i;
-
-	if (count) {
-		wm831x_wdt_kick(wm831x);
-
-		if (!nowayout) {
-			/* In case it was set long ago */
-			wm831x_wdt_expect_close = 0;
-
-			/* scan to see whether or not we got the magic
-			   character */
-			for (i = 0; i != count; i++) {
-				char c;
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					wm831x_wdt_expect_close = 42;
-			}
-		}
-	}
-	return count;
-}
-
-static const struct watchdog_info ident = {
+static const struct watchdog_info wm831x_wdt_info = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.identity = "WM831x Watchdog",
 };
 
-static long wm831x_wdt_ioctl(struct file *file, unsigned int cmd,
-			     unsigned long arg)
-{
-	int ret = -ENOTTY, time, i;
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	u16 reg;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
-		break;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(0, p);
-		break;
-
-	case WDIOC_SETOPTIONS:
-	{
-		int options;
-
-		if (get_user(options, p))
-			return -EFAULT;
-
-		ret = -EINVAL;
-
-		/* Setting both simultaneously means at least one must fail */
-		if (options == WDIOS_DISABLECARD)
-			ret = wm831x_wdt_start(wm831x);
-
-		if (options == WDIOS_ENABLECARD)
-			ret = wm831x_wdt_stop(wm831x);
-		break;
-	}
-
-	case WDIOC_KEEPALIVE:
-		ret = wm831x_wdt_kick(wm831x);
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		ret = get_user(time, p);
-		if (ret)
-			break;
-
-		if (time == 0) {
-			if (nowayout)
-				ret = -EINVAL;
-			else
-				wm831x_wdt_stop(wm831x);
-			break;
-		}
-
-		for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
-			if (wm831x_wdt_cfgs[i].time == time)
-				break;
-		if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
-			ret = -EINVAL;
-		else
-			ret = wm831x_wdt_set_timeout(wm831x,
-						     wm831x_wdt_cfgs[i].val);
-		break;
-
-	case WDIOC_GETTIMEOUT:
-		reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
-		reg &= WM831X_WDOG_TO_MASK;
-		for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
-			if (wm831x_wdt_cfgs[i].val == reg)
-				break;
-		if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) {
-			dev_warn(wm831x->dev,
-				 "Unknown watchdog configuration: %x\n", reg);
-			ret = -EINVAL;
-		} else
-			ret = put_user(wm831x_wdt_cfgs[i].time, p);
-
-	}
-
-	return ret;
-}
-
-static const struct file_operations wm831x_wdt_fops = {
+static const struct watchdog_ops wm831x_wdt_ops = {
 	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.write = wm831x_wdt_write,
-	.unlocked_ioctl = wm831x_wdt_ioctl,
-	.open = wm831x_wdt_open,
-	.release = wm831x_wdt_release,
-};
-
-static struct miscdevice wm831x_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &wm831x_wdt_fops,
+	.start = wm831x_wdt_start,
+	.stop = wm831x_wdt_stop,
+	.ping = wm831x_wdt_ping,
+	.set_timeout = wm831x_wdt_set_timeout,
 };
 
 static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
 {
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *chip_pdata;
 	struct wm831x_watchdog_pdata *pdata;
-	int reg, ret;
-
-	if (wm831x) {
-		dev_err(&pdev->dev, "wm831x watchdog already registered\n");
-		return -EBUSY;
-	}
-
-	wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_wdt_drvdata *driver_data;
+	struct watchdog_device *wm831x_wdt;
+	int reg, ret, i;
 
 	ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
 	if (ret < 0) {
@@ -338,6 +199,36 @@
 	if (reg & WM831X_WDOG_DEBUG)
 		dev_warn(wm831x->dev, "Watchdog is paused\n");
 
+	driver_data = kzalloc(sizeof(*driver_data), GFP_KERNEL);
+	if (!driver_data) {
+		dev_err(wm831x->dev, "Unable to alloacate watchdog device\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_init(&driver_data->lock);
+	driver_data->wm831x = wm831x;
+
+	wm831x_wdt = &driver_data->wdt;
+
+	wm831x_wdt->info = &wm831x_wdt_info;
+	wm831x_wdt->ops = &wm831x_wdt_ops;
+	watchdog_set_drvdata(wm831x_wdt, driver_data);
+
+	if (nowayout)
+		wm831x_wdt->status |= WDOG_NO_WAY_OUT;
+
+	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+	reg &= WM831X_WDOG_TO_MASK;
+	for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+		if (wm831x_wdt_cfgs[i].val == reg)
+			break;
+	if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+		dev_warn(wm831x->dev,
+			 "Unknown watchdog timeout: %x\n", reg);
+	else
+		wm831x_wdt->timeout = wm831x_wdt_cfgs[i].time;
+
 	/* Apply any configuration */
 	if (pdev->dev.parent->platform_data) {
 		chip_pdata = pdev->dev.parent->platform_data;
@@ -361,7 +252,7 @@
 				dev_err(wm831x->dev,
 					"Failed to request update GPIO: %d\n",
 					ret);
-				goto err;
+				goto err_alloc;
 			}
 
 			ret = gpio_direction_output(pdata->update_gpio, 0);
@@ -372,7 +263,7 @@
 				goto err_gpio;
 			}
 
-			update_gpio = pdata->update_gpio;
+			driver_data->update_gpio = pdata->update_gpio;
 
 			/* Make sure the watchdog takes hardware updates */
 			reg |= WM831X_WDOG_RST_SRC;
@@ -389,33 +280,34 @@
 		}
 	}
 
-	wm831x_wdt_miscdev.parent = &pdev->dev;
-
-	ret = misc_register(&wm831x_wdt_miscdev);
+	ret = watchdog_register_device(&driver_data->wdt);
 	if (ret != 0) {
-		dev_err(wm831x->dev, "Failed to register miscdev: %d\n", ret);
+		dev_err(wm831x->dev, "watchdog_register_device() failed: %d\n",
+			ret);
 		goto err_gpio;
 	}
 
+	dev_set_drvdata(&pdev->dev, driver_data);
+
 	return 0;
 
 err_gpio:
-	if (update_gpio) {
-		gpio_free(update_gpio);
-		update_gpio = 0;
-	}
+	if (driver_data->update_gpio)
+		gpio_free(driver_data->update_gpio);
+err_alloc:
+	kfree(driver_data);
 err:
 	return ret;
 }
 
 static int __devexit wm831x_wdt_remove(struct platform_device *pdev)
 {
-	if (update_gpio) {
-		gpio_free(update_gpio);
-		update_gpio = 0;
-	}
+	struct wm831x_wdt_drvdata *driver_data = dev_get_drvdata(&pdev->dev);
 
-	misc_deregister(&wm831x_wdt_miscdev);
+	watchdog_unregister_device(&driver_data->wdt);
+
+	if (driver_data->update_gpio)
+		gpio_free(driver_data->update_gpio);
 
 	return 0;
 }
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 5876e1a..31ab82f 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -39,6 +39,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
@@ -93,8 +94,8 @@
 #define inc_totalhigh_pages() (totalhigh_pages++)
 #define dec_totalhigh_pages() (totalhigh_pages--)
 #else
-#define inc_totalhigh_pages() do {} while(0)
-#define dec_totalhigh_pages() do {} while(0)
+#define inc_totalhigh_pages() do {} while (0)
+#define dec_totalhigh_pages() do {} while (0)
 #endif
 
 /* List of ballooned pages, threaded through the mem_map array. */
@@ -154,8 +155,7 @@
 	if (PageHighMem(page)) {
 		balloon_stats.balloon_high--;
 		inc_totalhigh_pages();
-	}
-	else
+	} else
 		balloon_stats.balloon_low--;
 
 	totalram_pages++;
@@ -422,7 +422,7 @@
 				(unsigned long)__va(pfn << PAGE_SHIFT),
 				__pte_ma(0), 0);
 			BUG_ON(ret);
-                }
+		}
 
 	}
 
@@ -501,17 +501,17 @@
  * alloc_xenballooned_pages - get pages that have been ballooned out
  * @nr_pages: Number of pages to get
  * @pages: pages returned
- * @highmem: highmem or lowmem pages
+ * @highmem: allow highmem pages
  * @return 0 on success, error otherwise
  */
 int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem)
 {
 	int pgno = 0;
-	struct page* page;
+	struct page *page;
 	mutex_lock(&balloon_mutex);
 	while (pgno < nr_pages) {
 		page = balloon_retrieve(highmem);
-		if (page && PageHighMem(page) == highmem) {
+		if (page && (highmem || !PageHighMem(page))) {
 			pages[pgno++] = page;
 		} else {
 			enum bp_state st;
@@ -540,7 +540,7 @@
  * @nr_pages: Number of pages
  * @pages: pages to return
  */
-void free_xenballooned_pages(int nr_pages, struct page** pages)
+void free_xenballooned_pages(int nr_pages, struct page **pages)
 {
 	int i;
 
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 0eb8a57..6e075cd 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -85,8 +85,7 @@
  *    IPI - IPI vector
  *    EVTCHN -
  */
-struct irq_info
-{
+struct irq_info {
 	struct list_head list;
 	enum xen_irq_type type;	/* type */
 	unsigned irq;
@@ -282,9 +281,9 @@
 					   struct shared_info *sh,
 					   unsigned int idx)
 {
-	return (sh->evtchn_pending[idx] &
+	return sh->evtchn_pending[idx] &
 		per_cpu(cpu_evtchn_mask, cpu)[idx] &
-		~sh->evtchn_mask[idx]);
+		~sh->evtchn_mask[idx];
 }
 
 static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
@@ -1180,7 +1179,7 @@
 	int cpu = get_cpu();
 	struct shared_info *s = HYPERVISOR_shared_info;
 	struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
- 	unsigned count;
+	unsigned count;
 
 	do {
 		unsigned long pending_words;
diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c
index f6832f4..e1c4c6e 100644
--- a/drivers/xen/gntalloc.c
+++ b/drivers/xen/gntalloc.c
@@ -135,7 +135,7 @@
 		/* Grant foreign access to the page. */
 		gref->gref_id = gnttab_grant_foreign_access(op->domid,
 			pfn_to_mfn(page_to_pfn(gref->page)), readonly);
-		if (gref->gref_id < 0) {
+		if ((int)gref->gref_id < 0) {
 			rc = gref->gref_id;
 			goto undo;
 		}
@@ -280,7 +280,7 @@
 		goto out;
 	}
 
-	gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY);
+	gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY);
 	if (!gref_ids) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 880798a..afca14d 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -114,11 +114,11 @@
 	if (NULL == add)
 		return NULL;
 
-	add->grants    = kzalloc(sizeof(add->grants[0])    * count, GFP_KERNEL);
-	add->map_ops   = kzalloc(sizeof(add->map_ops[0])   * count, GFP_KERNEL);
-	add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL);
-	add->kmap_ops  = kzalloc(sizeof(add->kmap_ops[0])  * count, GFP_KERNEL);
-	add->pages     = kzalloc(sizeof(add->pages[0])     * count, GFP_KERNEL);
+	add->grants    = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL);
+	add->map_ops   = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL);
+	add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL);
+	add->kmap_ops  = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL);
+	add->pages     = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
 	if (NULL == add->grants    ||
 	    NULL == add->map_ops   ||
 	    NULL == add->unmap_ops ||
@@ -193,9 +193,8 @@
 
 	atomic_sub(map->count, &pages_mapped);
 
-	if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
+	if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT)
 		notify_remote_via_evtchn(map->notify.event);
-	}
 
 	if (map->pages) {
 		if (!use_ptemod)
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 8c71ab80..bf1c094 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -193,7 +193,7 @@
 
 	nflags = shared[ref].flags;
 
-	return (nflags & (GTF_reading|GTF_writing));
+	return nflags & (GTF_reading|GTF_writing);
 }
 EXPORT_SYMBOL_GPL(gnttab_query_foreign_access);
 
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 0b5366b..ce4fa08 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -9,6 +9,7 @@
 #include <linux/stop_machine.h>
 #include <linux/freezer.h>
 #include <linux/syscore_ops.h>
+#include <linux/export.h>
 
 #include <xen/xen.h>
 #include <xen/xenbus.h>
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 6605707..b84bf0b 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -116,7 +116,7 @@
 			&manage_pci_ext);
 	} else {
 		struct physdev_manage_pci manage_pci = {
-			.bus 	= pci_dev->bus->number,
+			.bus	= pci_dev->bus->number,
 			.devfn	= pci_dev->devfn,
 		};
 
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index c984768..8e964b9 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -35,6 +35,7 @@
 
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 #include <xen/swiotlb-xen.h>
 #include <xen/page.h>
 #include <xen/xen-ops.h>
diff --git a/drivers/xen/xen-balloon.c b/drivers/xen/xen-balloon.c
index 5c9dc43..9cc2259 100644
--- a/drivers/xen/xen-balloon.c
+++ b/drivers/xen/xen-balloon.c
@@ -50,11 +50,6 @@
 
 static int register_balloon(struct sys_device *sysdev);
 
-static struct xenbus_watch target_watch =
-{
-	.node = "memory/target"
-};
-
 /* React to a change in the target key */
 static void watch_target(struct xenbus_watch *watch,
 			 const char **vec, unsigned int len)
@@ -73,6 +68,11 @@
 	 */
 	balloon_set_new_target(new_target >> (PAGE_SHIFT - 10));
 }
+static struct xenbus_watch target_watch = {
+	.node = "memory/target",
+	.callback = watch_target,
+};
+
 
 static int balloon_init_watcher(struct notifier_block *notifier,
 				unsigned long event,
@@ -87,7 +87,9 @@
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block xenstore_notifier;
+static struct notifier_block xenstore_notifier = {
+	.notifier_call = balloon_init_watcher,
+};
 
 static int __init balloon_init(void)
 {
@@ -100,9 +102,6 @@
 
 	register_xen_selfballooning(&balloon_sysdev);
 
-	target_watch.callback = watch_target;
-	xenstore_notifier.notifier_call = balloon_init_watcher;
-
 	register_xenstore_notifier(&xenstore_notifier);
 
 	return 0;
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 444345a..52fed16 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include "pciback.h"
 #include "conf_space.h"
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index cdacf92..1906125 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -33,7 +33,9 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <asm/xen/hypervisor.h>
+#include <asm/xen/page.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/event_channel.h>
 #include <xen/events.h>
@@ -435,25 +437,26 @@
 int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr)
 {
 	struct gnttab_map_grant_ref op = {
-		.flags = GNTMAP_host_map,
+		.flags = GNTMAP_host_map | GNTMAP_contains_pte,
 		.ref   = gnt_ref,
 		.dom   = dev->otherend_id,
 	};
 	struct vm_struct *area;
+	pte_t *pte;
 
 	*vaddr = NULL;
 
-	area = xen_alloc_vm_area(PAGE_SIZE);
+	area = alloc_vm_area(PAGE_SIZE, &pte);
 	if (!area)
 		return -ENOMEM;
 
-	op.host_addr = (unsigned long)area->addr;
+	op.host_addr = arbitrary_virt_to_machine(pte).maddr;
 
 	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
 		BUG();
 
 	if (op.status != GNTST_okay) {
-		xen_free_vm_area(area);
+		free_vm_area(area);
 		xenbus_dev_fatal(dev, op.status,
 				 "mapping in shared page %d from domain %d",
 				 gnt_ref, dev->otherend_id);
@@ -526,6 +529,7 @@
 	struct gnttab_unmap_grant_ref op = {
 		.host_addr = (unsigned long)vaddr,
 	};
+	unsigned int level;
 
 	/* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr)
 	 * method so that we don't have to muck with vmalloc internals here.
@@ -547,12 +551,14 @@
 	}
 
 	op.handle = (grant_handle_t)area->phys_addr;
+	op.host_addr = arbitrary_virt_to_machine(
+		lookup_address((unsigned long)vaddr, &level)).maddr;
 
 	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
 		BUG();
 
 	if (op.status == GNTST_okay)
-		xen_free_vm_area(area);
+		free_vm_area(area);
 	else
 		xenbus_dev_error(dev, op.status,
 				 "unmapping page at handle %d error %d",
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index cef9b0b..1b178c6 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -46,6 +46,7 @@
 #include <linux/mutex.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -309,8 +310,7 @@
 }
 EXPORT_SYMBOL_GPL(xenbus_unregister_driver);
 
-struct xb_find_info
-{
+struct xb_find_info {
 	struct xenbus_device *dev;
 	const char *nodename;
 };
@@ -639,7 +639,7 @@
 EXPORT_SYMBOL_GPL(xenbus_dev_cancel);
 
 /* A flag to determine if xenstored is 'ready' (i.e. has started) */
-int xenstored_ready = 0;
+int xenstored_ready;
 
 
 int register_xenstore_notifier(struct notifier_block *nb)
@@ -770,7 +770,7 @@
 	proc_mkdir("xen", NULL);
 #endif
 
- out_error:
+out_error:
 	return err;
 }
 
diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h
index b814935..9b1de4e 100644
--- a/drivers/xen/xenbus/xenbus_probe.h
+++ b/drivers/xen/xenbus/xenbus_probe.h
@@ -36,8 +36,7 @@
 
 #define XEN_BUS_ID_SIZE			20
 
-struct xen_bus_type
-{
+struct xen_bus_type {
 	char *root;
 	unsigned int levels;
 	int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
diff --git a/drivers/xen/xenbus/xenbus_probe_backend.c b/drivers/xen/xenbus/xenbus_probe_backend.c
index 32417b5..c3c7cd1 100644
--- a/drivers/xen/xenbus/xenbus_probe_backend.c
+++ b/drivers/xen/xenbus/xenbus_probe_backend.c
@@ -42,6 +42,7 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/notifier.h>
+#include <linux/export.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c
index 540587e..2f73195 100644
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -13,6 +13,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c
index e0c8472..988880d 100644
--- a/drivers/zorro/proc.c
+++ b/drivers/zorro/proc.c
@@ -13,6 +13,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <asm/uaccess.h>
 #include <asm/amigahw.h>
 #include <asm/setup.h>
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 9c5e6b2..c2183f3 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -22,6 +22,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/mempool.h>
+#include <linux/export.h>
 #include <linux/bio.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
diff --git a/fs/bio.c b/fs/bio.c
index 9bfade8..b1fe82c 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -255,7 +255,6 @@
 {
 	memset(bio, 0, sizeof(*bio));
 	bio->bi_flags = 1 << BIO_UPTODATE;
-	bio->bi_comp_cpu = -1;
 	atomic_set(&bio->bi_cnt, 1);
 }
 EXPORT_SYMBOL(bio_init);
@@ -338,7 +337,7 @@
  *	RETURNS:
  *	Pointer to new bio on success, NULL on failure.
  */
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
 {
 	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
 
@@ -366,7 +365,7 @@
  *   %__GFP_WAIT, the allocation is guaranteed to succeed.
  *
  **/
-struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs)
 {
 	struct bio *bio;
 
@@ -697,7 +696,8 @@
 	kfree(bmd);
 }
 
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+static struct bio_map_data *bio_alloc_map_data(int nr_segs,
+					       unsigned int iov_count,
 					       gfp_t gfp_mask)
 {
 	struct bio_map_data *bmd;
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 95f786e..b07f1da 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -971,7 +971,7 @@
 
 	if (!bdev->bd_disk)
 		return;
-	if (disk_partitionable(bdev->bd_disk))
+	if (disk_part_scan_enabled(bdev->bd_disk))
 		bdev->bd_invalidated = 1;
 }
 
@@ -1085,6 +1085,7 @@
 static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 {
 	struct gendisk *disk;
+	struct module *owner;
 	int ret;
 	int partno;
 	int perm = 0;
@@ -1110,6 +1111,7 @@
 	disk = get_gendisk(bdev->bd_dev, &partno);
 	if (!disk)
 		goto out;
+	owner = disk->fops->owner;
 
 	disk_block_events(disk);
 	mutex_lock_nested(&bdev->bd_mutex, for_part);
@@ -1137,8 +1139,8 @@
 					bdev->bd_disk = NULL;
 					mutex_unlock(&bdev->bd_mutex);
 					disk_unblock_events(disk);
-					module_put(disk->fops->owner);
 					put_disk(disk);
+					module_put(owner);
 					goto restart;
 				}
 			}
@@ -1194,8 +1196,8 @@
 				goto out_unlock_bdev;
 		}
 		/* only one opener holds refs to the module and disk */
-		module_put(disk->fops->owner);
 		put_disk(disk);
+		module_put(owner);
 	}
 	bdev->bd_openers++;
 	if (for_part)
@@ -1215,8 +1217,8 @@
  out_unlock_bdev:
 	mutex_unlock(&bdev->bd_mutex);
 	disk_unblock_events(disk);
-	module_put(disk->fops->owner);
 	put_disk(disk);
+	module_put(owner);
  out:
 	bdput(bdev);
 
@@ -1442,14 +1444,15 @@
 	if (!bdev->bd_openers) {
 		struct module *owner = disk->fops->owner;
 
-		put_disk(disk);
-		module_put(owner);
 		disk_put_part(bdev->bd_part);
 		bdev->bd_part = NULL;
 		bdev->bd_disk = NULL;
 		if (bdev != bdev->bd_contains)
 			victim = bdev->bd_contains;
 		bdev->bd_contains = NULL;
+
+		put_disk(disk);
+		module_put(owner);
 	}
 	mutex_unlock(&bdev->bd_mutex);
 	bdput(bdev);
diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index 40e6ac0..c0ddfd2 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -7,6 +7,7 @@
 	   extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
 	   extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
 	   export.o tree-log.o free-space-cache.o zlib.o lzo.o \
-	   compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o
+	   compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o \
+	   reada.o backref.o
 
 btrfs-$(CONFIG_BTRFS_FS_POSIX_ACL) += acl.o
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index eb159aa..89b156d 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -59,22 +59,19 @@
 		if (!value)
 			return ERR_PTR(-ENOMEM);
 		size = __btrfs_getxattr(inode, name, value, size);
-		if (size > 0) {
-			acl = posix_acl_from_xattr(value, size);
-			if (IS_ERR(acl)) {
-				kfree(value);
-				return acl;
-			}
-			set_cached_acl(inode, type, acl);
-		}
-		kfree(value);
+	}
+	if (size > 0) {
+		acl = posix_acl_from_xattr(value, size);
 	} else if (size == -ENOENT || size == -ENODATA || size == 0) {
 		/* FIXME, who returns -ENOENT?  I think nobody */
 		acl = NULL;
-		set_cached_acl(inode, type, acl);
 	} else {
 		acl = ERR_PTR(-EIO);
 	}
+	kfree(value);
+
+	if (!IS_ERR(acl))
+		set_cached_acl(inode, type, acl);
 
 	return acl;
 }
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
new file mode 100644
index 0000000..22c64ff
--- /dev/null
+++ b/fs/btrfs/backref.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright (C) 2011 STRATO.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include "ctree.h"
+#include "disk-io.h"
+#include "backref.h"
+
+struct __data_ref {
+	struct list_head list;
+	u64 inum;
+	u64 root;
+	u64 extent_data_item_offset;
+};
+
+struct __shared_ref {
+	struct list_head list;
+	u64 disk_byte;
+};
+
+static int __inode_info(u64 inum, u64 ioff, u8 key_type,
+			struct btrfs_root *fs_root, struct btrfs_path *path,
+			struct btrfs_key *found_key)
+{
+	int ret;
+	struct btrfs_key key;
+	struct extent_buffer *eb;
+
+	key.type = key_type;
+	key.objectid = inum;
+	key.offset = ioff;
+
+	ret = btrfs_search_slot(NULL, fs_root, &key, path, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	eb = path->nodes[0];
+	if (ret && path->slots[0] >= btrfs_header_nritems(eb)) {
+		ret = btrfs_next_leaf(fs_root, path);
+		if (ret)
+			return ret;
+		eb = path->nodes[0];
+	}
+
+	btrfs_item_key_to_cpu(eb, found_key, path->slots[0]);
+	if (found_key->type != key.type || found_key->objectid != key.objectid)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * this makes the path point to (inum INODE_ITEM ioff)
+ */
+int inode_item_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+			struct btrfs_path *path)
+{
+	struct btrfs_key key;
+	return __inode_info(inum, ioff, BTRFS_INODE_ITEM_KEY, fs_root, path,
+				&key);
+}
+
+static int inode_ref_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+				struct btrfs_path *path,
+				struct btrfs_key *found_key)
+{
+	return __inode_info(inum, ioff, BTRFS_INODE_REF_KEY, fs_root, path,
+				found_key);
+}
+
+/*
+ * this iterates to turn a btrfs_inode_ref into a full filesystem path. elements
+ * of the path are separated by '/' and the path is guaranteed to be
+ * 0-terminated. the path is only given within the current file system.
+ * Therefore, it never starts with a '/'. the caller is responsible to provide
+ * "size" bytes in "dest". the dest buffer will be filled backwards. finally,
+ * the start point of the resulting string is returned. this pointer is within
+ * dest, normally.
+ * in case the path buffer would overflow, the pointer is decremented further
+ * as if output was written to the buffer, though no more output is actually
+ * generated. that way, the caller can determine how much space would be
+ * required for the path to fit into the buffer. in that case, the returned
+ * value will be smaller than dest. callers must check this!
+ */
+static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+				struct btrfs_inode_ref *iref,
+				struct extent_buffer *eb_in, u64 parent,
+				char *dest, u32 size)
+{
+	u32 len;
+	int slot;
+	u64 next_inum;
+	int ret;
+	s64 bytes_left = size - 1;
+	struct extent_buffer *eb = eb_in;
+	struct btrfs_key found_key;
+
+	if (bytes_left >= 0)
+		dest[bytes_left] = '\0';
+
+	while (1) {
+		len = btrfs_inode_ref_name_len(eb, iref);
+		bytes_left -= len;
+		if (bytes_left >= 0)
+			read_extent_buffer(eb, dest + bytes_left,
+						(unsigned long)(iref + 1), len);
+		if (eb != eb_in)
+			free_extent_buffer(eb);
+		ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+		if (ret)
+			break;
+		next_inum = found_key.offset;
+
+		/* regular exit ahead */
+		if (parent == next_inum)
+			break;
+
+		slot = path->slots[0];
+		eb = path->nodes[0];
+		/* make sure we can use eb after releasing the path */
+		if (eb != eb_in)
+			atomic_inc(&eb->refs);
+		btrfs_release_path(path);
+
+		iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
+		parent = next_inum;
+		--bytes_left;
+		if (bytes_left >= 0)
+			dest[bytes_left] = '/';
+	}
+
+	btrfs_release_path(path);
+
+	if (ret)
+		return ERR_PTR(ret);
+
+	return dest + bytes_left;
+}
+
+/*
+ * this makes the path point to (logical EXTENT_ITEM *)
+ * returns BTRFS_EXTENT_FLAG_DATA for data, BTRFS_EXTENT_FLAG_TREE_BLOCK for
+ * tree blocks and <0 on error.
+ */
+int extent_from_logical(struct btrfs_fs_info *fs_info, u64 logical,
+			struct btrfs_path *path, struct btrfs_key *found_key)
+{
+	int ret;
+	u64 flags;
+	u32 item_size;
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct btrfs_key key;
+
+	key.type = BTRFS_EXTENT_ITEM_KEY;
+	key.objectid = logical;
+	key.offset = (u64)-1;
+
+	ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
+	if (ret < 0)
+		return ret;
+	ret = btrfs_previous_item(fs_info->extent_root, path,
+					0, BTRFS_EXTENT_ITEM_KEY);
+	if (ret < 0)
+		return ret;
+
+	btrfs_item_key_to_cpu(path->nodes[0], found_key, path->slots[0]);
+	if (found_key->type != BTRFS_EXTENT_ITEM_KEY ||
+	    found_key->objectid > logical ||
+	    found_key->objectid + found_key->offset <= logical)
+		return -ENOENT;
+
+	eb = path->nodes[0];
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+	BUG_ON(item_size < sizeof(*ei));
+
+	ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+	flags = btrfs_extent_flags(eb, ei);
+
+	if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+		return BTRFS_EXTENT_FLAG_TREE_BLOCK;
+	if (flags & BTRFS_EXTENT_FLAG_DATA)
+		return BTRFS_EXTENT_FLAG_DATA;
+
+	return -EIO;
+}
+
+/*
+ * helper function to iterate extent inline refs. ptr must point to a 0 value
+ * for the first call and may be modified. it is used to track state.
+ * if more refs exist, 0 is returned and the next call to
+ * __get_extent_inline_ref must pass the modified ptr parameter to get the
+ * next ref. after the last ref was processed, 1 is returned.
+ * returns <0 on error
+ */
+static int __get_extent_inline_ref(unsigned long *ptr, struct extent_buffer *eb,
+				struct btrfs_extent_item *ei, u32 item_size,
+				struct btrfs_extent_inline_ref **out_eiref,
+				int *out_type)
+{
+	unsigned long end;
+	u64 flags;
+	struct btrfs_tree_block_info *info;
+
+	if (!*ptr) {
+		/* first call */
+		flags = btrfs_extent_flags(eb, ei);
+		if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+			info = (struct btrfs_tree_block_info *)(ei + 1);
+			*out_eiref =
+				(struct btrfs_extent_inline_ref *)(info + 1);
+		} else {
+			*out_eiref = (struct btrfs_extent_inline_ref *)(ei + 1);
+		}
+		*ptr = (unsigned long)*out_eiref;
+		if ((void *)*ptr >= (void *)ei + item_size)
+			return -ENOENT;
+	}
+
+	end = (unsigned long)ei + item_size;
+	*out_eiref = (struct btrfs_extent_inline_ref *)*ptr;
+	*out_type = btrfs_extent_inline_ref_type(eb, *out_eiref);
+
+	*ptr += btrfs_extent_inline_ref_size(*out_type);
+	WARN_ON(*ptr > end);
+	if (*ptr == end)
+		return 1; /* last */
+
+	return 0;
+}
+
+/*
+ * reads the tree block backref for an extent. tree level and root are returned
+ * through out_level and out_root. ptr must point to a 0 value for the first
+ * call and may be modified (see __get_extent_inline_ref comment).
+ * returns 0 if data was provided, 1 if there was no more data to provide or
+ * <0 on error.
+ */
+int tree_backref_for_extent(unsigned long *ptr, struct extent_buffer *eb,
+				struct btrfs_extent_item *ei, u32 item_size,
+				u64 *out_root, u8 *out_level)
+{
+	int ret;
+	int type;
+	struct btrfs_tree_block_info *info;
+	struct btrfs_extent_inline_ref *eiref;
+
+	if (*ptr == (unsigned long)-1)
+		return 1;
+
+	while (1) {
+		ret = __get_extent_inline_ref(ptr, eb, ei, item_size,
+						&eiref, &type);
+		if (ret < 0)
+			return ret;
+
+		if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+		    type == BTRFS_SHARED_BLOCK_REF_KEY)
+			break;
+
+		if (ret == 1)
+			return 1;
+	}
+
+	/* we can treat both ref types equally here */
+	info = (struct btrfs_tree_block_info *)(ei + 1);
+	*out_root = btrfs_extent_inline_ref_offset(eb, eiref);
+	*out_level = btrfs_tree_block_level(eb, info);
+
+	if (ret == 1)
+		*ptr = (unsigned long)-1;
+
+	return 0;
+}
+
+static int __data_list_add(struct list_head *head, u64 inum,
+				u64 extent_data_item_offset, u64 root)
+{
+	struct __data_ref *ref;
+
+	ref = kmalloc(sizeof(*ref), GFP_NOFS);
+	if (!ref)
+		return -ENOMEM;
+
+	ref->inum = inum;
+	ref->extent_data_item_offset = extent_data_item_offset;
+	ref->root = root;
+	list_add_tail(&ref->list, head);
+
+	return 0;
+}
+
+static int __data_list_add_eb(struct list_head *head, struct extent_buffer *eb,
+				struct btrfs_extent_data_ref *dref)
+{
+	return __data_list_add(head, btrfs_extent_data_ref_objectid(eb, dref),
+				btrfs_extent_data_ref_offset(eb, dref),
+				btrfs_extent_data_ref_root(eb, dref));
+}
+
+static int __shared_list_add(struct list_head *head, u64 disk_byte)
+{
+	struct __shared_ref *ref;
+
+	ref = kmalloc(sizeof(*ref), GFP_NOFS);
+	if (!ref)
+		return -ENOMEM;
+
+	ref->disk_byte = disk_byte;
+	list_add_tail(&ref->list, head);
+
+	return 0;
+}
+
+static int __iter_shared_inline_ref_inodes(struct btrfs_fs_info *fs_info,
+					   u64 logical, u64 inum,
+					   u64 extent_data_item_offset,
+					   u64 extent_offset,
+					   struct btrfs_path *path,
+					   struct list_head *data_refs,
+					   iterate_extent_inodes_t *iterate,
+					   void *ctx)
+{
+	u64 ref_root;
+	u32 item_size;
+	struct btrfs_key key;
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct btrfs_extent_inline_ref *eiref;
+	struct __data_ref *ref;
+	int ret;
+	int type;
+	int last;
+	unsigned long ptr = 0;
+
+	WARN_ON(!list_empty(data_refs));
+	ret = extent_from_logical(fs_info, logical, path, &key);
+	if (ret & BTRFS_EXTENT_FLAG_DATA)
+		ret = -EIO;
+	if (ret < 0)
+		goto out;
+
+	eb = path->nodes[0];
+	ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+	ret = 0;
+	ref_root = 0;
+	/*
+	 * as done in iterate_extent_inodes, we first build a list of refs to
+	 * iterate, then free the path and then iterate them to avoid deadlocks.
+	 */
+	do {
+		last = __get_extent_inline_ref(&ptr, eb, ei, item_size,
+						&eiref, &type);
+		if (last < 0) {
+			ret = last;
+			goto out;
+		}
+		if (type == BTRFS_TREE_BLOCK_REF_KEY ||
+		    type == BTRFS_SHARED_BLOCK_REF_KEY) {
+			ref_root = btrfs_extent_inline_ref_offset(eb, eiref);
+			ret = __data_list_add(data_refs, inum,
+						extent_data_item_offset,
+						ref_root);
+		}
+	} while (!ret && !last);
+
+	btrfs_release_path(path);
+
+	if (ref_root == 0) {
+		printk(KERN_ERR "btrfs: failed to find tree block ref "
+			"for shared data backref %llu\n", logical);
+		WARN_ON(1);
+		ret = -EIO;
+	}
+
+out:
+	while (!list_empty(data_refs)) {
+		ref = list_first_entry(data_refs, struct __data_ref, list);
+		list_del(&ref->list);
+		if (!ret)
+			ret = iterate(ref->inum, extent_offset +
+					ref->extent_data_item_offset,
+					ref->root, ctx);
+		kfree(ref);
+	}
+
+	return ret;
+}
+
+static int __iter_shared_inline_ref(struct btrfs_fs_info *fs_info,
+				    u64 logical, u64 orig_extent_item_objectid,
+				    u64 extent_offset, struct btrfs_path *path,
+				    struct list_head *data_refs,
+				    iterate_extent_inodes_t *iterate,
+				    void *ctx)
+{
+	u64 disk_byte;
+	struct btrfs_key key;
+	struct btrfs_file_extent_item *fi;
+	struct extent_buffer *eb;
+	int slot;
+	int nritems;
+	int ret;
+	int found = 0;
+
+	eb = read_tree_block(fs_info->tree_root, logical,
+				fs_info->tree_root->leafsize, 0);
+	if (!eb)
+		return -EIO;
+
+	/*
+	 * from the shared data ref, we only have the leaf but we need
+	 * the key. thus, we must look into all items and see that we
+	 * find one (some) with a reference to our extent item.
+	 */
+	nritems = btrfs_header_nritems(eb);
+	for (slot = 0; slot < nritems; ++slot) {
+		btrfs_item_key_to_cpu(eb, &key, slot);
+		if (key.type != BTRFS_EXTENT_DATA_KEY)
+			continue;
+		fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+		if (!fi) {
+			free_extent_buffer(eb);
+			return -EIO;
+		}
+		disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+		if (disk_byte != orig_extent_item_objectid) {
+			if (found)
+				break;
+			else
+				continue;
+		}
+		++found;
+		ret = __iter_shared_inline_ref_inodes(fs_info, logical,
+							key.objectid,
+							key.offset,
+							extent_offset, path,
+							data_refs,
+							iterate, ctx);
+		if (ret)
+			break;
+	}
+
+	if (!found) {
+		printk(KERN_ERR "btrfs: failed to follow shared data backref "
+			"to parent %llu\n", logical);
+		WARN_ON(1);
+		ret = -EIO;
+	}
+
+	free_extent_buffer(eb);
+	return ret;
+}
+
+/*
+ * calls iterate() for every inode that references the extent identified by
+ * the given parameters. will use the path given as a parameter and return it
+ * released.
+ * when the iterator function returns a non-zero value, iteration stops.
+ */
+int iterate_extent_inodes(struct btrfs_fs_info *fs_info,
+				struct btrfs_path *path,
+				u64 extent_item_objectid,
+				u64 extent_offset,
+				iterate_extent_inodes_t *iterate, void *ctx)
+{
+	unsigned long ptr = 0;
+	int last;
+	int ret;
+	int type;
+	u64 logical;
+	u32 item_size;
+	struct btrfs_extent_inline_ref *eiref;
+	struct btrfs_extent_data_ref *dref;
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct btrfs_key key;
+	struct list_head data_refs = LIST_HEAD_INIT(data_refs);
+	struct list_head shared_refs = LIST_HEAD_INIT(shared_refs);
+	struct __data_ref *ref_d;
+	struct __shared_ref *ref_s;
+
+	eb = path->nodes[0];
+	ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+	/* first we iterate the inline refs, ... */
+	do {
+		last = __get_extent_inline_ref(&ptr, eb, ei, item_size,
+						&eiref, &type);
+		if (last == -ENOENT) {
+			ret = 0;
+			break;
+		}
+		if (last < 0) {
+			ret = last;
+			break;
+		}
+
+		if (type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = (struct btrfs_extent_data_ref *)(&eiref->offset);
+			ret = __data_list_add_eb(&data_refs, eb, dref);
+		} else if (type == BTRFS_SHARED_DATA_REF_KEY) {
+			logical = btrfs_extent_inline_ref_offset(eb, eiref);
+			ret = __shared_list_add(&shared_refs, logical);
+		}
+	} while (!ret && !last);
+
+	/* ... then we proceed to in-tree references and ... */
+	while (!ret) {
+		++path->slots[0];
+		if (path->slots[0] > btrfs_header_nritems(eb)) {
+			ret = btrfs_next_leaf(fs_info->extent_root, path);
+			if (ret) {
+				if (ret == 1)
+					ret = 0; /* we're done */
+				break;
+			}
+			eb = path->nodes[0];
+		}
+		btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
+		if (key.objectid != extent_item_objectid)
+			break;
+		if (key.type == BTRFS_EXTENT_DATA_REF_KEY) {
+			dref = btrfs_item_ptr(eb, path->slots[0],
+						struct btrfs_extent_data_ref);
+			ret = __data_list_add_eb(&data_refs, eb, dref);
+		} else if (key.type == BTRFS_SHARED_DATA_REF_KEY) {
+			ret = __shared_list_add(&shared_refs, key.offset);
+		}
+	}
+
+	btrfs_release_path(path);
+
+	/*
+	 * ... only at the very end we can process the refs we found. this is
+	 * because the iterator function we call is allowed to make tree lookups
+	 * and we have to avoid deadlocks. additionally, we need more tree
+	 * lookups ourselves for shared data refs.
+	 */
+	while (!list_empty(&data_refs)) {
+		ref_d = list_first_entry(&data_refs, struct __data_ref, list);
+		list_del(&ref_d->list);
+		if (!ret)
+			ret = iterate(ref_d->inum, extent_offset +
+					ref_d->extent_data_item_offset,
+					ref_d->root, ctx);
+		kfree(ref_d);
+	}
+
+	while (!list_empty(&shared_refs)) {
+		ref_s = list_first_entry(&shared_refs, struct __shared_ref,
+					list);
+		list_del(&ref_s->list);
+		if (!ret)
+			ret = __iter_shared_inline_ref(fs_info,
+							ref_s->disk_byte,
+							extent_item_objectid,
+							extent_offset, path,
+							&data_refs,
+							iterate, ctx);
+		kfree(ref_s);
+	}
+
+	return ret;
+}
+
+int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info,
+				struct btrfs_path *path,
+				iterate_extent_inodes_t *iterate, void *ctx)
+{
+	int ret;
+	u64 offset;
+	struct btrfs_key found_key;
+
+	ret = extent_from_logical(fs_info, logical, path,
+					&found_key);
+	if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+		ret = -EINVAL;
+	if (ret < 0)
+		return ret;
+
+	offset = logical - found_key.objectid;
+	ret = iterate_extent_inodes(fs_info, path, found_key.objectid,
+					offset, iterate, ctx);
+
+	return ret;
+}
+
+static int iterate_irefs(u64 inum, struct btrfs_root *fs_root,
+				struct btrfs_path *path,
+				iterate_irefs_t *iterate, void *ctx)
+{
+	int ret;
+	int slot;
+	u32 cur;
+	u32 len;
+	u32 name_len;
+	u64 parent = 0;
+	int found = 0;
+	struct extent_buffer *eb;
+	struct btrfs_item *item;
+	struct btrfs_inode_ref *iref;
+	struct btrfs_key found_key;
+
+	while (1) {
+		ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path,
+					&found_key);
+		if (ret < 0)
+			break;
+		if (ret) {
+			ret = found ? 0 : -ENOENT;
+			break;
+		}
+		++found;
+
+		parent = found_key.offset;
+		slot = path->slots[0];
+		eb = path->nodes[0];
+		/* make sure we can use eb after releasing the path */
+		atomic_inc(&eb->refs);
+		btrfs_release_path(path);
+
+		item = btrfs_item_nr(eb, slot);
+		iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
+
+		for (cur = 0; cur < btrfs_item_size(eb, item); cur += len) {
+			name_len = btrfs_inode_ref_name_len(eb, iref);
+			/* path must be released before calling iterate()! */
+			ret = iterate(parent, iref, eb, ctx);
+			if (ret) {
+				free_extent_buffer(eb);
+				break;
+			}
+			len = sizeof(*iref) + name_len;
+			iref = (struct btrfs_inode_ref *)((char *)iref + len);
+		}
+		free_extent_buffer(eb);
+	}
+
+	btrfs_release_path(path);
+
+	return ret;
+}
+
+/*
+ * returns 0 if the path could be dumped (probably truncated)
+ * returns <0 in case of an error
+ */
+static int inode_to_path(u64 inum, struct btrfs_inode_ref *iref,
+				struct extent_buffer *eb, void *ctx)
+{
+	struct inode_fs_paths *ipath = ctx;
+	char *fspath;
+	char *fspath_min;
+	int i = ipath->fspath->elem_cnt;
+	const int s_ptr = sizeof(char *);
+	u32 bytes_left;
+
+	bytes_left = ipath->fspath->bytes_left > s_ptr ?
+					ipath->fspath->bytes_left - s_ptr : 0;
+
+	fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr;
+	fspath = iref_to_path(ipath->fs_root, ipath->btrfs_path, iref, eb,
+				inum, fspath_min, bytes_left);
+	if (IS_ERR(fspath))
+		return PTR_ERR(fspath);
+
+	if (fspath > fspath_min) {
+		ipath->fspath->val[i] = (u64)(unsigned long)fspath;
+		++ipath->fspath->elem_cnt;
+		ipath->fspath->bytes_left = fspath - fspath_min;
+	} else {
+		++ipath->fspath->elem_missed;
+		ipath->fspath->bytes_missing += fspath_min - fspath;
+		ipath->fspath->bytes_left = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * this dumps all file system paths to the inode into the ipath struct, provided
+ * is has been created large enough. each path is zero-terminated and accessed
+ * from ipath->fspath->val[i].
+ * when it returns, there are ipath->fspath->elem_cnt number of paths available
+ * in ipath->fspath->val[]. when the allocated space wasn't sufficient, the
+ * number of missed paths in recored in ipath->fspath->elem_missed, otherwise,
+ * it's zero. ipath->fspath->bytes_missing holds the number of bytes that would
+ * have been needed to return all paths.
+ */
+int paths_from_inode(u64 inum, struct inode_fs_paths *ipath)
+{
+	return iterate_irefs(inum, ipath->fs_root, ipath->btrfs_path,
+				inode_to_path, ipath);
+}
+
+/*
+ * allocates space to return multiple file system paths for an inode.
+ * total_bytes to allocate are passed, note that space usable for actual path
+ * information will be total_bytes - sizeof(struct inode_fs_paths).
+ * the returned pointer must be freed with free_ipath() in the end.
+ */
+struct btrfs_data_container *init_data_container(u32 total_bytes)
+{
+	struct btrfs_data_container *data;
+	size_t alloc_bytes;
+
+	alloc_bytes = max_t(size_t, total_bytes, sizeof(*data));
+	data = kmalloc(alloc_bytes, GFP_NOFS);
+	if (!data)
+		return ERR_PTR(-ENOMEM);
+
+	if (total_bytes >= sizeof(*data)) {
+		data->bytes_left = total_bytes - sizeof(*data);
+		data->bytes_missing = 0;
+	} else {
+		data->bytes_missing = sizeof(*data) - total_bytes;
+		data->bytes_left = 0;
+	}
+
+	data->elem_cnt = 0;
+	data->elem_missed = 0;
+
+	return data;
+}
+
+/*
+ * allocates space to return multiple file system paths for an inode.
+ * total_bytes to allocate are passed, note that space usable for actual path
+ * information will be total_bytes - sizeof(struct inode_fs_paths).
+ * the returned pointer must be freed with free_ipath() in the end.
+ */
+struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
+					struct btrfs_path *path)
+{
+	struct inode_fs_paths *ifp;
+	struct btrfs_data_container *fspath;
+
+	fspath = init_data_container(total_bytes);
+	if (IS_ERR(fspath))
+		return (void *)fspath;
+
+	ifp = kmalloc(sizeof(*ifp), GFP_NOFS);
+	if (!ifp) {
+		kfree(fspath);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ifp->btrfs_path = path;
+	ifp->fspath = fspath;
+	ifp->fs_root = fs_root;
+
+	return ifp;
+}
+
+void free_ipath(struct inode_fs_paths *ipath)
+{
+	kfree(ipath);
+}
diff --git a/fs/btrfs/backref.h b/fs/btrfs/backref.h
new file mode 100644
index 0000000..9261883
--- /dev/null
+++ b/fs/btrfs/backref.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2011 STRATO.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#ifndef __BTRFS_BACKREF__
+#define __BTRFS_BACKREF__
+
+#include "ioctl.h"
+
+struct inode_fs_paths {
+	struct btrfs_path		*btrfs_path;
+	struct btrfs_root		*fs_root;
+	struct btrfs_data_container	*fspath;
+};
+
+typedef int (iterate_extent_inodes_t)(u64 inum, u64 offset, u64 root,
+		void *ctx);
+typedef int (iterate_irefs_t)(u64 parent, struct btrfs_inode_ref *iref,
+				struct extent_buffer *eb, void *ctx);
+
+int inode_item_info(u64 inum, u64 ioff, struct btrfs_root *fs_root,
+			struct btrfs_path *path);
+
+int extent_from_logical(struct btrfs_fs_info *fs_info, u64 logical,
+			struct btrfs_path *path, struct btrfs_key *found_key);
+
+int tree_backref_for_extent(unsigned long *ptr, struct extent_buffer *eb,
+				struct btrfs_extent_item *ei, u32 item_size,
+				u64 *out_root, u8 *out_level);
+
+int iterate_extent_inodes(struct btrfs_fs_info *fs_info,
+				struct btrfs_path *path,
+				u64 extent_item_objectid,
+				u64 extent_offset,
+				iterate_extent_inodes_t *iterate, void *ctx);
+
+int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info,
+				struct btrfs_path *path,
+				iterate_extent_inodes_t *iterate, void *ctx);
+
+int paths_from_inode(u64 inum, struct inode_fs_paths *ipath);
+
+struct btrfs_data_container *init_data_container(u32 total_bytes);
+struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
+					struct btrfs_path *path);
+void free_ipath(struct inode_fs_paths *ipath);
+
+#endif
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index d9f99a1..634608d2 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -103,11 +103,6 @@
 	 */
 	u64 delalloc_bytes;
 
-	/* total number of bytes that may be used for this inode for
-	 * delalloc
-	 */
-	u64 reserved_bytes;
-
 	/*
 	 * the size of the file stored in the metadata on disk.  data=ordered
 	 * means the in-memory i_size might be larger than the size on disk
@@ -115,9 +110,6 @@
 	 */
 	u64 disk_i_size;
 
-	/* flags field from the on disk inode */
-	u32 flags;
-
 	/*
 	 * if this is a directory then index_cnt is the counter for the index
 	 * number for new files that are created
@@ -132,6 +124,15 @@
 	u64 last_unlink_trans;
 
 	/*
+	 * Number of bytes outstanding that are going to need csums.  This is
+	 * used in ENOSPC accounting.
+	 */
+	u64 csum_bytes;
+
+	/* flags field from the on disk inode */
+	u32 flags;
+
+	/*
 	 * Counters to keep track of the number of extent item's we may use due
 	 * to delalloc and such.  outstanding_extents is the number of extent
 	 * items we think we'll end up using, and reserved_extents is the number
@@ -146,14 +147,12 @@
 	 * the btrfs file release call will add this inode to the
 	 * ordered operations list so that we make sure to flush out any
 	 * new data the application may have written before commit.
-	 *
-	 * yes, its silly to have a single bitflag, but we might grow more
-	 * of these.
 	 */
 	unsigned ordered_data_close:1;
 	unsigned orphan_meta_reserved:1;
 	unsigned dummy_inode:1;
 	unsigned in_defrag:1;
+	unsigned delalloc_meta_reserved:1;
 
 	/*
 	 * always compress this one file
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 8ec5d86..14f1c5a 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -85,7 +85,8 @@
 static inline int compressed_bio_size(struct btrfs_root *root,
 				      unsigned long disk_size)
 {
-	u16 csum_size = btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
+
 	return sizeof(struct compressed_bio) +
 		((disk_size + root->sectorsize - 1) / root->sectorsize) *
 		csum_size;
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 011cab3..dede441 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -514,10 +514,25 @@
 				   struct btrfs_root *root,
 				   struct extent_buffer *buf)
 {
+	/* ensure we can see the force_cow */
+	smp_rmb();
+
+	/*
+	 * We do not need to cow a block if
+	 * 1) this block is not created or changed in this transaction;
+	 * 2) this block does not belong to TREE_RELOC tree;
+	 * 3) the root is not forced COW.
+	 *
+	 * What is forced COW:
+	 *    when we create snapshot during commiting the transaction,
+	 *    after we've finished coping src root, we must COW the shared
+	 *    block to ensure the metadata consistency.
+	 */
 	if (btrfs_header_generation(buf) == trans->transid &&
 	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) &&
 	    !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID &&
-	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)) &&
+	    !root->force_cow)
 		return 0;
 	return 1;
 }
@@ -902,9 +917,10 @@
 
 	orig_ptr = btrfs_node_blockptr(mid, orig_slot);
 
-	if (level < BTRFS_MAX_LEVEL - 1)
+	if (level < BTRFS_MAX_LEVEL - 1) {
 		parent = path->nodes[level + 1];
-	pslot = path->slots[level + 1];
+		pslot = path->slots[level + 1];
+	}
 
 	/*
 	 * deal with the case where there is only one pointer in the root
@@ -1107,9 +1123,10 @@
 	mid = path->nodes[level];
 	WARN_ON(btrfs_header_generation(mid) != trans->transid);
 
-	if (level < BTRFS_MAX_LEVEL - 1)
+	if (level < BTRFS_MAX_LEVEL - 1) {
 		parent = path->nodes[level + 1];
-	pslot = path->slots[level + 1];
+		pslot = path->slots[level + 1];
+	}
 
 	if (!parent)
 		return 1;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 03912c5..50634abe 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -30,6 +30,7 @@
 #include <linux/kobject.h>
 #include <trace/events/btrfs.h>
 #include <asm/kmap_types.h>
+#include <linux/pagemap.h>
 #include "extent_io.h"
 #include "extent_map.h"
 #include "async-thread.h"
@@ -360,6 +361,47 @@
 #define BTRFS_LABEL_SIZE 256
 
 /*
+ * just in case we somehow lose the roots and are not able to mount,
+ * we store an array of the roots from previous transactions
+ * in the super.
+ */
+#define BTRFS_NUM_BACKUP_ROOTS 4
+struct btrfs_root_backup {
+	__le64 tree_root;
+	__le64 tree_root_gen;
+
+	__le64 chunk_root;
+	__le64 chunk_root_gen;
+
+	__le64 extent_root;
+	__le64 extent_root_gen;
+
+	__le64 fs_root;
+	__le64 fs_root_gen;
+
+	__le64 dev_root;
+	__le64 dev_root_gen;
+
+	__le64 csum_root;
+	__le64 csum_root_gen;
+
+	__le64 total_bytes;
+	__le64 bytes_used;
+	__le64 num_devices;
+	/* future */
+	__le64 unsed_64[4];
+
+	u8 tree_root_level;
+	u8 chunk_root_level;
+	u8 extent_root_level;
+	u8 fs_root_level;
+	u8 dev_root_level;
+	u8 csum_root_level;
+	/* future and to align */
+	u8 unused_8[10];
+} __attribute__ ((__packed__));
+
+/*
  * the super block basically lists the main trees of the FS
  * it currently lacks any block count etc etc
  */
@@ -405,6 +447,7 @@
 	/* future expansion */
 	__le64 reserved[31];
 	u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE];
+	struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS];
 } __attribute__ ((__packed__));
 
 /*
@@ -772,14 +815,8 @@
 struct btrfs_block_rsv {
 	u64 size;
 	u64 reserved;
-	u64 freed[2];
 	struct btrfs_space_info *space_info;
-	struct list_head list;
 	spinlock_t lock;
-	atomic_t usage;
-	unsigned int priority:8;
-	unsigned int durable:1;
-	unsigned int refill_used:1;
 	unsigned int full:1;
 };
 
@@ -811,7 +848,8 @@
 enum btrfs_caching_type {
 	BTRFS_CACHE_NO		= 0,
 	BTRFS_CACHE_STARTED	= 1,
-	BTRFS_CACHE_FINISHED	= 2,
+	BTRFS_CACHE_FAST	= 2,
+	BTRFS_CACHE_FINISHED	= 3,
 };
 
 enum btrfs_disk_cache_state {
@@ -840,10 +878,10 @@
 	spinlock_t lock;
 	u64 pinned;
 	u64 reserved;
-	u64 reserved_pinned;
 	u64 bytes_super;
 	u64 flags;
 	u64 sectorsize;
+	u64 cache_generation;
 	unsigned int ro:1;
 	unsigned int dirty:1;
 	unsigned int iref:1;
@@ -899,6 +937,10 @@
 	spinlock_t block_group_cache_lock;
 	struct rb_root block_group_cache_tree;
 
+	/* keep track of unallocated space */
+	spinlock_t free_chunk_lock;
+	u64 free_chunk_space;
+
 	struct extent_io_tree freed_extents[2];
 	struct extent_io_tree *pinned_extents;
 
@@ -916,14 +958,11 @@
 	struct btrfs_block_rsv trans_block_rsv;
 	/* block reservation for chunk tree */
 	struct btrfs_block_rsv chunk_block_rsv;
+	/* block reservation for delayed operations */
+	struct btrfs_block_rsv delayed_block_rsv;
 
 	struct btrfs_block_rsv empty_block_rsv;
 
-	/* list of block reservations that cross multiple transactions */
-	struct list_head durable_block_rsv_list;
-
-	struct mutex durable_block_rsv_mutex;
-
 	u64 generation;
 	u64 last_trans_committed;
 
@@ -942,8 +981,8 @@
 	wait_queue_head_t transaction_blocked_wait;
 	wait_queue_head_t async_submit_wait;
 
-	struct btrfs_super_block super_copy;
-	struct btrfs_super_block super_for_commit;
+	struct btrfs_super_block *super_copy;
+	struct btrfs_super_block *super_for_commit;
 	struct block_device *__bdev;
 	struct super_block *sb;
 	struct inode *btree_inode;
@@ -1036,6 +1075,7 @@
 	struct btrfs_workers endio_freespace_worker;
 	struct btrfs_workers submit_workers;
 	struct btrfs_workers caching_workers;
+	struct btrfs_workers readahead_workers;
 
 	/*
 	 * fixup workers take dirty pages that didn't properly go through
@@ -1119,6 +1159,13 @@
 	u64 fs_state;
 
 	struct btrfs_delayed_root *delayed_root;
+
+	/* readahead tree */
+	spinlock_t reada_lock;
+	struct radix_tree_root reada_tree;
+
+	/* next backup root to be overwritten */
+	int backup_root_index;
 };
 
 /*
@@ -1225,6 +1272,8 @@
 	 * for stat.  It may be used for more later
 	 */
 	dev_t anon_dev;
+
+	int force_cow;
 };
 
 struct btrfs_ioctl_defrag_range_args {
@@ -1363,6 +1412,7 @@
 #define BTRFS_MOUNT_ENOSPC_DEBUG	 (1 << 15)
 #define BTRFS_MOUNT_AUTO_DEFRAG		(1 << 16)
 #define BTRFS_MOUNT_INODE_MAP_CACHE	(1 << 17)
+#define BTRFS_MOUNT_RECOVERY		(1 << 18)
 
 #define btrfs_clear_opt(o, opt)		((o) &= ~BTRFS_MOUNT_##opt)
 #define btrfs_set_opt(o, opt)		((o) |= BTRFS_MOUNT_##opt)
@@ -1978,6 +2028,55 @@
 	return root->root_item.flags & BTRFS_ROOT_SUBVOL_RDONLY;
 }
 
+/* struct btrfs_root_backup */
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root, struct btrfs_root_backup,
+		   tree_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root_gen, struct btrfs_root_backup,
+		   tree_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_tree_root_level, struct btrfs_root_backup,
+		   tree_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root, struct btrfs_root_backup,
+		   chunk_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root_gen, struct btrfs_root_backup,
+		   chunk_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_chunk_root_level, struct btrfs_root_backup,
+		   chunk_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root, struct btrfs_root_backup,
+		   extent_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root_gen, struct btrfs_root_backup,
+		   extent_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_extent_root_level, struct btrfs_root_backup,
+		   extent_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root, struct btrfs_root_backup,
+		   fs_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root_gen, struct btrfs_root_backup,
+		   fs_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_fs_root_level, struct btrfs_root_backup,
+		   fs_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root, struct btrfs_root_backup,
+		   dev_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root_gen, struct btrfs_root_backup,
+		   dev_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_dev_root_level, struct btrfs_root_backup,
+		   dev_root_level, 8);
+
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root, struct btrfs_root_backup,
+		   csum_root, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root_gen, struct btrfs_root_backup,
+		   csum_root_gen, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_csum_root_level, struct btrfs_root_backup,
+		   csum_root_level, 8);
+BTRFS_SETGET_STACK_FUNCS(backup_total_bytes, struct btrfs_root_backup,
+		   total_bytes, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_bytes_used, struct btrfs_root_backup,
+		   bytes_used, 64);
+BTRFS_SETGET_STACK_FUNCS(backup_num_devices, struct btrfs_root_backup,
+		   num_devices, 64);
+
 /* struct btrfs_super_block */
 
 BTRFS_SETGET_STACK_FUNCS(super_bytenr, struct btrfs_super_block, bytenr, 64);
@@ -2129,6 +2228,11 @@
 		(space_info->flags & BTRFS_BLOCK_GROUP_DATA));
 }
 
+static inline gfp_t btrfs_alloc_write_mask(struct address_space *mapping)
+{
+	return mapping_gfp_mask(mapping) & ~__GFP_FS;
+}
+
 /* extent-tree.c */
 static inline u64 btrfs_calc_trans_metadata_size(struct btrfs_root *root,
 						 unsigned num_items)
@@ -2137,6 +2241,17 @@
 		3 * num_items;
 }
 
+/*
+ * Doing a truncate won't result in new nodes or leaves, just what we need for
+ * COW.
+ */
+static inline u64 btrfs_calc_trunc_metadata_size(struct btrfs_root *root,
+						 unsigned num_items)
+{
+	return (root->leafsize + root->nodesize * (BTRFS_MAX_LEVEL - 1)) *
+		num_items;
+}
+
 void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
 int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
 			   struct btrfs_root *root, unsigned long count);
@@ -2146,6 +2261,9 @@
 			     u64 num_bytes, u64 *refs, u64 *flags);
 int btrfs_pin_extent(struct btrfs_root *root,
 		     u64 bytenr, u64 num, int reserved);
+int btrfs_pin_extent_for_log_replay(struct btrfs_trans_handle *trans,
+				    struct btrfs_root *root,
+				    u64 bytenr, u64 num_bytes);
 int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root,
 			  u64 objectid, u64 offset, u64 bytenr);
@@ -2196,8 +2314,8 @@
 		      u64 root_objectid, u64 owner, u64 offset);
 
 int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
-int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
-				u64 num_bytes, int reserve, int sinfo);
+int btrfs_free_and_pin_reserved_extent(struct btrfs_root *root,
+				       u64 start, u64 len);
 int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root);
 int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
@@ -2240,25 +2358,26 @@
 struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root);
 void btrfs_free_block_rsv(struct btrfs_root *root,
 			  struct btrfs_block_rsv *rsv);
-void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
-				 struct btrfs_block_rsv *rsv);
-int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
-			struct btrfs_root *root,
+int btrfs_block_rsv_add(struct btrfs_root *root,
 			struct btrfs_block_rsv *block_rsv,
 			u64 num_bytes);
-int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root,
+int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
+				struct btrfs_block_rsv *block_rsv,
+				u64 num_bytes);
+int btrfs_block_rsv_check(struct btrfs_root *root,
+			  struct btrfs_block_rsv *block_rsv, int min_factor);
+int btrfs_block_rsv_refill(struct btrfs_root *root,
 			  struct btrfs_block_rsv *block_rsv,
-			  u64 min_reserved, int min_factor);
+			  u64 min_reserved);
+int btrfs_block_rsv_refill_noflush(struct btrfs_root *root,
+				   struct btrfs_block_rsv *block_rsv,
+				   u64 min_reserved);
 int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
 			    struct btrfs_block_rsv *dst_rsv,
 			    u64 num_bytes);
 void btrfs_block_rsv_release(struct btrfs_root *root,
 			     struct btrfs_block_rsv *block_rsv,
 			     u64 num_bytes);
-int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans,
-				    struct btrfs_root *root,
-				    struct btrfs_block_rsv *rsv);
 int btrfs_set_block_group_ro(struct btrfs_root *root,
 			     struct btrfs_block_group_cache *cache);
 int btrfs_set_block_group_rw(struct btrfs_root *root,
@@ -2379,6 +2498,18 @@
 	smp_mb();
 	return fs_info->closing;
 }
+static inline void free_fs_info(struct btrfs_fs_info *fs_info)
+{
+	kfree(fs_info->delayed_root);
+	kfree(fs_info->extent_root);
+	kfree(fs_info->tree_root);
+	kfree(fs_info->chunk_root);
+	kfree(fs_info->dev_root);
+	kfree(fs_info->csum_root);
+	kfree(fs_info->super_copy);
+	kfree(fs_info->super_for_commit);
+	kfree(fs_info);
+}
 
 /* root-item.c */
 int btrfs_find_root_ref(struct btrfs_root *tree_root,
@@ -2579,11 +2710,6 @@
 int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode);
 int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
 int btrfs_orphan_cleanup(struct btrfs_root *root);
-void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
-				struct btrfs_pending_snapshot *pending,
-				u64 *bytes_to_reserve);
-void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
-				struct btrfs_pending_snapshot *pending);
 void btrfs_orphan_commit_root(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root);
 int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size);
@@ -2697,4 +2823,20 @@
 int btrfs_scrub_progress(struct btrfs_root *root, u64 devid,
 			 struct btrfs_scrub_progress *progress);
 
+/* reada.c */
+struct reada_control {
+	struct btrfs_root	*root;		/* tree to prefetch */
+	struct btrfs_key	key_start;
+	struct btrfs_key	key_end;	/* exclusive */
+	atomic_t		elems;
+	struct kref		refcnt;
+	wait_queue_head_t	wait;
+};
+struct reada_control *btrfs_reada_add(struct btrfs_root *root,
+			      struct btrfs_key *start, struct btrfs_key *end);
+int btrfs_reada_wait(void *handle);
+void btrfs_reada_detach(void *handle);
+int btree_readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+			 u64 start, int err);
+
 #endif
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index ae4d9cd..5b16357 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -591,7 +591,7 @@
 		return 0;
 
 	src_rsv = trans->block_rsv;
-	dst_rsv = &root->fs_info->global_block_rsv;
+	dst_rsv = &root->fs_info->delayed_block_rsv;
 
 	num_bytes = btrfs_calc_trans_metadata_size(root, 1);
 	ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
@@ -609,7 +609,7 @@
 	if (!item->bytes_reserved)
 		return;
 
-	rsv = &root->fs_info->global_block_rsv;
+	rsv = &root->fs_info->delayed_block_rsv;
 	btrfs_block_rsv_release(root, rsv,
 				item->bytes_reserved);
 }
@@ -617,24 +617,102 @@
 static int btrfs_delayed_inode_reserve_metadata(
 					struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
+					struct inode *inode,
 					struct btrfs_delayed_node *node)
 {
 	struct btrfs_block_rsv *src_rsv;
 	struct btrfs_block_rsv *dst_rsv;
 	u64 num_bytes;
 	int ret;
-
-	if (!trans->bytes_reserved)
-		return 0;
+	int release = false;
 
 	src_rsv = trans->block_rsv;
-	dst_rsv = &root->fs_info->global_block_rsv;
+	dst_rsv = &root->fs_info->delayed_block_rsv;
 
 	num_bytes = btrfs_calc_trans_metadata_size(root, 1);
+
+	/*
+	 * btrfs_dirty_inode will update the inode under btrfs_join_transaction
+	 * which doesn't reserve space for speed.  This is a problem since we
+	 * still need to reserve space for this update, so try to reserve the
+	 * space.
+	 *
+	 * Now if src_rsv == delalloc_block_rsv we'll let it just steal since
+	 * we're accounted for.
+	 */
+	if (!trans->bytes_reserved &&
+	    src_rsv != &root->fs_info->delalloc_block_rsv) {
+		ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+		/*
+		 * Since we're under a transaction reserve_metadata_bytes could
+		 * try to commit the transaction which will make it return
+		 * EAGAIN to make us stop the transaction we have, so return
+		 * ENOSPC instead so that btrfs_dirty_inode knows what to do.
+		 */
+		if (ret == -EAGAIN)
+			ret = -ENOSPC;
+		if (!ret)
+			node->bytes_reserved = num_bytes;
+		return ret;
+	} else if (src_rsv == &root->fs_info->delalloc_block_rsv) {
+		spin_lock(&BTRFS_I(inode)->lock);
+		if (BTRFS_I(inode)->delalloc_meta_reserved) {
+			BTRFS_I(inode)->delalloc_meta_reserved = 0;
+			spin_unlock(&BTRFS_I(inode)->lock);
+			release = true;
+			goto migrate;
+		}
+		spin_unlock(&BTRFS_I(inode)->lock);
+
+		/* Ok we didn't have space pre-reserved.  This shouldn't happen
+		 * too often but it can happen if we do delalloc to an existing
+		 * inode which gets dirtied because of the time update, and then
+		 * isn't touched again until after the transaction commits and
+		 * then we try to write out the data.  First try to be nice and
+		 * reserve something strictly for us.  If not be a pain and try
+		 * to steal from the delalloc block rsv.
+		 */
+		ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+		if (!ret)
+			goto out;
+
+		ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+		if (!ret)
+			goto out;
+
+		/*
+		 * Ok this is a problem, let's just steal from the global rsv
+		 * since this really shouldn't happen that often.
+		 */
+		WARN_ON(1);
+		ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv,
+					      dst_rsv, num_bytes);
+		goto out;
+	}
+
+migrate:
 	ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+
+out:
+	/*
+	 * Migrate only takes a reservation, it doesn't touch the size of the
+	 * block_rsv.  This is to simplify people who don't normally have things
+	 * migrated from their block rsv.  If they go to release their
+	 * reservation, that will decrease the size as well, so if migrate
+	 * reduced size we'd end up with a negative size.  But for the
+	 * delalloc_meta_reserved stuff we will only know to drop 1 reservation,
+	 * but we could in fact do this reserve/migrate dance several times
+	 * between the time we did the original reservation and we'd clean it
+	 * up.  So to take care of this, release the space for the meta
+	 * reservation here.  I think it may be time for a documentation page on
+	 * how block rsvs. work.
+	 */
 	if (!ret)
 		node->bytes_reserved = num_bytes;
 
+	if (release)
+		btrfs_block_rsv_release(root, src_rsv, num_bytes);
+
 	return ret;
 }
 
@@ -646,7 +724,7 @@
 	if (!node->bytes_reserved)
 		return;
 
-	rsv = &root->fs_info->global_block_rsv;
+	rsv = &root->fs_info->delayed_block_rsv;
 	btrfs_block_rsv_release(root, rsv,
 				node->bytes_reserved);
 	node->bytes_reserved = 0;
@@ -1026,7 +1104,7 @@
 	path->leave_spinning = 1;
 
 	block_rsv = trans->block_rsv;
-	trans->block_rsv = &root->fs_info->global_block_rsv;
+	trans->block_rsv = &root->fs_info->delayed_block_rsv;
 
 	delayed_root = btrfs_get_delayed_root(root);
 
@@ -1069,7 +1147,7 @@
 	path->leave_spinning = 1;
 
 	block_rsv = trans->block_rsv;
-	trans->block_rsv = &node->root->fs_info->global_block_rsv;
+	trans->block_rsv = &node->root->fs_info->delayed_block_rsv;
 
 	ret = btrfs_insert_delayed_items(trans, path, node->root, node);
 	if (!ret)
@@ -1149,7 +1227,7 @@
 		goto free_path;
 
 	block_rsv = trans->block_rsv;
-	trans->block_rsv = &root->fs_info->global_block_rsv;
+	trans->block_rsv = &root->fs_info->delayed_block_rsv;
 
 	ret = btrfs_insert_delayed_items(trans, path, root, delayed_node);
 	if (!ret)
@@ -1685,12 +1763,10 @@
 		goto release_node;
 	}
 
-	ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node);
-	/*
-	 * we must reserve enough space when we start a new transaction,
-	 * so reserving metadata failure is impossible
-	 */
-	BUG_ON(ret);
+	ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode,
+						   delayed_node);
+	if (ret)
+		goto release_node;
 
 	fill_stack_inode_item(trans, &delayed_node->inode_item, inode);
 	delayed_node->inode_dirty = 1;
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 07ea918..632f8f3 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -256,8 +256,7 @@
 static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf,
 			   int verify)
 {
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 	char *result = NULL;
 	unsigned long len;
 	unsigned long cur_len;
@@ -367,7 +366,8 @@
 	clear_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags);
 	io_tree = &BTRFS_I(root->fs_info->btree_inode)->io_tree;
 	while (1) {
-		ret = read_extent_buffer_pages(io_tree, eb, start, 1,
+		ret = read_extent_buffer_pages(io_tree, eb, start,
+					       WAIT_COMPLETE,
 					       btree_get_extent, mirror_num);
 		if (!ret &&
 		    !verify_parent_transid(io_tree, eb, parent_transid))
@@ -608,11 +608,48 @@
 	end = min_t(u64, eb->len, PAGE_CACHE_SIZE);
 	end = eb->start + end - 1;
 err:
+	if (test_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) {
+		clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags);
+		btree_readahead_hook(root, eb, eb->start, ret);
+	}
+
 	free_extent_buffer(eb);
 out:
 	return ret;
 }
 
+static int btree_io_failed_hook(struct bio *failed_bio,
+			 struct page *page, u64 start, u64 end,
+			 int mirror_num, struct extent_state *state)
+{
+	struct extent_io_tree *tree;
+	unsigned long len;
+	struct extent_buffer *eb;
+	struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
+
+	tree = &BTRFS_I(page->mapping->host)->io_tree;
+	if (page->private == EXTENT_PAGE_PRIVATE)
+		goto out;
+	if (!page->private)
+		goto out;
+
+	len = page->private >> 2;
+	WARN_ON(len == 0);
+
+	eb = alloc_extent_buffer(tree, start, len, page);
+	if (eb == NULL)
+		goto out;
+
+	if (test_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) {
+		clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags);
+		btree_readahead_hook(root, eb, eb->start, -EIO);
+	}
+	free_extent_buffer(eb);
+
+out:
+	return -EIO;	/* we fixed nothing */
+}
+
 static void end_workqueue_bio(struct bio *bio, int err)
 {
 	struct end_io_wq *end_io_wq = bio->bi_private;
@@ -908,7 +945,7 @@
 {
 	struct extent_io_tree *tree;
 	tree = &BTRFS_I(page->mapping->host)->io_tree;
-	return extent_read_full_page(tree, page, btree_get_extent);
+	return extent_read_full_page(tree, page, btree_get_extent, 0);
 }
 
 static int btree_releasepage(struct page *page, gfp_t gfp_flags)
@@ -974,11 +1011,43 @@
 	if (!buf)
 		return 0;
 	read_extent_buffer_pages(&BTRFS_I(btree_inode)->io_tree,
-				 buf, 0, 0, btree_get_extent, 0);
+				 buf, 0, WAIT_NONE, btree_get_extent, 0);
 	free_extent_buffer(buf);
 	return ret;
 }
 
+int reada_tree_block_flagged(struct btrfs_root *root, u64 bytenr, u32 blocksize,
+			 int mirror_num, struct extent_buffer **eb)
+{
+	struct extent_buffer *buf = NULL;
+	struct inode *btree_inode = root->fs_info->btree_inode;
+	struct extent_io_tree *io_tree = &BTRFS_I(btree_inode)->io_tree;
+	int ret;
+
+	buf = btrfs_find_create_tree_block(root, bytenr, blocksize);
+	if (!buf)
+		return 0;
+
+	set_bit(EXTENT_BUFFER_READAHEAD, &buf->bflags);
+
+	ret = read_extent_buffer_pages(io_tree, buf, 0, WAIT_PAGE_LOCK,
+				       btree_get_extent, mirror_num);
+	if (ret) {
+		free_extent_buffer(buf);
+		return ret;
+	}
+
+	if (test_bit(EXTENT_BUFFER_CORRUPT, &buf->bflags)) {
+		free_extent_buffer(buf);
+		return -EIO;
+	} else if (extent_buffer_uptodate(io_tree, buf, NULL)) {
+		*eb = buf;
+	} else {
+		free_extent_buffer(buf);
+	}
+	return 0;
+}
+
 struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root,
 					    u64 bytenr, u32 blocksize)
 {
@@ -1135,10 +1204,12 @@
 
 	generation = btrfs_root_generation(&root->root_item);
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
+	root->commit_root = NULL;
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
 	if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
 		free_extent_buffer(root->node);
+		root->node = NULL;
 		return -EIO;
 	}
 	root->commit_root = btrfs_root_node(root);
@@ -1577,6 +1648,235 @@
 	return 0;
 }
 
+/*
+ * this will find the highest generation in the array of
+ * root backups.  The index of the highest array is returned,
+ * or -1 if we can't find anything.
+ *
+ * We check to make sure the array is valid by comparing the
+ * generation of the latest  root in the array with the generation
+ * in the super block.  If they don't match we pitch it.
+ */
+static int find_newest_super_backup(struct btrfs_fs_info *info, u64 newest_gen)
+{
+	u64 cur;
+	int newest_index = -1;
+	struct btrfs_root_backup *root_backup;
+	int i;
+
+	for (i = 0; i < BTRFS_NUM_BACKUP_ROOTS; i++) {
+		root_backup = info->super_copy->super_roots + i;
+		cur = btrfs_backup_tree_root_gen(root_backup);
+		if (cur == newest_gen)
+			newest_index = i;
+	}
+
+	/* check to see if we actually wrapped around */
+	if (newest_index == BTRFS_NUM_BACKUP_ROOTS - 1) {
+		root_backup = info->super_copy->super_roots;
+		cur = btrfs_backup_tree_root_gen(root_backup);
+		if (cur == newest_gen)
+			newest_index = 0;
+	}
+	return newest_index;
+}
+
+
+/*
+ * find the oldest backup so we know where to store new entries
+ * in the backup array.  This will set the backup_root_index
+ * field in the fs_info struct
+ */
+static void find_oldest_super_backup(struct btrfs_fs_info *info,
+				     u64 newest_gen)
+{
+	int newest_index = -1;
+
+	newest_index = find_newest_super_backup(info, newest_gen);
+	/* if there was garbage in there, just move along */
+	if (newest_index == -1) {
+		info->backup_root_index = 0;
+	} else {
+		info->backup_root_index = (newest_index + 1) % BTRFS_NUM_BACKUP_ROOTS;
+	}
+}
+
+/*
+ * copy all the root pointers into the super backup array.
+ * this will bump the backup pointer by one when it is
+ * done
+ */
+static void backup_super_roots(struct btrfs_fs_info *info)
+{
+	int next_backup;
+	struct btrfs_root_backup *root_backup;
+	int last_backup;
+
+	next_backup = info->backup_root_index;
+	last_backup = (next_backup + BTRFS_NUM_BACKUP_ROOTS - 1) %
+		BTRFS_NUM_BACKUP_ROOTS;
+
+	/*
+	 * just overwrite the last backup if we're at the same generation
+	 * this happens only at umount
+	 */
+	root_backup = info->super_for_commit->super_roots + last_backup;
+	if (btrfs_backup_tree_root_gen(root_backup) ==
+	    btrfs_header_generation(info->tree_root->node))
+		next_backup = last_backup;
+
+	root_backup = info->super_for_commit->super_roots + next_backup;
+
+	/*
+	 * make sure all of our padding and empty slots get zero filled
+	 * regardless of which ones we use today
+	 */
+	memset(root_backup, 0, sizeof(*root_backup));
+
+	info->backup_root_index = (next_backup + 1) % BTRFS_NUM_BACKUP_ROOTS;
+
+	btrfs_set_backup_tree_root(root_backup, info->tree_root->node->start);
+	btrfs_set_backup_tree_root_gen(root_backup,
+			       btrfs_header_generation(info->tree_root->node));
+
+	btrfs_set_backup_tree_root_level(root_backup,
+			       btrfs_header_level(info->tree_root->node));
+
+	btrfs_set_backup_chunk_root(root_backup, info->chunk_root->node->start);
+	btrfs_set_backup_chunk_root_gen(root_backup,
+			       btrfs_header_generation(info->chunk_root->node));
+	btrfs_set_backup_chunk_root_level(root_backup,
+			       btrfs_header_level(info->chunk_root->node));
+
+	btrfs_set_backup_extent_root(root_backup, info->extent_root->node->start);
+	btrfs_set_backup_extent_root_gen(root_backup,
+			       btrfs_header_generation(info->extent_root->node));
+	btrfs_set_backup_extent_root_level(root_backup,
+			       btrfs_header_level(info->extent_root->node));
+
+	/*
+	 * we might commit during log recovery, which happens before we set
+	 * the fs_root.  Make sure it is valid before we fill it in.
+	 */
+	if (info->fs_root && info->fs_root->node) {
+		btrfs_set_backup_fs_root(root_backup,
+					 info->fs_root->node->start);
+		btrfs_set_backup_fs_root_gen(root_backup,
+			       btrfs_header_generation(info->fs_root->node));
+		btrfs_set_backup_fs_root_level(root_backup,
+			       btrfs_header_level(info->fs_root->node));
+	}
+
+	btrfs_set_backup_dev_root(root_backup, info->dev_root->node->start);
+	btrfs_set_backup_dev_root_gen(root_backup,
+			       btrfs_header_generation(info->dev_root->node));
+	btrfs_set_backup_dev_root_level(root_backup,
+				       btrfs_header_level(info->dev_root->node));
+
+	btrfs_set_backup_csum_root(root_backup, info->csum_root->node->start);
+	btrfs_set_backup_csum_root_gen(root_backup,
+			       btrfs_header_generation(info->csum_root->node));
+	btrfs_set_backup_csum_root_level(root_backup,
+			       btrfs_header_level(info->csum_root->node));
+
+	btrfs_set_backup_total_bytes(root_backup,
+			     btrfs_super_total_bytes(info->super_copy));
+	btrfs_set_backup_bytes_used(root_backup,
+			     btrfs_super_bytes_used(info->super_copy));
+	btrfs_set_backup_num_devices(root_backup,
+			     btrfs_super_num_devices(info->super_copy));
+
+	/*
+	 * if we don't copy this out to the super_copy, it won't get remembered
+	 * for the next commit
+	 */
+	memcpy(&info->super_copy->super_roots,
+	       &info->super_for_commit->super_roots,
+	       sizeof(*root_backup) * BTRFS_NUM_BACKUP_ROOTS);
+}
+
+/*
+ * this copies info out of the root backup array and back into
+ * the in-memory super block.  It is meant to help iterate through
+ * the array, so you send it the number of backups you've already
+ * tried and the last backup index you used.
+ *
+ * this returns -1 when it has tried all the backups
+ */
+static noinline int next_root_backup(struct btrfs_fs_info *info,
+				     struct btrfs_super_block *super,
+				     int *num_backups_tried, int *backup_index)
+{
+	struct btrfs_root_backup *root_backup;
+	int newest = *backup_index;
+
+	if (*num_backups_tried == 0) {
+		u64 gen = btrfs_super_generation(super);
+
+		newest = find_newest_super_backup(info, gen);
+		if (newest == -1)
+			return -1;
+
+		*backup_index = newest;
+		*num_backups_tried = 1;
+	} else if (*num_backups_tried == BTRFS_NUM_BACKUP_ROOTS) {
+		/* we've tried all the backups, all done */
+		return -1;
+	} else {
+		/* jump to the next oldest backup */
+		newest = (*backup_index + BTRFS_NUM_BACKUP_ROOTS - 1) %
+			BTRFS_NUM_BACKUP_ROOTS;
+		*backup_index = newest;
+		*num_backups_tried += 1;
+	}
+	root_backup = super->super_roots + newest;
+
+	btrfs_set_super_generation(super,
+				   btrfs_backup_tree_root_gen(root_backup));
+	btrfs_set_super_root(super, btrfs_backup_tree_root(root_backup));
+	btrfs_set_super_root_level(super,
+				   btrfs_backup_tree_root_level(root_backup));
+	btrfs_set_super_bytes_used(super, btrfs_backup_bytes_used(root_backup));
+
+	/*
+	 * fixme: the total bytes and num_devices need to match or we should
+	 * need a fsck
+	 */
+	btrfs_set_super_total_bytes(super, btrfs_backup_total_bytes(root_backup));
+	btrfs_set_super_num_devices(super, btrfs_backup_num_devices(root_backup));
+	return 0;
+}
+
+/* helper to cleanup tree roots */
+static void free_root_pointers(struct btrfs_fs_info *info, int chunk_root)
+{
+	free_extent_buffer(info->tree_root->node);
+	free_extent_buffer(info->tree_root->commit_root);
+	free_extent_buffer(info->dev_root->node);
+	free_extent_buffer(info->dev_root->commit_root);
+	free_extent_buffer(info->extent_root->node);
+	free_extent_buffer(info->extent_root->commit_root);
+	free_extent_buffer(info->csum_root->node);
+	free_extent_buffer(info->csum_root->commit_root);
+
+	info->tree_root->node = NULL;
+	info->tree_root->commit_root = NULL;
+	info->dev_root->node = NULL;
+	info->dev_root->commit_root = NULL;
+	info->extent_root->node = NULL;
+	info->extent_root->commit_root = NULL;
+	info->csum_root->node = NULL;
+	info->csum_root->commit_root = NULL;
+
+	if (chunk_root) {
+		free_extent_buffer(info->chunk_root->node);
+		free_extent_buffer(info->chunk_root->commit_root);
+		info->chunk_root->node = NULL;
+		info->chunk_root->commit_root = NULL;
+	}
+}
+
+
 struct btrfs_root *open_ctree(struct super_block *sb,
 			      struct btrfs_fs_devices *fs_devices,
 			      char *options)
@@ -1590,29 +1890,32 @@
 	u64 features;
 	struct btrfs_key location;
 	struct buffer_head *bh;
-	struct btrfs_root *extent_root = kzalloc(sizeof(struct btrfs_root),
-						 GFP_NOFS);
-	struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
-						 GFP_NOFS);
+	struct btrfs_super_block *disk_super;
 	struct btrfs_root *tree_root = btrfs_sb(sb);
-	struct btrfs_fs_info *fs_info = NULL;
-	struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
-						GFP_NOFS);
-	struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
-					      GFP_NOFS);
+	struct btrfs_fs_info *fs_info = tree_root->fs_info;
+	struct btrfs_root *extent_root;
+	struct btrfs_root *csum_root;
+	struct btrfs_root *chunk_root;
+	struct btrfs_root *dev_root;
 	struct btrfs_root *log_tree_root;
-
 	int ret;
 	int err = -EINVAL;
+	int num_backups_tried = 0;
+	int backup_index = 0;
 
-	struct btrfs_super_block *disk_super;
+	extent_root = fs_info->extent_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	csum_root = fs_info->csum_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	chunk_root = fs_info->chunk_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	dev_root = fs_info->dev_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
 
-	if (!extent_root || !tree_root || !tree_root->fs_info ||
-	    !chunk_root || !dev_root || !csum_root) {
+	if (!extent_root || !csum_root || !chunk_root || !dev_root) {
 		err = -ENOMEM;
 		goto fail;
 	}
-	fs_info = tree_root->fs_info;
 
 	ret = init_srcu_struct(&fs_info->subvol_srcu);
 	if (ret) {
@@ -1648,15 +1951,10 @@
 	spin_lock_init(&fs_info->fs_roots_radix_lock);
 	spin_lock_init(&fs_info->delayed_iput_lock);
 	spin_lock_init(&fs_info->defrag_inodes_lock);
+	spin_lock_init(&fs_info->free_chunk_lock);
 	mutex_init(&fs_info->reloc_mutex);
 
 	init_completion(&fs_info->kobj_unregister);
-	fs_info->tree_root = tree_root;
-	fs_info->extent_root = extent_root;
-	fs_info->csum_root = csum_root;
-	fs_info->chunk_root = chunk_root;
-	fs_info->dev_root = dev_root;
-	fs_info->fs_devices = fs_devices;
 	INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots);
 	INIT_LIST_HEAD(&fs_info->space_info);
 	btrfs_mapping_init(&fs_info->mapping_tree);
@@ -1665,8 +1963,7 @@
 	btrfs_init_block_rsv(&fs_info->trans_block_rsv);
 	btrfs_init_block_rsv(&fs_info->chunk_block_rsv);
 	btrfs_init_block_rsv(&fs_info->empty_block_rsv);
-	INIT_LIST_HEAD(&fs_info->durable_block_rsv_list);
-	mutex_init(&fs_info->durable_block_rsv_mutex);
+	btrfs_init_block_rsv(&fs_info->delayed_block_rsv);
 	atomic_set(&fs_info->nr_async_submits, 0);
 	atomic_set(&fs_info->async_delalloc_pages, 0);
 	atomic_set(&fs_info->async_submit_draining, 0);
@@ -1677,6 +1974,11 @@
 	fs_info->metadata_ratio = 0;
 	fs_info->defrag_inodes = RB_ROOT;
 	fs_info->trans_no_join = 0;
+	fs_info->free_chunk_space = 0;
+
+	/* readahead state */
+	INIT_RADIX_TREE(&fs_info->reada_tree, GFP_NOFS & ~__GFP_WAIT);
+	spin_lock_init(&fs_info->reada_lock);
 
 	fs_info->thread_pool_size = min_t(unsigned long,
 					  num_online_cpus() + 2, 8);
@@ -1766,14 +2068,14 @@
 		goto fail_alloc;
 	}
 
-	memcpy(&fs_info->super_copy, bh->b_data, sizeof(fs_info->super_copy));
-	memcpy(&fs_info->super_for_commit, &fs_info->super_copy,
-	       sizeof(fs_info->super_for_commit));
+	memcpy(fs_info->super_copy, bh->b_data, sizeof(*fs_info->super_copy));
+	memcpy(fs_info->super_for_commit, fs_info->super_copy,
+	       sizeof(*fs_info->super_for_commit));
 	brelse(bh);
 
-	memcpy(fs_info->fsid, fs_info->super_copy.fsid, BTRFS_FSID_SIZE);
+	memcpy(fs_info->fsid, fs_info->super_copy->fsid, BTRFS_FSID_SIZE);
 
-	disk_super = &fs_info->super_copy;
+	disk_super = fs_info->super_copy;
 	if (!btrfs_super_root(disk_super))
 		goto fail_alloc;
 
@@ -1783,6 +2085,13 @@
 	btrfs_check_super_valid(fs_info, sb->s_flags & MS_RDONLY);
 
 	/*
+	 * run through our array of backup supers and setup
+	 * our ring pointer to the oldest one
+	 */
+	generation = btrfs_super_generation(disk_super);
+	find_oldest_super_backup(fs_info, generation);
+
+	/*
 	 * In the long term, we'll store the compression type in the super
 	 * block, and it'll be used for per file compression control.
 	 */
@@ -1870,6 +2179,9 @@
 	btrfs_init_workers(&fs_info->delayed_workers, "delayed-meta",
 			   fs_info->thread_pool_size,
 			   &fs_info->generic_worker);
+	btrfs_init_workers(&fs_info->readahead_workers, "readahead",
+			   fs_info->thread_pool_size,
+			   &fs_info->generic_worker);
 
 	/*
 	 * endios are largely parallel and should have a very
@@ -1880,6 +2192,7 @@
 
 	fs_info->endio_write_workers.idle_thresh = 2;
 	fs_info->endio_meta_write_workers.idle_thresh = 2;
+	fs_info->readahead_workers.idle_thresh = 2;
 
 	btrfs_start_workers(&fs_info->workers, 1);
 	btrfs_start_workers(&fs_info->generic_worker, 1);
@@ -1893,6 +2206,7 @@
 	btrfs_start_workers(&fs_info->endio_freespace_worker, 1);
 	btrfs_start_workers(&fs_info->delayed_workers, 1);
 	btrfs_start_workers(&fs_info->caching_workers, 1);
+	btrfs_start_workers(&fs_info->readahead_workers, 1);
 
 	fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
 	fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
@@ -1939,7 +2253,7 @@
 	if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
 		printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
 		       sb->s_id);
-		goto fail_chunk_root;
+		goto fail_tree_roots;
 	}
 	btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
 	chunk_root->commit_root = btrfs_root_node(chunk_root);
@@ -1954,11 +2268,12 @@
 	if (ret) {
 		printk(KERN_WARNING "btrfs: failed to read chunk tree on %s\n",
 		       sb->s_id);
-		goto fail_chunk_root;
+		goto fail_tree_roots;
 	}
 
 	btrfs_close_extra_devices(fs_devices);
 
+retry_root_backup:
 	blocksize = btrfs_level_size(tree_root,
 				     btrfs_super_root_level(disk_super));
 	generation = btrfs_super_generation(disk_super);
@@ -1966,32 +2281,33 @@
 	tree_root->node = read_tree_block(tree_root,
 					  btrfs_super_root(disk_super),
 					  blocksize, generation);
-	if (!tree_root->node)
-		goto fail_chunk_root;
-	if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+	if (!tree_root->node ||
+	    !test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
 		printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
 		       sb->s_id);
-		goto fail_tree_root;
+
+		goto recovery_tree_root;
 	}
+
 	btrfs_set_root_node(&tree_root->root_item, tree_root->node);
 	tree_root->commit_root = btrfs_root_node(tree_root);
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_EXTENT_TREE_OBJECTID, extent_root);
 	if (ret)
-		goto fail_tree_root;
+		goto recovery_tree_root;
 	extent_root->track_dirty = 1;
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_DEV_TREE_OBJECTID, dev_root);
 	if (ret)
-		goto fail_extent_root;
+		goto recovery_tree_root;
 	dev_root->track_dirty = 1;
 
 	ret = find_and_setup_root(tree_root, fs_info,
 				  BTRFS_CSUM_TREE_OBJECTID, csum_root);
 	if (ret)
-		goto fail_dev_root;
+		goto recovery_tree_root;
 
 	csum_root->track_dirty = 1;
 
@@ -2124,22 +2440,13 @@
 
 fail_block_groups:
 	btrfs_free_block_groups(fs_info);
-	free_extent_buffer(csum_root->node);
-	free_extent_buffer(csum_root->commit_root);
-fail_dev_root:
-	free_extent_buffer(dev_root->node);
-	free_extent_buffer(dev_root->commit_root);
-fail_extent_root:
-	free_extent_buffer(extent_root->node);
-	free_extent_buffer(extent_root->commit_root);
-fail_tree_root:
-	free_extent_buffer(tree_root->node);
-	free_extent_buffer(tree_root->commit_root);
-fail_chunk_root:
-	free_extent_buffer(chunk_root->node);
-	free_extent_buffer(chunk_root->commit_root);
+
+fail_tree_roots:
+	free_root_pointers(fs_info, 1);
+
 fail_sb_buffer:
 	btrfs_stop_workers(&fs_info->generic_worker);
+	btrfs_stop_workers(&fs_info->readahead_workers);
 	btrfs_stop_workers(&fs_info->fixup_workers);
 	btrfs_stop_workers(&fs_info->delalloc_workers);
 	btrfs_stop_workers(&fs_info->workers);
@@ -2152,25 +2459,37 @@
 	btrfs_stop_workers(&fs_info->delayed_workers);
 	btrfs_stop_workers(&fs_info->caching_workers);
 fail_alloc:
-	kfree(fs_info->delayed_root);
 fail_iput:
+	btrfs_mapping_tree_free(&fs_info->mapping_tree);
+
 	invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
 	iput(fs_info->btree_inode);
-
-	btrfs_close_devices(fs_info->fs_devices);
-	btrfs_mapping_tree_free(&fs_info->mapping_tree);
 fail_bdi:
 	bdi_destroy(&fs_info->bdi);
 fail_srcu:
 	cleanup_srcu_struct(&fs_info->subvol_srcu);
 fail:
-	kfree(extent_root);
-	kfree(tree_root);
-	kfree(fs_info);
-	kfree(chunk_root);
-	kfree(dev_root);
-	kfree(csum_root);
+	btrfs_close_devices(fs_info->fs_devices);
+	free_fs_info(fs_info);
 	return ERR_PTR(err);
+
+recovery_tree_root:
+	if (!btrfs_test_opt(tree_root, RECOVERY))
+		goto fail_tree_roots;
+
+	free_root_pointers(fs_info, 0);
+
+	/* don't use the log in recovery mode, it won't be valid */
+	btrfs_set_super_log_root(disk_super, 0);
+
+	/* we can't trust the free space cache either */
+	btrfs_set_opt(fs_info->mount_opt, CLEAR_CACHE);
+
+	ret = next_root_backup(fs_info, fs_info->super_copy,
+			       &num_backups_tried, &backup_index);
+	if (ret == -1)
+		goto fail_block_groups;
+	goto retry_root_backup;
 }
 
 static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate)
@@ -2254,22 +2573,10 @@
 	int errors = 0;
 	u32 crc;
 	u64 bytenr;
-	int last_barrier = 0;
 
 	if (max_mirrors == 0)
 		max_mirrors = BTRFS_SUPER_MIRROR_MAX;
 
-	/* make sure only the last submit_bh does a barrier */
-	if (do_barriers) {
-		for (i = 0; i < max_mirrors; i++) {
-			bytenr = btrfs_sb_offset(i);
-			if (bytenr + BTRFS_SUPER_INFO_SIZE >=
-			    device->total_bytes)
-				break;
-			last_barrier = i;
-		}
-	}
-
 	for (i = 0; i < max_mirrors; i++) {
 		bytenr = btrfs_sb_offset(i);
 		if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes)
@@ -2315,17 +2622,136 @@
 			bh->b_end_io = btrfs_end_buffer_write_sync;
 		}
 
-		if (i == last_barrier && do_barriers)
-			ret = submit_bh(WRITE_FLUSH_FUA, bh);
-		else
-			ret = submit_bh(WRITE_SYNC, bh);
-
+		/*
+		 * we fua the first super.  The others we allow
+		 * to go down lazy.
+		 */
+		ret = submit_bh(WRITE_FUA, bh);
 		if (ret)
 			errors++;
 	}
 	return errors < i ? 0 : -1;
 }
 
+/*
+ * endio for the write_dev_flush, this will wake anyone waiting
+ * for the barrier when it is done
+ */
+static void btrfs_end_empty_barrier(struct bio *bio, int err)
+{
+	if (err) {
+		if (err == -EOPNOTSUPP)
+			set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);
+		clear_bit(BIO_UPTODATE, &bio->bi_flags);
+	}
+	if (bio->bi_private)
+		complete(bio->bi_private);
+	bio_put(bio);
+}
+
+/*
+ * trigger flushes for one the devices.  If you pass wait == 0, the flushes are
+ * sent down.  With wait == 1, it waits for the previous flush.
+ *
+ * any device where the flush fails with eopnotsupp are flagged as not-barrier
+ * capable
+ */
+static int write_dev_flush(struct btrfs_device *device, int wait)
+{
+	struct bio *bio;
+	int ret = 0;
+
+	if (device->nobarriers)
+		return 0;
+
+	if (wait) {
+		bio = device->flush_bio;
+		if (!bio)
+			return 0;
+
+		wait_for_completion(&device->flush_wait);
+
+		if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
+			printk("btrfs: disabling barriers on dev %s\n",
+			       device->name);
+			device->nobarriers = 1;
+		}
+		if (!bio_flagged(bio, BIO_UPTODATE)) {
+			ret = -EIO;
+		}
+
+		/* drop the reference from the wait == 0 run */
+		bio_put(bio);
+		device->flush_bio = NULL;
+
+		return ret;
+	}
+
+	/*
+	 * one reference for us, and we leave it for the
+	 * caller
+	 */
+	device->flush_bio = NULL;;
+	bio = bio_alloc(GFP_NOFS, 0);
+	if (!bio)
+		return -ENOMEM;
+
+	bio->bi_end_io = btrfs_end_empty_barrier;
+	bio->bi_bdev = device->bdev;
+	init_completion(&device->flush_wait);
+	bio->bi_private = &device->flush_wait;
+	device->flush_bio = bio;
+
+	bio_get(bio);
+	submit_bio(WRITE_FLUSH, bio);
+
+	return 0;
+}
+
+/*
+ * send an empty flush down to each device in parallel,
+ * then wait for them
+ */
+static int barrier_all_devices(struct btrfs_fs_info *info)
+{
+	struct list_head *head;
+	struct btrfs_device *dev;
+	int errors = 0;
+	int ret;
+
+	/* send down all the barriers */
+	head = &info->fs_devices->devices;
+	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (!dev->bdev) {
+			errors++;
+			continue;
+		}
+		if (!dev->in_fs_metadata || !dev->writeable)
+			continue;
+
+		ret = write_dev_flush(dev, 0);
+		if (ret)
+			errors++;
+	}
+
+	/* wait for all the barriers */
+	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (!dev->bdev) {
+			errors++;
+			continue;
+		}
+		if (!dev->in_fs_metadata || !dev->writeable)
+			continue;
+
+		ret = write_dev_flush(dev, 1);
+		if (ret)
+			errors++;
+	}
+	if (errors)
+		return -EIO;
+	return 0;
+}
+
 int write_all_supers(struct btrfs_root *root, int max_mirrors)
 {
 	struct list_head *head;
@@ -2338,14 +2764,19 @@
 	int total_errors = 0;
 	u64 flags;
 
-	max_errors = btrfs_super_num_devices(&root->fs_info->super_copy) - 1;
+	max_errors = btrfs_super_num_devices(root->fs_info->super_copy) - 1;
 	do_barriers = !btrfs_test_opt(root, NOBARRIER);
+	backup_super_roots(root->fs_info);
 
-	sb = &root->fs_info->super_for_commit;
+	sb = root->fs_info->super_for_commit;
 	dev_item = &sb->dev_item;
 
 	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	head = &root->fs_info->fs_devices->devices;
+
+	if (do_barriers)
+		barrier_all_devices(root->fs_info);
+
 	list_for_each_entry_rcu(dev, head, dev_list) {
 		if (!dev->bdev) {
 			total_errors++;
@@ -2545,8 +2976,6 @@
 	/* clear out the rbtree of defraggable inodes */
 	btrfs_run_defrag_inodes(root->fs_info);
 
-	btrfs_put_block_group_cache(fs_info);
-
 	/*
 	 * Here come 2 situations when btrfs is broken to flip readonly:
 	 *
@@ -2572,6 +3001,8 @@
 			printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
 	}
 
+	btrfs_put_block_group_cache(fs_info);
+
 	kthread_stop(root->fs_info->transaction_kthread);
 	kthread_stop(root->fs_info->cleaner_kthread);
 
@@ -2603,7 +3034,6 @@
 	del_fs_roots(fs_info);
 
 	iput(fs_info->btree_inode);
-	kfree(fs_info->delayed_root);
 
 	btrfs_stop_workers(&fs_info->generic_worker);
 	btrfs_stop_workers(&fs_info->fixup_workers);
@@ -2617,6 +3047,7 @@
 	btrfs_stop_workers(&fs_info->submit_workers);
 	btrfs_stop_workers(&fs_info->delayed_workers);
 	btrfs_stop_workers(&fs_info->caching_workers);
+	btrfs_stop_workers(&fs_info->readahead_workers);
 
 	btrfs_close_devices(fs_info->fs_devices);
 	btrfs_mapping_tree_free(&fs_info->mapping_tree);
@@ -2624,12 +3055,7 @@
 	bdi_destroy(&fs_info->bdi);
 	cleanup_srcu_struct(&fs_info->subvol_srcu);
 
-	kfree(fs_info->extent_root);
-	kfree(fs_info->tree_root);
-	kfree(fs_info->chunk_root);
-	kfree(fs_info->dev_root);
-	kfree(fs_info->csum_root);
-	kfree(fs_info);
+	free_fs_info(fs_info);
 
 	return 0;
 }
@@ -2735,7 +3161,8 @@
 	return ret;
 }
 
-int btree_lock_page_hook(struct page *page)
+static int btree_lock_page_hook(struct page *page, void *data,
+				void (*flush_fn)(void *))
 {
 	struct inode *inode = page->mapping->host;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -2752,7 +3179,10 @@
 	if (!eb)
 		goto out;
 
-	btrfs_tree_lock(eb);
+	if (!btrfs_try_tree_write_lock(eb)) {
+		flush_fn(data);
+		btrfs_tree_lock(eb);
+	}
 	btrfs_set_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN);
 
 	if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
@@ -2767,7 +3197,10 @@
 	btrfs_tree_unlock(eb);
 	free_extent_buffer(eb);
 out:
-	lock_page(page);
+	if (!trylock_page(page)) {
+		flush_fn(data);
+		lock_page(page);
+	}
 	return 0;
 }
 
@@ -3123,6 +3556,7 @@
 static struct extent_io_ops btree_extent_io_ops = {
 	.write_cache_pages_lock_hook = btree_lock_page_hook,
 	.readpage_end_io_hook = btree_readpage_end_io_hook,
+	.readpage_io_failed_hook = btree_io_failed_hook,
 	.submit_bio_hook = btree_submit_bio_hook,
 	/* note we're sharing with inode.c for the merge bio hook */
 	.merge_bio_hook = btrfs_merge_bio_hook,
diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h
index bec3ea4..c99d0a8f 100644
--- a/fs/btrfs/disk-io.h
+++ b/fs/btrfs/disk-io.h
@@ -40,6 +40,8 @@
 				      u32 blocksize, u64 parent_transid);
 int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,
 			 u64 parent_transid);
+int reada_tree_block_flagged(struct btrfs_root *root, u64 bytenr, u32 blocksize,
+			 int mirror_num, struct extent_buffer **eb);
 struct extent_buffer *btrfs_find_create_tree_block(struct btrfs_root *root,
 						   u64 bytenr, u32 blocksize);
 int clean_tree_block(struct btrfs_trans_handle *trans,
@@ -83,8 +85,6 @@
 			     struct btrfs_fs_info *fs_info);
 int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root);
-int btree_lock_page_hook(struct page *page);
-
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 void btrfs_init_lockdep(void);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index f5be06a..f0d5718 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -23,6 +23,7 @@
 #include <linux/rcupdate.h>
 #include <linux/kthread.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 #include "compat.h"
 #include "hash.h"
 #include "ctree.h"
@@ -52,6 +53,21 @@
 	CHUNK_ALLOC_LIMITED = 2,
 };
 
+/*
+ * Control how reservations are dealt with.
+ *
+ * RESERVE_FREE - freeing a reservation.
+ * RESERVE_ALLOC - allocating space and we need to update bytes_may_use for
+ *   ENOSPC accounting
+ * RESERVE_ALLOC_NO_ACCOUNT - allocating space and we should not update
+ *   bytes_may_use as the ENOSPC accounting is done elsewhere
+ */
+enum {
+	RESERVE_FREE = 0,
+	RESERVE_ALLOC = 1,
+	RESERVE_ALLOC_NO_ACCOUNT = 2,
+};
+
 static int update_block_group(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root,
 			      u64 bytenr, u64 num_bytes, int alloc);
@@ -81,6 +97,8 @@
 			 struct btrfs_key *key);
 static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
 			    int dump_block_groups);
+static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
+				       u64 num_bytes, int reserve);
 
 static noinline int
 block_group_cache_done(struct btrfs_block_group_cache *cache)
@@ -104,7 +122,6 @@
 	if (atomic_dec_and_test(&cache->count)) {
 		WARN_ON(cache->pinned > 0);
 		WARN_ON(cache->reserved > 0);
-		WARN_ON(cache->reserved_pinned > 0);
 		kfree(cache->free_space_ctl);
 		kfree(cache);
 	}
@@ -450,49 +467,11 @@
 			     struct btrfs_root *root,
 			     int load_cache_only)
 {
+	DEFINE_WAIT(wait);
 	struct btrfs_fs_info *fs_info = cache->fs_info;
 	struct btrfs_caching_control *caching_ctl;
 	int ret = 0;
 
-	smp_mb();
-	if (cache->cached != BTRFS_CACHE_NO)
-		return 0;
-
-	/*
-	 * We can't do the read from on-disk cache during a commit since we need
-	 * to have the normal tree locking.  Also if we are currently trying to
-	 * allocate blocks for the tree root we can't do the fast caching since
-	 * we likely hold important locks.
-	 */
-	if (trans && (!trans->transaction->in_commit) &&
-	    (root && root != root->fs_info->tree_root)) {
-		spin_lock(&cache->lock);
-		if (cache->cached != BTRFS_CACHE_NO) {
-			spin_unlock(&cache->lock);
-			return 0;
-		}
-		cache->cached = BTRFS_CACHE_STARTED;
-		spin_unlock(&cache->lock);
-
-		ret = load_free_space_cache(fs_info, cache);
-
-		spin_lock(&cache->lock);
-		if (ret == 1) {
-			cache->cached = BTRFS_CACHE_FINISHED;
-			cache->last_byte_to_unpin = (u64)-1;
-		} else {
-			cache->cached = BTRFS_CACHE_NO;
-		}
-		spin_unlock(&cache->lock);
-		if (ret == 1) {
-			free_excluded_extents(fs_info->extent_root, cache);
-			return 0;
-		}
-	}
-
-	if (load_cache_only)
-		return 0;
-
 	caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS);
 	BUG_ON(!caching_ctl);
 
@@ -501,21 +480,101 @@
 	init_waitqueue_head(&caching_ctl->wait);
 	caching_ctl->block_group = cache;
 	caching_ctl->progress = cache->key.objectid;
-	/* one for caching kthread, one for caching block group list */
-	atomic_set(&caching_ctl->count, 2);
+	atomic_set(&caching_ctl->count, 1);
 	caching_ctl->work.func = caching_thread;
 
 	spin_lock(&cache->lock);
+	/*
+	 * This should be a rare occasion, but this could happen I think in the
+	 * case where one thread starts to load the space cache info, and then
+	 * some other thread starts a transaction commit which tries to do an
+	 * allocation while the other thread is still loading the space cache
+	 * info.  The previous loop should have kept us from choosing this block
+	 * group, but if we've moved to the state where we will wait on caching
+	 * block groups we need to first check if we're doing a fast load here,
+	 * so we can wait for it to finish, otherwise we could end up allocating
+	 * from a block group who's cache gets evicted for one reason or
+	 * another.
+	 */
+	while (cache->cached == BTRFS_CACHE_FAST) {
+		struct btrfs_caching_control *ctl;
+
+		ctl = cache->caching_ctl;
+		atomic_inc(&ctl->count);
+		prepare_to_wait(&ctl->wait, &wait, TASK_UNINTERRUPTIBLE);
+		spin_unlock(&cache->lock);
+
+		schedule();
+
+		finish_wait(&ctl->wait, &wait);
+		put_caching_control(ctl);
+		spin_lock(&cache->lock);
+	}
+
 	if (cache->cached != BTRFS_CACHE_NO) {
 		spin_unlock(&cache->lock);
 		kfree(caching_ctl);
 		return 0;
 	}
+	WARN_ON(cache->caching_ctl);
 	cache->caching_ctl = caching_ctl;
-	cache->cached = BTRFS_CACHE_STARTED;
+	cache->cached = BTRFS_CACHE_FAST;
 	spin_unlock(&cache->lock);
 
+	/*
+	 * We can't do the read from on-disk cache during a commit since we need
+	 * to have the normal tree locking.  Also if we are currently trying to
+	 * allocate blocks for the tree root we can't do the fast caching since
+	 * we likely hold important locks.
+	 */
+	if (trans && (!trans->transaction->in_commit) &&
+	    (root && root != root->fs_info->tree_root) &&
+	    btrfs_test_opt(root, SPACE_CACHE)) {
+		ret = load_free_space_cache(fs_info, cache);
+
+		spin_lock(&cache->lock);
+		if (ret == 1) {
+			cache->caching_ctl = NULL;
+			cache->cached = BTRFS_CACHE_FINISHED;
+			cache->last_byte_to_unpin = (u64)-1;
+		} else {
+			if (load_cache_only) {
+				cache->caching_ctl = NULL;
+				cache->cached = BTRFS_CACHE_NO;
+			} else {
+				cache->cached = BTRFS_CACHE_STARTED;
+			}
+		}
+		spin_unlock(&cache->lock);
+		wake_up(&caching_ctl->wait);
+		if (ret == 1) {
+			put_caching_control(caching_ctl);
+			free_excluded_extents(fs_info->extent_root, cache);
+			return 0;
+		}
+	} else {
+		/*
+		 * We are not going to do the fast caching, set cached to the
+		 * appropriate value and wakeup any waiters.
+		 */
+		spin_lock(&cache->lock);
+		if (load_cache_only) {
+			cache->caching_ctl = NULL;
+			cache->cached = BTRFS_CACHE_NO;
+		} else {
+			cache->cached = BTRFS_CACHE_STARTED;
+		}
+		spin_unlock(&cache->lock);
+		wake_up(&caching_ctl->wait);
+	}
+
+	if (load_cache_only) {
+		put_caching_control(caching_ctl);
+		return 0;
+	}
+
 	down_write(&fs_info->extent_commit_sem);
+	atomic_inc(&caching_ctl->count);
 	list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups);
 	up_write(&fs_info->extent_commit_sem);
 
@@ -1770,18 +1829,18 @@
 {
 	int ret;
 	u64 discarded_bytes = 0;
-	struct btrfs_multi_bio *multi = NULL;
+	struct btrfs_bio *bbio = NULL;
 
 
 	/* Tell the block device(s) that the sectors can be discarded */
 	ret = btrfs_map_block(&root->fs_info->mapping_tree, REQ_DISCARD,
-			      bytenr, &num_bytes, &multi, 0);
+			      bytenr, &num_bytes, &bbio, 0);
 	if (!ret) {
-		struct btrfs_bio_stripe *stripe = multi->stripes;
+		struct btrfs_bio_stripe *stripe = bbio->stripes;
 		int i;
 
 
-		for (i = 0; i < multi->num_stripes; i++, stripe++) {
+		for (i = 0; i < bbio->num_stripes; i++, stripe++) {
 			if (!stripe->dev->can_discard)
 				continue;
 
@@ -1800,7 +1859,7 @@
 			 */
 			ret = 0;
 		}
-		kfree(multi);
+		kfree(bbio);
 	}
 
 	if (actual_bytes)
@@ -2700,6 +2759,13 @@
 		goto again;
 	}
 
+	/* We've already setup this transaction, go ahead and exit */
+	if (block_group->cache_generation == trans->transid &&
+	    i_size_read(inode)) {
+		dcs = BTRFS_DC_SETUP;
+		goto out_put;
+	}
+
 	/*
 	 * We want to set the generation to 0, that way if anything goes wrong
 	 * from here on out we know not to trust this cache when we load up next
@@ -2749,12 +2815,15 @@
 	if (!ret)
 		dcs = BTRFS_DC_SETUP;
 	btrfs_free_reserved_data_space(inode, num_pages);
+
 out_put:
 	iput(inode);
 out_free:
 	btrfs_release_path(path);
 out:
 	spin_lock(&block_group->lock);
+	if (!ret)
+		block_group->cache_generation = trans->transid;
 	block_group->disk_cache_state = dcs;
 	spin_unlock(&block_group->lock);
 
@@ -3122,16 +3191,13 @@
 		return -ENOSPC;
 	}
 	data_sinfo->bytes_may_use += bytes;
-	BTRFS_I(inode)->reserved_bytes += bytes;
 	spin_unlock(&data_sinfo->lock);
 
 	return 0;
 }
 
 /*
- * called when we are clearing an delalloc extent from the
- * inode's io_tree or there was an error for whatever reason
- * after calling btrfs_check_data_free_space
+ * Called if we need to clear a data reservation for this inode.
  */
 void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes)
 {
@@ -3144,7 +3210,6 @@
 	data_sinfo = BTRFS_I(inode)->space_info;
 	spin_lock(&data_sinfo->lock);
 	data_sinfo->bytes_may_use -= bytes;
-	BTRFS_I(inode)->reserved_bytes -= bytes;
 	spin_unlock(&data_sinfo->lock);
 }
 
@@ -3165,6 +3230,7 @@
 			      struct btrfs_space_info *sinfo, u64 alloc_bytes,
 			      int force)
 {
+	struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv;
 	u64 num_bytes = sinfo->total_bytes - sinfo->bytes_readonly;
 	u64 num_allocated = sinfo->bytes_used + sinfo->bytes_reserved;
 	u64 thresh;
@@ -3173,11 +3239,18 @@
 		return 1;
 
 	/*
+	 * We need to take into account the global rsv because for all intents
+	 * and purposes it's used space.  Don't worry about locking the
+	 * global_rsv, it doesn't change except when the transaction commits.
+	 */
+	num_allocated += global_rsv->size;
+
+	/*
 	 * in limited mode, we want to have some free space up to
 	 * about 1% of the FS size.
 	 */
 	if (force == CHUNK_ALLOC_LIMITED) {
-		thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+		thresh = btrfs_super_total_bytes(root->fs_info->super_copy);
 		thresh = max_t(u64, 64 * 1024 * 1024,
 			       div_factor_fine(thresh, 1));
 
@@ -3199,7 +3272,7 @@
 	if (num_allocated + alloc_bytes < div_factor(num_bytes, 8))
 		return 0;
 
-	thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+	thresh = btrfs_super_total_bytes(root->fs_info->super_copy);
 
 	/* 256MB or 5% of the FS */
 	thresh = max_t(u64, 256 * 1024 * 1024, div_factor_fine(thresh, 5));
@@ -3302,24 +3375,26 @@
 /*
  * shrink metadata reservation for delalloc
  */
-static int shrink_delalloc(struct btrfs_trans_handle *trans,
-			   struct btrfs_root *root, u64 to_reclaim, int sync)
+static int shrink_delalloc(struct btrfs_root *root, u64 to_reclaim,
+			   bool wait_ordered)
 {
 	struct btrfs_block_rsv *block_rsv;
 	struct btrfs_space_info *space_info;
+	struct btrfs_trans_handle *trans;
 	u64 reserved;
 	u64 max_reclaim;
 	u64 reclaimed = 0;
 	long time_left;
-	int nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT;
+	unsigned long nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT;
 	int loops = 0;
 	unsigned long progress;
 
+	trans = (struct btrfs_trans_handle *)current->journal_info;
 	block_rsv = &root->fs_info->delalloc_block_rsv;
 	space_info = block_rsv->space_info;
 
 	smp_mb();
-	reserved = space_info->bytes_reserved;
+	reserved = space_info->bytes_may_use;
 	progress = space_info->reservation_progress;
 
 	if (reserved == 0)
@@ -3334,18 +3409,20 @@
 	}
 
 	max_reclaim = min(reserved, to_reclaim);
-
+	nr_pages = max_t(unsigned long, nr_pages,
+			 max_reclaim >> PAGE_CACHE_SHIFT);
 	while (loops < 1024) {
 		/* have the flusher threads jump in and do some IO */
 		smp_mb();
 		nr_pages = min_t(unsigned long, nr_pages,
 		       root->fs_info->delalloc_bytes >> PAGE_CACHE_SHIFT);
-		writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages);
+		writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages,
+						WB_REASON_FS_FREE_SPACE);
 
 		spin_lock(&space_info->lock);
-		if (reserved > space_info->bytes_reserved)
-			reclaimed += reserved - space_info->bytes_reserved;
-		reserved = space_info->bytes_reserved;
+		if (reserved > space_info->bytes_may_use)
+			reclaimed += reserved - space_info->bytes_may_use;
+		reserved = space_info->bytes_may_use;
 		spin_unlock(&space_info->lock);
 
 		loops++;
@@ -3356,11 +3433,15 @@
 		if (trans && trans->transaction->blocked)
 			return -EAGAIN;
 
-		time_left = schedule_timeout_interruptible(1);
+		if (wait_ordered && !trans) {
+			btrfs_wait_ordered_extents(root, 0, 0);
+		} else {
+			time_left = schedule_timeout_interruptible(1);
 
-		/* We were interrupted, exit */
-		if (time_left)
-			break;
+			/* We were interrupted, exit */
+			if (time_left)
+				break;
+		}
 
 		/* we've kicked the IO a few times, if anything has been freed,
 		 * exit.  There is no sense in looping here for a long time
@@ -3375,34 +3456,90 @@
 		}
 
 	}
-	if (reclaimed >= to_reclaim && !trans)
-		btrfs_wait_ordered_extents(root, 0, 0);
+
 	return reclaimed >= to_reclaim;
 }
 
-/*
- * Retries tells us how many times we've called reserve_metadata_bytes.  The
- * idea is if this is the first call (retries == 0) then we will add to our
- * reserved count if we can't make the allocation in order to hold our place
- * while we go and try and free up space.  That way for retries > 1 we don't try
- * and add space, we just check to see if the amount of unused space is >= the
- * total space, meaning that our reservation is valid.
+/**
+ * maybe_commit_transaction - possibly commit the transaction if its ok to
+ * @root - the root we're allocating for
+ * @bytes - the number of bytes we want to reserve
+ * @force - force the commit
  *
- * However if we don't intend to retry this reservation, pass -1 as retries so
- * that it short circuits this logic.
+ * This will check to make sure that committing the transaction will actually
+ * get us somewhere and then commit the transaction if it does.  Otherwise it
+ * will return -ENOSPC.
  */
-static int reserve_metadata_bytes(struct btrfs_trans_handle *trans,
-				  struct btrfs_root *root,
+static int may_commit_transaction(struct btrfs_root *root,
+				  struct btrfs_space_info *space_info,
+				  u64 bytes, int force)
+{
+	struct btrfs_block_rsv *delayed_rsv = &root->fs_info->delayed_block_rsv;
+	struct btrfs_trans_handle *trans;
+
+	trans = (struct btrfs_trans_handle *)current->journal_info;
+	if (trans)
+		return -EAGAIN;
+
+	if (force)
+		goto commit;
+
+	/* See if there is enough pinned space to make this reservation */
+	spin_lock(&space_info->lock);
+	if (space_info->bytes_pinned >= bytes) {
+		spin_unlock(&space_info->lock);
+		goto commit;
+	}
+	spin_unlock(&space_info->lock);
+
+	/*
+	 * See if there is some space in the delayed insertion reservation for
+	 * this reservation.
+	 */
+	if (space_info != delayed_rsv->space_info)
+		return -ENOSPC;
+
+	spin_lock(&delayed_rsv->lock);
+	if (delayed_rsv->size < bytes) {
+		spin_unlock(&delayed_rsv->lock);
+		return -ENOSPC;
+	}
+	spin_unlock(&delayed_rsv->lock);
+
+commit:
+	trans = btrfs_join_transaction(root);
+	if (IS_ERR(trans))
+		return -ENOSPC;
+
+	return btrfs_commit_transaction(trans, root);
+}
+
+/**
+ * reserve_metadata_bytes - try to reserve bytes from the block_rsv's space
+ * @root - the root we're allocating for
+ * @block_rsv - the block_rsv we're allocating for
+ * @orig_bytes - the number of bytes we want
+ * @flush - wether or not we can flush to make our reservation
+ *
+ * This will reserve orgi_bytes number of bytes from the space info associated
+ * with the block_rsv.  If there is not enough space it will make an attempt to
+ * flush out space to make room.  It will do this by flushing delalloc if
+ * possible or committing the transaction.  If flush is 0 then no attempts to
+ * regain reservations will be made and this will fail if there is not enough
+ * space already.
+ */
+static int reserve_metadata_bytes(struct btrfs_root *root,
 				  struct btrfs_block_rsv *block_rsv,
 				  u64 orig_bytes, int flush)
 {
 	struct btrfs_space_info *space_info = block_rsv->space_info;
-	u64 unused;
+	u64 used;
 	u64 num_bytes = orig_bytes;
 	int retries = 0;
 	int ret = 0;
 	bool committed = false;
 	bool flushing = false;
+	bool wait_ordered = false;
 
 again:
 	ret = 0;
@@ -3419,7 +3556,7 @@
 		 * deadlock since we are waiting for the flusher to finish, but
 		 * hold the current transaction open.
 		 */
-		if (trans)
+		if (current->journal_info)
 			return -EAGAIN;
 		ret = wait_event_interruptible(space_info->wait,
 					       !space_info->flush);
@@ -3431,9 +3568,9 @@
 	}
 
 	ret = -ENOSPC;
-	unused = space_info->bytes_used + space_info->bytes_reserved +
-		 space_info->bytes_pinned + space_info->bytes_readonly +
-		 space_info->bytes_may_use;
+	used = space_info->bytes_used + space_info->bytes_reserved +
+		space_info->bytes_pinned + space_info->bytes_readonly +
+		space_info->bytes_may_use;
 
 	/*
 	 * The idea here is that we've not already over-reserved the block group
@@ -3442,10 +3579,9 @@
 	 * lets start flushing stuff first and then come back and try to make
 	 * our reservation.
 	 */
-	if (unused <= space_info->total_bytes) {
-		unused = space_info->total_bytes - unused;
-		if (unused >= num_bytes) {
-			space_info->bytes_reserved += orig_bytes;
+	if (used <= space_info->total_bytes) {
+		if (used + orig_bytes <= space_info->total_bytes) {
+			space_info->bytes_may_use += orig_bytes;
 			ret = 0;
 		} else {
 			/*
@@ -3461,10 +3597,64 @@
 		 * amount plus the amount of bytes that we need for this
 		 * reservation.
 		 */
-		num_bytes = unused - space_info->total_bytes +
+		wait_ordered = true;
+		num_bytes = used - space_info->total_bytes +
 			(orig_bytes * (retries + 1));
 	}
 
+	if (ret) {
+		u64 profile = btrfs_get_alloc_profile(root, 0);
+		u64 avail;
+
+		/*
+		 * If we have a lot of space that's pinned, don't bother doing
+		 * the overcommit dance yet and just commit the transaction.
+		 */
+		avail = (space_info->total_bytes - space_info->bytes_used) * 8;
+		do_div(avail, 10);
+		if (space_info->bytes_pinned >= avail && flush && !committed) {
+			space_info->flush = 1;
+			flushing = true;
+			spin_unlock(&space_info->lock);
+			ret = may_commit_transaction(root, space_info,
+						     orig_bytes, 1);
+			if (ret)
+				goto out;
+			committed = true;
+			goto again;
+		}
+
+		spin_lock(&root->fs_info->free_chunk_lock);
+		avail = root->fs_info->free_chunk_space;
+
+		/*
+		 * If we have dup, raid1 or raid10 then only half of the free
+		 * space is actually useable.
+		 */
+		if (profile & (BTRFS_BLOCK_GROUP_DUP |
+			       BTRFS_BLOCK_GROUP_RAID1 |
+			       BTRFS_BLOCK_GROUP_RAID10))
+			avail >>= 1;
+
+		/*
+		 * If we aren't flushing don't let us overcommit too much, say
+		 * 1/8th of the space.  If we can flush, let it overcommit up to
+		 * 1/2 of the space.
+		 */
+		if (flush)
+			avail >>= 3;
+		else
+			avail >>= 1;
+		 spin_unlock(&root->fs_info->free_chunk_lock);
+
+		if (used + num_bytes < space_info->total_bytes + avail) {
+			space_info->bytes_may_use += orig_bytes;
+			ret = 0;
+		} else {
+			wait_ordered = true;
+		}
+	}
+
 	/*
 	 * Couldn't make our reservation, save our place so while we're trying
 	 * to reclaim space we can actually use it instead of somebody else
@@ -3484,7 +3674,7 @@
 	 * We do synchronous shrinking since we don't actually unreserve
 	 * metadata until after the IO is completed.
 	 */
-	ret = shrink_delalloc(trans, root, num_bytes, 1);
+	ret = shrink_delalloc(root, num_bytes, wait_ordered);
 	if (ret < 0)
 		goto out;
 
@@ -3496,35 +3686,17 @@
 	 * so go back around and try again.
 	 */
 	if (retries < 2) {
+		wait_ordered = true;
 		retries++;
 		goto again;
 	}
 
-	/*
-	 * Not enough space to be reclaimed, don't bother committing the
-	 * transaction.
-	 */
-	spin_lock(&space_info->lock);
-	if (space_info->bytes_pinned < orig_bytes)
-		ret = -ENOSPC;
-	spin_unlock(&space_info->lock);
-	if (ret)
-		goto out;
-
-	ret = -EAGAIN;
-	if (trans)
-		goto out;
-
 	ret = -ENOSPC;
 	if (committed)
 		goto out;
 
-	trans = btrfs_join_transaction(root);
-	if (IS_ERR(trans))
-		goto out;
-	ret = btrfs_commit_transaction(trans, root);
+	ret = may_commit_transaction(root, space_info, orig_bytes, 0);
 	if (!ret) {
-		trans = NULL;
 		committed = true;
 		goto again;
 	}
@@ -3542,10 +3714,12 @@
 static struct btrfs_block_rsv *get_block_rsv(struct btrfs_trans_handle *trans,
 					     struct btrfs_root *root)
 {
-	struct btrfs_block_rsv *block_rsv;
-	if (root->ref_cows)
+	struct btrfs_block_rsv *block_rsv = NULL;
+
+	if (root->ref_cows || root == root->fs_info->csum_root)
 		block_rsv = trans->block_rsv;
-	else
+
+	if (!block_rsv)
 		block_rsv = root->block_rsv;
 
 	if (!block_rsv)
@@ -3616,7 +3790,7 @@
 		}
 		if (num_bytes) {
 			spin_lock(&space_info->lock);
-			space_info->bytes_reserved -= num_bytes;
+			space_info->bytes_may_use -= num_bytes;
 			space_info->reservation_progress++;
 			spin_unlock(&space_info->lock);
 		}
@@ -3640,9 +3814,6 @@
 {
 	memset(rsv, 0, sizeof(*rsv));
 	spin_lock_init(&rsv->lock);
-	atomic_set(&rsv->usage, 1);
-	rsv->priority = 6;
-	INIT_LIST_HEAD(&rsv->list);
 }
 
 struct btrfs_block_rsv *btrfs_alloc_block_rsv(struct btrfs_root *root)
@@ -3663,38 +3834,20 @@
 void btrfs_free_block_rsv(struct btrfs_root *root,
 			  struct btrfs_block_rsv *rsv)
 {
-	if (rsv && atomic_dec_and_test(&rsv->usage)) {
-		btrfs_block_rsv_release(root, rsv, (u64)-1);
-		if (!rsv->durable)
-			kfree(rsv);
-	}
+	btrfs_block_rsv_release(root, rsv, (u64)-1);
+	kfree(rsv);
 }
 
-/*
- * make the block_rsv struct be able to capture freed space.
- * the captured space will re-add to the the block_rsv struct
- * after transaction commit
- */
-void btrfs_add_durable_block_rsv(struct btrfs_fs_info *fs_info,
-				 struct btrfs_block_rsv *block_rsv)
-{
-	block_rsv->durable = 1;
-	mutex_lock(&fs_info->durable_block_rsv_mutex);
-	list_add_tail(&block_rsv->list, &fs_info->durable_block_rsv_list);
-	mutex_unlock(&fs_info->durable_block_rsv_mutex);
-}
-
-int btrfs_block_rsv_add(struct btrfs_trans_handle *trans,
-			struct btrfs_root *root,
-			struct btrfs_block_rsv *block_rsv,
-			u64 num_bytes)
+static inline int __block_rsv_add(struct btrfs_root *root,
+				  struct btrfs_block_rsv *block_rsv,
+				  u64 num_bytes, int flush)
 {
 	int ret;
 
 	if (num_bytes == 0)
 		return 0;
 
-	ret = reserve_metadata_bytes(trans, root, block_rsv, num_bytes, 1);
+	ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
 	if (!ret) {
 		block_rsv_add_bytes(block_rsv, num_bytes, 1);
 		return 0;
@@ -3703,55 +3856,80 @@
 	return ret;
 }
 
-int btrfs_block_rsv_check(struct btrfs_trans_handle *trans,
-			  struct btrfs_root *root,
-			  struct btrfs_block_rsv *block_rsv,
-			  u64 min_reserved, int min_factor)
+int btrfs_block_rsv_add(struct btrfs_root *root,
+			struct btrfs_block_rsv *block_rsv,
+			u64 num_bytes)
+{
+	return __block_rsv_add(root, block_rsv, num_bytes, 1);
+}
+
+int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
+				struct btrfs_block_rsv *block_rsv,
+				u64 num_bytes)
+{
+	return __block_rsv_add(root, block_rsv, num_bytes, 0);
+}
+
+int btrfs_block_rsv_check(struct btrfs_root *root,
+			  struct btrfs_block_rsv *block_rsv, int min_factor)
 {
 	u64 num_bytes = 0;
-	int commit_trans = 0;
 	int ret = -ENOSPC;
 
 	if (!block_rsv)
 		return 0;
 
 	spin_lock(&block_rsv->lock);
-	if (min_factor > 0)
-		num_bytes = div_factor(block_rsv->size, min_factor);
-	if (min_reserved > num_bytes)
-		num_bytes = min_reserved;
-
-	if (block_rsv->reserved >= num_bytes) {
+	num_bytes = div_factor(block_rsv->size, min_factor);
+	if (block_rsv->reserved >= num_bytes)
 		ret = 0;
-	} else {
-		num_bytes -= block_rsv->reserved;
-		if (block_rsv->durable &&
-		    block_rsv->freed[0] + block_rsv->freed[1] >= num_bytes)
-			commit_trans = 1;
-	}
 	spin_unlock(&block_rsv->lock);
+
+	return ret;
+}
+
+static inline int __btrfs_block_rsv_refill(struct btrfs_root *root,
+					   struct btrfs_block_rsv *block_rsv,
+					   u64 min_reserved, int flush)
+{
+	u64 num_bytes = 0;
+	int ret = -ENOSPC;
+
+	if (!block_rsv)
+		return 0;
+
+	spin_lock(&block_rsv->lock);
+	num_bytes = min_reserved;
+	if (block_rsv->reserved >= num_bytes)
+		ret = 0;
+	else
+		num_bytes -= block_rsv->reserved;
+	spin_unlock(&block_rsv->lock);
+
 	if (!ret)
 		return 0;
 
-	if (block_rsv->refill_used) {
-		ret = reserve_metadata_bytes(trans, root, block_rsv,
-					     num_bytes, 0);
-		if (!ret) {
-			block_rsv_add_bytes(block_rsv, num_bytes, 0);
-			return 0;
-		}
-	}
-
-	if (commit_trans) {
-		if (trans)
-			return -EAGAIN;
-		trans = btrfs_join_transaction(root);
-		BUG_ON(IS_ERR(trans));
-		ret = btrfs_commit_transaction(trans, root);
+	ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
+	if (!ret) {
+		block_rsv_add_bytes(block_rsv, num_bytes, 0);
 		return 0;
 	}
 
-	return -ENOSPC;
+	return ret;
+}
+
+int btrfs_block_rsv_refill(struct btrfs_root *root,
+			   struct btrfs_block_rsv *block_rsv,
+			   u64 min_reserved)
+{
+	return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 1);
+}
+
+int btrfs_block_rsv_refill_noflush(struct btrfs_root *root,
+				   struct btrfs_block_rsv *block_rsv,
+				   u64 min_reserved)
+{
+	return __btrfs_block_rsv_refill(root, block_rsv, min_reserved, 0);
 }
 
 int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv,
@@ -3783,7 +3961,7 @@
 	u64 num_bytes;
 	u64 meta_used;
 	u64 data_used;
-	int csum_size = btrfs_super_csum_size(&fs_info->super_copy);
+	int csum_size = btrfs_super_csum_size(fs_info->super_copy);
 
 	sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA);
 	spin_lock(&sinfo->lock);
@@ -3827,12 +4005,12 @@
 	if (sinfo->total_bytes > num_bytes) {
 		num_bytes = sinfo->total_bytes - num_bytes;
 		block_rsv->reserved += num_bytes;
-		sinfo->bytes_reserved += num_bytes;
+		sinfo->bytes_may_use += num_bytes;
 	}
 
 	if (block_rsv->reserved >= block_rsv->size) {
 		num_bytes = block_rsv->reserved - block_rsv->size;
-		sinfo->bytes_reserved -= num_bytes;
+		sinfo->bytes_may_use -= num_bytes;
 		sinfo->reservation_progress++;
 		block_rsv->reserved = block_rsv->size;
 		block_rsv->full = 1;
@@ -3848,16 +4026,13 @@
 
 	space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_SYSTEM);
 	fs_info->chunk_block_rsv.space_info = space_info;
-	fs_info->chunk_block_rsv.priority = 10;
 
 	space_info = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA);
 	fs_info->global_block_rsv.space_info = space_info;
-	fs_info->global_block_rsv.priority = 10;
-	fs_info->global_block_rsv.refill_used = 1;
 	fs_info->delalloc_block_rsv.space_info = space_info;
 	fs_info->trans_block_rsv.space_info = space_info;
 	fs_info->empty_block_rsv.space_info = space_info;
-	fs_info->empty_block_rsv.priority = 10;
+	fs_info->delayed_block_rsv.space_info = space_info;
 
 	fs_info->extent_root->block_rsv = &fs_info->global_block_rsv;
 	fs_info->csum_root->block_rsv = &fs_info->global_block_rsv;
@@ -3865,10 +4040,6 @@
 	fs_info->tree_root->block_rsv = &fs_info->global_block_rsv;
 	fs_info->chunk_root->block_rsv = &fs_info->chunk_block_rsv;
 
-	btrfs_add_durable_block_rsv(fs_info, &fs_info->global_block_rsv);
-
-	btrfs_add_durable_block_rsv(fs_info, &fs_info->delalloc_block_rsv);
-
 	update_global_block_rsv(fs_info);
 }
 
@@ -3881,37 +4052,8 @@
 	WARN_ON(fs_info->trans_block_rsv.reserved > 0);
 	WARN_ON(fs_info->chunk_block_rsv.size > 0);
 	WARN_ON(fs_info->chunk_block_rsv.reserved > 0);
-}
-
-int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans,
-				    struct btrfs_root *root,
-				    struct btrfs_block_rsv *rsv)
-{
-	struct btrfs_block_rsv *trans_rsv = &root->fs_info->trans_block_rsv;
-	u64 num_bytes;
-	int ret;
-
-	/*
-	 * Truncate should be freeing data, but give us 2 items just in case it
-	 * needs to use some space.  We may want to be smarter about this in the
-	 * future.
-	 */
-	num_bytes = btrfs_calc_trans_metadata_size(root, 2);
-
-	/* We already have enough bytes, just return */
-	if (rsv->reserved >= num_bytes)
-		return 0;
-
-	num_bytes -= rsv->reserved;
-
-	/*
-	 * You should have reserved enough space before hand to do this, so this
-	 * should not fail.
-	 */
-	ret = block_rsv_migrate_bytes(trans_rsv, rsv, num_bytes);
-	BUG_ON(ret);
-
-	return 0;
+	WARN_ON(fs_info->delayed_block_rsv.size > 0);
+	WARN_ON(fs_info->delayed_block_rsv.reserved > 0);
 }
 
 void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans,
@@ -3920,9 +4062,7 @@
 	if (!trans->bytes_reserved)
 		return;
 
-	BUG_ON(trans->block_rsv != &root->fs_info->trans_block_rsv);
-	btrfs_block_rsv_release(root, trans->block_rsv,
-				trans->bytes_reserved);
+	btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
 	trans->bytes_reserved = 0;
 }
 
@@ -3964,33 +4104,99 @@
 	return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes);
 }
 
+/**
+ * drop_outstanding_extent - drop an outstanding extent
+ * @inode: the inode we're dropping the extent for
+ *
+ * This is called when we are freeing up an outstanding extent, either called
+ * after an error or after an extent is written.  This will return the number of
+ * reserved extents that need to be freed.  This must be called with
+ * BTRFS_I(inode)->lock held.
+ */
 static unsigned drop_outstanding_extent(struct inode *inode)
 {
+	unsigned drop_inode_space = 0;
 	unsigned dropped_extents = 0;
 
-	spin_lock(&BTRFS_I(inode)->lock);
 	BUG_ON(!BTRFS_I(inode)->outstanding_extents);
 	BTRFS_I(inode)->outstanding_extents--;
 
+	if (BTRFS_I(inode)->outstanding_extents == 0 &&
+	    BTRFS_I(inode)->delalloc_meta_reserved) {
+		drop_inode_space = 1;
+		BTRFS_I(inode)->delalloc_meta_reserved = 0;
+	}
+
 	/*
 	 * If we have more or the same amount of outsanding extents than we have
 	 * reserved then we need to leave the reserved extents count alone.
 	 */
 	if (BTRFS_I(inode)->outstanding_extents >=
 	    BTRFS_I(inode)->reserved_extents)
-		goto out;
+		return drop_inode_space;
 
 	dropped_extents = BTRFS_I(inode)->reserved_extents -
 		BTRFS_I(inode)->outstanding_extents;
 	BTRFS_I(inode)->reserved_extents -= dropped_extents;
-out:
-	spin_unlock(&BTRFS_I(inode)->lock);
-	return dropped_extents;
+	return dropped_extents + drop_inode_space;
 }
 
-static u64 calc_csum_metadata_size(struct inode *inode, u64 num_bytes)
+/**
+ * calc_csum_metadata_size - return the amount of metada space that must be
+ *	reserved/free'd for the given bytes.
+ * @inode: the inode we're manipulating
+ * @num_bytes: the number of bytes in question
+ * @reserve: 1 if we are reserving space, 0 if we are freeing space
+ *
+ * This adjusts the number of csum_bytes in the inode and then returns the
+ * correct amount of metadata that must either be reserved or freed.  We
+ * calculate how many checksums we can fit into one leaf and then divide the
+ * number of bytes that will need to be checksumed by this value to figure out
+ * how many checksums will be required.  If we are adding bytes then the number
+ * may go up and we will return the number of additional bytes that must be
+ * reserved.  If it is going down we will return the number of bytes that must
+ * be freed.
+ *
+ * This must be called with BTRFS_I(inode)->lock held.
+ */
+static u64 calc_csum_metadata_size(struct inode *inode, u64 num_bytes,
+				   int reserve)
 {
-	return num_bytes >>= 3;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	u64 csum_size;
+	int num_csums_per_leaf;
+	int num_csums;
+	int old_csums;
+
+	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM &&
+	    BTRFS_I(inode)->csum_bytes == 0)
+		return 0;
+
+	old_csums = (int)div64_u64(BTRFS_I(inode)->csum_bytes, root->sectorsize);
+	if (reserve)
+		BTRFS_I(inode)->csum_bytes += num_bytes;
+	else
+		BTRFS_I(inode)->csum_bytes -= num_bytes;
+	csum_size = BTRFS_LEAF_DATA_SIZE(root) - sizeof(struct btrfs_item);
+	num_csums_per_leaf = (int)div64_u64(csum_size,
+					    sizeof(struct btrfs_csum_item) +
+					    sizeof(struct btrfs_disk_key));
+	num_csums = (int)div64_u64(BTRFS_I(inode)->csum_bytes, root->sectorsize);
+	num_csums = num_csums + num_csums_per_leaf - 1;
+	num_csums = num_csums / num_csums_per_leaf;
+
+	old_csums = old_csums + num_csums_per_leaf - 1;
+	old_csums = old_csums / num_csums_per_leaf;
+
+	/* No change, no need to reserve more */
+	if (old_csums == num_csums)
+		return 0;
+
+	if (reserve)
+		return btrfs_calc_trans_metadata_size(root,
+						      num_csums - old_csums);
+
+	return btrfs_calc_trans_metadata_size(root, old_csums - num_csums);
 }
 
 int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes)
@@ -3999,9 +4205,13 @@
 	struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv;
 	u64 to_reserve = 0;
 	unsigned nr_extents = 0;
+	int flush = 1;
 	int ret;
 
-	if (btrfs_transaction_in_commit(root->fs_info))
+	if (btrfs_is_free_space_inode(root, inode))
+		flush = 0;
+
+	if (flush && btrfs_transaction_in_commit(root->fs_info))
 		schedule_timeout(1);
 
 	num_bytes = ALIGN(num_bytes, root->sectorsize);
@@ -4014,21 +4224,41 @@
 		nr_extents = BTRFS_I(inode)->outstanding_extents -
 			BTRFS_I(inode)->reserved_extents;
 		BTRFS_I(inode)->reserved_extents += nr_extents;
-
-		to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
 	}
+
+	/*
+	 * Add an item to reserve for updating the inode when we complete the
+	 * delalloc io.
+	 */
+	if (!BTRFS_I(inode)->delalloc_meta_reserved) {
+		nr_extents++;
+		BTRFS_I(inode)->delalloc_meta_reserved = 1;
+	}
+
+	to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
+	to_reserve += calc_csum_metadata_size(inode, num_bytes, 1);
 	spin_unlock(&BTRFS_I(inode)->lock);
 
-	to_reserve += calc_csum_metadata_size(inode, num_bytes);
-	ret = reserve_metadata_bytes(NULL, root, block_rsv, to_reserve, 1);
+	ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush);
 	if (ret) {
+		u64 to_free = 0;
 		unsigned dropped;
-		/*
-		 * We don't need the return value since our reservation failed,
-		 * we just need to clean up our counter.
-		 */
+
+		spin_lock(&BTRFS_I(inode)->lock);
 		dropped = drop_outstanding_extent(inode);
-		WARN_ON(dropped > 1);
+		to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+		spin_unlock(&BTRFS_I(inode)->lock);
+		to_free += btrfs_calc_trans_metadata_size(root, dropped);
+
+		/*
+		 * Somebody could have come in and twiddled with the
+		 * reservation, so if we have to free more than we would have
+		 * reserved from this reservation go ahead and release those
+		 * bytes.
+		 */
+		to_free -= to_reserve;
+		if (to_free)
+			btrfs_block_rsv_release(root, block_rsv, to_free);
 		return ret;
 	}
 
@@ -4037,6 +4267,15 @@
 	return 0;
 }
 
+/**
+ * btrfs_delalloc_release_metadata - release a metadata reservation for an inode
+ * @inode: the inode to release the reservation for
+ * @num_bytes: the number of bytes we're releasing
+ *
+ * This will release the metadata reservation for an inode.  This can be called
+ * once we complete IO for a given set of bytes to release their metadata
+ * reservations.
+ */
 void btrfs_delalloc_release_metadata(struct inode *inode, u64 num_bytes)
 {
 	struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -4044,9 +4283,11 @@
 	unsigned dropped;
 
 	num_bytes = ALIGN(num_bytes, root->sectorsize);
+	spin_lock(&BTRFS_I(inode)->lock);
 	dropped = drop_outstanding_extent(inode);
 
-	to_free = calc_csum_metadata_size(inode, num_bytes);
+	to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+	spin_unlock(&BTRFS_I(inode)->lock);
 	if (dropped > 0)
 		to_free += btrfs_calc_trans_metadata_size(root, dropped);
 
@@ -4054,6 +4295,21 @@
 				to_free);
 }
 
+/**
+ * btrfs_delalloc_reserve_space - reserve data and metadata space for delalloc
+ * @inode: inode we're writing to
+ * @num_bytes: the number of bytes we want to allocate
+ *
+ * This will do the following things
+ *
+ * o reserve space in the data space info for num_bytes
+ * o reserve space in the metadata space info based on number of outstanding
+ *   extents and how much csums will be needed
+ * o add to the inodes ->delalloc_bytes
+ * o add it to the fs_info's delalloc inodes list.
+ *
+ * This will return 0 for success and -ENOSPC if there is no space left.
+ */
 int btrfs_delalloc_reserve_space(struct inode *inode, u64 num_bytes)
 {
 	int ret;
@@ -4071,6 +4327,19 @@
 	return 0;
 }
 
+/**
+ * btrfs_delalloc_release_space - release data and metadata space for delalloc
+ * @inode: inode we're releasing space for
+ * @num_bytes: the number of bytes we want to free up
+ *
+ * This must be matched with a call to btrfs_delalloc_reserve_space.  This is
+ * called in the case that we don't need the metadata AND data reservations
+ * anymore.  So if there is an error or we insert an inline extent.
+ *
+ * This function will release the metadata space that was not used and will
+ * decrement ->delalloc_bytes and remove it from the fs_info delalloc_inodes
+ * list if there are no delalloc bytes left.
+ */
 void btrfs_delalloc_release_space(struct inode *inode, u64 num_bytes)
 {
 	btrfs_delalloc_release_metadata(inode, num_bytes);
@@ -4090,12 +4359,12 @@
 
 	/* block accounting for super block */
 	spin_lock(&info->delalloc_lock);
-	old_val = btrfs_super_bytes_used(&info->super_copy);
+	old_val = btrfs_super_bytes_used(info->super_copy);
 	if (alloc)
 		old_val += num_bytes;
 	else
 		old_val -= num_bytes;
-	btrfs_set_super_bytes_used(&info->super_copy, old_val);
+	btrfs_set_super_bytes_used(info->super_copy, old_val);
 	spin_unlock(&info->delalloc_lock);
 
 	while (total) {
@@ -4123,7 +4392,7 @@
 		spin_lock(&cache->space_info->lock);
 		spin_lock(&cache->lock);
 
-		if (btrfs_super_cache_generation(&info->super_copy) != 0 &&
+		if (btrfs_test_opt(root, SPACE_CACHE) &&
 		    cache->disk_cache_state < BTRFS_DC_CLEAR)
 			cache->disk_cache_state = BTRFS_DC_CLEAR;
 
@@ -4135,7 +4404,6 @@
 			btrfs_set_block_group_used(&cache->item, old_val);
 			cache->reserved -= num_bytes;
 			cache->space_info->bytes_reserved -= num_bytes;
-			cache->space_info->reservation_progress++;
 			cache->space_info->bytes_used += num_bytes;
 			cache->space_info->disk_used += num_bytes * factor;
 			spin_unlock(&cache->lock);
@@ -4187,7 +4455,6 @@
 	if (reserved) {
 		cache->reserved -= num_bytes;
 		cache->space_info->bytes_reserved -= num_bytes;
-		cache->space_info->reservation_progress++;
 	}
 	spin_unlock(&cache->lock);
 	spin_unlock(&cache->space_info->lock);
@@ -4215,45 +4482,82 @@
 }
 
 /*
- * update size of reserved extents. this function may return -EAGAIN
- * if 'reserve' is true or 'sinfo' is false.
+ * this function must be called within transaction
  */
-int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
-				u64 num_bytes, int reserve, int sinfo)
+int btrfs_pin_extent_for_log_replay(struct btrfs_trans_handle *trans,
+				    struct btrfs_root *root,
+				    u64 bytenr, u64 num_bytes)
 {
+	struct btrfs_block_group_cache *cache;
+
+	cache = btrfs_lookup_block_group(root->fs_info, bytenr);
+	BUG_ON(!cache);
+
+	/*
+	 * pull in the free space cache (if any) so that our pin
+	 * removes the free space from the cache.  We have load_only set
+	 * to one because the slow code to read in the free extents does check
+	 * the pinned extents.
+	 */
+	cache_block_group(cache, trans, root, 1);
+
+	pin_down_extent(root, cache, bytenr, num_bytes, 0);
+
+	/* remove us from the free space cache (if we're there at all) */
+	btrfs_remove_free_space(cache, bytenr, num_bytes);
+	btrfs_put_block_group(cache);
+	return 0;
+}
+
+/**
+ * btrfs_update_reserved_bytes - update the block_group and space info counters
+ * @cache:	The cache we are manipulating
+ * @num_bytes:	The number of bytes in question
+ * @reserve:	One of the reservation enums
+ *
+ * This is called by the allocator when it reserves space, or by somebody who is
+ * freeing space that was never actually used on disk.  For example if you
+ * reserve some space for a new leaf in transaction A and before transaction A
+ * commits you free that leaf, you call this with reserve set to 0 in order to
+ * clear the reservation.
+ *
+ * Metadata reservations should be called with RESERVE_ALLOC so we do the proper
+ * ENOSPC accounting.  For data we handle the reservation through clearing the
+ * delalloc bits in the io_tree.  We have to do this since we could end up
+ * allocating less disk space for the amount of data we have reserved in the
+ * case of compression.
+ *
+ * If this is a reservation and the block group has become read only we cannot
+ * make the reservation and return -EAGAIN, otherwise this function always
+ * succeeds.
+ */
+static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache,
+				       u64 num_bytes, int reserve)
+{
+	struct btrfs_space_info *space_info = cache->space_info;
 	int ret = 0;
-	if (sinfo) {
-		struct btrfs_space_info *space_info = cache->space_info;
-		spin_lock(&space_info->lock);
-		spin_lock(&cache->lock);
-		if (reserve) {
-			if (cache->ro) {
-				ret = -EAGAIN;
-			} else {
-				cache->reserved += num_bytes;
-				space_info->bytes_reserved += num_bytes;
-			}
-		} else {
-			if (cache->ro)
-				space_info->bytes_readonly += num_bytes;
-			cache->reserved -= num_bytes;
-			space_info->bytes_reserved -= num_bytes;
-			space_info->reservation_progress++;
-		}
-		spin_unlock(&cache->lock);
-		spin_unlock(&space_info->lock);
-	} else {
-		spin_lock(&cache->lock);
+	spin_lock(&space_info->lock);
+	spin_lock(&cache->lock);
+	if (reserve != RESERVE_FREE) {
 		if (cache->ro) {
 			ret = -EAGAIN;
 		} else {
-			if (reserve)
-				cache->reserved += num_bytes;
-			else
-				cache->reserved -= num_bytes;
+			cache->reserved += num_bytes;
+			space_info->bytes_reserved += num_bytes;
+			if (reserve == RESERVE_ALLOC) {
+				BUG_ON(space_info->bytes_may_use < num_bytes);
+				space_info->bytes_may_use -= num_bytes;
+			}
 		}
-		spin_unlock(&cache->lock);
+	} else {
+		if (cache->ro)
+			space_info->bytes_readonly += num_bytes;
+		cache->reserved -= num_bytes;
+		space_info->bytes_reserved -= num_bytes;
+		space_info->reservation_progress++;
 	}
+	spin_unlock(&cache->lock);
+	spin_unlock(&space_info->lock);
 	return ret;
 }
 
@@ -4319,13 +4623,8 @@
 		spin_lock(&cache->lock);
 		cache->pinned -= len;
 		cache->space_info->bytes_pinned -= len;
-		if (cache->ro) {
+		if (cache->ro)
 			cache->space_info->bytes_readonly += len;
-		} else if (cache->reserved_pinned > 0) {
-			len = min(len, cache->reserved_pinned);
-			cache->reserved_pinned -= len;
-			cache->space_info->bytes_reserved += len;
-		}
 		spin_unlock(&cache->lock);
 		spin_unlock(&cache->space_info->lock);
 	}
@@ -4340,11 +4639,8 @@
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct extent_io_tree *unpin;
-	struct btrfs_block_rsv *block_rsv;
-	struct btrfs_block_rsv *next_rsv;
 	u64 start;
 	u64 end;
-	int idx;
 	int ret;
 
 	if (fs_info->pinned_extents == &fs_info->freed_extents[0])
@@ -4367,30 +4663,6 @@
 		cond_resched();
 	}
 
-	mutex_lock(&fs_info->durable_block_rsv_mutex);
-	list_for_each_entry_safe(block_rsv, next_rsv,
-				 &fs_info->durable_block_rsv_list, list) {
-
-		idx = trans->transid & 0x1;
-		if (block_rsv->freed[idx] > 0) {
-			block_rsv_add_bytes(block_rsv,
-					    block_rsv->freed[idx], 0);
-			block_rsv->freed[idx] = 0;
-		}
-		if (atomic_read(&block_rsv->usage) == 0) {
-			btrfs_block_rsv_release(root, block_rsv, (u64)-1);
-
-			if (block_rsv->freed[0] == 0 &&
-			    block_rsv->freed[1] == 0) {
-				list_del_init(&block_rsv->list);
-				kfree(block_rsv);
-			}
-		} else {
-			btrfs_block_rsv_release(root, block_rsv, 0);
-		}
-	}
-	mutex_unlock(&fs_info->durable_block_rsv_mutex);
-
 	return 0;
 }
 
@@ -4668,7 +4940,6 @@
 			   struct extent_buffer *buf,
 			   u64 parent, int last_ref)
 {
-	struct btrfs_block_rsv *block_rsv;
 	struct btrfs_block_group_cache *cache = NULL;
 	int ret;
 
@@ -4683,64 +4954,24 @@
 	if (!last_ref)
 		return;
 
-	block_rsv = get_block_rsv(trans, root);
 	cache = btrfs_lookup_block_group(root->fs_info, buf->start);
-	if (block_rsv->space_info != cache->space_info)
-		goto out;
 
 	if (btrfs_header_generation(buf) == trans->transid) {
 		if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
 			ret = check_ref_cleanup(trans, root, buf->start);
 			if (!ret)
-				goto pin;
+				goto out;
 		}
 
 		if (btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN)) {
 			pin_down_extent(root, cache, buf->start, buf->len, 1);
-			goto pin;
+			goto out;
 		}
 
 		WARN_ON(test_bit(EXTENT_BUFFER_DIRTY, &buf->bflags));
 
 		btrfs_add_free_space(cache, buf->start, buf->len);
-		ret = btrfs_update_reserved_bytes(cache, buf->len, 0, 0);
-		if (ret == -EAGAIN) {
-			/* block group became read-only */
-			btrfs_update_reserved_bytes(cache, buf->len, 0, 1);
-			goto out;
-		}
-
-		ret = 1;
-		spin_lock(&block_rsv->lock);
-		if (block_rsv->reserved < block_rsv->size) {
-			block_rsv->reserved += buf->len;
-			ret = 0;
-		}
-		spin_unlock(&block_rsv->lock);
-
-		if (ret) {
-			spin_lock(&cache->space_info->lock);
-			cache->space_info->bytes_reserved -= buf->len;
-			cache->space_info->reservation_progress++;
-			spin_unlock(&cache->space_info->lock);
-		}
-		goto out;
-	}
-pin:
-	if (block_rsv->durable && !cache->ro) {
-		ret = 0;
-		spin_lock(&cache->lock);
-		if (!cache->ro) {
-			cache->reserved_pinned += buf->len;
-			ret = 1;
-		}
-		spin_unlock(&cache->lock);
-
-		if (ret) {
-			spin_lock(&block_rsv->lock);
-			block_rsv->freed[trans->transid & 0x1] += buf->len;
-			spin_unlock(&block_rsv->lock);
-		}
+		btrfs_update_reserved_bytes(cache, buf->len, RESERVE_FREE);
 	}
 out:
 	/*
@@ -4883,10 +5114,13 @@
 	int last_ptr_loop = 0;
 	int loop = 0;
 	int index = 0;
+	int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ?
+		RESERVE_ALLOC_NO_ACCOUNT : RESERVE_ALLOC;
 	bool found_uncached_bg = false;
 	bool failed_cluster_refill = false;
 	bool failed_alloc = false;
 	bool use_cluster = true;
+	bool have_caching_bg = false;
 	u64 ideal_cache_percent = 0;
 	u64 ideal_cache_offset = 0;
 
@@ -4969,6 +5203,7 @@
 		}
 	}
 search:
+	have_caching_bg = false;
 	down_read(&space_info->groups_sem);
 	list_for_each_entry(block_group, &space_info->block_groups[index],
 			    list) {
@@ -4998,13 +5233,15 @@
 		}
 
 have_block_group:
-		if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+		cached = block_group_cache_done(block_group);
+		if (unlikely(!cached)) {
 			u64 free_percent;
 
+			found_uncached_bg = true;
 			ret = cache_block_group(block_group, trans,
 						orig_root, 1);
 			if (block_group->cached == BTRFS_CACHE_FINISHED)
-				goto have_block_group;
+				goto alloc;
 
 			free_percent = btrfs_block_group_used(&block_group->item);
 			free_percent *= 100;
@@ -5026,7 +5263,6 @@
 							orig_root, 0);
 				BUG_ON(ret);
 			}
-			found_uncached_bg = true;
 
 			/*
 			 * If loop is set for cached only, try the next block
@@ -5036,17 +5272,14 @@
 				goto loop;
 		}
 
-		cached = block_group_cache_done(block_group);
-		if (unlikely(!cached))
-			found_uncached_bg = true;
-
+alloc:
 		if (unlikely(block_group->ro))
 			goto loop;
 
 		spin_lock(&block_group->free_space_ctl->tree_lock);
 		if (cached &&
 		    block_group->free_space_ctl->free_space <
-		    num_bytes + empty_size) {
+		    num_bytes + empty_cluster + empty_size) {
 			spin_unlock(&block_group->free_space_ctl->tree_lock);
 			goto loop;
 		}
@@ -5067,12 +5300,10 @@
 			 * people trying to start a new cluster
 			 */
 			spin_lock(&last_ptr->refill_lock);
-			if (last_ptr->block_group &&
-			    (last_ptr->block_group->ro ||
-			    !block_group_bits(last_ptr->block_group, data))) {
-				offset = 0;
+			if (!last_ptr->block_group ||
+			    last_ptr->block_group->ro ||
+			    !block_group_bits(last_ptr->block_group, data))
 				goto refill_cluster;
-			}
 
 			offset = btrfs_alloc_from_cluster(block_group, last_ptr,
 						 num_bytes, search_start);
@@ -5123,7 +5354,7 @@
 			/* allocate a cluster in this block group */
 			ret = btrfs_find_space_cluster(trans, root,
 					       block_group, last_ptr,
-					       offset, num_bytes,
+					       search_start, num_bytes,
 					       empty_cluster + empty_size);
 			if (ret == 0) {
 				/*
@@ -5177,6 +5408,8 @@
 			failed_alloc = true;
 			goto have_block_group;
 		} else if (!offset) {
+			if (!cached)
+				have_caching_bg = true;
 			goto loop;
 		}
 checks:
@@ -5202,8 +5435,8 @@
 					     search_start - offset);
 		BUG_ON(offset > search_start);
 
-		ret = btrfs_update_reserved_bytes(block_group, num_bytes, 1,
-					    (data & BTRFS_BLOCK_GROUP_DATA));
+		ret = btrfs_update_reserved_bytes(block_group, num_bytes,
+						  alloc_type);
 		if (ret == -EAGAIN) {
 			btrfs_add_free_space(block_group, offset, num_bytes);
 			goto loop;
@@ -5227,6 +5460,9 @@
 	}
 	up_read(&space_info->groups_sem);
 
+	if (!ins->objectid && loop >= LOOP_CACHING_WAIT && have_caching_bg)
+		goto search;
+
 	if (!ins->objectid && ++index < BTRFS_NR_RAID_TYPES)
 		goto search;
 
@@ -5325,7 +5561,8 @@
 	int index = 0;
 
 	spin_lock(&info->lock);
-	printk(KERN_INFO "space_info has %llu free, is %sfull\n",
+	printk(KERN_INFO "space_info %llu has %llu free, is %sfull\n",
+	       (unsigned long long)info->flags,
 	       (unsigned long long)(info->total_bytes - info->bytes_used -
 				    info->bytes_pinned - info->bytes_reserved -
 				    info->bytes_readonly),
@@ -5411,7 +5648,8 @@
 	return ret;
 }
 
-int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len)
+static int __btrfs_free_reserved_extent(struct btrfs_root *root,
+					u64 start, u64 len, int pin)
 {
 	struct btrfs_block_group_cache *cache;
 	int ret = 0;
@@ -5426,8 +5664,12 @@
 	if (btrfs_test_opt(root, DISCARD))
 		ret = btrfs_discard_extent(root, start, len, NULL);
 
-	btrfs_add_free_space(cache, start, len);
-	btrfs_update_reserved_bytes(cache, len, 0, 1);
+	if (pin)
+		pin_down_extent(root, cache, start, len, 1);
+	else {
+		btrfs_add_free_space(cache, start, len);
+		btrfs_update_reserved_bytes(cache, len, RESERVE_FREE);
+	}
 	btrfs_put_block_group(cache);
 
 	trace_btrfs_reserved_extent_free(root, start, len);
@@ -5435,6 +5677,18 @@
 	return ret;
 }
 
+int btrfs_free_reserved_extent(struct btrfs_root *root,
+					u64 start, u64 len)
+{
+	return __btrfs_free_reserved_extent(root, start, len, 0);
+}
+
+int btrfs_free_and_pin_reserved_extent(struct btrfs_root *root,
+				       u64 start, u64 len)
+{
+	return __btrfs_free_reserved_extent(root, start, len, 1);
+}
+
 static int alloc_reserved_file_extent(struct btrfs_trans_handle *trans,
 				      struct btrfs_root *root,
 				      u64 parent, u64 root_objectid,
@@ -5630,7 +5884,8 @@
 		put_caching_control(caching_ctl);
 	}
 
-	ret = btrfs_update_reserved_bytes(block_group, ins->offset, 1, 1);
+	ret = btrfs_update_reserved_bytes(block_group, ins->offset,
+					  RESERVE_ALLOC_NO_ACCOUNT);
 	BUG_ON(ret);
 	btrfs_put_block_group(block_group);
 	ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
@@ -5687,8 +5942,7 @@
 	block_rsv = get_block_rsv(trans, root);
 
 	if (block_rsv->size == 0) {
-		ret = reserve_metadata_bytes(trans, root, block_rsv,
-					     blocksize, 0);
+		ret = reserve_metadata_bytes(root, block_rsv, blocksize, 0);
 		/*
 		 * If we couldn't reserve metadata bytes try and use some from
 		 * the global reserve.
@@ -5708,13 +5962,15 @@
 	if (!ret)
 		return block_rsv;
 	if (ret) {
-		WARN_ON(1);
-		ret = reserve_metadata_bytes(trans, root, block_rsv, blocksize,
-					     0);
+		static DEFINE_RATELIMIT_STATE(_rs,
+				DEFAULT_RATELIMIT_INTERVAL,
+				/*DEFAULT_RATELIMIT_BURST*/ 2);
+		if (__ratelimit(&_rs)) {
+			printk(KERN_DEBUG "btrfs: block rsv returned %d\n", ret);
+			WARN_ON(1);
+		}
+		ret = reserve_metadata_bytes(root, block_rsv, blocksize, 0);
 		if (!ret) {
-			spin_lock(&block_rsv->lock);
-			block_rsv->size += blocksize;
-			spin_unlock(&block_rsv->lock);
 			return block_rsv;
 		} else if (ret && block_rsv != global_rsv) {
 			ret = block_rsv_use_bytes(global_rsv, blocksize);
@@ -6592,12 +6848,9 @@
 		    cache->bytes_super - btrfs_block_group_used(&cache->item);
 
 	if (sinfo->bytes_used + sinfo->bytes_reserved + sinfo->bytes_pinned +
-	    sinfo->bytes_may_use + sinfo->bytes_readonly +
-	    cache->reserved_pinned + num_bytes + min_allocable_bytes <=
-	    sinfo->total_bytes) {
+	    sinfo->bytes_may_use + sinfo->bytes_readonly + num_bytes +
+	    min_allocable_bytes <= sinfo->total_bytes) {
 		sinfo->bytes_readonly += num_bytes;
-		sinfo->bytes_reserved += cache->reserved_pinned;
-		cache->reserved_pinned = 0;
 		cache->ro = 1;
 		ret = 0;
 	}
@@ -6964,7 +7217,8 @@
 					struct btrfs_space_info,
 					list);
 		if (space_info->bytes_pinned > 0 ||
-		    space_info->bytes_reserved > 0) {
+		    space_info->bytes_reserved > 0 ||
+		    space_info->bytes_may_use > 0) {
 			WARN_ON(1);
 			dump_space_info(space_info, 0, 0);
 		}
@@ -7006,14 +7260,12 @@
 		return -ENOMEM;
 	path->reada = 1;
 
-	cache_gen = btrfs_super_cache_generation(&root->fs_info->super_copy);
-	if (cache_gen != 0 &&
-	    btrfs_super_generation(&root->fs_info->super_copy) != cache_gen)
+	cache_gen = btrfs_super_cache_generation(root->fs_info->super_copy);
+	if (btrfs_test_opt(root, SPACE_CACHE) &&
+	    btrfs_super_generation(root->fs_info->super_copy) != cache_gen)
 		need_clear = 1;
 	if (btrfs_test_opt(root, CLEAR_CACHE))
 		need_clear = 1;
-	if (!btrfs_test_opt(root, SPACE_CACHE) && cache_gen)
-		printk(KERN_INFO "btrfs: disk space caching is enabled\n");
 
 	while (1) {
 		ret = find_first_block_group(root, path, &key);
@@ -7252,7 +7504,7 @@
 		goto out;
 	}
 
-	inode = lookup_free_space_inode(root, block_group, path);
+	inode = lookup_free_space_inode(tree_root, block_group, path);
 	if (!IS_ERR(inode)) {
 		ret = btrfs_orphan_add(trans, inode);
 		BUG_ON(ret);
@@ -7268,7 +7520,7 @@
 			spin_unlock(&block_group->lock);
 		}
 		/* One for our lookup ref */
-		iput(inode);
+		btrfs_add_delayed_iput(inode);
 	}
 
 	key.objectid = BTRFS_FREE_SPACE_OBJECTID;
@@ -7339,7 +7591,7 @@
 	int mixed = 0;
 	int ret;
 
-	disk_super = &fs_info->super_copy;
+	disk_super = fs_info->super_copy;
 	if (!btrfs_super_root(disk_super))
 		return 1;
 
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index d418164..be1bf62 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -17,6 +17,7 @@
 #include "compat.h"
 #include "ctree.h"
 #include "btrfs_inode.h"
+#include "volumes.h"
 
 static struct kmem_cache *extent_state_cache;
 static struct kmem_cache *extent_buffer_cache;
@@ -894,6 +895,194 @@
 	goto again;
 }
 
+/**
+ * convert_extent - convert all bits in a given range from one bit to another
+ * @tree:	the io tree to search
+ * @start:	the start offset in bytes
+ * @end:	the end offset in bytes (inclusive)
+ * @bits:	the bits to set in this range
+ * @clear_bits:	the bits to clear in this range
+ * @mask:	the allocation mask
+ *
+ * This will go through and set bits for the given range.  If any states exist
+ * already in this range they are set with the given bit and cleared of the
+ * clear_bits.  This is only meant to be used by things that are mergeable, ie
+ * converting from say DELALLOC to DIRTY.  This is not meant to be used with
+ * boundary bits like LOCK.
+ */
+int convert_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+		       int bits, int clear_bits, gfp_t mask)
+{
+	struct extent_state *state;
+	struct extent_state *prealloc = NULL;
+	struct rb_node *node;
+	int err = 0;
+	u64 last_start;
+	u64 last_end;
+
+again:
+	if (!prealloc && (mask & __GFP_WAIT)) {
+		prealloc = alloc_extent_state(mask);
+		if (!prealloc)
+			return -ENOMEM;
+	}
+
+	spin_lock(&tree->lock);
+	/*
+	 * this search will find all the extents that end after
+	 * our range starts.
+	 */
+	node = tree_search(tree, start);
+	if (!node) {
+		prealloc = alloc_extent_state_atomic(prealloc);
+		if (!prealloc)
+			return -ENOMEM;
+		err = insert_state(tree, prealloc, start, end, &bits);
+		prealloc = NULL;
+		BUG_ON(err == -EEXIST);
+		goto out;
+	}
+	state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
+	last_start = state->start;
+	last_end = state->end;
+
+	/*
+	 * | ---- desired range ---- |
+	 * | state |
+	 *
+	 * Just lock what we found and keep going
+	 */
+	if (state->start == start && state->end <= end) {
+		struct rb_node *next_node;
+
+		set_state_bits(tree, state, &bits);
+		clear_state_bit(tree, state, &clear_bits, 0);
+
+		merge_state(tree, state);
+		if (last_end == (u64)-1)
+			goto out;
+
+		start = last_end + 1;
+		next_node = rb_next(&state->rb_node);
+		if (next_node && start < end && prealloc && !need_resched()) {
+			state = rb_entry(next_node, struct extent_state,
+					 rb_node);
+			if (state->start == start)
+				goto hit_next;
+		}
+		goto search_again;
+	}
+
+	/*
+	 *     | ---- desired range ---- |
+	 * | state |
+	 *   or
+	 * | ------------- state -------------- |
+	 *
+	 * We need to split the extent we found, and may flip bits on
+	 * second half.
+	 *
+	 * If the extent we found extends past our
+	 * range, we just split and search again.  It'll get split
+	 * again the next time though.
+	 *
+	 * If the extent we found is inside our range, we set the
+	 * desired bit on it.
+	 */
+	if (state->start < start) {
+		prealloc = alloc_extent_state_atomic(prealloc);
+		if (!prealloc)
+			return -ENOMEM;
+		err = split_state(tree, state, prealloc, start);
+		BUG_ON(err == -EEXIST);
+		prealloc = NULL;
+		if (err)
+			goto out;
+		if (state->end <= end) {
+			set_state_bits(tree, state, &bits);
+			clear_state_bit(tree, state, &clear_bits, 0);
+			merge_state(tree, state);
+			if (last_end == (u64)-1)
+				goto out;
+			start = last_end + 1;
+		}
+		goto search_again;
+	}
+	/*
+	 * | ---- desired range ---- |
+	 *     | state | or               | state |
+	 *
+	 * There's a hole, we need to insert something in it and
+	 * ignore the extent we found.
+	 */
+	if (state->start > start) {
+		u64 this_end;
+		if (end < last_start)
+			this_end = end;
+		else
+			this_end = last_start - 1;
+
+		prealloc = alloc_extent_state_atomic(prealloc);
+		if (!prealloc)
+			return -ENOMEM;
+
+		/*
+		 * Avoid to free 'prealloc' if it can be merged with
+		 * the later extent.
+		 */
+		err = insert_state(tree, prealloc, start, this_end,
+				   &bits);
+		BUG_ON(err == -EEXIST);
+		if (err) {
+			free_extent_state(prealloc);
+			prealloc = NULL;
+			goto out;
+		}
+		prealloc = NULL;
+		start = this_end + 1;
+		goto search_again;
+	}
+	/*
+	 * | ---- desired range ---- |
+	 *                        | state |
+	 * We need to split the extent, and set the bit
+	 * on the first half
+	 */
+	if (state->start <= end && state->end > end) {
+		prealloc = alloc_extent_state_atomic(prealloc);
+		if (!prealloc)
+			return -ENOMEM;
+
+		err = split_state(tree, state, prealloc, end + 1);
+		BUG_ON(err == -EEXIST);
+
+		set_state_bits(tree, prealloc, &bits);
+		clear_state_bit(tree, prealloc, &clear_bits, 0);
+
+		merge_state(tree, prealloc);
+		prealloc = NULL;
+		goto out;
+	}
+
+	goto search_again;
+
+out:
+	spin_unlock(&tree->lock);
+	if (prealloc)
+		free_extent_state(prealloc);
+
+	return err;
+
+search_again:
+	if (start > end)
+		goto out;
+	spin_unlock(&tree->lock);
+	if (mask & __GFP_WAIT)
+		cond_resched();
+	goto again;
+}
+
 /* wrappers around set/clear extent bit */
 int set_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
 		     gfp_t mask)
@@ -919,7 +1108,7 @@
 			struct extent_state **cached_state, gfp_t mask)
 {
 	return set_extent_bit(tree, start, end,
-			      EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE,
+			      EXTENT_DELALLOC | EXTENT_UPTODATE,
 			      0, NULL, cached_state, mask);
 }
 
@@ -1599,6 +1788,368 @@
 	return 0;
 }
 
+/*
+ * When IO fails, either with EIO or csum verification fails, we
+ * try other mirrors that might have a good copy of the data.  This
+ * io_failure_record is used to record state as we go through all the
+ * mirrors.  If another mirror has good data, the page is set up to date
+ * and things continue.  If a good mirror can't be found, the original
+ * bio end_io callback is called to indicate things have failed.
+ */
+struct io_failure_record {
+	struct page *page;
+	u64 start;
+	u64 len;
+	u64 logical;
+	unsigned long bio_flags;
+	int this_mirror;
+	int failed_mirror;
+	int in_validation;
+};
+
+static int free_io_failure(struct inode *inode, struct io_failure_record *rec,
+				int did_repair)
+{
+	int ret;
+	int err = 0;
+	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+
+	set_state_private(failure_tree, rec->start, 0);
+	ret = clear_extent_bits(failure_tree, rec->start,
+				rec->start + rec->len - 1,
+				EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
+	if (ret)
+		err = ret;
+
+	if (did_repair) {
+		ret = clear_extent_bits(&BTRFS_I(inode)->io_tree, rec->start,
+					rec->start + rec->len - 1,
+					EXTENT_DAMAGED, GFP_NOFS);
+		if (ret && !err)
+			err = ret;
+	}
+
+	kfree(rec);
+	return err;
+}
+
+static void repair_io_failure_callback(struct bio *bio, int err)
+{
+	complete(bio->bi_private);
+}
+
+/*
+ * this bypasses the standard btrfs submit functions deliberately, as
+ * the standard behavior is to write all copies in a raid setup. here we only
+ * want to write the one bad copy. so we do the mapping for ourselves and issue
+ * submit_bio directly.
+ * to avoid any synchonization issues, wait for the data after writing, which
+ * actually prevents the read that triggered the error from finishing.
+ * currently, there can be no more than two copies of every data bit. thus,
+ * exactly one rewrite is required.
+ */
+int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
+			u64 length, u64 logical, struct page *page,
+			int mirror_num)
+{
+	struct bio *bio;
+	struct btrfs_device *dev;
+	DECLARE_COMPLETION_ONSTACK(compl);
+	u64 map_length = 0;
+	u64 sector;
+	struct btrfs_bio *bbio = NULL;
+	int ret;
+
+	BUG_ON(!mirror_num);
+
+	bio = bio_alloc(GFP_NOFS, 1);
+	if (!bio)
+		return -EIO;
+	bio->bi_private = &compl;
+	bio->bi_end_io = repair_io_failure_callback;
+	bio->bi_size = 0;
+	map_length = length;
+
+	ret = btrfs_map_block(map_tree, WRITE, logical,
+			      &map_length, &bbio, mirror_num);
+	if (ret) {
+		bio_put(bio);
+		return -EIO;
+	}
+	BUG_ON(mirror_num != bbio->mirror_num);
+	sector = bbio->stripes[mirror_num-1].physical >> 9;
+	bio->bi_sector = sector;
+	dev = bbio->stripes[mirror_num-1].dev;
+	kfree(bbio);
+	if (!dev || !dev->bdev || !dev->writeable) {
+		bio_put(bio);
+		return -EIO;
+	}
+	bio->bi_bdev = dev->bdev;
+	bio_add_page(bio, page, length, start-page_offset(page));
+	submit_bio(WRITE_SYNC, bio);
+	wait_for_completion(&compl);
+
+	if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+		/* try to remap that extent elsewhere? */
+		bio_put(bio);
+		return -EIO;
+	}
+
+	printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
+			"sector %llu)\n", page->mapping->host->i_ino, start,
+			dev->name, sector);
+
+	bio_put(bio);
+	return 0;
+}
+
+/*
+ * each time an IO finishes, we do a fast check in the IO failure tree
+ * to see if we need to process or clean up an io_failure_record
+ */
+static int clean_io_failure(u64 start, struct page *page)
+{
+	u64 private;
+	u64 private_failure;
+	struct io_failure_record *failrec;
+	struct btrfs_mapping_tree *map_tree;
+	struct extent_state *state;
+	int num_copies;
+	int did_repair = 0;
+	int ret;
+	struct inode *inode = page->mapping->host;
+
+	private = 0;
+	ret = count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
+				(u64)-1, 1, EXTENT_DIRTY, 0);
+	if (!ret)
+		return 0;
+
+	ret = get_state_private(&BTRFS_I(inode)->io_failure_tree, start,
+				&private_failure);
+	if (ret)
+		return 0;
+
+	failrec = (struct io_failure_record *)(unsigned long) private_failure;
+	BUG_ON(!failrec->this_mirror);
+
+	if (failrec->in_validation) {
+		/* there was no real error, just free the record */
+		pr_debug("clean_io_failure: freeing dummy error at %llu\n",
+			 failrec->start);
+		did_repair = 1;
+		goto out;
+	}
+
+	spin_lock(&BTRFS_I(inode)->io_tree.lock);
+	state = find_first_extent_bit_state(&BTRFS_I(inode)->io_tree,
+					    failrec->start,
+					    EXTENT_LOCKED);
+	spin_unlock(&BTRFS_I(inode)->io_tree.lock);
+
+	if (state && state->start == failrec->start) {
+		map_tree = &BTRFS_I(inode)->root->fs_info->mapping_tree;
+		num_copies = btrfs_num_copies(map_tree, failrec->logical,
+						failrec->len);
+		if (num_copies > 1)  {
+			ret = repair_io_failure(map_tree, start, failrec->len,
+						failrec->logical, page,
+						failrec->failed_mirror);
+			did_repair = !ret;
+		}
+	}
+
+out:
+	if (!ret)
+		ret = free_io_failure(inode, failrec, did_repair);
+
+	return ret;
+}
+
+/*
+ * this is a generic handler for readpage errors (default
+ * readpage_io_failed_hook). if other copies exist, read those and write back
+ * good data to the failed position. does not investigate in remapping the
+ * failed extent elsewhere, hoping the device will be smart enough to do this as
+ * needed
+ */
+
+static int bio_readpage_error(struct bio *failed_bio, struct page *page,
+				u64 start, u64 end, int failed_mirror,
+				struct extent_state *state)
+{
+	struct io_failure_record *failrec = NULL;
+	u64 private;
+	struct extent_map *em;
+	struct inode *inode = page->mapping->host;
+	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
+	struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree;
+	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+	struct bio *bio;
+	int num_copies;
+	int ret;
+	int read_mode;
+	u64 logical;
+
+	BUG_ON(failed_bio->bi_rw & REQ_WRITE);
+
+	ret = get_state_private(failure_tree, start, &private);
+	if (ret) {
+		failrec = kzalloc(sizeof(*failrec), GFP_NOFS);
+		if (!failrec)
+			return -ENOMEM;
+		failrec->start = start;
+		failrec->len = end - start + 1;
+		failrec->this_mirror = 0;
+		failrec->bio_flags = 0;
+		failrec->in_validation = 0;
+
+		read_lock(&em_tree->lock);
+		em = lookup_extent_mapping(em_tree, start, failrec->len);
+		if (!em) {
+			read_unlock(&em_tree->lock);
+			kfree(failrec);
+			return -EIO;
+		}
+
+		if (em->start > start || em->start + em->len < start) {
+			free_extent_map(em);
+			em = NULL;
+		}
+		read_unlock(&em_tree->lock);
+
+		if (!em || IS_ERR(em)) {
+			kfree(failrec);
+			return -EIO;
+		}
+		logical = start - em->start;
+		logical = em->block_start + logical;
+		if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
+			logical = em->block_start;
+			failrec->bio_flags = EXTENT_BIO_COMPRESSED;
+			extent_set_compress_type(&failrec->bio_flags,
+						 em->compress_type);
+		}
+		pr_debug("bio_readpage_error: (new) logical=%llu, start=%llu, "
+			 "len=%llu\n", logical, start, failrec->len);
+		failrec->logical = logical;
+		free_extent_map(em);
+
+		/* set the bits in the private failure tree */
+		ret = set_extent_bits(failure_tree, start, end,
+					EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
+		if (ret >= 0)
+			ret = set_state_private(failure_tree, start,
+						(u64)(unsigned long)failrec);
+		/* set the bits in the inode's tree */
+		if (ret >= 0)
+			ret = set_extent_bits(tree, start, end, EXTENT_DAMAGED,
+						GFP_NOFS);
+		if (ret < 0) {
+			kfree(failrec);
+			return ret;
+		}
+	} else {
+		failrec = (struct io_failure_record *)(unsigned long)private;
+		pr_debug("bio_readpage_error: (found) logical=%llu, "
+			 "start=%llu, len=%llu, validation=%d\n",
+			 failrec->logical, failrec->start, failrec->len,
+			 failrec->in_validation);
+		/*
+		 * when data can be on disk more than twice, add to failrec here
+		 * (e.g. with a list for failed_mirror) to make
+		 * clean_io_failure() clean all those errors at once.
+		 */
+	}
+	num_copies = btrfs_num_copies(
+			      &BTRFS_I(inode)->root->fs_info->mapping_tree,
+			      failrec->logical, failrec->len);
+	if (num_copies == 1) {
+		/*
+		 * we only have a single copy of the data, so don't bother with
+		 * all the retry and error correction code that follows. no
+		 * matter what the error is, it is very likely to persist.
+		 */
+		pr_debug("bio_readpage_error: cannot repair, num_copies == 1. "
+			 "state=%p, num_copies=%d, next_mirror %d, "
+			 "failed_mirror %d\n", state, num_copies,
+			 failrec->this_mirror, failed_mirror);
+		free_io_failure(inode, failrec, 0);
+		return -EIO;
+	}
+
+	if (!state) {
+		spin_lock(&tree->lock);
+		state = find_first_extent_bit_state(tree, failrec->start,
+						    EXTENT_LOCKED);
+		if (state && state->start != failrec->start)
+			state = NULL;
+		spin_unlock(&tree->lock);
+	}
+
+	/*
+	 * there are two premises:
+	 *	a) deliver good data to the caller
+	 *	b) correct the bad sectors on disk
+	 */
+	if (failed_bio->bi_vcnt > 1) {
+		/*
+		 * to fulfill b), we need to know the exact failing sectors, as
+		 * we don't want to rewrite any more than the failed ones. thus,
+		 * we need separate read requests for the failed bio
+		 *
+		 * if the following BUG_ON triggers, our validation request got
+		 * merged. we need separate requests for our algorithm to work.
+		 */
+		BUG_ON(failrec->in_validation);
+		failrec->in_validation = 1;
+		failrec->this_mirror = failed_mirror;
+		read_mode = READ_SYNC | REQ_FAILFAST_DEV;
+	} else {
+		/*
+		 * we're ready to fulfill a) and b) alongside. get a good copy
+		 * of the failed sector and if we succeed, we have setup
+		 * everything for repair_io_failure to do the rest for us.
+		 */
+		if (failrec->in_validation) {
+			BUG_ON(failrec->this_mirror != failed_mirror);
+			failrec->in_validation = 0;
+			failrec->this_mirror = 0;
+		}
+		failrec->failed_mirror = failed_mirror;
+		failrec->this_mirror++;
+		if (failrec->this_mirror == failed_mirror)
+			failrec->this_mirror++;
+		read_mode = READ_SYNC;
+	}
+
+	if (!state || failrec->this_mirror > num_copies) {
+		pr_debug("bio_readpage_error: (fail) state=%p, num_copies=%d, "
+			 "next_mirror %d, failed_mirror %d\n", state,
+			 num_copies, failrec->this_mirror, failed_mirror);
+		free_io_failure(inode, failrec, 0);
+		return -EIO;
+	}
+
+	bio = bio_alloc(GFP_NOFS, 1);
+	bio->bi_private = state;
+	bio->bi_end_io = failed_bio->bi_end_io;
+	bio->bi_sector = failrec->logical >> 9;
+	bio->bi_bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
+	bio->bi_size = 0;
+
+	bio_add_page(bio, page, failrec->len, start - page_offset(page));
+
+	pr_debug("bio_readpage_error: submitting new read[%#x] to "
+		 "this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
+		 failrec->this_mirror, num_copies, failrec->in_validation);
+
+	tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
+					failrec->bio_flags, 0);
+	return 0;
+}
+
 /* lots and lots of room for performance fixes in the end_bio funcs */
 
 /*
@@ -1697,6 +2248,9 @@
 		struct extent_state *cached = NULL;
 		struct extent_state *state;
 
+		pr_debug("end_bio_extent_readpage: bi_vcnt=%d, idx=%d, err=%d, "
+			 "mirror=%ld\n", bio->bi_vcnt, bio->bi_idx, err,
+			 (long int)bio->bi_bdev);
 		tree = &BTRFS_I(page->mapping->host)->io_tree;
 
 		start = ((u64)page->index << PAGE_CACHE_SHIFT) +
@@ -1727,12 +2281,26 @@
 							      state);
 			if (ret)
 				uptodate = 0;
+			else
+				clean_io_failure(start, page);
 		}
-		if (!uptodate && tree->ops &&
-		    tree->ops->readpage_io_failed_hook) {
-			ret = tree->ops->readpage_io_failed_hook(bio, page,
-							 start, end, NULL);
+		if (!uptodate) {
+			int failed_mirror;
+			failed_mirror = (int)(unsigned long)bio->bi_bdev;
+			/*
+			 * The generic bio_readpage_error handles errors the
+			 * following way: If possible, new read requests are
+			 * created and submitted and will end up in
+			 * end_bio_extent_readpage as well (if we're lucky, not
+			 * in the !uptodate case). In that case it returns 0 and
+			 * we just go on with the next page in our bio. If it
+			 * can't handle the error it will return -EIO and we
+			 * remain responsible for that page.
+			 */
+			ret = bio_readpage_error(bio, page, start, end,
+							failed_mirror, NULL);
 			if (ret == 0) {
+error_handled:
 				uptodate =
 					test_bit(BIO_UPTODATE, &bio->bi_flags);
 				if (err)
@@ -1740,6 +2308,13 @@
 				uncache_state(&cached);
 				continue;
 			}
+			if (tree->ops && tree->ops->readpage_io_failed_hook) {
+				ret = tree->ops->readpage_io_failed_hook(
+							bio, page, start, end,
+							failed_mirror, state);
+				if (ret == 0)
+					goto error_handled;
+			}
 		}
 
 		if (uptodate) {
@@ -1811,6 +2386,7 @@
 					   mirror_num, bio_flags, start);
 	else
 		submit_bio(rw, bio);
+
 	if (bio_flagged(bio, BIO_EOPNOTSUPP))
 		ret = -EOPNOTSUPP;
 	bio_put(bio);
@@ -2076,16 +2652,16 @@
 }
 
 int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
-			    get_extent_t *get_extent)
+			    get_extent_t *get_extent, int mirror_num)
 {
 	struct bio *bio = NULL;
 	unsigned long bio_flags = 0;
 	int ret;
 
-	ret = __extent_read_full_page(tree, page, get_extent, &bio, 0,
+	ret = __extent_read_full_page(tree, page, get_extent, &bio, mirror_num,
 				      &bio_flags);
 	if (bio)
-		ret = submit_one_bio(READ, bio, 0, bio_flags);
+		ret = submit_one_bio(READ, bio, mirror_num, bio_flags);
 	return ret;
 }
 
@@ -2136,6 +2712,7 @@
 	int compressed;
 	int write_flags;
 	unsigned long nr_written = 0;
+	bool fill_delalloc = true;
 
 	if (wbc->sync_mode == WB_SYNC_ALL)
 		write_flags = WRITE_SYNC;
@@ -2145,6 +2722,9 @@
 	trace___extent_writepage(page, inode, wbc);
 
 	WARN_ON(!PageLocked(page));
+
+	ClearPageError(page);
+
 	pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
 	if (page->index > end_index ||
 	   (page->index == end_index && !pg_offset)) {
@@ -2166,10 +2746,13 @@
 
 	set_page_extent_mapped(page);
 
+	if (!tree->ops || !tree->ops->fill_delalloc)
+		fill_delalloc = false;
+
 	delalloc_start = start;
 	delalloc_end = 0;
 	page_started = 0;
-	if (!epd->extent_locked) {
+	if (!epd->extent_locked && fill_delalloc) {
 		u64 delalloc_to_write = 0;
 		/*
 		 * make sure the wbc mapping index is at least updated
@@ -2421,10 +3004,16 @@
 			 * swizzled back from swapper_space to tmpfs file
 			 * mapping
 			 */
-			if (tree->ops && tree->ops->write_cache_pages_lock_hook)
-				tree->ops->write_cache_pages_lock_hook(page);
-			else
-				lock_page(page);
+			if (tree->ops &&
+			    tree->ops->write_cache_pages_lock_hook) {
+				tree->ops->write_cache_pages_lock_hook(page,
+							       data, flush_fn);
+			} else {
+				if (!trylock_page(page)) {
+					flush_fn(data);
+					lock_page(page);
+				}
+			}
 
 			if (unlikely(page->mapping != mapping)) {
 				unlock_page(page);
@@ -2790,6 +3379,9 @@
 		return -ENOMEM;
 	path->leave_spinning = 1;
 
+	start = ALIGN(start, BTRFS_I(inode)->root->sectorsize);
+	len = ALIGN(len, BTRFS_I(inode)->root->sectorsize);
+
 	/*
 	 * lookup the last file extent.  We're not using i_size here
 	 * because there might be preallocation past i_size
@@ -2837,7 +3429,7 @@
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
 			 &cached_state, GFP_NOFS);
 
-	em = get_extent_skip_holes(inode, off, last_for_get_extent,
+	em = get_extent_skip_holes(inode, start, last_for_get_extent,
 				   get_extent);
 	if (!em)
 		goto out;
@@ -2926,7 +3518,7 @@
 	return ret;
 }
 
-static inline struct page *extent_buffer_page(struct extent_buffer *eb,
+inline struct page *extent_buffer_page(struct extent_buffer *eb,
 					      unsigned long i)
 {
 	struct page *p;
@@ -2951,7 +3543,7 @@
 	return p;
 }
 
-static inline unsigned long num_extent_pages(u64 start, u64 len)
+inline unsigned long num_extent_pages(u64 start, u64 len)
 {
 	return ((start + len + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) -
 		(start >> PAGE_CACHE_SHIFT);
@@ -3204,6 +3796,7 @@
 						PAGECACHE_TAG_DIRTY);
 		}
 		spin_unlock_irq(&page->mapping->tree_lock);
+		ClearPageError(page);
 		unlock_page(page);
 	}
 	return 0;
@@ -3349,8 +3942,7 @@
 }
 
 int read_extent_buffer_pages(struct extent_io_tree *tree,
-			     struct extent_buffer *eb,
-			     u64 start, int wait,
+			     struct extent_buffer *eb, u64 start, int wait,
 			     get_extent_t *get_extent, int mirror_num)
 {
 	unsigned long i;
@@ -3386,7 +3978,7 @@
 	num_pages = num_extent_pages(eb->start, eb->len);
 	for (i = start_i; i < num_pages; i++) {
 		page = extent_buffer_page(eb, i);
-		if (!wait) {
+		if (wait == WAIT_NONE) {
 			if (!trylock_page(page))
 				goto unlock_exit;
 		} else {
@@ -3430,7 +4022,7 @@
 	if (bio)
 		submit_one_bio(READ, bio, mirror_num, bio_flags);
 
-	if (ret || !wait)
+	if (ret || wait != WAIT_COMPLETE)
 		return ret;
 
 	for (i = start_i; i < num_pages; i++) {
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 7b2f0c3..7604c30 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -17,6 +17,8 @@
 #define EXTENT_NODATASUM (1 << 10)
 #define EXTENT_DO_ACCOUNTING (1 << 11)
 #define EXTENT_FIRST_DELALLOC (1 << 12)
+#define EXTENT_NEED_WAIT (1 << 13)
+#define EXTENT_DAMAGED (1 << 14)
 #define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
 #define EXTENT_CTLBITS (EXTENT_DO_ACCOUNTING | EXTENT_FIRST_DELALLOC)
 
@@ -32,6 +34,7 @@
 #define EXTENT_BUFFER_BLOCKING 1
 #define EXTENT_BUFFER_DIRTY 2
 #define EXTENT_BUFFER_CORRUPT 3
+#define EXTENT_BUFFER_READAHEAD 4	/* this got triggered by readahead */
 
 /* these are flags for extent_clear_unlock_delalloc */
 #define EXTENT_CLEAR_UNLOCK_PAGE 0x1
@@ -67,7 +70,7 @@
 			      unsigned long bio_flags);
 	int (*readpage_io_hook)(struct page *page, u64 start, u64 end);
 	int (*readpage_io_failed_hook)(struct bio *bio, struct page *page,
-				       u64 start, u64 end,
+				       u64 start, u64 end, int failed_mirror,
 				       struct extent_state *state);
 	int (*writepage_io_failed_hook)(struct bio *bio, struct page *page,
 					u64 start, u64 end,
@@ -85,7 +88,8 @@
 				  struct extent_state *other);
 	void (*split_extent_hook)(struct inode *inode,
 				  struct extent_state *orig, u64 split);
-	int (*write_cache_pages_lock_hook)(struct page *page);
+	int (*write_cache_pages_lock_hook)(struct page *page, void *data,
+					   void (*flush_fn)(void *));
 };
 
 struct extent_io_tree {
@@ -185,7 +189,7 @@
 int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
 		    gfp_t mask);
 int extent_read_full_page(struct extent_io_tree *tree, struct page *page,
-			  get_extent_t *get_extent);
+			  get_extent_t *get_extent, int mirror_num);
 int __init extent_io_init(void);
 void extent_io_exit(void);
 
@@ -214,6 +218,8 @@
 		     gfp_t mask);
 int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
 		       gfp_t mask);
+int convert_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
+		       int bits, int clear_bits, gfp_t mask);
 int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
 			struct extent_state **cached_state, gfp_t mask);
 int find_first_extent_bit(struct extent_io_tree *tree, u64 start,
@@ -248,9 +254,14 @@
 struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree,
 					 u64 start, unsigned long len);
 void free_extent_buffer(struct extent_buffer *eb);
+#define WAIT_NONE	0
+#define WAIT_COMPLETE	1
+#define WAIT_PAGE_LOCK	2
 int read_extent_buffer_pages(struct extent_io_tree *tree,
 			     struct extent_buffer *eb, u64 start, int wait,
 			     get_extent_t *get_extent, int mirror_num);
+unsigned long num_extent_pages(u64 start, u64 len);
+struct page *extent_buffer_page(struct extent_buffer *eb, unsigned long i);
 
 static inline void extent_buffer_get(struct extent_buffer *eb)
 {
@@ -300,4 +311,10 @@
 struct bio *
 btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
 		gfp_t gfp_flags);
+
+struct btrfs_mapping_tree;
+
+int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
+			u64 length, u64 logical, struct page *page,
+			int mirror_num);
 #endif
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index a1cb782..c7fb3a4 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -91,8 +91,7 @@
 	struct btrfs_csum_item *item;
 	struct extent_buffer *leaf;
 	u64 csum_offset = 0;
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 	int csums_in_item;
 
 	file_key.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
@@ -162,8 +161,7 @@
 	u64 item_last_offset = 0;
 	u64 disk_bytenr;
 	u32 diff;
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 	int ret;
 	struct btrfs_path *path;
 	struct btrfs_csum_item *item = NULL;
@@ -290,7 +288,7 @@
 	int ret;
 	size_t size;
 	u64 csum_end;
-	u16 csum_size = btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -492,8 +490,7 @@
 				      u64 bytenr, u64 len)
 {
 	struct extent_buffer *leaf;
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 	u64 csum_end;
 	u64 end_byte = bytenr + len;
 	u32 blocksize_bits = root->fs_info->sb->s_blocksize_bits;
@@ -549,8 +546,7 @@
 	u64 csum_end;
 	struct extent_buffer *leaf;
 	int ret;
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 	int blocksize_bits = root->fs_info->sb->s_blocksize_bits;
 
 	root = root->fs_info->csum_root;
@@ -676,8 +672,7 @@
 	struct btrfs_sector_sum *sector_sum;
 	u32 nritems;
 	u32 ins_size;
-	u16 csum_size =
-		btrfs_super_csum_size(&root->fs_info->super_copy);
+	u16 csum_size = btrfs_super_csum_size(root->fs_info->super_copy);
 
 	path = btrfs_alloc_path();
 	if (!path)
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 1266f6e..dafdfa0 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1069,6 +1069,7 @@
 	int i;
 	unsigned long index = pos >> PAGE_CACHE_SHIFT;
 	struct inode *inode = fdentry(file)->d_inode;
+	gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
 	int err = 0;
 	int faili = 0;
 	u64 start_pos;
@@ -1080,7 +1081,7 @@
 again:
 	for (i = 0; i < num_pages; i++) {
 		pages[i] = find_or_create_page(inode->i_mapping, index + i,
-					       GFP_NOFS);
+					       mask);
 		if (!pages[i]) {
 			faili = i - 1;
 			err = -ENOMEM;
@@ -1615,10 +1616,6 @@
 			goto out;
 	}
 
-	ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
-	if (ret)
-		goto out;
-
 	locked_end = alloc_end - 1;
 	while (1) {
 		struct btrfs_ordered_extent *ordered;
@@ -1664,11 +1661,27 @@
 		if (em->block_start == EXTENT_MAP_HOLE ||
 		    (cur_offset >= inode->i_size &&
 		     !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
+
+			/*
+			 * Make sure we have enough space before we do the
+			 * allocation.
+			 */
+			ret = btrfs_check_data_free_space(inode, last_byte -
+							  cur_offset);
+			if (ret) {
+				free_extent_map(em);
+				break;
+			}
+
 			ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
 							last_byte - cur_offset,
 							1 << inode->i_blkbits,
 							offset + len,
 							&alloc_hint);
+
+			/* Let go of our reservation. */
+			btrfs_free_reserved_data_space(inode, last_byte -
+						       cur_offset);
 			if (ret < 0) {
 				free_extent_map(em);
 				break;
@@ -1694,8 +1707,6 @@
 	}
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
 			     &cached_state, GFP_NOFS);
-
-	btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
 out:
 	mutex_unlock(&inode->i_mutex);
 	return ret;
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 41ac927..ec23d43 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/math64.h>
+#include <linux/ratelimit.h>
 #include "ctree.h"
 #include "free-space-cache.h"
 #include "transaction.h"
@@ -84,6 +85,7 @@
 				      *block_group, struct btrfs_path *path)
 {
 	struct inode *inode = NULL;
+	u32 flags = BTRFS_INODE_NODATASUM | BTRFS_INODE_NODATACOW;
 
 	spin_lock(&block_group->lock);
 	if (block_group->inode)
@@ -98,13 +100,14 @@
 		return inode;
 
 	spin_lock(&block_group->lock);
-	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM) {
+	if (!((BTRFS_I(inode)->flags & flags) == flags)) {
 		printk(KERN_INFO "Old style space inode found, converting.\n");
-		BTRFS_I(inode)->flags &= ~BTRFS_INODE_NODATASUM;
+		BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM |
+			BTRFS_INODE_NODATACOW;
 		block_group->disk_cache_state = BTRFS_DC_CLEAR;
 	}
 
-	if (!btrfs_fs_closing(root->fs_info)) {
+	if (!block_group->iref) {
 		block_group->inode = igrab(inode);
 		block_group->iref = 1;
 	}
@@ -122,12 +125,17 @@
 	struct btrfs_free_space_header *header;
 	struct btrfs_inode_item *inode_item;
 	struct extent_buffer *leaf;
+	u64 flags = BTRFS_INODE_NOCOMPRESS | BTRFS_INODE_PREALLOC;
 	int ret;
 
 	ret = btrfs_insert_empty_inode(trans, root, path, ino);
 	if (ret)
 		return ret;
 
+	/* We inline crc's for the free disk space cache */
+	if (ino != BTRFS_FREE_INO_OBJECTID)
+		flags |= BTRFS_INODE_NODATASUM | BTRFS_INODE_NODATACOW;
+
 	leaf = path->nodes[0];
 	inode_item = btrfs_item_ptr(leaf, path->slots[0],
 				    struct btrfs_inode_item);
@@ -140,8 +148,7 @@
 	btrfs_set_inode_uid(leaf, inode_item, 0);
 	btrfs_set_inode_gid(leaf, inode_item, 0);
 	btrfs_set_inode_mode(leaf, inode_item, S_IFREG | 0600);
-	btrfs_set_inode_flags(leaf, inode_item, BTRFS_INODE_NOCOMPRESS |
-			      BTRFS_INODE_PREALLOC);
+	btrfs_set_inode_flags(leaf, inode_item, flags);
 	btrfs_set_inode_nlink(leaf, inode_item, 1);
 	btrfs_set_inode_transid(leaf, inode_item, trans->transid);
 	btrfs_set_inode_block_group(leaf, inode_item, offset);
@@ -191,16 +198,24 @@
 				    struct inode *inode)
 {
 	struct btrfs_block_rsv *rsv;
+	u64 needed_bytes;
 	loff_t oldsize;
 	int ret = 0;
 
 	rsv = trans->block_rsv;
-	trans->block_rsv = root->orphan_block_rsv;
-	ret = btrfs_block_rsv_check(trans, root,
-				    root->orphan_block_rsv,
-				    0, 5);
-	if (ret)
-		return ret;
+	trans->block_rsv = &root->fs_info->global_block_rsv;
+
+	/* 1 for slack space, 1 for updating the inode */
+	needed_bytes = btrfs_calc_trunc_metadata_size(root, 1) +
+		btrfs_calc_trans_metadata_size(root, 1);
+
+	spin_lock(&trans->block_rsv->lock);
+	if (trans->block_rsv->reserved < needed_bytes) {
+		spin_unlock(&trans->block_rsv->lock);
+		trans->block_rsv = rsv;
+		return -ENOSPC;
+	}
+	spin_unlock(&trans->block_rsv->lock);
 
 	oldsize = i_size_read(inode);
 	btrfs_i_size_write(inode, 0);
@@ -213,13 +228,15 @@
 	ret = btrfs_truncate_inode_items(trans, root, inode,
 					 0, BTRFS_EXTENT_DATA_KEY);
 
-	trans->block_rsv = rsv;
 	if (ret) {
+		trans->block_rsv = rsv;
 		WARN_ON(1);
 		return ret;
 	}
 
 	ret = btrfs_update_inode(trans, root, inode);
+	trans->block_rsv = rsv;
+
 	return ret;
 }
 
@@ -242,26 +259,348 @@
 	return 0;
 }
 
+struct io_ctl {
+	void *cur, *orig;
+	struct page *page;
+	struct page **pages;
+	struct btrfs_root *root;
+	unsigned long size;
+	int index;
+	int num_pages;
+	unsigned check_crcs:1;
+};
+
+static int io_ctl_init(struct io_ctl *io_ctl, struct inode *inode,
+		       struct btrfs_root *root)
+{
+	memset(io_ctl, 0, sizeof(struct io_ctl));
+	io_ctl->num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
+		PAGE_CACHE_SHIFT;
+	io_ctl->pages = kzalloc(sizeof(struct page *) * io_ctl->num_pages,
+				GFP_NOFS);
+	if (!io_ctl->pages)
+		return -ENOMEM;
+	io_ctl->root = root;
+	if (btrfs_ino(inode) != BTRFS_FREE_INO_OBJECTID)
+		io_ctl->check_crcs = 1;
+	return 0;
+}
+
+static void io_ctl_free(struct io_ctl *io_ctl)
+{
+	kfree(io_ctl->pages);
+}
+
+static void io_ctl_unmap_page(struct io_ctl *io_ctl)
+{
+	if (io_ctl->cur) {
+		kunmap(io_ctl->page);
+		io_ctl->cur = NULL;
+		io_ctl->orig = NULL;
+	}
+}
+
+static void io_ctl_map_page(struct io_ctl *io_ctl, int clear)
+{
+	WARN_ON(io_ctl->cur);
+	BUG_ON(io_ctl->index >= io_ctl->num_pages);
+	io_ctl->page = io_ctl->pages[io_ctl->index++];
+	io_ctl->cur = kmap(io_ctl->page);
+	io_ctl->orig = io_ctl->cur;
+	io_ctl->size = PAGE_CACHE_SIZE;
+	if (clear)
+		memset(io_ctl->cur, 0, PAGE_CACHE_SIZE);
+}
+
+static void io_ctl_drop_pages(struct io_ctl *io_ctl)
+{
+	int i;
+
+	io_ctl_unmap_page(io_ctl);
+
+	for (i = 0; i < io_ctl->num_pages; i++) {
+		ClearPageChecked(io_ctl->pages[i]);
+		unlock_page(io_ctl->pages[i]);
+		page_cache_release(io_ctl->pages[i]);
+	}
+}
+
+static int io_ctl_prepare_pages(struct io_ctl *io_ctl, struct inode *inode,
+				int uptodate)
+{
+	struct page *page;
+	gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
+	int i;
+
+	for (i = 0; i < io_ctl->num_pages; i++) {
+		page = find_or_create_page(inode->i_mapping, i, mask);
+		if (!page) {
+			io_ctl_drop_pages(io_ctl);
+			return -ENOMEM;
+		}
+		io_ctl->pages[i] = page;
+		if (uptodate && !PageUptodate(page)) {
+			btrfs_readpage(NULL, page);
+			lock_page(page);
+			if (!PageUptodate(page)) {
+				printk(KERN_ERR "btrfs: error reading free "
+				       "space cache\n");
+				io_ctl_drop_pages(io_ctl);
+				return -EIO;
+			}
+		}
+	}
+
+	for (i = 0; i < io_ctl->num_pages; i++) {
+		clear_page_dirty_for_io(io_ctl->pages[i]);
+		set_page_extent_mapped(io_ctl->pages[i]);
+	}
+
+	return 0;
+}
+
+static void io_ctl_set_generation(struct io_ctl *io_ctl, u64 generation)
+{
+	u64 *val;
+
+	io_ctl_map_page(io_ctl, 1);
+
+	/*
+	 * Skip the csum areas.  If we don't check crcs then we just have a
+	 * 64bit chunk at the front of the first page.
+	 */
+	if (io_ctl->check_crcs) {
+		io_ctl->cur += (sizeof(u32) * io_ctl->num_pages);
+		io_ctl->size -= sizeof(u64) + (sizeof(u32) * io_ctl->num_pages);
+	} else {
+		io_ctl->cur += sizeof(u64);
+		io_ctl->size -= sizeof(u64) * 2;
+	}
+
+	val = io_ctl->cur;
+	*val = cpu_to_le64(generation);
+	io_ctl->cur += sizeof(u64);
+}
+
+static int io_ctl_check_generation(struct io_ctl *io_ctl, u64 generation)
+{
+	u64 *gen;
+
+	/*
+	 * Skip the crc area.  If we don't check crcs then we just have a 64bit
+	 * chunk at the front of the first page.
+	 */
+	if (io_ctl->check_crcs) {
+		io_ctl->cur += sizeof(u32) * io_ctl->num_pages;
+		io_ctl->size -= sizeof(u64) +
+			(sizeof(u32) * io_ctl->num_pages);
+	} else {
+		io_ctl->cur += sizeof(u64);
+		io_ctl->size -= sizeof(u64) * 2;
+	}
+
+	gen = io_ctl->cur;
+	if (le64_to_cpu(*gen) != generation) {
+		printk_ratelimited(KERN_ERR "btrfs: space cache generation "
+				   "(%Lu) does not match inode (%Lu)\n", *gen,
+				   generation);
+		io_ctl_unmap_page(io_ctl);
+		return -EIO;
+	}
+	io_ctl->cur += sizeof(u64);
+	return 0;
+}
+
+static void io_ctl_set_crc(struct io_ctl *io_ctl, int index)
+{
+	u32 *tmp;
+	u32 crc = ~(u32)0;
+	unsigned offset = 0;
+
+	if (!io_ctl->check_crcs) {
+		io_ctl_unmap_page(io_ctl);
+		return;
+	}
+
+	if (index == 0)
+		offset = sizeof(u32) * io_ctl->num_pages;;
+
+	crc = btrfs_csum_data(io_ctl->root, io_ctl->orig + offset, crc,
+			      PAGE_CACHE_SIZE - offset);
+	btrfs_csum_final(crc, (char *)&crc);
+	io_ctl_unmap_page(io_ctl);
+	tmp = kmap(io_ctl->pages[0]);
+	tmp += index;
+	*tmp = crc;
+	kunmap(io_ctl->pages[0]);
+}
+
+static int io_ctl_check_crc(struct io_ctl *io_ctl, int index)
+{
+	u32 *tmp, val;
+	u32 crc = ~(u32)0;
+	unsigned offset = 0;
+
+	if (!io_ctl->check_crcs) {
+		io_ctl_map_page(io_ctl, 0);
+		return 0;
+	}
+
+	if (index == 0)
+		offset = sizeof(u32) * io_ctl->num_pages;
+
+	tmp = kmap(io_ctl->pages[0]);
+	tmp += index;
+	val = *tmp;
+	kunmap(io_ctl->pages[0]);
+
+	io_ctl_map_page(io_ctl, 0);
+	crc = btrfs_csum_data(io_ctl->root, io_ctl->orig + offset, crc,
+			      PAGE_CACHE_SIZE - offset);
+	btrfs_csum_final(crc, (char *)&crc);
+	if (val != crc) {
+		printk_ratelimited(KERN_ERR "btrfs: csum mismatch on free "
+				   "space cache\n");
+		io_ctl_unmap_page(io_ctl);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int io_ctl_add_entry(struct io_ctl *io_ctl, u64 offset, u64 bytes,
+			    void *bitmap)
+{
+	struct btrfs_free_space_entry *entry;
+
+	if (!io_ctl->cur)
+		return -ENOSPC;
+
+	entry = io_ctl->cur;
+	entry->offset = cpu_to_le64(offset);
+	entry->bytes = cpu_to_le64(bytes);
+	entry->type = (bitmap) ? BTRFS_FREE_SPACE_BITMAP :
+		BTRFS_FREE_SPACE_EXTENT;
+	io_ctl->cur += sizeof(struct btrfs_free_space_entry);
+	io_ctl->size -= sizeof(struct btrfs_free_space_entry);
+
+	if (io_ctl->size >= sizeof(struct btrfs_free_space_entry))
+		return 0;
+
+	io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+
+	/* No more pages to map */
+	if (io_ctl->index >= io_ctl->num_pages)
+		return 0;
+
+	/* map the next page */
+	io_ctl_map_page(io_ctl, 1);
+	return 0;
+}
+
+static int io_ctl_add_bitmap(struct io_ctl *io_ctl, void *bitmap)
+{
+	if (!io_ctl->cur)
+		return -ENOSPC;
+
+	/*
+	 * If we aren't at the start of the current page, unmap this one and
+	 * map the next one if there is any left.
+	 */
+	if (io_ctl->cur != io_ctl->orig) {
+		io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+		if (io_ctl->index >= io_ctl->num_pages)
+			return -ENOSPC;
+		io_ctl_map_page(io_ctl, 0);
+	}
+
+	memcpy(io_ctl->cur, bitmap, PAGE_CACHE_SIZE);
+	io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+	if (io_ctl->index < io_ctl->num_pages)
+		io_ctl_map_page(io_ctl, 0);
+	return 0;
+}
+
+static void io_ctl_zero_remaining_pages(struct io_ctl *io_ctl)
+{
+	/*
+	 * If we're not on the boundary we know we've modified the page and we
+	 * need to crc the page.
+	 */
+	if (io_ctl->cur != io_ctl->orig)
+		io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+	else
+		io_ctl_unmap_page(io_ctl);
+
+	while (io_ctl->index < io_ctl->num_pages) {
+		io_ctl_map_page(io_ctl, 1);
+		io_ctl_set_crc(io_ctl, io_ctl->index - 1);
+	}
+}
+
+static int io_ctl_read_entry(struct io_ctl *io_ctl,
+			    struct btrfs_free_space *entry, u8 *type)
+{
+	struct btrfs_free_space_entry *e;
+	int ret;
+
+	if (!io_ctl->cur) {
+		ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+		if (ret)
+			return ret;
+	}
+
+	e = io_ctl->cur;
+	entry->offset = le64_to_cpu(e->offset);
+	entry->bytes = le64_to_cpu(e->bytes);
+	*type = e->type;
+	io_ctl->cur += sizeof(struct btrfs_free_space_entry);
+	io_ctl->size -= sizeof(struct btrfs_free_space_entry);
+
+	if (io_ctl->size >= sizeof(struct btrfs_free_space_entry))
+		return 0;
+
+	io_ctl_unmap_page(io_ctl);
+
+	return 0;
+}
+
+static int io_ctl_read_bitmap(struct io_ctl *io_ctl,
+			      struct btrfs_free_space *entry)
+{
+	int ret;
+
+	ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+	if (ret)
+		return ret;
+
+	memcpy(entry->bitmap, io_ctl->cur, PAGE_CACHE_SIZE);
+	io_ctl_unmap_page(io_ctl);
+
+	return 0;
+}
+
 int __load_free_space_cache(struct btrfs_root *root, struct inode *inode,
 			    struct btrfs_free_space_ctl *ctl,
 			    struct btrfs_path *path, u64 offset)
 {
 	struct btrfs_free_space_header *header;
 	struct extent_buffer *leaf;
-	struct page *page;
+	struct io_ctl io_ctl;
 	struct btrfs_key key;
+	struct btrfs_free_space *e, *n;
 	struct list_head bitmaps;
 	u64 num_entries;
 	u64 num_bitmaps;
 	u64 generation;
-	pgoff_t index = 0;
+	u8 type;
 	int ret = 0;
 
 	INIT_LIST_HEAD(&bitmaps);
 
 	/* Nothing in the space cache, goodbye */
 	if (!i_size_read(inode))
-		goto out;
+		return 0;
 
 	key.objectid = BTRFS_FREE_SPACE_OBJECTID;
 	key.offset = offset;
@@ -269,11 +608,10 @@
 
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	if (ret < 0)
-		goto out;
+		return 0;
 	else if (ret > 0) {
 		btrfs_release_path(path);
-		ret = 0;
-		goto out;
+		return 0;
 	}
 
 	ret = -1;
@@ -291,169 +629,102 @@
 		       " not match free space cache generation (%llu)\n",
 		       (unsigned long long)BTRFS_I(inode)->generation,
 		       (unsigned long long)generation);
-		goto out;
+		return 0;
 	}
 
 	if (!num_entries)
-		goto out;
+		return 0;
 
+	io_ctl_init(&io_ctl, inode, root);
 	ret = readahead_cache(inode);
 	if (ret)
 		goto out;
 
-	while (1) {
-		struct btrfs_free_space_entry *entry;
-		struct btrfs_free_space *e;
-		void *addr;
-		unsigned long offset = 0;
-		int need_loop = 0;
+	ret = io_ctl_prepare_pages(&io_ctl, inode, 1);
+	if (ret)
+		goto out;
 
-		if (!num_entries && !num_bitmaps)
-			break;
+	ret = io_ctl_check_crc(&io_ctl, 0);
+	if (ret)
+		goto free_cache;
 
-		page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
-		if (!page)
+	ret = io_ctl_check_generation(&io_ctl, generation);
+	if (ret)
+		goto free_cache;
+
+	while (num_entries) {
+		e = kmem_cache_zalloc(btrfs_free_space_cachep,
+				      GFP_NOFS);
+		if (!e)
 			goto free_cache;
 
-		if (!PageUptodate(page)) {
-			btrfs_readpage(NULL, page);
-			lock_page(page);
-			if (!PageUptodate(page)) {
-				unlock_page(page);
-				page_cache_release(page);
-				printk(KERN_ERR "btrfs: error reading free "
-				       "space cache\n");
-				goto free_cache;
-			}
+		ret = io_ctl_read_entry(&io_ctl, e, &type);
+		if (ret) {
+			kmem_cache_free(btrfs_free_space_cachep, e);
+			goto free_cache;
 		}
-		addr = kmap(page);
 
-		if (index == 0) {
-			u64 *gen;
-
-			/*
-			 * We put a bogus crc in the front of the first page in
-			 * case old kernels try to mount a fs with the new
-			 * format to make sure they discard the cache.
-			 */
-			addr += sizeof(u64);
-			offset += sizeof(u64);
-
-			gen = addr;
-			if (*gen != BTRFS_I(inode)->generation) {
-				printk(KERN_ERR "btrfs: space cache generation"
-				       " (%llu) does not match inode (%llu)\n",
-				       (unsigned long long)*gen,
-				       (unsigned long long)
-				       BTRFS_I(inode)->generation);
-				kunmap(page);
-				unlock_page(page);
-				page_cache_release(page);
-				goto free_cache;
-			}
-			addr += sizeof(u64);
-			offset += sizeof(u64);
+		if (!e->bytes) {
+			kmem_cache_free(btrfs_free_space_cachep, e);
+			goto free_cache;
 		}
-		entry = addr;
 
-		while (1) {
-			if (!num_entries)
-				break;
-
-			need_loop = 1;
-			e = kmem_cache_zalloc(btrfs_free_space_cachep,
-					      GFP_NOFS);
-			if (!e) {
-				kunmap(page);
-				unlock_page(page);
-				page_cache_release(page);
-				goto free_cache;
-			}
-
-			e->offset = le64_to_cpu(entry->offset);
-			e->bytes = le64_to_cpu(entry->bytes);
-			if (!e->bytes) {
-				kunmap(page);
+		if (type == BTRFS_FREE_SPACE_EXTENT) {
+			spin_lock(&ctl->tree_lock);
+			ret = link_free_space(ctl, e);
+			spin_unlock(&ctl->tree_lock);
+			if (ret) {
+				printk(KERN_ERR "Duplicate entries in "
+				       "free space cache, dumping\n");
 				kmem_cache_free(btrfs_free_space_cachep, e);
-				unlock_page(page);
-				page_cache_release(page);
 				goto free_cache;
 			}
-
-			if (entry->type == BTRFS_FREE_SPACE_EXTENT) {
-				spin_lock(&ctl->tree_lock);
-				ret = link_free_space(ctl, e);
-				spin_unlock(&ctl->tree_lock);
-				if (ret) {
-					printk(KERN_ERR "Duplicate entries in "
-					       "free space cache, dumping\n");
-					kunmap(page);
-					unlock_page(page);
-					page_cache_release(page);
-					goto free_cache;
-				}
-			} else {
-				e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
-				if (!e->bitmap) {
-					kunmap(page);
-					kmem_cache_free(
-						btrfs_free_space_cachep, e);
-					unlock_page(page);
-					page_cache_release(page);
-					goto free_cache;
-				}
-				spin_lock(&ctl->tree_lock);
-				ret = link_free_space(ctl, e);
-				ctl->total_bitmaps++;
-				ctl->op->recalc_thresholds(ctl);
-				spin_unlock(&ctl->tree_lock);
-				if (ret) {
-					printk(KERN_ERR "Duplicate entries in "
-					       "free space cache, dumping\n");
-					kunmap(page);
-					unlock_page(page);
-					page_cache_release(page);
-					goto free_cache;
-				}
-				list_add_tail(&e->list, &bitmaps);
+		} else {
+			BUG_ON(!num_bitmaps);
+			num_bitmaps--;
+			e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+			if (!e->bitmap) {
+				kmem_cache_free(
+					btrfs_free_space_cachep, e);
+				goto free_cache;
 			}
-
-			num_entries--;
-			offset += sizeof(struct btrfs_free_space_entry);
-			if (offset + sizeof(struct btrfs_free_space_entry) >=
-			    PAGE_CACHE_SIZE)
-				break;
-			entry++;
+			spin_lock(&ctl->tree_lock);
+			ret = link_free_space(ctl, e);
+			ctl->total_bitmaps++;
+			ctl->op->recalc_thresholds(ctl);
+			spin_unlock(&ctl->tree_lock);
+			if (ret) {
+				printk(KERN_ERR "Duplicate entries in "
+				       "free space cache, dumping\n");
+				kmem_cache_free(btrfs_free_space_cachep, e);
+				goto free_cache;
+			}
+			list_add_tail(&e->list, &bitmaps);
 		}
 
-		/*
-		 * We read an entry out of this page, we need to move on to the
-		 * next page.
-		 */
-		if (need_loop) {
-			kunmap(page);
-			goto next;
-		}
-
-		/*
-		 * We add the bitmaps at the end of the entries in order that
-		 * the bitmap entries are added to the cache.
-		 */
-		e = list_entry(bitmaps.next, struct btrfs_free_space, list);
-		list_del_init(&e->list);
-		memcpy(e->bitmap, addr, PAGE_CACHE_SIZE);
-		kunmap(page);
-		num_bitmaps--;
-next:
-		unlock_page(page);
-		page_cache_release(page);
-		index++;
+		num_entries--;
 	}
 
+	io_ctl_unmap_page(&io_ctl);
+
+	/*
+	 * We add the bitmaps at the end of the entries in order that
+	 * the bitmap entries are added to the cache.
+	 */
+	list_for_each_entry_safe(e, n, &bitmaps, list) {
+		list_del_init(&e->list);
+		ret = io_ctl_read_bitmap(&io_ctl, e);
+		if (ret)
+			goto free_cache;
+	}
+
+	io_ctl_drop_pages(&io_ctl);
 	ret = 1;
 out:
+	io_ctl_free(&io_ctl);
 	return ret;
 free_cache:
+	io_ctl_drop_pages(&io_ctl);
 	__btrfs_remove_free_space_cache(ctl);
 	goto out;
 }
@@ -465,7 +736,7 @@
 	struct btrfs_root *root = fs_info->tree_root;
 	struct inode *inode;
 	struct btrfs_path *path;
-	int ret;
+	int ret = 0;
 	bool matched;
 	u64 used = btrfs_block_group_used(&block_group->item);
 
@@ -497,6 +768,14 @@
 		return 0;
 	}
 
+	/* We may have converted the inode and made the cache invalid. */
+	spin_lock(&block_group->lock);
+	if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
+		spin_unlock(&block_group->lock);
+		goto out;
+	}
+	spin_unlock(&block_group->lock);
+
 	ret = __load_free_space_cache(fs_info->tree_root, inode, ctl,
 				      path, block_group->key.objectid);
 	btrfs_free_path(path);
@@ -530,6 +809,19 @@
 	return ret;
 }
 
+/**
+ * __btrfs_write_out_cache - write out cached info to an inode
+ * @root - the root the inode belongs to
+ * @ctl - the free space cache we are going to write out
+ * @block_group - the block_group for this cache if it belongs to a block_group
+ * @trans - the trans handle
+ * @path - the path to use
+ * @offset - the offset for the key we'll insert
+ *
+ * This function writes out a free space cache struct to disk for quick recovery
+ * on mount.  This will return 0 if it was successfull in writing the cache out,
+ * and -1 if it was not.
+ */
 int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode,
 			    struct btrfs_free_space_ctl *ctl,
 			    struct btrfs_block_group_cache *block_group,
@@ -540,42 +832,24 @@
 	struct extent_buffer *leaf;
 	struct rb_node *node;
 	struct list_head *pos, *n;
-	struct page **pages;
-	struct page *page;
 	struct extent_state *cached_state = NULL;
 	struct btrfs_free_cluster *cluster = NULL;
 	struct extent_io_tree *unpin = NULL;
+	struct io_ctl io_ctl;
 	struct list_head bitmap_list;
 	struct btrfs_key key;
 	u64 start, end, len;
-	u64 bytes = 0;
-	u32 crc = ~(u32)0;
-	int index = 0, num_pages = 0;
 	int entries = 0;
 	int bitmaps = 0;
-	int ret = -1;
-	bool next_page = false;
-	bool out_of_space = false;
+	int ret;
+	int err = -1;
 
 	INIT_LIST_HEAD(&bitmap_list);
 
-	node = rb_first(&ctl->free_space_offset);
-	if (!node)
-		return 0;
-
 	if (!i_size_read(inode))
 		return -1;
 
-	num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-		PAGE_CACHE_SHIFT;
-
-	filemap_write_and_wait(inode->i_mapping);
-	btrfs_wait_ordered_range(inode, inode->i_size &
-				 ~(root->sectorsize - 1), (u64)-1);
-
-	pages = kzalloc(sizeof(struct page *) * num_pages, GFP_NOFS);
-	if (!pages)
-		return -1;
+	io_ctl_init(&io_ctl, inode, root);
 
 	/* Get the cluster for this block_group if it exists */
 	if (block_group && !list_empty(&block_group->cluster_list))
@@ -589,30 +863,9 @@
 	 */
 	unpin = root->fs_info->pinned_extents;
 
-	/*
-	 * Lock all pages first so we can lock the extent safely.
-	 *
-	 * NOTE: Because we hold the ref the entire time we're going to write to
-	 * the page find_get_page should never fail, so we don't do a check
-	 * after find_get_page at this point.  Just putting this here so people
-	 * know and don't freak out.
-	 */
-	while (index < num_pages) {
-		page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
-		if (!page) {
-			int i;
+	/* Lock all pages first so we can lock the extent safely. */
+	io_ctl_prepare_pages(&io_ctl, inode, 0);
 
-			for (i = 0; i < num_pages; i++) {
-				unlock_page(pages[i]);
-				page_cache_release(pages[i]);
-			}
-			goto out;
-		}
-		pages[index] = page;
-		index++;
-	}
-
-	index = 0;
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
 			 0, &cached_state, GFP_NOFS);
 
@@ -623,189 +876,111 @@
 	if (block_group)
 		start = block_group->key.objectid;
 
+	node = rb_first(&ctl->free_space_offset);
+	if (!node && cluster) {
+		node = rb_first(&cluster->root);
+		cluster = NULL;
+	}
+
+	/* Make sure we can fit our crcs into the first page */
+	if (io_ctl.check_crcs &&
+	    (io_ctl.num_pages * sizeof(u32)) >= PAGE_CACHE_SIZE) {
+		WARN_ON(1);
+		goto out_nospc;
+	}
+
+	io_ctl_set_generation(&io_ctl, trans->transid);
+
 	/* Write out the extent entries */
-	do {
-		struct btrfs_free_space_entry *entry;
-		void *addr, *orig;
-		unsigned long offset = 0;
+	while (node) {
+		struct btrfs_free_space *e;
 
-		next_page = false;
+		e = rb_entry(node, struct btrfs_free_space, offset_index);
+		entries++;
 
-		if (index >= num_pages) {
-			out_of_space = true;
+		ret = io_ctl_add_entry(&io_ctl, e->offset, e->bytes,
+				       e->bitmap);
+		if (ret)
+			goto out_nospc;
+
+		if (e->bitmap) {
+			list_add_tail(&e->list, &bitmap_list);
+			bitmaps++;
+		}
+		node = rb_next(node);
+		if (!node && cluster) {
+			node = rb_first(&cluster->root);
+			cluster = NULL;
+		}
+	}
+
+	/*
+	 * We want to add any pinned extents to our free space cache
+	 * so we don't leak the space
+	 */
+	while (block_group && (start < block_group->key.objectid +
+			       block_group->key.offset)) {
+		ret = find_first_extent_bit(unpin, start, &start, &end,
+					    EXTENT_DIRTY);
+		if (ret) {
+			ret = 0;
 			break;
 		}
 
-		page = pages[index];
+		/* This pinned extent is out of our range */
+		if (start >= block_group->key.objectid +
+		    block_group->key.offset)
+			break;
 
-		orig = addr = kmap(page);
-		if (index == 0) {
-			u64 *gen;
+		len = block_group->key.objectid +
+			block_group->key.offset - start;
+		len = min(len, end + 1 - start);
 
-			/*
-			 * We're going to put in a bogus crc for this page to
-			 * make sure that old kernels who aren't aware of this
-			 * format will be sure to discard the cache.
-			 */
-			addr += sizeof(u64);
-			offset += sizeof(u64);
+		entries++;
+		ret = io_ctl_add_entry(&io_ctl, start, len, NULL);
+		if (ret)
+			goto out_nospc;
 
-			gen = addr;
-			*gen = trans->transid;
-			addr += sizeof(u64);
-			offset += sizeof(u64);
-		}
-		entry = addr;
-
-		memset(addr, 0, PAGE_CACHE_SIZE - offset);
-		while (node && !next_page) {
-			struct btrfs_free_space *e;
-
-			e = rb_entry(node, struct btrfs_free_space, offset_index);
-			entries++;
-
-			entry->offset = cpu_to_le64(e->offset);
-			entry->bytes = cpu_to_le64(e->bytes);
-			if (e->bitmap) {
-				entry->type = BTRFS_FREE_SPACE_BITMAP;
-				list_add_tail(&e->list, &bitmap_list);
-				bitmaps++;
-			} else {
-				entry->type = BTRFS_FREE_SPACE_EXTENT;
-			}
-			node = rb_next(node);
-			if (!node && cluster) {
-				node = rb_first(&cluster->root);
-				cluster = NULL;
-			}
-			offset += sizeof(struct btrfs_free_space_entry);
-			if (offset + sizeof(struct btrfs_free_space_entry) >=
-			    PAGE_CACHE_SIZE)
-				next_page = true;
-			entry++;
-		}
-
-		/*
-		 * We want to add any pinned extents to our free space cache
-		 * so we don't leak the space
-		 */
-		while (block_group && !next_page &&
-		       (start < block_group->key.objectid +
-			block_group->key.offset)) {
-			ret = find_first_extent_bit(unpin, start, &start, &end,
-						    EXTENT_DIRTY);
-			if (ret) {
-				ret = 0;
-				break;
-			}
-
-			/* This pinned extent is out of our range */
-			if (start >= block_group->key.objectid +
-			    block_group->key.offset)
-				break;
-
-			len = block_group->key.objectid +
-				block_group->key.offset - start;
-			len = min(len, end + 1 - start);
-
-			entries++;
-			entry->offset = cpu_to_le64(start);
-			entry->bytes = cpu_to_le64(len);
-			entry->type = BTRFS_FREE_SPACE_EXTENT;
-
-			start = end + 1;
-			offset += sizeof(struct btrfs_free_space_entry);
-			if (offset + sizeof(struct btrfs_free_space_entry) >=
-			    PAGE_CACHE_SIZE)
-				next_page = true;
-			entry++;
-		}
-
-		/* Generate bogus crc value */
-		if (index == 0) {
-			u32 *tmp;
-			crc = btrfs_csum_data(root, orig + sizeof(u64), crc,
-					      PAGE_CACHE_SIZE - sizeof(u64));
-			btrfs_csum_final(crc, (char *)&crc);
-			crc++;
-			tmp = orig;
-			*tmp = crc;
-		}
-
-		kunmap(page);
-
-		bytes += PAGE_CACHE_SIZE;
-
-		index++;
-	} while (node || next_page);
+		start = end + 1;
+	}
 
 	/* Write out the bitmaps */
 	list_for_each_safe(pos, n, &bitmap_list) {
-		void *addr;
 		struct btrfs_free_space *entry =
 			list_entry(pos, struct btrfs_free_space, list);
 
-		if (index >= num_pages) {
-			out_of_space = true;
-			break;
-		}
-		page = pages[index];
-
-		addr = kmap(page);
-		memcpy(addr, entry->bitmap, PAGE_CACHE_SIZE);
-		kunmap(page);
-		bytes += PAGE_CACHE_SIZE;
-
+		ret = io_ctl_add_bitmap(&io_ctl, entry->bitmap);
+		if (ret)
+			goto out_nospc;
 		list_del_init(&entry->list);
-		index++;
-	}
-
-	if (out_of_space) {
-		btrfs_drop_pages(pages, num_pages);
-		unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
-				     i_size_read(inode) - 1, &cached_state,
-				     GFP_NOFS);
-		ret = 0;
-		goto out;
 	}
 
 	/* Zero out the rest of the pages just to make sure */
-	while (index < num_pages) {
-		void *addr;
+	io_ctl_zero_remaining_pages(&io_ctl);
 
-		page = pages[index];
-		addr = kmap(page);
-		memset(addr, 0, PAGE_CACHE_SIZE);
-		kunmap(page);
-		bytes += PAGE_CACHE_SIZE;
-		index++;
-	}
-
-	ret = btrfs_dirty_pages(root, inode, pages, num_pages, 0,
-					    bytes, &cached_state);
-	btrfs_drop_pages(pages, num_pages);
+	ret = btrfs_dirty_pages(root, inode, io_ctl.pages, io_ctl.num_pages,
+				0, i_size_read(inode), &cached_state);
+	io_ctl_drop_pages(&io_ctl);
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
 			     i_size_read(inode) - 1, &cached_state, GFP_NOFS);
 
-	if (ret) {
-		ret = 0;
+	if (ret)
 		goto out;
-	}
 
-	BTRFS_I(inode)->generation = trans->transid;
 
-	filemap_write_and_wait(inode->i_mapping);
+	ret = filemap_write_and_wait(inode->i_mapping);
+	if (ret)
+		goto out;
 
 	key.objectid = BTRFS_FREE_SPACE_OBJECTID;
 	key.offset = offset;
 	key.type = 0;
 
-	ret = btrfs_search_slot(trans, root, &key, path, 1, 1);
+	ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
 	if (ret < 0) {
-		ret = -1;
-		clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
-				 EXTENT_DIRTY | EXTENT_DELALLOC |
-				 EXTENT_DO_ACCOUNTING, 0, 0, NULL, GFP_NOFS);
+		clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, inode->i_size - 1,
+				 EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0, NULL,
+				 GFP_NOFS);
 		goto out;
 	}
 	leaf = path->nodes[0];
@@ -816,15 +991,16 @@
 		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
 		if (found_key.objectid != BTRFS_FREE_SPACE_OBJECTID ||
 		    found_key.offset != offset) {
-			ret = -1;
-			clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1,
-					 EXTENT_DIRTY | EXTENT_DELALLOC |
-					 EXTENT_DO_ACCOUNTING, 0, 0, NULL,
-					 GFP_NOFS);
+			clear_extent_bit(&BTRFS_I(inode)->io_tree, 0,
+					 inode->i_size - 1,
+					 EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0,
+					 NULL, GFP_NOFS);
 			btrfs_release_path(path);
 			goto out;
 		}
 	}
+
+	BTRFS_I(inode)->generation = trans->transid;
 	header = btrfs_item_ptr(leaf, path->slots[0],
 				struct btrfs_free_space_header);
 	btrfs_set_free_space_entries(leaf, header, entries);
@@ -833,16 +1009,26 @@
 	btrfs_mark_buffer_dirty(leaf);
 	btrfs_release_path(path);
 
-	ret = 1;
-
+	err = 0;
 out:
-	kfree(pages);
-	if (ret != 1) {
-		invalidate_inode_pages2_range(inode->i_mapping, 0, index);
+	io_ctl_free(&io_ctl);
+	if (err) {
+		invalidate_inode_pages2(inode->i_mapping);
 		BTRFS_I(inode)->generation = 0;
 	}
 	btrfs_update_inode(trans, root, inode);
-	return ret;
+	return err;
+
+out_nospc:
+	list_for_each_safe(pos, n, &bitmap_list) {
+		struct btrfs_free_space *entry =
+			list_entry(pos, struct btrfs_free_space, list);
+		list_del_init(&entry->list);
+	}
+	io_ctl_drop_pages(&io_ctl);
+	unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
+			     i_size_read(inode) - 1, &cached_state, GFP_NOFS);
+	goto out;
 }
 
 int btrfs_write_out_cache(struct btrfs_root *root,
@@ -869,14 +1055,15 @@
 
 	ret = __btrfs_write_out_cache(root, inode, ctl, block_group, trans,
 				      path, block_group->key.objectid);
-	if (ret < 0) {
+	if (ret) {
 		spin_lock(&block_group->lock);
 		block_group->disk_cache_state = BTRFS_DC_ERROR;
 		spin_unlock(&block_group->lock);
 		ret = 0;
-
+#ifdef DEBUG
 		printk(KERN_ERR "btrfs: failed to write free space cace "
 		       "for block group %llu\n", block_group->key.objectid);
+#endif
 	}
 
 	iput(inode);
@@ -1283,6 +1470,7 @@
 {
 	info->offset = offset_to_bitmap(ctl, offset);
 	info->bytes = 0;
+	INIT_LIST_HEAD(&info->list);
 	link_free_space(ctl, info);
 	ctl->total_bitmaps++;
 
@@ -1662,7 +1850,13 @@
 		info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset),
 					  1, 0);
 		if (!info) {
-			WARN_ON(1);
+			/* the tree logging code might be calling us before we
+			 * have fully loaded the free space rbtree for this
+			 * block group.  So it is possible the entry won't
+			 * be in the rbtree yet at all.  The caching code
+			 * will make sure not to put it in the rbtree if
+			 * the logging code has pinned it.
+			 */
 			goto out_lock;
 		}
 	}
@@ -1701,6 +1895,7 @@
 			ctl->total_bitmaps--;
 		}
 		kmem_cache_free(btrfs_free_space_cachep, info);
+		ret = 0;
 		goto out_lock;
 	}
 
@@ -1708,7 +1903,8 @@
 		unlink_free_space(ctl, info);
 		info->offset += bytes;
 		info->bytes -= bytes;
-		link_free_space(ctl, info);
+		ret = link_free_space(ctl, info);
+		WARN_ON(ret);
 		goto out_lock;
 	}
 
@@ -2124,6 +2320,7 @@
 
 	if (!found) {
 		start = i;
+		cluster->max_size = 0;
 		found = true;
 	}
 
@@ -2267,16 +2464,23 @@
 {
 	struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
 	struct btrfs_free_space *entry;
-	struct rb_node *node;
 	int ret = -ENOSPC;
+	u64 bitmap_offset = offset_to_bitmap(ctl, offset);
 
 	if (ctl->total_bitmaps == 0)
 		return -ENOSPC;
 
 	/*
-	 * First check our cached list of bitmaps and see if there is an entry
-	 * here that will work.
+	 * The bitmap that covers offset won't be in the list unless offset
+	 * is just its start offset.
 	 */
+	entry = list_first_entry(bitmaps, struct btrfs_free_space, list);
+	if (entry->offset != bitmap_offset) {
+		entry = tree_search_offset(ctl, bitmap_offset, 1, 0);
+		if (entry && list_empty(&entry->list))
+			list_add(&entry->list, bitmaps);
+	}
+
 	list_for_each_entry(entry, bitmaps, list) {
 		if (entry->bytes < min_bytes)
 			continue;
@@ -2287,38 +2491,10 @@
 	}
 
 	/*
-	 * If we do have entries on our list and we are here then we didn't find
-	 * anything, so go ahead and get the next entry after the last entry in
-	 * this list and start the search from there.
+	 * The bitmaps list has all the bitmaps that record free space
+	 * starting after offset, so no more search is required.
 	 */
-	if (!list_empty(bitmaps)) {
-		entry = list_entry(bitmaps->prev, struct btrfs_free_space,
-				   list);
-		node = rb_next(&entry->offset_index);
-		if (!node)
-			return -ENOSPC;
-		entry = rb_entry(node, struct btrfs_free_space, offset_index);
-		goto search;
-	}
-
-	entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1);
-	if (!entry)
-		return -ENOSPC;
-
-search:
-	node = &entry->offset_index;
-	do {
-		entry = rb_entry(node, struct btrfs_free_space, offset_index);
-		node = rb_next(&entry->offset_index);
-		if (!entry->bitmap)
-			continue;
-		if (entry->bytes < min_bytes)
-			continue;
-		ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
-					   bytes, min_bytes);
-	} while (ret && node);
-
-	return ret;
+	return -ENOSPC;
 }
 
 /*
@@ -2336,8 +2512,8 @@
 			     u64 offset, u64 bytes, u64 empty_size)
 {
 	struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
-	struct list_head bitmaps;
 	struct btrfs_free_space *entry, *tmp;
+	LIST_HEAD(bitmaps);
 	u64 min_bytes;
 	int ret;
 
@@ -2376,7 +2552,6 @@
 		goto out;
 	}
 
-	INIT_LIST_HEAD(&bitmaps);
 	ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset,
 				      bytes, min_bytes);
 	if (ret)
@@ -2472,9 +2647,19 @@
 		spin_unlock(&ctl->tree_lock);
 
 		if (bytes >= minlen) {
-			int update_ret;
-			update_ret = btrfs_update_reserved_bytes(block_group,
-								 bytes, 1, 1);
+			struct btrfs_space_info *space_info;
+			int update = 0;
+
+			space_info = block_group->space_info;
+			spin_lock(&space_info->lock);
+			spin_lock(&block_group->lock);
+			if (!block_group->ro) {
+				block_group->reserved += bytes;
+				space_info->bytes_reserved += bytes;
+				update = 1;
+			}
+			spin_unlock(&block_group->lock);
+			spin_unlock(&space_info->lock);
 
 			ret = btrfs_error_discard_extent(fs_info->extent_root,
 							 start,
@@ -2482,9 +2667,16 @@
 							 &actually_trimmed);
 
 			btrfs_add_free_space(block_group, start, bytes);
-			if (!update_ret)
-				btrfs_update_reserved_bytes(block_group,
-							    bytes, 0, 1);
+			if (update) {
+				spin_lock(&space_info->lock);
+				spin_lock(&block_group->lock);
+				if (block_group->ro)
+					space_info->bytes_readonly += bytes;
+				block_group->reserved -= bytes;
+				space_info->bytes_reserved -= bytes;
+				spin_unlock(&space_info->lock);
+				spin_unlock(&block_group->lock);
+			}
 
 			if (ret)
 				break;
@@ -2643,9 +2835,13 @@
 		return 0;
 
 	ret = __btrfs_write_out_cache(root, inode, ctl, NULL, trans, path, 0);
-	if (ret < 0)
+	if (ret) {
+		btrfs_delalloc_release_metadata(inode, inode->i_size);
+#ifdef DEBUG
 		printk(KERN_ERR "btrfs: failed to write free ino cache "
 		       "for root %llu\n", root->root_key.objectid);
+#endif
+	}
 
 	iput(inode);
 	return ret;
diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index b4087e0..f8962a9 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -398,6 +398,8 @@
 	struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
 	struct btrfs_path *path;
 	struct inode *inode;
+	struct btrfs_block_rsv *rsv;
+	u64 num_bytes;
 	u64 alloc_hint = 0;
 	int ret;
 	int prealloc;
@@ -421,11 +423,26 @@
 	if (!path)
 		return -ENOMEM;
 
+	rsv = trans->block_rsv;
+	trans->block_rsv = &root->fs_info->trans_block_rsv;
+
+	num_bytes = trans->bytes_reserved;
+	/*
+	 * 1 item for inode item insertion if need
+	 * 3 items for inode item update (in the worst case)
+	 * 1 item for free space object
+	 * 3 items for pre-allocation
+	 */
+	trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8);
+	ret = btrfs_block_rsv_add_noflush(root, trans->block_rsv,
+					  trans->bytes_reserved);
+	if (ret)
+		goto out;
 again:
 	inode = lookup_free_ino_inode(root, path);
 	if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) {
 		ret = PTR_ERR(inode);
-		goto out;
+		goto out_release;
 	}
 
 	if (IS_ERR(inode)) {
@@ -434,7 +451,7 @@
 
 		ret = create_free_ino_inode(root, trans, path);
 		if (ret)
-			goto out;
+			goto out_release;
 		goto again;
 	}
 
@@ -465,21 +482,26 @@
 	/* Just to make sure we have enough space */
 	prealloc += 8 * PAGE_CACHE_SIZE;
 
-	ret = btrfs_check_data_free_space(inode, prealloc);
+	ret = btrfs_delalloc_reserve_space(inode, prealloc);
 	if (ret)
 		goto out_put;
 
 	ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, prealloc,
 					      prealloc, prealloc, &alloc_hint);
-	if (ret)
+	if (ret) {
+		btrfs_delalloc_release_space(inode, prealloc);
 		goto out_put;
+	}
 	btrfs_free_reserved_data_space(inode, prealloc);
 
+	ret = btrfs_write_out_ino_cache(root, trans, path);
 out_put:
 	iput(inode);
+out_release:
+	btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
 out:
-	if (ret == 0)
-		ret = btrfs_write_out_ino_cache(root, trans, path);
+	trans->block_rsv = rsv;
+	trans->bytes_reserved = num_bytes;
 
 	btrfs_free_path(path);
 	return ret;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 75686a6..2c984f7 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -45,10 +45,10 @@
 #include "btrfs_inode.h"
 #include "ioctl.h"
 #include "print-tree.h"
-#include "volumes.h"
 #include "ordered-data.h"
 #include "xattr.h"
 #include "tree-log.h"
+#include "volumes.h"
 #include "compression.h"
 #include "locking.h"
 #include "free-space-cache.h"
@@ -93,6 +93,8 @@
 				   struct page *locked_page,
 				   u64 start, u64 end, int *page_started,
 				   unsigned long *nr_written, int unlock);
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode);
 
 static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
 				     struct inode *inode,  struct inode *dir,
@@ -393,7 +395,10 @@
 	     (BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))) {
 		WARN_ON(pages);
 		pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
-		BUG_ON(!pages);
+		if (!pages) {
+			/* just bail out to the uncompressed code */
+			goto cont;
+		}
 
 		if (BTRFS_I(inode)->force_compress)
 			compress_type = BTRFS_I(inode)->force_compress;
@@ -424,6 +429,7 @@
 			will_compress = 1;
 		}
 	}
+cont:
 	if (start == 0) {
 		trans = btrfs_join_transaction(root);
 		BUG_ON(IS_ERR(trans));
@@ -820,7 +826,7 @@
 	}
 
 	BUG_ON(disk_num_bytes >
-	       btrfs_super_total_bytes(&root->fs_info->super_copy));
+	       btrfs_super_total_bytes(root->fs_info->super_copy));
 
 	alloc_hint = get_extent_allocation_hint(inode, start, num_bytes);
 	btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
@@ -1737,7 +1743,7 @@
 				trans = btrfs_join_transaction(root);
 			BUG_ON(IS_ERR(trans));
 			trans->block_rsv = &root->fs_info->delalloc_block_rsv;
-			ret = btrfs_update_inode(trans, root, inode);
+			ret = btrfs_update_inode_fallback(trans, root, inode);
 			BUG_ON(ret);
 		}
 		goto out;
@@ -1787,17 +1793,17 @@
 
 	ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
 	if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
-		ret = btrfs_update_inode(trans, root, inode);
+		ret = btrfs_update_inode_fallback(trans, root, inode);
 		BUG_ON(ret);
 	}
 	ret = 0;
 out:
-	if (nolock) {
-		if (trans)
-			btrfs_end_transaction_nolock(trans, root);
-	} else {
+	if (root != root->fs_info->tree_root)
 		btrfs_delalloc_release_metadata(inode, ordered_extent->len);
-		if (trans)
+	if (trans) {
+		if (nolock)
+			btrfs_end_transaction_nolock(trans, root);
+		else
 			btrfs_end_transaction(trans, root);
 	}
 
@@ -1819,153 +1825,9 @@
 }
 
 /*
- * When IO fails, either with EIO or csum verification fails, we
- * try other mirrors that might have a good copy of the data.  This
- * io_failure_record is used to record state as we go through all the
- * mirrors.  If another mirror has good data, the page is set up to date
- * and things continue.  If a good mirror can't be found, the original
- * bio end_io callback is called to indicate things have failed.
- */
-struct io_failure_record {
-	struct page *page;
-	u64 start;
-	u64 len;
-	u64 logical;
-	unsigned long bio_flags;
-	int last_mirror;
-};
-
-static int btrfs_io_failed_hook(struct bio *failed_bio,
-			 struct page *page, u64 start, u64 end,
-			 struct extent_state *state)
-{
-	struct io_failure_record *failrec = NULL;
-	u64 private;
-	struct extent_map *em;
-	struct inode *inode = page->mapping->host;
-	struct extent_io_tree *failure_tree = &BTRFS_I(inode)->io_failure_tree;
-	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
-	struct bio *bio;
-	int num_copies;
-	int ret;
-	int rw;
-	u64 logical;
-
-	ret = get_state_private(failure_tree, start, &private);
-	if (ret) {
-		failrec = kmalloc(sizeof(*failrec), GFP_NOFS);
-		if (!failrec)
-			return -ENOMEM;
-		failrec->start = start;
-		failrec->len = end - start + 1;
-		failrec->last_mirror = 0;
-		failrec->bio_flags = 0;
-
-		read_lock(&em_tree->lock);
-		em = lookup_extent_mapping(em_tree, start, failrec->len);
-		if (em->start > start || em->start + em->len < start) {
-			free_extent_map(em);
-			em = NULL;
-		}
-		read_unlock(&em_tree->lock);
-
-		if (IS_ERR_OR_NULL(em)) {
-			kfree(failrec);
-			return -EIO;
-		}
-		logical = start - em->start;
-		logical = em->block_start + logical;
-		if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
-			logical = em->block_start;
-			failrec->bio_flags = EXTENT_BIO_COMPRESSED;
-			extent_set_compress_type(&failrec->bio_flags,
-						 em->compress_type);
-		}
-		failrec->logical = logical;
-		free_extent_map(em);
-		set_extent_bits(failure_tree, start, end, EXTENT_LOCKED |
-				EXTENT_DIRTY, GFP_NOFS);
-		set_state_private(failure_tree, start,
-				 (u64)(unsigned long)failrec);
-	} else {
-		failrec = (struct io_failure_record *)(unsigned long)private;
-	}
-	num_copies = btrfs_num_copies(
-			      &BTRFS_I(inode)->root->fs_info->mapping_tree,
-			      failrec->logical, failrec->len);
-	failrec->last_mirror++;
-	if (!state) {
-		spin_lock(&BTRFS_I(inode)->io_tree.lock);
-		state = find_first_extent_bit_state(&BTRFS_I(inode)->io_tree,
-						    failrec->start,
-						    EXTENT_LOCKED);
-		if (state && state->start != failrec->start)
-			state = NULL;
-		spin_unlock(&BTRFS_I(inode)->io_tree.lock);
-	}
-	if (!state || failrec->last_mirror > num_copies) {
-		set_state_private(failure_tree, failrec->start, 0);
-		clear_extent_bits(failure_tree, failrec->start,
-				  failrec->start + failrec->len - 1,
-				  EXTENT_LOCKED | EXTENT_DIRTY, GFP_NOFS);
-		kfree(failrec);
-		return -EIO;
-	}
-	bio = bio_alloc(GFP_NOFS, 1);
-	bio->bi_private = state;
-	bio->bi_end_io = failed_bio->bi_end_io;
-	bio->bi_sector = failrec->logical >> 9;
-	bio->bi_bdev = failed_bio->bi_bdev;
-	bio->bi_size = 0;
-
-	bio_add_page(bio, page, failrec->len, start - page_offset(page));
-	if (failed_bio->bi_rw & REQ_WRITE)
-		rw = WRITE;
-	else
-		rw = READ;
-
-	ret = BTRFS_I(inode)->io_tree.ops->submit_bio_hook(inode, rw, bio,
-						      failrec->last_mirror,
-						      failrec->bio_flags, 0);
-	return ret;
-}
-
-/*
- * each time an IO finishes, we do a fast check in the IO failure tree
- * to see if we need to process or clean up an io_failure_record
- */
-static int btrfs_clean_io_failures(struct inode *inode, u64 start)
-{
-	u64 private;
-	u64 private_failure;
-	struct io_failure_record *failure;
-	int ret;
-
-	private = 0;
-	if (count_range_bits(&BTRFS_I(inode)->io_failure_tree, &private,
-			     (u64)-1, 1, EXTENT_DIRTY, 0)) {
-		ret = get_state_private(&BTRFS_I(inode)->io_failure_tree,
-					start, &private_failure);
-		if (ret == 0) {
-			failure = (struct io_failure_record *)(unsigned long)
-				   private_failure;
-			set_state_private(&BTRFS_I(inode)->io_failure_tree,
-					  failure->start, 0);
-			clear_extent_bits(&BTRFS_I(inode)->io_failure_tree,
-					  failure->start,
-					  failure->start + failure->len - 1,
-					  EXTENT_DIRTY | EXTENT_LOCKED,
-					  GFP_NOFS);
-			kfree(failure);
-		}
-	}
-	return 0;
-}
-
-/*
  * when reads are done, we need to check csums to verify the data is correct
- * if there's a match, we allow the bio to finish.  If not, we go through
- * the io_failure_record routines to find good copies
+ * if there's a match, we allow the bio to finish.  If not, the code in
+ * extent_io.c will try to find good copies for us.
  */
 static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end,
 			       struct extent_state *state)
@@ -2011,10 +1873,6 @@
 
 	kunmap_atomic(kaddr, KM_USER0);
 good:
-	/* if the io failure tree for this inode is non-empty,
-	 * check to see if we've recovered from a failed IO
-	 */
-	btrfs_clean_io_failures(inode, start);
 	return 0;
 
 zeroit:
@@ -2079,89 +1937,6 @@
 	up_read(&root->fs_info->cleanup_work_sem);
 }
 
-/*
- * calculate extra metadata reservation when snapshotting a subvolume
- * contains orphan files.
- */
-void btrfs_orphan_pre_snapshot(struct btrfs_trans_handle *trans,
-				struct btrfs_pending_snapshot *pending,
-				u64 *bytes_to_reserve)
-{
-	struct btrfs_root *root;
-	struct btrfs_block_rsv *block_rsv;
-	u64 num_bytes;
-	int index;
-
-	root = pending->root;
-	if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
-		return;
-
-	block_rsv = root->orphan_block_rsv;
-
-	/* orphan block reservation for the snapshot */
-	num_bytes = block_rsv->size;
-
-	/*
-	 * after the snapshot is created, COWing tree blocks may use more
-	 * space than it frees. So we should make sure there is enough
-	 * reserved space.
-	 */
-	index = trans->transid & 0x1;
-	if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
-		num_bytes += block_rsv->size -
-			     (block_rsv->reserved + block_rsv->freed[index]);
-	}
-
-	*bytes_to_reserve += num_bytes;
-}
-
-void btrfs_orphan_post_snapshot(struct btrfs_trans_handle *trans,
-				struct btrfs_pending_snapshot *pending)
-{
-	struct btrfs_root *root = pending->root;
-	struct btrfs_root *snap = pending->snap;
-	struct btrfs_block_rsv *block_rsv;
-	u64 num_bytes;
-	int index;
-	int ret;
-
-	if (!root->orphan_block_rsv || list_empty(&root->orphan_list))
-		return;
-
-	/* refill source subvolume's orphan block reservation */
-	block_rsv = root->orphan_block_rsv;
-	index = trans->transid & 0x1;
-	if (block_rsv->reserved + block_rsv->freed[index] < block_rsv->size) {
-		num_bytes = block_rsv->size -
-			    (block_rsv->reserved + block_rsv->freed[index]);
-		ret = btrfs_block_rsv_migrate(&pending->block_rsv,
-					      root->orphan_block_rsv,
-					      num_bytes);
-		BUG_ON(ret);
-	}
-
-	/* setup orphan block reservation for the snapshot */
-	block_rsv = btrfs_alloc_block_rsv(snap);
-	BUG_ON(!block_rsv);
-
-	btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
-	snap->orphan_block_rsv = block_rsv;
-
-	num_bytes = root->orphan_block_rsv->size;
-	ret = btrfs_block_rsv_migrate(&pending->block_rsv,
-				      block_rsv, num_bytes);
-	BUG_ON(ret);
-
-#if 0
-	/* insert orphan item for the snapshot */
-	WARN_ON(!root->orphan_item_inserted);
-	ret = btrfs_insert_orphan_item(trans, root->fs_info->tree_root,
-				       snap->root_key.objectid);
-	BUG_ON(ret);
-	snap->orphan_item_inserted = 1;
-#endif
-}
-
 enum btrfs_orphan_cleanup_state {
 	ORPHAN_CLEANUP_STARTED	= 1,
 	ORPHAN_CLEANUP_DONE	= 2,
@@ -2247,9 +2022,6 @@
 	}
 	spin_unlock(&root->orphan_lock);
 
-	if (block_rsv)
-		btrfs_add_durable_block_rsv(root->fs_info, block_rsv);
-
 	/* grab metadata reservation from transaction handle */
 	if (reserve) {
 		ret = btrfs_orphan_reserve_metadata(trans, inode);
@@ -2316,6 +2088,7 @@
 	struct btrfs_key key, found_key;
 	struct btrfs_trans_handle *trans;
 	struct inode *inode;
+	u64 last_objectid = 0;
 	int ret = 0, nr_unlink = 0, nr_truncate = 0;
 
 	if (cmpxchg(&root->orphan_cleanup_state, 0, ORPHAN_CLEANUP_STARTED))
@@ -2367,13 +2140,39 @@
 		 * crossing root thing.  we store the inode number in the
 		 * offset of the orphan item.
 		 */
+
+		if (found_key.offset == last_objectid) {
+			printk(KERN_ERR "btrfs: Error removing orphan entry, "
+			       "stopping orphan cleanup\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		last_objectid = found_key.offset;
+
 		found_key.objectid = found_key.offset;
 		found_key.type = BTRFS_INODE_ITEM_KEY;
 		found_key.offset = 0;
 		inode = btrfs_iget(root->fs_info->sb, &found_key, root, NULL);
-		if (IS_ERR(inode)) {
-			ret = PTR_ERR(inode);
+		ret = PTR_RET(inode);
+		if (ret && ret != -ESTALE)
 			goto out;
+
+		/*
+		 * Inode is already gone but the orphan item is still there,
+		 * kill the orphan item.
+		 */
+		if (ret == -ESTALE) {
+			trans = btrfs_start_transaction(root, 1);
+			if (IS_ERR(trans)) {
+				ret = PTR_ERR(trans);
+				goto out;
+			}
+			ret = btrfs_del_orphan_item(trans, root,
+						    found_key.objectid);
+			BUG_ON(ret);
+			btrfs_end_transaction(trans, root);
+			continue;
 		}
 
 		/*
@@ -2384,24 +2183,6 @@
 		list_add(&BTRFS_I(inode)->i_orphan, &root->orphan_list);
 		spin_unlock(&root->orphan_lock);
 
-		/*
-		 * if this is a bad inode, means we actually succeeded in
-		 * removing the inode, but not the orphan record, which means
-		 * we need to manually delete the orphan since iput will just
-		 * do a destroy_inode
-		 */
-		if (is_bad_inode(inode)) {
-			trans = btrfs_start_transaction(root, 0);
-			if (IS_ERR(trans)) {
-				ret = PTR_ERR(trans);
-				goto out;
-			}
-			btrfs_orphan_del(trans, inode);
-			btrfs_end_transaction(trans, root);
-			iput(inode);
-			continue;
-		}
-
 		/* if we have links, this was a truncate, lets do that */
 		if (inode->i_nlink) {
 			if (!S_ISREG(inode->i_mode)) {
@@ -2420,6 +2201,9 @@
 		if (ret)
 			goto out;
 	}
+	/* release the path since we're done with it */
+	btrfs_release_path(path);
+
 	root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE;
 
 	if (root->orphan_block_rsv)
@@ -2647,7 +2431,7 @@
 /*
  * copy everything in the in-memory inode into the btree.
  */
-noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root, struct inode *inode)
 {
 	struct btrfs_inode_item *inode_item;
@@ -2655,21 +2439,6 @@
 	struct extent_buffer *leaf;
 	int ret;
 
-	/*
-	 * If the inode is a free space inode, we can deadlock during commit
-	 * if we put it into the delayed code.
-	 *
-	 * The data relocation inode should also be directly updated
-	 * without delay
-	 */
-	if (!btrfs_is_free_space_inode(root, inode)
-	    && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
-		ret = btrfs_delayed_update_inode(trans, root, inode);
-		if (!ret)
-			btrfs_set_inode_last_trans(trans, inode);
-		return ret;
-	}
-
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
@@ -2698,6 +2467,43 @@
 }
 
 /*
+ * copy everything in the in-memory inode into the btree.
+ */
+noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode)
+{
+	int ret;
+
+	/*
+	 * If the inode is a free space inode, we can deadlock during commit
+	 * if we put it into the delayed code.
+	 *
+	 * The data relocation inode should also be directly updated
+	 * without delay
+	 */
+	if (!btrfs_is_free_space_inode(root, inode)
+	    && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
+		ret = btrfs_delayed_update_inode(trans, root, inode);
+		if (!ret)
+			btrfs_set_inode_last_trans(trans, inode);
+		return ret;
+	}
+
+	return btrfs_update_inode_item(trans, root, inode);
+}
+
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode)
+{
+	int ret;
+
+	ret = btrfs_update_inode(trans, root, inode);
+	if (ret == -ENOSPC)
+		return btrfs_update_inode_item(trans, root, inode);
+	return ret;
+}
+
+/*
  * unlink helper that gets used here in inode.c and in the tree logging
  * recovery code.  It remove a link in a directory with a given name, and
  * also drops the back refs in the inode to the directory
@@ -2835,7 +2641,16 @@
 	u64 ino = btrfs_ino(inode);
 	u64 dir_ino = btrfs_ino(dir);
 
-	trans = btrfs_start_transaction(root, 10);
+	/*
+	 * 1 for the possible orphan item
+	 * 1 for the dir item
+	 * 1 for the dir index
+	 * 1 for the inode ref
+	 * 1 for the inode ref in the tree log
+	 * 2 for the dir entries in the log
+	 * 1 for the inode
+	 */
+	trans = btrfs_start_transaction(root, 8);
 	if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
 		return trans;
 
@@ -2858,7 +2673,8 @@
 		return ERR_PTR(-ENOMEM);
 	}
 
-	trans = btrfs_start_transaction(root, 0);
+	/* 1 for the orphan item */
+	trans = btrfs_start_transaction(root, 1);
 	if (IS_ERR(trans)) {
 		btrfs_free_path(path);
 		root->fs_info->enospc_unlink = 0;
@@ -2963,6 +2779,12 @@
 	err = 0;
 out:
 	btrfs_free_path(path);
+	/* Migrate the orphan reservation over */
+	if (!err)
+		err = btrfs_block_rsv_migrate(trans->block_rsv,
+				&root->fs_info->global_block_rsv,
+				trans->bytes_reserved);
+
 	if (err) {
 		btrfs_end_transaction(trans, root);
 		root->fs_info->enospc_unlink = 0;
@@ -2977,6 +2799,9 @@
 			       struct btrfs_root *root)
 {
 	if (trans->block_rsv == &root->fs_info->global_block_rsv) {
+		btrfs_block_rsv_release(root, trans->block_rsv,
+					trans->bytes_reserved);
+		trans->block_rsv = &root->fs_info->trans_block_rsv;
 		BUG_ON(!root->fs_info->enospc_unlink);
 		root->fs_info->enospc_unlink = 0;
 	}
@@ -3368,6 +3193,7 @@
 	pgoff_t index = from >> PAGE_CACHE_SHIFT;
 	unsigned offset = from & (PAGE_CACHE_SIZE-1);
 	struct page *page;
+	gfp_t mask = btrfs_alloc_write_mask(mapping);
 	int ret = 0;
 	u64 page_start;
 	u64 page_end;
@@ -3380,7 +3206,7 @@
 
 	ret = -ENOMEM;
 again:
-	page = find_or_create_page(mapping, index, GFP_NOFS);
+	page = find_or_create_page(mapping, index, mask);
 	if (!page) {
 		btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE);
 		goto out;
@@ -3613,6 +3439,8 @@
 {
 	struct btrfs_trans_handle *trans;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_block_rsv *rsv, *global_rsv;
+	u64 min_size = btrfs_calc_trunc_metadata_size(root, 1);
 	unsigned long nr;
 	int ret;
 
@@ -3640,22 +3468,55 @@
 		goto no_delete;
 	}
 
+	rsv = btrfs_alloc_block_rsv(root);
+	if (!rsv) {
+		btrfs_orphan_del(NULL, inode);
+		goto no_delete;
+	}
+	rsv->size = min_size;
+	global_rsv = &root->fs_info->global_block_rsv;
+
 	btrfs_i_size_write(inode, 0);
 
+	/*
+	 * This is a bit simpler than btrfs_truncate since
+	 *
+	 * 1) We've already reserved our space for our orphan item in the
+	 *    unlink.
+	 * 2) We're going to delete the inode item, so we don't need to update
+	 *    it at all.
+	 *
+	 * So we just need to reserve some slack space in case we add bytes when
+	 * doing the truncate.
+	 */
 	while (1) {
-		trans = btrfs_join_transaction(root);
-		BUG_ON(IS_ERR(trans));
-		trans->block_rsv = root->orphan_block_rsv;
+		ret = btrfs_block_rsv_refill_noflush(root, rsv, min_size);
 
-		ret = btrfs_block_rsv_check(trans, root,
-					    root->orphan_block_rsv, 0, 5);
+		/*
+		 * Try and steal from the global reserve since we will
+		 * likely not use this space anyway, we want to try as
+		 * hard as possible to get this to work.
+		 */
+		if (ret)
+			ret = btrfs_block_rsv_migrate(global_rsv, rsv, min_size);
+
 		if (ret) {
-			BUG_ON(ret != -EAGAIN);
-			ret = btrfs_commit_transaction(trans, root);
-			BUG_ON(ret);
-			continue;
+			printk(KERN_WARNING "Could not get space for a "
+			       "delete, will truncate on mount %d\n", ret);
+			btrfs_orphan_del(NULL, inode);
+			btrfs_free_block_rsv(root, rsv);
+			goto no_delete;
 		}
 
+		trans = btrfs_start_transaction(root, 0);
+		if (IS_ERR(trans)) {
+			btrfs_orphan_del(NULL, inode);
+			btrfs_free_block_rsv(root, rsv);
+			goto no_delete;
+		}
+
+		trans->block_rsv = rsv;
+
 		ret = btrfs_truncate_inode_items(trans, root, inode, 0, 0);
 		if (ret != -EAGAIN)
 			break;
@@ -3664,14 +3525,17 @@
 		btrfs_end_transaction(trans, root);
 		trans = NULL;
 		btrfs_btree_balance_dirty(root, nr);
-
 	}
 
+	btrfs_free_block_rsv(root, rsv);
+
 	if (ret == 0) {
+		trans->block_rsv = root->orphan_block_rsv;
 		ret = btrfs_orphan_del(trans, inode);
 		BUG_ON(ret);
 	}
 
+	trans->block_rsv = &root->fs_info->trans_block_rsv;
 	if (!(root == root->fs_info->tree_root ||
 	      root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID))
 		btrfs_return_ino(root, btrfs_ino(inode));
@@ -5795,8 +5659,7 @@
 	if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) {
 		ret = btrfs_ordered_update_i_size(inode, 0, ordered);
 		if (!ret)
-			ret = btrfs_update_inode(trans, root, inode);
-		err = ret;
+			err = btrfs_update_inode_fallback(trans, root, inode);
 		goto out;
 	}
 
@@ -5834,7 +5697,7 @@
 	add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
 	ret = btrfs_ordered_update_i_size(inode, 0, ordered);
 	if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags))
-		btrfs_update_inode(trans, root, inode);
+		btrfs_update_inode_fallback(trans, root, inode);
 	ret = 0;
 out_unlock:
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
@@ -6289,7 +6152,7 @@
 {
 	struct extent_io_tree *tree;
 	tree = &BTRFS_I(page->mapping->host)->io_tree;
-	return extent_read_full_page(tree, page, btrfs_get_extent);
+	return extent_read_full_page(tree, page, btrfs_get_extent, 0);
 }
 
 static int btrfs_writepage(struct page *page, struct writeback_control *wbc)
@@ -6541,6 +6404,7 @@
 	struct btrfs_trans_handle *trans;
 	unsigned long nr;
 	u64 mask = root->sectorsize - 1;
+	u64 min_size = btrfs_calc_trunc_metadata_size(root, 1);
 
 	ret = btrfs_truncate_page(inode->i_mapping, inode->i_size);
 	if (ret)
@@ -6588,19 +6452,23 @@
 	rsv = btrfs_alloc_block_rsv(root);
 	if (!rsv)
 		return -ENOMEM;
-	btrfs_add_durable_block_rsv(root->fs_info, rsv);
+	rsv->size = min_size;
 
+	/*
+	 * 1 for the truncate slack space
+	 * 1 for the orphan item we're going to add
+	 * 1 for the orphan item deletion
+	 * 1 for updating the inode.
+	 */
 	trans = btrfs_start_transaction(root, 4);
 	if (IS_ERR(trans)) {
 		err = PTR_ERR(trans);
 		goto out;
 	}
 
-	/*
-	 * Reserve space for the truncate process.  Truncate should be adding
-	 * space, but if there are snapshots it may end up using space.
-	 */
-	ret = btrfs_truncate_reserve_metadata(trans, root, rsv);
+	/* Migrate the slack space for the truncate to our reserve */
+	ret = btrfs_block_rsv_migrate(&root->fs_info->trans_block_rsv, rsv,
+				      min_size);
 	BUG_ON(ret);
 
 	ret = btrfs_orphan_add(trans, inode);
@@ -6609,21 +6477,6 @@
 		goto out;
 	}
 
-	nr = trans->blocks_used;
-	btrfs_end_transaction(trans, root);
-	btrfs_btree_balance_dirty(root, nr);
-
-	/*
-	 * Ok so we've already migrated our bytes over for the truncate, so here
-	 * just reserve the one slot we need for updating the inode.
-	 */
-	trans = btrfs_start_transaction(root, 1);
-	if (IS_ERR(trans)) {
-		err = PTR_ERR(trans);
-		goto out;
-	}
-	trans->block_rsv = rsv;
-
 	/*
 	 * setattr is responsible for setting the ordered_data_close flag,
 	 * but that is only tested during the last file release.  That
@@ -6645,20 +6498,30 @@
 		btrfs_add_ordered_operation(trans, root, inode);
 
 	while (1) {
+		ret = btrfs_block_rsv_refill(root, rsv, min_size);
+		if (ret) {
+			/*
+			 * This can only happen with the original transaction we
+			 * started above, every other time we shouldn't have a
+			 * transaction started yet.
+			 */
+			if (ret == -EAGAIN)
+				goto end_trans;
+			err = ret;
+			break;
+		}
+
 		if (!trans) {
-			trans = btrfs_start_transaction(root, 3);
+			/* Just need the 1 for updating the inode */
+			trans = btrfs_start_transaction(root, 1);
 			if (IS_ERR(trans)) {
 				err = PTR_ERR(trans);
 				goto out;
 			}
-
-			ret = btrfs_truncate_reserve_metadata(trans, root,
-							      rsv);
-			BUG_ON(ret);
-
-			trans->block_rsv = rsv;
 		}
 
+		trans->block_rsv = rsv;
+
 		ret = btrfs_truncate_inode_items(trans, root, inode,
 						 inode->i_size,
 						 BTRFS_EXTENT_DATA_KEY);
@@ -6673,7 +6536,7 @@
 			err = ret;
 			break;
 		}
-
+end_trans:
 		nr = trans->blocks_used;
 		btrfs_end_transaction(trans, root);
 		trans = NULL;
@@ -6693,14 +6556,16 @@
 		ret = btrfs_orphan_del(NULL, inode);
 	}
 
-	trans->block_rsv = &root->fs_info->trans_block_rsv;
-	ret = btrfs_update_inode(trans, root, inode);
-	if (ret && !err)
-		err = ret;
+	if (trans) {
+		trans->block_rsv = &root->fs_info->trans_block_rsv;
+		ret = btrfs_update_inode(trans, root, inode);
+		if (ret && !err)
+			err = ret;
 
-	nr = trans->blocks_used;
-	ret = btrfs_end_transaction_throttle(trans, root);
-	btrfs_btree_balance_dirty(root, nr);
+		nr = trans->blocks_used;
+		ret = btrfs_end_transaction_throttle(trans, root);
+		btrfs_btree_balance_dirty(root, nr);
+	}
 
 out:
 	btrfs_free_block_rsv(root, rsv);
@@ -6755,9 +6620,9 @@
 	ei->last_sub_trans = 0;
 	ei->logged_trans = 0;
 	ei->delalloc_bytes = 0;
-	ei->reserved_bytes = 0;
 	ei->disk_i_size = 0;
 	ei->flags = 0;
+	ei->csum_bytes = 0;
 	ei->index_cnt = (u64)-1;
 	ei->last_unlink_trans = 0;
 
@@ -6769,6 +6634,7 @@
 	ei->orphan_meta_reserved = 0;
 	ei->dummy_inode = 0;
 	ei->in_defrag = 0;
+	ei->delalloc_meta_reserved = 0;
 	ei->force_compress = BTRFS_COMPRESS_NONE;
 
 	ei->delayed_node = NULL;
@@ -6803,6 +6669,8 @@
 	WARN_ON(inode->i_data.nrpages);
 	WARN_ON(BTRFS_I(inode)->outstanding_extents);
 	WARN_ON(BTRFS_I(inode)->reserved_extents);
+	WARN_ON(BTRFS_I(inode)->delalloc_bytes);
+	WARN_ON(BTRFS_I(inode)->csum_bytes);
 
 	/*
 	 * This can happen where we create an inode, but somebody else also
@@ -6926,11 +6794,13 @@
 			 struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
+	u32 blocksize = inode->i_sb->s_blocksize;
+
 	generic_fillattr(inode, stat);
 	stat->dev = BTRFS_I(inode)->root->anon_dev;
 	stat->blksize = PAGE_CACHE_SIZE;
-	stat->blocks = (inode_get_bytes(inode) +
-			BTRFS_I(inode)->delalloc_bytes) >> 9;
+	stat->blocks = (ALIGN(inode_get_bytes(inode), blocksize) +
+		ALIGN(BTRFS_I(inode)->delalloc_bytes, blocksize)) >> 9;
 	return 0;
 }
 
@@ -7420,7 +7290,6 @@
 	.readpage_end_io_hook = btrfs_readpage_end_io_hook,
 	.writepage_end_io_hook = btrfs_writepage_end_io_hook,
 	.writepage_start_hook = btrfs_writepage_start_hook,
-	.readpage_io_failed_hook = btrfs_io_failed_hook,
 	.set_bit_hook = btrfs_set_bit_hook,
 	.clear_bit_hook = btrfs_clear_bit_hook,
 	.merge_extent_hook = btrfs_merge_extent_hook,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index dae5dfe..72d4616 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -51,6 +51,7 @@
 #include "volumes.h"
 #include "locking.h"
 #include "inode-map.h"
+#include "backref.h"
 
 /* Mask out flags that are inappropriate for the given type of inode. */
 static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
@@ -117,7 +118,7 @@
 /*
  * Inherit flags from the parent inode.
  *
- * Unlike extN we don't have any flags we don't want to inherit currently.
+ * Currently only the compression flags and the cow flags are inherited.
  */
 void btrfs_inherit_iflags(struct inode *inode, struct inode *dir)
 {
@@ -128,12 +129,17 @@
 
 	flags = BTRFS_I(dir)->flags;
 
-	if (S_ISREG(inode->i_mode))
-		flags &= ~BTRFS_INODE_DIRSYNC;
-	else if (!S_ISDIR(inode->i_mode))
-		flags &= (BTRFS_INODE_NODUMP | BTRFS_INODE_NOATIME);
+	if (flags & BTRFS_INODE_NOCOMPRESS) {
+		BTRFS_I(inode)->flags &= ~BTRFS_INODE_COMPRESS;
+		BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+	} else if (flags & BTRFS_INODE_COMPRESS) {
+		BTRFS_I(inode)->flags &= ~BTRFS_INODE_NOCOMPRESS;
+		BTRFS_I(inode)->flags |= BTRFS_INODE_COMPRESS;
+	}
 
-	BTRFS_I(inode)->flags = flags;
+	if (flags & BTRFS_INODE_NODATACOW)
+		BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
+
 	btrfs_update_iflags(inode);
 }
 
@@ -277,6 +283,7 @@
 	struct fstrim_range range;
 	u64 minlen = ULLONG_MAX;
 	u64 num_devices = 0;
+	u64 total_bytes = btrfs_super_total_bytes(root->fs_info->super_copy);
 	int ret;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -295,12 +302,15 @@
 		}
 	}
 	rcu_read_unlock();
+
 	if (!num_devices)
 		return -EOPNOTSUPP;
-
 	if (copy_from_user(&range, arg, sizeof(range)))
 		return -EFAULT;
+	if (range.start > total_bytes)
+		return -EINVAL;
 
+	range.len = min(range.len, total_bytes - range.start);
 	range.minlen = max(range.minlen, minlen);
 	ret = btrfs_trim_fs(root, &range);
 	if (ret < 0)
@@ -760,7 +770,7 @@
 	int ret = 1;
 
 	/*
-	 * make sure that once we start defragging and extent, we keep on
+	 * make sure that once we start defragging an extent, we keep on
 	 * defragging it
 	 */
 	if (start < *defrag_end)
@@ -805,7 +815,6 @@
 	 * extent will force at least part of that big extent to be defragged.
 	 */
 	if (ret) {
-		*last_len += len;
 		*defrag_end = extent_map_end(em);
 	} else {
 		*last_len = 0;
@@ -843,6 +852,7 @@
 	int i_done;
 	struct btrfs_ordered_extent *ordered;
 	struct extent_state *cached_state = NULL;
+	gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
 
 	if (isize == 0)
 		return 0;
@@ -860,7 +870,7 @@
 	for (i = 0; i < num_pages; i++) {
 		struct page *page;
 		page = find_or_create_page(inode->i_mapping,
-					    start_index + i, GFP_NOFS);
+					    start_index + i, mask);
 		if (!page)
 			break;
 
@@ -972,18 +982,20 @@
 	struct btrfs_super_block *disk_super;
 	struct file_ra_state *ra = NULL;
 	unsigned long last_index;
+	u64 isize = i_size_read(inode);
 	u64 features;
 	u64 last_len = 0;
 	u64 skip = 0;
 	u64 defrag_end = 0;
 	u64 newer_off = range->start;
-	int newer_left = 0;
 	unsigned long i;
+	unsigned long ra_index = 0;
 	int ret;
 	int defrag_count = 0;
 	int compress_type = BTRFS_COMPRESS_ZLIB;
 	int extent_thresh = range->extent_thresh;
-	int newer_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT;
+	int max_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT;
+	int cluster = max_cluster;
 	u64 new_align = ~((u64)128 * 1024 - 1);
 	struct page **pages = NULL;
 
@@ -997,7 +1009,7 @@
 			compress_type = range->compress_type;
 	}
 
-	if (inode->i_size == 0)
+	if (isize == 0)
 		return 0;
 
 	/*
@@ -1013,7 +1025,7 @@
 		ra = &file->f_ra;
 	}
 
-	pages = kmalloc(sizeof(struct page *) * newer_cluster,
+	pages = kmalloc(sizeof(struct page *) * max_cluster,
 			GFP_NOFS);
 	if (!pages) {
 		ret = -ENOMEM;
@@ -1022,10 +1034,10 @@
 
 	/* find the last page to defrag */
 	if (range->start + range->len > range->start) {
-		last_index = min_t(u64, inode->i_size - 1,
+		last_index = min_t(u64, isize - 1,
 			 range->start + range->len - 1) >> PAGE_CACHE_SHIFT;
 	} else {
-		last_index = (inode->i_size - 1) >> PAGE_CACHE_SHIFT;
+		last_index = (isize - 1) >> PAGE_CACHE_SHIFT;
 	}
 
 	if (newer_than) {
@@ -1038,14 +1050,13 @@
 			 * the extents in the file evenly spaced
 			 */
 			i = (newer_off & new_align) >> PAGE_CACHE_SHIFT;
-			newer_left = newer_cluster;
 		} else
 			goto out_ra;
 	} else {
 		i = range->start >> PAGE_CACHE_SHIFT;
 	}
 	if (!max_to_defrag)
-		max_to_defrag = last_index - 1;
+		max_to_defrag = last_index;
 
 	/*
 	 * make writeback starts from i, so the defrag range can be
@@ -1079,18 +1090,31 @@
 			i = max(i + 1, next);
 			continue;
 		}
+
+		if (!newer_than) {
+			cluster = (PAGE_CACHE_ALIGN(defrag_end) >>
+				   PAGE_CACHE_SHIFT) - i;
+			cluster = min(cluster, max_cluster);
+		} else {
+			cluster = max_cluster;
+		}
+
 		if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
 			BTRFS_I(inode)->force_compress = compress_type;
 
-		btrfs_force_ra(inode->i_mapping, ra, file, i, newer_cluster);
+		if (i + cluster > ra_index) {
+			ra_index = max(i, ra_index);
+			btrfs_force_ra(inode->i_mapping, ra, file, ra_index,
+				       cluster);
+			ra_index += max_cluster;
+		}
 
-		ret = cluster_pages_for_defrag(inode, pages, i, newer_cluster);
+		ret = cluster_pages_for_defrag(inode, pages, i, cluster);
 		if (ret < 0)
 			goto out_ra;
 
 		defrag_count += ret;
 		balance_dirty_pages_ratelimited_nr(inode->i_mapping, ret);
-		i += ret;
 
 		if (newer_than) {
 			if (newer_off == (u64)-1)
@@ -1105,12 +1129,17 @@
 			if (!ret) {
 				range->start = newer_off;
 				i = (newer_off & new_align) >> PAGE_CACHE_SHIFT;
-				newer_left = newer_cluster;
 			} else {
 				break;
 			}
 		} else {
-			i++;
+			if (ret > 0) {
+				i += ret;
+				last_len += ret << PAGE_CACHE_SHIFT;
+			} else {
+				i++;
+				last_len = 0;
+			}
 		}
 	}
 
@@ -1136,16 +1165,14 @@
 		mutex_unlock(&inode->i_mutex);
 	}
 
-	disk_super = &root->fs_info->super_copy;
+	disk_super = root->fs_info->super_copy;
 	features = btrfs_super_incompat_flags(disk_super);
 	if (range->compress_type == BTRFS_COMPRESS_LZO) {
 		features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
 		btrfs_set_super_incompat_flags(disk_super, features);
 	}
 
-	if (!file)
-		kfree(ra);
-	return defrag_count;
+	ret = defrag_count;
 
 out_ra:
 	if (!file)
@@ -1189,12 +1216,12 @@
 		*devstr = '\0';
 		devstr = vol_args->name;
 		devid = simple_strtoull(devstr, &end, 10);
-		printk(KERN_INFO "resizing devid %llu\n",
+		printk(KERN_INFO "btrfs: resizing devid %llu\n",
 		       (unsigned long long)devid);
 	}
 	device = btrfs_find_device(root, devid, NULL, NULL);
 	if (!device) {
-		printk(KERN_INFO "resizer unable to find device %llu\n",
+		printk(KERN_INFO "btrfs: resizer unable to find device %llu\n",
 		       (unsigned long long)devid);
 		ret = -EINVAL;
 		goto out_unlock;
@@ -1240,7 +1267,7 @@
 	do_div(new_size, root->sectorsize);
 	new_size *= root->sectorsize;
 
-	printk(KERN_INFO "new size for %s is %llu\n",
+	printk(KERN_INFO "btrfs: new size for %s is %llu\n",
 		device->name, (unsigned long long)new_size);
 
 	if (new_size > old_size) {
@@ -1251,7 +1278,7 @@
 		}
 		ret = btrfs_grow_device(trans, device, new_size);
 		btrfs_commit_transaction(trans, root);
-	} else {
+	} else if (new_size < old_size) {
 		ret = btrfs_shrink_device(device, new_size);
 	}
 
@@ -2587,7 +2614,7 @@
 		return PTR_ERR(trans);
 	}
 
-	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+	dir_id = btrfs_super_root_dir(root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
 				   dir_id, "default", 7, 1);
 	if (IS_ERR_OR_NULL(di)) {
@@ -2603,7 +2630,7 @@
 	btrfs_mark_buffer_dirty(path->nodes[0]);
 	btrfs_free_path(path);
 
-	disk_super = &root->fs_info->super_copy;
+	disk_super = root->fs_info->super_copy;
 	features = btrfs_super_incompat_flags(disk_super);
 	if (!(features & BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL)) {
 		features |= BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL;
@@ -2864,6 +2891,147 @@
 	return ret;
 }
 
+static long btrfs_ioctl_ino_to_path(struct btrfs_root *root, void __user *arg)
+{
+	int ret = 0;
+	int i;
+	u64 rel_ptr;
+	int size;
+	struct btrfs_ioctl_ino_path_args *ipa = NULL;
+	struct inode_fs_paths *ipath = NULL;
+	struct btrfs_path *path;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	path = btrfs_alloc_path();
+	if (!path) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ipa = memdup_user(arg, sizeof(*ipa));
+	if (IS_ERR(ipa)) {
+		ret = PTR_ERR(ipa);
+		ipa = NULL;
+		goto out;
+	}
+
+	size = min_t(u32, ipa->size, 4096);
+	ipath = init_ipath(size, root, path);
+	if (IS_ERR(ipath)) {
+		ret = PTR_ERR(ipath);
+		ipath = NULL;
+		goto out;
+	}
+
+	ret = paths_from_inode(ipa->inum, ipath);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < ipath->fspath->elem_cnt; ++i) {
+		rel_ptr = ipath->fspath->val[i] -
+			  (u64)(unsigned long)ipath->fspath->val;
+		ipath->fspath->val[i] = rel_ptr;
+	}
+
+	ret = copy_to_user((void *)(unsigned long)ipa->fspath,
+			   (void *)(unsigned long)ipath->fspath, size);
+	if (ret) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+out:
+	btrfs_free_path(path);
+	free_ipath(ipath);
+	kfree(ipa);
+
+	return ret;
+}
+
+static int build_ino_list(u64 inum, u64 offset, u64 root, void *ctx)
+{
+	struct btrfs_data_container *inodes = ctx;
+	const size_t c = 3 * sizeof(u64);
+
+	if (inodes->bytes_left >= c) {
+		inodes->bytes_left -= c;
+		inodes->val[inodes->elem_cnt] = inum;
+		inodes->val[inodes->elem_cnt + 1] = offset;
+		inodes->val[inodes->elem_cnt + 2] = root;
+		inodes->elem_cnt += 3;
+	} else {
+		inodes->bytes_missing += c - inodes->bytes_left;
+		inodes->bytes_left = 0;
+		inodes->elem_missed += 3;
+	}
+
+	return 0;
+}
+
+static long btrfs_ioctl_logical_to_ino(struct btrfs_root *root,
+					void __user *arg)
+{
+	int ret = 0;
+	int size;
+	u64 extent_offset;
+	struct btrfs_ioctl_logical_ino_args *loi;
+	struct btrfs_data_container *inodes = NULL;
+	struct btrfs_path *path = NULL;
+	struct btrfs_key key;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	loi = memdup_user(arg, sizeof(*loi));
+	if (IS_ERR(loi)) {
+		ret = PTR_ERR(loi);
+		loi = NULL;
+		goto out;
+	}
+
+	path = btrfs_alloc_path();
+	if (!path) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	size = min_t(u32, loi->size, 4096);
+	inodes = init_data_container(size);
+	if (IS_ERR(inodes)) {
+		ret = PTR_ERR(inodes);
+		inodes = NULL;
+		goto out;
+	}
+
+	ret = extent_from_logical(root->fs_info, loi->logical, path, &key);
+
+	if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK)
+		ret = -ENOENT;
+	if (ret < 0)
+		goto out;
+
+	extent_offset = loi->logical - key.objectid;
+	ret = iterate_extent_inodes(root->fs_info, path, key.objectid,
+					extent_offset, build_ino_list, inodes);
+
+	if (ret < 0)
+		goto out;
+
+	ret = copy_to_user((void *)(unsigned long)loi->inodes,
+			   (void *)(unsigned long)inodes, size);
+	if (ret)
+		ret = -EFAULT;
+
+out:
+	btrfs_free_path(path);
+	kfree(inodes);
+	kfree(loi);
+
+	return ret;
+}
+
 long btrfs_ioctl(struct file *file, unsigned int
 		cmd, unsigned long arg)
 {
@@ -2921,6 +3089,10 @@
 		return btrfs_ioctl_tree_search(file, argp);
 	case BTRFS_IOC_INO_LOOKUP:
 		return btrfs_ioctl_ino_lookup(file, argp);
+	case BTRFS_IOC_INO_PATHS:
+		return btrfs_ioctl_ino_to_path(root, argp);
+	case BTRFS_IOC_LOGICAL_INO:
+		return btrfs_ioctl_logical_to_ino(root, argp);
 	case BTRFS_IOC_SPACE_INFO:
 		return btrfs_ioctl_space_info(root, argp);
 	case BTRFS_IOC_SYNC:
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index ad1ea78..252ae99 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -193,6 +193,30 @@
 	struct btrfs_ioctl_space_info spaces[0];
 };
 
+struct btrfs_data_container {
+	__u32	bytes_left;	/* out -- bytes not needed to deliver output */
+	__u32	bytes_missing;	/* out -- additional bytes needed for result */
+	__u32	elem_cnt;	/* out */
+	__u32	elem_missed;	/* out */
+	__u64	val[0];		/* out */
+};
+
+struct btrfs_ioctl_ino_path_args {
+	__u64				inum;		/* in */
+	__u32				size;		/* in */
+	__u64				reserved[4];
+	/* struct btrfs_data_container	*fspath;	   out */
+	__u64				fspath;		/* out */
+};
+
+struct btrfs_ioctl_logical_ino_args {
+	__u64				logical;	/* in */
+	__u32				size;		/* in */
+	__u64				reserved[4];
+	/* struct btrfs_data_container	*inodes;	out   */
+	__u64				inodes;
+};
+
 #define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \
 				   struct btrfs_ioctl_vol_args)
 #define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \
@@ -248,4 +272,9 @@
 				 struct btrfs_ioctl_dev_info_args)
 #define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \
 			       struct btrfs_ioctl_fs_info_args)
+#define BTRFS_IOC_INO_PATHS _IOWR(BTRFS_IOCTL_MAGIC, 35, \
+					struct btrfs_ioctl_ino_path_args)
+#define BTRFS_IOC_LOGICAL_INO _IOWR(BTRFS_IOCTL_MAGIC, 36, \
+					struct btrfs_ioctl_ino_path_args)
+
 #endif
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index fb2605d..f38e452 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -158,8 +158,7 @@
 void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l)
 {
 	int i;
-	u32 type;
-	u32 nr = btrfs_header_nritems(l);
+	u32 type, nr;
 	struct btrfs_item *item;
 	struct btrfs_root_item *ri;
 	struct btrfs_dir_item *di;
@@ -172,6 +171,11 @@
 	struct btrfs_key key;
 	struct btrfs_key found_key;
 
+	if (!l)
+		return;
+
+	nr = btrfs_header_nritems(l);
+
 	printk(KERN_INFO "leaf %llu total ptrs %d free space %d\n",
 		(unsigned long long)btrfs_header_bytenr(l), nr,
 		btrfs_leaf_free_space(root, l));
diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c
new file mode 100644
index 0000000..2373b39
--- /dev/null
+++ b/fs/btrfs/reada.c
@@ -0,0 +1,951 @@
+/*
+ * Copyright (C) 2011 STRATO.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/writeback.h>
+#include <linux/blkdev.h>
+#include <linux/rbtree.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include "ctree.h"
+#include "volumes.h"
+#include "disk-io.h"
+#include "transaction.h"
+
+#undef DEBUG
+
+/*
+ * This is the implementation for the generic read ahead framework.
+ *
+ * To trigger a readahead, btrfs_reada_add must be called. It will start
+ * a read ahead for the given range [start, end) on tree root. The returned
+ * handle can either be used to wait on the readahead to finish
+ * (btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
+ *
+ * The read ahead works as follows:
+ * On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
+ * reada_start_machine will then search for extents to prefetch and trigger
+ * some reads. When a read finishes for a node, all contained node/leaf
+ * pointers that lie in the given range will also be enqueued. The reads will
+ * be triggered in sequential order, thus giving a big win over a naive
+ * enumeration. It will also make use of multi-device layouts. Each disk
+ * will have its on read pointer and all disks will by utilized in parallel.
+ * Also will no two disks read both sides of a mirror simultaneously, as this
+ * would waste seeking capacity. Instead both disks will read different parts
+ * of the filesystem.
+ * Any number of readaheads can be started in parallel. The read order will be
+ * determined globally, i.e. 2 parallel readaheads will normally finish faster
+ * than the 2 started one after another.
+ */
+
+#define MAX_MIRRORS 2
+#define MAX_IN_FLIGHT 6
+
+struct reada_extctl {
+	struct list_head	list;
+	struct reada_control	*rc;
+	u64			generation;
+};
+
+struct reada_extent {
+	u64			logical;
+	struct btrfs_key	top;
+	u32			blocksize;
+	int			err;
+	struct list_head	extctl;
+	struct kref		refcnt;
+	spinlock_t		lock;
+	struct reada_zone	*zones[MAX_MIRRORS];
+	int			nzones;
+	struct btrfs_device	*scheduled_for;
+};
+
+struct reada_zone {
+	u64			start;
+	u64			end;
+	u64			elems;
+	struct list_head	list;
+	spinlock_t		lock;
+	int			locked;
+	struct btrfs_device	*device;
+	struct btrfs_device	*devs[MAX_MIRRORS]; /* full list, incl self */
+	int			ndevs;
+	struct kref		refcnt;
+};
+
+struct reada_machine_work {
+	struct btrfs_work	work;
+	struct btrfs_fs_info	*fs_info;
+};
+
+static void reada_extent_put(struct btrfs_fs_info *, struct reada_extent *);
+static void reada_control_release(struct kref *kref);
+static void reada_zone_release(struct kref *kref);
+static void reada_start_machine(struct btrfs_fs_info *fs_info);
+static void __reada_start_machine(struct btrfs_fs_info *fs_info);
+
+static int reada_add_block(struct reada_control *rc, u64 logical,
+			   struct btrfs_key *top, int level, u64 generation);
+
+/* recurses */
+/* in case of err, eb might be NULL */
+static int __readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+			    u64 start, int err)
+{
+	int level = 0;
+	int nritems;
+	int i;
+	u64 bytenr;
+	u64 generation;
+	struct reada_extent *re;
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	struct list_head list;
+	unsigned long index = start >> PAGE_CACHE_SHIFT;
+	struct btrfs_device *for_dev;
+
+	if (eb)
+		level = btrfs_header_level(eb);
+
+	/* find extent */
+	spin_lock(&fs_info->reada_lock);
+	re = radix_tree_lookup(&fs_info->reada_tree, index);
+	if (re)
+		kref_get(&re->refcnt);
+	spin_unlock(&fs_info->reada_lock);
+
+	if (!re)
+		return -1;
+
+	spin_lock(&re->lock);
+	/*
+	 * just take the full list from the extent. afterwards we
+	 * don't need the lock anymore
+	 */
+	list_replace_init(&re->extctl, &list);
+	for_dev = re->scheduled_for;
+	re->scheduled_for = NULL;
+	spin_unlock(&re->lock);
+
+	if (err == 0) {
+		nritems = level ? btrfs_header_nritems(eb) : 0;
+		generation = btrfs_header_generation(eb);
+		/*
+		 * FIXME: currently we just set nritems to 0 if this is a leaf,
+		 * effectively ignoring the content. In a next step we could
+		 * trigger more readahead depending from the content, e.g.
+		 * fetch the checksums for the extents in the leaf.
+		 */
+	} else {
+		/*
+		 * this is the error case, the extent buffer has not been
+		 * read correctly. We won't access anything from it and
+		 * just cleanup our data structures. Effectively this will
+		 * cut the branch below this node from read ahead.
+		 */
+		nritems = 0;
+		generation = 0;
+	}
+
+	for (i = 0; i < nritems; i++) {
+		struct reada_extctl *rec;
+		u64 n_gen;
+		struct btrfs_key key;
+		struct btrfs_key next_key;
+
+		btrfs_node_key_to_cpu(eb, &key, i);
+		if (i + 1 < nritems)
+			btrfs_node_key_to_cpu(eb, &next_key, i + 1);
+		else
+			next_key = re->top;
+		bytenr = btrfs_node_blockptr(eb, i);
+		n_gen = btrfs_node_ptr_generation(eb, i);
+
+		list_for_each_entry(rec, &list, list) {
+			struct reada_control *rc = rec->rc;
+
+			/*
+			 * if the generation doesn't match, just ignore this
+			 * extctl. This will probably cut off a branch from
+			 * prefetch. Alternatively one could start a new (sub-)
+			 * prefetch for this branch, starting again from root.
+			 * FIXME: move the generation check out of this loop
+			 */
+#ifdef DEBUG
+			if (rec->generation != generation) {
+				printk(KERN_DEBUG "generation mismatch for "
+						"(%llu,%d,%llu) %llu != %llu\n",
+				       key.objectid, key.type, key.offset,
+				       rec->generation, generation);
+			}
+#endif
+			if (rec->generation == generation &&
+			    btrfs_comp_cpu_keys(&key, &rc->key_end) < 0 &&
+			    btrfs_comp_cpu_keys(&next_key, &rc->key_start) > 0)
+				reada_add_block(rc, bytenr, &next_key,
+						level - 1, n_gen);
+		}
+	}
+	/*
+	 * free extctl records
+	 */
+	while (!list_empty(&list)) {
+		struct reada_control *rc;
+		struct reada_extctl *rec;
+
+		rec = list_first_entry(&list, struct reada_extctl, list);
+		list_del(&rec->list);
+		rc = rec->rc;
+		kfree(rec);
+
+		kref_get(&rc->refcnt);
+		if (atomic_dec_and_test(&rc->elems)) {
+			kref_put(&rc->refcnt, reada_control_release);
+			wake_up(&rc->wait);
+		}
+		kref_put(&rc->refcnt, reada_control_release);
+
+		reada_extent_put(fs_info, re);	/* one ref for each entry */
+	}
+	reada_extent_put(fs_info, re);	/* our ref */
+	if (for_dev)
+		atomic_dec(&for_dev->reada_in_flight);
+
+	return 0;
+}
+
+/*
+ * start is passed separately in case eb in NULL, which may be the case with
+ * failed I/O
+ */
+int btree_readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
+			 u64 start, int err)
+{
+	int ret;
+
+	ret = __readahead_hook(root, eb, start, err);
+
+	reada_start_machine(root->fs_info);
+
+	return ret;
+}
+
+static struct reada_zone *reada_find_zone(struct btrfs_fs_info *fs_info,
+					  struct btrfs_device *dev, u64 logical,
+					  struct btrfs_bio *bbio)
+{
+	int ret;
+	int looped = 0;
+	struct reada_zone *zone;
+	struct btrfs_block_group_cache *cache = NULL;
+	u64 start;
+	u64 end;
+	int i;
+
+again:
+	zone = NULL;
+	spin_lock(&fs_info->reada_lock);
+	ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone,
+				     logical >> PAGE_CACHE_SHIFT, 1);
+	if (ret == 1)
+		kref_get(&zone->refcnt);
+	spin_unlock(&fs_info->reada_lock);
+
+	if (ret == 1) {
+		if (logical >= zone->start && logical < zone->end)
+			return zone;
+		spin_lock(&fs_info->reada_lock);
+		kref_put(&zone->refcnt, reada_zone_release);
+		spin_unlock(&fs_info->reada_lock);
+	}
+
+	if (looped)
+		return NULL;
+
+	cache = btrfs_lookup_block_group(fs_info, logical);
+	if (!cache)
+		return NULL;
+
+	start = cache->key.objectid;
+	end = start + cache->key.offset - 1;
+	btrfs_put_block_group(cache);
+
+	zone = kzalloc(sizeof(*zone), GFP_NOFS);
+	if (!zone)
+		return NULL;
+
+	zone->start = start;
+	zone->end = end;
+	INIT_LIST_HEAD(&zone->list);
+	spin_lock_init(&zone->lock);
+	zone->locked = 0;
+	kref_init(&zone->refcnt);
+	zone->elems = 0;
+	zone->device = dev; /* our device always sits at index 0 */
+	for (i = 0; i < bbio->num_stripes; ++i) {
+		/* bounds have already been checked */
+		zone->devs[i] = bbio->stripes[i].dev;
+	}
+	zone->ndevs = bbio->num_stripes;
+
+	spin_lock(&fs_info->reada_lock);
+	ret = radix_tree_insert(&dev->reada_zones,
+				(unsigned long)zone->end >> PAGE_CACHE_SHIFT,
+				zone);
+	spin_unlock(&fs_info->reada_lock);
+
+	if (ret) {
+		kfree(zone);
+		looped = 1;
+		goto again;
+	}
+
+	return zone;
+}
+
+static struct reada_extent *reada_find_extent(struct btrfs_root *root,
+					      u64 logical,
+					      struct btrfs_key *top, int level)
+{
+	int ret;
+	int looped = 0;
+	struct reada_extent *re = NULL;
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree;
+	struct btrfs_bio *bbio = NULL;
+	struct btrfs_device *dev;
+	u32 blocksize;
+	u64 length;
+	int nzones = 0;
+	int i;
+	unsigned long index = logical >> PAGE_CACHE_SHIFT;
+
+again:
+	spin_lock(&fs_info->reada_lock);
+	re = radix_tree_lookup(&fs_info->reada_tree, index);
+	if (re)
+		kref_get(&re->refcnt);
+	spin_unlock(&fs_info->reada_lock);
+
+	if (re || looped)
+		return re;
+
+	re = kzalloc(sizeof(*re), GFP_NOFS);
+	if (!re)
+		return NULL;
+
+	blocksize = btrfs_level_size(root, level);
+	re->logical = logical;
+	re->blocksize = blocksize;
+	re->top = *top;
+	INIT_LIST_HEAD(&re->extctl);
+	spin_lock_init(&re->lock);
+	kref_init(&re->refcnt);
+
+	/*
+	 * map block
+	 */
+	length = blocksize;
+	ret = btrfs_map_block(map_tree, REQ_WRITE, logical, &length, &bbio, 0);
+	if (ret || !bbio || length < blocksize)
+		goto error;
+
+	if (bbio->num_stripes > MAX_MIRRORS) {
+		printk(KERN_ERR "btrfs readahead: more than %d copies not "
+				"supported", MAX_MIRRORS);
+		goto error;
+	}
+
+	for (nzones = 0; nzones < bbio->num_stripes; ++nzones) {
+		struct reada_zone *zone;
+
+		dev = bbio->stripes[nzones].dev;
+		zone = reada_find_zone(fs_info, dev, logical, bbio);
+		if (!zone)
+			break;
+
+		re->zones[nzones] = zone;
+		spin_lock(&zone->lock);
+		if (!zone->elems)
+			kref_get(&zone->refcnt);
+		++zone->elems;
+		spin_unlock(&zone->lock);
+		spin_lock(&fs_info->reada_lock);
+		kref_put(&zone->refcnt, reada_zone_release);
+		spin_unlock(&fs_info->reada_lock);
+	}
+	re->nzones = nzones;
+	if (nzones == 0) {
+		/* not a single zone found, error and out */
+		goto error;
+	}
+
+	/* insert extent in reada_tree + all per-device trees, all or nothing */
+	spin_lock(&fs_info->reada_lock);
+	ret = radix_tree_insert(&fs_info->reada_tree, index, re);
+	if (ret) {
+		spin_unlock(&fs_info->reada_lock);
+		if (ret != -ENOMEM) {
+			/* someone inserted the extent in the meantime */
+			looped = 1;
+		}
+		goto error;
+	}
+	for (i = 0; i < nzones; ++i) {
+		dev = bbio->stripes[i].dev;
+		ret = radix_tree_insert(&dev->reada_extents, index, re);
+		if (ret) {
+			while (--i >= 0) {
+				dev = bbio->stripes[i].dev;
+				BUG_ON(dev == NULL);
+				radix_tree_delete(&dev->reada_extents, index);
+			}
+			BUG_ON(fs_info == NULL);
+			radix_tree_delete(&fs_info->reada_tree, index);
+			spin_unlock(&fs_info->reada_lock);
+			goto error;
+		}
+	}
+	spin_unlock(&fs_info->reada_lock);
+
+	kfree(bbio);
+	return re;
+
+error:
+	while (nzones) {
+		struct reada_zone *zone;
+
+		--nzones;
+		zone = re->zones[nzones];
+		kref_get(&zone->refcnt);
+		spin_lock(&zone->lock);
+		--zone->elems;
+		if (zone->elems == 0) {
+			/*
+			 * no fs_info->reada_lock needed, as this can't be
+			 * the last ref
+			 */
+			kref_put(&zone->refcnt, reada_zone_release);
+		}
+		spin_unlock(&zone->lock);
+
+		spin_lock(&fs_info->reada_lock);
+		kref_put(&zone->refcnt, reada_zone_release);
+		spin_unlock(&fs_info->reada_lock);
+	}
+	kfree(bbio);
+	kfree(re);
+	if (looped)
+		goto again;
+	return NULL;
+}
+
+static void reada_kref_dummy(struct kref *kr)
+{
+}
+
+static void reada_extent_put(struct btrfs_fs_info *fs_info,
+			     struct reada_extent *re)
+{
+	int i;
+	unsigned long index = re->logical >> PAGE_CACHE_SHIFT;
+
+	spin_lock(&fs_info->reada_lock);
+	if (!kref_put(&re->refcnt, reada_kref_dummy)) {
+		spin_unlock(&fs_info->reada_lock);
+		return;
+	}
+
+	radix_tree_delete(&fs_info->reada_tree, index);
+	for (i = 0; i < re->nzones; ++i) {
+		struct reada_zone *zone = re->zones[i];
+
+		radix_tree_delete(&zone->device->reada_extents, index);
+	}
+
+	spin_unlock(&fs_info->reada_lock);
+
+	for (i = 0; i < re->nzones; ++i) {
+		struct reada_zone *zone = re->zones[i];
+
+		kref_get(&zone->refcnt);
+		spin_lock(&zone->lock);
+		--zone->elems;
+		if (zone->elems == 0) {
+			/* no fs_info->reada_lock needed, as this can't be
+			 * the last ref */
+			kref_put(&zone->refcnt, reada_zone_release);
+		}
+		spin_unlock(&zone->lock);
+
+		spin_lock(&fs_info->reada_lock);
+		kref_put(&zone->refcnt, reada_zone_release);
+		spin_unlock(&fs_info->reada_lock);
+	}
+	if (re->scheduled_for)
+		atomic_dec(&re->scheduled_for->reada_in_flight);
+
+	kfree(re);
+}
+
+static void reada_zone_release(struct kref *kref)
+{
+	struct reada_zone *zone = container_of(kref, struct reada_zone, refcnt);
+
+	radix_tree_delete(&zone->device->reada_zones,
+			  zone->end >> PAGE_CACHE_SHIFT);
+
+	kfree(zone);
+}
+
+static void reada_control_release(struct kref *kref)
+{
+	struct reada_control *rc = container_of(kref, struct reada_control,
+						refcnt);
+
+	kfree(rc);
+}
+
+static int reada_add_block(struct reada_control *rc, u64 logical,
+			   struct btrfs_key *top, int level, u64 generation)
+{
+	struct btrfs_root *root = rc->root;
+	struct reada_extent *re;
+	struct reada_extctl *rec;
+
+	re = reada_find_extent(root, logical, top, level); /* takes one ref */
+	if (!re)
+		return -1;
+
+	rec = kzalloc(sizeof(*rec), GFP_NOFS);
+	if (!rec) {
+		reada_extent_put(root->fs_info, re);
+		return -1;
+	}
+
+	rec->rc = rc;
+	rec->generation = generation;
+	atomic_inc(&rc->elems);
+
+	spin_lock(&re->lock);
+	list_add_tail(&rec->list, &re->extctl);
+	spin_unlock(&re->lock);
+
+	/* leave the ref on the extent */
+
+	return 0;
+}
+
+/*
+ * called with fs_info->reada_lock held
+ */
+static void reada_peer_zones_set_lock(struct reada_zone *zone, int lock)
+{
+	int i;
+	unsigned long index = zone->end >> PAGE_CACHE_SHIFT;
+
+	for (i = 0; i < zone->ndevs; ++i) {
+		struct reada_zone *peer;
+		peer = radix_tree_lookup(&zone->devs[i]->reada_zones, index);
+		if (peer && peer->device != zone->device)
+			peer->locked = lock;
+	}
+}
+
+/*
+ * called with fs_info->reada_lock held
+ */
+static int reada_pick_zone(struct btrfs_device *dev)
+{
+	struct reada_zone *top_zone = NULL;
+	struct reada_zone *top_locked_zone = NULL;
+	u64 top_elems = 0;
+	u64 top_locked_elems = 0;
+	unsigned long index = 0;
+	int ret;
+
+	if (dev->reada_curr_zone) {
+		reada_peer_zones_set_lock(dev->reada_curr_zone, 0);
+		kref_put(&dev->reada_curr_zone->refcnt, reada_zone_release);
+		dev->reada_curr_zone = NULL;
+	}
+	/* pick the zone with the most elements */
+	while (1) {
+		struct reada_zone *zone;
+
+		ret = radix_tree_gang_lookup(&dev->reada_zones,
+					     (void **)&zone, index, 1);
+		if (ret == 0)
+			break;
+		index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
+		if (zone->locked) {
+			if (zone->elems > top_locked_elems) {
+				top_locked_elems = zone->elems;
+				top_locked_zone = zone;
+			}
+		} else {
+			if (zone->elems > top_elems) {
+				top_elems = zone->elems;
+				top_zone = zone;
+			}
+		}
+	}
+	if (top_zone)
+		dev->reada_curr_zone = top_zone;
+	else if (top_locked_zone)
+		dev->reada_curr_zone = top_locked_zone;
+	else
+		return 0;
+
+	dev->reada_next = dev->reada_curr_zone->start;
+	kref_get(&dev->reada_curr_zone->refcnt);
+	reada_peer_zones_set_lock(dev->reada_curr_zone, 1);
+
+	return 1;
+}
+
+static int reada_start_machine_dev(struct btrfs_fs_info *fs_info,
+				   struct btrfs_device *dev)
+{
+	struct reada_extent *re = NULL;
+	int mirror_num = 0;
+	struct extent_buffer *eb = NULL;
+	u64 logical;
+	u32 blocksize;
+	int ret;
+	int i;
+	int need_kick = 0;
+
+	spin_lock(&fs_info->reada_lock);
+	if (dev->reada_curr_zone == NULL) {
+		ret = reada_pick_zone(dev);
+		if (!ret) {
+			spin_unlock(&fs_info->reada_lock);
+			return 0;
+		}
+	}
+	/*
+	 * FIXME currently we issue the reads one extent at a time. If we have
+	 * a contiguous block of extents, we could also coagulate them or use
+	 * plugging to speed things up
+	 */
+	ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
+				     dev->reada_next >> PAGE_CACHE_SHIFT, 1);
+	if (ret == 0 || re->logical >= dev->reada_curr_zone->end) {
+		ret = reada_pick_zone(dev);
+		if (!ret) {
+			spin_unlock(&fs_info->reada_lock);
+			return 0;
+		}
+		re = NULL;
+		ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
+					dev->reada_next >> PAGE_CACHE_SHIFT, 1);
+	}
+	if (ret == 0) {
+		spin_unlock(&fs_info->reada_lock);
+		return 0;
+	}
+	dev->reada_next = re->logical + re->blocksize;
+	kref_get(&re->refcnt);
+
+	spin_unlock(&fs_info->reada_lock);
+
+	/*
+	 * find mirror num
+	 */
+	for (i = 0; i < re->nzones; ++i) {
+		if (re->zones[i]->device == dev) {
+			mirror_num = i + 1;
+			break;
+		}
+	}
+	logical = re->logical;
+	blocksize = re->blocksize;
+
+	spin_lock(&re->lock);
+	if (re->scheduled_for == NULL) {
+		re->scheduled_for = dev;
+		need_kick = 1;
+	}
+	spin_unlock(&re->lock);
+
+	reada_extent_put(fs_info, re);
+
+	if (!need_kick)
+		return 0;
+
+	atomic_inc(&dev->reada_in_flight);
+	ret = reada_tree_block_flagged(fs_info->extent_root, logical, blocksize,
+			 mirror_num, &eb);
+	if (ret)
+		__readahead_hook(fs_info->extent_root, NULL, logical, ret);
+	else if (eb)
+		__readahead_hook(fs_info->extent_root, eb, eb->start, ret);
+
+	if (eb)
+		free_extent_buffer(eb);
+
+	return 1;
+
+}
+
+static void reada_start_machine_worker(struct btrfs_work *work)
+{
+	struct reada_machine_work *rmw;
+	struct btrfs_fs_info *fs_info;
+
+	rmw = container_of(work, struct reada_machine_work, work);
+	fs_info = rmw->fs_info;
+
+	kfree(rmw);
+
+	__reada_start_machine(fs_info);
+}
+
+static void __reada_start_machine(struct btrfs_fs_info *fs_info)
+{
+	struct btrfs_device *device;
+	struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+	u64 enqueued;
+	u64 total = 0;
+	int i;
+
+	do {
+		enqueued = 0;
+		list_for_each_entry(device, &fs_devices->devices, dev_list) {
+			if (atomic_read(&device->reada_in_flight) <
+			    MAX_IN_FLIGHT)
+				enqueued += reada_start_machine_dev(fs_info,
+								    device);
+		}
+		total += enqueued;
+	} while (enqueued && total < 10000);
+
+	if (enqueued == 0)
+		return;
+
+	/*
+	 * If everything is already in the cache, this is effectively single
+	 * threaded. To a) not hold the caller for too long and b) to utilize
+	 * more cores, we broke the loop above after 10000 iterations and now
+	 * enqueue to workers to finish it. This will distribute the load to
+	 * the cores.
+	 */
+	for (i = 0; i < 2; ++i)
+		reada_start_machine(fs_info);
+}
+
+static void reada_start_machine(struct btrfs_fs_info *fs_info)
+{
+	struct reada_machine_work *rmw;
+
+	rmw = kzalloc(sizeof(*rmw), GFP_NOFS);
+	if (!rmw) {
+		/* FIXME we cannot handle this properly right now */
+		BUG();
+	}
+	rmw->work.func = reada_start_machine_worker;
+	rmw->fs_info = fs_info;
+
+	btrfs_queue_worker(&fs_info->readahead_workers, &rmw->work);
+}
+
+#ifdef DEBUG
+static void dump_devs(struct btrfs_fs_info *fs_info, int all)
+{
+	struct btrfs_device *device;
+	struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+	unsigned long index;
+	int ret;
+	int i;
+	int j;
+	int cnt;
+
+	spin_lock(&fs_info->reada_lock);
+	list_for_each_entry(device, &fs_devices->devices, dev_list) {
+		printk(KERN_DEBUG "dev %lld has %d in flight\n", device->devid,
+			atomic_read(&device->reada_in_flight));
+		index = 0;
+		while (1) {
+			struct reada_zone *zone;
+			ret = radix_tree_gang_lookup(&device->reada_zones,
+						     (void **)&zone, index, 1);
+			if (ret == 0)
+				break;
+			printk(KERN_DEBUG "  zone %llu-%llu elems %llu locked "
+				"%d devs", zone->start, zone->end, zone->elems,
+				zone->locked);
+			for (j = 0; j < zone->ndevs; ++j) {
+				printk(KERN_CONT " %lld",
+					zone->devs[j]->devid);
+			}
+			if (device->reada_curr_zone == zone)
+				printk(KERN_CONT " curr off %llu",
+					device->reada_next - zone->start);
+			printk(KERN_CONT "\n");
+			index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
+		}
+		cnt = 0;
+		index = 0;
+		while (all) {
+			struct reada_extent *re = NULL;
+
+			ret = radix_tree_gang_lookup(&device->reada_extents,
+						     (void **)&re, index, 1);
+			if (ret == 0)
+				break;
+			printk(KERN_DEBUG
+				"  re: logical %llu size %u empty %d for %lld",
+				re->logical, re->blocksize,
+				list_empty(&re->extctl), re->scheduled_for ?
+				re->scheduled_for->devid : -1);
+
+			for (i = 0; i < re->nzones; ++i) {
+				printk(KERN_CONT " zone %llu-%llu devs",
+					re->zones[i]->start,
+					re->zones[i]->end);
+				for (j = 0; j < re->zones[i]->ndevs; ++j) {
+					printk(KERN_CONT " %lld",
+						re->zones[i]->devs[j]->devid);
+				}
+			}
+			printk(KERN_CONT "\n");
+			index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+			if (++cnt > 15)
+				break;
+		}
+	}
+
+	index = 0;
+	cnt = 0;
+	while (all) {
+		struct reada_extent *re = NULL;
+
+		ret = radix_tree_gang_lookup(&fs_info->reada_tree, (void **)&re,
+					     index, 1);
+		if (ret == 0)
+			break;
+		if (!re->scheduled_for) {
+			index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+			continue;
+		}
+		printk(KERN_DEBUG
+			"re: logical %llu size %u list empty %d for %lld",
+			re->logical, re->blocksize, list_empty(&re->extctl),
+			re->scheduled_for ? re->scheduled_for->devid : -1);
+		for (i = 0; i < re->nzones; ++i) {
+			printk(KERN_CONT " zone %llu-%llu devs",
+				re->zones[i]->start,
+				re->zones[i]->end);
+			for (i = 0; i < re->nzones; ++i) {
+				printk(KERN_CONT " zone %llu-%llu devs",
+					re->zones[i]->start,
+					re->zones[i]->end);
+				for (j = 0; j < re->zones[i]->ndevs; ++j) {
+					printk(KERN_CONT " %lld",
+						re->zones[i]->devs[j]->devid);
+				}
+			}
+		}
+		printk(KERN_CONT "\n");
+		index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
+	}
+	spin_unlock(&fs_info->reada_lock);
+}
+#endif
+
+/*
+ * interface
+ */
+struct reada_control *btrfs_reada_add(struct btrfs_root *root,
+			struct btrfs_key *key_start, struct btrfs_key *key_end)
+{
+	struct reada_control *rc;
+	u64 start;
+	u64 generation;
+	int level;
+	struct extent_buffer *node;
+	static struct btrfs_key max_key = {
+		.objectid = (u64)-1,
+		.type = (u8)-1,
+		.offset = (u64)-1
+	};
+
+	rc = kzalloc(sizeof(*rc), GFP_NOFS);
+	if (!rc)
+		return ERR_PTR(-ENOMEM);
+
+	rc->root = root;
+	rc->key_start = *key_start;
+	rc->key_end = *key_end;
+	atomic_set(&rc->elems, 0);
+	init_waitqueue_head(&rc->wait);
+	kref_init(&rc->refcnt);
+	kref_get(&rc->refcnt); /* one ref for having elements */
+
+	node = btrfs_root_node(root);
+	start = node->start;
+	level = btrfs_header_level(node);
+	generation = btrfs_header_generation(node);
+	free_extent_buffer(node);
+
+	reada_add_block(rc, start, &max_key, level, generation);
+
+	reada_start_machine(root->fs_info);
+
+	return rc;
+}
+
+#ifdef DEBUG
+int btrfs_reada_wait(void *handle)
+{
+	struct reada_control *rc = handle;
+
+	while (atomic_read(&rc->elems)) {
+		wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
+				   5 * HZ);
+		dump_devs(rc->root->fs_info, rc->elems < 10 ? 1 : 0);
+	}
+
+	dump_devs(rc->root->fs_info, rc->elems < 10 ? 1 : 0);
+
+	kref_put(&rc->refcnt, reada_control_release);
+
+	return 0;
+}
+#else
+int btrfs_reada_wait(void *handle)
+{
+	struct reada_control *rc = handle;
+
+	while (atomic_read(&rc->elems)) {
+		wait_event(rc->wait, atomic_read(&rc->elems) == 0);
+	}
+
+	kref_put(&rc->refcnt, reada_control_release);
+
+	return 0;
+}
+#endif
+
+void btrfs_reada_detach(void *handle)
+{
+	struct reada_control *rc = handle;
+
+	kref_put(&rc->refcnt, reada_control_release);
+}
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 59bb176..dff29d5 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1174,6 +1174,8 @@
 			list_add_tail(&new_edge->list[UPPER],
 				      &new_node->lower);
 		}
+	} else {
+		list_add_tail(&new_node->lower, &cache->leaves);
 	}
 
 	rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
@@ -2041,8 +2043,7 @@
 		BUG_ON(IS_ERR(trans));
 		trans->block_rsv = rc->block_rsv;
 
-		ret = btrfs_block_rsv_check(trans, root, rc->block_rsv,
-					    min_reserved, 0);
+		ret = btrfs_block_rsv_refill(root, rc->block_rsv, min_reserved);
 		if (ret) {
 			BUG_ON(ret != -EAGAIN);
 			ret = btrfs_commit_transaction(trans, root);
@@ -2152,8 +2153,7 @@
 again:
 	if (!err) {
 		num_bytes = rc->merging_rsv_size;
-		ret = btrfs_block_rsv_add(NULL, root, rc->block_rsv,
-					  num_bytes);
+		ret = btrfs_block_rsv_add(root, rc->block_rsv, num_bytes);
 		if (ret)
 			err = ret;
 	}
@@ -2427,7 +2427,7 @@
 	num_bytes = calcu_metadata_size(rc, node, 1) * 2;
 
 	trans->block_rsv = rc->block_rsv;
-	ret = btrfs_block_rsv_add(trans, root, rc->block_rsv, num_bytes);
+	ret = btrfs_block_rsv_add(root, rc->block_rsv, num_bytes);
 	if (ret) {
 		if (ret == -EAGAIN)
 			rc->commit_transaction = 1;
@@ -2922,6 +2922,7 @@
 	unsigned long last_index;
 	struct page *page;
 	struct file_ra_state *ra;
+	gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
 	int nr = 0;
 	int ret = 0;
 
@@ -2956,7 +2957,7 @@
 						  ra, NULL, index,
 						  last_index + 1 - index);
 			page = find_or_create_page(inode->i_mapping, index,
-						   GFP_NOFS);
+						   mask);
 			if (!page) {
 				btrfs_delalloc_release_metadata(inode,
 							PAGE_CACHE_SIZE);
@@ -3323,8 +3324,11 @@
 	}
 
 	key.objectid = ref_objectid;
-	key.offset = ref_offset;
 	key.type = BTRFS_EXTENT_DATA_KEY;
+	if (ref_offset > ((u64)-1 << 32))
+		key.offset = 0;
+	else
+		key.offset = ref_offset;
 
 	path->search_commit_root = 1;
 	path->skip_locking = 1;
@@ -3645,14 +3649,11 @@
 	 * btrfs_init_reloc_root will use them when there
 	 * is no reservation in transaction handle.
 	 */
-	ret = btrfs_block_rsv_add(NULL, rc->extent_root, rc->block_rsv,
+	ret = btrfs_block_rsv_add(rc->extent_root, rc->block_rsv,
 				  rc->extent_root->nodesize * 256);
 	if (ret)
 		return ret;
 
-	rc->block_rsv->refill_used = 1;
-	btrfs_add_durable_block_rsv(rc->extent_root->fs_info, rc->block_rsv);
-
 	memset(&rc->cluster, 0, sizeof(rc->cluster));
 	rc->search_start = rc->block_group->key.objectid;
 	rc->extents_found = 0;
@@ -3777,8 +3778,7 @@
 			}
 		}
 
-		ret = btrfs_block_rsv_check(trans, rc->extent_root,
-					    rc->block_rsv, 0, 5);
+		ret = btrfs_block_rsv_check(rc->extent_root, rc->block_rsv, 5);
 		if (ret < 0) {
 			if (ret != -EAGAIN) {
 				err = ret;
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index a8d03d5..c27bcb6 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -17,10 +17,14 @@
  */
 
 #include <linux/blkdev.h>
+#include <linux/ratelimit.h>
 #include "ctree.h"
 #include "volumes.h"
 #include "disk-io.h"
 #include "ordered-data.h"
+#include "transaction.h"
+#include "backref.h"
+#include "extent_io.h"
 
 /*
  * This is only the first step towards a full-features scrub. It reads all
@@ -29,15 +33,12 @@
  * any can be found.
  *
  * Future enhancements:
- *  - To enhance the performance, better read-ahead strategies for the
- *    extent-tree can be employed.
  *  - In case an unrepairable extent is encountered, track which files are
  *    affected and report them
  *  - In case of a read error on files with nodatasum, map the file and read
  *    the extent to trigger a writeback of the good copy
  *  - track and record media errors, throw out bad devices
  *  - add a mode to also read unallocated space
- *  - make the prefetch cancellable
  */
 
 struct scrub_bio;
@@ -63,7 +64,7 @@
 struct scrub_page {
 	u64			flags;  /* extent flags */
 	u64			generation;
-	u64			mirror_num;
+	int			mirror_num;
 	int			have_csum;
 	u8			csum[BTRFS_CSUM_SIZE];
 };
@@ -87,6 +88,7 @@
 	int			first_free;
 	int			curr;
 	atomic_t		in_flight;
+	atomic_t		fixup_cnt;
 	spinlock_t		list_lock;
 	wait_queue_head_t	list_wait;
 	u16			csum_size;
@@ -100,6 +102,27 @@
 	spinlock_t		stat_lock;
 };
 
+struct scrub_fixup_nodatasum {
+	struct scrub_dev	*sdev;
+	u64			logical;
+	struct btrfs_root	*root;
+	struct btrfs_work	work;
+	int			mirror_num;
+};
+
+struct scrub_warning {
+	struct btrfs_path	*path;
+	u64			extent_item_size;
+	char			*scratch_buf;
+	char			*msg_buf;
+	const char		*errstr;
+	sector_t		sector;
+	u64			logical;
+	struct btrfs_device	*dev;
+	int			msg_bufsize;
+	int			scratch_bufsize;
+};
+
 static void scrub_free_csums(struct scrub_dev *sdev)
 {
 	while (!list_empty(&sdev->csum_list)) {
@@ -175,14 +198,15 @@
 
 		if (i != SCRUB_BIOS_PER_DEV-1)
 			sdev->bios[i]->next_free = i + 1;
-		 else
+		else
 			sdev->bios[i]->next_free = -1;
 	}
 	sdev->first_free = 0;
 	sdev->curr = -1;
 	atomic_set(&sdev->in_flight, 0);
+	atomic_set(&sdev->fixup_cnt, 0);
 	atomic_set(&sdev->cancel_req, 0);
-	sdev->csum_size = btrfs_super_csum_size(&fs_info->super_copy);
+	sdev->csum_size = btrfs_super_csum_size(fs_info->super_copy);
 	INIT_LIST_HEAD(&sdev->csum_list);
 
 	spin_lock_init(&sdev->list_lock);
@@ -195,24 +219,366 @@
 	return ERR_PTR(-ENOMEM);
 }
 
+static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root, void *ctx)
+{
+	u64 isize;
+	u32 nlink;
+	int ret;
+	int i;
+	struct extent_buffer *eb;
+	struct btrfs_inode_item *inode_item;
+	struct scrub_warning *swarn = ctx;
+	struct btrfs_fs_info *fs_info = swarn->dev->dev_root->fs_info;
+	struct inode_fs_paths *ipath = NULL;
+	struct btrfs_root *local_root;
+	struct btrfs_key root_key;
+
+	root_key.objectid = root;
+	root_key.type = BTRFS_ROOT_ITEM_KEY;
+	root_key.offset = (u64)-1;
+	local_root = btrfs_read_fs_root_no_name(fs_info, &root_key);
+	if (IS_ERR(local_root)) {
+		ret = PTR_ERR(local_root);
+		goto err;
+	}
+
+	ret = inode_item_info(inum, 0, local_root, swarn->path);
+	if (ret) {
+		btrfs_release_path(swarn->path);
+		goto err;
+	}
+
+	eb = swarn->path->nodes[0];
+	inode_item = btrfs_item_ptr(eb, swarn->path->slots[0],
+					struct btrfs_inode_item);
+	isize = btrfs_inode_size(eb, inode_item);
+	nlink = btrfs_inode_nlink(eb, inode_item);
+	btrfs_release_path(swarn->path);
+
+	ipath = init_ipath(4096, local_root, swarn->path);
+	if (IS_ERR(ipath)) {
+		ret = PTR_ERR(ipath);
+		ipath = NULL;
+		goto err;
+	}
+	ret = paths_from_inode(inum, ipath);
+
+	if (ret < 0)
+		goto err;
+
+	/*
+	 * we deliberately ignore the bit ipath might have been too small to
+	 * hold all of the paths here
+	 */
+	for (i = 0; i < ipath->fspath->elem_cnt; ++i)
+		printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+			"%s, sector %llu, root %llu, inode %llu, offset %llu, "
+			"length %llu, links %u (path: %s)\n", swarn->errstr,
+			swarn->logical, swarn->dev->name,
+			(unsigned long long)swarn->sector, root, inum, offset,
+			min(isize - offset, (u64)PAGE_SIZE), nlink,
+			(char *)(unsigned long)ipath->fspath->val[i]);
+
+	free_ipath(ipath);
+	return 0;
+
+err:
+	printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+		"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
+		"resolving failed with ret=%d\n", swarn->errstr,
+		swarn->logical, swarn->dev->name,
+		(unsigned long long)swarn->sector, root, inum, offset, ret);
+
+	free_ipath(ipath);
+	return 0;
+}
+
+static void scrub_print_warning(const char *errstr, struct scrub_bio *sbio,
+				int ix)
+{
+	struct btrfs_device *dev = sbio->sdev->dev;
+	struct btrfs_fs_info *fs_info = dev->dev_root->fs_info;
+	struct btrfs_path *path;
+	struct btrfs_key found_key;
+	struct extent_buffer *eb;
+	struct btrfs_extent_item *ei;
+	struct scrub_warning swarn;
+	u32 item_size;
+	int ret;
+	u64 ref_root;
+	u8 ref_level;
+	unsigned long ptr = 0;
+	const int bufsize = 4096;
+	u64 extent_offset;
+
+	path = btrfs_alloc_path();
+
+	swarn.scratch_buf = kmalloc(bufsize, GFP_NOFS);
+	swarn.msg_buf = kmalloc(bufsize, GFP_NOFS);
+	swarn.sector = (sbio->physical + ix * PAGE_SIZE) >> 9;
+	swarn.logical = sbio->logical + ix * PAGE_SIZE;
+	swarn.errstr = errstr;
+	swarn.dev = dev;
+	swarn.msg_bufsize = bufsize;
+	swarn.scratch_bufsize = bufsize;
+
+	if (!path || !swarn.scratch_buf || !swarn.msg_buf)
+		goto out;
+
+	ret = extent_from_logical(fs_info, swarn.logical, path, &found_key);
+	if (ret < 0)
+		goto out;
+
+	extent_offset = swarn.logical - found_key.objectid;
+	swarn.extent_item_size = found_key.offset;
+
+	eb = path->nodes[0];
+	ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
+	item_size = btrfs_item_size_nr(eb, path->slots[0]);
+
+	if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
+		do {
+			ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
+							&ref_root, &ref_level);
+			printk(KERN_WARNING "%s at logical %llu on dev %s, "
+				"sector %llu: metadata %s (level %d) in tree "
+				"%llu\n", errstr, swarn.logical, dev->name,
+				(unsigned long long)swarn.sector,
+				ref_level ? "node" : "leaf",
+				ret < 0 ? -1 : ref_level,
+				ret < 0 ? -1 : ref_root);
+		} while (ret != 1);
+	} else {
+		swarn.path = path;
+		iterate_extent_inodes(fs_info, path, found_key.objectid,
+					extent_offset,
+					scrub_print_warning_inode, &swarn);
+	}
+
+out:
+	btrfs_free_path(path);
+	kfree(swarn.scratch_buf);
+	kfree(swarn.msg_buf);
+}
+
+static int scrub_fixup_readpage(u64 inum, u64 offset, u64 root, void *ctx)
+{
+	struct page *page = NULL;
+	unsigned long index;
+	struct scrub_fixup_nodatasum *fixup = ctx;
+	int ret;
+	int corrected = 0;
+	struct btrfs_key key;
+	struct inode *inode = NULL;
+	u64 end = offset + PAGE_SIZE - 1;
+	struct btrfs_root *local_root;
+
+	key.objectid = root;
+	key.type = BTRFS_ROOT_ITEM_KEY;
+	key.offset = (u64)-1;
+	local_root = btrfs_read_fs_root_no_name(fixup->root->fs_info, &key);
+	if (IS_ERR(local_root))
+		return PTR_ERR(local_root);
+
+	key.type = BTRFS_INODE_ITEM_KEY;
+	key.objectid = inum;
+	key.offset = 0;
+	inode = btrfs_iget(fixup->root->fs_info->sb, &key, local_root, NULL);
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+
+	index = offset >> PAGE_CACHE_SHIFT;
+
+	page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
+	if (!page) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	if (PageUptodate(page)) {
+		struct btrfs_mapping_tree *map_tree;
+		if (PageDirty(page)) {
+			/*
+			 * we need to write the data to the defect sector. the
+			 * data that was in that sector is not in memory,
+			 * because the page was modified. we must not write the
+			 * modified page to that sector.
+			 *
+			 * TODO: what could be done here: wait for the delalloc
+			 *       runner to write out that page (might involve
+			 *       COW) and see whether the sector is still
+			 *       referenced afterwards.
+			 *
+			 * For the meantime, we'll treat this error
+			 * incorrectable, although there is a chance that a
+			 * later scrub will find the bad sector again and that
+			 * there's no dirty page in memory, then.
+			 */
+			ret = -EIO;
+			goto out;
+		}
+		map_tree = &BTRFS_I(inode)->root->fs_info->mapping_tree;
+		ret = repair_io_failure(map_tree, offset, PAGE_SIZE,
+					fixup->logical, page,
+					fixup->mirror_num);
+		unlock_page(page);
+		corrected = !ret;
+	} else {
+		/*
+		 * we need to get good data first. the general readpage path
+		 * will call repair_io_failure for us, we just have to make
+		 * sure we read the bad mirror.
+		 */
+		ret = set_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
+					EXTENT_DAMAGED, GFP_NOFS);
+		if (ret) {
+			/* set_extent_bits should give proper error */
+			WARN_ON(ret > 0);
+			if (ret > 0)
+				ret = -EFAULT;
+			goto out;
+		}
+
+		ret = extent_read_full_page(&BTRFS_I(inode)->io_tree, page,
+						btrfs_get_extent,
+						fixup->mirror_num);
+		wait_on_page_locked(page);
+
+		corrected = !test_range_bit(&BTRFS_I(inode)->io_tree, offset,
+						end, EXTENT_DAMAGED, 0, NULL);
+		if (!corrected)
+			clear_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
+						EXTENT_DAMAGED, GFP_NOFS);
+	}
+
+out:
+	if (page)
+		put_page(page);
+	if (inode)
+		iput(inode);
+
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0 && corrected) {
+		/*
+		 * we only need to call readpage for one of the inodes belonging
+		 * to this extent. so make iterate_extent_inodes stop
+		 */
+		return 1;
+	}
+
+	return -EIO;
+}
+
+static void scrub_fixup_nodatasum(struct btrfs_work *work)
+{
+	int ret;
+	struct scrub_fixup_nodatasum *fixup;
+	struct scrub_dev *sdev;
+	struct btrfs_trans_handle *trans = NULL;
+	struct btrfs_fs_info *fs_info;
+	struct btrfs_path *path;
+	int uncorrectable = 0;
+
+	fixup = container_of(work, struct scrub_fixup_nodatasum, work);
+	sdev = fixup->sdev;
+	fs_info = fixup->root->fs_info;
+
+	path = btrfs_alloc_path();
+	if (!path) {
+		spin_lock(&sdev->stat_lock);
+		++sdev->stat.malloc_errors;
+		spin_unlock(&sdev->stat_lock);
+		uncorrectable = 1;
+		goto out;
+	}
+
+	trans = btrfs_join_transaction(fixup->root);
+	if (IS_ERR(trans)) {
+		uncorrectable = 1;
+		goto out;
+	}
+
+	/*
+	 * the idea is to trigger a regular read through the standard path. we
+	 * read a page from the (failed) logical address by specifying the
+	 * corresponding copynum of the failed sector. thus, that readpage is
+	 * expected to fail.
+	 * that is the point where on-the-fly error correction will kick in
+	 * (once it's finished) and rewrite the failed sector if a good copy
+	 * can be found.
+	 */
+	ret = iterate_inodes_from_logical(fixup->logical, fixup->root->fs_info,
+						path, scrub_fixup_readpage,
+						fixup);
+	if (ret < 0) {
+		uncorrectable = 1;
+		goto out;
+	}
+	WARN_ON(ret != 1);
+
+	spin_lock(&sdev->stat_lock);
+	++sdev->stat.corrected_errors;
+	spin_unlock(&sdev->stat_lock);
+
+out:
+	if (trans && !IS_ERR(trans))
+		btrfs_end_transaction(trans, fixup->root);
+	if (uncorrectable) {
+		spin_lock(&sdev->stat_lock);
+		++sdev->stat.uncorrectable_errors;
+		spin_unlock(&sdev->stat_lock);
+		printk_ratelimited(KERN_ERR "btrfs: unable to fixup "
+					"(nodatasum) error at logical %llu\n",
+					fixup->logical);
+	}
+
+	btrfs_free_path(path);
+	kfree(fixup);
+
+	/* see caller why we're pretending to be paused in the scrub counters */
+	mutex_lock(&fs_info->scrub_lock);
+	atomic_dec(&fs_info->scrubs_running);
+	atomic_dec(&fs_info->scrubs_paused);
+	mutex_unlock(&fs_info->scrub_lock);
+	atomic_dec(&sdev->fixup_cnt);
+	wake_up(&fs_info->scrub_pause_wait);
+	wake_up(&sdev->list_wait);
+}
+
 /*
  * scrub_recheck_error gets called when either verification of the page
  * failed or the bio failed to read, e.g. with EIO. In the latter case,
  * recheck_error gets called for every page in the bio, even though only
  * one may be bad
  */
-static void scrub_recheck_error(struct scrub_bio *sbio, int ix)
+static int scrub_recheck_error(struct scrub_bio *sbio, int ix)
 {
+	struct scrub_dev *sdev = sbio->sdev;
+	u64 sector = (sbio->physical + ix * PAGE_SIZE) >> 9;
+	static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL,
+					DEFAULT_RATELIMIT_BURST);
+
 	if (sbio->err) {
-		if (scrub_fixup_io(READ, sbio->sdev->dev->bdev,
-				   (sbio->physical + ix * PAGE_SIZE) >> 9,
+		if (scrub_fixup_io(READ, sbio->sdev->dev->bdev, sector,
 				   sbio->bio->bi_io_vec[ix].bv_page) == 0) {
 			if (scrub_fixup_check(sbio, ix) == 0)
-				return;
+				return 0;
 		}
+		if (__ratelimit(&_rs))
+			scrub_print_warning("i/o error", sbio, ix);
+	} else {
+		if (__ratelimit(&_rs))
+			scrub_print_warning("checksum error", sbio, ix);
 	}
 
+	spin_lock(&sdev->stat_lock);
+	++sdev->stat.read_errors;
+	spin_unlock(&sdev->stat_lock);
+
 	scrub_fixup(sbio, ix);
+	return 1;
 }
 
 static int scrub_fixup_check(struct scrub_bio *sbio, int ix)
@@ -250,7 +616,8 @@
 	struct scrub_dev *sdev = sbio->sdev;
 	struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info;
 	struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree;
-	struct btrfs_multi_bio *multi = NULL;
+	struct btrfs_bio *bbio = NULL;
+	struct scrub_fixup_nodatasum *fixup;
 	u64 logical = sbio->logical + ix * PAGE_SIZE;
 	u64 length;
 	int i;
@@ -259,38 +626,57 @@
 
 	if ((sbio->spag[ix].flags & BTRFS_EXTENT_FLAG_DATA) &&
 	    (sbio->spag[ix].have_csum == 0)) {
+		fixup = kzalloc(sizeof(*fixup), GFP_NOFS);
+		if (!fixup)
+			goto uncorrectable;
+		fixup->sdev = sdev;
+		fixup->logical = logical;
+		fixup->root = fs_info->extent_root;
+		fixup->mirror_num = sbio->spag[ix].mirror_num;
 		/*
-		 * nodatasum, don't try to fix anything
-		 * FIXME: we can do better, open the inode and trigger a
-		 * writeback
+		 * increment scrubs_running to prevent cancel requests from
+		 * completing as long as a fixup worker is running. we must also
+		 * increment scrubs_paused to prevent deadlocking on pause
+		 * requests used for transactions commits (as the worker uses a
+		 * transaction context). it is safe to regard the fixup worker
+		 * as paused for all matters practical. effectively, we only
+		 * avoid cancellation requests from completing.
 		 */
-		goto uncorrectable;
+		mutex_lock(&fs_info->scrub_lock);
+		atomic_inc(&fs_info->scrubs_running);
+		atomic_inc(&fs_info->scrubs_paused);
+		mutex_unlock(&fs_info->scrub_lock);
+		atomic_inc(&sdev->fixup_cnt);
+		fixup->work.func = scrub_fixup_nodatasum;
+		btrfs_queue_worker(&fs_info->scrub_workers, &fixup->work);
+		return;
 	}
 
 	length = PAGE_SIZE;
 	ret = btrfs_map_block(map_tree, REQ_WRITE, logical, &length,
-			      &multi, 0);
-	if (ret || !multi || length < PAGE_SIZE) {
+			      &bbio, 0);
+	if (ret || !bbio || length < PAGE_SIZE) {
 		printk(KERN_ERR
 		       "scrub_fixup: btrfs_map_block failed us for %llu\n",
 		       (unsigned long long)logical);
 		WARN_ON(1);
+		kfree(bbio);
 		return;
 	}
 
-	if (multi->num_stripes == 1)
+	if (bbio->num_stripes == 1)
 		/* there aren't any replicas */
 		goto uncorrectable;
 
 	/*
 	 * first find a good copy
 	 */
-	for (i = 0; i < multi->num_stripes; ++i) {
-		if (i == sbio->spag[ix].mirror_num)
+	for (i = 0; i < bbio->num_stripes; ++i) {
+		if (i + 1 == sbio->spag[ix].mirror_num)
 			continue;
 
-		if (scrub_fixup_io(READ, multi->stripes[i].dev->bdev,
-				   multi->stripes[i].physical >> 9,
+		if (scrub_fixup_io(READ, bbio->stripes[i].dev->bdev,
+				   bbio->stripes[i].physical >> 9,
 				   sbio->bio->bi_io_vec[ix].bv_page)) {
 			/* I/O-error, this is not a good copy */
 			continue;
@@ -299,7 +685,7 @@
 		if (scrub_fixup_check(sbio, ix) == 0)
 			break;
 	}
-	if (i == multi->num_stripes)
+	if (i == bbio->num_stripes)
 		goto uncorrectable;
 
 	if (!sdev->readonly) {
@@ -314,25 +700,23 @@
 		}
 	}
 
-	kfree(multi);
+	kfree(bbio);
 	spin_lock(&sdev->stat_lock);
 	++sdev->stat.corrected_errors;
 	spin_unlock(&sdev->stat_lock);
 
-	if (printk_ratelimit())
-		printk(KERN_ERR "btrfs: fixed up at %llu\n",
-		       (unsigned long long)logical);
+	printk_ratelimited(KERN_ERR "btrfs: fixed up error at logical %llu\n",
+			       (unsigned long long)logical);
 	return;
 
 uncorrectable:
-	kfree(multi);
+	kfree(bbio);
 	spin_lock(&sdev->stat_lock);
 	++sdev->stat.uncorrectable_errors;
 	spin_unlock(&sdev->stat_lock);
 
-	if (printk_ratelimit())
-		printk(KERN_ERR "btrfs: unable to fixup at %llu\n",
-			 (unsigned long long)logical);
+	printk_ratelimited(KERN_ERR "btrfs: unable to fixup (regular) error at "
+				"logical %llu\n", (unsigned long long)logical);
 }
 
 static int scrub_fixup_io(int rw, struct block_device *bdev, sector_t sector,
@@ -382,8 +766,14 @@
 	int ret;
 
 	if (sbio->err) {
+		ret = 0;
 		for (i = 0; i < sbio->count; ++i)
-			scrub_recheck_error(sbio, i);
+			ret |= scrub_recheck_error(sbio, i);
+		if (!ret) {
+			spin_lock(&sdev->stat_lock);
+			++sdev->stat.unverified_errors;
+			spin_unlock(&sdev->stat_lock);
+		}
 
 		sbio->bio->bi_flags &= ~(BIO_POOL_MASK - 1);
 		sbio->bio->bi_flags |= 1 << BIO_UPTODATE;
@@ -396,10 +786,6 @@
 			bi->bv_offset = 0;
 			bi->bv_len = PAGE_SIZE;
 		}
-
-		spin_lock(&sdev->stat_lock);
-		++sdev->stat.read_errors;
-		spin_unlock(&sdev->stat_lock);
 		goto out;
 	}
 	for (i = 0; i < sbio->count; ++i) {
@@ -420,8 +806,14 @@
 			WARN_ON(1);
 		}
 		kunmap_atomic(buffer, KM_USER0);
-		if (ret)
-			scrub_recheck_error(sbio, i);
+		if (ret) {
+			ret = scrub_recheck_error(sbio, i);
+			if (!ret) {
+				spin_lock(&sdev->stat_lock);
+				++sdev->stat.unverified_errors;
+				spin_unlock(&sdev->stat_lock);
+			}
+		}
 	}
 
 out:
@@ -557,57 +949,27 @@
 static int scrub_submit(struct scrub_dev *sdev)
 {
 	struct scrub_bio *sbio;
-	struct bio *bio;
-	int i;
 
 	if (sdev->curr == -1)
 		return 0;
 
 	sbio = sdev->bios[sdev->curr];
-
-	bio = bio_alloc(GFP_NOFS, sbio->count);
-	if (!bio)
-		goto nomem;
-
-	bio->bi_private = sbio;
-	bio->bi_end_io = scrub_bio_end_io;
-	bio->bi_bdev = sdev->dev->bdev;
-	bio->bi_sector = sbio->physical >> 9;
-
-	for (i = 0; i < sbio->count; ++i) {
-		struct page *page;
-		int ret;
-
-		page = alloc_page(GFP_NOFS);
-		if (!page)
-			goto nomem;
-
-		ret = bio_add_page(bio, page, PAGE_SIZE, 0);
-		if (!ret) {
-			__free_page(page);
-			goto nomem;
-		}
-	}
-
 	sbio->err = 0;
 	sdev->curr = -1;
 	atomic_inc(&sdev->in_flight);
 
-	submit_bio(READ, bio);
+	submit_bio(READ, sbio->bio);
 
 	return 0;
-
-nomem:
-	scrub_free_bio(bio);
-
-	return -ENOMEM;
 }
 
 static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len,
-		      u64 physical, u64 flags, u64 gen, u64 mirror_num,
+		      u64 physical, u64 flags, u64 gen, int mirror_num,
 		      u8 *csum, int force)
 {
 	struct scrub_bio *sbio;
+	struct page *page;
+	int ret;
 
 again:
 	/*
@@ -628,12 +990,22 @@
 	}
 	sbio = sdev->bios[sdev->curr];
 	if (sbio->count == 0) {
+		struct bio *bio;
+
 		sbio->physical = physical;
 		sbio->logical = logical;
+		bio = bio_alloc(GFP_NOFS, SCRUB_PAGES_PER_BIO);
+		if (!bio)
+			return -ENOMEM;
+
+		bio->bi_private = sbio;
+		bio->bi_end_io = scrub_bio_end_io;
+		bio->bi_bdev = sdev->dev->bdev;
+		bio->bi_sector = sbio->physical >> 9;
+		sbio->err = 0;
+		sbio->bio = bio;
 	} else if (sbio->physical + sbio->count * PAGE_SIZE != physical ||
 		   sbio->logical + sbio->count * PAGE_SIZE != logical) {
-		int ret;
-
 		ret = scrub_submit(sdev);
 		if (ret)
 			return ret;
@@ -643,6 +1015,20 @@
 	sbio->spag[sbio->count].generation = gen;
 	sbio->spag[sbio->count].have_csum = 0;
 	sbio->spag[sbio->count].mirror_num = mirror_num;
+
+	page = alloc_page(GFP_NOFS);
+	if (!page)
+		return -ENOMEM;
+
+	ret = bio_add_page(sbio->bio, page, PAGE_SIZE, 0);
+	if (!ret) {
+		__free_page(page);
+		ret = scrub_submit(sdev);
+		if (ret)
+			return ret;
+		goto again;
+	}
+
 	if (csum) {
 		sbio->spag[sbio->count].have_csum = 1;
 		memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size);
@@ -701,7 +1087,7 @@
 
 /* scrub extent tries to collect up to 64 kB for each bio */
 static int scrub_extent(struct scrub_dev *sdev, u64 logical, u64 len,
-			u64 physical, u64 flags, u64 gen, u64 mirror_num)
+			u64 physical, u64 flags, u64 gen, int mirror_num)
 {
 	int ret;
 	u8 csum[BTRFS_CSUM_SIZE];
@@ -741,13 +1127,16 @@
 	int slot;
 	int i;
 	u64 nstripes;
-	int start_stripe;
 	struct extent_buffer *l;
 	struct btrfs_key key;
 	u64 physical;
 	u64 logical;
 	u64 generation;
-	u64 mirror_num;
+	int mirror_num;
+	struct reada_control *reada1;
+	struct reada_control *reada2;
+	struct btrfs_key key_start;
+	struct btrfs_key key_end;
 
 	u64 increment = map->stripe_len;
 	u64 offset;
@@ -758,102 +1147,88 @@
 	if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
 		offset = map->stripe_len * num;
 		increment = map->stripe_len * map->num_stripes;
-		mirror_num = 0;
+		mirror_num = 1;
 	} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
 		int factor = map->num_stripes / map->sub_stripes;
 		offset = map->stripe_len * (num / map->sub_stripes);
 		increment = map->stripe_len * factor;
-		mirror_num = num % map->sub_stripes;
+		mirror_num = num % map->sub_stripes + 1;
 	} else if (map->type & BTRFS_BLOCK_GROUP_RAID1) {
 		increment = map->stripe_len;
-		mirror_num = num % map->num_stripes;
+		mirror_num = num % map->num_stripes + 1;
 	} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
 		increment = map->stripe_len;
-		mirror_num = num % map->num_stripes;
+		mirror_num = num % map->num_stripes + 1;
 	} else {
 		increment = map->stripe_len;
-		mirror_num = 0;
+		mirror_num = 1;
 	}
 
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
-	path->reada = 2;
 	path->search_commit_root = 1;
 	path->skip_locking = 1;
 
 	/*
-	 * find all extents for each stripe and just read them to get
-	 * them into the page cache
-	 * FIXME: we can do better. build a more intelligent prefetching
+	 * trigger the readahead for extent tree csum tree and wait for
+	 * completion. During readahead, the scrub is officially paused
+	 * to not hold off transaction commits
 	 */
 	logical = base + offset;
-	physical = map->stripes[num].physical;
-	ret = 0;
-	for (i = 0; i < nstripes; ++i) {
-		key.objectid = logical;
-		key.type = BTRFS_EXTENT_ITEM_KEY;
-		key.offset = (u64)0;
 
-		ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-		if (ret < 0)
-			goto out_noplug;
+	wait_event(sdev->list_wait,
+		   atomic_read(&sdev->in_flight) == 0);
+	atomic_inc(&fs_info->scrubs_paused);
+	wake_up(&fs_info->scrub_pause_wait);
 
-		/*
-		 * we might miss half an extent here, but that doesn't matter,
-		 * as it's only the prefetch
-		 */
-		while (1) {
-			l = path->nodes[0];
-			slot = path->slots[0];
-			if (slot >= btrfs_header_nritems(l)) {
-				ret = btrfs_next_leaf(root, path);
-				if (ret == 0)
-					continue;
-				if (ret < 0)
-					goto out_noplug;
+	/* FIXME it might be better to start readahead at commit root */
+	key_start.objectid = logical;
+	key_start.type = BTRFS_EXTENT_ITEM_KEY;
+	key_start.offset = (u64)0;
+	key_end.objectid = base + offset + nstripes * increment;
+	key_end.type = BTRFS_EXTENT_ITEM_KEY;
+	key_end.offset = (u64)0;
+	reada1 = btrfs_reada_add(root, &key_start, &key_end);
 
-				break;
-			}
-			btrfs_item_key_to_cpu(l, &key, slot);
+	key_start.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
+	key_start.type = BTRFS_EXTENT_CSUM_KEY;
+	key_start.offset = logical;
+	key_end.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
+	key_end.type = BTRFS_EXTENT_CSUM_KEY;
+	key_end.offset = base + offset + nstripes * increment;
+	reada2 = btrfs_reada_add(csum_root, &key_start, &key_end);
 
-			if (key.objectid >= logical + map->stripe_len)
-				break;
+	if (!IS_ERR(reada1))
+		btrfs_reada_wait(reada1);
+	if (!IS_ERR(reada2))
+		btrfs_reada_wait(reada2);
 
-			path->slots[0]++;
-		}
-		btrfs_release_path(path);
-		logical += increment;
-		physical += map->stripe_len;
-		cond_resched();
+	mutex_lock(&fs_info->scrub_lock);
+	while (atomic_read(&fs_info->scrub_pause_req)) {
+		mutex_unlock(&fs_info->scrub_lock);
+		wait_event(fs_info->scrub_pause_wait,
+		   atomic_read(&fs_info->scrub_pause_req) == 0);
+		mutex_lock(&fs_info->scrub_lock);
 	}
+	atomic_dec(&fs_info->scrubs_paused);
+	mutex_unlock(&fs_info->scrub_lock);
+	wake_up(&fs_info->scrub_pause_wait);
 
 	/*
 	 * collect all data csums for the stripe to avoid seeking during
 	 * the scrub. This might currently (crc32) end up to be about 1MB
 	 */
-	start_stripe = 0;
 	blk_start_plug(&plug);
-again:
-	logical = base + offset + start_stripe * increment;
-	for (i = start_stripe; i < nstripes; ++i) {
-		ret = btrfs_lookup_csums_range(csum_root, logical,
-					       logical + map->stripe_len - 1,
-					       &sdev->csum_list, 1);
-		if (ret)
-			goto out;
 
-		logical += increment;
-		cond_resched();
-	}
 	/*
 	 * now find all extents for each stripe and scrub them
 	 */
-	logical = base + offset + start_stripe * increment;
-	physical = map->stripes[num].physical + start_stripe * map->stripe_len;
+	logical = base + offset;
+	physical = map->stripes[num].physical;
 	ret = 0;
-	for (i = start_stripe; i < nstripes; ++i) {
+	for (i = 0; i < nstripes; ++i) {
 		/*
 		 * canceled?
 		 */
@@ -882,11 +1257,14 @@
 			atomic_dec(&fs_info->scrubs_paused);
 			mutex_unlock(&fs_info->scrub_lock);
 			wake_up(&fs_info->scrub_pause_wait);
-			scrub_free_csums(sdev);
-			start_stripe = i;
-			goto again;
 		}
 
+		ret = btrfs_lookup_csums_range(csum_root, logical,
+					       logical + map->stripe_len - 1,
+					       &sdev->csum_list, 1);
+		if (ret)
+			goto out;
+
 		key.objectid = logical;
 		key.type = BTRFS_EXTENT_ITEM_KEY;
 		key.offset = (u64)0;
@@ -982,7 +1360,6 @@
 
 out:
 	blk_finish_plug(&plug);
-out_noplug:
 	btrfs_free_path(path);
 	return ret < 0 ? ret : 0;
 }
@@ -1253,10 +1630,11 @@
 		ret = scrub_enumerate_chunks(sdev, start, end);
 
 	wait_event(sdev->list_wait, atomic_read(&sdev->in_flight) == 0);
-
 	atomic_dec(&fs_info->scrubs_running);
 	wake_up(&fs_info->scrub_pause_wait);
 
+	wait_event(sdev->list_wait, atomic_read(&sdev->fixup_cnt) == 0);
+
 	if (progress)
 		memcpy(progress, &sdev->stat, sizeof(*progress));
 
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 15634d4..e28ad4b 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -40,6 +40,7 @@
 #include <linux/magic.h>
 #include <linux/slab.h>
 #include <linux/cleancache.h>
+#include <linux/mnt_namespace.h>
 #include "compat.h"
 #include "delayed-inode.h"
 #include "ctree.h"
@@ -58,6 +59,7 @@
 #include <trace/events/btrfs.h>
 
 static const struct super_operations btrfs_super_ops;
+static struct file_system_type btrfs_fs_type;
 
 static const char *btrfs_decode_error(struct btrfs_fs_info *fs_info, int errno,
 				      char nbuf[16])
@@ -162,7 +164,7 @@
 	Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard,
 	Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed,
 	Opt_enospc_debug, Opt_subvolrootid, Opt_defrag,
-	Opt_inode_cache, Opt_err,
+	Opt_inode_cache, Opt_no_space_cache, Opt_recovery, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -195,6 +197,8 @@
 	{Opt_subvolrootid, "subvolrootid=%d"},
 	{Opt_defrag, "autodefrag"},
 	{Opt_inode_cache, "inode_cache"},
+	{Opt_no_space_cache, "nospace_cache"},
+	{Opt_recovery, "recovery"},
 	{Opt_err, NULL},
 };
 
@@ -206,14 +210,19 @@
 {
 	struct btrfs_fs_info *info = root->fs_info;
 	substring_t args[MAX_OPT_ARGS];
-	char *p, *num, *orig;
+	char *p, *num, *orig = NULL;
+	u64 cache_gen;
 	int intarg;
 	int ret = 0;
 	char *compress_type;
 	bool compress_force = false;
 
+	cache_gen = btrfs_super_cache_generation(root->fs_info->super_copy);
+	if (cache_gen)
+		btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+
 	if (!options)
-		return 0;
+		goto out;
 
 	/*
 	 * strsep changes the string, duplicate it because parse_options
@@ -360,9 +369,12 @@
 			btrfs_set_opt(info->mount_opt, DISCARD);
 			break;
 		case Opt_space_cache:
-			printk(KERN_INFO "btrfs: enabling disk space caching\n");
 			btrfs_set_opt(info->mount_opt, SPACE_CACHE);
 			break;
+		case Opt_no_space_cache:
+			printk(KERN_INFO "btrfs: disabling disk space caching\n");
+			btrfs_clear_opt(info->mount_opt, SPACE_CACHE);
+			break;
 		case Opt_inode_cache:
 			printk(KERN_INFO "btrfs: enabling inode map caching\n");
 			btrfs_set_opt(info->mount_opt, INODE_MAP_CACHE);
@@ -381,6 +393,10 @@
 			printk(KERN_INFO "btrfs: enabling auto defrag");
 			btrfs_set_opt(info->mount_opt, AUTO_DEFRAG);
 			break;
+		case Opt_recovery:
+			printk(KERN_INFO "btrfs: enabling auto recovery");
+			btrfs_set_opt(info->mount_opt, RECOVERY);
+			break;
 		case Opt_err:
 			printk(KERN_INFO "btrfs: unrecognized mount option "
 			       "'%s'\n", p);
@@ -391,6 +407,8 @@
 		}
 	}
 out:
+	if (!ret && btrfs_test_opt(root, SPACE_CACHE))
+		printk(KERN_INFO "btrfs: disk space caching is enabled\n");
 	kfree(orig);
 	return ret;
 }
@@ -406,12 +424,12 @@
 		u64 *subvol_rootid, struct btrfs_fs_devices **fs_devices)
 {
 	substring_t args[MAX_OPT_ARGS];
-	char *opts, *orig, *p;
+	char *device_name, *opts, *orig, *p;
 	int error = 0;
 	int intarg;
 
 	if (!options)
-		goto out;
+		return 0;
 
 	/*
 	 * strsep changes the string, duplicate it because parse_options
@@ -430,6 +448,7 @@
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_subvol:
+			kfree(*subvol_name);
 			*subvol_name = match_strdup(&args[0]);
 			break;
 		case Opt_subvolid:
@@ -457,29 +476,24 @@
 			}
 			break;
 		case Opt_device:
-			error = btrfs_scan_one_device(match_strdup(&args[0]),
+			device_name = match_strdup(&args[0]);
+			if (!device_name) {
+				error = -ENOMEM;
+				goto out;
+			}
+			error = btrfs_scan_one_device(device_name,
 					flags, holder, fs_devices);
+			kfree(device_name);
 			if (error)
-				goto out_free_opts;
+				goto out;
 			break;
 		default:
 			break;
 		}
 	}
 
- out_free_opts:
+out:
 	kfree(orig);
- out:
-	/*
-	 * If no subvolume name is specified we use the default one.  Allocate
-	 * a copy of the string "." here so that code later in the
-	 * mount path doesn't care if it's the default volume or another one.
-	 */
-	if (!*subvol_name) {
-		*subvol_name = kstrdup(".", GFP_KERNEL);
-		if (!*subvol_name)
-			return -ENOMEM;
-	}
 	return error;
 }
 
@@ -492,7 +506,6 @@
 	struct btrfs_path *path;
 	struct btrfs_key location;
 	struct inode *inode;
-	struct dentry *dentry;
 	u64 dir_id;
 	int new = 0;
 
@@ -517,7 +530,7 @@
 	 * will mount by default if we haven't been given a specific subvolume
 	 * to mount.
 	 */
-	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
+	dir_id = btrfs_super_root_dir(root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
 	if (IS_ERR(di)) {
 		btrfs_free_path(path);
@@ -566,29 +579,7 @@
 		return dget(sb->s_root);
 	}
 
-	if (new) {
-		const struct qstr name = { .name = "/", .len = 1 };
-
-		/*
-		 * New inode, we need to make the dentry a sibling of s_root so
-		 * everything gets cleaned up properly on unmount.
-		 */
-		dentry = d_alloc(sb->s_root, &name);
-		if (!dentry) {
-			iput(inode);
-			return ERR_PTR(-ENOMEM);
-		}
-		d_splice_alias(inode, dentry);
-	} else {
-		/*
-		 * We found the inode in cache, just find a dentry for it and
-		 * put the reference to the inode we just got.
-		 */
-		dentry = d_find_alias(inode);
-		iput(inode);
-	}
-
-	return dentry;
+	return d_obtain_alias(inode);
 }
 
 static int btrfs_fill_super(struct super_block *sb,
@@ -719,6 +710,8 @@
 		seq_puts(seq, ",noacl");
 	if (btrfs_test_opt(root, SPACE_CACHE))
 		seq_puts(seq, ",space_cache");
+	else
+		seq_puts(seq, ",nospace_cache");
 	if (btrfs_test_opt(root, CLEAR_CACHE))
 		seq_puts(seq, ",clear_cache");
 	if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
@@ -753,6 +746,111 @@
 	return set_anon_super(s, data);
 }
 
+/*
+ * subvolumes are identified by ino 256
+ */
+static inline int is_subvolume_inode(struct inode *inode)
+{
+	if (inode && inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+		return 1;
+	return 0;
+}
+
+/*
+ * This will strip out the subvol=%s argument for an argument string and add
+ * subvolid=0 to make sure we get the actual tree root for path walking to the
+ * subvol we want.
+ */
+static char *setup_root_args(char *args)
+{
+	unsigned copied = 0;
+	unsigned len = strlen(args) + 2;
+	char *pos;
+	char *ret;
+
+	/*
+	 * We need the same args as before, but minus
+	 *
+	 * subvol=a
+	 *
+	 * and add
+	 *
+	 * subvolid=0
+	 *
+	 * which is a difference of 2 characters, so we allocate strlen(args) +
+	 * 2 characters.
+	 */
+	ret = kzalloc(len * sizeof(char), GFP_NOFS);
+	if (!ret)
+		return NULL;
+	pos = strstr(args, "subvol=");
+
+	/* This shouldn't happen, but just in case.. */
+	if (!pos) {
+		kfree(ret);
+		return NULL;
+	}
+
+	/*
+	 * The subvol=<> arg is not at the front of the string, copy everybody
+	 * up to that into ret.
+	 */
+	if (pos != args) {
+		*pos = '\0';
+		strcpy(ret, args);
+		copied += strlen(args);
+		pos++;
+	}
+
+	strncpy(ret + copied, "subvolid=0", len - copied);
+
+	/* Length of subvolid=0 */
+	copied += 10;
+
+	/*
+	 * If there is no , after the subvol= option then we know there's no
+	 * other options and we can just return.
+	 */
+	pos = strchr(pos, ',');
+	if (!pos)
+		return ret;
+
+	/* Copy the rest of the arguments into our buffer */
+	strncpy(ret + copied, pos, len - copied);
+	copied += strlen(pos);
+
+	return ret;
+}
+
+static struct dentry *mount_subvol(const char *subvol_name, int flags,
+				   const char *device_name, char *data)
+{
+	struct dentry *root;
+	struct vfsmount *mnt;
+	char *newargs;
+
+	newargs = setup_root_args(data);
+	if (!newargs)
+		return ERR_PTR(-ENOMEM);
+	mnt = vfs_kern_mount(&btrfs_fs_type, flags, device_name,
+			     newargs);
+	kfree(newargs);
+	if (IS_ERR(mnt))
+		return ERR_CAST(mnt);
+
+	root = mount_subtree(mnt, subvol_name);
+
+	if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) {
+		struct super_block *s = root->d_sb;
+		dput(root);
+		root = ERR_PTR(-EINVAL);
+		deactivate_locked_super(s);
+		printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n",
+				subvol_name);
+	}
+
+	return root;
+}
 
 /*
  * Find a superblock for the given device / mount point.
@@ -767,7 +865,6 @@
 	struct super_block *s;
 	struct dentry *root;
 	struct btrfs_fs_devices *fs_devices = NULL;
-	struct btrfs_root *tree_root = NULL;
 	struct btrfs_fs_info *fs_info = NULL;
 	fmode_t mode = FMODE_READ;
 	char *subvol_name = NULL;
@@ -781,21 +878,20 @@
 	error = btrfs_parse_early_options(data, mode, fs_type,
 					  &subvol_name, &subvol_objectid,
 					  &subvol_rootid, &fs_devices);
-	if (error)
+	if (error) {
+		kfree(subvol_name);
 		return ERR_PTR(error);
+	}
+
+	if (subvol_name) {
+		root = mount_subvol(subvol_name, flags, device_name, data);
+		kfree(subvol_name);
+		return root;
+	}
 
 	error = btrfs_scan_one_device(device_name, mode, fs_type, &fs_devices);
 	if (error)
-		goto error_free_subvol_name;
-
-	error = btrfs_open_devices(fs_devices, mode, fs_type);
-	if (error)
-		goto error_free_subvol_name;
-
-	if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
-		error = -EACCES;
-		goto error_close_devices;
-	}
+		return ERR_PTR(error);
 
 	/*
 	 * Setup a dummy root and fs_info for test/set super.  This is because
@@ -804,19 +900,40 @@
 	 * then open_ctree will properly initialize everything later.
 	 */
 	fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
-	tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
-	if (!fs_info || !tree_root) {
+	if (!fs_info)
+		return ERR_PTR(-ENOMEM);
+
+	fs_info->tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	if (!fs_info->tree_root) {
 		error = -ENOMEM;
+		goto error_fs_info;
+	}
+	fs_info->tree_root->fs_info = fs_info;
+	fs_info->fs_devices = fs_devices;
+
+	fs_info->super_copy = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
+	fs_info->super_for_commit = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
+	if (!fs_info->super_copy || !fs_info->super_for_commit) {
+		error = -ENOMEM;
+		goto error_fs_info;
+	}
+
+	error = btrfs_open_devices(fs_devices, mode, fs_type);
+	if (error)
+		goto error_fs_info;
+
+	if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
+		error = -EACCES;
 		goto error_close_devices;
 	}
-	fs_info->tree_root = tree_root;
-	fs_info->fs_devices = fs_devices;
-	tree_root->fs_info = fs_info;
 
 	bdev = fs_devices->latest_bdev;
-	s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
-	if (IS_ERR(s))
-		goto error_s;
+	s = sget(fs_type, btrfs_test_super, btrfs_set_super,
+		 fs_info->tree_root);
+	if (IS_ERR(s)) {
+		error = PTR_ERR(s);
+		goto error_close_devices;
+	}
 
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
@@ -826,75 +943,35 @@
 		}
 
 		btrfs_close_devices(fs_devices);
-		kfree(fs_info);
-		kfree(tree_root);
+		free_fs_info(fs_info);
 	} else {
 		char b[BDEVNAME_SIZE];
 
 		s->s_flags = flags | MS_NOSEC;
 		strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
+		btrfs_sb(s)->fs_info->bdev_holder = fs_type;
 		error = btrfs_fill_super(s, fs_devices, data,
 					 flags & MS_SILENT ? 1 : 0);
 		if (error) {
 			deactivate_locked_super(s);
-			goto error_free_subvol_name;
+			return ERR_PTR(error);
 		}
 
-		btrfs_sb(s)->fs_info->bdev_holder = fs_type;
 		s->s_flags |= MS_ACTIVE;
 	}
 
-	/* if they gave us a subvolume name bind mount into that */
-	if (strcmp(subvol_name, ".")) {
-		struct dentry *new_root;
-
-		root = get_default_root(s, subvol_rootid);
-		if (IS_ERR(root)) {
-			error = PTR_ERR(root);
-			deactivate_locked_super(s);
-			goto error_free_subvol_name;
-		}
-
-		mutex_lock(&root->d_inode->i_mutex);
-		new_root = lookup_one_len(subvol_name, root,
-				      strlen(subvol_name));
-		mutex_unlock(&root->d_inode->i_mutex);
-
-		if (IS_ERR(new_root)) {
-			dput(root);
-			deactivate_locked_super(s);
-			error = PTR_ERR(new_root);
-			goto error_free_subvol_name;
-		}
-		if (!new_root->d_inode) {
-			dput(root);
-			dput(new_root);
-			deactivate_locked_super(s);
-			error = -ENXIO;
-			goto error_free_subvol_name;
-		}
-		dput(root);
-		root = new_root;
-	} else {
-		root = get_default_root(s, subvol_objectid);
-		if (IS_ERR(root)) {
-			error = PTR_ERR(root);
-			deactivate_locked_super(s);
-			goto error_free_subvol_name;
-		}
+	root = get_default_root(s, subvol_objectid);
+	if (IS_ERR(root)) {
+		deactivate_locked_super(s);
+		return root;
 	}
 
-	kfree(subvol_name);
 	return root;
 
-error_s:
-	error = PTR_ERR(s);
 error_close_devices:
 	btrfs_close_devices(fs_devices);
-	kfree(fs_info);
-	kfree(tree_root);
-error_free_subvol_name:
-	kfree(subvol_name);
+error_fs_info:
+	free_fs_info(fs_info);
 	return ERR_PTR(error);
 }
 
@@ -919,7 +996,7 @@
 		if (root->fs_info->fs_devices->rw_devices == 0)
 			return -EACCES;
 
-		if (btrfs_super_log_root(&root->fs_info->super_copy) != 0)
+		if (btrfs_super_log_root(root->fs_info->super_copy) != 0)
 			return -EINVAL;
 
 		ret = btrfs_cleanup_fs_roots(root->fs_info);
@@ -980,7 +1057,7 @@
 	int i = 0, nr_devices;
 	int ret;
 
-	nr_devices = fs_info->fs_devices->rw_devices;
+	nr_devices = fs_info->fs_devices->open_devices;
 	BUG_ON(!nr_devices);
 
 	devices_info = kmalloc(sizeof(*devices_info) * nr_devices,
@@ -1002,8 +1079,8 @@
 	else
 		min_stripe_size = BTRFS_STRIPE_LEN;
 
-	list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) {
-		if (!device->in_fs_metadata)
+	list_for_each_entry(device, &fs_devices->devices, dev_list) {
+		if (!device->in_fs_metadata || !device->bdev)
 			continue;
 
 		avail_space = device->total_bytes - device->bytes_used;
@@ -1085,7 +1162,7 @@
 static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct btrfs_root *root = btrfs_sb(dentry->d_sb);
-	struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+	struct btrfs_super_block *disk_super = root->fs_info->super_copy;
 	struct list_head *head = &root->fs_info->space_info;
 	struct btrfs_space_info *found;
 	u64 total_used = 0;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index e24b796..81376d9 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -55,6 +55,7 @@
 	struct btrfs_transaction *cur_trans;
 
 	spin_lock(&root->fs_info->trans_lock);
+loop:
 	if (root->fs_info->trans_no_join) {
 		if (!nofail) {
 			spin_unlock(&root->fs_info->trans_lock);
@@ -75,16 +76,18 @@
 	cur_trans = kmem_cache_alloc(btrfs_transaction_cachep, GFP_NOFS);
 	if (!cur_trans)
 		return -ENOMEM;
+
 	spin_lock(&root->fs_info->trans_lock);
 	if (root->fs_info->running_transaction) {
+		/*
+		 * someone started a transaction after we unlocked.  Make sure
+		 * to redo the trans_no_join checks above
+		 */
 		kmem_cache_free(btrfs_transaction_cachep, cur_trans);
 		cur_trans = root->fs_info->running_transaction;
-		atomic_inc(&cur_trans->use_count);
-		atomic_inc(&cur_trans->num_writers);
-		cur_trans->num_joined++;
-		spin_unlock(&root->fs_info->trans_lock);
-		return 0;
+		goto loop;
 	}
+
 	atomic_set(&cur_trans->num_writers, 1);
 	cur_trans->num_joined = 0;
 	init_waitqueue_head(&cur_trans->writer_wait);
@@ -275,7 +278,7 @@
 	 */
 	if (num_items > 0 && root != root->fs_info->chunk_root) {
 		num_bytes = btrfs_calc_trans_metadata_size(root, num_items);
-		ret = btrfs_block_rsv_add(NULL, root,
+		ret = btrfs_block_rsv_add(root,
 					  &root->fs_info->trans_block_rsv,
 					  num_bytes);
 		if (ret)
@@ -418,8 +421,8 @@
 				  struct btrfs_root *root)
 {
 	int ret;
-	ret = btrfs_block_rsv_check(trans, root,
-				    &root->fs_info->global_block_rsv, 0, 5);
+
+	ret = btrfs_block_rsv_check(root, &root->fs_info->global_block_rsv, 5);
 	return ret ? 1 : 0;
 }
 
@@ -427,17 +430,26 @@
 				 struct btrfs_root *root)
 {
 	struct btrfs_transaction *cur_trans = trans->transaction;
+	struct btrfs_block_rsv *rsv = trans->block_rsv;
 	int updates;
 
 	smp_mb();
 	if (cur_trans->blocked || cur_trans->delayed_refs.flushing)
 		return 1;
 
+	/*
+	 * We need to do this in case we're deleting csums so the global block
+	 * rsv get's used instead of the csum block rsv.
+	 */
+	trans->block_rsv = NULL;
+
 	updates = trans->delayed_ref_updates;
 	trans->delayed_ref_updates = 0;
 	if (updates)
 		btrfs_run_delayed_refs(trans, root, updates);
 
+	trans->block_rsv = rsv;
+
 	return should_end_transaction(trans, root);
 }
 
@@ -453,6 +465,8 @@
 		return 0;
 	}
 
+	btrfs_trans_release_metadata(trans, root);
+	trans->block_rsv = NULL;
 	while (count < 4) {
 		unsigned long cur = trans->delayed_ref_updates;
 		trans->delayed_ref_updates = 0;
@@ -473,8 +487,6 @@
 		count++;
 	}
 
-	btrfs_trans_release_metadata(trans, root);
-
 	if (lock && !atomic_read(&root->fs_info->open_ioctl_trans) &&
 	    should_end_transaction(trans, root)) {
 		trans->transaction->blocked = 1;
@@ -562,50 +574,21 @@
 int btrfs_write_marked_extents(struct btrfs_root *root,
 			       struct extent_io_tree *dirty_pages, int mark)
 {
-	int ret;
 	int err = 0;
 	int werr = 0;
-	struct page *page;
-	struct inode *btree_inode = root->fs_info->btree_inode;
+	struct address_space *mapping = root->fs_info->btree_inode->i_mapping;
 	u64 start = 0;
 	u64 end;
-	unsigned long index;
 
-	while (1) {
-		ret = find_first_extent_bit(dirty_pages, start, &start, &end,
-					    mark);
-		if (ret)
-			break;
-		while (start <= end) {
-			cond_resched();
-
-			index = start >> PAGE_CACHE_SHIFT;
-			start = (u64)(index + 1) << PAGE_CACHE_SHIFT;
-			page = find_get_page(btree_inode->i_mapping, index);
-			if (!page)
-				continue;
-
-			btree_lock_page_hook(page);
-			if (!page->mapping) {
-				unlock_page(page);
-				page_cache_release(page);
-				continue;
-			}
-
-			if (PageWriteback(page)) {
-				if (PageDirty(page))
-					wait_on_page_writeback(page);
-				else {
-					unlock_page(page);
-					page_cache_release(page);
-					continue;
-				}
-			}
-			err = write_one_page(page, 0);
-			if (err)
-				werr = err;
-			page_cache_release(page);
-		}
+	while (!find_first_extent_bit(dirty_pages, start, &start, &end,
+				      mark)) {
+		convert_extent_bit(dirty_pages, start, end, EXTENT_NEED_WAIT, mark,
+				   GFP_NOFS);
+		err = filemap_fdatawrite_range(mapping, start, end);
+		if (err)
+			werr = err;
+		cond_resched();
+		start = end + 1;
 	}
 	if (err)
 		werr = err;
@@ -621,39 +604,20 @@
 int btrfs_wait_marked_extents(struct btrfs_root *root,
 			      struct extent_io_tree *dirty_pages, int mark)
 {
-	int ret;
 	int err = 0;
 	int werr = 0;
-	struct page *page;
-	struct inode *btree_inode = root->fs_info->btree_inode;
+	struct address_space *mapping = root->fs_info->btree_inode->i_mapping;
 	u64 start = 0;
 	u64 end;
-	unsigned long index;
 
-	while (1) {
-		ret = find_first_extent_bit(dirty_pages, start, &start, &end,
-					    mark);
-		if (ret)
-			break;
-
-		clear_extent_bits(dirty_pages, start, end, mark, GFP_NOFS);
-		while (start <= end) {
-			index = start >> PAGE_CACHE_SHIFT;
-			start = (u64)(index + 1) << PAGE_CACHE_SHIFT;
-			page = find_get_page(btree_inode->i_mapping, index);
-			if (!page)
-				continue;
-			if (PageDirty(page)) {
-				btree_lock_page_hook(page);
-				wait_on_page_writeback(page);
-				err = write_one_page(page, 0);
-				if (err)
-					werr = err;
-			}
-			wait_on_page_writeback(page);
-			page_cache_release(page);
-			cond_resched();
-		}
+	while (!find_first_extent_bit(dirty_pages, start, &start, &end,
+				      EXTENT_NEED_WAIT)) {
+		clear_extent_bits(dirty_pages, start, end, EXTENT_NEED_WAIT, GFP_NOFS);
+		err = filemap_fdatawait_range(mapping, start, end);
+		if (err)
+			werr = err;
+		cond_resched();
+		start = end + 1;
 	}
 	if (err)
 		werr = err;
@@ -673,7 +637,12 @@
 
 	ret = btrfs_write_marked_extents(root, dirty_pages, mark);
 	ret2 = btrfs_wait_marked_extents(root, dirty_pages, mark);
-	return ret || ret2;
+
+	if (ret)
+		return ret;
+	if (ret2)
+		return ret2;
+	return 0;
 }
 
 int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
@@ -816,6 +785,10 @@
 
 			btrfs_save_ino_cache(root, trans);
 
+			/* see comments in should_cow_block() */
+			root->force_cow = 0;
+			smp_wmb();
+
 			if (root->commit_root != root->node) {
 				mutex_lock(&root->fs_commit_mutex);
 				switch_commit_root(root);
@@ -911,11 +884,10 @@
 	}
 
 	btrfs_reloc_pre_snapshot(trans, pending, &to_reserve);
-	btrfs_orphan_pre_snapshot(trans, pending, &to_reserve);
 
 	if (to_reserve > 0) {
-		ret = btrfs_block_rsv_add(trans, root, &pending->block_rsv,
-					  to_reserve);
+		ret = btrfs_block_rsv_add_noflush(root, &pending->block_rsv,
+						  to_reserve);
 		if (ret) {
 			pending->error = ret;
 			goto fail;
@@ -979,6 +951,10 @@
 	btrfs_tree_unlock(old);
 	free_extent_buffer(old);
 
+	/* see comments in should_cow_block() */
+	root->force_cow = 1;
+	smp_wmb();
+
 	btrfs_set_root_node(new_root_item, tmp);
 	/* record when the snapshot was created in key.offset */
 	key.offset = trans->transid;
@@ -1002,7 +978,6 @@
 	BUG_ON(IS_ERR(pending->snap));
 
 	btrfs_reloc_post_snapshot(trans, pending);
-	btrfs_orphan_post_snapshot(trans, pending);
 fail:
 	kfree(new_root_item);
 	trans->block_rsv = rsv;
@@ -1032,7 +1007,7 @@
 	struct btrfs_root_item *root_item;
 	struct btrfs_super_block *super;
 
-	super = &root->fs_info->super_copy;
+	super = root->fs_info->super_copy;
 
 	root_item = &root->fs_info->chunk_root->root_item;
 	super->chunk_root = root_item->bytenr;
@@ -1043,7 +1018,7 @@
 	super->root = root_item->bytenr;
 	super->generation = root_item->generation;
 	super->root_level = root_item->level;
-	if (super->cache_generation != 0 || btrfs_test_opt(root, SPACE_CACHE))
+	if (btrfs_test_opt(root, SPACE_CACHE))
 		super->cache_generation = root_item->generation;
 }
 
@@ -1168,14 +1143,15 @@
 
 	btrfs_run_ordered_operations(root, 0);
 
+	btrfs_trans_release_metadata(trans, root);
+	trans->block_rsv = NULL;
+
 	/* make a pass through all the delayed refs we have so far
 	 * any runnings procs may add more while we are here
 	 */
 	ret = btrfs_run_delayed_refs(trans, root, 0);
 	BUG_ON(ret);
 
-	btrfs_trans_release_metadata(trans, root);
-
 	cur_trans = trans->transaction;
 	/*
 	 * set the flushing flag so procs in this transaction have to
@@ -1341,12 +1317,12 @@
 	update_super_roots(root);
 
 	if (!root->fs_info->log_root_recovering) {
-		btrfs_set_super_log_root(&root->fs_info->super_copy, 0);
-		btrfs_set_super_log_root_level(&root->fs_info->super_copy, 0);
+		btrfs_set_super_log_root(root->fs_info->super_copy, 0);
+		btrfs_set_super_log_root_level(root->fs_info->super_copy, 0);
 	}
 
-	memcpy(&root->fs_info->super_for_commit, &root->fs_info->super_copy,
-	       sizeof(root->fs_info->super_copy));
+	memcpy(root->fs_info->super_for_commit, root->fs_info->super_copy,
+	       sizeof(*root->fs_info->super_copy));
 
 	trans->transaction->blocked = 0;
 	spin_lock(&root->fs_info->trans_lock);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 0618aa3..3568374 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -276,8 +276,9 @@
 			      struct walk_control *wc, u64 gen)
 {
 	if (wc->pin)
-		btrfs_pin_extent(log->fs_info->extent_root,
-				 eb->start, eb->len, 0);
+		btrfs_pin_extent_for_log_replay(wc->trans,
+						log->fs_info->extent_root,
+						eb->start, eb->len);
 
 	if (btrfs_buffer_uptodate(eb, gen)) {
 		if (wc->write)
@@ -1760,7 +1761,7 @@
 
 				WARN_ON(root_owner !=
 					BTRFS_TREE_LOG_OBJECTID);
-				ret = btrfs_free_reserved_extent(root,
+				ret = btrfs_free_and_pin_reserved_extent(root,
 							 bytenr, blocksize);
 				BUG_ON(ret);
 			}
@@ -1828,7 +1829,7 @@
 				btrfs_tree_unlock(next);
 
 				WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
-				ret = btrfs_free_reserved_extent(root,
+				ret = btrfs_free_and_pin_reserved_extent(root,
 						path->nodes[*level]->start,
 						path->nodes[*level]->len);
 				BUG_ON(ret);
@@ -1897,7 +1898,7 @@
 
 			WARN_ON(log->root_key.objectid !=
 				BTRFS_TREE_LOG_OBJECTID);
-			ret = btrfs_free_reserved_extent(log, next->start,
+			ret = btrfs_free_and_pin_reserved_extent(log, next->start,
 							 next->len);
 			BUG_ON(ret);
 		}
@@ -2013,10 +2014,10 @@
 	/* wait for previous tree log sync to complete */
 	if (atomic_read(&root->log_commit[(index1 + 1) % 2]))
 		wait_log_commit(trans, root, root->log_transid - 1);
-
 	while (1) {
 		unsigned long batch = root->log_batch;
-		if (root->log_multiple_pids) {
+		/* when we're on an ssd, just kick the log commit out */
+		if (!btrfs_test_opt(root, SSD) && root->log_multiple_pids) {
 			mutex_unlock(&root->log_mutex);
 			schedule_timeout_uninterruptible(1);
 			mutex_lock(&root->log_mutex);
@@ -2117,9 +2118,9 @@
 	BUG_ON(ret);
 	btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark);
 
-	btrfs_set_super_log_root(&root->fs_info->super_for_commit,
+	btrfs_set_super_log_root(root->fs_info->super_for_commit,
 				log_root_tree->node->start);
-	btrfs_set_super_log_root_level(&root->fs_info->super_for_commit,
+	btrfs_set_super_log_root_level(root->fs_info->super_for_commit,
 				btrfs_header_level(log_root_tree->node));
 
 	log_root_tree->log_batch = 0;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index f2a4cc7..c37433d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -366,6 +366,14 @@
 		}
 		INIT_LIST_HEAD(&device->dev_alloc_list);
 
+		/* init readahead state */
+		spin_lock_init(&device->reada_lock);
+		device->reada_curr_zone = NULL;
+		atomic_set(&device->reada_in_flight, 0);
+		device->reada_next = 0;
+		INIT_RADIX_TREE(&device->reada_zones, GFP_NOFS & ~__GFP_WAIT);
+		INIT_RADIX_TREE(&device->reada_extents, GFP_NOFS & ~__GFP_WAIT);
+
 		mutex_lock(&fs_devices->device_list_mutex);
 		list_add_rcu(&device->dev_list, &fs_devices->devices);
 		mutex_unlock(&fs_devices->device_list_mutex);
@@ -597,10 +605,8 @@
 		set_blocksize(bdev, 4096);
 
 		bh = btrfs_read_dev_super(bdev);
-		if (!bh) {
-			ret = -EINVAL;
+		if (!bh)
 			goto error_close;
-		}
 
 		disk_super = (struct btrfs_super_block *)bh->b_data;
 		devid = btrfs_stack_device_id(&disk_super->dev_item);
@@ -655,7 +661,7 @@
 		continue;
 	}
 	if (fs_devices->open_devices == 0) {
-		ret = -EIO;
+		ret = -EINVAL;
 		goto out;
 	}
 	fs_devices->seeding = seeding;
@@ -993,7 +999,7 @@
 	key.objectid = device->devid;
 	key.offset = start;
 	key.type = BTRFS_DEV_EXTENT_KEY;
-
+again:
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
 	if (ret > 0) {
 		ret = btrfs_previous_item(root, path, key.objectid,
@@ -1006,6 +1012,9 @@
 					struct btrfs_dev_extent);
 		BUG_ON(found_key.offset > start || found_key.offset +
 		       btrfs_dev_extent_length(leaf, extent) < start);
+		key = found_key;
+		btrfs_release_path(path);
+		goto again;
 	} else if (ret == 0) {
 		leaf = path->nodes[0];
 		extent = btrfs_item_ptr(leaf, path->slots[0],
@@ -1013,8 +1022,13 @@
 	}
 	BUG_ON(ret);
 
-	if (device->bytes_used > 0)
-		device->bytes_used -= btrfs_dev_extent_length(leaf, extent);
+	if (device->bytes_used > 0) {
+		u64 len = btrfs_dev_extent_length(leaf, extent);
+		device->bytes_used -= len;
+		spin_lock(&root->fs_info->free_chunk_lock);
+		root->fs_info->free_chunk_space += len;
+		spin_unlock(&root->fs_info->free_chunk_lock);
+	}
 	ret = btrfs_del_item(trans, root, path);
 
 out:
@@ -1356,6 +1370,11 @@
 	if (ret)
 		goto error_undo;
 
+	spin_lock(&root->fs_info->free_chunk_lock);
+	root->fs_info->free_chunk_space = device->total_bytes -
+		device->bytes_used;
+	spin_unlock(&root->fs_info->free_chunk_lock);
+
 	device->in_fs_metadata = 0;
 	btrfs_scrub_cancel_dev(root, device);
 
@@ -1387,8 +1406,8 @@
 	call_rcu(&device->rcu, free_device);
 	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 
-	num_devices = btrfs_super_num_devices(&root->fs_info->super_copy) - 1;
-	btrfs_set_super_num_devices(&root->fs_info->super_copy, num_devices);
+	num_devices = btrfs_super_num_devices(root->fs_info->super_copy) - 1;
+	btrfs_set_super_num_devices(root->fs_info->super_copy, num_devices);
 
 	if (cur_devices->open_devices == 0) {
 		struct btrfs_fs_devices *fs_devices;
@@ -1450,7 +1469,7 @@
 	struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
 	struct btrfs_fs_devices *old_devices;
 	struct btrfs_fs_devices *seed_devices;
-	struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+	struct btrfs_super_block *disk_super = root->fs_info->super_copy;
 	struct btrfs_device *device;
 	u64 super_flags;
 
@@ -1691,15 +1710,19 @@
 		root->fs_info->fs_devices->num_can_discard++;
 	root->fs_info->fs_devices->total_rw_bytes += device->total_bytes;
 
+	spin_lock(&root->fs_info->free_chunk_lock);
+	root->fs_info->free_chunk_space += device->total_bytes;
+	spin_unlock(&root->fs_info->free_chunk_lock);
+
 	if (!blk_queue_nonrot(bdev_get_queue(bdev)))
 		root->fs_info->fs_devices->rotating = 1;
 
-	total_bytes = btrfs_super_total_bytes(&root->fs_info->super_copy);
-	btrfs_set_super_total_bytes(&root->fs_info->super_copy,
+	total_bytes = btrfs_super_total_bytes(root->fs_info->super_copy);
+	btrfs_set_super_total_bytes(root->fs_info->super_copy,
 				    total_bytes + device->total_bytes);
 
-	total_bytes = btrfs_super_num_devices(&root->fs_info->super_copy);
-	btrfs_set_super_num_devices(&root->fs_info->super_copy,
+	total_bytes = btrfs_super_num_devices(root->fs_info->super_copy);
+	btrfs_set_super_num_devices(root->fs_info->super_copy,
 				    total_bytes + 1);
 	mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
 
@@ -1790,7 +1813,7 @@
 		      struct btrfs_device *device, u64 new_size)
 {
 	struct btrfs_super_block *super_copy =
-		&device->dev_root->fs_info->super_copy;
+		device->dev_root->fs_info->super_copy;
 	u64 old_total = btrfs_super_total_bytes(super_copy);
 	u64 diff = new_size - device->total_bytes;
 
@@ -1849,7 +1872,7 @@
 static int btrfs_del_sys_chunk(struct btrfs_root *root, u64 chunk_objectid, u64
 			chunk_offset)
 {
-	struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+	struct btrfs_super_block *super_copy = root->fs_info->super_copy;
 	struct btrfs_disk_key *disk_key;
 	struct btrfs_chunk *chunk;
 	u8 *ptr;
@@ -2175,7 +2198,7 @@
 	bool retried = false;
 	struct extent_buffer *l;
 	struct btrfs_key key;
-	struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+	struct btrfs_super_block *super_copy = root->fs_info->super_copy;
 	u64 old_total = btrfs_super_total_bytes(super_copy);
 	u64 old_size = device->total_bytes;
 	u64 diff = device->total_bytes - new_size;
@@ -2192,8 +2215,12 @@
 	lock_chunks(root);
 
 	device->total_bytes = new_size;
-	if (device->writeable)
+	if (device->writeable) {
 		device->fs_devices->total_rw_bytes -= diff;
+		spin_lock(&root->fs_info->free_chunk_lock);
+		root->fs_info->free_chunk_space -= diff;
+		spin_unlock(&root->fs_info->free_chunk_lock);
+	}
 	unlock_chunks(root);
 
 again:
@@ -2257,6 +2284,9 @@
 		device->total_bytes = old_size;
 		if (device->writeable)
 			device->fs_devices->total_rw_bytes += diff;
+		spin_lock(&root->fs_info->free_chunk_lock);
+		root->fs_info->free_chunk_space += diff;
+		spin_unlock(&root->fs_info->free_chunk_lock);
 		unlock_chunks(root);
 		goto done;
 	}
@@ -2292,7 +2322,7 @@
 			   struct btrfs_key *key,
 			   struct btrfs_chunk *chunk, int item_size)
 {
-	struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+	struct btrfs_super_block *super_copy = root->fs_info->super_copy;
 	struct btrfs_disk_key disk_key;
 	u32 array_size;
 	u8 *ptr;
@@ -2615,6 +2645,11 @@
 		index++;
 	}
 
+	spin_lock(&extent_root->fs_info->free_chunk_lock);
+	extent_root->fs_info->free_chunk_space -= (stripe_size *
+						   map->num_stripes);
+	spin_unlock(&extent_root->fs_info->free_chunk_lock);
+
 	index = 0;
 	stripe = &chunk->stripe;
 	while (index < map->num_stripes) {
@@ -2848,7 +2883,7 @@
 
 static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
 			     u64 logical, u64 *length,
-			     struct btrfs_multi_bio **multi_ret,
+			     struct btrfs_bio **bbio_ret,
 			     int mirror_num)
 {
 	struct extent_map *em;
@@ -2866,18 +2901,18 @@
 	int i;
 	int num_stripes;
 	int max_errors = 0;
-	struct btrfs_multi_bio *multi = NULL;
+	struct btrfs_bio *bbio = NULL;
 
-	if (multi_ret && !(rw & (REQ_WRITE | REQ_DISCARD)))
+	if (bbio_ret && !(rw & (REQ_WRITE | REQ_DISCARD)))
 		stripes_allocated = 1;
 again:
-	if (multi_ret) {
-		multi = kzalloc(btrfs_multi_bio_size(stripes_allocated),
+	if (bbio_ret) {
+		bbio = kzalloc(btrfs_bio_size(stripes_allocated),
 				GFP_NOFS);
-		if (!multi)
+		if (!bbio)
 			return -ENOMEM;
 
-		atomic_set(&multi->error, 0);
+		atomic_set(&bbio->error, 0);
 	}
 
 	read_lock(&em_tree->lock);
@@ -2898,7 +2933,7 @@
 	if (mirror_num > map->num_stripes)
 		mirror_num = 0;
 
-	/* if our multi bio struct is too small, back off and try again */
+	/* if our btrfs_bio struct is too small, back off and try again */
 	if (rw & REQ_WRITE) {
 		if (map->type & (BTRFS_BLOCK_GROUP_RAID1 |
 				 BTRFS_BLOCK_GROUP_DUP)) {
@@ -2917,11 +2952,11 @@
 			stripes_required = map->num_stripes;
 		}
 	}
-	if (multi_ret && (rw & (REQ_WRITE | REQ_DISCARD)) &&
+	if (bbio_ret && (rw & (REQ_WRITE | REQ_DISCARD)) &&
 	    stripes_allocated < stripes_required) {
 		stripes_allocated = map->num_stripes;
 		free_extent_map(em);
-		kfree(multi);
+		kfree(bbio);
 		goto again;
 	}
 	stripe_nr = offset;
@@ -2950,7 +2985,7 @@
 		*length = em->len - offset;
 	}
 
-	if (!multi_ret)
+	if (!bbio_ret)
 		goto out;
 
 	num_stripes = 1;
@@ -2975,13 +3010,17 @@
 			stripe_index = find_live_mirror(map, 0,
 					    map->num_stripes,
 					    current->pid % map->num_stripes);
+			mirror_num = stripe_index + 1;
 		}
 
 	} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
-		if (rw & (REQ_WRITE | REQ_DISCARD))
+		if (rw & (REQ_WRITE | REQ_DISCARD)) {
 			num_stripes = map->num_stripes;
-		else if (mirror_num)
+		} else if (mirror_num) {
 			stripe_index = mirror_num - 1;
+		} else {
+			mirror_num = 1;
+		}
 
 	} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
 		int factor = map->num_stripes / map->sub_stripes;
@@ -3001,6 +3040,7 @@
 			stripe_index = find_live_mirror(map, stripe_index,
 					      map->sub_stripes, stripe_index +
 					      current->pid % map->sub_stripes);
+			mirror_num = stripe_index + 1;
 		}
 	} else {
 		/*
@@ -3009,15 +3049,16 @@
 		 * stripe_index is the number of our device in the stripe array
 		 */
 		stripe_index = do_div(stripe_nr, map->num_stripes);
+		mirror_num = stripe_index + 1;
 	}
 	BUG_ON(stripe_index >= map->num_stripes);
 
 	if (rw & REQ_DISCARD) {
 		for (i = 0; i < num_stripes; i++) {
-			multi->stripes[i].physical =
+			bbio->stripes[i].physical =
 				map->stripes[stripe_index].physical +
 				stripe_offset + stripe_nr * map->stripe_len;
-			multi->stripes[i].dev = map->stripes[stripe_index].dev;
+			bbio->stripes[i].dev = map->stripes[stripe_index].dev;
 
 			if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
 				u64 stripes;
@@ -3038,16 +3079,16 @@
 				}
 				stripes = stripe_nr_end - 1 - j;
 				do_div(stripes, map->num_stripes);
-				multi->stripes[i].length = map->stripe_len *
+				bbio->stripes[i].length = map->stripe_len *
 					(stripes - stripe_nr + 1);
 
 				if (i == 0) {
-					multi->stripes[i].length -=
+					bbio->stripes[i].length -=
 						stripe_offset;
 					stripe_offset = 0;
 				}
 				if (stripe_index == last_stripe)
-					multi->stripes[i].length -=
+					bbio->stripes[i].length -=
 						stripe_end_offset;
 			} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
 				u64 stripes;
@@ -3072,11 +3113,11 @@
 				}
 				stripes = stripe_nr_end - 1 - j;
 				do_div(stripes, factor);
-				multi->stripes[i].length = map->stripe_len *
+				bbio->stripes[i].length = map->stripe_len *
 					(stripes - stripe_nr + 1);
 
 				if (i < map->sub_stripes) {
-					multi->stripes[i].length -=
+					bbio->stripes[i].length -=
 						stripe_offset;
 					if (i == map->sub_stripes - 1)
 						stripe_offset = 0;
@@ -3084,11 +3125,11 @@
 				if (stripe_index >= last_stripe &&
 				    stripe_index <= (last_stripe +
 						     map->sub_stripes - 1)) {
-					multi->stripes[i].length -=
+					bbio->stripes[i].length -=
 						stripe_end_offset;
 				}
 			} else
-				multi->stripes[i].length = *length;
+				bbio->stripes[i].length = *length;
 
 			stripe_index++;
 			if (stripe_index == map->num_stripes) {
@@ -3099,19 +3140,20 @@
 		}
 	} else {
 		for (i = 0; i < num_stripes; i++) {
-			multi->stripes[i].physical =
+			bbio->stripes[i].physical =
 				map->stripes[stripe_index].physical +
 				stripe_offset +
 				stripe_nr * map->stripe_len;
-			multi->stripes[i].dev =
+			bbio->stripes[i].dev =
 				map->stripes[stripe_index].dev;
 			stripe_index++;
 		}
 	}
-	if (multi_ret) {
-		*multi_ret = multi;
-		multi->num_stripes = num_stripes;
-		multi->max_errors = max_errors;
+	if (bbio_ret) {
+		*bbio_ret = bbio;
+		bbio->num_stripes = num_stripes;
+		bbio->max_errors = max_errors;
+		bbio->mirror_num = mirror_num;
 	}
 out:
 	free_extent_map(em);
@@ -3120,9 +3162,9 @@
 
 int btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
 		      u64 logical, u64 *length,
-		      struct btrfs_multi_bio **multi_ret, int mirror_num)
+		      struct btrfs_bio **bbio_ret, int mirror_num)
 {
-	return __btrfs_map_block(map_tree, rw, logical, length, multi_ret,
+	return __btrfs_map_block(map_tree, rw, logical, length, bbio_ret,
 				 mirror_num);
 }
 
@@ -3191,28 +3233,30 @@
 	return 0;
 }
 
-static void end_bio_multi_stripe(struct bio *bio, int err)
+static void btrfs_end_bio(struct bio *bio, int err)
 {
-	struct btrfs_multi_bio *multi = bio->bi_private;
+	struct btrfs_bio *bbio = bio->bi_private;
 	int is_orig_bio = 0;
 
 	if (err)
-		atomic_inc(&multi->error);
+		atomic_inc(&bbio->error);
 
-	if (bio == multi->orig_bio)
+	if (bio == bbio->orig_bio)
 		is_orig_bio = 1;
 
-	if (atomic_dec_and_test(&multi->stripes_pending)) {
+	if (atomic_dec_and_test(&bbio->stripes_pending)) {
 		if (!is_orig_bio) {
 			bio_put(bio);
-			bio = multi->orig_bio;
+			bio = bbio->orig_bio;
 		}
-		bio->bi_private = multi->private;
-		bio->bi_end_io = multi->end_io;
+		bio->bi_private = bbio->private;
+		bio->bi_end_io = bbio->end_io;
+		bio->bi_bdev = (struct block_device *)
+					(unsigned long)bbio->mirror_num;
 		/* only send an error to the higher layers if it is
 		 * beyond the tolerance of the multi-bio
 		 */
-		if (atomic_read(&multi->error) > multi->max_errors) {
+		if (atomic_read(&bbio->error) > bbio->max_errors) {
 			err = -EIO;
 		} else if (err) {
 			/*
@@ -3222,7 +3266,7 @@
 			set_bit(BIO_UPTODATE, &bio->bi_flags);
 			err = 0;
 		}
-		kfree(multi);
+		kfree(bbio);
 
 		bio_endio(bio, err);
 	} else if (!is_orig_bio) {
@@ -3302,20 +3346,20 @@
 	u64 logical = (u64)bio->bi_sector << 9;
 	u64 length = 0;
 	u64 map_length;
-	struct btrfs_multi_bio *multi = NULL;
 	int ret;
 	int dev_nr = 0;
 	int total_devs = 1;
+	struct btrfs_bio *bbio = NULL;
 
 	length = bio->bi_size;
 	map_tree = &root->fs_info->mapping_tree;
 	map_length = length;
 
-	ret = btrfs_map_block(map_tree, rw, logical, &map_length, &multi,
+	ret = btrfs_map_block(map_tree, rw, logical, &map_length, &bbio,
 			      mirror_num);
 	BUG_ON(ret);
 
-	total_devs = multi->num_stripes;
+	total_devs = bbio->num_stripes;
 	if (map_length < length) {
 		printk(KERN_CRIT "mapping failed logical %llu bio len %llu "
 		       "len %llu\n", (unsigned long long)logical,
@@ -3323,25 +3367,28 @@
 		       (unsigned long long)map_length);
 		BUG();
 	}
-	multi->end_io = first_bio->bi_end_io;
-	multi->private = first_bio->bi_private;
-	multi->orig_bio = first_bio;
-	atomic_set(&multi->stripes_pending, multi->num_stripes);
+
+	bbio->orig_bio = first_bio;
+	bbio->private = first_bio->bi_private;
+	bbio->end_io = first_bio->bi_end_io;
+	atomic_set(&bbio->stripes_pending, bbio->num_stripes);
 
 	while (dev_nr < total_devs) {
-		if (total_devs > 1) {
-			if (dev_nr < total_devs - 1) {
-				bio = bio_clone(first_bio, GFP_NOFS);
-				BUG_ON(!bio);
-			} else {
-				bio = first_bio;
-			}
-			bio->bi_private = multi;
-			bio->bi_end_io = end_bio_multi_stripe;
+		if (dev_nr < total_devs - 1) {
+			bio = bio_clone(first_bio, GFP_NOFS);
+			BUG_ON(!bio);
+		} else {
+			bio = first_bio;
 		}
-		bio->bi_sector = multi->stripes[dev_nr].physical >> 9;
-		dev = multi->stripes[dev_nr].dev;
+		bio->bi_private = bbio;
+		bio->bi_end_io = btrfs_end_bio;
+		bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
+		dev = bbio->stripes[dev_nr].dev;
 		if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+			pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
+				 "(%s id %llu), size=%u\n", rw,
+				 (u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
+				 dev->name, dev->devid, bio->bi_size);
 			bio->bi_bdev = dev->bdev;
 			if (async_submit)
 				schedule_bio(root, dev, rw, bio);
@@ -3354,8 +3401,6 @@
 		}
 		dev_nr++;
 	}
-	if (total_devs == 1)
-		kfree(multi);
 	return 0;
 }
 
@@ -3616,15 +3661,20 @@
 	fill_device_from_item(leaf, dev_item, device);
 	device->dev_root = root->fs_info->dev_root;
 	device->in_fs_metadata = 1;
-	if (device->writeable)
+	if (device->writeable) {
 		device->fs_devices->total_rw_bytes += device->total_bytes;
+		spin_lock(&root->fs_info->free_chunk_lock);
+		root->fs_info->free_chunk_space += device->total_bytes -
+			device->bytes_used;
+		spin_unlock(&root->fs_info->free_chunk_lock);
+	}
 	ret = 0;
 	return ret;
 }
 
 int btrfs_read_sys_array(struct btrfs_root *root)
 {
-	struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
+	struct btrfs_super_block *super_copy = root->fs_info->super_copy;
 	struct extent_buffer *sb;
 	struct btrfs_disk_key *disk_key;
 	struct btrfs_chunk *chunk;
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 6d866db..78f2d4d 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -92,6 +92,20 @@
 	struct btrfs_work work;
 	struct rcu_head rcu;
 	struct work_struct rcu_work;
+
+	/* readahead state */
+	spinlock_t reada_lock;
+	atomic_t reada_in_flight;
+	u64 reada_next;
+	struct reada_zone *reada_curr_zone;
+	struct radix_tree_root reada_zones;
+	struct radix_tree_root reada_extents;
+
+	/* for sending down flush barriers */
+	struct bio *flush_bio;
+	struct completion flush_wait;
+	int nobarriers;
+
 };
 
 struct btrfs_fs_devices {
@@ -136,7 +150,10 @@
 	u64 length; /* only used for discard mappings */
 };
 
-struct btrfs_multi_bio {
+struct btrfs_bio;
+typedef void (btrfs_bio_end_io_t) (struct btrfs_bio *bio, int err);
+
+struct btrfs_bio {
 	atomic_t stripes_pending;
 	bio_end_io_t *end_io;
 	struct bio *orig_bio;
@@ -144,6 +161,7 @@
 	atomic_t error;
 	int max_errors;
 	int num_stripes;
+	int mirror_num;
 	struct btrfs_bio_stripe stripes[];
 };
 
@@ -171,7 +189,7 @@
 int btrfs_account_dev_extents_size(struct btrfs_device *device, u64 start,
 				   u64 end, u64 *length);
 
-#define btrfs_multi_bio_size(n) (sizeof(struct btrfs_multi_bio) + \
+#define btrfs_bio_size(n) (sizeof(struct btrfs_bio) + \
 			    (sizeof(struct btrfs_bio_stripe) * (n)))
 
 int btrfs_alloc_dev_extent(struct btrfs_trans_handle *trans,
@@ -180,7 +198,7 @@
 			   u64 chunk_offset, u64 start, u64 num_bytes);
 int btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw,
 		    u64 logical, u64 *length,
-		    struct btrfs_multi_bio **multi_ret, int mirror_num);
+		    struct btrfs_bio **bbio_ret, int mirror_num);
 int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree,
 		     u64 chunk_start, u64 physical, u64 devid,
 		     u64 **logical, int *naddrs, int *stripe_len);
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index 426aa46..3848b04 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -127,6 +127,17 @@
 again:
 	ret = btrfs_insert_xattr_item(trans, root, path, btrfs_ino(inode),
 				      name, name_len, value, size);
+	/*
+	 * If we're setting an xattr to a new value but the new value is say
+	 * exactly BTRFS_MAX_XATTR_SIZE, we could end up with EOVERFLOW getting
+	 * back from split_leaf.  This is because it thinks we'll be extending
+	 * the existing item size, but we're asking for enough space to add the
+	 * item itself.  So if we get EOVERFLOW just set ret to EEXIST and let
+	 * the rest of the function figure it out.
+	 */
+	if (ret == -EOVERFLOW)
+		ret = -EEXIST;
+
 	if (ret == -EEXIST) {
 		if (flags & XATTR_CREATE)
 			goto out;
diff --git a/fs/buffer.c b/fs/buffer.c
index 70a1974..19d8eb7 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -288,7 +288,7 @@
 	struct zone *zone;
 	int nid;
 
-	wakeup_flusher_threads(1024);
+	wakeup_flusher_threads(1024, WB_REASON_FREE_MORE_MEM);
 	yield();
 
 	for_each_online_node(nid) {
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 15b21e3..0f327c6 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -487,17 +487,15 @@
 		ci->i_rdcache_gen++;
 
 	/*
-	 * if we are newly issued FILE_SHARED, clear I_COMPLETE; we
+	 * if we are newly issued FILE_SHARED, clear D_COMPLETE; we
 	 * don't know what happened to this directory while we didn't
 	 * have the cap.
 	 */
 	if ((issued & CEPH_CAP_FILE_SHARED) &&
 	    (had & CEPH_CAP_FILE_SHARED) == 0) {
 		ci->i_shared_gen++;
-		if (S_ISDIR(ci->vfs_inode.i_mode)) {
-			dout(" marking %p NOT complete\n", &ci->vfs_inode);
-			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
-		}
+		if (S_ISDIR(ci->vfs_inode.i_mode))
+			ceph_dir_clear_complete(&ci->vfs_inode);
 	}
 }
 
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 382abc9..bca3948 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -108,7 +108,7 @@
  * falling back to a "normal" sync readdir if any dentries in the dir
  * are dropped.
  *
- * I_COMPLETE tells indicates we have all dentries in the dir.  It is
+ * D_COMPLETE tells indicates we have all dentries in the dir.  It is
  * defined IFF we hold CEPH_CAP_FILE_SHARED (which will be revoked by
  * the MDS if/when the directory is modified).
  */
@@ -199,8 +199,8 @@
 	filp->f_pos++;
 
 	/* make sure a dentry wasn't dropped while we didn't have parent lock */
-	if (!ceph_i_test(dir, CEPH_I_COMPLETE)) {
-		dout(" lost I_COMPLETE on %p; falling back to mds\n", dir);
+	if (!ceph_dir_test_complete(dir)) {
+		dout(" lost D_COMPLETE on %p; falling back to mds\n", dir);
 		err = -EAGAIN;
 		goto out;
 	}
@@ -285,7 +285,7 @@
 	if ((filp->f_pos == 2 || fi->dentry) &&
 	    !ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
 	    ceph_snap(inode) != CEPH_SNAPDIR &&
-	    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+	    ceph_dir_test_complete(inode) &&
 	    __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
 		spin_unlock(&inode->i_lock);
 		err = __dcache_readdir(filp, dirent, filldir);
@@ -351,7 +351,7 @@
 
 		if (!req->r_did_prepopulate) {
 			dout("readdir !did_prepopulate");
-			fi->dir_release_count--;    /* preclude I_COMPLETE */
+			fi->dir_release_count--;    /* preclude D_COMPLETE */
 		}
 
 		/* note next offset and last dentry name */
@@ -430,8 +430,7 @@
 	 */
 	spin_lock(&inode->i_lock);
 	if (ci->i_release_count == fi->dir_release_count) {
-		dout(" marking %p complete\n", inode);
-		/* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
+		ceph_dir_set_complete(inode);
 		ci->i_max_offset = filp->f_pos;
 	}
 	spin_unlock(&inode->i_lock);
@@ -614,7 +613,7 @@
 			    fsc->mount_options->snapdir_name,
 			    dentry->d_name.len) &&
 		    !is_root_ceph_dentry(dir, dentry) &&
-		    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
+		    ceph_dir_test_complete(dir) &&
 		    (__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
 			spin_unlock(&dir->i_lock);
 			dout(" dir %p complete, -ENOENT\n", dir);
@@ -934,7 +933,7 @@
 		 */
 
 		/* d_move screws up d_subdirs order */
-		ceph_i_clear(new_dir, CEPH_I_COMPLETE);
+		ceph_dir_clear_complete(new_dir);
 
 		d_move(old_dentry, new_dentry);
 
@@ -1092,7 +1091,75 @@
 	return 1;
 }
 
+/*
+ * Set/clear/test dir complete flag on the dir's dentry.
+ */
+static struct dentry * __d_find_any_alias(struct inode *inode)
+{
+	struct dentry *alias;
 
+	if (list_empty(&inode->i_dentry))
+		return NULL;
+	alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias);
+	return alias;
+}
+
+void ceph_dir_set_complete(struct inode *inode)
+{
+	struct dentry *dentry = __d_find_any_alias(inode);
+	
+	if (dentry && ceph_dentry(dentry)) {
+		dout(" marking %p (%p) complete\n", inode, dentry);
+		set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+	}
+}
+
+void ceph_dir_clear_complete(struct inode *inode)
+{
+	struct dentry *dentry = __d_find_any_alias(inode);
+
+	if (dentry && ceph_dentry(dentry)) {
+		dout(" marking %p (%p) NOT complete\n", inode, dentry);
+		clear_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+	}
+}
+
+bool ceph_dir_test_complete(struct inode *inode)
+{
+	struct dentry *dentry = __d_find_any_alias(inode);
+
+	if (dentry && ceph_dentry(dentry))
+		return test_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+	return false;
+}
+
+/*
+ * When the VFS prunes a dentry from the cache, we need to clear the
+ * complete flag on the parent directory.
+ *
+ * Called under dentry->d_lock.
+ */
+static void ceph_d_prune(struct dentry *dentry)
+{
+	struct ceph_dentry_info *di;
+
+	dout("ceph_d_prune %p\n", dentry);
+
+	/* do we have a valid parent? */
+	if (!dentry->d_parent || IS_ROOT(dentry))
+		return;
+
+	/* if we are not hashed, we don't affect D_COMPLETE */
+	if (d_unhashed(dentry))
+		return;
+
+	/*
+	 * we hold d_lock, so d_parent is stable, and d_fsdata is never
+	 * cleared until d_release
+	 */
+	di = ceph_dentry(dentry->d_parent);
+	clear_bit(CEPH_D_COMPLETE, &di->flags);
+}
 
 /*
  * read() on a dir.  This weird interface hack only works if mounted
@@ -1306,6 +1373,7 @@
 const struct dentry_operations ceph_dentry_ops = {
 	.d_revalidate = ceph_d_revalidate,
 	.d_release = ceph_d_release,
+	.d_prune = ceph_d_prune,
 };
 
 const struct dentry_operations ceph_snapdir_dentry_ops = {
@@ -1315,4 +1383,5 @@
 
 const struct dentry_operations ceph_snap_dentry_ops = {
 	.d_release = ceph_d_release,
+	.d_prune = ceph_d_prune,
 };
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 1616a0d..116f365 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -771,9 +771,9 @@
 	    ceph_snap(inode) == CEPH_NOSNAP &&
 	    (le32_to_cpu(info->cap.caps) & CEPH_CAP_FILE_SHARED) &&
 	    (issued & CEPH_CAP_FILE_EXCL) == 0 &&
-	    (ci->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
+	    !ceph_dir_test_complete(inode)) {
 		dout(" marking %p complete (empty)\n", inode);
-		/* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
+		ceph_dir_set_complete(inode);
 		ci->i_max_offset = 2;
 	}
 
@@ -856,7 +856,7 @@
 	di = ceph_dentry(dn);
 
 	spin_lock(&inode->i_lock);
-	if ((ceph_inode(inode)->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
+	if (!ceph_dir_test_complete(inode)) {
 		spin_unlock(&inode->i_lock);
 		return;
 	}
@@ -1056,7 +1056,7 @@
 			 * d_move() puts the renamed dentry at the end of
 			 * d_subdirs.  We need to assign it an appropriate
 			 * directory offset so we can behave when holding
-			 * I_COMPLETE.
+			 * D_COMPLETE.
 			 */
 			ceph_set_dentry_offset(req->r_old_dentry);
 			dout("dn %p gets new offset %lld\n", req->r_old_dentry, 
@@ -1328,12 +1328,13 @@
  */
 void ceph_queue_writeback(struct inode *inode)
 {
+	ihold(inode);
 	if (queue_work(ceph_inode_to_client(inode)->wb_wq,
 		       &ceph_inode(inode)->i_wb_work)) {
 		dout("ceph_queue_writeback %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_writeback %p failed\n", inode);
+		iput(inode);
 	}
 }
 
@@ -1353,12 +1354,13 @@
  */
 void ceph_queue_invalidate(struct inode *inode)
 {
+	ihold(inode);
 	if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
 		       &ceph_inode(inode)->i_pg_inv_work)) {
 		dout("ceph_queue_invalidate %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_invalidate %p failed\n", inode);
+		iput(inode);
 	}
 }
 
@@ -1434,13 +1436,14 @@
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
+	ihold(inode);
 	if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
 		       &ci->i_vmtruncate_work)) {
 		dout("ceph_queue_vmtruncate %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
 		     inode, ci->i_truncate_pending);
+		iput(inode);
 	}
 }
 
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 1d72f15..264ab70 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -619,7 +619,7 @@
  *
  * Called under mdsc->mutex.
  */
-struct dentry *get_nonsnap_parent(struct dentry *dentry)
+static struct dentry *get_nonsnap_parent(struct dentry *dentry)
 {
 	/*
 	 * we don't need to worry about protecting the d_parent access
@@ -2002,7 +2002,7 @@
 }
 
 /*
- * Invalidate dir I_COMPLETE, dentry lease state on an aborted MDS
+ * Invalidate dir D_COMPLETE, dentry lease state on an aborted MDS
  * namespace request.
  */
 void ceph_invalidate_dir_request(struct ceph_mds_request *req)
@@ -2010,9 +2010,9 @@
 	struct inode *inode = req->r_locked_dir;
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
-	dout("invalidate_dir_request %p (I_COMPLETE, lease(s))\n", inode);
+	dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode);
 	spin_lock(&inode->i_lock);
-	ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
+	ceph_dir_clear_complete(inode);
 	ci->i_release_count++;
 	spin_unlock(&inode->i_lock);
 
@@ -3154,7 +3154,7 @@
 /*
  * true if all sessions are closed, or we force unmount
  */
-bool done_closing_sessions(struct ceph_mds_client *mdsc)
+static bool done_closing_sessions(struct ceph_mds_client *mdsc)
 {
 	int i, n = 0;
 
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 788f5ad..8dc73a5 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -426,7 +426,7 @@
 /*
  * create a new fs client
  */
-struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt,
+static struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt,
 					struct ceph_options *opt)
 {
 	struct ceph_fs_client *fsc;
@@ -502,7 +502,7 @@
 	return ERR_PTR(err);
 }
 
-void destroy_fs_client(struct ceph_fs_client *fsc)
+static void destroy_fs_client(struct ceph_fs_client *fsc)
 {
 	dout("destroy_fs_client %p\n", fsc);
 
@@ -638,10 +638,12 @@
 	if (err == 0) {
 		dout("open_root_inode success\n");
 		if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT &&
-		    fsc->sb->s_root == NULL)
+		    fsc->sb->s_root == NULL) {
 			root = d_alloc_root(req->r_target_inode);
-		else
+			ceph_init_dentry(root);
+		} else {
 			root = d_obtain_alias(req->r_target_inode);
+		}
 		req->r_target_inode = NULL;
 		dout("open_root_inode success, root dentry is %p\n", root);
 	} else {
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index b01442a..01bf189 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -203,6 +203,7 @@
  * Ceph dentry state
  */
 struct ceph_dentry_info {
+	unsigned long flags;
 	struct ceph_mds_session *lease_session;
 	u32 lease_gen, lease_shared_gen;
 	u32 lease_seq;
@@ -213,6 +214,18 @@
 	u64 offset;
 };
 
+/*
+ * dentry flags
+ *
+ * The locking for D_COMPLETE is a bit odd:
+ *  - we can clear it at almost any time (see ceph_d_prune)
+ *  - it is only meaningful if:
+ *    - we hold dir inode i_lock
+ *    - we hold dir FILE_SHARED caps
+ *    - the dentry D_COMPLETE is set
+ */
+#define CEPH_D_COMPLETE 1  /* if set, d_u.d_subdirs is complete directory */
+
 struct ceph_inode_xattrs_info {
 	/*
 	 * (still encoded) xattr blob. we avoid the overhead of parsing
@@ -251,7 +264,7 @@
 	struct timespec i_rctime;
 	u64 i_rbytes, i_rfiles, i_rsubdirs;
 	u64 i_files, i_subdirs;
-	u64 i_max_offset;  /* largest readdir offset, set with I_COMPLETE */
+	u64 i_max_offset;  /* largest readdir offset, set with D_COMPLETE */
 
 	struct rb_root i_fragtree;
 	struct mutex i_fragtree_mutex;
@@ -416,7 +429,6 @@
 /*
  * Ceph inode.
  */
-#define CEPH_I_COMPLETE  1  /* we have complete directory cached */
 #define CEPH_I_NODELAY   4  /* do not delay cap release */
 #define CEPH_I_FLUSH     8  /* do not delay flush of dirty metadata */
 #define CEPH_I_NOFLUSH  16  /* do not flush dirty caps */
@@ -474,6 +486,13 @@
 }
 
 /*
+ * set/clear directory D_COMPLETE flag
+ */
+void ceph_dir_set_complete(struct inode *inode);
+void ceph_dir_clear_complete(struct inode *inode);
+bool ceph_dir_test_complete(struct inode *inode);
+
+/*
  * caps helpers
  */
 static inline bool __ceph_is_any_real_caps(struct ceph_inode_info *ci)
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 2cfb695..5d9b9ac 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -204,7 +204,7 @@
 }
 
 /* first calculate 24 bytes ntlm response and then 16 byte session key */
-int setup_ntlm_response(struct cifs_ses *ses)
+int setup_ntlm_response(struct cifs_ses *ses, const struct nls_table *nls_cp)
 {
 	int rc = 0;
 	unsigned int temp_len = CIFS_SESS_KEY_SIZE + CIFS_AUTH_RESP_SIZE;
@@ -221,14 +221,14 @@
 	ses->auth_key.len = temp_len;
 
 	rc = SMBNTencrypt(ses->password, ses->server->cryptkey,
-			ses->auth_key.response + CIFS_SESS_KEY_SIZE);
+			ses->auth_key.response + CIFS_SESS_KEY_SIZE, nls_cp);
 	if (rc) {
 		cFYI(1, "%s Can't generate NTLM response, error: %d",
 			__func__, rc);
 		return rc;
 	}
 
-	rc = E_md4hash(ses->password, temp_key);
+	rc = E_md4hash(ses->password, temp_key, nls_cp);
 	if (rc) {
 		cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
 		return rc;
@@ -404,7 +404,7 @@
 	}
 
 	/* calculate md4 hash of password */
-	E_md4hash(ses->password, nt_hash);
+	E_md4hash(ses->password, nt_hash, nls_cp);
 
 	rc = crypto_shash_setkey(ses->server->secmech.hmacmd5, nt_hash,
 				CIFS_NTHASH_SIZE);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index d9dbaf8..30ff560 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -125,5 +125,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* CONFIG_CIFS_NFSD_EXPORT */
 
-#define CIFS_VERSION   "1.75"
+#define CIFS_VERSION   "1.76"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index ef4f631..6f4e243 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -395,8 +395,9 @@
 extern int cifs_verify_signature(struct kvec *iov, unsigned int nr_iov,
 				 struct TCP_Server_Info *server,
 				__u32 expected_sequence_number);
-extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *);
-extern int setup_ntlm_response(struct cifs_ses *);
+extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *,
+			const struct nls_table *);
+extern int setup_ntlm_response(struct cifs_ses *, const struct nls_table *);
 extern int setup_ntlmv2_rsp(struct cifs_ses *, const struct nls_table *);
 extern int cifs_crypto_shash_allocate(struct TCP_Server_Info *);
 extern void cifs_crypto_shash_release(struct TCP_Server_Info *);
@@ -448,7 +449,8 @@
 		const unsigned char *path,
 		struct cifs_sb_info *cifs_sb, int xid);
 extern int mdfour(unsigned char *, unsigned char *, int);
-extern int E_md4hash(const unsigned char *passwd, unsigned char *p16);
+extern int E_md4hash(const unsigned char *passwd, unsigned char *p16,
+			const struct nls_table *codepage);
 extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8,
 			unsigned char *p24);
 
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d545a95..d6a972d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -37,6 +37,7 @@
 #include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <linux/inet.h>
+#include <linux/module.h>
 #include <net/ipv6.h>
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -3452,7 +3453,7 @@
 		else
 #endif /* CIFS_WEAK_PW_HASH */
 		rc = SMBNTencrypt(tcon->password, ses->server->cryptkey,
-					bcc_ptr);
+					bcc_ptr, nls_codepage);
 
 		bcc_ptr += CIFS_AUTH_RESP_SIZE;
 		if (ses->capabilities & CAP_UNICODE) {
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index ea096ce..cf0b153 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -645,20 +645,20 @@
 }
 
 static struct cifsLockInfo *
-cifs_lock_init(__u64 len, __u64 offset, __u8 type, __u16 netfid)
+cifs_lock_init(__u64 offset, __u64 length, __u8 type, __u16 netfid)
 {
-	struct cifsLockInfo *li =
+	struct cifsLockInfo *lock =
 		kmalloc(sizeof(struct cifsLockInfo), GFP_KERNEL);
-	if (!li)
-		return li;
-	li->netfid = netfid;
-	li->offset = offset;
-	li->length = len;
-	li->type = type;
-	li->pid = current->tgid;
-	INIT_LIST_HEAD(&li->blist);
-	init_waitqueue_head(&li->block_q);
-	return li;
+	if (!lock)
+		return lock;
+	lock->offset = offset;
+	lock->length = length;
+	lock->type = type;
+	lock->netfid = netfid;
+	lock->pid = current->tgid;
+	INIT_LIST_HEAD(&lock->blist);
+	init_waitqueue_head(&lock->block_q);
+	return lock;
 }
 
 static void
@@ -672,7 +672,7 @@
 }
 
 static bool
-cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
+__cifs_find_lock_conflict(struct cifsInodeInfo *cinode, __u64 offset,
 			__u64 length, __u8 type, __u16 netfid,
 			struct cifsLockInfo **conf_lock)
 {
@@ -694,6 +694,14 @@
 	return false;
 }
 
+static bool
+cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+			struct cifsLockInfo **conf_lock)
+{
+	return __cifs_find_lock_conflict(cinode, lock->offset, lock->length,
+					 lock->type, lock->netfid, conf_lock);
+}
+
 static int
 cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
 	       __u8 type, __u16 netfid, struct file_lock *flock)
@@ -704,8 +712,8 @@
 
 	mutex_lock(&cinode->lock_mutex);
 
-	exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
-					&conf_lock);
+	exist = __cifs_find_lock_conflict(cinode, offset, length, type, netfid,
+					  &conf_lock);
 	if (exist) {
 		flock->fl_start = conf_lock->offset;
 		flock->fl_end = conf_lock->offset + conf_lock->length - 1;
@@ -723,40 +731,27 @@
 	return rc;
 }
 
-static int
-cifs_lock_add(struct cifsInodeInfo *cinode, __u64 len, __u64 offset,
-	      __u8 type, __u16 netfid)
+static void
+cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock)
 {
-	struct cifsLockInfo *li;
-
-	li = cifs_lock_init(len, offset, type, netfid);
-	if (!li)
-		return -ENOMEM;
-
 	mutex_lock(&cinode->lock_mutex);
-	list_add_tail(&li->llist, &cinode->llist);
+	list_add_tail(&lock->llist, &cinode->llist);
 	mutex_unlock(&cinode->lock_mutex);
-	return 0;
 }
 
 static int
-cifs_lock_add_if(struct cifsInodeInfo *cinode, __u64 offset, __u64 length,
-		 __u8 type, __u16 netfid, bool wait)
+cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock,
+		 bool wait)
 {
-	struct cifsLockInfo *lock, *conf_lock;
+	struct cifsLockInfo *conf_lock;
 	bool exist;
 	int rc = 0;
 
-	lock = cifs_lock_init(length, offset, type, netfid);
-	if (!lock)
-		return -ENOMEM;
-
 try_again:
 	exist = false;
 	mutex_lock(&cinode->lock_mutex);
 
-	exist = cifs_find_lock_conflict(cinode, offset, length, type, netfid,
-					&conf_lock);
+	exist = cifs_find_lock_conflict(cinode, lock, &conf_lock);
 	if (!exist && cinode->can_cache_brlcks) {
 		list_add_tail(&lock->llist, &cinode->llist);
 		mutex_unlock(&cinode->lock_mutex);
@@ -775,14 +770,10 @@
 					(lock->blist.next == &lock->blist));
 		if (!rc)
 			goto try_again;
-		else {
-			mutex_lock(&cinode->lock_mutex);
-			list_del_init(&lock->blist);
-			mutex_unlock(&cinode->lock_mutex);
-		}
+		mutex_lock(&cinode->lock_mutex);
+		list_del_init(&lock->blist);
 	}
 
-	kfree(lock);
 	mutex_unlock(&cinode->lock_mutex);
 	return rc;
 }
@@ -794,6 +785,9 @@
 	struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
 	unsigned char saved_type = flock->fl_type;
 
+	if ((flock->fl_flags & FL_POSIX) == 0)
+		return 1;
+
 	mutex_lock(&cinode->lock_mutex);
 	posix_test_lock(file, flock);
 
@@ -810,12 +804,15 @@
 cifs_posix_lock_set(struct file *file, struct file_lock *flock)
 {
 	struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
-	int rc;
+	int rc = 1;
+
+	if ((flock->fl_flags & FL_POSIX) == 0)
+		return rc;
 
 	mutex_lock(&cinode->lock_mutex);
 	if (!cinode->can_cache_brlcks) {
 		mutex_unlock(&cinode->lock_mutex);
-		return 1;
+		return rc;
 	}
 	rc = posix_lock_file_wait(file, flock);
 	mutex_unlock(&cinode->lock_mutex);
@@ -928,7 +925,7 @@
 		else
 			type = CIFS_WRLCK;
 
-		lck = cifs_lock_init(length, flock->fl_start, type,
+		lck = cifs_lock_init(flock->fl_start, length, type,
 				     cfile->netfid);
 		if (!lck) {
 			rc = -ENOMEM;
@@ -1065,14 +1062,12 @@
 		if (rc != 0)
 			cERROR(1, "Error unlocking previously locked "
 				   "range %d during test of lock", rc);
-		rc = 0;
-		return rc;
+		return 0;
 	}
 
 	if (type & LOCKING_ANDX_SHARED_LOCK) {
 		flock->fl_type = F_WRLCK;
-		rc = 0;
-		return rc;
+		return 0;
 	}
 
 	rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
@@ -1090,8 +1085,7 @@
 	} else
 		flock->fl_type = F_WRLCK;
 
-	rc = 0;
-	return rc;
+	return 0;
 }
 
 static void
@@ -1249,20 +1243,26 @@
 	}
 
 	if (lock) {
-		rc = cifs_lock_add_if(cinode, flock->fl_start, length,
-				      type, netfid, wait_flag);
+		struct cifsLockInfo *lock;
+
+		lock = cifs_lock_init(flock->fl_start, length, type, netfid);
+		if (!lock)
+			return -ENOMEM;
+
+		rc = cifs_lock_add_if(cinode, lock, wait_flag);
 		if (rc < 0)
-			return rc;
-		else if (!rc)
+			kfree(lock);
+		if (rc <= 0)
 			goto out;
 
 		rc = CIFSSMBLock(xid, tcon, netfid, current->tgid, length,
 				 flock->fl_start, 0, 1, type, wait_flag, 0);
-		if (rc == 0) {
-			/* For Windows locks we must store them. */
-			rc = cifs_lock_add(cinode, length, flock->fl_start,
-					   type, netfid);
+		if (rc) {
+			kfree(lock);
+			goto out;
 		}
+
+		cifs_lock_add(cinode, lock);
 	} else if (unlock)
 		rc = cifs_unlock_range(cfile, flock, xid);
 
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c7d80e2..4ec3ee9 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -683,7 +683,7 @@
 			cpu_to_le16(CIFS_AUTH_RESP_SIZE);
 
 		/* calculate ntlm response and session key */
-		rc = setup_ntlm_response(ses);
+		rc = setup_ntlm_response(ses, nls_cp);
 		if (rc) {
 			cERROR(1, "Error %d during NTLM authentication", rc);
 			goto ssetup_exit;
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index ac1221d..7cacba1 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -199,75 +199,36 @@
 	return rc;
 }
 
-/* Routines for Windows NT MD4 Hash functions. */
-static int
-_my_wcslen(__u16 *str)
-{
-	int len = 0;
-	while (*str++ != 0)
-		len++;
-	return len;
-}
-
-/*
- * Convert a string into an NT UNICODE string.
- * Note that regardless of processor type
- * this must be in intel (little-endian)
- * format.
- */
-
-static int
-_my_mbstowcs(__u16 *dst, const unsigned char *src, int len)
-{	/* BB not a very good conversion routine - change/fix */
-	int i;
-	__u16 val;
-
-	for (i = 0; i < len; i++) {
-		val = *src;
-		SSVAL(dst, 0, val);
-		dst++;
-		src++;
-		if (val == 0)
-			break;
-	}
-	return i;
-}
-
 /*
  * Creates the MD4 Hash of the users password in NT UNICODE.
  */
 
 int
-E_md4hash(const unsigned char *passwd, unsigned char *p16)
+E_md4hash(const unsigned char *passwd, unsigned char *p16,
+	const struct nls_table *codepage)
 {
 	int rc;
 	int len;
 	__u16 wpwd[129];
 
 	/* Password cannot be longer than 128 characters */
-	if (passwd) {
-		len = strlen((char *) passwd);
-		if (len > 128)
-			len = 128;
-
-		/* Password must be converted to NT unicode */
-		_my_mbstowcs(wpwd, passwd, len);
-	} else
+	if (passwd) /* Password must be converted to NT unicode */
+		len = cifs_strtoUCS(wpwd, passwd, 128, codepage);
+	else {
 		len = 0;
+		*wpwd = 0; /* Ensure string is null terminated */
+	}
 
-	wpwd[len] = 0;	/* Ensure string is null terminated */
-	/* Calculate length in bytes */
-	len = _my_wcslen(wpwd) * sizeof(__u16);
-
-	rc = mdfour(p16, (unsigned char *) wpwd, len);
-	memset(wpwd, 0, 129 * 2);
+	rc = mdfour(p16, (unsigned char *) wpwd, len * sizeof(__u16));
+	memset(wpwd, 0, 129 * sizeof(__u16));
 
 	return rc;
 }
 
 /* Does the NT MD4 hash then des encryption. */
 int
-SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
+SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24,
+		const struct nls_table *codepage)
 {
 	int rc;
 	unsigned char p16[16], p21[21];
@@ -275,7 +236,7 @@
 	memset(p16, '\0', 16);
 	memset(p21, '\0', 21);
 
-	rc = E_md4hash(passwd, p16);
+	rc = E_md4hash(passwd, p16, codepage);
 	if (rc) {
 		cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
 		return rc;
diff --git a/fs/dcache.c b/fs/dcache.c
index 274f13e..10ba92d 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -36,6 +36,7 @@
 #include <linux/bit_spinlock.h>
 #include <linux/rculist_bl.h>
 #include <linux/prefetch.h>
+#include <linux/ratelimit.h>
 #include "internal.h"
 
 /*
@@ -546,9 +547,11 @@
 	 * would make it unreachable from the root,
 	 * we might still populate it if it was a
 	 * working directory or similar).
+	 * We also need to leave mountpoints alone,
+	 * directory or not.
 	 */
-	if (dentry->d_count > 1) {
-		if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) {
+	if (dentry->d_count > 1 && dentry->d_inode) {
+		if (S_ISDIR(dentry->d_inode->i_mode) || d_mountpoint(dentry)) {
 			spin_unlock(&dentry->d_lock);
 			return -EBUSY;
 		}
@@ -2381,8 +2384,16 @@
 				actual = __d_unalias(inode, dentry, alias);
 			}
 			write_sequnlock(&rename_lock);
-			if (IS_ERR(actual))
+			if (IS_ERR(actual)) {
+				if (PTR_ERR(actual) == -ELOOP)
+					pr_warn_ratelimited(
+						"VFS: Lookup of '%s' in %s %s"
+						" would have caused loop\n",
+						dentry->d_name.name,
+						inode->i_sb->s_type->name,
+						inode->i_sb->s_id);
 				dput(alias);
+			}
 			goto out_nolock;
 		}
 	}
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 58609bd..2a83425 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -967,7 +967,7 @@
 
 /**
  * ecryptfs_new_file_context
- * @ecryptfs_dentry: The eCryptfs dentry
+ * @ecryptfs_inode: The eCryptfs inode
  *
  * If the crypto context for the file has not yet been established,
  * this is where we do that.  Establishing a new crypto context
@@ -984,13 +984,13 @@
  *
  * Returns zero on success; non-zero otherwise
  */
-int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry)
+int ecryptfs_new_file_context(struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-	    &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+	    &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
 	    &ecryptfs_superblock_to_private(
-		    ecryptfs_dentry->d_sb)->mount_crypt_stat;
+		    ecryptfs_inode->i_sb)->mount_crypt_stat;
 	int cipher_name_len;
 	int rc = 0;
 
@@ -1299,12 +1299,12 @@
 }
 
 static int
-ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry,
+ecryptfs_write_metadata_to_contents(struct inode *ecryptfs_inode,
 				    char *virt, size_t virt_len)
 {
 	int rc;
 
-	rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
+	rc = ecryptfs_write_lower(ecryptfs_inode, virt,
 				  0, virt_len);
 	if (rc < 0)
 		printk(KERN_ERR "%s: Error attempting to write header "
@@ -1338,7 +1338,8 @@
 
 /**
  * ecryptfs_write_metadata
- * @ecryptfs_dentry: The eCryptfs dentry
+ * @ecryptfs_dentry: The eCryptfs dentry, which should be negative
+ * @ecryptfs_inode: The newly created eCryptfs inode
  *
  * Write the file headers out.  This will likely involve a userspace
  * callout, in which the session key is encrypted with one or more
@@ -1348,10 +1349,11 @@
  *
  * Returns zero on success; non-zero on error
  */
-int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry)
+int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry,
+			    struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-		&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+		&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	unsigned int order;
 	char *virt;
 	size_t virt_len;
@@ -1391,7 +1393,7 @@
 		rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt,
 						      size);
 	else
-		rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt,
+		rc = ecryptfs_write_metadata_to_contents(ecryptfs_inode, virt,
 							 virt_len);
 	if (rc) {
 		printk(KERN_ERR "%s: Error writing metadata out to lower file; "
@@ -1943,7 +1945,7 @@
 
 /* We could either offset on every reverse map or just pad some 0x00's
  * at the front here */
-static const unsigned char filename_rev_map[] = {
+static const unsigned char filename_rev_map[256] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 15 */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 23 */
@@ -1959,7 +1961,7 @@
 	0x00, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, /* 103 */
 	0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, /* 111 */
 	0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, /* 119 */
-	0x3D, 0x3E, 0x3F
+	0x3D, 0x3E, 0x3F /* 123 - 255 initialized to 0x00 */
 };
 
 /**
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 54481a3..a9f29b1 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -584,9 +584,10 @@
 int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode);
 int ecryptfs_encrypt_page(struct page *page);
 int ecryptfs_decrypt_page(struct page *page);
-int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry);
+int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry,
+			    struct inode *ecryptfs_inode);
 int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry);
-int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry);
+int ecryptfs_new_file_context(struct inode *ecryptfs_inode);
 void ecryptfs_write_crypt_stat_flags(char *page_virt,
 				     struct ecryptfs_crypt_stat *crypt_stat,
 				     size_t *written);
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index c6ac98c..d3f95f9 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -139,6 +139,27 @@
 	return rc;
 }
 
+static void ecryptfs_vma_close(struct vm_area_struct *vma)
+{
+	filemap_write_and_wait(vma->vm_file->f_mapping);
+}
+
+static const struct vm_operations_struct ecryptfs_file_vm_ops = {
+	.close		= ecryptfs_vma_close,
+	.fault		= filemap_fault,
+};
+
+static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	int rc;
+
+	rc = generic_file_mmap(file, vma);
+	if (!rc)
+		vma->vm_ops = &ecryptfs_file_vm_ops;
+
+	return rc;
+}
+
 struct kmem_cache *ecryptfs_file_info_cache;
 
 /**
@@ -349,7 +370,7 @@
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = ecryptfs_compat_ioctl,
 #endif
-	.mmap = generic_file_mmap,
+	.mmap = ecryptfs_file_mmap,
 	.open = ecryptfs_open,
 	.flush = ecryptfs_flush,
 	.release = ecryptfs_release,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index a36d327..32f90a3a 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -172,22 +172,23 @@
  * it. It will also update the eCryptfs directory inode to mimic the
  * stat of the lower directory inode.
  *
- * Returns zero on success; non-zero on error condition
+ * Returns the new eCryptfs inode on success; an ERR_PTR on error condition
  */
-static int
+static struct inode *
 ecryptfs_do_create(struct inode *directory_inode,
 		   struct dentry *ecryptfs_dentry, int mode)
 {
 	int rc;
 	struct dentry *lower_dentry;
 	struct dentry *lower_dir_dentry;
+	struct inode *inode;
 
 	lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
 	if (IS_ERR(lower_dir_dentry)) {
 		ecryptfs_printk(KERN_ERR, "Error locking directory of "
 				"dentry\n");
-		rc = PTR_ERR(lower_dir_dentry);
+		inode = ERR_CAST(lower_dir_dentry);
 		goto out;
 	}
 	rc = ecryptfs_create_underlying_file(lower_dir_dentry->d_inode,
@@ -195,20 +196,19 @@
 	if (rc) {
 		printk(KERN_ERR "%s: Failure to create dentry in lower fs; "
 		       "rc = [%d]\n", __func__, rc);
+		inode = ERR_PTR(rc);
 		goto out_lock;
 	}
-	rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry,
-				directory_inode->i_sb);
-	if (rc) {
-		ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n");
+	inode = __ecryptfs_get_inode(lower_dentry->d_inode,
+				     directory_inode->i_sb);
+	if (IS_ERR(inode))
 		goto out_lock;
-	}
 	fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode);
 	fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode);
 out_lock:
 	unlock_dir(lower_dir_dentry);
 out:
-	return rc;
+	return inode;
 }
 
 /**
@@ -219,26 +219,26 @@
  *
  * Returns zero on success
  */
-static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry)
+static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry,
+				    struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-		&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+		&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	int rc = 0;
 
-	if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
+	if (S_ISDIR(ecryptfs_inode->i_mode)) {
 		ecryptfs_printk(KERN_DEBUG, "This is a directory\n");
 		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
 		goto out;
 	}
 	ecryptfs_printk(KERN_DEBUG, "Initializing crypto context\n");
-	rc = ecryptfs_new_file_context(ecryptfs_dentry);
+	rc = ecryptfs_new_file_context(ecryptfs_inode);
 	if (rc) {
 		ecryptfs_printk(KERN_ERR, "Error creating new file "
 				"context; rc = [%d]\n", rc);
 		goto out;
 	}
-	rc = ecryptfs_get_lower_file(ecryptfs_dentry,
-				     ecryptfs_dentry->d_inode);
+	rc = ecryptfs_get_lower_file(ecryptfs_dentry, ecryptfs_inode);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to initialize "
 			"the lower file for the dentry with name "
@@ -246,10 +246,10 @@
 			ecryptfs_dentry->d_name.name, rc);
 		goto out;
 	}
-	rc = ecryptfs_write_metadata(ecryptfs_dentry);
+	rc = ecryptfs_write_metadata(ecryptfs_dentry, ecryptfs_inode);
 	if (rc)
 		printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc);
-	ecryptfs_put_lower_file(ecryptfs_dentry->d_inode);
+	ecryptfs_put_lower_file(ecryptfs_inode);
 out:
 	return rc;
 }
@@ -269,18 +269,28 @@
 ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry,
 		int mode, struct nameidata *nd)
 {
+	struct inode *ecryptfs_inode;
 	int rc;
 
-	/* ecryptfs_do_create() calls ecryptfs_interpose() */
-	rc = ecryptfs_do_create(directory_inode, ecryptfs_dentry, mode);
-	if (unlikely(rc)) {
+	ecryptfs_inode = ecryptfs_do_create(directory_inode, ecryptfs_dentry,
+					    mode);
+	if (unlikely(IS_ERR(ecryptfs_inode))) {
 		ecryptfs_printk(KERN_WARNING, "Failed to create file in"
 				"lower filesystem\n");
+		rc = PTR_ERR(ecryptfs_inode);
 		goto out;
 	}
 	/* At this point, a file exists on "disk"; we need to make sure
 	 * that this on disk file is prepared to be an ecryptfs file */
-	rc = ecryptfs_initialize_file(ecryptfs_dentry);
+	rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode);
+	if (rc) {
+		drop_nlink(ecryptfs_inode);
+		unlock_new_inode(ecryptfs_inode);
+		iput(ecryptfs_inode);
+		goto out;
+	}
+	d_instantiate(ecryptfs_dentry, ecryptfs_inode);
+	unlock_new_inode(ecryptfs_inode);
 out:
 	return rc;
 }
diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
index fa9a286..da42f32 100644
--- a/fs/exofs/Kconfig
+++ b/fs/exofs/Kconfig
@@ -5,7 +5,7 @@
 # selected by any of the users.
 config ORE
 	tristate
-	depends on EXOFS_FS
+	depends on EXOFS_FS || PNFS_OBJLAYOUT
 	select ASYNC_XOR
 	default SCSI_OSD_ULD
 
diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c
index fcfa86a..d271ad8 100644
--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/div64.h>
 #include <linux/lcm.h>
 
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 057b237..e6085ec 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -35,6 +35,7 @@
 #include <linux/parser.h>
 #include <linux/vfs.h>
 #include <linux/random.h>
+#include <linux/module.h>
 #include <linux/exportfs.h>
 #include <linux/slab.h>
 
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index f6dba45..12ccacd 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -565,7 +565,7 @@
 	brelse(bitmap_bh);
 	printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
 	       ", computed = %llu, %llu\n",
-	       EXT4_B2C(sbi, ext4_free_blocks_count(es)),
+	       EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)),
 	       desc_count, bitmap_count);
 	return bitmap_count;
 #else
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index cc5a6da..848f436 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2270,6 +2270,7 @@
 			ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
 			       "%ld pages, ino %lu; err %d", __func__,
 				wbc->nr_to_write, inode->i_ino, ret);
+			blk_finish_plug(&plug);
 			goto out_writepages;
 		}
 
@@ -2372,7 +2373,7 @@
 	 * start pushing delalloc when 1/2 of free blocks are dirty.
 	 */
 	if (free_blocks < 2 * dirty_blocks)
-		writeback_inodes_sb_if_idle(sb);
+		writeback_inodes_sb_if_idle(sb, WB_REASON_FS_FREE_SPACE);
 
 	return 0;
 }
@@ -2806,8 +2807,8 @@
 	spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
 
 	/* queue the work to convert unwritten extents to written */
-	queue_work(wq, &io_end->work);
 	iocb->private = NULL;
+	queue_work(wq, &io_end->work);
 
 	/* XXX: probably should move into the real I/O completion handler */
 	inode_dio_done(inode);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9953d80..3858767 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1683,7 +1683,9 @@
 			data_opt = EXT4_MOUNT_WRITEBACK_DATA;
 		datacheck:
 			if (is_remount) {
-				if (test_opt(sb, DATA_FLAGS) != data_opt) {
+				if (!sbi->s_journal)
+					ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option");
+				else if (test_opt(sb, DATA_FLAGS) != data_opt) {
 					ext4_msg(sb, KERN_ERR,
 						"Cannot change data mode on remount");
 					return 0;
@@ -3099,8 +3101,6 @@
 }
 
 static int ext4_fill_super(struct super_block *sb, void *data, int silent)
-				__releases(kernel_lock)
-				__acquires(kernel_lock)
 {
 	char *orig_data = kstrdup(data, GFP_KERNEL);
 	struct buffer_head *bh;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 04cf3b9..73c3992 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -41,11 +41,23 @@
 	unsigned int for_kupdate:1;
 	unsigned int range_cyclic:1;
 	unsigned int for_background:1;
+	enum wb_reason reason;		/* why was writeback initiated? */
 
 	struct list_head list;		/* pending work list */
 	struct completion *done;	/* set if the caller waits */
 };
 
+const char *wb_reason_name[] = {
+	[WB_REASON_BACKGROUND]		= "background",
+	[WB_REASON_TRY_TO_FREE_PAGES]	= "try_to_free_pages",
+	[WB_REASON_SYNC]		= "sync",
+	[WB_REASON_PERIODIC]		= "periodic",
+	[WB_REASON_LAPTOP_TIMER]	= "laptop_timer",
+	[WB_REASON_FREE_MORE_MEM]	= "free_more_memory",
+	[WB_REASON_FS_FREE_SPACE]	= "fs_free_space",
+	[WB_REASON_FORKER_THREAD]	= "forker_thread"
+};
+
 /*
  * Include the creation of the trace points after defining the
  * wb_writeback_work structure so that the definition remains local to this
@@ -115,7 +127,7 @@
 
 static void
 __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
-		      bool range_cyclic)
+		      bool range_cyclic, enum wb_reason reason)
 {
 	struct wb_writeback_work *work;
 
@@ -135,6 +147,7 @@
 	work->sync_mode	= WB_SYNC_NONE;
 	work->nr_pages	= nr_pages;
 	work->range_cyclic = range_cyclic;
+	work->reason	= reason;
 
 	bdi_queue_work(bdi, work);
 }
@@ -150,9 +163,10 @@
  *   completion. Caller need not hold sb s_umount semaphore.
  *
  */
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+			enum wb_reason reason)
 {
-	__bdi_start_writeback(bdi, nr_pages, true);
+	__bdi_start_writeback(bdi, nr_pages, true, reason);
 }
 
 /**
@@ -251,7 +265,7 @@
  */
 static int move_expired_inodes(struct list_head *delaying_queue,
 			       struct list_head *dispatch_queue,
-			       unsigned long *older_than_this)
+			       struct wb_writeback_work *work)
 {
 	LIST_HEAD(tmp);
 	struct list_head *pos, *node;
@@ -262,8 +276,8 @@
 
 	while (!list_empty(delaying_queue)) {
 		inode = wb_inode(delaying_queue->prev);
-		if (older_than_this &&
-		    inode_dirtied_after(inode, *older_than_this))
+		if (work->older_than_this &&
+		    inode_dirtied_after(inode, *work->older_than_this))
 			break;
 		if (sb && sb != inode->i_sb)
 			do_sb_sort = 1;
@@ -302,13 +316,13 @@
  *                                           |
  *                                           +--> dequeue for IO
  */
-static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
+static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work)
 {
 	int moved;
 	assert_spin_locked(&wb->list_lock);
 	list_splice_init(&wb->b_more_io, &wb->b_io);
-	moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
-	trace_writeback_queue_io(wb, older_than_this, moved);
+	moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, work);
+	trace_writeback_queue_io(wb, work, moved);
 }
 
 static int write_inode(struct inode *inode, struct writeback_control *wbc)
@@ -641,31 +655,40 @@
 	return wrote;
 }
 
-long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages)
+long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
+				enum wb_reason reason)
 {
 	struct wb_writeback_work work = {
 		.nr_pages	= nr_pages,
 		.sync_mode	= WB_SYNC_NONE,
 		.range_cyclic	= 1,
+		.reason		= reason,
 	};
 
 	spin_lock(&wb->list_lock);
 	if (list_empty(&wb->b_io))
-		queue_io(wb, NULL);
+		queue_io(wb, &work);
 	__writeback_inodes_wb(wb, &work);
 	spin_unlock(&wb->list_lock);
 
 	return nr_pages - work.nr_pages;
 }
 
-static inline bool over_bground_thresh(void)
+static bool over_bground_thresh(struct backing_dev_info *bdi)
 {
 	unsigned long background_thresh, dirty_thresh;
 
 	global_dirty_limits(&background_thresh, &dirty_thresh);
 
-	return (global_page_state(NR_FILE_DIRTY) +
-		global_page_state(NR_UNSTABLE_NFS) > background_thresh);
+	if (global_page_state(NR_FILE_DIRTY) +
+	    global_page_state(NR_UNSTABLE_NFS) > background_thresh)
+		return true;
+
+	if (bdi_stat(bdi, BDI_RECLAIMABLE) >
+				bdi_dirty_limit(bdi, background_thresh))
+		return true;
+
+	return false;
 }
 
 /*
@@ -675,7 +698,7 @@
 static void wb_update_bandwidth(struct bdi_writeback *wb,
 				unsigned long start_time)
 {
-	__bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, start_time);
+	__bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time);
 }
 
 /*
@@ -727,7 +750,7 @@
 		 * For background writeout, stop when we are below the
 		 * background dirty threshold
 		 */
-		if (work->for_background && !over_bground_thresh())
+		if (work->for_background && !over_bground_thresh(wb->bdi))
 			break;
 
 		if (work->for_kupdate) {
@@ -738,7 +761,7 @@
 
 		trace_writeback_start(wb->bdi, work);
 		if (list_empty(&wb->b_io))
-			queue_io(wb, work->older_than_this);
+			queue_io(wb, work);
 		if (work->sb)
 			progress = writeback_sb_inodes(work->sb, wb, work);
 		else
@@ -811,13 +834,14 @@
 
 static long wb_check_background_flush(struct bdi_writeback *wb)
 {
-	if (over_bground_thresh()) {
+	if (over_bground_thresh(wb->bdi)) {
 
 		struct wb_writeback_work work = {
 			.nr_pages	= LONG_MAX,
 			.sync_mode	= WB_SYNC_NONE,
 			.for_background	= 1,
 			.range_cyclic	= 1,
+			.reason		= WB_REASON_BACKGROUND,
 		};
 
 		return wb_writeback(wb, &work);
@@ -851,6 +875,7 @@
 			.sync_mode	= WB_SYNC_NONE,
 			.for_kupdate	= 1,
 			.range_cyclic	= 1,
+			.reason		= WB_REASON_PERIODIC,
 		};
 
 		return wb_writeback(wb, &work);
@@ -969,7 +994,7 @@
  * Start writeback of `nr_pages' pages.  If `nr_pages' is zero, write back
  * the whole world.
  */
-void wakeup_flusher_threads(long nr_pages)
+void wakeup_flusher_threads(long nr_pages, enum wb_reason reason)
 {
 	struct backing_dev_info *bdi;
 
@@ -982,7 +1007,7 @@
 	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
 		if (!bdi_has_dirty_io(bdi))
 			continue;
-		__bdi_start_writeback(bdi, nr_pages, false);
+		__bdi_start_writeback(bdi, nr_pages, false, reason);
 	}
 	rcu_read_unlock();
 }
@@ -1203,7 +1228,9 @@
  * on how many (if any) will be written, and this function does not wait
  * for IO completion of submitted IO.
  */
-void writeback_inodes_sb_nr(struct super_block *sb, unsigned long nr)
+void writeback_inodes_sb_nr(struct super_block *sb,
+			    unsigned long nr,
+			    enum wb_reason reason)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 	struct wb_writeback_work work = {
@@ -1212,6 +1239,7 @@
 		.tagged_writepages	= 1,
 		.done			= &done,
 		.nr_pages		= nr,
+		.reason			= reason,
 	};
 
 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
@@ -1228,9 +1256,9 @@
  * on how many (if any) will be written, and this function does not wait
  * for IO completion of submitted IO.
  */
-void writeback_inodes_sb(struct super_block *sb)
+void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
 {
-	return writeback_inodes_sb_nr(sb, get_nr_dirty_pages());
+	return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
 }
 EXPORT_SYMBOL(writeback_inodes_sb);
 
@@ -1241,11 +1269,11 @@
  * Invoke writeback_inodes_sb if no writeback is currently underway.
  * Returns 1 if writeback was started, 0 if not.
  */
-int writeback_inodes_sb_if_idle(struct super_block *sb)
+int writeback_inodes_sb_if_idle(struct super_block *sb, enum wb_reason reason)
 {
 	if (!writeback_in_progress(sb->s_bdi)) {
 		down_read(&sb->s_umount);
-		writeback_inodes_sb(sb);
+		writeback_inodes_sb(sb, reason);
 		up_read(&sb->s_umount);
 		return 1;
 	} else
@@ -1262,11 +1290,12 @@
  * Returns 1 if writeback was started, 0 if not.
  */
 int writeback_inodes_sb_nr_if_idle(struct super_block *sb,
-				   unsigned long nr)
+				   unsigned long nr,
+				   enum wb_reason reason)
 {
 	if (!writeback_in_progress(sb->s_bdi)) {
 		down_read(&sb->s_umount);
-		writeback_inodes_sb_nr(sb, nr);
+		writeback_inodes_sb_nr(sb, nr, reason);
 		up_read(&sb->s_umount);
 		return 1;
 	} else
@@ -1290,6 +1319,7 @@
 		.nr_pages	= LONG_MAX,
 		.range_cyclic	= 0,
 		.done		= &done,
+		.reason		= WB_REASON_SYNC,
 	};
 
 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index b6cca47..3426521 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -47,6 +47,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/stat.h>
+#include <linux/module.h>
 
 #include "fuse_i.h"
 
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 7e823bb..cb23c2b 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -14,6 +14,7 @@
 #include <linux/buffer_head.h>
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
+#include <linux/export.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/gfs2_ondisk.h>
diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c
index e673a88..b1ce4c7 100644
--- a/fs/hfs/trans.c
+++ b/fs/hfs/trans.c
@@ -40,6 +40,8 @@
 
 	src = in->name;
 	srclen = in->len;
+	if (srclen > HFS_NAMELEN)
+		srclen = HFS_NAMELEN;
 	dst = out;
 	dstlen = HFS_MAX_NAMELEN;
 	if (nls_io) {
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 7da2a06..f79dab8 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -21,6 +21,7 @@
  */
 #include <linux/gfp.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/ioprio.h>
 #include <linux/blkdev.h>
 #include <linux/capability.h>
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index de42470..5b6c9d1 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -53,6 +53,78 @@
 	return 0;
 }
 
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ *	If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ *	On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ *	data. On exit, expected to hold the actual size of the compressed
+ *	data.
+ *
+ * Returns: the compression type used.  Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+		unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+	struct jffs2_compressor *this;
+	int err, ret = JFFS2_COMPR_NONE;
+	uint32_t orig_slen, orig_dlen;
+	char *output_buf;
+
+	output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+	if (!output_buf) {
+		printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+		return ret;
+	}
+	orig_slen = *datalen;
+	orig_dlen = *cdatalen;
+	spin_lock(&jffs2_compressor_list_lock);
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		/* Skip decompress-only and disabled modules */
+		if (!this->compress || this->disabled)
+			continue;
+
+		/* Skip if not the desired compression type */
+		if (compr && (compr != this->compr))
+			continue;
+
+		/*
+		 * Either compression type was unspecified, or we found our
+		 * compressor; either way, we're good to go.
+		 */
+		this->usecount++;
+		spin_unlock(&jffs2_compressor_list_lock);
+
+		*datalen  = orig_slen;
+		*cdatalen = orig_dlen;
+		err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+		spin_lock(&jffs2_compressor_list_lock);
+		this->usecount--;
+		if (!err) {
+			/* Success */
+			ret = this->compr;
+			this->stat_compr_blocks++;
+			this->stat_compr_orig_size += *datalen;
+			this->stat_compr_new_size += *cdatalen;
+			break;
+		}
+	}
+	spin_unlock(&jffs2_compressor_list_lock);
+	if (ret == JFFS2_COMPR_NONE)
+		kfree(output_buf);
+	else
+		*cpage_out = output_buf;
+
+	return ret;
+}
+
 /* jffs2_compress:
  * @data_in: Pointer to uncompressed data
  * @cpage_out: Pointer to returned pointer to buffer for compressed data
@@ -76,47 +148,23 @@
 			uint32_t *datalen, uint32_t *cdatalen)
 {
 	int ret = JFFS2_COMPR_NONE;
-	int compr_ret;
+	int mode, compr_ret;
 	struct jffs2_compressor *this, *best=NULL;
 	unsigned char *output_buf = NULL, *tmp_buf;
 	uint32_t orig_slen, orig_dlen;
 	uint32_t best_slen=0, best_dlen=0;
 
-	switch (jffs2_compression_mode) {
+	if (c->mount_opts.override_compr)
+		mode = c->mount_opts.compr;
+	else
+		mode = jffs2_compression_mode;
+
+	switch (mode) {
 	case JFFS2_COMPR_MODE_NONE:
 		break;
 	case JFFS2_COMPR_MODE_PRIORITY:
-		output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-		if (!output_buf) {
-			printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-			goto out;
-		}
-		orig_slen = *datalen;
-		orig_dlen = *cdatalen;
-		spin_lock(&jffs2_compressor_list_lock);
-		list_for_each_entry(this, &jffs2_compressor_list, list) {
-			/* Skip decompress-only backwards-compatibility and disabled modules */
-			if ((!this->compress)||(this->disabled))
-				continue;
-
-			this->usecount++;
-			spin_unlock(&jffs2_compressor_list_lock);
-			*datalen  = orig_slen;
-			*cdatalen = orig_dlen;
-			compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
-			spin_lock(&jffs2_compressor_list_lock);
-			this->usecount--;
-			if (!compr_ret) {
-				ret = this->compr;
-				this->stat_compr_blocks++;
-				this->stat_compr_orig_size += *datalen;
-				this->stat_compr_new_size  += *cdatalen;
-				break;
-			}
-		}
-		spin_unlock(&jffs2_compressor_list_lock);
-		if (ret == JFFS2_COMPR_NONE)
-			kfree(output_buf);
+		ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+				cdatalen);
 		break;
 	case JFFS2_COMPR_MODE_SIZE:
 	case JFFS2_COMPR_MODE_FAVOURLZO:
@@ -174,22 +222,28 @@
 			best->stat_compr_orig_size += best_slen;
 			best->stat_compr_new_size  += best_dlen;
 			ret = best->compr;
+			*cpage_out = output_buf;
 		}
 		spin_unlock(&jffs2_compressor_list_lock);
 		break;
+	case JFFS2_COMPR_MODE_FORCELZO:
+		ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
+	case JFFS2_COMPR_MODE_FORCEZLIB:
+		ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
 	default:
 		printk(KERN_ERR "JFFS2: unknown compression mode.\n");
 	}
- out:
+
 	if (ret == JFFS2_COMPR_NONE) {
 		*cpage_out = data_in;
 		*datalen = *cdatalen;
 		none_stat_compr_blocks++;
 		none_stat_compr_size += *datalen;
 	}
-	else {
-		*cpage_out = output_buf;
-	}
 	return ret;
 }
 
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 13bb759..5e91d57 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -40,6 +40,8 @@
 #define JFFS2_COMPR_MODE_PRIORITY   1
 #define JFFS2_COMPR_MODE_SIZE       2
 #define JFFS2_COMPR_MODE_FAVOURLZO  3
+#define JFFS2_COMPR_MODE_FORCELZO   4
+#define JFFS2_COMPR_MODE_FORCEZLIB  5
 
 #define FAVOUR_LZO_PERCENT 80
 
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 7286e44..4b8afe3 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -379,7 +379,7 @@
 	jffs2_do_setattr(inode, &iattr);
 }
 
-int jffs2_remount_fs (struct super_block *sb, int *flags, char *data)
+int jffs2_do_remount_fs(struct super_block *sb, int *flags, char *data)
 {
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
 
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 0bc6a6c..55a0c1d 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -29,6 +29,11 @@
 
 struct jffs2_inodirty;
 
+struct jffs2_mount_opts {
+	bool override_compr;
+	unsigned int compr;
+};
+
 /* A struct for the overall file system control.  Pointers to
    jffs2_sb_info structs are named `c' in the source code.
    Nee jffs_control
@@ -126,6 +131,7 @@
 #endif
 
 	struct jffs2_summary *summary;		/* Summary information */
+	struct jffs2_mount_opts mount_opts;
 
 #ifdef CONFIG_JFFS2_FS_XATTR
 #define XATTRINDEX_HASHSIZE	(57)
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 6c1755c..ab65ee3 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -176,7 +176,7 @@
 struct inode *jffs2_new_inode (struct inode *dir_i, umode_t mode,
 			       struct jffs2_raw_inode *ri);
 int jffs2_statfs (struct dentry *, struct kstatfs *);
-int jffs2_remount_fs (struct super_block *, int *, char *);
+int jffs2_do_remount_fs(struct super_block *, int *, char *);
 int jffs2_do_fill_super(struct super_block *sb, void *data, int silent);
 void jffs2_gc_release_inode(struct jffs2_sb_info *c,
 			    struct jffs2_inode_info *f);
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 8d8cd34..28107ca 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -275,9 +275,7 @@
 	else
 		c->mtd->unpoint(c->mtd, 0, c->mtd->size);
 #endif
-	if (s)
-		kfree(s);
-
+	kfree(s);
 	return ret;
 }
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 853b8e3..e7e9744 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -17,11 +17,13 @@
 #include <linux/fs.h>
 #include <linux/err.h>
 #include <linux/mount.h>
+#include <linux/parser.h>
 #include <linux/jffs2.h>
 #include <linux/pagemap.h>
 #include <linux/mtd/super.h>
 #include <linux/ctype.h>
 #include <linux/namei.h>
+#include <linux/seq_file.h>
 #include <linux/exportfs.h>
 #include "compr.h"
 #include "nodelist.h"
@@ -75,6 +77,37 @@
 	unlock_super(sb);
 }
 
+static const char *jffs2_compr_name(unsigned int compr)
+{
+	switch (compr) {
+	case JFFS2_COMPR_MODE_NONE:
+		return "none";
+#ifdef CONFIG_JFFS2_LZO
+	case JFFS2_COMPR_MODE_FORCELZO:
+		return "lzo";
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+	case JFFS2_COMPR_MODE_FORCEZLIB:
+		return "zlib";
+#endif
+	default:
+		/* should never happen; programmer error */
+		WARN_ON(1);
+		return "";
+	}
+}
+
+static int jffs2_show_options(struct seq_file *s, struct vfsmount *mnt)
+{
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(mnt->mnt_sb);
+	struct jffs2_mount_opts *opts = &c->mount_opts;
+
+	if (opts->override_compr)
+		seq_printf(s, ",compr=%s", jffs2_compr_name(opts->compr));
+
+	return 0;
+}
+
 static int jffs2_sync_fs(struct super_block *sb, int wait)
 {
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
@@ -133,6 +166,85 @@
 	.fh_to_parent = jffs2_fh_to_parent,
 };
 
+/*
+ * JFFS2 mount options.
+ *
+ * Opt_override_compr: override default compressor
+ * Opt_err: just end of array marker
+ */
+enum {
+	Opt_override_compr,
+	Opt_err,
+};
+
+static const match_table_t tokens = {
+	{Opt_override_compr, "compr=%s"},
+	{Opt_err, NULL},
+};
+
+static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
+{
+	substring_t args[MAX_OPT_ARGS];
+	char *p, *name;
+
+	if (!data)
+		return 0;
+
+	while ((p = strsep(&data, ","))) {
+		int token;
+
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case Opt_override_compr:
+			name = match_strdup(&args[0]);
+
+			if (!name)
+				return -ENOMEM;
+			if (!strcmp(name, "none"))
+				c->mount_opts.compr = JFFS2_COMPR_MODE_NONE;
+#ifdef CONFIG_JFFS2_LZO
+			else if (!strcmp(name, "lzo"))
+				c->mount_opts.compr = JFFS2_COMPR_MODE_FORCELZO;
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+			else if (!strcmp(name, "zlib"))
+				c->mount_opts.compr =
+						JFFS2_COMPR_MODE_FORCEZLIB;
+#endif
+			else {
+				printk(KERN_ERR "JFFS2 Error: unknown compressor \"%s\"",
+						name);
+				kfree(name);
+				return -EINVAL;
+			}
+			kfree(name);
+			c->mount_opts.override_compr = true;
+			break;
+		default:
+			printk(KERN_ERR "JFFS2 Error: unrecognized mount option '%s' or missing value\n",
+					p);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int jffs2_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
+	int err;
+
+	err = jffs2_parse_options(c, data);
+	if (err)
+		return -EINVAL;
+
+	return jffs2_do_remount_fs(sb, flags, data);
+}
+
 static const struct super_operations jffs2_super_operations =
 {
 	.alloc_inode =	jffs2_alloc_inode,
@@ -143,6 +255,7 @@
 	.remount_fs =	jffs2_remount_fs,
 	.evict_inode =	jffs2_evict_inode,
 	.dirty_inode =	jffs2_dirty_inode,
+	.show_options =	jffs2_show_options,
 	.sync_fs =	jffs2_sync_fs,
 };
 
@@ -166,6 +279,12 @@
 	c->os_priv = sb;
 	sb->s_fs_info = c;
 
+	ret = jffs2_parse_options(c, data);
+	if (ret) {
+		kfree(c);
+		return -EINVAL;
+	}
+
 	/* Initialize JFFS2 superblock locks, the further initialization will
 	 * be done later */
 	mutex_init(&c->alloc_sem);
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 4515bea..b09e51d 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -578,8 +578,7 @@
 	if (!jffs2_is_writebuffered(c))
 		return 0;
 
-	if (mutex_trylock(&c->alloc_sem)) {
-		mutex_unlock(&c->alloc_sem);
+	if (!mutex_is_locked(&c->alloc_sem)) {
 		printk(KERN_CRIT "jffs2_flush_wbuf() called with alloc_sem not locked!\n");
 		BUG();
 	}
@@ -1026,7 +1025,7 @@
 	int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 	struct mtd_oob_ops ops;
 
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 	ops.ooblen = NR_OOB_SCAN_PAGES * c->oobavail;
 	ops.oobbuf = c->oobbuf;
 	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -1069,7 +1068,7 @@
 	struct mtd_oob_ops ops;
 	int ret, cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 	ops.ooblen = cmlen;
 	ops.oobbuf = c->oobbuf;
 	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
@@ -1095,7 +1094,7 @@
 	struct mtd_oob_ops ops;
 	int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 
-	ops.mode = MTD_OOB_AUTO;
+	ops.mode = MTD_OPS_AUTO_OOB;
 	ops.ooblen = cmlen;
 	ops.oobbuf = (uint8_t *)&oob_cleanmarker;
 	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index 583636f..cc5f811 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -67,6 +67,7 @@
 #include <linux/buffer_head.h>		/* for sync_blockdev() */
 #include <linux/bio.h>
 #include <linux/freezer.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/seq_file.h>
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index f2697e4..e795c234 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -13,6 +13,7 @@
 #include <linux/bio.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/statfs.h>
 #include <linux/buffer_head.h>
diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c
index 3f32bcb..ef175cb 100644
--- a/fs/minix/bitmap.c
+++ b/fs/minix/bitmap.c
@@ -16,38 +16,26 @@
 #include <linux/bitops.h>
 #include <linux/sched.h>
 
-static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 };
-
 static DEFINE_SPINLOCK(bitmap_lock);
 
-static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits)
+/*
+ * bitmap consists of blocks filled with 16bit words
+ * bit set == busy, bit clear == free
+ * endianness is a mess, but for counting zero bits it really doesn't matter...
+ */
+static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits)
 {
-	unsigned i, j, sum = 0;
-	struct buffer_head *bh;
-  
-	for (i=0; i<numblocks-1; i++) {
-		if (!(bh=map[i])) 
-			return(0);
-		for (j=0; j<bh->b_size; j++)
-			sum += nibblemap[bh->b_data[j] & 0xf]
-				+ nibblemap[(bh->b_data[j]>>4) & 0xf];
+	__u32 sum = 0;
+	unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8);
+
+	while (blocks--) {
+		unsigned words = blocksize / 2;
+		__u16 *p = (__u16 *)(*map++)->b_data;
+		while (words--)
+			sum += 16 - hweight16(*p++);
 	}
 
-	if (numblocks==0 || !(bh=map[numblocks-1]))
-		return(0);
-	i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2;
-	for (j=0; j<i; j++) {
-		sum += nibblemap[bh->b_data[j] & 0xf]
-			+ nibblemap[(bh->b_data[j]>>4) & 0xf];
-	}
-
-	i = numbits%16;
-	if (i!=0) {
-		i = *(__u16 *)(&bh->b_data[j]) | ~((1<<i) - 1);
-		sum += nibblemap[i & 0xf] + nibblemap[(i>>4) & 0xf];
-		sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf];
-	}
-	return(sum);
+	return sum;
 }
 
 void minix_free_block(struct inode *inode, unsigned long block)
@@ -105,10 +93,12 @@
 	return 0;
 }
 
-unsigned long minix_count_free_blocks(struct minix_sb_info *sbi)
+unsigned long minix_count_free_blocks(struct super_block *sb)
 {
-	return (count_free(sbi->s_zmap, sbi->s_zmap_blocks,
-		sbi->s_nzones - sbi->s_firstdatazone + 1)
+	struct minix_sb_info *sbi = minix_sb(sb);
+	u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1);
+
+	return (count_free(sbi->s_zmap, sb->s_blocksize, bits)
 		<< sbi->s_log_zone_size);
 }
 
@@ -273,7 +263,10 @@
 	return inode;
 }
 
-unsigned long minix_count_free_inodes(struct minix_sb_info *sbi)
+unsigned long minix_count_free_inodes(struct super_block *sb)
 {
-	return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1);
+	struct minix_sb_info *sbi = minix_sb(sb);
+	u32 bits = sbi->s_ninodes + 1;
+
+	return count_free(sbi->s_imap, sb->s_blocksize, bits);
 }
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 64cdcd6..1d9e339 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -279,6 +279,27 @@
  	else if (sbi->s_mount_state & MINIX_ERROR_FS)
 		printk("MINIX-fs: mounting file system with errors, "
 			"running fsck is recommended\n");
+
+	/* Apparently minix can create filesystems that allocate more blocks for
+	 * the bitmaps than needed.  We simply ignore that, but verify it didn't
+	 * create one with not enough blocks and bail out if so.
+	 */
+	block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize);
+	if (sbi->s_imap_blocks < block) {
+		printk("MINIX-fs: file system does not have enough "
+				"imap blocks allocated.  Refusing to mount\n");
+		goto out_iput;
+	}
+
+	block = minix_blocks_needed(
+			(sbi->s_nzones - (sbi->s_firstdatazone + 1)),
+			s->s_blocksize);
+	if (sbi->s_zmap_blocks < block) {
+		printk("MINIX-fs: file system does not have enough "
+				"zmap blocks allocated.  Refusing to mount.\n");
+		goto out_iput;
+	}
+
 	return 0;
 
 out_iput:
@@ -339,10 +360,10 @@
 	buf->f_type = sb->s_magic;
 	buf->f_bsize = sb->s_blocksize;
 	buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size;
-	buf->f_bfree = minix_count_free_blocks(sbi);
+	buf->f_bfree = minix_count_free_blocks(sb);
 	buf->f_bavail = buf->f_bfree;
 	buf->f_files = sbi->s_ninodes;
-	buf->f_ffree = minix_count_free_inodes(sbi);
+	buf->f_ffree = minix_count_free_inodes(sb);
 	buf->f_namelen = sbi->s_namelen;
 	buf->f_fsid.val[0] = (u32)id;
 	buf->f_fsid.val[1] = (u32)(id >> 32);
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 341e212..26bbd55 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -48,10 +48,10 @@
 extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **);
 extern struct inode * minix_new_inode(const struct inode *, int, int *);
 extern void minix_free_inode(struct inode * inode);
-extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_inodes(struct super_block *sb);
 extern int minix_new_block(struct inode * inode);
 extern void minix_free_block(struct inode *inode, unsigned long block);
-extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_blocks(struct super_block *sb);
 extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
 
@@ -88,6 +88,11 @@
 	return list_entry(inode, struct minix_inode_info, vfs_inode);
 }
 
+static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize)
+{
+	return DIV_ROUND_UP(bits, blocksize * 8);
+}
+
 #if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \
 	defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED)
 
@@ -125,7 +130,7 @@
 	if (!size)
 		return 0;
 
-	size = (size >> 4) + ((size & 15) > 0);
+	size >>= 4;
 	while (*p++ == 0xffff) {
 		if (--size == 0)
 			return (p - addr) << 4;
diff --git a/fs/namei.c b/fs/namei.c
index ac6d214..5008f01 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -852,7 +852,7 @@
 		mntput(path->mnt);
 	if (ret == -EISDIR)
 		ret = 0;
-	return ret;
+	return ret < 0 ? ret : need_mntput;
 }
 
 int follow_down_one(struct path *path)
@@ -900,6 +900,7 @@
 			break;
 		path->mnt = mounted;
 		path->dentry = mounted->mnt_root;
+		nd->flags |= LOOKUP_JUMPED;
 		nd->seq = read_seqcount_begin(&path->dentry->d_seq);
 		/*
 		 * Update the inode too. We don't need to re-check the
@@ -1213,6 +1214,8 @@
 		path_put_conditional(path, nd);
 		return err;
 	}
+	if (err)
+		nd->flags |= LOOKUP_JUMPED;
 	*inode = path->dentry->d_inode;
 	return 0;
 }
@@ -2146,6 +2149,10 @@
 	}
 
 	/* create side of things */
+	/*
+	 * This will *only* deal with leaving RCU mode - LOOKUP_JUMPED has been
+	 * cleared when we got to the last component we are about to look up
+	 */
 	error = complete_walk(nd);
 	if (error)
 		return ERR_PTR(error);
@@ -2214,6 +2221,9 @@
 	if (error < 0)
 		goto exit_dput;
 
+	if (error)
+		nd->flags |= LOOKUP_JUMPED;
+
 	error = -ENOENT;
 	if (!path->dentry->d_inode)
 		goto exit_dput;
@@ -2223,6 +2233,10 @@
 
 	path_to_nameidata(path, nd);
 	nd->inode = path->dentry->d_inode;
+	/* Why this, you ask?  _Now_ we might have grown LOOKUP_JUMPED... */
+	error = complete_walk(nd);
+	if (error)
+		goto exit;
 	error = -EISDIR;
 	if (S_ISDIR(nd->inode->i_mode))
 		goto exit;
diff --git a/fs/namespace.c b/fs/namespace.c
index e5e1c7d..6d3a196 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2483,11 +2483,43 @@
 		__mnt_make_longterm(mnt);
 		new_ns->root = mnt;
 		list_add(&new_ns->list, &new_ns->root->mnt_list);
+	} else {
+		mntput(mnt);
 	}
 	return new_ns;
 }
 EXPORT_SYMBOL(create_mnt_ns);
 
+struct dentry *mount_subtree(struct vfsmount *mnt, const char *name)
+{
+	struct mnt_namespace *ns;
+	struct super_block *s;
+	struct path path;
+	int err;
+
+	ns = create_mnt_ns(mnt);
+	if (IS_ERR(ns))
+		return ERR_CAST(ns);
+
+	err = vfs_path_lookup(mnt->mnt_root, mnt,
+			name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+
+	put_mnt_ns(ns);
+
+	if (err)
+		return ERR_PTR(err);
+
+	/* trade a vfsmount reference for active sb one */
+	s = path.mnt->mnt_sb;
+	atomic_inc(&s->s_active);
+	mntput(path.mnt);
+	/* lock the sucker */
+	down_write(&s->s_umount);
+	/* ... and return the root of (sub)tree on it */
+	return path.dentry;
+}
+EXPORT_SYMBOL(mount_subtree);
+
 SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
 		char __user *, type, unsigned long, flags, void __user *, data)
 {
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 918ad64..726e59a 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -488,17 +488,18 @@
 				      struct xdr_stream *xdr,
 				      struct cb_recallanyargs *args)
 {
-	__be32 *p;
+	uint32_t bitmap[2];
+	__be32 *p, status;
 
 	args->craa_addr = svc_addr(rqstp);
 	p = read_buf(xdr, 4);
 	if (unlikely(p == NULL))
 		return htonl(NFS4ERR_BADXDR);
 	args->craa_objs_to_keep = ntohl(*p++);
-	p = read_buf(xdr, 4);
-	if (unlikely(p == NULL))
-		return htonl(NFS4ERR_BADXDR);
-	args->craa_type_mask = ntohl(*p);
+	status = decode_bitmap(xdr, bitmap);
+	if (unlikely(status))
+		return status;
+	args->craa_type_mask = bitmap[0];
 
 	return 0;
 }
@@ -986,4 +987,5 @@
 	.vs_proc = nfs4_callback_procedures1,
 	.vs_xdrsize = NFS4_CALLBACK_XDRSIZE,
 	.vs_dispatch = NULL,
+	.vs_hidden = 1,
 };
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index b238d95..ac28990 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1468,12 +1468,12 @@
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
+			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
-			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				res = ERR_CAST(inode);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 91c01f0..eca56d4 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -40,48 +40,8 @@
 
 #define NFSDBG_FACILITY		NFSDBG_FILE
 
-static int nfs_file_open(struct inode *, struct file *);
-static int nfs_file_release(struct inode *, struct file *);
-static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin);
-static int  nfs_file_mmap(struct file *, struct vm_area_struct *);
-static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos,
-					struct pipe_inode_info *pipe,
-					size_t count, unsigned int flags);
-static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov,
-				unsigned long nr_segs, loff_t pos);
-static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
-					struct file *filp, loff_t *ppos,
-					size_t count, unsigned int flags);
-static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov,
-				unsigned long nr_segs, loff_t pos);
-static int  nfs_file_flush(struct file *, fl_owner_t id);
-static int  nfs_file_fsync(struct file *, loff_t, loff_t, int datasync);
-static int nfs_check_flags(int flags);
-static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl);
-static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
-static int nfs_setlease(struct file *file, long arg, struct file_lock **fl);
-
 static const struct vm_operations_struct nfs_file_vm_ops;
 
-const struct file_operations nfs_file_operations = {
-	.llseek		= nfs_file_llseek,
-	.read		= do_sync_read,
-	.write		= do_sync_write,
-	.aio_read	= nfs_file_read,
-	.aio_write	= nfs_file_write,
-	.mmap		= nfs_file_mmap,
-	.open		= nfs_file_open,
-	.flush		= nfs_file_flush,
-	.release	= nfs_file_release,
-	.fsync		= nfs_file_fsync,
-	.lock		= nfs_lock,
-	.flock		= nfs_flock,
-	.splice_read	= nfs_file_splice_read,
-	.splice_write	= nfs_file_splice_write,
-	.check_flags	= nfs_check_flags,
-	.setlease	= nfs_setlease,
-};
-
 const struct inode_operations nfs_file_inode_operations = {
 	.permission	= nfs_permission,
 	.getattr	= nfs_getattr,
@@ -137,11 +97,9 @@
 static int
 nfs_file_release(struct inode *inode, struct file *filp)
 {
-	struct dentry *dentry = filp->f_path.dentry;
-
 	dprintk("NFS: release(%s/%s)\n",
-			dentry->d_parent->d_name.name,
-			dentry->d_name.name);
+			filp->f_path.dentry->d_parent->d_name.name,
+			filp->f_path.dentry->d_name.name);
 
 	nfs_inc_stats(inode, NFSIOS_VFSRELEASE);
 	return nfs_release(inode, filp);
@@ -228,14 +186,13 @@
 	struct dentry * dentry = iocb->ki_filp->f_path.dentry;
 	struct inode * inode = dentry->d_inode;
 	ssize_t result;
-	size_t count = iov_length(iov, nr_segs);
 
 	if (iocb->ki_filp->f_flags & O_DIRECT)
 		return nfs_file_direct_read(iocb, iov, nr_segs, pos);
 
 	dprintk("NFS: read(%s/%s, %lu@%lu)\n",
 		dentry->d_parent->d_name.name, dentry->d_name.name,
-		(unsigned long) count, (unsigned long) pos);
+		(unsigned long) iov_length(iov, nr_segs), (unsigned long) pos);
 
 	result = nfs_revalidate_mapping(inode, iocb->ki_filp->f_mapping);
 	if (!result) {
@@ -889,3 +846,54 @@
 			file->f_path.dentry->d_name.name, arg);
 	return -EINVAL;
 }
+
+const struct file_operations nfs_file_operations = {
+	.llseek		= nfs_file_llseek,
+	.read		= do_sync_read,
+	.write		= do_sync_write,
+	.aio_read	= nfs_file_read,
+	.aio_write	= nfs_file_write,
+	.mmap		= nfs_file_mmap,
+	.open		= nfs_file_open,
+	.flush		= nfs_file_flush,
+	.release	= nfs_file_release,
+	.fsync		= nfs_file_fsync,
+	.lock		= nfs_lock,
+	.flock		= nfs_flock,
+	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
+	.check_flags	= nfs_check_flags,
+	.setlease	= nfs_setlease,
+};
+
+#ifdef CONFIG_NFS_V4
+static int
+nfs4_file_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to
+	 * this point, then something is very wrong
+	 */
+	dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp);
+	return -ENOTDIR;
+}
+
+const struct file_operations nfs4_file_operations = {
+	.llseek		= nfs_file_llseek,
+	.read		= do_sync_read,
+	.write		= do_sync_write,
+	.aio_read	= nfs_file_read,
+	.aio_write	= nfs_file_write,
+	.mmap		= nfs_file_mmap,
+	.open		= nfs4_file_open,
+	.flush		= nfs_file_flush,
+	.release	= nfs_file_release,
+	.fsync		= nfs_file_fsync,
+	.lock		= nfs_lock,
+	.flock		= nfs_flock,
+	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
+	.check_flags	= nfs_check_flags,
+	.setlease	= nfs_setlease,
+};
+#endif /* CONFIG_NFS_V4 */
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index c07a55a..50a15fa 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -291,7 +291,7 @@
 		 */
 		inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops;
 		if (S_ISREG(inode->i_mode)) {
-			inode->i_fop = &nfs_file_operations;
+			inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops;
 			inode->i_data.a_ops = &nfs_file_aops;
 			inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info;
 		} else if (S_ISDIR(inode->i_mode)) {
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index c1a1bd8..3f4d957 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -299,6 +299,8 @@
 extern int nfs_generic_pagein(struct nfs_pageio_descriptor *desc,
 		struct list_head *head);
 
+extern void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
+		struct inode *inode);
 extern void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio);
 extern void nfs_readdata_release(struct nfs_read_data *rdata);
 
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 85f1690..d4bc9ed9 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -853,6 +853,7 @@
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs3_dir_inode_operations,
 	.file_inode_ops	= &nfs3_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs3_proc_get_root,
 	.getattr	= nfs3_proc_getattr,
 	.setattr	= nfs3_proc_setattr,
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index 0911941..a62d36b 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -31,6 +31,7 @@
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
+#include <linux/module.h>
 
 #include "internal.h"
 #include "nfs4filelayout.h"
@@ -449,9 +450,8 @@
 
 	fl->dsaddr = dsaddr;
 
-	if (fl->first_stripe_index < 0 ||
-	    fl->first_stripe_index >= dsaddr->stripe_count) {
-		dprintk("%s Bad first_stripe_index %d\n",
+	if (fl->first_stripe_index >= dsaddr->stripe_count) {
+		dprintk("%s Bad first_stripe_index %u\n",
 				__func__, fl->first_stripe_index);
 		goto out_put;
 	}
@@ -552,7 +552,7 @@
 
 	/* Note that a zero value for num_fh is legal for STRIPE_SPARSE.
 	 * Futher checking is done in filelayout_check_layout */
-	if (fl->num_fh < 0 || fl->num_fh >
+	if (fl->num_fh >
 	    max(NFS4_PNFS_MAX_STRIPE_CNT, NFS4_PNFS_MAX_MULTI_CNT))
 		goto out_err;
 
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d2ae413..be2bbac 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2464,8 +2464,7 @@
 		case -NFS4ERR_BADNAME:
 			return -ENOENT;
 		case -NFS4ERR_MOVED:
-			err = nfs4_get_referral(dir, name, fattr, fhandle);
-			break;
+			return nfs4_get_referral(dir, name, fattr, fhandle);
 		case -NFS4ERR_WRONGSEC:
 			nfs_fixup_secinfo_attributes(fattr, fhandle);
 		}
@@ -5950,6 +5949,7 @@
 {
 	struct nfs4_layoutcommit_data *data = calldata;
 	struct pnfs_layout_segment *lseg, *tmp;
+	unsigned long *bitlock = &NFS_I(data->args.inode)->flags;
 
 	pnfs_cleanup_layoutcommit(data);
 	/* Matched by references in pnfs_set_layoutcommit */
@@ -5959,6 +5959,11 @@
 				       &lseg->pls_flags))
 			put_lseg(lseg);
 	}
+
+	clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
+	smp_mb__after_clear_bit();
+	wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
+
 	put_rpccred(data->cred);
 	kfree(data);
 }
@@ -6247,6 +6252,7 @@
 	.dentry_ops	= &nfs4_dentry_operations,
 	.dir_inode_ops	= &nfs4_dir_inode_operations,
 	.file_inode_ops	= &nfs4_file_inode_operations,
+	.file_ops	= &nfs4_file_operations,
 	.getroot	= nfs4_proc_get_root,
 	.getattr	= nfs4_proc_getattr,
 	.setattr	= nfs4_proc_setattr,
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 1dce12f..e6161b2 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -6602,8 +6602,6 @@
 	if (status)
 		goto out;
 	status = decode_secinfo(xdr, res);
-	if (status)
-		goto out;
 out:
 	return status;
 }
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index d0cda12..c807ab9 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -38,21 +38,15 @@
  */
 
 #include <linux/module.h>
-#include <scsi/osd_initiator.h>
+#include <scsi/osd_ore.h>
 
 #include "objlayout.h"
 
 #define NFSDBG_FACILITY         NFSDBG_PNFS_LD
 
-#define _LLU(x) ((unsigned long long)x)
-
-enum { BIO_MAX_PAGES_KMALLOC =
-		(PAGE_SIZE - sizeof(struct bio)) / sizeof(struct bio_vec),
-};
-
 struct objio_dev_ent {
 	struct nfs4_deviceid_node id_node;
-	struct osd_dev *od;
+	struct ore_dev od;
 };
 
 static void
@@ -60,8 +54,8 @@
 {
 	struct objio_dev_ent *de = container_of(d, struct objio_dev_ent, id_node);
 
-	dprintk("%s: free od=%p\n", __func__, de->od);
-	osduld_put_device(de->od);
+	dprintk("%s: free od=%p\n", __func__, de->od.od);
+	osduld_put_device(de->od.od);
 	kfree(de);
 }
 
@@ -98,12 +92,12 @@
 				nfss->pnfs_curr_ld,
 				nfss->nfs_client,
 				d_id);
-	de->od = od;
+	de->od.od = od;
 
 	d = nfs4_insert_deviceid_node(&de->id_node);
 	n = container_of(d, struct objio_dev_ent, id_node);
 	if (n != de) {
-		dprintk("%s: Race with other n->od=%p\n", __func__, n->od);
+		dprintk("%s: Race with other n->od=%p\n", __func__, n->od.od);
 		objio_free_deviceid_node(&de->id_node);
 		de = n;
 	}
@@ -111,28 +105,11 @@
 	return de;
 }
 
-struct caps_buffers {
-	u8 caps_key[OSD_CRYPTO_KEYID_SIZE];
-	u8 creds[OSD_CAP_LEN];
-};
-
 struct objio_segment {
 	struct pnfs_layout_segment lseg;
 
-	struct pnfs_osd_object_cred *comps;
-
-	unsigned mirrors_p1;
-	unsigned stripe_unit;
-	unsigned group_width;	/* Data stripe_units without integrity comps */
-	u64 group_depth;
-	unsigned group_count;
-
-	unsigned max_io_size;
-
-	unsigned comps_index;
-	unsigned num_comps;
-	/* variable length */
-	struct objio_dev_ent *ods[];
+	struct ore_layout layout;
+	struct ore_components oc;
 };
 
 static inline struct objio_segment *
@@ -141,59 +118,44 @@
 	return container_of(lseg, struct objio_segment, lseg);
 }
 
-struct objio_state;
-typedef ssize_t (*objio_done_fn)(struct objio_state *ios);
-
 struct objio_state {
 	/* Generic layer */
-	struct objlayout_io_state ol_state;
+	struct objlayout_io_res oir;
 
-	struct objio_segment *layout;
-
-	struct kref kref;
-	objio_done_fn done;
-	void *private;
-
-	unsigned long length;
-	unsigned numdevs; /* Actually used devs in this IO */
-	/* A per-device variable array of size numdevs */
-	struct _objio_per_comp {
-		struct bio *bio;
-		struct osd_request *or;
-		unsigned long length;
-		u64 offset;
-		unsigned dev;
-	} per_dev[];
+	bool sync;
+	/*FIXME: Support for extra_bytes at ore_get_rw_state() */
+	struct ore_io_state *ios;
 };
 
 /* Send and wait for a get_device_info of devices in the layout,
    then look them up with the osd_initiator library */
-static struct objio_dev_ent *_device_lookup(struct pnfs_layout_hdr *pnfslay,
-				struct objio_segment *objio_seg, unsigned comp,
-				gfp_t gfp_flags)
+static int objio_devices_lookup(struct pnfs_layout_hdr *pnfslay,
+	struct objio_segment *objio_seg, unsigned c, struct nfs4_deviceid *d_id,
+	gfp_t gfp_flags)
 {
 	struct pnfs_osd_deviceaddr *deviceaddr;
-	struct nfs4_deviceid *d_id;
 	struct objio_dev_ent *ode;
 	struct osd_dev *od;
 	struct osd_dev_info odi;
 	int err;
 
-	d_id = &objio_seg->comps[comp].oc_object_id.oid_device_id;
-
 	ode = _dev_list_find(NFS_SERVER(pnfslay->plh_inode), d_id);
-	if (ode)
-		return ode;
+	if (ode) {
+		objio_seg->oc.ods[c] = &ode->od; /* must use container_of */
+		return 0;
+	}
 
 	err = objlayout_get_deviceinfo(pnfslay, d_id, &deviceaddr, gfp_flags);
 	if (unlikely(err)) {
 		dprintk("%s: objlayout_get_deviceinfo dev(%llx:%llx) =>%d\n",
 			__func__, _DEVID_LO(d_id), _DEVID_HI(d_id), err);
-		return ERR_PTR(err);
+		return err;
 	}
 
 	odi.systemid_len = deviceaddr->oda_systemid.len;
 	if (odi.systemid_len > sizeof(odi.systemid)) {
+		dprintk("%s: odi.systemid_len > sizeof(systemid=%zd)\n",
+			__func__, sizeof(odi.systemid));
 		err = -EINVAL;
 		goto out;
 	} else if (odi.systemid_len)
@@ -218,94 +180,51 @@
 
 	ode = _dev_list_add(NFS_SERVER(pnfslay->plh_inode), d_id, od,
 			    gfp_flags);
-
+	objio_seg->oc.ods[c] = &ode->od; /* must use container_of */
+	dprintk("Adding new dev_id(%llx:%llx)\n",
+		_DEVID_LO(d_id), _DEVID_HI(d_id));
 out:
-	dprintk("%s: return=%d\n", __func__, err);
 	objlayout_put_deviceinfo(deviceaddr);
-	return err ? ERR_PTR(err) : ode;
-}
-
-static int objio_devices_lookup(struct pnfs_layout_hdr *pnfslay,
-	struct objio_segment *objio_seg,
-	gfp_t gfp_flags)
-{
-	unsigned i;
-	int err;
-
-	/* lookup all devices */
-	for (i = 0; i < objio_seg->num_comps; i++) {
-		struct objio_dev_ent *ode;
-
-		ode = _device_lookup(pnfslay, objio_seg, i, gfp_flags);
-		if (unlikely(IS_ERR(ode))) {
-			err = PTR_ERR(ode);
-			goto out;
-		}
-		objio_seg->ods[i] = ode;
-	}
-	err = 0;
-
-out:
-	dprintk("%s: return=%d\n", __func__, err);
 	return err;
 }
 
-static int _verify_data_map(struct pnfs_osd_layout *layout)
+static void copy_single_comp(struct ore_components *oc, unsigned c,
+			     struct pnfs_osd_object_cred *src_comp)
 {
-	struct pnfs_osd_data_map *data_map = &layout->olo_map;
-	u64 stripe_length;
-	u32 group_width;
+	struct ore_comp *ocomp = &oc->comps[c];
 
-/* FIXME: Only raid0 for now. if not go through MDS */
-	if (data_map->odm_raid_algorithm != PNFS_OSD_RAID_0) {
-		printk(KERN_ERR "Only RAID_0 for now\n");
-		return -ENOTSUPP;
-	}
-	if (0 != (data_map->odm_num_comps % (data_map->odm_mirror_cnt + 1))) {
-		printk(KERN_ERR "Data Map wrong, num_comps=%u mirrors=%u\n",
-			  data_map->odm_num_comps, data_map->odm_mirror_cnt);
-		return -EINVAL;
-	}
+	WARN_ON(src_comp->oc_cap_key.cred_len > 0); /* libosd is NO_SEC only */
+	WARN_ON(src_comp->oc_cap.cred_len > sizeof(ocomp->cred));
 
-	if (data_map->odm_group_width)
-		group_width = data_map->odm_group_width;
-	else
-		group_width = data_map->odm_num_comps /
-						(data_map->odm_mirror_cnt + 1);
+	ocomp->obj.partition = src_comp->oc_object_id.oid_partition_id;
+	ocomp->obj.id = src_comp->oc_object_id.oid_object_id;
 
-	stripe_length = (u64)data_map->odm_stripe_unit * group_width;
-	if (stripe_length >= (1ULL << 32)) {
-		printk(KERN_ERR "Total Stripe length(0x%llx)"
-			  " >= 32bit is not supported\n", _LLU(stripe_length));
-		return -ENOTSUPP;
-	}
-
-	if (0 != (data_map->odm_stripe_unit & ~PAGE_MASK)) {
-		printk(KERN_ERR "Stripe Unit(0x%llx)"
-			  " must be Multples of PAGE_SIZE(0x%lx)\n",
-			  _LLU(data_map->odm_stripe_unit), PAGE_SIZE);
-		return -ENOTSUPP;
-	}
-
-	return 0;
+	memcpy(ocomp->cred, src_comp->oc_cap.cred, sizeof(ocomp->cred));
 }
 
-static void copy_single_comp(struct pnfs_osd_object_cred *cur_comp,
-			     struct pnfs_osd_object_cred *src_comp,
-			     struct caps_buffers *caps_p)
+int __alloc_objio_seg(unsigned numdevs, gfp_t gfp_flags,
+		       struct objio_segment **pseg)
 {
-	WARN_ON(src_comp->oc_cap_key.cred_len > sizeof(caps_p->caps_key));
-	WARN_ON(src_comp->oc_cap.cred_len > sizeof(caps_p->creds));
+	struct __alloc_objio_segment {
+		struct objio_segment olseg;
+		struct ore_dev *ods[numdevs];
+		struct ore_comp	comps[numdevs];
+	} *aolseg;
 
-	*cur_comp = *src_comp;
+	aolseg = kzalloc(sizeof(*aolseg), gfp_flags);
+	if (unlikely(!aolseg)) {
+		dprintk("%s: Faild allocation numdevs=%d size=%zd\n", __func__,
+			numdevs, sizeof(*aolseg));
+		return -ENOMEM;
+	}
 
-	memcpy(caps_p->caps_key, src_comp->oc_cap_key.cred,
-	       sizeof(caps_p->caps_key));
-	cur_comp->oc_cap_key.cred = caps_p->caps_key;
+	aolseg->olseg.oc.numdevs = numdevs;
+	aolseg->olseg.oc.single_comp = EC_MULTPLE_COMPS;
+	aolseg->olseg.oc.comps = aolseg->comps;
+	aolseg->olseg.oc.ods = aolseg->ods;
 
-	memcpy(caps_p->creds, src_comp->oc_cap.cred,
-	       sizeof(caps_p->creds));
-	cur_comp->oc_cap.cred = caps_p->creds;
+	*pseg = &aolseg->olseg;
+	return 0;
 }
 
 int objio_alloc_lseg(struct pnfs_layout_segment **outp,
@@ -317,59 +236,43 @@
 	struct objio_segment *objio_seg;
 	struct pnfs_osd_xdr_decode_layout_iter iter;
 	struct pnfs_osd_layout layout;
-	struct pnfs_osd_object_cred *cur_comp, src_comp;
-	struct caps_buffers *caps_p;
+	struct pnfs_osd_object_cred src_comp;
+	unsigned cur_comp;
 	int err;
 
 	err = pnfs_osd_xdr_decode_layout_map(&layout, &iter, xdr);
 	if (unlikely(err))
 		return err;
 
-	err = _verify_data_map(&layout);
+	err = __alloc_objio_seg(layout.olo_num_comps, gfp_flags, &objio_seg);
 	if (unlikely(err))
 		return err;
 
-	objio_seg = kzalloc(sizeof(*objio_seg) +
-			    sizeof(objio_seg->ods[0]) * layout.olo_num_comps +
-			    sizeof(*objio_seg->comps) * layout.olo_num_comps +
-			    sizeof(struct caps_buffers) * layout.olo_num_comps,
-			    gfp_flags);
-	if (!objio_seg)
-		return -ENOMEM;
+	objio_seg->layout.stripe_unit = layout.olo_map.odm_stripe_unit;
+	objio_seg->layout.group_width = layout.olo_map.odm_group_width;
+	objio_seg->layout.group_depth = layout.olo_map.odm_group_depth;
+	objio_seg->layout.mirrors_p1 = layout.olo_map.odm_mirror_cnt + 1;
+	objio_seg->layout.raid_algorithm = layout.olo_map.odm_raid_algorithm;
 
-	objio_seg->comps = (void *)(objio_seg->ods + layout.olo_num_comps);
-	cur_comp = objio_seg->comps;
-	caps_p = (void *)(cur_comp + layout.olo_num_comps);
-	while (pnfs_osd_xdr_decode_layout_comp(&src_comp, &iter, xdr, &err))
-		copy_single_comp(cur_comp++, &src_comp, caps_p++);
+	err = ore_verify_layout(layout.olo_map.odm_num_comps,
+					  &objio_seg->layout);
 	if (unlikely(err))
 		goto err;
 
-	objio_seg->num_comps = layout.olo_num_comps;
-	objio_seg->comps_index = layout.olo_comps_index;
-	err = objio_devices_lookup(pnfslay, objio_seg, gfp_flags);
-	if (err)
-		goto err;
-
-	objio_seg->mirrors_p1 = layout.olo_map.odm_mirror_cnt + 1;
-	objio_seg->stripe_unit = layout.olo_map.odm_stripe_unit;
-	if (layout.olo_map.odm_group_width) {
-		objio_seg->group_width = layout.olo_map.odm_group_width;
-		objio_seg->group_depth = layout.olo_map.odm_group_depth;
-		objio_seg->group_count = layout.olo_map.odm_num_comps /
-						objio_seg->mirrors_p1 /
-						objio_seg->group_width;
-	} else {
-		objio_seg->group_width = layout.olo_map.odm_num_comps /
-						objio_seg->mirrors_p1;
-		objio_seg->group_depth = -1;
-		objio_seg->group_count = 1;
+	objio_seg->oc.first_dev = layout.olo_comps_index;
+	cur_comp = 0;
+	while (pnfs_osd_xdr_decode_layout_comp(&src_comp, &iter, xdr, &err)) {
+		copy_single_comp(&objio_seg->oc, cur_comp, &src_comp);
+		err = objio_devices_lookup(pnfslay, objio_seg, cur_comp,
+					   &src_comp.oc_object_id.oid_device_id,
+					   gfp_flags);
+		if (err)
+			goto err;
+		++cur_comp;
 	}
-
-	/* Cache this calculation it will hit for every page */
-	objio_seg->max_io_size = (BIO_MAX_PAGES_KMALLOC * PAGE_SIZE -
-				  objio_seg->stripe_unit) *
-				 objio_seg->group_width;
+	/* pnfs_osd_xdr_decode_layout_comp returns false on error */
+	if (unlikely(err))
+		goto err;
 
 	*outp = &objio_seg->lseg;
 	return 0;
@@ -386,43 +289,63 @@
 	int i;
 	struct objio_segment *objio_seg = OBJIO_LSEG(lseg);
 
-	for (i = 0; i < objio_seg->num_comps; i++) {
-		if (!objio_seg->ods[i])
+	for (i = 0; i < objio_seg->oc.numdevs; i++) {
+		struct ore_dev *od = objio_seg->oc.ods[i];
+		struct objio_dev_ent *ode;
+
+		if (!od)
 			break;
-		nfs4_put_deviceid_node(&objio_seg->ods[i]->id_node);
+		ode = container_of(od, typeof(*ode), od);
+		nfs4_put_deviceid_node(&ode->id_node);
 	}
 	kfree(objio_seg);
 }
 
-int objio_alloc_io_state(struct pnfs_layout_segment *lseg,
-			 struct objlayout_io_state **outp,
-			 gfp_t gfp_flags)
+static int
+objio_alloc_io_state(struct pnfs_layout_hdr *pnfs_layout_type, bool is_reading,
+	struct pnfs_layout_segment *lseg, struct page **pages, unsigned pgbase,
+	loff_t offset, size_t count, void *rpcdata, gfp_t gfp_flags,
+	struct objio_state **outp)
 {
 	struct objio_segment *objio_seg = OBJIO_LSEG(lseg);
-	struct objio_state *ios;
-	const unsigned first_size = sizeof(*ios) +
-				objio_seg->num_comps * sizeof(ios->per_dev[0]);
-	const unsigned sec_size = objio_seg->num_comps *
-						sizeof(ios->ol_state.ioerrs[0]);
+	struct ore_io_state *ios;
+	int ret;
+	struct __alloc_objio_state {
+		struct objio_state objios;
+		struct pnfs_osd_ioerr ioerrs[objio_seg->oc.numdevs];
+	} *aos;
 
-	ios = kzalloc(first_size + sec_size, gfp_flags);
-	if (unlikely(!ios))
+	aos = kzalloc(sizeof(*aos), gfp_flags);
+	if (unlikely(!aos))
 		return -ENOMEM;
 
-	ios->layout = objio_seg;
-	ios->ol_state.ioerrs = ((void *)ios) + first_size;
-	ios->ol_state.num_comps = objio_seg->num_comps;
+	objlayout_init_ioerrs(&aos->objios.oir, objio_seg->oc.numdevs,
+			aos->ioerrs, rpcdata, pnfs_layout_type);
 
-	*outp = &ios->ol_state;
+	ret = ore_get_rw_state(&objio_seg->layout, &objio_seg->oc, is_reading,
+			       offset, count, &ios);
+	if (unlikely(ret)) {
+		kfree(aos);
+		return ret;
+	}
+
+	ios->pages = pages;
+	ios->pgbase = pgbase;
+	ios->private = aos;
+	BUG_ON(ios->nr_pages > (pgbase + count + PAGE_SIZE - 1) >> PAGE_SHIFT);
+
+	aos->objios.sync = 0;
+	aos->objios.ios = ios;
+	*outp = &aos->objios;
 	return 0;
 }
 
-void objio_free_io_state(struct objlayout_io_state *ol_state)
+void objio_free_result(struct objlayout_io_res *oir)
 {
-	struct objio_state *ios = container_of(ol_state, struct objio_state,
-					       ol_state);
+	struct objio_state *objios = container_of(oir, struct objio_state, oir);
 
-	kfree(ios);
+	ore_put_io_state(objios->ios);
+	kfree(objios);
 }
 
 enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep)
@@ -455,539 +378,152 @@
 	}
 }
 
-static void _clear_bio(struct bio *bio)
+static void __on_dev_error(struct ore_io_state *ios,
+	struct ore_dev *od, unsigned dev_index, enum osd_err_priority oep,
+	u64 dev_offset, u64  dev_len)
 {
-	struct bio_vec *bv;
-	unsigned i;
+	struct objio_state *objios = ios->private;
+	struct pnfs_osd_objid pooid;
+	struct objio_dev_ent *ode = container_of(od, typeof(*ode), od);
+	/* FIXME: what to do with more-then-one-group layouts. We need to
+	 * translate from ore_io_state index to oc->comps index
+	 */
+	unsigned comp = dev_index;
 
-	__bio_for_each_segment(bv, bio, i, 0) {
-		unsigned this_count = bv->bv_len;
+	pooid.oid_device_id = ode->id_node.deviceid;
+	pooid.oid_partition_id = ios->oc->comps[comp].obj.partition;
+	pooid.oid_object_id = ios->oc->comps[comp].obj.id;
 
-		if (likely(PAGE_SIZE == this_count))
-			clear_highpage(bv->bv_page);
-		else
-			zero_user(bv->bv_page, bv->bv_offset, this_count);
-	}
-}
-
-static int _io_check(struct objio_state *ios, bool is_write)
-{
-	enum osd_err_priority oep = OSD_ERR_PRI_NO_ERROR;
-	int lin_ret = 0;
-	int i;
-
-	for (i = 0; i <  ios->numdevs; i++) {
-		struct osd_sense_info osi;
-		struct osd_request *or = ios->per_dev[i].or;
-		int ret;
-
-		if (!or)
-			continue;
-
-		ret = osd_req_decode_sense(or, &osi);
-		if (likely(!ret))
-			continue;
-
-		if (OSD_ERR_PRI_CLEAR_PAGES == osi.osd_err_pri) {
-			/* start read offset passed endof file */
-			BUG_ON(is_write);
-			_clear_bio(ios->per_dev[i].bio);
-			dprintk("%s: start read offset passed end of file "
-				"offset=0x%llx, length=0x%lx\n", __func__,
-				_LLU(ios->per_dev[i].offset),
-				ios->per_dev[i].length);
-
-			continue; /* we recovered */
-		}
-		objlayout_io_set_result(&ios->ol_state, i,
-					&ios->layout->comps[i].oc_object_id,
-					osd_pri_2_pnfs_err(osi.osd_err_pri),
-					ios->per_dev[i].offset,
-					ios->per_dev[i].length,
-					is_write);
-
-		if (osi.osd_err_pri >= oep) {
-			oep = osi.osd_err_pri;
-			lin_ret = ret;
-		}
-	}
-
-	return lin_ret;
-}
-
-/*
- * Common IO state helpers.
- */
-static void _io_free(struct objio_state *ios)
-{
-	unsigned i;
-
-	for (i = 0; i < ios->numdevs; i++) {
-		struct _objio_per_comp *per_dev = &ios->per_dev[i];
-
-		if (per_dev->or) {
-			osd_end_request(per_dev->or);
-			per_dev->or = NULL;
-		}
-
-		if (per_dev->bio) {
-			bio_put(per_dev->bio);
-			per_dev->bio = NULL;
-		}
-	}
-}
-
-struct osd_dev *_io_od(struct objio_state *ios, unsigned dev)
-{
-	unsigned min_dev = ios->layout->comps_index;
-	unsigned max_dev = min_dev + ios->layout->num_comps;
-
-	BUG_ON(dev < min_dev || max_dev <= dev);
-	return ios->layout->ods[dev - min_dev]->od;
-}
-
-struct _striping_info {
-	u64 obj_offset;
-	u64 group_length;
-	unsigned dev;
-	unsigned unit_off;
-};
-
-static void _calc_stripe_info(struct objio_state *ios, u64 file_offset,
-			      struct _striping_info *si)
-{
-	u32	stripe_unit = ios->layout->stripe_unit;
-	u32	group_width = ios->layout->group_width;
-	u64	group_depth = ios->layout->group_depth;
-	u32	U = stripe_unit * group_width;
-
-	u64	T = U * group_depth;
-	u64	S = T * ios->layout->group_count;
-	u64	M = div64_u64(file_offset, S);
-
-	/*
-	G = (L - (M * S)) / T
-	H = (L - (M * S)) % T
-	*/
-	u64	LmodU = file_offset - M * S;
-	u32	G = div64_u64(LmodU, T);
-	u64	H = LmodU - G * T;
-
-	u32	N = div_u64(H, U);
-
-	div_u64_rem(file_offset, stripe_unit, &si->unit_off);
-	si->obj_offset = si->unit_off + (N * stripe_unit) +
-				  (M * group_depth * stripe_unit);
-
-	/* "H - (N * U)" is just "H % U" so it's bound to u32 */
-	si->dev = (u32)(H - (N * U)) / stripe_unit + G * group_width;
-	si->dev *= ios->layout->mirrors_p1;
-
-	si->group_length = T - H;
-}
-
-static int _add_stripe_unit(struct objio_state *ios,  unsigned *cur_pg,
-		unsigned pgbase, struct _objio_per_comp *per_dev, int len,
-		gfp_t gfp_flags)
-{
-	unsigned pg = *cur_pg;
-	int cur_len = len;
-	struct request_queue *q =
-			osd_request_queue(_io_od(ios, per_dev->dev));
-
-	if (per_dev->bio == NULL) {
-		unsigned pages_in_stripe = ios->layout->group_width *
-				      (ios->layout->stripe_unit / PAGE_SIZE);
-		unsigned bio_size = (ios->ol_state.nr_pages + pages_in_stripe) /
-				    ios->layout->group_width;
-
-		if (BIO_MAX_PAGES_KMALLOC < bio_size)
-			bio_size = BIO_MAX_PAGES_KMALLOC;
-
-		per_dev->bio = bio_kmalloc(gfp_flags, bio_size);
-		if (unlikely(!per_dev->bio)) {
-			dprintk("Faild to allocate BIO size=%u\n", bio_size);
-			return -ENOMEM;
-		}
-	}
-
-	while (cur_len > 0) {
-		unsigned pglen = min_t(unsigned, PAGE_SIZE - pgbase, cur_len);
-		unsigned added_len;
-
-		BUG_ON(ios->ol_state.nr_pages <= pg);
-		cur_len -= pglen;
-
-		added_len = bio_add_pc_page(q, per_dev->bio,
-					ios->ol_state.pages[pg], pglen, pgbase);
-		if (unlikely(pglen != added_len))
-			return -ENOMEM;
-		pgbase = 0;
-		++pg;
-	}
-	BUG_ON(cur_len);
-
-	per_dev->length += len;
-	*cur_pg = pg;
-	return 0;
-}
-
-static int _prepare_one_group(struct objio_state *ios, u64 length,
-			      struct _striping_info *si, unsigned *last_pg,
-			      gfp_t gfp_flags)
-{
-	unsigned stripe_unit = ios->layout->stripe_unit;
-	unsigned mirrors_p1 = ios->layout->mirrors_p1;
-	unsigned devs_in_group = ios->layout->group_width * mirrors_p1;
-	unsigned dev = si->dev;
-	unsigned first_dev = dev - (dev % devs_in_group);
-	unsigned max_comp = ios->numdevs ? ios->numdevs - mirrors_p1 : 0;
-	unsigned cur_pg = *last_pg;
-	int ret = 0;
-
-	while (length) {
-		struct _objio_per_comp *per_dev = &ios->per_dev[dev - first_dev];
-		unsigned cur_len, page_off = 0;
-
-		if (!per_dev->length) {
-			per_dev->dev = dev;
-			if (dev < si->dev) {
-				per_dev->offset = si->obj_offset + stripe_unit -
-								   si->unit_off;
-				cur_len = stripe_unit;
-			} else if (dev == si->dev) {
-				per_dev->offset = si->obj_offset;
-				cur_len = stripe_unit - si->unit_off;
-				page_off = si->unit_off & ~PAGE_MASK;
-				BUG_ON(page_off &&
-				      (page_off != ios->ol_state.pgbase));
-			} else { /* dev > si->dev */
-				per_dev->offset = si->obj_offset - si->unit_off;
-				cur_len = stripe_unit;
-			}
-
-			if (max_comp < dev - first_dev)
-				max_comp = dev - first_dev;
-		} else {
-			cur_len = stripe_unit;
-		}
-		if (cur_len >= length)
-			cur_len = length;
-
-		ret = _add_stripe_unit(ios, &cur_pg, page_off , per_dev,
-				       cur_len, gfp_flags);
-		if (unlikely(ret))
-			goto out;
-
-		dev += mirrors_p1;
-		dev = (dev % devs_in_group) + first_dev;
-
-		length -= cur_len;
-		ios->length += cur_len;
-	}
-out:
-	ios->numdevs = max_comp + mirrors_p1;
-	*last_pg = cur_pg;
-	return ret;
-}
-
-static int _io_rw_pagelist(struct objio_state *ios, gfp_t gfp_flags)
-{
-	u64 length = ios->ol_state.count;
-	u64 offset = ios->ol_state.offset;
-	struct _striping_info si;
-	unsigned last_pg = 0;
-	int ret = 0;
-
-	while (length) {
-		_calc_stripe_info(ios, offset, &si);
-
-		if (length < si.group_length)
-			si.group_length = length;
-
-		ret = _prepare_one_group(ios, si.group_length, &si, &last_pg, gfp_flags);
-		if (unlikely(ret))
-			goto out;
-
-		offset += si.group_length;
-		length -= si.group_length;
-	}
-
-out:
-	if (!ios->length)
-		return ret;
-
-	return 0;
-}
-
-static ssize_t _sync_done(struct objio_state *ios)
-{
-	struct completion *waiting = ios->private;
-
-	complete(waiting);
-	return 0;
-}
-
-static void _last_io(struct kref *kref)
-{
-	struct objio_state *ios = container_of(kref, struct objio_state, kref);
-
-	ios->done(ios);
-}
-
-static void _done_io(struct osd_request *or, void *p)
-{
-	struct objio_state *ios = p;
-
-	kref_put(&ios->kref, _last_io);
-}
-
-static ssize_t _io_exec(struct objio_state *ios)
-{
-	DECLARE_COMPLETION_ONSTACK(wait);
-	ssize_t status = 0; /* sync status */
-	unsigned i;
-	objio_done_fn saved_done_fn = ios->done;
-	bool sync = ios->ol_state.sync;
-
-	if (sync) {
-		ios->done = _sync_done;
-		ios->private = &wait;
-	}
-
-	kref_init(&ios->kref);
-
-	for (i = 0; i < ios->numdevs; i++) {
-		struct osd_request *or = ios->per_dev[i].or;
-
-		if (!or)
-			continue;
-
-		kref_get(&ios->kref);
-		osd_execute_request_async(or, _done_io, ios);
-	}
-
-	kref_put(&ios->kref, _last_io);
-
-	if (sync) {
-		wait_for_completion(&wait);
-		status = saved_done_fn(ios);
-	}
-
-	return status;
+	objlayout_io_set_result(&objios->oir, comp,
+				&pooid, osd_pri_2_pnfs_err(oep),
+				dev_offset, dev_len, !ios->reading);
 }
 
 /*
  * read
  */
-static ssize_t _read_done(struct objio_state *ios)
+static void _read_done(struct ore_io_state *ios, void *private)
 {
+	struct objio_state *objios = private;
 	ssize_t status;
-	int ret = _io_check(ios, false);
+	int ret = ore_check_io(ios, &__on_dev_error);
 
-	_io_free(ios);
+	/* FIXME: _io_free(ios) can we dealocate the libosd resources; */
 
 	if (likely(!ret))
 		status = ios->length;
 	else
 		status = ret;
 
-	objlayout_read_done(&ios->ol_state, status, ios->ol_state.sync);
-	return status;
+	objlayout_read_done(&objios->oir, status, objios->sync);
 }
 
-static int _read_mirrors(struct objio_state *ios, unsigned cur_comp)
+int objio_read_pagelist(struct nfs_read_data *rdata)
 {
-	struct osd_request *or = NULL;
-	struct _objio_per_comp *per_dev = &ios->per_dev[cur_comp];
-	unsigned dev = per_dev->dev;
-	struct pnfs_osd_object_cred *cred =
-			&ios->layout->comps[cur_comp];
-	struct osd_obj_id obj = {
-		.partition = cred->oc_object_id.oid_partition_id,
-		.id = cred->oc_object_id.oid_object_id,
-	};
+	struct objio_state *objios;
 	int ret;
 
-	or = osd_start_request(_io_od(ios, dev), GFP_KERNEL);
-	if (unlikely(!or)) {
-		ret = -ENOMEM;
-		goto err;
-	}
-	per_dev->or = or;
-
-	osd_req_read(or, &obj, per_dev->offset, per_dev->bio, per_dev->length);
-
-	ret = osd_finalize_request(or, 0, cred->oc_cap.cred, NULL);
-	if (ret) {
-		dprintk("%s: Faild to osd_finalize_request() => %d\n",
-			__func__, ret);
-		goto err;
-	}
-
-	dprintk("%s:[%d] dev=%d obj=0x%llx start=0x%llx length=0x%lx\n",
-		__func__, cur_comp, dev, obj.id, _LLU(per_dev->offset),
-		per_dev->length);
-
-err:
-	return ret;
-}
-
-static ssize_t _read_exec(struct objio_state *ios)
-{
-	unsigned i;
-	int ret;
-
-	for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) {
-		if (!ios->per_dev[i].length)
-			continue;
-		ret = _read_mirrors(ios, i);
-		if (unlikely(ret))
-			goto err;
-	}
-
-	ios->done = _read_done;
-	return _io_exec(ios); /* In sync mode exec returns the io status */
-
-err:
-	_io_free(ios);
-	return ret;
-}
-
-ssize_t objio_read_pagelist(struct objlayout_io_state *ol_state)
-{
-	struct objio_state *ios = container_of(ol_state, struct objio_state,
-					       ol_state);
-	int ret;
-
-	ret = _io_rw_pagelist(ios, GFP_KERNEL);
+	ret = objio_alloc_io_state(NFS_I(rdata->inode)->layout, true,
+			rdata->lseg, rdata->args.pages, rdata->args.pgbase,
+			rdata->args.offset, rdata->args.count, rdata,
+			GFP_KERNEL, &objios);
 	if (unlikely(ret))
 		return ret;
 
-	return _read_exec(ios);
+	objios->ios->done = _read_done;
+	dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
+		rdata->args.offset, rdata->args.count);
+	return ore_read(objios->ios);
 }
 
 /*
  * write
  */
-static ssize_t _write_done(struct objio_state *ios)
+static void _write_done(struct ore_io_state *ios, void *private)
 {
+	struct objio_state *objios = private;
 	ssize_t status;
-	int ret = _io_check(ios, true);
+	int ret = ore_check_io(ios, &__on_dev_error);
 
-	_io_free(ios);
+	/* FIXME: _io_free(ios) can we dealocate the libosd resources; */
 
 	if (likely(!ret)) {
 		/* FIXME: should be based on the OSD's persistence model
 		 * See OSD2r05 Section 4.13 Data persistence model */
-		ios->ol_state.committed = NFS_FILE_SYNC;
+		objios->oir.committed = NFS_FILE_SYNC;
 		status = ios->length;
 	} else {
 		status = ret;
 	}
 
-	objlayout_write_done(&ios->ol_state, status, ios->ol_state.sync);
-	return status;
+	objlayout_write_done(&objios->oir, status, objios->sync);
 }
 
-static int _write_mirrors(struct objio_state *ios, unsigned cur_comp)
+static struct page *__r4w_get_page(void *priv, u64 offset, bool *uptodate)
 {
-	struct _objio_per_comp *master_dev = &ios->per_dev[cur_comp];
-	unsigned dev = ios->per_dev[cur_comp].dev;
-	unsigned last_comp = cur_comp + ios->layout->mirrors_p1;
-	int ret;
+	struct objio_state *objios = priv;
+	struct nfs_write_data *wdata = objios->oir.rpcdata;
+	pgoff_t index = offset / PAGE_SIZE;
+	struct page *page = find_get_page(wdata->inode->i_mapping, index);
 
-	for (; cur_comp < last_comp; ++cur_comp, ++dev) {
-		struct osd_request *or = NULL;
-		struct pnfs_osd_object_cred *cred =
-					&ios->layout->comps[cur_comp];
-		struct osd_obj_id obj = {
-			.partition = cred->oc_object_id.oid_partition_id,
-			.id = cred->oc_object_id.oid_object_id,
-		};
-		struct _objio_per_comp *per_dev = &ios->per_dev[cur_comp];
-		struct bio *bio;
-
-		or = osd_start_request(_io_od(ios, dev), GFP_NOFS);
-		if (unlikely(!or)) {
-			ret = -ENOMEM;
-			goto err;
+	if (!page) {
+		page = find_or_create_page(wdata->inode->i_mapping,
+						index, GFP_NOFS);
+		if (unlikely(!page)) {
+			dprintk("%s: grab_cache_page Failed index=0x%lx\n",
+				__func__, index);
+			return NULL;
 		}
-		per_dev->or = or;
-
-		if (per_dev != master_dev) {
-			bio = bio_kmalloc(GFP_NOFS,
-					  master_dev->bio->bi_max_vecs);
-			if (unlikely(!bio)) {
-				dprintk("Faild to allocate BIO size=%u\n",
-					master_dev->bio->bi_max_vecs);
-				ret = -ENOMEM;
-				goto err;
-			}
-
-			__bio_clone(bio, master_dev->bio);
-			bio->bi_bdev = NULL;
-			bio->bi_next = NULL;
-			per_dev->bio = bio;
-			per_dev->dev = dev;
-			per_dev->length = master_dev->length;
-			per_dev->offset =  master_dev->offset;
-		} else {
-			bio = master_dev->bio;
-			bio->bi_rw |= REQ_WRITE;
-		}
-
-		osd_req_write(or, &obj, per_dev->offset, bio, per_dev->length);
-
-		ret = osd_finalize_request(or, 0, cred->oc_cap.cred, NULL);
-		if (ret) {
-			dprintk("%s: Faild to osd_finalize_request() => %d\n",
-				__func__, ret);
-			goto err;
-		}
-
-		dprintk("%s:[%d] dev=%d obj=0x%llx start=0x%llx length=0x%lx\n",
-			__func__, cur_comp, dev, obj.id, _LLU(per_dev->offset),
-			per_dev->length);
+		unlock_page(page);
 	}
-
-err:
-	return ret;
+	if (PageDirty(page) || PageWriteback(page))
+		*uptodate = true;
+	else
+		*uptodate = PageUptodate(page);
+	dprintk("%s: index=0x%lx uptodate=%d\n", __func__, index, *uptodate);
+	return page;
 }
 
-static ssize_t _write_exec(struct objio_state *ios)
+static void __r4w_put_page(void *priv, struct page *page)
 {
-	unsigned i;
-	int ret;
-
-	for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) {
-		if (!ios->per_dev[i].length)
-			continue;
-		ret = _write_mirrors(ios, i);
-		if (unlikely(ret))
-			goto err;
-	}
-
-	ios->done = _write_done;
-	return _io_exec(ios); /* In sync mode exec returns the io->status */
-
-err:
-	_io_free(ios);
-	return ret;
+	dprintk("%s: index=0x%lx\n", __func__, page->index);
+	page_cache_release(page);
+	return;
 }
 
-ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, bool stable)
+static const struct _ore_r4w_op _r4w_op = {
+	.get_page = &__r4w_get_page,
+	.put_page = &__r4w_put_page,
+};
+
+int objio_write_pagelist(struct nfs_write_data *wdata, int how)
 {
-	struct objio_state *ios = container_of(ol_state, struct objio_state,
-					       ol_state);
+	struct objio_state *objios;
 	int ret;
 
-	/* TODO: ios->stable = stable; */
-	ret = _io_rw_pagelist(ios, GFP_NOFS);
+	ret = objio_alloc_io_state(NFS_I(wdata->inode)->layout, false,
+			wdata->lseg, wdata->args.pages, wdata->args.pgbase,
+			wdata->args.offset, wdata->args.count, wdata, GFP_NOFS,
+			&objios);
 	if (unlikely(ret))
 		return ret;
 
-	return _write_exec(ios);
+	objios->sync = 0 != (how & FLUSH_SYNC);
+	objios->ios->r4w = &_r4w_op;
+
+	if (!objios->sync)
+		objios->ios->done = _write_done;
+
+	dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
+		wdata->args.offset, wdata->args.count);
+	ret = ore_write(objios->ios);
+	if (unlikely(ret))
+		return ret;
+
+	if (objios->sync)
+		_write_done(objios->ios, objios);
+
+	return 0;
 }
 
 static bool objio_pg_test(struct nfs_pageio_descriptor *pgio,
@@ -997,7 +533,7 @@
 		return false;
 
 	return pgio->pg_count + req->wb_bytes <=
-			OBJIO_LSEG(pgio->pg_lseg)->max_io_size;
+			OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length;
 }
 
 static const struct nfs_pageio_ops objio_pg_read_ops = {
diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c
index 1d06f8e..72074e3 100644
--- a/fs/nfs/objlayout/objlayout.c
+++ b/fs/nfs/objlayout/objlayout.c
@@ -156,77 +156,39 @@
 	return end > start ? end - 1 : NFS4_MAX_UINT64;
 }
 
-static struct objlayout_io_state *
-objlayout_alloc_io_state(struct pnfs_layout_hdr *pnfs_layout_type,
-			struct page **pages,
-			unsigned pgbase,
-			loff_t offset,
-			size_t count,
-			struct pnfs_layout_segment *lseg,
-			void *rpcdata,
-			gfp_t gfp_flags)
+void _fix_verify_io_params(struct pnfs_layout_segment *lseg,
+			   struct page ***p_pages, unsigned *p_pgbase,
+			   u64 offset, unsigned long count)
 {
-	struct objlayout_io_state *state;
 	u64 lseg_end_offset;
 
-	dprintk("%s: allocating io_state\n", __func__);
-	if (objio_alloc_io_state(lseg, &state, gfp_flags))
-		return NULL;
-
 	BUG_ON(offset < lseg->pls_range.offset);
 	lseg_end_offset = end_offset(lseg->pls_range.offset,
 				     lseg->pls_range.length);
 	BUG_ON(offset >= lseg_end_offset);
-	if (offset + count > lseg_end_offset) {
-		count = lseg->pls_range.length -
-				(offset - lseg->pls_range.offset);
-		dprintk("%s: truncated count %Zd\n", __func__, count);
+	WARN_ON(offset + count > lseg_end_offset);
+
+	if (*p_pgbase > PAGE_SIZE) {
+		dprintk("%s: pgbase(0x%x) > PAGE_SIZE\n", __func__, *p_pgbase);
+		*p_pages += *p_pgbase >> PAGE_SHIFT;
+		*p_pgbase &= ~PAGE_MASK;
 	}
-
-	if (pgbase > PAGE_SIZE) {
-		pages += pgbase >> PAGE_SHIFT;
-		pgbase &= ~PAGE_MASK;
-	}
-
-	INIT_LIST_HEAD(&state->err_list);
-	state->lseg = lseg;
-	state->rpcdata = rpcdata;
-	state->pages = pages;
-	state->pgbase = pgbase;
-	state->nr_pages = (pgbase + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	state->offset = offset;
-	state->count = count;
-	state->sync = 0;
-
-	return state;
-}
-
-static void
-objlayout_free_io_state(struct objlayout_io_state *state)
-{
-	dprintk("%s: freeing io_state\n", __func__);
-	if (unlikely(!state))
-		return;
-
-	objio_free_io_state(state);
 }
 
 /*
  * I/O done common code
  */
 static void
-objlayout_iodone(struct objlayout_io_state *state)
+objlayout_iodone(struct objlayout_io_res *oir)
 {
-	dprintk("%s: state %p status\n", __func__, state);
-
-	if (likely(state->status >= 0)) {
-		objlayout_free_io_state(state);
+	if (likely(oir->status >= 0)) {
+		objio_free_result(oir);
 	} else {
-		struct objlayout *objlay = OBJLAYOUT(state->lseg->pls_layout);
+		struct objlayout *objlay = oir->objlay;
 
 		spin_lock(&objlay->lock);
 		objlay->delta_space_valid = OBJ_DSU_INVALID;
-		list_add(&objlay->err_list, &state->err_list);
+		list_add(&objlay->err_list, &oir->err_list);
 		spin_unlock(&objlay->lock);
 	}
 }
@@ -238,13 +200,13 @@
  * the error for later reporting at layout-return.
  */
 void
-objlayout_io_set_result(struct objlayout_io_state *state, unsigned index,
+objlayout_io_set_result(struct objlayout_io_res *oir, unsigned index,
 			struct pnfs_osd_objid *pooid, int osd_error,
 			u64 offset, u64 length, bool is_write)
 {
-	struct pnfs_osd_ioerr *ioerr = &state->ioerrs[index];
+	struct pnfs_osd_ioerr *ioerr = &oir->ioerrs[index];
 
-	BUG_ON(index >= state->num_comps);
+	BUG_ON(index >= oir->num_comps);
 	if (osd_error) {
 		ioerr->oer_component = *pooid;
 		ioerr->oer_comp_offset = offset;
@@ -285,21 +247,18 @@
 }
 
 void
-objlayout_read_done(struct objlayout_io_state *state, ssize_t status, bool sync)
+objlayout_read_done(struct objlayout_io_res *oir, ssize_t status, bool sync)
 {
-	int eof = state->eof;
-	struct nfs_read_data *rdata;
+	struct nfs_read_data *rdata = oir->rpcdata;
 
-	state->status = status;
-	dprintk("%s: Begin status=%zd eof=%d\n", __func__, status, eof);
-	rdata = state->rpcdata;
-	rdata->task.tk_status = status;
-	if (status >= 0) {
+	oir->status = rdata->task.tk_status = status;
+	if (status >= 0)
 		rdata->res.count = status;
-		rdata->res.eof = eof;
-	}
-	objlayout_iodone(state);
-	/* must not use state after this point */
+	objlayout_iodone(oir);
+	/* must not use oir after this point */
+
+	dprintk("%s: Return status=%zd eof=%d sync=%d\n", __func__,
+		status, rdata->res.eof, sync);
 
 	if (sync)
 		pnfs_ld_read_done(rdata);
@@ -317,40 +276,36 @@
 {
 	loff_t offset = rdata->args.offset;
 	size_t count = rdata->args.count;
-	struct objlayout_io_state *state;
-	ssize_t status = 0;
+	int err;
 	loff_t eof;
 
-	dprintk("%s: Begin inode %p offset %llu count %d\n",
-		__func__, rdata->inode, offset, (int)count);
-
 	eof = i_size_read(rdata->inode);
 	if (unlikely(offset + count > eof)) {
 		if (offset >= eof) {
-			status = 0;
+			err = 0;
 			rdata->res.count = 0;
 			rdata->res.eof = 1;
+			/*FIXME: do we need to call pnfs_ld_read_done() */
 			goto out;
 		}
 		count = eof - offset;
 	}
 
-	state = objlayout_alloc_io_state(NFS_I(rdata->inode)->layout,
-					 rdata->args.pages, rdata->args.pgbase,
-					 offset, count,
-					 rdata->lseg, rdata,
-					 GFP_KERNEL);
-	if (unlikely(!state)) {
-		status = -ENOMEM;
-		goto out;
-	}
+	rdata->res.eof = (offset + count) >= eof;
+	_fix_verify_io_params(rdata->lseg, &rdata->args.pages,
+			      &rdata->args.pgbase,
+			      rdata->args.offset, rdata->args.count);
 
-	state->eof = state->offset + state->count >= eof;
+	dprintk("%s: inode(%lx) offset 0x%llx count 0x%Zx eof=%d\n",
+		__func__, rdata->inode->i_ino, offset, count, rdata->res.eof);
 
-	status = objio_read_pagelist(state);
+	err = objio_read_pagelist(rdata);
  out:
-	dprintk("%s: Return status %Zd\n", __func__, status);
-	rdata->pnfs_error = status;
+	if (unlikely(err)) {
+		rdata->pnfs_error = err;
+		dprintk("%s: Returned Error %d\n", __func__, err);
+		return PNFS_NOT_ATTEMPTED;
+	}
 	return PNFS_ATTEMPTED;
 }
 
@@ -371,26 +326,20 @@
 }
 
 void
-objlayout_write_done(struct objlayout_io_state *state, ssize_t status,
-		     bool sync)
+objlayout_write_done(struct objlayout_io_res *oir, ssize_t status, bool sync)
 {
-	struct nfs_write_data *wdata;
+	struct nfs_write_data *wdata = oir->rpcdata;
 
-	dprintk("%s: Begin\n", __func__);
-	wdata = state->rpcdata;
-	state->status = status;
-	wdata->task.tk_status = status;
+	oir->status = wdata->task.tk_status = status;
 	if (status >= 0) {
 		wdata->res.count = status;
-		wdata->verf.committed = state->committed;
-		dprintk("%s: Return status %d committed %d\n",
-			__func__, wdata->task.tk_status,
-			wdata->verf.committed);
-	} else
-		dprintk("%s: Return status %d\n",
-			__func__, wdata->task.tk_status);
-	objlayout_iodone(state);
-	/* must not use state after this point */
+		wdata->verf.committed = oir->committed;
+	}
+	objlayout_iodone(oir);
+	/* must not use oir after this point */
+
+	dprintk("%s: Return status %zd committed %d sync=%d\n", __func__,
+		status, wdata->verf.committed, sync);
 
 	if (sync)
 		pnfs_ld_write_done(wdata);
@@ -407,30 +356,18 @@
 objlayout_write_pagelist(struct nfs_write_data *wdata,
 			 int how)
 {
-	struct objlayout_io_state *state;
-	ssize_t status;
+	int err;
 
-	dprintk("%s: Begin inode %p offset %llu count %u\n",
-		__func__, wdata->inode, wdata->args.offset, wdata->args.count);
+	_fix_verify_io_params(wdata->lseg, &wdata->args.pages,
+			      &wdata->args.pgbase,
+			      wdata->args.offset, wdata->args.count);
 
-	state = objlayout_alloc_io_state(NFS_I(wdata->inode)->layout,
-					 wdata->args.pages,
-					 wdata->args.pgbase,
-					 wdata->args.offset,
-					 wdata->args.count,
-					 wdata->lseg, wdata,
-					 GFP_NOFS);
-	if (unlikely(!state)) {
-		status = -ENOMEM;
-		goto out;
+	err = objio_write_pagelist(wdata, how);
+	if (unlikely(err)) {
+		wdata->pnfs_error = err;
+		dprintk("%s: Returned Error %d\n", __func__, err);
+		return PNFS_NOT_ATTEMPTED;
 	}
-
-	state->sync = how & FLUSH_SYNC;
-
-	status = objio_write_pagelist(state, how & FLUSH_STABLE);
- out:
-	dprintk("%s: Return status %Zd\n", __func__, status);
-	wdata->pnfs_error = status;
 	return PNFS_ATTEMPTED;
 }
 
@@ -537,14 +474,14 @@
 static void
 encode_accumulated_error(struct objlayout *objlay, __be32 *p)
 {
-	struct objlayout_io_state *state, *tmp;
+	struct objlayout_io_res *oir, *tmp;
 	struct pnfs_osd_ioerr accumulated_err = {.oer_errno = 0};
 
-	list_for_each_entry_safe(state, tmp, &objlay->err_list, err_list) {
+	list_for_each_entry_safe(oir, tmp, &objlay->err_list, err_list) {
 		unsigned i;
 
-		for (i = 0; i < state->num_comps; i++) {
-			struct pnfs_osd_ioerr *ioerr = &state->ioerrs[i];
+		for (i = 0; i < oir->num_comps; i++) {
+			struct pnfs_osd_ioerr *ioerr = &oir->ioerrs[i];
 
 			if (!ioerr->oer_errno)
 				continue;
@@ -563,8 +500,8 @@
 
 			merge_ioerr(&accumulated_err, ioerr);
 		}
-		list_del(&state->err_list);
-		objlayout_free_io_state(state);
+		list_del(&oir->err_list);
+		objio_free_result(oir);
 	}
 
 	pnfs_osd_xdr_encode_ioerr(p, &accumulated_err);
@@ -576,7 +513,7 @@
 			      const struct nfs4_layoutreturn_args *args)
 {
 	struct objlayout *objlay = OBJLAYOUT(pnfslay);
-	struct objlayout_io_state *state, *tmp;
+	struct objlayout_io_res *oir, *tmp;
 	__be32 *start;
 
 	dprintk("%s: Begin\n", __func__);
@@ -585,13 +522,13 @@
 
 	spin_lock(&objlay->lock);
 
-	list_for_each_entry_safe(state, tmp, &objlay->err_list, err_list) {
+	list_for_each_entry_safe(oir, tmp, &objlay->err_list, err_list) {
 		__be32 *last_xdr = NULL, *p;
 		unsigned i;
 		int res = 0;
 
-		for (i = 0; i < state->num_comps; i++) {
-			struct pnfs_osd_ioerr *ioerr = &state->ioerrs[i];
+		for (i = 0; i < oir->num_comps; i++) {
+			struct pnfs_osd_ioerr *ioerr = &oir->ioerrs[i];
 
 			if (!ioerr->oer_errno)
 				continue;
@@ -615,7 +552,7 @@
 			}
 
 			last_xdr = p;
-			pnfs_osd_xdr_encode_ioerr(p, &state->ioerrs[i]);
+			pnfs_osd_xdr_encode_ioerr(p, &oir->ioerrs[i]);
 		}
 
 		/* TODO: use xdr_write_pages */
@@ -631,8 +568,8 @@
 			encode_accumulated_error(objlay, last_xdr);
 			goto loop_done;
 		}
-		list_del(&state->err_list);
-		objlayout_free_io_state(state);
+		list_del(&oir->err_list);
+		objio_free_result(oir);
 	}
 loop_done:
 	spin_unlock(&objlay->lock);
diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h
index a8244c8..8ec3472 100644
--- a/fs/nfs/objlayout/objlayout.h
+++ b/fs/nfs/objlayout/objlayout.h
@@ -74,19 +74,11 @@
  * per-I/O operation state
  * embedded in objects provider io_state data structure
  */
-struct objlayout_io_state {
-	struct pnfs_layout_segment *lseg;
-
-	struct page **pages;
-	unsigned pgbase;
-	unsigned nr_pages;
-	unsigned long count;
-	loff_t offset;
-	bool sync;
+struct objlayout_io_res {
+	struct objlayout *objlay;
 
 	void *rpcdata;
 	int status;             /* res */
-	int eof;                /* res */
 	int committed;          /* res */
 
 	/* Error reporting (layout_return) */
@@ -100,6 +92,18 @@
 	struct pnfs_osd_ioerr *ioerrs;
 };
 
+static inline
+void objlayout_init_ioerrs(struct objlayout_io_res *oir, unsigned num_comps,
+			struct pnfs_osd_ioerr *ioerrs, void *rpcdata,
+			struct pnfs_layout_hdr *pnfs_layout_type)
+{
+	oir->objlay = OBJLAYOUT(pnfs_layout_type);
+	oir->rpcdata = rpcdata;
+	INIT_LIST_HEAD(&oir->err_list);
+	oir->num_comps = num_comps;
+	oir->ioerrs = ioerrs;
+}
+
 /*
  * Raid engine I/O API
  */
@@ -110,28 +114,24 @@
 	gfp_t gfp_flags);
 extern void objio_free_lseg(struct pnfs_layout_segment *lseg);
 
-extern int objio_alloc_io_state(
-	struct pnfs_layout_segment *lseg,
-	struct objlayout_io_state **outp,
-	gfp_t gfp_flags);
-extern void objio_free_io_state(struct objlayout_io_state *state);
+/* objio_free_result will free these @oir structs recieved from
+ * objlayout_{read,write}_done
+ */
+extern void objio_free_result(struct objlayout_io_res *oir);
 
-extern ssize_t objio_read_pagelist(struct objlayout_io_state *ol_state);
-extern ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state,
-				    bool stable);
+extern int objio_read_pagelist(struct nfs_read_data *rdata);
+extern int objio_write_pagelist(struct nfs_write_data *wdata, int how);
 
 /*
  * callback API
  */
-extern void objlayout_io_set_result(struct objlayout_io_state *state,
+extern void objlayout_io_set_result(struct objlayout_io_res *oir,
 			unsigned index, struct pnfs_osd_objid *pooid,
 			int osd_error, u64 offset, u64 length, bool is_write);
 
 static inline void
-objlayout_add_delta_space_used(struct objlayout_io_state *state, s64 space_used)
+objlayout_add_delta_space_used(struct objlayout *objlay, s64 space_used)
 {
-	struct objlayout *objlay = OBJLAYOUT(state->lseg->pls_layout);
-
 	/* If one of the I/Os errored out and the delta_space_used was
 	 * invalid we render the complete report as invalid. Protocol mandate
 	 * the DSU be accurate or not reported.
@@ -144,9 +144,9 @@
 	spin_unlock(&objlay->lock);
 }
 
-extern void objlayout_read_done(struct objlayout_io_state *state,
+extern void objlayout_read_done(struct objlayout_io_res *oir,
 				ssize_t status, bool sync);
-extern void objlayout_write_done(struct objlayout_io_state *state,
+extern void objlayout_write_done(struct objlayout_io_res *oir,
 				 ssize_t status, bool sync);
 
 extern int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay,
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index b60970c..5668f7c 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -18,6 +18,7 @@
 #include <linux/nfs_page.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_mount.h>
+#include <linux/export.h>
 
 #include "internal.h"
 #include "pnfs.h"
@@ -41,7 +42,7 @@
 
 /**
  * nfs_create_request - Create an NFS read/write request.
- * @file: file descriptor to use
+ * @ctx: open context to use
  * @inode: inode to which the request is attached
  * @page: page to write
  * @offset: starting offset within the page for the write
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index ee73d9a..8e672a2 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -29,6 +29,7 @@
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
+#include <linux/module.h>
 #include "internal.h"
 #include "pnfs.h"
 #include "iostat.h"
@@ -1259,6 +1260,25 @@
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_pg_writepages);
 
+static void pnfs_ld_handle_read_error(struct nfs_read_data *data)
+{
+	struct nfs_pageio_descriptor pgio;
+
+	put_lseg(data->lseg);
+	data->lseg = NULL;
+	dprintk("pnfs write error = %d\n", data->pnfs_error);
+
+	nfs_pageio_init_read_mds(&pgio, data->inode);
+
+	while (!list_empty(&data->pages)) {
+		struct nfs_page *req = nfs_list_entry(data->pages.next);
+
+		nfs_list_remove_request(req);
+		nfs_pageio_add_request(&pgio, req);
+	}
+	nfs_pageio_complete(&pgio);
+}
+
 /*
  * Called by non rpc-based layout drivers
  */
@@ -1267,11 +1287,8 @@
 	if (likely(!data->pnfs_error)) {
 		__nfs4_read_done_cb(data);
 		data->mds_ops->rpc_call_done(&data->task, data);
-	} else {
-		put_lseg(data->lseg);
-		data->lseg = NULL;
-		dprintk("pnfs write error = %d\n", data->pnfs_error);
-	}
+	} else
+		pnfs_ld_handle_read_error(data);
 	data->mds_ops->rpc_release(data);
 }
 EXPORT_SYMBOL_GPL(pnfs_ld_read_done);
@@ -1443,17 +1460,31 @@
 	/* Note kzalloc ensures data->res.seq_res.sr_slot == NULL */
 	data = kzalloc(sizeof(*data), GFP_NOFS);
 	if (!data) {
-		mark_inode_dirty_sync(inode);
 		status = -ENOMEM;
 		goto out;
 	}
 
+	if (!test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags))
+		goto out_free;
+
+	if (test_and_set_bit(NFS_INO_LAYOUTCOMMITTING, &nfsi->flags)) {
+		if (!sync) {
+			status = -EAGAIN;
+			goto out_free;
+		}
+		status = wait_on_bit_lock(&nfsi->flags, NFS_INO_LAYOUTCOMMITTING,
+					nfs_wait_bit_killable, TASK_KILLABLE);
+		if (status)
+			goto out_free;
+	}
+
 	INIT_LIST_HEAD(&data->lseg_list);
 	spin_lock(&inode->i_lock);
 	if (!test_and_clear_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) {
+		clear_bit(NFS_INO_LAYOUTCOMMITTING, &nfsi->flags);
 		spin_unlock(&inode->i_lock);
-		kfree(data);
-		goto out;
+		wake_up_bit(&nfsi->flags, NFS_INO_LAYOUTCOMMITTING);
+		goto out_free;
 	}
 
 	pnfs_list_write_lseg(inode, &data->lseg_list);
@@ -1475,6 +1506,11 @@
 
 	status = nfs4_proc_layoutcommit(data, sync);
 out:
+	if (status)
+		mark_inode_dirty_sync(inode);
 	dprintk("<-- %s status %d\n", __func__, status);
 	return status;
+out_free:
+	kfree(data);
+	goto out;
 }
diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c
index 6fda522..4f359d2 100644
--- a/fs/nfs/pnfs_dev.c
+++ b/fs/nfs/pnfs_dev.c
@@ -28,6 +28,7 @@
  *  such damages.
  */
 
+#include <linux/export.h>
 #include "pnfs.h"
 
 #define NFSDBG_FACILITY		NFSDBG_PNFS
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index ac40b85..f48125d 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -710,6 +710,7 @@
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs_dir_inode_operations,
 	.file_inode_ops	= &nfs_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs_proc_get_root,
 	.getattr	= nfs_proc_getattr,
 	.setattr	= nfs_proc_setattr,
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 8b48ec6..cfa175c 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -109,7 +109,7 @@
 	}
 }
 
-static void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
+void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
 		struct inode *inode)
 {
 	nfs_pageio_init(pgio, inode, &nfs_pageio_read_ops,
@@ -534,23 +534,13 @@
 static void nfs_readpage_release_full(void *calldata)
 {
 	struct nfs_read_data *data = calldata;
-	struct nfs_pageio_descriptor pgio;
 
-	if (data->pnfs_error) {
-		nfs_pageio_init_read_mds(&pgio, data->inode);
-		pgio.pg_recoalesce = 1;
-	}
 	while (!list_empty(&data->pages)) {
 		struct nfs_page *req = nfs_list_entry(data->pages.next);
 
 		nfs_list_remove_request(req);
-		if (!data->pnfs_error)
-			nfs_readpage_release(req);
-		else
-			nfs_pageio_add_request(&pgio, req);
+		nfs_readpage_release(req);
 	}
-	if (data->pnfs_error)
-		nfs_pageio_complete(&pgio);
 	nfs_readdata_release(calldata);
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 480b3b6..1347774 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2787,43 +2787,18 @@
 static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt,
 		const char *export_path)
 {
-	struct mnt_namespace *ns_private;
-	struct super_block *s;
 	struct dentry *dentry;
-	struct path path;
-	int ret;
+	int ret = nfs_referral_loop_protect();
 
-	ns_private = create_mnt_ns(root_mnt);
-	ret = PTR_ERR(ns_private);
-	if (IS_ERR(ns_private))
-		goto out_mntput;
+	if (ret) {
+		mntput(root_mnt);
+		return ERR_PTR(ret);
+	}
 
-	ret = nfs_referral_loop_protect();
-	if (ret != 0)
-		goto out_put_mnt_ns;
-
-	ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
-			export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
-
+	dentry = mount_subtree(root_mnt, export_path);
 	nfs_referral_loop_unprotect();
-	put_mnt_ns(ns_private);
 
-	if (ret != 0)
-		goto out_err;
-
-	s = path.mnt->mnt_sb;
-	atomic_inc(&s->s_active);
-	dentry = dget(path.dentry);
-
-	path_put(&path);
-	down_write(&s->s_umount);
 	return dentry;
-out_put_mnt_ns:
-	put_mnt_ns(ns_private);
-out_mntput:
-	mntput(root_mnt);
-out_err:
-	return ERR_PTR(ret);
 }
 
 static struct dentry *nfs4_try_mount(int flags, const char *dev_name,
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 2219c88..1dda78d 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -20,6 +20,7 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs_page.h>
 #include <linux/backing-dev.h>
+#include <linux/export.h>
 
 #include <asm/uaccess.h>
 
@@ -1243,7 +1244,6 @@
 {
 	struct nfs_writeargs	*argp = &data->args;
 	struct nfs_writeres	*resp = &data->res;
-	struct nfs_server	*server = NFS_SERVER(data->inode);
 	int status;
 
 	dprintk("NFS: %5u nfs_writeback_done (status %d)\n",
@@ -1277,7 +1277,7 @@
 		if (time_before(complain, jiffies)) {
 			dprintk("NFS:       faulty NFS server %s:"
 				" (committed = %d) != (stable = %d)\n",
-				server->nfs_client->cl_hostname,
+				NFS_SERVER(data->inode)->nfs_client->cl_hostname,
 				resp->verf->committed, argp->stable);
 			complain = jiffies + 300 * HZ;
 		}
diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index ad88f1c..9c51aff 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -36,6 +36,7 @@
 
 #include <linux/slab.h>
 #include <linux/nfs_fs.h>
+#include <linux/export.h>
 #include "acl.h"
 
 
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index db34a58..c45a2ea 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -13,6 +13,7 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/gss_api.h>
 #include <linux/sunrpc/gss_krb5_enctypes.h>
+#include <linux/module.h>
 
 #include "idmap.h"
 #include "nfsd.h"
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index dc5a1bf..eda7d7e 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -8,6 +8,7 @@
 
 #include <linux/sched.h>
 #include <linux/freezer.h>
+#include <linux/module.h>
 #include <linux/fs_struct.h>
 #include <linux/swap.h>
 
@@ -256,6 +257,8 @@
 	nfsd_serv = NULL;
 	nfsd_shutdown();
 
+	svc_rpcb_cleanup(serv);
+
 	printk(KERN_WARNING "nfsd: last server has exited, flushing export "
 			    "cache\n");
 	nfsd_export_flush();
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index ed553c6..3165aeb 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -5699,7 +5699,7 @@
 					   OCFS2_JOURNAL_ACCESS_WRITE);
 	if (ret) {
 		mlog_errno(ret);
-		goto out;
+		goto out_commit;
 	}
 
 	dquot_free_space_nodirty(inode,
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index c1efe93..78b68af 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -290,7 +290,15 @@
 	}
 
 	if (down_read_trylock(&oi->ip_alloc_sem) == 0) {
+		/*
+		 * Unlock the page and cycle ip_alloc_sem so that we don't
+		 * busyloop waiting for ip_alloc_sem to unlock
+		 */
 		ret = AOP_TRUNCATED_PAGE;
+		unlock_page(page);
+		unlock = 0;
+		down_read(&oi->ip_alloc_sem);
+		up_read(&oi->ip_alloc_sem);
 		goto out_inode_unlock;
 	}
 
@@ -563,6 +571,7 @@
 {
 	struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
 	int level;
+	wait_queue_head_t *wq = ocfs2_ioend_wq(inode);
 
 	/* this io's submitter should not have unlocked this before we could */
 	BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
@@ -570,6 +579,15 @@
 	if (ocfs2_iocb_is_sem_locked(iocb))
 		ocfs2_iocb_clear_sem_locked(iocb);
 
+	if (ocfs2_iocb_is_unaligned_aio(iocb)) {
+		ocfs2_iocb_clear_unaligned_aio(iocb);
+
+		if (atomic_dec_and_test(&OCFS2_I(inode)->ip_unaligned_aio) &&
+		    waitqueue_active(wq)) {
+			wake_up_all(wq);
+		}
+	}
+
 	ocfs2_iocb_clear_rw_locked(iocb);
 
 	level = ocfs2_iocb_rw_locked_level(iocb);
@@ -863,6 +881,12 @@
 	struct page			*w_target_page;
 
 	/*
+	 * w_target_locked is used for page_mkwrite path indicating no unlocking
+	 * against w_target_page in ocfs2_write_end_nolock.
+	 */
+	unsigned int			w_target_locked:1;
+
+	/*
 	 * ocfs2_write_end() uses this to know what the real range to
 	 * write in the target should be.
 	 */
@@ -895,6 +919,24 @@
 
 static void ocfs2_free_write_ctxt(struct ocfs2_write_ctxt *wc)
 {
+	int i;
+
+	/*
+	 * w_target_locked is only set to true in the page_mkwrite() case.
+	 * The intent is to allow us to lock the target page from write_begin()
+	 * to write_end(). The caller must hold a ref on w_target_page.
+	 */
+	if (wc->w_target_locked) {
+		BUG_ON(!wc->w_target_page);
+		for (i = 0; i < wc->w_num_pages; i++) {
+			if (wc->w_target_page == wc->w_pages[i]) {
+				wc->w_pages[i] = NULL;
+				break;
+			}
+		}
+		mark_page_accessed(wc->w_target_page);
+		page_cache_release(wc->w_target_page);
+	}
 	ocfs2_unlock_and_free_pages(wc->w_pages, wc->w_num_pages);
 
 	brelse(wc->w_di_bh);
@@ -1132,20 +1174,17 @@
 			 */
 			lock_page(mmap_page);
 
+			/* Exit and let the caller retry */
 			if (mmap_page->mapping != mapping) {
+				WARN_ON(mmap_page->mapping);
 				unlock_page(mmap_page);
-				/*
-				 * Sanity check - the locking in
-				 * ocfs2_pagemkwrite() should ensure
-				 * that this code doesn't trigger.
-				 */
-				ret = -EINVAL;
-				mlog_errno(ret);
+				ret = -EAGAIN;
 				goto out;
 			}
 
 			page_cache_get(mmap_page);
 			wc->w_pages[i] = mmap_page;
+			wc->w_target_locked = true;
 		} else {
 			wc->w_pages[i] = find_or_create_page(mapping, index,
 							     GFP_NOFS);
@@ -1160,6 +1199,8 @@
 			wc->w_target_page = wc->w_pages[i];
 	}
 out:
+	if (ret)
+		wc->w_target_locked = false;
 	return ret;
 }
 
@@ -1817,11 +1858,23 @@
 	 */
 	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
 					 cluster_of_pages, mmap_page);
-	if (ret) {
+	if (ret && ret != -EAGAIN) {
 		mlog_errno(ret);
 		goto out_quota;
 	}
 
+	/*
+	 * ocfs2_grab_pages_for_write() returns -EAGAIN if it could not lock
+	 * the target page. In this case, we exit with no error and no target
+	 * page. This will trigger the caller, page_mkwrite(), to re-try
+	 * the operation.
+	 */
+	if (ret == -EAGAIN) {
+		BUG_ON(wc->w_target_page);
+		ret = 0;
+		goto out_quota;
+	}
+
 	ret = ocfs2_write_cluster_by_desc(mapping, data_ac, meta_ac, wc, pos,
 					  len);
 	if (ret) {
diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
index 75cf3ad..ffb2da3 100644
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@@ -78,6 +78,7 @@
 	OCFS2_IOCB_RW_LOCK = 0,
 	OCFS2_IOCB_RW_LOCK_LEVEL,
 	OCFS2_IOCB_SEM,
+	OCFS2_IOCB_UNALIGNED_IO,
 	OCFS2_IOCB_NUM_LOCKS
 };
 
@@ -91,4 +92,17 @@
 	clear_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
 #define ocfs2_iocb_is_sem_locked(iocb) \
 	test_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
+
+#define ocfs2_iocb_set_unaligned_aio(iocb) \
+	set_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_clear_unaligned_aio(iocb) \
+	clear_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_is_unaligned_aio(iocb) \
+	test_bit(OCFS2_IOCB_UNALIGNED_IO, (unsigned long *)&iocb->private)
+
+#define OCFS2_IOEND_WQ_HASH_SZ	37
+#define ocfs2_ioend_wq(v)   (&ocfs2__ioend_wq[((unsigned long)(v)) %\
+					    OCFS2_IOEND_WQ_HASH_SZ])
+extern wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ];
+
 #endif /* OCFS2_FILE_H */
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 9a3e6bb..a4e855e 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -216,6 +216,7 @@
 
 	struct list_head	hr_all_item;
 	unsigned		hr_unclean_stop:1,
+				hr_aborted_start:1,
 				hr_item_pinned:1,
 				hr_item_dropped:1;
 
@@ -254,6 +255,10 @@
 	 * a more complete api that doesn't lead to this sort of fragility. */
 	atomic_t		hr_steady_iterations;
 
+	/* terminate o2hb thread if it does not reach steady state
+	 * (hr_steady_iterations == 0) within hr_unsteady_iterations */
+	atomic_t		hr_unsteady_iterations;
+
 	char			hr_dev_name[BDEVNAME_SIZE];
 
 	unsigned int		hr_timeout_ms;
@@ -324,6 +329,10 @@
 
 static void o2hb_arm_write_timeout(struct o2hb_region *reg)
 {
+	/* Arm writeout only after thread reaches steady state */
+	if (atomic_read(&reg->hr_steady_iterations) != 0)
+		return;
+
 	mlog(ML_HEARTBEAT, "Queue write timeout for %u ms\n",
 	     O2HB_MAX_WRITE_TIMEOUT_MS);
 
@@ -537,9 +546,14 @@
 	return read == computed;
 }
 
-/* We want to make sure that nobody is heartbeating on top of us --
- * this will help detect an invalid configuration. */
-static void o2hb_check_last_timestamp(struct o2hb_region *reg)
+/*
+ * Compare the slot data with what we wrote in the last iteration.
+ * If the match fails, print an appropriate error message. This is to
+ * detect errors like... another node hearting on the same slot,
+ * flaky device that is losing writes, etc.
+ * Returns 1 if check succeeds, 0 otherwise.
+ */
+static int o2hb_check_own_slot(struct o2hb_region *reg)
 {
 	struct o2hb_disk_slot *slot;
 	struct o2hb_disk_heartbeat_block *hb_block;
@@ -548,13 +562,13 @@
 	slot = &reg->hr_slots[o2nm_this_node()];
 	/* Don't check on our 1st timestamp */
 	if (!slot->ds_last_time)
-		return;
+		return 0;
 
 	hb_block = slot->ds_raw_block;
 	if (le64_to_cpu(hb_block->hb_seq) == slot->ds_last_time &&
 	    le64_to_cpu(hb_block->hb_generation) == slot->ds_last_generation &&
 	    hb_block->hb_node == slot->ds_node_num)
-		return;
+		return 1;
 
 #define ERRSTR1		"Another node is heartbeating on device"
 #define ERRSTR2		"Heartbeat generation mismatch on device"
@@ -574,6 +588,8 @@
 	     (unsigned long long)slot->ds_last_time, hb_block->hb_node,
 	     (unsigned long long)le64_to_cpu(hb_block->hb_generation),
 	     (unsigned long long)le64_to_cpu(hb_block->hb_seq));
+
+	return 0;
 }
 
 static inline void o2hb_prepare_block(struct o2hb_region *reg,
@@ -719,17 +735,24 @@
 	o2nm_node_put(node);
 }
 
-static void o2hb_set_quorum_device(struct o2hb_region *reg,
-				   struct o2hb_disk_slot *slot)
+static void o2hb_set_quorum_device(struct o2hb_region *reg)
 {
-	assert_spin_locked(&o2hb_live_lock);
-
 	if (!o2hb_global_heartbeat_active())
 		return;
 
-	if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap))
+	/* Prevent race with o2hb_heartbeat_group_drop_item() */
+	if (kthread_should_stop())
 		return;
 
+	/* Tag region as quorum only after thread reaches steady state */
+	if (atomic_read(&reg->hr_steady_iterations) != 0)
+		return;
+
+	spin_lock(&o2hb_live_lock);
+
+	if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap))
+		goto unlock;
+
 	/*
 	 * A region can be added to the quorum only when it sees all
 	 * live nodes heartbeat on it. In other words, the region has been
@@ -737,13 +760,10 @@
 	 */
 	if (memcmp(reg->hr_live_node_bitmap, o2hb_live_node_bitmap,
 		   sizeof(o2hb_live_node_bitmap)))
-		return;
+		goto unlock;
 
-	if (slot->ds_changed_samples < O2HB_LIVE_THRESHOLD)
-		return;
-
-	printk(KERN_NOTICE "o2hb: Region %s is now a quorum device\n",
-	       config_item_name(&reg->hr_item));
+	printk(KERN_NOTICE "o2hb: Region %s (%s) is now a quorum device\n",
+	       config_item_name(&reg->hr_item), reg->hr_dev_name);
 
 	set_bit(reg->hr_region_num, o2hb_quorum_region_bitmap);
 
@@ -754,6 +774,8 @@
 	if (o2hb_pop_count(&o2hb_quorum_region_bitmap,
 			   O2NM_MAX_REGIONS) > O2HB_PIN_CUT_OFF)
 		o2hb_region_unpin(NULL);
+unlock:
+	spin_unlock(&o2hb_live_lock);
 }
 
 static int o2hb_check_slot(struct o2hb_region *reg,
@@ -925,8 +947,6 @@
 		slot->ds_equal_samples = 0;
 	}
 out:
-	o2hb_set_quorum_device(reg, slot);
-
 	spin_unlock(&o2hb_live_lock);
 
 	o2hb_run_event_list(&event);
@@ -957,7 +977,8 @@
 
 static int o2hb_do_disk_heartbeat(struct o2hb_region *reg)
 {
-	int i, ret, highest_node, change = 0;
+	int i, ret, highest_node;
+	int membership_change = 0, own_slot_ok = 0;
 	unsigned long configured_nodes[BITS_TO_LONGS(O2NM_MAX_NODES)];
 	unsigned long live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
 	struct o2hb_bio_wait_ctxt write_wc;
@@ -966,7 +987,7 @@
 				       sizeof(configured_nodes));
 	if (ret) {
 		mlog_errno(ret);
-		return ret;
+		goto bail;
 	}
 
 	/*
@@ -982,8 +1003,9 @@
 
 	highest_node = o2hb_highest_node(configured_nodes, O2NM_MAX_NODES);
 	if (highest_node >= O2NM_MAX_NODES) {
-		mlog(ML_NOTICE, "ocfs2_heartbeat: no configured nodes found!\n");
-		return -EINVAL;
+		mlog(ML_NOTICE, "o2hb: No configured nodes found!\n");
+		ret = -EINVAL;
+		goto bail;
 	}
 
 	/* No sense in reading the slots of nodes that don't exist
@@ -993,29 +1015,27 @@
 	ret = o2hb_read_slots(reg, highest_node + 1);
 	if (ret < 0) {
 		mlog_errno(ret);
-		return ret;
+		goto bail;
 	}
 
 	/* With an up to date view of the slots, we can check that no
 	 * other node has been improperly configured to heartbeat in
 	 * our slot. */
-	o2hb_check_last_timestamp(reg);
+	own_slot_ok = o2hb_check_own_slot(reg);
 
 	/* fill in the proper info for our next heartbeat */
 	o2hb_prepare_block(reg, reg->hr_generation);
 
-	/* And fire off the write. Note that we don't wait on this I/O
-	 * until later. */
 	ret = o2hb_issue_node_write(reg, &write_wc);
 	if (ret < 0) {
 		mlog_errno(ret);
-		return ret;
+		goto bail;
 	}
 
 	i = -1;
 	while((i = find_next_bit(configured_nodes,
 				 O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) {
-		change |= o2hb_check_slot(reg, &reg->hr_slots[i]);
+		membership_change |= o2hb_check_slot(reg, &reg->hr_slots[i]);
 	}
 
 	/*
@@ -1030,18 +1050,39 @@
 		 * disk */
 		mlog(ML_ERROR, "Write error %d on device \"%s\"\n",
 		     write_wc.wc_error, reg->hr_dev_name);
-		return write_wc.wc_error;
+		ret = write_wc.wc_error;
+		goto bail;
 	}
 
-	o2hb_arm_write_timeout(reg);
+	/* Skip disarming the timeout if own slot has stale/bad data */
+	if (own_slot_ok) {
+		o2hb_set_quorum_device(reg);
+		o2hb_arm_write_timeout(reg);
+	}
 
+bail:
 	/* let the person who launched us know when things are steady */
-	if (!change && (atomic_read(&reg->hr_steady_iterations) != 0)) {
-		if (atomic_dec_and_test(&reg->hr_steady_iterations))
-			wake_up(&o2hb_steady_queue);
+	if (atomic_read(&reg->hr_steady_iterations) != 0) {
+		if (!ret && own_slot_ok && !membership_change) {
+			if (atomic_dec_and_test(&reg->hr_steady_iterations))
+				wake_up(&o2hb_steady_queue);
+		}
 	}
 
-	return 0;
+	if (atomic_read(&reg->hr_steady_iterations) != 0) {
+		if (atomic_dec_and_test(&reg->hr_unsteady_iterations)) {
+			printk(KERN_NOTICE "o2hb: Unable to stabilize "
+			       "heartbeart on region %s (%s)\n",
+			       config_item_name(&reg->hr_item),
+			       reg->hr_dev_name);
+			atomic_set(&reg->hr_steady_iterations, 0);
+			reg->hr_aborted_start = 1;
+			wake_up(&o2hb_steady_queue);
+			ret = -EIO;
+		}
+	}
+
+	return ret;
 }
 
 /* Subtract b from a, storing the result in a. a *must* have a larger
@@ -1095,7 +1136,8 @@
 	/* Pin node */
 	o2nm_depend_this_node();
 
-	while (!kthread_should_stop() && !reg->hr_unclean_stop) {
+	while (!kthread_should_stop() &&
+	       !reg->hr_unclean_stop && !reg->hr_aborted_start) {
 		/* We track the time spent inside
 		 * o2hb_do_disk_heartbeat so that we avoid more than
 		 * hr_timeout_ms between disk writes. On busy systems
@@ -1103,10 +1145,7 @@
 		 * likely to time itself out. */
 		do_gettimeofday(&before_hb);
 
-		i = 0;
-		do {
-			ret = o2hb_do_disk_heartbeat(reg);
-		} while (ret && ++i < 2);
+		ret = o2hb_do_disk_heartbeat(reg);
 
 		do_gettimeofday(&after_hb);
 		elapsed_msec = o2hb_elapsed_msecs(&before_hb, &after_hb);
@@ -1117,7 +1156,8 @@
 		     after_hb.tv_sec, (unsigned long) after_hb.tv_usec,
 		     elapsed_msec);
 
-		if (elapsed_msec < reg->hr_timeout_ms) {
+		if (!kthread_should_stop() &&
+		    elapsed_msec < reg->hr_timeout_ms) {
 			/* the kthread api has blocked signals for us so no
 			 * need to record the return value. */
 			msleep_interruptible(reg->hr_timeout_ms - elapsed_msec);
@@ -1134,20 +1174,20 @@
 	 * to timeout on this region when we could just as easily
 	 * write a clear generation - thus indicating to them that
 	 * this node has left this region.
-	 *
-	 * XXX: Should we skip this on unclean_stop? */
-	o2hb_prepare_block(reg, 0);
-	ret = o2hb_issue_node_write(reg, &write_wc);
-	if (ret == 0) {
-		o2hb_wait_on_io(reg, &write_wc);
-	} else {
-		mlog_errno(ret);
+	 */
+	if (!reg->hr_unclean_stop && !reg->hr_aborted_start) {
+		o2hb_prepare_block(reg, 0);
+		ret = o2hb_issue_node_write(reg, &write_wc);
+		if (ret == 0)
+			o2hb_wait_on_io(reg, &write_wc);
+		else
+			mlog_errno(ret);
 	}
 
 	/* Unpin node */
 	o2nm_undepend_this_node();
 
-	mlog(ML_HEARTBEAT|ML_KTHREAD, "hb thread exiting\n");
+	mlog(ML_HEARTBEAT|ML_KTHREAD, "o2hb thread exiting\n");
 
 	return 0;
 }
@@ -1158,6 +1198,7 @@
 	struct o2hb_debug_buf *db = inode->i_private;
 	struct o2hb_region *reg;
 	unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)];
+	unsigned long lts;
 	char *buf = NULL;
 	int i = -1;
 	int out = 0;
@@ -1194,9 +1235,11 @@
 
 	case O2HB_DB_TYPE_REGION_ELAPSED_TIME:
 		reg = (struct o2hb_region *)db->db_data;
-		out += snprintf(buf + out, PAGE_SIZE - out, "%u\n",
-				jiffies_to_msecs(jiffies -
-						 reg->hr_last_timeout_start));
+		lts = reg->hr_last_timeout_start;
+		/* If 0, it has never been set before */
+		if (lts)
+			lts = jiffies_to_msecs(jiffies - lts);
+		out += snprintf(buf + out, PAGE_SIZE - out, "%lu\n", lts);
 		goto done;
 
 	case O2HB_DB_TYPE_REGION_PINNED:
@@ -1426,6 +1469,8 @@
 	struct page *page;
 	struct o2hb_region *reg = to_o2hb_region(item);
 
+	mlog(ML_HEARTBEAT, "hb region release (%s)\n", reg->hr_dev_name);
+
 	if (reg->hr_tmp_block)
 		kfree(reg->hr_tmp_block);
 
@@ -1792,7 +1837,10 @@
 			live_threshold <<= 1;
 		spin_unlock(&o2hb_live_lock);
 	}
-	atomic_set(&reg->hr_steady_iterations, live_threshold + 1);
+	++live_threshold;
+	atomic_set(&reg->hr_steady_iterations, live_threshold);
+	/* unsteady_iterations is double the steady_iterations */
+	atomic_set(&reg->hr_unsteady_iterations, (live_threshold << 1));
 
 	hb_task = kthread_run(o2hb_thread, reg, "o2hb-%s",
 			      reg->hr_item.ci_name);
@@ -1809,14 +1857,12 @@
 	ret = wait_event_interruptible(o2hb_steady_queue,
 				atomic_read(&reg->hr_steady_iterations) == 0);
 	if (ret) {
-		/* We got interrupted (hello ptrace!).  Clean up */
-		spin_lock(&o2hb_live_lock);
-		hb_task = reg->hr_task;
-		reg->hr_task = NULL;
-		spin_unlock(&o2hb_live_lock);
+		atomic_set(&reg->hr_steady_iterations, 0);
+		reg->hr_aborted_start = 1;
+	}
 
-		if (hb_task)
-			kthread_stop(hb_task);
+	if (reg->hr_aborted_start) {
+		ret = -EIO;
 		goto out;
 	}
 
@@ -1833,8 +1879,8 @@
 		ret = -EIO;
 
 	if (hb_task && o2hb_global_heartbeat_active())
-		printk(KERN_NOTICE "o2hb: Heartbeat started on region %s\n",
-		       config_item_name(&reg->hr_item));
+		printk(KERN_NOTICE "o2hb: Heartbeat started on region %s (%s)\n",
+		       config_item_name(&reg->hr_item), reg->hr_dev_name);
 
 out:
 	if (filp)
@@ -2092,13 +2138,6 @@
 
 	/* stop the thread when the user removes the region dir */
 	spin_lock(&o2hb_live_lock);
-	if (o2hb_global_heartbeat_active()) {
-		clear_bit(reg->hr_region_num, o2hb_region_bitmap);
-		clear_bit(reg->hr_region_num, o2hb_live_region_bitmap);
-		if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap))
-			quorum_region = 1;
-		clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap);
-	}
 	hb_task = reg->hr_task;
 	reg->hr_task = NULL;
 	reg->hr_item_dropped = 1;
@@ -2107,19 +2146,30 @@
 	if (hb_task)
 		kthread_stop(hb_task);
 
+	if (o2hb_global_heartbeat_active()) {
+		spin_lock(&o2hb_live_lock);
+		clear_bit(reg->hr_region_num, o2hb_region_bitmap);
+		clear_bit(reg->hr_region_num, o2hb_live_region_bitmap);
+		if (test_bit(reg->hr_region_num, o2hb_quorum_region_bitmap))
+			quorum_region = 1;
+		clear_bit(reg->hr_region_num, o2hb_quorum_region_bitmap);
+		spin_unlock(&o2hb_live_lock);
+		printk(KERN_NOTICE "o2hb: Heartbeat %s on region %s (%s)\n",
+		       ((atomic_read(&reg->hr_steady_iterations) == 0) ?
+			"stopped" : "start aborted"), config_item_name(item),
+		       reg->hr_dev_name);
+	}
+
 	/*
 	 * If we're racing a dev_write(), we need to wake them.  They will
 	 * check reg->hr_task
 	 */
 	if (atomic_read(&reg->hr_steady_iterations) != 0) {
+		reg->hr_aborted_start = 1;
 		atomic_set(&reg->hr_steady_iterations, 0);
 		wake_up(&o2hb_steady_queue);
 	}
 
-	if (o2hb_global_heartbeat_active())
-		printk(KERN_NOTICE "o2hb: Heartbeat stopped on region %s\n",
-		       config_item_name(&reg->hr_item));
-
 	config_item_put(item);
 
 	if (!o2hb_global_heartbeat_active() || !quorum_region)
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index 3a583590..dc45deb 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -47,6 +47,7 @@
 #define SC_DEBUG_NAME		"sock_containers"
 #define NST_DEBUG_NAME		"send_tracking"
 #define STATS_DEBUG_NAME	"stats"
+#define NODES_DEBUG_NAME	"connected_nodes"
 
 #define SHOW_SOCK_CONTAINERS	0
 #define SHOW_SOCK_STATS		1
@@ -55,6 +56,7 @@
 static struct dentry *sc_dentry;
 static struct dentry *nst_dentry;
 static struct dentry *stats_dentry;
+static struct dentry *nodes_dentry;
 
 static DEFINE_SPINLOCK(o2net_debug_lock);
 
@@ -491,53 +493,87 @@
 	.release = sc_fop_release,
 };
 
-int o2net_debugfs_init(void)
+static int o2net_fill_bitmap(char *buf, int len)
 {
-	o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL);
-	if (!o2net_dentry) {
-		mlog_errno(-ENOMEM);
-		goto bail;
-	}
+	unsigned long map[BITS_TO_LONGS(O2NM_MAX_NODES)];
+	int i = -1, out = 0;
 
-	nst_dentry = debugfs_create_file(NST_DEBUG_NAME, S_IFREG|S_IRUSR,
-					 o2net_dentry, NULL,
-					 &nst_seq_fops);
-	if (!nst_dentry) {
-		mlog_errno(-ENOMEM);
-		goto bail;
-	}
+	o2net_fill_node_map(map, sizeof(map));
 
-	sc_dentry = debugfs_create_file(SC_DEBUG_NAME, S_IFREG|S_IRUSR,
-					o2net_dentry, NULL,
-					&sc_seq_fops);
-	if (!sc_dentry) {
-		mlog_errno(-ENOMEM);
-		goto bail;
-	}
+	while ((i = find_next_bit(map, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES)
+		out += snprintf(buf + out, PAGE_SIZE - out, "%d ", i);
+	out += snprintf(buf + out, PAGE_SIZE - out, "\n");
 
-	stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, S_IFREG|S_IRUSR,
-					   o2net_dentry, NULL,
-					   &stats_seq_fops);
-	if (!stats_dentry) {
-		mlog_errno(-ENOMEM);
-		goto bail;
-	}
+	return out;
+}
+
+static int nodes_fop_open(struct inode *inode, struct file *file)
+{
+	char *buf;
+
+	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	i_size_write(inode, o2net_fill_bitmap(buf, PAGE_SIZE));
+
+	file->private_data = buf;
 
 	return 0;
-bail:
-	debugfs_remove(stats_dentry);
-	debugfs_remove(sc_dentry);
-	debugfs_remove(nst_dentry);
-	debugfs_remove(o2net_dentry);
-	return -ENOMEM;
 }
 
+static int o2net_debug_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static ssize_t o2net_debug_read(struct file *file, char __user *buf,
+				size_t nbytes, loff_t *ppos)
+{
+	return simple_read_from_buffer(buf, nbytes, ppos, file->private_data,
+				       i_size_read(file->f_mapping->host));
+}
+
+static const struct file_operations nodes_fops = {
+	.open		= nodes_fop_open,
+	.release	= o2net_debug_release,
+	.read		= o2net_debug_read,
+	.llseek		= generic_file_llseek,
+};
+
 void o2net_debugfs_exit(void)
 {
+	debugfs_remove(nodes_dentry);
 	debugfs_remove(stats_dentry);
 	debugfs_remove(sc_dentry);
 	debugfs_remove(nst_dentry);
 	debugfs_remove(o2net_dentry);
 }
 
+int o2net_debugfs_init(void)
+{
+	mode_t mode = S_IFREG|S_IRUSR;
+
+	o2net_dentry = debugfs_create_dir(O2NET_DEBUG_DIR, NULL);
+	if (o2net_dentry)
+		nst_dentry = debugfs_create_file(NST_DEBUG_NAME, mode,
+					o2net_dentry, NULL, &nst_seq_fops);
+	if (nst_dentry)
+		sc_dentry = debugfs_create_file(SC_DEBUG_NAME, mode,
+					o2net_dentry, NULL, &sc_seq_fops);
+	if (sc_dentry)
+		stats_dentry = debugfs_create_file(STATS_DEBUG_NAME, mode,
+					o2net_dentry, NULL, &stats_seq_fops);
+	if (stats_dentry)
+		nodes_dentry = debugfs_create_file(NODES_DEBUG_NAME, mode,
+					o2net_dentry, NULL, &nodes_fops);
+	if (nodes_dentry)
+		return 0;
+
+	o2net_debugfs_exit();
+	mlog_errno(-ENOMEM);
+	return -ENOMEM;
+}
+
 #endif	/* CONFIG_DEBUG_FS */
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index db5ee4b..044e7b5 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -59,6 +59,7 @@
 #include <linux/idr.h>
 #include <linux/kref.h>
 #include <linux/net.h>
+#include <linux/export.h>
 #include <net/tcp.h>
 
 #include <asm/uaccess.h>
@@ -545,7 +546,7 @@
 	}
 
 	if (was_valid && !valid) {
-		printk(KERN_NOTICE "o2net: no longer connected to "
+		printk(KERN_NOTICE "o2net: No longer connected to "
 		       SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc));
 		o2net_complete_nodes_nsw(nn);
 	}
@@ -555,7 +556,7 @@
 		cancel_delayed_work(&nn->nn_connect_expired);
 		printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n",
 		       o2nm_this_node() > sc->sc_node->nd_num ?
-		       		"connected to" : "accepted connection from",
+		       "Connected to" : "Accepted connection from",
 		       SC_NODEF_ARGS(sc));
 	}
 
@@ -643,7 +644,7 @@
 			o2net_sc_queue_work(sc, &sc->sc_connect_work);
 			break;
 		default:
-			printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT
+			printk(KERN_INFO "o2net: Connection to " SC_NODEF_FMT
 			      " shutdown, state %d\n",
 			      SC_NODEF_ARGS(sc), sk->sk_state);
 			o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
@@ -1034,6 +1035,25 @@
 	return ret;
 }
 
+/* Get a map of all nodes to which this node is currently connected to */
+void o2net_fill_node_map(unsigned long *map, unsigned bytes)
+{
+	struct o2net_sock_container *sc;
+	int node, ret;
+
+	BUG_ON(bytes < (BITS_TO_LONGS(O2NM_MAX_NODES) * sizeof(unsigned long)));
+
+	memset(map, 0, bytes);
+	for (node = 0; node < O2NM_MAX_NODES; ++node) {
+		o2net_tx_can_proceed(o2net_nn_from_num(node), &sc, &ret);
+		if (!ret) {
+			set_bit(node, map);
+			sc_put(sc);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(o2net_fill_node_map);
+
 int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 			   size_t caller_veclen, u8 target_node, int *status)
 {
@@ -1284,11 +1304,11 @@
 	struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num);
 
 	if (hand->protocol_version != cpu_to_be64(O2NET_PROTOCOL_VERSION)) {
-		mlog(ML_NOTICE, SC_NODEF_FMT " advertised net protocol "
-		     "version %llu but %llu is required, disconnecting\n",
-		     SC_NODEF_ARGS(sc),
-		     (unsigned long long)be64_to_cpu(hand->protocol_version),
-		     O2NET_PROTOCOL_VERSION);
+		printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " Advertised net "
+		       "protocol version %llu but %llu is required. "
+		       "Disconnecting.\n", SC_NODEF_ARGS(sc),
+		       (unsigned long long)be64_to_cpu(hand->protocol_version),
+		       O2NET_PROTOCOL_VERSION);
 
 		/* don't bother reconnecting if its the wrong version. */
 		o2net_ensure_shutdown(nn, sc, -ENOTCONN);
@@ -1302,33 +1322,33 @@
 	 */
 	if (be32_to_cpu(hand->o2net_idle_timeout_ms) !=
 				o2net_idle_timeout()) {
-		mlog(ML_NOTICE, SC_NODEF_FMT " uses a network idle timeout of "
-		     "%u ms, but we use %u ms locally.  disconnecting\n",
-		     SC_NODEF_ARGS(sc),
-		     be32_to_cpu(hand->o2net_idle_timeout_ms),
-		     o2net_idle_timeout());
+		printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a network "
+		       "idle timeout of %u ms, but we use %u ms locally. "
+		       "Disconnecting.\n", SC_NODEF_ARGS(sc),
+		       be32_to_cpu(hand->o2net_idle_timeout_ms),
+		       o2net_idle_timeout());
 		o2net_ensure_shutdown(nn, sc, -ENOTCONN);
 		return -1;
 	}
 
 	if (be32_to_cpu(hand->o2net_keepalive_delay_ms) !=
 			o2net_keepalive_delay()) {
-		mlog(ML_NOTICE, SC_NODEF_FMT " uses a keepalive delay of "
-		     "%u ms, but we use %u ms locally.  disconnecting\n",
-		     SC_NODEF_ARGS(sc),
-		     be32_to_cpu(hand->o2net_keepalive_delay_ms),
-		     o2net_keepalive_delay());
+		printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a keepalive "
+		       "delay of %u ms, but we use %u ms locally. "
+		       "Disconnecting.\n", SC_NODEF_ARGS(sc),
+		       be32_to_cpu(hand->o2net_keepalive_delay_ms),
+		       o2net_keepalive_delay());
 		o2net_ensure_shutdown(nn, sc, -ENOTCONN);
 		return -1;
 	}
 
 	if (be32_to_cpu(hand->o2hb_heartbeat_timeout_ms) !=
 			O2HB_MAX_WRITE_TIMEOUT_MS) {
-		mlog(ML_NOTICE, SC_NODEF_FMT " uses a heartbeat timeout of "
-		     "%u ms, but we use %u ms locally.  disconnecting\n",
-		     SC_NODEF_ARGS(sc),
-		     be32_to_cpu(hand->o2hb_heartbeat_timeout_ms),
-		     O2HB_MAX_WRITE_TIMEOUT_MS);
+		printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a heartbeat "
+		       "timeout of %u ms, but we use %u ms locally. "
+		       "Disconnecting.\n", SC_NODEF_ARGS(sc),
+		       be32_to_cpu(hand->o2hb_heartbeat_timeout_ms),
+		       O2HB_MAX_WRITE_TIMEOUT_MS);
 		o2net_ensure_shutdown(nn, sc, -ENOTCONN);
 		return -1;
 	}
@@ -1539,28 +1559,16 @@
 {
 	struct o2net_sock_container *sc = (struct o2net_sock_container *)data;
 	struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num);
-
 #ifdef CONFIG_DEBUG_FS
-	ktime_t now = ktime_get();
+	unsigned long msecs = ktime_to_ms(ktime_get()) -
+		ktime_to_ms(sc->sc_tv_timer);
+#else
+	unsigned long msecs = o2net_idle_timeout();
 #endif
 
-	printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
-	     "seconds, shutting it down.\n", SC_NODEF_ARGS(sc),
-		     o2net_idle_timeout() / 1000,
-		     o2net_idle_timeout() % 1000);
-
-#ifdef CONFIG_DEBUG_FS
-	mlog(ML_NOTICE, "Here are some times that might help debug the "
-	     "situation: (Timer: %lld, Now %lld, DataReady %lld, Advance %lld-%lld, "
-	     "Key 0x%08x, Func %u, FuncTime %lld-%lld)\n",
-	     (long long)ktime_to_us(sc->sc_tv_timer), (long long)ktime_to_us(now),
-	     (long long)ktime_to_us(sc->sc_tv_data_ready),
-	     (long long)ktime_to_us(sc->sc_tv_advance_start),
-	     (long long)ktime_to_us(sc->sc_tv_advance_stop),
-	     sc->sc_msg_key, sc->sc_msg_type,
-	     (long long)ktime_to_us(sc->sc_tv_func_start),
-	     (long long)ktime_to_us(sc->sc_tv_func_stop));
-#endif
+	printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been "
+	       "idle for %lu.%lu secs, shutting it down.\n", SC_NODEF_ARGS(sc),
+	       msecs / 1000, msecs % 1000);
 
 	/*
 	 * Initialize the nn_timeout so that the next connection attempt
@@ -1693,8 +1701,8 @@
 
 out:
 	if (ret) {
-		mlog(ML_NOTICE, "connect attempt to " SC_NODEF_FMT " failed "
-		     "with errno %d\n", SC_NODEF_ARGS(sc), ret);
+		printk(KERN_NOTICE "o2net: Connect attempt to " SC_NODEF_FMT
+		       " failed with errno %d\n", SC_NODEF_ARGS(sc), ret);
 		/* 0 err so that another will be queued and attempted
 		 * from set_nn_state */
 		if (sc)
@@ -1717,8 +1725,8 @@
 
 	spin_lock(&nn->nn_lock);
 	if (!nn->nn_sc_valid) {
-		mlog(ML_ERROR, "no connection established with node %u after "
-		     "%u.%u seconds, giving up and returning errors.\n",
+		printk(KERN_NOTICE "o2net: No connection established with "
+		       "node %u after %u.%u seconds, giving up.\n",
 		     o2net_num_from_nn(nn),
 		     o2net_idle_timeout() / 1000,
 		     o2net_idle_timeout() % 1000);
@@ -1861,21 +1869,21 @@
 
 	node = o2nm_get_node_by_ip(sin.sin_addr.s_addr);
 	if (node == NULL) {
-		mlog(ML_NOTICE, "attempt to connect from unknown node at %pI4:%d\n",
-		     &sin.sin_addr.s_addr, ntohs(sin.sin_port));
+		printk(KERN_NOTICE "o2net: Attempt to connect from unknown "
+		       "node at %pI4:%d\n", &sin.sin_addr.s_addr,
+		       ntohs(sin.sin_port));
 		ret = -EINVAL;
 		goto out;
 	}
 
 	if (o2nm_this_node() >= node->nd_num) {
 		local_node = o2nm_get_node_by_num(o2nm_this_node());
-		mlog(ML_NOTICE, "unexpected connect attempt seen at node '%s' ("
-		     "%u, %pI4:%d) from node '%s' (%u, %pI4:%d)\n",
-		     local_node->nd_name, local_node->nd_num,
-		     &(local_node->nd_ipv4_address),
-		     ntohs(local_node->nd_ipv4_port),
-		     node->nd_name, node->nd_num, &sin.sin_addr.s_addr,
-		     ntohs(sin.sin_port));
+		printk(KERN_NOTICE "o2net: Unexpected connect attempt seen "
+		       "at node '%s' (%u, %pI4:%d) from node '%s' (%u, "
+		       "%pI4:%d)\n", local_node->nd_name, local_node->nd_num,
+		       &(local_node->nd_ipv4_address),
+		       ntohs(local_node->nd_ipv4_port), node->nd_name,
+		       node->nd_num, &sin.sin_addr.s_addr, ntohs(sin.sin_port));
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1900,10 +1908,10 @@
 		ret = 0;
 	spin_unlock(&nn->nn_lock);
 	if (ret) {
-		mlog(ML_NOTICE, "attempt to connect from node '%s' at "
-		     "%pI4:%d but it already has an open connection\n",
-		     node->nd_name, &sin.sin_addr.s_addr,
-		     ntohs(sin.sin_port));
+		printk(KERN_NOTICE "o2net: Attempt to connect from node '%s' "
+		       "at %pI4:%d but it already has an open connection\n",
+		       node->nd_name, &sin.sin_addr.s_addr,
+		       ntohs(sin.sin_port));
 		goto out;
 	}
 
@@ -1983,7 +1991,7 @@
 
 	ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
 	if (ret < 0) {
-		mlog(ML_ERROR, "unable to create socket, ret=%d\n", ret);
+		printk(KERN_ERR "o2net: Error %d while creating socket\n", ret);
 		goto out;
 	}
 
@@ -2000,16 +2008,15 @@
 	sock->sk->sk_reuse = 1;
 	ret = sock->ops->bind(sock, (struct sockaddr *)&sin, sizeof(sin));
 	if (ret < 0) {
-		mlog(ML_ERROR, "unable to bind socket at %pI4:%u, "
-		     "ret=%d\n", &addr, ntohs(port), ret);
+		printk(KERN_ERR "o2net: Error %d while binding socket at "
+		       "%pI4:%u\n", ret, &addr, ntohs(port)); 
 		goto out;
 	}
 
 	ret = sock->ops->listen(sock, 64);
-	if (ret < 0) {
-		mlog(ML_ERROR, "unable to listen on %pI4:%u, ret=%d\n",
-		     &addr, ntohs(port), ret);
-	}
+	if (ret < 0)
+		printk(KERN_ERR "o2net: Error %d while listening on %pI4:%u\n",
+		       ret, &addr, ntohs(port));
 
 out:
 	if (ret) {
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index fd6179e..5bada2a 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -106,6 +106,8 @@
 			   struct list_head *unreg_list);
 void o2net_unregister_handler_list(struct list_head *list);
 
+void o2net_fill_node_map(unsigned long *map, unsigned bytes);
+
 struct o2nm_node;
 int o2net_register_hb_callbacks(void);
 void o2net_unregister_hb_callbacks(void);
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index e2878b5..8fe4e28 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1184,8 +1184,7 @@
 			if (pde)
 				le16_add_cpu(&pde->rec_len,
 						le16_to_cpu(de->rec_len));
-			else
-				de->inode = 0;
+			de->inode = 0;
 			dir->i_version++;
 			ocfs2_journal_dirty(handle, bh);
 			goto bail;
diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h
index d602abb..a5952ce 100644
--- a/fs/ocfs2/dlm/dlmcommon.h
+++ b/fs/ocfs2/dlm/dlmcommon.h
@@ -859,8 +859,8 @@
 void dlm_wait_for_recovery(struct dlm_ctxt *dlm);
 void dlm_kick_recovery_thread(struct dlm_ctxt *dlm);
 int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node);
-int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout);
-int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout);
+void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout);
+void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout);
 
 void dlm_put(struct dlm_ctxt *dlm);
 struct dlm_ctxt *dlm_grab(struct dlm_ctxt *dlm);
@@ -877,9 +877,8 @@
 	kref_get(&res->refs);
 }
 void dlm_lockres_put(struct dlm_lock_resource *res);
-void __dlm_unhash_lockres(struct dlm_lock_resource *res);
-void __dlm_insert_lockres(struct dlm_ctxt *dlm,
-			  struct dlm_lock_resource *res);
+void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res);
+void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res);
 struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm,
 						     const char *name,
 						     unsigned int len,
@@ -902,46 +901,15 @@
 					  const char *name,
 					  unsigned int namelen);
 
-#define dlm_lockres_set_refmap_bit(bit,res)  \
-	__dlm_lockres_set_refmap_bit(bit,res,__FILE__,__LINE__)
-#define dlm_lockres_clear_refmap_bit(bit,res)  \
-	__dlm_lockres_clear_refmap_bit(bit,res,__FILE__,__LINE__)
+void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm,
+				struct dlm_lock_resource *res, int bit);
+void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm,
+				  struct dlm_lock_resource *res, int bit);
 
-static inline void __dlm_lockres_set_refmap_bit(int bit,
-						struct dlm_lock_resource *res,
-						const char *file,
-						int line)
-{
-	//printk("%s:%d:%.*s: setting bit %d\n", file, line,
-	//     res->lockname.len, res->lockname.name, bit);
-	set_bit(bit, res->refmap);
-}
-
-static inline void __dlm_lockres_clear_refmap_bit(int bit,
-						  struct dlm_lock_resource *res,
-						  const char *file,
-						  int line)
-{
-	//printk("%s:%d:%.*s: clearing bit %d\n", file, line,
-	//     res->lockname.len, res->lockname.name, bit);
-	clear_bit(bit, res->refmap);
-}
-
-void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
-				   struct dlm_lock_resource *res,
-				   const char *file,
-				   int line);
-void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
-				   struct dlm_lock_resource *res,
-				   int new_lockres,
-				   const char *file,
-				   int line);
-#define dlm_lockres_drop_inflight_ref(d,r)  \
-	__dlm_lockres_drop_inflight_ref(d,r,__FILE__,__LINE__)
-#define dlm_lockres_grab_inflight_ref(d,r)  \
-	__dlm_lockres_grab_inflight_ref(d,r,0,__FILE__,__LINE__)
-#define dlm_lockres_grab_inflight_ref_new(d,r)  \
-	__dlm_lockres_grab_inflight_ref(d,r,1,__FILE__,__LINE__)
+void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
+				   struct dlm_lock_resource *res);
+void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+				   struct dlm_lock_resource *res);
 
 void dlm_queue_ast(struct dlm_ctxt *dlm, struct dlm_lock *lock);
 void dlm_queue_bast(struct dlm_ctxt *dlm, struct dlm_lock *lock);
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 56f82cb..0e28e24 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -30,6 +30,7 @@
 #include <linux/sysctl.h>
 #include <linux/spinlock.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 
 #include "cluster/heartbeat.h"
 #include "cluster/nodemanager.h"
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6ed6b95..92f2ead 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -157,16 +157,18 @@
 
 static void dlm_unregister_domain_handlers(struct dlm_ctxt *dlm);
 
-void __dlm_unhash_lockres(struct dlm_lock_resource *lockres)
+void __dlm_unhash_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res)
 {
-	if (!hlist_unhashed(&lockres->hash_node)) {
-		hlist_del_init(&lockres->hash_node);
-		dlm_lockres_put(lockres);
-	}
+	if (hlist_unhashed(&res->hash_node))
+		return;
+
+	mlog(0, "%s: Unhash res %.*s\n", dlm->name, res->lockname.len,
+	     res->lockname.name);
+	hlist_del_init(&res->hash_node);
+	dlm_lockres_put(res);
 }
 
-void __dlm_insert_lockres(struct dlm_ctxt *dlm,
-		       struct dlm_lock_resource *res)
+void __dlm_insert_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res)
 {
 	struct hlist_head *bucket;
 	struct qstr *q;
@@ -180,6 +182,9 @@
 	dlm_lockres_get(res);
 
 	hlist_add_head(&res->hash_node, bucket);
+
+	mlog(0, "%s: Hash res %.*s\n", dlm->name, res->lockname.len,
+	     res->lockname.name);
 }
 
 struct dlm_lock_resource * __dlm_lookup_lockres_full(struct dlm_ctxt *dlm,
@@ -539,17 +544,17 @@
 
 static void __dlm_print_nodes(struct dlm_ctxt *dlm)
 {
-	int node = -1;
+	int node = -1, num = 0;
 
 	assert_spin_locked(&dlm->spinlock);
 
-	printk(KERN_NOTICE "o2dlm: Nodes in domain %s: ", dlm->name);
-
+	printk("( ");
 	while ((node = find_next_bit(dlm->domain_map, O2NM_MAX_NODES,
 				     node + 1)) < O2NM_MAX_NODES) {
 		printk("%d ", node);
+		++num;
 	}
-	printk("\n");
+	printk(") %u nodes\n", num);
 }
 
 static int dlm_exit_domain_handler(struct o2net_msg *msg, u32 len, void *data,
@@ -566,11 +571,10 @@
 
 	node = exit_msg->node_idx;
 
-	printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s\n", node, dlm->name);
-
 	spin_lock(&dlm->spinlock);
 	clear_bit(node, dlm->domain_map);
 	clear_bit(node, dlm->exit_domain_map);
+	printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s ", node, dlm->name);
 	__dlm_print_nodes(dlm);
 
 	/* notify anything attached to the heartbeat events */
@@ -755,6 +759,7 @@
 
 		dlm_mark_domain_leaving(dlm);
 		dlm_leave_domain(dlm);
+		printk(KERN_NOTICE "o2dlm: Leaving domain %s\n", dlm->name);
 		dlm_force_free_mles(dlm);
 		dlm_complete_dlm_shutdown(dlm);
 	}
@@ -970,7 +975,7 @@
 		clear_bit(assert->node_idx, dlm->exit_domain_map);
 		__dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN);
 
-		printk(KERN_NOTICE "o2dlm: Node %u joins domain %s\n",
+		printk(KERN_NOTICE "o2dlm: Node %u joins domain %s ",
 		       assert->node_idx, dlm->name);
 		__dlm_print_nodes(dlm);
 
@@ -1701,8 +1706,10 @@
 bail:
 	spin_lock(&dlm->spinlock);
 	__dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN);
-	if (!status)
+	if (!status) {
+		printk(KERN_NOTICE "o2dlm: Joining domain %s ", dlm->name);
 		__dlm_print_nodes(dlm);
+	}
 	spin_unlock(&dlm->spinlock);
 
 	if (ctxt) {
@@ -2131,13 +2138,6 @@
 		goto leave;
 	}
 
-	if (!o2hb_check_local_node_heartbeating()) {
-		mlog(ML_ERROR, "the local node has not been configured, or is "
-		     "not heartbeating\n");
-		ret = -EPROTO;
-		goto leave;
-	}
-
 	mlog(0, "register called for domain \"%s\"\n", domain);
 
 retry:
diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c
index 8d39e0fd6..975810b 100644
--- a/fs/ocfs2/dlm/dlmlock.c
+++ b/fs/ocfs2/dlm/dlmlock.c
@@ -183,10 +183,6 @@
 			kick_thread = 1;
 		}
 	}
-	/* reduce the inflight count, this may result in the lockres
-	 * being purged below during calc_usage */
-	if (lock->ml.node == dlm->node_num)
-		dlm_lockres_drop_inflight_ref(dlm, res);
 
 	spin_unlock(&res->spinlock);
 	wake_up(&res->wq);
@@ -231,10 +227,16 @@
 	     lock->ml.type, res->lockname.len,
 	     res->lockname.name, flags);
 
+	/*
+	 * Wait if resource is getting recovered, remastered, etc.
+	 * If the resource was remastered and new owner is self, then exit.
+	 */
 	spin_lock(&res->spinlock);
-
-	/* will exit this call with spinlock held */
 	__dlm_wait_on_lockres(res);
+	if (res->owner == dlm->node_num) {
+		spin_unlock(&res->spinlock);
+		return DLM_RECOVERING;
+	}
 	res->state |= DLM_LOCK_RES_IN_PROGRESS;
 
 	/* add lock to local (secondary) queue */
@@ -319,27 +321,23 @@
 	tmpret = o2net_send_message(DLM_CREATE_LOCK_MSG, dlm->key, &create,
 				    sizeof(create), res->owner, &status);
 	if (tmpret >= 0) {
-		// successfully sent and received
-		ret = status;  // this is already a dlm_status
+		ret = status;
 		if (ret == DLM_REJECTED) {
-			mlog(ML_ERROR, "%s:%.*s: BUG.  this is a stale lockres "
-			     "no longer owned by %u.  that node is coming back "
-			     "up currently.\n", dlm->name, create.namelen,
+			mlog(ML_ERROR, "%s: res %.*s, Stale lockres no longer "
+			     "owned by node %u. That node is coming back up "
+			     "currently.\n", dlm->name, create.namelen,
 			     create.name, res->owner);
 			dlm_print_one_lock_resource(res);
 			BUG();
 		}
 	} else {
-		mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to "
-		     "node %u\n", tmpret, DLM_CREATE_LOCK_MSG, dlm->key,
-		     res->owner);
-		if (dlm_is_host_down(tmpret)) {
+		mlog(ML_ERROR, "%s: res %.*s, Error %d send CREATE LOCK to "
+		     "node %u\n", dlm->name, create.namelen, create.name,
+		     tmpret, res->owner);
+		if (dlm_is_host_down(tmpret))
 			ret = DLM_RECOVERING;
-			mlog(0, "node %u died so returning DLM_RECOVERING "
-			     "from lock message!\n", res->owner);
-		} else {
+		else
 			ret = dlm_err_to_dlm_status(tmpret);
-		}
 	}
 
 	return ret;
@@ -440,7 +438,7 @@
 		/* zero memory only if kernel-allocated */
 		lksb = kzalloc(sizeof(*lksb), GFP_NOFS);
 		if (!lksb) {
-			kfree(lock);
+			kmem_cache_free(dlm_lock_cache, lock);
 			return NULL;
 		}
 		kernel_allocated = 1;
@@ -718,18 +716,10 @@
 
 		if (status == DLM_RECOVERING || status == DLM_MIGRATING ||
 		    status == DLM_FORWARD) {
-			mlog(0, "retrying lock with migration/"
-			     "recovery/in progress\n");
 			msleep(100);
-			/* no waiting for dlm_reco_thread */
 			if (recovery) {
 				if (status != DLM_RECOVERING)
 					goto retry_lock;
-
-				mlog(0, "%s: got RECOVERING "
-				     "for $RECOVERY lock, master "
-				     "was %u\n", dlm->name,
-				     res->owner);
 				/* wait to see the node go down, then
 				 * drop down and allow the lockres to
 				 * get cleaned up.  need to remaster. */
@@ -741,6 +731,14 @@
 			}
 		}
 
+		/* Inflight taken in dlm_get_lock_resource() is dropped here */
+		spin_lock(&res->spinlock);
+		dlm_lockres_drop_inflight_ref(dlm, res);
+		spin_unlock(&res->spinlock);
+
+		dlm_lockres_calc_usage(dlm, res);
+		dlm_kick_thread(dlm, res);
+
 		if (status != DLM_NORMAL) {
 			lock->lksb->flags &= ~DLM_LKSB_GET_LVB;
 			if (status != DLM_NOTQUEUED)
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 11eefb8..005261c 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -631,39 +631,54 @@
 	return NULL;
 }
 
-void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
-				   struct dlm_lock_resource *res,
-				   int new_lockres,
-				   const char *file,
-				   int line)
+void dlm_lockres_set_refmap_bit(struct dlm_ctxt *dlm,
+				struct dlm_lock_resource *res, int bit)
 {
-	if (!new_lockres)
-		assert_spin_locked(&res->spinlock);
+	assert_spin_locked(&res->spinlock);
 
-	if (!test_bit(dlm->node_num, res->refmap)) {
-		BUG_ON(res->inflight_locks != 0);
-		dlm_lockres_set_refmap_bit(dlm->node_num, res);
-	}
-	res->inflight_locks++;
-	mlog(0, "%s:%.*s: inflight++: now %u\n",
-	     dlm->name, res->lockname.len, res->lockname.name,
-	     res->inflight_locks);
+	mlog(0, "res %.*s, set node %u, %ps()\n", res->lockname.len,
+	     res->lockname.name, bit, __builtin_return_address(0));
+
+	set_bit(bit, res->refmap);
 }
 
-void __dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
-				   struct dlm_lock_resource *res,
-				   const char *file,
-				   int line)
+void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm,
+				  struct dlm_lock_resource *res, int bit)
+{
+	assert_spin_locked(&res->spinlock);
+
+	mlog(0, "res %.*s, clr node %u, %ps()\n", res->lockname.len,
+	     res->lockname.name, bit, __builtin_return_address(0));
+
+	clear_bit(bit, res->refmap);
+}
+
+
+void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+				   struct dlm_lock_resource *res)
+{
+	assert_spin_locked(&res->spinlock);
+
+	res->inflight_locks++;
+
+	mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name,
+	     res->lockname.len, res->lockname.name, res->inflight_locks,
+	     __builtin_return_address(0));
+}
+
+void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
+				   struct dlm_lock_resource *res)
 {
 	assert_spin_locked(&res->spinlock);
 
 	BUG_ON(res->inflight_locks == 0);
+
 	res->inflight_locks--;
-	mlog(0, "%s:%.*s: inflight--: now %u\n",
-	     dlm->name, res->lockname.len, res->lockname.name,
-	     res->inflight_locks);
-	if (res->inflight_locks == 0)
-		dlm_lockres_clear_refmap_bit(dlm->node_num, res);
+
+	mlog(0, "%s: res %.*s, inflight--: now %u, %ps()\n", dlm->name,
+	     res->lockname.len, res->lockname.name, res->inflight_locks,
+	     __builtin_return_address(0));
+
 	wake_up(&res->wq);
 }
 
@@ -697,7 +712,6 @@
 	unsigned int hash;
 	int tries = 0;
 	int bit, wait_on_recovery = 0;
-	int drop_inflight_if_nonlocal = 0;
 
 	BUG_ON(!lockid);
 
@@ -709,36 +723,33 @@
 	spin_lock(&dlm->spinlock);
 	tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash);
 	if (tmpres) {
-		int dropping_ref = 0;
-
 		spin_unlock(&dlm->spinlock);
-
 		spin_lock(&tmpres->spinlock);
-		/* We wait for the other thread that is mastering the resource */
+		/* Wait on the thread that is mastering the resource */
 		if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
 			__dlm_wait_on_lockres(tmpres);
 			BUG_ON(tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN);
-		}
-
-		if (tmpres->owner == dlm->node_num) {
-			BUG_ON(tmpres->state & DLM_LOCK_RES_DROPPING_REF);
-			dlm_lockres_grab_inflight_ref(dlm, tmpres);
-		} else if (tmpres->state & DLM_LOCK_RES_DROPPING_REF)
-			dropping_ref = 1;
-		spin_unlock(&tmpres->spinlock);
-
-		/* wait until done messaging the master, drop our ref to allow
-		 * the lockres to be purged, start over. */
-		if (dropping_ref) {
-			spin_lock(&tmpres->spinlock);
-			__dlm_wait_on_lockres_flags(tmpres, DLM_LOCK_RES_DROPPING_REF);
 			spin_unlock(&tmpres->spinlock);
 			dlm_lockres_put(tmpres);
 			tmpres = NULL;
 			goto lookup;
 		}
 
-		mlog(0, "found in hash!\n");
+		/* Wait on the resource purge to complete before continuing */
+		if (tmpres->state & DLM_LOCK_RES_DROPPING_REF) {
+			BUG_ON(tmpres->owner == dlm->node_num);
+			__dlm_wait_on_lockres_flags(tmpres,
+						    DLM_LOCK_RES_DROPPING_REF);
+			spin_unlock(&tmpres->spinlock);
+			dlm_lockres_put(tmpres);
+			tmpres = NULL;
+			goto lookup;
+		}
+
+		/* Grab inflight ref to pin the resource */
+		dlm_lockres_grab_inflight_ref(dlm, tmpres);
+
+		spin_unlock(&tmpres->spinlock);
 		if (res)
 			dlm_lockres_put(res);
 		res = tmpres;
@@ -829,8 +840,8 @@
 		 * but they might own this lockres.  wait on them. */
 		bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
 		if (bit < O2NM_MAX_NODES) {
-			mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to "
-			     "recover before lock mastery can begin\n",
+			mlog(0, "%s: res %.*s, At least one node (%d) "
+			     "to recover before lock mastery can begin\n",
 			     dlm->name, namelen, (char *)lockid, bit);
 			wait_on_recovery = 1;
 		}
@@ -843,12 +854,11 @@
 
 	/* finally add the lockres to its hash bucket */
 	__dlm_insert_lockres(dlm, res);
-	/* since this lockres is new it doesn't not require the spinlock */
-	dlm_lockres_grab_inflight_ref_new(dlm, res);
 
-	/* if this node does not become the master make sure to drop
-	 * this inflight reference below */
-	drop_inflight_if_nonlocal = 1;
+	/* Grab inflight ref to pin the resource */
+	spin_lock(&res->spinlock);
+	dlm_lockres_grab_inflight_ref(dlm, res);
+	spin_unlock(&res->spinlock);
 
 	/* get an extra ref on the mle in case this is a BLOCK
 	 * if so, the creator of the BLOCK may try to put the last
@@ -864,8 +874,8 @@
 		 * dlm spinlock would be detectable be a change on the mle,
 		 * so we only need to clear out the recovery map once. */
 		if (dlm_is_recovery_lock(lockid, namelen)) {
-			mlog(ML_NOTICE, "%s: recovery map is not empty, but "
-			     "must master $RECOVERY lock now\n", dlm->name);
+			mlog(0, "%s: Recovery map is not empty, but must "
+			     "master $RECOVERY lock now\n", dlm->name);
 			if (!dlm_pre_master_reco_lockres(dlm, res))
 				wait_on_recovery = 0;
 			else {
@@ -883,8 +893,8 @@
 		spin_lock(&dlm->spinlock);
 		bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
 		if (bit < O2NM_MAX_NODES) {
-			mlog(ML_NOTICE, "%s:%.*s: at least one node (%d) to "
-			     "recover before lock mastery can begin\n",
+			mlog(0, "%s: res %.*s, At least one node (%d) "
+			     "to recover before lock mastery can begin\n",
 			     dlm->name, namelen, (char *)lockid, bit);
 			wait_on_recovery = 1;
 		} else
@@ -913,8 +923,8 @@
 			 * yet, keep going until it does.  this is how the
 			 * master will know that asserts are needed back to
 			 * the lower nodes. */
-			mlog(0, "%s:%.*s: requests only up to %u but master "
-			     "is %u, keep going\n", dlm->name, namelen,
+			mlog(0, "%s: res %.*s, Requests only up to %u but "
+			     "master is %u, keep going\n", dlm->name, namelen,
 			     lockid, nodenum, mle->master);
 		}
 	}
@@ -924,13 +934,12 @@
 	ret = dlm_wait_for_lock_mastery(dlm, res, mle, &blocked);
 	if (ret < 0) {
 		wait_on_recovery = 1;
-		mlog(0, "%s:%.*s: node map changed, redo the "
-		     "master request now, blocked=%d\n",
-		     dlm->name, res->lockname.len,
+		mlog(0, "%s: res %.*s, Node map changed, redo the master "
+		     "request now, blocked=%d\n", dlm->name, res->lockname.len,
 		     res->lockname.name, blocked);
 		if (++tries > 20) {
-			mlog(ML_ERROR, "%s:%.*s: spinning on "
-			     "dlm_wait_for_lock_mastery, blocked=%d\n",
+			mlog(ML_ERROR, "%s: res %.*s, Spinning on "
+			     "dlm_wait_for_lock_mastery, blocked = %d\n",
 			     dlm->name, res->lockname.len,
 			     res->lockname.name, blocked);
 			dlm_print_one_lock_resource(res);
@@ -940,7 +949,8 @@
 		goto redo_request;
 	}
 
-	mlog(0, "lockres mastered by %u\n", res->owner);
+	mlog(0, "%s: res %.*s, Mastered by %u\n", dlm->name, res->lockname.len,
+	     res->lockname.name, res->owner);
 	/* make sure we never continue without this */
 	BUG_ON(res->owner == O2NM_MAX_NODES);
 
@@ -952,8 +962,6 @@
 
 wake_waiters:
 	spin_lock(&res->spinlock);
-	if (res->owner != dlm->node_num && drop_inflight_if_nonlocal)
-		dlm_lockres_drop_inflight_ref(dlm, res);
 	res->state &= ~DLM_LOCK_RES_IN_PROGRESS;
 	spin_unlock(&res->spinlock);
 	wake_up(&res->wq);
@@ -1426,9 +1434,7 @@
 		}
 
 		if (res->owner == dlm->node_num) {
-			mlog(0, "%s:%.*s: setting bit %u in refmap\n",
-			     dlm->name, namelen, name, request->node_idx);
-			dlm_lockres_set_refmap_bit(request->node_idx, res);
+			dlm_lockres_set_refmap_bit(dlm, res, request->node_idx);
 			spin_unlock(&res->spinlock);
 			response = DLM_MASTER_RESP_YES;
 			if (mle)
@@ -1493,10 +1499,8 @@
 				 * go back and clean the mles on any
 				 * other nodes */
 				dispatch_assert = 1;
-				dlm_lockres_set_refmap_bit(request->node_idx, res);
-				mlog(0, "%s:%.*s: setting bit %u in refmap\n",
-				     dlm->name, namelen, name,
-				     request->node_idx);
+				dlm_lockres_set_refmap_bit(dlm, res,
+							   request->node_idx);
 			} else
 				response = DLM_MASTER_RESP_NO;
 		} else {
@@ -1702,7 +1706,7 @@
 			     "lockres, set the bit in the refmap\n",
 			     namelen, lockname, to);
 			spin_lock(&res->spinlock);
-			dlm_lockres_set_refmap_bit(to, res);
+			dlm_lockres_set_refmap_bit(dlm, res, to);
 			spin_unlock(&res->spinlock);
 		}
 	}
@@ -2187,8 +2191,6 @@
 	namelen = res->lockname.len;
 	BUG_ON(namelen > O2NM_MAX_NAME_LEN);
 
-	mlog(0, "%s:%.*s: sending deref to %d\n",
-	     dlm->name, namelen, lockname, res->owner);
 	memset(&deref, 0, sizeof(deref));
 	deref.node_idx = dlm->node_num;
 	deref.namelen = namelen;
@@ -2197,14 +2199,12 @@
 	ret = o2net_send_message(DLM_DEREF_LOCKRES_MSG, dlm->key,
 				 &deref, sizeof(deref), res->owner, &r);
 	if (ret < 0)
-		mlog(ML_ERROR, "Error %d when sending message %u (key 0x%x) to "
-		     "node %u\n", ret, DLM_DEREF_LOCKRES_MSG, dlm->key,
-		     res->owner);
+		mlog(ML_ERROR, "%s: res %.*s, error %d send DEREF to node %u\n",
+		     dlm->name, namelen, lockname, ret, res->owner);
 	else if (r < 0) {
 		/* BAD.  other node says I did not have a ref. */
-		mlog(ML_ERROR,"while dropping ref on %s:%.*s "
-		    "(master=%u) got %d.\n", dlm->name, namelen,
-		    lockname, res->owner, r);
+		mlog(ML_ERROR, "%s: res %.*s, DEREF to node %u got %d\n",
+		     dlm->name, namelen, lockname, res->owner, r);
 		dlm_print_one_lock_resource(res);
 		BUG();
 	}
@@ -2260,7 +2260,7 @@
 	else {
 		BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF);
 		if (test_bit(node, res->refmap)) {
-			dlm_lockres_clear_refmap_bit(node, res);
+			dlm_lockres_clear_refmap_bit(dlm, res, node);
 			cleared = 1;
 		}
 	}
@@ -2320,7 +2320,7 @@
 	BUG_ON(res->state & DLM_LOCK_RES_DROPPING_REF);
 	if (test_bit(node, res->refmap)) {
 		__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
-		dlm_lockres_clear_refmap_bit(node, res);
+		dlm_lockres_clear_refmap_bit(dlm, res, node);
 		cleared = 1;
 	}
 	spin_unlock(&res->spinlock);
@@ -2802,7 +2802,8 @@
 				BUG_ON(!list_empty(&lock->bast_list));
 				BUG_ON(lock->ast_pending);
 				BUG_ON(lock->bast_pending);
-				dlm_lockres_clear_refmap_bit(lock->ml.node, res);
+				dlm_lockres_clear_refmap_bit(dlm, res,
+							     lock->ml.node);
 				list_del_init(&lock->list);
 				dlm_lock_put(lock);
 				/* In a normal unlock, we would have added a
@@ -2823,7 +2824,7 @@
 			mlog(0, "%s:%.*s: node %u had a ref to this "
 			     "migrating lockres, clearing\n", dlm->name,
 			     res->lockname.len, res->lockname.name, bit);
-			dlm_lockres_clear_refmap_bit(bit, res);
+			dlm_lockres_clear_refmap_bit(dlm, res, bit);
 		}
 		bit++;
 	}
@@ -2916,9 +2917,9 @@
 					 &migrate, sizeof(migrate), nodenum,
 					 &status);
 		if (ret < 0) {
-			mlog(ML_ERROR, "Error %d when sending message %u (key "
-			     "0x%x) to node %u\n", ret, DLM_MIGRATE_REQUEST_MSG,
-			     dlm->key, nodenum);
+			mlog(ML_ERROR, "%s: res %.*s, Error %d send "
+			     "MIGRATE_REQUEST to node %u\n", dlm->name,
+			     migrate.namelen, migrate.name, ret, nodenum);
 			if (!dlm_is_host_down(ret)) {
 				mlog(ML_ERROR, "unhandled error=%d!\n", ret);
 				BUG();
@@ -2937,7 +2938,7 @@
 			     dlm->name, res->lockname.len, res->lockname.name,
 			     nodenum);
 			spin_lock(&res->spinlock);
-			dlm_lockres_set_refmap_bit(nodenum, res);
+			dlm_lockres_set_refmap_bit(dlm, res, nodenum);
 			spin_unlock(&res->spinlock);
 		}
 	}
@@ -3271,7 +3272,7 @@
 	 * mastery reference here since old_master will briefly have
 	 * a reference after the migration completes */
 	spin_lock(&res->spinlock);
-	dlm_lockres_set_refmap_bit(old_master, res);
+	dlm_lockres_set_refmap_bit(dlm, res, old_master);
 	spin_unlock(&res->spinlock);
 
 	mlog(0, "now time to do a migrate request to other nodes\n");
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index 7efab6d..01ebfd0 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -362,40 +362,38 @@
 }
 
 
-int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout)
+void dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout)
 {
-	if (timeout) {
-		mlog(ML_NOTICE, "%s: waiting %dms for notification of "
-		     "death of node %u\n", dlm->name, timeout, node);
+	if (dlm_is_node_dead(dlm, node))
+		return;
+
+	printk(KERN_NOTICE "o2dlm: Waiting on the death of node %u in "
+	       "domain %s\n", node, dlm->name);
+
+	if (timeout)
 		wait_event_timeout(dlm->dlm_reco_thread_wq,
-			   dlm_is_node_dead(dlm, node),
-			   msecs_to_jiffies(timeout));
-	} else {
-		mlog(ML_NOTICE, "%s: waiting indefinitely for notification "
-		     "of death of node %u\n", dlm->name, node);
+				   dlm_is_node_dead(dlm, node),
+				   msecs_to_jiffies(timeout));
+	else
 		wait_event(dlm->dlm_reco_thread_wq,
 			   dlm_is_node_dead(dlm, node));
-	}
-	/* for now, return 0 */
-	return 0;
 }
 
-int dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout)
+void dlm_wait_for_node_recovery(struct dlm_ctxt *dlm, u8 node, int timeout)
 {
-	if (timeout) {
-		mlog(0, "%s: waiting %dms for notification of "
-		     "recovery of node %u\n", dlm->name, timeout, node);
+	if (dlm_is_node_recovered(dlm, node))
+		return;
+
+	printk(KERN_NOTICE "o2dlm: Waiting on the recovery of node %u in "
+	       "domain %s\n", node, dlm->name);
+
+	if (timeout)
 		wait_event_timeout(dlm->dlm_reco_thread_wq,
-			   dlm_is_node_recovered(dlm, node),
-			   msecs_to_jiffies(timeout));
-	} else {
-		mlog(0, "%s: waiting indefinitely for notification "
-		     "of recovery of node %u\n", dlm->name, node);
+				   dlm_is_node_recovered(dlm, node),
+				   msecs_to_jiffies(timeout));
+	else
 		wait_event(dlm->dlm_reco_thread_wq,
 			   dlm_is_node_recovered(dlm, node));
-	}
-	/* for now, return 0 */
-	return 0;
 }
 
 /* callers of the top-level api calls (dlmlock/dlmunlock) should
@@ -430,6 +428,8 @@
 {
 	spin_lock(&dlm->spinlock);
 	BUG_ON(dlm->reco.state & DLM_RECO_STATE_ACTIVE);
+	printk(KERN_NOTICE "o2dlm: Begin recovery on domain %s for node %u\n",
+	       dlm->name, dlm->reco.dead_node);
 	dlm->reco.state |= DLM_RECO_STATE_ACTIVE;
 	spin_unlock(&dlm->spinlock);
 }
@@ -440,9 +440,18 @@
 	BUG_ON(!(dlm->reco.state & DLM_RECO_STATE_ACTIVE));
 	dlm->reco.state &= ~DLM_RECO_STATE_ACTIVE;
 	spin_unlock(&dlm->spinlock);
+	printk(KERN_NOTICE "o2dlm: End recovery on domain %s\n", dlm->name);
 	wake_up(&dlm->reco.event);
 }
 
+static void dlm_print_recovery_master(struct dlm_ctxt *dlm)
+{
+	printk(KERN_NOTICE "o2dlm: Node %u (%s) is the Recovery Master for the "
+	       "dead node %u in domain %s\n", dlm->reco.new_master,
+	       (dlm->node_num == dlm->reco.new_master ? "me" : "he"),
+	       dlm->reco.dead_node, dlm->name);
+}
+
 static int dlm_do_recovery(struct dlm_ctxt *dlm)
 {
 	int status = 0;
@@ -505,9 +514,8 @@
 		}
 		mlog(0, "another node will master this recovery session.\n");
 	}
-	mlog(0, "dlm=%s (%d), new_master=%u, this node=%u, dead_node=%u\n",
-	     dlm->name, task_pid_nr(dlm->dlm_reco_thread_task), dlm->reco.new_master,
-	     dlm->node_num, dlm->reco.dead_node);
+
+	dlm_print_recovery_master(dlm);
 
 	/* it is safe to start everything back up here
 	 * because all of the dead node's lock resources
@@ -518,15 +526,13 @@
 	return 0;
 
 master_here:
-	mlog(ML_NOTICE, "(%d) Node %u is the Recovery Master for the Dead Node "
-	     "%u for Domain %s\n", task_pid_nr(dlm->dlm_reco_thread_task),
-	     dlm->node_num, dlm->reco.dead_node, dlm->name);
+	dlm_print_recovery_master(dlm);
 
 	status = dlm_remaster_locks(dlm, dlm->reco.dead_node);
 	if (status < 0) {
 		/* we should never hit this anymore */
-		mlog(ML_ERROR, "error %d remastering locks for node %u, "
-		     "retrying.\n", status, dlm->reco.dead_node);
+		mlog(ML_ERROR, "%s: Error %d remastering locks for node %u, "
+		     "retrying.\n", dlm->name, status, dlm->reco.dead_node);
 		/* yield a bit to allow any final network messages
 		 * to get handled on remaining nodes */
 		msleep(100);
@@ -567,7 +573,7 @@
 		BUG_ON(ndata->state != DLM_RECO_NODE_DATA_INIT);
 		ndata->state = DLM_RECO_NODE_DATA_REQUESTING;
 
-		mlog(0, "requesting lock info from node %u\n",
+		mlog(0, "%s: Requesting lock info from node %u\n", dlm->name,
 		     ndata->node_num);
 
 		if (ndata->node_num == dlm->node_num) {
@@ -640,7 +646,7 @@
 		spin_unlock(&dlm_reco_state_lock);
 	}
 
-	mlog(0, "done requesting all lock info\n");
+	mlog(0, "%s: Done requesting all lock info\n", dlm->name);
 
 	/* nodes should be sending reco data now
 	 * just need to wait */
@@ -802,10 +808,9 @@
 
 	/* negative status is handled by caller */
 	if (ret < 0)
-		mlog(ML_ERROR, "Error %d when sending message %u (key "
-		     "0x%x) to node %u\n", ret, DLM_LOCK_REQUEST_MSG,
-		     dlm->key, request_from);
-
+		mlog(ML_ERROR, "%s: Error %d send LOCK_REQUEST to node %u "
+		     "to recover dead node %u\n", dlm->name, ret,
+		     request_from, dead_node);
 	// return from here, then
 	// sleep until all received or error
 	return ret;
@@ -956,9 +961,9 @@
 	ret = o2net_send_message(DLM_RECO_DATA_DONE_MSG, dlm->key, &done_msg,
 				 sizeof(done_msg), send_to, &tmpret);
 	if (ret < 0) {
-		mlog(ML_ERROR, "Error %d when sending message %u (key "
-		     "0x%x) to node %u\n", ret, DLM_RECO_DATA_DONE_MSG,
-		     dlm->key, send_to);
+		mlog(ML_ERROR, "%s: Error %d send RECO_DATA_DONE to node %u "
+		     "to recover dead node %u\n", dlm->name, ret, send_to,
+		     dead_node);
 		if (!dlm_is_host_down(ret)) {
 			BUG();
 		}
@@ -1127,9 +1132,11 @@
 	if (ret < 0) {
 		/* XXX: negative status is not handled.
 		 * this will end up killing this node. */
-		mlog(ML_ERROR, "Error %d when sending message %u (key "
-		     "0x%x) to node %u\n", ret, DLM_MIG_LOCKRES_MSG,
-		     dlm->key, send_to);
+		mlog(ML_ERROR, "%s: res %.*s, Error %d send MIG_LOCKRES to "
+		     "node %u (%s)\n", dlm->name, mres->lockname_len,
+		     mres->lockname, ret, send_to,
+		     (orig_flags & DLM_MRES_MIGRATION ?
+		      "migration" : "recovery"));
 	} else {
 		/* might get an -ENOMEM back here */
 		ret = status;
@@ -1767,7 +1774,7 @@
 			     dlm->name, mres->lockname_len, mres->lockname,
 			     from);
 			spin_lock(&res->spinlock);
-			dlm_lockres_set_refmap_bit(from, res);
+			dlm_lockres_set_refmap_bit(dlm, res, from);
 			spin_unlock(&res->spinlock);
 			added++;
 			break;
@@ -1965,7 +1972,7 @@
 			mlog(0, "%s:%.*s: added lock for node %u, "
 			     "setting refmap bit\n", dlm->name,
 			     res->lockname.len, res->lockname.name, ml->node);
-			dlm_lockres_set_refmap_bit(ml->node, res);
+			dlm_lockres_set_refmap_bit(dlm, res, ml->node);
 			added++;
 		}
 		spin_unlock(&res->spinlock);
@@ -2084,6 +2091,9 @@
 
 	list_for_each_entry_safe(res, next, &dlm->reco.resources, recovering) {
 		if (res->owner == dead_node) {
+			mlog(0, "%s: res %.*s, Changing owner from %u to %u\n",
+			     dlm->name, res->lockname.len, res->lockname.name,
+			     res->owner, new_master);
 			list_del_init(&res->recovering);
 			spin_lock(&res->spinlock);
 			/* new_master has our reference from
@@ -2105,40 +2115,30 @@
 	for (i = 0; i < DLM_HASH_BUCKETS; i++) {
 		bucket = dlm_lockres_hash(dlm, i);
 		hlist_for_each_entry(res, hash_iter, bucket, hash_node) {
-			if (res->state & DLM_LOCK_RES_RECOVERING) {
-				if (res->owner == dead_node) {
-					mlog(0, "(this=%u) res %.*s owner=%u "
-					     "was not on recovering list, but "
-					     "clearing state anyway\n",
-					     dlm->node_num, res->lockname.len,
-					     res->lockname.name, new_master);
-				} else if (res->owner == dlm->node_num) {
-					mlog(0, "(this=%u) res %.*s owner=%u "
-					     "was not on recovering list, "
-					     "owner is THIS node, clearing\n",
-					     dlm->node_num, res->lockname.len,
-					     res->lockname.name, new_master);
-				} else
-					continue;
+			if (!(res->state & DLM_LOCK_RES_RECOVERING))
+				continue;
 
-				if (!list_empty(&res->recovering)) {
-					mlog(0, "%s:%.*s: lockres was "
-					     "marked RECOVERING, owner=%u\n",
-					     dlm->name, res->lockname.len,
-					     res->lockname.name, res->owner);
-					list_del_init(&res->recovering);
-					dlm_lockres_put(res);
-				}
-				spin_lock(&res->spinlock);
-				/* new_master has our reference from
-				 * the lock state sent during recovery */
-				dlm_change_lockres_owner(dlm, res, new_master);
-				res->state &= ~DLM_LOCK_RES_RECOVERING;
-				if (__dlm_lockres_has_locks(res))
-					__dlm_dirty_lockres(dlm, res);
-				spin_unlock(&res->spinlock);
-				wake_up(&res->wq);
+			if (res->owner != dead_node &&
+			    res->owner != dlm->node_num)
+				continue;
+
+			if (!list_empty(&res->recovering)) {
+				list_del_init(&res->recovering);
+				dlm_lockres_put(res);
 			}
+
+			/* new_master has our reference from
+			 * the lock state sent during recovery */
+			mlog(0, "%s: res %.*s, Changing owner from %u to %u\n",
+			     dlm->name, res->lockname.len, res->lockname.name,
+			     res->owner, new_master);
+			spin_lock(&res->spinlock);
+			dlm_change_lockres_owner(dlm, res, new_master);
+			res->state &= ~DLM_LOCK_RES_RECOVERING;
+			if (__dlm_lockres_has_locks(res))
+				__dlm_dirty_lockres(dlm, res);
+			spin_unlock(&res->spinlock);
+			wake_up(&res->wq);
 		}
 	}
 }
@@ -2252,12 +2252,12 @@
 			     res->lockname.len, res->lockname.name, freed, dead_node);
 			__dlm_print_one_lock_resource(res);
 		}
-		dlm_lockres_clear_refmap_bit(dead_node, res);
+		dlm_lockres_clear_refmap_bit(dlm, res, dead_node);
 	} else if (test_bit(dead_node, res->refmap)) {
 		mlog(0, "%s:%.*s: dead node %u had a ref, but had "
 		     "no locks and had not purged before dying\n", dlm->name,
 		     res->lockname.len, res->lockname.name, dead_node);
-		dlm_lockres_clear_refmap_bit(dead_node, res);
+		dlm_lockres_clear_refmap_bit(dlm, res, dead_node);
 	}
 
 	/* do not kick thread yet */
@@ -2324,9 +2324,9 @@
 			dlm_revalidate_lvb(dlm, res, dead_node);
 			if (res->owner == dead_node) {
 				if (res->state & DLM_LOCK_RES_DROPPING_REF) {
-					mlog(ML_NOTICE, "Ignore %.*s for "
+					mlog(ML_NOTICE, "%s: res %.*s, Skip "
 					     "recovery as it is being freed\n",
-					     res->lockname.len,
+					     dlm->name, res->lockname.len,
 					     res->lockname.name);
 				} else
 					dlm_move_lockres_to_recovery_list(dlm,
diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c
index 1d6d1d2..e73c833 100644
--- a/fs/ocfs2/dlm/dlmthread.c
+++ b/fs/ocfs2/dlm/dlmthread.c
@@ -94,24 +94,26 @@
 {
 	int bit;
 
+	assert_spin_locked(&res->spinlock);
+
 	if (__dlm_lockres_has_locks(res))
 		return 0;
 
+	/* Locks are in the process of being created */
+	if (res->inflight_locks)
+		return 0;
+
 	if (!list_empty(&res->dirty) || res->state & DLM_LOCK_RES_DIRTY)
 		return 0;
 
 	if (res->state & DLM_LOCK_RES_RECOVERING)
 		return 0;
 
+	/* Another node has this resource with this node as the master */
 	bit = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
 	if (bit < O2NM_MAX_NODES)
 		return 0;
 
-	/*
-	 * since the bit for dlm->node_num is not set, inflight_locks better
-	 * be zero
-	 */
-	BUG_ON(res->inflight_locks != 0);
 	return 1;
 }
 
@@ -185,8 +187,6 @@
 		/* clear our bit from the master's refmap, ignore errors */
 		ret = dlm_drop_lockres_ref(dlm, res);
 		if (ret < 0) {
-			mlog(ML_ERROR, "%s: deref %.*s failed %d\n", dlm->name,
-			     res->lockname.len, res->lockname.name, ret);
 			if (!dlm_is_host_down(ret))
 				BUG();
 		}
@@ -209,7 +209,7 @@
 		BUG();
 	}
 
-	__dlm_unhash_lockres(res);
+	__dlm_unhash_lockres(dlm, res);
 
 	/* lockres is not in the hash now.  drop the flag and wake up
 	 * any processes waiting in dlm_get_lock_resource. */
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index e1ed5e5..81a4cd2 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1692,7 +1692,7 @@
 	mlog(0, "inode %llu take PRMODE open lock\n",
 	     (unsigned long long)OCFS2_I(inode)->ip_blkno);
 
-	if (ocfs2_mount_local(osb))
+	if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb))
 		goto out;
 
 	lockres = &OCFS2_I(inode)->ip_open_lockres;
@@ -1718,6 +1718,12 @@
 	     (unsigned long long)OCFS2_I(inode)->ip_blkno,
 	     write ? "EXMODE" : "PRMODE");
 
+	if (ocfs2_is_hard_readonly(osb)) {
+		if (write)
+			status = -EROFS;
+		goto out;
+	}
+
 	if (ocfs2_mount_local(osb))
 		goto out;
 
@@ -2298,7 +2304,7 @@
 	if (ocfs2_is_hard_readonly(osb)) {
 		if (ex)
 			status = -EROFS;
-		goto bail;
+		goto getbh;
 	}
 
 	if (ocfs2_mount_local(osb))
@@ -2356,7 +2362,7 @@
 			mlog_errno(status);
 		goto bail;
 	}
-
+getbh:
 	if (ret_bh) {
 		status = ocfs2_assign_bh(inode, ret_bh, local_bh);
 		if (status < 0) {
@@ -2628,8 +2634,11 @@
 
 	BUG_ON(!dl);
 
-	if (ocfs2_is_hard_readonly(osb))
-		return -EROFS;
+	if (ocfs2_is_hard_readonly(osb)) {
+		if (ex)
+			return -EROFS;
+		return 0;
+	}
 
 	if (ocfs2_mount_local(osb))
 		return 0;
@@ -2647,7 +2656,7 @@
 	struct ocfs2_dentry_lock *dl = dentry->d_fsdata;
 	struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb);
 
-	if (!ocfs2_mount_local(osb))
+	if (!ocfs2_is_hard_readonly(osb) && !ocfs2_mount_local(osb))
 		ocfs2_cluster_unlock(osb, &dl->dl_lockres, level);
 }
 
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 23457b4..2f5b92e 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -832,6 +832,102 @@
 	return ret;
 }
 
+int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin)
+{
+	struct inode *inode = file->f_mapping->host;
+	int ret;
+	unsigned int is_last = 0, is_data = 0;
+	u16 cs_bits = OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+	u32 cpos, cend, clen, hole_size;
+	u64 extoff, extlen;
+	struct buffer_head *di_bh = NULL;
+	struct ocfs2_extent_rec rec;
+
+	BUG_ON(origin != SEEK_DATA && origin != SEEK_HOLE);
+
+	ret = ocfs2_inode_lock(inode, &di_bh, 0);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	down_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	if (*offset >= inode->i_size) {
+		ret = -ENXIO;
+		goto out_unlock;
+	}
+
+	if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
+		if (origin == SEEK_HOLE)
+			*offset = inode->i_size;
+		goto out_unlock;
+	}
+
+	clen = 0;
+	cpos = *offset >> cs_bits;
+	cend = ocfs2_clusters_for_bytes(inode->i_sb, inode->i_size);
+
+	while (cpos < cend && !is_last) {
+		ret = ocfs2_get_clusters_nocache(inode, di_bh, cpos, &hole_size,
+						 &rec, &is_last);
+		if (ret) {
+			mlog_errno(ret);
+			goto out_unlock;
+		}
+
+		extoff = cpos;
+		extoff <<= cs_bits;
+
+		if (rec.e_blkno == 0ULL) {
+			clen = hole_size;
+			is_data = 0;
+		} else {
+			clen = le16_to_cpu(rec.e_leaf_clusters) -
+				(cpos - le32_to_cpu(rec.e_cpos));
+			is_data = (rec.e_flags & OCFS2_EXT_UNWRITTEN) ?  0 : 1;
+		}
+
+		if ((!is_data && origin == SEEK_HOLE) ||
+		    (is_data && origin == SEEK_DATA)) {
+			if (extoff > *offset)
+				*offset = extoff;
+			goto out_unlock;
+		}
+
+		if (!is_last)
+			cpos += clen;
+	}
+
+	if (origin == SEEK_HOLE) {
+		extoff = cpos;
+		extoff <<= cs_bits;
+		extlen = clen;
+		extlen <<=  cs_bits;
+
+		if ((extoff + extlen) > inode->i_size)
+			extlen = inode->i_size - extoff;
+		extoff += extlen;
+		if (extoff > *offset)
+			*offset = extoff;
+		goto out_unlock;
+	}
+
+	ret = -ENXIO;
+
+out_unlock:
+
+	brelse(di_bh);
+
+	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	ocfs2_inode_unlock(inode, 0);
+out:
+	if (ret && ret != -ENXIO)
+		ret = -ENXIO;
+	return ret;
+}
+
 int ocfs2_read_virt_blocks(struct inode *inode, u64 v_block, int nr,
 			   struct buffer_head *bhs[], int flags,
 			   int (*validate)(struct super_block *sb,
diff --git a/fs/ocfs2/extent_map.h b/fs/ocfs2/extent_map.h
index e79d41c..67ea57d 100644
--- a/fs/ocfs2/extent_map.h
+++ b/fs/ocfs2/extent_map.h
@@ -53,6 +53,8 @@
 int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		 u64 map_start, u64 map_len);
 
+int ocfs2_seek_data_hole_offset(struct file *file, loff_t *offset, int origin);
+
 int ocfs2_xattr_get_clusters(struct inode *inode, u32 v_cluster,
 			     u32 *p_cluster, u32 *num_clusters,
 			     struct ocfs2_extent_list *el,
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index de4ea1a..6e39668 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1950,6 +1950,9 @@
 	if (ret < 0)
 		mlog_errno(ret);
 
+	if (file->f_flags & O_SYNC)
+		handle->h_sync = 1;
+
 	ocfs2_commit_trans(osb, handle);
 
 out_inode_unlock:
@@ -2052,6 +2055,23 @@
 	return ret;
 }
 
+static void ocfs2_aiodio_wait(struct inode *inode)
+{
+	wait_queue_head_t *wq = ocfs2_ioend_wq(inode);
+
+	wait_event(*wq, (atomic_read(&OCFS2_I(inode)->ip_unaligned_aio) == 0));
+}
+
+static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos)
+{
+	int blockmask = inode->i_sb->s_blocksize - 1;
+	loff_t final_size = pos + count;
+
+	if ((pos & blockmask) || (final_size & blockmask))
+		return 1;
+	return 0;
+}
+
 static int ocfs2_prepare_inode_for_refcount(struct inode *inode,
 					    struct file *file,
 					    loff_t pos, size_t count,
@@ -2230,6 +2250,7 @@
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	int full_coherency = !(osb->s_mount_opt &
 			       OCFS2_MOUNT_COHERENCY_BUFFERED);
+	int unaligned_dio = 0;
 
 	trace_ocfs2_file_aio_write(inode, file, file->f_path.dentry,
 		(unsigned long long)OCFS2_I(inode)->ip_blkno,
@@ -2297,6 +2318,10 @@
 		goto out;
 	}
 
+	if (direct_io && !is_sync_kiocb(iocb))
+		unaligned_dio = ocfs2_is_io_unaligned(inode, iocb->ki_left,
+						      *ppos);
+
 	/*
 	 * We can't complete the direct I/O as requested, fall back to
 	 * buffered I/O.
@@ -2311,6 +2336,18 @@
 		goto relock;
 	}
 
+	if (unaligned_dio) {
+		/*
+		 * Wait on previous unaligned aio to complete before
+		 * proceeding.
+		 */
+		ocfs2_aiodio_wait(inode);
+
+		/* Mark the iocb as needing a decrement in ocfs2_dio_end_io */
+		atomic_inc(&OCFS2_I(inode)->ip_unaligned_aio);
+		ocfs2_iocb_set_unaligned_aio(iocb);
+	}
+
 	/*
 	 * To later detect whether a journal commit for sync writes is
 	 * necessary, we sample i_size, and cluster count here.
@@ -2382,8 +2419,12 @@
 	if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) {
 		rw_level = -1;
 		have_alloc_sem = 0;
+		unaligned_dio = 0;
 	}
 
+	if (unaligned_dio)
+		atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+
 out:
 	if (rw_level != -1)
 		ocfs2_rw_unlock(inode, rw_level);
@@ -2591,6 +2632,57 @@
 	return ret;
 }
 
+/* Refer generic_file_llseek_unlocked() */
+static loff_t ocfs2_file_llseek(struct file *file, loff_t offset, int origin)
+{
+	struct inode *inode = file->f_mapping->host;
+	int ret = 0;
+
+	mutex_lock(&inode->i_mutex);
+
+	switch (origin) {
+	case SEEK_SET:
+		break;
+	case SEEK_END:
+		offset += inode->i_size;
+		break;
+	case SEEK_CUR:
+		if (offset == 0) {
+			offset = file->f_pos;
+			goto out;
+		}
+		offset += file->f_pos;
+		break;
+	case SEEK_DATA:
+	case SEEK_HOLE:
+		ret = ocfs2_seek_data_hole_offset(file, &offset, origin);
+		if (ret)
+			goto out;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET))
+		ret = -EINVAL;
+	if (!ret && offset > inode->i_sb->s_maxbytes)
+		ret = -EINVAL;
+	if (ret)
+		goto out;
+
+	if (offset != file->f_pos) {
+		file->f_pos = offset;
+		file->f_version = 0;
+	}
+
+out:
+	mutex_unlock(&inode->i_mutex);
+	if (ret)
+		return ret;
+	return offset;
+}
+
 const struct inode_operations ocfs2_file_iops = {
 	.setattr	= ocfs2_setattr,
 	.getattr	= ocfs2_getattr,
@@ -2615,7 +2707,7 @@
  * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks!
  */
 const struct file_operations ocfs2_fops = {
-	.llseek		= generic_file_llseek,
+	.llseek		= ocfs2_file_llseek,
 	.read		= do_sync_read,
 	.write		= do_sync_write,
 	.mmap		= ocfs2_mmap,
@@ -2663,7 +2755,7 @@
  * the cluster.
  */
 const struct file_operations ocfs2_fops_no_plocks = {
-	.llseek		= generic_file_llseek,
+	.llseek		= ocfs2_file_llseek,
 	.read		= do_sync_read,
 	.write		= do_sync_write,
 	.mmap		= ocfs2_mmap,
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index a22d2c0..17454a9 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -951,7 +951,7 @@
 	trace_ocfs2_cleanup_delete_inode(
 		(unsigned long long)OCFS2_I(inode)->ip_blkno, sync_data);
 	if (sync_data)
-		write_inode_now(inode, 1);
+		filemap_write_and_wait(inode->i_mapping);
 	truncate_inode_pages(&inode->i_data, 0);
 }
 
diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h
index 1c508b1..88924a3 100644
--- a/fs/ocfs2/inode.h
+++ b/fs/ocfs2/inode.h
@@ -43,6 +43,9 @@
 	/* protects extended attribute changes on this inode */
 	struct rw_semaphore		ip_xattr_sem;
 
+	/* Number of outstanding AIO's which are not page aligned */
+	atomic_t			ip_unaligned_aio;
+
 	/* These fields are protected by ip_lock */
 	spinlock_t			ip_lock;
 	u32				ip_open_count;
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index bc91072..726ff26 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -122,7 +122,7 @@
 	if ((oldflags & OCFS2_IMMUTABLE_FL) || ((flags ^ oldflags) &
 		(OCFS2_APPEND_FL | OCFS2_IMMUTABLE_FL))) {
 		if (!capable(CAP_LINUX_IMMUTABLE))
-			goto bail_unlock;
+			goto bail_commit;
 	}
 
 	ocfs2_inode->ip_attr = flags;
@@ -132,6 +132,7 @@
 	if (status < 0)
 		mlog_errno(status);
 
+bail_commit:
 	ocfs2_commit_trans(osb, handle);
 bail_unlock:
 	ocfs2_inode_unlock(inode, 1);
@@ -381,7 +382,7 @@
 	if (!oifi) {
 		status = -ENOMEM;
 		mlog_errno(status);
-		goto bail;
+		goto out_err;
 	}
 
 	if (o2info_from_user(*oifi, req))
@@ -431,7 +432,7 @@
 		o2info_set_request_error(&oifi->ifi_req, req);
 
 	kfree(oifi);
-
+out_err:
 	return status;
 }
 
@@ -666,7 +667,7 @@
 	if (!oiff) {
 		status = -ENOMEM;
 		mlog_errno(status);
-		goto bail;
+		goto out_err;
 	}
 
 	if (o2info_from_user(*oiff, req))
@@ -716,7 +717,7 @@
 		o2info_set_request_error(&oiff->iff_req, req);
 
 	kfree(oiff);
-
+out_err:
 	return status;
 }
 
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 295d564..0a42ae9 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1544,9 +1544,9 @@
 	/* we need to run complete recovery for offline orphan slots */
 	ocfs2_replay_map_set_state(osb, REPLAY_NEEDED);
 
-	mlog(ML_NOTICE, "Recovering node %d from slot %d on device (%u,%u)\n",
-	     node_num, slot_num,
-	     MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
+	printk(KERN_NOTICE "ocfs2: Begin replay journal (node %d, slot %d) on "\
+	       "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev),
+	       MINOR(osb->sb->s_dev));
 
 	OCFS2_I(inode)->ip_clusters = le32_to_cpu(fe->i_clusters);
 
@@ -1601,6 +1601,9 @@
 
 	jbd2_journal_destroy(journal);
 
+	printk(KERN_NOTICE "ocfs2: End replay journal (node %d, slot %d) on "\
+	       "device (%u,%u)\n", node_num, slot_num, MAJOR(osb->sb->s_dev),
+	       MINOR(osb->sb->s_dev));
 done:
 	/* drop the lock on this nodes journal */
 	if (got_lock)
@@ -1808,6 +1811,20 @@
  * every slot, queuing a recovery of the slot on the ocfs2_wq thread. This
  * is done to catch any orphans that are left over in orphan directories.
  *
+ * It scans all slots, even ones that are in use. It does so to handle the
+ * case described below:
+ *
+ *   Node 1 has an inode it was using. The dentry went away due to memory
+ *   pressure.  Node 1 closes the inode, but it's on the free list. The node
+ *   has the open lock.
+ *   Node 2 unlinks the inode. It grabs the dentry lock to notify others,
+ *   but node 1 has no dentry and doesn't get the message. It trylocks the
+ *   open lock, sees that another node has a PR, and does nothing.
+ *   Later node 2 runs its orphan dir. It igets the inode, trylocks the
+ *   open lock, sees the PR still, and does nothing.
+ *   Basically, we have to trigger an orphan iput on node 1. The only way
+ *   for this to happen is if node 1 runs node 2's orphan dir.
+ *
  * ocfs2_queue_orphan_scan gets called every ORPHAN_SCAN_SCHEDULE_TIMEOUT
  * seconds.  It gets an EX lock on os_lockres and checks sequence number
  * stored in LVB. If the sequence number has changed, it means some other
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 68cf2f6..a3385b6 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -441,10 +441,11 @@
 #define OCFS2_SIMPLE_DIR_EXTEND_CREDITS (2)
 
 /* file update (nlink, etc) + directory mtime/ctime + dir entry block + quota
- * update on dir + index leaf + dx root update for free list */
+ * update on dir + index leaf + dx root update for free list +
+ * previous dirblock update in the free list */
 static inline int ocfs2_link_credits(struct super_block *sb)
 {
-	return 2*OCFS2_INODE_UPDATE_CREDITS + 3 +
+	return 2*OCFS2_INODE_UPDATE_CREDITS + 4 +
 	       ocfs2_quota_trans_credits(sb);
 }
 
diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c
index 3e9393c..9cd4108 100644
--- a/fs/ocfs2/mmap.c
+++ b/fs/ocfs2/mmap.c
@@ -61,7 +61,7 @@
 static int __ocfs2_page_mkwrite(struct file *file, struct buffer_head *di_bh,
 				struct page *page)
 {
-	int ret;
+	int ret = VM_FAULT_NOPAGE;
 	struct inode *inode = file->f_path.dentry->d_inode;
 	struct address_space *mapping = inode->i_mapping;
 	loff_t pos = page_offset(page);
@@ -71,32 +71,25 @@
 	void *fsdata;
 	loff_t size = i_size_read(inode);
 
-	/*
-	 * Another node might have truncated while we were waiting on
-	 * cluster locks.
-	 * We don't check size == 0 before the shift. This is borrowed
-	 * from do_generic_file_read.
-	 */
 	last_index = (size - 1) >> PAGE_CACHE_SHIFT;
-	if (unlikely(!size || page->index > last_index)) {
-		ret = -EINVAL;
-		goto out;
-	}
 
 	/*
-	 * The i_size check above doesn't catch the case where nodes
-	 * truncated and then re-extended the file. We'll re-check the
-	 * page mapping after taking the page lock inside of
-	 * ocfs2_write_begin_nolock().
+	 * There are cases that lead to the page no longer bebongs to the
+	 * mapping.
+	 * 1) pagecache truncates locally due to memory pressure.
+	 * 2) pagecache truncates when another is taking EX lock against 
+	 * inode lock. see ocfs2_data_convert_worker.
+	 * 
+	 * The i_size check doesn't catch the case where nodes truncated and
+	 * then re-extended the file. We'll re-check the page mapping after
+	 * taking the page lock inside of ocfs2_write_begin_nolock().
+	 *
+	 * Let VM retry with these cases.
 	 */
-	if (!PageUptodate(page) || page->mapping != inode->i_mapping) {
-		/*
-		 * the page has been umapped in ocfs2_data_downconvert_worker.
-		 * So return 0 here and let VFS retry.
-		 */
-		ret = 0;
+	if ((page->mapping != inode->i_mapping) ||
+	    (!PageUptodate(page)) ||
+	    (page_offset(page) >= size))
 		goto out;
-	}
 
 	/*
 	 * Call ocfs2_write_begin() and ocfs2_write_end() to take
@@ -116,17 +109,21 @@
 	if (ret) {
 		if (ret != -ENOSPC)
 			mlog_errno(ret);
+		if (ret == -ENOMEM)
+			ret = VM_FAULT_OOM;
+		else
+			ret = VM_FAULT_SIGBUS;
 		goto out;
 	}
 
-	ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page,
-				     fsdata);
-	if (ret < 0) {
-		mlog_errno(ret);
+	if (!locked_page) {
+		ret = VM_FAULT_NOPAGE;
 		goto out;
 	}
+	ret = ocfs2_write_end_nolock(mapping, pos, len, len, locked_page,
+				     fsdata);
 	BUG_ON(ret != len);
-	ret = 0;
+	ret = VM_FAULT_LOCKED;
 out:
 	return ret;
 }
@@ -168,8 +165,6 @@
 
 out:
 	ocfs2_unblock_signals(&oldset);
-	if (ret)
-		ret = VM_FAULT_SIGBUS;
 	return ret;
 }
 
diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c
index d53cb70..184c76b 100644
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -745,7 +745,7 @@
 	 */
 	ocfs2_probe_alloc_group(inode, gd_bh, &goal_bit, len, move_max_hop,
 				new_phys_cpos);
-	if (!new_phys_cpos) {
+	if (!*new_phys_cpos) {
 		ret = -ENOSPC;
 		goto out_commit;
 	}
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 4092858..d355e6e 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -836,18 +836,65 @@
 
 static inline void _ocfs2_set_bit(unsigned int bit, unsigned long *bitmap)
 {
-	__test_and_set_bit_le(bit, bitmap);
+	__set_bit_le(bit, bitmap);
 }
 #define ocfs2_set_bit(bit, addr) _ocfs2_set_bit((bit), (unsigned long *)(addr))
 
 static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap)
 {
-	__test_and_clear_bit_le(bit, bitmap);
+	__clear_bit_le(bit, bitmap);
 }
 #define ocfs2_clear_bit(bit, addr) _ocfs2_clear_bit((bit), (unsigned long *)(addr))
 
 #define ocfs2_test_bit test_bit_le
 #define ocfs2_find_next_zero_bit find_next_zero_bit_le
 #define ocfs2_find_next_bit find_next_bit_le
+
+static inline void *correct_addr_and_bit_unaligned(int *bit, void *addr)
+{
+#if BITS_PER_LONG == 64
+	*bit += ((unsigned long) addr & 7UL) << 3;
+	addr = (void *) ((unsigned long) addr & ~7UL);
+#elif BITS_PER_LONG == 32
+	*bit += ((unsigned long) addr & 3UL) << 3;
+	addr = (void *) ((unsigned long) addr & ~3UL);
+#else
+#error "how many bits you are?!"
+#endif
+	return addr;
+}
+
+static inline void ocfs2_set_bit_unaligned(int bit, void *bitmap)
+{
+	bitmap = correct_addr_and_bit_unaligned(&bit, bitmap);
+	ocfs2_set_bit(bit, bitmap);
+}
+
+static inline void ocfs2_clear_bit_unaligned(int bit, void *bitmap)
+{
+	bitmap = correct_addr_and_bit_unaligned(&bit, bitmap);
+	ocfs2_clear_bit(bit, bitmap);
+}
+
+static inline int ocfs2_test_bit_unaligned(int bit, void *bitmap)
+{
+	bitmap = correct_addr_and_bit_unaligned(&bit, bitmap);
+	return ocfs2_test_bit(bit, bitmap);
+}
+
+static inline int ocfs2_find_next_zero_bit_unaligned(void *bitmap, int max,
+							int start)
+{
+	int fix = 0, ret, tmpmax;
+	bitmap = correct_addr_and_bit_unaligned(&fix, bitmap);
+	tmpmax = max + fix;
+	start += fix;
+
+	ret = ocfs2_find_next_zero_bit(bitmap, tmpmax, start) - fix;
+	if (ret > max)
+		return max;
+	return ret;
+}
+
 #endif  /* OCFS2_H */
 
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index dc8007f..f100bf7 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -404,7 +404,9 @@
 	int status = 0;
 	struct ocfs2_quota_recovery *rec;
 
-	mlog(ML_NOTICE, "Beginning quota recovery in slot %u\n", slot_num);
+	printk(KERN_NOTICE "ocfs2: Beginning quota recovery on device (%s) for "
+	       "slot %u\n", osb->dev_str, slot_num);
+
 	rec = ocfs2_alloc_quota_recovery();
 	if (!rec)
 		return ERR_PTR(-ENOMEM);
@@ -549,8 +551,8 @@
 				goto out_commit;
 			}
 			lock_buffer(qbh);
-			WARN_ON(!ocfs2_test_bit(bit, dchunk->dqc_bitmap));
-			ocfs2_clear_bit(bit, dchunk->dqc_bitmap);
+			WARN_ON(!ocfs2_test_bit_unaligned(bit, dchunk->dqc_bitmap));
+			ocfs2_clear_bit_unaligned(bit, dchunk->dqc_bitmap);
 			le32_add_cpu(&dchunk->dqc_free, 1);
 			unlock_buffer(qbh);
 			ocfs2_journal_dirty(handle, qbh);
@@ -596,7 +598,9 @@
 	struct inode *lqinode;
 	unsigned int flags;
 
-	mlog(ML_NOTICE, "Finishing quota recovery in slot %u\n", slot_num);
+	printk(KERN_NOTICE "ocfs2: Finishing quota recovery on device (%s) for "
+	       "slot %u\n", osb->dev_str, slot_num);
+
 	mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
 	for (type = 0; type < MAXQUOTAS; type++) {
 		if (list_empty(&(rec->r_list[type])))
@@ -612,8 +616,9 @@
 		/* Someone else is holding the lock? Then he must be
 		 * doing the recovery. Just skip the file... */
 		if (status == -EAGAIN) {
-			mlog(ML_NOTICE, "skipping quota recovery for slot %d "
-			     "because quota file is locked.\n", slot_num);
+			printk(KERN_NOTICE "ocfs2: Skipping quota recovery on "
+			       "device (%s) for slot %d because quota file is "
+			       "locked.\n", osb->dev_str, slot_num);
 			status = 0;
 			goto out_put;
 		} else if (status < 0) {
@@ -944,7 +949,7 @@
 		      * ol_quota_entries_per_block(sb);
 	}
 
-	found = ocfs2_find_next_zero_bit(dchunk->dqc_bitmap, len, 0);
+	found = ocfs2_find_next_zero_bit_unaligned(dchunk->dqc_bitmap, len, 0);
 	/* We failed? */
 	if (found == len) {
 		mlog(ML_ERROR, "Did not find empty entry in chunk %d with %u"
@@ -1208,7 +1213,7 @@
 	struct ocfs2_local_disk_chunk *dchunk;
 
 	dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data;
-	ocfs2_set_bit(*offset, dchunk->dqc_bitmap);
+	ocfs2_set_bit_unaligned(*offset, dchunk->dqc_bitmap);
 	le32_add_cpu(&dchunk->dqc_free, -1);
 }
 
@@ -1289,7 +1294,7 @@
 			(od->dq_chunk->qc_headerbh->b_data);
 	/* Mark structure as freed */
 	lock_buffer(od->dq_chunk->qc_headerbh);
-	ocfs2_clear_bit(offset, dchunk->dqc_bitmap);
+	ocfs2_clear_bit_unaligned(offset, dchunk->dqc_bitmap);
 	le32_add_cpu(&dchunk->dqc_free, 1);
 	unlock_buffer(od->dq_chunk->qc_headerbh);
 	ocfs2_journal_dirty(handle, od->dq_chunk->qc_headerbh);
diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c
index 26fc001..1424c15 100644
--- a/fs/ocfs2/slot_map.c
+++ b/fs/ocfs2/slot_map.c
@@ -493,8 +493,8 @@
 			goto bail;
 		}
 	} else
-		mlog(ML_NOTICE, "slot %d is already allocated to this node!\n",
-		     slot);
+		printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
+		       "allocated to this node!\n", slot, osb->dev_str);
 
 	ocfs2_set_slot(si, slot, osb->node_num);
 	osb->slot_num = slot;
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index 19965b0..9436801 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -28,6 +28,7 @@
 #include "cluster/masklog.h"
 #include "cluster/nodemanager.h"
 #include "cluster/heartbeat.h"
+#include "cluster/tcp.h"
 
 #include "stackglue.h"
 
@@ -256,6 +257,61 @@
 }
 
 /*
+ * Check if this node is heartbeating and is connected to all other
+ * heartbeating nodes.
+ */
+static int o2cb_cluster_check(void)
+{
+	u8 node_num;
+	int i;
+	unsigned long hbmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
+	unsigned long netmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
+
+	node_num = o2nm_this_node();
+	if (node_num == O2NM_MAX_NODES) {
+		printk(KERN_ERR "o2cb: This node has not been configured.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * o2dlm expects o2net sockets to be created. If not, then
+	 * dlm_join_domain() fails with a stack of errors which are both cryptic
+	 * and incomplete. The idea here is to detect upfront whether we have
+	 * managed to connect to all nodes or not. If not, then list the nodes
+	 * to allow the user to check the configuration (incorrect IP, firewall,
+	 * etc.) Yes, this is racy. But its not the end of the world.
+	 */
+#define	O2CB_MAP_STABILIZE_COUNT	60
+	for (i = 0; i < O2CB_MAP_STABILIZE_COUNT; ++i) {
+		o2hb_fill_node_map(hbmap, sizeof(hbmap));
+		if (!test_bit(node_num, hbmap)) {
+			printk(KERN_ERR "o2cb: %s heartbeat has not been "
+			       "started.\n", (o2hb_global_heartbeat_active() ?
+					      "Global" : "Local"));
+			return -EINVAL;
+		}
+		o2net_fill_node_map(netmap, sizeof(netmap));
+		/* Force set the current node to allow easy compare */
+		set_bit(node_num, netmap);
+		if (!memcmp(hbmap, netmap, sizeof(hbmap)))
+			return 0;
+		if (i < O2CB_MAP_STABILIZE_COUNT)
+			msleep(1000);
+	}
+
+	printk(KERN_ERR "o2cb: This node could not connect to nodes:");
+	i = -1;
+	while ((i = find_next_bit(hbmap, O2NM_MAX_NODES,
+				  i + 1)) < O2NM_MAX_NODES) {
+		if (!test_bit(i, netmap))
+			printk(" %u", i);
+	}
+	printk(".\n");
+
+	return -ENOTCONN;
+}
+
+/*
  * Called from the dlm when it's about to evict a node. This is how the
  * classic stack signals node death.
  */
@@ -263,8 +319,8 @@
 {
 	struct ocfs2_cluster_connection *conn = data;
 
-	mlog(ML_NOTICE, "o2dlm has evicted node %d from group %.*s\n",
-	     node_num, conn->cc_namelen, conn->cc_name);
+	printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n",
+	       node_num, conn->cc_namelen, conn->cc_name);
 
 	conn->cc_recovery_handler(node_num, conn->cc_recovery_data);
 }
@@ -280,12 +336,11 @@
 	BUG_ON(conn == NULL);
 	BUG_ON(conn->cc_proto == NULL);
 
-	/* for now we only have one cluster/node, make sure we see it
-	 * in the heartbeat universe */
-	if (!o2hb_check_local_node_heartbeating()) {
-		if (o2hb_global_heartbeat_active())
-			mlog(ML_ERROR, "Global heartbeat not started\n");
-		rc = -EINVAL;
+	/* Ensure cluster stack is up and all nodes are connected */
+	rc = o2cb_cluster_check();
+	if (rc) {
+		printk(KERN_ERR "o2cb: Cluster check failed. Fix errors "
+		       "before retrying.\n");
 		goto out;
 	}
 
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 56f6102..4994f8b 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -54,6 +54,7 @@
 #include "ocfs1_fs_compat.h"
 
 #include "alloc.h"
+#include "aops.h"
 #include "blockcheck.h"
 #include "dlmglue.h"
 #include "export.h"
@@ -1107,9 +1108,9 @@
 
 		ocfs2_set_ro_flag(osb, 1);
 
-		printk(KERN_NOTICE "Readonly device detected. No cluster "
-		       "services will be utilized for this mount. Recovery "
-		       "will be skipped.\n");
+		printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. "
+		       "Cluster services will not be used for this mount. "
+		       "Recovery will be skipped.\n", osb->dev_str);
 	}
 
 	if (!ocfs2_is_hard_readonly(osb)) {
@@ -1616,12 +1617,17 @@
 	return 0;
 }
 
+wait_queue_head_t ocfs2__ioend_wq[OCFS2_IOEND_WQ_HASH_SZ];
+
 static int __init ocfs2_init(void)
 {
-	int status;
+	int status, i;
 
 	ocfs2_print_version();
 
+	for (i = 0; i < OCFS2_IOEND_WQ_HASH_SZ; i++)
+		init_waitqueue_head(&ocfs2__ioend_wq[i]);
+
 	status = init_ocfs2_uptodate_cache();
 	if (status < 0) {
 		mlog_errno(status);
@@ -1760,7 +1766,7 @@
 	ocfs2_extent_map_init(&oi->vfs_inode);
 	INIT_LIST_HEAD(&oi->ip_io_markers);
 	oi->ip_dir_start_lookup = 0;
-
+	atomic_set(&oi->ip_unaligned_aio, 0);
 	init_rwsem(&oi->ip_alloc_sem);
 	init_rwsem(&oi->ip_xattr_sem);
 	mutex_init(&oi->ip_io_mutex);
@@ -1974,7 +1980,8 @@
 	 * If we failed before we got a uuid_str yet, we can't stop
 	 * heartbeat.  Otherwise, do it.
 	 */
-	if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str)
+	if (!mnt_err && !ocfs2_mount_local(osb) && osb->uuid_str &&
+	    !ocfs2_is_hard_readonly(osb))
 		hangup_needed = 1;
 
 	if (osb->cconn)
@@ -2353,7 +2360,7 @@
 		mlog_errno(status);
 		goto bail;
 	}
-	cleancache_init_shared_fs((char *)&uuid_net_key, sb);
+	cleancache_init_shared_fs((char *)&di->id2.i_super.s_uuid, sb);
 
 bail:
 	return status;
@@ -2462,8 +2469,8 @@
 			goto finally;
 		}
 	} else {
-		mlog(ML_NOTICE, "File system was not unmounted cleanly, "
-		     "recovering volume.\n");
+		printk(KERN_NOTICE "ocfs2: File system on device (%s) was not "
+		       "unmounted cleanly, recovering it.\n", osb->dev_str);
 	}
 
 	local = ocfs2_mount_local(osb);
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 194fb22..aa9e877 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -2376,16 +2376,18 @@
 		}
 
 		ret = ocfs2_xattr_value_truncate(inode, vb, 0, &ctxt);
-		if (ret < 0) {
-			mlog_errno(ret);
-			break;
-		}
 
 		ocfs2_commit_trans(osb, ctxt.handle);
 		if (ctxt.meta_ac) {
 			ocfs2_free_alloc_context(ctxt.meta_ac);
 			ctxt.meta_ac = NULL;
 		}
+
+		if (ret < 0) {
+			mlog_errno(ret);
+			break;
+		}
+
 	}
 
 	if (ctxt.meta_ac)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 2db1bd3..851ba3d 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1652,46 +1652,12 @@
 	return error;
 }
 
-static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
-		struct kstat *stat)
-{
-	struct inode *inode = dentry->d_inode;
-	struct task_struct *task = get_proc_task(inode);
-	int rc;
-
-	if (task == NULL)
-		return -ESRCH;
-
-	rc = -EACCES;
-	if (lock_trace(task))
-		goto out_task;
-
-	generic_fillattr(inode, stat);
-	unlock_trace(task);
-	rc = 0;
-out_task:
-	put_task_struct(task);
-	return rc;
-}
-
 static const struct inode_operations proc_pid_link_inode_operations = {
 	.readlink	= proc_pid_readlink,
 	.follow_link	= proc_pid_follow_link,
 	.setattr	= proc_setattr,
 };
 
-static const struct inode_operations proc_fdinfo_link_inode_operations = {
-	.setattr	= proc_setattr,
-	.getattr	= proc_pid_fd_link_getattr,
-};
-
-static const struct inode_operations proc_fd_link_inode_operations = {
-	.readlink	= proc_pid_readlink,
-	.follow_link	= proc_pid_follow_link,
-	.setattr	= proc_setattr,
-	.getattr	= proc_pid_fd_link_getattr,
-};
-
 
 /* building an inode */
 
@@ -1923,61 +1889,49 @@
 
 static int proc_fd_info(struct inode *inode, struct path *path, char *info)
 {
-	struct task_struct *task;
-	struct files_struct *files;
+	struct task_struct *task = get_proc_task(inode);
+	struct files_struct *files = NULL;
 	struct file *file;
 	int fd = proc_fd(inode);
-	int rc;
 
-	task = get_proc_task(inode);
-	if (!task)
-		return -ENOENT;
+	if (task) {
+		files = get_files_struct(task);
+		put_task_struct(task);
+	}
+	if (files) {
+		/*
+		 * We are not taking a ref to the file structure, so we must
+		 * hold ->file_lock.
+		 */
+		spin_lock(&files->file_lock);
+		file = fcheck_files(files, fd);
+		if (file) {
+			unsigned int f_flags;
+			struct fdtable *fdt;
 
-	rc = -EACCES;
-	if (lock_trace(task))
-		goto out_task;
+			fdt = files_fdtable(files);
+			f_flags = file->f_flags & ~O_CLOEXEC;
+			if (FD_ISSET(fd, fdt->close_on_exec))
+				f_flags |= O_CLOEXEC;
 
-	rc = -ENOENT;
-	files = get_files_struct(task);
-	if (files == NULL)
-		goto out_unlock;
-
-	/*
-	 * We are not taking a ref to the file structure, so we must
-	 * hold ->file_lock.
-	 */
-	spin_lock(&files->file_lock);
-	file = fcheck_files(files, fd);
-	if (file) {
-		unsigned int f_flags;
-		struct fdtable *fdt;
-
-		fdt = files_fdtable(files);
-		f_flags = file->f_flags & ~O_CLOEXEC;
-		if (FD_ISSET(fd, fdt->close_on_exec))
-			f_flags |= O_CLOEXEC;
-
-		if (path) {
-			*path = file->f_path;
-			path_get(&file->f_path);
+			if (path) {
+				*path = file->f_path;
+				path_get(&file->f_path);
+			}
+			if (info)
+				snprintf(info, PROC_FDINFO_MAX,
+					 "pos:\t%lli\n"
+					 "flags:\t0%o\n",
+					 (long long) file->f_pos,
+					 f_flags);
+			spin_unlock(&files->file_lock);
+			put_files_struct(files);
+			return 0;
 		}
-		if (info)
-			snprintf(info, PROC_FDINFO_MAX,
-				 "pos:\t%lli\n"
-				 "flags:\t0%o\n",
-				 (long long) file->f_pos,
-				 f_flags);
-		rc = 0;
-	} else
-		rc = -ENOENT;
-	spin_unlock(&files->file_lock);
-	put_files_struct(files);
-
-out_unlock:
-	unlock_trace(task);
-out_task:
-	put_task_struct(task);
-	return rc;
+		spin_unlock(&files->file_lock);
+		put_files_struct(files);
+	}
+	return -ENOENT;
 }
 
 static int proc_fd_link(struct inode *inode, struct path *path)
@@ -2072,7 +2026,7 @@
 	spin_unlock(&files->file_lock);
 	put_files_struct(files);
 
-	inode->i_op = &proc_fd_link_inode_operations;
+	inode->i_op = &proc_pid_link_inode_operations;
 	inode->i_size = 64;
 	ei->op.proc_get_link = proc_fd_link;
 	d_set_d_op(dentry, &tid_fd_dentry_operations);
@@ -2104,12 +2058,7 @@
 	if (fd == ~0U)
 		goto out;
 
-	result = ERR_PTR(-EACCES);
-	if (lock_trace(task))
-		goto out;
-
 	result = instantiate(dir, dentry, task, &fd);
-	unlock_trace(task);
 out:
 	put_task_struct(task);
 out_no_task:
@@ -2129,28 +2078,23 @@
 	retval = -ENOENT;
 	if (!p)
 		goto out_no_task;
-
-	retval = -EACCES;
-	if (lock_trace(p))
-		goto out;
-
 	retval = 0;
 
 	fd = filp->f_pos;
 	switch (fd) {
 		case 0:
 			if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
-				goto out_unlock;
+				goto out;
 			filp->f_pos++;
 		case 1:
 			ino = parent_ino(dentry);
 			if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
-				goto out_unlock;
+				goto out;
 			filp->f_pos++;
 		default:
 			files = get_files_struct(p);
 			if (!files)
-				goto out_unlock;
+				goto out;
 			rcu_read_lock();
 			for (fd = filp->f_pos-2;
 			     fd < files_fdtable(files)->max_fds;
@@ -2174,9 +2118,6 @@
 			rcu_read_unlock();
 			put_files_struct(files);
 	}
-
-out_unlock:
-	unlock_trace(p);
 out:
 	put_task_struct(p);
 out_no_task:
@@ -2254,7 +2195,6 @@
 	ei->fd = fd;
 	inode->i_mode = S_IFREG | S_IRUSR;
 	inode->i_fop = &proc_fdinfo_file_operations;
-	inode->i_op = &proc_fdinfo_link_inode_operations;
 	d_set_d_op(dentry, &tid_fd_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index cd99bf5..b0f450a 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -12,6 +12,7 @@
 #include <linux/user.h>
 #include <linux/elf.h>
 #include <linux/elfcore.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 2bd620f..57bbf90 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -167,6 +167,7 @@
 	}
 
 	psinfo = psi;
+	mutex_init(&psinfo->read_mutex);
 	spin_unlock(&pstore_lock);
 
 	if (owner && !try_module_get(owner)) {
@@ -195,30 +196,32 @@
 void pstore_get_records(int quiet)
 {
 	struct pstore_info *psi = psinfo;
+	char			*buf = NULL;
 	ssize_t			size;
 	u64			id;
 	enum pstore_type_id	type;
 	struct timespec		time;
 	int			failed = 0, rc;
-	unsigned long		flags;
 
 	if (!psi)
 		return;
 
-	spin_lock_irqsave(&psinfo->buf_lock, flags);
+	mutex_lock(&psi->read_mutex);
 	rc = psi->open(psi);
 	if (rc)
 		goto out;
 
-	while ((size = psi->read(&id, &type, &time, psi)) > 0) {
-		rc = pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
+	while ((size = psi->read(&id, &type, &time, &buf, psi)) > 0) {
+		rc = pstore_mkfile(type, psi->name, id, buf, (size_t)size,
 				  time, psi);
+		kfree(buf);
+		buf = NULL;
 		if (rc && (rc != -EEXIST || !quiet))
 			failed++;
 	}
 	psi->close(psi);
 out:
-	spin_unlock_irqrestore(&psinfo->buf_lock, flags);
+	mutex_unlock(&psi->read_mutex);
 
 	if (failed)
 		printk(KERN_WARNING "pstore: failed to load %d record(s) from '%s'\n",
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index aae0edb..35f4b0e 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -286,7 +286,7 @@
 		/* caller already holds s_umount */
 		if (sb->s_flags & MS_RDONLY)
 			return -EROFS;
-		writeback_inodes_sb(sb);
+		writeback_inodes_sb(sb, WB_REASON_SYNC);
 		return 0;
 	default:
 		return -EINVAL;
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index 048b59d..c70111e 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -78,6 +78,28 @@
 
 	  If unsure, say N.
 
+config SQUASHFS_4K_DEVBLK_SIZE
+	bool "Use 4K device block size?"
+	depends on SQUASHFS
+	help
+	  By default Squashfs sets the dev block size (sb_min_blocksize)
+	  to 1K or the smallest block size supported by the block device
+	  (if larger).  This, because blocks are packed together and
+	  unaligned in Squashfs, should reduce latency.
+
+	  This, however, gives poor performance on MTD NAND devices where
+	  the optimal I/O size is 4K (even though the devices can support
+	  smaller block sizes).
+
+	  Using a 4K device block size may also improve overall I/O
+	  performance for some file access patterns (e.g. sequential
+	  accesses of files in filesystem order) on all media.
+
+	  Setting this option will force Squashfs to use a 4K device block
+	  size by default.
+
+	  If unsure, say N.
+
 config SQUASHFS_EMBEDDED
 	bool "Additional option for memory-constrained systems"
 	depends on SQUASHFS
diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h
index b4a4e53..e8e1464 100644
--- a/fs/squashfs/squashfs_fs.h
+++ b/fs/squashfs/squashfs_fs.h
@@ -36,6 +36,13 @@
 #define SQUASHFS_FILE_SIZE		131072
 #define SQUASHFS_FILE_LOG		17
 
+/* default size of block device I/O */
+#ifdef CONFIG_SQUASHFS_4K_DEVBLK_SIZE
+#define SQUASHFS_DEVBLK_SIZE 4096
+#else
+#define SQUASHFS_DEVBLK_SIZE 1024
+#endif
+
 #define SQUASHFS_FILE_MAX_SIZE		1048576
 #define SQUASHFS_FILE_MAX_LOG		20
 
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 7438850..2da1715 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -95,7 +95,7 @@
 	}
 	msblk = sb->s_fs_info;
 
-	msblk->devblksize = sb_min_blocksize(sb, BLOCK_SIZE);
+	msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
 	msblk->devblksize_log2 = ffz(~msblk->devblksize);
 
 	mutex_init(&msblk->read_data_mutex);
diff --git a/fs/statfs.c b/fs/statfs.c
index 8244924..9cf04a1 100644
--- a/fs/statfs.c
+++ b/fs/statfs.c
@@ -76,7 +76,7 @@
 int user_statfs(const char __user *pathname, struct kstatfs *st)
 {
 	struct path path;
-	int error = user_path(pathname, &path);
+	int error = user_path_at(AT_FDCWD, pathname, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
 	if (!error) {
 		error = vfs_statfs(&path, st);
 		path_put(&path);
diff --git a/fs/sync.c b/fs/sync.c
index c98a747..101b8ef 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -43,7 +43,7 @@
 	if (wait)
 		sync_inodes_sb(sb);
 	else
-		writeback_inodes_sb(sb);
+		writeback_inodes_sb(sb, WB_REASON_SYNC);
 
 	if (sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, wait);
@@ -98,7 +98,7 @@
  */
 SYSCALL_DEFINE0(sync)
 {
-	wakeup_flusher_threads(0);
+	wakeup_flusher_threads(0, WB_REASON_SYNC);
 	sync_filesystems(0);
 	sync_filesystems(1);
 	if (unlikely(laptop_mode))
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 315de66..bc4f94b 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -63,7 +63,7 @@
 static void shrink_liability(struct ubifs_info *c, int nr_to_write)
 {
 	down_read(&c->vfs_sb->s_umount);
-	writeback_inodes_sb(c->vfs_sb);
+	writeback_inodes_sb(c->vfs_sb, WB_REASON_FS_FREE_SPACE);
 	up_read(&c->vfs_sb->s_umount);
 }
 
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index eef109a..b09ba2d 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -870,6 +870,22 @@
 	spin_unlock(&dbg_lock);
 }
 
+void dbg_dump_sleb(const struct ubifs_info *c,
+		   const struct ubifs_scan_leb *sleb, int offs)
+{
+	struct ubifs_scan_node *snod;
+
+	printk(KERN_DEBUG "(pid %d) start dumping scanned data from LEB %d:%d\n",
+	       current->pid, sleb->lnum, offs);
+
+	list_for_each_entry(snod, &sleb->nodes, list) {
+		cond_resched();
+		printk(KERN_DEBUG "Dumping node at LEB %d:%d len %d\n", sleb->lnum,
+		       snod->offs, snod->len);
+		dbg_dump_node(c, snod->node);
+	}
+}
+
 void dbg_dump_leb(const struct ubifs_info *c, int lnum)
 {
 	struct ubifs_scan_leb *sleb;
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index feb361e..8d9c468 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -269,6 +269,8 @@
 void dbg_dump_lprops(struct ubifs_info *c);
 void dbg_dump_lpt_info(struct ubifs_info *c);
 void dbg_dump_leb(const struct ubifs_info *c, int lnum);
+void dbg_dump_sleb(const struct ubifs_info *c,
+		   const struct ubifs_scan_leb *sleb, int offs);
 void dbg_dump_znode(const struct ubifs_info *c,
 		    const struct ubifs_znode *znode);
 void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat);
@@ -387,6 +389,9 @@
 static inline void dbg_dump_leb(const struct ubifs_info *c,
 				int lnum)                         { return; }
 static inline void
+dbg_dump_sleb(const struct ubifs_info *c,
+	      const struct ubifs_scan_leb *sleb, int offs)        { return; }
+static inline void
 dbg_dump_znode(const struct ubifs_info *c,
 	       const struct ubifs_znode *znode)                   { return; }
 static inline void dbg_dump_heap(struct ubifs_info *c,
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index af02790..ee4f43f 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -983,7 +983,7 @@
 }
 
 /**
- *  clean_an_unclean_leb - read and write a LEB to remove corruption.
+ * clean_an_unclean_leb - read and write a LEB to remove corruption.
  * @c: UBIFS file-system description object
  * @ucleb: unclean LEB information
  * @sbuf: LEB-sized buffer to use
diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c
index 93d938a..6094c5a 100644
--- a/fs/ubifs/sb.c
+++ b/fs/ubifs/sb.c
@@ -247,7 +247,7 @@
 	mst->total_dirty = cpu_to_le64(tmp64);
 
 	/*  The indexing LEB does not contribute to dark space */
-	tmp64 = (c->main_lebs - 1) * c->dark_wm;
+	tmp64 = ((long long)(c->main_lebs - 1) * c->dark_wm);
 	mst->total_dark = cpu_to_le64(tmp64);
 
 	mst->total_used = cpu_to_le64(UBIFS_INO_NODE_SZ);
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
index b6c4b37..76e4266 100644
--- a/fs/xfs/xfs_acl.c
+++ b/fs/xfs/xfs_acl.c
@@ -42,6 +42,8 @@
 	int count, i;
 
 	count = be32_to_cpu(aclp->acl_cnt);
+	if (count > XFS_ACL_MAX_ENTRIES)
+		return ERR_PTR(-EFSCORRUPTED);
 
 	acl = posix_acl_alloc(count, GFP_KERNEL);
 	if (!acl)
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 33b1331..574d4ee 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -189,7 +189,7 @@
 	int		error = 0;
 
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-		error = -EIO;
+		ioend->io_error = -EIO;
 		goto done;
 	}
 	if (ioend->io_error)
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index d4906e7..c1b55e5 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -110,6 +110,7 @@
 /*
  * Query whether the requested number of additional bytes of extended
  * attribute space will be able to fit inline.
+ *
  * Returns zero if not, else the di_forkoff fork offset to be used in the
  * literal area for attribute data once the new bytes have been added.
  *
@@ -122,7 +123,7 @@
 	int offset;
 	int minforkoff;	/* lower limit on valid forkoff locations */
 	int maxforkoff;	/* upper limit on valid forkoff locations */
-	int dsize;	
+	int dsize;
 	xfs_mount_t *mp = dp->i_mount;
 
 	offset = (XFS_LITINO(mp) - bytes) >> 3; /* rounded down */
@@ -136,47 +137,60 @@
 		return (offset >= minforkoff) ? minforkoff : 0;
 	}
 
-	if (!(mp->m_flags & XFS_MOUNT_ATTR2)) {
-		if (bytes <= XFS_IFORK_ASIZE(dp))
-			return dp->i_d.di_forkoff;
+	/*
+	 * If the requested numbers of bytes is smaller or equal to the
+	 * current attribute fork size we can always proceed.
+	 *
+	 * Note that if_bytes in the data fork might actually be larger than
+	 * the current data fork size is due to delalloc extents. In that
+	 * case either the extent count will go down when they are converted
+	 * to real extents, or the delalloc conversion will take care of the
+	 * literal area rebalancing.
+	 */
+	if (bytes <= XFS_IFORK_ASIZE(dp))
+		return dp->i_d.di_forkoff;
+
+	/*
+	 * For attr2 we can try to move the forkoff if there is space in the
+	 * literal area, but for the old format we are done if there is no
+	 * space in the fixed attribute fork.
+	 */
+	if (!(mp->m_flags & XFS_MOUNT_ATTR2))
 		return 0;
-	}
 
 	dsize = dp->i_df.if_bytes;
-	
+
 	switch (dp->i_d.di_format) {
 	case XFS_DINODE_FMT_EXTENTS:
-		/* 
+		/*
 		 * If there is no attr fork and the data fork is extents, 
-		 * determine if creating the default attr fork will result 
-		 * in the extents form migrating to btree. If so, the 
-		 * minimum offset only needs to be the space required for 
+		 * determine if creating the default attr fork will result
+		 * in the extents form migrating to btree. If so, the
+		 * minimum offset only needs to be the space required for
 		 * the btree root.
-		 */ 
+		 */
 		if (!dp->i_d.di_forkoff && dp->i_df.if_bytes >
 		    xfs_default_attroffset(dp))
 			dsize = XFS_BMDR_SPACE_CALC(MINDBTPTRS);
 		break;
-		
 	case XFS_DINODE_FMT_BTREE:
 		/*
-		 * If have data btree then keep forkoff if we have one,
-		 * otherwise we are adding a new attr, so then we set 
-		 * minforkoff to where the btree root can finish so we have 
+		 * If we have a data btree then keep forkoff if we have one,
+		 * otherwise we are adding a new attr, so then we set
+		 * minforkoff to where the btree root can finish so we have
 		 * plenty of room for attrs
 		 */
 		if (dp->i_d.di_forkoff) {
-			if (offset < dp->i_d.di_forkoff) 
+			if (offset < dp->i_d.di_forkoff)
 				return 0;
-			else 
-				return dp->i_d.di_forkoff;
-		} else
-			dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot);
+			return dp->i_d.di_forkoff;
+		}
+		dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot);
 		break;
 	}
-	
-	/* 
-	 * A data fork btree root must have space for at least 
+
+	/*
+	 * A data fork btree root must have space for at least
 	 * MINDBTPTRS key/ptr pairs if the data fork is small or empty.
 	 */
 	minforkoff = MAX(dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS));
@@ -186,10 +200,10 @@
 	maxforkoff = XFS_LITINO(mp) - XFS_BMDR_SPACE_CALC(MINABTPTRS);
 	maxforkoff = maxforkoff >> 3;	/* rounded down */
 
-	if (offset >= minforkoff && offset < maxforkoff)
-		return offset;
 	if (offset >= maxforkoff)
 		return maxforkoff;
+	if (offset >= minforkoff)
+		return offset;
 	return 0;
 }
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 1a35138..eac97ef 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -656,7 +656,7 @@
 /*
  * This is the ops vector shared by all buf log items.
  */
-static struct xfs_item_ops xfs_buf_item_ops = {
+static const struct xfs_item_ops xfs_buf_item_ops = {
 	.iop_size	= xfs_buf_item_size,
 	.iop_format	= xfs_buf_item_format,
 	.iop_pin	= xfs_buf_item_pin,
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index bb3f71d..0dee0b7 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -295,7 +295,7 @@
 /*
  * This is the ops vector for dquots
  */
-static struct xfs_item_ops xfs_dquot_item_ops = {
+static const struct xfs_item_ops xfs_dquot_item_ops = {
 	.iop_size	= xfs_qm_dquot_logitem_size,
 	.iop_format	= xfs_qm_dquot_logitem_format,
 	.iop_pin	= xfs_qm_dquot_logitem_pin,
@@ -483,7 +483,7 @@
 {
 }
 
-static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
 	.iop_size	= xfs_qm_qoff_logitem_size,
 	.iop_format	= xfs_qm_qoff_logitem_format,
 	.iop_pin	= xfs_qm_qoff_logitem_pin,
@@ -498,7 +498,7 @@
 /*
  * This is the ops vector shared by all quotaoff-start log items.
  */
-static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
 	.iop_size	= xfs_qm_qoff_logitem_size,
 	.iop_format	= xfs_qm_qoff_logitem_format,
 	.iop_pin	= xfs_qm_qoff_logitem_pin,
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index d22e626..35c2aff 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -217,7 +217,7 @@
 /*
  * This is the ops vector shared by all efi log items.
  */
-static struct xfs_item_ops xfs_efi_item_ops = {
+static const struct xfs_item_ops xfs_efi_item_ops = {
 	.iop_size	= xfs_efi_item_size,
 	.iop_format	= xfs_efi_item_format,
 	.iop_pin	= xfs_efi_item_pin,
@@ -477,7 +477,7 @@
 /*
  * This is the ops vector shared by all efd log items.
  */
-static struct xfs_item_ops xfs_efd_item_ops = {
+static const struct xfs_item_ops xfs_efd_item_ops = {
 	.iop_size	= xfs_efd_item_size,
 	.iop_format	= xfs_efd_item_format,
 	.iop_pin	= xfs_efd_item_pin,
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index c0237c6..755ee81 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2835,6 +2835,27 @@
 	return XFS_ERROR(EFSCORRUPTED);
 }
 
+void
+xfs_promote_inode(
+	struct xfs_inode	*ip)
+{
+	struct xfs_buf		*bp;
+
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
+
+	bp = xfs_incore(ip->i_mount->m_ddev_targp, ip->i_imap.im_blkno,
+			ip->i_imap.im_len, XBF_TRYLOCK);
+	if (!bp)
+		return;
+
+	if (XFS_BUF_ISDELAYWRITE(bp)) {
+		xfs_buf_delwri_promote(bp);
+		wake_up_process(ip->i_mount->m_ddev_targp->bt_task);
+	}
+
+	xfs_buf_relse(bp);
+}
+
 /*
  * Return a pointer to the extent record at file index idx.
  */
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 760140d..b4cd473 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -498,6 +498,7 @@
 void		xfs_iext_realloc(xfs_inode_t *, int, int);
 void		xfs_iunpin_wait(xfs_inode_t *);
 int		xfs_iflush(xfs_inode_t *, uint);
+void		xfs_promote_inode(struct xfs_inode *);
 void		xfs_lock_inodes(xfs_inode_t **, int, uint);
 void		xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
 
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index b7cf21b..abaafdb 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -795,7 +795,7 @@
 /*
  * This is the ops vector shared by all buf log items.
  */
-static struct xfs_item_ops xfs_inode_item_ops = {
+static const struct xfs_item_ops xfs_inode_item_ops = {
 	.iop_size	= xfs_inode_item_size,
 	.iop_format	= xfs_inode_item_format,
 	.iop_pin	= xfs_inode_item_pin,
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 2758a62..a14cd89 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -626,7 +626,7 @@
 	struct xfs_mount	*mp,
 	struct xfs_log_item	*item,
 	int			type,
-	struct xfs_item_ops	*ops)
+	const struct xfs_item_ops *ops)
 {
 	item->li_mountp = mp;
 	item->li_ailp = mp->m_ail;
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 78c9039..3f7bf45 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -137,7 +137,7 @@
 void	xfs_log_item_init(struct xfs_mount	*mp,
 			struct xfs_log_item	*item,
 			int			type,
-			struct xfs_item_ops	*ops);
+			const struct xfs_item_ops *ops);
 
 xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
 		       struct xlog_ticket *ticket,
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 5cff443..0bbb1a4 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -674,7 +674,8 @@
 	 * disk and we didn't ask it to allocate;
 	 * ESRCH if quotas got turned off suddenly.
 	 */
-	error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp);
+	error = xfs_qm_dqget(ip->i_mount, ip, id, type,
+			     doalloc | XFS_QMOPT_DOWARN, &dqp);
 	if (error)
 		return error;
 
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index aa3dc1a..be5c51d 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -770,6 +770,17 @@
 	if (!xfs_iflock_nowait(ip)) {
 		if (!(sync_mode & SYNC_WAIT))
 			goto out;
+
+		/*
+		 * If we only have a single dirty inode in a cluster there is
+		 * a fair chance that the AIL push may have pushed it into
+		 * the buffer, but xfsbufd won't touch it until 30 seconds
+		 * from now, and thus we will lock up here.
+		 *
+		 * Promote the inode buffer to the front of the delwri list
+		 * and wake up xfsbufd now.
+		 */
+		xfs_promote_inode(ip);
 		xfs_iflock(ip);
 	}
 
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 603f3eb..3ae713c 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -326,7 +326,7 @@
 						 struct xfs_log_item *);
 							/* buffer item iodone */
 							/* callback func */
-	struct xfs_item_ops		*li_ops;	/* function list */
+	const struct xfs_item_ops	*li_ops;	/* function list */
 
 	/* delayed logging */
 	struct list_head		li_cil;		/* CIL pointers */
@@ -341,7 +341,7 @@
 	{ XFS_LI_IN_AIL,	"IN_AIL" }, \
 	{ XFS_LI_ABORTED,	"ABORTED" }
 
-typedef struct xfs_item_ops {
+struct xfs_item_ops {
 	uint (*iop_size)(xfs_log_item_t *);
 	void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
 	void (*iop_pin)(xfs_log_item_t *);
@@ -352,7 +352,7 @@
 	void (*iop_push)(xfs_log_item_t *);
 	bool (*iop_pushbuf)(xfs_log_item_t *);
 	void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
-} xfs_item_ops_t;
+};
 
 #define IOP_SIZE(ip)		(*(ip)->li_ops->iop_size)(ip)
 #define IOP_FORMAT(ip,vp)	(*(ip)->li_ops->iop_format)(ip, vp)
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 4ecf2a5..ce9268a 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -112,7 +112,7 @@
 	char		*link)
 {
 	xfs_mount_t	*mp = ip->i_mount;
-	int		pathlen;
+	xfs_fsize_t	pathlen;
 	int		error = 0;
 
 	trace_xfs_readlink(ip);
@@ -122,13 +122,19 @@
 
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 
-	ASSERT(S_ISLNK(ip->i_d.di_mode));
-	ASSERT(ip->i_d.di_size <= MAXPATHLEN);
-
 	pathlen = ip->i_d.di_size;
 	if (!pathlen)
 		goto out;
 
+	if (pathlen < 0 || pathlen > MAXPATHLEN) {
+		xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
+			 __func__, (unsigned long long) ip->i_ino,
+			 (long long) pathlen);
+		ASSERT(0);
+		return XFS_ERROR(EFSCORRUPTED);
+	}
+
+
 	if (ip->i_df.if_flags & XFS_IFINLINE) {
 		memcpy(link, ip->i_df.if_u1.if_data, pathlen);
 		link[pathlen] = '\0';
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index e49c36d..bb145e4 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -144,7 +144,7 @@
 {
 }
 static inline int register_hotplug_dock_device(acpi_handle handle,
-					       struct acpi_dock_ops *ops,
+					       const struct acpi_dock_ops *ops,
 					       void *context)
 {
 	return -ENODEV;
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index b67231b..ed73f67 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -470,7 +470,6 @@
  */
 #define ACPI_FULL_INITIALIZATION        0x00
 #define ACPI_NO_ADDRESS_SPACE_INIT      0x01
-#define ACPI_NO_HARDWARE_INIT           0x02
 #define ACPI_NO_EVENT_INIT              0x04
 #define ACPI_NO_HANDLER_INIT            0x08
 #define ACPI_NO_ACPI_ENABLE             0x10
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index f72403c..f4b2eff 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -55,7 +55,6 @@
 
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/ctype.h>
 #include <linux/sched.h>
 #include <asm/system.h>
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 67055f1..610f6fb 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -329,6 +329,7 @@
 int acpi_processor_power_init(struct acpi_processor *pr,
 			      struct acpi_device *device);
 int acpi_processor_cst_has_changed(struct acpi_processor *pr);
+int acpi_processor_hotplug(struct acpi_processor *pr);
 int acpi_processor_power_exit(struct acpi_processor *pr,
 			      struct acpi_device *device);
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index cf3b446..1f9e951 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -42,7 +42,6 @@
  * can build the DRM (part of PI DRI). 4/21/2000 S + B */
 #include <asm/current.h>
 #endif				/* __alpha__ */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
@@ -80,6 +79,8 @@
 #define __OS_HAS_AGP (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
 #define __OS_HAS_MTRR (defined(CONFIG_MTRR))
 
+struct module;
+
 struct drm_file;
 struct drm_device;
 
@@ -989,7 +990,9 @@
 	struct proc_dir_entry *proc_root;  /**< proc directory entry */
 	struct drm_info_node proc_nodes;
 	struct dentry *debugfs_root;
-	struct drm_info_node debugfs_nodes;
+
+	struct list_head debugfs_list;
+	struct mutex debugfs_lock; /* Protects debugfs_list. */
 
 	struct drm_master *master; /* currently active master for this node */
 	struct list_head master_list;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 0d2f727e..93df2d7 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -72,6 +72,7 @@
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
+#define DP_EDP_CONFIGURATION_CAP            0x00d
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e
 
 #define DP_PSR_SUPPORT                      0x070
@@ -159,6 +160,8 @@
 # define DP_CP_IRQ			    (1 << 2)
 # define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
 
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index c4961ea..ddd46db 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -120,11 +120,12 @@
 	struct drm_mode_modeinfo mode;
 };
 
-#define DRM_MODE_ENCODER_NONE	0
-#define DRM_MODE_ENCODER_DAC	1
-#define DRM_MODE_ENCODER_TMDS	2
-#define DRM_MODE_ENCODER_LVDS	3
-#define DRM_MODE_ENCODER_TVDAC	4
+#define DRM_MODE_ENCODER_NONE	 0
+#define DRM_MODE_ENCODER_DAC	 1
+#define DRM_MODE_ENCODER_TMDS	 2
+#define DRM_MODE_ENCODER_LVDS	 3
+#define DRM_MODE_ENCODER_TVDAC	 4
+#define DRM_MODE_ENCODER_VIRTUAL 5
 
 struct drm_mode_get_encoder {
 	__u32 encoder_id;
@@ -162,6 +163,7 @@
 #define DRM_MODE_CONNECTOR_HDMIB	12
 #define DRM_MODE_CONNECTOR_TV		13
 #define DRM_MODE_CONNECTOR_eDP		14
+#define DRM_MODE_CONNECTOR_VIRTUAL      15
 
 struct drm_mode_get_connector {
 
@@ -233,6 +235,8 @@
 #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
 #define DRM_MODE_FB_DIRTY_FLAGS         0x03
 
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS     256
+
 /*
  * Mark a region of a framebuffer as dirty.
  *
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 3d53efd..4e4fbb8 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -4,6 +4,7 @@
 */
 #define radeon_PCI_IDS \
 	{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -55,6 +56,7 @@
 	{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
@@ -195,6 +197,14 @@
 	{0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
index 874c4d2..1205043 100644
--- a/include/drm/exynos_drm.h
+++ b/include/drm/exynos_drm.h
@@ -32,13 +32,14 @@
 /**
  * User-desired buffer creation information structure.
  *
- * @size: requested size for the object.
+ * @size: user-desired memory allocation size.
  *	- this size value would be page-aligned internally.
  * @flags: user request for setting memory type or cache attributes.
- * @handle: returned handle for the object.
+ * @handle: returned a handle to created gem object.
+ *	- this handle will be set by gem module of kernel side.
  */
 struct drm_exynos_gem_create {
-	unsigned int size;
+	uint64_t size;
 	unsigned int flags;
 	unsigned int handle;
 };
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index b65be60..be94be6 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -874,6 +874,10 @@
 
 #define RADEON_CHUNK_ID_RELOCS	0x01
 #define RADEON_CHUNK_ID_IB	0x02
+#define RADEON_CHUNK_ID_FLAGS	0x03
+
+/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */
+#define RADEON_CS_KEEP_TILING_FLAGS 0x01
 
 struct drm_radeon_cs_chunk {
 	uint32_t		chunk_id;
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index cd7cd81..bcb0912 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -54,7 +54,7 @@
 #define DRM_VMW_FENCE_EVENT          17
 #define DRM_VMW_PRESENT              18
 #define DRM_VMW_PRESENT_READBACK     19
-
+#define DRM_VMW_UPDATE_LAYOUT        20
 
 /*************************************************************************/
 /**
@@ -552,31 +552,6 @@
 
 /*************************************************************************/
 /**
- * DRM_VMW_UPDATE_LAYOUT - Update layout
- *
- * Updates the preferred modes and connection status for connectors. The
- * command conisits of one drm_vmw_update_layout_arg pointing out a array
- * of num_outputs drm_vmw_rect's.
- */
-
-/**
- * struct drm_vmw_update_layout_arg
- *
- * @num_outputs: number of active
- * @rects: pointer to array of drm_vmw_rect
- *
- * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
- */
-
-struct drm_vmw_update_layout_arg {
-	uint32_t num_outputs;
-	uint32_t pad64;
-	uint64_t rects;
-};
-
-
-/*************************************************************************/
-/**
  * DRM_VMW_FENCE_WAIT
  *
  * Waits for a fence object to signal. The wait is interruptible, so that
@@ -788,4 +763,28 @@
 	 uint64_t clips_ptr;
 	 uint64_t fence_rep;
 };
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the preferred modes and connection status for connectors. The
+ * command consists of one drm_vmw_update_layout_arg pointing to an array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active connectors
+ * @rects: pointer to array of drm_vmw_rect cast to an uint64_t
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+struct drm_vmw_update_layout_arg {
+	uint32_t num_outputs;
+	uint32_t pad64;
+	uint64_t rects;
+};
+
 #endif
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index e6e28f3..9eabffb 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -47,6 +47,9 @@
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
  * @cctl_opt: default options for the channel control register
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -65,6 +68,7 @@
 	int max_signal;
 	u32 muxval;
 	u32 cctl;
+	bool device_fc;
 	dma_addr_t addr;
 	bool circular_buffer;
 	bool single;
@@ -77,13 +81,11 @@
  * @addr: current address
  * @maxwidth: the maximum width of a transfer on this bus
  * @buswidth: the width of this bus in bytes: 1, 2 or 4
- * @fill_bytes: bytes required to fill to the next bus memory boundary
  */
 struct pl08x_bus_data {
 	dma_addr_t addr;
 	u8 maxwidth;
 	u8 buswidth;
-	size_t fill_bytes;
 };
 
 /**
@@ -104,17 +106,35 @@
 };
 
 /**
+ * struct pl08x_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct pl08x_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/**
  * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @tx: async tx descriptor
+ * @node: node for txd list for channels
+ * @dsg_list: list of children sg's
+ * @direction: direction of transfer
  * @llis_bus: DMA memory address (physical) start for the LLIs
  * @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
  */
 struct pl08x_txd {
 	struct dma_async_tx_descriptor tx;
 	struct list_head node;
+	struct list_head dsg_list;
 	enum dma_data_direction	direction;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	size_t len;
 	dma_addr_t llis_bus;
 	struct pl08x_lli *llis_va;
 	/* Default cctl value for LLIs */
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index cbee7de..d12f077 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -19,12 +19,8 @@
 	 * Peri_Req i/f of the DMAC that is
 	 * peripheral could be reached from.
 	 */
-	u8 peri_id; /* {0, 31} */
+	u8 peri_id; /* specific dma id */
 	enum pl330_reqtype rqtype;
-
-	/* For M->D and D->M Channels */
-	int burst_sz; /* in power of 2 */
-	dma_addr_t fifo_addr;
 };
 
 struct dma_pl330_platdata {
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 3b2f9cb..b1038bd 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -40,6 +40,7 @@
 enum bdi_stat_item {
 	BDI_RECLAIMABLE,
 	BDI_WRITEBACK,
+	BDI_DIRTIED,
 	BDI_WRITTEN,
 	NR_BDI_STAT_ITEMS
 };
@@ -74,10 +75,20 @@
 	struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
 
 	unsigned long bw_time_stamp;	/* last time write bw is updated */
+	unsigned long dirtied_stamp;
 	unsigned long written_stamp;	/* pages written at bw_time_stamp */
 	unsigned long write_bandwidth;	/* the estimated write bandwidth */
 	unsigned long avg_write_bandwidth; /* further smoothed write bw */
 
+	/*
+	 * The base dirty throttle rate, re-calculated on every 200ms.
+	 * All the bdi tasks' dirty rate will be curbed under it.
+	 * @dirty_ratelimit tracks the estimated @balanced_dirty_ratelimit
+	 * in small steps and is much more smooth/stable than the latter.
+	 */
+	unsigned long dirty_ratelimit;
+	unsigned long balanced_dirty_ratelimit;
+
 	struct prop_local_percpu completions;
 	int dirty_exceeded;
 
@@ -107,7 +118,8 @@
 int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
 void bdi_unregister(struct backing_dev_info *bdi);
 int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+			enum wb_reason reason);
 void bdi_start_background_writeback(struct backing_dev_info *bdi);
 int bdi_writeback_thread(void *data);
 int bdi_has_dirty_io(struct backing_dev_info *bdi);
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 5dbd705..4d4b59d 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -170,10 +170,9 @@
 };
 extern
 int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
-static inline int bcma_driver_register(struct bcma_driver *drv)
-{
-	return __bcma_driver_register(drv, THIS_MODULE);
-}
+#define bcma_driver_register(drv) \
+	__bcma_driver_register(drv, THIS_MODULE)
+
 extern void bcma_driver_unregister(struct bcma_driver *drv);
 
 struct bcma_bus {
diff --git a/include/linux/bio.h b/include/linux/bio.h
index ce33e68..847994a 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -211,8 +211,8 @@
 extern struct bio_set *bioset_create(unsigned int, unsigned int);
 extern void bioset_free(struct bio_set *);
 
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
 extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
 extern void bio_put(struct bio *);
 extern void bio_free(struct bio *, struct bio_set *);
@@ -269,14 +269,6 @@
 extern unsigned int bvec_nr_vecs(unsigned short idx);
 
 /*
- * Allow queuer to specify a completion CPU for this bio
- */
-static inline void bio_set_completion_cpu(struct bio *bio, unsigned int cpu)
-{
-	bio->bi_comp_cpu = cpu;
-}
-
-/*
  * bio_set is used to allow other portions of the IO system to
  * allocate their own private memory pools for bio and iovec structures.
  * These memory pools in turn all allocate from the bio_slab
@@ -527,7 +519,11 @@
 #define bioset_integrity_create(a, b)	(0)
 #define bio_integrity_prep(a)		(0)
 #define bio_integrity_enabled(a)	(0)
-#define bio_integrity_clone(a, b, c, d)	(0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+				      gfp_t gfp_mask, struct bio_set *bs)
+{
+	return 0;
+}
 #define bioset_integrity_free(a)	do { } while (0)
 #define bio_integrity_free(a, b)	do { } while (0)
 #define bio_integrity_endio(a, b)	do { } while (0)
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 71fc53b..4053cbd 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -59,8 +59,6 @@
 
 	unsigned int		bi_max_vecs;	/* max bvl_vecs we can hold */
 
-	unsigned int		bi_comp_cpu;	/* completion CPU */
-
 	atomic_t		bi_cnt;		/* pin count */
 
 	struct bio_vec		*bi_io_vec;	/* the actual vec list */
@@ -93,11 +91,10 @@
 #define BIO_BOUNCED	5	/* bio is a bounce bio */
 #define BIO_USER_MAPPED 6	/* contains user pages */
 #define BIO_EOPNOTSUPP	7	/* not supported */
-#define BIO_CPU_AFFINE	8	/* complete bio on same CPU as submitted */
-#define BIO_NULL_MAPPED 9	/* contains invalid user pages */
-#define BIO_FS_INTEGRITY 10	/* fs owns integrity data, not block layer */
-#define BIO_QUIET	11	/* Make BIO Quiet */
-#define BIO_MAPPED_INTEGRITY 12/* integrity metadata has been remapped */
+#define BIO_NULL_MAPPED 8	/* contains invalid user pages */
+#define BIO_FS_INTEGRITY 9	/* fs owns integrity data, not block layer */
+#define BIO_QUIET	10	/* Make BIO Quiet */
+#define BIO_MAPPED_INTEGRITY 11/* integrity metadata has been remapped */
 #define bio_flagged(bio, flag)	((bio)->bi_flags & (1 << (flag)))
 
 /*
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 7fbaa91..c7a6d3b 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -14,7 +14,6 @@
 #include <linux/wait.h>
 #include <linux/mempool.h>
 #include <linux/bio.h>
-#include <linux/module.h>
 #include <linux/stringify.h>
 #include <linux/gfp.h>
 #include <linux/bsg.h>
@@ -22,6 +21,7 @@
 
 #include <asm/scatterlist.h>
 
+struct module;
 struct scsi_ioctl_command;
 
 struct request_queue;
@@ -195,7 +195,7 @@
 #include <linux/elevator.h>
 
 typedef void (request_fn_proc) (struct request_queue *q);
-typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
+typedef void (make_request_fn) (struct request_queue *q, struct bio *bio);
 typedef int (prep_rq_fn) (struct request_queue *, struct request *);
 typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
 
@@ -680,6 +680,8 @@
 extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
 			 struct scsi_ioctl_command __user *);
 
+extern void blk_queue_bio(struct request_queue *q, struct bio *bio);
+
 /*
  * A queue has just exitted congestion.  Note this in the global counter of
  * congested queues, and wake up anyone who was waiting for requests to be
@@ -863,16 +865,22 @@
 extern void blk_put_queue(struct request_queue *);
 
 /*
- * Note: Code in between changing the blk_plug list/cb_list or element of such
- * lists is preemptable, but such code can't do sleep (or be very careful),
- * otherwise data is corrupted. For details, please check schedule() where
- * blk_schedule_flush_plug() is called.
+ * blk_plug permits building a queue of related requests by holding the I/O
+ * fragments for a short period. This allows merging of sequential requests
+ * into single larger request. As the requests are moved from a per-task list to
+ * the device's request_queue in a batch, this results in improved scalability
+ * as the lock contention for request_queue lock is reduced.
+ *
+ * It is ok not to disable preemption when adding the request to the plug list
+ * or when attempting a merge, because blk_schedule_flush_list() will only flush
+ * the plug list when the task sleeps by itself. For details, please see
+ * schedule() where blk_schedule_flush_plug() is called.
  */
 struct blk_plug {
-	unsigned long magic;
-	struct list_head list;
-	struct list_head cb_list;
-	unsigned int should_sort;
+	unsigned long magic; /* detect uninitialized use-cases */
+	struct list_head list; /* requests */
+	struct list_head cb_list; /* md requires an unplug callback */
+	unsigned int should_sort; /* list to be sorted before flushing? */
 };
 #define BLK_MAX_REQUEST_COUNT 16
 
@@ -1189,20 +1197,6 @@
 }
 #endif
 
-#ifdef CONFIG_BLK_DEV_THROTTLING
-extern int blk_throtl_init(struct request_queue *q);
-extern void blk_throtl_exit(struct request_queue *q);
-extern int blk_throtl_bio(struct request_queue *q, struct bio **bio);
-#else /* CONFIG_BLK_DEV_THROTTLING */
-static inline int blk_throtl_bio(struct request_queue *q, struct bio **bio)
-{
-	return 0;
-}
-
-static inline int blk_throtl_init(struct request_queue *q) { return 0; }
-static inline int blk_throtl_exit(struct request_queue *q) { return 0; }
-#endif /* CONFIG_BLK_DEV_THROTTLING */
-
 #define MODULE_ALIAS_BLOCKDEV(major,minor) \
 	MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
 #define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index f88eacb..7c05ac2 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -10,6 +10,12 @@
 #include "osdmap.h"
 #include "messenger.h"
 
+/* 
+ * Maximum object name size 
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) 
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
 struct ceph_msg;
 struct ceph_snap_context;
 struct ceph_osd_request;
@@ -75,7 +81,7 @@
 	struct inode *r_inode;         	      /* for use by callbacks */
 	void *r_priv;			      /* ditto */
 
-	char              r_oid[40];          /* object name */
+	char              r_oid[MAX_OBJ_NAME_SIZE];          /* object name */
 	int               r_oid_len;
 	unsigned long     r_stamp;            /* send OR check time */
 
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 139c4db..c86c940 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -156,6 +156,7 @@
  * @mult:		cycle to nanosecond multiplier
  * @shift:		cycle to nanosecond divisor (power of two)
  * @max_idle_ns:	max idle time permitted by the clocksource (nsecs)
+ * @maxadj		maximum adjustment value to mult (~11%)
  * @flags:		flags describing special properties
  * @archdata:		arch-specific data
  * @suspend:		suspend function for the clocksource, if necessary
@@ -172,7 +173,7 @@
 	u32 mult;
 	u32 shift;
 	u64 max_idle_ns;
-
+	u32 maxadj;
 #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
 	struct arch_clocksource_data archdata;
 #endif
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index b1a635a..6cb60fd 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -196,13 +196,9 @@
 #endif		/* CONFIG_HOTPLUG_CPU */
 
 #ifdef CONFIG_PM_SLEEP_SMP
-extern int suspend_cpu_hotplug;
-
 extern int disable_nonboot_cpus(void);
 extern void enable_nonboot_cpus(void);
 #else /* !CONFIG_PM_SLEEP_SMP */
-#define suspend_cpu_hotplug	0
-
 static inline int disable_nonboot_cpus(void) { return 0; }
 static inline void enable_nonboot_cpus(void) {}
 #endif /* !CONFIG_PM_SLEEP_SMP */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index b51629e..7408af8 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -13,7 +13,6 @@
 
 #include <linux/percpu.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/kobject.h>
 #include <linux/completion.h>
 
@@ -21,58 +20,65 @@
 #define CPUIDLE_NAME_LEN	16
 #define CPUIDLE_DESC_LEN	32
 
+struct module;
+
 struct cpuidle_device;
+struct cpuidle_driver;
 
 
 /****************************
  * CPUIDLE DEVICE INTERFACE *
  ****************************/
 
+struct cpuidle_state_usage {
+	void		*driver_data;
+
+	unsigned long long	usage;
+	unsigned long long	time; /* in US */
+};
+
 struct cpuidle_state {
 	char		name[CPUIDLE_NAME_LEN];
 	char		desc[CPUIDLE_DESC_LEN];
-	void		*driver_data;
 
 	unsigned int	flags;
 	unsigned int	exit_latency; /* in US */
 	unsigned int	power_usage; /* in mW */
 	unsigned int	target_residency; /* in US */
 
-	unsigned long long	usage;
-	unsigned long long	time; /* in US */
-
 	int (*enter)	(struct cpuidle_device *dev,
-			 struct cpuidle_state *state);
+			struct cpuidle_driver *drv,
+			int index);
 };
 
 /* Idle State Flags */
 #define CPUIDLE_FLAG_TIME_VALID	(0x01) /* is residency time measurable? */
-#define CPUIDLE_FLAG_IGNORE	(0x100) /* ignore during this idle period */
 
 #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
 
 /**
  * cpuidle_get_statedata - retrieves private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
  */
-static inline void * cpuidle_get_statedata(struct cpuidle_state *state)
+static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
 {
-	return state->driver_data;
+	return st_usage->driver_data;
 }
 
 /**
  * cpuidle_set_statedata - stores private driver state data
- * @state: the state
+ * @st_usage: the state usage statistics
  * @data: the private data
  */
 static inline void
-cpuidle_set_statedata(struct cpuidle_state *state, void *data)
+cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
 {
-	state->driver_data = data;
+	st_usage->driver_data = data;
 }
 
 struct cpuidle_state_kobj {
 	struct cpuidle_state *state;
+	struct cpuidle_state_usage *state_usage;
 	struct completion kobj_unregister;
 	struct kobject kobj;
 };
@@ -80,22 +86,17 @@
 struct cpuidle_device {
 	unsigned int		registered:1;
 	unsigned int		enabled:1;
-	unsigned int		power_specified:1;
 	unsigned int		cpu;
 
 	int			last_residency;
 	int			state_count;
-	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
+	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
 	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-	struct cpuidle_state	*last_state;
 
 	struct list_head 	device_list;
 	struct kobject		kobj;
 	struct completion	kobj_unregister;
 	void			*governor_data;
-	struct cpuidle_state	*safe_state;
-
-	int (*prepare)		(struct cpuidle_device *dev);
 };
 
 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
@@ -119,6 +120,11 @@
 struct cpuidle_driver {
 	char			name[CPUIDLE_NAME_LEN];
 	struct module 		*owner;
+
+	unsigned int		power_specified:1;
+	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
+	int			state_count;
+	int			safe_state_index;
 };
 
 #ifdef CONFIG_CPU_IDLE
@@ -165,11 +171,14 @@
 	struct list_head 	governor_list;
 	unsigned int		rating;
 
-	int  (*enable)		(struct cpuidle_device *dev);
-	void (*disable)		(struct cpuidle_device *dev);
+	int  (*enable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*disable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
 
-	int  (*select)		(struct cpuidle_device *dev);
-	void (*reflect)		(struct cpuidle_device *dev);
+	int  (*select)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*reflect)		(struct cpuidle_device *dev, int index);
 
 	struct module 		*owner;
 };
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index de9adec..8a94217 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -18,7 +18,6 @@
 #define _LINUX_CRYPTO_H
 
 #include <linux/atomic.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/slab.h>
@@ -510,11 +509,6 @@
 	return tfm->__crt_alg->cra_priority;
 }
 
-static inline const char *crypto_tfm_alg_modname(struct crypto_tfm *tfm)
-{
-	return module_name(tfm->__crt_alg->cra_module);
-}
-
 static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
 {
 	return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb9458..98ce812 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@
 	unsigned long total_time;
 	unsigned long busy_time;
 	unsigned long current_frequency;
-	void *private_date;
+	void *private_data;
 };
 
 /**
diff --git a/include/linux/device.h b/include/linux/device.h
index e88abee..3136ede 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -20,7 +20,7 @@
 #include <linux/lockdep.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
-#include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/pm.h>
 #include <linux/atomic.h>
 #include <asm/device.h>
@@ -29,6 +29,7 @@
 struct device_private;
 struct device_driver;
 struct driver_private;
+struct module;
 struct class;
 struct subsys_private;
 struct bus_type;
@@ -68,7 +69,7 @@
  * @resume:	Called to bring a device on this bus out of sleep mode.
  * @pm:		Power management operations of this bus, callback the specific
  *		device driver's pm-ops.
- * @iommu_ops   IOMMU specific operations for this bus, used to attach IOMMU
+ * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
  *              driver implementations to a bus and allow the driver to do
  *              bus-specific setup
  * @p:		The private data of the driver core, only the driver core can
@@ -681,6 +682,11 @@
 	return !!dev->power.async_suspend;
 }
 
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+	dev->power.ignore_children = enable;
+}
+
 static inline void device_lock(struct device *dev)
 {
 	mutex_lock(&dev->mutex);
@@ -723,10 +729,14 @@
  */
 extern struct device *__root_device_register(const char *name,
 					     struct module *owner);
-static inline struct device *root_device_register(const char *name)
-{
-	return __root_device_register(name, THIS_MODULE);
-}
+
+/*
+ * This is a macro to avoid include problems with THIS_MODULE,
+ * just as per what is done for device_schedule_callback() above.
+ */
+#define root_device_register(name) \
+	__root_device_register(name, THIS_MODULE)
+
 extern void root_device_unregister(struct device *root);
 
 static inline void *dev_get_platdata(const struct device *dev)
diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h
index 7aad1f4..8b64221 100644
--- a/include/linux/device_cgroup.h
+++ b/include/linux/device_cgroup.h
@@ -1,4 +1,3 @@
-#include <linux/module.h>
 #include <linux/fs.h>
 
 #ifdef CONFIG_CGROUP_DEVICE
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index be86ae1..e13117c 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -42,6 +42,9 @@
 	int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
 	int (*dma_supported)(struct device *dev, u64 mask);
 	int (*set_dma_mask)(struct device *dev, u64 mask);
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+	u64 (*get_required_mask)(struct device *dev);
+#endif
 	int is_phys;
 };
 
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fbf40e..75f53f8 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -24,8 +24,9 @@
 #include <linux/device.h>
 #include <linux/uio.h>
 #include <linux/dma-direction.h>
-
-struct scatterlist;
+#include <linux/scatterlist.h>
+#include <linux/bitmap.h>
+#include <asm/page.h>
 
 /**
  * typedef dma_cookie_t - an opaque DMA cookie
@@ -519,6 +520,16 @@
 			(unsigned long)config);
 }
 
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
+	struct dma_chan *chan, void *buf, size_t len,
+	enum dma_data_direction dir, unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_one(&sg, buf, len);
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
+}
+
 static inline int dmaengine_terminate_all(struct dma_chan *chan)
 {
 	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index d800d51..1d0f7a2 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -38,6 +38,12 @@
 	elevator_merged_fn *elevator_merged_fn;
 	elevator_merge_req_fn *elevator_merge_req_fn;
 	elevator_allow_merge_fn *elevator_allow_merge_fn;
+
+	/*
+	 * Used for both plugged list and elevator merging and in the
+	 * former case called without queue_lock.  Read comment on top of
+	 * attempt_plug_merge() for details.
+	 */
 	elevator_bio_merged_fn *elevator_bio_merged_fn;
 
 	elevator_dispatch_fn *elevator_dispatch_fn;
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 45f00b6..de33de1 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1097,10 +1097,12 @@
 #define SPEED_1000		1000
 #define SPEED_2500		2500
 #define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
 
 /* Duplex, half or full. */
 #define DUPLEX_HALF		0x00
 #define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
 
 /* Which connector port. */
 #define PORT_TP			0x00
diff --git a/include/linux/export.h b/include/linux/export.h
new file mode 100644
index 0000000..696c0f4
--- /dev/null
+++ b/include/linux/export.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_EXPORT_H
+#define _LINUX_EXPORT_H
+/*
+ * Export symbols from the kernel to modules.  Forked from module.h
+ * to reduce the amount of pointless cruft we feed to gcc when only
+ * exporting a simple symbol or two.
+ *
+ * If you feel the need to add #include <linux/foo.h> to this file
+ * then you are doing something wrong and should go away silently.
+ */
+
+/* Some toolchains use a `_' prefix for all user symbols. */
+#ifdef CONFIG_SYMBOL_PREFIX
+#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
+#else
+#define MODULE_SYMBOL_PREFIX ""
+#endif
+
+struct kernel_symbol
+{
+	unsigned long value;
+	const char *name;
+};
+
+#ifdef MODULE
+extern struct module __this_module;
+#define THIS_MODULE (&__this_module)
+#else
+#define THIS_MODULE ((struct module *)0)
+#endif
+
+#ifdef CONFIG_MODULES
+
+#ifndef __GENKSYMS__
+#ifdef CONFIG_MODVERSIONS
+/* Mark the CRC weak since genksyms apparently decides not to
+ * generate a checksums for some symbols */
+#define __CRC_SYMBOL(sym, sec)					\
+	extern void *__crc_##sym __attribute__((weak));		\
+	static const unsigned long __kcrctab_##sym		\
+	__used							\
+	__attribute__((section("___kcrctab" sec "+" #sym), unused))	\
+	= (unsigned long) &__crc_##sym;
+#else
+#define __CRC_SYMBOL(sym, sec)
+#endif
+
+/* For every exported symbol, place a struct in the __ksymtab section */
+#define __EXPORT_SYMBOL(sym, sec)				\
+	extern typeof(sym) sym;					\
+	__CRC_SYMBOL(sym, sec)					\
+	static const char __kstrtab_##sym[]			\
+	__attribute__((section("__ksymtab_strings"), aligned(1))) \
+	= MODULE_SYMBOL_PREFIX #sym;				\
+	static const struct kernel_symbol __ksymtab_##sym	\
+	__used							\
+	__attribute__((section("___ksymtab" sec "+" #sym), unused))	\
+	= { (unsigned long)&sym, __kstrtab_##sym }
+
+#define EXPORT_SYMBOL(sym)					\
+	__EXPORT_SYMBOL(sym, "")
+
+#define EXPORT_SYMBOL_GPL(sym)					\
+	__EXPORT_SYMBOL(sym, "_gpl")
+
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)				\
+	__EXPORT_SYMBOL(sym, "_gpl_future")
+
+#ifdef CONFIG_UNUSED_SYMBOLS
+#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
+#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
+#else
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+#endif
+
+#endif	/* __GENKSYMS__ */
+
+#else /* !CONFIG_MODULES... */
+
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+
+#endif /* CONFIG_MODULES */
+
+#endif /* _LINUX_EXPORT_H */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 21b3e75..1e7c011 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -1,7 +1,6 @@
 #ifndef _LINUX_FIRMWARE_H
 #define _LINUX_FIRMWARE_H
 
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/gfp.h>
@@ -15,6 +14,7 @@
 	struct page **pages;
 };
 
+struct module;
 struct device;
 
 struct builtin_fw {
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index a49b529..a5386e3 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -143,14 +143,9 @@
 #define wait_event_freezekillable(wq, condition)			\
 ({									\
 	int __retval;							\
-	do {								\
-		__retval = wait_event_killable(wq,			\
-				(condition) || freezing(current));	\
-		if (__retval && !freezing(current))			\
-			break;						\
-		else if (!(condition))					\
-			__retval = -ERESTARTSYS;			\
-	} while (try_to_freeze());					\
+	freezer_do_not_count();						\
+	__retval = wait_event_killable(wq, (condition));		\
+	freezer_count();						\
 	__retval;							\
 })
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0c4df26..e313022 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1886,6 +1886,7 @@
 extern struct dentry *mount_nodev(struct file_system_type *fs_type,
 	int flags, void *data,
 	int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
 void generic_shutdown_super(struct super_block *sb);
 void kill_block_super(struct super_block *sb);
 void kill_anon_super(struct super_block *sb);
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index f0c0e8a..26eafce 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -10,7 +10,6 @@
 #include <linux/kallsyms.h>
 #include <linux/linkage.h>
 #include <linux/bitops.h>
-#include <linux/module.h>
 #include <linux/ktime.h>
 #include <linux/sched.h>
 #include <linux/types.h>
@@ -19,6 +18,7 @@
 
 #include <asm/ftrace.h>
 
+struct module;
 struct ftrace_hash;
 
 #ifdef CONFIG_FUNCTION_TRACER
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index 069ee41..b456b08 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -71,10 +71,9 @@
 #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
 
 void __gameport_register_port(struct gameport *gameport, struct module *owner);
-static inline void gameport_register_port(struct gameport *gameport)
-{
-	__gameport_register_port(gameport, THIS_MODULE);
-}
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define gameport_register_port(gameport) \
+	__gameport_register_port(gameport, THIS_MODULE)
 
 void gameport_unregister_port(struct gameport *gameport);
 
@@ -145,12 +144,12 @@
 	mutex_unlock(&gameport->drv_mutex);
 }
 
-int __gameport_register_driver(struct gameport_driver *drv,
+int __must_check __gameport_register_driver(struct gameport_driver *drv,
 				struct module *owner, const char *mod_name);
-static inline int __must_check gameport_register_driver(struct gameport_driver *drv)
-{
-	return __gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define gameport_register_driver(drv) \
+	__gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
 
 void gameport_unregister_driver(struct gameport_driver *drv);
 
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 6957350..6d18f35 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -21,8 +21,6 @@
 #define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
 #define disk_to_dev(disk)	(&(disk)->part0.__dev)
 #define part_to_dev(part)	(&((part)->__dev))
-#define alias_name(disk)	((disk)->alias ? (disk)->alias : \
-						 (disk)->disk_name)
 
 extern struct device_type part_type;
 extern struct kobject *block_depr;
@@ -60,7 +58,6 @@
 
 #define DISK_MAX_PARTS			256
 #define DISK_NAME_LEN			32
-#define ALIAS_LEN			256
 
 #include <linux/major.h>
 #include <linux/device.h>
@@ -131,6 +128,7 @@
 #define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
 #define GENHD_FL_NATIVE_CAPACITY		128
 #define GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE	256
+#define GENHD_FL_NO_PART_SCAN			512
 
 enum {
 	DISK_EVENT_MEDIA_CHANGE			= 1 << 0, /* media changed */
@@ -165,7 +163,6 @@
                                          * disks that can't be partitioned. */
 
 	char disk_name[DISK_NAME_LEN];	/* name of major driver */
-	char *alias;			/* alias name of disk */
 	char *(*devnode)(struct gendisk *gd, mode_t *mode);
 
 	unsigned int events;		/* supported events */
@@ -238,9 +235,10 @@
 	return disk->minors;
 }
 
-static inline bool disk_partitionable(struct gendisk *disk)
+static inline bool disk_part_scan_enabled(struct gendisk *disk)
 {
-	return disk_max_parts(disk) > 1;
+	return disk_max_parts(disk) > 1 &&
+		!(disk->flags & GENHD_FL_NO_PART_SCAN);
 }
 
 static inline dev_t disk_devt(struct gendisk *disk)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index deed5f9..8ac51d6 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -72,6 +72,7 @@
 #include <linux/workqueue.h>
 #include <linux/input.h>
 #include <linux/semaphore.h>
+#include <linux/power_supply.h>
 
 /*
  * We parse each description item into this structure. Short items data
@@ -190,6 +191,7 @@
 #define HID_UP_UNDEFINED	0x00000000
 #define HID_UP_GENDESK		0x00010000
 #define HID_UP_SIMULATION	0x00020000
+#define HID_UP_GENDEVCTRLS	0x00060000
 #define HID_UP_KEYBOARD		0x00070000
 #define HID_UP_LED		0x00080000
 #define HID_UP_BUTTON		0x00090000
@@ -239,6 +241,8 @@
 #define HID_GD_RIGHT		0x00010092
 #define HID_GD_LEFT		0x00010093
 
+#define HID_DC_BATTERYSTRENGTH	0x00060020
+
 #define HID_DG_DIGITIZER	0x000d0001
 #define HID_DG_PEN		0x000d0002
 #define HID_DG_LIGHTPEN		0x000d0003
@@ -482,6 +486,18 @@
 	struct hid_driver *driver;
 	struct hid_ll_driver *ll_driver;
 
+#ifdef CONFIG_HID_BATTERY_STRENGTH
+	/*
+	 * Power supply information for HID devices which report
+	 * battery strength. power_supply is registered iff
+	 * battery.name is non-NULL.
+	 */
+	struct power_supply battery;
+	__s32 battery_min;
+	__s32 battery_max;
+	__s32 battery_val;
+#endif
+
 	unsigned int status;						/* see STAT flags above */
 	unsigned claimed;						/* Claimed by hidinput, hiddev? */
 	unsigned quirks;						/* Various quirks the device can pull on us */
@@ -697,10 +713,11 @@
 
 extern int __must_check __hid_register_driver(struct hid_driver *,
 		struct module *, const char *mod_name);
-static inline int __must_check hid_register_driver(struct hid_driver *driver)
-{
-	return __hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define hid_register_driver(driver) \
+	__hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
 extern void hid_unregister_driver(struct hid_driver *);
 
 extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
@@ -711,6 +728,8 @@
 int hid_set_field(struct hid_field *, unsigned, __s32);
 int hid_input_report(struct hid_device *, int type, u8 *, int, int);
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
+struct hid_field *hidinput_get_led_field(struct hid_device *hid);
+unsigned int hidinput_count_leds(struct hid_device *hid);
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 19644e0..d9d6c86 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -110,11 +110,6 @@
 
 #define hugetlb_change_protection(vma, address, end, newprot)
 
-#ifndef HPAGE_MASK
-#define HPAGE_MASK	PAGE_MASK		/* Keep the compiler happy */
-#define HPAGE_SIZE	PAGE_SIZE
-#endif
-
 #endif /* !CONFIG_HUGETLB_PAGE */
 
 #define HUGETLB_ANON_FILE "anon_hugepage"
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 8390efc..aad6bd4 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -20,17 +20,49 @@
 
 #include <linux/err.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 
 /* hwspinlock mode argument */
 #define HWLOCK_IRQSTATE	0x01	/* Disable interrupts, save state */
 #define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */
 
 struct hwspinlock;
+struct hwspinlock_device;
+struct hwspinlock_ops;
+
+/**
+ * struct hwspinlock_pdata - platform data for hwspinlock drivers
+ * @base_id: base id for this hwspinlock device
+ *
+ * hwspinlock devices provide system-wide hardware locks that are used
+ * by remote processors that have no other way to achieve synchronization.
+ *
+ * To achieve that, each physical lock must have a system-wide id number
+ * that is agreed upon, otherwise remote processors can't possibly assume
+ * they're using the same hardware lock.
+ *
+ * Usually boards have a single hwspinlock device, which provides several
+ * hwspinlocks, and in this case, they can be trivially numbered 0 to
+ * (num-of-locks - 1).
+ *
+ * In case boards have several hwspinlocks devices, a different base id
+ * should be used for each hwspinlock device (they can't all use 0 as
+ * a starting id!).
+ *
+ * This platform data structure should be used to provide the base id
+ * for each device (which is trivially 0 when only a single hwspinlock
+ * device exists). It can be shared between different platforms, hence
+ * its location.
+ */
+struct hwspinlock_pdata {
+	int base_id;
+};
 
 #if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
 
-int hwspin_lock_register(struct hwspinlock *lock);
-struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+		const struct hwspinlock_ops *ops, int base_id, int num_locks);
+int hwspin_lock_unregister(struct hwspinlock_device *bank);
 struct hwspinlock *hwspin_lock_request(void);
 struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
 int hwspin_lock_free(struct hwspinlock *hwlock);
@@ -86,7 +118,6 @@
 static inline
 void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 {
-	return 0;
 }
 
 static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
@@ -94,16 +125,6 @@
 	return 0;
 }
 
-static inline int hwspin_lock_register(struct hwspinlock *hwlock)
-{
-	return -ENODEV;
-}
-
-static inline struct hwspinlock *hwspin_lock_unregister(unsigned int id)
-{
-	return NULL;
-}
-
 #endif /* !CONFIG_HWSPINLOCK */
 
 /**
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 38a21c3..07d103a 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -28,7 +28,6 @@
 
 #include <linux/types.h>
 #ifdef __KERNEL__
-#include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/device.h>	/* for struct device */
 #include <linux/sched.h>	/* for completion */
@@ -49,6 +48,8 @@
 union i2c_smbus_data;
 struct i2c_board_info;
 
+struct module;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /*
  * The master routines are the ones normally used to transmit data to devices
@@ -431,9 +432,6 @@
 /* Internal numbers to terminate lists */
 #define I2C_CLIENT_END		0xfffeU
 
-/* The numbers to use to set I2C bus address */
-#define ANY_I2C_BUS		0xffff
-
 /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
 #define I2C_ADDRS(addr, addrs...) \
 	((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
@@ -451,10 +449,9 @@
 extern int i2c_register_driver(struct module *, struct i2c_driver *);
 extern void i2c_del_driver(struct i2c_driver *);
 
-static inline int i2c_add_driver(struct i2c_driver *driver)
-{
-	return i2c_register_driver(THIS_MODULE, driver);
-}
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define i2c_add_driver(driver) \
+	i2c_register_driver(THIS_MODULE, driver)
 
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
index 6427d29..530e11b 100644
--- a/include/linux/i2c/twl4030-madc.h
+++ b/include/linux/i2c/twl4030-madc.h
@@ -129,6 +129,10 @@
 #define REG_BCICTL2             0x024
 #define TWL4030_BCI_ITHSENS	0x007
 
+/* Register and bits for GPBR1 register */
+#define TWL4030_REG_GPBR1		0x0c
+#define TWL4030_GPBR1_MADC_HFCLK_EN	(1 << 7)
+
 struct twl4030_madc_user_parms {
 	int channel;
 	int average;
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index 80b480c..abf5028 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -98,9 +98,10 @@
 	INET_DIAG_VEGASINFO,
 	INET_DIAG_CONG,
 	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
 };
 
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
 
 
 /* INET_DIAG_MEM */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 08ffab0..94b1e35 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -184,7 +184,6 @@
 		[PIDTYPE_SID]  = INIT_PID_LINK(PIDTYPE_SID),		\
 	},								\
 	.thread_group	= LIST_HEAD_INIT(tsk.thread_group),		\
-	.dirties = INIT_PROP_LOCAL_SINGLE(dirties),			\
 	INIT_IDS							\
 	INIT_PERF_EVENTS(tsk)						\
 	INIT_TRACE_IRQFLAGS						\
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index ca85cf8..bbd156b 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -220,10 +220,11 @@
  * The in-kernel interface.
  */
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
 
+struct module;
+
 /* Opaque type for a IPMI message user.  One of these is needed to
    send and receive messages. */
 typedef struct ipmi_user *ipmi_user_t;
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index 204f9cd..3ef0d8b 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -36,7 +36,6 @@
 
 #include <linux/ipmi_msgdefs.h>
 #include <linux/proc_fs.h>
-#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/ipmi.h>
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 59e49c8..bff29c5 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -23,13 +23,13 @@
 #include <linux/errno.h>
 #include <linux/topology.h>
 #include <linux/wait.h>
-#include <linux/module.h>
 
 #include <asm/irq.h>
 #include <asm/ptrace.h>
 #include <asm/irq_regs.h>
 
 struct seq_file;
+struct module;
 struct irq_desc;
 struct irq_data;
 typedef	void (*irq_flow_handler_t)(unsigned int irq,
@@ -567,30 +567,22 @@
 int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
 		struct module *owner);
 
-static inline int irq_alloc_descs(int irq, unsigned int from, unsigned int cnt,
-		int node)
-{
-	return __irq_alloc_descs(irq, from, cnt, node, THIS_MODULE);
-}
+/* use macros to avoid needing export.h for THIS_MODULE */
+#define irq_alloc_descs(irq, from, cnt, node)	\
+	__irq_alloc_descs(irq, from, cnt, node, THIS_MODULE)
+
+#define irq_alloc_desc(node)			\
+	irq_alloc_descs(-1, 0, 1, node)
+
+#define irq_alloc_desc_at(at, node)		\
+	irq_alloc_descs(at, at, 1, node)
+
+#define irq_alloc_desc_from(from, node)		\
+	irq_alloc_descs(-1, from, 1, node)
 
 void irq_free_descs(unsigned int irq, unsigned int cnt);
 int irq_reserve_irqs(unsigned int from, unsigned int cnt);
 
-static inline int irq_alloc_desc(int node)
-{
-	return irq_alloc_descs(-1, 0, 1, node);
-}
-
-static inline int irq_alloc_desc_at(unsigned int at, int node)
-{
-	return irq_alloc_descs(at, at, 1, node);
-}
-
-static inline int irq_alloc_desc_from(unsigned int from, int node)
-{
-	return irq_alloc_descs(-1, from, 1, node);
-}
-
 static inline void irq_free_desc(unsigned int irq)
 {
 	irq_free_descs(irq, 1);
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 6b69c2c..f1e2527 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -11,6 +11,7 @@
 struct irq_affinity_notify;
 struct proc_dir_entry;
 struct timer_rand_state;
+struct module;
 /**
  * struct irq_desc - interrupt descriptor
  * @irq_data:		per irq and chip data passed down to chip functions
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index 66f23dc..388b0d4 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -16,7 +16,7 @@
 
 # include <asm/jump_label.h>
 # define HAVE_JUMP_LABEL
-#endif
+#endif	/* CC_HAVE_ASM_GOTO && CONFIG_JUMP_LABEL */
 
 enum jump_label_type {
 	JUMP_LABEL_DISABLE = 0,
@@ -28,9 +28,9 @@
 #ifdef HAVE_JUMP_LABEL
 
 #ifdef CONFIG_MODULES
-#define JUMP_LABEL_INIT {{ 0 }, NULL, NULL}
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL, NULL}
 #else
-#define JUMP_LABEL_INIT {{ 0 }, NULL}
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL}
 #endif
 
 static __always_inline bool static_branch(struct jump_label_key *key)
@@ -41,18 +41,20 @@
 extern struct jump_entry __start___jump_table[];
 extern struct jump_entry __stop___jump_table[];
 
+extern void jump_label_init(void);
 extern void jump_label_lock(void);
 extern void jump_label_unlock(void);
 extern void arch_jump_label_transform(struct jump_entry *entry,
-				 enum jump_label_type type);
-extern void arch_jump_label_text_poke_early(jump_label_t addr);
+				      enum jump_label_type type);
+extern void arch_jump_label_transform_static(struct jump_entry *entry,
+					     enum jump_label_type type);
 extern int jump_label_text_reserved(void *start, void *end);
 extern void jump_label_inc(struct jump_label_key *key);
 extern void jump_label_dec(struct jump_label_key *key);
 extern bool jump_label_enabled(struct jump_label_key *key);
 extern void jump_label_apply_nops(struct module *mod);
 
-#else
+#else  /* !HAVE_JUMP_LABEL */
 
 #include <linux/atomic.h>
 
@@ -62,6 +64,10 @@
 	atomic_t enabled;
 };
 
+static __always_inline void jump_label_init(void)
+{
+}
+
 static __always_inline bool static_branch(struct jump_label_key *key)
 {
 	if (unlikely(atomic_read(&key->enabled)))
@@ -96,7 +102,6 @@
 {
 	return 0;
 }
+#endif	/* HAVE_JUMP_LABEL */
 
-#endif
-
-#endif
+#endif	/* _LINUX_JUMP_LABEL_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 4c0d3b2..e8b1597 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -371,6 +371,7 @@
 #define TAINT_WARN			9
 #define TAINT_CRAP			10
 #define TAINT_FIRMWARE_WORKAROUND	11
+#define TAINT_OOT_MODULE		12
 
 extern const char hex_asc[];
 #define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index f47fcd3..c3892fc 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -555,7 +555,6 @@
 #define KVM_CAP_PPC_SMT 64
 #define KVM_CAP_PPC_RMA	65
 #define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
 #define KVM_CAP_PPC_PAPR 68
 #define KVM_CAP_S390_GMAP 71
 
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 683d698..11a41a8 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -73,8 +73,8 @@
  */
 enum {
 	LO_FLAGS_READ_ONLY	= 1,
-	LO_FLAGS_USE_AOPS	= 2,
 	LO_FLAGS_AUTOCLEAR	= 4,
+	LO_FLAGS_PARTSCAN	= 8,
 };
 
 #include <asm/posix_types.h>	/* for __kernel_old_dev_t */
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
index 8ea9a42..0fe00cd 100644
--- a/include/linux/mdio-bitbang.h
+++ b/include/linux/mdio-bitbang.h
@@ -2,7 +2,8 @@
 #define __LINUX_MDIO_BITBANG_H
 
 #include <linux/phy.h>
-#include <linux/module.h>
+
+struct module;
 
 struct mdiobb_ctrl;
 
diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h
new file mode 100644
index 0000000..a720051
--- /dev/null
+++ b/include/linux/mfd/ab5500/ab5500.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) ST-Ericsson 2011
+ *
+ * License Terms: GNU General Public License v2
+ */
+#ifndef MFD_AB5500_H
+#define MFD_AB5500_H
+
+#include <linux/device.h>
+
+enum ab5500_devid {
+	AB5500_DEVID_ADC,
+	AB5500_DEVID_LEDS,
+	AB5500_DEVID_POWER,
+	AB5500_DEVID_REGULATORS,
+	AB5500_DEVID_SIM,
+	AB5500_DEVID_RTC,
+	AB5500_DEVID_CHARGER,
+	AB5500_DEVID_FUELGAUGE,
+	AB5500_DEVID_VIBRATOR,
+	AB5500_DEVID_CODEC,
+	AB5500_DEVID_USB,
+	AB5500_DEVID_OTP,
+	AB5500_DEVID_VIDEO,
+	AB5500_DEVID_DBIECI,
+	AB5500_DEVID_ONSWA,
+	AB5500_NUM_DEVICES,
+};
+
+enum ab5500_banks {
+	AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
+	AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
+	AB5500_BANK_VDENC = 2,
+	AB5500_BANK_SIM_USBSIM  = 3,
+	AB5500_BANK_LED = 4,
+	AB5500_BANK_ADC  = 5,
+	AB5500_BANK_RTC  = 6,
+	AB5500_BANK_STARTUP  = 7,
+	AB5500_BANK_DBI_ECI  = 8,
+	AB5500_BANK_CHG  = 9,
+	AB5500_BANK_FG_BATTCOM_ACC = 10,
+	AB5500_BANK_USB = 11,
+	AB5500_BANK_IT = 12,
+	AB5500_BANK_VIBRA = 13,
+	AB5500_BANK_AUDIO_HEADSETUSB = 14,
+	AB5500_NUM_BANKS = 15,
+};
+
+enum ab5500_banks_addr {
+	AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
+	AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
+	AB5500_ADDR_VDENC = 0x06,
+	AB5500_ADDR_SIM_USBSIM  = 0x04,
+	AB5500_ADDR_LED = 0x10,
+	AB5500_ADDR_ADC  = 0x0A,
+	AB5500_ADDR_RTC  = 0x0F,
+	AB5500_ADDR_STARTUP  = 0x03,
+	AB5500_ADDR_DBI_ECI  = 0x07,
+	AB5500_ADDR_CHG  = 0x0B,
+	AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
+	AB5500_ADDR_USB = 0x05,
+	AB5500_ADDR_IT = 0x0E,
+	AB5500_ADDR_VIBRA = 0x02,
+	AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
+};
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB5500_IT_SOURCE0_REG		0x20
+#define AB5500_IT_SOURCE1_REG		0x21
+#define AB5500_IT_SOURCE2_REG		0x22
+#define AB5500_IT_SOURCE3_REG		0x23
+#define AB5500_IT_SOURCE4_REG		0x24
+#define AB5500_IT_SOURCE5_REG		0x25
+#define AB5500_IT_SOURCE6_REG		0x26
+#define AB5500_IT_SOURCE7_REG		0x27
+#define AB5500_IT_SOURCE8_REG		0x28
+#define AB5500_IT_SOURCE9_REG		0x29
+#define AB5500_IT_SOURCE10_REG		0x2A
+#define AB5500_IT_SOURCE11_REG		0x2B
+#define AB5500_IT_SOURCE12_REG		0x2C
+#define AB5500_IT_SOURCE13_REG		0x2D
+#define AB5500_IT_SOURCE14_REG		0x2E
+#define AB5500_IT_SOURCE15_REG		0x2F
+#define AB5500_IT_SOURCE16_REG		0x30
+#define AB5500_IT_SOURCE17_REG		0x31
+#define AB5500_IT_SOURCE18_REG		0x32
+#define AB5500_IT_SOURCE19_REG		0x33
+#define AB5500_IT_SOURCE20_REG		0x34
+#define AB5500_IT_SOURCE21_REG		0x35
+#define AB5500_IT_SOURCE22_REG		0x36
+#define AB5500_IT_SOURCE23_REG		0x37
+
+#define AB5500_NUM_IRQ_REGS		23
+
+/**
+ * struct ab5500
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @dev: a pointer to the device struct for this chip driver
+ * @ab5500_irq: the analog baseband irq
+ * @irq_base: the platform configuration irq base for subdevices
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @irq_lock: a lock to protect the mask
+ * @abb_events: a local bit mask of the prcmu wakeup events
+ * @event_mask: a local copy of the mask event registers
+ * @last_event_mask: a copy of the last event_mask written to hardware
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab5500 {
+	struct mutex access_mutex;
+	struct device *dev;
+	unsigned int ab5500_irq;
+	unsigned int irq_base;
+	char chip_name[32];
+	u8 chip_id;
+	struct mutex irq_lock;
+	u32 abb_events;
+	u8 mask[AB5500_NUM_IRQ_REGS];
+	u8 oldmask[AB5500_NUM_IRQ_REGS];
+	u8 startup_events[AB5500_NUM_IRQ_REGS];
+	bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+	unsigned int debug_bank;
+	unsigned int debug_address;
+#endif
+};
+
+struct ab5500_platform_data {
+	struct {unsigned int base; unsigned int count; } irq;
+	void *dev_data[AB5500_NUM_DEVICES];
+	struct abx500_init_settings *init_settings;
+	unsigned int init_settings_sz;
+	bool pm_power_off;
+};
+
+#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h
index 46b9540..2529667 100644
--- a/include/linux/mfd/ab8500/gpadc.h
+++ b/include/linux/mfd/ab8500/gpadc.h
@@ -27,6 +27,9 @@
 struct ab8500_gpadc;
 
 struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input);
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+    u8 channel, int ad_value);
 
 #endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 896b5e4..9970337 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,7 +6,7 @@
  *
  * ABX500 core access functions.
  * The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500, and ab8500.
+ * ab3100, ab5500, and ab8500.
  *
  * Author: Mattias Wallin <mattias.wallin@stericsson.com>
  * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
@@ -29,17 +29,16 @@
 #define AB3100_P1G	0xc6
 #define AB3100_R2A	0xc7
 #define AB3100_R2B	0xc8
-#define AB3550_P1A	0x10
 #define AB5500_1_0	0x20
-#define AB5500_2_0	0x21
-#define AB5500_2_1	0x22
+#define AB5500_1_1	0x21
+#define AB5500_2_0	0x24
 
 /* AB8500 CIDs*/
-#define AB8500_CUTEARLY	0x00
 #define AB8500_CUT1P0	0x10
 #define AB8500_CUT1P1	0x11
 #define AB8500_CUT2P0	0x20
 #define AB8500_CUT3P0	0x30
+#define AB8500_CUT3P3	0x33
 
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
@@ -143,39 +142,6 @@
 int ab3100_event_unregister(struct ab3100 *ab3100,
 			    struct notifier_block *nb);
 
-/* AB3550, STR register flags */
-#define AB3550_STR_ONSWA				(0x01)
-#define AB3550_STR_ONSWB				(0x02)
-#define AB3550_STR_ONSWC				(0x04)
-#define AB3550_STR_DCIO					(0x08)
-#define AB3550_STR_BOOT_MODE				(0x10)
-#define AB3550_STR_SIM_OFF				(0x20)
-#define AB3550_STR_BATT_REMOVAL				(0x40)
-#define AB3550_STR_VBUS					(0x80)
-
-/* Interrupt mask registers */
-#define AB3550_IMR1 0x29
-#define AB3550_IMR2 0x2a
-#define AB3550_IMR3 0x2b
-#define AB3550_IMR4 0x2c
-#define AB3550_IMR5 0x2d
-
-enum ab3550_devid {
-	AB3550_DEVID_ADC,
-	AB3550_DEVID_DAC,
-	AB3550_DEVID_LEDS,
-	AB3550_DEVID_POWER,
-	AB3550_DEVID_REGULATORS,
-	AB3550_DEVID_SIM,
-	AB3550_DEVID_UART,
-	AB3550_DEVID_RTC,
-	AB3550_DEVID_CHARGER,
-	AB3550_DEVID_FUELGAUGE,
-	AB3550_DEVID_VIBRATOR,
-	AB3550_DEVID_CODEC,
-	AB3550_NUM_DEVICES,
-};
-
 /**
  * struct abx500_init_setting
  * Initial value of the registers for driver to use during setup.
@@ -186,18 +152,6 @@
 	u8 setting;
 };
 
-/**
- * struct ab3550_platform_data
- * Data supplied to initialize board connections to the AB3550
- */
-struct ab3550_platform_data {
-	struct {unsigned int base; unsigned int count; } irq;
-	void *dev_data[AB3550_NUM_DEVICES];
-	size_t dev_data_sz[AB3550_NUM_DEVICES];
-	struct abx500_init_settings *init_settings;
-	unsigned int init_settings_sz;
-};
-
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);
 int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index f097798..9890687 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -5,21 +5,35 @@
  *
  * U5500 PRCMU API.
  */
-#ifndef __MACH_PRCMU_U5500_H
-#define __MACH_PRCMU_U5500_H
+#ifndef __MFD_DB5500_PRCMU_H
+#define __MFD_DB5500_PRCMU_H
 
-#ifdef CONFIG_UX500_SOC_DB5500
+#ifdef CONFIG_MFD_DB5500_PRCMU
 
 void db5500_prcmu_early_init(void);
-
+int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
 int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+void db5500_prcmu_enable_wakeups(u32 wakeups);
+int db5500_prcmu_request_clock(u8 clock, bool enable);
+void db5500_prcmu_config_abb_event_readout(u32 abb_events);
+void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int prcmu_resetout(u8 resoutn, u8 state);
+int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll);
+int db5500_prcmu_config_esram0_deep_sleep(u8 state);
+void db5500_prcmu_system_reset(u16 reset_code);
+u16 db5500_prcmu_get_reset_code(void);
+bool db5500_prcmu_is_ac_wake_requested(void);
+int db5500_prcmu_set_arm_opp(u8 opp);
+int db5500_prcmu_get_arm_opp(void);
 
 #else /* !CONFIG_UX500_SOC_DB5500 */
 
-static inline void db5500_prcmu_early_init(void)
-{
-}
+static inline void db5500_prcmu_early_init(void) {}
 
 static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 {
@@ -31,15 +45,75 @@
 	return -ENOSYS;
 }
 
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events)
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
 {
-#ifdef CONFIG_MACH_U5500_SIMULATOR
 	return 0;
-#else
-	return -1;
-#endif
 }
 
-#endif /* __MACH_PRCMU_U5500_H */
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int prcmu_resetout(u8 resoutn, u8 state)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 db5500_prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
+
+#endif /* CONFIG_MFD_DB5500_PRCMU */
+
+#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 917dbcab..60d27f7 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,7 +11,6 @@
 #define __MFD_DB8500_PRCMU_H
 
 #include <linux/interrupt.h>
-#include <linux/notifier.h>
 
 /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
 
@@ -133,7 +132,7 @@
  * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
  */
 enum ap_pwrst_trans {
-	NO_TRANSITION			= 0x00,
+	PRCMU_AP_NO_CHANGE		= 0x00,
 	APEXECUTE_TO_APSLEEP		= 0x01,
 	APIDLE_TO_APSLEEP		= 0x02, /* To be removed */
 	PRCMU_AP_SLEEP			= 0x01,
@@ -146,54 +145,6 @@
 };
 
 /**
- * enum ddr_pwrst - DDR power states definition
- * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
- * @DDR_PWR_STATE_ON:
- * @DDR_PWR_STATE_OFFLOWLAT:
- * @DDR_PWR_STATE_OFFHIGHLAT:
- */
-enum ddr_pwrst {
-	DDR_PWR_STATE_UNCHANGED     = 0x00,
-	DDR_PWR_STATE_ON            = 0x01,
-	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
-	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
-};
-
-/**
- * enum arm_opp - ARM OPP states definition
- * @ARM_OPP_INIT:
- * @ARM_NO_CHANGE: The ARM operating point is unchanged
- * @ARM_100_OPP: The new ARM operating point is arm100opp
- * @ARM_50_OPP: The new ARM operating point is arm50opp
- * @ARM_MAX_OPP: Operating point is "max" (more than 100)
- * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
- * @ARM_EXTCLK: The new ARM operating point is armExtClk
- */
-enum arm_opp {
-	ARM_OPP_INIT = 0x00,
-	ARM_NO_CHANGE = 0x01,
-	ARM_100_OPP = 0x02,
-	ARM_50_OPP = 0x03,
-	ARM_MAX_OPP = 0x04,
-	ARM_MAX_FREQ100OPP = 0x05,
-	ARM_EXTCLK = 0x07
-};
-
-/**
- * enum ape_opp - APE OPP states definition
- * @APE_OPP_INIT:
- * @APE_NO_CHANGE: The APE operating point is unchanged
- * @APE_100_OPP: The new APE operating point is ape100opp
- * @APE_50_OPP: 50%
- */
-enum ape_opp {
-	APE_OPP_INIT = 0x00,
-	APE_NO_CHANGE = 0x01,
-	APE_100_OPP = 0x02,
-	APE_50_OPP = 0x03
-};
-
-/**
  * enum hw_acc_state - State definition for hardware accelerator
  * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
  * @HW_OFF: The hardware accelerator must be switched off
@@ -469,26 +420,6 @@
 
 /* End of file previously known as prcmu-fw-defs_v1.h */
 
-/* PRCMU Wakeup defines */
-enum prcmu_wakeup_index {
-	PRCMU_WAKEUP_INDEX_RTC,
-	PRCMU_WAKEUP_INDEX_RTT0,
-	PRCMU_WAKEUP_INDEX_RTT1,
-	PRCMU_WAKEUP_INDEX_HSI0,
-	PRCMU_WAKEUP_INDEX_HSI1,
-	PRCMU_WAKEUP_INDEX_USB,
-	PRCMU_WAKEUP_INDEX_ABB,
-	PRCMU_WAKEUP_INDEX_ABB_FIFO,
-	PRCMU_WAKEUP_INDEX_ARM,
-	NUM_PRCMU_WAKEUP_INDICES
-};
-#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
-
-/* PRCMU QoS APE OPP class */
-#define PRCMU_QOS_APE_OPP 1
-#define PRCMU_QOS_DDR_OPP 2
-#define PRCMU_QOS_DEFAULT_VALUE -1
-
 /**
  * enum hw_acc_dev - enum for hw accelerators
  * @HW_ACC_SVAMMDSP: for SVAMMDSP
@@ -527,64 +458,6 @@
 };
 
 /*
- * Ids for all EPODs (power domains)
- * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
- * - EPOD_ID_SVAPIPE: power domain for SVA pipe
- * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
- * - EPOD_ID_SIAPIPE: power domain for SIA pipe
- * - EPOD_ID_SGA: power domain for SGA
- * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
- * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
- * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
- * - NUM_EPOD_ID: number of power domains
- */
-#define EPOD_ID_SVAMMDSP	0
-#define EPOD_ID_SVAPIPE		1
-#define EPOD_ID_SIAMMDSP	2
-#define EPOD_ID_SIAPIPE		3
-#define EPOD_ID_SGA		4
-#define EPOD_ID_B2R2_MCDE	5
-#define EPOD_ID_ESRAM12		6
-#define EPOD_ID_ESRAM34		7
-#define NUM_EPOD_ID		8
-
-/*
- * state definition for EPOD (power domain)
- * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
- * - EPOD_STATE_OFF: The EPOD is switched off
- * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
- *                         retention
- * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
- * - EPOD_STATE_ON: Same as above, but with clock enabled
- */
-#define EPOD_STATE_NO_CHANGE	0x00
-#define EPOD_STATE_OFF		0x01
-#define EPOD_STATE_RAMRET	0x02
-#define EPOD_STATE_ON_CLK_OFF	0x03
-#define EPOD_STATE_ON		0x04
-
-/*
- * CLKOUT sources
- */
-#define PRCMU_CLKSRC_CLK38M		0x00
-#define PRCMU_CLKSRC_ACLK		0x01
-#define PRCMU_CLKSRC_SYSCLK		0x02
-#define PRCMU_CLKSRC_LCDCLK		0x03
-#define PRCMU_CLKSRC_SDMMCCLK		0x04
-#define PRCMU_CLKSRC_TVCLK		0x05
-#define PRCMU_CLKSRC_TIMCLK		0x06
-#define PRCMU_CLKSRC_CLK009		0x07
-/* These are only valid for CLKOUT1: */
-#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
-#define PRCMU_CLKSRC_I2CCLK		0x41
-#define PRCMU_CLKSRC_MSP02CLK		0x42
-#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
-#define PRCMU_CLKSRC_HSIRXCLK		0x44
-#define PRCMU_CLKSRC_HSITXCLK		0x45
-#define PRCMU_CLKSRC_ARMCLKFIX		0x46
-#define PRCMU_CLKSRC_HDMICLK		0x47
-
-/*
  * Definitions for autonomous power management configuration.
  */
 
@@ -620,88 +493,12 @@
 	u8 sva_policy;
 };
 
-/**
- * enum ddr_opp - DDR OPP states definition
- * @DDR_100_OPP: The new DDR operating point is ddr100opp
- * @DDR_50_OPP: The new DDR operating point is ddr50opp
- * @DDR_25_OPP: The new DDR operating point is ddr25opp
- */
-enum ddr_opp {
-	DDR_100_OPP = 0x00,
-	DDR_50_OPP = 0x01,
-	DDR_25_OPP = 0x02,
-};
-
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
-	PRCMU_SGACLK,
-	PRCMU_UARTCLK,
-	PRCMU_MSP02CLK,
-	PRCMU_MSP1CLK,
-	PRCMU_I2CCLK,
-	PRCMU_SDMMCCLK,
-	PRCMU_SLIMCLK,
-	PRCMU_PER1CLK,
-	PRCMU_PER2CLK,
-	PRCMU_PER3CLK,
-	PRCMU_PER5CLK,
-	PRCMU_PER6CLK,
-	PRCMU_PER7CLK,
-	PRCMU_LCDCLK,
-	PRCMU_BMLCLK,
-	PRCMU_HSITXCLK,
-	PRCMU_HSIRXCLK,
-	PRCMU_HDMICLK,
-	PRCMU_APEATCLK,
-	PRCMU_APETRACECLK,
-	PRCMU_MCDECLK,
-	PRCMU_IPI2CCLK,
-	PRCMU_DSIALTCLK,
-	PRCMU_DMACLK,
-	PRCMU_B2R2CLK,
-	PRCMU_TVCLK,
-	PRCMU_SSPCLK,
-	PRCMU_RNGCLK,
-	PRCMU_UICCCLK,
-	PRCMU_NUM_REG_CLOCKS,
-	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
-	PRCMU_TIMCLK,
-};
-
-/*
- * Definitions for controlling ESRAM0 in deep sleep.
- */
-#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
-#define ESRAM0_DEEP_SLEEP_STATE_RET 2
-
-#ifdef CONFIG_MFD_DB8500_PRCMU
-void __init prcmu_early_init(void);
-int prcmu_set_display_clocks(void);
-int prcmu_disable_dsipll(void);
-int prcmu_enable_dsipll(void);
-#else
-static inline void __init prcmu_early_init(void) {}
-#endif
-
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
+void db8500_prcmu_early_init(void);
 int prcmu_set_rc_a2p(enum romcode_write);
 enum romcode_read prcmu_get_rc_p2a(void);
 enum ap_pwrst prcmu_get_xp70_current_state(void);
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
-
-void prcmu_enable_wakeups(u32 wakeups);
-static inline void prcmu_disable_wakeups(void)
-{
-	prcmu_enable_wakeups(0);
-}
-
-void prcmu_config_abb_event_readout(u32 abb_events);
-void prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_set_arm_opp(u8 opp);
-int prcmu_get_arm_opp(void);
 bool prcmu_has_arm_maxopp(void);
 bool prcmu_is_u8400(void);
 int prcmu_set_ape_opp(u8 opp);
@@ -710,19 +507,14 @@
 int prcmu_release_usb_wakeup_state(void);
 int prcmu_set_ddr_opp(u8 opp);
 int prcmu_get_ddr_opp(void);
-unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
-void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
 /* NOTE! Use regulator framework instead */
 int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
-int prcmu_set_epod(u16 epod_id, u8 epod_state);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle);
 bool prcmu_is_auto_pm_enabled(void);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-int prcmu_request_clock(u8 clock, bool enable);
 int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_esram0_deep_sleep(u8 state);
 int prcmu_config_hotdog(u8 threshold);
 int prcmu_config_hotmon(u8 low, u8 high);
 int prcmu_start_temp_sense(u16 cycles32k);
@@ -732,14 +524,36 @@
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_system_reset(u16 reset_code);
 void prcmu_modem_reset(void);
-bool prcmu_is_ac_wake_requested(void);
 void prcmu_enable_spi2(void);
 void prcmu_disable_spi2(void);
 
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int prcmu_enable_a9wdog(u8 id);
+int prcmu_disable_a9wdog(u8 id);
+int prcmu_kick_a9wdog(u8 id);
+int prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+int db8500_prcmu_set_display_clocks(void);
+int db8500_prcmu_disable_dsipll(void);
+int db8500_prcmu_enable_dsipll(void);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+
 #else /* !CONFIG_MFD_DB8500_PRCMU */
 
+static inline void db8500_prcmu_early_init(void) {}
+
 static inline int prcmu_set_rc_a2p(enum romcode_write code)
 {
 	return 0;
@@ -755,34 +569,12 @@
 	return AP_EXECUTE;
 }
 
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline void prcmu_disable_wakeups(void) {}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
-	return ARM_100_OPP;
-}
-
-static bool prcmu_has_arm_maxopp(void)
+static inline bool prcmu_has_arm_maxopp(void)
 {
 	return false;
 }
 
-static bool prcmu_is_u8400(void)
+static inline bool prcmu_is_u8400(void)
 {
 	return false;
 }
@@ -817,13 +609,6 @@
 	return DDR_100_OPP;
 }
 
-static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
-{
-	return 0;
-}
-
-static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
-
 static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
 {
 	return 0;
@@ -844,21 +629,11 @@
 	return 0;
 }
 
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
-	return 0;
-}
-
 static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
 {
 	return 0;
 }
 
-int prcmu_config_esram0_deep_sleep(u8 state)
-{
-	return 0;
-}
-
 static inline int prcmu_config_hotdog(u8 threshold)
 {
 	return 0;
@@ -893,32 +668,8 @@
 
 static inline void prcmu_ac_sleep_req(void) {}
 
-static inline void prcmu_system_reset(u16 reset_code) {}
-
 static inline void prcmu_modem_reset(void) {}
 
-static inline bool prcmu_is_ac_wake_requested(void)
-{
-	return false;
-}
-
-#ifndef CONFIG_UX500_SOC_DB5500
-static inline int prcmu_set_display_clocks(void)
-{
-	return 0;
-}
-
-static inline int prcmu_disable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
-	return 0;
-}
-#endif
-
 static inline int prcmu_enable_spi2(void)
 {
 	return 0;
@@ -929,50 +680,95 @@
 	return 0;
 }
 
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	return 0;
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 val)
+{
+	return 0;
+}
+
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
 #endif /* !CONFIG_MFD_DB8500_PRCMU */
 
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
-int prcmu_qos_requirement(int pm_qos_class);
-int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
-int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
-void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
-int prcmu_qos_add_notifier(int prcmu_qos_class,
-			   struct notifier_block *notifier);
-int prcmu_qos_remove_notifier(int prcmu_qos_class,
-			      struct notifier_block *notifier);
-#else
-static inline int prcmu_qos_requirement(int prcmu_qos_class)
-{
-	return 0;
-}
-
-static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
-					    char *name, s32 value)
-{
-	return 0;
-}
-
-static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
-					       char *name, s32 new_value)
-{
-	return 0;
-}
-
-static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
-{
-}
-
-static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
-					 struct notifier_block *notifier)
-{
-	return 0;
-}
-static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
-					    struct notifier_block *notifier)
-{
-	return 0;
-}
-
-#endif
-
 #endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
new file mode 100644
index 0000000..bac942f
--- /dev/null
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -0,0 +1,549 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 PRCMU API
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <asm/mach-types.h>
+
+/* PRCMU Wakeup defines */
+enum prcmu_wakeup_index {
+	PRCMU_WAKEUP_INDEX_RTC,
+	PRCMU_WAKEUP_INDEX_RTT0,
+	PRCMU_WAKEUP_INDEX_RTT1,
+	PRCMU_WAKEUP_INDEX_HSI0,
+	PRCMU_WAKEUP_INDEX_HSI1,
+	PRCMU_WAKEUP_INDEX_USB,
+	PRCMU_WAKEUP_INDEX_ABB,
+	PRCMU_WAKEUP_INDEX_ABB_FIFO,
+	PRCMU_WAKEUP_INDEX_ARM,
+	PRCMU_WAKEUP_INDEX_CD_IRQ,
+	NUM_PRCMU_WAKEUP_INDICES
+};
+#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
+
+/* EPOD (power domain) IDs */
+
+/*
+ * DB8500 EPODs
+ * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
+ * - EPOD_ID_SVAPIPE: power domain for SVA pipe
+ * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
+ * - EPOD_ID_SIAPIPE: power domain for SIA pipe
+ * - EPOD_ID_SGA: power domain for SGA
+ * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
+ * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
+ * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
+ * - NUM_EPOD_ID: number of power domains
+ *
+ * TODO: These should be prefixed.
+ */
+#define EPOD_ID_SVAMMDSP	0
+#define EPOD_ID_SVAPIPE		1
+#define EPOD_ID_SIAMMDSP	2
+#define EPOD_ID_SIAPIPE		3
+#define EPOD_ID_SGA		4
+#define EPOD_ID_B2R2_MCDE	5
+#define EPOD_ID_ESRAM12		6
+#define EPOD_ID_ESRAM34		7
+#define NUM_EPOD_ID		8
+
+/*
+ * DB5500 EPODs
+ */
+#define DB5500_EPOD_ID_BASE 0x0100
+#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
+#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
+#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
+#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
+#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
+#define DB5500_NUM_EPOD_ID 7
+
+/*
+ * state definition for EPOD (power domain)
+ * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
+ * - EPOD_STATE_OFF: The EPOD is switched off
+ * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
+ *                         retention
+ * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
+ * - EPOD_STATE_ON: Same as above, but with clock enabled
+ */
+#define EPOD_STATE_NO_CHANGE	0x00
+#define EPOD_STATE_OFF		0x01
+#define EPOD_STATE_RAMRET	0x02
+#define EPOD_STATE_ON_CLK_OFF	0x03
+#define EPOD_STATE_ON		0x04
+
+/*
+ * CLKOUT sources
+ */
+#define PRCMU_CLKSRC_CLK38M		0x00
+#define PRCMU_CLKSRC_ACLK		0x01
+#define PRCMU_CLKSRC_SYSCLK		0x02
+#define PRCMU_CLKSRC_LCDCLK		0x03
+#define PRCMU_CLKSRC_SDMMCCLK		0x04
+#define PRCMU_CLKSRC_TVCLK		0x05
+#define PRCMU_CLKSRC_TIMCLK		0x06
+#define PRCMU_CLKSRC_CLK009		0x07
+/* These are only valid for CLKOUT1: */
+#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
+#define PRCMU_CLKSRC_I2CCLK		0x41
+#define PRCMU_CLKSRC_MSP02CLK		0x42
+#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
+#define PRCMU_CLKSRC_HSIRXCLK		0x44
+#define PRCMU_CLKSRC_HSITXCLK		0x45
+#define PRCMU_CLKSRC_ARMCLKFIX		0x46
+#define PRCMU_CLKSRC_HDMICLK		0x47
+
+/*
+ * Clock identifiers.
+ */
+enum prcmu_clock {
+	PRCMU_SGACLK,
+	PRCMU_UARTCLK,
+	PRCMU_MSP02CLK,
+	PRCMU_MSP1CLK,
+	PRCMU_I2CCLK,
+	PRCMU_SDMMCCLK,
+	PRCMU_SLIMCLK,
+	PRCMU_PER1CLK,
+	PRCMU_PER2CLK,
+	PRCMU_PER3CLK,
+	PRCMU_PER5CLK,
+	PRCMU_PER6CLK,
+	PRCMU_PER7CLK,
+	PRCMU_LCDCLK,
+	PRCMU_BMLCLK,
+	PRCMU_HSITXCLK,
+	PRCMU_HSIRXCLK,
+	PRCMU_HDMICLK,
+	PRCMU_APEATCLK,
+	PRCMU_APETRACECLK,
+	PRCMU_MCDECLK,
+	PRCMU_IPI2CCLK,
+	PRCMU_DSIALTCLK,
+	PRCMU_DMACLK,
+	PRCMU_B2R2CLK,
+	PRCMU_TVCLK,
+	PRCMU_SSPCLK,
+	PRCMU_RNGCLK,
+	PRCMU_UICCCLK,
+	PRCMU_PWMCLK,
+	PRCMU_IRDACLK,
+	PRCMU_IRRCCLK,
+	PRCMU_SIACLK,
+	PRCMU_SVACLK,
+	PRCMU_NUM_REG_CLOCKS,
+	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+	PRCMU_TIMCLK,
+	PRCMU_PLLSOC0,
+	PRCMU_PLLSOC1,
+	PRCMU_PLLDDR,
+};
+
+/**
+ * enum ape_opp - APE OPP states definition
+ * @APE_OPP_INIT:
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ * @APE_50_OPP: 50%
+ */
+enum ape_opp {
+	APE_OPP_INIT = 0x00,
+	APE_NO_CHANGE = 0x01,
+	APE_100_OPP = 0x02,
+	APE_50_OPP = 0x03
+};
+
+/**
+ * enum arm_opp - ARM OPP states definition
+ * @ARM_OPP_INIT:
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm50opp
+ * @ARM_MAX_OPP: Operating point is "max" (more than 100)
+ * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp {
+	ARM_OPP_INIT = 0x00,
+	ARM_NO_CHANGE = 0x01,
+	ARM_100_OPP = 0x02,
+	ARM_50_OPP = 0x03,
+	ARM_MAX_OPP = 0x04,
+	ARM_MAX_FREQ100OPP = 0x05,
+	ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ddr_opp - DDR OPP states definition
+ * @DDR_100_OPP: The new DDR operating point is ddr100opp
+ * @DDR_50_OPP: The new DDR operating point is ddr50opp
+ * @DDR_25_OPP: The new DDR operating point is ddr25opp
+ */
+enum ddr_opp {
+	DDR_100_OPP = 0x00,
+	DDR_50_OPP = 0x01,
+	DDR_25_OPP = 0x02,
+};
+
+/*
+ * Definitions for controlling ESRAM0 in deep sleep.
+ */
+#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
+#define ESRAM0_DEEP_SLEEP_STATE_RET 2
+
+/**
+ * enum ddr_pwrst - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst {
+	DDR_PWR_STATE_UNCHANGED     = 0x00,
+	DDR_PWR_STATE_ON            = 0x01,
+	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
+	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
+};
+
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+static inline void __init prcmu_early_init(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_early_init();
+	else
+		return db8500_prcmu_early_init();
+}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+		bool keep_ap_pll)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_set_power_state(state, keep_ulp_clk,
+			keep_ap_pll);
+	else
+		return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+			keep_ap_pll);
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	if (machine_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_epod(epod_id, epod_state);
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups)
+{
+	if (machine_is_u5500())
+		db5500_prcmu_enable_wakeups(wakeups);
+	else
+		db8500_prcmu_enable_wakeups(wakeups);
+}
+
+static inline void prcmu_disable_wakeups(void)
+{
+	prcmu_enable_wakeups(0);
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events)
+{
+	if (machine_is_u5500())
+		db5500_prcmu_config_abb_event_readout(abb_events);
+	else
+		db8500_prcmu_config_abb_event_readout(abb_events);
+}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+	if (machine_is_u5500())
+		db5500_prcmu_get_abb_event_buffer(buf);
+	else
+		db8500_prcmu_get_abb_event_buffer(buf);
+}
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_request_clock(clock, enable);
+	else
+		return db8500_prcmu_request_clock(clock, enable);
+}
+
+int prcmu_set_ape_opp(u8 opp);
+int prcmu_get_ape_opp(void);
+int prcmu_set_ddr_opp(u8 opp);
+int prcmu_get_ddr_opp(void);
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+	if (machine_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_arm_opp(opp);
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+	if (machine_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_arm_opp();
+}
+
+static inline void prcmu_system_reset(u16 reset_code)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_system_reset(reset_code);
+	else
+		return db8500_prcmu_system_reset(reset_code);
+}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_get_reset_code();
+	else
+		return db8500_prcmu_get_reset_code();
+}
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void prcmu_modem_reset(void);
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_is_ac_wake_requested();
+	else
+		return db8500_prcmu_is_ac_wake_requested();
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_set_display_clocks();
+	else
+		return db8500_prcmu_set_display_clocks();
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_disable_dsipll();
+	else
+		return db8500_prcmu_disable_dsipll();
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+	if (machine_is_u5500())
+		return db5500_prcmu_enable_dsipll();
+	else
+		return db8500_prcmu_enable_dsipll();
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	if (machine_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_esram0_deep_sleep(state);
+}
+#else
+
+static inline void __init prcmu_early_init(void) {}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline void prcmu_disable_wakeups(void) {}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	return 0;
+}
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	return APE_100_OPP;
+}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+	return ARM_100_OPP;
+}
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ddr_opp(void)
+{
+	return DDR_100_OPP;
+}
+
+static inline void prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void prcmu_modem_reset(void) {}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+	return false;
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+	*buf = NULL;
+}
+
+#endif
+
+/* PRCMU QoS APE OPP class */
+#define PRCMU_QOS_APE_OPP 1
+#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_DEFAULT_VALUE -1
+
+#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+
+unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
+void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
+void prcmu_qos_force_opp(int, s32);
+int prcmu_qos_requirement(int pm_qos_class);
+int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
+int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
+void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
+int prcmu_qos_add_notifier(int prcmu_qos_class,
+			   struct notifier_block *notifier);
+int prcmu_qos_remove_notifier(int prcmu_qos_class,
+			      struct notifier_block *notifier);
+
+#else
+
+static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
+
+static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
+
+static inline int prcmu_qos_requirement(int prcmu_qos_class)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
+					    char *name, s32 value)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
+					       char *name, s32 new_value)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+{
+}
+
+static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
+					 struct notifier_block *notifier)
+{
+	return 0;
+}
+static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
+					    struct notifier_block *notifier)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* __MACH_PRCMU_H */
diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h
new file mode 100644
index 0000000..439a7a6
--- /dev/null
+++ b/include/linux/mfd/intel_msic.h
@@ -0,0 +1,456 @@
+/*
+ * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_INTEL_MSIC_H__
+#define __LINUX_MFD_INTEL_MSIC_H__
+
+/* ID */
+#define INTEL_MSIC_ID0			0x000	/* RO */
+#define INTEL_MSIC_ID1			0x001	/* RO */
+
+/* IRQ */
+#define INTEL_MSIC_IRQLVL1		0x002
+#define INTEL_MSIC_ADC1INT		0x003
+#define INTEL_MSIC_CCINT		0x004
+#define INTEL_MSIC_PWRSRCINT		0x005
+#define INTEL_MSIC_PWRSRCINT1		0x006
+#define INTEL_MSIC_CHRINT		0x007
+#define INTEL_MSIC_CHRINT1		0x008
+#define INTEL_MSIC_RTCIRQ		0x009
+#define INTEL_MSIC_GPIO0LVIRQ		0x00a
+#define INTEL_MSIC_GPIO1LVIRQ		0x00b
+#define INTEL_MSIC_GPIOHVIRQ		0x00c
+#define INTEL_MSIC_VRINT		0x00d
+#define INTEL_MSIC_OCAUDIO		0x00e
+#define INTEL_MSIC_ACCDET		0x00f
+#define INTEL_MSIC_RESETIRQ1		0x010
+#define INTEL_MSIC_RESETIRQ2		0x011
+#define INTEL_MSIC_MADC1INT		0x012
+#define INTEL_MSIC_MCCINT		0x013
+#define INTEL_MSIC_MPWRSRCINT		0x014
+#define INTEL_MSIC_MPWRSRCINT1		0x015
+#define INTEL_MSIC_MCHRINT		0x016
+#define INTEL_MSIC_MCHRINT1		0x017
+#define INTEL_MSIC_RTCIRQMASK		0x018
+#define INTEL_MSIC_GPIO0LVIRQMASK	0x019
+#define INTEL_MSIC_GPIO1LVIRQMASK	0x01a
+#define INTEL_MSIC_GPIOHVIRQMASK	0x01b
+#define INTEL_MSIC_VRINTMASK		0x01c
+#define INTEL_MSIC_OCAUDIOMASK		0x01d
+#define INTEL_MSIC_ACCDETMASK		0x01e
+#define INTEL_MSIC_RESETIRQ1MASK	0x01f
+#define INTEL_MSIC_RESETIRQ2MASK	0x020
+#define INTEL_MSIC_IRQLVL1MSK		0x021
+#define INTEL_MSIC_PBCONFIG		0x03e
+#define INTEL_MSIC_PBSTATUS		0x03f	/* RO */
+
+/* GPIO */
+#define INTEL_MSIC_GPIO0LV7CTLO		0x040
+#define INTEL_MSIC_GPIO0LV6CTLO		0x041
+#define INTEL_MSIC_GPIO0LV5CTLO		0x042
+#define INTEL_MSIC_GPIO0LV4CTLO		0x043
+#define INTEL_MSIC_GPIO0LV3CTLO		0x044
+#define INTEL_MSIC_GPIO0LV2CTLO		0x045
+#define INTEL_MSIC_GPIO0LV1CTLO		0x046
+#define INTEL_MSIC_GPIO0LV0CTLO		0x047
+#define INTEL_MSIC_GPIO1LV7CTLOS	0x048
+#define INTEL_MSIC_GPIO1LV6CTLO		0x049
+#define INTEL_MSIC_GPIO1LV5CTLO		0x04a
+#define INTEL_MSIC_GPIO1LV4CTLO		0x04b
+#define INTEL_MSIC_GPIO1LV3CTLO		0x04c
+#define INTEL_MSIC_GPIO1LV2CTLO		0x04d
+#define INTEL_MSIC_GPIO1LV1CTLO		0x04e
+#define INTEL_MSIC_GPIO1LV0CTLO		0x04f
+#define INTEL_MSIC_GPIO0LV7CTLI		0x050
+#define INTEL_MSIC_GPIO0LV6CTLI		0x051
+#define INTEL_MSIC_GPIO0LV5CTLI		0x052
+#define INTEL_MSIC_GPIO0LV4CTLI		0x053
+#define INTEL_MSIC_GPIO0LV3CTLI		0x054
+#define INTEL_MSIC_GPIO0LV2CTLI		0x055
+#define INTEL_MSIC_GPIO0LV1CTLI		0x056
+#define INTEL_MSIC_GPIO0LV0CTLI		0x057
+#define INTEL_MSIC_GPIO1LV7CTLIS	0x058
+#define INTEL_MSIC_GPIO1LV6CTLI		0x059
+#define INTEL_MSIC_GPIO1LV5CTLI		0x05a
+#define INTEL_MSIC_GPIO1LV4CTLI		0x05b
+#define INTEL_MSIC_GPIO1LV3CTLI		0x05c
+#define INTEL_MSIC_GPIO1LV2CTLI		0x05d
+#define INTEL_MSIC_GPIO1LV1CTLI		0x05e
+#define INTEL_MSIC_GPIO1LV0CTLI		0x05f
+#define INTEL_MSIC_PWM0CLKDIV1		0x061
+#define INTEL_MSIC_PWM0CLKDIV0		0x062
+#define INTEL_MSIC_PWM1CLKDIV1		0x063
+#define INTEL_MSIC_PWM1CLKDIV0		0x064
+#define INTEL_MSIC_PWM2CLKDIV1		0x065
+#define INTEL_MSIC_PWM2CLKDIV0		0x066
+#define INTEL_MSIC_PWM0DUTYCYCLE	0x067
+#define INTEL_MSIC_PWM1DUTYCYCLE	0x068
+#define INTEL_MSIC_PWM2DUTYCYCLE	0x069
+#define INTEL_MSIC_GPIO0HV3CTLO		0x06d
+#define INTEL_MSIC_GPIO0HV2CTLO		0x06e
+#define INTEL_MSIC_GPIO0HV1CTLO		0x06f
+#define INTEL_MSIC_GPIO0HV0CTLO		0x070
+#define INTEL_MSIC_GPIO1HV3CTLO		0x071
+#define INTEL_MSIC_GPIO1HV2CTLO		0x072
+#define INTEL_MSIC_GPIO1HV1CTLO		0x073
+#define INTEL_MSIC_GPIO1HV0CTLO		0x074
+#define INTEL_MSIC_GPIO0HV3CTLI		0x075
+#define INTEL_MSIC_GPIO0HV2CTLI		0x076
+#define INTEL_MSIC_GPIO0HV1CTLI		0x077
+#define INTEL_MSIC_GPIO0HV0CTLI		0x078
+#define INTEL_MSIC_GPIO1HV3CTLI		0x079
+#define INTEL_MSIC_GPIO1HV2CTLI		0x07a
+#define INTEL_MSIC_GPIO1HV1CTLI		0x07b
+#define INTEL_MSIC_GPIO1HV0CTLI		0x07c
+
+/* SVID */
+#define INTEL_MSIC_SVIDCTRL0		0x080
+#define INTEL_MSIC_SVIDCTRL1		0x081
+#define INTEL_MSIC_SVIDCTRL2		0x082
+#define INTEL_MSIC_SVIDTXLASTPKT3	0x083	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT2	0x084	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT1	0x085	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT0	0x086	/* RO */
+#define INTEL_MSIC_SVIDPKTOUTBYTE3	0x087
+#define INTEL_MSIC_SVIDPKTOUTBYTE2	0x088
+#define INTEL_MSIC_SVIDPKTOUTBYTE1	0x089
+#define INTEL_MSIC_SVIDPKTOUTBYTE0	0x08a
+#define INTEL_MSIC_SVIDRXVPDEBUG1	0x08b
+#define INTEL_MSIC_SVIDRXVPDEBUG0	0x08c
+#define INTEL_MSIC_SVIDRXLASTPKT3	0x08d	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT2	0x08e	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT1	0x08f	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT0	0x090	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS3	0x091	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS2	0x092	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS1	0x093	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS0	0x094	/* RO */
+
+/* VREG */
+#define INTEL_MSIC_VCCLATCH		0x0c0
+#define INTEL_MSIC_VNNLATCH		0x0c1
+#define INTEL_MSIC_VCCCNT		0x0c2
+#define INTEL_MSIC_SMPSRAMP		0x0c3
+#define INTEL_MSIC_VNNCNT		0x0c4
+#define INTEL_MSIC_VNNAONCNT		0x0c5
+#define INTEL_MSIC_VCC122AONCNT		0x0c6
+#define INTEL_MSIC_V180AONCNT		0x0c7
+#define INTEL_MSIC_V500CNT		0x0c8
+#define INTEL_MSIC_VIHFCNT		0x0c9
+#define INTEL_MSIC_LDORAMP1		0x0ca
+#define INTEL_MSIC_LDORAMP2		0x0cb
+#define INTEL_MSIC_VCC108AONCNT		0x0cc
+#define INTEL_MSIC_VCC108ASCNT		0x0cd
+#define INTEL_MSIC_VCC108CNT		0x0ce
+#define INTEL_MSIC_VCCA100ASCNT		0x0cf
+#define INTEL_MSIC_VCCA100CNT		0x0d0
+#define INTEL_MSIC_VCC180AONCNT		0x0d1
+#define INTEL_MSIC_VCC180CNT		0x0d2
+#define INTEL_MSIC_VCC330CNT		0x0d3
+#define INTEL_MSIC_VUSB330CNT		0x0d4
+#define INTEL_MSIC_VCCSDIOCNT		0x0d5
+#define INTEL_MSIC_VPROG1CNT		0x0d6
+#define INTEL_MSIC_VPROG2CNT		0x0d7
+#define INTEL_MSIC_VEMMCSCNT		0x0d8
+#define INTEL_MSIC_VEMMC1CNT		0x0d9
+#define INTEL_MSIC_VEMMC2CNT		0x0da
+#define INTEL_MSIC_VAUDACNT		0x0db
+#define INTEL_MSIC_VHSPCNT		0x0dc
+#define INTEL_MSIC_VHSNCNT		0x0dd
+#define INTEL_MSIC_VHDMICNT		0x0de
+#define INTEL_MSIC_VOTGCNT		0x0df
+#define INTEL_MSIC_V1P35CNT		0x0e0
+#define INTEL_MSIC_V330AONCNT		0x0e1
+
+/* RESET */
+#define INTEL_MSIC_CHIPCNTRL		0x100	/* WO */
+#define INTEL_MSIC_ERCONFIG		0x101
+
+/* BURST */
+#define INTEL_MSIC_BATCURRENTLIMIT12	0x102
+#define INTEL_MSIC_BATTIMELIMIT12	0x103
+#define INTEL_MSIC_BATTIMELIMIT3	0x104
+#define INTEL_MSIC_BATTIMEDB		0x105
+#define INTEL_MSIC_BRSTCONFIGOUTPUTS	0x106
+#define INTEL_MSIC_BRSTCONFIGACTIONS	0x107
+#define INTEL_MSIC_BURSTCONTROLSTATUS	0x108
+
+/* RTC */
+#define INTEL_MSIC_RTCB1		0x140	/* RO */
+#define INTEL_MSIC_RTCB2		0x141	/* RO */
+#define INTEL_MSIC_RTCB3		0x142	/* RO */
+#define INTEL_MSIC_RTCB4		0x143	/* RO */
+#define INTEL_MSIC_RTCOB1		0x144
+#define INTEL_MSIC_RTCOB2		0x145
+#define INTEL_MSIC_RTCOB3		0x146
+#define INTEL_MSIC_RTCOB4		0x147
+#define INTEL_MSIC_RTCAB1		0x148
+#define INTEL_MSIC_RTCAB2		0x149
+#define INTEL_MSIC_RTCAB3		0x14a
+#define INTEL_MSIC_RTCAB4		0x14b
+#define INTEL_MSIC_RTCWAB1		0x14c
+#define INTEL_MSIC_RTCWAB2		0x14d
+#define INTEL_MSIC_RTCWAB3		0x14e
+#define INTEL_MSIC_RTCWAB4		0x14f
+#define INTEL_MSIC_RTCSC1		0x150
+#define INTEL_MSIC_RTCSC2		0x151
+#define INTEL_MSIC_RTCSC3		0x152
+#define INTEL_MSIC_RTCSC4		0x153
+#define INTEL_MSIC_RTCSTATUS		0x154	/* RO */
+#define INTEL_MSIC_RTCCONFIG1		0x155
+#define INTEL_MSIC_RTCCONFIG2		0x156
+
+/* CHARGER */
+#define INTEL_MSIC_BDTIMER		0x180
+#define INTEL_MSIC_BATTRMV		0x181
+#define INTEL_MSIC_VBUSDET		0x182
+#define INTEL_MSIC_VBUSDET1		0x183
+#define INTEL_MSIC_ADPHVDET		0x184
+#define INTEL_MSIC_ADPLVDET		0x185
+#define INTEL_MSIC_ADPDETDBDM		0x186
+#define INTEL_MSIC_LOWBATTDET		0x187
+#define INTEL_MSIC_CHRCTRL		0x188
+#define INTEL_MSIC_CHRCVOLTAGE		0x189
+#define INTEL_MSIC_CHRCCURRENT		0x18a
+#define INTEL_MSIC_SPCHARGER		0x18b
+#define INTEL_MSIC_CHRTTIME		0x18c
+#define INTEL_MSIC_CHRCTRL1		0x18d
+#define INTEL_MSIC_PWRSRCLMT		0x18e
+#define INTEL_MSIC_CHRSTWDT		0x18f
+#define INTEL_MSIC_WDTWRITE		0x190	/* WO */
+#define INTEL_MSIC_CHRSAFELMT		0x191
+#define INTEL_MSIC_SPWRSRCINT		0x192	/* RO */
+#define INTEL_MSIC_SPWRSRCINT1		0x193	/* RO */
+#define INTEL_MSIC_CHRLEDPWM		0x194
+#define INTEL_MSIC_CHRLEDCTRL		0x195
+
+/* ADC */
+#define INTEL_MSIC_ADC1CNTL1		0x1c0
+#define INTEL_MSIC_ADC1CNTL2		0x1c1
+#define INTEL_MSIC_ADC1CNTL3		0x1c2
+#define INTEL_MSIC_ADC1OFFSETH		0x1c3	/* RO */
+#define INTEL_MSIC_ADC1OFFSETL		0x1c4	/* RO */
+#define INTEL_MSIC_ADC1ADDR0		0x1c5
+#define INTEL_MSIC_ADC1ADDR1		0x1c6
+#define INTEL_MSIC_ADC1ADDR2		0x1c7
+#define INTEL_MSIC_ADC1ADDR3		0x1c8
+#define INTEL_MSIC_ADC1ADDR4		0x1c9
+#define INTEL_MSIC_ADC1ADDR5		0x1ca
+#define INTEL_MSIC_ADC1ADDR6		0x1cb
+#define INTEL_MSIC_ADC1ADDR7		0x1cc
+#define INTEL_MSIC_ADC1ADDR8		0x1cd
+#define INTEL_MSIC_ADC1ADDR9		0x1ce
+#define INTEL_MSIC_ADC1ADDR10		0x1cf
+#define INTEL_MSIC_ADC1ADDR11		0x1d0
+#define INTEL_MSIC_ADC1ADDR12		0x1d1
+#define INTEL_MSIC_ADC1ADDR13		0x1d2
+#define INTEL_MSIC_ADC1ADDR14		0x1d3
+#define INTEL_MSIC_ADC1SNS0H		0x1d4	/* RO */
+#define INTEL_MSIC_ADC1SNS0L		0x1d5	/* RO */
+#define INTEL_MSIC_ADC1SNS1H		0x1d6	/* RO */
+#define INTEL_MSIC_ADC1SNS1L		0x1d7	/* RO */
+#define INTEL_MSIC_ADC1SNS2H		0x1d8	/* RO */
+#define INTEL_MSIC_ADC1SNS2L		0x1d9	/* RO */
+#define INTEL_MSIC_ADC1SNS3H		0x1da	/* RO */
+#define INTEL_MSIC_ADC1SNS3L		0x1db	/* RO */
+#define INTEL_MSIC_ADC1SNS4H		0x1dc	/* RO */
+#define INTEL_MSIC_ADC1SNS4L		0x1dd	/* RO */
+#define INTEL_MSIC_ADC1SNS5H		0x1de	/* RO */
+#define INTEL_MSIC_ADC1SNS5L		0x1df	/* RO */
+#define INTEL_MSIC_ADC1SNS6H		0x1e0	/* RO */
+#define INTEL_MSIC_ADC1SNS6L		0x1e1	/* RO */
+#define INTEL_MSIC_ADC1SNS7H		0x1e2	/* RO */
+#define INTEL_MSIC_ADC1SNS7L		0x1e3	/* RO */
+#define INTEL_MSIC_ADC1SNS8H		0x1e4	/* RO */
+#define INTEL_MSIC_ADC1SNS8L		0x1e5	/* RO */
+#define INTEL_MSIC_ADC1SNS9H		0x1e6	/* RO */
+#define INTEL_MSIC_ADC1SNS9L		0x1e7	/* RO */
+#define INTEL_MSIC_ADC1SNS10H		0x1e8	/* RO */
+#define INTEL_MSIC_ADC1SNS10L		0x1e9	/* RO */
+#define INTEL_MSIC_ADC1SNS11H		0x1ea	/* RO */
+#define INTEL_MSIC_ADC1SNS11L		0x1eb	/* RO */
+#define INTEL_MSIC_ADC1SNS12H		0x1ec	/* RO */
+#define INTEL_MSIC_ADC1SNS12L		0x1ed	/* RO */
+#define INTEL_MSIC_ADC1SNS13H		0x1ee	/* RO */
+#define INTEL_MSIC_ADC1SNS13L		0x1ef	/* RO */
+#define INTEL_MSIC_ADC1SNS14H		0x1f0	/* RO */
+#define INTEL_MSIC_ADC1SNS14L		0x1f1	/* RO */
+#define INTEL_MSIC_ADC1BV0H		0x1f2	/* RO */
+#define INTEL_MSIC_ADC1BV0L		0x1f3	/* RO */
+#define INTEL_MSIC_ADC1BV1H		0x1f4	/* RO */
+#define INTEL_MSIC_ADC1BV1L		0x1f5	/* RO */
+#define INTEL_MSIC_ADC1BV2H		0x1f6	/* RO */
+#define INTEL_MSIC_ADC1BV2L		0x1f7	/* RO */
+#define INTEL_MSIC_ADC1BV3H		0x1f8	/* RO */
+#define INTEL_MSIC_ADC1BV3L		0x1f9	/* RO */
+#define INTEL_MSIC_ADC1BI0H		0x1fa	/* RO */
+#define INTEL_MSIC_ADC1BI0L		0x1fb	/* RO */
+#define INTEL_MSIC_ADC1BI1H		0x1fc	/* RO */
+#define INTEL_MSIC_ADC1BI1L		0x1fd	/* RO */
+#define INTEL_MSIC_ADC1BI2H		0x1fe	/* RO */
+#define INTEL_MSIC_ADC1BI2L		0x1ff	/* RO */
+#define INTEL_MSIC_ADC1BI3H		0x200	/* RO */
+#define INTEL_MSIC_ADC1BI3L		0x201	/* RO */
+#define INTEL_MSIC_CCCNTL		0x202
+#define INTEL_MSIC_CCOFFSETH		0x203	/* RO */
+#define INTEL_MSIC_CCOFFSETL		0x204	/* RO */
+#define INTEL_MSIC_CCADCHA		0x205	/* RO */
+#define INTEL_MSIC_CCADCLA		0x206	/* RO */
+
+/* AUDIO */
+#define INTEL_MSIC_AUDPLLCTRL		0x240
+#define INTEL_MSIC_DMICBUF0123		0x241
+#define INTEL_MSIC_DMICBUF45		0x242
+#define INTEL_MSIC_DMICGPO		0x244
+#define INTEL_MSIC_DMICMUX		0x245
+#define INTEL_MSIC_DMICCLK		0x246
+#define INTEL_MSIC_MICBIAS		0x247
+#define INTEL_MSIC_ADCCONFIG		0x248
+#define INTEL_MSIC_MICAMP1		0x249
+#define INTEL_MSIC_MICAMP2		0x24a
+#define INTEL_MSIC_NOISEMUX		0x24b
+#define INTEL_MSIC_AUDIOMUX12		0x24c
+#define INTEL_MSIC_AUDIOMUX34		0x24d
+#define INTEL_MSIC_AUDIOSINC		0x24e
+#define INTEL_MSIC_AUDIOTXEN		0x24f
+#define INTEL_MSIC_HSEPRXCTRL		0x250
+#define INTEL_MSIC_IHFRXCTRL		0x251
+#define INTEL_MSIC_VOICETXVOL		0x252
+#define INTEL_MSIC_SIDETONEVOL		0x253
+#define INTEL_MSIC_MUSICSHARVOL		0x254
+#define INTEL_MSIC_VOICETXCTRL		0x255
+#define INTEL_MSIC_HSMIXER		0x256
+#define INTEL_MSIC_DACCONFIG		0x257
+#define INTEL_MSIC_SOFTMUTE		0x258
+#define INTEL_MSIC_HSLVOLCTRL		0x259
+#define INTEL_MSIC_HSRVOLCTRL		0x25a
+#define INTEL_MSIC_IHFLVOLCTRL		0x25b
+#define INTEL_MSIC_IHFRVOLCTRL		0x25c
+#define INTEL_MSIC_DRIVEREN		0x25d
+#define INTEL_MSIC_LINEOUTCTRL		0x25e
+#define INTEL_MSIC_VIB1CTRL1		0x25f
+#define INTEL_MSIC_VIB1CTRL2		0x260
+#define INTEL_MSIC_VIB1CTRL3		0x261
+#define INTEL_MSIC_VIB1SPIPCM_1		0x262
+#define INTEL_MSIC_VIB1SPIPCM_2		0x263
+#define INTEL_MSIC_VIB1CTRL5		0x264
+#define INTEL_MSIC_VIB2CTRL1		0x265
+#define INTEL_MSIC_VIB2CTRL2		0x266
+#define INTEL_MSIC_VIB2CTRL3		0x267
+#define INTEL_MSIC_VIB2SPIPCM_1		0x268
+#define INTEL_MSIC_VIB2SPIPCM_2		0x269
+#define INTEL_MSIC_VIB2CTRL5		0x26a
+#define INTEL_MSIC_BTNCTRL1		0x26b
+#define INTEL_MSIC_BTNCTRL2		0x26c
+#define INTEL_MSIC_PCM1TXSLOT01		0x26d
+#define INTEL_MSIC_PCM1TXSLOT23		0x26e
+#define INTEL_MSIC_PCM1TXSLOT45		0x26f
+#define INTEL_MSIC_PCM1RXSLOT0123	0x270
+#define INTEL_MSIC_PCM1RXSLOT045	0x271
+#define INTEL_MSIC_PCM2TXSLOT01		0x272
+#define INTEL_MSIC_PCM2TXSLOT23		0x273
+#define INTEL_MSIC_PCM2TXSLOT45		0x274
+#define INTEL_MSIC_PCM2RXSLOT01		0x275
+#define INTEL_MSIC_PCM2RXSLOT23		0x276
+#define INTEL_MSIC_PCM2RXSLOT45		0x277
+#define INTEL_MSIC_PCM1CTRL1		0x278
+#define INTEL_MSIC_PCM1CTRL2		0x279
+#define INTEL_MSIC_PCM1CTRL3		0x27a
+#define INTEL_MSIC_PCM2CTRL1		0x27b
+#define INTEL_MSIC_PCM2CTRL2		0x27c
+
+/* HDMI */
+#define INTEL_MSIC_HDMIPUEN		0x280
+#define INTEL_MSIC_HDMISTATUS		0x281	/* RO */
+
+/* Physical address of the start of the MSIC interrupt tree in SRAM */
+#define INTEL_MSIC_IRQ_PHYS_BASE	0xffff7fc0
+
+/**
+ * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
+ * @gpio_base: base number for the GPIOs
+ */
+struct intel_msic_gpio_pdata {
+	unsigned	gpio_base;
+};
+
+/**
+ * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
+ * @gpio: GPIO number used for OCD interrupts
+ *
+ * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
+ * the OCD driver as %IORESOURCE_IRQ.
+ */
+struct intel_msic_ocd_pdata {
+	unsigned	gpio;
+};
+
+/* MSIC embedded blocks (subdevices) */
+enum intel_msic_block {
+	INTEL_MSIC_BLOCK_TOUCH,
+	INTEL_MSIC_BLOCK_ADC,
+	INTEL_MSIC_BLOCK_BATTERY,
+	INTEL_MSIC_BLOCK_GPIO,
+	INTEL_MSIC_BLOCK_AUDIO,
+	INTEL_MSIC_BLOCK_HDMI,
+	INTEL_MSIC_BLOCK_THERMAL,
+	INTEL_MSIC_BLOCK_POWER_BTN,
+	INTEL_MSIC_BLOCK_OCD,
+
+	INTEL_MSIC_BLOCK_LAST,
+};
+
+/**
+ * struct intel_msic_platform_data - platform data for the MSIC driver
+ * @irq: array of interrupt numbers, one per device. If @irq is set to %0
+ *	 for a given block, the corresponding platform device is not
+ *	 created. For devices which don't have an interrupt, use %0xff
+ *	 (this is same as in SFI spec).
+ * @gpio: platform data for the MSIC GPIO driver
+ * @ocd: platform data for the MSIC OCD driver
+ *
+ * Once the MSIC driver is initialized, the register interface is ready to
+ * use. All the platform devices for subdevices are created after the
+ * register interface is ready so that we can guarantee its availability to
+ * the subdevice drivers.
+ *
+ * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
+ * resources of the created platform device.
+ */
+struct intel_msic_platform_data {
+	int				irq[INTEL_MSIC_BLOCK_LAST];
+	struct intel_msic_gpio_pdata	*gpio;
+	struct intel_msic_ocd_pdata	*ocd;
+};
+
+struct intel_msic;
+
+extern int intel_msic_reg_read(unsigned short reg, u8 *val);
+extern int intel_msic_reg_write(unsigned short reg, u8 val);
+extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
+extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
+extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
+
+/*
+ * pdev_to_intel_msic - gets an MSIC instance from the platform device
+ * @pdev: platform device pointer
+ *
+ * The client drivers need to have pointer to the MSIC instance if they
+ * want to call intel_msic_irq_read(). This macro can be used for
+ * convenience to get the MSIC pointer from @pdev where needed. This is
+ * _only_ valid for devices which are managed by the MSIC.
+ */
+#define pdev_to_intel_msic(pdev)	(dev_get_drvdata(pdev->dev.parent))
+
+extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
+			       u8 *val);
+
+#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 5ff2400..3f4deb6 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -326,7 +326,6 @@
 	int irq;
 	int ono;
 	int irq_base;
-	bool wakeup;
 	struct mutex irqlock;
 	int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
 	int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 7d0f3d6..a8eeda7 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -12,117 +12,6 @@
 
 #include <linux/mfd/mc13xxx.h>
 
-struct mc13783;
-
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783);
-
-static inline void mc13783_lock(struct mc13783 *mc13783)
-{
-	mc13xxx_lock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline void mc13783_unlock(struct mc13783 *mc13783)
-{
-	mc13xxx_unlock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_reg_read(struct mc13783 *mc13783,
-		unsigned int offset, u32 *val)
-{
-	return mc13xxx_reg_read(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_write(struct mc13783 *mc13783,
-		unsigned int offset, u32 val)
-{
-	return mc13xxx_reg_write(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_rmw(struct mc13783 *mc13783,
-		unsigned int offset, u32 mask, u32 val)
-{
-	return mc13xxx_reg_rmw(mc13783_to_mc13xxx(mc13783), offset, mask, val);
-}
-
-static inline int mc13783_get_flags(struct mc13783 *mc13783)
-{
-	return mc13xxx_get_flags(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_irq_request(struct mc13783 *mc13783, int irq,
-		irq_handler_t handler, const char *name, void *dev)
-{
-	return mc13xxx_irq_request(mc13783_to_mc13xxx(mc13783), irq,
-			handler, name, dev);
-}
-
-static inline int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
-		irq_handler_t handler, const char *name, void *dev)
-{
-	return mc13xxx_irq_request_nounmask(mc13783_to_mc13xxx(mc13783), irq,
-			handler, name, dev);
-}
-
-static inline int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
-{
-	return mc13xxx_irq_free(mc13783_to_mc13xxx(mc13783), irq, dev);
-}
-
-static inline int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
-{
-	return mc13xxx_irq_mask(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-static inline int mc13783_irq_unmask(struct mc13783 *mc13783, int irq)
-{
-	return mc13xxx_irq_unmask(mc13783_to_mc13xxx(mc13783), irq);
-}
-static inline int mc13783_irq_status(struct mc13783 *mc13783, int irq,
-		int *enabled, int *pending)
-{
-	return mc13xxx_irq_status(mc13783_to_mc13xxx(mc13783),
-			irq, enabled, pending);
-}
-
-static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq)
-{
-	return mc13xxx_irq_ack(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-#define MC13783_ADC0		43
-#define MC13783_ADC0_ADREFEN		(1 << 10)
-#define MC13783_ADC0_ADREFMODE		(1 << 11)
-#define MC13783_ADC0_TSMOD0		(1 << 12)
-#define MC13783_ADC0_TSMOD1		(1 << 13)
-#define MC13783_ADC0_TSMOD2		(1 << 14)
-#define MC13783_ADC0_ADINC1		(1 << 16)
-#define MC13783_ADC0_ADINC2		(1 << 17)
-
-#define MC13783_ADC0_TSMOD_MASK		(MC13783_ADC0_TSMOD0 | \
-					MC13783_ADC0_TSMOD1 | \
-					MC13783_ADC0_TSMOD2)
-
-#define mc13783_regulator_init_data mc13xxx_regulator_init_data
-#define mc13783_regulator_platform_data mc13xxx_regulator_platform_data
-#define mc13783_led_platform_data mc13xxx_led_platform_data
-#define mc13783_leds_platform_data mc13xxx_leds_platform_data
-
-#define mc13783_platform_data mc13xxx_platform_data
-#define MC13783_USE_TOUCHSCREEN	MC13XXX_USE_TOUCHSCREEN
-#define MC13783_USE_CODEC	MC13XXX_USE_CODEC
-#define MC13783_USE_ADC		MC13XXX_USE_ADC
-#define MC13783_USE_RTC		MC13XXX_USE_RTC
-#define MC13783_USE_REGULATOR	MC13XXX_USE_REGULATOR
-#define MC13783_USE_LED		MC13XXX_USE_LED
-
-#define MC13783_ADC_MODE_TS		1
-#define MC13783_ADC_MODE_SINGLE_CHAN	2
-#define MC13783_ADC_MODE_MULT_CHAN	3
-
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
-		unsigned int channel, unsigned int *sample);
-
-
 #define	MC13783_REG_SW1A		0
 #define	MC13783_REG_SW1B		1
 #define	MC13783_REG_SW2A		2
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index c064bea..3816c2f 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -37,6 +37,9 @@
 
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
 
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
+		unsigned int mode, unsigned int channel, unsigned int *sample);
+
 #define MC13XXX_IRQ_ADCDONE	0
 #define MC13XXX_IRQ_ADCBISDONE	1
 #define MC13XXX_IRQ_TS		2
@@ -137,17 +140,48 @@
 	char tc3_period;
 };
 
+struct mc13xxx_buttons_platform_data {
+#define MC13783_BUTTON_DBNC_0MS		0
+#define MC13783_BUTTON_DBNC_30MS	1
+#define MC13783_BUTTON_DBNC_150MS	2
+#define MC13783_BUTTON_DBNC_750MS	3
+#define MC13783_BUTTON_ENABLE		(1 << 2)
+#define MC13783_BUTTON_POL_INVERT	(1 << 3)
+#define MC13783_BUTTON_RESET_EN		(1 << 4)
+	int b1on_flags;
+	unsigned short b1on_key;
+	int b2on_flags;
+	unsigned short b2on_key;
+	int b3on_flags;
+	unsigned short b3on_key;
+};
+
 struct mc13xxx_platform_data {
 #define MC13XXX_USE_TOUCHSCREEN (1 << 0)
 #define MC13XXX_USE_CODEC	(1 << 1)
 #define MC13XXX_USE_ADC		(1 << 2)
 #define MC13XXX_USE_RTC		(1 << 3)
-#define MC13XXX_USE_REGULATOR	(1 << 4)
-#define MC13XXX_USE_LED		(1 << 5)
 	unsigned int flags;
 
 	struct mc13xxx_regulator_platform_data regulators;
 	struct mc13xxx_leds_platform_data *leds;
+	struct mc13xxx_buttons_platform_data *buttons;
 };
 
+#define MC13XXX_ADC_MODE_TS		1
+#define MC13XXX_ADC_MODE_SINGLE_CHAN	2
+#define MC13XXX_ADC_MODE_MULT_CHAN	3
+
+#define MC13XXX_ADC0		43
+#define MC13XXX_ADC0_ADREFEN		(1 << 10)
+#define MC13XXX_ADC0_TSMOD0		(1 << 12)
+#define MC13XXX_ADC0_TSMOD1		(1 << 13)
+#define MC13XXX_ADC0_TSMOD2		(1 << 14)
+#define MC13XXX_ADC0_ADINC1		(1 << 16)
+#define MC13XXX_ADC0_ADINC2		(1 << 17)
+
+#define MC13XXX_ADC0_TSMOD_MASK		(MC13XXX_ADC0_TSMOD0 | \
+					MC13XXX_ADC0_TSMOD1 | \
+					MC13XXX_ADC0_TSMOD2)
+
 #endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 50d4a04..a808407 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -21,6 +21,7 @@
 #include <linux/mfd/pcf50633/backlight.h>
 
 struct pcf50633;
+struct regmap;
 
 #define PCF50633_NUM_REGULATORS	11
 
@@ -134,7 +135,7 @@
 
 struct pcf50633 {
 	struct device *dev;
-	struct i2c_client *i2c_client;
+	struct regmap *regmap;
 
 	struct pcf50633_platform_data *pdata;
 	int irq;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 82b4c88..8bf2cb9 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -243,7 +243,8 @@
 
 
 /*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLTS				73
+#define VDD1_2_NUM_VOLT_FINE				73
+#define VDD1_2_NUM_VOLT_COARSE				3
 #define VDD1_2_MIN_VOLT					6000
 #define VDD1_2_OFFSET					125
 
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index ed8fe0d..4b12118 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -382,6 +382,7 @@
 
 	/* Used by the interrupt controller code to post writes */
 	int gpio_update[WM831X_NUM_GPIO_REGS];
+	bool gpio_level[WM831X_NUM_GPIO_REGS];
 
 	struct mutex auxadc_lock;
 	struct list_head auxadc_pending;
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 6268091..f44bdb7 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -59,6 +59,8 @@
 	struct device *dev;
 	struct regmap *regmap;
 
+	bool ldo_ena_always_driven;
+
 	int gpio_base;
 	int irq_base;
 
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 97cf4f2..ea32f30 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -167,6 +167,13 @@
 
 	/* WM8958 microphone bias configuration */
 	int micbias[2];
+
+	/* Disable the internal pull downs on the LDOs if they are
+	 * always driven (eg, connected to an always on supply or
+	 * GPIO that always drives an output.  If they float power
+	 * consumption will rise.
+	 */
+	bool ldo_ena_always_driven;
 };
 
 #endif
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index fae2950..83a9cae 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -1963,6 +1963,21 @@
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
 /*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
  * R76 (0x4C) - Charge Pump (1)
  */
 #define WM8994_CP_ENA                           0x8000  /* CP_ENA */
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index c309b1e..c41d727 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -1,7 +1,8 @@
 #ifndef _LINUX_MISCDEVICE_H
 #define _LINUX_MISCDEVICE_H
-#include <linux/module.h>
 #include <linux/major.h>
+#include <linux/list.h>
+#include <linux/types.h>
 
 /*
  *	These allocations are managed by device@lanana.org. If you use an
diff --git a/include/linux/module.h b/include/linux/module.h
index 8639216..3cb7839 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -16,6 +16,7 @@
 #include <linux/kobject.h>
 #include <linux/moduleparam.h>
 #include <linux/tracepoint.h>
+#include <linux/export.h>
 
 #include <linux/percpu.h>
 #include <asm/module.h>
@@ -25,21 +26,8 @@
 /* Not Yet Implemented */
 #define MODULE_SUPPORTED_DEVICE(name)
 
-/* Some toolchains use a `_' prefix for all user symbols. */
-#ifdef CONFIG_SYMBOL_PREFIX
-#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
-#else
-#define MODULE_SYMBOL_PREFIX ""
-#endif
-
 #define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN
 
-struct kernel_symbol
-{
-	unsigned long value;
-	const char *name;
-};
-
 struct modversion_info
 {
 	unsigned long crc;
@@ -98,11 +86,8 @@
 extern const struct gtype##_id __mod_##gtype##_table		\
   __attribute__ ((unused, alias(__stringify(name))))
 
-extern struct module __this_module;
-#define THIS_MODULE (&__this_module)
 #else  /* !MODULE */
 #define MODULE_GENERIC_TABLE(gtype,name)
-#define THIS_MODULE ((struct module *)0)
 #endif
 
 /* Generic info of form tag = "info" */
@@ -150,11 +135,6 @@
 /* What your module does. */
 #define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
 
-/* One for each parameter, describing how to use it.  Some files do
-   multiple of these per line, so can't just use MODULE_INFO. */
-#define MODULE_PARM_DESC(_parm, desc) \
-	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-
 #define MODULE_DEVICE_TABLE(type,name)		\
   MODULE_GENERIC_TABLE(type##_device,name)
 
@@ -218,52 +198,6 @@
 	struct module *source, *target;
 };
 
-#ifndef __GENKSYMS__
-#ifdef CONFIG_MODVERSIONS
-/* Mark the CRC weak since genksyms apparently decides not to
- * generate a checksums for some symbols */
-#define __CRC_SYMBOL(sym, sec)					\
-	extern void *__crc_##sym __attribute__((weak));		\
-	static const unsigned long __kcrctab_##sym		\
-	__used							\
-	__attribute__((section("___kcrctab" sec "+" #sym), unused))	\
-	= (unsigned long) &__crc_##sym;
-#else
-#define __CRC_SYMBOL(sym, sec)
-#endif
-
-/* For every exported symbol, place a struct in the __ksymtab section */
-#define __EXPORT_SYMBOL(sym, sec)				\
-	extern typeof(sym) sym;					\
-	__CRC_SYMBOL(sym, sec)					\
-	static const char __kstrtab_##sym[]			\
-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
-	= MODULE_SYMBOL_PREFIX #sym;                    	\
-	static const struct kernel_symbol __ksymtab_##sym	\
-	__used							\
-	__attribute__((section("___ksymtab" sec "+" #sym), unused))	\
-	= { (unsigned long)&sym, __kstrtab_##sym }
-
-#define EXPORT_SYMBOL(sym)					\
-	__EXPORT_SYMBOL(sym, "")
-
-#define EXPORT_SYMBOL_GPL(sym)					\
-	__EXPORT_SYMBOL(sym, "_gpl")
-
-#define EXPORT_SYMBOL_GPL_FUTURE(sym)				\
-	__EXPORT_SYMBOL(sym, "_gpl_future")
-
-
-#ifdef CONFIG_UNUSED_SYMBOLS
-#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
-#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
-#else
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
-#endif
-
-#endif
-
 enum module_state
 {
 	MODULE_STATE_LIVE,
@@ -581,11 +515,6 @@
 extern void print_modules(void);
 
 #else /* !CONFIG_MODULES... */
-#define EXPORT_SYMBOL(sym)
-#define EXPORT_SYMBOL_GPL(sym)
-#define EXPORT_SYMBOL_GPL_FUTURE(sym)
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
 
 /* Given an address, look for it in the exception tables. */
 static inline const struct exception_table_entry *
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index fffb10b..7939f63 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -31,6 +31,11 @@
 #define __MODULE_PARM_TYPE(name, _type)					  \
   __MODULE_INFO(parmtype, name##type, #name ":" _type)
 
+/* One for each parameter, describing how to use it.  Some files do
+   multiple of these per line, so can't just use MODULE_INFO. */
+#define MODULE_PARM_DESC(_parm, desc) \
+	__MODULE_INFO(parm, _parm, #_parm ":" desc)
+
 struct kernel_param;
 
 struct kernel_param_ops {
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 57cc0e6..c4eec22 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -86,24 +86,39 @@
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none exists */
 #define NAND_BBT_CREATE		0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY	0x00000400
 /* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
+#define NAND_BBT_SCANALLPAGES	0x00000800
 /* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
+#define NAND_BBT_SCANEMPTY	0x00001000
 /* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00001000
+#define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00002000
+#define NAND_BBT_SAVECONTENT	0x00004000
 /* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00004000
+#define NAND_BBT_SCAN2NDPAGE	0x00008000
 /* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE	0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB		0x00400000
+#define NAND_BBT_SCANLASTPAGE	0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH	0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB		0x00040000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT	0x80000000
 
 /* The maximum number of blocks to scan for a bbt */
 #define NAND_BBT_SCAN_MAXBLOCKS	4
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 2541fb8..9f5b312 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -21,7 +21,6 @@
 #define __MTD_MTD_H__
 
 #include <linux/types.h>
-#include <linux/module.h>
 #include <linux/uio.h>
 #include <linux/notifier.h>
 #include <linux/device.h>
@@ -33,17 +32,19 @@
 #define MTD_CHAR_MAJOR 90
 #define MTD_BLOCK_MAJOR 31
 
-#define MTD_ERASE_PENDING      	0x01
+#define MTD_ERASE_PENDING	0x01
 #define MTD_ERASING		0x02
 #define MTD_ERASE_SUSPEND	0x04
-#define MTD_ERASE_DONE          0x08
-#define MTD_ERASE_FAILED        0x10
+#define MTD_ERASE_DONE		0x08
+#define MTD_ERASE_FAILED	0x10
 
 #define MTD_FAIL_ADDR_UNKNOWN -1LL
 
-/* If the erase fails, fail_addr might indicate exactly which block failed.  If
-   fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
-   specific to any particular block. */
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
 struct erase_info {
 	struct mtd_info *mtd;
 	uint64_t addr;
@@ -60,26 +61,12 @@
 };
 
 struct mtd_erase_region_info {
-	uint64_t offset;			/* At which this region starts, from the beginning of the MTD */
+	uint64_t offset;		/* At which this region starts, from the beginning of the MTD */
 	uint32_t erasesize;		/* For this region */
 	uint32_t numblocks;		/* Number of blocks of erasesize in this region */
 	unsigned long *lockmap;		/* If keeping bitmap of locks */
 };
 
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE:	oob data are placed at the given offset
- * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
- *			which are defined by the ecclayout
- * MTD_OOB_RAW:		mode to read oob and data without doing ECC checking
- */
-typedef enum {
-	MTD_OOB_PLACE,
-	MTD_OOB_AUTO,
-	MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
 /**
  * struct mtd_oob_ops - oob operation operands
  * @mode:	operation mode
@@ -91,7 +78,7 @@
  * @ooblen:	number of oob bytes to write/read
  * @oobretlen:	number of oob bytes written/read
  * @ooboffs:	offset of oob data in the oob area (only relevant when
- *		mode = MTD_OOB_PLACE)
+ *		mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
  *
@@ -100,7 +87,7 @@
  * OOB area.
  */
 struct mtd_oob_ops {
-	mtd_oob_mode_t	mode;
+	unsigned int	mode;
 	size_t		len;
 	size_t		retlen;
 	size_t		ooblen;
@@ -125,6 +112,8 @@
 	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
 };
 
+struct module;	/* only needed for owner field in mtd_info */
+
 struct mtd_info {
 	u_char type;
 	uint32_t flags;
@@ -172,7 +161,7 @@
 	const char *name;
 	int index;
 
-	/* ecc layout structure pointer - read only ! */
+	/* ECC layout structure pointer - read only! */
 	struct nand_ecclayout *ecclayout;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
@@ -323,10 +312,15 @@
 	/* Kernel-side ioctl definitions */
 
 struct mtd_partition;
+struct mtd_part_parser_data;
 
-extern int mtd_device_register(struct mtd_info *master,
-			       const struct mtd_partition *parts,
-			       int nr_parts);
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+			      const char **part_probe_types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *defparts,
+			      int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts)	\
+	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
 extern int mtd_device_unregister(struct mtd_info *master);
 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
 extern int __get_mtd_device(struct mtd_info *mtd);
@@ -355,27 +349,16 @@
 
 void mtd_erase_callback(struct erase_info *instr);
 
-/*
- * Debugging macro and defines
- */
-#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */
-#define MTD_DEBUG_LEVEL1	(1)	/* Audible */
-#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */
-#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
+static inline int mtd_is_bitflip(int err) {
+	return err == -EUCLEAN;
+}
 
-#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...)				\
-	do {						\
-		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
-			printk(KERN_INFO args);		\
-	} while(0)
-#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...)				\
-	do {						\
-		if (0)					\
-			printk(KERN_INFO args);		\
-	} while(0)
+static inline int mtd_is_eccerr(int err) {
+	return err == -EBADMSG;
+}
 
-#endif /* CONFIG_MTD_DEBUG */
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
 
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c2b9ac4..904131b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -42,10 +42,10 @@
 /* Internal helper for board drivers which need to override command function */
 extern void nand_wait_ready(struct mtd_info *mtd);
 
-/* locks all blockes present in the device */
+/* locks all blocks present in the device */
 extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
-/* unlocks specified locked blockes */
+/* unlocks specified locked blocks */
 extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 
 /* The maximum number of NAND chips in an array */
@@ -150,7 +150,7 @@
 #define NAND_ECC_READ		0
 /* Reset Hardware ECC for write */
 #define NAND_ECC_WRITE		1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
 /* Bit mask for flags passed to do_nand_read_ecc */
@@ -163,7 +163,7 @@
  */
 /* Chip can not auto increment pages */
 #define NAND_NO_AUTOINCR	0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */
 #define NAND_NO_PADDING		0x00000004
@@ -219,27 +219,15 @@
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
 
 /* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT	0x00010000
 /* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN	0x00020000
+#define NAND_SKIP_BBTSCAN	0x00010000
 /*
  * This option is defined if the board driver allocates its own buffers
  * (e.g. because it needs them DMA-coherent).
  */
-#define NAND_OWN_BUFFERS	0x00040000
+#define NAND_OWN_BUFFERS	0x00020000
 /* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV	0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB	0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT		0x01000000
+#define NAND_SCAN_SILENT_NODEV	0x00040000
 
 /* Options set by nand scan */
 /* Nand scan has allocated controller struct */
@@ -331,27 +319,29 @@
 };
 
 /**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode:	ecc mode
- * @steps:	number of ecc steps per page
- * @size:	data bytes per ecc step
- * @bytes:	ecc bytes per step
- * @total:	total number of ecc bytes per page
- * @prepad:	padding information for syndrome based ecc generators
- * @postpad:	padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode:	ECC mode
+ * @steps:	number of ECC steps per page
+ * @size:	data bytes per ECC step
+ * @bytes:	ECC bytes per step
+ * @total:	total number of ECC bytes per page
+ * @prepad:	padding information for syndrome based ECC generators
+ * @postpad:	padding information for syndrome based ECC generators
  * @layout:	ECC layout control struct pointer
- * @priv:	pointer to private ecc control data
- * @hwctl:	function to control hardware ecc generator. Must only
+ * @priv:	pointer to private ECC control data
+ * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
- * @calculate:	function for ecc calculation or readback from ecc hardware
- * @correct:	function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate:	function for ECC calculation or readback from ECC hardware
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
  * @read_page_raw:	function to read a raw page without ECC
  * @write_page_raw:	function to write a raw page without ECC
- * @read_page:	function to read a page according to the ecc generator
+ * @read_page:	function to read a page according to the ECC generator
  *		requirements.
  * @read_subpage:	function to read parts of the page covered by ECC.
- * @write_page:	function to write a page according to the ecc generator
+ * @write_page:	function to write a page according to the ECC generator
  *		requirements.
+ * @write_oob_raw:	function to write chip OOB data without ECC
+ * @read_oob_raw:	function to read chip OOB data without ECC
  * @read_oob:	function to read chip OOB data
  * @write_oob:	function to write chip OOB data
  */
@@ -380,6 +370,10 @@
 			uint32_t offs, uint32_t len, uint8_t *buf);
 	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf);
+	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page, int sndcmd);
 	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
 			int sndcmd);
 	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -388,8 +382,8 @@
 
 /**
  * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ecc
- * @ecccode:	buffer for ecc read from flash
+ * @ecccalc:	buffer for calculated ECC
+ * @ecccode:	buffer for ECC read from flash
  * @databuf:	buffer for data - dynamically sized
  *
  * Do not change the order of buffers. databuf and oobrbuf must be in
@@ -422,7 +416,7 @@
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
  *			device ready/busy line. If set to NULL no access to
  *			ready/busy is available and the ready/busy information
  *			is read from the chip status register.
@@ -430,17 +424,17 @@
  *			commands to the chip.
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
  *			ready.
- * @ecc:		[BOARDSPECIFIC] ecc control ctructure
+ * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
- * @ops:		oob operation operands
  * @erase_cmd:		[INTERN] erase command write function, selectable due
  *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
- * @oob_poi:		poison value buffer
+ * @oob_poi:		"poison value buffer," used for laying out OOB data
+ *			before writing
  * @page_shift:		[INTERN] number of address bits in a page (column
  *			address bits).
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
@@ -449,6 +443,9 @@
  * @options:		[BOARDSPECIFIC] various chip options. They can partly
  *			be set to inform nand_scan about special functionality.
  *			See the defines for further explanation.
+ * @bbt_options:	[INTERN] bad block specific options. All options used
+ *			here must come from bbm.h. By default, these options
+ *			will be copied to the appropriate nand_bbt_descr's.
  * @badblockpos:	[INTERN] position of the bad block marker in the oob
  *			area.
  * @badblockbits:	[INTERN] number of bits to left-shift the bad block
@@ -464,7 +461,7 @@
  *			non 0 if ONFI supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
- * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
+ * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -472,9 +469,9 @@
  * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
  *			bad block scan.
  * @controller:		[REPLACEABLE] a pointer to a hardware controller
- *			structure which is shared among multiple independend
+ *			structure which is shared among multiple independent
  *			devices.
- * @priv:		[OPTIONAL] pointer to private chip date
+ * @priv:		[OPTIONAL] pointer to private chip data
  * @errstat:		[OPTIONAL] hardware specific function to perform
  *			additional error status checks (determine if errors are
  *			correctable).
@@ -509,6 +506,7 @@
 
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 
 	int page_shift;
 	int phys_erase_shift;
@@ -536,8 +534,6 @@
 	struct nand_buffers *buffers;
 	struct nand_hw_control hwcontrol;
 
-	struct mtd_oob_ops ops;
-
 	uint8_t *bbt;
 	struct nand_bbt_descr *bbt_td;
 	struct nand_bbt_descr *bbt_md;
@@ -611,10 +607,9 @@
  * @partitions:		mtd partition list
  * @chip_delay:		R/B delay value in us
  * @options:		Option flags, e.g. 16bit buswidth
- * @ecclayout:		ecc layout info structure
+ * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout:		ECC layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
- * @set_parts:		platform specific function to set partitions
- * @priv:		hardware controller specific settings
  */
 struct platform_nand_chip {
 	int nr_chips;
@@ -624,9 +619,8 @@
 	struct nand_ecclayout *ecclayout;
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 	const char **part_probe_types;
-	void (*set_parts)(uint64_t size, struct platform_nand_chip *chip);
-	void *priv;
 };
 
 /* Keep gcc happy */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 52b6f18..4596503 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -184,6 +184,9 @@
 #define ONENAND_IS_CACHE_PROGRAM(this)					\
 	(this->options & ONENAND_HAS_CACHE_PROGRAM)
 
+#define ONENAND_IS_NOP_1(this)						\
+	(this->options & ONENAND_HAS_NOP_1)
+
 /* Check byte access in OneNAND */
 #define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
 
@@ -195,6 +198,7 @@
 #define ONENAND_HAS_2PLANE		(0x0004)
 #define ONENAND_HAS_4KB_PAGE		(0x0008)
 #define ONENAND_HAS_CACHE_PROGRAM	(0x0010)
+#define ONENAND_HAS_NOP_1		(0x0020)
 #define ONENAND_SKIP_UNLOCK_CHECK	(0x0100)
 #define ONENAND_PAGEBUF_ALLOC		(0x1000)
 #define ONENAND_OOBBUF_ALLOC		(0x2000)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3a6f037..2475228 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -24,7 +24,9 @@
  * 	will extend to the end of the master MTD device.
  * offset: absolute starting position within the master MTD device; if
  * 	defined as MTDPART_OFS_APPEND, the partition will start where the
- * 	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ *	after the end of partition.
  * mask_flags: contains flags that have to be masked (removed) from the
  * 	master MTD flag set for the corresponding MTD partition.
  * 	For example, to force a read-only partition, simply adding
@@ -42,12 +44,25 @@
 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
 };
 
+#define MTDPART_OFS_RETAIN	(-3)
 #define MTDPART_OFS_NXTBLK	(-2)
 #define MTDPART_OFS_APPEND	(-1)
 #define MTDPART_SIZ_FULL	(0)
 
 
 struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+	unsigned long origin;
+	struct device_node *of_node;
+};
+
 
 /*
  * Functions dealing with the various ways of partitioning the space
@@ -57,37 +72,12 @@
 	struct list_head list;
 	struct module *owner;
 	const char *name;
-	int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+			struct mtd_part_parser_data *);
 };
 
 extern int register_mtd_parser(struct mtd_part_parser *parser);
 extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
-				struct mtd_partition **pparts, unsigned long origin);
-
-#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
-
-struct device;
-struct device_node;
-
-#ifdef CONFIG_MTD_OF_PARTS
-int __devinit of_mtd_parse_partitions(struct device *dev,
-                                      struct device_node *node,
-                                      struct mtd_partition **pparts);
-#else
-static inline int of_mtd_parse_partitions(struct device *dev,
-					  struct device_node *node,
-					  struct mtd_partition **pparts)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static inline int mtd_has_cmdlinepart(void) { return 1; }
-#else
-static inline int mtd_has_cmdlinepart(void) { return 0; }
-#endif
 
 int mtd_is_partition(struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, char *name,
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index e5f21d2..04e0181 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -32,21 +32,4 @@
 	struct mtd_partition	*parts;
 };
 
-/*
- * Board needs to specify the exact mapping during their setup time.
- */
-void physmap_configure(unsigned long addr, unsigned long size,
-		int bankwidth, void (*set_vpp)(struct map_info *, int) );
-
-/*
- * Machines that wish to do flash partition may want to call this function in
- * their setup routine.
- *
- *	physmap_set_partitions(mypartitions, num_parts);
- *
- * Note that one can always override this hard-coded partition with
- * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS).
- */
-void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
-
 #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cbeb586..a82ad4d 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2536,6 +2536,8 @@
 extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
 extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
 extern void dev_seq_stop(struct seq_file *seq, void *v);
+extern int dev_seq_open_ops(struct inode *inode, struct file *file,
+			    const struct seq_operations *ops);
 #endif
 
 extern int netdev_class_create_file(struct class_attribute *class_attr);
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
index f9930c8..c3b4548 100644
--- a/include/linux/netfilter_ipv4/Kbuild
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -12,3 +12,4 @@
 header-y += ipt_ecn.h
 header-y += ipt_realm.h
 header-y += ipt_ttl.h
+header-y += nf_nat.h
diff --git a/include/linux/netfilter_ipv4/nf_nat.h b/include/linux/netfilter_ipv4/nf_nat.h
new file mode 100644
index 0000000..7a861d0
--- /dev/null
+++ b/include/linux/netfilter_ipv4/nf_nat.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_NF_NAT_H
+#define _LINUX_NF_NAT_H
+
+#include <linux/types.h>
+
+#define IP_NAT_RANGE_MAP_IPS 1
+#define IP_NAT_RANGE_PROTO_SPECIFIED 2
+#define IP_NAT_RANGE_PROTO_RANDOM 4
+#define IP_NAT_RANGE_PERSISTENT 8
+
+/* The protocol-specific manipulable parts of the tuple. */
+union nf_conntrack_man_proto {
+	/* Add other protocols here. */
+	__be16 all;
+
+	struct {
+		__be16 port;
+	} tcp;
+	struct {
+		__be16 port;
+	} udp;
+	struct {
+		__be16 id;
+	} icmp;
+	struct {
+		__be16 port;
+	} dccp;
+	struct {
+		__be16 port;
+	} sctp;
+	struct {
+		__be16 key;	/* GRE key is 32bit, PPtP only uses 16bit */
+	} gre;
+};
+
+/* Single range specification. */
+struct nf_nat_range {
+	/* Set to OR of flags above. */
+	unsigned int flags;
+
+	/* Inclusive: network order. */
+	__be32 min_ip, max_ip;
+
+	/* Inclusive: network order */
+	union nf_conntrack_man_proto min, max;
+};
+
+/* For backwards compat: don't use in modern code. */
+struct nf_nat_multi_range_compat {
+	unsigned int rangesize; /* Must be 1. */
+
+	/* hangs off end. */
+	struct nf_nat_range range[1];
+};
+
+#define nf_nat_multi_range nf_nat_multi_range_compat
+
+#endif
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 60a137b..92ecf55 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -229,6 +229,7 @@
 #define NFS_INO_COMMIT		(7)		/* inode is committing unstable writes */
 #define NFS_INO_PNFS_COMMIT	(8)		/* use pnfs code for commit */
 #define NFS_INO_LAYOUTCOMMIT	(9)		/* layoutcommit required */
+#define NFS_INO_LAYOUTCOMMITTING (10)		/* layoutcommit inflight */
 
 static inline struct nfs_inode *NFS_I(const struct inode *inode)
 {
@@ -409,6 +410,9 @@
 extern const struct inode_operations nfs3_file_inode_operations;
 #endif /* CONFIG_NFS_V3 */
 extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
 extern const struct address_space_operations nfs_file_aops;
 extern const struct address_space_operations nfs_dir_aops;
 
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index c74595b..2a7c533 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1192,6 +1192,7 @@
 	const struct dentry_operations *dentry_ops;
 	const struct inode_operations *dir_inode_ops;
 	const struct inode_operations *file_inode_ops;
+	const struct file_operations *file_ops;
 
 	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
 			    struct nfs_fsinfo *);
diff --git a/include/linux/of.h b/include/linux/of.h
index f01ba8a..4948552 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 
 #include <asm/byteorder.h>
+#include <asm/errno.h>
 
 typedef u32 phandle;
 typedef u32 ihandle;
@@ -321,6 +322,16 @@
 	return NULL;
 }
 
+static inline int of_alias_get_id(struct device_node *np, const char *stem)
+{
+	return -ENOSYS;
+}
+
+static inline int of_machine_is_compatible(const char *compat)
+{
+	return 0;
+}
+
 #define of_match_ptr(_ptr)	NULL
 #define of_match_node(_matches, _node)	NULL
 #endif /* CONFIG_OF */
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 5a6f458..040ce2f 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -12,7 +12,6 @@
  */
 
 #ifdef CONFIG_OF_DEVICE
-#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/pm.h>
diff --git a/include/linux/opp.h b/include/linux/opp.h
index 87a9208..ee94b33 100644
--- a/include/linux/opp.h
+++ b/include/linux/opp.h
@@ -97,11 +97,11 @@
 	return 0;
 }
 
-struct srcu_notifier_head *opp_get_notifier(struct device *dev)
+static inline struct srcu_notifier_head *opp_get_notifier(struct device *dev)
 {
 	return ERR_PTR(-EINVAL);
 }
-#endif		/* CONFIG_PM */
+#endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
 int opp_init_cpufreq_table(struct device *dev,
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index e3d0b38..7ef6872 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -12,7 +12,7 @@
 	unsigned int is_enabled:1;      /* Enable bit is set */
 };
 
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
 
 extern int pci_enable_ats(struct pci_dev *dev, int ps);
 extern void pci_disable_ats(struct pci_dev *dev);
@@ -29,7 +29,7 @@
 	return dev->ats && dev->ats->is_enabled;
 }
 
-#else /* CONFIG_PCI_IOV */
+#else /* CONFIG_PCI_ATS */
 
 static inline int pci_enable_ats(struct pci_dev *dev, int ps)
 {
@@ -50,7 +50,7 @@
 	return 0;
 }
 
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_ATS */
 
 #ifdef CONFIG_PCI_PRI
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 337df0d5..7cda65b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -338,7 +338,7 @@
 	struct list_head msi_list;
 #endif
 	struct pci_vpd *vpd;
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
 	union {
 		struct pci_sriov *sriov;	/* SR-IOV capability related */
 		struct pci_dev *physfn;	/* the PF this VF is associated with */
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 5d09cba..45fc162 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -132,13 +132,9 @@
 extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
 						 struct hotplug_slot_info *info);
 
-static inline int pci_hp_register(struct hotplug_slot *slot,
-				  struct pci_bus *pbus,
-				  int devnr, const char *name)
-{
-	return __pci_hp_register(slot, pbus, devnr, name,
-				 THIS_MODULE, KBUILD_MODNAME);
-}
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define pci_hp_register(slot, pbus, devnr, name) \
+	__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
 
 /* PCI Setting Record (Type 0) */
 struct hpp_type0 {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1679ff6..172ba70 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2405,6 +2405,8 @@
 
 #define PCI_VENDOR_ID_AZWAVE		0x1a3b
 
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
@@ -2873,3 +2875,5 @@
 
 #define PCI_VENDOR_ID_XEN		0x5853
 #define PCI_DEVICE_ID_XEN_PLATFORM	0x0001
+
+#define PCI_VENDOR_ID_OCZ		0x1b85
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 3605e94..04c0110 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -121,6 +121,7 @@
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else
 
+struct pinctrl_dev;
 
 /* Sufficiently stupid default function when pinctrl is not in use */
 static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index c533670..7281d5a 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -30,7 +30,7 @@
  */
 
 struct tc_stats {
-	__u64	bytes;			/* NUmber of enqueues bytes */
+	__u64	bytes;			/* Number of enqueued bytes */
 	__u32	packets;		/* Number of enqueued packets	*/
 	__u32	drops;			/* Packets dropped because of lack of resources */
 	__u32	overlimits;		/* Number of throttle events when this
@@ -297,7 +297,7 @@
 	__u32 debug;		/* debug flags */
 
 	/* stats */
-	__u32 direct_pkts; /* count of non shapped packets */
+	__u32 direct_pkts; /* count of non shaped packets */
 };
 enum {
 	TCA_HTB_UNSPEC,
@@ -503,7 +503,7 @@
 };
 #define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
 
-/* State transition probablities for 4 state model */
+/* State transition probabilities for 4 state model */
 struct tc_netem_gimodel {
 	__u32	p13;
 	__u32	p31;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index f15acb6..3f3ed83 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -54,118 +54,145 @@
 /**
  * struct dev_pm_ops - device PM callbacks
  *
- * Several driver power state transitions are externally visible, affecting
+ * Several device power state transitions are externally visible, affecting
  * the state of pending I/O queues and (for drivers that touch hardware)
  * interrupts, wakeups, DMA, and other hardware state.  There may also be
- * internal transitions to various low power modes, which are transparent
+ * internal transitions to various low-power modes which are transparent
  * to the rest of the driver stack (such as a driver that's ON gating off
  * clocks which are not in active use).
  *
- * The externally visible transitions are handled with the help of the following
- * callbacks included in this structure:
+ * The externally visible transitions are handled with the help of callbacks
+ * included in this structure in such a way that two levels of callbacks are
+ * involved.  First, the PM core executes callbacks provided by PM domains,
+ * device types, classes and bus types.  They are the subsystem-level callbacks
+ * supposed to execute callbacks provided by device drivers, although they may
+ * choose not to do that.  If the driver callbacks are executed, they have to
+ * collaborate with the subsystem-level callbacks to achieve the goals
+ * appropriate for the given system transition, given transition phase and the
+ * subsystem the device belongs to.
  *
- * @prepare: Prepare the device for the upcoming transition, but do NOT change
- *	its hardware state.  Prevent new children of the device from being
- *	registered after @prepare() returns (the driver's subsystem and
- *	generally the rest of the kernel is supposed to prevent new calls to the
- *	probe method from being made too once @prepare() has succeeded).  If
- *	@prepare() detects a situation it cannot handle (e.g. registration of a
- *	child already in progress), it may return -EAGAIN, so that the PM core
- *	can execute it once again (e.g. after the new child has been registered)
- *	to recover from the race condition.  This method is executed for all
- *	kinds of suspend transitions and is followed by one of the suspend
- *	callbacks: @suspend(), @freeze(), or @poweroff().
- *	The PM core executes @prepare() for all devices before starting to
- *	execute suspend callbacks for any of them, so drivers may assume all of
- *	the other devices to be present and functional while @prepare() is being
- *	executed.  In particular, it is safe to make GFP_KERNEL memory
- *	allocations from within @prepare().  However, drivers may NOT assume
- *	anything about the availability of the user space at that time and it
- *	is not correct to request firmware from within @prepare() (it's too
- *	late to do that).  [To work around this limitation, drivers may
- *	register suspend and hibernation notifiers that are executed before the
- *	freezing of tasks.]
+ * @prepare: The principal role of this callback is to prevent new children of
+ *	the device from being registered after it has returned (the driver's
+ *	subsystem and generally the rest of the kernel is supposed to prevent
+ *	new calls to the probe method from being made too once @prepare() has
+ *	succeeded).  If @prepare() detects a situation it cannot handle (e.g.
+ *	registration of a child already in progress), it may return -EAGAIN, so
+ *	that the PM core can execute it once again (e.g. after a new child has
+ *	been registered) to recover from the race condition.
+ *	This method is executed for all kinds of suspend transitions and is
+ *	followed by one of the suspend callbacks: @suspend(), @freeze(), or
+ *	@poweroff().  The PM core executes subsystem-level @prepare() for all
+ *	devices before starting to invoke suspend callbacks for any of them, so
+ *	generally devices may be assumed to be functional or to respond to
+ *	runtime resume requests while @prepare() is being executed.  However,
+ *	device drivers may NOT assume anything about the availability of user
+ *	space at that time and it is NOT valid to request firmware from within
+ *	@prepare() (it's too late to do that).  It also is NOT valid to allocate
+ *	substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
+ *	[To work around these limitations, drivers may register suspend and
+ *	hibernation notifiers to be executed before the freezing of tasks.]
  *
  * @complete: Undo the changes made by @prepare().  This method is executed for
  *	all kinds of resume transitions, following one of the resume callbacks:
  *	@resume(), @thaw(), @restore().  Also called if the state transition
- *	fails before the driver's suspend callback (@suspend(), @freeze(),
- *	@poweroff()) can be executed (e.g. if the suspend callback fails for one
+ *	fails before the driver's suspend callback: @suspend(), @freeze() or
+ *	@poweroff(), can be executed (e.g. if the suspend callback fails for one
  *	of the other devices that the PM core has unsuccessfully attempted to
  *	suspend earlier).
- *	The PM core executes @complete() after it has executed the appropriate
- *	resume callback for all devices.
+ *	The PM core executes subsystem-level @complete() after it has executed
+ *	the appropriate resume callbacks for all devices.
  *
  * @suspend: Executed before putting the system into a sleep state in which the
- *	contents of main memory are preserved.  Quiesce the device, put it into
- *	a low power state appropriate for the upcoming system state (such as
- *	PCI_D3hot), and enable wakeup events as appropriate.
+ *	contents of main memory are preserved.  The exact action to perform
+ *	depends on the device's subsystem (PM domain, device type, class or bus
+ *	type), but generally the device must be quiescent after subsystem-level
+ *	@suspend() has returned, so that it doesn't do any I/O or DMA.
+ *	Subsystem-level @suspend() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
  *
  * @resume: Executed after waking the system up from a sleep state in which the
- *	contents of main memory were preserved.  Put the device into the
- *	appropriate state, according to the information saved in memory by the
- *	preceding @suspend().  The driver starts working again, responding to
- *	hardware events and software requests.  The hardware may have gone
- *	through a power-off reset, or it may have maintained state from the
- *	previous suspend() which the driver may rely on while resuming.  On most
- *	platforms, there are no restrictions on availability of resources like
- *	clocks during @resume().
+ *	contents of main memory were preserved.  The exact action to perform
+ *	depends on the device's subsystem, but generally the driver is expected
+ *	to start working again, responding to hardware events and software
+ *	requests (the device itself may be left in a low-power state, waiting
+ *	for a runtime resume to occur).  The state of the device at the time its
+ *	driver's @resume() callback is run depends on the platform and subsystem
+ *	the device belongs to.  On most platforms, there are no restrictions on
+ *	availability of resources like clocks during @resume().
+ *	Subsystem-level @resume() is executed for all devices after invoking
+ *	subsystem-level @resume_noirq() for all of them.
  *
  * @freeze: Hibernation-specific, executed before creating a hibernation image.
- *	Quiesce operations so that a consistent image can be created, but do NOT
- *	otherwise put the device into a low power device state and do NOT emit
- *	system wakeup events.  Save in main memory the device settings to be
- *	used by @restore() during the subsequent resume from hibernation or by
- *	the subsequent @thaw(), if the creation of the image or the restoration
- *	of main memory contents from it fails.
+ *	Analogous to @suspend(), but it should not enable the device to signal
+ *	wakeup events or change its power state.  The majority of subsystems
+ *	(with the notable exception of the PCI bus type) expect the driver-level
+ *	@freeze() to save the device settings in memory to be used by @restore()
+ *	during the subsequent resume from hibernation.
+ *	Subsystem-level @freeze() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
  *
  * @thaw: Hibernation-specific, executed after creating a hibernation image OR
- *	if the creation of the image fails.  Also executed after a failing
+ *	if the creation of an image has failed.  Also executed after a failing
  *	attempt to restore the contents of main memory from such an image.
  *	Undo the changes made by the preceding @freeze(), so the device can be
  *	operated in the same way as immediately before the call to @freeze().
+ *	Subsystem-level @thaw() is executed for all devices after invoking
+ *	subsystem-level @thaw_noirq() for all of them.  It also may be executed
+ *	directly after @freeze() in case of a transition error.
  *
  * @poweroff: Hibernation-specific, executed after saving a hibernation image.
- *	Quiesce the device, put it into a low power state appropriate for the
- *	upcoming system state (such as PCI_D3hot), and enable wakeup events as
- *	appropriate.
+ *	Analogous to @suspend(), but it need not save the device's settings in
+ *	memory.
+ *	Subsystem-level @poweroff() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
  *
  * @restore: Hibernation-specific, executed after restoring the contents of main
- *	memory from a hibernation image.  Driver starts working again,
- *	responding to hardware events and software requests.  Drivers may NOT
- *	make ANY assumptions about the hardware state right prior to @restore().
- *	On most platforms, there are no restrictions on availability of
- *	resources like clocks during @restore().
+ *	memory from a hibernation image, analogous to @resume().
  *
- * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
- *	actions required for suspending the device that need interrupts to be
- *	disabled
+ * @suspend_noirq: Complete the actions started by @suspend().  Carry out any
+ *	additional operations required for suspending the device that might be
+ *	racing with its driver's interrupt handler, which is guaranteed not to
+ *	run while @suspend_noirq() is being executed.
+ *	It generally is expected that the device will be in a low-power state
+ *	(appropriate for the target system sleep state) after subsystem-level
+ *	@suspend_noirq() has returned successfully.  If the device can generate
+ *	system wakeup signals and is enabled to wake up the system, it should be
+ *	configured to do so at that time.  However, depending on the platform
+ *	and device's subsystem, @suspend() may be allowed to put the device into
+ *	the low-power state and configure it to generate wakeup signals, in
+ *	which case it generally is not necessary to define @suspend_noirq().
  *
- * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
- *	actions required for resuming the device that need interrupts to be
- *	disabled
+ * @resume_noirq: Prepare for the execution of @resume() by carrying out any
+ *	operations required for resuming the device that might be racing with
+ *	its driver's interrupt handler, which is guaranteed not to run while
+ *	@resume_noirq() is being executed.
  *
- * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
- *	actions required for freezing the device that need interrupts to be
- *	disabled
+ * @freeze_noirq: Complete the actions started by @freeze().  Carry out any
+ *	additional operations required for freezing the device that might be
+ *	racing with its driver's interrupt handler, which is guaranteed not to
+ *	run while @freeze_noirq() is being executed.
+ *	The power state of the device should not be changed by either @freeze()
+ *	or @freeze_noirq() and it should not be configured to signal system
+ *	wakeup by any of these callbacks.
  *
- * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
- *	actions required for thawing the device that need interrupts to be
- *	disabled
+ * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
+ *	operations required for thawing the device that might be racing with its
+ *	driver's interrupt handler, which is guaranteed not to run while
+ *	@thaw_noirq() is being executed.
  *
- * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
- *	actions required for handling the device that need interrupts to be
- *	disabled
+ * @poweroff_noirq: Complete the actions started by @poweroff().  Analogous to
+ *	@suspend_noirq(), but it need not save the device's settings in memory.
  *
- * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
- *	actions required for restoring the operations of the device that need
- *	interrupts to be disabled
+ * @restore_noirq: Prepare for the execution of @restore() by carrying out any
+ *	operations required for thawing the device that might be racing with its
+ *	driver's interrupt handler, which is guaranteed not to run while
+ *	@restore_noirq() is being executed.  Analogous to @resume_noirq().
  *
  * All of the above callbacks, except for @complete(), return error codes.
  * However, the error codes returned by the resume operations, @resume(),
- * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do
+ * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
  * not cause the PM core to abort the resume transition during which they are
- * returned.  The error codes returned in that cases are only printed by the PM
+ * returned.  The error codes returned in those cases are only printed by the PM
  * core to the system logs for debugging purposes.  Still, it is recommended
  * that drivers only return error codes from their resume methods in case of an
  * unrecoverable failure (i.e. when the device being handled refuses to resume
@@ -174,31 +201,43 @@
  * their children.
  *
  * It is allowed to unregister devices while the above callbacks are being
- * executed.  However, it is not allowed to unregister a device from within any
- * of its own callbacks.
+ * executed.  However, a callback routine must NOT try to unregister the device
+ * it was called for, although it may unregister children of that device (for
+ * example, if it detects that a child was unplugged while the system was
+ * asleep).
  *
- * There also are the following callbacks related to run-time power management
- * of devices:
+ * Refer to Documentation/power/devices.txt for more information about the role
+ * of the above callbacks in the system suspend process.
+ *
+ * There also are callbacks related to runtime power management of devices.
+ * Again, these callbacks are executed by the PM core only for subsystems
+ * (PM domains, device types, classes and bus types) and the subsystem-level
+ * callbacks are supposed to invoke the driver callbacks.  Moreover, the exact
+ * actions to be performed by a device driver's callbacks generally depend on
+ * the platform and subsystem the device belongs to.
  *
  * @runtime_suspend: Prepare the device for a condition in which it won't be
  *	able to communicate with the CPU(s) and RAM due to power management.
- *	This need not mean that the device should be put into a low power state.
+ *	This need not mean that the device should be put into a low-power state.
  *	For example, if the device is behind a link which is about to be turned
  *	off, the device may remain at full power.  If the device does go to low
- *	power and is capable of generating run-time wake-up events, remote
- *	wake-up (i.e., a hardware mechanism allowing the device to request a
- *	change of its power state via a wake-up event, such as PCI PME) should
- *	be enabled for it.
+ *	power and is capable of generating runtime wakeup events, remote wakeup
+ *	(i.e., a hardware mechanism allowing the device to request a change of
+ *	its power state via an interrupt) should be enabled for it.
  *
  * @runtime_resume: Put the device into the fully active state in response to a
- *	wake-up event generated by hardware or at the request of software.  If
- *	necessary, put the device into the full power state and restore its
+ *	wakeup event generated by hardware or at the request of software.  If
+ *	necessary, put the device into the full-power state and restore its
  *	registers, so that it is fully operational.
  *
- * @runtime_idle: Device appears to be inactive and it might be put into a low
- *	power state if all of the necessary conditions are satisfied.  Check
+ * @runtime_idle: Device appears to be inactive and it might be put into a
+ *	low-power state if all of the necessary conditions are satisfied.  Check
  *	these conditions and handle the device as appropriate, possibly queueing
  *	a suspend request for it.  The return value is ignored by the PM core.
+ *
+ * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * role of the above callbacks in device runtime power management.
+ *
  */
 
 struct dev_pm_ops {
@@ -447,6 +486,7 @@
 	unsigned int		async_suspend:1;
 	bool			is_prepared:1;	/* Owned by the PM core */
 	bool			is_suspended:1;	/* Ditto */
+	bool			ignore_children:1;
 	spinlock_t		lock;
 #ifdef CONFIG_PM_SLEEP
 	struct list_head	entry;
@@ -464,7 +504,6 @@
 	atomic_t		usage_count;
 	atomic_t		child_count;
 	unsigned int		disable_depth:3;
-	unsigned int		ignore_children:1;
 	unsigned int		idle_notification:1;
 	unsigned int		request_pending:1;
 	unsigned int		deferred_resume:1;
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 70b2840..d3085e7 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -10,6 +10,7 @@
 #define _LINUX_PM_RUNTIME_H
 
 #include <linux/device.h>
+#include <linux/notifier.h>
 #include <linux/pm.h>
 
 #include <linux/jiffies.h>
@@ -51,11 +52,6 @@
 		|| !atomic_read(&dev->power.child_count);
 }
 
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
-	dev->power.ignore_children = enable;
-}
-
 static inline void pm_runtime_get_noresume(struct device *dev)
 {
 	atomic_inc(&dev->power.usage_count);
@@ -129,7 +125,6 @@
 static inline void pm_runtime_forbid(struct device *dev) {}
 
 static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
 static inline void pm_runtime_get_noresume(struct device *dev) {}
 static inline void pm_runtime_put_noidle(struct device *dev) {}
 static inline bool device_run_wake(struct device *dev) { return false; }
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index ea56732..2ca8cde 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -35,10 +35,12 @@
 	spinlock_t	buf_lock;	/* serialize access to 'buf' */
 	char		*buf;
 	size_t		bufsize;
+	struct mutex	read_mutex;	/* serialize open/read/close */
 	int		(*open)(struct pstore_info *psi);
 	int		(*close)(struct pstore_info *psi);
 	ssize_t		(*read)(u64 *id, enum pstore_type_id *type,
-			struct timespec *time, struct pstore_info *psi);
+			struct timespec *time, char **buf,
+			struct pstore_info *psi);
 	int		(*write)(enum pstore_type_id type, u64 *id,
 			unsigned int part, size_t size, struct pstore_info *psi);
 	int		(*erase)(enum pstore_type_id type, u64 id,
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 3daac2d..690276a 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -15,8 +15,8 @@
 
 #include <linux/device.h>
 #include <linux/list.h>
-#include <linux/module.h>
 
+struct module;
 struct i2c_client;
 struct spi_device;
 
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 12a1aa0..52c89ae 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -16,6 +16,7 @@
 #define __LINUX_REGULATOR_DRIVER_H_
 
 #include <linux/device.h>
+#include <linux/notifier.h>
 #include <linux/regulator/consumer.h>
 
 struct regulator_dev;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e8acce7..1c4f3e9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1521,7 +1521,13 @@
 #ifdef CONFIG_FAULT_INJECTION
 	int make_it_fail;
 #endif
-	struct prop_local_single dirties;
+	/*
+	 * when (nr_dirtied >= nr_dirtied_pause), it's time to call
+	 * balance_dirty_pages() for some dirty throttling pause
+	 */
+	int nr_dirtied;
+	int nr_dirtied_pause;
+
 #ifdef CONFIG_LATENCYTOP
 	int latency_record_count;
 	struct latency_record latency_record[LT_SAVECOUNT];
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 97ff8e2..3d86517 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -207,13 +207,15 @@
 
 struct serial_rs485 {
 	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)
-#define SER_RS485_RTS_ON_SEND		(1 << 1)
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
-#define SER_RS485_RTS_BEFORE_SEND	(1 << 3)
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
 #define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Milliseconds */
-	__u32	delay_rts_after_send;	/* Milliseconds */
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
 	__u32	padding[5];		/* Memory is cheap, new structs
 					   are a royal PITA .. */
 };
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 8bffe9a..369273a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -67,6 +67,7 @@
 	SCIx_IRDA_REGTYPE,
 	SCIx_SCIFA_REGTYPE,
 	SCIx_SCIFB_REGTYPE,
+	SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH3_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
@@ -131,8 +132,6 @@
 
 	struct plat_sci_port_ops	*ops;
 
-	struct device	*dma_dev;
-
 	unsigned int	dma_slave_tx;
 	unsigned int	dma_slave_rx;
 };
diff --git a/include/linux/serio.h b/include/linux/serio.h
index be7dfb0..ca82861 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -79,19 +79,21 @@
 irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags);
 
 void __serio_register_port(struct serio *serio, struct module *owner);
-static inline void serio_register_port(struct serio *serio)
-{
-	__serio_register_port(serio, THIS_MODULE);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define serio_register_port(serio) \
+	__serio_register_port(serio, THIS_MODULE)
 
 void serio_unregister_port(struct serio *serio);
 void serio_unregister_child_port(struct serio *serio);
 
-int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int __must_check serio_register_driver(struct serio_driver *drv)
-{
-	return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
-}
+int __must_check __serio_register_driver(struct serio_driver *drv,
+				struct module *owner, const char *mod_name);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define serio_register_driver(drv) \
+	__serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
+
 void serio_unregister_driver(struct serio_driver *drv);
 
 static inline int serio_write(struct serio *serio, unsigned char data)
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf186..a20831c 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,7 +52,6 @@
 
 	unsigned long		arch_flags;
 	void			*priv;
-	struct dentry		*dentry;
 	struct clk_mapping	*mapping;
 	struct cpufreq_frequency_table *freq_table;
 	unsigned int		nr_freqs;
@@ -94,6 +93,9 @@
 long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
 			      unsigned int div_max, unsigned long rate);
 
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate);
+
 long clk_round_parent(struct clk *clk, unsigned long target,
 		      unsigned long *best_freq, unsigned long *parent_freq,
 		      unsigned int div_min, unsigned int div_max);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 30cae70..8446789 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -61,6 +61,14 @@
 	.reg = r, .reg_width = r_width,	\
 	.enum_ids = (pinmux_enum_t [r_width]) \
 
+struct pinmux_irq {
+	int irq;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_IRQ(irq_nr, ids...)			   \
+	{ .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } }	\
+
 struct pinmux_range {
 	pinmux_enum_t begin;
 	pinmux_enum_t end;
@@ -87,11 +95,89 @@
 	pinmux_enum_t *gpio_data;
 	unsigned int gpio_data_size;
 
-	unsigned long *gpio_in_use;
+	struct pinmux_irq *gpio_irq;
+	unsigned int gpio_irq_size;
+
 	struct gpio_chip chip;
 };
 
 int register_pinmux(struct pinmux_info *pip);
 int unregister_pinmux(struct pinmux_info *pip);
 
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
+	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
+	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
+	PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+	PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx),	\
+	PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx),	\
+	PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx),	\
+	PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx),	\
+	PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str)	CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL()	CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,			\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)		\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,		\
+	0, 0, 0, 0,			\
+	0, 0, (in_pd), 0,		\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)							\
+	{								\
+		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,		\
+				PORT##nr##_FN2, PORT##nr##_FN3,		\
+				PORT##nr##_FN4, PORT##nr##_FN5,		\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
 #endif /* __SH_PFC_H */
diff --git a/include/linux/sigma.h b/include/linux/sigma.h
index e2accb3..d0de882 100644
--- a/include/linux/sigma.h
+++ b/include/linux/sigma.h
@@ -24,7 +24,7 @@
 struct sigma_firmware_header {
 	unsigned char magic[7];
 	u8 version;
-	u32 crc;
+	__le32 crc;
 };
 
 enum {
@@ -40,19 +40,14 @@
 struct sigma_action {
 	u8 instr;
 	u8 len_hi;
-	u16 len;
-	u16 addr;
+	__le16 len;
+	__be16 addr;
 	unsigned char payload[];
 };
 
 static inline u32 sigma_action_len(struct sigma_action *sa)
 {
-	return (sa->len_hi << 16) | sa->len;
-}
-
-static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len)
-{
-	return sizeof(*sa) + payload_len + (payload_len % 2);
+	return (sa->len_hi << 16) | le16_to_cpu(sa->len);
 }
 
 extern int process_sigma_firmware(struct i2c_client *client, const char *name);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 6a6b352..fe86488 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1806,12 +1806,12 @@
 
 /**
  * skb_frag_dma_map - maps a paged fragment via the DMA API
- * @device: the device to map the fragment to
+ * @dev: the device to map the fragment to
  * @frag: the paged fragment to map
  * @offset: the offset within the fragment (starting at the
  *          fragment's own offset)
  * @size: the number of bytes to map
- * @direction: the direction of the mapping (%PCI_DMA_*)
+ * @dir: the direction of the mapping (%PCI_DMA_*)
  *
  * Maps the page associated with @frag to @device.
  */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index f10ed7b..061e560 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -231,10 +231,9 @@
 #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
 
 extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-static inline int ssb_driver_register(struct ssb_driver *drv)
-{
-	return __ssb_driver_register(drv, THIS_MODULE);
-}
+#define ssb_driver_register(drv) \
+	__ssb_driver_register(drv, THIS_MODULE)
+
 extern void ssb_driver_unregister(struct ssb_driver *drv);
 
 
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 2d04ea9..c170edc 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -3,6 +3,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
+#include <linux/smp.h>
 #include <linux/list.h>
 #include <asm/system.h>
 
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 492486a..3d8f9c4 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -136,6 +136,8 @@
 void		rpc_release_client(struct rpc_clnt *);
 void		rpc_task_release_client(struct rpc_task *);
 
+int		rpcb_create_local(void);
+void		rpcb_put_local(void);
 int		rpcb_register(u32, u32, int, unsigned short);
 int		rpcb_v4_register(const u32 program, const u32 version,
 				 const struct sockaddr *address,
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index d8d5d93..35b37b1 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -413,6 +413,7 @@
 /*
  * Function prototypes.
  */
+void svc_rpcb_cleanup(struct svc_serv *serv);
 struct svc_serv *svc_create(struct svc_program *, unsigned int,
 			    void (*shutdown)(struct svc_serv *));
 struct svc_rqst *svc_prepare_thread(struct svc_serv *serv,
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index 7ad9751..8620f79 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -8,7 +8,8 @@
 #define SUNRPC_SVC_XPRT_H
 
 #include <linux/sunrpc/svc.h>
-#include <linux/module.h>
+
+struct module;
 
 struct svc_xprt_ops {
 	struct svc_xprt	*(*xpo_create)(struct svc_serv *,
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index d35e783..20f63d3 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -22,7 +22,6 @@
 #define _SYSDEV_H_
 
 #include <linux/kobject.h>
-#include <linux/module.h>
 #include <linux/pm.h>
 
 
diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h
index d9a85d6..cfaee86 100644
--- a/include/linux/textsearch.h
+++ b/include/linux/textsearch.h
@@ -4,10 +4,11 @@
 #include <linux/types.h>
 #include <linux/list.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
+struct module;
+
 struct ts_config;
 
 #define TS_AUTOLOAD	1 /* Automatically load textsearch modules when needed */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index fc839bf..e26db03 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -201,6 +201,10 @@
 	.balance_interval	= 64,					\
 }
 
+#ifndef SD_NODES_PER_DOMAIN
+#define SD_NODES_PER_DOMAIN 16
+#endif
+
 #ifdef CONFIG_SCHED_BOOK
 #ifndef SD_BOOK_INIT
 #error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index fd99ff9..1ad4724 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -14,10 +14,10 @@
 #ifndef _UIO_DRIVER_H_
 #define _UIO_DRIVER_H_
 
-#include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 
+struct module;
 struct uio_map;
 
 /**
@@ -101,11 +101,11 @@
 	__uio_register_device(struct module *owner,
 			      struct device *parent,
 			      struct uio_info *info);
-static inline int __must_check
-	uio_register_device(struct device *parent, struct uio_info *info)
-{
-	return __uio_register_device(THIS_MODULE, parent, info);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define uio_register_device(parent, info) \
+	__uio_register_device(THIS_MODULE, parent, info)
+
 extern void uio_unregister_device(struct uio_info *info);
 extern void uio_event_notify(struct uio_info *info);
 
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 6f49a1b..d3d0c13 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -946,10 +946,11 @@
  */
 extern int usb_register_driver(struct usb_driver *, struct module *,
 			       const char *);
-static inline int usb_register(struct usb_driver *driver)
-{
-	return usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
-}
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define usb_register(driver) \
+	usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
 extern void usb_deregister(struct usb_driver *);
 
 extern int usb_register_device_driver(struct usb_device_driver *,
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
index b0c564e..7dbbee9 100644
--- a/include/linux/uwb.h
+++ b/include/linux/uwb.h
@@ -33,6 +33,7 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/uwb/spec.h>
+#include <asm/page.h>
 
 struct uwb_dev;
 struct uwb_beca_e;
diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h
index 7b48420..891d1d5 100644
--- a/include/linux/uwb/umc.h
+++ b/include/linux/uwb/umc.h
@@ -111,10 +111,9 @@
  * umc_driver_register - register a UMC capabiltity driver.
  * @umc_drv:  pointer to the driver.
  */
-static inline int __must_check umc_driver_register(struct umc_driver *umc_drv)
-{
-	return __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME);
-}
+#define umc_driver_register(umc_drv) \
+	__umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
+
 void umc_driver_unregister(struct umc_driver *umc_drv);
 
 /*
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
index cf97b5b..6f8fbcf 100644
--- a/include/linux/vermagic.h
+++ b/include/linux/vermagic.h
@@ -1,5 +1,4 @@
 #include <generated/utsrelease.h>
-#include <linux/module.h>
 
 /* Simply sanity version stamp for modules. */
 #ifdef CONFIG_SMP
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 225560c..4b752d5 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -653,6 +653,10 @@
 #define V4L2_BUF_FLAG_ERROR	0x0040
 #define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
 #define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
+#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
 
 /*
  *	O V E R L A Y   P R E V I E W
@@ -1165,6 +1169,7 @@
 	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
 	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
 	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
+	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
 };
 #define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
 #define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
@@ -2138,6 +2143,23 @@
 	__u32 revision;    /* chip revision, chip specific */
 } __attribute__ ((packed));
 
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers {
+	__u32			index;
+	__u32			count;
+	enum v4l2_memory        memory;
+	struct v4l2_format	format;
+	__u32			reserved[8];
+};
+
 /*
  *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
  *
@@ -2228,6 +2250,11 @@
 #define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
 #define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
 
+/* Experimental, the below two ioctls may change over the next couple of kernel
+   versions */
+#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
+
 /* Reminder: when adding new ioctls please add support for them to
    drivers/media/video/v4l2-compat-ioctl32.c as well! */
 
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index add4790..e9e72bd 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -85,6 +85,8 @@
  * @reset: reset the device
  *	vdev: the virtio device
  *	After this, status and feature negotiation must be done again
+ *	Device must not be reset from its vq/config callbacks, or in
+ *	parallel with being added/removed.
  * @find_vqs: find virtqueues and instantiate them.
  *	vdev: the virtio_device
  *	nvqs: the number of virtqueues to find
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
index 27c7ede..5c7b6f0 100644
--- a/include/linux/virtio_mmio.h
+++ b/include/linux/virtio_mmio.h
@@ -63,7 +63,7 @@
 #define VIRTIO_MMIO_GUEST_FEATURES	0x020
 
 /* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SET	0x024
+#define VIRTIO_MMIO_GUEST_FEATURES_SEL	0x024
 
 /* Guest's memory page size in bytes - Write Only */
 #define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
diff --git a/include/linux/vlynq.h b/include/linux/vlynq.h
index 8f6a958..017d4a5 100644
--- a/include/linux/vlynq.h
+++ b/include/linux/vlynq.h
@@ -20,9 +20,10 @@
 #define __VLYNQ_H__
 
 #include <linux/device.h>
-#include <linux/module.h>
 #include <linux/types.h>
 
+struct module;
+
 #define VLYNQ_NUM_IRQS 32
 
 struct vlynq_mapping {
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 687fb11..4bde182 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -119,7 +119,7 @@
 #endif
 
 /* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
 extern void free_vm_area(struct vm_struct *area);
 
 /* for /dev/kmem */
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 2b8963f..a378c29 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -39,6 +39,23 @@
 };
 
 /*
+ * why some writeback work was initiated
+ */
+enum wb_reason {
+	WB_REASON_BACKGROUND,
+	WB_REASON_TRY_TO_FREE_PAGES,
+	WB_REASON_SYNC,
+	WB_REASON_PERIODIC,
+	WB_REASON_LAPTOP_TIMER,
+	WB_REASON_FREE_MORE_MEM,
+	WB_REASON_FS_FREE_SPACE,
+	WB_REASON_FORKER_THREAD,
+
+	WB_REASON_MAX,
+};
+extern const char *wb_reason_name[];
+
+/*
  * A control structure which tells the writeback code what to do.  These are
  * always on the stack, and hence need no locking.  They are always initialised
  * in a manner such that unspecified fields are set to zero.
@@ -69,14 +86,17 @@
  */	
 struct bdi_writeback;
 int inode_wait(void *);
-void writeback_inodes_sb(struct super_block *);
-void writeback_inodes_sb_nr(struct super_block *, unsigned long nr);
-int writeback_inodes_sb_if_idle(struct super_block *);
-int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr);
+void writeback_inodes_sb(struct super_block *, enum wb_reason reason);
+void writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
+							enum wb_reason reason);
+int writeback_inodes_sb_if_idle(struct super_block *, enum wb_reason reason);
+int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr,
+							enum wb_reason reason);
 void sync_inodes_sb(struct super_block *);
-long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages);
+long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
+				enum wb_reason reason);
 long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
-void wakeup_flusher_threads(long nr_pages);
+void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
 
 /* writeback.h requires fs.h; it, too, is not included from here. */
 static inline void wait_on_inode(struct inode *inode)
@@ -143,6 +163,7 @@
 
 void __bdi_update_bandwidth(struct backing_dev_info *bdi,
 			    unsigned long thresh,
+			    unsigned long bg_thresh,
 			    unsigned long dirty,
 			    unsigned long bdi_thresh,
 			    unsigned long bdi_dirty,
diff --git a/include/media/ov772x.h b/include/media/ov772x.h
index 548bf11..00dbb7c 100644
--- a/include/media/ov772x.h
+++ b/include/media/ov772x.h
@@ -12,12 +12,9 @@
 #ifndef __OV772X_H__
 #define __OV772X_H__
 
-#include <media/soc_camera.h>
-
 /* for flags */
 #define OV772X_FLAG_VFLIP	(1 << 0) /* Vertical flip image */
 #define OV772X_FLAG_HFLIP	(1 << 1) /* Horizontal flip image */
-#define OV772X_FLAG_8BIT	(1 << 2) /* default 10 bit */
 
 /*
  * for Edge ctrl
@@ -32,22 +29,23 @@
 	unsigned char lower;
 };
 
-#define OV772X_MANUAL_EDGE_CTRL	0x80 /* un-used bit of strength */
-#define EDGE_STRENGTH_MASK	0x1F
-#define EDGE_THRESHOLD_MASK	0x0F
-#define EDGE_UPPER_MASK		0xFF
-#define EDGE_LOWER_MASK		0xFF
+#define OV772X_MANUAL_EDGE_CTRL		0x80 /* un-used bit of strength */
+#define OV772X_EDGE_STRENGTH_MASK	0x1F
+#define OV772X_EDGE_THRESHOLD_MASK	0x0F
+#define OV772X_EDGE_UPPER_MASK		0xFF
+#define OV772X_EDGE_LOWER_MASK		0xFF
 
 #define OV772X_AUTO_EDGECTRL(u, l)	\
 {					\
-	.upper = (u & EDGE_UPPER_MASK),	\
-	.lower = (l & EDGE_LOWER_MASK),	\
+	.upper = (u & OV772X_EDGE_UPPER_MASK),	\
+	.lower = (l & OV772X_EDGE_LOWER_MASK),	\
 }
 
-#define OV772X_MANUAL_EDGECTRL(s, t)					\
-{									\
-	.strength  = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\
-	.threshold = (t & EDGE_THRESHOLD_MASK),				\
+#define OV772X_MANUAL_EDGECTRL(s, t)			\
+{							\
+	.strength  = (s & OV772X_EDGE_STRENGTH_MASK) |	\
+			OV772X_MANUAL_EDGE_CTRL,	\
+	.threshold = (t & OV772X_EDGE_THRESHOLD_MASK),	\
 }
 
 /*
diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h
new file mode 100644
index 0000000..ba34f70
--- /dev/null
+++ b/include/media/s5k6aa.h
@@ -0,0 +1,51 @@
+/*
+ * S5K6AAFX camera sensor driver header
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5K6AA_H
+#define S5K6AA_H
+
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5k6aa_gpio - data structure describing a GPIO
+ * @gpio:  GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k6aa_gpio {
+	int gpio;
+	int level;
+};
+
+/**
+ * struct s5k6aa_platform_data - s5k6aa driver platform data
+ * @set_power:   an additional callback to the board code, called
+ *               after enabling the regulators and before switching
+ *               the sensor off
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset:  GPIO driving RESET pin
+ * @gpio_stby:   GPIO driving STBY pin
+ * @nlanes:      maximum number of MIPI-CSI lanes used
+ * @horiz_flip:  default horizontal image flip value, non zero to enable
+ * @vert_flip:   default vertical image flip value, non zero to enable
+ */
+
+struct s5k6aa_platform_data {
+	int (*set_power)(int enable);
+	unsigned long mclk_frequency;
+	struct s5k6aa_gpio gpio_reset;
+	struct s5k6aa_gpio gpio_stby;
+	enum v4l2_mbus_type bus_type;
+	u8 nlanes;
+	u8 horiz_flip;
+	u8 vert_flip;
+};
+
+#endif /* S5K6AA_H */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 5017500..0f037e8e 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -1,7 +1,6 @@
 #ifndef __SAA7146__
 #define __SAA7146__
 
-#include <linux/module.h>	/* for module-version */
 #include <linux/delay.h>	/* for delay-stuff */
 #include <linux/slab.h>		/* for kmalloc/kfree */
 #include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
@@ -55,6 +54,8 @@
 #define SAA7146_ISR_CLEAR(x,y) \
 	saa7146_write(x, ISR, (y));
 
+struct module;
+
 struct saa7146_dev;
 struct saa7146_extension;
 struct saa7146_vv;
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 7582952..b1377b9 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -12,12 +12,14 @@
 #ifndef SOC_CAMERA_H
 #define SOC_CAMERA_H
 
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/pm.h>
 #include <linux/videodev2.h>
 #include <media/videobuf-core.h>
 #include <media/videobuf2-core.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 
 struct file;
@@ -37,8 +39,8 @@
 	unsigned char iface;		/* Host number */
 	unsigned char devnum;		/* Device number per host */
 	struct soc_camera_sense *sense;	/* See comment in struct definition */
-	struct soc_camera_ops *ops;
 	struct video_device *vdev;
+	struct v4l2_ctrl_handler ctrl_handler;
 	const struct soc_camera_format_xlate *current_fmt;
 	struct soc_camera_format_xlate *user_formats;
 	int num_user_formats;
@@ -93,14 +95,10 @@
 	int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *);
 	int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
 	int (*set_bus_param)(struct soc_camera_device *, __u32);
-	int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *);
-	int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *);
 	int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
 	int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
 	int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *);
 	unsigned int (*poll)(struct file *, poll_table *);
-	const struct v4l2_queryctrl *controls;
-	int num_controls;
 };
 
 #define SOCAM_SENSOR_INVERT_PCLK	(1 << 0)
@@ -193,13 +191,6 @@
 	const struct soc_mbus_pixelfmt *host_fmt;
 };
 
-struct soc_camera_ops {
-	unsigned long (*query_bus_param)(struct soc_camera_device *);
-	int (*set_bus_param)(struct soc_camera_device *, unsigned long);
-	const struct v4l2_queryctrl *controls;
-	int num_controls;
-};
-
 #define SOCAM_SENSE_PCLK_CHANGED	(1 << 0)
 
 /**
@@ -226,65 +217,18 @@
 	unsigned long pixel_clock;
 };
 
-static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
-	struct soc_camera_ops *ops, int id)
-{
-	int i;
-
-	for (i = 0; i < ops->num_controls; i++)
-		if (ops->controls[i].id == id)
-			return &ops->controls[i];
-
-	return NULL;
-}
-
-#define SOCAM_MASTER			(1 << 0)
-#define SOCAM_SLAVE			(1 << 1)
-#define SOCAM_HSYNC_ACTIVE_HIGH		(1 << 2)
-#define SOCAM_HSYNC_ACTIVE_LOW		(1 << 3)
-#define SOCAM_VSYNC_ACTIVE_HIGH		(1 << 4)
-#define SOCAM_VSYNC_ACTIVE_LOW		(1 << 5)
-#define SOCAM_DATAWIDTH_4		(1 << 6)
-#define SOCAM_DATAWIDTH_8		(1 << 7)
-#define SOCAM_DATAWIDTH_9		(1 << 8)
-#define SOCAM_DATAWIDTH_10		(1 << 9)
-#define SOCAM_DATAWIDTH_15		(1 << 10)
-#define SOCAM_DATAWIDTH_16		(1 << 11)
-#define SOCAM_PCLK_SAMPLE_RISING	(1 << 12)
-#define SOCAM_PCLK_SAMPLE_FALLING	(1 << 13)
-#define SOCAM_DATA_ACTIVE_HIGH		(1 << 14)
-#define SOCAM_DATA_ACTIVE_LOW		(1 << 15)
-#define SOCAM_MIPI_1LANE		(1 << 16)
-#define SOCAM_MIPI_2LANE		(1 << 17)
-#define SOCAM_MIPI_3LANE		(1 << 18)
-#define SOCAM_MIPI_4LANE		(1 << 19)
-#define SOCAM_MIPI	(SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
-			SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
+#define SOCAM_DATAWIDTH(x)	BIT((x) - 1)
+#define SOCAM_DATAWIDTH_4	SOCAM_DATAWIDTH(4)
+#define SOCAM_DATAWIDTH_8	SOCAM_DATAWIDTH(8)
+#define SOCAM_DATAWIDTH_9	SOCAM_DATAWIDTH(9)
+#define SOCAM_DATAWIDTH_10	SOCAM_DATAWIDTH(10)
+#define SOCAM_DATAWIDTH_15	SOCAM_DATAWIDTH(15)
+#define SOCAM_DATAWIDTH_16	SOCAM_DATAWIDTH(16)
 
 #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
 			      SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
 			      SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16)
 
-static inline unsigned long soc_camera_bus_param_compatible(
-			unsigned long camera_flags, unsigned long bus_flags)
-{
-	unsigned long common_flags, hsync, vsync, pclk, data, buswidth, mode;
-	unsigned long mipi;
-
-	common_flags = camera_flags & bus_flags;
-
-	hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW);
-	vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW);
-	pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING);
-	data = common_flags & (SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW);
-	mode = common_flags & (SOCAM_MASTER | SOCAM_SLAVE);
-	buswidth = common_flags & SOCAM_DATAWIDTH_MASK;
-	mipi = common_flags & SOCAM_MIPI;
-
-	return ((!hsync || !vsync || !pclk || !data || !mode || !buswidth) && !mipi) ? 0 :
-		common_flags;
-}
-
 static inline void soc_camera_limit_side(int *start, int *length,
 		unsigned int start_min,
 		unsigned int length_min, unsigned int length_max)
@@ -300,23 +244,37 @@
 		*start = start_min + length_max - *length;
 }
 
-extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
-						   unsigned long flags);
+unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
+					    unsigned long flags);
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+					   const struct v4l2_mbus_config *cfg);
 
 /* This is only temporary here - until v4l2-subdev begins to link to video_device */
 #include <linux/i2c.h>
-static inline struct video_device *soc_camera_i2c_to_vdev(struct i2c_client *client)
+static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client)
 {
-	struct soc_camera_device *icd = client->dev.platform_data;
-	return icd->vdev;
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+	return icd ? icd->vdev : NULL;
 }
 
-static inline struct soc_camera_device *soc_camera_from_vb2q(struct vb2_queue *vq)
+static inline struct soc_camera_link *soc_camera_i2c_to_link(const struct i2c_client *client)
+{
+	return client->dev.platform_data;
+}
+
+static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(const struct video_device *vdev)
+{
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
+	return soc_camera_to_subdev(icd);
+}
+
+static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq)
 {
 	return container_of(vq, struct soc_camera_device, vb2_vidq);
 }
 
-static inline struct soc_camera_device *soc_camera_from_vbq(struct videobuf_queue *vq)
+static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq)
 {
 	return container_of(vq, struct soc_camera_device, vb_vidq);
 }
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
index 74f0fa1..8aa4200 100644
--- a/include/media/soc_camera_platform.h
+++ b/include/media/soc_camera_platform.h
@@ -13,6 +13,7 @@
 
 #include <linux/videodev2.h>
 #include <media/soc_camera.h>
+#include <media/v4l2-mediabus.h>
 
 struct device;
 
@@ -20,7 +21,8 @@
 	const char *format_name;
 	unsigned long format_depth;
 	struct v4l2_mbus_framefmt format;
-	unsigned long bus_param;
+	unsigned long mbus_param;
+	enum v4l2_mbus_type mbus_type;
 	struct soc_camera_device *icd;
 	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
 };
diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h
index fae4325..73f1e7e 100644
--- a/include/media/soc_mediabus.h
+++ b/include/media/soc_mediabus.h
@@ -82,5 +82,7 @@
 s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
 int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
 			unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+					unsigned int flags);
 
 #endif
diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
index fbf5855..e6aa231 100644
--- a/include/media/v4l2-int-device.h
+++ b/include/media/v4l2-int-device.h
@@ -25,7 +25,6 @@
 #ifndef V4L2_INT_DEVICE_H
 #define V4L2_INT_DEVICE_H
 
-#include <linux/module.h>
 #include <media/v4l2-common.h>
 
 #define V4L2NAMESIZE 32
@@ -41,6 +40,8 @@
 	v4l2_int_type_slave
 };
 
+struct module;
+
 struct v4l2_int_device;
 
 struct v4l2_int_master {
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index dd9f1e7..4d1c74a 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -122,6 +122,8 @@
 	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
 	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
 
+	int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b);
+	int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b);
 
 	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
 	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 257da1a..f0f3358 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -158,6 +158,7 @@
 	int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 	int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
 	int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+	int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
 	int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
 	long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 #ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -534,13 +535,13 @@
 	void *dev_priv;
 	void *host_priv;
 	/* subdev device node */
-	struct video_device devnode;
+	struct video_device *devnode;
 };
 
 #define media_entity_to_v4l2_subdev(ent) \
 	container_of(ent, struct v4l2_subdev, entity)
 #define vdev_to_v4l2_subdev(vdev) \
-	container_of(vdev, struct v4l2_subdev, devnode)
+	video_get_drvdata(vdev)
 
 /*
  * Used for storing subdev information per file handle
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index ea55c08..a15d1f1 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -105,6 +105,7 @@
 /**
  * enum vb2_buffer_state - current video buffer state
  * @VB2_BUF_STATE_DEQUEUED:	buffer under userspace control
+ * @VB2_BUF_STATE_PREPARED:	buffer prepared in videobuf and by the driver
  * @VB2_BUF_STATE_QUEUED:	buffer queued in videobuf, but not in driver
  * @VB2_BUF_STATE_ACTIVE:	buffer queued in driver and possibly used
  *				in a hardware operation
@@ -116,6 +117,7 @@
  */
 enum vb2_buffer_state {
 	VB2_BUF_STATE_DEQUEUED,
+	VB2_BUF_STATE_PREPARED,
 	VB2_BUF_STATE_QUEUED,
 	VB2_BUF_STATE_ACTIVE,
 	VB2_BUF_STATE_DONE,
@@ -167,13 +169,21 @@
 /**
  * struct vb2_ops - driver-specific callbacks
  *
- * @queue_setup:	called from a VIDIOC_REQBUFS handler, before
- *			memory allocation; driver should return the required
- *			number of buffers in num_buffers, the required number
- *			of planes per buffer in num_planes; the size of each
- *			plane should be set in the sizes[] array and optional
- *			per-plane allocator specific context in alloc_ctxs[]
- *			array
+ * @queue_setup:	called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ *			handlers before memory allocation, or, if
+ *			*num_planes != 0, after the allocation to verify a
+ *			smaller number of buffers. Driver should return
+ *			the required number of buffers in *num_buffers, the
+ *			required number of planes per buffer in *num_planes; the
+ *			size of each plane should be set in the sizes[] array
+ *			and optional per-plane allocator specific context in the
+ *			alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
+ *			fmt == NULL, the driver has to use the currently
+ *			configured format and *num_buffers is the total number
+ *			of buffers, that are being allocated. When called from
+ *			VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
+ *			target frame format. In this case *num_buffers are being
+ *			allocated additionally to q->num_buffers.
  * @wait_prepare:	release any locks taken while calling vb2 functions;
  *			it is called before an ioctl needs to wait for a new
  *			buffer to arrive; required to avoid a deadlock in
@@ -186,11 +196,11 @@
  *			perform additional buffer-related initialization;
  *			initialization failure (return != 0) will prevent
  *			queue setup from completing successfully; optional
- * @buf_prepare:	called every time the buffer is queued from userspace;
- *			drivers may perform any initialization required before
- *			each hardware operation in this callback;
- *			if an error is returned, the buffer will not be queued
- *			in driver; optional
+ * @buf_prepare:	called every time the buffer is queued from userspace
+ *			and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ *			perform any initialization required before each hardware
+ *			operation in this callback; if an error is returned, the
+ *			buffer will not be queued in driver; optional
  * @buf_finish:		called before every dequeue of the buffer back to
  *			userspace; drivers may perform any operations required
  *			before userspace accesses the buffer; optional
@@ -216,9 +226,9 @@
  *			pre-queued buffers before calling STREAMON
  */
 struct vb2_ops {
-	int (*queue_setup)(struct vb2_queue *q, unsigned int *num_buffers,
-			   unsigned int *num_planes, unsigned int sizes[],
-			   void *alloc_ctxs[]);
+	int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], void *alloc_ctxs[]);
 
 	void (*wait_prepare)(struct vb2_queue *q);
 	void (*wait_finish)(struct vb2_queue *q);
@@ -298,6 +308,9 @@
 int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
 int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
 
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
 int vb2_queue_init(struct vb2_queue *q);
 
 void vb2_queue_release(struct vb2_queue *q);
@@ -309,6 +322,13 @@
 int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
 
 int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+				    unsigned long addr,
+				    unsigned long len,
+				    unsigned long pgoff,
+				    unsigned long flags);
+#endif
 unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
 size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
 		loff_t *ppos, int nonblock);
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 2f7d45b..1a7e1d2 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -45,6 +45,51 @@
 	__u64 usr_ptr;
 };
 
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB:	OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB:	OOB data are automatically placed at the free areas
+ *			which are defined by the internal ecclayout
+ * @MTD_OPS_RAW:	data are transferred as-is, with no error correction;
+ *			this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+	MTD_OPS_PLACE_OOB = 0,
+	MTD_OPS_AUTO_OOB = 1,
+	MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start:	start address
+ * @len:	length of data buffer
+ * @ooblen:	length of OOB buffer
+ * @usr_data:	user-provided data buffer
+ * @usr_oob:	user-provided OOB buffer
+ * @mode:	MTD mode (see "MTD operation modes")
+ * @padding:	reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+	__u64 start;
+	__u64 len;
+	__u64 ooblen;
+	__u64 usr_data;
+	__u64 usr_oob;
+	__u8 mode;
+	__u8 padding[7];
+};
+
 #define MTD_ABSENT		0
 #define MTD_RAM			1
 #define MTD_ROM			2
@@ -59,13 +104,13 @@
 #define MTD_NO_ERASE		0x1000	/* No erase necessary */
 #define MTD_POWERUP_LOCK	0x2000	/* Always locked after reset */
 
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
 #define MTD_CAP_ROM		0
 #define MTD_CAP_RAM		(MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
 #define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
 #define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
 
-/* ECC byte placement */
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
 #define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
 #define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
 #define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
@@ -80,21 +125,18 @@
 struct mtd_info_user {
 	__u8 type;
 	__u32 flags;
-	__u32 size;	 // Total size of the MTD
+	__u32 size;	/* Total size of the MTD */
 	__u32 erasesize;
 	__u32 writesize;
-	__u32 oobsize;   // Amount of OOB data per block (e.g. 16)
-	/* The below two fields are obsolete and broken, do not use them
-	 * (TODO: remove at some point) */
-	__u32 ecctype;
-	__u32 eccsize;
+	__u32 oobsize;	/* Amount of OOB data per block (e.g. 16) */
+	__u64 padding;	/* Old obsolete field; do not use */
 };
 
 struct region_info_user {
 	__u32 offset;		/* At which this region starts,
-					 * from the beginning of the MTD */
-	__u32 erasesize;		/* For this region */
-	__u32 numblocks;		/* Number of blocks in this region */
+				 * from the beginning of the MTD */
+	__u32 erasesize;	/* For this region */
+	__u32 numblocks;	/* Number of blocks in this region */
 	__u32 regionindex;
 };
 
@@ -104,29 +146,61 @@
 	__u32 locked;
 };
 
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL           _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
 #define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
 #define MEMERASE		_IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
 #define MEMWRITEOOB		_IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
 #define MEMREADOOB		_IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
 #define MEMLOCK			_IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
 #define MEMUNLOCK		_IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
 #define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
 #define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
-#define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
 #define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
 #define MEMGETBADBLOCK		_IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
 #define MEMSETBADBLOCK		_IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
 #define OTPSELECT		_IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
 #define OTPGETREGIONCOUNT	_IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
 #define OTPGETREGIONINFO	_IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
 #define OTPLOCK			_IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
 #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
 #define MTDFILEMODE		_IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
 #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
 #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
 #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
 #define MEMISLOCKED		_IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req")
+ */
+#define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
 
 /*
  * Obsolete legacy interface. Keep it in order not to break userspace
@@ -177,13 +251,27 @@
 };
 
 /*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL:	OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY:	OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER:	OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW:		OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
  */
 enum mtd_file_modes {
-	MTD_MODE_NORMAL = MTD_OTP_OFF,
-	MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
-	MTD_MODE_OTP_USER = MTD_OTP_USER,
-	MTD_MODE_RAW,
+	MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+	MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+	MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+	MTD_FILE_MODE_RAW,
 };
 
 #endif /* __MTD_ABI_H__ */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 5b92442..3779ea3 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -513,11 +513,15 @@
 		d->destruct(d);
 }
 
-static inline void hci_dev_put(struct hci_dev *d)
-{
-	__hci_dev_put(d);
-	module_put(d->owner);
-}
+/*
+ * hci_dev_put and hci_dev_hold are macros to avoid dragging all the
+ * overhead of all the modular infrastructure into this header.
+ */
+#define hci_dev_put(d)		\
+do {				\
+	__hci_dev_put(d);	\
+	module_put(d->owner);	\
+} while (0)
 
 static inline struct hci_dev *__hci_dev_hold(struct hci_dev *d)
 {
@@ -525,12 +529,10 @@
 	return d;
 }
 
-static inline struct hci_dev *hci_dev_hold(struct hci_dev *d)
-{
-	if (try_module_get(d->owner))
-		return __hci_dev_hold(d);
-	return NULL;
-}
+#define hci_dev_hold(d)						\
+({								\
+	try_module_get(d->owner) ? __hci_dev_hold(d) : NULL;	\
+})
 
 #define hci_dev_lock(d)		spin_lock(&d->lock)
 #define hci_dev_unlock(d)	spin_unlock(&d->lock)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index ab90ae0..6cc18f3 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -39,8 +39,11 @@
 #define L2CAP_DEFAULT_ACK_TO		200
 #define L2CAP_LE_DEFAULT_MTU		23
 
-#define L2CAP_CONN_TIMEOUT	(40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT	(4000)  /*  4 seconds */
+#define L2CAP_DISC_TIMEOUT             (100)
+#define L2CAP_DISC_REJ_TIMEOUT         (5000)  /*  5 seconds */
+#define L2CAP_ENC_TIMEOUT              (5000)  /*  5 seconds */
+#define L2CAP_CONN_TIMEOUT             (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT             (4000)  /*  4 seconds */
 
 /* L2CAP socket address */
 struct sockaddr_l2 {
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index d5eee20..e2e3eca 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -211,6 +211,7 @@
 #define RFCOMM_AUTH_ACCEPT  6
 #define RFCOMM_AUTH_REJECT  7
 #define RFCOMM_DEFER_SETUP  8
+#define RFCOMM_ENC_DROP     9
 
 /* Scheduling flags and events */
 #define RFCOMM_SCHED_WAKEUP 31
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 92cf1c2..95852e3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -456,6 +456,9 @@
  *	as the AC bitmap in the QoS info field
  * @max_sp: max Service Period. same format as the MAX_SP in the
  *	QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ *	(for those that don't have a natural "no change" value),
+ *	see &enum station_parameters_apply_mask
  */
 struct station_parameters {
 	u8 *supported_rates;
@@ -615,6 +618,7 @@
  *	user space MLME/SME implementation. The information is provided for
  *	the cfg80211_new_sta() calls to notify user space of the IEs.
  * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
  */
 struct station_info {
 	u32 filled;
diff --git a/include/net/dst.h b/include/net/dst.h
index 4fb6c43..6faec1a 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -205,12 +205,7 @@
 
 static inline u32 dst_mtu(const struct dst_entry *dst)
 {
-	u32 mtu = dst_metric_raw(dst, RTAX_MTU);
-
-	if (!mtu)
-		mtu = dst->ops->default_mtu(dst);
-
-	return mtu;
+	return dst->ops->mtu(dst);
 }
 
 /* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */
diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
index 9adb998..e1c2ee0 100644
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -17,7 +17,7 @@
 	int			(*gc)(struct dst_ops *ops);
 	struct dst_entry *	(*check)(struct dst_entry *, __u32 cookie);
 	unsigned int		(*default_advmss)(const struct dst_entry *);
-	unsigned int		(*default_mtu)(const struct dst_entry *);
+	unsigned int		(*mtu)(const struct dst_entry *);
 	u32 *			(*cow_metrics)(struct dst_entry *, unsigned long);
 	void			(*destroy)(struct dst_entry *);
 	void			(*ifdown)(struct dst_entry *,
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index b897d6e..f941964 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -31,6 +31,7 @@
 /** struct ip_options - IP Options
  *
  * @faddr - Saved first hop address
+ * @nexthop - Saved nexthop address in LSRR and SSRR
  * @is_data - Options in __data, rather than skb
  * @is_strictroute - Strict source route
  * @srr_is_hit - Packet destination addr was our one
@@ -41,6 +42,7 @@
  */
 struct ip_options {
 	__be32		faddr;
+	__be32		nexthop;
 	unsigned char	optlen;
 	unsigned char	srr;
 	unsigned char	rr;
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index f91a1fb..e8c25b9 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -18,7 +18,6 @@
 
 #include <linux/kmemcheck.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index 78c83e6..e9ff3fc 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -35,6 +35,7 @@
 
 	u32			metrics[RTAX_MAX];
 	u32			rate_tokens;	/* rate limiting for ICMP */
+	int			redirect_genid;
 	unsigned long		rate_last;
 	unsigned long		pmtu_expires;
 	u32			pmtu_orig;
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 8fa4430..873d5be 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -425,9 +425,9 @@
 
 	const char *(*state_name)(int state);
 
-	int (*state_transition)(struct ip_vs_conn *cp, int direction,
-				const struct sk_buff *skb,
-				struct ip_vs_proto_data *pd);
+	void (*state_transition)(struct ip_vs_conn *cp, int direction,
+				 const struct sk_buff *skb,
+				 struct ip_vs_proto_data *pd);
 
 	int (*register_app)(struct net *net, struct ip_vs_app *inc);
 
@@ -1126,17 +1126,16 @@
 struct ip_vs_pe *ip_vs_pe_getbyname(const char *name);
 struct ip_vs_pe *__ip_vs_pe_getbyname(const char *pe_name);
 
-static inline void ip_vs_pe_get(const struct ip_vs_pe *pe)
-{
-	if (pe && pe->module)
+/*
+ * Use a #define to avoid all of module.h just for these trivial ops
+ */
+#define ip_vs_pe_get(pe)			\
+	if (pe && pe->module)			\
 		__module_get(pe->module);
-}
 
-static inline void ip_vs_pe_put(const struct ip_vs_pe *pe)
-{
-	if (pe && pe->module)
+#define ip_vs_pe_put(pe)			\
+	if (pe && pe->module)			\
 		module_put(pe->module);
-}
 
 /*
  *	IPVS protocol functions (from ip_vs_proto.c)
@@ -1378,7 +1377,7 @@
 
 extern void ip_vs_update_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp,
 				   int outin);
-extern int ip_vs_confirm_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp);
+extern int ip_vs_confirm_conntrack(struct sk_buff *skb);
 extern void ip_vs_nfct_expect_related(struct sk_buff *skb, struct nf_conn *ct,
 				      struct ip_vs_conn *cp, u_int8_t proto,
 				      const __be16 port, int from_rs);
@@ -1396,8 +1395,7 @@
 {
 }
 
-static inline int ip_vs_confirm_conntrack(struct sk_buff *skb,
-					  struct ip_vs_conn *cp)
+static inline int ip_vs_confirm_conntrack(struct sk_buff *skb)
 {
 	return NF_ACCEPT;
 }
diff --git a/include/net/lib80211.h b/include/net/lib80211.h
index 2ec896b..d178c26 100644
--- a/include/net/lib80211.h
+++ b/include/net/lib80211.h
@@ -25,7 +25,6 @@
 
 #include <linux/types.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/atomic.h>
 #include <linux/if.h>
 #include <linux/skbuff.h>
@@ -42,6 +41,8 @@
 	IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
 };
 
+struct module;
+
 struct lib80211_crypto_ops {
 	const char *name;
 	struct list_head list;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index dc1123a..72eddd1 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3567,8 +3567,9 @@
 			return i;
 
 	/* warn when we cannot find a rate. */
-	WARN_ON(1);
+	WARN_ON_ONCE(1);
 
+	/* and return 0 (the lowest index) */
 	return 0;
 }
 
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 0b7f05e..8a2b0ae 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -313,6 +313,8 @@
 	return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK;
 }
 
+struct kernel_param;
+
 extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
 extern unsigned int nf_conntrack_htable_size;
 extern unsigned int nf_conntrack_max;
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 4283508..a88fb69 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -67,18 +67,18 @@
 	int (*fcn)(unsigned int events, struct nf_ct_event *item);
 };
 
-extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb;
-extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb);
-extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb);
+extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb);
+extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb);
 
 extern void nf_ct_deliver_cached_events(struct nf_conn *ct);
 
 static inline void
 nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct)
 {
+	struct net *net = nf_ct_net(ct);
 	struct nf_conntrack_ecache *e;
 
-	if (nf_conntrack_event_cb == NULL)
+	if (net->ct.nf_conntrack_event_cb == NULL)
 		return;
 
 	e = nf_ct_ecache_find(ct);
@@ -95,11 +95,12 @@
 			      int report)
 {
 	int ret = 0;
+	struct net *net = nf_ct_net(ct);
 	struct nf_ct_event_notifier *notify;
 	struct nf_conntrack_ecache *e;
 
 	rcu_read_lock();
-	notify = rcu_dereference(nf_conntrack_event_cb);
+	notify = rcu_dereference(net->ct.nf_conntrack_event_cb);
 	if (notify == NULL)
 		goto out_unlock;
 
@@ -164,9 +165,8 @@
 	int (*fcn)(unsigned int events, struct nf_exp_event *item);
 };
 
-extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb;
-extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb);
-extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb);
+extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb);
+extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb);
 
 static inline void
 nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
@@ -174,11 +174,12 @@
 			  u32 pid,
 			  int report)
 {
+	struct net *net = nf_ct_exp_net(exp);
 	struct nf_exp_event_notifier *notify;
 	struct nf_conntrack_ecache *e;
 
 	rcu_read_lock();
-	notify = rcu_dereference(nf_expect_event_cb);
+	notify = rcu_dereference(net->ct.nf_expect_event_cb);
 	if (notify == NULL)
 		goto out_unlock;
 
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 7ca6bdd..2f8fb77 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -12,6 +12,7 @@
 
 #include <linux/netfilter/x_tables.h>
 #include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <linux/netfilter_ipv4/nf_nat.h>
 #include <linux/list_nulls.h>
 
 /* A `tuple' is a structure containing the information to uniquely
@@ -24,32 +25,6 @@
 
 #define NF_CT_TUPLE_L3SIZE	ARRAY_SIZE(((union nf_inet_addr *)NULL)->all)
 
-/* The protocol-specific manipulable parts of the tuple: always in
-   network order! */
-union nf_conntrack_man_proto {
-	/* Add other protocols here. */
-	__be16 all;
-
-	struct {
-		__be16 port;
-	} tcp;
-	struct {
-		__be16 port;
-	} udp;
-	struct {
-		__be16 id;
-	} icmp;
-	struct {
-		__be16 port;
-	} dccp;
-	struct {
-		__be16 port;
-	} sctp;
-	struct {
-		__be16 key;	/* GRE key is 32bit, PPtP only uses 16bit */
-	} gre;
-};
-
 /* The manipulable part of the tuple. */
 struct nf_conntrack_man {
 	union nf_inet_addr u3;
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index 0346b00..b8872df 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -1,6 +1,7 @@
 #ifndef _NF_NAT_H
 #define _NF_NAT_H
 #include <linux/netfilter_ipv4.h>
+#include <linux/netfilter_ipv4/nf_nat.h>
 #include <net/netfilter/nf_conntrack_tuple.h>
 
 #define NF_NAT_MAPPING_TYPE_MAX_NAMELEN 16
@@ -14,11 +15,6 @@
 #define HOOK2MANIP(hooknum) ((hooknum) != NF_INET_POST_ROUTING && \
 			     (hooknum) != NF_INET_LOCAL_IN)
 
-#define IP_NAT_RANGE_MAP_IPS 1
-#define IP_NAT_RANGE_PROTO_SPECIFIED 2
-#define IP_NAT_RANGE_PROTO_RANDOM 4
-#define IP_NAT_RANGE_PERSISTENT 8
-
 /* NAT sequence number modifications */
 struct nf_nat_seq {
 	/* position of the last TCP sequence number modification (if any) */
@@ -28,26 +24,6 @@
 	int16_t offset_before, offset_after;
 };
 
-/* Single range specification. */
-struct nf_nat_range {
-	/* Set to OR of flags above. */
-	unsigned int flags;
-
-	/* Inclusive: network order. */
-	__be32 min_ip, max_ip;
-
-	/* Inclusive: network order */
-	union nf_conntrack_man_proto min, max;
-};
-
-/* For backwards compat: don't use in modern code. */
-struct nf_nat_multi_range_compat {
-	unsigned int rangesize; /* Must be 1. */
-
-	/* hangs off end. */
-	struct nf_nat_range range[1];
-};
-
 #include <linux/list.h>
 #include <linux/netfilter/nf_conntrack_pptp.h>
 #include <net/netfilter/nf_conntrack_extend.h>
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 98c1854..cb1f350 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -192,8 +192,15 @@
  *    NLA_NUL_STRING       Maximum length of string (excluding NUL)
  *    NLA_FLAG             Unused
  *    NLA_BINARY           Maximum length of attribute payload
- *    NLA_NESTED_COMPAT    Exact length of structure payload
- *    All other            Exact length of attribute payload
+ *    NLA_NESTED           Don't use `len' field -- length verification is
+ *                         done by checking len of nested header (or empty)
+ *    NLA_NESTED_COMPAT    Minimum length of structure payload
+ *    NLA_U8, NLA_U16,
+ *    NLA_U32, NLA_U64,
+ *    NLA_MSECS            Leaving the length field zero will verify the
+ *                         given type fits, using it verifies minimum length
+ *                         just like "All other"
+ *    All other            Minimum length of attribute payload
  *
  * Example:
  * static const struct nla_policy my_policy[ATTR_MAX+1] = {
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index 0249399..7a911ec 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -18,6 +18,8 @@
 	struct hlist_nulls_head	unconfirmed;
 	struct hlist_nulls_head	dying;
 	struct ip_conntrack_stat __percpu *stat;
+	struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb;
+	struct nf_exp_event_notifier __rcu *nf_expect_event_cb;
 	int			sysctl_events;
 	unsigned int		sysctl_events_retry_timeout;
 	int			sysctl_acct;
diff --git a/include/net/red.h b/include/net/red.h
index 3319f16..b72a3b8 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -116,7 +116,7 @@
 	u32		qR;		/* Cached random number */
 
 	unsigned long	qavg;		/* Average queue length: A scaled */
-	psched_time_t	qidlestart;	/* Start of current idle period */
+	ktime_t		qidlestart;	/* Start of current idle period */
 };
 
 static inline u32 red_rmask(u8 Plog)
@@ -148,17 +148,17 @@
 
 static inline int red_is_idling(struct red_parms *p)
 {
-	return p->qidlestart != PSCHED_PASTPERFECT;
+	return p->qidlestart.tv64 != 0;
 }
 
 static inline void red_start_of_idle_period(struct red_parms *p)
 {
-	p->qidlestart = psched_get_time();
+	p->qidlestart = ktime_get();
 }
 
 static inline void red_end_of_idle_period(struct red_parms *p)
 {
-	p->qidlestart = PSCHED_PASTPERFECT;
+	p->qidlestart.tv64 = 0;
 }
 
 static inline void red_restart(struct red_parms *p)
@@ -170,13 +170,10 @@
 
 static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p)
 {
-	psched_time_t now;
-	long us_idle;
+	s64 delta = ktime_us_delta(ktime_get(), p->qidlestart);
+	long us_idle = min_t(s64, delta, p->Scell_max);
 	int  shift;
 
-	now = psched_get_time();
-	us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max);
-
 	/*
 	 * The problem: ideally, average length queue recalcultion should
 	 * be done over constant clock intervals. This is too expensive, so
diff --git a/include/net/route.h b/include/net/route.h
index db7b343..91855d1 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -71,12 +71,12 @@
 	struct fib_info		*fi; /* for client ref to shared metrics */
 };
 
-static inline bool rt_is_input_route(struct rtable *rt)
+static inline bool rt_is_input_route(const struct rtable *rt)
 {
 	return rt->rt_route_iif != 0;
 }
 
-static inline bool rt_is_output_route(struct rtable *rt)
+static inline bool rt_is_output_route(const struct rtable *rt)
 {
 	return rt->rt_route_iif == 0;
 }
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 2eb207e..f6bb08b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -4,7 +4,6 @@
 #include <linux/netdevice.h>
 #include <linux/types.h>
 #include <linux/rcupdate.h>
-#include <linux/module.h>
 #include <linux/pkt_sched.h>
 #include <linux/pkt_cls.h>
 #include <net/gen_stats.h>
diff --git a/include/net/sock.h b/include/net/sock.h
index c6658be..abb6e0f 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -46,7 +46,6 @@
 #include <linux/list_nulls.h>
 #include <linux/timer.h>
 #include <linux/cache.h>
-#include <linux/module.h>
 #include <linux/lockdep.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>	/* struct sk_buff */
@@ -729,6 +728,7 @@
 struct timewait_sock_ops;
 struct inet_hashinfo;
 struct raw_hashinfo;
+struct module;
 
 /* Networking protocol blocks we attach to sockets.
  * socket layer -> transport layer interface
diff --git a/include/net/tcp.h b/include/net/tcp.h
index e147f42..bb18c4d 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1403,11 +1403,13 @@
 	TCP_SEQ_STATE_TIME_WAIT,
 };
 
+int tcp_seq_open(struct inode *inode, struct file *file);
+
 struct tcp_seq_afinfo {
-	char			*name;
-	sa_family_t		family;
-	struct file_operations	seq_fops;
-	struct seq_operations	seq_ops;
+	char				*name;
+	sa_family_t			family;
+	const struct file_operations	*seq_fops;
+	struct seq_operations		seq_ops;
 };
 
 struct tcp_iter_state {
diff --git a/include/net/udp.h b/include/net/udp.h
index 67ea6fc..3b285f4 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -230,12 +230,14 @@
 #endif
 
 /* /proc */
+int udp_seq_open(struct inode *inode, struct file *file);
+
 struct udp_seq_afinfo {
-	char			*name;
-	sa_family_t		family;
-	struct udp_table	*udp_table;
-	struct file_operations	seq_fops;
-	struct seq_operations	seq_ops;
+	char				*name;
+	sa_family_t			family;
+	struct udp_table		*udp_table;
+	const struct file_operations	*seq_fops;
+	struct seq_operations		seq_ops;
 };
 
 struct udp_iter_state {
diff --git a/include/sound/core.h b/include/sound/core.h
index 91d5138..3be5ab7 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -22,7 +22,6 @@
  *
  */
 
-#include <linux/module.h>
 #include <linux/sched.h>		/* wake_up() */
 #include <linux/mutex.h>		/* struct mutex */
 #include <linux/rwsem.h>		/* struct rw_semaphore */
@@ -43,6 +42,7 @@
 #ifdef CONFIG_PCI
 struct pci_dev;
 #endif
+struct module;
 
 /* device allocation stuff */
 
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 35aa786f..7f5fed3 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -89,7 +89,6 @@
 	TRANSPORT_PROCESS_TMR	= 9,
 	TRANSPORT_ISTATE_PROCESSING = 11,
 	TRANSPORT_NEW_CMD_MAP	= 16,
-	TRANSPORT_FREE_CMD_INTR = 17,
 	TRANSPORT_COMPLETE_QF_WP = 18,
 	TRANSPORT_COMPLETE_QF_OK = 19,
 };
@@ -115,7 +114,6 @@
 	SCF_DELAYED_CMD_FROM_SAM_ATTR	= 0x00080000,
 	SCF_UNUSED			= 0x00100000,
 	SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00400000,
-	SCF_EMULATE_CDB_ASYNC		= 0x01000000,
 };
 
 /* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
@@ -426,6 +424,9 @@
 	enum transport_state_table t_state;
 	/* Transport specific error status */
 	int			transport_error_status;
+	/* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
+	int			check_release:1;
+	int			cmd_wait_set:1;
 	/* See se_cmd_flags_table */
 	u32			se_cmd_flags;
 	u32			se_ordered_id;
@@ -452,8 +453,10 @@
 	struct se_session	*se_sess;
 	struct se_tmr_req	*se_tmr_req;
 	struct list_head	se_queue_node;
+	struct list_head	se_cmd_list;
+	struct completion	cmd_wait_comp;
 	struct target_core_fabric_ops *se_tfo;
-	int (*transport_emulate_cdb)(struct se_cmd *);
+	int (*execute_task)(struct se_task *);
 	void (*transport_complete_callback)(struct se_cmd *);
 
 	unsigned char		*t_task_cdb;
@@ -559,12 +562,16 @@
 } ____cacheline_aligned;
 
 struct se_session {
+	int			sess_tearing_down:1;
 	u64			sess_bin_isid;
 	struct se_node_acl	*se_node_acl;
 	struct se_portal_group *se_tpg;
 	void			*fabric_sess_ptr;
 	struct list_head	sess_list;
 	struct list_head	sess_acl_list;
+	struct list_head	sess_cmd_list;
+	struct list_head	sess_wait_list;
+	spinlock_t		sess_cmd_lock;
 } ____cacheline_aligned;
 
 struct se_device;
diff --git a/include/target/target_core_device.h b/include/target/target_core_device.h
index 4657191..2be31ff 100644
--- a/include/target/target_core_device.h
+++ b/include/target/target_core_device.h
@@ -17,7 +17,7 @@
 					struct se_lun *);
 extern void core_dev_unexport(struct se_device *, struct se_portal_group *,
 					struct se_lun *);
-extern int transport_core_report_lun_response(struct se_cmd *);
+extern int target_report_luns(struct se_task *);
 extern void se_release_device_for_hba(struct se_device *);
 extern void se_release_vpd_for_dev(struct se_device *);
 extern void se_clear_dev_ports(struct se_device *);
diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h
index 126c675..0256825 100644
--- a/include/target/target_core_fabric_ops.h
+++ b/include/target/target_core_fabric_ops.h
@@ -46,9 +46,16 @@
 	int (*new_cmd_map)(struct se_cmd *);
 	/*
 	 * Optional to release struct se_cmd and fabric dependent allocated
-	 * I/O descriptor in transport_cmd_check_stop()
+	 * I/O descriptor in transport_cmd_check_stop().
+	 *
+	 * Returning 1 will signal a descriptor has been released.
+	 * Returning 0 will signal a descriptor has not been released.
 	 */
-	void (*check_stop_free)(struct se_cmd *);
+	int (*check_stop_free)(struct se_cmd *);
+	/*
+	 * Optional check for active I/O shutdown
+	 */
+	int (*check_release_cmd)(struct se_cmd *);
 	void (*release_cmd)(struct se_cmd *);
 	/*
 	 * Called with spin_lock_bh(struct se_portal_group->session_lock held.
diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h
index a037a1a..c16e943 100644
--- a/include/target/target_core_transport.h
+++ b/include/target/target_core_transport.h
@@ -160,17 +160,20 @@
 extern int transport_generic_handle_data(struct se_cmd *);
 extern void transport_new_cmd_failure(struct se_cmd *);
 extern int transport_generic_handle_tmr(struct se_cmd *);
-extern void transport_generic_free_cmd_intr(struct se_cmd *);
 extern bool target_stop_task(struct se_task *task, unsigned long *flags);
 extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32,
 				struct scatterlist *, u32);
 extern int transport_clear_lun_from_sessions(struct se_lun *);
-extern void transport_wait_for_tasks(struct se_cmd *);
+extern bool transport_wait_for_tasks(struct se_cmd *);
 extern int transport_check_aborted_status(struct se_cmd *, int);
 extern int transport_send_check_condition_and_sense(struct se_cmd *, u8, int);
 extern void transport_send_task_abort(struct se_cmd *);
 extern void transport_release_cmd(struct se_cmd *);
 extern void transport_generic_free_cmd(struct se_cmd *, int);
+extern void target_get_sess_cmd(struct se_session *, struct se_cmd *);
+extern int target_put_sess_cmd(struct se_session *, struct se_cmd *);
+extern void target_splice_sess_cmd_list(struct se_session *);
+extern void target_wait_for_sess_cmds(struct se_session *, int);
 extern void transport_generic_wait_for_cmds(struct se_cmd *, int);
 extern void transport_do_task_sg_chain(struct se_cmd *);
 extern void transport_generic_process_write(struct se_cmd *);
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index da39b22..b0b4eb2 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -21,16 +21,6 @@
 #undef CREATE_TRACE_POINTS
 
 #include <linux/stringify.h>
-/*
- * module.h includes tracepoints, and because ftrace.h
- * pulls in module.h:
- *  trace/ftrace.h -> linux/ftrace_event.h -> linux/perf_event.h ->
- *  linux/ftrace.h -> linux/module.h
- * we must include module.h here before we play with any of
- * the TRACE_EVENT() macros, otherwise the tracepoints included
- * by module.h may break the build.
- */
-#include <linux/module.h>
 
 #undef TRACE_EVENT
 #define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
diff --git a/include/trace/events/module.h b/include/trace/events/module.h
index 21a546d..1619327 100644
--- a/include/trace/events/module.h
+++ b/include/trace/events/module.h
@@ -1,6 +1,6 @@
 /*
  * Because linux/module.h has tracepoints in the header, and ftrace.h
- * eventually includes this file, define_trace.h includes linux/module.h
+ * used to include this file, define_trace.h includes linux/module.h
  * But we do not want the module.h to override the TRACE_SYSTEM macro
  * variable that define_trace.h is processing, so we only set it
  * when module events are being processed, which would happen when
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 5f17270..b99caa8 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -34,6 +34,7 @@
 		__field(int, for_kupdate)
 		__field(int, range_cyclic)
 		__field(int, for_background)
+		__field(int, reason)
 	),
 	TP_fast_assign(
 		strncpy(__entry->name, dev_name(bdi->dev), 32);
@@ -43,16 +44,18 @@
 		__entry->for_kupdate = work->for_kupdate;
 		__entry->range_cyclic = work->range_cyclic;
 		__entry->for_background	= work->for_background;
+		__entry->reason = work->reason;
 	),
 	TP_printk("bdi %s: sb_dev %d:%d nr_pages=%ld sync_mode=%d "
-		  "kupdate=%d range_cyclic=%d background=%d",
+		  "kupdate=%d range_cyclic=%d background=%d reason=%s",
 		  __entry->name,
 		  MAJOR(__entry->sb_dev), MINOR(__entry->sb_dev),
 		  __entry->nr_pages,
 		  __entry->sync_mode,
 		  __entry->for_kupdate,
 		  __entry->range_cyclic,
-		  __entry->for_background
+		  __entry->for_background,
+		  wb_reason_name[__entry->reason]
 	)
 );
 #define DEFINE_WRITEBACK_WORK_EVENT(name) \
@@ -104,30 +107,6 @@
 DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
 DEFINE_WRITEBACK_EVENT(writeback_thread_start);
 DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
-DEFINE_WRITEBACK_EVENT(balance_dirty_start);
-DEFINE_WRITEBACK_EVENT(balance_dirty_wait);
-
-TRACE_EVENT(balance_dirty_written,
-
-	TP_PROTO(struct backing_dev_info *bdi, int written),
-
-	TP_ARGS(bdi, written),
-
-	TP_STRUCT__entry(
-		__array(char,	name, 32)
-		__field(int,	written)
-	),
-
-	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
-		__entry->written = written;
-	),
-
-	TP_printk("bdi %s written %d",
-		  __entry->name,
-		  __entry->written
-	)
-);
 
 DECLARE_EVENT_CLASS(wbc_class,
 	TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
@@ -181,27 +160,31 @@
 
 TRACE_EVENT(writeback_queue_io,
 	TP_PROTO(struct bdi_writeback *wb,
-		 unsigned long *older_than_this,
+		 struct wb_writeback_work *work,
 		 int moved),
-	TP_ARGS(wb, older_than_this, moved),
+	TP_ARGS(wb, work, moved),
 	TP_STRUCT__entry(
 		__array(char,		name, 32)
 		__field(unsigned long,	older)
 		__field(long,		age)
 		__field(int,		moved)
+		__field(int,		reason)
 	),
 	TP_fast_assign(
+		unsigned long *older_than_this = work->older_than_this;
 		strncpy(__entry->name, dev_name(wb->bdi->dev), 32);
 		__entry->older	= older_than_this ?  *older_than_this : 0;
 		__entry->age	= older_than_this ?
 				  (jiffies - *older_than_this) * 1000 / HZ : -1;
 		__entry->moved	= moved;
+		__entry->reason	= work->reason;
 	),
-	TP_printk("bdi %s: older=%lu age=%ld enqueue=%d",
+	TP_printk("bdi %s: older=%lu age=%ld enqueue=%d reason=%s",
 		__entry->name,
 		__entry->older,	/* older_than_this in jiffies */
 		__entry->age,	/* older_than_this in relative milliseconds */
-		__entry->moved)
+		__entry->moved,
+		wb_reason_name[__entry->reason])
 );
 
 TRACE_EVENT(global_dirty_state,
@@ -250,6 +233,124 @@
 	)
 );
 
+#define KBps(x)			((x) << (PAGE_SHIFT - 10))
+
+TRACE_EVENT(bdi_dirty_ratelimit,
+
+	TP_PROTO(struct backing_dev_info *bdi,
+		 unsigned long dirty_rate,
+		 unsigned long task_ratelimit),
+
+	TP_ARGS(bdi, dirty_rate, task_ratelimit),
+
+	TP_STRUCT__entry(
+		__array(char,		bdi, 32)
+		__field(unsigned long,	write_bw)
+		__field(unsigned long,	avg_write_bw)
+		__field(unsigned long,	dirty_rate)
+		__field(unsigned long,	dirty_ratelimit)
+		__field(unsigned long,	task_ratelimit)
+		__field(unsigned long,	balanced_dirty_ratelimit)
+	),
+
+	TP_fast_assign(
+		strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+		__entry->write_bw	= KBps(bdi->write_bandwidth);
+		__entry->avg_write_bw	= KBps(bdi->avg_write_bandwidth);
+		__entry->dirty_rate	= KBps(dirty_rate);
+		__entry->dirty_ratelimit = KBps(bdi->dirty_ratelimit);
+		__entry->task_ratelimit	= KBps(task_ratelimit);
+		__entry->balanced_dirty_ratelimit =
+					  KBps(bdi->balanced_dirty_ratelimit);
+	),
+
+	TP_printk("bdi %s: "
+		  "write_bw=%lu awrite_bw=%lu dirty_rate=%lu "
+		  "dirty_ratelimit=%lu task_ratelimit=%lu "
+		  "balanced_dirty_ratelimit=%lu",
+		  __entry->bdi,
+		  __entry->write_bw,		/* write bandwidth */
+		  __entry->avg_write_bw,	/* avg write bandwidth */
+		  __entry->dirty_rate,		/* bdi dirty rate */
+		  __entry->dirty_ratelimit,	/* base ratelimit */
+		  __entry->task_ratelimit, /* ratelimit with position control */
+		  __entry->balanced_dirty_ratelimit /* the balanced ratelimit */
+	)
+);
+
+TRACE_EVENT(balance_dirty_pages,
+
+	TP_PROTO(struct backing_dev_info *bdi,
+		 unsigned long thresh,
+		 unsigned long bg_thresh,
+		 unsigned long dirty,
+		 unsigned long bdi_thresh,
+		 unsigned long bdi_dirty,
+		 unsigned long dirty_ratelimit,
+		 unsigned long task_ratelimit,
+		 unsigned long dirtied,
+		 long pause,
+		 unsigned long start_time),
+
+	TP_ARGS(bdi, thresh, bg_thresh, dirty, bdi_thresh, bdi_dirty,
+		dirty_ratelimit, task_ratelimit,
+		dirtied, pause, start_time),
+
+	TP_STRUCT__entry(
+		__array(	 char,	bdi, 32)
+		__field(unsigned long,	limit)
+		__field(unsigned long,	setpoint)
+		__field(unsigned long,	dirty)
+		__field(unsigned long,	bdi_setpoint)
+		__field(unsigned long,	bdi_dirty)
+		__field(unsigned long,	dirty_ratelimit)
+		__field(unsigned long,	task_ratelimit)
+		__field(unsigned int,	dirtied)
+		__field(unsigned int,	dirtied_pause)
+		__field(unsigned long,	paused)
+		__field(	 long,	pause)
+	),
+
+	TP_fast_assign(
+		unsigned long freerun = (thresh + bg_thresh) / 2;
+		strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+
+		__entry->limit		= global_dirty_limit;
+		__entry->setpoint	= (global_dirty_limit + freerun) / 2;
+		__entry->dirty		= dirty;
+		__entry->bdi_setpoint	= __entry->setpoint *
+						bdi_thresh / (thresh + 1);
+		__entry->bdi_dirty	= bdi_dirty;
+		__entry->dirty_ratelimit = KBps(dirty_ratelimit);
+		__entry->task_ratelimit	= KBps(task_ratelimit);
+		__entry->dirtied	= dirtied;
+		__entry->dirtied_pause	= current->nr_dirtied_pause;
+		__entry->pause		= pause * 1000 / HZ;
+		__entry->paused		= (jiffies - start_time) * 1000 / HZ;
+	),
+
+
+	TP_printk("bdi %s: "
+		  "limit=%lu setpoint=%lu dirty=%lu "
+		  "bdi_setpoint=%lu bdi_dirty=%lu "
+		  "dirty_ratelimit=%lu task_ratelimit=%lu "
+		  "dirtied=%u dirtied_pause=%u "
+		  "paused=%lu pause=%ld",
+		  __entry->bdi,
+		  __entry->limit,
+		  __entry->setpoint,
+		  __entry->dirty,
+		  __entry->bdi_setpoint,
+		  __entry->bdi_dirty,
+		  __entry->dirty_ratelimit,
+		  __entry->task_ratelimit,
+		  __entry->dirtied,
+		  __entry->dirtied_pause,
+		  __entry->paused,	/* ms */
+		  __entry->pause	/* ms */
+	  )
+);
+
 DECLARE_EVENT_CLASS(writeback_congest_waited_template,
 
 	TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index b66ebb2..378c7ed 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -307,15 +307,8 @@
 	void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
 };
 
-#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
 /* Init with the board info */
 extern int omap_display_init(struct omap_dss_board_info *board_data);
-#else
-static inline int omap_display_init(struct omap_dss_board_info *board_data)
-{
-	return 0;
-}
-#endif
 
 struct omap_display_platform_data {
 	struct omap_dss_board_info *board_data;
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index 6b99bfb..11e2dfc 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -43,7 +43,6 @@
 #include <xen/interface/grant_table.h>
 
 #include <asm/xen/hypervisor.h>
-#include <asm/xen/grant_table.h>
 
 #include <xen/features.h>
 
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
index 3d5d6db..9324488 100644
--- a/include/xen/interface/io/blkif.h
+++ b/include/xen/interface/io/blkif.h
@@ -57,6 +57,36 @@
  * "feature-flush-cache" node!
  */
 #define BLKIF_OP_FLUSH_DISKCACHE   3
+
+/*
+ * Recognised only if "feature-discard" is present in backend xenbus info.
+ * The "feature-discard" node contains a boolean indicating whether trim
+ * (ATA) or unmap (SCSI) - conviently called discard requests are likely
+ * to succeed or fail. Either way, a discard request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt discard requests.
+ * If a backend does not recognise BLKIF_OP_DISCARD, it should *not*
+ * create the "feature-discard" node!
+ *
+ * Discard operation is a request for the underlying block device to mark
+ * extents to be erased. However, discard does not guarantee that the blocks
+ * will be erased from the device - it is just a hint to the device
+ * controller that these blocks are no longer in use. What the device
+ * controller does with that information is left to the controller.
+ * Discard operations are passed with sector_number as the
+ * sector index to begin discard operations at and nr_sectors as the number of
+ * sectors to be discarded. The specified sectors should be discarded if the
+ * underlying block device supports trim (ATA) or unmap (SCSI) operations,
+ * or a BLKIF_RSP_EOPNOTSUPP  should be returned.
+ * More information about trim/unmap operations at:
+ * http://t13.org/Documents/UploadedDocuments/docs2008/
+ *     e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc
+ * http://www.seagate.com/staticfiles/support/disc/manuals/
+ *     Interface%20manuals/100293068c.pdf
+ */
+#define BLKIF_OP_DISCARD           5
+
 /*
  * Maximum scatter/gather segments per request.
  * This is carefully chosen so that sizeof(struct blkif_ring) <= PAGE_SIZE.
@@ -74,6 +104,11 @@
 	} seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 };
 
+struct blkif_request_discard {
+	blkif_sector_t sector_number;
+	uint64_t nr_sectors;
+};
+
 struct blkif_request {
 	uint8_t        operation;    /* BLKIF_OP_???                         */
 	uint8_t        nr_segments;  /* number of segments                   */
@@ -81,6 +116,7 @@
 	uint64_t       id;           /* private guest value, echoed in resp  */
 	union {
 		struct blkif_request_rw rw;
+		struct blkif_request_discard discard;
 	} u;
 };
 
diff --git a/include/xen/interface/platform.h b/include/xen/interface/platform.h
new file mode 100644
index 0000000..c168468
--- /dev/null
+++ b/include/xen/interface/platform.h
@@ -0,0 +1,320 @@
+/******************************************************************************
+ * platform.h
+ *
+ * Hardware platform operations. Intended for use by domain-0 kernel.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2002-2006, K Fraser
+ */
+
+#ifndef __XEN_PUBLIC_PLATFORM_H__
+#define __XEN_PUBLIC_PLATFORM_H__
+
+#include "xen.h"
+
+#define XENPF_INTERFACE_VERSION 0x03000001
+
+/*
+ * Set clock such that it would read <secs,nsecs> after 00:00:00 UTC,
+ * 1 January, 1970 if the current system time was <system_time>.
+ */
+#define XENPF_settime             17
+struct xenpf_settime {
+	/* IN variables. */
+	uint32_t secs;
+	uint32_t nsecs;
+	uint64_t system_time;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_settime_t);
+
+/*
+ * Request memory range (@mfn, @mfn+@nr_mfns-1) to have type @type.
+ * On x86, @type is an architecture-defined MTRR memory type.
+ * On success, returns the MTRR that was used (@reg) and a handle that can
+ * be passed to XENPF_DEL_MEMTYPE to accurately tear down the new setting.
+ * (x86-specific).
+ */
+#define XENPF_add_memtype         31
+struct xenpf_add_memtype {
+	/* IN variables. */
+	unsigned long mfn;
+	uint64_t nr_mfns;
+	uint32_t type;
+	/* OUT variables. */
+	uint32_t handle;
+	uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_add_memtype_t);
+
+/*
+ * Tear down an existing memory-range type. If @handle is remembered then it
+ * should be passed in to accurately tear down the correct setting (in case
+ * of overlapping memory regions with differing types). If it is not known
+ * then @handle should be set to zero. In all cases @reg must be set.
+ * (x86-specific).
+ */
+#define XENPF_del_memtype         32
+struct xenpf_del_memtype {
+	/* IN variables. */
+	uint32_t handle;
+	uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_del_memtype_t);
+
+/* Read current type of an MTRR (x86-specific). */
+#define XENPF_read_memtype        33
+struct xenpf_read_memtype {
+	/* IN variables. */
+	uint32_t reg;
+	/* OUT variables. */
+	unsigned long mfn;
+	uint64_t nr_mfns;
+	uint32_t type;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_read_memtype_t);
+
+#define XENPF_microcode_update    35
+struct xenpf_microcode_update {
+	/* IN variables. */
+	GUEST_HANDLE(void) data;          /* Pointer to microcode data */
+	uint32_t length;                  /* Length of microcode data. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_microcode_update_t);
+
+#define XENPF_platform_quirk      39
+#define QUIRK_NOIRQBALANCING      1 /* Do not restrict IO-APIC RTE targets */
+#define QUIRK_IOAPIC_BAD_REGSEL   2 /* IO-APIC REGSEL forgets its value    */
+#define QUIRK_IOAPIC_GOOD_REGSEL  3 /* IO-APIC REGSEL behaves properly     */
+struct xenpf_platform_quirk {
+	/* IN variables. */
+	uint32_t quirk_id;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_platform_quirk_t);
+
+#define XENPF_firmware_info       50
+#define XEN_FW_DISK_INFO          1 /* from int 13 AH=08/41/48 */
+#define XEN_FW_DISK_MBR_SIGNATURE 2 /* from MBR offset 0x1b8 */
+#define XEN_FW_VBEDDC_INFO        3 /* from int 10 AX=4f15 */
+struct xenpf_firmware_info {
+	/* IN variables. */
+	uint32_t type;
+	uint32_t index;
+	/* OUT variables. */
+	union {
+		struct {
+			/* Int13, Fn48: Check Extensions Present. */
+			uint8_t device;                   /* %dl: bios device number */
+			uint8_t version;                  /* %ah: major version      */
+			uint16_t interface_support;       /* %cx: support bitmap     */
+			/* Int13, Fn08: Legacy Get Device Parameters. */
+			uint16_t legacy_max_cylinder;     /* %cl[7:6]:%ch: max cyl # */
+			uint8_t legacy_max_head;          /* %dh: max head #         */
+			uint8_t legacy_sectors_per_track; /* %cl[5:0]: max sector #  */
+			/* Int13, Fn41: Get Device Parameters (as filled into %ds:%esi). */
+			/* NB. First uint16_t of buffer must be set to buffer size.      */
+			GUEST_HANDLE(void) edd_params;
+		} disk_info; /* XEN_FW_DISK_INFO */
+		struct {
+			uint8_t device;                   /* bios device number  */
+			uint32_t mbr_signature;           /* offset 0x1b8 in mbr */
+		} disk_mbr_signature; /* XEN_FW_DISK_MBR_SIGNATURE */
+		struct {
+			/* Int10, AX=4F15: Get EDID info. */
+			uint8_t capabilities;
+			uint8_t edid_transfer_time;
+			/* must refer to 128-byte buffer */
+			GUEST_HANDLE(uchar) edid;
+		} vbeddc_info; /* XEN_FW_VBEDDC_INFO */
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_firmware_info_t);
+
+#define XENPF_enter_acpi_sleep    51
+struct xenpf_enter_acpi_sleep {
+	/* IN variables */
+	uint16_t pm1a_cnt_val;      /* PM1a control value. */
+	uint16_t pm1b_cnt_val;      /* PM1b control value. */
+	uint32_t sleep_state;       /* Which state to enter (Sn). */
+	uint32_t flags;             /* Must be zero. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_enter_acpi_sleep_t);
+
+#define XENPF_change_freq         52
+struct xenpf_change_freq {
+	/* IN variables */
+	uint32_t flags; /* Must be zero. */
+	uint32_t cpu;   /* Physical cpu. */
+	uint64_t freq;  /* New frequency (Hz). */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_change_freq_t);
+
+/*
+ * Get idle times (nanoseconds since boot) for physical CPUs specified in the
+ * @cpumap_bitmap with range [0..@cpumap_nr_cpus-1]. The @idletime array is
+ * indexed by CPU number; only entries with the corresponding @cpumap_bitmap
+ * bit set are written to. On return, @cpumap_bitmap is modified so that any
+ * non-existent CPUs are cleared. Such CPUs have their @idletime array entry
+ * cleared.
+ */
+#define XENPF_getidletime         53
+struct xenpf_getidletime {
+	/* IN/OUT variables */
+	/* IN: CPUs to interrogate; OUT: subset of IN which are present */
+	GUEST_HANDLE(uchar) cpumap_bitmap;
+	/* IN variables */
+	/* Size of cpumap bitmap. */
+	uint32_t cpumap_nr_cpus;
+	/* Must be indexable for every cpu in cpumap_bitmap. */
+	GUEST_HANDLE(uint64_t) idletime;
+	/* OUT variables */
+	/* System time when the idletime snapshots were taken. */
+	uint64_t now;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t);
+
+#define XENPF_set_processor_pminfo      54
+
+/* ability bits */
+#define XEN_PROCESSOR_PM_CX	1
+#define XEN_PROCESSOR_PM_PX	2
+#define XEN_PROCESSOR_PM_TX	4
+
+/* cmd type */
+#define XEN_PM_CX   0
+#define XEN_PM_PX   1
+#define XEN_PM_TX   2
+
+/* Px sub info type */
+#define XEN_PX_PCT   1
+#define XEN_PX_PSS   2
+#define XEN_PX_PPC   4
+#define XEN_PX_PSD   8
+
+struct xen_power_register {
+	uint32_t     space_id;
+	uint32_t     bit_width;
+	uint32_t     bit_offset;
+	uint32_t     access_size;
+	uint64_t     address;
+};
+
+struct xen_processor_csd {
+	uint32_t    domain;      /* domain number of one dependent group */
+	uint32_t    coord_type;  /* coordination type */
+	uint32_t    num;         /* number of processors in same domain */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_csd);
+
+struct xen_processor_cx {
+	struct xen_power_register  reg; /* GAS for Cx trigger register */
+	uint8_t     type;     /* cstate value, c0: 0, c1: 1, ... */
+	uint32_t    latency;  /* worst latency (ms) to enter/exit this cstate */
+	uint32_t    power;    /* average power consumption(mW) */
+	uint32_t    dpcnt;    /* number of dependency entries */
+	GUEST_HANDLE(xen_processor_csd) dp; /* NULL if no dependency */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_cx);
+
+struct xen_processor_flags {
+	uint32_t bm_control:1;
+	uint32_t bm_check:1;
+	uint32_t has_cst:1;
+	uint32_t power_setup_done:1;
+	uint32_t bm_rld_set:1;
+};
+
+struct xen_processor_power {
+	uint32_t count;  /* number of C state entries in array below */
+	struct xen_processor_flags flags;  /* global flags of this processor */
+	GUEST_HANDLE(xen_processor_cx) states; /* supported c states */
+};
+
+struct xen_pct_register {
+	uint8_t  descriptor;
+	uint16_t length;
+	uint8_t  space_id;
+	uint8_t  bit_width;
+	uint8_t  bit_offset;
+	uint8_t  reserved;
+	uint64_t address;
+};
+
+struct xen_processor_px {
+	uint64_t core_frequency; /* megahertz */
+	uint64_t power;      /* milliWatts */
+	uint64_t transition_latency; /* microseconds */
+	uint64_t bus_master_latency; /* microseconds */
+	uint64_t control;        /* control value */
+	uint64_t status;     /* success indicator */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_px);
+
+struct xen_psd_package {
+	uint64_t num_entries;
+	uint64_t revision;
+	uint64_t domain;
+	uint64_t coord_type;
+	uint64_t num_processors;
+};
+
+struct xen_processor_performance {
+	uint32_t flags;     /* flag for Px sub info type */
+	uint32_t platform_limit;  /* Platform limitation on freq usage */
+	struct xen_pct_register control_register;
+	struct xen_pct_register status_register;
+	uint32_t state_count;     /* total available performance states */
+	GUEST_HANDLE(xen_processor_px) states;
+	struct xen_psd_package domain_info;
+	uint32_t shared_type;     /* coordination type of this processor */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_performance);
+
+struct xenpf_set_processor_pminfo {
+	/* IN variables */
+	uint32_t id;    /* ACPI CPU ID */
+	uint32_t type;  /* {XEN_PM_CX, XEN_PM_PX} */
+	union {
+		struct xen_processor_power          power;/* Cx: _CST/_CSD */
+		struct xen_processor_performance    perf; /* Px: _PPC/_PCT/_PSS/_PSD */
+	};
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_set_processor_pminfo);
+
+struct xen_platform_op {
+	uint32_t cmd;
+	uint32_t interface_version; /* XENPF_INTERFACE_VERSION */
+	union {
+		struct xenpf_settime           settime;
+		struct xenpf_add_memtype       add_memtype;
+		struct xenpf_del_memtype       del_memtype;
+		struct xenpf_read_memtype      read_memtype;
+		struct xenpf_microcode_update  microcode;
+		struct xenpf_platform_quirk    platform_quirk;
+		struct xenpf_firmware_info     firmware_info;
+		struct xenpf_enter_acpi_sleep  enter_acpi_sleep;
+		struct xenpf_change_freq       change_freq;
+		struct xenpf_getidletime       getidletime;
+		struct xenpf_set_processor_pminfo set_pminfo;
+		uint8_t                        pad[128];
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_platform_op_t);
+
+#endif /* __XEN_PUBLIC_PLATFORM_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
index 6acd9ce..6a6e914 100644
--- a/include/xen/interface/xen.h
+++ b/include/xen/interface/xen.h
@@ -492,6 +492,7 @@
 /* These flags are passed in the 'flags' field of start_info_t. */
 #define SIF_PRIVILEGED    (1<<0)  /* Is the domain privileged? */
 #define SIF_INITDOMAIN    (1<<1)  /* Is this the initial control domain? */
+#define SIF_PM_MASK       (0xFF<<8) /* reserve 1 byte for xen-pm options */
 
 typedef uint64_t cpumap_t;
 
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
index a785a3b..438c256 100644
--- a/include/xen/platform_pci.h
+++ b/include/xen/platform_pci.h
@@ -29,8 +29,7 @@
 static inline int xen_must_unplug_nics(void) {
 #if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
 		defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
-		(defined(CONFIG_XEN_PLATFORM_PCI) || \
-		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+		defined(CONFIG_XEN_PVHVM)
         return 1;
 #else
         return 0;
@@ -40,8 +39,7 @@
 static inline int xen_must_unplug_disks(void) {
 #if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
 		defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
-		(defined(CONFIG_XEN_PLATFORM_PCI) || \
-		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+		defined(CONFIG_XEN_PVHVM)
         return 1;
 #else
         return 0;
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
index b9f9fb5..b1b6676 100644
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -37,6 +37,7 @@
 #include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 #include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/slab.h>
diff --git a/init/main.c b/init/main.c
index 63f5f6f..217ed23 100644
--- a/init/main.c
+++ b/init/main.c
@@ -512,6 +512,9 @@
 	parse_args("Booting kernel", static_command_line, __start___param,
 		   __stop___param - __start___param,
 		   &unknown_bootoption);
+
+	jump_label_init();
+
 	/*
 	 * These use large bootmem allocations and must precede
 	 * kmem_cache_init()
diff --git a/kernel/async.c b/kernel/async.c
index 4c2843c..80b74b88 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -51,7 +51,7 @@
 #include <linux/async.h>
 #include <linux/atomic.h>
 #include <linux/ktime.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
diff --git a/kernel/audit.c b/kernel/audit.c
index 0a1355c..09fae26 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -45,7 +45,7 @@
 #include <asm/types.h>
 #include <linux/atomic.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/kthread.h>
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index ce4b054..47b7fc1 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -48,7 +48,7 @@
 #include <linux/fs.h>
 #include <linux/namei.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/mount.h>
 #include <linux/socket.h>
diff --git a/kernel/capability.c b/kernel/capability.c
index 283c529..b463871 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -10,7 +10,7 @@
 #include <linux/audit.h>
 #include <linux/capability.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
 #include <linux/pid_namespace.h>
diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c
index e691818..213c035 100644
--- a/kernel/cgroup_freezer.c
+++ b/kernel/cgroup_freezer.c
@@ -14,7 +14,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/cgroup.h>
 #include <linux/fs.h>
@@ -153,6 +153,13 @@
 	kfree(cgroup_freezer(cgroup));
 }
 
+/* task is frozen or will freeze immediately when next it gets woken */
+static bool is_task_frozen_enough(struct task_struct *task)
+{
+	return frozen(task) ||
+		(task_is_stopped_or_traced(task) && freezing(task));
+}
+
 /*
  * The call to cgroup_lock() in the freezer.state write method prevents
  * a write to that file racing against an attach, and hence the
@@ -231,7 +238,7 @@
 	cgroup_iter_start(cgroup, &it);
 	while ((task = cgroup_iter_next(cgroup, &it))) {
 		ntotal++;
-		if (frozen(task))
+		if (is_task_frozen_enough(task))
 			nfrozen++;
 	}
 
@@ -284,7 +291,7 @@
 	while ((task = cgroup_iter_next(cgroup, &it))) {
 		if (!freeze_task(task, true))
 			continue;
-		if (frozen(task))
+		if (is_task_frozen_enough(task))
 			continue;
 		if (!freezing(task) && !freezer_should_skip(task))
 			num_cant_freeze_now++;
diff --git a/kernel/compat.c b/kernel/compat.c
index e2435ee..f346ced 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -21,6 +21,7 @@
 #include <linux/unistd.h>
 #include <linux/security.h>
 #include <linux/timex.h>
+#include <linux/export.h>
 #include <linux/migrate.h>
 #include <linux/posix-timers.h>
 #include <linux/times.h>
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 12b7458..563f136 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -10,11 +10,12 @@
 #include <linux/sched.h>
 #include <linux/unistd.h>
 #include <linux/cpu.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kthread.h>
 #include <linux/stop_machine.h>
 #include <linux/mutex.h>
 #include <linux/gfp.h>
+#include <linux/suspend.h>
 
 #ifdef CONFIG_SMP
 /* Serializes the updates to cpu_online_mask, cpu_present_mask */
@@ -476,6 +477,79 @@
 	return 0;
 }
 core_initcall(alloc_frozen_cpus);
+
+/*
+ * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
+ * hotplug when tasks are about to be frozen. Also, don't allow the freezer
+ * to continue until any currently running CPU hotplug operation gets
+ * completed.
+ * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
+ * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
+ * CPU hotplug path and released only after it is complete. Thus, we
+ * (and hence the freezer) will block here until any currently running CPU
+ * hotplug operation gets completed.
+ */
+void cpu_hotplug_disable_before_freeze(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 1;
+	cpu_maps_update_done();
+}
+
+
+/*
+ * When tasks have been thawed, re-enable regular CPU hotplug (which had been
+ * disabled while beginning to freeze tasks).
+ */
+void cpu_hotplug_enable_after_thaw(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 0;
+	cpu_maps_update_done();
+}
+
+/*
+ * When callbacks for CPU hotplug notifications are being executed, we must
+ * ensure that the state of the system with respect to the tasks being frozen
+ * or not, as reported by the notification, remains unchanged *throughout the
+ * duration* of the execution of the callbacks.
+ * Hence we need to prevent the freezer from racing with regular CPU hotplug.
+ *
+ * This synchronization is implemented by mutually excluding regular CPU
+ * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
+ * Hibernate notifications.
+ */
+static int
+cpu_hotplug_pm_callback(struct notifier_block *nb,
+			unsigned long action, void *ptr)
+{
+	switch (action) {
+
+	case PM_SUSPEND_PREPARE:
+	case PM_HIBERNATION_PREPARE:
+		cpu_hotplug_disable_before_freeze();
+		break;
+
+	case PM_POST_SUSPEND:
+	case PM_POST_HIBERNATION:
+		cpu_hotplug_enable_after_thaw();
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+
+int cpu_hotplug_pm_sync_init(void)
+{
+	pm_notifier(cpu_hotplug_pm_callback, 0);
+	return 0;
+}
+core_initcall(cpu_hotplug_pm_sync_init);
+
 #endif /* CONFIG_PM_SLEEP_SMP */
 
 /**
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index ed0ff44..9fe58c4 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -37,7 +37,7 @@
 #include <linux/mempolicy.h>
 #include <linux/mm.h>
 #include <linux/memory.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/pagemap.h>
diff --git a/kernel/crash_dump.c b/kernel/crash_dump.c
index 69ebf33..c766ee5 100644
--- a/kernel/crash_dump.c
+++ b/kernel/crash_dump.c
@@ -2,7 +2,7 @@
 #include <linux/crash_dump.h>
 #include <linux/init.h>
 #include <linux/errno.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 /*
  * If we have booted due to a crash, max_pfn will be a very low value. We need
diff --git a/kernel/cred.c b/kernel/cred.c
index bb55d05..5791612 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -8,7 +8,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the Licence, or (at your option) any later version.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/cred.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c
index d9ca9aa..8b68ce7 100644
--- a/kernel/debug/kdb/kdb_debugger.c
+++ b/kernel/debug/kdb/kdb_debugger.c
@@ -11,6 +11,7 @@
 #include <linux/kgdb.h>
 #include <linux/kdb.h>
 #include <linux/kdebug.h>
+#include <linux/export.h>
 #include "kdb_private.h"
 #include "../debug_core.h"
 
diff --git a/kernel/dma.c b/kernel/dma.c
index f903189..68a2306 100644
--- a/kernel/dma.c
+++ b/kernel/dma.c
@@ -9,7 +9,7 @@
  *   [It also happened to remove the sizeof(char *) == sizeof(int)
  *   assumption introduced because of those /proc/dma patches. -- Hennus]
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>
diff --git a/kernel/events/core.c b/kernel/events/core.c
index e1253fa..0e8457d 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -25,6 +25,7 @@
 #include <linux/reboot.h>
 #include <linux/vmstat.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/vmalloc.h>
 #include <linux/hardirq.h>
 #include <linux/rculist.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 70d7619..da4a6a1 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -162,7 +162,6 @@
 
 void free_task(struct task_struct *tsk)
 {
-	prop_local_destroy_single(&tsk->dirties);
 	account_kernel_stack(tsk->stack, -1);
 	free_thread_info(tsk->stack);
 	rt_mutex_debug_task_free(tsk);
@@ -274,10 +273,6 @@
 
 	tsk->stack = ti;
 
-	err = prop_local_init_single(&tsk->dirties);
-	if (err)
-		goto out;
-
 	setup_thread_stack(tsk, orig);
 	clear_user_return_notifier(tsk);
 	clear_tsk_need_resched(tsk);
@@ -1299,6 +1294,9 @@
 	p->pdeath_signal = 0;
 	p->exit_state = 0;
 
+	p->nr_dirtied = 0;
+	p->nr_dirtied_pause = 128 >> (PAGE_SHIFT - 10);
+
 	/*
 	 * Ok, make it visible to the rest of the system.
 	 * We dont wake it up yet.
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 66a594e..7be56c5 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -6,7 +6,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/suspend.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/syscalls.h>
 #include <linux/freezer.h>
 
@@ -67,7 +67,7 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&p->sighand->siglock, flags);
-	signal_wake_up(p, 1);
+	signal_wake_up(p, 0);
 	spin_unlock_irqrestore(&p->sighand->siglock, flags);
 }
 
diff --git a/kernel/futex.c b/kernel/futex.c
index 1511dff..ea87f4d 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -55,7 +55,7 @@
 #include <linux/pagemap.h>
 #include <linux/syscalls.h>
 #include <linux/signal.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/magic.h>
 #include <linux/pid.h>
 #include <linux/nsproxy.h>
diff --git a/kernel/groups.c b/kernel/groups.c
index 1cc476d..99b53d1 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -2,7 +2,7 @@
  * Supplementary group IDs
  */
 #include <linux/cred.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index a9205e3..ae34bf5 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -32,7 +32,7 @@
  */
 
 #include <linux/cpu.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/percpu.h>
 #include <linux/hrtimer.h>
 #include <linux/notifier.h>
@@ -885,10 +885,13 @@
 			     struct hrtimer_clock_base *base,
 			     unsigned long newstate, int reprogram)
 {
+	struct timerqueue_node *next_timer;
 	if (!(timer->state & HRTIMER_STATE_ENQUEUED))
 		goto out;
 
-	if (&timer->node == timerqueue_getnext(&base->active)) {
+	next_timer = timerqueue_getnext(&base->active);
+	timerqueue_del(&base->active, &timer->node);
+	if (&timer->node == next_timer) {
 #ifdef CONFIG_HIGH_RES_TIMERS
 		/* Reprogram the clock event device. if enabled */
 		if (reprogram && hrtimer_hres_active()) {
@@ -901,7 +904,6 @@
 		}
 #endif
 	}
-	timerqueue_del(&base->active, &timer->node);
 	if (!timerqueue_getnext(&base->active))
 		base->cpu_base->active_bases &= ~(1 << base->index);
 out:
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index ea64012..8b1748d 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -13,7 +13,7 @@
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/lockdep.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sysctl.h>
 
 /*
diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c
index 6cb7613..c89295a 100644
--- a/kernel/irq/generic-chip.c
+++ b/kernel/irq/generic-chip.c
@@ -6,6 +6,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/syscore_ops.h>
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 1550e84..d86e254 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -9,7 +9,7 @@
  */
 #include <linux/irq.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/radix-tree.h>
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 67ce837..0e2b179 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1596,7 +1596,7 @@
 		return -ENOMEM;
 
 	action->handler = handler;
-	action->flags = IRQF_PERCPU;
+	action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND;
 	action->name = devname;
 	action->percpu_dev_id = dev_id;
 
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index aa57d5d..dc813a9 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -84,7 +84,9 @@
 	 */
 	action = desc->action;
 	if (!action || !(action->flags & IRQF_SHARED) ||
-	    (action->flags & __IRQF_TIMER) || !action->next)
+	    (action->flags & __IRQF_TIMER) ||
+	    (action->handler(irq, action->dev_id) == IRQ_HANDLED) ||
+	    !action->next)
 		goto out;
 
 	/* Already running on another processor */
@@ -115,7 +117,7 @@
 	struct irq_desc *desc;
 	int i, ok = 0;
 
-	if (atomic_inc_return(&irq_poll_active) == 1)
+	if (atomic_inc_return(&irq_poll_active) != 1)
 		goto out;
 
 	irq_poll_cpu = smp_processor_id();
diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index 0e2cde4..c3c46c7 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -6,9 +6,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/irq_work.h>
+#include <linux/percpu.h>
 #include <linux/hardirq.h>
+#include <asm/processor.h>
 
 /*
  * An entry can be in one of four states:
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index a8ce450..bbdfe2a 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -104,6 +104,18 @@
 	return 0;
 }
 
+/* 
+ * Update code which is definitely not currently executing.
+ * Architectures which need heavyweight synchronization to modify
+ * running code can override this to make the non-live update case
+ * cheaper.
+ */
+void __weak arch_jump_label_transform_static(struct jump_entry *entry,
+					    enum jump_label_type type)
+{
+	arch_jump_label_transform(entry, type);	
+}
+
 static void __jump_label_update(struct jump_label_key *key,
 				struct jump_entry *entry,
 				struct jump_entry *stop, int enable)
@@ -121,14 +133,7 @@
 	}
 }
 
-/*
- * Not all archs need this.
- */
-void __weak arch_jump_label_text_poke_early(jump_label_t addr)
-{
-}
-
-static __init int jump_label_init(void)
+void __init jump_label_init(void)
 {
 	struct jump_entry *iter_start = __start___jump_table;
 	struct jump_entry *iter_stop = __stop___jump_table;
@@ -139,22 +144,22 @@
 	jump_label_sort_entries(iter_start, iter_stop);
 
 	for (iter = iter_start; iter < iter_stop; iter++) {
-		arch_jump_label_text_poke_early(iter->code);
-		if (iter->key == (jump_label_t)(unsigned long)key)
+		struct jump_label_key *iterk;
+
+		iterk = (struct jump_label_key *)(unsigned long)iter->key;
+		arch_jump_label_transform_static(iter, jump_label_enabled(iterk) ?
+						 JUMP_LABEL_ENABLE : JUMP_LABEL_DISABLE);
+		if (iterk == key)
 			continue;
 
-		key = (struct jump_label_key *)(unsigned long)iter->key;
-		atomic_set(&key->enabled, 0);
+		key = iterk;
 		key->entries = iter;
 #ifdef CONFIG_MODULES
 		key->next = NULL;
 #endif
 	}
 	jump_label_unlock();
-
-	return 0;
 }
-early_initcall(jump_label_init);
 
 #ifdef CONFIG_MODULES
 
@@ -212,7 +217,7 @@
 		return;
 
 	for (iter = iter_start; iter < iter_stop; iter++)
-		arch_jump_label_text_poke_early(iter->code);
+		arch_jump_label_transform_static(iter, JUMP_LABEL_DISABLE);
 }
 
 static int jump_label_add_module(struct module *mod)
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index 01a0700..c744b88 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -20,7 +20,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/log2.h>
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 2f193d0..e5d8464 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -36,7 +36,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/stddef.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/moduleloader.h>
 #include <linux/kallsyms.h>
 #include <linux/freezer.h>
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 3b053c0..4e316e1 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -11,10 +11,11 @@
 #include <linux/kobject.h>
 #include <linux/string.h>
 #include <linux/sysfs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/profile.h>
+#include <linux/stat.h>
 #include <linux/sched.h>
 #include <linux/capability.h>
 
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 4ba7ccc..b6d216a 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -12,7 +12,7 @@
 #include <linux/cpuset.h>
 #include <linux/unistd.h>
 #include <linux/file.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/freezer.h>
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 4ac8ebf..a462b31 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -53,7 +53,7 @@
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/proc_fs.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/stacktrace.h>
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index 71edd2f..91c32a0 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -11,7 +11,7 @@
  * Code for /proc/lockdep and /proc/lockdep_stats:
  *
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
diff --git a/kernel/module.c b/kernel/module.c
index 93342d9..178333c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -16,7 +16,7 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/moduleloader.h>
 #include <linux/ftrace_event.h>
 #include <linux/init.h>
@@ -2487,6 +2487,9 @@
 		return -ENOEXEC;
 	}
 
+	if (!get_modinfo(info, "intree"))
+		add_taint_module(mod, TAINT_OOT_MODULE);
+
 	if (get_modinfo(info, "staging")) {
 		add_taint_module(mod, TAINT_CRAP);
 		printk(KERN_WARNING "%s: module is from the staging directory,"
@@ -2878,8 +2881,7 @@
 	}
 
 	/* This has to be done once we're sure module name is unique. */
-	if (!mod->taints || mod->taints == (1U<<TAINT_CRAP))
-		dynamic_debug_setup(info.debug, info.num_debug);
+	dynamic_debug_setup(info.debug, info.num_debug);
 
 	/* Find duplicate symbols */
 	err = verify_export_symbols(mod);
@@ -2915,8 +2917,7 @@
 	module_bug_cleanup(mod);
 
  ddebug:
-	if (!mod->taints || mod->taints == (1U<<TAINT_CRAP))
-		dynamic_debug_remove(info.debug);
+	dynamic_debug_remove(info.debug);
  unlock:
 	mutex_unlock(&module_mutex);
 	synchronize_sched();
@@ -3257,6 +3258,8 @@
 		buf[bx++] = '(';
 		if (mod->taints & (1 << TAINT_PROPRIETARY_MODULE))
 			buf[bx++] = 'P';
+		else if (mod->taints & (1 << TAINT_OOT_MODULE))
+			buf[bx++] = 'O';
 		if (mod->taints & (1 << TAINT_FORCED_MODULE))
 			buf[bx++] = 'F';
 		if (mod->taints & (1 << TAINT_CRAP))
diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c
index 73da83a..7e3443f 100644
--- a/kernel/mutex-debug.c
+++ b/kernel/mutex-debug.c
@@ -14,7 +14,7 @@
  */
 #include <linux/mutex.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/poison.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
diff --git a/kernel/mutex.c b/kernel/mutex.c
index d607ed5..89096dd 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -19,7 +19,7 @@
  */
 #include <linux/mutex.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/debug_locks.h>
diff --git a/kernel/notifier.c b/kernel/notifier.c
index 8d7b435..2d5cc4c 100644
--- a/kernel/notifier.c
+++ b/kernel/notifier.c
@@ -1,6 +1,6 @@
 #include <linux/kdebug.h>
 #include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/notifier.h>
 #include <linux/rcupdate.h>
 #include <linux/vmalloc.h>
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 9aeab4b..b576f7f 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -14,7 +14,7 @@
  */
 
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/nsproxy.h>
 #include <linux/init_task.h>
 #include <linux/mnt_namespace.h>
diff --git a/kernel/padata.c b/kernel/padata.c
index b91941d..b452599 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -18,7 +18,7 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/cpu.h>
diff --git a/kernel/panic.c b/kernel/panic.c
index d7bb697..b2659360 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -177,6 +177,7 @@
 	{ TAINT_WARN,			'W', ' ' },
 	{ TAINT_CRAP,			'C', ' ' },
 	{ TAINT_FIRMWARE_WORKAROUND,	'I', ' ' },
+	{ TAINT_OOT_MODULE,		'O', ' ' },
 };
 
 /**
@@ -194,6 +195,7 @@
  *  'W' - Taint on warning.
  *  'C' - modules from drivers/staging are loaded.
  *  'I' - Working around severe firmware bug.
+ *  'O' - Out-of-tree module has been loaded.
  *
  *	The string is overwritten by the next call to print_tainted().
  */
diff --git a/kernel/params.c b/kernel/params.c
index 8217889..65aae11e 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -15,7 +15,7 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/errno.h>
diff --git a/kernel/pid.c b/kernel/pid.c
index 8cafe7e..fa5f722 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -27,7 +27,7 @@
  */
 
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/rculist.h>
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 4556182..69185ae 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -46,7 +46,7 @@
 #include <linux/syscalls.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 /*
  * Management arrays for POSIX timers.	 Timers are kept in slab memory
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 1c53f7f..a6b0503 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -9,6 +9,7 @@
  * This file is released under the GPLv2.
  */
 
+#include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/syscalls.h>
 #include <linux/reboot.h>
@@ -54,6 +55,8 @@
 
 static int hibernation_mode = HIBERNATION_SHUTDOWN;
 
+static bool freezer_test_done;
+
 static const struct platform_hibernation_ops *hibernation_ops;
 
 /**
@@ -344,11 +347,24 @@
 
 	error = freeze_kernel_threads();
 	if (error)
-		goto Close;
+		goto Cleanup;
+
+	if (hibernation_test(TEST_FREEZER) ||
+		hibernation_testmode(HIBERNATION_TESTPROC)) {
+
+		/*
+		 * Indicate to the caller that we are returning due to a
+		 * successful freezer test.
+		 */
+		freezer_test_done = true;
+		goto Cleanup;
+	}
 
 	error = dpm_prepare(PMSG_FREEZE);
-	if (error)
-		goto Complete_devices;
+	if (error) {
+		dpm_complete(msg);
+		goto Cleanup;
+	}
 
 	suspend_console();
 	pm_restrict_gfp_mask();
@@ -377,8 +393,6 @@
 		pm_restore_gfp_mask();
 
 	resume_console();
-
- Complete_devices:
 	dpm_complete(msg);
 
  Close:
@@ -388,6 +402,10 @@
  Recover_platform:
 	platform_recover(platform_mode);
 	goto Resume_devices;
+
+ Cleanup:
+	swsusp_free();
+	goto Close;
 }
 
 /**
@@ -640,15 +658,13 @@
 	if (error)
 		goto Finish;
 
-	if (hibernation_test(TEST_FREEZER))
-		goto Thaw;
-
-	if (hibernation_testmode(HIBERNATION_TESTPROC))
-		goto Thaw;
-
 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
 	if (error)
 		goto Thaw;
+	if (freezer_test_done) {
+		freezer_test_done = false;
+		goto Thaw;
+	}
 
 	if (in_suspend) {
 		unsigned int flags = 0;
diff --git a/kernel/power/main.c b/kernel/power/main.c
index a52e884..36e0f09 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/export.h>
 #include <linux/kobject.h>
 #include <linux/string.h>
 #include <linux/resume-trace.h>
@@ -289,13 +290,14 @@
 		if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
 			break;
 	}
-	if (state < PM_SUSPEND_MAX && *s)
+	if (state < PM_SUSPEND_MAX && *s) {
 		error = enter_state(state);
 		if (error) {
 			suspend_stats.fail++;
 			dpm_save_failed_errno(error);
 		} else
 			suspend_stats.success++;
+	}
 #endif
 
  Exit:
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 1c1797d..995e3bd 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -43,6 +43,7 @@
 #include <linux/kernel.h>
 
 #include <linux/uaccess.h>
+#include <linux/export.h>
 
 /*
  * locking rule: all changes to constraints or notifiers lists
@@ -69,6 +70,7 @@
 };
 static struct pm_qos_object cpu_dma_pm_qos = {
 	.constraints = &cpu_dma_constraints,
+	.name = "cpu_dma_latency",
 };
 
 static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
@@ -386,8 +388,7 @@
 		pm_qos_add_request(req, pm_qos_class, PM_QOS_DEFAULT_VALUE);
 		filp->private_data = req;
 
-		if (filp->private_data)
-			return 0;
+		return 0;
 	}
 	return -EPERM;
 }
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index fdd4263..4953dc0 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/kmod.h>
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/syscalls.h>
@@ -21,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <trace/events/power.h>
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 42ddbc6..6d8f535 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -12,6 +12,7 @@
 #include <linux/suspend.h>
 #include <linux/syscalls.h>
 #include <linux/reboot.h>
+#include <linux/kmod.h>
 #include <linux/string.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/kernel/profile.c b/kernel/profile.c
index 961b389..76b8e77 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -13,7 +13,7 @@
  *	to resolve timer interrupt livelocks, William Irwin, Oracle, 2004
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/profile.h>
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index a70d2a5..24d0447 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -8,7 +8,7 @@
  */
 
 #include <linux/capability.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
diff --git a/kernel/range.c b/kernel/range.c
index 37fa9b9..9b8ae2d 100644
--- a/kernel/range.c
+++ b/kernel/range.c
@@ -1,7 +1,7 @@
 /*
  * Range add and subtract
  */
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sort.h>
 
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index ca0d23b..c5b98e5 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -43,7 +43,7 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/mutex.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/hardirq.h>
 
 #define CREATE_TRACE_POINTS
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index da775c8..636af6d 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -22,13 +22,12 @@
  * For detailed explanation of Read-Copy Update mechanism see -
  *		Documentation/RCU
  */
-#include <linux/moduleparam.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 #include <linux/rcupdate.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
 #include <linux/types.h>
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index 02aa713..2b0484a 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -23,6 +23,7 @@
  */
 
 #include <linux/kthread.h>
+#include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index e234eb9..6b76d81 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -38,7 +38,7 @@
 #include <linux/nmi.h>
 #include <linux/atomic.h>
 #include <linux/bitops.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/completion.h>
 #include <linux/moduleparam.h>
 #include <linux/percpu.h>
diff --git a/kernel/relay.c b/kernel/relay.c
index 859ea5a..226fade 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -15,7 +15,7 @@
 #include <linux/errno.h>
 #include <linux/stddef.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/relay.h>
 #include <linux/vmalloc.h>
diff --git a/kernel/resource.c b/kernel/resource.c
index c8dc249..7640b3a 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -7,7 +7,7 @@
  * Arbitrary resource management.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
diff --git a/kernel/rtmutex-debug.c b/kernel/rtmutex-debug.c
index a2e7e72..8eafd1b 100644
--- a/kernel/rtmutex-debug.c
+++ b/kernel/rtmutex-debug.c
@@ -18,7 +18,7 @@
  */
 #include <linux/sched.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/kallsyms.h>
 #include <linux/syscalls.h>
diff --git a/kernel/rtmutex-tester.c b/kernel/rtmutex-tester.c
index 5c9ccd3..3d9f31c 100644
--- a/kernel/rtmutex-tester.c
+++ b/kernel/rtmutex-tester.c
@@ -7,7 +7,7 @@
  *
  */
 #include <linux/kthread.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/sysdev.h>
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 5e8d9cc..f9d8482 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -11,7 +11,7 @@
  *  See Documentation/rt-mutex-design.txt for details.
  */
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
 
diff --git a/kernel/rwsem.c b/kernel/rwsem.c
index 9f48f3d..b152f74 100644
--- a/kernel/rwsem.c
+++ b/kernel/rwsem.c
@@ -7,7 +7,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/rwsem.h>
 
 #include <asm/system.h>
diff --git a/kernel/sched.c b/kernel/sched.c
index d87c6e5..0e9344a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7087,8 +7087,6 @@
 
 __setup("isolcpus=", isolated_cpu_setup);
 
-#define SD_NODES_PER_DOMAIN 16
-
 #ifdef CONFIG_NUMA
 
 /**
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 9d8af0b..c685e31 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -62,7 +62,7 @@
  */
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/percpu.h>
 #include <linux/ktime.h>
 #include <linux/sched.h>
diff --git a/kernel/semaphore.c b/kernel/semaphore.c
index d831841..60636a4 100644
--- a/kernel/semaphore.c
+++ b/kernel/semaphore.c
@@ -27,7 +27,7 @@
 
 #include <linux/compiler.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/spinlock.h>
diff --git a/kernel/signal.c b/kernel/signal.c
index d252be2..b3f78d09 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -11,7 +11,7 @@
  */
 
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/fs.h>
diff --git a/kernel/smp.c b/kernel/smp.c
index fb67dfa..db197d6 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -6,7 +6,7 @@
 #include <linux/rcupdate.h>
 #include <linux/rculist.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <linux/gfp.h>
diff --git a/kernel/softirq.c b/kernel/softirq.c
index fca82c3..2c71d91 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -10,7 +10,7 @@
  *	Remote softirq infrastructure is by Jens Axboe.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index be6517f..84c7d96 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -19,7 +19,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/debug_locks.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 /*
  * If lockdep is enabled then we use the non-preemption spin-ops
diff --git a/kernel/srcu.c b/kernel/srcu.c
index 73ce23f..0febf61 100644
--- a/kernel/srcu.c
+++ b/kernel/srcu.c
@@ -24,7 +24,7 @@
  *
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/percpu.h>
 #include <linux/preempt.h>
diff --git a/kernel/stacktrace.c b/kernel/stacktrace.c
index d20c698..00fe55c 100644
--- a/kernel/stacktrace.c
+++ b/kernel/stacktrace.c
@@ -7,7 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kallsyms.h>
 #include <linux/stacktrace.h>
 
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 5b0951aa0..2f194e9 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -12,7 +12,7 @@
 #include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/kthread.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/percpu.h>
 #include <linux/sched.h>
 #include <linux/stop_machine.h>
diff --git a/kernel/sys.c b/kernel/sys.c
index d06c091..481611f 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -4,7 +4,7 @@
  *  Copyright (C) 1991, 1992  Linus Torvalds
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/mman.h>
@@ -12,6 +12,7 @@
 #include <linux/prctl.h>
 #include <linux/highuid.h>
 #include <linux/fs.h>
+#include <linux/kmod.h>
 #include <linux/perf_event.h>
 #include <linux/resource.h>
 #include <linux/kernel.h>
diff --git a/kernel/time.c b/kernel/time.c
index d776062..73e416d 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -27,7 +27,7 @@
  *	with nanosecond accuracy
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/timex.h>
 #include <linux/capability.h>
 #include <linux/clocksource.h>
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index cf52fda..cfc65e1 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -492,6 +492,22 @@
 }
 
 /**
+ * clocksource_max_adjustment- Returns max adjustment amount
+ * @cs:         Pointer to clocksource
+ *
+ */
+static u32 clocksource_max_adjustment(struct clocksource *cs)
+{
+	u64 ret;
+	/*
+	 * We won't try to correct for more then 11% adjustments (110,000 ppm),
+	 */
+	ret = (u64)cs->mult * 11;
+	do_div(ret,100);
+	return (u32)ret;
+}
+
+/**
  * clocksource_max_deferment - Returns max time the clocksource can be deferred
  * @cs:         Pointer to clocksource
  *
@@ -503,25 +519,28 @@
 	/*
 	 * Calculate the maximum number of cycles that we can pass to the
 	 * cyc2ns function without overflowing a 64-bit signed result. The
-	 * maximum number of cycles is equal to ULLONG_MAX/cs->mult which
-	 * is equivalent to the below.
-	 * max_cycles < (2^63)/cs->mult
-	 * max_cycles < 2^(log2((2^63)/cs->mult))
-	 * max_cycles < 2^(log2(2^63) - log2(cs->mult))
-	 * max_cycles < 2^(63 - log2(cs->mult))
-	 * max_cycles < 1 << (63 - log2(cs->mult))
+	 * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
+	 * which is equivalent to the below.
+	 * max_cycles < (2^63)/(cs->mult + cs->maxadj)
+	 * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
+	 * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
+	 * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
+	 * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
 	 * Please note that we add 1 to the result of the log2 to account for
 	 * any rounding errors, ensure the above inequality is satisfied and
 	 * no overflow will occur.
 	 */
-	max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
+	max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
 
 	/*
 	 * The actual maximum number of cycles we can defer the clocksource is
 	 * determined by the minimum of max_cycles and cs->mask.
+	 * Note: Here we subtract the maxadj to make sure we don't sleep for
+	 * too long if there's a large negative adjustment.
 	 */
 	max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
-	max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
+	max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
+					cs->shift);
 
 	/*
 	 * To ensure that the clocksource does not wrap whilst we are idle,
@@ -640,7 +659,6 @@
 void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
 	u64 sec;
-
 	/*
 	 * Calc the maximum number of seconds which we can run before
 	 * wrapping around. For clocksources which have a mask > 32bit
@@ -661,6 +679,20 @@
 
 	clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
 			       NSEC_PER_SEC / scale, sec * scale);
+
+	/*
+	 * for clocksources that have large mults, to avoid overflow.
+	 * Since mult may be adjusted by ntp, add an safety extra margin
+	 *
+	 */
+	cs->maxadj = clocksource_max_adjustment(cs);
+	while ((cs->mult + cs->maxadj < cs->mult)
+		|| (cs->mult - cs->maxadj > cs->mult)) {
+		cs->mult >>= 1;
+		cs->shift--;
+		cs->maxadj = clocksource_max_adjustment(cs);
+	}
+
 	cs->max_idle_ns = clocksource_max_deferment(cs);
 }
 EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@@ -701,6 +733,12 @@
  */
 int clocksource_register(struct clocksource *cs)
 {
+	/* calculate max adjustment for given mult/shift */
+	cs->maxadj = clocksource_max_adjustment(cs);
+	WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
+		"Clocksource %s might overflow on 11%% adjustment\n",
+		cs->name);
+
 	/* calculate max idle time permitted for this clocksource */
 	cs->max_idle_ns = clocksource_max_deferment(cs);
 
diff --git a/kernel/time/posix-clock.c b/kernel/time/posix-clock.c
index c340ca6..ce033c7 100644
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -18,6 +18,7 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/file.h>
 #include <linux/posix-clock.h>
 #include <linux/slab.h>
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 2b021b0e..2378413 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -249,6 +249,8 @@
 		secs = xtime.tv_sec + wall_to_monotonic.tv_sec;
 		nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec;
 		nsecs += timekeeping_get_ns();
+		/* If arch requires, add in gettimeoffset() */
+		nsecs += arch_gettimeoffset();
 
 	} while (read_seqretry(&xtime_lock, seq));
 	/*
@@ -280,6 +282,8 @@
 		*ts = xtime;
 		tomono = wall_to_monotonic;
 		nsecs = timekeeping_get_ns();
+		/* If arch requires, add in gettimeoffset() */
+		nsecs += arch_gettimeoffset();
 
 	} while (read_seqretry(&xtime_lock, seq));
 
@@ -802,14 +806,44 @@
 	s64 error, interval = timekeeper.cycle_interval;
 	int adj;
 
+	/*
+	 * The point of this is to check if the error is greater then half
+	 * an interval.
+	 *
+	 * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs.
+	 *
+	 * Note we subtract one in the shift, so that error is really error*2.
+	 * This "saves" dividing(shifting) intererval twice, but keeps the
+	 * (error > interval) comparision as still measuring if error is
+	 * larger then half an interval.
+	 *
+	 * Note: It does not "save" on aggrivation when reading the code.
+	 */
 	error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1);
 	if (error > interval) {
+		/*
+		 * We now divide error by 4(via shift), which checks if
+		 * the error is greater then twice the interval.
+		 * If it is greater, we need a bigadjust, if its smaller,
+		 * we can adjust by 1.
+		 */
 		error >>= 2;
+		/*
+		 * XXX - In update_wall_time, we round up to the next
+		 * nanosecond, and store the amount rounded up into
+		 * the error. This causes the likely below to be unlikely.
+		 *
+		 * The properfix is to avoid rounding up by using
+		 * the high precision timekeeper.xtime_nsec instead of
+		 * xtime.tv_nsec everywhere. Fixing this will take some
+		 * time.
+		 */
 		if (likely(error <= interval))
 			adj = 1;
 		else
 			adj = timekeeping_bigadjust(error, &interval, &offset);
 	} else if (error < -interval) {
+		/* See comment above, this is just switched for the negative */
 		error >>= 2;
 		if (likely(error >= -interval)) {
 			adj = -1;
@@ -817,9 +851,65 @@
 			offset = -offset;
 		} else
 			adj = timekeeping_bigadjust(error, &interval, &offset);
-	} else
+	} else /* No adjustment needed */
 		return;
 
+	WARN_ONCE(timekeeper.clock->maxadj &&
+			(timekeeper.mult + adj > timekeeper.clock->mult +
+						timekeeper.clock->maxadj),
+			"Adjusting %s more then 11%% (%ld vs %ld)\n",
+			timekeeper.clock->name, (long)timekeeper.mult + adj,
+			(long)timekeeper.clock->mult +
+				timekeeper.clock->maxadj);
+	/*
+	 * So the following can be confusing.
+	 *
+	 * To keep things simple, lets assume adj == 1 for now.
+	 *
+	 * When adj != 1, remember that the interval and offset values
+	 * have been appropriately scaled so the math is the same.
+	 *
+	 * The basic idea here is that we're increasing the multiplier
+	 * by one, this causes the xtime_interval to be incremented by
+	 * one cycle_interval. This is because:
+	 *	xtime_interval = cycle_interval * mult
+	 * So if mult is being incremented by one:
+	 *	xtime_interval = cycle_interval * (mult + 1)
+	 * Its the same as:
+	 *	xtime_interval = (cycle_interval * mult) + cycle_interval
+	 * Which can be shortened to:
+	 *	xtime_interval += cycle_interval
+	 *
+	 * So offset stores the non-accumulated cycles. Thus the current
+	 * time (in shifted nanoseconds) is:
+	 *	now = (offset * adj) + xtime_nsec
+	 * Now, even though we're adjusting the clock frequency, we have
+	 * to keep time consistent. In other words, we can't jump back
+	 * in time, and we also want to avoid jumping forward in time.
+	 *
+	 * So given the same offset value, we need the time to be the same
+	 * both before and after the freq adjustment.
+	 *	now = (offset * adj_1) + xtime_nsec_1
+	 *	now = (offset * adj_2) + xtime_nsec_2
+	 * So:
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * adj_2) + xtime_nsec_2
+	 * And we know:
+	 *	adj_2 = adj_1 + 1
+	 * So:
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * (adj_1+1)) + xtime_nsec_2
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * adj_1) + offset + xtime_nsec_2
+	 * Canceling the sides:
+	 *	xtime_nsec_1 = offset + xtime_nsec_2
+	 * Which gives us:
+	 *	xtime_nsec_2 = xtime_nsec_1 - offset
+	 * Which simplfies to:
+	 *	xtime_nsec -= offset
+	 *
+	 * XXX - TODO: Doc ntp_error calculation.
+	 */
 	timekeeper.mult += adj;
 	timekeeper.xtime_interval += interval;
 	timekeeper.xtime_nsec -= offset;
diff --git a/kernel/timer.c b/kernel/timer.c
index 8cff361..dbaa624 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -20,7 +20,7 @@
  */
 
 #include <linux/kernel_stat.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <linux/init.h>
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 7c910a5..16fc34a 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -23,6 +23,7 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/debugfs.h>
+#include <linux/export.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 077d853..900b409 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -22,6 +22,7 @@
 #include <linux/hardirq.h>
 #include <linux/kthread.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 #include <linux/ftrace.h>
 #include <linux/sysctl.h>
 #include <linux/slab.h>
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index ee7b5a0..cb65454 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -2,6 +2,7 @@
 #include <trace/events/syscalls.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>	/* for MODULE_NAME_LEN via KSYM_SYMBOL_LEN */
 #include <linux/ftrace.h>
 #include <linux/perf_event.h>
 #include <asm/syscall.h>
diff --git a/kernel/up.c b/kernel/up.c
index 1ff27a2..c54c75e 100644
--- a/kernel/up.c
+++ b/kernel/up.c
@@ -4,7 +4,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/smp.h>
 
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
diff --git a/kernel/user-return-notifier.c b/kernel/user-return-notifier.c
index 92cb706..1744bb8 100644
--- a/kernel/user-return-notifier.c
+++ b/kernel/user-return-notifier.c
@@ -2,7 +2,7 @@
 #include <linux/user-return-notifier.h>
 #include <linux/percpu.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 
 static DEFINE_PER_CPU(struct hlist_head, return_notifier_list);
 
diff --git a/kernel/user.c b/kernel/user.c
index 9e03e9c..71dd236 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -14,7 +14,7 @@
 #include <linux/bitops.h>
 #include <linux/key.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/user_namespace.h>
 
 /*
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 9da289c..3b906e9 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -5,7 +5,7 @@
  *  License.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/user_namespace.h>
diff --git a/kernel/utsname.c b/kernel/utsname.c
index bff131b..405caf9 100644
--- a/kernel/utsname.c
+++ b/kernel/utsname.c
@@ -9,7 +9,7 @@
  *  License.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
 #include <linux/err.h>
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index 3b0d48e..63da38c 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -9,7 +9,7 @@
  *  License.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
 #include <linux/sysctl.h>
diff --git a/kernel/wait.c b/kernel/wait.c
index f45ea8d..26fa779 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -4,7 +4,7 @@
  * (C) 2004 William Irwin, Oracle
  */
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/wait.h>
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 1783aab..42fa9ad 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -23,7 +23,7 @@
  * Please read Documentation/workqueue.txt for details.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/init.h>
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 79700fa..74c6c7f 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -24,6 +24,7 @@
 #include <linux/spinlock.h>
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
+#include <linux/export.h>
 #include <linux/device.h>
 #include <linux/types.h>
 #include <linux/sched.h>
diff --git a/lib/nlattr.c b/lib/nlattr.c
index ac09f22..a8408b6 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -20,6 +20,7 @@
 	[NLA_U16]	= sizeof(u16),
 	[NLA_U32]	= sizeof(u32),
 	[NLA_U64]	= sizeof(u64),
+	[NLA_MSECS]	= sizeof(u64),
 	[NLA_NESTED]	= NLA_HDRLEN,
 };
 
diff --git a/lib/raid6/algos.c b/lib/raid6/algos.c
index b595f56..8b02f60 100644
--- a/lib/raid6/algos.c
+++ b/lib/raid6/algos.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/raid/pq.h>
+#include <linux/module.h>
 #ifndef __KERNEL__
 #include <sys/mman.h>
 #include <stdio.h>
diff --git a/lib/raid6/mktables.c b/lib/raid6/mktables.c
index 3b15008..8a37809 100644
--- a/lib/raid6/mktables.c
+++ b/lib/raid6/mktables.c
@@ -60,6 +60,7 @@
 	uint8_t exptbl[256], invtbl[256];
 
 	printf("#include <linux/raid/pq.h>\n");
+	printf("#include <linux/export.h>\n");
 
 	/* Compute multiplication table */
 	printf("\nconst u8  __attribute__((aligned(256)))\n"
diff --git a/lib/raid6/recov.c b/lib/raid6/recov.c
index 8590d19..fe275d7 100644
--- a/lib/raid6/recov.c
+++ b/lib/raid6/recov.c
@@ -18,6 +18,7 @@
  * the syndrome.)
  */
 
+#include <linux/export.h>
 #include <linux/raid/pq.h>
 
 /* Recover two failed data blocks. */
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 7520ef0..71034f4 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -97,6 +97,7 @@
 		   "BdiDirtyThresh:     %10lu kB\n"
 		   "DirtyThresh:        %10lu kB\n"
 		   "BackgroundThresh:   %10lu kB\n"
+		   "BdiDirtied:         %10lu kB\n"
 		   "BdiWritten:         %10lu kB\n"
 		   "BdiWriteBandwidth:  %10lu kBps\n"
 		   "b_dirty:            %10lu\n"
@@ -109,6 +110,7 @@
 		   K(bdi_thresh),
 		   K(dirty_thresh),
 		   K(background_thresh),
+		   (unsigned long) K(bdi_stat(bdi, BDI_DIRTIED)),
 		   (unsigned long) K(bdi_stat(bdi, BDI_WRITTEN)),
 		   (unsigned long) K(bdi->write_bandwidth),
 		   nr_dirty,
@@ -473,7 +475,8 @@
 				 * the bdi from the thread. Hopefully 1024 is
 				 * large enough for efficient IO.
 				 */
-				writeback_inodes_wb(&bdi->wb, 1024);
+				writeback_inodes_wb(&bdi->wb, 1024,
+						    WB_REASON_FORKER_THREAD);
 			} else {
 				/*
 				 * The spinlock makes sure we do not lose
@@ -683,6 +686,8 @@
 	bdi->bw_time_stamp = jiffies;
 	bdi->written_stamp = 0;
 
+	bdi->balanced_dirty_ratelimit = INIT_BW;
+	bdi->dirty_ratelimit = INIT_BW;
 	bdi->write_bandwidth = INIT_BW;
 	bdi->avg_write_bandwidth = INIT_BW;
 
@@ -719,6 +724,14 @@
 
 	bdi_unregister(bdi);
 
+	/*
+	 * If bdi_unregister() had already been called earlier, the
+	 * wakeup_timer could still be armed because bdi_prune_sb()
+	 * can race with the bdi_wakeup_thread_delayed() calls from
+	 * __mark_inode_dirty().
+	 */
+	del_timer_sync(&bdi->wb.wakeup_timer);
+
 	for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
 		percpu_counter_destroy(&bdi->bdi_stat[i]);
 
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 01d5a4b3..1a77012 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -12,7 +12,7 @@
 #include <linux/pfn.h>
 #include <linux/slab.h>
 #include <linux/bootmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kmemleak.h>
 #include <linux/range.h>
 #include <linux/memblock.h>
diff --git a/mm/bounce.c b/mm/bounce.c
index 1481de6..4e9ae72 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -4,7 +4,7 @@
  */
 
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/swap.h>
 #include <linux/gfp.h>
 #include <linux/bio.h>
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
+#include <linux/bootmem.h>
 #include <asm/tlbflush.h>
 
 #include <trace/events/block.h>
@@ -26,12 +27,10 @@
 #ifdef CONFIG_HIGHMEM
 static __init int init_emergency_pool(void)
 {
-	struct sysinfo i;
-	si_meminfo(&i);
-	si_swapinfo(&i);
-
-	if (!i.totalhigh)
+#ifndef CONFIG_MEMORY_HOTPLUG
+	if (max_pfn <= max_low_pfn)
 		return 0;
+#endif
 
 	page_pool = mempool_create_page_pool(POOL_SIZE, 0);
 	BUG_ON(!page_pool);
diff --git a/mm/dmapool.c b/mm/dmapool.c
index fbb58e3..c5ab33b 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -27,11 +27,12 @@
 #include <linux/dmapool.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/poison.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/types.h>
diff --git a/mm/filemap.c b/mm/filemap.c
index 5cf820a..c0018f2 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -9,7 +9,7 @@
  * most "normal" filesystems (but you don't /have/ to use this:
  * the NFS filesystem used to do this differently, for example)
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/compiler.h>
 #include <linux/fs.h>
 #include <linux/uaccess.h>
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 93356cd..f91b2f6 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -10,7 +10,7 @@
 
 #include <linux/fs.h>
 #include <linux/pagemap.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/uio.h>
 #include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
diff --git a/mm/fremap.c b/mm/fremap.c
index b8e0e2d..9ed4fd4 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -13,7 +13,6 @@
 #include <linux/pagemap.h>
 #include <linux/swapops.h>
 #include <linux/rmap.h>
-#include <linux/module.h>
 #include <linux/syscalls.h>
 #include <linux/mmu_notifier.h>
 
diff --git a/mm/highmem.c b/mm/highmem.c
index e159a7b..57d82c6 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -17,7 +17,7 @@
  */
 
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/swap.h>
 #include <linux/bio.h>
 #include <linux/pagemap.h>
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index dae27ba..bb28a5f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2422,6 +2422,8 @@
 	 * anon_vma prepared.
 	 */
 	if (unlikely(anon_vma_prepare(vma))) {
+		page_cache_release(new_page);
+		page_cache_release(old_page);
 		/* Caller expects lock to be held */
 		spin_lock(&mm->page_table_lock);
 		return VM_FAULT_OOM;
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index d6880f5..f3b2a00 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -69,7 +69,7 @@
 #include <linux/sched.h>
 #include <linux/jiffies.h>
 #include <linux/delay.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kthread.h>
 #include <linux/prio_tree.h>
 #include <linux/fs.h>
diff --git a/mm/maccess.c b/mm/maccess.c
index 4cee182..d53adf9 100644
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -1,7 +1,7 @@
 /*
  * Access kernel memory without faulting.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 7af1d5e..6aff93c 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -33,6 +33,7 @@
 #include <linux/bit_spinlock.h>
 #include <linux/rcupdate.h>
 #include <linux/limits.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/rbtree.h>
 #include <linux/slab.h>
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index edc388d..06d3479 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -42,6 +42,7 @@
 #include <linux/sched.h>
 #include <linux/ksm.h>
 #include <linux/rmap.h>
+#include <linux/export.h>
 #include <linux/pagemap.h>
 #include <linux/swap.h>
 #include <linux/backing-dev.h>
diff --git a/mm/memory.c b/mm/memory.c
index b2b8731..829d437 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -47,7 +47,7 @@
 #include <linux/pagemap.h>
 #include <linux/ksm.h>
 #include <linux/rmap.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/delayacct.h>
 #include <linux/init.h>
 #include <linux/writeback.h>
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 6e7d8b2..2168489 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -11,7 +11,7 @@
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pagevec.h>
 #include <linux/writeback.h>
 #include <linux/slab.h>
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index cd237f4..adc3954 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -75,7 +75,7 @@
 #include <linux/cpuset.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/nsproxy.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
diff --git a/mm/mempool.c b/mm/mempool.c
index 1a3bc3d..e73641b 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -10,7 +10,7 @@
 
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mempool.h>
 #include <linux/blkdev.h>
 #include <linux/writeback.h>
diff --git a/mm/migrate.c b/mm/migrate.c
index 33358f8..578e291 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/migrate.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/swap.h>
 #include <linux/swapops.h>
 #include <linux/pagemap.h>
diff --git a/mm/mlock.c b/mm/mlock.c
index bd34b3a..4f4f53b 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -14,7 +14,7 @@
 #include <linux/mempolicy.h>
 #include <linux/syscalls.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/rmap.h>
 #include <linux/mmzone.h>
 #include <linux/hugetlb.h>
diff --git a/mm/mm_init.c b/mm/mm_init.c
index 4e0e265..1ffd97a 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -8,7 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/kobject.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include "internal.h"
 
 #ifdef CONFIG_DEBUG_MEMORY_INIT
diff --git a/mm/mmap.c b/mm/mmap.c
index 3c0061f..eae90af 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -22,7 +22,7 @@
 #include <linux/security.h>
 #include <linux/hugetlb.h>
 #include <linux/profile.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mount.h>
 #include <linux/mempolicy.h>
 #include <linux/rmap.h>
diff --git a/mm/mmu_context.c b/mm/mmu_context.c
index 9e82e93..cf332bc 100644
--- a/mm/mmu_context.c
+++ b/mm/mmu_context.c
@@ -5,7 +5,7 @@
 
 #include <linux/mm.h>
 #include <linux/mmu_context.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 
 #include <asm/mmu_context.h>
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index 8d032de..9a611d3 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -11,7 +11,7 @@
 
 #include <linux/rculist.h>
 #include <linux/mmu_notifier.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/rcupdate.h>
diff --git a/mm/mmzone.c b/mm/mmzone.c
index f5b7d17..7cf7b7d 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -8,7 +8,6 @@
 #include <linux/stddef.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <linux/module.h>
 
 struct pglist_data *first_online_pgdat(void)
 {
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 6e93dc7..7fa41b4 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -12,7 +12,7 @@
 #include <linux/pfn.h>
 #include <linux/slab.h>
 #include <linux/bootmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kmemleak.h>
 #include <linux/range.h>
 #include <linux/memblock.h>
diff --git a/mm/nommu.c b/mm/nommu.c
index 4358032..b982290 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -13,7 +13,7 @@
  *  Copyright (c) 2007-2010 Paul Mundt <lethal@linux-sh.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/swap.h>
@@ -454,7 +454,7 @@
  *	between processes, it syncs the pagetable across all
  *	processes.
  */
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
 {
 	BUG();
 	return NULL;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index e916168..76f2c5a 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -26,7 +26,7 @@
 #include <linux/timex.h>
 #include <linux/jiffies.h>
 #include <linux/cpuset.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/notifier.h>
 #include <linux/memcontrol.h>
 #include <linux/mempolicy.h>
@@ -185,6 +185,11 @@
 	if (!p)
 		return 0;
 
+	if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+		task_unlock(p);
+		return 0;
+	}
+
 	/*
 	 * The memory controller may have a limit of 0 bytes, so avoid a divide
 	 * by zero, if necessary.
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 793e987..7125248 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -12,7 +12,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
@@ -46,26 +46,14 @@
  */
 #define BANDWIDTH_INTERVAL	max(HZ/5, 1)
 
+#define RATELIMIT_CALC_SHIFT	10
+
 /*
  * After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
  * will look to see if it needs to force writeback or throttling.
  */
 static long ratelimit_pages = 32;
 
-/*
- * When balance_dirty_pages decides that the caller needs to perform some
- * non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than dirtied pages to ensure that reasonably
- * large amounts of I/O are submitted.
- */
-static inline long sync_writeback_pages(unsigned long dirtied)
-{
-	if (dirtied < ratelimit_pages)
-		dirtied = ratelimit_pages;
-
-	return dirtied + dirtied / 2;
-}
-
 /* The following parameters are exported via /proc/sys/vm */
 
 /*
@@ -140,7 +128,6 @@
  *
  */
 static struct prop_descriptor vm_completions;
-static struct prop_descriptor vm_dirties;
 
 /*
  * couple the period to the dirty_ratio:
@@ -166,7 +153,8 @@
 {
 	int shift = calc_period_shift();
 	prop_change_shift(&vm_completions, shift);
-	prop_change_shift(&vm_dirties, shift);
+
+	writeback_set_ratelimit();
 }
 
 int dirty_background_ratio_handler(struct ctl_table *table, int write,
@@ -245,11 +233,6 @@
 }
 EXPORT_SYMBOL_GPL(bdi_writeout_inc);
 
-void task_dirty_inc(struct task_struct *tsk)
-{
-	prop_inc_single(&vm_dirties, &tsk->dirties);
-}
-
 /*
  * Obtain an accurate fraction of the BDI's portion.
  */
@@ -260,50 +243,6 @@
 				numerator, denominator);
 }
 
-static inline void task_dirties_fraction(struct task_struct *tsk,
-		long *numerator, long *denominator)
-{
-	prop_fraction_single(&vm_dirties, &tsk->dirties,
-				numerator, denominator);
-}
-
-/*
- * task_dirty_limit - scale down dirty throttling threshold for one task
- *
- * task specific dirty limit:
- *
- *   dirty -= (dirty/8) * p_{t}
- *
- * To protect light/slow dirtying tasks from heavier/fast ones, we start
- * throttling individual tasks before reaching the bdi dirty limit.
- * Relatively low thresholds will be allocated to heavy dirtiers. So when
- * dirty pages grow large, heavy dirtiers will be throttled first, which will
- * effectively curb the growth of dirty pages. Light dirtiers with high enough
- * dirty threshold may never get throttled.
- */
-#define TASK_LIMIT_FRACTION 8
-static unsigned long task_dirty_limit(struct task_struct *tsk,
-				       unsigned long bdi_dirty)
-{
-	long numerator, denominator;
-	unsigned long dirty = bdi_dirty;
-	u64 inv = dirty / TASK_LIMIT_FRACTION;
-
-	task_dirties_fraction(tsk, &numerator, &denominator);
-	inv *= numerator;
-	do_div(inv, denominator);
-
-	dirty -= inv;
-
-	return max(dirty, bdi_dirty/2);
-}
-
-/* Minimum limit for any task */
-static unsigned long task_min_dirty_limit(unsigned long bdi_dirty)
-{
-	return bdi_dirty - bdi_dirty / TASK_LIMIT_FRACTION;
-}
-
 /*
  * bdi_min_ratio keeps the sum of the minimum dirty shares of all
  * registered backing devices, which, for obvious reasons, can not
@@ -413,6 +352,12 @@
 	return x + 1;	/* Ensure that we never return 0 */
 }
 
+static unsigned long dirty_freerun_ceiling(unsigned long thresh,
+					   unsigned long bg_thresh)
+{
+	return (thresh + bg_thresh) / 2;
+}
+
 static unsigned long hard_dirty_limit(unsigned long thresh)
 {
 	return max(thresh, global_dirty_limit);
@@ -497,6 +442,198 @@
 	return bdi_dirty;
 }
 
+/*
+ * Dirty position control.
+ *
+ * (o) global/bdi setpoints
+ *
+ * We want the dirty pages be balanced around the global/bdi setpoints.
+ * When the number of dirty pages is higher/lower than the setpoint, the
+ * dirty position control ratio (and hence task dirty ratelimit) will be
+ * decreased/increased to bring the dirty pages back to the setpoint.
+ *
+ *     pos_ratio = 1 << RATELIMIT_CALC_SHIFT
+ *
+ *     if (dirty < setpoint) scale up   pos_ratio
+ *     if (dirty > setpoint) scale down pos_ratio
+ *
+ *     if (bdi_dirty < bdi_setpoint) scale up   pos_ratio
+ *     if (bdi_dirty > bdi_setpoint) scale down pos_ratio
+ *
+ *     task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
+ *
+ * (o) global control line
+ *
+ *     ^ pos_ratio
+ *     |
+ *     |            |<===== global dirty control scope ======>|
+ * 2.0 .............*
+ *     |            .*
+ *     |            . *
+ *     |            .   *
+ *     |            .     *
+ *     |            .        *
+ *     |            .            *
+ * 1.0 ................................*
+ *     |            .                  .     *
+ *     |            .                  .          *
+ *     |            .                  .              *
+ *     |            .                  .                 *
+ *     |            .                  .                    *
+ *   0 +------------.------------------.----------------------*------------->
+ *           freerun^          setpoint^                 limit^   dirty pages
+ *
+ * (o) bdi control line
+ *
+ *     ^ pos_ratio
+ *     |
+ *     |            *
+ *     |              *
+ *     |                *
+ *     |                  *
+ *     |                    * |<=========== span ============>|
+ * 1.0 .......................*
+ *     |                      . *
+ *     |                      .   *
+ *     |                      .     *
+ *     |                      .       *
+ *     |                      .         *
+ *     |                      .           *
+ *     |                      .             *
+ *     |                      .               *
+ *     |                      .                 *
+ *     |                      .                   *
+ *     |                      .                     *
+ * 1/4 ...............................................* * * * * * * * * * * *
+ *     |                      .                         .
+ *     |                      .                           .
+ *     |                      .                             .
+ *   0 +----------------------.-------------------------------.------------->
+ *                bdi_setpoint^                    x_intercept^
+ *
+ * The bdi control line won't drop below pos_ratio=1/4, so that bdi_dirty can
+ * be smoothly throttled down to normal if it starts high in situations like
+ * - start writing to a slow SD card and a fast disk at the same time. The SD
+ *   card's bdi_dirty may rush to many times higher than bdi_setpoint.
+ * - the bdi dirty thresh drops quickly due to change of JBOD workload
+ */
+static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
+					unsigned long thresh,
+					unsigned long bg_thresh,
+					unsigned long dirty,
+					unsigned long bdi_thresh,
+					unsigned long bdi_dirty)
+{
+	unsigned long write_bw = bdi->avg_write_bandwidth;
+	unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
+	unsigned long limit = hard_dirty_limit(thresh);
+	unsigned long x_intercept;
+	unsigned long setpoint;		/* dirty pages' target balance point */
+	unsigned long bdi_setpoint;
+	unsigned long span;
+	long long pos_ratio;		/* for scaling up/down the rate limit */
+	long x;
+
+	if (unlikely(dirty >= limit))
+		return 0;
+
+	/*
+	 * global setpoint
+	 *
+	 *                           setpoint - dirty 3
+	 *        f(dirty) := 1.0 + (----------------)
+	 *                           limit - setpoint
+	 *
+	 * it's a 3rd order polynomial that subjects to
+	 *
+	 * (1) f(freerun)  = 2.0 => rampup dirty_ratelimit reasonably fast
+	 * (2) f(setpoint) = 1.0 => the balance point
+	 * (3) f(limit)    = 0   => the hard limit
+	 * (4) df/dx      <= 0	 => negative feedback control
+	 * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
+	 *     => fast response on large errors; small oscillation near setpoint
+	 */
+	setpoint = (freerun + limit) / 2;
+	x = div_s64((setpoint - dirty) << RATELIMIT_CALC_SHIFT,
+		    limit - setpoint + 1);
+	pos_ratio = x;
+	pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+	pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+	pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+
+	/*
+	 * We have computed basic pos_ratio above based on global situation. If
+	 * the bdi is over/under its share of dirty pages, we want to scale
+	 * pos_ratio further down/up. That is done by the following mechanism.
+	 */
+
+	/*
+	 * bdi setpoint
+	 *
+	 *        f(bdi_dirty) := 1.0 + k * (bdi_dirty - bdi_setpoint)
+	 *
+	 *                        x_intercept - bdi_dirty
+	 *                     := --------------------------
+	 *                        x_intercept - bdi_setpoint
+	 *
+	 * The main bdi control line is a linear function that subjects to
+	 *
+	 * (1) f(bdi_setpoint) = 1.0
+	 * (2) k = - 1 / (8 * write_bw)  (in single bdi case)
+	 *     or equally: x_intercept = bdi_setpoint + 8 * write_bw
+	 *
+	 * For single bdi case, the dirty pages are observed to fluctuate
+	 * regularly within range
+	 *        [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2]
+	 * for various filesystems, where (2) can yield in a reasonable 12.5%
+	 * fluctuation range for pos_ratio.
+	 *
+	 * For JBOD case, bdi_thresh (not bdi_dirty!) could fluctuate up to its
+	 * own size, so move the slope over accordingly and choose a slope that
+	 * yields 100% pos_ratio fluctuation on suddenly doubled bdi_thresh.
+	 */
+	if (unlikely(bdi_thresh > thresh))
+		bdi_thresh = thresh;
+	bdi_thresh = max(bdi_thresh, (limit - dirty) / 8);
+	/*
+	 * scale global setpoint to bdi's:
+	 *	bdi_setpoint = setpoint * bdi_thresh / thresh
+	 */
+	x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+	bdi_setpoint = setpoint * (u64)x >> 16;
+	/*
+	 * Use span=(8*write_bw) in single bdi case as indicated by
+	 * (thresh - bdi_thresh ~= 0) and transit to bdi_thresh in JBOD case.
+	 *
+	 *        bdi_thresh                    thresh - bdi_thresh
+	 * span = ---------- * (8 * write_bw) + ------------------- * bdi_thresh
+	 *          thresh                            thresh
+	 */
+	span = (thresh - bdi_thresh + 8 * write_bw) * (u64)x >> 16;
+	x_intercept = bdi_setpoint + span;
+
+	if (bdi_dirty < x_intercept - span / 4) {
+		pos_ratio = div_u64(pos_ratio * (x_intercept - bdi_dirty),
+				    x_intercept - bdi_setpoint + 1);
+	} else
+		pos_ratio /= 4;
+
+	/*
+	 * bdi reserve area, safeguard against dirty pool underrun and disk idle
+	 * It may push the desired control point of global dirty pages higher
+	 * than setpoint.
+	 */
+	x_intercept = bdi_thresh / 2;
+	if (bdi_dirty < x_intercept) {
+		if (bdi_dirty > x_intercept / 8)
+			pos_ratio = div_u64(pos_ratio * x_intercept, bdi_dirty);
+		else
+			pos_ratio *= 8;
+	}
+
+	return pos_ratio;
+}
+
 static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
 				       unsigned long elapsed,
 				       unsigned long written)
@@ -593,8 +730,153 @@
 	spin_unlock(&dirty_lock);
 }
 
+/*
+ * Maintain bdi->dirty_ratelimit, the base dirty throttle rate.
+ *
+ * Normal bdi tasks will be curbed at or below it in long term.
+ * Obviously it should be around (write_bw / N) when there are N dd tasks.
+ */
+static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
+				       unsigned long thresh,
+				       unsigned long bg_thresh,
+				       unsigned long dirty,
+				       unsigned long bdi_thresh,
+				       unsigned long bdi_dirty,
+				       unsigned long dirtied,
+				       unsigned long elapsed)
+{
+	unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
+	unsigned long limit = hard_dirty_limit(thresh);
+	unsigned long setpoint = (freerun + limit) / 2;
+	unsigned long write_bw = bdi->avg_write_bandwidth;
+	unsigned long dirty_ratelimit = bdi->dirty_ratelimit;
+	unsigned long dirty_rate;
+	unsigned long task_ratelimit;
+	unsigned long balanced_dirty_ratelimit;
+	unsigned long pos_ratio;
+	unsigned long step;
+	unsigned long x;
+
+	/*
+	 * The dirty rate will match the writeout rate in long term, except
+	 * when dirty pages are truncated by userspace or re-dirtied by FS.
+	 */
+	dirty_rate = (dirtied - bdi->dirtied_stamp) * HZ / elapsed;
+
+	pos_ratio = bdi_position_ratio(bdi, thresh, bg_thresh, dirty,
+				       bdi_thresh, bdi_dirty);
+	/*
+	 * task_ratelimit reflects each dd's dirty rate for the past 200ms.
+	 */
+	task_ratelimit = (u64)dirty_ratelimit *
+					pos_ratio >> RATELIMIT_CALC_SHIFT;
+	task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
+
+	/*
+	 * A linear estimation of the "balanced" throttle rate. The theory is,
+	 * if there are N dd tasks, each throttled at task_ratelimit, the bdi's
+	 * dirty_rate will be measured to be (N * task_ratelimit). So the below
+	 * formula will yield the balanced rate limit (write_bw / N).
+	 *
+	 * Note that the expanded form is not a pure rate feedback:
+	 *	rate_(i+1) = rate_(i) * (write_bw / dirty_rate)		     (1)
+	 * but also takes pos_ratio into account:
+	 *	rate_(i+1) = rate_(i) * (write_bw / dirty_rate) * pos_ratio  (2)
+	 *
+	 * (1) is not realistic because pos_ratio also takes part in balancing
+	 * the dirty rate.  Consider the state
+	 *	pos_ratio = 0.5						     (3)
+	 *	rate = 2 * (write_bw / N)				     (4)
+	 * If (1) is used, it will stuck in that state! Because each dd will
+	 * be throttled at
+	 *	task_ratelimit = pos_ratio * rate = (write_bw / N)	     (5)
+	 * yielding
+	 *	dirty_rate = N * task_ratelimit = write_bw		     (6)
+	 * put (6) into (1) we get
+	 *	rate_(i+1) = rate_(i)					     (7)
+	 *
+	 * So we end up using (2) to always keep
+	 *	rate_(i+1) ~= (write_bw / N)				     (8)
+	 * regardless of the value of pos_ratio. As long as (8) is satisfied,
+	 * pos_ratio is able to drive itself to 1.0, which is not only where
+	 * the dirty count meet the setpoint, but also where the slope of
+	 * pos_ratio is most flat and hence task_ratelimit is least fluctuated.
+	 */
+	balanced_dirty_ratelimit = div_u64((u64)task_ratelimit * write_bw,
+					   dirty_rate | 1);
+
+	/*
+	 * We could safely do this and return immediately:
+	 *
+	 *	bdi->dirty_ratelimit = balanced_dirty_ratelimit;
+	 *
+	 * However to get a more stable dirty_ratelimit, the below elaborated
+	 * code makes use of task_ratelimit to filter out sigular points and
+	 * limit the step size.
+	 *
+	 * The below code essentially only uses the relative value of
+	 *
+	 *	task_ratelimit - dirty_ratelimit
+	 *	= (pos_ratio - 1) * dirty_ratelimit
+	 *
+	 * which reflects the direction and size of dirty position error.
+	 */
+
+	/*
+	 * dirty_ratelimit will follow balanced_dirty_ratelimit iff
+	 * task_ratelimit is on the same side of dirty_ratelimit, too.
+	 * For example, when
+	 * - dirty_ratelimit > balanced_dirty_ratelimit
+	 * - dirty_ratelimit > task_ratelimit (dirty pages are above setpoint)
+	 * lowering dirty_ratelimit will help meet both the position and rate
+	 * control targets. Otherwise, don't update dirty_ratelimit if it will
+	 * only help meet the rate target. After all, what the users ultimately
+	 * feel and care are stable dirty rate and small position error.
+	 *
+	 * |task_ratelimit - dirty_ratelimit| is used to limit the step size
+	 * and filter out the sigular points of balanced_dirty_ratelimit. Which
+	 * keeps jumping around randomly and can even leap far away at times
+	 * due to the small 200ms estimation period of dirty_rate (we want to
+	 * keep that period small to reduce time lags).
+	 */
+	step = 0;
+	if (dirty < setpoint) {
+		x = min(bdi->balanced_dirty_ratelimit,
+			 min(balanced_dirty_ratelimit, task_ratelimit));
+		if (dirty_ratelimit < x)
+			step = x - dirty_ratelimit;
+	} else {
+		x = max(bdi->balanced_dirty_ratelimit,
+			 max(balanced_dirty_ratelimit, task_ratelimit));
+		if (dirty_ratelimit > x)
+			step = dirty_ratelimit - x;
+	}
+
+	/*
+	 * Don't pursue 100% rate matching. It's impossible since the balanced
+	 * rate itself is constantly fluctuating. So decrease the track speed
+	 * when it gets close to the target. Helps eliminate pointless tremors.
+	 */
+	step >>= dirty_ratelimit / (2 * step + 1);
+	/*
+	 * Limit the tracking speed to avoid overshooting.
+	 */
+	step = (step + 7) / 8;
+
+	if (dirty_ratelimit < balanced_dirty_ratelimit)
+		dirty_ratelimit += step;
+	else
+		dirty_ratelimit -= step;
+
+	bdi->dirty_ratelimit = max(dirty_ratelimit, 1UL);
+	bdi->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
+
+	trace_bdi_dirty_ratelimit(bdi, dirty_rate, task_ratelimit);
+}
+
 void __bdi_update_bandwidth(struct backing_dev_info *bdi,
 			    unsigned long thresh,
+			    unsigned long bg_thresh,
 			    unsigned long dirty,
 			    unsigned long bdi_thresh,
 			    unsigned long bdi_dirty,
@@ -602,6 +884,7 @@
 {
 	unsigned long now = jiffies;
 	unsigned long elapsed = now - bdi->bw_time_stamp;
+	unsigned long dirtied;
 	unsigned long written;
 
 	/*
@@ -610,6 +893,7 @@
 	if (elapsed < BANDWIDTH_INTERVAL)
 		return;
 
+	dirtied = percpu_counter_read(&bdi->bdi_stat[BDI_DIRTIED]);
 	written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
 
 	/*
@@ -619,18 +903,23 @@
 	if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
 		goto snapshot;
 
-	if (thresh)
+	if (thresh) {
 		global_update_bandwidth(thresh, dirty, now);
-
+		bdi_update_dirty_ratelimit(bdi, thresh, bg_thresh, dirty,
+					   bdi_thresh, bdi_dirty,
+					   dirtied, elapsed);
+	}
 	bdi_update_write_bandwidth(bdi, elapsed, written);
 
 snapshot:
+	bdi->dirtied_stamp = dirtied;
 	bdi->written_stamp = written;
 	bdi->bw_time_stamp = now;
 }
 
 static void bdi_update_bandwidth(struct backing_dev_info *bdi,
 				 unsigned long thresh,
+				 unsigned long bg_thresh,
 				 unsigned long dirty,
 				 unsigned long bdi_thresh,
 				 unsigned long bdi_dirty,
@@ -639,37 +928,99 @@
 	if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
 		return;
 	spin_lock(&bdi->wb.list_lock);
-	__bdi_update_bandwidth(bdi, thresh, dirty, bdi_thresh, bdi_dirty,
-			       start_time);
+	__bdi_update_bandwidth(bdi, thresh, bg_thresh, dirty,
+			       bdi_thresh, bdi_dirty, start_time);
 	spin_unlock(&bdi->wb.list_lock);
 }
 
 /*
+ * After a task dirtied this many pages, balance_dirty_pages_ratelimited_nr()
+ * will look to see if it needs to start dirty throttling.
+ *
+ * If dirty_poll_interval is too low, big NUMA machines will call the expensive
+ * global_page_state() too often. So scale it near-sqrt to the safety margin
+ * (the number of pages we may dirty without exceeding the dirty limits).
+ */
+static unsigned long dirty_poll_interval(unsigned long dirty,
+					 unsigned long thresh)
+{
+	if (thresh > dirty)
+		return 1UL << (ilog2(thresh - dirty) >> 1);
+
+	return 1;
+}
+
+static unsigned long bdi_max_pause(struct backing_dev_info *bdi,
+				   unsigned long bdi_dirty)
+{
+	unsigned long bw = bdi->avg_write_bandwidth;
+	unsigned long hi = ilog2(bw);
+	unsigned long lo = ilog2(bdi->dirty_ratelimit);
+	unsigned long t;
+
+	/* target for 20ms max pause on 1-dd case */
+	t = HZ / 50;
+
+	/*
+	 * Scale up pause time for concurrent dirtiers in order to reduce CPU
+	 * overheads.
+	 *
+	 * (N * 20ms) on 2^N concurrent tasks.
+	 */
+	if (hi > lo)
+		t += (hi - lo) * (20 * HZ) / 1024;
+
+	/*
+	 * Limit pause time for small memory systems. If sleeping for too long
+	 * time, a small pool of dirty/writeback pages may go empty and disk go
+	 * idle.
+	 *
+	 * 8 serves as the safety ratio.
+	 */
+	if (bdi_dirty)
+		t = min(t, bdi_dirty * HZ / (8 * bw + 1));
+
+	/*
+	 * The pause time will be settled within range (max_pause/4, max_pause).
+	 * Apply a minimal value of 4 to get a non-zero max_pause/4.
+	 */
+	return clamp_val(t, 4, MAX_PAUSE);
+}
+
+/*
  * balance_dirty_pages() must be called by processes which are generating dirty
  * data.  It looks at the number of dirty pages in the machine and will force
- * the caller to perform writeback if the system is over `vm_dirty_ratio'.
+ * the caller to wait once crossing the (background_thresh + dirty_thresh) / 2.
  * If we're over `background_thresh' then the writeback threads are woken to
  * perform some writeout.
  */
 static void balance_dirty_pages(struct address_space *mapping,
-				unsigned long write_chunk)
+				unsigned long pages_dirtied)
 {
-	unsigned long nr_reclaimable, bdi_nr_reclaimable;
+	unsigned long nr_reclaimable;	/* = file_dirty + unstable_nfs */
+	unsigned long bdi_reclaimable;
 	unsigned long nr_dirty;  /* = file_dirty + writeback + unstable_nfs */
 	unsigned long bdi_dirty;
+	unsigned long freerun;
 	unsigned long background_thresh;
 	unsigned long dirty_thresh;
 	unsigned long bdi_thresh;
-	unsigned long task_bdi_thresh;
-	unsigned long min_task_bdi_thresh;
-	unsigned long pages_written = 0;
-	unsigned long pause = 1;
+	long pause = 0;
+	long uninitialized_var(max_pause);
 	bool dirty_exceeded = false;
-	bool clear_dirty_exceeded = true;
+	unsigned long task_ratelimit;
+	unsigned long uninitialized_var(dirty_ratelimit);
+	unsigned long pos_ratio;
 	struct backing_dev_info *bdi = mapping->backing_dev_info;
 	unsigned long start_time = jiffies;
 
 	for (;;) {
+		/*
+		 * Unstable writes are a feature of certain networked
+		 * filesystems (i.e. NFS) in which data may have been
+		 * written to the server's write cache, but has not yet
+		 * been flushed to permanent storage.
+		 */
 		nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
 					global_page_state(NR_UNSTABLE_NFS);
 		nr_dirty = nr_reclaimable + global_page_state(NR_WRITEBACK);
@@ -681,12 +1032,28 @@
 		 * catch-up. This avoids (excessively) small writeouts
 		 * when the bdi limits are ramping up.
 		 */
-		if (nr_dirty <= (background_thresh + dirty_thresh) / 2)
+		freerun = dirty_freerun_ceiling(dirty_thresh,
+						background_thresh);
+		if (nr_dirty <= freerun)
 			break;
 
+		if (unlikely(!writeback_in_progress(bdi)))
+			bdi_start_background_writeback(bdi);
+
+		/*
+		 * bdi_thresh is not treated as some limiting factor as
+		 * dirty_thresh, due to reasons
+		 * - in JBOD setup, bdi_thresh can fluctuate a lot
+		 * - in a system with HDD and USB key, the USB key may somehow
+		 *   go into state (bdi_dirty >> bdi_thresh) either because
+		 *   bdi_dirty starts high, or because bdi_thresh drops low.
+		 *   In this case we don't want to hard throttle the USB key
+		 *   dirtiers for 100 seconds until bdi_dirty drops under
+		 *   bdi_thresh. Instead the auxiliary bdi control line in
+		 *   bdi_position_ratio() will let the dirtier task progress
+		 *   at some rate <= (write_bw / 2) for bringing down bdi_dirty.
+		 */
 		bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
-		min_task_bdi_thresh = task_min_dirty_limit(bdi_thresh);
-		task_bdi_thresh = task_dirty_limit(current, bdi_thresh);
 
 		/*
 		 * In order to avoid the stacked BDI deadlock we need
@@ -698,82 +1065,101 @@
 		 * actually dirty; with m+n sitting in the percpu
 		 * deltas.
 		 */
-		if (task_bdi_thresh < 2 * bdi_stat_error(bdi)) {
-			bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
-			bdi_dirty = bdi_nr_reclaimable +
+		if (bdi_thresh < 2 * bdi_stat_error(bdi)) {
+			bdi_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
+			bdi_dirty = bdi_reclaimable +
 				    bdi_stat_sum(bdi, BDI_WRITEBACK);
 		} else {
-			bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
-			bdi_dirty = bdi_nr_reclaimable +
+			bdi_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
+			bdi_dirty = bdi_reclaimable +
 				    bdi_stat(bdi, BDI_WRITEBACK);
 		}
 
-		/*
-		 * The bdi thresh is somehow "soft" limit derived from the
-		 * global "hard" limit. The former helps to prevent heavy IO
-		 * bdi or process from holding back light ones; The latter is
-		 * the last resort safeguard.
-		 */
-		dirty_exceeded = (bdi_dirty > task_bdi_thresh) ||
+		dirty_exceeded = (bdi_dirty > bdi_thresh) ||
 				  (nr_dirty > dirty_thresh);
-		clear_dirty_exceeded = (bdi_dirty <= min_task_bdi_thresh) &&
-					(nr_dirty <= dirty_thresh);
-
-		if (!dirty_exceeded)
-			break;
-
-		if (!bdi->dirty_exceeded)
+		if (dirty_exceeded && !bdi->dirty_exceeded)
 			bdi->dirty_exceeded = 1;
 
-		bdi_update_bandwidth(bdi, dirty_thresh, nr_dirty,
-				     bdi_thresh, bdi_dirty, start_time);
+		bdi_update_bandwidth(bdi, dirty_thresh, background_thresh,
+				     nr_dirty, bdi_thresh, bdi_dirty,
+				     start_time);
 
-		/* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
-		 * Unstable writes are a feature of certain networked
-		 * filesystems (i.e. NFS) in which data may have been
-		 * written to the server's write cache, but has not yet
-		 * been flushed to permanent storage.
-		 * Only move pages to writeback if this bdi is over its
-		 * threshold otherwise wait until the disk writes catch
-		 * up.
-		 */
-		trace_balance_dirty_start(bdi);
-		if (bdi_nr_reclaimable > task_bdi_thresh) {
-			pages_written += writeback_inodes_wb(&bdi->wb,
-							     write_chunk);
-			trace_balance_dirty_written(bdi, pages_written);
-			if (pages_written >= write_chunk)
-				break;		/* We've done our duty */
+		max_pause = bdi_max_pause(bdi, bdi_dirty);
+
+		dirty_ratelimit = bdi->dirty_ratelimit;
+		pos_ratio = bdi_position_ratio(bdi, dirty_thresh,
+					       background_thresh, nr_dirty,
+					       bdi_thresh, bdi_dirty);
+		task_ratelimit = ((u64)dirty_ratelimit * pos_ratio) >>
+							RATELIMIT_CALC_SHIFT;
+		if (unlikely(task_ratelimit == 0)) {
+			pause = max_pause;
+			goto pause;
 		}
-		__set_current_state(TASK_UNINTERRUPTIBLE);
-		io_schedule_timeout(pause);
-		trace_balance_dirty_wait(bdi);
+		pause = HZ * pages_dirtied / task_ratelimit;
+		if (unlikely(pause <= 0)) {
+			trace_balance_dirty_pages(bdi,
+						  dirty_thresh,
+						  background_thresh,
+						  nr_dirty,
+						  bdi_thresh,
+						  bdi_dirty,
+						  dirty_ratelimit,
+						  task_ratelimit,
+						  pages_dirtied,
+						  pause,
+						  start_time);
+			pause = 1; /* avoid resetting nr_dirtied_pause below */
+			break;
+		}
+		pause = min(pause, max_pause);
 
-		dirty_thresh = hard_dirty_limit(dirty_thresh);
+pause:
+		trace_balance_dirty_pages(bdi,
+					  dirty_thresh,
+					  background_thresh,
+					  nr_dirty,
+					  bdi_thresh,
+					  bdi_dirty,
+					  dirty_ratelimit,
+					  task_ratelimit,
+					  pages_dirtied,
+					  pause,
+					  start_time);
+		__set_current_state(TASK_KILLABLE);
+		io_schedule_timeout(pause);
+
 		/*
-		 * max-pause area. If dirty exceeded but still within this
-		 * area, no need to sleep for more than 200ms: (a) 8 pages per
-		 * 200ms is typically more than enough to curb heavy dirtiers;
-		 * (b) the pause time limit makes the dirtiers more responsive.
+		 * This is typically equal to (nr_dirty < dirty_thresh) and can
+		 * also keep "1000+ dd on a slow USB stick" under control.
 		 */
-		if (nr_dirty < dirty_thresh &&
-		    bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 &&
-		    time_after(jiffies, start_time + MAX_PAUSE))
+		if (task_ratelimit)
 			break;
 
-		/*
-		 * Increase the delay for each loop, up to our previous
-		 * default of taking a 100ms nap.
-		 */
-		pause <<= 1;
-		if (pause > HZ / 10)
-			pause = HZ / 10;
+		if (fatal_signal_pending(current))
+			break;
 	}
 
-	/* Clear dirty_exceeded flag only when no task can exceed the limit */
-	if (clear_dirty_exceeded && bdi->dirty_exceeded)
+	if (!dirty_exceeded && bdi->dirty_exceeded)
 		bdi->dirty_exceeded = 0;
 
+	current->nr_dirtied = 0;
+	if (pause == 0) { /* in freerun area */
+		current->nr_dirtied_pause =
+				dirty_poll_interval(nr_dirty, dirty_thresh);
+	} else if (pause <= max_pause / 4 &&
+		   pages_dirtied >= current->nr_dirtied_pause) {
+		current->nr_dirtied_pause = clamp_val(
+					dirty_ratelimit * (max_pause / 2) / HZ,
+					pages_dirtied + pages_dirtied / 8,
+					pages_dirtied * 4);
+	} else if (pause >= max_pause) {
+		current->nr_dirtied_pause = 1 | clamp_val(
+					dirty_ratelimit * (max_pause / 2) / HZ,
+					pages_dirtied / 4,
+					pages_dirtied - pages_dirtied / 8);
+	}
+
 	if (writeback_in_progress(bdi))
 		return;
 
@@ -785,8 +1171,10 @@
 	 * In normal mode, we start background writeout at the lower
 	 * background_thresh, to keep the amount of dirty memory low.
 	 */
-	if ((laptop_mode && pages_written) ||
-	    (!laptop_mode && (nr_reclaimable > background_thresh)))
+	if (laptop_mode)
+		return;
+
+	if (nr_reclaimable > background_thresh)
 		bdi_start_background_writeback(bdi);
 }
 
@@ -800,7 +1188,7 @@
 	}
 }
 
-static DEFINE_PER_CPU(unsigned long, bdp_ratelimits) = 0;
+static DEFINE_PER_CPU(int, bdp_ratelimits);
 
 /**
  * balance_dirty_pages_ratelimited_nr - balance dirty memory state
@@ -820,31 +1208,39 @@
 					unsigned long nr_pages_dirtied)
 {
 	struct backing_dev_info *bdi = mapping->backing_dev_info;
-	unsigned long ratelimit;
-	unsigned long *p;
+	int ratelimit;
+	int *p;
 
 	if (!bdi_cap_account_dirty(bdi))
 		return;
 
-	ratelimit = ratelimit_pages;
-	if (mapping->backing_dev_info->dirty_exceeded)
-		ratelimit = 8;
+	ratelimit = current->nr_dirtied_pause;
+	if (bdi->dirty_exceeded)
+		ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
 
-	/*
-	 * Check the rate limiting. Also, we do not want to throttle real-time
-	 * tasks in balance_dirty_pages(). Period.
-	 */
+	current->nr_dirtied += nr_pages_dirtied;
+
 	preempt_disable();
+	/*
+	 * This prevents one CPU to accumulate too many dirtied pages without
+	 * calling into balance_dirty_pages(), which can happen when there are
+	 * 1000+ tasks, all of them start dirtying pages at exactly the same
+	 * time, hence all honoured too large initial task->nr_dirtied_pause.
+	 */
 	p =  &__get_cpu_var(bdp_ratelimits);
-	*p += nr_pages_dirtied;
-	if (unlikely(*p >= ratelimit)) {
-		ratelimit = sync_writeback_pages(*p);
+	if (unlikely(current->nr_dirtied >= ratelimit))
 		*p = 0;
-		preempt_enable();
-		balance_dirty_pages(mapping, ratelimit);
-		return;
+	else {
+		*p += nr_pages_dirtied;
+		if (unlikely(*p >= ratelimit_pages)) {
+			*p = 0;
+			ratelimit = 0;
+		}
 	}
 	preempt_enable();
+
+	if (unlikely(current->nr_dirtied >= ratelimit))
+		balance_dirty_pages(mapping, current->nr_dirtied);
 }
 EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
 
@@ -900,7 +1296,8 @@
 	 * threshold
 	 */
 	if (bdi_has_dirty_io(&q->backing_dev_info))
-		bdi_start_writeback(&q->backing_dev_info, nr_pages);
+		bdi_start_writeback(&q->backing_dev_info, nr_pages,
+					WB_REASON_LAPTOP_TIMER);
 }
 
 /*
@@ -939,22 +1336,17 @@
  *
  * Here we set ratelimit_pages to a level which ensures that when all CPUs are
  * dirtying in parallel, we cannot go more than 3% (1/32) over the dirty memory
- * thresholds before writeback cuts in.
- *
- * But the limit should not be set too high.  Because it also controls the
- * amount of memory which the balance_dirty_pages() caller has to write back.
- * If this is too large then the caller will block on the IO queue all the
- * time.  So limit it to four megabytes - the balance_dirty_pages() caller
- * will write six megabyte chunks, max.
+ * thresholds.
  */
 
 void writeback_set_ratelimit(void)
 {
-	ratelimit_pages = vm_total_pages / (num_online_cpus() * 32);
+	unsigned long background_thresh;
+	unsigned long dirty_thresh;
+	global_dirty_limits(&background_thresh, &dirty_thresh);
+	ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
 	if (ratelimit_pages < 16)
 		ratelimit_pages = 16;
-	if (ratelimit_pages * PAGE_CACHE_SIZE > 4096 * 1024)
-		ratelimit_pages = (4096 * 1024) / PAGE_CACHE_SIZE;
 }
 
 static int __cpuinit
@@ -996,7 +1388,6 @@
 
 	shift = calc_period_shift();
 	prop_descriptor_init(&vm_completions, shift);
-	prop_descriptor_init(&vm_dirties, shift);
 }
 
 /**
@@ -1324,7 +1715,7 @@
 		__inc_zone_page_state(page, NR_FILE_DIRTY);
 		__inc_zone_page_state(page, NR_DIRTIED);
 		__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
-		task_dirty_inc(current);
+		__inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED);
 		task_io_account_write(PAGE_CACHE_SIZE);
 	}
 }
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index ea53496..12a48a88 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -50,14 +50,13 @@
 
 	if (!pages || !bitmap) {
 		if (may_alloc && !pages)
-			pages = pcpu_mem_alloc(pages_size);
+			pages = pcpu_mem_zalloc(pages_size);
 		if (may_alloc && !bitmap)
-			bitmap = pcpu_mem_alloc(bitmap_size);
+			bitmap = pcpu_mem_zalloc(bitmap_size);
 		if (!pages || !bitmap)
 			return NULL;
 	}
 
-	memset(pages, 0, pages_size);
 	bitmap_copy(bitmap, chunk->populated, pcpu_unit_pages);
 
 	*bitmapp = bitmap;
@@ -143,8 +142,8 @@
 				 int page_start, int page_end)
 {
 	flush_cache_vunmap(
-		pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start),
-		pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end));
+		pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start),
+		pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end));
 }
 
 static void __pcpu_unmap_pages(unsigned long addr, int nr_pages)
@@ -206,8 +205,8 @@
 				      int page_start, int page_end)
 {
 	flush_tlb_kernel_range(
-		pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start),
-		pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end));
+		pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start),
+		pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end));
 }
 
 static int __pcpu_map_pages(unsigned long addr, struct page **pages,
@@ -284,8 +283,8 @@
 				int page_start, int page_end)
 {
 	flush_cache_vmap(
-		pcpu_chunk_addr(chunk, pcpu_first_unit_cpu, page_start),
-		pcpu_chunk_addr(chunk, pcpu_last_unit_cpu, page_end));
+		pcpu_chunk_addr(chunk, pcpu_low_unit_cpu, page_start),
+		pcpu_chunk_addr(chunk, pcpu_high_unit_cpu, page_end));
 }
 
 /**
diff --git a/mm/percpu.c b/mm/percpu.c
index bf80e55..3bb810a 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -116,9 +116,9 @@
 static int pcpu_nr_slots __read_mostly;
 static size_t pcpu_chunk_struct_size __read_mostly;
 
-/* cpus with the lowest and highest unit numbers */
-static unsigned int pcpu_first_unit_cpu __read_mostly;
-static unsigned int pcpu_last_unit_cpu __read_mostly;
+/* cpus with the lowest and highest unit addresses */
+static unsigned int pcpu_low_unit_cpu __read_mostly;
+static unsigned int pcpu_high_unit_cpu __read_mostly;
 
 /* the address of the first chunk which starts with the kernel static area */
 void *pcpu_base_addr __read_mostly;
@@ -273,11 +273,11 @@
 	     (rs) = (re) + 1, pcpu_next_pop((chunk), &(rs), &(re), (end)))
 
 /**
- * pcpu_mem_alloc - allocate memory
+ * pcpu_mem_zalloc - allocate memory
  * @size: bytes to allocate
  *
  * Allocate @size bytes.  If @size is smaller than PAGE_SIZE,
- * kzalloc() is used; otherwise, vmalloc() is used.  The returned
+ * kzalloc() is used; otherwise, vzalloc() is used.  The returned
  * memory is always zeroed.
  *
  * CONTEXT:
@@ -286,7 +286,7 @@
  * RETURNS:
  * Pointer to the allocated area on success, NULL on failure.
  */
-static void *pcpu_mem_alloc(size_t size)
+static void *pcpu_mem_zalloc(size_t size)
 {
 	if (WARN_ON_ONCE(!slab_is_available()))
 		return NULL;
@@ -302,7 +302,7 @@
  * @ptr: memory to free
  * @size: size of the area
  *
- * Free @ptr.  @ptr should have been allocated using pcpu_mem_alloc().
+ * Free @ptr.  @ptr should have been allocated using pcpu_mem_zalloc().
  */
 static void pcpu_mem_free(void *ptr, size_t size)
 {
@@ -384,7 +384,7 @@
 	size_t old_size = 0, new_size = new_alloc * sizeof(new[0]);
 	unsigned long flags;
 
-	new = pcpu_mem_alloc(new_size);
+	new = pcpu_mem_zalloc(new_size);
 	if (!new)
 		return -ENOMEM;
 
@@ -604,11 +604,12 @@
 {
 	struct pcpu_chunk *chunk;
 
-	chunk = pcpu_mem_alloc(pcpu_chunk_struct_size);
+	chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size);
 	if (!chunk)
 		return NULL;
 
-	chunk->map = pcpu_mem_alloc(PCPU_DFL_MAP_ALLOC * sizeof(chunk->map[0]));
+	chunk->map = pcpu_mem_zalloc(PCPU_DFL_MAP_ALLOC *
+						sizeof(chunk->map[0]));
 	if (!chunk->map) {
 		kfree(chunk);
 		return NULL;
@@ -977,6 +978,17 @@
  * address.  The caller is responsible for ensuring @addr stays valid
  * until this function finishes.
  *
+ * percpu allocator has special setup for the first chunk, which currently
+ * supports either embedding in linear address space or vmalloc mapping,
+ * and, from the second one, the backing allocator (currently either vm or
+ * km) provides translation.
+ *
+ * The addr can be tranlated simply without checking if it falls into the
+ * first chunk. But the current code reflects better how percpu allocator
+ * actually works, and the verification can discover both bugs in percpu
+ * allocator itself and per_cpu_ptr_to_phys() callers. So we keep current
+ * code.
+ *
  * RETURNS:
  * The physical address for @addr.
  */
@@ -984,19 +996,19 @@
 {
 	void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
 	bool in_first_chunk = false;
-	unsigned long first_start, first_end;
+	unsigned long first_low, first_high;
 	unsigned int cpu;
 
 	/*
-	 * The following test on first_start/end isn't strictly
+	 * The following test on unit_low/high isn't strictly
 	 * necessary but will speed up lookups of addresses which
 	 * aren't in the first chunk.
 	 */
-	first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0);
-	first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu,
-				    pcpu_unit_pages);
-	if ((unsigned long)addr >= first_start &&
-	    (unsigned long)addr < first_end) {
+	first_low = pcpu_chunk_addr(pcpu_first_chunk, pcpu_low_unit_cpu, 0);
+	first_high = pcpu_chunk_addr(pcpu_first_chunk, pcpu_high_unit_cpu,
+				     pcpu_unit_pages);
+	if ((unsigned long)addr >= first_low &&
+	    (unsigned long)addr < first_high) {
 		for_each_possible_cpu(cpu) {
 			void *start = per_cpu_ptr(base, cpu);
 
@@ -1233,7 +1245,9 @@
 
 	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
 		unit_map[cpu] = UINT_MAX;
-	pcpu_first_unit_cpu = NR_CPUS;
+
+	pcpu_low_unit_cpu = NR_CPUS;
+	pcpu_high_unit_cpu = NR_CPUS;
 
 	for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) {
 		const struct pcpu_group_info *gi = &ai->groups[group];
@@ -1253,9 +1267,13 @@
 			unit_map[cpu] = unit + i;
 			unit_off[cpu] = gi->base_offset + i * ai->unit_size;
 
-			if (pcpu_first_unit_cpu == NR_CPUS)
-				pcpu_first_unit_cpu = cpu;
-			pcpu_last_unit_cpu = cpu;
+			/* determine low/high unit_cpu */
+			if (pcpu_low_unit_cpu == NR_CPUS ||
+			    unit_off[cpu] < unit_off[pcpu_low_unit_cpu])
+				pcpu_low_unit_cpu = cpu;
+			if (pcpu_high_unit_cpu == NR_CPUS ||
+			    unit_off[cpu] > unit_off[pcpu_high_unit_cpu])
+				pcpu_high_unit_cpu = cpu;
 		}
 	}
 	pcpu_nr_units = unit;
@@ -1889,7 +1907,7 @@
 
 		BUILD_BUG_ON(size > PAGE_SIZE);
 
-		map = pcpu_mem_alloc(size);
+		map = pcpu_mem_zalloc(size);
 		BUG_ON(!map);
 
 		spin_lock_irqsave(&pcpu_lock, flags);
diff --git a/mm/quicklist.c b/mm/quicklist.c
index 2876349..9422129 100644
--- a/mm/quicklist.c
+++ b/mm/quicklist.c
@@ -17,7 +17,6 @@
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <linux/module.h>
 #include <linux/quicklist.h>
 
 DEFINE_PER_CPU(struct quicklist [CONFIG_NR_QUICK], quicklist);
diff --git a/mm/readahead.c b/mm/readahead.c
index 867f9dd..cbcbb02 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -11,7 +11,7 @@
 #include <linux/fs.h>
 #include <linux/gfp.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
 #include <linux/task_io_accounting_ops.h>
diff --git a/mm/rmap.c b/mm/rmap.c
index 6541cf7..a4fd368 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -51,7 +51,7 @@
 #include <linux/ksm.h>
 #include <linux/rmap.h>
 #include <linux/rcupdate.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/memcontrol.h>
 #include <linux/mmu_notifier.h>
 #include <linux/migrate.h>
diff --git a/mm/shmem.c b/mm/shmem.c
index 45b9acb..d6722506 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -28,7 +28,7 @@
 #include <linux/pagemap.h>
 #include <linux/file.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/swap.h>
 
 static struct vfsmount *shm_mnt;
diff --git a/mm/slob.c b/mm/slob.c
index bf39181..8105be4 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -63,7 +63,7 @@
 #include <linux/swap.h> /* struct reclaim_state */
 #include <linux/cache.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/rcupdate.h>
 #include <linux/list.h>
 #include <linux/kmemleak.h>
diff --git a/mm/slub.c b/mm/slub.c
index 7d2a996..ed3334d 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1862,7 +1862,7 @@
 {
 	struct kmem_cache_node *n = NULL;
 	struct kmem_cache_cpu *c = this_cpu_ptr(s->cpu_slab);
-	struct page *page;
+	struct page *page, *discard_page = NULL;
 
 	while ((page = c->partial)) {
 		enum slab_modes { M_PARTIAL, M_FREE };
@@ -1904,7 +1904,8 @@
 				if (l == M_PARTIAL)
 					remove_partial(n, page);
 				else
-					add_partial(n, page, 1);
+					add_partial(n, page,
+						DEACTIVATE_TO_TAIL);
 
 				l = m;
 			}
@@ -1915,14 +1916,22 @@
 				"unfreezing slab"));
 
 		if (m == M_FREE) {
-			stat(s, DEACTIVATE_EMPTY);
-			discard_slab(s, page);
-			stat(s, FREE_SLAB);
+			page->next = discard_page;
+			discard_page = page;
 		}
 	}
 
 	if (n)
 		spin_unlock(&n->list_lock);
+
+	while (discard_page) {
+		page = discard_page;
+		discard_page = discard_page->next;
+
+		stat(s, DEACTIVATE_EMPTY);
+		discard_slab(s, page);
+		stat(s, FREE_SLAB);
+	}
 }
 
 /*
@@ -1969,7 +1978,7 @@
 		page->pobjects = pobjects;
 		page->next = oldpage;
 
-	} while (this_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage);
+	} while (irqsafe_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage);
 	stat(s, CPU_PARTIAL_FREE);
 	return pobjects;
 }
@@ -4435,30 +4444,31 @@
 
 		for_each_possible_cpu(cpu) {
 			struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+			int node = ACCESS_ONCE(c->node);
 			struct page *page;
 
-			if (!c || c->node < 0)
+			if (node < 0)
 				continue;
-
-			if (c->page) {
-					if (flags & SO_TOTAL)
-						x = c->page->objects;
+			page = ACCESS_ONCE(c->page);
+			if (page) {
+				if (flags & SO_TOTAL)
+					x = page->objects;
 				else if (flags & SO_OBJECTS)
-					x = c->page->inuse;
+					x = page->inuse;
 				else
 					x = 1;
 
 				total += x;
-				nodes[c->node] += x;
+				nodes[node] += x;
 			}
 			page = c->partial;
 
 			if (page) {
 				x = page->pobjects;
-                                total += x;
-                                nodes[c->node] += x;
+				total += x;
+				nodes[node] += x;
 			}
-			per_cpu[c->node]++;
+			per_cpu[node]++;
 		}
 	}
 
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index 64b9840..1b7e22a 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -21,7 +21,6 @@
 #include <linux/mmzone.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
-#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/vmalloc.h>
diff --git a/mm/sparse.c b/mm/sparse.c
index 858e1df..61d7cde 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -6,7 +6,7 @@
 #include <linux/mmzone.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/vmalloc.h>
 #include "internal.h"
diff --git a/mm/swap.c b/mm/swap.c
index 87627f1..a91caf7 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -21,7 +21,7 @@
 #include <linux/pagemap.h>
 #include <linux/pagevec.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/mm_inline.h>
 #include <linux/buffer_head.h>	/* for try_to_release_page() */
 #include <linux/percpu_counter.h>
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 46680461..78cc4d1 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -6,7 +6,6 @@
  *
  *  Rewritten to use page cache, (C) 1998 Stephen Tweedie
  */
-#include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/gfp.h>
 #include <linux/kernel_stat.h>
diff --git a/mm/swapfile.c b/mm/swapfile.c
index c9d6540..b1cd120 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -21,7 +21,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/ksm.h>
 #include <linux/rmap.h>
 #include <linux/security.h>
diff --git a/mm/truncate.c b/mm/truncate.c
index b40ac6d..632b15e 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -12,7 +12,7 @@
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/pagemap.h>
 #include <linux/highmem.h>
 #include <linux/pagevec.h>
diff --git a/mm/util.c b/mm/util.c
index 88ea1bd..136ac4f 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -1,7 +1,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <asm/uaccess.h>
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index b669aa6..3231bf3 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2141,23 +2141,30 @@
 
 static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
 {
-	/* apply_to_page_range() does all the hard work. */
+	pte_t ***p = data;
+
+	if (p) {
+		*(*p) = pte;
+		(*p)++;
+	}
 	return 0;
 }
 
 /**
  *	alloc_vm_area - allocate a range of kernel address space
  *	@size:		size of the area
+ *	@ptes:		returns the PTEs for the address space
  *
  *	Returns:	NULL on failure, vm_struct on success
  *
  *	This function reserves a range of kernel address space, and
  *	allocates pagetables to map that range.  No actual mappings
- *	are created.  If the kernel address space is not shared
- *	between processes, it syncs the pagetable across all
- *	processes.
+ *	are created.
+ *
+ *	If @ptes is non-NULL, pointers to the PTEs (in init_mm)
+ *	allocated for the VM area are returned.
  */
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
 {
 	struct vm_struct *area;
 
@@ -2171,19 +2178,11 @@
 	 * of kernel virtual address space and mapped into init_mm.
 	 */
 	if (apply_to_page_range(&init_mm, (unsigned long)area->addr,
-				area->size, f, NULL)) {
+				size, f, ptes ? &ptes : NULL)) {
 		free_vm_area(area);
 		return NULL;
 	}
 
-	/*
-	 * If the allocated address space is passed to a hypercall
-	 * before being used then we cannot rely on a page fault to
-	 * trigger an update of the page tables.  So sync all the page
-	 * tables here.
-	 */
-	vmalloc_sync_all();
-
 	return area;
 }
 EXPORT_SYMBOL_GPL(alloc_vm_area);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 132d1dd..a1893c0 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2266,7 +2266,8 @@
 		 */
 		writeback_threshold = sc->nr_to_reclaim + sc->nr_to_reclaim / 2;
 		if (total_scanned > writeback_threshold) {
-			wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
+			wakeup_flusher_threads(laptop_mode ? 0 : total_scanned,
+						WB_REASON_TRY_TO_FREE_PAGES);
 			sc->may_writepage = 1;
 		}
 
diff --git a/net/802/fc.c b/net/802/fc.c
index 1e49f2d..bd345f3 100644
--- a/net/802/fc.c
+++ b/net/802/fc.c
@@ -27,6 +27,7 @@
 #include <linux/net.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <net/arp.h>
 
 /*
diff --git a/net/802/garp.c b/net/802/garp.c
index 070bf44..8e21b6d 100644
--- a/net/802/garp.c
+++ b/net/802/garp.c
@@ -15,6 +15,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/llc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/llc.h>
 #include <net/llc_pdu.h>
 #include <net/garp.h>
diff --git a/net/802/stp.c b/net/802/stp.c
index 0e136ef..15540b7 100644
--- a/net/802/stp.c
+++ b/net/802/stp.c
@@ -12,6 +12,7 @@
 #include <linux/etherdevice.h>
 #include <linux/llc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/llc.h>
 #include <net/llc_pdu.h>
 #include <net/stp.h>
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 163397f..f5ffc02 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -2,6 +2,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_vlan.h>
 #include <linux/netpoll.h>
+#include <linux/export.h>
 #include "vlan.h"
 
 bool vlan_do_receive(struct sk_buff **skbp, bool last_handler)
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index c8cf939..bc25286 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -470,10 +470,12 @@
 {
 	struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
 
-	if (change & IFF_ALLMULTI)
-		dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
-	if (change & IFF_PROMISC)
-		dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
+	if (dev->flags & IFF_UP) {
+		if (change & IFF_ALLMULTI)
+			dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
+		if (change & IFF_PROMISC)
+			dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
+	}
 }
 
 static void vlan_dev_set_rx_mode(struct net_device *vlan_dev)
diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c
index be9a5c1..235c219 100644
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/if_vlan.h>
+#include <linux/module.h>
 #include <net/net_namespace.h>
 #include <net/netlink.h>
 #include <net/rtnetlink.h>
diff --git a/net/appletalk/aarp.c b/net/appletalk/aarp.c
index 1acc695..173a2e8 100644
--- a/net/appletalk/aarp.c
+++ b/net/appletalk/aarp.c
@@ -39,6 +39,7 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 int sysctl_aarp_expiry_time = AARP_EXPIRY_TIME;
 int sysctl_aarp_tick_time = AARP_TICK_TIME;
diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c
index 6ef0e76..b5b1a22 100644
--- a/net/appletalk/atalk_proc.c
+++ b/net/appletalk/atalk_proc.c
@@ -14,6 +14,7 @@
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <linux/atalk.h>
+#include <linux/export.h>
 
 
 static __inline__ struct atalk_iface *atalk_get_interface_idx(loff_t pos)
diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index 437ee70..3a73491 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
+#include <linux/export.h>
 #include <net/sock.h>		/* for sock_no_* */
 
 #include "resources.h"		/* devs and vccs */
diff --git a/net/atm/svc.c b/net/atm/svc.c
index 754ee47..1281049 100644
--- a/net/atm/svc.c
+++ b/net/atm/svc.c
@@ -20,6 +20,7 @@
 #include <linux/bitops.h>
 #include <net/sock.h>		/* for sock_no_* */
 #include <linux/uaccess.h>
+#include <linux/export.h>
 
 #include "resources.h"
 #include "common.h"		/* common for PVCs and SVCs */
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index a169084..87fddab 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -38,6 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 static ax25_route *ax25_route_list;
 static DEFINE_RWLOCK(ax25_route_lock);
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
index d349be9..4c83137 100644
--- a/net/ax25/ax25_uid.c
+++ b/net/ax25/ax25_uid.c
@@ -37,6 +37,7 @@
 #include <linux/stat.h>
 #include <linux/netfilter.h>
 #include <linux/sysctl.h>
+#include <linux/export.h>
 #include <net/ip.h>
 #include <net/arp.h>
 
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c1c597e..e0af723 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -673,7 +673,7 @@
 		goto encrypt;
 
 auth:
-	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+	if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
 		return 0;
 
 	if (!hci_conn_auth(conn, sec_level, auth_type))
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b84458d..be84ae3 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -613,7 +613,7 @@
 	if (!test_bit(HCI_RAW, &hdev->flags)) {
 		set_bit(HCI_INIT, &hdev->flags);
 		__hci_request(hdev, hci_reset_req, 0,
-					msecs_to_jiffies(250));
+					msecs_to_jiffies(HCI_INIT_TIMEOUT));
 		clear_bit(HCI_INIT, &hdev->flags);
 	}
 
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 22f1a6c..661b461 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -5,6 +5,7 @@
 #include <linux/init.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/module.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 8cd1291..5ea94a1 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -251,7 +251,7 @@
 
 	if (sock_owned_by_user(sk)) {
 		/* sk is owned by user. Try again later */
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		chan_put(chan);
 		return;
@@ -2488,7 +2488,7 @@
 		if (sock_owned_by_user(sk)) {
 			l2cap_state_change(chan, BT_DISCONN);
 			__clear_chan_timer(chan);
-			__set_chan_timer(chan, HZ / 5);
+			__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 			break;
 		}
 
@@ -2661,7 +2661,7 @@
 
 	default:
 		sk->sk_err = ECONNRESET;
-		__set_chan_timer(chan, HZ * 5);
+		__set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
 		l2cap_send_disconn_req(conn, chan, ECONNRESET);
 		goto done;
 	}
@@ -2718,7 +2718,7 @@
 	if (sock_owned_by_user(sk)) {
 		l2cap_state_change(chan, BT_DISCONN);
 		__clear_chan_timer(chan);
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		return 0;
 	}
@@ -2752,7 +2752,7 @@
 	if (sock_owned_by_user(sk)) {
 		l2cap_state_change(chan,BT_DISCONN);
 		__clear_chan_timer(chan);
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		return 0;
 	}
@@ -3998,7 +3998,7 @@
 	if (encrypt == 0x00) {
 		if (chan->sec_level == BT_SECURITY_MEDIUM) {
 			__clear_chan_timer(chan);
-			__set_chan_timer(chan, HZ * 5);
+			__set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
 		} else if (chan->sec_level == BT_SECURITY_HIGH)
 			l2cap_chan_close(chan, ECONNREFUSED);
 	} else {
@@ -4066,7 +4066,7 @@
 					L2CAP_CONN_REQ, sizeof(req), &req);
 			} else {
 				__clear_chan_timer(chan);
-				__set_chan_timer(chan, HZ / 10);
+				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 			}
 		} else if (chan->state == BT_CONNECT2) {
 			struct l2cap_conn_rsp rsp;
@@ -4086,7 +4086,7 @@
 				}
 			} else {
 				l2cap_state_change(chan, BT_DISCONN);
-				__set_chan_timer(chan, HZ / 10);
+				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 				res = L2CAP_CR_SEC_BLOCK;
 				stat = L2CAP_CS_NO_INFO;
 			}
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index e829236..5c406d3 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -27,6 +27,7 @@
 /* Bluetooth L2CAP sockets. */
 
 #include <linux/security.h>
+#include <linux/export.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 5a94eec..2c76342 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -23,6 +23,7 @@
 /* Bluetooth HCI Management interface */
 
 #include <linux/uaccess.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -147,8 +148,6 @@
 
 		hci_del_off_timer(d);
 
-		set_bit(HCI_MGMT, &d->flags);
-
 		if (test_bit(HCI_SETUP, &d->flags))
 			continue;
 
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 38b618c..4e32e18 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1802,6 +1802,11 @@
 			continue;
 		}
 
+		if (test_bit(RFCOMM_ENC_DROP, &d->flags)) {
+			__rfcomm_dlc_close(d, ECONNREFUSED);
+			continue;
+		}
+
 		if (test_and_clear_bit(RFCOMM_AUTH_ACCEPT, &d->flags)) {
 			rfcomm_dlc_clear_timer(d);
 			if (d->out) {
@@ -2077,7 +2082,7 @@
 		if (test_and_clear_bit(RFCOMM_SEC_PENDING, &d->flags)) {
 			rfcomm_dlc_clear_timer(d);
 			if (status || encrypt == 0x00) {
-				__rfcomm_dlc_close(d, ECONNREFUSED);
+				set_bit(RFCOMM_ENC_DROP, &d->flags);
 				continue;
 			}
 		}
@@ -2088,7 +2093,7 @@
 				rfcomm_dlc_set_timer(d, RFCOMM_AUTH_TIMEOUT);
 				continue;
 			} else if (d->sec_level == BT_SECURITY_HIGH) {
-				__rfcomm_dlc_close(d, ECONNREFUSED);
+				set_bit(RFCOMM_ENC_DROP, &d->flags);
 				continue;
 			}
 		}
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 6f9f8c0..5a31731 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -16,6 +16,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/netfilter_bridge.h>
+#include <linux/export.h>
 #include "br_private.h"
 
 /* Bridge group multicast address 802.1d (pg 51). */
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 995cbe0..a5f4e57 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1501,6 +1501,8 @@
 
 	__skb_pull(skb2, offset);
 	skb_reset_transport_header(skb2);
+	skb_postpull_rcsum(skb2, skb_network_header(skb2),
+			   skb_network_header_len(skb2));
 
 	icmp6_type = icmp6_hdr(skb2)->icmp6_type;
 
@@ -1770,7 +1772,7 @@
 	int err = 0;
 	struct net_bridge_mdb_htable *mdb;
 
-	spin_lock(&br->multicast_lock);
+	spin_lock_bh(&br->multicast_lock);
 	if (br->multicast_disabled == !val)
 		goto unlock;
 
@@ -1806,7 +1808,7 @@
 	}
 
 unlock:
-	spin_unlock(&br->multicast_lock);
+	spin_unlock_bh(&br->multicast_lock);
 
 	return err;
 }
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index e5f9ece3..a1daf82 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -18,6 +18,7 @@
 #include <net/sock.h>
 
 #include "br_private.h"
+#include "br_private_stp.h"
 
 static inline size_t br_nlmsg_size(void)
 {
@@ -188,6 +189,11 @@
 
 	p->state = new_state;
 	br_log_state(p);
+
+	spin_lock_bh(&p->br->lock);
+	br_port_state_selection(p->br);
+	spin_unlock_bh(&p->br->lock);
+
 	br_ifinfo_notify(RTM_NEWLINK, p);
 
 	return 0;
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index ad0a3f7..dd147d7 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -399,25 +399,24 @@
 	struct net_bridge_port *p;
 	unsigned int liveports = 0;
 
-	/* Don't change port states if userspace is handling STP */
-	if (br->stp_enabled == BR_USER_STP)
-		return;
-
 	list_for_each_entry(p, &br->port_list, list) {
 		if (p->state == BR_STATE_DISABLED)
 			continue;
 
-		if (p->port_no == br->root_port) {
-			p->config_pending = 0;
-			p->topology_change_ack = 0;
-			br_make_forwarding(p);
-		} else if (br_is_designated_port(p)) {
-			del_timer(&p->message_age_timer);
-			br_make_forwarding(p);
-		} else {
-			p->config_pending = 0;
-			p->topology_change_ack = 0;
-			br_make_blocking(p);
+		/* Don't change port states if userspace is handling STP */
+		if (br->stp_enabled != BR_USER_STP) {
+			if (p->port_no == br->root_port) {
+				p->config_pending = 0;
+				p->topology_change_ack = 0;
+				br_make_forwarding(p);
+			} else if (br_is_designated_port(p)) {
+				del_timer(&p->message_age_timer);
+				br_make_forwarding(p);
+			} else {
+				p->config_pending = 0;
+				p->topology_change_ack = 0;
+				br_make_blocking(p);
+			}
 		}
 
 		if (p->state == BR_STATE_FORWARDING)
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 10eda3c..19308e3 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/kmod.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
 
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index bf2a333..5449294 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -102,16 +102,15 @@
 	unsigned int n;
 
 	n = max(size, nlbufsiz);
-	skb = alloc_skb(n, GFP_ATOMIC);
+	skb = alloc_skb(n, GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
-		pr_debug("cannot alloc whole buffer of size %ub!\n", n);
 		if (n > size) {
 			/* try to allocate only as much as we need for
 			 * current packet */
 			skb = alloc_skb(size, GFP_ATOMIC);
 			if (!skb)
-				pr_debug("cannot even allocate "
-					 "buffer of size %ub\n", size);
+				pr_debug("cannot even allocate buffer of size %ub\n",
+					 size);
 		}
 	}
 
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 47fc8f3..f1fa1f6 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -16,6 +16,7 @@
 #include <linux/net.h>
 #include <linux/netdevice.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <net/netns/generic.h>
 #include <net/net_namespace.h>
 #include <net/pkt_sched.h>
diff --git a/net/caif/cffrml.c b/net/caif/cffrml.c
index f399211..d3ca87b 100644
--- a/net/caif/cffrml.c
+++ b/net/caif/cffrml.c
@@ -136,20 +136,21 @@
 
 static int cffrml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 {
-	int tmp;
 	u16 chks;
 	u16 len;
+	__le16 data;
+
 	struct cffrml *this = container_obj(layr);
 	if (this->dofcs) {
 		chks = cfpkt_iterate(pkt, cffrml_checksum, 0xffff);
-		tmp = cpu_to_le16(chks);
-		cfpkt_add_trail(pkt, &tmp, 2);
+		data = cpu_to_le16(chks);
+		cfpkt_add_trail(pkt, &data, 2);
 	} else {
 		cfpkt_pad_trail(pkt, 2);
 	}
 	len = cfpkt_getlen(pkt);
-	tmp = cpu_to_le16(len);
-	cfpkt_add_head(pkt, &tmp, 2);
+	data = cpu_to_le16(len);
+	cfpkt_add_head(pkt, &data, 2);
 	cfpkt_info(pkt)->hdr_len += 2;
 	if (cfpkt_erroneous(pkt)) {
 		pr_err("Packet is erroneous!\n");
diff --git a/net/caif/cfpkt_skbuff.c b/net/caif/cfpkt_skbuff.c
index 75d4bfa..df08c47 100644
--- a/net/caif/cfpkt_skbuff.c
+++ b/net/caif/cfpkt_skbuff.c
@@ -9,6 +9,7 @@
 #include <linux/string.h>
 #include <linux/skbuff.h>
 #include <linux/hardirq.h>
+#include <linux/export.h>
 #include <net/caif/cfpkt.h>
 
 #define PKT_PREFIX  48
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f466930..ad5b708 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -18,6 +18,7 @@
 #include <linux/ceph/messenger.h>
 #include <linux/ceph/decode.h>
 #include <linux/ceph/pagelist.h>
+#include <linux/export.h>
 
 /*
  * Ceph uses the messenger to exchange ceph_msg messages with other
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 733e4600..f4f3f58 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -244,7 +244,7 @@
 		ceph_pagelist_init(req->r_trail);
 	}
 	/* create request message; allow space for oid */
-	msg_size += 40;
+	msg_size += MAX_OBJ_NAME_SIZE;
 	if (snapc)
 		msg_size += sizeof(u64) * snapc->num_snaps;
 	if (use_mempool)
diff --git a/net/compat.c b/net/compat.c
index c578d93..6def90e 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -22,6 +22,7 @@
 #include <linux/filter.h>
 #include <linux/compat.h>
 #include <linux/security.h>
+#include <linux/export.h>
 
 #include <net/scm.h>
 #include <net/sock.h>
diff --git a/net/core/dev.c b/net/core/dev.c
index 6ba50a1..5a13edf 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1396,7 +1396,7 @@
 	for_each_net(net) {
 		for_each_netdev(net, dev) {
 			if (dev == last)
-				break;
+				goto outroll;
 
 			if (dev->flags & IFF_UP) {
 				nb->notifier_call(nb, NETDEV_GOING_DOWN, dev);
@@ -1407,6 +1407,7 @@
 		}
 	}
 
+outroll:
 	raw_notifier_chain_unregister(&netdev_chain, nb);
 	goto unlock;
 }
@@ -4282,6 +4283,12 @@
 			    sizeof(struct dev_iter_state));
 }
 
+int dev_seq_open_ops(struct inode *inode, struct file *file,
+		     const struct seq_operations *ops)
+{
+	return seq_open_net(inode, file, ops, sizeof(struct dev_iter_state));
+}
+
 static const struct file_operations dev_seq_fops = {
 	.owner	 = THIS_MODULE,
 	.open    = dev_seq_open,
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 283d1b8..febba51 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -13,6 +13,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/rtnetlink.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/proc_fs.h>
 
@@ -695,8 +696,7 @@
 
 static int dev_mc_seq_open(struct inode *inode, struct file *file)
 {
-	return seq_open_net(inode, file, &dev_mc_seq_ops,
-			    sizeof(struct seq_net_private));
+	return dev_seq_open_ops(inode, file, &dev_mc_seq_ops);
 }
 
 static const struct file_operations dev_mc_seq_fops = {
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 57e8f95..c02e63c 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/list.h>
+#include <linux/module.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <net/fib_rules.h>
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 909ecb3..5ac07d3 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -872,12 +872,8 @@
 	now = jiffies;
 	next = now + HZ;
 
-	if (!(state & NUD_IN_TIMER)) {
-#ifndef CONFIG_SMP
-		printk(KERN_WARNING "neigh: timer & !nud_in_timer\n");
-#endif
+	if (!(state & NUD_IN_TIMER))
 		goto out;
-	}
 
 	if (state & NUD_REACHABLE) {
 		if (time_before_eq(now,
@@ -2401,7 +2397,10 @@
 	struct net *net = seq_file_net(seq);
 	struct neigh_table *tbl = state->tbl;
 
-	pn = pn->next;
+	do {
+		pn = pn->next;
+	} while (pn && !net_eq(pneigh_net(pn), net));
+
 	while (!pn) {
 		if (++state->bucket > PNEIGH_HASHMASK)
 			break;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 7604a63..c71c434 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -20,6 +20,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/wireless.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <net/wext.h>
 
 #include "net-sysfs.h"
diff --git a/net/core/net-traces.c b/net/core/net-traces.c
index 52380b1..ba3c012 100644
--- a/net/core/net-traces.c
+++ b/net/core/net-traces.c
@@ -11,6 +11,7 @@
 #include <linux/inetdevice.h>
 #include <linux/inet.h>
 #include <linux/interrupt.h>
+#include <linux/export.h>
 #include <linux/netpoll.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 5bbdbf0..aefcd7a 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -10,6 +10,7 @@
 #include <linux/nsproxy.h>
 #include <linux/proc_fs.h>
 #include <linux/file.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
 
diff --git a/net/core/netevent.c b/net/core/netevent.c
index 865f0ce..f17ccd2 100644
--- a/net/core/netevent.c
+++ b/net/core/netevent.c
@@ -15,6 +15,7 @@
 
 #include <linux/rtnetlink.h>
 #include <linux/notifier.h>
+#include <linux/export.h>
 #include <net/netevent.h>
 
 static ATOMIC_NOTIFIER_HEAD(netevent_notif_chain);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index f57d946..cf64c1f 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -23,6 +23,7 @@
 #include <linux/rcupdate.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/tcp.h>
 #include <net/udp.h>
 #include <asm/unaligned.h>
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ca4db40..3c30ee4 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -189,6 +189,7 @@
 	 * aligned memory blocks, unless SLUB/SLAB debug is enabled.
 	 * Both skb->head and skb_shared_info are cache line aligned.
 	 */
+	size = SKB_DATA_ALIGN(size);
 	size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 	data = kmalloc_node_track_caller(size, gfp_mask, node);
 	if (!data)
@@ -2229,7 +2230,7 @@
  * @shiftlen: shift up to this many bytes
  *
  * Attempts to shift up to shiftlen worth of bytes, which may be less than
- * the length of the skb, from tgt to skb. Returns number bytes shifted.
+ * the length of the skb, from skb to tgt. Returns number bytes shifted.
  * It's up to caller to free skb if everything was shifted.
  *
  * If @tgt runs out of frags, the whole operation is aborted.
diff --git a/net/core/timestamping.c b/net/core/timestamping.c
index 82fb288..661b5a4 100644
--- a/net/core/timestamping.c
+++ b/net/core/timestamping.c
@@ -21,6 +21,7 @@
 #include <linux/phy.h>
 #include <linux/ptp_classify.h>
 #include <linux/skbuff.h>
+#include <linux/export.h>
 
 static struct sock_filter ptp_filter[] = {
 	PTP_FILTER
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 2d7cf3d..1b5fefd 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -27,6 +27,7 @@
 
 #include <linux/dmaengine.h>
 #include <linux/socket.h>
+#include <linux/export.h>
 #include <net/tcp.h>
 #include <net/netdma.h>
 
diff --git a/net/dcb/dcbevent.c b/net/dcb/dcbevent.c
index 665a880..1d9eb7c 100644
--- a/net/dcb/dcbevent.c
+++ b/net/dcb/dcbevent.c
@@ -19,6 +19,7 @@
 
 #include <linux/rtnetlink.h>
 #include <linux/notifier.h>
+#include <linux/export.h>
 
 static ATOMIC_NOTIFIER_HEAD(dcbevent_notif_chain);
 
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 9bfbc1d..d860530 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -25,6 +25,7 @@
 #include <linux/dcbnl.h>
 #include <net/dcbevent.h>
 #include <linux/rtnetlink.h>
+#include <linux/module.h>
 #include <net/sock.h>
 
 /**
diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c
index 25b7a8d..ba07824 100644
--- a/net/dccp/ackvec.c
+++ b/net/dccp/ackvec.c
@@ -12,6 +12,7 @@
 #include "dccp.h"
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 static struct kmem_cache *dccp_ackvec_slab;
 static struct kmem_cache *dccp_ackvec_record_slab;
diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c
index 4902029..1f94b7e 100644
--- a/net/dccp/ccids/lib/tfrc.c
+++ b/net/dccp/ccids/lib/tfrc.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2007 The University of Aberdeen, Scotland, UK
  * Copyright (c) 2007 Arnaldo Carvalho de Melo <acme@redhat.com>
  */
+#include <linux/moduleparam.h>
 #include "tfrc.h"
 
 #ifdef CONFIG_IP_DCCP_TFRC_DEBUG
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 332639b..3f4e541 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -111,6 +111,7 @@
 	rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
 			       inet->inet_sport, inet->inet_dport, sk);
 	if (IS_ERR(rt)) {
+		err = PTR_ERR(rt);
 		rt = NULL;
 		goto failure;
 	}
@@ -433,6 +434,7 @@
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
 	return NULL;
 put_and_exit:
+	bh_unlock_sock(newsk);
 	sock_put(newsk);
 	goto exit;
 }
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 7587870..16f0b22 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -12,6 +12,7 @@
 
 #include <linux/dccp.h>
 #include <linux/skbuff.h>
+#include <linux/export.h>
 
 #include "dccp.h"
 
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 43450c1..94f4ec0 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -77,6 +77,7 @@
 #include <linux/netfilter_decnet.h>
 #include <linux/rcupdate.h>
 #include <linux/times.h>
+#include <linux/export.h>
 #include <asm/errno.h>
 #include <net/net_namespace.h>
 #include <net/netlink.h>
@@ -111,7 +112,7 @@
 static int dn_dst_gc(struct dst_ops *ops);
 static struct dst_entry *dn_dst_check(struct dst_entry *, __u32);
 static unsigned int dn_dst_default_advmss(const struct dst_entry *dst);
-static unsigned int dn_dst_default_mtu(const struct dst_entry *dst);
+static unsigned int dn_dst_mtu(const struct dst_entry *dst);
 static void dn_dst_destroy(struct dst_entry *);
 static struct dst_entry *dn_dst_negative_advice(struct dst_entry *);
 static void dn_dst_link_failure(struct sk_buff *);
@@ -134,7 +135,7 @@
 	.gc =			dn_dst_gc,
 	.check =		dn_dst_check,
 	.default_advmss =	dn_dst_default_advmss,
-	.default_mtu =		dn_dst_default_mtu,
+	.mtu =			dn_dst_mtu,
 	.cow_metrics =		dst_cow_metrics_generic,
 	.destroy =		dn_dst_destroy,
 	.negative_advice =	dn_dst_negative_advice,
@@ -824,9 +825,11 @@
 	return dn_mss_from_pmtu(dst->dev, dst_mtu(dst));
 }
 
-static unsigned int dn_dst_default_mtu(const struct dst_entry *dst)
+static unsigned int dn_dst_mtu(const struct dst_entry *dst)
 {
-	return dst->dev->mtu;
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	return mtu ? : dst->dev->mtu;
 }
 
 static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index f0efb0c..f65c9dd 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/rcupdate.h>
+#include <linux/export.h>
 #include <net/neighbour.h>
 #include <net/dst.h>
 #include <net/flow.h>
diff --git a/net/decnet/dn_timer.c b/net/decnet/dn_timer.c
index 67f691b..d9c150c 100644
--- a/net/decnet/dn_timer.c
+++ b/net/decnet/dn_timer.c
@@ -36,16 +36,13 @@
 
 void dn_start_slow_timer(struct sock *sk)
 {
-	sk->sk_timer.expires	= jiffies + SLOW_INTERVAL;
-	sk->sk_timer.function	= dn_slow_timer;
-	sk->sk_timer.data	= (unsigned long)sk;
-
-	add_timer(&sk->sk_timer);
+	setup_timer(&sk->sk_timer, dn_slow_timer, (unsigned long)sk);
+	sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL);
 }
 
 void dn_stop_slow_timer(struct sock *sk)
 {
-	del_timer(&sk->sk_timer);
+	sk_stop_timer(sk, &sk->sk_timer);
 }
 
 static void dn_slow_timer(unsigned long arg)
@@ -53,12 +50,10 @@
 	struct sock *sk = (struct sock *)arg;
 	struct dn_scp *scp = DN_SK(sk);
 
-	sock_hold(sk);
 	bh_lock_sock(sk);
 
 	if (sock_owned_by_user(sk)) {
-		sk->sk_timer.expires = jiffies + HZ / 10;
-		add_timer(&sk->sk_timer);
+		sk_reset_timer(sk, &sk->sk_timer, jiffies + HZ / 10);
 		goto out;
 	}
 
@@ -100,9 +95,7 @@
 			scp->keepalive_fxn(sk);
 	}
 
-	sk->sk_timer.expires = jiffies + SLOW_INTERVAL;
-
-	add_timer(&sk->sk_timer);
+	sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL);
 out:
 	bh_unlock_sock(sk);
 	sock_put(sk);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 3fb14b7..0dc1589 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -12,6 +12,7 @@
 #include <linux/netdevice.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/dsa.h>
 #include "dsa_priv.h"
 
diff --git a/net/ieee802154/nl-mac.c b/net/ieee802154/nl-mac.c
index 71ee110..adaf462 100644
--- a/net/ieee802154/nl-mac.c
+++ b/net/ieee802154/nl-mac.c
@@ -30,6 +30,7 @@
 #include <net/genetlink.h>
 #include <net/sock.h>
 #include <linux/nl802154.h>
+#include <linux/export.h>
 #include <net/af_ieee802154.h>
 #include <net/nl802154.h>
 #include <net/ieee802154.h>
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index c1f4154..36d1440 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -136,8 +136,6 @@
 		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 	}
 
-	err = ah->nexthdr;
-
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_output_resume(skb, err);
 }
@@ -264,12 +262,12 @@
 	if (err)
 		goto out;
 
+	err = ah->nexthdr;
+
 	skb->network_header += ah_hlen;
 	memcpy(skb_network_header(skb), work_iph, ihl);
 	__skb_pull(skb, ah_hlen + ihl);
 	skb_set_transport_header(skb, -ihl);
-
-	err = ah->nexthdr;
 out:
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_input_resume(skb, err);
@@ -371,8 +369,6 @@
 		if (err == -EINPROGRESS)
 			goto out;
 
-		if (err == -EBUSY)
-			err = NET_XMIT_DROP;
 		goto out_free;
 	}
 
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index c6b5092..65f01dc 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1490,7 +1490,9 @@
 			     void __user *buffer,
 			     size_t *lenp, loff_t *ppos)
 {
+	int old_value = *(int *)ctl->data;
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
+	int new_value = *(int *)ctl->data;
 
 	if (write) {
 		struct ipv4_devconf *cnf = ctl->extra1;
@@ -1501,6 +1503,9 @@
 
 		if (cnf == net->ipv4.devconf_dflt)
 			devinet_copy_dflt_conf(net, i);
+		if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1)
+			if ((new_value == 0) && (old_value != 0))
+				rt_cache_flush(net, 0);
 	}
 
 	return ret;
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index a53bb1b..46339ba 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -26,6 +26,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/rcupdate.h>
+#include <linux/export.h>
 #include <net/ip.h>
 #include <net/route.h>
 #include <net/tcp.h>
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 89d6f71..37b6711 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -73,6 +73,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/prefetch.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/ip.h>
 #include <net/protocol.h>
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index c7472ef..b2ca095 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1716,7 +1716,8 @@
 	if (err) {
 		int j;
 
-		pmc->sfcount[sfmode]--;
+		if (!delta)
+			pmc->sfcount[sfmode]--;
 		for (j=0; j<i; j++)
 			(void) ip_mc_del1_src(pmc, sfmode, &psfsrc[j]);
 	} else if (isexclude != (pmc->sfcount[MCAST_EXCLUDE] != 0)) {
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index f5e2bda..ccee270 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -108,9 +108,6 @@
 		       icsk->icsk_ca_ops->name);
 	}
 
-	if ((ext & (1 << (INET_DIAG_TOS - 1))) && (sk->sk_family != AF_INET6))
-		RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos);
-
 	r->idiag_family = sk->sk_family;
 	r->idiag_state = sk->sk_state;
 	r->idiag_timer = 0;
@@ -125,16 +122,23 @@
 	r->id.idiag_src[0] = inet->inet_rcv_saddr;
 	r->id.idiag_dst[0] = inet->inet_daddr;
 
+	/* IPv6 dual-stack sockets use inet->tos for IPv4 connections,
+	 * hence this needs to be included regardless of socket family.
+	 */
+	if (ext & (1 << (INET_DIAG_TOS - 1)))
+		RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos);
+
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
 	if (r->idiag_family == AF_INET6) {
 		const struct ipv6_pinfo *np = inet6_sk(sk);
 
+		if (ext & (1 << (INET_DIAG_TCLASS - 1)))
+			RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass);
+
 		ipv6_addr_copy((struct in6_addr *)r->id.idiag_src,
 			       &np->rcv_saddr);
 		ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst,
 			       &np->daddr);
-		if (ext & (1 << (INET_DIAG_TOS - 1)))
-			RTA_PUT_U8(skb, INET_DIAG_TOS, np->tclass);
 	}
 #endif
 
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 44d65d5..89168c6 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/kmemcheck.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/inet_hashtables.h>
 #include <net/inet_timewait_sock.h>
 #include <net/ip.h>
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 3b34d1c..29a07b6 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -84,7 +84,7 @@
 
 	rt = skb_rtable(skb);
 
-	if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway)
+	if (opt->is_strictroute && opt->nexthop != rt->rt_gateway)
 		goto sr_failed;
 
 	if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) &&
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index ec93335..1e60f76 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -568,12 +568,13 @@
 		     ) {
 			if (srrptr + 3 > srrspace)
 				break;
-			if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0)
+			if (memcmp(&opt->nexthop, &optptr[srrptr-1], 4) == 0)
 				break;
 		}
 		if (srrptr + 3 <= srrspace) {
 			opt->is_changed = 1;
 			ip_rt_get_source(&optptr[srrptr-1], skb, rt);
+			ip_hdr(skb)->daddr = opt->nexthop;
 			optptr[2] = srrptr+4;
 		} else if (net_ratelimit())
 			printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");
@@ -640,6 +641,7 @@
 	}
 	if (srrptr <= srrspace) {
 		opt->srr_is_hit = 1;
+		opt->nexthop = nexthop;
 		opt->is_changed = 1;
 	}
 	return 0;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 472a8c4..0da2afc 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -54,6 +54,7 @@
 #include <linux/delay.h>
 #include <linux/nfs_fs.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/arp.h>
 #include <net/ip.h>
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 6164e98..76a7f07 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -61,6 +61,7 @@
 #include <linux/if_arp.h>
 #include <linux/netfilter_ipv4.h>
 #include <linux/compat.h>
+#include <linux/export.h>
 #include <net/ipip.h>
 #include <net/checksum.h>
 #include <net/netlink.h>
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index 929b27b..4f47e06 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -5,6 +5,7 @@
 #include <linux/ip.h>
 #include <linux/skbuff.h>
 #include <linux/gfp.h>
+#include <linux/export.h>
 #include <net/route.h>
 #include <net/xfrm.h>
 #include <net/ip.h>
@@ -63,7 +64,8 @@
 	/* Change in oif may mean change in hh_len. */
 	hh_len = skb_dst(skb)->dev->hard_header_len;
 	if (skb_headroom(skb) < hh_len &&
-	    pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
+	    pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)),
+				0, GFP_ATOMIC))
 		return -1;
 
 	return 0;
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 1dfc18a..f19f218 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -325,7 +325,6 @@
 # raw + specific targets
 config IP_NF_RAW
 	tristate  'raw table support (required for NOTRACK/TRACE)'
-	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to iptables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index db8d22d..a639967 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -395,7 +395,6 @@
 			config = clusterip_config_init(cipinfo,
 							e->ip.dst.s_addr, dev);
 			if (!config) {
-				pr_info("cannot allocate config\n");
 				dev_put(dev);
 				return -ENOMEM;
 			}
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index 446e0f4..b550815 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -135,10 +135,8 @@
 	 * due to slab allocator restrictions */
 
 	n = max(size, nlbufsiz);
-	skb = alloc_skb(n, GFP_ATOMIC);
+	skb = alloc_skb(n, GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
-		pr_debug("cannot alloc whole buffer %ub!\n", n);
-
 		if (n > size) {
 			/* try to allocate only as much as we need for
 			 * current packet */
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
index 5585980..9682b36 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
@@ -21,6 +21,7 @@
 #include <net/netfilter/nf_conntrack_expect.h>
 #include <net/netfilter/nf_conntrack_acct.h>
 #include <linux/rculist_nulls.h>
+#include <linux/export.h>
 
 struct ct_iter_state {
 	struct seq_net_private p;
diff --git a/net/ipv4/netfilter/nf_nat_proto_common.c b/net/ipv4/netfilter/nf_nat_proto_common.c
index f52d41e..a3d9976 100644
--- a/net/ipv4/netfilter/nf_nat_proto_common.c
+++ b/net/ipv4/netfilter/nf_nat_proto_common.c
@@ -12,6 +12,7 @@
 #include <linux/ip.h>
 
 #include <linux/netfilter.h>
+#include <linux/export.h>
 #include <net/secure_seq.h>
 #include <net/netfilter/nf_nat.h>
 #include <net/netfilter/nf_nat_core.h>
diff --git a/net/ipv4/netfilter/nf_nat_proto_icmp.c b/net/ipv4/netfilter/nf_nat_proto_icmp.c
index 5744c3e..9f4dc12 100644
--- a/net/ipv4/netfilter/nf_nat_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_icmp.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/ip.h>
 #include <linux/icmp.h>
 
diff --git a/net/ipv4/netfilter/nf_nat_proto_sctp.c b/net/ipv4/netfilter/nf_nat_proto_sctp.c
index 756331d..bd5a80a 100644
--- a/net/ipv4/netfilter/nf_nat_proto_sctp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_sctp.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/ip.h>
 #include <linux/sctp.h>
+#include <linux/module.h>
 #include <net/sctp/checksum.h>
 
 #include <net/netfilter/nf_nat_protocol.h>
diff --git a/net/ipv4/netfilter/nf_nat_proto_tcp.c b/net/ipv4/netfilter/nf_nat_proto_tcp.c
index aa460a5..0d67bb8 100644
--- a/net/ipv4/netfilter/nf_nat_proto_tcp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_tcp.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
 
diff --git a/net/ipv4/netfilter/nf_nat_proto_udp.c b/net/ipv4/netfilter/nf_nat_proto_udp.c
index dfe65c7..0b1b860 100644
--- a/net/ipv4/netfilter/nf_nat_proto_udp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_udp.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/ip.h>
 #include <linux/udp.h>
diff --git a/net/ipv4/netfilter/nf_nat_proto_udplite.c b/net/ipv4/netfilter/nf_nat_proto_udplite.c
index 3cc8c8a..f83ef23 100644
--- a/net/ipv4/netfilter/nf_nat_proto_udplite.c
+++ b/net/ipv4/netfilter/nf_nat_proto_udplite.c
@@ -13,6 +13,7 @@
 #include <linux/udp.h>
 
 #include <linux/netfilter.h>
+#include <linux/module.h>
 #include <net/netfilter/nf_nat.h>
 #include <net/netfilter/nf_nat_protocol.h>
 
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index d1cb412..2133c30 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -400,11 +400,8 @@
 	*len = 0;
 
 	*octets = kmalloc(eoc - ctx->pointer, GFP_ATOMIC);
-	if (*octets == NULL) {
-		if (net_ratelimit())
-			pr_notice("OOM in bsalg (%d)\n", __LINE__);
+	if (*octets == NULL)
 		return 0;
-	}
 
 	ptr = *octets;
 	while (ctx->pointer < eoc) {
@@ -451,11 +448,8 @@
 		return 0;
 
 	*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
-	if (*oid == NULL) {
-		if (net_ratelimit())
-			pr_notice("OOM in bsalg (%d)\n", __LINE__);
+	if (*oid == NULL)
 		return 0;
-	}
 
 	optr = *oid;
 
@@ -728,8 +722,6 @@
 		*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
 		if (*obj == NULL) {
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		(*obj)->syntax.l[0] = l;
@@ -744,8 +736,6 @@
 		if (*obj == NULL) {
 			kfree(p);
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		memcpy((*obj)->syntax.c, p, len);
@@ -759,8 +749,6 @@
 		*obj = kmalloc(sizeof(struct snmp_object), GFP_ATOMIC);
 		if (*obj == NULL) {
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		if (!asn1_null_decode(ctx, end)) {
@@ -780,8 +768,6 @@
 		if (*obj == NULL) {
 			kfree(lp);
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		memcpy((*obj)->syntax.ul, lp, len);
@@ -801,8 +787,6 @@
 		if (*obj == NULL) {
 			kfree(p);
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		memcpy((*obj)->syntax.uc, p, len);
@@ -819,8 +803,6 @@
 		*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
 		if (*obj == NULL) {
 			kfree(id);
-			if (net_ratelimit())
-				pr_notice("OOM in bsalg (%d)\n", __LINE__);
 			return 0;
 		}
 		(*obj)->syntax.ul[0] = ul;
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 39b403f..43d4c3b 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -39,6 +39,7 @@
 #include <net/protocol.h>
 #include <linux/skbuff.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/ping.h>
 #include <net/udp.h>
@@ -338,7 +339,6 @@
 	sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
 			    ntohs(icmph->un.echo.id), skb->dev->ifindex);
 	if (sk == NULL) {
-		ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
 		pr_debug("no socket, dropping\n");
 		return;	/* No socket for error */
 	}
@@ -678,7 +678,6 @@
 	pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
 		inet_sk(sk), inet_sk(sk)->inet_num, skb);
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
 		kfree_skb(skb);
 		pr_debug("ping_queue_rcv_skb -> failed\n");
 		return -1;
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 4bfad5d..466ea8b 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -42,6 +42,7 @@
 #include <linux/inetdevice.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/raw.h>
 
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 61714bd..007e2eb 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -48,6 +48,7 @@
 #include <linux/errno.h>
 #include <linux/aio.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/sockios.h>
 #include <linux/socket.h>
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 155138d..ca5e237 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -131,6 +131,7 @@
 static int ip_rt_min_pmtu __read_mostly		= 512 + 20 + 20;
 static int ip_rt_min_advmss __read_mostly	= 256;
 static int rt_chain_length_max __read_mostly	= 20;
+static int redirect_genid;
 
 /*
  *	Interface to generic destination cache.
@@ -138,7 +139,7 @@
 
 static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie);
 static unsigned int	 ipv4_default_advmss(const struct dst_entry *dst);
-static unsigned int	 ipv4_default_mtu(const struct dst_entry *dst);
+static unsigned int	 ipv4_mtu(const struct dst_entry *dst);
 static void		 ipv4_dst_destroy(struct dst_entry *dst);
 static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst);
 static void		 ipv4_link_failure(struct sk_buff *skb);
@@ -193,7 +194,7 @@
 	.gc =			rt_garbage_collect,
 	.check =		ipv4_dst_check,
 	.default_advmss =	ipv4_default_advmss,
-	.default_mtu =		ipv4_default_mtu,
+	.mtu =			ipv4_mtu,
 	.cow_metrics =		ipv4_cow_metrics,
 	.destroy =		ipv4_dst_destroy,
 	.ifdown =		ipv4_dst_ifdown,
@@ -416,9 +417,13 @@
 	else {
 		struct rtable *r = v;
 		struct neighbour *n;
-		int len;
+		int len, HHUptod;
 
+		rcu_read_lock();
 		n = dst_get_neighbour(&r->dst);
+		HHUptod = (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0;
+		rcu_read_unlock();
+
 		seq_printf(seq, "%s\t%08X\t%08X\t%8X\t%d\t%u\t%d\t"
 			      "%08X\t%d\t%u\t%u\t%02X\t%d\t%1d\t%08X%n",
 			r->dst.dev ? r->dst.dev->name : "*",
@@ -432,7 +437,7 @@
 			      dst_metric(&r->dst, RTAX_RTTVAR)),
 			r->rt_key_tos,
 			-1,
-			(n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0,
+			HHUptod,
 			r->rt_spec_dst, &len);
 
 		seq_printf(seq, "%*s\n", 127 - len, "");
@@ -837,6 +842,7 @@
 
 	get_random_bytes(&shuffle, sizeof(shuffle));
 	atomic_add(shuffle + 1U, &net->ipv4.rt_genid);
+	redirect_genid++;
 }
 
 /*
@@ -1304,16 +1310,42 @@
 	spin_unlock_bh(rt_hash_lock_addr(hash));
 }
 
+static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+{
+	struct rtable *rt = (struct rtable *) dst;
+	__be32 orig_gw = rt->rt_gateway;
+	struct neighbour *n, *old_n;
+
+	dst_confirm(&rt->dst);
+
+	rt->rt_gateway = peer->redirect_learned.a4;
+
+	n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
+	if (IS_ERR(n))
+		return PTR_ERR(n);
+	old_n = xchg(&rt->dst._neighbour, n);
+	if (old_n)
+		neigh_release(old_n);
+	if (!n || !(n->nud_state & NUD_VALID)) {
+		if (n)
+			neigh_event_send(n, NULL);
+		rt->rt_gateway = orig_gw;
+		return -EAGAIN;
+	} else {
+		rt->rt_flags |= RTCF_REDIRECTED;
+		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
+	}
+	return 0;
+}
+
 /* called in rcu_read_lock() section */
 void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 		    __be32 saddr, struct net_device *dev)
 {
 	int s, i;
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
-	struct rtable *rt;
 	__be32 skeys[2] = { saddr, 0 };
 	int    ikeys[2] = { dev->ifindex, 0 };
-	struct flowi4 fl4;
 	struct inet_peer *peer;
 	struct net *net;
 
@@ -1336,33 +1368,44 @@
 			goto reject_redirect;
 	}
 
-	memset(&fl4, 0, sizeof(fl4));
-	fl4.daddr = daddr;
 	for (s = 0; s < 2; s++) {
 		for (i = 0; i < 2; i++) {
-			fl4.flowi4_oif = ikeys[i];
-			fl4.saddr = skeys[s];
-			rt = __ip_route_output_key(net, &fl4);
-			if (IS_ERR(rt))
-				continue;
+			unsigned int hash;
+			struct rtable __rcu **rthp;
+			struct rtable *rt;
 
-			if (rt->dst.error || rt->dst.dev != dev ||
-			    rt->rt_gateway != old_gw) {
-				ip_rt_put(rt);
-				continue;
+			hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net));
+
+			rthp = &rt_hash_table[hash].chain;
+
+			while ((rt = rcu_dereference(*rthp)) != NULL) {
+				rthp = &rt->dst.rt_next;
+
+				if (rt->rt_key_dst != daddr ||
+				    rt->rt_key_src != skeys[s] ||
+				    rt->rt_oif != ikeys[i] ||
+				    rt_is_input_route(rt) ||
+				    rt_is_expired(rt) ||
+				    !net_eq(dev_net(rt->dst.dev), net) ||
+				    rt->dst.error ||
+				    rt->dst.dev != dev ||
+				    rt->rt_gateway != old_gw)
+					continue;
+
+				if (!rt->peer)
+					rt_bind_peer(rt, rt->rt_dst, 1);
+
+				peer = rt->peer;
+				if (peer) {
+					if (peer->redirect_learned.a4 != new_gw ||
+					    peer->redirect_genid != redirect_genid) {
+						peer->redirect_learned.a4 = new_gw;
+						peer->redirect_genid = redirect_genid;
+						atomic_inc(&__rt_peer_genid);
+					}
+					check_peer_redir(&rt->dst, peer);
+				}
 			}
-
-			if (!rt->peer)
-				rt_bind_peer(rt, rt->rt_dst, 1);
-
-			peer = rt->peer;
-			if (peer) {
-				peer->redirect_learned.a4 = new_gw;
-				atomic_inc(&__rt_peer_genid);
-			}
-
-			ip_rt_put(rt);
-			return;
 		}
 	}
 	return;
@@ -1649,40 +1692,9 @@
 	}
 }
 
-static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+
+static struct rtable *ipv4_validate_peer(struct rtable *rt)
 {
-	struct rtable *rt = (struct rtable *) dst;
-	__be32 orig_gw = rt->rt_gateway;
-	struct neighbour *n, *old_n;
-
-	dst_confirm(&rt->dst);
-
-	rt->rt_gateway = peer->redirect_learned.a4;
-
-	n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
-	if (IS_ERR(n))
-		return PTR_ERR(n);
-	old_n = xchg(&rt->dst._neighbour, n);
-	if (old_n)
-		neigh_release(old_n);
-	if (!n || !(n->nud_state & NUD_VALID)) {
-		if (n)
-			neigh_event_send(n, NULL);
-		rt->rt_gateway = orig_gw;
-		return -EAGAIN;
-	} else {
-		rt->rt_flags |= RTCF_REDIRECTED;
-		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
-	}
-	return 0;
-}
-
-static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
-{
-	struct rtable *rt = (struct rtable *) dst;
-
-	if (rt_is_expired(rt))
-		return NULL;
 	if (rt->rt_peer_genid != rt_peer_genid()) {
 		struct inet_peer *peer;
 
@@ -1691,17 +1703,29 @@
 
 		peer = rt->peer;
 		if (peer) {
-			check_peer_pmtu(dst, peer);
+			check_peer_pmtu(&rt->dst, peer);
 
+			if (peer->redirect_genid != redirect_genid)
+				peer->redirect_learned.a4 = 0;
 			if (peer->redirect_learned.a4 &&
 			    peer->redirect_learned.a4 != rt->rt_gateway) {
-				if (check_peer_redir(dst, peer))
+				if (check_peer_redir(&rt->dst, peer))
 					return NULL;
 			}
 		}
 
 		rt->rt_peer_genid = rt_peer_genid();
 	}
+	return rt;
+}
+
+static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
+{
+	struct rtable *rt = (struct rtable *) dst;
+
+	if (rt_is_expired(rt))
+		return NULL;
+	dst = (struct dst_entry *) ipv4_validate_peer(rt);
 	return dst;
 }
 
@@ -1806,12 +1830,17 @@
 	return advmss;
 }
 
-static unsigned int ipv4_default_mtu(const struct dst_entry *dst)
+static unsigned int ipv4_mtu(const struct dst_entry *dst)
 {
-	unsigned int mtu = dst->dev->mtu;
+	const struct rtable *rt = (const struct rtable *) dst;
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	if (mtu && rt_is_output_route(rt))
+		return mtu;
+
+	mtu = dst->dev->mtu;
 
 	if (unlikely(dst_metric_locked(dst, RTAX_MTU))) {
-		const struct rtable *rt = (const struct rtable *) dst;
 
 		if (rt->rt_gateway != rt->rt_dst && mtu > 576)
 			mtu = 576;
@@ -1844,6 +1873,8 @@
 		dst_init_metrics(&rt->dst, peer->metrics, false);
 
 		check_peer_pmtu(&rt->dst, peer);
+		if (peer->redirect_genid != redirect_genid)
+			peer->redirect_learned.a4 = 0;
 		if (peer->redirect_learned.a4 &&
 		    peer->redirect_learned.a4 != rt->rt_gateway) {
 			rt->rt_gateway = peer->redirect_learned.a4;
@@ -2349,6 +2380,9 @@
 		    rth->rt_mark == skb->mark &&
 		    net_eq(dev_net(rth->dst.dev), net) &&
 		    !rt_is_expired(rth)) {
+			rth = ipv4_validate_peer(rth);
+			if (!rth)
+				continue;
 			if (noref) {
 				dst_use_noref(&rth->dst, jiffies);
 				skb_dst_set_noref(skb, &rth->dst);
@@ -2724,6 +2758,9 @@
 			    (IPTOS_RT_MASK | RTO_ONLINK)) &&
 		    net_eq(dev_net(rth->dst.dev), net) &&
 		    !rt_is_expired(rth)) {
+			rth = ipv4_validate_peer(rth);
+			if (!rth)
+				continue;
 			dst_use(&rth->dst, jiffies);
 			RT_CACHE_STAT_INC(out_hit);
 			rcu_read_unlock_bh();
@@ -2747,9 +2784,11 @@
 	return NULL;
 }
 
-static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst)
+static unsigned int ipv4_blackhole_mtu(const struct dst_entry *dst)
 {
-	return 0;
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	return mtu ? : dst->dev->mtu;
 }
 
 static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu)
@@ -2767,7 +2806,7 @@
 	.protocol		=	cpu_to_be16(ETH_P_IP),
 	.destroy		=	ipv4_dst_destroy,
 	.check			=	ipv4_blackhole_dst_check,
-	.default_mtu		=	ipv4_blackhole_default_mtu,
+	.mtu			=	ipv4_blackhole_mtu,
 	.default_advmss		=	ipv4_default_advmss,
 	.update_pmtu		=	ipv4_rt_blackhole_update_pmtu,
 	.cow_metrics		=	ipv4_rt_blackhole_cow_metrics,
@@ -2845,7 +2884,7 @@
 	struct rtable *rt = skb_rtable(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
-	long expires = 0;
+	unsigned long expires = 0;
 	const struct inet_peer *peer = rt->peer;
 	u32 id = 0, ts = 0, tsage = 0, error;
 
@@ -2902,8 +2941,12 @@
 			tsage = get_seconds() - peer->tcp_ts_stamp;
 		}
 		expires = ACCESS_ONCE(peer->pmtu_expires);
-		if (expires)
-			expires -= jiffies;
+		if (expires) {
+			if (time_before(jiffies, expires))
+				expires -= jiffies;
+			else
+				expires = 0;
+		}
 	}
 
 	if (rt_is_input_route(rt)) {
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index d7b89b1..90f6544 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -15,6 +15,7 @@
 #include <linux/random.h>
 #include <linux/cryptohash.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <net/tcp.h>
 #include <net/route.h>
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 0ea10ee..a9db4b1 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1510,6 +1510,8 @@
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
 	return NULL;
 put_and_exit:
+	tcp_clear_xmit_timers(newsk);
+	bh_unlock_sock(newsk);
 	sock_put(newsk);
 	goto exit;
 }
@@ -2339,7 +2341,7 @@
 	}
 }
 
-static int tcp_seq_open(struct inode *inode, struct file *file)
+int tcp_seq_open(struct inode *inode, struct file *file)
 {
 	struct tcp_seq_afinfo *afinfo = PDE(inode)->data;
 	struct tcp_iter_state *s;
@@ -2355,23 +2357,19 @@
 	s->last_pos 		= 0;
 	return 0;
 }
+EXPORT_SYMBOL(tcp_seq_open);
 
 int tcp_proc_register(struct net *net, struct tcp_seq_afinfo *afinfo)
 {
 	int rc = 0;
 	struct proc_dir_entry *p;
 
-	afinfo->seq_fops.open		= tcp_seq_open;
-	afinfo->seq_fops.read		= seq_read;
-	afinfo->seq_fops.llseek		= seq_lseek;
-	afinfo->seq_fops.release	= seq_release_net;
-
 	afinfo->seq_ops.start		= tcp_seq_start;
 	afinfo->seq_ops.next		= tcp_seq_next;
 	afinfo->seq_ops.stop		= tcp_seq_stop;
 
 	p = proc_create_data(afinfo->name, S_IRUGO, net->proc_net,
-			     &afinfo->seq_fops, afinfo);
+			     afinfo->seq_fops, afinfo);
 	if (!p)
 		rc = -ENOMEM;
 	return rc;
@@ -2520,12 +2518,18 @@
 	return 0;
 }
 
+static const struct file_operations tcp_afinfo_seq_fops = {
+	.owner   = THIS_MODULE,
+	.open    = tcp_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release_net
+};
+
 static struct tcp_seq_afinfo tcp4_seq_afinfo = {
 	.name		= "tcp",
 	.family		= AF_INET,
-	.seq_fops	= {
-		.owner		= THIS_MODULE,
-	},
+	.seq_fops	= &tcp_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= tcp4_seq_show,
 	},
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 980b98f..63170e29 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1382,7 +1382,7 @@
 /* Return 0, if packet can be sent now without violation Nagle's rules:
  * 1. It is full sized.
  * 2. Or it contains FIN. (already checked by caller)
- * 3. Or TCP_NODELAY was set.
+ * 3. Or TCP_CORK is not set, and TCP_NODELAY is set.
  * 4. Or TCP_CORK is not set, and all sent packets are ACKed.
  *    With Minshall's modification: all sent small packets are ACKed.
  */
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index ebaa96b..5a65eea 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1164,7 +1164,7 @@
 	struct inet_sock *inet = inet_sk(sk);
 	struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
 	struct sk_buff *skb;
-	unsigned int ulen;
+	unsigned int ulen, copied;
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
@@ -1186,9 +1186,10 @@
 		goto out;
 
 	ulen = skb->len - sizeof(struct udphdr);
-	if (len > ulen)
-		len = ulen;
-	else if (len < ulen)
+	copied = len;
+	if (copied > ulen)
+		copied = ulen;
+	else if (copied < ulen)
 		msg->msg_flags |= MSG_TRUNC;
 
 	/*
@@ -1197,14 +1198,14 @@
 	 * coverage checksum (UDP-Lite), do it before the copy.
 	 */
 
-	if (len < ulen || UDP_SKB_CB(skb)->partial_cov) {
+	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
 		if (udp_lib_checksum_complete(skb))
 			goto csum_copy_err;
 	}
 
 	if (skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
-					      msg->msg_iov, len);
+					      msg->msg_iov, copied);
 	else {
 		err = skb_copy_and_csum_datagram_iovec(skb,
 						       sizeof(struct udphdr),
@@ -1233,7 +1234,7 @@
 	if (inet->cmsg_flags)
 		ip_cmsg_recv(msg, skb);
 
-	err = len;
+	err = copied;
 	if (flags & MSG_TRUNC)
 		err = ulen;
 
@@ -1397,6 +1398,8 @@
 	nf_reset(skb);
 
 	if (up->encap_type) {
+		int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+
 		/*
 		 * This is an encapsulation socket so pass the skb to
 		 * the socket's udp_encap_rcv() hook. Otherwise, just
@@ -1409,11 +1412,11 @@
 		 */
 
 		/* if we're overly short, let UDP handle it */
-		if (skb->len > sizeof(struct udphdr) &&
-		    up->encap_rcv != NULL) {
+		encap_rcv = ACCESS_ONCE(up->encap_rcv);
+		if (skb->len > sizeof(struct udphdr) && encap_rcv != NULL) {
 			int ret;
 
-			ret = (*up->encap_rcv)(sk, skb);
+			ret = encap_rcv(sk, skb);
 			if (ret <= 0) {
 				UDP_INC_STATS_BH(sock_net(sk),
 						 UDP_MIB_INDATAGRAMS,
@@ -2037,7 +2040,7 @@
 		spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
 }
 
-static int udp_seq_open(struct inode *inode, struct file *file)
+int udp_seq_open(struct inode *inode, struct file *file)
 {
 	struct udp_seq_afinfo *afinfo = PDE(inode)->data;
 	struct udp_iter_state *s;
@@ -2053,6 +2056,7 @@
 	s->udp_table		= afinfo->udp_table;
 	return err;
 }
+EXPORT_SYMBOL(udp_seq_open);
 
 /* ------------------------------------------------------------------------ */
 int udp_proc_register(struct net *net, struct udp_seq_afinfo *afinfo)
@@ -2060,17 +2064,12 @@
 	struct proc_dir_entry *p;
 	int rc = 0;
 
-	afinfo->seq_fops.open		= udp_seq_open;
-	afinfo->seq_fops.read		= seq_read;
-	afinfo->seq_fops.llseek		= seq_lseek;
-	afinfo->seq_fops.release	= seq_release_net;
-
 	afinfo->seq_ops.start		= udp_seq_start;
 	afinfo->seq_ops.next		= udp_seq_next;
 	afinfo->seq_ops.stop		= udp_seq_stop;
 
 	p = proc_create_data(afinfo->name, S_IRUGO, net->proc_net,
-			     &afinfo->seq_fops, afinfo);
+			     afinfo->seq_fops, afinfo);
 	if (!p)
 		rc = -ENOMEM;
 	return rc;
@@ -2120,14 +2119,20 @@
 	return 0;
 }
 
+static const struct file_operations udp_afinfo_seq_fops = {
+	.owner    = THIS_MODULE,
+	.open     = udp_seq_open,
+	.read     = seq_read,
+	.llseek   = seq_lseek,
+	.release  = seq_release_net
+};
+
 /* ------------------------------------------------------------------------ */
 static struct udp_seq_afinfo udp4_seq_afinfo = {
 	.name		= "udp",
 	.family		= AF_INET,
 	.udp_table	= &udp_table,
-	.seq_fops	= {
-		.owner	=	THIS_MODULE,
-	},
+	.seq_fops	= &udp_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= udp4_seq_show,
 	},
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index aee9963..12e9499 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -10,6 +10,7 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
+#include <linux/export.h>
 #include "udp_impl.h"
 
 struct udp_table 	udplite_table __read_mostly;
@@ -71,13 +72,20 @@
 };
 
 #ifdef CONFIG_PROC_FS
+
+static const struct file_operations udplite_afinfo_seq_fops = {
+	.owner    = THIS_MODULE,
+	.open     = udp_seq_open,
+	.read     = seq_read,
+	.llseek   = seq_lseek,
+	.release  = seq_release_net
+};
+
 static struct udp_seq_afinfo udplite4_seq_afinfo = {
 	.name		= "udplite",
 	.family		= AF_INET,
 	.udp_table 	= &udplite_table,
-	.seq_fops	= {
-		.owner	=	THIS_MODULE,
-	},
+	.seq_fops	= &udplite_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= udp4_seq_show,
 	},
diff --git a/net/ipv4/xfrm4_state.c b/net/ipv4/xfrm4_state.c
index d9ac0a0..9258e75 100644
--- a/net/ipv4/xfrm4_state.c
+++ b/net/ipv4/xfrm4_state.c
@@ -12,6 +12,7 @@
 #include <linux/pfkeyv2.h>
 #include <linux/ipsec.h>
 #include <linux/netfilter_ipv4.h>
+#include <linux/export.h>
 
 static int xfrm4_init_flags(struct xfrm_state *x)
 {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index d0611a5..cf88df8 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -87,6 +87,7 @@
 
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 /* Set to 3 to get tracing... */
 #define ACONF_DEBUG 2
diff --git a/net/ipv6/addrconf_core.c b/net/ipv6/addrconf_core.c
index 6b03826..399287e 100644
--- a/net/ipv6/addrconf_core.c
+++ b/net/ipv6/addrconf_core.c
@@ -3,6 +3,7 @@
  * not configured or static.
  */
 
+#include <linux/export.h>
 #include <net/ipv6.h>
 
 #define IPV6_ADDR_SCOPE_TYPE(scope)	((scope) << 16)
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index 2195ae6..4c0f894 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -324,8 +324,6 @@
 #endif
 	}
 
-	err = ah->nexthdr;
-
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_output_resume(skb, err);
 }
@@ -466,12 +464,12 @@
 	if (err)
 		goto out;
 
+	err = ah->nexthdr;
+
 	skb->network_header += ah_hlen;
 	memcpy(skb_network_header(skb), work_iph, hdr_len);
 	__skb_pull(skb, ah_hlen + hdr_len);
 	skb_set_transport_header(skb, -hdr_len);
-
-	err = ah->nexthdr;
 out:
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_input_resume(skb, err);
@@ -583,8 +581,6 @@
 		if (err == -EINPROGRESS)
 			goto out;
 
-		if (err == -EBUSY)
-			err = NET_XMIT_DROP;
 		goto out_free;
 	}
 
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 1318de4..bf22a22 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -30,6 +30,7 @@
 #include <linux/in6.h>
 #include <linux/icmpv6.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/dst.h>
 #include <net/sock.h>
diff --git a/net/ipv6/exthdrs_core.c b/net/ipv6/exthdrs_core.c
index 14ed0a9..37f548b 100644
--- a/net/ipv6/exthdrs_core.c
+++ b/net/ipv6/exthdrs_core.c
@@ -2,6 +2,7 @@
  * IPv6 library code, needed by static components when full IPv6 support is
  * not configured or static.
  */
+#include <linux/export.h>
 #include <net/ipv6.h>
 
 /*
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 34d244d..2955715 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/netdevice.h>
+#include <linux/export.h>
 
 #include <net/fib_rules.h>
 #include <net/ipv6.h>
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index fee46d5..1567fb1 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -85,7 +85,7 @@
  * request_sock (formerly open request) hash tables.
  */
 static u32 inet6_synq_hash(const struct in6_addr *raddr, const __be16 rport,
-			   const u32 rnd, const u16 synq_hsize)
+			   const u32 rnd, const u32 synq_hsize)
 {
 	u32 c;
 
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index 5430394..4566dbd 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -21,6 +21,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/net_namespace.h>
 #include <net/sock.h>
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 027c7ff..a46c64e 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -111,6 +111,14 @@
 	    ipv6_addr_loopback(&hdr->daddr))
 		goto err;
 
+	/*
+	 * RFC4291 2.7
+	 * Multicast addresses must not be used as source addresses in IPv6
+	 * packets or appear in any Routing header.
+	 */
+	if (ipv6_addr_is_multicast(&hdr->saddr))
+		goto err;
+
 	skb->transport_header = skb->network_header + sizeof(*hdr);
 	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
 
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index bdc15c9..4e2e9ff 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -289,6 +289,8 @@
 	if ((err = register_netdevice(dev)) < 0)
 		goto failed_free;
 
+	strcpy(t->parms.name, dev->name);
+
 	dev_hold(dev);
 	ip6_tnl_link(ip6n, t);
 	return t;
@@ -1407,7 +1409,6 @@
 	struct ip6_tnl *t = netdev_priv(dev);
 
 	t->dev = dev;
-	strcpy(t->parms.name, dev->name);
 	dev->tstats = alloc_percpu(struct pcpu_tstats);
 	if (!dev->tstats)
 		return -ENOMEM;
@@ -1487,6 +1488,7 @@
 static int __net_init ip6_tnl_init_net(struct net *net)
 {
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+	struct ip6_tnl *t = NULL;
 	int err;
 
 	ip6n->tnls[0] = ip6n->tnls_wc;
@@ -1507,6 +1509,10 @@
 	err = register_netdev(ip6n->fb_tnl_dev);
 	if (err < 0)
 		goto err_register;
+
+	t = netdev_priv(ip6n->fb_tnl_dev);
+
+	strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
 	return 0;
 
 err_register:
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index def0538..449a918 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -51,6 +51,7 @@
 #include <linux/pim.h>
 #include <net/addrconf.h>
 #include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
 #include <net/ip6_checksum.h>
 
 struct mr6_table {
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index c99e3ee..26cb08c 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -503,7 +503,7 @@
 			goto e_inval;
 		if (val > 255 || val < -1)
 			goto e_inval;
-		np->mcast_hops = val;
+		np->mcast_hops = (val == -1 ? IPV6_DEFAULT_MCASTHOPS : val);
 		retv = 0;
 		break;
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 44e5b7f..0cb78d7 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1571,7 +1571,7 @@
 	}
 	if (!rt->rt6i_peer)
 		rt6_bind_peer(rt, 1);
-	if (inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ))
+	if (!inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ))
 		goto release;
 
 	if (dev->addr_len) {
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 30fcee4..db31561 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -3,6 +3,7 @@
 #include <linux/ipv6.h>
 #include <linux/netfilter.h>
 #include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
 #include <net/dst.h>
 #include <net/ipv6.h>
 #include <net/ip6_route.h>
@@ -100,9 +101,16 @@
 		.pinet6 = (struct ipv6_pinfo *) &fake_pinfo,
 	};
 	const void *sk = strict ? &fake_sk : NULL;
+	struct dst_entry *result;
+	int err;
 
-	*dst = ip6_route_output(net, sk, &fl->u.ip6);
-	return (*dst)->error;
+	result = ip6_route_output(net, sk, &fl->u.ip6);
+	err = result->error;
+	if (err)
+		dst_release(result);
+	else
+		*dst = result;
+	return err;
 }
 
 __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index 4484648..f792b34 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -186,7 +186,6 @@
 
 config IP6_NF_RAW
 	tristate  'raw table support (required for TRACE)'
-	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to ip6tables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index e8762c7..38f00b0 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -182,7 +182,6 @@
 	return container_of(q, struct nf_ct_frag6_queue, q);
 
 oom:
-	pr_debug("Can't alloc new queue\n");
 	return NULL;
 }
 
@@ -370,10 +369,10 @@
 		struct sk_buff *clone;
 		int i, plen = 0;
 
-		if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL) {
-			pr_debug("Can't alloc skb\n");
+		clone = alloc_skb(0, GFP_ATOMIC);
+		if (clone == NULL)
 			goto out_oom;
-		}
+
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 18ff5df..1008ce9 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -21,6 +21,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/stddef.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/ip.h>
 #include <net/sock.h>
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 6f7824e..331af3b8 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -61,6 +61,7 @@
 
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 static struct raw_hashinfo raw_v6_hashinfo = {
 	.lock = __RW_LOCK_UNLOCKED(raw_v6_hashinfo.lock),
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index cc22099..dfb164e 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -42,6 +42,7 @@
 #include <linux/jhash.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/sock.h>
 #include <net/snmp.h>
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 57b82dc..3399dd3 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -26,6 +26,7 @@
 
 #include <linux/capability.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/times.h>
 #include <linux/socket.h>
@@ -76,7 +77,7 @@
 				    const struct in6_addr *dest);
 static struct dst_entry	*ip6_dst_check(struct dst_entry *dst, u32 cookie);
 static unsigned int	 ip6_default_advmss(const struct dst_entry *dst);
-static unsigned int	 ip6_default_mtu(const struct dst_entry *dst);
+static unsigned int	 ip6_mtu(const struct dst_entry *dst);
 static struct dst_entry *ip6_negative_advice(struct dst_entry *);
 static void		ip6_dst_destroy(struct dst_entry *);
 static void		ip6_dst_ifdown(struct dst_entry *,
@@ -143,7 +144,7 @@
 	.gc_thresh		=	1024,
 	.check			=	ip6_dst_check,
 	.default_advmss		=	ip6_default_advmss,
-	.default_mtu		=	ip6_default_mtu,
+	.mtu			=	ip6_mtu,
 	.cow_metrics		=	ipv6_cow_metrics,
 	.destroy		=	ip6_dst_destroy,
 	.ifdown			=	ip6_dst_ifdown,
@@ -154,9 +155,11 @@
 	.neigh_lookup		=	ip6_neigh_lookup,
 };
 
-static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst)
+static unsigned int ip6_blackhole_mtu(const struct dst_entry *dst)
 {
-	return 0;
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	return mtu ? : dst->dev->mtu;
 }
 
 static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu)
@@ -174,7 +177,7 @@
 	.protocol		=	cpu_to_be16(ETH_P_IPV6),
 	.destroy		=	ip6_dst_destroy,
 	.check			=	ip6_dst_check,
-	.default_mtu		=	ip6_blackhole_default_mtu,
+	.mtu			=	ip6_blackhole_mtu,
 	.default_advmss		=	ip6_default_advmss,
 	.update_pmtu		=	ip6_rt_blackhole_update_pmtu,
 	.cow_metrics		=	ip6_rt_blackhole_cow_metrics,
@@ -1040,10 +1043,15 @@
 	return mtu;
 }
 
-static unsigned int ip6_default_mtu(const struct dst_entry *dst)
+static unsigned int ip6_mtu(const struct dst_entry *dst)
 {
-	unsigned int mtu = IPV6_MIN_MTU;
 	struct inet6_dev *idev;
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	if (mtu)
+		return mtu;
+
+	mtu = IPV6_MIN_MTU;
 
 	rcu_read_lock();
 	idev = __in6_dev_get(dst->dev);
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 6dcf5e7..166a57c 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -10,6 +10,7 @@
 #include <linux/in6.h>
 #include <linux/ipv6.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/ndisc.h>
 #include <net/ipv6.h>
 #include <net/addrconf.h>
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 10b2b31..2dea4bb 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1255,6 +1255,13 @@
 	if (!want_cookie || tmp_opt.tstamp_ok)
 		TCP_ECN_create_request(req, tcp_hdr(skb));
 
+	treq->iif = sk->sk_bound_dev_if;
+
+	/* So that link locals have meaning */
+	if (!sk->sk_bound_dev_if &&
+	    ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL)
+		treq->iif = inet6_iif(skb);
+
 	if (!isn) {
 		struct inet_peer *peer = NULL;
 
@@ -1264,12 +1271,6 @@
 			atomic_inc(&skb->users);
 			treq->pktopts = skb;
 		}
-		treq->iif = sk->sk_bound_dev_if;
-
-		/* So that link locals have meaning */
-		if (!sk->sk_bound_dev_if &&
-		    ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL)
-			treq->iif = inet6_iif(skb);
 
 		if (want_cookie) {
 			isn = cookie_v6_init_sequence(sk, skb, &req->mss);
@@ -2161,12 +2162,18 @@
 	return 0;
 }
 
+static const struct file_operations tcp6_afinfo_seq_fops = {
+	.owner   = THIS_MODULE,
+	.open    = tcp_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release_net
+};
+
 static struct tcp_seq_afinfo tcp6_seq_afinfo = {
 	.name		= "tcp6",
 	.family		= AF_INET6,
-	.seq_fops	= {
-		.owner		= THIS_MODULE,
-	},
+	.seq_fops	= &tcp6_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= tcp6_seq_show,
 	},
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index f4ca0a5..8c25419 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -340,7 +340,7 @@
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
 	struct sk_buff *skb;
-	unsigned int ulen;
+	unsigned int ulen, copied;
 	int peeked;
 	int err;
 	int is_udplite = IS_UDPLITE(sk);
@@ -363,9 +363,10 @@
 		goto out;
 
 	ulen = skb->len - sizeof(struct udphdr);
-	if (len > ulen)
-		len = ulen;
-	else if (len < ulen)
+	copied = len;
+	if (copied > ulen)
+		copied = ulen;
+	else if (copied < ulen)
 		msg->msg_flags |= MSG_TRUNC;
 
 	is_udp4 = (skb->protocol == htons(ETH_P_IP));
@@ -376,14 +377,14 @@
 	 * coverage checksum (UDP-Lite), do it before the copy.
 	 */
 
-	if (len < ulen || UDP_SKB_CB(skb)->partial_cov) {
+	if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) {
 		if (udp_lib_checksum_complete(skb))
 			goto csum_copy_err;
 	}
 
 	if (skb_csum_unnecessary(skb))
 		err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
-					      msg->msg_iov,len);
+					      msg->msg_iov, copied       );
 	else {
 		err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov);
 		if (err == -EINVAL)
@@ -432,7 +433,7 @@
 			datagram_recv_ctl(sk, msg, skb);
 	}
 
-	err = len;
+	err = copied;
 	if (flags & MSG_TRUNC)
 		err = ulen;
 
@@ -1424,13 +1425,19 @@
 	return 0;
 }
 
+static const struct file_operations udp6_afinfo_seq_fops = {
+	.owner    = THIS_MODULE,
+	.open     = udp_seq_open,
+	.read     = seq_read,
+	.llseek   = seq_lseek,
+	.release  = seq_release_net
+};
+
 static struct udp_seq_afinfo udp6_seq_afinfo = {
 	.name		= "udp6",
 	.family		= AF_INET6,
 	.udp_table	= &udp_table,
-	.seq_fops	= {
-		.owner	=	THIS_MODULE,
-	},
+	.seq_fops	= &udp6_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= udp6_seq_show,
 	},
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 986c4de..1d08e21 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -11,6 +11,7 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
+#include <linux/export.h>
 #include "udp_impl.h"
 
 static int udplitev6_rcv(struct sk_buff *skb)
@@ -93,13 +94,20 @@
 }
 
 #ifdef CONFIG_PROC_FS
+
+static const struct file_operations udplite6_afinfo_seq_fops = {
+	.owner    = THIS_MODULE,
+	.open     = udp_seq_open,
+	.read     = seq_read,
+	.llseek   = seq_lseek,
+	.release  = seq_release_net
+};
+
 static struct udp_seq_afinfo udplite6_seq_afinfo = {
 	.name		= "udplite6",
 	.family		= AF_INET6,
 	.udp_table	= &udplite_table,
-	.seq_fops	= {
-		.owner	=	THIS_MODULE,
-	},
+	.seq_fops	= &udplite6_afinfo_seq_fops,
 	.seq_ops	= {
 		.show		= udp6_seq_show,
 	},
diff --git a/net/ipv6/xfrm6_state.c b/net/ipv6/xfrm6_state.c
index 248f0b2..f2d72b8 100644
--- a/net/ipv6/xfrm6_state.c
+++ b/net/ipv6/xfrm6_state.c
@@ -15,6 +15,7 @@
 #include <linux/pfkeyv2.h>
 #include <linux/ipsec.h>
 #include <linux/netfilter_ipv6.h>
+#include <linux/export.h>
 #include <net/dsfield.h>
 #include <net/ipv6.h>
 #include <net/addrconf.h>
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index 26b5bfc..f8ba30d 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -9,6 +9,7 @@
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/tcp_states.h>
 #include <net/ipx.h>
diff --git a/net/irda/discovery.c b/net/irda/discovery.c
index 36c3f03..b0b56a3 100644
--- a/net/irda/discovery.c
+++ b/net/irda/discovery.c
@@ -35,6 +35,7 @@
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irlmp.h>
diff --git a/net/irda/irda_device.c b/net/irda/irda_device.c
index 3eca35f..14653b8 100644
--- a/net/irda/irda_device.c
+++ b/net/irda/irda_device.c
@@ -42,6 +42,7 @@
 #include <linux/kmod.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <asm/ioctls.h>
 #include <asm/uaccess.h>
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 285ccd6..32e3bb0 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -29,6 +29,7 @@
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
diff --git a/net/irda/qos.c b/net/irda/qos.c
index 4369f7f..798ffd9 100644
--- a/net/irda/qos.c
+++ b/net/irda/qos.c
@@ -30,6 +30,8 @@
  *
  ********************************************************************/
 
+#include <linux/export.h>
+
 #include <asm/byteorder.h>
 
 #include <net/irda/irda.h>
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 34b2dde..89ff8c6 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -397,6 +397,7 @@
 	 * expect to send up next, dequeue it and any other
 	 * in-sequence packets behind it.
 	 */
+start:
 	spin_lock_bh(&session->reorder_q.lock);
 	skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
 		if (time_after(jiffies, L2TP_SKB_CB(skb)->expires)) {
@@ -433,7 +434,7 @@
 		 */
 		spin_unlock_bh(&session->reorder_q.lock);
 		l2tp_recv_dequeue_skb(session, skb);
-		spin_lock_bh(&session->reorder_q.lock);
+		goto start;
 	}
 
 out:
@@ -755,9 +756,6 @@
 		goto error;
 	}
 
-	/* Point to L2TP header */
-	optr = ptr = skb->data;
-
 	/* Trace packet contents, if enabled */
 	if (tunnel->debug & L2TP_MSG_DATA) {
 		length = min(32u, skb->len);
@@ -768,12 +766,15 @@
 
 		offset = 0;
 		do {
-			printk(" %02X", ptr[offset]);
+			printk(" %02X", skb->data[offset]);
 		} while (++offset < length);
 
 		printk("\n");
 	}
 
+	/* Point to L2TP header */
+	optr = ptr = skb->data;
+
 	/* Get L2TP header flags */
 	hdrflags = ntohs(*(__be16 *) ptr);
 
@@ -1071,7 +1072,7 @@
 
 	/* Get routing info from the tunnel socket */
 	skb_dst_drop(skb);
-	skb_dst_set(skb, dst_clone(__sk_dst_get(sk)));
+	skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0)));
 
 	inet = inet_sk(sk);
 	fl = &inet->cork.fl;
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index 9032421..e32cab4 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -13,6 +13,7 @@
  */
 #include <linux/netdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/llc.h>
 #include <net/llc_pdu.h>
diff --git a/net/llc/llc_output.c b/net/llc/llc_output.c
index b38a107..b658cba 100644
--- a/net/llc/llc_output.c
+++ b/net/llc/llc_output.c
@@ -18,6 +18,7 @@
 #include <linux/netdevice.h>
 #include <linux/trdevice.h>
 #include <linux/skbuff.h>
+#include <linux/export.h>
 #include <net/llc.h>
 #include <net/llc_pdu.h>
 
diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c
index 7af1ff2..a1839c0 100644
--- a/net/llc/llc_proc.c
+++ b/net/llc/llc_proc.c
@@ -17,6 +17,7 @@
 #include <linux/proc_fs.h>
 #include <linux/errno.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <net/llc.h>
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 97f3358..93b2434 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -38,6 +38,7 @@
 
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "driver-ops.h"
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 2ac0339..b064e4d 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -15,6 +15,7 @@
 
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "driver-ops.h"
@@ -160,6 +161,12 @@
 		return -ENOENT;
 	}
 
+	/* if we're already stopping ignore any new requests to stop */
+	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		spin_unlock_bh(&sta->lock);
+		return -EALREADY;
+	}
+
 	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
 		/* not even started yet! */
 		ieee80211_assign_tid_tx(sta, tid, NULL);
@@ -168,6 +175,8 @@
 		return 0;
 	}
 
+	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+
 	spin_unlock_bh(&sta->lock);
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -175,8 +184,6 @@
 	       sta->sta.addr, tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
-	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
-
 	del_timer_sync(&tid_tx->addba_resp_timer);
 
 	/*
@@ -186,6 +193,20 @@
 	 */
 	clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
 
+	/*
+	 * There might be a few packets being processed right now (on
+	 * another CPU) that have already gotten past the aggregation
+	 * check when it was still OPERATIONAL and consequently have
+	 * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
+	 * call into the driver at the same time or even before the
+	 * TX paths calls into it, which could confuse the driver.
+	 *
+	 * Wait for all currently running TX paths to finish before
+	 * telling the driver. New packets will not go through since
+	 * the aggregation session is no longer OPERATIONAL.
+	 */
+	synchronize_net();
+
 	tid_tx->stop_initiator = initiator;
 	tid_tx->tx_stop = tx;
 
@@ -756,11 +777,27 @@
 		goto out;
 	}
 
-	del_timer(&tid_tx->addba_resp_timer);
+	del_timer_sync(&tid_tx->addba_resp_timer);
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid);
 #endif
+
+	/*
+	 * addba_resp_timer may have fired before we got here, and
+	 * caused WANT_STOP to be set. If the stop then was already
+	 * processed further, STOPPING might be set.
+	 */
+	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
+	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+		printk(KERN_DEBUG
+		       "got addBA resp for tid %d but we already gave up\n",
+		       tid);
+#endif
+		goto out;
+	}
+
 	/*
 	 * IEEE 802.11-2007 7.3.1.14:
 	 * In an ADDBA Response frame, when the Status Code field
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index ebd7fb1..d06c65f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -832,6 +832,12 @@
 	if (is_multicast_ether_addr(mac))
 		return -EINVAL;
 
+	/* Only TDLS-supporting stations can add TDLS peers */
+	if ((params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) &&
+	    !((wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) &&
+	      sdata->vif.type == NL80211_IFTYPE_STATION))
+		return -ENOTSUPP;
+
 	sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
 	if (!sta)
 		return -ENOMEM;
@@ -841,12 +847,6 @@
 
 	sta_apply_parameters(local, sta, params);
 
-	/* Only TDLS-supporting stations can add TDLS peers */
-	if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) &&
-	    !((wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) &&
-	      sdata->vif.type == NL80211_IFTYPE_STATION))
-		return -ENOTSUPP;
-
 	rate_control_rate_init(sta);
 
 	layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index c5f3417..3110cbd 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -274,9 +274,9 @@
 
 		PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack");
 
-		PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: "
-			     "3839 bytes");
 		PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: "
+			     "3839 bytes");
+		PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: "
 			     "7935 bytes");
 
 		/*
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index f80a35c..f0fb737 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/ieee80211.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "rate.h"
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 4c3d1f5..ea10a51 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -389,6 +389,7 @@
 
 	unsigned long timers_running; /* used for quiesce/restart */
 	bool powersave; /* powersave requested for this iface */
+	bool broken_ap; /* AP is broken -- turn off powersave */
 	enum ieee80211_smps_mode req_smps, /* requested smps mode */
 				 ap_smps, /* smps mode AP thinks we're in */
 				 driver_smps_mode; /* smps mode request */
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 756b157..fb02ea5 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -15,6 +15,7 @@
 #include <linux/rcupdate.h>
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "driver-ops.h"
diff --git a/net/mac80211/led.c b/net/mac80211/led.c
index 1459033..1bf7903 100644
--- a/net/mac80211/led.c
+++ b/net/mac80211/led.c
@@ -9,6 +9,7 @@
 /* just for IFNAMSIZ */
 #include <linux/if.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include "led.h"
 
 void ieee80211_led_rx(struct ieee80211_local *local)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ba2da11..b1b1bb3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -16,10 +16,12 @@
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
+#include <linux/moduleparam.h>
 #include <linux/rtnetlink.h>
 #include <linux/pm_qos.h>
 #include <linux/crc32.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include <asm/unaligned.h>
 
@@ -637,6 +639,9 @@
 	if (!mgd->powersave)
 		return false;
 
+	if (mgd->broken_ap)
+		return false;
+
 	if (!mgd->associated)
 		return false;
 
@@ -1482,6 +1487,7 @@
 	int i, j, err;
 	bool have_higher_than_11mbit = false;
 	u16 ap_ht_cap_flags;
+	int min_rate = INT_MAX, min_rate_index = -1;
 
 	/* AssocResp and ReassocResp have identical structure */
 
@@ -1489,10 +1495,21 @@
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
 
 	if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
-		printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not "
-		       "set\n", sdata->name, aid);
+		printk(KERN_DEBUG
+		       "%s: invalid AID value 0x%x; bits 15:14 not set\n",
+		       sdata->name, aid);
 	aid &= ~(BIT(15) | BIT(14));
 
+	ifmgd->broken_ap = false;
+
+	if (aid == 0 || aid > IEEE80211_MAX_AID) {
+		printk(KERN_DEBUG
+		       "%s: invalid AID value %d (out of range), turn off PS\n",
+		       sdata->name, aid);
+		aid = 0;
+		ifmgd->broken_ap = true;
+	}
+
 	pos = mgmt->u.assoc_resp.variable;
 	ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
 
@@ -1537,6 +1554,10 @@
 				rates |= BIT(j);
 				if (is_basic)
 					basic_rates |= BIT(j);
+				if (rate < min_rate) {
+					min_rate = rate;
+					min_rate_index = j;
+				}
 				break;
 			}
 		}
@@ -1554,11 +1575,25 @@
 				rates |= BIT(j);
 				if (is_basic)
 					basic_rates |= BIT(j);
+				if (rate < min_rate) {
+					min_rate = rate;
+					min_rate_index = j;
+				}
 				break;
 			}
 		}
 	}
 
+	/*
+	 * some buggy APs don't advertise basic_rates. use the lowest
+	 * supported rate instead.
+	 */
+	if (unlikely(!basic_rates) && min_rate_index >= 0) {
+		printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
+		       "Using min supported rate instead.\n", sdata->name);
+		basic_rates = BIT(min_rate_index);
+	}
+
 	sta->sta.supp_rates[wk->chan->band] = rates;
 	sdata->vif.bss_conf.basic_rates = basic_rates;
 
@@ -2253,6 +2288,7 @@
 
 	cancel_work_sync(&ifmgd->request_smps_work);
 
+	cancel_work_sync(&ifmgd->monitor_work);
 	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
@@ -2261,7 +2297,6 @@
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->monitor_work);
 	/* these will just be re-established on connection */
 	del_timer_sync(&ifmgd->conn_mon_timer);
 	del_timer_sync(&ifmgd->bcn_mon_timer);
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 13427b1..3d41441 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -12,6 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "driver-trace.h"
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index ff5c3aa..5a5a776 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "rate.h"
 #include "ieee80211_i.h"
 #include "debugfs.h"
diff --git a/net/mac80211/rc80211_minstrel_debugfs.c b/net/mac80211/rc80211_minstrel_debugfs.c
index a290ad23..d5a5622 100644
--- a/net/mac80211/rc80211_minstrel_debugfs.c
+++ b/net/mac80211/rc80211_minstrel_debugfs.c
@@ -50,6 +50,7 @@
 #include <linux/debugfs.h>
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "rc80211_minstrel.h"
 
diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c
index cefcb5d..e788f76 100644
--- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
@@ -10,6 +10,7 @@
 #include <linux/skbuff.h>
 #include <linux/debugfs.h>
 #include <linux/ieee80211.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "rc80211_minstrel.h"
 #include "rc80211_minstrel_ht.h"
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
index 4851e9e..c97a065 100644
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ b/net/mac80211/rc80211_pid_debugfs.c
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/mac80211.h>
 #include "rate.h"
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index b867bd5..fb123e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -16,6 +16,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rcupdate.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include <net/ieee80211_radiotap.h>
 
@@ -140,8 +141,9 @@
 	pos++;
 
 	/* IEEE80211_RADIOTAP_RATE */
-	if (status->flag & RX_FLAG_HT) {
+	if (!rate || status->flag & RX_FLAG_HT) {
 		/*
+		 * Without rate information don't add it. If we have,
 		 * MCS information is a separate field in radiotap,
 		 * added below. The byte here is needed as padding
 		 * for the channel though, so initialise it to 0.
@@ -162,12 +164,14 @@
 	else if (status->flag & RX_FLAG_HT)
 		put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else if (rate->flags & IEEE80211_RATE_ERP_G)
+	else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
 		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else
+	else if (rate)
 		put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
 				   pos);
+	else
+		put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
 	pos += 2;
 
 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 83a0b05..105436d 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -17,6 +17,7 @@
 #include <linux/pm_qos.h>
 #include <net/sch_generic.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/mac80211.h>
 
 #include "ieee80211_i.h"
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index ce962d2..8eaa746 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1354,12 +1354,12 @@
 			 * Use MoreData flag to indicate whether there are
 			 * more buffered frames for this STA
 			 */
-			if (!more_data)
-				hdr->frame_control &=
-					cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
-			else
+			if (more_data || !skb_queue_empty(&frames))
 				hdr->frame_control |=
 					cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+			else
+				hdr->frame_control &=
+					cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
 
 			if (ieee80211_is_data_qos(hdr->frame_control) ||
 			    ieee80211_is_qos_nullfunc(hdr->frame_control))
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index df643ce..16518f3 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "rate.h"
@@ -259,7 +260,7 @@
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct ieee80211_radiotap_header *rthdr;
 	unsigned char *pos;
-	__le16 txflags;
+	u16 txflags;
 
 	rthdr = (struct ieee80211_radiotap_header *) skb_push(skb, rtap_len);
 
@@ -289,13 +290,13 @@
 	txflags = 0;
 	if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
 	    !is_multicast_ether_addr(hdr->addr1))
-		txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
+		txflags |= IEEE80211_RADIOTAP_F_TX_FAIL;
 
 	if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
 	    (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
-		txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
+		txflags |= IEEE80211_RADIOTAP_F_TX_CTS;
 	else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
-		txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
+		txflags |= IEEE80211_RADIOTAP_F_TX_RTS;
 
 	put_unaligned_le16(txflags, pos);
 	pos += 2;
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index f49d00a..51077a9 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -10,6 +10,7 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/netdevice.h>
+#include <linux/export.h>
 #include <asm/unaligned.h>
 
 #include <net/mac80211.h>
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 48bbb96..1f8b120 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -18,6 +18,7 @@
 #include <linux/etherdevice.h>
 #include <linux/bitmap.h>
 #include <linux/rcupdate.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/ieee80211_radiotap.h>
 #include <net/cfg80211.h>
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 7439d26..eca0fad 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -13,6 +13,7 @@
 
 #include <net/mac80211.h>
 #include <linux/netdevice.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/skbuff.h>
@@ -880,6 +881,8 @@
 	skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
 				     ssid, ssid_len,
 				     buf, buf_len);
+	if (!skb)
+		goto out;
 
 	if (dst) {
 		mgmt = (struct ieee80211_mgmt *) skb->data;
@@ -888,6 +891,8 @@
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
 	kfree(buf);
 
 	return skb;
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index 94472eb..6c53b6d 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -1084,14 +1084,13 @@
 			continue;
 		if (wk->chan != local->tmp_channel)
 			continue;
-		if (ieee80211_work_ct_coexists(wk->chan_type,
-					       local->tmp_channel_type))
+		if (!ieee80211_work_ct_coexists(wk->chan_type,
+						local->tmp_channel_type))
 			continue;
 		remain_off_channel = true;
 	}
 
 	if (!remain_off_channel && local->tmp_channel) {
-		bool on_oper_chan = ieee80211_cfg_on_oper_channel(local);
 		local->tmp_channel = NULL;
 		/* If tmp_channel wasn't operating channel, then
 		 * we need to go back on-channel.
@@ -1101,7 +1100,7 @@
 		 * we still need to do a hardware config.  Currently,
 		 * we cannot be here while scanning, however.
 		 */
-		if (ieee80211_cfg_on_oper_channel(local) && !on_oper_chan)
+		if (!ieee80211_cfg_on_oper_channel(local))
 			ieee80211_hw_config(local, 0);
 
 		/* At the least, we need to disable offchannel_ps,
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 8260b13..d5597b7 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -201,7 +201,6 @@
 
 config NF_CONNTRACK_NETBIOS_NS
 	tristate "NetBIOS name service protocol support"
-	depends on NETFILTER_ADVANCED
 	select NF_CONNTRACK_BROADCAST
 	help
 	  NetBIOS name service requests are sent as broadcast messages from an
@@ -542,7 +541,6 @@
 	tristate  '"NOTRACK" target support'
 	depends on IP_NF_RAW || IP6_NF_RAW
 	depends on NF_CONNTRACK
-	depends on NETFILTER_ADVANCED
 	help
 	  The NOTRACK target allows a select rule to specify
 	  which packets *not* to enter the conntrack/NAT
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 3346829..afca6c7 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -180,17 +180,16 @@
 		if (ret == 0)
 			ret = -EPERM;
 	} else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
-		ret = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
-			       verdict >> NF_VERDICT_QBITS);
-		if (ret < 0) {
-			if (ret == -ECANCELED)
+		int err = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+						verdict >> NF_VERDICT_QBITS);
+		if (err < 0) {
+			if (err == -ECANCELED)
 				goto next_hook;
-			if (ret == -ESRCH &&
+			if (err == -ESRCH &&
 			   (verdict & NF_VERDICT_FLAG_QUEUE_BYPASS))
 				goto next_hook;
 			kfree_skb(skb);
 		}
-		ret = 0;
 	}
 	rcu_read_unlock();
 	return ret;
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index d7e86ef..86137b5 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1699,10 +1699,8 @@
 
 	ip_set_list = kzalloc(sizeof(struct ip_set *) * ip_set_max,
 			      GFP_KERNEL);
-	if (!ip_set_list) {
-		pr_err("ip_set: Unable to create ip_set_list\n");
+	if (!ip_set_list)
 		return -ENOMEM;
-	}
 
 	ret = nfnetlink_subsys_register(&ip_set_netlink_subsys);
 	if (ret != 0) {
diff --git a/net/netfilter/ipset/ip_set_getport.c b/net/netfilter/ipset/ip_set_getport.c
index 757143b..052579f 100644
--- a/net/netfilter/ipset/ip_set_getport.c
+++ b/net/netfilter/ipset/ip_set_getport.c
@@ -17,6 +17,7 @@
 #include <net/ipv6.h>
 
 #include <linux/netfilter/ipset/ip_set_getport.h>
+#include <linux/export.h>
 
 /* We must handle non-linear skbs */
 static bool
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index 6ee10f5..37d667e 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -158,7 +158,7 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipport4_elem data = { };
-	u32 ip, ip_to, p = 0, port, port_to;
+	u32 ip, ip_to = 0, p = 0, port, port_to;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
 	int ret;
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index fb90e34..e69e271 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -162,7 +162,7 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipportip4_elem data = { };
-	u32 ip, ip_to, p = 0, port, port_to;
+	u32 ip, ip_to = 0, p = 0, port, port_to;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
 	int ret;
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index deb3e3d..64199b4 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -184,7 +184,7 @@
 	const struct ip_set_hash *h = set->data;
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct hash_ipportnet4_elem data = { .cidr = HOST_MASK };
-	u32 ip, ip_to, p = 0, port, port_to;
+	u32 ip, ip_to = 0, p = 0, port, port_to;
 	u32 ip2_from = 0, ip2_to, ip2_last, ip2;
 	u32 timeout = h->timeout;
 	bool with_ports = false;
diff --git a/net/netfilter/ipset/pfxlen.c b/net/netfilter/ipset/pfxlen.c
index bd13d66..4f29fa9 100644
--- a/net/netfilter/ipset/pfxlen.c
+++ b/net/netfilter/ipset/pfxlen.c
@@ -1,3 +1,4 @@
+#include <linux/export.h>
 #include <linux/netfilter/ipset/pfxlen.h>
 
 /*
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 4f77bb1..093cc32 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -188,14 +188,13 @@
 }
 
 
-static inline int
+static inline void
 ip_vs_set_state(struct ip_vs_conn *cp, int direction,
 		const struct sk_buff *skb,
 		struct ip_vs_proto_data *pd)
 {
-	if (unlikely(!pd->pp->state_transition))
-		return 0;
-	return pd->pp->state_transition(cp, direction, skb, pd);
+	if (likely(pd->pp->state_transition))
+		pd->pp->state_transition(cp, direction, skb, pd);
 }
 
 static inline int
@@ -530,7 +529,7 @@
 	   a cache_bypass connection entry */
 	ipvs = net_ipvs(net);
 	if (ipvs->sysctl_cache_bypass && svc->fwmark && unicast) {
-		int ret, cs;
+		int ret;
 		struct ip_vs_conn *cp;
 		unsigned int flags = (svc->flags & IP_VS_SVC_F_ONEPACKET &&
 				      iph.protocol == IPPROTO_UDP)?
@@ -557,7 +556,7 @@
 		ip_vs_in_stats(cp, skb);
 
 		/* set state */
-		cs = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
+		ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
 
 		/* transmit the first SYN packet */
 		ret = cp->packet_xmit(skb, cp, pd->pp);
@@ -1490,7 +1489,7 @@
 	struct ip_vs_protocol *pp;
 	struct ip_vs_proto_data *pd;
 	struct ip_vs_conn *cp;
-	int ret, restart, pkts;
+	int ret, pkts;
 	struct netns_ipvs *ipvs;
 
 	/* Already marked as IPVS request or reply? */
@@ -1591,7 +1590,7 @@
 	}
 
 	ip_vs_in_stats(cp, skb);
-	restart = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
+	ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
 	if (cp->packet_xmit)
 		ret = cp->packet_xmit(skb, cp, pp);
 		/* do not touch skb anymore */
@@ -1878,10 +1877,9 @@
 	struct netns_ipvs *ipvs;
 
 	ipvs = net_generic(net, ip_vs_net_id);
-	if (ipvs == NULL) {
-		pr_err("%s(): no memory.\n", __func__);
+	if (ipvs == NULL)
 		return -ENOMEM;
-	}
+
 	/* Hold the beast until a service is registerd */
 	ipvs->enable = 0;
 	ipvs->net = net;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e3be48b..008bf97 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -856,15 +856,12 @@
 	}
 
 	dest = kzalloc(sizeof(struct ip_vs_dest), GFP_KERNEL);
-	if (dest == NULL) {
-		pr_err("%s(): no memory.\n", __func__);
+	if (dest == NULL)
 		return -ENOMEM;
-	}
+
 	dest->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
-	if (!dest->stats.cpustats) {
-		pr_err("%s() alloc_percpu failed\n", __func__);
+	if (!dest->stats.cpustats)
 		goto err_alloc;
-	}
 
 	dest->af = svc->af;
 	dest->protocol = svc->protocol;
@@ -1168,10 +1165,8 @@
 		goto out_err;
 	}
 	svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
-	if (!svc->stats.cpustats) {
-		pr_err("%s() alloc_percpu failed\n", __func__);
+	if (!svc->stats.cpustats)
 		goto out_err;
-	}
 
 	/* I'm the first user of the service */
 	atomic_set(&svc->usecnt, 0);
@@ -3326,10 +3321,8 @@
 	int ret = 0, cmd;
 	int need_full_svc = 0, need_full_dest = 0;
 	struct net *net;
-	struct netns_ipvs *ipvs;
 
 	net = skb_sknet(skb);
-	ipvs = net_ipvs(net);
 	cmd = info->genlhdr->cmd;
 
 	mutex_lock(&__ip_vs_mutex);
@@ -3421,10 +3414,8 @@
 	void *reply;
 	int ret, cmd, reply_cmd;
 	struct net *net;
-	struct netns_ipvs *ipvs;
 
 	net = skb_sknet(skb);
-	ipvs = net_ipvs(net);
 	cmd = info->genlhdr->cmd;
 
 	if (cmd == IPVS_CMD_GET_SERVICE)
@@ -3720,10 +3711,9 @@
 
 	/* procfs stats */
 	ipvs->tot_stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
-	if (!ipvs->tot_stats.cpustats) {
-		pr_err("%s(): alloc_percpu.\n", __func__);
+	if (!ipvs->tot_stats.cpustats)
 		return -ENOMEM;
-	}
+
 	spin_lock_init(&ipvs->tot_stats.lock);
 
 	proc_net_fops_create(net, "ip_vs", 0, &ip_vs_info_fops);
diff --git a/net/netfilter/ipvs/ip_vs_dh.c b/net/netfilter/ipvs/ip_vs_dh.c
index 95fd0d1..1c269e5 100644
--- a/net/netfilter/ipvs/ip_vs_dh.c
+++ b/net/netfilter/ipvs/ip_vs_dh.c
@@ -150,10 +150,9 @@
 	/* allocate the DH table for this service */
 	tbl = kmalloc(sizeof(struct ip_vs_dh_bucket)*IP_VS_DH_TAB_SIZE,
 		      GFP_ATOMIC);
-	if (tbl == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (tbl == NULL)
 		return -ENOMEM;
-	}
+
 	svc->sched_data = tbl;
 	IP_VS_DBG(6, "DH hash table (memory=%Zdbytes) allocated for "
 		  "current service\n",
diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index 4490a32..538d74e 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -52,8 +52,9 @@
  * List of ports (up to IP_VS_APP_MAX_PORTS) to be handled by helper
  * First port is set to the default port.
  */
+static unsigned int ports_count = 1;
 static unsigned short ports[IP_VS_APP_MAX_PORTS] = {21, 0};
-module_param_array(ports, ushort, NULL, 0);
+module_param_array(ports, ushort, &ports_count, 0444);
 MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands");
 
 
@@ -449,7 +450,7 @@
 	if (ret)
 		goto err_exit;
 
-	for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
+	for (i = 0; i < ports_count; i++) {
 		if (!ports[i])
 			continue;
 		ret = register_ip_vs_app_inc(net, app, app->protocol, ports[i]);
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 87e40ea..0f16283 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -202,10 +202,8 @@
 	en = ip_vs_lblc_get(dest->af, tbl, daddr);
 	if (!en) {
 		en = kmalloc(sizeof(*en), GFP_ATOMIC);
-		if (!en) {
-			pr_err("%s(): no memory\n", __func__);
+		if (!en)
 			return NULL;
-		}
 
 		en->af = dest->af;
 		ip_vs_addr_copy(dest->af, &en->addr, daddr);
@@ -345,10 +343,9 @@
 	 *    Allocate the ip_vs_lblc_table for this service
 	 */
 	tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
-	if (tbl == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (tbl == NULL)
 		return -ENOMEM;
-	}
+
 	svc->sched_data = tbl;
 	IP_VS_DBG(6, "LBLC hash table (memory=%Zdbytes) allocated for "
 		  "current service\n", sizeof(*tbl));
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 90f618a..eec797f 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -112,10 +112,8 @@
 	}
 
 	e = kmalloc(sizeof(*e), GFP_ATOMIC);
-	if (e == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (e == NULL)
 		return NULL;
-	}
 
 	atomic_inc(&dest->refcnt);
 	e->dest = dest;
@@ -373,10 +371,8 @@
 	en = ip_vs_lblcr_get(dest->af, tbl, daddr);
 	if (!en) {
 		en = kmalloc(sizeof(*en), GFP_ATOMIC);
-		if (!en) {
-			pr_err("%s(): no memory\n", __func__);
+		if (!en)
 			return NULL;
-		}
 
 		en->af = dest->af;
 		ip_vs_addr_copy(dest->af, &en->addr, daddr);
@@ -516,10 +512,9 @@
 	 *    Allocate the ip_vs_lblcr_table for this service
 	 */
 	tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
-	if (tbl == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (tbl == NULL)
 		return -ENOMEM;
-	}
+
 	svc->sched_data = tbl;
 	IP_VS_DBG(6, "LBLCR hash table (memory=%Zdbytes) allocated for "
 		  "current service\n", sizeof(*tbl));
diff --git a/net/netfilter/ipvs/ip_vs_nfct.c b/net/netfilter/ipvs/ip_vs_nfct.c
index f454c80..022e77e 100644
--- a/net/netfilter/ipvs/ip_vs_nfct.c
+++ b/net/netfilter/ipvs/ip_vs_nfct.c
@@ -127,7 +127,7 @@
 	nf_conntrack_alter_reply(ct, &new_tuple);
 }
 
-int ip_vs_confirm_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp)
+int ip_vs_confirm_conntrack(struct sk_buff *skb)
 {
 	return nf_conntrack_confirm(skb);
 }
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index 52d073c..8531293 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -74,10 +74,9 @@
 	struct ip_vs_proto_data *pd =
 			kzalloc(sizeof(struct ip_vs_proto_data), GFP_ATOMIC);
 
-	if (!pd) {
-		pr_err("%s(): no memory.\n", __func__);
+	if (!pd)
 		return -ENOMEM;
-	}
+
 	pd->pp = pp;	/* For speed issues */
 	pd->next = ipvs->proto_data_table[hash];
 	ipvs->proto_data_table[hash] = pd;
diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c
index d12ed53..1fbf7a2 100644
--- a/net/netfilter/ipvs/ip_vs_proto_sctp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c
@@ -906,7 +906,7 @@
 	return "?";
 }
 
-static inline int
+static inline void
 set_sctp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
 		int direction, const struct sk_buff *skb)
 {
@@ -924,7 +924,7 @@
 	sch = skb_header_pointer(skb, ihl + sizeof(sctp_sctphdr_t),
 				sizeof(_sctpch), &_sctpch);
 	if (sch == NULL)
-		return 0;
+		return;
 
 	chunk_type = sch->type;
 	/*
@@ -993,21 +993,15 @@
 		cp->timeout = pd->timeout_table[cp->state = next_state];
 	else	/* What to do ? */
 		cp->timeout = sctp_timeouts[cp->state = next_state];
-
-	return 1;
 }
 
-static int
+static void
 sctp_state_transition(struct ip_vs_conn *cp, int direction,
 		const struct sk_buff *skb, struct ip_vs_proto_data *pd)
 {
-	int ret = 0;
-
 	spin_lock(&cp->lock);
-	ret = set_sctp_state(pd, cp, direction, skb);
+	set_sctp_state(pd, cp, direction, skb);
 	spin_unlock(&cp->lock);
-
-	return ret;
 }
 
 static inline __u16 sctp_app_hashkey(__be16 port)
diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c
index c0cc341..ef8641f 100644
--- a/net/netfilter/ipvs/ip_vs_proto_tcp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c
@@ -546,7 +546,7 @@
 /*
  *	Handle state transitions
  */
-static int
+static void
 tcp_state_transition(struct ip_vs_conn *cp, int direction,
 		     const struct sk_buff *skb,
 		     struct ip_vs_proto_data *pd)
@@ -561,13 +561,11 @@
 
 	th = skb_header_pointer(skb, ihl, sizeof(_tcph), &_tcph);
 	if (th == NULL)
-		return 0;
+		return;
 
 	spin_lock(&cp->lock);
 	set_tcp_state(pd, cp, direction, th);
 	spin_unlock(&cp->lock);
-
-	return 1;
 }
 
 static inline __u16 tcp_app_hashkey(__be16 port)
diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c
index f1282cb..f4b7262 100644
--- a/net/netfilter/ipvs/ip_vs_proto_udp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_udp.c
@@ -454,18 +454,17 @@
 	return udp_state_name_table[state] ? udp_state_name_table[state] : "?";
 }
 
-static int
+static void
 udp_state_transition(struct ip_vs_conn *cp, int direction,
 		     const struct sk_buff *skb,
 		     struct ip_vs_proto_data *pd)
 {
 	if (unlikely(!pd)) {
 		pr_err("UDP no ns data\n");
-		return 0;
+		return;
 	}
 
 	cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL];
-	return 1;
 }
 
 static void __udp_init(struct net *net, struct ip_vs_proto_data *pd)
diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c
index b5e2556..33815f4 100644
--- a/net/netfilter/ipvs/ip_vs_sh.c
+++ b/net/netfilter/ipvs/ip_vs_sh.c
@@ -147,10 +147,9 @@
 	/* allocate the SH table for this service */
 	tbl = kmalloc(sizeof(struct ip_vs_sh_bucket)*IP_VS_SH_TAB_SIZE,
 		      GFP_ATOMIC);
-	if (tbl == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (tbl == NULL)
 		return -ENOMEM;
-	}
+
 	svc->sched_data = tbl;
 	IP_VS_DBG(6, "SH hash table (memory=%Zdbytes) allocated for "
 		  "current service\n",
diff --git a/net/netfilter/ipvs/ip_vs_wrr.c b/net/netfilter/ipvs/ip_vs_wrr.c
index 1ef41f5..fd0d4e0 100644
--- a/net/netfilter/ipvs/ip_vs_wrr.c
+++ b/net/netfilter/ipvs/ip_vs_wrr.c
@@ -85,10 +85,9 @@
 	 *    Allocate the mark variable for WRR scheduling
 	 */
 	mark = kmalloc(sizeof(struct ip_vs_wrr_mark), GFP_ATOMIC);
-	if (mark == NULL) {
-		pr_err("%s(): no memory\n", __func__);
+	if (mark == NULL)
 		return -ENOMEM;
-	}
+
 	mark->cl = &svc->destinations;
 	mark->cw = 0;
 	mark->mw = ip_vs_wrr_max_weight(svc);
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index ee319a4..aa2d720 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -339,7 +339,7 @@
 								\
 	(skb)->ipvs_property = 1;				\
 	if (unlikely((cp)->flags & IP_VS_CONN_F_NFCT))		\
-		__ret = ip_vs_confirm_conntrack(skb, cp);	\
+		__ret = ip_vs_confirm_conntrack(skb);		\
 	if (__ret == NF_ACCEPT) {				\
 		nf_reset(skb);					\
 		skb_forward_csum(skb);				\
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 5178c69..369df3f 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -12,6 +12,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/moduleparam.h>
+#include <linux/export.h>
 
 #include <net/netfilter/nf_conntrack.h>
 #include <net/netfilter/nf_conntrack_extend.h>
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 5acfaf5..7202b06 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -661,7 +661,6 @@
 	 */
 	ct = kmem_cache_alloc(net->ct.nf_conntrack_cachep, gfp);
 	if (ct == NULL) {
-		pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
 		atomic_dec(&net->ct.count);
 		return ERR_PTR(-ENOMEM);
 	}
@@ -749,10 +748,8 @@
 
 	ct = __nf_conntrack_alloc(net, zone, tuple, &repl_tuple, GFP_ATOMIC,
 				  hash);
-	if (IS_ERR(ct)) {
-		pr_debug("Can't allocate conntrack.\n");
+	if (IS_ERR(ct))
 		return (struct nf_conntrack_tuple_hash *)ct;
-	}
 
 	if (!l4proto->new(ct, skb, dataoff)) {
 		nf_conntrack_free(ct);
diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c
index 3add994..b62c414 100644
--- a/net/netfilter/nf_conntrack_ecache.c
+++ b/net/netfilter/nf_conntrack_ecache.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include <net/netfilter/nf_conntrack.h>
 #include <net/netfilter/nf_conntrack_core.h>
@@ -26,22 +27,17 @@
 
 static DEFINE_MUTEX(nf_ct_ecache_mutex);
 
-struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb __read_mostly;
-EXPORT_SYMBOL_GPL(nf_conntrack_event_cb);
-
-struct nf_exp_event_notifier __rcu *nf_expect_event_cb __read_mostly;
-EXPORT_SYMBOL_GPL(nf_expect_event_cb);
-
 /* deliver cached events and clear cache entry - must be called with locally
  * disabled softirqs */
 void nf_ct_deliver_cached_events(struct nf_conn *ct)
 {
+	struct net *net = nf_ct_net(ct);
 	unsigned long events;
 	struct nf_ct_event_notifier *notify;
 	struct nf_conntrack_ecache *e;
 
 	rcu_read_lock();
-	notify = rcu_dereference(nf_conntrack_event_cb);
+	notify = rcu_dereference(net->ct.nf_conntrack_event_cb);
 	if (notify == NULL)
 		goto out_unlock;
 
@@ -82,19 +78,20 @@
 }
 EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events);
 
-int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new)
+int nf_conntrack_register_notifier(struct net *net,
+				   struct nf_ct_event_notifier *new)
 {
 	int ret = 0;
 	struct nf_ct_event_notifier *notify;
 
 	mutex_lock(&nf_ct_ecache_mutex);
-	notify = rcu_dereference_protected(nf_conntrack_event_cb,
+	notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb,
 					   lockdep_is_held(&nf_ct_ecache_mutex));
 	if (notify != NULL) {
 		ret = -EBUSY;
 		goto out_unlock;
 	}
-	RCU_INIT_POINTER(nf_conntrack_event_cb, new);
+	RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, new);
 	mutex_unlock(&nf_ct_ecache_mutex);
 	return ret;
 
@@ -104,32 +101,34 @@
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier);
 
-void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new)
+void nf_conntrack_unregister_notifier(struct net *net,
+				      struct nf_ct_event_notifier *new)
 {
 	struct nf_ct_event_notifier *notify;
 
 	mutex_lock(&nf_ct_ecache_mutex);
-	notify = rcu_dereference_protected(nf_conntrack_event_cb,
+	notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb,
 					   lockdep_is_held(&nf_ct_ecache_mutex));
 	BUG_ON(notify != new);
-	RCU_INIT_POINTER(nf_conntrack_event_cb, NULL);
+	RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, NULL);
 	mutex_unlock(&nf_ct_ecache_mutex);
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
 
-int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new)
+int nf_ct_expect_register_notifier(struct net *net,
+				   struct nf_exp_event_notifier *new)
 {
 	int ret = 0;
 	struct nf_exp_event_notifier *notify;
 
 	mutex_lock(&nf_ct_ecache_mutex);
-	notify = rcu_dereference_protected(nf_expect_event_cb,
+	notify = rcu_dereference_protected(net->ct.nf_expect_event_cb,
 					   lockdep_is_held(&nf_ct_ecache_mutex));
 	if (notify != NULL) {
 		ret = -EBUSY;
 		goto out_unlock;
 	}
-	RCU_INIT_POINTER(nf_expect_event_cb, new);
+	RCU_INIT_POINTER(net->ct.nf_expect_event_cb, new);
 	mutex_unlock(&nf_ct_ecache_mutex);
 	return ret;
 
@@ -139,15 +138,16 @@
 }
 EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
 
-void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new)
+void nf_ct_expect_unregister_notifier(struct net *net,
+				      struct nf_exp_event_notifier *new)
 {
 	struct nf_exp_event_notifier *notify;
 
 	mutex_lock(&nf_ct_ecache_mutex);
-	notify = rcu_dereference_protected(nf_expect_event_cb,
+	notify = rcu_dereference_protected(net->ct.nf_expect_event_cb,
 					   lockdep_is_held(&nf_ct_ecache_mutex));
 	BUG_ON(notify != new);
-	RCU_INIT_POINTER(nf_expect_event_cb, NULL);
+	RCU_INIT_POINTER(net->ct.nf_expect_event_cb, NULL);
 	mutex_unlock(&nf_ct_ecache_mutex);
 }
 EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index cd1e8e0..340c80d 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -20,6 +20,8 @@
 #include <linux/percpu.h>
 #include <linux/kernel.h>
 #include <linux/jhash.h>
+#include <linux/moduleparam.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 
 #include <net/netfilter/nf_conntrack.h>
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index e58aa9b..ef21b22 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -4,7 +4,7 @@
  * (C) 2001 by Jay Schulist <jschlst@samba.org>
  * (C) 2002-2006 by Harald Welte <laforge@gnumonks.org>
  * (C) 2003 by Patrick Mchardy <kaber@trash.net>
- * (C) 2005-2008 by Pablo Neira Ayuso <pablo@netfilter.org>
+ * (C) 2005-2011 by Pablo Neira Ayuso <pablo@netfilter.org>
  *
  * Initial connection tracking via netlink development funded and
  * generally made possible by Network Robots, Inc. (www.networkrobots.com)
@@ -2163,6 +2163,54 @@
 MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK);
 MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP);
 
+static int __net_init ctnetlink_net_init(struct net *net)
+{
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+	int ret;
+
+	ret = nf_conntrack_register_notifier(net, &ctnl_notifier);
+	if (ret < 0) {
+		pr_err("ctnetlink_init: cannot register notifier.\n");
+		goto err_out;
+	}
+
+	ret = nf_ct_expect_register_notifier(net, &ctnl_notifier_exp);
+	if (ret < 0) {
+		pr_err("ctnetlink_init: cannot expect register notifier.\n");
+		goto err_unreg_notifier;
+	}
+#endif
+	return 0;
+
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+err_unreg_notifier:
+	nf_conntrack_unregister_notifier(net, &ctnl_notifier);
+err_out:
+	return ret;
+#endif
+}
+
+static void ctnetlink_net_exit(struct net *net)
+{
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+	nf_ct_expect_unregister_notifier(net, &ctnl_notifier_exp);
+	nf_conntrack_unregister_notifier(net, &ctnl_notifier);
+#endif
+}
+
+static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list)
+{
+	struct net *net;
+
+	list_for_each_entry(net, net_exit_list, exit_list)
+		ctnetlink_net_exit(net);
+}
+
+static struct pernet_operations ctnetlink_net_ops = {
+	.init		= ctnetlink_net_init,
+	.exit_batch	= ctnetlink_net_exit_batch,
+};
+
 static int __init ctnetlink_init(void)
 {
 	int ret;
@@ -2180,28 +2228,15 @@
 		goto err_unreg_subsys;
 	}
 
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
-	ret = nf_conntrack_register_notifier(&ctnl_notifier);
-	if (ret < 0) {
-		pr_err("ctnetlink_init: cannot register notifier.\n");
+	if (register_pernet_subsys(&ctnetlink_net_ops)) {
+		pr_err("ctnetlink_init: cannot register pernet operations\n");
 		goto err_unreg_exp_subsys;
 	}
 
-	ret = nf_ct_expect_register_notifier(&ctnl_notifier_exp);
-	if (ret < 0) {
-		pr_err("ctnetlink_init: cannot expect register notifier.\n");
-		goto err_unreg_notifier;
-	}
-#endif
-
 	return 0;
 
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
-err_unreg_notifier:
-	nf_conntrack_unregister_notifier(&ctnl_notifier);
 err_unreg_exp_subsys:
 	nfnetlink_subsys_unregister(&ctnl_exp_subsys);
-#endif
 err_unreg_subsys:
 	nfnetlink_subsys_unregister(&ctnl_subsys);
 err_out:
@@ -2213,11 +2248,7 @@
 	pr_info("ctnetlink: unregistering from nfnetlink.\n");
 
 	nf_ct_remove_userspace_expectations();
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
-	nf_ct_expect_unregister_notifier(&ctnl_notifier_exp);
-	nf_conntrack_unregister_notifier(&ctnl_notifier);
-#endif
-
+	unregister_pernet_subsys(&ctnetlink_net_ops);
 	nfnetlink_subsys_unregister(&ctnl_exp_subsys);
 	nfnetlink_subsys_unregister(&ctnl_subsys);
 }
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 2d8158a..66b2c54 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -307,17 +307,14 @@
 	n = max(inst_size, pkt_size);
 	skb = alloc_skb(n, GFP_ATOMIC);
 	if (!skb) {
-		pr_notice("nfnetlink_log: can't alloc whole buffer (%u bytes)\n",
-			inst_size);
-
 		if (n > pkt_size) {
 			/* try to allocate only as much as we need for current
 			 * packet */
 
 			skb = alloc_skb(pkt_size, GFP_ATOMIC);
 			if (!skb)
-				pr_err("nfnetlink_log: can't even alloc %u "
-				       "bytes\n", pkt_size);
+				pr_err("nfnetlink_log: can't even alloc %u bytes\n",
+				       pkt_size);
 		}
 	}
 
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 71441b9..8d987c3 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -14,6 +14,7 @@
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/socket.h>
 #include <linux/net.h>
 #include <linux/proc_fs.h>
diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 3bdd443..f407ebc1 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -122,14 +122,12 @@
 
 	info->timer = kmalloc(sizeof(*info->timer), GFP_KERNEL);
 	if (!info->timer) {
-		pr_debug("couldn't alloc timer\n");
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	info->timer->attr.attr.name = kstrdup(info->label, GFP_KERNEL);
 	if (!info->timer->attr.attr.name) {
-		pr_debug("couldn't alloc attribute name\n");
 		ret = -ENOMEM;
 		goto out_free_timer;
 	}
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 9228ee0d..dfd52ba 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -176,10 +176,7 @@
 		ent = NULL;
 	} else
 		ent = kmem_cache_alloc(hashlimit_cachep, GFP_ATOMIC);
-	if (!ent) {
-		if (net_ratelimit())
-			pr_err("cannot allocate dsthash_ent\n");
-	} else {
+	if (ent) {
 		memcpy(&ent->dst, dst, sizeof(ent->dst));
 		spin_lock_init(&ent->lock);
 
diff --git a/net/netfilter/xt_quota.c b/net/netfilter/xt_quota.c
index 70eb2b4..44c8eb4 100644
--- a/net/netfilter/xt_quota.c
+++ b/net/netfilter/xt_quota.c
@@ -9,6 +9,7 @@
 
 #include <linux/netfilter/x_tables.h>
 #include <linux/netfilter/xt_quota.h>
+#include <linux/module.h>
 
 struct xt_quota_priv {
 	spinlock_t	lock;
diff --git a/net/netfilter/xt_statistic.c b/net/netfilter/xt_statistic.c
index 42ecb71..4fe4fb4 100644
--- a/net/netfilter/xt_statistic.c
+++ b/net/netfilter/xt_statistic.c
@@ -16,6 +16,7 @@
 
 #include <linux/netfilter/xt_statistic.h>
 #include <linux/netfilter/x_tables.h>
+#include <linux/module.h>
 
 struct xt_statistic_priv {
 	atomic_t count;
diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index 9c24de10..824f184 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -111,8 +111,6 @@
 	struct netlbl_domaddr_map *addrmap = NULL;
 	struct netlbl_domaddr4_map *map4 = NULL;
 	struct netlbl_domaddr6_map *map6 = NULL;
-	const struct in_addr *addr4, *mask4;
-	const struct in6_addr *addr6, *mask6;
 
 	entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
 	if (entry == NULL)
@@ -133,9 +131,9 @@
 		INIT_LIST_HEAD(&addrmap->list6);
 
 		switch (family) {
-		case AF_INET:
-			addr4 = addr;
-			mask4 = mask;
+		case AF_INET: {
+			const struct in_addr *addr4 = addr;
+			const struct in_addr *mask4 = mask;
 			map4 = kzalloc(sizeof(*map4), GFP_ATOMIC);
 			if (map4 == NULL)
 				goto cfg_unlbl_map_add_failure;
@@ -148,9 +146,11 @@
 			if (ret_val != 0)
 				goto cfg_unlbl_map_add_failure;
 			break;
-		case AF_INET6:
-			addr6 = addr;
-			mask6 = mask;
+			}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+		case AF_INET6: {
+			const struct in6_addr *addr6 = addr;
+			const struct in6_addr *mask6 = mask;
 			map6 = kzalloc(sizeof(*map6), GFP_ATOMIC);
 			if (map6 == NULL)
 				goto cfg_unlbl_map_add_failure;
@@ -162,11 +162,13 @@
 			map6->list.addr.s6_addr32[3] &= mask6->s6_addr32[3];
 			ipv6_addr_copy(&map6->list.mask, mask6);
 			map6->list.valid = 1;
-			ret_val = netlbl_af4list_add(&map4->list,
-						     &addrmap->list4);
+			ret_val = netlbl_af6list_add(&map6->list,
+						     &addrmap->list6);
 			if (ret_val != 0)
 				goto cfg_unlbl_map_add_failure;
 			break;
+			}
+#endif /* IPv6 */
 		default:
 			goto cfg_unlbl_map_add_failure;
 			break;
@@ -225,9 +227,11 @@
 	case AF_INET:
 		addr_len = sizeof(struct in_addr);
 		break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	case AF_INET6:
 		addr_len = sizeof(struct in6_addr);
 		break;
+#endif /* IPv6 */
 	default:
 		return -EPFNOSUPPORT;
 	}
@@ -266,9 +270,11 @@
 	case AF_INET:
 		addr_len = sizeof(struct in_addr);
 		break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	case AF_INET6:
 		addr_len = sizeof(struct in6_addr);
 		break;
+#endif /* IPv6 */
 	default:
 		return -EPFNOSUPPORT;
 	}
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index cd5ddb2..915a87b 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -37,6 +37,7 @@
 #include <linux/spinlock.h>
 #include <net/netrom.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 static unsigned int nr_neigh_no = 1;
 
diff --git a/net/nfc/af_nfc.c b/net/nfc/af_nfc.c
index e982cef..da67756 100644
--- a/net/nfc/af_nfc.c
+++ b/net/nfc/af_nfc.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/nfc.h>
+#include <linux/module.h>
 
 #include "nfc.h"
 
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 4047e29..3925c657 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/workqueue.h>
 #include <linux/completion.h>
+#include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
 #include <linux/skbuff.h>
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index 9fd652a..ee7b2b3 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -23,6 +23,7 @@
 
 #include <net/tcp_states.h>
 #include <linux/nfc.h>
+#include <linux/export.h>
 
 #include "nfc.h"
 
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 03bb45a..82a6f34 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -335,7 +335,7 @@
 	(((x)->kactive_blk_num < ((x)->knum_blocks-1)) ? \
 	((x)->kactive_blk_num+1) : 0)
 
-static inline struct packet_sock *pkt_sk(struct sock *sk)
+static struct packet_sock *pkt_sk(struct sock *sk)
 {
 	return (struct packet_sock *)sk;
 }
@@ -477,7 +477,7 @@
 	return h.raw;
 }
 
-static inline void *packet_current_frame(struct packet_sock *po,
+static void *packet_current_frame(struct packet_sock *po,
 		struct packet_ring_buffer *rb,
 		int status)
 {
@@ -715,7 +715,7 @@
 	spin_unlock(&po->sk.sk_receive_queue.lock);
 }
 
-static inline void prb_flush_block(struct tpacket_kbdq_core *pkc1,
+static void prb_flush_block(struct tpacket_kbdq_core *pkc1,
 		struct tpacket_block_desc *pbd1, __u32 status)
 {
 	/* Flush everything minus the block header */
@@ -793,7 +793,7 @@
 	pkc1->kactive_blk_num = GET_NEXT_PRB_BLK_NUM(pkc1);
 }
 
-static inline void prb_thaw_queue(struct tpacket_kbdq_core *pkc)
+static void prb_thaw_queue(struct tpacket_kbdq_core *pkc)
 {
 	pkc->reset_pending_on_curr_blk = 0;
 }
@@ -869,7 +869,7 @@
  *         case and __packet_lookup_frame_in_block will check if block-0
  *         is free and can now be re-used.
  */
-static inline void prb_freeze_queue(struct tpacket_kbdq_core *pkc,
+static void prb_freeze_queue(struct tpacket_kbdq_core *pkc,
 				  struct packet_sock *po)
 {
 	pkc->reset_pending_on_curr_blk = 1;
@@ -940,36 +940,36 @@
 	BUG();
 }
 
-static inline int prb_curr_blk_in_use(struct tpacket_kbdq_core *pkc,
+static int prb_curr_blk_in_use(struct tpacket_kbdq_core *pkc,
 				      struct tpacket_block_desc *pbd)
 {
 	return TP_STATUS_USER & BLOCK_STATUS(pbd);
 }
 
-static inline int prb_queue_frozen(struct tpacket_kbdq_core *pkc)
+static int prb_queue_frozen(struct tpacket_kbdq_core *pkc)
 {
 	return pkc->reset_pending_on_curr_blk;
 }
 
-static inline void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
+static void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
 {
 	struct tpacket_kbdq_core *pkc  = GET_PBDQC_FROM_RB(rb);
 	atomic_dec(&pkc->blk_fill_in_prog);
 }
 
-static inline void prb_fill_rxhash(struct tpacket_kbdq_core *pkc,
+static void prb_fill_rxhash(struct tpacket_kbdq_core *pkc,
 			struct tpacket3_hdr *ppd)
 {
 	ppd->hv1.tp_rxhash = skb_get_rxhash(pkc->skb);
 }
 
-static inline void prb_clear_rxhash(struct tpacket_kbdq_core *pkc,
+static void prb_clear_rxhash(struct tpacket_kbdq_core *pkc,
 			struct tpacket3_hdr *ppd)
 {
 	ppd->hv1.tp_rxhash = 0;
 }
 
-static inline void prb_fill_vlan_info(struct tpacket_kbdq_core *pkc,
+static void prb_fill_vlan_info(struct tpacket_kbdq_core *pkc,
 			struct tpacket3_hdr *ppd)
 {
 	if (vlan_tx_tag_present(pkc->skb)) {
@@ -991,7 +991,7 @@
 		prb_clear_rxhash(pkc, ppd);
 }
 
-static inline void prb_fill_curr_block(char *curr,
+static void prb_fill_curr_block(char *curr,
 				struct tpacket_kbdq_core *pkc,
 				struct tpacket_block_desc *pbd,
 				unsigned int len)
@@ -1071,7 +1071,7 @@
 	return NULL;
 }
 
-static inline void *packet_current_rx_frame(struct packet_sock *po,
+static void *packet_current_rx_frame(struct packet_sock *po,
 					    struct sk_buff *skb,
 					    int status, unsigned int len)
 {
@@ -1091,7 +1091,7 @@
 	}
 }
 
-static inline void *prb_lookup_block(struct packet_sock *po,
+static void *prb_lookup_block(struct packet_sock *po,
 				     struct packet_ring_buffer *rb,
 				     unsigned int previous,
 				     int status)
@@ -1104,7 +1104,7 @@
 	return pbd;
 }
 
-static inline int prb_previous_blk_num(struct packet_ring_buffer *rb)
+static int prb_previous_blk_num(struct packet_ring_buffer *rb)
 {
 	unsigned int prev;
 	if (rb->prb_bdqc.kactive_blk_num)
@@ -1115,7 +1115,7 @@
 }
 
 /* Assumes caller has held the rx_queue.lock */
-static inline void *__prb_previous_block(struct packet_sock *po,
+static void *__prb_previous_block(struct packet_sock *po,
 					 struct packet_ring_buffer *rb,
 					 int status)
 {
@@ -1123,7 +1123,7 @@
 	return prb_lookup_block(po, rb, previous, status);
 }
 
-static inline void *packet_previous_rx_frame(struct packet_sock *po,
+static void *packet_previous_rx_frame(struct packet_sock *po,
 					     struct packet_ring_buffer *rb,
 					     int status)
 {
@@ -1133,7 +1133,7 @@
 	return __prb_previous_block(po, rb, status);
 }
 
-static inline void packet_increment_rx_head(struct packet_sock *po,
+static void packet_increment_rx_head(struct packet_sock *po,
 					    struct packet_ring_buffer *rb)
 {
 	switch (po->tp_version) {
@@ -1148,7 +1148,7 @@
 	}
 }
 
-static inline void *packet_previous_frame(struct packet_sock *po,
+static void *packet_previous_frame(struct packet_sock *po,
 		struct packet_ring_buffer *rb,
 		int status)
 {
@@ -1156,7 +1156,7 @@
 	return packet_lookup_frame(po, rb, previous, status);
 }
 
-static inline void packet_increment_head(struct packet_ring_buffer *buff)
+static void packet_increment_head(struct packet_ring_buffer *buff)
 {
 	buff->head = buff->head != buff->frame_max ? buff->head+1 : 0;
 }
@@ -1558,7 +1558,7 @@
 	return err;
 }
 
-static inline unsigned int run_filter(const struct sk_buff *skb,
+static unsigned int run_filter(const struct sk_buff *skb,
 				      const struct sock *sk,
 				      unsigned int res)
 {
@@ -2167,10 +2167,10 @@
 	return err;
 }
 
-static inline struct sk_buff *packet_alloc_skb(struct sock *sk, size_t prepad,
-					       size_t reserve, size_t len,
-					       size_t linear, int noblock,
-					       int *err)
+static struct sk_buff *packet_alloc_skb(struct sock *sk, size_t prepad,
+				        size_t reserve, size_t len,
+				        size_t linear, int noblock,
+				        int *err)
 {
 	struct sk_buff *skb;
 
@@ -3494,7 +3494,7 @@
 	kfree(pg_vec);
 }
 
-static inline char *alloc_one_pg_vec_page(unsigned long order)
+static char *alloc_one_pg_vec_page(unsigned long order)
 {
 	char *buffer = NULL;
 	gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP |
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index 2f03238..bf35b4e 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -30,6 +30,7 @@
 #include <net/sock.h>
 
 #include <linux/phonet.h>
+#include <linux/export.h>
 #include <net/phonet/phonet.h>
 
 static int pn_backlog_rcv(struct sock *sk, struct sk_buff *skb);
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index f17fd84..2ba6e9f 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -30,6 +30,7 @@
 #include <asm/ioctls.h>
 
 #include <linux/phonet.h>
+#include <linux/module.h>
 #include <net/phonet/phonet.h>
 #include <net/phonet/pep.h>
 #include <net/phonet/gprs.h>
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index 676d18d..3f8d0b1 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -31,6 +31,7 @@
 #include <net/tcp_states.h>
 
 #include <linux/phonet.h>
+#include <linux/export.h>
 #include <net/phonet/phonet.h>
 #include <net/phonet/pep.h>
 #include <net/phonet/pn_dev.h>
diff --git a/net/rds/Kconfig b/net/rds/Kconfig
index 4cf6dc7..ec753b3 100644
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
@@ -9,7 +9,6 @@
 
 config RDS_RDMA
 	tristate "RDS over Infiniband and iWARP"
-	select LLIST
 	depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS
 	---help---
 	  Allow RDS to use Infiniband and iWARP as a transport.
diff --git a/net/rds/cong.c b/net/rds/cong.c
index 6daaa49..e5b65ac 100644
--- a/net/rds/cong.c
+++ b/net/rds/cong.c
@@ -34,6 +34,7 @@
 #include <linux/types.h>
 #include <linux/rbtree.h>
 #include <linux/bitops.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/connection.c b/net/rds/connection.c
index 9334d89..9e07c75 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/inet_hashtables.h>
 
 #include "rds.h"
diff --git a/net/rds/ib.c b/net/rds/ib.c
index 3b83086..b4c8b00 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -38,6 +38,7 @@
 #include <linux/if_arp.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "rds.h"
 #include "ib.h"
diff --git a/net/rds/info.c b/net/rds/info.c
index 4fdf1b6..f1c016c 100644
--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -34,6 +34,7 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/iw.c b/net/rds/iw.c
index f747484..7826d46 100644
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -38,6 +38,7 @@
 #include <linux/if_arp.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include "rds.h"
 #include "iw.h"
diff --git a/net/rds/message.c b/net/rds/message.c
index 1fd3d29..f0a4658 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -32,6 +32,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/page.c b/net/rds/page.c
index b82d63e..2499cd1 100644
--- a/net/rds/page.c
+++ b/net/rds/page.c
@@ -33,6 +33,7 @@
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/cpu.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c
index f8760e1..c2be901 100644
--- a/net/rds/rdma_transport.c
+++ b/net/rds/rdma_transport.c
@@ -30,6 +30,7 @@
  * SOFTWARE.
  *
  */
+#include <linux/module.h>
 #include <rdma/rdma_cm.h>
 
 #include "rdma_transport.h"
diff --git a/net/rds/recv.c b/net/rds/recv.c
index 596689e..bc3f8cd 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <linux/in.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/send.c b/net/rds/send.c
index aa57e22..e2d63c5 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -31,11 +31,13 @@
  *
  */
 #include <linux/kernel.h>
+#include <linux/moduleparam.h>
 #include <linux/gfp.h>
 #include <net/sock.h>
 #include <linux/in.h>
 #include <linux/list.h>
 #include <linux/ratelimit.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/stats.c b/net/rds/stats.c
index 10c759c..7be790d 100644
--- a/net/rds/stats.c
+++ b/net/rds/stats.c
@@ -33,6 +33,7 @@
 #include <linux/percpu.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rds/tcp.c b/net/rds/tcp.c
index 8e0a320..edac9ef 100644
--- a/net/rds/tcp.c
+++ b/net/rds/tcp.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/in.h>
+#include <linux/module.h>
 #include <net/tcp.h>
 
 #include "rds.h"
diff --git a/net/rds/threads.c b/net/rds/threads.c
index 0fd90f8..65eaefc 100644
--- a/net/rds/threads.c
+++ b/net/rds/threads.c
@@ -32,6 +32,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/random.h>
+#include <linux/export.h>
 
 #include "rds.h"
 
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
index 1bca6d4..24c55c5 100644
--- a/net/rfkill/input.c
+++ b/net/rfkill/input.c
@@ -15,6 +15,7 @@
 
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/moduleparam.h>
 #include <linux/workqueue.h>
 #include <linux/init.h>
 #include <linux/rfkill.h>
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index d389de1..cd9b7ee 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -36,6 +36,7 @@
 #include <linux/init.h>
 #include <net/rose.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 
 static unsigned int rose_neigh_no = 1;
 
diff --git a/net/rxrpc/ar-output.c b/net/rxrpc/ar-output.c
index 5f22e26..338d793 100644
--- a/net/rxrpc/ar-output.c
+++ b/net/rxrpc/ar-output.c
@@ -13,6 +13,7 @@
 #include <linux/gfp.h>
 #include <linux/skbuff.h>
 #include <linux/circ_buf.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/af_rxrpc.h>
 #include "ar-internal.h"
diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c
index 0c65013..4b48687 100644
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -11,6 +11,7 @@
 
 #include <linux/net.h>
 #include <linux/skbuff.h>
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/af_rxrpc.h>
 #include "ar-internal.h"
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index f2fb67e..93fdf13 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <net/sch_generic.h>
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 9e087d8..7b58230 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -21,6 +21,7 @@
 #include <linux/ipv6.h>
 #include <linux/if_vlan.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <net/pkt_cls.h>
 #include <net/ip.h>
diff --git a/net/sched/sch_mq.c b/net/sched/sch_mq.c
index ec5cbc8..0a4b2f9 100644
--- a/net/sched/sch_mq.c
+++ b/net/sched/sch_mq.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/skbuff.h>
diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index ea17cbe..f88256c 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/skbuff.h>
+#include <linux/module.h>
 #include <net/netlink.h>
 #include <net/pkt_sched.h>
 #include <net/sch_generic.h>
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 6649463..d617161 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -209,8 +209,8 @@
 				 ctl->Plog, ctl->Scell_log,
 				 nla_data(tb[TCA_RED_STAB]));
 
-	if (skb_queue_empty(&sch->q))
-		red_end_of_idle_period(&q->parms);
+	if (!q->qdisc->q.qlen)
+		red_start_of_idle_period(&q->parms);
 
 	sch_tree_unlock(sch);
 	return 0;
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index a3b7120..4f4c52c 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -225,11 +225,11 @@
 
 
 static int
-__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev)
+__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res,
+	       struct net_device *dev, struct netdev_queue *txq,
+	       struct neighbour *mn)
 {
-	struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0);
-	struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc);
-	struct neighbour *mn = dst_get_neighbour(skb_dst(skb));
+	struct teql_sched_data *q = qdisc_priv(txq->qdisc);
 	struct neighbour *n = q->ncache;
 
 	if (mn->tbl == NULL)
@@ -262,17 +262,26 @@
 }
 
 static inline int teql_resolve(struct sk_buff *skb,
-			       struct sk_buff *skb_res, struct net_device *dev)
+			       struct sk_buff *skb_res,
+			       struct net_device *dev,
+			       struct netdev_queue *txq)
 {
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
+	struct dst_entry *dst = skb_dst(skb);
+	struct neighbour *mn;
+	int res;
+
 	if (txq->qdisc == &noop_qdisc)
 		return -ENODEV;
 
-	if (dev->header_ops == NULL ||
-	    skb_dst(skb) == NULL ||
-	    dst_get_neighbour(skb_dst(skb)) == NULL)
+	if (!dev->header_ops || !dst)
 		return 0;
-	return __teql_resolve(skb, skb_res, dev);
+
+	rcu_read_lock();
+	mn = dst_get_neighbour(dst);
+	res = mn ? __teql_resolve(skb, skb_res, dev, txq, mn) : 0;
+	rcu_read_unlock();
+
+	return res;
 }
 
 static netdev_tx_t teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -307,7 +316,7 @@
 			continue;
 		}
 
-		switch (teql_resolve(skb, skb_res, slave)) {
+		switch (teql_resolve(skb, skb_res, slave, slave_txq)) {
 		case 0:
 			if (__netif_tx_trylock(slave_txq)) {
 				unsigned int length = qdisc_pkt_len(skb);
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 865e68f..bf81204 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -82,7 +82,7 @@
 	struct sctp_auth_bytes *key;
 
 	/* Verify that we are not going to overflow INT_MAX */
-	if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes))
+	if (key_len > (INT_MAX - sizeof(struct sctp_auth_bytes)))
 		return NULL;
 
 	/* Allocate the shared key */
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index 05a6ce2..1e2eee8 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -37,6 +37,7 @@
 #include <linux/types.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/export.h>
 #include <net/sctp/sctp.h>
 #include <net/ip.h> /* for snmp_fold_field */
 
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 836aa63..13bf5fc 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -78,6 +78,7 @@
 #include <net/inet_common.h>
 
 #include <linux/socket.h> /* for sa_family_t */
+#include <linux/export.h>
 #include <net/sock.h>
 #include <net/sctp/sctp.h>
 #include <net/sctp/sm.h>
diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
index 4548757..67a655e 100644
--- a/net/sunrpc/addr.c
+++ b/net/sunrpc/addr.c
@@ -19,6 +19,7 @@
 #include <net/ipv6.h>
 #include <linux/sunrpc/clnt.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 
diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c
index 4cb70dc..e50502d 100644
--- a/net/sunrpc/auth_unix.c
+++ b/net/sunrpc/auth_unix.c
@@ -129,6 +129,9 @@
 	for (i = 0; i < groups ; i++)
 		if (cred->uc_gids[i] != GROUP_AT(acred->group_info, i))
 			return 0;
+	if (groups < NFS_NGROUPS &&
+	    cred->uc_gids[groups] != NOGROUP)
+		return 0;
 	return 1;
 }
 
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 91eaa26..3ad435a 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -24,6 +24,7 @@
 #include <linux/tcp.h>
 #include <linux/slab.h>
 #include <linux/sunrpc/xprt.h>
+#include <linux/export.h>
 
 #ifdef RPC_DEBUG
 #define RPCDBG_FACILITY	RPCDBG_TRANS
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index f588b85..8761bf8 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -114,6 +114,9 @@
 static struct rpc_clnt *	rpcb_local_clnt;
 static struct rpc_clnt *	rpcb_local_clnt4;
 
+DEFINE_SPINLOCK(rpcb_clnt_lock);
+unsigned int			rpcb_users;
+
 struct rpcbind_args {
 	struct rpc_xprt *	r_xprt;
 
@@ -161,6 +164,56 @@
 	kfree(map);
 }
 
+static int rpcb_get_local(void)
+{
+	int cnt;
+
+	spin_lock(&rpcb_clnt_lock);
+	if (rpcb_users)
+		rpcb_users++;
+	cnt = rpcb_users;
+	spin_unlock(&rpcb_clnt_lock);
+
+	return cnt;
+}
+
+void rpcb_put_local(void)
+{
+	struct rpc_clnt *clnt = rpcb_local_clnt;
+	struct rpc_clnt *clnt4 = rpcb_local_clnt4;
+	int shutdown;
+
+	spin_lock(&rpcb_clnt_lock);
+	if (--rpcb_users == 0) {
+		rpcb_local_clnt = NULL;
+		rpcb_local_clnt4 = NULL;
+	}
+	shutdown = !rpcb_users;
+	spin_unlock(&rpcb_clnt_lock);
+
+	if (shutdown) {
+		/*
+		 * cleanup_rpcb_clnt - remove xprtsock's sysctls, unregister
+		 */
+		if (clnt4)
+			rpc_shutdown_client(clnt4);
+		if (clnt)
+			rpc_shutdown_client(clnt);
+	}
+}
+
+static void rpcb_set_local(struct rpc_clnt *clnt, struct rpc_clnt *clnt4)
+{
+	/* Protected by rpcb_create_local_mutex */
+	rpcb_local_clnt = clnt;
+	rpcb_local_clnt4 = clnt4;
+	smp_wmb(); 
+	rpcb_users = 1;
+	dprintk("RPC:       created new rpcb local clients (rpcb_local_clnt: "
+			"%p, rpcb_local_clnt4: %p)\n", rpcb_local_clnt,
+			rpcb_local_clnt4);
+}
+
 /*
  * Returns zero on success, otherwise a negative errno value
  * is returned.
@@ -205,9 +258,7 @@
 		clnt4 = NULL;
 	}
 
-	/* Protected by rpcb_create_local_mutex */
-	rpcb_local_clnt = clnt;
-	rpcb_local_clnt4 = clnt4;
+	rpcb_set_local(clnt, clnt4);
 
 out:
 	return result;
@@ -259,9 +310,7 @@
 		clnt4 = NULL;
 	}
 
-	/* Protected by rpcb_create_local_mutex */
-	rpcb_local_clnt = clnt;
-	rpcb_local_clnt4 = clnt4;
+	rpcb_set_local(clnt, clnt4);
 
 out:
 	return result;
@@ -271,16 +320,16 @@
  * Returns zero on success, otherwise a negative errno value
  * is returned.
  */
-static int rpcb_create_local(void)
+int rpcb_create_local(void)
 {
 	static DEFINE_MUTEX(rpcb_create_local_mutex);
 	int result = 0;
 
-	if (rpcb_local_clnt)
+	if (rpcb_get_local())
 		return result;
 
 	mutex_lock(&rpcb_create_local_mutex);
-	if (rpcb_local_clnt)
+	if (rpcb_get_local())
 		goto out;
 
 	if (rpcb_create_local_unix() != 0)
@@ -382,11 +431,6 @@
 	struct rpc_message msg = {
 		.rpc_argp	= &map,
 	};
-	int error;
-
-	error = rpcb_create_local();
-	if (error)
-		return error;
 
 	dprintk("RPC:       %sregistering (%u, %u, %d, %u) with local "
 			"rpcbind\n", (port ? "" : "un"),
@@ -522,11 +566,7 @@
 	struct rpc_message msg = {
 		.rpc_argp	= &map,
 	};
-	int error;
 
-	error = rpcb_create_local();
-	if (error)
-		return error;
 	if (rpcb_local_clnt4 == NULL)
 		return -EPROTONOSUPPORT;
 
@@ -1060,15 +1100,3 @@
 	.version	= rpcb_version,
 	.stats		= &rpcb_stats,
 };
-
-/**
- * cleanup_rpcb_clnt - remove xprtsock's sysctls, unregister
- *
- */
-void cleanup_rpcb_clnt(void)
-{
-	if (rpcb_local_clnt4)
-		rpc_shutdown_client(rpcb_local_clnt4);
-	if (rpcb_local_clnt)
-		rpc_shutdown_client(rpcb_local_clnt);
-}
diff --git a/net/sunrpc/socklib.c b/net/sunrpc/socklib.c
index 10b4319..145e6784 100644
--- a/net/sunrpc/socklib.c
+++ b/net/sunrpc/socklib.c
@@ -14,6 +14,7 @@
 #include <linux/pagemap.h>
 #include <linux/udp.h>
 #include <linux/sunrpc/xdr.h>
+#include <linux/export.h>
 
 
 /**
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index 9d08091..8ec9778 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -61,8 +61,6 @@
 
 extern struct cache_detail unix_gid_cache;
 
-extern void cleanup_rpcb_clnt(void);
-
 static int __init
 init_sunrpc(void)
 {
@@ -102,7 +100,6 @@
 static void __exit
 cleanup_sunrpc(void)
 {
-	cleanup_rpcb_clnt();
 	rpcauth_remove_module();
 	cleanup_socket_xprt();
 	svc_cleanup_xprt_sock();
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index dd5cc00..6e03888 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -366,6 +366,42 @@
 	return &serv->sv_pools[pidx % serv->sv_nrpools];
 }
 
+static int svc_rpcb_setup(struct svc_serv *serv)
+{
+	int err;
+
+	err = rpcb_create_local();
+	if (err)
+		return err;
+
+	/* Remove any stale portmap registrations */
+	svc_unregister(serv);
+	return 0;
+}
+
+void svc_rpcb_cleanup(struct svc_serv *serv)
+{
+	svc_unregister(serv);
+	rpcb_put_local();
+}
+EXPORT_SYMBOL_GPL(svc_rpcb_cleanup);
+
+static int svc_uses_rpcbind(struct svc_serv *serv)
+{
+	struct svc_program	*progp;
+	unsigned int		i;
+
+	for (progp = serv->sv_program; progp; progp = progp->pg_next) {
+		for (i = 0; i < progp->pg_nvers; i++) {
+			if (progp->pg_vers[i] == NULL)
+				continue;
+			if (progp->pg_vers[i]->vs_hidden == 0)
+				return 1;
+		}
+	}
+
+	return 0;
+}
 
 /*
  * Create an RPC service
@@ -431,8 +467,15 @@
 		spin_lock_init(&pool->sp_lock);
 	}
 
-	/* Remove any stale portmap registrations */
-	svc_unregister(serv);
+	if (svc_uses_rpcbind(serv)) {
+	       	if (svc_rpcb_setup(serv) < 0) {
+			kfree(serv->sv_pools);
+			kfree(serv);
+			return NULL;
+		}
+		if (!serv->sv_shutdown)
+			serv->sv_shutdown = svc_rpcb_cleanup;
+	}
 
 	return serv;
 }
@@ -500,7 +543,6 @@
 	if (svc_serv_is_pooled(serv))
 		svc_pool_map_put();
 
-	svc_unregister(serv);
 	kfree(serv->sv_pools);
 	kfree(serv);
 }
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index d86bb67..447cd0e 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -14,6 +14,7 @@
 #include <linux/sunrpc/svc_xprt.h>
 #include <linux/sunrpc/svcsock.h>
 #include <linux/sunrpc/xprt.h>
+#include <linux/module.h>
 
 #define RPCDBG_FACILITY	RPCDBG_SVCXPRT
 
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index dfd686e..71bed1c 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -21,6 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/fcntl.h>
 #include <linux/net.h>
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index a385430..ba1296d 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -50,6 +50,7 @@
 #include <rdma/ib_verbs.h>
 #include <rdma/rdma_cm.h>
 #include <linux/sunrpc/svc_rdma.h>
+#include <linux/export.h>
 
 #define RPCDBG_FACILITY	RPCDBG_SVCXPRT
 
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d7f97ef..55472c4 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -496,7 +496,7 @@
 	struct rpc_rqst *req = task->tk_rqstp;
 	struct rpc_xprt *xprt = req->rq_xprt;
 	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
-	int ret = 0;
+	int ret = -EAGAIN;
 
 	dprintk("RPC: %5u xmit incomplete (%u left of %u)\n",
 			task->tk_pid, req->rq_slen - req->rq_bytes_sent,
@@ -508,7 +508,6 @@
 	/* Don't race with disconnect */
 	if (xprt_connected(xprt)) {
 		if (test_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags)) {
-			ret = -EAGAIN;
 			/*
 			 * Notify TCP that we're limited by the application
 			 * window size
@@ -2530,8 +2529,10 @@
 		int err;
 		err = xs_init_anyaddr(args->dstaddr->sa_family,
 					(struct sockaddr *)&new->srcaddr);
-		if (err != 0)
+		if (err != 0) {
+			xprt_free(xprt);
 			return ERR_PTR(err);
+		}
 	}
 
 	return xprt;
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index ca84212..e758139 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/export.h>
 #include <linux/sysctl.h>
 #include <linux/nsproxy.h>
 
diff --git a/net/tipc/core.c b/net/tipc/core.c
index 943b6af..c21331d 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -34,6 +34,8 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <linux/module.h>
+
 #include "core.h"
 #include "ref.h"
 #include "name_table.h"
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 9440a3d..42b8324 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -34,6 +34,7 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <linux/export.h>
 #include <net/sock.h>
 
 #include "core.h"
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 466fbcc..b595a3d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1957,6 +1957,7 @@
 			if ((UNIXCB(skb).pid  != siocb->scm->pid) ||
 			    (UNIXCB(skb).cred != siocb->scm->cred)) {
 				skb_queue_head(&sk->sk_receive_queue, skb);
+				sk->sk_data_ready(sk, skb->len);
 				break;
 			}
 		} else {
@@ -1974,6 +1975,7 @@
 		chunk = min_t(unsigned int, skb->len, size);
 		if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
 			skb_queue_head(&sk->sk_receive_queue, skb);
+			sk->sk_data_ready(sk, skb->len);
 			if (copied == 0)
 				copied = -EFAULT;
 			break;
@@ -1991,6 +1993,7 @@
 			/* put the skb back if we didn't use it up.. */
 			if (skb->len) {
 				skb_queue_head(&sk->sk_receive_queue, skb);
+				sk->sk_data_ready(sk, skb->len);
 				break;
 			}
 
@@ -2006,6 +2009,7 @@
 
 			/* put message back and return */
 			skb_queue_head(&sk->sk_receive_queue, skb);
+			sk->sk_data_ready(sk, skb->len);
 			break;
 		}
 	} while (size);
diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c
index f346395..c43612e 100644
--- a/net/wanrouter/wanproc.c
+++ b/net/wanrouter/wanproc.c
@@ -81,7 +81,6 @@
  *	Iterator
  */
 static void *r_start(struct seq_file *m, loff_t *pos)
-	__acquires(kernel_lock)
 {
 	struct wan_device *wandev;
 	loff_t l = *pos;
@@ -103,7 +102,6 @@
 }
 
 static void r_stop(struct seq_file *m, void *v)
-	__releases(kernel_lock)
 {
 	mutex_unlock(&config_mutex);
 }
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index d5b7c37..0694d62 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -77,6 +77,7 @@
 #include <linux/netdevice.h>
 #include <linux/wimax.h>
 #include <linux/security.h>
+#include <linux/export.h>
 #include "wimax-internal.h"
 
 
diff --git a/net/wimax/op-reset.c b/net/wimax/op-reset.c
index 68bedf3..7ceffe3 100644
--- a/net/wimax/op-reset.c
+++ b/net/wimax/op-reset.c
@@ -32,6 +32,7 @@
 #include <net/genetlink.h>
 #include <linux/wimax.h>
 #include <linux/security.h>
+#include <linux/export.h>
 #include "wimax-internal.h"
 
 #define D_SUBMODULE op_reset
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 2609e44..7ab60ba 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -65,6 +65,7 @@
 #include <linux/wimax.h>
 #include <linux/security.h>
 #include <linux/rfkill.h>
+#include <linux/export.h>
 #include "wimax-internal.h"
 
 #define D_SUBMODULE op_rfkill
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index ee99e7d..3c65eae 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -55,6 +55,7 @@
 #include <net/genetlink.h>
 #include <linux/netdevice.h>
 #include <linux/wimax.h>
+#include <linux/module.h>
 #include "wimax-internal.h"
 
 
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index f33fbb7..30f20fe 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -7,6 +7,7 @@
 #include <linux/etherdevice.h>
 #include <linux/if_arp.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include "wext-compat.h"
 #include "nl80211.h"
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 4423e64..b7b7868 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -1,4 +1,5 @@
 #include <linux/ieee80211.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include "nl80211.h"
 #include "core.h"
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 48260c2..ffafda5 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -89,8 +89,8 @@
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
 
-	[NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN },
-	[NL80211_ATTR_PREV_BSSID] = { .type = NLA_BINARY, .len = ETH_ALEN },
+	[NL80211_ATTR_MAC] = { .len = ETH_ALEN },
+	[NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN },
 
 	[NL80211_ATTR_KEY] = { .type = NLA_NESTED, },
 	[NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY,
@@ -132,8 +132,7 @@
 	[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
 	[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
 
-	[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
-					 .len = NL80211_HT_CAPABILITY_LEN },
+	[NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
 
 	[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
 	[NL80211_ATTR_IE] = { .type = NLA_BINARY,
@@ -1253,6 +1252,12 @@
 			goto bad_res;
 		}
 
+		if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+		    netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+
 		nla_for_each_nested(nl_txq_params,
 				    info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
 				    rem_txq_params) {
diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c
index dbe35e1..c4ad795 100644
--- a/net/wireless/radiotap.c
+++ b/net/wireless/radiotap.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include <net/ieee80211_radiotap.h>
 #include <asm/unaligned.h>
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 2520a1b..77e9267 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -36,12 +36,14 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/random.h>
 #include <linux/ctype.h>
 #include <linux/nl80211.h>
 #include <linux/platform_device.h>
+#include <linux/moduleparam.h>
 #include <net/cfg80211.h>
 #include "core.h"
 #include "reg.h"
@@ -2035,6 +2037,10 @@
 	}
 
 	request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
+	if (!request_wiphy) {
+		reg_set_request_processed();
+		return -ENODEV;
+	}
 
 	if (!last_request->intersect) {
 		int r;
@@ -2263,6 +2269,9 @@
 
 	kfree(last_request);
 
+	last_request = NULL;
+	dev_set_uevent_suppress(&reg_pdev->dev, true);
+
 	platform_device_unregister(reg_pdev);
 
 	spin_lock_bh(&reg_pending_beacons_lock);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 0fb1424..dc23b31 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -259,17 +259,20 @@
 {
 	const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
 	const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
-	int r;
 
+	/* equal if both missing */
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1 || !ie2)
+	/* sort missing IE before (left of) present IE */
+	if (!ie1)
 		return -1;
+	if (!ie2)
+		return 1;
 
-	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
-	if (r == 0 && ie1[1] != ie2[1])
+	/* sort by length first, then by contents */
+	if (ie1[1] != ie2[1])
 		return ie2[1] - ie1[1];
-	return r;
+	return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
 }
 
 static bool is_bss(struct cfg80211_bss *a,
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 6e86d5a..0acfdc9 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -10,6 +10,7 @@
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/wireless.h>
+#include <linux/export.h>
 #include <net/iw_handler.h>
 #include <net/cfg80211.h>
 #include <net/rtnetlink.h>
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 2f178f7..4dde429 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  */
+#include <linux/export.h>
 #include <linux/bitops.h>
 #include <linux/etherdevice.h>
 #include <linux/slab.h>
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 62f121d..6897436 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -8,6 +8,7 @@
  * Copyright 2008-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
+#include <linux/export.h>
 #include <linux/wireless.h>
 #include <linux/nl80211.h>
 #include <linux/if_arp.h>
diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
index fdbc23c..0af7f54 100644
--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/wireless.h>
 #include <linux/uaccess.h>
+#include <linux/export.h>
 #include <net/cfg80211.h>
 #include <net/iw_handler.h>
 #include <net/netlink.h>
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index 0d4b8c3..326750b 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2009   Intel Corporation. All rights reserved.
  */
 
+#include <linux/export.h>
 #include <linux/etherdevice.h>
 #include <linux/if_arp.h>
 #include <linux/slab.h>
diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
index 6dcfe65..5d643a5 100644
--- a/net/wireless/wext-spy.c
+++ b/net/wireless/wext-spy.c
@@ -10,6 +10,7 @@
 #include <linux/wireless.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <net/iw_handler.h>
 #include <net/arp.h>
 #include <net/wext.h>
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 5f03e4e..3e16c6a 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1261,14 +1261,19 @@
 	struct x25_sock *x25 = x25_sk(sk);
 	struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)msg->msg_name;
 	size_t copied;
-	int qbit, header_len = x25->neighbour->extended ?
-		X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
-
+	int qbit, header_len;
 	struct sk_buff *skb;
 	unsigned char *asmptr;
 	int rc = -ENOTCONN;
 
 	lock_sock(sk);
+
+	if (x25->neighbour == NULL)
+		goto out;
+
+	header_len = x25->neighbour->extended ?
+		X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
+
 	/*
 	 * This works for seqpacket too. The receiver has ordered the queue for
 	 * us! We do one quick check first though
diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c
index 7ff3737..2ffde46 100644
--- a/net/x25/x25_proc.c
+++ b/net/x25/x25_proc.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <net/x25.h>
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 552df27..2118d64 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2382,9 +2382,11 @@
 	return dst_metric_advmss(dst->path);
 }
 
-static unsigned int xfrm_default_mtu(const struct dst_entry *dst)
+static unsigned int xfrm_mtu(const struct dst_entry *dst)
 {
-	return dst_mtu(dst->path);
+	unsigned int mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	return mtu ? : dst_mtu(dst->path);
 }
 
 static struct neighbour *xfrm_neigh_lookup(const struct dst_entry *dst, const void *daddr)
@@ -2411,8 +2413,8 @@
 			dst_ops->check = xfrm_dst_check;
 		if (likely(dst_ops->default_advmss == NULL))
 			dst_ops->default_advmss = xfrm_default_advmss;
-		if (likely(dst_ops->default_mtu == NULL))
-			dst_ops->default_mtu = xfrm_default_mtu;
+		if (likely(dst_ops->mtu == NULL))
+			dst_ops->mtu = xfrm_mtu;
 		if (likely(dst_ops->negative_advice == NULL))
 			dst_ops->negative_advice = xfrm_negative_advice;
 		if (likely(dst_ops->link_failure == NULL))
diff --git a/net/xfrm/xfrm_proc.c b/net/xfrm/xfrm_proc.c
index 58d9ae0..d0a1af8 100644
--- a/net/xfrm/xfrm_proc.c
+++ b/net/xfrm/xfrm_proc.c
@@ -12,6 +12,7 @@
  */
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/export.h>
 #include <net/snmp.h>
 #include <net/xfrm.h>
 
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 6ca3574..39e02c5 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -18,6 +18,7 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
+#include <linux/export.h>
 #include <net/xfrm.h>
 
 u32 xfrm_replay_seqhi(struct xfrm_state *x, __be32 net_seq)
diff --git a/samples/Kconfig b/samples/Kconfig
index 96a7572..41063e7 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -61,10 +61,4 @@
 	  Build an example of how to dynamically add the hello
 	  command to the kdb shell.
 
-config SAMPLE_HIDRAW
-	bool "Build simple hidraw example"
-	depends on HIDRAW && HEADERS_CHECK
-	help
-	  Build an example of how to use hidraw from userspace.
-
 endif # SAMPLES
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index a0fd502..d2b366c1 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -46,7 +46,7 @@
 # If the save-* variables changed error out
 ifeq ($(KBUILD_NOPEDANTIC),)
         ifneq ("$(save-cflags)","$(CFLAGS)")
-                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
+                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
         endif
 endif
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index aeea84a..5d986d9 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -167,6 +167,7 @@
 quiet_cmd_gperf = GPERF $@
       cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
 
+.PRECIOUS: $(src)/%.hash.c_shipped
 $(src)/%.hash.c_shipped: $(src)/%.gperf
 	$(call cmd,gperf)
 
@@ -177,6 +178,7 @@
 quiet_cmd_flex = LEX     $@
       cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
 
+.PRECIOUS: $(src)/%.lex.c_shipped
 $(src)/%.lex.c_shipped: $(src)/%.l
 	$(call cmd,flex)
 
@@ -187,12 +189,14 @@
 quiet_cmd_bison = YACC    $@
       cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
 
+.PRECIOUS: $(src)/%.tab.c_shipped
 $(src)/%.tab.c_shipped: $(src)/%.y
 	$(call cmd,bison)
 
 quiet_cmd_bison_h = YACC    $@
       cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
 
+.PRECIOUS: $(src)/%.tab.h_shipped
 $(src)/%.tab.h_shipped: $(src)/%.y
 	$(call cmd,bison_h)
 
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index 291228e..cb1f50c 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -345,6 +345,7 @@
 		memcpy(s, m, p-m); s[p-m] = 0;
 		if (strrcmp(s, "include/generated/autoconf.h") &&
 		    strrcmp(s, "arch/um/include/uml-config.h") &&
+		    strrcmp(s, "include/linux/kconfig.h") &&
 		    strrcmp(s, ".ver")) {
 			/*
 			 * Do not list the source file as dependency, so that
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 5e93342..8fda3b3 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1683,6 +1683,20 @@
 			#print "is_end<$is_end> length<$length>\n";
 		}
 
+		if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
+		    ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
+			my $flag = $1;
+			my $replacement = {
+				'EXTRA_AFLAGS' =>   'asflags-y',
+				'EXTRA_CFLAGS' =>   'ccflags-y',
+				'EXTRA_CPPFLAGS' => 'cppflags-y',
+				'EXTRA_LDFLAGS' =>  'ldflags-y',
+			};
+
+			WARN("DEPRECATED_VARIABLE",
+			     "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag});
+		}
+
 # check we are in a valid source file if not then ignore this hunk
 		next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
 
diff --git a/scripts/extract-vmlinux b/scripts/extract-vmlinux
new file mode 100755
index 0000000..5061abc
--- /dev/null
+++ b/scripts/extract-vmlinux
@@ -0,0 +1,62 @@
+#!/bin/sh
+# ----------------------------------------------------------------------
+# extract-vmlinux - Extract uncompressed vmlinux from a kernel image
+#
+# Inspired from extract-ikconfig
+# (c) 2009,2010 Dick Streefland <dick@streefland.net>
+#
+# (c) 2011      Corentin Chary <corentin.chary@gmail.com>
+#
+# Licensed under the GNU General Public License, version 2 (GPLv2).
+# ----------------------------------------------------------------------
+
+check_vmlinux()
+{
+	# Use readelf to check if it's a valid ELF
+	# TODO: find a better to way to check that it's really vmlinux
+	#       and not just an elf
+	readelf -h $1 > /dev/null 2>&1 || return 1
+
+	cat $1
+	exit 0
+}
+
+try_decompress()
+{
+	# The obscure use of the "tr" filter is to work around older versions of
+	# "grep" that report the byte offset of the line instead of the pattern.
+
+	# Try to find the header ($1) and decompress from here
+	for	pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"`
+	do
+		pos=${pos%%:*}
+		tail -c+$pos "$img" | $3 > $tmp 2> /dev/null
+		check_vmlinux $tmp
+	done
+}
+
+# Check invocation:
+me=${0##*/}
+img=$1
+if	[ $# -ne 1 -o ! -s "$img" ]
+then
+	echo "Usage: $me <kernel-image>" >&2
+	exit 2
+fi
+
+# Prepare temp files:
+tmp=$(mktemp /tmp/vmlinux-XXX)
+trap "rm -f $tmp" 0
+
+# Initial attempt for uncompressed images or objects:
+check_vmlinux $img
+
+# That didn't work, so retry after decompression.
+try_decompress '\037\213\010' xy    gunzip
+try_decompress '\3757zXZ\000' abcde unxz
+try_decompress 'BZh'          xy    bunzip2
+try_decompress '\135\0\0\0'   xxx   unlzma
+try_decompress '\211\114\132' xy    'lzop -d'
+
+# Bail out:
+echo "$me: Cannot find vmlinux." >&2
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index 6d3fda0..8a10649 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -40,7 +40,8 @@
 static FILE *debugfile;
 
 int cur_line = 1;
-char *cur_filename;
+char *cur_filename, *source_file;
+int in_source_file;
 
 static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
 	   flag_preserve, flag_warnings;
diff --git a/scripts/genksyms/genksyms.h b/scripts/genksyms/genksyms.h
index 7ec52ae..3bffdca 100644
--- a/scripts/genksyms/genksyms.h
+++ b/scripts/genksyms/genksyms.h
@@ -37,6 +37,7 @@
 struct string_list {
 	struct string_list *next;
 	enum symbol_type tag;
+	int in_source_file;
 	char *string;
 };
 
@@ -57,7 +58,8 @@
 #define YYSTYPE yystype
 
 extern int cur_line;
-extern char *cur_filename;
+extern char *cur_filename, *source_file;
+extern int in_source_file;
 
 struct symbol *find_symbol(const char *name, enum symbol_type ns, int exact);
 struct symbol *add_symbol(const char *name, enum symbol_type type,
diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l
index 400ae06..f770071 100644
--- a/scripts/genksyms/lex.l
+++ b/scripts/genksyms/lex.l
@@ -116,6 +116,7 @@
 			  cur_node->tag =				   \
 			    find_symbol(cur_node->string, SYM_ENUM_CONST, 1)?\
 			    SYM_ENUM_CONST : SYM_NORMAL ;		   \
+			  cur_node->in_source_file = in_source_file;       \
 			} while (0)
 
 #define APP		_APP(yytext, yyleng)
@@ -166,6 +167,13 @@
       cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
       cur_line = atoi(yytext+2);
 
+      if (!source_file) {
+        source_file = xstrdup(cur_filename);
+        in_source_file = 1;
+      } else {
+        in_source_file = (strcmp(cur_filename, source_file) == 0);
+      }
+
       goto repeat;
     }
 
diff --git a/scripts/genksyms/lex.lex.c_shipped b/scripts/genksyms/lex.lex.c_shipped
index c83cf60..0bf4157 100644
--- a/scripts/genksyms/lex.lex.c_shipped
+++ b/scripts/genksyms/lex.lex.c_shipped
@@ -660,7 +660,7 @@
 /* This used to be an fputs(), but since the string might contain NUL's,
  * we now use fwrite().
  */
-#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
 #endif
 
 /* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
@@ -671,7 +671,7 @@
 	if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
 		{ \
 		int c = '*'; \
-		unsigned n; \
+		int n; \
 		for ( n = 0; n < max_size && \
 			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
 			buf[n] = (char) c; \
@@ -1926,6 +1926,7 @@
 			  cur_node->tag =				   \
 			    find_symbol(cur_node->string, SYM_ENUM_CONST, 1)?\
 			    SYM_ENUM_CONST : SYM_NORMAL ;		   \
+			  cur_node->in_source_file = in_source_file;       \
 			} while (0)
 
 #define APP		_APP(yytext, yyleng)
@@ -1975,6 +1976,13 @@
       cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
       cur_line = atoi(yytext+2);
 
+      if (!source_file) {
+        source_file = xstrdup(cur_filename);
+        in_source_file = 1;
+      } else {
+        in_source_file = (strcmp(cur_filename, source_file) == 0);
+      }
+
       goto repeat;
     }
 
diff --git a/scripts/genksyms/parse.tab.c_shipped b/scripts/genksyms/parse.tab.c_shipped
index 61d4a5d..ece53c7 100644
--- a/scripts/genksyms/parse.tab.c_shipped
+++ b/scripts/genksyms/parse.tab.c_shipped
@@ -1,9 +1,8 @@
-/* A Bison parser, made by GNU Bison 2.4.3.  */
+/* A Bison parser, made by GNU Bison 2.5.  */
 
-/* Skeleton implementation for Bison's Yacc-like parsers in C
+/* Bison implementation for Yacc-like parsers in C
    
-      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-   2009, 2010 Free Software Foundation, Inc.
+      Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc.
    
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -45,7 +44,7 @@
 #define YYBISON 1
 
 /* Bison version.  */
-#define YYBISON_VERSION "2.4.3"
+#define YYBISON_VERSION "2.5"
 
 /* Skeleton name.  */
 #define YYSKELETON_NAME "yacc.c"
@@ -96,6 +95,25 @@
   free_list(b, e);
 }
 
+/* Record definition of a struct/union/enum */
+static void record_compound(struct string_list **keyw,
+		       struct string_list **ident,
+		       struct string_list **body,
+		       enum symbol_type type)
+{
+	struct string_list *b = *body, *i = *ident, *r;
+
+	if (i->in_source_file) {
+		remove_node(keyw);
+		(*ident)->tag = type;
+		remove_list(body, ident);
+		return;
+	}
+	r = copy_node(i); r->tag = type;
+	r->next = (*keyw)->next; *body = r; (*keyw)->next = NULL;
+	add_symbol(i->string, type, b, is_extern);
+}
+
 
 
 
@@ -283,11 +301,11 @@
 #    define alloca _alloca
 #   else
 #    define YYSTACK_ALLOC alloca
-#    if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+#    if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 #     include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-#     ifndef _STDLIB_H
-#      define _STDLIB_H 1
+#     ifndef EXIT_SUCCESS
+#      define EXIT_SUCCESS 0
 #     endif
 #    endif
 #   endif
@@ -310,24 +328,24 @@
 #  ifndef YYSTACK_ALLOC_MAXIMUM
 #   define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
 #  endif
-#  if (defined __cplusplus && ! defined _STDLIB_H \
+#  if (defined __cplusplus && ! defined EXIT_SUCCESS \
        && ! ((defined YYMALLOC || defined malloc) \
 	     && (defined YYFREE || defined free)))
 #   include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-#   ifndef _STDLIB_H
-#    define _STDLIB_H 1
+#   ifndef EXIT_SUCCESS
+#    define EXIT_SUCCESS 0
 #   endif
 #  endif
 #  ifndef YYMALLOC
 #   define YYMALLOC malloc
-#   if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+#   if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
 #   endif
 #  endif
 #  ifndef YYFREE
 #   define YYFREE free
-#   if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+#   if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 void free (void *); /* INFRINGES ON USER NAME SPACE */
 #   endif
@@ -356,23 +374,7 @@
      ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
       + YYSTACK_GAP_MAXIMUM)
 
-/* Copy COUNT objects from FROM to TO.  The source and destination do
-   not overlap.  */
-# ifndef YYCOPY
-#  if defined __GNUC__ && 1 < __GNUC__
-#   define YYCOPY(To, From, Count) \
-      __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-#  else
-#   define YYCOPY(To, From, Count)		\
-      do					\
-	{					\
-	  YYSIZE_T yyi;				\
-	  for (yyi = 0; yyi < (Count); yyi++)	\
-	    (To)[yyi] = (From)[yyi];		\
-	}					\
-      while (YYID (0))
-#  endif
-# endif
+# define YYCOPY_NEEDED 1
 
 /* Relocate STACK from its old location to the new one.  The
    local variables YYSIZE and YYSTACKSIZE give the old and new number of
@@ -392,6 +394,26 @@
 
 #endif
 
+#if defined YYCOPY_NEEDED && YYCOPY_NEEDED
+/* Copy COUNT objects from FROM to TO.  The source and destination do
+   not overlap.  */
+# ifndef YYCOPY
+#  if defined __GNUC__ && 1 < __GNUC__
+#   define YYCOPY(To, From, Count) \
+      __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+#  else
+#   define YYCOPY(To, From, Count)		\
+      do					\
+	{					\
+	  YYSIZE_T yyi;				\
+	  for (yyi = 0; yyi < (Count); yyi++)	\
+	    (To)[yyi] = (From)[yyi];		\
+	}					\
+      while (YYID (0))
+#  endif
+# endif
+#endif /* !YYCOPY_NEEDED */
+
 /* YYFINAL -- State number of the termination state.  */
 #define YYFINAL  4
 /* YYLAST -- Last index in YYTABLE.  */
@@ -514,20 +536,20 @@
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
 static const yytype_uint16 yyrline[] =
 {
-       0,   104,   104,   105,   109,   109,   115,   115,   117,   117,
-     119,   120,   121,   122,   123,   124,   128,   142,   143,   147,
-     155,   168,   174,   175,   179,   180,   184,   190,   194,   195,
-     196,   197,   198,   202,   203,   204,   205,   209,   211,   213,
-     217,   224,   231,   241,   244,   245,   249,   250,   251,   252,
-     253,   254,   255,   256,   257,   258,   259,   263,   268,   269,
-     273,   274,   278,   278,   278,   279,   287,   288,   292,   301,
-     303,   305,   307,   309,   316,   317,   321,   322,   323,   325,
-     327,   329,   331,   336,   337,   338,   342,   343,   347,   348,
-     353,   358,   360,   364,   365,   373,   377,   379,   381,   383,
-     385,   390,   399,   400,   405,   410,   411,   415,   416,   420,
-     421,   425,   427,   432,   433,   437,   438,   442,   443,   444,
-     448,   452,   453,   457,   458,   462,   463,   466,   471,   479,
-     483,   484,   488
+       0,   123,   123,   124,   128,   128,   134,   134,   136,   136,
+     138,   139,   140,   141,   142,   143,   147,   161,   162,   166,
+     174,   187,   193,   194,   198,   199,   203,   209,   213,   214,
+     215,   216,   217,   221,   222,   223,   224,   228,   230,   232,
+     236,   238,   240,   245,   248,   249,   253,   254,   255,   256,
+     257,   258,   259,   260,   261,   262,   263,   267,   272,   273,
+     277,   278,   282,   282,   282,   283,   291,   292,   296,   305,
+     307,   309,   311,   313,   320,   321,   325,   326,   327,   329,
+     331,   333,   335,   340,   341,   342,   346,   347,   351,   352,
+     357,   362,   364,   368,   369,   377,   381,   383,   385,   387,
+     389,   394,   403,   404,   409,   414,   415,   419,   420,   424,
+     425,   429,   431,   436,   437,   441,   442,   446,   447,   448,
+     452,   456,   457,   461,   462,   466,   467,   470,   475,   483,
+     487,   488,   492
 };
 #endif
 
@@ -618,8 +640,8 @@
        0,     1,     5
 };
 
-/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
-   STATE-NUM when YYTABLE doesn't specify something else to do.  Zero
+/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM.
+   Performed when YYTABLE doesn't specify something else to do.  Zero
    means the default is an error.  */
 static const yytype_uint8 yydefact[] =
 {
@@ -692,8 +714,7 @@
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
    positive, shift that token.  If negative, reduce the rule which
-   number is the opposite.  If zero, do what YYDEFACT says.
-   If YYTABLE_NINF, syntax error.  */
+   number is the opposite.  If YYTABLE_NINF, syntax error.  */
 #define YYTABLE_NINF -109
 static const yytype_int16 yytable[] =
 {
@@ -753,6 +774,12 @@
        0,     0,    34
 };
 
+#define yypact_value_is_default(yystate) \
+  ((yystate) == (-135))
+
+#define yytable_value_is_error(yytable_value) \
+  YYID (0)
+
 static const yytype_int16 yycheck[] =
 {
       59,    38,    79,     3,     1,     8,    56,    37,    26,    37,
@@ -869,7 +896,6 @@
     {								\
       yychar = (Token);						\
       yylval = (Value);						\
-      yytoken = YYTRANSLATE (yychar);				\
       YYPOPSTACK (1);						\
       goto yybackup;						\
     }								\
@@ -911,19 +937,10 @@
 #endif
 
 
-/* YY_LOCATION_PRINT -- Print the location on the stream.
-   This macro was not mandated originally: define only if we know
-   we won't break user code: when these are the locations we know.  */
+/* This macro is provided for backward compatibility. */
 
 #ifndef YY_LOCATION_PRINT
-# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL
-#  define YY_LOCATION_PRINT(File, Loc)			\
-     fprintf (File, "%d.%d-%d.%d",			\
-	      (Loc).first_line, (Loc).first_column,	\
-	      (Loc).last_line,  (Loc).last_column)
-# else
-#  define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
+# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
 #endif
 
 
@@ -1115,7 +1132,6 @@
 # define YYMAXDEPTH 10000
 #endif
 
-
 
 #if YYERROR_VERBOSE
 
@@ -1218,115 +1234,142 @@
 }
 # endif
 
-/* Copy into YYRESULT an error message about the unexpected token
-   YYCHAR while in state YYSTATE.  Return the number of bytes copied,
-   including the terminating null byte.  If YYRESULT is null, do not
-   copy anything; just return the number of bytes that would be
-   copied.  As a special case, return 0 if an ordinary "syntax error"
-   message will do.  Return YYSIZE_MAXIMUM if overflow occurs during
-   size calculation.  */
-static YYSIZE_T
-yysyntax_error (char *yyresult, int yystate, int yychar)
+/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message
+   about the unexpected token YYTOKEN for the state stack whose top is
+   YYSSP.
+
+   Return 0 if *YYMSG was successfully written.  Return 1 if *YYMSG is
+   not large enough to hold the message.  In that case, also set
+   *YYMSG_ALLOC to the required number of bytes.  Return 2 if the
+   required number of bytes is too large to store.  */
+static int
+yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg,
+                yytype_int16 *yyssp, int yytoken)
 {
-  int yyn = yypact[yystate];
+  YYSIZE_T yysize0 = yytnamerr (0, yytname[yytoken]);
+  YYSIZE_T yysize = yysize0;
+  YYSIZE_T yysize1;
+  enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+  /* Internationalized format string. */
+  const char *yyformat = 0;
+  /* Arguments of yyformat. */
+  char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+  /* Number of reported tokens (one for the "unexpected", one per
+     "expected"). */
+  int yycount = 0;
 
-  if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
-    return 0;
-  else
+  /* There are many possibilities here to consider:
+     - Assume YYFAIL is not used.  It's too flawed to consider.  See
+       <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html>
+       for details.  YYERROR is fine as it does not invoke this
+       function.
+     - If this state is a consistent state with a default action, then
+       the only way this function was invoked is if the default action
+       is an error action.  In that case, don't check for expected
+       tokens because there are none.
+     - The only way there can be no lookahead present (in yychar) is if
+       this state is a consistent state with a default action.  Thus,
+       detecting the absence of a lookahead is sufficient to determine
+       that there is no unexpected or expected token to report.  In that
+       case, just report a simple "syntax error".
+     - Don't assume there isn't a lookahead just because this state is a
+       consistent state with a default action.  There might have been a
+       previous inconsistent state, consistent state with a non-default
+       action, or user semantic action that manipulated yychar.
+     - Of course, the expected token list depends on states to have
+       correct lookahead information, and it depends on the parser not
+       to perform extra reductions after fetching a lookahead from the
+       scanner and before detecting a syntax error.  Thus, state merging
+       (from LALR or IELR) and default reductions corrupt the expected
+       token list.  However, the list is correct for canonical LR with
+       one exception: it will still contain any token that will not be
+       accepted due to an error action in a later state.
+  */
+  if (yytoken != YYEMPTY)
     {
-      int yytype = YYTRANSLATE (yychar);
-      YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
-      YYSIZE_T yysize = yysize0;
-      YYSIZE_T yysize1;
-      int yysize_overflow = 0;
-      enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
-      char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
-      int yyx;
+      int yyn = yypact[*yyssp];
+      yyarg[yycount++] = yytname[yytoken];
+      if (!yypact_value_is_default (yyn))
+        {
+          /* Start YYX at -YYN if negative to avoid negative indexes in
+             YYCHECK.  In other words, skip the first -YYN actions for
+             this state because they are default actions.  */
+          int yyxbegin = yyn < 0 ? -yyn : 0;
+          /* Stay within bounds of both yycheck and yytname.  */
+          int yychecklim = YYLAST - yyn + 1;
+          int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+          int yyx;
 
-# if 0
-      /* This is so xgettext sees the translatable formats that are
-	 constructed on the fly.  */
-      YY_("syntax error, unexpected %s");
-      YY_("syntax error, unexpected %s, expecting %s");
-      YY_("syntax error, unexpected %s, expecting %s or %s");
-      YY_("syntax error, unexpected %s, expecting %s or %s or %s");
-      YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
-# endif
-      char *yyfmt;
-      char const *yyf;
-      static char const yyunexpected[] = "syntax error, unexpected %s";
-      static char const yyexpecting[] = ", expecting %s";
-      static char const yyor[] = " or %s";
-      char yyformat[sizeof yyunexpected
-		    + sizeof yyexpecting - 1
-		    + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
-		       * (sizeof yyor - 1))];
-      char const *yyprefix = yyexpecting;
-
-      /* Start YYX at -YYN if negative to avoid negative indexes in
-	 YYCHECK.  */
-      int yyxbegin = yyn < 0 ? -yyn : 0;
-
-      /* Stay within bounds of both yycheck and yytname.  */
-      int yychecklim = YYLAST - yyn + 1;
-      int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
-      int yycount = 1;
-
-      yyarg[0] = yytname[yytype];
-      yyfmt = yystpcpy (yyformat, yyunexpected);
-
-      for (yyx = yyxbegin; yyx < yyxend; ++yyx)
-	if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
-	  {
-	    if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
-	      {
-		yycount = 1;
-		yysize = yysize0;
-		yyformat[sizeof yyunexpected - 1] = '\0';
-		break;
-	      }
-	    yyarg[yycount++] = yytname[yyx];
-	    yysize1 = yysize + yytnamerr (0, yytname[yyx]);
-	    yysize_overflow |= (yysize1 < yysize);
-	    yysize = yysize1;
-	    yyfmt = yystpcpy (yyfmt, yyprefix);
-	    yyprefix = yyor;
-	  }
-
-      yyf = YY_(yyformat);
-      yysize1 = yysize + yystrlen (yyf);
-      yysize_overflow |= (yysize1 < yysize);
-      yysize = yysize1;
-
-      if (yysize_overflow)
-	return YYSIZE_MAXIMUM;
-
-      if (yyresult)
-	{
-	  /* Avoid sprintf, as that infringes on the user's name space.
-	     Don't have undefined behavior even if the translation
-	     produced a string with the wrong number of "%s"s.  */
-	  char *yyp = yyresult;
-	  int yyi = 0;
-	  while ((*yyp = *yyf) != '\0')
-	    {
-	      if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
-		{
-		  yyp += yytnamerr (yyp, yyarg[yyi++]);
-		  yyf += 2;
-		}
-	      else
-		{
-		  yyp++;
-		  yyf++;
-		}
-	    }
-	}
-      return yysize;
+          for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+            if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR
+                && !yytable_value_is_error (yytable[yyx + yyn]))
+              {
+                if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+                  {
+                    yycount = 1;
+                    yysize = yysize0;
+                    break;
+                  }
+                yyarg[yycount++] = yytname[yyx];
+                yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+                if (! (yysize <= yysize1
+                       && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
+                  return 2;
+                yysize = yysize1;
+              }
+        }
     }
+
+  switch (yycount)
+    {
+# define YYCASE_(N, S)                      \
+      case N:                               \
+        yyformat = S;                       \
+      break
+      YYCASE_(0, YY_("syntax error"));
+      YYCASE_(1, YY_("syntax error, unexpected %s"));
+      YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s"));
+      YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s"));
+      YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s"));
+      YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"));
+# undef YYCASE_
+    }
+
+  yysize1 = yysize + yystrlen (yyformat);
+  if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM))
+    return 2;
+  yysize = yysize1;
+
+  if (*yymsg_alloc < yysize)
+    {
+      *yymsg_alloc = 2 * yysize;
+      if (! (yysize <= *yymsg_alloc
+             && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM))
+        *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM;
+      return 1;
+    }
+
+  /* Avoid sprintf, as that infringes on the user's name space.
+     Don't have undefined behavior even if the translation
+     produced a string with the wrong number of "%s"s.  */
+  {
+    char *yyp = *yymsg;
+    int yyi = 0;
+    while ((*yyp = *yyformat) != '\0')
+      if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount)
+        {
+          yyp += yytnamerr (yyp, yyarg[yyi++]);
+          yyformat += 2;
+        }
+      else
+        {
+          yyp++;
+          yyformat++;
+        }
+  }
+  return 0;
 }
 #endif /* YYERROR_VERBOSE */
-
 
 /*-----------------------------------------------.
 | Release the memory associated to this symbol.  |
@@ -1359,6 +1402,7 @@
     }
 }
 
+
 /* Prevent warnings from -Wmissing-prototypes.  */
 #ifdef YYPARSE_PARAM
 #if defined __STDC__ || defined __cplusplus
@@ -1385,10 +1429,9 @@
 int yynerrs;
 
 
-
-/*-------------------------.
-| yyparse or yypush_parse.  |
-`-------------------------*/
+/*----------.
+| yyparse.  |
+`----------*/
 
 #ifdef YYPARSE_PARAM
 #if (defined __STDC__ || defined __C99__FUNC__ \
@@ -1412,8 +1455,6 @@
 #endif
 #endif
 {
-
-
     int yystate;
     /* Number of tokens to shift before error messages enabled.  */
     int yyerrstatus;
@@ -1568,7 +1609,7 @@
 
   /* First try to decide what to do without reference to lookahead token.  */
   yyn = yypact[yystate];
-  if (yyn == YYPACT_NINF)
+  if (yypact_value_is_default (yyn))
     goto yydefault;
 
   /* Not known => get a lookahead token if don't already have one.  */
@@ -1599,8 +1640,8 @@
   yyn = yytable[yyn];
   if (yyn <= 0)
     {
-      if (yyn == 0 || yyn == YYTABLE_NINF)
-	goto yyerrlab;
+      if (yytable_value_is_error (yyn))
+        goto yyerrlab;
       yyn = -yyn;
       goto yyreduce;
     }
@@ -1655,42 +1696,42 @@
     {
         case 4:
 
-    { is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; ;}
+    { is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; }
     break;
 
   case 5:
 
-    { free_list(*(yyvsp[(2) - (2)]), NULL); *(yyvsp[(2) - (2)]) = NULL; ;}
+    { free_list(*(yyvsp[(2) - (2)]), NULL); *(yyvsp[(2) - (2)]) = NULL; }
     break;
 
   case 6:
 
-    { is_typedef = 1; ;}
+    { is_typedef = 1; }
     break;
 
   case 7:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 8:
 
-    { is_typedef = 1; ;}
+    { is_typedef = 1; }
     break;
 
   case 9:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 14:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 15:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 16:
@@ -1704,12 +1745,12 @@
 		    current_name = NULL;
 		  }
 		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+		}
     break;
 
   case 17:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 19:
@@ -1720,7 +1761,7 @@
 			     is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
 		  current_name = NULL;
 		  (yyval) = (yyvsp[(1) - (1)]);
-		;}
+		}
     break;
 
   case 20:
@@ -1733,27 +1774,27 @@
 			     is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
 		  current_name = NULL;
 		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+		}
     break;
 
   case 21:
 
-    { (yyval) = (yyvsp[(4) - (4)]) ? (yyvsp[(4) - (4)]) : (yyvsp[(3) - (4)]) ? (yyvsp[(3) - (4)]) : (yyvsp[(2) - (4)]) ? (yyvsp[(2) - (4)]) : (yyvsp[(1) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]) ? (yyvsp[(4) - (4)]) : (yyvsp[(3) - (4)]) ? (yyvsp[(3) - (4)]) : (yyvsp[(2) - (4)]) ? (yyvsp[(2) - (4)]) : (yyvsp[(1) - (4)]); }
     break;
 
   case 22:
 
-    { decl_spec = NULL; ;}
+    { decl_spec = NULL; }
     break;
 
   case 24:
 
-    { decl_spec = *(yyvsp[(1) - (1)]); ;}
+    { decl_spec = *(yyvsp[(1) - (1)]); }
     break;
 
   case 25:
 
-    { decl_spec = *(yyvsp[(2) - (2)]); ;}
+    { decl_spec = *(yyvsp[(2) - (2)]); }
     break;
 
   case 26:
@@ -1762,97 +1803,82 @@
 		     is really irrelevant to the linkage.  */
 		  remove_node((yyvsp[(1) - (1)]));
 		  (yyval) = (yyvsp[(1) - (1)]);
-		;}
+		}
     break;
 
   case 31:
 
-    { is_extern = 1; (yyval) = (yyvsp[(1) - (1)]); ;}
+    { is_extern = 1; (yyval) = (yyvsp[(1) - (1)]); }
     break;
 
   case 32:
 
-    { is_extern = 0; (yyval) = (yyvsp[(1) - (1)]); ;}
+    { is_extern = 0; (yyval) = (yyvsp[(1) - (1)]); }
     break;
 
   case 37:
 
-    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_STRUCT; (yyval) = (yyvsp[(2) - (2)]); ;}
+    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_STRUCT; (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 38:
 
-    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_UNION; (yyval) = (yyvsp[(2) - (2)]); ;}
+    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_UNION; (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 39:
 
-    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_ENUM; (yyval) = (yyvsp[(2) - (2)]); ;}
+    { remove_node((yyvsp[(1) - (2)])); (*(yyvsp[(2) - (2)]))->tag = SYM_ENUM; (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 40:
 
-    { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
-		  r = copy_node(i); r->tag = SYM_STRUCT;
-		  r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
-		  add_symbol(i->string, SYM_STRUCT, s, is_extern);
-		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+    { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_STRUCT); (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 41:
 
-    { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
-		  r = copy_node(i); r->tag = SYM_UNION;
-		  r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
-		  add_symbol(i->string, SYM_UNION, s, is_extern);
-		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+    { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_UNION); (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 42:
 
-    { struct string_list *s = *(yyvsp[(3) - (3)]), *i = *(yyvsp[(2) - (3)]), *r;
-		  r = copy_node(i); r->tag = SYM_ENUM;
-		  r->next = (*(yyvsp[(1) - (3)]))->next; *(yyvsp[(3) - (3)]) = r; (*(yyvsp[(1) - (3)]))->next = NULL;
-		  add_symbol(i->string, SYM_ENUM, s, is_extern);
-		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+    { record_compound((yyvsp[(1) - (3)]), (yyvsp[(2) - (3)]), (yyvsp[(3) - (3)]), SYM_ENUM); (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 43:
 
-    { add_symbol(NULL, SYM_ENUM, NULL, 0); (yyval) = (yyvsp[(2) - (2)]); ;}
+    { add_symbol(NULL, SYM_ENUM, NULL, 0); (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 44:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 45:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 56:
 
-    { (*(yyvsp[(1) - (1)]))->tag = SYM_TYPEDEF; (yyval) = (yyvsp[(1) - (1)]); ;}
+    { (*(yyvsp[(1) - (1)]))->tag = SYM_TYPEDEF; (yyval) = (yyvsp[(1) - (1)]); }
     break;
 
   case 57:
 
-    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
     break;
 
   case 58:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 61:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 65:
@@ -1860,12 +1886,12 @@
     { /* restrict has no effect in prototypes so ignore it */
 		  remove_node((yyvsp[(1) - (1)]));
 		  (yyval) = (yyvsp[(1) - (1)]);
-		;}
+		}
     break;
 
   case 66:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 68:
@@ -1877,97 +1903,97 @@
 		    current_name = (*(yyvsp[(1) - (1)]))->string;
 		    (yyval) = (yyvsp[(1) - (1)]);
 		  }
-		;}
+		}
     break;
 
   case 69:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 70:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 71:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 72:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 73:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 74:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 78:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 79:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 80:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 81:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 82:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 83:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 85:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 86:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 89:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 90:
 
-    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
     break;
 
   case 91:
 
-    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
     break;
 
   case 93:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 94:
@@ -1976,39 +2002,39 @@
 		     private parameter names.  */
 		  remove_node((yyvsp[(1) - (1)]));
 		  (yyval) = (yyvsp[(1) - (1)]);
-		;}
+		}
     break;
 
   case 95:
 
     { remove_node((yyvsp[(1) - (1)]));
 		  (yyval) = (yyvsp[(1) - (1)]);
-		;}
+		}
     break;
 
   case 96:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 97:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 98:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 99:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 100:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 101:
@@ -2017,87 +2043,87 @@
 		  *(yyvsp[(2) - (3)]) = NULL;
 		  add_symbol(current_name, SYM_NORMAL, decl, is_extern);
 		  (yyval) = (yyvsp[(3) - (3)]);
-		;}
+		}
     break;
 
   case 102:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 104:
 
-    { remove_list((yyvsp[(2) - (2)]), &(*(yyvsp[(1) - (2)]))->next); (yyval) = (yyvsp[(2) - (2)]); ;}
+    { remove_list((yyvsp[(2) - (2)]), &(*(yyvsp[(1) - (2)]))->next); (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 105:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 106:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 107:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 110:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 111:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 112:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 113:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 116:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 117:
 
-    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]) ? (yyvsp[(2) - (2)]) : (yyvsp[(1) - (2)]); }
     break;
 
   case 118:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 120:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 121:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 123:
 
-    { (yyval) = (yyvsp[(3) - (3)]); ;}
+    { (yyval) = (yyvsp[(3) - (3)]); }
     break;
 
   case 124:
 
-    { (yyval) = (yyvsp[(4) - (4)]); ;}
+    { (yyval) = (yyvsp[(4) - (4)]); }
     break;
 
   case 127:
@@ -2105,7 +2131,7 @@
     {
 			const char *name = strdup((*(yyvsp[(1) - (1)]))->string);
 			add_symbol(name, SYM_ENUM_CONST, NULL, 0);
-		;}
+		}
     break;
 
   case 128:
@@ -2114,28 +2140,39 @@
 			const char *name = strdup((*(yyvsp[(1) - (3)]))->string);
 			struct string_list *expr = copy_list_range(*(yyvsp[(3) - (3)]), *(yyvsp[(2) - (3)]));
 			add_symbol(name, SYM_ENUM_CONST, expr, 0);
-		;}
+		}
     break;
 
   case 129:
 
-    { (yyval) = (yyvsp[(2) - (2)]); ;}
+    { (yyval) = (yyvsp[(2) - (2)]); }
     break;
 
   case 130:
 
-    { (yyval) = NULL; ;}
+    { (yyval) = NULL; }
     break;
 
   case 132:
 
-    { export_symbol((*(yyvsp[(3) - (5)]))->string); (yyval) = (yyvsp[(5) - (5)]); ;}
+    { export_symbol((*(yyvsp[(3) - (5)]))->string); (yyval) = (yyvsp[(5) - (5)]); }
     break;
 
 
 
       default: break;
     }
+  /* User semantic actions sometimes alter yychar, and that requires
+     that yytoken be updated with the new translation.  We take the
+     approach of translating immediately before every use of yytoken.
+     One alternative is translating here after every semantic action,
+     but that translation would be missed if the semantic action invokes
+     YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or
+     if it invokes YYBACKUP.  In the case of YYABORT or YYACCEPT, an
+     incorrect destructor might then be invoked immediately.  In the
+     case of YYERROR or YYBACKUP, subsequent parser actions might lead
+     to an incorrect destructor call or verbose syntax error message
+     before the lookahead is translated.  */
   YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
 
   YYPOPSTACK (yylen);
@@ -2163,6 +2200,10 @@
 | yyerrlab -- here on detecting error |
 `------------------------------------*/
 yyerrlab:
+  /* Make sure we have latest lookahead translation.  See comments at
+     user semantic actions for why this is necessary.  */
+  yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar);
+
   /* If not already recovering from an error, report this error.  */
   if (!yyerrstatus)
     {
@@ -2170,37 +2211,36 @@
 #if ! YYERROR_VERBOSE
       yyerror (YY_("syntax error"));
 #else
+# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \
+                                        yyssp, yytoken)
       {
-	YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
-	if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
-	  {
-	    YYSIZE_T yyalloc = 2 * yysize;
-	    if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
-	      yyalloc = YYSTACK_ALLOC_MAXIMUM;
-	    if (yymsg != yymsgbuf)
-	      YYSTACK_FREE (yymsg);
-	    yymsg = (char *) YYSTACK_ALLOC (yyalloc);
-	    if (yymsg)
-	      yymsg_alloc = yyalloc;
-	    else
-	      {
-		yymsg = yymsgbuf;
-		yymsg_alloc = sizeof yymsgbuf;
-	      }
-	  }
-
-	if (0 < yysize && yysize <= yymsg_alloc)
-	  {
-	    (void) yysyntax_error (yymsg, yystate, yychar);
-	    yyerror (yymsg);
-	  }
-	else
-	  {
-	    yyerror (YY_("syntax error"));
-	    if (yysize != 0)
-	      goto yyexhaustedlab;
-	  }
+        char const *yymsgp = YY_("syntax error");
+        int yysyntax_error_status;
+        yysyntax_error_status = YYSYNTAX_ERROR;
+        if (yysyntax_error_status == 0)
+          yymsgp = yymsg;
+        else if (yysyntax_error_status == 1)
+          {
+            if (yymsg != yymsgbuf)
+              YYSTACK_FREE (yymsg);
+            yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc);
+            if (!yymsg)
+              {
+                yymsg = yymsgbuf;
+                yymsg_alloc = sizeof yymsgbuf;
+                yysyntax_error_status = 2;
+              }
+            else
+              {
+                yysyntax_error_status = YYSYNTAX_ERROR;
+                yymsgp = yymsg;
+              }
+          }
+        yyerror (yymsgp);
+        if (yysyntax_error_status == 2)
+          goto yyexhaustedlab;
       }
+# undef YYSYNTAX_ERROR
 #endif
     }
 
@@ -2259,7 +2299,7 @@
   for (;;)
     {
       yyn = yypact[yystate];
-      if (yyn != YYPACT_NINF)
+      if (!yypact_value_is_default (yyn))
 	{
 	  yyn += YYTERROR;
 	  if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
@@ -2318,8 +2358,13 @@
 
 yyreturn:
   if (yychar != YYEMPTY)
-     yydestruct ("Cleanup: discarding lookahead",
-		 yytoken, &yylval);
+    {
+      /* Make sure we have latest lookahead translation.  See comments at
+         user semantic actions for why this is necessary.  */
+      yytoken = YYTRANSLATE (yychar);
+      yydestruct ("Cleanup: discarding lookahead",
+                  yytoken, &yylval);
+    }
   /* Do not reclaim the symbols of the rule which action triggered
      this YYABORT or YYACCEPT.  */
   YYPOPSTACK (yylen);
diff --git a/scripts/genksyms/parse.tab.h_shipped b/scripts/genksyms/parse.tab.h_shipped
index 350c2b4..93240a3 100644
--- a/scripts/genksyms/parse.tab.h_shipped
+++ b/scripts/genksyms/parse.tab.h_shipped
@@ -1,9 +1,8 @@
-/* A Bison parser, made by GNU Bison 2.4.3.  */
+/* A Bison parser, made by GNU Bison 2.5.  */
 
-/* Skeleton interface for Bison's Yacc-like parsers in C
+/* Bison interface for Yacc-like parsers in C
    
-      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-   2009, 2010 Free Software Foundation, Inc.
+      Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc.
    
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y
index ba5c242..23c3999 100644
--- a/scripts/genksyms/parse.y
+++ b/scripts/genksyms/parse.y
@@ -51,6 +51,25 @@
   free_list(b, e);
 }
 
+/* Record definition of a struct/union/enum */
+static void record_compound(struct string_list **keyw,
+		       struct string_list **ident,
+		       struct string_list **body,
+		       enum symbol_type type)
+{
+	struct string_list *b = *body, *i = *ident, *r;
+
+	if (i->in_source_file) {
+		remove_node(keyw);
+		(*ident)->tag = type;
+		remove_list(body, ident);
+		return;
+	}
+	r = copy_node(i); r->tag = type;
+	r->next = (*keyw)->next; *body = r; (*keyw)->next = NULL;
+	add_symbol(i->string, type, b, is_extern);
+}
+
 %}
 
 %token ASM_KEYW
@@ -215,26 +234,11 @@
 
 	/* Full definitions of an s/u/e.  Record it.  */
 	| STRUCT_KEYW IDENT class_body
-		{ struct string_list *s = *$3, *i = *$2, *r;
-		  r = copy_node(i); r->tag = SYM_STRUCT;
-		  r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
-		  add_symbol(i->string, SYM_STRUCT, s, is_extern);
-		  $$ = $3;
-		}
+		{ record_compound($1, $2, $3, SYM_STRUCT); $$ = $3; }
 	| UNION_KEYW IDENT class_body
-		{ struct string_list *s = *$3, *i = *$2, *r;
-		  r = copy_node(i); r->tag = SYM_UNION;
-		  r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
-		  add_symbol(i->string, SYM_UNION, s, is_extern);
-		  $$ = $3;
-		}
+		{ record_compound($1, $2, $3, SYM_UNION); $$ = $3; }
 	| ENUM_KEYW IDENT enum_body
-		{ struct string_list *s = *$3, *i = *$2, *r;
-		  r = copy_node(i); r->tag = SYM_ENUM;
-		  r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
-		  add_symbol(i->string, SYM_ENUM, s, is_extern);
-		  $$ = $3;
-		}
+		{ record_compound($1, $2, $3, SYM_ENUM); $$ = $3; }
 	/*
 	 * Anonymous enum definition. Tell add_symbol() to restart its counter.
 	 */
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 82d2eb2..ba573fe 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -33,17 +33,9 @@
 	$(Q)mkdir -p include/generated
 	$< --$@ $(Kconfig)
 
-# if no path is given, then use src directory to find file
-ifdef LSMOD
-LSMOD_F := $(LSMOD)
-ifeq ($(findstring /,$(LSMOD)),)
-  LSMOD_F := $(objtree)/$(LSMOD)
-endif
-endif
-
-localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
+	$(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
 	$(Q)if [ -f .config ]; then 					\
 			cmp -s .tmp.config .config ||			\
 			(mv -f .config .config.old.1;			\
@@ -56,22 +48,6 @@
 	fi
 	$(Q)rm -f .tmp.config
 
-localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
-	$(Q)sed -i s/=m/=y/ .tmp.config
-	$(Q)if [ -f .config ]; then					\
-			cmp -s .tmp.config .config ||			\
-			(mv -f .config .config.old.1;			\
-			 mv -f .tmp.config .config;			\
-			 $(obj)/conf --silentoldconfig $(Kconfig);	\
-			 mv -f .config.old.1 .config.old)		\
-	else								\
-			mv -f .tmp.config .config;			\
-			$(obj)/conf --silentoldconfig $(Kconfig);	\
-	fi
-	$(Q)rm -f .tmp.config
-
 # Create new linux.pot file
 # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
 # The symlink is used to repair a deficiency in arch/um
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 59b667c..5a58965 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -503,17 +503,6 @@
 			fprintf(fp, "#define %s%s%s 1\n",
 			    CONFIG_, sym->name, suffix);
 		}
-		/*
-		 * Generate the __enabled_CONFIG_* and
-		 * __enabled_CONFIG_*_MODULE macros for use by the
-		 * IS_{ENABLED,BUILTIN,MODULE} macros. The _MODULE variant is
-		 * generated even for booleans so that the IS_ENABLED() macro
-		 * works.
-		 */
-		fprintf(fp, "#define __enabled_" CONFIG_ "%s %d\n",
-				sym->name, (*value == 'y'));
-		fprintf(fp, "#define __enabled_" CONFIG_ "%s_MODULE %d\n",
-				sym->name, (*value == 'm'));
 		break;
 	}
 	case S_HEX: {
@@ -565,6 +554,35 @@
 };
 
 /*
+ * Generate the __enabled_CONFIG_* and __enabled_CONFIG_*_MODULE macros for
+ * use by the IS_{ENABLED,BUILTIN,MODULE} macros. The _MODULE variant is
+ * generated even for booleans so that the IS_ENABLED() macro works.
+ */
+static void
+header_print__enabled_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg)
+{
+
+	switch (sym->type) {
+	case S_BOOLEAN:
+	case S_TRISTATE: {
+		fprintf(fp, "#define __enabled_" CONFIG_ "%s %d\n",
+		    sym->name, (*value == 'y'));
+		fprintf(fp, "#define __enabled_" CONFIG_ "%s_MODULE %d\n",
+		    sym->name, (*value == 'm'));
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+static struct conf_printer header__enabled_printer_cb =
+{
+	.print_symbol = header_print__enabled_symbol,
+	.print_comment = header_print_comment,
+};
+
+/*
  * Tristate printer
  *
  * This printer is used when generating the `include/config/tristate.conf' file.
@@ -945,11 +963,16 @@
 	conf_write_heading(out_h, &header_printer_cb, NULL);
 
 	for_all_symbols(i, sym) {
-		sym_calc_value(sym);
-		if (!(sym->flags & SYMBOL_WRITE) || !sym->name)
+		if (!sym->name)
 			continue;
 
-		/* write symbol to auto.conf, tristate and header files */
+		sym_calc_value(sym);
+
+		conf_write_symbol(out_h, sym, &header__enabled_printer_cb, NULL);
+
+		if (!(sym->flags & SYMBOL_WRITE))
+			continue;
+
 		conf_write_symbol(out, sym, &kconfig_printer_cb, (void *)1);
 
 		conf_write_symbol(tristate, sym, &tristate_printer_cb, (void *)1);
diff --git a/scripts/kconfig/lxdialog/textbox.c b/scripts/kconfig/lxdialog/textbox.c
index c704712..154c2dd 100644
--- a/scripts/kconfig/lxdialog/textbox.c
+++ b/scripts/kconfig/lxdialog/textbox.c
@@ -320,7 +320,6 @@
  */
 static void print_line(WINDOW * win, int row, int width)
 {
-	int y, x;
 	char *line;
 
 	line = get_line();
@@ -329,10 +328,10 @@
 	waddch(win, ' ');
 	waddnstr(win, line, MIN(strlen(line), width - 2));
 
-	getyx(win, y, x);
 	/* Clear 'residue' of previous line */
 #if OLD_NCURSES
 	{
+		int x = getcurx(win);
 		int i;
 		for (i = 0; i < width - x; i++)
 			waddch(win, ' ');
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 820d2b6..19e200d 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -15,6 +15,7 @@
 #include <stdarg.h>
 #include <stdlib.h>
 #include <string.h>
+#include <signal.h>
 #include <unistd.h>
 #include <locale.h>
 
@@ -272,6 +273,7 @@
 static int child_count;
 static int single_menu_mode;
 static int show_all_options;
+static int saved_x, saved_y;
 
 static void conf(struct menu *menu);
 static void conf_choice(struct menu *menu);
@@ -792,9 +794,54 @@
 	}
 }
 
+static int handle_exit(void)
+{
+	int res;
+
+	dialog_clear();
+	if (conf_get_changed())
+		res = dialog_yesno(NULL,
+				   _("Do you wish to save your new configuration ?\n"
+				     "<ESC><ESC> to continue."),
+				   6, 60);
+	else
+		res = -1;
+
+	end_dialog(saved_x, saved_y);
+
+	switch (res) {
+	case 0:
+		if (conf_write(filename)) {
+			fprintf(stderr, _("\n\n"
+					  "Error while writing of the configuration.\n"
+					  "Your configuration changes were NOT saved."
+					  "\n\n"));
+			return 1;
+		}
+		/* fall through */
+	case -1:
+		printf(_("\n\n"
+			 "*** End of the configuration.\n"
+			 "*** Execute 'make' to start the build or try 'make help'."
+			 "\n\n"));
+		res = 0;
+		break;
+	default:
+		fprintf(stderr, _("\n\n"
+				  "Your configuration changes were NOT saved."
+				  "\n\n"));
+	}
+
+	return res;
+}
+
+static void sig_handler(int signo)
+{
+	exit(handle_exit());
+}
+
 int main(int ac, char **av)
 {
-	int saved_x, saved_y;
 	char *mode;
 	int res;
 
@@ -802,6 +849,8 @@
 	bindtextdomain(PACKAGE, LOCALEDIR);
 	textdomain(PACKAGE);
 
+	signal(SIGINT, sig_handler);
+
 	conf_parse(av[1]);
 	conf_read(NULL);
 
@@ -823,40 +872,9 @@
 	set_config_filename(conf_get_configname());
 	do {
 		conf(&rootmenu);
-		dialog_clear();
-		if (conf_get_changed())
-			res = dialog_yesno(NULL,
-					   _("Do you wish to save your "
-					     "new configuration?\n"
-					     "<ESC><ESC> to continue."),
-					   6, 60);
-		else
-			res = -1;
+		res = handle_exit();
 	} while (res == KEY_ESC);
-	end_dialog(saved_x, saved_y);
 
-	switch (res) {
-	case 0:
-		if (conf_write(filename)) {
-			fprintf(stderr, _("\n\n"
-				"Error while writing of the configuration.\n"
-				"Your configuration changes were NOT saved."
-				"\n\n"));
-			return 1;
-		}
-		/* fall through */
-	case -1:
-		printf(_("\n\n"
-			"*** End of the configuration.\n"
-			"*** Execute 'make' to start the build or try 'make help'."
-			"\n\n"));
-		break;
-	default:
-		fprintf(stderr, _("\n\n"
-			"Your configuration changes were NOT saved."
-			"\n\n"));
-	}
-
-	return 0;
+	return res;
 }
 
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index d660086..8c2a97e 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -10,8 +10,7 @@
 
 #include "lkc.h"
 
-static const char nohelp_text[] = N_(
-	"There is no help available for this option.\n");
+static const char nohelp_text[] = "There is no help available for this option.";
 
 struct menu rootmenu;
 static struct menu **last_entry_ptr;
@@ -595,16 +594,14 @@
 void menu_get_ext_help(struct menu *menu, struct gstr *help)
 {
 	struct symbol *sym = menu->sym;
+	const char *help_text = nohelp_text;
 
 	if (menu_has_help(menu)) {
-		if (sym->name) {
+		if (sym->name)
 			str_printf(help, "%s%s:\n\n", CONFIG_, sym->name);
-			str_append(help, _(menu_get_help(menu)));
-			str_append(help, "\n");
-		}
-	} else {
-		str_append(help, nohelp_text);
+		help_text = menu_get_help(menu);
 	}
+	str_printf(help, "%s\n", _(help_text));
 	if (sym)
 		get_symbol_str(help, sym);
 }
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index 39ca1f1..73070cb 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -182,8 +182,6 @@
 "This feature depends on another which\n"
 "has been configured as a module.\n"
 "As a result, this feature will be built as a module."),
-nohelp_text[] = N_(
-"There is no help available for this option.\n"),
 load_config_text[] = N_(
 "Enter the name of the configuration file you wish to load.\n"
 "Accept the name shown to restore the configuration you\n"
@@ -280,6 +278,9 @@
 /* the currently selected button */
 const char *current_instructions = menu_instructions;
 
+static char *dialog_input_result;
+static int dialog_input_result_len;
+
 static void conf(struct menu *menu);
 static void conf_choice(struct menu *menu);
 static void conf_string(struct menu *menu);
@@ -695,7 +696,6 @@
 {
 	struct symbol **sym_arr;
 	struct gstr res;
-	char dialog_input_result[100];
 	char *dialog_input;
 	int dres;
 again:
@@ -703,7 +703,7 @@
 			_("Search Configuration Parameter"),
 			_("Enter " CONFIG_ " (sub)string to search for "
 				"(with or without \"" CONFIG_ "\")"),
-			"", dialog_input_result, 99);
+			"", &dialog_input_result, &dialog_input_result_len);
 	switch (dres) {
 	case 0:
 		break;
@@ -1348,7 +1348,6 @@
 static void conf_string(struct menu *menu)
 {
 	const char *prompt = menu_get_prompt(menu);
-	char dialog_input_result[256];
 
 	while (1) {
 		int res;
@@ -1371,8 +1370,8 @@
 				prompt ? _(prompt) : _("Main Menu"),
 				heading,
 				sym_get_string_value(menu->sym),
-				dialog_input_result,
-				sizeof(dialog_input_result));
+				&dialog_input_result,
+				&dialog_input_result_len);
 		switch (res) {
 		case 0:
 			if (sym_set_string_value(menu->sym,
@@ -1392,14 +1391,13 @@
 
 static void conf_load(void)
 {
-	char dialog_input_result[256];
 	while (1) {
 		int res;
 		res = dialog_inputbox(main_window,
 				NULL, load_config_text,
 				filename,
-				dialog_input_result,
-				sizeof(dialog_input_result));
+				&dialog_input_result,
+				&dialog_input_result_len);
 		switch (res) {
 		case 0:
 			if (!dialog_input_result[0])
@@ -1424,14 +1422,13 @@
 
 static void conf_save(void)
 {
-	char dialog_input_result[256];
 	while (1) {
 		int res;
 		res = dialog_inputbox(main_window,
 				NULL, save_config_text,
 				filename,
-				dialog_input_result,
-				sizeof(dialog_input_result));
+				&dialog_input_result,
+				&dialog_input_result_len);
 		switch (res) {
 		case 0:
 			if (!dialog_input_result[0])
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index f8137b3..3b18dd8 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -356,7 +356,7 @@
 
 int dialog_inputbox(WINDOW *main_window,
 		const char *title, const char *prompt,
-		const char *init, char *result, int result_len)
+		const char *init, char **resultp, int *result_len)
 {
 	int prompt_lines = 0;
 	int prompt_width = 0;
@@ -367,7 +367,13 @@
 	int i, x, y;
 	int res = -1;
 	int cursor_position = strlen(init);
+	int cursor_form_win;
+	char *result = *resultp;
 
+	if (strlen(init)+1 > *result_len) {
+		*result_len = strlen(init)+1;
+		*resultp = result = realloc(result, *result_len);
+	}
 
 	/* find the widest line of msg: */
 	prompt_lines = get_line_no(prompt);
@@ -384,7 +390,7 @@
 	y = (LINES-(prompt_lines+4))/2;
 	x = (COLS-(prompt_width+4))/2;
 
-	strncpy(result, init, result_len);
+	strncpy(result, init, *result_len);
 
 	/* create the windows */
 	win = newwin(prompt_lines+6, prompt_width+7, y, x);
@@ -405,7 +411,9 @@
 	fill_window(prompt_win, prompt);
 
 	mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
-	mvwprintw(form_win, 0, 0, "%s", result);
+	cursor_form_win = min(cursor_position, prompt_width-1);
+	mvwprintw(form_win, 0, 0, "%s",
+		  result + cursor_position-cursor_form_win);
 
 	/* create panels */
 	panel = new_panel(win);
@@ -431,6 +439,8 @@
 						&result[cursor_position],
 						len-cursor_position+1);
 				cursor_position--;
+				cursor_form_win--;
+				len--;
 			}
 			break;
 		case KEY_DC:
@@ -438,38 +448,63 @@
 				memmove(&result[cursor_position],
 						&result[cursor_position+1],
 						len-cursor_position+1);
+				len--;
 			}
 			break;
 		case KEY_UP:
 		case KEY_RIGHT:
-			if (cursor_position < len &&
-			    cursor_position < min(result_len, prompt_width))
+			if (cursor_position < len) {
 				cursor_position++;
+				cursor_form_win++;
+			}
 			break;
 		case KEY_DOWN:
 		case KEY_LEFT:
-			if (cursor_position > 0)
+			if (cursor_position > 0) {
 				cursor_position--;
+				cursor_form_win--;
+			}
+			break;
+		case KEY_HOME:
+			cursor_position = 0;
+			cursor_form_win = 0;
+			break;
+		case KEY_END:
+			cursor_position = len;
+			cursor_form_win = min(cursor_position, prompt_width-1);
 			break;
 		default:
-			if ((isgraph(res) || isspace(res)) &&
-					len-2 < result_len) {
+			if ((isgraph(res) || isspace(res))) {
+				/* one for new char, one for '\0' */
+				if (len+2 > *result_len) {
+					*result_len = len+2;
+					*resultp = result = realloc(result,
+								*result_len);
+				}
 				/* insert the char at the proper position */
 				memmove(&result[cursor_position+1],
 						&result[cursor_position],
-						len+1);
+						len-cursor_position+1);
 				result[cursor_position] = res;
 				cursor_position++;
+				cursor_form_win++;
+				len++;
 			} else {
-				mvprintw(0, 0, "unknow key: %d\n", res);
+				mvprintw(0, 0, "unknown key: %d\n", res);
 			}
 			break;
 		}
+		if (cursor_form_win < 0)
+			cursor_form_win = 0;
+		else if (cursor_form_win > prompt_width-1)
+			cursor_form_win = prompt_width-1;
+
 		wmove(form_win, 0, 0);
 		wclrtoeol(form_win);
 		mvwprintw(form_win, 0, 0, "%*s", prompt_width, " ");
-		mvwprintw(form_win, 0, 0, "%s", result);
-		wmove(form_win, 0, cursor_position);
+		mvwprintw(form_win, 0, 0, "%s",
+			result + cursor_position-cursor_form_win);
+		wmove(form_win, 0, cursor_form_win);
 		touchwin(win);
 		refresh_all_windows(main_window);
 
diff --git a/scripts/kconfig/nconf.h b/scripts/kconfig/nconf.h
index 58fbda8..0d52617 100644
--- a/scripts/kconfig/nconf.h
+++ b/scripts/kconfig/nconf.h
@@ -89,7 +89,7 @@
 int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...);
 int dialog_inputbox(WINDOW *main_window,
 		const char *title, const char *prompt,
-		const char *init, char *result, int result_len);
+		const char *init, char **resultp, int *result_len);
 void refresh_all_windows(WINDOW *main_window);
 void show_scroll_win(WINDOW *main_window,
 		const char *title,
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index a4fe923..ec7afce 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -43,6 +43,7 @@
 #    make oldconfig
 #
 use strict;
+use Getopt::Long;
 
 my $config = ".config";
 
@@ -112,10 +113,17 @@
 
 find_config;
 
+# Parse options
+my $localmodconfig = 0;
+my $localyesconfig = 0;
+
+GetOptions("localmodconfig" => \$localmodconfig,
+	   "localyesconfig" => \$localyesconfig);
+
 # Get the build source and top level Kconfig file (passed in)
 my $ksource = $ARGV[0];
 my $kconfig = $ARGV[1];
-my $lsmod_file = $ARGV[2];
+my $lsmod_file = $ENV{'LSMOD'};
 
 my @makefiles = `find $ksource -name Makefile 2>/dev/null`;
 chomp @makefiles;
@@ -296,7 +304,11 @@
 
 if (defined($lsmod_file)) {
     if ( ! -f $lsmod_file) {
-	die "$lsmod_file not found";
+	if ( -f $ENV{'objtree'}."/".$lsmod_file) {
+	    $lsmod_file = $ENV{'objtree'}."/".$lsmod_file;
+	} else {
+		die "$lsmod_file not found";
+	}
     }
     if ( -x $lsmod_file) {
 	# the file is executable, run it
@@ -421,7 +433,11 @@
 
     if (/^(CONFIG.*)=(m|y)/) {
 	if (defined($configs{$1})) {
-	    $setconfigs{$1} = $2;
+	    if ($localyesconfig) {
+	        $setconfigs{$1} = 'y';
+	    } else {
+	        $setconfigs{$1} = $2;
+	    }
 	} elsif ($2 eq "m") {
 	    print "# $1 is not set\n";
 	    next;
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index a509ff8..2bd594e 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1849,6 +1849,12 @@
 	buf_printf(b, "};\n");
 }
 
+static void add_intree_flag(struct buffer *b, int is_intree)
+{
+	if (is_intree)
+		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
+}
+
 static void add_staging_flag(struct buffer *b, const char *name)
 {
 	static const char *staging_dir = "drivers/staging";
@@ -2169,6 +2175,7 @@
 		buf.pos = 0;
 
 		add_header(&buf, mod);
+		add_intree_flag(&buf, !external_module);
 		add_staging_flag(&buf, mod->name);
 		err |= add_versions(&buf, mod);
 		add_depends(&buf, mod, modules);
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 75c5d24f1..38f6617 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -129,7 +129,7 @@
 	-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL                      \
 	-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
 	--extra=+f --c-kinds=+px                                \
-	--regex-asm='/^ENTRY\(([^)]*)\).*/\1/'                  \
+	--regex-asm='/^(ENTRY|_GLOBAL)\(([^)]*)\).*/\2/'        \
 	--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
 	--regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/'		\
 	--regex-c++='/^DEFINE_EVENT\([^,)]*, *([^,)]*).*/trace_\1/'
@@ -151,7 +151,7 @@
 emacs()
 {
 	all_sources | xargs $1 -a                               \
-	--regex='/^ENTRY(\([^)]*\)).*/\1/'                      \
+	--regex='/^(ENTRY|_GLOBAL)(\([^)]*\)).*/\2/'            \
 	--regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/'   \
 	--regex='/^TRACE_EVENT(\([^,)]*\).*/trace_\1/'		\
 	--regex='/^DEFINE_EVENT([^,)]*, *\([^,)]*\).*/trace_\1/'
diff --git a/security/keys/encrypted-keys/Makefile b/security/keys/encrypted-keys/Makefile
index 6bc7a86..d6f8433 100644
--- a/security/keys/encrypted-keys/Makefile
+++ b/security/keys/encrypted-keys/Makefile
@@ -2,5 +2,9 @@
 # Makefile for encrypted keys
 #
 
-obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o
-obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o
+obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o
+
+encrypted-keys-y := encrypted.o ecryptfs_format.o
+masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
+masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
+encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c
index dcc843c..41144f7 100644
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -444,7 +444,7 @@
 		goto out;
 
 	if (IS_ERR(mkey)) {
-		int ret = PTR_ERR(epayload);
+		int ret = PTR_ERR(mkey);
 
 		if (ret == -ENOTSUPP)
 			pr_info("encrypted_key: key %s not supported",
diff --git a/security/keys/encrypted-keys/encrypted.h b/security/keys/encrypted-keys/encrypted.h
index b6ade89..8136a2d 100644
--- a/security/keys/encrypted-keys/encrypted.h
+++ b/security/keys/encrypted-keys/encrypted.h
@@ -2,7 +2,8 @@
 #define __ENCRYPTED_KEY_H
 
 #define ENCRYPTED_DEBUG 0
-#ifdef CONFIG_TRUSTED_KEYS
+#if defined(CONFIG_TRUSTED_KEYS) || \
+  (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE))
 extern struct key *request_trusted_key(const char *trusted_desc,
 				       u8 **master_key, size_t *master_keylen);
 #else
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 5b366d7..69ff52c 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -102,7 +102,8 @@
 		key->expiry = 0;
 	}
 
-	kfree_rcu(zap, rcu);
+	if (zap)
+		kfree_rcu(zap, rcu);
 
 error:
 	return ret;
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index e545b9f..1126c10 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -80,6 +80,7 @@
 #include <linux/posix-timers.h>
 #include <linux/syslog.h>
 #include <linux/user_namespace.h>
+#include <linux/export.h>
 
 #include "avc.h"
 #include "objsec.h"
diff --git a/security/selinux/netlink.c b/security/selinux/netlink.c
index ce3f481..161e01a 100644
--- a/security/selinux/netlink.c
+++ b/security/selinux/netlink.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/skbuff.h>
 #include <linux/netlink.h>
 #include <linux/selinux_netlink.h>
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 6aceef5..5c32f36 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -102,9 +102,6 @@
 
 const char *smack_cipso_option = SMACK_CIPSO_OPTION;
 
-
-#define	SEQ_READ_FINISHED	((loff_t)-1)
-
 /*
  * Values for parsing cipso rules
  * SMK_DIGITLEN: Length of a digit field in a rule.
@@ -357,10 +354,12 @@
 
 	rc = count;
 	/*
+	 * If this is "load" as opposed to "load-self" and a new rule
+	 * it needs to get added for reporting.
 	 * smk_set_access returns true if there was already a rule
 	 * for the subject/object pair, and false if it was new.
 	 */
-	if (!smk_set_access(rule, rule_list, rule_lock)) {
+	if (load && !smk_set_access(rule, rule_list, rule_lock)) {
 		smlp = kzalloc(sizeof(*smlp), GFP_KERNEL);
 		if (smlp != NULL) {
 			smlp->smk_rule = rule;
@@ -377,12 +376,12 @@
 	return rc;
 }
 
-
 /*
- * Seq_file read operations for /smack/load
+ * Core logic for smackfs seq list operations.
  */
 
-static void *load_seq_start(struct seq_file *s, loff_t *pos)
+static void *smk_seq_start(struct seq_file *s, loff_t *pos,
+				struct list_head *head)
 {
 	struct list_head *list;
 
@@ -390,7 +389,7 @@
 	 * This is 0 the first time through.
 	 */
 	if (s->index == 0)
-		s->private = &smack_rule_list;
+		s->private = head;
 
 	if (s->private == NULL)
 		return NULL;
@@ -404,11 +403,12 @@
 	return list;
 }
 
-static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos,
+				struct list_head *head)
 {
 	struct list_head *list = v;
 
-	if (list_is_last(list, &smack_rule_list)) {
+	if (list_is_last(list, head)) {
 		s->private = NULL;
 		return NULL;
 	}
@@ -416,6 +416,25 @@
 	return list->next;
 }
 
+static void smk_seq_stop(struct seq_file *s, void *v)
+{
+	/* No-op */
+}
+
+/*
+ * Seq_file read operations for /smack/load
+ */
+
+static void *load_seq_start(struct seq_file *s, loff_t *pos)
+{
+	return smk_seq_start(s, pos, &smack_rule_list);
+}
+
+static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	return smk_seq_next(s, v, pos, &smack_rule_list);
+}
+
 static int load_seq_show(struct seq_file *s, void *v)
 {
 	struct list_head *list = v;
@@ -446,16 +465,11 @@
 	return 0;
 }
 
-static void load_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations load_seq_ops = {
 	.start = load_seq_start,
 	.next  = load_seq_next,
 	.show  = load_seq_show,
-	.stop  = load_seq_stop,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -574,28 +588,12 @@
 
 static void *cipso_seq_start(struct seq_file *s, loff_t *pos)
 {
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&smack_known_list))
-		return NULL;
-
-	return smack_known_list.next;
+	return smk_seq_start(s, pos, &smack_known_list);
 }
 
 static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct list_head  *list = v;
-
-	/*
-	 * labels with no associated cipso value wont be printed
-	 * in cipso_seq_show
-	 */
-	if (list_is_last(list, &smack_known_list)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-
-	return list->next;
+	return smk_seq_next(s, v, pos, &smack_known_list);
 }
 
 /*
@@ -634,16 +632,11 @@
 	return 0;
 }
 
-static void cipso_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations cipso_seq_ops = {
 	.start = cipso_seq_start,
-	.stop  = cipso_seq_stop,
 	.next  = cipso_seq_next,
 	.show  = cipso_seq_show,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -788,23 +781,12 @@
 
 static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos)
 {
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&smk_netlbladdr_list))
-		return NULL;
-	return smk_netlbladdr_list.next;
+	return smk_seq_start(s, pos, &smk_netlbladdr_list);
 }
 
 static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct list_head *list = v;
-
-	if (list_is_last(list, &smk_netlbladdr_list)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-
-	return list->next;
+	return smk_seq_next(s, v, pos, &smk_netlbladdr_list);
 }
 #define BEBITS	(sizeof(__be32) * 8)
 
@@ -828,16 +810,11 @@
 	return 0;
 }
 
-static void netlbladdr_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations netlbladdr_seq_ops = {
 	.start = netlbladdr_seq_start,
-	.stop  = netlbladdr_seq_stop,
 	.next  = netlbladdr_seq_next,
 	.show  = netlbladdr_seq_show,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -1405,23 +1382,14 @@
 {
 	struct task_smack *tsp = current_security();
 
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&tsp->smk_rules))
-		return NULL;
-	return tsp->smk_rules.next;
+	return smk_seq_start(s, pos, &tsp->smk_rules);
 }
 
 static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
 	struct task_smack *tsp = current_security();
-	struct list_head *list = v;
 
-	if (list_is_last(list, &tsp->smk_rules)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-	return list->next;
+	return smk_seq_next(s, v, pos, &tsp->smk_rules);
 }
 
 static int load_self_seq_show(struct seq_file *s, void *v)
@@ -1453,16 +1421,11 @@
 	return 0;
 }
 
-static void load_self_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations load_self_seq_ops = {
 	.start = load_self_seq_start,
 	.next  = load_self_seq_next,
 	.show  = load_self_seq_show,
-	.stop  = load_self_seq_stop,
+	.stop  = smk_seq_stop,
 };
 
 
diff --git a/sound/aoa/soundbus/i2sbus/pcm.c b/sound/aoa/soundbus/i2sbus/pcm.c
index be83899..19491ed 100644
--- a/sound/aoa/soundbus/i2sbus/pcm.c
+++ b/sound/aoa/soundbus/i2sbus/pcm.c
@@ -12,6 +12,7 @@
 #include <sound/core.h>
 #include <asm/macio.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include "../soundbus.h"
 #include "i2sbus.h"
 
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 8ad6535..d1aa421 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <sound/ac97_codec.h>
 #include <sound/pxa2xx-lib.h>
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
index 535704f..26422a3 100644
--- a/sound/arm/pxa2xx-pcm.c
+++ b/sound/arm/pxa2xx-pcm.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pxa2xx-lib.h>
 
diff --git a/sound/core/control.c b/sound/core/control.c
index 978fe1a..819a5c5 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -21,6 +21,7 @@
 
 #include <linux/threads.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/time.h>
@@ -1081,12 +1082,12 @@
 	char *names, *p;
 	size_t buf_len, name_len;
 	unsigned int i;
+	const uintptr_t user_ptrval = ue->info.value.enumerated.names_ptr;
 
 	if (ue->info.value.enumerated.names_length > 64 * 1024)
 		return -EINVAL;
 
-	names = memdup_user(
-		(const void __user *)ue->info.value.enumerated.names_ptr,
+	names = memdup_user((const void __user *)user_ptrval,
 		ue->info.value.enumerated.names_length);
 	if (IS_ERR(names))
 		return PTR_ERR(names);
diff --git a/sound/core/device.c b/sound/core/device.c
index 2d1ad4b0..f03cb54 100644
--- a/sound/core/device.c
+++ b/sound/core/device.c
@@ -21,6 +21,7 @@
 
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/export.h>
 #include <linux/errno.h>
 #include <sound/core.h>
 
diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index a70ee7f..75ea16f 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/minors.h>
@@ -272,7 +273,14 @@
 			if (get_user(device, (int __user *)arg))
 				return -EFAULT;
 			mutex_lock(&register_mutex);
-			device = device < 0 ? 0 : device + 1;
+
+			if (device < 0)
+				device = 0;
+			else if (device < SNDRV_MINOR_HWDEPS)
+				device++;
+			else
+				device = SNDRV_MINOR_HWDEPS;
+
 			while (device < SNDRV_MINOR_HWDEPS) {
 				if (snd_hwdep_search(card, device))
 					break;
diff --git a/sound/core/info.c b/sound/core/info.c
index 601f0eb..c1e611c 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/minors.h>
 #include <sound/info.h>
diff --git a/sound/core/info_oss.c b/sound/core/info_oss.c
index e4af138..cf42ab5 100644
--- a/sound/core/info_oss.c
+++ b/sound/core/info_oss.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/string.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/minors.h>
 #include <sound/info.h>
diff --git a/sound/core/init.c b/sound/core/init.c
index 2c041bb..3ac49b1 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -21,6 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/file.h>
 #include <linux/slab.h>
 #include <linux/time.h>
diff --git a/sound/core/isadma.c b/sound/core/isadma.c
index 950e19b..c0f1208 100644
--- a/sound/core/isadma.c
+++ b/sound/core/isadma.c
@@ -26,6 +26,7 @@
 
 #undef HAVE_REALLY_SLOW_DMA_CONTROLLER
 
+#include <linux/export.h>
 #include <sound/core.h>
 #include <asm/dma.h>
 
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 240a3e1..26edf63 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -21,6 +21,7 @@
 
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/jack.h>
 #include <sound/core.h>
 
diff --git a/sound/core/memory.c b/sound/core/memory.c
index 1161158..66a278d 100644
--- a/sound/core/memory.c
+++ b/sound/core/memory.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/export.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <sound/core.h>
diff --git a/sound/core/misc.c b/sound/core/misc.c
index eb9fe2e..465f0ce 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -20,6 +20,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
+#include <linux/moduleparam.h>
 #include <linux/time.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 1b5e0c4..18297f7 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/string.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/minors.h>
 #include <sound/control.h>
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 23c34a0..3cc4b86 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -30,7 +30,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/vmalloc.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/math64.h>
 #include <linux/string.h>
 #include <sound/core.h>
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index ee9abb2..8928ca87 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -21,6 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/time.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 95d1e78..3420bd3 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/math64.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index 150cb7e..9571313 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/info.h>
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index 88f02e3..9c9eff9 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -20,6 +20,7 @@
  */
   
 #include <linux/time.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #define SND_PCM_FORMAT_UNKNOWN (-1)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index d7d2179..25ed9fe 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/file.h>
 #include <linux/slab.h>
 #include <linux/time.h>
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index 849a0ed..ebf6e49 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -27,7 +27,7 @@
 #include <linux/time.h>
 #include <linux/wait.h>
 #include <linux/mutex.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <sound/rawmidi.h>
 #include <sound/info.h>
diff --git a/sound/core/seq/oss/seq_oss.c b/sound/core/seq/oss/seq_oss.c
index a1f1a2f..8d4d5e8 100644
--- a/sound/core/seq/oss/seq_oss.c
+++ b/sound/core/seq/oss/seq_oss.c
@@ -21,7 +21,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/minors.h>
diff --git a/sound/core/seq/oss/seq_oss_init.c b/sound/core/seq/oss/seq_oss_init.c
index 69cd7b3..e3cb46f 100644
--- a/sound/core/seq/oss/seq_oss_init.c
+++ b/sound/core/seq/oss/seq_oss_init.c
@@ -28,6 +28,7 @@
 #include "seq_oss_timer.h"
 #include "seq_oss_event.h"
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
 
diff --git a/sound/core/seq/oss/seq_oss_synth.c b/sound/core/seq/oss/seq_oss_synth.c
index ee44ab9..c5b773a 100644
--- a/sound/core/seq/oss/seq_oss_synth.c
+++ b/sound/core/seq/oss/seq_oss_synth.c
@@ -24,6 +24,7 @@
 #include "seq_oss_midi.h"
 #include "../seq_lock.h"
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 /*
diff --git a/sound/core/seq/seq.c b/sound/core/seq/seq.c
index 119fddb6..9d8379a 100644
--- a/sound/core/seq/seq.c
+++ b/sound/core/seq/seq.c
@@ -20,7 +20,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index f2436d3..4dc6bae 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <sound/core.h>
 #include <sound/minors.h>
diff --git a/sound/core/seq/seq_device.c b/sound/core/seq/seq_device.c
index 1f99767..5cf8d65 100644
--- a/sound/core/seq/seq_device.c
+++ b/sound/core/seq/seq_device.c
@@ -37,6 +37,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/seq_device.h>
diff --git a/sound/core/seq/seq_dummy.c b/sound/core/seq/seq_dummy.c
index 1d7d90c..b9b2235 100644
--- a/sound/core/seq/seq_dummy.c
+++ b/sound/core/seq/seq_dummy.c
@@ -20,7 +20,7 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "seq_clientmgr.h"
 #include <sound/initval.h>
diff --git a/sound/core/seq/seq_info.c b/sound/core/seq/seq_info.c
index 201f810..acf7769 100644
--- a/sound/core/seq/seq_info.c
+++ b/sound/core/seq/seq_info.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <sound/core.h>
 
 #include "seq_info.h"
diff --git a/sound/core/seq/seq_lock.c b/sound/core/seq/seq_lock.c
index 54f921e..2cfe50c 100644
--- a/sound/core/seq/seq_lock.c
+++ b/sound/core/seq/seq_lock.c
@@ -19,6 +19,7 @@
  *
  */
 
+#include <linux/export.h>
 #include <sound/core.h>
 #include "seq_lock.h"
 
diff --git a/sound/core/seq/seq_memory.c b/sound/core/seq/seq_memory.c
index 7f50c14..f478f77 100644
--- a/sound/core/seq/seq_memory.c
+++ b/sound/core/seq/seq_memory.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <sound/core.h>
diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index ebaf1b5..64069db 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -30,7 +30,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/rawmidi.h>
diff --git a/sound/core/seq/seq_midi_emul.c b/sound/core/seq/seq_midi_emul.c
index 07c6631..6f64471 100644
--- a/sound/core/seq/seq_midi_emul.c
+++ b/sound/core/seq/seq_midi_emul.c
@@ -32,6 +32,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/seq_kernel.h>
 #include <sound/seq_midi_emul.h>
diff --git a/sound/core/seq/seq_midi_event.c b/sound/core/seq/seq_midi_event.c
index b5d6ea4..37db7ba 100644
--- a/sound/core/seq/seq_midi_event.c
+++ b/sound/core/seq/seq_midi_event.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/seq_kernel.h>
 #include <sound/seq_midi_event.h>
diff --git a/sound/core/seq/seq_ports.c b/sound/core/seq/seq_ports.c
index e12bcd9..9516e5c 100644
--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -22,6 +22,7 @@
 
 #include <sound/core.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include "seq_system.h"
 #include "seq_ports.h"
 #include "seq_clientmgr.h"
diff --git a/sound/core/seq/seq_system.c b/sound/core/seq/seq_system.c
index c38b90c..8ce1d0b 100644
--- a/sound/core/seq/seq_system.c
+++ b/sound/core/seq/seq_system.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <sound/core.h>
 #include "seq_system.h"
diff --git a/sound/core/seq/seq_virmidi.c b/sound/core/seq/seq_virmidi.c
index 86e7739..4b50e60 100644
--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -37,6 +37,7 @@
 
 #include <linux/init.h>
 #include <linux/wait.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <sound/core.h>
 #include <sound/rawmidi.h>
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 1c7a3ef..828af35 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/minors.h>
 #include <sound/info.h>
diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c
index 0c164e5..c700920 100644
--- a/sound/core/sound_oss.c
+++ b/sound/core/sound_oss.c
@@ -26,6 +26,7 @@
 #endif
 
 #include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <sound/core.h>
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 67ebf1c..8e7561d 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -24,7 +24,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/mutex.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/timer.h>
diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c
index a39d3d8..130cfe6 100644
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/tlv.h>
@@ -51,6 +52,7 @@
 	struct link_ctl_info info;
 	int vals[2];		/* current values */
 	unsigned int flags;
+	struct snd_kcontrol *kctl; /* original kcontrol pointer */
 	struct snd_kcontrol slave; /* the copy of original control entry */
 };
 
@@ -251,6 +253,7 @@
 		       slave->count * sizeof(*slave->vd), GFP_KERNEL);
 	if (!srec)
 		return -ENOMEM;
+	srec->kctl = slave;
 	srec->slave = *slave;
 	memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd));
 	srec->master = master_link;
@@ -332,10 +335,18 @@
 static void master_free(struct snd_kcontrol *kcontrol)
 {
 	struct link_master *master = snd_kcontrol_chip(kcontrol);
-	struct link_slave *slave;
+	struct link_slave *slave, *n;
 
-	list_for_each_entry(slave, &master->slaves, list)
-		slave->master = NULL;
+	/* free all slave links and retore the original slave kctls */
+	list_for_each_entry_safe(slave, n, &master->slaves, list) {
+		struct snd_kcontrol *sctl = slave->kctl;
+		struct list_head olist = sctl->list;
+		memcpy(sctl, &slave->slave, sizeof(*sctl));
+		memcpy(sctl->vd, slave->slave.vd,
+		       sctl->count * sizeof(*sctl->vd));
+		sctl->list = olist; /* keep the current linked-list */
+		kfree(slave);
+	}
 	kfree(master);
 }
 
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
index 4067f15..d83bafc 100644
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -34,7 +34,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index 7f41990..97f1f93 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -27,7 +27,7 @@
 #include <linux/wait.h>
 #include <linux/hrtimer.h>
 #include <linux/math64.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/tlv.h>
diff --git a/sound/drivers/ml403-ac97cr.c b/sound/drivers/ml403-ac97cr.c
index 2c7a763..2ee82c5 100644
--- a/sound/drivers/ml403-ac97cr.c
+++ b/sound/drivers/ml403-ac97cr.c
@@ -34,7 +34,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 
 #include <linux/platform_device.h>
 
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 1c02852..2575690 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -24,7 +24,7 @@
 #include <linux/pnp.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/mpu401.h>
 #include <sound/initval.h>
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index e91698a..1cff331 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -33,6 +33,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
 #include <sound/core.h>
diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c
index 1eef4cc..7693079 100644
--- a/sound/drivers/mtpav.c
+++ b/sound/drivers/mtpav.c
@@ -52,6 +52,7 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c
index 8539ab0..f24bf9a 100644
--- a/sound/drivers/mts64.c
+++ b/sound/drivers/mts64.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/parport.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/drivers/opl3/opl3_lib.c b/sound/drivers/opl3/opl3_lib.c
index 6e31e46..33d9a85 100644
--- a/sound/drivers/opl3/opl3_lib.c
+++ b/sound/drivers/opl3/opl3_lib.c
@@ -26,6 +26,7 @@
 #include <sound/opl3.h>
 #include <asm/io.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
diff --git a/sound/drivers/opl3/opl3_oss.c b/sound/drivers/opl3/opl3_oss.c
index ade3ca5..c1cb249 100644
--- a/sound/drivers/opl3/opl3_oss.c
+++ b/sound/drivers/opl3/opl3_oss.c
@@ -18,6 +18,7 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/export.h>
 #include "opl3_voice.h"
 
 static int snd_opl3_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure);
diff --git a/sound/drivers/opl3/opl3_seq.c b/sound/drivers/opl3/opl3_seq.c
index 2d33f53..723562e 100644
--- a/sound/drivers/opl3/opl3_seq.c
+++ b/sound/drivers/opl3/opl3_seq.c
@@ -25,6 +25,7 @@
 #include "opl3_voice.h"
 #include <linux/init.h>
 #include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/initval.h>
 
 MODULE_AUTHOR("Uros Bizjak <uros@kss-loka.si>");
diff --git a/sound/drivers/opl3/opl3_synth.c b/sound/drivers/opl3/opl3_synth.c
index 301acb6..742a4b6 100644
--- a/sound/drivers/opl3/opl3_synth.c
+++ b/sound/drivers/opl3/opl3_synth.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <sound/opl3.h>
 #include <sound/asound_fm.h>
 
diff --git a/sound/drivers/opl4/opl4_lib.c b/sound/drivers/opl4/opl4_lib.c
index f07e38d..b953fb4 100644
--- a/sound/drivers/opl4/opl4_lib.c
+++ b/sound/drivers/opl4/opl4_lib.c
@@ -22,6 +22,7 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <asm/io.h>
 
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
diff --git a/sound/drivers/opl4/opl4_proc.c b/sound/drivers/opl4/opl4_proc.c
index df850b8..9b824bf 100644
--- a/sound/drivers/opl4/opl4_proc.c
+++ b/sound/drivers/opl4/opl4_proc.c
@@ -19,6 +19,7 @@
 
 #include "opl4_local.h"
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <sound/info.h>
 
 #ifdef CONFIG_PROC_FS
diff --git a/sound/drivers/opl4/opl4_seq.c b/sound/drivers/opl4/opl4_seq.c
index 43d8a2b..9919769 100644
--- a/sound/drivers/opl4/opl4_seq.c
+++ b/sound/drivers/opl4/opl4_seq.c
@@ -34,6 +34,7 @@
 #include "opl4_local.h"
 #include <linux/init.h>
 #include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/initval.h>
 
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index f165c77..946a0cb 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/initval.h>
diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c
index f2b0ba2..f664823 100644
--- a/sound/drivers/portman2x4.c
+++ b/sound/drivers/portman2x4.c
@@ -43,6 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/rawmidi.h>
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index fc1d822..85aad43 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -36,7 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/rawmidi.h>
 #include <sound/initval.h>
diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c
index f4cd493..d79d6ed 100644
--- a/sound/drivers/virmidi.c
+++ b/sound/drivers/virmidi.c
@@ -45,7 +45,7 @@
 #include <linux/wait.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/seq_kernel.h>
 #include <sound/seq_virmidi.h>
diff --git a/sound/drivers/vx/vx_core.c b/sound/drivers/vx/vx_core.c
index 19c6e37..b8e5159 100644
--- a/sound/drivers/vx/vx_core.c
+++ b/sound/drivers/vx/vx_core.c
@@ -26,6 +26,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/asoundef.h>
diff --git a/sound/drivers/vx/vx_hwdep.c b/sound/drivers/vx/vx_hwdep.c
index f7a6fbd..4a1fae9 100644
--- a/sound/drivers/vx/vx_hwdep.c
+++ b/sound/drivers/vx/vx_hwdep.c
@@ -24,6 +24,7 @@
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/hwdep.h>
 #include <sound/vx_core.h>
diff --git a/sound/firewire/iso-resources.c b/sound/firewire/iso-resources.c
index ffe20b8..5f17b77 100644
--- a/sound/firewire/iso-resources.c
+++ b/sound/firewire/iso-resources.c
@@ -8,6 +8,7 @@
 #include <linux/device.h>
 #include <linux/firewire.h>
 #include <linux/firewire-constants.h>
+#include <linux/export.h>
 #include <linux/jiffies.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
diff --git a/sound/firewire/packets-buffer.c b/sound/firewire/packets-buffer.c
index 3c61ca2..ea15066 100644
--- a/sound/firewire/packets-buffer.c
+++ b/sound/firewire/packets-buffer.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/firewire.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include "packets-buffer.h"
 
diff --git a/sound/i2c/cs8427.c b/sound/i2c/cs8427.c
index 04ae870..6c2dc38 100644
--- a/sound/i2c/cs8427.c
+++ b/sound/i2c/cs8427.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/bitrev.h>
+#include <linux/module.h>
 #include <asm/unaligned.h>
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/i2c/i2c.c b/sound/i2c/i2c.c
index eb7c7d0..4677037 100644
--- a/sound/i2c/i2c.c
+++ b/sound/i2c/i2c.c
@@ -22,6 +22,7 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <sound/core.h>
diff --git a/sound/i2c/other/ak4113.c b/sound/i2c/other/ak4113.c
index c424d32..dde5c9c 100644
--- a/sound/i2c/other/ak4113.c
+++ b/sound/i2c/other/ak4113.c
@@ -23,6 +23,7 @@
 
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
diff --git a/sound/i2c/other/ak4114.c b/sound/i2c/other/ak4114.c
index d9fb537..fdf3c1b 100644
--- a/sound/i2c/other/ak4114.c
+++ b/sound/i2c/other/ak4114.c
@@ -22,6 +22,7 @@
 
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
diff --git a/sound/i2c/other/ak4117.c b/sound/i2c/other/ak4117.c
index 2cad2d6..b4b2a51 100644
--- a/sound/i2c/other/ak4117.c
+++ b/sound/i2c/other/ak4117.c
@@ -22,6 +22,7 @@
 
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
diff --git a/sound/i2c/other/ak4xxx-adda.c b/sound/i2c/other/ak4xxx-adda.c
index 57ccba8..cef813d 100644
--- a/sound/i2c/other/ak4xxx-adda.c
+++ b/sound/i2c/other/ak4xxx-adda.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/tlv.h>
diff --git a/sound/i2c/other/pt2258.c b/sound/i2c/other/pt2258.c
index 797d3a6..9fa390b 100644
--- a/sound/i2c/other/pt2258.c
+++ b/sound/i2c/other/pt2258.c
@@ -24,6 +24,7 @@
 #include <sound/tlv.h>
 #include <sound/i2c.h>
 #include <sound/pt2258.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Jochen Voss <voss@seehuhn.de>");
 MODULE_DESCRIPTION("PT2258 volume controller (Princeton Technology Corp.)");
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 484a35b..6b68c82 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -22,6 +22,7 @@
 
 #include <asm/io.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/version.h>
diff --git a/sound/i2c/tea6330t.c b/sound/i2c/tea6330t.c
index 0e3a9f2..2d22310 100644
--- a/sound/i2c/tea6330t.c
+++ b/sound/i2c/tea6330t.c
@@ -22,6 +22,7 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/tea6330t.h>
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index a87a2b5..cd44c74 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -22,7 +22,7 @@
 #include <linux/time.h>
 #include <linux/wait.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/ad1816a.h>
diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c
index 4beeb6f..34ab69b 100644
--- a/sound/isa/ad1848/ad1848.c
+++ b/sound/isa/ad1848/ad1848.c
@@ -26,7 +26,7 @@
 #include <linux/isa.h>
 #include <linux/time.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/initval.h>
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index 706effd..fc5b38f 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -28,7 +28,7 @@
 #include <linux/wait.h>
 #include <linux/time.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/mpu401.h>
diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c
index b7bdbf3..e55f3eb 100644
--- a/sound/isa/azt2320.c
+++ b/sound/isa/azt2320.c
@@ -35,7 +35,7 @@
 #include <linux/time.h>
 #include <linux/wait.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/wss.h>
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index dca69f8..c94578d 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -47,7 +47,7 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/opl3.h>
diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c
index 409fa0a..6d81fa7 100644
--- a/sound/isa/cs423x/cs4231.c
+++ b/sound/isa/cs423x/cs4231.c
@@ -25,7 +25,7 @@
 #include <linux/isa.h>
 #include <linux/time.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/mpu401.h>
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 0dbde46..f5a94b6 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/mpu401.h>
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 5493e9e..9a1a6f2 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -25,7 +25,7 @@
 #include <linux/isapnp.h>
 #include <linux/time.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/es1688.h>
diff --git a/sound/isa/es1688/es1688_lib.c b/sound/isa/es1688/es1688_lib.c
index d3eab6f..1d47be8 100644
--- a/sound/isa/es1688/es1688_lib.c
+++ b/sound/isa/es1688/es1688_lib.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/es1688.h>
 #include <sound/initval.h>
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index bf6ad0b..98e3ac1 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -82,7 +82,7 @@
 #include <linux/isa.h>
 #include <linux/pnp.h>
 #include <linux/isapnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 
 #include <asm/io.h>
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index 3167e5a..4490ee4 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/gus.h>
 #include <sound/control.h>
diff --git a/sound/isa/gus/gus_volume.c b/sound/isa/gus/gus_volume.c
index c3c028a..3dd841a 100644
--- a/sound/isa/gus/gus_volume.c
+++ b/sound/isa/gus/gus_volume.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/time.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/gus.h>
 #define __GUS_TABLES_ALLOC__
diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c
index 086b8f0..d729650 100644
--- a/sound/isa/gus/gusclassic.c
+++ b/sound/isa/gus/gusclassic.c
@@ -24,7 +24,7 @@
 #include <linux/isa.h>
 #include <linux/delay.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/gus.h>
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index c4733c0..597accd 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -24,7 +24,7 @@
 #include <linux/isa.h>
 #include <linux/delay.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/gus.h>
diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c
index c43faa0..933cb0f 100644
--- a/sound/isa/gus/gusmax.c
+++ b/sound/isa/gus/gusmax.c
@@ -24,7 +24,7 @@
 #include <linux/isa.h>
 #include <linux/delay.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/gus.h>
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index 5f869a3..8e7e194 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -27,7 +27,7 @@
 #include <linux/isa.h>
 #include <linux/delay.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/gus.h>
diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c
index 3a1526a..1cee18f 100644
--- a/sound/isa/msnd/msnd.c
+++ b/sound/isa/msnd/msnd.c
@@ -41,6 +41,7 @@
 #include <linux/io.h>
 #include <linux/fs.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
diff --git a/sound/isa/msnd/msnd_midi.c b/sound/isa/msnd/msnd_midi.c
index 7874956..ffc67fd 100644
--- a/sound/isa/msnd/msnd_midi.c
+++ b/sound/isa/msnd/msnd_midi.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/rawmidi.h>
 
diff --git a/sound/isa/msnd/msnd_pinnacle_mixer.c b/sound/isa/msnd/msnd_pinnacle_mixer.c
index 494058a..1de59d4 100644
--- a/sound/isa/msnd/msnd_pinnacle_mixer.c
+++ b/sound/isa/msnd/msnd_pinnacle_mixer.c
@@ -16,6 +16,7 @@
  ***************************************************************************/
 
 #include <linux/io.h>
+#include <linux/export.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index bbafb0b..64a9a21 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/pm.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/mpu401.h>
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index d94d0f3..3785b7a 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -28,7 +28,7 @@
 #include <linux/pnp.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <sound/core.h>
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 6dbbfa7..97871be 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -28,7 +28,7 @@
 #include <linux/isa.h>
 #include <linux/delay.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <sound/core.h>
diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c
index 5d61f5a..7188787 100644
--- a/sound/isa/sb/emu8000.c
+++ b/sound/isa/sb/emu8000.c
@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <sound/core.h>
 #include <sound/emu8000.h>
diff --git a/sound/isa/sb/emu8000_callback.c b/sound/isa/sb/emu8000_callback.c
index 9a3c71cc..344b435 100644
--- a/sound/isa/sb/emu8000_callback.c
+++ b/sound/isa/sb/emu8000_callback.c
@@ -20,6 +20,7 @@
  */
 
 #include "emu8000_local.h"
+#include <linux/export.h>
 #include <sound/asoundef.h>
 
 /*
diff --git a/sound/isa/sb/emu8000_patch.c b/sound/isa/sb/emu8000_patch.c
index c99c607..e09f144 100644
--- a/sound/isa/sb/emu8000_patch.c
+++ b/sound/isa/sb/emu8000_patch.c
@@ -22,6 +22,7 @@
 #include "emu8000_local.h"
 #include <asm/uaccess.h>
 #include <linux/moduleparam.h>
+#include <linux/moduleparam.h>
 
 static int emu8000_reset_addr;
 module_param(emu8000_reset_addr, int, 0444);
diff --git a/sound/isa/sb/emu8000_synth.c b/sound/isa/sb/emu8000_synth.c
index 0c7905c..4e3fcfb 100644
--- a/sound/isa/sb/emu8000_synth.c
+++ b/sound/isa/sb/emu8000_synth.c
@@ -22,6 +22,7 @@
 
 #include "emu8000_local.h"
 #include <linux/init.h>
+#include <linux/module.h>
 #include <sound/initval.h>
 
 MODULE_AUTHOR("Takashi Iwai, Steve Ratcliffe");
diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index 237f8bd..115c774 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -24,7 +24,7 @@
 #include <linux/pnp.h>
 #include <linux/err.h>
 #include <linux/isa.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/sb.h>
 #include <sound/sb16_csp.h>
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index bdc8dde..c1aa21e 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c
index 2a6cc1c..0bbcd47 100644
--- a/sound/isa/sb/sb16_main.c
+++ b/sound/isa/sb/sb16_main.c
@@ -37,6 +37,7 @@
 #include <asm/dma.h>
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/sb.h>
 #include <sound/sb16_csp.h>
diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c
index 2259e3f..453ef28 100644
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/ioport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/sb.h>
 #include <sound/opl3.h>
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 7d84c9f..24d4121 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -34,6 +34,7 @@
 #include <asm/dma.h>
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/sb.h>
 
diff --git a/sound/isa/sb/sb_common.c b/sound/isa/sb/sb_common.c
index d2e1921..3ef9906 100644
--- a/sound/isa/sb/sb_common.c
+++ b/sound/isa/sb/sb_common.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/sb.h>
 #include <sound/initval.h>
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index f2379e1..b4a6aa9 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -28,7 +28,7 @@
 #include <linux/firmware.h>
 #include <linux/pnp.h>
 #include <linux/spinlock.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/dma.h>
 #include <sound/core.h>
 #include <sound/wss.h>
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index 8714297..150b96b 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -24,7 +24,7 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/pnp.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/opl3.h>
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index 657e2d6..e51e090 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -21,6 +21,7 @@
 #include <linux/time.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <sound/core.h>
 #include <sound/snd_wavefront.h>
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index 4fb7b19..405f8b6 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -29,6 +29,7 @@
 #include <linux/firmware.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/snd_wavefront.h>
 #include <sound/initval.h>
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 7277c5b..49c8a0c 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/pcm_params.h>
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 77dd0a1..d2f615a 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -24,7 +24,7 @@
 
 config SND_AU1X00
 	tristate "Au1x00 AC97 Port Driver (DEPRECATED)"
-	depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
+	depends on MIPS_ALCHEMY
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index 7567ebd..3f3ec0b 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -38,6 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
index 453d343..2e6c858 100644
--- a/sound/mips/hal2.c
+++ b/sound/mips/hal2.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/sgi/hpc3.h>
 #include <asm/sgi/ip22.h>
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index 717604c..69425d4 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/ip32/ip32_ints.h>
 #include <asm/ip32/mace.h>
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 7f4d619..fac51ee 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/ac97/ac97_pcm.c b/sound/pci/ac97/ac97_pcm.c
index 48cbda9..f1488fc 100644
--- a/sound/pci/ac97/ac97_pcm.c
+++ b/sound/pci/ac97/ac97_pcm.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index 2015036..6e31118 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -39,6 +39,7 @@
 #include <linux/interrupt.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/ak4531_codec.c b/sound/pci/ak4531_codec.c
index fd135e3..cadf7b9 100644
--- a/sound/pci/ak4531_codec.c
+++ b/sound/pci/ak4531_codec.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/ak4531_codec.h>
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index b444b74..ef85ac5 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 736c8e9..8dc77a0 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -32,7 +32,7 @@
 
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 0462869..28ef40e 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -69,7 +69,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index eae62eb..f4b9e2b 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/wait.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index a32502e..f6b9517 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -33,6 +33,7 @@
 #include <asm/uaccess.h>
 #include <linux/pci.h>
 #include <linux/stringify.h>
+#include <linux/module.h>
 
 #ifdef MODULE_FIRMWARE
 MODULE_FIRMWARE("asihpi/dsp5000.bin");
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 537e0a2..15e4e5e 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -25,7 +25,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 45df275..57bf8f4 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -25,7 +25,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index a384699..dc326be 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -19,7 +19,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <sound/initval.h>
 
diff --git a/sound/pci/au88x0/au88x0_game.c b/sound/pci/au88x0/au88x0_game.c
index e291aa5..c07c792 100644
--- a/sound/pci/au88x0/au88x0_game.c
+++ b/sound/pci/au88x0/au88x0_game.c
@@ -34,6 +34,7 @@
 #include <sound/core.h>
 #include "au88x0.h"
 #include <linux/gameport.h>
+#include <linux/export.h>
 
 #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
 
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index f8569b1..7a58115 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index d24fe42..bc1e683 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -186,7 +186,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 3918033..c1c2d0c 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/bitops.h>
 #include <asm/io.h>
 #include <sound/core.h>
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 061b7e6..fe99fde 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -140,7 +140,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/initval.h>
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index da9c732..954c993 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -27,7 +27,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index 07f04e3..a6c6c5c 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -26,7 +26,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index 1af9555..a4ecb40 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -28,7 +28,7 @@
 #include <linux/pci.h>
 #include <linux/time.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/cs46xx.h>
 #include <sound/initval.h>
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 9546bf0..4fa5316 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -53,6 +53,7 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 
 
 #include <sound/core.h>
diff --git a/sound/pci/cs5530.c b/sound/pci/cs5530.c
index a466934..958f494 100644
--- a/sound/pci/cs5530.c
+++ b/sound/pci/cs5530.c
@@ -37,7 +37,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 10d22ed..b8959d2 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
index e083122..dbf94b1 100644
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -148,7 +148,7 @@
 		struct cs5535audio_dma_desc *desc =
 			&((struct cs5535audio_dma_desc *) dma->desc_buf.area)[i];
 		desc->addr = cpu_to_le32(addr);
-		desc->size = cpu_to_le32(period_bytes);
+		desc->size = cpu_to_le16(period_bytes);
 		desc->ctlreserved = cpu_to_le16(PRD_EOP);
 		desc_addr += sizeof(struct cs5535audio_dma_desc);
 		addr += period_bytes;
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
index b259aa0..33931ef 100644
--- a/sound/pci/ctxfi/xfi.c
+++ b/sound/pci/ctxfi/xfi.c
@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 #include <linux/moduleparam.h>
 #include <linux/pci_ids.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include "ctatc.h"
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
index 43c7e12..d47e72a 100644
--- a/sound/pci/echoaudio/darla20.c
+++ b/sound/pci/echoaudio/darla20.c
@@ -40,7 +40,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
index 95b0330..413acf7 100644
--- a/sound/pci/echoaudio/darla24.c
+++ b/sound/pci/echoaudio/darla24.c
@@ -44,7 +44,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
index 8723c40..1ec4edc 100644
--- a/sound/pci/echoaudio/echo3g.c
+++ b/sound/pci/echoaudio/echo3g.c
@@ -51,7 +51,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index d730698..9fd694c 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -16,6 +16,8 @@
  *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/module.h>
+
 MODULE_AUTHOR("Giuliano Pochini <pochini@shiny.it>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Echoaudio " ECHOCARD_NAME " soundcards driver");
diff --git a/sound/pci/echoaudio/gina20.c b/sound/pci/echoaudio/gina20.c
index 0058c67..039125b 100644
--- a/sound/pci/echoaudio/gina20.c
+++ b/sound/pci/echoaudio/gina20.c
@@ -44,7 +44,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/gina24.c b/sound/pci/echoaudio/gina24.c
index 14e4925..5e966f6 100644
--- a/sound/pci/echoaudio/gina24.c
+++ b/sound/pci/echoaudio/gina24.c
@@ -50,7 +50,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/indigo.c b/sound/pci/echoaudio/indigo.c
index f416b15..c166b7e 100644
--- a/sound/pci/echoaudio/indigo.c
+++ b/sound/pci/echoaudio/indigo.c
@@ -42,7 +42,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/indigodj.c b/sound/pci/echoaudio/indigodj.c
index e594a3b..a3ef3b9 100644
--- a/sound/pci/echoaudio/indigodj.c
+++ b/sound/pci/echoaudio/indigodj.c
@@ -42,7 +42,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c
index f0d00bf..f516444 100644
--- a/sound/pci/echoaudio/indigodjx.c
+++ b/sound/pci/echoaudio/indigodjx.c
@@ -42,7 +42,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/io.h>
 #include <linux/slab.h>
diff --git a/sound/pci/echoaudio/indigoio.c b/sound/pci/echoaudio/indigoio.c
index 1af0037..c22c82f 100644
--- a/sound/pci/echoaudio/indigoio.c
+++ b/sound/pci/echoaudio/indigoio.c
@@ -43,7 +43,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c
index 0b51163..86cf2d0 100644
--- a/sound/pci/echoaudio/indigoiox.c
+++ b/sound/pci/echoaudio/indigoiox.c
@@ -43,7 +43,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/io.h>
 #include <linux/slab.h>
diff --git a/sound/pci/echoaudio/layla20.c b/sound/pci/echoaudio/layla20.c
index 3f63ab8..6a027f3 100644
--- a/sound/pci/echoaudio/layla20.c
+++ b/sound/pci/echoaudio/layla20.c
@@ -49,7 +49,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/layla24.c b/sound/pci/echoaudio/layla24.c
index 2831372..96a5991 100644
--- a/sound/pci/echoaudio/layla24.c
+++ b/sound/pci/echoaudio/layla24.c
@@ -51,7 +51,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
index eddaeb4..b8ce27e 100644
--- a/sound/pci/echoaudio/mia.c
+++ b/sound/pci/echoaudio/mia.c
@@ -50,7 +50,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/echoaudio/mona.c b/sound/pci/echoaudio/mona.c
index 0364011..1283bfb 100644
--- a/sound/pci/echoaudio/mona.c
+++ b/sound/pci/echoaudio/mona.c
@@ -48,7 +48,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <sound/core.h>
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index a9c45d2..eaa198e 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/emu10k1.h>
 #include <sound/initval.h>
diff --git a/sound/pci/emu10k1/emu10k1_callback.c b/sound/pci/emu10k1/emu10k1_callback.c
index 7ef949d9..a0afa50 100644
--- a/sound/pci/emu10k1/emu10k1_callback.c
+++ b/sound/pci/emu10k1/emu10k1_callback.c
@@ -18,6 +18,7 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/export.h>
 #include "emu10k1_synth_local.h"
 #include <sound/asoundef.h>
 
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index fcd4935..6a3e567 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -35,6 +35,7 @@
 #include <linux/kthread.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
diff --git a/sound/pci/emu10k1/emu10k1_synth.c b/sound/pci/emu10k1/emu10k1_synth.c
index ad7b714..4c41c90 100644
--- a/sound/pci/emu10k1/emu10k1_synth.c
+++ b/sound/pci/emu10k1/emu10k1_synth.c
@@ -20,6 +20,7 @@
 
 #include "emu10k1_synth_local.h"
 #include <linux/init.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Takashi Iwai");
 MODULE_DESCRIPTION("Routines for control of EMU10K1 WaveTable synth");
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index d4fde1b..2228be9 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -34,7 +34,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index 5ef7080..e4fba49 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -29,6 +29,7 @@
 #include <sound/core.h>
 #include <sound/emu10k1.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include "p17v.h"
 
 unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn)
diff --git a/sound/pci/emu10k1/memory.c b/sound/pci/emu10k1/memory.c
index c250614..4f502a2 100644
--- a/sound/pci/emu10k1/memory.c
+++ b/sound/pci/emu10k1/memory.c
@@ -25,6 +25,7 @@
 #include <linux/gfp.h>
 #include <linux/time.h>
 #include <linux/mutex.h>
+#include <linux/export.h>
 
 #include <sound/core.h>
 #include <sound/emu10k1.h>
diff --git a/sound/pci/emu10k1/voice.c b/sound/pci/emu10k1/voice.c
index 20b8da2..101e7cb 100644
--- a/sound/pci/emu10k1/voice.c
+++ b/sound/pci/emu10k1/voice.c
@@ -29,6 +29,7 @@
  */
 
 #include <linux/time.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/emu10k1.h>
 
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index f02e2f8..d085ad0 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -33,7 +33,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 718a264..04cc21f 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -52,7 +52,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <sound/core.h>
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 407e4ab..297a151 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -102,7 +102,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/input.h>
 
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 136f723..ec05ef5 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/tlv.h>
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 29714c8..60738e5 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include "hda_beep.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 1715e8b..4562e9d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include <sound/asoundef.h>
@@ -2330,6 +2331,39 @@
 	return 0;
 }
 
+typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
+
+/* apply the function to all matching slave ctls in the mixer list */
+static int map_slaves(struct hda_codec *codec, const char * const *slaves,
+		      map_slave_func_t func, void *data) 
+{
+	struct hda_nid_item *items;
+	const char * const *s;
+	int i, err;
+
+	items = codec->mixers.list;
+	for (i = 0; i < codec->mixers.used; i++) {
+		struct snd_kcontrol *sctl = items[i].kctl;
+		if (!sctl || !sctl->id.name ||
+		    sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
+			continue;
+		for (s = slaves; *s; s++) {
+			if (!strcmp(sctl->id.name, *s)) {
+				err = func(data, sctl);
+				if (err)
+					return err;
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int check_slave_present(void *data, struct snd_kcontrol *sctl)
+{
+	return 1;
+}
+
 /**
  * snd_hda_add_vmaster - create a virtual master control and add slaves
  * @codec: HD-audio codec
@@ -2350,12 +2384,10 @@
 			unsigned int *tlv, const char * const *slaves)
 {
 	struct snd_kcontrol *kctl;
-	const char * const *s;
 	int err;
 
-	for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++)
-		;
-	if (!*s) {
+	err = map_slaves(codec, slaves, check_slave_present, NULL);
+	if (err != 1) {
 		snd_printdd("No slave found for %s\n", name);
 		return 0;
 	}
@@ -2366,23 +2398,10 @@
 	if (err < 0)
 		return err;
 
-	for (s = slaves; *s; s++) {
-		struct snd_kcontrol *sctl;
-		int i = 0;
-		for (;;) {
-			sctl = _snd_hda_find_mixer_ctl(codec, *s, i);
-			if (!sctl) {
-				if (!i)
-					snd_printdd("Cannot find slave %s, "
-						    "skipped\n", *s);
-				break;
-			}
-			err = snd_ctl_add_slave(kctl, sctl);
-			if (err < 0)
-				return err;
-			i++;
-		}
-	}
+	err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
+			 kctl);
+	if (err < 0)
+		return err;
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
@@ -4027,9 +4046,9 @@
 
 	/* Search for codec ID */
 	for (q = tbl; q->subvendor; q++) {
-		unsigned long vendorid = (q->subdevice) | (q->subvendor << 16);
-
-		if (vendorid == codec->subsystem_id)
+		unsigned int mask = 0xffff0000 | q->subdevice_mask;
+		unsigned int id = (q->subdevice | (q->subvendor << 16)) & mask;
+		if ((codec->subsystem_id & mask) == id)
 			break;
 	}
 
@@ -4751,6 +4770,7 @@
 	memset(sequences_hp, 0, sizeof(sequences_hp));
 	assoc_line_out = 0;
 
+	codec->ignore_misc_bit = true;
 	end_nid = codec->start_nid + codec->num_nodes;
 	for (nid = codec->start_nid; nid < end_nid; nid++) {
 		unsigned int wid_caps = get_wcaps(codec, nid);
@@ -4766,6 +4786,9 @@
 			continue;
 
 		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+		      AC_DEFCFG_MISC_NO_PRESENCE))
+			codec->ignore_misc_bit = false;
 		conn = get_defcfg_connect(def_conf);
 		if (conn == AC_JACK_PORT_NONE)
 			continue;
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 755f2b0..5644711 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -854,6 +854,7 @@
 	unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
 	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
+	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int power_transition :1; /* power-state in transition */
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 1c8ddf5..c1da422 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -297,10 +297,18 @@
 					buf + ELD_FIXED_BYTES + mnl + 3 * i);
 	}
 
+	/*
+	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+	 * in console or for audio devices. Assume the highest speakers
+	 * configuration, to _not_ prohibit multi-channel audio playback.
+	 */
+	if (!e->spk_alloc)
+		e->spk_alloc = 0xffff;
+
+	e->eld_valid = true;
 	return 0;
 
 out_fail:
-	e->eld_ver = 0;
 	return -EINVAL;
 }
 
@@ -323,9 +331,6 @@
 	 * ELD is valid, actual eld_size is assigned in hdmi_update_eld()
 	 */
 
-	if (!eld->eld_valid)
-		return -ENOENT;
-
 	size = snd_hdmi_get_eld_size(codec, nid);
 	if (size == 0) {
 		/* wfg: workaround for ASUS P5E-VM HDMI board */
@@ -342,18 +347,28 @@
 
 	for (i = 0; i < size; i++) {
 		unsigned int val = hdmi_get_eld_data(codec, nid, i);
+		/*
+		 * Graphics driver might be writing to ELD buffer right now.
+		 * Just abort. The caller will repoll after a while.
+		 */
 		if (!(val & AC_ELDD_ELD_VALID)) {
-			if (!i) {
-				snd_printd(KERN_INFO
-					   "HDMI: invalid ELD data\n");
-				ret = -EINVAL;
-				goto error;
-			}
 			snd_printd(KERN_INFO
 				  "HDMI: invalid ELD data byte %d\n", i);
-			val = 0;
-		} else
-			val &= AC_ELDD_ELD_DATA;
+			ret = -EINVAL;
+			goto error;
+		}
+		val &= AC_ELDD_ELD_DATA;
+		/*
+		 * The first byte cannot be zero. This can happen on some DVI
+		 * connections. Some Intel chips may also need some 250ms delay
+		 * to return non-zero ELD data, even when the graphics driver
+		 * correctly writes ELD content before setting ELD_valid bit.
+		 */
+		if (!val && !i) {
+			snd_printdd(KERN_INFO "HDMI: 0 ELD data\n");
+			ret = -EINVAL;
+			goto error;
+		}
 		buf[i] = val;
 	}
 
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index a63c54d..431bf86 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -22,6 +22,7 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 72e5885..6b2efb8 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -26,6 +26,7 @@
 #include <linux/ctype.h>
 #include <linux/string.h>
 #include <linux/firmware.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
@@ -756,8 +757,6 @@
 	}
 	if (!fw->size)
 		return 0;
-	if (size < fw->size)
-		size = fw->size;
 
 	for (len = 0; len < fw->size; len++) {
 		if (!*p)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index bd7fc99..7d98240 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2508,7 +2508,6 @@
 	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
-	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
@@ -3063,12 +3062,12 @@
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
 	  .class_mask = 0xffffff,
 	  .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
-	  AZX_DCAPS_RIRB_PRE_DELAY },
+	  AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
 #else
 	/* this entry seems still valid -- i.e. without emu20kx chip */
 	{ PCI_DEVICE(0x1102, 0x0009),
 	  .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
-	  AZX_DCAPS_RIRB_PRE_DELAY },
+	  AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
 #endif
 	/* Vortex86MX */
 	{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 81e12c0..618ddad 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -442,6 +442,8 @@
 	(cfg & AC_DEFCFG_SEQUENCE)
 #define get_defcfg_device(cfg) \
 	((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
+#define get_defcfg_misc(cfg) \
+	((cfg & AC_DEFCFG_MISC) >> AC_DEFCFG_MISC_SHIFT)
 
 /* bit-flags for snd_hda_parse_pin_def_config() behavior */
 #define HDA_PINCFG_NO_HP_FIXUP	(1 << 0) /* no HP-split */
@@ -508,8 +510,15 @@
 
 static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
 {
-	return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
-		(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
+	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+		return false;
+	if (!codec->ignore_misc_bit &&
+	    (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+	     AC_DEFCFG_MISC_NO_PRESENCE))
+		return false;
+	if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+		return false;
+	return true;
 }
 
 /* flags for hda_nid_item */
@@ -644,6 +653,9 @@
 	int	spk_alloc;
 	int	sad_count;
 	struct cea_sad sad[ELD_MAX_SAD];
+	/*
+	 * all fields above eld_buffer will be cleared before updating ELD
+	 */
 	char    eld_buffer[ELD_MAX_SIZE];
 #ifdef CONFIG_PROC_FS
 	struct snd_info_entry *proc_entry;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index d8aac58..bcb3310 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include "hda_codec.h"
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 6b40684..993757b 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index d9a2254..35abe3c 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index c45f3e6..70a7abd 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
@@ -57,6 +58,8 @@
 	unsigned int gpio_mask;
 	unsigned int gpio_dir;
 	unsigned int gpio_data;
+	unsigned int gpio_eapd_hp; /* EAPD GPIO bit for headphones */
+	unsigned int gpio_eapd_speaker; /* EAPD GPIO bit for speakers */
 
 	struct hda_pcm pcm_rec[2];	/* PCM information */
 
@@ -75,6 +78,7 @@
 	CS420X_MBP53,
 	CS420X_MBP55,
 	CS420X_IMAC27,
+	CS420X_APPLE,
 	CS420X_AUTO,
 	CS420X_MODELS
 };
@@ -236,6 +240,15 @@
 	return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
 }
 
+static void cs_update_input_select(struct hda_codec *codec)
+{
+	struct cs_spec *spec = codec->spec;
+	if (spec->cur_adc)
+		snd_hda_codec_write(codec, spec->cur_adc, 0,
+				    AC_VERB_SET_CONNECT_SEL,
+				    spec->adc_idx[spec->cur_input]);
+}
+
 /*
  * Analog capture
  */
@@ -249,6 +262,7 @@
 	spec->cur_adc = spec->adc_nid[spec->cur_input];
 	spec->cur_adc_stream_tag = stream_tag;
 	spec->cur_adc_format = format;
+	cs_update_input_select(codec);
 	snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
 	return 0;
 }
@@ -688,10 +702,8 @@
 					   spec->cur_adc_stream_tag, 0,
 					   spec->cur_adc_format);
 	}
-	snd_hda_codec_write(codec, spec->cur_adc, 0,
-			    AC_VERB_SET_CONNECT_SEL,
-			    spec->adc_idx[idx]);
 	spec->cur_input = idx;
+	cs_update_input_select(codec);
 	return 1;
 }
 
@@ -919,10 +931,9 @@
 					spdif_present ? 0 : PIN_OUT);
 		}
 	}
-	if (spec->board_config == CS420X_MBP53 ||
-	    spec->board_config == CS420X_MBP55 ||
-	    spec->board_config == CS420X_IMAC27) {
-		unsigned int gpio = hp_present ? 0x02 : 0x08;
+	if (spec->gpio_eapd_hp) {
+		unsigned int gpio = hp_present ?
+			spec->gpio_eapd_hp : spec->gpio_eapd_speaker;
 		snd_hda_codec_write(codec, 0x01, 0,
 				    AC_VERB_SET_GPIO_DATA, gpio);
 	}
@@ -972,10 +983,7 @@
 		} else  {
 			spec->cur_input = spec->last_input;
 		}
-
-		snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
-					AC_VERB_SET_CONNECT_SEL,
-					spec->adc_idx[spec->cur_input]);
+		cs_update_input_select(codec);
 	} else {
 		if (present)
 			change_cur_input(codec, spec->automic_idx, 0);
@@ -1072,9 +1080,7 @@
 			cs_automic(codec);
 		else  {
 			spec->cur_adc = spec->adc_nid[spec->cur_input];
-			snd_hda_codec_write(codec, spec->cur_adc, 0,
-					AC_VERB_SET_CONNECT_SEL,
-					spec->adc_idx[spec->cur_input]);
+			cs_update_input_select(codec);
 		}
 	} else {
 		change_cur_input(codec, spec->cur_input, 1);
@@ -1272,6 +1278,7 @@
 	[CS420X_MBP53] = "mbp53",
 	[CS420X_MBP55] = "mbp55",
 	[CS420X_IMAC27] = "imac27",
+	[CS420X_APPLE] = "apple",
 	[CS420X_AUTO] = "auto",
 };
 
@@ -1281,7 +1288,13 @@
 	SND_PCI_QUIRK(0x10de, 0x0d94, "MacBookAir 3,1(2)", CS420X_MBP55),
 	SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55),
 	SND_PCI_QUIRK(0x10de, 0xcb89, "MacBookPro 7,1", CS420X_MBP55),
-	SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27),
+	/* this conflicts with too many other models */
+	/*SND_PCI_QUIRK(0x8086, 0x7270, "IMac 27 Inch", CS420X_IMAC27),*/
+	{} /* terminator */
+};
+
+static const struct snd_pci_quirk cs420x_codec_cfg_tbl[] = {
+	SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE),
 	{} /* terminator */
 };
 
@@ -1363,6 +1376,10 @@
 	spec->board_config =
 		snd_hda_check_board_config(codec, CS420X_MODELS,
 					   cs420x_models, cs420x_cfg_tbl);
+	if (spec->board_config < 0)
+		spec->board_config =
+			snd_hda_check_board_codec_sid_config(codec,
+				CS420X_MODELS, NULL, cs420x_codec_cfg_tbl);
 	if (spec->board_config >= 0)
 		fix_pincfg(codec, spec->board_config, cs_pincfgs);
 
@@ -1370,10 +1387,11 @@
 	case CS420X_IMAC27:
 	case CS420X_MBP53:
 	case CS420X_MBP55:
-		/* GPIO1 = headphones */
-		/* GPIO3 = speakers */
-		spec->gpio_mask = 0x0a;
-		spec->gpio_dir = 0x0a;
+	case CS420X_APPLE:
+		spec->gpio_eapd_hp = 2; /* GPIO1 = headphones */
+		spec->gpio_eapd_speaker = 8; /* GPIO3 = speakers */
+		spec->gpio_mask = spec->gpio_dir =
+			spec->gpio_eapd_hp | spec->gpio_eapd_speaker;
 		break;
 	}
 
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index cd2cf5e..b6767b4 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 0c8b5a1..0de2119 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 
@@ -3061,7 +3062,6 @@
 	SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS),
 	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
-	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
 		      CXT5066_LAPTOP),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 3425401..c505fd5 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include "hda_codec.h"
@@ -65,7 +65,11 @@
 	hda_nid_t pin_nid;
 	int num_mux_nids;
 	hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+
+	struct hda_codec *codec;
 	struct hdmi_eld sink_eld;
+	struct delayed_work work;
+	int repoll_count;
 };
 
 struct hdmi_spec {
@@ -745,8 +749,7 @@
  * Unsolicited events
  */
 
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);
 
 static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
@@ -755,7 +758,6 @@
 	int pd = !!(res & AC_UNSOL_RES_PD);
 	int eldv = !!(res & AC_UNSOL_RES_ELDV);
 	int pin_idx;
-	struct hdmi_eld *eld;
 
 	printk(KERN_INFO
 		"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
@@ -764,17 +766,8 @@
 	pin_idx = pin_nid_to_pin_index(spec, pin_nid);
 	if (pin_idx < 0)
 		return;
-	eld = &spec->pins[pin_idx].sink_eld;
 
-	hdmi_present_sense(codec, pin_nid, eld);
-
-	/*
-	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
-	 * in console or for audio devices. Assume the highest speakers
-	 * configuration, to _not_ prohibit multi-channel audio playback.
-	 */
-	if (!eld->spk_alloc)
-		eld->spk_alloc = 0xffff;
+	hdmi_present_sense(&spec->pins[pin_idx], 1);
 }
 
 static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
@@ -968,9 +961,11 @@
 	return 0;
 }
 
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
 {
+	struct hda_codec *codec = per_pin->codec;
+	struct hdmi_eld *eld = &per_pin->sink_eld;
+	hda_nid_t pin_nid = per_pin->pin_nid;
 	/*
 	 * Always execute a GetPinSense verb here, even when called from
 	 * hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
@@ -980,33 +975,48 @@
 	 * the unsolicited response to avoid custom WARs.
 	 */
 	int present = snd_hda_pin_sense(codec, pin_nid);
+	bool eld_valid = false;
 
-	memset(eld, 0, sizeof(*eld));
+	memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer));
 
 	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
 	if (eld->monitor_present)
-		eld->eld_valid	= !!(present & AC_PINSENSE_ELDV);
-	else
-		eld->eld_valid	= 0;
+		eld_valid	= !!(present & AC_PINSENSE_ELDV);
 
 	printk(KERN_INFO
 		"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+		codec->addr, pin_nid, eld->monitor_present, eld_valid);
 
-	if (eld->eld_valid)
+	if (eld_valid) {
 		if (!snd_hdmi_get_eld(eld, codec, pin_nid))
 			snd_hdmi_show_eld(eld);
+		else if (repoll) {
+			queue_delayed_work(codec->bus->workq,
+					   &per_pin->work,
+					   msecs_to_jiffies(300));
+		}
+	}
 
 	snd_hda_input_jack_report(codec, pin_nid);
 }
 
+static void hdmi_repoll_eld(struct work_struct *work)
+{
+	struct hdmi_spec_per_pin *per_pin =
+	container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
+
+	if (per_pin->repoll_count++ > 6)
+		per_pin->repoll_count = 0;
+
+	hdmi_present_sense(per_pin, per_pin->repoll_count);
+}
+
 static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 {
 	struct hdmi_spec *spec = codec->spec;
 	unsigned int caps, config;
 	int pin_idx;
 	struct hdmi_spec_per_pin *per_pin;
-	struct hdmi_eld *eld;
 	int err;
 
 	caps = snd_hda_param_read(codec, pin_nid, AC_PAR_PIN_CAP);
@@ -1023,7 +1033,6 @@
 
 	pin_idx = spec->num_pins;
 	per_pin = &spec->pins[pin_idx];
-	eld = &per_pin->sink_eld;
 
 	per_pin->pin_nid = pin_nid;
 
@@ -1230,7 +1239,7 @@
 	if (err < 0)
 		return err;
 
-	hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+	hdmi_present_sense(per_pin, 0);
 	return 0;
 }
 
@@ -1281,6 +1290,8 @@
 				    AC_VERB_SET_UNSOLICITED_ENABLE,
 				    AC_USRSP_EN | pin_nid);
 
+		per_pin->codec = codec;
+		INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
 		snd_hda_eld_proc_new(codec, eld, pin_idx);
 	}
 	return 0;
@@ -1295,10 +1306,12 @@
 		struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
 		struct hdmi_eld *eld = &per_pin->sink_eld;
 
+		cancel_delayed_work(&per_pin->work);
 		snd_hda_eld_proc_free(codec, eld);
 	}
 	snd_hda_input_jack_free(codec);
 
+	flush_workqueue(codec->bus->workq);
 	kfree(spec);
 }
 
@@ -1576,7 +1589,7 @@
 				     struct snd_pcm_substream *substream)
 {
 	int chs;
-	unsigned int dataDCC1, dataDCC2, channel_id;
+	unsigned int dataDCC2, channel_id;
 	int i;
 	struct hdmi_spec *spec = codec->spec;
 	struct hda_spdif_out *spdif =
@@ -1586,7 +1599,6 @@
 
 	chs = substream->runtime->channels;
 
-	dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
 	dataDCC2 = 0x2;
 
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8f93b97..cbde019 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include "hda_codec.h"
@@ -276,6 +277,12 @@
 	return false;
 }
 
+static inline hda_nid_t get_capsrc(struct alc_spec *spec, int idx)
+{
+	return spec->capsrc_nids ?
+		spec->capsrc_nids[idx] : spec->adc_nids[idx];
+}
+
 /* select the given imux item; either unmute exclusively or select the route */
 static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx,
 			  unsigned int idx, bool force)
@@ -283,7 +290,7 @@
 	struct alc_spec *spec = codec->spec;
 	const struct hda_input_mux *imux;
 	unsigned int mux_idx;
-	int i, type;
+	int i, type, num_conns;
 	hda_nid_t nid;
 
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
@@ -302,20 +309,20 @@
 		adc_idx = spec->dyn_adc_idx[idx];
 	}
 
-	nid = spec->capsrc_nids ?
-		spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
+	nid = get_capsrc(spec, adc_idx);
 
 	/* no selection? */
-	if (snd_hda_get_conn_list(codec, nid, NULL) <= 1)
+	num_conns = snd_hda_get_conn_list(codec, nid, NULL);
+	if (num_conns <= 1)
 		return 1;
 
 	type = get_wcaps_type(get_wcaps(codec, nid));
 	if (type == AC_WID_AUD_MIX) {
 		/* Matrix-mixer style (e.g. ALC882) */
-		for (i = 0; i < imux->num_items; i++) {
-			unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
-						 imux->items[i].index,
+		int active = imux->items[idx].index;
+		for (i = 0; i < num_conns; i++) {
+			unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE;
+			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i,
 						 HDA_AMP_MUTE, v);
 		}
 	} else {
@@ -1052,8 +1059,19 @@
 	spec->imux_pins[2] = spec->dock_mic_pin;
 	for (i = 0; i < 3; i++) {
 		strcpy(imux->items[i].label, texts[i]);
-		if (spec->imux_pins[i])
+		if (spec->imux_pins[i]) {
+			hda_nid_t pin = spec->imux_pins[i];
+			int c;
+			for (c = 0; c < spec->num_adc_nids; c++) {
+				hda_nid_t cap = get_capsrc(spec, c);
+				int idx = get_connection_index(codec, cap, pin);
+				if (idx >= 0) {
+					imux->items[i].index = idx;
+					break;
+				}
+			}
 			imux->num_items = i + 1;
+		}
 	}
 	spec->num_mux_defs = 1;
 	spec->input_mux = imux;
@@ -1450,7 +1468,7 @@
 		switch (fix->type) {
 		case ALC_FIXUP_SKU:
 			if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku)
-				break;;
+				break;
 			snd_printdd(KERN_INFO "hda_codec: %s: "
 				    "Apply sku override for %s\n",
 				    codec->chip_name, modelname);
@@ -1604,27 +1622,29 @@
 static void alc_auto_parse_digital(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	int i, err;
+	int i, err, nums;
 	hda_nid_t dig_nid;
 
 	/* support multiple SPDIFs; the secondary is set up as a slave */
+	nums = 0;
 	for (i = 0; i < spec->autocfg.dig_outs; i++) {
 		hda_nid_t conn[4];
 		err = snd_hda_get_connections(codec,
 					      spec->autocfg.dig_out_pins[i],
 					      conn, ARRAY_SIZE(conn));
-		if (err < 0)
+		if (err <= 0)
 			continue;
 		dig_nid = conn[0]; /* assume the first element is audio-out */
-		if (!i) {
+		if (!nums) {
 			spec->multiout.dig_out_nid = dig_nid;
 			spec->dig_out_type = spec->autocfg.dig_out_type[0];
 		} else {
 			spec->multiout.slave_dig_outs = spec->slave_dig_outs;
-			if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
+			if (nums >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
 				break;
-			spec->slave_dig_outs[i - 1] = dig_nid;
+			spec->slave_dig_outs[nums - 1] = dig_nid;
 		}
+		nums++;
 	}
 
 	if (spec->autocfg.dig_in_pin) {
@@ -1953,10 +1973,8 @@
 		if (!kctl)
 			kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
 		for (i = 0; kctl && i < kctl->count; i++) {
-			const hda_nid_t *nids = spec->capsrc_nids;
-			if (!nids)
-				nids = spec->adc_nids;
-			err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+			err = snd_hda_add_nid(codec, kctl, i,
+					      get_capsrc(spec, i));
 			if (err < 0)
 				return err;
 		}
@@ -2270,6 +2288,7 @@
 	struct alc_spec *spec = codec->spec;
 	struct hda_pcm *info = spec->pcm_rec;
 	const struct hda_pcm_stream *p;
+	bool have_multi_adcs;
 	int i;
 
 	codec->num_pcms = 1;
@@ -2348,8 +2367,11 @@
 	/* If the use of more than one ADC is requested for the current
 	 * model, configure a second analog capture-only PCM.
 	 */
+	have_multi_adcs = (spec->num_adc_nids > 1) &&
+		!spec->dyn_adc_switch && !spec->auto_mic &&
+		(!spec->input_mux || spec->input_mux->num_items > 1);
 	/* Additional Analaog capture for index #2 */
-	if (spec->alt_dac_nid || spec->num_adc_nids > 1) {
+	if (spec->alt_dac_nid || have_multi_adcs) {
 		codec->num_pcms = 3;
 		info = spec->pcm_rec + 2;
 		info->name = spec->stream_name_analog;
@@ -2365,7 +2387,7 @@
 				alc_pcm_null_stream;
 			info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
 		}
-		if (spec->num_adc_nids > 1) {
+		if (have_multi_adcs) {
 			p = spec->stream_analog_alt_capture;
 			if (!p)
 				p = &alc_pcm_analog_alt_capture;
@@ -2657,7 +2679,6 @@
 	hda_nid_t *adc_nids = spec->private_adc_nids;
 	hda_nid_t *cap_nids = spec->private_capsrc_nids;
 	int max_nums = ARRAY_SIZE(spec->private_adc_nids);
-	bool indep_capsrc = false;
 	int i, nums = 0;
 
 	nid = codec->start_nid;
@@ -2679,13 +2700,11 @@
 				break;
 			if (type == AC_WID_AUD_SEL) {
 				cap_nids[nums] = src;
-				indep_capsrc = true;
 				break;
 			}
 			n = snd_hda_get_conn_list(codec, src, &list);
 			if (n > 1) {
 				cap_nids[nums] = src;
-				indep_capsrc = true;
 				break;
 			} else if (n != 1)
 				break;
@@ -2742,8 +2761,7 @@
 		}
 
 		for (c = 0; c < num_adcs; c++) {
-			hda_nid_t cap = spec->capsrc_nids ?
-				spec->capsrc_nids[c] : spec->adc_nids[c];
+			hda_nid_t cap = get_capsrc(spec, c);
 			idx = get_connection_index(codec, cap, pin);
 			if (idx >= 0) {
 				spec->imux_pins[imux->num_items] = pin;
@@ -3326,6 +3344,12 @@
 	if (nid)
 		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
 				    AMP_OUT_ZERO);
+
+	/* unmute DAC if it's not assigned to a mixer */
+	nid = alc_look_for_out_mute_nid(codec, pin, dac);
+	if (nid == mix && nid_has_mute(codec, dac, HDA_OUTPUT))
+		snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+				    AMP_OUT_ZERO);
 }
 
 static void alc_auto_init_multi_out(struct hda_codec *codec)
@@ -3683,8 +3707,7 @@
 	if (!pin)
 		return 0;
 	for (i = 0; i < spec->num_adc_nids; i++) {
-		hda_nid_t cap = spec->capsrc_nids ?
-			spec->capsrc_nids[i] : spec->adc_nids[i];
+		hda_nid_t cap = get_capsrc(spec, i);
 		int idx;
 
 		idx = get_connection_index(codec, cap, pin);
diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c
index 2f55f32..6679a50 100644
--- a/sound/pci/hda/patch_si3054.c
+++ b/sound/pci/hda/patch_si3054.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 59a52a4..d8d2f9d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/asoundef.h>
 #include <sound/jack.h>
@@ -94,6 +95,7 @@
 	STAC_92HD83XXX_REF,
 	STAC_92HD83XXX_PWR_REF,
 	STAC_DELL_S14,
+	STAC_DELL_VOSTRO_3500,
 	STAC_92HD83XXX_HP,
 	STAC_92HD83XXX_HP_cNB11_INTQUAD,
 	STAC_HP_DV7_4000,
@@ -225,7 +227,6 @@
 
 	/* power management */
 	unsigned int num_pwrs;
-	const unsigned int *pwr_mapping;
 	const hda_nid_t *pwr_nids;
 	const hda_nid_t *dac_list;
 
@@ -372,18 +373,15 @@
 
 #define STAC92HD83_DAC_COUNT 3
 
-static const hda_nid_t stac92hd83xxx_pwr_nids[4] = {
-	0xa, 0xb, 0xd, 0xe,
+static const hda_nid_t stac92hd83xxx_pwr_nids[7] = {
+	0x0a, 0x0b, 0x0c, 0xd, 0x0e,
+	0x0f, 0x10
 };
 
 static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
 	0x1e, 0,
 };
 
-static const unsigned int stac92hd83xxx_pwr_mapping[4] = {
-	0x03, 0x0c, 0x20, 0x40,
-};
-
 static const hda_nid_t stac92hd83xxx_dmic_nids[] = {
 		0x11, 0x20,
 };
@@ -1643,6 +1641,8 @@
 		      "Alienware M17x", STAC_ALIENWARE_M17X),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
 		      "Alienware M17x", STAC_ALIENWARE_M17X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0490,
+		      "Alienware M17x", STAC_ALIENWARE_M17X),
 	{} /* terminator */
 };
 
@@ -1658,6 +1658,12 @@
 	0x40f000f0, 0x40f000f0,
 };
 
+static const unsigned int dell_vostro_3500_pin_configs[10] = {
+	0x02a11020, 0x0221101f, 0x400000f0, 0x90170110,
+	0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160,
+	0x400000f4, 0x400000f5,
+};
+
 static const unsigned int hp_dv7_4000_pin_configs[10] = {
 	0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
 	0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
@@ -1674,6 +1680,7 @@
 	[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
 	[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
 	[STAC_DELL_S14] = dell_s14_pin_configs,
+	[STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
 	[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
 };
@@ -1683,6 +1690,7 @@
 	[STAC_92HD83XXX_REF] = "ref",
 	[STAC_92HD83XXX_PWR_REF] = "mic-ref",
 	[STAC_DELL_S14] = "dell-s14",
+	[STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
 	[STAC_92HD83XXX_HP] = "hp",
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
 	[STAC_HP_DV7_4000] = "hp-dv7-4000",
@@ -1696,6 +1704,8 @@
 		      "DFI LanParty", STAC_92HD83XXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
 		      "unknown Dell", STAC_DELL_S14),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028,
+		      "Dell Vostro 3500", STAC_DELL_VOSTRO_3500),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
 			  "HP", STAC_92HD83XXX_HP),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656,
@@ -3791,9 +3801,10 @@
 }
 
 
-static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in)
+static int stac92xx_parse_auto_config(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t dig_out = 0, dig_in = 0;
 	int hp_swap = 0;
 	int i, err;
 
@@ -3976,6 +3987,22 @@
 	if (spec->multiout.max_channels > 2)
 		spec->surr_switch = 1;
 
+	/* find digital out and in converters */
+	for (i = codec->start_nid; i < codec->start_nid + codec->num_nodes; i++) {
+		unsigned int wid_caps = get_wcaps(codec, i);
+		if (wid_caps & AC_WCAP_DIGITAL) {
+			switch (get_wcaps_type(wid_caps)) {
+			case AC_WID_AUD_OUT:
+				if (!dig_out)
+					dig_out = i;
+				break;
+			case AC_WID_AUD_IN:
+				if (!dig_in)
+					dig_in = i;
+				break;
+			}
+		}
+	}
 	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = dig_out;
 	if (dig_in && spec->autocfg.dig_in_pin)
@@ -4414,7 +4441,9 @@
 		int pinctl, def_conf;
 
 		/* power on when no jack detection is available */
-		if (!spec->hp_detect) {
+		/* or when the VREF is used for controlling LED */
+		if (!spec->hp_detect ||
+		    (spec->gpio_led > 8 && spec->gpio_led == nid)) {
 			stac_toggle_power_map(codec, nid, 1);
 			continue;
 		}
@@ -4441,8 +4470,12 @@
 				stac_toggle_power_map(codec, nid, 1);
 			continue;
 		}
-		if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+		if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) {
 			stac_issue_unsol_event(codec, nid);
+			continue;
+		}
+		/* none of the above, turn the port OFF */
+		stac_toggle_power_map(codec, nid, 0);
 	}
 
 	/* sync mute LED */
@@ -4698,11 +4731,7 @@
 	if (idx >= spec->num_pwrs)
 		return;
 
-	/* several codecs have two power down bits */
-	if (spec->pwr_mapping)
-		idx = spec->pwr_mapping[idx];
-	else
-		idx = 1 << idx;
+	idx = 1 << idx;
 
 	val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
 	if (enable)
@@ -5028,20 +5057,6 @@
 	return 0;
 }
 
-static int stac92xx_post_suspend(struct hda_codec *codec)
-{
-	struct sigmatel_spec *spec = codec->spec;
-	if (spec->gpio_led > 8) {
-		/* with vref-out pin used for mute led control
-		 * codec AFG is prevented from D3 state, but on
-		 * system suspend it can (and should) be used
-		 */
-		snd_hda_codec_read(codec, codec->afg, 0,
-				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
-	}
-	return 0;
-}
-
 static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 				unsigned int power_state)
 {
@@ -5279,7 +5294,7 @@
 	spec->capvols = stac925x_capvols;
 	spec->capsws = stac925x_capsws;
 
-	err = stac92xx_parse_auto_config(codec, 0x8, 0x7);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -5420,7 +5435,7 @@
 	spec->num_pwrs = ARRAY_SIZE(stac92hd73xx_pwr_nids);
 	spec->pwr_nids = stac92hd73xx_pwr_nids;
 
-	err = stac92xx_parse_auto_config(codec, 0x25, 0x27);
+	err = stac92xx_parse_auto_config(codec);
 
 	if (!err) {
 		if (spec->board_config < 0) {
@@ -5600,9 +5615,6 @@
 		snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
 	}
 
-	/* reset pin power-down; Windows may leave these bits after reboot */
-	snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0);
-	snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0);
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
 
@@ -5612,7 +5624,6 @@
 	codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
 	spec->digbeep_nid = 0x21;
 	spec->pwr_nids = stac92hd83xxx_pwr_nids;
-	spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
 	spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
 	spec->multiout.dac_nids = spec->dac_nids;
 	spec->init = stac92hd83xxx_core_init;
@@ -5629,27 +5640,6 @@
 		stac92xx_set_config_regs(codec,
 				stac92hd83xxx_brd_tbl[spec->board_config]);
 
-	switch (codec->vendor_id) {
-	case 0x111d76d1:
-	case 0x111d76d9:
-	case 0x111d76df:
-	case 0x111d76e5:
-	case 0x111d7666:
-	case 0x111d7667:
-	case 0x111d7668:
-	case 0x111d7669:
-	case 0x111d76e3:
-	case 0x111d7604:
-	case 0x111d76d4:
-	case 0x111d7605:
-	case 0x111d76d5:
-	case 0x111d76e7:
-		if (spec->board_config == STAC_92HD83XXX_PWR_REF)
-			break;
-		spec->num_pwrs = 0;
-		break;
-	}
-
 	codec->patch_ops = stac92xx_patch_ops;
 
 	if (find_mute_led_gpio(codec, 0))
@@ -5666,8 +5656,6 @@
 		} else {
 			codec->patch_ops.set_power_state =
 					stac92xx_set_power_state;
-			codec->patch_ops.post_suspend =
-					stac92xx_post_suspend;
 		}
 		codec->patch_ops.pre_resume = stac92xx_pre_resume;
 		codec->patch_ops.check_power_status =
@@ -5675,7 +5663,7 @@
 	}
 #endif	
 
-	err = stac92xx_parse_auto_config(codec, 0x1d, 0);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -5858,8 +5846,6 @@
 		    (codec->revision_id & 0xf) == 1)
 			spec->stream_delay = 40; /* 40 milliseconds */
 
-		/* no output amps */
-		spec->num_pwrs = 0;
 		/* disable VSW */
 		spec->init = stac92hd71bxx_core_init;
 		unmute_init++;
@@ -5874,8 +5860,6 @@
 		if ((codec->revision_id & 0xf) == 1)
 			spec->stream_delay = 40; /* 40 milliseconds */
 
-		/* no output amps */
-		spec->num_pwrs = 0;
 		/* fallthru */
 	default:
 		spec->init = stac92hd71bxx_core_init;
@@ -5985,8 +5969,6 @@
 		} else {
 			codec->patch_ops.set_power_state =
 					stac92xx_set_power_state;
-			codec->patch_ops.post_suspend =
-					stac92xx_post_suspend;
 		}
 		codec->patch_ops.pre_resume = stac92xx_pre_resume;
 		codec->patch_ops.check_power_status =
@@ -5996,7 +5978,7 @@
 
 	spec->multiout.dac_nids = spec->dac_nids;
 
-	err = stac92xx_parse_auto_config(codec, 0x21, 0);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6105,7 +6087,7 @@
 
 	spec->multiout.dac_nids = spec->dac_nids;
 	
-	err = stac92xx_parse_auto_config(codec, 0x08, 0x09);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6230,7 +6212,7 @@
 	spec->aloopback_shift = 0;
 	spec->eapd_switch = 1;
 
-	err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6355,7 +6337,7 @@
 		break;
 	}
 
-	err = stac92xx_parse_auto_config(codec, 0x1f, 0x20);
+	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6460,7 +6442,7 @@
 	spec->capvols = stac9872_capvols;
 	spec->capsws = stac9872_capsws;
 
-	err = stac92xx_parse_auto_config(codec, 0x10, 0x12);
+	err = stac92xx_parse_auto_config(codec);
 	if (err < 0) {
 		stac92xx_free(codec);
 		return -EINVAL;
@@ -6565,6 +6547,18 @@
 	{ .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
 	{ .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
 	{ .id = 0x111d76e7, .name = "92HD90BXX", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76e8, .name = "92HD66B1X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76e9, .name = "92HD66B2X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76ea, .name = "92HD66B3X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76eb, .name = "92HD66C1X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76ec, .name = "92HD66C2X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76ed, .name = "92HD66C3X5", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76ee, .name = "92HD66B1X3", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76ef, .name = "92HD66B2X3", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76f0, .name = "92HD66B3X3", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76f1, .name = "92HD66C1X3", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76f2, .name = "92HD66C2X3", .patch = patch_stac92hd83xxx},
+	{ .id = 0x111d76f3, .name = "92HD66C3/65", .patch = patch_stac92hd83xxx},
 	{} /* terminator */
 };
 
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 417d62a..b513762 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -49,6 +49,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/asoundef.h>
 #include "hda_codec.h"
@@ -207,6 +208,7 @@
 	/* work to check hp jack state */
 	struct hda_codec *codec;
 	struct delayed_work vt1708_hp_work;
+	int hp_work_active;
 	int vt1708_jack_detect;
 	int vt1708_hp_present;
 
@@ -304,27 +306,35 @@
 static void analog_low_current_mode(struct hda_codec *codec);
 static bool is_aa_path_mute(struct hda_codec *codec);
 
-static void vt1708_start_hp_work(struct via_spec *spec)
-{
-	if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0)
-		return;
-	snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81,
-			    !spec->vt1708_jack_detect);
-	if (!delayed_work_pending(&spec->vt1708_hp_work))
-		schedule_delayed_work(&spec->vt1708_hp_work,
-				      msecs_to_jiffies(100));
-}
+#define hp_detect_with_aa(codec) \
+	(snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1 && \
+	 !is_aa_path_mute(codec))
 
 static void vt1708_stop_hp_work(struct via_spec *spec)
 {
 	if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0)
 		return;
-	if (snd_hda_get_bool_hint(spec->codec, "analog_loopback_hp_detect") == 1
-	    && !is_aa_path_mute(spec->codec))
+	if (spec->hp_work_active) {
+		snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 1);
+		cancel_delayed_work_sync(&spec->vt1708_hp_work);
+		spec->hp_work_active = 0;
+	}
+}
+
+static void vt1708_update_hp_work(struct via_spec *spec)
+{
+	if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0)
 		return;
-	snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81,
-			    !spec->vt1708_jack_detect);
-	cancel_delayed_work_sync(&spec->vt1708_hp_work);
+	if (spec->vt1708_jack_detect &&
+	    (spec->active_streams || hp_detect_with_aa(spec->codec))) {
+		if (!spec->hp_work_active) {
+			snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81, 0);
+			schedule_delayed_work(&spec->vt1708_hp_work,
+					      msecs_to_jiffies(100));
+			spec->hp_work_active = 1;
+		}
+	} else if (!hp_detect_with_aa(spec->codec))
+		vt1708_stop_hp_work(spec);
 }
 
 static void set_widgets_power_state(struct hda_codec *codec)
@@ -342,12 +352,7 @@
 
 	set_widgets_power_state(codec);
 	analog_low_current_mode(snd_kcontrol_chip(kcontrol));
-	if (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1) {
-		if (is_aa_path_mute(codec))
-			vt1708_start_hp_work(codec->spec);
-		else
-			vt1708_stop_hp_work(codec->spec);
-	}
+	vt1708_update_hp_work(codec->spec);
 	return change;
 }
 
@@ -1153,7 +1158,7 @@
 	spec->cur_dac_stream_tag = stream_tag;
 	spec->cur_dac_format = format;
 	mutex_unlock(&spec->config_mutex);
-	vt1708_start_hp_work(spec);
+	vt1708_update_hp_work(spec);
 	return 0;
 }
 
@@ -1173,7 +1178,7 @@
 	spec->cur_hp_stream_tag = stream_tag;
 	spec->cur_hp_format = format;
 	mutex_unlock(&spec->config_mutex);
-	vt1708_start_hp_work(spec);
+	vt1708_update_hp_work(spec);
 	return 0;
 }
 
@@ -1187,7 +1192,7 @@
 	snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
 	spec->active_streams &= ~STREAM_MULTI_OUT;
 	mutex_unlock(&spec->config_mutex);
-	vt1708_stop_hp_work(spec);
+	vt1708_update_hp_work(spec);
 	return 0;
 }
 
@@ -1202,7 +1207,7 @@
 		snd_hda_codec_setup_stream(codec, spec->hp_dac_nid, 0, 0, 0);
 	spec->active_streams &= ~STREAM_INDEP_HP;
 	mutex_unlock(&spec->config_mutex);
-	vt1708_stop_hp_work(spec);
+	vt1708_update_hp_work(spec);
 	return 0;
 }
 
@@ -1644,7 +1649,8 @@
 	int nums;
 	struct via_spec *spec = codec->spec;
 
-	if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0])
+	if (!spec->hp_independent_mode && spec->autocfg.hp_pins[0] &&
+	    (spec->codec_type != VT1708 || spec->vt1708_jack_detect))
 		present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
 
 	if (spec->smart51_enabled)
@@ -2611,8 +2617,6 @@
 
 	if (spec->codec_type != VT1708)
 		return 0;
-	spec->vt1708_jack_detect =
-		!((snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8) & 0x1);
 	ucontrol->value.integer.value[0] = spec->vt1708_jack_detect;
 	return 0;
 }
@@ -2622,18 +2626,22 @@
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct via_spec *spec = codec->spec;
-	int change;
+	int val;
 
 	if (spec->codec_type != VT1708)
 		return 0;
-	spec->vt1708_jack_detect = ucontrol->value.integer.value[0];
-	change = (0x1 & (snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8))
-		== !spec->vt1708_jack_detect;
-	if (spec->vt1708_jack_detect) {
+	val = !!ucontrol->value.integer.value[0];
+	if (spec->vt1708_jack_detect == val)
+		return 0;
+	spec->vt1708_jack_detect = val;
+	if (spec->vt1708_jack_detect &&
+	    snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") != 1) {
 		mute_aa_path(codec, 1);
 		notify_aa_path_ctls(codec);
 	}
-	return change;
+	via_hp_automute(codec);
+	vt1708_update_hp_work(spec);
+	return 1;
 }
 
 static const struct snd_kcontrol_new vt1708_jack_detect_ctl = {
@@ -2770,6 +2778,7 @@
 	via_auto_init_unsol_event(codec);
 
 	via_hp_automute(codec);
+	vt1708_update_hp_work(spec);
 
 	return 0;
 }
@@ -2786,7 +2795,9 @@
 		spec->vt1708_hp_present ^= 1;
 		via_hp_automute(spec->codec);
 	}
-	vt1708_start_hp_work(spec);
+	if (spec->vt1708_jack_detect)
+		schedule_delayed_work(&spec->vt1708_hp_work,
+				      msecs_to_jiffies(100));
 }
 
 static int get_mux_nids(struct hda_codec *codec)
@@ -3700,13 +3711,8 @@
 static void set_widgets_power_state_vt1812(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
-	int imux_is_smixer =
-	snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 3;
 	unsigned int parm;
 	unsigned int present;
-	/* MUX10 (1eh) = stereo mixer */
-	imux_is_smixer =
-	snd_hda_codec_read(codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 5;
 	/* inputs */
 	/* PW 5/6/7 (29h/2ah/2bh) */
 	parm = AC_PWRST_D3;
diff --git a/sound/pci/ice1712/ak4xxx.c b/sound/pci/ice1712/ak4xxx.c
index 90d560c..3981823 100644
--- a/sound/pci/ice1712/ak4xxx.c
+++ b/sound/pci/ice1712/ak4xxx.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include "ice1712.h"
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 8531b98..44446f2 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -54,7 +54,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index c2b7f8b..4353e76 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 6a5b387..11718b49 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -32,7 +32,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/ac97_codec.h>
@@ -42,6 +42,12 @@
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
 
+#ifdef CONFIG_KVM_GUEST
+#include <linux/kvm_para.h>
+#else
+#define kvm_para_available() (0)
+#endif
+
 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
 MODULE_DESCRIPTION("Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455");
 MODULE_LICENSE("GPL");
@@ -77,6 +83,7 @@
 static int buggy_irq = -1; /* auto-check */
 static int xbox;
 static int spdif_aclink = -1;
+static int inside_vm = -1;
 
 module_param(index, int, 0444);
 MODULE_PARM_DESC(index, "Index value for Intel i8x0 soundcard.");
@@ -94,6 +101,8 @@
 MODULE_PARM_DESC(xbox, "Set to 1 for Xbox, if you have problems with the AC'97 codec detection.");
 module_param(spdif_aclink, int, 0444);
 MODULE_PARM_DESC(spdif_aclink, "S/PDIF over AC-link.");
+module_param(inside_vm, bool, 0444);
+MODULE_PARM_DESC(inside_vm, "KVM/Parallels optimization.");
 
 /* just for backward compatibility */
 static int enable;
@@ -400,6 +409,7 @@
 	unsigned buggy_irq: 1;		/* workaround for buggy mobos */
 	unsigned xbox: 1;		/* workaround for Xbox AC'97 detection */
 	unsigned buggy_semaphore: 1;	/* workaround for buggy codec semaphore */
+	unsigned inside_vm: 1;		/* enable VM optimization */
 
 	int spdif_idx;	/* SPDIF BAR index; *_SPBAR or -1 if use PCMOUT */
 	unsigned int sdm_saved;	/* SDM reg value */
@@ -1065,8 +1075,18 @@
 			udelay(10);
 			continue;
 		}
-		if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
-		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+		if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
+			continue;
+
+		/* IO read operation is very expensive inside virtual machine
+		 * as it is emulated. The probability that subsequent PICB read
+		 * will return different result is high enough to loop till
+		 * timeout here.
+		 * Same CIV is strict enough condition to be sure that PICB
+		 * is valid inside VM on emulated card. */
+		if (chip->inside_vm)
+			break;
+		if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
 	ptr = ichdev->last_pos;
@@ -2917,6 +2937,45 @@
 	ICH_PCR, ICH_SCR, ICH_SIS_TCR
 };
 
+static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci)
+{
+	int result  = inside_vm;
+	char *msg   = NULL;
+
+	/* check module parameter first (override detection) */
+	if (result >= 0) {
+		msg = result ? "enable (forced) VM" : "disable (forced) VM";
+		goto fini;
+	}
+
+	/* detect KVM and Parallels virtual environments */
+	result = kvm_para_available();
+#ifdef X86_FEATURE_HYPERVISOR
+	result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+	if (!result)
+		goto fini;
+
+	/* check for known (emulated) devices */
+	if (pci->subsystem_vendor == 0x1af4 &&
+	    pci->subsystem_device == 0x1100) {
+		/* KVM emulated sound, PCI SSID: 1af4:1100 */
+		msg = "enable KVM";
+	} else if (pci->subsystem_vendor == 0x1ab8) {
+		/* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */
+		msg = "enable Parallels VM";
+	} else {
+		msg = "disable (unknown or VT-d) VM";
+		result = 0;
+	}
+
+fini:
+	if (msg != NULL)
+		printk(KERN_INFO "intel8x0: %s optimization\n", msg);
+
+	return result;
+}
+
 static int __devinit snd_intel8x0_create(struct snd_card *card,
 					 struct pci_dev *pci,
 					 unsigned long device_type,
@@ -2984,6 +3043,8 @@
 	if (xbox)
 		chip->xbox = 1;
 
+	chip->inside_vm = snd_intel8x0_inside_vm(pci);
+
 	if (pci->vendor == PCI_VENDOR_ID_INTEL &&
 	    pci->device == PCI_DEVICE_ID_INTEL_440MX)
 		chip->fix_nocache = 1; /* enable workaround */
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 7c16164..0f7041e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -29,7 +29,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/ac97_codec.h>
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index fc1d573c..841864b 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 
diff --git a/sound/pci/lola/lola.c b/sound/pci/lola/lola.c
index 3e92e5b..924168e 100644
--- a/sound/pci/lola/lola.c
+++ b/sound/pci/lola/lola.c
@@ -20,7 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff --git a/sound/pci/lx6464es/lx_core.c b/sound/pci/lx6464es/lx_core.c
index 5c8717e..8c3e7fc 100644
--- a/sound/pci/lx6464es/lx_core.c
+++ b/sound/pci/lx6464es/lx_core.c
@@ -78,10 +78,15 @@
 	return ioread32(address);
 }
 
-void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len)
+static void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data,
+			       u32 len)
 {
-	void __iomem *address = lx_dsp_register(chip, port);
-	memcpy_fromio(data, address, len*sizeof(u32));
+	u32 __iomem *address = lx_dsp_register(chip, port);
+	int i;
+
+	/* we cannot use memcpy_fromio */
+	for (i = 0; i != len; ++i)
+		data[i] = ioread32(address + i);
 }
 
 
@@ -91,11 +96,15 @@
 	iowrite32(data, address);
 }
 
-void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
-			 u32 len)
+static void lx_dsp_reg_writebuf(struct lx6464es *chip, int port,
+				const u32 *data, u32 len)
 {
-	void __iomem *address = lx_dsp_register(chip, port);
-	memcpy_toio(address, data, len*sizeof(u32));
+	u32 __iomem *address = lx_dsp_register(chip, port);
+	int i;
+
+	/* we cannot use memcpy_to */
+	for (i = 0; i != len; ++i)
+		iowrite32(data[i], address + i);
 }
 
 
diff --git a/sound/pci/lx6464es/lx_core.h b/sound/pci/lx6464es/lx_core.h
index 1dd5629..4d7ff79 100644
--- a/sound/pci/lx6464es/lx_core.h
+++ b/sound/pci/lx6464es/lx_core.h
@@ -72,10 +72,7 @@
 };
 
 unsigned long lx_dsp_reg_read(struct lx6464es *chip, int port);
-void lx_dsp_reg_readbuf(struct lx6464es *chip, int port, u32 *data, u32 len);
 void lx_dsp_reg_write(struct lx6464es *chip, int port, unsigned data);
-void lx_dsp_reg_writebuf(struct lx6464es *chip, int port, const u32 *data,
-			 u32 len);
 
 /* plx register access */
 enum {
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 2fd4bf2..863c8bd 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -39,7 +39,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/input.h>
 #include <sound/core.h>
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index dbee599..a0bd1d9 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 
diff --git a/sound/pci/mixart/mixart_hwdep.c b/sound/pci/mixart/mixart_hwdep.c
index bf2696a..bfbdc91 100644
--- a/sound/pci/mixart/mixart_hwdep.c
+++ b/sound/pci/mixart/mixart_hwdep.c
@@ -25,6 +25,7 @@
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include "mixart.h"
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 83ea7a7..c6c45d9 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -30,7 +30,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 218d985..5f3a13d 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -51,6 +51,7 @@
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <sound/ac97_codec.h>
 #include <sound/control.h>
 #include <sound/core.h>
diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c
index f5164b1..521eae4 100644
--- a/sound/pci/oxygen/oxygen_io.c
+++ b/sound/pci/oxygen/oxygen_io.c
@@ -19,6 +19,7 @@
 
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/mpu401.h>
 #include <asm/io.h>
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 53e5508..92e2d67 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -22,6 +22,7 @@
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/ac97_codec.h>
 #include <sound/asoundef.h>
 #include <sound/core.h>
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 773db79..4149a0c 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -19,6 +19,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 046578d..56a5265 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -27,7 +27,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c
index 17cb123..ec1587c 100644
--- a/sound/pci/pcxhr/pcxhr_hwdep.c
+++ b/sound/pci/pcxhr/pcxhr_hwdep.c
@@ -24,6 +24,7 @@
 #include <linux/vmalloc.h>
 #include <linux/firmware.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include <sound/hwdep.h>
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 88cc776..dcbedd3 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -98,6 +98,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index 6be77a2..21bcb47 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -74,7 +74,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 409e5b8..4585c97 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 1c6d1e1..f2a3758 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -26,7 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/firmware.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/math64.h>
 
 #include <sound/core.h>
@@ -151,7 +151,7 @@
 #define HDSP_PROGRAM	        0x020
 #define HDSP_CONFIG_MODE_0	0x040
 #define HDSP_CONFIG_MODE_1	0x080
-#define HDSP_VERSION_BIT	0x100
+#define HDSP_VERSION_BIT	(0x100 | HDSP_S_LOAD)
 #define HDSP_BIGENDIAN_MODE     0x200
 #define HDSP_RD_MULTIPLE        0x400
 #define HDSP_9652_ENABLE_MIXER  0x800
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 6e2f7ef..19ee220 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -41,7 +41,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/math64.h>
@@ -520,16 +520,9 @@
 #define HDSPM_DMA_AREA_BYTES (HDSPM_MAX_CHANNELS * HDSPM_CHANNEL_BUFFER_BYTES)
 #define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024)
 
-/* revisions >= 230 indicate AES32 card */
-#define HDSPM_MADI_ANCIENT_REV	204
-#define HDSPM_MADI_OLD_REV	207
-#define HDSPM_MADI_REV		210
 #define HDSPM_RAYDAT_REV	211
 #define HDSPM_AIO_REV		212
 #define HDSPM_MADIFACE_REV	213
-#define HDSPM_AES_REV		240
-#define HDSPM_AES32_REV		234
-#define HDSPM_AES32_OLD_REV	233
 
 /* speed factor modes */
 #define HDSPM_SPEED_SINGLE 0
@@ -6253,7 +6246,7 @@
 			status.card_specific.madi.madi_input =
 				(statusregister & HDSPM_AB_int) ? 1 : 0;
 			status.card_specific.madi.channel_format =
-				(statusregister & HDSPM_TX_64ch) ? 1 : 0;
+				(statusregister & HDSPM_RX_64ch) ? 1 : 0;
 			/* TODO: Mac driver sets it when f_s>48kHz */
 			status.card_specific.madi.frame_format = 0;
 
@@ -6503,13 +6496,6 @@
 	strcpy(card->driver, "HDSPM");
 
 	switch (hdspm->firmware_rev) {
-	case HDSPM_MADI_REV:
-	case HDSPM_MADI_OLD_REV:
-	case HDSPM_MADI_ANCIENT_REV:
-		hdspm->io_type = MADI;
-		hdspm->card_name = "RME MADI";
-		hdspm->midiPorts = 3;
-		break;
 	case HDSPM_RAYDAT_REV:
 		hdspm->io_type = RayDAT;
 		hdspm->card_name = "RME RayDAT";
@@ -6525,17 +6511,25 @@
 		hdspm->card_name = "RME MADIface";
 		hdspm->midiPorts = 1;
 		break;
-	case HDSPM_AES_REV:
-	case HDSPM_AES32_REV:
-	case HDSPM_AES32_OLD_REV:
-		hdspm->io_type = AES32;
-		hdspm->card_name = "RME AES32";
-		hdspm->midiPorts = 2;
-		break;
 	default:
-		snd_printk(KERN_ERR "HDSPM: unknown firmware revision %x\n",
+		if ((hdspm->firmware_rev == 0xf0) ||
+			((hdspm->firmware_rev >= 0xe6) &&
+					(hdspm->firmware_rev <= 0xea))) {
+			hdspm->io_type = AES32;
+			hdspm->card_name = "RME AES32";
+			hdspm->midiPorts = 2;
+		} else if ((hdspm->firmware_rev == 0xd2) ||
+			((hdspm->firmware_rev >= 0xc8)  &&
+				(hdspm->firmware_rev <= 0xcf))) {
+			hdspm->io_type = MADI;
+			hdspm->card_name = "RME MADI";
+			hdspm->midiPorts = 3;
+		} else {
+			snd_printk(KERN_ERR
+				"HDSPM: unknown firmware revision %x\n",
 				hdspm->firmware_rev);
-		return -ENODEV;
+			return -ENODEV;
+		}
 	}
 
 	err = pci_enable_device(pci);
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index 1c7bc1e..732c5e8 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index 5ffb20b..a391e62 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <linux/time.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <sound/core.h>
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index c500816..31b6ad3 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -28,7 +28,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 
 #include <sound/core.h>
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index 5e707ef..deb04b9 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/trident.h>
 #include <sound/initval.h>
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 5bd57a7..61d3c0e 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -35,6 +35,7 @@
 #include <linux/vmalloc.h>
 #include <linux/gameport.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <sound/core.h>
 #include <sound/info.h>
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index c3656ff..ae98d56 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -53,7 +53,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/gameport.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index a386dd9..80a9c2b 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -37,7 +37,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index 5342d5e..6765822 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -22,7 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 3253b04..e97ddca 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -22,7 +22,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/time.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/ymfpci.h>
 #include <sound/mpu401.h>
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 66ea71b..03ee4e3 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 66488a7..6af41d2 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -20,7 +20,7 @@
 
 #include <sound/core.h>
 #include <linux/slab.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/cisreg.h>
 #include "pdaudiocf.h"
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 31777d1..9e361c9 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -20,7 +20,7 @@
 
 
 #include <linux/init.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <sound/core.h>
 #include "vxpocket.h"
diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c
index a2b69b8..6564569 100644
--- a/sound/ppc/powermac.c
+++ b/sound/ppc/powermac.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include "pmac.h"
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index 775bd95..1aa52ef 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <sound/asound.h>
 #include <sound/control.h>
@@ -875,7 +876,7 @@
 		(0x0fUL << 12) |
 		(PS3_AUDIO_IOID);
 
-	ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0);
+	ret = lv1_gpu_attribute(0x100, 0x007, val);
 	if (ret)
 		pr_info("%s: gpu_attribute failed %d\n", __func__,
 			ret);
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 94c6ea7..1120ca4 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -29,7 +29,7 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/wait.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/firmware.h>
 #include <linux/timer.h>
diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
index 68e0dee..56bcb46a 100644
--- a/sound/sh/sh_dac_audio.c
+++ b/sound/sh/sh_dac_audio.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index bee3c94..d1fcc81 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -1,6 +1,6 @@
 config SND_ATMEL_SOC
 	tristate "SoC Audio for the Atmel System-on-Chip"
-	depends on ARCH_AT91 || AVR32
+	depends on ARCH_AT91
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the ATMEL SSC interface. You will also need
@@ -24,25 +24,6 @@
 	  Say Y if you want to add support for SoC audio on WM8731-based
 	  AT91sam9g20 evaluation board.
 
-config SND_AT32_SOC_PLAYPAQ
-        tristate "SoC Audio support for PlayPaq with WM8510"
-        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
-        select SND_ATMEL_SOC_SSC
-        select SND_SOC_WM8510
-        help
-          Say Y or M here if you want to add support for SoC audio
-          on the LRS PlayPaq.
-
-config SND_AT32_SOC_PLAYPAQ_SLAVE
-        bool "Run CODEC on PlayPaq in slave mode"
-        depends on SND_AT32_SOC_PLAYPAQ
-        default n
-        help
-          Say Y if you want to run with the AT32 SSC generating the BCLK
-          and FRAME signals on the PlayPaq.  Unless you want to play
-          with the AT32 as the SSC master, you probably want to say N here,
-          as this will give you better sound quality.
-
 config SND_AT91_SOC_AFEB9260
 	tristate "SoC Audio support for AFEB9260 board"
 	depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index e7ea56b..a5c0bf1 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -8,9 +8,5 @@
 # AT91 Machine Support
 snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
 
-# AT32 Machine Support
-snd-soc-playpaq-objs := playpaq_wm8510.o
-
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
-obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
 obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
deleted file mode 100644
index 73ae99a..0000000
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/* sound/soc/at32/playpaq_wm8510.c
- * ASoC machine driver for PlayPaq using WM8510 codec
- *
- * Copyright (C) 2008 Long Range Systems
- *    Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
- *
- * NOTE: If you don't have the AT32 enhanced portmux configured (which
- * isn't currently in the mainline or Atmel patched kernel), you will
- * need to set the MCLK pin (PA30) to peripheral A in your board initialization
- * code.  Something like:
- *	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
- *
- */
-
-/* #define DEBUG */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/portmux.h>
-
-#include "../codecs/wm8510.h"
-#include "atmel-pcm.h"
-#include "atmel_ssc_dai.h"
-
-
-/*-------------------------------------------------------------------------*\
- * constants
-\*-------------------------------------------------------------------------*/
-#define MCLK_PIN		GPIO_PIN_PA(30)
-#define MCLK_PERIPH		GPIO_PERIPH_A
-
-
-/*-------------------------------------------------------------------------*\
- * data types
-\*-------------------------------------------------------------------------*/
-/* SSC clocking data */
-struct ssc_clock_data {
-	/* CMR div */
-	unsigned int cmr_div;
-
-	/* Frame period (as needed by xCMR.PERIOD) */
-	unsigned int period;
-
-	/* The SSC clock rate these settings where calculated for */
-	unsigned long ssc_rate;
-};
-
-
-/*-------------------------------------------------------------------------*\
- * module data
-\*-------------------------------------------------------------------------*/
-static struct clk *_gclk0;
-static struct clk *_pll0;
-
-#define CODEC_CLK (_gclk0)
-
-
-/*-------------------------------------------------------------------------*\
- * Sound SOC operations
-\*-------------------------------------------------------------------------*/
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
-	struct snd_pcm_hw_params *params,
-	struct snd_soc_dai *cpu_dai)
-{
-	struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
-	struct ssc_device *ssc = ssc_p->ssc;
-	struct ssc_clock_data cd;
-	unsigned int rate, width_bits, channels;
-	unsigned int bitrate, ssc_div;
-	unsigned actual_rate;
-
-
-	/*
-	 * Figure out required bitrate
-	 */
-	rate = params_rate(params);
-	channels = params_channels(params);
-	width_bits = snd_pcm_format_physical_width(params_format(params));
-	bitrate = rate * width_bits * channels;
-
-
-	/*
-	 * Figure out required SSC divider and period for required bitrate
-	 */
-	cd.ssc_rate = clk_get_rate(ssc->clk);
-	ssc_div = cd.ssc_rate / bitrate;
-	cd.cmr_div = ssc_div / 2;
-	if (ssc_div & 1) {
-		/* round cmr_div up */
-		cd.cmr_div++;
-	}
-	cd.period = width_bits - 1;
-
-
-	/*
-	 * Find actual rate, compare to requested rate
-	 */
-	actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
-	pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
-		 rate, actual_rate);
-
-
-	return cd;
-}
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
-
-static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
-				    struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
-	struct ssc_device *ssc = ssc_p->ssc;
-	unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
-	int ret;
-
-
-	/* Due to difficulties with getting the correct clocks from the AT32's
-	 * PLL0, we're going to let the CODEC be in charge of all the clocks
-	 */
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-	const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
-#else
-	struct ssc_clock_data cd;
-	const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBS_CFS);
-#endif
-
-	if (ssc == NULL) {
-		pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
-		return -EINVAL;
-	}
-
-
-	/*
-	 * Figure out PLL and BCLK dividers for WM8510
-	 */
-	switch (params_rate(params)) {
-	case 48000:
-		pll_out = 24576000;
-		mclk_div = WM8510_MCLKDIV_2;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	case 44100:
-		pll_out = 22579200;
-		mclk_div = WM8510_MCLKDIV_2;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	case 22050:
-		pll_out = 22579200;
-		mclk_div = WM8510_MCLKDIV_4;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	case 16000:
-		pll_out = 24576000;
-		mclk_div = WM8510_MCLKDIV_6;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	case 11025:
-		pll_out = 22579200;
-		mclk_div = WM8510_MCLKDIV_8;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	case 8000:
-		pll_out = 24576000;
-		mclk_div = WM8510_MCLKDIV_12;
-		bclk = WM8510_BCLKDIV_8;
-		break;
-
-	default:
-		pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
-			   params_rate(params));
-		return -EINVAL;
-	}
-
-
-	/*
-	 * set CPU and CODEC DAI configuration
-	 */
-	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: "
-			   "Failed to set CODEC DAI format (%d)\n",
-			   ret);
-		return ret;
-	}
-	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: "
-			   "Failed to set CPU DAI format (%d)\n",
-			   ret);
-		return ret;
-	}
-
-
-	/*
-	 * Set CPU clock configuration
-	 */
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-	cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
-	pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
-		 cd.cmr_div, cd.period);
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
-			   ret);
-		return ret;
-	}
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
-					  cd.period);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: "
-			   "Failed to set CPU transmit period (%d)\n",
-			   ret);
-		return ret;
-	}
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
-	/*
-	 * Set CODEC clock configuration
-	 */
-	pr_debug("playpaq_wm8510: "
-		 "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
-		 clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
-
-
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
-	if (ret < 0) {
-		pr_warning
-		    ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
-		     ret);
-		return ret;
-	}
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
-	ret = snd_soc_dai_set_pll(codec_dai, 0, 0,
-					 clk_get_rate(CODEC_CLK), pll_out);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
-			   ret);
-		return ret;
-	}
-
-
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
-	if (ret < 0) {
-		pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
-			   ret);
-		return ret;
-	}
-
-
-	return 0;
-}
-
-
-
-static struct snd_soc_ops playpaq_wm8510_ops = {
-	.hw_params = playpaq_wm8510_hw_params,
-};
-
-
-
-static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
-	SND_SOC_DAPM_MIC("Int Mic", NULL),
-	SND_SOC_DAPM_SPK("Ext Spk", NULL),
-};
-
-
-
-static const struct snd_soc_dapm_route intercon[] = {
-	/* speaker connected to SPKOUT */
-	{"Ext Spk", NULL, "SPKOUTP"},
-	{"Ext Spk", NULL, "SPKOUTN"},
-
-	{"Mic Bias", NULL, "Int Mic"},
-	{"MICN", NULL, "Mic Bias"},
-	{"MICP", NULL, "Mic Bias"},
-};
-
-
-
-static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-	int i;
-
-	/*
-	 * Add DAPM widgets
-	 */
-	for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
-		snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]);
-
-
-
-	/*
-	 * Setup audio path interconnects
-	 */
-	snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
-
-
-	/* always connected pins */
-	snd_soc_dapm_enable_pin(dapm, "Int Mic");
-	snd_soc_dapm_enable_pin(dapm, "Ext Spk");
-
-
-
-	/* Make CSB show PLL rate */
-	snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV,
-				       WM8510_OPCLKDIV_1 | 4);
-
-	return 0;
-}
-
-
-
-static struct snd_soc_dai_link playpaq_wm8510_dai = {
-	.name = "WM8510",
-	.stream_name = "WM8510 PCM",
-	.cpu_dai_name= "atmel-ssc-dai.0",
-	.platform_name = "atmel-pcm-audio",
-	.codec_name = "wm8510-codec.0-0x1a",
-	.codec_dai_name = "wm8510-hifi",
-	.init = playpaq_wm8510_init,
-	.ops = &playpaq_wm8510_ops,
-};
-
-
-
-static struct snd_soc_card snd_soc_playpaq = {
-	.name = "LRS_PlayPaq_WM8510",
-	.dai_link = &playpaq_wm8510_dai,
-	.num_links = 1,
-};
-
-static struct platform_device *playpaq_snd_device;
-
-
-static int __init playpaq_asoc_init(void)
-{
-	int ret = 0;
-
-	/*
-	 * Configure MCLK for WM8510
-	 */
-	_gclk0 = clk_get(NULL, "gclk0");
-	if (IS_ERR(_gclk0)) {
-		_gclk0 = NULL;
-		ret = PTR_ERR(_gclk0);
-		goto err_gclk0;
-	}
-	_pll0 = clk_get(NULL, "pll0");
-	if (IS_ERR(_pll0)) {
-		_pll0 = NULL;
-		ret = PTR_ERR(_pll0);
-		goto err_pll0;
-	}
-	ret = clk_set_parent(_gclk0, _pll0);
-	if (ret) {
-		pr_warning("snd-soc-playpaq: "
-			   "Failed to set PLL0 as parent for DAC clock\n");
-		goto err_set_clk;
-	}
-	clk_set_rate(CODEC_CLK, 12000000);
-	clk_enable(CODEC_CLK);
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
-	at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
-#endif
-
-
-	/*
-	 * Create and register platform device
-	 */
-	playpaq_snd_device = platform_device_alloc("soc-audio", 0);
-	if (playpaq_snd_device == NULL) {
-		ret = -ENOMEM;
-		goto err_device_alloc;
-	}
-
-	platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq);
-
-	ret = platform_device_add(playpaq_snd_device);
-	if (ret) {
-		pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
-			   ret);
-		goto err_device_add;
-	}
-
-	return 0;
-
-
-err_device_add:
-	if (playpaq_snd_device != NULL) {
-		platform_device_put(playpaq_snd_device);
-		playpaq_snd_device = NULL;
-	}
-err_device_alloc:
-err_set_clk:
-	if (_pll0 != NULL) {
-		clk_put(_pll0);
-		_pll0 = NULL;
-	}
-err_pll0:
-	if (_gclk0 != NULL) {
-		clk_put(_gclk0);
-		_gclk0 = NULL;
-	}
-	return ret;
-}
-
-
-static void __exit playpaq_asoc_exit(void)
-{
-	if (_gclk0 != NULL) {
-		clk_put(_gclk0);
-		_gclk0 = NULL;
-	}
-	if (_pll0 != NULL) {
-		clk_put(_pll0);
-		_pll0 = NULL;
-	}
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
-	at32_free_pin(MCLK_PIN);
-#endif
-
-	platform_device_unregister(playpaq_snd_device);
-	playpaq_snd_device = NULL;
-}
-
-module_init(playpaq_asoc_init);
-module_exit(playpaq_asoc_exit);
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig
index 6d59254..e908a81 100644
--- a/sound/soc/au1x/Kconfig
+++ b/sound/soc/au1x/Kconfig
@@ -3,7 +3,7 @@
 ##
 config SND_SOC_AU1XPSC
 	tristate "SoC Audio for Au1200/Au1250/Au1550"
-	depends on SOC_AU1200 || SOC_AU1550
+	depends on MIPS_ALCHEMY
 	help
 	  This option enables support for the Programmable Serial
 	  Controllers in AC97 and I2S mode, and the Descriptor-Based DMA
diff --git a/sound/soc/blackfin/bf5xx-sport.c b/sound/soc/blackfin/bf5xx-sport.c
index a2d4034..2fd9f2a 100644
--- a/sound/soc/blackfin/bf5xx-sport.c
+++ b/sound/soc/blackfin/bf5xx-sport.c
@@ -33,6 +33,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/bug.h>
+#include <linux/module.h>
 #include <asm/portmux.h>
 #include <asm/dma.h>
 #include <asm/blackfin.h>
diff --git a/sound/soc/blackfin/bfin-eval-adav80x.c b/sound/soc/blackfin/bfin-eval-adav80x.c
index 8d014d0..897cfa6 100644
--- a/sound/soc/blackfin/bfin-eval-adav80x.c
+++ b/sound/soc/blackfin/bfin-eval-adav80x.c
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index 3c08793..e715186 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/ac97_codec.h>
diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h
index 444747f..dd7be0d 100644
--- a/sound/soc/codecs/ad1836.h
+++ b/sound/soc/codecs/ad1836.h
@@ -34,7 +34,7 @@
 
 #define AD1836_ADC_CTRL2               13
 #define AD1836_ADC_WORD_LEN_MASK       0x30
-#define AD1836_ADC_WORD_OFFSET         5
+#define AD1836_ADC_WORD_OFFSET         4
 #define AD1836_ADC_SERFMT_MASK         (7 << 6)
 #define AD1836_ADC_SERFMT_PCK256       (0x4 << 6)
 #define AD1836_ADC_SERFMT_PCK128       (0x5 << 6)
diff --git a/sound/soc/codecs/adau1373.c b/sound/soc/codecs/adau1373.c
index 1ccf8dd..45c6302 100644
--- a/sound/soc/codecs/adau1373.c
+++ b/sound/soc/codecs/adau1373.c
@@ -245,7 +245,7 @@
 };
 
 static const unsigned int adau1373_bass_tlv[] = {
-	TLV_DB_RANGE_HEAD(4),
+	TLV_DB_RANGE_HEAD(3),
 	0, 2, TLV_DB_SCALE_ITEM(-600, 600, 1),
 	3, 4, TLV_DB_SCALE_ITEM(950, 250, 0),
 	5, 7, TLV_DB_SCALE_ITEM(1400, 150, 0),
diff --git a/sound/soc/codecs/ads117x.c b/sound/soc/codecs/ads117x.c
index 8402854..9082e0f 100644
--- a/sound/soc/codecs/ads117x.c
+++ b/sound/soc/codecs/ads117x.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index d8fc044..12c1bde 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index f1f237e..73f46eb 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -601,7 +601,6 @@
 static int cs4270_soc_resume(struct snd_soc_codec *codec)
 {
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	struct i2c_client *i2c_client = to_i2c_client(codec->dev);
 	int reg;
 
 	regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
@@ -612,14 +611,7 @@
 	ndelay(500);
 
 	/* first restore the entire register cache ... */
-	for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
-		u8 val = snd_soc_read(codec, reg);
-
-		if (i2c_smbus_write_byte_data(i2c_client, reg, val)) {
-			dev_err(codec->dev, "i2c write failed\n");
-			return -EIO;
-		}
-	}
+	snd_soc_cache_sync(codec);
 
 	/* ... then disable the power-down bits */
 	reg = snd_soc_read(codec, CS4270_PWRCTL);
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index 23d1bd5..69fde15 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -434,7 +434,8 @@
 {
 	int ret;
 	/* Set power-down bit */
-	ret = snd_soc_update_bits(codec, CS4271_MODE2, 0, CS4271_MODE2_PDN);
+	ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN,
+				  CS4271_MODE2_PDN);
 	if (ret < 0)
 		return ret;
 	return 0;
@@ -501,8 +502,9 @@
 		return ret;
 	}
 
-	ret = snd_soc_update_bits(codec, CS4271_MODE2, 0,
-		CS4271_MODE2_PDN | CS4271_MODE2_CPEN);
+	ret = snd_soc_update_bits(codec, CS4271_MODE2,
+				  CS4271_MODE2_PDN | CS4271_MODE2_CPEN,
+				  CS4271_MODE2_PDN | CS4271_MODE2_CPEN);
 	if (ret < 0)
 		return ret;
 	ret = snd_soc_update_bits(codec, CS4271_MODE2, CS4271_MODE2_PDN, 0);
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index 8c3c820..1ee66361 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -555,7 +555,7 @@
 
 static struct snd_soc_codec_driver soc_codec_device_cs42l51 = {
 	.probe =	cs42l51_probe,
-	.reg_cache_size = CS42L51_NUMREGS,
+	.reg_cache_size = CS42L51_NUMREGS + 1,
 	.reg_word_size = sizeof(u8),
 };
 
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
index d68ea53..bc7067d 100644
--- a/sound/soc/codecs/cx20442.c
+++ b/sound/soc/codecs/cx20442.c
@@ -15,6 +15,7 @@
 
 #include <linux/tty.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 0ebcbd5..b545b7d 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c
index f9a8773..6fae765 100644
--- a/sound/soc/codecs/dmic.c
+++ b/sound/soc/codecs/dmic.c
@@ -21,6 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c
index 9e7e964..dcf6f2a 100644
--- a/sound/soc/codecs/max9877.c
+++ b/sound/soc/codecs/max9877.c
@@ -106,13 +106,13 @@
 	unsigned int mask = mc->max;
 	unsigned int val = (ucontrol->value.integer.value[0] & mask);
 	unsigned int val2 = (ucontrol->value.integer.value[1] & mask);
-	unsigned int change = 1;
+	unsigned int change = 0;
 
-	if (((max9877_regs[reg] >> shift) & mask) == val)
-		change = 0;
+	if (((max9877_regs[reg] >> shift) & mask) != val)
+		change = 1;
 
-	if (((max9877_regs[reg2] >> shift) & mask) == val2)
-		change = 0;
+	if (((max9877_regs[reg2] >> shift) & mask) != val2)
+		change = 1;
 
 	if (change) {
 		max9877_regs[reg] &= ~(mask << shift);
diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c
index bd8f26e..f731651 100644
--- a/sound/soc/codecs/pcm3008.c
+++ b/sound/soc/codecs/pcm3008.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c
index 27a078c..4646e80 100644
--- a/sound/soc/codecs/rt5631.c
+++ b/sound/soc/codecs/rt5631.c
@@ -177,7 +177,7 @@
 static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
 /* {0, +20, +24, +30, +35, +40, +44, +50, +52}dB */
 static unsigned int mic_bst_tlv[] = {
-	TLV_DB_RANGE_HEAD(6),
+	TLV_DB_RANGE_HEAD(7),
 	0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
 	1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0),
 	2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d15695d..bbcf921 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -365,7 +365,7 @@
 
 /* tlv for mic gain, 0db 20db 30db 40db */
 static const unsigned int mic_gain_tlv[] = {
-	TLV_DB_RANGE_HEAD(4),
+	TLV_DB_RANGE_HEAD(2),
 	0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
 	1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
 };
diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c
index f681e41..887d618 100644
--- a/sound/soc/codecs/sn95031.c
+++ b/sound/soc/codecs/sn95031.c
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/intel_scu_ipc.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
index bb82408..d2f3715 100644
--- a/sound/soc/codecs/sta32x.c
+++ b/sound/soc/codecs/sta32x.c
@@ -76,6 +76,8 @@
 
 	unsigned int mclk;
 	unsigned int format;
+
+	u32 coef_shadow[STA32X_COEF_COUNT];
 };
 
 static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1);
@@ -227,6 +229,7 @@
 				  struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec);
 	int numcoef = kcontrol->private_value >> 16;
 	int index = kcontrol->private_value & 0xffff;
 	unsigned int cfud;
@@ -239,6 +242,11 @@
 	snd_soc_write(codec, STA32X_CFUD, cfud);
 
 	snd_soc_write(codec, STA32X_CFADDR2, index);
+	for (i = 0; i < numcoef && (index + i < STA32X_COEF_COUNT); i++)
+		sta32x->coef_shadow[index + i] =
+			  (ucontrol->value.bytes.data[3 * i] << 16)
+			| (ucontrol->value.bytes.data[3 * i + 1] << 8)
+			| (ucontrol->value.bytes.data[3 * i + 2]);
 	for (i = 0; i < 3 * numcoef; i++)
 		snd_soc_write(codec, STA32X_B1CF1 + i,
 			      ucontrol->value.bytes.data[i]);
@@ -252,6 +260,48 @@
 	return 0;
 }
 
+int sta32x_sync_coef_shadow(struct snd_soc_codec *codec)
+{
+	struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec);
+	unsigned int cfud;
+	int i;
+
+	/* preserve reserved bits in STA32X_CFUD */
+	cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0;
+
+	for (i = 0; i < STA32X_COEF_COUNT; i++) {
+		snd_soc_write(codec, STA32X_CFADDR2, i);
+		snd_soc_write(codec, STA32X_B1CF1,
+			      (sta32x->coef_shadow[i] >> 16) & 0xff);
+		snd_soc_write(codec, STA32X_B1CF2,
+			      (sta32x->coef_shadow[i] >> 8) & 0xff);
+		snd_soc_write(codec, STA32X_B1CF3,
+			      (sta32x->coef_shadow[i]) & 0xff);
+		/* chip documentation does not say if the bits are
+		 * self-clearing, so do it explicitly */
+		snd_soc_write(codec, STA32X_CFUD, cfud);
+		snd_soc_write(codec, STA32X_CFUD, cfud | 0x01);
+	}
+	return 0;
+}
+
+int sta32x_cache_sync(struct snd_soc_codec *codec)
+{
+	unsigned int mute;
+	int rc;
+
+	if (!codec->cache_sync)
+		return 0;
+
+	/* mute during register sync */
+	mute = snd_soc_read(codec, STA32X_MMUTE);
+	snd_soc_write(codec, STA32X_MMUTE, mute | STA32X_MMUTE_MMUTE);
+	sta32x_sync_coef_shadow(codec);
+	rc = snd_soc_cache_sync(codec);
+	snd_soc_write(codec, STA32X_MMUTE, mute);
+	return rc;
+}
+
 #define SINGLE_COEF(xname, index) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = sta32x_coefficient_info, \
@@ -661,7 +711,7 @@
 				return ret;
 			}
 
-			snd_soc_cache_sync(codec);
+			sta32x_cache_sync(codec);
 		}
 
 		/* Power up to mute */
@@ -790,6 +840,17 @@
 			    STA32X_CxCFG_OM_MASK,
 			    2 << STA32X_CxCFG_OM_SHIFT);
 
+	/* initialize coefficient shadow RAM with reset values */
+	for (i = 4; i <= 49; i += 5)
+		sta32x->coef_shadow[i] = 0x400000;
+	for (i = 50; i <= 54; i++)
+		sta32x->coef_shadow[i] = 0x7fffff;
+	sta32x->coef_shadow[55] = 0x5a9df7;
+	sta32x->coef_shadow[56] = 0x7fffff;
+	sta32x->coef_shadow[59] = 0x7fffff;
+	sta32x->coef_shadow[60] = 0x400000;
+	sta32x->coef_shadow[61] = 0x400000;
+
 	sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 	/* Bias level configuration will have done an extra enable */
 	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
diff --git a/sound/soc/codecs/sta32x.h b/sound/soc/codecs/sta32x.h
index b97ee5a..d8e32a6 100644
--- a/sound/soc/codecs/sta32x.h
+++ b/sound/soc/codecs/sta32x.h
@@ -19,6 +19,7 @@
 /* STA326 register addresses */
 
 #define STA32X_REGISTER_COUNT	0x2d
+#define STA32X_COEF_COUNT 62
 
 #define STA32X_CONFA	0x00
 #define STA32X_CONFB    0x01
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index ab27dbc..336de8f 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -430,6 +430,7 @@
 		iface_reg |= TLV320AIC23_MS_MASTER;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
+		iface_reg &= ~TLV320AIC23_MS_MASTER;
 		break;
 	default:
 		return -EINVAL;
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 7a49390..87d5ef1 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1023,6 +1023,7 @@
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
 		aic3x->master = 0;
+		iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER);
 		break;
 	default:
 		return -EINVAL;
diff --git a/sound/soc/codecs/wl1273.c b/sound/soc/codecs/wl1273.c
index 9fa1429..a854989 100644
--- a/sound/soc/codecs/wl1273.c
+++ b/sound/soc/codecs/wl1273.c
@@ -23,6 +23,7 @@
 
 #include <linux/mfd/wl1273-core.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 5d88c99..42d9039 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -2361,13 +2361,17 @@
 {
 	struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
 	struct snd_soc_codec *codec = wm5100->codec;
-	int val;
+	int val, ret;
 
 	val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT);
 
-	return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
-				   WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
-				   WM5100_GP1_LVL, val);
+	ret = snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+				  WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
+				  WM5100_GP1_LVL, val);
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
 }
 
 static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index 8d0347c..076bdb9 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -151,7 +151,7 @@
 {
 	struct snd_soc_codec *codec = dai->codec;
 	struct wm8711_priv *wm8711 =  snd_soc_codec_get_drvdata(codec);
-	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfffc;
+	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfff3;
 	int i = get_coeff(wm8711->sysclk, params_rate(params));
 	u16 srate = (coeff_div[i].sr << 2) |
 		(coeff_div[i].bosr << 1) | coeff_div[i].usb;
@@ -232,7 +232,7 @@
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u16 iface = 0;
+	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0x000c;
 
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 7e5ec03..a7c9ae1 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -453,6 +453,7 @@
 		snd_soc_write(codec, WM8731_PWR, 0xffff);
 		regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
 				       wm8731->supplies);
+		codec->cache_sync = 1;
 		break;
 	}
 	codec->dapm.bias_level = level;
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index a950471..3a629d0 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -190,6 +190,9 @@
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
 	u16 ioctl;
 
+	if (wm8753->dai_func == ucontrol->value.integer.value[0])
+		return 0;
+
 	if (codec->active)
 		return -EBUSY;
 
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 9fc8f4c..285ef87 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -867,7 +867,7 @@
 SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
 	     WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
 SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
-	     WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
+	     WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
 
 SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
 SOC_ENUM("High Pass Filter Mode", hpf_mode),
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index dc5cb31..de9ec9b 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -621,7 +621,7 @@
 
 	switch (div_id) {
 	case WM8940_BCLKDIV:
-		reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFEF3;
+		reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFE3;
 		ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
 		break;
 	case WM8940_MCLKDIV:
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index f60dfa1..53edd9a 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1961,13 +1961,19 @@
 
 static int wm8962_reset(struct snd_soc_codec *codec)
 {
-	return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+	int ret;
+
+	ret = snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+	if (ret != 0)
+		return ret;
+
+	return snd_soc_write(codec, WM8962_PLL_SOFTWARE_RESET, 0);
 }
 
 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0);
 static const DECLARE_TLV_DB_SCALE(mixin_tlv, -1500, 300, 0);
 static const unsigned int mixinpga_tlv[] = {
-	TLV_DB_RANGE_HEAD(7),
+	TLV_DB_RANGE_HEAD(5),
 	0, 1, TLV_DB_SCALE_ITEM(0, 600, 0),
 	2, 2, TLV_DB_SCALE_ITEM(1300, 1300, 0),
 	3, 4, TLV_DB_SCALE_ITEM(1800, 200, 0),
@@ -1982,7 +1988,7 @@
 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
 static const DECLARE_TLV_DB_SCALE(hp_tlv, -700, 100, 0);
 static const unsigned int classd_tlv[] = {
-	TLV_DB_RANGE_HEAD(7),
+	TLV_DB_RANGE_HEAD(2),
 	0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
 	7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
 };
@@ -2360,15 +2366,14 @@
 
 			snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
 					    WM8962_FLL_ENA, WM8962_FLL_ENA);
-			if (wm8962->irq) {
-				timeout = msecs_to_jiffies(5);
-				timeout = wait_for_completion_timeout(&wm8962->fll_lock,
-								      timeout);
 
-				if (timeout == 0)
-					dev_err(codec->dev,
-						"Timed out starting FLL\n");
-			}
+			timeout = msecs_to_jiffies(5);
+			timeout = wait_for_completion_timeout(&wm8962->fll_lock,
+							      timeout);
+
+			if (wm8962->irq && timeout == 0)
+				dev_err(codec->dev,
+					"Timed out starting FLL\n");
 		}
 		break;
 
@@ -4029,6 +4034,11 @@
 	snd_soc_update_bits(codec, WM8962_CLOCKING2,
 			    WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
 
+	/* Ensure that the oscillator and PLLs are disabled */
+	snd_soc_update_bits(codec, WM8962_PLL2,
+			    WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
+			    0);
+
 	regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
 
 	if (pdata) {
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index eec8e14..d1a142f4 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -512,7 +512,7 @@
 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 static const unsigned int drc_max_tlv[] = {
-	TLV_DB_RANGE_HEAD(4),
+	TLV_DB_RANGE_HEAD(2),
 	0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 	3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
 };
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 6b73efd..6c29885 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -56,7 +56,7 @@
 static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
-	struct wm8994 *control = wm8994->control_data;
+	struct wm8994 *control = codec->control_data;
 
 	switch (reg) {
 	case WM8994_GPIO_1:
@@ -2357,6 +2357,11 @@
 	bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
 
 	lrclk = bclk_rate / params_rate(params);
+	if (!lrclk) {
+		dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n",
+			bclk_rate);
+		return -EINVAL;
+	}
 	dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n",
 		lrclk, bclk_rate / lrclk);
 
@@ -3030,19 +3035,34 @@
 {
 	struct wm8994_priv *wm8994 = data;
 	struct snd_soc_codec *codec = wm8994->codec;
-	int reg;
+	int reg, count;
 
-	reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
-	if (reg < 0) {
-		dev_err(codec->dev, "Failed to read mic detect status: %d\n",
-			reg);
-		return IRQ_NONE;
-	}
+	/* We may occasionally read a detection without an impedence
+	 * range being provided - if that happens loop again.
+	 */
+	count = 10;
+	do {
+		reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+		if (reg < 0) {
+			dev_err(codec->dev,
+				"Failed to read mic detect status: %d\n",
+				reg);
+			return IRQ_NONE;
+		}
 
-	if (!(reg & WM8958_MICD_VALID)) {
-		dev_dbg(codec->dev, "Mic detect data not valid\n");
-		goto out;
-	}
+		if (!(reg & WM8958_MICD_VALID)) {
+			dev_dbg(codec->dev, "Mic detect data not valid\n");
+			goto out;
+		}
+
+		if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+			break;
+
+		msleep(1);
+	} while (count--);
+
+	if (count == 0)
+		dev_warn(codec->dev, "No impedence range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
 	trace_snd_soc_jack_irq(dev_name(codec->dev));
@@ -3163,6 +3183,8 @@
 		switch (wm8994->revision) {
 		case 0:
 		case 1:
+		case 2:
+		case 3:
 			wm8994->hubs.dcs_codes_l = -9;
 			wm8994->hubs.dcs_codes_r = -5;
 			break;
@@ -3180,9 +3202,9 @@
 
 	wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
 			   wm8994_fifo_error, "FIFO error", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
 			   wm8994_temp_warn, "Thermal warning", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
 			   wm8994_temp_shut, "Thermal shutdown", codec);
 
 	ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 3cd35a0..4a398c3 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -807,7 +807,6 @@
 			mdelay(100);
 
 			/* Normal bias enable & soft start off */
-			reg |= WM9081_BIAS_ENA;
 			reg &= ~WM9081_VMID_RAMP;
 			snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
 
@@ -818,7 +817,7 @@
 		}
 
 		/* VMID 2*240k */
-		reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
+		reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
 		reg &= ~WM9081_VMID_SEL_MASK;
 		reg |= 0x04;
 		snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
@@ -830,14 +829,15 @@
 		break;
 
 	case SND_SOC_BIAS_OFF:
-		/* Startup bias source */
+		/* Startup bias source and disable bias */
 		reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
 		reg |= WM9081_BIAS_SRC;
+		reg &= ~WM9081_BIAS_ENA;
 		snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
 
-		/* Disable VMID and biases with soft ramping */
+		/* Disable VMID with soft ramping */
 		reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
-		reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
+		reg &= ~WM9081_VMID_SEL_MASK;
 		reg |= WM9081_VMID_RAMP;
 		snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
 
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c
index 2b5252c..f94c060 100644
--- a/sound/soc/codecs/wm9090.c
+++ b/sound/soc/codecs/wm9090.c
@@ -177,19 +177,19 @@
 }
 
 static const unsigned int in_tlv[] = {
-	TLV_DB_RANGE_HEAD(6),
+	TLV_DB_RANGE_HEAD(3),
 	0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0),
 	1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0),
 	4, 6, TLV_DB_SCALE_ITEM(600, 600, 0),
 };
 static const unsigned int mix_tlv[] = {
-	TLV_DB_RANGE_HEAD(4),
+	TLV_DB_RANGE_HEAD(2),
 	0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0),
 	3, 3, TLV_DB_SCALE_ITEM(0, 0, 0),
 };
 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 static const unsigned int spkboost_tlv[] = {
-	TLV_DB_RANGE_HEAD(7),
+	TLV_DB_RANGE_HEAD(2),
 	0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
 	7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
 };
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 84f33d4..48e61e9 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -40,7 +40,7 @@
 static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1);
 static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0);
 static const unsigned int spkboost_tlv[] = {
-	TLV_DB_RANGE_HEAD(7),
+	TLV_DB_RANGE_HEAD(2),
 	0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
 	7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
 };
diff --git a/sound/soc/ep93xx/edb93xx.c b/sound/soc/ep93xx/edb93xx.c
index 0134d4e..51930b6 100644
--- a/sound/soc/ep93xx/edb93xx.c
+++ b/sound/soc/ep93xx/edb93xx.c
@@ -21,6 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/ep93xx/snappercl15.c b/sound/soc/ep93xx/snappercl15.c
index f74ac54..2cde433 100644
--- a/sound/soc/ep93xx/snappercl15.c
+++ b/sound/soc/ep93xx/snappercl15.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 0268cf9..83c4bd5 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -694,6 +694,7 @@
 
 	/* Initialize the the device_attribute structure */
 	dev_attr = &ssi_private->dev_attr;
+	sysfs_attr_init(&dev_attr->attr);
 	dev_attr->attr.name = "statistics";
 	dev_attr->attr.mode = S_IRUGO;
 	dev_attr->show = fsl_sysfs_ssi_show;
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 31af405..ae49f1c 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -392,7 +392,8 @@
 	}
 
 	if (strcasecmp(sprop, "i2s-slave") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
 
@@ -409,31 +410,38 @@
 		}
 		machine_data->clk_frequency = be32_to_cpup(iprop);
 	} else if (strcasecmp(sprop, "i2s-master") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
 	} else if (strcasecmp(sprop, "lj-slave") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
 	} else if (strcasecmp(sprop, "lj-master") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
 	} else if (strcasecmp(sprop, "rj-slave") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
 	} else if (strcasecmp(sprop, "rj-master") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
 	} else if (strcasecmp(sprop, "ac97-slave") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
 	} else if (strcasecmp(sprop, "ac97-master") == 0) {
-		machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+		machine_data->dai_format =
+			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS;
 		machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
 		machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
 	} else {
diff --git a/sound/soc/imx/wm1133-ev1.c b/sound/soc/imx/wm1133-ev1.c
index 75b4c72..490a126 100644
--- a/sound/soc/imx/wm1133-ev1.c
+++ b/sound/soc/imx/wm1133-ev1.c
@@ -14,6 +14,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/mid-x86/mfld_machine.c b/sound/soc/mid-x86/mfld_machine.c
index 598f48c..cca693a 100644
--- a/sound/soc/mid-x86/mfld_machine.c
+++ b/sound/soc/mid-x86/mfld_machine.c
@@ -28,6 +28,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
diff --git a/sound/soc/mid-x86/sst_platform.c b/sound/soc/mid-x86/sst_platform.c
index 7df8c58..2305702 100644
--- a/sound/soc/mid-x86/sst_platform.c
+++ b/sound/soc/mid-x86/sst_platform.c
@@ -27,6 +27,7 @@
 
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index 9c0edad..a4e3237 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -365,7 +365,8 @@
 	if (ret)
 		goto out3;
 
-	mfp_set_groupg(nuc900_audio->dev); /* enbale ac97 multifunction pin*/
+	/* enbale ac97 multifunction pin */
+	mfp_set_groupg(nuc900_audio->dev, "nuc900-audio");
 
 	return 0;
 
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
index 8da55e9..c1cd4a0 100644
--- a/sound/soc/omap/am3517evm.c
+++ b/sound/soc/omap/am3517evm.c
@@ -19,6 +19,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index dcb7b689..ccb8a6a 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/spinlock.h>
 #include <linux/tty.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/jack.h>
diff --git a/sound/soc/omap/igep0020.c b/sound/soc/omap/igep0020.c
index 84615a7..591fbf8 100644
--- a/sound/soc/omap/igep0020.c
+++ b/sound/soc/omap/igep0020.c
@@ -21,6 +21,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 7e3c20c..fc6209b 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 5e37ec9..6ede7dc 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -24,6 +24,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index 40db813..3357dcc 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -21,6 +21,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
index bf9ae2a..6857895 100644
--- a/sound/soc/omap/omap3evm.c
+++ b/sound/soc/omap/omap3evm.c
@@ -19,6 +19,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 30a75b4..7605c37 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/omap/omap4-hdmi-card.c b/sound/soc/omap/omap4-hdmi-card.c
index 9f32615..8671261 100644
--- a/sound/soc/omap/omap4-hdmi-card.c
+++ b/sound/soc/omap/omap4-hdmi-card.c
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
 #include <asm/mach-types.h>
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index db91cca..351ec9d 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -30,6 +30,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index 739efe9..c3550ae 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -21,6 +21,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index a568423..4cabb74 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 4f1969d..e8fbf8e 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -37,6 +37,7 @@
 
 /* Register descriptions for twl4030 codec part */
 #include <linux/mfd/twl4030-audio.h>
+#include <linux/module.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/sdp4430.c b/sound/soc/omap/sdp4430.c
index cc3d792a..03d9fa4 100644
--- a/sound/soc/omap/sdp4430.c
+++ b/sound/soc/omap/sdp4430.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/twl6040.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
index 7cf35c8..7641a7f 100644
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c
@@ -33,6 +33,7 @@
 
 /* Register descriptions for twl4030 codec part */
 #include <linux/mfd/twl4030-audio.h>
+#include <linux/module.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index c430600..600676f 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/soc.h>
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
index b5e922f..16521e3 100644
--- a/sound/soc/samsung/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 
@@ -271,7 +272,10 @@
 
 	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
 
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
 
 	return 0;
 }
@@ -317,7 +321,10 @@
 
 	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
 
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
 
 	return 0;
 }
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index 9465588..a68b264 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -16,6 +16,7 @@
 
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
@@ -54,7 +55,6 @@
 	spinlock_t lock;
 	int state;
 	unsigned int dma_loaded;
-	unsigned int dma_limit;
 	unsigned int dma_period;
 	dma_addr_t dma_start;
 	dma_addr_t dma_pos;
@@ -62,77 +62,79 @@
 	struct s3c_dma_params *params;
 };
 
+static void audio_buffdone(void *data);
+
 /* dma_enqueue
  *
  * place a dma buffer onto the queue for the dma system
  * to handle.
-*/
+ */
 static void dma_enqueue(struct snd_pcm_substream *substream)
 {
 	struct runtime_data *prtd = substream->runtime->private_data;
 	dma_addr_t pos = prtd->dma_pos;
 	unsigned int limit;
-	int ret;
+	struct samsung_dma_prep_info dma_info;
 
 	pr_debug("Entered %s\n", __func__);
 
-	if (s3c_dma_has_circular())
-		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-	else
-		limit = prtd->dma_limit;
+	limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
 
 	pr_debug("%s: loaded %d, limit %d\n",
 				__func__, prtd->dma_loaded, limit);
 
-	while (prtd->dma_loaded < limit) {
-		unsigned long len = prtd->dma_period;
+	dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
+	dma_info.direction =
+		(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+		? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	dma_info.fp = audio_buffdone;
+	dma_info.fp_param = substream;
+	dma_info.period = prtd->dma_period;
+	dma_info.len = prtd->dma_period*limit;
 
+	while (prtd->dma_loaded < limit) {
 		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
 
-		if ((pos + len) > prtd->dma_end) {
-			len  = prtd->dma_end - pos;
-			pr_debug("%s: corrected dma len %ld\n", __func__, len);
+		if ((pos + dma_info.period) > prtd->dma_end) {
+			dma_info.period  = prtd->dma_end - pos;
+			pr_debug("%s: corrected dma len %ld\n",
+					__func__, dma_info.period);
 		}
 
-		ret = s3c2410_dma_enqueue(prtd->params->channel,
-			substream, pos, len);
+		dma_info.buf = pos;
+		prtd->params->ops->prepare(prtd->params->ch, &dma_info);
 
-		if (ret == 0) {
-			prtd->dma_loaded++;
-			pos += prtd->dma_period;
-			if (pos >= prtd->dma_end)
-				pos = prtd->dma_start;
-		} else
-			break;
+		prtd->dma_loaded++;
+		pos += prtd->dma_period;
+		if (pos >= prtd->dma_end)
+			pos = prtd->dma_start;
 	}
 
 	prtd->dma_pos = pos;
 }
 
-static void audio_buffdone(struct s3c2410_dma_chan *channel,
-				void *dev_id, int size,
-				enum s3c2410_dma_buffresult result)
+static void audio_buffdone(void *data)
 {
-	struct snd_pcm_substream *substream = dev_id;
-	struct runtime_data *prtd;
+	struct snd_pcm_substream *substream = data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 
 	pr_debug("Entered %s\n", __func__);
 
-	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
-		return;
+	if (prtd->state & ST_RUNNING) {
+		prtd->dma_pos += prtd->dma_period;
+		if (prtd->dma_pos >= prtd->dma_end)
+			prtd->dma_pos = prtd->dma_start;
 
-	prtd = substream->runtime->private_data;
+		if (substream)
+			snd_pcm_period_elapsed(substream);
 
-	if (substream)
-		snd_pcm_period_elapsed(substream);
-
-	spin_lock(&prtd->lock);
-	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-		prtd->dma_loaded--;
-		dma_enqueue(substream);
+		spin_lock(&prtd->lock);
+		if (!samsung_dma_has_circular()) {
+			prtd->dma_loaded--;
+			dma_enqueue(substream);
+		}
+		spin_unlock(&prtd->lock);
 	}
-
-	spin_unlock(&prtd->lock);
 }
 
 static int dma_hw_params(struct snd_pcm_substream *substream,
@@ -144,8 +146,7 @@
 	unsigned long totbytes = params_buffer_bytes(params);
 	struct s3c_dma_params *dma =
 		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-	int ret = 0;
-
+	struct samsung_dma_info dma_info;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -163,30 +164,26 @@
 		pr_debug("params %p, client %p, channel %d\n", prtd->params,
 			prtd->params->client, prtd->params->channel);
 
-		ret = s3c2410_dma_request(prtd->params->channel,
-					  prtd->params->client, NULL);
+		prtd->params->ops = samsung_dma_get_ops();
 
-		if (ret < 0) {
-			printk(KERN_ERR "failed to get dma channel\n");
-			return ret;
-		}
-
-		/* use the circular buffering if we have it available. */
-		if (s3c_dma_has_circular())
-			s3c2410_dma_setflags(prtd->params->channel,
-					     S3C2410_DMAF_CIRCULAR);
+		dma_info.cap = (samsung_dma_has_circular() ?
+			DMA_CYCLIC : DMA_SLAVE);
+		dma_info.client = prtd->params->client;
+		dma_info.direction =
+			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+			? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		dma_info.width = prtd->params->dma_size;
+		dma_info.fifo = prtd->params->dma_addr;
+		prtd->params->ch = prtd->params->ops->request(
+				prtd->params->channel, &dma_info);
 	}
 
-	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    audio_buffdone);
-
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
 	runtime->dma_bytes = totbytes;
 
 	spin_lock_irq(&prtd->lock);
 	prtd->dma_loaded = 0;
-	prtd->dma_limit = runtime->hw.periods_min;
 	prtd->dma_period = params_period_bytes(params);
 	prtd->dma_start = runtime->dma_addr;
 	prtd->dma_pos = prtd->dma_start;
@@ -202,11 +199,12 @@
 
 	pr_debug("Entered %s\n", __func__);
 
-	/* TODO - do we need to ensure DMA flushed */
 	snd_pcm_set_runtime_buffer(substream, NULL);
 
 	if (prtd->params) {
-		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+		prtd->params->ops->flush(prtd->params->ch);
+		prtd->params->ops->release(prtd->params->ch,
+					prtd->params->client);
 		prtd->params = NULL;
 	}
 
@@ -225,23 +223,9 @@
 	if (!prtd->params)
 		return 0;
 
-	/* channel needs configuring for mem=>device, increment memory addr,
-	 * sync to pclk, half-word transfers to the IIS-FIFO. */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_MEM,
-				      prtd->params->dma_addr);
-	} else {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_HW,
-				      prtd->params->dma_addr);
-	}
-
-	s3c2410_dma_config(prtd->params->channel,
-			   prtd->params->dma_size);
-
 	/* flush the DMA channel */
-	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+	prtd->params->ops->flush(prtd->params->ch);
+
 	prtd->dma_loaded = 0;
 	prtd->dma_pos = prtd->dma_start;
 
@@ -265,14 +249,14 @@
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		prtd->state |= ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+		prtd->params->ops->trigger(prtd->params->ch);
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		prtd->state &= ~ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+		prtd->params->ops->stop(prtd->params->ch);
 		break;
 
 	default:
@@ -291,21 +275,12 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct runtime_data *prtd = runtime->private_data;
 	unsigned long res;
-	dma_addr_t src, dst;
 
 	pr_debug("Entered %s\n", __func__);
 
-	spin_lock(&prtd->lock);
-	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+	res = prtd->dma_pos - prtd->dma_start;
 
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		res = dst - prtd->dma_start;
-	else
-		res = src - prtd->dma_start;
-
-	spin_unlock(&prtd->lock);
-
-	pr_debug("Pointer %x %x\n", src, dst);
+	pr_debug("Pointer offset: %lu\n", res);
 
 	/* we seem to be getting the odd error from the pcm library due
 	 * to out-of-bounds pointers. this is maybe due to the dma engine
diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
index c506592..7d1ead7 100644
--- a/sound/soc/samsung/dma.h
+++ b/sound/soc/samsung/dma.h
@@ -6,7 +6,7 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  *
- *  ALSA PCM interface for the Samsung S3C24xx CPU
+ *  ALSA PCM interface for the Samsung SoC
  */
 
 #ifndef _S3C_AUDIO_H
@@ -17,6 +17,8 @@
 	int channel;				/* Channel ID */
 	dma_addr_t dma_addr;
 	int dma_size;			/* Size of the DMA transfer */
+	unsigned ch;
+	struct samsung_dma_ops *ops;
 };
 
 #endif
diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
index 4a34f60..84f9c3c 100644
--- a/sound/soc/samsung/goni_wm8994.c
+++ b/sound/soc/samsung/goni_wm8994.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/jack.h>
 
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index f75a4b6..03cfa5f 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -15,6 +15,7 @@
 
 #include <linux/types.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/jack.h>
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 0c9ac20..bff42bf 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/idma.c b/sound/soc/samsung/idma.c
index ebde074..c41178e 100644
--- a/sound/soc/samsung/idma.c
+++ b/sound/soc/samsung/idma.c
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
index f5f7c6f..1826acf 100644
--- a/sound/soc/samsung/jive_wm8750.c
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 
 #include <asm/mach-types.h>
diff --git a/sound/soc/samsung/ln2440sbc_alc650.c b/sound/soc/samsung/ln2440sbc_alc650.c
index bd91c19..cde38b8 100644
--- a/sound/soc/samsung/ln2440sbc_alc650.c
+++ b/sound/soc/samsung/ln2440sbc_alc650.c
@@ -16,6 +16,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 
 static struct snd_soc_card ln2440sbc;
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index e55d7a5..05a47cf 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
index aea7f1b..71b4c02 100644
--- a/sound/soc/samsung/rx1950_uda1380.c
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -19,6 +19,7 @@
 
 #include <linux/types.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/jack.h>
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index f26a8bf..7bbec25 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
index c08117e..558c64b 100644
--- a/sound/soc/samsung/s3c24xx-i2s.c
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -18,6 +18,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
index c8d525b..a253bcc 100644
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -9,6 +9,7 @@
 
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 
diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c
index 6bc5a36..d125e79 100644
--- a/sound/soc/samsung/s3c24xx_simtec_hermes.c
+++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 
 #include "s3c24xx_simtec.h"
diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
index 7bdda76..5e4fd46 100644
--- a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 
 #include "s3c24xx_simtec.h"
diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
index 65c1cfd..548c6ac 100644
--- a/sound/soc/samsung/s3c24xx_uda134x.c
+++ b/sound/soc/samsung/s3c24xx_uda134x.c
@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/s3c24xx_uda134x.h>
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
index 6ac6bc2..a22fc44 100644
--- a/sound/soc/samsung/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/jack.h>
diff --git a/sound/soc/samsung/smdk_spdif.c b/sound/soc/samsung/smdk_spdif.c
index e8ac961..e0fd8ad 100644
--- a/sound/soc/samsung/smdk_spdif.c
+++ b/sound/soc/samsung/smdk_spdif.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 
diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
index 8f92ffc..81b4478 100644
--- a/sound/soc/samsung/smdk_wm8580.c
+++ b/sound/soc/samsung/smdk_wm8580.c
@@ -10,6 +10,7 @@
  *  option) any later version.
  */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 
diff --git a/sound/soc/samsung/smdk_wm8580pcm.c b/sound/soc/samsung/smdk_wm8580pcm.c
index 4b9c734..0677473 100644
--- a/sound/soc/samsung/smdk_wm8580pcm.c
+++ b/sound/soc/samsung/smdk_wm8580pcm.c
@@ -8,6 +8,7 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c
index f75e439..ad9ac42 100644
--- a/sound/soc/samsung/smdk_wm8994.c
+++ b/sound/soc/samsung/smdk_wm8994.c
@@ -9,6 +9,7 @@
 
 #include "../codecs/wm8994.h"
 #include <sound/pcm_params.h>
+#include <linux/module.h>
 
  /*
   * Default CFG switch settings to use this driver:
diff --git a/sound/soc/samsung/smdk_wm8994pcm.c b/sound/soc/samsung/smdk_wm8994pcm.c
index 5f21116..da9c2a2 100644
--- a/sound/soc/samsung/smdk_wm8994pcm.c
+++ b/sound/soc/samsung/smdk_wm8994pcm.c
@@ -9,6 +9,7 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/smdk_wm9713.c b/sound/soc/samsung/smdk_wm9713.c
index fffe3c1..31c6daf 100644
--- a/sound/soc/samsung/smdk_wm9713.c
+++ b/sound/soc/samsung/smdk_wm9713.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/module.h>
 #include <sound/soc.h>
 
 static struct snd_soc_card smdk;
diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c
index 3122f31..468cff1 100644
--- a/sound/soc/samsung/spdif.c
+++ b/sound/soc/samsung/spdif.c
@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c
index b9e213f..4b8e354 100644
--- a/sound/soc/samsung/speyside.c
+++ b/sound/soc/samsung/speyside.c
@@ -13,6 +13,7 @@
 #include <sound/soc-dapm.h>
 #include <sound/jack.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include "../codecs/wm8996.h"
 #include "../codecs/wm9081.h"
@@ -190,7 +191,7 @@
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
-	snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
 	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
 
diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c
index 8a08204..e3e2716 100644
--- a/sound/soc/samsung/speyside_wm8962.c
+++ b/sound/soc/samsung/speyside_wm8962.c
@@ -13,6 +13,7 @@
 #include <sound/soc-dapm.h>
 #include <sound/jack.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include "../codecs/wm8962.h"
 
diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c
index 770a71a..dff64b9 100644
--- a/sound/soc/sh/fsi-ak4642.c
+++ b/sound/soc/sh/fsi-ak4642.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/sh_fsi.h>
 
 struct fsi_ak4642_data {
diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c
index 59553fd..f5586b5b 100644
--- a/sound/soc/sh/fsi-da7210.c
+++ b/sound/soc/sh/fsi-da7210.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/sh_fsi.h>
 
 static int fsi_da7210_init(struct snd_soc_pcm_runtime *rtd)
diff --git a/sound/soc/sh/fsi-hdmi.c b/sound/soc/sh/fsi-hdmi.c
index d3d9fd8..3ebebe7 100644
--- a/sound/soc/sh/fsi-hdmi.c
+++ b/sound/soc/sh/fsi-hdmi.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <sound/sh_fsi.h>
 
 struct fsi_hdmi_data {
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index a32fd16..3d7016e 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -16,6 +16,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/soc.h>
 #include <sound/sh_fsi.h>
 
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
index 4973c29..edacfeb 100644
--- a/sound/soc/sh/siu_dai.c
+++ b/sound/soc/sh/siu_dai.c
@@ -23,6 +23,7 @@
 #include <linux/firmware.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/clock.h>
 #include <asm/siu.h>
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 143c705..9077aa4 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -17,6 +17,7 @@
 #include <linux/lzo.h>
 #include <linux/bitmap.h>
 #include <linux/rbtree.h>
+#include <linux/export.h>
 
 #include <trace/events/asoc.h>
 
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index a5d3685..a25fa63 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -709,6 +709,12 @@
 	struct snd_soc_card *card = dev_get_drvdata(dev);
 	int i, ac97_control = 0;
 
+	/* If the initialization of this soc device failed, there is no codec
+	 * associated with it. Just bail out in this case.
+	 */
+	if (list_empty(&card->codec_dev_list))
+		return 0;
+
 	/* AC97 devices might have other drivers hanging off them so
 	 * need to resume immediately.  Other drivers don't have that
 	 * problem and may take a substantial amount of time to resume
diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
index dd89933..c8610cb 100644
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -14,6 +14,7 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/regmap.h>
+#include <linux/export.h>
 #include <sound/soc.h>
 
 #include <trace/events/asoc.h>
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 52db966..6c5ebd3 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <trace/events/asoc.h>
 
 /**
diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c
index ec921ec..0c12b98 100644
--- a/sound/soc/soc-utils.c
+++ b/sound/soc/soc-utils.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/tegra/tegra_asoc_utils.c b/sound/soc/tegra/tegra_asoc_utils.c
index dfa85cb..f8428e4 100644
--- a/sound/soc/tegra/tegra_asoc_utils.c
+++ b/sound/soc/tegra/tegra_asoc_utils.c
@@ -24,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include "tegra_asoc_utils.h"
 
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 1b839a0..4a4f1d7 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -70,6 +70,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/atomic.h>
+#include <linux/module.h>
 
 MODULE_AUTHOR("Rudolf Koenig, Brent Baccala and Martin Habets");
 MODULE_DESCRIPTION("Sun DBRI");
diff --git a/sound/synth/emux/emux.c b/sound/synth/emux/emux.c
index f16a3fc..9352207 100644
--- a/sound/synth/emux/emux.c
+++ b/sound/synth/emux/emux.c
@@ -24,6 +24,7 @@
 #include <sound/core.h>
 #include <sound/emux_synth.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include "emux_voice.h"
 
 MODULE_AUTHOR("Takashi Iwai");
diff --git a/sound/synth/emux/emux_oss.c b/sound/synth/emux/emux_oss.c
index 87e4220..319754c 100644
--- a/sound/synth/emux/emux_oss.c
+++ b/sound/synth/emux/emux_oss.c
@@ -25,6 +25,7 @@
 
 #ifdef CONFIG_SND_SEQUENCER_OSS
 
+#include <linux/export.h>
 #include <asm/uaccess.h>
 #include <sound/core.h>
 #include "emux_voice.h"
diff --git a/sound/synth/emux/emux_seq.c b/sound/synth/emux/emux_seq.c
index ca5f7ef..7778b8e 100644
--- a/sound/synth/emux/emux_seq.c
+++ b/sound/synth/emux/emux_seq.c
@@ -21,7 +21,7 @@
 
 #include "emux_voice.h"
 #include <linux/slab.h>
-
+#include <linux/module.h>
 
 /* Prototypes for static functions */
 static void free_port(void *private);
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 3e921b3..9a38de4 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/export.h>
 #include "emux_voice.h"
 #include <sound/asoundef.h>
 
diff --git a/sound/synth/emux/soundfont.c b/sound/synth/emux/soundfont.c
index 67c9123..1137b85 100644
--- a/sound/synth/emux/soundfont.c
+++ b/sound/synth/emux/soundfont.c
@@ -27,6 +27,7 @@
  */
 #include <asm/uaccess.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <sound/core.h>
 #include <sound/soundfont.h>
 #include <sound/seq_oss_legacy.h>
diff --git a/sound/synth/util_mem.c b/sound/synth/util_mem.c
index c85522e..8e34bc4 100644
--- a/sound/synth/util_mem.c
+++ b/sound/synth/util_mem.c
@@ -21,6 +21,7 @@
 #include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/util_mem.h>
 
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 07bcfe4..3b5f517 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/firmware.h>
+#include <linux/module.h>
 #include <linux/bitrev.h>
 #include <linux/kernel.h>
 
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 05c1aae..0f6dc0d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -47,6 +47,7 @@
 #include <linux/mutex.h>
 #include <linux/usb/audio.h>
 #include <linux/usb/audio-v2.h>
+#include <linux/module.h>
 
 #include <sound/control.h>
 #include <sound/core.h>
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index e21f026..c83f614 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -47,6 +47,7 @@
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/usb/audio.h>
+#include <linux/module.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
diff --git a/sound/usb/misc/ua101.c b/sound/usb/misc/ua101.c
index 67bec76..c0609c2 100644
--- a/sound/usb/misc/ua101.c
+++ b/sound/usb/misc/ua101.c
@@ -459,7 +459,8 @@
 	unsigned int i;
 
 	for (i = 0; i < stream->queue_length; ++i)
-		usb_kill_urb(&stream->urbs[i]->urb);
+		if (stream->urbs[i])
+			usb_kill_urb(&stream->urbs[i]->urb);
 }
 
 static int enable_iso_interface(struct ua101 *ua, unsigned int intf_index)
@@ -484,6 +485,9 @@
 {
 	struct usb_host_interface *alts;
 
+	if (!ua->intf[intf_index])
+		return;
+
 	alts = ua->intf[intf_index]->cur_altsetting;
 	if (alts->desc.bAlternateSetting != 0) {
 		int err = usb_set_interface(ua->dev,
@@ -1144,27 +1148,37 @@
 {
 	unsigned int i;
 
-	for (i = 0; i < stream->queue_length; ++i)
+	for (i = 0; i < stream->queue_length; ++i) {
 		kfree(stream->urbs[i]);
+		stream->urbs[i] = NULL;
+	}
 }
 
 static void free_usb_related_resources(struct ua101 *ua,
 				       struct usb_interface *interface)
 {
 	unsigned int i;
+	struct usb_interface *intf;
 
+	mutex_lock(&ua->mutex);
 	free_stream_urbs(&ua->capture);
 	free_stream_urbs(&ua->playback);
+	mutex_unlock(&ua->mutex);
 	free_stream_buffers(ua, &ua->capture);
 	free_stream_buffers(ua, &ua->playback);
 
-	for (i = 0; i < ARRAY_SIZE(ua->intf); ++i)
-		if (ua->intf[i]) {
-			usb_set_intfdata(ua->intf[i], NULL);
-			if (ua->intf[i] != interface)
+	for (i = 0; i < ARRAY_SIZE(ua->intf); ++i) {
+		mutex_lock(&ua->mutex);
+		intf = ua->intf[i];
+		ua->intf[i] = NULL;
+		mutex_unlock(&ua->mutex);
+		if (intf) {
+			usb_set_intfdata(intf, NULL);
+			if (intf != interface)
 				usb_driver_release_interface(&ua101_driver,
-							     ua->intf[i]);
+							     intf);
 		}
+	}
 }
 
 static void ua101_card_free(struct snd_card *card)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 60f65ac..ab23869 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -765,10 +765,61 @@
  * interface to ALSA control for feature/mixer units
  */
 
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+				  struct snd_kcontrol *kctl)
+{
+	switch (cval->mixer->chip->usb_id) {
+	case USB_ID(0x0471, 0x0101):
+	case USB_ID(0x0471, 0x0104):
+	case USB_ID(0x0471, 0x0105):
+	case USB_ID(0x0672, 0x1041):
+	/* quirk for UDA1321/N101.
+	 * note that detection between firmware 2.1.1.7 (N101)
+	 * and later 2.1.1.21 is not very clear from datasheets.
+	 * I hope that the min value is -15360 for newer firmware --jk
+	 */
+		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+		    cval->min == -15616) {
+			snd_printk(KERN_INFO
+				 "set volume quirk for UDA1321/N101 chip\n");
+			cval->max = -256;
+		}
+		break;
+
+	case USB_ID(0x046d, 0x09a4):
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set volume quirk for QuickCam E3500\n");
+			cval->min = 6080;
+			cval->max = 8768;
+			cval->res = 192;
+		}
+		break;
+
+	case USB_ID(0x046d, 0x0808):
+	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+	case USB_ID(0x046d, 0x0991):
+	/* Most audio usb devices lie about volume resolution.
+	 * Most Logitech webcams have res = 384.
+	 * Proboly there is some logitech magic behind this number --fishor
+	 */
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set resolution quirk: cval->res = 384\n");
+			cval->res = 384;
+		}
+		break;
+
+	}
+}
+
 /*
  * retrieve the minimum and maximum values for the specified control
  */
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+				   int default_min, struct snd_kcontrol *kctl)
 {
 	/* for failsafe */
 	cval->min = default_min;
@@ -844,6 +895,9 @@
 		cval->initialized = 1;
 	}
 
+	if (kctl)
+		volume_control_quirks(cval, kctl);
+
 	/* USB descriptions contain the dB scale in 1/256 dB unit
 	 * while ALSA TLV contains in 1/100 dB unit
 	 */
@@ -864,6 +918,7 @@
 	return 0;
 }
 
+#define get_min_max(cval, def)	get_min_max_with_quirks(cval, def, NULL)
 
 /* get a feature/mixer unit info */
 static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
@@ -882,7 +937,7 @@
 		uinfo->value.integer.max = 1;
 	} else {
 		if (!cval->initialized) {
-			get_min_max(cval, 0);
+			get_min_max_with_quirks(cval, 0, kcontrol);
 			if (cval->initialized && cval->dBmin >= cval->dBmax) {
 				kcontrol->vd[0].access &= 
 					~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1045,9 +1100,6 @@
 		cval->ch_readonly = readonly_mask;
 	}
 
-	/* get min/max values */
-	get_min_max(cval, 0);
-
 	/* if all channels in the mask are marked read-only, make the control
 	 * read-only. set_cur_mix_value() will check the mask again and won't
 	 * issue write commands to read-only channels. */
@@ -1069,6 +1121,9 @@
 		len = snd_usb_copy_string_desc(state, nameid,
 				kctl->id.name, sizeof(kctl->id.name));
 
+	/* get min/max values */
+	get_min_max_with_quirks(cval, 0, kctl);
+
 	switch (control) {
 	case UAC_FU_MUTE:
 	case UAC_FU_VOLUME:
@@ -1118,51 +1173,6 @@
 		break;
 	}
 
-	/* volume control quirks */
-	switch (state->chip->usb_id) {
-	case USB_ID(0x0471, 0x0101):
-	case USB_ID(0x0471, 0x0104):
-	case USB_ID(0x0471, 0x0105):
-	case USB_ID(0x0672, 0x1041):
-	/* quirk for UDA1321/N101.
-	 * note that detection between firmware 2.1.1.7 (N101)
-	 * and later 2.1.1.21 is not very clear from datasheets.
-	 * I hope that the min value is -15360 for newer firmware --jk
-	 */
-		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
-		    cval->min == -15616) {
-			snd_printk(KERN_INFO
-				 "set volume quirk for UDA1321/N101 chip\n");
-			cval->max = -256;
-		}
-		break;
-
-	case USB_ID(0x046d, 0x09a4):
-		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-			snd_printk(KERN_INFO
-				"set volume quirk for QuickCam E3500\n");
-			cval->min = 6080;
-			cval->max = 8768;
-			cval->res = 192;
-		}
-		break;
-
-	case USB_ID(0x046d, 0x0808):
-	case USB_ID(0x046d, 0x0809):
-	case USB_ID(0x046d, 0x0991):
-	/* Most audio usb devices lie about volume resolution.
-	 * Most Logitech webcams have res = 384.
-	 * Proboly there is some logitech magic behind this number --fishor
-	 */
-		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-			snd_printk(KERN_INFO
-				"set resolution quirk: cval->res = 384\n");
-			cval->res = 384;
-		}
-		break;
-
-	}
-
 	range = (cval->max - cval->min) / cval->res;
 	/* Are there devices with volume range more than 255? I use a bit more
 	 * to be sure. 384 is a resolution magic number found on Logitech
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index b61945f..32d2a21 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1633,6 +1633,37 @@
 	}
 },
 {
+	/* Roland GAIA SH-01 */
+	USB_DEVICE(0x0582, 0x0111),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Roland",
+		.product_name = "GAIA",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = &(const struct snd_usb_midi_endpoint_info) {
+				.out_cables = 0x0003,
+				.in_cables  = 0x0003
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+{
 	USB_DEVICE(0x0582, 0x0113),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		/* .vendor_name = "BOSS", */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 2e5bc73..a3ddac0 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -137,12 +137,12 @@
 		return -ENOMEM;
 	}
 	if (fp->nr_rates > 0) {
-		rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
+		rate_table = kmemdup(fp->rate_table,
+				     sizeof(int) * fp->nr_rates, GFP_KERNEL);
 		if (!rate_table) {
 			kfree(fp);
 			return -ENOMEM;
 		}
-		memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
 		fp->rate_table = rate_table;
 	}
 
@@ -224,10 +224,9 @@
 	if (altsd->bNumEndpoints != 1)
 		return -ENXIO;
 
-	fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+	fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
-	memcpy(fp, &ua_format, sizeof(*fp));
 
 	fp->iface = altsd->bInterfaceNumber;
 	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 084e6fc..726c1a7 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/audio.h>
+#include <linux/module.h>
 #include <sound/core.h>
 #include <sound/hwdep.h>
 #include <sound/pcm.h>
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index 5d37d1c..6ffb371 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -34,6 +34,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/moduleparam.h>
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/pcm.h>
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f82480f..6ab58cc 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -262,13 +262,16 @@
 
 static void open_counters(struct perf_evlist *evlist)
 {
-	struct perf_evsel *pos;
+	struct perf_evsel *pos, *first;
 
 	if (evlist->cpus->map[0] < 0)
 		no_inherit = true;
 
+	first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
 	list_for_each_entry(pos, &evlist->entries, node) {
 		struct perf_event_attr *attr = &pos->attr;
+		struct xyarray *group_fd = NULL;
 		/*
 		 * Check if parse_single_tracepoint_event has already asked for
 		 * PERF_SAMPLE_TIME.
@@ -283,15 +286,19 @@
 		 */
 		bool time_needed = attr->sample_type & PERF_SAMPLE_TIME;
 
+		if (group && pos != first)
+			group_fd = first->fd;
+
 		config_attr(pos, evlist);
 retry_sample_id:
 		attr->sample_id_all = sample_id_all_avail ? 1 : 0;
 try_again:
-		if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group) < 0) {
+		if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group,
+				     group_fd) < 0) {
 			int err = errno;
 
 			if (err == EPERM || err == EACCES) {
-				ui__warning_paranoid();
+				ui__error_paranoid();
 				exit(EXIT_FAILURE);
 			} else if (err ==  ENODEV && cpu_list) {
 				die("No such device - did you specify"
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 7ce65f5..7d98676 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -278,9 +278,14 @@
 struct stats			runtime_dtlb_cache_stats[MAX_NR_CPUS];
 struct stats			walltime_nsecs_stats;
 
-static int create_perf_stat_counter(struct perf_evsel *evsel)
+static int create_perf_stat_counter(struct perf_evsel *evsel,
+				    struct perf_evsel *first)
 {
 	struct perf_event_attr *attr = &evsel->attr;
+	struct xyarray *group_fd = NULL;
+
+	if (group && evsel != first)
+		group_fd = first->fd;
 
 	if (scale)
 		attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
@@ -289,14 +294,15 @@
 	attr->inherit = !no_inherit;
 
 	if (system_wide)
-		return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, group);
-
+		return perf_evsel__open_per_cpu(evsel, evsel_list->cpus,
+						group, group_fd);
 	if (target_pid == -1 && target_tid == -1) {
 		attr->disabled = 1;
 		attr->enable_on_exec = 1;
 	}
 
-	return perf_evsel__open_per_thread(evsel, evsel_list->threads, group);
+	return perf_evsel__open_per_thread(evsel, evsel_list->threads,
+					   group, group_fd);
 }
 
 /*
@@ -396,7 +402,7 @@
 static int run_perf_stat(int argc __used, const char **argv)
 {
 	unsigned long long t0, t1;
-	struct perf_evsel *counter;
+	struct perf_evsel *counter, *first;
 	int status = 0;
 	int child_ready_pipe[2], go_pipe[2];
 	const bool forks = (argc > 0);
@@ -453,8 +459,10 @@
 		close(child_ready_pipe[0]);
 	}
 
+	first = list_entry(evsel_list->entries.next, struct perf_evsel, node);
+
 	list_for_each_entry(counter, &evsel_list->entries, node) {
-		if (create_perf_stat_counter(counter) < 0) {
+		if (create_perf_stat_counter(counter, first) < 0) {
 			if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) {
 				if (verbose)
 					ui__warning("%s event is not supported by the kernel.\n",
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index efe696f..831d1ba 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -291,7 +291,7 @@
 		goto out_thread_map_delete;
 	}
 
-	if (perf_evsel__open_per_thread(evsel, threads, false) < 0) {
+	if (perf_evsel__open_per_thread(evsel, threads, false, NULL) < 0) {
 		pr_debug("failed to open counter: %s, "
 			 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 			 strerror(errno));
@@ -366,7 +366,7 @@
 		goto out_thread_map_delete;
 	}
 
-	if (perf_evsel__open(evsel, cpus, threads, false) < 0) {
+	if (perf_evsel__open(evsel, cpus, threads, false, NULL) < 0) {
 		pr_debug("failed to open counter: %s, "
 			 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 			 strerror(errno));
@@ -531,7 +531,7 @@
 
 		perf_evlist__add(evlist, evsels[i]);
 
-		if (perf_evsel__open(evsels[i], cpus, threads, false) < 0) {
+		if (perf_evsel__open(evsels[i], cpus, threads, false, NULL) < 0) {
 			pr_debug("failed to open counter: %s, "
 				 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 				 strerror(errno));
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 7a87171..c9cdedb 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -89,6 +89,7 @@
 static bool			inherit				=  false;
 static int			realtime_prio			=      0;
 static bool			group				=  false;
+static bool			sample_id_all_avail		=   true;
 static unsigned int		mmap_pages			=    128;
 
 static bool			dump_symtab                     =  false;
@@ -199,7 +200,8 @@
 	struct symbol *sym;
 
 	if (he == NULL || he->ms.sym == NULL ||
-	    (he != top.sym_filter_entry && use_browser != 1))
+	    ((top.sym_filter_entry == NULL ||
+	      top.sym_filter_entry->ms.sym != he->ms.sym) && use_browser != 1))
 		return;
 
 	sym = he->ms.sym;
@@ -289,11 +291,13 @@
 
 	printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
 
-	if (top.total_lost_warned != top.session->hists.stats.total_lost) {
-		top.total_lost_warned = top.session->hists.stats.total_lost;
-		color_fprintf(stdout, PERF_COLOR_RED, "WARNING:");
-		printf(" LOST %" PRIu64 " events, Check IO/CPU overload\n",
-		       top.total_lost_warned);
+	if (top.sym_evsel->hists.stats.nr_lost_warned !=
+	    top.sym_evsel->hists.stats.nr_events[PERF_RECORD_LOST]) {
+		top.sym_evsel->hists.stats.nr_lost_warned =
+			top.sym_evsel->hists.stats.nr_events[PERF_RECORD_LOST];
+		color_fprintf(stdout, PERF_COLOR_RED,
+			      "WARNING: LOST %d chunks, Check IO/CPU overload",
+			      top.sym_evsel->hists.stats.nr_lost_warned);
 		++printed;
 	}
 
@@ -561,7 +565,6 @@
 	hists__decay_entries_threaded(&t->sym_evsel->hists,
 				      top.hide_user_symbols,
 				      top.hide_kernel_symbols);
-	hists__output_recalc_col_len(&t->sym_evsel->hists, winsize.ws_row - 3);
 }
 
 static void *display_thread_tui(void *arg __used)
@@ -671,6 +674,7 @@
 }
 
 static void perf_event__process_sample(const union perf_event *event,
+				       struct perf_evsel *evsel,
 				       struct perf_sample *sample,
 				       struct perf_session *session)
 {
@@ -770,12 +774,8 @@
 	}
 
 	if (al.sym == NULL || !al.sym->ignore) {
-		struct perf_evsel *evsel;
 		struct hist_entry *he;
 
-		evsel = perf_evlist__id2evsel(top.evlist, sample->id);
-		assert(evsel != NULL);
-
 		if ((sort__has_parent || symbol_conf.use_callchain) &&
 		    sample->callchain) {
 			err = perf_session__resolve_callchain(session, al.thread,
@@ -807,6 +807,7 @@
 static void perf_session__mmap_read_idx(struct perf_session *self, int idx)
 {
 	struct perf_sample sample;
+	struct perf_evsel *evsel;
 	union perf_event *event;
 	int ret;
 
@@ -817,10 +818,16 @@
 			continue;
 		}
 
+		evsel = perf_evlist__id2evsel(self->evlist, sample.id);
+		assert(evsel != NULL);
+
 		if (event->header.type == PERF_RECORD_SAMPLE)
-			perf_event__process_sample(event, &sample, self);
-		else
+			perf_event__process_sample(event, evsel, &sample, self);
+		else if (event->header.type < PERF_RECORD_MAX) {
+			hists__inc_nr_events(&evsel->hists, event->header.type);
 			perf_event__process(event, &sample, self);
+		} else
+			++self->hists.stats.nr_unknown_events;
 	}
 }
 
@@ -834,10 +841,16 @@
 
 static void start_counters(struct perf_evlist *evlist)
 {
-	struct perf_evsel *counter;
+	struct perf_evsel *counter, *first;
+
+	first = list_entry(evlist->entries.next, struct perf_evsel, node);
 
 	list_for_each_entry(counter, &evlist->entries, node) {
 		struct perf_event_attr *attr = &counter->attr;
+		struct xyarray *group_fd = NULL;
+
+		if (group && counter != first)
+			group_fd = first->fd;
 
 		attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 
@@ -858,14 +871,23 @@
 		attr->mmap = 1;
 		attr->comm = 1;
 		attr->inherit = inherit;
+retry_sample_id:
+		attr->sample_id_all = sample_id_all_avail ? 1 : 0;
 try_again:
 		if (perf_evsel__open(counter, top.evlist->cpus,
-				     top.evlist->threads, group) < 0) {
+				     top.evlist->threads, group,
+				     group_fd) < 0) {
 			int err = errno;
 
 			if (err == EPERM || err == EACCES) {
-				ui__warning_paranoid();
+				ui__error_paranoid();
 				goto out_err;
+			} else if (err == EINVAL && sample_id_all_avail) {
+				/*
+				 * Old kernel, no attr->sample_id_type_all field
+				 */
+				sample_id_all_avail = false;
+				goto retry_sample_id;
 			}
 			/*
 			 * If it's cycles then fall back to hrtimer
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index bc8f477..119e996 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -310,9 +310,12 @@
 		}
 		err = -ENOENT;
 		dso->annotate_warned = 1;
-		pr_err("Can't annotate %s: No vmlinux file%s was found in the "
-		       "path.\nPlease use 'perf buildid-cache -av vmlinux' or "
-		       "--vmlinux vmlinux.\n",
+		pr_err("Can't annotate %s:\n\n"
+		       "No vmlinux file%s\nwas found in the path.\n\n"
+		       "Please use:\n\n"
+		       "  perf buildid-cache -av vmlinux\n\n"
+		       "or:\n\n"
+		       "  --vmlinux vmlinux",
 		       sym->name, build_id_msg ?: "");
 		goto out_free_filename;
 	}
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index 155749d..26817da 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -47,19 +47,20 @@
 }
 
 #ifdef NO_NEWT_SUPPORT
-void ui__warning(const char *format, ...)
+int ui__warning(const char *format, ...)
 {
 	va_list args;
 
 	va_start(args, format);
 	vfprintf(stderr, format, args);
 	va_end(args);
+	return 0;
 }
 #endif
 
-void ui__warning_paranoid(void)
+int ui__error_paranoid(void)
 {
-	ui__warning("Permission error - are you root?\n"
+	return ui__error("Permission error - are you root?\n"
 		    "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
 		    " -1 - Not paranoid at all\n"
 		    "  0 - Disallow raw tracepoint access for unpriv\n"
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index fd53db4..f2ce88d 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -19,23 +19,18 @@
 	return 0;
 }
 
-static inline struct ui_progress *ui_progress__new(const char *title __used,
-						   u64 total __used)
-{
-	return (struct ui_progress *)1;
-}
+static inline void ui_progress__update(u64 curr __used, u64 total __used,
+				       const char *title __used) {}
 
-static inline void ui_progress__update(struct ui_progress *self __used,
-				       u64 curr __used) {}
-
-static inline void ui_progress__delete(struct ui_progress *self __used) {}
+#define ui__error(format, arg...) ui__warning(format, ##arg)
 #else
 extern char ui_helpline__last_msg[];
 int ui_helpline__show_help(const char *format, va_list ap);
 #include "ui/progress.h"
+int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
 #endif
 
-void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
-void ui__warning_paranoid(void);
+int ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+int ui__error_paranoid(void);
 
 #endif	/* __PERF_DEBUG_H */
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 2f6bc89..fbb4b4a 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -539,3 +539,33 @@
 {
 	evlist->selected = evsel;
 }
+
+int perf_evlist__open(struct perf_evlist *evlist, bool group)
+{
+	struct perf_evsel *evsel, *first;
+	int err, ncpus, nthreads;
+
+	first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+	list_for_each_entry(evsel, &evlist->entries, node) {
+		struct xyarray *group_fd = NULL;
+
+		if (group && evsel != first)
+			group_fd = first->fd;
+
+		err = perf_evsel__open(evsel, evlist->cpus, evlist->threads,
+				       group, group_fd);
+		if (err < 0)
+			goto out_err;
+	}
+
+	return 0;
+out_err:
+	ncpus = evlist->cpus ? evlist->cpus->nr : 1;
+	nthreads = evlist->threads ? evlist->threads->nr : 1;
+
+	list_for_each_entry_reverse(evsel, &evlist->entries, node)
+		perf_evsel__close(evsel, ncpus, nthreads);
+
+	return err;
+}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 6be71fc..1779ffe 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -50,6 +50,8 @@
 
 union perf_event *perf_evlist__mmap_read(struct perf_evlist *self, int idx);
 
+int perf_evlist__open(struct perf_evlist *evlist, bool group);
+
 int perf_evlist__alloc_mmap(struct perf_evlist *evlist);
 int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite);
 void perf_evlist__munmap(struct perf_evlist *evlist);
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index b46f6e4..e426264 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -16,6 +16,7 @@
 #include "thread_map.h"
 
 #define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+#define GROUP_FD(group_fd, cpu) (*(int *)xyarray__entry(group_fd, cpu, 0))
 
 int __perf_evsel__sample_size(u64 sample_type)
 {
@@ -204,15 +205,16 @@
 }
 
 static int __perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-			      struct thread_map *threads, bool group)
+			      struct thread_map *threads, bool group,
+			      struct xyarray *group_fds)
 {
 	int cpu, thread;
 	unsigned long flags = 0;
-	int pid = -1;
+	int pid = -1, err;
 
 	if (evsel->fd == NULL &&
 	    perf_evsel__alloc_fd(evsel, cpus->nr, threads->nr) < 0)
-		return -1;
+		return -ENOMEM;
 
 	if (evsel->cgrp) {
 		flags = PERF_FLAG_PID_CGROUP;
@@ -220,7 +222,7 @@
 	}
 
 	for (cpu = 0; cpu < cpus->nr; cpu++) {
-		int group_fd = -1;
+		int group_fd = group_fds ? GROUP_FD(group_fds, cpu) : -1;
 
 		for (thread = 0; thread < threads->nr; thread++) {
 
@@ -231,8 +233,10 @@
 								     pid,
 								     cpus->map[cpu],
 								     group_fd, flags);
-			if (FD(evsel, cpu, thread) < 0)
+			if (FD(evsel, cpu, thread) < 0) {
+				err = -errno;
 				goto out_close;
+			}
 
 			if (group && group_fd == -1)
 				group_fd = FD(evsel, cpu, thread);
@@ -249,7 +253,17 @@
 		}
 		thread = threads->nr;
 	} while (--cpu >= 0);
-	return -1;
+	return err;
+}
+
+void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
+{
+	if (evsel->fd == NULL)
+		return;
+
+	perf_evsel__close_fd(evsel, ncpus, nthreads);
+	perf_evsel__free_fd(evsel);
+	evsel->fd = NULL;
 }
 
 static struct {
@@ -269,7 +283,8 @@
 };
 
 int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-		     struct thread_map *threads, bool group)
+		     struct thread_map *threads, bool group,
+		     struct xyarray *group_fd)
 {
 	if (cpus == NULL) {
 		/* Work around old compiler warnings about strict aliasing */
@@ -279,19 +294,23 @@
 	if (threads == NULL)
 		threads = &empty_thread_map.map;
 
-	return __perf_evsel__open(evsel, cpus, threads, group);
+	return __perf_evsel__open(evsel, cpus, threads, group, group_fd);
 }
 
 int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
-			     struct cpu_map *cpus, bool group)
+			     struct cpu_map *cpus, bool group,
+			     struct xyarray *group_fd)
 {
-	return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group);
+	return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group,
+				  group_fd);
 }
 
 int perf_evsel__open_per_thread(struct perf_evsel *evsel,
-				struct thread_map *threads, bool group)
+				struct thread_map *threads, bool group,
+				struct xyarray *group_fd)
 {
-	return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group);
+	return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group,
+				  group_fd);
 }
 
 static int perf_event__parse_id_sample(const union perf_event *event, u64 type,
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index e9a3155..b1d15e6 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -82,11 +82,15 @@
 void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
 
 int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
-			     struct cpu_map *cpus, bool group);
+			     struct cpu_map *cpus, bool group,
+			     struct xyarray *group_fds);
 int perf_evsel__open_per_thread(struct perf_evsel *evsel,
-				struct thread_map *threads, bool group);
+				struct thread_map *threads, bool group,
+				struct xyarray *group_fds);
 int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-		     struct thread_map *threads, bool group);
+		     struct thread_map *threads, bool group,
+		     struct xyarray *group_fds);
+void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads);
 
 #define perf_evsel__match(evsel, t, c)		\
 	(evsel->attr.type == PERF_TYPE_##t &&	\
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 76c0b2c..bcd05d0 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1,5 +1,6 @@
 #define _FILE_OFFSET_BITS 64
 
+#include "util.h"
 #include <sys/types.h>
 #include <byteswap.h>
 #include <unistd.h>
@@ -11,7 +12,6 @@
 
 #include "evlist.h"
 #include "evsel.h"
-#include "util.h"
 #include "header.h"
 #include "../perf.h"
 #include "trace-event.h"
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index f6a9939..a36a3fa 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -365,7 +365,6 @@
 
 	root = hists__get_rotate_entries_in(hists);
 	next = rb_first(root);
-	hists->stats.total_period = 0;
 
 	while (next) {
 		n = rb_entry(next, struct hist_entry, rb_node_in);
@@ -379,7 +378,6 @@
 			 * been set by, say, the hist_browser.
 			 */
 			hists__apply_filters(hists, n);
-			hists__inc_nr_entries(hists, n);
 		}
 	}
 }
@@ -442,6 +440,7 @@
 	hists->entries = RB_ROOT;
 
 	hists->nr_entries = 0;
+	hists->stats.total_period = 0;
 	hists__reset_col_len(hists);
 
 	while (next) {
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index ff93ddc..c86c1d2 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -28,6 +28,7 @@
 	u64 total_lost;
 	u64 total_invalid_chains;
 	u32 nr_events[PERF_RECORD_HEADER_MAX];
+	u32 nr_lost_warned;
 	u32 nr_unknown_events;
 	u32 nr_invalid_chains;
 	u32 nr_unknown_id;
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index 7624324..9dd47a4 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -623,7 +623,11 @@
 		cpus = ((struct pyrf_cpu_map *)pcpus)->cpus;
 
 	evsel->attr.inherit = inherit;
-	if (perf_evsel__open(evsel, cpus, threads, group) < 0) {
+	/*
+	 * This will group just the fds for this single evsel, to group
+	 * multiple events, use evlist.open().
+	 */
+	if (perf_evsel__open(evsel, cpus, threads, group, NULL) < 0) {
 		PyErr_SetFromErrno(PyExc_OSError);
 		return NULL;
 	}
@@ -814,6 +818,25 @@
 	return Py_None;
 }
 
+static PyObject *pyrf_evlist__open(struct pyrf_evlist *pevlist,
+				   PyObject *args, PyObject *kwargs)
+{
+	struct perf_evlist *evlist = &pevlist->evlist;
+	int group = 0;
+	static char *kwlist[] = { "group", NULL };
+
+	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist, &group))
+		return NULL;
+
+	if (perf_evlist__open(evlist, group) < 0) {
+		PyErr_SetFromErrno(PyExc_OSError);
+		return NULL;
+	}
+
+	Py_INCREF(Py_None);
+	return Py_None;
+}
+
 static PyMethodDef pyrf_evlist__methods[] = {
 	{
 		.ml_name  = "mmap",
@@ -822,6 +845,12 @@
 		.ml_doc	  = PyDoc_STR("mmap the file descriptor table.")
 	},
 	{
+		.ml_name  = "open",
+		.ml_meth  = (PyCFunction)pyrf_evlist__open,
+		.ml_flags = METH_VARARGS | METH_KEYWORDS,
+		.ml_doc	  = PyDoc_STR("open the file descriptors.")
+	},
+	{
 		.ml_name  = "poll",
 		.ml_meth  = (PyCFunction)pyrf_evlist__poll,
 		.ml_flags = METH_VARARGS | METH_KEYWORDS,
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 20e011c..85c1e6b7 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -502,6 +502,7 @@
 	struct perf_sample sample;
 	u64 limit = os->next_flush;
 	u64 last_ts = os->last_sample ? os->last_sample->timestamp : 0ULL;
+	unsigned idx = 0, progress_next = os->nr_samples / 16;
 	int ret;
 
 	if (!ops->ordered_samples || !limit)
@@ -521,6 +522,11 @@
 		os->last_flush = iter->timestamp;
 		list_del(&iter->list);
 		list_add(&iter->list, &os->sample_cache);
+		if (++idx >= progress_next) {
+			progress_next += os->nr_samples / 16;
+			ui_progress__update(idx, os->nr_samples,
+					    "Processing time ordered events...");
+		}
 	}
 
 	if (list_empty(head)) {
@@ -529,6 +535,8 @@
 		os->last_sample =
 			list_entry(head->prev, struct sample_queue, list);
 	}
+
+	os->nr_samples = 0;
 }
 
 /*
@@ -588,6 +596,7 @@
 	u64 timestamp = new->timestamp;
 	struct list_head *p;
 
+	++os->nr_samples;
 	os->last_sample = new;
 
 	if (!sample) {
@@ -738,10 +747,27 @@
 
 	dump_event(session, event, file_offset, sample);
 
+	evsel = perf_evlist__id2evsel(session->evlist, sample->id);
+	if (evsel != NULL && event->header.type != PERF_RECORD_SAMPLE) {
+		/*
+		 * XXX We're leaving PERF_RECORD_SAMPLE unnacounted here
+		 * because the tools right now may apply filters, discarding
+		 * some of the samples. For consistency, in the future we
+		 * should have something like nr_filtered_samples and remove
+		 * the sample->period from total_sample_period, etc, KISS for
+		 * now tho.
+		 *
+		 * Also testing against NULL allows us to handle files without
+		 * attr.sample_id_all and/or without PERF_SAMPLE_ID. In the
+		 * future probably it'll be a good idea to restrict event
+		 * processing via perf_session to files with both set.
+		 */
+		hists__inc_nr_events(&evsel->hists, event->header.type);
+	}
+
 	switch (event->header.type) {
 	case PERF_RECORD_SAMPLE:
 		dump_sample(session, event, sample);
-		evsel = perf_evlist__id2evsel(session->evlist, sample->id);
 		if (evsel == NULL) {
 			++session->hists.stats.nr_unknown_id;
 			return -1;
@@ -874,11 +900,11 @@
 					    const struct perf_event_ops *ops)
 {
 	if (ops->lost == perf_event__process_lost &&
-	    session->hists.stats.total_lost != 0) {
-		ui__warning("Processed %" PRIu64 " events and LOST %" PRIu64
-			    "!\n\nCheck IO/CPU overload!\n\n",
-			    session->hists.stats.total_period,
-			    session->hists.stats.total_lost);
+	    session->hists.stats.nr_events[PERF_RECORD_LOST] != 0) {
+		ui__warning("Processed %d events and lost %d chunks!\n\n"
+			    "Check IO/CPU overload!\n\n",
+			    session->hists.stats.nr_events[0],
+			    session->hists.stats.nr_events[PERF_RECORD_LOST]);
 	}
 
 	if (session->hists.stats.nr_unknown_events != 0) {
@@ -1012,7 +1038,6 @@
 {
 	u64 head, page_offset, file_offset, file_pos, progress_next;
 	int err, mmap_prot, mmap_flags, map_idx = 0;
-	struct ui_progress *progress;
 	size_t	page_size, mmap_size;
 	char *buf, *mmaps[8];
 	union perf_event *event;
@@ -1030,9 +1055,6 @@
 		file_size = data_offset + data_size;
 
 	progress_next = file_size / 16;
-	progress = ui_progress__new("Processing events...", file_size);
-	if (progress == NULL)
-		return -1;
 
 	mmap_size = session->mmap_window;
 	if (mmap_size > file_size)
@@ -1095,7 +1117,8 @@
 
 	if (file_pos >= progress_next) {
 		progress_next += file_size / 16;
-		ui_progress__update(progress, file_pos);
+		ui_progress__update(file_pos, file_size,
+				    "Processing events...");
 	}
 
 	if (file_pos < file_size)
@@ -1106,7 +1129,6 @@
 	session->ordered_samples.next_flush = ULLONG_MAX;
 	flush_sample_queue(session, ops);
 out_err:
-	ui_progress__delete(progress);
 	perf_session__warn_about_errors(session, ops);
 	perf_session_free_sample_buffers(session);
 	return err;
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 514b06d..6e393c9 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -23,6 +23,7 @@
 	struct sample_queue	*sample_buffer;
 	struct sample_queue	*last_sample;
 	int			sample_buffer_idx;
+	unsigned int		nr_samples;
 };
 
 struct perf_session {
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index 01d1057..3996509 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -19,7 +19,6 @@
 	u64		   kernel_samples, us_samples;
 	u64		   exact_samples;
 	u64		   guest_us_samples, guest_kernel_samples;
-	u64		   total_lost_warned;
 	int		   print_entries, count_filter, delay_secs;
 	int		   freq;
 	pid_t		   target_pid, target_tid;
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index 2d530cf..d2655f0 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -80,7 +80,7 @@
 	int ret = errno;
 
 	if (errno)
-		perror("trace-cmd");
+		perror("perf");
 	else
 		ret = -1;
 
diff --git a/tools/perf/util/ui/browser.c b/tools/perf/util/ui/browser.c
index 5359f37..5568291 100644
--- a/tools/perf/util/ui/browser.c
+++ b/tools/perf/util/ui/browser.c
@@ -4,6 +4,7 @@
 #include "libslang.h"
 #include <newt.h>
 #include "ui.h"
+#include "util.h"
 #include <linux/compiler.h>
 #include <linux/list.h>
 #include <linux/rbtree.h>
@@ -168,6 +169,59 @@
 	self->x = 0;
 }
 
+void ui_browser__handle_resize(struct ui_browser *browser)
+{
+	ui__refresh_dimensions(false);
+	ui_browser__show(browser, browser->title, ui_helpline__current);
+	ui_browser__refresh(browser);
+}
+
+int ui_browser__warning(struct ui_browser *browser, int timeout,
+			const char *format, ...)
+{
+	va_list args;
+	char *text;
+	int key = 0, err;
+
+	va_start(args, format);
+	err = vasprintf(&text, format, args);
+	va_end(args);
+
+	if (err < 0) {
+		va_start(args, format);
+		ui_helpline__vpush(format, args);
+		va_end(args);
+	} else {
+		while ((key == ui__question_window("Warning!", text,
+						   "Press any key...",
+						   timeout)) == K_RESIZE)
+			ui_browser__handle_resize(browser);
+		free(text);
+	}
+
+	return key;
+}
+
+int ui_browser__help_window(struct ui_browser *browser, const char *text)
+{
+	int key;
+
+	while ((key = ui__help_window(text)) == K_RESIZE)
+		ui_browser__handle_resize(browser);
+
+	return key;
+}
+
+bool ui_browser__dialog_yesno(struct ui_browser *browser, const char *text)
+{
+	int key;
+
+	while ((key = ui__dialog_yesno(text)) == K_RESIZE)
+		ui_browser__handle_resize(browser);
+
+	return key == K_ENTER || toupper(key) == 'Y';
+}
+
 void ui_browser__reset_index(struct ui_browser *self)
 {
 	self->index = self->top_idx = 0;
@@ -230,13 +284,15 @@
 		       (browser->nr_entries - 1));
 	}
 
+	SLsmg_set_char_set(1);
+
 	while (h < height) {
 	        ui_browser__gotorc(browser, row++, col);
-		SLsmg_set_char_set(1);
-		SLsmg_write_char(h == pct ? SLSMG_DIAMOND_CHAR : SLSMG_BOARD_CHAR);
-		SLsmg_set_char_set(0);
+		SLsmg_write_char(h == pct ? SLSMG_DIAMOND_CHAR : SLSMG_CKBRD_CHAR);
 		++h;
 	}
+
+	SLsmg_set_char_set(0);
 }
 
 static int __ui_browser__refresh(struct ui_browser *browser)
@@ -291,53 +347,10 @@
 	browser->seek(browser, browser->top_idx, SEEK_SET);
 }
 
-static int ui__getch(int delay_secs)
-{
-	struct timeval timeout, *ptimeout = delay_secs ? &timeout : NULL;
-	fd_set read_set;
-	int err, key;
-
-	FD_ZERO(&read_set);
-	FD_SET(0, &read_set);
-
-	if (delay_secs) {
-		timeout.tv_sec = delay_secs;
-		timeout.tv_usec = 0;
-	}
-
-        err = select(1, &read_set, NULL, NULL, ptimeout);
-
-	if (err == 0)
-		return K_TIMER;
-
-	if (err == -1) {
-		if (errno == EINTR)
-			return K_RESIZE;
-		return K_ERROR;
-	}
-
-	key = SLang_getkey();
-	if (key != K_ESC)
-		return key;
-
-	FD_ZERO(&read_set);
-	FD_SET(0, &read_set);
-	timeout.tv_sec = 0;
-	timeout.tv_usec = 20;
-        err = select(1, &read_set, NULL, NULL, &timeout);
-	if (err == 0)
-		return K_ESC;
-
-	SLang_ungetkey(key);
-	return SLkp_getkey();
-}
-
 int ui_browser__run(struct ui_browser *self, int delay_secs)
 {
 	int err, key;
 
-	pthread__unblock_sigwinch();
-
 	while (1) {
 		off_t offset;
 
@@ -351,10 +364,7 @@
 		key = ui__getch(delay_secs);
 
 		if (key == K_RESIZE) {
-			pthread_mutex_lock(&ui__lock);
-			SLtt_get_screen_size();
-			SLsmg_reinit_smg();
-			pthread_mutex_unlock(&ui__lock);
+			ui__refresh_dimensions(false);
 			ui_browser__refresh_dimensions(self);
 			__ui_browser__show_title(self, self->title);
 			ui_helpline__puts(self->helpline);
@@ -533,6 +543,47 @@
 	return -1;
 }
 
+void ui_browser__argv_seek(struct ui_browser *browser, off_t offset, int whence)
+{
+	switch (whence) {
+	case SEEK_SET:
+		browser->top = browser->entries;
+		break;
+	case SEEK_CUR:
+		browser->top = browser->top + browser->top_idx + offset;
+		break;
+	case SEEK_END:
+		browser->top = browser->top + browser->nr_entries + offset;
+		break;
+	default:
+		return;
+	}
+}
+
+unsigned int ui_browser__argv_refresh(struct ui_browser *browser)
+{
+	unsigned int row = 0, idx = browser->top_idx;
+	char **pos;
+
+	if (browser->top == NULL)
+		browser->top = browser->entries;
+
+	pos = (char **)browser->top;
+	while (idx < browser->nr_entries) {
+		if (!browser->filter || !browser->filter(browser, *pos)) {
+			ui_browser__gotorc(browser, row, 0);
+			browser->write(browser, pos, row);
+			if (++row == browser->height)
+				break;
+		}
+
+		++idx;
+		++pos;
+	}
+
+	return row;
+}
+
 void ui_browser__init(void)
 {
 	int i = 0;
diff --git a/tools/perf/util/ui/browser.h b/tools/perf/util/ui/browser.h
index a2c707d..84d761b 100644
--- a/tools/perf/util/ui/browser.h
+++ b/tools/perf/util/ui/browser.h
@@ -43,6 +43,15 @@
 int ui_browser__refresh(struct ui_browser *self);
 int ui_browser__run(struct ui_browser *browser, int delay_secs);
 void ui_browser__update_nr_entries(struct ui_browser *browser, u32 nr_entries);
+void ui_browser__handle_resize(struct ui_browser *browser);
+
+int ui_browser__warning(struct ui_browser *browser, int timeout,
+			const char *format, ...);
+int ui_browser__help_window(struct ui_browser *browser, const char *text);
+bool ui_browser__dialog_yesno(struct ui_browser *browser, const char *text);
+
+void ui_browser__argv_seek(struct ui_browser *browser, off_t offset, int whence);
+unsigned int ui_browser__argv_refresh(struct ui_browser *browser);
 
 void ui_browser__rb_tree_seek(struct ui_browser *self, off_t offset, int whence);
 unsigned int ui_browser__rb_tree_refresh(struct ui_browser *self);
diff --git a/tools/perf/util/ui/browsers/annotate.c b/tools/perf/util/ui/browsers/annotate.c
index 4e0cb7fe..0575905 100644
--- a/tools/perf/util/ui/browsers/annotate.c
+++ b/tools/perf/util/ui/browsers/annotate.c
@@ -1,6 +1,9 @@
+#include "../../util.h"
 #include "../browser.h"
 #include "../helpline.h"
 #include "../libslang.h"
+#include "../ui.h"
+#include "../util.h"
 #include "../../annotate.h"
 #include "../../hist.h"
 #include "../../sort.h"
@@ -8,15 +11,6 @@
 #include <pthread.h>
 #include <newt.h>
 
-static void ui__error_window(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	newtWinMessagev((char *)"Error", (char *)"Ok", (char *)fmt, ap);
-	va_end(ap);
-}
-
 struct annotate_browser {
 	struct ui_browser b;
 	struct rb_root	  entries;
@@ -400,7 +394,7 @@
 		return -1;
 
 	if (symbol__annotate(sym, map, sizeof(struct objdump_line_rb_node)) < 0) {
-		ui__error_window(ui_helpline__last_msg);
+		ui__error("%s", ui_helpline__last_msg);
 		return -1;
 	}
 
diff --git a/tools/perf/util/ui/browsers/hists.c b/tools/perf/util/ui/browsers/hists.c
index 4663dcb..d0c94b4 100644
--- a/tools/perf/util/ui/browsers/hists.c
+++ b/tools/perf/util/ui/browsers/hists.c
@@ -17,6 +17,7 @@
 #include "../browser.h"
 #include "../helpline.h"
 #include "../util.h"
+#include "../ui.h"
 #include "map.h"
 
 struct hist_browser {
@@ -294,6 +295,15 @@
 	ui_browser__reset_index(&self->b);
 }
 
+static void ui_browser__warn_lost_events(struct ui_browser *browser)
+{
+	ui_browser__warning(browser, 4,
+		"Events are being lost, check IO/CPU overload!\n\n"
+		"You may want to run 'perf' using a RT scheduler policy:\n\n"
+		" perf top -r 80\n\n"
+		"Or reduce the sampling frequency.");
+}
+
 static int hist_browser__run(struct hist_browser *self, const char *ev_name,
 			     void(*timer)(void *arg), void *arg, int delay_secs)
 {
@@ -314,12 +324,18 @@
 		key = ui_browser__run(&self->b, delay_secs);
 
 		switch (key) {
-		case -1:
-			/* FIXME we need to check if it was es.reason == NEWT_EXIT_TIMER */
+		case K_TIMER:
 			timer(arg);
 			ui_browser__update_nr_entries(&self->b, self->hists->nr_entries);
-			hists__browser_title(self->hists, title, sizeof(title),
-					     ev_name);
+
+			if (self->hists->stats.nr_lost_warned !=
+			    self->hists->stats.nr_events[PERF_RECORD_LOST]) {
+				self->hists->stats.nr_lost_warned =
+					self->hists->stats.nr_events[PERF_RECORD_LOST];
+				ui_browser__warn_lost_events(&self->b);
+			}
+
+			hists__browser_title(self->hists, title, sizeof(title), ev_name);
 			ui_browser__show_title(&self->b, title);
 			continue;
 		case 'D': { /* Debug */
@@ -883,7 +899,7 @@
 			goto out_free_stack;
 		case 'a':
 			if (!browser->has_symbols) {
-				ui__warning(
+				ui_browser__warning(&browser->b, delay_secs * 2,
 			"Annotation is only available for symbolic views, "
 			"include \"sym\" in --sort to use it.");
 				continue;
@@ -901,7 +917,8 @@
 		case K_F1:
 		case 'h':
 		case '?':
-			ui__help_window("h/?/F1        Show this window\n"
+			ui_browser__help_window(&browser->b,
+					"h/?/F1        Show this window\n"
 					"UP/DOWN/PGUP\n"
 					"PGDN/SPACE    Navigate\n"
 					"q/ESC/CTRL+C  Exit browser\n\n"
@@ -914,7 +931,7 @@
 					"C             Collapse all callchains\n"
 					"E             Expand all callchains\n"
 					"d             Zoom into current DSO\n"
-					"t             Zoom into current Thread\n");
+					"t             Zoom into current Thread");
 			continue;
 		case K_ENTER:
 		case K_RIGHT:
@@ -940,7 +957,8 @@
 		}
 		case K_ESC:
 			if (!left_exits &&
-			    !ui__dialog_yesno("Do you really want to exit?"))
+			    !ui_browser__dialog_yesno(&browser->b,
+					       "Do you really want to exit?"))
 				continue;
 			/* Fall thru */
 		case 'q':
@@ -993,6 +1011,7 @@
 
 		if (choice == annotate) {
 			struct hist_entry *he;
+			int err;
 do_annotate:
 			he = hist_browser__selected_entry(browser);
 			if (he == NULL)
@@ -1001,10 +1020,12 @@
 			 * Don't let this be freed, say, by hists__decay_entry.
 			 */
 			he->used = true;
-			hist_entry__tui_annotate(he, evsel->idx, nr_events,
-						 timer, arg, delay_secs);
+			err = hist_entry__tui_annotate(he, evsel->idx, nr_events,
+						       timer, arg, delay_secs);
 			he->used = false;
 			ui_browser__update_nr_entries(&browser->b, browser->hists->nr_entries);
+			if (err)
+				ui_browser__handle_resize(&browser->b);
 		} else if (choice == browse_map)
 			map__browse(browser->selection->map);
 		else if (choice == zoom_dso) {
@@ -1056,6 +1077,7 @@
 struct perf_evsel_menu {
 	struct ui_browser b;
 	struct perf_evsel *selection;
+	bool lost_events, lost_events_warned;
 };
 
 static void perf_evsel_menu__write(struct ui_browser *browser,
@@ -1068,14 +1090,29 @@
 	unsigned long nr_events = evsel->hists.stats.nr_events[PERF_RECORD_SAMPLE];
 	const char *ev_name = event_name(evsel);
 	char bf[256], unit;
+	const char *warn = " ";
+	size_t printed;
 
 	ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
 						       HE_COLORSET_NORMAL);
 
 	nr_events = convert_unit(nr_events, &unit);
-	snprintf(bf, sizeof(bf), "%lu%c%s%s", nr_events,
-		 unit, unit == ' ' ? "" : " ", ev_name);
-	slsmg_write_nstring(bf, browser->width);
+	printed = snprintf(bf, sizeof(bf), "%lu%c%s%s", nr_events,
+			   unit, unit == ' ' ? "" : " ", ev_name);
+	slsmg_printf("%s", bf);
+
+	nr_events = evsel->hists.stats.nr_events[PERF_RECORD_LOST];
+	if (nr_events != 0) {
+		menu->lost_events = true;
+		if (!current_entry)
+			ui_browser__set_color(browser, HE_COLORSET_TOP);
+		nr_events = convert_unit(nr_events, &unit);
+		snprintf(bf, sizeof(bf), ": %ld%c%schunks LOST!", nr_events,
+			 unit, unit == ' ' ? "" : " ");
+		warn = bf;
+	}
+
+	slsmg_write_nstring(warn, browser->width - printed);
 
 	if (current_entry)
 		menu->selection = evsel;
@@ -1100,6 +1137,11 @@
 		switch (key) {
 		case K_TIMER:
 			timer(arg);
+
+			if (!menu->lost_events_warned && menu->lost_events) {
+				ui_browser__warn_lost_events(&menu->b);
+				menu->lost_events_warned = true;
+			}
 			continue;
 		case K_RIGHT:
 		case K_ENTER:
@@ -1133,7 +1175,8 @@
 					pos = list_entry(pos->node.prev, struct perf_evsel, node);
 				goto browse_hists;
 			case K_ESC:
-				if (!ui__dialog_yesno("Do you really want to exit?"))
+				if (!ui_browser__dialog_yesno(&menu->b,
+						"Do you really want to exit?"))
 					continue;
 				/* Fall thru */
 			case 'q':
@@ -1145,7 +1188,8 @@
 		case K_LEFT:
 			continue;
 		case K_ESC:
-			if (!ui__dialog_yesno("Do you really want to exit?"))
+			if (!ui_browser__dialog_yesno(&menu->b,
+					       "Do you really want to exit?"))
 				continue;
 			/* Fall thru */
 		case 'q':
diff --git a/tools/perf/util/ui/helpline.c b/tools/perf/util/ui/helpline.c
index f36d2ff5..6ef3c56 100644
--- a/tools/perf/util/ui/helpline.c
+++ b/tools/perf/util/ui/helpline.c
@@ -1,20 +1,28 @@
 #define _GNU_SOURCE
 #include <stdio.h>
 #include <stdlib.h>
-#include <newt.h>
+#include <string.h>
 
 #include "../debug.h"
 #include "helpline.h"
 #include "ui.h"
+#include "libslang.h"
 
 void ui_helpline__pop(void)
 {
-	newtPopHelpLine();
 }
 
+char ui_helpline__current[512];
+
 void ui_helpline__push(const char *msg)
 {
-	newtPushHelpLine(msg);
+	const size_t sz = sizeof(ui_helpline__current);
+
+	SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
+	SLsmg_set_color(0);
+	SLsmg_write_nstring((char *)msg, SLtt_Screen_Cols);
+	SLsmg_refresh();
+	strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
 }
 
 void ui_helpline__vpush(const char *fmt, va_list ap)
@@ -63,7 +71,7 @@
 
 	if (ui_helpline__last_msg[backlog - 1] == '\n') {
 		ui_helpline__puts(ui_helpline__last_msg);
-		newtRefresh();
+		SLsmg_refresh();
 		backlog = 0;
 	}
 	pthread_mutex_unlock(&ui__lock);
diff --git a/tools/perf/util/ui/helpline.h b/tools/perf/util/ui/helpline.h
index fdcbc02..7bab6b3 100644
--- a/tools/perf/util/ui/helpline.h
+++ b/tools/perf/util/ui/helpline.h
@@ -11,4 +11,6 @@
 void ui_helpline__fpush(const char *fmt, ...);
 void ui_helpline__puts(const char *msg);
 
+extern char ui_helpline__current[];
+
 #endif /* _PERF_UI_HELPLINE_H_ */
diff --git a/tools/perf/util/ui/progress.c b/tools/perf/util/ui/progress.c
index d7fc399..295e366 100644
--- a/tools/perf/util/ui/progress.c
+++ b/tools/perf/util/ui/progress.c
@@ -1,60 +1,29 @@
-#include <stdlib.h>
-#include <newt.h>
 #include "../cache.h"
 #include "progress.h"
+#include "libslang.h"
+#include "ui.h"
+#include "browser.h"
 
-struct ui_progress {
-	newtComponent form, scale;
-};
-
-struct ui_progress *ui_progress__new(const char *title, u64 total)
+void ui_progress__update(u64 curr, u64 total, const char *title)
 {
-	struct ui_progress *self = malloc(sizeof(*self));
-
-	if (self != NULL) {
-		int cols;
-
-		if (use_browser <= 0)
-			return self;
-		newtGetScreenSize(&cols, NULL);
-		cols -= 4;
-		newtCenteredWindow(cols, 1, title);
-		self->form  = newtForm(NULL, NULL, 0);
-		if (self->form == NULL)
-			goto out_free_self;
-		self->scale = newtScale(0, 0, cols, total);
-		if (self->scale == NULL)
-			goto out_free_form;
-		newtFormAddComponent(self->form, self->scale);
-		newtRefresh();
-	}
-
-	return self;
-
-out_free_form:
-	newtFormDestroy(self->form);
-out_free_self:
-	free(self);
-	return NULL;
-}
-
-void ui_progress__update(struct ui_progress *self, u64 curr)
-{
+	int bar, y;
 	/*
 	 * FIXME: We should have a per UI backend way of showing progress,
 	 * stdio will just show a percentage as NN%, etc.
 	 */
 	if (use_browser <= 0)
 		return;
-	newtScaleSet(self->scale, curr);
-	newtRefresh();
-}
 
-void ui_progress__delete(struct ui_progress *self)
-{
-	if (use_browser > 0) {
-		newtFormDestroy(self->form);
-		newtPopWindow();
-	}
-	free(self);
+	ui__refresh_dimensions(true);
+	pthread_mutex_lock(&ui__lock);
+	y = SLtt_Screen_Rows / 2 - 2;
+	SLsmg_set_color(0);
+	SLsmg_draw_box(y, 0, 3, SLtt_Screen_Cols);
+	SLsmg_gotorc(y++, 1);
+	SLsmg_write_string((char *)title);
+	SLsmg_set_color(HE_COLORSET_SELECTED);
+	bar = ((SLtt_Screen_Cols - 2) * curr) / total;
+	SLsmg_fill_region(y, 1, 1, bar, ' ');
+	SLsmg_refresh();
+	pthread_mutex_unlock(&ui__lock);
 }
diff --git a/tools/perf/util/ui/progress.h b/tools/perf/util/ui/progress.h
index a3820a0..d9c205b 100644
--- a/tools/perf/util/ui/progress.h
+++ b/tools/perf/util/ui/progress.h
@@ -1,11 +1,8 @@
 #ifndef _PERF_UI_PROGRESS_H_
 #define _PERF_UI_PROGRESS_H_ 1
 
-struct ui_progress;
+#include <../types.h>
 
-struct ui_progress *ui_progress__new(const char *title, u64 total);
-void ui_progress__delete(struct ui_progress *self);
-
-void ui_progress__update(struct ui_progress *self, u64 curr);
+void ui_progress__update(u64 curr, u64 total, const char *title);
 
 #endif
diff --git a/tools/perf/util/ui/setup.c b/tools/perf/util/ui/setup.c
index 1e6ba06..85a69fa 100644
--- a/tools/perf/util/ui/setup.c
+++ b/tools/perf/util/ui/setup.c
@@ -7,10 +7,85 @@
 #include "browser.h"
 #include "helpline.h"
 #include "ui.h"
+#include "util.h"
 #include "libslang.h"
+#include "keysyms.h"
 
 pthread_mutex_t ui__lock = PTHREAD_MUTEX_INITIALIZER;
 
+static volatile int ui__need_resize;
+
+void ui__refresh_dimensions(bool force)
+{
+	if (force || ui__need_resize) {
+		ui__need_resize = 0;
+		pthread_mutex_lock(&ui__lock);
+		SLtt_get_screen_size();
+		SLsmg_reinit_smg();
+		pthread_mutex_unlock(&ui__lock);
+	}
+}
+
+static void ui__sigwinch(int sig __used)
+{
+	ui__need_resize = 1;
+}
+
+static void ui__setup_sigwinch(void)
+{
+	static bool done;
+
+	if (done)
+		return;
+
+	done = true;
+	pthread__unblock_sigwinch();
+	signal(SIGWINCH, ui__sigwinch);
+}
+
+int ui__getch(int delay_secs)
+{
+	struct timeval timeout, *ptimeout = delay_secs ? &timeout : NULL;
+	fd_set read_set;
+	int err, key;
+
+	ui__setup_sigwinch();
+
+	FD_ZERO(&read_set);
+	FD_SET(0, &read_set);
+
+	if (delay_secs) {
+		timeout.tv_sec = delay_secs;
+		timeout.tv_usec = 0;
+	}
+
+        err = select(1, &read_set, NULL, NULL, ptimeout);
+
+	if (err == 0)
+		return K_TIMER;
+
+	if (err == -1) {
+		if (errno == EINTR)
+			return K_RESIZE;
+		return K_ERROR;
+	}
+
+	key = SLang_getkey();
+	if (key != K_ESC)
+		return key;
+
+	FD_ZERO(&read_set);
+	FD_SET(0, &read_set);
+	timeout.tv_sec = 0;
+	timeout.tv_usec = 20;
+        err = select(1, &read_set, NULL, NULL, &timeout);
+	if (err == 0)
+		return K_ESC;
+
+	SLang_ungetkey(key);
+	return SLkp_getkey();
+}
+
 static void newt_suspend(void *d __used)
 {
 	newtSuspend();
@@ -71,10 +146,10 @@
 void exit_browser(bool wait_for_ok)
 {
 	if (use_browser > 0) {
-		if (wait_for_ok) {
-			char title[] = "Fatal Error", ok[] = "Ok";
-			newtWinMessage(title, ok, ui_helpline__last_msg);
-		}
+		if (wait_for_ok)
+			ui__question_window("Fatal Error",
+					    ui_helpline__last_msg,
+					    "Press any key...", 0);
 		ui__exit();
 	}
 }
diff --git a/tools/perf/util/ui/ui.h b/tools/perf/util/ui/ui.h
index d264e05..7b67045 100644
--- a/tools/perf/util/ui/ui.h
+++ b/tools/perf/util/ui/ui.h
@@ -2,7 +2,10 @@
 #define _PERF_UI_H_ 1
 
 #include <pthread.h>
+#include <stdbool.h>
 
 extern pthread_mutex_t ui__lock;
 
+void ui__refresh_dimensions(bool force);
+
 #endif /* _PERF_UI_H_ */
diff --git a/tools/perf/util/ui/util.c b/tools/perf/util/ui/util.c
index fdf1fc8..45daa7c 100644
--- a/tools/perf/util/ui/util.c
+++ b/tools/perf/util/ui/util.c
@@ -1,6 +1,5 @@
-#include <newt.h>
+#include "../util.h"
 #include <signal.h>
-#include <stdio.h>
 #include <stdbool.h>
 #include <string.h>
 #include <sys/ttydefaults.h>
@@ -8,72 +7,75 @@
 #include "../cache.h"
 #include "../debug.h"
 #include "browser.h"
+#include "keysyms.h"
 #include "helpline.h"
 #include "ui.h"
 #include "util.h"
+#include "libslang.h"
 
-static void newt_form__set_exit_keys(newtComponent self)
+static void ui_browser__argv_write(struct ui_browser *browser,
+				   void *entry, int row)
 {
-	newtFormAddHotKey(self, NEWT_KEY_LEFT);
-	newtFormAddHotKey(self, NEWT_KEY_ESCAPE);
-	newtFormAddHotKey(self, 'Q');
-	newtFormAddHotKey(self, 'q');
-	newtFormAddHotKey(self, CTRL('c'));
+	char **arg = entry;
+	bool current_entry = ui_browser__is_current_entry(browser, row);
+
+	ui_browser__set_color(browser, current_entry ? HE_COLORSET_SELECTED :
+						       HE_COLORSET_NORMAL);
+	slsmg_write_nstring(*arg, browser->width);
 }
 
-static newtComponent newt_form__new(void)
+static int popup_menu__run(struct ui_browser *menu)
 {
-	newtComponent self = newtForm(NULL, NULL, 0);
-	if (self)
-		newt_form__set_exit_keys(self);
-	return self;
+	int key;
+
+	if (ui_browser__show(menu, " ", "ESC: exit, ENTER|->: Select option") < 0)
+		return -1;
+
+	while (1) {
+		key = ui_browser__run(menu, 0);
+
+		switch (key) {
+		case K_RIGHT:
+		case K_ENTER:
+			key = menu->index;
+			break;
+		case K_LEFT:
+		case K_ESC:
+		case 'q':
+		case CTRL('c'):
+			key = -1;
+			break;
+		default:
+			continue;
+		}
+
+		break;
+	}
+
+	ui_browser__hide(menu);
+	return key;
 }
 
 int ui__popup_menu(int argc, char * const argv[])
 {
-	struct newtExitStruct es;
-	int i, rc = -1, max_len = 5;
-	newtComponent listbox, form = newt_form__new();
+	struct ui_browser menu = {
+		.entries    = (void *)argv,
+		.refresh    = ui_browser__argv_refresh,
+		.seek	    = ui_browser__argv_seek,
+		.write	    = ui_browser__argv_write,
+		.nr_entries = argc,
+	};
 
-	if (form == NULL)
-		return -1;
-
-	listbox = newtListbox(0, 0, argc, NEWT_FLAG_RETURNEXIT);
-	if (listbox == NULL)
-		goto out_destroy_form;
-
-	newtFormAddComponent(form, listbox);
-
-	for (i = 0; i < argc; ++i) {
-		int len = strlen(argv[i]);
-		if (len > max_len)
-			max_len = len;
-		if (newtListboxAddEntry(listbox, argv[i], (void *)(long)i))
-			goto out_destroy_form;
-	}
-
-	newtCenteredWindow(max_len, argc, NULL);
-	newtFormRun(form, &es);
-	rc = newtListboxGetCurrent(listbox) - NULL;
-	if (es.reason == NEWT_EXIT_HOTKEY)
-		rc = -1;
-	newtPopWindow();
-out_destroy_form:
-	newtFormDestroy(form);
-	return rc;
+	return popup_menu__run(&menu);
 }
 
-int ui__help_window(const char *text)
+int ui__question_window(const char *title, const char *text,
+			const char *exit_msg, int delay_secs)
 {
-	struct newtExitStruct es;
-	newtComponent tb, form = newt_form__new();
-	int rc = -1;
+	int x, y;
 	int max_len = 0, nr_lines = 0;
 	const char *t;
 
-	if (form == NULL)
-		return -1;
-
 	t = text;
 	while (1) {
 		const char *sep = strchr(t, '\n');
@@ -90,41 +92,77 @@
 		t = sep + 1;
 	}
 
-	tb = newtTextbox(0, 0, max_len, nr_lines, 0);
-	if (tb == NULL)
-		goto out_destroy_form;
+	max_len += 2;
+	nr_lines += 4;
+	y = SLtt_Screen_Rows / 2 - nr_lines / 2,
+	x = SLtt_Screen_Cols / 2 - max_len / 2;
 
-	newtTextboxSetText(tb, text);
-	newtFormAddComponent(form, tb);
-	newtCenteredWindow(max_len, nr_lines, NULL);
-	newtFormRun(form, &es);
-	newtPopWindow();
-	rc = 0;
-out_destroy_form:
-	newtFormDestroy(form);
-	return rc;
+	SLsmg_set_color(0);
+	SLsmg_draw_box(y, x++, nr_lines, max_len);
+	if (title) {
+		SLsmg_gotorc(y, x + 1);
+		SLsmg_write_string((char *)title);
+	}
+	SLsmg_gotorc(++y, x);
+	nr_lines -= 2;
+	max_len -= 2;
+	SLsmg_write_wrapped_string((unsigned char *)text, y, x,
+				   nr_lines, max_len, 1);
+	SLsmg_gotorc(y + nr_lines - 2, x);
+	SLsmg_write_nstring((char *)" ", max_len);
+	SLsmg_gotorc(y + nr_lines - 1, x);
+	SLsmg_write_nstring((char *)exit_msg, max_len);
+	SLsmg_refresh();
+	return ui__getch(delay_secs);
 }
 
-static const char yes[] = "Yes", no[] = "No",
-		  warning_str[] = "Warning!", ok[] = "Ok";
-
-bool ui__dialog_yesno(const char *msg)
+int ui__help_window(const char *text)
 {
-	/* newtWinChoice should really be accepting const char pointers... */
-	return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1;
+	return ui__question_window("Help", text, "Press any key...", 0);
 }
 
-void ui__warning(const char *format, ...)
+int ui__dialog_yesno(const char *msg)
 {
+	return ui__question_window(NULL, msg, "Enter: Yes, ESC: No", 0);
+}
+
+int __ui__warning(const char *title, const char *format, va_list args)
+{
+	char *s;
+
+	if (use_browser > 0 && vasprintf(&s, format, args) > 0) {
+		int key;
+
+		pthread_mutex_lock(&ui__lock);
+		key = ui__question_window(title, s, "Press any key...", 0);
+		pthread_mutex_unlock(&ui__lock);
+		free(s);
+		return key;
+	}
+
+	fprintf(stderr, "%s:\n", title);
+	vfprintf(stderr, format, args);
+	return K_ESC;
+}
+
+int ui__warning(const char *format, ...)
+{
+	int key;
 	va_list args;
 
 	va_start(args, format);
-	if (use_browser > 0) {
-		pthread_mutex_lock(&ui__lock);
-		newtWinMessagev((char *)warning_str, (char *)ok,
-				(char *)format, args);
-		pthread_mutex_unlock(&ui__lock);
-	} else
-		vfprintf(stderr, format, args);
+	key = __ui__warning("Warning", format, args);
 	va_end(args);
+	return key;
+}
+
+int ui__error(const char *format, ...)
+{
+	int key;
+	va_list args;
+
+	va_start(args, format);
+	key = __ui__warning("Error", format, args);
+	va_end(args);
+	return key;
 }
diff --git a/tools/perf/util/ui/util.h b/tools/perf/util/ui/util.h
index afcbc1d..2d1738b 100644
--- a/tools/perf/util/ui/util.h
+++ b/tools/perf/util/ui/util.h
@@ -1,10 +1,14 @@
 #ifndef _PERF_UI_UTIL_H_
 #define _PERF_UI_UTIL_H_ 1
 
-#include <stdbool.h>
+#include <stdarg.h>
 
+int ui__getch(int delay_secs);
 int ui__popup_menu(int argc, char * const argv[]);
 int ui__help_window(const char *text);
-bool ui__dialog_yesno(const char *msg);
+int ui__dialog_yesno(const char *msg);
+int ui__question_window(const char *title, const char *text,
+			const char *exit_msg, int delay_secs);
+int __ui__warning(const char *title, const char *format, va_list args);
 
 #endif /* _PERF_UI_UTIL_H_ */
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 8b2d37b..3c6f780 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -162,19 +162,21 @@
 
 void dump_cnt(struct counters *cnt)
 {
-	fprintf(stderr, "package: %d ", cnt->pkg);
-	fprintf(stderr, "core:: %d ", cnt->core);
-	fprintf(stderr, "CPU: %d ", cnt->cpu);
-	fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
-	fprintf(stderr, "c3: %016llX\n", cnt->c3);
-	fprintf(stderr, "c6: %016llX\n", cnt->c6);
-	fprintf(stderr, "c7: %016llX\n", cnt->c7);
-	fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
-	fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
-	fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
-	fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
-	fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
-	fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
+	if (!cnt)
+		return;
+	if (cnt->pkg) fprintf(stderr, "package: %d ", cnt->pkg);
+	if (cnt->core) fprintf(stderr, "core:: %d ", cnt->core);
+	if (cnt->cpu) fprintf(stderr, "CPU: %d ", cnt->cpu);
+	if (cnt->tsc) fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
+	if (cnt->c3) fprintf(stderr, "c3: %016llX\n", cnt->c3);
+	if (cnt->c6) fprintf(stderr, "c6: %016llX\n", cnt->c6);
+	if (cnt->c7) fprintf(stderr, "c7: %016llX\n", cnt->c7);
+	if (cnt->aperf) fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
+	if (cnt->pc2) fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
+	if (cnt->pc3) fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
+	if (cnt->pc6) fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
+	if (cnt->pc7) fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
+	if (cnt->extra_msr) fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
 }
 
 void dump_list(struct counters *cnt)
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 8d02ccb..8b4c253 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -42,6 +42,7 @@
 $default{"BISECT_SKIP"}		= 1;
 $default{"SUCCESS_LINE"}	= "login:";
 $default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"}		= 0;
 $default{"BOOTED_TIMEOUT"}	= 1;
 $default{"DIE_ON_FAILURE"}	= 1;
 $default{"SSH_EXEC"}		= "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -84,6 +85,7 @@
 my $target;
 my $make;
 my $post_install;
+my $no_install;
 my $noclean;
 my $minconfig;
 my $start_minconfig;
@@ -115,6 +117,7 @@
 my $booted_timeout;
 my $detect_triplefault;
 my $console;
+my $reboot_success_line;
 my $success_line;
 my $stop_after_success;
 my $stop_after_failure;
@@ -130,6 +133,12 @@
 my %variable;
 my %force_config;
 
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
 $config_help{"MACHINE"} = << "EOF"
  The machine hostname that you will test.
 EOF
@@ -241,6 +250,7 @@
 
 sub get_ktest_config {
     my ($config) = @_;
+    my $ans;
 
     return if (defined($opt{$config}));
 
@@ -254,16 +264,17 @@
 	if (defined($default{$config})) {
 	    print "\[$default{$config}\] ";
 	}
-	$entered_configs{$config} = <STDIN>;
-	$entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
-	if ($entered_configs{$config} =~ /^\s*$/) {
+	$ans = <STDIN>;
+	$ans =~ s/^\s*(.*\S)\s*$/$1/;
+	if ($ans =~ /^\s*$/) {
 	    if ($default{$config}) {
-		$entered_configs{$config} = $default{$config};
+		$ans = $default{$config};
 	    } else {
 		print "Your answer can not be blank\n";
 		next;
 	    }
 	}
+	$entered_configs{$config} = process_variables($ans);
 	last;
     }
 }
@@ -298,7 +309,7 @@
 }
 
 sub process_variables {
-    my ($value) = @_;
+    my ($value, $remove_undef) = @_;
     my $retval = "";
 
     # We want to check for '\', and it is just easier
@@ -316,6 +327,10 @@
 	$retval = "$retval$begin";
 	if (defined($variable{$var})) {
 	    $retval = "$retval$variable{$var}";
+	} elsif (defined($remove_undef) && $remove_undef) {
+	    # for if statements, any variable that is not defined,
+	    # we simple convert to 0
+	    $retval = "${retval}0";
 	} else {
 	    # put back the origin piece.
 	    $retval = "$retval\$\{$var\}";
@@ -331,10 +346,17 @@
 }
 
 sub set_value {
-    my ($lvalue, $rvalue) = @_;
+    my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
 
     if (defined($opt{$lvalue})) {
-	die "Error: Option $lvalue defined more than once!\n";
+	if (!$override || defined(${$overrides}{$lvalue})) {
+	    my $extra = "";
+	    if ($override) {
+		$extra = "In the same override section!\n";
+	    }
+	    die "$name: $.: Option $lvalue defined more than once!\n$extra";
+	}
+	${$overrides}{$lvalue} = $rvalue;
     }
     if ($rvalue =~ /^\s*$/) {
 	delete $opt{$lvalue};
@@ -355,86 +377,274 @@
     }
 }
 
-sub read_config {
-    my ($config) = @_;
+sub process_compare {
+    my ($lval, $cmp, $rval) = @_;
 
-    open(IN, $config) || die "can't read file $config";
+    # remove whitespace
+
+    $lval =~ s/^\s*//;
+    $lval =~ s/\s*$//;
+
+    $rval =~ s/^\s*//;
+    $rval =~ s/\s*$//;
+
+    if ($cmp eq "==") {
+	return $lval eq $rval;
+    } elsif ($cmp eq "!=") {
+	return $lval ne $rval;
+    }
+
+    my $statement = "$lval $cmp $rval";
+    my $ret = eval $statement;
+
+    # $@ stores error of eval
+    if ($@) {
+	return -1;
+    }
+
+    return $ret;
+}
+
+sub value_defined {
+    my ($val) = @_;
+
+    return defined($variable{$2}) ||
+	defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+    my ($name, $val) = @_;
+
+    my $c = $d++;
+
+    while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+	my $express = $1;
+
+	if (process_expression($name, $express)) {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+	} else {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+	}
+    }
+
+    $d--;
+    my $OR = "\\|\\|";
+    my $AND = "\\&\\&";
+
+    while ($val =~ s/^(.*?)($OR|$AND)//) {
+	my $express = $1;
+	my $op = $2;
+
+	if (process_expression($name, $express)) {
+	    if ($op eq "||") {
+		return 1;
+	    }
+	} else {
+	    if ($op eq "&&") {
+		return 0;
+	    }
+	}
+    }
+
+    if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+	my $ret = process_compare($1, $2, $3);
+	if ($ret < 0) {
+	    die "$name: $.: Unable to process comparison\n";
+	}
+	return $ret;
+    }
+
+    if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+	if (defined $1) {
+	    return !value_defined($2);
+	} else {
+	    return value_defined($2);
+	}
+    }
+
+    if ($val =~ /^\s*0\s*$/) {
+	return 0;
+    } elsif ($val =~ /^\s*\d+\s*$/) {
+	return 1;
+    }
+
+    die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+    my ($name, $value) = @_;
+
+    # Convert variables and replace undefined ones with 0
+    my $val = process_variables($value, 1);
+    my $ret = process_expression $name, $val;
+
+    return $ret;
+}
+
+sub __read_config {
+    my ($config, $current_test_num) = @_;
+
+    my $in;
+    open($in, $config) || die "can't read file $config";
 
     my $name = $config;
     $name =~ s,.*/(.*),$1,;
 
-    my $test_num = 0;
+    my $test_num = $$current_test_num;
     my $default = 1;
     my $repeat = 1;
     my $num_tests_set = 0;
     my $skip = 0;
     my $rest;
+    my $line;
     my $test_case = 0;
+    my $if = 0;
+    my $if_set = 0;
+    my $override = 0;
 
-    while (<IN>) {
+    my %overrides;
+
+    while (<$in>) {
 
 	# ignore blank lines and comments
 	next if (/^\s*$/ || /\s*\#/);
 
-	if (/^\s*TEST_START(.*)/) {
+	if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
 
-	    $rest = $1;
+	    my $type = $1;
+	    $rest = $2;
+	    $line = $2;
 
-	    if ($num_tests_set) {
-		die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+	    my $old_test_num;
+	    my $old_repeat;
+	    $override = 0;
+
+	    if ($type eq "TEST_START") {
+
+		if ($num_tests_set) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+
+		$old_test_num = $test_num;
+		$old_repeat = $repeat;
+
+		$test_num += $repeat;
+		$default = 0;
+		$repeat = 1;
+	    } else {
+		$default = 1;
 	    }
 
-	    my $old_test_num = $test_num;
-	    my $old_repeat = $repeat;
-
-	    $test_num += $repeat;
-	    $default = 0;
-	    $repeat = 1;
-
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
+	    # If SKIP is anywhere in the line, the command will be skipped
+	    if ($rest =~ s/\s+SKIP\b//) {
 		$skip = 1;
 	    } else {
 		$test_case = 1;
 		$skip = 0;
 	    }
 
-	    if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
-		$repeat = $1;
-		$rest = $2;
-		$repeat_tests{"$test_num"} = $repeat;
+	    if ($rest =~ s/\sELSE\b//) {
+		if (!$if) {
+		    die "$name: $.: ELSE found with out matching IF section\n$_";
+		}
+		$if = 0;
+
+		if ($if_set) {
+		    $skip = 1;
+		} else {
+		    $skip = 0;
+		}
 	    }
 
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
-		$skip = 1;
+	    if ($rest =~ s/\sIF\s+(.*)//) {
+		if (process_if($name, $1)) {
+		    $if_set = 1;
+		} else {
+		    $skip = 1;
+		}
+		$if = 1;
+	    } else {
+		$if = 0;
+		$if_set = 0;
 	    }
 
-	    if ($rest !~ /^\s*$/) {
-		die "$name: $.: Gargbage found after TEST_START\n$_";
+	    if (!$skip) {
+		if ($type eq "TEST_START") {
+		    if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+			$repeat = $1;
+			$repeat_tests{"$test_num"} = $repeat;
+		    }
+		} elsif ($rest =~ s/\sOVERRIDE\b//) {
+		    # DEFAULT only
+		    $override = 1;
+		    # Clear previous overrides
+		    %overrides = ();
+		}
 	    }
 
-	    if ($skip) {
+	    if (!$skip && $rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after $type\n$_";
+	    }
+
+	    if ($skip && $type eq "TEST_START") {
 		$test_num = $old_test_num;
 		$repeat = $old_repeat;
 	    }
 
-	} elsif (/^\s*DEFAULTS(.*)$/) {
-	    $default = 1;
-
+	} elsif (/^\s*ELSE\b(.*)$/) {
+	    if (!$if) {
+		die "$name: $.: ELSE found with out matching IF section\n$_";
+	    }
 	    $rest = $1;
-
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
+	    if ($if_set) {
 		$skip = 1;
+		$rest = "";
 	    } else {
 		$skip = 0;
+
+		if ($rest =~ /\sIF\s+(.*)/) {
+		    # May be a ELSE IF section.
+		    if (!process_if($name, $1)) {
+			$skip = 1;
+		    }
+		    $rest = "";
+		} else {
+		    $if = 0;
+		}
 	    }
 
 	    if ($rest !~ /^\s*$/) {
 		die "$name: $.: Gargbage found after DEFAULTS\n$_";
 	    }
 
+	} elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+	    next if ($skip);
+
+	    if (!$default) {
+		die "$name: $.: INCLUDE can only be done in default sections\n$_";
+	    }
+
+	    my $file = process_variables($1);
+
+	    if ($file !~ m,^/,) {
+		# check the path of the config file first
+		if ($config =~ m,(.*)/,) {
+		    if (-f "$1/$file") {
+			$file = "$1/$file";
+		    }
+		}
+	    }
+		
+	    if ( ! -r $file ) {
+		die "$name: $.: Can't read file $file\n$_";
+	    }
+
+	    if (__read_config($file, \$test_num)) {
+		$test_case = 1;
+	    }
+
 	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
 
 	    next if ($skip);
@@ -460,10 +670,10 @@
 	    }
 
 	    if ($default || $lvalue =~ /\[\d+\]$/) {
-		set_value($lvalue, $rvalue);
+		set_value($lvalue, $rvalue, $override, \%overrides, $name);
 	    } else {
 		my $val = "$lvalue\[$test_num\]";
-		set_value($val, $rvalue);
+		set_value($val, $rvalue, $override, \%overrides, $name);
 
 		if ($repeat > 1) {
 		    $repeats{$val} = $repeat;
@@ -490,13 +700,26 @@
 	}
     }
 
-    close(IN);
-
     if ($test_num) {
 	$test_num += $repeat - 1;
 	$opt{"NUM_TESTS"} = $test_num;
     }
 
+    close($in);
+
+    $$current_test_num = $test_num;
+
+    return $test_case;
+}
+
+sub read_config {
+    my ($config) = @_;
+
+    my $test_case;
+    my $test_num = 0;
+
+    $test_case = __read_config $config, \$test_num;
+
     # make sure we have all mandatory configs
     get_ktest_configs;
 
@@ -524,6 +747,18 @@
     # Add space to evaluate the character before $
     $option = " $option";
     my $retval = "";
+    my $repeated = 0;
+    my $parent = 0;
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+
+	    $repeated = 1;
+	    $parent = $test;
+	    last;
+	}
+    }
 
     while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
 	my $start = $1;
@@ -537,10 +772,14 @@
 	# otherwise see if the default OPT (without [$i]) exists.
 
 	my $o = "$var\[$i\]";
+	my $parento = "$var\[$parent\]";
 
 	if (defined($opt{$o})) {
 	    $o = $opt{$o};
 	    $retval = "$retval$o";
+	} elsif ($repeated && defined($opt{$parento})) {
+	    $o = $opt{$parento};
+	    $retval = "$retval$o";
 	} elsif (defined($opt{$var})) {
 	    $o = $opt{$var};
 	    $retval = "$retval$o";
@@ -603,8 +842,20 @@
 }
 
 sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
 
 sub reboot {
+    my ($time) = @_;
+
+    if (defined($time)) {
+	start_monitor;
+	# flush out current monitor
+	# May contain the reboot success line
+	wait_for_monitor 1;
+    }
+
     # try to reboot normally
     if (run_command $reboot) {
 	if (defined($powercycle_after_reboot)) {
@@ -615,12 +866,17 @@
 	# nope? power cycle it.
 	run_command "$power_cycle";
     }
+
+    if (defined($time)) {
+	wait_for_monitor($time, $reboot_success_line);
+	end_monitor;
+    }
 }
 
 sub do_not_reboot {
     my $i = $iteration;
 
-    return $test_type eq "build" ||
+    return $test_type eq "build" || $no_reboot ||
 	($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
 	($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
 }
@@ -693,16 +949,29 @@
 }
 
 sub wait_for_monitor {
-    my ($time) = @_;
+    my ($time, $stop) = @_;
+    my $full_line = "";
     my $line;
+    my $booted = 0;
 
     doprint "** Wait for monitor to settle down **\n";
 
     # read the monitor and wait for the system to calm down
-    do {
+    while (!$booted) {
 	$line = wait_for_input($monitor_fp, $time);
-	print "$line" if (defined($line));
-    } while (defined($line));
+	last if (!defined($line));
+	print "$line";
+	$full_line .= $line;
+
+	if (defined($stop) && $full_line =~ /$stop/) {
+	    doprint "wait for monitor detected $stop\n";
+	    $booted = 1;
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+    }
     print "** Monitor flushed **\n";
 }
 
@@ -719,10 +988,7 @@
 	# no need to reboot for just building.
 	if (!do_not_reboot) {
 	    doprint "REBOOTING\n";
-	    reboot;
-	    start_monitor;
-	    wait_for_monitor $sleep_time;
-	    end_monitor;
+	    reboot $sleep_time;
 	}
 
 	my $name = "";
@@ -854,9 +1120,12 @@
     open(IN, "$ssh_grub |")
 	or die "unable to get menu.lst";
 
+    my $found = 0;
+
     while (<IN>) {
 	if (/^\s*title\s+$grub_menu\s*$/) {
 	    $grub_number++;
+	    $found = 1;
 	    last;
 	} elsif (/^\s*title\s/) {
 	    $grub_number++;
@@ -865,7 +1134,7 @@
     close(IN);
 
     die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
-	if ($grub_number < 0);
+	if (!$found);
     doprint "$grub_number\n";
 }
 
@@ -902,7 +1171,8 @@
 
 sub reboot_to {
     if ($reboot_type eq "grub") {
-	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+	reboot;
 	return;
     }
 
@@ -1083,6 +1353,8 @@
 
 sub install {
 
+    return if ($no_install);
+
     run_scp "$outputdir/$build_target", "$target_image" or
 	dodie "failed to copy image";
 
@@ -1140,6 +1412,11 @@
 }
 
 sub start_monitor_and_boot {
+    # Make sure the stable kernel has finished booting
+    start_monitor;
+    wait_for_monitor 5;
+    end_monitor;
+
     get_grub_index;
     get_version;
     install;
@@ -1250,6 +1527,10 @@
 
     unlink $buildlog;
 
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
     if (defined($pre_build)) {
 	my $ret = run_command $pre_build;
 	if (!$ret && defined($pre_build_die) &&
@@ -1272,16 +1553,16 @@
 	# allow for empty configs
 	run_command "touch $output_config";
 
-	run_command "mv $output_config $outputdir/config_temp" or
-	    dodie "moving .config";
+	if (!$noclean) {
+	    run_command "mv $output_config $outputdir/config_temp" or
+		dodie "moving .config";
 
-	if (!$noclean && !run_command "$make mrproper") {
-	    dodie "make mrproper";
+	    run_command "$make mrproper" or dodie "make mrproper";
+
+	    run_command "mv $outputdir/config_temp $output_config" or
+		dodie "moving config_temp";
 	}
 
-	run_command "mv $outputdir/config_temp $output_config" or
-	    dodie "moving config_temp";
-
     } elsif (!$noclean) {
 	unlink "$output_config";
 	run_command "$make mrproper" or
@@ -1318,10 +1599,15 @@
 
     if (!$build_ret) {
 	# bisect may need this to pass
-	return 0 if ($in_bisect);
+	if ($in_bisect) {
+	    $no_reboot = $save_no_reboot;
+	    return 0;
+	}
 	fail "failed build" and return 0;
     }
 
+    $no_reboot = $save_no_reboot;
+
     return 1;
 }
 
@@ -1356,10 +1642,7 @@
 
     if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
 	doprint "Reboot and wait $sleep_time seconds\n";
-	reboot;
-	start_monitor;
-	wait_for_monitor $sleep_time;
-	end_monitor;
+	reboot $sleep_time;
     }
 }
 
@@ -1500,10 +1783,7 @@
 
 sub bisect_reboot {
     doprint "Reboot and sleep $bisect_sleep_time seconds\n";
-    reboot;
-    start_monitor;
-    wait_for_monitor $bisect_sleep_time;
-    end_monitor;
+    reboot $bisect_sleep_time;
 }
 
 # returns 1 on success, 0 on failure, -1 on skip
@@ -2066,10 +2346,7 @@
 
 sub patchcheck_reboot {
     doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
-    reboot;
-    start_monitor;
-    wait_for_monitor $patchcheck_sleep_time;
-    end_monitor;
+    reboot $patchcheck_sleep_time;
 }
 
 sub patchcheck {
@@ -2178,12 +2455,31 @@
 }
 
 my %depends;
+my %depcount;
 my $iflevel = 0;
 my @ifdeps;
 
 # prevent recursion
 my %read_kconfigs;
 
+sub add_dep {
+    # $config depends on $dep
+    my ($config, $dep) = @_;
+
+    if (defined($depends{$config})) {
+	$depends{$config} .= " " . $dep;
+    } else {
+	$depends{$config} = $dep;
+    }
+
+    # record the number of configs depending on $dep
+    if (defined $depcount{$dep}) {
+	$depcount{$dep}++;
+    } else {
+	$depcount{$dep} = 1;
+    } 
+}
+
 # taken from streamline_config.pl
 sub read_kconfig {
     my ($kconfig) = @_;
@@ -2230,30 +2526,19 @@
 	    $config = $2;
 
 	    for (my $i = 0; $i < $iflevel; $i++) {
-		if ($i) {
-		    $depends{$config} .= " " . $ifdeps[$i];
-		} else {
-		    $depends{$config} = $ifdeps[$i];
-		}
-		$state = "DEP";
+		add_dep $config, $ifdeps[$i];
 	    }
 
 	# collect the depends for the config
 	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
 
-	    if (defined($depends{$1})) {
-		$depends{$config} .= " " . $1;
-	    } else {
-		$depends{$config} = $1;
-	    }
+	    add_dep $config, $1;
 
 	# Get the configs that select this config
-	} elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
-	    if (defined($depends{$1})) {
-		$depends{$1} .= " " . $config;
-	    } else {
-		$depends{$1} = $config;
-	    }
+	} elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+	    # selected by depends on config
+	    add_dep $1, $config;
 
 	# Check for if statements
 	} elsif (/^if\s+(.*\S)\s*$/) {
@@ -2365,11 +2650,18 @@
     close OUT;
 }
 
+sub chomp_config {
+    my ($config) = @_;
+
+    $config =~ s/CONFIG_//;
+
+    return $config;
+}
+
 sub get_depends {
     my ($dep) = @_;
 
-    my $kconfig = $dep;
-    $kconfig =~ s/CONFIG_//;
+    my $kconfig = chomp_config $dep;
 
     $dep = $depends{"$kconfig"};
 
@@ -2419,8 +2711,7 @@
 	return undef;
     }
 
-    my $kconfig = $config;
-    $kconfig =~ s/CONFIG_//;
+    my $kconfig = chomp_config $config;
 
     # Test dependencies first
     if (defined($depends{"$kconfig"})) {
@@ -2510,6 +2801,14 @@
 
     my @config_keys = keys %min_configs;
 
+    # All configs need a depcount
+    foreach my $config (@config_keys) {
+	my $kconfig = chomp_config $config;
+	if (!defined $depcount{$kconfig}) {
+		$depcount{$kconfig} = 0;
+	}
+    }
+
     # Remove anything that was set by the make allnoconfig
     # we shouldn't need them as they get set for us anyway.
     foreach my $config (@config_keys) {
@@ -2548,8 +2847,13 @@
 	# Now disable each config one by one and do a make oldconfig
 	# till we find a config that changes our list.
 
-	# Put configs that did not modify the config at the end.
 	my @test_configs = keys %min_configs;
+
+	# Sort keys by who is most dependent on
+	@test_configs = sort  { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+			  @test_configs ;
+
+	# Put configs that did not modify the config at the end.
 	my $reset = 1;
 	for (my $i = 0; $i < $#test_configs; $i++) {
 	    if (!defined($nochange_config{$test_configs[0]})) {
@@ -2659,10 +2963,7 @@
 	}
 
 	doprint "Reboot and wait $sleep_time seconds\n";
-	reboot;
-	start_monitor;
-	wait_for_monitor $sleep_time;
-	end_monitor;
+	reboot $sleep_time;
     }
 
     success $i;
@@ -2783,6 +3084,9 @@
 # First we need to do is the builds
 for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
+    # Do not reboot on failing test options
+    $no_reboot = 1;
+
     $iteration = $i;
 
     my $makecmd = set_test_option("MAKE_CMD", $i);
@@ -2811,6 +3115,7 @@
     $reboot_type = set_test_option("REBOOT_TYPE", $i);
     $grub_menu = set_test_option("GRUB_MENU", $i);
     $post_install = set_test_option("POST_INSTALL", $i);
+    $no_install = set_test_option("NO_INSTALL", $i);
     $reboot_script = set_test_option("REBOOT_SCRIPT", $i);
     $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
     $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
@@ -2832,6 +3137,7 @@
     $console = set_test_option("CONSOLE", $i);
     $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
     $success_line = set_test_option("SUCCESS_LINE", $i);
+    $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
     $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
     $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
     $stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
@@ -2850,9 +3156,11 @@
 
     chdir $builddir || die "can't change directory to $builddir";
 
-    if (!-d $tmpdir) {
-	mkpath($tmpdir) or
-	    die "can't create $tmpdir";
+    foreach my $dir ($tmpdir, $outputdir) {
+	if (!-d $dir) {
+	    mkpath($dir) or
+		die "can't create $dir";
+	}
     }
 
     $ENV{"SSH_USER"} = $ssh_user;
@@ -2889,8 +3197,11 @@
 	$run_type = "ERROR";
     }
 
+    my $installme = "";
+    $installme = " no_install" if ($no_install);
+
     doprint "\n\n";
-    doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+    doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
 
     unlink $dmesg;
     unlink $buildlog;
@@ -2911,6 +3222,9 @@
 	    die "failed to checkout $checkout";
     }
 
+    $no_reboot = 0;
+
+
     if ($test_type eq "bisect") {
 	bisect $i;
 	next;
@@ -2929,6 +3243,13 @@
 	build $build_type or next;
     }
 
+    if ($test_type eq "install") {
+	get_version;
+	install;
+	success $i;
+	next;
+    }
+
     if ($test_type ne "build") {
 	my $failed = 0;
 	start_monitor_and_boot or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b8bcd14..dbedfa1 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -72,6 +72,128 @@
 # the same option name under the same test or as default
 # ktest will fail to execute, and no tests will run.
 #
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+# 
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
 
 #### Config variables ####
 #
@@ -253,9 +375,10 @@
 
 # The default test type (default test)
 # The test types may be:
-#   build - only build the kernel, do nothing else
-#   boot - build and boot the kernel
-#   test - build, boot and if TEST is set, run the test script
+#   build   - only build the kernel, do nothing else
+#   install - build and install, but do nothing else (does not reboot)
+#   boot    - build, install, and boot the kernel
+#   test    - build, boot and if TEST is set, run the test script
 #          (If TEST is not set, it defaults back to boot)
 #   bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
 #   patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
@@ -293,6 +416,13 @@
 # or on some systems:
 #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
 
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
 # If there is a script that you require to run before the build is done
 # you can specify it with PRE_BUILD.
 #
@@ -415,6 +545,14 @@
 # (default "login:")
 #SUCCESS_LINE = login:
 
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
 # In case the console constantly fills the screen, having
 # a specified time to stop the test after success is recommended.
 # (in seconds)
@@ -480,6 +618,8 @@
 # another test. If a reboot to the reliable kernel happens,
 # we wait SLEEP_TIME for the console to stop producing output
 # before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
 # (default 60)
 #SLEEP_TIME = 60
 
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index d5f3b8d..a195c07 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -25,7 +25,9 @@
 
 #include <linux/list.h>
 #include <linux/kvm_host.h>
+#include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/stat.h>
 #include <linux/dmar.h>
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>