blob: 5559dcaddd5e0345f50fdc81299a7d9452a79254 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/pci-acpi.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct pci_root_info {
struct acpi_pci_root_info common;
struct pci_sysdata sd;
#ifdef CONFIG_PCI_MMCONFIG
bool mcfg_added;
u8 start_bus;
u8 end_bus;
#endif
};
static bool pci_use_crs = true;
static bool pci_ignore_seg = false;
static int __init set_use_crs(const struct dmi_system_id *id)
{
pci_use_crs = true;
return 0;
}
static int __init set_nouse_crs(const struct dmi_system_id *id)
{
pci_use_crs = false;
return 0;
}
static int __init set_ignore_seg(const struct dmi_system_id *id)
{
printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
pci_ignore_seg = true;
return 0;
}
static const struct dmi_system_id pci_crs_quirks[] __initconst = {
/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
{
.callback = set_use_crs,
.ident = "IBM System x3800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
/* 2006 AMD HT/VIA system with two host bridges */
{
.callback = set_use_crs,
.ident = "ASRock ALiveSATA2-GLAN",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
/* 2006 AMD HT/VIA system with two host bridges */
{
.callback = set_use_crs,
.ident = "ASUS M2V-MX SE",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
{
.callback = set_use_crs,
.ident = "MSI MS-7253",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
},
},
/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */
/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */
{
.callback = set_use_crs,
.ident = "Foxconn K8M890-8237A",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"),
DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"),
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
},
},
/* Now for the blacklist.. */
/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
{
.callback = set_nouse_crs,
.ident = "Dell Studio 1557",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
DMI_MATCH(DMI_BIOS_VERSION, "A09"),
},
},
/* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
{
.callback = set_nouse_crs,
.ident = "Thinkpad SL510",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */
{
.callback = set_nouse_crs,
.ident = "Supermicro X8DTH",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"),
DMI_MATCH(DMI_BIOS_VERSION, "2.0a"),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
{
.callback = set_ignore_seg,
.ident = "HP xw9300",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
},
},
{}
};
void __init pci_acpi_crs_quirks(void)
{
int year = dmi_get_bios_year();
if (year >= 0 && year < 2008 && iomem_resource.end <= 0xffffffff)
pci_use_crs = false;
dmi_check_system(pci_crs_quirks);
/*
* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
* takes precedence over anything we figured out above.
*/
if (pci_probe & PCI_ROOT_NO_CRS)
pci_use_crs = false;
else if (pci_probe & PCI_USE__CRS)
pci_use_crs = true;
printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
"if necessary, use \"pci=%s\" and report a bug\n",
pci_use_crs ? "Using" : "Ignoring",
pci_use_crs ? "nocrs" : "use_crs");
}
#ifdef CONFIG_PCI_MMCONFIG
static int check_segment(u16 seg, struct device *dev, char *estr)
{
if (seg) {
dev_err(dev,
"%s can't access PCI configuration "
"space under this host bridge.\n",
estr);
return -EIO;
}
/*
* Failure in adding MMCFG information is not fatal,
* just can't access extended configuration space of
* devices under this host bridge.
*/
dev_warn(dev,
"%s can't access extended PCI configuration "
"space under this bridge.\n",
estr);
return 0;
}
static int setup_mcfg_map(struct acpi_pci_root_info *ci)
{
int result, seg;
struct pci_root_info *info;
struct acpi_pci_root *root = ci->root;
struct device *dev = &ci->bridge->dev;
info = container_of(ci, struct pci_root_info, common);
info->start_bus = (u8)root->secondary.start;
info->end_bus = (u8)root->secondary.end;
info->mcfg_added = false;
seg = info->sd.domain;
/* return success if MMCFG is not in use */
if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
return 0;
if (!(pci_probe & PCI_PROBE_MMCONF))
return check_segment(seg, dev, "MMCONFIG is disabled,");
result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
root->mcfg_addr);
if (result == 0) {
/* enable MMCFG if it hasn't been enabled yet */
if (raw_pci_ext_ops == NULL)
raw_pci_ext_ops = &pci_mmcfg;
info->mcfg_added = true;
} else if (result != -EEXIST)
return check_segment(seg, dev,
"fail to add MMCONFIG information,");
return 0;
}
static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
{
struct pci_root_info *info;
info = container_of(ci, struct pci_root_info, common);
if (info->mcfg_added) {
pci_mmconfig_delete(info->sd.domain,
info->start_bus, info->end_bus);
info->mcfg_added = false;
}
}
#else
static int setup_mcfg_map(struct acpi_pci_root_info *ci)
{
return 0;
}
static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
{
}
#endif
static int pci_acpi_root_get_node(struct acpi_pci_root *root)
{
int busnum = root->secondary.start;
struct acpi_device *device = root->device;
int node = acpi_get_node(device->handle);
if (node == NUMA_NO_NODE) {
node = x86_pci_root_bus_node(busnum);
if (node != 0 && node != NUMA_NO_NODE)
dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
node);
}
if (node != NUMA_NO_NODE && !node_online(node))
node = NUMA_NO_NODE;
return node;
}
static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci)
{
return setup_mcfg_map(ci);
}
static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
{
teardown_mcfg_map(ci);
kfree(container_of(ci, struct pci_root_info, common));
}
/*
* An IO port or MMIO resource assigned to a PCI host bridge may be
* consumed by the host bridge itself or available to its child
* bus/devices. The ACPI specification defines a bit (Producer/Consumer)
* to tell whether the resource is consumed by the host bridge itself,
* but firmware hasn't used that bit consistently, so we can't rely on it.
*
* On x86 and IA64 platforms, all IO port and MMIO resources are assumed
* to be available to child bus/devices except one special case:
* IO port [0xCF8-0xCFF] is consumed by the host bridge itself
* to access PCI configuration space.
*
* So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
*/
static bool resource_is_pcicfg_ioport(struct resource *res)
{
return (res->flags & IORESOURCE_IO) &&
res->start == 0xCF8 && res->end == 0xCFF;
}
static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
{
struct acpi_device *device = ci->bridge;
int busnum = ci->root->secondary.start;
struct resource_entry *entry, *tmp;
int status;
status = acpi_pci_probe_root_resources(ci);
if (pci_use_crs) {
resource_list_for_each_entry_safe(entry, tmp, &ci->resources)
if (resource_is_pcicfg_ioport(entry->res))
resource_list_destroy_entry(entry);
return status;
}
resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
dev_printk(KERN_DEBUG, &device->dev,
"host bridge window %pR (ignored)\n", entry->res);
resource_list_destroy_entry(entry);
}
x86_pci_root_bus_resources(busnum, &ci->resources);
return 0;
}
static struct acpi_pci_root_ops acpi_pci_root_ops = {
.pci_ops = &pci_root_ops,
.init_info = pci_acpi_root_init_info,
.release_info = pci_acpi_root_release_info,
.prepare_resources = pci_acpi_root_prepare_resources,
};
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
int domain = root->segment;
int busnum = root->secondary.start;
int node = pci_acpi_root_get_node(root);
struct pci_bus *bus;
if (pci_ignore_seg)
root->segment = domain = 0;
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (multiple domains not supported)\n",
domain, busnum);
return NULL;
}
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus has been scanned already, replace
* its bus->sysdata.
*/
struct pci_sysdata sd = {
.domain = domain,
.node = node,
.companion = root->device
};
memcpy(bus->sysdata, &sd, sizeof(sd));
} else {
struct pci_root_info *info;
info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
if (!info)
dev_err(&root->device->dev,
"pci_bus %04x:%02x: ignored (out of memory)\n",
domain, busnum);
else {
info->sd.domain = domain;
info->sd.node = node;
info->sd.companion = root->device;
bus = acpi_pci_root_create(root, &acpi_pci_root_ops,
&info->common, &info->sd);
}
}
/* After the PCI-E bus has been walked and all devices discovered,
* configure any settings of the fabric that might be necessary.
*/
if (bus) {
struct pci_bus *child;
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
return bus;
}
int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
{
/*
* We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
* here, pci_create_root_bus() has been called by someone else and
* sysdata is likely to be different from what we expect. Let it go in
* that case.
*/
if (!bridge->dev.parent) {
struct pci_sysdata *sd = bridge->bus->sysdata;
ACPI_COMPANION_SET(&bridge->dev, sd->companion);
}
return 0;
}
int __init pci_acpi_init(void)
{
struct pci_dev *dev = NULL;
if (acpi_noirq)
return -ENODEV;
printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
acpi_irq_penalty_init();
pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
x86_init.pci.init_irq = x86_init_noop;
if (pci_routeirq) {
/*
* PCI IRQ routing is set up by pci_enable_device(), but we
* also do it here in case there are still broken drivers that
* don't use pci_enable_device().
*/
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
for_each_pci_dev(dev)
acpi_pci_irq_enable(dev);
}
return 0;
}