usb: phy: Rename OTG FSM informative variables
Mark informative variables with suffix '_inf' to distinguish
them from other non-informative variables with the same name.
If such non-informative varialbes were missed, they are created.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 6495861..d13ccd5 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -1113,7 +1113,7 @@
break;
case SET_A_SUSPEND_REQ:
- fsl_otg_dev->fsm.a_suspend_req = arg;
+ fsl_otg_dev->fsm.a_suspend_req_inf = arg;
break;
case SET_A_BUS_DROP:
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
index 5e899ed..cb0367c 100644
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -99,7 +99,7 @@
case OTG_STATE_A_SUSPEND:
otg_del_timer(fsm, A_AIDL_BDIS);
fsm->a_aidl_bdis_tmout = 0;
- fsm->a_suspend_req = 0;
+ fsm->a_suspend_req_inf = 0;
break;
case OTG_STATE_A_PERIPHERAL:
otg_del_timer(fsm, A_BIDL_ADIS);
@@ -192,7 +192,7 @@
* When HNP is triggered while a_bus_req = 0, a_host will
* suspend too fast to complete a_set_b_hnp_en
*/
- if (!fsm->a_bus_req || fsm->a_suspend_req)
+ if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
otg_add_timer(fsm, A_WAIT_ENUM);
break;
case OTG_STATE_A_SUSPEND:
@@ -307,7 +307,7 @@
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
break;
case OTG_STATE_A_HOST:
- if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
+ if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
fsm->otg->host->b_hnp_enable)
otg_set_state(fsm, OTG_STATE_A_SUSPEND);
else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h
index a74e14a..4049e5c 100644
--- a/drivers/usb/phy/phy-fsm-usb.h
+++ b/drivers/usb/phy/phy-fsm-usb.h
@@ -54,9 +54,12 @@
/* OTG state machine according to the OTG spec */
struct otg_fsm {
/* Input */
+ int a_bus_drop;
+ int a_bus_req;
int a_bus_resume;
int a_bus_suspend;
int a_conn;
+ int b_bus_req;
int a_sess_vld;
int a_srp_det;
int a_vbus_vld;
@@ -72,6 +75,7 @@
int a_set_b_hnp_en;
int b_srp_done;
int b_hnp_enable;
+ int a_clr_err;
/* Timeout indicator for timers */
int a_wait_vrise_tmout;
@@ -82,11 +86,11 @@
int a_bidl_adis_tmout;
/* Informative variables */
- int a_bus_drop;
- int a_bus_req;
- int a_clr_err;
- int a_suspend_req;
- int b_bus_req;
+ int a_bus_drop_inf;
+ int a_bus_req_inf;
+ int a_clr_err_inf;
+ int a_suspend_req_inf;
+ int b_bus_req_inf;
/* Output */
int drv_vbus;
