ide: prefix messages from IDE PCI host drivers by driver name
Prefix messages from IDE PCI host drivers by driver name instead of marketed
chipset name (it is still possible to exactly identify the particular chipset
basing on driver messages).
As a bonus this provides nice code savings for some drivers:
text data bss dec hex filename
3826 112 8 3946 f6a drivers/ide/pci/amd74xx.o.before
2786 112 8 2906 b5a drivers/ide/pci/amd74xx.o.after
764 108 0 872 368 drivers/ide/pci/cs5520.o.before
680 108 0 788 314 drivers/ide/pci/cs5520.o.after
1680 112 4 1796 704 drivers/ide/pci/generic.o.before
1155 112 4 1271 4f7 drivers/ide/pci/generic.o.after
7128 792 0 7920 1ef0 drivers/ide/pci/hpt366.o.before
6984 792 0 7776 1e60 drivers/ide/pci/hpt366.o.after
2800 148 0 2948 b84 drivers/ide/pci/pdc202xx_new.o.before
2523 148 0 2671 a6f drivers/ide/pci/pdc202xx_new.o.after
2831 148 0 2979 ba3 drivers/ide/pci/pdc202xx_old.o.before
2683 148 0 2831 b0f drivers/ide/pci/pdc202xx_old.o.after
3776 112 4 3892 f34 drivers/ide/pci/piix.o.before
2804 112 4 2920 b68 drivers/ide/pci/piix.o.after
4693 116 0 4809 12c9 drivers/ide/pci/siimage.o.before
4600 116 0 4716 126c drivers/ide/pci/siimage.o.after
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 2532999..f6dc6c2 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -13,6 +13,8 @@
#include <asm/io.h>
+#define DRV_NAME "aec62xx"
+
struct chipset_bus_clock_list_entry {
u8 xfer_speed;
u8 chipset_settings;
@@ -180,8 +182,8 @@
};
static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "AEC6210",
+ { /* 0: AEC6210 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp850_port_ops,
@@ -192,8 +194,9 @@
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
- },{ /* 1 */
- .name = "AEC6260",
+ },
+ { /* 1: AEC6260 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
@@ -201,8 +204,9 @@
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
- },{ /* 2 */
- .name = "AEC6260R",
+ },
+ { /* 2: AEC6260R */
+ .name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp86x_port_ops,
@@ -211,8 +215,9 @@
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
- },{ /* 3 */
- .name = "AEC6280",
+ },
+ { /* 3: AEC6280 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
.port_ops = &atp86x_port_ops,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
@@ -220,8 +225,9 @@
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
- },{ /* 4 */
- .name = "AEC6280R",
+ },
+ { /* 4: AEC6280R */
+ .name = DRV_NAME,
.init_chipset = init_chipset_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.port_ops = &atp86x_port_ops,
@@ -268,7 +274,8 @@
unsigned long dma_base = pci_resource_start(dev, 4);
if (inb(dma_base + 2) & 0x10) {
- d.name = (idx == 4) ? "AEC6880R" : "AEC6880";
+ printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
+ "\n", pci_name(dev), (idx == 4) ? "R" : "");
d.udma_mask = ATA_UDMA6;
}
}
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index ac17150..a099c4d 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -38,6 +38,8 @@
#include <asm/io.h>
+#define DRV_NAME "alim15x3"
+
/*
* Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
* (this is DANGEROUS and could result in data corruption).
@@ -515,7 +517,7 @@
};
static const struct ide_port_info ali15x3_chipset __devinitdata = {
- .name = "ALI15X3",
+ .name = DRV_NAME,
.init_chipset = init_chipset_ali15x3,
.init_hwif = init_hwif_ali15x3,
.init_dma = init_dma_ali15x3,
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2b118f8..cbf78ed 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -21,6 +21,8 @@
#include <linux/init.h>
#include <linux/ide.h>
+#define DRV_NAME "amd74xx"
+
enum {
AMD_IDE_CONFIG = 0x41,
AMD_CABLE_DETECT = 0x42,
@@ -204,9 +206,9 @@
IDE_HFLAG_IO_32BIT | \
IDE_HFLAG_UNMASK_IRQS)
-#define DECLARE_AMD_DEV(name_str, swdma, udma) \
+#define DECLARE_AMD_DEV(swdma, udma) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
@@ -218,9 +220,9 @@
.udma_mask = udma, \
}
-#define DECLARE_NV_DEV(name_str, udma) \
+#define DECLARE_NV_DEV(udma) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
@@ -233,31 +235,15 @@
}
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
- /* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
- /* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
- /* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
- /* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
+ /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
+ /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
+ /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
+ /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
- /* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
- /* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
- /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
- /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
- /* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
- /* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
- /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
- /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
- /* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
- /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
- /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
- /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
- /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
- /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
- /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
- /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
- /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
+ /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
+ /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),
- /* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
+ /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -274,7 +260,7 @@
if (dev->revision <= 7)
d.swdma_mask = 0;
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- } else if (idx == 4) {
+ } else if (idx == 3) {
if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
d.udma_mask = ATA_UDMA5;
@@ -308,30 +294,30 @@
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 3 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 4 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 6 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 7 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 8 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 9 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 10 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 11 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 12 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 13 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 14 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 15 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 16 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 17 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 18 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 19 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 20 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 21 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 22 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 4c49c1b..332f08f 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -11,6 +11,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "atiixp"
+
#define ATIIXP_IDE_PIO_TIMING 0x40
#define ATIIXP_IDE_MDMA_TIMING 0x44
#define ATIIXP_IDE_PIO_CONTROL 0x48
@@ -137,16 +139,17 @@
};
static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
- { /* 0 */
- .name = "ATIIXP",
+ { /* 0: IXP200/300/400/700 */
+ .name = DRV_NAME,
.enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
.port_ops = &atiixp_port_ops,
.host_flags = IDE_HFLAG_LEGACY_IRQS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
- },{ /* 1 */
- .name = "SB600_PATA",
+ },
+ { /* 1: IXP600 */
+ .name = DRV_NAME,
.enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
.port_ops = &atiixp_port_ops,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS,
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 0a4d194..3d84deb 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -19,6 +19,8 @@
#include <asm/io.h>
+#define DRV_NAME "cmd64x"
+
#define CMD_DEBUG 0
#if CMD_DEBUG
@@ -407,8 +409,8 @@
};
static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "CMD643",
+ { /* 0: CMD643 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
@@ -418,8 +420,9 @@
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
- },{ /* 1 */
- .name = "CMD646",
+ },
+ { /* 1: CMD646 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.chipset = ide_cmd646,
@@ -429,8 +432,9 @@
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
- },{ /* 2 */
- .name = "CMD648",
+ },
+ { /* 2: CMD648 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
@@ -439,8 +443,9 @@
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
- },{ /* 3 */
- .name = "CMD649",
+ },
+ { /* 3: CMD649 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index b03d8ae..c0364b2 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -41,6 +41,8 @@
#include <linux/ide.h>
#include <linux/dma-mapping.h>
+#define DRV_NAME "cs5520"
+
struct pio_clocks
{
int address;
@@ -92,18 +94,11 @@
.set_dma_mode = cs5520_set_dma_mode,
};
-#define DECLARE_CS_DEV(name_str) \
- { \
- .name = name_str, \
- .port_ops = &cs5520_port_ops, \
- .host_flags = IDE_HFLAG_ISA_PORTS | \
- IDE_HFLAG_CS5520, \
- .pio_mask = ATA_PIO4, \
- }
-
-static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
- /* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+static const struct ide_port_info cyrix_chipset __devinitdata = {
+ .name = DRV_NAME,
+ .port_ops = &cs5520_port_ops,
+ .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
+ .pio_mask = ATA_PIO4,
};
/*
@@ -114,7 +109,7 @@
static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
+ const struct ide_port_info *d = &cyrix_chipset;
hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
ide_setup_pci_noise(dev, d);
@@ -128,7 +123,8 @@
}
pci_set_master(dev);
if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
+ printk(KERN_WARNING "%s: No suitable DMA available.\n",
+ d->name);
return -ENODEV;
}
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index dff345c7..5543c86 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -22,6 +22,8 @@
#include <asm/io.h>
+#define DRV_NAME "cs5530"
+
/*
* Here are the standard PIO mode 0-4 timings for each "format".
* Format-0 uses fast data reg timings, with slower command reg timings.
@@ -243,7 +245,7 @@
};
static const struct ide_port_info cs5530_chipset __devinitdata = {
- .name = "CS5530",
+ .name = DRV_NAME,
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
.port_ops = &cs5530_port_ops,
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index a730013..f7b50cd 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -26,6 +26,8 @@
#include <linux/pci.h>
#include <linux/ide.h>
+#define DRV_NAME "cs5535"
+
#define MSR_ATAC_BASE 0x51300000
#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
@@ -169,7 +171,7 @@
};
static const struct ide_port_info cs5535_chipset __devinitdata = {
- .name = "CS5535",
+ .name = DRV_NAME,
.port_ops = &cs5535_port_ops,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO4,
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 04f2688..41c7f33 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -48,6 +48,8 @@
#include <asm/io.h>
+#define DRV_NAME "cy82c693"
+
/* the current version */
#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
@@ -398,7 +400,7 @@
};
static const struct ide_port_info cy82c693_chipset __devinitdata = {
- .name = "CY82C693",
+ .name = DRV_NAME,
.init_chipset = init_chipset_cy82c693,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index e034e21..b07d4f4 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -27,6 +27,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "ide_pci_generic"
+
static int ide_generic_all; /* Set to claim all devices */
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
@@ -34,9 +36,9 @@
#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS)
-#define DECLARE_GENERIC_PCI_DEV(name_str, extra_flags) \
+#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
extra_flags, \
.swdma_mask = ATA_SWDMA2, \
@@ -45,10 +47,11 @@
}
static const struct ide_port_info generic_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_GENERIC_PCI_DEV("Unknown", 0),
+ /* 0: Unknown */
+ DECLARE_GENERIC_PCI_DEV(0),
- { /* 1 */
- .name = "NS87410",
+ { /* 1: NS87410 */
+ .name = DRV_NAME,
.enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} },
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
.swdma_mask = ATA_SWDMA2,
@@ -56,17 +59,15 @@
.udma_mask = ATA_UDMA6,
},
- /* 2 */ DECLARE_GENERIC_PCI_DEV("SAMURAI", 0),
- /* 3 */ DECLARE_GENERIC_PCI_DEV("HT6565", 0),
- /* 4 */ DECLARE_GENERIC_PCI_DEV("UM8673F", IDE_HFLAGS_UMC),
- /* 5 */ DECLARE_GENERIC_PCI_DEV("UM8886A", IDE_HFLAGS_UMC),
- /* 6 */ DECLARE_GENERIC_PCI_DEV("UM8886BF", IDE_HFLAGS_UMC),
- /* 7 */ DECLARE_GENERIC_PCI_DEV("HINT_IDE", 0),
- /* 8 */ DECLARE_GENERIC_PCI_DEV("VIA_IDE", IDE_HFLAG_NO_AUTODMA),
- /* 9 */ DECLARE_GENERIC_PCI_DEV("OPTI621V", IDE_HFLAG_NO_AUTODMA),
+ /* 2: SAMURAI / HT6565 / HINT_IDE */
+ DECLARE_GENERIC_PCI_DEV(0),
+ /* 3: UM8673F / UM8886A / UM8886BF */
+ DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC),
+ /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */
+ DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA),
- { /* 10 */
- .name = "VIA8237SATA",
+ { /* 5: VIA8237SATA */
+ .name = DRV_NAME,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
@@ -74,12 +75,8 @@
.udma_mask = ATA_UDMA6,
},
- /* 11 */ DECLARE_GENERIC_PCI_DEV("Piccolo0102", IDE_HFLAG_NO_AUTODMA),
- /* 12 */ DECLARE_GENERIC_PCI_DEV("Piccolo0103", IDE_HFLAG_NO_AUTODMA),
- /* 13 */ DECLARE_GENERIC_PCI_DEV("Piccolo0105", IDE_HFLAG_NO_AUTODMA),
-
- { /* 14 */
- .name = "Revolution",
+ { /* 6: Revolution */
+ .name = DRV_NAME,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
@@ -147,20 +144,20 @@
static const struct pci_device_id generic_pci_tbl[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), 1 },
{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), 2 },
- { PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 3 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 4 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 5 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 6 },
- { PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 7 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 8 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 9 },
+ { PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 2 },
+ { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 3 },
+ { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 3 },
+ { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 3 },
+ { PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 2 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 4 },
+ { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 4 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 10 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 5 },
#endif
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 11 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 12 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 13 },
- { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 14 },
+ { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 4 },
+ { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 4 },
+ { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 4 },
+ { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 6 },
/*
* Must come last. If you add entries adjust
* this table and generic_chipsets[] appropriately.
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index b52f833..baabb4c 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -33,6 +33,8 @@
#include <linux/init.h>
#include <linux/ide.h>
+#define DRV_NAME "hpt34x"
+
#define HPT343_DEBUG_DRIVE_INFO 0
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
@@ -126,15 +128,15 @@
IDE_HFLAG_NO_AUTODMA)
static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "HPT343",
+ { /* 0: HPT343 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_hpt34x,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
.pio_mask = ATA_PIO5,
},
- { /* 1 */
- .name = "HPT345",
+ { /* 1: HPT345 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_hpt34x,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index b8004c3..6a1c65c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -131,6 +131,8 @@
#include <asm/uaccess.h>
#include <asm/io.h>
+#define DRV_NAME "hpt366"
+
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
@@ -1362,7 +1364,7 @@
if (dev2->irq != dev->irq) {
/* FIXME: we need a core pci_set_interrupt() */
dev2->irq = dev->irq;
- printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+ printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt "
"fixed\n", pci_name(dev2));
}
}
@@ -1398,7 +1400,7 @@
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
if (pin1 != pin2 && dev->irq == dev2->irq) {
- printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+ printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, "
"pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
return 1;
}
@@ -1454,8 +1456,8 @@
};
static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "HPT36x",
+ { /* 0: HPT36x */
+ .name = DRV_NAME,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
@@ -1471,53 +1473,9 @@
.host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
- },{ /* 1 */
- .name = "HPT372A",
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },{ /* 2 */
- .name = "HPT302",
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },{ /* 3 */
- .name = "HPT371",
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },{ /* 4 */
- .name = "HPT374",
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .udma_mask = ATA_UDMA5,
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },{ /* 5 */
- .name = "HPT372N",
+ },
+ { /* 1: HPT3xx */
+ .name = DRV_NAME,
.init_chipset = init_chipset_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
@@ -1583,9 +1541,10 @@
break;
}
- d = hpt366_chipsets[idx];
+ printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name);
- d.name = info->chip_name;
+ d = hpt366_chipsets[min_t(u8, idx, 1)];
+
d.udma_mask = info->udma_mask;
/* fixup ->dma_ops for HPT370/HPT370A */
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 451b87f..6eba8f1 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -14,6 +14,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "it8213"
+
/**
* it8213_set_pio_mode - set host controller for PIO mode
* @drive: drive
@@ -156,7 +158,7 @@
};
static const struct ide_port_info it8213_chipset __devinitdata = {
- .name = "IT8213",
+ .name = DRV_NAME,
.enablebits = { {0x41, 0x80, 0x80} },
.port_ops = &it8213_port_ops,
.host_flags = IDE_HFLAG_SINGLE,
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index a3d8959..7417335 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -67,6 +67,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "it821x"
+
struct it821x_dev
{
unsigned int smart:1, /* Are we in smart raid mode */
@@ -569,7 +571,7 @@
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
if (idev->smart == 0)
- printk(KERN_WARNING "it821x %s: revision 0x10, "
+ printk(KERN_WARNING DRV_NAME " %s: revision 0x10, "
"workarounds activated\n", pci_name(dev));
}
@@ -610,12 +612,12 @@
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
- printk(KERN_INFO "it821x %s: forcing bypass mode\n",
+ printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n",
pci_name(dev));
it8212_disable_raid(dev);
}
pci_read_config_byte(dev, 0x50, &conf);
- printk(KERN_INFO "it821x %s: controller in %s mode\n",
+ printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n",
pci_name(dev), mode[conf & 1]);
return 0;
}
@@ -629,7 +631,7 @@
};
static const struct ide_port_info it821x_chipset __devinitdata = {
- .name = "IT821X",
+ .name = DRV_NAME,
.init_chipset = init_chipset_it821x,
.init_hwif = init_hwif_it821x,
.port_ops = &it821x_port_ops,
@@ -652,7 +654,7 @@
itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
if (itdevs == NULL) {
- printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev));
+ printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev));
return -ENOMEM;
}
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 39e221b..545b6e1 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -12,6 +12,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "jmicron"
+
typedef enum {
PORT_PATA0 = 0,
PORT_PATA1 = 1,
@@ -102,7 +104,7 @@
};
static const struct ide_port_info jmicron_chipset __devinitdata = {
- .name = "JMB",
+ .name = DRV_NAME,
.enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
.port_ops = &jmicron_port_ops,
.pio_mask = ATA_PIO5,
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index afcc742..ffefcd1 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -19,6 +19,8 @@
#include <asm/io.h>
+#define DRV_NAME "ns87415"
+
#ifdef CONFIG_SUPERIO
/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
* Unfortunately, it's built-in on all Astro-based PA-RISC workstations
@@ -305,7 +307,7 @@
};
static const struct ide_port_info ns87415_chipset __devinitdata = {
- .name = "NS87415",
+ .name = DRV_NAME,
.init_hwif = init_hwif_ns87415,
.port_ops = &ns87415_port_ops,
.dma_ops = &ns87415_dma_ops,
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 4895f2f..e28e672 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -90,6 +90,8 @@
#include <asm/io.h>
+#define DRV_NAME "opti621"
+
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
@@ -200,7 +202,7 @@
};
static const struct ide_port_info opti621_chipset __devinitdata = {
- .name = "OPTI621/X",
+ .name = DRV_NAME,
.enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
.port_ops = &opti621_port_ops,
.host_flags = IDE_HFLAG_NO_DMA,
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 4c2b669..1f67919 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -31,6 +31,8 @@
#include <asm/pci-bridge.h>
#endif
+#define DRV_NAME "pdc202xx_new"
+
#undef DEBUG
#ifdef DEBUG
@@ -458,7 +460,7 @@
if (dev2->irq != dev->irq) {
dev2->irq = dev->irq;
- printk(KERN_INFO "PDC20270 %s: PCI config space "
+ printk(KERN_INFO DRV_NAME " %s: PCI config space "
"interrupt fixed\n", pci_name(dev));
}
@@ -476,9 +478,9 @@
.cable_detect = pdcnew_cable_detect,
};
-#define DECLARE_PDCNEW_DEV(name_str, udma) \
+#define DECLARE_PDCNEW_DEV(udma) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_pdcnew, \
.port_ops = &pdcnew_port_ops, \
.host_flags = IDE_HFLAG_POST_SET_MODE | \
@@ -490,13 +492,8 @@
}
static const struct ide_port_info pdcnew_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_PDCNEW_DEV("PDC20268", ATA_UDMA5),
- /* 1 */ DECLARE_PDCNEW_DEV("PDC20269", ATA_UDMA6),
- /* 2 */ DECLARE_PDCNEW_DEV("PDC20270", ATA_UDMA5),
- /* 3 */ DECLARE_PDCNEW_DEV("PDC20271", ATA_UDMA6),
- /* 4 */ DECLARE_PDCNEW_DEV("PDC20275", ATA_UDMA6),
- /* 5 */ DECLARE_PDCNEW_DEV("PDC20276", ATA_UDMA6),
- /* 6 */ DECLARE_PDCNEW_DEV("PDC20277", ATA_UDMA6),
+ /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5),
+ /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6),
};
/**
@@ -510,13 +507,10 @@
static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- const struct ide_port_info *d;
+ const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
struct pci_dev *bridge = dev->bus->self;
- u8 idx = id->driver_data;
- d = &pdcnew_chipsets[idx];
-
- if (idx == 2 && bridge &&
+ if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge &&
bridge->vendor == PCI_VENDOR_ID_DEC &&
bridge->device == PCI_DEVICE_ID_DEC_21150) {
struct pci_dev *dev2;
@@ -534,11 +528,11 @@
}
}
- if (idx == 5 && bridge &&
+ if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge &&
bridge->vendor == PCI_VENDOR_ID_INTEL &&
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller,"
+ printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller,"
" skipping\n", pci_name(dev));
return -ENODEV;
}
@@ -558,11 +552,11 @@
static const struct pci_device_id pdc202new_pci_tbl[] = {
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 2 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 3 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 4 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 5 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 6 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 5cb2731..da92d12 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -20,6 +20,8 @@
#include <asm/io.h>
+#define DRV_NAME "pdc202xx_old"
+
#define PDC202XX_DEBUG_DRIVE_INFO 0
static const char *pdc_quirk_drives[] = {
@@ -350,9 +352,9 @@
.dma_timeout = pdc202xx_dma_timeout,
};
-#define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
+#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_pdc202xx, \
.port_ops = &pdc2026x_port_ops, \
.dma_ops = &pdc2026x_dma_ops, \
@@ -363,8 +365,8 @@
}
static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "PDC20246",
+ { /* 0: PDC20246 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_pdc202xx,
.port_ops = &pdc20246_port_ops,
.dma_ops = &pdc20246_dma_ops,
@@ -374,10 +376,10 @@
.udma_mask = ATA_UDMA2,
},
- /* 1 */ DECLARE_PDC2026X_DEV("PDC20262", ATA_UDMA4, 0),
- /* 2 */ DECLARE_PDC2026X_DEV("PDC20263", ATA_UDMA4, 0),
- /* 3 */ DECLARE_PDC2026X_DEV("PDC20265", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
- /* 4 */ DECLARE_PDC2026X_DEV("PDC20267", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
+ /* 1: PDC2026{2,3} */
+ DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
+ /* 2: PDC2026{5,7} */
+ DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
};
/**
@@ -396,17 +398,17 @@
d = &pdc202xx_chipsets[idx];
- if (idx < 3)
+ if (idx < 2)
pdc202ata4_fixup_irq(dev, d->name);
- if (idx == 3) {
+ if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) {
struct pci_dev *bridge = dev->bus->self;
if (bridge &&
bridge->vendor == PCI_VENDOR_ID_INTEL &&
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO "pdc202xx_old %s: skipping Promise "
+ printk(KERN_INFO DRV_NAME " %s: skipping Promise "
"PDC20265 attached to I2O RAID controller\n",
pci_name(dev));
return -ENODEV;
@@ -419,9 +421,9 @@
static const struct pci_device_id pdc202xx_pci_tbl[] = {
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 2 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 3 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 4 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
+ { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index c16b1ab..9eb411f5c 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -54,6 +54,8 @@
#include <asm/io.h>
+#define DRV_NAME "piix"
+
static int no_piix_dma;
/**
@@ -314,9 +316,9 @@
#define IDE_HFLAGS_PIIX 0
#endif
-#define DECLARE_PIIX_DEV(name_str, udma) \
+#define DECLARE_PIIX_DEV(udma) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_hwif = init_hwif_piix, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
.port_ops = &piix_port_ops, \
@@ -327,9 +329,9 @@
.udma_mask = udma, \
}
-#define DECLARE_ICH_DEV(name_str, udma) \
+#define DECLARE_ICH_DEV(udma) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_ich, \
.init_hwif = init_hwif_ich, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
@@ -342,45 +344,31 @@
}
static const struct ide_port_info piix_pci_info[] __devinitdata = {
- /* 0 */ DECLARE_PIIX_DEV("PIIXa", 0x00), /* no udma */
- /* 1 */ DECLARE_PIIX_DEV("PIIXb", 0x00), /* no udma */
-
- /* 2 */
+ /* 0: MPIIX */
{ /*
* MPIIX actually has only a single IDE channel mapped to
* the primary or secondary ports depending on the value
* of the bit 14 of the IDETIM register at offset 0x6c
*/
- .name = "MPIIX",
+ .name = DRV_NAME,
.enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
.host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
IDE_HFLAGS_PIIX,
.pio_mask = ATA_PIO4,
/* This is a painful system best to let it self tune for now */
},
-
- /* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */
- /* 4 */ DECLARE_PIIX_DEV("PIIX4", ATA_UDMA2),
- /* 5 */ DECLARE_ICH_DEV("ICH0", ATA_UDMA2),
- /* 6 */ DECLARE_PIIX_DEV("PIIX4", ATA_UDMA2),
- /* 7 */ DECLARE_ICH_DEV("ICH", ATA_UDMA4),
- /* 8 */ DECLARE_PIIX_DEV("PIIX4", ATA_UDMA4),
- /* 9 */ DECLARE_PIIX_DEV("PIIX4", ATA_UDMA2),
- /* 10 */ DECLARE_ICH_DEV("ICH2", ATA_UDMA5),
- /* 11 */ DECLARE_ICH_DEV("ICH2M", ATA_UDMA5),
- /* 12 */ DECLARE_ICH_DEV("ICH3M", ATA_UDMA5),
- /* 13 */ DECLARE_ICH_DEV("ICH3", ATA_UDMA5),
- /* 14 */ DECLARE_ICH_DEV("ICH4", ATA_UDMA5),
- /* 15 */ DECLARE_ICH_DEV("ICH5", ATA_UDMA5),
- /* 16 */ DECLARE_ICH_DEV("C-ICH", ATA_UDMA5),
- /* 17 */ DECLARE_ICH_DEV("ICH4", ATA_UDMA5),
- /* 18 */ DECLARE_ICH_DEV("ICH5-SATA", ATA_UDMA5),
- /* 19 */ DECLARE_ICH_DEV("ICH5", ATA_UDMA5),
- /* 20 */ DECLARE_ICH_DEV("ICH6", ATA_UDMA5),
- /* 21 */ DECLARE_ICH_DEV("ICH7", ATA_UDMA5),
- /* 22 */ DECLARE_ICH_DEV("ICH4", ATA_UDMA5),
- /* 23 */ DECLARE_ICH_DEV("ESB2", ATA_UDMA5),
- /* 24 */ DECLARE_ICH_DEV("ICH8M", ATA_UDMA5),
+ /* 1: PIIXa/PIIXb/PIIX3 */
+ DECLARE_PIIX_DEV(0x00), /* no udma */
+ /* 2: PIIX4 */
+ DECLARE_PIIX_DEV(ATA_UDMA2),
+ /* 3: ICH0 */
+ DECLARE_ICH_DEV(ATA_UDMA2),
+ /* 4: ICH */
+ DECLARE_ICH_DEV(ATA_UDMA4),
+ /* 5: PIIX4 */
+ DECLARE_PIIX_DEV(ATA_UDMA4),
+ /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+ DECLARE_ICH_DEV(ATA_UDMA5),
};
/**
@@ -421,39 +409,39 @@
no_piix_dma = 2;
}
if(no_piix_dma)
- printk(KERN_WARNING "piix: 450NX errata present, disabling IDE DMA.\n");
+ printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
if(no_piix_dma == 2)
- printk(KERN_WARNING "piix: A BIOS update may resolve this.\n");
+ printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
}
static const struct pci_device_id piix_pci_tbl[] = {
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 0 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 3 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 4 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 5 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 7 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 8 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 9 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 10 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 11 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 12 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 13 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 14 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 15 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 16 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 17 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 1 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 0 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 1 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 2 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 3 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 2 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 4 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 5 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 2 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 18 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 6 },
#endif
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 19 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 20 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 21 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 22 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 23 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 24 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index f7a3b9a..8d11ee8 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -21,6 +21,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "rz1000"
+
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -40,7 +42,7 @@
}
static const struct ide_port_info rz1000_chipset __devinitdata = {
- .name = "RZ100x",
+ .name = DRV_NAME,
.init_hwif = init_hwif_rz1000,
.chipset = ide_rz1000,
.host_flags = IDE_HFLAG_NO_DMA,
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 6509560..8efaed1 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -22,6 +22,8 @@
#include <asm/io.h>
+#define DRV_NAME "sc1200"
+
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
#define SC1200_REV_B3 0x02
@@ -291,7 +293,7 @@
};
static const struct ide_port_info sc1200_chipset __devinitdata = {
- .name = "SC1200",
+ .name = DRV_NAME,
.port_ops = &sc1200_port_ops,
.dma_ops = &sc1200_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 1106ff4..e26bc83 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -38,6 +38,8 @@
#include <asm/io.h>
+#define DRV_NAME "serverworks"
+
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -353,40 +355,44 @@
#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS
static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "SvrWks OSB4",
+ { /* 0: OSB4 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_svwks,
.port_ops = &osb4_port_ops,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* UDMA is problematic on OSB4 */
- },{ /* 1 */
- .name = "SvrWks CSB5",
+ },
+ { /* 1: CSB5 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_svwks,
.port_ops = &svwks_port_ops,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
- },{ /* 2 */
- .name = "SvrWks CSB6",
+ },
+ { /* 2: CSB6 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_svwks,
.port_ops = &svwks_port_ops,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
- },{ /* 3 */
- .name = "SvrWks CSB6",
+ },
+ { /* 3: CSB6-2 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_svwks,
.port_ops = &svwks_port_ops,
.host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
- },{ /* 4 */
- .name = "SvrWks HT1000",
+ },
+ { /* 4: HT1000 */
+ .name = DRV_NAME,
.init_chipset = init_chipset_svwks,
.port_ops = &svwks_port_ops,
.host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index fc29f1c..572b479 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -44,6 +44,8 @@
#include <linux/init.h>
#include <linux/io.h>
+#define DRV_NAME "siimage"
+
/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
@@ -717,9 +719,9 @@
.dma_lost_irq = ide_dma_lost_irq,
};
-#define DECLARE_SII_DEV(name_str, p_ops) \
+#define DECLARE_SII_DEV(p_ops) \
{ \
- .name = name_str, \
+ .name = DRV_NAME, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.port_ops = p_ops, \
@@ -730,9 +732,8 @@
}
static const struct ide_port_info siimage_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops),
- /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops),
- /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops)
+ /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
+ /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
};
/**
@@ -761,7 +762,7 @@
static int first = 1;
if (first) {
- printk(KERN_INFO "siimage: For full SATA support you "
+ printk(KERN_INFO DRV_NAME ": For full SATA support you "
"should use the libata sata_sil module.\n");
first = 0;
}
@@ -780,7 +781,7 @@
* seem to get terminally confused in the PCI spaces.
*/
if (!request_mem_region(bar5, barsize, d.name)) {
- printk(KERN_WARNING "siimage %s: MMIO ports not "
+ printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
"available\n", pci_name(dev));
} else {
ioaddr = ioremap(bar5, barsize);
@@ -823,7 +824,7 @@
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 2 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
#endif
{ 0, },
};
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 518d8ab..6fcb46c 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -52,6 +52,8 @@
#include <linux/init.h>
#include <linux/ide.h>
+#define DRV_NAME "sis5513"
+
/* registers layout and init values are chipset family dependant */
#define ATA_16 0x01
@@ -380,7 +382,7 @@
}
pci_dev_put(host);
- printk(KERN_INFO "SIS5513 %s: %s %s controller\n",
+ printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
pci_name(dev), SiSHostChipInfo[i].name,
chipset_capability[chipset_family]);
}
@@ -397,7 +399,7 @@
pci_write_config_dword(dev, 0x54, idemisc);
if (trueid == 0x5518) {
- printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
+ printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
pci_name(dev));
chipset_family = ATA_133;
@@ -407,7 +409,7 @@
*/
if ((idemisc & 0x40000000) == 0) {
pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n",
+ printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
pci_name(dev));
}
}
@@ -432,11 +434,11 @@
pci_dev_put(lpc_bridge);
if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
- printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
+ printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
pci_name(dev));
chipset_family = ATA_133a;
} else {
- printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
+ printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
pci_name(dev));
chipset_family = ATA_100;
}
@@ -560,7 +562,7 @@
};
static const struct ide_port_info sis5513_chipset __devinitdata = {
- .name = "SIS5513",
+ .name = DRV_NAME,
.init_chipset = init_chipset_sis5513,
.enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA,
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 72899f8..fa720db 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -23,6 +23,8 @@
#include <asm/io.h>
+#define DRV_NAME "sl82c105"
+
#undef DEBUG
#ifdef DEBUG
@@ -301,7 +303,7 @@
};
static const struct ide_port_info sl82c105_chipset __devinitdata = {
- .name = "W82C105",
+ .name = DRV_NAME,
.init_chipset = init_chipset_sl82c105,
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.port_ops = &sl82c105_port_ops,
@@ -328,7 +330,7 @@
* Never ever EVER under any circumstances enable
* DMA when the bridge is this old.
*/
- printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge "
+ printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge "
"revision %d, BM-DMA disabled\n", rev);
d.dma_ops = NULL;
d.mwdma_mask = 0;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index fee5ebe..13d1fa4 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -15,6 +15,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "slc90e66"
+
static DEFINE_SPINLOCK(slc90e66_lock);
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -132,7 +134,7 @@
};
static const struct ide_port_info slc90e66_chipset __devinitdata = {
- .name = "SLC90E66",
+ .name = DRV_NAME,
.enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
.port_ops = &slc90e66_port_ops,
.host_flags = IDE_HFLAG_LEGACY_IRQS,
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 102cd7c..b1cb8a9 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -11,7 +11,7 @@
#include <linux/pci.h>
#include <linux/ide.h>
-#define DRV_NAME "TC86C001"
+#define DRV_NAME "tc86c001"
static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
{
@@ -193,7 +193,7 @@
};
static const struct ide_port_info tc86c001_chipset __devinitdata = {
- .name = "TC86C001",
+ .name = DRV_NAME,
.init_hwif = init_hwif_tc86c001,
.port_ops = &tc86c001_port_ops,
.dma_ops = &tc86c001_dma_ops,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 78e24ac..b77ec35 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -33,6 +33,8 @@
#include <linux/ide.h>
#include <linux/init.h>
+#define DRV_NAME "triflex"
+
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -93,7 +95,7 @@
};
static const struct ide_port_info triflex_device __devinitdata = {
- .name = "TRIFLEX",
+ .name = DRV_NAME,
.enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
.port_ops = &triflex_port_ops,
.pio_mask = ATA_PIO4,
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 7bda5ed..fd28b49 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -141,6 +141,8 @@
#include <asm/io.h>
+#define DRV_NAME "trm290"
+
static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -245,10 +247,10 @@
u8 reg = 0;
if ((dev->class & 5) && cfg_base)
- printk(KERN_INFO "TRM290 %s: chip", pci_name(dev));
+ printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev));
else {
cfg_base = 0x3df0;
- printk(KERN_INFO "TRM290 %s: using default", pci_name(dev));
+ printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev));
}
printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
hwif->config_data = cfg_base;
@@ -325,7 +327,7 @@
};
static const struct ide_port_info trm290_chipset __devinitdata = {
- .name = "TRM290",
+ .name = DRV_NAME,
.init_hwif = init_hwif_trm290,
.chipset = ide_trm290,
.port_ops = &trm290_port_ops,
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 23332556..170e058 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -35,6 +35,8 @@
#include <asm/processor.h>
#endif
+#define DRV_NAME "via82cxxx"
+
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
#define VIA_FIFO_CONFIG 0x43
@@ -373,7 +375,7 @@
};
static const struct ide_port_info via82cxxx_chipset __devinitdata = {
- .name = "VP_IDE",
+ .name = DRV_NAME,
.init_chipset = init_chipset_via82cxxx,
.enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
.port_ops = &via_port_ops,
@@ -401,7 +403,7 @@
*/
via_config = via_config_find(&isa);
if (!via_config->id) {
- printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n",
+ printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
pci_name(dev));
return -ENODEV;
}
@@ -409,7 +411,7 @@
/*
* Print the boot message.
*/
- printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+ printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
pci_name(dev), via_config->name, isa->revision,
via_config->udma_mask ? "U" : "MW",
via_dma[via_config->udma_mask ?
@@ -429,9 +431,9 @@
}
if (via_clock < 20000 || via_clock > 50000) {
- printk(KERN_WARNING "VP_IDE: User given PCI clock speed "
+ printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
"impossible (%d), using 33 MHz instead.\n", via_clock);
- printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want "
+ printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
"to assume 80-wire cable.\n");
via_clock = 33333;
}
@@ -453,7 +455,8 @@
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
- printk(KERN_ERR "VP_IDE %s: out of memory :(\n", pci_name(dev));
+ printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
+ pci_name(dev));
return -ENOMEM;
}
