blob: 2551ed16b7423b1d1706fc3a2aeefc4fb0b9fe41 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
# Greybus core
greybus-y := core.o \
debugfs.o \
hd.o \
manifest.o \
module.o \
interface.o \
bundle.o \
connection.o \
control.o \
svc.o \
svc_watchdog.o \
operation.o
obj-$(CONFIG_GREYBUS) += greybus.o
# needed for trace events
ccflags-y += -I$(src)
# Greybus Host controller drivers
gb-es2-y := es2.o
obj-$(CONFIG_GREYBUS_ES2) += gb-es2.o
# Greybus class drivers
gb-bootrom-y := bootrom.o
gb-camera-y := camera.o
gb-firmware-y := fw-core.o fw-download.o fw-management.o authentication.o
gb-spilib-y := spilib.o
gb-hid-y := hid.o
gb-light-y := light.o
gb-log-y := log.o
gb-loopback-y := loopback.o
gb-power-supply-y := power_supply.o
gb-raw-y := raw.o
gb-vibrator-y := vibrator.o
obj-$(CONFIG_GREYBUS_BOOTROM) += gb-bootrom.o
obj-$(CONFIG_GREYBUS_CAMERA) += gb-camera.o
obj-$(CONFIG_GREYBUS_FIRMWARE) += gb-firmware.o gb-spilib.o
obj-$(CONFIG_GREYBUS_HID) += gb-hid.o
obj-$(CONFIG_GREYBUS_LIGHT) += gb-light.o
obj-$(CONFIG_GREYBUS_LOG) += gb-log.o
obj-$(CONFIG_GREYBUS_LOOPBACK) += gb-loopback.o
obj-$(CONFIG_GREYBUS_POWER) += gb-power-supply.o
obj-$(CONFIG_GREYBUS_RAW) += gb-raw.o
obj-$(CONFIG_GREYBUS_VIBRATOR) += gb-vibrator.o
# Greybus Audio is a bunch of modules
gb-audio-module-y := audio_module.o audio_topology.o
gb-audio-codec-y := audio_codec.o
gb-audio-gb-y := audio_gb.o
gb-audio-apbridgea-y := audio_apbridgea.o
gb-audio-manager-y := audio_manager.o audio_manager_module.o
# Greybus Audio sysfs helpers can be useful when debugging
#GB_AUDIO_MANAGER_SYSFS ?= true
#ifeq ($(GB_AUDIO_MANAGER_SYSFS),true)
#gb-audio-manager-y += audio_manager_sysfs.o
#ccflags-y += -DGB_AUDIO_MANAGER_SYSFS
#endif
obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-codec.o
obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-module.o
obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-gb.o
obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-apbridgea.o
obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-manager.o
# Greybus Bridged PHY drivers
gb-gbphy-y := gbphy.o
gb-gpio-y := gpio.o
gb-i2c-y := i2c.o
gb-pwm-y := pwm.o
gb-sdio-y := sdio.o
gb-spi-y := spi.o
gb-uart-y := uart.o
gb-usb-y := usb.o
obj-$(CONFIG_GREYBUS_BRIDGED_PHY) += gb-gbphy.o
obj-$(CONFIG_GREYBUS_GPIO) += gb-gpio.o
obj-$(CONFIG_GREYBUS_I2C) += gb-i2c.o
obj-$(CONFIG_GREYBUS_PWM) += gb-pwm.o
obj-$(CONFIG_GREYBUS_SDIO) += gb-sdio.o
obj-$(CONFIG_GREYBUS_SPI) += gb-spi.o gb-spilib.o
obj-$(CONFIG_GREYBUS_UART) += gb-uart.o
obj-$(CONFIG_GREYBUS_USB) += gb-usb.o
# Greybus Platform driver
gb-arche-y := arche-platform.o arche-apb-ctrl.o
obj-$(CONFIG_GREYBUS_ARCHE) += gb-arche.o