diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 98eaac9..e7abde1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -64,3372 +64,6 @@
 	return false;
 }
 
-struct init_tbl_entry {
-	char *name;
-	uint8_t id;
-	/* Return:
-	 *  > 0: success, length of opcode
-	 *    0: success, but abort further parsing of table (INIT_DONE etc)
-	 *  < 0: failure, table parsing will be aborted
-	 */
-	int (*handler)(struct nvbios *, uint16_t, struct init_exec *);
-};
-
-static int parse_init_table(struct nvbios *, uint16_t, struct init_exec *);
-
-#define MACRO_INDEX_SIZE	2
-#define MACRO_SIZE		8
-#define CONDITION_SIZE		12
-#define IO_FLAG_CONDITION_SIZE	9
-#define IO_CONDITION_SIZE	5
-#define MEM_INIT_SIZE		66
-
-static void still_alive(void)
-{
-#if 0
-	sync();
-	mdelay(2);
-#endif
-}
-
-static uint32_t
-munge_reg(struct nvbios *bios, uint32_t reg)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	struct dcb_entry *dcbent = bios->display.output;
-
-	if (dev_priv->card_type < NV_50)
-		return reg;
-
-	if (reg & 0x80000000) {
-		BUG_ON(bios->display.crtc < 0);
-		reg += bios->display.crtc * 0x800;
-	}
-
-	if (reg & 0x40000000) {
-		BUG_ON(!dcbent);
-
-		reg += (ffs(dcbent->or) - 1) * 0x800;
-		if ((reg & 0x20000000) && !(dcbent->sorconf.link & 1))
-			reg += 0x00000080;
-	}
-
-	reg &= ~0xe0000000;
-	return reg;
-}
-
-static int
-valid_reg(struct nvbios *bios, uint32_t reg)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	struct drm_device *dev = bios->dev;
-
-	/* C51 has misaligned regs on purpose. Marvellous */
-	if (reg & 0x2 ||
-	    (reg & 0x1 && dev_priv->vbios.chip_version != 0x51))
-		NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
-
-	/* warn on C51 regs that haven't been verified accessible in tracing */
-	if (reg & 0x1 && dev_priv->vbios.chip_version == 0x51 &&
-	    reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
-		NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
-			reg);
-
-	if (reg >= (8*1024*1024)) {
-		NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
-		return 0;
-	}
-
-	return 1;
-}
-
-static bool
-valid_idx_port(struct nvbios *bios, uint16_t port)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	struct drm_device *dev = bios->dev;
-
-	/*
-	 * If adding more ports here, the read/write functions below will need
-	 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
-	 * used for the port in question
-	 */
-	if (dev_priv->card_type < NV_50) {
-		if (port == NV_CIO_CRX__COLOR)
-			return true;
-		if (port == NV_VIO_SRX)
-			return true;
-	} else {
-		if (port == NV_CIO_CRX__COLOR)
-			return true;
-	}
-
-	NV_ERROR(dev, "========== unknown indexed io port 0x%04X ==========\n",
-		 port);
-
-	return false;
-}
-
-static bool
-valid_port(struct nvbios *bios, uint16_t port)
-{
-	struct drm_device *dev = bios->dev;
-
-	/*
-	 * If adding more ports here, the read/write functions below will need
-	 * updating so that the correct mmio range (PRMCIO, PRMDIO, PRMVIO) is
-	 * used for the port in question
-	 */
-	if (port == NV_VIO_VSE2)
-		return true;
-
-	NV_ERROR(dev, "========== unknown io port 0x%04X ==========\n", port);
-
-	return false;
-}
-
-static uint32_t
-bios_rd32(struct nvbios *bios, uint32_t reg)
-{
-	uint32_t data;
-
-	reg = munge_reg(bios, reg);
-	if (!valid_reg(bios, reg))
-		return 0;
-
-	/*
-	 * C51 sometimes uses regs with bit0 set in the address. For these
-	 * cases there should exist a translation in a BIOS table to an IO
-	 * port address which the BIOS uses for accessing the reg
-	 *
-	 * These only seem to appear for the power control regs to a flat panel,
-	 * and the GPIO regs at 0x60081*.  In C51 mmio traces the normal regs
-	 * for 0x1308 and 0x1310 are used - hence the mask below.  An S3
-	 * suspend-resume mmio trace from a C51 will be required to see if this
-	 * is true for the power microcode in 0x14.., or whether the direct IO
-	 * port access method is needed
-	 */
-	if (reg & 0x1)
-		reg &= ~0x1;
-
-	data = nv_rd32(bios->dev, reg);
-
-	BIOSLOG(bios, "	Read:  Reg: 0x%08X, Data: 0x%08X\n", reg, data);
-
-	return data;
-}
-
-static void
-bios_wr32(struct nvbios *bios, uint32_t reg, uint32_t data)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-
-	reg = munge_reg(bios, reg);
-	if (!valid_reg(bios, reg))
-		return;
-
-	/* see note in bios_rd32 */
-	if (reg & 0x1)
-		reg &= 0xfffffffe;
-
-	LOG_OLD_VALUE(bios_rd32(bios, reg));
-	BIOSLOG(bios, "	Write: Reg: 0x%08X, Data: 0x%08X\n", reg, data);
-
-	if (dev_priv->vbios.execute) {
-		still_alive();
-		nv_wr32(bios->dev, reg, data);
-	}
-}
-
-static uint8_t
-bios_idxprt_rd(struct nvbios *bios, uint16_t port, uint8_t index)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	struct drm_device *dev = bios->dev;
-	uint8_t data;
-
-	if (!valid_idx_port(bios, port))
-		return 0;
-
-	if (dev_priv->card_type < NV_50) {
-		if (port == NV_VIO_SRX)
-			data = NVReadVgaSeq(dev, bios->state.crtchead, index);
-		else	/* assume NV_CIO_CRX__COLOR */
-			data = NVReadVgaCrtc(dev, bios->state.crtchead, index);
-	} else {
-		uint32_t data32;
-
-		data32 = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
-		data = (data32 >> ((index & 3) << 3)) & 0xff;
-	}
-
-	BIOSLOG(bios, "	Indexed IO read:  Port: 0x%04X, Index: 0x%02X, "
-		      "Head: 0x%02X, Data: 0x%02X\n",
-		port, index, bios->state.crtchead, data);
-	return data;
-}
-
-static void
-bios_idxprt_wr(struct nvbios *bios, uint16_t port, uint8_t index, uint8_t data)
-{
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	struct drm_device *dev = bios->dev;
-
-	if (!valid_idx_port(bios, port))
-		return;
-
-	/*
-	 * The current head is maintained in the nvbios member  state.crtchead.
-	 * We trap changes to CR44 and update the head variable and hence the
-	 * register set written.
-	 * As CR44 only exists on CRTC0, we update crtchead to head0 in advance
-	 * of the write, and to head1 after the write
-	 */
-	if (port == NV_CIO_CRX__COLOR && index == NV_CIO_CRE_44 &&
-	    data != NV_CIO_CRE_44_HEADB)
-		bios->state.crtchead = 0;
-
-	LOG_OLD_VALUE(bios_idxprt_rd(bios, port, index));
-	BIOSLOG(bios, "	Indexed IO write: Port: 0x%04X, Index: 0x%02X, "
-		      "Head: 0x%02X, Data: 0x%02X\n",
-		port, index, bios->state.crtchead, data);
-
-	if (bios->execute && dev_priv->card_type < NV_50) {
-		still_alive();
-		if (port == NV_VIO_SRX)
-			NVWriteVgaSeq(dev, bios->state.crtchead, index, data);
-		else	/* assume NV_CIO_CRX__COLOR */
-			NVWriteVgaCrtc(dev, bios->state.crtchead, index, data);
-	} else
-	if (bios->execute) {
-		uint32_t data32, shift = (index & 3) << 3;
-
-		still_alive();
-
-		data32  = bios_rd32(bios, NV50_PDISPLAY_VGACRTC(index & ~3));
-		data32 &= ~(0xff << shift);
-		data32 |= (data << shift);
-		bios_wr32(bios, NV50_PDISPLAY_VGACRTC(index & ~3), data32);
-	}
-
-	if (port == NV_CIO_CRX__COLOR &&
-	    index == NV_CIO_CRE_44 && data == NV_CIO_CRE_44_HEADB)
-		bios->state.crtchead = 1;
-}
-
-static uint8_t
-bios_port_rd(struct nvbios *bios, uint16_t port)
-{
-	uint8_t data, head = bios->state.crtchead;
-
-	if (!valid_port(bios, port))
-		return 0;
-
-	data = NVReadPRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port);
-
-	BIOSLOG(bios, "	IO read:  Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
-		port, head, data);
-
-	return data;
-}
-
-static void
-bios_port_wr(struct nvbios *bios, uint16_t port, uint8_t data)
-{
-	int head = bios->state.crtchead;
-
-	if (!valid_port(bios, port))
-		return;
-
-	LOG_OLD_VALUE(bios_port_rd(bios, port));
-	BIOSLOG(bios, "	IO write: Port: 0x%04X, Head: 0x%02X, Data: 0x%02X\n",
-		port, head, data);
-
-	if (!bios->execute)
-		return;
-
-	still_alive();
-	NVWritePRMVIO(bios->dev, head, NV_PRMVIO0_OFFSET + port, data);
-}
-
-static bool
-io_flag_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
-{
-	/*
-	 * The IO flag condition entry has 2 bytes for the CRTC port; 1 byte
-	 * for the CRTC index; 1 byte for the mask to apply to the value
-	 * retrieved from the CRTC; 1 byte for the shift right to apply to the
-	 * masked CRTC value; 2 bytes for the offset to the flag array, to
-	 * which the shifted value is added; 1 byte for the mask applied to the
-	 * value read from the flag array; and 1 byte for the value to compare
-	 * against the masked byte from the flag table.
-	 */
-
-	uint16_t condptr = bios->io_flag_condition_tbl_ptr + cond * IO_FLAG_CONDITION_SIZE;
-	uint16_t crtcport = ROM16(bios->data[condptr]);
-	uint8_t crtcindex = bios->data[condptr + 2];
-	uint8_t mask = bios->data[condptr + 3];
-	uint8_t shift = bios->data[condptr + 4];
-	uint16_t flagarray = ROM16(bios->data[condptr + 5]);
-	uint8_t flagarraymask = bios->data[condptr + 7];
-	uint8_t cmpval = bios->data[condptr + 8];
-	uint8_t data;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
-		      "Shift: 0x%02X, FlagArray: 0x%04X, FAMask: 0x%02X, "
-		      "Cmpval: 0x%02X\n",
-		offset, crtcport, crtcindex, mask, shift, flagarray, flagarraymask, cmpval);
-
-	data = bios_idxprt_rd(bios, crtcport, crtcindex);
-
-	data = bios->data[flagarray + ((data & mask) >> shift)];
-	data &= flagarraymask;
-
-	BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
-		offset, data, cmpval);
-
-	return (data == cmpval);
-}
-
-static bool
-bios_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
-{
-	/*
-	 * The condition table entry has 4 bytes for the address of the
-	 * register to check, 4 bytes for a mask to apply to the register and
-	 * 4 for a test comparison value
-	 */
-
-	uint16_t condptr = bios->condition_tbl_ptr + cond * CONDITION_SIZE;
-	uint32_t reg = ROM32(bios->data[condptr]);
-	uint32_t mask = ROM32(bios->data[condptr + 4]);
-	uint32_t cmpval = ROM32(bios->data[condptr + 8]);
-	uint32_t data;
-
-	BIOSLOG(bios, "0x%04X: Cond: 0x%02X, Reg: 0x%08X, Mask: 0x%08X\n",
-		offset, cond, reg, mask);
-
-	data = bios_rd32(bios, reg) & mask;
-
-	BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
-		offset, data, cmpval);
-
-	return (data == cmpval);
-}
-
-static bool
-io_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
-{
-	/*
-	 * The IO condition entry has 2 bytes for the IO port address; 1 byte
-	 * for the index to write to io_port; 1 byte for the mask to apply to
-	 * the byte read from io_port+1; and 1 byte for the value to compare
-	 * against the masked byte.
-	 */
-
-	uint16_t condptr = bios->io_condition_tbl_ptr + cond * IO_CONDITION_SIZE;
-	uint16_t io_port = ROM16(bios->data[condptr]);
-	uint8_t port_index = bios->data[condptr + 2];
-	uint8_t mask = bios->data[condptr + 3];
-	uint8_t cmpval = bios->data[condptr + 4];
-
-	uint8_t data = bios_idxprt_rd(bios, io_port, port_index) & mask;
-
-	BIOSLOG(bios, "0x%04X: Checking if 0x%02X equals 0x%02X\n",
-		offset, data, cmpval);
-
-	return (data == cmpval);
-}
-
-static int dcb_entry_idx_from_crtchead(struct drm_device *dev)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-
-	/*
-	 * For the results of this function to be correct, CR44 must have been
-	 * set (using bios_idxprt_wr to set crtchead), CR58 set for CR57 = 0,
-	 * and the DCB table parsed, before the script calling the function is
-	 * run.  run_digital_op_script is example of how to do such setup
-	 */
-
-	uint8_t dcb_entry = NVReadVgaCrtc5758(dev, bios->state.crtchead, 0);
-
-	if (dcb_entry > bios->dcb.entries) {
-		NV_ERROR(dev, "CR58 doesn't have a valid DCB entry currently "
-				"(%02X)\n", dcb_entry);
-		dcb_entry = 0x7f;	/* unused / invalid marker */
-	}
-
-	return dcb_entry;
-}
-
-static struct nouveau_i2c_port *
-init_i2c_device_find(struct drm_device *dev, int i2c_index)
-{
-	if (i2c_index == 0xff) {
-		struct drm_nouveau_private *dev_priv = dev->dev_private;
-		struct dcb_table *dcb = &dev_priv->vbios.dcb;
-		/* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
-		int idx = dcb_entry_idx_from_crtchead(dev);
-
-		i2c_index = 0x80; //NV_I2C_DEFAULT(0);
-		if (idx != 0x7f && dcb->entry[idx].i2c_upper_default)
-			i2c_index = 0x81; //NV_I2C_DEFAULT(1);
-	}
-
-	return nouveau_i2c_find(dev, i2c_index);
-}
-
-static uint32_t
-get_tmds_index_reg(struct drm_device *dev, uint8_t mlv)
-{
-	/*
-	 * For mlv < 0x80, it is an index into a table of TMDS base addresses.
-	 * For mlv == 0x80 use the "or" value of the dcb_entry indexed by
-	 * CR58 for CR57 = 0 to index a table of offsets to the basic
-	 * 0x6808b0 address.
-	 * For mlv == 0x81 use the "or" value of the dcb_entry indexed by
-	 * CR58 for CR57 = 0 to index a table of offsets to the basic
-	 * 0x6808b0 address, and then flip the offset by 8.
-	 */
-
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	const int pramdac_offset[13] = {
-		0, 0, 0x8, 0, 0x2000, 0, 0, 0, 0x2008, 0, 0, 0, 0x2000 };
-	const uint32_t pramdac_table[4] = {
-		0x6808b0, 0x6808b8, 0x6828b0, 0x6828b8 };
-
-	if (mlv >= 0x80) {
-		int dcb_entry, dacoffset;
-
-		/* note: dcb_entry_idx_from_crtchead needs pre-script set-up */
-		dcb_entry = dcb_entry_idx_from_crtchead(dev);
-		if (dcb_entry == 0x7f)
-			return 0;
-		dacoffset = pramdac_offset[bios->dcb.entry[dcb_entry].or];
-		if (mlv == 0x81)
-			dacoffset ^= 8;
-		return 0x6808b0 + dacoffset;
-	} else {
-		if (mlv >= ARRAY_SIZE(pramdac_table)) {
-			NV_ERROR(dev, "Magic Lookup Value too big (%02X)\n",
-									mlv);
-			return 0;
-		}
-		return pramdac_table[mlv];
-	}
-}
-
-static int
-init_io_restrict_prog(struct nvbios *bios, uint16_t offset,
-		      struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO_RESTRICT_PROG   opcode: 0x32 ('2')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): CRTC index
-	 * offset + 4  (8  bit): mask
-	 * offset + 5  (8  bit): shift
-	 * offset + 6  (8  bit): count
-	 * offset + 7  (32 bit): register
-	 * offset + 11 (32 bit): configuration 1
-	 * ...
-	 *
-	 * Starting at offset + 11 there are "count" 32 bit values.
-	 * To find out which value to use read index "CRTC index" on "CRTC
-	 * port", AND this value with "mask" and then bit shift right "shift"
-	 * bits.  Read the appropriate value using this index and write to
-	 * "register"
-	 */
-
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t crtcindex = bios->data[offset + 3];
-	uint8_t mask = bios->data[offset + 4];
-	uint8_t shift = bios->data[offset + 5];
-	uint8_t count = bios->data[offset + 6];
-	uint32_t reg = ROM32(bios->data[offset + 7]);
-	uint8_t config;
-	uint32_t configval;
-	int len = 11 + count * 4;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
-		      "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
-		offset, crtcport, crtcindex, mask, shift, count, reg);
-
-	config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
-	if (config > count) {
-		NV_ERROR(bios->dev,
-			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
-			 offset, config, count);
-		return len;
-	}
-
-	configval = ROM32(bios->data[offset + 11 + config * 4]);
-
-	BIOSLOG(bios, "0x%04X: Writing config %02X\n", offset, config);
-
-	bios_wr32(bios, reg, configval);
-
-	return len;
-}
-
-static int
-init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_REPEAT   opcode: 0x33 ('3')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): count
-	 *
-	 * Execute script following this opcode up to INIT_REPEAT_END
-	 * "count" times
-	 */
-
-	uint8_t count = bios->data[offset + 1];
-	uint8_t i;
-
-	/* no iexec->execute check by design */
-
-	BIOSLOG(bios, "0x%04X: Repeating following segment %d times\n",
-		offset, count);
-
-	iexec->repeat = true;
-
-	/*
-	 * count - 1, as the script block will execute once when we leave this
-	 * opcode -- this is compatible with bios behaviour as:
-	 * a) the block is always executed at least once, even if count == 0
-	 * b) the bios interpreter skips to the op following INIT_END_REPEAT,
-	 * while we don't
-	 */
-	for (i = 0; i < count - 1; i++)
-		parse_init_table(bios, offset + 2, iexec);
-
-	iexec->repeat = false;
-
-	return 2;
-}
-
-static int
-init_io_restrict_pll(struct nvbios *bios, uint16_t offset,
-		     struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO_RESTRICT_PLL   opcode: 0x34 ('4')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): CRTC index
-	 * offset + 4  (8  bit): mask
-	 * offset + 5  (8  bit): shift
-	 * offset + 6  (8  bit): IO flag condition index
-	 * offset + 7  (8  bit): count
-	 * offset + 8  (32 bit): register
-	 * offset + 12 (16 bit): frequency 1
-	 * ...
-	 *
-	 * Starting at offset + 12 there are "count" 16 bit frequencies (10kHz).
-	 * Set PLL register "register" to coefficients for frequency n,
-	 * selected by reading index "CRTC index" of "CRTC port" ANDed with
-	 * "mask" and shifted right by "shift".
-	 *
-	 * If "IO flag condition index" > 0, and condition met, double
-	 * frequency before setting it.
-	 */
-
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t crtcindex = bios->data[offset + 3];
-	uint8_t mask = bios->data[offset + 4];
-	uint8_t shift = bios->data[offset + 5];
-	int8_t io_flag_condition_idx = bios->data[offset + 6];
-	uint8_t count = bios->data[offset + 7];
-	uint32_t reg = ROM32(bios->data[offset + 8]);
-	uint8_t config;
-	uint16_t freq;
-	int len = 12 + count * 2;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
-		      "Shift: 0x%02X, IO Flag Condition: 0x%02X, "
-		      "Count: 0x%02X, Reg: 0x%08X\n",
-		offset, crtcport, crtcindex, mask, shift,
-		io_flag_condition_idx, count, reg);
-
-	config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
-	if (config > count) {
-		NV_ERROR(bios->dev,
-			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
-			 offset, config, count);
-		return len;
-	}
-
-	freq = ROM16(bios->data[offset + 12 + config * 2]);
-
-	if (io_flag_condition_idx > 0) {
-		if (io_flag_condition_met(bios, offset, io_flag_condition_idx)) {
-			BIOSLOG(bios, "0x%04X: Condition fulfilled -- "
-				      "frequency doubled\n", offset);
-			freq *= 2;
-		} else
-			BIOSLOG(bios, "0x%04X: Condition not fulfilled -- "
-				      "frequency unchanged\n", offset);
-	}
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %d0kHz\n",
-		offset, reg, config, freq);
-
-	setPLL(bios->dev, reg, freq * 10);
-
-	return len;
-}
-
-static int
-init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_END_REPEAT   opcode: 0x36 ('6')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Marks the end of the block for INIT_REPEAT to repeat
-	 */
-
-	/* no iexec->execute check by design */
-
-	/*
-	 * iexec->repeat flag necessary to go past INIT_END_REPEAT opcode when
-	 * we're not in repeat mode
-	 */
-	if (iexec->repeat)
-		return 0;
-
-	return 1;
-}
-
-static int
-init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_COPY   opcode: 0x37 ('7')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (8  bit): shift
-	 * offset + 6  (8  bit): srcmask
-	 * offset + 7  (16 bit): CRTC port
-	 * offset + 9  (8 bit): CRTC index
-	 * offset + 10  (8 bit): mask
-	 *
-	 * Read index "CRTC index" on "CRTC port", AND with "mask", OR with
-	 * (REGVAL("register") >> "shift" & "srcmask") and write-back to CRTC
-	 * port
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint8_t shift = bios->data[offset + 5];
-	uint8_t srcmask = bios->data[offset + 6];
-	uint16_t crtcport = ROM16(bios->data[offset + 7]);
-	uint8_t crtcindex = bios->data[offset + 9];
-	uint8_t mask = bios->data[offset + 10];
-	uint32_t data;
-	uint8_t crtcdata;
-
-	if (!iexec->execute)
-		return 11;
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, "
-		      "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n",
-		offset, reg, shift, srcmask, crtcport, crtcindex, mask);
-
-	data = bios_rd32(bios, reg);
-
-	if (shift < 0x80)
-		data >>= shift;
-	else
-		data <<= (0x100 - shift);
-
-	data &= srcmask;
-
-	crtcdata  = bios_idxprt_rd(bios, crtcport, crtcindex) & mask;
-	crtcdata |= (uint8_t)data;
-	bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata);
-
-	return 11;
-}
-
-static int
-init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_NOT   opcode: 0x38 ('8')
-	 *
-	 * offset      (8  bit): opcode
-	 *
-	 * Invert the current execute / no-execute condition (i.e. "else")
-	 */
-	if (iexec->execute)
-		BIOSLOG(bios, "0x%04X: ------ Skipping following commands  ------\n", offset);
-	else
-		BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset);
-
-	iexec->execute = !iexec->execute;
-	return 1;
-}
-
-static int
-init_io_flag_condition(struct nvbios *bios, uint16_t offset,
-		       struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO_FLAG_CONDITION   opcode: 0x39 ('9')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): condition number
-	 *
-	 * Check condition "condition number" in the IO flag condition table.
-	 * If condition not met skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t cond = bios->data[offset + 1];
-
-	if (!iexec->execute)
-		return 2;
-
-	if (io_flag_condition_met(bios, offset, cond))
-		BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
-	else {
-		BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
-		iexec->execute = false;
-	}
-
-	return 2;
-}
-
-static int
-init_dp_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_DP_CONDITION   opcode: 0x3A ('')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): "sub" opcode
-	 * offset + 2  (8 bit): unknown
-	 *
-	 */
-
-	struct dcb_entry *dcb = bios->display.output;
-	struct drm_device *dev = bios->dev;
-	uint8_t cond = bios->data[offset + 1];
-	uint8_t *table, *entry;
-
-	BIOSLOG(bios, "0x%04X: subop 0x%02X\n", offset, cond);
-
-	if (!iexec->execute)
-		return 3;
-
-	table = nouveau_dp_bios_data(dev, dcb, &entry);
-	if (!table)
-		return 3;
-
-	switch (cond) {
-	case 0:
-		entry = dcb_conn(dev, dcb->connector);
-		if (!entry || entry[0] != DCB_CONNECTOR_eDP)
-			iexec->execute = false;
-		break;
-	case 1:
-	case 2:
-		if ((table[0]  < 0x40 && !(entry[5] & cond)) ||
-		    (table[0] == 0x40 && !(entry[4] & cond)))
-			iexec->execute = false;
-		break;
-	case 5:
-	{
-		struct nouveau_i2c_port *auxch;
-		int ret;
-
-		auxch = nouveau_i2c_find(dev, bios->display.output->i2c_index);
-		if (!auxch) {
-			NV_ERROR(dev, "0x%04X: couldn't get auxch\n", offset);
-			return 3;
-		}
-
-		ret = auxch_rd(dev, auxch, 0xd, &cond, 1);
-		if (ret) {
-			NV_ERROR(dev, "0x%04X: auxch rd fail: %d\n", offset, ret);
-			return 3;
-		}
-
-		if (!(cond & 1))
-			iexec->execute = false;
-	}
-		break;
-	default:
-		NV_WARN(dev, "0x%04X: unknown INIT_3A op: %d\n", offset, cond);
-		break;
-	}
-
-	if (iexec->execute)
-		BIOSLOG(bios, "0x%04X: continuing to execute\n", offset);
-	else
-		BIOSLOG(bios, "0x%04X: skipping following commands\n", offset);
-
-	return 3;
-}
-
-static int
-init_op_3b(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_3B   opcode: 0x3B ('')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): crtc index
-	 *
-	 */
-
-	uint8_t or = ffs(bios->display.output->or) - 1;
-	uint8_t index = bios->data[offset + 1];
-	uint8_t data;
-
-	if (!iexec->execute)
-		return 2;
-
-	data = bios_idxprt_rd(bios, 0x3d4, index);
-	bios_idxprt_wr(bios, 0x3d4, index, data & ~(1 << or));
-	return 2;
-}
-
-static int
-init_op_3c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_3C   opcode: 0x3C ('')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): crtc index
-	 *
-	 */
-
-	uint8_t or = ffs(bios->display.output->or) - 1;
-	uint8_t index = bios->data[offset + 1];
-	uint8_t data;
-
-	if (!iexec->execute)
-		return 2;
-
-	data = bios_idxprt_rd(bios, 0x3d4, index);
-	bios_idxprt_wr(bios, 0x3d4, index, data | (1 << or));
-	return 2;
-}
-
-static int
-init_idx_addr_latched(struct nvbios *bios, uint16_t offset,
-		      struct init_exec *iexec)
-{
-	/*
-	 * INIT_INDEX_ADDRESS_LATCHED   opcode: 0x49 ('I')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): control register
-	 * offset + 5  (32 bit): data register
-	 * offset + 9  (32 bit): mask
-	 * offset + 13 (32 bit): data
-	 * offset + 17 (8  bit): count
-	 * offset + 18 (8  bit): address 1
-	 * offset + 19 (8  bit): data 1
-	 * ...
-	 *
-	 * For each of "count" address and data pairs, write "data n" to
-	 * "data register", read the current value of "control register",
-	 * and write it back once ANDed with "mask", ORed with "data",
-	 * and ORed with "address n"
-	 */
-
-	uint32_t controlreg = ROM32(bios->data[offset + 1]);
-	uint32_t datareg = ROM32(bios->data[offset + 5]);
-	uint32_t mask = ROM32(bios->data[offset + 9]);
-	uint32_t data = ROM32(bios->data[offset + 13]);
-	uint8_t count = bios->data[offset + 17];
-	int len = 18 + count * 2;
-	uint32_t value;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, "
-		      "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n",
-		offset, controlreg, datareg, mask, data, count);
-
-	for (i = 0; i < count; i++) {
-		uint8_t instaddress = bios->data[offset + 18 + i * 2];
-		uint8_t instdata = bios->data[offset + 19 + i * 2];
-
-		BIOSLOG(bios, "0x%04X: Address: 0x%02X, Data: 0x%02X\n",
-			offset, instaddress, instdata);
-
-		bios_wr32(bios, datareg, instdata);
-		value  = bios_rd32(bios, controlreg) & mask;
-		value |= data;
-		value |= instaddress;
-		bios_wr32(bios, controlreg, value);
-	}
-
-	return len;
-}
-
-static int
-init_io_restrict_pll2(struct nvbios *bios, uint16_t offset,
-		      struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO_RESTRICT_PLL2   opcode: 0x4A ('J')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): CRTC index
-	 * offset + 4  (8  bit): mask
-	 * offset + 5  (8  bit): shift
-	 * offset + 6  (8  bit): count
-	 * offset + 7  (32 bit): register
-	 * offset + 11 (32 bit): frequency 1
-	 * ...
-	 *
-	 * Starting at offset + 11 there are "count" 32 bit frequencies (kHz).
-	 * Set PLL register "register" to coefficients for frequency n,
-	 * selected by reading index "CRTC index" of "CRTC port" ANDed with
-	 * "mask" and shifted right by "shift".
-	 */
-
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t crtcindex = bios->data[offset + 3];
-	uint8_t mask = bios->data[offset + 4];
-	uint8_t shift = bios->data[offset + 5];
-	uint8_t count = bios->data[offset + 6];
-	uint32_t reg = ROM32(bios->data[offset + 7]);
-	int len = 11 + count * 4;
-	uint8_t config;
-	uint32_t freq;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
-		      "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n",
-		offset, crtcport, crtcindex, mask, shift, count, reg);
-
-	if (!reg)
-		return len;
-
-	config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift;
-	if (config > count) {
-		NV_ERROR(bios->dev,
-			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
-			 offset, config, count);
-		return len;
-	}
-
-	freq = ROM32(bios->data[offset + 11 + config * 4]);
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %dkHz\n",
-		offset, reg, config, freq);
-
-	setPLL(bios->dev, reg, freq);
-
-	return len;
-}
-
-static int
-init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_PLL2   opcode: 0x4B ('K')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (32 bit): freq
-	 *
-	 * Set PLL register "register" to coefficients for frequency "freq"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint32_t freq = ROM32(bios->data[offset + 5]);
-
-	if (!iexec->execute)
-		return 9;
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n",
-		offset, reg, freq);
-
-	setPLL(bios->dev, reg, freq);
-	return 9;
-}
-
-static int
-init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_I2C_BYTE   opcode: 0x4C ('L')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): DCB I2C table entry index
-	 * offset + 2  (8 bit): I2C slave address
-	 * offset + 3  (8 bit): count
-	 * offset + 4  (8 bit): I2C register 1
-	 * offset + 5  (8 bit): mask 1
-	 * offset + 6  (8 bit): data 1
-	 * ...
-	 *
-	 * For each of "count" registers given by "I2C register n" on the device
-	 * addressed by "I2C slave address" on the I2C bus given by
-	 * "DCB I2C table entry index", read the register, AND the result with
-	 * "mask n" and OR it with "data n" before writing it back to the device
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint8_t i2c_index = bios->data[offset + 1];
-	uint8_t i2c_address = bios->data[offset + 2] >> 1;
-	uint8_t count = bios->data[offset + 3];
-	struct nouveau_i2c_port *chan;
-	int len = 4 + count * 3;
-	int ret, i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
-		      "Count: 0x%02X\n",
-		offset, i2c_index, i2c_address, count);
-
-	chan = init_i2c_device_find(dev, i2c_index);
-	if (!chan) {
-		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
-		return len;
-	}
-
-	for (i = 0; i < count; i++) {
-		uint8_t reg = bios->data[offset + 4 + i * 3];
-		uint8_t mask = bios->data[offset + 5 + i * 3];
-		uint8_t data = bios->data[offset + 6 + i * 3];
-		union i2c_smbus_data val;
-
-		ret = i2c_smbus_xfer(nouveau_i2c_adapter(chan), i2c_address, 0,
-				     I2C_SMBUS_READ, reg,
-				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0) {
-			NV_ERROR(dev, "0x%04X: i2c rd fail: %d\n", offset, ret);
-			return len;
-		}
-
-		BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
-			      "Mask: 0x%02X, Data: 0x%02X\n",
-			offset, reg, val.byte, mask, data);
-
-		if (!bios->execute)
-			continue;
-
-		val.byte &= mask;
-		val.byte |= data;
-		ret = i2c_smbus_xfer(nouveau_i2c_adapter(chan), i2c_address, 0,
-				     I2C_SMBUS_WRITE, reg,
-				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0) {
-			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
-			return len;
-		}
-	}
-
-	return len;
-}
-
-static int
-init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_I2C_BYTE   opcode: 0x4D ('M')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): DCB I2C table entry index
-	 * offset + 2  (8 bit): I2C slave address
-	 * offset + 3  (8 bit): count
-	 * offset + 4  (8 bit): I2C register 1
-	 * offset + 5  (8 bit): data 1
-	 * ...
-	 *
-	 * For each of "count" registers given by "I2C register n" on the device
-	 * addressed by "I2C slave address" on the I2C bus given by
-	 * "DCB I2C table entry index", set the register to "data n"
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint8_t i2c_index = bios->data[offset + 1];
-	uint8_t i2c_address = bios->data[offset + 2] >> 1;
-	uint8_t count = bios->data[offset + 3];
-	struct nouveau_i2c_port *chan;
-	int len = 4 + count * 2;
-	int ret, i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
-		      "Count: 0x%02X\n",
-		offset, i2c_index, i2c_address, count);
-
-	chan = init_i2c_device_find(dev, i2c_index);
-	if (!chan) {
-		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
-		return len;
-	}
-
-	for (i = 0; i < count; i++) {
-		uint8_t reg = bios->data[offset + 4 + i * 2];
-		union i2c_smbus_data val;
-
-		val.byte = bios->data[offset + 5 + i * 2];
-
-		BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Data: 0x%02X\n",
-			offset, reg, val.byte);
-
-		if (!bios->execute)
-			continue;
-
-		ret = i2c_smbus_xfer(nouveau_i2c_adapter(chan), i2c_address, 0,
-				     I2C_SMBUS_WRITE, reg,
-				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0) {
-			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
-			return len;
-		}
-	}
-
-	return len;
-}
-
-static int
-init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_I2C   opcode: 0x4E ('N')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): DCB I2C table entry index
-	 * offset + 2  (8 bit): I2C slave address
-	 * offset + 3  (8 bit): count
-	 * offset + 4  (8 bit): data 1
-	 * ...
-	 *
-	 * Send "count" bytes ("data n") to the device addressed by "I2C slave
-	 * address" on the I2C bus given by "DCB I2C table entry index"
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint8_t i2c_index = bios->data[offset + 1];
-	uint8_t i2c_address = bios->data[offset + 2] >> 1;
-	uint8_t count = bios->data[offset + 3];
-	int len = 4 + count;
-	struct nouveau_i2c_port *chan;
-	struct i2c_msg msg;
-	uint8_t data[256];
-	int ret, i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, "
-		      "Count: 0x%02X\n",
-		offset, i2c_index, i2c_address, count);
-
-	chan = init_i2c_device_find(dev, i2c_index);
-	if (!chan) {
-		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
-		return len;
-	}
-
-	for (i = 0; i < count; i++) {
-		data[i] = bios->data[offset + 4 + i];
-
-		BIOSLOG(bios, "0x%04X: Data: 0x%02X\n", offset, data[i]);
-	}
-
-	if (bios->execute) {
-		msg.addr = i2c_address;
-		msg.flags = 0;
-		msg.len = count;
-		msg.buf = data;
-		ret = i2c_transfer(nouveau_i2c_adapter(chan), &msg, 1);
-		if (ret != 1) {
-			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
-			return len;
-		}
-	}
-
-	return len;
-}
-
-static int
-init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_TMDS   opcode: 0x4F ('O')	(non-canon name)
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): magic lookup value
-	 * offset + 2  (8 bit): TMDS address
-	 * offset + 3  (8 bit): mask
-	 * offset + 4  (8 bit): data
-	 *
-	 * Read the data reg for TMDS address "TMDS address", AND it with mask
-	 * and OR it with data, then write it back
-	 * "magic lookup value" determines which TMDS base address register is
-	 * used -- see get_tmds_index_reg()
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint8_t mlv = bios->data[offset + 1];
-	uint32_t tmdsaddr = bios->data[offset + 2];
-	uint8_t mask = bios->data[offset + 3];
-	uint8_t data = bios->data[offset + 4];
-	uint32_t reg, value;
-
-	if (!iexec->execute)
-		return 5;
-
-	BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, "
-		      "Mask: 0x%02X, Data: 0x%02X\n",
-		offset, mlv, tmdsaddr, mask, data);
-
-	reg = get_tmds_index_reg(bios->dev, mlv);
-	if (!reg) {
-		NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
-		return 5;
-	}
-
-	bios_wr32(bios, reg,
-		  tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE);
-	value = (bios_rd32(bios, reg + 4) & mask) | data;
-	bios_wr32(bios, reg + 4, value);
-	bios_wr32(bios, reg, tmdsaddr);
-
-	return 5;
-}
-
-static int
-init_zm_tmds_group(struct nvbios *bios, uint16_t offset,
-		   struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_TMDS_GROUP   opcode: 0x50 ('P')	(non-canon name)
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): magic lookup value
-	 * offset + 2  (8 bit): count
-	 * offset + 3  (8 bit): addr 1
-	 * offset + 4  (8 bit): data 1
-	 * ...
-	 *
-	 * For each of "count" TMDS address and data pairs write "data n" to
-	 * "addr n".  "magic lookup value" determines which TMDS base address
-	 * register is used -- see get_tmds_index_reg()
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint8_t mlv = bios->data[offset + 1];
-	uint8_t count = bios->data[offset + 2];
-	int len = 3 + count * 2;
-	uint32_t reg;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n",
-		offset, mlv, count);
-
-	reg = get_tmds_index_reg(bios->dev, mlv);
-	if (!reg) {
-		NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
-		return len;
-	}
-
-	for (i = 0; i < count; i++) {
-		uint8_t tmdsaddr = bios->data[offset + 3 + i * 2];
-		uint8_t tmdsdata = bios->data[offset + 4 + i * 2];
-
-		bios_wr32(bios, reg + 4, tmdsdata);
-		bios_wr32(bios, reg, tmdsaddr);
-	}
-
-	return len;
-}
-
-static int
-init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset,
-		      struct init_exec *iexec)
-{
-	/*
-	 * INIT_CR_INDEX_ADDRESS_LATCHED   opcode: 0x51 ('Q')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): CRTC index1
-	 * offset + 2  (8 bit): CRTC index2
-	 * offset + 3  (8 bit): baseaddr
-	 * offset + 4  (8 bit): count
-	 * offset + 5  (8 bit): data 1
-	 * ...
-	 *
-	 * For each of "count" address and data pairs, write "baseaddr + n" to
-	 * "CRTC index1" and "data n" to "CRTC index2"
-	 * Once complete, restore initial value read from "CRTC index1"
-	 */
-	uint8_t crtcindex1 = bios->data[offset + 1];
-	uint8_t crtcindex2 = bios->data[offset + 2];
-	uint8_t baseaddr = bios->data[offset + 3];
-	uint8_t count = bios->data[offset + 4];
-	int len = 5 + count;
-	uint8_t oldaddr, data;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, "
-		      "BaseAddr: 0x%02X, Count: 0x%02X\n",
-		offset, crtcindex1, crtcindex2, baseaddr, count);
-
-	oldaddr = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex1);
-
-	for (i = 0; i < count; i++) {
-		bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1,
-				     baseaddr + i);
-		data = bios->data[offset + 5 + i];
-		bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex2, data);
-	}
-
-	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr);
-
-	return len;
-}
-
-static int
-init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_CR   opcode: 0x52 ('R')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (8  bit): CRTC index
-	 * offset + 2  (8  bit): mask
-	 * offset + 3  (8  bit): data
-	 *
-	 * Assign the value of at "CRTC index" ANDed with mask and ORed with
-	 * data back to "CRTC index"
-	 */
-
-	uint8_t crtcindex = bios->data[offset + 1];
-	uint8_t mask = bios->data[offset + 2];
-	uint8_t data = bios->data[offset + 3];
-	uint8_t value;
-
-	if (!iexec->execute)
-		return 4;
-
-	BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n",
-		offset, crtcindex, mask, data);
-
-	value  = bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, crtcindex) & mask;
-	value |= data;
-	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value);
-
-	return 4;
-}
-
-static int
-init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_CR   opcode: 0x53 ('S')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): CRTC index
-	 * offset + 2  (8 bit): value
-	 *
-	 * Assign "value" to CRTC register with index "CRTC index".
-	 */
-
-	uint8_t crtcindex = ROM32(bios->data[offset + 1]);
-	uint8_t data = bios->data[offset + 2];
-
-	if (!iexec->execute)
-		return 3;
-
-	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data);
-
-	return 3;
-}
-
-static int
-init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_CR_GROUP   opcode: 0x54 ('T')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): count
-	 * offset + 2  (8 bit): CRTC index 1
-	 * offset + 3  (8 bit): value 1
-	 * ...
-	 *
-	 * For "count", assign "value n" to CRTC register with index
-	 * "CRTC index n".
-	 */
-
-	uint8_t count = bios->data[offset + 1];
-	int len = 2 + count * 2;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	for (i = 0; i < count; i++)
-		init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec);
-
-	return len;
-}
-
-static int
-init_condition_time(struct nvbios *bios, uint16_t offset,
-		    struct init_exec *iexec)
-{
-	/*
-	 * INIT_CONDITION_TIME   opcode: 0x56 ('V')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): condition number
-	 * offset + 2  (8 bit): retries / 50
-	 *
-	 * Check condition "condition number" in the condition table.
-	 * Bios code then sleeps for 2ms if the condition is not met, and
-	 * repeats up to "retries" times, but on one C51 this has proved
-	 * insufficient.  In mmiotraces the driver sleeps for 20ms, so we do
-	 * this, and bail after "retries" times, or 2s, whichever is less.
-	 * If still not met after retries, clear execution flag for this table.
-	 */
-
-	uint8_t cond = bios->data[offset + 1];
-	uint16_t retries = bios->data[offset + 2] * 50;
-	unsigned cnt;
-
-	if (!iexec->execute)
-		return 3;
-
-	if (retries > 100)
-		retries = 100;
-
-	BIOSLOG(bios, "0x%04X: Condition: 0x%02X, Retries: 0x%02X\n",
-		offset, cond, retries);
-
-	if (!bios->execute) /* avoid 2s delays when "faking" execution */
-		retries = 1;
-
-	for (cnt = 0; cnt < retries; cnt++) {
-		if (bios_condition_met(bios, offset, cond)) {
-			BIOSLOG(bios, "0x%04X: Condition met, continuing\n",
-								offset);
-			break;
-		} else {
-			BIOSLOG(bios, "0x%04X: "
-				"Condition not met, sleeping for 20ms\n",
-								offset);
-			mdelay(20);
-		}
-	}
-
-	if (!bios_condition_met(bios, offset, cond)) {
-		NV_WARN(bios->dev,
-			"0x%04X: Condition still not met after %dms, "
-			"skipping following opcodes\n", offset, 20 * retries);
-		iexec->execute = false;
-	}
-
-	return 3;
-}
-
-static int
-init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_LTIME   opcode: 0x57 ('V')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): time
-	 *
-	 * Sleep for "time" milliseconds.
-	 */
-
-	unsigned time = ROM16(bios->data[offset + 1]);
-
-	if (!iexec->execute)
-		return 3;
-
-	BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
-		offset, time);
-
-	mdelay(time);
-
-	return 3;
-}
-
-static int
-init_zm_reg_sequence(struct nvbios *bios, uint16_t offset,
-		     struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_REG_SEQUENCE   opcode: 0x58 ('X')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): base register
-	 * offset + 5  (8  bit): count
-	 * offset + 6  (32 bit): value 1
-	 * ...
-	 *
-	 * Starting at offset + 6 there are "count" 32 bit values.
-	 * For "count" iterations set "base register" + 4 * current_iteration
-	 * to "value current_iteration"
-	 */
-
-	uint32_t basereg = ROM32(bios->data[offset + 1]);
-	uint32_t count = bios->data[offset + 5];
-	int len = 6 + count * 4;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n",
-		offset, basereg, count);
-
-	for (i = 0; i < count; i++) {
-		uint32_t reg = basereg + i * 4;
-		uint32_t data = ROM32(bios->data[offset + 6 + i * 4]);
-
-		bios_wr32(bios, reg, data);
-	}
-
-	return len;
-}
-
-static int
-init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_SUB_DIRECT   opcode: 0x5B ('[')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): subroutine offset (in bios)
-	 *
-	 * Calls a subroutine that will execute commands until INIT_DONE
-	 * is found.
-	 */
-
-	uint16_t sub_offset = ROM16(bios->data[offset + 1]);
-
-	if (!iexec->execute)
-		return 3;
-
-	BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n",
-		offset, sub_offset);
-
-	parse_init_table(bios, sub_offset, iexec);
-
-	BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset);
-
-	return 3;
-}
-
-static int
-init_jump(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_JUMP   opcode: 0x5C ('\')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): offset (in bios)
-	 *
-	 * Continue execution of init table from 'offset'
-	 */
-
-	uint16_t jmp_offset = ROM16(bios->data[offset + 1]);
-
-	if (!iexec->execute)
-		return 3;
-
-	BIOSLOG(bios, "0x%04X: Jump to 0x%04X\n", offset, jmp_offset);
-	return jmp_offset - offset;
-}
-
-static int
-init_i2c_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_I2C_IF   opcode: 0x5E ('^')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): DCB I2C table entry index
-	 * offset + 2  (8 bit): I2C slave address
-	 * offset + 3  (8 bit): I2C register
-	 * offset + 4  (8 bit): mask
-	 * offset + 5  (8 bit): data
-	 *
-	 * Read the register given by "I2C register" on the device addressed
-	 * by "I2C slave address" on the I2C bus given by "DCB I2C table
-	 * entry index". Compare the result AND "mask" to "data".
-	 * If they're not equal, skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t i2c_index = bios->data[offset + 1];
-	uint8_t i2c_address = bios->data[offset + 2] >> 1;
-	uint8_t reg = bios->data[offset + 3];
-	uint8_t mask = bios->data[offset + 4];
-	uint8_t data = bios->data[offset + 5];
-	struct nouveau_i2c_port *chan;
-	union i2c_smbus_data val;
-	int ret;
-
-	/* no execute check by design */
-
-	BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
-		offset, i2c_index, i2c_address);
-
-	chan = init_i2c_device_find(bios->dev, i2c_index);
-	if (!chan)
-		return -ENODEV;
-
-	ret = i2c_smbus_xfer(nouveau_i2c_adapter(chan), i2c_address, 0,
-			     I2C_SMBUS_READ, reg,
-			     I2C_SMBUS_BYTE_DATA, &val);
-	if (ret < 0) {
-		BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: [no device], "
-			      "Mask: 0x%02X, Data: 0x%02X\n",
-			offset, reg, mask, data);
-		iexec->execute = 0;
-		return 6;
-	}
-
-	BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
-		      "Mask: 0x%02X, Data: 0x%02X\n",
-		offset, reg, val.byte, mask, data);
-
-	iexec->execute = ((val.byte & mask) == data);
-
-	return 6;
-}
-
-static int
-init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_COPY_NV_REG   opcode: 0x5F ('_')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): src reg
-	 * offset + 5  (8  bit): shift
-	 * offset + 6  (32 bit): src mask
-	 * offset + 10 (32 bit): xor
-	 * offset + 14 (32 bit): dst reg
-	 * offset + 18 (32 bit): dst mask
-	 *
-	 * Shift REGVAL("src reg") right by (signed) "shift", AND result with
-	 * "src mask", then XOR with "xor". Write this OR'd with
-	 * (REGVAL("dst reg") AND'd with "dst mask") to "dst reg"
-	 */
-
-	uint32_t srcreg = *((uint32_t *)(&bios->data[offset + 1]));
-	uint8_t shift = bios->data[offset + 5];
-	uint32_t srcmask = *((uint32_t *)(&bios->data[offset + 6]));
-	uint32_t xor = *((uint32_t *)(&bios->data[offset + 10]));
-	uint32_t dstreg = *((uint32_t *)(&bios->data[offset + 14]));
-	uint32_t dstmask = *((uint32_t *)(&bios->data[offset + 18]));
-	uint32_t srcvalue, dstvalue;
-
-	if (!iexec->execute)
-		return 22;
-
-	BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, "
-		      "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n",
-		offset, srcreg, shift, srcmask, xor, dstreg, dstmask);
-
-	srcvalue = bios_rd32(bios, srcreg);
-
-	if (shift < 0x80)
-		srcvalue >>= shift;
-	else
-		srcvalue <<= (0x100 - shift);
-
-	srcvalue = (srcvalue & srcmask) ^ xor;
-
-	dstvalue = bios_rd32(bios, dstreg) & dstmask;
-
-	bios_wr32(bios, dstreg, dstvalue | srcvalue);
-
-	return 22;
-}
-
-static int
-init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_INDEX_IO   opcode: 0x62 ('b')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): CRTC index
-	 * offset + 4  (8  bit): data
-	 *
-	 * Write "data" to index "CRTC index" of "CRTC port"
-	 */
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t crtcindex = bios->data[offset + 3];
-	uint8_t data = bios->data[offset + 4];
-
-	if (!iexec->execute)
-		return 5;
-
-	bios_idxprt_wr(bios, crtcport, crtcindex, data);
-
-	return 5;
-}
-
-static inline void
-bios_md32(struct nvbios *bios, uint32_t reg,
-	  uint32_t mask, uint32_t val)
-{
-	bios_wr32(bios, reg, (bios_rd32(bios, reg) & ~mask) | val);
-}
-
-static uint32_t
-peek_fb(struct drm_device *dev, struct io_mapping *fb,
-	uint32_t off)
-{
-	uint32_t val = 0;
-
-	if (off < pci_resource_len(dev->pdev, 1)) {
-		uint8_t __iomem *p =
-			io_mapping_map_atomic_wc(fb, off & PAGE_MASK);
-
-		val = ioread32(p + (off & ~PAGE_MASK));
-
-		io_mapping_unmap_atomic(p);
-	}
-
-	return val;
-}
-
-static void
-poke_fb(struct drm_device *dev, struct io_mapping *fb,
-	uint32_t off, uint32_t val)
-{
-	if (off < pci_resource_len(dev->pdev, 1)) {
-		uint8_t __iomem *p =
-			io_mapping_map_atomic_wc(fb, off & PAGE_MASK);
-
-		iowrite32(val, p + (off & ~PAGE_MASK));
-		wmb();
-
-		io_mapping_unmap_atomic(p);
-	}
-}
-
-static inline bool
-read_back_fb(struct drm_device *dev, struct io_mapping *fb,
-	     uint32_t off, uint32_t val)
-{
-	poke_fb(dev, fb, off, val);
-	return val == peek_fb(dev, fb, off);
-}
-
-static int
-nv04_init_compute_mem(struct nvbios *bios)
-{
-	struct drm_device *dev = bios->dev;
-	uint32_t patt = 0xdeadbeef;
-	struct io_mapping *fb;
-	int i;
-
-	/* Map the framebuffer aperture */
-	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
-				  pci_resource_len(dev->pdev, 1));
-	if (!fb)
-		return -ENOMEM;
-
-	/* Sequencer and refresh off */
-	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
-	bios_md32(bios, NV04_PFB_DEBUG_0, 0, NV04_PFB_DEBUG_0_REFRESH_OFF);
-
-	bios_md32(bios, NV04_PFB_BOOT_0, ~0,
-		  NV04_PFB_BOOT_0_RAM_AMOUNT_16MB |
-		  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
-		  NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT);
-
-	for (i = 0; i < 4; i++)
-		poke_fb(dev, fb, 4 * i, patt);
-
-	poke_fb(dev, fb, 0x400000, patt + 1);
-
-	if (peek_fb(dev, fb, 0) == patt + 1) {
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
-			  NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_16MBIT);
-		bios_md32(bios, NV04_PFB_DEBUG_0,
-			  NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
-
-		for (i = 0; i < 4; i++)
-			poke_fb(dev, fb, 4 * i, patt);
-
-		if ((peek_fb(dev, fb, 0xc) & 0xffff) != (patt & 0xffff))
-			bios_md32(bios, NV04_PFB_BOOT_0,
-				  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
-				  NV04_PFB_BOOT_0_RAM_AMOUNT,
-				  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
-
-	} else if ((peek_fb(dev, fb, 0xc) & 0xffff0000) !=
-		   (patt & 0xffff0000)) {
-		bios_md32(bios, NV04_PFB_BOOT_0,
-			  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
-			  NV04_PFB_BOOT_0_RAM_AMOUNT,
-			  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
-
-	} else if (peek_fb(dev, fb, 0) != patt) {
-		if (read_back_fb(dev, fb, 0x800000, patt))
-			bios_md32(bios, NV04_PFB_BOOT_0,
-				  NV04_PFB_BOOT_0_RAM_AMOUNT,
-				  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
-		else
-			bios_md32(bios, NV04_PFB_BOOT_0,
-				  NV04_PFB_BOOT_0_RAM_AMOUNT,
-				  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
-
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
-			  NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_8MBIT);
-
-	} else if (!read_back_fb(dev, fb, 0x800000, patt)) {
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
-			  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
-
-	}
-
-	/* Refresh on, sequencer on */
-	bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
-	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
-
-	io_mapping_free(fb);
-	return 0;
-}
-
-static const uint8_t *
-nv05_memory_config(struct nvbios *bios)
-{
-	/* Defaults for BIOSes lacking a memory config table */
-	static const uint8_t default_config_tab[][2] = {
-		{ 0x24, 0x00 },
-		{ 0x28, 0x00 },
-		{ 0x24, 0x01 },
-		{ 0x1f, 0x00 },
-		{ 0x0f, 0x00 },
-		{ 0x17, 0x00 },
-		{ 0x06, 0x00 },
-		{ 0x00, 0x00 }
-	};
-	int i = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) &
-		 NV_PEXTDEV_BOOT_0_RAMCFG) >> 2;
-
-	if (bios->legacy.mem_init_tbl_ptr)
-		return &bios->data[bios->legacy.mem_init_tbl_ptr + 2 * i];
-	else
-		return default_config_tab[i];
-}
-
-static int
-nv05_init_compute_mem(struct nvbios *bios)
-{
-	struct drm_device *dev = bios->dev;
-	const uint8_t *ramcfg = nv05_memory_config(bios);
-	uint32_t patt = 0xdeadbeef;
-	struct io_mapping *fb;
-	int i, v;
-
-	/* Map the framebuffer aperture */
-	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
-				  pci_resource_len(dev->pdev, 1));
-	if (!fb)
-		return -ENOMEM;
-
-	/* Sequencer off */
-	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
-
-	if (bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_UMA_ENABLE)
-		goto out;
-
-	bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
-
-	/* If present load the hardcoded scrambling table */
-	if (bios->legacy.mem_init_tbl_ptr) {
-		uint32_t *scramble_tab = (uint32_t *)&bios->data[
-			bios->legacy.mem_init_tbl_ptr + 0x10];
-
-		for (i = 0; i < 8; i++)
-			bios_wr32(bios, NV04_PFB_SCRAMBLE(i),
-				  ROM32(scramble_tab[i]));
-	}
-
-	/* Set memory type/width/length defaults depending on the straps */
-	bios_md32(bios, NV04_PFB_BOOT_0, 0x3f, ramcfg[0]);
-
-	if (ramcfg[1] & 0x80)
-		bios_md32(bios, NV04_PFB_CFG0, 0, NV04_PFB_CFG0_SCRAMBLE);
-
-	bios_md32(bios, NV04_PFB_CFG1, 0x700001, (ramcfg[1] & 1) << 20);
-	bios_md32(bios, NV04_PFB_CFG1, 0, 1);
-
-	/* Probe memory bus width */
-	for (i = 0; i < 4; i++)
-		poke_fb(dev, fb, 4 * i, patt);
-
-	if (peek_fb(dev, fb, 0xc) != patt)
-		bios_md32(bios, NV04_PFB_BOOT_0,
-			  NV04_PFB_BOOT_0_RAM_WIDTH_128, 0);
-
-	/* Probe memory length */
-	v = bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_RAM_AMOUNT;
-
-	if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_32MB &&
-	    (!read_back_fb(dev, fb, 0x1000000, ++patt) ||
-	     !read_back_fb(dev, fb, 0, ++patt)))
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
-			  NV04_PFB_BOOT_0_RAM_AMOUNT_16MB);
-
-	if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_16MB &&
-	    !read_back_fb(dev, fb, 0x800000, ++patt))
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
-			  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
-
-	if (!read_back_fb(dev, fb, 0x400000, ++patt))
-		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
-			  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
-
-out:
-	/* Sequencer on */
-	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
-
-	io_mapping_free(fb);
-	return 0;
-}
-
-static int
-nv10_init_compute_mem(struct nvbios *bios)
-{
-	struct drm_device *dev = bios->dev;
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	const int mem_width[] = { 0x10, 0x00, 0x20 };
-	const int mem_width_count = (dev_priv->chipset >= 0x17 ? 3 : 2);
-	uint32_t patt = 0xdeadbeef;
-	struct io_mapping *fb;
-	int i, j, k;
-
-	/* Map the framebuffer aperture */
-	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
-				  pci_resource_len(dev->pdev, 1));
-	if (!fb)
-		return -ENOMEM;
-
-	bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
-
-	/* Probe memory bus width */
-	for (i = 0; i < mem_width_count; i++) {
-		bios_md32(bios, NV04_PFB_CFG0, 0x30, mem_width[i]);
-
-		for (j = 0; j < 4; j++) {
-			for (k = 0; k < 4; k++)
-				poke_fb(dev, fb, 0x1c, 0);
-
-			poke_fb(dev, fb, 0x1c, patt);
-			poke_fb(dev, fb, 0x3c, 0);
-
-			if (peek_fb(dev, fb, 0x1c) == patt)
-				goto mem_width_found;
-		}
-	}
-
-mem_width_found:
-	patt <<= 1;
-
-	/* Probe amount of installed memory */
-	for (i = 0; i < 4; i++) {
-		int off = bios_rd32(bios, NV04_PFB_FIFO_DATA) - 0x100000;
-
-		poke_fb(dev, fb, off, patt);
-		poke_fb(dev, fb, 0, 0);
-
-		peek_fb(dev, fb, 0);
-		peek_fb(dev, fb, 0);
-		peek_fb(dev, fb, 0);
-		peek_fb(dev, fb, 0);
-
-		if (peek_fb(dev, fb, off) == patt)
-			goto amount_found;
-	}
-
-	/* IC missing - disable the upper half memory space. */
-	bios_md32(bios, NV04_PFB_CFG0, 0x1000, 0);
-
-amount_found:
-	io_mapping_free(fb);
-	return 0;
-}
-
-static int
-nv20_init_compute_mem(struct nvbios *bios)
-{
-	struct drm_device *dev = bios->dev;
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	uint32_t mask = (dev_priv->chipset >= 0x25 ? 0x300 : 0x900);
-	uint32_t amount, off;
-	struct io_mapping *fb;
-
-	/* Map the framebuffer aperture */
-	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
-				  pci_resource_len(dev->pdev, 1));
-	if (!fb)
-		return -ENOMEM;
-
-	bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
-
-	/* Allow full addressing */
-	bios_md32(bios, NV04_PFB_CFG0, 0, mask);
-
-	amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
-	for (off = amount; off > 0x2000000; off -= 0x2000000)
-		poke_fb(dev, fb, off - 4, off);
-
-	amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
-	if (amount != peek_fb(dev, fb, amount - 4))
-		/* IC missing - disable the upper half memory space. */
-		bios_md32(bios, NV04_PFB_CFG0, mask, 0);
-
-	io_mapping_free(fb);
-	return 0;
-}
-
-static int
-init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_COMPUTE_MEM   opcode: 0x63 ('c')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * This opcode is meant to set the PFB memory config registers
-	 * appropriately so that we can correctly calculate how much VRAM it
-	 * has (on nv10 and better chipsets the amount of installed VRAM is
-	 * subsequently reported in NV_PFB_CSTATUS (0x10020C)).
-	 *
-	 * The implementation of this opcode in general consists of several
-	 * parts:
-	 *
-	 * 1) Determination of memory type and density. Only necessary for
-	 *    really old chipsets, the memory type reported by the strap bits
-	 *    (0x101000) is assumed to be accurate on nv05 and newer.
-	 *
-	 * 2) Determination of the memory bus width. Usually done by a cunning
-	 *    combination of writes to offsets 0x1c and 0x3c in the fb, and
-	 *    seeing whether the written values are read back correctly.
-	 *
-	 *    Only necessary on nv0x-nv1x and nv34, on the other cards we can
-	 *    trust the straps.
-	 *
-	 * 3) Determination of how many of the card's RAM pads have ICs
-	 *    attached, usually done by a cunning combination of writes to an
-	 *    offset slightly less than the maximum memory reported by
-	 *    NV_PFB_CSTATUS, then seeing if the test pattern can be read back.
-	 *
-	 * This appears to be a NOP on IGPs and NV4x or newer chipsets, both io
-	 * logs of the VBIOS and kmmio traces of the binary driver POSTing the
-	 * card show nothing being done for this opcode. Why is it still listed
-	 * in the table?!
-	 */
-
-	/* no iexec->execute check by design */
-
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	int ret;
-
-	if (dev_priv->chipset >= 0x40 ||
-	    dev_priv->chipset == 0x1a ||
-	    dev_priv->chipset == 0x1f)
-		ret = 0;
-	else if (dev_priv->chipset >= 0x20 &&
-		 dev_priv->chipset != 0x34)
-		ret = nv20_init_compute_mem(bios);
-	else if (dev_priv->chipset >= 0x10)
-		ret = nv10_init_compute_mem(bios);
-	else if (dev_priv->chipset >= 0x5)
-		ret = nv05_init_compute_mem(bios);
-	else
-		ret = nv04_init_compute_mem(bios);
-
-	if (ret)
-		return ret;
-
-	return 1;
-}
-
-static int
-init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_RESET   opcode: 0x65 ('e')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (32 bit): value1
-	 * offset + 9  (32 bit): value2
-	 *
-	 * Assign "value1" to "register", then assign "value2" to "register"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint32_t value1 = ROM32(bios->data[offset + 5]);
-	uint32_t value2 = ROM32(bios->data[offset + 9]);
-	uint32_t pci_nv_19, pci_nv_20;
-
-	/* no iexec->execute check by design */
-
-	pci_nv_19 = bios_rd32(bios, NV_PBUS_PCI_NV_19);
-	bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19 & ~0xf00);
-
-	bios_wr32(bios, reg, value1);
-
-	udelay(10);
-
-	bios_wr32(bios, reg, value2);
-	bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19);
-
-	pci_nv_20 = bios_rd32(bios, NV_PBUS_PCI_NV_20);
-	pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED;	/* 0xfffffffe */
-	bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20);
-
-	return 13;
-}
-
-static int
-init_configure_mem(struct nvbios *bios, uint16_t offset,
-		   struct init_exec *iexec)
-{
-	/*
-	 * INIT_CONFIGURE_MEM   opcode: 0x66 ('f')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Equivalent to INIT_DONE on bios version 3 or greater.
-	 * For early bios versions, sets up the memory registers, using values
-	 * taken from the memory init table
-	 */
-
-	/* no iexec->execute check by design */
-
-	uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
-	uint16_t seqtbloffs = bios->legacy.sdr_seq_tbl_ptr, meminitdata = meminitoffs + 6;
-	uint32_t reg, data;
-
-	if (bios->major_version > 2)
-		return 0;
-
-	bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd(
-		       bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20);
-
-	if (bios->data[meminitoffs] & 1)
-		seqtbloffs = bios->legacy.ddr_seq_tbl_ptr;
-
-	for (reg = ROM32(bios->data[seqtbloffs]);
-	     reg != 0xffffffff;
-	     reg = ROM32(bios->data[seqtbloffs += 4])) {
-
-		switch (reg) {
-		case NV04_PFB_PRE:
-			data = NV04_PFB_PRE_CMD_PRECHARGE;
-			break;
-		case NV04_PFB_PAD:
-			data = NV04_PFB_PAD_CKE_NORMAL;
-			break;
-		case NV04_PFB_REF:
-			data = NV04_PFB_REF_CMD_REFRESH;
-			break;
-		default:
-			data = ROM32(bios->data[meminitdata]);
-			meminitdata += 4;
-			if (data == 0xffffffff)
-				continue;
-		}
-
-		bios_wr32(bios, reg, data);
-	}
-
-	return 1;
-}
-
-static int
-init_configure_clk(struct nvbios *bios, uint16_t offset,
-		   struct init_exec *iexec)
-{
-	/*
-	 * INIT_CONFIGURE_CLK   opcode: 0x67 ('g')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Equivalent to INIT_DONE on bios version 3 or greater.
-	 * For early bios versions, sets up the NVClk and MClk PLLs, using
-	 * values taken from the memory init table
-	 */
-
-	/* no iexec->execute check by design */
-
-	uint16_t meminitoffs = bios->legacy.mem_init_tbl_ptr + MEM_INIT_SIZE * (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX) >> 4);
-	int clock;
-
-	if (bios->major_version > 2)
-		return 0;
-
-	clock = ROM16(bios->data[meminitoffs + 4]) * 10;
-	setPLL(bios->dev, NV_PRAMDAC_NVPLL_COEFF, clock);
-
-	clock = ROM16(bios->data[meminitoffs + 2]) * 10;
-	if (bios->data[meminitoffs] & 1) /* DDR */
-		clock *= 2;
-	setPLL(bios->dev, NV_PRAMDAC_MPLL_COEFF, clock);
-
-	return 1;
-}
-
-static int
-init_configure_preinit(struct nvbios *bios, uint16_t offset,
-		       struct init_exec *iexec)
-{
-	/*
-	 * INIT_CONFIGURE_PREINIT   opcode: 0x68 ('h')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Equivalent to INIT_DONE on bios version 3 or greater.
-	 * For early bios versions, does early init, loading ram and crystal
-	 * configuration from straps into CR3C
-	 */
-
-	/* no iexec->execute check by design */
-
-	uint32_t straps = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
-	uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & 0x40) >> 6;
-
-	if (bios->major_version > 2)
-		return 0;
-
-	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR,
-			     NV_CIO_CRE_SCRATCH4__INDEX, cr3c);
-
-	return 1;
-}
-
-static int
-init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO   opcode: 0x69 ('i')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): mask
-	 * offset + 4  (8  bit): data
-	 *
-	 * Assign ((IOVAL("crtc port") & "mask") | "data") to "crtc port"
-	 */
-
-	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t mask = bios->data[offset + 3];
-	uint8_t data = bios->data[offset + 4];
-
-	if (!iexec->execute)
-		return 5;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n",
-		offset, crtcport, mask, data);
-
-	/*
-	 * I have no idea what this does, but NVIDIA do this magic sequence
-	 * in the places where this INIT_IO happens..
-	 */
-	if (dev_priv->card_type >= NV_50 && crtcport == 0x3c3 && data == 1) {
-		int i;
-
-		bios_wr32(bios, 0x614100, (bios_rd32(
-			  bios, 0x614100) & 0x0fffffff) | 0x00800000);
-
-		bios_wr32(bios, 0x00e18c, bios_rd32(
-			  bios, 0x00e18c) | 0x00020000);
-
-		bios_wr32(bios, 0x614900, (bios_rd32(
-			  bios, 0x614900) & 0x0fffffff) | 0x00800000);
-
-		bios_wr32(bios, 0x000200, bios_rd32(
-			  bios, 0x000200) & ~0x40000000);
-
-		mdelay(10);
-
-		bios_wr32(bios, 0x00e18c, bios_rd32(
-			  bios, 0x00e18c) & ~0x00020000);
-
-		bios_wr32(bios, 0x000200, bios_rd32(
-			  bios, 0x000200) | 0x40000000);
-
-		bios_wr32(bios, 0x614100, 0x00800018);
-		bios_wr32(bios, 0x614900, 0x00800018);
-
-		mdelay(10);
-
-		bios_wr32(bios, 0x614100, 0x10000018);
-		bios_wr32(bios, 0x614900, 0x10000018);
-
-		for (i = 0; i < 3; i++)
-			bios_wr32(bios, 0x614280 + (i*0x800), bios_rd32(
-				  bios, 0x614280 + (i*0x800)) & 0xf0f0f0f0);
-
-		for (i = 0; i < 2; i++)
-			bios_wr32(bios, 0x614300 + (i*0x800), bios_rd32(
-				  bios, 0x614300 + (i*0x800)) & 0xfffff0f0);
-
-		for (i = 0; i < 3; i++)
-			bios_wr32(bios, 0x614380 + (i*0x800), bios_rd32(
-				  bios, 0x614380 + (i*0x800)) & 0xfffff0f0);
-
-		for (i = 0; i < 2; i++)
-			bios_wr32(bios, 0x614200 + (i*0x800), bios_rd32(
-				  bios, 0x614200 + (i*0x800)) & 0xfffffff0);
-
-		for (i = 0; i < 2; i++)
-			bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32(
-				  bios, 0x614108 + (i*0x800)) & 0x0fffffff);
-		return 5;
-	}
-
-	bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) |
-									data);
-	return 5;
-}
-
-static int
-init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_SUB   opcode: 0x6B ('k')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): script number
-	 *
-	 * Execute script number "script number", as a subroutine
-	 */
-
-	uint8_t sub = bios->data[offset + 1];
-
-	if (!iexec->execute)
-		return 2;
-
-	BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub);
-
-	parse_init_table(bios,
-			 ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]),
-			 iexec);
-
-	BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub);
-
-	return 2;
-}
-
-static int
-init_ram_condition(struct nvbios *bios, uint16_t offset,
-		   struct init_exec *iexec)
-{
-	/*
-	 * INIT_RAM_CONDITION   opcode: 0x6D ('m')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): mask
-	 * offset + 2  (8 bit): cmpval
-	 *
-	 * Test if (NV04_PFB_BOOT_0 & "mask") equals "cmpval".
-	 * If condition not met skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t mask = bios->data[offset + 1];
-	uint8_t cmpval = bios->data[offset + 2];
-	uint8_t data;
-
-	if (!iexec->execute)
-		return 3;
-
-	data = bios_rd32(bios, NV04_PFB_BOOT_0) & mask;
-
-	BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
-		offset, data, cmpval);
-
-	if (data == cmpval)
-		BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
-	else {
-		BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
-		iexec->execute = false;
-	}
-
-	return 3;
-}
-
-static int
-init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_NV_REG   opcode: 0x6E ('n')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (32 bit): mask
-	 * offset + 9  (32 bit): data
-	 *
-	 * Assign ((REGVAL("register") & "mask") | "data") to "register"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint32_t mask = ROM32(bios->data[offset + 5]);
-	uint32_t data = ROM32(bios->data[offset + 9]);
-
-	if (!iexec->execute)
-		return 13;
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n",
-		offset, reg, mask, data);
-
-	bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data);
-
-	return 13;
-}
-
-static int
-init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_MACRO   opcode: 0x6F ('o')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): macro number
-	 *
-	 * Look up macro index "macro number" in the macro index table.
-	 * The macro index table entry has 1 byte for the index in the macro
-	 * table, and 1 byte for the number of times to repeat the macro.
-	 * The macro table entry has 4 bytes for the register address and
-	 * 4 bytes for the value to write to that register
-	 */
-
-	uint8_t macro_index_tbl_idx = bios->data[offset + 1];
-	uint16_t tmp = bios->macro_index_tbl_ptr + (macro_index_tbl_idx * MACRO_INDEX_SIZE);
-	uint8_t macro_tbl_idx = bios->data[tmp];
-	uint8_t count = bios->data[tmp + 1];
-	uint32_t reg, data;
-	int i;
-
-	if (!iexec->execute)
-		return 2;
-
-	BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, "
-		      "Count: 0x%02X\n",
-		offset, macro_index_tbl_idx, macro_tbl_idx, count);
-
-	for (i = 0; i < count; i++) {
-		uint16_t macroentryptr = bios->macro_tbl_ptr + (macro_tbl_idx + i) * MACRO_SIZE;
-
-		reg = ROM32(bios->data[macroentryptr]);
-		data = ROM32(bios->data[macroentryptr + 4]);
-
-		bios_wr32(bios, reg, data);
-	}
-
-	return 2;
-}
-
-static int
-init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_DONE   opcode: 0x71 ('q')
-	 *
-	 * offset      (8  bit): opcode
-	 *
-	 * End the current script
-	 */
-
-	/* mild retval abuse to stop parsing this table */
-	return 0;
-}
-
-static int
-init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_RESUME   opcode: 0x72 ('r')
-	 *
-	 * offset      (8  bit): opcode
-	 *
-	 * End the current execute / no-execute condition
-	 */
-
-	if (iexec->execute)
-		return 1;
-
-	iexec->execute = true;
-	BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset);
-
-	return 1;
-}
-
-static int
-init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_TIME   opcode: 0x74 ('t')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): time
-	 *
-	 * Sleep for "time" microseconds.
-	 */
-
-	unsigned time = ROM16(bios->data[offset + 1]);
-
-	if (!iexec->execute)
-		return 3;
-
-	BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n",
-		offset, time);
-
-	if (time < 1000)
-		udelay(time);
-	else
-		mdelay((time + 900) / 1000);
-
-	return 3;
-}
-
-static int
-init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_CONDITION   opcode: 0x75 ('u')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): condition number
-	 *
-	 * Check condition "condition number" in the condition table.
-	 * If condition not met skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t cond = bios->data[offset + 1];
-
-	if (!iexec->execute)
-		return 2;
-
-	BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond);
-
-	if (bios_condition_met(bios, offset, cond))
-		BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
-	else {
-		BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
-		iexec->execute = false;
-	}
-
-	return 2;
-}
-
-static int
-init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_IO_CONDITION  opcode: 0x76
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): condition number
-	 *
-	 * Check condition "condition number" in the io condition table.
-	 * If condition not met skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t cond = bios->data[offset + 1];
-
-	if (!iexec->execute)
-		return 2;
-
-	BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond);
-
-	if (io_condition_met(bios, offset, cond))
-		BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset);
-	else {
-		BIOSLOG(bios, "0x%04X: Condition not fulfilled -- skipping following commands\n", offset);
-		iexec->execute = false;
-	}
-
-	return 2;
-}
-
-static int
-init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_INDEX_IO   opcode: 0x78 ('x')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (16 bit): CRTC port
-	 * offset + 3  (8  bit): CRTC index
-	 * offset + 4  (8  bit): mask
-	 * offset + 5  (8  bit): data
-	 *
-	 * Read value at index "CRTC index" on "CRTC port", AND with "mask",
-	 * OR with "data", write-back
-	 */
-
-	uint16_t crtcport = ROM16(bios->data[offset + 1]);
-	uint8_t crtcindex = bios->data[offset + 3];
-	uint8_t mask = bios->data[offset + 4];
-	uint8_t data = bios->data[offset + 5];
-	uint8_t value;
-
-	if (!iexec->execute)
-		return 6;
-
-	BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, "
-		      "Data: 0x%02X\n",
-		offset, crtcport, crtcindex, mask, data);
-
-	value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data;
-	bios_idxprt_wr(bios, crtcport, crtcindex, value);
-
-	return 6;
-}
-
-static int
-init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_PLL   opcode: 0x79 ('y')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (16 bit): freq
-	 *
-	 * Set PLL register "register" to coefficients for frequency (10kHz)
-	 * "freq"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint16_t freq = ROM16(bios->data[offset + 5]);
-
-	if (!iexec->execute)
-		return 7;
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq);
-
-	setPLL(bios->dev, reg, freq * 10);
-
-	return 7;
-}
-
-static int
-init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_REG   opcode: 0x7A ('z')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (32 bit): value
-	 *
-	 * Assign "value" to "register"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint32_t value = ROM32(bios->data[offset + 5]);
-
-	if (!iexec->execute)
-		return 9;
-
-	if (reg == 0x000200)
-		value |= 1;
-
-	bios_wr32(bios, reg, value);
-
-	return 9;
-}
-
-static int
-init_ram_restrict_pll(struct nvbios *bios, uint16_t offset,
-		      struct init_exec *iexec)
-{
-	/*
-	 * INIT_RAM_RESTRICT_PLL   opcode: 0x87 ('')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): PLL type
-	 * offset + 2 (32 bit): frequency 0
-	 *
-	 * Uses the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
-	 * ram_restrict_table_ptr.  The value read from there is used to select
-	 * a frequency from the table starting at 'frequency 0' to be
-	 * programmed into the PLL corresponding to 'type'.
-	 *
-	 * The PLL limits table on cards using this opcode has a mapping of
-	 * 'type' to the relevant registers.
-	 */
-
-	struct drm_device *dev = bios->dev;
-	uint32_t strap = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) & 0x0000003c) >> 2;
-	uint8_t index = bios->data[bios->ram_restrict_tbl_ptr + strap];
-	uint8_t type = bios->data[offset + 1];
-	uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]);
-	uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry;
-	int len = 2 + bios->ram_restrict_group_count * 4;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) {
-		NV_ERROR(dev, "PLL limits table not version 3.x\n");
-		return len; /* deliberate, allow default clocks to remain */
-	}
-
-	entry = pll_limits + pll_limits[1];
-	for (i = 0; i < pll_limits[3]; i++, entry += pll_limits[2]) {
-		if (entry[0] == type) {
-			uint32_t reg = ROM32(entry[3]);
-
-			BIOSLOG(bios, "0x%04X: "
-				      "Type %02x Reg 0x%08x Freq %dKHz\n",
-				offset, type, reg, freq);
-
-			setPLL(bios->dev, reg, freq);
-			return len;
-		}
-	}
-
-	NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type);
-	return len;
-}
-
-static int
-init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_8C   opcode: 0x8C ('')
-	 *
-	 * NOP so far....
-	 *
-	 */
-
-	return 1;
-}
-
-static int
-init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_8D   opcode: 0x8D ('')
-	 *
-	 * NOP so far....
-	 *
-	 */
-
-	return 1;
-}
-
-static int
-init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_GPIO   opcode: 0x8E ('')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Loop over all entries in the DCB GPIO table, and initialise
-	 * each GPIO according to various values listed in each entry
-	 */
-
-	if (iexec->execute && bios->execute)
-		nouveau_gpio_reset(bios->dev);
-
-	return 1;
-}
-
-static int
-init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset,
-			       struct init_exec *iexec)
-{
-	/*
-	 * INIT_RAM_RESTRICT_ZM_REG_GROUP   opcode: 0x8F ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): reg
-	 * offset + 5  (8  bit): regincrement
-	 * offset + 6  (8  bit): count
-	 * offset + 7  (32 bit): value 1,1
-	 * ...
-	 *
-	 * Use the RAMCFG strap of PEXTDEV_BOOT as an index into the table at
-	 * ram_restrict_table_ptr. The value read from here is 'n', and
-	 * "value 1,n" gets written to "reg". This repeats "count" times and on
-	 * each iteration 'm', "reg" increases by "regincrement" and
-	 * "value m,n" is used. The extent of n is limited by a number read
-	 * from the 'M' BIT table, herein called "blocklen"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint8_t regincrement = bios->data[offset + 5];
-	uint8_t count = bios->data[offset + 6];
-	uint32_t strap_ramcfg, data;
-	/* previously set by 'M' BIT table */
-	uint16_t blocklen = bios->ram_restrict_group_count * 4;
-	int len = 7 + count * blocklen;
-	uint8_t index;
-	int i;
-
-	/* critical! to know the length of the opcode */;
-	if (!blocklen) {
-		NV_ERROR(bios->dev,
-			 "0x%04X: Zero block length - has the M table "
-			 "been parsed?\n", offset);
-		return -EINVAL;
-	}
-
-	if (!iexec->execute)
-		return len;
-
-	strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf;
-	index = bios->data[bios->ram_restrict_tbl_ptr + strap_ramcfg];
-
-	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, RegIncrement: 0x%02X, "
-		      "Count: 0x%02X, StrapRamCfg: 0x%02X, Index: 0x%02X\n",
-		offset, reg, regincrement, count, strap_ramcfg, index);
-
-	for (i = 0; i < count; i++) {
-		data = ROM32(bios->data[offset + 7 + index * 4 + blocklen * i]);
-
-		bios_wr32(bios, reg, data);
-
-		reg += regincrement;
-	}
-
-	return len;
-}
-
-static int
-init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_COPY_ZM_REG   opcode: 0x90 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): src reg
-	 * offset + 5  (32 bit): dst reg
-	 *
-	 * Put contents of "src reg" into "dst reg"
-	 */
-
-	uint32_t srcreg = ROM32(bios->data[offset + 1]);
-	uint32_t dstreg = ROM32(bios->data[offset + 5]);
-
-	if (!iexec->execute)
-		return 9;
-
-	bios_wr32(bios, dstreg, bios_rd32(bios, srcreg));
-
-	return 9;
-}
-
-static int
-init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset,
-			       struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_REG_GROUP_ADDRESS_LATCHED   opcode: 0x91 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): dst reg
-	 * offset + 5  (8  bit): count
-	 * offset + 6  (32 bit): data 1
-	 * ...
-	 *
-	 * For each of "count" values write "data n" to "dst reg"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint8_t count = bios->data[offset + 5];
-	int len = 6 + count * 4;
-	int i;
-
-	if (!iexec->execute)
-		return len;
-
-	for (i = 0; i < count; i++) {
-		uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]);
-		bios_wr32(bios, reg, data);
-	}
-
-	return len;
-}
-
-static int
-init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_RESERVED   opcode: 0x92 ('')
-	 *
-	 * offset      (8 bit): opcode
-	 *
-	 * Seemingly does nothing
-	 */
-
-	return 1;
-}
-
-static int
-init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_96   opcode: 0x96 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): sreg
-	 * offset + 5  (8  bit): sshift
-	 * offset + 6  (8  bit): smask
-	 * offset + 7  (8  bit): index
-	 * offset + 8  (32 bit): reg
-	 * offset + 12 (32 bit): mask
-	 * offset + 16 (8  bit): shift
-	 *
-	 */
-
-	uint16_t xlatptr = bios->init96_tbl_ptr + (bios->data[offset + 7] * 2);
-	uint32_t reg = ROM32(bios->data[offset + 8]);
-	uint32_t mask = ROM32(bios->data[offset + 12]);
-	uint32_t val;
-
-	val = bios_rd32(bios, ROM32(bios->data[offset + 1]));
-	if (bios->data[offset + 5] < 0x80)
-		val >>= bios->data[offset + 5];
-	else
-		val <<= (0x100 - bios->data[offset + 5]);
-	val &= bios->data[offset + 6];
-
-	val   = bios->data[ROM16(bios->data[xlatptr]) + val];
-	val <<= bios->data[offset + 16];
-
-	if (!iexec->execute)
-		return 17;
-
-	bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val);
-	return 17;
-}
-
-static int
-init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_97   opcode: 0x97 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): register
-	 * offset + 5  (32 bit): mask
-	 * offset + 9  (32 bit): value
-	 *
-	 * Adds "value" to "register" preserving the fields specified
-	 * by "mask"
-	 */
-
-	uint32_t reg = ROM32(bios->data[offset + 1]);
-	uint32_t mask = ROM32(bios->data[offset + 5]);
-	uint32_t add = ROM32(bios->data[offset + 9]);
-	uint32_t val;
-
-	val = bios_rd32(bios, reg);
-	val = (val & mask) | ((val + add) & ~mask);
-
-	if (!iexec->execute)
-		return 13;
-
-	bios_wr32(bios, reg, val);
-	return 13;
-}
-
-static int
-init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_AUXCH   opcode: 0x98 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): address
-	 * offset + 5  (8  bit): count
-	 * offset + 6  (8  bit): mask 0
-	 * offset + 7  (8  bit): data 0
-	 *  ...
-	 *
-	 */
-
-	struct drm_device *dev = bios->dev;
-	struct nouveau_i2c_port *auxch;
-	uint32_t addr = ROM32(bios->data[offset + 1]);
-	uint8_t count = bios->data[offset + 5];
-	int len = 6 + count * 2;
-	int ret, i;
-
-	if (!bios->display.output) {
-		NV_ERROR(dev, "INIT_AUXCH: no active output\n");
-		return len;
-	}
-
-	auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
-	if (!auxch) {
-		NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n",
-			 bios->display.output->i2c_index);
-		return len;
-	}
-
-	if (!iexec->execute)
-		return len;
-
-	offset += 6;
-	for (i = 0; i < count; i++, offset += 2) {
-		uint8_t data;
-
-		ret = auxch_rd(dev, auxch, addr, &data, 1);
-		if (ret) {
-			NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret);
-			return len;
-		}
-
-		data &= bios->data[offset + 0];
-		data |= bios->data[offset + 1];
-
-		ret = auxch_wr(dev, auxch, addr, &data, 1);
-		if (ret) {
-			NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret);
-			return len;
-		}
-	}
-
-	return len;
-}
-
-static int
-init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_ZM_AUXCH   opcode: 0x99 ('')
-	 *
-	 * offset      (8  bit): opcode
-	 * offset + 1  (32 bit): address
-	 * offset + 5  (8  bit): count
-	 * offset + 6  (8  bit): data 0
-	 *  ...
-	 *
-	 */
-
-	struct drm_device *dev = bios->dev;
-	struct nouveau_i2c_port *auxch;
-	uint32_t addr = ROM32(bios->data[offset + 1]);
-	uint8_t count = bios->data[offset + 5];
-	int len = 6 + count;
-	int ret, i;
-
-	if (!bios->display.output) {
-		NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n");
-		return len;
-	}
-
-	auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
-	if (!auxch) {
-		NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n",
-			 bios->display.output->i2c_index);
-		return len;
-	}
-
-	if (!iexec->execute)
-		return len;
-
-	offset += 6;
-	for (i = 0; i < count; i++, offset++) {
-		ret = auxch_wr(dev, auxch, addr, &bios->data[offset], 1);
-		if (ret) {
-			NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret);
-			return len;
-		}
-	}
-
-	return len;
-}
-
-static int
-init_i2c_long_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * INIT_I2C_LONG_IF   opcode: 0x9A ('')
-	 *
-	 * offset      (8 bit): opcode
-	 * offset + 1  (8 bit): DCB I2C table entry index
-	 * offset + 2  (8 bit): I2C slave address
-	 * offset + 3  (16 bit): I2C register
-	 * offset + 5  (8 bit): mask
-	 * offset + 6  (8 bit): data
-	 *
-	 * Read the register given by "I2C register" on the device addressed
-	 * by "I2C slave address" on the I2C bus given by "DCB I2C table
-	 * entry index". Compare the result AND "mask" to "data".
-	 * If they're not equal, skip subsequent opcodes until condition is
-	 * inverted (INIT_NOT), or we hit INIT_RESUME
-	 */
-
-	uint8_t i2c_index = bios->data[offset + 1];
-	uint8_t i2c_address = bios->data[offset + 2] >> 1;
-	uint8_t reglo = bios->data[offset + 3];
-	uint8_t reghi = bios->data[offset + 4];
-	uint8_t mask = bios->data[offset + 5];
-	uint8_t data = bios->data[offset + 6];
-	struct nouveau_i2c_port *chan;
-	uint8_t buf0[2] = { reghi, reglo };
-	uint8_t buf1[1];
-	struct i2c_msg msg[2] = {
-		{ i2c_address, 0, 1, buf0 },
-		{ i2c_address, I2C_M_RD, 1, buf1 },
-	};
-	int ret;
-
-	/* no execute check by design */
-
-	BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X\n",
-		offset, i2c_index, i2c_address);
-
-	chan = init_i2c_device_find(bios->dev, i2c_index);
-	if (!chan)
-		return -ENODEV;
-
-
-	ret = i2c_transfer(nouveau_i2c_adapter(chan), msg, 2);
-	if (ret < 0) {
-		BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: [no device], "
-			      "Mask: 0x%02X, Data: 0x%02X\n",
-			offset, reghi, reglo, mask, data);
-		iexec->execute = 0;
-		return 7;
-	}
-
-	BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X:0x%02X, Value: 0x%02X, "
-		      "Mask: 0x%02X, Data: 0x%02X\n",
-		offset, reghi, reglo, buf1[0], mask, data);
-
-	iexec->execute = ((buf1[0] & mask) == data);
-
-	return 7;
-}
-
-static struct init_tbl_entry itbl_entry[] = {
-	/* command name                       , id  , length  , offset  , mult    , command handler                 */
-	/* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */
-	{ "INIT_IO_RESTRICT_PROG"             , 0x32, init_io_restrict_prog           },
-	{ "INIT_REPEAT"                       , 0x33, init_repeat                     },
-	{ "INIT_IO_RESTRICT_PLL"              , 0x34, init_io_restrict_pll            },
-	{ "INIT_END_REPEAT"                   , 0x36, init_end_repeat                 },
-	{ "INIT_COPY"                         , 0x37, init_copy                       },
-	{ "INIT_NOT"                          , 0x38, init_not                        },
-	{ "INIT_IO_FLAG_CONDITION"            , 0x39, init_io_flag_condition          },
-	{ "INIT_DP_CONDITION"                 , 0x3A, init_dp_condition               },
-	{ "INIT_OP_3B"                        , 0x3B, init_op_3b                      },
-	{ "INIT_OP_3C"                        , 0x3C, init_op_3c                      },
-	{ "INIT_INDEX_ADDRESS_LATCHED"        , 0x49, init_idx_addr_latched           },
-	{ "INIT_IO_RESTRICT_PLL2"             , 0x4A, init_io_restrict_pll2           },
-	{ "INIT_PLL2"                         , 0x4B, init_pll2                       },
-	{ "INIT_I2C_BYTE"                     , 0x4C, init_i2c_byte                   },
-	{ "INIT_ZM_I2C_BYTE"                  , 0x4D, init_zm_i2c_byte                },
-	{ "INIT_ZM_I2C"                       , 0x4E, init_zm_i2c                     },
-	{ "INIT_TMDS"                         , 0x4F, init_tmds                       },
-	{ "INIT_ZM_TMDS_GROUP"                , 0x50, init_zm_tmds_group              },
-	{ "INIT_CR_INDEX_ADDRESS_LATCHED"     , 0x51, init_cr_idx_adr_latch           },
-	{ "INIT_CR"                           , 0x52, init_cr                         },
-	{ "INIT_ZM_CR"                        , 0x53, init_zm_cr                      },
-	{ "INIT_ZM_CR_GROUP"                  , 0x54, init_zm_cr_group                },
-	{ "INIT_CONDITION_TIME"               , 0x56, init_condition_time             },
-	{ "INIT_LTIME"                        , 0x57, init_ltime                      },
-	{ "INIT_ZM_REG_SEQUENCE"              , 0x58, init_zm_reg_sequence            },
-	/* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
-	{ "INIT_SUB_DIRECT"                   , 0x5B, init_sub_direct                 },
-	{ "INIT_JUMP"                         , 0x5C, init_jump                       },
-	{ "INIT_I2C_IF"                       , 0x5E, init_i2c_if                     },
-	{ "INIT_COPY_NV_REG"                  , 0x5F, init_copy_nv_reg                },
-	{ "INIT_ZM_INDEX_IO"                  , 0x62, init_zm_index_io                },
-	{ "INIT_COMPUTE_MEM"                  , 0x63, init_compute_mem                },
-	{ "INIT_RESET"                        , 0x65, init_reset                      },
-	{ "INIT_CONFIGURE_MEM"                , 0x66, init_configure_mem              },
-	{ "INIT_CONFIGURE_CLK"                , 0x67, init_configure_clk              },
-	{ "INIT_CONFIGURE_PREINIT"            , 0x68, init_configure_preinit          },
-	{ "INIT_IO"                           , 0x69, init_io                         },
-	{ "INIT_SUB"                          , 0x6B, init_sub                        },
-	{ "INIT_RAM_CONDITION"                , 0x6D, init_ram_condition              },
-	{ "INIT_NV_REG"                       , 0x6E, init_nv_reg                     },
-	{ "INIT_MACRO"                        , 0x6F, init_macro                      },
-	{ "INIT_DONE"                         , 0x71, init_done                       },
-	{ "INIT_RESUME"                       , 0x72, init_resume                     },
-	/* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */
-	{ "INIT_TIME"                         , 0x74, init_time                       },
-	{ "INIT_CONDITION"                    , 0x75, init_condition                  },
-	{ "INIT_IO_CONDITION"                 , 0x76, init_io_condition               },
-	{ "INIT_INDEX_IO"                     , 0x78, init_index_io                   },
-	{ "INIT_PLL"                          , 0x79, init_pll                        },
-	{ "INIT_ZM_REG"                       , 0x7A, init_zm_reg                     },
-	{ "INIT_RAM_RESTRICT_PLL"             , 0x87, init_ram_restrict_pll           },
-	{ "INIT_8C"                           , 0x8C, init_8c                         },
-	{ "INIT_8D"                           , 0x8D, init_8d                         },
-	{ "INIT_GPIO"                         , 0x8E, init_gpio                       },
-	{ "INIT_RAM_RESTRICT_ZM_REG_GROUP"    , 0x8F, init_ram_restrict_zm_reg_group  },
-	{ "INIT_COPY_ZM_REG"                  , 0x90, init_copy_zm_reg                },
-	{ "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched  },
-	{ "INIT_RESERVED"                     , 0x92, init_reserved                   },
-	{ "INIT_96"                           , 0x96, init_96                         },
-	{ "INIT_97"                           , 0x97, init_97                         },
-	{ "INIT_AUXCH"                        , 0x98, init_auxch                      },
-	{ "INIT_ZM_AUXCH"                     , 0x99, init_zm_auxch                   },
-	{ "INIT_I2C_LONG_IF"                  , 0x9A, init_i2c_long_if                },
-	{ NULL                                , 0   , NULL                            }
-};
-
-#define MAX_TABLE_OPS 1000
-
-static int
-parse_init_table(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
-{
-	/*
-	 * Parses all commands in an init table.
-	 *
-	 * We start out executing all commands found in the init table. Some
-	 * opcodes may change the status of iexec->execute to SKIP, which will
-	 * cause the following opcodes to perform no operation until the value
-	 * is changed back to EXECUTE.
-	 */
-
-	int count = 0, i, ret;
-	uint8_t id;
-
-	/* catch NULL script pointers */
-	if (offset == 0)
-		return 0;
-
-	/*
-	 * Loop until INIT_DONE causes us to break out of the loop
-	 * (or until offset > bios length just in case... )
-	 * (and no more than MAX_TABLE_OPS iterations, just in case... )
-	 */
-	while ((offset < bios->length) && (count++ < MAX_TABLE_OPS)) {
-		id = bios->data[offset];
-
-		/* Find matching id in itbl_entry */
-		for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != id); i++)
-			;
-
-		if (!itbl_entry[i].name) {
-			NV_ERROR(bios->dev,
-				 "0x%04X: Init table command not found: "
-				 "0x%02X\n", offset, id);
-			return -ENOENT;
-		}
-
-		BIOSLOG(bios, "0x%04X: [ (0x%02X) - %s ]\n", offset,
-			itbl_entry[i].id, itbl_entry[i].name);
-
-		/* execute eventual command handler */
-		ret = (*itbl_entry[i].handler)(bios, offset, iexec);
-		if (ret < 0) {
-			NV_ERROR(bios->dev, "0x%04X: Failed parsing init "
-				 "table opcode: %s %d\n", offset,
-				 itbl_entry[i].name, ret);
-		}
-
-		if (ret <= 0)
-			break;
-
-		/*
-		 * Add the offset of the current command including all data
-		 * of that command. The offset will then be pointing on the
-		 * next op code.
-		 */
-		offset += ret;
-	}
-
-	if (offset >= bios->length)
-		NV_WARN(bios->dev,
-			"Offset 0x%04X greater than known bios image length.  "
-			"Corrupt image?\n", offset);
-	if (count >= MAX_TABLE_OPS)
-		NV_WARN(bios->dev,
-			"More than %d opcodes to a table is unlikely, "
-			"is the bios image corrupt?\n", MAX_TABLE_OPS);
-
-	return 0;
-}
-
-static void
-parse_init_tables(struct nvbios *bios)
-{
-	/* Loops and calls parse_init_table() for each present table. */
-
-	int i = 0;
-	uint16_t table;
-	struct init_exec iexec = {true, false};
-
-	if (bios->old_style_init) {
-		if (bios->init_script_tbls_ptr)
-			parse_init_table(bios, bios->init_script_tbls_ptr, &iexec);
-		if (bios->extra_init_script_tbl_ptr)
-			parse_init_table(bios, bios->extra_init_script_tbl_ptr, &iexec);
-
-		return;
-	}
-
-	while ((table = ROM16(bios->data[bios->init_script_tbls_ptr + i]))) {
-		NV_INFO(bios->dev,
-			"Parsing VBIOS init table %d at offset 0x%04X\n",
-			i / 2, table);
-		BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", table);
-
-		parse_init_table(bios, table, &iexec);
-		i += 2;
-	}
-}
-
 static uint16_t clkcmptable(struct nvbios *bios, uint16_t clktable, int pxclk)
 {
 	int compare_record_len, i = 0;
@@ -3458,28 +92,22 @@
 
 static void
 run_digital_op_script(struct drm_device *dev, uint16_t scriptptr,
-		      struct dcb_entry *dcbent, int head, bool dl)
+		      struct dcb_output *dcbent, int head, bool dl)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	struct init_exec iexec = {true, false};
-
 	NV_TRACE(dev, "0x%04X: Parsing digital output script table\n",
 		 scriptptr);
-	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_44,
-		       head ? NV_CIO_CRE_44_HEADB : NV_CIO_CRE_44_HEADA);
-	/* note: if dcb entries have been merged, index may be misleading */
-	NVWriteVgaCrtc5758(dev, head, 0, dcbent->index);
-	parse_init_table(bios, scriptptr, &iexec);
+	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_44, head ? NV_CIO_CRE_44_HEADB :
+					         NV_CIO_CRE_44_HEADA);
+	nouveau_bios_run_init_table(dev, scriptptr, dcbent, head);
 
 	nv04_dfp_bind_head(dev, dcbent, head, dl);
 }
 
-static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script)
+static int call_lvds_manufacturer_script(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->vbios;
-	uint8_t sub = bios->data[bios->fp.xlated_entry + script] + (bios->fp.link_c_increment && dcbent->or & OUTPUT_C ? 1 : 0);
+	uint8_t sub = bios->data[bios->fp.xlated_entry + script] + (bios->fp.link_c_increment && dcbent->or & DCB_OUTPUT_C ? 1 : 0);
 	uint16_t scriptofs = ROM16(bios->data[bios->init_script_tbls_ptr + sub * 2]);
 
 	if (!bios->fp.xlated_entry || !sub || !scriptofs)
@@ -3502,7 +130,7 @@
 	return 0;
 }
 
-static int run_lvds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
+static int run_lvds_table(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script, int pxclk)
 {
 	/*
 	 * The BIT LVDS table's header has the information to setup the
@@ -3575,7 +203,7 @@
 	return 0;
 }
 
-int call_lvds_script(struct drm_device *dev, struct dcb_entry *dcbent, int head, enum LVDS_script script, int pxclk)
+int call_lvds_script(struct drm_device *dev, struct dcb_output *dcbent, int head, enum LVDS_script script, int pxclk)
 {
 	/*
 	 * LVDS operations are multiplexed in an effort to present a single API
@@ -3606,7 +234,7 @@
 	NV_TRACE(dev, "Calling LVDS script %d:\n", script);
 
 	/* don't let script change pll->head binding */
-	sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
+	sel_clk_binding = nv_rd32(dev, NV_PRAMDAC_SEL_CLK) & 0x50000;
 
 	if (lvds_ver < 0x30)
 		ret = call_lvds_manufacturer_script(dev, dcbent, head, script);
@@ -3700,9 +328,9 @@
 		return NVReadVgaCrtc5758(dev, 0, 0xf) & 0xf;
 
 	if (dev_priv->card_type >= NV_50)
-		return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 24) & 0xf;
+		return (nv_rd32(dev, NV_PEXTDEV_BOOT_0) >> 24) & 0xf;
 	else
-		return (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 16) & 0xf;
+		return (nv_rd32(dev, NV_PEXTDEV_BOOT_0) >> 16) & 0xf;
 }
 
 static int parse_fp_mode_table(struct drm_device *dev, struct nvbios *bios)
@@ -3994,7 +622,7 @@
  * This function returns true if a particular DCB entry matches.
  */
 bool
-bios_encoder_match(struct dcb_entry *dcb, u32 hash)
+bios_encoder_match(struct dcb_output *dcb, u32 hash)
 {
 	if ((hash & 0x000000f0) != (dcb->location << 4))
 		return false;
@@ -4004,9 +632,9 @@
 		return false;
 
 	switch (dcb->type) {
-	case OUTPUT_TMDS:
-	case OUTPUT_LVDS:
-	case OUTPUT_DP:
+	case DCB_OUTPUT_TMDS:
+	case DCB_OUTPUT_LVDS:
+	case DCB_OUTPUT_DP:
 		if (hash & 0x00c00000) {
 			if (!(hash & (dcb->sorconf.link << 22)))
 				return false;
@@ -4018,7 +646,7 @@
 
 int
 nouveau_bios_run_display_table(struct drm_device *dev, u16 type, int pclk,
-			       struct dcb_entry *dcbent, int crtc)
+			       struct dcb_output *dcbent, int crtc)
 {
 	/*
 	 * The display script table is located by the BIT 'U' table.
@@ -4188,7 +816,7 @@
 }
 
 
-int run_tmds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, int pxclk)
+int run_tmds_table(struct drm_device *dev, struct dcb_output *dcbent, int head, int pxclk)
 {
 	/*
 	 * the pxclk parameter is in kHz
@@ -4233,7 +861,7 @@
 	}
 
 	/* don't let script change pll->head binding */
-	sel_clk_binding = bios_rd32(bios, NV_PRAMDAC_SEL_CLK) & 0x50000;
+	sel_clk_binding = nv_rd32(dev, NV_PRAMDAC_SEL_CLK) & 0x50000;
 	run_digital_op_script(dev, scriptptr, dcbent, head, pxclk >= 165000);
 	sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK) & ~0x50000;
 	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, sel_clk | sel_clk_binding);
@@ -4967,9 +1595,9 @@
 		if (ROM32(outp[0]) == 0xffffffff)
 			break; /* seen on an NV17 with DCB v2.0 */
 
-		if ((outp[0] & 0x0f) == OUTPUT_UNUSED)
+		if ((outp[0] & 0x0f) == DCB_OUTPUT_UNUSED)
 			continue;
-		if ((outp[0] & 0x0f) == OUTPUT_EOL)
+		if ((outp[0] & 0x0f) == DCB_OUTPUT_EOL)
 			break;
 
 		ret = exec(dev, data, idx, outp);
@@ -4981,7 +1609,7 @@
 }
 
 u8 *
-dcb_conntab(struct drm_device *dev)
+olddcb_conntab(struct drm_device *dev)
 {
 	u8 *dcb = olddcb_table(dev);
 	if (dcb && dcb[0] >= 0x30 && dcb[1] >= 0x16) {
@@ -4993,19 +1621,19 @@
 }
 
 u8 *
-dcb_conn(struct drm_device *dev, u8 idx)
+olddcb_conn(struct drm_device *dev, u8 idx)
 {
-	u8 *conntab = dcb_conntab(dev);
+	u8 *conntab = olddcb_conntab(dev);
 	if (conntab && idx < conntab[2])
 		return conntab + conntab[1] + (idx * conntab[3]);
 	return NULL;
 }
 
-static struct dcb_entry *new_dcb_entry(struct dcb_table *dcb)
+static struct dcb_output *new_dcb_entry(struct dcb_table *dcb)
 {
-	struct dcb_entry *entry = &dcb->entry[dcb->entries];
+	struct dcb_output *entry = &dcb->entry[dcb->entries];
 
-	memset(entry, 0, sizeof(struct dcb_entry));
+	memset(entry, 0, sizeof(struct dcb_output));
 	entry->index = dcb->entries++;
 
 	return entry;
@@ -5014,19 +1642,19 @@
 static void fabricate_dcb_output(struct dcb_table *dcb, int type, int i2c,
 				 int heads, int or)
 {
-	struct dcb_entry *entry = new_dcb_entry(dcb);
+	struct dcb_output *entry = new_dcb_entry(dcb);
 
 	entry->type = type;
 	entry->i2c_index = i2c;
 	entry->heads = heads;
-	if (type != OUTPUT_ANALOG)
+	if (type != DCB_OUTPUT_ANALOG)
 		entry->location = !DCB_LOC_ON_CHIP; /* ie OFF CHIP */
 	entry->or = or;
 }
 
 static bool
 parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
-		  uint32_t conn, uint32_t conf, struct dcb_entry *entry)
+		  uint32_t conn, uint32_t conf, struct dcb_output *entry)
 {
 	entry->type = conn & 0xf;
 	entry->i2c_index = (conn >> 4) & 0xf;
@@ -5037,7 +1665,7 @@
 	entry->or = (conn >> 24) & 0xf;
 
 	switch (entry->type) {
-	case OUTPUT_ANALOG:
+	case DCB_OUTPUT_ANALOG:
 		/*
 		 * Although the rest of a CRT conf dword is usually
 		 * zeros, mac biosen have stuff there so we must mask
@@ -5046,7 +1674,7 @@
 					 (conf & 0xffff) * 10 :
 					 (conf & 0xff) * 10000;
 		break;
-	case OUTPUT_LVDS:
+	case DCB_OUTPUT_LVDS:
 		{
 		uint32_t mask;
 		if (conf & 0x1)
@@ -5086,7 +1714,7 @@
 		}
 		break;
 		}
-	case OUTPUT_TV:
+	case DCB_OUTPUT_TV:
 	{
 		if (dcb->version >= 0x30)
 			entry->tvconf.has_component_output = conf & (0x8 << 4);
@@ -5095,7 +1723,7 @@
 
 		break;
 	}
-	case OUTPUT_DP:
+	case DCB_OUTPUT_DP:
 		entry->dpconf.sor.link = (conf & 0x00000030) >> 4;
 		switch ((conf & 0x00e00000) >> 21) {
 		case 0:
@@ -5117,7 +1745,7 @@
 			break;
 		}
 		break;
-	case OUTPUT_TMDS:
+	case DCB_OUTPUT_TMDS:
 		if (dcb->version >= 0x40)
 			entry->tmdsconf.sor.link = (conf & 0x00000030) >> 4;
 		else if (dcb->version >= 0x30)
@@ -5126,7 +1754,7 @@
 			entry->tmdsconf.slave_addr = (conf & 0x00000070) >> 4;
 
 		break;
-	case OUTPUT_EOL:
+	case DCB_OUTPUT_EOL:
 		/* weird g80 mobile type that "nv" treats as a terminator */
 		dcb->entries--;
 		return false;
@@ -5153,24 +1781,24 @@
 
 static bool
 parse_dcb15_entry(struct drm_device *dev, struct dcb_table *dcb,
-		  uint32_t conn, uint32_t conf, struct dcb_entry *entry)
+		  uint32_t conn, uint32_t conf, struct dcb_output *entry)
 {
 	switch (conn & 0x0000000f) {
 	case 0:
-		entry->type = OUTPUT_ANALOG;
+		entry->type = DCB_OUTPUT_ANALOG;
 		break;
 	case 1:
-		entry->type = OUTPUT_TV;
+		entry->type = DCB_OUTPUT_TV;
 		break;
 	case 2:
 	case 4:
 		if (conn & 0x10)
-			entry->type = OUTPUT_LVDS;
+			entry->type = DCB_OUTPUT_LVDS;
 		else
-			entry->type = OUTPUT_TMDS;
+			entry->type = DCB_OUTPUT_TMDS;
 		break;
 	case 3:
-		entry->type = OUTPUT_LVDS;
+		entry->type = DCB_OUTPUT_LVDS;
 		break;
 	default:
 		NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
@@ -5185,13 +1813,13 @@
 	entry->duallink_possible = false;
 
 	switch (entry->type) {
-	case OUTPUT_ANALOG:
+	case DCB_OUTPUT_ANALOG:
 		entry->crtconf.maxfreq = (conf & 0xffff) * 10;
 		break;
-	case OUTPUT_TV:
+	case DCB_OUTPUT_TV:
 		entry->tvconf.has_component_output = false;
 		break;
-	case OUTPUT_LVDS:
+	case DCB_OUTPUT_LVDS:
 		if ((conn & 0x00003f00) >> 8 != 0x10)
 			entry->lvdsconf.use_straps_for_mode = true;
 		entry->lvdsconf.use_power_scripts = true;
@@ -5215,11 +1843,11 @@
 	int i, newentries = 0;
 
 	for (i = 0; i < dcb->entries; i++) {
-		struct dcb_entry *ient = &dcb->entry[i];
+		struct dcb_output *ient = &dcb->entry[i];
 		int j;
 
 		for (j = i + 1; j < dcb->entries; j++) {
-			struct dcb_entry *jent = &dcb->entry[j];
+			struct dcb_output *jent = &dcb->entry[j];
 
 			if (jent->type == 100) /* already merged entry */
 				continue;
@@ -5282,7 +1910,7 @@
 	 */
 	if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) {
 		if (*conn == 0xf2005014 && *conf == 0xffffffff) {
-			fabricate_dcb_output(dcb, OUTPUT_TMDS, 1, 1, 1);
+			fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1);
 			return false;
 		}
 	}
@@ -5368,24 +1996,24 @@
 #ifdef __powerpc__
 	/* Apple iMac G4 NV17 */
 	if (of_machine_is_compatible("PowerMac4,5")) {
-		fabricate_dcb_output(dcb, OUTPUT_TMDS, 0, all_heads, 1);
-		fabricate_dcb_output(dcb, OUTPUT_ANALOG, 1, all_heads, 2);
+		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1);
+		fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2);
 		return;
 	}
 #endif
 
 	/* Make up some sane defaults */
-	fabricate_dcb_output(dcb, OUTPUT_ANALOG,
+	fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG,
 			     bios->legacy.i2c_indices.crt, 1, 1);
 
 	if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
-		fabricate_dcb_output(dcb, OUTPUT_TV,
+		fabricate_dcb_output(dcb, DCB_OUTPUT_TV,
 				     bios->legacy.i2c_indices.tv,
 				     all_heads, 0);
 
 	else if (bios->tmds.output0_script_ptr ||
 		 bios->tmds.output1_script_ptr)
-		fabricate_dcb_output(dcb, OUTPUT_TMDS,
+		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS,
 				     bios->legacy.i2c_indices.panel,
 				     all_heads, 1);
 }
@@ -5400,7 +2028,7 @@
 	bool ret;
 
 	if (apply_dcb_encoder_quirks(dev, idx, &conn, &conf)) {
-		struct dcb_entry *entry = new_dcb_entry(dcb);
+		struct dcb_output *entry = new_dcb_entry(dcb);
 
 		NV_TRACEWARN(dev, "DCB outp %02d: %08x %08x\n", idx, conn, conf);
 
@@ -5415,7 +2043,7 @@
 		 * are cards with bogus values (nv31m in bug 23212),
 		 * and it's otherwise useless.
 		 */
-		if (entry->type == OUTPUT_TV &&
+		if (entry->type == DCB_OUTPUT_TV &&
 		    entry->location == DCB_LOC_ON_CHIP)
 			entry->i2c_index = 0x0f;
 	}
@@ -5463,7 +2091,7 @@
 	 * table - just in case it has random, rather than stub, entries.
 	 */
 	if (i > 1) {
-		u8 *conntab = dcb_conntab(bios->dev);
+		u8 *conntab = olddcb_conntab(bios->dev);
 		if (conntab)
 			conntab[0] = 0x00;
 	}
@@ -5504,10 +2132,10 @@
 
 	/* dump connector table entries to log, if any exist */
 	idx = -1;
-	while ((conn = dcb_conn(dev, ++idx))) {
+	while ((conn = olddcb_conn(dev, ++idx))) {
 		if (conn[0] != 0xff) {
 			NV_TRACE(dev, "DCB conn %02d: ", idx);
-			if (dcb_conntab(dev)[3] < 4)
+			if (olddcb_conntab(dev)[3] < 4)
 				printk("%04x\n", ROM16(conn[0]));
 			else
 				printk("%08x\n", ROM32(conn[0]));
@@ -5550,15 +2178,15 @@
 	hwsq_entry_offset = hwsq_offset + 2 + entry * bytes_to_write;
 
 	/* set sequencer control */
-	bios_wr32(bios, 0x00001304, ROM32(bios->data[hwsq_entry_offset]));
+	nv_wr32(dev, 0x00001304, ROM32(bios->data[hwsq_entry_offset]));
 	bytes_to_write -= 4;
 
 	/* write ucode */
 	for (i = 0; i < bytes_to_write; i += 4)
-		bios_wr32(bios, 0x00001400 + i, ROM32(bios->data[hwsq_entry_offset + i + 4]));
+		nv_wr32(dev, 0x00001400 + i, ROM32(bios->data[hwsq_entry_offset + i + 4]));
 
 	/* twiddle NV_PBUS_DEBUG_4 */
-	bios_wr32(bios, NV_PBUS_DEBUG_4, bios_rd32(bios, NV_PBUS_DEBUG_4) | 0x18);
+	nv_wr32(dev, NV_PBUS_DEBUG_4, nv_rd32(dev, NV_PBUS_DEBUG_4) | 0x18);
 
 	return 0;
 }
@@ -5618,32 +2246,6 @@
 	return bios->fp.edid = &bios->data[offset];
 }
 
-void
-nouveau_bios_run_init_table(struct drm_device *dev, uint16_t table,
-			    struct dcb_entry *dcbent, int crtc)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	struct init_exec iexec = { true, false };
-
-	spin_lock_bh(&bios->lock);
-	bios->display.output = dcbent;
-	bios->display.crtc = crtc;
-	parse_init_table(bios, table, &iexec);
-	bios->display.output = NULL;
-	spin_unlock_bh(&bios->lock);
-}
-
-void
-nouveau_bios_init_exec(struct drm_device *dev, uint16_t table)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	struct init_exec iexec = { true, false };
-
-	parse_init_table(bios, table, &iexec);
-}
-
 static bool NVInitVBIOS(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -5704,23 +2306,8 @@
 		bios->fp.lvds_init_run = false;
 	}
 
-	parse_init_tables(bios);
-
-	/*
-	 * Runs some additional script seen on G8x VBIOSen.  The VBIOS'
-	 * parser will run this right after the init tables, the binary
-	 * driver appears to run it at some point later.
-	 */
-	if (bios->some_script_ptr) {
-		struct init_exec iexec = {true, false};
-
-		NV_INFO(dev, "Parsing VBIOS init table at offset 0x%04X\n",
-			bios->some_script_ptr);
-		parse_init_table(bios, bios->some_script_ptr, &iexec);
-	}
-
 	if (dev_priv->card_type >= NV_50) {
-		for (i = 0; i < bios->dcb.entries; i++) {
+		for (i = 0; bios->execute && i < bios->dcb.entries; i++) {
 			nouveau_bios_run_display_table(dev, 0, 0,
 						       &bios->dcb.entry[i], -1);
 		}