hwmon: (lm87) Add support for the Analog Devices ADM1024
It happens that the Analog Devices ADM1024 is fully compatible with
the National Semiconductor LM87, so support for the former can easily
be added to the lm87 driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 28cdff0..3ab4c3f 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -5,7 +5,7 @@
* Philip Edelbrock <phil@netroedge.com>
* Stephen Rousset <stephen.rousset@rocketlogix.com>
* Dan Eaton <dan.eaton@rocketlogix.com>
- * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004,2007 Jean Delvare <khali@linux-fr.org>
*
* Original port to Linux 2.6 by Jeff Oliver.
*
@@ -37,6 +37,11 @@
* instead. The LM87 is the only hardware monitoring chipset I know of
* which uses amplitude modulation. Be careful when using this feature.
*
+ * This driver also supports the ADM1024, a sensor chip made by Analog
+ * Devices. That chip is fully compatible with the LM87. Complete
+ * datasheet can be obtained from Analog's website at:
+ * http://www.analog.com/en/prod/0,2877,ADM1024,00.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -74,7 +79,7 @@
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_2(lm87, adm1024);
/*
* The LM87 registers
@@ -662,6 +667,7 @@
struct i2c_client *new_client;
struct lm87_data *data;
int err = 0;
+ static const char *names[] = { "lm87", "adm1024" };
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
@@ -686,11 +692,18 @@
/* Now, we do the remaining detection. */
if (kind < 0) {
+ u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
- if (rev < 0x01 || rev > 0x08
- || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
- || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
+ if (cid == 0x02 /* National Semiconductor */
+ && (rev >= 0x01 && rev <= 0x08))
+ kind = lm87;
+ else if (cid == 0x41 /* Analog Devices */
+ && (rev & 0xf0) == 0x10)
+ kind = adm1024;
+
+ if (kind < 0
+ || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
dev_dbg(&adapter->dev,
"LM87 detection failed at 0x%02x.\n",
address);
@@ -699,7 +712,7 @@
}
/* We can fill in the remaining client fields */
- strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
+ strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE);
data->valid = 0;
mutex_init(&data->update_lock);
