Merge tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc.
The majority of them are regression fixes for stuff that broke during
the merge 3.3 window.
The notable ones are:
* The at91 ata drivers both broke because of an earlier cleanup patch that
some other patches were based on. Jean-Christophe decided to remove
the legacy at91_ide driver and fix the new-style at91-pata driver while
keeping the cleanup patch. I almost rejected the patches for being too
late and too big but in the end decided to accept them because they
fix a regression.
* A patch fixing build breakage from the sysdev-to-device conversion
colliding with other changes touches a number of mach-s3c files.
* b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup"
is a mechanical change that unfortunately touches a lot of lines
that should up in the diffstat.
* tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: at91: drop ide driver in favor of the pata one
pata/at91: use newly introduced SMC accessors
ARM: at91: add accessor to manage SMC
ARM: at91:rtc/rtc-at91sam9: ioremap register bank
ARM: at91: USB AT91 gadget registration for module
ep93xx: fix build of vision_ep93xx.c
ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3
ARM: orion: Fix USB phy for orion5x.
ARM: orion: Fix Orion5x GPIO regression from MPP cleanup
ARM: EXYNOS: Add cpu-offset property in gic device tree node
ARM: EXYNOS: Bring exynos4-dt up to date
ARM: OMAP3: cm-t35: fix section mismatch warning
ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains
ARM: tegra: paz00: fix wrong UART port on mini-pcie plug
ARM: tegra: paz00: fix wrong SD1 power gpio
i2c: tegra: Add devexit_p() for remove
ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board
ARM: EXYNOS: Correct framebuffer window size on Nuri board
ARM: SAMSUNG: Fix missing api-change from subsys_interface change
ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type"
...
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 63d7578..a1dd2ee 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -29,6 +29,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ cpu-offset = <0x8000>;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 1a1d702..825d295 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -46,11 +46,11 @@
};
serial@70006200 {
- status = "disable";
+ clock-frequency = <216000000>;
};
serial@70006300 {
- clock-frequency = <216000000>;
+ status = "disable";
};
serial@70006400 {
@@ -60,7 +60,7 @@
sdhci@c8000000 {
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec..97676bd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6..5a24f0b 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -1215,8 +1215,7 @@
* CF/IDE
* -------------------------------------------------------------------- */
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
- defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -1313,10 +1312,8 @@
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
- pdev->name = "at91_ide";
#else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
#endif
else
pdev->name = "at91_cf";
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index fc59cbd..1e28bed 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 7b46b27..366a776 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -355,8 +355,8 @@
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
- defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -450,7 +450,7 @@
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
platform_device_register(pdev);
}
#else
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index eb18a70..175e1fd 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -18,6 +18,35 @@
#include <mach/cpu.h>
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 8294783..99a0a1d2 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -2,6 +2,7 @@
* linux/arch/arm/mach-at91/sam9_smc.c
*
* Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,7 +23,22 @@
static void __iomem *smc_base_addr[2];
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
{
/* Setup register */
@@ -45,16 +61,66 @@
base + AT91_SMC_CYCLE);
/* Mode register */
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
+ sam9_smc_cs_write_mode(base, config);
}
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index 039c5ce..3e52dcd4 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -8,27 +8,4 @@
* published by the Free Software Foundation.
*/
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dd1429ae..bda7aca 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -28,6 +28,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
@@ -71,7 +72,7 @@
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 03dd401..d5fb44f 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -32,6 +32,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -153,7 +154,6 @@
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
- .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
@@ -348,6 +348,8 @@
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index a5823a7..13312cc 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -32,6 +32,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -42,6 +43,7 @@
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
+#endif
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 26a668b..48af285 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -32,12 +32,14 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
+#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5a8c42e..187287a 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -30,6 +30,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -93,6 +94,7 @@
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
+#endif
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 85fa027..e6b02fd 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,11 +15,13 @@
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
/*
* The following lookup table is used to override device names when devices
@@ -60,7 +62,7 @@
static void __init exynos4210_dt_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
@@ -79,7 +81,9 @@
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.init_irq = exynos4_init_irq,
.map_io = exynos4210_dt_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b895ec0..435261f 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -220,14 +220,14 @@
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
- .xres = 1280,
- .yres = 800,
+ .xres = 1024,
+ .yres = 600,
.refresh = 60,
},
.max_bpp = 24,
.default_bpp = 16,
- .virtual_x = 1280,
- .virtual_y = 800,
+ .virtual_x = 1024,
+ .virtual_y = 2 * 600,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 37ac93e..0fc65ff 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -910,7 +910,7 @@
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
- .clk_frequency = 21600000UL,
+ .clk_frequency = 24000000UL,
.csi_data_align = 32,
},
};
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index a4f61a4..e190130 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -206,7 +206,7 @@
}
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
@@ -384,7 +384,9 @@
exynos4_restore_pll();
+#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
+#endif
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index cc15426..77d4852 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -27,6 +27,7 @@
#include <plat/cache-feroceon-l2.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
@@ -73,7 +74,7 @@
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e8fda45..d5a0d1d 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -31,314 +31,314 @@
#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP_MAX 49
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 0cdd410..a5dcf766 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -19,6 +19,7 @@
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
@@ -169,7 +170,7 @@
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
- orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+ orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
index b61b509..3752302 100644
--- a/arch/arm/mach-mv78xx0/mpp.h
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -24,296 +24,296 @@
#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1)
#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1)
#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1)
#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1)
#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1)
#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1)
#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1)
#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1)
#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1)
#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1)
#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1)
#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1)
#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1)
#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1)
#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1)
#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1)
#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1)
#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1)
#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1)
#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1)
#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1)
#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1)
#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1)
#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1)
#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1)
#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1)
#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1)
#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1)
#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1)
#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1)
#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1)
#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1)
#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1)
#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1)
#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1)
#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1)
#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1)
#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1)
#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1)
#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1)
#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0)
#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1)
#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0)
#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1)
#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1)
#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1)
#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1)
#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1)
#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1)
#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1)
#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1)
#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1)
#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1)
#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1)
#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1)
#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1)
#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1)
#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1)
#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1)
#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1)
#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1)
#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1)
#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1)
#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1)
#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1)
#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1)
#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1)
#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1)
#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1)
#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1)
#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1)
#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1)
#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1)
#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1)
#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1)
#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1)
#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1)
#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1)
#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1)
#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1)
#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1)
#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1)
#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1)
#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1)
#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1)
#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1)
#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1)
#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1)
#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1)
#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1)
#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1)
#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1)
#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1)
#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1)
@@ -323,14 +323,14 @@
#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1)
#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1)
#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1)
#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fc9b238..bd76394 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -11,9 +11,9 @@
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e921e3b..d73316e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -437,7 +437,7 @@
.reset_gpio_port[2] = -EINVAL
};
-static void cm_t35_init_usbh(void)
+static void __init cm_t35_init_usbh(void)
{
int err;
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index d587560..ad49762 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -17,6 +17,7 @@
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
@@ -102,6 +103,7 @@
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
@@ -141,6 +143,7 @@
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
@@ -160,6 +163,7 @@
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index b8822f8..23de98d 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -82,13 +82,7 @@
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- /* Ignore UART clocks. These are handled by UART core (serial.c) */
- f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
- f2 &= ~OMAP24XX_EN_UART3_MASK;
-
- if (f1 | f2)
- return 1;
- return 0;
+ return (f1 | f2) ? 1 : 0;
}
static void omap2_enter_full_retention(void)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0e28bae2..5dad38e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
@@ -72,7 +73,8 @@
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
- orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+ orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+ EHCI_PHY_ORION);
}
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 7dc6c46..5404535 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -115,7 +115,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
@@ -133,7 +134,8 @@
arch_initcall(s3c2410_cpufreq_init);
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
@@ -144,7 +146,7 @@
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
- return s3c2410_cpufreq_add(dev);
+ return s3c2410_cpufreq_add(dev, sif);
}
static struct subsys_interface s3c2410a_cpufreq_interface = {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 2afd000..4803338 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -132,7 +132,8 @@
},
};
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -148,7 +149,7 @@
static int __init s3c2410_dma_drvinit(void)
{
- return subsys_interface_register(&s3c2410_interface);
+ return subsys_interface_register(&s3c2410_dma_interface);
}
arch_initcall(s3c2410_dma_drvinit);
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index c07438b..e0b3b34 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -66,7 +66,7 @@
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
};
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
{
return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
}
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index fda5385..03f706d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -111,7 +111,7 @@
.resume = s3c2410_pm_resume,
};
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2410_pm_prepare;
pm_cpu_sleep = s3c2410_cpu_suspend;
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index d8664b7..125be7d 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -194,7 +194,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
unsigned long fclk_rate;
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 142acd3..38472ac 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -159,7 +159,8 @@
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
};
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index a8a46c1..e65619d 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -170,7 +170,7 @@
static struct irq_chip s3c2412_irq_rtc_chip;
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d1adfa6..d045885 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -56,7 +56,7 @@
{
}
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2412_pm_prepare;
pm_cpu_sleep = s3c2412_cpu_suspend;
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 36df761..fd49f35 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -213,7 +213,8 @@
return 0;
}
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 3bdb15a..1bd4817 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -48,7 +48,7 @@
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
}
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2416_pm_prepare;
pm_cpu_sleep = s3c2416_cpu_suspend;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index bedbc87..414364e 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -149,7 +149,7 @@
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
};
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 15b1ddf..5f0a0c8 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -174,7 +174,8 @@
},
};
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2440_dma_order);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 4fee9bc..4a18cde 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -92,7 +92,7 @@
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev)
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index cf75966..6177676 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
@@ -270,7 +270,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2440_cpufreq_add(struct device *dev)
+static int s3c2440_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index b5368ae..551fb43 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -51,7 +51,7 @@
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
-static int s3c2440_plls12_add(struct device *dev)
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 42f2b5c..3f15bcf 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -79,7 +79,8 @@
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
-static int s3c2440_plls169344_add(struct device *dev)
+static int s3c2440_plls169344_add(struct device *dev,
+ struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 8004e04..22cb7c9 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -122,7 +122,7 @@
},
};
-static int s3c2442_clk_add(struct device *dev)
+static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index b3fdbdd..6d9b688 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -72,7 +72,7 @@
},
};
-static int s3c244x_clk_add(struct device *dev)
+static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index 74d3dcf..5fe8e58 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -91,7 +91,7 @@
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev)
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index de6b4a2..1422451 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -135,7 +135,8 @@
.map_size = ARRAY_SIZE(s3c2443_dma_mappings),
};
-static int __init s3c2443_dma_add(struct device *dev)
+static int __init s3c2443_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
return s3c24xx_dma_init_map(&s3c2443_dma_sel);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 35e4ff2..ac2829f 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -241,7 +241,8 @@
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev)
+static int __init s3c2443_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 31bb27d..aebbcc2 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -138,6 +138,11 @@
.ctrlbit = S3C_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .devname = "s3c2440-i2c.0",
+#else
+ .devname = "s3c2440-i2c",
+#endif
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 4a7394d..bee7dcd 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -49,7 +49,7 @@
/* uart registration process */
-void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 23f9b22..9cba18b 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -160,7 +160,7 @@
}
-static int s5p64x0_pm_add(struct device *dev)
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index c78dfdd..b9ec0c3 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -175,7 +175,7 @@
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
}
@@ -372,7 +372,7 @@
}, {
.name = "hdmiphy",
.devname = "s5pv210-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
+ .enable = s5pv210_clk_hdmiphy_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "dacphy",
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 677c71c..736bfb1 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -133,7 +133,7 @@
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct device *dev)
+static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fcf4f37..330afdf 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -60,9 +60,9 @@
.uartclk = 216000000,
}, {
/* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
+ .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
+ .mapbase = TEGRA_UARTC_BASE,
+ .irq = INT_UARTC,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
@@ -174,7 +174,7 @@
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
- { "uartd", "pll_p", 216000000, true },
+ { "uartc", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index ffa83f5..3c9f8da 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -22,7 +22,7 @@
/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index d0132e8..3c9339058 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -23,11 +23,6 @@
#include <linux/list.h>
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
#define TEGRA_DMA_REQ_SEL_CNTR 0
#define TEGRA_DMA_REQ_SEL_I2S_2 1
#define TEGRA_DMA_REQ_SEL_I2S_1 2
@@ -56,6 +51,11 @@
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
enum tegra_dma_mode {
TEGRA_DMA_SHARED = 1,
TEGRA_DMA_MODE_CONTINOUS = 2,
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 64f9d1c..3047ff9 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
#else
static inline void omap_secure_ram_reserve_memblock(void)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index e5a2fde..089899a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -789,10 +789,7 @@
/*****************************************************************************
* EHCI
****************************************************************************/
-static struct orion_ehci_data orion_ehci_data = {
- .phy_version = EHCI_PHY_NA,
-};
-
+static struct orion_ehci_data orion_ehci_data;
static u64 ehci_dmamask = DMA_BIT_MASK(32);
@@ -812,8 +809,10 @@
};
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq)
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version)
{
+ orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 0fe08d7..a7fa005 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -89,7 +89,8 @@
unsigned long irq_1);
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq);
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version);
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 9155343..3b1e17b 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -64,8 +64,7 @@
gpio_mode |= GPIO_INPUT_OK;
if (*mpp_list & MPP_OUTPUT_MASK)
gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
+
orion_gpio_set_valid(num, gpio_mode);
}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 32a6e39..f10768e 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -468,8 +468,10 @@
{
struct s3c2410_platform_i2c *npd;
- if (!pd)
+ if (!pd) {
pd = &default_i2c_data;
+ pd->bus_num = 0;
+ }
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s3c_device_i2c0);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a7d91a7..53d3770 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -207,11 +207,11 @@
{
int ret = 0;
int use_iordy;
+ struct sam9_smc_config smc;
unsigned int t6z; /* data tristate time in ns */
unsigned int cycle; /* SMC Cycle width in MCK ticks */
unsigned int setup; /* SMC Setup width in MCK ticks */
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
- unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
unsigned long mck_hz; /* MCK frequency in Hz */
@@ -244,26 +244,20 @@
}
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
- info->mode |= AT91_SMC_TDF_(tdf_cycles);
- /* write SMC Setup Register */
- at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(cs_setup) |
- AT91_SMC_NCS_RDSETUP_(cs_setup));
- /* write SMC Pulse Register */
- at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cs_pulse) |
- AT91_SMC_NCS_RDPULSE_(cs_pulse));
- /* write SMC Cycle Register */
- at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
- /* write SMC Mode Register*/
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+ /* SMC Setup Register */
+ smc.nwe_setup = smc.nrd_setup = setup;
+ smc.ncs_write_setup = smc.ncs_read_setup = 0;
+ /* SMC Pulse Register */
+ smc.nwe_pulse = smc.nrd_pulse = pulse;
+ smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+ /* SMC Cycle Register */
+ smc.write_cycle = smc.read_cycle = cycle;
+ /* SMC Mode Register*/
+ smc.tdf_cycles = tdf_cycles;
+ smc.mode = info->mode;
+
+ sam9_smc_configure(0, info->cs, &smc);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -288,20 +282,20 @@
struct at91_ide_info *info = dev->link->ap->host->private_data;
unsigned int consumed;
unsigned long flags;
- unsigned int mode;
+ struct sam9_smc_config smc;
local_irq_save(flags);
- mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+ sam9_smc_read_mode(0, info->cs, &smc);
/* set 16bit mode before writing data */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+ sam9_smc_write_mode(0, info->cs, &smc);
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
/* restore 8bit mode after data is written */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+ sam9_smc_write_mode(0, info->cs, &smc);
local_irq_restore(flags);
return consumed;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6381604..0ab4a95 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -755,7 +755,7 @@
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
- .remove = tegra_i2c_remove,
+ .remove = __devexit_p(tegra_i2c_remove),
#ifdef CONFIG_PM
.suspend = tegra_i2c_suspend,
.resume = tegra_i2c_resume,
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 7f879b2..af8d016 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,4 +116,3 @@
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
-obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
deleted file mode 100644
index 41d4155..0000000
--- a/drivers/ide/at91_ide.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
- * with Compact Flash True IDE logic
- *
- * Copyright (c) 2008, 2009 Kelvatek Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/ide.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <asm/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#define DRV_NAME "at91_ide"
-
-#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
-#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
-
-/*
- * Access to IDE device is possible through EBI Static Memory Controller
- * with Compact Flash logic. For details see EBI and SMC datasheet sections
- * of any microcontroller from AT91SAM9 family.
- *
- * Within SMC chip select address space, lines A[23:21] distinguish Compact
- * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
- * 0x00c0000 - True IDE
- * 0x00e0000 - Alternate True IDE (Alt Status Register)
- *
- * On True IDE mode Task File and Data Register are mapped at the same address.
- * To distinguish access between these two different bus data width is used:
- * 8Bit for Task File, 16Bit for Data I/O.
- *
- * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
- * only inside IDE callback routines which are serialized by IDE layer,
- * so no additional locking needed.
- */
-
-#define TASK_FILE 0x00c00000
-#define ALT_MODE 0x00e00000
-#define REGS_SIZE 8
-
-#define enter_16bit(cs, mode) do { \
- mode = at91_sys_read(AT91_SMC_MODE(cs)); \
- at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
-} while (0)
-
-#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
-
-static void set_smc_timings(const u8 chipselect, const u16 cycle,
- const u16 setup, const u16 pulse,
- const u16 data_float, int use_iordy)
-{
- unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_BAT_SELECT;
-
- /* disable or enable waiting for IORDY signal */
- if (use_iordy)
- mode |= AT91_SMC_EXNWMODE_READY;
-
- /* add data float cycles if needed */
- if (data_float)
- mode |= AT91_SMC_TDF_(data_float);
-
- at91_sys_write(AT91_SMC_MODE(chipselect), mode);
-
- /* setup timings in SMC */
- at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cycle) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_RDPULSE_(cycle));
- at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
-}
-
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
-{
- u64 tmp = ns;
-
- tmp *= mck_hz;
- tmp += 1000*1000*1000 - 1; /* round up */
- do_div(tmp, 1000*1000*1000);
- return (unsigned int) tmp;
-}
-
-static void apply_timings(const u8 chipselect, const u8 pio,
- const struct ide_timing *timing, int use_iordy)
-{
- unsigned int t0, t1, t2, t6z;
- unsigned int cycle, setup, pulse, data_float;
- unsigned int mck_hz;
- struct clk *mck;
-
- /* see table 22 of Compact Flash standard 4.1 for the meaning,
- * we do not stretch active (t2) time, so setup (t1) + hold time (th)
- * assure at least minimal recovery (t2i) time */
- t0 = timing->cyc8b;
- t1 = timing->setup;
- t2 = timing->act8b;
- t6z = (pio < 5) ? 30 : 20;
-
- pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
-
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
- pdbg("mck_hz=%u\n", mck_hz);
-
- cycle = calc_mck_cycles(t0, mck_hz);
- setup = calc_mck_cycles(t1, mck_hz);
- pulse = calc_mck_cycles(t2, mck_hz);
- data_float = calc_mck_cycles(t6z, mck_hz);
-
- pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
- cycle, setup, pulse, data_float);
-
- set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
-}
-
-static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- len++;
-
- enter_16bit(chipselect, mode);
- readsw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- enter_16bit(chipselect, mode);
- writesw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct ide_timing *timing;
- u8 chipselect = hwif->select_data;
- int use_iordy = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- pdbg("chipselect %u pio %u\n", chipselect, pio);
-
- timing = ide_timing_find_mode(XFER_PIO_0 + pio);
- BUG_ON(!timing);
-
- if (ide_pio_need_iordy(drive, pio))
- use_iordy = 1;
-
- apply_timings(chipselect, pio, timing, use_iordy);
-}
-
-static const struct ide_tp_ops at91_ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = at91_ide_input_data,
- .output_data = at91_ide_output_data,
-};
-
-static const struct ide_port_ops at91_ide_port_ops = {
- .set_pio_mode = at91_ide_set_pio_mode,
-};
-
-static const struct ide_port_info at91_ide_port_info __initdata = {
- .port_ops = &at91_ide_port_ops,
- .tp_ops = &at91_ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO6,
- .chipset = ide_generic,
-};
-
-/*
- * If interrupt is delivered through GPIO, IRQ are triggered on falling
- * and rising edge of signal. Whereas IDE device request interrupt on high
- * level (rising edge in our case). This mean we have fake interrupts, so
- * we need to check interrupt pin and exit instantly from ISR when line
- * is on low level.
- */
-
-irqreturn_t at91_irq_handler(int irq, void *dev_id)
-{
- int ntries = 8;
- int pin_val1, pin_val2;
-
- /* additional deglitch, line can be noisy in badly designed PCB */
- do {
- pin_val1 = at91_get_gpio_value(irq);
- pin_val2 = at91_get_gpio_value(irq);
- } while (pin_val1 != pin_val2 && --ntries > 0);
-
- if (pin_val1 == 0 || ntries <= 0)
- return IRQ_HANDLED;
-
- return ide_intr(irq, dev_id);
-}
-
-static int __init at91_ide_probe(struct platform_device *pdev)
-{
- int ret;
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- unsigned long tf_base = 0, ctl_base = 0;
- struct at91_cf_data *board = pdev->dev.platform_data;
-
- if (!board)
- return -ENODEV;
-
- if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
- perr("no device detected\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- perr("can't get memory resource\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE, "ide") ||
- !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE, "alt")) {
- perr("memory resources in use\n");
- return -EBUSY;
- }
-
- pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
- board->irq_pin, (unsigned long) res->start);
-
- tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE);
- ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE);
- if (!tf_base || !ctl_base) {
- perr("can't map memory regions\n");
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- if (board->flags & AT91_IDE_SWAP_A0_A2) {
- /* workaround for stupid hardware bug */
- hw.io_ports.data_addr = tf_base + 0;
- hw.io_ports.error_addr = tf_base + 4;
- hw.io_ports.nsect_addr = tf_base + 2;
- hw.io_ports.lbal_addr = tf_base + 6;
- hw.io_ports.lbam_addr = tf_base + 1;
- hw.io_ports.lbah_addr = tf_base + 5;
- hw.io_ports.device_addr = tf_base + 3;
- hw.io_ports.command_addr = tf_base + 7;
- hw.io_ports.ctl_addr = ctl_base + 3;
- } else
- ide_std_init_ports(&hw, tf_base, ctl_base + 6);
-
- hw.irq = board->irq_pin;
- hw.dev = &pdev->dev;
-
- host = ide_host_alloc(&at91_ide_port_info, hws, 1);
- if (!host) {
- perr("failed to allocate ide host\n");
- return -ENOMEM;
- }
-
- /* setup Static Memory Controller - PIO 0 as default */
- apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
-
- /* with GPIO interrupt we have to do quirks in handler */
- if (gpio_is_valid(board->irq_pin))
- host->irq_handler = at91_irq_handler;
-
- host->ports[0]->select_data = board->chipselect;
-
- ret = ide_host_register(host, &at91_ide_port_info, hws);
- if (ret) {
- perr("failed to register ide host\n");
- goto err_free_host;
- }
- platform_set_drvdata(pdev, host);
- return 0;
-
-err_free_host:
- ide_host_free(host);
- return ret;
-}
-
-static int __exit at91_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-static struct platform_driver at91_ide_driver = {
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(at91_ide_remove),
-};
-
-static int __init at91_ide_init(void)
-{
- return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
-}
-
-static void __exit at91_ide_exit(void)
-{
- platform_driver_unregister(&at91_ide_driver);
-}
-
-module_init(at91_ide_init);
-module_exit(at91_ide_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
-
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index a3ad957..ee3c122 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -307,8 +307,12 @@
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, rtc);
- rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
- rtc->rtt += r->start;
+ rtc->rtt = ioremap(r->start, resource_size(r));
+ if (!rtc->rtt) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
mr = rtt_readl(rtc, MR);
@@ -326,7 +330,7 @@
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtcdev)) {
ret = PTR_ERR(rtc->rtcdev);
- goto fail;
+ goto fail_register;
}
/* register irq handler after we know what name we'll use */
@@ -351,6 +355,8 @@
return 0;
+fail_register:
+ iounmap(rtc->rtt);
fail:
platform_set_drvdata(pdev, NULL);
kfree(rtc);
@@ -371,6 +377,7 @@
rtc_device_unregister(rtc->rtcdev);
+ iounmap(rtc->rtt);
platform_set_drvdata(pdev, NULL);
kfree(rtc);
return 0;
