i2c-viapro: Add VX800/VX820 support
Thanks to new datasheets published on http://linux.via.com.tw we can now add
support for VX800/VX820 chipsets.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e54b9fe4..b32164c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -209,7 +209,7 @@
will be called i2c-via.
config I2C_VIAPRO
- tristate "VIA VT82C596/82C686/82xx and CX700"
+ tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
depends on PCI
help
If you say yes to this option, support will be included for the VIA
@@ -223,6 +223,8 @@
VT8237R/A/S
VT8251
CX700
+ VX800
+ VX820
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 862eb35..1345da9 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -36,6 +36,7 @@
VT8237S 0x3372 yes
VT8251 0x3287 yes
CX700 0x8324 yes
+ VX800/VX820 0x8353 yes
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -396,6 +397,7 @@
switch (pdev->device) {
case PCI_DEVICE_ID_VIA_CX700:
+ case PCI_DEVICE_ID_VIA_VX800:
case PCI_DEVICE_ID_VIA_8251:
case PCI_DEVICE_ID_VIA_8237:
case PCI_DEVICE_ID_VIA_8237A:
@@ -459,6 +461,8 @@
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
.driver_data = SMBBA3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
+ .driver_data = SMBBA3 },
{ 0, }
};
