ALSA: cs4236: update control names

Update control names to be more closer to their meaning.
Change the "Mono" name to the "Beep" as this line is usually
used to forward the PC beeper signal to sound card's output.
Update names for both cs423x and wss.

Clean up cs4235 controls according to the cs4235 doc. Rename
some of the cs4235 controls to be consistent with the cs4236's
ones.

Also, delete one misnamed cs4231 register define.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 705db09..5b9d6c1 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -2224,7 +2224,7 @@
 	.get = snd_wss_get_mux,
 	.put = snd_wss_put_mux,
 },
-WSS_DOUBLE("Mic Boost", 0,
+WSS_DOUBLE("Mic Boost (+20dB)", 0,
 		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 5, 5, 1, 0),
 WSS_SINGLE("Loopback Capture Switch", 0,
 		CS4231_LOOPBACK, 0, 1, 0),
@@ -2235,14 +2235,14 @@
 WSS_DOUBLE_TLV("Line Playback Volume", 0,
 		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1,
 		db_scale_5bit_12db_max),
-WSS_SINGLE("Mono Playback Switch", 0,
+WSS_SINGLE("Beep Playback Switch", 0,
 		CS4231_MONO_CTRL, 7, 1, 1),
-WSS_SINGLE_TLV("Mono Playback Volume", 0,
+WSS_SINGLE_TLV("Beep Playback Volume", 0,
 		CS4231_MONO_CTRL, 0, 15, 1,
 		db_scale_4bit),
 WSS_SINGLE("Mono Output Playback Switch", 0,
 		CS4231_MONO_CTRL, 6, 1, 1),
-WSS_SINGLE("Mono Output Playback Bypass", 0,
+WSS_SINGLE("Beep Bypass Playback Switch", 0,
 		CS4231_MONO_CTRL, 5, 1, 0),
 };