| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * linux/can/dev.h |
| * |
| * Definitions for the CAN network device driver interface |
| * |
| * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com> |
| * Varma Electronics Oy |
| * |
| * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com> |
| * |
| */ |
| |
| #ifndef _CAN_DEV_H |
| #define _CAN_DEV_H |
| |
| #include <linux/can.h> |
| #include <linux/can/error.h> |
| #include <linux/can/led.h> |
| #include <linux/can/netlink.h> |
| #include <linux/netdevice.h> |
| |
| /* |
| * CAN mode |
| */ |
| enum can_mode { |
| CAN_MODE_STOP = 0, |
| CAN_MODE_START, |
| CAN_MODE_SLEEP |
| }; |
| |
| /* |
| * CAN common private data |
| */ |
| struct can_priv { |
| struct net_device *dev; |
| struct can_device_stats can_stats; |
| |
| struct can_bittiming bittiming, data_bittiming; |
| const struct can_bittiming_const *bittiming_const, |
| *data_bittiming_const; |
| const u16 *termination_const; |
| unsigned int termination_const_cnt; |
| u16 termination; |
| const u32 *bitrate_const; |
| unsigned int bitrate_const_cnt; |
| const u32 *data_bitrate_const; |
| unsigned int data_bitrate_const_cnt; |
| struct can_clock clock; |
| |
| enum can_state state; |
| |
| /* CAN controller features - see include/uapi/linux/can/netlink.h */ |
| u32 ctrlmode; /* current options setting */ |
| u32 ctrlmode_supported; /* options that can be modified by netlink */ |
| u32 ctrlmode_static; /* static enabled options for driver/hardware */ |
| |
| int restart_ms; |
| struct delayed_work restart_work; |
| |
| int (*do_set_bittiming)(struct net_device *dev); |
| int (*do_set_data_bittiming)(struct net_device *dev); |
| int (*do_set_mode)(struct net_device *dev, enum can_mode mode); |
| int (*do_set_termination)(struct net_device *dev, u16 term); |
| int (*do_get_state)(const struct net_device *dev, |
| enum can_state *state); |
| int (*do_get_berr_counter)(const struct net_device *dev, |
| struct can_berr_counter *bec); |
| |
| unsigned int echo_skb_max; |
| struct sk_buff **echo_skb; |
| |
| #ifdef CONFIG_CAN_LEDS |
| struct led_trigger *tx_led_trig; |
| char tx_led_trig_name[CAN_LED_NAME_SZ]; |
| struct led_trigger *rx_led_trig; |
| char rx_led_trig_name[CAN_LED_NAME_SZ]; |
| struct led_trigger *rxtx_led_trig; |
| char rxtx_led_trig_name[CAN_LED_NAME_SZ]; |
| #endif |
| }; |
| |
| /* |
| * get_can_dlc(value) - helper macro to cast a given data length code (dlc) |
| * to __u8 and ensure the dlc value to be max. 8 bytes. |
| * |
| * To be used in the CAN netdriver receive path to ensure conformance with |
| * ISO 11898-1 Chapter 8.4.2.3 (DLC field) |
| */ |
| #define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC)) |
| #define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC)) |
| |
| /* Drop a given socketbuffer if it does not contain a valid CAN frame. */ |
| static inline bool can_dropped_invalid_skb(struct net_device *dev, |
| struct sk_buff *skb) |
| { |
| const struct canfd_frame *cfd = (struct canfd_frame *)skb->data; |
| |
| if (skb->protocol == htons(ETH_P_CAN)) { |
| if (unlikely(skb->len != CAN_MTU || |
| cfd->len > CAN_MAX_DLEN)) |
| goto inval_skb; |
| } else if (skb->protocol == htons(ETH_P_CANFD)) { |
| if (unlikely(skb->len != CANFD_MTU || |
| cfd->len > CANFD_MAX_DLEN)) |
| goto inval_skb; |
| } else |
| goto inval_skb; |
| |
| return false; |
| |
| inval_skb: |
| kfree_skb(skb); |
| dev->stats.tx_dropped++; |
| return true; |
| } |
| |
| static inline bool can_is_canfd_skb(const struct sk_buff *skb) |
| { |
| /* the CAN specific type of skb is identified by its data length */ |
| return skb->len == CANFD_MTU; |
| } |
| |
| /* helper to define static CAN controller features at device creation time */ |
| static inline void can_set_static_ctrlmode(struct net_device *dev, |
| u32 static_mode) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| /* alloc_candev() succeeded => netdev_priv() is valid at this point */ |
| priv->ctrlmode = static_mode; |
| priv->ctrlmode_static = static_mode; |
| |
| /* override MTU which was set by default in can_setup()? */ |
| if (static_mode & CAN_CTRLMODE_FD) |
| dev->mtu = CANFD_MTU; |
| } |
| |
| /* get data length from can_dlc with sanitized can_dlc */ |
| u8 can_dlc2len(u8 can_dlc); |
| |
| /* map the sanitized data length to an appropriate data length code */ |
| u8 can_len2dlc(u8 len); |
| |
| struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); |
| void free_candev(struct net_device *dev); |
| |
| /* a candev safe wrapper around netdev_priv */ |
| struct can_priv *safe_candev_priv(struct net_device *dev); |
| |
| int open_candev(struct net_device *dev); |
| void close_candev(struct net_device *dev); |
| int can_change_mtu(struct net_device *dev, int new_mtu); |
| |
| int register_candev(struct net_device *dev); |
| void unregister_candev(struct net_device *dev); |
| |
| int can_restart_now(struct net_device *dev); |
| void can_bus_off(struct net_device *dev); |
| |
| void can_change_state(struct net_device *dev, struct can_frame *cf, |
| enum can_state tx_state, enum can_state rx_state); |
| |
| void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, |
| unsigned int idx); |
| unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); |
| void can_free_echo_skb(struct net_device *dev, unsigned int idx); |
| |
| struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf); |
| struct sk_buff *alloc_canfd_skb(struct net_device *dev, |
| struct canfd_frame **cfd); |
| struct sk_buff *alloc_can_err_skb(struct net_device *dev, |
| struct can_frame **cf); |
| |
| #endif /* !_CAN_DEV_H */ |