| /********************************************************************** |
| * Author: Cavium, Inc. |
| * |
| * Contact: support@cavium.com |
| * Please include "LiquidIO" in the subject. |
| * |
| * Copyright (c) 2003-2016 Cavium, Inc. |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more details. |
| ***********************************************************************/ |
| #include <linux/pci.h> |
| #include <linux/if_vlan.h> |
| #include "liquidio_common.h" |
| #include "octeon_droq.h" |
| #include "octeon_iq.h" |
| #include "response_manager.h" |
| #include "octeon_device.h" |
| #include "octeon_nic.h" |
| #include "octeon_main.h" |
| #include "octeon_network.h" |
| |
| /* OOM task polling interval */ |
| #define LIO_OOM_POLL_INTERVAL_MS 250 |
| |
| int liquidio_set_feature(struct net_device *netdev, int cmd, u16 param1) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct octnic_ctrl_pkt nctrl; |
| int ret = 0; |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| nctrl.ncmd.u64 = 0; |
| nctrl.ncmd.s.cmd = cmd; |
| nctrl.ncmd.s.param1 = param1; |
| nctrl.iq_no = lio->linfo.txpciq[0].s.q_no; |
| nctrl.wait_time = 100; |
| nctrl.netpndev = (u64)netdev; |
| nctrl.cb_fn = liquidio_link_ctrl_cmd_completion; |
| |
| ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl); |
| if (ret < 0) { |
| dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n", |
| ret); |
| } |
| return ret; |
| } |
| |
| void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl, |
| unsigned int bytes_compl) |
| { |
| struct netdev_queue *netdev_queue = txq; |
| |
| netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl); |
| } |
| |
| void octeon_update_tx_completion_counters(void *buf, int reqtype, |
| unsigned int *pkts_compl, |
| unsigned int *bytes_compl) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb = NULL; |
| struct octeon_soft_command *sc; |
| |
| switch (reqtype) { |
| case REQTYPE_NORESP_NET: |
| case REQTYPE_NORESP_NET_SG: |
| finfo = buf; |
| skb = finfo->skb; |
| break; |
| |
| case REQTYPE_RESP_NET_SG: |
| case REQTYPE_RESP_NET: |
| sc = buf; |
| skb = sc->callback_arg; |
| break; |
| |
| default: |
| return; |
| } |
| |
| (*pkts_compl)++; |
| *bytes_compl += skb->len; |
| } |
| |
| void octeon_report_sent_bytes_to_bql(void *buf, int reqtype) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb; |
| struct octeon_soft_command *sc; |
| struct netdev_queue *txq; |
| |
| switch (reqtype) { |
| case REQTYPE_NORESP_NET: |
| case REQTYPE_NORESP_NET_SG: |
| finfo = buf; |
| skb = finfo->skb; |
| break; |
| |
| case REQTYPE_RESP_NET_SG: |
| case REQTYPE_RESP_NET: |
| sc = buf; |
| skb = sc->callback_arg; |
| break; |
| |
| default: |
| return; |
| } |
| |
| txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb)); |
| netdev_tx_sent_queue(txq, skb->len); |
| } |
| |
| void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr) |
| { |
| struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr; |
| struct net_device *netdev = (struct net_device *)nctrl->netpndev; |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| u8 *mac; |
| |
| if (nctrl->completion && nctrl->response_code) { |
| /* Signal whoever is interested that the response code from the |
| * firmware has arrived. |
| */ |
| WRITE_ONCE(*nctrl->response_code, nctrl->status); |
| complete(nctrl->completion); |
| } |
| |
| if (nctrl->status) |
| return; |
| |
| switch (nctrl->ncmd.s.cmd) { |
| case OCTNET_CMD_CHANGE_DEVFLAGS: |
| case OCTNET_CMD_SET_MULTI_LIST: |
| break; |
| |
| case OCTNET_CMD_CHANGE_MACADDR: |
| mac = ((u8 *)&nctrl->udd[0]) + 2; |
| if (nctrl->ncmd.s.param1) { |
| /* vfidx is 0 based, but vf_num (param1) is 1 based */ |
| int vfidx = nctrl->ncmd.s.param1 - 1; |
| bool mac_is_admin_assigned = nctrl->ncmd.s.param2; |
| |
| if (mac_is_admin_assigned) |
| netif_info(lio, probe, lio->netdev, |
| "MAC Address %pM is configured for VF %d\n", |
| mac, vfidx); |
| } else { |
| netif_info(lio, probe, lio->netdev, |
| " MACAddr changed to %pM\n", |
| mac); |
| } |
| break; |
| |
| case OCTNET_CMD_CHANGE_MTU: |
| /* If command is successful, change the MTU. */ |
| netif_info(lio, probe, lio->netdev, "MTU Changed from %d to %d\n", |
| netdev->mtu, nctrl->ncmd.s.param1); |
| netdev->mtu = nctrl->ncmd.s.param1; |
| queue_delayed_work(lio->link_status_wq.wq, |
| &lio->link_status_wq.wk.work, 0); |
| break; |
| |
| case OCTNET_CMD_GPIO_ACCESS: |
| netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n"); |
| |
| break; |
| |
| case OCTNET_CMD_ID_ACTIVE: |
| netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n"); |
| |
| break; |
| |
| case OCTNET_CMD_LRO_ENABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name); |
| break; |
| |
| case OCTNET_CMD_LRO_DISABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n", |
| netdev->name); |
| break; |
| |
| case OCTNET_CMD_VERBOSE_ENABLE: |
| dev_info(&oct->pci_dev->dev, "%s Firmware debug enabled\n", |
| netdev->name); |
| break; |
| |
| case OCTNET_CMD_VERBOSE_DISABLE: |
| dev_info(&oct->pci_dev->dev, "%s Firmware debug disabled\n", |
| netdev->name); |
| break; |
| |
| case OCTNET_CMD_VLAN_FILTER_CTL: |
| if (nctrl->ncmd.s.param1) |
| dev_info(&oct->pci_dev->dev, |
| "%s VLAN filter enabled\n", netdev->name); |
| else |
| dev_info(&oct->pci_dev->dev, |
| "%s VLAN filter disabled\n", netdev->name); |
| break; |
| |
| case OCTNET_CMD_ADD_VLAN_FILTER: |
| dev_info(&oct->pci_dev->dev, "%s VLAN filter %d added\n", |
| netdev->name, nctrl->ncmd.s.param1); |
| break; |
| |
| case OCTNET_CMD_DEL_VLAN_FILTER: |
| dev_info(&oct->pci_dev->dev, "%s VLAN filter %d removed\n", |
| netdev->name, nctrl->ncmd.s.param1); |
| break; |
| |
| case OCTNET_CMD_SET_SETTINGS: |
| dev_info(&oct->pci_dev->dev, "%s settings changed\n", |
| netdev->name); |
| |
| break; |
| |
| /* Case to handle "OCTNET_CMD_TNL_RX_CSUM_CTL" |
| * Command passed by NIC driver |
| */ |
| case OCTNET_CMD_TNL_RX_CSUM_CTL: |
| if (nctrl->ncmd.s.param1 == OCTNET_CMD_RXCSUM_ENABLE) { |
| netif_info(lio, probe, lio->netdev, |
| "RX Checksum Offload Enabled\n"); |
| } else if (nctrl->ncmd.s.param1 == |
| OCTNET_CMD_RXCSUM_DISABLE) { |
| netif_info(lio, probe, lio->netdev, |
| "RX Checksum Offload Disabled\n"); |
| } |
| break; |
| |
| /* Case to handle "OCTNET_CMD_TNL_TX_CSUM_CTL" |
| * Command passed by NIC driver |
| */ |
| case OCTNET_CMD_TNL_TX_CSUM_CTL: |
| if (nctrl->ncmd.s.param1 == OCTNET_CMD_TXCSUM_ENABLE) { |
| netif_info(lio, probe, lio->netdev, |
| "TX Checksum Offload Enabled\n"); |
| } else if (nctrl->ncmd.s.param1 == |
| OCTNET_CMD_TXCSUM_DISABLE) { |
| netif_info(lio, probe, lio->netdev, |
| "TX Checksum Offload Disabled\n"); |
| } |
| break; |
| |
| /* Case to handle "OCTNET_CMD_VXLAN_PORT_CONFIG" |
| * Command passed by NIC driver |
| */ |
| case OCTNET_CMD_VXLAN_PORT_CONFIG: |
| if (nctrl->ncmd.s.more == OCTNET_CMD_VXLAN_PORT_ADD) { |
| netif_info(lio, probe, lio->netdev, |
| "VxLAN Destination UDP PORT:%d ADDED\n", |
| nctrl->ncmd.s.param1); |
| } else if (nctrl->ncmd.s.more == |
| OCTNET_CMD_VXLAN_PORT_DEL) { |
| netif_info(lio, probe, lio->netdev, |
| "VxLAN Destination UDP PORT:%d DELETED\n", |
| nctrl->ncmd.s.param1); |
| } |
| break; |
| |
| case OCTNET_CMD_SET_FLOW_CTL: |
| netif_info(lio, probe, lio->netdev, "Set RX/TX flow control parameters\n"); |
| break; |
| |
| case OCTNET_CMD_QUEUE_COUNT_CTL: |
| netif_info(lio, probe, lio->netdev, "Queue count updated to %d\n", |
| nctrl->ncmd.s.param1); |
| break; |
| |
| default: |
| dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__, |
| nctrl->ncmd.s.cmd); |
| } |
| } |
| |
| void octeon_pf_changed_vf_macaddr(struct octeon_device *oct, u8 *mac) |
| { |
| bool macaddr_changed = false; |
| struct net_device *netdev; |
| struct lio *lio; |
| |
| rtnl_lock(); |
| |
| netdev = oct->props[0].netdev; |
| lio = GET_LIO(netdev); |
| |
| lio->linfo.macaddr_is_admin_asgnd = true; |
| |
| if (!ether_addr_equal(netdev->dev_addr, mac)) { |
| macaddr_changed = true; |
| ether_addr_copy(netdev->dev_addr, mac); |
| ether_addr_copy(((u8 *)&lio->linfo.hw_addr) + 2, mac); |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, netdev); |
| } |
| |
| rtnl_unlock(); |
| |
| if (macaddr_changed) |
| dev_info(&oct->pci_dev->dev, |
| "PF changed VF's MAC address to %pM\n", mac); |
| |
| /* no need to notify the firmware of the macaddr change because |
| * the PF did that already |
| */ |
| } |
| |
| static void octnet_poll_check_rxq_oom_status(struct work_struct *work) |
| { |
| struct cavium_wk *wk = (struct cavium_wk *)work; |
| struct lio *lio = (struct lio *)wk->ctxptr; |
| struct octeon_device *oct = lio->oct_dev; |
| struct octeon_droq *droq; |
| int q, q_no = 0; |
| |
| if (ifstate_check(lio, LIO_IFSTATE_RUNNING)) { |
| for (q = 0; q < lio->linfo.num_rxpciq; q++) { |
| q_no = lio->linfo.rxpciq[q].s.q_no; |
| droq = oct->droq[q_no]; |
| if (!droq) |
| continue; |
| octeon_droq_check_oom(droq); |
| } |
| } |
| queue_delayed_work(lio->rxq_status_wq.wq, |
| &lio->rxq_status_wq.wk.work, |
| msecs_to_jiffies(LIO_OOM_POLL_INTERVAL_MS)); |
| } |
| |
| int setup_rx_oom_poll_fn(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| |
| lio->rxq_status_wq.wq = alloc_workqueue("rxq-oom-status", |
| WQ_MEM_RECLAIM, 0); |
| if (!lio->rxq_status_wq.wq) { |
| dev_err(&oct->pci_dev->dev, "unable to create cavium rxq oom status wq\n"); |
| return -ENOMEM; |
| } |
| INIT_DELAYED_WORK(&lio->rxq_status_wq.wk.work, |
| octnet_poll_check_rxq_oom_status); |
| lio->rxq_status_wq.wk.ctxptr = lio; |
| queue_delayed_work(lio->rxq_status_wq.wq, |
| &lio->rxq_status_wq.wk.work, |
| msecs_to_jiffies(LIO_OOM_POLL_INTERVAL_MS)); |
| return 0; |
| } |
| |
| void cleanup_rx_oom_poll_fn(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| |
| if (lio->rxq_status_wq.wq) { |
| cancel_delayed_work_sync(&lio->rxq_status_wq.wk.work); |
| flush_workqueue(lio->rxq_status_wq.wq); |
| destroy_workqueue(lio->rxq_status_wq.wq); |
| } |
| } |
| |
| /* Runs in interrupt context. */ |
| static void lio_update_txq_status(struct octeon_device *oct, int iq_num) |
| { |
| struct octeon_instr_queue *iq = oct->instr_queue[iq_num]; |
| struct net_device *netdev; |
| struct lio *lio; |
| |
| netdev = oct->props[iq->ifidx].netdev; |
| |
| /* This is needed because the first IQ does not have |
| * a netdev associated with it. |
| */ |
| if (!netdev) |
| return; |
| |
| lio = GET_LIO(netdev); |
| if (netif_is_multiqueue(netdev)) { |
| if (__netif_subqueue_stopped(netdev, iq->q_index) && |
| lio->linfo.link.s.link_up && |
| (!octnet_iq_is_full(oct, iq_num))) { |
| netif_wake_subqueue(netdev, iq->q_index); |
| INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, iq_num, |
| tx_restart, 1); |
| } |
| } else if (netif_queue_stopped(netdev) && |
| lio->linfo.link.s.link_up && |
| (!octnet_iq_is_full(oct, lio->txq))) { |
| INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, lio->txq, |
| tx_restart, 1); |
| netif_wake_queue(netdev); |
| } |
| } |
| |
| /** |
| * \brief Setup output queue |
| * @param oct octeon device |
| * @param q_no which queue |
| * @param num_descs how many descriptors |
| * @param desc_size size of each descriptor |
| * @param app_ctx application context |
| */ |
| static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs, |
| int desc_size, void *app_ctx) |
| { |
| int ret_val; |
| |
| dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no); |
| /* droq creation and local register settings. */ |
| ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx); |
| if (ret_val < 0) |
| return ret_val; |
| |
| if (ret_val == 1) { |
| dev_dbg(&oct->pci_dev->dev, "Using default droq %d\n", q_no); |
| return 0; |
| } |
| |
| /* Enable the droq queues */ |
| octeon_set_droq_pkt_op(oct, q_no, 1); |
| |
| /* Send Credit for Octeon Output queues. Credits are always |
| * sent after the output queue is enabled. |
| */ |
| writel(oct->droq[q_no]->max_count, oct->droq[q_no]->pkts_credit_reg); |
| |
| return ret_val; |
| } |
| |
| /** Routine to push packets arriving on Octeon interface upto network layer. |
| * @param oct_id - octeon device id. |
| * @param skbuff - skbuff struct to be passed to network layer. |
| * @param len - size of total data received. |
| * @param rh - Control header associated with the packet |
| * @param param - additional control data with the packet |
| * @param arg - farg registered in droq_ops |
| */ |
| static void |
| liquidio_push_packet(u32 octeon_id __attribute__((unused)), |
| void *skbuff, |
| u32 len, |
| union octeon_rh *rh, |
| void *param, |
| void *arg) |
| { |
| struct net_device *netdev = (struct net_device *)arg; |
| struct octeon_droq *droq = |
| container_of(param, struct octeon_droq, napi); |
| struct sk_buff *skb = (struct sk_buff *)skbuff; |
| struct skb_shared_hwtstamps *shhwtstamps; |
| struct napi_struct *napi = param; |
| u16 vtag = 0; |
| u32 r_dh_off; |
| u64 ns; |
| |
| if (netdev) { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| int packet_was_received; |
| |
| /* Do not proceed if the interface is not in RUNNING state. */ |
| if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) { |
| recv_buffer_free(skb); |
| droq->stats.rx_dropped++; |
| return; |
| } |
| |
| skb->dev = netdev; |
| |
| skb_record_rx_queue(skb, droq->q_no); |
| if (likely(len > MIN_SKB_SIZE)) { |
| struct octeon_skb_page_info *pg_info; |
| unsigned char *va; |
| |
| pg_info = ((struct octeon_skb_page_info *)(skb->cb)); |
| if (pg_info->page) { |
| /* For Paged allocation use the frags */ |
| va = page_address(pg_info->page) + |
| pg_info->page_offset; |
| memcpy(skb->data, va, MIN_SKB_SIZE); |
| skb_put(skb, MIN_SKB_SIZE); |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, |
| pg_info->page, |
| pg_info->page_offset + |
| MIN_SKB_SIZE, |
| len - MIN_SKB_SIZE, |
| LIO_RXBUFFER_SZ); |
| } |
| } else { |
| struct octeon_skb_page_info *pg_info = |
| ((struct octeon_skb_page_info *)(skb->cb)); |
| skb_copy_to_linear_data(skb, page_address(pg_info->page) |
| + pg_info->page_offset, len); |
| skb_put(skb, len); |
| put_page(pg_info->page); |
| } |
| |
| r_dh_off = (rh->r_dh.len - 1) * BYTES_PER_DHLEN_UNIT; |
| |
| if (oct->ptp_enable) { |
| if (rh->r_dh.has_hwtstamp) { |
| /* timestamp is included from the hardware at |
| * the beginning of the packet. |
| */ |
| if (ifstate_check |
| (lio, |
| LIO_IFSTATE_RX_TIMESTAMP_ENABLED)) { |
| /* Nanoseconds are in the first 64-bits |
| * of the packet. |
| */ |
| memcpy(&ns, (skb->data + r_dh_off), |
| sizeof(ns)); |
| r_dh_off -= BYTES_PER_DHLEN_UNIT; |
| shhwtstamps = skb_hwtstamps(skb); |
| shhwtstamps->hwtstamp = |
| ns_to_ktime(ns + |
| lio->ptp_adjust); |
| } |
| } |
| } |
| |
| if (rh->r_dh.has_hash) { |
| __be32 *hash_be = (__be32 *)(skb->data + r_dh_off); |
| u32 hash = be32_to_cpu(*hash_be); |
| |
| skb_set_hash(skb, hash, PKT_HASH_TYPE_L4); |
| r_dh_off -= BYTES_PER_DHLEN_UNIT; |
| } |
| |
| skb_pull(skb, rh->r_dh.len * BYTES_PER_DHLEN_UNIT); |
| skb->protocol = eth_type_trans(skb, skb->dev); |
| |
| if ((netdev->features & NETIF_F_RXCSUM) && |
| (((rh->r_dh.encap_on) && |
| (rh->r_dh.csum_verified & CNNIC_TUN_CSUM_VERIFIED)) || |
| (!(rh->r_dh.encap_on) && |
| (rh->r_dh.csum_verified & CNNIC_CSUM_VERIFIED)))) |
| /* checksum has already been verified */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| else |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| /* Setting Encapsulation field on basis of status received |
| * from the firmware |
| */ |
| if (rh->r_dh.encap_on) { |
| skb->encapsulation = 1; |
| skb->csum_level = 1; |
| droq->stats.rx_vxlan++; |
| } |
| |
| /* inbound VLAN tag */ |
| if ((netdev->features & NETIF_F_HW_VLAN_CTAG_RX) && |
| rh->r_dh.vlan) { |
| u16 priority = rh->r_dh.priority; |
| u16 vid = rh->r_dh.vlan; |
| |
| vtag = (priority << VLAN_PRIO_SHIFT) | vid; |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vtag); |
| } |
| |
| packet_was_received = (napi_gro_receive(napi, skb) != GRO_DROP); |
| |
| if (packet_was_received) { |
| droq->stats.rx_bytes_received += len; |
| droq->stats.rx_pkts_received++; |
| } else { |
| droq->stats.rx_dropped++; |
| netif_info(lio, rx_err, lio->netdev, |
| "droq:%d error rx_dropped:%llu\n", |
| droq->q_no, droq->stats.rx_dropped); |
| } |
| |
| } else { |
| recv_buffer_free(skb); |
| } |
| } |
| |
| /** |
| * \brief wrapper for calling napi_schedule |
| * @param param parameters to pass to napi_schedule |
| * |
| * Used when scheduling on different CPUs |
| */ |
| static void napi_schedule_wrapper(void *param) |
| { |
| struct napi_struct *napi = param; |
| |
| napi_schedule(napi); |
| } |
| |
| /** |
| * \brief callback when receive interrupt occurs and we are in NAPI mode |
| * @param arg pointer to octeon output queue |
| */ |
| static void liquidio_napi_drv_callback(void *arg) |
| { |
| struct octeon_device *oct; |
| struct octeon_droq *droq = arg; |
| int this_cpu = smp_processor_id(); |
| |
| oct = droq->oct_dev; |
| |
| if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct) || |
| droq->cpu_id == this_cpu) { |
| napi_schedule_irqoff(&droq->napi); |
| } else { |
| call_single_data_t *csd = &droq->csd; |
| |
| csd->func = napi_schedule_wrapper; |
| csd->info = &droq->napi; |
| csd->flags = 0; |
| |
| smp_call_function_single_async(droq->cpu_id, csd); |
| } |
| } |
| |
| /** |
| * \brief Entry point for NAPI polling |
| * @param napi NAPI structure |
| * @param budget maximum number of items to process |
| */ |
| static int liquidio_napi_poll(struct napi_struct *napi, int budget) |
| { |
| struct octeon_instr_queue *iq; |
| struct octeon_device *oct; |
| struct octeon_droq *droq; |
| int tx_done = 0, iq_no; |
| int work_done; |
| |
| droq = container_of(napi, struct octeon_droq, napi); |
| oct = droq->oct_dev; |
| iq_no = droq->q_no; |
| |
| /* Handle Droq descriptors */ |
| work_done = octeon_process_droq_poll_cmd(oct, droq->q_no, |
| POLL_EVENT_PROCESS_PKTS, |
| budget); |
| |
| /* Flush the instruction queue */ |
| iq = oct->instr_queue[iq_no]; |
| if (iq) { |
| /* TODO: move this check to inside octeon_flush_iq, |
| * once check_db_timeout is removed |
| */ |
| if (atomic_read(&iq->instr_pending)) |
| /* Process iq buffers with in the budget limits */ |
| tx_done = octeon_flush_iq(oct, iq, budget); |
| else |
| tx_done = 1; |
| /* Update iq read-index rather than waiting for next interrupt. |
| * Return back if tx_done is false. |
| */ |
| /* sub-queue status update */ |
| lio_update_txq_status(oct, iq_no); |
| } else { |
| dev_err(&oct->pci_dev->dev, "%s: iq (%d) num invalid\n", |
| __func__, iq_no); |
| } |
| |
| #define MAX_REG_CNT 2000000U |
| /* force enable interrupt if reg cnts are high to avoid wraparound */ |
| if ((work_done < budget && tx_done) || |
| (iq && iq->pkt_in_done >= MAX_REG_CNT) || |
| (droq->pkt_count >= MAX_REG_CNT)) { |
| tx_done = 1; |
| napi_complete_done(napi, work_done); |
| |
| octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no, |
| POLL_EVENT_ENABLE_INTR, 0); |
| return 0; |
| } |
| |
| return (!tx_done) ? (budget) : (work_done); |
| } |
| |
| /** |
| * \brief Setup input and output queues |
| * @param octeon_dev octeon device |
| * @param ifidx Interface index |
| * |
| * Note: Queues are with respect to the octeon device. Thus |
| * an input queue is for egress packets, and output queues |
| * are for ingress packets. |
| */ |
| int liquidio_setup_io_queues(struct octeon_device *octeon_dev, int ifidx, |
| u32 num_iqs, u32 num_oqs) |
| { |
| struct octeon_droq_ops droq_ops; |
| struct net_device *netdev; |
| struct octeon_droq *droq; |
| struct napi_struct *napi; |
| int cpu_id_modulus; |
| int num_tx_descs; |
| struct lio *lio; |
| int retval = 0; |
| int q, q_no; |
| int cpu_id; |
| |
| netdev = octeon_dev->props[ifidx].netdev; |
| |
| lio = GET_LIO(netdev); |
| |
| memset(&droq_ops, 0, sizeof(struct octeon_droq_ops)); |
| |
| droq_ops.fptr = liquidio_push_packet; |
| droq_ops.farg = netdev; |
| |
| droq_ops.poll_mode = 1; |
| droq_ops.napi_fn = liquidio_napi_drv_callback; |
| cpu_id = 0; |
| cpu_id_modulus = num_present_cpus(); |
| |
| /* set up DROQs. */ |
| for (q = 0; q < num_oqs; q++) { |
| q_no = lio->linfo.rxpciq[q].s.q_no; |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "%s index:%d linfo.rxpciq.s.q_no:%d\n", |
| __func__, q, q_no); |
| retval = octeon_setup_droq( |
| octeon_dev, q_no, |
| CFG_GET_NUM_RX_DESCS_NIC_IF(octeon_get_conf(octeon_dev), |
| lio->ifidx), |
| CFG_GET_NUM_RX_BUF_SIZE_NIC_IF(octeon_get_conf(octeon_dev), |
| lio->ifidx), |
| NULL); |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "%s : Runtime DROQ(RxQ) creation failed.\n", |
| __func__); |
| return 1; |
| } |
| |
| droq = octeon_dev->droq[q_no]; |
| napi = &droq->napi; |
| dev_dbg(&octeon_dev->pci_dev->dev, "netif_napi_add netdev:%llx oct:%llx\n", |
| (u64)netdev, (u64)octeon_dev); |
| netif_napi_add(netdev, napi, liquidio_napi_poll, 64); |
| |
| /* designate a CPU for this droq */ |
| droq->cpu_id = cpu_id; |
| cpu_id++; |
| if (cpu_id >= cpu_id_modulus) |
| cpu_id = 0; |
| |
| octeon_register_droq_ops(octeon_dev, q_no, &droq_ops); |
| } |
| |
| if (OCTEON_CN23XX_PF(octeon_dev) || OCTEON_CN23XX_VF(octeon_dev)) { |
| /* 23XX PF/VF can send/recv control messages (via the first |
| * PF/VF-owned droq) from the firmware even if the ethX |
| * interface is down, so that's why poll_mode must be off |
| * for the first droq. |
| */ |
| octeon_dev->droq[0]->ops.poll_mode = 0; |
| } |
| |
| /* set up IQs. */ |
| for (q = 0; q < num_iqs; q++) { |
| num_tx_descs = CFG_GET_NUM_TX_DESCS_NIC_IF( |
| octeon_get_conf(octeon_dev), lio->ifidx); |
| retval = octeon_setup_iq(octeon_dev, ifidx, q, |
| lio->linfo.txpciq[q], num_tx_descs, |
| netdev_get_tx_queue(netdev, q)); |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| " %s : Runtime IQ(TxQ) creation failed.\n", |
| __func__); |
| return 1; |
| } |
| |
| /* XPS */ |
| if (!OCTEON_CN23XX_VF(octeon_dev) && octeon_dev->msix_on && |
| octeon_dev->ioq_vector) { |
| struct octeon_ioq_vector *ioq_vector; |
| |
| ioq_vector = &octeon_dev->ioq_vector[q]; |
| netif_set_xps_queue(netdev, |
| &ioq_vector->affinity_mask, |
| ioq_vector->iq_index); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static |
| int liquidio_schedule_msix_droq_pkt_handler(struct octeon_droq *droq, u64 ret) |
| { |
| struct octeon_device *oct = droq->oct_dev; |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| |
| if (droq->ops.poll_mode) { |
| droq->ops.napi_fn(droq); |
| } else { |
| if (ret & MSIX_PO_INT) { |
| if (OCTEON_CN23XX_VF(oct)) |
| dev_err(&oct->pci_dev->dev, |
| "should not come here should not get rx when poll mode = 0 for vf\n"); |
| tasklet_schedule(&oct_priv->droq_tasklet); |
| return 1; |
| } |
| /* this will be flushed periodically by check iq db */ |
| if (ret & MSIX_PI_INT) |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| irqreturn_t |
| liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev) |
| { |
| struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev; |
| struct octeon_device *oct = ioq_vector->oct_dev; |
| struct octeon_droq *droq = oct->droq[ioq_vector->droq_index]; |
| u64 ret; |
| |
| ret = oct->fn_list.msix_interrupt_handler(ioq_vector); |
| |
| if (ret & MSIX_PO_INT || ret & MSIX_PI_INT) |
| liquidio_schedule_msix_droq_pkt_handler(droq, ret); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * \brief Droq packet processor sceduler |
| * @param oct octeon device |
| */ |
| static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct) |
| { |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| struct octeon_droq *droq; |
| u64 oq_no; |
| |
| if (oct->int_status & OCT_DEV_INTR_PKT_DATA) { |
| for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES(oct); |
| oq_no++) { |
| if (!(oct->droq_intr & BIT_ULL(oq_no))) |
| continue; |
| |
| droq = oct->droq[oq_no]; |
| |
| if (droq->ops.poll_mode) { |
| droq->ops.napi_fn(droq); |
| oct_priv->napi_mask |= (1 << oq_no); |
| } else { |
| tasklet_schedule(&oct_priv->droq_tasklet); |
| } |
| } |
| } |
| } |
| |
| /** |
| * \brief Interrupt handler for octeon |
| * @param irq unused |
| * @param dev octeon device |
| */ |
| static |
| irqreturn_t liquidio_legacy_intr_handler(int irq __attribute__((unused)), |
| void *dev) |
| { |
| struct octeon_device *oct = (struct octeon_device *)dev; |
| irqreturn_t ret; |
| |
| /* Disable our interrupts for the duration of ISR */ |
| oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR); |
| |
| ret = oct->fn_list.process_interrupt_regs(oct); |
| |
| if (ret == IRQ_HANDLED) |
| liquidio_schedule_droq_pkt_handlers(oct); |
| |
| /* Re-enable our interrupts */ |
| if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET)) |
| oct->fn_list.enable_interrupt(oct, OCTEON_ALL_INTR); |
| |
| return ret; |
| } |
| |
| /** |
| * \brief Setup interrupt for octeon device |
| * @param oct octeon device |
| * |
| * Enable interrupt in Octeon device as given in the PCI interrupt mask. |
| */ |
| int octeon_setup_interrupt(struct octeon_device *oct, u32 num_ioqs) |
| { |
| struct msix_entry *msix_entries; |
| char *queue_irq_names = NULL; |
| int i, num_interrupts = 0; |
| int num_alloc_ioq_vectors; |
| char *aux_irq_name = NULL; |
| int num_ioq_vectors; |
| int irqret, err; |
| |
| oct->num_msix_irqs = num_ioqs; |
| if (oct->msix_on) { |
| if (OCTEON_CN23XX_PF(oct)) { |
| num_interrupts = MAX_IOQ_INTERRUPTS_PER_PF + 1; |
| |
| /* one non ioq interrupt for handling |
| * sli_mac_pf_int_sum |
| */ |
| oct->num_msix_irqs += 1; |
| } else if (OCTEON_CN23XX_VF(oct)) { |
| num_interrupts = MAX_IOQ_INTERRUPTS_PER_VF; |
| } |
| |
| /* allocate storage for the names assigned to each irq */ |
| oct->irq_name_storage = |
| kcalloc(num_interrupts, INTRNAMSIZ, GFP_KERNEL); |
| if (!oct->irq_name_storage) { |
| dev_err(&oct->pci_dev->dev, "Irq name storage alloc failed...\n"); |
| return -ENOMEM; |
| } |
| |
| queue_irq_names = oct->irq_name_storage; |
| |
| if (OCTEON_CN23XX_PF(oct)) |
| aux_irq_name = &queue_irq_names |
| [IRQ_NAME_OFF(MAX_IOQ_INTERRUPTS_PER_PF)]; |
| |
| oct->msix_entries = kcalloc(oct->num_msix_irqs, |
| sizeof(struct msix_entry), |
| GFP_KERNEL); |
| if (!oct->msix_entries) { |
| dev_err(&oct->pci_dev->dev, "Memory Alloc failed...\n"); |
| kfree(oct->irq_name_storage); |
| oct->irq_name_storage = NULL; |
| return -ENOMEM; |
| } |
| |
| msix_entries = (struct msix_entry *)oct->msix_entries; |
| |
| /*Assumption is that pf msix vectors start from pf srn to pf to |
| * trs and not from 0. if not change this code |
| */ |
| if (OCTEON_CN23XX_PF(oct)) { |
| for (i = 0; i < oct->num_msix_irqs - 1; i++) |
| msix_entries[i].entry = |
| oct->sriov_info.pf_srn + i; |
| |
| msix_entries[oct->num_msix_irqs - 1].entry = |
| oct->sriov_info.trs; |
| } else if (OCTEON_CN23XX_VF(oct)) { |
| for (i = 0; i < oct->num_msix_irqs; i++) |
| msix_entries[i].entry = i; |
| } |
| num_alloc_ioq_vectors = pci_enable_msix_range( |
| oct->pci_dev, msix_entries, |
| oct->num_msix_irqs, |
| oct->num_msix_irqs); |
| if (num_alloc_ioq_vectors < 0) { |
| dev_err(&oct->pci_dev->dev, "unable to Allocate MSI-X interrupts\n"); |
| kfree(oct->msix_entries); |
| oct->msix_entries = NULL; |
| kfree(oct->irq_name_storage); |
| oct->irq_name_storage = NULL; |
| return num_alloc_ioq_vectors; |
| } |
| |
| dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n"); |
| |
| num_ioq_vectors = oct->num_msix_irqs; |
| /** For PF, there is one non-ioq interrupt handler */ |
| if (OCTEON_CN23XX_PF(oct)) { |
| num_ioq_vectors -= 1; |
| |
| snprintf(aux_irq_name, INTRNAMSIZ, |
| "LiquidIO%u-pf%u-aux", oct->octeon_id, |
| oct->pf_num); |
| irqret = request_irq( |
| msix_entries[num_ioq_vectors].vector, |
| liquidio_legacy_intr_handler, 0, |
| aux_irq_name, oct); |
| if (irqret) { |
| dev_err(&oct->pci_dev->dev, |
| "Request_irq failed for MSIX interrupt Error: %d\n", |
| irqret); |
| pci_disable_msix(oct->pci_dev); |
| kfree(oct->msix_entries); |
| kfree(oct->irq_name_storage); |
| oct->irq_name_storage = NULL; |
| oct->msix_entries = NULL; |
| return irqret; |
| } |
| } |
| for (i = 0 ; i < num_ioq_vectors ; i++) { |
| if (OCTEON_CN23XX_PF(oct)) |
| snprintf(&queue_irq_names[IRQ_NAME_OFF(i)], |
| INTRNAMSIZ, "LiquidIO%u-pf%u-rxtx-%u", |
| oct->octeon_id, oct->pf_num, i); |
| |
| if (OCTEON_CN23XX_VF(oct)) |
| snprintf(&queue_irq_names[IRQ_NAME_OFF(i)], |
| INTRNAMSIZ, "LiquidIO%u-vf%u-rxtx-%u", |
| oct->octeon_id, oct->vf_num, i); |
| |
| irqret = request_irq(msix_entries[i].vector, |
| liquidio_msix_intr_handler, 0, |
| &queue_irq_names[IRQ_NAME_OFF(i)], |
| &oct->ioq_vector[i]); |
| |
| if (irqret) { |
| dev_err(&oct->pci_dev->dev, |
| "Request_irq failed for MSIX interrupt Error: %d\n", |
| irqret); |
| /** Freeing the non-ioq irq vector here . */ |
| free_irq(msix_entries[num_ioq_vectors].vector, |
| oct); |
| |
| while (i) { |
| i--; |
| /** clearing affinity mask. */ |
| irq_set_affinity_hint( |
| msix_entries[i].vector, |
| NULL); |
| free_irq(msix_entries[i].vector, |
| &oct->ioq_vector[i]); |
| } |
| pci_disable_msix(oct->pci_dev); |
| kfree(oct->msix_entries); |
| kfree(oct->irq_name_storage); |
| oct->irq_name_storage = NULL; |
| oct->msix_entries = NULL; |
| return irqret; |
| } |
| oct->ioq_vector[i].vector = msix_entries[i].vector; |
| /* assign the cpu mask for this msix interrupt vector */ |
| irq_set_affinity_hint(msix_entries[i].vector, |
| &oct->ioq_vector[i].affinity_mask |
| ); |
| } |
| dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: MSI-X enabled\n", |
| oct->octeon_id); |
| } else { |
| err = pci_enable_msi(oct->pci_dev); |
| if (err) |
| dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n", |
| err); |
| else |
| oct->flags |= LIO_FLAG_MSI_ENABLED; |
| |
| /* allocate storage for the names assigned to the irq */ |
| oct->irq_name_storage = kcalloc(1, INTRNAMSIZ, GFP_KERNEL); |
| if (!oct->irq_name_storage) |
| return -ENOMEM; |
| |
| queue_irq_names = oct->irq_name_storage; |
| |
| if (OCTEON_CN23XX_PF(oct)) |
| snprintf(&queue_irq_names[IRQ_NAME_OFF(0)], INTRNAMSIZ, |
| "LiquidIO%u-pf%u-rxtx-%u", |
| oct->octeon_id, oct->pf_num, 0); |
| |
| if (OCTEON_CN23XX_VF(oct)) |
| snprintf(&queue_irq_names[IRQ_NAME_OFF(0)], INTRNAMSIZ, |
| "LiquidIO%u-vf%u-rxtx-%u", |
| oct->octeon_id, oct->vf_num, 0); |
| |
| irqret = request_irq(oct->pci_dev->irq, |
| liquidio_legacy_intr_handler, |
| IRQF_SHARED, |
| &queue_irq_names[IRQ_NAME_OFF(0)], oct); |
| if (irqret) { |
| if (oct->flags & LIO_FLAG_MSI_ENABLED) |
| pci_disable_msi(oct->pci_dev); |
| dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n", |
| irqret); |
| kfree(oct->irq_name_storage); |
| oct->irq_name_storage = NULL; |
| return irqret; |
| } |
| } |
| return 0; |
| } |