diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index dafd001..4f82c85 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -930,6 +930,8 @@
 
 	l2cr=		[PPC]
 
+	l3cr=		[PPC]
+
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 7b4e8a7..1df9d4c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1269,10 +1269,6 @@
 
   Recommended properties:
 
-    - linux,network-index : This is the intended "index" of this
-      network device.  This is used by the bootwrapper to interpret
-      MAC addresses passed by the firmware when no information other
-      than indices is available to associate an address with a device.
     - phy-connection-type : a string naming the controller/PHY interface type,
       i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
       "tbi", or "rtbi".  This property is only really needed if the connection
@@ -1667,10 +1663,6 @@
    - phy-handle : The phandle for the PHY connected to this controller.
 
    Recommended properties:
-   - linux,network-index : This is the intended "index" of this
-     network device.  This is used by the bootwrapper to interpret
-     MAC addresses passed by the firmware when no information other
-     than indices is available to associate an address with a device.
    - phy-connection-type : a string naming the controller/PHY interface type,
      i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
      Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
@@ -1995,7 +1987,6 @@
 		interrupts = <20 8>;
 		interrupt-parent = <&PIC>;
 		phy-handle = <&PHY0>;
-		linux,network-index = <0>;
 		fsl,cpm-command = <12000300>;
 	};
 
@@ -2217,12 +2208,6 @@
 			  EMAC, that is the content of the current (bogus) "phy-port"
 			  property.
 
-    Recommended properties:
-    - linux,network-index : This is the intended "index" of this
-      network device.  This is used by the bootwrapper to interpret
-      MAC addresses passed by the firmware when no information other
-      than indices is available to associate an address with a device.
-
     Optional properties:
     - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
 			  a search is performed.
@@ -2246,7 +2231,6 @@
     Example:
 
 	EMAC0: ethernet@40000800 {
-		linux,network-index = <0>;
 		device_type = "network";
 		compatible = "ibm,emac-440gp", "ibm,emac";
 		interrupt-parent = <&UIC1>;
diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt
new file mode 100644
index 0000000..c4682b9
--- /dev/null
+++ b/Documentation/powerpc/phyp-assisted-dump.txt
@@ -0,0 +1,127 @@
+
+                   Hypervisor-Assisted Dump
+                   ------------------------
+                       November 2007
+
+The goal of hypervisor-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+As compared to kdump or other strategies, hypervisor-assisted
+dump offers several strong, practical advantages:
+
+-- Unlike kdump, the system has been reset, and loaded
+   with a fresh copy of the kernel.  In particular,
+   PCI and I/O devices have been reinitialized and are
+   in a clean, consistent state.
+-- As the dump is performed, the dumped memory becomes
+   immediately available to the system for normal use.
+-- After the dump is completed, no further reboots are
+   required; the system will be fully usable, and running
+   in it's normal, production mode on it normal kernel.
+
+The above can only be accomplished by coordination with,
+and assistance from the hypervisor. The procedure is
+as follows:
+
+-- When a system crashes, the hypervisor will save
+   the low 256MB of RAM to a previously registered
+   save region. It will also save system state, system
+   registers, and hardware PTE's.
+
+-- After the low 256MB area has been saved, the
+   hypervisor will reset PCI and other hardware state.
+   It will *not* clear RAM. It will then launch the
+   bootloader, as normal.
+
+-- The freshly booted kernel will notice that there
+   is a new node (ibm,dump-kernel) in the device tree,
+   indicating that there is crash data available from
+   a previous boot. It will boot into only 256MB of RAM,
+   reserving the rest of system memory.
+
+-- Userspace tools will parse /sys/kernel/release_region
+   and read /proc/vmcore to obtain the contents of memory,
+   which holds the previous crashed kernel. The userspace
+   tools may copy this info to disk, or network, nas, san,
+   iscsi, etc. as desired.
+
+   For Example: the values in /sys/kernel/release-region
+   would look something like this (address-range pairs).
+   CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
+   DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
+
+-- As the userspace tools complete saving a portion of
+   dump, they echo an offset and size to
+   /sys/kernel/release_region to release the reserved
+   memory back to general use.
+
+   An example of this is:
+     "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+   which will release 256MB at the 1GB boundary.
+
+Please note that the hypervisor-assisted dump feature
+is only available on Power6-based systems with recent
+firmware versions.
+
+Implementation details:
+----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on this particular machine. If it does, then
+we check to see if a active dump is waiting for us. If yes
+then everything but 256 MB of RAM is reserved during early
+boot. This area is released once we collect a dump from user
+land scripts that are run. If there is dump data, then
+the /sys/kernel/release_region file is created, and
+the reserved memory is held.
+
+If there is no waiting dump data, then only the highest
+256MB of the ram is reserved as a scratch area. This area
+is *not* released: this region will be kept permanently
+reserved, so that it can act as a receptacle for a copy
+of the low 256MB in the case a crash does occur. See,
+however, "open issues" below, as to whether
+such a reserved region is really needed.
+
+Currently the dump will be copied from /proc/vmcore to a
+a new file upon user intervention. The starting address
+to be read and the range for each data point in provided
+in /sys/kernel/release_region.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+General notes:
+--------------
+Security: please note that there are potential security issues
+with any sort of dump mechanism. In particular, plaintext
+(unencrypted) data, and possibly passwords, may be present in
+the dump data. Userspace tools must take adequate precautions to
+preserve security.
+
+Open issues/ToDo:
+------------
+ o The various code paths that tell the hypervisor that a crash
+   occurred, vs. it simply being a normal reboot, should be
+   reviewed, and possibly clarified/fixed.
+
+ o Instead of using /sys/kernel, should there be a /sys/dump
+   instead? There is a dump_subsys being created by the s390 code,
+   perhaps the pseries code should use a similar layout as well.
+
+ o Is reserving a 256MB region really required? The goal of
+   reserving a 256MB scratch area is to make sure that no
+   important crash data is clobbered when the hypervisor
+   save low mem to the scratch area. But, if one could assure
+   that nothing important is located in some 256MB area, then
+   it would not need to be reserved. Something that can be
+   improved in subsequent versions.
+
+ o Still working the kdump team to integrate this with kdump,
+   some work remains but this would not affect the current
+   patches.
+
+ o Still need to write a shell script, to copy the dump away.
+   Currently I am parsing it manually.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1189d8d..625342e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -91,6 +91,7 @@
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_LMB
 
 config EARLY_PRINTK
 	bool
@@ -210,14 +211,25 @@
 source kernel/Kconfig.preempt
 source "fs/Kconfig.binfmt"
 
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
 config FORCE_MAX_ZONEORDER
-	int
-	depends on PPC64
+	int "Maximum zone order"
 	default "9" if PPC_64K_PAGES
-	default "13"
+	default "13" if PPC64
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  For example, on 64-bit
+	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
+	  this in mind when choosing a value for this option.
 
 config HUGETLB_PAGE_SIZE_VARIABLE
 	bool
@@ -307,6 +319,16 @@
 
 	  Don't change this unless you know what you are doing.
 
+config PHYP_DUMP
+	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+	depends on PPC_PSERIES && EXPERIMENTAL
+	help
+	  Hypervisor-assisted dump is meant to be a kdump replacement
+	  offering robustness and speed not possible without system
+	  hypervisor assistence.
+
+	  If unsure, say "N"
+
 config PPCBUG_NVRAM
 	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
 	default y if PPC_PREP
@@ -490,6 +512,9 @@
  	bool
 	select PPC_INDIRECT_PCI
 
+config 4xx_SOC
+	bool
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ab5cfe8..dd80825 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -164,7 +164,7 @@
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-bootwrapper_install:
+bootwrapper_install %.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 1aded8f..7dcd9e9 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,6 +40,7 @@
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
 
 
 zlib       := inffast.c inflate.c inftrees.c
@@ -64,7 +65,8 @@
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
 		fixed-head.S ep88xc.c ep405.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
-		cuboot-warp.c cuboot-85xx-cpm2.c
+		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+		virtex405-head.S
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -216,6 +218,7 @@
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
 image-$(CONFIG_KATMAI)			+= cuImage.katmai
 image-$(CONFIG_WARP)			+= cuImage.warp
+image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_PPC_MPC86XADS)		+= cuImage.mpc866ads
@@ -255,6 +258,7 @@
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
 image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
+image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
@@ -285,11 +289,11 @@
 	$(call if_changed,wrap,$*)
 
 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+	$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+	$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
 
 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
 # prefix
@@ -302,14 +306,24 @@
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
+	$(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
 
 # If there isn't a platform selected then just strip the vmlinux.
 ifeq (,$(image-y))
@@ -326,7 +340,7 @@
 
 # anything not in $(targets)
 clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
-	otheros.bld
+	otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c
index 54b33f1..b82cacb 100644
--- a/arch/powerpc/boot/bamboo.c
+++ b/arch/powerpc/boot/bamboo.c
@@ -33,7 +33,8 @@
 	ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
-	dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
+	dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
+	dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
 }
 
 void bamboo_init(void *mac0, void *mac1)
diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c
index cf452b6..0a3fdde 100644
--- a/arch/powerpc/boot/cuboot-rainier.c
+++ b/arch/powerpc/boot/cuboot-rainier.c
@@ -42,7 +42,8 @@
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ibm4xx_denali_fixup_memsize();
-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 }
 
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c
index f555575..caf8f2e 100644
--- a/arch/powerpc/boot/cuboot-sequoia.c
+++ b/arch/powerpc/boot/cuboot-sequoia.c
@@ -42,7 +42,8 @@
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ibm4xx_denali_fixup_memsize();
-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 }
 
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c
index b55b804..9bc906a 100644
--- a/arch/powerpc/boot/cuboot-taishan.c
+++ b/arch/powerpc/boot/cuboot-taishan.c
@@ -40,7 +40,8 @@
 
 	ibm4xx_sdram_fixup_memsize();
 
-	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 }
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index 3db93e8..eb108a8 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -24,7 +24,7 @@
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
-	dt_fixup_mac_addresses(&bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
 }
 
 
diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c
new file mode 100644
index 0000000..cc6e338
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-yosemite.c
@@ -0,0 +1,44 @@
+/*
+ * Old U-boot compatibility for Yosemite
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void yosemite_fixups(void)
+{
+	unsigned long sysclk = 66666666;
+
+	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+	ibm4xx_sdram_fixup_memsize();
+	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = yosemite_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index 7dc37c9..ba2521b 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -204,7 +204,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
@@ -225,7 +224,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
new file mode 100644
index 0000000..6f3d38a
--- /dev/null
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -0,0 +1,402 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0e0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <a 4 b 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0f0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <10 4 11 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <180 62>;
+			num-tx-chans = <2>;
+			num-rx-chans = <10>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 6 4
+					/*RXEOB*/ 7 4
+					/*SERR*/  3 4
+					/*TXDE*/  4 4
+					/*RXDE*/  5 4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <b0000000 4 b0000000 50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				interrupts = <6 4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1d 4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <ef601500 8>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <ef601350 30>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <ef601450 30>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 10 4
+						 /*Wake*/   1 &UIC2 14 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 11 4
+						 /*Wake*/   1 &UIC2 15 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <c 0ec00000   8	/* Config space access */
+			       0 0 0		/* no IACK cycles */
+			       c 0ed00000   4   /* Special cycles */
+			       c 0ec80000 100	/* Internal registers */
+			       c 0ec80100  fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0 3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0000 0 0 0>;
+			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0>; /* port number */
+			reg = <d 00000000 20000000	/* Config space access */
+			       c 08010000 00001000>;	/* Registers */
+			dcr-reg = <100 020>;
+			sdr-base = <300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <40 7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <1>; /* port number */
+			reg = <d 20000000 20000000	/* Config space access */
+			       c 08011000 00001000>;	/* Registers */
+			dcr-reg = <120 020>;
+			sdr-base = <340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <80 bf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 0b000cb..5079dc8 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -241,7 +241,6 @@
 			};
 
 			EMAC0: ethernet@40000800 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
@@ -261,7 +260,6 @@
 				zmii-channel = <0>;
 			};
 			EMAC1: ethernet@40000900 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
new file mode 100644
index 0000000..958a5ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -0,0 +1,467 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,glacier";
+	compatible = "amcc,glacier", "amcc,canyonlands";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0e0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <a 4 b 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0f0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <10 4 11 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <180 62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <20>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 6 4
+					/*RXEOB*/ 7 4
+					/*SERR*/  3 4
+					/*TXDE*/  4 4
+					/*RXDE*/  5 4>;
+			desc-base-addr-high = <8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <b0000000 4 b0000000 50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				interrupts = <6 4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1d 4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460gt", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <ef601500 8>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef601600 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <ef601600 8>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <ef601350 30>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <ef601450 30>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 10 4
+						 /*Wake*/   1 &UIC2 14 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 11 4
+						 /*Wake*/   1 &UIC2 15 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 12 4
+						 /*Wake*/   1 &UIC2 16 4>;
+				reg = <ef601100 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <10>;
+				cell-index = <2>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef601200 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 13 4
+						 /*Wake*/   1 &UIC2 17 4>;
+				reg = <ef601200 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <18>;
+				cell-index = <3>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <c 0ec00000   8	/* Config space access */
+			       0 0 0		/* no IACK cycles */
+			       c 0ed00000   4   /* Special cycles */
+			       c 0ec80000 100	/* Internal registers */
+			       c 0ec80100  fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0 3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0000 0 0 0>;
+			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0>; /* port number */
+			reg = <d 00000000 20000000	/* Config space access */
+			       c 08010000 00001000>;	/* Registers */
+			dcr-reg = <100 020>;
+			sdr-base = <300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <40 7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <1>; /* port number */
+			reg = <d 20000000 20000000	/* Config space access */
+			       c 08011000 00001000>;	/* Registers */
+			dcr-reg = <120 020>;
+			sdr-base = <340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <80 bf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index ae68fef..b5d95ac 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -12,7 +12,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
-	compatible = "amcc,kilauea";
+	compatible = "amcc,haleakala", "amcc,kilauea";
 	dcr-parent = <&/cpus/cpu@0>;
 
 	aliases {
@@ -218,7 +218,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index fc86e5a..cc2873a 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -212,7 +212,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "gmii";
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 8baef61..48c9a6e 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -219,7 +219,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -247,7 +247,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
new file mode 100644
index 0000000..f869ce3c
--- /dev/null
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -0,0 +1,267 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KSI8560";
+	compatible = "emerson,KSI8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;		/* L1, 32K */
+			i-cache-size = <0x8000>;		/* L1, 32K */
+			timebase-frequency = <0>;		/* From U-boot */
+			bus-frequency = <0>;			/* From U-boot */
+			clock-frequency = <0>;			/* From U-boot */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x00000000 0xfdf00000 0x00100000>;
+		bus-frequency = <0>;				/* Fixed by bootwrapper */
+
+		memory-controller@2000 {
+			compatible = "fsl,8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x12 0x2>;
+		};
+
+		l2-cache-controller@20000 {
+			compatible = "fsl,8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <0x20>;		/* 32 bytes */
+			cache-size = <0x40000>;			/* L2, 256K */
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x10 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&MPIC>;
+			dfsrr;
+		};
+
+		mdio@24520 {					/* For TSECs */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			PHY1: ethernet-phy@1 {
+				interrupt-parent = <&MPIC>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+
+			PHY2: ethernet-phy@2 {
+				interrupt-parent = <&MPIC>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&MPIC>;
+			phy-handle = <&PHY1>;
+		};
+
+		enet1: ethernet@25000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+			interrupt-parent = <&MPIC>;
+			phy-handle = <&PHY2>;
+		};
+
+		MPIC: pic@40000 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+					     "fsl,cpm2-brg",
+					     "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;	/* 166MHz */
+			};
+
+			CPMPIC: pic@90c00 {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupts = <0x2e 0x2>;
+				interrupt-parent = <&MPIC>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x28 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x29 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			mdio@90d00 {				/* For FCCs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x90d00 0x14>;
+				fsl,mdio-pin = <24>;
+				fsl,mdc-pin = <25>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&MPIC>;
+					reg = <0x0>;
+					device_type = "ethernet-phy";
+				};
+			};
+
+			enet2: ethernet@91300 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+					     "fsl,cpm2-fcc-enet";
+				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+				/* Mac address filled in by bootwrapper */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x12000300>;
+				interrupts = <0x20 0x8>;
+				interrupt-parent = <&CPMPIC>;
+				phy-handle = <&PHY0>;
+			};
+		};
+	};
+
+	localbus@fdf05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8560-localbus";
+		reg = <0xfdf05000 0x68>;
+
+		ranges = <0x0 0x0 0xe0000000 0x00800000
+			  0x4 0x0 0xe8080000 0x00080000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <0x2>;
+
+			partition@0 {
+				label = "Primary Kernel";
+				reg = <0x0 0x180000>;
+			};
+			partition@180000 {
+				label = "Primary Filesystem";
+				reg = <0x180000 0x580000>;
+			};
+			partition@700000 {
+				label = "Monitor";
+				reg = <0x300000 0x100000>;
+				read-only;
+			};
+		};
+
+		cpld@4,0 {
+			compatible = "emerson,KSI8560-cpld";
+			reg = <0x4 0x0 0x80000>;
+		};
+	};
+
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@91a00";
+	};
+};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 710c011..84cc5e7 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -219,7 +219,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -247,7 +247,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index f947c75..6a8fa70 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -254,7 +254,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
@@ -270,7 +269,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -284,7 +283,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
@@ -300,7 +298,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 8db9515..a1ae4d6 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -269,7 +269,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
@@ -285,7 +284,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -299,7 +298,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
@@ -315,7 +313,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 8278068..e808e1c 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -104,6 +104,16 @@
 		// FIXME: anything else?
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+		dcr-reg = <20 8			/* Internal SRAM DCR's */
+			   30 8>;		/* L2 cache DCR's */
+		cache-line-size = <20>;		/* 32 bytes */
+		cache-size = <40000>;		/* L2, 256K */
+		interrupt-parent = <&UIC2>;
+		interrupts = <17 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-440gx", "ibm,plb4";
 		#address-cells = <2>;
@@ -232,10 +242,18 @@
 				reg = <40000790 8>;
 			};
 
+			TAH0: emac-tah@40000b50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <40000b50 30>;
+			};
+
+			TAH1: emac-tah@40000d50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <40000d50 30>;
+			};
 
 			EMAC0: ethernet@40000800 {
 				unused = <1>;
-				linux,network-index = <2>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
@@ -256,7 +274,6 @@
 			};
 		 	EMAC1: ethernet@40000900 {
 				unused = <1>;
-				linux,network-index = <3>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
@@ -277,7 +294,6 @@
 			};
 
 		 	EMAC2: ethernet@40000c00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
@@ -288,7 +304,7 @@
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -297,10 +313,11 @@
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <2>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
 			};
 
 		 	EMAC3: ethernet@40000e00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
@@ -311,7 +328,7 @@
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -320,6 +337,8 @@
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <3>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
 			};
 
 
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index dcc21b0..a328607 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -125,7 +125,6 @@
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index dc1499d..b04a52e 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -204,7 +204,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
new file mode 100644
index 0000000..0d6d332
--- /dev/null
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -0,0 +1,304 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,yosemite";
+	compatible = "amcc,yosemite","amcc,bamboo";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <100 027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <180 62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+					/*RXEOB*/ 1 &UIC0 b 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+			ranges = <00000000 0 00000000 80000000
+			          80000000 0 80000000 80000000>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <7 4>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <1c200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+				status = "disabled";
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <4 4>;
+				status = "disabled";
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			spi@ef600900 {
+				compatible = "amcc,spi-440ep";
+				reg = <ef600900 6>;
+				interrupts = <8 4>;
+				interrupt-parent = <&UIC0>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <1c 4 1d 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4 1f 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <ef601000 80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 eec00000 8	/* Config space access */
+			       0 eed00000 4	/* IACK */
+			       0 eed00000 4	/* Special cycle */
+			       0 ef400000 40>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+				  01000000 0 00000000 0 e8000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* Bamboo has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0800 0 0 0 &UIC0 1c 8
+
+				/* IDSEL 2 */
+				1000 0 0 0 &UIC0 1b 8
+
+				/* IDSEL 3 */
+				1800 0 0 0 &UIC0 1a 8
+
+				/* IDSEL 4 */
+				2000 0 0 0 &UIC0 19 8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
index f61364c..5532ab3 100644
--- a/arch/powerpc/boot/ebony.c
+++ b/arch/powerpc/boot/ebony.c
@@ -75,7 +75,8 @@
 
 	ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
 	ibm4xx_sdram_fixup_memsize();
-	dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+	dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+	dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ebony_flashsel_fixup();
 }
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index 59016be..c541fd8 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -35,7 +35,7 @@
 #define check_err(err) \
 	({ \
 		if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
-			printf("%s():%d  %s\n\r", __FUNCTION__, __LINE__, \
+			printf("%s():%d  %s\n\r", __func__, __LINE__, \
 			       fdt_strerror(err)); \
 		if (BAD_ERROR(err)) \
 			exit(); \
diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S
index a55c273..b6fcbaf 100644
--- a/arch/powerpc/boot/ps3-head.S
+++ b/arch/powerpc/boot/ps3-head.S
@@ -27,8 +27,9 @@
 /*
  * __system_reset_overlay - The PS3 first stage entry.
  *
- * The bootwraper build script copies the 0x100 bytes at symbol
- * __system_reset_overlay to offset 0x100 of the rom image.
+ * The bootwraper build script copies the 512 bytes at symbol
+ * __system_reset_overlay to offset 0x100 of the rom image.  This symbol
+ * must occupy 512 or less bytes.
  *
  * The PS3 has a single processor with two threads.
  */
@@ -47,8 +48,6 @@
 
 	mfspr	r3, 0x88
 	cntlzw.	r3, r3
-	li	r4, 0
-	li	r5, 0
 	beq	1f
 
 	/* Secondary goes to __secondary_hold in kernel. */
@@ -57,8 +56,14 @@
 	mtctr	r4
 	bctr
 
-	/* Primary delays then goes to _zimage_start in wrapper. */
 1:
+	/* Save the value at addr zero for a null pointer write check later. */
+
+	li	r4, 0
+	lwz	r3, 0(r4)
+
+	/* Primary delays then goes to _zimage_start in wrapper. */
+
 	or	31, 31, 31 /* db16cyc */
 	or	31, 31, 31 /* db16cyc */
 
@@ -67,16 +72,18 @@
 	mtctr	r4
 	bctr
 
+	. = __system_reset_overlay + 512
+
 /*
  * __system_reset_kernel - Place holder for the kernel reset vector.
  *
- * The bootwrapper build script copies 0x100 bytes from offset 0x100
+ * The bootwrapper build script copies 512 bytes from offset 0x100
  * of the rom image to the symbol __system_reset_kernel.  At runtime
- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
- * to ram address 0x100.  This symbol must occupy 0x100 bytes.
+ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
+ * to ram address 0x100.  This symbol must occupy 512 bytes.
  */
 
 	.globl __system_reset_kernel
 __system_reset_kernel:
 
-	. = __system_reset_kernel + 0x100
+	. = __system_reset_kernel + 512
diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c
index 3b0ac4d..9954d98 100644
--- a/arch/powerpc/boot/ps3.c
+++ b/arch/powerpc/boot/ps3.c
@@ -27,10 +27,10 @@
 #include "page.h"
 #include "ops.h"
 
-extern s64 lv1_panic(u64 in_1);
-extern s64 lv1_get_logical_partition_id(u64 *out_1);
-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+extern int lv1_panic(u64 in_1);
+extern int lv1_get_logical_partition_id(u64 *out_1);
+extern int lv1_get_logical_ppe_id(u64 *out_1);
+extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
 	u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
 
 #ifdef DEBUG
@@ -46,6 +46,7 @@
  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
  * The buffer is put in it's own section so that tools may locate it easier.
  */
+
 static char cmdline[COMMAND_LINE_SIZE]
 	__attribute__((__section__("__builtin_cmdline")));
 
@@ -75,7 +76,7 @@
 
 static int ps3_repository_read_rm_size(u64 *rm_size)
 {
-	s64 result;
+	int result;
 	u64 lpar_id;
 	u64 ppe_id;
 	u64 v2;
@@ -114,16 +115,17 @@
 {
 	extern char __system_reset_kernel[];
 
-	memcpy((void *)0x100, __system_reset_kernel, 0x100);
-	flush_cache((void *)0x100, 0x100);
+	memcpy((void *)0x100, __system_reset_kernel, 512);
+	flush_cache((void *)0x100, 512);
 }
 
-void platform_init(void)
+void platform_init(unsigned long null_check)
 {
 	const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
 	void *chosen;
 	unsigned long ft_addr;
 	u64 rm_size;
+	unsigned long val;
 
 	console_ops.write = ps3_console_write;
 	platform_ops.exit = ps3_exit;
@@ -151,6 +153,11 @@
 
 	printf(" flat tree at 0x%lx\n\r", ft_addr);
 
+	val = *(unsigned long *)0;
+
+	if (val != null_check)
+		printf("null check failed: %lx != %lx\n\r", val, null_check);
+
 	((kernel_entry_t)0)(ft_addr, 0, NULL);
 
 	ps3_exit();
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
new file mode 100644
index 0000000..86cd285
--- /dev/null
+++ b/arch/powerpc/boot/simpleboot.c
@@ -0,0 +1,84 @@
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ *                        tree or any platform configuration information.
+ *                        All data is extracted from an embedded device tree
+ *                        blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ *          Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	const u32 *na, *ns, *reg, *timebase;
+	u64 memsize64;
+	int node, size, i;
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	/* Find the #address-cells and #size-cells properties */
+	node = fdt_path_offset(_dtb_start, "/");
+	if (node < 0)
+		fatal("Cannot find root node\n");
+	na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+	if (!na || (size != 4))
+		fatal("Cannot find #address-cells property");
+	ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+	if (!ns || (size != 4))
+		fatal("Cannot find #size-cells property");
+
+	/* Find the memory range */
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "memory", sizeof("memory"));
+	if (node < 0)
+		fatal("Cannot find memory node\n");
+	reg = fdt_getprop(_dtb_start, node, "reg", &size);
+	if (size < (*na+*ns) * sizeof(u32))
+		fatal("cannot get memory range\n");
+
+	/* Only interested in memory based at 0 */
+	for (i = 0; i < *na; i++)
+		if (*reg++ != 0)
+			fatal("Memory range is not based at address 0\n");
+
+	/* get the memsize and trucate it to under 4G on 32 bit machines */
+	memsize64 = 0;
+	for (i = 0; i < *ns; i++)
+		memsize64 = (memsize64 << 32) | *reg++;
+	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+		memsize64 = 0xffffffff;
+
+	/* finally, setup the timebase */
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	/* Now we have the memory size; initialize the heap */
+	simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+	/* prepare the device tree and find the console */
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c
index 472e366..097974e 100644
--- a/arch/powerpc/boot/treeboot-walnut.c
+++ b/arch/powerpc/boot/treeboot-walnut.c
@@ -68,7 +68,7 @@
 	ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
 	ibm4xx_fixup_ebc_ranges("/plb/ebc");
 	walnut_flashsel_fixup();
-	dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
+	dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
 }
 
 void platform_init(void)
diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S
new file mode 100644
index 0000000..3edb13f
--- /dev/null
+++ b/arch/powerpc/boot/virtex405-head.S
@@ -0,0 +1,30 @@
+#include "ppc_asm.h"
+
+	.text
+	.global _zimage_start
+_zimage_start:
+
+	/* PPC errata 213: needed by Virtex-4 FX */
+	mfccr0  0
+	oris    0,0,0x50000000@h
+	mtccr0  0
+
+	/*
+	 * Invalidate the data cache if the data cache is turned off.
+	 * - The 405 core does not invalidate the data cache on power-up
+	 *   or reset but does turn off the data cache. We cannot assume
+	 *   that the cache contents are valid.
+	 * - If the data cache is turned on this must have been done by
+	 *   a bootloader and we assume that the cache contents are
+	 *   valid.
+	 */
+	mfdccr	r9
+	cmplwi	r9,0
+	bne	2f
+	lis	r9,0
+	li	r8,256
+	mtctr	r8
+1:	dccci	r0,r9
+	addi	r9,r9,0x20
+	bdnz	1b
+2:	b	_zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 8f8b849..14a0182 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,7 +174,7 @@
     *-mpc83*)
         platformo=$object/cuboot-83xx.o
         ;;
-    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
+    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
     *-mpc85*|*-tqm8540|*-sbc85*)
@@ -199,6 +199,10 @@
     platformo="$object/fixed-head.o $object/redboot-8xx.o"
     binary=y
     ;;
+simpleboot-virtex405-*)
+    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -298,15 +302,16 @@
     exit 0
     ;;
 ps3)
-    # The ps3's loader supports loading gzipped binary images from flash
-    # rom to addr zero. The loader enters the image at addr 0x100.  A
-    # bootwrapper overlay is use to arrange for the kernel to be loaded
-    # to addr zero and to have a suitable bootwrapper entry at 0x100.
-    # To construct the rom image, 0x100 bytes from offset 0x100 in the
-    # kernel is copied to the bootwrapper symbol __system_reset_kernel.
-    # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
-    # then copied to offset 0x100.  At runtime the bootwrapper program
-    # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+    # The ps3's loader supports loading a gzipped binary image from flash
+    # rom to ram addr zero. The loader then enters the system reset
+    # vector at addr 0x100.  A bootwrapper overlay is used to arrange for
+    # a binary image of the kernel to be at addr zero, and yet have a
+    # suitable bootwrapper entry at 0x100.  To construct the final rom
+    # image 512 bytes from offset 0x100 is copied to the bootwrapper
+    # place holder at symbol __system_reset_kernel.  The 512 bytes of the
+    # bootwrapper entry code at symbol __system_reset_overlay is then
+    # copied to offset 0x100.  At runtime the bootwrapper program copies
+    # the data at __system_reset_kernel back to addr 0x100.
 
     system_reset_overlay=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_overlay$'       \
@@ -317,7 +322,7 @@
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
     overlay_dest="256"
-    overlay_size="256"
+    overlay_size="512"
 
     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
diff --git a/arch/powerpc/configs/canyonlands_defconfig b/arch/powerpc/configs/canyonlands_defconfig
new file mode 100644
index 0000000..a3b763c
--- /dev/null
+++ b/arch/powerpc/configs/canyonlands_defconfig
@@ -0,0 +1,721 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 38b85b2..d7fd298 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:33:36 2008
+# Thu Mar 27 13:55:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -74,8 +74,6 @@
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -243,7 +241,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -1328,6 +1326,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0f82f66..a20501f 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:36:41 2008
+# Thu Mar 27 13:55:43 2008
 #
 CONFIG_PPC64=y
 
@@ -77,8 +77,6 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -276,7 +274,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -1596,6 +1594,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 8d9a84f..b3128fb 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:43:46 2008
+# Thu Mar 27 13:55:45 2008
 #
 CONFIG_PPC64=y
 
@@ -77,8 +77,6 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -261,7 +259,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -1065,6 +1063,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/ksi8560_defconfig b/arch/powerpc/configs/ksi8560_defconfig
new file mode 100644
index 0000000..2d0debc
--- /dev/null
+++ b/arch/powerpc/configs/ksi8560_defconfig
@@ -0,0 +1,899 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Mon Feb 11 16:25:19 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_KSI8560=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b810d0..7a166a3 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -333,7 +333,7 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -374,6 +374,7 @@
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
 CONFIG_IDE_TASK_IOCTL=y
 CONFIG_IDE_PROC_FS=y
 
@@ -427,10 +428,129 @@
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -536,6 +656,7 @@
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -783,12 +904,14 @@
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
 
 #
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 558b0d3..fca1142 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:05:14 2008
+# Thu Mar 27 13:56:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -77,8 +77,6 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -272,7 +270,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
@@ -1895,6 +1893,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 57bd775..12f9b5a 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:57:35 2008
+# Linux kernel version: 2.6.25-rc6
+# Sat Apr  5 09:35:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -79,6 +79,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +114,7 @@
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -143,7 +145,6 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
@@ -161,12 +162,15 @@
 CONFIG_KATMAI=y
 CONFIG_RAINIER=y
 CONFIG_WARP=y
+CONFIG_CANYONLANDS=y
+CONFIG_YOSEMITE=y
 CONFIG_440EP=y
 CONFIG_440EPX=y
 CONFIG_440GRX=y
 CONFIG_440GP=y
 CONFIG_440GX=y
 CONFIG_440SPe=y
+CONFIG_460EX=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -199,7 +203,6 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -232,6 +235,7 @@
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -678,6 +682,7 @@
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -805,6 +810,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 880ab7ad..970282b 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:06:28 2008
+# Thu Mar 27 13:56:24 2008
 #
 CONFIG_PPC64=y
 
@@ -84,8 +84,6 @@
 # CONFIG_CGROUP_NS is not set
 CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
@@ -289,6 +287,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -335,7 +334,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
@@ -1881,6 +1880,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 755aca7..3e2593c 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:08:01 2008
+# Thu Mar 27 13:56:28 2008
 #
 CONFIG_PPC64=y
 
@@ -83,8 +83,6 @@
 CONFIG_CGROUP_NS=y
 CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
@@ -237,6 +235,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=4
@@ -283,7 +282,7 @@
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=m
@@ -1519,6 +1518,7 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 4b749c4..e932b43 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -26,8 +26,6 @@
 #ifdef CONFIG_PPC64
 #include <linux/time.h>
 #include <linux/hardirq.h>
-#else
-#include <linux/ptrace.h>
 #endif
 
 #include <asm/io.h>
@@ -60,7 +58,6 @@
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
 #endif /* CONFIG_PPC64 */
 
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
@@ -80,7 +77,6 @@
 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-	DEFINE(PT_PTRACED, PT_PTRACED);
 #endif
 #ifdef CONFIG_SPE
 	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 80e2eef..9f93777 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,6 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/lmb.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
@@ -15,7 +16,7 @@
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/udbg.h>
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 6250443..5465e8d 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -3,7 +3,7 @@
  * Valentine Barshak <vbarshak@ru.mvista.com>
  * MontaVista Software, Inc (c) 2007
  *
- * Based on cpu_setup_6xx code by 
+ * Based on cpu_setup_6xx code by
  * Benjamin Herrenschmidt <benh@kernel.crashing.org>
  *
  * This program is free software; you can redistribute it and/or
@@ -32,6 +32,9 @@
 	bl	__fixup_440A_mcheck
 	mtlr	r4
 	blr
+_GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
+	b	__init_fpu_44x
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a8f5cc..26ffb44 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -36,6 +36,8 @@
 extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -1397,6 +1399,30 @@
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460EX */
+		.pvr_mask		= 0xffff0002,
+		.pvr_value		= 0x13020002,
+		.cpu_name		= "460EX",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460ex,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
+	{ /* 460GT */
+		.pvr_mask		= 0xffff0002,
+		.pvr_value		= 0x13020000,
+		.cpu_name		= "460GT",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
 #ifdef CONFIG_E200
@@ -1512,7 +1538,7 @@
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
-			/* ppc64 and booke expect identify_cpu to also call 
+			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
 			 * that at a later time, for now, just use #ifdef.
 			 * we also don't need to PTRRELOC the function pointer
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 571132e..eae401d 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,12 +24,13 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
 #include <asm/kexec.h>
 #include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/firmware.h>
 #include <asm/smp.h>
 #include <asm/system.h>
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 29ff77c..9ee3c52 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,8 +13,9 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 #include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/firmware.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0f4fac5..c16d135 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -763,23 +763,6 @@
 	b	fast_exception_return
 
 /*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
-	lwz	r3,_MSR(r1)
-	oris	r3,r3,MSR_VEC@h
-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
-	lis	r3,87f@h
-	ori	r3,r3,87f@l
-	mr	r4,r2		/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
-	.align	4,0
-
-/*
  * giveup_altivec(tsk)
  * Disable AltiVec for the task given as the argument,
  * and save the AltiVec registers in its thread_struct.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 2f50bb5..9971159 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -183,7 +183,7 @@
 		ret = ibmebus_create_device(child);
 		if (ret) {
 			printk(KERN_ERR "%s: failed to create device (%i)",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			of_node_put(child);
 			break;
 		}
@@ -269,7 +269,7 @@
 	if (bus_find_device(&ibmebus_bus_type, NULL, path,
 			    ibmebus_match_path)) {
 		printk(KERN_WARNING "%s: %s has already been probed\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 		rc = -EEXIST;
 		goto out;
 	}
@@ -279,7 +279,7 @@
 		of_node_put(dn);
 	} else {
 		printk(KERN_WARNING "%s: no such device node: %s\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 		rc = -ENODEV;
 	}
 
@@ -308,7 +308,7 @@
 		return count;
 	} else {
 		printk(KERN_WARNING "%s: %s not on the bus\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 
 		kfree(path);
 		return -ENODEV;
@@ -337,14 +337,14 @@
 	err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
 	if (err) {
 		printk(KERN_ERR "%s: failed to register IBM eBus.\n",
-		       __FUNCTION__);
+		       __func__);
 		return err;
 	}
 
 	err = device_register(&ibmebus_bus_device);
 	if (err) {
 		printk(KERN_WARNING "%s: device_register returned %i\n",
-		       __FUNCTION__, err);
+		       __func__, err);
 		bus_unregister(&ibmebus_bus_type);
 
 		return err;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8f1f4e5..0c66366 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -520,7 +520,7 @@
 	unsigned int order;
 
 	if (!tbl || !tbl->it_map) {
-		printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
 				node_name);
 		return;
 	}
@@ -530,7 +530,7 @@
 	for (i = 0; i < (tbl->it_size/64); i++) {
 		if (tbl->it_map[i] != 0) {
 			printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
-				__FUNCTION__, node_name);
+				__func__, node_name);
 			break;
 		}
 	}
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index ee172aa..289af34 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -80,13 +80,13 @@
 	 *			(size depending on dev->n_addr_cells)
 	 *   cell 5:		the size of the range
 	 */
-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
+	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
 		range++;
 		rlen -= sizeof(struct isa_range);
 		if (rlen < sizeof(struct isa_range))
 			goto inval_range;
 	}
-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
+	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
 		goto inval_range;
 
 	isa_addr = range->isa_addr.a_lo;
@@ -99,7 +99,7 @@
 	 */
 	if ((pci_addr != 0) || (isa_addr != 0)) {
 		printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index dcb89a8..1ffacc6 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -226,7 +226,7 @@
 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
 		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
-		       __FILE__, __FUNCTION__, __LINE__);
+		       __FILE__, __func__, __LINE__);
 		return;
 	}
 
@@ -243,14 +243,14 @@
 	if (call_status != 0) {
 		printk(KERN_INFO
 		       "%s %s Error calling get-system-parameter (0x%x)\n",
-		       __FILE__, __FUNCTION__, call_status);
+		       __FILE__, __func__, call_status);
 	} else {
 		int splpar_strlen;
 		int idx, w_idx;
 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 		if (!workbuffer) {
 			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
-			       __FILE__, __FUNCTION__, __LINE__);
+			       __FILE__, __func__, __LINE__);
 			kfree(local_buffer);
 			return;
 		}
@@ -484,10 +484,10 @@
 	current_weight = (resource >> 5 * 8) & 0xFF;
 
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __FUNCTION__, current_entitled, current_weight);
+		 __func__, current_entitled, current_weight);
 
 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+		 __func__, *new_entitled_ptr, *new_weight_ptr);
 
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
 				    *new_weight_ptr);
@@ -502,7 +502,7 @@
 		retval = -EINVAL;
 	} else {
 		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __FUNCTION__, retval);
+		       __func__, retval);
 		retval = -EIO;
 	}
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c0c8e8c..2d202f2 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,8 +12,9 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
+#include <linux/lmb.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 9c98424..5a4c76e 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -58,7 +58,6 @@
 extern void single_step_exception(struct pt_regs *regs);
 extern int sys_sigreturn(struct pt_regs *regs);
 
-EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
@@ -79,6 +78,7 @@
 EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
 
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
@@ -192,3 +192,4 @@
 EXPORT_SYMBOL(__mtdcr);
 EXPORT_SYMBOL(__mfdcr);
 #endif
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4ec6055..a279102 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -868,11 +868,6 @@
 	flush_spe_to_thread(current);
 	error = do_execve(filename, (char __user * __user *) a1,
 			  (char __user * __user *) a2, regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index eac97f4..31d5b22 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,10 +31,10 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
-#include <asm/lmb.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/irq.h>
@@ -51,6 +51,7 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
 #include <asm/kexec.h>
 
 #ifdef DEBUG
@@ -436,7 +437,7 @@
  * The device tree may be allocated beyond our memory limit, or inside the
  * crash kernel region for kdump. If so, move it out of the way.
  */
-static void move_device_tree(void)
+static void __init move_device_tree(void)
 {
 	unsigned long start, size;
 	void *p;
@@ -1040,6 +1041,56 @@
 #endif
 }
 
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+	unsigned long base, size;
+	if (!phyp_dump_info->phyp_dump_configured) {
+		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+		return;
+	}
+
+	if (!phyp_dump_info->phyp_dump_at_boot) {
+		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+		return;
+	}
+
+	if (phyp_dump_info->phyp_dump_is_active) {
+		/* Reserve *everything* above RMR.Area freed by userland tools*/
+		base = PHYP_DUMP_RMR_END;
+		size = lmb_end_of_DRAM() - base;
+
+		/* XXX crashed_ram_end is wrong, since it may be beyond
+		 * the memory_limit, it will need to be adjusted. */
+		lmb_reserve(base, size);
+
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	} else {
+		size = phyp_dump_info->cpu_state_size +
+			phyp_dump_info->hpte_region_size +
+			PHYP_DUMP_RMR_END;
+		base = lmb_end_of_DRAM() - size;
+		lmb_reserve(base, size);
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	}
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
+
+
 void __init early_init_devtree(void *params)
 {
 	DBG(" -> early_init_devtree(%p)\n", params);
@@ -1052,6 +1103,11 @@
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 #endif
 
+#ifdef CONFIG_PHYP_DUMP
+	/* scan tree to see if dump occured during last boot */
+	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
@@ -1072,6 +1128,7 @@
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
+	phyp_dump_reserve_mem();
 
 	lmb_enforce_memory_limit(memory_limit);
 	lmb_analyze();
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 52e95c2..eb3beea 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,6 +22,7 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -34,7 +35,6 @@
 #include <asm/system.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
-#include <asm/lmb.h>
 #include <asm/udbg.h>
 #include <asm/syscalls.h>
 #include <asm/smp.h>
@@ -507,7 +507,7 @@
 			break;
 		default:
 			printk(KERN_ERR "%s: unexpected RTAS error %d\n",
-					__FUNCTION__, rtas_rc);
+					__func__, rtas_rc);
 			rc = -ERANGE;
 			break;
 	}
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 538baf4..627f126 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -807,7 +807,7 @@
 				rtas_block_ctor);
 	if (!flash_block_cache) {
 		printk(KERN_ERR "%s: failed to create block cache\n",
-				__FUNCTION__);
+				__func__);
 		rc = -ENOMEM;
 		goto cleanup;
 	}
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 433a0a0..3ab88a9 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -56,21 +56,6 @@
 	return 0;
 }
 
-static int of_device_available(struct device_node * dn)
-{
-        const char *status;
-
-        status = of_get_property(dn, "status", NULL);
-
-        if (!status)
-                return 1;
-
-        if (!strcmp(status, "okay"))
-                return 1;
-
-        return 0;
-}
-
 int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
 	int returnval = -1;
@@ -117,7 +102,7 @@
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		struct pci_dn *pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_available(dn))
+		    && of_device_is_available(dn))
 			return rtas_read_config(pdn, where, size, val);
 	}
 
@@ -164,7 +149,7 @@
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		struct pci_dn *pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_available(dn))
+		    && of_device_is_available(dn))
 			return rtas_write_config(pdn, where, size, val);
 	}
 	return PCIBIOS_DEVICE_NOT_FOUND;
@@ -326,7 +311,7 @@
 
 	res = b->resource[0];
 	if (!res->flags) {
-		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
 				b->name);
 		return 1;
 	}
@@ -334,13 +319,13 @@
 	rc = pcibios_unmap_io_space(b);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
-			__FUNCTION__, b->name);
+			__func__, b->name);
 		return 1;
 	}
 
 	if (release_resource(res)) {
 		printk(KERN_ERR "%s: failed to release IO on bus %s\n",
-				__FUNCTION__, b->name);
+				__func__, b->name);
 		return 1;
 	}
 
@@ -348,13 +333,13 @@
 		res = b->resource[i];
 		if (!res->flags && i == 0) {
 			printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
-				__FUNCTION__, b->name);
+				__func__, b->name);
 			return 1;
 		}
 		if (res->flags && release_resource(res)) {
 			printk(KERN_ERR
 			       "%s: failed to release IO %d on bus %s\n",
-				__FUNCTION__, i, b->name);
+				__func__, i, b->name);
 			return 1;
 		}
 	}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 6adb5a1..db540ea 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -34,6 +34,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
@@ -56,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/lmb.h>
 #include <asm/xmon.h>
 #include <asm/cputhreads.h>
 
@@ -167,6 +167,8 @@
 	unsigned short min;
 
 	if (cpu_id == NR_CPUS) {
+		struct device_node *root;
+		const char *model = NULL;
 #if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
 		unsigned long bogosum = 0;
 		int i;
@@ -178,6 +180,13 @@
 		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
 		if (ppc_md.name)
 			seq_printf(m, "platform\t: %s\n", ppc_md.name);
+		root = of_find_node_by_path("/");
+		if (root)
+			model = of_get_property(root, "model", NULL);
+		if (model)
+			seq_printf(m, "model\t\t: %s\n", model);
+		of_node_put(root);
+
 		if (ppc_md.show_cpuinfo != NULL)
 			ppc_md.show_cpuinfo(m);
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index cd870a8..eac936e 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -172,6 +172,18 @@
 }
 __setup("l2cr=", ppc_setup_l2cr);
 
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L3CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l3cr set to %lx\n", val);
+		_set_L3CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
 #ifdef CONFIG_GENERIC_NVRAM
 
 /* Generic nvram hooks used by drivers/char/gen_nvram.c */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3b1529c..2c2d8315 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -33,6 +33,7 @@
 #include <linux/serial_8250.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -55,7 +56,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/lmb.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 4a4f5c6..9c3371e 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -368,11 +368,6 @@
 
 	error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
 
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 
 out:
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d3437c4..c21a626 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -21,13 +21,14 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f9886725..b77f8af 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -139,7 +139,7 @@
  */
 int vio_register_driver(struct vio_driver *viodrv)
 {
-	printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
+	printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
 		viodrv->driver.name);
 
 	/* fill in 'struct driver' fields */
@@ -184,7 +184,7 @@
 	/* we need the 'device_type' property, in order to match with drivers */
 	if (of_node->type == NULL) {
 		printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
-				__FUNCTION__,
+				__func__,
 				of_node->name ? of_node->name : "<unknown>");
 		return NULL;
 	}
@@ -192,7 +192,7 @@
 	unit_address = of_get_property(of_node, "reg", NULL);
 	if (unit_address == NULL) {
 		printk(KERN_WARNING "%s: node %s missing 'reg'\n",
-				__FUNCTION__,
+				__func__,
 				of_node->name ? of_node->name : "<unknown>");
 		return NULL;
 	}
@@ -227,7 +227,7 @@
 	/* register with generic device framework */
 	if (device_register(&viodev->dev)) {
 		printk(KERN_ERR "%s: failed to register device %s\n",
-				__FUNCTION__, viodev->dev.bus_id);
+				__func__, viodev->dev.bus_id);
 		/* XXX free TCE table */
 		kfree(viodev);
 		return NULL;
@@ -258,7 +258,7 @@
 	err = device_register(&vio_bus_device.dev);
 	if (err) {
 		printk(KERN_WARNING "%s: device_register returned %i\n",
-				__FUNCTION__, err);
+				__func__, err);
 		return err;
 	}
 
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index c4c622d..49eb1f1 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -75,6 +75,20 @@
 	beq	1b
 	blr
 
+_GLOBAL(strncmp)
+	PPC_LCMPI r5,0
+	beqlr
+	mtctr	r5
+	addi	r5,r3,-1
+	addi	r4,r4,-1
+1:	lbzu	r3,1(r5)
+	cmpwi	1,r3,0
+	lbzu	r0,1(r4)
+	subf.	r3,r0,r3
+	beqlr	1
+	bdnzt	eq,1b
+	blr
+
 _GLOBAL(strlen)
 	addi	r4,r3,-1
 1:	lbzu	r0,1(r4)
diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c
index 41f0617..549baba 100644
--- a/arch/powerpc/math-emu/fabs.c
+++ b/arch/powerpc/math-emu/fabs.c
@@ -9,7 +9,7 @@
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index fc88364..7befbbf 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -14,7 +14,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 93025b6..2b346b3 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -15,7 +15,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 4efac39..36d6890 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -15,7 +15,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index b7e3317..53d9389 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -14,7 +14,7 @@
 	long cmp;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index 3b3c98b..fcd7a95 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -16,7 +16,7 @@
 	frD[1] = r;
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 7717eb6..1514d59 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -23,7 +23,7 @@
 	__FPU_FPSCR = fpscr;
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index f2fba82..18a20fe 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -14,7 +14,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
@@ -28,13 +28,13 @@
 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
 		ret |= EFLAG_VXZDZ;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXZDZ raised\n", __func__);
 #endif
 	}
 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
 		ret |= EFLAG_VXIDI;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXIDI raised\n", __func__);
 #endif
 	}
 
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index b971196..24feed6 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -15,7 +15,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
@@ -29,13 +29,13 @@
 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
 		ret |= EFLAG_VXZDZ;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXZDZ raised\n", __func__);
 #endif
 	}
 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
 		ret |= EFLAG_VXIDI;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXIDI raised\n", __func__);
 #endif
 	}
 
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index 0a1dbce..dedb465 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -16,7 +16,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 0f70bba..6bbb56d 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -17,7 +17,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c
index 28df700..bd55384 100644
--- a/arch/powerpc/math-emu/fmr.c
+++ b/arch/powerpc/math-emu/fmr.c
@@ -9,7 +9,7 @@
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index 203fd48..f311e2c 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -16,7 +16,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 8ce6862..81a716d 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -17,7 +17,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 66c7e79..2f3d327 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -14,7 +14,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 26bc427..962b588 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -15,7 +15,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c
index c6b913d..a7d34f3 100644
--- a/arch/powerpc/math-emu/fnabs.c
+++ b/arch/powerpc/math-emu/fnabs.c
@@ -9,7 +9,7 @@
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c
index fe9a98d..1e988cd 100644
--- a/arch/powerpc/math-emu/fneg.c
+++ b/arch/powerpc/math-emu/fneg.c
@@ -9,7 +9,7 @@
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 7f31227..8cf7827 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -16,7 +16,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index 65454c9..f1c4f0f 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -17,7 +17,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index f1ca748..98944e6 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -16,7 +16,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index 5c9a09a..b20f4eb 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -17,7 +17,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c
index ec11e46..10ecbd0 100644
--- a/arch/powerpc/math-emu/fres.c
+++ b/arch/powerpc/math-emu/fres.c
@@ -6,7 +6,7 @@
 fres(void *frD, void *frB)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p\n", __func__, frD, frB);
 #endif
 	return -ENOSYS;
 }
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index d879b2a..724ccbc 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -12,7 +12,7 @@
 	FP_DECL_D(B);
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c
index a11ae18..1d0a3a0 100644
--- a/arch/powerpc/math-emu/frsqrte.c
+++ b/arch/powerpc/math-emu/frsqrte.c
@@ -6,7 +6,7 @@
 frsqrte(void *frD, void *frB)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p\n", __func__, frD, frB);
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index e36e6e7..ecb5f28 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -11,7 +11,7 @@
 	FP_DECL_D(A);
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 6f8319f..38ec2b7 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -13,7 +13,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 3b2b1cf..335263e 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -14,7 +14,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 9566790..208d20f 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -14,7 +14,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 3428117..0e61b80 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -15,7 +15,7 @@
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 7d38101..6ec90b5 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -11,7 +11,7 @@
 	if (copy_from_user(frD, ea, sizeof(double)))
 		return -EFAULT;
 #ifdef DEBUG
-	printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
+	printk("%s: D %p, ea %p: ", __func__, frD, ea);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index c86dee3..6f18ebe 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -14,7 +14,7 @@
 	float f;
 
 #ifdef DEBUG
-	printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
+	printk("%s: D %p, ea %p\n", __func__, frD, ea);
 #endif
 
 	if (copy_from_user(&f, ea, sizeof(float)))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 106dd91..41ba247 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -10,7 +10,7 @@
 	u32 value, clear;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
+	printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
 #endif
 
 	clear = 15 << ((7 - crfS) << 2);
@@ -24,7 +24,7 @@
 	*ccr |= (value << ((7 - crfD) << 2));
 
 #ifdef DEBUG
-	printk("CR: %08x\n", __FUNCTION__, *ccr);
+	printk("CR: %08x\n", __func__, *ccr);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index f477c91..b0e2106 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -10,7 +10,7 @@
 	frD[1] = __FPU_FPSCR;
 
 #ifdef DEBUG
-	printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
+	printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index 99bfd80..d306235 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -11,7 +11,7 @@
 		__FPU_FPSCR &= ~(1 << (31 - crbD));
 
 #ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 3d9e7ed..2e94870 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -11,7 +11,7 @@
 		__FPU_FPSCR |= (1 << (31 - crbD));
 
 #ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index d70cf71..48014d8 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -38,7 +38,7 @@
 	__FPU_FPSCR |= (frB[1] & mask);
 
 #ifdef DEBUG
-	printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
+	printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 71df854..031e200 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -16,7 +16,7 @@
 	__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
 
 #ifdef DEBUG
-	printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
+	printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c
index 3f8c255..33a165c 100644
--- a/arch/powerpc/math-emu/stfd.c
+++ b/arch/powerpc/math-emu/stfd.c
@@ -7,7 +7,7 @@
 {
 #if 0
 #ifdef DEBUG
-	printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
+	printk("%s: S %p, ea %p: ", __func__, frS, ea);
 	dump_double(frS);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c
index 95caaee..f15a35f 100644
--- a/arch/powerpc/math-emu/stfiwx.c
+++ b/arch/powerpc/math-emu/stfiwx.c
@@ -6,7 +6,7 @@
 stfiwx(u32 *frS, void *ea)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frS, ea);
+	printk("%s: %p %p\n", __func__, frS, ea);
 #endif
 
 	if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index e87ca23..8689aa4 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -15,7 +15,7 @@
 	int err;
 
 #ifdef DEBUG
-	printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
+	printk("%s: S %p, ea %p\n", __func__, frS, ea);
 #endif
 
 	__FP_UNPACK_D(A, frS);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 41649a5d..1c00e01 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif
 
-obj-y				:= fault.o mem.o lmb.o \
+obj-y				:= fault.o mem.o \
 				   init_$(CONFIG_WORD_SIZE).o \
 				   pgtable_$(CONFIG_WORD_SIZE).o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a83dfa3..2b5a399 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,6 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -41,7 +42,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
@@ -191,6 +192,29 @@
 	return ret < 0 ? ret : 0;
 }
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
+		      int psize, int ssize)
+{
+	unsigned long vaddr;
+	unsigned int step, shift;
+
+	shift = mmu_psize_defs[psize].shift;
+	step = 1 << shift;
+
+	if (!ppc_md.hpte_removebolted) {
+		printk(KERN_WARNING "Platform doesn't implement "
+				"hpte_removebolted\n");
+		return -EINVAL;
+	}
+
+	for (vaddr = vstart; vaddr < vend; vaddr += step)
+		ppc_md.hpte_removebolted(vaddr, psize, ssize);
+
+	return 0;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
 static int __init htab_dt_scan_seg_sizes(unsigned long node,
 					 const char *uname, int depth,
 					 void *data)
@@ -434,6 +458,12 @@
 			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
 			mmu_linear_psize, mmu_kernel_ssize));
 }
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+	return htab_remove_mapping(start, end, mmu_linear_psize,
+			mmu_kernel_ssize);
+}
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
 static inline void make_bl(unsigned int *insn_addr, void *func)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 977cb1e..0c66a9f 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,6 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -41,7 +42,6 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
-#include <asm/lmb.h>
 #include <asm/sections.h>
 
 #include "mmu_decl.h"
@@ -276,7 +276,7 @@
 
 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
 		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __FUNCTION__);
+			panic("%s: kmalloc failed\n", __func__);
 
 		/* must stay under 32 bits */
 		if ( 0xfffffffful - (unsigned long)__va(base) < size) {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c0f5cff..5f55399 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -38,11 +38,11 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
 #include <asm/prom.h>
-#include <asm/lmb.h>
 #include <asm/rtas.h>
 #include <asm/io.h>
 #include <asm/mmu_context.h>
@@ -122,7 +122,7 @@
 		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
 		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __FUNCTION__);
+			panic("%s: kmalloc failed\n", __func__);
 
 		kclist_add(kcore_mem, __va(base), size);
 	}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be5c506..e3349ea 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -31,6 +31,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -42,7 +43,6 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
-#include <asm/lmb.h>
 #include <asm/sections.h>
 #include <asm/vdso.h>
 
@@ -111,7 +111,7 @@
 }
 #endif
 
-int __devinit arch_add_memory(int nid, u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
 {
 	struct pglist_data *pgdata;
 	struct zone *zone;
@@ -175,7 +175,6 @@
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_pgdat(pgdat) {
 		unsigned long flags;
 		pgdat_resize_lock(pgdat, &flags);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a300d25..1efd631 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,8 +17,9 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
+#include <linux/lmb.h>
 #include <asm/sparsemem.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/system.h>
 #include <asm/smp.h>
 
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 5c45d47..72de3c7 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,11 +26,11 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
 
 #include "mmu_decl.h"
 
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 50448d5..efbbd13 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,12 +12,14 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/lmb.h>
+
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
 #include <asm/paca.h>
 #include <asm/cputable.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
 #include <asm/iseries/hv_call.h>
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 257b13c..2a9b4a0 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -68,7 +68,7 @@
 	if (spu_num >= num_spu_nodes) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Invalid index %d into spu info cache\n",
-		       __FUNCTION__, __LINE__, spu_num);
+		       __func__, __LINE__, spu_num);
 		ret_info = NULL;
 		goto out;
 	}
@@ -115,7 +115,7 @@
 	if (!info) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: create vma_map failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		retval = -ENOMEM;
 		goto err_alloc;
 	}
@@ -123,7 +123,7 @@
 	if (!new_map) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: create vma_map failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		retval = -ENOMEM;
 		goto err_alloc;
 	}
@@ -171,7 +171,7 @@
 			printk(KERN_ERR "SPU_PROF: "
 				"%s, line %d: "
 				"Invalid index %d into spu info cache\n",
-				__FUNCTION__, __LINE__, spu_index);
+				__func__, __LINE__, spu_index);
 			goto out;
 		}
 		end = spu_index + 1;
@@ -273,7 +273,7 @@
 
 	printk(KERN_ERR "SPU_PROF: "
 		"%s, line %d: Cannot find dcookie for SPU binary\n",
-		__FUNCTION__, __LINE__);
+		__func__, __LINE__);
 	goto out;
 }
 
@@ -467,7 +467,7 @@
 	if (ret) {
 		printk(KERN_ERR "SPU_PROF: "
 			"%s, line %d: spu_switch_event_unregister returned %d\n",
-			__FUNCTION__, __LINE__, ret);
+			__func__, __LINE__, ret);
 		goto out;
 	}
 
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 9a93217..fff6666 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -72,7 +72,7 @@
 		kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
 	if (!new) {
 		printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		vma_map_free(map);
 		return NULL;
 	}
@@ -134,19 +134,19 @@
 	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_ident parsing SPU ELF\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	if (ehdr.e_machine != EM_SPU) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_machine parsing SPU ELF\n",
-		       __FUNCTION__,  __LINE__);
+		       __func__,  __LINE__);
 		goto fail;
 	}
 	if (ehdr.e_type != ET_EXEC) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_type parsing SPU ELF\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	phdr_start = spu_elf_start + ehdr.e_phoff;
@@ -232,7 +232,7 @@
 	if (overlay_tbl_offset < 0) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Error finding SPU overlay table\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	ovly_table = spu_elf_start + overlay_tbl_offset;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 9eed1f6..5ff4de3 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -216,7 +216,7 @@
 		 * failure to stop OProfile.
 		 */
 		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 }
 
 static int pm_rtas_activate_signals(u32 node, u32 count)
@@ -255,7 +255,7 @@
 
 		if (unlikely(ret)) {
 			printk(KERN_WARNING "%s: rtas returned: %d\n",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			return -EIO;
 		}
 	}
@@ -560,7 +560,7 @@
 		if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
 			printk(KERN_ERR
 			       "%s: rtas token ibm,cbe-spu-perftools unknown\n",
-			       __FUNCTION__);
+			       __func__);
 			return -EIO;
 		}
 	}
@@ -576,7 +576,7 @@
 	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
 		printk(KERN_ERR
 		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EIO;
 	}
 
@@ -853,7 +853,7 @@
 
 	if (unlikely(ret)) {
 		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 		return -EIO;
 	}
 
@@ -949,7 +949,7 @@
 		if (unlikely(ret != 0)) {
 			printk(KERN_ERR
 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			rtas_error = -EIO;
 			goto out;
 		}
@@ -1061,7 +1061,7 @@
 		if (unlikely(rtn_value != 0)) {
 			printk(KERN_ERR
 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
-			       __FUNCTION__, rtn_value);
+			       __func__, rtn_value);
 		}
 
 		/* Deactivate the signals */
diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c
index 13d1345..ae2e7f6 100644
--- a/arch/powerpc/platforms/40x/ep405.c
+++ b/arch/powerpc/platforms/40x/ep405.c
@@ -29,6 +29,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static struct device_node *bcsr_node;
 static void __iomem *bcsr_regs;
@@ -119,5 +120,6 @@
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
index f9206a7f..1dd24ff 100644
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ b/arch/powerpc/platforms/40x/kilauea.c
@@ -1,7 +1,7 @@
 /*
  * Kilauea board specific routines
  *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * Based on the Walnut code by
  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
@@ -20,6 +20,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id kilauea_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
index 4e4df72..a6a1d60 100644
--- a/arch/powerpc/platforms/40x/makalu.c
+++ b/arch/powerpc/platforms/40x/makalu.c
@@ -20,6 +20,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id makalu_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 0422590..fc7fb00 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/ppc4xx.h>
 
 static struct of_device_id xilinx_of_bus_ids[] __initdata = {
 	{ .compatible = "xlnx,plb-v46-1.00.a", },
@@ -48,5 +49,6 @@
 	.probe			= virtex_probe,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c
index b8b257e..335df91 100644
--- a/arch/powerpc/platforms/40x/walnut.c
+++ b/arch/powerpc/platforms/40x/walnut.c
@@ -26,6 +26,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id walnut_of_bus[] = {
 	{ .compatible = "ibm,plb3", },
@@ -61,5 +62,6 @@
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.calibrate_decr	= generic_calibrate_decr,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index 42eabf8..dbc4d2b 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -3,6 +3,5 @@
 
 extern u8 as1_readb(volatile u8 __iomem  *addr);
 extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
-extern void ppc44x_reset_system(char *cmd);
 
 #endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 1bfb219..6abe913 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -67,6 +67,25 @@
 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
 	  Telephony Developers" link for more information.
 
+config CANYONLANDS
+	bool "Canyonlands"
+	depends on 44x
+	default n
+	select 460EX
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC460EX evaluation board.
+
+config YOSEMITE
+	bool "Yosemite"
+	depends on 44x
+	default n
+	select 440EP
+	select PCI
+	help
+	  This option enables support for the AMCC PPC440EP evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
@@ -122,6 +141,14 @@
 	bool
 	select IBM_NEW_EMAC_EMAC4
 
+config 460EX
+	bool
+	select PPC_FPU
+	select IBM_NEW_EMAC_EMAC4
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+	select IBM_NEW_EMAC_TAH
+
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 0864d4f..2320ae5 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -2,8 +2,10 @@
 obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_TAISHAN)	+= taishan.o
 obj-$(CONFIG_BAMBOO)	+= bamboo.o
+obj-$(CONFIG_YOSEMITE)	+= bamboo.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
 obj-$(CONFIG_KATMAI)	+= katmai.o
 obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
+obj-$(CONFIG_CANYONLANDS) += canyonlands.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
index fb9a22a..cef169e 100644
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ b/arch/powerpc/platforms/44x/bamboo.c
@@ -22,8 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id bamboo_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -53,11 +52,11 @@
 }
 
 define_machine(bamboo) {
-	.name 				= "Bamboo",
-	.probe 				= bamboo_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.name 			= "Bamboo",
+	.probe 			= bamboo_probe,
+	.progress 		= udbg_progress,
+	.init_IRQ 		= uic_init_tree,
+	.get_irq 		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr 	= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 0000000..3949289
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,63 @@
+/*
+ * Canyonlands board specific routines
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Katmai code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id canyonlands_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init canyonlands_device_probe(void)
+{
+	of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(canyonlands, canyonlands_device_probe);
+
+static int __init canyonlands_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
+		return 0;
+
+	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+	return 1;
+}
+
+define_machine(canyonlands) {
+	.name 				= "Canyonlands",
+	.probe 				= canyonlands_probe,
+	.progress 			= udbg_progress,
+	.init_IRQ 			= uic_init_tree,
+	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
+	.calibrate_decr			= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c
index 1a8d467..a0e8fe4 100644
--- a/arch/powerpc/platforms/44x/ebony.c
+++ b/arch/powerpc/platforms/44x/ebony.c
@@ -26,8 +26,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id ebony_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -66,6 +65,6 @@
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.restart		= ppc44x_reset_system,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
index 1113412..44f4b3a 100644
--- a/arch/powerpc/platforms/44x/katmai.c
+++ b/arch/powerpc/platforms/44x/katmai.c
@@ -22,8 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id katmai_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -58,6 +57,6 @@
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S
index 3bce71d..dc12b80 100644
--- a/arch/powerpc/platforms/44x/misc_44x.S
+++ b/arch/powerpc/platforms/44x/misc_44x.S
@@ -44,14 +44,3 @@
 	sync
 	isync
 	blr
-
-/*
- * void ppc44x_reset_system(char *cmd)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(ppc44x_reset_system)
-	mfspr	r13,SPRN_DBCR0
-	oris	r13,r13,DBCR0_RST_SYSTEM@h
-	mtspr	SPRN_DBCR0,r13
-	b	.			/* Just in case the reset doesn't work */
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
index a7fae1c..4f1ff84 100644
--- a/arch/powerpc/platforms/44x/rainier.c
+++ b/arch/powerpc/platforms/44x/rainier.c
@@ -22,7 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id rainier_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -57,6 +57,6 @@
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
index d279db4..49eb73d 100644
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ b/arch/powerpc/platforms/44x/sequoia.c
@@ -23,7 +23,7 @@
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
 
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id sequoia_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -58,6 +58,6 @@
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
index 28ab7e2..49c78b2 100644
--- a/arch/powerpc/platforms/44x/taishan.c
+++ b/arch/powerpc/platforms/44x/taishan.c
@@ -29,8 +29,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id taishan_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -68,6 +67,6 @@
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.restart		= ppc44x_reset_system,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 84ab78f..9150318 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,6 +11,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/ndfc.h>
+#include <asm/machdep.h>
 
 #ifdef CONFIG_MTD_NAND_NDFC
 
@@ -100,6 +101,6 @@
 
 	return 0;
 }
-device_initcall(warp_setup_nand_flash);
+machine_device_initcall(warp, warp_setup_nand_flash);
 
 #endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index da5b7b7..39cf615 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -18,9 +18,7 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-
-#include "44x.h"
-
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id warp_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -49,7 +47,7 @@
 	.progress 	= udbg_progress,
 	.init_IRQ 	= uic_init_tree,
 	.get_irq 	= uic_get_irq,
-	.restart	= ppc44x_reset_system,
+	.restart	= ppc4xx_reset_system,
 	.calibrate_decr = generic_calibrate_decr,
 };
 
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 956f459..6d584f4 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -63,7 +63,7 @@
 	of_node_put(np);
 	if (!cdm) {
 		printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
@@ -98,7 +98,7 @@
 	of_node_put(np);
 	if (!gpio) {
 		printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7e76ddb..28bc6e5 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -46,6 +46,13 @@
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
+config KSI8560
+        bool "Emerson KSI8560"
+        select PPC_CPM_NEW_BINDING
+        select DEFAULT_UIMAGE
+        help
+          This option enables support for the Emerson KSI8560 board
+
 config STX_GP3
 	bool "Silicon Turnkey Express GP3"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index cb7af4e..6cea185 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,3 +10,4 @@
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
+obj-$(CONFIG_KSI8560)	  += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
new file mode 100644
index 0000000..2145ade
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -0,0 +1,257 @@
+/*
+ * Board setup routines for the Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc85xx_ads.c maintained by Kumar Gala
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+
+
+#define KSI8560_CPLD_HVR		0x04 /* Hardware Version Register */
+#define KSI8560_CPLD_PVR		0x08 /* PLD Version Register */
+#define KSI8560_CPLD_RCR1		0x30 /* Reset Command Register 1 */
+
+#define KSI8560_CPLD_RCR1_CPUHR		0x80 /* CPU Hard Reset */
+
+static void __iomem *cpld_base = NULL;
+
+static void machine_restart(char *cmd)
+{
+	if (cpld_base)
+		out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
+	else
+		printk(KERN_ERR "Can't find CPLD base, hang forever\n");
+
+	for (;;);
+}
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq()) >= 0)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static void __init ksi8560_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+#ifdef CONFIG_CPM2
+	int irq;
+#endif
+
+	np = of_find_node_by_type(NULL, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Could not map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+	/* Setup CPM2 PIC */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+	set_irq_chained_handler(irq, cpm2_cascade);
+
+	setup_irq(0, NULL);
+#endif
+}
+
+#ifdef CONFIG_CPM2
+/*
+ * Setup I/O ports
+ */
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin __initdata ksi8560_pins[] = {
+	/* SCC1 */
+	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC2 */
+	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
+
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
+		struct cpm_pin *pin = &ksi8560_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init ksi8560_setup_arch(void)
+{
+	struct device_node *cpld;
+
+	cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
+	if (cpld)
+		cpld_base = of_iomap(cpld, 0);
+	else
+		printk(KERN_ERR "Can't find CPLD in device tree\n");
+
+	if (ppc_md.progress)
+		ppc_md.progress("ksi8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+	cpm2_reset();
+	init_ioports();
+#endif
+}
+
+static void ksi8560_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+	uint memsize = total_memory;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
+	seq_printf(m, "Board\t\t: KSI8560\n");
+
+	if (cpld_base) {
+		seq_printf(m, "Hardware rev\t: %d\n",
+					in_8(cpld_base + KSI8560_CPLD_HVR));
+		seq_printf(m, "CPLD rev\t: %d\n",
+					in_8(cpld_base + KSI8560_CPLD_PVR));
+	} else
+		seq_printf(m, "Unknown Hardware and CPLD revs\n");
+
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(ksi8560, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ksi8560_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "emerson,KSI8560");
+}
+
+define_machine(ksi8560) {
+	.name			= "KSI8560",
+	.probe			= ksi8560_probe,
+	.setup_arch		= ksi8560_setup_arch,
+	.init_IRQ		= ksi8560_pic_init,
+	.show_cpuinfo		= ksi8560_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= machine_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index bdb3d0b..2865d01 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -36,7 +36,7 @@
 #undef DEBUG
 
 #ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define DBG(fmt, args...)
 #endif
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 184f998..0d9f75c 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -111,17 +111,12 @@
 
 	/* Processor frequency is MHz.
 	 */
-	ppc_tb_freq = 50000000;
-	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
-		                "(not found)\n");
-	}
-	ppc_tb_freq /= 16;
 	ppc_proc_freq = 50000000;
 	if (!get_freq("clock-frequency", &ppc_proc_freq))
 		printk(KERN_ERR "WARNING: Estimating processor frequency "
 		                "(not found)\n");
 
+	ppc_tb_freq = ppc_proc_freq / 16;
 	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
 
 	/* Perform some more timer/timebase initialization.  This used
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 0c3face..5fc7fac 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -41,11 +41,13 @@
 	bool "AMCC 40x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
+	select 4xx_SOC
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
+	select 4xx_SOC
 
 config E200
 	bool "Freescale e200"
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index d75ccde..45646b2 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -28,13 +28,13 @@
 #include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/udbg.h>
-#include <asm/lmb.h>
 #include <asm/firmware.h>
 #include <asm/cell-regs.h>
 
@@ -316,7 +316,7 @@
 	segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
 
 	pr_debug("%s: iommu[%d]: segments: %lu\n",
-			__FUNCTION__, iommu->nid, segments);
+			__func__, iommu->nid, segments);
 
 	/* set up the segment table */
 	stab_size = segments * sizeof(unsigned long);
@@ -343,7 +343,7 @@
 				(1 << 12) / sizeof(unsigned long));
 
 	ptab_size = segments * pages_per_segment * sizeof(unsigned long);
-	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
+	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
 			iommu->nid, ptab_size, get_order(ptab_size));
 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
 	BUG_ON(!page);
@@ -355,7 +355,7 @@
 	n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
 
 	pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
-			__FUNCTION__, iommu->nid, iommu->stab, ptab,
+			__func__, iommu->nid, iommu->stab, ptab,
 			n_pte_pages);
 
 	/* initialise the STEs */
@@ -394,7 +394,7 @@
 
 	if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
 		panic("%s: missing IOC register mappings for node %d\n",
-		      __FUNCTION__, iommu->nid);
+		      __func__, iommu->nid);
 
 	iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
 	iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 0304589..8a3631c 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -65,7 +65,7 @@
 		break;
 	default:
 		printk(KERN_WARNING "%s: unknown configuration\n",
-			__FUNCTION__);
+			__func__);
 		break;
 	}
 	mtspr(SPRN_TSC_CELL, thread_switch_control);
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index e43024c..655704a 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -132,7 +132,7 @@
 				(unsigned int)(addr >> 32),
 				(unsigned int)(addr & 0xffffffff))) {
 		printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
-				__FUNCTION__, nid);
+				__func__, nid);
 		goto out_free_pages;
 	}
 
@@ -162,7 +162,7 @@
 	if (!size)
 		return -ENODEV;
 
-	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
 	order = get_order(*size);
 	of_node_put(np);
 
@@ -180,7 +180,7 @@
 		const u32 *nid = of_get_property(np, "node-id", NULL);
 		if (!nid) {
 			printk(KERN_ERR "%s: node %s is missing node-id?\n",
-					__FUNCTION__, np->full_name);
+					__func__, np->full_name);
 			continue;
 		}
 		cbe_ptcal_enable_on_node(*nid, order);
@@ -195,13 +195,13 @@
 	struct ptcal_area *area, *tmp;
 	int ret = 0;
 
-	pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+	pr_debug("%s: disabling PTCAL\n", __func__);
 
 	list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
 		/* disable ptcal on this node */
 		if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
 			printk(KERN_ERR "%s: error disabling PTCAL "
-					"on node %d!\n", __FUNCTION__,
+					"on node %d!\n", __func__,
 					area->nid);
 			ret = -EIO;
 			continue;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 712001f..6bab44b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -165,7 +165,7 @@
 	struct spu_slb slb;
 	int psize;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
 
@@ -215,7 +215,7 @@
 extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
 static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 {
-	pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
+	pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
 
 	/* Handle kernel space hash faults immediately.
 	   User hash faults need to be deferred to process context. */
@@ -351,7 +351,7 @@
 		__spu_trap_data_seg(spu, dar);
 
 	spin_unlock(&spu->register_lock);
-	pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+	pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
 			dar, dsisr);
 
 	if (stat & CLASS1_STORAGE_FAULT_INTR)
@@ -726,7 +726,7 @@
 
 	if (ret < 0) {
 		printk(KERN_WARNING "%s: Error initializing spus\n",
-			__FUNCTION__);
+			__func__);
 		goto out_unregister_sysdev_class;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index dceb8b6..19f6bfd 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
-		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+		pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
 		return -ENOSYS;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index d351bde..4c506c1 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -92,7 +92,7 @@
 
 	tmp = of_get_property(np->parent->parent, "node-id", NULL);
 	if (!tmp) {
-		printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+		printk(KERN_WARNING "%s: can't find node-id\n", __func__);
 		nid = spu->node;
 	} else
 		nid = tmp[0];
@@ -296,7 +296,7 @@
 		ret = fn(node);
 		if (ret) {
 			printk(KERN_WARNING "%s: Error initializing %s\n",
-				__FUNCTION__, node->name);
+				__func__, node->name);
 			break;
 		}
 		n++;
@@ -327,7 +327,7 @@
 		if (!legacy_map) {
 			legacy_map = 1;
 			printk(KERN_WARNING "%s: Legacy device tree found, "
-				"trying to map old style\n", __FUNCTION__);
+				"trying to map old style\n", __func__);
 		}
 		ret = spu_map_device_old(spu);
 		if (ret) {
@@ -342,7 +342,7 @@
 		if (!legacy_irq) {
 			legacy_irq = 1;
 			printk(KERN_WARNING "%s: Legacy device tree found, "
-				"trying old style irq\n", __FUNCTION__);
+				"trying old style irq\n", __func__);
 		}
 		ret = spu_map_interrupts_old(spu, spe);
 		if (ret) {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index f7a7e86..f14d3a0 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1556,7 +1556,7 @@
 
 	wake_up_all(&ctx->mfc_wq);
 
-	pr_debug("%s %s\n", __FUNCTION__, spu->name);
+	pr_debug("%s %s\n", __func__, spu->name);
 	if (ctx->mfc_fasync) {
 		u32 free_elements, tagstatus;
 		unsigned int mask;
@@ -1790,7 +1790,7 @@
 	if (tagstatus & ctx->tagwait)
 		mask |= POLLIN | POLLRDNORM;
 
-	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
 		free_elements, tagstatus, ctx->tagwait);
 
 	return mask;
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index cac69e1..5986d08 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -98,7 +98,7 @@
 			!= MFC_CNTL_PURGE_DMA_COMPLETE) {
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
-					__FUNCTION__);
+					__func__);
 			ret = -EIO;
 			goto out;
 		}
@@ -124,7 +124,7 @@
 				status_loading) {
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "%s: timeout waiting for loader\n",
-					__FUNCTION__);
+					__func__);
 			ret = -EIO;
 			goto out_drop_priv;
 		}
@@ -134,7 +134,7 @@
 	if (!(status & SPU_STATUS_RUNNING)) {
 		/* If isolated LOAD has failed: run SPU, we will get a stop-and
 		 * signal later. */
-		pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
+		pr_debug("%s: isolated LOAD failed\n", __func__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
 		ret = -EACCES;
 		goto out_drop_priv;
@@ -142,7 +142,7 @@
 
 	if (!(status & SPU_STATUS_ISOLATED_STATE)) {
 		/* This isn't allowed by the CBEA, but check anyway */
-		pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
+		pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
 		ret = -EINVAL;
 		goto out_drop_priv;
@@ -282,7 +282,7 @@
 		break;
 	default:
 		printk(KERN_WARNING "%s: unexpected return code %ld\n",
-			__FUNCTION__, *spu_ret);
+			__func__, *spu_ret);
 		ret = 0;
 	}
 	return ret;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d4f8bf5..84e2d78 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -117,11 +117,11 @@
 	}
 
 	if (mpic_paddr == 0) {
-		printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+		printk("%s: No tsi108 PIC found !\n", __func__);
 		return;
 	}
 
-	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
+	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
 	    (u32) mpic_paddr);
 
 	mpic = mpic_alloc(tsi_pic, mpic_paddr,
@@ -140,17 +140,17 @@
 #ifdef CONFIG_PCI
 	tsi_pci = of_find_node_by_type(NULL, "pci");
 	if (tsi_pci == NULL) {
-		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+		printk("%s: No tsi108 pci node found !\n", __func__);
 		return;
 	}
 	cascade_node = of_find_node_by_type(NULL, "pic-router");
 	if (cascade_node == NULL) {
-		printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+		printk("%s: No tsi108 pci cascade node found !\n", __func__);
 		return;
 	}
 
 	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
-	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
 	    (u32) cascade_pci_irq);
 	tsi108_pci_int_init(cascade_node);
 	set_irq_data(cascade_pci_irq, mpic);
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index cc562e4..02a634f 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -23,6 +23,7 @@
 
 #undef DEBUG
 
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
@@ -586,7 +587,7 @@
 		static unsigned long last_jiffies;
 		static int num_printed;
 
-		if ((jiffies - last_jiffies) > 60 * HZ) {
+		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
 			last_jiffies = jiffies;
 			num_printed = 0;
 		}
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3ffa0ac..3018552 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,50 +592,3 @@
 	}
 	return irq;
 }
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
-	if (!machine_is(maple))
-		return;
-
-#if 0 /* Enable this to enable IDE port 0 */
-	{
-		u8 v;
-
-		pci_read_config_byte(dev, 0x40, &v);
-		v |= 2;
-		pci_write_config_byte(dev, 0x40, v);
-	}
-#endif
-#if 0 /* fix bus master base */
-	pci_write_config_dword(dev, 0x20, 0xcc01);
-	printk("old ide resource: %lx -> %lx \n",
-	       dev->resource[4].start, dev->resource[4].end);
-	dev->resource[4].start = 0xcc00;
-	dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
-	{
-		struct pci_dev *apicdev;
-		u32 v;
-
-		apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
-		if (apicdev == NULL)
-			printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
-		else {
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_dev_put(apicdev);
-		}
-	}
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
-			 fixup_maple_ide);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3ce2d73..3647147 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
@@ -57,7 +58,6 @@
 #include <asm/dma.h>
 #include <asm/cputable.h>
 #include <asm/time.h>
-#include <asm/lmb.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
 #include <asm/udbg.h>
@@ -319,7 +319,7 @@
 	return 1;
 }
 
-define_machine(maple_md) {
+define_machine(maple) {
 	.name			= "Maple",
 	.probe			= maple_probe,
 	.setup_arch		= maple_setup_arch,
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index c529d8d..217af32 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -17,6 +17,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -26,6 +27,8 @@
 
 #define MAX_TXCH 64
 #define MAX_RXCH 64
+#define MAX_FLAGS 64
+#define MAX_FUN 8
 
 static struct pasdma_status *dma_status;
 
@@ -43,6 +46,8 @@
 
 static DECLARE_BITMAP(txch_free, MAX_TXCH);
 static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
 
 /* pasemi_read_iob_reg - read IOB register
  * @reg: Register to read (offset into PCI CFG space)
@@ -373,6 +378,106 @@
 }
 EXPORT_SYMBOL(pasemi_dma_free_buf);
 
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, flags_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+	BUG_ON(test_bit(flag, flags_free));
+	BUG_ON(flag >= MAX_FLAGS);
+	set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, fun_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+	BUG_ON(test_bit(fun, fun_free));
+	BUG_ON(fun >= MAX_FLAGS);
+	set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
 static void *map_onedev(struct pci_dev *p, int index)
 {
 	struct device_node *dn;
@@ -410,6 +515,7 @@
 	struct resource res;
 	struct device_node *dn;
 	int i, intf, err = 0;
+	unsigned long timeout;
 	u32 tmp;
 
 	if (!machine_is(pasemi))
@@ -478,6 +584,44 @@
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable RX section\n");
+			break;
+		}
+	}
+
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable TX section\n");
+			break;
+		}
+	}
+
+	/* setup resource allocations for the different DMA sections */
+	tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+	pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+	/* enable tx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+	/* enable rx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
+	for (i = 0; i < MAX_FLAGS; i++)
+		__set_bit(i, flags_free);
+
+	for (i = 0; i < MAX_FUN; i++)
+		__set_bit(i, fun_free);
+
+	/* clear all status flags */
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
 	printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
 		"(%d tx, %d rx channels)\n", num_txch, num_rxch);
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 36ff1b6..59404ba 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -53,6 +53,7 @@
 #include <linux/suspend.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -74,7 +75,6 @@
 #include <asm/iommu.h>
 #include <asm/smu.h>
 #include <asm/pmc.h>
-#include <asm/lmb.h>
 #include <asm/udbg.h>
 
 #include "pmac.h"
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 9d251d0..3866deb 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -499,41 +499,14 @@
 }
 
 /**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
  */
 
-static int ps3_register_repository_device(
-	const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
 {
 	int result;
 
 	switch (repo->dev_type) {
-	case PS3_DEV_TYPE_SB_GELIC:
-		result = ps3_setup_gelic_device(repo);
-		if (result) {
-			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
-				__func__, __LINE__);
-		}
-		break;
-	case PS3_DEV_TYPE_SB_USB:
-
-		/* Each USB device has both an EHCI and an OHCI HC */
-
-		result = ps3_setup_ehci_device(repo);
-
-		if (result) {
-			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
-				__func__, __LINE__);
-		}
-
-		result = ps3_setup_ohci_device(repo);
-
-		if (result) {
-			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
-				__func__, __LINE__);
-		}
-		break;
 	case PS3_DEV_TYPE_STOR_DISK:
 		result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
 
@@ -572,6 +545,48 @@
 	return result;
 }
 
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+	int result;
+
+	switch (repo->dev_type) {
+	case PS3_DEV_TYPE_SB_GELIC:
+		result = ps3_setup_gelic_device(repo);
+		if (result) {
+			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+				__func__, __LINE__);
+		}
+		break;
+	case PS3_DEV_TYPE_SB_USB:
+
+		/* Each USB device has both an EHCI and an OHCI HC */
+
+		result = ps3_setup_ehci_device(repo);
+
+		if (result) {
+			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+				__func__, __LINE__);
+		}
+
+		result = ps3_setup_ohci_device(repo);
+
+		if (result) {
+			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+				__func__, __LINE__);
+		}
+		break;
+
+	default:
+		return ps3_setup_dynamic_device(repo);
+	}
+
+	return result;
+}
+
 static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
 {
 	struct ps3_repository_device repo;
@@ -601,7 +616,7 @@
 		pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
 			 __func__, __LINE__, bus_id, dev_id, retries);
 
-	ps3_register_repository_device(&repo);
+	ps3_setup_dynamic_device(&repo);
 	return;
 }
 
@@ -905,8 +920,7 @@
 
 	ps3_register_graphics_devices();
 
-	ps3_repository_find_devices(PS3_BUS_TYPE_SB,
-		ps3_register_repository_device);
+	ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
 
 	ps3_register_sound_devices();
 
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 7382f19..1cf901f 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,9 +19,10 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/lmb.h>
 
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/ps3fb.h>
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 3a6db04..a14e5cd 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -709,7 +709,7 @@
 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
 	plug &= 0x3f;
 
-	if (unlikely(plug) == NO_IRQ) {
+	if (unlikely(plug == NO_IRQ)) {
 		pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 6890047..5b3fb2b 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,9 +21,10 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
+#include <linux/lmb.h>
 
 #include <asm/firmware.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index b9ea09d..c73379e 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,8 +24,9 @@
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
+#include <linux/lmb.h>
 
-#include <asm/lmb.h>
+#include <asm/prom.h>
 
 #include "platform.h"
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 5c2cbb0..a413abb 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -95,6 +95,14 @@
 	ps3_sys_manager_power_off(); /* never returns */
 }
 
+static void ps3_halt(void)
+{
+	DBG("%s:%d\n", __func__, __LINE__);
+
+	smp_send_stop();
+	ps3_sys_manager_halt(); /* never returns */
+}
+
 static void ps3_panic(char *str)
 {
 	DBG("%s:%d %s\n", __func__, __LINE__, str);
@@ -105,7 +113,8 @@
 	printk("   Please press POWER button.\n");
 	printk("\n");
 
-	while(1);
+	while(1)
+		lv1_pause(1);
 }
 
 #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
@@ -117,7 +126,7 @@
 
 	p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
 	if (!p->address) {
-		printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
 		       p->name);
 		return;
 	}
@@ -266,6 +275,7 @@
 	.progress			= ps3_progress,
 	.restart			= ps3_restart,
 	.power_off			= ps3_power_off,
+	.halt				= ps3_halt,
 #if defined(CONFIG_KEXEC)
 	.kexec_cpu_down			= ps3_kexec_cpu_down,
 	.machine_kexec			= default_machine_kexec,
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 5ad4118..d135cef 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -27,6 +27,7 @@
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
 #include <asm/lv1call.h>
+#include <asm/ps3.h>
 
 #include "../cell/spufs/spufs.h"
 #include "platform.h"
@@ -140,6 +141,12 @@
 	pr_debug("%s:%d: shadow:  %lxh\n", func, line, shadow);
 }
 
+inline u64 ps3_get_spe_id(void *arg)
+{
+	return spu_pdata(arg)->spe_id;
+}
+EXPORT_SYMBOL_GPL(ps3_get_spe_id);
+
 static unsigned long get_vas_id(void)
 {
 	unsigned long id;
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 992ba67..bdae04b 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -18,3 +18,4 @@
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9eb539e..550b2f7d 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -945,7 +945,6 @@
 	unsigned int rets[3];
 	struct eeh_early_enable_info *info = data;
 	int ret;
-	const char *status = of_get_property(dn, "status", NULL);
 	const u32 *class_code = of_get_property(dn, "class-code", NULL);
 	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
 	const u32 *device_id = of_get_property(dn, "device-id", NULL);
@@ -959,8 +958,8 @@
 	pdn->eeh_freeze_count = 0;
 	pdn->eeh_false_positives = 0;
 
-	if (status && strncmp(status, "ok", 2) != 0)
-		return NULL;	/* ignore devices with bad status */
+	if (!of_device_is_available(dn))
+		return NULL;
 
 	/* Ignore bad nodes. */
 	if (!class_code || !vendor_id || !device_id)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 9a455d4..233d9be 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -520,6 +520,20 @@
 	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
+static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+					   int psize, int ssize)
+{
+	unsigned long slot, vsid, va;
+
+	vsid = get_kernel_vsid(ea, ssize);
+	va = hpt_va(ea, vsid, ssize);
+
+	slot = pSeries_lpar_hpte_find(va, psize, ssize);
+	BUG_ON(slot == -1);
+
+	pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+}
+
 /* Flag bits for H_BULK_REMOVE */
 #define HBR_REQUEST	0x4000000000000000UL
 #define HBR_RESPONSE	0x8000000000000000UL
@@ -597,6 +611,7 @@
 	ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
 	ppc_md.hpte_insert	= pSeries_lpar_hpte_insert;
 	ppc_md.hpte_remove	= pSeries_lpar_hpte_remove;
+	ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
 	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;
 	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;
 }
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5a5a19e..0d7229c 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -123,7 +123,7 @@
 	/* Add to children of PCI bridge dev->bus */
 	child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
 	if (!child_bus) {
-		printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+		printk (KERN_ERR "%s: could not add second bus\n", __func__);
 		return -EIO;
 	}
 	sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
new file mode 100644
index 0000000..7ddd105
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -0,0 +1,498 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/sysfs.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/* Variables, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_vars;
+struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
+
+static int ibm_configure_kernel_dump;
+/* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+	u32 dump_flags;
+	u16 source_type;
+	u16 error_flags;
+	u64 source_address;
+	u64 source_length;
+	u64 length_copied;
+	u64 destination_address;
+};
+
+struct phyp_dump_header {
+	u32 version;
+	u16 num_of_sections;
+	u16 status;
+
+	u32 first_offset_section;
+	u32 dump_disk_section;
+	u64 block_num_dd;
+	u64 num_of_blocks_dd;
+	u32 offset_dd;
+	u32 maxtime_to_auto;
+	/* No dump disk path string used */
+
+	struct dump_section cpu_data;
+	struct dump_section hpte_data;
+	struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS	3
+#define DUMP_HEADER_VERSION	0x1
+#define DUMP_REQUEST_FLAG	0x1
+#define DUMP_SOURCE_CPU		0x0001
+#define DUMP_SOURCE_HPTE	0x0002
+#define DUMP_SOURCE_RMO		0x0011
+#define DUMP_ERROR_FLAG		0x2000
+#define DUMP_TRIGGERED		0x4000
+#define DUMP_PERFORMED		0x8000
+
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+	unsigned long addr_offset = 0;
+
+	/* Set up the dump header */
+	ph->version = DUMP_HEADER_VERSION;
+	ph->num_of_sections = NUM_DUMP_SECTIONS;
+	ph->status = 0;
+
+	ph->first_offset_section =
+		(u32)offsetof(struct phyp_dump_header, cpu_data);
+	ph->dump_disk_section = 0;
+	ph->block_num_dd = 0;
+	ph->num_of_blocks_dd = 0;
+	ph->offset_dd = 0;
+
+	ph->maxtime_to_auto = 0; /* disabled */
+
+	/* The first two sections are mandatory */
+	ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+	ph->cpu_data.source_address = 0;
+	ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+	ph->cpu_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->cpu_state_size;
+
+	ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+	ph->hpte_data.source_address = 0;
+	ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+	ph->hpte_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->hpte_region_size;
+
+	/* This section describes the low kernel region */
+	ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+	ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+	ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+	ph->kernel_data.destination_address = addr_offset;
+	addr_offset += ph->kernel_data.source_length;
+
+	return addr_offset;
+}
+
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+	printk(KERN_INFO "dump header:\n");
+	/* setup some ph->sections required */
+	printk(KERN_INFO "version = %d\n", ph->version);
+	printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+	printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+	/* No ph->disk, so all should be set to 0 */
+	printk(KERN_INFO "Offset to first section 0x%x\n",
+		ph->first_offset_section);
+	printk(KERN_INFO "dump disk sections should be zero\n");
+	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+	/*set cpu state and hpte states as well scratch pad area */
+	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+	printk(KERN_INFO "cpu source_address =%lx\n",
+		ph->cpu_data.source_address);
+	printk(KERN_INFO "cpu source_length =%lx\n",
+		ph->cpu_data.source_length);
+	printk(KERN_INFO "cpu length_copied =%lx\n",
+		ph->cpu_data.length_copied);
+
+	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+	printk(KERN_INFO "HPTE source_address =%lx\n",
+		ph->hpte_data.source_address);
+	printk(KERN_INFO "HPTE source_length =%lx\n",
+		ph->hpte_data.source_length);
+	printk(KERN_INFO "HPTE length_copied =%lx\n",
+		ph->hpte_data.length_copied);
+
+	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+	printk(KERN_INFO "SRSD source_address =%lx\n",
+		ph->kernel_data.source_address);
+	printk(KERN_INFO "SRSD source_length =%lx\n",
+		ph->kernel_data.source_length);
+	printk(KERN_INFO "SRSD length_copied =%lx\n",
+		ph->kernel_data.length_copied);
+#endif
+}
+
+static ssize_t show_phyp_dump_active(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+
+	/* create filesystem entry so kdump is phyp-dump aware */
+	return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
+}
+
+static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
+					show_phyp_dump_active,
+					NULL);
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	/* ToDo Invalidate kdump and free memory range. */
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+				1, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc) {
+		printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
+						"register\n", rc);
+		print_dump_header(ph);
+		return;
+	}
+
+	rc = sysfs_create_file(kernel_kobj, &pdl.attr);
+	if (rc)
+		printk(KERN_ERR "phyp-dump: unable to create sysfs"
+				" file (%d)\n", rc);
+}
+
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+				2, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc) {
+		printk(KERN_ERR "phyp-dump: unexpected error (%d) "
+						"on invalidate\n", rc);
+		print_dump_header(ph);
+	}
+}
+
+/* ------------------------------------------------- */
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void release_memory_range(unsigned long start_pfn,
+			unsigned long nr_pages)
+{
+	struct page *rpage;
+	unsigned long end_pfn;
+	long i;
+
+	end_pfn = start_pfn + nr_pages;
+
+	for (i = start_pfn; i <= end_pfn; i++) {
+		rpage = pfn_to_page(i);
+		if (PageReserved(rpage)) {
+			ClearPageReserved(rpage);
+			init_page_count(rpage);
+			__free_page(rpage);
+			totalram_pages++;
+		}
+	}
+}
+
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+	static unsigned long scratch_area_size, reserved_area_size;
+
+	if (addr < phyp_dump_info->init_reserve_start)
+		return;
+
+	if ((addr >= phyp_dump_info->init_reserve_start) &&
+	    (addr <= phyp_dump_info->init_reserve_start +
+	     phyp_dump_info->init_reserve_size))
+		reserved_area_size += length;
+
+	if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+	    (addr <= phyp_dump_info->reserved_scratch_addr +
+	     phyp_dump_info->reserved_scratch_size))
+		scratch_area_size += length;
+
+	if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+	    (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+		invalidate_last_dump(&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+		register_dump_area(&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+	}
+}
+
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ *   "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ *   "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t store_release_region(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				const char *buf, size_t count)
+{
+	unsigned long start_addr, length, end_addr;
+	unsigned long start_pfn, nr_pages;
+	ssize_t ret;
+
+	ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+	if (ret != 2)
+		return -EINVAL;
+
+	track_freed_range(start_addr, length);
+
+	/* Range-check - don't free any reserved memory that
+	 * wasn't reserved for phyp-dump */
+	if (start_addr < phyp_dump_info->init_reserve_start)
+		start_addr = phyp_dump_info->init_reserve_start;
+
+	end_addr = phyp_dump_info->init_reserve_start +
+			phyp_dump_info->init_reserve_size;
+	if (start_addr+length > end_addr)
+		length = end_addr - start_addr;
+
+	/* Release the region of memory assed in by user */
+	start_pfn = PFN_DOWN(start_addr);
+	nr_pages = PFN_DOWN(length);
+	release_memory_range(start_pfn, nr_pages);
+
+	return count;
+}
+
+static ssize_t show_release_region(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	u64 second_addr_range;
+
+	/* total reserved size - start of scratch area */
+	second_addr_range = phyp_dump_info->init_reserve_size -
+				phyp_dump_info->reserved_scratch_size;
+	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+		phdr.cpu_data.destination_address,
+		phdr.cpu_data.length_copied,
+		phdr.hpte_data.destination_address,
+		phdr.hpte_data.length_copied,
+		phdr.kernel_data.destination_address,
+		phdr.kernel_data.length_copied,
+		phyp_dump_info->init_reserve_start,
+		second_addr_range);
+}
+
+static struct kobj_attribute rr = __ATTR(release_region, 0600,
+					show_release_region,
+					store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+	struct device_node *rtas;
+	const struct phyp_dump_header *dump_header = NULL;
+	unsigned long dump_area_start;
+	unsigned long dump_area_length;
+	int header_len = 0;
+	int rc;
+
+	/* If no memory was reserved in early boot, there is nothing to do */
+	if (phyp_dump_info->init_reserve_size == 0)
+		return 0;
+
+	/* Return if phyp dump not supported */
+	if (!phyp_dump_info->phyp_dump_configured)
+		return -ENOSYS;
+
+	/* Is there dump data waiting for us? If there isn't,
+	 * then register a new dump area, and release all of
+	 * the rest of the reserved ram.
+	 *
+	 * The /rtas/ibm,kernel-dump rtas node is present only
+	 * if there is dump data waiting for us.
+	 */
+	rtas = of_find_node_by_path("/rtas");
+	if (rtas) {
+		dump_header = of_get_property(rtas, "ibm,kernel-dump",
+						&header_len);
+		of_node_put(rtas);
+	}
+
+	print_dump_header(dump_header);
+	dump_area_length = init_dump_header(&phdr);
+	/* align down */
+	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
+
+	if (dump_header == NULL) {
+		register_dump_area(&phdr, dump_area_start);
+		return 0;
+	}
+
+	/* re-register the dump area, if old dump was invalid */
+	if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+		invalidate_last_dump(&phdr, dump_area_start);
+		register_dump_area(&phdr, dump_area_start);
+		return 0;
+	}
+
+	if (dump_header) {
+		phyp_dump_info->reserved_scratch_addr =
+				dump_header->cpu_data.destination_address;
+		phyp_dump_info->reserved_scratch_size =
+				dump_header->cpu_data.source_length +
+				dump_header->hpte_data.source_length +
+				dump_header->kernel_data.source_length;
+	}
+
+	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+	rc = sysfs_create_file(kernel_kobj, &rr.attr);
+	if (rc)
+		printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
+									rc);
+
+	/* ToDo: re-register the dump area, for next time. */
+	return 0;
+}
+machine_subsys_initcall(pseries, phyp_dump_setup);
+
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	const unsigned int *sizes;
+
+	phyp_dump_info->phyp_dump_configured = 0;
+	phyp_dump_info->phyp_dump_is_active = 0;
+
+	if (depth != 1 || strcmp(uname, "rtas") != 0)
+		return 0;
+
+	if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+		phyp_dump_info->phyp_dump_configured++;
+
+	if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+		phyp_dump_info->phyp_dump_is_active++;
+
+	sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
+				    NULL);
+	if (!sizes)
+		return 0;
+
+	if (sizes[0] == 1)
+		phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+	if (sizes[3] == 2)
+		phyp_dump_info->hpte_region_size =
+						*((unsigned long *)&sizes[4]);
+	return 1;
+}
+
+/* Look for phyp_dump= cmdline option */
+static int __init early_phyp_dump_enabled(char *p)
+{
+	phyp_dump_info->phyp_dump_at_boot = 1;
+
+        if (!p)
+                return 0;
+
+        if (strncmp(p, "1", 1) == 0)
+		phyp_dump_info->phyp_dump_at_boot = 1;
+        else if (strncmp(p, "0", 1) == 0)
+		phyp_dump_info->phyp_dump_at_boot = 0;
+
+        return 0;
+}
+early_param("phyp_dump", early_phyp_dump_enabled);
+
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2800fce..ac75c10 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -222,14 +222,14 @@
 	tmp = strchr(buf, ' ');
 	if (!tmp) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	*tmp = '\0';
 
 	if (++tmp >= end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 
@@ -238,12 +238,12 @@
 	*length = simple_strtoul(tmp, &tmp, 10);
 	if (*length == -1) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	if (*tmp != ' ' || ++tmp >= end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 
@@ -252,12 +252,12 @@
 	tmp += *length;
 	if (tmp > end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	tmp++;
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 8e1ef16..e5b0ea8 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -195,31 +195,30 @@
 static int __init scanlog_init(void)
 {
 	struct proc_dir_entry *ent;
+	void *data;
+	int err = -ENOMEM;
 
 	ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
-	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_ERR "scan-log-dump not implemented on this system\n");
-		return -EIO;
-	}
+	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
+		return -ENODEV;
 
-        ent = create_proc_entry("ppc64/rtas/scan-log-dump",  S_IRUSR, NULL);
-	if (ent) {
-		ent->proc_fops = &scanlog_fops;
-		/* Ideally we could allocate a buffer < 4G */
-		ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
-		if (!ent->data) {
-			printk(KERN_ERR "Failed to allocate a buffer\n");
-			remove_proc_entry("scan-log-dump", ent->parent);
-			return -ENOMEM;
-		}
-		((unsigned int *)ent->data)[0] = 0;
-	} else {
-		printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
-		return -EIO;
-	}
+	/* Ideally we could allocate a buffer < 4G */
+	data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+	if (!data)
+		goto err;
+
+	ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+			  &scanlog_fops);
+	if (!ent)
+		goto err;
+
+	ent->data = data;
 	proc_ppc64_scan_log_dump = ent;
 
 	return 0;
+err:
+	kfree(data);
+	return err;
 }
 
 static void __exit scanlog_cleanup(void)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index fdb9b1c..90555a3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -393,6 +393,7 @@
 { 
 	unsigned int cpu = smp_processor_id();
 	unsigned long start_snooze;
+	unsigned long in_purr, out_purr;
 
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -400,6 +401,7 @@
 	 */
 	get_lppaca()->idle = 1;
 	get_lppaca()->donate_dedicated_cpu = 1;
+	in_purr = mfspr(SPRN_PURR);
 
 	/*
 	 * We come in with interrupts disabled, and need_resched()
@@ -432,6 +434,8 @@
 
 out:
 	HMT_medium();
+	out_purr = mfspr(SPRN_PURR);
+	get_lppaca()->wait_state_cycles += out_purr - in_purr;
 	get_lppaca()->donate_dedicated_cpu = 0;
 	get_lppaca()->idle = 0;
 }
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 15f3e85..851a0be 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -27,6 +27,7 @@
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
+obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
 obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index df8bd2b..3eceeb5 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -257,7 +257,7 @@
 		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 			goto out;
 
-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 	ret = -EIO;
 out:
 	spin_unlock_irqrestore(&cmd_lock, flags);
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index dd066bb..fa70ee3 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -99,7 +99,7 @@
 		if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 			goto out;
 
-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 	ret = -EIO;
 out:
 	spin_unlock_irqrestore(&cmd_lock, flags);
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index e0e24b0..005c2ec 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -37,6 +37,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -44,7 +45,6 @@
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/cacheflush.h>
-#include <asm/lmb.h>
 #include <asm/ppc-pci.h>
 
 #include "dart.h"
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6ffdda2..6131fd2 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -175,13 +175,16 @@
 	switch(type) {
 #ifdef CONFIG_PPC_DCR
 	case mpic_access_dcr:
-		return dcr_write(rb->dhost, reg, value);
+		dcr_write(rb->dhost, reg, value);
+		break;
 #endif
 	case mpic_access_mmio_be:
-		return out_be32(rb->base + (reg >> 2), value);
+		out_be32(rb->base + (reg >> 2), value);
+		break;
 	case mpic_access_mmio_le:
 	default:
-		return out_le32(rb->base + (reg >> 2), value);
+		out_le32(rb->base + (reg >> 2), value);
+		break;
 	}
 }
 
@@ -1000,7 +1003,7 @@
 				const char *name)
 {
 	struct mpic	*mpic;
-	u32		reg;
+	u32		greg_feature;
 	const char	*vers;
 	int		i;
 	int		intvec_top;
@@ -1064,7 +1067,8 @@
 
 	/* Look for protected sources */
 	if (node) {
-		unsigned int psize, bits, mapsize;
+		int psize;
+		unsigned int bits, mapsize;
 		const u32 *psrc =
 			of_get_property(node, "protected-sources", &psize);
 		if (psrc) {
@@ -1107,8 +1111,7 @@
 	 * in, try to obtain one
 	 */
 	if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
-		const u32 *reg;
-		reg = of_get_property(node, "reg", NULL);
+		const u32 *reg = of_get_property(node, "reg", NULL);
 		BUG_ON(reg == NULL);
 		paddr = of_translate_address(node, reg);
 		BUG_ON(paddr == OF_BAD_ADDR);
@@ -1137,12 +1140,13 @@
 	 * MPICs, num sources as well. On ISU MPICs, sources are counted
 	 * as ISUs are added
 	 */
-	reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
-	mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
 	if (isu_size == 0)
-		mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-				     >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+		mpic->num_sources =
+			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
@@ -1161,7 +1165,7 @@
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
 	/* Display version */
-	switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
 	case 1:
 		vers = "1.0";
 		break;
@@ -1321,7 +1325,7 @@
 
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
-	int is_ipi;
+	unsigned int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
@@ -1344,7 +1348,7 @@
 
 unsigned int mpic_irq_get_priority(unsigned int irq)
 {
-	int is_ipi;
+	unsigned int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5abfcd1..1814adb 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -527,6 +527,7 @@
  *
  * ibm,plb-pciex-440spe
  * ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
  *
  * Anything else will be rejected for now as they are all subtly
  * different unfortunately.
@@ -645,7 +646,7 @@
 	int time_out = 20;
 
 	/* Set PLL clock receiver to LVPECL */
-	mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
 
 	/* Shouldn't we do all the calibration stuff etc... here ? */
 	if (ppc440spe_pciex_check_reset(np))
@@ -659,8 +660,7 @@
 	}
 
 	/* De-assert reset of PCIe PLL, wait for lock */
-	mtdcri(SDR0, PESDR0_PLLLCT1,
-	       mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
 	udelay(3);
 
 	while (time_out) {
@@ -712,9 +712,8 @@
 		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
 		       0x35000000);
 	}
-	val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
-	       (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(1 << 24) | (1 << 16), 1 << 12);
 
 	return 0;
 }
@@ -775,6 +774,115 @@
 	.setup_utl	= ppc440speB_pciex_init_utl,
 };
 
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+	/* Nothing to do, return 2 ports */
+	return 2;
+}
+
+static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val;
+	u32 utlset1;
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+	else
+		val = PTYPE_ROOT_PORT << 20;
+
+	if (port->index == 0) {
+		val |= LNKW_X1 << 12;
+		utlset1 = 0x20000000;
+	} else {
+		val |= LNKW_X4 << 12;
+		utlset1 = 0x20101101;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+	switch (port->index) {
+	case 0:
+		mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+		mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+		break;
+
+	case 1:
+		mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+	       (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+	/* Poll for PHY reset */
+	/* XXX FIXME add timeout */
+	switch (port->index) {
+	case 0:
+		while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	case 1:
+		while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+		~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+	       PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return 0;
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(port->utl_base + PEUTL_PBCTL,	0x0800000c);
+	out_be32(port->utl_base + PEUTL_OUTTR,	0x08000000);
+	out_be32(port->utl_base + PEUTL_INTR,	0x02000000);
+	out_be32(port->utl_base + PEUTL_OPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_PBBSZ,	0x00000000);
+	out_be32(port->utl_base + PEUTL_IPHBSZ,	0x02000000);
+	out_be32(port->utl_base + PEUTL_IPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+	out_be32(port->utl_base + PEUTL_PCTL,	0x80800066);
+
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+	.core_init	= ppc460ex_pciex_core_init,
+	.port_init_hw	= ppc460ex_pciex_init_port_hw,
+	.setup_utl	= ppc460ex_pciex_init_utl,
+};
+
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -830,17 +938,9 @@
 	 * PCIe boards don't show this problem.
 	 * This has to be re-tested and fixed in a later release!
 	 */
-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
-       * configured as done previously by U-Boot. Then Linux will currently
-       * not reassign them. So the PHY reset is now done always. This will
-       * lead to problems with the Atheros PCIe board again.
-       */
 	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
 	if (!(val & 0x00001000))
 		ppc405ex_pcie_phy_reset(port);
-#else
-	ppc405ex_pcie_phy_reset(port);
-#endif
 
 	dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000);  /* guarded on */
 
@@ -896,6 +996,8 @@
 		else
 			ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
 	}
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
@@ -1042,8 +1144,7 @@
 		port->link = 0;
 	}
 
-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
-	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
 	msleep(100);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 1c07908..d04e40b 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -271,6 +271,59 @@
 #define PESDR1_405EX_PHYSTA		0x044C
 
 /*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST		0x0308
+#define PESDR0_460EX_L0BISTSTS		0x0309
+#define PESDR0_460EX_L0CDRCTL		0x030A
+#define PESDR0_460EX_L0DRV		0x030B
+#define PESDR0_460EX_L0REC		0x030C
+#define PESDR0_460EX_L0LPB		0x030D
+#define PESDR0_460EX_L0CLK		0x030E
+#define PESDR0_460EX_PHY_CTL_RST	0x030F
+#define PESDR0_460EX_RSTSTA		0x0310
+#define PESDR0_460EX_OBS		0x0311
+#define PESDR0_460EX_L0ERRC		0x0320
+
+#define PESDR1_460EX_L0BIST		0x0348
+#define PESDR1_460EX_L1BIST		0x0349
+#define PESDR1_460EX_L2BIST		0x034A
+#define PESDR1_460EX_L3BIST		0x034B
+#define PESDR1_460EX_L0BISTSTS		0x034C
+#define PESDR1_460EX_L1BISTSTS		0x034D
+#define PESDR1_460EX_L2BISTSTS		0x034E
+#define PESDR1_460EX_L3BISTSTS		0x034F
+#define PESDR1_460EX_L0CDRCTL		0x0350
+#define PESDR1_460EX_L1CDRCTL		0x0351
+#define PESDR1_460EX_L2CDRCTL		0x0352
+#define PESDR1_460EX_L3CDRCTL		0x0353
+#define PESDR1_460EX_L0DRV		0x0354
+#define PESDR1_460EX_L1DRV		0x0355
+#define PESDR1_460EX_L2DRV		0x0356
+#define PESDR1_460EX_L3DRV		0x0357
+#define PESDR1_460EX_L0REC		0x0358
+#define PESDR1_460EX_L1REC		0x0359
+#define PESDR1_460EX_L2REC		0x035A
+#define PESDR1_460EX_L3REC		0x035B
+#define PESDR1_460EX_L0LPB		0x035C
+#define PESDR1_460EX_L1LPB		0x035D
+#define PESDR1_460EX_L2LPB		0x035E
+#define PESDR1_460EX_L3LPB		0x035F
+#define PESDR1_460EX_L0CLK		0x0360
+#define PESDR1_460EX_L1CLK		0x0361
+#define PESDR1_460EX_L2CLK		0x0362
+#define PESDR1_460EX_L3CLK		0x0363
+#define PESDR1_460EX_PHY_CTL_RST	0x0364
+#define PESDR1_460EX_RSTSTA		0x0365
+#define PESDR1_460EX_OBS		0x0366
+#define PESDR1_460EX_L0ERRC		0x0368
+#define PESDR1_460EX_L1ERRC		0x0369
+#define PESDR1_460EX_L2ERRC		0x036A
+#define PESDR1_460EX_L3ERRC		0x036B
+#define PESDR0_460EX_IHS1		0x036C
+#define PESDR0_460EX_IHS2		0x036D
+
+/*
  * Of the above, some are common offsets from the base
  */
 #define PESDRn_UTLSET1			0x00
@@ -353,6 +406,12 @@
 #define PECFG_POM2LAL		0x390
 #define PECFG_POM2LAH		0x394
 
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB	0x10000000
+#define PESDRx_RCSSET_RSTGU	0x01000000
+#define PESDRx_RCSSET_RDY       0x00100000
+#define PESDRx_RCSSET_RSTDL     0x00010000
+#define PESDRx_RCSSET_RSTPYN    0x00001000
 
 enum
 {
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
new file mode 100644
index 0000000..5b32adc
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -0,0 +1,200 @@
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+	u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+	if (sr & L2C_SR_CPE) {
+		/* Read cache trapped address */
+		u32 addr = l2c_diag(0x42000000);
+		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+	if (sr & L2C_SR_TPE) {
+		/* Read tag trapped address */
+		u32 addr = l2c_diag(0x82000000) >> 16;
+		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+
+	/* Clear parity errors */
+	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+		mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+		mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+	} else {
+		printk(KERN_EMERG "L2C: LRU error\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+	struct device_node *np;
+	u32 r;
+	unsigned long flags;
+	int irq;
+	const u32 *dcrreg;
+	u32 dcrbase_isram;
+	int len;
+	const u32 *prop;
+	u32 l2_size;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+	if (!np)
+		return 0;
+
+	/* Get l2 cache size */
+	prop = of_get_property(np, "cache-size", NULL);
+	if (prop == NULL) {
+		printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	l2_size = prop[0];
+
+	/* Map DCRs */
+	dcrreg = of_get_property(np, "dcr-reg", &len);
+	if (!dcrreg || (len != 4 * sizeof(u32))) {
+		printk(KERN_ERR "%s: Can't get DCR register base !",
+		       np->full_name);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	dcrbase_isram = dcrreg[0];
+	dcrbase_l2c = dcrreg[2];
+
+	/* Get and map irq number from device tree */
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR "irq_of_parse_and_map failed\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	/* Install error handler */
+	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+		printk(KERN_ERR "Cannot install L2C error handler"
+		       ", cache is not enabled\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	asm volatile ("sync" ::: "memory");
+
+	/* Disable SRAM */
+	mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+	/* Enable L2_MODE without ICU/DCU */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+		~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+	/* Hardware Clear Command */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	/* Clear Cache Parity and Tag Errors */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+	/* Enable 64G snoop region starting at 0 */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+	asm volatile ("sync" ::: "memory");
+
+	/* Enable ICU/DCU ports */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+	       | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+	/* Check for 460EX/GT special handling */
+	if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+		r |= L2C_CFG_RDBW;
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	asm volatile ("sync; isync" ::: "memory");
+	local_irq_restore(flags);
+
+	printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+	of_node_put(np);
+	return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+	while (1)
+		;	/* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e53ea4d..736c1fc 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -200,7 +200,7 @@
 {
 	unsigned int i;
 
-	printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
+	printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
 	for (i = 0; i < num_par_io_ports; i++) {
 		printk(KERN_INFO "	cpodr[%u]=%08x\n", i,
 			in_be32(&par_io[i].cpodr));
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3223acb..bcf88e6 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -148,57 +148,57 @@
 
 	/* check if the UCC port number is in range. */
 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
 		return -EINVAL;
 	}
 
 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
-			__FUNCTION__);
+			__func__);
 		return -EINVAL;
 	}
 
 	/* Validate Virtual Fifo register values */
 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is too small\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
 	if (!uccf) {
 		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__FUNCTION__);
+			__func__);
 		return -ENOMEM;
 	}
 
@@ -207,7 +207,7 @@
 	/* Set the PHY base address */
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -230,7 +230,7 @@
 	/* Set UCC to fast type */
 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
 	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -270,7 +270,7 @@
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -283,7 +283,7 @@
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -314,7 +314,7 @@
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}
@@ -323,7 +323,7 @@
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index b2870b2..a578bc7 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -142,7 +142,7 @@
 
 	/* check if the UCC port number is in range. */
 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
 		return -EINVAL;
 	}
 
@@ -161,7 +161,7 @@
 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
 	if (!uccs) {
 		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__FUNCTION__);
+			__func__);
 		return -ENOMEM;
 	}
 
@@ -170,7 +170,7 @@
 	/* Set the PHY base address */
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -189,7 +189,7 @@
 	uccs->us_pram_offset =
 		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
 	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}
@@ -202,7 +202,7 @@
 	/* Set UCC to slow type */
 	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
 	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot set UCC type", __func__);
 		ucc_slow_free(uccs);
 		return ret;
 	}
@@ -216,7 +216,7 @@
 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
 				QE_ALIGNMENT_OF_BD);
 	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
 			us_info->rx_bd_ring_len);
 		uccs->rx_base_offset = 0;
 		ucc_slow_free(uccs);
@@ -227,7 +227,7 @@
 		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
 			QE_ALIGNMENT_OF_BD);
 	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
 		uccs->tx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
@@ -317,7 +317,7 @@
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
@@ -325,7 +325,7 @@
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index be2808a..d4d15aa 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -84,7 +84,7 @@
 
 		ret = of_address_to_resource(np, 0, &r[0]);
 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
-			__FUNCTION__,r[0].name, r[0].start, r[0].end);
+			__func__,r[0].name, r[0].start, r[0].end);
 		if (ret)
 			goto err;
 
@@ -93,7 +93,7 @@
 		r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
-			__FUNCTION__,r[1].name, r[1].start, r[1].end);
+			__func__,r[1].name, r[1].start, r[1].end);
 
 		tsi_eth_dev =
 		    platform_device_register_simple("tsi-ethernet", i++, &r[0],
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 31d3d33..ac1a72d 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -207,7 +207,7 @@
 	/* PCI Config mapping */
 	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
 	tsi108_pci_cfg_phys = cfg_phys;
-	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
 	    tsi108_pci_cfg_base);
 
 	/* Fetch host bridge registers address */
@@ -395,7 +395,7 @@
 static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {	unsigned int irq;
-	DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
 	if ((virq >= 1) && (virq <= 4)){
 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
 		get_irq_desc(irq)->status |= IRQ_LEVEL;
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 9d656de..752443d 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -43,7 +43,7 @@
 ({									\
 	u32 offset = offsetof(immap_t, member);				\
 	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      sizeof( ((immap_t*)0)->member));		\
+			      FIELD_SIZEOF(immap_t, member));		\
 	addr;								\
 })
 
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 11b0aa6..1d4b49a 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -520,7 +520,7 @@
 #ifdef	CONFIG_USE_MDIO
 			fec_enet_mii(dev);
 #else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
 #endif	/* CONFIG_USE_MDIO */
 		}
 
@@ -1441,7 +1441,7 @@
 		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
 	}
 #else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
 #endif	/* CONFIG_USE_MDIO */
 
 #ifndef CONFIG_RPXCLASSIC
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 1b0ec72..e7e642b 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -701,23 +701,6 @@
 	b	fast_exception_return
 
 /*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
-	lwz	r3,_MSR(r1)
-	oris	r3,r3,MSR_VEC@h
-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
-	lis	r3,87f@h
-	ori	r3,r3,87f@l
-	mr	r4,r2		/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
-	.align	4,0
-
-/*
  * giveup_altivec(tsk)
  * Disable AltiVec for the task given as the argument,
  * and save the AltiVec registers in its thread_struct.
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 7444df3..1a63711 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -109,7 +109,6 @@
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	i = max_mapnr;
 	while (i-- > 0) {
 		total++;
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 44d4398..fc928a2 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -512,7 +512,7 @@
 {
 	int irq;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 	i8259_init(0, 0);
 	mv64360_init_irq();
 
@@ -569,7 +569,7 @@
 	};
 	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
 
-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
+	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
 		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
 
 	return PCI_IRQ_TABLE_LOOKUP;
@@ -1300,7 +1300,7 @@
 	u32 data;
 	u8 data8;
 
-	pr_debug("%s: enter\n", __FUNCTION__);
+	pr_debug("%s: enter\n", __func__);
 
 	/* Wait for debugger? */
 	if (ppc7d_wait_debugger) {
@@ -1333,7 +1333,7 @@
         ppc_md.set_rtc_time = ppc7d_set_rtc_time;
         ppc_md.get_rtc_time = ppc7d_get_rtc_time;
 
-	pr_debug("%s: exit\n", __FUNCTION__);
+	pr_debug("%s: exit\n", __func__);
 }
 
 /* Called from machine_init(), early, before any of the __init functions
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 9f504fc..ab0cf4ce 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -279,7 +279,7 @@
 
 int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
 {
-	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+	static DEFINE_SPINLOCK(lock);
 	struct mpc52xx_cdm __iomem *cdm;
 	unsigned long flags;
 	u16 mclken_div;
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 463d1be..2667a9d 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,7 @@
 	bool
 	default y
 	select HAVE_IDE
+	select HAVE_LMB
 	help
 	  SPARC is a family of RISC microprocessors designed and marketed by
 	  Sun Microsystems, incorporated.  This port covers the newer 64-bit
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 41ca721..ebfe038 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -69,7 +69,7 @@
 enum {
 	PARTITION_SHIFT = 3,
 	MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
-	MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
+	MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
 };
 
 static DEFINE_SPINLOCK(viodasd_spinlock);
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index f577dae..aa7f796 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -74,7 +74,7 @@
 
 /**
  * buffer_icap_get_status - Get the contents of the status register.
- * @base_address: is the base address of the device
+ * @drvdata: a pointer to the drvdata.
  *
  * The status register contains the ICAP status and the done bit.
  *
@@ -88,9 +88,9 @@
  * D1 - Always 1
  * D0 - Done bit
  **/
-static inline u32 buffer_icap_get_status(void __iomem *base_address)
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata)
 {
-	return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+	return in_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET);
 }
 
 /**
@@ -117,20 +117,8 @@
  **/
 static inline bool buffer_icap_busy(void __iomem *base_address)
 {
-	return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
-}
-
-/**
- * buffer_icap_busy - Return true if the icap device is not busy
- * @base_address: is the base address of the device
- *
- * The queries the low order bit of the status register, which
- * indicates whether the current configuration or readback operation
- * has completed.
- **/
-static inline bool buffer_icap_done(void __iomem *base_address)
-{
-	return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+	u32 status = in_be32(base_address + XHI_STATUS_REG_OFFSET);
+	return (status & 1) == XHI_NOT_FINISHED;
 }
 
 /**
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 0318495..c5b1840 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -44,8 +44,6 @@
 #include <asm/io.h>
 #include "xilinx_hwicap.h"
 
-void buffer_icap_reset(struct hwicap_drvdata *drvdata);
-
 /* Loads a partial bitstream from system memory. */
 int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 Size);
@@ -54,4 +52,7 @@
 int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 Size);
 
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata);
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
 #endif
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 6f45dbd..776b505 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -78,13 +78,6 @@
 #define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
 #define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
 
-/* Status Register (SR) */
-#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
-#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
-#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
-#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
-#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
-
 
 #define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
 #define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
@@ -152,13 +145,35 @@
 }
 
 /**
+ * fifo_icap_get_status - Get the contents of the status register.
+ * @drvdata: a pointer to the drvdata.
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata)
+{
+	u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+	dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+	return status;
+}
+
+/**
  * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
  * @drvdata: a pointer to the drvdata.
  **/
 static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 {
 	u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
-	dev_dbg(drvdata->dev, "Getting status = %x\n", status);
 	return (status & XHI_SR_DONE_MASK) ? 0 : 1;
 }
 
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 4d3068d..ffabd3b 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -56,6 +56,7 @@
 		u32 *FrameBuffer,
 		u32 NumWords);
 
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata);
 void fifo_icap_reset(struct hwicap_drvdata *drvdata);
 void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 2284fa2..016f905 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -36,7 +36,7 @@
  *****************************************************************************/
 
 /*
- * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * This is the code behind /dev/icap* -- it allows a user-space
  * application to use the Xilinx ICAP subsystem.
  *
  * The following operations are possible:
@@ -67,7 +67,7 @@
  * user-space application code that uses this device.  The simplest
  * way to use this interface is simply:
  *
- * cp foo.bit /dev/xilinx_icap
+ * cp foo.bit /dev/icap0
  *
  * Note that unless foo.bit is an appropriately constructed partial
  * bitstream, this has a high likelyhood of overwriting the design
@@ -105,18 +105,14 @@
 #include "buffer_icap.h"
 #include "fifo_icap.h"
 
-#define DRIVER_NAME "xilinx_icap"
+#define DRIVER_NAME "icap"
 
 #define HWICAP_REGS   (0x10000)
 
-/* dynamically allocate device number */
-static int xhwicap_major;
-static int xhwicap_minor;
+#define XHWICAP_MAJOR 259
+#define XHWICAP_MINOR 0
 #define HWICAP_DEVICES 1
 
-module_param(xhwicap_major, int, S_IRUGO);
-module_param(xhwicap_minor, int, S_IRUGO);
-
 /* An array, which is set to true when the device is registered. */
 static bool probed_devices[HWICAP_DEVICES];
 static struct mutex icap_sem;
@@ -250,8 +246,26 @@
 	 * Create the data to be written to the ICAP.
 	 */
 	buffer[index++] = XHI_DUMMY_PACKET;
+	buffer[index++] = XHI_NOOP_PACKET;
 	buffer[index++] = XHI_SYNC_PACKET;
 	buffer[index++] = XHI_NOOP_PACKET;
+	buffer[index++] = XHI_NOOP_PACKET;
+
+	/*
+	 * Write the data to the FIFO and initiate the transfer of data present
+	 * in the FIFO to the ICAP device.
+	 */
+	status = drvdata->config->set_configuration(drvdata,
+						    &buffer[0], index);
+	if (status)
+		return status;
+
+	/* If the syncword was not found, then we need to start over. */
+	status = drvdata->config->get_status(drvdata);
+	if ((status & XHI_SR_DALIGN_MASK) != XHI_SR_DALIGN_MASK)
+		return -EIO;
+
+	index = 0;
 	buffer[index++] = hwicap_type_1_read(reg) | 1;
 	buffer[index++] = XHI_NOOP_PACKET;
 	buffer[index++] = XHI_NOOP_PACKET;
@@ -587,7 +601,7 @@
 	probed_devices[id] = 1;
 	mutex_unlock(&icap_sem);
 
-	devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+	devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
 
 	drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
 	if (!drvdata) {
@@ -664,12 +678,14 @@
 static struct hwicap_driver_config buffer_icap_config = {
 	.get_configuration = buffer_icap_get_configuration,
 	.set_configuration = buffer_icap_set_configuration,
+	.get_status = buffer_icap_get_status,
 	.reset = buffer_icap_reset,
 };
 
 static struct hwicap_driver_config fifo_icap_config = {
 	.get_configuration = fifo_icap_get_configuration,
 	.set_configuration = fifo_icap_set_configuration,
+	.get_status = fifo_icap_get_status,
 	.reset = fifo_icap_reset,
 };
 
@@ -690,7 +706,7 @@
 	dev_set_drvdata(dev, NULL);
 
 	mutex_lock(&icap_sem);
-	probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+	probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
 	mutex_unlock(&icap_sem);
 	return 0;		/* success */
 }
@@ -830,23 +846,12 @@
 	icap_class = class_create(THIS_MODULE, "xilinx_config");
 	mutex_init(&icap_sem);
 
-	if (xhwicap_major) {
-		devt = MKDEV(xhwicap_major, xhwicap_minor);
-		retval = register_chrdev_region(
-				devt,
-				HWICAP_DEVICES,
-				DRIVER_NAME);
-		if (retval < 0)
-			return retval;
-	} else {
-		retval = alloc_chrdev_region(&devt,
-				xhwicap_minor,
-				HWICAP_DEVICES,
-				DRIVER_NAME);
-		if (retval < 0)
-			return retval;
-		xhwicap_major = MAJOR(devt);
-	}
+	devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
+	retval = register_chrdev_region(devt,
+					HWICAP_DEVICES,
+					DRIVER_NAME);
+	if (retval < 0)
+		return retval;
 
 	retval = platform_driver_register(&hwicap_platform_driver);
 
@@ -871,7 +876,7 @@
 
 static void __exit hwicap_module_cleanup(void)
 {
-	dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+	dev_t devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
 
 	class_destroy(icap_class);
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 405fee7..1f9c8b0 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -65,10 +65,27 @@
 };
 
 struct hwicap_driver_config {
+	/* Read configuration data given by size into the data buffer.
+	   Return 0 if successful. */
 	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
+	/* Write configuration data given by size from the data buffer.
+	   Return 0 if successful. */
 	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
+	/* Get the status register, bit pattern given by:
+	 * D8 - 0 = configuration error
+	 * D7 - 1 = alignment found
+	 * D6 - 1 = readback in progress
+	 * D5 - 0 = abort in progress
+	 * D4 - Always 1
+	 * D3 - Always 1
+	 * D2 - Always 1
+	 * D1 - Always 1
+	 * D0 - 1 = operation completed
+	 */
+	u32 (*get_status)(struct hwicap_drvdata *drvdata);
+	/* Reset the hw */
 	void (*reset)(struct hwicap_drvdata *drvdata);
 };
 
@@ -163,6 +180,13 @@
 /* Constant to use for CRC check when CRC has been disabled */
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
+
 /**
  * hwicap_type_1_read - Generates a Type 1 read packet header.
  * @reg: is the address of the register to be read back.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3b1ea32..4b44273 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -218,7 +218,8 @@
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
+pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 2e39e028..c50f0f4 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -55,15 +55,10 @@
  * - Multiqueue RX/TX
  */
 
-
-/* Must be a power of two */
-#define RX_RING_SIZE 2048
-#define TX_RING_SIZE 4096
-
 #define LRO_MAX_AGGR 64
 
 #define PE_MIN_MTU	64
-#define PE_MAX_MTU	1500
+#define PE_MAX_MTU	9000
 #define PE_DEF_MTU	ETH_DATA_LEN
 
 #define DEFAULT_MSG_ENABLE	  \
@@ -76,16 +71,6 @@
 	 NETIF_MSG_RX_ERR	| \
 	 NETIF_MSG_TX_ERR)
 
-#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
-#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
-#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
-#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
-#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
-
-#define RING_USED(ring)		(((ring)->next_to_fill - (ring)->next_to_clean) \
-				 & ((ring)->size - 1))
-#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
-
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
 MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
@@ -94,6 +79,8 @@
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
 
+extern const struct ethtool_ops pasemi_mac_ethtool_ops;
+
 static int translation_enabled(void)
 {
 #if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
@@ -322,6 +309,103 @@
 	return (nfrags + 3) & ~1;
 }
 
+static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
+{
+	struct pasemi_mac_csring *ring;
+	u32 val;
+	unsigned int cfg;
+	int chno;
+
+	ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
+				       offsetof(struct pasemi_mac_csring, chan));
+
+	if (!ring) {
+		dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
+		goto out_chan;
+	}
+
+	chno = ring->chan.chno;
+
+	ring->size = CS_RING_SIZE;
+	ring->next_to_fill = 0;
+
+	/* Allocate descriptors */
+	if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
+		goto out_ring_desc;
+
+	write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
+		      PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
+	val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
+	val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
+
+	write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
+
+	ring->events[0] = pasemi_dma_alloc_flag();
+	ring->events[1] = pasemi_dma_alloc_flag();
+	if (ring->events[0] < 0 || ring->events[1] < 0)
+		goto out_flags;
+
+	pasemi_dma_clear_flag(ring->events[0]);
+	pasemi_dma_clear_flag(ring->events[1]);
+
+	ring->fun = pasemi_dma_alloc_fun();
+	if (ring->fun < 0)
+		goto out_fun;
+
+	cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
+	      PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
+	      PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
+
+	if (translation_enabled())
+		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+
+	write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
+
+	/* enable channel */
+	pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
+					   PAS_DMA_TXCHAN_TCMDSTA_DB |
+					   PAS_DMA_TXCHAN_TCMDSTA_DE |
+					   PAS_DMA_TXCHAN_TCMDSTA_DA);
+
+	return ring;
+
+out_fun:
+out_flags:
+	if (ring->events[0] >= 0)
+		pasemi_dma_free_flag(ring->events[0]);
+	if (ring->events[1] >= 0)
+		pasemi_dma_free_flag(ring->events[1]);
+	pasemi_dma_free_ring(&ring->chan);
+out_ring_desc:
+	pasemi_dma_free_chan(&ring->chan);
+out_chan:
+
+	return NULL;
+}
+
+static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
+{
+	int i;
+	mac->cs[0] = pasemi_mac_setup_csring(mac);
+	if (mac->type == MAC_TYPE_XAUI)
+		mac->cs[1] = pasemi_mac_setup_csring(mac);
+	else
+		mac->cs[1] = 0;
+
+	for (i = 0; i < MAX_CS; i++)
+		if (mac->cs[i])
+			mac->num_cs++;
+}
+
+static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
+{
+	pasemi_dma_stop_chan(&csring->chan);
+	pasemi_dma_free_flag(csring->events[0]);
+	pasemi_dma_free_flag(csring->events[1]);
+	pasemi_dma_free_ring(&csring->chan);
+	pasemi_dma_free_chan(&csring->chan);
+}
+
 static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
 {
 	struct pasemi_mac_rxring *ring;
@@ -445,7 +529,7 @@
 	cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
 	      PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
 	      PAS_DMA_TXCHAN_CFG_UP |
-	      PAS_DMA_TXCHAN_CFG_WT(2);
+	      PAS_DMA_TXCHAN_CFG_WT(4);
 
 	if (translation_enabled())
 		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
@@ -810,13 +894,21 @@
 		u64 mactx = TX_DESC(txring, i);
 		struct sk_buff *skb;
 
-		skb = TX_DESC_INFO(txring, i+1).skb;
-		nr_frags = TX_DESC_INFO(txring, i).dma;
-
 		if ((mactx  & XCT_MACTX_E) ||
 		    (*chan->status & PAS_STATUS_ERROR))
 			pasemi_mac_tx_error(mac, mactx);
 
+		/* Skip over control descriptors */
+		if (!(mactx & XCT_MACTX_LLEN_M)) {
+			TX_DESC(txring, i) = 0;
+			TX_DESC(txring, i+1) = 0;
+			buf_count = 2;
+			continue;
+		}
+
+		skb = TX_DESC_INFO(txring, i+1).skb;
+		nr_frags = TX_DESC_INFO(txring, i).dma;
+
 		if (unlikely(mactx & XCT_MACTX_O))
 			/* Not yet transmitted */
 			break;
@@ -1041,13 +1133,7 @@
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int flags;
-	int ret;
-
-	/* enable rx section */
-	write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
-
-	/* enable tx section */
-	write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+	int i, ret;
 
 	flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
 		PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
@@ -1064,6 +1150,16 @@
 	if (!mac->tx)
 		goto out_tx_ring;
 
+	if (dev->mtu > 1500) {
+		pasemi_mac_setup_csrings(mac);
+		if (!mac->num_cs)
+			goto out_tx_ring;
+	}
+
+	/* Zero out rmon counters */
+	for (i = 0; i < 32; i++)
+		write_mac_reg(mac, PAS_MAC_RMON(i), 0);
+
 	/* 0x3ff with 33MHz clock is about 31us */
 	write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
 		      PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
@@ -1247,7 +1343,7 @@
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int sta;
-	int rxch, txch;
+	int rxch, txch, i;
 
 	rxch = rx_ring(mac)->chan.chno;
 	txch = tx_ring(mac)->chan.chno;
@@ -1292,6 +1388,9 @@
 	free_irq(mac->tx->chan.irq, mac->tx);
 	free_irq(mac->rx->chan.irq, mac->rx);
 
+	for (i = 0; i < mac->num_cs; i++)
+		pasemi_mac_free_csring(mac->cs[i]);
+
 	/* Free resources */
 	pasemi_mac_free_rx_resources(mac);
 	pasemi_mac_free_tx_resources(mac);
@@ -1299,36 +1398,114 @@
 	return 0;
 }
 
+static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
+				    const dma_addr_t *map,
+				    const unsigned int *map_size,
+				    struct pasemi_mac_txring *txring,
+				    struct pasemi_mac_csring *csring)
+{
+	u64 fund;
+	dma_addr_t cs_dest;
+	const int nh_off = skb_network_offset(skb);
+	const int nh_len = skb_network_header_len(skb);
+	const int nfrags = skb_shinfo(skb)->nr_frags;
+	int cs_size, i, fill, hdr, cpyhdr, evt;
+	dma_addr_t csdma;
+
+	fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
+	       XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+	       XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
+	       XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
+
+	switch (ip_hdr(skb)->protocol) {
+	case IPPROTO_TCP:
+		fund |= XCT_FUN_SIG_TCP4;
+		/* TCP checksum is 16 bytes into the header */
+		cs_dest = map[0] + skb_transport_offset(skb) + 16;
+		break;
+	case IPPROTO_UDP:
+		fund |= XCT_FUN_SIG_UDP4;
+		/* UDP checksum is 6 bytes into the header */
+		cs_dest = map[0] + skb_transport_offset(skb) + 6;
+		break;
+	default:
+		BUG();
+	}
+
+	/* Do the checksum offloaded */
+	fill = csring->next_to_fill;
+	hdr = fill;
+
+	CS_DESC(csring, fill++) = fund;
+	/* Room for 8BRES. Checksum result is really 2 bytes into it */
+	csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
+	CS_DESC(csring, fill++) = 0;
+
+	CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
+	for (i = 1; i <= nfrags; i++)
+		CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
+
+	fill += i;
+	if (fill & 1)
+		fill++;
+
+	/* Copy the result into the TCP packet */
+	cpyhdr = fill;
+	CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+				  XCT_FUN_LLEN(2) | XCT_FUN_SE;
+	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
+	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
+	fill++;
+
+	evt = !csring->last_event;
+	csring->last_event = evt;
+
+	/* Event handshaking with MAC TX */
+	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
+	CS_DESC(csring, fill++) = 0;
+	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
+	CS_DESC(csring, fill++) = 0;
+	csring->next_to_fill = fill & (CS_RING_SIZE-1);
+
+	cs_size = fill - hdr;
+	write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
+
+	/* TX-side event handshaking */
+	fill = txring->next_to_fill;
+	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
+	TX_DESC(txring, fill++) = 0;
+	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+				  CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
+	TX_DESC(txring, fill++) = 0;
+	txring->next_to_fill = fill;
+
+	write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
+
+	return;
+}
+
 static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct pasemi_mac *mac = netdev_priv(dev);
-	struct pasemi_mac_txring *txring;
-	u64 dflags, mactx;
+	struct pasemi_mac * const mac = netdev_priv(dev);
+	struct pasemi_mac_txring * const txring = tx_ring(mac);
+	struct pasemi_mac_csring *csring;
+	u64 dflags = 0;
+	u64 mactx;
 	dma_addr_t map[MAX_SKB_FRAGS+1];
 	unsigned int map_size[MAX_SKB_FRAGS+1];
 	unsigned long flags;
 	int i, nfrags;
 	int fill;
+	const int nh_off = skb_network_offset(skb);
+	const int nh_len = skb_network_header_len(skb);
+
+	prefetch(&txring->ring_info);
 
 	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
 
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const unsigned char *nh = skb_network_header(skb);
-
-		switch (ip_hdr(skb)->protocol) {
-		case IPPROTO_TCP:
-			dflags |= XCT_MACTX_CSUM_TCP;
-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
-			dflags |= XCT_MACTX_IPO(nh - skb->data);
-			break;
-		case IPPROTO_UDP:
-			dflags |= XCT_MACTX_CSUM_UDP;
-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
-			dflags |= XCT_MACTX_IPO(nh - skb->data);
-			break;
-		}
-	}
-
 	nfrags = skb_shinfo(skb)->nr_frags;
 
 	map[0] = pci_map_single(mac->dma_pdev, skb->data, skb_headlen(skb),
@@ -1350,24 +1527,46 @@
 		}
 	}
 
+	if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
+		switch (ip_hdr(skb)->protocol) {
+		case IPPROTO_TCP:
+			dflags |= XCT_MACTX_CSUM_TCP;
+			dflags |= XCT_MACTX_IPH(nh_len >> 2);
+			dflags |= XCT_MACTX_IPO(nh_off);
+			break;
+		case IPPROTO_UDP:
+			dflags |= XCT_MACTX_CSUM_UDP;
+			dflags |= XCT_MACTX_IPH(nh_len >> 2);
+			dflags |= XCT_MACTX_IPO(nh_off);
+			break;
+		default:
+			WARN_ON(1);
+		}
+	}
+
 	mactx = dflags | XCT_MACTX_LLEN(skb->len);
 
-	txring = tx_ring(mac);
-
 	spin_lock_irqsave(&txring->lock, flags);
 
-	fill = txring->next_to_fill;
-
 	/* Avoid stepping on the same cache line that the DMA controller
 	 * is currently about to send, so leave at least 8 words available.
 	 * Total free space needed is mactx + fragments + 8
 	 */
-	if (RING_AVAIL(txring) < nfrags + 10) {
+	if (RING_AVAIL(txring) < nfrags + 14) {
 		/* no room -- stop the queue and wait for tx intr */
 		netif_stop_queue(dev);
 		goto out_err;
 	}
 
+	/* Queue up checksum + event descriptors, if needed */
+	if (mac->num_cs && skb->ip_summed == CHECKSUM_PARTIAL && skb->len > 1540) {
+		csring = mac->cs[mac->last_cs];
+		mac->last_cs = (mac->last_cs + 1) % mac->num_cs;
+
+		pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
+	}
+
+	fill = txring->next_to_fill;
 	TX_DESC(txring, fill) = mactx;
 	TX_DESC_INFO(txring, fill).dma = nfrags;
 	fill++;
@@ -1445,8 +1644,9 @@
 {
 	struct pasemi_mac *mac = netdev_priv(dev);
 	unsigned int reg;
-	unsigned int rcmdsta;
+	unsigned int rcmdsta = 0;
 	int running;
+	int ret = 0;
 
 	if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
 		return -EINVAL;
@@ -1468,6 +1668,16 @@
 		pasemi_mac_pause_rxint(mac);
 		pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
 		pasemi_mac_free_rx_buffers(mac);
+
+	}
+
+	/* Setup checksum channels if large MTU and none already allocated */
+	if (new_mtu > 1500 && !mac->num_cs) {
+		pasemi_mac_setup_csrings(mac);
+		if (!mac->num_cs) {
+			ret = -ENOMEM;
+			goto out;
+		}
 	}
 
 	/* Change maxf, i.e. what size frames are accepted.
@@ -1482,6 +1692,7 @@
 	/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
 	mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
 
+out:
 	if (running) {
 		write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
 			      rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
@@ -1494,7 +1705,7 @@
 		pasemi_mac_intf_enable(mac);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int __devinit
@@ -1528,7 +1739,7 @@
 	netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
 
 	dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
-			NETIF_F_HIGHDMA;
+			NETIF_F_HIGHDMA | NETIF_F_GSO;
 
 	mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
 	mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
@@ -1590,6 +1801,7 @@
 	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
 
 	dev->change_mtu = pasemi_mac_change_mtu;
+	dev->ethtool_ops = &pasemi_mac_ethtool_ops;
 
 	if (err)
 		goto out;
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 99e7b93..1a115ec 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -26,7 +26,14 @@
 #include <linux/spinlock.h>
 #include <linux/phy.h>
 
+/* Must be a power of two */
+#define RX_RING_SIZE 2048
+#define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
+
+
 #define MAX_LRO_DESCRIPTORS 8
+#define MAX_CS	2
 
 struct pasemi_mac_txring {
 	struct pasemi_dmachan chan; /* Must be first */
@@ -51,6 +58,15 @@
 	struct pasemi_mac *mac;	/* Needed in intr handler */
 };
 
+struct pasemi_mac_csring {
+	struct pasemi_dmachan chan;
+	unsigned int	size;
+	unsigned int	next_to_fill;
+	int		events[2];
+	int		last_event;
+	int		fun;
+};
+
 struct pasemi_mac {
 	struct net_device *netdev;
 	struct pci_dev *pdev;
@@ -60,10 +76,12 @@
 	struct napi_struct napi;
 
 	int		bufsz; /* RX ring buffer size */
+	int		last_cs;
+	int		num_cs;
+	u32		dma_if;
 	u8		type;
 #define MAC_TYPE_GMAC	1
 #define MAC_TYPE_XAUI	2
-	u32	dma_if;
 
 	u8		mac_addr[6];
 
@@ -74,6 +92,7 @@
 
 	struct pasemi_mac_txring *tx;
 	struct pasemi_mac_rxring *rx;
+	struct pasemi_mac_csring *cs[MAX_CS];
 	char		tx_irq_name[10];		/* "eth%d tx" */
 	char		rx_irq_name[10];		/* "eth%d rx" */
 	int	link;
@@ -90,6 +109,16 @@
 	dma_addr_t	dma;
 };
 
+#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num)	((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
+
+#define RING_USED(ring)	(((ring)->next_to_fill - (ring)->next_to_clean) \
+				& ((ring)->size - 1))
+#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
 
 /* PCI register offsets and formats */
 
@@ -101,6 +130,7 @@
 	PAS_MAC_CFG_ADR0 = 0x8c,
 	PAS_MAC_CFG_ADR1 = 0x90,
 	PAS_MAC_CFG_TXP = 0x98,
+	PAS_MAC_CFG_RMON = 0x100,
 	PAS_MAC_IPC_CHNL = 0x208,
 };
 
@@ -172,6 +202,8 @@
 #define PAS_MAC_CFG_TXP_TIFG(x)		(((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
 					 PAS_MAC_CFG_TXP_TIFG_M)
 
+#define PAS_MAC_RMON(r)			(0x100+(r)*4)
+
 #define PAS_MAC_IPC_CHNL_DCHNO_M	0x003f0000
 #define PAS_MAC_IPC_CHNL_DCHNO_S	16
 #define PAS_MAC_IPC_CHNL_DCHNO(x)	(((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
@@ -181,4 +213,5 @@
 #define PAS_MAC_IPC_CHNL_BCH(x)		(((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
 					 PAS_MAC_IPC_CHNL_BCH_M)
 
+
 #endif /* PASEMI_MAC_H */
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
new file mode 100644
index 0000000..5e8df3a
--- /dev/null
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Ethtool hooks for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/inet_lro.h>
+
+#include <asm/pasemi_dma.h>
+#include "pasemi_mac.h"
+
+static struct {
+	const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+	{ "rx-drops" },
+	{ "rx-bytes" },
+	{ "rx-packets" },
+	{ "rx-broadcast-packets" },
+	{ "rx-multicast-packets" },
+	{ "rx-crc-errors" },
+	{ "rx-undersize-errors" },
+	{ "rx-oversize-errors" },
+	{ "rx-short-fragment-errors" },
+	{ "rx-jabber-errors" },
+	{ "rx-64-byte-packets" },
+	{ "rx-65-127-byte-packets" },
+	{ "rx-128-255-byte-packets" },
+	{ "rx-256-511-byte-packets" },
+	{ "rx-512-1023-byte-packets" },
+	{ "rx-1024-1518-byte-packets" },
+	{ "rx-pause-frames" },
+	{ "tx-bytes" },
+	{ "tx-packets" },
+	{ "tx-broadcast-packets" },
+	{ "tx-multicast-packets" },
+	{ "tx-collisions" },
+	{ "tx-late-collisions" },
+	{ "tx-excessive-collisions" },
+	{ "tx-crc-errors" },
+	{ "tx-undersize-errors" },
+	{ "tx-oversize-errors" },
+	{ "tx-64-byte-packets" },
+	{ "tx-65-127-byte-packets" },
+	{ "tx-128-255-byte-packets" },
+	{ "tx-256-511-byte-packets" },
+	{ "tx-512-1023-byte-packets" },
+	{ "tx-1024-1518-byte-packets" },
+};
+
+static int
+pasemi_mac_ethtool_get_settings(struct net_device *netdev,
+			       struct ethtool_cmd *cmd)
+{
+	struct pasemi_mac *mac = netdev_priv(netdev);
+	struct phy_device *phydev = mac->phydev;
+
+	return phy_ethtool_gset(phydev, cmd);
+}
+
+static void
+pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
+			       struct ethtool_drvinfo *drvinfo)
+{
+	struct pasemi_mac *mac;
+	mac = netdev_priv(netdev);
+
+	/* clear and fill out info */
+	memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
+	strncpy(drvinfo->driver, "pasemi_mac", 12);
+	strcpy(drvinfo->version, "N/A");
+	strcpy(drvinfo->fw_version, "N/A");
+	strncpy(drvinfo->bus_info, pci_name(mac->pdev), 32);
+}
+
+static u32
+pasemi_mac_ethtool_get_msglevel(struct net_device *netdev)
+{
+	struct pasemi_mac *mac = netdev_priv(netdev);
+	return mac->msg_enable;
+}
+
+static void
+pasemi_mac_ethtool_set_msglevel(struct net_device *netdev,
+				u32 level)
+{
+	struct pasemi_mac *mac = netdev_priv(netdev);
+	mac->msg_enable = level;
+}
+
+
+static void
+pasemi_mac_ethtool_get_ringparam(struct net_device *netdev,
+				 struct ethtool_ringparam *ering)
+{
+	struct pasemi_mac *mac = netdev->priv;
+
+	ering->tx_max_pending = TX_RING_SIZE/2;
+	ering->tx_pending = RING_USED(mac->tx)/2;
+	ering->rx_max_pending = RX_RING_SIZE/4;
+	ering->rx_pending = RING_USED(mac->rx)/4;
+}
+
+static int pasemi_mac_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(ethtool_stats_keys);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void pasemi_mac_get_ethtool_stats(struct net_device *netdev,
+		struct ethtool_stats *stats, u64 *data)
+{
+	struct pasemi_mac *mac = netdev->priv;
+	int i;
+
+	data[0] = pasemi_read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if))
+			>> PAS_DMA_RXINT_RCMDSTA_DROPS_S;
+	for (i = 0; i < 32; i++)
+		data[1+i] = pasemi_read_mac_reg(mac->dma_if, PAS_MAC_RMON(i));
+}
+
+static void pasemi_mac_get_strings(struct net_device *netdev, u32 stringset,
+				   u8 *data)
+{
+	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+const struct ethtool_ops pasemi_mac_ethtool_ops = {
+	.get_settings		= pasemi_mac_ethtool_get_settings,
+	.get_drvinfo		= pasemi_mac_ethtool_get_drvinfo,
+	.get_msglevel		= pasemi_mac_ethtool_get_msglevel,
+	.set_msglevel		= pasemi_mac_ethtool_set_msglevel,
+	.get_link		= ethtool_op_get_link,
+	.get_ringparam          = pasemi_mac_ethtool_get_ringparam,
+	.get_strings		= pasemi_mac_get_strings,
+	.get_sset_count		= pasemi_mac_get_sset_count,
+	.get_ethtool_stats	= pasemi_mac_get_ethtool_stats,
+};
+
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 7eb6e7e..e365efb 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1266,6 +1266,85 @@
 	return 0;
 }
 
+static void gelic_net_get_wol(struct net_device *netdev,
+			      struct ethtool_wolinfo *wol)
+{
+	if (0 <= ps3_compare_firmware_version(2, 2, 0))
+		wol->supported = WAKE_MAGIC;
+	else
+		wol->supported = 0;
+
+	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+static int gelic_net_set_wol(struct net_device *netdev,
+			     struct ethtool_wolinfo *wol)
+{
+	int status;
+	struct gelic_card *card;
+	u64 v1, v2;
+
+	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
+	    !capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	card = netdev_card(netdev);
+	if (wol->wolopts & WAKE_MAGIC) {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_MAGIC_PACKET,
+					 0, GELIC_LV1_WOL_MP_ENABLE,
+					 &v1, &v2);
+		if (status) {
+			pr_info("%s: enabling WOL failed %d\n", __func__,
+				status);
+			status = -EIO;
+			goto done;
+		}
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
+					 0, GELIC_LV1_WOL_MATCH_ALL,
+					 &v1, &v2);
+		if (!status)
+			ps3_sys_manager_set_wol(1);
+		else {
+			pr_info("%s: enabling WOL filter failed %d\n",
+				__func__, status);
+			status = -EIO;
+		}
+	} else {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_MAGIC_PACKET,
+					 0, GELIC_LV1_WOL_MP_DISABLE,
+					 &v1, &v2);
+		if (status) {
+			pr_info("%s: disabling WOL failed %d\n", __func__,
+				status);
+			status = -EIO;
+			goto done;
+		}
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					 GELIC_LV1_SET_WOL,
+					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
+					 0, GELIC_LV1_WOL_MATCH_ALL,
+					 &v1, &v2);
+		if (!status)
+			ps3_sys_manager_set_wol(0);
+		else {
+			pr_info("%s: removing WOL filter failed %d\n",
+				__func__, status);
+			status = -EIO;
+		}
+	}
+done:
+	return status;
+}
+
 static struct ethtool_ops gelic_ether_ethtool_ops = {
 	.get_drvinfo	= gelic_net_get_drvinfo,
 	.get_settings	= gelic_ether_get_settings,
@@ -1274,6 +1353,8 @@
 	.set_tx_csum	= ethtool_op_set_tx_csum,
 	.get_rx_csum	= gelic_net_get_rx_csum,
 	.set_rx_csum	= gelic_net_set_rx_csum,
+	.get_wol	= gelic_net_get_wol,
+	.set_wol	= gelic_net_set_wol,
 };
 
 /**
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 1d39d06..520f143 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -182,12 +182,32 @@
 	GELIC_LV1_GET_ETH_PORT_STATUS	= 2,
 	GELIC_LV1_SET_NEGOTIATION_MODE	= 3,
 	GELIC_LV1_GET_VLAN_ID		= 4,
+	GELIC_LV1_SET_WOL		= 5,
 	GELIC_LV1_GET_CHANNEL           = 6,
 	GELIC_LV1_POST_WLAN_CMD		= 9,
 	GELIC_LV1_GET_WLAN_CMD_RESULT	= 10,
 	GELIC_LV1_GET_WLAN_EVENT	= 11
 };
 
+/* for GELIC_LV1_SET_WOL */
+enum gelic_lv1_wol_command {
+	GELIC_LV1_WOL_MAGIC_PACKET	= 1,
+	GELIC_LV1_WOL_ADD_MATCH_ADDR	= 6,
+	GELIC_LV1_WOL_DELETE_MATCH_ADDR	= 7,
+};
+
+/* for GELIC_LV1_WOL_MAGIC_PACKET */
+enum gelic_lv1_wol_mp_arg {
+	GELIC_LV1_WOL_MP_DISABLE	= 0,
+	GELIC_LV1_WOL_MP_ENABLE		= 1,
+};
+
+/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
+enum gelic_lv1_wol_match_arg {
+	GELIC_LV1_WOL_MATCH_INDIVIDUAL	= 0,
+	GELIC_LV1_WOL_MATCH_ALL		= 1,
+};
+
 /* status returened from GET_ETH_PORT_STATUS */
 enum gelic_lv1_ether_port_status {
 	GELIC_LV1_ETHER_LINK_UP		= 0x0000000000000001L,
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 80c9dec..9bd7c4a 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -117,6 +117,32 @@
 EXPORT_SYMBOL(of_device_is_compatible);
 
 /**
+ *  of_device_is_available - check if a device is available for use
+ *
+ *  @device: Node to check for availability
+ *
+ *  Returns 1 if the status property is absent or set to "okay" or "ok",
+ *  0 otherwise
+ */
+int of_device_is_available(const struct device_node *device)
+{
+	const char *status;
+	int statlen;
+
+	status = of_get_property(device, "status", &statlen);
+	if (status == NULL)
+		return 1;
+
+	if (statlen > 0) {
+		if (!strcmp(status, "okay") || !strcmp(status, "ok"))
+			return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(of_device_is_available);
+
+/**
  *	of_get_parent - Get a node's parent if any
  *	@node:	Node to get parent
  *
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d4f6f96..7605453 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -24,6 +24,7 @@
 #include <linux/reboot.h>
 
 #include <asm/firmware.h>
+#include <asm/lv1call.h>
 #include <asm/ps3.h>
 
 #include "vuart.h"
@@ -187,6 +188,7 @@
  * controller, and bluetooth controller.
  * @PS3_SM_WAKE_RTC:
  * @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
  * @PS3_SM_WAKE_P_O_R: Power on reset.
  *
  * Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
@@ -200,10 +202,19 @@
 	PS3_SM_WAKE_DEFAULT   = 0,
 	PS3_SM_WAKE_RTC       = 0x00000040,
 	PS3_SM_WAKE_RTC_ERROR = 0x00000080,
+	PS3_SM_WAKE_W_O_L     = 0x00000400,
 	PS3_SM_WAKE_P_O_R     = 0x80000000,
 };
 
 /**
+ * user_wake_sources - User specified wakeup sources.
+ *
+ * Logical OR of enum ps3_sys_manager_wake_source types.
+ */
+
+static u32 user_wake_sources = PS3_SM_WAKE_DEFAULT;
+
+/**
  * enum ps3_sys_manager_cmd - Command from system manager to guest.
  *
  * The guest completes the actions needed, then acks or naks the command via
@@ -581,6 +592,23 @@
 	return -EIO;
 }
 
+static void ps3_sys_manager_fin(struct ps3_system_bus_device *dev)
+{
+	ps3_sys_manager_send_request_shutdown(dev);
+
+	pr_emerg("System Halted, OK to turn off power\n");
+
+	while (ps3_sys_manager_handle_msg(dev)) {
+		/* pause until next DEC interrupt */
+		lv1_pause(0);
+	}
+
+	while (1) {
+		/* pause, ignoring DEC interrupt */
+		lv1_pause(1);
+	}
+}
+
 /**
  * ps3_sys_manager_final_power_off - The final platform machine_power_off routine.
  *
@@ -601,13 +629,9 @@
 	ps3_vuart_cancel_async(dev);
 
 	ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
-		PS3_SM_WAKE_DEFAULT);
-	ps3_sys_manager_send_request_shutdown(dev);
+		user_wake_sources);
 
-	pr_emerg("System Halted, OK to turn off power\n");
-
-	while (1)
-		ps3_sys_manager_handle_msg(dev);
+	ps3_sys_manager_fin(dev);
 }
 
 /**
@@ -638,16 +662,44 @@
 
 	ps3_sys_manager_send_attr(dev, 0);
 	ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_REBOOT,
-		PS3_SM_WAKE_DEFAULT);
-	ps3_sys_manager_send_request_shutdown(dev);
+		user_wake_sources);
 
-	pr_emerg("System Halted, OK to turn off power\n");
-
-	while (1)
-		ps3_sys_manager_handle_msg(dev);
+	ps3_sys_manager_fin(dev);
 }
 
 /**
+ * ps3_sys_manager_get_wol - Get wake-on-lan setting.
+ */
+
+int ps3_sys_manager_get_wol(void)
+{
+	pr_debug("%s:%d\n", __func__, __LINE__);
+
+	return (user_wake_sources & PS3_SM_WAKE_W_O_L) != 0;
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_get_wol);
+
+/**
+ * ps3_sys_manager_set_wol - Set wake-on-lan setting.
+ */
+
+void ps3_sys_manager_set_wol(int state)
+{
+	static DEFINE_MUTEX(mutex);
+
+	mutex_lock(&mutex);
+
+	pr_debug("%s:%d: %d\n", __func__, __LINE__, state);
+
+	if (state)
+		user_wake_sources |= PS3_SM_WAKE_W_O_L;
+	else
+		user_wake_sources &= ~PS3_SM_WAKE_W_O_L;
+	mutex_unlock(&mutex);
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_set_wol);
+
+/**
  * ps3_sys_manager_work - Asynchronous read handler.
  *
  * Signaled when PS3_SM_RX_MSG_LEN_MIN bytes arrive at the vuart port.
diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c
index 31648f7..4742258 100644
--- a/drivers/ps3/sys-manager-core.c
+++ b/drivers/ps3/sys-manager-core.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/kernel.h>
+#include <asm/lv1call.h>
 #include <asm/ps3.h>
 
 /**
@@ -50,10 +51,7 @@
 	if (ps3_sys_manager_ops.power_off)
 		ps3_sys_manager_ops.power_off(ps3_sys_manager_ops.dev);
 
-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
-	local_irq_disable();
-	while (1)
-		(void)0;
+	ps3_sys_manager_halt();
 }
 
 void ps3_sys_manager_restart(void)
@@ -61,8 +59,14 @@
 	if (ps3_sys_manager_ops.restart)
 		ps3_sys_manager_ops.restart(ps3_sys_manager_ops.dev);
 
-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	ps3_sys_manager_halt();
+}
+
+void ps3_sys_manager_halt(void)
+{
+	pr_emerg("System Halted, OK to turn off power\n");
 	local_irq_disable();
 	while (1)
-		(void)0;
+		lv1_pause(1);
 }
+
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index c0e50a4..8aacfb7 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -56,7 +56,9 @@
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
 		| UPF_FIXED_PORT;
 	port->dev = &ofdev->dev;
-	port->custom_divisor = *clk / (16 * (*spd));
+	/* If current-speed was set, then try not to change it. */
+	if (spd)
+		port->custom_divisor = *clk / (16 * (*spd));
 
 	return 0;
 }
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 5f640e5..7381916 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -1,5 +1,6 @@
 include include/asm-generic/Kbuild.asm
 
+header-y += a.out.h
 header-y += auxvec.h
 header-y += ioctls.h
 header-y += mman.h
@@ -23,7 +24,6 @@
 header-y += statfs.h
 header-y += ps3fb.h
 
-unifdef-y += a.out.h
 unifdef-y += asm-compat.h
 unifdef-y += bootx.h
 unifdef-y += byteorder.h
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
index 4aa2207..98324c5 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/include/asm-powerpc/abs_addr.h
@@ -12,10 +12,11 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/lmb.h>
+
 #include <asm/types.h>
 #include <asm/page.h>
 #include <asm/prom.h>
-#include <asm/lmb.h>
 #include <asm/firmware.h>
 
 struct mschunks_map {
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
index 8485c28..fb11b0c 100644
--- a/include/asm-powerpc/cputhreads.h
+++ b/include/asm-powerpc/cputhreads.h
@@ -35,7 +35,7 @@
 
 	res = CPU_MASK_NONE;
 	for (i = 0; i < NR_CPUS; i += threads_per_core) {
-		cpus_shift_right(tmp, threads_core_mask, i);
+		cpus_shift_left(tmp, threads_core_mask, i);
 		if (cpus_intersects(threads, tmp))
 			cpu_set(i, res);
 	}
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index be6c879..f8398ce 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -82,6 +82,19 @@
 	spin_unlock_irqrestore(&dcr_ind_lock, flags);
 }
 
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+				 unsigned clr, unsigned set)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = (__mfdcr(base_data) & ~clr) | set;
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
 #define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
 					 DCRN_ ## base ## _CONFIG_DATA,	\
 					 reg)
@@ -90,6 +103,10 @@
 					 DCRN_ ## base ## _CONFIG_DATA,	\
 					 reg, data)
 
+#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
+							      DCRN_ ## base ## _CONFIG_DATA,	\
+							      reg, clr, set)
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
index 9f1fb98..29b0ece 100644
--- a/include/asm-powerpc/dcr-regs.h
+++ b/include/asm-powerpc/dcr-regs.h
@@ -68,4 +68,82 @@
 #define SDR0_UART3		0x0123
 #define SDR0_CUST0		0x4000
 
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR	0x00
+#define DCRN_SRAM0_SB1CR	0x01
+#define DCRN_SRAM0_SB2CR	0x02
+#define DCRN_SRAM0_SB3CR	0x03
+#define  SRAM_SBCR_BU_MASK	0x00000180
+#define  SRAM_SBCR_BS_64KB	0x00000800
+#define  SRAM_SBCR_BU_RO	0x00000080
+#define  SRAM_SBCR_BU_RW	0x00000180
+#define DCRN_SRAM0_BEAR		0x04
+#define DCRN_SRAM0_BESR0	0x05
+#define DCRN_SRAM0_BESR1	0x06
+#define DCRN_SRAM0_PMEG		0x07
+#define DCRN_SRAM0_CID		0x08
+#define DCRN_SRAM0_REVID	0x09
+#define DCRN_SRAM0_DPC		0x0a
+#define  SRAM_DPC_ENABLE	0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG		0x00
+#define  L2C_CFG_L2M		0x80000000
+#define  L2C_CFG_ICU		0x40000000
+#define  L2C_CFG_DCU		0x20000000
+#define  L2C_CFG_DCW_MASK	0x1e000000
+#define  L2C_CFG_TPC		0x01000000
+#define  L2C_CFG_CPC		0x00800000
+#define  L2C_CFG_FRAN		0x00200000
+#define  L2C_CFG_SS_MASK	0x00180000
+#define  L2C_CFG_SS_256		0x00000000
+#define  L2C_CFG_CPIM		0x00040000
+#define  L2C_CFG_TPIM		0x00020000
+#define  L2C_CFG_LIM		0x00010000
+#define  L2C_CFG_PMUX_MASK	0x00007000
+#define  L2C_CFG_PMUX_SNP	0x00000000
+#define  L2C_CFG_PMUX_IF	0x00001000
+#define  L2C_CFG_PMUX_DF	0x00002000
+#define  L2C_CFG_PMUX_DS	0x00003000
+#define  L2C_CFG_PMIM		0x00000800
+#define  L2C_CFG_TPEI		0x00000400
+#define  L2C_CFG_CPEI		0x00000200
+#define  L2C_CFG_NAM		0x00000100
+#define  L2C_CFG_SMCM		0x00000080
+#define  L2C_CFG_NBRM		0x00000040
+#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
+#define DCRN_L2C0_CMD		0x01
+#define  L2C_CMD_CLR		0x80000000
+#define  L2C_CMD_DIAG		0x40000000
+#define  L2C_CMD_INV		0x20000000
+#define  L2C_CMD_CCP		0x10000000
+#define  L2C_CMD_CTE		0x08000000
+#define  L2C_CMD_STRC		0x04000000
+#define  L2C_CMD_STPC		0x02000000
+#define  L2C_CMD_RPMC		0x01000000
+#define  L2C_CMD_HCC		0x00800000
+#define DCRN_L2C0_ADDR		0x02
+#define DCRN_L2C0_DATA		0x03
+#define DCRN_L2C0_SR		0x04
+#define  L2C_SR_CC		0x80000000
+#define  L2C_SR_CPE		0x40000000
+#define  L2C_SR_TPE		0x20000000
+#define  L2C_SR_LRU		0x10000000
+#define  L2C_SR_PCS		0x08000000
+#define DCRN_L2C0_REVID		0x05
+#define DCRN_L2C0_SNP0		0x06
+#define DCRN_L2C0_SNP1		0x07
+#define  L2C_SNP_BA_MASK	0xffff0000
+#define  L2C_SNP_SSR_MASK	0x0000f000
+#define  L2C_SNP_SSR_32G	0x0000f000
+#define  L2C_SNP_ESR		0x00000800
+
 #endif /* __DCR_REGS_H__ */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
index 5d1dc48..028184b 100644
--- a/include/asm-powerpc/lmb.h
+++ b/include/asm-powerpc/lmb.h
@@ -1,81 +1,15 @@
 #ifndef _ASM_POWERPC_LMB_H
 #define _ASM_POWERPC_LMB_H
-#ifdef __KERNEL__
 
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
+#include <asm/udbg.h>
 
-#include <linux/init.h>
-#include <asm/prom.h>
+#define LMB_DBG(fmt...) udbg_printf(fmt)
 
-#define MAX_LMB_REGIONS 128
+#ifdef CONFIG_PPC32
+extern unsigned long __max_low_memory;
+#define LMB_REAL_LIMIT	__max_low_memory
+#else
+#define LMB_REAL_LIMIT	0
+#endif
 
-struct lmb_property {
-	unsigned long base;
-	unsigned long size;
-};
-
-struct lmb_region {
-	unsigned long cnt;
-	unsigned long size;
-	struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
-	unsigned long debug;
-	unsigned long rmo_size;
-	struct lmb_region memory;
-	struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long __init lmb_add(unsigned long base, unsigned long size);
-extern long __init lmb_reserve(unsigned long base, unsigned long size);
-extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align);
-extern unsigned long __init lmb_alloc_base(unsigned long size,
-		unsigned long align, unsigned long max_addr);
-extern unsigned long __init __lmb_alloc_base(unsigned long size,
-		unsigned long align, unsigned long max_addr);
-extern unsigned long __init lmb_phys_mem_size(void);
-extern unsigned long __init lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
-extern int __init lmb_is_reserved(unsigned long addr);
-
-extern void lmb_dump_all(void);
-
-static inline unsigned long
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].size;
-}
-static inline unsigned long
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_start_pfn(type, region_nr) +
-	       lmb_size_pages(type, region_nr);
-}
-
-#endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 0872ec2..b95386a 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -68,6 +68,8 @@
 				       unsigned long vflags,
 				       int psize, int ssize);
 	long		(*hpte_remove)(unsigned long hpte_group);
+	void            (*hpte_removebolted)(unsigned long ea,
+					     int psize, int ssize);
 	void		(*flush_hash_range)(unsigned long number, int local);
 
 	/* special for kexec, to be called in real mode, linar mapping is
diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h
index b4526ff..19fd793 100644
--- a/include/asm-powerpc/pasemi_dma.h
+++ b/include/asm-powerpc/pasemi_dma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 PA Semi, Inc
+ * Copyright (C) 2006-2008 PA Semi, Inc
  *
  * Hardware register layout and descriptor formats for the on-board
  * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
@@ -40,6 +40,11 @@
 	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
 	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
 	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
+	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
+	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
 };
 
 
@@ -123,11 +128,16 @@
 #define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
 #define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
 #define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
+#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
+#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
 #define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
 #define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
 #define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
 					 PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000001c0
+#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
+#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
+#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
 #define    PAS_DMA_TXCHAN_CFG_WT_S	6
 #define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
 					 PAS_DMA_TXCHAN_CFG_WT_M)
@@ -394,11 +404,62 @@
 				 XCT_COPY_LLEN_M)
 #define XCT_COPY_SE		0x0000000000000001ull
 
+/* Function descriptor fields */
+#define XCT_FUN_T		0x8000000000000000ull
+#define XCT_FUN_ST		0x4000000000000000ull
+#define XCT_FUN_RR_M		0x3000000000000000ull
+#define XCT_FUN_RR_NORES	0x0000000000000000ull
+#define XCT_FUN_RR_8BRES	0x1000000000000000ull
+#define XCT_FUN_RR_24BRES	0x2000000000000000ull
+#define XCT_FUN_RR_40BRES	0x3000000000000000ull
+#define XCT_FUN_I		0x0800000000000000ull
+#define XCT_FUN_O		0x0400000000000000ull
+#define XCT_FUN_E		0x0200000000000000ull
+#define XCT_FUN_FUN_M		0x01c0000000000000ull
+#define XCT_FUN_FUN_S		54
+#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M		0x0038000000000000ull
+#define XCT_FUN_CRM_NOP		0x0000000000000000ull
+#define XCT_FUN_CRM_SIG		0x0008000000000000ull
+#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S		32
+#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M		0x00000000f8000000ull
+#define XCT_FUN_SHL_S		27
+#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M		0x0000000007c00000ull
+#define XCT_FUN_HSZ_M		0x00000000003c0000ull
+#define XCT_FUN_ALG_M		0x0000000000038000ull
+#define XCT_FUN_HP		0x0000000000004000ull
+#define XCT_FUN_BCM_M		0x0000000000003800ull
+#define XCT_FUN_BCP_M		0x0000000000000600ull
+#define XCT_FUN_SIG_M		0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
+#define XCT_FUN_A		0x0000000000000008ull
+#define XCT_FUN_C		0x0000000000000004ull
+#define XCT_FUN_AL2		0x0000000000000002ull
+#define XCT_FUN_SE		0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S	32
+#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S	0
+
 /* Control descriptor fields */
 #define CTRL_CMD_T		0x8000000000000000ull
 #define CTRL_CMD_META_EVT	0x2000000000000000ull
 #define CTRL_CMD_O		0x0400000000000000ull
-#define CTRL_CMD_REG_M		0x000000000000000full
+#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
+#define CTRL_CMD_REG_M		0x000000000000007full
 #define CTRL_CMD_REG_S		0
 #define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
 				 CTRL_CMD_REG_M)
@@ -461,6 +522,16 @@
 extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
 				dma_addr_t *handle);
 
+/* Routines to allocate flags (events) for channel syncronization */
+extern int  pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int  pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
 /* Initialize the library, must be called before any other functions */
 extern int pasemi_dma_init(void);
 
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 2c79f55..bd5b401 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -420,7 +420,8 @@
 #define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
 #define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
 
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES)
 /* We want the debuggers to be able to set breakpoints anywhere, so
  * don't write protect the kernel text */
 #define _PAGE_RAM_TEXT	_PAGE_RAM
diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h
new file mode 100644
index 0000000..209a989
--- /dev/null
+++ b/include/asm-powerpc/phyp_dump.h
@@ -0,0 +1,45 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END   (1UL<<28)
+
+struct phyp_dump {
+	/* Memory that is reserved during very early boot. */
+	unsigned long init_reserve_start;
+	unsigned long init_reserve_size;
+	/* Check status during boot if dump supported, active & present*/
+	unsigned long phyp_dump_at_boot;
+	unsigned long phyp_dump_configured;
+	unsigned long phyp_dump_is_active;
+	/* store cpu & hpte size */
+	unsigned long cpu_state_size;
+	unsigned long hpte_region_size;
+	/* previous scratch area values */
+	unsigned long reserved_scratch_addr;
+	unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h
new file mode 100644
index 0000000..033039a
--- /dev/null
+++ b/include/asm-powerpc/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 2b69367..9e8ed68 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -434,8 +434,11 @@
 };
 
 void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void ps3_sys_manager_power_off(void);
-void ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
 
 struct ps3_prealloc {
     const char *name;
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
index e8b493d..9aea8e9 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/include/asm-powerpc/sparsemem.h
@@ -15,6 +15,7 @@
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
 #ifdef CONFIG_NUMA
 extern int hot_add_scn_to_nid(unsigned long scn_addr);
 #else
diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h
index aa40f92..e40010a 100644
--- a/include/asm-powerpc/string.h
+++ b/include/asm-powerpc/string.h
@@ -7,6 +7,7 @@
 #define __HAVE_ARCH_STRNCPY
 #define __HAVE_ARCH_STRLEN
 #define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
 #define __HAVE_ARCH_STRCAT
 #define __HAVE_ARCH_MEMSET
 #define __HAVE_ARCH_MEMCPY
@@ -18,6 +19,7 @@
 extern char * strncpy(char *,const char *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
 extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
 extern char * strcat(char *, const char *);
 extern void * memset(void *,int,__kernel_size_t);
 extern void * memcpy(void *,const void *,__kernel_size_t);
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
new file mode 100644
index 0000000..6a352cb
--- /dev/null
+++ b/include/asm-sparc64/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
new file mode 100644
index 0000000..632717c
--- /dev/null
+++ b/include/linux/lmb.h
@@ -0,0 +1,83 @@
+#ifndef _LINUX_LMB_H
+#define _LINUX_LMB_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_LMB_REGIONS 128
+
+struct lmb_property {
+	u64 base;
+	u64 size;
+};
+
+struct lmb_region {
+	unsigned long cnt;
+	u64 size;
+	struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+	unsigned long debug;
+	u64 rmo_size;
+	struct lmb_region memory;
+	struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(u64 base, u64 size);
+extern long __init lmb_reserve(u64 base, u64 size);
+extern u64 __init lmb_alloc(u64 size, u64 align);
+extern u64 __init lmb_alloc_base(u64 size,
+		u64, u64 max_addr);
+extern u64 __init __lmb_alloc_base(u64 size,
+		u64 align, u64 max_addr);
+extern u64 __init lmb_phys_mem_size(void);
+extern u64 __init lmb_end_of_DRAM(void);
+extern void __init lmb_enforce_memory_limit(u64 memory_limit);
+extern int __init lmb_is_reserved(u64 addr);
+
+extern void lmb_dump_all(void);
+
+static inline u64
+lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].size;
+}
+static inline u64
+lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+{
+	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+	return lmb_start_pfn(type, region_nr) +
+	       lmb_size_pages(type, region_nr);
+}
+
+#include <asm/lmb.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_LMB_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 6981016..59a61bd 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -62,6 +62,7 @@
 					 int *lenp);
 extern int of_device_is_compatible(const struct device_node *device,
 				   const char *);
+extern int of_device_is_available(const struct device_node *device);
 extern const void *of_get_property(const struct device_node *node,
 				const char *name,
 				int *lenp);
diff --git a/lib/Kconfig b/lib/Kconfig
index ba3d104..2d53dc0 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -141,4 +141,7 @@
 config CHECK_SIGNATURE
 	bool
 
+config HAVE_LMB
+	boolean
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 23de261..61bba16 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -70,6 +70,8 @@
 
 lib-$(CONFIG_GENERIC_BUG) += bug.o
 
+obj-$(CONFIG_HAVE_LMB) += lmb.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/arch/powerpc/mm/lmb.c b/lib/lmb.c
similarity index 67%
rename from arch/powerpc/mm/lmb.c
rename to lib/lmb.c
index 4ce23bc..3c43b95fe 100644
--- a/arch/powerpc/mm/lmb.c
+++ b/lib/lmb.c
@@ -3,7 +3,7 @@
  *
  * Peter Bergner, IBM Corp.	June 2001.
  * Copyright (C) 2001 Peter Bergner.
- * 
+ *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
@@ -13,19 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#ifdef CONFIG_PPC32
-#include "mmu_decl.h"		/* for __max_low_memory */
-#endif
+#include <linux/lmb.h>
 
 #undef DEBUG
 
 #ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) LMB_DBG(fmt)
 #else
 #define DBG(fmt...)
 #endif
@@ -41,33 +34,34 @@
 
 	DBG("lmb_dump_all:\n");
 	DBG("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
-	DBG("    memory.size		  = 0x%lx\n", lmb.memory.size);
+	DBG("    memory.size		  = 0x%llx\n",
+	    (unsigned long long)lmb.memory.size);
 	for (i=0; i < lmb.memory.cnt ;i++) {
-		DBG("    memory.region[0x%x].base       = 0x%lx\n",
-			    i, lmb.memory.region[i].base);
-		DBG("		      .size     = 0x%lx\n",
-			    lmb.memory.region[i].size);
+		DBG("    memory.region[0x%x].base       = 0x%llx\n",
+		    i, (unsigned long long)lmb.memory.region[i].base);
+		DBG("		      .size     = 0x%llx\n",
+		    (unsigned long long)lmb.memory.region[i].size);
 	}
 
 	DBG("\n    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
 	DBG("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
 	for (i=0; i < lmb.reserved.cnt ;i++) {
-		DBG("    reserved.region[0x%x].base       = 0x%lx\n",
-			    i, lmb.reserved.region[i].base);
-		DBG("		      .size     = 0x%lx\n",
-			    lmb.reserved.region[i].size);
+		DBG("    reserved.region[0x%x].base       = 0x%llx\n",
+		    i, (unsigned long long)lmb.reserved.region[i].base);
+		DBG("		      .size     = 0x%llx\n",
+		    (unsigned long long)lmb.reserved.region[i].size);
 	}
 #endif /* DEBUG */
 }
 
-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
-		unsigned long size1, unsigned long base2, unsigned long size2)
+static unsigned long __init lmb_addrs_overlap(u64 base1,
+		u64 size1, u64 base2, u64 size2)
 {
 	return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
 }
 
-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
-		unsigned long base2, unsigned long size2)
+static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
+		u64 base2, u64 size2)
 {
 	if (base2 == base1 + size1)
 		return 1;
@@ -80,10 +74,10 @@
 static long __init lmb_regions_adjacent(struct lmb_region *rgn,
 		unsigned long r1, unsigned long r2)
 {
-	unsigned long base1 = rgn->region[r1].base;
-	unsigned long size1 = rgn->region[r1].size;
-	unsigned long base2 = rgn->region[r2].base;
-	unsigned long size2 = rgn->region[r2].size;
+	u64 base1 = rgn->region[r1].base;
+	u64 size1 = rgn->region[r1].size;
+	u64 base2 = rgn->region[r2].base;
+	u64 size2 = rgn->region[r2].size;
 
 	return lmb_addrs_adjacent(base1, size1, base2, size2);
 }
@@ -135,16 +129,21 @@
 }
 
 /* This routine called with relocation disabled. */
-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
-				  unsigned long size)
+static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
 {
 	unsigned long coalesced = 0;
 	long adjacent, i;
 
+	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+		return 0;
+	}
+
 	/* First try and coalesce this LMB with another. */
 	for (i=0; i < rgn->cnt; i++) {
-		unsigned long rgnbase = rgn->region[i].base;
-		unsigned long rgnsize = rgn->region[i].size;
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
 
 		if ((rgnbase == base) && (rgnsize == size))
 			/* Already have this region, so we're done */
@@ -185,13 +184,18 @@
 			break;
 		}
 	}
+
+	if (base < rgn->region[0].base) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+	}
 	rgn->cnt++;
 
 	return 0;
 }
 
 /* This routine may be called with relocation disabled. */
-long __init lmb_add(unsigned long base, unsigned long size)
+long __init lmb_add(u64 base, u64 size)
 {
 	struct lmb_region *_rgn = &(lmb.memory);
 
@@ -203,7 +207,7 @@
 
 }
 
-long __init lmb_reserve(unsigned long base, unsigned long size)
+long __init lmb_reserve(u64 base, u64 size)
 {
 	struct lmb_region *_rgn = &(lmb.reserved);
 
@@ -212,14 +216,14 @@
 	return lmb_add_region(_rgn, base, size);
 }
 
-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
-				unsigned long size)
+long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base,
+				u64 size)
 {
 	unsigned long i;
 
 	for (i=0; i < rgn->cnt; i++) {
-		unsigned long rgnbase = rgn->region[i].base;
-		unsigned long rgnsize = rgn->region[i].size;
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
 		if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
 			break;
 		}
@@ -228,54 +232,61 @@
 	return (i < rgn->cnt) ? i : -1;
 }
 
-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
+u64 __init lmb_alloc(u64 size, u64 align)
 {
 	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
 }
 
-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
-				    unsigned long max_addr)
+u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
 {
-	unsigned long alloc;
+	u64 alloc;
 
 	alloc = __lmb_alloc_base(size, align, max_addr);
 
 	if (alloc == 0)
-		panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
-				size, max_addr);
+		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+		      (unsigned long long) size, (unsigned long long) max_addr);
 
 	return alloc;
 }
 
-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
-				    unsigned long max_addr)
+static u64 lmb_align_down(u64 addr, u64 size)
+{
+	return addr & ~(size - 1);
+}
+
+static u64 lmb_align_up(u64 addr, u64 size)
+{
+	return (addr + (size - 1)) & ~(size - 1);
+}
+
+u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
 {
 	long i, j;
-	unsigned long base = 0;
+	u64 base = 0;
 
 	BUG_ON(0 == size);
 
-#ifdef CONFIG_PPC32
-	/* On 32-bit, make sure we allocate lowmem */
+	/* On some platforms, make sure we allocate lowmem */
 	if (max_addr == LMB_ALLOC_ANYWHERE)
-		max_addr = __max_low_memory;
-#endif
+		max_addr = LMB_REAL_LIMIT;
+
 	for (i = lmb.memory.cnt-1; i >= 0; i--) {
-		unsigned long lmbbase = lmb.memory.region[i].base;
-		unsigned long lmbsize = lmb.memory.region[i].size;
+		u64 lmbbase = lmb.memory.region[i].base;
+		u64 lmbsize = lmb.memory.region[i].size;
 
 		if (max_addr == LMB_ALLOC_ANYWHERE)
-			base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
+			base = lmb_align_down(lmbbase + lmbsize - size, align);
 		else if (lmbbase < max_addr) {
 			base = min(lmbbase + lmbsize, max_addr);
-			base = _ALIGN_DOWN(base - size, align);
+			base = lmb_align_down(base - size, align);
 		} else
 			continue;
 
 		while ((lmbbase <= base) &&
 		       ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
-			base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
-					   align);
+			base = lmb_align_down(lmb.reserved.region[j].base - size,
+					      align);
 
 		if ((base != 0) && (lmbbase <= base))
 			break;
@@ -284,18 +295,19 @@
 	if (i < 0)
 		return 0;
 
-	lmb_add_region(&lmb.reserved, base, size);
+	if (lmb_add_region(&lmb.reserved, base, lmb_align_up(size, align)) < 0)
+		return 0;
 
 	return base;
 }
 
 /* You must call lmb_analyze() before this. */
-unsigned long __init lmb_phys_mem_size(void)
+u64 __init lmb_phys_mem_size(void)
 {
 	return lmb.memory.size;
 }
 
-unsigned long __init lmb_end_of_DRAM(void)
+u64 __init lmb_end_of_DRAM(void)
 {
 	int idx = lmb.memory.cnt - 1;
 
@@ -303,9 +315,10 @@
 }
 
 /* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
+void __init lmb_enforce_memory_limit(u64 memory_limit)
 {
-	unsigned long i, limit;
+	unsigned long i;
+	u64 limit;
 	struct lmb_property *p;
 
 	if (! memory_limit)
@@ -343,13 +356,13 @@
 	}
 }
 
-int __init lmb_is_reserved(unsigned long addr)
+int __init lmb_is_reserved(u64 addr)
 {
 	int i;
 
 	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long upper = lmb.reserved.region[i].base +
-				      lmb.reserved.region[i].size - 1;
+		u64 upper = lmb.reserved.region[i].base +
+			lmb.reserved.region[i].size - 1;
 		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
 			return 1;
 	}