USB: kobil_sct: Rework driver
No hardware but this driver is currently totally broken so we can't make
it much worse. Remove all tbe broken invalid termios handling and replace
it with a proper set_termios method.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 02a86db..6f22419 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -82,6 +82,7 @@
unsigned int set, unsigned int clear);
static void kobil_read_int_callback( struct urb *urb );
static void kobil_write_callback( struct urb *purb );
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
static struct usb_device_id id_table [] = {
@@ -119,6 +120,7 @@
.attach = kobil_startup,
.shutdown = kobil_shutdown,
.ioctl = kobil_ioctl,
+ .set_termios = kobil_set_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -137,7 +139,6 @@
int cur_pos; // index of the next char to send in buf
__u16 device_type;
int line_state;
- struct ktermios internal_termios;
};
@@ -216,7 +217,7 @@
static int kobil_open (struct usb_serial_port *port, struct file *filp)
{
- int i, result = 0;
+ int result = 0;
struct kobil_private *priv;
unsigned char *transfer_buffer;
int transfer_buffer_length = 8;
@@ -242,16 +243,6 @@
port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
- // set up internal termios structure
- priv->internal_termios.c_iflag = port->tty->termios->c_iflag;
- priv->internal_termios.c_oflag = port->tty->termios->c_oflag;
- priv->internal_termios.c_cflag = port->tty->termios->c_cflag;
- priv->internal_termios.c_lflag = port->tty->termios->c_lflag;
-
- for (i=0; i<NCCS; i++) {
- priv->internal_termios.c_cc[i] = port->tty->termios->c_cc[i];
- }
-
// allocate memory for transfer buffer
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (! transfer_buffer) {
@@ -607,102 +598,79 @@
return (result < 0) ? result : 0;
}
-
-static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
{
struct kobil_private * priv;
int result;
unsigned short urb_val = 0;
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
- char *settings;
- void __user *user_arg = (void __user *)arg;
+ int c_cflag = port->tty->termios->c_cflag;
+ speed_t speed;
+ void * settings;
priv = usb_get_serial_port_data(port);
- if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
// This device doesn't support ioctl calls
- return 0;
- }
+ return;
- switch (cmd) {
- case TCGETS: // 0x5401
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
- &priv->internal_termios))
- return -EFAULT;
- return 0;
-
- case TCSETS: // 0x5402
- if (!(port->tty->termios)) {
- dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
- return -ENOTTY;
- }
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (user_termios_to_kernel_termios(&priv->internal_termios,
- (struct ktermios __user *)arg))
- return -EFAULT;
-
- settings = kzalloc(50, GFP_KERNEL);
- if (! settings) {
- return -ENOBUFS;
- }
-
- switch (priv->internal_termios.c_cflag & CBAUD) {
- case B1200:
+ switch (speed = tty_get_baud_rate(port->tty)) {
+ case 1200:
urb_val = SUSBCR_SBR_1200;
- strcat(settings, "1200 ");
break;
- case B9600:
+ case 9600:
default:
urb_val = SUSBCR_SBR_9600;
- strcat(settings, "9600 ");
break;
- }
+ }
+ urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
- urb_val |= (priv->internal_termios.c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
- strcat(settings, (priv->internal_termios.c_cflag & CSTOPB) ? "2 StopBits " : "1 StopBit ");
+ settings = kzalloc(50, GFP_KERNEL);
+ if (! settings)
+ return;
- if (priv->internal_termios.c_cflag & PARENB) {
- if (priv->internal_termios.c_cflag & PARODD) {
- urb_val |= SUSBCR_SPASB_OddParity;
- strcat(settings, "Odd Parity");
- } else {
- urb_val |= SUSBCR_SPASB_EvenParity;
- strcat(settings, "Even Parity");
- }
+ sprintf(settings, "%d ", speed);
+
+ if (c_cflag & PARENB) {
+ if (c_cflag & PARODD) {
+ urb_val |= SUSBCR_SPASB_OddParity;
+ strcat(settings, "Odd Parity");
} else {
- urb_val |= SUSBCR_SPASB_NoParity;
- strcat(settings, "No Parity");
+ urb_val |= SUSBCR_SPASB_EvenParity;
+ strcat(settings, "Even Parity");
}
- dbg("%s - port %d setting port to: %s", __FUNCTION__, port->number, settings );
+ } else {
+ urb_val |= SUSBCR_SPASB_NoParity;
+ strcat(settings, "No Parity");
+ }
- result = usb_control_msg( port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0 ),
- SUSBCRequest_SetBaudRateParityAndStopBits,
- USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
- urb_val,
- 0,
- settings,
- 0,
- KOBIL_TIMEOUT
- );
+ result = usb_control_msg( port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0 ),
+ SUSBCRequest_SetBaudRateParityAndStopBits,
+ USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ urb_val,
+ 0,
+ settings,
+ 0,
+ KOBIL_TIMEOUT
+ );
+ kfree(settings);
+}
- dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
- kfree(settings);
+static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ struct kobil_private * priv = usb_get_serial_port_data(port);
+ unsigned char *transfer_buffer;
+ int transfer_buffer_length = 8;
+ int result;
+
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+ // This device doesn't support ioctl calls
return 0;
+ switch (cmd) {
case TCFLSH: // 0x540B
transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
- if (! transfer_buffer) {
+ if (! transfer_buffer)
return -ENOBUFS;
- }
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
@@ -716,15 +684,13 @@
);
dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
-
kfree(transfer_buffer);
- return ((result < 0) ? -EFAULT : 0);
-
+ return (result < 0) ? -EFAULT : 0;
+ default:
+ return -ENOIOCTLCMD;
}
- return -ENOIOCTLCMD;
}
-
static int __init kobil_init (void)
{
int retval;
