* Mediatek MIPI-CSI2 receiver camsv

Mediatek MIPI-CSI2 receiver camsv transfer data to DRAM in Mediatek SoCs

These node are refer by mipicsi

Required properties:
- reg : physical base address of the mipicsi receiver registers and length of
  memory mapped region.
- clocks: device clocks, see
  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- interrupts : interrupt number to the interrupt controller.

Example:
	seninf1_mux_camsv0: seninf_mux_camsv@15002100 {
		reg = <0 0x15002120 0 0x40>,
		      <0 0x15004000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_LOW>;
	};

	seninf2_mux_camsv1: seninf_mux_camsv@15002500 {
		reg = <0 0x15002520 0 0x40>,
		      <0 0x15005000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV_EN>;
		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>;
	};

	seninf3_mux_camsv2: seninf_mux_camsv@15002900 {
		reg = <0 0x15002920 0 0x40>,
		      <0 0x15006000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
		interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_LOW>;
	};

	seninf4_mux_camsv3: seninf_mux_camsv@15002D00 {
		reg = <0 0x15002D20 0 0x40>,
		      <0 0x15007000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV1_EN>;
		interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_LOW>;
	};

	seninf5_mux_camsv4: seninf_mux_camsv@15003100 {
		reg = <0 0x15003120 0 0x40>,
		      <0 0x15008000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
		interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_LOW>;
	};

	seninf6_mux_camsv5: seninf_mux_camsv@15003500 {
		reg = <0 0x15003520 0 0x40>,
		      <0 0x15009000 0 0x1000>;
		clocks = <&imgsys CLK_IMG_CAM_SV2_EN>;
		interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_LOW>;
	};