diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 2f70428..aeb3af5 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -24,6 +24,7 @@
 CONFIG_MACH_NETSPACE_V2=y
 CONFIG_MACH_INETSPACE_V2=y
 CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_D2NET_V2=y
 CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
 CONFIG_MACH_T5325=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 9cba68c..e3c9032 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -110,7 +110,7 @@
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=m
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index c0094d8..c2b9b4b 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -50,6 +50,9 @@
 	}
 }
 
+/* Function pointer to optional machine-specific reinitialization */
+extern void (*kexec_reinit)(void);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* CONFIG_KEXEC */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 8ccea01..7544ce6 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -12,11 +12,25 @@
 #ifndef __ARM_PMU_H__
 #define __ARM_PMU_H__
 
+#include <linux/interrupt.h>
+
 enum arm_pmu_type {
 	ARM_PMU_DEVICE_CPU	= 0,
 	ARM_NUM_PMU_DEVICES,
 };
 
+/*
+ * struct arm_pmu_platdata - ARM PMU platform data
+ *
+ * @handle_irq: an optional handler which will be called from the interrupt and
+ * passed the address of the low level handler, and can be used to implement
+ * any platform specific handling before or after calling it.
+ */
+struct arm_pmu_platdata {
+	irqreturn_t (*handle_irq)(int irq, void *dev,
+				  irq_handler_t pmu_handler);
+};
+
 #ifdef CONFIG_CPU_HAS_PMU
 
 /**
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 30ead13..e59bbd4 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -75,6 +75,11 @@
 	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
 
+/*
+ * Function pointer to optional machine-specific reinitialization
+ */
+void (*kexec_reinit)(void);
+
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list;
@@ -104,6 +109,8 @@
 			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
+	if (kexec_reinit)
+		kexec_reinit();
 	local_irq_disable();
 	local_fiq_disable();
 	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index d150ad1..22e194eb 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -377,9 +377,18 @@
 	return 0;
 }
 
+static irqreturn_t armpmu_platform_irq(int irq, void *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+
+	return plat->handle_irq(irq, dev, armpmu->handle_irq);
+}
+
 static int
 armpmu_reserve_hardware(void)
 {
+	struct arm_pmu_platdata *plat;
+	irq_handler_t handle_irq;
 	int i, err = -ENODEV, irq;
 
 	pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
@@ -390,6 +399,12 @@
 
 	init_pmu(ARM_PMU_DEVICE_CPU);
 
+	plat = dev_get_platdata(&pmu_device->dev);
+	if (plat && plat->handle_irq)
+		handle_irq = armpmu_platform_irq;
+	else
+		handle_irq = armpmu->handle_irq;
+
 	if (pmu_device->num_resources < 1) {
 		pr_err("no irqs for PMUs defined\n");
 		return -ENODEV;
@@ -400,7 +415,7 @@
 		if (irq < 0)
 			continue;
 
-		err = request_irq(irq, armpmu->handle_irq,
+		err = request_irq(irq, handle_irq,
 				  IRQF_DISABLED | IRQF_NOBALANCING,
 				  "armpmu", NULL);
 		if (err) {
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 96e0e94..03e11f9 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -90,6 +90,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
 MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index fe627ab..e06a88f 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -532,6 +532,11 @@
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+void __init dove_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
 static int get_tclk(void)
 {
 	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
@@ -540,7 +545,8 @@
 
 static void dove_timer_init(void)
 {
-	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_DOVE_BRIDGE, get_tclk());
 }
 
 struct sys_timer dove_timer = {
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index a51517c..6a2046e 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -22,6 +22,7 @@
  */
 void dove_map_io(void);
 void dove_init(void);
+void dove_init_early(void);
 void dove_init_irq(void);
 void dove_setup_cpu_mbus(void);
 void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 95925aa..2ac34ec 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -97,6 +97,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
+	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
 MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 214a4c3..226949d 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -26,10 +26,6 @@
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define  SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index 27b4145..e5fcdd3 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -130,7 +130,8 @@
 #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
 #define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
 #define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
 #define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
 #define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
index 340bb7a..e7e5101 100644
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -6,46 +6,4 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-#include <mach/irqs.h>
 #include <plat/gpio.h>
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-#define GPIO_MAX	72
-
-#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
-#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
-
-#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO :		\
-				 ((pin < 64) ? GPIO_BASE_HI :		\
-				  DOVE_GPIO2_VIRT_BASE))
-
-#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
-#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
-#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
-#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
-#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
-#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
-#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
-#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
-
-static inline int gpio_to_irq(int pin)
-{
-	if (pin < NR_GPIO_IRQS)
-		return pin + IRQ_DOVE_GPIO_START;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_GPIO_START;
-
-	return -EINVAL;
-}
-
-#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
index 4668146..03d401d 100644
--- a/arch/arm/mach-dove/include/mach/irqs.h
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -92,10 +92,5 @@
 
 #define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
 
-/* Required for compatability with PXA AC97 driver.	*/
-#define IRQ_AC97		IRQ_DOVE_AC97
-/* Required for compatability with PXA DMA driver.	*/
-#define IRQ_DMA			IRQ_DOVE_PDMA
-/* Required for compatability with PXA NAND driver 	*/
-#define IRQ_NAND		IRQ_DOVE_NAND
+
 #endif
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 9317f05..101707f 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -99,11 +99,21 @@
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 
 	/*
-	 * Mask and clear GPIO IRQ interrupts.
+	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	writel(0, GPIO_LEVEL_MASK(0));
-	writel(0, GPIO_EDGE_MASK(0));
-	writel(0, GPIO_EDGE_CAUSE(0));
+	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+			IRQ_DOVE_GPIO_START);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+
+	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+			IRQ_DOVE_GPIO_START + 32);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+			IRQ_DOVE_GPIO_START + 64);
 
 	/*
 	 * Mask and clear PMU interrupts
@@ -111,18 +121,6 @@
 	writel(0, PMU_INTERRUPT_MASK);
 	writel(0, PMU_INTERRUPT_CAUSE);
 
-	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		irq_desc[i].status |= IRQ_LEVEL;
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
-	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
-
 	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
 		set_irq_chip(i, &pmu_irq_chip);
 		set_irq_handler(i, handle_level_irq);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56684b5..5eec099 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -100,6 +100,7 @@
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -238,6 +239,7 @@
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -265,6 +267,7 @@
 	bool "LogicPD MX27 LITEKIT platform"
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -300,4 +303,13 @@
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
+config MACH_IMX27IPCAM
+	bool "IMX27 IPCAM platform"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for IMX27 IPCAM platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 77100bf..b85794d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,10 +9,10 @@
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -36,3 +36,4 @@
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
+obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
index 3938a56..dcc4172 100644
--- a/arch/arm/mach-imx/clock-imx1.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -592,6 +592,7 @@
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
 	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index daa0165..a65838f 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -228,6 +228,7 @@
 DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
 DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
 		&esdhc2_ahb_clk);
+DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL,	 NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
@@ -253,6 +254,7 @@
 DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
 DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
 DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2,  6, get_rate_ipg, NULL, &sdma_ahb_clk);
 DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
 		&esdhc1_per_clk);
 DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
@@ -304,6 +306,7 @@
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
 };
 
 int __init mx25_clocks_init(void)
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index 8197948..da59365 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -9,6 +9,10 @@
 #include <mach/mx1.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst;
+#define imx1_add_imx_fb(pdata) \
+    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
+
 extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
 #define imx1_add_imx_i2c(pdata)		\
 	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
@@ -18,3 +22,10 @@
 	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
 #define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
 #define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
+
+extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst;
+#define imx1_add_cspi(id, pdata)   \
+	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
+
+#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
+#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index bde33ca..b591d72 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -81,7 +81,11 @@
 
 extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
 #define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
+
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst;
+#define imx25_add_mxc_pwm(id)	\
+	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index e9f1769..236f149 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -699,7 +699,7 @@
 		local_irq_restore(flags);
 		return -EBUSY;
 	}
-	memset(imxdma, 0, sizeof(imxdma));
+	memset(imxdma, 0, sizeof(*imxdma));
 	imxdma->name = name;
 	local_irq_restore(flags); /* request_irq() can block */
 
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
new file mode 100644
index 0000000..865daf0
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX25_OTG_SIC_SHIFT	29
+#define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT		(1 << 24)
+
+#define MX25_H1_SIC_SHIFT	21
+#define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX25_H1_TLL_BIT		(1 << 5)
+#define MX25_H1_USBTE_BIT	(1 << 4)
+
+int mx25_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
+			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX25_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX25_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX25_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX25_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
new file mode 100644
index 0000000..fa69419
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX27_OTG_SIC_SHIFT	29
+#define MX27_OTG_SIC_MASK	(0x3 << MX27_OTG_SIC_SHIFT)
+#define MX27_OTG_PM_BIT		(1 << 24)
+
+#define MX27_H2_SIC_SHIFT	21
+#define MX27_H2_SIC_MASK	(0x3 << MX27_H2_SIC_SHIFT)
+#define MX27_H2_PM_BIT		(1 << 16)
+#define MX27_H2_DT_BIT		(1 << 5)
+
+#define MX27_H1_SIC_SHIFT	13
+#define MX27_H1_SIC_MASK	(0x3 << MX27_H1_SIC_SHIFT)
+#define MX27_H1_PM_BIT		(1 << 8)
+#define MX27_H1_DT_BIT		(1 << 4)
+
+int mx27_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_OTG_PM_BIT;
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 275c858..fa5288018 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -249,7 +249,7 @@
 
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
-static void ads7846_dev_init(void)
+static void __maybe_unused ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
 		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
@@ -268,7 +268,8 @@
 	.keep_vref_on		= 1,
 };
 
-static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+static struct spi_board_info __maybe_unused
+		eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
 		.bus_num	= 0,
@@ -357,13 +358,11 @@
 	ads7846_dev_init();
 #endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	/* SPI_CS0 init */
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
 	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
 	spi_register_board_info(eukrea_mbimx27_spi_board_info,
 			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-#endif
 
 	/* Leds configuration */
 	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 6cf04da..759299b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -209,17 +209,25 @@
 };
 #endif
 
-#if defined(CONFIG_USB_ULPI)
+static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= eukrea_cpuimx27_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= eukrea_cpuimx27_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -273,21 +281,19 @@
 	platform_device_register(&serial_device);
 #endif
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
+	} else {
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host)
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
@@ -304,9 +310,10 @@
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = eukrea_cpuimx27_init,
-	.timer          = &eukrea_cpuimx27_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &eukrea_cpuimx27_timer,
+	.init_machine = eukrea_cpuimx27_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index eb395ab..9da8d18 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -84,15 +84,25 @@
 	},
 };
 
+static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx25_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= eukrea_cpuimx25_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
@@ -153,9 +163,10 @@
 
 MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params    = MX25_PHYS_OFFSET + 0x100,
-	.map_io         = mx25_map_io,
-	.init_irq       = mx25_init_irq,
-	.init_machine   = eukrea_cpuimx25_init,
-	.timer          = &eukrea_cpuimx25_timer,
+	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.map_io = mx25_map_io,
+	.init_early = imx25_init_early,
+	.init_irq = mx25_init_irq,
+	.timer = &eukrea_cpuimx25_timer,
+	.init_machine = eukrea_cpuimx25_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 40a3666..d7e0d21 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -66,6 +67,11 @@
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
 	/* SDHC1 */
 	PE18_PF_SD1_D0,
 	PE19_PF_SD1_D1,
@@ -204,20 +210,30 @@
 		I2C_BOARD_INFO("pca9555", 0x20),
 		.platform_data = &visstrim_m10_pca9555_pdata,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+	}
 };
 
 /* USB OTG */
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static const struct mxc_usbh_platform_data
 visstrim_m10_usbotg_pdata __initconst = {
 	.init = otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/* SSI */
+static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
+	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
 static void __init visstrim_m10_board_init(void)
@@ -229,6 +245,7 @@
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
+	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
 	i2c_register_board_info(0, visstrim_m10_i2c_devices,
@@ -251,9 +268,10 @@
 };
 
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = visstrim_m10_board_init,
-	.timer          = &visstrim_m10_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &visstrim_m10_timer,
+	.init_machine = visstrim_m10_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
new file mode 100644
index 0000000..9be6cd6
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+
+#include "devices-imx27.h"
+
+static const int mx27ipcam_pins[] __initconst = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static void __init mx27ipcam_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
+		"mx27ipcam");
+
+	imx27_add_imx_uart0(NULL);
+	imx27_add_fec(NULL);
+	imx27_add_imx2_wdt(NULL);
+}
+
+static void __init mx27ipcam_timer_init(void)
+{
+	mx27_clocks_init(25000000);
+}
+
+static struct sys_timer mx27ipcam_timer = {
+	.init	= mx27ipcam_timer_init,
+};
+
+MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &mx27ipcam_timer,
+	.init_machine = mx27ipcam_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 3a1202e..8411405 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -75,9 +75,10 @@
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27lite_init,
-	.timer          = &mx27lite_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &mx27lite_timer,
+	.init_machine = mx27lite_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 1f446e5..47cf56a 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -144,17 +144,19 @@
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.boot_params	= MX1_PHYS_OFFSET + 0x100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &mx1ads_timer,
-	.init_machine	= mx1ads_init,
+	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.map_io = mx1_map_io,
+	.init_early = imx1_init_early,
+	.init_irq = mx1_init_irq,
+	.timer = &mx1ads_timer,
+	.init_machine = mx1ads_init,
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.boot_params	= MX1_PHYS_OFFSET + 0x100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &mx1ads_timer,
-	.init_machine	= mx1ads_init,
+	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.map_io = mx1_map_io,
+	.init_early = imx1_init_early,
+	.init_irq = mx1_init_irq,
+	.timer = &mx1ads_timer,
+	.init_machine = mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 0a37257..fa52a10 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -304,9 +304,10 @@
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX21_PHYS_OFFSET + 0x100,
-	.map_io         = mx21ads_map_io,
-	.init_irq       = mx21_init_irq,
-	.init_machine   = mx21ads_board_init,
-	.timer          = &mx21ads_timer,
+	.boot_params = MX21_PHYS_OFFSET + 0x100,
+	.map_io = mx21ads_map_io,
+	.init_early = imx21_init_early,
+	.init_irq = mx21_init_irq,
+	.timer = &mx21ads_timer,
+	.init_machine = mx21ads_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 8382e79..06da438 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -103,14 +103,18 @@
 	MX25_PAD_SD1_DATA1__SD1_DATA1,
 	MX25_PAD_SD1_DATA2__SD1_DATA2,
 	MX25_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* I2C1 */
+	MX25_PAD_I2C1_CLK__I2C1_CLK,
+	MX25_PAD_I2C1_DAT__I2C1_DAT,
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
 	.phy    = PHY_INTERFACE_MODE_RMII,
 };
 
-#define FEC_ENABLE_GPIO		35
-#define FEC_RESET_B_GPIO	104
+#define FEC_ENABLE_GPIO		IMX_GPIO_NR(2, 3)
+#define FEC_RESET_B_GPIO	IMX_GPIO_NR(4, 8)
 
 static void __init mx25pdk_fec_reset(void)
 {
@@ -185,9 +189,14 @@
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };
 
+static int mx25pdk_usbh2_init(struct platform_device *pdev)
+{
+	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= mx25pdk_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
@@ -195,6 +204,10 @@
 	.phy_mode       = FSL_USB2_PHY_UTMI,
 };
 
+static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -213,6 +226,7 @@
 	imx25_add_imx_keypad(&mx25pdk_keymap_data);
 
 	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
 }
 
 static void __init mx25pdk_timer_init(void)
@@ -226,10 +240,10 @@
 
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX25_PHYS_OFFSET + 0x100,
-	.map_io         = mx25_map_io,
-	.init_irq       = mx25_init_irq,
-	.init_machine   = mx25pdk_init,
-	.timer          = &mx25pdk_timer,
+	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.map_io = mx25_map_io,
+	.init_early = imx25_init_early,
+	.init_irq = mx25_init_irq,
+	.timer = &mx25pdk_timer,
+	.init_machine = mx25pdk_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 1643315..614b3c0 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -98,6 +98,9 @@
 	PD22_PF_CSPI2_SCLK,
 	PD23_PF_CSPI2_MISO,
 	PD24_PF_CSPI2_MOSI,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -159,13 +162,15 @@
 	return 0;
 }
 
-#if defined(CONFIG_USB_ULPI)
+static int mx27_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx27_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -216,7 +221,7 @@
 	.consumer_supplies = vgen_consumers,
 };
 
-static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
+static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
 		.init_data = &vmmc1_init,
@@ -227,10 +232,10 @@
 };
 
 /* MC13783 */
-static struct mc13783_platform_data mc13783_pdata __initdata = {
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.regulators = mx27_3ds_regulators,
 	.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
-	.flags  = MC13783_USE_REGULATOR,
+	.flags  = MC13XXX_USE_REGULATOR,
 };
 
 /* SPI */
@@ -253,6 +258,9 @@
 	},
 };
 
+static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
 
 static void __init mx27pdk_init(void)
 {
@@ -265,14 +273,15 @@
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt(NULL);
 	otg_phy_init();
-#if defined(CONFIG_USB_ULPI)
-	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
-#endif
+
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -282,6 +291,7 @@
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
+	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
 }
 
 static void __init mx27pdk_timer_init(void)
@@ -295,9 +305,10 @@
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27pdk_init,
-	.timer          = &mx27pdk_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &mx27pdk_timer,
+	.init_machine = mx27pdk_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index b832f96..367d1e4 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -344,9 +344,10 @@
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27ads_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27ads_board_init,
-	.timer          = &mx27ads_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27ads_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &mx27ads_timer,
+	.init_machine = mx27ads_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 4ce71b0..69787c3 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -266,10 +266,10 @@
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.boot_params	= MX27_PHYS_OFFSET + 0x100,
-	.map_io		= mx27_map_io,
-	.init_irq	= mx27_init_irq,
-	.init_machine	= mxt_td60_board_init,
-	.timer		= &mxt_td60_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &mxt_td60_timer,
+	.init_machine = mxt_td60_board_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index cccc0a0..63e1825 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -187,7 +187,6 @@
 	}
 };
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_eeprom at25320 = {
 	.name		= "at25320an",
 	.byte_len	= 4096,
@@ -211,7 +210,6 @@
 	.chipselect	= pca100_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
-#endif
 
 static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -269,31 +267,33 @@
 	.exit = pca100_sdhc2_exit,
 };
 
-#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static int usbh2_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -389,36 +389,33 @@
 
 	imx27_add_imx_i2c(1, &pca100_i2c1_data);
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
 	imx27_add_spi_imx0(&pca100_spi0_data);
-#endif
 
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
 	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
 	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
 
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
+	} else {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host) {
-		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
+	if (usbh2_pdata.otg)
+		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	imx27_add_imx_fb(&pca100_fb_data);
 
@@ -437,10 +434,10 @@
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pca100_init,
-	.timer          = &pca100_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.init_machine = pca100_init,
+	.timer = &pca100_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 5056148..38c7708 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -252,7 +252,7 @@
 	.consumer_supplies = cam_consumers,
 };
 
-static struct mc13783_regulator_init_data pcm038_regulators[] = {
+static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
 	{
 		.id = MC13783_REG_VCAM,
 		.init_data = &cam_data,
@@ -262,11 +262,11 @@
 	},
 };
 
-static struct mc13783_platform_data pcm038_pmic = {
+static struct mc13xxx_platform_data pcm038_pmic = {
 	.regulators = pcm038_regulators,
 	.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
-		 MC13783_USE_TOUCHSCREEN,
+	.flags = MC13XXX_USE_ADC | MC13XXX_USE_REGULATOR |
+		 MC13XXX_USE_TOUCHSCREEN,
 };
 
 static struct spi_board_info pcm038_spi_board_info[] __initdata = {
@@ -281,9 +281,15 @@
 	}
 };
 
+static int pcm038_usbh2_init(struct platform_device *pdev)
+{
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.init	= pcm038_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static void __init pcm038_init(void)
@@ -340,9 +346,10 @@
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pcm038_init,
-	.timer          = &pcm038_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.timer = &pcm038_timer,
+	.init_machine = pcm038_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index eae878f..dcaee04 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -145,10 +145,11 @@
 };
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
-    /* Sascha Hauer */
-	.boot_params	= 0x08000100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &scb9328_timer,
-	.init_machine	= scb9328_init,
+	/* Sascha Hauer */
+	.boot_params = 0x08000100,
+	.map_io = mx1_map_io,
+	.init_early = imx1_init_early,
+	.init_irq = mx1_init_irq,
+	.timer = &scb9328_timer,
+	.init_machine = scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 729ae09..2e482ba 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -23,6 +23,9 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
 	imx_map_entry(MX1, IO, MT_DEVICE),
@@ -30,16 +33,26 @@
 
 void __init mx1_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
 
-int imx1_register_gpios(void);
+void __init imx1_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+			MX1_NUM_GPIO_PORT);
+}
+
+static struct mxc_gpio_port imx1_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
+};
 
 void __init mx1_init_irq(void)
 {
 	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-	imx1_register_gpios();
+	mxc_gpio_init(imx1_gpio_ports,	ARRAY_SIZE(imx1_gpio_ports));
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index e728af8..7a0c500 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -24,6 +24,9 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 /* MX21 memory map definition */
 static struct map_desc imx21_io_desc[] __initdata = {
@@ -56,16 +59,28 @@
  */
 void __init mx21_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
-
 	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
 
-int imx21_register_gpios(void);
+void __init imx21_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+	imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
+			MX21_NUM_GPIO_PORT);
+}
+
+static struct mxc_gpio_port imx21_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
+	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
+	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
+	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
+	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
+	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
+};
 
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-	imx21_register_gpios();
+	mxc_gpio_init(imx21_gpio_ports,	ARRAY_SIZE(imx21_gpio_ports));
 }
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 2edec6c..02f7b5c 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -27,6 +27,8 @@
 #include <mach/hardware.h>
 #include <mach/mx25.h>
 #include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
 
 /*
  * This table defines static virtual address mappings for I/O regions.
@@ -45,18 +47,26 @@
  */
 void __init mx25_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX25);
-	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
-
 	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
 }
 
-int imx25_register_gpios(void);
+void __init imx25_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx25_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
+};
 
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-	imx25_register_gpios();
+	mxc_gpio_init(imx25_gpio_ports,	ARRAY_SIZE(imx25_gpio_ports));
 }
 
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 374e48b..a6761a3 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -24,6 +24,9 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+#include <mach/iomux-v1.h>
 
 /* MX27 memory map definition */
 static struct map_desc imx27_io_desc[] __initdata = {
@@ -56,16 +59,28 @@
  */
 void __init mx27_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
-
 	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
-int imx27_register_gpios(void);
+void __init imx27_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
+	imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
+			MX27_NUM_GPIO_PORT);
+}
+
+static struct mxc_gpio_port imx27_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
+	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
+	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
+	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
+	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
+	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
+};
 
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-	imx27_register_gpios();
+	mxc_gpio_init(imx27_gpio_ports,	ARRAY_SIZE(imx27_gpio_ports));
 }
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 3688123..20e71df 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -21,6 +21,7 @@
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
+#include <asm/kexec.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
@@ -846,9 +847,14 @@
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+void __init kirkwood_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
 int kirkwood_tclk;
 
-int __init kirkwood_find_tclk(void)
+static int __init kirkwood_find_tclk(void)
 {
 	u32 dev, rev;
 
@@ -864,7 +870,9 @@
 static void __init kirkwood_timer_init(void)
 {
 	kirkwood_tclk = kirkwood_find_tclk();
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
 }
 
 struct sys_timer kirkwood_timer = {
@@ -1003,6 +1011,10 @@
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
+
+#ifdef CONFIG_KEXEC 
+	kexec_reinit = kirkwood_enable_pcie;
+#endif
 }
 
 static int __init kirkwood_clock_gate(void)
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 95bb0a7..b9b0f09 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -27,11 +27,13 @@
  */
 void kirkwood_map_io(void);
 void kirkwood_init(void);
+void kirkwood_init_early(void);
 void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
 
+void kirkwood_enable_pcie(void);
 void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
 void kirkwood_ehci_init(void);
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index a31c949..043cfd5 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -224,6 +224,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 9ea7118..bff04e0 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -100,6 +100,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 433ea36..f14dfb8 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -105,6 +105,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= dockstar_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 8f47dc0..41d1b40 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -124,6 +124,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index aff0e13..957bd79 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -29,9 +29,6 @@
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
 #define WDT_INT_REQ		0x0008
 
-#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0	0x0002
-#define BRIDGE_INT_TIMER1	0x0004
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
index 81b335e..84f340b 100644
--- a/arch/arm/mach-kirkwood/include/mach/gpio.h
+++ b/arch/arm/mach-kirkwood/include/mach/gpio.h
@@ -6,33 +6,4 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <mach/irqs.h>
 #include <plat/gpio.h>
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-#define GPIO_MAX		50
-#define GPIO_OFF(pin)		(((pin) >> 5) ? 0x0140 : 0x0100)
-#define GPIO_OUT(pin)		(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x00)
-#define GPIO_IO_CONF(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x04)
-#define GPIO_BLINK_EN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x08)
-#define GPIO_IN_POL(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x0c)
-#define GPIO_DATA_IN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x10)
-#define GPIO_EDGE_CAUSE(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x14)
-#define GPIO_EDGE_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x18)
-#define GPIO_LEVEL_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x1c)
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_KIRKWOOD_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_KIRKWOOD_GPIO_START;
-}
-
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 6e924b3..010bdeb 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -69,6 +69,8 @@
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
 #define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
 #define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
 #define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
 #define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
 #define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 28020ab..cbdb586 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -27,31 +27,21 @@
 
 void __init kirkwood_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 
 	/*
-	 * Mask and clear GPIO IRQ interrupts.
+	 * Initialize gpiolib for GPIOs 0-49.
 	 */
-	writel(0, GPIO_LEVEL_MASK(0));
-	writel(0, GPIO_EDGE_MASK(0));
-	writel(0, GPIO_EDGE_CAUSE(0));
-	writel(0, GPIO_LEVEL_MASK(32));
-	writel(0, GPIO_EDGE_MASK(32));
-	writel(0, GPIO_EDGE_CAUSE(32));
-
-	for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		irq_desc[i].status |= IRQ_LEVEL;
-		set_irq_flags(i, IRQF_VALID);
-	}
+	orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0,
+			IRQ_KIRKWOOD_GPIO_START);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
+
+	orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0,
+			IRQ_KIRKWOOD_GPIO_START + 32);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler);
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 27901f7..7ce2018 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -49,9 +49,6 @@
 	if (!variant_mask)
 		return;
 
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 1e5266f..00cca22 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -166,6 +166,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 65ee21f..7cdab57 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -261,6 +261,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -271,6 +272,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -281,6 +283,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 93afd3c..6be627d 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -402,6 +402,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -412,6 +413,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index cfcca41..f69beef 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -217,6 +217,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -228,6 +229,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -239,6 +241,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 513ad31..ca294ff 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,8 +18,16 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+void kirkwood_enable_pcie(void)
+{
+	u32 curr = readl(CLOCK_GATING_CTRL);
+	if (!(curr & CGC_PEX0))
+		writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
+}
+
 void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
+	kirkwood_enable_pcie();
 	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
 	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 0049614..75c6601 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -82,6 +82,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6192_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0998a08..0f75494 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -118,6 +118,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6281_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index d2eec35..0a95063 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -134,6 +134,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
@@ -144,6 +145,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index ce50e61a..e6b9b1b 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <sound/alc5623.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -134,6 +135,7 @@
 	MPP33_GE1_TXCTL,
 	MPP39_AU_I2SBCLK,
 	MPP40_AU_I2SDO,
+	MPP43_AU_I2SDI,
 	MPP41_AU_I2SLRCLK,
 	MPP42_AU_I2SMCLK,
 	MPP45_GPIO,		/* Power button */
@@ -141,6 +143,18 @@
 	0
 };
 
+static struct alc5623_platform_data alc5621_data = {
+	.add_ctrl = 0x3700,
+	.jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("alc5621", 0x1a),
+		.platform_data = &alc5621_data,
+	},
+};
+
 #define HP_T5325_GPIO_POWER_OFF		48
 
 static void hp_t5325_power_off(void)
@@ -166,6 +180,9 @@
 	kirkwood_ehci_init();
 	platform_device_register(&hp_t5325_button_device);
 
+	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+	kirkwood_audio_init();
+
 	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
 		pm_power_off = hp_t5325_power_off;
@@ -187,6 +204,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= hp_t5325_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index dc999c4..68f32f2 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -135,6 +135,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts219_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 9a44029..d5d0099 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -154,6 +154,8 @@
 static int __init ts41x_pci_init(void)
 {
 	if (machine_is_ts41x()) {
+		u32 dev, rev;
+
 		/*
 		 * Without this explicit reset, the PCIe SATA controller
 		 * (Marvell 88sx7042/sata_mv) is known to stop working
@@ -161,7 +163,11 @@
 		 */
 		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
 
-		kirkwood_pcie_init(KW_PCIE0);
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
 	}
 
    return 0;
@@ -173,6 +179,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts41x_init,
 	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 818f19d..e41e909 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,6 +18,7 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <mach/bridge-regs.h>
 #include <mach/loki.h>
 #include <plat/orion_nand.h>
 #include <plat/time.h>
@@ -290,9 +291,15 @@
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+void __init loki_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
 static void loki_timer_init(void)
 {
-	orion_time_init(IRQ_LOKI_BRIDGE, LOKI_TCLK);
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_LOKI_BRIDGE, LOKI_TCLK);
 }
 
 struct sys_timer loki_timer = {
diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h
index 26054fd..a315dcf 100644
--- a/arch/arm/mach-loki/common.h
+++ b/arch/arm/mach-loki/common.h
@@ -18,6 +18,7 @@
  */
 void loki_map_io(void);
 void loki_init(void);
+void loki_init_early(void);
 void loki_init_irq(void);
 
 extern struct mbus_dram_target_info loki_mbus_dram_info;
diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h
index a3fabf7..fd87732 100644
--- a/arch/arm/mach-loki/include/mach/bridge-regs.h
+++ b/arch/arm/mach-loki/include/mach/bridge-regs.h
@@ -17,11 +17,6 @@
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-
-#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0	0x0002
-#define BRIDGE_INT_TIMER1	0x0004
 #define BRIDGE_INT_TIMER1_CLR	0x0004
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index a1e75e7..35eae4e 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -93,6 +93,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= lb88rc8480_init,
 	.map_io		= loki_map_io,
+	.init_early	= loki_init_early,
 	.init_irq	= loki_init_irq,
 	.timer		= &loki_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 29e390e..20f3f12 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -148,6 +148,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 08465eb..44fb4e5 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -818,9 +818,15 @@
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+void __init mv78xx0_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
 static void mv78xx0_timer_init(void)
 {
-	orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
 struct sys_timer mv78xx0_timer = {
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index befc224..632e63d 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -20,6 +20,7 @@
 int mv78xx0_core_index(void);
 void mv78xx0_map_io(void);
 void mv78xx0_init(void);
+void mv78xx0_init_early(void);
 void mv78xx0_init_irq(void);
 
 extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 207c95e..df5aebe 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -96,6 +96,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index 2d14c4f..c64dbb9 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -20,10 +20,6 @@
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0	0x0002
-#define BRIDGE_INT_TIMER1	0x0004
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h
index d9d1535..77e1b84 100644
--- a/arch/arm/mach-mv78xx0/include/mach/gpio.h
+++ b/arch/arm/mach-mv78xx0/include/mach/gpio.h
@@ -6,35 +6,4 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <mach/irqs.h>
 #include <plat/gpio.h>
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-extern int mv78xx0_core_index(void);
-
-#define GPIO_MAX		32
-#define GPIO_OUT(pin)		(DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_IO_CONF(pin)	(DEV_BUS_VIRT_BASE + 0x0104)
-#define GPIO_BLINK_EN(pin)	(DEV_BUS_VIRT_BASE + 0x0108)
-#define GPIO_IN_POL(pin)	(DEV_BUS_VIRT_BASE + 0x010c)
-#define GPIO_DATA_IN(pin)	(DEV_BUS_VIRT_BASE + 0x0110)
-#define GPIO_EDGE_CAUSE(pin)	(DEV_BUS_VIRT_BASE + 0x0114)
-#define GPIO_MASK_OFF		(mv78xx0_core_index() ? 0x18 : 0)
-#define GPIO_EDGE_MASK(pin)	(DEV_BUS_VIRT_BASE + 0x0118 + GPIO_MASK_OFF)
-#define GPIO_LEVEL_MASK(pin)	(DEV_BUS_VIRT_BASE + 0x011c + GPIO_MASK_OFF)
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_MV78XX0_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_MV78XX0_GPIO_START;
-}
-
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3eff399..3674497 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -71,6 +71,7 @@
 #define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
 #define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
 #define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
 #define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
 #define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
 #define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 22b4ff8..08da497 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -26,28 +26,18 @@
 
 void __init mv78xx0_init_irq(void)
 {
-	int i;
-
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
 
 	/*
-	 * Mask and clear GPIO IRQ interrupts.
+	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
+	 * registers for core #1 are at an offset of 0x18 from those of
+	 * core #0.)
 	 */
-	writel(0, GPIO_LEVEL_MASK(0));
-	writel(0, GPIO_EDGE_MASK(0));
-	writel(0, GPIO_EDGE_CAUSE(0));
-
-	for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		irq_desc[i].status |= IRQ_LEVEL;
-		set_irq_flags(i, IRQF_VALID);
-	}
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE,
+			mv78xx0_core_index() ? 0x18 : 0,
+			IRQ_MV78XX0_GPIO_START);
 	set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 84db2df..65b72c4 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -44,9 +44,6 @@
 	if (!variant_mask)
 		return;
 
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index 3511ad4..d927f14 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -81,6 +81,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 0717f88..340809a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -94,6 +94,7 @@
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -183,6 +184,7 @@
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -199,6 +201,15 @@
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
 	select SOC_IMX35
@@ -229,4 +240,18 @@
 
 endchoice
 
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8db1329..a54faf2 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,8 +5,8 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
@@ -20,5 +20,7 @@
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG)		+= mach-bug.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_VPR200)	+= mach-vpr200.o
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 677b18a..d545d86 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -35,7 +35,7 @@
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
-#define imx31_add_imx_keypad(pdata)	\
+#define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
 extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c
new file mode 100644
index 0000000..314a983
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx31.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c
new file mode 100644
index 0000000..33983a4
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx35.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 14a5ffc..8076147 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -165,8 +165,8 @@
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define GPIO_LED1	(2 * 32 + 29)
-#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LED1	IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	(4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c
index a1d7fa5..cf8f809 100644
--- a/arch/arm/mach-mx3/iomux-imx31.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -97,7 +97,7 @@
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
  */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -118,10 +118,10 @@
 }
 EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 	int ret = -EINVAL;
 
@@ -139,7 +139,7 @@
 }
 EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
-void mxc_iomux_release_pin(const unsigned int pin)
+void mxc_iomux_release_pin(unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -148,9 +148,9 @@
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 
 	for (i = 0; i < count; i++) {
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 28b6f41..226829b 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -133,7 +133,6 @@
 };
 
 /* USB */
-#if defined(CONFIG_USB_ULPI)
 
 #define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
 #define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
@@ -176,8 +175,10 @@
 	gpio_set_value(OTG_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 otg_free_reset:
 	gpio_free(OTG_RESET);
@@ -233,8 +234,10 @@
 	gpio_set_value(USBH2_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 h2_free_reset:
 	gpio_free(USBH2_RESET);
@@ -246,15 +249,12 @@
 static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif /* CONFIG_USB_ULPI */
 
 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -547,15 +547,15 @@
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-#if defined(CONFIG_USB_ULPI)
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	imx31_add_mxc_ehci_otg(&usbotg_pdata);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbotg_pdata.otg)
+		imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
 static void __init armadillo5x0_timer_init(void)
@@ -569,9 +569,10 @@
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.timer		= &armadillo5x0_timer,
-	.init_machine	= armadillo5x0_init,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &armadillo5x0_timer,
+	.init_machine = armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c
new file mode 100644
index 0000000..d137d70
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-bug.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/iomux-mx3.h>
+#include <mach/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx31.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const unsigned int bug_pins[] __initconst = {
+	MX31_PIN_PC_RST__CTS5,
+	MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5,
+	MX31_PIN_PC_BVD1__RXD5,
+};
+
+static void __init bug_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(bug_pins,
+				      ARRAY_SIZE(bug_pins), "uart-4");
+	imx31_add_imx_uart4(&uart_pdata);
+}
+
+static void __init bug_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer bug_timer = {
+	.init = bug_timer_init,
+};
+
+MACHINE_START(BUG, "BugLabs BUGBase")
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &bug_timer,
+	.init_machine = bug_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 26ae90f..ec63d99 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -60,7 +60,7 @@
 	.x_plate_ohms		= 180,
 };
 
-#define TSC2007_IRQGPIO		(2 * 32 + 2)
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
@@ -111,15 +111,25 @@
 	.flash_bbt	= 1,
 };
 
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx35_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= eukrea_cpuimx35_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
@@ -146,7 +156,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init eukrea_cpuimx35_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
@@ -184,9 +194,10 @@
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &eukrea_cpuimx35_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &eukrea_cpuimx35_timer,
+	.init_machine = eukrea_cpuimx35_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index a5f3eb2..d3cc739 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -266,17 +266,14 @@
 }
 
 static struct sys_timer kzm_timer = {
-	.init   = kzm_timer_init,
+	.init = kzm_timer_init,
 };
 
-/*
- * The following uses standard kernel macros define in arch.h in order to
- * initialize __mach_desc_KZM_ARM11_01 data structure.
- */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = kzm_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = kzm_board_init,
-	.timer          = &kzm_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = kzm_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &kzm_timer,
+	.init_machine = kzm_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0d65db8..544d3e4 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -21,9 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/memblock.h>
+
+#include <media/soc_camera.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -35,6 +39,10 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -42,10 +50,6 @@
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static int mx31_3ds_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
@@ -53,6 +57,12 @@
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/*SPI0*/
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
 	/* SPI 1 */
 	MX31_PIN_CSPI2_SCLK__SCLK,
 	MX31_PIN_CSPI2_MOSI__MOSI,
@@ -100,6 +110,252 @@
 	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
 	/* USB Host2 reset */
 	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
+	/* I2C1 */
+	MX31_PIN_I2C_CLK__I2C1_SCL,
+	MX31_PIN_I2C_DAT__I2C1_SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
+	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_CONTRAST__CONTRAST,
+	/* CSI */
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
+	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
+};
+
+/*
+ * Camera support
+ */
+static phys_addr_t mx3_camera_base __initdata;
+#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
+
+#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
+
+static struct gpio mx31_3ds_camera_gpios[] = {
+	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
+	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
+};
+
+static int __init mx31_3ds_camera_alloc_dma(void)
+{
+	int dma;
+
+	if (!mx3_camera_base)
+		return -ENOMEM;
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					mx3_camera_base, mx3_camera_base,
+					MX31_3DS_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	if (!(dma & DMA_MEMORY_MAP))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int mx31_3ds_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
+	msleep(20);
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info mx31_3ds_i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
+	{ .supply = "cmos_vcore" },
+	{ .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id		= 0,
+	.board_info	= &mx31_3ds_i2c_camera,
+	.i2c_adapter_id	= 0,
+	.power		= mx31_3ds_camera_power,
+	.regulators	= mx31_3ds_camera_regs,
+	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
+};
+
+static struct platform_device mx31_3ds_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+
+struct mx3_camera_pdata mx31_3ds_camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2600,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 480x640 @ 60 Hz */
+		.name		= "Epson-VGA",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 640,
+		.pixclock	= 41701,
+		.left_margin	= 20,
+		.right_margin	= 41,
+		.upper_margin	= 10,
+		.lower_margin	= 5,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Epson-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
+	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
+	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+	.core_supply		= "lcd_2v8",
+	.io_supply		= "vdd_lcdio",
+};
+
+/*
+ * Support for SD card slot in personality board
+ */
+#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static struct gpio mx31_3ds_sdhc1_gpios[] = {
+	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
+	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
+};
+
+static int mx31_3ds_sdhc1_init(struct device *dev,
+			       irq_handler_t detect_irq,
+			       void *data)
+{
+	int ret;
+
+	ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
+				 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC GPIOs.\n");
+		return ret;
+	}
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+			  detect_irq, IRQF_DISABLED |
+			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			  "sdhc1-detect", data);
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
+		goto gpio_free;
+	}
+
+	return 0;
+
+gpio_free:
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	return ret;
+}
+
+static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+}
+
+static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
+{
+	/*
+	 * While the voltage stuff is done by the driver, activate the
+	 * Buffer Enable Pin only if there is a card in slot to fix the card
+	 * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
+	 * Done here because at this stage we have for sure a debounced value
+	 * of the presence of the card, showed by the value of vdd.
+	 * 7 == ilog2(MMC_VDD_165_195)
+	 */
+	if (vdd > 7)
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
+	else
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init		= mx31_3ds_sdhc1_init,
+	.exit		= mx31_3ds_sdhc1_exit,
+	.setpower	= mx31_3ds_sdhc1_setpower,
 };
 
 /*
@@ -138,7 +394,71 @@
 	}
 };
 
-static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+static struct regulator_consumer_supply vmmc2_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
+};
+
+static struct regulator_init_data vmmc2_init = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
+	.consumer_supplies = vmmc2_consumers,
+};
+
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+	REGULATOR_SUPPLY("lcd_2v8", NULL),
+	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vmmc1_init = {
+	.constraints = {
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+	.consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+	REGULATOR_SUPPLY("vdd_lcdio", NULL),
+};
+
+static struct regulator_init_data vgen_init = {
+	.constraints = {
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+	.consumer_supplies = vgen_consumers,
+};
+
+static struct regulator_consumer_supply vvib_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+	.constraints = {
+		.min_uV = 1300000,
+		.max_uV = 1300000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+	.consumer_supplies = vvib_consumers,
+};
+
+static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
 		.init_data = &pwgtx_init,
@@ -152,17 +472,38 @@
 	}, {
 		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
 		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
+		.init_data = &vmmc2_init,
+	}, {
+		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
+		.init_data = &vmmc1_init,
+	}, {
+		.id = MC13783_REG_VGEN,  /* Power LCD */
+		.init_data = &vgen_init,
+	}, {
+		.id = MC13783_REG_VVIB,  /* Power CMOS */
+		.init_data = &vvib_init,
 	},
 };
 
 /* MC13783 */
-static struct mc13783_platform_data mc13783_pdata __initdata = {
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.regulators = mx31_3ds_regulators,
 	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
-	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+	.flags  = MC13XXX_USE_REGULATOR | MC13XXX_USE_TOUCHSCREEN
 };
 
 /* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
 static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 	MXC_SPI_CS(2),
@@ -182,6 +523,12 @@
 		.platform_data	= &mc13783_pdata,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
 		.mode = SPI_CS_HIGH,
+	}, {
+		.modalias	= "l4f00242t03",
+		.max_speed_hz	= 5000000,
+		.bus_num	= 0,
+		.chip_select	= 0, /* SS2 */
+		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
 	},
 };
 
@@ -245,6 +592,11 @@
 	return err;
 }
 
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
 static int mx31_3ds_host2_init(struct platform_device *pdev)
 {
 	int err;
@@ -276,25 +628,25 @@
 
 	mdelay(1);
 	gpio_set_value(USBH2_RST_B, 1);
-	return 0;
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 
 usbotg_free_reset:
 	gpio_free(USBH2_RST_B);
 	return err;
 }
 
-#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx31_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init = mx31_3ds_host2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
-#endif
 
 static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -320,19 +672,18 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31_3ds_map_io(void)
-{
-	mx31_map_io();
-}
+static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
 
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
+static struct platform_device *devices[] __initdata = {
+	&mx31_3ds_ov2640,
+};
+
+static void __init mx31_3ds_init(void)
 {
+	int ret;
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
@@ -343,20 +694,22 @@
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	mx31_3ds_usbotg_init();
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx31_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&usbotg_pdata);
 
@@ -364,6 +717,26 @@
 		printk(KERN_WARNING "Init of the debug board failed, all "
 				    "devices on the debug board are unusable.\n");
 	imx31_add_imx2_wdt(NULL);
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request_array(mx31_3ds_camera_gpios,
+				 ARRAY_SIZE(mx31_3ds_camera_gpios));
+	if (ret) {
+		pr_err("Failed to request camera gpios");
+		iclink_ov2640.power = NULL;
+	}
+
+	if (!mx31_3ds_camera_alloc_dma())
+		mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
+	else
+		pr_err("Failed to allocate dma memory for camera");
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -375,15 +748,22 @@
 	.init	= mx31_3ds_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31_3DS data structure.
- */
+static void __init mx31_3ds_reserve(void)
+{
+	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE,
+					 MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_3ds_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31_3ds_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31_3ds_timer,
+	.init_machine = mx31_3ds_init,
+	.reserve = mx31_3ds_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 88b97d6..4e4b780 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -69,12 +69,8 @@
 #define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
 
 #define MXC_MAX_EXP_IO_LINES	16
-/*
- * This file contains the board-specific initialization routines.
- */
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*!
+/*
  * The serial port definition structure.
  */
 static struct plat_serial8250_port serial_platform_data[] = {
@@ -110,14 +106,7 @@
 {
 	return platform_device_register(&serial_device);
 }
-#else
-static inline int mxc_init_extuart(void)
-{
-	return 0;
-}
-#endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -134,11 +123,6 @@
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	imx31_add_imx_uart0(&uart_pdata);
 }
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* !SERIAL_IMX */
 
 static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -160,7 +144,7 @@
 
 /*
  * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_mask_irq(struct irq_data *d)
 {
@@ -172,7 +156,7 @@
 
 /*
  * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_ack_irq(struct irq_data *d)
 {
@@ -183,7 +167,7 @@
 
 /*
  * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
+ * @param d	an expio virtual irq description
  */
 static void expio_unmask_irq(struct irq_data *d)
 {
@@ -476,7 +460,6 @@
 };
 #endif
 
-#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
 static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 	{
@@ -497,11 +480,6 @@
 
 	imx31_add_imx_i2c1(NULL);
 }
-#else
-static void mxc_init_i2c(void)
-{
-}
-#endif
 
 static unsigned int ssi_pins[] = {
 	MX31_PIN_SFS5__SFS5,
@@ -516,9 +494,7 @@
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
-/*!
- * This structure defines static mappings for the i.MX31ADS board.
- */
+/* static mappings */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
 		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
@@ -528,9 +504,6 @@
 	},
 };
 
-/*!
- * Set up static virtual mappings.
- */
 static void __init mx31ads_map_io(void)
 {
 	mx31_map_io();
@@ -543,10 +516,7 @@
 	mx31ads_init_expio();
 }
 
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
+static void __init mx31ads_init(void)
 {
 	mxc_init_extuart();
 	mxc_init_imx_uart();
@@ -563,15 +533,12 @@
 	.init	= mx31ads_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31ADS data structure.
- */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31ads_map_io,
-	.init_irq       = mx31ads_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31ads_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31ads_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31ads_init_irq,
+	.timer = &mx31ads_timer,
+	.init_machine = mx31ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 2c59548..ed95745 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
@@ -110,55 +111,9 @@
 
 /* USB */
 
-#if defined(CONFIG_USB_ULPI)
-
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
-static int usbotg_init(struct platform_device *pdev)
-{
-	unsigned int pins[] = {
-		MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-		MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-		MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-		MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-		MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-		MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-		MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-		MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-		MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-		MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-		MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-		MX31_PIN_USBOTG_STP__USBOTG_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
-	mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
-				"USBOTG_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
-
-	return 0;
-}
-
 static int usbh1_init(struct platform_device *pdev)
 {
 	int pins[] = {
@@ -183,7 +138,10 @@
 
 	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 static int usbh2_init(struct platform_device *pdev)
@@ -220,41 +178,30 @@
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
-}
+	mdelay(10);
 
-static struct mxc_usbh_platform_data usbotg_pdata = {
-	.init	= usbotg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
-};
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.init	= usbh1_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void lilly1131_usb_init(void)
 {
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
 	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
 
-#else
-static inline void lilly1131_usb_init(void) {}
-#endif /* CONFIG_USB_ULPI */
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
 
 /* SPI */
 
@@ -274,8 +221,8 @@
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
 };
 
 static struct spi_board_info mc13783_dev __initdata = {
@@ -347,10 +294,10 @@
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.init_machine	= mx31lilly_board_init,
-	.timer		= &mx31lilly_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lilly_timer,
+	.init_machine = mx31lilly_board_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 9e64c66..24a21a3 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -27,6 +27,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -111,9 +112,9 @@
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags  = MC13783_USE_RTC |
-		  MC13783_USE_REGULATOR,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13XXX_USE_RTC |
+		  MC13XXX_USE_REGULATOR,
 };
 
 static struct spi_board_info mc13783_spi_dev __initdata = {
@@ -129,7 +130,6 @@
  * USB
  */
 
-#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -167,15 +167,15 @@
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
 	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init   = usbh2_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
-#endif
 
 /*
  * NOR flash
@@ -227,7 +227,7 @@
 static int mx31lite_baseboard;
 core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
 
-static void __init mxc_board_init(void)
+static void __init mx31lite_init(void)
 {
 	int ret;
 
@@ -252,13 +252,11 @@
 	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	/* USB */
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
@@ -281,9 +279,10 @@
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31lite_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31lite_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31lite_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lite_timer,
+	.init_machine = mx31lite_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 1aa8d65..6f3692b 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -214,7 +214,7 @@
 	.consumer_supplies = cam_consumers,
 };
 
-static struct mc13783_regulator_init_data moboard_regulators[] = {
+static struct mc13xxx_regulator_init_data moboard_regulators[] = {
 	{
 		.id = MC13783_REG_VMMC1,
 		.init_data = &sdhc_vreg_data,
@@ -267,12 +267,12 @@
 	.tc2_period = MC13783_LED_PERIOD_10MS,
 };
 
-static struct mc13783_platform_data moboard_pmic = {
+static struct mc13xxx_platform_data moboard_pmic = {
 	.regulators = moboard_regulators,
 	.num_regulators = ARRAY_SIZE(moboard_regulators),
 	.leds = &moboard_leds,
-	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-		MC13783_USE_ADC | MC13783_USE_LED,
+	.flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
+		MC13XXX_USE_ADC | MC13XXX_USE_LED,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -400,19 +400,24 @@
 	mdelay(1);
 }
 
-#if defined(CONFIG_USB_ULPI)
+static int moboard_usbh2_init_hw(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= moboard_usbh2_init_hw,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init moboard_usbh2_init(void)
 {
 	struct platform_device *pdev;
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (!usbh2_pdata.otg)
+		return -ENODEV;
 
 	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 	if (IS_ERR(pdev))
@@ -420,10 +425,6 @@
 
 	return 0;
 }
-#else
-static inline int moboard_usbh2_init(void) { return 0; }
-#endif
-
 
 static struct gpio_led mx31moboard_leds[] = {
 	{
@@ -503,7 +504,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx31moboard_init(void)
 {
 	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
 		"moboard");
@@ -564,10 +565,10 @@
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31moboard_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31moboard_timer,
+	.init_machine = mx31moboard_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b1963f2..ff5fe23 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -118,24 +118,42 @@
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
 };
 
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
 /* OTG config */
 static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+/*
+ * ENGCM09152 also requires a hardware change.
+ * Please check the MX35 Chip Errata document for details.
+ */
 };
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx35_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.init		= mx35_3ds_usbh_init,
 	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
 };
 
 static int otg_mode_host;
@@ -153,10 +171,14 @@
 }
 __setup("otg_mode=", mx35_3ds_otg_mode);
 
+static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx35_3ds_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
@@ -180,6 +202,7 @@
 	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all "
 				"devices on the debugboard are unusable.\n");
+	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -193,9 +216,10 @@
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx35pdk_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &mx35pdk_timer,
+	.init_machine = mx35_3ds_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index b752f6b..f07d3bd 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -533,17 +533,25 @@
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm037_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= pcm037_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -568,7 +576,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm037_init(void)
 {
 	int ret;
 
@@ -646,19 +654,18 @@
 
 	platform_device_register(&pcm970_sja1000);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx31_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -675,9 +682,10 @@
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm037_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &pcm037_timer,
+	.init_machine = pcm037_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index fda5654..df6fb07 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -180,9 +180,7 @@
 
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
-#endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
 
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index bcf83fc..b3ecfb2 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -115,7 +115,6 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
@@ -134,7 +133,6 @@
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
@@ -221,9 +219,9 @@
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define AC97_GPIO_TXFS	(1 * 32 + 31)
-#define AC97_GPIO_TXD	(1 * 32 + 28)
-#define AC97_GPIO_RESET	(1 * 32 + 0)
+#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
+#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
+#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -307,18 +305,26 @@
 	.hw_ecc = 1,
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm043_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= pcm043_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -343,7 +349,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm043_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
@@ -369,26 +375,22 @@
 
 	imx35_add_imx_uart1(&uart_pdata);
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-#endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx35_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx35_add_mxc_ehci_otg(&otg_pdata);
 	}
-
 	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-#endif
+
 	if (!otg_mode_host)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -407,10 +409,10 @@
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm043_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &pcm043_timer,
+	.init_machine = pcm043_init,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index fd1050c..17f758b 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -54,10 +54,6 @@
 
 #define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -247,7 +243,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init qong_init(void)
 {
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
@@ -263,16 +259,12 @@
 	.init	= qong_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_QONG data structure.
- */
-
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &qong_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &qong_timer,
+	.init_machine = qong_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
new file mode 100644
index 0000000..2cf390f
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ * Copyright 2010 Creative Product Design
+ *
+ * Derived from mx35 3stack.
+ * Original author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/mfd/mc13xxx.h>
+#include <linux/gpio_keys.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
+#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
+
+#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
+#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
+#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
+#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
+#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
+#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
+#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
+#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 800x480 @ 60 Hz */
+		.name		= "PT0708048",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(33260),
+		.left_margin	= 50,
+		.right_margin	= 156,
+		.upper_margin	= 10,
+		.lower_margin	= 10,
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 800x480 @ 60 Hz */
+		.name		= "CTP-CLAA070LC0ACW",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(27000),
+		.left_margin	= 50,
+		.right_margin	= 50,	/* whole line should have 900 clocks */
+		.upper_margin	= 10,
+		.lower_margin	= 10,	/* whole frame should have 500 lines */
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "PT0708048",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data vpr200_flash_data = {
+	.width  = 2,
+};
+
+static struct resource vpr200_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device vpr200_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &vpr200_flash_data,
+	},
+	.resource = &vpr200_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data
+		vpr200_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
+#define VPR_KEY_DEBOUNCE	500
+static struct gpio_keys_button vpr200_gpio_keys_table[] = {
+	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
+	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
+};
+
+static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+	.buttons = vpr200_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
+};
+
+static struct platform_device vpr200_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &vpr200_gpio_keys_data,
+	}
+};
+
+static struct mc13xxx_platform_data vpr200_pmic = {
+	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
+};
+
+static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data vpr200_eeprom = {
+	.byte_len = 2048 / 8,
+	.page_size = 1,
+};
+
+static struct i2c_board_info vpr200_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
+		.platform_data = &vpr200_eeprom,
+	}, {
+		I2C_BOARD_INFO("mc13892", 0x08),
+		.platform_data = &vpr200_pmic,
+		.irq = gpio_to_irq(GPIO_PMIC_INT),
+	}
+};
+
+static iomux_v3_cfg_t vpr200_pads[] = {
+	/* UART1 */
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART3 */
+	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
+	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD Enable */
+	MX35_PAD_D3_VSYNC__GPIO1_2,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* PMIC */
+	MX35_PAD_GPIO2_0__GPIO2_0,
+	/* GPIO keys */
+	MX35_PAD_SCKR__GPIO1_4,
+	MX35_PAD_COMPARE__GPIO1_5,
+	MX35_PAD_SCKT__GPIO1_7,
+	MX35_PAD_FST__GPIO1_8,
+	MX35_PAD_HCKT__GPIO1_9,
+	MX35_PAD_TX5_RX0__GPIO1_10,
+	MX35_PAD_TX4_RX1__GPIO1_11,
+	MX35_PAD_TX3_RX2__GPIO1_12,
+};
+
+/* USB Device config */
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+/* USB HOST config */
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.portsc		= MXC_EHCI_MODE_SERIAL,
+	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&vpr200_flash,
+	&vpr200_device_gpiokeys,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init vpr200_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
+
+	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
+		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+
+	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
+		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
+	else
+		gpio_direction_input(GPIO_PMIC_INT);
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+
+	i2c_register_board_info(0, vpr200_i2c_devices,
+			ARRAY_SIZE(vpr200_i2c_devices));
+
+	imx35_add_imx_i2c0(&vpr200_i2c0_data);
+}
+
+static void __init vpr200_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer vpr200_timer = {
+	.init	= vpr200_timer_init,
+};
+
+MACHINE_START(VPR200, "VPR200")
+	/* Maintainer: Creative Product Design */
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &vpr200_timer,
+	.init_machine = vpr200_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 47118f7..54d7174 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -27,14 +27,8 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-
-/*!
- * @file mm.c
- *
- * @brief This file creates static virtual to physical mappings, common to all MX3 boards.
- *
- * @ingroup Memory
- */
+#include <mach/gpio.h>
+#include <mach/irqs.h>
 
 #ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
@@ -52,17 +46,25 @@
  */
 void __init mx31_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-int imx31_register_gpios(void);
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	imx31_register_gpios();
+	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -77,18 +79,26 @@
 
 void __init mx35_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
-int imx35_register_gpios(void);
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
 void __init mx35_init_irq(void)
 {
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	imx35_register_gpios();
+	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
 }
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
@@ -129,4 +139,3 @@
 
 arch_initcall(mxc_init_l2x0);
 #endif
-
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 94a0b9e..6410b9c 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -15,6 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -149,7 +150,10 @@
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -187,7 +191,6 @@
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= devboard_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init devboard_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index f449a97..57f7b00 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -265,7 +265,10 @@
 	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
 
-	return 0;
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 #define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
@@ -303,7 +306,6 @@
 static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= marxbot_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static int __init marxbot_usbh1_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index bbec3c8..35f806e 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -123,17 +123,24 @@
 
 #if defined(CONFIG_USB_ULPI)
 
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
 static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+	.init	= smartbot_otg_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init smartbot_otg_host_init(void)
 {
 	struct platform_device *pdev;
 
-	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+		ULPI_OTG_DRVVBUS_EXT);
+	if (!otg_host_pdata.otg)
+		return -ENODEV;
 
 	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
 	if (IS_ERR(pdev))
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index de4fa992f..83ee088 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,5 +1,6 @@
 if ARCH_MX5
-# ARCH_MX51 and ARCH_MX50 are left for compatibility
+# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
+# image. So for most time, SOC_IMX50/51/53 should be used.
 
 config ARCH_MX50
 	bool
@@ -50,6 +51,7 @@
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
@@ -112,19 +114,32 @@
 
 endchoice
 
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
+config MX51_EFIKA_COMMON
+	bool
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select MX51_EFIKA_COMMON
 	help
 	  Include support for Genesi Efika MX nettop. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX51_EFIKASB
+	bool "Support MX51 Genesi Efika Smartbook"
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika Smartbook. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_MX53_EVK
 	bool "Support MX53 EVK platforms"
 	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
@@ -136,6 +151,8 @@
 config MACH_MX53_SMD
 	bool "Support MX53 SMD platforms"
 	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX53 SMD platform. This includes specific
@@ -144,7 +161,10 @@
 config MACH_MX53_LOCO
 	bool "Support MX53 LOCO platforms"
 	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -157,6 +177,7 @@
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_FEC
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0d43be9..4f63048 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
@@ -16,5 +16,7 @@
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
 obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
 obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index f8652ef..d0296a9 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -60,7 +60,6 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ		0x02
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
@@ -105,12 +104,9 @@
 		.platform_data = serial_platform_data,
 	},
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	&serial_device,
-#endif
 };
 
 static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
@@ -188,7 +184,10 @@
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -206,13 +205,16 @@
 	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -223,7 +225,6 @@
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -298,7 +299,8 @@
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine = eukrea_cpuimx51_init,
 	.timer = &mxc_timer,
+	.init_machine = eukrea_cpuimx51_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ad93189..29b1808 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -42,6 +42,7 @@
 
 #include "devices-imx51.h"
 #include "devices.h"
+#include "cpu_op-mx51.h"
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
 #define ETH_RST			IMX_GPIO_NR(2, 31)
@@ -109,7 +110,7 @@
 
 	/* Touchscreen */
 	/* IRQ */
-	_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
@@ -118,15 +119,9 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int ts_get_pendown_state(void)
-{
-	return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1;
-}
-
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
-	.get_pendown_state	= ts_get_pendown_state,
 };
 
 static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
@@ -167,7 +162,10 @@
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -186,13 +184,16 @@
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
 			usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -203,7 +204,6 @@
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -242,7 +242,7 @@
 static struct spi_board_info cpuimx51sd_spi_device[] = {
 	{
 		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
+		.max_speed_hz    = 10000000,
 		.bus_num         = 0,
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
@@ -269,6 +269,10 @@
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
+#if defined(CONFIG_CPU_FREQ_IMX)
+	get_cpu_op = mx51_get_cpu_op;
+#endif
+
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
 
@@ -329,7 +333,8 @@
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine = eukrea_cpuimx51sd_init,
 	.timer = &mxc_timer,
+	.init_machine = eukrea_cpuimx51sd_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index fd32e4c..dedf7f2 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -35,7 +35,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "devices-mx50.h"
+#include "devices-imx50.h"
+
+#define FEC_EN		IMX_GPIO_NR(6, 23)
+#define FEC_RESET_B	IMX_GPIO_NR(4, 12)
 
 static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
 	/* SD1 */
@@ -102,7 +105,7 @@
 	MX50_PAD_I2C3_SCL__USBOTG_OC,
 
 	MX50_PAD_SSI_RXC__FEC_MDIO,
-	MX50_PAD_SSI_RXC__FEC_MDIO,
+	MX50_PAD_SSI_RXFS__FEC_MDC,
 	MX50_PAD_DISP_D0__FEC_TXCLK,
 	MX50_PAD_DISP_D1__FEC_RX_ER,
 	MX50_PAD_DISP_D2__FEC_RX_DV,
@@ -111,7 +114,6 @@
 	MX50_PAD_DISP_D5__FEC_TX_EN,
 	MX50_PAD_DISP_D6__FEC_TXD1,
 	MX50_PAD_DISP_D7__FEC_TXD0,
-	MX50_PAD_SSI_RXFS__FEC_MDC,
 	MX50_PAD_I2C3_SDA__GPIO_6_23,
 	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
 
@@ -168,6 +170,24 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static const struct fec_platform_data fec_data __initconst = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static inline void mx50_rdp_fec_reset(void)
+{
+	gpio_request(FEC_EN, "fec-en");
+	gpio_direction_output(FEC_EN, 0);
+	gpio_request(FEC_RESET_B, "fec-reset_b");
+	gpio_direction_output(FEC_RESET_B, 0);
+	msleep(1);
+	gpio_set_value(FEC_RESET_B, 1);
+}
+
+static const struct imxi2c_platform_data i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 /*
  * Board specific initialization.
  */
@@ -178,6 +198,11 @@
 
 	imx50_add_imx_uart(0, &uart_pdata);
 	imx50_add_imx_uart(1, &uart_pdata);
+	mx50_rdp_fec_reset();
+	imx50_add_fec(&fec_data);
+	imx50_add_imx_i2c(0, &i2c_data);
+	imx50_add_imx_i2c(1, &i2c_data);
+	imx50_add_imx_i2c(2, &i2c_data);
 }
 
 static void __init mx50_rdp_timer_init(void)
@@ -191,7 +216,8 @@
 
 MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.map_io = mx50_map_io,
+	.init_early = imx50_init_early,
 	.init_irq = mx50_init_irq,
-	.init_machine = mx50_rdp_board_init,
 	.timer = &mx50_rdp_timer,
+	.init_machine = mx50_rdp_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 49d6448..63dfbea 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -71,24 +71,10 @@
 };
 
 /* Serial ports */
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static inline void mxc_init_imx_uart(void)
-{
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* SERIAL_IMX */
-
-#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
 static int mx51_3ds_board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(0, 1, KEY_2),
@@ -124,16 +110,6 @@
 	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
 };
 
-static void mxc_init_keypad(void)
-{
-	imx51_add_imx_keypad(&mx51_3ds_map_data);
-}
-#else
-static inline void mxc_init_keypad(void)
-{
-}
-#endif
-
 static int mx51_3ds_spi2_cs[] = {
 	MXC_SPI_CS(0),
 	MX51_3DS_ECSPI2_CS,
@@ -157,11 +133,14 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx51_3ds_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
 					ARRAY_SIZE(mx51_3ds_pads));
-	mxc_init_imx_uart();
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
 
 	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
 	spi_register_board_info(mx51_3ds_spi_nor_device,
@@ -172,7 +151,8 @@
 				    "devices on the board are unusable.\n");
 
 	imx51_add_sdhci_esdhc_imx(0, NULL);
-	mxc_init_keypad();
+	imx51_add_imx_keypad(&mx51_3ds_map_data);
+	imx51_add_imx2_wdt(0, NULL);
 }
 
 static void __init mx51_3ds_timer_init(void)
@@ -180,15 +160,16 @@
 	mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mxc_timer = {
-	.init	= mx51_3ds_timer_init,
+static struct sys_timer mx51_3ds_timer = {
+	.init = mx51_3ds_timer_init,
 };
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine = mxc_board_init,
-	.timer = &mxc_timer,
+	.timer = &mx51_3ds_timer,
+	.init_machine = mx51_3ds_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 1d231e8..b2ecd19 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -161,23 +161,10 @@
 };
 
 /* Serial ports */
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static inline void mxc_init_imx_uart(void)
-{
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* SERIAL_IMX */
-
 static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
 	.bitrate = 100000,
 };
@@ -272,7 +259,10 @@
 	v |= MX51_USB_PLL_DIV_19_2_MHZ;
 	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
 }
 
 static int initialize_usbh1_port(struct platform_device *pdev)
@@ -290,13 +280,16 @@
 	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
 	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
 	iounmap(usb_base);
-	return 0;
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data dr_utmi_config = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
-	.flags	= MXC_EHCI_INTERNAL_PHY,
 };
 
 static struct fsl_usb2_platform_data usb_pdata = {
@@ -307,7 +300,6 @@
 static struct mxc_usbh_platform_data usbh1_config = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
 };
 
 static int otg_mode_host;
@@ -349,7 +341,7 @@
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
@@ -360,7 +352,11 @@
 #endif
 	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
 					ARRAY_SIZE(mx51babbage_pads));
-	mxc_init_imx_uart();
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
+
 	babbage_fec_reset();
 	imx51_add_fec(NULL);
 
@@ -399,15 +395,16 @@
 	mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mxc_timer = {
-	.init	= mx51_babbage_timer_init,
+static struct sys_timer mx51_babbage_timer = {
+	.init = mx51_babbage_timer_init,
 };
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine = mxc_board_init,
-	.timer = &mxc_timer,
+	.timer = &mx51_babbage_timer,
+	.init_machine = mx51_babbage_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index b7946f8..acab191 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -25,6 +25,9 @@
 #include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -40,8 +43,7 @@
 
 #include "devices-imx51.h"
 #include "devices.h"
-
-#define	MX51_USB_PLL_DIV_24_MHZ	0x01
+#include "efika.h"
 
 #define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
 #define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
@@ -53,13 +55,14 @@
 
 #define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
 
-#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
-
 /* board 1.1 doesn't have same reset gpio */
 #define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
 #define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
 
+#define EFIKAMX_POWEROFF	IMX_GPIO_NR(4, 13)
+
+#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
+
 /* the pci ids pin have pull up. they're driven low according to board id */
 #define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
 #define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
@@ -67,38 +70,11 @@
 #define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
 
 static iomux_v3_cfg_t mx51efikamx_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
 	/* board id */
 	MX51_PAD_PCBID0,
 	MX51_PAD_PCBID1,
 	MX51_PAD_PCBID2,
 
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-
-	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-
 	/* leds */
 	MX51_PAD_CSI1_D9__GPIO3_13,
 	MX51_PAD_CSI1_VSYNC__GPIO3_14,
@@ -107,64 +83,12 @@
 	/* power key */
 	MX51_PAD_PWRKEY,
 
-	/* spi */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-
 	/* reset */
 	MX51_PAD_DI1_PIN13__GPIO3_2,
 	MX51_PAD_GPIO1_4__GPIO1_4,
-};
 
-/* Serial ports */
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static const struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mxc_init_imx_uart(void)
-{
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* SERIAL_IMX */
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_24_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-	return 0;
-}
-
-static struct mxc_usbh_platform_data dr_utmi_config = {
-	.init   = initialize_otg_port,
-	.portsc = MXC_EHCI_UTMI_16BIT,
-	.flags  = MXC_EHCI_INTERNAL_PHY,
+	/* power off */
+	MX51_PAD_CSI2_VSYNC__GPIO4_13,
 };
 
 /*   PCBID2  PCBID1 PCBID0  STATE
@@ -265,47 +189,6 @@
 	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
 };
 
-static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
-	{
-	 .name = "u-boot",
-	 .offset = 0,
-	 .size = SZ_256K,
-	},
-	{
-	  .name = "config",
-	  .offset = MTDPART_OFS_APPEND,
-	  .size = SZ_64K,
-	},
-};
-
-static struct flash_platform_data mx51_efikamx_spi_flash_data = {
-	.name		= "spi_flash",
-	.parts		= mx51_efikamx_spi_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
-	.type		= "sst25vf032b",
-};
-
-static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &mx51_efikamx_spi_flash_data,
-		.irq = -1,
-	},
-};
-
-static int mx51_efikamx_spi_cs[] = {
-	EFIKAMX_SPI_CS0,
-	EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
-	.chipselect     = mx51_efikamx_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
-};
-
 void mx51_efikamx_reset(void)
 {
 	if (system_rev == 0x11)
@@ -314,14 +197,53 @@
 		gpio_direction_output(EFIKAMX_RESET, 0);
 }
 
-static void __init mxc_board_init(void)
+static struct regulator *pwgt1, *pwgt2, *coincell;
+
+static void mx51_efikamx_power_off(void)
+{
+	if (!IS_ERR(coincell))
+		regulator_disable(coincell);
+
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_disable(pwgt2);
+		regulator_disable(pwgt1);
+	}
+	gpio_direction_output(EFIKAMX_POWEROFF, 1);
+}
+
+static int __init mx51_efikamx_power_init(void)
+{
+	if (machine_is_mx51_efikamx()) {
+		pwgt1 = regulator_get(NULL, "pwgt1");
+		pwgt2 = regulator_get(NULL, "pwgt2");
+		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+			regulator_enable(pwgt1);
+			regulator_enable(pwgt2);
+		}
+		gpio_request(EFIKAMX_POWEROFF, "poweroff");
+		pm_power_off = mx51_efikamx_power_off;
+
+		/* enable coincell charger. maybe need a small power driver ? */
+		coincell = regulator_get(NULL, "coincell");
+		if (!IS_ERR(coincell)) {
+			regulator_set_voltage(coincell, 3000000, 3000000);
+			regulator_enable(coincell);
+		}
+
+		regulator_has_full_constraints();
+	}
+
+	return 0;
+}
+late_initcall(mx51_efikamx_power_init);
+
+static void __init mx51_efikamx_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
 					ARRAY_SIZE(mx51efikamx_pads));
+	efika_board_common_init();
+
 	mx51_efikamx_board_id();
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
-	mxc_init_imx_uart();
-	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	/* on < 1.2 boards both SD controllers are used */
 	if (system_rev < 0x12) {
@@ -332,10 +254,6 @@
 	platform_device_register(&mx51_efikamx_leds_device);
 	imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
 
-	spi_register_board_info(mx51_efikamx_spi_board_info,
-		ARRAY_SIZE(mx51_efikamx_spi_board_info));
-	imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
-
 	if (system_rev == 0x11) {
 		gpio_request(EFIKAMX_RESET1_1, "reset");
 		gpio_direction_output(EFIKAMX_RESET1_1, 1);
@@ -343,6 +261,20 @@
 		gpio_request(EFIKAMX_RESET, "reset");
 		gpio_direction_output(EFIKAMX_RESET, 1);
 	}
+
+	/*
+	 * enable wifi by default only on mx
+	 * sb and mx have same wlan pin but the value to enable it are
+	 * different :/
+	 */
+	gpio_request(EFIKA_WLAN_EN, "wlan_en");
+	gpio_direction_output(EFIKA_WLAN_EN, 0);
+	msleep(10);
+
+	gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
+	gpio_direction_output(EFIKA_WLAN_RESET, 0);
+	msleep(10);
+	gpio_set_value(EFIKA_WLAN_RESET, 1);
 }
 
 static void __init mx51_efikamx_timer_init(void)
@@ -350,15 +282,16 @@
 	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
 }
 
-static struct sys_timer mxc_timer = {
-	.init	= mx51_efikamx_timer_init,
+static struct sys_timer mx51_efikamx_timer = {
+	.init = mx51_efikamx_timer_init,
 };
 
 MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
 	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-	.init_machine =  mxc_board_init,
-	.timer = &mxc_timer,
+	.timer = &mx51_efikamx_timer,
+	.init_machine = mx51_efikamx_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
new file mode 100644
index 0000000..db04ce84
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <mach/ulpi.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+#include "efika.h"
+
+#define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
+#define EFIKASB_GREEN_LED	IMX_GPIO_NR(1, 3)
+#define EFIKASB_WHITE_LED	IMX_GPIO_NR(2, 25)
+#define EFIKASB_PCBID0		IMX_GPIO_NR(2, 28)
+#define EFIKASB_PCBID1		IMX_GPIO_NR(2, 29)
+#define EFIKASB_PWRKEY		IMX_GPIO_NR(2, 31)
+#define EFIKASB_LID		IMX_GPIO_NR(3, 14)
+#define EFIKASB_POWEROFF	IMX_GPIO_NR(4, 13)
+#define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
+
+#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+
+static iomux_v3_cfg_t mx51efikasb_pads[] = {
+	/* USB HOST2 */
+	MX51_PAD_EIM_D16__USBH2_DATA0,
+	MX51_PAD_EIM_D17__USBH2_DATA1,
+	MX51_PAD_EIM_D18__USBH2_DATA2,
+	MX51_PAD_EIM_D19__USBH2_DATA3,
+	MX51_PAD_EIM_D20__USBH2_DATA4,
+	MX51_PAD_EIM_D21__USBH2_DATA5,
+	MX51_PAD_EIM_D22__USBH2_DATA6,
+	MX51_PAD_EIM_D23__USBH2_DATA7,
+	MX51_PAD_EIM_A24__USBH2_CLK,
+	MX51_PAD_EIM_A25__USBH2_DIR,
+	MX51_PAD_EIM_A26__USBH2_STP,
+	MX51_PAD_EIM_A27__USBH2_NXT,
+
+	/* leds */
+	MX51_PAD_EIM_CS0__GPIO2_25,
+	MX51_PAD_GPIO1_3__GPIO1_3,
+
+	/* pcb id */
+	MX51_PAD_EIM_CS3__GPIO2_28,
+	MX51_PAD_EIM_CS4__GPIO2_29,
+
+	/* lid */
+	MX51_PAD_CSI1_VSYNC__GPIO3_14,
+
+	/* power key*/
+	MX51_PAD_PWRKEY,
+
+	/* wifi/bt button */
+	MX51_PAD_DI1_PIN12__GPIO3_1,
+
+	/* power off */
+	MX51_PAD_CSI2_VSYNC__GPIO4_13,
+
+	/* wdog reset */
+	MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
+
+	/* BT */
+	MX51_PAD_EIM_A17__GPIO2_11,
+};
+
+static int initialize_usbh2_port(struct platform_device *pdev)
+{
+	iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
+	iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
+
+	mxc_iomux_v3_setup_pad(usbh2gpio);
+	gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
+	gpio_direction_output(EFIKASB_USBH2_STP, 0);
+	msleep(1);
+	gpio_set_value(EFIKASB_USBH2_STP, 1);
+	msleep(1);
+
+	gpio_free(EFIKASB_USBH2_STP);
+	mxc_iomux_v3_setup_pad(usbh2stp);
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
+}
+
+static struct mxc_usbh_platform_data usbh2_config = {
+	.init   = initialize_usbh2_port,
+	.portsc = MXC_EHCI_MODE_ULPI,
+};
+
+static void __init mx51_efikasb_usb(void)
+{
+	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
+	if (usbh2_config.otg)
+		mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+}
+
+static struct gpio_led mx51_efikasb_leds[] = {
+	{
+		.name = "efikasb:green",
+		.default_trigger = "default-on",
+		.gpio = EFIKASB_GREEN_LED,
+		.active_low = 1,
+	},
+	{
+		.name = "efikasb:white",
+		.default_trigger = "caps",
+		.gpio = EFIKASB_WHITE_LED,
+	},
+};
+
+static struct gpio_led_platform_data mx51_efikasb_leds_data = {
+	.leds = mx51_efikasb_leds,
+	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
+};
+
+static struct platform_device mx51_efikasb_leds_device = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &mx51_efikasb_leds_data,
+	},
+};
+
+static struct gpio_keys_button mx51_efikasb_keys[] = {
+	{
+		.code = KEY_POWER,
+		.gpio = EFIKASB_PWRKEY,
+		.type = EV_PWR,
+		.desc = "Power Button",
+		.wakeup = 1,
+		.debounce_interval = 10, /* ms */
+	},
+	{
+		.code = SW_LID,
+		.gpio = EFIKASB_LID,
+		.type = EV_SW,
+		.desc = "Lid Switch",
+	},
+	{
+		/* SW_RFKILLALL vs KEY_RFKILL ? */
+		.code = SW_RFKILL_ALL,
+		.gpio = EFIKASB_RFKILL,
+		.type = EV_SW,
+		.desc = "rfkill",
+	},
+};
+
+static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
+	.buttons = mx51_efikasb_keys,
+	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
+};
+
+static struct regulator *pwgt1, *pwgt2;
+
+static void mx51_efikasb_power_off(void)
+{
+	gpio_set_value(EFIKA_USB_PHY_RESET, 0);
+
+	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+		regulator_disable(pwgt2);
+		regulator_disable(pwgt1);
+	}
+	gpio_direction_output(EFIKASB_POWEROFF, 1);
+}
+
+static int __init mx51_efikasb_power_init(void)
+{
+	if (machine_is_mx51_efikasb()) {
+		pwgt1 = regulator_get(NULL, "pwgt1");
+		pwgt2 = regulator_get(NULL, "pwgt2");
+		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+			regulator_enable(pwgt1);
+			regulator_enable(pwgt2);
+		}
+		gpio_request(EFIKASB_POWEROFF, "poweroff");
+		pm_power_off = mx51_efikasb_power_off;
+
+		regulator_has_full_constraints();
+	}
+
+	return 0;
+}
+late_initcall(mx51_efikasb_power_init);
+
+/* 01     R1.3 board
+   10     R2.0 board */
+static void __init mx51_efikasb_board_id(void)
+{
+	int id;
+
+	gpio_request(EFIKASB_PCBID0, "pcb id0");
+	gpio_direction_input(EFIKASB_PCBID0);
+	gpio_request(EFIKASB_PCBID1, "pcb id1");
+	gpio_direction_input(EFIKASB_PCBID1);
+
+	id = gpio_get_value(EFIKASB_PCBID0);
+	id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+
+	switch (id) {
+	default:
+		break;
+	case 1:
+		system_rev = 0x13;
+		break;
+	case 2:
+		system_rev = 0x20;
+		break;
+	}
+}
+
+static void __init efikasb_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
+					ARRAY_SIZE(mx51efikasb_pads));
+	efika_board_common_init();
+
+	mx51_efikasb_board_id();
+	mx51_efikasb_usb();
+	imx51_add_sdhci_esdhc_imx(1, NULL);
+
+	platform_device_register(&mx51_efikasb_leds_device);
+	imx51_add_gpio_keys(&mx51_efikasb_keys_data);
+
+}
+
+static void __init mx51_efikasb_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mx51_efikasb_timer = {
+	.init	= mx51_efikasb_timer_init,
+};
+
+MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_early = imx51_init_early,
+	.init_irq = mx51_init_irq,
+	.init_machine =  efikasb_board_init,
+	.timer = &mx51_efikasb_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index caee04c..7b5735c 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
  */
 
@@ -42,28 +42,24 @@
 #include "devices-imx53.h"
 
 static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_D10__UART1_TXD,
-	MX53_PAD_CSI0_D11__UART1_RXD,
-	MX53_PAD_ATA_DIOW__UART1_TXD,
-	MX53_PAD_ATA_DMACK__UART1_RXD,
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
 
-	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
-	MX53_PAD_ATA_DMARQ__UART2_TXD,
-	MX53_PAD_ATA_DIOR__UART2_RTS,
-	MX53_PAD_ATA_INTRQ__UART2_CTS,
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+	MX53_PAD_PATA_DIOR__UART2_RTS,
+	MX53_PAD_PATA_INTRQ__UART2_CTS,
 
-	MX53_PAD_ATA_CS_0__UART3_TXD,
-	MX53_PAD_ATA_CS_1__UART3_RXD,
-	MX53_PAD_ATA_DA_1__UART3_CTS,
-	MX53_PAD_ATA_DA_2__UART3_RTS,
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
 
-	MX53_PAD_EIM_D16__CSPI1_SCLK,
-	MX53_PAD_EIM_D17__CSPI1_MISO,
-	MX53_PAD_EIM_D18__CSPI1_MOSI,
+	MX53_PAD_EIM_D16__ECSPI1_SCLK,
+	MX53_PAD_EIM_D17__ECSPI1_MISO,
+	MX53_PAD_EIM_D18__ECSPI1_MOSI,
 
 	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO_2_30,
-	MX53_PAD_EIM_D19__GPIO_3_19,
+	MX53_PAD_EIM_EB2__GPIO2_30,
+	MX53_PAD_EIM_D19__GPIO3_19,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
@@ -72,9 +68,9 @@
 
 static inline void mx53_evk_init_uart(void)
 {
-	imx53_add_imx_uart(0, &mx53_evk_uart_pdata);
+	imx53_add_imx_uart(0, NULL);
 	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
+	imx53_add_imx_uart(2, NULL);
 }
 
 static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
@@ -139,6 +135,7 @@
 	spi_register_board_info(mx53_evk_spi_board_info,
 		ARRAY_SIZE(mx53_evk_spi_board_info));
 	imx53_add_ecspi(0, &mx53_evk_spi_data);
+	imx53_add_imx2_wdt(0, NULL);
 }
 
 static void __init mx53_evk_timer_init(void)
@@ -152,7 +149,8 @@
 
 MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.map_io = mx53_map_io,
+	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
-	.init_machine = mx53_evk_board_init,
 	.timer = &mx53_evk_timer,
+	.init_machine = mx53_evk_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index d1348e0..0a18f8d 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -39,33 +39,147 @@
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
-	MX53_PAD_CSI0_D10__UART1_TXD,
-	MX53_PAD_CSI0_D11__UART1_RXD,
-	MX53_PAD_ATA_DIOW__UART1_TXD,
-	MX53_PAD_ATA_DMACK__UART1_RXD,
-
-	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
-	MX53_PAD_ATA_DMARQ__UART2_TXD,
-	MX53_PAD_ATA_DIOR__UART2_RTS,
-	MX53_PAD_ATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_ATA_CS_0__UART3_TXD,
-	MX53_PAD_ATA_CS_1__UART3_RXD,
-	MX53_PAD_ATA_DA_1__UART3_CTS,
-	MX53_PAD_ATA_DA_2__UART3_RTS,
+	/* FEC */
+	MX53_PAD_FEC_MDC__FEC_MDC,
+	MX53_PAD_FEC_MDIO__FEC_MDIO,
+	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
+	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
+	/* FEC_nRST */
+	MX53_PAD_PATA_DA_0__GPIO7_6,
+	/* FEC_nINT */
+	MX53_PAD_PATA_DATA4__GPIO2_4,
+	/* AUDMUX5 */
+	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
+	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
+	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
+	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+	/* I2C2 */
+	MX53_PAD_KEY_COL3__I2C2_SCL,
+	MX53_PAD_KEY_ROW3__I2C2_SDA,
+	/* SD1 */
+	MX53_PAD_SD1_CMD__ESDHC1_CMD,
+	MX53_PAD_SD1_CLK__ESDHC1_CLK,
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD3 */
+	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
+	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
+	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
+	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
+	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
+	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
+	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
+	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
+	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
+	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
+	/* SD3_CD */
+	MX53_PAD_EIM_DA11__GPIO3_11,
+	/* SD3_WP */
+	MX53_PAD_EIM_DA12__GPIO3_12,
+	/* VGA */
+	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
+	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
+	/* DISPLB */
+	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
+	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
+	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
+	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
+	/* DISP0_POWER_EN */
+	MX53_PAD_EIM_D24__GPIO3_24,
+	/* DISP0 DET INT */
+	MX53_PAD_EIM_D31__GPIO3_31,
+	/* LVDS */
+	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
+	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
+	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
+	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
+	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
+	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
+	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
+	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
+	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
+	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
+	/* I2C1 */
+	MX53_PAD_CSI0_DAT8__I2C1_SDA,
+	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	/* UART1 */
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
+	/* CSI0 */
+	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
+	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
+	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
+	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
+	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
+	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
+	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
+	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
+	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
+	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
+	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
+	/* DISPLAY */
+	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
+	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
+	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
+	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
+	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
+	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
+	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
+	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
+	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
+	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
+	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
+	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
+	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
+	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
+	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
+	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
+	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
+	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
+	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
+	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
+	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
+	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
+	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
+	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
+	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
+	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
+	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
+	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
+	/* Audio CLK*/
+	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
+	/* PWM */
+	MX53_PAD_GPIO_1__PWM2_PWMO,
+	/* SPDIF */
+	MX53_PAD_GPIO_7__SPDIF_PLOCK,
+	MX53_PAD_GPIO_17__SPDIF_OUT1,
+	/* GPIO */
+	MX53_PAD_PATA_DA_1__GPIO7_7,
+	MX53_PAD_PATA_DA_2__GPIO7_8,
+	MX53_PAD_PATA_DATA5__GPIO2_5,
+	MX53_PAD_PATA_DATA6__GPIO2_6,
+	MX53_PAD_PATA_DATA14__GPIO2_14,
+	MX53_PAD_PATA_DATA15__GPIO2_15,
+	MX53_PAD_PATA_INTRQ__GPIO7_2,
+	MX53_PAD_EIM_WAIT__GPIO5_0,
+	MX53_PAD_NANDF_WP_B__GPIO6_9,
+	MX53_PAD_NANDF_RB0__GPIO6_10,
+	MX53_PAD_NANDF_CS1__GPIO6_14,
+	MX53_PAD_NANDF_CS2__GPIO6_15,
+	MX53_PAD_NANDF_CS3__GPIO6_16,
+	MX53_PAD_GPIO_5__GPIO1_5,
+	MX53_PAD_GPIO_16__GPIO7_11,
+	MX53_PAD_GPIO_8__GPIO1_8,
 };
 
-static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_loco_init_uart(void)
-{
-	imx53_add_imx_uart(0, &mx53_loco_uart_data);
-	imx53_add_imx_uart(1, &mx53_loco_uart_data);
-	imx53_add_imx_uart(2, &mx53_loco_uart_data);
-}
-
 static inline void mx53_loco_fec_reset(void)
 {
 	int ret;
@@ -85,13 +199,22 @@
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
+static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 static void __init mx53_loco_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
 					ARRAY_SIZE(mx53_loco_pads));
-	mx53_loco_init_uart();
+	imx53_add_imx_uart(0, NULL);
 	mx53_loco_fec_reset();
 	imx53_add_fec(&mx53_loco_fec_data);
+	imx53_add_imx2_wdt(0, NULL);
+	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
+	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
+	imx53_add_sdhci_esdhc_imx(0, NULL);
+	imx53_add_sdhci_esdhc_imx(2, NULL);
 }
 
 static void __init mx53_loco_timer_init(void)
@@ -105,7 +228,8 @@
 
 MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.map_io = mx53_map_io,
+	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
-	.init_machine = mx53_loco_board_init,
 	.timer = &mx53_loco_timer,
+	.init_machine = mx53_loco_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 7970f7a..31e1732 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -39,20 +39,19 @@
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_D10__UART1_TXD,
-	MX53_PAD_CSI0_D11__UART1_RXD,
-	MX53_PAD_ATA_DIOW__UART1_TXD,
-	MX53_PAD_ATA_DMACK__UART1_RXD,
+	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
+	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
 
-	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
-	MX53_PAD_ATA_DMARQ__UART2_TXD,
-	MX53_PAD_ATA_DIOR__UART2_RTS,
-	MX53_PAD_ATA_INTRQ__UART2_CTS,
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
 
-	MX53_PAD_ATA_CS_0__UART3_TXD,
-	MX53_PAD_ATA_CS_1__UART3_RXD,
-	MX53_PAD_ATA_DA_1__UART3_CTS,
-	MX53_PAD_ATA_DA_2__UART3_RTS,
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
+	MX53_PAD_PATA_DA_1__UART3_CTS,
+	MX53_PAD_PATA_DA_2__UART3_RTS,
+	/* I2C1 */
+	MX53_PAD_CSI0_DAT8__I2C1_SDA,
+	MX53_PAD_CSI0_DAT9__I2C1_SCL,
 };
 
 static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
@@ -61,8 +60,8 @@
 
 static inline void mx53_smd_init_uart(void)
 {
-	imx53_add_imx_uart(0, &mx53_smd_uart_data);
-	imx53_add_imx_uart(1, &mx53_smd_uart_data);
+	imx53_add_imx_uart(0, NULL);
+	imx53_add_imx_uart(1, NULL);
 	imx53_add_imx_uart(2, &mx53_smd_uart_data);
 }
 
@@ -85,6 +84,10 @@
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
+static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 static void __init mx53_smd_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
@@ -92,6 +95,8 @@
 	mx53_smd_init_uart();
 	mx53_smd_fec_reset();
 	imx53_add_fec(&mx53_smd_fec_data);
+	imx53_add_imx2_wdt(0, NULL);
+	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
 }
 
 static void __init mx53_smd_timer_init(void)
@@ -105,7 +110,8 @@
 
 MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.map_io = mx53_map_io,
+	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
-	.init_machine = mx53_smd_board_init,
 	.timer = &mx53_smd_timer,
+	.init_machine = mx53_smd_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 0a19e75..652ace4 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -42,6 +42,9 @@
 static struct clk emi_fast_clk;
 static struct clk ipu_clk;
 static struct clk mipi_hsc1_clk;
+static struct clk esdhc1_clk;
+static struct clk esdhc2_clk;
+static struct clk esdhc3_mx53_clk;
 
 #define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
 
@@ -867,10 +870,6 @@
 	.parent = &ckil_clk,
 };
 
-static struct clk kpp_clk = {
-	.id = 0,
-};
-
 static struct clk dummy_clk = {
 	.id = 0,
 };
@@ -1147,10 +1146,80 @@
 CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
 CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
 
+/* mx51 specific */
 CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
 CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
 CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
 
+static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1);
+	if (parent == &esdhc1_clk)
+		reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
+	else if (parent == &esdhc2_clk)
+		reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
+	else
+		return -EINVAL;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1);
+	if (parent == &esdhc1_clk)
+		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
+	else if (parent == &esdhc2_clk)
+		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
+	else
+		return -EINVAL;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+/* mx53 specific */
+static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1);
+	if (parent == &esdhc1_clk)
+		reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
+	else if (parent == &esdhc3_mx53_clk)
+		reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
+	else
+		return -EINVAL;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
+CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
+CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
+
+static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1);
+	if (parent == &esdhc1_clk)
+		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
+	else if (parent == &esdhc3_mx53_clk)
+		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
+	else
+		return -EINVAL;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
 #define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
 	static struct clk name = {					\
 		.id		= i,					\
@@ -1255,9 +1324,62 @@
 	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
 DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
 	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+
+/* mx51 specific */
 DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
 	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
 
+static struct clk esdhc3_clk = {
+	.id = 2,
+	.parent = &esdhc1_clk,
+	.set_parent = clk_esdhc3_set_parent,
+	.enable_reg = MXC_CCM_CCGR3,
+	.enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
+	.enable  = _clk_max_enable,
+	.disable = _clk_max_disable,
+	.secondary = &esdhc3_ipg_clk,
+};
+static struct clk esdhc4_clk = {
+	.id = 3,
+	.parent = &esdhc1_clk,
+	.set_parent = clk_esdhc4_set_parent,
+	.enable_reg = MXC_CCM_CCGR3,
+	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
+	.enable  = _clk_max_enable,
+	.disable = _clk_max_disable,
+	.secondary = &esdhc4_ipg_clk,
+};
+
+/* mx53 specific */
+static struct clk esdhc2_mx53_clk = {
+	.id = 2,
+	.parent = &esdhc1_clk,
+	.set_parent = clk_esdhc2_mx53_set_parent,
+	.enable_reg = MXC_CCM_CCGR3,
+	.enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
+	.enable  = _clk_max_enable,
+	.disable = _clk_max_disable,
+	.secondary = &esdhc3_ipg_clk,
+};
+
+DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
+	clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
+
+static struct clk esdhc4_mx53_clk = {
+	.id = 3,
+	.parent = &esdhc1_clk,
+	.set_parent = clk_esdhc4_mx53_set_parent,
+	.enable_reg = MXC_CCM_CCGR3,
+	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
+	.enable  = _clk_max_enable,
+	.disable = _clk_max_disable,
+	.secondary = &esdhc4_ipg_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1302,7 +1424,7 @@
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
 	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
@@ -1316,6 +1438,8 @@
 	_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_clk)
 	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
 	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
 	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
@@ -1336,10 +1460,14 @@
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk)
 	_REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk)
 	_REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk)
 	_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
 };
 
 static void clk_tree_init(void)
@@ -1427,6 +1555,14 @@
 	mx53_revision();
 	clk_disable(&iim_clk);
 
+	/* Set SDHC parents to be PLL2 */
+	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
+	clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
+
+	/* set SDHC root clock as 200MHZ*/
+	clk_set_rate(&esdhc1_clk, 200000000);
+	clk_set_rate(&esdhc3_mx53_clk, 200000000);
+
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
 		MX53_INT_GPT);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index d40671d..df46b5e 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -78,11 +78,16 @@
 	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
 	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
 
-	if (rev == 0x0)
+	switch (rev) {
+	case 0x0:
 		return IMX_CHIP_REVISION_1_0;
-	else if (rev == 0x10)
+	case 0x2:
 		return IMX_CHIP_REVISION_2_0;
-	return 0;
+	case 0x3:
+		return IMX_CHIP_REVISION_2_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
 }
 
 /*
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
index b462c22..87c0c58 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -217,9 +217,12 @@
 #define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
 #define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
 #define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL	(0x1 << 19)
 #define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
 #define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
 #define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK		(0x3 << 16)
 #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
 #define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
 #define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
@@ -271,6 +274,10 @@
 #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
 #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
 #define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK	(0x7 << 19)
 #define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
 #define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
 #define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-imx50.h
similarity index 77%
rename from arch/arm/mach-mx5/devices-mx50.h
rename to arch/arm/mach-mx5/devices-imx50.h
index 98ab074..c9e4282 100644
--- a/arch/arm/mach-mx5/devices-mx50.h
+++ b/arch/arm/mach-mx5/devices-imx50.h
@@ -24,3 +24,11 @@
 extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
 #define imx50_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
+
+extern const struct imx_fec_data imx50_fec_data __initconst;
+#define imx50_add_fec(pdata)	\
+	imx_add_fec(&imx50_fec_data, pdata)
+
+extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst;
+#define imx50_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 8639735..9251008 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -29,3 +29,7 @@
 extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
 #define imx53_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
+
+extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
+#define imx53_add_imx2_wdt(id, pdata)	\
+	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h
new file mode 100644
index 0000000..014aa98
--- /dev/null
+++ b/arch/arm/mach-mx5/efika.h
@@ -0,0 +1,10 @@
+#ifndef _EFIKA_H
+#define _EFIKA_H
+
+#define EFIKA_WLAN_EN		IMX_GPIO_NR(2, 16)
+#define EFIKA_WLAN_RESET	IMX_GPIO_NR(2, 10)
+#define EFIKA_USB_PHY_RESET	IMX_GPIO_NR(2, 9)
+
+void __init efika_board_common_init(void);
+
+#endif
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
new file mode 100644
index 0000000..7ce12c8
--- /dev/null
+++ b/arch/arm/mach-mx5/ehci.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define MXC_OTG_OFFSET			0
+#define MXC_H1_OFFSET			0x200
+#define MXC_H2_OFFSET			0x400
+
+/* USB_CTRL */
+#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
+#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+
+/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
+
+/* USBH2CTRL */
+#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
+
+#define MXC_USBCMD_OFFSET		0x140
+
+/* USBCMD */
+#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
+
+int mx51_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+	void __iomem *usb_base;
+	void __iomem *usbotg_base;
+	void __iomem *usbother_base;
+	int ret = 0;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base) {
+		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	switch (port) {
+	case 0:	/* OTG port */
+		usbotg_base = usb_base + MXC_OTG_OFFSET;
+		break;
+	case 1:	/* Host 1 port */
+		usbotg_base = usb_base + MXC_H1_OFFSET;
+		break;
+	case 2: /* Host 2 port */
+		usbotg_base = usb_base + MXC_H2_OFFSET;
+		break;
+	default:
+		printk(KERN_ERR"%s no such port %d\n", __func__, port);
+		ret = -ENOENT;
+		goto error;
+	}
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	switch (port) {
+	case 0:	/*OTG port */
+		if (flags & MXC_EHCI_INTERNAL_PHY) {
+			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+				/* OC/USBPWR is not used */
+				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			} else {
+				/* OC/USBPWR is used */
+				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			}
+			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED)
+				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
+			else
+				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MXC_OTG_UCTRL_OPM_BIT;
+			else
+				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+		}
+		break;
+	case 1:	/* Host 1 */
+		/*Host ULPI */
+		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+		else
+			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+
+		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
+		else
+			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
+		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
+		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
+			/* Interrupt Threshold Control:Immediate (no threshold) */
+			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
+		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
+		break;
+	case 2: /* Host 2 ULPI */
+		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+		else
+			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
+		break;
+	}
+
+error:
+	iounmap(usb_base);
+	return ret;
+}
+
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
index 8c6540e..b9c363b 100644
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -26,6 +26,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
 
 /*
  * Define the MX50 memory map.
@@ -44,16 +46,27 @@
  */
 void __init mx50_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
 	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
 }
 
-int imx50_register_gpios(void);
+void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx50_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+};
 
 void __init mx50_init_irq(void)
 {
 	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-	imx50_register_gpios();
+	mxc_gpio_init(imx50_gpio_ports,	ARRAY_SIZE(imx50_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 457f9f9..ff55730 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -47,18 +47,26 @@
  */
 void __init mx51_map_io(void)
 {
+	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
+}
+
+void __init imx51_init_early(void)
+{
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
 }
 
 void __init mx53_map_io(void)
 {
+	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx53_init_early(void)
+{
 	mxc_set_cpu_type(MXC_CPU_MX53);
 	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR));
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
 int imx51_register_gpios(void);
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
new file mode 100644
index 0000000..51a67fc
--- /dev/null
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -0,0 +1,636 @@
+/*
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <mach/ulpi.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+#include "efika.h"
+#include "cpu_op-mx51.h"
+
+#define MX51_USB_CTRL_1_OFFSET          0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+
+#define EFIKAMX_USB_HUB_RESET	IMX_GPIO_NR(1, 5)
+#define EFIKAMX_USBH1_STP	IMX_GPIO_NR(1, 27)
+
+#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
+#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
+
+#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
+
+static iomux_v3_cfg_t mx51efika_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+	/* SD/MMC WP/CD */
+	MX51_PAD_GPIO1_0__SD1_CD,
+	MX51_PAD_GPIO1_1__SD1_WP,
+	MX51_PAD_GPIO1_7__SD2_WP,
+	MX51_PAD_GPIO1_8__SD2_CD,
+
+	/* spi */
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
+	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+	MX51_PAD_GPIO1_6__GPIO1_6,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+
+	/* USB HUB RESET */
+	MX51_PAD_GPIO1_5__GPIO1_5,
+
+	/* WLAN */
+	MX51_PAD_EIM_A22__GPIO2_16,
+	MX51_PAD_EIM_A16__GPIO2_10,
+
+	/* USB PHY RESET */
+	MX51_PAD_EIM_D27__GPIO2_9,
+};
+
+/* Serial ports */
+static const struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
+	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init   = initialize_otg_port,
+	.portsc = MXC_EHCI_UTMI_16BIT,
+};
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+	iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *socregs_base;
+
+	mxc_iomux_v3_setup_pad(usbh1gpio);
+	gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
+	gpio_direction_output(EFIKAMX_USBH1_STP, 0);
+	msleep(1);
+	gpio_set_value(EFIKAMX_USBH1_STP, 1);
+	msleep(1);
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+	/* The clock for the USBH1 ULPI port will come externally */
+	/* from the PHY. */
+	v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
+			socregs_base + MX51_USB_CTRL_1_OFFSET);
+
+	iounmap(usb_base);
+
+	gpio_free(EFIKAMX_USBH1_STP);
+	mxc_iomux_v3_setup_pad(usbh1stp);
+
+	mdelay(10);
+
+	return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+}
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init   = initialize_usbh1_port,
+	.portsc = MXC_EHCI_MODE_ULPI,
+};
+
+static void mx51_efika_hubreset(void)
+{
+	gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
+	gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
+	msleep(1);
+	gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
+	msleep(1);
+	gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
+}
+
+static void __init mx51_efika_usb(void)
+{
+	mx51_efika_hubreset();
+
+	/* pulling it low, means no USB at all... */
+	gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
+	gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
+	msleep(1);
+	gpio_set_value(EFIKA_USB_PHY_RESET, 1);
+
+	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
+
+	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	if (usbh1_config.otg)
+		mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+}
+
+static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
+	{
+	 .name = "u-boot",
+	 .offset = 0,
+	 .size = SZ_256K,
+	},
+	{
+	  .name = "config",
+	  .offset = MTDPART_OFS_APPEND,
+	  .size = SZ_64K,
+	},
+};
+
+static struct flash_platform_data mx51_efika_spi_flash_data = {
+	.name		= "spi_flash",
+	.parts		= mx51_efika_spi_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(mx51_efika_spi_nor_partitions),
+	.type		= "sst25vf032b",
+};
+
+static struct regulator_consumer_supply sw1_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_consumer_supply vdig_consumers[] = {
+	/* sgtl5000 */
+	REGULATOR_SUPPLY("VDDA", "1-000a"),
+	REGULATOR_SUPPLY("VDDD", "1-000a"),
+};
+
+static struct regulator_consumer_supply vvideo_consumers[] = {
+	/* sgtl5000 */
+	REGULATOR_SUPPLY("VDDIO", "1-000a"),
+};
+
+static struct regulator_consumer_supply vsd_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"),
+	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"),
+};
+
+static struct regulator_consumer_supply pwgt1_consumer[] = {
+	{
+		.supply = "pwgt1",
+	}
+};
+
+static struct regulator_consumer_supply pwgt2_consumer[] = {
+	{
+		.supply = "pwgt2",
+	}
+};
+
+static struct regulator_consumer_supply coincell_consumer[] = {
+	{
+		.supply = "coincell",
+	}
+};
+
+static struct regulator_init_data sw1_init = {
+	.constraints = {
+		.name = "SW1",
+		.min_uV = 600000,
+		.max_uV = 1375000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+		.state_mem = {
+			.uV = 850000,
+			.mode = REGULATOR_MODE_NORMAL,
+			.enabled = 1,
+		},
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+	.consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+	.constraints = {
+		.name = "SW2",
+		.min_uV = 900000,
+		.max_uV = 1850000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+		.state_mem = {
+			.uV = 950000,
+			.mode = REGULATOR_MODE_NORMAL,
+			.enabled = 1,
+		},
+	}
+};
+
+static struct regulator_init_data sw3_init = {
+	.constraints = {
+		.name = "SW3",
+		.min_uV = 1100000,
+		.max_uV = 1850000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4_init = {
+	.constraints = {
+		.name = "SW4",
+		.min_uV = 1100000,
+		.max_uV = 1850000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data viohi_init = {
+	.constraints = {
+		.name = "VIOHI",
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb_init = {
+	.constraints = {
+		.name = "VUSB",
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data swbst_init = {
+	.constraints = {
+		.name = "SWBST",
+	}
+};
+
+static struct regulator_init_data vdig_init = {
+	.constraints = {
+		.name = "VDIG",
+		.min_uV = 1050000,
+		.max_uV = 1800000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
+	.consumer_supplies = vdig_consumers,
+};
+
+static struct regulator_init_data vpll_init = {
+	.constraints = {
+		.name = "VPLL",
+		.min_uV = 1050000,
+		.max_uV = 1800000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb2_init = {
+	.constraints = {
+		.name = "VUSB2",
+		.min_uV = 2400000,
+		.max_uV = 2775000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vvideo_init = {
+	.constraints = {
+		.name = "VVIDEO",
+		.min_uV = 2775000,
+		.max_uV = 2775000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
+	.consumer_supplies = vvideo_consumers,
+};
+
+static struct regulator_init_data vaudio_init = {
+	.constraints = {
+		.name = "VAUDIO",
+		.min_uV = 2300000,
+		.max_uV = 3000000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vsd_init = {
+	.constraints = {
+		.name = "VSD",
+		.min_uV = 1800000,
+		.max_uV = 3150000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
+	.consumer_supplies = vsd_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+	.constraints = {
+		.name = "VCAM",
+		.min_uV = 2500000,
+		.max_uV = 3000000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen1_init = {
+	.constraints = {
+		.name = "VGEN1",
+		.min_uV = 1200000,
+		.max_uV = 3150000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen2_init = {
+	.constraints = {
+		.name = "VGEN2",
+		.min_uV = 1200000,
+		.max_uV = 3150000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen3_init = {
+	.constraints = {
+		.name = "VGEN3",
+		.min_uV = 1800000,
+		.max_uV = 2900000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data gpo1_init = {
+	.constraints = {
+		.name = "GPO1",
+	}
+};
+
+static struct regulator_init_data gpo2_init = {
+	.constraints = {
+		.name = "GPO2",
+	}
+};
+
+static struct regulator_init_data gpo3_init = {
+	.constraints = {
+		.name = "GPO3",
+	}
+};
+
+static struct regulator_init_data gpo4_init = {
+	.constraints = {
+		.name = "GPO4",
+	}
+};
+
+static struct regulator_init_data pwgt1_init = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.boot_on        = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
+	.consumer_supplies = pwgt1_consumer,
+};
+
+static struct regulator_init_data pwgt2_init = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.boot_on        = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
+	.consumer_supplies = pwgt2_consumer,
+};
+
+static struct regulator_init_data vcoincell_init = {
+	.constraints = {
+		.name = "COINCELL",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.valid_ops_mask =
+			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
+	.consumer_supplies = coincell_consumer,
+};
+
+static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
+	{ .id = MC13892_SW1,		.init_data =  &sw1_init },
+	{ .id = MC13892_SW2,		.init_data =  &sw2_init },
+	{ .id = MC13892_SW3,		.init_data =  &sw3_init },
+	{ .id = MC13892_SW4,		.init_data =  &sw4_init },
+	{ .id = MC13892_SWBST,		.init_data =  &swbst_init },
+	{ .id = MC13892_VIOHI,		.init_data =  &viohi_init },
+	{ .id = MC13892_VPLL,		.init_data =  &vpll_init },
+	{ .id = MC13892_VDIG,		.init_data =  &vdig_init },
+	{ .id = MC13892_VSD,		.init_data =  &vsd_init },
+	{ .id = MC13892_VUSB2,		.init_data =  &vusb2_init },
+	{ .id = MC13892_VVIDEO,		.init_data =  &vvideo_init },
+	{ .id = MC13892_VAUDIO,		.init_data =  &vaudio_init },
+	{ .id = MC13892_VCAM,		.init_data =  &vcam_init },
+	{ .id = MC13892_VGEN1,		.init_data =  &vgen1_init },
+	{ .id = MC13892_VGEN2,		.init_data =  &vgen2_init },
+	{ .id = MC13892_VGEN3,		.init_data =  &vgen3_init },
+	{ .id = MC13892_VUSB,		.init_data =  &vusb_init },
+	{ .id = MC13892_GPO1,		.init_data =  &gpo1_init },
+	{ .id = MC13892_GPO2,		.init_data =  &gpo2_init },
+	{ .id = MC13892_GPO3,		.init_data =  &gpo3_init },
+	{ .id = MC13892_GPO4,		.init_data =  &gpo4_init },
+	{ .id = MC13892_PWGT1SPI,	.init_data = &pwgt1_init },
+	{ .id = MC13892_PWGT2SPI,	.init_data = &pwgt2_init },
+	{ .id = MC13892_VCOINCELL,	.init_data = &vcoincell_init },
+};
+
+static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+	.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+	.regulators = mx51_efika_regulators,
+};
+
+static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &mx51_efika_spi_flash_data,
+		.irq = -1,
+	},
+	{
+		.modalias = "mc13892",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &mx51_efika_mc13892_data,
+		.irq = gpio_to_irq(EFIKAMX_PMIC),
+	},
+};
+
+static int mx51_efika_spi_cs[] = {
+	EFIKAMX_SPI_CS0,
+	EFIKAMX_SPI_CS1,
+};
+
+static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
+	.chipselect     = mx51_efika_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
+};
+
+void __init efika_board_common_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
+					ARRAY_SIZE(mx51efika_pads));
+	imx51_add_imx_uart(0, &uart_pdata);
+	mx51_efika_usb();
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+
+	/* FIXME: comes from original code. check this. */
+	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
+		sw2_init.constraints.state_mem.uV = 1100000;
+	else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
+		sw2_init.constraints.state_mem.uV = 1250000;
+		sw1_init.constraints.state_mem.uV = 1000000;
+	}
+	if (machine_is_mx51_efikasb())
+		vgen1_init.constraints.max_uV = 1200000;
+
+	gpio_request(EFIKAMX_PMIC, "pmic irq");
+	gpio_direction_input(EFIKAMX_PMIC);
+	spi_register_board_info(mx51_efika_spi_board_info,
+		ARRAY_SIZE(mx51_efika_spi_board_info));
+	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
+
+#if defined(CONFIG_CPU_FREQ_IMX)
+	get_cpu_op = mx51_get_cpu_op;
+#endif
+}
+
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
index 405d9b1..66fc41c 100644
--- a/arch/arm/mach-mxc91231/iomux.c
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -50,7 +50,7 @@
 /*
  * set the mode for a IOMUX pin.
  */
-int mxc_iomux_mode(const unsigned int pin_mode)
+int mxc_iomux_mode(unsigned int pin_mode)
 {
 	u32 side, field, l, mode, ret = 0;
 	void __iomem *reg;
@@ -114,7 +114,7 @@
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
  */
-int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
 {
 	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
 	if (pad >= (PIN_MAX + 1)) {
@@ -134,10 +134,10 @@
 }
 EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 	int ret = -EINVAL;
 
@@ -155,7 +155,7 @@
 }
 EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
-void mxc_iomux_release_pin(const unsigned int pin_mode)
+void mxc_iomux_release_pin(unsigned int pin_mode)
 {
 	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
 
@@ -164,9 +164,9 @@
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 
 	for (i = 0; i < count; i++) {
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 395d83b..f31a45e 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -53,9 +53,10 @@
 };
 
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
-	.map_io		= mxc91231_map_io,
-	.init_irq	= mxc91231_init_irq,
-	.timer		= &zn5_timer,
-	.init_machine	= zn5_init,
+	.boot_params = MXC91231_PHYS_OFFSET + 0x100,
+	.map_io = mxc91231_map_io,
+	.init_early = mxc91231_init_early,
+	.init_irq = mxc91231_init_irq,
+	.timer = &zn5_timer,
+	.init_machine = zn5_init,
 MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 7652c30..a77f6da 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -45,11 +45,14 @@
  */
 void __init mxc91231_map_io(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MXC91231);
-
 	iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
 }
 
+void __init mxc91231_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MXC91231);
+}
+
 int mxc91231_register_gpios(void);
 
 void __init mxc91231_init_irq(void)
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 8bfc8df..4f6f174 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -2,13 +2,18 @@
 
 source "arch/arm/mach-mxs/devices/Kconfig"
 
+config MXS_OCOTP
+	bool
+
 config SOC_IMX23
 	bool
 	select CPU_ARM926T
+	select HAVE_PWM
 
 config SOC_IMX28
 	bool
 	select CPU_ARM926T
+	select HAVE_PWM
 
 comment "MXS platforms:"
 
@@ -16,6 +21,8 @@
 	bool "Support MX23EVK Platform"
 	select SOC_IMX23
 	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_MXSFB
 	default y
 	help
 	  Include support for MX23EVK platform. This includes specific
@@ -25,10 +32,27 @@
 	bool "Support MX28EVK Platform"
 	select SOC_IMX28
 	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
+	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_OCOTP
 	default y
 	help
 	  Include support for MX28EVK platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MODULE_TX28
+	bool
+	select SOC_IMX28
+	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_FEC
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_PWM
+
+config MACH_TX28
+	bool "Ka-Ro TX28 module"
+	select MODULE_TX28
+
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 39d3f9c..2f1f614 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,10 +1,15 @@
 # Common support
 obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
 
+obj-$(CONFIG_MXS_OCOTP) += ocotp.o
+obj-$(CONFIG_PM) += pm.o
+
 obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
 obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
 
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MODULE_TX28) += module-tx28.o
+obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 
 obj-y += devices/
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index ca72a05..d133c7f 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -442,11 +442,18 @@
 	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
 	/* for amba-pl011 driver */
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
+	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
+	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
+	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
 	_REGISTER_CLOCK(NULL, "usb", usb_clk)
 	_REGISTER_CLOCK(NULL, "audio", audio_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
+	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
 };
 
 static int clk_misc_init(void)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index fd1c4c5..5e489a2 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -609,17 +609,30 @@
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
 	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
+	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk)
+	_REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk)
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
-	_REGISTER_CLOCK(NULL, "xclk", xbus_clk)
-	_REGISTER_CLOCK(NULL, "can0", can0_clk)
-	_REGISTER_CLOCK(NULL, "can1", can1_clk)
+	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
+	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
 	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
 	_REGISTER_CLOCK(NULL, "usb1", usb1_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk)
 	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
 };
 
 static int clk_misc_init(void)
@@ -737,6 +750,8 @@
 	clk_enable(&emi_clk);
 	clk_enable(&uart_clk);
 
+	clk_set_parent(&lcdif_clk, &ref_pix_clk);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 1256788..c7e14f4 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -10,7 +10,18 @@
  */
 #include <mach/mx23.h>
 #include <mach/devices-common.h>
+#include <mach/mxsfb.h>
 
 extern const struct amba_device mx23_duart_device __initconst;
 #define mx23_add_duart() \
 	mxs_add_duart(&mx23_duart_device)
+
+extern const struct mxs_auart_data mx23_auart_data[] __initconst;
+#define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])
+#define mx23_add_auart0()		mx23_add_auart(0)
+#define mx23_add_auart1()		mx23_add_auart(1)
+
+#define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
+
+struct platform_device *__init mx23_add_mxsfb(
+		const struct mxsfb_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 33773a6..9d08555 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -10,11 +10,34 @@
  */
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
+#include <mach/mxsfb.h>
 
 extern const struct amba_device mx28_duart_device __initconst;
 #define mx28_add_duart() \
 	mxs_add_duart(&mx28_duart_device)
 
+extern const struct mxs_auart_data mx28_auart_data[] __initconst;
+#define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])
+#define mx28_add_auart0()		mx28_add_auart(0)
+#define mx28_add_auart1()		mx28_add_auart(1)
+#define mx28_add_auart2()		mx28_add_auart(2)
+#define mx28_add_auart3()		mx28_add_auart(3)
+#define mx28_add_auart4()		mx28_add_auart(4)
+
 extern const struct mxs_fec_data mx28_fec_data[] __initconst;
 #define mx28_add_fec(id, pdata) \
 	mxs_add_fec(&mx28_fec_data[id], pdata)
+
+extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
+#define mx28_add_flexcan(id, pdata)	\
+	mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
+#define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
+#define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
+
+extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
+#define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
+
+#define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
+
+struct platform_device *__init mx28_add_mxsfb(
+		const struct mxsfb_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index c20d547..cfdb6b2 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -66,6 +66,8 @@
 	ret = platform_device_add(pdev);
 	if (ret) {
 err:
+		if (dmamask)
+			kfree(pdev->dev.dma_mask);
 		platform_device_put(pdev);
 		return ERR_PTR(ret);
 	}
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index cf7dc1a..1451ad06 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -2,5 +2,21 @@
 	bool
 	select ARM_AMBA
 
+config MXS_HAVE_PLATFORM_AUART
+	bool
+
 config MXS_HAVE_PLATFORM_FEC
 	bool
+
+config MXS_HAVE_PLATFORM_FLEXCAN
+	select HAVE_CAN_FLEXCAN if CAN
+	bool
+
+config MXS_HAVE_PLATFORM_MXS_I2C
+	bool
+
+config MXS_HAVE_PLATFORM_MXS_PWM
+	bool
+
+config MXS_HAVE_PLATFORM_MXSFB
+	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index d0a09f6..0d9bea3 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -1,2 +1,8 @@
 obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
+obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c
new file mode 100644
index 0000000..796606c
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-auart.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_auart_data_entry_single(soc, _id, hwid)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _AUART ## hwid ## _BASE_ADDR,		\
+		.irq = soc ## _INT_AUART ## hwid,			\
+	}
+
+#define mxs_auart_data_entry(soc, _id, hwid)				\
+	[_id] = mxs_auart_data_entry_single(soc, _id, hwid)
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_auart_data mx23_auart_data[] __initconst = {
+#define mx23_auart_data_entry(_id, hwid)				\
+	mxs_auart_data_entry(MX23, _id, hwid)
+	mx23_auart_data_entry(0, 1),
+	mx23_auart_data_entry(1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_auart_data mx28_auart_data[] __initconst = {
+#define mx28_auart_data_entry(_id)					\
+	mxs_auart_data_entry(MX28, _id, _id)
+	mx28_auart_data_entry(0),
+	mx28_auart_data_entry(1),
+	mx28_auart_data_entry(2),
+	mx28_auart_data_entry(3),
+	mx28_auart_data_entry(4),
+};
+#endif
+
+struct platform_device *__init mxs_add_auart(
+		const struct mxs_auart_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device_dmamask("mxs-auart", data->id,
+					res, ARRAY_SIZE(res), NULL, 0,
+					DMA_BIT_MASK(32));
+}
+
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
new file mode 100644
index 0000000..295c442
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-dma.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+static struct platform_device *__init mxs_add_dma(const char *devid,
+						resource_size_t base)
+{
+	struct resource res[] = {
+		{
+			.start = base,
+			.end = base + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}
+	};
+
+	return mxs_add_platform_device_dmamask(devid, -1,
+				res, ARRAY_SIZE(res), NULL, 0,
+				DMA_BIT_MASK(32));
+}
+
+static int __init mxs_add_mxs_dma(void)
+{
+	char *apbh = "mxs-dma-apbh";
+	char *apbx = "mxs-dma-apbx";
+
+	if (cpu_is_mx23()) {
+		mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR);
+		mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR);
+	}
+
+	if (cpu_is_mx28()) {
+		mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR);
+		mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR);
+	}
+
+	return 0;
+}
+arch_initcall(mxs_add_mxs_dma);
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
index c42dff7..9859cf28 100644
--- a/arch/arm/mach-mxs/devices/platform-fec.c
+++ b/arch/arm/mach-mxs/devices/platform-fec.c
@@ -45,6 +45,7 @@
 		},
 	};
 
-	return mxs_add_platform_device("imx28-fec", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return mxs_add_platform_device_dmamask("imx28-fec", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c
new file mode 100644
index 0000000..43a6b4b
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-flexcan.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2010, 2011 Pengutronix,
+ *                          Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_CAN ## _hwid,			\
+	}
+
+#define mxs_flexcan_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
+#define mx28_flexcan_data_entry(_id, _hwid)				\
+	mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
+	mx28_flexcan_data_entry(0, 0),
+	mx28_flexcan_data_entry(1, 1),
+};
+#endif /* ifdef CONFIG_SOC_IMX28 */
+
+struct platform_device *__init mxs_add_flexcan(
+		const struct mxs_flexcan_data *data,
+		const struct flexcan_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("flexcan", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
new file mode 100644
index 0000000..eab3a06
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_i2c_data_entry_single(soc, _id)				\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _I2C ## _id ## _BASE_ADDR,		\
+		.errirq = soc ## _INT_I2C ## _id ## _ERROR,		\
+		.dmairq = soc ## _INT_I2C ## _id ## _DMA,		\
+	}
+
+#define mxs_i2c_data_entry(soc, _id)					\
+	[_id] = mxs_i2c_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
+	mxs_i2c_data_entry(MX28, 0),
+	mxs_i2c_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->errirq,
+			.end = data->errirq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dmairq,
+			.end = data->dmairq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-i2c", data->id, res,
+					ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
new file mode 100644
index 0000000..680f5a9
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
+{
+	struct resource res = {
+		.flags = IORESOURCE_MEM,
+	};
+
+	res.start = iobase + 0x10 + 0x20 * id;
+	res.end = res.start + 0x1f;
+
+	return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
new file mode 100644
index 0000000..bf72c9b
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+#include <mach/mxsfb.h>
+
+#ifdef CONFIG_SOC_IMX23
+struct platform_device *__init mx23_add_mxsfb(
+		const struct mxsfb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = MX23_LCDIF_BASE_ADDR,
+			.end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	return mxs_add_platform_device_dmamask("imx23-fb", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
+#endif /* ifdef CONFIG_SOC_IMX23 */
+
+#ifdef CONFIG_SOC_IMX28
+struct platform_device *__init mx28_add_mxsfb(
+		const struct mxsfb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = MX28_LCDIF_BASE_ADDR,
+			.end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	return mxs_add_platform_device_dmamask("imx28-fb", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
+#endif /* ifdef CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
index cb0c0e8..5120ab5 100644
--- a/arch/arm/mach-mxs/gpio.c
+++ b/arch/arm/mach-mxs/gpio.c
@@ -182,6 +182,7 @@
 }
 
 static struct irq_chip gpio_irq_chip = {
+	.name = "mxs gpio",
 	.ack = mxs_gpio_ack_irq,
 	.mask = mxs_gpio_mask_irq,
 	.unmask = mxs_gpio_unmask_irq,
@@ -289,39 +290,42 @@
 	return 0;
 }
 
-#define DEFINE_MXS_GPIO_PORT(soc, _id)					\
+#define MX23_GPIO_BASE	MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
+#define MX28_GPIO_BASE	MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
+
+#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id)				\
 	{								\
 		.chip.label = "gpio-" #_id,				\
 		.id = _id,						\
-		.irq = soc ## _INT_GPIO ## _id,				\
-		.base = soc ## _IO_ADDRESS(				\
-				soc ## _PINCTRL ## _BASE_ADDR),		\
+		.irq = _irq,						\
+		.base = _base,						\
 		.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32,	\
 	}
 
-#define DEFINE_REGISTER_FUNCTION(prefix)				\
-int __init prefix ## _register_gpios(void)				\
-{									\
-	return mxs_gpio_init(prefix ## _gpio_ports,			\
-			ARRAY_SIZE(prefix ## _gpio_ports));		\
-}
-
 #ifdef CONFIG_SOC_IMX23
 static struct mxs_gpio_port mx23_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX23, 0),
-	DEFINE_MXS_GPIO_PORT(MX23, 1),
-	DEFINE_MXS_GPIO_PORT(MX23, 2),
+	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
+	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
+	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
 };
-DEFINE_REGISTER_FUNCTION(mx23)
+
+int __init mx23_register_gpios(void)
+{
+	return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
+}
 #endif
 
 #ifdef CONFIG_SOC_IMX28
 static struct mxs_gpio_port mx28_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX28, 0),
-	DEFINE_MXS_GPIO_PORT(MX28, 1),
-	DEFINE_MXS_GPIO_PORT(MX28, 2),
-	DEFINE_MXS_GPIO_PORT(MX28, 3),
-	DEFINE_MXS_GPIO_PORT(MX28, 4),
+	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
+	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
+	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
+	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
+	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
 };
-DEFINE_REGISTER_FUNCTION(mx28)
+
+int __init mx28_register_gpios(void)
+{
+	return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
+}
 #endif
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 59133eb..635bb5d 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -13,6 +13,7 @@
 
 struct clk;
 
+extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
 extern void mxs_timer_init(struct clk *, int);
 
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 6c3d1a1..71f2448 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -30,6 +30,16 @@
 /* duart */
 int __init mxs_add_duart(const struct amba_device *dev);
 
+/* auart */
+struct mxs_auart_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init mxs_add_auart(
+		const struct mxs_auart_data *data);
+
 /* fec */
 #include <linux/fec.h>
 struct mxs_fec_data {
@@ -41,3 +51,28 @@
 struct platform_device *__init mxs_add_fec(
 		const struct mxs_fec_data *data,
 		const struct fec_platform_data *pdata);
+
+/* flexcan */
+#include <linux/can/platform/flexcan.h>
+struct mxs_flexcan_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init mxs_add_flexcan(
+		const struct mxs_flexcan_data *data,
+		const struct flexcan_platform_data *pdata);
+
+/* i2c */
+struct mxs_i2c_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t errirq;
+	resource_size_t dmairq;
+};
+struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+
+/* pwm */
+struct platform_device *__init mxs_add_mxs_pwm(
+		resource_size_t iobase, int id);
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
index 94e5dd8..b0190a4 100644
--- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h
+++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
@@ -254,102 +254,102 @@
 #define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
 
 /* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
 
-#define MX23_PAD_LCD_D00__GPO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
 
-#define MX23_PAD_SSP1_CMD__GPO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
 
 #endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
index fe558e3..7abdf58 100644
--- a/arch/arm/mach-mxs/include/mach/iomux.h
+++ b/arch/arm/mach-mxs/include/mach/iomux.h
@@ -91,6 +91,9 @@
 #define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
 					MXS_PAD_PULL_VALID_MASK)
 
+/* generic pad control used in most cases */
+#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
+
 #define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
 		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
 		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
index 9edd02e..c0a18c2 100644
--- a/arch/arm/mach-mxs/include/mach/mx23.h
+++ b/arch/arm/mach-mxs/include/mach/mx23.h
@@ -93,7 +93,7 @@
 #define MX23_INT_USB_WAKEUP		12
 #define MX23_INT_GPMI_DMA		13
 #define MX23_INT_SSP1_DMA		14
-#define MX23_INT_SSP_ERROR		15
+#define MX23_INT_SSP1_ERROR		15
 #define MX23_INT_GPIO0			16
 #define MX23_INT_GPIO1			17
 #define MX23_INT_GPIO2			18
@@ -101,9 +101,9 @@
 #define MX23_INT_SSP2_DMA		20
 #define MX23_INT_ECC8_IRQ		21
 #define MX23_INT_RTC_ALARM		22
-#define MX23_INT_UARTAPP_TX_DMA		23
-#define MX23_INT_UARTAPP_INTERNAL	24
-#define MX23_INT_UARTAPP_RX_DMA		25
+#define MX23_INT_AUART1_TX_DMA		23
+#define MX23_INT_AUART1			24
+#define MX23_INT_AUART1_RX_DMA		25
 #define MX23_INT_I2C_DMA		26
 #define MX23_INT_I2C_ERROR		27
 #define MX23_INT_TIMER0			28
@@ -135,11 +135,35 @@
 #define MX23_INT_DCP			54
 #define MX23_INT_BCH			56
 #define MX23_INT_PXP			57
-#define MX23_INT_UARTAPP2_TX_DMA	58
-#define MX23_INT_UARTAPP2_INTERNAL	59
-#define MX23_INT_UARTAPP2_RX_DMA	60
+#define MX23_INT_AUART2_TX_DMA		58
+#define MX23_INT_AUART2			59
+#define MX23_INT_AUART2_RX_DMA		60
 #define MX23_INT_VDAC_DETECT		61
 #define MX23_INT_VDD5V_DROOP		64
 #define MX23_INT_DCDC4P2_BO		65
 
+/*
+ * APBH DMA
+ */
+#define MX23_DMA_SSP1			1
+#define MX23_DMA_SSP2			2
+#define MX23_DMA_GPMI0			4
+#define MX23_DMA_GPMI1			5
+#define MX23_DMA_GPMI2			6
+#define MX23_DMA_GPMI3			7
+
+/*
+ * APBX DMA
+ */
+#define MX23_DMA_ADC			0
+#define MX23_DMA_DAC			1
+#define MX23_DMA_SPDIF			2
+#define MX23_DMA_I2C			3
+#define MX23_DMA_SAIF0			4
+#define MX23_DMA_UART0_RX		6
+#define MX23_DMA_UART0_TX		7
+#define MX23_DMA_UART1_RX		8
+#define MX23_DMA_UART1_TX		9
+#define MX23_DMA_SAIF1			10
+
 #endif /* __MACH_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
index 0716745..75d8611 100644
--- a/arch/arm/mach-mxs/include/mach/mx28.h
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -163,10 +163,10 @@
 #define MX28_INT_USB0			93
 #define MX28_INT_USB1_WAKEUP		94
 #define MX28_INT_USB0_WAKEUP		95
-#define MX28_INT_SSP0			96
-#define MX28_INT_SSP1			97
-#define MX28_INT_SSP2			98
-#define MX28_INT_SSP3			99
+#define MX28_INT_SSP0_ERROR		96
+#define MX28_INT_SSP1_ERROR		97
+#define MX28_INT_SSP2_ERROR		98
+#define MX28_INT_SSP3_ERROR		99
 #define MX28_INT_ENET_SWI		100
 #define MX28_INT_ENET_MAC0		101
 #define MX28_INT_ENET_MAC1		102
@@ -185,4 +185,41 @@
 #define MX28_INT_GPIO1			126
 #define MX28_INT_GPIO0			127
 
+/*
+ * APBH DMA
+ */
+#define MX28_DMA_SSP0			0
+#define MX28_DMA_SSP1			1
+#define MX28_DMA_SSP2			2
+#define MX28_DMA_SSP3			3
+#define MX28_DMA_GPMI0			4
+#define MX28_DMA_GPMI1			5
+#define MX28_DMA_GPMI2			6
+#define MX28_DMA_GPMI3			7
+#define MX28_DMA_GPMI4			8
+#define MX28_DMA_GPMI5			9
+#define MX28_DMA_GPMI6			10
+#define MX28_DMA_GPMI7			11
+#define MX28_DMA_HSADC			12
+#define MX28_DMA_LCDIF			13
+
+/*
+ * APBX DMA
+ */
+#define MX28_DMA_AUART4_RX		0
+#define MX28_DMA_AUART4_TX		1
+#define MX28_DMA_SPDIF_TX		2
+#define MX28_DMA_SAIF0			4
+#define MX28_DMA_SAIF1			5
+#define MX28_DMA_I2C0			6
+#define MX28_DMA_I2C1			7
+#define MX28_DMA_AUART0_RX		8
+#define MX28_DMA_AUART0_TX		9
+#define MX28_DMA_AUART1_RX		10
+#define MX28_DMA_AUART1_TX		11
+#define MX28_DMA_AUART2_RX		12
+#define MX28_DMA_AUART2_TX		13
+#define MX28_DMA_AUART3_RX		14
+#define MX28_DMA_AUART3_TX		15
+
 #endif /* __MACH_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index f186c08..35a89dd 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -28,8 +28,13 @@
 /*
  * MXS CPU types
  */
-#define cpu_is_mx23()		(machine_is_mx23evk())
-#define cpu_is_mx28()		(machine_is_mx28evk())
+#define cpu_is_mx23()		(					\
+		machine_is_mx23evk() ||					\
+		0)
+#define cpu_is_mx28()		(					\
+		machine_is_mx28evk() ||					\
+		machine_is_tx28() ||					\
+		0)
 
 /*
  * IO addresses common to MXS-based
diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/arch/arm/mach-mxs/include/mach/mxsfb.h
new file mode 100644
index 0000000..e4d7979
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mxsfb.h
@@ -0,0 +1,49 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_FB_H
+#define __MACH_FB_H
+
+#include <linux/fb.h>
+
+#define STMLCDIF_8BIT 1	/** pixel data bus to the display is of 8 bit width */
+#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
+#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
+#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
+
+#define FB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
+#define FB_SYNC_DOTCLK_FAILING_ACT	(1 << 7) /* failing/negtive edge sampling */
+
+struct mxsfb_platform_data {
+	struct fb_videomode *mode_list;
+	unsigned mode_count;
+
+	unsigned default_bpp;
+
+	unsigned dotclk_delay;	/* refer manual HW_LCDIF_VDCTRL4 register */
+	unsigned ld_intf_width;	/* refer STMLCDIF_* macros */
+
+	unsigned fb_size;	/* Size of the video memory. If zero a
+				 * default will be used
+				 */
+	unsigned long fb_phys;	/* physical address for the video memory. If
+				 * zero the framebuffer memory will be dynamically
+				 * allocated. If specified,fb_size must also be specified.
+				 * fb_phys must be unused by Linux.
+				 */
+};
+
+#endif /* __MACH_FB_H */
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index a005e76f..f12a173 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
 		mxs_duart_base = MX23_DUART_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX28EVK:
+	case MACH_TYPE_TX28:
 		mxs_duart_base = MX28_DUART_BASE_ADDR;
 		break;
 	default:
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index aa06400..a66994f 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -26,17 +26,103 @@
 
 #include "devices-mx23.h"
 
+#define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
+#define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
+
 static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	/* duart */
-	MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA,
-	MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA,
+	MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
+	MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
+
+	/* auart */
+	MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
+	MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
+	MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
+	MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
+
+	/* mxsfb (lcdif) */
+	MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
+	MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
+	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
+	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
+	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
+	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
+	/* LCD panel enable */
+	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
+	/* backlight control */
+	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+};
+
+/* mxsfb (lcdif) */
+static struct fb_videomode mx23evk_video_modes[] = {
+	{
+		.name		= "Samsung-LMS430HF02",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 272,
+		.pixclock	= 108096, /* picosecond (9.2 MHz) */
+		.left_margin	= 15,
+		.right_margin	= 8,
+		.upper_margin	= 12,
+		.lower_margin	= 4,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
+				  FB_SYNC_DOTCLK_FAILING_ACT,
+	},
+};
+
+static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
+	.mode_list	= mx23evk_video_modes,
+	.mode_count	= ARRAY_SIZE(mx23evk_video_modes),
+	.default_bpp	= 32,
+	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
 static void __init mx23evk_init(void)
 {
+	int ret;
+
 	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
 
 	mx23_add_duart();
+	mx23_add_auart0();
+
+	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+	if (ret)
+		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+	else
+		gpio_set_value(MX23EVK_LCD_ENABLE, 1);
+
+	ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
+	if (ret)
+		pr_warn("failed to request gpio bl-enable: %d\n", ret);
+	else
+		gpio_set_value(MX23EVK_BL_ENABLE, 1);
+
+	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
 }
 
 static void __init mx23evk_timer_init(void)
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 8e2c597..08002d0 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -28,54 +28,93 @@
 #include "devices-mx28.h"
 #include "gpio.h"
 
+#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
 #define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
+#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
+#define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
 #define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 
 static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	/* duart */
-	MX28_PAD_PWM0__DUART_RX |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_PWM1__DUART_TX |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
+	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
 
+	/* auart0 */
+	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
+	/* auart3 */
+	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
 	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
 	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_COL__ENET1_TX_EN |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
 	/* phy power line */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
 	/* phy reset line */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
+
+	/* flexcan0 */
+	MX28_PAD_GPMI_RDY2__CAN0_TX,
+	MX28_PAD_GPMI_RDY3__CAN0_RX,
+	/* flexcan1 */
+	MX28_PAD_GPMI_CE2N__CAN1_TX,
+	MX28_PAD_GPMI_CE3N__CAN1_RX,
+	/* transceiver power control */
+	MX28_PAD_SSP1_CMD__GPIO_2_13,
+
+	/* mxsfb (lcdif) */
+	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
+	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
+	MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
+	MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
+	/* LCD panel enable */
+	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
+	/* backlight control */
+	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
 };
 
 /* fec */
@@ -119,7 +158,7 @@
 	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
 }
 
-static struct fec_platform_data mx28_fec_pdata[] = {
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
 	{
 		/* fec0 */
 		.phy = PHY_INTERFACE_MODE_RMII,
@@ -129,15 +168,135 @@
 	},
 };
 
+static int __init mx28evk_fec_get_mac(void)
+{
+	int i;
+	u32 val;
+	const u32 *ocotp = mxs_get_ocotp();
+
+	if (!ocotp)
+		goto error;
+
+	/*
+	 * OCOTP only stores the last 4 octets for each mac address,
+	 * so hard-code Freescale OUI (00:04:9f) here.
+	 */
+	for (i = 0; i < 2; i++) {
+		val = ocotp[i * 4];
+		mx28_fec_pdata[i].mac[0] = 0x00;
+		mx28_fec_pdata[i].mac[1] = 0x04;
+		mx28_fec_pdata[i].mac[2] = 0x9f;
+		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+	}
+
+	return 0;
+
+error:
+	pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
+	return -ETIMEDOUT;
+}
+
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+static int flexcan0_en, flexcan1_en;
+
+static void mx28evk_flexcan_switch(void)
+{
+	if (flexcan0_en || flexcan1_en)
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+	else
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+
+static void mx28evk_flexcan0_switch(int enable)
+{
+	flexcan0_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static void mx28evk_flexcan1_switch(int enable)
+{
+	flexcan1_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static const struct flexcan_platform_data
+		mx28evk_flexcan_pdata[] __initconst = {
+	{
+		.transceiver_switch = mx28evk_flexcan0_switch,
+	}, {
+		.transceiver_switch = mx28evk_flexcan1_switch,
+	}
+};
+
+/* mxsfb (lcdif) */
+static struct fb_videomode mx28evk_video_modes[] = {
+	{
+		.name		= "Seiko-43WVF1G",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 29851, /* picosecond (33.5 MHz) */
+		.left_margin	= 89,
+		.right_margin	= 164,
+		.upper_margin	= 23,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
+				  FB_SYNC_DOTCLK_FAILING_ACT,
+	},
+};
+
+static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
+	.mode_list	= mx28evk_video_modes,
+	.mode_count	= ARRAY_SIZE(mx28evk_video_modes),
+	.default_bpp	= 32,
+	.ld_intf_width	= STMLCDIF_24BIT,
+};
+
 static void __init mx28evk_init(void)
 {
+	int ret;
+
 	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
 
 	mx28_add_duart();
+	mx28_add_auart0();
+	mx28_add_auart3();
+
+	if (mx28evk_fec_get_mac())
+		pr_warn("%s: failed on fec mac setup\n", __func__);
 
 	mx28evk_fec_reset();
 	mx28_add_fec(0, &mx28_fec_pdata[0]);
 	mx28_add_fec(1, &mx28_fec_pdata[1]);
+
+	ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+				"flexcan-switch");
+	if (ret) {
+		pr_err("failed to request gpio flexcan-switch: %d\n", ret);
+	} else {
+		mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
+		mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
+	}
+
+	ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+	if (ret)
+		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+	else
+		gpio_set_value(MX28EVK_LCD_ENABLE, 1);
+
+	ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
+	if (ret)
+		pr_warn("failed to request gpio bl-enable: %d\n", ret);
+	else
+		gpio_set_value(MX28EVK_BL_ENABLE, 1);
+
+	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 }
 
 static void __init mx28evk_timer_init(void)
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
new file mode 100644
index 0000000..b65e371
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2010 <LW@KARO-electronics.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/i2c.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+#include "module-tx28.h"
+
+#define TX28_STK5_GPIO_LED		MXS_GPIO_NR(4, 10)
+
+static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
+	/* LED */
+	MX28_PAD_ENET0_RXD3__GPIO_4_10 |
+		MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
+
+	/* framebuffer */
+#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
+	MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
+	MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
+	MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
+	MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
+	MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
+	MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
+	MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
+	MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
+	MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
+	MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
+	MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
+	MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
+	MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
+	MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
+	MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
+	MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
+	MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
+	MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
+	MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
+	MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
+	MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
+	MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
+	MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
+	MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
+	MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
+	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
+	MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
+	MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
+	MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
+	MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
+	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
+	MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
+	MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
+	MX28_PAD_PWM0__PWM_0 | LCD_MODE,
+
+	/* UART1 */
+	MX28_PAD_AUART0_CTS__DUART_RX,
+	MX28_PAD_AUART0_RTS__DUART_TX,
+	MX28_PAD_AUART0_TX__DUART_RTS,
+	MX28_PAD_AUART0_RX__DUART_CTS,
+
+	/* UART2 */
+	MX28_PAD_AUART1_RX__AUART1_RX,
+	MX28_PAD_AUART1_TX__AUART1_TX,
+	MX28_PAD_AUART1_RTS__AUART1_RTS,
+	MX28_PAD_AUART1_CTS__AUART1_CTS,
+
+	/* CAN */
+	MX28_PAD_GPMI_RDY2__CAN0_TX,
+	MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL,
+	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* TSC2007 */
+	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
+
+	/* MMC0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+};
+
+static struct gpio_led tx28_stk5v3_leds[] = {
+	{
+		.name = "GPIO-LED",
+		.default_trigger = "heartbeat",
+		.gpio = TX28_STK5_GPIO_LED,
+	},
+};
+
+static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
+	.leds = tx28_stk5v3_leds,
+	.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
+};
+
+static struct spi_board_info tx28_spi_board_info[] = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1339", 0x68),
+	},
+};
+
+static void __init tx28_stk5v3_init(void)
+{
+	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
+			ARRAY_SIZE(tx28_stk5v3_pads));
+
+	mx28_add_duart(); /* UART1 */
+	mx28_add_auart(1); /* UART2 */
+
+	tx28_add_fec0();
+	/* spi via ssp will be added when available */
+	spi_register_board_info(tx28_spi_board_info,
+			ARRAY_SIZE(tx28_spi_board_info));
+	mxs_add_platform_device("leds-gpio", 0, NULL, 0,
+			&tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
+			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
+}
+
+static void __init tx28_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer tx28_timer = {
+	.init = tx28_timer_init,
+};
+
+MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
+	.map_io = mx28_map_io,
+	.init_irq = mx28_init_irq,
+	.init_machine = tx28_stk5v3_init,
+	.timer = &tx28_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
new file mode 100644
index 0000000..fa0b154
--- /dev/null
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2010 <LW@KARO-electronics.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/fec.h>
+#include <linux/gpio.h>
+
+#include <mach/iomux-mx28.h>
+#include "../devices-mx28.h"
+
+#include "module-tx28.h"
+
+#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+
+static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
+	/* PHY POWER */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
+	/* PHY RESET */
+	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
+		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
+	/* Mode strap pins 0-2 */
+	MX28_PAD_ENET0_RXD0__GPIO_4_3 |
+		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
+	MX28_PAD_ENET0_RXD1__GPIO_4_4 |
+		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
+	MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
+		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
+	/* nINT */
+	MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
+		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
+
+	MX28_PAD_ENET0_MDC__GPIO_4_0,
+	MX28_PAD_ENET0_MDIO__GPIO_4_1,
+	MX28_PAD_ENET0_TX_EN__GPIO_4_6,
+	MX28_PAD_ENET0_TXD0__GPIO_4_7,
+	MX28_PAD_ENET0_TXD1__GPIO_4_8,
+	MX28_PAD_ENET_CLK__GPIO_4_16,
+};
+
+#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
+static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
+};
+
+static const struct fec_platform_data tx28_fec_data __initconst = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+int __init tx28_add_fec0(void)
+{
+	int i, ret;
+
+	pr_debug("%s: Switching FEC PHY power off\n", __func__);
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
+			ARRAY_SIZE(tx28_fec_gpio_pads));
+	for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
+		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
+			PAD_PIN(tx28_fec_gpio_pads[i]));
+
+		ret = gpio_request(gpio, "FEC");
+		if (ret) {
+			pr_err("Failed to request GPIO_%d_%d: %d\n",
+				PAD_BANK(tx28_fec_gpio_pads[i]),
+				PAD_PIN(tx28_fec_gpio_pads[i]), ret);
+			goto free_gpios;
+		}
+		ret = gpio_direction_output(gpio, 0);
+		if (ret) {
+			pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
+					gpio / 32 + 1, gpio % 32, ret);
+			goto free_gpios;
+		}
+	}
+
+	/* Power up fec phy */
+	pr_debug("%s: Switching FEC PHY power on\n", __func__);
+	ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
+	if (ret) {
+		pr_err("Failed to power on PHY: %d\n", ret);
+		goto free_gpios;
+	}
+	mdelay(26); /* 25ms according to data sheet */
+
+	/* nINT */
+	gpio_direction_input(MXS_GPIO_NR(4, 5));
+	/* Mode strap pins */
+	gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
+	gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
+	gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
+
+	udelay(100); /* minimum assertion time for nRST */
+
+	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
+	gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
+			ARRAY_SIZE(tx28_fec_pads));
+	if (ret) {
+		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+				__func__, ret);
+		goto free_gpios;
+	}
+	pr_debug("%s: Registering FEC device\n", __func__);
+	mx28_add_fec(0, &tx28_fec_data);
+	return 0;
+
+free_gpios:
+	while (--i >= 0) {
+		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
+			PAD_PIN(tx28_fec_gpio_pads[i]));
+
+		gpio_free(gpio);
+	}
+
+	return ret;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
new file mode 100644
index 0000000..df9e1b6
--- /dev/null
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+int __init tx28_add_fec0(void);
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
new file mode 100644
index 0000000..65157a3
--- /dev/null
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+#include <mach/mxs.h>
+
+#define OCOTP_WORD_OFFSET		0x20
+#define OCOTP_WORD_COUNT		0x20
+
+#define BM_OCOTP_CTRL_BUSY		(1 << 8)
+#define BM_OCOTP_CTRL_ERROR		(1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
+
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
+
+const u32 *mxs_get_ocotp(void)
+{
+	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
+	int timeout = 0x400;
+	size_t i;
+	static int once = 0;
+
+	if (once)
+		return ocotp_words;
+
+	mutex_lock(&ocotp_mutex);
+
+	/*
+	 * clk_enable(hbus_clk) for ocotp can be skipped
+	 * as it must be on when system is running.
+	 */
+
+	/* try to clear ERROR bit */
+	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+	/* check both BUSY and ERROR cleared */
+	while ((__raw_readl(ocotp_base) &
+		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	/* open OCOTP banks for read */
+	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	/* approximately wait 32 hclk cycles */
+	udelay(1);
+
+	/* poll BUSY bit becoming cleared */
+	timeout = 0x400;
+	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	for (i = 0; i < OCOTP_WORD_COUNT; i++)
+		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+						i * 0x10);
+
+	/* close banks for power saving */
+	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	once = 1;
+
+	mutex_unlock(&ocotp_mutex);
+
+	return ocotp_words;
+
+error_unlock:
+	mutex_unlock(&ocotp_mutex);
+	pr_err("%s: timeout in reading OCOTP\n", __func__);
+	return NULL;
+}
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
new file mode 100644
index 0000000..fb042da
--- /dev/null
+++ b/arch/arm/mach-mxs/pm.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/system.h>
+
+static int mxs_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		arch_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mxs_suspend_ops = {
+	.enter = mxs_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init mxs_pm_init(void)
+{
+	suspend_set_ops(&mxs_suspend_ops);
+	return 0;
+}
+device_initcall(mxs_pm_init);
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
index dbc0474..0ea5c9d 100644
--- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
@@ -33,10 +33,6 @@
 #define HW_CLKCTRL_PLLCTRL0_CLR	(0x00000008)
 #define HW_CLKCTRL_PLLCTRL0_TOG	(0x0000000c)
 
-#define BP_CLKCTRL_PLLCTRL0_RSRVD6	30
-#define BM_CLKCTRL_PLLCTRL0_RSRVD6	0xC0000000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \
-		(((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6)
 #define BP_CLKCTRL_PLLCTRL0_LFR_SEL	28
 #define BM_CLKCTRL_PLLCTRL0_LFR_SEL	0x30000000
 #define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v)  \
@@ -45,10 +41,6 @@
 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_RSRVD5	26
-#define BM_CLKCTRL_PLLCTRL0_RSRVD5	0x0C000000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v)  \
-		(((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5)
 #define BP_CLKCTRL_PLLCTRL0_CP_SEL	24
 #define BM_CLKCTRL_PLLCTRL0_CP_SEL	0x03000000
 #define BF_CLKCTRL_PLLCTRL0_CP_SEL(v)  \
@@ -57,10 +49,6 @@
 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_RSRVD4	22
-#define BM_CLKCTRL_PLLCTRL0_RSRVD4	0x00C00000
-#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v)  \
-		(((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4)
 #define BP_CLKCTRL_PLLCTRL0_DIV_SEL	20
 #define BM_CLKCTRL_PLLCTRL0_DIV_SEL	0x00300000
 #define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v)  \
@@ -69,23 +57,13 @@
 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER     0x1
 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST    0x2
 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_RSRVD3	0x00080000
 #define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLLCTRL0_RSRVD2	0x00020000
 #define BM_CLKCTRL_PLLCTRL0_POWER	0x00010000
-#define BP_CLKCTRL_PLLCTRL0_RSRVD1	0
-#define BM_CLKCTRL_PLLCTRL0_RSRVD1	0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1)
 
 #define HW_CLKCTRL_PLLCTRL1	(0x00000010)
 
 #define BM_CLKCTRL_PLLCTRL1_LOCK	0x80000000
 #define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLLCTRL1_RSRVD1	16
-#define BM_CLKCTRL_PLLCTRL1_RSRVD1	0x3FFF0000
-#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v)  \
-		(((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1)
 #define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT	0
 #define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT	0x0000FFFF
 #define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v)  \
@@ -96,29 +74,15 @@
 #define HW_CLKCTRL_CPU_CLR	(0x00000028)
 #define HW_CLKCTRL_CPU_TOG	(0x0000002c)
 
-#define BP_CLKCTRL_CPU_RSRVD5	30
-#define BM_CLKCTRL_CPU_RSRVD5	0xC0000000
-#define BF_CLKCTRL_CPU_RSRVD5(v) \
-		(((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
 #define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
 #define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_RSRVD4	0x08000000
 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
 #define BP_CLKCTRL_CPU_DIV_XTAL	16
 #define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
 #define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
 		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BP_CLKCTRL_CPU_RSRVD3	13
-#define BM_CLKCTRL_CPU_RSRVD3	0x0000E000
-#define BF_CLKCTRL_CPU_RSRVD3(v)  \
-		(((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
 #define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_RSRVD2	0x00000800
 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_RSRVD1	6
-#define BM_CLKCTRL_CPU_RSRVD1	0x000003C0
-#define BF_CLKCTRL_CPU_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
 #define BP_CLKCTRL_CPU_DIV_CPU	0
 #define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
 #define BF_CLKCTRL_CPU_DIV_CPU(v)  \
@@ -129,10 +93,6 @@
 #define HW_CLKCTRL_HBUS_CLR	(0x00000038)
 #define HW_CLKCTRL_HBUS_TOG	(0x0000003c)
 
-#define BP_CLKCTRL_HBUS_RSRVD4	30
-#define BM_CLKCTRL_HBUS_RSRVD4	0xC0000000
-#define BF_CLKCTRL_HBUS_RSRVD4(v) \
-		(((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4)
 #define BM_CLKCTRL_HBUS_BUSY	0x20000000
 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x10000000
 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x08000000
@@ -143,7 +103,6 @@
 #define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
 #define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
 #define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE	0x00100000
-#define BM_CLKCTRL_HBUS_RSRVD2	0x00080000
 #define BP_CLKCTRL_HBUS_SLOW_DIV	16
 #define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
 #define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
@@ -154,10 +113,6 @@
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BP_CLKCTRL_HBUS_RSRVD1	6
-#define BM_CLKCTRL_HBUS_RSRVD1	0x0000FFC0
-#define BF_CLKCTRL_HBUS_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
 #define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
 #define BP_CLKCTRL_HBUS_DIV	0
 #define BM_CLKCTRL_HBUS_DIV	0x0000001F
@@ -167,10 +122,6 @@
 #define HW_CLKCTRL_XBUS	(0x00000040)
 
 #define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BP_CLKCTRL_XBUS_RSRVD1	11
-#define BM_CLKCTRL_XBUS_RSRVD1	0x7FFFF800
-#define BF_CLKCTRL_XBUS_RSRVD1(v)  \
-		(((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1)
 #define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
 #define BP_CLKCTRL_XBUS_DIV	0
 #define BM_CLKCTRL_XBUS_DIV	0x000003FF
@@ -192,10 +143,6 @@
 #define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE	0x08000000
 #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_RSRVD1	2
-#define BM_CLKCTRL_XTAL_RSRVD1	0x03FFFFFC
-#define BF_CLKCTRL_XTAL_RSRVD1(v)  \
-		(((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
 #define BP_CLKCTRL_XTAL_DIV_UART	0
 #define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
 #define BF_CLKCTRL_XTAL_DIV_UART(v)  \
@@ -205,12 +152,7 @@
 
 #define BP_CLKCTRL_PIX_CLKGATE	31
 #define BM_CLKCTRL_PIX_CLKGATE	0x80000000
-#define BM_CLKCTRL_PIX_RSRVD2	0x40000000
 #define BM_CLKCTRL_PIX_BUSY	0x20000000
-#define BP_CLKCTRL_PIX_RSRVD1	13
-#define BM_CLKCTRL_PIX_RSRVD1	0x1FFFE000
-#define BF_CLKCTRL_PIX_RSRVD1(v)  \
-		(((v) << 13) & BM_CLKCTRL_PIX_RSRVD1)
 #define BM_CLKCTRL_PIX_DIV_FRAC_EN	0x00001000
 #define BP_CLKCTRL_PIX_DIV	0
 #define BM_CLKCTRL_PIX_DIV	0x00000FFF
@@ -221,12 +163,7 @@
 
 #define BP_CLKCTRL_SSP_CLKGATE	31
 #define BM_CLKCTRL_SSP_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP_RSRVD2	0x40000000
 #define BM_CLKCTRL_SSP_BUSY	0x20000000
-#define BP_CLKCTRL_SSP_RSRVD1	10
-#define BM_CLKCTRL_SSP_RSRVD1	0x1FFFFC00
-#define BF_CLKCTRL_SSP_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_SSP_RSRVD1)
 #define BM_CLKCTRL_SSP_DIV_FRAC_EN	0x00000200
 #define BP_CLKCTRL_SSP_DIV	0
 #define BM_CLKCTRL_SSP_DIV	0x000001FF
@@ -237,12 +174,7 @@
 
 #define BP_CLKCTRL_GPMI_CLKGATE	31
 #define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_RSRVD2	0x40000000
 #define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BP_CLKCTRL_GPMI_RSRVD1	11
-#define BM_CLKCTRL_GPMI_RSRVD1	0x1FFFF800
-#define BF_CLKCTRL_GPMI_RSRVD1(v)  \
-		(((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
 #define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
 #define BP_CLKCTRL_GPMI_DIV	0
 #define BM_CLKCTRL_GPMI_DIV	0x000003FF
@@ -252,10 +184,6 @@
 #define HW_CLKCTRL_SPDIF	(0x00000090)
 
 #define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-#define BP_CLKCTRL_SPDIF_RSRVD	0
-#define BM_CLKCTRL_SPDIF_RSRVD	0x7FFFFFFF
-#define BF_CLKCTRL_SPDIF_RSRVD(v)  \
-		(((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
 
 #define HW_CLKCTRL_EMI	(0x000000a0)
 
@@ -266,24 +194,12 @@
 #define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
 #define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BP_CLKCTRL_EMI_RSRVD3	18
-#define BM_CLKCTRL_EMI_RSRVD3	0x03FC0000
-#define BF_CLKCTRL_EMI_RSRVD3(v)  \
-		(((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
 #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_RSRVD2	12
-#define BM_CLKCTRL_EMI_RSRVD2	0x0000F000
-#define BF_CLKCTRL_EMI_RSRVD2(v)  \
-		(((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
 #define BP_CLKCTRL_EMI_DIV_XTAL	8
 #define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
 #define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
 		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_RSRVD1	6
-#define BM_CLKCTRL_EMI_RSRVD1	0x000000C0
-#define BF_CLKCTRL_EMI_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
 #define BP_CLKCTRL_EMI_DIV_EMI	0
 #define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
 #define BF_CLKCTRL_EMI_DIV_EMI(v)  \
@@ -292,22 +208,13 @@
 #define HW_CLKCTRL_IR	(0x000000b0)
 
 #define BM_CLKCTRL_IR_CLKGATE	0x80000000
-#define BM_CLKCTRL_IR_RSRVD3	0x40000000
 #define BM_CLKCTRL_IR_AUTO_DIV	0x20000000
 #define BM_CLKCTRL_IR_IR_BUSY	0x10000000
 #define BM_CLKCTRL_IR_IROV_BUSY	0x08000000
-#define BP_CLKCTRL_IR_RSRVD2	25
-#define BM_CLKCTRL_IR_RSRVD2	0x06000000
-#define BF_CLKCTRL_IR_RSRVD2(v)  \
-		(((v) << 25) & BM_CLKCTRL_IR_RSRVD2)
 #define BP_CLKCTRL_IR_IROV_DIV	16
 #define BM_CLKCTRL_IR_IROV_DIV	0x01FF0000
 #define BF_CLKCTRL_IR_IROV_DIV(v)  \
 		(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_RSRVD1	10
-#define BM_CLKCTRL_IR_RSRVD1	0x0000FC00
-#define BF_CLKCTRL_IR_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_IR_RSRVD1)
 #define BP_CLKCTRL_IR_IR_DIV	0
 #define BM_CLKCTRL_IR_IR_DIV	0x000003FF
 #define BF_CLKCTRL_IR_IR_DIV(v)  \
@@ -316,12 +223,7 @@
 #define HW_CLKCTRL_SAIF	(0x000000c0)
 
 #define BM_CLKCTRL_SAIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF_RSRVD2	0x40000000
 #define BM_CLKCTRL_SAIF_BUSY	0x20000000
-#define BP_CLKCTRL_SAIF_RSRVD1	17
-#define BM_CLKCTRL_SAIF_RSRVD1	0x1FFE0000
-#define BF_CLKCTRL_SAIF_RSRVD1(v)  \
-		(((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1)
 #define BM_CLKCTRL_SAIF_DIV_FRAC_EN	0x00010000
 #define BP_CLKCTRL_SAIF_DIV	0
 #define BM_CLKCTRL_SAIF_DIV	0x0000FFFF
@@ -332,20 +234,11 @@
 
 #define BM_CLKCTRL_TV_CLK_TV108M_GATE	0x80000000
 #define BM_CLKCTRL_TV_CLK_TV_GATE	0x40000000
-#define BP_CLKCTRL_TV_RSRVD	0
-#define BM_CLKCTRL_TV_RSRVD	0x3FFFFFFF
-#define BF_CLKCTRL_TV_RSRVD(v)  \
-		(((v) << 0) & BM_CLKCTRL_TV_RSRVD)
 
 #define HW_CLKCTRL_ETM	(0x000000e0)
 
 #define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_RSRVD2	0x40000000
 #define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BP_CLKCTRL_ETM_RSRVD1	7
-#define BM_CLKCTRL_ETM_RSRVD1	0x1FFFFF80
-#define BF_CLKCTRL_ETM_RSRVD1(v)  \
-		(((v) << 7) & BM_CLKCTRL_ETM_RSRVD1)
 #define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000040
 #define BP_CLKCTRL_ETM_DIV	0
 #define BM_CLKCTRL_ETM_DIV	0x0000003F
@@ -393,36 +286,23 @@
 
 #define BM_CLKCTRL_FRAC1_CLKGATEVID	0x80000000
 #define BM_CLKCTRL_FRAC1_VID_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC1_RSRVD1	0
-#define BM_CLKCTRL_FRAC1_RSRVD1	0x3FFFFFFF
-#define BF_CLKCTRL_FRAC1_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1)
 
 #define HW_CLKCTRL_CLKSEQ	(0x00000110)
 #define HW_CLKCTRL_CLKSEQ_SET	(0x00000114)
 #define HW_CLKCTRL_CLKSEQ_CLR	(0x00000118)
 #define HW_CLKCTRL_CLKSEQ_TOG	(0x0000011c)
 
-#define BP_CLKCTRL_CLKSEQ_RSRVD1	9
-#define BM_CLKCTRL_CLKSEQ_RSRVD1	0xFFFFFE00
-#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
-		(((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1)
 #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
 #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00000080
 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000040
 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP	0x00000020
 #define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000010
 #define BM_CLKCTRL_CLKSEQ_BYPASS_IR	0x00000008
-#define BM_CLKCTRL_CLKSEQ_RSRVD0	0x00000004
 #define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
 #define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF	0x00000001
 
 #define HW_CLKCTRL_RESET	(0x00000120)
 
-#define BP_CLKCTRL_RESET_RSRVD	2
-#define BM_CLKCTRL_RESET_RSRVD	0xFFFFFFFC
-#define BF_CLKCTRL_RESET_RSRVD(v) \
-		(((v) << 2) & BM_CLKCTRL_RESET_RSRVD)
 #define BM_CLKCTRL_RESET_CHIP	0x00000002
 #define BM_CLKCTRL_RESET_DIG	0x00000001
 
@@ -432,10 +312,6 @@
 #define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
 		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-#define BP_CLKCTRL_STATUS_RSRVD	0
-#define BM_CLKCTRL_STATUS_RSRVD	0x3FFFFFFF
-#define BF_CLKCTRL_STATUS_RSRVD(v)  \
-		(((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
 
 #define HW_CLKCTRL_VERSION	(0x00000140)
 
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
index 661df187..7d1b061 100644
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
@@ -31,10 +31,6 @@
 #define HW_CLKCTRL_PLL0CTRL0_CLR	(0x00000008)
 #define HW_CLKCTRL_PLL0CTRL0_TOG	(0x0000000c)
 
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD6	30
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD6	0xC0000000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \
-		(((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6)
 #define BP_CLKCTRL_PLL0CTRL0_LFR_SEL	28
 #define BM_CLKCTRL_PLL0CTRL0_LFR_SEL	0x30000000
 #define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v)  \
@@ -43,10 +39,6 @@
 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD5	26
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD5	0x0C000000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v)  \
-		(((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5)
 #define BP_CLKCTRL_PLL0CTRL0_CP_SEL	24
 #define BM_CLKCTRL_PLL0CTRL0_CP_SEL	0x03000000
 #define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v)  \
@@ -55,10 +47,6 @@
 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD4	22
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD4	0x00C00000
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v)  \
-		(((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4)
 #define BP_CLKCTRL_PLL0CTRL0_DIV_SEL	20
 #define BM_CLKCTRL_PLL0CTRL0_DIV_SEL	0x00300000
 #define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v)  \
@@ -67,22 +55,13 @@
 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER     0x1
 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST    0x2
 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD3	0x00080000
 #define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS	0x00040000
 #define BM_CLKCTRL_PLL0CTRL0_POWER	0x00020000
-#define BP_CLKCTRL_PLL0CTRL0_RSRVD1	0
-#define BM_CLKCTRL_PLL0CTRL0_RSRVD1	0x0001FFFF
-#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1)
 
 #define HW_CLKCTRL_PLL0CTRL1	(0x00000010)
 
 #define BM_CLKCTRL_PLL0CTRL1_LOCK	0x80000000
 #define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_RSRVD1	16
-#define BM_CLKCTRL_PLL0CTRL1_RSRVD1	0x3FFF0000
-#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v)  \
-		(((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1)
 #define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0
 #define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0x0000FFFF
 #define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v)  \
@@ -94,7 +73,6 @@
 #define HW_CLKCTRL_PLL1CTRL0_TOG	(0x0000002c)
 
 #define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI	0x80000000
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD6	0x40000000
 #define BP_CLKCTRL_PLL1CTRL0_LFR_SEL	28
 #define BM_CLKCTRL_PLL1CTRL0_LFR_SEL	0x30000000
 #define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v)  \
@@ -103,10 +81,6 @@
 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD5	26
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD5	0x0C000000
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v)  \
-		(((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5)
 #define BP_CLKCTRL_PLL1CTRL0_CP_SEL	24
 #define BM_CLKCTRL_PLL1CTRL0_CP_SEL	0x03000000
 #define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v)  \
@@ -115,10 +89,6 @@
 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2   0x1
 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05  0x2
 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD4	22
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD4	0x00C00000
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v)  \
-		(((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4)
 #define BP_CLKCTRL_PLL1CTRL0_DIV_SEL	20
 #define BM_CLKCTRL_PLL1CTRL0_DIV_SEL	0x00300000
 #define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v)  \
@@ -127,22 +97,13 @@
 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER     0x1
 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST    0x2
 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD3	0x00080000
 #define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS	0x00040000
 #define BM_CLKCTRL_PLL1CTRL0_POWER	0x00020000
-#define BP_CLKCTRL_PLL1CTRL0_RSRVD1	0
-#define BM_CLKCTRL_PLL1CTRL0_RSRVD1	0x0001FFFF
-#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1)
 
 #define HW_CLKCTRL_PLL1CTRL1	(0x00000030)
 
 #define BM_CLKCTRL_PLL1CTRL1_LOCK	0x80000000
 #define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_RSRVD1	16
-#define BM_CLKCTRL_PLL1CTRL1_RSRVD1	0x3FFF0000
-#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v)  \
-		(((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1)
 #define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0
 #define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0x0000FFFF
 #define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v)  \
@@ -154,51 +115,31 @@
 #define HW_CLKCTRL_PLL2CTRL0_TOG	(0x0000004c)
 
 #define BM_CLKCTRL_PLL2CTRL0_CLKGATE	0x80000000
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD3	0x40000000
 #define BP_CLKCTRL_PLL2CTRL0_LFR_SEL	28
 #define BM_CLKCTRL_PLL2CTRL0_LFR_SEL	0x30000000
 #define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v)  \
 		(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD2	0x08000000
 #define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	0x04000000
 #define BP_CLKCTRL_PLL2CTRL0_CP_SEL	24
 #define BM_CLKCTRL_PLL2CTRL0_CP_SEL	0x03000000
 #define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v)  \
 		(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
 #define BM_CLKCTRL_PLL2CTRL0_POWER	0x00800000
-#define BP_CLKCTRL_PLL2CTRL0_RSRVD1	0
-#define BM_CLKCTRL_PLL2CTRL0_RSRVD1	0x007FFFFF
-#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1)
 
 #define HW_CLKCTRL_CPU	(0x00000050)
 #define HW_CLKCTRL_CPU_SET	(0x00000054)
 #define HW_CLKCTRL_CPU_CLR	(0x00000058)
 #define HW_CLKCTRL_CPU_TOG	(0x0000005c)
 
-#define BP_CLKCTRL_CPU_RSRVD5	30
-#define BM_CLKCTRL_CPU_RSRVD5	0xC0000000
-#define BF_CLKCTRL_CPU_RSRVD5(v) \
-		(((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
 #define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
 #define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_RSRVD4	0x08000000
 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
 #define BP_CLKCTRL_CPU_DIV_XTAL	16
 #define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
 #define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
 		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BP_CLKCTRL_CPU_RSRVD3	13
-#define BM_CLKCTRL_CPU_RSRVD3	0x0000E000
-#define BF_CLKCTRL_CPU_RSRVD3(v)  \
-		(((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
 #define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_RSRVD2	0x00000800
 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_RSRVD1	6
-#define BM_CLKCTRL_CPU_RSRVD1	0x000003C0
-#define BF_CLKCTRL_CPU_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
 #define BP_CLKCTRL_CPU_DIV_CPU	0
 #define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
 #define BF_CLKCTRL_CPU_DIV_CPU(v)  \
@@ -212,7 +153,6 @@
 #define BM_CLKCTRL_HBUS_ASM_BUSY	0x80000000
 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x40000000
 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x20000000
-#define BM_CLKCTRL_HBUS_RSRVD2	0x10000000
 #define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	0x08000000
 #define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
 #define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
@@ -232,10 +172,6 @@
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BP_CLKCTRL_HBUS_RSRVD1	6
-#define BM_CLKCTRL_HBUS_RSRVD1	0x0000FFC0
-#define BF_CLKCTRL_HBUS_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
 #define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
 #define BP_CLKCTRL_HBUS_DIV	0
 #define BM_CLKCTRL_HBUS_DIV	0x0000001F
@@ -245,10 +181,6 @@
 #define HW_CLKCTRL_XBUS	(0x00000070)
 
 #define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BP_CLKCTRL_XBUS_RSRVD1	12
-#define BM_CLKCTRL_XBUS_RSRVD1	0x7FFFF000
-#define BF_CLKCTRL_XBUS_RSRVD1(v)  \
-		(((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1)
 #define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	0x00000800
 #define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
 #define BP_CLKCTRL_XBUS_DIV	0
@@ -263,19 +195,10 @@
 
 #define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
 #define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BM_CLKCTRL_XTAL_RSRVD3	0x40000000
 #define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
 #define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BP_CLKCTRL_XTAL_RSRVD2	27
-#define BM_CLKCTRL_XTAL_RSRVD2	0x18000000
-#define BF_CLKCTRL_XTAL_RSRVD2(v)  \
-		(((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2)
 #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_RSRVD1	2
-#define BM_CLKCTRL_XTAL_RSRVD1	0x03FFFFFC
-#define BF_CLKCTRL_XTAL_RSRVD1(v)  \
-		(((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
 #define BP_CLKCTRL_XTAL_DIV_UART	0
 #define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
 #define BF_CLKCTRL_XTAL_DIV_UART(v)  \
@@ -285,12 +208,7 @@
 
 #define BP_CLKCTRL_SSP0_CLKGATE	31
 #define BM_CLKCTRL_SSP0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP0_RSRVD2	0x40000000
 #define BM_CLKCTRL_SSP0_BUSY	0x20000000
-#define BP_CLKCTRL_SSP0_RSRVD1	10
-#define BM_CLKCTRL_SSP0_RSRVD1	0x1FFFFC00
-#define BF_CLKCTRL_SSP0_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1)
 #define BM_CLKCTRL_SSP0_DIV_FRAC_EN	0x00000200
 #define BP_CLKCTRL_SSP0_DIV	0
 #define BM_CLKCTRL_SSP0_DIV	0x000001FF
@@ -301,12 +219,7 @@
 
 #define BP_CLKCTRL_SSP1_CLKGATE	31
 #define BM_CLKCTRL_SSP1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP1_RSRVD2	0x40000000
 #define BM_CLKCTRL_SSP1_BUSY	0x20000000
-#define BP_CLKCTRL_SSP1_RSRVD1	10
-#define BM_CLKCTRL_SSP1_RSRVD1	0x1FFFFC00
-#define BF_CLKCTRL_SSP1_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1)
 #define BM_CLKCTRL_SSP1_DIV_FRAC_EN	0x00000200
 #define BP_CLKCTRL_SSP1_DIV	0
 #define BM_CLKCTRL_SSP1_DIV	0x000001FF
@@ -317,12 +230,7 @@
 
 #define BP_CLKCTRL_SSP2_CLKGATE	31
 #define BM_CLKCTRL_SSP2_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP2_RSRVD2	0x40000000
 #define BM_CLKCTRL_SSP2_BUSY	0x20000000
-#define BP_CLKCTRL_SSP2_RSRVD1	10
-#define BM_CLKCTRL_SSP2_RSRVD1	0x1FFFFC00
-#define BF_CLKCTRL_SSP2_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1)
 #define BM_CLKCTRL_SSP2_DIV_FRAC_EN	0x00000200
 #define BP_CLKCTRL_SSP2_DIV	0
 #define BM_CLKCTRL_SSP2_DIV	0x000001FF
@@ -333,12 +241,7 @@
 
 #define BP_CLKCTRL_SSP3_CLKGATE	31
 #define BM_CLKCTRL_SSP3_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP3_RSRVD2	0x40000000
 #define BM_CLKCTRL_SSP3_BUSY	0x20000000
-#define BP_CLKCTRL_SSP3_RSRVD1	10
-#define BM_CLKCTRL_SSP3_RSRVD1	0x1FFFFC00
-#define BF_CLKCTRL_SSP3_RSRVD1(v)  \
-		(((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1)
 #define BM_CLKCTRL_SSP3_DIV_FRAC_EN	0x00000200
 #define BP_CLKCTRL_SSP3_DIV	0
 #define BM_CLKCTRL_SSP3_DIV	0x000001FF
@@ -349,12 +252,7 @@
 
 #define BP_CLKCTRL_GPMI_CLKGATE	31
 #define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_RSRVD2	0x40000000
 #define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BP_CLKCTRL_GPMI_RSRVD1	11
-#define BM_CLKCTRL_GPMI_RSRVD1	0x1FFFF800
-#define BF_CLKCTRL_GPMI_RSRVD1(v)  \
-		(((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
 #define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
 #define BP_CLKCTRL_GPMI_DIV	0
 #define BM_CLKCTRL_GPMI_DIV	0x000003FF
@@ -365,10 +263,6 @@
 
 #define BP_CLKCTRL_SPDIF_CLKGATE	31
 #define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-#define BP_CLKCTRL_SPDIF_RSRVD	0
-#define BM_CLKCTRL_SPDIF_RSRVD	0x7FFFFFFF
-#define BF_CLKCTRL_SPDIF_RSRVD(v)  \
-		(((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
 
 #define HW_CLKCTRL_EMI	(0x000000f0)
 
@@ -379,24 +273,12 @@
 #define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
 #define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BP_CLKCTRL_EMI_RSRVD3	18
-#define BM_CLKCTRL_EMI_RSRVD3	0x03FC0000
-#define BF_CLKCTRL_EMI_RSRVD3(v)  \
-		(((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
 #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_RSRVD2	12
-#define BM_CLKCTRL_EMI_RSRVD2	0x0000F000
-#define BF_CLKCTRL_EMI_RSRVD2(v)  \
-		(((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
 #define BP_CLKCTRL_EMI_DIV_XTAL	8
 #define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
 #define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
 		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_RSRVD1	6
-#define BM_CLKCTRL_EMI_RSRVD1	0x000000C0
-#define BF_CLKCTRL_EMI_RSRVD1(v)  \
-		(((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
 #define BP_CLKCTRL_EMI_DIV_EMI	0
 #define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
 #define BF_CLKCTRL_EMI_DIV_EMI(v)  \
@@ -406,12 +288,7 @@
 
 #define BP_CLKCTRL_SAIF0_CLKGATE	31
 #define BM_CLKCTRL_SAIF0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF0_RSRVD2	0x40000000
 #define BM_CLKCTRL_SAIF0_BUSY	0x20000000
-#define BP_CLKCTRL_SAIF0_RSRVD1	17
-#define BM_CLKCTRL_SAIF0_RSRVD1	0x1FFE0000
-#define BF_CLKCTRL_SAIF0_RSRVD1(v)  \
-		(((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1)
 #define BM_CLKCTRL_SAIF0_DIV_FRAC_EN	0x00010000
 #define BP_CLKCTRL_SAIF0_DIV	0
 #define BM_CLKCTRL_SAIF0_DIV	0x0000FFFF
@@ -422,12 +299,7 @@
 
 #define BP_CLKCTRL_SAIF1_CLKGATE	31
 #define BM_CLKCTRL_SAIF1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF1_RSRVD2	0x40000000
 #define BM_CLKCTRL_SAIF1_BUSY	0x20000000
-#define BP_CLKCTRL_SAIF1_RSRVD1	17
-#define BM_CLKCTRL_SAIF1_RSRVD1	0x1FFE0000
-#define BF_CLKCTRL_SAIF1_RSRVD1(v)  \
-		(((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1)
 #define BM_CLKCTRL_SAIF1_DIV_FRAC_EN	0x00010000
 #define BP_CLKCTRL_SAIF1_DIV	0
 #define BM_CLKCTRL_SAIF1_DIV	0x0000FFFF
@@ -438,12 +310,7 @@
 
 #define BP_CLKCTRL_DIS_LCDIF_CLKGATE	31
 #define BM_CLKCTRL_DIS_LCDIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_RSRVD2	0x40000000
 #define BM_CLKCTRL_DIS_LCDIF_BUSY	0x20000000
-#define BP_CLKCTRL_DIS_LCDIF_RSRVD1	14
-#define BM_CLKCTRL_DIS_LCDIF_RSRVD1	0x1FFFC000
-#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v)  \
-		(((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1)
 #define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN	0x00002000
 #define BP_CLKCTRL_DIS_LCDIF_DIV	0
 #define BM_CLKCTRL_DIS_LCDIF_DIV	0x00001FFF
@@ -453,12 +320,7 @@
 #define HW_CLKCTRL_ETM	(0x00000130)
 
 #define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_RSRVD2	0x40000000
 #define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BP_CLKCTRL_ETM_RSRVD1	8
-#define BM_CLKCTRL_ETM_RSRVD1	0x1FFFFF00
-#define BF_CLKCTRL_ETM_RSRVD1(v)  \
-		(((v) << 8) & BM_CLKCTRL_ETM_RSRVD1)
 #define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000080
 #define BP_CLKCTRL_ETM_DIV	0
 #define BM_CLKCTRL_ETM_DIV	0x0000007F
@@ -471,7 +333,6 @@
 #define BP_CLKCTRL_ENET_DISABLE	30
 #define BM_CLKCTRL_ENET_DISABLE	0x40000000
 #define BM_CLKCTRL_ENET_STATUS	0x20000000
-#define BM_CLKCTRL_ENET_RSRVD1	0x10000000
 #define BM_CLKCTRL_ENET_BUSY_TIME	0x08000000
 #define BP_CLKCTRL_ENET_DIV_TIME	21
 #define BM_CLKCTRL_ENET_DIV_TIME	0x07E00000
@@ -493,37 +354,23 @@
 #define BM_CLKCTRL_ENET_CLK_OUT_EN	0x00040000
 #define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP	0x00020000
 #define BM_CLKCTRL_ENET_RESET_BY_SW	0x00010000
-#define BP_CLKCTRL_ENET_RSRVD0	0
-#define BM_CLKCTRL_ENET_RSRVD0	0x0000FFFF
-#define BF_CLKCTRL_ENET_RSRVD0(v)  \
-		(((v) << 0) & BM_CLKCTRL_ENET_RSRVD0)
 
 #define HW_CLKCTRL_HSADC	(0x00000150)
 
-#define BM_CLKCTRL_HSADC_RSRVD2	0x80000000
 #define BM_CLKCTRL_HSADC_RESETB	0x40000000
 #define BP_CLKCTRL_HSADC_FREQDIV	28
 #define BM_CLKCTRL_HSADC_FREQDIV	0x30000000
 #define BF_CLKCTRL_HSADC_FREQDIV(v)  \
 		(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-#define BP_CLKCTRL_HSADC_RSRVD1	0
-#define BM_CLKCTRL_HSADC_RSRVD1	0x0FFFFFFF
-#define BF_CLKCTRL_HSADC_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1)
 
 #define HW_CLKCTRL_FLEXCAN	(0x00000160)
 
-#define BM_CLKCTRL_FLEXCAN_RSRVD2	0x80000000
 #define BP_CLKCTRL_FLEXCAN_STOP_CAN0	30
 #define BM_CLKCTRL_FLEXCAN_STOP_CAN0	0x40000000
 #define BM_CLKCTRL_FLEXCAN_CAN0_STATUS	0x20000000
 #define BP_CLKCTRL_FLEXCAN_STOP_CAN1	28
 #define BM_CLKCTRL_FLEXCAN_STOP_CAN1	0x10000000
 #define BM_CLKCTRL_FLEXCAN_CAN1_STATUS	0x08000000
-#define BP_CLKCTRL_FLEXCAN_RSRVD1	0
-#define BM_CLKCTRL_FLEXCAN_RSRVD1	0x07FFFFFF
-#define BF_CLKCTRL_FLEXCAN_RSRVD1(v)  \
-		(((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1)
 
 #define HW_CLKCTRL_FRAC0	(0x000001b0)
 #define HW_CLKCTRL_FRAC0_SET	(0x000001b4)
@@ -564,10 +411,6 @@
 #define HW_CLKCTRL_FRAC1_CLR	(0x000001c8)
 #define HW_CLKCTRL_FRAC1_TOG	(0x000001cc)
 
-#define BP_CLKCTRL_FRAC1_RSRVD2	24
-#define BM_CLKCTRL_FRAC1_RSRVD2	0xFF000000
-#define BF_CLKCTRL_FRAC1_RSRVD2(v) \
-		(((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2)
 #define BP_CLKCTRL_FRAC1_CLKGATEGPMI	23
 #define BM_CLKCTRL_FRAC1_CLKGATEGPMI	0x00800000
 #define BM_CLKCTRL_FRAC1_GPMI_STABLE	0x00400000
@@ -595,22 +438,10 @@
 #define HW_CLKCTRL_CLKSEQ_CLR	(0x000001d8)
 #define HW_CLKCTRL_CLKSEQ_TOG	(0x000001dc)
 
-#define BP_CLKCTRL_CLKSEQ_RSRVD0	19
-#define BM_CLKCTRL_CLKSEQ_RSRVD0	0xFFF80000
-#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \
-		(((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0)
 #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00040000
-#define BP_CLKCTRL_CLKSEQ_RSRVD1	15
-#define BM_CLKCTRL_CLKSEQ_RSRVD1	0x00038000
-#define BF_CLKCTRL_CLKSEQ_RSRVD1(v)  \
-		(((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1)
 #define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF	0x00004000
 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD    0x0
-#define BP_CLKCTRL_CLKSEQ_RSRVD2	9
-#define BM_CLKCTRL_CLKSEQ_RSRVD2	0x00003E00
-#define BF_CLKCTRL_CLKSEQ_RSRVD2(v)  \
-		(((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2)
 #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000080
 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3	0x00000040
@@ -623,10 +454,6 @@
 
 #define HW_CLKCTRL_RESET	(0x000001e0)
 
-#define BP_CLKCTRL_RESET_RSRVD	6
-#define BM_CLKCTRL_RESET_RSRVD	0xFFFFFFC0
-#define BF_CLKCTRL_RESET_RSRVD(v) \
-		(((v) << 6) & BM_CLKCTRL_RESET_RSRVD)
 #define BM_CLKCTRL_RESET_WDOG_POR_DISABLE	0x00000020
 #define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	0x00000010
 #define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE	0x00000008
@@ -640,10 +467,6 @@
 #define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
 		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-#define BP_CLKCTRL_STATUS_RSRVD	0
-#define BM_CLKCTRL_STATUS_RSRVD	0x3FFFFFFF
-#define BF_CLKCTRL_STATUS_RSRVD(v)  \
-		(((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
 
 #define HW_CLKCTRL_VERSION	(0x00000200)
 
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index 9343d7e..20ec3bd 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/proc-fns.h>
 #include <asm/system.h>
@@ -135,3 +136,4 @@
 	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
 	return -ETIMEDOUT;
 }
+EXPORT_SYMBOL(mxs_reset_block);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 8dc2c76..986c3bf 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <mach/bridge-regs.h>
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
 #include <plat/ehci-orion.h>
@@ -599,6 +600,11 @@
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+void __init orion5x_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+}
+
 int orion5x_tclk;
 
 int __init orion5x_find_tclk(void)
@@ -616,7 +622,9 @@
 static void orion5x_timer_init(void)
 {
 	orion5x_tclk = orion5x_find_tclk();
-	orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk);
+
+	orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_ORION5X_BRIDGE, orion5x_tclk);
 }
 
 struct sys_timer orion5x_timer = {
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 8f00450..f2b2b35 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -9,6 +9,7 @@
  * Basic Orion init functions used early by machine-setup.
  */
 void orion5x_map_io(void);
+void orion5x_init_early(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
 extern int orion5x_tclk;
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index b1c451f..4258075 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -339,6 +339,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
@@ -350,6 +351,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index df1083f..c10a117 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -361,6 +361,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3a7bc0e..90ab022 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -733,6 +733,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index ba98459..d037a90 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -254,6 +254,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= edmini_v2_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 5c9744c..96484bc 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -22,14 +22,12 @@
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
 
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+
 #define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
 
-#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
 #define WDT_INT_REQ		0x0008
 
-#define BRIDGE_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x114)
-#define BRIDGE_INT_TIMER0	0x0002
-#define BRIDGE_INT_TIMER1	0x0004
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
index d8182e8..a1d0b78 100644
--- a/arch/arm/mach-orion5x/include/mach/gpio.h
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -6,32 +6,4 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <mach/irqs.h>
 #include <plat/gpio.h>
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-#define GPIO_MAX		32
-#define GPIO_OUT(pin)		ORION5X_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF(pin)	ORION5X_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN(pin)	ORION5X_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL(pin)	ORION5X_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN(pin)	ORION5X_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE(pin)	ORION5X_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK(pin)	ORION5X_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK(pin)	ORION5X_DEV_BUS_REG(0x11c)
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_ORION5X_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_ORION5X_GPIO_START;
-}
-
-
-#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2d87665..0a28bbc 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -73,6 +73,7 @@
 #define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
 #define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
 #define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  GPIO_VIRT_BASE			ORION5X_DEV_BUS_REG(0x0100)
 #define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
 #define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index d7512b9..ed85891f 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -28,27 +28,12 @@
 
 void __init orion5x_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
 
 	/*
-	 * Mask and clear GPIO IRQ interrupts
+	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	writel(0x0, GPIO_LEVEL_MASK(0));
-	writel(0x0, GPIO_EDGE_MASK(0));
-	writel(0x0, GPIO_EDGE_CAUSE(0));
-
-	/*
-	 * Register chained level handlers for GPIO IRQs by default.
-	 * User can use set_type() if he wants to use edge types handlers.
-	 */
-	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		irq_desc[i].status |= IRQ_LEVEL;
-		set_irq_flags(i, IRQF_VALID);
-	}
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
 	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
 	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 4be9aa0..47497c7 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -382,6 +382,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
@@ -394,6 +395,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 20a9b66..6ae12aa 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -321,6 +321,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 437364b..7adafd7 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -268,6 +268,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index ab9b0cf..869958f 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -270,6 +270,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= lsmini_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index db485d3..2288207 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,9 +124,6 @@
 	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
 	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
 
-	/* Initialize gpiolib. */
-	orion_gpio_init();
-
 	for ( ; mode->mpp >= 0; mode++) {
 		u32 *reg;
 		int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 2f0e16c..b43b208 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -264,6 +264,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= mss2_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b3d90f2..c55d071 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -232,6 +232,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index d6665b3..429ecaf 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -422,6 +422,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index f4c26fd..34310ab 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -172,6 +172,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b594290..c1f79fa 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -184,6 +184,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 165ed870..67ec695 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -308,6 +308,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 02ff45f..b080c69 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -126,6 +126,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 4403fae..5653ee6 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -361,6 +361,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 1e19612..8bbd27e 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -325,6 +325,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 428af20..92f393f 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -314,6 +314,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 37b3d48..151e89e 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -1,3 +1,4 @@
+#define TS7800_FPGA_MAGIC 0x00b480
 #define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
 
 /*
@@ -6,11 +7,15 @@
  */
 enum fpga_ids {
 	/* Technologic Systems */
-	TS7800_REV_1	= FPGAID(0x00b480, 0x01),
-	TS7800_REV_2	= FPGAID(0x00b480, 0x02),
-	TS7800_REV_3	= FPGAID(0x00b480, 0x03),
-	TS7800_REV_4	= FPGAID(0x00b480, 0x04),
-	TS7800_REV_5	= FPGAID(0x00b480, 0x05),
+	TS7800_REV_1	= FPGAID(TS7800_FPGA_MAGIC, 0x01),
+	TS7800_REV_2	= FPGAID(TS7800_FPGA_MAGIC, 0x02),
+	TS7800_REV_3	= FPGAID(TS7800_FPGA_MAGIC, 0x03),
+	TS7800_REV_4	= FPGAID(TS7800_FPGA_MAGIC, 0x04),
+	TS7800_REV_5	= FPGAID(TS7800_FPGA_MAGIC, 0x05),
+	TS7800_REV_6	= FPGAID(TS7800_FPGA_MAGIC, 0x06),
+	TS7800_REV_7	= FPGAID(TS7800_FPGA_MAGIC, 0x07),
+	TS7800_REV_8	= FPGAID(TS7800_FPGA_MAGIC, 0x08),
+	TS7800_REV_9	= FPGAID(TS7800_FPGA_MAGIC, 0x09),
 
 	/* Unaffordable & Expensive */
 	UAE_DUMMY	= FPGAID(0xffffff, 0x01),
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index c1c1cd0..8554707 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -191,6 +191,60 @@
 	return readb(TS_NAND_CTRL) & 0x20;
 }
 
+static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
+			const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_W;
+	unsigned long off = ((unsigned long)buf & 3);
+	int sz;
+
+	if (off) {
+		sz = min_t(int, 4 - off, len);
+		writesb(io_base, buf, sz);
+		buf += sz;
+		len -= sz;
+	}
+
+	sz = len >> 2;
+	if (sz) {
+		u32 *buf32 = (u32 *)buf;
+		writesl(io_base, buf32, sz);
+		buf += sz << 2;
+		len -= sz << 2;
+	}
+
+	if (len)
+		writesb(io_base, buf, len);
+}
+
+static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
+			uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_R;
+	unsigned long off = ((unsigned long)buf & 3);
+	int sz;
+
+	if (off) {
+		sz = min_t(int, 4 - off, len);
+		readsb(io_base, buf, sz);
+		buf += sz;
+		len -= sz;
+	}
+
+	sz = len >> 2;
+	if (sz) {
+		u32 *buf32 = (u32 *)buf;
+		readsl(io_base, buf32, sz);
+		buf += sz << 2;
+		len -= sz << 2;
+	}
+
+	if (len)
+		readsb(io_base, buf, len);
+}
+
 const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
 
 static struct mtd_partition ts78xx_ts_nand_parts[] = {
@@ -233,6 +287,8 @@
 		 */
 		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
 		.dev_ready		= ts78xx_ts_nand_dev_ready,
+		.write_buf		= ts78xx_ts_nand_write_buf,
+		.read_buf		= ts78xx_ts_nand_read_buf,
 	},
 };
 
@@ -334,14 +390,29 @@
 	case TS7800_REV_3:
 	case TS7800_REV_4:
 	case TS7800_REV_5:
+	case TS7800_REV_6:
+	case TS7800_REV_7:
+	case TS7800_REV_8:
+	case TS7800_REV_9:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
 		ts78xx_fpga.supports.ts_rng.present = 1;
 		break;
 	default:
-		ts78xx_fpga.supports.ts_rtc.present = 0;
-		ts78xx_fpga.supports.ts_nand.present = 0;
-		ts78xx_fpga.supports.ts_rng.present = 0;
+		/* enable devices if magic matches */
+		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
+		case TS7800_FPGA_MAGIC:
+			printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+					ts78xx_fpga.id & 0xff);
+			ts78xx_fpga.supports.ts_rtc.present = 1;
+			ts78xx_fpga.supports.ts_nand.present = 1;
+			ts78xx_fpga.supports.ts_rng.present = 1;
+			break;
+		default:
+			ts78xx_fpga.supports.ts_rtc.present = 0;
+			ts78xx_fpga.supports.ts_nand.present = 0;
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
 	}
 }
 
@@ -553,6 +624,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7994d6e..4e5216b 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -175,6 +175,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index a5989b7..fab79d0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -263,6 +263,7 @@
 	.boot_params	= 0x00000100,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
 	.init_irq	= orion5x_init_irq,
 	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 1748fbc..5c0fabf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,22 +12,20 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
 #include "devices-db8500.h"
 
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-};
-
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
@@ -89,6 +87,51 @@
 		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
 }
 
+static struct resource db8500_pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_DB8500_PMU,
+		.end		= IRQ_DB8500_PMU,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * The PMU IRQ lines of two cores are wired together into a single interrupt.
+ * Bounce the interrupt to the other core if it's not ours.
+ */
+static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
+{
+	irqreturn_t ret = handler(irq, dev);
+	int other = !smp_processor_id();
+
+	if (ret == IRQ_NONE && cpu_online(other))
+		irq_set_affinity(irq, cpumask_of(other));
+
+	/*
+	 * We should be able to get away with the amount of IRQ_NONEs we give,
+	 * while still having the spurious IRQ detection code kick in if the
+	 * interrupt really starts hitting spuriously.
+	 */
+	return ret;
+}
+
+static struct arm_pmu_platdata db8500_pmu_platdata = {
+	.handle_irq		= db8500_pmu_handler,
+};
+
+static struct platform_device db8500_pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
+	.resource		= db8500_pmu_resources,
+	.dev.platform_data	= &db8500_pmu_platdata,
+};
+
+static struct platform_device *platform_devs[] __initdata = {
+	&u8500_dma40_device,
+	&db8500_pmu_device,
+};
+
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e4509ba..2bd4ccf 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -811,7 +811,7 @@
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
+		   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
 		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
 	default y
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 389f217..b0cb425 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -33,6 +33,7 @@
 config ARCH_MXC91231
 	bool "MXC91231-based"
 	select CPU_V6
+	select MXC_AVIC
 	help
 	  This enables support for systems based on the Freescale MXC91231 family
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 5fd20e9..a138787 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
-obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index e9bcefe..eee1b60 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -81,6 +81,8 @@
 	ret = platform_device_add(pdev);
 	if (ret) {
 err:
+		if (dmamask)
+			kfree(pdev->dev.dma_mask);
 		platform_device_put(pdev);
 		return ERR_PTR(ret);
 	}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index b50c351..6561c9d 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -31,6 +31,11 @@
 	imx_fec_data_entry_single(MX35);
 #endif
 
+#ifdef CONFIG_SOC_IMX50
+const struct imx_fec_data imx50_fec_data __initconst =
+	imx_fec_data_entry_single(MX50);
+#endif
+
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fec_data imx51_fec_data __initconst =
 	imx_fec_data_entry_single(MX51);
@@ -57,7 +62,7 @@
 		},
 	};
 
-	return imx_add_platform_device("fec", 0 /* -1? */,
+	return imx_add_platform_device_dmamask("fec", 0,
 			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 33530d2..3538b85e 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -94,7 +94,7 @@
 };
 #endif
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 static struct sdma_script_start_addrs addr_imx31_to1 = {
 	.per_2_per_addr = 1677,
 };
@@ -106,7 +106,7 @@
 };
 #endif
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 static struct sdma_script_start_addrs addr_imx35_to1 = {
 	.ap_2_ap_addr = 642,
 	.uart_2_mcu_addr = 817,
@@ -194,7 +194,7 @@
 	} else
 #endif
 
-#if defined(CONFIG_ARCH_MX51)
+#if defined(CONFIG_SOC_IMX51)
 	if (cpu_is_mx51()) {
 		imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
 		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c
index 6100a7d..79a1cb1 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-fb.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c
@@ -16,6 +16,11 @@
 		.irq = soc ## _INT_LCDC,				\
 	}
 
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX1, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, SZ_4K);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index 7ba94e1..2ab74f0 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -69,6 +69,16 @@
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
+#ifdef CONFIG_SOC_IMX50
+const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
+#define imx50_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
+	imx50_imx_i2c_data_entry(0, 1),
+	imx50_imx_i2c_data_entry(1, 2),
+	imx50_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\
diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
index e0aec61..5e07ef2 100644
--- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
+++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
@@ -53,6 +53,15 @@
 };
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
+#define imx53_imx2_wdt_data_entry(_id, _hwid)				\
+	imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
+	imx53_imx2_wdt_data_entry(0, 1),
+	imx53_imx2_wdt_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
 struct platform_device *__init imx_add_imx2_wdt(
 		const struct imx_imx2_wdt_data *data)
 {
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 013c85f..f4a60ab 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -21,6 +21,15 @@
 #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
 	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
 
+#ifdef CONFIG_SOC_IMX1
+const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
+#define imx1_cspi_data_entry(_id, _hwid) \
+	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
+	imx1_cspi_data_entry(0, 1),
+	imx1_cspi_data_entry(1, 2),
+};
+#endif
+
 #ifdef CONFIG_SOC_IMX21
 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 #define imx21_cspi_data_entry(_id, _hwid)                            \
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
deleted file mode 100644
index 8772ce3..0000000
--- a/arch/arm/plat-mxc/ehci.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT		(1 << 8)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-
-#define MXC_OTG_OFFSET		0
-#define MXC_H1_OFFSET		0x200
-#define MXC_H2_OFFSET		0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET			0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
-int mxc_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-#if defined(CONFIG_SOC_IMX25)
-	if (cpu_is_mx25()) {
-		v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-#endif /* if defined(CONFIG_SOC_IMX25) */
-#if defined(CONFIG_ARCH_MX3)
-	if (cpu_is_mx31()) {
-		v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-
-	if (cpu_is_mx35()) {
-		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-#endif /* CONFIG_ARCH_MX3 */
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27()) {
-		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
-		 * are identical
-		 */
-		v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-		writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-#endif /* CONFIG_MACH_MX27 */
-#ifdef CONFIG_SOC_IMX51
-	if (cpu_is_mx51()) {
-		void __iomem *usb_base;
-		void __iomem *usbotg_base;
-		void __iomem *usbother_base;
-		int ret = 0;
-
-		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
-		if (!usb_base) {
-			printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-			return -ENOMEM;
-		}
-
-		switch (port) {
-		case 0:	/* OTG port */
-			usbotg_base = usb_base + MXC_OTG_OFFSET;
-			break;
-		case 1:	/* Host 1 port */
-			usbotg_base = usb_base + MXC_H1_OFFSET;
-			break;
-		case 2: /* Host 2 port */
-			usbotg_base = usb_base + MXC_H2_OFFSET;
-			break;
-		default:
-			printk(KERN_ERR"%s no such port %d\n", __func__, port);
-			ret = -ENOENT;
-			goto error;
-		}
-		usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-		switch (port) {
-		case 0:	/*OTG port */
-			if (flags & MXC_EHCI_INTERNAL_PHY) {
-				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-					/* OC/USBPWR is not used */
-					v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				} else {
-					/* OC/USBPWR is used */
-					v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				}
-				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-				if (flags & MXC_EHCI_WAKEUP_ENABLED)
-					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-				else
-					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-					v |= MXC_OTG_UCTRL_OPM_BIT;
-				else
-					v &= ~MXC_OTG_UCTRL_OPM_BIT;
-				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-			}
-			break;
-		case 1:	/* Host 1 */
-			/*Host ULPI */
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			else
-				v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-			else
-				v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-			if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-				/* Interrupt Threshold Control:Immediate (no threshold) */
-				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-			break;
-		case 2: /* Host 2 ULPI */
-			v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			else
-				v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-			break;
-		}
-
-error:
-		iounmap(usb_base);
-		return ret;
-	}
-#endif
-	printk(KERN_WARNING
-		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
-	return -EINVAL;
-}
-EXPORT_SYMBOL(mxc_initialize_usb_hw);
-
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d17b3c9..57d5985 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -233,6 +233,7 @@
 }
 
 static struct irq_chip gpio_irq_chip = {
+	.name = "GPIO",
 	.irq_ack = gpio_ack_irq,
 	.irq_mask = gpio_mask_irq,
 	.irq_unmask = gpio_unmask_irq,
@@ -349,113 +350,3 @@
 
 	return 0;
 }
-
-#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
-	{								\
-		.chip.label = "gpio-" #_id,				\
-		.irq = _irq,						\
-		.irq_high = _irq_high,					\
-		.base = soc ## _IO_ADDRESS(				\
-				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
-	}
-
-#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
-#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
-	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
-
-#define DEFINE_REGISTER_FUNCTION(prefix)				\
-int __init prefix ## _register_gpios(void)				\
-{									\
-	return mxc_gpio_init(prefix ## _gpio_ports,			\
-			ARRAY_SIZE(prefix ## _gpio_ports));		\
-}
-
-#if defined(CONFIG_SOC_IMX1)
-static struct mxc_gpio_port imx1_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
-};
-
-DEFINE_REGISTER_FUNCTION(imx1)
-
-#endif /* if defined(CONFIG_SOC_IMX1) */
-
-#if defined(CONFIG_SOC_IMX21)
-static struct mxc_gpio_port imx21_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
-};
-
-DEFINE_REGISTER_FUNCTION(imx21)
-
-#endif /* if defined(CONFIG_SOC_IMX21) */
-
-#if defined(CONFIG_SOC_IMX25)
-static struct mxc_gpio_port imx25_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
-};
-
-DEFINE_REGISTER_FUNCTION(imx25)
-
-#endif /* if defined(CONFIG_SOC_IMX25) */
-
-#if defined(CONFIG_SOC_IMX27)
-static struct mxc_gpio_port imx27_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
-};
-
-DEFINE_REGISTER_FUNCTION(imx27)
-
-#endif /* if defined(CONFIG_SOC_IMX27) */
-
-#if defined(CONFIG_SOC_IMX31)
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
-DEFINE_REGISTER_FUNCTION(imx31)
-
-#endif /* if defined(CONFIG_SOC_IMX31) */
-
-#if defined(CONFIG_SOC_IMX35)
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
-DEFINE_REGISTER_FUNCTION(imx35)
-
-#endif /* if defined(CONFIG_SOC_IMX35) */
-
-#if defined(CONFIG_SOC_IMX50)
-static struct mxc_gpio_port imx50_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
-DEFINE_REGISTER_FUNCTION(imx50)
-
-#endif /* if defined(CONFIG_SOC_IMX50) */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index aea2cd3..a22ebe1 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -24,6 +24,16 @@
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
 extern void mxc91231_map_io(void);
+extern void imx1_init_early(void);
+extern void imx21_init_early(void);
+extern void imx25_init_early(void);
+extern void imx27_init_early(void);
+extern void imx31_init_early(void);
+extern void imx35_init_early(void);
+extern void imx50_init_early(void);
+extern void imx51_init_early(void);
+extern void imx53_init_early(void);
+extern void mxc91231_init_early(void);
 extern void mxc_init_irq(void __iomem *);
 extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 0044e2f..a2747f1 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -46,6 +46,21 @@
 	spinlock_t lock;
 };
 
+#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
+	{								\
+		.chip.label = "gpio-" #_id,				\
+		.irq = _irq,						\
+		.irq_high = _irq_high,					\
+		.base = soc ## _IO_ADDRESS(				\
+				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
+	}
+
+#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
+#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
+	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
+
 int mxc_gpio_init(struct mxc_gpio_port*, int);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index cbaed29..c92f0b1 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,12 +112,12 @@
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
  */
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label);
 
 /*
@@ -126,12 +126,12 @@
  * 	- frees the GPIO if the pin was configured as GPIO
  * 	- DOES NOT reconfigure the IOMUX in its reset state
  */
-void mxc_iomux_release_pin(const unsigned int pin);
+void mxc_iomux_release_pin(unsigned int pin);
 /*
  * releases multiple pins
  * convenvient way to call the above function with tables
  */
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
 
 /*
  * This function enables/disables the general purpose function for a particular
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 2a24bae..3117c18 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -989,13 +989,13 @@
 #define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
 #define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
 
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6ec, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6ec, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6ec, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
 #define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
index 058a922..98e7fd0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
@@ -86,7 +86,7 @@
 #define MX50_PAD_I2C1_SCL__I2C1_SCL	IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
 							MX50_I2C_PAD_CTRL)
 #define MX50_PAD_I2C1_SCL__GPIO_6_18	IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__UART2_TXD	IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C1_SCL__UART2_TXD	IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL)
 
 #define MX50_PAD_I2C1_SDA__I2C1_SDA	IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
 							MX50_I2C_PAD_CTRL)
@@ -96,7 +96,7 @@
 #define MX50_PAD_I2C2_SCL__I2C2_SCL	IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
 							MX50_I2C_PAD_CTRL)
 #define MX50_PAD_I2C2_SCL__GPIO_6_20	IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__UART2_CTS	IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__UART2_CTS	IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_I2C2_SCL__DCDC_OK	IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
 
 #define MX50_PAD_I2C2_SDA__I2C2_SDA	IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
@@ -172,7 +172,7 @@
 
 #define MX50_PAD_SSI_RXFS__AUD3_RXFS	IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_SSI_RXFS__GPIO_6_4	IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__UART5_TXD	IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__UART5_TXD	IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_SSI_RXFS__WEIM_D6	IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
 #define MX50_PAD_SSI_RXFS__CSPI_SS2	IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
 #define MX50_PAD_SSI_RXFS__FEC_COL	IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
@@ -186,25 +186,25 @@
 #define MX50_PAD_SSI_RXC__FEC_RX_CLK	IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
 #define MX50_PAD_SSI_RXC__FEC_MDIO	IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
 
-#define MX50_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART1_TXD__GPIO_6_6	IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
 
 #define MX50_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART1_RXD__GPIO_6_7	IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
 
-#define MX50_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART1_CTS__GPIO_6_8	IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__UART5_TXD	IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__UART5_TXD	IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART1_CTS__SD4_D4	IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART1_CTS__SD4_CMD	IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
 
 #define MX50_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART1_RTS__GPIO_6_9	IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_UART1_RTS__UART5_RXD	IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_D5	IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_CLK	IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_D5	IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_CLK	IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL)
 
-#define MX50_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART2_TXD__GPIO_6_10	IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_UART2_TXD__SD4_D6	IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART2_TXD__SD4_D4	IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
@@ -214,7 +214,7 @@
 #define MX50_PAD_UART2_RXD__SD4_D7	IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART2_RXD__SD4_D5	IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
 
-#define MX50_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART2_CTS__GPIO_6_12	IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_UART2_CTS__SD4_CMD	IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART2_CTS__SD4_D6	IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
@@ -224,7 +224,7 @@
 #define MX50_PAD_UART2_RTS__SD4_CLK	IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART2_RTS__SD4_D7	IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
 
-#define MX50_PAD_UART3_TXD__UART3_TXD	IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__UART3_TXD	IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART3_TXD__GPIO_6_14	IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_UART3_TXD__SD1_D4	IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART3_TXD__SD4_D0	IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
@@ -238,9 +238,9 @@
 #define MX50_PAD_UART3_RXD__SD2_CD	IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART3_RXD__WEIM_D13	IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
 
-#define MX50_PAD_UART4_TXD__UART4_TXD	IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__UART4_TXD	IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART4_TXD__GPIO_6_16	IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__UART3_CTS	IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__UART3_CTS	IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_UART4_TXD__SD1_D6	IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART4_TXD__SD4_D2	IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
 #define MX50_PAD_UART4_TXD__SD2_LCTL	IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
@@ -278,7 +278,7 @@
 #define MX50_PAD_ECSPI1_MOSI__GPIO_4_13		IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI1_MOSI__CSPI_SS1		IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
 #define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1	IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS		IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS		IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7	IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI1_MOSI__WEIM_D9		IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
 
@@ -294,7 +294,7 @@
 #define MX50_PAD_ECSPI1_SS0__GPIO_4_15		IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
 #define MX50_PAD_ECSPI1_SS0__CSPI_SS3		IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
 #define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3		IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS		IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS		IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9		IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI1_SS0__WEIM_D11		IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
 
@@ -311,17 +311,17 @@
 #define MX50_PAD_ECSPI2_MOSI__GPIO_4_17		IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD		IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1	IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS		IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS		IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN		IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5	IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MOSI__WEIM_D9		IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
 
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO	IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO	IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MISO__GPIO_4_18		IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
 #define MX50_PAD_ECSPI2_MISO__ELCDIF_RS		IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2	IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD		IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC	IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD		IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC	IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MISO__NANDF_CEN6	IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_ECSPI2_MISO__WEIM_D10		IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
 
@@ -503,7 +503,7 @@
 #define MX50_PAD_DISP_RD__ELCDIF_EN	IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
 #define MX50_PAD_DISP_RD__WEIM_A25	IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
 
-#define MX50_PAD_DISP_RS__ELCDIF_RS	IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RS__ELCDIF_RS	IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
 #define MX50_PAD_DISP_RS__GPIO_2_17	IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_DISP_RS__ELCDIF_VSYNC	IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
 #define MX50_PAD_DISP_RS__WEIM_A26	IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
@@ -691,8 +691,8 @@
 
 #define MX50_PAD_EPDC_D9__EPDC_D9	IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_EPDC_D9__GPIO_3_9	IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__WEIM_D9	IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__ELCDIF_D25	IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__WEIM_D9	IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__ELCDIF_D25	IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
 
 #define MX50_PAD_EPDC_D10__EPDC_D10	IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX50_PAD_EPDC_D10__GPIO_3_10	IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index b6767f9..df6acc0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -473,7 +473,7 @@
 #define _MX51_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
 #define _MX51_PAD_UART2_TXD__FIRI_RXD		IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
 #define _MX51_PAD_UART2_TXD__GPIO1_21		IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0)
+#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__CSI1_D0		IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__GPIO1_22		IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__UART1_DTR		IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
@@ -528,7 +528,7 @@
 #define _MX51_PAD_USBH1_DATA1__UART2_RXD	IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
 #define _MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA2__GPIO1_13		IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
+#define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA3__GPIO1_14		IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA3__UART2_RTS	IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)
@@ -985,11 +985,11 @@
 #define MX51_PAD_NANDF_WE_B__GPIO3_3		(_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_WE_B__NANDF_WE_B		(_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_WE_B__PATA_DIOW		(_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0		(_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0		(_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_RE_B__GPIO3_4		(_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_RE_B__NANDF_RE_B		(_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_RE_B__PATA_DIOR		(_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1		(_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1		(_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_ALE__GPIO3_5		(_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_ALE__NANDF_ALE		(_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	(_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -999,18 +999,18 @@
 #define MX51_PAD_NANDF_WP_B__GPIO3_7		(_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_WP_B__NANDF_WP_B		(_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_WP_B__PATA_DMACK		(_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2		(_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2		(_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB0__ECSPI2_SS1		(_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB0__GPIO3_8		(_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_RB0__NANDF_RB0		(_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_RB0__PATA_DMARQ		(_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__SD3_DATA3		(_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__SD3_DATA3		(_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB1__CSPI_MOSI		(_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB1__ECSPI2_RDY		(_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB1__GPIO3_9		(_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_RB1__NANDF_RB1		(_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_RB1__PATA_IORDY		(_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__SD4_CMD		(_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__SD4_CMD		(_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB2__DISP2_WAIT		(_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		(_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_RB2__FEC_COL		(_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
@@ -1036,41 +1036,41 @@
 #define MX51_PAD_NANDF_CS2__GPIO3_18		(_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS2__NANDF_CS2		(_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS2__PATA_CS_0		(_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__SD4_CLK		(_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__SD4_CLK		(_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
 #define MX51_PAD_NANDF_CS2__USBH3_H1_DP		(_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS3__FEC_MDC		(_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
 #define MX51_PAD_NANDF_CS3__GPIO3_19		(_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS3__NANDF_CS3		(_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS3__PATA_CS_1		(_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__SD4_DAT0		(_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__SD4_DAT0		(_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_CS3__USBH3_H1_DM		(_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS4__FEC_TDATA1		(_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
 #define MX51_PAD_NANDF_CS4__GPIO3_20		(_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS4__NANDF_CS4		(_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS4__PATA_DA_0		(_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__SD4_DAT1		(_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__SD4_DAT1		(_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_CS4__USBH3_STP		(_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS5__FEC_TDATA2		(_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
 #define MX51_PAD_NANDF_CS5__GPIO3_21		(_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS5__NANDF_CS5		(_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS5__PATA_DA_1		(_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__SD4_DAT2		(_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__SD4_DAT2		(_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_CS5__USBH3_DIR		(_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS6__CSPI_SS3		(_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_CS6__FEC_TDATA3		(_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
 #define MX51_PAD_NANDF_CS6__GPIO3_22		(_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS6__NANDF_CS6		(_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS6__PATA_DA_2		(_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__SD4_DAT3		(_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__SD4_DAT3		(_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_CS7__FEC_TX_EN		(_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
 #define MX51_PAD_NANDF_CS7__GPIO3_23		(_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_CS7__NANDF_CS7		(_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__SD3_CLK		(_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__SD3_CLK		(_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
 #define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0	(_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	(_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
 #define MX51_PAD_NANDF_RDY_INT__GPIO3_24	(_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	(_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		(_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		(_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_NANDF_D15__ECSPI2_MOSI		(_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_NANDF_D15__GPIO3_25		(_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
 #define MX51_PAD_NANDF_D15__NANDF_D15		(_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1479,26 +1479,26 @@
 #define MX51_PAD_SD1_CLK__SD1_CLK		(_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
 #define MX51_PAD_SD1_DATA0__AUD5_TXD		(_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD1_DATA0__CSPI_MISO		(_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA0__SD1_DATA0		(_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA0__SD1_DATA0		(_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_EIM_DA0__EIM_DA0		(_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA1__EIM_DA1		(_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA2__EIM_DA2		(_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA3__EIM_DA3		(_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD1_DATA1__AUD5_RXD		(_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA1__SD1_DATA1		(_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA1__SD1_DATA1		(_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_EIM_DA4__EIM_DA4		(_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA5__EIM_DA5		(_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA6__EIM_DA6		(_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA7__EIM_DA7		(_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD1_DATA2__AUD5_TXC		(_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA2__SD1_DATA2		(_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA2__SD1_DATA2		(_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_EIM_DA10__EIM_DA10		(_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA11__EIM_DA11		(_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA8__EIM_DA8		(_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_EIM_DA9__EIM_DA9		(_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD1_DATA3__AUD5_TXFS		(_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD1_DATA3__CSPI_SS1		(_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__SD1_DATA3		(_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__SD1_DATA3		(_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_GPIO1_0__CSPI_SS2		(_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_GPIO1_0__GPIO1_0		(_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_GPIO1_0__SD1_CD		(_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
@@ -1517,16 +1517,16 @@
 #define MX51_PAD_SD2_CLK__SD2_CLK		(_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
 #define MX51_PAD_SD2_DATA0__CSPI_MISO		(_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_SD2_DATA0__SD1_DAT4		(_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA0__SD2_DATA0		(_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA0__SD2_DATA0		(_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_SD2_DATA1__SD1_DAT5		(_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__SD2_DATA1		(_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__SD2_DATA1		(_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_SD2_DATA1__USBH3_H2_DP		(_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD2_DATA2__SD1_DAT6		(_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__SD2_DATA2		(_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__SD2_DATA2		(_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_SD2_DATA2__USBH3_H2_DM		(_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_SD2_DATA3__CSPI_SS2		(_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
 #define MX51_PAD_SD2_DATA3__SD1_DAT7		(_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__SD2_DATA3		(_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__SD2_DATA3		(_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
 #define MX51_PAD_GPIO1_2__CCM_OUT_2		(_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_GPIO1_2__GPIO1_2		(_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX51_PAD_GPIO1_2__I2C2_SCL		(_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 68e11d7..e95d9cb 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -21,305 +21,2358 @@
 
 #include <mach/iomux-v3.h>
 
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
-	IOMUX_CONFIG_ALT0,
-	IOMUX_CONFIG_ALT1,
-	IOMUX_CONFIG_ALT2,
-	IOMUX_CONFIG_ALT3,
-	IOMUX_CONFIG_ALT4,
-	IOMUX_CONFIG_ALT5,
-	IOMUX_CONFIG_ALT6,
-	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
-} iomux_pin_cfg_t;
-
 /* These 2 defines are for pins that may not have a mux register, but could
  * have a pad setting register, and vice-versa. */
-#define NON_MUX_I	0x00
 #define NON_PAD_I	0x00
 
 #define MX53_UART_PAD_CTRL		(PAD_CTL_PKE | PAD_CTL_PUE |	\
 		PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-/* UART1 */
-#define MX53_PAD_CSI0_D10__UART1_TXD	IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_D11__UART1_RXD	IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DIOW__UART1_TXD	IOMUX_PAD(0x5F0, 0x270, 3, 0x0,	0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DMACK__UART1_RXD	IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+#define MX53_SDHC_PAD_CTRL 	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+				PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
 
-/* UART2 */
-#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD	IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DMARQ__UART2_TXD	IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DIOR__UART2_RTS	IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_INTRQ__UART2_CTS	IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+#define _MX53_PAD_GPIO_19__KPP_COL_5		IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
+#define _MX53_PAD_GPIO_19__GPIO4_5		IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__CCM_CLKO		IOMUX_PAD(0x348, 0x20, 2, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__SPDIF_OUT1	IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2	IOMUX_PAD(0x348, 0x20, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__ECSPI1_RDY	IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__FEC_TDATA_3	IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_19__SRC_INT_BOOT	IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__KPP_COL_0	IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__GPIO4_6		IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
+#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX	IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0)
+#define _MX53_PAD_KEY_COL0__ECSPI1_SCLK	IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0)
+#define _MX53_PAD_KEY_COL0__FEC_RDATA_3	IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST	IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW0__KPP_ROW_0	IOMUX_PAD(0x350, 0x28, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW0__GPIO4_7		IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	IOMUX_PAD(0x350, 0x28, 2, 0x74C, 0, 0)
+#define _MX53_PAD_KEY_ROW0__UART4_RXD_MUX	IOMUX_PAD(0x350, 0x28, 4, 0x890, 1, 0)
+#define _MX53_PAD_KEY_ROW0__ECSPI1_MOSI	IOMUX_PAD(0x350, 0x28, 5, 0x7A4, 0, 0)
+#define _MX53_PAD_KEY_ROW0__FEC_TX_ER	IOMUX_PAD(0x350, 0x28, 6, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL1__KPP_COL_1	IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL1__GPIO4_8		IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0)
+#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX	IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0)
+#define _MX53_PAD_KEY_COL1__ECSPI1_MISO	IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0)
+#define _MX53_PAD_KEY_COL1__FEC_RX_CLK	IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0)
+#define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY	IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW1__KPP_ROW_1	IOMUX_PAD(0x358, 0x30, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW1__GPIO4_9		IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	IOMUX_PAD(0x358, 0x30, 2, 0x748, 0, 0)
+#define _MX53_PAD_KEY_ROW1__UART5_RXD_MUX	IOMUX_PAD(0x358, 0x30, 4, 0x898, 1, 0)
+#define _MX53_PAD_KEY_ROW1__ECSPI1_SS0	IOMUX_PAD(0x358, 0x30, 5, 0x7A8, 0, 0)
+#define _MX53_PAD_KEY_ROW1__FEC_COL		IOMUX_PAD(0x358, 0x30, 6, 0x800, 0, 0)
+#define _MX53_PAD_KEY_ROW1__USBPHY1_RXVALID	IOMUX_PAD(0x358, 0x30, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL2__KPP_COL_2	IOMUX_PAD(0x35C, 0x34, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL2__GPIO4_10		IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL2__CAN1_TXCAN	IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL2__FEC_MDIO		IOMUX_PAD(0x35C, 0x34, 4, 0x804, 0, 0)
+#define _MX53_PAD_KEY_COL2__ECSPI1_SS1	IOMUX_PAD(0x35C, 0x34, 5, 0x7AC, 0, 0)
+#define _MX53_PAD_KEY_COL2__FEC_RDATA_2	IOMUX_PAD(0x35C, 0x34, 6, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE	IOMUX_PAD(0x35C, 0x34, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__KPP_ROW_2	IOMUX_PAD(0x360, 0x38, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__GPIO4_11	IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__CAN1_RXCAN	IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, 0)
+#define _MX53_PAD_KEY_ROW2__FEC_MDC		IOMUX_PAD(0x360, 0x38, 4, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__ECSPI1_SS2	IOMUX_PAD(0x360, 0x38, 5, 0x7B0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__FEC_TDATA_2	IOMUX_PAD(0x360, 0x38, 6, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW2__USBPHY1_RXERROR	IOMUX_PAD(0x360, 0x38, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL3__KPP_COL_3	IOMUX_PAD(0x364, 0x3C, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL3__GPIO4_12		IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL3__USBOH3_H2_DP	IOMUX_PAD(0x364, 0x3C, 2, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL3__SPDIF_IN1	IOMUX_PAD(0x364, 0x3C, 3, 0x870, 0, 0)
+#define _MX53_PAD_KEY_COL3__I2C2_SCL		IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, 0)
+#define _MX53_PAD_KEY_COL3__ECSPI1_SS3	IOMUX_PAD(0x364, 0x3C, 5, 0x7B4, 0, 0)
+#define _MX53_PAD_KEY_COL3__FEC_CRS		IOMUX_PAD(0x364, 0x3C, 6, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK	IOMUX_PAD(0x364, 0x3C, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW3__KPP_ROW_3	IOMUX_PAD(0x368, 0x40, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW3__GPIO4_13	IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW3__USBOH3_H2_DM	IOMUX_PAD(0x368, 0x40, 2, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK	IOMUX_PAD(0x368, 0x40, 3, 0x768, 0, 0)
+#define _MX53_PAD_KEY_ROW3__I2C2_SDA	IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, 0)
+#define _MX53_PAD_KEY_ROW3__OSC32K_32K_OUT	IOMUX_PAD(0x368, 0x40, 5, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW3__CCM_PLL4_BYP	IOMUX_PAD(0x368, 0x40, 6, 0x77C, 0, 0)
+#define _MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0	IOMUX_PAD(0x368, 0x40, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL4__KPP_COL_4	IOMUX_PAD(0x36C, 0x44, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL4__GPIO4_14		IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL4__CAN2_TXCAN	IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL4__IPU_SISG_4	IOMUX_PAD(0x36C, 0x44, 3, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL4__UART5_RTS	IOMUX_PAD(0x36C, 0x44, 4, 0x894, 0, 0)
+#define _MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	IOMUX_PAD(0x36C, 0x44, 5, 0x89C, 0, 0)
+#define _MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1	IOMUX_PAD(0x36C, 0x44, 7, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW4__KPP_ROW_4	IOMUX_PAD(0x370, 0x48, 0, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW4__GPIO4_15	IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW4__CAN2_RXCAN	IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0)
+#define _MX53_PAD_KEY_ROW4__IPU_SISG_5	IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW4__UART5_CTS	IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0)
+#define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR	IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0)
+#define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID	IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__GPIO4_16		IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	IOMUX_PAD(0x378, 0x4C, 2, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0	IOMUX_PAD(0x378, 0x4C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0	IOMUX_PAD(0x378, 0x4C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID	IOMUX_PAD(0x378, 0x4C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__GPIO4_17		IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	IOMUX_PAD(0x37C, 0x50, 2, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1	IOMUX_PAD(0x37C, 0x50, 5, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1	IOMUX_PAD(0x37C, 0x50, 6, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN15__USBPHY1_BVALID		IOMUX_PAD(0x37C, 0x50, 7, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__GPIO4_18			IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	IOMUX_PAD(0x380, 0x54, 2, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2	IOMUX_PAD(0x380, 0x54, 5, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2		IOMUX_PAD(0x380, 0x54, 6, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION	IOMUX_PAD(0x380, 0x54, 7, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__GPIO4_19			IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	IOMUX_PAD(0x384, 0x58, 2, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3	IOMUX_PAD(0x384, 0x58, 5, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3		IOMUX_PAD(0x384, 0x58, 6, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN3__USBPHY1_IDDIG		IOMUX_PAD(0x384, 0x58, 7, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		IOMUX_PAD(0x388, 0x5C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__GPIO4_20			IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	IOMUX_PAD(0x388, 0x5C, 2, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__ESDHC1_WP		IOMUX_PAD(0x388, 0x5C, 3, 0x7FC, 0, 0)
+#define _MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD	IOMUX_PAD(0x388, 0x5C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4		IOMUX_PAD(0x388, 0x5C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT	IOMUX_PAD(0x388, 0x5C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__GPIO4_21		IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__CSPI_SCLK		IOMUX_PAD(0x38C, 0x60, 2, 0x780, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0	IOMUX_PAD(0x38C, 0x60, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN	IOMUX_PAD(0x38C, 0x60, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5	IOMUX_PAD(0x38C, 0x60, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY	IOMUX_PAD(0x38C, 0x60, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__GPIO4_22		IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__CSPI_MOSI		IOMUX_PAD(0x390, 0x64, 2, 0x788, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1	IOMUX_PAD(0x390, 0x64, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	IOMUX_PAD(0x390, 0x64, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6	IOMUX_PAD(0x390, 0x64, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID	IOMUX_PAD(0x390, 0x64, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__GPIO4_23		IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__CSPI_MISO		IOMUX_PAD(0x394, 0x68, 2, 0x784, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2	IOMUX_PAD(0x394, 0x68, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE	IOMUX_PAD(0x394, 0x68, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7	IOMUX_PAD(0x394, 0x68, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE	IOMUX_PAD(0x394, 0x68, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__GPIO4_24		IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__CSPI_SS0		IOMUX_PAD(0x398, 0x6C, 2, 0x78C, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3	IOMUX_PAD(0x398, 0x6C, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR	IOMUX_PAD(0x398, 0x6C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8	IOMUX_PAD(0x398, 0x6C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR	IOMUX_PAD(0x398, 0x6C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__GPIO4_25		IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__CSPI_SS1		IOMUX_PAD(0x39C, 0x70, 2, 0x790, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4	IOMUX_PAD(0x39C, 0x70, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB	IOMUX_PAD(0x39C, 0x70, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9	IOMUX_PAD(0x39C, 0x70, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK	IOMUX_PAD(0x39C, 0x70, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__GPIO4_26		IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__CSPI_SS2		IOMUX_PAD(0x3A0, 0x74, 2, 0x794, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5	IOMUX_PAD(0x3A0, 0x74, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS	IOMUX_PAD(0x3A0, 0x74, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10	IOMUX_PAD(0x3A0, 0x74, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0	IOMUX_PAD(0x3A0, 0x74, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__GPIO4_27		IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__CSPI_SS3		IOMUX_PAD(0x3A4, 0x78, 2, 0x798, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6	IOMUX_PAD(0x3A4, 0x78, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE	IOMUX_PAD(0x3A4, 0x78, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11	IOMUX_PAD(0x3A4, 0x78, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1	IOMUX_PAD(0x3A4, 0x78, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__GPIO4_28		IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__CSPI_RDY		IOMUX_PAD(0x3A8, 0x7C, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7	IOMUX_PAD(0x3A8, 0x7C, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0	IOMUX_PAD(0x3A8, 0x7C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12	IOMUX_PAD(0x3A8, 0x7C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID	IOMUX_PAD(0x3A8, 0x7C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__GPIO4_29		IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__PWM1_PWMO		IOMUX_PAD(0x3AC, 0x80, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B	IOMUX_PAD(0x3AC, 0x80, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1	IOMUX_PAD(0x3AC, 0x80, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13	IOMUX_PAD(0x3AC, 0x80, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT8__USBPHY2_AVALID	IOMUX_PAD(0x3AC, 0x80, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__GPIO4_30		IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__PWM2_PWMO		IOMUX_PAD(0x3B0, 0x84, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B	IOMUX_PAD(0x3B0, 0x84, 3, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x3B0, 0x84, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14	IOMUX_PAD(0x3B0, 0x84, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0	IOMUX_PAD(0x3B0, 0x84, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__GPIO4_31		IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	IOMUX_PAD(0x3B4, 0x88, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	IOMUX_PAD(0x3B4, 0x88, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15	IOMUX_PAD(0x3B4, 0x88, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1	IOMUX_PAD(0x3B4, 0x88, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__GPIO5_5		IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	IOMUX_PAD(0x3B8, 0x8C, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	IOMUX_PAD(0x3B8, 0x8C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16	IOMUX_PAD(0x3B8, 0x8C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2	IOMUX_PAD(0x3B8, 0x8C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__GPIO5_6		IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	IOMUX_PAD(0x3BC, 0x90, 2, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	IOMUX_PAD(0x3BC, 0x90, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17	IOMUX_PAD(0x3BC, 0x90, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3	IOMUX_PAD(0x3BC, 0x90, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__GPIO5_7		IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS	IOMUX_PAD(0x3C0, 0x94, 3, 0x754, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	IOMUX_PAD(0x3C0, 0x94, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18	IOMUX_PAD(0x3C0, 0x94, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4	IOMUX_PAD(0x3C0, 0x94, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__GPIO5_8		IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC	IOMUX_PAD(0x3C4, 0x98, 3, 0x750, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	IOMUX_PAD(0x3C4, 0x98, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19	IOMUX_PAD(0x3C4, 0x98, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5	IOMUX_PAD(0x3C4, 0x98, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__GPIO5_9		IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__ECSPI1_SS1		IOMUX_PAD(0x3C8, 0x9C, 2, 0x7AC, 1, 0)
+#define _MX53_PAD_DISP0_DAT15__ECSPI2_SS1		IOMUX_PAD(0x3C8, 0x9C, 3, 0x7C8, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	IOMUX_PAD(0x3C8, 0x9C, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20	IOMUX_PAD(0x3C8, 0x9C, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6	IOMUX_PAD(0x3C8, 0x9C, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__GPIO5_10		IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__ECSPI2_MOSI		IOMUX_PAD(0x3CC, 0xA0, 2, 0x7C0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	IOMUX_PAD(0x3CC, 0xA0, 3, 0x758, 1, 0)
+#define _MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0	IOMUX_PAD(0x3CC, 0xA0, 4, 0x868, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	IOMUX_PAD(0x3CC, 0xA0, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21	IOMUX_PAD(0x3CC, 0xA0, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7	IOMUX_PAD(0x3CC, 0xA0, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__GPIO5_11		IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__ECSPI2_MISO		IOMUX_PAD(0x3D0, 0xA4, 2, 0x7BC, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	IOMUX_PAD(0x3D0, 0xA4, 3, 0x74C, 1, 0)
+#define _MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1	IOMUX_PAD(0x3D0, 0xA4, 4, 0x86C, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	IOMUX_PAD(0x3D0, 0xA4, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22	IOMUX_PAD(0x3D0, 0xA4, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__GPIO5_12		IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__ECSPI2_SS0		IOMUX_PAD(0x3D4, 0xA8, 2, 0x7C4, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	IOMUX_PAD(0x3D4, 0xA8, 3, 0x75C, 1, 0)
+#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS	IOMUX_PAD(0x3D4, 0xA8, 4, 0x73C, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	IOMUX_PAD(0x3D4, 0xA8, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23	IOMUX_PAD(0x3D4, 0xA8, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2	IOMUX_PAD(0x3D4, 0xA8, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__GPIO5_13		IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__ECSPI2_SCLK		IOMUX_PAD(0x3D8, 0xAC, 2, 0x7B8, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	IOMUX_PAD(0x3D8, 0xAC, 3, 0x748, 1, 0)
+#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC	IOMUX_PAD(0x3D8, 0xAC, 4, 0x738, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	IOMUX_PAD(0x3D8, 0xAC, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24	IOMUX_PAD(0x3D8, 0xAC, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3	IOMUX_PAD(0x3D8, 0xAC, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__GPIO5_14		IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__ECSPI1_SCLK		IOMUX_PAD(0x3DC, 0xB0, 2, 0x79C, 1, 0)
+#define _MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC	IOMUX_PAD(0x3DC, 0xB0, 3, 0x740, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	IOMUX_PAD(0x3DC, 0xB0, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25	IOMUX_PAD(0x3DC, 0xB0, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT20__SATA_PHY_TDI		IOMUX_PAD(0x3DC, 0xB0, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__GPIO5_15		IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__ECSPI1_MOSI		IOMUX_PAD(0x3E0, 0xB4, 2, 0x7A4, 1, 0)
+#define _MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD	IOMUX_PAD(0x3E0, 0xB4, 3, 0x734, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0	IOMUX_PAD(0x3E0, 0xB4, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26	IOMUX_PAD(0x3E0, 0xB4, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT21__SATA_PHY_TDO	IOMUX_PAD(0x3E0, 0xB4, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__GPIO5_16		IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__ECSPI1_MISO		IOMUX_PAD(0x3E4, 0xB8, 2, 0x7A0, 1, 0)
+#define _MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS	IOMUX_PAD(0x3E4, 0xB8, 3, 0x744, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1	IOMUX_PAD(0x3E4, 0xB8, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27	IOMUX_PAD(0x3E4, 0xB8, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT22__SATA_PHY_TCK	IOMUX_PAD(0x3E4, 0xB8, 7, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__GPIO5_17		IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__ECSPI1_SS0		IOMUX_PAD(0x3E8, 0xBC, 2, 0x7A8, 1, 0)
+#define _MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD	IOMUX_PAD(0x3E8, 0xBC, 3, 0x730, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2	IOMUX_PAD(0x3E8, 0xBC, 5, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28	IOMUX_PAD(0x3E8, 0xBC, 6, 0x0, 0, 0)
+#define _MX53_PAD_DISP0_DAT23__SATA_PHY_TMS	IOMUX_PAD(0x3E8, 0xBC, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK	IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_PIXCLK__GPIO5_18		IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0	IOMUX_PAD(0x3EC, 0xC0, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29	IOMUX_PAD(0x3EC, 0xC0, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC		IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__GPIO5_19		IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK		IOMUX_PAD(0x3F0, 0xC4, 2, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1	IOMUX_PAD(0x3F0, 0xC4, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30	IOMUX_PAD(0x3F0, 0xC4, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_MCLK__TPIU_TRCTL		IOMUX_PAD(0x3F0, 0xC4, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN	IOMUX_PAD(0x3F4, 0xC8, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DATA_EN__GPIO5_20		IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2	IOMUX_PAD(0x3F4, 0xC8, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31	IOMUX_PAD(0x3F4, 0xC8, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK		IOMUX_PAD(0x3F4, 0xC8, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC	IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_VSYNC__GPIO5_21		IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3	IOMUX_PAD(0x3F8, 0xCC, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32	IOMUX_PAD(0x3F8, 0xCC, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0		IOMUX_PAD(0x3F8, 0xCC, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4		IOMUX_PAD(0x3FC, 0xD0, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__GPIO5_22		IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__KPP_COL_5		IOMUX_PAD(0x3FC, 0xD0, 2, 0x840, 1, 0)
+#define _MX53_PAD_CSI0_DAT4__ECSPI1_SCLK		IOMUX_PAD(0x3FC, 0xD0, 3, 0x79C, 2, 0)
+#define _MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	IOMUX_PAD(0x3FC, 0xD0, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	IOMUX_PAD(0x3FC, 0xD0, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33	IOMUX_PAD(0x3FC, 0xD0, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT4__TPIU_TRACE_1		IOMUX_PAD(0x3FC, 0xD0, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5		IOMUX_PAD(0x400, 0xD4, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__GPIO5_23		IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__KPP_ROW_5		IOMUX_PAD(0x400, 0xD4, 2, 0x84C, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__ECSPI1_MOSI		IOMUX_PAD(0x400, 0xD4, 3, 0x7A4, 2, 0)
+#define _MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	IOMUX_PAD(0x400, 0xD4, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	IOMUX_PAD(0x400, 0xD4, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34	IOMUX_PAD(0x400, 0xD4, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT5__TPIU_TRACE_2		IOMUX_PAD(0x400, 0xD4, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6		IOMUX_PAD(0x404, 0xD8, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__GPIO5_24		IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__KPP_COL_6		IOMUX_PAD(0x404, 0xD8, 2, 0x844, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__ECSPI1_MISO		IOMUX_PAD(0x404, 0xD8, 3, 0x7A0, 2, 0)
+#define _MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	IOMUX_PAD(0x404, 0xD8, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	IOMUX_PAD(0x404, 0xD8, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35	IOMUX_PAD(0x404, 0xD8, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT6__TPIU_TRACE_3		IOMUX_PAD(0x404, 0xD8, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7		IOMUX_PAD(0x408, 0xDC, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__GPIO5_25		IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__KPP_ROW_6		IOMUX_PAD(0x408, 0xDC, 2, 0x850, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__ECSPI1_SS0		IOMUX_PAD(0x408, 0xDC, 3, 0x7A8, 2, 0)
+#define _MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	IOMUX_PAD(0x408, 0xDC, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	IOMUX_PAD(0x408, 0xDC, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36	IOMUX_PAD(0x408, 0xDC, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT7__TPIU_TRACE_4		IOMUX_PAD(0x408, 0xDC, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8		IOMUX_PAD(0x40C, 0xE0, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__GPIO5_26		IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__KPP_COL_7		IOMUX_PAD(0x40C, 0xE0, 2, 0x848, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__ECSPI2_SCLK		IOMUX_PAD(0x40C, 0xE0, 3, 0x7B8, 1, 0)
+#define _MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	IOMUX_PAD(0x40C, 0xE0, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__I2C1_SDA		IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37	IOMUX_PAD(0x40C, 0xE0, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT8__TPIU_TRACE_5		IOMUX_PAD(0x40C, 0xE0, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9		IOMUX_PAD(0x410, 0xE4, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__GPIO5_27		IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__KPP_ROW_7		IOMUX_PAD(0x410, 0xE4, 2, 0x854, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		IOMUX_PAD(0x410, 0xE4, 3, 0x7C0, 1, 0)
+#define _MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR	IOMUX_PAD(0x410, 0xE4, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__I2C1_SCL		IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38	IOMUX_PAD(0x410, 0xE4, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__GPIO5_28		IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO		IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0)
+#define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC	IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4	IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39	IOMUX_PAD(0x414, 0xE8, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__TPIU_TRACE_7		IOMUX_PAD(0x414, 0xE8, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11		IOMUX_PAD(0x418, 0xEC, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__GPIO5_29		IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, 0)
+#define _MX53_PAD_CSI0_DAT11__ECSPI2_SS0		IOMUX_PAD(0x418, 0xEC, 3, 0x7C4, 1, 0)
+#define _MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS	IOMUX_PAD(0x418, 0xEC, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5	IOMUX_PAD(0x418, 0xEC, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40	IOMUX_PAD(0x418, 0xEC, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__GPIO5_30		IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX	IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0)
+#define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0	IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6	IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41	IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		IOMUX_PAD(0x41C, 0xF0, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__GPIO5_31		IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__UART4_RXD_MUX	IOMUX_PAD(0x420, 0xF4, 2, 0x890, 3, 0)
+#define _MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1	IOMUX_PAD(0x420, 0xF4, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7	IOMUX_PAD(0x420, 0xF4, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42	IOMUX_PAD(0x420, 0xF4, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__GPIO6_0		IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX	IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0)
+#define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2	IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8	IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43	IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		IOMUX_PAD(0x424, 0xF8, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__GPIO6_1		IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__UART5_RXD_MUX	IOMUX_PAD(0x428, 0xFC, 2, 0x898, 3, 0)
+#define _MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3	IOMUX_PAD(0x428, 0xFC, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9	IOMUX_PAD(0x428, 0xFC, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44	IOMUX_PAD(0x428, 0xFC, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		IOMUX_PAD(0x428, 0xFC, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__GPIO6_2		IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__UART4_RTS		IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4	IOMUX_PAD(0x42C, 0x100, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10	IOMUX_PAD(0x42C, 0x100, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45	IOMUX_PAD(0x42C, 0x100, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__GPIO6_3		IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__UART4_CTS		IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0)
+#define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5	IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11	IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46	IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		IOMUX_PAD(0x430, 0x104, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__GPIO6_4		IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__UART5_RTS		IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, 0)
+#define _MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6	IOMUX_PAD(0x434, 0x108, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12	IOMUX_PAD(0x434, 0x108, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47	IOMUX_PAD(0x434, 0x108, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__GPIO6_5		IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__UART5_CTS		IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0)
+#define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7	IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13	IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48	IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0)
+#define _MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK	IOMUX_PAD(0x438, 0x10C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__EMI_WEIM_A_25		IOMUX_PAD(0x458, 0x110, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__GPIO5_2			IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__ECSPI2_RDY		IOMUX_PAD(0x458, 0x110, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__IPU_DI1_PIN12		IOMUX_PAD(0x458, 0x110, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__CSPI_SS1			IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, 0)
+#define _MX53_PAD_EIM_A25__IPU_DI0_D1_CS		IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A25__USBPHY1_BISTOK		IOMUX_PAD(0x458, 0x110, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB2__EMI_WEIM_EB_2		IOMUX_PAD(0x45C, 0x114, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB2__GPIO2_30			IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK		IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, 0)
+#define _MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS		IOMUX_PAD(0x45C, 0x114, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB2__ECSPI1_SS0		IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, 0)
+#define _MX53_PAD_EIM_EB2__I2C2_SCL			IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, 0)
+#define _MX53_PAD_EIM_D16__EMI_WEIM_D_16		IOMUX_PAD(0x460, 0x118, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D16__GPIO3_16			IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D16__IPU_DI0_PIN5		IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK	IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D16__ECSPI1_SCLK		IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0)
+#define _MX53_PAD_EIM_D16__I2C2_SDA			IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0)
+#define _MX53_PAD_EIM_D17__EMI_WEIM_D_17		IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D17__GPIO3_17			IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D17__IPU_DI0_PIN6		IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN	IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0)
+#define _MX53_PAD_EIM_D17__ECSPI1_MISO		IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0)
+#define _MX53_PAD_EIM_D17__I2C3_SCL			IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0)
+#define _MX53_PAD_EIM_D18__EMI_WEIM_D_18		IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D18__GPIO3_18			IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D18__IPU_DI0_PIN7		IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO	IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0)
+#define _MX53_PAD_EIM_D18__ECSPI1_MOSI		IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0)
+#define _MX53_PAD_EIM_D18__I2C3_SDA			IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0)
+#define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS		IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__EMI_WEIM_D_19		IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__GPIO3_19			IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__IPU_DI0_PIN8		IOMUX_PAD(0x46C, 0x124, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS	IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__ECSPI1_SS1		IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0)
+#define _MX53_PAD_EIM_D19__EPIT1_EPITO		IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D19__UART1_CTS			IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0)
+#define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC		IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0)
+#define _MX53_PAD_EIM_D20__EMI_WEIM_D_20		IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D20__GPIO3_20			IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D20__IPU_DI0_PIN16		IOMUX_PAD(0x470, 0x128, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D20__CSPI_SS0			IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, 0)
+#define _MX53_PAD_EIM_D20__EPIT2_EPITO		IOMUX_PAD(0x470, 0x128, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D20__UART1_RTS			IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, 0)
+#define _MX53_PAD_EIM_D20__USBOH3_USBH2_PWR	IOMUX_PAD(0x470, 0x128, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D21__EMI_WEIM_D_21		IOMUX_PAD(0x474, 0x12C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D21__GPIO3_21			IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D21__IPU_DI0_PIN17		IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK	IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D21__CSPI_SCLK			IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0)
+#define _MX53_PAD_EIM_D21__I2C1_SCL			IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0)
+#define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC	IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0)
+#define _MX53_PAD_EIM_D22__EMI_WEIM_D_22		IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D22__GPIO3_22			IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D22__IPU_DI0_PIN1		IOMUX_PAD(0x478, 0x130, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN	IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, 0)
+#define _MX53_PAD_EIM_D22__CSPI_MISO			IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, 0)
+#define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR	IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__EMI_WEIM_D_23		IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__GPIO3_23			IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__UART3_CTS			IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0)
+#define _MX53_PAD_EIM_D23__UART1_DCD		IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS		IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__IPU_DI1_PIN2		IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN		IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, 0)
+#define _MX53_PAD_EIM_D23__IPU_DI1_PIN14		IOMUX_PAD(0x47C, 0x134, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB3__EMI_WEIM_EB_3		IOMUX_PAD(0x480, 0x138, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB3__GPIO2_31			IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB3__UART3_RTS			IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, 0)
+#define _MX53_PAD_EIM_EB3__UART1_RI			IOMUX_PAD(0x480, 0x138, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN3		IOMUX_PAD(0x480, 0x138, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, 0)
+#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16		IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D24__EMI_WEIM_D_24		IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D24__GPIO3_24			IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D24__UART3_TXD_MUX		IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0)
+#define _MX53_PAD_EIM_D24__ECSPI1_SS2		IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0)
+#define _MX53_PAD_EIM_D24__CSPI_SS2			IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0)
+#define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS	IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0)
+#define _MX53_PAD_EIM_D24__ECSPI2_SS2		IOMUX_PAD(0x484, 0x13C, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D24__UART1_DTR		IOMUX_PAD(0x484, 0x13C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D25__EMI_WEIM_D_25		IOMUX_PAD(0x488, 0x140, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D25__GPIO3_25			IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D25__UART3_RXD_MUX		IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, 0)
+#define _MX53_PAD_EIM_D25__ECSPI1_SS3		IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, 0)
+#define _MX53_PAD_EIM_D25__CSPI_SS3			IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, 0)
+#define _MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, 0)
+#define _MX53_PAD_EIM_D25__ECSPI2_SS3		IOMUX_PAD(0x488, 0x140, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D25__UART1_DSR		IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__EMI_WEIM_D_26		IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__GPIO3_26			IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__UART2_TXD_MUX		IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0)
+#define _MX53_PAD_EIM_D26__FIRI_RXD			IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0)
+#define _MX53_PAD_EIM_D26__IPU_CSI0_D_1		IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__IPU_DI1_PIN11		IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__IPU_SISG_2		IOMUX_PAD(0x48C, 0x144, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		IOMUX_PAD(0x48C, 0x144, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__EMI_WEIM_D_27		IOMUX_PAD(0x490, 0x148, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__GPIO3_27			IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__UART2_RXD_MUX		IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, 0)
+#define _MX53_PAD_EIM_D27__FIRI_TXD			IOMUX_PAD(0x490, 0x148, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__IPU_CSI0_D_0		IOMUX_PAD(0x490, 0x148, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__IPU_DI1_PIN13		IOMUX_PAD(0x490, 0x148, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__IPU_SISG_3		IOMUX_PAD(0x490, 0x148, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D28__EMI_WEIM_D_28		IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D28__GPIO3_28			IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0)
+#define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO	IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0)
+#define _MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0)
+#define _MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0)
+#define _MX53_PAD_EIM_D28__IPU_EXT_TRIG		IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D28__IPU_DI0_PIN13		IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D29__EMI_WEIM_D_29		IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D29__GPIO3_29			IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D29__UART2_RTS			IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, 0)
+#define _MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS	IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D29__CSPI_SS0			IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, 0)
+#define _MX53_PAD_EIM_D29__IPU_DI1_PIN15		IOMUX_PAD(0x498, 0x150, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D29__IPU_CSI1_VSYNC		IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, 0)
+#define _MX53_PAD_EIM_D29__IPU_DI0_PIN14		IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__EMI_WEIM_D_30		IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__GPIO3_30			IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__UART3_CTS			IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0)
+#define _MX53_PAD_EIM_D30__IPU_CSI0_D_3		IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__IPU_DI0_PIN11		IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D30__USBOH3_USBH1_OC		IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, 0)
+#define _MX53_PAD_EIM_D30__USBOH3_USBH2_OC		IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, 0)
+#define _MX53_PAD_EIM_D31__EMI_WEIM_D_31		IOMUX_PAD(0x4A0, 0x158, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__GPIO3_31			IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__UART3_RTS			IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, 0)
+#define _MX53_PAD_EIM_D31__IPU_CSI0_D_2		IOMUX_PAD(0x4A0, 0x158, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__IPU_DI0_PIN12		IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		IOMUX_PAD(0x4A0, 0x158, 5, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__USBOH3_USBH1_PWR	IOMUX_PAD(0x4A0, 0x158, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_D31__USBOH3_USBH2_PWR	IOMUX_PAD(0x4A0, 0x158, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__EMI_WEIM_A_24		IOMUX_PAD(0x4A8, 0x15C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__GPIO5_4			IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__IPU_DISP1_DAT_19		IOMUX_PAD(0x4A8, 0x15C, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__IPU_CSI1_D_19		IOMUX_PAD(0x4A8, 0x15C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__IPU_SISG_2		IOMUX_PAD(0x4A8, 0x15C, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A24__USBPHY2_BVALID		IOMUX_PAD(0x4A8, 0x15C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__EMI_WEIM_A_23		IOMUX_PAD(0x4AC, 0x160, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__GPIO6_6			IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__IPU_DISP1_DAT_18		IOMUX_PAD(0x4AC, 0x160, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__IPU_CSI1_D_18		IOMUX_PAD(0x4AC, 0x160, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__IPU_SISG_3		IOMUX_PAD(0x4AC, 0x160, 6, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A23__USBPHY2_ENDSESSION	IOMUX_PAD(0x4AC, 0x160, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A22__EMI_WEIM_A_22		IOMUX_PAD(0x4B0, 0x164, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A22__GPIO2_16			IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A22__IPU_DISP1_DAT_17		IOMUX_PAD(0x4B0, 0x164, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A22__IPU_CSI1_D_17		IOMUX_PAD(0x4B0, 0x164, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A22__SRC_BT_CFG1_7		IOMUX_PAD(0x4B0, 0x164, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A21__EMI_WEIM_A_21		IOMUX_PAD(0x4B4, 0x168, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A21__GPIO2_17			IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A21__IPU_DISP1_DAT_16		IOMUX_PAD(0x4B4, 0x168, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A21__IPU_CSI1_D_16		IOMUX_PAD(0x4B4, 0x168, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A21__SRC_BT_CFG1_6		IOMUX_PAD(0x4B4, 0x168, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A20__EMI_WEIM_A_20		IOMUX_PAD(0x4B8, 0x16C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A20__GPIO2_18			IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A20__IPU_DISP1_DAT_15		IOMUX_PAD(0x4B8, 0x16C, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A20__IPU_CSI1_D_15		IOMUX_PAD(0x4B8, 0x16C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A20__SRC_BT_CFG1_5		IOMUX_PAD(0x4B8, 0x16C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A19__EMI_WEIM_A_19		IOMUX_PAD(0x4BC, 0x170, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A19__GPIO2_19			IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A19__IPU_DISP1_DAT_14		IOMUX_PAD(0x4BC, 0x170, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A19__IPU_CSI1_D_14		IOMUX_PAD(0x4BC, 0x170, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A19__SRC_BT_CFG1_4		IOMUX_PAD(0x4BC, 0x170, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A18__EMI_WEIM_A_18		IOMUX_PAD(0x4C0, 0x174, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A18__GPIO2_20			IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A18__IPU_DISP1_DAT_13		IOMUX_PAD(0x4C0, 0x174, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A18__IPU_CSI1_D_13		IOMUX_PAD(0x4C0, 0x174, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A18__SRC_BT_CFG1_3		IOMUX_PAD(0x4C0, 0x174, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A17__EMI_WEIM_A_17		IOMUX_PAD(0x4C4, 0x178, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A17__GPIO2_21			IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A17__IPU_DISP1_DAT_12		IOMUX_PAD(0x4C4, 0x178, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A17__IPU_CSI1_D_12		IOMUX_PAD(0x4C4, 0x178, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A17__SRC_BT_CFG1_2		IOMUX_PAD(0x4C4, 0x178, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A16__EMI_WEIM_A_16		IOMUX_PAD(0x4C8, 0x17C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A16__GPIO2_22			IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK		IOMUX_PAD(0x4C8, 0x17C, 2, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK		IOMUX_PAD(0x4C8, 0x17C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_A16__SRC_BT_CFG1_1		IOMUX_PAD(0x4C8, 0x17C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS0__EMI_WEIM_CS_0		IOMUX_PAD(0x4CC, 0x180, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS0__GPIO2_23			IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS0__ECSPI2_SCLK		IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, 0)
+#define _MX53_PAD_EIM_CS0__IPU_DI1_PIN5		IOMUX_PAD(0x4CC, 0x180, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS1__EMI_WEIM_CS_1		IOMUX_PAD(0x4D0, 0x184, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS1__GPIO2_24			IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_CS1__ECSPI2_MOSI		IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, 0)
+#define _MX53_PAD_EIM_CS1__IPU_DI1_PIN6		IOMUX_PAD(0x4D0, 0x184, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_OE__EMI_WEIM_OE		IOMUX_PAD(0x4D4, 0x188, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_OE__GPIO2_25			IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_OE__ECSPI2_MISO		IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, 0)
+#define _MX53_PAD_EIM_OE__IPU_DI1_PIN7		IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_OE__USBPHY2_IDDIG		IOMUX_PAD(0x4D4, 0x188, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_RW__EMI_WEIM_RW		IOMUX_PAD(0x4D8, 0x18C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_RW__GPIO2_26			IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_RW__ECSPI2_SS0			IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, 0)
+#define _MX53_PAD_EIM_RW__IPU_DI1_PIN8		IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT	IOMUX_PAD(0x4D8, 0x18C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_LBA__EMI_WEIM_LBA		IOMUX_PAD(0x4DC, 0x190, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_LBA__GPIO2_27			IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_LBA__ECSPI2_SS1		IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, 0)
+#define _MX53_PAD_EIM_LBA__IPU_DI1_PIN17		IOMUX_PAD(0x4DC, 0x190, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_LBA__SRC_BT_CFG1_0		IOMUX_PAD(0x4DC, 0x190, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB0__EMI_WEIM_EB_0		IOMUX_PAD(0x4E4, 0x194, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB0__GPIO2_28			IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11		IOMUX_PAD(0x4E4, 0x194, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB0__IPU_CSI1_D_11		IOMUX_PAD(0x4E4, 0x194, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB0__GPC_PMIC_RDY		IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, 0)
+#define _MX53_PAD_EIM_EB0__SRC_BT_CFG2_7		IOMUX_PAD(0x4E4, 0x194, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB1__EMI_WEIM_EB_1		IOMUX_PAD(0x4E8, 0x198, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB1__GPIO2_29			IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10		IOMUX_PAD(0x4E8, 0x198, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB1__IPU_CSI1_D_10		IOMUX_PAD(0x4E8, 0x198, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_EB1__SRC_BT_CFG2_6		IOMUX_PAD(0x4E8, 0x198, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA0__GPIO3_0			IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9		IOMUX_PAD(0x4EC, 0x19C, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA0__IPU_CSI1_D_9		IOMUX_PAD(0x4EC, 0x19C, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA0__SRC_BT_CFG2_5		IOMUX_PAD(0x4EC, 0x19C, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA1__GPIO3_1			IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8		IOMUX_PAD(0x4F0, 0x1A0, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA1__IPU_CSI1_D_8		IOMUX_PAD(0x4F0, 0x1A0, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA1__SRC_BT_CFG2_4		IOMUX_PAD(0x4F0, 0x1A0, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA2__GPIO3_2			IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7		IOMUX_PAD(0x4F4, 0x1A4, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA2__IPU_CSI1_D_7		IOMUX_PAD(0x4F4, 0x1A4, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA2__SRC_BT_CFG2_3		IOMUX_PAD(0x4F4, 0x1A4, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA3__GPIO3_3			IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6		IOMUX_PAD(0x4F8, 0x1A8, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA3__IPU_CSI1_D_6		IOMUX_PAD(0x4F8, 0x1A8, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA3__SRC_BT_CFG2_2		IOMUX_PAD(0x4F8, 0x1A8, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA4__GPIO3_4			IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5		IOMUX_PAD(0x4FC, 0x1AC, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA4__IPU_CSI1_D_5		IOMUX_PAD(0x4FC, 0x1AC, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA4__SRC_BT_CFG3_7		IOMUX_PAD(0x4FC, 0x1AC, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__GPIO3_5			IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4		IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6		IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA6__GPIO3_6			IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA6__IPU_CSI1_D_3		IOMUX_PAD(0x504, 0x1B4, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA6__SRC_BT_CFG3_5		IOMUX_PAD(0x504, 0x1B4, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA7__GPIO3_7			IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2		IOMUX_PAD(0x508, 0x1B8, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA7__IPU_CSI1_D_2		IOMUX_PAD(0x508, 0x1B8, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA7__SRC_BT_CFG3_4		IOMUX_PAD(0x508, 0x1B8, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8	IOMUX_PAD(0x50C, 0x1BC, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA8__GPIO3_8			IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1		IOMUX_PAD(0x50C, 0x1BC, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA8__IPU_CSI1_D_1		IOMUX_PAD(0x50C, 0x1BC, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA8__SRC_BT_CFG3_3		IOMUX_PAD(0x50C, 0x1BC, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9	IOMUX_PAD(0x510, 0x1C0, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA9__GPIO3_9			IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0		IOMUX_PAD(0x510, 0x1C0, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA9__IPU_CSI1_D_0		IOMUX_PAD(0x510, 0x1C0, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA9__SRC_BT_CFG3_2		IOMUX_PAD(0x510, 0x1C0, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10	IOMUX_PAD(0x514, 0x1C4, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA10__GPIO3_10			IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA10__IPU_DI1_PIN15		IOMUX_PAD(0x514, 0x1C4, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN	IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, 0)
+#define _MX53_PAD_EIM_DA10__SRC_BT_CFG3_1		IOMUX_PAD(0x514, 0x1C4, 7, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11	IOMUX_PAD(0x518, 0x1C8, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA11__GPIO3_11			IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA11__IPU_DI1_PIN2		IOMUX_PAD(0x518, 0x1C8, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC		IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, 0)
+#define _MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12	IOMUX_PAD(0x51C, 0x1CC, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA12__GPIO3_12			IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA12__IPU_DI1_PIN3		IOMUX_PAD(0x51C, 0x1CC, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC		IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, 0)
+#define _MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13	IOMUX_PAD(0x520, 0x1D0, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA13__GPIO3_13			IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA13__IPU_DI1_D0_CS		IOMUX_PAD(0x520, 0x1D0, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK		IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, 0)
+#define _MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14	IOMUX_PAD(0x524, 0x1D4, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA14__GPIO3_14			IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA14__IPU_DI1_D1_CS		IOMUX_PAD(0x524, 0x1D4, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK		IOMUX_PAD(0x524, 0x1D4, 4, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15	IOMUX_PAD(0x528, 0x1D8, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA15__GPIO3_15			IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN1		IOMUX_PAD(0x528, 0x1D8, 3, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN4		IOMUX_PAD(0x528, 0x1D8, 4, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_WE_B__GPIO6_12		IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_RE_B__GPIO6_13		IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT		IOMUX_PAD(0x534, 0x1E4, 0, 0x0, 0, 0)
+#define _MX53_PAD_EIM_WAIT__GPIO5_0			IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, 0)
+#define _MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B	IOMUX_PAD(0x534, 0x1E4, 2, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX3_P__GPIO6_22		IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3	IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX2_P__GPIO6_24		IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2	IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_CLK_P__GPIO6_26		IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK	IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX1_P__GPIO6_28		IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1	IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX0_P__GPIO6_30		IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0	IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX3_P__GPIO7_22		IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_CLK_P__GPIO7_24		IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX2_P__GPIO7_26		IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX1_P__GPIO7_28		IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX0_P__GPIO7_30		IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, 0)
+#define _MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_10__GPIO4_0			IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_10__OSC32k_32K_OUT		IOMUX_PAD(0x540, 0x214, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_11__GPIO4_1			IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_12__GPIO4_2			IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_13__GPIO4_3			IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_14__GPIO4_4			IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CLE__EMI_NANDF_CLE		IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CLE__GPIO6_7			IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0	IOMUX_PAD(0x5A0, 0x228, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_ALE__EMI_NANDF_ALE		IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_ALE__GPIO6_8		IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1	IOMUX_PAD(0x5A4, 0x22C, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_WP_B__GPIO6_9		IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2	IOMUX_PAD(0x5A8, 0x230, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_RB0__GPIO6_10		IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3	IOMUX_PAD(0x5AC, 0x234, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS0__GPIO6_11		IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4	IOMUX_PAD(0x5B0, 0x238, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS1__GPIO6_14		IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS1__MLB_MLBCLK		IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, 0)
+#define _MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5	IOMUX_PAD(0x5B4, 0x23C, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__GPIO6_15		IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__IPU_SISG_0		IOMUX_PAD(0x5B8, 0x240, 2, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__ESAI1_TX0		IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, 0)
+#define _MX53_PAD_NANDF_CS2__EMI_WEIM_CRE		IOMUX_PAD(0x5B8, 0x240, 4, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK		IOMUX_PAD(0x5B8, 0x240, 5, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS2__MLB_MLBSIG		IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, 0)
+#define _MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6	IOMUX_PAD(0x5B8, 0x240, 7, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS3__GPIO6_16		IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS3__IPU_SISG_1		IOMUX_PAD(0x5BC, 0x244, 2, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS3__ESAI1_TX1		IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, 0)
+#define _MX53_PAD_NANDF_CS3__EMI_WEIM_A_26		IOMUX_PAD(0x5BC, 0x244, 4, 0x0, 0, 0)
+#define _MX53_PAD_NANDF_CS3__MLB_MLBDAT		IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, 0)
+#define _MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7	IOMUX_PAD(0x5BC, 0x244, 7, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDIO__FEC_MDIO		IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, 0)
+#define _MX53_PAD_FEC_MDIO__GPIO1_22			IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDIO__ESAI1_SCKR		IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, 0)
+#define _MX53_PAD_FEC_MDIO__FEC_COL			IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, 0)
+#define _MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2		IOMUX_PAD(0x5C4, 0x248, 4, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3	IOMUX_PAD(0x5C4, 0x248, 5, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49	IOMUX_PAD(0x5C4, 0x248, 6, 0x0, 0, 0)
+#define _MX53_PAD_FEC_REF_CLK__FEC_TX_CLK		IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_REF_CLK__GPIO1_23		IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_REF_CLK__ESAI1_FSR		IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, 0)
+#define _MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4	IOMUX_PAD(0x5C8, 0x24C, 5, 0x0, 0, 0)
+#define _MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50	IOMUX_PAD(0x5C8, 0x24C, 6, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RX_ER__FEC_RX_ER		IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RX_ER__GPIO1_24		IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RX_ER__ESAI1_HCKR		IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, 0)
+#define _MX53_PAD_FEC_RX_ER__FEC_RX_CLK		IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, 0)
+#define _MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3		IOMUX_PAD(0x5CC, 0x250, 4, 0x0, 0, 0)
+#define _MX53_PAD_FEC_CRS_DV__FEC_RX_DV		IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_CRS_DV__GPIO1_25		IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_CRS_DV__ESAI1_SCKT		IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, 0)
+#define _MX53_PAD_FEC_RXD1__FEC_RDATA_1		IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RXD1__GPIO1_26			IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RXD1__ESAI1_FST		IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, 0)
+#define _MX53_PAD_FEC_RXD1__MLB_MLBSIG		IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, 0)
+#define _MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1		IOMUX_PAD(0x5D4, 0x258, 4, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RXD0__FEC_RDATA_0		IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RXD0__GPIO1_27			IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_RXD0__ESAI1_HCKT		IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, 0)
+#define _MX53_PAD_FEC_RXD0__OSC32k_32K_OUT		IOMUX_PAD(0x5D8, 0x25C, 3, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TX_EN__FEC_TX_EN		IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TX_EN__GPIO1_28		IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2		IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, 0)
+#define _MX53_PAD_FEC_TXD1__FEC_TDATA_1		IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TXD1__GPIO1_29			IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3		IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, 0)
+#define _MX53_PAD_FEC_TXD1__MLB_MLBCLK		IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, 0)
+#define _MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK	IOMUX_PAD(0x5E0, 0x264, 4, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TXD0__FEC_TDATA_0		IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TXD0__GPIO1_30			IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1		IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, 0)
+#define _MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0	IOMUX_PAD(0x5E4, 0x268, 7, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDC__FEC_MDC			IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDC__GPIO1_31			IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDC__ESAI1_TX5_RX0		IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, 0)
+#define _MX53_PAD_FEC_MDC__MLB_MLBDAT		IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, 0)
+#define _MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG	IOMUX_PAD(0x5E8, 0x26C, 4, 0x0, 0, 0)
+#define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1	IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOW__PATA_DIOW		IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOW__GPIO6_17		IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX	IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0)
+#define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2	IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMACK__PATA_DMACK		IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMACK__GPIO6_18		IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMACK__UART1_RXD_MUX	IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, 0)
+#define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3	IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMARQ__PATA_DMARQ		IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMARQ__GPIO7_0		IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0)
+#define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0	IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4	IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN	IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_BUFFER_EN__GPIO7_1		IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, 0)
+#define _MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1	IOMUX_PAD(0x5FC, 0x27C, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5	IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_INTRQ__PATA_INTRQ		IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_INTRQ__GPIO7_2		IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_INTRQ__UART2_CTS		IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0)
+#define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN		IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2	IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6	IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOR__PATA_DIOR		IOMUX_PAD(0x604, 0x284, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOR__GPIO7_3			IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DIOR__UART2_RTS		IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, 0)
+#define _MX53_PAD_PATA_DIOR__CAN1_RXCAN		IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, 0)
+#define _MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7	IOMUX_PAD(0x604, 0x284, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B	IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_RESET_B__GPIO7_4		IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD		IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_RESET_B__UART1_CTS		IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0)
+#define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN		IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0	IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_IORDY__PATA_IORDY		IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_IORDY__GPIO7_5		IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_IORDY__ESDHC3_CLK		IOMUX_PAD(0x60C, 0x28C, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_IORDY__UART1_RTS		IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, 0)
+#define _MX53_PAD_PATA_IORDY__CAN2_RXCAN		IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, 0)
+#define _MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1	IOMUX_PAD(0x60C, 0x28C, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_0__PATA_DA_0		IOMUX_PAD(0x610, 0x290, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_0__GPIO7_6		IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_0__ESDHC3_RST		IOMUX_PAD(0x610, 0x290, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_0__OWIRE_LINE		IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, 0)
+#define _MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2	IOMUX_PAD(0x610, 0x290, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_1__PATA_DA_1		IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_1__GPIO7_7		IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_1__ESDHC4_CMD		IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_1__UART3_CTS		IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0)
+#define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3	IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_2__PATA_DA_2		IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_2__GPIO7_8		IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_2__ESDHC4_CLK		IOMUX_PAD(0x618, 0x298, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DA_2__UART3_RTS		IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, 0)
+#define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4	IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_0__PATA_CS_0		IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_0__GPIO7_9			IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX		IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0)
+#define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5	IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_1__PATA_CS_1		IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_1__GPIO7_10		IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_CS_1__UART3_RXD_MUX		IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, 0)
+#define _MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6	IOMUX_PAD(0x620, 0x2A0, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__PATA_DATA_0		IOMUX_PAD(0x628, 0x2A4, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__GPIO2_0		IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	IOMUX_PAD(0x628, 0x2A4, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__ESDHC3_DAT4		IOMUX_PAD(0x628, 0x2A4, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0	IOMUX_PAD(0x628, 0x2A4, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0	IOMUX_PAD(0x628, 0x2A4, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7	IOMUX_PAD(0x628, 0x2A4, 7, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__PATA_DATA_1		IOMUX_PAD(0x62C, 0x2A8, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__GPIO2_1		IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	IOMUX_PAD(0x62C, 0x2A8, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__ESDHC3_DAT5		IOMUX_PAD(0x62C, 0x2A8, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1	IOMUX_PAD(0x62C, 0x2A8, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1	IOMUX_PAD(0x62C, 0x2A8, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__PATA_DATA_2		IOMUX_PAD(0x630, 0x2AC, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__GPIO2_2		IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	IOMUX_PAD(0x630, 0x2AC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__ESDHC3_DAT6		IOMUX_PAD(0x630, 0x2AC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2	IOMUX_PAD(0x630, 0x2AC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2	IOMUX_PAD(0x630, 0x2AC, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__PATA_DATA_3		IOMUX_PAD(0x634, 0x2B0, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__GPIO2_3		IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	IOMUX_PAD(0x634, 0x2B0, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__ESDHC3_DAT7		IOMUX_PAD(0x634, 0x2B0, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3	IOMUX_PAD(0x634, 0x2B0, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3	IOMUX_PAD(0x634, 0x2B0, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__PATA_DATA_4		IOMUX_PAD(0x638, 0x2B4, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__GPIO2_4		IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	IOMUX_PAD(0x638, 0x2B4, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__ESDHC4_DAT4		IOMUX_PAD(0x638, 0x2B4, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4	IOMUX_PAD(0x638, 0x2B4, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4	IOMUX_PAD(0x638, 0x2B4, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__PATA_DATA_5	IOMUX_PAD(0x63C, 0x2B8, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__GPIO2_5		IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	IOMUX_PAD(0x63C, 0x2B8, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5		IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5	IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5	IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__PATA_DATA_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__GPIO2_6		IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6		IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__PATA_DATA_7		IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__GPIO2_7		IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__ESDHC4_DAT7		IOMUX_PAD(0x644, 0x2C0, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7	IOMUX_PAD(0x644, 0x2C0, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7	IOMUX_PAD(0x644, 0x2C0, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__PATA_DATA_8		IOMUX_PAD(0x648, 0x2C4, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__GPIO2_8		IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__ESDHC1_DAT4		IOMUX_PAD(0x648, 0x2C4, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__EMI_NANDF_D_8	IOMUX_PAD(0x648, 0x2C4, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__ESDHC3_DAT0		IOMUX_PAD(0x648, 0x2C4, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8	IOMUX_PAD(0x648, 0x2C4, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8	IOMUX_PAD(0x648, 0x2C4, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__PATA_DATA_9		IOMUX_PAD(0x64C, 0x2C8, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__GPIO2_9		IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__ESDHC1_DAT5		IOMUX_PAD(0x64C, 0x2C8, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__EMI_NANDF_D_9	IOMUX_PAD(0x64C, 0x2C8, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__ESDHC3_DAT1		IOMUX_PAD(0x64C, 0x2C8, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9	IOMUX_PAD(0x64C, 0x2C8, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9	IOMUX_PAD(0x64C, 0x2C8, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__PATA_DATA_10	IOMUX_PAD(0x650, 0x2CC, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__GPIO2_10		IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__ESDHC1_DAT6		IOMUX_PAD(0x650, 0x2CC, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__EMI_NANDF_D_10	IOMUX_PAD(0x650, 0x2CC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__ESDHC3_DAT2		IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10	IOMUX_PAD(0x650, 0x2CC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10	IOMUX_PAD(0x650, 0x2CC, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__PATA_DATA_11	IOMUX_PAD(0x654, 0x2D0, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__GPIO2_11		IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__ESDHC1_DAT7		IOMUX_PAD(0x654, 0x2D0, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__EMI_NANDF_D_11	IOMUX_PAD(0x654, 0x2D0, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__ESDHC3_DAT3		IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11	IOMUX_PAD(0x654, 0x2D0, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11	IOMUX_PAD(0x654, 0x2D0, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__PATA_DATA_12	IOMUX_PAD(0x658, 0x2D4, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__GPIO2_12		IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__ESDHC2_DAT4		IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__EMI_NANDF_D_12	IOMUX_PAD(0x658, 0x2D4, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__ESDHC4_DAT0		IOMUX_PAD(0x658, 0x2D4, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12	IOMUX_PAD(0x658, 0x2D4, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12	IOMUX_PAD(0x658, 0x2D4, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__PATA_DATA_13	IOMUX_PAD(0x65C, 0x2D8, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__GPIO2_13		IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__ESDHC2_DAT5		IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__EMI_NANDF_D_13	IOMUX_PAD(0x65C, 0x2D8, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__ESDHC4_DAT1		IOMUX_PAD(0x65C, 0x2D8, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13	IOMUX_PAD(0x65C, 0x2D8, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13	IOMUX_PAD(0x65C, 0x2D8, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__PATA_DATA_14	IOMUX_PAD(0x660, 0x2DC, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__GPIO2_14		IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__ESDHC2_DAT6		IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__EMI_NANDF_D_14	IOMUX_PAD(0x660, 0x2DC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__ESDHC4_DAT2		IOMUX_PAD(0x660, 0x2DC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14	IOMUX_PAD(0x660, 0x2DC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14	IOMUX_PAD(0x660, 0x2DC, 6, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__PATA_DATA_15	IOMUX_PAD(0x664, 0x2E0, 0, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__GPIO2_15		IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__ESDHC2_DAT7		IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__EMI_NANDF_D_15	IOMUX_PAD(0x664, 0x2E0, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__ESDHC4_DAT3		IOMUX_PAD(0x664, 0x2E0, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15	IOMUX_PAD(0x664, 0x2E0, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15	IOMUX_PAD(0x664, 0x2E0, 6, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA0__ESDHC1_DAT0	IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA0__GPIO1_16	IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA0__GPT_CAPIN1	IOMUX_PAD(0x66C, 0x2E4, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA0__CSPI_MISO	IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, 0)
+#define _MX53_PAD_SD1_DATA0__CCM_PLL3_BYP	IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, 0)
+#define _MX53_PAD_SD1_DATA1__ESDHC1_DAT1	IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA1__GPIO1_17	IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA1__GPT_CAPIN2	IOMUX_PAD(0x670, 0x2E8, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA1__CSPI_SS0	IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, 0)
+#define _MX53_PAD_SD1_DATA1__CCM_PLL4_BYP	IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, 0)
+#define _MX53_PAD_SD1_CMD__ESDHC1_CMD	IOMUX_PAD(0x674, 0x2EC, IOMUX_CONFIG_SION, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CMD__GPIO1_18		IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CMD__GPT_CMPOUT1	IOMUX_PAD(0x674, 0x2EC, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CMD__CSPI_MOSI		IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, 0)
+#define _MX53_PAD_SD1_CMD__CCM_PLL1_BYP	IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, 0)
+#define _MX53_PAD_SD1_DATA2__ESDHC1_DAT2		IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__GPIO1_19		IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__GPT_CMPOUT2		IOMUX_PAD(0x678, 0x2F0, 2, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__PWM2_PWMO		IOMUX_PAD(0x678, 0x2F0, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_B		IOMUX_PAD(0x678, 0x2F0, 4, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__CSPI_SS1		IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, 0)
+#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB	IOMUX_PAD(0x678, 0x2F0, 6, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA2__CCM_PLL2_BYP		IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, 0)
+#define _MX53_PAD_SD1_CLK__ESDHC1_CLK	IOMUX_PAD(0x67C, 0x2F4, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CLK__GPIO1_20		IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CLK__OSC32k_32K_OUT	IOMUX_PAD(0x67C, 0x2F4, 2, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CLK__GPT_CLKIN		IOMUX_PAD(0x67C, 0x2F4, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_CLK__CSPI_SCLK		IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, 0)
+#define _MX53_PAD_SD1_CLK__SATA_PHY_DTB_0	IOMUX_PAD(0x67C, 0x2F4, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__ESDHC1_DAT3	IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__GPIO1_21	IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__GPT_CMPOUT3	IOMUX_PAD(0x680, 0x2F8, 2, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__PWM1_PWMO	IOMUX_PAD(0x680, 0x2F8, 3, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_B	IOMUX_PAD(0x680, 0x2F8, 4, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__CSPI_SS2	IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, 0)
+#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB	IOMUX_PAD(0x680, 0x2F8, 6, 0x0, 0, 0)
+#define _MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1	IOMUX_PAD(0x680, 0x2F8, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CLK__ESDHC2_CLK	IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CLK__GPIO1_10		IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CLK__KPP_COL_5		IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, 0)
+#define _MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS	IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, 0)
+#define _MX53_PAD_SD2_CLK__CSPI_SCLK		IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, 0)
+#define _MX53_PAD_SD2_CLK__SCC_RANDOM_V	IOMUX_PAD(0x688, 0x2FC, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CMD__ESDHC2_CMD	IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CMD__GPIO1_11		IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_CMD__KPP_ROW_5	IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, 0)
+#define _MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC	IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, 0)
+#define _MX53_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, 0)
+#define _MX53_PAD_SD2_CMD__SCC_RANDOM	IOMUX_PAD(0x68C, 0x300, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA3__ESDHC2_DAT3	IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA3__GPIO1_12	IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA3__KPP_COL_6	IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, 0)
+#define _MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, 0)
+#define _MX53_PAD_SD2_DATA3__CSPI_SS2	IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, 0)
+#define _MX53_PAD_SD2_DATA3__SJC_DONE	IOMUX_PAD(0x690, 0x304, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA2__ESDHC2_DAT2	IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA2__GPIO1_13	IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA2__KPP_ROW_6	IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, 0)
+#define _MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, 0)
+#define _MX53_PAD_SD2_DATA2__CSPI_SS1	IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, 0)
+#define _MX53_PAD_SD2_DATA2__SJC_FAIL	IOMUX_PAD(0x694, 0x308, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1	IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA1__GPIO1_14	IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA1__KPP_COL_7	IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0)
+#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0)
+#define _MX53_PAD_SD2_DATA1__CSPI_SS0	IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0)
+#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO	IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0	IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA0__GPIO1_15	IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, 0)
+#define _MX53_PAD_SD2_DATA0__KPP_ROW_7	IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, 0)
+#define _MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, 0)
+#define _MX53_PAD_SD2_DATA0__CSPI_MISO	IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, 0)
+#define _MX53_PAD_SD2_DATA0__RTIC_DONE_INT	IOMUX_PAD(0x69C, 0x310, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__CCM_CLKO		IOMUX_PAD(0x6A4, 0x314, 0, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__GPIO1_0		IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__KPP_COL_5		IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, 0)
+#define _MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__EPIT1_EPITO	IOMUX_PAD(0x6A4, 0x314, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__SRTC_ALARM_DEB	IOMUX_PAD(0x6A4, 0x314, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__USBOH3_USBH1_PWR	IOMUX_PAD(0x6A4, 0x314, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_0__CSU_TD		IOMUX_PAD(0x6A4, 0x314, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__ESAI1_SCKR		IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, 0)
+#define _MX53_PAD_GPIO_1__GPIO1_1		IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__KPP_ROW_5		IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, 0)
+#define _MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK	IOMUX_PAD(0x6A8, 0x318, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__PWM2_PWMO	IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__WDOG2_WDOG_B	IOMUX_PAD(0x6A8, 0x318, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__ESDHC1_CD		IOMUX_PAD(0x6A8, 0x318, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_1__SRC_TESTER_ACK	IOMUX_PAD(0x6A8, 0x318, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_9__ESAI1_FSR		IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, 0)
+#define _MX53_PAD_GPIO_9__GPIO1_9		IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_9__KPP_COL_6		IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, 0)
+#define _MX53_PAD_GPIO_9__CCM_REF_EN_B	IOMUX_PAD(0x6AC, 0x31C, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_9__PWM1_PWMO	IOMUX_PAD(0x6AC, 0x31C, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_9__WDOG1_WDOG_B	IOMUX_PAD(0x6AC, 0x31C, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_9__ESDHC1_WP		IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, 0)
+#define _MX53_PAD_GPIO_9__SCC_FAIL_STATE	IOMUX_PAD(0x6AC, 0x31C, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_3__ESAI1_HCKR		IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, 0)
+#define _MX53_PAD_GPIO_3__GPIO1_3		IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_3__I2C3_SCL		IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, 0)
+#define _MX53_PAD_GPIO_3__DPLLIP1_TOG_EN	IOMUX_PAD(0x6B0, 0x320, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_3__CCM_CLKO2		IOMUX_PAD(0x6B0, 0x320, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0	IOMUX_PAD(0x6B0, 0x320, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_3__USBOH3_USBH1_OC	IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, 0)
+#define _MX53_PAD_GPIO_3__MLB_MLBCLK		IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, 0)
+#define _MX53_PAD_GPIO_6__ESAI1_SCKT		IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, 0)
+#define _MX53_PAD_GPIO_6__GPIO1_6		IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_6__I2C3_SDA		IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, 0)
+#define _MX53_PAD_GPIO_6__CCM_CCM_OUT_0	IOMUX_PAD(0x6B4, 0x324, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_6__CSU_CSU_INT_DEB	IOMUX_PAD(0x6B4, 0x324, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1	IOMUX_PAD(0x6B4, 0x324, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_6__ESDHC2_LCTL	IOMUX_PAD(0x6B4, 0x324, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_6__MLB_MLBSIG		IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, 0)
+#define _MX53_PAD_GPIO_2__ESAI1_FST		IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, 0)
+#define _MX53_PAD_GPIO_2__GPIO1_2		IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_2__KPP_ROW_6		IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, 0)
+#define _MX53_PAD_GPIO_2__CCM_CCM_OUT_1	IOMUX_PAD(0x6B8, 0x328, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0	IOMUX_PAD(0x6B8, 0x328, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2	IOMUX_PAD(0x6B8, 0x328, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_2__ESDHC2_WP		IOMUX_PAD(0x6B8, 0x328, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_2__MLB_MLBDAT	IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, 0)
+#define _MX53_PAD_GPIO_4__ESAI1_HCKT		IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, 0)
+#define _MX53_PAD_GPIO_4__GPIO1_4		IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_4__KPP_COL_7		IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, 0)
+#define _MX53_PAD_GPIO_4__CCM_CCM_OUT_2	IOMUX_PAD(0x6BC, 0x32C, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1	IOMUX_PAD(0x6BC, 0x32C, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3	IOMUX_PAD(0x6BC, 0x32C, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_4__ESDHC2_CD		IOMUX_PAD(0x6BC, 0x32C, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_4__SCC_SEC_STATE	IOMUX_PAD(0x6BC, 0x32C, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_5__ESAI1_TX2_RX3	IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, 0)
+#define _MX53_PAD_GPIO_5__GPIO1_5		IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_5__KPP_ROW_7		IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, 0)
+#define _MX53_PAD_GPIO_5__CCM_CLKO		IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2	IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_5__I2C3_SCL		IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0)
+#define _MX53_PAD_GPIO_5__CCM_PLL1_BYP	IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0)
+#define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1	IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0)
+#define _MX53_PAD_GPIO_7__GPIO1_7		IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_7__EPIT1_EPITO	IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_7__CAN1_TXCAN	IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_7__UART2_TXD_MUX	IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0)
+#define _MX53_PAD_GPIO_7__FIRI_RXD		IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0)
+#define _MX53_PAD_GPIO_7__SPDIF_PLOCK	IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_7__CCM_PLL2_BYP	IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0)
+#define _MX53_PAD_GPIO_8__ESAI1_TX5_RX0	IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, 0)
+#define _MX53_PAD_GPIO_8__GPIO1_8		IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_8__EPIT2_EPITO	IOMUX_PAD(0x6C8, 0x338, 2, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_8__CAN1_RXCAN	IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, 0)
+#define _MX53_PAD_GPIO_8__UART2_RXD_MUX	IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, 0)
+#define _MX53_PAD_GPIO_8__FIRI_TXD		IOMUX_PAD(0x6C8, 0x338, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_8__SPDIF_SRCLK	IOMUX_PAD(0x6C8, 0x338, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_8__CCM_PLL3_BYP	IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, 0)
+#define _MX53_PAD_GPIO_16__ESAI1_TX3_RX2	IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, 0)
+#define _MX53_PAD_GPIO_16__GPIO7_11		IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT	IOMUX_PAD(0x6CC, 0x33C, 2, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1	IOMUX_PAD(0x6CC, 0x33C, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_16__SPDIF_IN1		IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, 0)
+#define _MX53_PAD_GPIO_16__I2C3_SDA		IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, 0)
+#define _MX53_PAD_GPIO_16__SJC_DE_B		IOMUX_PAD(0x6CC, 0x33C, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_17__ESAI1_TX0		IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, 0)
+#define _MX53_PAD_GPIO_17__GPIO7_12		IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0	IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, 0)
+#define _MX53_PAD_GPIO_17__GPC_PMIC_RDY	IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, 0)
+#define _MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG	IOMUX_PAD(0x6D0, 0x340, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_17__SPDIF_OUT1	IOMUX_PAD(0x6D0, 0x340, 5, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_17__IPU_SNOOP2	IOMUX_PAD(0x6D0, 0x340, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_17__SJC_JTAG_ACT	IOMUX_PAD(0x6D0, 0x340, 7, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_18__ESAI1_TX1		IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, 0)
+#define _MX53_PAD_GPIO_18__GPIO7_13		IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1	IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, 0)
+#define _MX53_PAD_GPIO_18__OWIRE_LINE	IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, 0)
+#define _MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG	IOMUX_PAD(0x6D4, 0x344, 4, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK	IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, 0)
+#define _MX53_PAD_GPIO_18__ESDHC1_LCTL	IOMUX_PAD(0x6D4, 0x344, 6, 0x0, 0, 0)
+#define _MX53_PAD_GPIO_18__SRC_SYSTEM_RST	IOMUX_PAD(0x6D4, 0x344, 7, 0x0, 0, 0)
 
-/* UART3 */
-#define MX53_PAD_ATA_CS_0__UART3_TXD	IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_CS_1__UART3_RXD	IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DA_1__UART3_CTS	IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_ATA_DA_2__UART3_RTS	IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-
-#define MX53_PAD_GPIO_19__GPIO_4_5		IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO_4_6		IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO_4_7		IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO_4_8		IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO_4_9		IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO_4_10		IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO_4_11	IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO_4_12		IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO_4_13	IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO_4_14		IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO_4_15	IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD	IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16	IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO_4_17	IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO_4_18		IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO_4_19		IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO_4_20		IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO_4_21	IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO_4_22	IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO_4_23	IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO_4_24	IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO_4_25	IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO_4_26	IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO_4_27	IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO_4_28	IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO_4_29	IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO_4_30	IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO_4_31	IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO_5_5	IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO_5_6	IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO_5_7	IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO_5_8	IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO_5_9	IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO_5_10	IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO_5_11	IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO_5_12	IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO_5_13	IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO_5_14	IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO_5_15	IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO_5_16	IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO_5_17	IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18	IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO_5_19	IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20	IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO_5_21	IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D4__GPIO_5_22		IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D5__GPIO_5_23		IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D6__GPIO_5_24		IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D7__GPIO_5_25		IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D8__GPIO_5_26		IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D9__GPIO_5_27		IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D10__GPIO_5_28		IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D11__GPIO_5_29		IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D12__GPIO_5_30		IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D13__GPIO_5_31		IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D14__GPIO_6_0		IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D15__GPIO_6_1		IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D16__GPIO_6_2		IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D17__GPIO_6_3		IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D18__GPIO_6_4		IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_D19__GPIO_6_5		IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_CSI0__NVCC_CSI0	IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_TMS__JTAG_TMS		IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_MOD__JTAG_MOD		IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB	IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_TDI__JTAG_TDI		IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_TCK__JTAG_TCK		IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_JTAG_TDO__JTAG_TDO		IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO_5_2		IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO_2_30		IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__CSPI1_SCLK		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__CSPI1_MISO		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__CSPI1_MOSI		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO_3_19		IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO_3_20		IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO_3_21		IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO_3_22		IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO_3_23		IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO_2_31		IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO_3_24		IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO_3_25		IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO_3_26		IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO_3_27		IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO_3_28		IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO_3_29		IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO_3_30		IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO_3_31		IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_EIM1__NVCC_EIM1	IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO_5_4		IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO_6_6		IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO_2_16		IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO_2_17		IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO_2_18		IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO_2_19		IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO_2_20		IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO_2_21		IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO_2_22		IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO_2_23		IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO_2_24		IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO_2_25		IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO_2_26		IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO_2_27		IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_EIM4__NVCC_EIM4	IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO_2_28		IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO_2_29		IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO_3_0		IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO_3_1		IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO_3_2		IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO_3_3		IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO_3_4		IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO_3_5		IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO_3_6		IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO_3_7		IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO_3_8		IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO_3_9		IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO_3_10		IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO_3_11		IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO_3_12		IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO_3_13		IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO_3_14		IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO_3_15		IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO_6_12	IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO_6_13	IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO_5_0		IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_BCLK__EIM_BCLK		IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_EIM7__NVCC_EIM7	IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22	IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24	IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26	IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28	IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30	IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22	IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24	IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26	IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28	IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30	IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO_4_0		IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO_4_1		IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO_4_2		IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO_4_3		IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO_4_4		IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_DQM3__DRAM_DQM3	IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3	IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1	IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_DQM2__DRAM_DQM2	IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1	IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2	IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_RESET__DRAM_RESET	IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1	IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_CAS__DRAM_CAS		IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0	IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0	IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0	IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_DQM0__DRAM_DQM0	IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_RAS__DRAM_RAS		IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0	IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1	IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DRAM_DQM1__DRAM_DQM1	IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ	IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ	IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO_6_7		IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO_6_8	IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO_6_9	IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO_6_10	IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO_6_11	IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO_6_14	IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO_6_15	IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO_6_16	IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_NANDF__NVCC_NANDF	IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO_1_22		IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO_1_23	IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO_1_24	IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO_1_25	IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO_1_26		IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO_1_27		IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO_1_28	IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO_1_29		IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO_1_30		IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO_1_31		IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_FEC__NVCC_FEC		IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DIOW__GPIO_6_17	IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DMACK__GPIO_6_18	IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DMARQ__GPIO_7_0	IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1	IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_INTRQ__GPIO_7_2		IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DIOR__GPIO_7_3		IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_RESET_B__GPIO_7_4	IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_IORDY__GPIO_7_5		IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DA_0__GPIO_7_6		IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DA_1__GPIO_7_7		IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DA_2__GPIO_7_8		IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_CS_0__GPIO_7_9		IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_CS_1__GPIO_7_10		IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_ATA2__NVCC_ATA2	IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA0__GPIO_2_0	IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA1__GPIO_2_1	IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA2__GPIO_2_2	IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA3__GPIO_2_3	IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA4__GPIO_2_4	IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA5__GPIO_2_5	IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA6__GPIO_2_6	IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA7__GPIO_2_7	IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA8__GPIO_2_8	IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA9__GPIO_2_9	IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA10__GPIO_2_10	IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA11__GPIO_2_11	IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA12__GPIO_2_12	IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA13__GPIO_2_13	IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA14__GPIO_2_14	IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_ATA_DATA15__GPIO_2_15	IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_ATA0__NVCC_ATA0	IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO_1_16	IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO_1_17	IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO_1_18		IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO_1_19	IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO_1_20		IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO_1_21	IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_SD1__NVCC_SD1		IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO_1_10		IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO_1_11		IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO_1_12	IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO_1_13	IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO_1_14	IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO_1_15	IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_SD2__NVCC_SD2		IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO_1_0		IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO_1_1		IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO_1_9		IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO_1_3		IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO_1_6		IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO_1_2		IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO_1_4		IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO_1_5		IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO_1_7		IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO_1_8		IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO_7_11		IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO_7_12		IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO_7_13		IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_NVCC_GPIO__NVCC_GPIO	IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_POR_B__POR_B			IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_RESET_IN_B__RESET_IN_B	IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_TEST_MODE__TEST_MODE	IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_ADDDS__GRP_ADDDS	IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL	IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE	IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDRPK__GRP_DDRPK	IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3	IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS	IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE	IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_B0DS__GRP_B0DS		IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_B1DS__GRP_B1DS		IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_CTLDS__GRP_CTLDS	IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE	IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_B2DS__GRP_B2DS		IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_GRP_B3DS__GRP_B3DS		IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__KPP_COL_5		(_MX53_PAD_GPIO_19__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__GPIO4_5		(_MX53_PAD_GPIO_19__GPIO4_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__CCM_CLKO		(_MX53_PAD_GPIO_19__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__SPDIF_OUT1		(_MX53_PAD_GPIO_19__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2		(_MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__ECSPI1_RDY		(_MX53_PAD_GPIO_19__ECSPI1_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__FEC_TDATA_3		(_MX53_PAD_GPIO_19__FEC_TDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT		(_MX53_PAD_GPIO_19__SRC_INT_BOOT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__KPP_COL_0		(_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__GPIO4_6		(_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC		(_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX		(_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK		(_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3		(_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST		(_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0		(_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__GPIO4_7		(_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		(_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX		(_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI		(_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER		(_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__KPP_COL_1		(_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__GPIO4_8		(_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		(_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX		(_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO		(_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK		(_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY		(_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1		(_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__GPIO4_9		(_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		(_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX		(_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0		(_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__FEC_COL		(_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID		(_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__KPP_COL_2		(_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__GPIO4_10		(_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN		(_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__FEC_MDIO		(_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1		(_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2		(_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE		(_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2		(_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__GPIO4_11		(_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN		(_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__FEC_MDC		(_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2		(_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2		(_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR		(_MX53_PAD_KEY_ROW2__USBPHY1_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__KPP_COL_3		(_MX53_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__GPIO4_12		(_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP		(_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__SPDIF_IN1		(_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__I2C2_SCL		(_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3		(_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__FEC_CRS		(_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK		(_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3		(_MX53_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__GPIO4_13		(_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM		(_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK		(_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__I2C2_SDA		(_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT		(_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP		(_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0		(_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__KPP_COL_4		(_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__GPIO4_14		(_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN		(_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__IPU_SISG_4		(_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__UART5_RTS		(_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC		(_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1		(_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4		(_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__GPIO4_15		(_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN		(_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5		(_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__UART5_CTS		(_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		(_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID		(_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		(_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16		(_MX53_PAD_DI0_DISP_CLK__GPIO4_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR		(_MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		(_MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0		(_MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID		(_MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		(_MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__GPIO4_17		(_MX53_PAD_DI0_PIN15__GPIO4_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		(_MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		(_MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1		(_MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID		(_MX53_PAD_DI0_PIN15__USBPHY1_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		(_MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__GPIO4_18		(_MX53_PAD_DI0_PIN2__GPIO4_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		(_MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		(_MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2		(_MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION		(_MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		(_MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__GPIO4_19		(_MX53_PAD_DI0_PIN3__GPIO4_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		(_MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		(_MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3		(_MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG		(_MX53_PAD_DI0_PIN3__USBPHY1_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		(_MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__GPIO4_20		(_MX53_PAD_DI0_PIN4__GPIO4_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		(_MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP		(_MX53_PAD_DI0_PIN4__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		(_MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4		(_MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		(_MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		(_MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__GPIO4_21		(_MX53_PAD_DISP0_DAT0__GPIO4_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK		(_MX53_PAD_DISP0_DAT0__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		(_MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		(_MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5		(_MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY		(_MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		(_MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__GPIO4_22		(_MX53_PAD_DISP0_DAT1__GPIO4_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI		(_MX53_PAD_DISP0_DAT1__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		(_MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL		(_MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6		(_MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID		(_MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		(_MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__GPIO4_23		(_MX53_PAD_DISP0_DAT2__GPIO4_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO		(_MX53_PAD_DISP0_DAT2__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		(_MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		(_MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7		(_MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE		(_MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		(_MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__GPIO4_24		(_MX53_PAD_DISP0_DAT3__GPIO4_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0		(_MX53_PAD_DISP0_DAT3__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		(_MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		(_MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8		(_MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR		(_MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		(_MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__GPIO4_25		(_MX53_PAD_DISP0_DAT4__GPIO4_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1		(_MX53_PAD_DISP0_DAT4__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		(_MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		(_MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9		(_MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK		(_MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		(_MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__GPIO4_26		(_MX53_PAD_DISP0_DAT5__GPIO4_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2		(_MX53_PAD_DISP0_DAT5__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		(_MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		(_MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10		(_MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		(_MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		(_MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__GPIO4_27		(_MX53_PAD_DISP0_DAT6__GPIO4_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3		(_MX53_PAD_DISP0_DAT6__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		(_MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		(_MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11		(_MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		(_MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		(_MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__GPIO4_28		(_MX53_PAD_DISP0_DAT7__GPIO4_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY		(_MX53_PAD_DISP0_DAT7__CSPI_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		(_MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		(_MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12		(_MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID		(_MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		(_MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__GPIO4_29		(_MX53_PAD_DISP0_DAT8__GPIO4_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO		(_MX53_PAD_DISP0_DAT8__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B		(_MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		(_MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13		(_MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID		(_MX53_PAD_DISP0_DAT8__USBPHY2_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		(_MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__GPIO4_30		(_MX53_PAD_DISP0_DAT9__GPIO4_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO		(_MX53_PAD_DISP0_DAT9__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B		(_MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		(_MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14		(_MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0		(_MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		(_MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__GPIO4_31		(_MX53_PAD_DISP0_DAT10__GPIO4_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP		(_MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3		(_MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15		(_MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1		(_MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		(_MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__GPIO5_5		(_MX53_PAD_DISP0_DAT11__GPIO5_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT		(_MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4		(_MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16		(_MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2		(_MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		(_MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__GPIO5_6		(_MX53_PAD_DISP0_DAT12__GPIO5_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK		(_MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5		(_MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17		(_MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3		(_MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		(_MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__GPIO5_7		(_MX53_PAD_DISP0_DAT13__GPIO5_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		(_MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0		(_MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18		(_MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4		(_MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		(_MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__GPIO5_8		(_MX53_PAD_DISP0_DAT14__GPIO5_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		(_MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1		(_MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19		(_MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5		(_MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		(_MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__GPIO5_9		(_MX53_PAD_DISP0_DAT15__GPIO5_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1		(_MX53_PAD_DISP0_DAT15__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1		(_MX53_PAD_DISP0_DAT15__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2		(_MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20		(_MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6		(_MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		(_MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__GPIO5_10		(_MX53_PAD_DISP0_DAT16__GPIO5_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI		(_MX53_PAD_DISP0_DAT16__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		(_MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		(_MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3		(_MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21		(_MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7		(_MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		(_MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__GPIO5_11		(_MX53_PAD_DISP0_DAT17__GPIO5_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO		(_MX53_PAD_DISP0_DAT17__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		(_MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		(_MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4		(_MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22		(_MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		(_MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__GPIO5_12		(_MX53_PAD_DISP0_DAT18__GPIO5_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0		(_MX53_PAD_DISP0_DAT18__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		(_MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		(_MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5		(_MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23		(_MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2		(_MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		(_MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__GPIO5_13		(_MX53_PAD_DISP0_DAT19__GPIO5_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK		(_MX53_PAD_DISP0_DAT19__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		(_MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		(_MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6		(_MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24		(_MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3		(_MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		(_MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__GPIO5_14		(_MX53_PAD_DISP0_DAT20__GPIO5_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK		(_MX53_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		(_MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7		(_MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25		(_MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI		(_MX53_PAD_DISP0_DAT20__SATA_PHY_TDI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		(_MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__GPIO5_15		(_MX53_PAD_DISP0_DAT21__GPIO5_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI		(_MX53_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		(_MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		(_MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26		(_MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO		(_MX53_PAD_DISP0_DAT21__SATA_PHY_TDO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		(_MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__GPIO5_16		(_MX53_PAD_DISP0_DAT22__GPIO5_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO		(_MX53_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		(_MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		(_MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27		(_MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK		(_MX53_PAD_DISP0_DAT22__SATA_PHY_TCK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		(_MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__GPIO5_17		(_MX53_PAD_DISP0_DAT23__GPIO5_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0		(_MX53_PAD_DISP0_DAT23__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		(_MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		(_MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28		(_MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS		(_MX53_PAD_DISP0_DAT23__SATA_PHY_TMS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK		(_MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18		(_MX53_PAD_CSI0_PIXCLK__GPIO5_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		(_MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29		(_MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC		(_MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__GPIO5_19		(_MX53_PAD_CSI0_MCLK__GPIO5_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK		(_MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		(_MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30		(_MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL		(_MX53_PAD_CSI0_MCLK__TPIU_TRCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN		(_MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20		(_MX53_PAD_CSI0_DATA_EN__GPIO5_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		(_MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31		(_MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK		(_MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC		(_MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21		(_MX53_PAD_CSI0_VSYNC__GPIO5_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		(_MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32		(_MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0		(_MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4		(_MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__GPIO5_22		(_MX53_PAD_CSI0_DAT4__GPIO5_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5		(_MX53_PAD_CSI0_DAT4__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK		(_MX53_PAD_CSI0_DAT4__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP		(_MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		(_MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33		(_MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1		(_MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5		(_MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__GPIO5_23		(_MX53_PAD_CSI0_DAT5__GPIO5_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5		(_MX53_PAD_CSI0_DAT5__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI		(_MX53_PAD_CSI0_DAT5__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT		(_MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		(_MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34		(_MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2		(_MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6		(_MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__GPIO5_24		(_MX53_PAD_CSI0_DAT6__GPIO5_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6		(_MX53_PAD_CSI0_DAT6__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO		(_MX53_PAD_CSI0_DAT6__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK		(_MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		(_MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35		(_MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3		(_MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7		(_MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__GPIO5_25		(_MX53_PAD_CSI0_DAT7__GPIO5_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6		(_MX53_PAD_CSI0_DAT7__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0		(_MX53_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR		(_MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		(_MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36		(_MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4		(_MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8		(_MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__GPIO5_26		(_MX53_PAD_CSI0_DAT8__GPIO5_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7		(_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK		(_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC		(_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA		(_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37		(_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5		(_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9		(_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__GPIO5_27		(_MX53_PAD_CSI0_DAT9__GPIO5_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7		(_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		(_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR		(_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL		(_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38		(_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		(_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		(_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__GPIO5_28		(_MX53_PAD_CSI0_DAT10__GPIO5_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX		(_MX53_PAD_CSI0_DAT10__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO		(_MX53_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		(_MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		(_MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39		(_MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7		(_MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11		(_MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__GPIO5_29		(_MX53_PAD_CSI0_DAT11__GPIO5_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX		(_MX53_PAD_CSI0_DAT11__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0		(_MX53_PAD_CSI0_DAT11__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		(_MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		(_MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40		(_MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		(_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		(_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__GPIO5_30		(_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		(_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		(_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		(_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41		(_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		(_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		(_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__GPIO5_31		(_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		(_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		(_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		(_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42		(_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		(_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		(_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__GPIO6_0		(_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		(_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		(_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		(_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43		(_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		(_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		(_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__GPIO6_1		(_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		(_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		(_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		(_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44		(_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		(_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		(_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__GPIO6_2		(_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__UART4_RTS		(_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		(_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		(_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45		(_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		(_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		(_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__GPIO6_3		(_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__UART4_CTS		(_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		(_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		(_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46		(_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		(_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		(_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__GPIO6_4		(_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__UART5_RTS		(_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		(_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		(_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47		(_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		(_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		(_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__GPIO6_5		(_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__UART5_CTS		(_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		(_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		(_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48		(_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK		(_MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25		(_MX53_PAD_EIM_A25__EMI_WEIM_A_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__GPIO5_2		(_MX53_PAD_EIM_A25__GPIO5_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__ECSPI2_RDY		(_MX53_PAD_EIM_A25__ECSPI2_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12		(_MX53_PAD_EIM_A25__IPU_DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__CSPI_SS1		(_MX53_PAD_EIM_A25__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS		(_MX53_PAD_EIM_A25__IPU_DI0_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK		(_MX53_PAD_EIM_A25__USBPHY1_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2		(_MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__GPIO2_30		(_MX53_PAD_EIM_EB2__GPIO2_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK		(_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS		(_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0		(_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__I2C2_SCL		(_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16		(_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__GPIO3_16		(_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5		(_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK		(_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK		(_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__I2C2_SDA		(_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17		(_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__GPIO3_17		(_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6		(_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN		(_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__ECSPI1_MISO		(_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__I2C3_SCL		(_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18		(_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__GPIO3_18		(_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7		(_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO		(_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI		(_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__I2C3_SDA		(_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS		(_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19		(_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__GPIO3_19		(_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8		(_MX53_PAD_EIM_D19__IPU_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS		(_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__ECSPI1_SS1		(_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__EPIT1_EPITO		(_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__UART1_CTS		(_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC		(_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20		(_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__GPIO3_20		(_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16		(_MX53_PAD_EIM_D20__IPU_DI0_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		(_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__CSPI_SS0		(_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__EPIT2_EPITO		(_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__UART1_RTS		(_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR		(_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21		(_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__GPIO3_21		(_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17		(_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK		(_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__CSPI_SCLK		(_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__I2C1_SCL		(_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC		(_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22		(_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__GPIO3_22		(_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1		(_MX53_PAD_EIM_D22__IPU_DI0_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN		(_MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__CSPI_MISO		(_MX53_PAD_EIM_D22__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR		(_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23		(_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__GPIO3_23		(_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__UART3_CTS		(_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__UART1_DCD		(_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS		(_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2		(_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN		(_MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14		(_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3		(_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__GPIO2_31		(_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__UART3_RTS		(_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__UART1_RI		(_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3		(_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		(_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16		(_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24		(_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__GPIO3_24		(_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX		(_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__ECSPI1_SS2		(_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__CSPI_SS2		(_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS		(_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__ECSPI2_SS2		(_MX53_PAD_EIM_D24__ECSPI2_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__UART1_DTR		(_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25		(_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__GPIO3_25		(_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX		(_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__ECSPI1_SS3		(_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__CSPI_SS3		(_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		(_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__ECSPI2_SS3		(_MX53_PAD_EIM_D25__ECSPI2_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__UART1_DSR		(_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26		(_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__GPIO3_26		(_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX		(_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__FIRI_RXD		(_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1		(_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11		(_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__IPU_SISG_2		(_MX53_PAD_EIM_D26__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		(_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27		(_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__GPIO3_27		(_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX		(_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__FIRI_TXD		(_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0		(_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13		(_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__IPU_SISG_3		(_MX53_PAD_EIM_D27__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		(_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28		(_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__GPIO3_28		(_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__UART2_CTS		(_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		(_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__CSPI_MOSI		(_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__I2C1_SDA		(_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG		(_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13		(_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29		(_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__GPIO3_29		(_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__UART2_RTS		(_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS		(_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__CSPI_SS0		(_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15		(_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC		(_MX53_PAD_EIM_D29__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14		(_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30		(_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__GPIO3_30		(_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__UART3_CTS		(_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3		(_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11		(_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		(_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC		(_MX53_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC		(_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31		(_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__GPIO3_31		(_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__UART3_RTS		(_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2		(_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12		(_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		(_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR		(_MX53_PAD_EIM_D31__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR		(_MX53_PAD_EIM_D31__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24		(_MX53_PAD_EIM_A24__EMI_WEIM_A_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__GPIO5_4		(_MX53_PAD_EIM_A24__GPIO5_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19		(_MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19		(_MX53_PAD_EIM_A24__IPU_CSI1_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__IPU_SISG_2		(_MX53_PAD_EIM_A24__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID		(_MX53_PAD_EIM_A24__USBPHY2_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23		(_MX53_PAD_EIM_A23__EMI_WEIM_A_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__GPIO6_6		(_MX53_PAD_EIM_A23__GPIO6_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18		(_MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18		(_MX53_PAD_EIM_A23__IPU_CSI1_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__IPU_SISG_3		(_MX53_PAD_EIM_A23__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION		(_MX53_PAD_EIM_A23__USBPHY2_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22		(_MX53_PAD_EIM_A22__EMI_WEIM_A_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A22__GPIO2_16		(_MX53_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17		(_MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17		(_MX53_PAD_EIM_A22__IPU_CSI1_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7		(_MX53_PAD_EIM_A22__SRC_BT_CFG1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21		(_MX53_PAD_EIM_A21__EMI_WEIM_A_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A21__GPIO2_17		(_MX53_PAD_EIM_A21__GPIO2_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16		(_MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16		(_MX53_PAD_EIM_A21__IPU_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6		(_MX53_PAD_EIM_A21__SRC_BT_CFG1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20		(_MX53_PAD_EIM_A20__EMI_WEIM_A_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A20__GPIO2_18		(_MX53_PAD_EIM_A20__GPIO2_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15		(_MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15		(_MX53_PAD_EIM_A20__IPU_CSI1_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5		(_MX53_PAD_EIM_A20__SRC_BT_CFG1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19		(_MX53_PAD_EIM_A19__EMI_WEIM_A_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A19__GPIO2_19		(_MX53_PAD_EIM_A19__GPIO2_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14		(_MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14		(_MX53_PAD_EIM_A19__IPU_CSI1_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4		(_MX53_PAD_EIM_A19__SRC_BT_CFG1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18		(_MX53_PAD_EIM_A18__EMI_WEIM_A_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A18__GPIO2_20		(_MX53_PAD_EIM_A18__GPIO2_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13		(_MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13		(_MX53_PAD_EIM_A18__IPU_CSI1_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3		(_MX53_PAD_EIM_A18__SRC_BT_CFG1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17		(_MX53_PAD_EIM_A17__EMI_WEIM_A_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A17__GPIO2_21		(_MX53_PAD_EIM_A17__GPIO2_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12		(_MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12		(_MX53_PAD_EIM_A17__IPU_CSI1_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2		(_MX53_PAD_EIM_A17__SRC_BT_CFG1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16		(_MX53_PAD_EIM_A16__EMI_WEIM_A_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A16__GPIO2_22		(_MX53_PAD_EIM_A16__GPIO2_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK		(_MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK		(_MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1		(_MX53_PAD_EIM_A16__SRC_BT_CFG1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0		(_MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS0__GPIO2_23		(_MX53_PAD_EIM_CS0__GPIO2_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK		(_MX53_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5		(_MX53_PAD_EIM_CS0__IPU_DI1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1		(_MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS1__GPIO2_24		(_MX53_PAD_EIM_CS1__GPIO2_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI		(_MX53_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6		(_MX53_PAD_EIM_CS1__IPU_DI1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE		(_MX53_PAD_EIM_OE__EMI_WEIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_OE__GPIO2_25		(_MX53_PAD_EIM_OE__GPIO2_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_OE__ECSPI2_MISO		(_MX53_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7		(_MX53_PAD_EIM_OE__IPU_DI1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG		(_MX53_PAD_EIM_OE__USBPHY2_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW		(_MX53_PAD_EIM_RW__EMI_WEIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_RW__GPIO2_26		(_MX53_PAD_EIM_RW__GPIO2_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_RW__ECSPI2_SS0		(_MX53_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8		(_MX53_PAD_EIM_RW__IPU_DI1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT		(_MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA		(_MX53_PAD_EIM_LBA__EMI_WEIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_LBA__GPIO2_27		(_MX53_PAD_EIM_LBA__GPIO2_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1		(_MX53_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17		(_MX53_PAD_EIM_LBA__IPU_DI1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0		(_MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0		(_MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__GPIO2_28		(_MX53_PAD_EIM_EB0__GPIO2_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11		(_MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11		(_MX53_PAD_EIM_EB0__IPU_CSI1_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY		(_MX53_PAD_EIM_EB0__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7		(_MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1		(_MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB1__GPIO2_29		(_MX53_PAD_EIM_EB1__GPIO2_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10		(_MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10		(_MX53_PAD_EIM_EB1__IPU_CSI1_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6		(_MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0		(_MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA0__GPIO3_0		(_MX53_PAD_EIM_DA0__GPIO3_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9		(_MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9		(_MX53_PAD_EIM_DA0__IPU_CSI1_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5		(_MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1		(_MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA1__GPIO3_1		(_MX53_PAD_EIM_DA1__GPIO3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8		(_MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8		(_MX53_PAD_EIM_DA1__IPU_CSI1_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4		(_MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2		(_MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA2__GPIO3_2		(_MX53_PAD_EIM_DA2__GPIO3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7		(_MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7		(_MX53_PAD_EIM_DA2__IPU_CSI1_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3		(_MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3		(_MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA3__GPIO3_3		(_MX53_PAD_EIM_DA3__GPIO3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6		(_MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6		(_MX53_PAD_EIM_DA3__IPU_CSI1_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2		(_MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4		(_MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA4__GPIO3_4		(_MX53_PAD_EIM_DA4__GPIO3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5		(_MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5		(_MX53_PAD_EIM_DA4__IPU_CSI1_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7		(_MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5		(_MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA5__GPIO3_5		(_MX53_PAD_EIM_DA5__GPIO3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		(_MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4		(_MX53_PAD_EIM_DA5__IPU_CSI1_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6		(_MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6		(_MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA6__GPIO3_6		(_MX53_PAD_EIM_DA6__GPIO3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		(_MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3		(_MX53_PAD_EIM_DA6__IPU_CSI1_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5		(_MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7		(_MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA7__GPIO3_7		(_MX53_PAD_EIM_DA7__GPIO3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2		(_MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2		(_MX53_PAD_EIM_DA7__IPU_CSI1_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4		(_MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8		(_MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA8__GPIO3_8		(_MX53_PAD_EIM_DA8__GPIO3_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1		(_MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1		(_MX53_PAD_EIM_DA8__IPU_CSI1_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3		(_MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9		(_MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA9__GPIO3_9		(_MX53_PAD_EIM_DA9__GPIO3_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0		(_MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0		(_MX53_PAD_EIM_DA9__IPU_CSI1_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2		(_MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10		(_MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA10__GPIO3_10		(_MX53_PAD_EIM_DA10__GPIO3_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15		(_MX53_PAD_EIM_DA10__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN		(_MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1		(_MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11		(_MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA11__GPIO3_11		(_MX53_PAD_EIM_DA11__GPIO3_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2		(_MX53_PAD_EIM_DA11__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC		(_MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12		(_MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA12__GPIO3_12		(_MX53_PAD_EIM_DA12__GPIO3_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3		(_MX53_PAD_EIM_DA12__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC		(_MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13		(_MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA13__GPIO3_13		(_MX53_PAD_EIM_DA13__GPIO3_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS		(_MX53_PAD_EIM_DA13__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK		(_MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14		(_MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA14__GPIO3_14		(_MX53_PAD_EIM_DA14__GPIO3_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS		(_MX53_PAD_EIM_DA14__IPU_DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK		(_MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15		(_MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA15__GPIO3_15		(_MX53_PAD_EIM_DA15__GPIO3_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1		(_MX53_PAD_EIM_DA15__IPU_DI1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4		(_MX53_PAD_EIM_DA15__IPU_DI1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B		(_MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_WE_B__GPIO6_12		(_MX53_PAD_NANDF_WE_B__GPIO6_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B		(_MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_RE_B__GPIO6_13		(_MX53_PAD_NANDF_RE_B__GPIO6_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT		(_MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_WAIT__GPIO5_0		(_MX53_PAD_EIM_WAIT__GPIO5_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B		(_MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22		(_MX53_PAD_LVDS1_TX3_P__GPIO6_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		(_MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24		(_MX53_PAD_LVDS1_TX2_P__GPIO6_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		(_MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26		(_MX53_PAD_LVDS1_CLK_P__GPIO6_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		(_MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28		(_MX53_PAD_LVDS1_TX1_P__GPIO6_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		(_MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30		(_MX53_PAD_LVDS1_TX0_P__GPIO6_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		(_MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22		(_MX53_PAD_LVDS0_TX3_P__GPIO7_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		(_MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24		(_MX53_PAD_LVDS0_CLK_P__GPIO7_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		(_MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26		(_MX53_PAD_LVDS0_TX2_P__GPIO7_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		(_MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28		(_MX53_PAD_LVDS0_TX1_P__GPIO7_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		(_MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30		(_MX53_PAD_LVDS0_TX0_P__GPIO7_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		(_MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_10__GPIO4_0		(_MX53_PAD_GPIO_10__GPIO4_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT		(_MX53_PAD_GPIO_10__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_11__GPIO4_1		(_MX53_PAD_GPIO_11__GPIO4_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_12__GPIO4_2		(_MX53_PAD_GPIO_12__GPIO4_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_13__GPIO4_3		(_MX53_PAD_GPIO_13__GPIO4_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_14__GPIO4_4		(_MX53_PAD_GPIO_14__GPIO4_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE		(_MX53_PAD_NANDF_CLE__EMI_NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CLE__GPIO6_7		(_MX53_PAD_NANDF_CLE__GPIO6_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0		(_MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE		(_MX53_PAD_NANDF_ALE__EMI_NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_ALE__GPIO6_8		(_MX53_PAD_NANDF_ALE__GPIO6_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1		(_MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B		(_MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_WP_B__GPIO6_9		(_MX53_PAD_NANDF_WP_B__GPIO6_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2		(_MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0		(_MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_RB0__GPIO6_10		(_MX53_PAD_NANDF_RB0__GPIO6_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3		(_MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0		(_MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS0__GPIO6_11		(_MX53_PAD_NANDF_CS0__GPIO6_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4		(_MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1		(_MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS1__GPIO6_14		(_MX53_PAD_NANDF_CS1__GPIO6_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK		(_MX53_PAD_NANDF_CS1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5		(_MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2		(_MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__GPIO6_15		(_MX53_PAD_NANDF_CS2__GPIO6_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0		(_MX53_PAD_NANDF_CS2__IPU_SISG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0		(_MX53_PAD_NANDF_CS2__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE		(_MX53_PAD_NANDF_CS2__EMI_WEIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK		(_MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG		(_MX53_PAD_NANDF_CS2__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6		(_MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3		(_MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__GPIO6_16		(_MX53_PAD_NANDF_CS3__GPIO6_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1		(_MX53_PAD_NANDF_CS3__IPU_SISG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1		(_MX53_PAD_NANDF_CS3__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26		(_MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT		(_MX53_PAD_NANDF_CS3__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7		(_MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__FEC_MDIO		(_MX53_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__GPIO1_22		(_MX53_PAD_FEC_MDIO__GPIO1_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR		(_MX53_PAD_FEC_MDIO__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__FEC_COL		(_MX53_PAD_FEC_MDIO__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2		(_MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		(_MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49		(_MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK		(_MX53_PAD_FEC_REF_CLK__FEC_TX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23		(_MX53_PAD_FEC_REF_CLK__GPIO1_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR		(_MX53_PAD_FEC_REF_CLK__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		(_MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50		(_MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER		(_MX53_PAD_FEC_RX_ER__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RX_ER__GPIO1_24		(_MX53_PAD_FEC_RX_ER__GPIO1_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR		(_MX53_PAD_FEC_RX_ER__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK		(_MX53_PAD_FEC_RX_ER__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3		(_MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV		(_MX53_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25		(_MX53_PAD_FEC_CRS_DV__GPIO1_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT		(_MX53_PAD_FEC_CRS_DV__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1		(_MX53_PAD_FEC_RXD1__FEC_RDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD1__GPIO1_26		(_MX53_PAD_FEC_RXD1__GPIO1_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD1__ESAI1_FST		(_MX53_PAD_FEC_RXD1__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG		(_MX53_PAD_FEC_RXD1__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1		(_MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0		(_MX53_PAD_FEC_RXD0__FEC_RDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD0__GPIO1_27		(_MX53_PAD_FEC_RXD0__GPIO1_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT		(_MX53_PAD_FEC_RXD0__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT		(_MX53_PAD_FEC_RXD0__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN		(_MX53_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TX_EN__GPIO1_28		(_MX53_PAD_FEC_TX_EN__GPIO1_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2		(_MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1		(_MX53_PAD_FEC_TXD1__FEC_TDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD1__GPIO1_29		(_MX53_PAD_FEC_TXD1__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3		(_MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK		(_MX53_PAD_FEC_TXD1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK		(_MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0		(_MX53_PAD_FEC_TXD0__FEC_TDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD0__GPIO1_30		(_MX53_PAD_FEC_TXD0__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1		(_MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0		(_MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__FEC_MDC		(_MX53_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__GPIO1_31		(_MX53_PAD_FEC_MDC__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0		(_MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT		(_MX53_PAD_FEC_MDC__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		(_MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1		(_MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOW__PATA_DIOW		(_MX53_PAD_PATA_DIOW__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOW__GPIO6_17		(_MX53_PAD_PATA_DIOW__GPIO6_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX		(_MX53_PAD_PATA_DIOW__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2		(_MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMACK__PATA_DMACK		(_MX53_PAD_PATA_DMACK__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMACK__GPIO6_18		(_MX53_PAD_PATA_DMACK__GPIO6_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX		(_MX53_PAD_PATA_DMACK__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3		(_MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ		(_MX53_PAD_PATA_DMARQ__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMARQ__GPIO7_0		(_MX53_PAD_PATA_DMARQ__GPIO7_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX		(_MX53_PAD_PATA_DMARQ__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0		(_MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4		(_MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN		(_MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1		(_MX53_PAD_PATA_BUFFER_EN__GPIO7_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX		(_MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1		(_MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		(_MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ		(_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__GPIO7_2		(_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__UART2_CTS		(_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN		(_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2		(_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6		(_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOR__PATA_DIOR		(_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOR__GPIO7_3		(_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOR__UART2_RTS		(_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN		(_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7		(_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		(_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__GPIO7_4		(_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD		(_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__UART1_CTS		(_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN		(_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		(_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__PATA_IORDY		(_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__GPIO7_5		(_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK		(_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__UART1_RTS		(_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN		(_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1		(_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_0__PATA_DA_0		(_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_0__GPIO7_6		(_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST		(_MX53_PAD_PATA_DA_0__ESDHC3_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE		(_MX53_PAD_PATA_DA_0__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2		(_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_1__PATA_DA_1		(_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_1__GPIO7_7		(_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD		(_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DA_1__UART3_CTS		(_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3		(_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_2__PATA_DA_2		(_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_2__GPIO7_8		(_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK		(_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DA_2__UART3_RTS		(_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4		(_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_0__PATA_CS_0		(_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_0__GPIO7_9		(_MX53_PAD_PATA_CS_0__GPIO7_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX		(_MX53_PAD_PATA_CS_0__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5		(_MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_1__PATA_CS_1		(_MX53_PAD_PATA_CS_1__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_1__GPIO7_10		(_MX53_PAD_PATA_CS_1__GPIO7_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX		(_MX53_PAD_PATA_CS_1__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6		(_MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0		(_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__GPIO2_0		(_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0		(_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4		(_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		(_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0		(_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7		(_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1		(_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__GPIO2_1		(_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1		(_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5		(_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		(_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1		(_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2		(_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__GPIO2_2		(_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2		(_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6		(_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		(_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2		(_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3		(_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__GPIO2_3		(_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3		(_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7		(_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		(_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3		(_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4		(_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__GPIO2_4		(_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4		(_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4		(_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		(_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4		(_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5		(_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__GPIO2_5		(_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5		(_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5		(_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		(_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5		(_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6		(_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__GPIO2_6		(_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6		(_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6		(_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		(_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6		(_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7		(_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__GPIO2_7		(_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7		(_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7		(_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		(_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7		(_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8		(_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__GPIO2_8		(_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4		(_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8		(_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0		(_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		(_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8		(_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9		(_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__GPIO2_9		(_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5		(_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9		(_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1		(_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		(_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9		(_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10		(_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__GPIO2_10		(_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6		(_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10		(_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2		(_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		(_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10		(_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11		(_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__GPIO2_11		(_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7		(_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11		(_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3		(_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		(_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11		(_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12		(_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__GPIO2_12		(_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4		(_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12		(_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0		(_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		(_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12		(_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13		(_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__GPIO2_13		(_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5		(_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13		(_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1		(_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		(_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13		(_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14		(_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__GPIO2_14		(_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6		(_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14		(_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2		(_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		(_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14		(_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15		(_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__GPIO2_15		(_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7		(_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15		(_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3		(_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		(_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15		(_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0		(_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_DATA0__GPIO1_16		(_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1		(_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA0__CSPI_MISO		(_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP		(_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1		(_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_DATA1__GPIO1_17		(_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2		(_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA1__CSPI_SS0		(_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP		(_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD		(_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_CMD__GPIO1_18		(_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1		(_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CMD__CSPI_MOSI		(_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP		(_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2		(_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__GPIO1_19		(_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2		(_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO		(_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B		(_MX53_PAD_SD1_DATA2__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__CSPI_SS1		(_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		(_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP		(_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK		(_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__GPIO1_20		(_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT		(_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__GPT_CLKIN		(_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__CSPI_SCLK		(_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0		(_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3		(_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__GPIO1_21		(_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3		(_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO		(_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B		(_MX53_PAD_SD1_DATA3__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__CSPI_SS2		(_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		(_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1		(_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK		(_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__GPIO1_10		(_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__KPP_COL_5		(_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		(_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__CSPI_SCLK		(_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V		(_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD		(_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__GPIO1_11		(_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__KPP_ROW_5		(_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC		(_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__CSPI_MOSI		(_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_CMD__SCC_RANDOM		(_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3		(_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__GPIO1_12		(_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__KPP_COL_6		(_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC		(_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__CSPI_SS2		(_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA3__SJC_DONE		(_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2		(_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__GPIO1_13		(_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6		(_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD		(_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__CSPI_SS1		(_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA2__SJC_FAIL		(_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1		(_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__GPIO1_14		(_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__KPP_COL_7		(_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS		(_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__CSPI_SS0		(_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO		(_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0		(_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__GPIO1_15		(_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7		(_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD		(_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__CSPI_MISO		(_MX53_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT		(_MX53_PAD_SD2_DATA0__RTIC_DONE_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__CCM_CLKO		(_MX53_PAD_GPIO_0__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__GPIO1_0		(_MX53_PAD_GPIO_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__KPP_COL_5		(_MX53_PAD_GPIO_0__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK		(_MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__EPIT1_EPITO		(_MX53_PAD_GPIO_0__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB		(_MX53_PAD_GPIO_0__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR		(_MX53_PAD_GPIO_0__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_0__CSU_TD		(_MX53_PAD_GPIO_0__CSU_TD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__ESAI1_SCKR		(_MX53_PAD_GPIO_1__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__GPIO1_1		(_MX53_PAD_GPIO_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__KPP_ROW_5		(_MX53_PAD_GPIO_1__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK		(_MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__PWM2_PWMO		(_MX53_PAD_GPIO_1__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B		(_MX53_PAD_GPIO_1__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__ESDHC1_CD		(_MX53_PAD_GPIO_1__ESDHC1_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK		(_MX53_PAD_GPIO_1__SRC_TESTER_ACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__ESAI1_FSR		(_MX53_PAD_GPIO_9__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__GPIO1_9		(_MX53_PAD_GPIO_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__KPP_COL_6		(_MX53_PAD_GPIO_9__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B		(_MX53_PAD_GPIO_9__CCM_REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__PWM1_PWMO		(_MX53_PAD_GPIO_9__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B		(_MX53_PAD_GPIO_9__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__ESDHC1_WP		(_MX53_PAD_GPIO_9__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE		(_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__ESAI1_HCKR		(_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__GPIO1_3		(_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__I2C3_SCL		(_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN		(_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__CCM_CLKO2		(_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		(_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC		(_MX53_PAD_GPIO_3__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__MLB_MLBCLK		(_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__ESAI1_SCKT		(_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__GPIO1_6		(_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__I2C3_SDA		(_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0		(_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB		(_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		(_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL		(_MX53_PAD_GPIO_6__ESDHC2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__MLB_MLBSIG		(_MX53_PAD_GPIO_6__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__ESAI1_FST		(_MX53_PAD_GPIO_2__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__GPIO1_2		(_MX53_PAD_GPIO_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__KPP_ROW_6		(_MX53_PAD_GPIO_2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1		(_MX53_PAD_GPIO_2__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		(_MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		(_MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__ESDHC2_WP		(_MX53_PAD_GPIO_2__ESDHC2_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_2__MLB_MLBDAT		(_MX53_PAD_GPIO_2__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__ESAI1_HCKT		(_MX53_PAD_GPIO_4__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__GPIO1_4		(_MX53_PAD_GPIO_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__KPP_COL_7		(_MX53_PAD_GPIO_4__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2		(_MX53_PAD_GPIO_4__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		(_MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		(_MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__ESDHC2_CD		(_MX53_PAD_GPIO_4__ESDHC2_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE		(_MX53_PAD_GPIO_4__SCC_SEC_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3		(_MX53_PAD_GPIO_5__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__GPIO1_5		(_MX53_PAD_GPIO_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__KPP_ROW_7		(_MX53_PAD_GPIO_5__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__CCM_CLKO		(_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		(_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		(_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__I2C3_SCL		(_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP		(_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1		(_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__GPIO1_7		(_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__EPIT1_EPITO		(_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__CAN1_TXCAN		(_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX		(_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__FIRI_RXD		(_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK		(_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP		(_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0		(_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__GPIO1_8		(_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__EPIT2_EPITO		(_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__CAN1_RXCAN		(_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX		(_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__FIRI_TXD		(_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK		(_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP		(_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2		(_MX53_PAD_GPIO_16__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__GPIO7_11		(_MX53_PAD_GPIO_16__GPIO7_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT		(_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1		(_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__SPDIF_IN1		(_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__I2C3_SDA		(_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__SJC_DE_B		(_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__ESAI1_TX0		(_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__GPIO7_12		(_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0		(_MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY		(_MX53_PAD_GPIO_17__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG		(_MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__SPDIF_OUT1		(_MX53_PAD_GPIO_17__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__IPU_SNOOP2		(_MX53_PAD_GPIO_17__IPU_SNOOP2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT		(_MX53_PAD_GPIO_17__SJC_JTAG_ACT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__ESAI1_TX1		(_MX53_PAD_GPIO_18__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__GPIO7_13		(_MX53_PAD_GPIO_18__GPIO7_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1		(_MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__OWIRE_LINE		(_MX53_PAD_GPIO_18__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		(_MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK		(_MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL		(_MX53_PAD_GPIO_18__ESDHC1_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST		(_MX53_PAD_GPIO_18__SRC_SYSTEM_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
 
 #endif	/* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 15d5951..bf28df0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -46,12 +46,12 @@
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
  */
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label);
 
 /*
@@ -60,12 +60,12 @@
  * 	- frees the GPIO if the pin was configured as GPIO
  * 	- DOES NOT reconfigure the IOMUX in its reset state
  */
-void mxc_iomux_release_pin(const unsigned int pin_mode);
+void mxc_iomux_release_pin(unsigned int pin_mode);
 /*
  * releases multiple pins
  * convenvient way to call the above function with tables
  */
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
 
 #define MUX_SIDE_AP		(0)
 #define MUX_SIDE_SP		(1)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
index 884f575..c07d302 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -100,4 +100,6 @@
 		const char *label);
 extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
+extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
+
 #endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ba65c92..a3d930d3 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -23,17 +23,17 @@
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
 /* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_ARCH_MX53
+#if defined CONFIG_SOC_IMX53
 #define MXC_GPIO_IRQS		(32 * 7)
 #elif defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX50
+#elif defined CONFIG_SOC_IMX50
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX1
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX51
+#elif defined CONFIG_SOC_IMX51
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 75d9621..97b19e7 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -54,13 +54,13 @@
 #define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
 #define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
 #define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_SPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
 #define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
 #define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
 #define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
 #define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
 #define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_SPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
 #define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
 #define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
 #define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
@@ -89,7 +89,7 @@
 #define MX1_GPIO_INT_PORTA	11
 #define MX1_GPIO_INT_PORTB	12
 #define MX1_GPIO_INT_PORTC	13
-#define MX1_LCDC_INT		14
+#define MX1_INT_LCDC		14
 #define MX1_SIM_INT		15
 #define MX1_SIM_DATA_INT	16
 #define MX1_RTC_INT		17
@@ -112,7 +112,8 @@
 #define MX1_PWM_INT		34
 #define MX1_SDHC_INT		35
 #define MX1_INT_I2C		39
-#define MX1_CSPI_INT		41
+#define MX1_INT_CSPI2		40
+#define MX1_INT_CSPI1		41
 #define MX1_SSI_TX_INT		42
 #define MX1_SSI_TX_ERR_INT	43
 #define MX1_SSI_RX_INT		44
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index d7a8e52..ace1786 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -79,7 +79,7 @@
 #define MX53_GPIO3_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0008C000)
 #define MX53_GPIO4_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00090000)
 #define MX53_KPP_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00094000)
-#define MX53_WDOG_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00098000)
+#define MX53_WDOG1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00098000)
 #define MX53_WDOG2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0009C000)
 #define MX53_GPT1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A0000)
 #define MX53_SRTC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A4000)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 04c7a26..7e07263 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -103,7 +103,7 @@
 # define cpu_is_mx27()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -115,7 +115,7 @@
 # define cpu_is_mx31()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -127,7 +127,7 @@
 # define cpu_is_mx35()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX50
+#ifdef CONFIG_SOC_IMX50
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -139,7 +139,7 @@
 # define cpu_is_mx50()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -151,7 +151,7 @@
 # define cpu_is_mx51()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX53
+#ifdef CONFIG_SOC_IMX53
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index a523a40..2c159dc 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -44,11 +44,14 @@
 	int (*exit)(struct platform_device *pdev);
 
 	unsigned int		 portsc;
-	unsigned int		 flags;
 	struct otg_transceiver	*otg;
 };
 
-int mxc_initialize_usb_hw(int port, unsigned int flags);
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
 
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
index 96b6ab4..f9161c9 100644
--- a/arch/arm/plat-mxc/include/mach/ulpi.h
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -1,6 +1,15 @@
 #ifndef __MACH_ULPI_H
 #define __MACH_ULPI_H
 
+#ifdef CONFIG_USB_ULPI
+struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags);
+#else
+static inline struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+{
+	return NULL;
+}
+#endif
+
 extern struct otg_io_access_ops mxc_ulpi_access_ops;
 
 #endif /* __MACH_ULPI_H */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index ff469c4..4864b0a 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -62,6 +62,7 @@
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 #define MX3X_UART2_BASE_ADDR	0x43F94000
+#define MX3X_UART5_BASE_ADDR	0x43FB4000
 #define MX51_UART1_BASE_ADDR	0x73fbc000
 #define MX50_UART1_BASE_ADDR	0x53fbc000
 #define MX53_UART1_BASE_ADDR	0x53fbc000
@@ -83,6 +84,7 @@
 	case MACH_TYPE_MX21ADS:
 	case MACH_TYPE_PCA100:
 	case MACH_TYPE_MXT_TD60:
+	case MACH_TYPE_IMX27IPCAM:
 		uart_base = MX2X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX31LITE:
@@ -101,6 +103,9 @@
 	case MACH_TYPE_MAGX_ZN5:
 		uart_base = MX3X_UART2_BASE_ADDR;
 		break;
+	case MACH_TYPE_BUG:
+		uart_base = MX3X_UART5_BASE_ADDR;
+		break;
 	case MACH_TYPE_MX51_BABBAGE:
 	case MACH_TYPE_EUKREA_CPUIMX51SD:
 	case MACH_TYPE_MX51_3DS:
@@ -110,6 +115,8 @@
 		uart_base = MX50_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX53_EVK:
+	case MACH_TYPE_MX53_LOCO:
+	case MACH_TYPE_MX53_SMD:
 		uart_base = MX53_UART1_BASE_ADDR;
 		break;
 	default:
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
index 960a02c..3238c10 100644
--- a/arch/arm/plat-mxc/iomux-v1.c
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -211,28 +211,10 @@
 }
 EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
 
-static int imx_iomuxv1_init(void)
+int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
-#ifdef CONFIG_ARCH_MX1
-	if (cpu_is_mx1()) {
-		imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
-	} else
-#endif
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21()) {
-		imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
-	} else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27()) {
-		imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
-		imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
-	} else
-#endif
-		return -ENODEV;
+	imx_iomuxv1_baseaddr = base;
+	imx_iomuxv1_numports = numports;
 
 	return 0;
 }
-pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
index 582c6df..477e45b 100644
--- a/arch/arm/plat-mxc/ulpi.c
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 
 #include <mach/ulpi.h>
 
@@ -111,3 +112,7 @@
 };
 EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
 
+struct otg_transceiver *imx_otg_ulpi_create(unsigned int flags)
+{
+	return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
+}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 5f35223..078894b 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -17,55 +17,123 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-static DEFINE_SPINLOCK(gpio_lock);
-static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
-static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
+/*
+ * GPIO unit register offsets.
+ */
+#define GPIO_OUT_OFF		0x0000
+#define GPIO_IO_CONF_OFF	0x0004
+#define GPIO_BLINK_EN_OFF	0x0008
+#define GPIO_IN_POL_OFF		0x000c
+#define GPIO_DATA_IN_OFF	0x0010
+#define GPIO_EDGE_CAUSE_OFF	0x0014
+#define GPIO_EDGE_MASK_OFF	0x0018
+#define GPIO_LEVEL_MASK_OFF	0x001c
 
-static inline void __set_direction(unsigned pin, int input)
+struct orion_gpio_chip {
+	struct gpio_chip	chip;
+	spinlock_t		lock;
+	void __iomem		*base;
+	unsigned long		valid_input;
+	unsigned long		valid_output;
+	int			mask_offset;
+	int			secondary_irq_base;
+};
+
+static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_OUT_OFF;
+}
+
+static void __iomem *GPIO_IO_CONF(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_IO_CONF_OFF;
+}
+
+static void __iomem *GPIO_BLINK_EN(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_BLINK_EN_OFF;
+}
+
+static void __iomem *GPIO_IN_POL(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_IN_POL_OFF;
+}
+
+static void __iomem *GPIO_DATA_IN(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_DATA_IN_OFF;
+}
+
+static void __iomem *GPIO_EDGE_CAUSE(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + GPIO_EDGE_CAUSE_OFF;
+}
+
+static void __iomem *GPIO_EDGE_MASK(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + ochip->mask_offset + GPIO_EDGE_MASK_OFF;
+}
+
+static void __iomem *GPIO_LEVEL_MASK(struct orion_gpio_chip *ochip)
+{
+	return ochip->base + ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
+}
+
+
+static struct orion_gpio_chip orion_gpio_chips[2];
+static int orion_gpio_chip_count;
+
+static inline void
+__set_direction(struct orion_gpio_chip *ochip, unsigned pin, int input)
 {
 	u32 u;
 
-	u = readl(GPIO_IO_CONF(pin));
+	u = readl(GPIO_IO_CONF(ochip));
 	if (input)
-		u |= 1 << (pin & 31);
+		u |= 1 << pin;
 	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_IO_CONF(pin));
+		u &= ~(1 << pin);
+	writel(u, GPIO_IO_CONF(ochip));
 }
 
-static void __set_level(unsigned pin, int high)
+static void __set_level(struct orion_gpio_chip *ochip, unsigned pin, int high)
 {
 	u32 u;
 
-	u = readl(GPIO_OUT(pin));
+	u = readl(GPIO_OUT(ochip));
 	if (high)
-		u |= 1 << (pin & 31);
+		u |= 1 << pin;
 	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_OUT(pin));
+		u &= ~(1 << pin);
+	writel(u, GPIO_OUT(ochip));
 }
 
-static inline void __set_blinking(unsigned pin, int blink)
+static inline void
+__set_blinking(struct orion_gpio_chip *ochip, unsigned pin, int blink)
 {
 	u32 u;
 
-	u = readl(GPIO_BLINK_EN(pin));
+	u = readl(GPIO_BLINK_EN(ochip));
 	if (blink)
-		u |= 1 << (pin & 31);
+		u |= 1 << pin;
 	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+		u &= ~(1 << pin);
+	writel(u, GPIO_BLINK_EN(ochip));
 }
 
-static inline int orion_gpio_is_valid(unsigned pin, int mode)
+static inline int
+orion_gpio_is_valid(struct orion_gpio_chip *ochip, unsigned pin, int mode)
 {
-	if (pin < GPIO_MAX) {
-		if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
-			goto err_out;
-		if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
-			goto err_out;
-		return true;
-	}
+	if (pin >= ochip->chip.ngpio)
+		goto err_out;
+
+	if ((mode & GPIO_INPUT_OK) && !test_bit(pin, &ochip->valid_input))
+		goto err_out;
+
+	if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, &ochip->valid_output))
+		goto err_out;
+
+	return 1;
 
 err_out:
 	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
@@ -75,134 +143,155 @@
 /*
  * GENERIC_GPIO primitives.
  */
-static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
-{
-	unsigned long flags;
-
-	if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/* Configure GPIO direction. */
-	__set_direction(pin, 1);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return 0;
-}
-
-static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
-{
-	int val;
-
-	if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)))
-		val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin));
-	else
-		val = readl(GPIO_OUT(pin));
-
-	return (val >> (pin & 31)) & 1;
-}
-
-static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
-	int value)
-{
-	unsigned long flags;
-
-	if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/* Disable blinking. */
-	__set_blinking(pin, 0);
-
-	/* Configure GPIO output value. */
-	__set_level(pin, value);
-
-	/* Configure GPIO direction. */
-	__set_direction(pin, 0);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return 0;
-}
-
-static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
-	int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/* Configure GPIO output value. */
-	__set_level(pin, value);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
 static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
-	    orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+
+	if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) ||
+	    orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
 		return 0;
+
 	return -EINVAL;
 }
 
-static struct gpio_chip orion_gpiochip = {
-	.label			= "orion_gpio",
-	.direction_input	= orion_gpio_direction_input,
-	.get			= orion_gpio_get_value,
-	.direction_output	= orion_gpio_direction_output,
-	.set			= orion_gpio_set_value,
-	.request		= orion_gpio_request,
-	.base			= 0,
-	.ngpio			= GPIO_MAX,
-	.can_sleep		= 0,
-};
-
-void __init orion_gpio_init(void)
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
-	gpiochip_add(&orion_gpiochip);
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	unsigned long flags;
+
+	if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ochip->lock, flags);
+	__set_direction(ochip, pin, 1);
+	spin_unlock_irqrestore(&ochip->lock, flags);
+
+	return 0;
 }
 
+static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	int val;
+
+	if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) {
+		val = readl(GPIO_DATA_IN(ochip)) ^ readl(GPIO_IN_POL(ochip));
+	} else {
+		val = readl(GPIO_OUT(ochip));
+	}
+
+	return (val >> pin) & 1;
+}
+
+static int
+orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	unsigned long flags;
+
+	if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ochip->lock, flags);
+	__set_blinking(ochip, pin, 0);
+	__set_level(ochip, pin, value);
+	__set_direction(ochip, pin, 0);
+	spin_unlock_irqrestore(&ochip->lock, flags);
+
+	return 0;
+}
+
+static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ochip->lock, flags);
+	__set_level(ochip, pin, value);
+	spin_unlock_irqrestore(&ochip->lock, flags);
+}
+
+static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+
+	return ochip->secondary_irq_base + pin;
+}
+
+
 /*
  * Orion-specific GPIO API extensions.
  */
+static struct orion_gpio_chip *orion_gpio_chip_find(int pin)
+{
+	int i;
+
+	for (i = 0; i < orion_gpio_chip_count; i++) {
+		struct orion_gpio_chip *ochip = orion_gpio_chips + i;
+		struct gpio_chip *chip = &ochip->chip;
+
+		if (pin >= chip->base && pin < chip->base + chip->ngpio)
+			return ochip;
+	}
+
+	return NULL;
+}
+
 void __init orion_gpio_set_unused(unsigned pin)
 {
+	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
+
+	if (ochip == NULL)
+		return;
+
+	pin -= ochip->chip.base;
+
 	/* Configure as output, drive low. */
-	__set_level(pin, 0);
-	__set_direction(pin, 0);
+	__set_level(ochip, pin, 0);
+	__set_direction(ochip, pin, 0);
 }
 
 void __init orion_gpio_set_valid(unsigned pin, int mode)
 {
+	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
+
+	if (ochip == NULL)
+		return;
+
+	pin -= ochip->chip.base;
+
 	if (mode == 1)
 		mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+
 	if (mode & GPIO_INPUT_OK)
-		__set_bit(pin, gpio_valid_input);
+		__set_bit(pin, &ochip->valid_input);
 	else
-		__clear_bit(pin, gpio_valid_input);
+		__clear_bit(pin, &ochip->valid_input);
+
 	if (mode & GPIO_OUTPUT_OK)
-		__set_bit(pin, gpio_valid_output);
+		__set_bit(pin, &ochip->valid_output);
 	else
-		__clear_bit(pin, gpio_valid_output);
+		__clear_bit(pin, &ochip->valid_output);
 }
 
 void orion_gpio_set_blink(unsigned pin, int blink)
 {
+	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
+	if (ochip == NULL)
+		return;
 
-	/* Set output value to zero. */
-	__set_level(pin, 0);
-
-	/* Set blinking. */
-	__set_blinking(pin, blink);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&ochip->lock, flags);
+	__set_level(ochip, pin, 0);
+	__set_blinking(ochip, pin, blink);
+	spin_unlock_irqrestore(&ochip->lock, flags);
 }
 EXPORT_SYMBOL(orion_gpio_set_blink);
 
@@ -234,59 +323,78 @@
  ****************************************************************************/
 static void gpio_irq_ack(struct irq_data *d)
 {
-	int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
+	struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
+	int type;
+
+	type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-		int pin = irq_to_gpio(d->irq);
-		writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+		int pin = d->irq - ochip->secondary_irq_base;
+
+		writel(~(1 << pin), GPIO_EDGE_CAUSE(ochip));
 	}
 }
 
 static void gpio_irq_mask(struct irq_data *d)
 {
-	int pin = irq_to_gpio(d->irq);
-	int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
-	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
-		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
-	u32 u = readl(reg);
-	u &= ~(1 << (pin & 31));
-	writel(u, reg);
+	struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
+	int type;
+	void __iomem *reg;
+	int pin;
+
+	type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		reg = GPIO_EDGE_MASK(ochip);
+	else
+		reg = GPIO_LEVEL_MASK(ochip);
+
+	pin = d->irq - ochip->secondary_irq_base;
+
+	writel(readl(reg) & ~(1 << pin), reg);
 }
 
 static void gpio_irq_unmask(struct irq_data *d)
 {
-	int pin = irq_to_gpio(d->irq);
-	int type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
-	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
-		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
-	u32 u = readl(reg);
-	u |= 1 << (pin & 31);
-	writel(u, reg);
+	struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
+	int type;
+	void __iomem *reg;
+	int pin;
+
+	type = irq_desc[d->irq].status & IRQ_TYPE_SENSE_MASK;
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		reg = GPIO_EDGE_MASK(ochip);
+	else
+		reg = GPIO_LEVEL_MASK(ochip);
+
+	pin = d->irq - ochip->secondary_irq_base;
+
+	writel(readl(reg) | (1 << pin), reg);
 }
 
 static int gpio_irq_set_type(struct irq_data *d, u32 type)
 {
-	int pin = irq_to_gpio(d->irq);
-	struct irq_desc *desc;
+	struct orion_gpio_chip *ochip = irq_data_get_irq_chip_data(d);
+	int pin;
 	u32 u;
 
-	u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31));
+	pin = d->irq - ochip->secondary_irq_base;
+
+	u = readl(GPIO_IO_CONF(ochip)) & (1 << pin);
 	if (!u) {
 		printk(KERN_ERR "orion gpio_irq_set_type failed "
 				"(irq %d, pin %d).\n", d->irq, pin);
 		return -EINVAL;
 	}
 
-	desc = irq_desc + d->irq;
-
 	/*
 	 * Set edge/level type.
 	 */
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-		desc->handle_irq = handle_edge_irq;
+		set_irq_handler(d->irq, handle_edge_irq);
 	} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-		desc->handle_irq = handle_level_irq;
+		set_irq_handler(d->irq, handle_level_irq);
 	} else {
-		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", d->irq, type);
+		printk(KERN_ERR "failed to set irq=%d (type=%d)\n",
+		       d->irq, type);
 		return -EINVAL;
 	}
 
@@ -294,31 +402,29 @@
 	 * Configure interrupt polarity.
 	 */
 	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) {
-		u = readl(GPIO_IN_POL(pin));
-		u &= ~(1 << (pin & 31));
-		writel(u, GPIO_IN_POL(pin));
+		u = readl(GPIO_IN_POL(ochip));
+		u &= ~(1 << pin);
+		writel(u, GPIO_IN_POL(ochip));
 	} else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) {
-		u = readl(GPIO_IN_POL(pin));
-		u |= 1 << (pin & 31);
-		writel(u, GPIO_IN_POL(pin));
+		u = readl(GPIO_IN_POL(ochip));
+		u |= 1 << pin;
+		writel(u, GPIO_IN_POL(ochip));
 	} else if (type == IRQ_TYPE_EDGE_BOTH) {
 		u32 v;
 
-		v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin));
+		v = readl(GPIO_IN_POL(ochip)) ^ readl(GPIO_DATA_IN(ochip));
 
 		/*
 		 * set initial polarity based on current input level
 		 */
-		u = readl(GPIO_IN_POL(pin));
-		if (v & (1 << (pin & 31)))
-			u |= 1 << (pin & 31);		/* falling */
+		u = readl(GPIO_IN_POL(ochip));
+		if (v & (1 << pin))
+			u |= 1 << pin;		/* falling */
 		else
-			u &= ~(1 << (pin & 31));	/* rising */
-		writel(u, GPIO_IN_POL(pin));
+			u &= ~(1 << pin);	/* rising */
+		writel(u, GPIO_IN_POL(ochip));
 	}
 
-	desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type;
-
 	return 0;
 }
 
@@ -330,29 +436,87 @@
 	.irq_set_type	= gpio_irq_set_type,
 };
 
+void __init orion_gpio_init(int gpio_base, int ngpio,
+			    u32 base, int mask_offset, int secondary_irq_base)
+{
+	struct orion_gpio_chip *ochip;
+	int i;
+
+	if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
+		return;
+
+	ochip = orion_gpio_chips + orion_gpio_chip_count;
+	ochip->chip.label = "orion_gpio";
+	ochip->chip.request = orion_gpio_request;
+	ochip->chip.direction_input = orion_gpio_direction_input;
+	ochip->chip.get = orion_gpio_get;
+	ochip->chip.direction_output = orion_gpio_direction_output;
+	ochip->chip.set = orion_gpio_set;
+	ochip->chip.to_irq = orion_gpio_to_irq;
+	ochip->chip.base = gpio_base;
+	ochip->chip.ngpio = ngpio;
+	ochip->chip.can_sleep = 0;
+	spin_lock_init(&ochip->lock);
+	ochip->base = (void __iomem *)base;
+	ochip->valid_input = 0;
+	ochip->valid_output = 0;
+	ochip->mask_offset = mask_offset;
+	ochip->secondary_irq_base = secondary_irq_base;
+
+	gpiochip_add(&ochip->chip);
+
+	orion_gpio_chip_count++;
+
+	/*
+	 * Mask and clear GPIO interrupts.
+	 */
+	writel(0, GPIO_EDGE_CAUSE(ochip));
+	writel(0, GPIO_EDGE_MASK(ochip));
+	writel(0, GPIO_LEVEL_MASK(ochip));
+
+	for (i = 0; i < ngpio; i++) {
+		unsigned int irq = secondary_irq_base + i;
+
+		set_irq_chip(irq, &orion_gpio_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_chip_data(irq, ochip);
+		irq_desc[irq].status |= IRQ_LEVEL;
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
+
 void orion_gpio_irq_handler(int pinoff)
 {
+	struct orion_gpio_chip *ochip;
 	u32 cause;
-	int pin;
+	int i;
 
-	cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff));
-	cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff));
+	ochip = orion_gpio_chip_find(pinoff);
+	if (ochip == NULL)
+		return;
 
-	for (pin = pinoff; pin < pinoff + 8; pin++) {
-		int irq = gpio_to_irq(pin);
-		struct irq_desc *desc = irq_desc + irq;
+	cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip));
+	cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip));
 
-		if (!(cause & (1 << (pin & 31))))
+	for (i = 0; i < ochip->chip.ngpio; i++) {
+		int irq;
+		struct irq_desc *desc;
+
+		irq = ochip->secondary_irq_base + i;
+
+		if (!(cause & (1 << i)))
 			continue;
 
+		desc = irq_desc + irq;
 		if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 			/* Swap polarity (race with GPIO line) */
 			u32 polarity;
 
-			polarity = readl(GPIO_IN_POL(pin));
-			polarity ^= 1 << (pin & 31);
-			writel(polarity, GPIO_IN_POL(pin));
+			polarity = readl(GPIO_IN_POL(ochip));
+			polarity ^= 1 << i;
+			writel(polarity, GPIO_IN_POL(ochip));
 		}
+
 		desc_handle_irq(irq, desc);
 	}
 }
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 07c430f..5578b98 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -12,6 +12,7 @@
 #define __PLAT_GPIO_H
 
 #include <linux/init.h>
+#include <asm-generic/gpio.h>
 
 /*
  * GENERIC_GPIO primitives.
@@ -19,6 +20,7 @@
 #define gpio_get_value  __gpio_get_value
 #define gpio_set_value  __gpio_set_value
 #define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
 
 /*
  * Orion-specific GPIO API extensions.
@@ -31,7 +33,8 @@
 void orion_gpio_set_valid(unsigned pin, int mode);
 
 /* Initialize gpiolib. */
-void __init orion_gpio_init(void);
+void __init orion_gpio_init(int gpio_base, int ngpio,
+			    u32 base, int mask_offset, int secondary_irq_base);
 
 /*
  * GPIO interrupt handling.
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
index c06ca35..4d5f1f6 100644
--- a/arch/arm/plat-orion/include/plat/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -11,7 +11,10 @@
 #ifndef __PLAT_TIME_H
 #define __PLAT_TIME_H
 
-void orion_time_init(unsigned int irq, unsigned int tclk);
+void orion_time_set_base(u32 timer_base);
+
+void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
+		     unsigned int irq, unsigned int tclk);
 
 
 #endif
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index c3da247..742b032 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -18,28 +18,42 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/sched_clock.h>
-#include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
 
 /*
- * Number of timer ticks per jiffy.
+ * MBus bridge block registers.
  */
-static u32 ticks_per_jiffy;
+#define BRIDGE_CAUSE_OFF	0x0110
+#define BRIDGE_MASK_OFF		0x0114
+#define  BRIDGE_INT_TIMER0	 0x0002
+#define  BRIDGE_INT_TIMER1	 0x0004
 
 
 /*
  * Timer block registers.
  */
-#define TIMER_CTRL		(TIMER_VIRT_BASE + 0x0000)
-#define  TIMER0_EN		0x0001
-#define  TIMER0_RELOAD_EN	0x0002
-#define  TIMER1_EN		0x0004
-#define  TIMER1_RELOAD_EN	0x0008
-#define TIMER0_RELOAD		(TIMER_VIRT_BASE + 0x0010)
-#define TIMER0_VAL		(TIMER_VIRT_BASE + 0x0014)
-#define TIMER1_RELOAD		(TIMER_VIRT_BASE + 0x0018)
-#define TIMER1_VAL		(TIMER_VIRT_BASE + 0x001c)
+#define TIMER_CTRL_OFF		0x0000
+#define  TIMER0_EN		 0x0001
+#define  TIMER0_RELOAD_EN	 0x0002
+#define  TIMER1_EN		 0x0004
+#define  TIMER1_RELOAD_EN	 0x0008
+#define TIMER0_RELOAD_OFF	0x0010
+#define TIMER0_VAL_OFF		0x0014
+#define TIMER1_RELOAD_OFF	0x0018
+#define TIMER1_VAL_OFF		0x001c
+
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *bridge_base;
+static u32 bridge_timer1_clr_mask;
+static void __iomem *timer_base;
+
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
 
 
 /*
@@ -50,14 +64,14 @@
 
 unsigned long long notrace sched_clock(void)
 {
-	u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+	u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
 	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
 }
 
 
 static void notrace orion_update_sched_clock(void)
 {
-	u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+	u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
 	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
@@ -71,7 +85,7 @@
  */
 static cycle_t orion_clksrc_read(struct clocksource *cs)
 {
-	return 0xffffffff - readl(TIMER0_VAL);
+	return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
 }
 
 static struct clocksource orion_clksrc = {
@@ -101,23 +115,23 @@
 	/*
 	 * Clear and enable clockevent timer interrupt.
 	 */
-	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
 
-	u = readl(BRIDGE_MASK);
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
 	u |= BRIDGE_INT_TIMER1;
-	writel(u, BRIDGE_MASK);
+	writel(u, bridge_base + BRIDGE_MASK_OFF);
 
 	/*
 	 * Setup new clockevent timer value.
 	 */
-	writel(delta, TIMER1_VAL);
+	writel(delta, timer_base + TIMER1_VAL_OFF);
 
 	/*
 	 * Enable the timer.
 	 */
-	u = readl(TIMER_CTRL);
+	u = readl(timer_base + TIMER_CTRL_OFF);
 	u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
-	writel(u, TIMER_CTRL);
+	writel(u, timer_base + TIMER_CTRL_OFF);
 
 	local_irq_restore(flags);
 
@@ -135,37 +149,38 @@
 		/*
 		 * Setup timer to fire at 1/HZ intervals.
 		 */
-		writel(ticks_per_jiffy - 1, TIMER1_RELOAD);
-		writel(ticks_per_jiffy - 1, TIMER1_VAL);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
 
 		/*
 		 * Enable timer interrupt.
 		 */
-		u = readl(BRIDGE_MASK);
-		writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK);
+		u = readl(bridge_base + BRIDGE_MASK_OFF);
+		writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
 
 		/*
 		 * Enable timer.
 		 */
-		u = readl(TIMER_CTRL);
-		writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL);
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u | TIMER1_EN | TIMER1_RELOAD_EN,
+		       timer_base + TIMER_CTRL_OFF);
 	} else {
 		/*
 		 * Disable timer.
 		 */
-		u = readl(TIMER_CTRL);
-		writel(u & ~TIMER1_EN, TIMER_CTRL);
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
 
 		/*
 		 * Disable timer interrupt.
 		 */
-		u = readl(BRIDGE_MASK);
-		writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK);
+		u = readl(bridge_base + BRIDGE_MASK_OFF);
+		writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
 
 		/*
 		 * ACK pending timer interrupt.
 		 */
-		writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+		writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
 
 	}
 	local_irq_restore(flags);
@@ -185,7 +200,7 @@
 	/*
 	 * ACK timer interrupt and call event handler.
 	 */
-	writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
 	orion_clkevt.event_handler(&orion_clkevt);
 
 	return IRQ_HANDLED;
@@ -197,31 +212,45 @@
 	.handler	= orion_timer_interrupt
 };
 
-void __init orion_time_init(unsigned int irq, unsigned int tclk)
+void __init
+orion_time_set_base(u32 _timer_base)
+{
+	timer_base = (void __iomem *)_timer_base;
+}
+
+void __init
+orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+		unsigned int irq, unsigned int tclk)
 {
 	u32 u;
 
+	/*
+	 * Set SoC-specific data.
+	 */
+	bridge_base = (void __iomem *)_bridge_base;
+	bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
+
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
 	/*
-	 * Set scale and timer for sched_clock
+	 * Set scale and timer for sched_clock.
 	 */
 	setup_sched_clock(tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
-	 * disabled.)
+	 * disabled).
 	 */
-	writel(0xffffffff, TIMER0_VAL);
-	writel(0xffffffff, TIMER0_RELOAD);
-	u = readl(BRIDGE_MASK);
-	writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK);
-	u = readl(TIMER_CTRL);
-	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL);
+	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
+	writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
 	clocksource_register_hz(&orion_clksrc, tclk);
 
 	/*
-	 * Setup clockevent timer (interrupt-driven.)
+	 * Setup clockevent timer (interrupt-driven).
 	 */
 	setup_irq(irq, &orion_timer_irq);
 	orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c895922..450afc5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -476,7 +476,7 @@
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
+	depends on IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0382332..9928115 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1944,7 +1944,7 @@
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
-		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
+		IMX_HAVE_PLATFORM_FEC || SOC_IMX28
 	select PHYLIB
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bb233a9c..996cf03 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -161,13 +161,13 @@
 	def_bool y if SOC_IMX21 || SOC_IMX27
 
 config SPI_IMX_VER_0_4
-	def_bool y if ARCH_MX31
+	def_bool y if SOC_IMX31
 
 config SPI_IMX_VER_0_7
-	def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 || ARCH_MX53
+	def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
 
 config SPI_IMX_VER_2_3
-	def_bool y if ARCH_MX51 || ARCH_MX53
+	def_bool y if SOC_IMX51 || SOC_IMX53
 
 config SPI_IMX
 	tristate "Freescale i.MX SPI controllers"
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b83346..5c4b347 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1596,4 +1596,19 @@
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+config SERIAL_MXS_AUART
+	depends on ARCH_MXS
+	tristate "MXS AUART support"
+	select SERIAL_CORE
+	help
+	  This driver supports the MXS Application UART (AUART) port.
+
+config SERIAL_MXS_AUART_CONSOLE
+	bool "MXS AUART console support"
+	depends on SERIAL_MXS_AUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a MXS AUART port to be the system console.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9..c855071 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -92,3 +92,4 @@
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
new file mode 100644
index 0000000..7e02c9c
--- /dev/null
+++ b/drivers/tty/serial/mxs-auart.c
@@ -0,0 +1,798 @@
+/*
+ * Freescale STMP37XX/STMP378X Application UART driver
+ *
+ * Author: dmitry pervushin <dimka@embeddedalley.com>
+ *
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#define MXS_AUART_PORTS 5
+
+#define AUART_CTRL0			0x00000000
+#define AUART_CTRL0_SET			0x00000004
+#define AUART_CTRL0_CLR			0x00000008
+#define AUART_CTRL0_TOG			0x0000000c
+#define AUART_CTRL1			0x00000010
+#define AUART_CTRL1_SET			0x00000014
+#define AUART_CTRL1_CLR			0x00000018
+#define AUART_CTRL1_TOG			0x0000001c
+#define AUART_CTRL2			0x00000020
+#define AUART_CTRL2_SET			0x00000024
+#define AUART_CTRL2_CLR			0x00000028
+#define AUART_CTRL2_TOG			0x0000002c
+#define AUART_LINECTRL			0x00000030
+#define AUART_LINECTRL_SET		0x00000034
+#define AUART_LINECTRL_CLR		0x00000038
+#define AUART_LINECTRL_TOG		0x0000003c
+#define AUART_LINECTRL2			0x00000040
+#define AUART_LINECTRL2_SET		0x00000044
+#define AUART_LINECTRL2_CLR		0x00000048
+#define AUART_LINECTRL2_TOG		0x0000004c
+#define AUART_INTR			0x00000050
+#define AUART_INTR_SET			0x00000054
+#define AUART_INTR_CLR			0x00000058
+#define AUART_INTR_TOG			0x0000005c
+#define AUART_DATA			0x00000060
+#define AUART_STAT			0x00000070
+#define AUART_DEBUG			0x00000080
+#define AUART_VERSION			0x00000090
+#define AUART_AUTOBAUD			0x000000a0
+
+#define AUART_CTRL0_SFTRST			(1 << 31)
+#define AUART_CTRL0_CLKGATE			(1 << 30)
+
+#define AUART_CTRL2_CTSEN			(1 << 15)
+#define AUART_CTRL2_RTS				(1 << 11)
+#define AUART_CTRL2_RXE				(1 << 9)
+#define AUART_CTRL2_TXE				(1 << 8)
+#define AUART_CTRL2_UARTEN			(1 << 0)
+
+#define AUART_LINECTRL_BAUD_DIVINT_SHIFT	16
+#define AUART_LINECTRL_BAUD_DIVINT_MASK		0xffff0000
+#define AUART_LINECTRL_BAUD_DIVINT(v)		(((v) & 0xffff) << 16)
+#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT	8
+#define AUART_LINECTRL_BAUD_DIVFRAC_MASK	0x00003f00
+#define AUART_LINECTRL_BAUD_DIVFRAC(v)		(((v) & 0x3f) << 8)
+#define AUART_LINECTRL_WLEN_MASK		0x00000060
+#define AUART_LINECTRL_WLEN(v)			(((v) & 0x3) << 5)
+#define AUART_LINECTRL_FEN			(1 << 4)
+#define AUART_LINECTRL_STP2			(1 << 3)
+#define AUART_LINECTRL_EPS			(1 << 2)
+#define AUART_LINECTRL_PEN			(1 << 1)
+#define AUART_LINECTRL_BRK			(1 << 0)
+
+#define AUART_INTR_RTIEN			(1 << 22)
+#define AUART_INTR_TXIEN			(1 << 21)
+#define AUART_INTR_RXIEN			(1 << 20)
+#define AUART_INTR_CTSMIEN			(1 << 17)
+#define AUART_INTR_RTIS				(1 << 6)
+#define AUART_INTR_TXIS				(1 << 5)
+#define AUART_INTR_RXIS				(1 << 4)
+#define AUART_INTR_CTSMIS			(1 << 1)
+
+#define AUART_STAT_BUSY				(1 << 29)
+#define AUART_STAT_CTS				(1 << 28)
+#define AUART_STAT_TXFE				(1 << 27)
+#define AUART_STAT_TXFF				(1 << 25)
+#define AUART_STAT_RXFE				(1 << 24)
+#define AUART_STAT_OERR				(1 << 19)
+#define AUART_STAT_BERR				(1 << 18)
+#define AUART_STAT_PERR				(1 << 17)
+#define AUART_STAT_FERR				(1 << 16)
+
+static struct uart_driver auart_driver;
+
+struct mxs_auart_port {
+	struct uart_port port;
+
+	unsigned int flags;
+	unsigned int ctrl;
+
+	unsigned int irq;
+
+	struct clk *clk;
+	struct device *dev;
+};
+
+static void mxs_auart_stop_tx(struct uart_port *u);
+
+#define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
+
+static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
+{
+	struct circ_buf *xmit = &s->port.state->xmit;
+
+	while (!(readl(s->port.membase + AUART_STAT) &
+		 AUART_STAT_TXFF)) {
+		if (s->port.x_char) {
+			s->port.icount.tx++;
+			writel(s->port.x_char,
+				     s->port.membase + AUART_DATA);
+			s->port.x_char = 0;
+			continue;
+		}
+		if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
+			s->port.icount.tx++;
+			writel(xmit->buf[xmit->tail],
+				     s->port.membase + AUART_DATA);
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+			if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+				uart_write_wakeup(&s->port);
+		} else
+			break;
+	}
+	if (uart_circ_empty(&(s->port.state->xmit)))
+		writel(AUART_INTR_TXIEN,
+			     s->port.membase + AUART_INTR_CLR);
+	else
+		writel(AUART_INTR_TXIEN,
+			     s->port.membase + AUART_INTR_SET);
+
+	if (uart_tx_stopped(&s->port))
+		mxs_auart_stop_tx(&s->port);
+}
+
+static void mxs_auart_rx_char(struct mxs_auart_port *s)
+{
+	int flag;
+	u32 stat;
+	u8 c;
+
+	c = readl(s->port.membase + AUART_DATA);
+	stat = readl(s->port.membase + AUART_STAT);
+
+	flag = TTY_NORMAL;
+	s->port.icount.rx++;
+
+	if (stat & AUART_STAT_BERR) {
+		s->port.icount.brk++;
+		if (uart_handle_break(&s->port))
+			goto out;
+	} else if (stat & AUART_STAT_PERR) {
+		s->port.icount.parity++;
+	} else if (stat & AUART_STAT_FERR) {
+		s->port.icount.frame++;
+	}
+
+	/*
+	 * Mask off conditions which should be ingored.
+	 */
+	stat &= s->port.read_status_mask;
+
+	if (stat & AUART_STAT_BERR) {
+		flag = TTY_BREAK;
+	} else if (stat & AUART_STAT_PERR)
+		flag = TTY_PARITY;
+	else if (stat & AUART_STAT_FERR)
+		flag = TTY_FRAME;
+
+	if (stat & AUART_STAT_OERR)
+		s->port.icount.overrun++;
+
+	if (uart_handle_sysrq_char(&s->port, c))
+		goto out;
+
+	uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag);
+out:
+	writel(stat, s->port.membase + AUART_STAT);
+}
+
+static void mxs_auart_rx_chars(struct mxs_auart_port *s)
+{
+	struct tty_struct *tty = s->port.state->port.tty;
+	u32 stat = 0;
+
+	for (;;) {
+		stat = readl(s->port.membase + AUART_STAT);
+		if (stat & AUART_STAT_RXFE)
+			break;
+		mxs_auart_rx_char(s);
+	}
+
+	writel(stat, s->port.membase + AUART_STAT);
+	tty_flip_buffer_push(tty);
+}
+
+static int mxs_auart_request_port(struct uart_port *u)
+{
+	return 0;
+}
+
+static int mxs_auart_verify_port(struct uart_port *u,
+				    struct serial_struct *ser)
+{
+	if (u->type != PORT_UNKNOWN && u->type != PORT_IMX)
+		return -EINVAL;
+	return 0;
+}
+
+static void mxs_auart_config_port(struct uart_port *u, int flags)
+{
+}
+
+static const char *mxs_auart_type(struct uart_port *u)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+
+	return dev_name(s->dev);
+}
+
+static void mxs_auart_release_port(struct uart_port *u)
+{
+}
+
+static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+
+	u32 ctrl = readl(u->membase + AUART_CTRL2);
+
+	ctrl &= ~AUART_CTRL2_RTS;
+	if (mctrl & TIOCM_RTS)
+		ctrl |= AUART_CTRL2_RTS;
+	s->ctrl = mctrl;
+	writel(ctrl, u->membase + AUART_CTRL2);
+}
+
+static u32 mxs_auart_get_mctrl(struct uart_port *u)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+	u32 stat = readl(u->membase + AUART_STAT);
+	int ctrl2 = readl(u->membase + AUART_CTRL2);
+	u32 mctrl = s->ctrl;
+
+	mctrl &= ~TIOCM_CTS;
+	if (stat & AUART_STAT_CTS)
+		mctrl |= TIOCM_CTS;
+
+	if (ctrl2 & AUART_CTRL2_RTS)
+		mctrl |= TIOCM_RTS;
+
+	return mctrl;
+}
+
+static void mxs_auart_settermios(struct uart_port *u,
+				 struct ktermios *termios,
+				 struct ktermios *old)
+{
+	u32 bm, ctrl, ctrl2, div;
+	unsigned int cflag, baud;
+
+	cflag = termios->c_cflag;
+
+	ctrl = AUART_LINECTRL_FEN;
+	ctrl2 = readl(u->membase + AUART_CTRL2);
+
+	/* byte size */
+	switch (cflag & CSIZE) {
+	case CS5:
+		bm = 0;
+		break;
+	case CS6:
+		bm = 1;
+		break;
+	case CS7:
+		bm = 2;
+		break;
+	case CS8:
+		bm = 3;
+		break;
+	default:
+		return;
+	}
+
+	ctrl |= AUART_LINECTRL_WLEN(bm);
+
+	/* parity */
+	if (cflag & PARENB) {
+		ctrl |= AUART_LINECTRL_PEN;
+		if ((cflag & PARODD) == 0)
+			ctrl |= AUART_LINECTRL_EPS;
+	}
+
+	u->read_status_mask = 0;
+
+	if (termios->c_iflag & INPCK)
+		u->read_status_mask |= AUART_STAT_PERR;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		u->read_status_mask |= AUART_STAT_BERR;
+
+	/*
+	 * Characters to ignore
+	 */
+	u->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		u->ignore_status_mask |= AUART_STAT_PERR;
+	if (termios->c_iflag & IGNBRK) {
+		u->ignore_status_mask |= AUART_STAT_BERR;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			u->ignore_status_mask |= AUART_STAT_OERR;
+	}
+
+	/*
+	 * ignore all characters if CREAD is not set
+	 */
+	if (cflag & CREAD)
+		ctrl2 |= AUART_CTRL2_RXE;
+	else
+		ctrl2 &= ~AUART_CTRL2_RXE;
+
+	/* figure out the stop bits requested */
+	if (cflag & CSTOPB)
+		ctrl |= AUART_LINECTRL_STP2;
+
+	/* figure out the hardware flow control settings */
+	if (cflag & CRTSCTS)
+		ctrl2 |= AUART_CTRL2_CTSEN;
+	else
+		ctrl2 &= ~AUART_CTRL2_CTSEN;
+
+	/* set baud rate */
+	baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
+	div = u->uartclk * 32 / baud;
+	ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
+	ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
+
+	writel(ctrl, u->membase + AUART_LINECTRL);
+	writel(ctrl2, u->membase + AUART_CTRL2);
+}
+
+static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
+{
+	u32 istatus, istat;
+	struct mxs_auart_port *s = context;
+	u32 stat = readl(s->port.membase + AUART_STAT);
+
+	istatus = istat = readl(s->port.membase + AUART_INTR);
+
+	if (istat & AUART_INTR_CTSMIS) {
+		uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS);
+		writel(AUART_INTR_CTSMIS,
+				s->port.membase + AUART_INTR_CLR);
+		istat &= ~AUART_INTR_CTSMIS;
+	}
+
+	if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
+		mxs_auart_rx_chars(s);
+		istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
+	}
+
+	if (istat & AUART_INTR_TXIS) {
+		mxs_auart_tx_chars(s);
+		istat &= ~AUART_INTR_TXIS;
+	}
+
+	writel(istatus & (AUART_INTR_RTIS
+		| AUART_INTR_TXIS
+		| AUART_INTR_RXIS
+		| AUART_INTR_CTSMIS),
+			s->port.membase + AUART_INTR_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static void mxs_auart_reset(struct uart_port *u)
+{
+	int i;
+	unsigned int reg;
+
+	writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_CLR);
+
+	for (i = 0; i < 10000; i++) {
+		reg = readl(u->membase + AUART_CTRL0);
+		if (!(reg & AUART_CTRL0_SFTRST))
+			break;
+		udelay(3);
+	}
+	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
+}
+
+static int mxs_auart_startup(struct uart_port *u)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+
+	clk_enable(s->clk);
+
+	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
+
+	writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET);
+
+	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
+			u->membase + AUART_INTR);
+
+	/*
+	 * Enable fifo so all four bytes of a DMA word are written to
+	 * output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
+	 */
+	writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
+
+	return 0;
+}
+
+static void mxs_auart_shutdown(struct uart_port *u)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+
+	writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
+
+	writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+
+	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
+			u->membase + AUART_INTR_CLR);
+
+	clk_disable(s->clk);
+}
+
+static unsigned int mxs_auart_tx_empty(struct uart_port *u)
+{
+	if (readl(u->membase + AUART_STAT) & AUART_STAT_TXFE)
+		return TIOCSER_TEMT;
+	else
+		return 0;
+}
+
+static void mxs_auart_start_tx(struct uart_port *u)
+{
+	struct mxs_auart_port *s = to_auart_port(u);
+
+	/* enable transmitter */
+	writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_SET);
+
+	mxs_auart_tx_chars(s);
+}
+
+static void mxs_auart_stop_tx(struct uart_port *u)
+{
+	writel(AUART_CTRL2_TXE, u->membase + AUART_CTRL2_CLR);
+}
+
+static void mxs_auart_stop_rx(struct uart_port *u)
+{
+	writel(AUART_CTRL2_RXE, u->membase + AUART_CTRL2_CLR);
+}
+
+static void mxs_auart_break_ctl(struct uart_port *u, int ctl)
+{
+	if (ctl)
+		writel(AUART_LINECTRL_BRK,
+			     u->membase + AUART_LINECTRL_SET);
+	else
+		writel(AUART_LINECTRL_BRK,
+			     u->membase + AUART_LINECTRL_CLR);
+}
+
+static void mxs_auart_enable_ms(struct uart_port *port)
+{
+	/* just empty */
+}
+
+static struct uart_ops mxs_auart_ops = {
+	.tx_empty       = mxs_auart_tx_empty,
+	.start_tx       = mxs_auart_start_tx,
+	.stop_tx	= mxs_auart_stop_tx,
+	.stop_rx	= mxs_auart_stop_rx,
+	.enable_ms      = mxs_auart_enable_ms,
+	.break_ctl      = mxs_auart_break_ctl,
+	.set_mctrl	= mxs_auart_set_mctrl,
+	.get_mctrl      = mxs_auart_get_mctrl,
+	.startup	= mxs_auart_startup,
+	.shutdown       = mxs_auart_shutdown,
+	.set_termios    = mxs_auart_settermios,
+	.type	   	= mxs_auart_type,
+	.release_port   = mxs_auart_release_port,
+	.request_port   = mxs_auart_request_port,
+	.config_port    = mxs_auart_config_port,
+	.verify_port    = mxs_auart_verify_port,
+};
+
+static struct mxs_auart_port *auart_port[MXS_AUART_PORTS];
+
+#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
+static void mxs_auart_console_putchar(struct uart_port *port, int ch)
+{
+	unsigned int to = 1000;
+
+	while (readl(port->membase + AUART_STAT) & AUART_STAT_TXFF) {
+		if (!to--)
+			break;
+		udelay(1);
+	}
+
+	writel(ch, port->membase + AUART_DATA);
+}
+
+static void
+auart_console_write(struct console *co, const char *str, unsigned int count)
+{
+	struct mxs_auart_port *s;
+	struct uart_port *port;
+	unsigned int old_ctrl0, old_ctrl2;
+	unsigned int to = 1000;
+
+	if (co->index >	MXS_AUART_PORTS || co->index < 0)
+		return;
+
+	s = auart_port[co->index];
+	port = &s->port;
+
+	clk_enable(s->clk);
+
+	/* First save the CR then disable the interrupts */
+	old_ctrl2 = readl(port->membase + AUART_CTRL2);
+	old_ctrl0 = readl(port->membase + AUART_CTRL0);
+
+	writel(AUART_CTRL0_CLKGATE,
+		     port->membase + AUART_CTRL0_CLR);
+	writel(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE,
+		     port->membase + AUART_CTRL2_SET);
+
+	uart_console_write(port, str, count, mxs_auart_console_putchar);
+
+	/*
+	 * Finally, wait for transmitter to become empty
+	 * and restore the TCR
+	 */
+	while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) {
+		if (!to--)
+			break;
+		udelay(1);
+	}
+
+	writel(old_ctrl0, port->membase + AUART_CTRL0);
+	writel(old_ctrl2, port->membase + AUART_CTRL2);
+
+	clk_disable(s->clk);
+}
+
+static void __init
+auart_console_get_options(struct uart_port *port, int *baud,
+			  int *parity, int *bits)
+{
+	unsigned int lcr_h, quot;
+
+	if (!(readl(port->membase + AUART_CTRL2) & AUART_CTRL2_UARTEN))
+		return;
+
+	lcr_h = readl(port->membase + AUART_LINECTRL);
+
+	*parity = 'n';
+	if (lcr_h & AUART_LINECTRL_PEN) {
+		if (lcr_h & AUART_LINECTRL_EPS)
+			*parity = 'e';
+		else
+			*parity = 'o';
+	}
+
+	if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
+		*bits = 7;
+	else
+		*bits = 8;
+
+	quot = ((readl(port->membase + AUART_LINECTRL)
+			& AUART_LINECTRL_BAUD_DIVINT_MASK))
+			    >> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6);
+	quot |= ((readl(port->membase + AUART_LINECTRL)
+			& AUART_LINECTRL_BAUD_DIVFRAC_MASK))
+				>> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT;
+	if (quot == 0)
+		quot = 1;
+
+	*baud = (port->uartclk << 2) / quot;
+}
+
+static int __init
+auart_console_setup(struct console *co, char *options)
+{
+	struct mxs_auart_port *s;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+	int ret;
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port))
+		co->index = 0;
+	s = auart_port[co->index];
+	if (!s)
+		return -ENODEV;
+
+	clk_enable(s->clk);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		auart_console_get_options(&s->port, &baud, &parity, &bits);
+
+	ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
+
+	clk_disable(s->clk);
+
+	return ret;
+}
+
+static struct console auart_console = {
+	.name		= "ttyAPP",
+	.write		= auart_console_write,
+	.device		= uart_console_device,
+	.setup		= auart_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &auart_driver,
+};
+#endif
+
+static struct uart_driver auart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "ttyAPP",
+	.dev_name	= "ttyAPP",
+	.major		= 0,
+	.minor		= 0,
+	.nr		= MXS_AUART_PORTS,
+#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
+	.cons =		&auart_console,
+#endif
+};
+
+static int __devinit mxs_auart_probe(struct platform_device *pdev)
+{
+	struct mxs_auart_port *s;
+	u32 version;
+	int ret = 0;
+	struct resource *r;
+
+	s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL);
+	if (!s) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	s->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(s->clk)) {
+		ret = PTR_ERR(s->clk);
+		goto out_free;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		ret = -ENXIO;
+		goto out_free_clk;
+	}
+
+	s->port.mapbase = r->start;
+	s->port.membase = ioremap(r->start, resource_size(r));
+	s->port.ops = &mxs_auart_ops;
+	s->port.iotype = UPIO_MEM;
+	s->port.line = pdev->id < 0 ? 0 : pdev->id;
+	s->port.fifosize = 16;
+	s->port.uartclk = clk_get_rate(s->clk);
+	s->port.type = PORT_IMX;
+	s->port.dev = s->dev = get_device(&pdev->dev);
+
+	s->flags = 0;
+	s->ctrl = 0;
+
+	s->irq = platform_get_irq(pdev, 0);
+	s->port.irq = s->irq;
+	ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
+	if (ret)
+		goto out_free_clk;
+
+	platform_set_drvdata(pdev, s);
+
+	auart_port[pdev->id] = s;
+
+	mxs_auart_reset(&s->port);
+
+	ret = uart_add_one_port(&auart_driver, &s->port);
+	if (ret)
+		goto out_free_irq;
+
+	version = readl(s->port.membase + AUART_VERSION);
+	dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
+	       (version >> 24) & 0xff,
+	       (version >> 16) & 0xff, version & 0xffff);
+
+	return 0;
+
+out_free_irq:
+	auart_port[pdev->id] = NULL;
+	free_irq(s->irq, s);
+out_free_clk:
+	clk_put(s->clk);
+out_free:
+	kfree(s);
+out:
+	return ret;
+}
+
+static int __devexit mxs_auart_remove(struct platform_device *pdev)
+{
+	struct mxs_auart_port *s = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&auart_driver, &s->port);
+
+	auart_port[pdev->id] = NULL;
+
+	clk_put(s->clk);
+	free_irq(s->irq, s);
+	kfree(s);
+
+	return 0;
+}
+
+static struct platform_driver mxs_auart_driver = {
+	.probe = mxs_auart_probe,
+	.remove = __devexit_p(mxs_auart_remove),
+	.driver = {
+		.name = "mxs-auart",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init mxs_auart_init(void)
+{
+	int r;
+
+	r = uart_register_driver(&auart_driver);
+	if (r)
+		goto out;
+
+	r = platform_driver_register(&mxs_auart_driver);
+	if (r)
+		goto out_err;
+
+	return 0;
+out_err:
+	uart_unregister_driver(&auart_driver);
+out:
+	return r;
+}
+
+static void __exit mxs_auart_exit(void)
+{
+	platform_driver_unregister(&mxs_auart_driver);
+	uart_unregister_driver(&auart_driver);
+}
+
+module_init(mxs_auart_init);
+module_exit(mxs_auart_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Freescale MXS application uart driver");
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 77b1eb5..834fe94 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -88,7 +88,7 @@
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-#if defined(CONFIG_ARCH_MX35)
+#if defined(CONFIG_SOC_IMX35)
 	unsigned int v;
 
 	/* workaround ENGcm09152 for i.MX35 */
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index c8e360d..25c8c10 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -203,11 +203,6 @@
 		mdelay(10);
 	}
 
-	/* setup specific usb hw */
-	ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
-	if (ret < 0)
-		goto err_init;
-
 	ehci = hcd_to_ehci(hcd);
 
 	/* EHCI registers start at offset 0x100 */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6bafb51b..e0ea23f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2365,6 +2365,15 @@
 	help
 	  Framebuffer support for the JZ4740 SoC.
 
+config FB_MXS
+	tristate "MXS LCD framebuffer support"
+	depends on FB && ARCH_MXS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Framebuffer support for the MXS SoC.
+
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8c8fabd..9a096ae 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -153,6 +153,7 @@
 obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
+obj-$(CONFIG_FB_MXS)		  += mxsfb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
new file mode 100644
index 0000000..7d02848
--- /dev/null
+++ b/drivers/video/mxsfb.c
@@ -0,0 +1,919 @@
+/*
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix
+ *
+ * This code is based on:
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DRIVER_NAME "mxsfb"
+
+/**
+ * @file
+ * @brief LCDIF driver for i.MX23 and i.MX28
+ *
+ * The LCDIF support four modes of operation
+ * - MPU interface (to drive smart displays) -> not supported yet
+ * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
+ * - Dotclock interface (to drive LC displays with RGB data and sync signals)
+ * - DVI (to drive ITU-R BT656)  -> not supported yet
+ *
+ * This driver depends on a correct setup of the pins used for this purpose
+ * (platform specific).
+ *
+ * For the developer: Don't forget to set the data bus width to the display
+ * in the imx_fb_videomode structure. You will else end up with ugly colours.
+ * If you fight against jitter you can vary the clock delay. This is a feature
+ * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
+ * the required value in the imx_fb_videomode structure.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <mach/mxsfb.h>
+
+#define REG_SET	4
+#define REG_CLR	8
+
+#define LCDC_CTRL			0x00
+#define LCDC_CTRL1			0x10
+#define LCDC_V4_CTRL2			0x20
+#define LCDC_V3_TRANSFER_COUNT		0x20
+#define LCDC_V4_TRANSFER_COUNT		0x30
+#define LCDC_V4_CUR_BUF			0x40
+#define LCDC_V4_NEXT_BUF		0x50
+#define LCDC_V3_CUR_BUF			0x30
+#define LCDC_V3_NEXT_BUF		0x40
+#define LCDC_TIMING			0x60
+#define LCDC_VDCTRL0			0x70
+#define LCDC_VDCTRL1			0x80
+#define LCDC_VDCTRL2			0x90
+#define LCDC_VDCTRL3			0xa0
+#define LCDC_VDCTRL4			0xb0
+#define LCDC_DVICTRL0			0xc0
+#define LCDC_DVICTRL1			0xd0
+#define LCDC_DVICTRL2			0xe0
+#define LCDC_DVICTRL3			0xf0
+#define LCDC_DVICTRL4			0x100
+#define LCDC_V4_DATA			0x180
+#define LCDC_V3_DATA			0x1b0
+#define LCDC_V4_DEBUG0			0x1d0
+#define LCDC_V3_DEBUG0			0x1f0
+
+#define CTRL_SFTRST			(1 << 31)
+#define CTRL_CLKGATE			(1 << 30)
+#define CTRL_BYPASS_COUNT		(1 << 19)
+#define CTRL_VSYNC_MODE			(1 << 18)
+#define CTRL_DOTCLK_MODE		(1 << 17)
+#define CTRL_DATA_SELECT		(1 << 16)
+#define CTRL_SET_BUS_WIDTH(x)		(((x) & 0x3) << 10)
+#define CTRL_GET_BUS_WIDTH(x)		(((x) >> 10) & 0x3)
+#define CTRL_SET_WORD_LENGTH(x)		(((x) & 0x3) << 8)
+#define CTRL_GET_WORD_LENGTH(x)		(((x) >> 8) & 0x3)
+#define CTRL_MASTER			(1 << 5)
+#define CTRL_DF16			(1 << 3)
+#define CTRL_DF18			(1 << 2)
+#define CTRL_DF24			(1 << 1)
+#define CTRL_RUN			(1 << 0)
+
+#define CTRL1_FIFO_CLEAR		(1 << 21)
+#define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16)
+#define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf)
+
+#define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16)
+#define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff)
+#define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff)
+#define TRANSFER_COUNT_GET_HCOUNT(x)	((x) & 0xffff)
+
+
+#define VDCTRL0_ENABLE_PRESENT		(1 << 28)
+#define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27)
+#define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26)
+#define VDCTRL0_DOTCLK_ACT_FAILING	(1 << 25)
+#define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24)
+#define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21)
+#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20)
+#define VDCTRL0_HALF_LINE		(1 << 19)
+#define VDCTRL0_HALF_LINE_MODE		(1 << 18)
+#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
+#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
+
+#define VDCTRL2_SET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
+#define VDCTRL2_GET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
+
+#define VDCTRL3_MUX_SYNC_SIGNALS	(1 << 29)
+#define VDCTRL3_VSYNC_ONLY		(1 << 28)
+#define SET_HOR_WAIT_CNT(x)		(((x) & 0xfff) << 16)
+#define GET_HOR_WAIT_CNT(x)		(((x) >> 16) & 0xfff)
+#define SET_VERT_WAIT_CNT(x)		((x) & 0xffff)
+#define GET_VERT_WAIT_CNT(x)		((x) & 0xffff)
+
+#define VDCTRL4_SET_DOTCLK_DLY(x)	(((x) & 0x7) << 29) /* v4 only */
+#define VDCTRL4_GET_DOTCLK_DLY(x)	(((x) >> 29) & 0x7) /* v4 only */
+#define VDCTRL4_SYNC_SIGNALS_ON		(1 << 18)
+#define SET_DOTCLK_H_VALID_DATA_CNT(x)	((x) & 0x3ffff)
+
+#define DEBUG0_HSYNC			(1 < 26)
+#define DEBUG0_VSYNC			(1 < 25)
+
+#define MIN_XRES			120
+#define MIN_YRES			120
+
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+#define TRANSP 3
+
+enum mxsfb_devtype {
+	MXSFB_V3,
+	MXSFB_V4,
+};
+
+/* CPU dependent register offsets */
+struct mxsfb_devdata {
+	unsigned transfer_count;
+	unsigned cur_buf;
+	unsigned next_buf;
+	unsigned debug0;
+	unsigned hs_wdth_mask;
+	unsigned hs_wdth_shift;
+	unsigned ipversion;
+};
+
+struct mxsfb_info {
+	struct fb_info fb_info;
+	struct platform_device *pdev;
+	struct clk *clk;
+	void __iomem *base;	/* registers */
+	unsigned allocated_size;
+	int enabled;
+	unsigned ld_intf_width;
+	unsigned dotclk_delay;
+	const struct mxsfb_devdata *devdata;
+	int mapped;
+};
+
+#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
+#define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
+
+static const struct mxsfb_devdata mxsfb_devdata[] = {
+	[MXSFB_V3] = {
+		.transfer_count = LCDC_V3_TRANSFER_COUNT,
+		.cur_buf = LCDC_V3_CUR_BUF,
+		.next_buf = LCDC_V3_NEXT_BUF,
+		.debug0 = LCDC_V3_DEBUG0,
+		.hs_wdth_mask = 0xff,
+		.hs_wdth_shift = 24,
+		.ipversion = 3,
+	},
+	[MXSFB_V4] = {
+		.transfer_count = LCDC_V4_TRANSFER_COUNT,
+		.cur_buf = LCDC_V4_CUR_BUF,
+		.next_buf = LCDC_V4_NEXT_BUF,
+		.debug0 = LCDC_V4_DEBUG0,
+		.hs_wdth_mask = 0x3fff,
+		.hs_wdth_shift = 18,
+		.ipversion = 4,
+	},
+};
+
+#define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
+
+/* mask and shift depends on architecture */
+static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
+{
+	return (val & host->devdata->hs_wdth_mask) <<
+		host->devdata->hs_wdth_shift;
+}
+
+static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
+{
+	return (val >> host->devdata->hs_wdth_shift) &
+		host->devdata->hs_wdth_mask;
+}
+
+static const struct fb_bitfield def_rgb565[] = {
+	[RED] = {
+		.offset = 11,
+		.length = 5,
+	},
+	[GREEN] = {
+		.offset = 5,
+		.length = 6,
+	},
+	[BLUE] = {
+		.offset = 0,
+		.length = 5,
+	},
+	[TRANSP] = {	/* no support for transparency */
+		.length = 0,
+	}
+};
+
+static const struct fb_bitfield def_rgb666[] = {
+	[RED] = {
+		.offset = 16,
+		.length = 6,
+	},
+	[GREEN] = {
+		.offset = 8,
+		.length = 6,
+	},
+	[BLUE] = {
+		.offset = 0,
+		.length = 6,
+	},
+	[TRANSP] = {	/* no support for transparency */
+		.length = 0,
+	}
+};
+
+static const struct fb_bitfield def_rgb888[] = {
+	[RED] = {
+		.offset = 16,
+		.length = 8,
+	},
+	[GREEN] = {
+		.offset = 8,
+		.length = 8,
+	},
+	[BLUE] = {
+		.offset = 0,
+		.length = 8,
+	},
+	[TRANSP] = {	/* no support for transparency */
+		.length = 0,
+	}
+};
+
+static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int mxsfb_check_var(struct fb_var_screeninfo *var,
+		struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	const struct fb_bitfield *rgb = NULL;
+
+	if (var->xres < MIN_XRES)
+		var->xres = MIN_XRES;
+	if (var->yres < MIN_YRES)
+		var->yres = MIN_YRES;
+
+	var->xres_virtual = var->xres;
+
+	var->yres_virtual = var->yres;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		/* always expect RGB 565 */
+		rgb = def_rgb565;
+		break;
+	case 32:
+		switch (host->ld_intf_width) {
+		case STMLCDIF_8BIT:
+			pr_debug("Unsupported LCD bus width mapping\n");
+			break;
+		case STMLCDIF_16BIT:
+		case STMLCDIF_18BIT:
+			/* 24 bit to 18 bit mapping */
+			rgb = def_rgb666;
+			break;
+		case STMLCDIF_24BIT:
+			/* real 24 bit */
+			rgb = def_rgb888;
+			break;
+		}
+		break;
+	default:
+		pr_debug("Unsupported colour depth: %u\n", var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/*
+	 * Copy the RGB parameters for this display
+	 * from the machine specific parameters.
+	 */
+	var->red    = rgb[RED];
+	var->green  = rgb[GREEN];
+	var->blue   = rgb[BLUE];
+	var->transp = rgb[TRANSP];
+
+	return 0;
+}
+
+static void mxsfb_enable_controller(struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	u32 reg;
+
+	dev_dbg(&host->pdev->dev, "%s\n", __func__);
+
+	clk_enable(host->clk);
+	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
+
+	/* if it was disabled, re-enable the mode again */
+	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
+
+	/* enable the SYNC signals first, then the DMA engine */
+	reg = readl(host->base + LCDC_VDCTRL4);
+	reg |= VDCTRL4_SYNC_SIGNALS_ON;
+	writel(reg, host->base + LCDC_VDCTRL4);
+
+	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
+
+	host->enabled = 1;
+}
+
+static void mxsfb_disable_controller(struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	unsigned loop;
+	u32 reg;
+
+	dev_dbg(&host->pdev->dev, "%s\n", __func__);
+
+	/*
+	 * Even if we disable the controller here, it will still continue
+	 * until its FIFOs are running out of data
+	 */
+	writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
+
+	loop = 1000;
+	while (loop) {
+		reg = readl(host->base + LCDC_CTRL);
+		if (!(reg & CTRL_RUN))
+			break;
+		loop--;
+	}
+
+	writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
+
+	clk_disable(host->clk);
+
+	host->enabled = 0;
+}
+
+static int mxsfb_set_par(struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	u32 ctrl, vdctrl0, vdctrl4;
+	int line_size, fb_size;
+	int reenable = 0;
+
+	line_size =  fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
+	fb_size = fb_info->var.yres_virtual * line_size;
+
+	if (fb_size > fb_info->fix.smem_len)
+		return -ENOMEM;
+
+	fb_info->fix.line_length = line_size;
+
+	/*
+	 * It seems, you can't re-program the controller if it is still running.
+	 * This may lead into shifted pictures (FIFO issue?).
+	 * So, first stop the controller and drain its FIFOs
+	 */
+	if (host->enabled) {
+		reenable = 1;
+		mxsfb_disable_controller(fb_info);
+	}
+
+	/* clear the FIFOs */
+	writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
+
+	ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
+		CTRL_SET_BUS_WIDTH(host->ld_intf_width);;
+
+	switch (fb_info->var.bits_per_pixel) {
+	case 16:
+		dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
+		ctrl |= CTRL_SET_WORD_LENGTH(0);
+		writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
+		break;
+	case 32:
+		dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
+		ctrl |= CTRL_SET_WORD_LENGTH(3);
+		switch (host->ld_intf_width) {
+		case STMLCDIF_8BIT:
+			dev_dbg(&host->pdev->dev,
+					"Unsupported LCD bus width mapping\n");
+			return -EINVAL;
+		case STMLCDIF_16BIT:
+		case STMLCDIF_18BIT:
+			/* 24 bit to 18 bit mapping */
+			ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
+					    *  each colour component
+					    */
+			break;
+		case STMLCDIF_24BIT:
+			/* real 24 bit */
+			break;
+		}
+		/* do not use packed pixels = one pixel per word instead */
+		writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
+		break;
+	default:
+		dev_dbg(&host->pdev->dev, "Unhandled color depth of %u\n",
+				fb_info->var.bits_per_pixel);
+		return -EINVAL;
+	}
+
+	writel(ctrl, host->base + LCDC_CTRL);
+
+	writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
+			TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
+			host->base + host->devdata->transfer_count);
+
+	vdctrl0 = VDCTRL0_ENABLE_PRESENT |	/* always in DOTCLOCK mode */
+		VDCTRL0_VSYNC_PERIOD_UNIT |
+		VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
+		VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
+	if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
+	if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
+	if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
+	if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
+		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
+
+	writel(vdctrl0, host->base + LCDC_VDCTRL0);
+
+	/* frame length in lines */
+	writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
+		fb_info->var.lower_margin + fb_info->var.yres,
+		host->base + LCDC_VDCTRL1);
+
+	/* line length in units of clocks or pixels */
+	writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
+		VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
+		fb_info->var.hsync_len + fb_info->var.right_margin +
+		fb_info->var.xres),
+		host->base + LCDC_VDCTRL2);
+
+	writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
+		fb_info->var.hsync_len) |
+		SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
+			fb_info->var.vsync_len),
+		host->base + LCDC_VDCTRL3);
+
+	vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
+	if (mxsfb_is_v4(host))
+		vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
+	writel(vdctrl4, host->base + LCDC_VDCTRL4);
+
+	writel(fb_info->fix.smem_start +
+			fb_info->fix.line_length * fb_info->var.yoffset,
+			host->base + host->devdata->next_buf);
+
+	if (reenable)
+		mxsfb_enable_controller(fb_info);
+
+	return 0;
+}
+
+static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+		u_int transp, struct fb_info *fb_info)
+{
+	unsigned int val;
+	int ret = -EINVAL;
+
+	/*
+	 * If greyscale is true, then we convert the RGB value
+	 * to greyscale no matter what visual we are using.
+	 */
+	if (fb_info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	switch (fb_info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/*
+		 * 12 or 16-bit True Colour.  We encode the RGB value
+		 * according to the RGB bitfield information.
+		 */
+		if (regno < 16) {
+			u32 *pal = fb_info->pseudo_palette;
+
+			val  = chan_to_field(red, &fb_info->var.red);
+			val |= chan_to_field(green, &fb_info->var.green);
+			val |= chan_to_field(blue, &fb_info->var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_STATIC_PSEUDOCOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		break;
+	}
+
+	return ret;
+}
+
+static int mxsfb_blank(int blank, struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+
+	switch (blank) {
+	case FB_BLANK_POWERDOWN:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+		if (host->enabled)
+			mxsfb_disable_controller(fb_info);
+		break;
+
+	case FB_BLANK_UNBLANK:
+		if (!host->enabled)
+			mxsfb_enable_controller(fb_info);
+		break;
+	}
+	return 0;
+}
+
+static int mxsfb_pan_display(struct fb_var_screeninfo *var,
+		struct fb_info *fb_info)
+{
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	unsigned offset;
+
+	if (var->xoffset != 0)
+		return -EINVAL;
+
+	offset = fb_info->fix.line_length * var->yoffset;
+
+	/* update on next VSYNC */
+	writel(fb_info->fix.smem_start + offset,
+			host->base + host->devdata->next_buf);
+
+	return 0;
+}
+
+static struct fb_ops mxsfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = mxsfb_check_var,
+	.fb_set_par = mxsfb_set_par,
+	.fb_setcolreg = mxsfb_setcolreg,
+	.fb_blank = mxsfb_blank,
+	.fb_pan_display = mxsfb_pan_display,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+};
+
+static int __devinit mxsfb_restore_mode(struct mxsfb_info *host)
+{
+	struct fb_info *fb_info = &host->fb_info;
+	unsigned line_count;
+	unsigned period;
+	unsigned long pa, fbsize;
+	int bits_per_pixel, ofs;
+	u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
+	struct fb_videomode vmode;
+
+	/* Only restore the mode when the controller is running */
+	ctrl = readl(host->base + LCDC_CTRL);
+	if (!(ctrl & CTRL_RUN))
+		return -EINVAL;
+
+	vdctrl0 = readl(host->base + LCDC_VDCTRL0);
+	vdctrl2 = readl(host->base + LCDC_VDCTRL2);
+	vdctrl3 = readl(host->base + LCDC_VDCTRL3);
+	vdctrl4 = readl(host->base + LCDC_VDCTRL4);
+
+	transfer_count = readl(host->base + host->devdata->transfer_count);
+
+	vmode.xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
+	vmode.yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
+
+	switch (CTRL_GET_WORD_LENGTH(ctrl)) {
+	case 0:
+		bits_per_pixel = 16;
+		break;
+	case 3:
+		bits_per_pixel = 32;
+	case 1:
+	default:
+		return -EINVAL;
+	}
+
+	fb_info->var.bits_per_pixel = bits_per_pixel;
+
+	vmode.pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
+	vmode.hsync_len = get_hsync_pulse_width(host, vdctrl2);
+	vmode.left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode.hsync_len;
+	vmode.right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) - vmode.hsync_len -
+		vmode.left_margin - vmode.xres;
+	vmode.vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
+	period = readl(host->base + LCDC_VDCTRL1);
+	vmode.upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode.vsync_len;
+	vmode.lower_margin = period - vmode.vsync_len - vmode.upper_margin - vmode.yres;
+
+	vmode.vmode = FB_VMODE_NONINTERLACED;
+
+	vmode.sync = 0;
+	if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
+		vmode.sync |= FB_SYNC_HOR_HIGH_ACT;
+	if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
+		vmode.sync |= FB_SYNC_VERT_HIGH_ACT;
+
+	pr_debug("Reconstructed video mode:\n");
+	pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
+			vmode.xres, vmode.yres,
+			vmode.hsync_len, vmode.left_margin, vmode.right_margin,
+			vmode.vsync_len, vmode.upper_margin, vmode.lower_margin);
+	pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode.pixclock));
+
+	fb_add_videomode(&vmode, &fb_info->modelist);
+
+	host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
+	host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
+
+	fb_info->fix.line_length = vmode.xres * (bits_per_pixel >> 3);
+
+	pa = readl(host->base + host->devdata->cur_buf);
+	fbsize = fb_info->fix.line_length * vmode.yres;
+	if (pa < fb_info->fix.smem_start)
+		return -EINVAL;
+	if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len)
+		return -EINVAL;
+	ofs = pa - fb_info->fix.smem_start;
+	if (ofs) {
+		memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
+		writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
+	}
+
+	line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
+	fb_info->fix.ypanstep = 1;
+
+	clk_enable(host->clk);
+	host->enabled = 1;
+
+	return 0;
+}
+
+static int __devinit mxsfb_init_fbinfo(struct mxsfb_info *host)
+{
+	struct fb_info *fb_info = &host->fb_info;
+	struct fb_var_screeninfo *var = &fb_info->var;
+	struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data;
+	dma_addr_t fb_phys;
+	void *fb_virt;
+	unsigned fb_size = pdata->fb_size;
+
+	fb_info->fbops = &mxsfb_ops;
+	fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
+	strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
+	fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
+	fb_info->fix.ypanstep = 1;
+	fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
+	fb_info->fix.accel = FB_ACCEL_NONE;
+
+	var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+	var->nonstd = 0;
+	var->activate = FB_ACTIVATE_NOW;
+	var->accel_flags = 0;
+	var->vmode = FB_VMODE_NONINTERLACED;
+
+	host->dotclk_delay = pdata->dotclk_delay;
+	host->ld_intf_width = pdata->ld_intf_width;
+
+	/* Memory allocation for framebuffer */
+	if (pdata->fb_phys) {
+		if (!fb_size)
+			return -EINVAL;
+
+		fb_phys = pdata->fb_phys;
+
+		if (!request_mem_region(fb_phys, fb_size, host->pdev->name))
+			return -ENOMEM;
+
+		fb_virt = ioremap(fb_phys, fb_size);
+		if (!fb_virt) {
+			release_mem_region(fb_phys, fb_size);
+			return -ENOMEM;
+		}
+		host->mapped = 1;
+	} else {
+		if (!fb_size)
+			fb_size = SZ_2M; /* default */
+		fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
+		if (!fb_virt)
+			return -ENOMEM;
+
+		fb_phys = virt_to_phys(fb_virt);
+	}
+
+	fb_info->fix.smem_start = fb_phys;
+	fb_info->screen_base = fb_virt;
+	fb_info->screen_size = fb_info->fix.smem_len = fb_size;
+
+	if (mxsfb_restore_mode(host))
+		memset(fb_virt, 0, fb_size);
+
+	return 0;
+}
+
+static void __devexit mxsfb_free_videomem(struct mxsfb_info *host)
+{
+	struct fb_info *fb_info = &host->fb_info;
+
+	if (host->mapped) {
+		iounmap(fb_info->screen_base);
+		release_mem_region(fb_info->fix.smem_start,
+				fb_info->screen_size);
+	} else {
+		free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
+	}
+}
+
+static int __devinit mxsfb_probe(struct platform_device *pdev)
+{
+	struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *res;
+	struct mxsfb_info *host;
+	struct fb_info *fb_info;
+	struct fb_modelist *modelist;
+	int i, ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platformdata. Giving up\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Cannot get memory IO resource\n");
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name))
+		return -EBUSY;
+
+	fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
+	if (!fb_info) {
+		dev_err(&pdev->dev, "Failed to allocate fbdev\n");
+		ret = -ENOMEM;
+		goto error_alloc_info;
+	}
+
+	host = to_imxfb_host(fb_info);
+
+	host->base = ioremap(res->start, resource_size(res));
+	if (!host->base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto error_ioremap;
+	}
+
+	host->pdev = pdev;
+	platform_set_drvdata(pdev, host);
+
+	host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
+
+	host->clk = clk_get(&host->pdev->dev, NULL);
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
+		goto error_getclock;
+	}
+
+	fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+	if (!fb_info->pseudo_palette) {
+		ret = -ENOMEM;
+		goto error_pseudo_pallette;
+	}
+
+	INIT_LIST_HEAD(&fb_info->modelist);
+
+	ret = mxsfb_init_fbinfo(host);
+	if (ret != 0)
+		goto error_init_fb;
+
+	for (i = 0; i < pdata->mode_count; i++)
+		fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist);
+
+	modelist = list_first_entry(&fb_info->modelist,
+			struct fb_modelist, list);
+	fb_videomode_to_var(&fb_info->var, &modelist->mode);
+
+	/* init the color fields */
+	mxsfb_check_var(&fb_info->var, fb_info);
+
+	platform_set_drvdata(pdev, fb_info);
+
+	ret = register_framebuffer(fb_info);
+	if (ret != 0) {
+		dev_err(&pdev->dev,"Failed to register framebuffer\n");
+		goto error_register;
+	}
+
+	if (!host->enabled) {
+		writel(0, host->base + LCDC_CTRL);
+		mxsfb_set_par(fb_info);
+		mxsfb_enable_controller(fb_info);
+	}
+
+	dev_info(&pdev->dev, "initialized\n");
+
+	return 0;
+
+error_register:
+	if (host->enabled)
+		clk_disable(host->clk);
+	fb_destroy_modelist(&fb_info->modelist);
+error_init_fb:
+	kfree(fb_info->pseudo_palette);
+error_pseudo_pallette:
+	clk_put(host->clk);
+error_getclock:
+	iounmap(host->base);
+error_ioremap:
+	framebuffer_release(fb_info);
+error_alloc_info:
+	release_mem_region(res->start, resource_size(res));
+
+	return ret;
+}
+
+static int __devexit mxsfb_remove(struct platform_device *pdev)
+{
+	struct fb_info *fb_info = platform_get_drvdata(pdev);
+	struct mxsfb_info *host = to_imxfb_host(fb_info);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (host->enabled)
+		mxsfb_disable_controller(fb_info);
+
+	unregister_framebuffer(fb_info);
+	kfree(fb_info->pseudo_palette);
+	mxsfb_free_videomem(host);
+	iounmap(host->base);
+	clk_put(host->clk);
+
+	framebuffer_release(fb_info);
+	release_mem_region(res->start, resource_size(res));
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_device_id mxsfb_devtype[] = {
+	{
+		.name = "imx23-fb",
+		.driver_data = MXSFB_V3,
+	}, {
+		.name = "imx28-fb",
+		.driver_data = MXSFB_V4,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static struct platform_driver mxsfb_driver = {
+	.probe = mxsfb_probe,
+	.remove = __devexit_p(mxsfb_remove),
+	.id_table = mxsfb_devtype,
+	.driver = {
+		   .name = DRIVER_NAME,
+	},
+};
+
+static int __init mxsfb_init(void)
+{
+	return platform_driver_register(&mxsfb_driver);
+}
+
+static void __exit mxsfb_exit(void)
+{
+	platform_driver_unregister(&mxsfb_driver);
+}
+
+module_init(mxsfb_init);
+module_exit(mxsfb_exit);
+
+MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 642270a..9eeb8f0 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -44,7 +44,8 @@
 	tristate "Eukrea TLV320"
 	depends on MACH_EUKREA_MBIMX27_BASEBOARD \
 		|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD35_BASEBOARD
+		|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
 	select SND_SOC_TLV320AIC23
 	select SND_MXC_SOC_SSI
 	select SND_MXC_SOC_FIQ
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index 1e9bcca..75fb4b8 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -98,7 +98,8 @@
 	int ret;
 
 	if (!machine_is_eukrea_cpuimx27() && !machine_is_eukrea_cpuimx25sd()
-		&& !machine_is_eukrea_cpuimx35sd())
+		&& !machine_is_eukrea_cpuimx35sd()
+		&& !machine_is_eukrea_cpuimx51sd())
 		/* return happy. We might run on a totally different machine */
 		return 0;