Merge commit 'kumar/kumar-for-2.6.28'
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c171f5b..bbe149c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -19,9 +19,6 @@
default 64 if PPC64
default 32 if !PPC64
-config PPC_MERGE
- def_bool y
-
config MMU
bool
default y
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index aac1406..8fc6d72 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -68,7 +68,8 @@
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
+ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
+ cuboot-acadia.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -211,6 +212,7 @@
# Board ports in arch/powerpc/platform/40x/Kconfig
image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_WALNUT) += treeImage.walnut
+image-$(CONFIG_ACADIA) += cuImage.acadia
# Board ports in arch/powerpc/platform/44x/Kconfig
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
@@ -319,6 +321,9 @@
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index dcc9ab2..3091d1d 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -11,7 +11,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Usage: addnote zImage [note.elf]
+ * Usage: addnote [-r realbase] zImage [note.elf]
*
* If note.elf is supplied, it is the name of an ELF file that contains
* an RPA note to use instead of the built-in one. Alternatively, the
@@ -153,18 +153,31 @@
int
main(int ac, char **av)
{
- int fd, n, i;
+ int fd, n, i, ai;
int ph, ps, np;
int nnote, nnote2, ns;
unsigned char *rpap;
+ char *p, *endp;
- if (ac != 2 && ac != 3) {
- fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]);
+ ai = 1;
+ if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) {
+ /* process -r realbase */
+ p = av[ai + 1];
+ descr[1] = strtol(p, &endp, 16);
+ if (endp == p || *endp != 0) {
+ fprintf(stderr, "Can't parse -r argument '%s' as hex\n",
+ p);
+ exit(1);
+ }
+ ai += 2;
+ }
+ if (ac != ai + 1 && ac != ai + 2) {
+ fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]);
exit(1);
}
- fd = open(av[1], O_RDWR);
+ fd = open(av[ai], O_RDWR);
if (fd < 0) {
- perror(av[1]);
+ perror(av[ai]);
exit(1);
}
@@ -184,12 +197,12 @@
if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
|| buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[1]);
+ av[ai]);
exit(1);
}
- if (ac == 3)
- rpap = read_rpanote(av[2], &nnote2);
+ if (ac == ai + 2)
+ rpap = read_rpanote(av[ai + 1], &nnote2);
ph = GET_32BE(buf, E_PHOFF);
ps = GET_16BE(buf, E_PHENTSIZE);
@@ -202,7 +215,7 @@
for (i = 0; i < np; ++i) {
if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n",
- av[1]);
+ av[ai]);
exit(0);
}
ph += ps;
@@ -260,18 +273,18 @@
exit(1);
}
if (i < n) {
- fprintf(stderr, "%s: write truncated\n", av[1]);
+ fprintf(stderr, "%s: write truncated\n", av[ai]);
exit(1);
}
exit(0);
notelf:
- fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]);
+ fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]);
exit(1);
nospace:
fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
- av[1]);
+ av[ai]);
exit(1);
}
diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c
index a861154..4c42ec8 100644
--- a/arch/powerpc/boot/cuboot-52xx.c
+++ b/arch/powerpc/boot/cuboot-52xx.c
@@ -37,6 +37,10 @@
* this can do a simple path lookup.
*/
soc = find_node_by_devtype(NULL, "soc");
+ if (!soc)
+ soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr");
+ if (!soc)
+ soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr");
if (soc) {
setprop(soc, "bus-frequency", &bd.bi_ipbfreq,
sizeof(bd.bi_ipbfreq));
diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c
new file mode 100644
index 0000000..0634aba
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-acadia.c
@@ -0,0 +1,174 @@
+/*
+ * Old U-boot compatibility for Acadia
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
+
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+
+#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
+#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
+
+static void get_clocks(void)
+{
+ unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
+ unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
+ unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long est; /* current estimate */
+ unsigned long baud;
+ void *np;
+
+ /* read the sysclk value from the CPLD */
+ sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
+
+ /*
+ * Read PLL Mode registers
+ */
+ cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
+ cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
+
+ /*
+ * Determine forward divider A
+ */
+ pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B
+ */
+ pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+ if (pllFwdDivB == 0)
+ pllFwdDivB = 8;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (pllFbkDiv == 0)
+ pllFbkDiv = 256;
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
+
+ /*
+ * Determine PLB_DIV.
+ */
+ pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+ if (pllPlbDiv == 0)
+ pllPlbDiv = 16;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+ if (pllExtBusDiv == 0)
+ pllExtBusDiv = 16;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+ if (pllOpbDiv == 0)
+ pllOpbDiv = 16;
+
+ /* There is a bug in U-Boot that prevents us from using
+ * bd.bi_opbfreq because U-Boot doesn't populate it for
+ * 405EZ. We get to calculate it, yay!
+ */
+ freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
+
+ freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
+
+ plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
+ pllFwdDivB : pllFwdDiv) *
+ pllFbkDiv) / pllFwdDivB);
+
+ np = find_node_by_alias("serial0");
+ if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
+ fatal("no current-speed property\n\r");
+
+ udiv = 256; /* Assume lowest possible serial clk */
+ div = plloutb / (16 * baud); /* total divisor */
+ umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */
+ diff = 256; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (256) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 256; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+ freqUART = plloutb / udiv;
+
+ dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
+ dt_fixup_clock("/plb/ebc", freqEBC);
+ dt_fixup_clock("/plb/opb", freqOPB);
+ dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
+ dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
+}
+
+static void acadia_fixups(void)
+{
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+ get_clocks();
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = acadia_fixups;
+ platform_ops.exit = ibm40x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts
new file mode 100644
index 0000000..57291f6
--- /dev/null
+++ b/arch/powerpc/boot/dts/acadia.dts
@@ -0,0 +1,224 @@
+/*
+ * Device Tree Source for AMCC Acadia (405EZ)
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "amcc,acadia";
+ compatible = "amcc,acadia";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,405EZ";
+ reg = <0x0>;
+ clock-frequency = <0>; /* Filled in by wrapper */
+ timebase-frequency = <0>; /* Filled in by wrapper */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>; /* Filled in by wrapper */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic-405ez", "ibm,uic";
+ interrupt-controller;
+ dcr-reg = <0x0c0 0x009>;
+ cell-index = <0>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ plb {
+ compatible = "ibm,plb-405ez", "ibm,plb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by wrapper */
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-405ez", "ibm,mcmal";
+ dcr-reg = <0x380 0x62>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&UIC0>;
+ /* 405EZ has only 3 interrupts to the UIC, as
+ * SERR, TXDE, and RXDE are or'd together into
+ * one UIC bit
+ */
+ interrupts = <
+ 0x13 0x4 /* TXEOB */
+ 0x15 0x4 /* RXEOB */
+ 0x12 0x4 /* SERR, TXDE, RXDE */>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405ez", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dcr-reg = <0x0a 0x05>;
+ clock-frequency = <0>; /* Filled in by wrapper */
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x8>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by wrapper */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x5 0x4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600400 0x8>;
+ clock-frequency = <0>; /* Filled in by wrapper */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x6 0x4>;
+ };
+
+ IIC: i2c@ef600500 {
+ compatible = "ibm,iic-405ez", "ibm,iic";
+ reg = <0xef600500 0x11>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xa 0x4>;
+ };
+
+ GPIO0: gpio@ef600700 {
+ compatible = "ibm,gpio-405ez";
+ reg = <0xef600700 0x20>;
+ };
+
+ GPIO1: gpio@ef600800 {
+ compatible = "ibm,gpio-405ez";
+ reg = <0xef600800 0x20>;
+ };
+
+ EMAC0: ethernet@ef600900 {
+ device_type = "network";
+ compatible = "ibm,emac-405ez", "ibm,emac";
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0x10 0x4 /* Ethernet */
+ 0x11 0x4 /* Ethernet Wake up */>;
+ local-mac-address = [000000000000]; /* Filled in by wrapper */
+ reg = <0xef600900 0x70>;
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "mii";
+ phy-map = <0x0>;
+ };
+
+ CAN0: can@ef601000 {
+ compatible = "amcc,can-405ez";
+ reg = <0xef601000 0x620>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x7 0x4>;
+ };
+
+ CAN1: can@ef601800 {
+ compatible = "amcc,can-405ez";
+ reg = <0xef601800 0x620>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x8 0x4>;
+ };
+
+ cameleon@ef602000 {
+ compatible = "amcc,cameleon-405ez";
+ reg = <0xef602000 0x800>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0xb 0x4 0xc 0x4>;
+ };
+
+ ieee1588@ef602800 {
+ compatible = "amcc,ieee1588-405ez";
+ reg = <0xef602800 0x60>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x4 0x4>;
+ /* This thing is a bit weird. It has it's own UIC
+ * that it uses to generate snapshot triggers. We
+ * don't really support this device yet, and it needs
+ * work to figure this out.
+ */
+ dcr-reg = <0xe0 0x9>;
+ };
+
+ usb@ef603000 {
+ compatible = "ohci-be";
+ reg = <0xef603000 0x80>;
+ interrupts-parent = <&UIC0>;
+ interrupts = <0xd 0x4 0xe 0x4>;
+ };
+
+ dac@ef603300 {
+ compatible = "amcc,dac-405ez";
+ reg = <0xef603300 0x40>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x18 0x4>;
+ };
+
+ adc@ef603400 {
+ compatible = "amcc,adc-405ez";
+ reg = <0xef603400 0x40>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x17 0x4>;
+ };
+
+ spi@ef603500 {
+ compatible = "amcc,spi-405ez";
+ reg = <0xef603500 0x100>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x9 0x4>;
+ };
+ };
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405ez", "ibm,ebc";
+ dcr-reg = <0x12 0x2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by wrapper */
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
new file mode 100644
index 0000000..7988598
--- /dev/null
+++ b/arch/powerpc/boot/dts/hcu4.dts
@@ -0,0 +1,168 @@
+/*
+* Device Tree Source for Netstal Maschinen HCU4
+* based on the IBM Walnut
+*
+* Copyright 2008
+* Niklaus Giger <niklaus.giger@member.fsf.org>
+*
+* Copyright 2007 IBM Corp.
+* Josh Boyer <jwboyer@linux.vnet.ibm.com>
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2. This program is licensed "as is" without
+* any warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+/ {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ model = "netstal,hcu4";
+ compatible = "netstal,hcu4";
+ dcr-parent = <0x1>;
+
+ aliases {
+ ethernet0 = "/plb/opb/ethernet@ef600800";
+ serial0 = "/plb/opb/serial@ef600300";
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,405GPr";
+ reg = <0x0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0x0>; /* Filled in by U-Boot */
+ i-cache-line-size = <0x20>;
+ d-cache-line-size = <0x20>;
+ i-cache-size = <0x4000>;
+ d-cache-size = <0x4000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ linux,phandle = <0x1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0x0>;
+ dcr-reg = <0xc0 0x9>;
+ #address-cells = <0x0>;
+ #size-cells = <0x0>;
+ #interrupt-cells = <0x2>;
+ linux,phandle = <0x2>;
+ };
+
+ plb {
+ compatible = "ibm,plb3";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+ clock-frequency = <0x0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405gp";
+ dcr-reg = <0x10 0x2>;
+ };
+
+ MAL: mcmal {
+ compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+ dcr-reg = <0x180 0x62>;
+ num-tx-chans = <0x1>;
+ num-rx-chans = <0x1>;
+ interrupt-parent = <0x2>;
+ interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
+ linux,phandle = <0x3>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405gp", "ibm,opb";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0xef600000 0xef600000 0xa00000>;
+ dcr-reg = <0xa0 0x5>;
+ clock-frequency = <0x0>; /* Filled in by U-Boot */
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x8>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0x0>;/* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <0x2>;
+ interrupts = <0x0 0x4>;
+ };
+
+ IIC: i2c@ef600500 {
+ compatible = "ibm,iic-405gp", "ibm,iic";
+ reg = <0xef600500 0x11>;
+ interrupt-parent = <0x2>;
+ interrupts = <0x2 0x4>;
+ };
+
+ GPIO: gpio@ef600700 {
+ compatible = "ibm,gpio-405gp";
+ reg = <0xef600700 0x20>;
+ };
+
+ EMAC: ethernet@ef600800 {
+ device_type = "network";
+ compatible = "ibm,emac-405gp", "ibm,emac";
+ interrupt-parent = <0x2>;
+ interrupts = <0xf 0x4 0x9 0x4>;
+ local-mac-address = [00 00 00 00 00 00];
+ reg = <0xef600800 0x70>;
+ mal-device = <0x3>;
+ mal-tx-channel = <0x0>;
+ mal-rx-channel = <0x0>;
+ cell-index = <0x0>;
+ max-frame-size = <0x5dc>;
+ rx-fifo-size = <0x1000>;
+ tx-fifo-size = <0x800>;
+ phy-mode = "rmii";
+ phy-map = <0x1>;
+ };
+ };
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405gp", "ibm,ebc";
+ dcr-reg = <0x12 0x2>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ clock-frequency = <0x0>; /* Filled in by U-Boot */
+
+ sram@0,0 {
+ reg = <0x0 0x0 0x80000>;
+ };
+
+ flash@0,80000 {
+ compatible = "jedec-flash";
+ bank-width = <0x1>;
+ reg = <0x0 0x80000 0x80000>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ partition@0 {
+ label = "OpenBIOS";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index c541fd8..1daa73f 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -165,6 +165,7 @@
void fdt_init(void *blob)
{
int err;
+ int bufsize;
dt_ops.finddevice = fdt_wrapper_finddevice;
dt_ops.getprop = fdt_wrapper_getprop;
@@ -178,16 +179,15 @@
/* Make sure the dt blob is the right version and so forth */
fdt = blob;
- err = fdt_open_into(fdt, fdt, fdt_totalsize(blob));
- if (err == -FDT_ERR_NOSPACE) {
- int bufsize = fdt_totalsize(fdt) + 4;
- buf = malloc(bufsize);
- err = fdt_open_into(fdt, buf, bufsize);
- }
+ bufsize = fdt_totalsize(fdt) + 4;
+ buf = malloc(bufsize);
+ if(!buf)
+ fatal("malloc failed. can't relocate the device tree\n\r");
+
+ err = fdt_open_into(fdt, buf, bufsize);
if (err != 0)
fatal("fdt_init(): %s\n\r", fdt_strerror(err));
- if (buf)
- fdt = buf;
+ fdt = buf;
}
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index 9e7f3dd..ae32801 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -56,9 +56,19 @@
if (platform_ops.vmlinux_alloc) {
addr = platform_ops.vmlinux_alloc(ei.memsize);
} else {
- if ((unsigned long)_start < ei.memsize)
+ /*
+ * Check if the kernel image (without bss) would overwrite the
+ * bootwrapper. The device tree has been moved in fdt_init()
+ * to an area allocated with malloc() (somewhere past _end).
+ */
+ if ((unsigned long)_start < ei.loadsize)
fatal("Insufficient memory for kernel at address 0!"
- " (_start=%p)\n\r", _start);
+ " (_start=%p, uncomressed size=%08x)\n\r",
+ _start, ei.loadsize);
+
+ if ((unsigned long)_end < ei.memsize)
+ fatal("The final kernel image would overwrite the "
+ "device tree\n\r");
}
/* Finally, gunzip the kernel */
diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S
index 643e4cb..acc9428 100644
--- a/arch/powerpc/boot/string.S
+++ b/arch/powerpc/boot/string.S
@@ -235,7 +235,7 @@
.globl memcmp
memcmp:
cmpwi 0,r5,0
- blelr
+ ble 2f
mtctr r5
addi r6,r3,-1
addi r4,r4,-1
@@ -244,6 +244,8 @@
subf. r3,r0,r3
bdnzt 2,1b
blr
+2: li r3,0
+ blr
/*
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ee0dc41..f390735 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -306,11 +306,14 @@
# post-processing needed for some platforms
case "$platform" in
-pseries|chrp)
+pseries)
${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
$objbin/addnote "$ofile" "$ofile".rpanote
rm -r "$ofile".rpanote
;;
+chrp)
+ $objbin/addnote -r c00000 "$ofile"
+ ;;
coff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
$objbin/hack-coff "$ofile"
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
new file mode 100644
index 0000000..39bd9eb4
--- /dev/null
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Mon Oct 13 13:47:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_ACADIA=y
+# CONFIG_EP405 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_PPC40x_SIMPLE=y
+CONFIG_405EZ=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+CONFIG_IBM_NEW_EMAC_DEBUG=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
+CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
+CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
new file mode 100644
index 0000000..682fce0
--- /dev/null
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -0,0 +1,929 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.5
+# Tue Sep 16 00:44:33 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_EP405 is not set
+CONFIG_HCU4=y
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 64e1445..120f4d4 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -12,7 +12,9 @@
#include <asm/asm-compat.h>
#include <asm/kdump.h>
-#include <asm/types.h>
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
/*
* On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
@@ -73,6 +75,7 @@
#if defined(CONFIG_RELOCATABLE)
#ifndef __ASSEMBLY__
+
extern phys_addr_t memstart_addr;
extern phys_addr_t kernstart_addr;
#endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e70d048..b1eb834 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1277,6 +1277,19 @@
.machine_check = machine_check_4xx,
.platform = "ppc405",
},
+ {
+ /* 405EZ */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x41510000,
+ .cpu_name = "405EZ",
+ .cpu_features = CPU_FTRS_40X,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc405",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a168514..4bd8b4f 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -312,11 +312,24 @@
static void __init export_htab_values(void)
{
struct device_node *node;
+ struct property *prop;
node = of_find_node_by_path("/chosen");
if (!node)
return;
+ /* remove any stale propertys so ours can be found */
+ prop = of_find_property(node, kernel_end_prop.name, NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+ prop = of_find_property(node, htab_base_prop.name, NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+ prop = of_find_property(node, htab_size_prop.name, NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+
+ /* information needed by userspace when using default_machine_kexec */
kernel_end = __pa(_end);
prom_add_property(node, &kernel_end_prop);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2fdbc18..23e0db2 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -487,67 +487,6 @@
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
}
-/* We can't use the standard versions because of RELOC headaches. */
-#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
- || ('a' <= (c) && (c) <= 'f') \
- || ('A' <= (c) && (c) <= 'F'))
-
-#define isdigit(c) ('0' <= (c) && (c) <= '9')
-#define islower(c) ('a' <= (c) && (c) <= 'z')
-#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
-
-unsigned long prom_strtoul(const char *cp, const char **endp)
-{
- unsigned long result = 0, base = 10, value;
-
- if (*cp == '0') {
- base = 8;
- cp++;
- if (toupper(*cp) == 'X') {
- cp++;
- base = 16;
- }
- }
-
- while (isxdigit(*cp) &&
- (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
- result = result * base + value;
- cp++;
- }
-
- if (endp)
- *endp = cp;
-
- return result;
-}
-
-unsigned long prom_memparse(const char *ptr, const char **retptr)
-{
- unsigned long ret = prom_strtoul(ptr, retptr);
- int shift = 0;
-
- /*
- * We can't use a switch here because GCC *may* generate a
- * jump table which won't work, because we're not running at
- * the address we're linked at.
- */
- if ('G' == **retptr || 'g' == **retptr)
- shift = 30;
-
- if ('M' == **retptr || 'm' == **retptr)
- shift = 20;
-
- if ('K' == **retptr || 'k' == **retptr)
- shift = 10;
-
- if (shift) {
- ret <<= shift;
- (*retptr)++;
- }
-
- return ret;
-}
-
/*
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 2c7e8e8..ea3a2ec 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr"
+reloc_got2 kernstart_addr memstart_addr"
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index cb01ebc..7b7da8c 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -142,7 +142,7 @@
speed = (clock / prescaler) / (divisor * 16);
/* sanity check */
- if (speed < 0 || speed > (clock / 16))
+ if (speed > (clock / 16))
speed = 9600;
return speed;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6cf5c71..eb505ad 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -116,6 +116,7 @@
/*
* get_node_active_region - Return active region containing start_pfn
+ * Active range returned is empty if none found.
* @start_pfn: The page to return the region for.
* @node_ar: Returned set to the active region containing start_pfn
*/
@@ -126,6 +127,7 @@
node_ar->nid = nid;
node_ar->start_pfn = start_pfn;
+ node_ar->end_pfn = start_pfn;
work_with_active_regions(nid, get_active_region_work_fn, node_ar);
}
@@ -526,12 +528,10 @@
/*
* We use lmb_end_of_DRAM() in here instead of memory_limit because
* we've already adjusted it for the limit and it takes care of
- * having memory holes below the limit.
+ * having memory holes below the limit. Also, in the case of
+ * iommu_is_off, memory_limit is not set but is implicitly enforced.
*/
- if (! memory_limit)
- return size;
-
if (start + size <= lmb_end_of_DRAM())
return size;
@@ -933,18 +933,20 @@
struct node_active_region node_ar;
get_node_active_region(start_pfn, &node_ar);
- while (start_pfn < end_pfn) {
+ while (start_pfn < end_pfn &&
+ node_ar.start_pfn < node_ar.end_pfn) {
+ unsigned long reserve_size = size;
/*
* if reserved region extends past active region
* then trim size to active region
*/
if (end_pfn > node_ar.end_pfn)
- size = (node_ar.end_pfn << PAGE_SHIFT)
+ reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, size,
- node_ar.nid);
+ dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+ reserve_size, node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- size, BOOTMEM_DEFAULT);
+ reserve_size, BOOTMEM_DEFAULT);
/*
* if reserved region is contained in the active region
* then done.
@@ -959,6 +961,7 @@
*/
start_pfn = node_ar.end_pfn;
physbase = start_pfn << PAGE_SHIFT;
+ size = size - reserve_size;
get_node_active_region(start_pfn, &node_ar);
}
diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h
index 22e4e8d..628009c 100644
--- a/arch/powerpc/oprofile/cell/pr_util.h
+++ b/arch/powerpc/oprofile/cell/pr_util.h
@@ -24,6 +24,11 @@
#define SKIP_GENERIC_SYNC 0
#define SYNC_START_ERROR -1
#define DO_GENERIC_SYNC 1
+#define SPUS_PER_NODE 8
+#define DEFAULT_TIMER_EXPIRE (HZ / 10)
+
+extern struct delayed_work spu_work;
+extern int spu_prof_running;
struct spu_overlay_info { /* map of sections within an SPU overlay */
unsigned int vma; /* SPU virtual memory address from elf */
@@ -62,6 +67,14 @@
};
+struct spu_buffer {
+ int last_guard_val;
+ int ctx_sw_seen;
+ unsigned long *buff;
+ unsigned int head, tail;
+};
+
+
/* The three functions below are for maintaining and accessing
* the vma-to-fileoffset map.
*/
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index 380d7e2..6edaebd 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -23,12 +23,11 @@
static u32 *samples;
-static int spu_prof_running;
+int spu_prof_running;
static unsigned int profiling_interval;
#define NUM_SPU_BITS_TRBUF 16
#define SPUS_PER_TB_ENTRY 4
-#define SPUS_PER_NODE 8
#define SPU_PC_MASK 0xFFFF
@@ -208,6 +207,7 @@
spu_prof_running = 1;
hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
+ schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
return 0;
}
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 2a9b4a0..2949126 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -35,7 +35,102 @@
static DEFINE_SPINLOCK(cache_lock);
static int num_spu_nodes;
int spu_prof_num_nodes;
-int last_guard_val[MAX_NUMNODES * 8];
+
+struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
+struct delayed_work spu_work;
+static unsigned max_spu_buff;
+
+static void spu_buff_add(unsigned long int value, int spu)
+{
+ /* spu buff is a circular buffer. Add entries to the
+ * head. Head is the index to store the next value.
+ * The buffer is full when there is one available entry
+ * in the queue, i.e. head and tail can't be equal.
+ * That way we can tell the difference between the
+ * buffer being full versus empty.
+ *
+ * ASSUPTION: the buffer_lock is held when this function
+ * is called to lock the buffer, head and tail.
+ */
+ int full = 1;
+
+ if (spu_buff[spu].head >= spu_buff[spu].tail) {
+ if ((spu_buff[spu].head - spu_buff[spu].tail)
+ < (max_spu_buff - 1))
+ full = 0;
+
+ } else if (spu_buff[spu].tail > spu_buff[spu].head) {
+ if ((spu_buff[spu].tail - spu_buff[spu].head)
+ > 1)
+ full = 0;
+ }
+
+ if (!full) {
+ spu_buff[spu].buff[spu_buff[spu].head] = value;
+ spu_buff[spu].head++;
+
+ if (spu_buff[spu].head >= max_spu_buff)
+ spu_buff[spu].head = 0;
+ } else {
+ /* From the user's perspective make the SPU buffer
+ * size management/overflow look like we are using
+ * per cpu buffers. The user uses the same
+ * per cpu parameter to adjust the SPU buffer size.
+ * Increment the sample_lost_overflow to inform
+ * the user the buffer size needs to be increased.
+ */
+ oprofile_cpu_buffer_inc_smpl_lost();
+ }
+}
+
+/* This function copies the per SPU buffers to the
+ * OProfile kernel buffer.
+ */
+void sync_spu_buff(void)
+{
+ int spu;
+ unsigned long flags;
+ int curr_head;
+
+ for (spu = 0; spu < num_spu_nodes; spu++) {
+ /* In case there was an issue and the buffer didn't
+ * get created skip it.
+ */
+ if (spu_buff[spu].buff == NULL)
+ continue;
+
+ /* Hold the lock to make sure the head/tail
+ * doesn't change while spu_buff_add() is
+ * deciding if the buffer is full or not.
+ * Being a little paranoid.
+ */
+ spin_lock_irqsave(&buffer_lock, flags);
+ curr_head = spu_buff[spu].head;
+ spin_unlock_irqrestore(&buffer_lock, flags);
+
+ /* Transfer the current contents to the kernel buffer.
+ * data can still be added to the head of the buffer.
+ */
+ oprofile_put_buff(spu_buff[spu].buff,
+ spu_buff[spu].tail,
+ curr_head, max_spu_buff);
+
+ spin_lock_irqsave(&buffer_lock, flags);
+ spu_buff[spu].tail = curr_head;
+ spin_unlock_irqrestore(&buffer_lock, flags);
+ }
+
+}
+
+static void wq_sync_spu_buff(struct work_struct *work)
+{
+ /* move data from spu buffers to kernel buffer */
+ sync_spu_buff();
+
+ /* only reschedule if profiling is not done */
+ if (spu_prof_running)
+ schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+}
/* Container for caching information about an active SPU task. */
struct cached_info {
@@ -305,14 +400,21 @@
/* Record context info in event buffer */
spin_lock_irqsave(&buffer_lock, flags);
- add_event_entry(ESCAPE_CODE);
- add_event_entry(SPU_CTX_SWITCH_CODE);
- add_event_entry(spu->number);
- add_event_entry(spu->pid);
- add_event_entry(spu->tgid);
- add_event_entry(app_dcookie);
- add_event_entry(spu_cookie);
- add_event_entry(offset);
+ spu_buff_add(ESCAPE_CODE, spu->number);
+ spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number);
+ spu_buff_add(spu->number, spu->number);
+ spu_buff_add(spu->pid, spu->number);
+ spu_buff_add(spu->tgid, spu->number);
+ spu_buff_add(app_dcookie, spu->number);
+ spu_buff_add(spu_cookie, spu->number);
+ spu_buff_add(offset, spu->number);
+
+ /* Set flag to indicate SPU PC data can now be written out. If
+ * the SPU program counter data is seen before an SPU context
+ * record is seen, the postprocessing will fail.
+ */
+ spu_buff[spu->number].ctx_sw_seen = 1;
+
spin_unlock_irqrestore(&buffer_lock, flags);
smp_wmb(); /* insure spu event buffer updates are written */
/* don't want entries intermingled... */
@@ -360,6 +462,47 @@
return nodes;
}
+static int oprofile_spu_buff_create(void)
+{
+ int spu;
+
+ max_spu_buff = oprofile_get_cpu_buffer_size();
+
+ for (spu = 0; spu < num_spu_nodes; spu++) {
+ /* create circular buffers to store the data in.
+ * use locks to manage accessing the buffers
+ */
+ spu_buff[spu].head = 0;
+ spu_buff[spu].tail = 0;
+
+ /*
+ * Create a buffer for each SPU. Can't reliably
+ * create a single buffer for all spus due to not
+ * enough contiguous kernel memory.
+ */
+
+ spu_buff[spu].buff = kzalloc((max_spu_buff
+ * sizeof(unsigned long)),
+ GFP_KERNEL);
+
+ if (!spu_buff[spu].buff) {
+ printk(KERN_ERR "SPU_PROF: "
+ "%s, line %d: oprofile_spu_buff_create "
+ "failed to allocate spu buffer %d.\n",
+ __func__, __LINE__, spu);
+
+ /* release the spu buffers that have been allocated */
+ while (spu >= 0) {
+ kfree(spu_buff[spu].buff);
+ spu_buff[spu].buff = 0;
+ spu--;
+ }
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
/* The main purpose of this function is to synchronize
* OProfile with SPUFS by registering to be notified of
* SPU task switches.
@@ -372,20 +515,35 @@
*/
int spu_sync_start(void)
{
- int k;
+ int spu;
int ret = SKIP_GENERIC_SYNC;
int register_ret;
unsigned long flags = 0;
spu_prof_num_nodes = number_of_online_nodes();
num_spu_nodes = spu_prof_num_nodes * 8;
+ INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff);
+
+ /* create buffer for storing the SPU data to put in
+ * the kernel buffer.
+ */
+ ret = oprofile_spu_buff_create();
+ if (ret)
+ goto out;
spin_lock_irqsave(&buffer_lock, flags);
- add_event_entry(ESCAPE_CODE);
- add_event_entry(SPU_PROFILING_CODE);
- add_event_entry(num_spu_nodes);
+ for (spu = 0; spu < num_spu_nodes; spu++) {
+ spu_buff_add(ESCAPE_CODE, spu);
+ spu_buff_add(SPU_PROFILING_CODE, spu);
+ spu_buff_add(num_spu_nodes, spu);
+ }
spin_unlock_irqrestore(&buffer_lock, flags);
+ for (spu = 0; spu < num_spu_nodes; spu++) {
+ spu_buff[spu].ctx_sw_seen = 0;
+ spu_buff[spu].last_guard_val = 0;
+ }
+
/* Register for SPU events */
register_ret = spu_switch_event_register(&spu_active);
if (register_ret) {
@@ -393,8 +551,6 @@
goto out;
}
- for (k = 0; k < (MAX_NUMNODES * 8); k++)
- last_guard_val[k] = 0;
pr_debug("spu_sync_start -- running.\n");
out:
return ret;
@@ -446,13 +602,20 @@
* use. We need to discard samples taken during the time
* period which an overlay occurs (i.e., guard value changes).
*/
- if (grd_val && grd_val != last_guard_val[spu_num]) {
- last_guard_val[spu_num] = grd_val;
+ if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) {
+ spu_buff[spu_num].last_guard_val = grd_val;
/* Drop the rest of the samples. */
break;
}
- add_event_entry(file_offset | spu_num_shifted);
+ /* We must ensure that the SPU context switch has been written
+ * out before samples for the SPU. Otherwise, the SPU context
+ * information is not available and the postprocessing of the
+ * SPU PC will fail with no available anonymous map information.
+ */
+ if (spu_buff[spu_num].ctx_sw_seen)
+ spu_buff_add((file_offset | spu_num_shifted),
+ spu_num);
}
spin_unlock(&buffer_lock);
out:
@@ -463,20 +626,41 @@
int spu_sync_stop(void)
{
unsigned long flags = 0;
- int ret = spu_switch_event_unregister(&spu_active);
- if (ret) {
+ int ret;
+ int k;
+
+ ret = spu_switch_event_unregister(&spu_active);
+
+ if (ret)
printk(KERN_ERR "SPU_PROF: "
- "%s, line %d: spu_switch_event_unregister returned %d\n",
- __func__, __LINE__, ret);
- goto out;
- }
+ "%s, line %d: spu_switch_event_unregister " \
+ "returned %d\n",
+ __func__, __LINE__, ret);
+
+ /* flush any remaining data in the per SPU buffers */
+ sync_spu_buff();
spin_lock_irqsave(&cache_lock, flags);
ret = release_cached_info(RELEASE_ALL);
spin_unlock_irqrestore(&cache_lock, flags);
-out:
+
+ /* remove scheduled work queue item rather then waiting
+ * for every queued entry to execute. Then flush pending
+ * system wide buffer to event buffer.
+ */
+ cancel_delayed_work(&spu_work);
+
+ for (k = 0; k < num_spu_nodes; k++) {
+ spu_buff[k].ctx_sw_seen = 0;
+
+ /*
+ * spu_sys_buff will be null if there was a problem
+ * allocating the buffer. Only delete if it exists.
+ */
+ kfree(spu_buff[k].buff);
+ spu_buff[k].buff = 0;
+ }
pr_debug("spu_sync_stop -- done.\n");
return ret;
}
-
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a9260e2..6573027 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -14,6 +14,15 @@
# help
# This option enables support for the CPCI405 board.
+config ACADIA
+ bool "Acadia"
+ depends on 40x
+ default n
+ select PPC40x_SIMPLE
+ select 405EZ
+ help
+ This option enables support for the AMCC 405EZ Acadia evaluation board.
+
config EP405
bool "EP405/EP405PC"
depends on 40x
@@ -23,6 +32,14 @@
help
This option enables support for the EP405/EP405PC boards.
+config HCU4
+ bool "Hcu4"
+ depends on 40x
+ default y
+ select 405GPR
+ help
+ This option enables support for the Nestal Maschinen HCU4 board.
+
config KILAUEA
bool "Kilauea"
depends on 40x
@@ -93,6 +110,13 @@
Most Virtex designs should use this unless it needs to do some
special configuration at board probe time.
+config PPC40x_SIMPLE
+ bool "Simple PowerPC 40x board support"
+ depends on 40x
+ default n
+ help
+ This option enables the simple PowerPC 40x platform support.
+
# 40x specific CPU modules, selected based on the board above.
config NP405H
bool
@@ -118,6 +142,12 @@
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
+config 405EZ
+ bool
+ select IBM_NEW_EMAC_NO_FLOW_CTRL
+ select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ select IBM_NEW_EMAC_MAL_COMMON_ERR
+
config 405GPR
bool
@@ -139,6 +169,14 @@
select IBM405_ERR77
select IBM405_ERR51
+config PPC4xx_GPIO
+ bool "PPC4xx GPIO support"
+ depends on 40x
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ help
+ Enable gpiolib support for ppc40x based boards
+
# 40x errata/workaround config symbols, selected by the CPU models above
# All 405-based cores up until the 405GPR and 405EP have this errata.
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 5533a5c..9bab76a 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,5 +1,7 @@
obj-$(CONFIG_KILAUEA) += kilauea.o
+obj-$(CONFIG_HCU4) += hcu4.o
obj-$(CONFIG_MAKALU) += makalu.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
obj-$(CONFIG_EP405) += ep405.o
+obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o
diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c
new file mode 100644
index 0000000..60b2afe
--- /dev/null
+++ b/arch/powerpc/platforms/40x/hcu4.c
@@ -0,0 +1,61 @@
+/*
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 IBM Corporation
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id hcu4_of_bus[] = {
+ { .compatible = "ibm,plb3", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init hcu4_device_probe(void)
+{
+ of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
+ return 0;
+}
+machine_device_initcall(hcu4, hcu4_device_probe);
+
+static int __init hcu4_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(hcu4) {
+ .name = "HCU4",
+ .probe = hcu4_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
new file mode 100644
index 0000000..4498a86
--- /dev/null
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -0,0 +1,80 @@
+/*
+ * Generic PowerPC 40x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips. This is
+ * mostly used for eval boards or other simple and "generic" 44x boards. If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc40x_of_bus[] = {
+ { .compatible = "ibm,plb3", },
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init ppc40x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc40x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code. This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+ "amcc,acadia"
+};
+
+static int __init ppc40x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(board); i++) {
+ if (of_flat_dt_is_compatible(root, board[i])) {
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+define_machine(ppc40x_simple) {
+ .name = "PowerPC 40x Platform",
+ .probe = ppc40x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 79c1154..3496bc0 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -167,6 +167,14 @@
help
This option enables the simple PowerPC 44x platform support.
+config PPC4xx_GPIO
+ bool "PPC4xx GPIO support"
+ depends on 44x
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ help
+ Enable gpiolib support for ppc440 based boards
+
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 044b4e6..ae7c34f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -99,11 +99,14 @@
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
- /* Disable XLB pipelining
+ /*
+ * Disable XLB pipelining
* (cfr errate 292. We could do this only just before ATA PIO
* transaction and re-enable it afterwards ...)
+ * Not needed on MPC5200B.
*/
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+ if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR)
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
iounmap(xlb);
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index efb3964..c0d86e1 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -54,8 +54,8 @@
#endif
/*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
*/
static cpumask_t of_spin_map;
@@ -208,11 +208,7 @@
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
- if (i % 2 == 0)
- /*
- * Even-numbered logical cpus correspond to
- * primary threads.
- */
+ if (cpu_thread_in_core(i) == 0)
cpu_set(i, of_spin_map);
}
} else {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 010a51f..b73c369 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -548,6 +548,11 @@
int ret;
struct spu_context *ctx = file->private_data;
+ /* pre-check for file position: if we'd return EOF, there's no point
+ * causing a deschedule */
+ if (*pos >= sizeof(ctx->csa.lscsa->gprs))
+ return 0;
+
ret = spu_acquire_saved(ctx);
if (ret)
return ret;
@@ -2426,38 +2431,49 @@
static int spufs_switch_log_open(struct inode *inode, struct file *file)
{
struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+ int rc;
- /*
- * We (ab-)use the mapping_lock here because it serves the similar
- * purpose for synchronizing open/close elsewhere. Maybe it should
- * be renamed eventually.
- */
- mutex_lock(&ctx->mapping_lock);
+ rc = spu_acquire(ctx);
+ if (rc)
+ return rc;
+
if (ctx->switch_log) {
- spin_lock(&ctx->switch_log->lock);
- ctx->switch_log->head = 0;
- ctx->switch_log->tail = 0;
- spin_unlock(&ctx->switch_log->lock);
- } else {
- /*
- * We allocate the switch log data structures on first open.
- * They will never be free because we assume a context will
- * be traced until it goes away.
- */
- ctx->switch_log = kzalloc(sizeof(struct switch_log) +
- SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
- GFP_KERNEL);
- if (!ctx->switch_log)
- goto out;
- spin_lock_init(&ctx->switch_log->lock);
- init_waitqueue_head(&ctx->switch_log->wait);
+ rc = -EBUSY;
+ goto out;
}
- mutex_unlock(&ctx->mapping_lock);
+
+ ctx->switch_log = kmalloc(sizeof(struct switch_log) +
+ SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry),
+ GFP_KERNEL);
+
+ if (!ctx->switch_log) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ ctx->switch_log->head = ctx->switch_log->tail = 0;
+ init_waitqueue_head(&ctx->switch_log->wait);
+ rc = 0;
+
+out:
+ spu_release(ctx);
+ return rc;
+}
+
+static int spufs_switch_log_release(struct inode *inode, struct file *file)
+{
+ struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
+ int rc;
+
+ rc = spu_acquire(ctx);
+ if (rc)
+ return rc;
+
+ kfree(ctx->switch_log);
+ ctx->switch_log = NULL;
+ spu_release(ctx);
return 0;
- out:
- mutex_unlock(&ctx->mapping_lock);
- return -ENOMEM;
}
static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n)
@@ -2485,42 +2501,54 @@
if (!buf || len < 0)
return -EINVAL;
+ error = spu_acquire(ctx);
+ if (error)
+ return error;
+
while (cnt < len) {
char tbuf[128];
int width;
- if (file->f_flags & O_NONBLOCK) {
- if (spufs_switch_log_used(ctx) <= 0)
- return cnt ? cnt : -EAGAIN;
- } else {
- /* Wait for data in buffer */
- error = wait_event_interruptible(ctx->switch_log->wait,
- spufs_switch_log_used(ctx) > 0);
- if (error)
+ if (spufs_switch_log_used(ctx) == 0) {
+ if (cnt > 0) {
+ /* If there's data ready to go, we can
+ * just return straight away */
break;
- }
- spin_lock(&ctx->switch_log->lock);
- if (ctx->switch_log->head == ctx->switch_log->tail) {
- /* multiple readers race? */
- spin_unlock(&ctx->switch_log->lock);
- continue;
+ } else if (file->f_flags & O_NONBLOCK) {
+ error = -EAGAIN;
+ break;
+
+ } else {
+ /* spufs_wait will drop the mutex and
+ * re-acquire, but since we're in read(), the
+ * file cannot be _released (and so
+ * ctx->switch_log is stable).
+ */
+ error = spufs_wait(ctx->switch_log->wait,
+ spufs_switch_log_used(ctx) > 0);
+
+ /* On error, spufs_wait returns without the
+ * state mutex held */
+ if (error)
+ return error;
+
+ /* We may have had entries read from underneath
+ * us while we dropped the mutex in spufs_wait,
+ * so re-check */
+ if (spufs_switch_log_used(ctx) == 0)
+ continue;
+ }
}
width = switch_log_sprint(ctx, tbuf, sizeof(tbuf));
- if (width < len) {
+ if (width < len)
ctx->switch_log->tail =
(ctx->switch_log->tail + 1) %
SWITCH_LOG_BUFSIZE;
- }
-
- spin_unlock(&ctx->switch_log->lock);
-
- /*
- * If the record is greater than space available return
- * partial buffer (so far)
- */
- if (width >= len)
+ else
+ /* If the record is greater than space available return
+ * partial buffer (so far) */
break;
error = copy_to_user(buf + cnt, tbuf, width);
@@ -2529,6 +2557,8 @@
cnt += width;
}
+ spu_release(ctx);
+
return cnt == 0 ? error : cnt;
}
@@ -2537,29 +2567,41 @@
struct inode *inode = file->f_path.dentry->d_inode;
struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
unsigned int mask = 0;
+ int rc;
poll_wait(file, &ctx->switch_log->wait, wait);
+ rc = spu_acquire(ctx);
+ if (rc)
+ return rc;
+
if (spufs_switch_log_used(ctx) > 0)
mask |= POLLIN;
+ spu_release(ctx);
+
return mask;
}
static const struct file_operations spufs_switch_log_fops = {
- .owner = THIS_MODULE,
- .open = spufs_switch_log_open,
- .read = spufs_switch_log_read,
- .poll = spufs_switch_log_poll,
+ .owner = THIS_MODULE,
+ .open = spufs_switch_log_open,
+ .read = spufs_switch_log_read,
+ .poll = spufs_switch_log_poll,
+ .release = spufs_switch_log_release,
};
+/**
+ * Log a context switch event to a switch log reader.
+ *
+ * Must be called with ctx->state_mutex held.
+ */
void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
u32 type, u32 val)
{
if (!ctx->switch_log)
return;
- spin_lock(&ctx->switch_log->lock);
if (spufs_switch_log_avail(ctx) > 1) {
struct switch_log_entry *p;
@@ -2573,7 +2615,6 @@
ctx->switch_log->head =
(ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE;
}
- spin_unlock(&ctx->switch_log->lock);
wake_up(&ctx->switch_log->wait);
}
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c9bb7cf..c58bd36 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -249,6 +249,7 @@
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
+ spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status);
spu_release(ctx);
if (signal_pending(current))
@@ -417,8 +418,6 @@
ret = spu_run_fini(ctx, npc, &status);
spu_yield(ctx);
- spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status);
-
if ((status & SPU_STATUS_STOPPED_BY_STOP) &&
(((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100))
ctx->stats.libassist++;
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 67595bc..2ad914c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,6 +312,15 @@
*/
node = cpu_to_node(raw_smp_processor_id());
for (n = 0; n < MAX_NUMNODES; n++, node++) {
+ /*
+ * "available_spus" counts how many spus are not potentially
+ * going to be used by other affinity gangs whose reference
+ * context is already in place. Although this code seeks to
+ * avoid having affinity gangs with a summed amount of
+ * contexts bigger than the amount of spus in the node,
+ * this may happen sporadically. In this case, available_spus
+ * becomes negative, which is harmless.
+ */
int available_spus;
node = (node < MAX_NUMNODES) ? node : 0;
@@ -321,12 +330,10 @@
available_spus = 0;
mutex_lock(&cbe_spu_info[node].list_mutex);
list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
- if (spu->ctx && spu->ctx->gang
- && spu->ctx->aff_offset == 0)
- available_spus -=
- (spu->ctx->gang->contexts - 1);
- else
- available_spus++;
+ if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset
+ && spu->ctx->gang->aff_ref_spu)
+ available_spus -= spu->ctx->gang->contexts;
+ available_spus++;
}
if (available_spus < ctx->gang->contexts) {
mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -437,6 +444,11 @@
atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
if (ctx->gang)
+ /*
+ * If ctx->gang->aff_sched_count is positive, SPU affinity is
+ * being considered in this gang. Using atomic_dec_if_positive
+ * allow us to skip an explicit check for affinity in this gang
+ */
atomic_dec_if_positive(&ctx->gang->aff_sched_count);
spu_switch_notify(spu, NULL);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 8ae8ef9..15c62d3 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -65,7 +65,6 @@
};
struct switch_log {
- spinlock_t lock;
wait_queue_head_t wait;
unsigned long head;
unsigned long tail;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 92d20e9..a2460e2 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -40,6 +40,7 @@
static ktime_t sputrace_start;
static unsigned long sputrace_head, sputrace_tail;
static struct sputrace *sputrace_log;
+static int sputrace_logging;
static int sputrace_used(void)
{
@@ -79,6 +80,11 @@
char tbuf[128];
int width;
+ /* If we have data ready to return, don't block waiting
+ * for more */
+ if (cnt > 0 && sputrace_used() == 0)
+ break;
+
error = wait_event_interruptible(sputrace_wait,
sputrace_used() > 0);
if (error)
@@ -109,24 +115,49 @@
static int sputrace_open(struct inode *inode, struct file *file)
{
+ int rc;
+
spin_lock(&sputrace_lock);
+ if (sputrace_logging) {
+ rc = -EBUSY;
+ goto out;
+ }
+
+ sputrace_logging = 1;
sputrace_head = sputrace_tail = 0;
sputrace_start = ktime_get();
- spin_unlock(&sputrace_lock);
+ rc = 0;
+out:
+ spin_unlock(&sputrace_lock);
+ return rc;
+}
+
+static int sputrace_release(struct inode *inode, struct file *file)
+{
+ spin_lock(&sputrace_lock);
+ sputrace_logging = 0;
+ spin_unlock(&sputrace_lock);
return 0;
}
static const struct file_operations sputrace_fops = {
- .owner = THIS_MODULE,
- .open = sputrace_open,
- .read = sputrace_read,
+ .owner = THIS_MODULE,
+ .open = sputrace_open,
+ .read = sputrace_read,
+ .release = sputrace_release,
};
static void sputrace_log_item(const char *name, struct spu_context *ctx,
struct spu *spu)
{
spin_lock(&sputrace_lock);
+
+ if (!sputrace_logging) {
+ spin_unlock(&sputrace_lock);
+ return;
+ }
+
if (sputrace_avail() > 1) {
struct sputrace *t = sputrace_log + sputrace_head;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 140d02a..a623ad2 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -22,6 +22,12 @@
int ret;
start_pfn = base >> PAGE_SHIFT;
+
+ if (!pfn_valid(start_pfn)) {
+ lmb_remove(base, lmb_size);
+ return 0;
+ }
+
zone = page_zone(pfn_to_page(start_pfn));
/*
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index e00f96b..1a231c3 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -52,8 +52,8 @@
/*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
+ * The Primary thread of each non-boot processor was started from the OF client
+ * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
*/
static cpumask_t of_spin_map;
@@ -161,8 +161,7 @@
static int smp_pSeries_cpu_bootable(unsigned int nr)
{
/* Special case - we inhibit secondary thread startup
- * during boot if the user requests it. Odd-numbered
- * cpus are assumed to be secondary threads.
+ * during boot if the user requests it.
*/
if (system_state < SYSTEM_RUNNING &&
cpu_has_feature(CPU_FTR_SMT) &&
@@ -199,11 +198,7 @@
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
- if (i % 2 == 0)
- /*
- * Even-numbered logical cpus correspond to
- * primary threads.
- */
+ if (cpu_thread_in_core(i) == 0)
cpu_set(i, of_spin_map);
}
} else {
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a44709a..5afce11 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -37,6 +37,7 @@
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
+obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
obj-$(CONFIG_CPM) += cpm_common.o
obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
new file mode 100644
index 0000000..110efe2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -0,0 +1,217 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+
+#define GPIO_MASK(gpio) (0x80000000 >> (gpio))
+#define GPIO_MASK2(gpio) (0xc0000000 >> ((gpio) * 2))
+
+/* Physical GPIO register layout */
+struct ppc4xx_gpio {
+ __be32 or;
+ __be32 tcr;
+ __be32 osrl;
+ __be32 osrh;
+ __be32 tsrl;
+ __be32 tsrh;
+ __be32 odr;
+ __be32 ir;
+ __be32 rr1;
+ __be32 rr2;
+ __be32 rr3;
+ __be32 reserved1;
+ __be32 isr1l;
+ __be32 isr1h;
+ __be32 isr2l;
+ __be32 isr2h;
+ __be32 isr3l;
+ __be32 isr3h;
+};
+
+struct ppc4xx_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 32 gpios in each gpio controller.
+ */
+
+static inline struct ppc4xx_gpio_chip *
+to_ppc4xx_gpiochip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct ppc4xx_gpio_chip, mm_gc);
+}
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ return in_be32(®s->ir) & GPIO_MASK(gpio);
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ if (val)
+ setbits32(®s->or, GPIO_MASK(gpio));
+ else
+ clrbits32(®s->or, GPIO_MASK(gpio));
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* Disable open-drain function */
+ clrbits32(®s->odr, GPIO_MASK(gpio));
+
+ /* Float the pin */
+ clrbits32(®s->tcr, GPIO_MASK(gpio));
+
+ /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+ if (gpio < 16) {
+ clrbits32(®s->osrl, GPIO_MASK2(gpio));
+ clrbits32(®s->tsrl, GPIO_MASK2(gpio));
+ } else {
+ clrbits32(®s->osrh, GPIO_MASK2(gpio));
+ clrbits32(®s->tsrh, GPIO_MASK2(gpio));
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* First set initial value */
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ /* Disable open-drain function */
+ clrbits32(®s->odr, GPIO_MASK(gpio));
+
+ /* Drive the pin */
+ setbits32(®s->tcr, GPIO_MASK(gpio));
+
+ /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+ if (gpio < 16) {
+ clrbits32(®s->osrl, GPIO_MASK2(gpio));
+ clrbits32(®s->tsrl, GPIO_MASK2(gpio));
+ } else {
+ clrbits32(®s->osrh, GPIO_MASK2(gpio));
+ clrbits32(®s->tsrh, GPIO_MASK2(gpio));
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+ return 0;
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
+ int ret;
+ struct ppc4xx_gpio_chip *ppc4xx_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+ if (!ppc4xx_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&ppc4xx_gc->lock);
+
+ mm_gc = &ppc4xx_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = ppc4xx_gpio_dir_in;
+ gc->direction_output = ppc4xx_gpio_dir_out;
+ gc->get = ppc4xx_gpio_get;
+ gc->set = ppc4xx_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(ppc4xx_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 08e18bc..45dd9bd 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -2,6 +2,7 @@
* Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver
*
* Copyright (C) 2007 Domen Puncer, Telargo, Inc.
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -21,58 +22,45 @@
struct mpc52xx_fec __iomem *regs;
};
-static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
+ int reg, u32 value)
{
struct mpc52xx_fec_mdio_priv *priv = bus->priv;
struct mpc52xx_fec __iomem *fec;
int tries = 100;
- u32 request = FEC_MII_READ_FRAME;
+
+ value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
+ value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
fec = priv->regs;
out_be32(&fec->ievent, FEC_IEVENT_MII);
-
- request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
- request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
- out_be32(&priv->regs->mii_data, request);
+ out_be32(&priv->regs->mii_data, value);
/* wait for it to finish, this takes about 23 us on lite5200b */
while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
udelay(5);
- if (tries == 0)
+ if (!tries)
return -ETIMEDOUT;
- return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK;
+ return value & FEC_MII_DATA_OP_RD ?
+ in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0;
}
-static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
+static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
{
- struct mpc52xx_fec_mdio_priv *priv = bus->priv;
- struct mpc52xx_fec __iomem *fec;
- u32 value = data;
- int tries = 100;
-
- fec = priv->regs;
- out_be32(&fec->ievent, FEC_IEVENT_MII);
-
- value |= FEC_MII_WRITE_FRAME;
- value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
- value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
-
- out_be32(&priv->regs->mii_data, value);
-
- /* wait for request to finish */
- while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
- udelay(5);
-
- if (tries == 0)
- return -ETIMEDOUT;
-
- return 0;
+ return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME);
}
-static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match)
+static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+ u16 data)
+{
+ return mpc52xx_fec_mdio_transfer(bus, phy_id, reg,
+ data | FEC_MII_WRITE_FRAME);
+}
+
+static int mpc52xx_fec_mdio_probe(struct of_device *of,
+ const struct of_device_id *match)
{
struct device *dev = &of->dev;
struct device_node *np = of->node;
@@ -131,7 +119,8 @@
dev_set_drvdata(dev, bus);
/* set MII speed */
- out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
+ out_be32(&priv->regs->mii_speed,
+ ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
/* enable MII interrupt */
out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII);
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index efcf21c..2ee262225 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2604,8 +2604,16 @@
if (of_device_is_compatible(np, "ibm,emac-440ep") ||
of_device_is_compatible(np, "ibm,emac-440gr"))
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
- if (of_device_is_compatible(np, "ibm,emac-405ez"))
+ if (of_device_is_compatible(np, "ibm,emac-405ez")) {
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL
dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
+#else
+ printk(KERN_ERR "%s: Flow control not disabled!\n",
+ np->full_name);
+ return -ENXIO;
+#endif
+ }
+
}
/* Fixup some feature bits based on the device tree */
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 1839d3f..ecf9798 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -280,9 +280,11 @@
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_TXEOBISR, r);
+#ifdef CONFIG_PPC_DCR_NATIVE
if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX));
+#endif
return IRQ_HANDLED;
}
@@ -298,9 +300,11 @@
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_RXEOBISR, r);
+#ifdef CONFIG_PPC_DCR_NATIVE
if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
(mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX));
+#endif
return IRQ_HANDLED;
}
@@ -572,9 +576,18 @@
goto fail;
}
- if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez"))
+ if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) {
+#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \
+ defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR)
mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
MAL_FTR_COMMON_ERR_INT);
+#else
+ printk(KERN_ERR "%s: Support for 405EZ not enabled!\n",
+ ofdev->node->full_name);
+ err = -ENODEV;
+ goto fail;
+#endif
+ }
mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 6a98dc8..24bbef7 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -41,7 +41,7 @@
info.addr = *addr;
- request_module(info.type);
+ request_module("%s", info.type);
result = i2c_new_device(adap, &info);
if (result == NULL) {
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
index ed98227..3768170 100644
--- a/drivers/oprofile/buffer_sync.c
+++ b/drivers/oprofile/buffer_sync.c
@@ -628,3 +628,27 @@
mutex_unlock(&buffer_mutex);
}
+
+/* The function can be used to add a buffer worth of data directly to
+ * the kernel buffer. The buffer is assumed to be a circular buffer.
+ * Take the entries from index start and end at index end, wrapping
+ * at max_entries.
+ */
+void oprofile_put_buff(unsigned long *buf, unsigned int start,
+ unsigned int stop, unsigned int max)
+{
+ int i;
+
+ i = start;
+
+ mutex_lock(&buffer_mutex);
+ while (i != stop) {
+ add_event_entry(buf[i++]);
+
+ if (i >= max)
+ i = 0;
+ }
+
+ mutex_unlock(&buffer_mutex);
+}
+
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index e1bd5a9..7ba39fe 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -38,13 +38,26 @@
void free_cpu_buffers(void)
{
int i;
-
+
for_each_online_cpu(i) {
vfree(per_cpu(cpu_buffer, i).buffer);
per_cpu(cpu_buffer, i).buffer = NULL;
}
}
+unsigned long oprofile_get_cpu_buffer_size(void)
+{
+ return fs_cpu_buffer_size;
+}
+
+void oprofile_cpu_buffer_inc_smpl_lost(void)
+{
+ struct oprofile_cpu_buffer *cpu_buf
+ = &__get_cpu_var(cpu_buffer);
+
+ cpu_buf->sample_lost_overflow++;
+}
+
int alloc_cpu_buffers(void)
{
int i;
diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h
index 5076ed1..84bf324 100644
--- a/drivers/oprofile/event_buffer.h
+++ b/drivers/oprofile/event_buffer.h
@@ -17,6 +17,13 @@
void free_event_buffer(void);
+/**
+ * Add data to the event buffer.
+ * The data passed is free-form, but typically consists of
+ * file offsets, dcookies, context information, and ESCAPE codes.
+ */
+void add_event_entry(unsigned long data);
+
/* wake up the process sleeping on the event file */
void wake_up_buffer_waiter(void);
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
index bcb8f72..5231861 100644
--- a/include/linux/oprofile.h
+++ b/include/linux/oprofile.h
@@ -86,13 +86,6 @@
void oprofile_arch_exit(void);
/**
- * Add data to the event buffer.
- * The data passed is free-form, but typically consists of
- * file offsets, dcookies, context information, and ESCAPE codes.
- */
-void add_event_entry(unsigned long data);
-
-/**
* Add a sample. This may be called from any context. Pass
* smp_processor_id() as cpu.
*/
@@ -162,5 +155,14 @@
/** lock for read/write safety */
extern spinlock_t oprofilefs_lock;
+
+/**
+ * Add the contents of a circular buffer to the event buffer.
+ */
+void oprofile_put_buff(unsigned long *buf, unsigned int start,
+ unsigned int stop, unsigned int max);
+
+unsigned long oprofile_get_cpu_buffer_size(void);
+void oprofile_cpu_buffer_inc_smpl_lost(void);
#endif /* OPROFILE_H */
