Merge tag 'md-3.10-fixes' of git://neil.brown.name/md
Pull md bugfixes from Neil Brown:
"A few bugfixes for md
Some tagged for -stable"
* tag 'md-3.10-fixes' of git://neil.brown.name/md:
md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place
md/raid1,raid10: use freeze_array in place of raise_barrier in various places.
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it.
md: md_stop_writes() should always freeze recovery.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 681d109..9b82377 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5268,8 +5268,8 @@
static void __md_stop_writes(struct mddev *mddev)
{
+ set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
if (mddev->sync_thread) {
- set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_reap_sync_thread(mddev);
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5595118..6e17f81 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -417,7 +417,17 @@
r1_bio->bios[mirror] = NULL;
to_put = bio;
- set_bit(R1BIO_Uptodate, &r1_bio->state);
+ /*
+ * Do not set R1BIO_Uptodate if the current device is
+ * rebuilding or Faulty. This is because we cannot use
+ * such device for properly reading the data back (we could
+ * potentially use it, if the current write would have felt
+ * before rdev->recovery_offset, but for simplicity we don't
+ * check this here.
+ */
+ if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) &&
+ !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags))
+ set_bit(R1BIO_Uptodate, &r1_bio->state);
/* Maybe we can clear some bad blocks. */
if (is_badblock(conf->mirrors[mirror].rdev,
@@ -870,17 +880,17 @@
wake_up(&conf->wait_barrier);
}
-static void freeze_array(struct r1conf *conf)
+static void freeze_array(struct r1conf *conf, int extra)
{
/* stop syncio and normal IO and wait for everything to
* go quite.
* We increment barrier and nr_waiting, and then
- * wait until nr_pending match nr_queued+1
+ * wait until nr_pending match nr_queued+extra
* This is called in the context of one normal IO request
* that has failed. Thus any sync request that might be pending
* will be blocked by nr_pending, and we need to wait for
* pending IO requests to complete or be queued for re-try.
- * Thus the number queued (nr_queued) plus this request (1)
+ * Thus the number queued (nr_queued) plus this request (extra)
* must match the number of pending IOs (nr_pending) before
* we continue.
*/
@@ -888,7 +898,7 @@
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq_cmd(conf->wait_barrier,
- conf->nr_pending == conf->nr_queued+1,
+ conf->nr_pending == conf->nr_queued+extra,
conf->resync_lock,
flush_pending_writes(conf));
spin_unlock_irq(&conf->resync_lock);
@@ -1544,8 +1554,8 @@
* we wait for all outstanding requests to complete.
*/
synchronize_sched();
- raise_barrier(conf);
- lower_barrier(conf);
+ freeze_array(conf, 0);
+ unfreeze_array(conf);
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
@@ -1595,11 +1605,11 @@
*/
struct md_rdev *repl =
conf->mirrors[conf->raid_disks + number].rdev;
- raise_barrier(conf);
+ freeze_array(conf, 0);
clear_bit(Replacement, &repl->flags);
p->rdev = repl;
conf->mirrors[conf->raid_disks + number].rdev = NULL;
- lower_barrier(conf);
+ unfreeze_array(conf);
clear_bit(WantReplacement, &rdev->flags);
} else
clear_bit(WantReplacement, &rdev->flags);
@@ -2195,7 +2205,7 @@
* frozen
*/
if (mddev->ro == 0) {
- freeze_array(conf);
+ freeze_array(conf, 1);
fix_read_error(conf, r1_bio->read_disk,
r1_bio->sector, r1_bio->sectors);
unfreeze_array(conf);
@@ -2780,8 +2790,8 @@
return PTR_ERR(conf);
if (mddev->queue)
- blk_queue_max_write_same_sectors(mddev->queue,
- mddev->chunk_sectors);
+ blk_queue_max_write_same_sectors(mddev->queue, 0);
+
rdev_for_each(rdev, mddev) {
if (!mddev->gendisk)
continue;
@@ -2963,7 +2973,7 @@
return -ENOMEM;
}
- raise_barrier(conf);
+ freeze_array(conf, 0);
/* ok, everything is stopped */
oldpool = conf->r1bio_pool;
@@ -2994,7 +3004,7 @@
conf->raid_disks = mddev->raid_disks = raid_disks;
mddev->delta_disks = 0;
- lower_barrier(conf);
+ unfreeze_array(conf);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 59d4daa..6ddae25 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -490,7 +490,17 @@
sector_t first_bad;
int bad_sectors;
- set_bit(R10BIO_Uptodate, &r10_bio->state);
+ /*
+ * Do not set R10BIO_Uptodate if the current device is
+ * rebuilding or Faulty. This is because we cannot use
+ * such device for properly reading the data back (we could
+ * potentially use it, if the current write would have felt
+ * before rdev->recovery_offset, but for simplicity we don't
+ * check this here.
+ */
+ if (test_bit(In_sync, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags))
+ set_bit(R10BIO_Uptodate, &r10_bio->state);
/* Maybe we can clear some bad blocks. */
if (is_badblock(rdev,
@@ -1055,17 +1065,17 @@
wake_up(&conf->wait_barrier);
}
-static void freeze_array(struct r10conf *conf)
+static void freeze_array(struct r10conf *conf, int extra)
{
/* stop syncio and normal IO and wait for everything to
* go quiet.
* We increment barrier and nr_waiting, and then
- * wait until nr_pending match nr_queued+1
+ * wait until nr_pending match nr_queued+extra
* This is called in the context of one normal IO request
* that has failed. Thus any sync request that might be pending
* will be blocked by nr_pending, and we need to wait for
* pending IO requests to complete or be queued for re-try.
- * Thus the number queued (nr_queued) plus this request (1)
+ * Thus the number queued (nr_queued) plus this request (extra)
* must match the number of pending IOs (nr_pending) before
* we continue.
*/
@@ -1073,7 +1083,7 @@
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq_cmd(conf->wait_barrier,
- conf->nr_pending == conf->nr_queued+1,
+ conf->nr_pending == conf->nr_queued+extra,
conf->resync_lock,
flush_pending_writes(conf));
@@ -1837,8 +1847,8 @@
* we wait for all outstanding requests to complete.
*/
synchronize_sched();
- raise_barrier(conf, 0);
- lower_barrier(conf);
+ freeze_array(conf, 0);
+ unfreeze_array(conf);
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
@@ -2612,7 +2622,7 @@
r10_bio->devs[slot].bio = NULL;
if (mddev->ro == 0) {
- freeze_array(conf);
+ freeze_array(conf, 1);
fix_read_error(conf, mddev, r10_bio);
unfreeze_array(conf);
} else
@@ -3609,8 +3619,7 @@
if (mddev->queue) {
blk_queue_max_discard_sectors(mddev->queue,
mddev->chunk_sectors);
- blk_queue_max_write_same_sectors(mddev->queue,
- mddev->chunk_sectors);
+ blk_queue_max_write_same_sectors(mddev->queue, 0);
blk_queue_io_min(mddev->queue, chunk_size);
if (conf->geo.raid_disks % conf->geo.near_copies)
blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 753f318..05e4a10 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5466,7 +5466,7 @@
if (mddev->major_version == 0 &&
mddev->minor_version > 90)
rdev->recovery_offset = reshape_offset;
-
+
if (rdev->recovery_offset < reshape_offset) {
/* We need to check old and new layout */
if (!only_parity(rdev->raid_disk,
@@ -5589,6 +5589,8 @@
*/
mddev->queue->limits.discard_zeroes_data = 0;
+ blk_queue_max_write_same_sectors(mddev->queue, 0);
+
rdev_for_each(rdev, mddev) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
