| |
| config VIDEO_SAMSUNG_EXYNOS4_IS |
| tristate "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver" |
| depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| depends on OF && COMMON_CLK |
| select V4L2_FWNODE |
| help |
| Say Y here to enable camera host interface devices for |
| Samsung S5P and EXYNOS SoC series. |
| |
| if VIDEO_SAMSUNG_EXYNOS4_IS |
| |
| config VIDEO_EXYNOS4_IS_COMMON |
| tristate |
| |
| config VIDEO_S5P_FIMC |
| tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver" |
| depends on I2C |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select MFD_SYSCON |
| select VIDEO_EXYNOS4_IS_COMMON |
| help |
| This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC camera host |
| interface and video postprocessor (FIMC) devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called s5p-fimc. |
| |
| config VIDEO_S5P_MIPI_CSIS |
| tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" |
| depends on REGULATOR |
| select GENERIC_PHY |
| select V4L2_FWNODE |
| help |
| This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 |
| receiver (MIPI-CSIS) devices. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called s5p-csis. |
| |
| config VIDEO_EXYNOS_FIMC_LITE |
| tristate "EXYNOS FIMC-LITE camera interface driver" |
| depends on I2C |
| depends on SOC_EXYNOS4412 || SOC_EXYNOS5250 || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEO_EXYNOS4_IS_COMMON |
| help |
| This is a V4L2 driver for Samsung EXYNOS4/5 SoC FIMC-LITE camera |
| host interface. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called exynos-fimc-lite. |
| |
| config VIDEO_EXYNOS4_FIMC_IS |
| tristate "EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver" |
| depends on I2C |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| depends on OF |
| select FW_LOADER |
| help |
| This is a V4L2 driver for Samsung EXYNOS4x12 SoC series |
| FIMC-IS (Imaging Subsystem). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called exynos4-fimc-is. |
| |
| config VIDEO_EXYNOS4_ISP_DMA_CAPTURE |
| bool "EXYNOS4x12 FIMC-IS ISP Direct DMA capture support" |
| depends on VIDEO_EXYNOS4_FIMC_IS |
| select VIDEO_EXYNOS4_IS_COMMON |
| default y |
| help |
| This option enables an additional video device node exposing a V4L2 |
| video capture interface for the FIMC-IS ISP raw (Bayer) capture DMA. |
| |
| endif # VIDEO_SAMSUNG_EXYNOS4_IS |
