drivers/iio/adc/max1118.c - linux-mtk - Git at Google

 /*
  * MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs driver
  *
  * Copyright (c) 2017 Akinobu Mita <akinobu.mita@gmail.com>
  *
  * This file is subject to the terms and conditions of version 2 of
  * the GNU General Public License.  See the file COPYING in the main
  * directory of this archive for more details.
  *
  * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1117-MAX1119.pdf
  *
  * SPI interface connections
  *
  * SPI                MAXIM
  * Master  Direction  MAX1117/8/9
  * ------  ---------  -----------
  * nCS        -->     CNVST
  * SCK        -->     SCLK
  * MISO       <--     DOUT
  * ------  ---------  -----------
  */

 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
 #include <linux/regulator/consumer.h>

 enum max1118_id {
 	max1117,
 	max1118,
 	max1119,
 };

 struct max1118 {
 	struct spi_device *spi;
 	struct mutex lock;
 	struct regulator *reg;

 	u8 data ____cacheline_aligned;
 };

 #define MAX1118_CHANNEL(ch)						\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.indexed = 1,						\
 		.channel = (ch),					\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
 		.scan_index = ch,					\
 		.scan_type = {						\
 			.sign = 'u',					\
 			.realbits = 8,					\
 			.storagebits = 8,				\
 		},							\
 	}

 static const struct iio_chan_spec max1118_channels[] = {
 	MAX1118_CHANNEL(0),
 	MAX1118_CHANNEL(1),
 	IIO_CHAN_SOFT_TIMESTAMP(2),
 };

 static int max1118_read(struct spi_device *spi, int channel)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 	struct max1118 *adc = iio_priv(indio_dev);
 	struct spi_transfer xfers[] = {
 		/*
 		 * To select CH1 for conversion, CNVST pin must be brought high
 		 * and low for a second time.
 		 */
 		{
 			.len = 0,
 			.delay_usecs = 1,	/* > CNVST Low Time 100 ns */
 			.cs_change = 1,
 		},
 		/*
 		 * The acquisition interval begins with the falling edge of
 		 * CNVST.  The total acquisition and conversion process takes
 		 * <7.5us.
 		 */
 		{
 			.len = 0,
 			.delay_usecs = 8,
 		},
 		{
 			.rx_buf = &adc->data,
 			.len = 1,
 		},
 	};
 	int ret;

 	if (channel == 0)
 		ret = spi_sync_transfer(spi, xfers + 1, 2);
 	else
 		ret = spi_sync_transfer(spi, xfers, 3);

 	if (ret)
 		return ret;

 	return adc->data;
 }

 static int max1118_get_vref_mV(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 	struct max1118 *adc = iio_priv(indio_dev);
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	int vref_uV;

 	switch (id->driver_data) {
 	case max1117:
 		return 2048;
 	case max1119:
 		return 4096;
 	case max1118:
 		vref_uV = regulator_get_voltage(adc->reg);
 		if (vref_uV < 0)
 			return vref_uV;
 		return vref_uV / 1000;
 	}

 	return -ENODEV;
 }

 static int max1118_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *chan,
 			int *val, int *val2, long mask)
 {
 	struct max1118 *adc = iio_priv(indio_dev);

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&adc->lock);
 		*val = max1118_read(adc->spi, chan->channel);
 		mutex_unlock(&adc->lock);
 		if (*val < 0)
 			return *val;

 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = max1118_get_vref_mV(adc->spi);
 		if (*val < 0)
 			return *val;
 		*val2 = 8;

 		return IIO_VAL_FRACTIONAL_LOG2;
 	}

 	return -EINVAL;
 }

 static const struct iio_info max1118_info = {
 	.read_raw = max1118_read_raw,
 };

 static irqreturn_t max1118_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct max1118 *adc = iio_priv(indio_dev);
 	u8 data[16] = { }; /* 2x 8-bit ADC data + padding + 8 bytes timestamp */
 	int scan_index;
 	int i = 0;

 	mutex_lock(&adc->lock);

 	for_each_set_bit(scan_index, indio_dev->active_scan_mask,
 			indio_dev->masklength) {
 		const struct iio_chan_spec *scan_chan =
 				&indio_dev->channels[scan_index];
 		int ret = max1118_read(adc->spi, scan_chan->channel);

 		if (ret < 0) {
 			dev_warn(&adc->spi->dev,
 				"failed to get conversion data\n");
 			goto out;
 		}

 		data[i] = ret;
 		i++;
 	}
 	iio_push_to_buffers_with_timestamp(indio_dev, data,
 					   iio_get_time_ns(indio_dev));
 out:
 	mutex_unlock(&adc->lock);

 	iio_trigger_notify_done(indio_dev->trig);

 	return IRQ_HANDLED;
 }

 static int max1118_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct max1118 *adc;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	int ret;

 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;

 	adc = iio_priv(indio_dev);
 	adc->spi = spi;
 	mutex_init(&adc->lock);

 	if (id->driver_data == max1118) {
 		adc->reg = devm_regulator_get(&spi->dev, "vref");
 		if (IS_ERR(adc->reg)) {
 			dev_err(&spi->dev, "failed to get vref regulator\n");
 			return PTR_ERR(adc->reg);
 		}
 		ret = regulator_enable(adc->reg);
 		if (ret)
 			return ret;
 	}

 	spi_set_drvdata(spi, indio_dev);

 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->info = &max1118_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = max1118_channels;
 	indio_dev->num_channels = ARRAY_SIZE(max1118_channels);

 	/*
 	 * To reinitiate a conversion on CH0, it is necessary to allow for a
 	 * conversion to be complete and all of the data to be read out.  Once
 	 * a conversion has been completed, the MAX1117/MAX1118/MAX1119 will go
 	 * into AutoShutdown mode until the next conversion is initiated.
 	 */
 	max1118_read(spi, 0);

 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
 					max1118_trigger_handler, NULL);
 	if (ret)
 		goto err_reg_disable;

 	ret = iio_device_register(indio_dev);
 	if (ret)
 		goto err_buffer_cleanup;

 	return 0;

 err_buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
 err_reg_disable:
 	if (id->driver_data == max1118)
 		regulator_disable(adc->reg);

 	return ret;
 }

 static int max1118_remove(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 	struct max1118 *adc = iio_priv(indio_dev);
 	const struct spi_device_id *id = spi_get_device_id(spi);

 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
 	if (id->driver_data == max1118)
 		return regulator_disable(adc->reg);

 	return 0;
 }

 static const struct spi_device_id max1118_id[] = {
 	{ "max1117", max1117 },
 	{ "max1118", max1118 },
 	{ "max1119", max1119 },
 	{}
 };
 MODULE_DEVICE_TABLE(spi, max1118_id);

 #ifdef CONFIG_OF

 static const struct of_device_id max1118_dt_ids[] = {
 	{ .compatible = "maxim,max1117" },
 	{ .compatible = "maxim,max1118" },
 	{ .compatible = "maxim,max1119" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, max1118_dt_ids);

 #endif

 static struct spi_driver max1118_spi_driver = {
 	.driver = {
 		.name = "max1118",
 		.of_match_table = of_match_ptr(max1118_dt_ids),
 	},
 	.probe = max1118_probe,
 	.remove = max1118_remove,
 	.id_table = max1118_id,
 };
 module_spi_driver(max1118_spi_driver);

 MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
 MODULE_DESCRIPTION("MAXIM MAX1117/MAX1118/MAX1119 ADCs driver");
 MODULE_LICENSE("GPL v2");
	/*
	* MAX1117/MAX1118/MAX1119 8-bit, dual-channel ADCs driver
	*
	* Copyright (c) 2017 Akinobu Mita <akinobu.mita@gmail.com>
	*
	* This file is subject to the terms and conditions of version 2 of
	* the GNU General Public License. See the file COPYING in the main
	* directory of this archive for more details.
	*
	* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1117-MAX1119.pdf
	*
	* SPI interface connections
	*
	* SPI MAXIM
	* Master Direction MAX1117/8/9
	* ------ --------- -----------
	* nCS --> CNVST
	* SCK --> SCLK
	* MISO <-- DOUT
	* ------ --------- -----------
	*/

	#include <linux/module.h>
	#include <linux/spi/spi.h>
	#include <linux/iio/iio.h>
	#include <linux/iio/buffer.h>
	#include <linux/iio/triggered_buffer.h>
	#include <linux/iio/trigger_consumer.h>
	#include <linux/regulator/consumer.h>

	enum max1118_id {
	max1117,
	max1118,
	max1119,
	};

	struct max1118 {
	struct spi_device *spi;
	struct mutex lock;
	struct regulator *reg;

	u8 data ____cacheline_aligned;
	};

	#define MAX1118_CHANNEL(ch) \
	{ \
	.type = IIO_VOLTAGE, \
	.indexed = 1, \
	.channel = (ch), \
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
	.scan_index = ch, \
	.scan_type = { \
	.sign = 'u', \
	.realbits = 8, \
	.storagebits = 8, \
	}, \
	}

	static const struct iio_chan_spec max1118_channels[] = {
	MAX1118_CHANNEL(0),
	MAX1118_CHANNEL(1),
	IIO_CHAN_SOFT_TIMESTAMP(2),
	};

	static int max1118_read(struct spi_device *spi, int channel)
	{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct max1118 *adc = iio_priv(indio_dev);
	struct spi_transfer xfers[] = {
	/*
	* To select CH1 for conversion, CNVST pin must be brought high
	* and low for a second time.
	*/
	{
	.len = 0,
	.delay_usecs = 1, /* > CNVST Low Time 100 ns */
	.cs_change = 1,
	},
	/*
	* The acquisition interval begins with the falling edge of
	* CNVST. The total acquisition and conversion process takes
	* <7.5us.
	*/
	{
	.len = 0,
	.delay_usecs = 8,
	},
	{
	.rx_buf = &adc->data,
	.len = 1,
	},
	};
	int ret;

	if (channel == 0)
	ret = spi_sync_transfer(spi, xfers + 1, 2);
	else
	ret = spi_sync_transfer(spi, xfers, 3);

	if (ret)
	return ret;

	return adc->data;
	}

	static int max1118_get_vref_mV(struct spi_device *spi)
	{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct max1118 *adc = iio_priv(indio_dev);
	const struct spi_device_id *id = spi_get_device_id(spi);
	int vref_uV;

	switch (id->driver_data) {
	case max1117:
	return 2048;
	case max1119:
	return 4096;
	case max1118:
	vref_uV = regulator_get_voltage(adc->reg);
	if (vref_uV < 0)
	return vref_uV;
	return vref_uV / 1000;
	}

	return -ENODEV;
	}

	static int max1118_read_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const *chan,
	int val, int val2, long mask)
	{
	struct max1118 *adc = iio_priv(indio_dev);

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
	mutex_lock(&adc->lock);
	*val = max1118_read(adc->spi, chan->channel);
	mutex_unlock(&adc->lock);
	if (*val < 0)
	return *val;

	return IIO_VAL_INT;
	case IIO_CHAN_INFO_SCALE:
	*val = max1118_get_vref_mV(adc->spi);
	if (*val < 0)
	return *val;
	*val2 = 8;

	return IIO_VAL_FRACTIONAL_LOG2;
	}

	return -EINVAL;
	}

	static const struct iio_info max1118_info = {
	.read_raw = max1118_read_raw,
	};

	static irqreturn_t max1118_trigger_handler(int irq, void *p)
	{
	struct iio_poll_func *pf = p;
	struct iio_dev *indio_dev = pf->indio_dev;
	struct max1118 *adc = iio_priv(indio_dev);
	u8 data[16] = { }; /* 2x 8-bit ADC data + padding + 8 bytes timestamp */
	int scan_index;
	int i = 0;

	mutex_lock(&adc->lock);

	for_each_set_bit(scan_index, indio_dev->active_scan_mask,
	indio_dev->masklength) {
	const struct iio_chan_spec *scan_chan =
	&indio_dev->channels[scan_index];
	int ret = max1118_read(adc->spi, scan_chan->channel);

	if (ret < 0) {
	dev_warn(&adc->spi->dev,
	"failed to get conversion data\n");
	goto out;
	}

	data[i] = ret;
	i++;
	}
	iio_push_to_buffers_with_timestamp(indio_dev, data,
	iio_get_time_ns(indio_dev));
	out:
	mutex_unlock(&adc->lock);

	iio_trigger_notify_done(indio_dev->trig);

	return IRQ_HANDLED;
	}

	static int max1118_probe(struct spi_device *spi)
	{
	struct iio_dev *indio_dev;
	struct max1118 *adc;
	const struct spi_device_id *id = spi_get_device_id(spi);
	int ret;

	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
	if (!indio_dev)
	return -ENOMEM;

	adc = iio_priv(indio_dev);
	adc->spi = spi;
	mutex_init(&adc->lock);

	if (id->driver_data == max1118) {
	adc->reg = devm_regulator_get(&spi->dev, "vref");
	if (IS_ERR(adc->reg)) {
	dev_err(&spi->dev, "failed to get vref regulator\n");
	return PTR_ERR(adc->reg);
	}
	ret = regulator_enable(adc->reg);
	if (ret)
	return ret;
	}

	spi_set_drvdata(spi, indio_dev);

	indio_dev->name = spi_get_device_id(spi)->name;
	indio_dev->dev.parent = &spi->dev;
	indio_dev->info = &max1118_info;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->channels = max1118_channels;
	indio_dev->num_channels = ARRAY_SIZE(max1118_channels);

	/*
	* To reinitiate a conversion on CH0, it is necessary to allow for a
	* conversion to be complete and all of the data to be read out. Once
	* a conversion has been completed, the MAX1117/MAX1118/MAX1119 will go
	* into AutoShutdown mode until the next conversion is initiated.
	*/
	max1118_read(spi, 0);

	ret = iio_triggered_buffer_setup(indio_dev, NULL,
	max1118_trigger_handler, NULL);
	if (ret)
	goto err_reg_disable;

	ret = iio_device_register(indio_dev);
	if (ret)
	goto err_buffer_cleanup;

	return 0;

	err_buffer_cleanup:
	iio_triggered_buffer_cleanup(indio_dev);
	err_reg_disable:
	if (id->driver_data == max1118)
	regulator_disable(adc->reg);

	return ret;
	}

	static int max1118_remove(struct spi_device *spi)
	{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct max1118 *adc = iio_priv(indio_dev);
	const struct spi_device_id *id = spi_get_device_id(spi);

	iio_device_unregister(indio_dev);
	iio_triggered_buffer_cleanup(indio_dev);
	if (id->driver_data == max1118)
	return regulator_disable(adc->reg);

	return 0;
	}

	static const struct spi_device_id max1118_id[] = {
	{ "max1117", max1117 },
	{ "max1118", max1118 },
	{ "max1119", max1119 },
	{}
	};
	MODULE_DEVICE_TABLE(spi, max1118_id);

	#ifdef CONFIG_OF

	static const struct of_device_id max1118_dt_ids[] = {
	{ .compatible = "maxim,max1117" },
	{ .compatible = "maxim,max1118" },
	{ .compatible = "maxim,max1119" },
	{},
	};
	MODULE_DEVICE_TABLE(of, max1118_dt_ids);

	#endif

	static struct spi_driver max1118_spi_driver = {
	.driver = {
	.name = "max1118",
	.of_match_table = of_match_ptr(max1118_dt_ids),
	},
	.probe = max1118_probe,
	.remove = max1118_remove,
	.id_table = max1118_id,
	};
	module_spi_driver(max1118_spi_driver);

	MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
	MODULE_DESCRIPTION("MAXIM MAX1117/MAX1118/MAX1119 ADCs driver");
	MODULE_LICENSE("GPL v2");